commit 66c5a26d693712ace6de44228ad90769d1782ad3 Author: Jochen Friedrich Date: Fri Jan 1 14:06:20 2021 +0100 Initial commit diff --git a/CDC/.cproject b/CDC/.cproject new file mode 100644 index 0000000..11f78be --- /dev/null +++ b/CDC/.cproject @@ -0,0 +1,169 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/CDC/.mxproject b/CDC/.mxproject new file mode 100644 index 0000000..33dba5a --- /dev/null +++ b/CDC/.mxproject @@ -0,0 +1,25 @@ +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=3 +HeaderFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Inc/stm32g0xx_it.h +HeaderFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Inc/stm32g0xx_hal_conf.h +HeaderFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Inc/main.h +HeaderFolderListSize=1 +HeaderPath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Inc +HeaderFiles=; +SourceFileListSize=3 +SourceFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Src/stm32g0xx_it.c +SourceFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Src/stm32g0xx_hal_msp.c +SourceFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Src/main.c +SourceFolderListSize=1 +SourcePath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/CDC/Core/Src +SourceFiles=; + +[PreviousLibFiles] +LibFiles=Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ramfunc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h;Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ramfunc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h;Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0c1xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Source/Templates/system_stm32g0xx.c;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_armclang_ltm.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm35p.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv81mml.h; + +[PreviousUsedCubeIDEFiles] +SourceFiles=Core/Src/main.c;Core/Src/stm32g0xx_it.c;Core/Src/stm32g0xx_hal_msp.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c;Core/Src/system_stm32g0xx.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c;Core/Src/system_stm32g0xx.c;Drivers/CMSIS/Device/ST/STM32G0xx/Source/Templates/system_stm32g0xx.c;; +HeaderPath=Drivers/STM32G0xx_HAL_Driver/Inc;Drivers/STM32G0xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32G0xx/Include;Drivers/CMSIS/Include;Core/Inc; +CDefines=USE_HAL_DRIVER;STM32G0C1xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + diff --git a/CDC/.project b/CDC/.project new file mode 100644 index 0000000..0453375 --- /dev/null +++ b/CDC/.project @@ -0,0 +1,33 @@ + + + CDC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + com.st.stm32cube.ide.mcu.MCUProjectNature + com.st.stm32cube.ide.mcu.MCUCubeProjectNature + org.eclipse.cdt.core.cnature + com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature + com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature + com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature + com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature + com.st.stm32cube.ide.mcu.MCURootProjectNature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/CDC/.settings/language.settings.xml b/CDC/.settings/language.settings.xml new file mode 100644 index 0000000..956ceb6 --- /dev/null +++ b/CDC/.settings/language.settings.xml @@ -0,0 +1,27 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/CDC/.settings/stm32cubeide.project.prefs b/CDC/.settings/stm32cubeide.project.prefs new file mode 100644 index 0000000..325aa43 --- /dev/null +++ b/CDC/.settings/stm32cubeide.project.prefs @@ -0,0 +1,3 @@ +635E684B79701B039C64EA45C3F84D30=CE925D47F4F30FAA5D1866A637B1C030 +DC22A860405A8BF2F2C095E5B6529F12=72523CF8F399A73BA2E0F710A9B229B1 +eclipse.preferences.version=1 diff --git a/CDC/CDC.ioc b/CDC/CDC.ioc new file mode 100644 index 0000000..c2519b8 --- /dev/null +++ b/CDC/CDC.ioc @@ -0,0 +1,429 @@ +#MicroXplorer Configuration settings - do not modify +ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1 +ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master,SelectedChannel +ADC1.NbrOfConversionFlag=1 +ADC1.Rank-0\#ChannelRegularConversion=1 +ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1 +ADC1.SelectedChannel=ADC_CHANNEL_1|ADC_CHANNEL_2|ADC_CHANNEL_3|ADC_CHANNEL_6|ADC_CHANNEL_8|ADC_CHANNEL_10|ADC_CHANNEL_11 +ADC1.master=1 +DAC1.DAC_Channel-DAC_OUT2=DAC_CHANNEL_2 +DAC1.IPParameters=DAC_Channel-DAC_OUT2 +File.Version=6 +KeepUserPlacement=false +Mcu.Family=STM32G0 +Mcu.IP0=ADC1 +Mcu.IP1=DAC1 +Mcu.IP10=USB_DRD_FS +Mcu.IP2=FDCAN1 +Mcu.IP3=FDCAN2 +Mcu.IP4=I2C1 +Mcu.IP5=NVIC +Mcu.IP6=RCC +Mcu.IP7=SYS +Mcu.IP8=USART1 +Mcu.IP9=USART3 +Mcu.IPNb=11 +Mcu.Name=STM32G0C1V(C-E)Tx +Mcu.Package=LQFP100 +Mcu.Pin0=PB9 +Mcu.Pin1=PC10 +Mcu.Pin10=PC2 +Mcu.Pin11=PC3 +Mcu.Pin12=PA0 +Mcu.Pin13=PA1 +Mcu.Pin14=PA2 +Mcu.Pin15=PA3 +Mcu.Pin16=PA4 +Mcu.Pin17=PA5 +Mcu.Pin18=PA6 +Mcu.Pin19=PA7 +Mcu.Pin2=PC11 +Mcu.Pin20=PC4 +Mcu.Pin21=PC5 +Mcu.Pin22=PB0 +Mcu.Pin23=PB1 +Mcu.Pin24=PB2 +Mcu.Pin25=PB10 +Mcu.Pin26=PB12 +Mcu.Pin27=PB15 +Mcu.Pin28=PA8 +Mcu.Pin29=PA9 +Mcu.Pin3=PC13 +Mcu.Pin30=PC6 +Mcu.Pin31=PC7 +Mcu.Pin32=PD8 +Mcu.Pin33=PD9 +Mcu.Pin34=PD12 +Mcu.Pin35=PD13 +Mcu.Pin36=PD14 +Mcu.Pin37=PD15 +Mcu.Pin38=PA10 +Mcu.Pin39=PA11 [PA9] +Mcu.Pin4=PC14-OSC32_IN (PC14) +Mcu.Pin40=PA12 [PA10] +Mcu.Pin41=PA13 +Mcu.Pin42=PA14-BOOT0 +Mcu.Pin43=PC8 +Mcu.Pin44=PC9 +Mcu.Pin45=PD0 +Mcu.Pin46=PD1 +Mcu.Pin47=PD2 +Mcu.Pin48=PD3 +Mcu.Pin49=PD4 +Mcu.Pin5=PC15-OSC32_OUT (PC15) +Mcu.Pin50=PD5 +Mcu.Pin51=PD6 +Mcu.Pin52=PB3 +Mcu.Pin53=PB5 +Mcu.Pin54=PE0 +Mcu.Pin55=PE1 +Mcu.Pin56=PB6 +Mcu.Pin57=PB7 +Mcu.Pin58=PB8 +Mcu.Pin59=VP_SYS_VS_Systick +Mcu.Pin6=PF0-OSC_IN (PF0) +Mcu.Pin60=VP_SYS_VS_DBSignals +Mcu.Pin7=PF1-OSC_OUT (PF1) +Mcu.Pin8=PC0 +Mcu.Pin9=PC1 +Mcu.PinsNb=61 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32G0C1VETx +MxCube.Version=6.1.0 +MxDb.Version=DB.6.0.10 +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +PA0.GPIOParameters=GPIO_Label +PA0.GPIO_Label=JOY_SEL +PA0.Locked=true +PA0.Signal=GPXTI0 +PA1.GPIOParameters=GPIO_Label +PA1.GPIO_Label=MC_BusVoltage +PA1.Locked=true +PA1.Mode=IN1 +PA1.Signal=ADC1_IN1 +PA10.GPIOParameters=GPIO_Label +PA10.GPIO_Label=MC_WH +PA10.Locked=true +PA10.Signal=S_TIM1_CH3 +PA11\ [PA9].Locked=true +PA11\ [PA9].Mode=Device +PA11\ [PA9].Signal=USB_DM +PA12\ [PA10].Locked=true +PA12\ [PA10].Mode=Device +PA12\ [PA10].Signal=USB_DP +PA13.Locked=true +PA13.Mode=Serial_Wire +PA13.Signal=SYS_SWDIO +PA14-BOOT0.Locked=true +PA14-BOOT0.Mode=Serial_Wire +PA14-BOOT0.Signal=SYS_SWCLK +PA2.GPIOParameters=GPIO_Label +PA2.GPIO_Label=MC_CurrentA +PA2.Locked=true +PA2.Mode=IN2 +PA2.Signal=ADC1_IN2 +PA3.Locked=true +PA3.Mode=IN3 +PA3.Signal=ADC1_IN3 +PA4.GPIOParameters=GPIO_Label +PA4.GPIO_Label=Audio_OUT_L [TS488IQT_VIN1] +PA4.Locked=true +PA4.Signal=COMP_DAC11_group +PA5.GPIOParameters=GPIO_Label +PA5.GPIO_Label=Audio_OUT_R [TS488IQT_VIN2] +PA5.Locked=true +PA5.Signal=COMP_DAC12_group +PA6.GPIOParameters=GPIO_Label +PA6.GPIO_Label=AUdio_IN +PA6.Locked=true +PA6.Mode=IN6 +PA6.Signal=ADC1_IN6 +PA7.Locked=true +PA7.Signal=SPI1_MOSI +PA8.GPIOParameters=GPIO_Label +PA8.GPIO_Label=MC_UH +PA8.Locked=true +PA8.Signal=S_TIM1_CH1 +PA9.GPIOParameters=GPIO_Label +PA9.GPIO_Label=MC_VH +PA9.Locked=true +PA9.Signal=S_TIM1_CH2 +PB0.GPIOParameters=GPIO_Label +PB0.GPIO_Label=MC_EnIndex +PB0.Locked=true +PB0.Mode=IN8 +PB0.Signal=ADC1_IN8 +PB1.GPIOParameters=GPIO_Label +PB1.GPIO_Label=MC_PFCpwm +PB1.Locked=true +PB1.Signal=S_TIM3_CH4 +PB10.GPIOParameters=GPIO_Label +PB10.GPIO_Label=MC_CurrentC +PB10.Locked=true +PB10.Mode=IN11 +PB10.Signal=ADC1_IN11 +PB12.GPIOParameters=GPIO_Label +PB12.GPIO_Label=MC_EmergencySTOP +PB12.Locked=true +PB12.Signal=TIM1_BK +PB15.GPIOParameters=GPIO_Label +PB15.GPIO_Label=MC_DissipativeBrake +PB15.Locked=true +PB15.Signal=GPIO_Output +PB2.GPIOParameters=GPIO_Label +PB2.GPIO_Label=Potentiometer +PB2.Locked=true +PB2.Mode=IN10 +PB2.Signal=ADC1_IN10 +PB3.Locked=true +PB3.Signal=SPI1_SCK +PB5.GPIOParameters=GPIO_Label +PB5.GPIO_Label=MC_EnB +PB5.Locked=true +PB5.Signal=S_TIM3_CH2 +PB6.Locked=true +PB6.Mode=I2C +PB6.Signal=I2C1_SCL +PB7.Locked=true +PB7.Mode=I2C +PB7.Signal=I2C1_SDA +PB8.GPIOParameters=GPIO_Label,GPIO_ModeDefaultOutputPP +PB8.GPIO_Label=LCD_CS_OD +PB8.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD +PB8.Locked=true +PB8.Signal=GPIO_Output +PB9.GPIOParameters=GPIO_Label +PB9.GPIO_Label=MC_NTC +PB9.Locked=true +PB9.Signal=GPIO_Output +PC0.GPIOParameters=GPIO_Label,GPIO_ModeDefaultOutputPP +PC0.GPIO_Label=EX_RESET_OD +PC0.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD +PC0.Locked=true +PC0.Signal=GPIO_Output +PC1.GPIOParameters=GPIO_Label +PC1.GPIO_Label=MC_PFCsync1 +PC1.Locked=true +PC1.Signal=LPTIM1_OUT +PC10.GPIOParameters=GPIO_Label +PC10.GPIO_Label=VCP_TX +PC10.Locked=true +PC10.Mode=Asynchronous +PC10.Signal=USART3_TX +PC11.GPIOParameters=GPIO_Label +PC11.GPIO_Label=VCP_RX +PC11.Locked=true +PC11.Mode=Asynchronous +PC11.Signal=USART3_RX +PC13.GPIOParameters=GPIO_Label +PC13.GPIO_Label=Tamper_key +PC13.Locked=true +PC13.Signal=RTC_TAMP_IN1 +PC14-OSC32_IN\ (PC14).Locked=true +PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator +PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN +PC15-OSC32_OUT\ (PC15).Locked=true +PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator +PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT +PC2.GPIOParameters=GPIO_Label +PC2.GPIO_Label=JOY_UP +PC2.Locked=true +PC2.Signal=GPIO_Input +PC3.GPIOParameters=GPIO_Label +PC3.GPIO_Label=JOY_DOWN +PC3.Locked=true +PC3.Signal=GPIO_Input +PC4.Locked=true +PC4.Mode=Asynchronous +PC4.Signal=USART1_TX +PC5.Locked=true +PC5.Mode=Asynchronous +PC5.Signal=USART1_RX +PC6.GPIOParameters=GPIO_Label +PC6.GPIO_Label=MC_EnA +PC6.Locked=true +PC6.Signal=S_TIM3_CH1 +PC7.GPIOParameters=GPIO_Label +PC7.GPIO_Label=JOY_RIGHT +PC7.Locked=true +PC7.Signal=GPIO_Input +PC8.GPIOParameters=GPIO_Label +PC8.GPIO_Label=JOY_LEFT +PC8.Locked=true +PC8.Signal=GPIO_Input +PC9.GPIOParameters=GPIO_Label +PC9.GPIO_Label=SDcard_detect +PC9.Locked=true +PC9.Signal=GPXTI9 +PD0.GPIOParameters=GPIO_Label +PD0.GPIO_Label=MC_PFCsync2 +PD0.Locked=true +PD0.Signal=S_TIM16_CH1 +PD1.GPIOParameters=GPIO_Label,GPIO_ModeDefaultOutputPP +PD1.GPIO_Label=MicroSD_CS_OD +PD1.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD +PD1.Locked=true +PD1.Signal=GPIO_Output +PD12.Locked=true +PD12.Mode=FDCAN_Activate +PD12.Signal=FDCAN1_RX +PD13.Locked=true +PD13.Mode=FDCAN_Activate +PD13.Signal=FDCAN1_TX +PD14.Locked=true +PD14.Mode=FDCAN_Activate +PD14.Signal=FDCAN2_RX +PD15.Locked=true +PD15.Mode=FDCAN_Activate +PD15.Signal=FDCAN2_TX +PD2.GPIOParameters=GPIO_Label +PD2.GPIO_Label=MC_UL +PD2.Locked=true +PD2.Signal=TIM1_CH1N +PD3.GPIOParameters=GPIO_Label +PD3.GPIO_Label=MC_VL +PD3.Locked=true +PD3.Signal=TIM1_CH2N +PD4.GPIOParameters=GPIO_Label +PD4.GPIO_Label=MC_WL +PD4.Locked=true +PD4.Signal=TIM1_CH3N +PD5.GPIOParameters=GPIO_Label +PD5.GPIO_Label=LED1 +PD5.Locked=true +PD5.Signal=GPIO_Output +PD6.GPIOParameters=GPIO_Label +PD6.GPIO_Label=LED2 +PD6.Locked=true +PD6.Signal=GPIO_Output +PD8.GPIOParameters=GPIO_Label +PD8.GPIO_Label=LED3 +PD8.Locked=true +PD8.Signal=GPIO_Output +PD9.GPIOParameters=GPIO_Label +PD9.GPIO_Label=LED4 +PD9.Locked=true +PD9.Signal=GPIO_Output +PE0.GPIOParameters=GPIO_Label +PE0.GPIO_Label=FDCAN1_STBY +PE0.Locked=true +PE0.Signal=GPIO_Output +PE1.GPIOParameters=GPIO_Label +PE1.GPIO_Label=FDCAN2_STBY +PE1.Locked=true +PE1.Signal=GPIO_Output +PF0-OSC_IN\ (PF0).Locked=true +PF0-OSC_IN\ (PF0).Mode=HSE-External-Oscillator +PF0-OSC_IN\ (PF0).Signal=RCC_OSC_IN +PF1-OSC_OUT\ (PF1).Locked=true +PF1-OSC_OUT\ (PF1).Mode=HSE-External-Oscillator +PF1-OSC_OUT\ (PF1).Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32G0C1VETx +ProjectManager.FirmwarePackage=STM32Cube FW_G0 V1.4.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CDC.ioc +ProjectManager.ProjectName=CDC +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=STM32CubeIDE +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_ADC1_Init-ADC1-false-HAL-true,4-MX_DAC1_Init-DAC1-false-HAL-true,5-MX_FDCAN1_Init-FDCAN1-false-HAL-true,6-MX_FDCAN2_Init-FDCAN2-false-HAL-true,7-MX_I2C1_Init-I2C1-false-HAL-true,8-MX_USART1_UART_Init-USART1-false-HAL-true,9-MX_USART3_UART_Init-USART3-false-HAL-true,10-MX_USB_DRD_FS_PCD_Init-USB_DRD_FS-false-HAL-true +RCC.AHBFreq_Value=16000000 +RCC.APBFreq_Value=16000000 +RCC.APBTimFreq_Value=16000000 +RCC.CECFreq_Value=32786.88524590164 +RCC.CortexFreq_Value=16000000 +RCC.EXTERNAL_CLOCK_VALUE=48000 +RCC.FCLKCortexFreq_Value=16000000 +RCC.FDCANFreq_Value=16000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=16000000 +RCC.HSE_VALUE=8000000 +RCC.HSI48_VALUE=48000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=16000000 +RCC.I2C2Freq_Value=16000000 +RCC.I2S1Freq_Value=16000000 +RCC.I2S2Freq_Value=16000000 +RCC.IPParameters=AHBFreq_Value,APBFreq_Value,APBTimFreq_Value,CECFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FDCANFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2S1Freq_Value,I2S2Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LPUART2Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,RNGFreq_Value,SYSCLKFreq_VALUE,TIM15Freq_Value,TIM1Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value +RCC.LPTIM1Freq_Value=16000000 +RCC.LPTIM2Freq_Value=16000000 +RCC.LPUART1Freq_Value=16000000 +RCC.LPUART2Freq_Value=16000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=16000000 +RCC.MCO2PinFreq_Value=16000000 +RCC.PLLPoutputFreq_Value=64000000 +RCC.PLLQoutputFreq_Value=64000000 +RCC.PLLRCLKFreq_Value=64000000 +RCC.PWRFreq_Value=16000000 +RCC.RNGFreq_Value=2000000 +RCC.SYSCLKFreq_VALUE=16000000 +RCC.TIM15Freq_Value=16000000 +RCC.TIM1Freq_Value=16000000 +RCC.USART1Freq_Value=16000000 +RCC.USART2Freq_Value=16000000 +RCC.USART3Freq_Value=16000000 +RCC.USBFreq_Value=48000000 +RCC.VCOInputFreq_Value=16000000 +RCC.VCOOutputFreq_Value=128000000 +SH.COMP_DAC11_group.0=DAC1_OUT1,DAC_OUT1 +SH.COMP_DAC11_group.ConfNb=1 +SH.COMP_DAC12_group.0=DAC1_OUT2,DAC_OUT2 +SH.COMP_DAC12_group.ConfNb=1 +SH.GPXTI0.0=GPIO_EXTI0 +SH.GPXTI0.ConfNb=1 +SH.GPXTI9.0=GPIO_EXTI9 +SH.GPXTI9.ConfNb=1 +SH.S_TIM16_CH1.0=TIM16_CH1 +SH.S_TIM16_CH1.ConfNb=1 +SH.S_TIM1_CH1.0=TIM1_CH1 +SH.S_TIM1_CH1.ConfNb=1 +SH.S_TIM1_CH2.0=TIM1_CH2 +SH.S_TIM1_CH2.ConfNb=1 +SH.S_TIM1_CH3.0=TIM1_CH3 +SH.S_TIM1_CH3.ConfNb=1 +SH.S_TIM3_CH1.0=TIM3_CH1 +SH.S_TIM3_CH1.ConfNb=1 +SH.S_TIM3_CH2.0=TIM3_CH2 +SH.S_TIM3_CH2.ConfNb=1 +SH.S_TIM3_CH4.0=TIM3_CH4 +SH.S_TIM3_CH4.ConfNb=1 +USART1.IPParameters=VirtualMode-Asynchronous +USART1.VirtualMode-Asynchronous=VM_ASYNC +USART3.IPParameters=VirtualMode-Asynchronous,WordLength +USART3.VirtualMode-Asynchronous=VM_ASYNC +USART3.WordLength=WORDLENGTH_7B +VP_SYS_VS_DBSignals.Mode=DisableDeadBatterySignals +VP_SYS_VS_DBSignals.Signal=SYS_VS_DBSignals +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=STM32G0C1E-EV +boardIOC=true +isbadioc=false diff --git a/CDC/Core/Inc/main.h b/CDC/Core/Inc/main.h new file mode 100644 index 0000000..dac51c0 --- /dev/null +++ b/CDC/Core/Inc/main.h @@ -0,0 +1,151 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define MC_NTC_Pin GPIO_PIN_9 +#define MC_NTC_GPIO_Port GPIOB +#define VCP_TX_Pin GPIO_PIN_10 +#define VCP_TX_GPIO_Port GPIOC +#define VCP_RX_Pin GPIO_PIN_11 +#define VCP_RX_GPIO_Port GPIOC +#define Tamper_key_Pin GPIO_PIN_13 +#define Tamper_key_GPIO_Port GPIOC +#define EX_RESET_OD_Pin GPIO_PIN_0 +#define EX_RESET_OD_GPIO_Port GPIOC +#define MC_PFCsync1_Pin GPIO_PIN_1 +#define MC_PFCsync1_GPIO_Port GPIOC +#define JOY_UP_Pin GPIO_PIN_2 +#define JOY_UP_GPIO_Port GPIOC +#define JOY_DOWN_Pin GPIO_PIN_3 +#define JOY_DOWN_GPIO_Port GPIOC +#define JOY_SEL_Pin GPIO_PIN_0 +#define JOY_SEL_GPIO_Port GPIOA +#define MC_BusVoltage_Pin GPIO_PIN_1 +#define MC_BusVoltage_GPIO_Port GPIOA +#define MC_CurrentA_Pin GPIO_PIN_2 +#define MC_CurrentA_GPIO_Port GPIOA +#define Audio_OUT_L_Pin GPIO_PIN_4 +#define Audio_OUT_L_GPIO_Port GPIOA +#define Audio_OUT_R_Pin GPIO_PIN_5 +#define Audio_OUT_R_GPIO_Port GPIOA +#define AUdio_IN_Pin GPIO_PIN_6 +#define AUdio_IN_GPIO_Port GPIOA +#define MC_EnIndex_Pin GPIO_PIN_0 +#define MC_EnIndex_GPIO_Port GPIOB +#define MC_PFCpwm_Pin GPIO_PIN_1 +#define MC_PFCpwm_GPIO_Port GPIOB +#define Potentiometer_Pin GPIO_PIN_2 +#define Potentiometer_GPIO_Port GPIOB +#define MC_CurrentC_Pin GPIO_PIN_10 +#define MC_CurrentC_GPIO_Port GPIOB +#define MC_EmergencySTOP_Pin GPIO_PIN_12 +#define MC_EmergencySTOP_GPIO_Port GPIOB +#define MC_DissipativeBrake_Pin GPIO_PIN_15 +#define MC_DissipativeBrake_GPIO_Port GPIOB +#define MC_UH_Pin GPIO_PIN_8 +#define MC_UH_GPIO_Port GPIOA +#define MC_VH_Pin GPIO_PIN_9 +#define MC_VH_GPIO_Port GPIOA +#define MC_EnA_Pin GPIO_PIN_6 +#define MC_EnA_GPIO_Port GPIOC +#define JOY_RIGHT_Pin GPIO_PIN_7 +#define JOY_RIGHT_GPIO_Port GPIOC +#define LED3_Pin GPIO_PIN_8 +#define LED3_GPIO_Port GPIOD +#define LED4_Pin GPIO_PIN_9 +#define LED4_GPIO_Port GPIOD +#define MC_WH_Pin GPIO_PIN_10 +#define MC_WH_GPIO_Port GPIOA +#define JOY_LEFT_Pin GPIO_PIN_8 +#define JOY_LEFT_GPIO_Port GPIOC +#define SDcard_detect_Pin GPIO_PIN_9 +#define SDcard_detect_GPIO_Port GPIOC +#define MC_PFCsync2_Pin GPIO_PIN_0 +#define MC_PFCsync2_GPIO_Port GPIOD +#define MicroSD_CS_OD_Pin GPIO_PIN_1 +#define MicroSD_CS_OD_GPIO_Port GPIOD +#define MC_UL_Pin GPIO_PIN_2 +#define MC_UL_GPIO_Port GPIOD +#define MC_VL_Pin GPIO_PIN_3 +#define MC_VL_GPIO_Port GPIOD +#define MC_WL_Pin GPIO_PIN_4 +#define MC_WL_GPIO_Port GPIOD +#define LED1_Pin GPIO_PIN_5 +#define LED1_GPIO_Port GPIOD +#define LED2_Pin GPIO_PIN_6 +#define LED2_GPIO_Port GPIOD +#define MC_EnB_Pin GPIO_PIN_5 +#define MC_EnB_GPIO_Port GPIOB +#define FDCAN1_STBY_Pin GPIO_PIN_0 +#define FDCAN1_STBY_GPIO_Port GPIOE +#define FDCAN2_STBY_Pin GPIO_PIN_1 +#define FDCAN2_STBY_GPIO_Port GPIOE +#define LCD_CS_OD_Pin GPIO_PIN_8 +#define LCD_CS_OD_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Core/Inc/stm32g0xx_hal_conf.h b/CDC/Core/Inc/stm32g0xx_hal_conf.h new file mode 100644 index 0000000..0406d9d --- /dev/null +++ b/CDC/Core/Inc/stm32g0xx_hal_conf.h @@ -0,0 +1,352 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CONF_H +#define STM32G0xx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +#define HAL_DAC_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_FDCAN_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_CEC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u +#define USE_HAL_HCD_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_I2S_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_PCD_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ +#endif + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S1 peripheral + * This value is used by the RCC HAL module to compute the I2S1 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S1_CLOCK_VALUE) +#define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/ +#endif /* EXTERNAL_I2S1_CLOCK_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief External clock source for I2S2 peripheral + * This value is used by the RCC HAL module to compute the I2S2 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S2_CLOCK_VALUE) + #define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/ +#endif /* EXTERNAL_I2S2_CLOCK_VALUE */ +#endif + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include modules header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32g0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32g0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32g0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32g0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32g0xx_hal_adc.h" +#include "stm32g0xx_hal_adc_ex.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32g0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32g0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32g0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32g0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32g0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32g0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32g0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32g0xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32g0xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32g0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32g0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32g0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32g0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32g0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32g0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32g0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32g0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32g0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32g0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32g0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32g0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32g0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32g0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32g0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32g0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Core/Inc/stm32g0xx_it.h b/CDC/Core/Inc/stm32g0xx_it.h new file mode 100644 index 0000000..1843a32 --- /dev/null +++ b/CDC/Core/Inc/stm32g0xx_it.h @@ -0,0 +1,65 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32G0xx_IT_H +#define __STM32G0xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void SVC_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32G0xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Core/Src/main.c b/CDC/Core/Src/main.c new file mode 100644 index 0000000..6806747 --- /dev/null +++ b/CDC/Core/Src/main.c @@ -0,0 +1,757 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +ADC_HandleTypeDef hadc1; + +DAC_HandleTypeDef hdac1; + +FDCAN_HandleTypeDef hfdcan1; +FDCAN_HandleTypeDef hfdcan2; + +I2C_HandleTypeDef hi2c1; + +UART_HandleTypeDef huart1; +UART_HandleTypeDef huart3; + +PCD_HandleTypeDef hpcd_USB_DRD_FS; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_ADC1_Init(void); +static void MX_DAC1_Init(void); +static void MX_FDCAN1_Init(void); +static void MX_FDCAN2_Init(void); +static void MX_I2C1_Init(void); +static void MX_USART1_UART_Init(void); +static void MX_USART3_UART_Init(void); +static void MX_USB_DRD_FS_PCD_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_ADC1_Init(); + MX_DAC1_Init(); + MX_FDCAN1_Init(); + MX_FDCAN2_Init(); + MX_I2C1_Init(); + MX_USART1_UART_Init(); + MX_USART3_UART_Init(); + MX_USB_DRD_FS_PCD_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the peripherals clocks + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_FDCAN|RCC_PERIPHCLK_USART1 + |RCC_PERIPHCLK_USART3|RCC_PERIPHCLK_I2C1 + |RCC_PERIPHCLK_USB|RCC_PERIPHCLK_ADC; + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1; + PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1; + PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK; + PeriphClkInit.Usart3ClockSelection = RCC_USART3CLKSOURCE_PCLK1; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + PeriphClkInit.FdcanClockSelection = RCC_FDCANCLKSOURCE_PCLK1; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief ADC1 Initialization Function + * @param None + * @retval None + */ +static void MX_ADC1_Init(void) +{ + + /* USER CODE BEGIN ADC1_Init 0 */ + + /* USER CODE END ADC1_Init 0 */ + + ADC_ChannelConfTypeDef sConfig = {0}; + + /* USER CODE BEGIN ADC1_Init 1 */ + + /* USER CODE END ADC1_Init 1 */ + /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion) + */ + hadc1.Instance = ADC1; + hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2; + hadc1.Init.Resolution = ADC_RESOLUTION_12B; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc1.Init.LowPowerAutoWait = DISABLE; + hadc1.Init.LowPowerAutoPowerOff = DISABLE; + hadc1.Init.ContinuousConvMode = DISABLE; + hadc1.Init.NbrOfConversion = 1; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; + hadc1.Init.DMAContinuousRequests = DISABLE; + hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED; + hadc1.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_1CYCLE_5; + hadc1.Init.SamplingTimeCommon2 = ADC_SAMPLETIME_1CYCLE_5; + hadc1.Init.OversamplingMode = DISABLE; + hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH; + if (HAL_ADC_Init(&hadc1) != HAL_OK) + { + Error_Handler(); + } + /** Configure Regular Channel + */ + sConfig.Channel = ADC_CHANNEL_1; + sConfig.Rank = ADC_REGULAR_RANK_1; + sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1; + if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN ADC1_Init 2 */ + + /* USER CODE END ADC1_Init 2 */ + +} + +/** + * @brief DAC1 Initialization Function + * @param None + * @retval None + */ +static void MX_DAC1_Init(void) +{ + + /* USER CODE BEGIN DAC1_Init 0 */ + + /* USER CODE END DAC1_Init 0 */ + + DAC_ChannelConfTypeDef sConfig = {0}; + + /* USER CODE BEGIN DAC1_Init 1 */ + + /* USER CODE END DAC1_Init 1 */ + /** DAC Initialization + */ + hdac1.Instance = DAC1; + if (HAL_DAC_Init(&hdac1) != HAL_OK) + { + Error_Handler(); + } + /** DAC channel OUT1 config + */ + sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE; + sConfig.DAC_Trigger = DAC_TRIGGER_NONE; + sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; + sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_DISABLE; + sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY; + if (HAL_DAC_ConfigChannel(&hdac1, &sConfig, DAC_CHANNEL_1) != HAL_OK) + { + Error_Handler(); + } + /** DAC channel OUT2 config + */ + sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_DISABLE; + if (HAL_DAC_ConfigChannel(&hdac1, &sConfig, DAC_CHANNEL_2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN DAC1_Init 2 */ + + /* USER CODE END DAC1_Init 2 */ + +} + +/** + * @brief FDCAN1 Initialization Function + * @param None + * @retval None + */ +static void MX_FDCAN1_Init(void) +{ + + /* USER CODE BEGIN FDCAN1_Init 0 */ + + /* USER CODE END FDCAN1_Init 0 */ + + /* USER CODE BEGIN FDCAN1_Init 1 */ + + /* USER CODE END FDCAN1_Init 1 */ + hfdcan1.Instance = FDCAN1; + hfdcan1.Init.ClockDivider = FDCAN_CLOCK_DIV1; + hfdcan1.Init.FrameFormat = FDCAN_FRAME_CLASSIC; + hfdcan1.Init.Mode = FDCAN_MODE_NORMAL; + hfdcan1.Init.AutoRetransmission = DISABLE; + hfdcan1.Init.TransmitPause = DISABLE; + hfdcan1.Init.ProtocolException = DISABLE; + hfdcan1.Init.NominalPrescaler = 1; + hfdcan1.Init.NominalSyncJumpWidth = 1; + hfdcan1.Init.NominalTimeSeg1 = 2; + hfdcan1.Init.NominalTimeSeg2 = 2; + hfdcan1.Init.DataPrescaler = 1; + hfdcan1.Init.DataSyncJumpWidth = 1; + hfdcan1.Init.DataTimeSeg1 = 1; + hfdcan1.Init.DataTimeSeg2 = 1; + hfdcan1.Init.StdFiltersNbr = 0; + hfdcan1.Init.ExtFiltersNbr = 0; + hfdcan1.Init.TxFifoQueueMode = FDCAN_TX_FIFO_OPERATION; + if (HAL_FDCAN_Init(&hfdcan1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN FDCAN1_Init 2 */ + + /* USER CODE END FDCAN1_Init 2 */ + +} + +/** + * @brief FDCAN2 Initialization Function + * @param None + * @retval None + */ +static void MX_FDCAN2_Init(void) +{ + + /* USER CODE BEGIN FDCAN2_Init 0 */ + + /* USER CODE END FDCAN2_Init 0 */ + + /* USER CODE BEGIN FDCAN2_Init 1 */ + + /* USER CODE END FDCAN2_Init 1 */ + hfdcan2.Instance = FDCAN2; + hfdcan2.Init.FrameFormat = FDCAN_FRAME_CLASSIC; + hfdcan2.Init.Mode = FDCAN_MODE_NORMAL; + hfdcan2.Init.AutoRetransmission = DISABLE; + hfdcan2.Init.TransmitPause = DISABLE; + hfdcan2.Init.ProtocolException = DISABLE; + hfdcan2.Init.NominalPrescaler = 1; + hfdcan2.Init.NominalSyncJumpWidth = 1; + hfdcan2.Init.NominalTimeSeg1 = 2; + hfdcan2.Init.NominalTimeSeg2 = 2; + hfdcan2.Init.DataPrescaler = 1; + hfdcan2.Init.DataSyncJumpWidth = 1; + hfdcan2.Init.DataTimeSeg1 = 1; + hfdcan2.Init.DataTimeSeg2 = 1; + hfdcan2.Init.StdFiltersNbr = 0; + hfdcan2.Init.ExtFiltersNbr = 0; + hfdcan2.Init.TxFifoQueueMode = FDCAN_TX_FIFO_OPERATION; + if (HAL_FDCAN_Init(&hfdcan2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN FDCAN2_Init 2 */ + + /* USER CODE END FDCAN2_Init 2 */ + +} + +/** + * @brief I2C1 Initialization Function + * @param None + * @retval None + */ +static void MX_I2C1_Init(void) +{ + + /* USER CODE BEGIN I2C1_Init 0 */ + + /* USER CODE END I2C1_Init 0 */ + + /* USER CODE BEGIN I2C1_Init 1 */ + + /* USER CODE END I2C1_Init 1 */ + hi2c1.Instance = I2C1; + hi2c1.Init.Timing = 0x00303D5B; + hi2c1.Init.OwnAddress1 = 0; + hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + hi2c1.Init.OwnAddress2 = 0; + hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK; + hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + if (HAL_I2C_Init(&hi2c1) != HAL_OK) + { + Error_Handler(); + } + /** Configure Analogue filter + */ + if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK) + { + Error_Handler(); + } + /** Configure Digital filter + */ + if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN I2C1_Init 2 */ + + /* USER CODE END I2C1_Init 2 */ + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief USART3 Initialization Function + * @param None + * @retval None + */ +static void MX_USART3_UART_Init(void) +{ + + /* USER CODE BEGIN USART3_Init 0 */ + + /* USER CODE END USART3_Init 0 */ + + /* USER CODE BEGIN USART3_Init 1 */ + + /* USER CODE END USART3_Init 1 */ + huart3.Instance = USART3; + huart3.Init.BaudRate = 115200; + huart3.Init.WordLength = UART_WORDLENGTH_7B; + huart3.Init.StopBits = UART_STOPBITS_1; + huart3.Init.Parity = UART_PARITY_NONE; + huart3.Init.Mode = UART_MODE_TX_RX; + huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart3.Init.OverSampling = UART_OVERSAMPLING_16; + huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart3) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart3, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart3, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart3) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART3_Init 2 */ + + /* USER CODE END USART3_Init 2 */ + +} + +/** + * @brief USB_DRD_FS Initialization Function + * @param None + * @retval None + */ +static void MX_USB_DRD_FS_PCD_Init(void) +{ + + /* USER CODE BEGIN USB_DRD_FS_Init 0 */ + + /* USER CODE END USB_DRD_FS_Init 0 */ + + /* USER CODE BEGIN USB_DRD_FS_Init 1 */ + + /* USER CODE END USB_DRD_FS_Init 1 */ + hpcd_USB_DRD_FS.Instance = USB_DRD_FS; + hpcd_USB_DRD_FS.Init.dev_endpoints = 8; + hpcd_USB_DRD_FS.Init.Host_channels = 8; + hpcd_USB_DRD_FS.Init.speed = USB_DRD_SPEED_FS; + hpcd_USB_DRD_FS.Init.phy_itface = PCD_PHY_EMBEDDED; + hpcd_USB_DRD_FS.Init.Sof_enable = DISABLE; + hpcd_USB_DRD_FS.Init.low_power_enable = DISABLE; + hpcd_USB_DRD_FS.Init.lpm_enable = DISABLE; + hpcd_USB_DRD_FS.Init.battery_charging_enable = DISABLE; + hpcd_USB_DRD_FS.Init.vbus_sensing_enable = DISABLE; + hpcd_USB_DRD_FS.Init.bulk_doublebuffer_enable = DISABLE; + hpcd_USB_DRD_FS.Init.iso_singlebuffer_enable = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_DRD_FS) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USB_DRD_FS_Init 2 */ + + /* USER CODE END USB_DRD_FS_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOB, MC_NTC_Pin|MC_DissipativeBrake_Pin|LCD_CS_OD_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(EX_RESET_OD_GPIO_Port, EX_RESET_OD_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOD, LED3_Pin|LED4_Pin|MicroSD_CS_OD_Pin|LED1_Pin + |LED2_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOE, FDCAN1_STBY_Pin|FDCAN2_STBY_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pins : MC_NTC_Pin MC_DissipativeBrake_Pin */ + GPIO_InitStruct.Pin = MC_NTC_Pin|MC_DissipativeBrake_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /*Configure GPIO pin : EX_RESET_OD_Pin */ + GPIO_InitStruct.Pin = EX_RESET_OD_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(EX_RESET_OD_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : MC_PFCsync1_Pin */ + GPIO_InitStruct.Pin = MC_PFCsync1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_LPTIM1; + HAL_GPIO_Init(MC_PFCsync1_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : JOY_UP_Pin JOY_DOWN_Pin JOY_RIGHT_Pin JOY_LEFT_Pin */ + GPIO_InitStruct.Pin = JOY_UP_Pin|JOY_DOWN_Pin|JOY_RIGHT_Pin|JOY_LEFT_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /*Configure GPIO pin : JOY_SEL_Pin */ + GPIO_InitStruct.Pin = JOY_SEL_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(JOY_SEL_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : PA7 */ + GPIO_InitStruct.Pin = GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_SPI1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pins : MC_PFCpwm_Pin MC_EnB_Pin */ + GPIO_InitStruct.Pin = MC_PFCpwm_Pin|MC_EnB_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_TIM3; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /*Configure GPIO pin : MC_EmergencySTOP_Pin */ + GPIO_InitStruct.Pin = MC_EmergencySTOP_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF2_TIM1; + HAL_GPIO_Init(MC_EmergencySTOP_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : MC_UH_Pin MC_VH_Pin MC_WH_Pin */ + GPIO_InitStruct.Pin = MC_UH_Pin|MC_VH_Pin|MC_WH_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF2_TIM1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pin : MC_EnA_Pin */ + GPIO_InitStruct.Pin = MC_EnA_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_TIM3; + HAL_GPIO_Init(MC_EnA_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : LED3_Pin LED4_Pin LED1_Pin LED2_Pin */ + GPIO_InitStruct.Pin = LED3_Pin|LED4_Pin|LED1_Pin|LED2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /*Configure GPIO pin : SDcard_detect_Pin */ + GPIO_InitStruct.Pin = SDcard_detect_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(SDcard_detect_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : MC_PFCsync2_Pin */ + GPIO_InitStruct.Pin = MC_PFCsync2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF2_TIM16; + HAL_GPIO_Init(MC_PFCsync2_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : MicroSD_CS_OD_Pin */ + GPIO_InitStruct.Pin = MicroSD_CS_OD_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(MicroSD_CS_OD_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : MC_UL_Pin MC_VL_Pin MC_WL_Pin */ + GPIO_InitStruct.Pin = MC_UL_Pin|MC_VL_Pin|MC_WL_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF2_TIM1; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /*Configure GPIO pin : PB3 */ + GPIO_InitStruct.Pin = GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_SPI1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /*Configure GPIO pins : FDCAN1_STBY_Pin FDCAN2_STBY_Pin */ + GPIO_InitStruct.Pin = FDCAN1_STBY_Pin|FDCAN2_STBY_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + /*Configure GPIO pin : LCD_CS_OD_Pin */ + GPIO_InitStruct.Pin = LCD_CS_OD_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(LCD_CS_OD_GPIO_Port, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Core/Src/stm32g0xx_hal_msp.c b/CDC/Core/Src/stm32g0xx_hal_msp.c new file mode 100644 index 0000000..20f5fb5 --- /dev/null +++ b/CDC/Core/Src/stm32g0xx_hal_msp.c @@ -0,0 +1,571 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /** Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral + */ + HAL_SYSCFG_StrobeDBattpinsConfig(SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE); + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief ADC MSP Initialization +* This function configures the hardware resources used in this example +* @param hadc: ADC handle pointer +* @retval None +*/ +void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hadc->Instance==ADC1) + { + /* USER CODE BEGIN ADC1_MspInit 0 */ + + /* USER CODE END ADC1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_ADC_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**ADC1 GPIO Configuration + PA1 ------> ADC1_IN1 + PA2 ------> ADC1_IN2 + PA3 ------> ADC1_IN3 + PA6 ------> ADC1_IN6 + PB0 ------> ADC1_IN8 + PB2 ------> ADC1_IN10 + PB10 ------> ADC1_IN11 + */ + GPIO_InitStruct.Pin = MC_BusVoltage_Pin|MC_CurrentA_Pin|GPIO_PIN_3|AUdio_IN_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = MC_EnIndex_Pin|Potentiometer_Pin|MC_CurrentC_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN ADC1_MspInit 1 */ + + /* USER CODE END ADC1_MspInit 1 */ + } + +} + +/** +* @brief ADC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hadc: ADC handle pointer +* @retval None +*/ +void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) +{ + if(hadc->Instance==ADC1) + { + /* USER CODE BEGIN ADC1_MspDeInit 0 */ + + /* USER CODE END ADC1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_ADC_CLK_DISABLE(); + + /**ADC1 GPIO Configuration + PA1 ------> ADC1_IN1 + PA2 ------> ADC1_IN2 + PA3 ------> ADC1_IN3 + PA6 ------> ADC1_IN6 + PB0 ------> ADC1_IN8 + PB2 ------> ADC1_IN10 + PB10 ------> ADC1_IN11 + */ + HAL_GPIO_DeInit(GPIOA, MC_BusVoltage_Pin|MC_CurrentA_Pin|GPIO_PIN_3|AUdio_IN_Pin); + + HAL_GPIO_DeInit(GPIOB, MC_EnIndex_Pin|Potentiometer_Pin|MC_CurrentC_Pin); + + /* USER CODE BEGIN ADC1_MspDeInit 1 */ + + /* USER CODE END ADC1_MspDeInit 1 */ + } + +} + +/** +* @brief DAC MSP Initialization +* This function configures the hardware resources used in this example +* @param hdac: DAC handle pointer +* @retval None +*/ +void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hdac->Instance==DAC1) + { + /* USER CODE BEGIN DAC1_MspInit 0 */ + + /* USER CODE END DAC1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_DAC1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**DAC1 GPIO Configuration + PA4 ------> DAC1_OUT1 + PA5 ------> DAC1_OUT2 + */ + GPIO_InitStruct.Pin = Audio_OUT_L_Pin|Audio_OUT_R_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN DAC1_MspInit 1 */ + + /* USER CODE END DAC1_MspInit 1 */ + } + +} + +/** +* @brief DAC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hdac: DAC handle pointer +* @retval None +*/ +void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac) +{ + if(hdac->Instance==DAC1) + { + /* USER CODE BEGIN DAC1_MspDeInit 0 */ + + /* USER CODE END DAC1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_DAC1_CLK_DISABLE(); + + /**DAC1 GPIO Configuration + PA4 ------> DAC1_OUT1 + PA5 ------> DAC1_OUT2 + */ + HAL_GPIO_DeInit(GPIOA, Audio_OUT_L_Pin|Audio_OUT_R_Pin); + + /* USER CODE BEGIN DAC1_MspDeInit 1 */ + + /* USER CODE END DAC1_MspDeInit 1 */ + } + +} + +static uint32_t HAL_RCC_FDCAN_CLK_ENABLED=0; + +/** +* @brief FDCAN MSP Initialization +* This function configures the hardware resources used in this example +* @param hfdcan: FDCAN handle pointer +* @retval None +*/ +void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef* hfdcan) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hfdcan->Instance==FDCAN1) + { + /* USER CODE BEGIN FDCAN1_MspInit 0 */ + + /* USER CODE END FDCAN1_MspInit 0 */ + /* Peripheral clock enable */ + HAL_RCC_FDCAN_CLK_ENABLED++; + if(HAL_RCC_FDCAN_CLK_ENABLED==1){ + __HAL_RCC_FDCAN_CLK_ENABLE(); + } + + __HAL_RCC_GPIOD_CLK_ENABLE(); + /**FDCAN1 GPIO Configuration + PD12 ------> FDCAN1_RX + PD13 ------> FDCAN1_TX + */ + GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF3_FDCAN1; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* USER CODE BEGIN FDCAN1_MspInit 1 */ + + /* USER CODE END FDCAN1_MspInit 1 */ + } + else if(hfdcan->Instance==FDCAN2) + { + /* USER CODE BEGIN FDCAN2_MspInit 0 */ + + /* USER CODE END FDCAN2_MspInit 0 */ + /* Peripheral clock enable */ + HAL_RCC_FDCAN_CLK_ENABLED++; + if(HAL_RCC_FDCAN_CLK_ENABLED==1){ + __HAL_RCC_FDCAN_CLK_ENABLE(); + } + + __HAL_RCC_GPIOD_CLK_ENABLE(); + /**FDCAN2 GPIO Configuration + PD14 ------> FDCAN2_RX + PD15 ------> FDCAN2_TX + */ + GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_15; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF3_FDCAN2; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* USER CODE BEGIN FDCAN2_MspInit 1 */ + + /* USER CODE END FDCAN2_MspInit 1 */ + } + +} + +/** +* @brief FDCAN MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hfdcan: FDCAN handle pointer +* @retval None +*/ +void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef* hfdcan) +{ + if(hfdcan->Instance==FDCAN1) + { + /* USER CODE BEGIN FDCAN1_MspDeInit 0 */ + + /* USER CODE END FDCAN1_MspDeInit 0 */ + /* Peripheral clock disable */ + HAL_RCC_FDCAN_CLK_ENABLED--; + if(HAL_RCC_FDCAN_CLK_ENABLED==0){ + __HAL_RCC_FDCAN_CLK_DISABLE(); + } + + /**FDCAN1 GPIO Configuration + PD12 ------> FDCAN1_RX + PD13 ------> FDCAN1_TX + */ + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_12|GPIO_PIN_13); + + /* USER CODE BEGIN FDCAN1_MspDeInit 1 */ + + /* USER CODE END FDCAN1_MspDeInit 1 */ + } + else if(hfdcan->Instance==FDCAN2) + { + /* USER CODE BEGIN FDCAN2_MspDeInit 0 */ + + /* USER CODE END FDCAN2_MspDeInit 0 */ + /* Peripheral clock disable */ + HAL_RCC_FDCAN_CLK_ENABLED--; + if(HAL_RCC_FDCAN_CLK_ENABLED==0){ + __HAL_RCC_FDCAN_CLK_DISABLE(); + } + + /**FDCAN2 GPIO Configuration + PD14 ------> FDCAN2_RX + PD15 ------> FDCAN2_TX + */ + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_14|GPIO_PIN_15); + + /* USER CODE BEGIN FDCAN2_MspDeInit 1 */ + + /* USER CODE END FDCAN2_MspDeInit 1 */ + } + +} + +/** +* @brief I2C MSP Initialization +* This function configures the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ +void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspInit 0 */ + + /* USER CODE END I2C1_MspInit 0 */ + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**I2C1 GPIO Configuration + PB6 ------> I2C1_SCL + PB7 ------> I2C1_SDA + */ + GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF6_I2C1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __HAL_RCC_I2C1_CLK_ENABLE(); + /* USER CODE BEGIN I2C1_MspInit 1 */ + + /* USER CODE END I2C1_MspInit 1 */ + } + +} + +/** +* @brief I2C MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ +void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) +{ + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspDeInit 0 */ + + /* USER CODE END I2C1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_I2C1_CLK_DISABLE(); + + /**I2C1 GPIO Configuration + PB6 ------> I2C1_SCL + PB7 ------> I2C1_SDA + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6); + + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7); + + /* USER CODE BEGIN I2C1_MspDeInit 1 */ + + /* USER CODE END I2C1_MspDeInit 1 */ + } + +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + /**USART1 GPIO Configuration + PC4 ------> USART1_TX + PC5 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_USART1; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + else if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspInit 0 */ + + /* USER CODE END USART3_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART3_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + /**USART3 GPIO Configuration + PC10 ------> USART3_TX + PC11 ------> USART3_RX + */ + GPIO_InitStruct.Pin = VCP_TX_Pin|VCP_RX_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_USART3; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* USER CODE BEGIN USART3_MspInit 1 */ + + /* USER CODE END USART3_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PC4 ------> USART1_TX + PC5 ------> USART1_RX + */ + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5); + + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + else if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspDeInit 0 */ + + /* USER CODE END USART3_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART3_CLK_DISABLE(); + + /**USART3 GPIO Configuration + PC10 ------> USART3_TX + PC11 ------> USART3_RX + */ + HAL_GPIO_DeInit(GPIOC, VCP_TX_Pin|VCP_RX_Pin); + + /* USER CODE BEGIN USART3_MspDeInit 1 */ + + /* USER CODE END USART3_MspDeInit 1 */ + } + +} + +/** +* @brief PCD MSP Initialization +* This function configures the hardware resources used in this example +* @param hpcd: PCD handle pointer +* @retval None +*/ +void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd) +{ + if(hpcd->Instance==USB_DRD_FS) + { + /* USER CODE BEGIN USB_DRD_FS_MspInit 0 */ + + /* USER CODE END USB_DRD_FS_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USB_CLK_ENABLE(); + /* USER CODE BEGIN USB_DRD_FS_MspInit 1 */ + + /* USER CODE END USB_DRD_FS_MspInit 1 */ + } + +} + +/** +* @brief PCD MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hpcd: PCD handle pointer +* @retval None +*/ +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd) +{ + if(hpcd->Instance==USB_DRD_FS) + { + /* USER CODE BEGIN USB_DRD_FS_MspDeInit 0 */ + + /* USER CODE END USB_DRD_FS_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_CLK_DISABLE(); + /* USER CODE BEGIN USB_DRD_FS_MspDeInit 1 */ + + /* USER CODE END USB_DRD_FS_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Core/Src/stm32g0xx_it.c b/CDC/Core/Src/stm32g0xx_it.c new file mode 100644 index 0000000..a646cfe --- /dev/null +++ b/CDC/Core/Src/stm32g0xx_it.c @@ -0,0 +1,147 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32g0xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M0+ Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVC_IRQn 0 */ + + /* USER CODE END SVC_IRQn 0 */ + /* USER CODE BEGIN SVC_IRQn 1 */ + + /* USER CODE END SVC_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32G0xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32g0xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Core/Src/syscalls.c b/CDC/Core/Src/syscalls.c new file mode 100644 index 0000000..4ec9584 --- /dev/null +++ b/CDC/Core/Src/syscalls.c @@ -0,0 +1,159 @@ +/** + ****************************************************************************** + * @file syscalls.c + * @author Auto-generated by STM32CubeIDE + * @brief STM32CubeIDE Minimal System calls file + * + * For more information about which c-functions + * need which of these lowlevel functions + * please consult the Newlib libc-manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include + + +/* Variables */ +//#undef errno +extern int errno; +extern int __io_putchar(int ch) __attribute__((weak)); +extern int __io_getchar(void) __attribute__((weak)); + +register char * stack_ptr asm("sp"); + +char *__env[1] = { 0 }; +char **environ = __env; + + +/* Functions */ +void initialise_monitor_handles() +{ +} + +int _getpid(void) +{ + return 1; +} + +int _kill(int pid, int sig) +{ + errno = EINVAL; + return -1; +} + +void _exit (int status) +{ + _kill(status, -1); + while (1) {} /* Make sure we hang here */ +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + *ptr++ = __io_getchar(); + } + +return len; +} + +__attribute__((weak)) int _write(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + __io_putchar(*ptr++); + } + return len; +} + +int _close(int file) +{ + return -1; +} + + +int _fstat(int file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _isatty(int file) +{ + return 1; +} + +int _lseek(int file, int ptr, int dir) +{ + return 0; +} + +int _open(char *path, int flags, ...) +{ + /* Pretend like we always fail */ + return -1; +} + +int _wait(int *status) +{ + errno = ECHILD; + return -1; +} + +int _unlink(char *name) +{ + errno = ENOENT; + return -1; +} + +int _times(struct tms *buf) +{ + return -1; +} + +int _stat(char *file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _link(char *old, char *new) +{ + errno = EMLINK; + return -1; +} + +int _fork(void) +{ + errno = EAGAIN; + return -1; +} + +int _execve(char *name, char **argv, char **env) +{ + errno = ENOMEM; + return -1; +} diff --git a/CDC/Core/Src/sysmem.c b/CDC/Core/Src/sysmem.c new file mode 100644 index 0000000..d7cc52c --- /dev/null +++ b/CDC/Core/Src/sysmem.c @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file sysmem.c + * @author Generated by STM32CubeIDE + * @brief STM32CubeIDE System Memory calls file + * + * For more information about which C functions + * need which of these lowlevel functions + * please consult the newlib libc manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include + +/** + * Pointer to the current high watermark of the heap usage + */ +static uint8_t *__sbrk_heap_end = NULL; + +/** + * @brief _sbrk() allocates memory to the newlib heap and is used by malloc + * and others from the C library + * + * @verbatim + * ############################################################################ + * # .data # .bss # newlib heap # MSP stack # + * # # # # Reserved by _Min_Stack_Size # + * ############################################################################ + * ^-- RAM start ^-- _end _estack, RAM end --^ + * @endverbatim + * + * This implementation starts allocating at the '_end' linker symbol + * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack + * The implementation considers '_estack' linker symbol to be RAM end + * NOTE: If the MSP stack, at any point during execution, grows larger than the + * reserved size, please increase the '_Min_Stack_Size'. + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + const uint8_t *max_heap = (uint8_t *)stack_limit; + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + { + __sbrk_heap_end = &_end; + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + { + errno = ENOMEM; + return (void *)-1; + } + + prev_heap_end = __sbrk_heap_end; + __sbrk_heap_end += incr; + + return (void *)prev_heap_end; +} diff --git a/CDC/Core/Src/system_stm32g0xx.c b/CDC/Core/Src/system_stm32g0xx.c new file mode 100644 index 0000000..95dd026 --- /dev/null +++ b/CDC/Core/Src/system_stm32g0xx.c @@ -0,0 +1,290 @@ +/** + ****************************************************************************** + * @file system_stm32g0xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32g0xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the HSI (8 MHz then 16 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32g0xx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | HSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB Prescaler | 1 + *----------------------------------------------------------------------------- + * HSI Division factor | 1 + *----------------------------------------------------------------------------- + * PLL_M | 1 + *----------------------------------------------------------------------------- + * PLL_N | 8 + *----------------------------------------------------------------------------- + * PLL_P | 7 + *----------------------------------------------------------------------------- + * PLL_Q | 2 + *----------------------------------------------------------------------------- + * PLL_R | 2 + *----------------------------------------------------------------------------- + * Require 48MHz for RNG | Disabled + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32g0xx_system + * @{ + */ + +/** @addtogroup STM32G0xx_System_Private_Includes + * @{ + */ + +#include "stm32g0xx.h" + +#if !defined (HSE_VALUE) +#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/ +#endif /* LSI_VALUE */ + +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 16000000UL; + + const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL}; + const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL}; + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE + * + * - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (**) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp; + uint32_t pllvco; + uint32_t pllr; + uint32_t pllsource; + uint32_t pllm; + uint32_t hsidiv; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_0: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + + case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0): /* LSI used as system clock */ + SystemCoreClock = LSI_VALUE; + break; + + case RCC_CFGR_SWS_2: /* LSE used as system clock */ + SystemCoreClock = LSE_VALUE; + break; + + case RCC_CFGR_SWS_1: /* PLL used as system clock */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL; + + if(pllsource == 0x03UL) /* HSE used as PLL clock source */ + { + pllvco = (HSE_VALUE / pllm); + } + else /* HSI used as PLL clock source */ + { + pllvco = (HSI_VALUE / pllm); + } + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL); + + SystemCoreClock = pllvco/pllr; + break; + + case 0x00000000U: /* HSI used as system clock */ + default: /* HSI used as system clock */ + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos)); + SystemCoreClock = (HSI_VALUE/hsidiv); + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Core/Startup/startup_stm32g0c1vetx.s b/CDC/Core/Startup/startup_stm32g0c1vetx.s new file mode 100644 index 0000000..a956aae --- /dev/null +++ b/CDC/Core/Startup/startup_stm32g0c1vetx.s @@ -0,0 +1,302 @@ +/** + ****************************************************************************** + * @file startup_stm32g0c1xx.s + * @author MCD Application Team + * @brief STM32G0c1xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0+ processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * Copyright (c) 2020 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +.syntax unified +.cpu cortex-m0plus +.fpu softvfp +.thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Call the clock system initialization function.*/ + bl SystemInit + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler + +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_VDDIO2_IRQHandler /* PVD through EXTI Line detect */ + .word RTC_TAMP_IRQHandler /* RTC through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_CRS_IRQHandler /* RCC & CRS */ + .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ + .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ + .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ + .word USB_UCPD1_2_IRQHandler /* USB, UCPD1, UCPD2 */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ + .word DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler /* DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5, DMAMUX1 overrun */ + .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ + .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_TIM4_IRQHandler /* TIM3, TIM4 */ + .word TIM6_DAC_LPTIM1_IRQHandler /* TIM6, DAC and LPTIM1 */ + .word TIM7_LPTIM2_IRQHandler /* TIM7 and LPTIM2 */ + .word TIM14_IRQHandler /* TIM14 */ + .word TIM15_IRQHandler /* TIM15 */ + .word TIM16_FDCAN_IT0_IRQHandler /* TIM16 & FDCAN1_IT0 & FDCAN2_IT0 */ + .word TIM17_FDCAN_IT1_IRQHandler /* TIM17 & FDCAN1_IT1 & FDCAN2_IT1 */ + .word I2C1_IRQHandler /* I2C1 */ + .word I2C2_3_IRQHandler /* I2C2, I2C3 */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_3_IRQHandler /* SPI2, SPI3 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_LPUART2_IRQHandler /* USART2 & LPUART2 */ + .word USART3_4_5_6_LPUART1_IRQHandler /* USART3, USART4, USART5, USART6, LPUART1 */ + .word CEC_IRQHandler /* CEC */ + .word AES_RNG_IRQHandler /* AES and RNG */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_TAMP_IRQHandler + .thumb_set RTC_TAMP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak USB_UCPD1_2_IRQHandler + .thumb_set USB_UCPD1_2_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler + .thumb_set DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_TIM4_IRQHandler + .thumb_set TIM3_TIM4_IRQHandler,Default_Handler + + .weak TIM6_DAC_LPTIM1_IRQHandler + .thumb_set TIM6_DAC_LPTIM1_IRQHandler,Default_Handler + + .weak TIM7_LPTIM2_IRQHandler + .thumb_set TIM7_LPTIM2_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_FDCAN_IT0_IRQHandler + .thumb_set TIM16_FDCAN_IT0_IRQHandler,Default_Handler + + .weak TIM17_FDCAN_IT1_IRQHandler + .thumb_set TIM17_FDCAN_IT1_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_3_IRQHandler + .thumb_set I2C2_3_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_3_IRQHandler + .thumb_set SPI2_3_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_LPUART2_IRQHandler + .thumb_set USART2_LPUART2_IRQHandler,Default_Handler + + .weak USART3_4_5_6_LPUART1_IRQHandler + .thumb_set USART3_4_5_6_LPUART1_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + + .weak AES_RNG_IRQHandler + .thumb_set AES_RNG_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/CDC/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0c1xx.h b/CDC/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0c1xx.h new file mode 100644 index 0000000..861faeb --- /dev/null +++ b/CDC/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0c1xx.h @@ -0,0 +1,11477 @@ +/** + ****************************************************************************** + * @file stm32g0c1xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32g0c1xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g0c1xx + * @{ + */ + +#ifndef STM32G0C1xx_H +#define STM32G0C1xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g0c1xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD through EXTI line 16, PVM (monit. VDDIO2) through EXTI line 34*/ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + USB_UCPD1_2_IRQn = 8, /*!< USB, UCPD1 and UCPD2 global Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1,COMP2, COMP3 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_TIM4_IRQn = 16, /*!< TIM3, TIM4 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_FDCAN_IT0_IRQn = 21, /*!< TIM16, FDCAN1_IT0 and FDCAN2_IT0 Interrupt */ + TIM17_FDCAN_IT1_IRQn = 22, /*!< TIM17, FDCAN1_IT1 and FDCAN2_IT1 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_3_IRQn = 24, /*!< I2C2, I2C3 Interrupt (combined with EXTI 24 and EXTI 22) */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_3_IRQn = 26, /*!< SPI2/I2S2, SPI3/I2S3 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_LPUART2_IRQn = 28, /*!< USART2 + LPUART2 Interrupt */ + USART3_4_5_6_LPUART1_IRQn = 29, /*!< USART3, USART4, USART5, USART6, LPUART1 globlal Interrupts (combined with EXTI 28) */ + CEC_IRQn = 30, /*!< CEC Interrupt(combined with EXTI 27) */ + AES_RNG_IRQn = 31, /*!< AES & RNG Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ + +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ +} FDCAN_Config_TypeDef; + +/** + * @brief HDMI-CEC + */ +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising Trigger Selection Register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling Trigger Selection Register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software Interrupt event Register 2, Address offset: 0x28 */ + __IO uint32_t RPR2; /*!< EXTI Rising Pending Register 2, Address offset: 0x2C */ + __IO uint32_t FPR2; /*!< EXTI Falling Pending Register 2, Address offset: 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ + uint32_t RESERVED5[2]; /*!< Reserved 5, 0x88 -- 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt Mask Register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event Mask Register 2, Address offset: 0x94 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC bank 1 register, Address offset: 0x18 */ + __IO uint32_t ECC2R; /*!< FLASH ECC bank 2 register, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED5[2]; /*!< Reserved5, Address offset: 0x3C--0x40 */ + __IO uint32_t PCROP2ASR; /*!< FLASH Bank2 PCROP area A Start address register, Address offset: 0x44 */ + __IO uint32_t PCROP2AER; /*!< FLASH Bank2 PCROP area A End address register, Address offset: 0x48 */ + __IO uint32_t WRP2AR; /*!< FLASH Bank2 WRP area A address register, Address offset: 0x4C */ + __IO uint32_t WRP2BR; /*!< FLASH Bank2 WRP area B address register, Address offset: 0x50 */ + __IO uint32_t PCROP2BSR; /*!< FLASH Bank2 PCROP area B Start address register, Address offset: 0x54 */ + __IO uint32_t PCROP2BER; /*!< FLASH Bank2 PCROP area B End address register, Address offset: 0x58 */ + uint32_t RESERVED7[9]; /*!< Reserved7, Address offset: 0x5C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t CRRCR; /*!< RCC Clock Configuration Register, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t CCIPR2; /*!< RCC Peripherals Independent Clocks Configuration Register2, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Dual Role Device + */ + +typedef struct +{ + __IO uint32_t CHEP0R; /*!< USB Channel/Endpoint 0 register, Address offset: 0x00 */ + __IO uint32_t CHEP1R; /*!< USB Channel/Endpoint 1 register, Address offset: 0x04 */ + __IO uint32_t CHEP2R; /*!< USB Channel/Endpoint 2 register, Address offset: 0x08 */ + __IO uint32_t CHEP3R; /*!< USB Channel/Endpoint 3 register, Address offset: 0x0C */ + __IO uint32_t CHEP4R; /*!< USB Channel/Endpoint 4 register, Address offset: 0x10 */ + __IO uint32_t CHEP5R; /*!< USB Channel/Endpoint 5 register, Address offset: 0x14 */ + __IO uint32_t CHEP6R; /*!< USB Channel/Endpoint 6 register, Address offset: 0x18 */ + __IO uint32_t CHEP7R; /*!< USB Channel/Endpoint 7 register, Address offset: 0x1C */ + __IO uint32_t RESERVED0[8]; /*!< Reserved, */ + __IO uint32_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint32_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint32_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint32_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint32_t RESERVED1; /*!< Reserved */ + __IO uint32_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint32_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ +} USB_DRD_TypeDef; + +/** + * @brief Universal Serial Bus PacketMemoryArea Buffer Descriptor Table + */ +typedef struct +{ + __IO uint32_t TXBD; /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_TAMP3E_Pos (2U) +#define TAMP_CR1_TAMP3E_Msk (0x1UL << TAMP_CR1_TAMP3E_Pos) /*!< 0x00000004 */ +#define TAMP_CR1_TAMP3E TAMP_CR1_TAMP3E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP3NOERASE_Pos (2U) +#define TAMP_CR2_TAMP3NOERASE_Msk (0x1UL << TAMP_CR2_TAMP3NOERASE_Pos) /*!< 0x00000004 */ +#define TAMP_CR2_TAMP3NOERASE TAMP_CR2_TAMP3NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP3MSK_Pos (18U) +#define TAMP_CR2_TAMP3MSK_Msk (0x1UL << TAMP_CR2_TAMP3MSK_Pos) /*!< 0x00040000 */ +#define TAMP_CR2_TAMP3MSK TAMP_CR2_TAMP3MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk +#define TAMP_CR2_TAMP3TRG_Pos (26U) +#define TAMP_CR2_TAMP3TRG_Msk (0x1UL << TAMP_CR2_TAMP3TRG_Pos) /*!< 0x04000000 */ +#define TAMP_CR2_TAMP3TRG TAMP_CR2_TAMP3TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_TAMP3IE_Pos (2U) +#define TAMP_IER_TAMP3IE_Msk (0x1UL << TAMP_IER_TAMP3IE_Pos) /*!< 0x00000004 */ +#define TAMP_IER_TAMP3IE TAMP_IER_TAMP3IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_TAMP3F_Pos (2U) +#define TAMP_SR_TAMP3F_Msk (0x1UL << TAMP_SR_TAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SR_TAMP3F TAMP_SR_TAMP3F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_TAMP3MF_Pos (2U) +#define TAMP_MISR_TAMP3MF_Msk (0x1UL << TAMP_MISR_TAMP3MF_Pos) /*!< 0x00000004 */ +#define TAMP_MISR_TAMP3MF TAMP_MISR_TAMP3MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CTAMP3F_Pos (2U) +#define TAMP_SCR_CTAMP3F_Msk (0x1UL << TAMP_SCR_CTAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SCR_CTAMP3F TAMP_SCR_CTAMP3F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE1_SR_PVMOUT_Pos (1U) +#define SYSCFG_ITLINE1_SR_PVMOUT_Msk (0x1UL << SYSCFG_ITLINE1_SR_PVMOUT_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE1_SR_PVMOUT SYSCFG_ITLINE1_SR_PVMOUT_Msk /*!< VDDUSB Power voltage monitor -> exti[34] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE4_SR_CRS_Pos (1U) +#define SYSCFG_ITLINE4_SR_CRS_Msk (0x1UL << SYSCFG_ITLINE4_SR_CRS_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE4_SR_CRS SYSCFG_ITLINE4_SR_CRS_Msk /*!< CRS interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE8_SR_UCPD1_Pos (0U) +#define SYSCFG_ITLINE8_SR_UCPD1_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE8_SR_UCPD1 SYSCFG_ITLINE8_SR_UCPD1_Msk /*!< UCPD1 -> exti[32] Interrupt */ +#define SYSCFG_ITLINE8_SR_UCPD2_Pos (1U) +#define SYSCFG_ITLINE8_SR_UCPD2_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD2_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE8_SR_UCPD2 SYSCFG_ITLINE8_SR_UCPD2_Msk /*!< UCPD2 -> exti[33] Interrupt */ +#define SYSCFG_ITLINE8_SR_USB_Pos (2U) +#define SYSCFG_ITLINE8_SR_USB_Msk (0x1UL << SYSCFG_ITLINE8_SR_USB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE8_SR_USB SYSCFG_ITLINE8_SR_USB_Msk /*!< USB Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Pos (5U) +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH1_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1 SYSCFG_ITLINE11_SR_DMA2_CH1_Msk /*!< DMA2 Channel 1 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Pos (6U) +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH2_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2 SYSCFG_ITLINE11_SR_DMA2_CH2_Msk /*!< DMA2 Channel 2 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Pos (7U) +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH3_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3 SYSCFG_ITLINE11_SR_DMA2_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Pos (8U) +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH4_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4 SYSCFG_ITLINE11_SR_DMA2_CH4_Msk /*!< DMA2 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Pos (9U) +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH5_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5 SYSCFG_ITLINE11_SR_DMA2_CH5_Msk /*!< DMA2 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE12_SR_COMP3_Pos (3U) +#define SYSCFG_ITLINE12_SR_COMP3_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP3_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE12_SR_COMP3 SYSCFG_ITLINE12_SR_COMP3_Msk /*!< COMP3 Interrupt -> exti[20] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Pos (1U) +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB SYSCFG_ITLINE16_SR_TIM4_GLB_Msk /*!< TIM4 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos (1U) +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0 SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk /*!< FDCAN1 IT0 Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos (2U) +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0 SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk /*!< FDCAN2 IT0 Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos (1U) +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1 SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk /*!< FDCAN1 IT1 Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos (2U) +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1 SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk /*!< FDCAN2 IT1 Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Pos (1U) +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C3_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE24_SR_I2C3_GLB SYSCFG_ITLINE24_SR_I2C3_GLB_Msk /*!< I2C3 GLB Interrupt -> exti[24]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI3_Pos (1U) +#define SYSCFG_ITLINE26_SR_SPI3_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE26_SR_SPI3 SYSCFG_ITLINE26_SR_SPI3_Msk /*!< SPI3 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos (1U) +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk /*!< LPUART2 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE29_SR_USART5_GLB_Pos (3U) +#define SYSCFG_ITLINE29_SR_USART5_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART5_GLB_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE29_SR_USART5_GLB SYSCFG_ITLINE29_SR_USART5_GLB_Msk /*!< USART5 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART6_GLB_Pos (4U) +#define SYSCFG_ITLINE29_SR_USART6_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART6_GLB_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE29_SR_USART6_GLB SYSCFG_ITLINE29_SR_USART6_GLB_Msk /*!< USART6 GLB Interrupt */ +#define SYSCFG_ITLINE30_SR_CEC_Pos (0U) +#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1UL << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt-> exti[27] */ +#define SYSCFG_ITLINE31_SR_RNG_Pos (0U) +#define SYSCFG_ITLINE31_SR_RNG_Msk (0x1UL << SYSCFG_ITLINE31_SR_RNG_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE31_SR_RNG SYSCFG_ITLINE31_SR_RNG_Msk /*!< RNG Interrupt */ +#define SYSCFG_ITLINE31_SR_AES_Pos (1U) +#define SYSCFG_ITLINE31_SR_AES_Msk (0x1UL << SYSCFG_ITLINE31_SR_AES_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE31_SR_AES SYSCFG_ITLINE31_SR_AES_Msk /*!< AES Interrupt */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32g0xx + * @{ + */ + +#ifndef STM32G0xx_H +#define STM32G0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32G0) +#define STM32G0 +#endif /* STM32G0 */ + +/* Uncomment the line below according to the target STM32G0 device used in your + application + */ + +#if !defined (STM32G071xx) && !defined (STM32G081xx) && !defined (STM32G070xx) \ + && !defined (STM32G030xx) && !defined (STM32G031xx) && !defined (STM32G041xx) \ + && !defined (STM32G0B0xx) && !defined (STM32G0B1xx) && !defined (STM32G0C1xx) \ + && !defined (STM32G050xx) && !defined (STM32G051xx) && !defined (STM32G061xx) + /* #define STM32G0B0xx */ /*!< STM32G0B0xx Devices */ + /* #define STM32G0B1xx */ /*!< STM32G0B1xx Devices */ + /* #define STM32G0C1xx */ /*!< STM32G0C1xx Devices */ + /* #define STM32G070xx */ /*!< STM32G070xx Devices */ + /* #define STM32G071xx */ /*!< STM32G071xx Devices */ + /* #define STM32G081xx */ /*!< STM32G081xx Devices */ + /* #define STM32G050xx */ /*!< STM32G050xx Devices */ + /* #define STM32G051xx */ /*!< STM32G051xx Devices */ + /* #define STM32G061xx */ /*!< STM32G061xx Devices */ + /* #define STM32G030xx */ /*!< STM32G030xx Devices */ + /* #define STM32G031xx */ /*!< STM32G031xx Devices */ + /* #define STM32G041xx */ /*!< STM32G041xx Devices */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number $VERSION$ + */ +#define __STM32G0_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32G0_CMSIS_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */ +#define __STM32G0_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32G0_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32G0_CMSIS_VERSION ((__STM32G0_CMSIS_VERSION_MAIN << 24)\ + |(__STM32G0_CMSIS_VERSION_SUB1 << 16)\ + |(__STM32G0_CMSIS_VERSION_SUB2 << 8 )\ + |(__STM32G0_CMSIS_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32G0B1xx) + #include "stm32g0b1xx.h" +#elif defined(STM32G0C1xx) + #include "stm32g0c1xx.h" +#elif defined(STM32G0B0xx) + #include "stm32g0b0xx.h" +#elif defined(STM32G071xx) + #include "stm32g071xx.h" +#elif defined(STM32G081xx) + #include "stm32g081xx.h" +#elif defined(STM32G070xx) + #include "stm32g070xx.h" +#elif defined(STM32G031xx) + #include "stm32g031xx.h" +#elif defined(STM32G041xx) + #include "stm32g041xx.h" +#elif defined(STM32G030xx) + #include "stm32g030xx.h" +#elif defined(STM32G051xx) + #include "stm32g051xx.h" +#elif defined(STM32G061xx) + #include "stm32g061xx.h" +#elif defined(STM32G050xx) + #include "stm32g050xx.h" +#else + #error "Please select first the target STM32G0xx device used in your application (in stm32g0xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + SUCCESS = 0, + ERROR = !SUCCESS +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/*#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))*/ +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32g0xx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32G0xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h b/CDC/Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h new file mode 100644 index 0000000..4049967 --- /dev/null +++ b/CDC/Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h @@ -0,0 +1,106 @@ +/** + ****************************************************************************** + * @file system_stm32g0xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device System Source File for STM32G0xx devices. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32g0xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef SYSTEM_STM32G0XX_H +#define SYSTEM_STM32G0XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32G0xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32G0xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +extern const uint32_t AHBPrescTable[16]; /*!< AHB prescalers table values */ +extern const uint32_t APBPrescTable[8]; /*!< APB prescalers table values */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*SYSTEM_STM32G0XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/CMSIS/Include/cmsis_armcc.h b/CDC/Drivers/CMSIS/Include/cmsis_armcc.h new file mode 100644 index 0000000..da9d654 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/cmsis_armcc.h @@ -0,0 +1,894 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.1.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + +/* CMSIS compiler control DSP macros */ +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __ARM_FEATURE_DSP 1 +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __memory_changed() +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() do {\ + __schedule_barrier();\ + __isb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() do {\ + __schedule_barrier();\ + __dsb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() do {\ + __schedule_barrier();\ + __dmb(0xF);\ + __schedule_barrier();\ + } while (0U) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/CDC/Drivers/CMSIS/Include/cmsis_armclang.h b/CDC/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..478f75b --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1444 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/CDC/Drivers/CMSIS/Include/cmsis_armclang_ltm.h b/CDC/Drivers/CMSIS/Include/cmsis_armclang_ltm.h new file mode 100644 index 0000000..1b5a965 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/cmsis_armclang_ltm.h @@ -0,0 +1,1891 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/CDC/Drivers/CMSIS/Include/cmsis_compiler.h b/CDC/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..21a2c71 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/CDC/Drivers/CMSIS/Include/cmsis_gcc.h b/CDC/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..1e08e7e --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2168 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section(".vectors"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/CDC/Drivers/CMSIS/Include/cmsis_iccarm.h b/CDC/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..7af7562 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,964 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.1.0 + * @date 08. May 2019 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2019 IAR Systems +// Copyright (c) 2017-2019 Arm Limited. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/CDC/Drivers/CMSIS/Include/cmsis_version.h b/CDC/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..3174cf6 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.3 + * @date 24. June 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/CDC/Drivers/CMSIS/Include/core_armv81mml.h b/CDC/Drivers/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000..8cee930 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,2968 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 15. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +#define __ARM_ARCH_8M_MAIN__ 1 // patching for now +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (0x1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_armv8mbl.h b/CDC/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..266f180 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1921 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_armv8mml.h b/CDC/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..ba5d83f --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2835 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. September 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm0.h b/CDC/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..70e4505 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,952 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = 0x0U; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = 0x0U; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm0plus.h b/CDC/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..fe7b424 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1085 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm1.h b/CDC/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..44c2a49 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,979 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.1 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm23.h b/CDC/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..49f4a5b --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1996 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm3.h b/CDC/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..1f69e8b --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1937 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm33.h b/CDC/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..2f1d98e --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm35p.h b/CDC/Drivers/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000..7d34367 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm35p.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm4.h b/CDC/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..90c2a72 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2124 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_cm7.h b/CDC/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..3da3c43 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2725 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.1.1 + * @date 28. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_sc000.h b/CDC/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..f315013 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1025 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/core_sc300.h b/CDC/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..ad031f2 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1912 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 31. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/CDC/Drivers/CMSIS/Include/mpu_armv7.h b/CDC/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..337eb65 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,272 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/CDC/Drivers/CMSIS/Include/mpu_armv8.h b/CDC/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..2fe28b6 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,346 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/CDC/Drivers/CMSIS/Include/tz_context.h b/CDC/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..d4c1474 --- /dev/null +++ b/CDC/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..8d44e18 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3783 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ + +#if defined(STM32L1) + #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the events that can be selected to configure the + * set/reset crossbar of a timer output + */ +#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) +#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) +#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) +#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) +#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) +#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) +#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) +#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) +#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) + +#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) +#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) +#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) +#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) +#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) +#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) +#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) +#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) +#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) + +/** @brief Constants defining the event filtering applied to external events + * by a timer + */ +#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) + #define I2S_IT_TXE I2S_IT_TXP + #define I2S_IT_RXNE I2S_IT_RXP + + #define I2S_FLAG_TXE I2S_FLAG_TXP + #define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) + #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT + +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + + #define SPI_FLAG_TXE SPI_FLAG_TXP + #define SPI_FLAG_RXNE SPI_FLAG_RXP + + #define SPI_IT_TXE SPI_IT_TXP + #define SPI_IT_RXNE SPI_IT_RXP + + #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET + #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET + #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET + #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + + /** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ + /** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + + /** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) + #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h new file mode 100644 index 0000000..7e896a2 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h @@ -0,0 +1,839 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_H +#define STM32G0xx_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_conf.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH 0x00000000U /*!< Main Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x0000 0000 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Break Break + * @{ + */ +#define SYSCFG_BREAK_SP SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM Parity error signal with Break Input of TIM1/15/16/17 */ +#if defined(SYSCFG_CFGR2_PVDL) +#define SYSCFG_BREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#endif /* SYSCFG_CFGR2_PVDL */ +#define SYSCFG_BREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM0+ with Break Input of TIM1/15/16/17 */ +#define SYSCFG_BREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC of CortexM0+ with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @defgroup SYSCFG_ClampingDiode Clamping Diode + * @{ + */ +#define SYSCFG_CDEN_PA1 SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping Diode on PA1 */ +#define SYSCFG_CDEN_PA3 SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping Diode on PA3 */ +#define SYSCFG_CDEN_PA5 SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping Diode on PA5 */ +#define SYSCFG_CDEN_PA6 SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping Diode on PA6 */ +#define SYSCFG_CDEN_PA13 SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping Diode on PA13 */ +#define SYSCFG_CDEN_PB0 SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping Diode on PB0 */ +#define SYSCFG_CDEN_PB1 SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping Diode on PB1 */ +#define SYSCFG_CDEN_PB2 SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping Diode on PB2 */ + +/** + * @} + */ +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @defgroup HAL_Pin_remapping Pin remapping + * @{ + */ +/* Only available on cut2.0 */ +#define SYSCFG_REMAP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves digitally as PA9 GPIO pin */ +#define SYSCFG_REMAP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves digitally as PA10 GPIO pin */ +/** + * @} + */ + +/** @defgroup HAL_IR_ENV_SEL IR Modulation Envelope signal selection + * @{ + */ +#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IR Modulation envelope source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IR Modulation envelope source */ +#if defined(USART4) +#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IR Modulation envelope source */ +#else +#define HAL_SYSCFG_IRDA_ENV_SEL_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IR Modulation envelope source */ +#endif /* USART4 */ + +/** + * @} + */ + +/** @defgroup HAL_IR_POL_SEL IR output polarity selection + * @{ + */ +#define HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED 0x00000000U /*!< 00: IR output polarity not inverted */ +#define HAL_SYSCFG_IRDA_POLARITY_INVERTED SYSCFG_CFGR1_IR_POL /*!< 01: IR output polarity inverted */ + +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale + * @{ + */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0: VREF_OUT1 around 2.048 V. + This requires VDDA equal to or higher than 2.4 V. */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1: VREF_OUT1 around 2.5 V. + This requires VDDA equal to or higher than 2.8 V. */ + +/** + * @} + */ + +/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance + * @{ + */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0x00000000U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast mode Plus on GPIO + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast mode Plus on PB9 */ +#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast mode Plus on PA9 */ +#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast mode Plus on PA10 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FastModePlus_I2Cx Fast mode Plus driving capability activation for I2Cx + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast mode Plus on I2C1 */ +#define SYSCFG_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast mode Plus on I2C2 */ +#if defined (I2C3) +#define SYSCFG_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast mode Plus on I2C3 */ +#endif /* I2C3 */ + +/** + * @} + */ +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +/** @defgroup SYSCFG_UCPDx_STROBE SYSCFG Dead Battery feature configuration + * @{ + */ +#define SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 Dead battery sw configuration */ +#define SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 Dead battery sw configuration */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_UCPD1_STROBE) || SYSCFG_CFGR1_UCPD2_STROBE */ + +/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper + * @brief ISR Wrapper + * @{ + */ +#define HAL_SYSCFG_ITLINE0 0x00000000U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE1 0x00000001U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE2 0x00000002U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE3 0x00000003U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE4 0x00000004U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE5 0x00000005U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE6 0x00000006U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE7 0x00000007U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE8 0x00000008U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE9 0x00000009U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE10 0x0000000AU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE11 0x0000000BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE12 0x0000000CU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE13 0x0000000DU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE14 0x0000000EU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE15 0x0000000FU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE16 0x00000010U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE17 0x00000011U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE18 0x00000012U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE19 0x00000013U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE20 0x00000014U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE21 0x00000015U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE22 0x00000016U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE23 0x00000017U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE24 0x00000018U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE25 0x00000019U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE26 0x0000001AU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE27 0x0000001BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE28 0x0000001CU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE29 0x0000001DU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE30 0x0000001EU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE31 0x0000001FU /*!< Internal define for macro handling */ + +#define HAL_ITLINE_WWDG ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG) /*!< WWDG has expired .... */ +#if defined (PWR_PVD_SUPPORT) +#define HAL_ITLINE_PVDOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT) /*!< Power voltage detection Interrupt .... */ +#endif /* PWR_PVD_SUPPORT */ +#if defined (PWR_PVM_SUPPORT) +#define HAL_ITLINE_PVMOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVMOUT) /*!< Power voltage monitor Interrupt .... */ +#endif /* PWR_PVM_SUPPORT */ +#define HAL_ITLINE_RTC ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC) /*!< RTC -> exti[19] Interrupt */ +#define HAL_ITLINE_TAMPER ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_TAMPER) /*!< TAMPER -> exti[21] interrupt .... */ +#define HAL_ITLINE_FLASH_ECC ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ECC) /*!< Flash ECC Interrupt */ +#define HAL_ITLINE_FLASH_ITF ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF) /*!< Flash ITF Interrupt */ +#define HAL_ITLINE_CLK_CTRL ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL) /*!< CLK Control Interrupt */ +#if defined (CRS) +#define HAL_ITLINE_CRS ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS) /*!< CRS Interrupt */ +#endif /*CRS */ +#define HAL_ITLINE_EXTI0 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0) /*!< External Interrupt 0 */ +#define HAL_ITLINE_EXTI1 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1) /*!< External Interrupt 1 */ +#define HAL_ITLINE_EXTI2 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2) /*!< External Interrupt 2 */ +#define HAL_ITLINE_EXTI3 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3) /*!< External Interrupt 3 */ +#define HAL_ITLINE_EXTI4 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4) /*!< EXTI4 Interrupt */ +#define HAL_ITLINE_EXTI5 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5) /*!< EXTI5 Interrupt */ +#define HAL_ITLINE_EXTI6 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6) /*!< EXTI6 Interrupt */ +#define HAL_ITLINE_EXTI7 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7) /*!< EXTI7 Interrupt */ +#define HAL_ITLINE_EXTI8 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8) /*!< EXTI8 Interrupt */ +#define HAL_ITLINE_EXTI9 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9) /*!< EXTI9 Interrupt */ +#define HAL_ITLINE_EXTI10 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10) /*!< EXTI10 Interrupt */ +#define HAL_ITLINE_EXTI11 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11) /*!< EXTI11 Interrupt */ +#define HAL_ITLINE_EXTI12 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12) /*!< EXTI12 Interrupt */ +#define HAL_ITLINE_EXTI13 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13) /*!< EXTI13 Interrupt */ +#define HAL_ITLINE_EXTI14 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14) /*!< EXTI14 Interrupt */ +#define HAL_ITLINE_EXTI15 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15) /*!< EXTI15 Interrupt */ +#if defined (UCPD1) +#define HAL_ITLINE_UCPD1 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD1) /*!< UCPD1 Interrupt */ +#endif /* UCPD1 */ +#if defined (UCPD2) +#define HAL_ITLINE_UCPD2 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD2) /*!< UCPD2 Interrupt */ +#endif /* UCPD2 */ +#if defined (STM32G0C1xx) || defined (STM32G0B1xx) || defined (STM32G0B0xx) +#define HAL_ITLINE_USB ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_USB) /*!< USB Interrupt */ +#endif /* STM32G0C1xx) || STM32G0B1xx) || STM32G0B0xx */ +#define HAL_ITLINE_DMA1_CH1 ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1) /*!< DMA1 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA1_CH2 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2) /*!< DMA1 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH3 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3) /*!< DMA1 Channel 3 Interrupt */ +#define HAL_ITLINE_DMAMUX1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMAMUX1) /*!< DMAMUX1 Interrupt */ +#define HAL_ITLINE_DMA1_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4) /*!< DMA1 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA1_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5) /*!< DMA1 Channel 5 Interrupt */ +#if defined(DMA1_Channel7) +#define HAL_ITLINE_DMA1_CH6 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6) /*!< DMA1 Channel 6 Interrupt */ +#define HAL_ITLINE_DMA1_CH7 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7) /*!< DMA1 Channel 7 Interrupt */ +#endif /* DMA1_Channel7 */ +#if defined (DMA2) +#define HAL_ITLINE_DMA2_CH1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH1) /*!< DMA2 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA2_CH2 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH2) /*!< DMA2 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA2_CH3 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3) /*!< DMA2 Channel 3 Interrupt */ +#define HAL_ITLINE_DMA2_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4) /*!< DMA2 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA2_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5) /*!< DMA2 Channel 5 Interrupt */ +#endif /* DMA2 */ +#define HAL_ITLINE_ADC ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC) /*!< ADC Interrupt */ +#if defined (COMP1) +#define HAL_ITLINE_COMP1 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1) /*!< COMP1 Interrupt -> exti[17] */ +#endif /* COMP1 */ +#if defined (COMP2) +#define HAL_ITLINE_COMP2 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2) /*!< COMP2 Interrupt -> exti[18] */ +#endif /* COMP2 */ +#if defined (COMP3) +#define HAL_ITLINE_COMP3 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP3) /*!< COMP3 Interrupt -> exti[1x] */ +#endif /* COMP3 */ +#define HAL_ITLINE_TIM1_BRK ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK) /*!< TIM1 BRK Interrupt */ +#define HAL_ITLINE_TIM1_UPD ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD) /*!< TIM1 UPD Interrupt */ +#define HAL_ITLINE_TIM1_TRG ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG) /*!< TIM1 TRG Interrupt */ +#define HAL_ITLINE_TIM1_CCU ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU) /*!< TIM1 CCU Interrupt */ +#define HAL_ITLINE_TIM1_CC ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC) /*!< TIM1 CC Interrupt */ +#if defined (TIM2) +#define HAL_ITLINE_TIM2 ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB) /*!< TIM2 Interrupt */ +#endif /* TIM2 */ +#define HAL_ITLINE_TIM3 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB) /*!< TIM3 Interrupt */ +#if defined (TIM4) +#define HAL_ITLINE_TIM4 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM4_GLB) /*!< TIM4 Interrupt */ +#endif /* TIM4 */ +#if defined(TIM6) +#define HAL_ITLINE_TIM6 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB) /*!< TIM6 Interrupt */ +#endif /* TIM6 */ +#if defined(DAC1) +#define HAL_ITLINE_DAC ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC) /*!< DAC Interrupt */ +#endif /* DAC1 */ +#if defined(LPTIM1) +#define HAL_ITLINE_LPTIM1 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_LPTIM1_GLB) /*!< LPTIM1 Interrupt -> exti[29] */ +#endif /* LPTIM1 */ +#if defined(TIM7) +#define HAL_ITLINE_TIM7 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB) /*!< TIM7 Interrupt */ +#endif /* TIM7 */ +#if defined(LPTIM2) +#define HAL_ITLINE_LPTIM2 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_LPTIM2_GLB) /*!< LPTIM2 Interrupt -> exti[30] */ +#endif /* LPTIM2 */ +#define HAL_ITLINE_TIM14 ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB) /*!< TIM14 Interrupt */ +#if defined(TIM15) +#define HAL_ITLINE_TIM15 ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB) /*!< TIM15 Interrupt */ +#endif /* TIM15 */ +#define HAL_ITLINE_TIM16 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB) /*!< TIM16 Interrupt */ +#if defined (FDCAN1) || defined (FDCAN2) +#define HAL_ITLINE_FDCAN1_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN1_IT0) /*!< FDCAN1_IT0 Interrupt */ +#define HAL_ITLINE_FDCAN2_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN2_IT0) /*!< FDCAN2_IT0 Interrupt */ +#endif /* FDCAN1 || FDCAN2 */ +#define HAL_ITLINE_TIM17 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB) /*!< TIM17 Interrupt */ +#if defined (FDCAN1) || defined (FDCAN2) +#define HAL_ITLINE_FDCAN1_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN1_IT1) /*!< FDCAN1_IT1 Interrupt */ +#define HAL_ITLINE_FDCAN2_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN2_IT1) /*!< FDCAN2_IT1 Interrupt */ +#endif /* FDCAN1 || FDCAN2 */ +#define HAL_ITLINE_I2C1 ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB) /*!< I2C1 Interrupt -> exti[23] */ +#define HAL_ITLINE_I2C2 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB) /*!< I2C2 Interrupt -> exti[24] */ +#if defined (I2C3) +#define HAL_ITLINE_I2C3 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C3_GLB) /*!< I2C3 Interrupt -> exti[22] */ +#endif /* I2C3 */ +#define HAL_ITLINE_SPI1 ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1) /*!< SPI1 Interrupt */ +#define HAL_ITLINE_SPI2 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2) /*!< SPI2 Interrupt */ +#if defined (SPI3) +#define HAL_ITLINE_SPI3 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI3) /*!< SPI3 Interrupt */ +#endif /* SPI3 */ +#define HAL_ITLINE_USART1 ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB) /*!< USART1 GLB Interrupt -> exti[25] */ +#define HAL_ITLINE_USART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB) /*!< USART2 GLB Interrupt -> exti[26] */ +#if defined (LPUART2) +#define HAL_ITLINE_LPUART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_LPUART2_GLB) /*!< LPUART2 GLB Interrupt -> exti[26] */ +#endif /* LPUART2 */ +#if defined(USART3) +#define HAL_ITLINE_USART3 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB) /*!< USART3 Interrupt .... */ +#endif /* USART3 */ +#if defined(USART4) +#define HAL_ITLINE_USART4 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB) /*!< USART4 Interrupt .... */ +#endif /* USART4 */ +#if defined (LPUART1) +#define HAL_ITLINE_LPUART1 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_LPUART1_GLB) /*!< LPUART1 Interrupt -> exti[28]*/ +#endif /* LPUART1 */ +#if defined (USART5) +#define HAL_ITLINE_USART5 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB) /*!< USART5 Interrupt .... */ +#endif /* USART5 */ +#if defined (USART6) +#define HAL_ITLINE_USART6 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB) /*!< USART6 Interrupt .... */ +#endif /* USART6 */ +#if defined (CEC) +#define HAL_ITLINE_CEC ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC) /*!< CEC Interrupt -> exti[27] */ +#endif /* CEC */ +#if defined (RNG) +#define HAL_ITLINE_RNG ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_RNG) /*!< RNG Interrupt */ +#endif /* RNG */ +#if defined (AES) +#define HAL_ITLINE_AES ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_AES) /*!< AES Interrupt */ +#endif /* AES */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBG_Exported_Macros DBG Exported Macros + * @{ + */ + +/** @brief Freeze and Unfreeze Peripherals in Debug mode + */ +#if defined(DBG_APB_FZ1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM2_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM3_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM4_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM6_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM7_STOP */ + +#if defined(DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#endif /* DBG_APB_FZ1_DBG_RTC_STOP */ + +#if defined(DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#endif /* DBG_APB_FZ1_DBG_WWDG_STOP */ + +#if defined(DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#endif /* DBG_APB_FZ1_DBG_IWDG_STOP */ + +#if defined(DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#endif /* DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP */ + +#if defined(DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#endif /* DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP */ + +#if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) +#endif /* DBG_APB_FZ1_DBG_LPTIM1_STOP */ + +#if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) +#endif /* DBG_APB_FZ1_DBG_LPTIM2_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM1_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM14_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM15_STOP) +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM15_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM16_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM17_STOP */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** + * @brief ISR wrapper check + * @note Allow to determine interrupt source per line. + */ +#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF)) + +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() \ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, (SYSCFG_CFGR1_MEM_MODE_1|SYSCFG_CFGR1_MEM_MODE_0)) + +/** + * @brief Return the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values @ref SYSCFG_BootMode + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief SYSCFG Break ECC lock. + * Enable and lock the connection of Flash ECC error connection to TIM1 Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL) + + +/** @brief SYSCFG Break Cortex-M0+ Lockup lock. + * Enables and locks the connection of Cortex-M0+ LOCKUP (Hardfault) output to TIM1/15/16/17 Break input + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) + +#if defined(SYSCFG_CFGR2_PVDL) +/** @brief SYSCFG Break PVD lock. + * Enables and locks the PVD connection with Timer1/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR register + * @note The selected configuration is locked and can be unlocked only by system reset + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL) +#endif /* SYSCFG_CFGR2_PVDL */ + +/** @brief SYSCFG Break SRAM PARITY lock + * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/15/16/17 + * @note The selected configuration is locked and can only be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() SET_BIT(SYSCFG->CFGR2,SYSCFG_CFGR2_SPL) + +/** @brief Parity check on RAM disable macro + * @note Disabling the parity check on RAM locks the configuration bit. + * To re-enable the parity check on RAM perform a system reset. + */ +#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SPF) + +/** @brief Set the PEF bit to clear the SRAM Parity Error Flag. + */ +#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @brief Clamping Diode on specific pins enable/disable macros + * @param __PIN__ This parameter can be a combination of values @ref SYSCFG_ClampingDiode + */ +#define __HAL_SYSCFG_CLAMPINGDIODE_ENABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ + SET_BIT(SYSCFG->CFGR2, (__PIN__));\ + }while(0U) + +#define __HAL_SYSCFG_CLAMPINGDIODE_DISABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ + CLEAR_BIT(SYSCFG->CFGR2, (__PIN__));\ + }while(0U) +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @brief ISR wrapper check + * @note Allow to determine interrupt source per line. + */ +#define __HAL_SYSCFG_GET_PENDING_IT(__SOURCE__) \ + (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFFU)) + +/** @brief selection of the modulation envelope signal macro, using bits [7:6] of SYSCFG_CFGR1 register + * @param __SOURCE__ This parameter can be a value of @ref HAL_IR_ENV_SEL + */ +#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD);\ + SET_BIT(SYSCFG->CFGR1, (__SOURCE__));\ + }while(0U) + +#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0U) + +/** @brief IROut Polarity Selection, using bit[5] of SYSCFG_CFGR1 register + * @param __SEL__ This parameter can be a value of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_IRDA_OUT_POLARITY_SELECTION(__SEL__) do { assert_param(IS_HAL_SYSCFG_IRDA_POL_SEL((__SEL__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL);\ + SET_BIT(SYSCFG->CFGR1,(__SEL__));\ + }while(0U) + +/** + * @brief Return the IROut Polarity mode as configured by user. + * @retval The IROut polarity as configured by user. The returned value can be one + * of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_GET_POLARITY() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL) + +/** @brief Break input to TIM1/15/16/17 capability enable/disable macros + * @param __BREAK__ This parameter can be a value of @ref SYSCFG_Break + */ +#define __HAL_SYSCFG_BREAK_ENABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + SET_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) + +#define __HAL_SYSCFG_BREAK_DISABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + CLEAR_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros + * @{ + */ +#if defined (PWR_PVD_SUPPORT) +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ + ((__CONFIG__) == SYSCFG_BREAK_PVD) || \ + ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) +#else +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ + ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) +#endif /* PWR_PVD_SUPPORT */ + +#if defined(SYSCFG_CDEN_SUPPORT) +#define IS_SYSCFG_CLAMPINGDIODE(__PIN__) ((((__PIN__) & SYSCFG_CDEN_PA1) == SYSCFG_CDEN_PA1) || \ + (((__PIN__) & SYSCFG_CDEN_PA3) == SYSCFG_CDEN_PA3) || \ + (((__PIN__) & SYSCFG_CDEN_PA5) == SYSCFG_CDEN_PA5) || \ + (((__PIN__) & SYSCFG_CDEN_PA6) == SYSCFG_CDEN_PA6) || \ + (((__PIN__) & SYSCFG_CDEN_PA13) == SYSCFG_CDEN_PA13) || \ + (((__PIN__) & SYSCFG_CDEN_PB0) == SYSCFG_CDEN_PB0) || \ + (((__PIN__) & SYSCFG_CDEN_PB1) == SYSCFG_CDEN_PB1) || \ + (((__PIN__) & SYSCFG_CDEN_PB2) == SYSCFG_CDEN_PB2)) +#endif /* SYSCFG_CDEN_SUPPORT */ + +#if defined (USART4) +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4)) +#else +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART2)) +#endif /* USART4 */ +#define IS_HAL_SYSCFG_IRDA_POL_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED) || \ + ((SEL) == HAL_SYSCFG_IRDA_POLARITY_INVERTED)) + +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +#define IS_SYSCFG_DBATT_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_UCPD1_STROBE) || \ + ((__CONFIG__) == SYSCFG_UCPD2_STROBE) || \ + ((__CONFIG__) == (SYSCFG_UCPD1_STROBE | SYSCFG_UCPD2_STROBE))) +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +#if defined(VREFBUF) +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) + +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ + ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) + +#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) +#endif /* VREFBUF */ + +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) + +#define IS_HAL_REMAP_PIN(RMP) (((RMP) == SYSCFG_REMAP_PA11) || \ + ((RMP) == SYSCFG_REMAP_PA12) || \ + ((RMP) == (SYSCFG_REMAP_PA11 | SYSCFG_REMAP_PA12))) +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions + * @{ + */ + +/* Initialization and Configuration functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions + * @{ + */ + +/* DBGMCU Peripheral Control functions *****************************************/ +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions + * @{ + */ + +/* SYSCFG Control functions ****************************************************/ + +#if defined(VREFBUF) +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); +void HAL_SYSCFG_DisableVREFBUF(void); +#endif /* VREFBUF */ + +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap); +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap); +#if defined(SYSCFG_CDEN_SUPPORT) +void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig); +void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig); +#endif /* SYSCFG_CDEN_SUPPORT */ +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery); +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h new file mode 100644 index 0000000..9f3ba0c --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h @@ -0,0 +1,1756 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc.h + * @author MCD Application Team + * @brief Header file of ADC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_ADC_H +#define STM32G0xx_HAL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/* Include low level driver */ +#include "stm32g0xx_ll_adc.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief ADC group regular oversampling structure definition + */ +typedef struct +{ + uint32_t Ratio; /*!< Configures the oversampling ratio. + This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ + + uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. + This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ + + uint32_t TriggeredMode; /*!< Selects the regular triggered oversampling mode. + This parameter can be a value of @ref ADC_HAL_EC_OVS_DISCONT_MODE */ + +} ADC_OversamplingTypeDef; + +/** + * @brief Structure definition of ADC instance and ADC group regular. + * @note Parameters of this structure are shared within 2 scopes: + * - Scope entire ADC (differentiation done for compatibility with some other STM32 series featuring ADC groups regular and injected): ClockPrescaler, Resolution, DataAlign, + * ScanConvMode, EOCSelection, LowPowerAutoWait. + * - Scope ADC group regular: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, + * ExternalTrigConv, ExternalTrigConvEdge, DMAContinuousRequests, Overrun, OversamplingMode, Oversampling. + * @note The setting of these parameters by function HAL_ADC_Init() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled + * - For all parameters except 'ClockPrescaler' and 'Resolution': ADC enabled without conversion on going on group regular. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another parameter + * (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from system clock or PLL (Refer to reference manual for list of clocks available)) and clock prescaler. + This parameter can be a value of @ref ADC_HAL_EC_COMMON_CLOCK_SOURCE. + Note: The ADC clock configuration is common to all ADC instances. + Note: In case of synchronous clock mode based on HCLK/1, the configuration must be enabled only + if the system clock has a 50% duty clock cycle (APB prescaler configured inside RCC + must be bypassed and PCLK clock must have 50% duty cycle). Refer to reference manual for details. + Note: In case of usage of asynchronous clock, the selected clock must be preliminarily enabled at RCC top level. + Note: This parameter can be modified only if all ADC instances are disabled. */ + + uint32_t Resolution; /*!< Configure the ADC resolution. + This parameter can be a value of @ref ADC_HAL_EC_RESOLUTION */ + + uint32_t DataAlign; /*!< Specify ADC data alignment in conversion data register (right or left). + Refer to reference manual for alignments formats versus resolutions. + This parameter can be a value of @ref ADC_HAL_EC_DATA_ALIGN */ + + uint32_t ScanConvMode; /*!< Configure the sequencer of ADC group regular. + On this STM32 series, ADC group regular sequencer both modes "fully configurable" or "not fully configurable" are + available: + - sequencer configured to fully configurable: + sequencer length and each rank affectation to a channel are configurable. + - Sequence length: Set number of ranks in the scan sequence. + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from rank 1 to rank n). + - sequencer configured to not fully configurable: + sequencer length and each rank affectation to a channel are fixed by channel HW number. + - Sequence length: Number of ranks in the scan sequence is + defined by number of channels set in the sequence, + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from lowest channel number to + highest channel number). + This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. + Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices): + If only 1 channel is set: Conversion is performed in single mode. + If several channels are set: Conversions are performed in sequence mode. + This parameter can be a value of @ref ADC_Scan_mode */ + + uint32_t EOCSelection; /*!< Specify which EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of unitary conversion or end of sequence conversions. + This parameter can be a value of @ref ADC_EOCSelection. */ + + FunctionalState LowPowerAutoWait; /*!< Select the dynamic low power Auto Delay: new conversion start only when the previous + conversion (for ADC group regular) has been retrieved by user software, + using function HAL_ADC_GetValue(). + This feature automatically adapts the frequency of ADC conversions triggers to the speed of the system that reads the data. Moreover, this avoids risk of overrun + for low frequency applications. + This parameter can be set to ENABLE or DISABLE. + Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC flag (by CPU to free the IRQ pending event or by DMA). + Auto wait will work but fort a very short time, discarding its intended benefit (except specific case of high load of CPU or DMA transfers which can justify usage of auto wait). + Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when ADC conversion data is needed: + use HAL_ADC_PollForConversion() to ensure that conversion is completed and HAL_ADC_GetValue() to retrieve conversion result and trig another conversion start. */ + + FunctionalState LowPowerAutoPowerOff; /*!< Select the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling). + This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait'). + This parameter can be set to ENABLE or DISABLE. + Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */ + + FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) or continuous mode for ADC group regular, + after the first ADC conversion start trigger occurred (software start or external trigger). + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t NbrOfConversion; /*!< Specify the number of ranks that will be converted within the regular group sequencer. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Number of ranks in the scan sequence is configurable using this parameter. + Note: After the first call of 'HAL_ADC_Init()', each rank corresponding to parameter "NbrOfConversion" must be set using 'HAL_ADC_ConfigChannel()'. + Afterwards, when all needed sequencer ranks are set, parameter 'NbrOfConversion' can be updated without modifying configuration of sequencer ranks + (sequencer ranks above 'NbrOfConversion' are discarded). + - sequencer configured to not fully configurable: + Number of ranks in the scan sequence is defined by number of channels set in the sequence. This parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. + Note: This parameter must be modified when no conversion is on going on regular group (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion). */ + + FunctionalState DiscontinuousConvMode; /*!< Specify whether the conversions sequence of ADC group regular is performed in Complete-sequence/Discontinuous-sequence + (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. + Note: On this STM32 series, ADC group regular number of discontinuous ranks increment is fixed to one-by-one. */ + + uint32_t ExternalTrigConv; /*!< Select the external event source used to trigger ADC group regular conversion start. + If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger is used instead. + This parameter can be a value of @ref ADC_regular_external_trigger_source. + Caution: external trigger source is common to all ADC instances. */ + + uint32_t ExternalTrigConvEdge; /*!< Select the external event edge used to trigger ADC group regular conversion start. + If trigger source is set to ADC_SOFTWARE_START, this parameter is discarded. + This parameter can be a value of @ref ADC_regular_external_trigger_edge */ + + FunctionalState DMAContinuousRequests; /*!< Specify whether the DMA requests are performed in one shot mode (DMA transfer stops when number of conversions is reached) + or in continuous mode (DMA transfer unlimited, whatever number of conversions). + This parameter can be set to ENABLE or DISABLE. + Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. */ + + uint32_t Overrun; /*!< Select the behavior in case of overrun: data overwritten or preserved (default). + This parameter can be a value of @ref ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR. + Note: In case of overrun set to data preserved and usage with programming model with interruption (HAL_Start_IT()): ADC IRQ handler has to clear + end of conversion flags, this induces the release of the preserved data. If needed, this data can be saved in function + HAL_ADC_ConvCpltCallback(), placed in user program code (called before end of conversion flags clear). + Note: Error reporting with respect to the conversion mode: + - Usage with ADC conversion by polling for event or interruption: Error is reported only if overrun is set to data preserved. If overrun is set to data + overwritten, user can willingly not read all the converted data, this is not considered as an erroneous case. + - Usage with ADC conversion by DMA: Error is reported whatever overrun setting (DMA is expected to process all data from data register). */ + + uint32_t SamplingTimeCommon1; /*!< Set sampling time common to a group of channels. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + uint32_t SamplingTimeCommon2; /*!< Set sampling time common to a group of channels, second common setting possible. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + FunctionalState OversamplingMode; /*!< Specify whether the oversampling feature is enabled or disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter can be modified only if there is no conversion is ongoing on ADC group regular. */ + + ADC_OversamplingTypeDef Oversampling; /*!< Specify the Oversampling parameters. + Caution: this setting overwrites the previous oversampling configuration if oversampling is already enabled. */ + + uint32_t TriggerFrequencyMode; /*!< Set ADC trigger frequency mode. + This parameter can be a value of @ref ADC_HAL_EC_REG_TRIGGER_FREQ. + Note: ADC trigger frequency mode must be set to low frequency when + a duration is exceeded before ADC conversion start trigger event + (between ADC enable and ADC conversion start trigger event + or between two ADC conversion start trigger event). + Duration value: Refer to device datasheet, parameter "tIdle". + Note: When ADC trigger frequency mode is set to low frequency, + some rearm cycles are inserted before performing ADC conversion + start, inducing a delay of 2 ADC clock cycles. */ + +} ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters by function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled or enabled without conversion on going on regular group. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another parameter (which fulfills the ADC state condition) + * on the fly). + */ +typedef struct +{ + uint32_t Channel; /*!< Specify the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL + Note: Depending on devices and ADC instances, some channels may not be available on device package pins. Refer to device datasheet for channels availability. */ + + uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer and specify its conversion rank. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Channels ordering into each rank of scan sequence: + whatever channel can be placed into whatever rank. + - sequencer configured to not fully configurable: + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer. + This parameter can be a value of @ref ADC_HAL_EC_REG_SEQ_RANKS */ + + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_HAL_EC_SAMPLINGTIME_COMMON + Note: On this STM32 family, two different sampling time settings are available (refer to parameters "SamplingTimeCommon1" and "SamplingTimeCommon2"), each channel can use one of these two settings. + + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values. */ + +} ADC_ChannelConfTypeDef; + +/** + * @brief Structure definition of ADC analog watchdog + * @note The setting of these parameters by function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters except 'HighThreshold', 'LowThreshold': ADC disabled or ADC enabled without conversion on going on ADC groups regular. + * - For parameters 'HighThreshold', 'LowThreshold': ADC enabled with conversion on going on regular. + */ +typedef struct +{ + uint32_t WatchdogNumber; /*!< Select which ADC analog watchdog is monitoring the selected channel. + For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels by setting parameter 'WatchdogMode') + For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel) + This parameter can be a value of @ref ADC_HAL_EC_AWD_NUMBER. */ + + uint32_t WatchdogMode; /*!< Configure the ADC analog watchdog mode: single/all/none channels. + For Analog Watchdog 1: Configure the ADC analog watchdog mode: single channel or all channels, ADC group regular. + For Analog Watchdog 2 and 3: Several channels can be monitored by applying successively the AWD init structure. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + + uint32_t Channel; /*!< Select which ADC channel to monitor by analog watchdog. + For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' is configured on single channel (only 1 channel can be monitored). + For Analog Watchdog 2 and 3: Several channels can be monitored. To use this feature, call successively the function HAL_ADC_AnalogWDGConfig() for each channel to be added (or removed with value 'ADC_ANALOGWATCHDOG_NONE'). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL. */ + + FunctionalState ITMode; /*!< Specify whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t HighThreshold; /*!< Configure the ADC analog watchdog High threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number + between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits + the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ + + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog Low threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number + between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits + the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ +} ADC_AnalogWDGConfTypeDef; + +/** @defgroup ADC_States ADC States + * @{ + */ + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + * @note ADC state machine is managed by bitfields, state must be compared + * with bit by bit. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET (0x00000000UL) /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY (0x00000001UL) /*!< ADC peripheral ready for use */ +#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002UL) /*!< ADC is busy due to an internal process (initialization, calibration) */ +#define HAL_ADC_STATE_TIMEOUT (0x00000004UL) /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010UL) /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020UL) /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA (0x00000040UL) /*!< DMA error occurrence */ + +/* States of ADC group regular */ +#define HAL_ADC_STATE_REG_BUSY (0x00000100UL) /*!< A conversion on ADC group regular is ongoing or can occur (either by continuous mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */ +#define HAL_ADC_STATE_REG_EOC (0x00000200UL) /*!< Conversion data available on group regular */ +#define HAL_ADC_STATE_REG_OVR (0x00000400UL) /*!< Overrun occurrence */ +#define HAL_ADC_STATE_REG_EOSMP (0x00000800UL) /*!< Not available on this STM32 series: End Of Sampling flag raised */ + +/* States of ADC group injected */ +#define HAL_ADC_STATE_INJ_BUSY (0x00001000UL) /*!< Not available on this STM32 series: A conversion on group injected is ongoing or can occur (either by auto-injection mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available))*/ +#define HAL_ADC_STATE_INJ_EOC (0x00002000UL) /*!< Not available on this STM32 series: Conversion data available on group injected */ +#define HAL_ADC_STATE_INJ_JQOVF (0x00004000UL) /*!< Not available on this STM32 series: Injected queue overflow occurrence */ + +/* States of ADC analog watchdogs */ +#define HAL_ADC_STATE_AWD1 (0x00010000UL) /*!< Out-of-window occurrence of ADC analog watchdog 1 */ +#define HAL_ADC_STATE_AWD2 (0x00020000UL) /*!< Out-of-window occurrence of ADC analog watchdog 2 */ +#define HAL_ADC_STATE_AWD3 (0x00040000UL) /*!< Out-of-window occurrence of ADC analog watchdog 3 */ + +/* States of ADC multi-mode */ +#define HAL_ADC_STATE_MULTIMODE_SLAVE (0x00100000UL) /*!< Not available on this STM32 series: ADC in multimode slave state, controlled by another ADC master (when feature available) */ + + +/** + * @} + */ + +/** + * @brief ADC handle Structure definition + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +typedef struct __ADC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +{ + ADC_TypeDef *Instance; /*!< Register base address */ + ADC_InitTypeDef Init; /*!< ADC initialization parameters and regular conversions setting */ + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + HAL_LockTypeDef Lock; /*!< ADC locking object */ + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + __IO uint32_t ErrorCode; /*!< ADC Error code */ + + uint32_t ADCGroupRegularSequencerRanks; /*!< ADC group regular sequencer memorization of ranks setting, used in mode "fully configurable" (refer to parameter 'ScanConvMode') */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ + void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ + void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ + void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ + void (* LevelOutOfWindow2Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 2 callback */ + void (* LevelOutOfWindow3Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 3 callback */ + void (* EndOfSamplingCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC end of sampling callback */ + void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ + void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} ADC_HandleTypeDef; + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL ADC Callback ID enumeration definition + */ +typedef enum +{ + HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ + HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ + HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID = 0x06U, /*!< ADC analog watchdog 2 callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID = 0x07U, /*!< ADC analog watchdog 3 callback ID */ + HAL_ADC_END_OF_SAMPLING_CB_ID = 0x08U, /*!< ADC end of sampling callback ID */ + HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ + HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ +} HAL_ADC_CallbackIDTypeDef; + +/** + * @brief HAL ADC Callback pointer definition + */ +typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< ADC peripheral internal error (problem of clocking, + enable/disable, erroneous state, ...) */ +#define HAL_ADC_ERROR_OVR (0x02U) /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define ADC_CLOCK_SYNC_PCLK_DIV1 (LL_ADC_CLOCK_SYNC_PCLK_DIV1) /*!< ADC synchronous clock derived from AHB clock without prescaler. This configuration must be enabled only if PCLK has a 50% duty clock cycle (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle) */ +#define ADC_CLOCK_SYNC_PCLK_DIV2 (LL_ADC_CLOCK_SYNC_PCLK_DIV2) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */ +#define ADC_CLOCK_SYNC_PCLK_DIV4 (LL_ADC_CLOCK_SYNC_PCLK_DIV4) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */ + +#define ADC_CLOCK_ASYNC_DIV1 (LL_ADC_CLOCK_ASYNC_DIV1) /*!< ADC asynchronous clock without prescaler */ +#define ADC_CLOCK_ASYNC_DIV2 (LL_ADC_CLOCK_ASYNC_DIV2) /*!< ADC asynchronous clock with prescaler division by 2 */ +#define ADC_CLOCK_ASYNC_DIV4 (LL_ADC_CLOCK_ASYNC_DIV4) /*!< ADC asynchronous clock with prescaler division by 4 */ +#define ADC_CLOCK_ASYNC_DIV6 (LL_ADC_CLOCK_ASYNC_DIV6) /*!< ADC asynchronous clock with prescaler division by 6 */ +#define ADC_CLOCK_ASYNC_DIV8 (LL_ADC_CLOCK_ASYNC_DIV8) /*!< ADC asynchronous clock with prescaler division by 8 */ +#define ADC_CLOCK_ASYNC_DIV10 (LL_ADC_CLOCK_ASYNC_DIV10) /*!< ADC asynchronous clock with prescaler division by 10 */ +#define ADC_CLOCK_ASYNC_DIV12 (LL_ADC_CLOCK_ASYNC_DIV12) /*!< ADC asynchronous clock with prescaler division by 12 */ +#define ADC_CLOCK_ASYNC_DIV16 (LL_ADC_CLOCK_ASYNC_DIV16) /*!< ADC asynchronous clock with prescaler division by 16 */ +#define ADC_CLOCK_ASYNC_DIV32 (LL_ADC_CLOCK_ASYNC_DIV32) /*!< ADC asynchronous clock with prescaler division by 32 */ +#define ADC_CLOCK_ASYNC_DIV64 (LL_ADC_CLOCK_ASYNC_DIV64) /*!< ADC asynchronous clock with prescaler division by 64 */ +#define ADC_CLOCK_ASYNC_DIV128 (LL_ADC_CLOCK_ASYNC_DIV128) /*!< ADC asynchronous clock with prescaler division by 128 */ +#define ADC_CLOCK_ASYNC_DIV256 (LL_ADC_CLOCK_ASYNC_DIV256) /*!< ADC asynchronous clock with prescaler division by 256 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define ADC_RESOLUTION_12B (LL_ADC_RESOLUTION_12B) /*!< ADC resolution 12 bits */ +#define ADC_RESOLUTION_10B (LL_ADC_RESOLUTION_10B) /*!< ADC resolution 10 bits */ +#define ADC_RESOLUTION_8B (LL_ADC_RESOLUTION_8B) /*!< ADC resolution 8 bits */ +#define ADC_RESOLUTION_6B (LL_ADC_RESOLUTION_6B) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment + * @{ + */ +#define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC sequencer scan mode + * @{ + */ +/* Note: On this STM32 family, ADC group regular sequencer both modes */ +/* "fully configurable" or "not fully configurable" are */ +/* available. */ +/* Scan mode values must be compatible with other STM32 devices having */ +/* a configurable sequencer. */ +/* Scan direction setting values are defined by taking in account */ +/* already defined values for other STM32 devices: */ +/* ADC_SCAN_DISABLE (0x00000000UL) */ +/* ADC_SCAN_ENABLE (0x00000001UL) */ +/* Sequencer fully configurable with only rank 1 enabled is considered */ +/* as default setting equivalent to scan enable. */ +/* In case of migration from another STM32 device, the user will be */ +/* warned of change of setting choices with assert check. */ +#define ADC_SCAN_DISABLE (0x00000000UL) /*!< Sequencer set to fully configurable: only the rank 1 is enabled (no scan sequence on several ranks) */ +#define ADC_SCAN_ENABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer set to fully configurable: sequencer length and each rank affectation to a channel are configurable. */ + +#define ADC_SCAN_SEQ_FIXED (ADC_SCAN_SEQ_FIXED_INT) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction forward: from channel 0 to channel 18 */ +#define ADC_SCAN_SEQ_FIXED_BACKWARD (ADC_SCAN_SEQ_FIXED_INT | ADC_CFGR1_SCANDIR) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction backward: from channel 18 to channel 0 */ + +#define ADC_SCAN_DIRECTION_FORWARD (ADC_SCAN_SEQ_FIXED) /* For compatibility with other STM32 devices */ +#define ADC_SCAN_DIRECTION_BACKWARD (ADC_SCAN_SEQ_FIXED_BACKWARD) /* For compatibility with other STM32 devices */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_source ADC group regular trigger source + * @{ + */ +/* ADC group regular trigger sources for all ADC instances */ +#define ADC_SOFTWARE_START (LL_ADC_REG_TRIG_SOFTWARE) /*!< ADC group regular conversion trigger internal: SW start. */ +#define ADC_EXTERNALTRIG_T1_TRGO2 (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_T1_CC4 (LL_ADC_REG_TRIG_EXT_TIM1_CH4) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#if defined(TIM2) +#define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define ADC_EXTERNALTRIG_T3_TRGO (LL_ADC_REG_TRIG_EXT_TIM3_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#if defined(TIM4) +#define ADC_EXTERNALTRIG_T4_TRGO (LL_ADC_REG_TRIG_EXT_TIM4_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM6) +#define ADC_EXTERNALTRIG_T6_TRGO (LL_ADC_REG_TRIG_EXT_TIM6_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM15) +#define ADC_EXTERNALTRIG_T15_TRGO (LL_ADC_REG_TRIG_EXT_TIM15_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_edge ADC group regular trigger edge (when external trigger is selected) + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE (0x00000000UL) /*!< Regular conversions hardware trigger detection disabled */ +#define ADC_EXTERNALTRIGCONVEDGE_RISING (LL_ADC_REG_TRIG_EXT_RISING) /*!< ADC group regular conversion trigger polarity set to rising edge */ +#define ADC_EXTERNALTRIGCONVEDGE_FALLING (LL_ADC_REG_TRIG_EXT_FALLING) /*!< ADC group regular conversion trigger polarity set to falling edge */ +#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING (LL_ADC_REG_TRIG_EXT_RISINGFALLING) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_EOCSelection ADC sequencer end of unitary conversion or sequence conversions + * @{ + */ +#define ADC_EOC_SINGLE_CONV (ADC_ISR_EOC) /*!< End of unitary conversion flag */ +#define ADC_EOC_SEQ_CONV (ADC_ISR_EOS) /*!< End of sequence conversions flag */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define ADC_OVR_DATA_PRESERVED (LL_ADC_REG_OVR_DATA_PRESERVED) /*!< ADC group regular behavior in case of overrun: data preserved */ +#define ADC_OVR_DATA_OVERWRITTEN (LL_ADC_REG_OVR_DATA_OVERWRITTEN) /*!< ADC group regular behavior in case of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define ADC_RANK_CHANNEL_NUMBER (0x00000001U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Enable the rank of the selected channels. Number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */ +#define ADC_RANK_NONE (0x00000002U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Disable the selected rank (selected channel) from sequencer */ + +#define ADC_REGULAR_RANK_1 (LL_ADC_REG_RANK_1) /*!< ADC group regular sequencer rank 1 */ +#define ADC_REGULAR_RANK_2 (LL_ADC_REG_RANK_2) /*!< ADC group regular sequencer rank 2 */ +#define ADC_REGULAR_RANK_3 (LL_ADC_REG_RANK_3) /*!< ADC group regular sequencer rank 3 */ +#define ADC_REGULAR_RANK_4 (LL_ADC_REG_RANK_4) /*!< ADC group regular sequencer rank 4 */ +#define ADC_REGULAR_RANK_5 (LL_ADC_REG_RANK_5) /*!< ADC group regular sequencer rank 5 */ +#define ADC_REGULAR_RANK_6 (LL_ADC_REG_RANK_6) /*!< ADC group regular sequencer rank 6 */ +#define ADC_REGULAR_RANK_7 (LL_ADC_REG_RANK_7) /*!< ADC group regular sequencer rank 7 */ +#define ADC_REGULAR_RANK_8 (LL_ADC_REG_RANK_8) /*!< ADC group regular sequencer rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define ADC_SAMPLINGTIME_COMMON_1 (LL_ADC_SAMPLINGTIME_COMMON_1) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define ADC_SAMPLINGTIME_COMMON_2 (LL_ADC_SAMPLINGTIME_COMMON_2) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define ADC_SAMPLETIME_1CYCLE_5 (LL_ADC_SAMPLINGTIME_1CYCLE_5) /*!< Sampling time 1.5 ADC clock cycle */ +#define ADC_SAMPLETIME_3CYCLES_5 (LL_ADC_SAMPLINGTIME_3CYCLES_5) /*!< Sampling time 3.5 ADC clock cycles */ +#define ADC_SAMPLETIME_7CYCLES_5 (LL_ADC_SAMPLINGTIME_7CYCLES_5) /*!< Sampling time 7.5 ADC clock cycles */ +#define ADC_SAMPLETIME_12CYCLES_5 (LL_ADC_SAMPLINGTIME_12CYCLES_5) /*!< Sampling time 12.5 ADC clock cycles */ +#define ADC_SAMPLETIME_19CYCLES_5 (LL_ADC_SAMPLINGTIME_19CYCLES_5) /*!< Sampling time 19.5 ADC clock cycles */ +#define ADC_SAMPLETIME_39CYCLES_5 (LL_ADC_SAMPLINGTIME_39CYCLES_5) /*!< Sampling time 39.5 ADC clock cycles */ +#define ADC_SAMPLETIME_79CYCLES_5 (LL_ADC_SAMPLINGTIME_79CYCLES_5) /*!< Sampling time 79.5 ADC clock cycles */ +#define ADC_SAMPLETIME_160CYCLES_5 (LL_ADC_SAMPLINGTIME_160CYCLES_5) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define ADC_CHANNEL_0 (LL_ADC_CHANNEL_0) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ +#define ADC_CHANNEL_1 (LL_ADC_CHANNEL_1) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ +#define ADC_CHANNEL_2 (LL_ADC_CHANNEL_2) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ +#define ADC_CHANNEL_3 (LL_ADC_CHANNEL_3) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */ +#define ADC_CHANNEL_4 (LL_ADC_CHANNEL_4) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */ +#define ADC_CHANNEL_5 (LL_ADC_CHANNEL_5) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */ +#define ADC_CHANNEL_6 (LL_ADC_CHANNEL_6) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */ +#define ADC_CHANNEL_7 (LL_ADC_CHANNEL_7) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */ +#define ADC_CHANNEL_8 (LL_ADC_CHANNEL_8) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */ +#define ADC_CHANNEL_9 (LL_ADC_CHANNEL_9) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */ +#define ADC_CHANNEL_10 (LL_ADC_CHANNEL_10) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */ +#define ADC_CHANNEL_11 (LL_ADC_CHANNEL_11) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */ +#define ADC_CHANNEL_12 (LL_ADC_CHANNEL_12) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */ +#define ADC_CHANNEL_13 (LL_ADC_CHANNEL_13) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */ +#define ADC_CHANNEL_14 (LL_ADC_CHANNEL_14) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */ +#define ADC_CHANNEL_15 (LL_ADC_CHANNEL_15) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ +#define ADC_CHANNEL_16 (LL_ADC_CHANNEL_16) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ +#define ADC_CHANNEL_17 (LL_ADC_CHANNEL_17) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ +#define ADC_CHANNEL_18 (LL_ADC_CHANNEL_18) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ +#define ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_VREFINT) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ +#define ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_TEMPSENSOR) /*!< ADC internal channel connected to Temperature sensor. */ +#define ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_VBAT) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define ADC_ANALOGWATCHDOG_1 (LL_ADC_AWD1) /*!< ADC analog watchdog number 1 */ +#define ADC_ANALOGWATCHDOG_2 (LL_ADC_AWD2) /*!< ADC analog watchdog number 2 */ +#define ADC_ANALOGWATCHDOG_3 (LL_ADC_AWD3) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC Analog Watchdog Mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE (0x00000000UL) /*!< No analog watchdog selected */ +#define ADC_ANALOGWATCHDOG_SINGLE_REG (ADC_CFGR1_AWD1SGL | ADC_CFGR1_AWD1EN) /*!< Analog watchdog applied to a regular group single channel */ +#define ADC_ANALOGWATCHDOG_ALL_REG (ADC_CFGR1_AWD1EN) /*!< Analog watchdog applied to regular group all channels */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define ADC_OVERSAMPLING_RATIO_2 (LL_ADC_OVS_RATIO_2) /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_4 (LL_ADC_OVS_RATIO_4) /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_8 (LL_ADC_OVS_RATIO_8) /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_16 (LL_ADC_OVS_RATIO_16) /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_32 (LL_ADC_OVS_RATIO_32) /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_64 (LL_ADC_OVS_RATIO_64) /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_128 (LL_ADC_OVS_RATIO_128) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_256 (LL_ADC_OVS_RATIO_256) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +#define ADC_RIGHTBITSHIFT_NONE (LL_ADC_OVS_SHIFT_NONE) /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_1 (LL_ADC_OVS_SHIFT_RIGHT_1) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_2 (LL_ADC_OVS_SHIFT_RIGHT_2) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_3 (LL_ADC_OVS_SHIFT_RIGHT_3) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_4 (LL_ADC_OVS_SHIFT_RIGHT_4) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_5 (LL_ADC_OVS_SHIFT_RIGHT_5) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_6 (LL_ADC_OVS_SHIFT_RIGHT_6) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_7 (LL_ADC_OVS_SHIFT_RIGHT_7) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_8 (LL_ADC_OVS_SHIFT_RIGHT_8) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define ADC_TRIGGEREDMODE_SINGLE_TRIGGER (LL_ADC_OVS_REG_CONT) /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */ +#define ADC_TRIGGEREDMODE_MULTI_TRIGGER (LL_ADC_OVS_REG_DISCONT) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define ADC_TRIGGER_FREQ_HIGH (LL_ADC_TRIGGER_FREQ_HIGH) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define ADC_TRIGGER_FREQ_LOW (LL_ADC_TRIGGER_FREQ_LOW) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +#define ADC_EOSMP_EVENT (ADC_FLAG_EOSMP) /*!< ADC End of Sampling event */ +#define ADC_AWD1_EVENT (ADC_FLAG_AWD1) /*!< ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 series) */ +#define ADC_AWD2_EVENT (ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 series) */ +#define ADC_AWD3_EVENT (ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 series) */ +#define ADC_OVR_EVENT (ADC_FLAG_OVR) /*!< ADC overrun event */ +/** + * @} + */ +#define ADC_AWD_EVENT ADC_AWD1_EVENT /*!< ADC Analog watchdog 1 event: Naming for compatibility with other STM32 devices having only one analog watchdog */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */ +#define ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC channel configuration ready interrupt source */ +#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of sampling interrupt source */ +#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of regular conversion interrupt source */ +#define ADC_IT_EOS ADC_IER_EOSIE /*!< ADC End of regular sequence of conversions interrupt source */ +#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ +#define ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog) */ +#define ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC Analog watchdog 2 interrupt source (additional analog watchdog) */ +#define ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC Analog watchdog 3 interrupt source (additional analog watchdog) */ +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */ +#define ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC channel configuration ready flag */ +#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */ +#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ +#define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ +#define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag */ +#define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag */ +#define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Test if conversion trigger of regular group is software start + * or external trigger. + * @param __HANDLE__ ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ + (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == 0UL) + +/** + * @brief Return resolution bits in CFGR1 register RES[1:0] field. + * @param __HANDLE__ ADC handle + * @retval Value of bitfield RES in CFGR1 register. + */ +#define ADC_GET_RESOLUTION(__HANDLE__) \ + (LL_ADC_GetResolution((__HANDLE__)->Instance)) + +/** + * @brief Clear ADC error code (set it to no error code "HAL_ADC_ERROR_NONE"). + * @param __HANDLE__ ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Simultaneously clear and set specific bits of the handle State. + * @note ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Enable ADC discontinuous conversion mode for regular group + * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode. + * @retval None + */ +#define ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) \ + ((_REG_DISCONTINUOUS_MODE_) << 16U) + +/** + * @brief Enable the ADC auto off mode. + * @param _AUTOOFF_ Auto off bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOOFF(_AUTOOFF_) \ + ((_AUTOOFF_) << 15U) + +/** + * @brief Enable the ADC auto delay mode. + * @param _AUTOWAIT_ Auto delay bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) \ + ((_AUTOWAIT_) << 14U) + +/** + * @brief Enable ADC continuous conversion mode. + * @param _CONTINUOUS_MODE_ Continuous mode. + * @retval None + */ +#define ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) \ + ((_CONTINUOUS_MODE_) << 13U) + +/** + * @brief Enable ADC overrun mode. + * @param _OVERRUN_MODE_ Overrun mode. + * @retval Overrun bit setting to be programmed into CFGR register + */ +/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */ +/* "ADC_OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it */ +/* as the default case to be compliant with other STM32 devices. */ +#define ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \ + ( ( (_OVERRUN_MODE_) != (ADC_OVR_DATA_PRESERVED) \ + )? (ADC_CFGR1_OVRMOD) : (0x00000000UL) \ + ) + +/** + * @brief Set ADC scan mode with differentiation of sequencer setting + * fixed or configurable + * @param _SCAN_MODE_ Scan conversion mode. + * @retval None + */ +/* Note: Scan mode set using this macro (instead of parameter direct set) */ +/* due to different modes on other STM32 devices: */ +/* if scan mode is disabled, sequencer is set to fully configurable */ +/* with setting of only rank 1 enabled afterwards. */ +#define ADC_SCAN_SEQ_MODE(_SCAN_MODE_) \ + ( (((_SCAN_MODE_) & ADC_SCAN_SEQ_FIXED_INT) != 0UL \ + )? \ + ((_SCAN_MODE_) & (~ADC_SCAN_SEQ_FIXED_INT)) \ + : \ + (ADC_CFGR1_CHSELRMOD) \ + ) + +/** + * @brief Enable the ADC DMA continuous request. + * @param _DMACONTREQ_MODE_: DMA continuous request mode. + * @retval None + */ +#define ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) \ + ((_DMACONTREQ_MODE_) << 1U) + +/** + * @brief Shift the AWD threshold in function of the selected ADC resolution. + * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)) + * @param __HANDLE__ ADC handle + * @param _Threshold_ Value to be shifted + * @retval None + */ +#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \ + ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3U)*2U)) + +#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV1) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV1 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV2 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV4 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV6 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV8 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV10 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV12 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV16 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV32 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV64 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV128 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV256)) + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ + ((RESOLUTION) == ADC_RESOLUTION_10B) || \ + ((RESOLUTION) == ADC_RESOLUTION_8B) || \ + ((RESOLUTION) == ADC_RESOLUTION_6B) ) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ + ((ALIGN) == ADC_DATAALIGN_LEFT) ) + +#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \ + ((SCAN_MODE) == ADC_SCAN_ENABLE) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED_BACKWARD) ) + +#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) + +#if defined(TIM15) && defined(TIM6) && defined(TIM2) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T6_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T15_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#elif defined(TIM15) && defined(TIM6) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T6_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T15_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#elif defined(TIM2) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#else +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#endif + +#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \ + ((EOC_SELECTION) == ADC_EOC_SEQ_CONV)) + +#define IS_ADC_OVERRUN(OVR) (((OVR) == ADC_OVR_DATA_PRESERVED) || \ + ((OVR) == ADC_OVR_DATA_OVERWRITTEN) ) + +#define IS_ADC_REGULAR_RANK_SEQ_FIXED(RANK) (((RANK) == ADC_RANK_CHANNEL_NUMBER) || \ + ((RANK) == ADC_RANK_NONE) ) + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) == ADC_REGULAR_RANK_1 ) || \ + ((RANK) == ADC_REGULAR_RANK_2 ) || \ + ((RANK) == ADC_REGULAR_RANK_3 ) || \ + ((RANK) == ADC_REGULAR_RANK_4 ) || \ + ((RANK) == ADC_REGULAR_RANK_5 ) || \ + ((RANK) == ADC_REGULAR_RANK_6 ) || \ + ((RANK) == ADC_REGULAR_RANK_7 ) || \ + ((RANK) == ADC_REGULAR_RANK_8 ) ) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_16) || \ + ((CHANNEL) == ADC_CHANNEL_17) || \ + ((CHANNEL) == ADC_CHANNEL_18) || \ + ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \ + ((CHANNEL) == ADC_CHANNEL_VREFINT) || \ + ((CHANNEL) == ADC_CHANNEL_VBAT) ) + +#define IS_ADC_SAMPLING_TIME_COMMON(SAMPLING_TIME_COMMON) (((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_1) || \ + ((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_2) ) + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \ + ((TIME) == ADC_SAMPLETIME_3CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_12CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_19CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_39CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_79CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_160CYCLES_5) ) + +#define IS_ADC_ANALOG_WATCHDOG_NUMBER(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_1) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_2) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_3) ) + +#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) ) + +#define IS_ADC_TRIGGER_FREQ(TRIGGER_FREQ) (((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_HIGH) || \ + ((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_LOW) ) + +#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_EOSMP_EVENT) || \ + ((EVENT) == ADC_AWD1_EVENT) || \ + ((EVENT) == ADC_AWD2_EVENT) || \ + ((EVENT) == ADC_AWD3_EVENT) || \ + ((EVENT) == ADC_OVR_EVENT) ) + +/** + * @brief Verify that a given value is aligned with the ADC resolution range. + * @param __RESOLUTION__ ADC resolution (12, 10, 8 or 6 bits). + * @param __ADC_VALUE__ value checked against the resolution. + * @retval SET (__ADC_VALUE__ in line with __RESOLUTION__) or RESET (__ADC_VALUE__ not in line with __RESOLUTION__) + */ +#define IS_ADC_RANGE(__RESOLUTION__, __ADC_VALUE__) \ + ((__ADC_VALUE__) <= __LL_ADC_DIGITAL_SCALE(__RESOLUTION__)) + +/** @defgroup ADC_regular_nb_conv_verification ADC Regular Conversion Number Verification + * @{ + */ +#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= 1UL) && ((LENGTH) <= 8UL)) +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */ +#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC) + +#define ADC_SCAN_SEQ_FIXED_INT 0x80000000U /* Internal definition to differentiate sequencer setting fixed or configurable */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** @defgroup ADC_HAL_EM_HANDLE_IT_FLAG HAL ADC macro to manage HAL ADC handle, IT and flags. + * @{ + */ + +/** @brief Reset ADC handle state. + * @param __HANDLE__ ADC handle + * @retval None + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @brief Enable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) + +/** + * @brief Disable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC interrupt source to check + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval State of interruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Check whether the specified ADC flag is set or not. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval State of flag (TRUE or FALSE). + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified ADC flag. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval None + */ +/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (((__HANDLE__)->Instance->ISR) = (__FLAG__)) + +/** + * @} + */ + +/** @defgroup ADC_HAL_EM_HELPER_MACRO HAL ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals ADC_CHANNEL_x. + * @note Example: + * __HAL_ADC_CHANNEL_TO_DECIMAL_NB(ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __HAL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + __LL_ADC_CHANNEL_TO_DECIMAL_NB((__CHANNEL__)) + +/** + * @brief Helper macro to get ADC channel in literal format ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __HAL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __HAL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + __LL_ADC_DECIMAL_NB_TO_CHANNEL((__DECIMAL_NB__)) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * ADC_CHANNEL_1, ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (ADC_CHANNEL_1, ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + */ +#define __HAL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE((__ADC_INSTANCE__), (__CHANNEL__)) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __HAL_ADC_COMMON_INSTANCE(__ADCx__) \ + __LL_ADC_COMMON_INSTANCE((__ADCx__)) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __HAL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE((__ADCXY_COMMON__)) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value + */ +#define __HAL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + __LL_ADC_DIGITAL_SCALE((__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __HAL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +__LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__),\ + (__ADC_RESOLUTION_CURRENT__),\ + (__ADC_RESOLUTION_TARGET__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__),\ + (__ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __HAL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_VREFANALOG_VOLTAGE((__VREFINT_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE((__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32G0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32G0, refer to device datasheet parameter "V30" (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_TYP_AVGSLOPE__),\ + (__TEMPSENSOR_TYP_CALX_V__),\ + (__TEMPSENSOR_CALX_TEMP__),\ + (__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include ADC HAL Extended module */ +#include "stm32g0xx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc); + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig); + +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h new file mode 100644 index 0000000..7df2395 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h @@ -0,0 +1,189 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc_ex.h + * @author MCD Application Team + * @brief Header file of ADC HAL extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_ADC_EX_H +#define STM32G0xx_HAL_ADC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADC Extended Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants + * @{ + */ + +/** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on all STM32 devices) */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Check whether or not ADC is independent. + * @param __HANDLE__ ADC handle. + * @note When multimode feature is not available, the macro always returns SET. + * @retval SET (ADC is independent) or RESET (ADC is not). + */ +#define ADC_IS_INDEPENDENT(__HANDLE__) (SET) + + +/** + * @brief Calibration factor size verification (7 bits maximum). + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large) + */ +#define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU)) + +/** + * @brief Verify the ADC oversampling ratio. + * @param __RATIO__ programmed ADC oversampling ratio. + * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid) + */ +#define IS_ADC_OVERSAMPLING_RATIO(__RATIO__) (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) + +/** + * @brief Verify the ADC oversampling shift. + * @param __SHIFT__ programmed ADC oversampling shift. + * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid) + */ +#define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__) (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_1 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_2 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_3 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_4 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_5 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_6 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_7 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_8 )) + +/** + * @brief Verify the ADC oversampling triggered mode. + * @param __MODE__ programmed ADC oversampling triggered mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ + ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ + +/* ADC calibration */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_ADC_EX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h new file mode 100644 index 0000000..c6062c4 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h @@ -0,0 +1,387 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CORTEX_H +#define STM32G0xx_HAL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. + */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +} MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) +#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions *************************************************/ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1U) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) > SysTick_IRQn) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CORTEX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h new file mode 100644 index 0000000..18634a5 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h @@ -0,0 +1,533 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac.h + * @author MCD Application Team + * @brief Header file of DAC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DAC_H +#define STM32G0xx_HAL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined(DAC1) + +/** @addtogroup DAC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Types DAC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */ + HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */ + HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */ + HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */ + HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */ + +} HAL_DAC_StateTypeDef; + +/** + * @brief DAC handle Structure definition + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +typedef struct __DAC_HandleTypeDef +#else +typedef struct +#endif +{ + DAC_TypeDef *Instance; /*!< Register base address */ + + __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ + + HAL_LockTypeDef Lock; /*!< DAC locking object */ + + DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ + + DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */ + + __IO uint32_t ErrorCode; /*!< DAC Error code */ + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ConvHalfCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ErrorCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* DMAUnderrunCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ConvCpltCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + void (* ConvHalfCpltCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + void (* ErrorCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + void (* DMAUnderrunCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + + void (* MspInitCallback)(struct __DAC_HandleTypeDef *hdac); + void (* MspDeInitCallback)(struct __DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +} DAC_HandleTypeDef; + +/** + * @brief DAC Configuration sample and hold Channel structure definition + */ +typedef struct +{ + uint32_t DAC_SampleTime ; /*!< Specifies the Sample time for the selected channel. + This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE. + This parameter must be a number between Min_Data = 0 and Max_Data = 1023 */ + + uint32_t DAC_HoldTime ; /*!< Specifies the hold time for the selected channel + This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE. + This parameter must be a number between Min_Data = 0 and Max_Data = 1023 */ + + uint32_t DAC_RefreshTime ; /*!< Specifies the refresh time for the selected channel + This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE. + This parameter must be a number between Min_Data = 0 and Max_Data = 255 */ +} DAC_SampleAndHoldConfTypeDef; + +/** + * @brief DAC Configuration regular Channel structure definition + */ +typedef struct +{ + uint32_t DAC_SampleAndHold; /*!< Specifies whether the DAC mode. + This parameter can be a value of @ref DAC_SampleAndHold */ + + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ + + uint32_t DAC_ConnectOnChipPeripheral ; /*!< Specifies whether the DAC output is connected or not to on chip peripheral . + This parameter can be a value of @ref DAC_ConnectOnChipPeripheral */ + + uint32_t DAC_UserTrimming; /*!< Specifies the trimming mode + This parameter must be a value of @ref DAC_UserTrimming + DAC_UserTrimming is either factory or user trimming */ + + uint32_t DAC_TrimmingValue; /*!< Specifies the offset trimming value + i.e. when DAC_SampleAndHold is DAC_TRIMMING_USER. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + DAC_SampleAndHoldConfTypeDef DAC_SampleAndHoldConfig; /*!< Sample and Hold settings */ + +} DAC_ChannelConfTypeDef; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DAC Callback ID enumeration definition + */ +typedef enum +{ + HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */ + HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */ + HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */ + HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */ + HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */ + HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */ + HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */ + HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */ + HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */ + HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */ + HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */ +} HAL_DAC_CallbackIDTypeDef; + +/** + * @brief HAL DAC Callback pointer definition + */ +typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_Error_Code DAC Error Code + * @{ + */ +#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */ +#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */ +#define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */ +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DAC_trigger_selection DAC trigger selection + * @{ + */ +#define DAC_TRIGGER_NONE 0x00000000U /*!< Conversion is automatic once the DAC_DHRxxxx register has been loaded, and not by external trigger */ +#define DAC_TRIGGER_SOFTWARE (DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ +#define DAC_TRIGGER_T1_TRGO (DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM1 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T2_TRGO (DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T3_TRGO (DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T6_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T7_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T15_TRGO (DAC_CR_TSEL1_3 | DAC_CR_TEN1) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_LPTIM1_OUT (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< LPTIM1_OUT selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_LPTIM2_OUT (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TEN1) /*!< LPTIM2_OUT selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_EXT_IT9 (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ + +/** + * @} + */ + +/** @defgroup DAC_output_buffer DAC output buffer + * @{ + */ +#define DAC_OUTPUTBUFFER_ENABLE 0x00000000U +#define DAC_OUTPUTBUFFER_DISABLE (DAC_MCR_MODE1_1) + +/** + * @} + */ + +/** @defgroup DAC_Channel_selection DAC Channel selection + * @{ + */ +#define DAC_CHANNEL_1 0x00000000U +#define DAC_CHANNEL_2 0x00000010U +/** + * @} + */ + +/** @defgroup DAC_data_alignment DAC data alignment + * @{ + */ +#define DAC_ALIGN_12B_R 0x00000000U +#define DAC_ALIGN_12B_L 0x00000004U +#define DAC_ALIGN_8B_R 0x00000008U + +/** + * @} + */ + +/** @defgroup DAC_flags_definition DAC flags definition + * @{ + */ +#define DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) +#define DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) + +/** + * @} + */ + +/** @defgroup DAC_IT_definition DAC IT definition + * @{ + */ +#define DAC_IT_DMAUDR1 (DAC_SR_DMAUDR1) +#define DAC_IT_DMAUDR2 (DAC_SR_DMAUDR2) + +/** + * @} + */ + +/** @defgroup DAC_ConnectOnChipPeripheral DAC ConnectOnChipPeripheral + * @{ + */ +#define DAC_CHIPCONNECT_DISABLE 0x00000000U +#define DAC_CHIPCONNECT_ENABLE (DAC_MCR_MODE1_0) + +/** + * @} + */ + +/** @defgroup DAC_UserTrimming DAC User Trimming + * @{ + */ +#define DAC_TRIMMING_FACTORY 0x00000000U /*!< Factory trimming */ +#define DAC_TRIMMING_USER 0x00000001U /*!< User trimming */ + +/** + * @} + */ +/** @defgroup DAC_SampleAndHold DAC power mode + * @{ + */ +#define DAC_SAMPLEANDHOLD_DISABLE 0x00000000U +#define DAC_SAMPLEANDHOLD_ENABLE (DAC_MCR_MODE1_2) + +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @brief Reset DAC handle state. + * @param __HANDLE__ specifies the DAC handle. + * @retval None + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_DAC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** @brief Enable the DAC channel. + * @param __HANDLE__ specifies the DAC handle. + * @param __DAC_Channel__ specifies the DAC channel + * @retval None + */ +#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) + +/** @brief Disable the DAC channel. + * @param __HANDLE__ specifies the DAC handle + * @param __DAC_Channel__ specifies the DAC channel. + * @retval None + */ +#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) + +/** @brief Set DHR12R1 alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008U + (__ALIGNMENT__)) + +/** @brief Set DHR12R2 alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014U + (__ALIGNMENT__)) + +/** @brief Set DHR12RD alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020U + (__ALIGNMENT__)) + +/** @brief Enable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) + +/** @brief Disable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) + +/** @brief Check whether the specified DAC interrupt source is enabled or not. + * @param __HANDLE__ DAC handle + * @param __INTERRUPT__ DAC interrupt source to check + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval State of interruption (SET or RESET) + */ +#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Get the selected DAC's flag status. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to get. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the DAC's flag. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to clear. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DAC_Private_Macros DAC Private Macros + * @{ + */ +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ + ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) + +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ + ((CHANNEL) == DAC_CHANNEL_2)) + +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ + ((ALIGN) == DAC_ALIGN_12B_L) || \ + ((ALIGN) == DAC_ALIGN_8B_R)) + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U) + +#define IS_DAC_REFRESHTIME(TIME) ((TIME) <= 0x000000FFU) + +/** + * @} + */ + +/* Include DAC HAL Extended module */ +#include "stm32g0xx_hal_dac_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, + uint32_t Alignment); +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel); + +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac); + +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); + +void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/* DAC callback registering/unregistering */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel); + +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac); +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Functions DAC Private Functions + * @{ + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /*STM32G0xx_HAL_DAC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h new file mode 100644 index 0000000..f54e1d4 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h @@ -0,0 +1,231 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac_ex.h + * @author MCD Application Team + * @brief Header file of DAC HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DAC_EX_H +#define STM32G0xx_HAL_DAC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined(DAC1) + +/** @addtogroup DACEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL State structures definition + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Constants DACEx Exported Constants + * @{ + */ + +/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude + * @{ + */ +#define DAC_LFSRUNMASK_BIT0 0x00000000U /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TRIANGLEAMPLITUDE_1 0x00000000U /*!< Select max triangle amplitude of 1 */ +#define DAC_TRIANGLEAMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */ +#define DAC_TRIANGLEAMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 7 */ +#define DAC_TRIANGLEAMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */ +#define DAC_TRIANGLEAMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Select max triangle amplitude of 31 */ +#define DAC_TRIANGLEAMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */ +#define DAC_TRIANGLEAMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 127 */ +#define DAC_TRIANGLEAMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */ +#define DAC_TRIANGLEAMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Select max triangle amplitude of 511 */ +#define DAC_TRIANGLEAMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TRIANGLEAMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TRIANGLEAMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DACEx_Private_Macros DACEx Private Macros + * @{ + */ +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ + ((TRIGGER) == DAC_TRIGGER_SOFTWARE) || \ + ((TRIGGER) == DAC_TRIGGER_T1_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_LPTIM1_OUT) || \ + ((TRIGGER) == DAC_TRIGGER_LPTIM2_OUT) || \ + ((TRIGGER) == DAC_TRIGGER_EXT_IT9)) + + +#define IS_DAC_SAMPLETIME(TIME) ((TIME) <= 0x000003FFU) + +#define IS_DAC_HOLDTIME(TIME) ((TIME) <= 0x000003FFU) + +#define IS_DAC_SAMPLEANDHOLD(MODE) (((MODE) == DAC_SAMPLEANDHOLD_DISABLE) || \ + ((MODE) == DAC_SAMPLEANDHOLD_ENABLE)) + +#define IS_DAC_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU) + +#define IS_DAC_NEWTRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU) + +#define IS_DAC_CHIP_CONNECTION(CONNECT) (((CONNECT) == DAC_CHIPCONNECT_DISABLE) || \ + ((CONNECT) == DAC_CHIPCONNECT_ENABLE)) + +#define IS_DAC_TRIMMING(TRIMMING) (((TRIMMING) == DAC_TRIMMING_FACTORY) || \ + ((TRIMMING) == DAC_TRIMMING_USER)) + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/* Extended features functions ***********************************************/ + +/** @addtogroup DACEx_Exported_Functions + * @{ + */ + +/** @addtogroup DACEx_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ + +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); + +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac); + +void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac); + + +/** + * @} + */ + +/** @addtogroup DACEx_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ + +HAL_StatusTypeDef HAL_DACEx_SelfCalibrate(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_DACEx_SetUserTrimming(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel, + uint32_t NewTrimmingValue); +uint32_t HAL_DACEx_GetTrimOffset(DAC_HandleTypeDef *hdac, uint32_t Channel); + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DACEx_Private_Functions + * @{ + */ + +/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */ +/* are called by HAL_DAC_Start_DMA */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*STM32G0xx_HAL_DAC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h new file mode 100644 index 0000000..aac7360 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h @@ -0,0 +1,214 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DEF +#define STM32G0xx_HAL_DEF + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +/** @brief Reset the Handles State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handles "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handles "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) +/* Reserved for future use */ +#error " USE_RTOS should be 0 in the current HAL release " +#else +#define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + +#define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +/* GNU Compiler */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined (__GNUC__) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4U))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +/* ARM Compiler */ +#if defined (__CC_ARM) /* ARM Compiler V5 */ +#define __ALIGN_BEGIN __align(4U) +/* IAR Compiler */ +#elif defined (__ICCARM__) +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DEF */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h new file mode 100644 index 0000000..8a88f89 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h @@ -0,0 +1,803 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DMA_H +#define STM32G0xx_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_dma.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified channel. + This parameter can be a value of @ref DMA_request */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +} HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + +#if defined(DMA2) + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + +#endif + uint32_t ChannelIndex; /*!< DMA Channel Index */ + + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ +#define HAL_DMA_ERROR_BUSY 0x00000080U /*!< DMA Busy error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */ + +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#define DMA_REQUEST_MEM2MEM LL_DMAMUX_REQ_MEM2MEM /*!< memory to memory transfer */ +#define DMA_REQUEST_GENERATOR0 LL_DMAMUX_REQ_GENERATOR0 /*!< DMAMUX request generator 0 */ +#define DMA_REQUEST_GENERATOR1 LL_DMAMUX_REQ_GENERATOR1 /*!< DMAMUX request generator 1 */ +#define DMA_REQUEST_GENERATOR2 LL_DMAMUX_REQ_GENERATOR2 /*!< DMAMUX request generator 2 */ +#define DMA_REQUEST_GENERATOR3 LL_DMAMUX_REQ_GENERATOR3 /*!< DMAMUX request generator 3 */ +#define DMA_REQUEST_ADC1 LL_DMAMUX_REQ_ADC1 /*!< DMAMUX ADC1 request */ +#if defined(AES) +#define DMA_REQUEST_AES_IN LL_DMAMUX_REQ_AES_IN /*!< DMAMUX AES_IN request */ +#define DMA_REQUEST_AES_OUT LL_DMAMUX_REQ_AES_OUT /*!< DMAMUX AES_OUT request */ +#endif +#if defined(DAC1) +#define DMA_REQUEST_DAC1_CH1 LL_DMAMUX_REQ_DAC1_CH1 /*!< DMAMUX DAC_CH1 request */ +#define DMA_REQUEST_DAC1_CH2 LL_DMAMUX_REQ_DAC1_CH2 /*!< DMAMUX DAC_CH2 request */ +#endif +#define DMA_REQUEST_I2C1_RX LL_DMAMUX_REQ_I2C1_RX /*!< DMAMUX I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX LL_DMAMUX_REQ_I2C1_TX /*!< DMAMUX I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX LL_DMAMUX_REQ_I2C2_RX /*!< DMAMUX I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX LL_DMAMUX_REQ_I2C2_TX /*!< DMAMUX I2C2 TX request */ +#if defined(LPUART1) +#define DMA_REQUEST_LPUART1_RX LL_DMAMUX_REQ_LPUART1_RX /*!< DMAMUX LPUART1 RX request */ +#define DMA_REQUEST_LPUART1_TX LL_DMAMUX_REQ_LPUART1_TX /*!< DMAMUX LPUART1 TX request */ +#endif +#define DMA_REQUEST_SPI1_RX LL_DMAMUX_REQ_SPI1_RX /*!< DMAMUX SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX LL_DMAMUX_REQ_SPI1_TX /*!< DMAMUX SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX LL_DMAMUX_REQ_SPI2_RX /*!< DMAMUX SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX LL_DMAMUX_REQ_SPI2_TX /*!< DMAMUX SPI2 TX request */ +#define DMA_REQUEST_TIM1_CH1 LL_DMAMUX_REQ_TIM1_CH1 /*!< DMAMUX TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 LL_DMAMUX_REQ_TIM1_CH2 /*!< DMAMUX TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 LL_DMAMUX_REQ_TIM1_CH3 /*!< DMAMUX TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 LL_DMAMUX_REQ_TIM1_CH4 /*!< DMAMUX TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_TRIG_COM LL_DMAMUX_REQ_TIM1_TRIG_COM /*!< DMAMUX TIM1 TRIG COM request */ +#define DMA_REQUEST_TIM1_UP LL_DMAMUX_REQ_TIM1_UP /*!< DMAMUX TIM1 UP request */ +#if defined(TIM2) +#define DMA_REQUEST_TIM2_CH1 LL_DMAMUX_REQ_TIM2_CH1 /*!< DMAMUX TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 LL_DMAMUX_REQ_TIM2_CH2 /*!< DMAMUX TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 LL_DMAMUX_REQ_TIM2_CH3 /*!< DMAMUX TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 LL_DMAMUX_REQ_TIM2_CH4 /*!< DMAMUX TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_TRIG LL_DMAMUX_REQ_TIM2_TRIG /*!< DMAMUX TIM2 TRIG request */ +#define DMA_REQUEST_TIM2_UP LL_DMAMUX_REQ_TIM2_UP /*!< DMAMUX TIM2 UP request */ +#endif +#define DMA_REQUEST_TIM3_CH1 LL_DMAMUX_REQ_TIM3_CH1 /*!< DMAMUX TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 LL_DMAMUX_REQ_TIM3_CH2 /*!< DMAMUX TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 LL_DMAMUX_REQ_TIM3_CH3 /*!< DMAMUX TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 LL_DMAMUX_REQ_TIM3_CH4 /*!< DMAMUX TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_TRIG LL_DMAMUX_REQ_TIM3_TRIG /*!< DMAMUX TIM3 TRIG request */ +#define DMA_REQUEST_TIM3_UP LL_DMAMUX_REQ_TIM3_UP /*!< DMAMUX TIM3 UP request */ +#if defined(TIM6) +#define DMA_REQUEST_TIM6_UP LL_DMAMUX_REQ_TIM6_UP /*!< DMAMUX TIM6 UP request */ +#endif +#if defined(TIM7) +#define DMA_REQUEST_TIM7_UP LL_DMAMUX_REQ_TIM7_UP /*!< DMAMUX TIM7 UP request */ +#endif +#if defined(TIM15) +#define DMA_REQUEST_TIM15_CH1 LL_DMAMUX_REQ_TIM15_CH1 /*!< DMAMUX TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_CH2 LL_DMAMUX_REQ_TIM15_CH2 /*!< DMAMUX TIM15 CH2 request */ +#define DMA_REQUEST_TIM15_TRIG_COM LL_DMAMUX_REQ_TIM15_TRIG_COM /*!< DMAMUX TIM15 TRIG COM request */ +#define DMA_REQUEST_TIM15_UP LL_DMAMUX_REQ_TIM15_UP /*!< DMAMUX TIM15 UP request */ +#endif +#define DMA_REQUEST_TIM16_CH1 LL_DMAMUX_REQ_TIM16_CH1 /*!< DMAMUX TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_COM LL_DMAMUX_REQ_TIM16_COM /*!< DMAMUX TIM16 COM request */ +#define DMA_REQUEST_TIM16_UP LL_DMAMUX_REQ_TIM16_UP /*!< DMAMUX TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 LL_DMAMUX_REQ_TIM17_CH1 /*!< DMAMUX TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_COM LL_DMAMUX_REQ_TIM17_COM /*!< DMAMUX TIM17 COM request */ +#define DMA_REQUEST_TIM17_UP LL_DMAMUX_REQ_TIM17_UP /*!< DMAMUX TIM17 UP request */ +#define DMA_REQUEST_USART1_RX LL_DMAMUX_REQ_USART1_RX /*!< DMAMUX USART1 RX request */ +#define DMA_REQUEST_USART1_TX LL_DMAMUX_REQ_USART1_TX /*!< DMAMUX USART1 TX request */ +#define DMA_REQUEST_USART2_RX LL_DMAMUX_REQ_USART2_RX /*!< DMAMUX USART2 RX request */ +#define DMA_REQUEST_USART2_TX LL_DMAMUX_REQ_USART2_TX /*!< DMAMUX USART2 TX request */ +#if defined(USART3) +#define DMA_REQUEST_USART3_RX LL_DMAMUX_REQ_USART3_RX /*!< DMAMUX USART3 RX request */ +#define DMA_REQUEST_USART3_TX LL_DMAMUX_REQ_USART3_TX /*!< DMAMUX USART3 TX request */ +#endif +#if defined(USART4) +#define DMA_REQUEST_USART4_RX LL_DMAMUX_REQ_USART4_RX /*!< DMAMUX USART4 RX request */ +#define DMA_REQUEST_USART4_TX LL_DMAMUX_REQ_USART4_TX /*!< DMAMUX USART4 TX request */ +#endif +#if defined(UCPD1) +#define DMA_REQUEST_UCPD1_RX LL_DMAMUX_REQ_UCPD1_RX /*!< DMAMUX UCPD1 RX request */ +#define DMA_REQUEST_UCPD1_TX LL_DMAMUX_REQ_UCPD1_TX /*!< DMAMUX UCPD1 TX request */ +#endif +#if defined(UCPD2) +#define DMA_REQUEST_UCPD2_RX LL_DMAMUX_REQ_UCPD2_RX /*!< DMAMUX UCPD2 RX request */ +#define DMA_REQUEST_UCPD2_TX LL_DMAMUX_REQ_UCPD2_TX /*!< DMAMUX UCPD2 TX request */ +#endif + +#if defined(I2C3) +#define DMA_REQUEST_I2C3_RX LL_DMAMUX_REQ_I2C3_RX /*!< DMAMUX I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX LL_DMAMUX_REQ_I2C3_TX /*!< DMAMUX I2C3 TX request */ +#endif + +#if defined(LPUART2) +#define DMA_REQUEST_LPUART2_RX LL_DMAMUX_REQ_LPUART2_RX /*!< DMAMUX LPUART2 RX request */ +#define DMA_REQUEST_LPUART2_TX LL_DMAMUX_REQ_LPUART2_TX /*!< DMAMUX LPUART2 TX request */ +#endif + +#if defined(SPI3) +#define DMA_REQUEST_SPI3_RX LL_DMAMUX_REQ_SPI3_RX /*!< DMAMUX SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX LL_DMAMUX_REQ_SPI3_TX /*!< DMAMUX SPI3 TX request */ +#endif + +#if defined(TIM4) +#define DMA_REQUEST_TIM4_CH1 LL_DMAMUX_REQ_TIM4_CH1 /*!< DMAMUX TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 LL_DMAMUX_REQ_TIM4_CH2 /*!< DMAMUX TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 LL_DMAMUX_REQ_TIM4_CH3 /*!< DMAMUX TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_CH4 LL_DMAMUX_REQ_TIM4_CH4 /*!< DMAMUX TIM4 CH4 request */ +#define DMA_REQUEST_TIM4_TRIG LL_DMAMUX_REQ_TIM4_TRIG /*!< DMAMUX TIM4 TRIG request */ +#define DMA_REQUEST_TIM4_UP LL_DMAMUX_REQ_TIM4_UP /*!< DMAMUX TIM4 UP request */ +#endif + +#if defined(USART5) +#define DMA_REQUEST_USART5_RX LL_DMAMUX_REQ_USART5_RX /*!< DMAMUX USART5 RX request */ +#define DMA_REQUEST_USART5_TX LL_DMAMUX_REQ_USART5_TX /*!< DMAMUX USART5 TX request */ +#endif + +#if defined(USART6) +#define DMA_REQUEST_USART6_RX LL_DMAMUX_REQ_USART6_RX /*!< DMAMUX USART6 RX request */ +#define DMA_REQUEST_USART6_TX LL_DMAMUX_REQ_USART6_TX /*!< DMAMUX USART6 TX request */ +#endif + + +#define DMA_MAX_REQUEST LL_DMAMUX_MAX_REQ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY LL_DMA_DIRECTION_PERIPH_TO_MEMORY /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH LL_DMA_DIRECTION_MEMORY_TO_PERIPH /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY LL_DMA_DIRECTION_MEMORY_TO_MEMORY /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE LL_DMA_PERIPH_INCREMENT /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE LL_DMA_PERIPH_NOINCREMENT /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE LL_DMA_MEMORY_INCREMENT /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE LL_DMA_MEMORY_NOINCREMENT /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE LL_DMA_PDATAALIGN_BYTE /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD LL_DMA_PDATAALIGN_HALFWORD /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD LL_DMA_PDATAALIGN_WORD /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE LL_DMA_MDATAALIGN_BYTE /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD LL_DMA_MDATAALIGN_HALFWORD /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD LL_DMA_MDATAALIGN_WORD /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL LL_DMA_MODE_NORMAL /*!< Normal mode */ +#define DMA_CIRCULAR LL_DMA_MODE_CIRCULAR /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW LL_DMA_PRIORITY_LOW /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM LL_DMA_PRIORITY_MEDIUM /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH LL_DMA_PRIORITY_HIGH /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH LL_DMA_PRIORITY_VERYHIGH /*!< Priority level : Very_High */ +/** + * @} + */ + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC DMA_CCR_TCIE /*!< Transfer Complete interrupt */ +#define DMA_IT_HT DMA_CCR_HTIE /*!< Half Transfer Complete interrupt */ +#define DMA_IT_TE DMA_CCR_TEIE /*!< Transfer Error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ + +#define DMA_FLAG_GI1 DMA_ISR_GIF1 /*!< Global Interrupt flag for Channel 1 */ +#define DMA_FLAG_TC1 DMA_ISR_TCIF1 /*!< Transfer Complete flag for Channel 1 */ +#define DMA_FLAG_HT1 DMA_ISR_HTIF1 /*!< Half Transfer flag for Channel 1 */ +#define DMA_FLAG_TE1 DMA_ISR_TEIF1 /*!< Transfer Error flag for Channel 1 */ +#define DMA_FLAG_GI2 DMA_ISR_GIF2 /*!< Global Interrupt flag for Channel 2 */ +#define DMA_FLAG_TC2 DMA_ISR_TCIF2 /*!< Transfer Complete flag for Channel 2 */ +#define DMA_FLAG_HT2 DMA_ISR_HTIF2 /*!< Half Transfer flag for Channel 2 */ +#define DMA_FLAG_TE2 DMA_ISR_TEIF2 /*!< Transfer Error flag for Channel 2 */ +#define DMA_FLAG_GI3 DMA_ISR_GIF3 /*!< Global Interrupt flag for Channel 3 */ +#define DMA_FLAG_TC3 DMA_ISR_TCIF3 /*!< Transfer Complete flag for Channel 3 */ +#define DMA_FLAG_HT3 DMA_ISR_HTIF3 /*!< Half Transfer flag for Channel 3 */ +#define DMA_FLAG_TE3 DMA_ISR_TEIF3 /*!< Transfer Error flag for Channel 3 */ +#define DMA_FLAG_GI4 DMA_ISR_GIF4 /*!< Global Interrupt flag for Channel 4 */ +#define DMA_FLAG_TC4 DMA_ISR_TCIF4 /*!< Transfer Complete flag for Channel 4 */ +#define DMA_FLAG_HT4 DMA_ISR_HTIF4 /*!< Half Transfer flag for Channel 4 */ +#define DMA_FLAG_TE4 DMA_ISR_TEIF4 /*!< Transfer Error flag for Channel 4 */ +#define DMA_FLAG_GI5 DMA_ISR_GIF5 /*!< Global Interrupt flag for Channel 5 */ +#define DMA_FLAG_TC5 DMA_ISR_TCIF5 /*!< Transfer Complete flag for Channel 5 */ +#define DMA_FLAG_HT5 DMA_ISR_HTIF5 /*!< Half Transfer flag for Channel 5 */ +#define DMA_FLAG_TE5 DMA_ISR_TEIF5 /*!< Transfer Error for Channel 5 */ +#if defined(DMA1_Channel6) +#define DMA_FLAG_GI6 DMA_ISR_GIF6 /*!< Global Interrupt flag for Channel 6 */ +#define DMA_FLAG_TC6 DMA_ISR_TCIF6 /*!< Transfer Complete flag for Channel 6 */ +#define DMA_FLAG_HT6 DMA_ISR_HTIF6 /*!< Half Transfer flag for Channel 6 */ +#define DMA_FLAG_TE6 DMA_ISR_TEIF6 /*!< Transfer Error flag for Channel 6 */ +#endif +#if defined(DMA1_Channel7) +#define DMA_FLAG_GI7 DMA_ISR_GIF7 /*!< Global Interrupt flag for Channel 7 */ +#define DMA_FLAG_TC7 DMA_ISR_TCIF7 /*!< Transfer Complete flag for Channel 7 */ +#define DMA_FLAG_HT7 DMA_ISR_HTIF7 /*!< Half Transfer flag for Channel 7 */ +#define DMA_FLAG_TE7 DMA_ISR_TEIF7 /*!< Transfer Error flag for Channel 7 */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) +#else +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) +#endif +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) +#else +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) +#endif +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) +#else +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) +#endif +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\ + DMA_FLAG_GI7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\ + DMA_FLAG_GI7) +#else +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + DMA_FLAG_GI5) +#endif +#endif /* DMA2 */ + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GIx: Global interrupt flag + * Where x can be 1 to max Channel supported by the product to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ +#if defined(DMA2) +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) +#else /* DMA1 */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) +#endif /* DMA2 */ + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GIx: Global interrupt flag + * Where x can be 1 to max Channel supported by the product to select the DMA Channel flag. + * @retval None + */ +#if defined(DMA2) +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) +#else /* DMA1 */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR |= (__FLAG__)) +#endif /* DMA2 */ + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or disabled. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Returns the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__ DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32g0xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < DMA_CNDTR_NDT)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_ALL_REQUEST(REQUEST) ((REQUEST) <= DMA_MAX_REQUEST) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h new file mode 100644 index 0000000..7e5e0ce --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h @@ -0,0 +1,280 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DMA_EX_H +#define STM32G0xx_HAL_DMA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_dmamux.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @{ + */ + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE */ + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + + +} HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + +} HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ + +/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_EXTI0 LL_DMAMUX_SYNC_EXTI_LINE0 /*!< Synchronization signal from EXTI Line0 */ +#define HAL_DMAMUX1_SYNC_EXTI1 LL_DMAMUX_SYNC_EXTI_LINE1 /*!< Synchronization signal from EXTI Line1 */ +#define HAL_DMAMUX1_SYNC_EXTI2 LL_DMAMUX_SYNC_EXTI_LINE2 /*!< Synchronization signal from EXTI Line2 */ +#define HAL_DMAMUX1_SYNC_EXTI3 LL_DMAMUX_SYNC_EXTI_LINE3 /*!< Synchronization signal from EXTI Line3 */ +#define HAL_DMAMUX1_SYNC_EXTI4 LL_DMAMUX_SYNC_EXTI_LINE4 /*!< Synchronization signal from EXTI Line4 */ +#define HAL_DMAMUX1_SYNC_EXTI5 LL_DMAMUX_SYNC_EXTI_LINE5 /*!< Synchronization signal from EXTI Line5 */ +#define HAL_DMAMUX1_SYNC_EXTI6 LL_DMAMUX_SYNC_EXTI_LINE6 /*!< Synchronization signal from EXTI Line6 */ +#define HAL_DMAMUX1_SYNC_EXTI7 LL_DMAMUX_SYNC_EXTI_LINE7 /*!< Synchronization signal from EXTI Line7 */ +#define HAL_DMAMUX1_SYNC_EXTI8 LL_DMAMUX_SYNC_EXTI_LINE8 /*!< Synchronization signal from EXTI Line8 */ +#define HAL_DMAMUX1_SYNC_EXTI9 LL_DMAMUX_SYNC_EXTI_LINE9 /*!< Synchronization signal from EXTI Line9 */ +#define HAL_DMAMUX1_SYNC_EXTI10 LL_DMAMUX_SYNC_EXTI_LINE10 /*!< Synchronization signal from EXTI Line10 */ +#define HAL_DMAMUX1_SYNC_EXTI11 LL_DMAMUX_SYNC_EXTI_LINE11 /*!< Synchronization signal from EXTI Line11 */ +#define HAL_DMAMUX1_SYNC_EXTI12 LL_DMAMUX_SYNC_EXTI_LINE12 /*!< Synchronization signal from EXTI Line12 */ +#define HAL_DMAMUX1_SYNC_EXTI13 LL_DMAMUX_SYNC_EXTI_LINE13 /*!< Synchronization signal from EXTI Line1 3 */ +#define HAL_DMAMUX1_SYNC_EXTI14 LL_DMAMUX_SYNC_EXTI_LINE14 /*!< Synchronization signal from EXTI Line1 4 */ +#define HAL_DMAMUX1_SYNC_EXTI15 LL_DMAMUX_SYNC_EXTI_LINE15 /*!< Synchronization signal from EXTI Line1 5 */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT LL_DMAMUX_SYNC_DMAMUX_CH0 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT LL_DMAMUX_SYNC_DMAMUX_CH1 /*!< Synchronization signal from DMAMUX channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT LL_DMAMUX_SYNC_DMAMUX_CH2 /*!< Synchronization signal from DMAMUX channel2 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT LL_DMAMUX_SYNC_DMAMUX_CH3 /*!< Synchronization signal from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define HAL_DMAMUX1_SYNC_LPTIM1_OUT LL_DMAMUX_SYNC_LPTIM1_OUT /*!< Synchronization signal from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define HAL_DMAMUX1_SYNC_LPTIM2_OUT LL_DMAMUX_SYNC_LPTIM2_OUT /*!< Synchronization signal from LPTIM2 Output */ +#endif +#define HAL_DMAMUX1_SYNC_TIM14_OC LL_DMAMUX_SYNC_TIM14_OC /*!< Synchronization signal from TIM14 OC */ + +#define HAL_DMAMUX1_MAX_SYNC HAL_DMAMUX1_SYNC_TIM14_OC +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT LL_DMAMUX_SYNC_NO_EVENT /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING LL_DMAMUX_SYNC_POL_RISING /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING LL_DMAMUX_SYNC_POL_FALLING /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING LL_DMAMUX_SYNC_POL_RISING_FALLING /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection + * @{ + */ +#define HAL_DMAMUX1_REQ_GEN_EXTI0 LL_DMAMUX_REQ_GEN_EXTI_LINE0 /*!< Request signal generation from EXTI Line0 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI1 LL_DMAMUX_REQ_GEN_EXTI_LINE1 /*!< Request signal generation from EXTI Line1 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI2 LL_DMAMUX_REQ_GEN_EXTI_LINE2 /*!< Request signal generation from EXTI Line2 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI3 LL_DMAMUX_REQ_GEN_EXTI_LINE3 /*!< Request signal generation from EXTI Line3 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI4 LL_DMAMUX_REQ_GEN_EXTI_LINE4 /*!< Request signal generation from EXTI Line4 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI5 LL_DMAMUX_REQ_GEN_EXTI_LINE5 /*!< Request signal generation from EXTI Line5 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI6 LL_DMAMUX_REQ_GEN_EXTI_LINE6 /*!< Request signal generation from EXTI Line6 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI7 LL_DMAMUX_REQ_GEN_EXTI_LINE7 /*!< Request signal generation from EXTI Line7 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI8 LL_DMAMUX_REQ_GEN_EXTI_LINE8 /*!< Request signal generation from EXTI Line8 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI9 LL_DMAMUX_REQ_GEN_EXTI_LINE9 /*!< Request signal generation from EXTI Line9 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI10 LL_DMAMUX_REQ_GEN_EXTI_LINE10 /*!< Request signal generation from EXTI Line10 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI11 LL_DMAMUX_REQ_GEN_EXTI_LINE11 /*!< Request signal generation from EXTI Line11 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI12 LL_DMAMUX_REQ_GEN_EXTI_LINE12 /*!< Request signal generation from EXTI Line12 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI13 LL_DMAMUX_REQ_GEN_EXTI_LINE13 /*!< Request signal generation from EXTI Line13 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI14 LL_DMAMUX_REQ_GEN_EXTI_LINE14 /*!< Request signal generation from EXTI Line14 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI15 LL_DMAMUX_REQ_GEN_EXTI_LINE15 /*!< Request signal generation from EXTI Line15 */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH0 /*!< Request signal generation from DMAMUX channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH1 /*!< Request signal generation from DMAMUX channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH2 /*!< Request signal generation from DMAMUX channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH3 /*!< Request signal generation from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT LL_DMAMUX_REQ_GEN_LPTIM1_OUT /*!< Request signal generation from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT LL_DMAMUX_REQ_GEN_LPTIM2_OUT /*!< Request signal generation from LPTIM2 Output */ +#endif +#define HAL_DMAMUX1_REQ_GEN_TIM14_OC LL_DMAMUX_REQ_GEN_TIM14_OC /*!< Request signal generation from TIM14 OC */ + +#define HAL_DMAMUX1_MAX_REQ_GEN HAL_DMAMUX1_REQ_GEN_TIM14_OC +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT LL_DMAMUX_REQ_GEN_NO_EVENT /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING LL_DMAMUX_REQ_GEN_POL_RISING /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING LL_DMAMUX_REQ_GEN_POL_FALLING /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING LL_DMAMUX_REQ_GEN_POL_RISING_FALLING /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup DMAEx_Exported_Functions_Group1 + * @{ + */ + +/* ------------------------- REQUEST -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +/* -------------------------------------------------------------------------- */ + +/* ------------------------- SYNCHRO -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +/* -------------------------------------------------------------------------- */ + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMAEx Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_SYNC_EXTI0) || \ + (((SIGNAL_ID) >= HAL_DMAMUX1_SYNC_EXTI1) && \ + ((SIGNAL_ID) <= HAL_DMAMUX1_MAX_SYNC))) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_REQ_GEN_EXTI0) || \ + (((SIGNAL_ID) >= HAL_DMAMUX1_REQ_GEN_EXTI1) && \ + ((SIGNAL_ID) <= HAL_DMAMUX1_MAX_REQ_GEN))) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT)|| \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DMA_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h new file mode 100644 index 0000000..dbf24f5 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h @@ -0,0 +1,389 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_EXTI_H +#define STM32G0xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, + HAL_EXTI_RISING_CB_ID = 0x01U, + HAL_EXTI_FALLING_CB_ID = 0x02U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* RisingCallback)(void); /*!< Exti rising callback */ + void (* FallingCallback)(void); /*!< Exti falling callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | 0x10u) +#if defined(COMP1) +#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_REG1 | 0x11u) +#else +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#endif +#if defined(COMP2) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | 0x12u) +#else +#define EXTI_LINE_18 (EXTI_RESERVED | EXTI_REG1 | 0x12u) +#endif +#define EXTI_LINE_19 (EXTI_DIRECT | EXTI_REG1 | 0x13u) +#if defined(COMP3) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | 0x14u) +#else +#define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14u) +#endif +#define EXTI_LINE_21 (EXTI_DIRECT | EXTI_REG1 | 0x15u) +#if defined(RCC_CCIPR_I2C2SEL) +#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_REG1 | 0x16u) +#else +#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u) +#endif +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | 0x17u) +#if defined(RCC_CCIPR_USART3SEL) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | 0x18u) +#else +#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u) +#endif +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19u) +#if defined(RCC_CCIPR_USART2SEL) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | 0x1Au) +#else +#define EXTI_LINE_26 (EXTI_RESERVED | EXTI_REG1 | 0x1Au) +#endif +#if defined(CEC) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | 0x1Bu) +#else +#define EXTI_LINE_27 (EXTI_RESERVED | EXTI_REG1 | 0x1Bu) +#endif +#if defined(LPUART1) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | 0x1Cu) +#else +#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu) +#endif +#if defined(LPTIM1) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | 0x1Du) +#else +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#endif +#if defined(LPTIM2) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | 0x1Eu) +#else +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#endif +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | 0x1Fu) +#if defined(UCPD1) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | 0x00u) +#else +#define EXTI_LINE_32 (EXTI_RESERVED | EXTI_REG2 | 0x00u) +#endif +#if defined(UCPD2) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | 0x01u) +#else +#define EXTI_LINE_33 (EXTI_RESERVED | EXTI_REG2 | 0x01u) +#endif +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | 0x02u) +#else +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#endif +#if defined(LPUART2) +#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_REG2 | 0x03u) +#else +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#endif +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_REG2 | 0x04u) +#endif +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#define EXTI_GPIOD 0x00000003u +#if defined(GPIOE) +#define EXTI_GPIOE 0x00000004u +#endif +#define EXTI_GPIOF 0x00000005u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16u +#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2) +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define EXTI_LINE_NB 37uL +#elif defined(STM32G0B0xx) +#define EXTI_LINE_NB 37uL +#elif defined(STM32G081xx) || defined(STM32G071xx) +#define EXTI_LINE_NB 34uL +#elif defined(STM32G070xx) +#define EXTI_LINE_NB 34uL +#elif defined(STM32G041xx) || defined(STM32G031xx) +#define EXTI_LINE_NB 32uL +#else +#define EXTI_LINE_NB 32uL +#endif + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u)))) + +#define IS_EXTI_MODE(__MODE__) ((((__MODE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__MODE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \ + ((__EXTI_LINE__) == EXTI_TRIGGER_FALLING)) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined(GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOF)) +#endif + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_EXTI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h new file mode 100644 index 0000000..24c12f8 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h @@ -0,0 +1,1438 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_fdcan.h + * @author MCD Application Team + * @brief Header file of FDCAN HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FDCAN_H +#define STM32G0xx_HAL_FDCAN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined(FDCAN1) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FDCAN + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Types FDCAN Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_FDCAN_STATE_RESET = 0x00U, /*!< FDCAN not yet initialized or disabled */ + HAL_FDCAN_STATE_READY = 0x01U, /*!< FDCAN initialized and ready for use */ + HAL_FDCAN_STATE_BUSY = 0x02U, /*!< FDCAN process is ongoing */ + HAL_FDCAN_STATE_ERROR = 0x03U /*!< FDCAN error state */ +} HAL_FDCAN_StateTypeDef; + +/** + * @brief FDCAN Init structure definition + */ +typedef struct +{ + uint32_t ClockDivider; /*!< Specifies the FDCAN kernel clock divider. + The clock is common to all FDCAN instances. + This parameter is applied only at initialisation of + first FDCAN instance. + This parameter can be a value of @ref FDCAN_clock_divider. */ + + uint32_t FrameFormat; /*!< Specifies the FDCAN frame format. + This parameter can be a value of @ref FDCAN_frame_format */ + + uint32_t Mode; /*!< Specifies the FDCAN mode. + This parameter can be a value of @ref FDCAN_operating_mode */ + + FunctionalState AutoRetransmission; /*!< Enable or disable the automatic retransmission mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState TransmitPause; /*!< Enable or disable the Transmit Pause feature. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ProtocolException; /*!< Enable or disable the Protocol Exception Handling. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t NominalPrescaler; /*!< Specifies the value by which the oscillator frequency is + divided for generating the nominal bit time quanta. + This parameter must be a number between 1 and 512 */ + + uint32_t NominalSyncJumpWidth; /*!< Specifies the maximum number of time quanta the FDCAN + hardware is allowed to lengthen or shorten a bit to perform + resynchronization. + This parameter must be a number between 1 and 128 */ + + uint32_t NominalTimeSeg1; /*!< Specifies the number of time quanta in Bit Segment 1. + This parameter must be a number between 2 and 256 */ + + uint32_t NominalTimeSeg2; /*!< Specifies the number of time quanta in Bit Segment 2. + This parameter must be a number between 2 and 128 */ + + uint32_t DataPrescaler; /*!< Specifies the value by which the oscillator frequency is + divided for generating the data bit time quanta. + This parameter must be a number between 1 and 32 */ + + uint32_t DataSyncJumpWidth; /*!< Specifies the maximum number of time quanta the FDCAN + hardware is allowed to lengthen or shorten a data bit to + perform resynchronization. + This parameter must be a number between 1 and 16 */ + + uint32_t DataTimeSeg1; /*!< Specifies the number of time quanta in Data Bit Segment 1. + This parameter must be a number between 1 and 32 */ + + uint32_t DataTimeSeg2; /*!< Specifies the number of time quanta in Data Bit Segment 2. + This parameter must be a number between 1 and 16 */ + + uint32_t StdFiltersNbr; /*!< Specifies the number of standard Message ID filters. + This parameter must be a number between 0 and 28 */ + + uint32_t ExtFiltersNbr; /*!< Specifies the number of extended Message ID filters. + This parameter must be a number between 0 and 8 */ + + uint32_t TxFifoQueueMode; /*!< Tx FIFO/Queue Mode selection. + This parameter can be a value of @ref FDCAN_txFifoQueue_Mode */ + +} FDCAN_InitTypeDef; + +/** + * @brief FDCAN filter structure definition + */ +typedef struct +{ + uint32_t IdType; /*!< Specifies the identifier type. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t FilterIndex; /*!< Specifies the filter which will be initialized. + This parameter must be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if IdType is FDCAN_STANDARD_ID + - 0 and (SRAMCAN_FLE_NBR-1), if IdType is FDCAN_EXTENDED_ID */ + + uint32_t FilterType; /*!< Specifies the filter type. + This parameter can be a value of @ref FDCAN_filter_type. + The value FDCAN_FILTER_RANGE_NO_EIDM is permitted + only when IdType is FDCAN_EXTENDED_ID. */ + + uint32_t FilterConfig; /*!< Specifies the filter configuration. + This parameter can be a value of @ref FDCAN_filter_config */ + + uint32_t FilterID1; /*!< Specifies the filter identification 1. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t FilterID2; /*!< Specifies the filter identification 2. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + +} FDCAN_FilterTypeDef; + +/** + * @brief FDCAN Tx header structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type for the message that will be + transmitted. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t TxFrameType; /*!< Specifies the frame type of the message that will be transmitted. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the length of the frame that will be transmitted. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Tx frame will be transmitted with or without + bit rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Tx frame will be transmitted in classic or + FD format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t TxEventFifoControl; /*!< Specifies the event FIFO control. + This parameter can be a value of @ref FDCAN_EFC */ + + uint32_t MessageMarker; /*!< Specifies the message marker to be copied into Tx Event FIFO + element for identification of Tx message status. + This parameter must be a number between 0 and 0xFF */ + +} FDCAN_TxHeaderTypeDef; + +/** + * @brief FDCAN Rx header structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type of the received message. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t RxFrameType; /*!< Specifies the the received message frame type. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the received frame length. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Rx frame is received with or without bit + rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Rx frame is received in classic or FD + format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t RxTimestamp; /*!< Specifies the timestamp counter value captured on start of frame + reception. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FilterIndex; /*!< Specifies the index of matching Rx acceptance filter element. + This parameter must be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if IdType is FDCAN_STANDARD_ID + - 0 and (SRAMCAN_FLE_NBR-1), if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IsFilterMatchingFrame; /*!< Specifies whether the accepted frame did not match any Rx filter. + Acceptance of non-matching frames may be enabled via + HAL_FDCAN_ConfigGlobalFilter(). + This parameter can be 0 or 1 */ + +} FDCAN_RxHeaderTypeDef; + +/** + * @brief FDCAN Tx event FIFO structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type for the transmitted message. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t TxFrameType; /*!< Specifies the frame type of the transmitted message. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the length of the transmitted frame. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Tx frame is transmitted with or without bit + rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Tx frame is transmitted in classic or FD + format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t TxTimestamp; /*!< Specifies the timestamp counter value captured on start of frame + transmission. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t MessageMarker; /*!< Specifies the message marker copied into Tx Event FIFO element + for identification of Tx message status. + This parameter must be a number between 0 and 0xFF */ + + uint32_t EventType; /*!< Specifies the event type. + This parameter can be a value of @ref FDCAN_event_type */ + +} FDCAN_TxEventFifoTypeDef; + +/** + * @brief FDCAN High Priority Message Status structure definition + */ +typedef struct +{ + uint32_t FilterList; /*!< Specifies the filter list of the matching filter element. + This parameter can be: + - 0 : Standard Filter List + - 1 : Extended Filter List */ + + uint32_t FilterIndex; /*!< Specifies the index of matching filter element. + This parameter can be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if FilterList is 0 (Standard) + - 0 and (SRAMCAN_FLE_NBR-1), if FilterList is 1 (Extended) */ + + uint32_t MessageStorage; /*!< Specifies the HP Message Storage. + This parameter can be a value of @ref FDCAN_hp_msg_storage */ + + uint32_t MessageIndex; /*!< Specifies the Index of Rx FIFO element to which the + message was stored. + This parameter is valid only when MessageStorage is: + FDCAN_HP_STORAGE_RXFIFO0 + or + FDCAN_HP_STORAGE_RXFIFO1 */ + +} FDCAN_HpMsgStatusTypeDef; + +/** + * @brief FDCAN Protocol Status structure definition + */ +typedef struct +{ + uint32_t LastErrorCode; /*!< Specifies the type of the last error that occurred on the FDCAN bus. + This parameter can be a value of @ref FDCAN_protocol_error_code */ + + uint32_t DataLastErrorCode; /*!< Specifies the type of the last error that occurred in the data phase of a CAN FD format + frame with its BRS flag set. + This parameter can be a value of @ref FDCAN_protocol_error_code */ + + uint32_t Activity; /*!< Specifies the FDCAN module communication state. + This parameter can be a value of @ref FDCAN_communication_state */ + + uint32_t ErrorPassive; /*!< Specifies the FDCAN module error status. + This parameter can be: + - 0 : The FDCAN is in Error_Active state + - 1 : The FDCAN is in Error_Passive state */ + + uint32_t Warning; /*!< Specifies the FDCAN module warning status. + This parameter can be: + - 0 : error counters (RxErrorCnt and TxErrorCnt) are below the Error_Warning limit of 96 + - 1 : at least one of error counters has reached the Error_Warning limit of 96 */ + + uint32_t BusOff; /*!< Specifies the FDCAN module Bus_Off status. + This parameter can be: + - 0 : The FDCAN is not in Bus_Off state + - 1 : The FDCAN is in Bus_Off state */ + + uint32_t RxESIflag; /*!< Specifies ESI flag of last received CAN FD message. + This parameter can be: + - 0 : Last received CAN FD message did not have its ESI flag set + - 1 : Last received CAN FD message had its ESI flag set */ + + uint32_t RxBRSflag; /*!< Specifies BRS flag of last received CAN FD message. + This parameter can be: + - 0 : Last received CAN FD message did not have its BRS flag set + - 1 : Last received CAN FD message had its BRS flag set */ + + uint32_t RxFDFflag; /*!< Specifies if CAN FD message (FDF flag set) has been received since last protocol status + This parameter can be: + - 0 : No CAN FD message received + - 1 : CAN FD message received */ + + uint32_t ProtocolException; /*!< Specifies the FDCAN module Protocol Exception status. + This parameter can be: + - 0 : No protocol exception event occurred since last read access + - 1 : Protocol exception event occurred */ + + uint32_t TDCvalue; /*!< Specifies the Transmitter Delay Compensation Value. + This parameter can be a number between 0 and 127 */ + +} FDCAN_ProtocolStatusTypeDef; + +/** + * @brief FDCAN Error Counters structure definition + */ +typedef struct +{ + uint32_t TxErrorCnt; /*!< Specifies the Transmit Error Counter Value. + This parameter can be a number between 0 and 255 */ + + uint32_t RxErrorCnt; /*!< Specifies the Receive Error Counter Value. + This parameter can be a number between 0 and 127 */ + + uint32_t RxErrorPassive; /*!< Specifies the Receive Error Passive status. + This parameter can be: + - 0 : The Receive Error Counter (RxErrorCnt) is below the error passive level of 128 + - 1 : The Receive Error Counter (RxErrorCnt) has reached the error passive level of 128 */ + + uint32_t ErrorLogging; /*!< Specifies the Transmit/Receive error logging counter value. + This parameter can be a number between 0 and 255. + This counter is incremented each time when a FDCAN protocol error causes the TxErrorCnt + or the RxErrorCnt to be incremented. The counter stops at 255; the next increment of + TxErrorCnt or RxErrorCnt sets interrupt flag FDCAN_FLAG_ERROR_LOGGING_OVERFLOW */ + +} FDCAN_ErrorCountersTypeDef; + +/** + * @brief FDCAN Message RAM blocks + */ +typedef struct +{ + uint32_t StandardFilterSA; /*!< Specifies the Standard Filter List Start Address. + This parameter must be a 32-bit word address */ + + uint32_t ExtendedFilterSA; /*!< Specifies the Extended Filter List Start Address. + This parameter must be a 32-bit word address */ + + uint32_t RxFIFO0SA; /*!< Specifies the Rx FIFO 0 Start Address. + This parameter must be a 32-bit word address */ + + uint32_t RxFIFO1SA; /*!< Specifies the Rx FIFO 1 Start Address. + This parameter must be a 32-bit word address */ + + uint32_t TxEventFIFOSA; /*!< Specifies the Tx Event FIFO Start Address. + This parameter must be a 32-bit word address */ + + uint32_t TxFIFOQSA; /*!< Specifies the Tx FIFO/Queue Start Address. + This parameter must be a 32-bit word address */ + +} FDCAN_MsgRamAddressTypeDef; + +/** + * @brief FDCAN handle structure definition + */ +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +typedef struct __FDCAN_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +{ + FDCAN_GlobalTypeDef *Instance; /*!< Register base address */ + + FDCAN_InitTypeDef Init; /*!< FDCAN required parameters */ + + FDCAN_MsgRamAddressTypeDef msgRam; /*!< FDCAN Message RAM blocks */ + + uint32_t LatestTxFifoQRequest; /*!< FDCAN Tx buffer index + of latest Tx FIFO/Queue request */ + + __IO HAL_FDCAN_StateTypeDef State; /*!< FDCAN communication state */ + + HAL_LockTypeDef Lock; /*!< FDCAN locking object */ + + __IO uint32_t ErrorCode; /*!< FDCAN Error code */ + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + void (* TxEventFifoCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); /*!< FDCAN Tx Event Fifo callback */ + void (* RxFifo0Callback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); /*!< FDCAN Rx Fifo 0 callback */ + void (* RxFifo1Callback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); /*!< FDCAN Rx Fifo 1 callback */ + void (* TxFifoEmptyCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Tx Fifo Empty callback */ + void (* TxBufferCompleteCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< FDCAN Tx Buffer complete callback */ + void (* TxBufferAbortCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< FDCAN Tx Buffer abort callback */ + void (* HighPriorityMessageCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN High priority message callback */ + void (* TimestampWraparoundCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Timestamp wraparound callback */ + void (* TimeoutOccurredCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Timeout occurred callback */ + void (* ErrorCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Error callback */ + void (* ErrorStatusCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); /*!< FDCAN Error status callback */ + + void (* MspInitCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Msp Init callback */ + void (* MspDeInitCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Msp DeInit callback */ + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +} FDCAN_HandleTypeDef; + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/** + * @brief HAL FDCAN common Callback ID enumeration definition + */ +typedef enum +{ + HAL_FDCAN_TX_FIFO_EMPTY_CB_ID = 0x00U, /*!< FDCAN Tx Fifo Empty callback ID */ + HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID = 0x01U, /*!< FDCAN High priority message callback ID */ + HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID = 0x02U, /*!< FDCAN Timestamp wraparound callback ID */ + HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID = 0x03U, /*!< FDCAN Timeout occurred callback ID */ + HAL_FDCAN_ERROR_CALLBACK_CB_ID = 0x04U, /*!< FDCAN Error callback ID */ + + HAL_FDCAN_MSPINIT_CB_ID = 0x05U, /*!< FDCAN MspInit callback ID */ + HAL_FDCAN_MSPDEINIT_CB_ID = 0x06U, /*!< FDCAN MspDeInit callback ID */ + +} HAL_FDCAN_CallbackIDTypeDef; + +/** + * @brief HAL FDCAN Callback pointer definition + */ +typedef void (*pFDCAN_CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan); /*!< pointer to a common FDCAN callback function */ +typedef void (*pFDCAN_TxEventFifoCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); /*!< pointer to Tx event Fifo FDCAN callback function */ +typedef void (*pFDCAN_RxFifo0CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); /*!< pointer to Rx Fifo 0 FDCAN callback function */ +typedef void (*pFDCAN_RxFifo1CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); /*!< pointer to Rx Fifo 1 FDCAN callback function */ +typedef void (*pFDCAN_TxBufferCompleteCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< pointer to Tx Buffer complete FDCAN callback function */ +typedef void (*pFDCAN_TxBufferAbortCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< pointer to Tx Buffer abort FDCAN callback function */ +typedef void (*pFDCAN_ErrorStatusCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); /*!< pointer to Error Status callback function */ + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Constants FDCAN Exported Constants + * @{ + */ + +/** @defgroup HAL_FDCAN_Error_Code HAL FDCAN Error Code + * @{ + */ +#define HAL_FDCAN_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_FDCAN_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */ +#define HAL_FDCAN_ERROR_NOT_INITIALIZED ((uint32_t)0x00000002U) /*!< Peripheral not initialized */ +#define HAL_FDCAN_ERROR_NOT_READY ((uint32_t)0x00000004U) /*!< Peripheral not ready */ +#define HAL_FDCAN_ERROR_NOT_STARTED ((uint32_t)0x00000008U) /*!< Peripheral not started */ +#define HAL_FDCAN_ERROR_NOT_SUPPORTED ((uint32_t)0x00000010U) /*!< Mode not supported */ +#define HAL_FDCAN_ERROR_PARAM ((uint32_t)0x00000020U) /*!< Parameter error */ +#define HAL_FDCAN_ERROR_PENDING ((uint32_t)0x00000040U) /*!< Pending operation */ +#define HAL_FDCAN_ERROR_RAM_ACCESS ((uint32_t)0x00000080U) /*!< Message RAM Access Failure */ +#define HAL_FDCAN_ERROR_FIFO_EMPTY ((uint32_t)0x00000100U) /*!< Put element in full FIFO */ +#define HAL_FDCAN_ERROR_FIFO_FULL ((uint32_t)0x00000200U) /*!< Get element from empty FIFO */ +#define HAL_FDCAN_ERROR_LOG_OVERFLOW FDCAN_IR_ELO /*!< Overflow of CAN Error Logging Counter */ +#define HAL_FDCAN_ERROR_RAM_WDG FDCAN_IR_WDI /*!< Message RAM Watchdog event occurred */ +#define HAL_FDCAN_ERROR_PROTOCOL_ARBT FDCAN_IR_PEA /*!< Protocol Error in Arbitration Phase (Nominal Bit Time is used) */ +#define HAL_FDCAN_ERROR_PROTOCOL_DATA FDCAN_IR_PED /*!< Protocol Error in Data Phase (Data Bit Time is used) */ +#define HAL_FDCAN_ERROR_RESERVED_AREA FDCAN_IR_ARA /*!< Access to Reserved Address */ + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +#define HAL_FDCAN_ERROR_INVALID_CALLBACK ((uint32_t)0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup FDCAN_frame_format FDCAN Frame Format + * @{ + */ +#define FDCAN_FRAME_CLASSIC ((uint32_t)0x00000000U) /*!< Classic mode */ +#define FDCAN_FRAME_FD_NO_BRS ((uint32_t)FDCAN_CCCR_FDOE) /*!< FD mode without BitRate Switching */ +#define FDCAN_FRAME_FD_BRS ((uint32_t)(FDCAN_CCCR_FDOE | FDCAN_CCCR_BRSE)) /*!< FD mode with BitRate Switching */ +/** + * @} + */ + +/** @defgroup FDCAN_operating_mode FDCAN Operating Mode + * @{ + */ +#define FDCAN_MODE_NORMAL ((uint32_t)0x00000000U) /*!< Normal mode */ +#define FDCAN_MODE_RESTRICTED_OPERATION ((uint32_t)0x00000001U) /*!< Restricted Operation mode */ +#define FDCAN_MODE_BUS_MONITORING ((uint32_t)0x00000002U) /*!< Bus Monitoring mode */ +#define FDCAN_MODE_INTERNAL_LOOPBACK ((uint32_t)0x00000003U) /*!< Internal LoopBack mode */ +#define FDCAN_MODE_EXTERNAL_LOOPBACK ((uint32_t)0x00000004U) /*!< External LoopBack mode */ +/** + * @} + */ + +/** @defgroup FDCAN_clock_divider FDCAN Clock Divider + * @{ + */ +#define FDCAN_CLOCK_DIV1 ((uint32_t)0x00000000U) /*!< Divide kernel clock by 1 */ +#define FDCAN_CLOCK_DIV2 ((uint32_t)0x00000001U) /*!< Divide kernel clock by 2 */ +#define FDCAN_CLOCK_DIV4 ((uint32_t)0x00000002U) /*!< Divide kernel clock by 4 */ +#define FDCAN_CLOCK_DIV6 ((uint32_t)0x00000003U) /*!< Divide kernel clock by 6 */ +#define FDCAN_CLOCK_DIV8 ((uint32_t)0x00000004U) /*!< Divide kernel clock by 8 */ +#define FDCAN_CLOCK_DIV10 ((uint32_t)0x00000005U) /*!< Divide kernel clock by 10 */ +#define FDCAN_CLOCK_DIV12 ((uint32_t)0x00000006U) /*!< Divide kernel clock by 12 */ +#define FDCAN_CLOCK_DIV14 ((uint32_t)0x00000007U) /*!< Divide kernel clock by 14 */ +#define FDCAN_CLOCK_DIV16 ((uint32_t)0x00000008U) /*!< Divide kernel clock by 16 */ +#define FDCAN_CLOCK_DIV18 ((uint32_t)0x00000009U) /*!< Divide kernel clock by 18 */ +#define FDCAN_CLOCK_DIV20 ((uint32_t)0x0000000AU) /*!< Divide kernel clock by 20 */ +#define FDCAN_CLOCK_DIV22 ((uint32_t)0x0000000BU) /*!< Divide kernel clock by 22 */ +#define FDCAN_CLOCK_DIV24 ((uint32_t)0x0000000CU) /*!< Divide kernel clock by 24 */ +#define FDCAN_CLOCK_DIV26 ((uint32_t)0x0000000DU) /*!< Divide kernel clock by 26 */ +#define FDCAN_CLOCK_DIV28 ((uint32_t)0x0000000EU) /*!< Divide kernel clock by 28 */ +#define FDCAN_CLOCK_DIV30 ((uint32_t)0x0000000FU) /*!< Divide kernel clock by 30 */ +/** + * @} + */ + +/** @defgroup FDCAN_txFifoQueue_Mode FDCAN Tx FIFO/Queue Mode + * @{ + */ +#define FDCAN_TX_FIFO_OPERATION ((uint32_t)0x00000000U) /*!< FIFO mode */ +#define FDCAN_TX_QUEUE_OPERATION ((uint32_t)FDCAN_TXBC_TFQM) /*!< Queue mode */ +/** + * @} + */ + +/** @defgroup FDCAN_id_type FDCAN ID Type + * @{ + */ +#define FDCAN_STANDARD_ID ((uint32_t)0x00000000U) /*!< Standard ID element */ +#define FDCAN_EXTENDED_ID ((uint32_t)0x40000000U) /*!< Extended ID element */ +/** + * @} + */ + +/** @defgroup FDCAN_frame_type FDCAN Frame Type + * @{ + */ +#define FDCAN_DATA_FRAME ((uint32_t)0x00000000U) /*!< Data frame */ +#define FDCAN_REMOTE_FRAME ((uint32_t)0x20000000U) /*!< Remote frame */ +/** + * @} + */ + +/** @defgroup FDCAN_data_length_code FDCAN Data Length Code + * @{ + */ +#define FDCAN_DLC_BYTES_0 ((uint32_t)0x00000000U) /*!< 0 bytes data field */ +#define FDCAN_DLC_BYTES_1 ((uint32_t)0x00010000U) /*!< 1 bytes data field */ +#define FDCAN_DLC_BYTES_2 ((uint32_t)0x00020000U) /*!< 2 bytes data field */ +#define FDCAN_DLC_BYTES_3 ((uint32_t)0x00030000U) /*!< 3 bytes data field */ +#define FDCAN_DLC_BYTES_4 ((uint32_t)0x00040000U) /*!< 4 bytes data field */ +#define FDCAN_DLC_BYTES_5 ((uint32_t)0x00050000U) /*!< 5 bytes data field */ +#define FDCAN_DLC_BYTES_6 ((uint32_t)0x00060000U) /*!< 6 bytes data field */ +#define FDCAN_DLC_BYTES_7 ((uint32_t)0x00070000U) /*!< 7 bytes data field */ +#define FDCAN_DLC_BYTES_8 ((uint32_t)0x00080000U) /*!< 8 bytes data field */ +#define FDCAN_DLC_BYTES_12 ((uint32_t)0x00090000U) /*!< 12 bytes data field */ +#define FDCAN_DLC_BYTES_16 ((uint32_t)0x000A0000U) /*!< 16 bytes data field */ +#define FDCAN_DLC_BYTES_20 ((uint32_t)0x000B0000U) /*!< 20 bytes data field */ +#define FDCAN_DLC_BYTES_24 ((uint32_t)0x000C0000U) /*!< 24 bytes data field */ +#define FDCAN_DLC_BYTES_32 ((uint32_t)0x000D0000U) /*!< 32 bytes data field */ +#define FDCAN_DLC_BYTES_48 ((uint32_t)0x000E0000U) /*!< 48 bytes data field */ +#define FDCAN_DLC_BYTES_64 ((uint32_t)0x000F0000U) /*!< 64 bytes data field */ +/** + * @} + */ + +/** @defgroup FDCAN_error_state_indicator FDCAN Error State Indicator + * @{ + */ +#define FDCAN_ESI_ACTIVE ((uint32_t)0x00000000U) /*!< Transmitting node is error active */ +#define FDCAN_ESI_PASSIVE ((uint32_t)0x80000000U) /*!< Transmitting node is error passive */ +/** + * @} + */ + +/** @defgroup FDCAN_bit_rate_switching FDCAN Bit Rate Switching + * @{ + */ +#define FDCAN_BRS_OFF ((uint32_t)0x00000000U) /*!< FDCAN frames transmitted/received without bit rate switching */ +#define FDCAN_BRS_ON ((uint32_t)0x00100000U) /*!< FDCAN frames transmitted/received with bit rate switching */ +/** + * @} + */ + +/** @defgroup FDCAN_format FDCAN format + * @{ + */ +#define FDCAN_CLASSIC_CAN ((uint32_t)0x00000000U) /*!< Frame transmitted/received in Classic CAN format */ +#define FDCAN_FD_CAN ((uint32_t)0x00200000U) /*!< Frame transmitted/received in FDCAN format */ +/** + * @} + */ + +/** @defgroup FDCAN_EFC FDCAN Event FIFO control + * @{ + */ +#define FDCAN_NO_TX_EVENTS ((uint32_t)0x00000000U) /*!< Do not store Tx events */ +#define FDCAN_STORE_TX_EVENTS ((uint32_t)0x00800000U) /*!< Store Tx events */ +/** + * @} + */ + +/** @defgroup FDCAN_filter_type FDCAN Filter Type + * @{ + */ +#define FDCAN_FILTER_RANGE ((uint32_t)0x00000000U) /*!< Range filter from FilterID1 to FilterID2 */ +#define FDCAN_FILTER_DUAL ((uint32_t)0x00000001U) /*!< Dual ID filter for FilterID1 or FilterID2 */ +#define FDCAN_FILTER_MASK ((uint32_t)0x00000002U) /*!< Classic filter: FilterID1 = filter, FilterID2 = mask */ +#define FDCAN_FILTER_RANGE_NO_EIDM ((uint32_t)0x00000003U) /*!< Range filter from FilterID1 to FilterID2, EIDM mask not applied */ +/** + * @} + */ + +/** @defgroup FDCAN_filter_config FDCAN Filter Configuration + * @{ + */ +#define FDCAN_FILTER_DISABLE ((uint32_t)0x00000000U) /*!< Disable filter element */ +#define FDCAN_FILTER_TO_RXFIFO0 ((uint32_t)0x00000001U) /*!< Store in Rx FIFO 0 if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO1 ((uint32_t)0x00000002U) /*!< Store in Rx FIFO 1 if filter matches */ +#define FDCAN_FILTER_REJECT ((uint32_t)0x00000003U) /*!< Reject ID if filter matches */ +#define FDCAN_FILTER_HP ((uint32_t)0x00000004U) /*!< Set high priority if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO0_HP ((uint32_t)0x00000005U) /*!< Set high priority and store in FIFO 0 if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO1_HP ((uint32_t)0x00000006U) /*!< Set high priority and store in FIFO 1 if filter matches */ +/** + * @} + */ + +/** @defgroup FDCAN_Tx_location FDCAN Tx Location + * @{ + */ +#define FDCAN_TX_BUFFER0 ((uint32_t)0x00000001U) /*!< Add message to Tx Buffer 0 */ +#define FDCAN_TX_BUFFER1 ((uint32_t)0x00000002U) /*!< Add message to Tx Buffer 1 */ +#define FDCAN_TX_BUFFER2 ((uint32_t)0x00000004U) /*!< Add message to Tx Buffer 2 */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_location FDCAN Rx Location + * @{ + */ +#define FDCAN_RX_FIFO0 ((uint32_t)0x00000040U) /*!< Get received message from Rx FIFO 0 */ +#define FDCAN_RX_FIFO1 ((uint32_t)0x00000041U) /*!< Get received message from Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_event_type FDCAN Event Type + * @{ + */ +#define FDCAN_TX_EVENT ((uint32_t)0x00400000U) /*!< Tx event */ +#define FDCAN_TX_IN_SPITE_OF_ABORT ((uint32_t)0x00800000U) /*!< Transmission in spite of cancellation */ +/** + * @} + */ + +/** @defgroup FDCAN_hp_msg_storage FDCAN High Priority Message Storage + * @{ + */ +#define FDCAN_HP_STORAGE_NO_FIFO ((uint32_t)0x00000000U) /*!< No FIFO selected */ +#define FDCAN_HP_STORAGE_MSG_LOST ((uint32_t)0x00000040U) /*!< FIFO message lost */ +#define FDCAN_HP_STORAGE_RXFIFO0 ((uint32_t)0x00000080U) /*!< Message stored in FIFO 0 */ +#define FDCAN_HP_STORAGE_RXFIFO1 ((uint32_t)0x000000C0U) /*!< Message stored in FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_protocol_error_code FDCAN protocol error code + * @{ + */ +#define FDCAN_PROTOCOL_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error occurred */ +#define FDCAN_PROTOCOL_ERROR_STUFF ((uint32_t)0x00000001U) /*!< Stuff error */ +#define FDCAN_PROTOCOL_ERROR_FORM ((uint32_t)0x00000002U) /*!< Form error */ +#define FDCAN_PROTOCOL_ERROR_ACK ((uint32_t)0x00000003U) /*!< Acknowledge error */ +#define FDCAN_PROTOCOL_ERROR_BIT1 ((uint32_t)0x00000004U) /*!< Bit 1 (recessive) error */ +#define FDCAN_PROTOCOL_ERROR_BIT0 ((uint32_t)0x00000005U) /*!< Bit 0 (dominant) error */ +#define FDCAN_PROTOCOL_ERROR_CRC ((uint32_t)0x00000006U) /*!< CRC check sum error */ +#define FDCAN_PROTOCOL_ERROR_NO_CHANGE ((uint32_t)0x00000007U) /*!< No change since last read */ +/** + * @} + */ + +/** @defgroup FDCAN_communication_state FDCAN communication state + * @{ + */ +#define FDCAN_COM_STATE_SYNC ((uint32_t)0x00000000U) /*!< Node is synchronizing on CAN communication */ +#define FDCAN_COM_STATE_IDLE ((uint32_t)0x00000008U) /*!< Node is neither receiver nor transmitter */ +#define FDCAN_COM_STATE_RX ((uint32_t)0x00000010U) /*!< Node is operating as receiver */ +#define FDCAN_COM_STATE_TX ((uint32_t)0x00000018U) /*!< Node is operating as transmitter */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_FIFO_operation_mode FDCAN FIFO operation mode + * @{ + */ +#define FDCAN_RX_FIFO_BLOCKING ((uint32_t)0x00000000U) /*!< Rx FIFO blocking mode */ +#define FDCAN_RX_FIFO_OVERWRITE ((uint32_t)0x00000001U) /*!< Rx FIFO overwrite mode */ +/** + * @} + */ + +/** @defgroup FDCAN_Non_Matching_Frames FDCAN non-matching frames + * @{ + */ +#define FDCAN_ACCEPT_IN_RX_FIFO0 ((uint32_t)0x00000000U) /*!< Accept in Rx FIFO 0 */ +#define FDCAN_ACCEPT_IN_RX_FIFO1 ((uint32_t)0x00000001U) /*!< Accept in Rx FIFO 1 */ +#define FDCAN_REJECT ((uint32_t)0x00000002U) /*!< Reject */ +/** + * @} + */ + +/** @defgroup FDCAN_Reject_Remote_Frames FDCAN reject remote frames + * @{ + */ +#define FDCAN_FILTER_REMOTE ((uint32_t)0x00000000U) /*!< Filter remote frames */ +#define FDCAN_REJECT_REMOTE ((uint32_t)0x00000001U) /*!< Reject all remote frames */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupt_Line FDCAN interrupt line + * @{ + */ +#define FDCAN_INTERRUPT_LINE0 ((uint32_t)0x00000001U) /*!< Interrupt Line 0 */ +#define FDCAN_INTERRUPT_LINE1 ((uint32_t)0x00000002U) /*!< Interrupt Line 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_Timestamp FDCAN timestamp + * @{ + */ +#define FDCAN_TIMESTAMP_INTERNAL ((uint32_t)0x00000001U) /*!< Timestamp counter value incremented according to TCP */ +#define FDCAN_TIMESTAMP_EXTERNAL ((uint32_t)0x00000002U) /*!< External timestamp counter value used */ +/** + * @} + */ + +/** @defgroup FDCAN_Timestamp_Prescaler FDCAN timestamp prescaler + * @{ + */ +#define FDCAN_TIMESTAMP_PRESC_1 ((uint32_t)0x00000000U) /*!< Timestamp counter time unit in equal to CAN bit time */ +#define FDCAN_TIMESTAMP_PRESC_2 ((uint32_t)0x00010000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 2 */ +#define FDCAN_TIMESTAMP_PRESC_3 ((uint32_t)0x00020000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 3 */ +#define FDCAN_TIMESTAMP_PRESC_4 ((uint32_t)0x00030000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 4 */ +#define FDCAN_TIMESTAMP_PRESC_5 ((uint32_t)0x00040000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 5 */ +#define FDCAN_TIMESTAMP_PRESC_6 ((uint32_t)0x00050000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 6 */ +#define FDCAN_TIMESTAMP_PRESC_7 ((uint32_t)0x00060000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 7 */ +#define FDCAN_TIMESTAMP_PRESC_8 ((uint32_t)0x00070000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 8 */ +#define FDCAN_TIMESTAMP_PRESC_9 ((uint32_t)0x00080000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 9 */ +#define FDCAN_TIMESTAMP_PRESC_10 ((uint32_t)0x00090000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 10 */ +#define FDCAN_TIMESTAMP_PRESC_11 ((uint32_t)0x000A0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 11 */ +#define FDCAN_TIMESTAMP_PRESC_12 ((uint32_t)0x000B0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 12 */ +#define FDCAN_TIMESTAMP_PRESC_13 ((uint32_t)0x000C0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 13 */ +#define FDCAN_TIMESTAMP_PRESC_14 ((uint32_t)0x000D0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 14 */ +#define FDCAN_TIMESTAMP_PRESC_15 ((uint32_t)0x000E0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 15 */ +#define FDCAN_TIMESTAMP_PRESC_16 ((uint32_t)0x000F0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 16 */ +/** + * @} + */ + +/** @defgroup FDCAN_Timeout_Operation FDCAN timeout operation + * @{ + */ +#define FDCAN_TIMEOUT_CONTINUOUS ((uint32_t)0x00000000U) /*!< Timeout continuous operation */ +#define FDCAN_TIMEOUT_TX_EVENT_FIFO ((uint32_t)0x00000002U) /*!< Timeout controlled by Tx Event FIFO */ +#define FDCAN_TIMEOUT_RX_FIFO0 ((uint32_t)0x00000004U) /*!< Timeout controlled by Rx FIFO 0 */ +#define FDCAN_TIMEOUT_RX_FIFO1 ((uint32_t)0x00000006U) /*!< Timeout controlled by Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup Interrupt_Masks Interrupt masks + * @{ + */ +#define FDCAN_IR_MASK ((uint32_t)0x00FFFFFFU) /*!< FDCAN interrupts mask */ +#define FDCAN_ILS_MASK ((uint32_t)0x0000007FU) /*!< FDCAN interrupts group mask */ +/** + * @} + */ + +/** @defgroup FDCAN_flags FDCAN Flags + * @{ + */ +#define FDCAN_FLAG_TX_COMPLETE FDCAN_IR_TC /*!< Transmission Completed */ +#define FDCAN_FLAG_TX_ABORT_COMPLETE FDCAN_IR_TCF /*!< Transmission Cancellation Finished */ +#define FDCAN_FLAG_TX_FIFO_EMPTY FDCAN_IR_TFE /*!< Tx FIFO Empty */ +#define FDCAN_FLAG_RX_HIGH_PRIORITY_MSG FDCAN_IR_HPM /*!< High priority message received */ +#define FDCAN_FLAG_TX_EVT_FIFO_ELT_LOST FDCAN_IR_TEFL /*!< Tx Event FIFO element lost */ +#define FDCAN_FLAG_TX_EVT_FIFO_FULL FDCAN_IR_TEFF /*!< Tx Event FIFO full */ +#define FDCAN_FLAG_TX_EVT_FIFO_NEW_DATA FDCAN_IR_TEFN /*!< Tx Handler wrote Tx Event FIFO element */ +#define FDCAN_FLAG_RX_FIFO0_MESSAGE_LOST FDCAN_IR_RF0L /*!< Rx FIFO 0 message lost */ +#define FDCAN_FLAG_RX_FIFO0_FULL FDCAN_IR_RF0F /*!< Rx FIFO 0 full */ +#define FDCAN_FLAG_RX_FIFO0_NEW_MESSAGE FDCAN_IR_RF0N /*!< New message written to Rx FIFO 0 */ +#define FDCAN_FLAG_RX_FIFO1_MESSAGE_LOST FDCAN_IR_RF1L /*!< Rx FIFO 1 message lost */ +#define FDCAN_FLAG_RX_FIFO1_FULL FDCAN_IR_RF1F /*!< Rx FIFO 1 full */ +#define FDCAN_FLAG_RX_FIFO1_NEW_MESSAGE FDCAN_IR_RF1N /*!< New message written to Rx FIFO 1 */ +#define FDCAN_FLAG_RAM_ACCESS_FAILURE FDCAN_IR_MRAF /*!< Message RAM access failure occurred */ +#define FDCAN_FLAG_ERROR_LOGGING_OVERFLOW FDCAN_IR_ELO /*!< Overflow of FDCAN Error Logging Counter occurred */ +#define FDCAN_FLAG_ERROR_PASSIVE FDCAN_IR_EP /*!< Error_Passive status changed */ +#define FDCAN_FLAG_ERROR_WARNING FDCAN_IR_EW /*!< Error_Warning status changed */ +#define FDCAN_FLAG_BUS_OFF FDCAN_IR_BO /*!< Bus_Off status changed */ +#define FDCAN_FLAG_RAM_WATCHDOG FDCAN_IR_WDI /*!< Message RAM Watchdog event due to missing READY */ +#define FDCAN_FLAG_ARB_PROTOCOL_ERROR FDCAN_IR_PEA /*!< Protocol error in arbitration phase detected */ +#define FDCAN_FLAG_DATA_PROTOCOL_ERROR FDCAN_IR_PED /*!< Protocol error in data phase detected */ +#define FDCAN_FLAG_RESERVED_ADDRESS_ACCESS FDCAN_IR_ARA /*!< Access to reserved address occurred */ +#define FDCAN_FLAG_TIMESTAMP_WRAPAROUND FDCAN_IR_TSW /*!< Timestamp counter wrapped around */ +#define FDCAN_FLAG_TIMEOUT_OCCURRED FDCAN_IR_TOO /*!< Timeout reached */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts FDCAN Interrupts + * @{ + */ + +/** @defgroup FDCAN_Tx_Interrupts FDCAN Tx Interrupts + * @{ + */ +#define FDCAN_IT_TX_COMPLETE FDCAN_IE_TCE /*!< Transmission Completed */ +#define FDCAN_IT_TX_ABORT_COMPLETE FDCAN_IE_TCFE /*!< Transmission Cancellation Finished */ +#define FDCAN_IT_TX_FIFO_EMPTY FDCAN_IE_TFEE /*!< Tx FIFO Empty */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Interrupts FDCAN Rx Interrupts + * @{ + */ +#define FDCAN_IT_RX_HIGH_PRIORITY_MSG FDCAN_IE_HPME /*!< High priority message received */ +/** + * @} + */ + +/** @defgroup FDCAN_Counter_Interrupts FDCAN Counter Interrupts + * @{ + */ +#define FDCAN_IT_TIMESTAMP_WRAPAROUND FDCAN_IE_TSWE /*!< Timestamp counter wrapped around */ +#define FDCAN_IT_TIMEOUT_OCCURRED FDCAN_IE_TOOE /*!< Timeout reached */ +/** + * @} + */ + +/** @defgroup FDCAN_Tx_Event_Fifo_Interrupts FDCAN Tx Event FIFO Interrupts + * @{ + */ +#define FDCAN_IT_TX_EVT_FIFO_ELT_LOST FDCAN_IE_TEFLE /*!< Tx Event FIFO element lost */ +#define FDCAN_IT_TX_EVT_FIFO_FULL FDCAN_IE_TEFFE /*!< Tx Event FIFO full */ +#define FDCAN_IT_TX_EVT_FIFO_NEW_DATA FDCAN_IE_TEFNE /*!< Tx Handler wrote Tx Event FIFO element */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Fifo0_Interrupts FDCAN Rx FIFO 0 Interrupts + * @{ + */ +#define FDCAN_IT_RX_FIFO0_MESSAGE_LOST FDCAN_IE_RF0LE /*!< Rx FIFO 0 message lost */ +#define FDCAN_IT_RX_FIFO0_FULL FDCAN_IE_RF0FE /*!< Rx FIFO 0 full */ +#define FDCAN_IT_RX_FIFO0_NEW_MESSAGE FDCAN_IE_RF0NE /*!< New message written to Rx FIFO 0 */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Fifo1_Interrupts FDCAN Rx FIFO 1 Interrupts + * @{ + */ +#define FDCAN_IT_RX_FIFO1_MESSAGE_LOST FDCAN_IE_RF1LE /*!< Rx FIFO 1 message lost */ +#define FDCAN_IT_RX_FIFO1_FULL FDCAN_IE_RF1FE /*!< Rx FIFO 1 full */ +#define FDCAN_IT_RX_FIFO1_NEW_MESSAGE FDCAN_IE_RF1NE /*!< New message written to Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_Error_Interrupts FDCAN Error Interrupts + * @{ + */ +#define FDCAN_IT_RAM_ACCESS_FAILURE FDCAN_IE_MRAFE /*!< Message RAM access failure occurred */ +#define FDCAN_IT_ERROR_LOGGING_OVERFLOW FDCAN_IE_ELOE /*!< Overflow of FDCAN Error Logging Counter occurred */ +#define FDCAN_IT_RAM_WATCHDOG FDCAN_IE_WDIE /*!< Message RAM Watchdog event due to missing READY */ +#define FDCAN_IT_ARB_PROTOCOL_ERROR FDCAN_IE_PEAE /*!< Protocol error in arbitration phase detected */ +#define FDCAN_IT_DATA_PROTOCOL_ERROR FDCAN_IE_PEDE /*!< Protocol error in data phase detected */ +#define FDCAN_IT_RESERVED_ADDRESS_ACCESS FDCAN_IE_ARAE /*!< Access to reserved address occurred */ +/** + * @} + */ + +/** @defgroup FDCAN_Error_Status_Interrupts FDCAN Error Status Interrupts + * @{ + */ +#define FDCAN_IT_ERROR_PASSIVE FDCAN_IE_EPE /*!< Error_Passive status changed */ +#define FDCAN_IT_ERROR_WARNING FDCAN_IE_EWE /*!< Error_Warning status changed */ +#define FDCAN_IT_BUS_OFF FDCAN_IE_BOE /*!< Bus_Off status changed */ +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts_List FDCAN Interrupts List + * @{ + */ +#define FDCAN_IT_LIST_RX_FIFO0 (FDCAN_IT_RX_FIFO0_MESSAGE_LOST | \ + FDCAN_IT_RX_FIFO0_FULL | \ + FDCAN_IT_RX_FIFO0_NEW_MESSAGE) /*!< RX FIFO 0 Interrupts List */ +#define FDCAN_IT_LIST_RX_FIFO1 (FDCAN_IT_RX_FIFO1_MESSAGE_LOST | \ + FDCAN_IT_RX_FIFO1_FULL | \ + FDCAN_IT_RX_FIFO1_NEW_MESSAGE) /*!< RX FIFO 1 Interrupts List */ +#define FDCAN_IT_LIST_SMSG (FDCAN_IT_TX_ABORT_COMPLETE | \ + FDCAN_IT_TX_COMPLETE | \ + FDCAN_IT_RX_HIGH_PRIORITY_MSG) /*!< Status Message Interrupts List */ +#define FDCAN_IT_LIST_TX_FIFO_ERROR (FDCAN_IT_TX_EVT_FIFO_ELT_LOST | \ + FDCAN_IT_TX_EVT_FIFO_FULL | \ + FDCAN_IT_TX_EVT_FIFO_NEW_DATA | \ + FDCAN_IT_TX_FIFO_EMPTY) /*!< TX FIFO Error Interrupts List */ +#define FDCAN_IT_LIST_MISC (FDCAN_IT_TIMEOUT_OCCURRED | \ + FDCAN_IT_RAM_ACCESS_FAILURE | \ + FDCAN_IT_TIMESTAMP_WRAPAROUND) /*!< Misc. Interrupts List */ +#define FDCAN_IT_LIST_BIT_LINE_ERROR (FDCAN_IT_ERROR_PASSIVE | \ + FDCAN_IT_ERROR_LOGGING_OVERFLOW) /*!< Bit and Line Error Interrupts List */ +#define FDCAN_IT_LIST_PROTOCOL_ERROR (FDCAN_IT_RESERVED_ADDRESS_ACCESS | \ + FDCAN_IT_DATA_PROTOCOL_ERROR | \ + FDCAN_IT_ARB_PROTOCOL_ERROR | \ + FDCAN_IT_RAM_WATCHDOG | \ + FDCAN_IT_BUS_OFF | \ + FDCAN_IT_ERROR_WARNING) /*!< Protocol Error Interrupts List */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts_Group FDCAN Interrupts Group + * @{ + */ +#define FDCAN_IT_GROUP_RX_FIFO0 FDCAN_ILS_RXFIFO0 /*!< RX FIFO 0 Interrupts Group: + RF0LL: Rx FIFO 0 Message Lost + RF0FL: Rx FIFO 0 is Full + RF0NL: Rx FIFO 0 Has New Message */ +#define FDCAN_IT_GROUP_RX_FIFO1 FDCAN_ILS_RXFIFO1 /*!< RX FIFO 1 Interrupts Group: + RF1LL: Rx FIFO 1 Message Lost + RF1FL: Rx FIFO 1 is Full + RF1NL: Rx FIFO 1 Has New Message */ +#define FDCAN_IT_GROUP_SMSG FDCAN_ILS_SMSG /*!< Status Message Interrupts Group: + TCFL: Transmission Cancellation Finished + TCL: Transmission Completed + HPML: High Priority Message */ +#define FDCAN_IT_GROUP_TX_FIFO_ERROR FDCAN_ILS_TFERR /*!< TX FIFO Error Interrupts Group: + TEFLL: Tx Event FIFO Element Lost + TEFFL: Tx Event FIFO Full + TEFNL: Tx Event FIFO New Entry + TFEL: Tx FIFO Empty Interrupt Line */ +#define FDCAN_IT_GROUP_MISC FDCAN_ILS_MISC /*!< Misc. Interrupts Group: + TOOL: Timeout Occurred + MRAFL: Message RAM Access Failure + TSWL: Timestamp Wraparound */ +#define FDCAN_IT_GROUP_BIT_LINE_ERROR FDCAN_ILS_BERR /*!< Bit and Line Error Interrupts Group: + EPL: Error Passive + ELOL: Error Logging Overflow */ +#define FDCAN_IT_GROUP_PROTOCOL_ERROR FDCAN_ILS_PERR /*!< Protocol Error Group: + ARAL: Access to Reserved Address Line + PEDL: Protocol Error in Data Phase Line + PEAL: Protocol Error in Arbitration Phase Line + WDIL: Watchdog Interrupt Line + BOL: Bus_Off Status + EWL: Warning Status */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Macros FDCAN Exported Macros + * @{ + */ + +/** @brief Reset FDCAN handle state. + * @param __HANDLE__ FDCAN handle. + * @retval None + */ +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +#define __HAL_FDCAN_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_FDCAN_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_FDCAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FDCAN_STATE_RESET) +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @brief Enable the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (__HANDLE__)->Instance->IE |= (__INTERRUPT__) + +/** + * @brief Disable the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->IE) &= ~(__INTERRUPT__) + +/** + * @brief Check whether the specified FDCAN interrupt is set or not. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be one of @arg FDCAN_Interrupts + * @retval ITStatus + */ +#define __HAL_FDCAN_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IR & (__INTERRUPT__)) + +/** + * @brief Clear the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ specifies the interrupts to clear. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_CLEAR_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->IR) = (__INTERRUPT__) + +/** + * @brief Check whether the specified FDCAN flag is set or not. + * @param __HANDLE__ FDCAN handle. + * @param __FLAG__ FDCAN flag. + * This parameter can be one of @arg FDCAN_flags + * @retval FlagStatus + */ +#define __HAL_FDCAN_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IR & (__FLAG__)) + +/** + * @brief Clear the specified FDCAN flags. + * @param __HANDLE__ FDCAN handle. + * @param __FLAG__ specifies the flags to clear. + * This parameter can be any combination of @arg FDCAN_flags + * @retval None + */ +#define __HAL_FDCAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + ((__HANDLE__)->Instance->IR) = (__FLAG__) + +/** @brief Check if the specified FDCAN interrupt source is enabled or disabled. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ specifies the FDCAN interrupt source to check. + * This parameter can be a value of @arg FDCAN_Interrupts + * @retval ITStatus + */ +#define __HAL_FDCAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IE & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FDCAN_Exported_Functions + * @{ + */ + +/** @addtogroup FDCAN_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_FDCAN_Init(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DeInit(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnterPowerDownMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ExitPowerDownMode(FDCAN_HandleTypeDef *hfdcan); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_FDCAN_RegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID, pFDCAN_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxEventFifoCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo0CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo1CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferCompleteCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferAbortCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_ErrorStatusCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group2 + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_FDCAN_ConfigFilter(FDCAN_HandleTypeDef *hfdcan, FDCAN_FilterTypeDef *sFilterConfig); +HAL_StatusTypeDef HAL_FDCAN_ConfigGlobalFilter(FDCAN_HandleTypeDef *hfdcan, uint32_t NonMatchingStd, uint32_t NonMatchingExt, uint32_t RejectRemoteStd, uint32_t RejectRemoteExt); +HAL_StatusTypeDef HAL_FDCAN_ConfigExtendedIdMask(FDCAN_HandleTypeDef *hfdcan, uint32_t Mask); +HAL_StatusTypeDef HAL_FDCAN_ConfigRxFifoOverwrite(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo, uint32_t OperationMode); +HAL_StatusTypeDef HAL_FDCAN_ConfigRamWatchdog(FDCAN_HandleTypeDef *hfdcan, uint32_t CounterStartValue); +HAL_StatusTypeDef HAL_FDCAN_ConfigTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampPrescaler); +HAL_StatusTypeDef HAL_FDCAN_EnableTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampOperation); +HAL_StatusTypeDef HAL_FDCAN_DisableTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +uint16_t HAL_FDCAN_GetTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ResetTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ConfigTimeoutCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimeoutOperation, uint32_t TimeoutPeriod); +HAL_StatusTypeDef HAL_FDCAN_EnableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +uint16_t HAL_FDCAN_GetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ResetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ConfigTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan, uint32_t TdcOffset, uint32_t TdcFilter); +HAL_StatusTypeDef HAL_FDCAN_EnableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnableISOMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableISOMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group3 + * @{ + */ +/* Control functions **********************************************************/ +HAL_StatusTypeDef HAL_FDCAN_Start(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_Stop(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_AddMessageToTxFifoQ(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData); +uint32_t HAL_FDCAN_GetLatestTxFifoQRequestBuffer(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_AbortTxRequest(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndex); +HAL_StatusTypeDef HAL_FDCAN_GetRxMessage(FDCAN_HandleTypeDef *hfdcan, uint32_t RxLocation, FDCAN_RxHeaderTypeDef *pRxHeader, uint8_t *pRxData); +HAL_StatusTypeDef HAL_FDCAN_GetTxEvent(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxEventFifoTypeDef *pTxEvent); +HAL_StatusTypeDef HAL_FDCAN_GetHighPriorityMessageStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_HpMsgStatusTypeDef *HpMsgStatus); +HAL_StatusTypeDef HAL_FDCAN_GetProtocolStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_ProtocolStatusTypeDef *ProtocolStatus); +HAL_StatusTypeDef HAL_FDCAN_GetErrorCounters(FDCAN_HandleTypeDef *hfdcan, FDCAN_ErrorCountersTypeDef *ErrorCounters); +uint32_t HAL_FDCAN_IsTxBufferMessagePending(FDCAN_HandleTypeDef *hfdcan, uint32_t TxBufferIndex); +uint32_t HAL_FDCAN_GetRxFifoFillLevel(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo); +uint32_t HAL_FDCAN_GetTxFifoFreeLevel(FDCAN_HandleTypeDef *hfdcan); +uint32_t HAL_FDCAN_IsRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ExitRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group4 + * @{ + */ +/* Interrupts management ******************************************************/ +HAL_StatusTypeDef HAL_FDCAN_ConfigInterruptLines(FDCAN_HandleTypeDef *hfdcan, uint32_t ITList, uint32_t InterruptLine); +HAL_StatusTypeDef HAL_FDCAN_ActivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t ActiveITs, uint32_t BufferIndexes); +HAL_StatusTypeDef HAL_FDCAN_DeactivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t InactiveITs); +void HAL_FDCAN_IRQHandler(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group5 + * @{ + */ +/* Callback functions *********************************************************/ +void HAL_FDCAN_TxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); +void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); +void HAL_FDCAN_RxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); +void HAL_FDCAN_TxFifoEmptyCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); +void HAL_FDCAN_TxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); +void HAL_FDCAN_HighPriorityMessageCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TimestampWraparoundCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TimeoutOccurredCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_ErrorCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_ErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group6 + * @{ + */ +/* Peripheral State functions *************************************************/ +uint32_t HAL_FDCAN_GetError(FDCAN_HandleTypeDef *hfdcan); +HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Types FDCAN Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Variables FDCAN Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Constants FDCAN Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Macros FDCAN Private Macros + * @{ + */ +#define IS_FDCAN_FRAME_FORMAT(FORMAT) (((FORMAT) == FDCAN_FRAME_CLASSIC ) || \ + ((FORMAT) == FDCAN_FRAME_FD_NO_BRS) || \ + ((FORMAT) == FDCAN_FRAME_FD_BRS )) +#define IS_FDCAN_MODE(MODE) (((MODE) == FDCAN_MODE_NORMAL ) || \ + ((MODE) == FDCAN_MODE_RESTRICTED_OPERATION) || \ + ((MODE) == FDCAN_MODE_BUS_MONITORING ) || \ + ((MODE) == FDCAN_MODE_INTERNAL_LOOPBACK ) || \ + ((MODE) == FDCAN_MODE_EXTERNAL_LOOPBACK )) +#define IS_FDCAN_CKDIV(CKDIV) (((CKDIV) == FDCAN_CLOCK_DIV1 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV2 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV4 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV6 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV8 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV10) || \ + ((CKDIV) == FDCAN_CLOCK_DIV12) || \ + ((CKDIV) == FDCAN_CLOCK_DIV14) || \ + ((CKDIV) == FDCAN_CLOCK_DIV16) || \ + ((CKDIV) == FDCAN_CLOCK_DIV18) || \ + ((CKDIV) == FDCAN_CLOCK_DIV20) || \ + ((CKDIV) == FDCAN_CLOCK_DIV22) || \ + ((CKDIV) == FDCAN_CLOCK_DIV24) || \ + ((CKDIV) == FDCAN_CLOCK_DIV26) || \ + ((CKDIV) == FDCAN_CLOCK_DIV28) || \ + ((CKDIV) == FDCAN_CLOCK_DIV30)) +#define IS_FDCAN_NOMINAL_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 512U)) +#define IS_FDCAN_NOMINAL_SJW(SJW) (((SJW) >= 1U) && ((SJW) <= 128U)) +#define IS_FDCAN_NOMINAL_TSEG1(TSEG1) (((TSEG1) >= 1U) && ((TSEG1) <= 256U)) +#define IS_FDCAN_NOMINAL_TSEG2(TSEG2) (((TSEG2) >= 1U) && ((TSEG2) <= 128U)) +#define IS_FDCAN_DATA_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 32U)) +#define IS_FDCAN_DATA_SJW(SJW) (((SJW) >= 1U) && ((SJW) <= 16U)) +#define IS_FDCAN_DATA_TSEG1(TSEG1) (((TSEG1) >= 1U) && ((TSEG1) <= 32U)) +#define IS_FDCAN_DATA_TSEG2(TSEG2) (((TSEG2) >= 1U) && ((TSEG2) <= 16U)) +#define IS_FDCAN_MAX_VALUE(VALUE, MAX) ((VALUE) <= (MAX)) +#define IS_FDCAN_MIN_VALUE(VALUE, MIN) ((VALUE) >= (MIN)) +#define IS_FDCAN_TX_FIFO_QUEUE_MODE(MODE) (((MODE) == FDCAN_TX_FIFO_OPERATION ) || \ + ((MODE) == FDCAN_TX_QUEUE_OPERATION)) +#define IS_FDCAN_ID_TYPE(ID_TYPE) (((ID_TYPE) == FDCAN_STANDARD_ID) || \ + ((ID_TYPE) == FDCAN_EXTENDED_ID)) +#define IS_FDCAN_FILTER_CFG(CONFIG) (((CONFIG) == FDCAN_FILTER_DISABLE ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO0 ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO1 ) || \ + ((CONFIG) == FDCAN_FILTER_REJECT ) || \ + ((CONFIG) == FDCAN_FILTER_HP ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO0_HP) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO1_HP)) +#define IS_FDCAN_TX_LOCATION(LOCATION) (((LOCATION) == FDCAN_TX_BUFFER0 ) || ((LOCATION) == FDCAN_TX_BUFFER1 ) || \ + ((LOCATION) == FDCAN_TX_BUFFER2 )) +#define IS_FDCAN_TX_LOCATION_LIST(LOCATION) (((LOCATION) >= FDCAN_TX_BUFFER0) && \ + ((LOCATION) <= (FDCAN_TX_BUFFER0 | FDCAN_TX_BUFFER1 | FDCAN_TX_BUFFER2))) +#define IS_FDCAN_RX_FIFO(FIFO) (((FIFO) == FDCAN_RX_FIFO0) || \ + ((FIFO) == FDCAN_RX_FIFO1)) +#define IS_FDCAN_RX_FIFO_MODE(MODE) (((MODE) == FDCAN_RX_FIFO_BLOCKING ) || \ + ((MODE) == FDCAN_RX_FIFO_OVERWRITE)) +#define IS_FDCAN_STD_FILTER_TYPE(TYPE) (((TYPE) == FDCAN_FILTER_RANGE) || \ + ((TYPE) == FDCAN_FILTER_DUAL ) || \ + ((TYPE) == FDCAN_FILTER_MASK )) +#define IS_FDCAN_EXT_FILTER_TYPE(TYPE) (((TYPE) == FDCAN_FILTER_RANGE ) || \ + ((TYPE) == FDCAN_FILTER_DUAL ) || \ + ((TYPE) == FDCAN_FILTER_MASK ) || \ + ((TYPE) == FDCAN_FILTER_RANGE_NO_EIDM)) +#define IS_FDCAN_FRAME_TYPE(TYPE) (((TYPE) == FDCAN_DATA_FRAME ) || \ + ((TYPE) == FDCAN_REMOTE_FRAME)) +#define IS_FDCAN_DLC(DLC) (((DLC) == FDCAN_DLC_BYTES_0 ) || \ + ((DLC) == FDCAN_DLC_BYTES_1 ) || \ + ((DLC) == FDCAN_DLC_BYTES_2 ) || \ + ((DLC) == FDCAN_DLC_BYTES_3 ) || \ + ((DLC) == FDCAN_DLC_BYTES_4 ) || \ + ((DLC) == FDCAN_DLC_BYTES_5 ) || \ + ((DLC) == FDCAN_DLC_BYTES_6 ) || \ + ((DLC) == FDCAN_DLC_BYTES_7 ) || \ + ((DLC) == FDCAN_DLC_BYTES_8 ) || \ + ((DLC) == FDCAN_DLC_BYTES_12) || \ + ((DLC) == FDCAN_DLC_BYTES_16) || \ + ((DLC) == FDCAN_DLC_BYTES_20) || \ + ((DLC) == FDCAN_DLC_BYTES_24) || \ + ((DLC) == FDCAN_DLC_BYTES_32) || \ + ((DLC) == FDCAN_DLC_BYTES_48) || \ + ((DLC) == FDCAN_DLC_BYTES_64)) +#define IS_FDCAN_ESI(ESI) (((ESI) == FDCAN_ESI_ACTIVE ) || \ + ((ESI) == FDCAN_ESI_PASSIVE)) +#define IS_FDCAN_BRS(BRS) (((BRS) == FDCAN_BRS_OFF) || \ + ((BRS) == FDCAN_BRS_ON )) +#define IS_FDCAN_FDF(FDF) (((FDF) == FDCAN_CLASSIC_CAN) || \ + ((FDF) == FDCAN_FD_CAN )) +#define IS_FDCAN_EFC(EFC) (((EFC) == FDCAN_NO_TX_EVENTS ) || \ + ((EFC) == FDCAN_STORE_TX_EVENTS)) +#define IS_FDCAN_IT(IT) (((IT) & ~(FDCAN_IR_MASK)) == 0U) +#define IS_FDCAN_IT_GROUP(IT_GROUP) (((IT_GROUP) & ~(FDCAN_ILS_MASK)) == 0U) +#define IS_FDCAN_NON_MATCHING(DESTINATION) (((DESTINATION) == FDCAN_ACCEPT_IN_RX_FIFO0) || \ + ((DESTINATION) == FDCAN_ACCEPT_IN_RX_FIFO1) || \ + ((DESTINATION) == FDCAN_REJECT )) +#define IS_FDCAN_REJECT_REMOTE(DESTINATION) (((DESTINATION) == FDCAN_FILTER_REMOTE) || \ + ((DESTINATION) == FDCAN_REJECT_REMOTE)) +#define IS_FDCAN_IT_LINE(IT_LINE) (((IT_LINE) == FDCAN_INTERRUPT_LINE0) || \ + ((IT_LINE) == FDCAN_INTERRUPT_LINE1)) +#define IS_FDCAN_TIMESTAMP(OPERATION) (((OPERATION) == FDCAN_TIMESTAMP_INTERNAL) || \ + ((OPERATION) == FDCAN_TIMESTAMP_EXTERNAL)) +#define IS_FDCAN_TIMESTAMP_PRESCALER(PRESCALER) (((PRESCALER) == FDCAN_TIMESTAMP_PRESC_1 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_2 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_3 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_4 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_5 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_6 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_7 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_8 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_9 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_10) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_11) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_12) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_13) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_14) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_15) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_16)) +#define IS_FDCAN_TIMEOUT(OPERATION) (((OPERATION) == FDCAN_TIMEOUT_CONTINUOUS ) || \ + ((OPERATION) == FDCAN_TIMEOUT_TX_EVENT_FIFO) || \ + ((OPERATION) == FDCAN_TIMEOUT_RX_FIFO0 ) || \ + ((OPERATION) == FDCAN_TIMEOUT_RX_FIFO1 )) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup FDCAN_Private_Functions_Prototypes FDCAN Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Functions FDCAN Private Functions + * @{ + */ + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ +#endif /* FDCAN1 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FDCAN_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h new file mode 100644 index 0000000..1dad606 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h @@ -0,0 +1,1018 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FLASH_H +#define STM32G0xx_HAL_FLASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + uint32_t Banks; /*!< Select bank to erase. + This parameter must be a value of @ref FLASH_Banks + (FLASH_BANK_BOTH should be used only for mass erase) */ + uint32_t Page; /*!< Initial Flash page to erase when page erase is enabled + This parameter must be a value between 0 and (FLASH_PAGE_NB - 1) */ + uint32_t NbPages; /*!< Number of pages to be erased. + This parameter must be a value between 1 and (FLASH_PAGE_NB - value of initial page)*/ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a combination of the values of @ref FLASH_OB_Type */ + uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP). + Only one WRP area could be programmed at the same time. + This parameter can be value of @ref FLASH_OB_WRP_Area */ + uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP). + This parameter must be a value between 0 and [FLASH_PAGE_NB - 1]*/ + uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP). + This parameter must be a value between WRPStartOffset and [FLASH_PAGE_NB - 1] */ + uint32_t RDPLevel; /*!< Set the read protection level (used for OPTIONBYTE_RDP). + This parameter can be a value of @ref FLASH_OB_Read_Protection */ + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_Type */ + uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of + @ref FLASH_OB_USER_BOR_ENABLE(*), + @ref FLASH_OB_USER_BOR_LEVEL(*), + @ref FLASH_OB_USER_RESET_CONFIG(*), + @ref FLASH_OB_USER_nRST_STOP, + @ref FLASH_OB_USER_nRST_STANDBY, + @ref FLASH_OB_USER_nRST_SHUTDOWN(*), + @ref FLASH_OB_USER_IWDG_SW, + @ref FLASH_OB_USER_IWDG_STOP, + @ref FLASH_OB_USER_IWDG_STANDBY, + @ref FLASH_OB_USER_WWDG_SW, + @ref FLASH_OB_USER_SRAM_PARITY, + @ref FLASH_OB_USER_BANK_SWAP(*), + @ref FLASH_OB_USER_DUAL_BANK(*), + @ref FLASH_OB_USER_nBOOT_SEL, + @ref FLASH_OB_USER_nBOOT1, + @ref FLASH_OB_USER_nBOOT0, + @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + @note (*) availability depends on devices */ +#if defined(FLASH_PCROP_SUPPORT) + uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP). + This parameter must be a combination of @ref FLASH_OB_PCROP_ZONE + and @ref FLASH_OB_PCROP_RDP. Note that once set, Pcrop erase on RDP level 1 regression + (PCROP_RDP bit) can not be reset. It will be reset by mass erase */ + uint32_t PCROP1AStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1AEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1BStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ +#if defined(FLASH_DBANK_SUPPORT) + uint32_t PCROP2AStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2AEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2BStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ +#endif +#endif +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) + uint32_t BootEntryPoint; /*!< Allow to force a unique boot entry point to Flash or system Flash */ + uint32_t SecSize; /*!< This parameter defines securable memory area width in number of pages starting from Flash base address. + This parameter must be a value between [0] and [FLASH_PAGE_NB], + [0] meaning no secure area defined, [1] meaning first page only protected, etc... */ +#if defined(FLASH_DBANK_SUPPORT) + uint32_t SecSize2; /*!< This parameter defines securable memory area width in number of pages starting from 2nd Bank start address. + This parameter must be a value between [0] and [FLASH_PAGE_NB], + [0] meaning no secure area defined, [1] meaning first page only protected, etc... */ +#endif +#endif +} FLASH_OBProgramInitTypeDef; + +/** +* @brief FLASH handle Structure definition +*/ +typedef struct +{ + HAL_LockTypeDef Lock; /* FLASH locking object */ + uint32_t ErrorCode; /* FLASH error code */ + uint32_t ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ + uint32_t Address; /* Internal variable to save address selected for program in IT context */ + uint32_t Banks; /* Internal variable to save current bank selected during erase in IT context */ + uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */ + uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define FLASH_KEY1 0x45670123U /*!< Flash key1 */ +#define FLASH_KEY2 0xCDEF89ABU /*!< Flash key2: used with FLASH_KEY1 + to unlock the FLASH registers access */ +#define FLASH_OPTKEY1 0x08192A3BU /*!< Flash option byte key1 */ +#define FLASH_OPTKEY2 0x4C5D6E7FU /*!< Flash option byte key2: used with FLASH_OPTKEY1 + to allow option bytes operations */ +/** + * @} + */ + +/** @defgroup FLASH_Latency FLASH Latency + * @{ + */ +#define FLASH_LATENCY_0 0x00000000UL /*!< FLASH Zero wait state */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */ +#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ +/** + * @} + */ + +/** @defgroup FLASH_Flags FLASH Flags Definition + * @{ + */ +#define FLASH_FLAG_EOP ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_EOP_Pos) /*!< FLASH End of operation flag */ +#define FLASH_FLAG_OPERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_OPERR_Pos) /*!< FLASH Operation error flag */ +#define FLASH_FLAG_PROGERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PROGERR_Pos) /*!< FLASH Programming error flag */ +#define FLASH_FLAG_WRPERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_WRPERR_Pos) /*!< FLASH Write protection error flag */ +#define FLASH_FLAG_PGAERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PGAERR_Pos) /*!< FLASH Programming alignment error flag */ +#define FLASH_FLAG_SIZERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_SIZERR_Pos) /*!< FLASH Size error flag */ +#define FLASH_FLAG_PGSERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PGSERR_Pos) /*!< FLASH Programming sequence error flag */ +#define FLASH_FLAG_MISERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_MISERR_Pos) /*!< FLASH Fast programming data miss error flag */ +#define FLASH_FLAG_FASTERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_FASTERR_Pos) /*!< FLASH Fast programming error flag */ +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_FLAG_RDERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_RDERR_Pos) /*!< FLASH PCROP read error flag */ +#endif /* FLASH_PCROP_SUPPORT */ +#define FLASH_FLAG_OPTVERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_OPTVERR_Pos) /*!< FLASH Option validity error flag */ +#define FLASH_FLAG_BSY1 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY1_Pos) /*!< FLASH Operation Busy flag for Bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_BSY2 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY2_Pos) /*!< FLASH Operation Busy flag for Bank 2 */ +#endif +#define FLASH_FLAG_BSY FLASH_FLAG_BSY1 /*!< FLASH Operation Busy flag - legacy name for single bank */ +#define FLASH_FLAG_CFGBSY ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_CFGBSY_Pos) /*!< FLASH Configuration Busy flag */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_PESD ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PESD_Pos) /*!< FLASH Programming/erase operation suspended */ +#endif +#define FLASH_FLAG_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCC_Pos) /*!< FLASH ECC correction on bank 1 */ +#define FLASH_FLAG_ECCD1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCD_Pos) /*!< FLASH ECC detection on bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCC_Pos) /*!< FLASH ECC correction on bank 2 */ +#define FLASH_FLAG_ECCD2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCD_Pos) /*!< FLASH ECC detection on bank 2 */ +#endif +#define FLASH_FLAG_ECCC FLASH_FLAG_ECCC1 /*!< FLASH ECC correction - legacy name for single bank */ +#define FLASH_FLAG_ECCD FLASH_FLAG_ECCD1 /*!< FLASH ECC detection - legacy name for single bank */ +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_EOPIE_Pos) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_OPERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_ERRIE_Pos) /*!< Error Interrupt source */ +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_IT_RDERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_RDERRIE_Pos) /*!< PCROP Read Error Interrupt source*/ +#endif +#define FLASH_IT_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCCIE_Pos) /*!< ECC Correction on Bank 1 Interrupt source */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_IT_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCCIE_Pos) /*!< ECC Correction on Bank 2 Interrupt source */ +#endif +#define FLASH_IT_ECCC FLASH_IT_ECCC1 /*!< ECC Correction - legacy name for single bank */ +/** + * @} + */ + +/** @defgroup FLASH_Error FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_OP FLASH_SR_EOP +#define HAL_FLASH_ERROR_PROG FLASH_SR_PROGERR +#define HAL_FLASH_ERROR_WRP FLASH_SR_WRPERR +#define HAL_FLASH_ERROR_PGA FLASH_SR_PGAERR +#define HAL_FLASH_ERROR_SIZ FLASH_SR_SIZERR +#define HAL_FLASH_ERROR_PGS FLASH_SR_PGSERR +#define HAL_FLASH_ERROR_MIS FLASH_SR_MISERR +#define HAL_FLASH_ERROR_FAST FLASH_SR_FASTERR +#if defined(FLASH_PCROP_SUPPORT) +#define HAL_FLASH_ERROR_RD FLASH_SR_RDERR +#endif +#define HAL_FLASH_ERROR_OPTV FLASH_SR_OPTVERR +#define HAL_FLASH_ERROR_ECCD FLASH_ECCR_ECCD +/** + * @} + */ + +/** @defgroup FLASH_Type_Erase FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_PAGES FLASH_CR_PER /*!< Pages erase only */ +#define FLASH_TYPEERASE_MASS FLASH_CR_MER1 /*!< Flash mass erase activation */ +/** + * @} + */ + +/** @defgroup FLASH_Banks FLASH Banks + * @{ + */ +#define FLASH_BANK_1 FLASH_CR_MER1 /*!< Bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_BANK_2 FLASH_CR_MER2 /*!< Bank 2 */ +#endif +/** + * @} + */ + + +/** @defgroup FLASH_Type_Program FLASH Program Type + * @{ + */ +#define FLASH_TYPEPROGRAM_DOUBLEWORD FLASH_CR_PG /*!< Program a double-word (64-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_FAST FLASH_CR_FSTPG /*!< Fast program a 32 row double-word (64-bit) at a specified address */ +/** + * @} + */ + +/** @defgroup FLASH_OB_Type FLASH Option Bytes Type + * @{ + */ +#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ +#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ +#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ +#if defined(FLASH_PCROP_SUPPORT) +#define OPTIONBYTE_PCROP 0x00000008U /*!< PCROP option byte configuration */ +#endif +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define OPTIONBYTE_SEC 0x00000010U /*!< SEC option byte configuration */ +#endif + +#if defined(FLASH_PCROP_SUPPORT) && defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | \ + OPTIONBYTE_PCROP | OPTIONBYTE_SEC) /*!< All option byte configuration */ +#else +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER) /*!< All option byte configuration */ +#endif +/** + * @} + */ + +/** @defgroup FLASH_OB_WRP_Area FLASH WRP Area + * @{ + */ +#define OB_WRPAREA_ZONE_A 0x00000001U /*!< Flash Zone A */ +#define OB_WRPAREA_ZONE_B 0x00000002U /*!< Flash Zone B */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_WRPAREA_ZONE2_A 0x00000004U /*!< Flash Bank 2 Zone A */ +#define OB_WRPAREA_ZONE2_B 0x00000008U /*!< Flash Bank 2 Zone B */ +#endif +/** + * @} + */ + +/** @defgroup FLASH_OB_Read_Protection FLASH Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 0x000000AAU +#define OB_RDP_LEVEL_1 0x000000BBU +#define OB_RDP_LEVEL_2 0x000000CCU /*!< Warning: When enabling read protection level 2 + it is no more possible to go back to level 1 or 0 */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_Type FLASH Option Bytes User Type + * @{ + */ +#if defined(PWR_BOR_SUPPORT) +#define OB_USER_BOR_EN FLASH_OPTR_BOR_EN /*!< BOR reset enable */ +#define OB_USER_BOR_LEV (FLASH_OPTR_BORF_LEV | FLASH_OPTR_BORR_LEV) /*!< BOR reset Level */ +#endif +#define OB_USER_nRST_STOP FLASH_OPTR_nRST_STOP /*!< Reset generated when entering the stop mode */ +#define OB_USER_nRST_STDBY FLASH_OPTR_nRST_STDBY /*!< Reset generated when entering the standby mode */ +#if defined(PWR_SHDW_SUPPORT) +#define OB_USER_nRST_SHDW FLASH_OPTR_nRST_SHDW /*!< Reset generated when entering the shutdown mode */ +#endif +#define OB_USER_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Independent watchdog selection */ +#define OB_USER_IWDG_STOP FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter freeze in stop mode */ +#define OB_USER_IWDG_STDBY FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter freeze in standby mode */ +#define OB_USER_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Window watchdog selection */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_USER_BANK_SWAP FLASH_OPTR_nSWAP_BANK /*!< Swap bank memory addresses */ +#define OB_USER_DUAL_BANK FLASH_OPTR_DUAL_BANK /*!< Select single or dual bank (depending of device memory size) */ +#endif +#define OB_USER_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity check control */ +#define OB_USER_nBOOT_SEL FLASH_OPTR_nBOOT_SEL /*!< Boot Selection */ +#define OB_USER_nBOOT1 FLASH_OPTR_nBOOT1 /*!< nBoot1 configuration */ +#define OB_USER_nBOOT0 FLASH_OPTR_nBOOT0 /*!< nBoot0 configuration */ +#if defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_NRST_MODE FLASH_OPTR_NRST_MODE /*!< Reset pin configuration */ +#endif +#if defined(FLASH_OPTR_IRHEN) +#define OB_USER_INPUT_RESET_HOLDER FLASH_OPTR_IRHEN /*!< Internal reset holder enable */ +#endif + +#if defined(FLASH_DBANK_SUPPORT) +#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_ALL (OB_USER_BOR_EN | OB_USER_BOR_LEV | OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_nRST_SHDW | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +#else +#define OB_USER_ALL ( OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0) /*!< all option bits */ +#endif +#else +#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_ALL (OB_USER_BOR_EN | OB_USER_BOR_LEV | OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_nRST_SHDW | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +#else +#define OB_USER_ALL ( OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0) /*!< all option bits */ +#endif +#endif +/** + * @} + */ + +#if defined(PWR_BOR_SUPPORT) +/** @defgroup FLASH_OB_USER_BOR_ENABLE FLASH Option Bytes User BOR enable + * @{ + */ +#define OB_BOR_DISABLE 0x00000000U /*!< BOR Reset set to default */ +#define OB_BOR_ENABLE FLASH_OPTR_BOR_EN /*!< Use option byte to define BOR thresholds */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_BOR_LEVEL FLASH Option Bytes User BOR Level + * @{ + */ +#define OB_BOR_LEVEL_FALLING_0 0x00000000U /*!< BOR falling level 1 with threshold around 2.0V */ +#define OB_BOR_LEVEL_FALLING_1 FLASH_OPTR_BORF_LEV_0 /*!< BOR falling level 2 with threshold around 2.2V */ +#define OB_BOR_LEVEL_FALLING_2 FLASH_OPTR_BORF_LEV_1 /*!< BOR falling level 3 with threshold around 2.5V */ +#define OB_BOR_LEVEL_FALLING_3 (FLASH_OPTR_BORF_LEV_0 | FLASH_OPTR_BORF_LEV_1) /*!< BOR falling level 4 with threshold around 2.8V */ +#define OB_BOR_LEVEL_RISING_0 0x00000000U /*!< BOR rising level 1 with threshold around 2.1V */ +#define OB_BOR_LEVEL_RISING_1 FLASH_OPTR_BORR_LEV_0 /*!< BOR rising level 2 with threshold around 2.3V */ +#define OB_BOR_LEVEL_RISING_2 FLASH_OPTR_BORR_LEV_1 /*!< BOR rising level 3 with threshold around 2.6V */ +#define OB_BOR_LEVEL_RISING_3 (FLASH_OPTR_BORR_LEV_0 | FLASH_OPTR_BORR_LEV_1) /*!< BOR rising level 4 with threshold around 2.9V */ +/** + * @} + */ +#endif + +/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User Reset On Stop + * @{ + */ +#define OB_STOP_RST 0x00000000U /*!< Reset generated when entering the stop mode */ +#define OB_STOP_NORST FLASH_OPTR_nRST_STOP /*!< No reset generated when entering the stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_STANDBY FLASH Option Bytes User Reset On Standby + * @{ + */ +#define OB_STANDBY_RST 0x00000000U /*!< Reset generated when entering the standby mode */ +#define OB_STANDBY_NORST FLASH_OPTR_nRST_STDBY /*!< No reset generated when entering the standby mode */ +/** + * @} + */ + +#if defined(PWR_SHDW_SUPPORT) +/** @defgroup FLASH_OB_USER_nRST_SHUTDOWN FLASH Option Bytes User Reset On Shutdown + * @{ + */ +#define OB_SHUTDOWN_RST 0x00000000U /*!< Reset generated when entering the shutdown mode */ +#define OB_SHUTDOWN_NORST FLASH_OPTR_nRST_SHDW /*!< No reset generated when entering the shutdown mode */ +/** + * @} + */ +#endif + +/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG Type + * @{ + */ +#define OB_IWDG_HW 0x00000000U /*!< Hardware independent watchdog */ +#define OB_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Software independent watchdog */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STOP FLASH Option Bytes User IWDG Mode On Stop + * @{ + */ +#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Stop mode */ +#define OB_IWDG_STOP_RUN FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter is running in Stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STANDBY FLASH Option Bytes User IWDG Mode On Standby + * @{ + */ +#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Standby mode */ +#define OB_IWDG_STDBY_RUN FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter is running in Standby mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_WWDG_SW FLASH Option Bytes User WWDG Type + * @{ + */ +#define OB_WWDG_HW 0x00000000U /*!< Hardware window watchdog */ +#define OB_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Software window watchdog */ +/** + * @} + */ + +#if defined(FLASH_DBANK_SUPPORT) +/** @defgroup FLASH_OB_USER_BANK_SWAP FLASH Option Bytes User bank swap Type + * @{ + */ +#define OB_USER_DUALBANK_SWAP_ENABLE 0x00000000U /*!< Enable bank swap */ +#define OB_USER_DUALBANK_SWAP_DISABLE FLASH_OPTR_nSWAP_BANK /*!< Disable bank swap */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_DUAL_BANK FLASH Option Bytes User dual bank enable Type + * @{ + */ +#define OB_USER_DUALBANK_DISABLE 0x00000000U /*!< Disable dual bank */ +#define OB_USER_DUALBANK_ENABLE FLASH_OPTR_DUAL_BANK /*!< Enable dual bank */ +/** + * @} + */ +#endif + +/** @defgroup FLASH_OB_USER_SRAM_PARITY FLASH Option Bytes User SRAM parity + * @{ + */ +#define OB_SRAM_PARITY_ENABLE 0x00000000U /*!< Sram parity enable */ +#define OB_SRAM_PARITY_DISABLE FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity disable */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT_SEL FLASH Option Bytes User Boot0 Selection + * @{ + */ +#define OB_BOOT0_FROM_PIN 0x00000000U /*!< BOOT0 signal is defined by PA14/BOOT0 pin value */ +#define OB_BOOT0_FROM_OB FLASH_OPTR_nBOOT_SEL /*!< BOOT0 signal is defined by nBOOT0 option bit */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT1 FLASH Option Bytes User BOOT1 Type + * @{ + */ +#define OB_BOOT1_SRAM 0x00000000U /*!< Embedded SRAM is selected as boot space (if nBOOT0=0 or BOOT0_pin=1) */ +#define OB_BOOT1_SYSTEM FLASH_OPTR_nBOOT1 /*!< System memory is selected as boot space (if nBOOT0=0 or BOOT0_pin=1) */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT0 FLASH Option Bytes User nBOOT0 option bit + * @{ + */ +#define OB_nBOOT0_RESET 0x00000000U /*!< nBOOT0 = 0 */ +#define OB_nBOOT0_SET FLASH_OPTR_nBOOT0 /*!< nBOOT0 = 1 */ +/** + * @} + */ + +#if defined(GPIO_NRST_CONFIG_SUPPORT) +/** @defgroup FLASH_OB_USER_RESET_CONFIG FLASH Option Bytes User reset config bit + * @{ + */ +#define OB_RESET_MODE_INPUT_ONLY FLASH_OPTR_NRST_MODE_0 /*!< Reset pin is in Reset input mode only */ +#define OB_RESET_MODE_GPIO FLASH_OPTR_NRST_MODE_1 /*!< Reset pin is in GPIO mode mode only */ +#define OB_RESET_MODE_INPUT_OUTPUT FLASH_OPTR_NRST_MODE /*!< Reset pin is in reset input and output mode */ +/** + * @} + */ +#endif + +#if defined(FLASH_OPTR_IRHEN) +/** @defgroup FLASH_OB_USER_INPUT_RESET_HOLDER FLASH Option Bytes User input reset holder bit + * @{ + */ +#define OB_IRH_ENABLE 0x00000000U /*!< Internal Reset handler enable */ +#define OB_IRH_DISABLE FLASH_OPTR_IRHEN /*!< Internal Reset handler disable */ +/** + * @} + */ +#endif + +#if defined(FLASH_PCROP_SUPPORT) +/** @defgroup FLASH_OB_PCROP_ZONE FLASH Option Bytes PCROP ZONE + * @{ + */ +#define OB_PCROP_ZONE_A 0x00000001U /*!< PCROP Zone A */ +#define OB_PCROP_ZONE_B 0x00000002U /*!< PCROP Zone B */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_PCROP_ZONE2_A 0x00000004U /*!< PCROP Bank 2 Zone A */ +#define OB_PCROP_ZONE2_B 0x00000008U /*!< PCROP Bank 2 Zone B */ +#endif +/** + * @} + */ + +/** @defgroup FLASH_OB_PCROP_RDP FLASH Option Bytes PCROP On RDP Level Type + * @{ + */ +#define OB_PCROP_RDP_NOT_ERASE 0x00000000U /*!< PCROP area is not erased when the RDP level + is decreased from Level 1 to Level 0 */ +#define OB_PCROP_RDP_ERASE FLASH_PCROP1AER_PCROP_RDP /*!< PCROP area is erased when the RDP level is + decreased from Level 1 to Level 0 (full mass erase). + Once this bit is set only, it will be reset by mass erase */ +/** + * @} + */ +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +/** @defgroup FLASH_OB_SEC_BOOT_LOCK FLASH Option Bytes Secure boot lock + * @{ + */ +#define OB_BOOT_ENTRY_FORCED_NONE 0x00000000U /*!< Boot entry is free */ +#define OB_BOOT_ENTRY_FORCED_FLASH FLASH_SECR_BOOT_LOCK /*!< Boot entry is forced to Flash or System Flash */ +/** + * @} + */ +#endif + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + * @arg @ref FLASH_LATENCY_2 FLASH Two wait states + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * Returned value can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + * @arg @ref FLASH_LATENCY_2 FLASH Two wait states + */ +#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Reset the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + } while (0U) +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be one of the following values : + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt(*) + * @arg @ref FLASH_IT_ECCC1 ECC Correction Interrupt on bank 1 + * @arg @ref FLASH_IT_ECCC2 ECC Correction Interrupt on bank 2(*) + * @arg @ref FLASH_IT_ECCC ECC Correction Interrupt - legacy name for single bank + * @note (*) availability depends on devices + * @retval none + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECC2R, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#else +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#endif + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be one of the following values : + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt(*) + * @arg @ref FLASH_IT_ECCC1 ECC Correction Interrupt on bank 1 + * @arg @ref FLASH_IT_ECCC2 ECC Correction Interrupt on bank 2(*) + * @arg @ref FLASH_IT_ECCC ECC Correction Interrupt - legacy name for single bank + * @note (*) availability depends on devices + * @retval none + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECC2R, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#else +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#endif + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values : + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag(*) + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @arg @ref FLASH_FLAG_BSY1 FLASH bank 1 write/erase operations in progress flag + * @arg @ref FLASH_FLAG_BSY2 FLASH bank 2 write/erase operations in progress flag(*) + * @arg @ref FLASH_FLAG_BSY FLASH write/erase operations in progress flag - legacy name for single bank + * @arg @ref FLASH_FLAG_CFGBSY FLASH configuration is busy : program or erase setting are used. + * @arg @ref FLASH_FLAG_ECCC1 FLASH one ECC error has been detected and corrected + * @arg @ref FLASH_FLAG_ECCD1 FLASH two ECC errors have been detected on bank 1 + * @arg @ref FLASH_FLAG_ECCC2 FLASH one ECC error has been detected and corrected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCD2 FLASH two ECC errors have been detected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCC FLASH one ECC error has been detected and corrected - legacy name for single bank + * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected - legacy name for single bank + * @note (*) availability depends on devices + * @retval The state of FLASH_FLAG (SET or RESET). + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + ((((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + (READ_BIT(FLASH->ECC2R, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u))) +#else +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u)) +#endif + +/** + * @brief Clear the FLASH pending flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be one of the following values : + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @arg @ref FLASH_FLAG_ECCC1 FLASH one ECC error has been detected and corrected + * @arg @ref FLASH_FLAG_ECCD1 FLASH two ECC errors have been detected on bank 1 + * @arg @ref FLASH_FLAG_ECCC2 FLASH one ECC error has been detected and corrected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCD2 FLASH two ECC errors have been detected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCC FLASH one ECC error has been detected and corrected - legacy name for single bank + * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected - legacy name for single bank + * @note (*) availability depends on devices + * @retval None + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->SR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECCR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECC2R = (1uL << ((__FLAG__) & 0x1Fu)); } \ + } while(0U) +#else +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->SR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECCR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + } while(0U) +#endif +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32g0xx_hal_flash_ex.h" +/* Exported variables --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Variables FLASH Exported Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types --------------------------------------------------------*/ +/** @defgroup FLASH_Private_types FLASH Private Types + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#define FLASH_SIZE_DATA_REGISTER FLASHSIZE_BASE + +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_BANK_SIZE (FLASH_SIZE >> 1) /*!< FLASH Bank Size is Flash size divided by 2 */ +#else +#define FLASH_BANK_SIZE (FLASH_SIZE) /*!< FLASH Bank Size */ +#endif + +#define FLASH_PAGE_SIZE 0x00000800U /*!< FLASH Page Size, 2 KBytes */ + +#if defined(STM32G081xx)||defined(STM32G071xx)||defined(STM32G070xx) +#define FLASH_PAGE_NB 64U +#elif defined(STM32G0C1xx)||defined(STM32G0B1xx)||defined(STM32G0B0xx) +/* warning : on those product, constant represents number of page per bank */ +#define FLASH_PAGE_NB 128U +#else +#define FLASH_PAGE_NB 32U +#endif + +#define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */ + +#define FLASH_TYPENONE 0x00000000U /*!< No programming Procedure On Going */ + +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \ + FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \ + FLASH_SR_MISERR | FLASH_SR_FASTERR | FLASH_SR_RDERR | \ + FLASH_SR_OPTVERR) /*!< All SR error flags */ +#else +#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \ + FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \ + FLASH_SR_MISERR | FLASH_SR_FASTERR | \ + FLASH_SR_OPTVERR) /*!< All SR error flags */ +#endif + +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP | FLASH_SR_PESD) +#else +#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP) +#endif + +/* Internal defines for HAL macro usage */ +#define FLASH_FLAG_REG_POS 16u +#define FLASH_FLAG_SR_ID 1u +#define FLASH_FLAG_CR_ID 2u +#define FLASH_FLAG_ECCR1_ID 4u +#define FLASH_FLAG_ECCR2_ID 8u + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ +#define IS_FLASH_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL))) + +#define IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_BANK_SIZE - 1UL))) +#if defined(FLASH_DBANK_SUPPORT) +#define IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE + FLASH_BANK_SIZE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL))) +#endif + +#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 8UL))) + +#define IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= 0x1FFF7000U) && ((__ADDRESS__) <= (0x1FFF7400U - 8UL))) + +#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) ((IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__)) || (IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__))) + +#define IS_FLASH_FAST_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 256UL))) + +#define IS_FLASH_PAGE(__PAGE__) ((__PAGE__) < FLASH_PAGE_NB) + +#if defined(FLASH_DBANK_SUPPORT) +#define IS_FLASH_BANK(__BANK__) (((__BANK__) == FLASH_BANK_1) || \ + ((__BANK__) == FLASH_BANK_2) || \ + ((__BANK__) == (FLASH_BANK_2 | FLASH_BANK_1))) +#else +#define IS_FLASH_BANK(__BANK__) ((__BANK__) == FLASH_BANK_1) +#endif + +#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES) || \ + ((__VALUE__) == FLASH_TYPEERASE_MASS)) + +#define IS_FLASH_TYPEPROGRAM(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAM_FAST)) + +#define IS_OPTIONBYTE(__VALUE__) ((((__VALUE__) & OPTIONBYTE_ALL) != 0x00U) && \ + (((__VALUE__) & ~OPTIONBYTE_ALL) == 0x00U)) + +#if defined(FLASH_DBANK_SUPPORT) +#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B) || \ + ((__VALUE__) == OB_WRPAREA_ZONE2_A) || ((__VALUE__) == OB_WRPAREA_ZONE2_B)) +#else +#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B)) +#endif + +#define IS_OB_RDP_LEVEL(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_1) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_2)) + +#define IS_OB_USER_TYPE(__TYPE__) ((((__TYPE__) & OB_USER_ALL) != 0x00U) && \ + (((__TYPE__) & ~OB_USER_ALL) == 0x00U)) + +#define IS_OB_USER_CONFIG(__TYPE__,__CONFIG__) ((~(__TYPE__) & (__CONFIG__)) == 0x00U) + +#if defined(FLASH_PCROP_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | \ + OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B | OB_PCROP_RDP_ERASE)) == 0x00U) +#else +#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U) +#endif +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define IS_OB_SEC_BOOT_LOCK(__VALUE__) (((__VALUE__) == OB_BOOT_ENTRY_FORCED_NONE) || ((__VALUE__) == OB_BOOT_ENTRY_FORCED_FLASH)) + +#define IS_OB_SEC_SIZE(__VALUE__) ((__VALUE__) < (FLASH_PAGE_NB + 1U)) +#endif + +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1) || \ + ((__LATENCY__) == FLASH_LATENCY_2)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h new file mode 100644 index 0000000..e6538fd --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h @@ -0,0 +1,119 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FLASH_EX_H +#define STM32G0xx_HAL_FLASH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASHEx_Empty_Check FLASHEx Empty Check + * @{ + */ +#define FLASH_PROG_NOT_EMPTY 0x00000000u /*!< 1st location in Flash is programmed */ +#define FLASH_PROG_EMPTY FLASH_ACR_PROGEMPTY /*!< 1st location in Flash is empty */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +void HAL_FLASHEx_EnableDebugger(void); +void HAL_FLASHEx_DisableDebugger(void); +uint32_t HAL_FLASHEx_FlashEmptyCheck(void); +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty); +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks); +#endif +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_PCROP_GRANULARITY_OFFSET 9u /*!< FLASH Code Readout Protection granularity offset */ +#define FLASH_PCROP_GRANULARITY (1UL << FLASH_PCROP_GRANULARITY_OFFSET) /*!< FLASH Code Readout Protection granularity, 512 Bytes */ +/** + * @} + */ + + +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +#define IS_FLASH_EMPTY_CHECK(__VALUE__) (((__VALUE__) == FLASH_PROG_EMPTY) || ((__VALUE__) == FLASH_PROG_NOT_EMPTY)) +void FLASH_PageErase(uint32_t Banks, uint32_t Page); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FLASH_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h new file mode 100644 index 0000000..451c18c --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h @@ -0,0 +1,340 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_GPIO_H +#define STM32G0xx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFu) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @{ + */ +#define GPIO_MODE_INPUT (0x00000000u) /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (0x00000001u) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (0x00000011u) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (0x00000002u) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (0x00000012u) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG (0x00000003u) /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (0x10110000u) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (0x10210000u) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (0x10310000u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (0x10120000u) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (0x10220000u) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (0x10320000u) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (0x00000000u) /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM (0x00000001u) /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH (0x00000002u) /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003u) /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL (0x00000000u) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP (0x00000001u) /*!< Pull-up activation */ +#define GPIO_PULLDOWN (0x00000002u) /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line is rising edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line rising pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is falling edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line falling pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (__HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) || \ + __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) \ + do { \ + __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__); \ + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__); \ + } while(0) + + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) + +/** + * @brief Clear the EXTI line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32g0xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @brief GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h new file mode 100644 index 0000000..58e4ff5 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h @@ -0,0 +1,838 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_GPIO_EX_H +#define STM32G0xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ +#if defined (STM32G0C1xx) || defined (STM32G0B1xx) +/*------------------------- STM32G0C1xx / STM32G0B1xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPTIM2 ((uint8_t)0x01) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_LPUART2 ((uint8_t)0x01) /*!< LPUART2 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */ + + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_FDCAN1 ((uint8_t)0x03) /*!< FDCAN1 Alternate Function mapping */ +#define GPIO_AF3_FDCAN2 ((uint8_t)0x03) /*!< FDCAN2 Alternate Function mapping */ +#define GPIO_AF3_LPUART2 ((uint8_t)0x03) /*!< LPUART2 Alternate Function mapping */ +#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */ +#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_COMP3 ((uint8_t)0x07) /*!< COMP3 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_LPUART2 ((uint8_t)0x0A) /*!< LPUART2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0A) + +#endif + +#if defined (STM32G0B0xx) +/*------------------------- STM32G0B0xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */ + + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x09) + +#endif + + +#if defined (STM32G081xx) || defined (STM32G071xx) +/*------------------------- STM32G081xx / STM32G071xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_UCPD1 ((uint8_t)0x03) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF3_UCPD2 ((uint8_t)0x03) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G081xx || STM32G071xx */ + +#if defined (STM32G070xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G070xx */ + +#if defined (STM32G051xx) || defined (STM32G061xx) +/*------------------------- STM32G061xx / STM32G051xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G051xx || STM32G061xx */ + +#if defined (STM32G050xx) +/*------------------------- STM32G050xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G050xx */ + +#if defined (STM32G031xx) || defined (STM32G041xx) +/*------------------------- STM32G041xx / STM32G031xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G031xx || STM32G041xx */ + +#if defined (STM32G030xx) +/*------------------------- STM32G030xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G030xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index +* @{ + */ +#if defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 5uL) +#else +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL : 5uL) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_GPIO_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h new file mode 100644 index 0000000..c102762 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h @@ -0,0 +1,782 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_I2C_H +#define STM32G0xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization + section in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \ + : ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32g0xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32g0xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_I2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h new file mode 100644 index 0000000..bf85c12 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h @@ -0,0 +1,166 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_I2C_EX_H +#define STM32G0xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#define I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#if defined(SYSCFG_CFGR1_I2C3_FMP) +#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#else +#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ + ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9)) == I2C_FASTMODEPLUS_PA9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3))) + + + +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32g0xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_I2C_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h new file mode 100644 index 0000000..d9a8841 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h @@ -0,0 +1,584 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PCD_H +#define STM32G0xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_usb.h" + +#if defined (USB_DRD_FS) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +typedef USB_DRD_TypeDef PCD_TypeDef; +typedef USB_DRD_CfgTypeDef PCD_InitTypeDef; +typedef USB_DRD_EPTypeDef PCD_EPTypeDef; + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + + + uint32_t lpm_active; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_active; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ + void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32g0xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + + +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= (uint16_t)(~(__INTERRUPT__))) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR2 |= USB_WAKEUP_EXTI_LINE +#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR2 &= ~(USB_WAKEUP_EXTI_LINE) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ +typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ +typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, + pPCD_BcdCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, + pPCD_LpmCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type); + +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + + +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ + + +#define USB_WAKEUP_EXTI_LINE (0x1U << 4) /*!< USB FS EXTI Line WakeUp Interrupt */ + + +/** + * @} + */ + +/** @defgroup PCD_EP0_MPS PCD EP0 MPS + * @{ + */ +#define PCD_EP0MPS_64 EP_MPS_64 +#define PCD_EP0MPS_32 EP_MPS_32 +#define PCD_EP0MPS_16 EP_MPS_16 +#define PCD_EP0MPS_08 EP_MPS_8 +/** + * @} + */ + +/** @defgroup PCD_ENDP PCD ENDP + * @{ + */ +#define PCD_ENDP0 0U +#define PCD_ENDP1 1U +#define PCD_ENDP2 2U +#define PCD_ENDP3 3U +#define PCD_ENDP4 4U +#define PCD_ENDP5 5U +#define PCD_ENDP6 6U +#define PCD_ENDP7 7U +/** + * @} + */ + +/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind + * @{ + */ +#define PCD_SNG_BUF 0U +#define PCD_DBL_BUF 1U +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +/* SetENDPOINT */ +#define PCD_SET_ENDPOINT USB_DRD_SET_CHEP + +/* GetENDPOINT Register value*/ +#define PCD_GET_ENDPOINT USB_DRD_GET_CHEP + +/* ENDPOINT transfer */ +#define USB_EP0StartXfer USB_EPStartXfer + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpNum, bDir + * @retval None + */ +#define PCD_FreeUserBuffer USB_DRD_FreeUserBuffer + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_TX_STATUS USB_DRD_SET_CHEP_TX_STATUS + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_RX_STATUS USB_DRD_SET_CHEP_RX_STATUS + +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_DBUF USB_DRD_SET_CHEP_KIND +#define PCD_CLEAR_EP_DBUF USB_DRD_CLEAR_CHEP_KIND + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_EP_CTR USB_DRD_CLEAR_RX_CHEP_CTR +#define PCD_CLEAR_TX_EP_CTR USB_DRD_CLEAR_TX_CHEP_CTR +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_RX_DTOG USB_DRD_RX_DTOG +#define PCD_TX_DTOG USB_DRD_TX_DTOG +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_DTOG USB_DRD_CLEAR_RX_DTOG +#define PCD_CLEAR_TX_DTOG USB_DRD_CLEAR_TX_DTOG + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define PCD_SET_EP_ADDRESS USB_DRD_SET_CHEP_ADDRESS + +/** + * @brief sets address of the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wAddr address to be set (must be word aligned). + * @retval None + */ +#define PCD_SET_EP_TX_ADDRESS USB_DRD_SET_CHEP_TX_ADDRESS +#define PCD_SET_EP_RX_ADDRESS USB_DRD_SET_CHEP_RX_ADDRESS + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define PCD_SET_EP_TX_CNT USB_DRD_SET_CHEP_TX_CNT +#define PCD_SET_EP_RX_CNT USB_DRD_SET_CHEP_RX_CNT + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval Counter value + */ +#define PCD_GET_EP_TX_CNT USB_DRD_GET_CHEP_TX_CNT +#define PCD_GET_EP_RX_CNT USB_DRD_GET_CHEP_RX_CNT + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define PCD_SET_EP_DBUF_ADDR USB_DRD_SET_CHEP_DBUF_ADDR + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define PCD_SET_EP_DBUF0_CNT USB_DRD_SET_CHEP_DBUF0_CNT +#define PCD_SET_EP_DBUF1_CNT USB_DRD_SET_CHEP_DBUF1_CNT +#define PCD_SET_EP_DBUF_CNT USB_DRD_SET_CHEP_DBUF_CNT + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_CNT USB_DRD_GET_CHEP_DBUF0_CNT +#define PCD_GET_EP_DBUF1_CNT USB_DRD_GET_CHEP_DBUF1_CNT + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_PCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h new file mode 100644 index 0000000..f0732d2 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h @@ -0,0 +1,91 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PCD_EX_H +#define STM32G0xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined (USB_DRD_FS) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + + + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); + +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PCD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h new file mode 100644 index 0000000..1603ce1 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h @@ -0,0 +1,328 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PWR_H +#define STM32G0xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_WakeUp_Pins PWR WakeUp pins + * @{ + */ +#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN6 PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN6_HIGH PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_LOW ((PWR_CR4_WP1 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP1) /*!< Wakeup pin 1 (with low level detection) */ +#define PWR_WAKEUP_PIN2_LOW ((PWR_CR4_WP2 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP2) /*!< Wakeup pin 2 (with low level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3_LOW ((PWR_CR4_WP3 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP3) /*!< Wakeup pin 3 (with low level detection) */ +#endif +#define PWR_WAKEUP_PIN4_LOW ((PWR_CR4_WP4 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP4) /*!< Wakeup pin 4 (with low level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5_LOW ((PWR_CR4_WP5 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP5) /*!< Wakeup pin 5 (with low level detection) */ +#endif +#define PWR_WAKEUP_PIN6_LOW ((PWR_CR4_WP6 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP6) /*!< Wakeup pin 6 (with low level detection) */ +/** + * @} + */ + +/** @defgroup PWR_Low_Power_Mode_Selection PWR Low Power Mode Selection + * @{ + */ +#define PWR_LOWPOWERMODE_STOP0 (0x00000000u) /*!< Stop 0: stop mode with main regulator */ +#define PWR_LOWPOWERMODE_STOP1 (PWR_CR1_LPMS_0) /*!< Stop 1: stop mode with low power regulator */ +#define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */ +#if defined(PWR_SHDW_SUPPORT) +#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2) /*!< Shutdown mode */ +#endif +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0x00000000u) /*!< Regulator in main mode */ +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Sleep mode */ +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Sleep mode */ +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Stop mode */ +#define PWR_STOPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Stop mode */ +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Status Flags + * @brief Elements values convention: 0000 00XX 000Y YYYYb + * - Y YYYY : Flag position in the XX register (5 bits) + * - XX : Status register (2 bits) + * - 01: SR1 register + * - 10: SR2 register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +#define PWR_FLAG_WUF1 (0x00010000u | PWR_SR1_WUF1) /*!< Wakeup event on wakeup pin 1 */ +#define PWR_FLAG_WUF2 (0x00010000u | PWR_SR1_WUF2) /*!< Wakeup event on wakeup pin 2 */ +#if defined(PWR_CR3_EWUP3) +#define PWR_FLAG_WUF3 (0x00010000u | PWR_SR1_WUF3) /*!< Wakeup event on wakeup pin 3 */ +#endif +#define PWR_FLAG_WUF4 (0x00010000u | PWR_SR1_WUF4) /*!< Wakeup event on wakeup pin 4 */ +#if defined(PWR_CR3_EWUP5) +#define PWR_FLAG_WUF5 (0x00010000u | PWR_SR1_WUF5) /*!< Wakeup event on wakeup pin 5 */ +#endif +#define PWR_FLAG_WUF6 (0x00010000u | PWR_SR1_WUF6) /*!< Wakeup event on wakeup pin 6 */ +#define PWR_FLAG_WUF (0x00010000u | PWR_SR1_WUF) /*!< Wakeup event on all wakeup pin */ +#define PWR_FLAG_SB (0x00010000u | PWR_SR1_SBF) /*!< Standby flag */ +#define PWR_FLAG_WUFI (0x00010000u | PWR_SR1_WUFI) /*!< Wakeup on internal wakeup line */ +#define PWR_FLAG_FLASH_READY (0x00020000u | PWR_SR2_FLASH_RDY) /*!< Flash ready */ +#define PWR_FLAG_REGLPS (0x00020000u | PWR_SR2_REGLPS) /*!< Regulator Low Power started */ +#define PWR_FLAG_REGLPF (0x00020000u | PWR_SR2_REGLPF) /*!< Regulator Low Power flag */ +#if defined(PWR_PVD_SUPPORT) +#define PWR_FLAG_PVDO (0x00020000u | PWR_SR2_PVDO) /*!< Power Voltage Detector output */ +#endif +#if defined(PWR_PVM_SUPPORT) +#define PWR_FLAG_PVMO_USB (0x00020000u | PWR_SR2_PVMO_USB) /*!< Power Voltage Monitoring output */ +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ +/** @brief Check whether or not a specific PWR flag is set. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. (*) + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. (*) + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_SB: StandBy Flag. Indicates that the system + * entered StandBy mode. + * @arg PWR_FLAG_WUFI: Wake-Up Flag Internal. Set when a wakeup is + * detected on the internal wakeup line. + * OR a combination of following values: + * @arg PWR_FLAG_FLASH_READY: Flash is ready. Indicates whether flash + * can be used or not + * @arg PWR_FLAG_REGLPS: Low Power Regulator Started. Indicates whether + * or not the low-power regulator is ready. + * @arg PWR_FLAG_REGLPF: Low Power Regulator Flag. Indicates whether the + * regulator is ready in main mode or is in low-power mode. + * @if defined(STM32G081xx) + * @arg PWR_FLAG_PVDO: Power Voltage Detector Output. Indicates whether + * VDD voltage is below or above the selected PVD threshold. + * @endif + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) (((__FLAG__) & 0x00010000u) ?\ + ((PWR->SR1 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)) :\ + ((PWR->SR2 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u))) + +/** @brief Clear a specific PWR flag. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. (*) + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. (*) + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_WUF: Encompasses all Wake Up Flags. + * @arg PWR_FLAG_SB: Standby Flag. Indicates that the system + * entered Standby mode. + * @retval None + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->SCR = (__FLAG__)) + +/** + * @} + */ + +/* Private constants-------------------------------------------------------*/ +/** @defgroup PWR_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants + * @{ + */ +#define PWR_WUP_POLARITY_SHIFT 0x08u /*!< Internal constant used to retrieve wakeup pin polariry */ +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +#define IS_PWR_WAKEUP_PIN(PIN) ((((PIN) & ((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) != 0x00000000u) && \ + (((PIN) & ~((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) == 0x00000000u)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || \ + ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || \ + ((ENTRY) == PWR_STOPENTRY_WFE)) +/** + * @} + */ + +/* Include PWR HAL Extended module */ +#include "stm32g0xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSTANDBYMode(void); +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h new file mode 100644 index 0000000..3459d99 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h @@ -0,0 +1,643 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PWR_EX_H +#define STM32G0xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Types PWR Extended Exported Types + * @{ + */ + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief PWR PVM configuration structure definition + */ +typedef struct +{ + uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold. + This parameter can be a value of @ref PWREx_PVM_Type. + @arg @ref PWR_PVM_USB Peripheral Voltage Monitoring USB enable */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWREx_PVM_Mode. */ +}PWR_PVMTypeDef; +#endif + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value or a combination of + @ref PWR_PVD_detection_level. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode. */ +}PWR_PVDTypeDef; +#endif + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants + * @{ + */ +#if defined(PWR_PVD_SUPPORT) +/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels + * @note see datasheet for selection voltage value + * @{ + */ +#define PWR_PVDLEVEL_RISING_0 (0x00000000u) /*!< PVD threshold level 0 for rising detection */ +#define PWR_PVDLEVEL_RISING_1 (PWR_CR2_PVDRT_0) /*!< PVD threshold level 1 for rising detection */ +#define PWR_PVDLEVEL_RISING_2 (PWR_CR2_PVDRT_1) /*!< PVD threshold level 2 for rising detection */ +#define PWR_PVDLEVEL_RISING_3 (PWR_CR2_PVDRT_0 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 3 for rising detection */ +#define PWR_PVDLEVEL_RISING_4 (PWR_CR2_PVDRT_2) /*!< PVD threshold level 4 for rising detection */ +#define PWR_PVDLEVEL_RISING_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /*!< PVD threshold level 5 for rising detection */ +#define PWR_PVDLEVEL_RISING_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 6 for rising detection */ +#define PWR_PVDLEVEL_FALLING_0 (0x00000000u) /*!< PVD threshold level 0 for falling detection */ +#define PWR_PVDLEVEL_FALLING_1 (PWR_CR2_PVDFT_0) /*!< PVD threshold level 1 for falling detection */ +#define PWR_PVDLEVEL_FALLING_2 (PWR_CR2_PVDFT_1) /*!< PVD threshold level 2 for falling detection */ +#define PWR_PVDLEVEL_FALLING_3 (PWR_CR2_PVDFT_0 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 3 for falling detection */ +#define PWR_PVDLEVEL_FALLING_4 (PWR_CR2_PVDFT_2) /*!< PVD threshold level 4 for falling detection */ +#define PWR_PVDLEVEL_FALLING_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /*!< PVD threshold level 5 for falling detection */ +#define PWR_PVDLEVEL_FALLING_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 6 for falling detection */ +#define PWR_PVDLEVEL_0 (PWR_PVDLEVEL_RISING_0 | PWR_PVDLEVEL_FALLING_0) /*!< same PVD threshold level 0 on rising & falling */ +#define PWR_PVDLEVEL_1 (PWR_PVDLEVEL_RISING_1 | PWR_PVDLEVEL_FALLING_1) /*!< same PVD threshold level 1 on rising & falling */ +#define PWR_PVDLEVEL_2 (PWR_PVDLEVEL_RISING_2 | PWR_PVDLEVEL_FALLING_2) /*!< same PVD threshold level 2 on rising & falling */ +#define PWR_PVDLEVEL_3 (PWR_PVDLEVEL_RISING_3 | PWR_PVDLEVEL_FALLING_3) /*!< same PVD threshold level 3 on rising & falling */ +#define PWR_PVDLEVEL_4 (PWR_PVDLEVEL_RISING_4 | PWR_PVDLEVEL_FALLING_4) /*!< same PVD threshold level 4 on rising & falling */ +#define PWR_PVDLEVEL_5 (PWR_PVDLEVEL_RISING_5 | PWR_PVDLEVEL_FALLING_5) /*!< same PVD threshold level 5 on rising & falling */ +#define PWR_PVDLEVEL_6 (PWR_PVDLEVEL_RISING_6 | PWR_PVDLEVEL_FALLING_6) /*!< same PVD threshold level 6 on rising & falling */ +#define PWR_PVDLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /*!< External input analog voltage (compared internally to VREFINT) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000u) /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001u) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002u) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001u) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002u) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003u) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVD (EXTI_IMR1_IM16) /*!< External interrupt line 16 connected to PVD */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line + * @{ + */ +#define PWR_EVENT_LINE_PVD (EXTI_EMR1_EM16) /*!< Event line 16 connected to PVD */ +/** + * @} + */ +#endif + +#if defined(PWR_PVM_SUPPORT) +/** @defgroup PWREx_PVM_Type Peripheral Voltage Monitoring type + * @{ + */ +#define PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */ +/** + * @} + */ +/** @defgroup PWREx_PVM_Mode PWR PVM interrupt and event mode + * @{ + */ +#define PWR_PVM_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */ +#define PWR_PVM_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVM_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVM_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVM_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVM_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVM_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ +/** @defgroup PWR_PVM_EXTI_LINE PWR PVM external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVM (EXTI_IMR2_IM34) /*!< External interrupt line 34 connected to PVM */ +/** + * @} + */ + +/** @defgroup PWR_PVM_EVENT_LINE PWR PVM event line + * @{ + */ +#define PWR_EVENT_LINE_PVM (EXTI_EMR2_EM34) /*!< Event line 34 connected to PVM */ +/** + * @} + */ +#endif + +/** @defgroup PWREx_VBAT_Battery_Charging_Selection PWR battery charging resistor selection + * @{ + */ +#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000u) /*!< VBAT charging through a 5 kOhms resistor */ +#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR4_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_Bit_Number GPIO bit position + * @brief for I/O pull up/down setting in standby/shutdown mode + * @{ + */ +#define PWR_GPIO_BIT_0 PWR_PUCRB_PU0 /*!< GPIO port I/O pin 0 */ +#define PWR_GPIO_BIT_1 PWR_PUCRB_PU1 /*!< GPIO port I/O pin 1 */ +#define PWR_GPIO_BIT_2 PWR_PUCRB_PU2 /*!< GPIO port I/O pin 2 */ +#define PWR_GPIO_BIT_3 PWR_PUCRB_PU3 /*!< GPIO port I/O pin 3 */ +#define PWR_GPIO_BIT_4 PWR_PUCRB_PU4 /*!< GPIO port I/O pin 4 */ +#define PWR_GPIO_BIT_5 PWR_PUCRB_PU5 /*!< GPIO port I/O pin 5 */ +#define PWR_GPIO_BIT_6 PWR_PUCRB_PU6 /*!< GPIO port I/O pin 6 */ +#define PWR_GPIO_BIT_7 PWR_PUCRB_PU7 /*!< GPIO port I/O pin 7 */ +#define PWR_GPIO_BIT_8 PWR_PUCRB_PU8 /*!< GPIO port I/O pin 8 */ +#define PWR_GPIO_BIT_9 PWR_PUCRB_PU9 /*!< GPIO port I/O pin 9 */ +#define PWR_GPIO_BIT_10 PWR_PUCRB_PU10 /*!< GPIO port I/O pin 10 */ +#define PWR_GPIO_BIT_11 PWR_PUCRB_PU11 /*!< GPIO port I/O pin 11 */ +#define PWR_GPIO_BIT_12 PWR_PUCRB_PU12 /*!< GPIO port I/O pin 12 */ +#define PWR_GPIO_BIT_13 PWR_PUCRB_PU13 /*!< GPIO port I/O pin 13 */ +#define PWR_GPIO_BIT_14 PWR_PUCRB_PU14 /*!< GPIO port I/O pin 14 */ +#define PWR_GPIO_BIT_15 PWR_PUCRB_PU15 /*!< GPIO port I/O pin 15 */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_Port GPIO Port + * @{ + */ +#define PWR_GPIO_A (0x00000000u) /*!< GPIO port A */ +#define PWR_GPIO_B (0x00000001u) /*!< GPIO port B */ +#define PWR_GPIO_C (0x00000002u) /*!< GPIO port C */ +#define PWR_GPIO_D (0x00000003u) /*!< GPIO port D */ +#if defined (GPIOE) +#define PWR_GPIO_E (0x00000004u) /*!< GPIO port E */ +#endif +#define PWR_GPIO_F (0x00000005u) /*!< GPIO port F */ +/** + * @} + */ + +/** @defgroup PWREx_Flash_PowerDown Flash Power Down modes + * @{ + */ +#define PWR_FLASHPD_LPRUN PWR_CR1_FPD_LPRUN /*!< Enable Flash power down in low power run mode */ +#define PWR_FLASHPD_LPSLEEP PWR_CR1_FPD_LPSLP /*!< Enable Flash power down in low power sleep mode */ +#define PWR_FLASHPD_STOP PWR_CR1_FPD_STOP /*!< Enable Flash power down in stop mode */ +/** + * @} + */ + +/** @defgroup PWREx_Regulator_Voltage_Scale PWR Regulator voltage scale + * @{ + */ +#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS_0 /*!< Voltage scaling range 1 */ +#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 /*!< Voltage scaling range 2 */ +/** + * @} + */ + +/** @addtogroup PWR_Flag PWR Status Flags + * @brief Elements values convention: 0000 00XX 000Y YYYYb + * - Y YYYY : Flag position in the XX register (5 bits) + * - XX : Status register (2 bits) + * - 01: SR1 register + * - 10: SR2 register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +#if defined(PWR_PVM_SUPPORT) +#define PWR_FLAG_PVMOUSB (0x00020000u | PWR_SR2_PVMO_USB) /*!< USB Peripheral Voltage Monitoring output */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Macros PWR Extended Exported Macros + * @{ + */ +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Enable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Disable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt Rising flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_RISING_FLAG() (EXTI->RPR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt Falling flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() (EXTI->FPR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt Rising flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt Falling flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR1, PWR_EXTI_LINE_PVD) +#endif + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Enable the PVM Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Event Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM) + +/** + * @brief Disable the PVM Event Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Disable the PVM Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM) + +/** + * @brief Check whether or not the PVM EXTI interrupt Rising flag is set. + * @retval EXTI PVM Line Status. + */ +#define __HAL_PWR_PVM_EXTI_GET_RISING_FLAG() (EXTI->RPR2 & PWR_EXTI_LINE_PVM) + +/** + * @brief Check whether or not the PVM EXTI interrupt Falling flag is set. + * @retval EXTI PVM Line Status. + */ +#define __HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() (EXTI->FPR2 & PWR_EXTI_LINE_PVM) + +/** + * @brief Clear the PVM EXTI interrupt Rising flag. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Clear the PVM EXTI interrupt Falling flag. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR2, PWR_EXTI_LINE_PVM) +#endif +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask + * @{ + */ +#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */ +#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */ +#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */ +#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */ +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros + * @{ + */ + +#define IS_PWR_BATTERY_RESISTOR_SELECT(__RESISTOR__) (((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_5) || \ + ((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) + +#define IS_PWR_GPIO_BIT_NUMBER(__BIT_NUMBER__) ((((__BIT_NUMBER__) & 0x0000FFFFu) != 0x00u) && \ + (((__BIT_NUMBER__) & 0xFFFF0000u) == 0x00u)) +#if defined (GPIOE) +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_D) || \ + ((__GPIO__) == PWR_GPIO_E) || \ + ((__GPIO__) == PWR_GPIO_F)) +#else +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_D) || \ + ((__GPIO__) == PWR_GPIO_F)) +#endif + +#define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) != 0x00u) && \ + (((__MODE__) & ~(PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) == 0x00u)) + +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) + +#if defined(PWR_PVD_SUPPORT) +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) & ~(PWR_CR2_PVDRT | PWR_CR2_PVDFT)) == 0x00000000u) + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING) || \ + ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) +#endif + +#if defined(PWR_PVM_SUPPORT) +#define IS_PWR_PVM_TYPE(TYPE) ((TYPE) == PWR_PVM_USB) + +#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING)) +#endif +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection); +void HAL_PWREx_DisableBatteryCharging(void); +#if defined(PWR_CR3_ENB_ULP) +void HAL_PWREx_EnablePORMonitorSampling(void); +void HAL_PWREx_DisablePORMonitorSampling(void); +#endif +void HAL_PWREx_EnableInternalWakeUpLine(void); +void HAL_PWREx_DisableInternalWakeUpLine(void); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); +#if defined(PWR_CR3_RRS) +void HAL_PWREx_EnableSRAMRetention(void); +void HAL_PWREx_DisableSRAMRetention(void); +#endif +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode); +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode); +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); +#if defined(PWR_PVD_SUPPORT) +/* Power voltage detection configuration functions ****************************/ +HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWREx_EnablePVD(void); +void HAL_PWREx_DisablePVD(void); +#endif +#if defined(PWR_PVM_SUPPORT) +/* Power voltage monitoring configuration functions ***************************/ +void HAL_PWREx_EnableVddIO2(void); +void HAL_PWREx_DisableVddIO2(void); +void HAL_PWREx_EnableVddUSB(void); +void HAL_PWREx_DisableVddUSB(void); +void HAL_PWREx_EnablePVMUSB(void); +void HAL_PWREx_DisablePVMUSB(void); +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM); +#endif + +/* Low Power modes configuration functions ************************************/ +void HAL_PWREx_EnableLowPowerRunMode(void); +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); +#if defined(PWR_SHDW_SUPPORT) +void HAL_PWREx_EnterSHUTDOWNMode(void); +#endif + +#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT) +void HAL_PWREx_PVD_PVM_IRQHandler(void); +void HAL_PWREx_PVD_PVM_Rising_Callback(void); +void HAL_PWREx_PVD_PVM_Falling_Callback(void); +#elif defined(PWR_PVD_SUPPORT) +void HAL_PWREx_PVD_IRQHandler(void); +void HAL_PWREx_PVD_Rising_Callback(void); +void HAL_PWREx_PVD_Falling_Callback(void); +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PWR_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h new file mode 100644 index 0000000..61d0101 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h @@ -0,0 +1,3111 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RCC_H +#define STM32G0xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_rcc.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RCC_Private_Constants + * @{ + */ +/* Defines used for Flags */ +#define CR_REG_INDEX 1U +#define BDCR_REG_INDEX 2U +#define CSR_REG_INDEX 3U +#if defined(RCC_HSI48_SUPPORT) +#define CRRCR_REG_INDEX 4U +#endif /* RCC_HSI48_SUPPORT */ + +#define RCC_FLAG_MASK 0x1FU + +/* Define used for IS_RCC_CLOCKTYPE() */ +#define RCC_CLOCKTYPE_ALL (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1) /*!< All clocktype to configure */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) \ + (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#else +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) \ + (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) + +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)127U) + +#define IS_RCC_HSIDIV(__DIV__) (((__DIV__) == RCC_HSI_DIV1) || ((__DIV__) == RCC_HSI_DIV2) || \ + ((__DIV__) == RCC_HSI_DIV4) || ((__DIV__) == RCC_HSI_DIV8) || \ + ((__DIV__) == RCC_HSI_DIV16) || ((__DIV__) == RCC_HSI_DIV32)|| \ + ((__DIV__) == RCC_HSI_DIV64) || ((__DIV__) == RCC_HSI_DIV128)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_NONE) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_PLLM_VALUE(__VALUE__) ((__VALUE__) <= RCC_PLLM_DIV8) + +#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) + +#define IS_RCC_PLLP_VALUE(__VALUE__) ((RCC_PLLP_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLP_DIV32)) + +#if defined(RCC_PLLQ_SUPPORT) +#define IS_RCC_PLLQ_VALUE(__VALUE__) ((RCC_PLLQ_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLQ_DIV8)) +#endif /* RCC_PLLQ_SUPPORT */ + +#define IS_RCC_PLLR_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8)) + +#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_ALL) != 0x00UL) && (((__CLK__) & ~RCC_CLOCKTYPE_ALL) == 0x00UL)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) + +#if defined(RCC_MCO2_SUPPORT) +#define IS_RCC_MCO(__MCOX__) ( ((__MCOX__) == RCC_MCO1) || ((__MCOX__) == RCC_MCO2) ) +#else +#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1) +#endif /* RCC_MCO2_SUPPORT */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI48) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTC_WKUP)) +#elif defined(STM32G0B0xx) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTC_WKUP)) +#else +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) +#endif /* STM32G0C1xx || STM32G0B1xx */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16) || ((__DIV__) == RCC_MCODIV_32) || \ + ((__DIV__) == RCC_MCODIV_64) || ((__DIV__) == RCC_MCODIV_128) || \ + ((__DIV__) == RCC_MCODIV_256)|| ((__DIV__) == RCC_MCODIV_512) || \ + ((__DIV__) == RCC_MCODIV_1024)) +#else +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16) || ((__DIV__) == RCC_MCODIV_32) || \ + ((__DIV__) == RCC_MCODIV_64) || ((__DIV__) == RCC_MCODIV_128)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_MCO2_SUPPORT) +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI48) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTC_WKUP)) +#else +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTC_WKUP)) +#endif /* RCC_HSI48_SUPPORT */ +#define IS_RCC_MCO2DIV(__DIV__) (((__DIV__) == RCC_MCO2DIV_1) || ((__DIV__) == RCC_MCO2DIV_2) || \ + ((__DIV__) == RCC_MCO2DIV_4) || ((__DIV__) == RCC_MCO2DIV_8) || \ + ((__DIV__) == RCC_MCO2DIV_16) || ((__DIV__) == RCC_MCO2DIV_32) || \ + ((__DIV__) == RCC_MCO2DIV_64) || ((__DIV__) == RCC_MCO2DIV_128)|| \ + ((__DIV__) == RCC_MCO2DIV_256)|| ((__DIV__) == RCC_MCO2DIV_512)|| \ + ((__DIV__) == RCC_MCO2DIV_1024)) + +#endif /* RCC_MCO2_SUPPORT */ + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a value of @ref RCC_PLLM_Clock_Divider */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 */ + + uint32_t PLLP; /*!< PLLP: PLL Division factor. + User have to set the PLLQ parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + +#if defined(RCC_PLLQ_SUPPORT) + uint32_t PLLQ; /*!< PLLQ: PLL Division factor. + User have to set the PLLQ parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ +#endif /* RCC_PLLQ_SUPPORT */ + + uint32_t PLLR; /*!< PLLR: PLL Division for the main system clock. + User have to set the PLLR parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSIDiv; /*!< The division factor of the HSI16. + This parameter can be a value of @ref RCC_HSI_Div */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + +#if defined(RCC_HSI48_SUPPORT) + uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32G0C1xx/STM32G0B1xx/STM32G0B0xx devices). + This parameter can be a value of @ref RCC_HSI48_Config */ + +#endif /* RCC_HSI48_SUPPORT */ + + RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a combination of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_DBP_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT /* LSE timeout in ms */ +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 0x00000020U /*!< HSI48 to configure */ +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< External clock source for LSE clock */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT 64U /*!< Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Div HSI Div + * @{ + */ +#define RCC_HSI_DIV1 0x00000000U /*!< HSI clock is not divided */ +#define RCC_HSI_DIV2 RCC_CR_HSIDIV_0 /*!< HSI clock is divided by 2 */ +#define RCC_HSI_DIV4 RCC_CR_HSIDIV_1 /*!< HSI clock is divided by 4 */ +#define RCC_HSI_DIV8 (RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 8 */ +#define RCC_HSI_DIV16 RCC_CR_HSIDIV_2 /*!< HSI clock is divided by 16 */ +#define RCC_HSI_DIV32 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 32 */ +#define RCC_HSI_DIV64 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1) /*!< HSI clock is divided by 64 */ +#define RCC_HSI_DIV128 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +#define RCC_HSI48_ON RCC_CR_HSI48ON /*!< HSI48 clock activation */ +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ +/** + * @} + */ + +/** @defgroup RCC_PLLM_Clock_Divider PLLM Clock Divider + * @{ + */ +#define RCC_PLLM_DIV1 0x00000000U /*!< PLLM division factor = 8 */ +#define RCC_PLLM_DIV2 RCC_PLLCFGR_PLLM_0 /*!< PLLM division factor = 2 */ +#define RCC_PLLM_DIV3 RCC_PLLCFGR_PLLM_1 /*!< PLLM division factor = 3 */ +#define RCC_PLLM_DIV4 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 4 */ +#define RCC_PLLM_DIV5 RCC_PLLCFGR_PLLM_2 /*!< PLLM division factor = 5 */ +#define RCC_PLLM_DIV6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 6 */ +#define RCC_PLLM_DIV7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLLM division factor = 7 */ +#define RCC_PLLM_DIV8 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1| RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider + * @{ + */ +#define RCC_PLLP_DIV2 RCC_PLLCFGR_PLLP_0 /*!< PLLP division factor = 2 */ +#define RCC_PLLP_DIV3 RCC_PLLCFGR_PLLP_1 /*!< PLLP division factor = 3 */ +#define RCC_PLLP_DIV4 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 4 */ +#define RCC_PLLP_DIV5 RCC_PLLCFGR_PLLP_2 /*!< PLLP division factor = 5 */ +#define RCC_PLLP_DIV6 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 6 */ +#define RCC_PLLP_DIV7 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV8 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 8 */ +#define RCC_PLLP_DIV9 RCC_PLLCFGR_PLLP_3 /*!< PLLP division factor = 9 */ +#define RCC_PLLP_DIV10 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 10 */ +#define RCC_PLLP_DIV11 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 11 */ +#define RCC_PLLP_DIV12 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 12 */ +#define RCC_PLLP_DIV13 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 13 */ +#define RCC_PLLP_DIV14 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 14 */ +#define RCC_PLLP_DIV15 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 15 */ +#define RCC_PLLP_DIV16 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 16 */ +#define RCC_PLLP_DIV17 RCC_PLLCFGR_PLLP_4 /*!< PLLP division factor = 17 */ +#define RCC_PLLP_DIV18 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 18 */ +#define RCC_PLLP_DIV19 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 19 */ +#define RCC_PLLP_DIV20 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 20 */ +#define RCC_PLLP_DIV21 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 21 */ +#define RCC_PLLP_DIV22 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 22 */ +#define RCC_PLLP_DIV23 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 23 */ +#define RCC_PLLP_DIV24 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 24 */ +#define RCC_PLLP_DIV25 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3) /*!< PLLP division factor = 25 */ +#define RCC_PLLP_DIV26 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 26 */ +#define RCC_PLLP_DIV27 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 27 */ +#define RCC_PLLP_DIV28 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 28 */ +#define RCC_PLLP_DIV29 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 29 */ +#define RCC_PLLP_DIV30 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 30 */ +#define RCC_PLLP_DIV31 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 31 */ +#define RCC_PLLP_DIV32 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 32 */ +/** + * @} + */ + +#if defined(RCC_PLLQ_SUPPORT) +/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider + * @{ + */ +#define RCC_PLLQ_DIV2 RCC_PLLCFGR_PLLQ_0 /*!< PLLQ division factor = 2 */ +#define RCC_PLLQ_DIV3 RCC_PLLCFGR_PLLQ_1 /*!< PLLQ division factor = 3 */ +#define RCC_PLLQ_DIV4 (RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 4 */ +#define RCC_PLLQ_DIV5 RCC_PLLCFGR_PLLQ_2 /*!< PLLQ division factor = 5 */ +#define RCC_PLLQ_DIV6 (RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 6 */ +#define RCC_PLLQ_DIV7 (RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_1) /*!< PLLQ division factor = 7 */ +#define RCC_PLLQ_DIV8 (RCC_PLLCFGR_PLLQ_2 |RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 8 */ +/** * @} + */ +#endif /* RCC_PLLQ_SUPPORT */ + +/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider + * @{ + */ +#define RCC_PLLR_DIV2 RCC_PLLCFGR_PLLR_0 /*!< PLLR division factor = 2 */ +#define RCC_PLLR_DIV3 RCC_PLLCFGR_PLLR_1 /*!< PLLR division factor = 3 */ +#define RCC_PLLR_DIV4 (RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 4 */ +#define RCC_PLLR_DIV5 RCC_PLLCFGR_PLLR_2 /*!< PLLR division factor = 5 */ +#define RCC_PLLR_DIV6 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 6 */ +#define RCC_PLLR_DIV7 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_1) /*!< PLLR division factor = 7 */ +#define RCC_PLLR_DIV8 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 8 */ +/** * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Output PLL Clock Output + * @{ + */ +#define RCC_PLLPCLK RCC_PLLCFGR_PLLPEN /*!< PLLPCLK selection from main PLL */ +#if defined(RCC_PLLQ_SUPPORT) +#define RCC_PLLQCLK RCC_PLLCFGR_PLLQEN /*!< PLLQCLK selection from main PLL */ +#endif /* RCC_PLLQ_SUPPORT */ +#define RCC_PLLRCLK RCC_PLLCFGR_PLLREN /*!< PLLRCLK selection from main PLL */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_1 /*!< PLL selection as system clock */ +#define RCC_SYSCLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection as system clock */ +#define RCC_SYSCLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_1 /*!< PLL used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source APB Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NONE 0x00000000U /*!< No clock configured for RTC */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U +#if defined(RCC_MCO2_SUPPORT) +#define RCC_MCO2 0x00000001U /*!< MCO2 index */ +#endif /* RCC_MCO2_SUPPORT */ + +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO1 output disabled, no clock on MCO1 */ +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_1 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< PLLCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_CFGR_MCOSEL_3) +#define RCC_MCO1SOURCE_PLLPCLK RCC_CFGR_MCOSEL_3 /*!< PLLPCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLQCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_0) /*!< PLLQCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_RTCCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1) /*!< RTCCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_RTC_WKUP (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_0) /*!< RTC_Wakeup selection as MCO1 source */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Prescaler MCO1 Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 0x00000000U /*!< MCO not divided */ +#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO divided by 16 */ +#define RCC_MCODIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 32 */ +#define RCC_MCODIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 64 */ +#define RCC_MCODIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 128 */ +#if defined(RCC_CFGR_MCOPRE_3) +#define RCC_MCODIV_256 RCC_CFGR_MCOPRE_3 /*!< MCO divided by 256 */ +#define RCC_MCODIV_512 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 512 */ +#define RCC_MCODIV_1024 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 1024 */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source + * @{ + */ +#define RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO2 output disabled, no clock on MCO2 */ +#define RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO2SOURCE_HSI48 RCC_CFGR_MCO2SEL_1 /*!< HSI48 selection as MCO2 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_1| RCC_CFGR_MCO2SEL_0) /*!< HSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLCLK (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_0) /*!< PLLCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_1) /*!< LSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< LSE selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLPCLK RCC_CFGR_MCO2SEL_3 /*!< PLLPCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLQCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_0) /*!< PLLQCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_RTCCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1) /*!< RTCCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< RTC_Wakeup selection as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_MCO2_Clock_Prescaler MCO2 Clock Prescaler + * @{ + */ +#define RCC_MCO2DIV_1 0x00000000U /*!< MCO2 not divided */ +#define RCC_MCO2DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO2 divided by 2 */ +#define RCC_MCO2DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO2 divided by 4 */ +#define RCC_MCO2DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 8 */ +#define RCC_MCO2DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO2 divided by 16 */ +#define RCC_MCO2DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 32 */ +#define RCC_MCO2DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 64 */ +#define RCC_MCO2DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 128 */ +#define RCC_MCO2DIV_256 RCC_CFGR_MCO2PRE_3 /*!< MCO2 divided by 256 */ +#define RCC_MCO2DIV_512 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 512 */ +#define RCC_MCO2DIV_1024 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 1024 */ +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define RCC_IT_CSS RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */ +#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ +#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */ +#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ +#define RCC_FLAG_PINRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos) /*!< PIN reset flag */ +#define RCC_FLAG_PWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PWRRSTF_Pos) /*!< BOR or POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ + +#if defined(RCC_HSI48_SUPPORT) +/* Flags in the CRRCR register */ +#define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_RC48RDY_Pos) /*!< HSI48 Ready flag */ +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Configuration + * @{ + */ +#define RCC_LSEDRIVE_LOW 0x00000000U /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable AHB Peripheral Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#endif /* DMA2 */ + + +#define __HAL_RCC_FLASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* RNG */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* AES */ + +#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) +#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enable_Disable IOPORT Clock Enable Disable + * @brief Enable or disable the IO Ports clock. + * @note After reset, the IO ports clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* GPIOE */ + +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) +#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) +#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) +#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM2 */ + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM4 */ + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRS */ + +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* USART5 */ + +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* USART6 */ + +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPUART1 */ + +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPUART2 */ + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* I2C3 */ + +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* CEC */ + +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* UCPD1 */ + +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* UCPD2 */ + +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* FDCAN1 || FDCAN2 */ + +#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* DAC1 */ + +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPTIM2 */ + +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM15 */ + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) +#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) +#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) +#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) +#endif /* DAC1 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) +#endif /* LPTIM2 */ +#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) +#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) +#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) +#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) +#define __HAL_RCC_TIM14_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) +#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) +#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enabled_Disabled_Status AHB Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) != RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) != RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) != RESET) +#endif /* AES */ + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) == RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) == RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) == RESET) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enabled_Disabled_Status IOPORT Clock Enabled or Disabled Status + * @brief Check whether the IO Port clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) != RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) != RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) != RESET) + + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) == RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) == RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enabled_Disabled_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) != 0U) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) != 0U) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) != 0U) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) != 0U) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) != 0U) +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN) != 0U) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) != 0U) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) != 0U) +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) != 0U) +#endif /* FDCAN1 || FDCAN2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) != 0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) != 0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) != 0U) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) != 0U) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) != 0U) +#define __HAL_RCC_USART4_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) != 0U) +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) != 0U) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) != 0U) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN)!= 0U) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN)!= 0U) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) != 0U) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) != 0U) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) != 0U) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) != 0U) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) != 0U) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) != 0U) +#endif /* UCPD2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) != 0U) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) != 0U) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) != 0U) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) != 0U) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) != 0U) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) == 0U) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) == 0U) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) == 0U) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) == 0U) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) == 0U) +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN) == 0U) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) == 0U) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) == 0U) +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) == 0U) +#endif /* FDCAN1 || FDCAN2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) == 0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) == 0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) == 0U) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) == 0U) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) == 0U) +#define __HAL_RCC_USART4_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) == 0U) +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) == 0U) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) == 0U) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN)== 0U) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN)== 0U) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) == 0U) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) == 0U) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) == 0U) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) == 0U) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) == 0U) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) == 0U) +#endif /* UCPD2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) == 0U) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) == 0U) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) == 0U) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) == 0U) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) == 0U) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enabled_Disabled_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) != 0U) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) != 0U) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) != 0U) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) != 0U) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) != 0U) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) != 0U) +#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) != 0U) + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) == 0U) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) == 0U) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) == 0U) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) == 0U) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) == 0U) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) == 0U) +#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Force_Release_Reset AHB Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() WRITE_REG(RCC->AHBRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#if defined(DMA2) +#define __HAL_RCC_DMA2_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA2RST) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) +#if defined(RNG) +#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_RNGRST) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_AESRST) +#endif /* AES */ + +#define __HAL_RCC_AHB_RELEASE_RESET() WRITE_REG(RCC->AHBRSTR, 0x00000000U) +#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#if defined(DMA2) +#define __HAL_RCC_DMA2_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA2RST) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) +#if defined(RNG) +#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_RNGRST) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_AESRST) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Force_Release_Reset IOPORT Force Release Reset + * @brief Force or release IO Port reset. + * @{ + */ +#define __HAL_RCC_IOP_FORCE_RESET() WRITE_REG(RCC->IOPRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOERST) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +#define __HAL_RCC_IOP_RELEASE_RESET() WRITE_REG(RCC->IOPRSTR, 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOERST) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() WRITE_REG(RCC->APBRSTR1, 0xFFFFFFFFU) + +#if defined(TIM2) +#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM2RST) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#if defined(TIM4) +#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM4RST) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM6RST) +#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM7RST) +#if defined(CRS) +#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CRSRST) +#endif /* CRS */ +#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI2RST) +#if defined(SPI3) +#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI3RST) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART3RST) +#define __HAL_RCC_USART4_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART4RST) +#if defined(USART5) +#define __HAL_RCC_USART5_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART5RST) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART6RST) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART1RST) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART2RST) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C2RST) +#if defined(I2C3) +#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C3RST) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CECRST) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD1RST) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD2RST) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USBRST) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_FDCANRST) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) +#if defined(DAC1) +#define __HAL_RCC_DAC1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DAC1RST) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM2RST) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM1RST) +#endif /* LPTIM1 */ +#define __HAL_RCC_APB1_RELEASE_RESET() WRITE_REG(RCC->APBRSTR1, 0x00000000U) +#if defined(TIM2) +#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM2RST) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#if defined(TIM4) +#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM4RST) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM6RST) +#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM7RST) +#if defined(CRS) +#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CRSRST) +#endif /* CRS */ +#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI2RST) +#if defined(SPI3) +#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI3RST) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART3RST) +#define __HAL_RCC_USART4_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART4RST) +#if defined(USART5) +#define __HAL_RCC_USART5_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART5RST) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART6RST) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART1RST) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART2RST) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C2RST) +#if defined(I2C3) +#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C3RST) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CECRST) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD1RST) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD2RST) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USBRST) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_FDCANRST) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) +#if defined(DAC1) +#define __HAL_RCC_DAC1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DAC1RST) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM2RST) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM1RST) +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APBRSTR2, 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#if defined(TIM15) +#define __HAL_RCC_TIM15_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM15RST) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) + +#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APBRSTR2, 0x00U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#if defined(TIM15) +#define __HAL_RCC_TIM15_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM15RST) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enable_Disable AHB Peripherals Clock Sleep Enable Disable + * @brief Enable or disable the AHB peripherals clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) +#endif /* AES */ +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) +#endif /* AES */ + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enable_Disable IOPORT Clock Sleep Enable Disable + * @brief Enable or disable the IOPORT clock during Low Power (Sleep) mode. + * @note IOPORT clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) +#define __HAL_RCC_USART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) +#define __HAL_RCC_USART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) +#endif /* FDCAN1) || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enabled_Disabled_Status AHB Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN)!= RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) != RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) != RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) != RESET) +#endif /* AES */ +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) == RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) == RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) == RESET) +#endif /* AES */ + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enabled_Disabled_Status IOPORT Clock Sleep Enabled or Disabled Status + * @brief Check whether the IOPORT clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN)!= RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN)!= RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN)!= RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN)!= RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN)!= RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN)!= RESET) + + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) == RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) == RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enabled_Disabled_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) != RESET) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) != RESET) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) != RESET) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) != RESET) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) != RESET) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) != RESET) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) != RESET) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) != RESET) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) != RESET) +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) != RESET) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) != RESET) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) != RESET) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) != RESET) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN)!= RESET) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN)!= RESET) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) != RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) != RESET) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) != RESET) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) != RESET) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) != RESET) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) != RESET) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) != RESET) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) != RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) != RESET) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) != RESET) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) != RESET) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) != RESET) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) == RESET) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) == RESET) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) == RESET) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) == RESET) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) == RESET) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) == RESET) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) == RESET) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) == RESET) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) == RESET) +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) == RESET) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) == RESET) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) == RESET) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) == RESET) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN)== RESET) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN)== RESET) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) == RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) == RESET) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) == RESET) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) == RESET) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) == RESET) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) == RESET) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) == RESET) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) == RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) == RESET) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) == RESET) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) == RESET) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) == RESET) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enabled_Disabled_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) != RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) != RESET) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) != RESET) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) != RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) != RESET) + + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) == RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) == RESET) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) == RESET) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) == RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) == RESET) + + +/** + * @} + */ + +/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset + * @{ + */ + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + * @retval None + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note As the RTC is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the RTC + * (to be done once after reset). + * @note These macros must be used after the RTC clock source was selected. + * @retval None + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** + * @} + */ + +/** @defgroup RCC_Clock_Configuration RCC Clock Configuration + * @{ + */ + +/** @brief Macros to enable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macros to disable the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 127. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_ICSCR_HSITRIM_Pos) + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI startup time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) + +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + +/** @brief Macro to configure the HSISYS clock. + * @param __HSIDIV__ specifies the HSI16 division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_HSI_DIV1 HSI clock source is divided by 1 + * @arg @ref RCC_HSI_DIV2 HSI clock source is divided by 2 + * @arg @ref RCC_HSI_DIV4 HSI clock source is divided by 4 + * @arg @ref RCC_HSI_DIV8 HSI clock source is divided by 8 + * @arg @ref RCC_HSI_DIV16 HSI clock source is divided by 16 + * @arg @ref RCC_HSI_DIV32 HSI clock source is divided by 32 + * @arg @ref RCC_HSI_DIV64 HSI clock source is divided by 64 + * @arg @ref RCC_HSI_DIV128 HSI clock source is divided by 128 + */ +#define __HAL_RCC_HSI_CONFIG(__HSIDIV__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, (__HSIDIV__)) + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0U) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0U) + +#if defined(RCC_HSI48_SUPPORT) +/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note After enabling the HSI48, the application software should wait on HSI48RDY + * flag to be set indicating that HSI48 clock is stable. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSI48ON) + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON) + +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @addtogroup RCC_RTC_Clock_Configuration + * @{ + */ + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * @retval None + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ + MODIFY_REG( RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + + +/** @brief Macro to get the RTC clock source. + * @retval The returned value can be one of the following: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + */ +#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))) + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ + +/** + * @} + */ + +/** @addtogroup RCC_Clock_Configuration + * @{ + */ + +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to configure the PLL multiplication factor. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a value of RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) + +/** + * @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * + * @param __PLLM__ specifies the division factor for PLL VCO input clock. + * This parameter must be a value of RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * + * @param __PLLP__ specifies the division factor for ADC clock. + * This parameter must be a value of @ref RCC_PLLP_Clock_Divider. + * + * @param __PLLQ__ specifies the division factor for RBG & HS Timers clocks.(1) + * This parameter must be a value of @ref RCC_PLLQ_Clock_Divider + * @note (1)__PLLQ__ parameter availability depends on devices + * @note If the USB FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the RNG needs a frequency lower than or equal to 48 MHz to work + * correctly. + * + * @param __PLLR__ specifies the division factor for the main system clock. + * This parameter must be a value of RCC_PLLR_Clock_Divider + * @note You have to set the PLL parameters correctly to not exceed 64MHZ. + * @retval None + */ +#if defined(RCC_PLLQ_SUPPORT) +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \ + ((uint32_t) (__PLLSOURCE__) | \ + (uint32_t) (__PLLM__) | \ + (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + (uint32_t) (__PLLP__) | \ + (uint32_t) (__PLLQ__) | \ + (uint32_t) (__PLLR__))) +#else +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLR), \ + ((uint32_t) (__PLLSOURCE__) | \ + (uint32_t) (__PLLM__) | \ + (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + (uint32_t) (__PLLP__) | \ + (uint32_t) (__PLLR__))) +#endif /* RCC_PLLQ_SUPPORT */ +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_NONE No oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) + +/** + * @brief Enable each clock output (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @note Enabling clock outputs RCC_PLLPCLK and RCC_PLLQCLK(*) can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLLRCLK cannot + * be stopped if used as System Clock. + * @note (*) RCC_PLLQCLK availability depends on devices + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLPCLK This clock is used to generate the clock for the ADC. + * @if defined(STM32G081xx) + * @arg @ref RCC_PLLQCLK This Clock is used to generate the clock for the High Speed Timers, + * and the random analog generator (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Disable each clock output (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @note Disabling clock outputs RCC_PLLPCLK and RCC_PLLQCLK(*) can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLLRCLK cannot + * be stopped if used as System Clock. + * @note (*) RCC_PLLQCLK availability depends on devices + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLPCLK This clock may be used to generate the clock for the ADC, I2S1. + * @if defined(STM32G081xx) + * @arg @ref RCC_PLLQCLK This Clock may be used to generate the clock for the High Speed Timers, + * and RNG (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Get clock output enable status (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked. + * This parameter can be one of the following values: + * @arg RCC_PLLPCLK This clock may be used to generate the clock for ADC, I2S1. + * @if defined(STM32G081xx) + * @arg RCC_PLLQCLK This Clock may be used to generate the clock for the HS Timers, + * the RNG (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval SET / RESET + * @note (*) RCC_PLLQCLK availability depends on devices + */ +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSI LSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSE LSE oscillator is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSI LSI used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSE LSE used as system clock source. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)) + +/** @brief Macro to configure the Microcontroller output clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee + * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP output clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ output clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO source + @if STM32G0C1xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 128 + * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 256 + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +#if defined(RCC_MCO2_SUPPORT) +/** @brief Macro to configure the Microcontroller output clock 2. + * @param __MCOCLKSOURCE__ specifies the MCO2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled + * @arg @ref RCC_MCO2SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 sourcee + * @arg @ref RCC_MCO2SOURCE_PLLCLK Main PLL clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLLPCLK PLLP output clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLLQCLK PLLQ output clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_RTCCLK RTC clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO2 source + @if STM32G0C1xx + * @arg @ref RCC_MCO2SOURCE_HSI48 HSI48 clock selected as MCO2 source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2DIV_1 MCO2 clock source is divided by 1 + * @arg @ref RCC_MCO2DIV_2 MCO2 clock source is divided by 2 + * @arg @ref RCC_MCO2DIV_4 MCO2 clock source is divided by 4 + * @arg @ref RCC_MCO2DIV_8 MCO2 clock source is divided by 8 + * @arg @ref RCC_MCO2DIV_16 MCO2 clock source is divided by 16 + * @arg @ref RCC_MCO2DIV_32 MCO2 clock source is divided by 32 + * @arg @ref RCC_MCO2DIV_64 MCO2 clock source is divided by 64 + * @arg @ref RCC_MCO2DIV_128 MCO2 clock source is divided by 128 + * @arg @ref RCC_MCO2DIV_256 MCO2 clock source is divided by 256 + * @arg @ref RCC_MCO2DIV_512 MCO2 clock source is divided by 512 + * @arg @ref RCC_MCO2DIV_1024 MCO2 clock source is divided by 1024 + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) +#endif /* RCC_MCO2_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear RCC interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PWRRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @arg @ref RCC_FLAG_PWRRST BOR or POR/PDR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#if defined(RCC_HSI48_SUPPORT) +#define __HAL_RCC_GET_FLAG(__FLAG__) \ + (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == CRRCR_REG_INDEX) ? RCC->CRRCR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR)))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U) +#else +#define __HAL_RCC_GET_FLAG(__FLAG__) \ + (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U) +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32g0xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_EnableLSECSS(void); +void HAL_RCC_DisableLSECSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* LSE & HSE CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); +void HAL_RCC_LSECSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h new file mode 100644 index 0000000..ad6ad73 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h @@ -0,0 +1,1593 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RCC_EX_H +#define STM32G0xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. + This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ +#if defined(RCC_CCIPR_USART2SEL) + uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source. + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + uint32_t Usart3ClockSelection; /*!< Specifies USART3 clock source. + This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) + uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source + This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ +#endif /* LPUART1 */ + +#if defined(LPUART2) + uint32_t Lpuart2ClockSelection; /*!< Specifies LPUART2 clock source + This parameter can be a value of @ref RCCEx_LPUART2_Clock_Source */ +#endif /* LPUART2 */ + + uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source + This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ + +#if defined(RCC_CCIPR_I2C2SEL) + uint32_t I2c2ClockSelection; /*!< Specifies I2C2 clock source + This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */ +#endif /* RCC_CCIPR_I2C2SEL */ + + uint32_t I2s1ClockSelection; /*!< Specifies I2S1 clock source + This parameter can be a value of @ref RCCEx_I2S1_Clock_Source */ +#if defined(RCC_CCIPR2_I2S2SEL) + uint32_t I2s2ClockSelection; /*!< Specifies I2S2 clock source + This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */ +#endif /* RCC_CCIPR2_I2S2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) + uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source + This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ +#endif /* RCC_CCIPR_LPTIM2SEL */ +#if defined(RNG) + uint32_t RngClockSelection; /*!< Specifies RNG clock source + This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ +#endif /* RNG */ + uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source + This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ +#if defined(CEC) + uint32_t CecClockSelection; /*!< Specifies CEC Clock clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ +#endif /* CEC */ +#if defined(RCC_CCIPR_TIM1SEL) + uint32_t Tim1ClockSelection; /*!< Specifies TIM1 Clock clock source + This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */ +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + uint32_t Tim15ClockSelection; /*!< Specifies TIM15 Clock clock source + This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */ +#endif /* RCC_CCIPR_TIM15SEL */ + uint32_t RTCClockSelection; /*!< Specifies RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ +#if defined(RCC_CCIPR2_USBSEL) + uint32_t UsbClockSelection; /*!< Specifies USB Clock clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(FDCAN1) || defined(FDCAN2) + uint32_t FdcanClockSelection; /*!< Specifies FDCAN Clock clock source + This parameter can be a value of @ref RCCEx_FDCAN_Clock_Source */ +#endif /* FDCAN1 || FDCAN2 */ +} RCC_PeriphCLKInitTypeDef; + +#if defined(CRS) + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x7F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +} RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x7F */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +} RCC_CRSSynchroInfoTypeDef; + +#endif /* CRS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source + * @{ + */ +#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ +#define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */ +/** + * @} + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_USART1 0x00000001U +#if defined(RCC_CCIPR_USART2SEL) +#define RCC_PERIPHCLK_USART2 0x00000002U +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +#define RCC_PERIPHCLK_USART3 0x00000004U +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(LPUART1) +#define RCC_PERIPHCLK_LPUART1 0x00000010U +#endif /* LPUART1 */ +#define RCC_PERIPHCLK_I2C1 0x00000020U +#if defined(RCC_CCIPR_I2C2SEL) +#define RCC_PERIPHCLK_I2C2 0x00000040U +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) +#define RCC_PERIPHCLK_LPTIM1 0x00000200U +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) +#define RCC_PERIPHCLK_LPTIM2 0x00000400U +#endif /* RCC_CCIPR_LPTIM2SEL */ +#define RCC_PERIPHCLK_I2S1 0x00000800U +#if defined(LPUART2) +#define RCC_PERIPHCLK_LPUART2 0x00001000U +#endif /* LPUART2 */ +#if defined(RCC_CCIPR2_I2S2SEL) +#define RCC_PERIPHCLK_I2S2 0x00002000U +#endif /* RCC_CCIPR2_I2S2SEL */ +#define RCC_PERIPHCLK_ADC 0x00004000U +#define RCC_PERIPHCLK_RTC 0x00020000U +#if defined(RCC_CCIPR_RNGSEL) +#define RCC_PERIPHCLK_RNG 0x00040000U +#endif /* RCC_CCIPR_RNGSEL */ +#if defined(RCC_CCIPR_CECSEL) +#define RCC_PERIPHCLK_CEC 0x00080000U +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR_TIM1SEL) +#define RCC_PERIPHCLK_TIM1 0x00200000U +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) +#define RCC_PERIPHCLK_TIM15 0x00400000U +#endif /* RCC_CCIPR_TIM15SEL */ +#if defined(RCC_CCIPR2_USBSEL) +#define RCC_PERIPHCLK_USB 0x01000000U +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(FDCAN1) || defined(FDCAN2) +#define RCC_PERIPHCLK_FDCAN 0x02000000U +#endif /* FDCAN1 || FDCAN2 */ +/** + * @} + */ + + +/** @defgroup RCCEx_USART1_Clock_Source RCC USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 /*!< SYSCLK clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 /*!< HSI clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) /*!< LSE clock selected as USART1 clock */ +/** + * @} + */ + +#if defined(RCC_CCIPR_USART2SEL) +/** @defgroup RCCEx_USART2_Clock_Source RCC USART2 Clock Source + * @{ + */ +#define RCC_USART2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0 /*!< SYSCLK clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1 /*!< HSI clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1) /*!< LSE clock selected as USART2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +/** @defgroup RCCEx_USART3_Clock_Source RCC USART3 Clock Source + * @{ + */ +#define RCC_USART3CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_SYSCLK RCC_CCIPR_USART3SEL_0 /*!< SYSCLK clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_HSI RCC_CCIPR_USART3SEL_1 /*!< HSI clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_LSE (RCC_CCIPR_USART3SEL_0 | RCC_CCIPR_USART3SEL_1) /*!< LSE clock selected as USART3 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) +/** @defgroup RCCEx_LPUART1_Clock_Source RCC LPUART1 Clock Source + * @{ + */ +#define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYSCLK clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1) /*!< LSE clock selected as LPUART1 clock */ +/** + * @} + */ +#endif /* LPUART1 */ + +#if defined(LPUART2) +/** @defgroup RCCEx_LPUART2_Clock_Source RCC LPUART2 Clock Source + * @{ + */ +#define RCC_LPUART2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_SYSCLK RCC_CCIPR_LPUART2SEL_0 /*!< SYSCLK clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_HSI RCC_CCIPR_LPUART2SEL_1 /*!< HSI clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_LSE (RCC_CCIPR_LPUART2SEL_0 | RCC_CCIPR_LPUART2SEL_1) /*!< LSE clock selected as LPUART2 clock */ +/** + * @} + */ +#endif /* LPUART2 */ + +/** @defgroup RCCEx_I2C1_Clock_Source RCC I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 /*!< SYSCLK clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1 /*!< HSI clock selected as I2C1 clock */ +/** + * @} + */ + +#if defined(RCC_CCIPR_I2C2SEL) +/** @defgroup RCCEx_I2C2_Clock_Source RCC I2C2 Clock Source + * @{ + */ +#define RCC_I2C2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C2 clock */ +#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CCIPR_I2C2SEL_0 /*!< SYSCLK clock selected as I2C2 clock */ +#define RCC_I2C2CLKSOURCE_HSI RCC_CCIPR_I2C2SEL_1 /*!< HSI clock selected as I2C2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_I2C2SEL */ + +/** @defgroup RCCEx_I2S1_Clock_Source RCC I2S1 Clock Source + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_PLL RCC_CCIPR2_I2S1SEL_0 /*!< PLL "P" selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_HSI RCC_CCIPR2_I2S1SEL_1 /*!< HSI clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR2_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ +#else +#define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_PLL RCC_CCIPR_I2S1SEL_0 /*!< PLL "P" selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_HSI RCC_CCIPR_I2S1SEL_1 /*!< HSI clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +#if defined(RCC_CCIPR2_I2S2SEL) +/** @defgroup RCCEx_I2S2_Clock_Source RCC I2S2 Clock Source + * @{ + */ +#define RCC_I2S2CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_PLL RCC_CCIPR2_I2S2SEL_0 /*!< PLL "P" selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_HSI RCC_CCIPR2_I2S2SEL_1 /*!< HSI clock selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_EXT RCC_CCIPR2_I2S2SEL /*!< External I2S clock source selected as I2S2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0 /*!< LSI clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1 /*!< HSI clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL /*!< LSE clock selected as LPTimer 1 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +/** @defgroup RCCEx_LPTIM2_Clock_Source RCC LPTIM2 Clock Source + * @{ + */ +#define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0 /*!< LSI clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1 /*!< HSI clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL /*!< LSE clock selected as LPTimer 2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(RNG) +/** @defgroup RCCEx_RNG_Clock_Source RCC RNG Clock Source + * @{ + */ +#define RCC_RNGCLKSOURCE_NONE 0x00000000U /*!< No clock selected */ +#define RCC_RNGCLKSOURCE_HSI_DIV8 RCC_CCIPR_RNGSEL_0 /*!< HSI oscillator divided by 8 clock selected as RNG clock */ +#define RCC_RNGCLKSOURCE_SYSCLK RCC_CCIPR_RNGSEL_1 /*!< SYSCLK selected as RNG clock */ +#define RCC_RNGCLKSOURCE_PLL (RCC_CCIPR_RNGSEL_0|RCC_CCIPR_RNGSEL_1) /*!< PLL "Q" selected as RNG clock */ + +/** + * @} + */ + +/** @defgroup RCCEx_RNG_Division_factor RCC RNG Division factor + * @{ + */ +#define RCC_RNGCLK_DIV1 0x00000000U /*!< RNG clock not divided */ +#define RCC_RNGCLK_DIV2 RCC_CCIPR_RNGDIV_0 /*!< RNG clock divided by 2 */ +#define RCC_RNGCLK_DIV4 RCC_CCIPR_RNGDIV_1 /*!< RNG clock divided by 4 */ +#define RCC_RNGCLK_DIV8 (RCC_CCIPR_RNGDIV_0|RCC_CCIPR_RNGDIV_1) /*!< RNG clock divided by 8 */ + +/** + * @} + */ +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCCEx_FDCAN_Clock_Source RCC FDCAN Clock Source + * @{ + */ +#define RCC_FDCANCLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 selected as FDCAN clock */ +#define RCC_FDCANCLKSOURCE_PLL RCC_CCIPR2_FDCANSEL_0 /*!< PLL "Q" selected as FDCAN clock */ +#define RCC_FDCANCLKSOURCE_HSE RCC_CCIPR2_FDCANSEL_1 /*!< HSE oscillator clock selected as FDCAN clock */ + +/** + * @} + */ +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RCC_CCIPR2_USBSEL) +/** @defgroup RCCEx_USB_Clock_Source USB Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_USBCLKSOURCE_HSI48 0x00000000U /*!< HSI48 oscillator clock selected as USB clock */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_USBCLKSOURCE_HSE RCC_CCIPR2_USBSEL_0 /*!< HSE oscillator clock selected as USB clock */ +#define RCC_USBCLKSOURCE_PLL RCC_CCIPR2_USBSEL_1 /*!< PLL "Q" selected as USB clock */ +/** + * @} + */ +#endif /* RCC_CCIPR2_USBSEL */ + +/** @defgroup RCCEx_ADC_Clock_Source RCC ADC Clock Source + * @{ + */ + +#define RCC_ADCCLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define RCC_ADCCLKSOURCE_PLLADC RCC_CCIPR_ADCSEL_0 /*!< PLL "P" (PLLADC) used as ADC clock */ +#define RCC_ADCCLKSOURCE_HSI RCC_CCIPR_ADCSEL_1 /*!< HSI used as ADC clock */ +/** + * @} + */ + +#if defined(CEC) +/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source + * @{ + */ +#define RCC_CECCLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as default CEC clock */ +#define RCC_CECCLKSOURCE_LSE RCC_CCIPR_CECSEL /*!< LSE oscillator clock used as CEC clock */ +/** + * @} + */ +#endif /* CEC */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCCEx_TIM1_Clock_Source RCC TIM1 Clock Source + * @{ + */ +#define RCC_TIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 1 clock */ +#define RCC_TIM1CLKSOURCE_PLL RCC_CCIPR_TIM1SEL /*!< PLL "Q" clock selected as Timer 1 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @defgroup RCCEx_TIM15_Clock_Source RCC TIM15 Clock Source + * @{ + */ +#define RCC_TIM15CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 15 clock */ +#define RCC_TIM15CLKSOURCE_PLL RCC_CCIPR_TIM15SEL /*!< PLL "Q" clock selected as Timer 15 clock */ + +/** + * @} + */ +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Status RCCEx CRS Status + * @{ + */ +#define RCC_CRS_NONE 0x00000000U +#define RCC_CRS_TIMEOUT 0x00000001U +#define RCC_CRS_SYNCOK 0x00000002U +#define RCC_CRS_SYNCWARN 0x00000004U +#define RCC_CRS_SYNCERR 0x00000008U +#define RCC_CRS_SYNCMISS 0x00000010U +#define RCC_CRS_TRIMOVF 0x00000020U +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault + * @{ + */ +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U /*!< The default value is 64, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value + corresponds to a higher output frequency */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL))) + +#if defined(RCC_CCIPR_I2C2SEL) +/** @brief Macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__)) + +/** @brief Macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C2SEL))) +#endif /* RCC_CCIPR_I2C2SEL */ + +/** @brief Macro to configure the I2S1 clock (I2S1CLK). + * + * @param __I2S1_CLKSOURCE__ specifies the I2S1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) +#else +#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** @brief Macro to get the I2S1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL))) +#else +#define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2S1SEL))) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_CCIPR2_I2S2SEL) +/** @brief Macro to configure the I2S2 clock (I2S2CLK). + * + * @param __I2S2_CLKSOURCE__ specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK System Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_PLL PLLP Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_HSI HSI Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_EXT External clock selected as I2S2 clock + */ +#define __HAL_RCC_I2S2_CONFIG(__I2S2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL, (uint32_t)(__I2S2_CLKSOURCE__)) + +/** @brief Macro to get the I2S2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK System Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_PLL PLLP Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_HSI HSI Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_EXT External clock selected as I2S2 clock + */ +#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL))) +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL))) + +#if defined(RCC_CCIPR_USART2SEL) +/** @brief Macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__)) + +/** @brief Macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL))) +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) +/** @brief Macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3_CLKSOURCE__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__)) + +/** @brief Macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART3SEL))) +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(RCC_CCIPR_LPUART1SEL) +/** @brief Macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__)) + +/** @brief Macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL))) +#endif /* RCC_CCIPR_LPUART1SEL */ + +#if defined(RCC_CCIPR_LPUART2SEL) +/** @brief Macro to configure the LPUART2 clock (LPUART2CLK). + * + * @param __LPUART2_CLKSOURCE__ specifies the LPUART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART2CLKSOURCE_PCLK1 PCLK1 selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_HSI HSI selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_SYSCLK System Clock selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_LSE LSE selected as LPUART2 clock + */ +#define __HAL_RCC_LPUART2_CONFIG(__LPUART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART2SEL, (uint32_t)(__LPUART2_CLKSOURCE__)) + +/** @brief Macro to get the LPUART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART2CLKSOURCE_PCLK1 PCLK1 selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_HSI HSI selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_SYSCLK System Clock selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_LSE LSE selected as LPUART2 clock + */ +#define __HAL_RCC_GET_LPUART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART2SEL))) +#endif /* RCC_CCIPR_LPUART2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). + * + * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock + */ +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL))) +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +/** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK). + * + * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + */ +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + */ +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL))) +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(CEC) +/** @brief Macro to configure the CEC clock (CECCLK). + * + * @param __CEC_CLKSOURCE__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, (uint32_t)(__CEC_CLKSOURCE__)) + +/** @brief Macro to get the CEC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 Clock selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_CECSEL))) +#endif /* CEC */ + +#if defined(RNG) +/** @brief Macro to configure the RNG clock. + * + * + * @param __RNG_CLKSOURCE__ specifies the RNG clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divided by 8 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System Clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock + */ +#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, (uint32_t)(__RNG_CLKSOURCE__)) + +/** @brief Macro to get the RNG clock. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divide by 8 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock + */ +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGSEL))) + +/** @brief Macro to configure the RNG clock. + * + * + * @param __RNG_CLKDIV__ specifies the RNG clock division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided + * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 + * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 + * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 + */ +#define __HAL_RCC_RNGDIV_CONFIG(__RNG_CLKDIV__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, (uint32_t)(__RNG_CLKDIV__)) + +/** @brief Macro to get the RNG clock division factor. + * @retval The division factor can be one of the following values: + * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided + * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 + * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 + * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 + */ +#define __HAL_RCC_GET_RNG_DIV() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV))) +#endif /* RNG */ + +/** @brief Macro to configure the ADC interface clock + * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock + */ +#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__)) + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL))) + +#if defined(RCC_CCIPR_TIM1SEL) +/** @brief Macro to configure the TIM1 interface clock + * @param __TIM1_CLKSOURCE__ specifies the TIM1 digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock + * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock + */ +#define __HAL_RCC_TIM1_CONFIG(__TIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM1SEL, (uint32_t)(__TIM1_CLKSOURCE__)) + +/** @brief Macro to get the TIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock + * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock + */ +#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM1SEL))) +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @brief Macro to configure the TIM15 interface clock + * @param __TIM15_CLKSOURCE__ specifies the TIM15 digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock + * @arg RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock + */ +#define __HAL_RCC_TIM15_CONFIG(__TIM15_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM15SEL, (uint32_t)(__TIM15_CLKSOURCE__)) + +/** @brief Macro to get the TIM15 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock + * @arg @ref RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock + */ +#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM15SEL))) +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(RCC_CCIPR2_USBSEL) +/** @brief Macro to configure the USB interface clock + * @param __USB_CLKSOURCE__ specifies the USB digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL PLLQ Output Clock selected as USB clock (*) + * @arg @ref RCC_USBCLKSOURCE_HSE HSE Output Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 Clock selected as USB clock (*) + * (*) Feature not available on all devices + */ +#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, (uint32_t)(__USB_CLKSOURCE__)) + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_HSE HSE Output Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL PLLQ Output Clock selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_USBSEL))) +#endif /* RCC_CCIPR2_USBSEL */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @brief Macro to configure the FDCAN interface clock + * @param __FDCAN_CLKSOURCE__ specifies the FDCAN digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_PLL PLLQ Output Clock selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PCLK1 System Clock selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_HSE HSE Clock selected as FDCAN clock + */ +#define __HAL_RCC_FDCAN_CONFIG(__FDCAN_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, (uint32_t)(__FDCAN_CLKSOURCE__)) + +/** @brief Macro to get the FDCAN clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_FDCANCLKSOURCE_PLL PLLQ Output Clock selected as FDCAN clock + * @arg @ref RCC_FDCANCLKSOURCE_PCLK1 System Clock selected as FDCAN clock + * @arg @ref RCC_FDCANCLKSOURCE_HSE HSE Clock selected as FDCAN clock + */ +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL))) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(CRS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +#endif /* CRS */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after prescaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +#endif /* CRS */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); +void HAL_RCCEx_DisableLSCO(void); + +/** + * @} + */ + +#if defined(CRS) + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ + +#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) + +#if defined(STM32G0C1xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G0B1xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G0B0xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + +#elif defined(STM32G081xx) +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) +#elif defined(STM32G071xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G070xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) + +#elif defined(STM32G061xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G051xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G041xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) + +#elif defined(STM32G031xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) + +#elif defined(STM32G030xx) || defined(STM32G050xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) +#endif /* STM32G0C1xx */ + +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) + +#if defined(RCC_CCIPR_USART2SEL) +#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI)) +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) +#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI)) +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) +#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) +#endif /* LPUART1 */ + +#if defined(LPUART2) +#define IS_RCC_LPUART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_HSI)) +#endif /* LPUART2 */ + +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) + +#if defined(RCC_CCIPR_I2C2SEL) +#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI)) + +#endif /* RCC_CCIPR_I2C2SEL */ + +#define IS_RCC_I2S1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2S1CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_EXT)) + +#if defined(RCC_CCIPR2_I2S2SEL) +#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_EXT)) +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +#define IS_RCC_LPTIM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1)|| \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE)) +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +#define IS_RCC_LPTIM2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1)|| \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_PLLADC) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI)) + +#if defined(RNG) +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_HSI_DIV8) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL)) +#define IS_RCC_RNGDIV(__DIV__) \ + (((__DIV__) == RCC_RNGCLK_DIV1) || \ + ((__DIV__) == RCC_RNGCLK_DIV2) || \ + ((__DIV__) == RCC_RNGCLK_DIV4) || \ + ((__DIV__) == RCC_RNGCLK_DIV8)) +#endif /* RNG */ + +#if defined(CEC) +#define IS_RCC_CECCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_CECCLKSOURCE_HSI_DIV488)|| \ + ((__SOURCE__) == RCC_CECCLKSOURCE_LSE)) +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_RCC_FDCANCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE)|| \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL)|| \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PCLK1)) + +#endif /* FDCAN1 */ + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48)|| \ + ((__SOURCE__) == RCC_USBCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL)) +#else +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSE)|| \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL)) +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_CCIPR_TIM1SEL) +#define IS_RCC_TIM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_TIM1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_TIM1CLKSOURCE_PCLK1)) +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +#define IS_RCC_TIM15CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_TIM15CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_TIM15CLKSOURCE_PCLK1)) +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(CRS) + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x7FU)) + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RCC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h new file mode 100644 index 0000000..4b64977 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h @@ -0,0 +1,2425 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_TIM_H +#define STM32G0xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode + This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode + This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + uint32_t LockLevel; /*!< TIM Lock level + This parameter can be a value of @ref TIM_Lock_level */ + uint32_t DeadTime; /*!< TIM dead Time + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint32_t BreakState; /*!< TIM Break State + This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + uint32_t BreakPolarity; /*!< TIM Break input polarity + This parameter can be a value of @ref TIM_Break_Polarity */ + uint32_t BreakFilter; /*!< Specifies the break input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input. + This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + uint32_t Break2State; /*!< TIM Break2 State + This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + uint32_t Break2Polarity; /*!< TIM Break2 input polarity + This parameter can be a value of @ref TIM_Break2_Polarity */ + uint32_t Break2Filter; /*!< TIM break2 input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input. + This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */ + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x10000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x20000000U /*!< OCREF_CLR is connected to ETRF input */ +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define TIM_CLEARINPUTSOURCE_COMP1 0x00000000U /*!< OCREF_CLR_INT is connected to COMP1 output */ +#define TIM_CLEARINPUTSOURCE_COMP2 TIM1_OR1_OCREF_CLR_0 /*!< OCREF_CLR_INT is connected to COMP2 output */ +#define TIM_CLEARINPUTSOURCE_COMP3 TIM1_OR1_OCREF_CLR_1 /*!< OCREF_CLR_INT is connected to COMP3 output */ +#elif defined(COMP1) && defined(COMP2) +#define TIM_CLEARINPUTSOURCE_COMP1 0x00000000U /*!< OCREF_CLR_INT is connected to COMP1 output */ +#define TIM_CLEARINPUTSOURCE_COMP2 TIM1_OR1_OCREF_CLR /*!< OCREF_CLR_INT is connected to COMP2 output */ +#endif /* COMP1 && COMP2 && COMP3 */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_OR1 0x00000014U +#define TIM_DMABASE_CCMR3 0x00000015U +#define TIM_DMABASE_CCR5 0x00000016U +#define TIM_DMABASE_CCR6 0x00000017U +#define TIM_DMABASE_AF1 0x00000018U +#define TIM_DMABASE_AF2 0x00000019U +#define TIM_DMABASE_TISEL 0x0000001AU +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#if defined(USB_BASE) +#define TIM_CLOCKSOURCE_ITR7 TIM_TS_ITR7 /*!< External clock source mode 1 (ITR7) */ +#endif /* USB_BASE */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_AF_Mode TIM Break2 Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK2_AFMODE_INPUT 0x00000000U /*!< Break2 input BRK2 in input mode */ +#define TIM_BREAK2_AFMODE_BIDIRECTIONAL TIM_BDTR_BK2BID /*!< Break2 input BRK2 in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event + (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASSYMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#if defined(USB_BASE) +#define TIM_TS_ITR7 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 7 (ITR7) */ +#endif /* USB_BASE */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#define TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder +mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP1) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP2) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP3) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#elif defined(COMP1) && defined(COMP2) +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP1) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP2) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#else +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#endif /* COMP1 && COMP2 && COMP3 */ + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_OR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ + ((__BASE__) == TIM_DMABASE_AF2) || \ + ((__BASE__) == TIM_DMABASE_TISEL)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENALE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) + +#define IS_TIM_BREAK2_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK2_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#if defined(USB_BASE) +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#else +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#endif /* USB_BASE */ + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#if defined(PWR_PVD_SUPPORT) +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#else +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#endif /* PWR_PVD_SUPPORT */ + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32g0xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h new file mode 100644 index 0000000..f62d821 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h @@ -0,0 +1,496 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_TIM_EX_H +#define STM32G0xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */ +} +TIMEx_BreakInputConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */ +#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_AF1_ETRSEL_2 /* !< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */ +#if defined(COMP3) +#define TIM_TIM1_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM1_ETR is connected to COMP3 output */ +#endif +#if defined(TIM2) +#define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */ +#define TIM_TIM2_ETR_COMP1 TIM2_AF1_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */ +#define TIM_TIM2_ETR_COMP2 TIM2_AF1_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */ +#define TIM_TIM2_ETR_LSE (TIM2_AF1_ETRSEL_1 | TIM2_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to LSE */ +#if defined(COMP3) +#define TIM_TIM2_ETR_MCO TIM2_AF1_ETRSEL_2 /* !< TIM2_ETR is connected to MCO */ +#define TIM_TIM2_ETR_MCO2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to MCO2 */ +#define TIM_TIM2_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM2_ETR is connected to COMP3 output */ +#endif +#endif /* TIM2 */ +#if defined(TIM3) +#define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 output */ +#define TIM_TIM3_ETR_COMP2 TIM3_AF1_ETRSEL_1 /* !< TIM3_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_TIM3_ETR_COMP3 (TIM3_AF1_ETRSEL_1 | TIM3_AF1_ETRSEL_0) /* !< TIM3_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#endif /* TIM3 */ +#if defined(TIM4) +#define TIM_TIM4_ETR_GPIO 0x00000000U /* !< TIM4_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM4_ETR_COMP1 TIM4_AF1_ETRSEL_0 /* !< TIM4_ETR is connected to COMP1 output */ +#define TIM_TIM4_ETR_COMP2 TIM4_AF1_ETRSEL_1 /* !< TIM4_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_TIM4_ETR_COMP3 (TIM4_AF1_ETRSEL_1 | TIM4_AF1_ETRSEL_0) /* !< TIM4_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#endif /* TIM4 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /* !< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /* !< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */ +#if defined(COMP1) && defined(COMP2) +#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_BREAKINPUTSOURCE_COMP3 0x00000008U /* !< The COMP3 output is connected to the break input */ +#endif /* COMP3 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /* !< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /* !< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /* !< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /* !< Break input source is active_high */ +/** + * @} + */ + +/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection + * @{ + */ +#define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM1_TI1_COMP1 0x00000001U /* !< TIM1_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM1_TI2_GPIO 0x00000000U /* !< TIM1_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM1_TI2_COMP2 0x00000100U /* !< TIM1_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM1_TI3_GPIO 0x00000000U /* !< TIM1_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM1_TI3_COMP3 0x00010000U /* !< TIM1_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ + +#if defined(TIM2) +#define TIM_TIM2_TI1_GPIO 0x00000000U /* !< TIM2_TI1 is connected to GPIO */ +#define TIM_TIM2_TI1_COMP1 0x00000001U /* !< TIM2_TI1 is connected to COMP1 OUT */ + +#define TIM_TIM2_TI2_GPIO 0x00000000U /* !< TIM2_TI2 is connected to GPIO */ +#define TIM_TIM2_TI2_COMP2 0x00000100U /* !< TIM2_TI2 is connected to COMP2 OUT */ + +#define TIM_TIM2_TI3_GPIO 0x00000000U /* !< TIM2_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM2_TI3_COMP3 0x00010000U /* !< TIM2_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ +#endif /* TIM2 */ + +#define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM3_TI1_COMP1 0x00000001U /* !< TIM3_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM3_TI2_GPIO 0x00000000U /* !< TIM3_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM3_TI2_COMP2 0x00000100U /* !< TIM3_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM3_TI3_GPIO 0x00000000U /* !< TIM3_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM3_TI3_COMP3 0x00010000U /* !< TIM3_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ + +#if defined(TIM4) +#define TIM_TIM4_TI1_GPIO 0x00000000U /* !< TIM4_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM4_TI1_COMP1 0x00000001U /* !< TIM4_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM4_TI2_GPIO 0x00000000U /* !< TIM4_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM4_TI2_COMP2 0x00000100U /* !< TIM4_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM4_TI3_GPIO 0x00000000U /* !< TIM4_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM4_TI3_COMP3 0x00010000U /* !< TIM4_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ +#endif /* TIM4 */ + +#define TIM_TIM14_TI1_GPIO 0x00000000U /* !< TIM14_TI1 is connected to GPIO */ +#define TIM_TIM14_TI1_RTC 0x00000001U /* !< TIM14_TI1 is connected to RTC clock */ +#define TIM_TIM14_TI1_HSE_32 0x00000002U /* !< TIM14_TI1 is connected to HSE div 32 */ +#define TIM_TIM14_TI1_MCO 0x00000003U /* !< TIM14_TI1 is connected to MCO */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM14_TI1_MCO2 0x00000004U /* !< TIM14_TI1 is connected to MCO2 */ +#endif + +#if defined(TIM15) +#define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15_TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_TIM2_CH1 0x00000001U /* !< TIM15_TI1 is connected to TIM2 CH1 */ +#define TIM_TIM15_TI1_TIM3_CH1 0x00000002U /* !< TIM15_TI1 is connected to TIM3 CH1 */ + +#define TIM_TIM15_TI2_GPIO 0x00000000U /* !< TIM15_TI2 is connected to GPIO */ +#define TIM_TIM15_TI2_TIM2_CH2 0x00000100U /* !< TIM15_TI2 is connected to TIM2 CH2 */ +#define TIM_TIM15_TI2_TIM3_CH2 0x00000200U /* !< TIM15_TI2 is connected to TIM3 CH2 */ +#endif /* TIM15 */ + +#define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16_TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_LSI 0x00000001U /* !< TIM16_TI1 is connected to LSI */ +#define TIM_TIM16_TI1_LSE 0x00000002U /* !< TIM16_TI1 is connected to LSE */ +#define TIM_TIM16_TI1_RTC_WAKEUP 0x00000003U /* !< TIM16_TI1 is connected to TRC wakeup interrupt */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM16_TI1_MCO2 0x00000004U /* !< TIM16_TI1 is connected to MCO2 */ +#endif + +#define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17_TI1 is connected to GPIO */ +#if defined(RCC_HSI48_SUPPORT) +#define TIM_TIM17_TI1_HSI48 0x00000001U /* !< TIM17_TI1 is connected to HSI48/256 */ +#endif +#define TIM_TIM17_TI1_HSE_32 0x00000002U /* !< TIM17_TI1 is connected to HSE div 32 */ +#define TIM_TIM17_TI1_MCO 0x00000003U /* !< TIM17_TI1 is connected to MCO */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM17_TI1_MCO2 0x00000004U /* !< TIM17_TI1 is connected to MCO2 */ +#endif +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__REMAP__) ((((__REMAP__) & 0xFFFC3FFFU) == 0x00000000U)) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP3)) +#elif defined(COMP1) && defined(COMP2) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) +#else +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) +#endif /* COMP1 && COMP2 && COMP3 */ + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h new file mode 100644 index 0000000..f6b0a37 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h @@ -0,0 +1,1718 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_UART_H +#define STM32G0xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + LPUART: + ======= + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock divided by a prescaler + UART: + ===== + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * It is expected to admit following values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +/** @brief Get UART clok division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on G0 (i.e. 64 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 8000001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32g0xx_hal_uart_ex.h" + + +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_UART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h new file mode 100644 index 0000000..a18e78c --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h @@ -0,0 +1,770 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_UART_EX_H +#define STM32G0xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART2) \ + { \ + switch(__HAL_RCC_GET_LPUART2_SOURCE()) \ + { \ + case RCC_LPUART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G0B0xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G081xx) || defined(STM32G071xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G070xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G051xx) || defined(STM32G061xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G030xx) || defined(STM32G050xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_UART_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h new file mode 100644 index 0000000..86d7913 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h @@ -0,0 +1,5164 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_adc.h + * @author MCD Application Team + * @brief Header file of ADC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_ADC_H +#define STM32G0xx_LL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @defgroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Constants ADC Private Constants + * @{ + */ + +/* Internal mask for ADC group regular sequencer: */ +/* To select into literal LL_ADC_REG_RANK_x the relevant bits for: */ +/* - sequencer rank bits position into the selected register */ + +#define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) + +/* Definition of ADC group regular sequencer bits information to be inserted */ +/* into ADC group regular sequencer ranks literals definition. */ +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ1" position in register */ +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ2" position in register */ +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ3" position in register */ +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ4" position in register */ +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ5" position in register */ +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ6" position in register */ +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ7" position in register */ +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (28UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ8" position in register */ + + + +/* Internal mask for ADC group regular trigger: */ +/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */ +/* - regular trigger source */ +/* - regular trigger edge */ +#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CFGR1_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTSEL) << (4U * 0UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 1UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 2UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 3UL)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN) << (4U * 0UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 1UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 2UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 3UL)) ) + +/* Definition of ADC group regular trigger bits information. */ +#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTSEL" position in register */ +#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTEN" position in register */ + + + +/* Internal mask for ADC channel: */ +/* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */ +/* - channel identifier defined by number */ +/* - channel identifier defined by bitfield */ +/* - channel differentiation between external channels (connected to */ +/* GPIO pins) and internal channels (connected to internal paths) */ +#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR1_AWD1CH) +#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_CHSELR_CHSEL) +#define ADC_CHANNEL_ID_NUMBER_MASK_SEQ (ADC_CHSELR_SQ1 << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) /* Value equivalent to ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer, if set to mode "fully configurable", can contain channels with a restricted channel number. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). */ +#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)/* Value equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" position in register */ +#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK | \ + ADC_CHANNEL_ID_INTERNAL_CH_MASK) +/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ +#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (0x0000001FUL) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */ + +/* Channel differentiation between external and internal channels */ +#define ADC_CHANNEL_ID_INTERNAL_CH (0x80000000UL) /* Marker of internal channel */ +#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH) + +/* Definition of channels ID number information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_NUMBER (0x00000000UL) +#define ADC_CHANNEL_1_NUMBER (ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_2_NUMBER (ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_3_NUMBER (ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_4_NUMBER (ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_5_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_6_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_7_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_8_NUMBER (ADC_CFGR1_AWD1CH_3) +#define ADC_CHANNEL_9_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_10_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_11_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_12_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_13_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_14_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_15_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | \ + ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_16_NUMBER (ADC_CFGR1_AWD1CH_4) +#define ADC_CHANNEL_17_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_18_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_1) + +/* Definition of channels ID bitfield information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_BITFIELD (ADC_CHSELR_CHSEL0) +#define ADC_CHANNEL_1_BITFIELD (ADC_CHSELR_CHSEL1) +#define ADC_CHANNEL_2_BITFIELD (ADC_CHSELR_CHSEL2) +#define ADC_CHANNEL_3_BITFIELD (ADC_CHSELR_CHSEL3) +#define ADC_CHANNEL_4_BITFIELD (ADC_CHSELR_CHSEL4) +#define ADC_CHANNEL_5_BITFIELD (ADC_CHSELR_CHSEL5) +#define ADC_CHANNEL_6_BITFIELD (ADC_CHSELR_CHSEL6) +#define ADC_CHANNEL_7_BITFIELD (ADC_CHSELR_CHSEL7) +#define ADC_CHANNEL_8_BITFIELD (ADC_CHSELR_CHSEL8) +#define ADC_CHANNEL_9_BITFIELD (ADC_CHSELR_CHSEL9) +#define ADC_CHANNEL_10_BITFIELD (ADC_CHSELR_CHSEL10) +#define ADC_CHANNEL_11_BITFIELD (ADC_CHSELR_CHSEL11) +#define ADC_CHANNEL_12_BITFIELD (ADC_CHSELR_CHSEL12) +#define ADC_CHANNEL_13_BITFIELD (ADC_CHSELR_CHSEL13) +#define ADC_CHANNEL_14_BITFIELD (ADC_CHSELR_CHSEL14) +#define ADC_CHANNEL_15_BITFIELD (ADC_CHSELR_CHSEL15) +#define ADC_CHANNEL_16_BITFIELD (ADC_CHSELR_CHSEL16) +#define ADC_CHANNEL_17_BITFIELD (ADC_CHSELR_CHSEL17) +#define ADC_CHANNEL_18_BITFIELD (ADC_CHSELR_CHSEL18) + +/* Internal mask for ADC channel sampling time: */ +/* To select into literals LL_ADC_SAMPLINGTIME_x */ +/* the relevant bits for: */ +/* (concatenation of multiple bits used in register SMPR) */ +/* - ADC channels sampling time: setting channel wise, to map each channel */ +/* on one of the common sampling time available. */ +/* - ADC channels common sampling time: set a sampling time into one of the */ +/* common sampling time available. */ +#define ADC_SAMPLING_TIME_CH_MASK (ADC_CHANNEL_ID_BITFIELD_MASK << ADC_SMPR_SMPSEL0_BITOFFSET_POS) +#define ADC_SAMPLING_TIME_SMP_MASK (ADC_SMPR_SMP2 | ADC_SMPR_SMP1) +#define ADC_SAMPLING_TIME_SMP_SHIFT_MASK (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SMPR_SMP1_BITOFFSET_POS) + +/* Internal mask for ADC analog watchdog: */ +/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */ +/* (concatenation of multiple bits used in different analog watchdogs, */ +/* (feature of several watchdogs not available on all STM32 families)). */ +/* - analog watchdog 1: monitored channel defined by number, */ +/* selection of ADC group (ADC group regular). */ +/* - analog watchdog 2 and 3: monitored channel defined by bitfield, no */ +/* selection on groups. */ + +/* Internal register offset for ADC analog watchdog channel configuration */ +#define ADC_AWD_CR1_REGOFFSET (0x00000000UL) +#define ADC_AWD_CR2_REGOFFSET (0x00100000UL) +#define ADC_AWD_CR3_REGOFFSET (0x00200000UL) + +/* Register offset gap between AWD1 and AWD2-AWD3 configuration registers */ +/* (Set separately as ADC_AWD_CRX_REGOFFSET to spare 32 bits space */ +#define ADC_AWD_CR12_REGOFFSETGAP_MASK (ADC_AWD2CR_AWD2CH_0) +#define ADC_AWD_CR12_REGOFFSETGAP_VAL (0x00000024UL) + +#define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET | ADC_AWD_CR2_REGOFFSET | ADC_AWD_CR3_REGOFFSET) +#define ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS (20UL) + +#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) +#define ADC_AWD_CR23_CHANNEL_MASK (ADC_AWD2CR_AWD2CH) +#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR23_CHANNEL_MASK) + +#define ADC_AWD_CRX_REGOFFSET_POS (20UL) /* Position of bits ADC_AWD_CRx_REGOFFSET in ADC_AWD_CRX_REGOFFSET_MASK */ + +/* Internal register offset for ADC analog watchdog threshold configuration */ +#define ADC_AWD_TR1_REGOFFSET (ADC_AWD_CR1_REGOFFSET) +#define ADC_AWD_TR2_REGOFFSET (ADC_AWD_CR2_REGOFFSET) +#define ADC_AWD_TR3_REGOFFSET (ADC_AWD_CR3_REGOFFSET + (1UL << ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS)) +#define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_REGOFFSET | ADC_AWD_TR2_REGOFFSET | ADC_AWD_TR3_REGOFFSET) +#define ADC_AWD_TRX_REGOFFSET_POS (ADC_AWD_CRX_REGOFFSET_POS) /* Position of bits ADC_SQRx_REGOFFSET in ADC_AWD_TRX_REGOFFSET_MASK */ +#define ADC_AWD_TRX_BIT_HIGH_MASK (0x00010000UL) /* Selection of 1 bit to discriminate threshold high: mask of bit */ +#define ADC_AWD_TRX_BIT_HIGH_POS (16UL) /* Selection of 1 bit to discriminate threshold high: position of bit */ +#define ADC_AWD_TRX_BIT_HIGH_SHIFT4 (ADC_AWD_TRX_BIT_HIGH_POS - 4UL) /* Shift of bit ADC_AWD_TRX_BIT_HIGH to position to perform a shift of 4 ranks */ +#define ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS (20UL) + + + +/* ADC registers bits positions */ +#define ADC_CFGR1_RES_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CFGR1_RES" position in register */ +#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22UL) /* Value equivalent to bitfield "ADC_CFGR1_AWDSGL" position in register */ +#define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_TR1_HT1" position in register */ +#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL0" position in register */ +#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL1" position in register */ +#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL2" position in register */ +#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL3" position in register */ +#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL4" position in register */ +#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL5" position in register */ +#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL6" position in register */ +#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL7" position in register */ +#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL8" position in register */ +#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL9" position in register */ +#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL10" position in register */ +#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL11" position in register */ +#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL12" position in register */ +#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL13" position in register */ +#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL14" position in register */ +#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL15" position in register */ +#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL16" position in register */ +#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL17" position in register */ +#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL18" position in register */ +#define ADC_SMPR_SMP1_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SMPR_SMP1" position in register */ +#define ADC_SMPR_SMP2_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_SMPR_SMP2" position in register */ +#define ADC_SMPR_SMPSEL0_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_SMPR_SMPSEL0" position in register */ + + +/* ADC registers bits groups */ +#define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": Software can read as well as set this bit. Writing '0' has no effect on the bit value. */ + + +/* ADC internal channels related definitions */ +/* Internal voltage reference VrefInt */ +#define VREFINT_CAL_ADDR ((uint16_t*) (0x1FFF75AAUL)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define VREFINT_CAL_VREF ( 3000UL) /* Analog voltage reference (Vref+) voltage with which VrefInt has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ +/* Temperature sensor */ +#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) (0x1FFF75A8UL)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32G0, temperature sensor ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL2_ADDR ((uint16_t*) (0x1FFF75CAUL)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32G0, temperature sensor ADC raw data acquired at temperature 130 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL1_TEMP (( int32_t) 30) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL2_TEMP (( int32_t) 130) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL_VREFANALOG ( 3000UL) /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Macros ADC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of ADC common parameters + * and multimode + * (all ADC instances belonging to the same ADC common instance). + * @note The setting of these parameters by function @ref LL_ADC_CommonInit() + * is conditioned to ADC instances state (all ADC instances + * sharing the same ADC common instance): + * All ADC instances sharing the same ADC common instance must be + * disabled. + */ +typedef struct +{ + uint32_t CommonClock; /*!< Set parameter common to several ADC: Clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetCommonClock(). */ + +} LL_ADC_CommonInitTypeDef; + +/** + * @brief Structure definition of some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t Clock; /*!< Set ADC instance clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_CLOCK_SOURCE + @note On this STM32 series, this parameter has some clock ratio constraints: + ADC clock synchronous (from PCLK) with prescaler 1 must be enabled only if PCLK has a 50% duty clock cycle + (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle). + + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetClock(). + For more details, refer to description of this function. */ + + uint32_t Resolution; /*!< Set ADC resolution. + This parameter can be a value of @ref ADC_LL_EC_RESOLUTION + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */ + + uint32_t DataAlignment; /*!< Set ADC conversion data alignment. + This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetDataAlignment(). */ + + uint32_t LowPowerMode; /*!< Set ADC low power mode. + This parameter can be a value of @ref ADC_LL_EC_LP_MODE + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetLowPowerMode(). */ + +} LL_ADC_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_REG_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external peripheral (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE + @note On this STM32 series, setting trigger source to external trigger also set trigger polarity to rising edge + (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value). + In case of need to modify trigger edge, use function @ref LL_ADC_REG_SetTriggerEdge(). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group regular sequencer length. + @note This parameter has an effect only if group regular sequencer is set to mode "fully configurable". Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE + @note This parameter has an effect only if group regular sequencer is enabled + (depending on the sequencer mode: scan length of 2 ranks or more, or several ADC channels enabled in group regular sequencer. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable() ). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerDiscont(). */ + + uint32_t ContinuousMode; /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically). + This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE + Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode. + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetContinuousMode(). */ + + uint32_t DMATransfer; /*!< Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode. + This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetDMATransfer(). */ + + uint32_t Overrun; /*!< Set ADC group regular behavior in case of overrun: + data preserved or overwritten. + This parameter can be a value of @ref ADC_LL_EC_REG_OVR_DATA_BEHAVIOR + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetOverrun(). */ + +} LL_ADC_REG_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_LL_EC_FLAG ADC flags + * @brief Flags defines which can be used with LL_ADC_ReadReg function + * @{ + */ +#define LL_ADC_FLAG_ADRDY ADC_ISR_ADRDY /*!< ADC flag ADC instance ready */ +#define LL_ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC flag ADC channel configuration ready */ +#define LL_ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC flag ADC group regular end of unitary conversion */ +#define LL_ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC flag ADC group regular end of sequence conversions */ +#define LL_ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC flag ADC group regular overrun */ +#define LL_ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC flag ADC group regular end of sampling phase */ +#define LL_ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC flag ADC analog watchdog 1 */ +#define LL_ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC flag ADC analog watchdog 2 */ +#define LL_ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC flag ADC analog watchdog 3 */ +#define LL_ADC_FLAG_EOCAL ADC_ISR_EOCAL /*!< ADC flag end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable) + * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions + * @{ + */ +#define LL_ADC_IT_ADRDY ADC_IER_ADRDYIE /*!< ADC interruption ADC instance ready */ +#define LL_ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC interruption channel configuration ready */ +#define LL_ADC_IT_EOC ADC_IER_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion */ +#define LL_ADC_IT_EOS ADC_IER_EOSIE /*!< ADC interruption ADC group regular end of sequence conversions */ +#define LL_ADC_IT_OVR ADC_IER_OVRIE /*!< ADC interruption ADC group regular overrun */ +#define LL_ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC interruption ADC group regular end of sampling phase */ +#define LL_ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC interruption ADC analog watchdog 1 */ +#define LL_ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC interruption ADC analog watchdog 2 */ +#define LL_ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC interruption ADC analog watchdog 3 */ +#define LL_ADC_IT_EOCAL ADC_IER_EOCALIE /*!< ADC interruption ADC end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REGISTERS ADC registers compliant with specific purpose + * @{ + */ +/* List of ADC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */ +#define LL_ADC_DMA_REG_REGULAR_DATA (0x00000000UL) /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define LL_ADC_CLOCK_ASYNC_DIV1 (0x00000000UL) /*!< ADC asynchronous clock without prescaler */ +#define LL_ADC_CLOCK_ASYNC_DIV2 (ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 2. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV4 (ADC_CCR_PRESC_1 ) /*!< ADC asynchronous clock with prescaler division by 4. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV6 (ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 6. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV8 (ADC_CCR_PRESC_2 ) /*!< ADC asynchronous clock with prescaler division by 8. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV10 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 10. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV12 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 ) /*!< ADC asynchronous clock with prescaler division by 12. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV16 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 16. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV32 (ADC_CCR_PRESC_3) /*!< ADC asynchronous clock with prescaler division by 32. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV64 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 64. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV128 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with prescaler division by 128. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV256 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 256. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_FREQ_MODE ADC common - Clock frequency mode + * @{ + */ +#define LL_ADC_CLOCK_FREQ_MODE_HIGH (0x00000000UL) /*!< ADC clock mode to high frequency. On STM32G0, ADC clock frequency above 3.5MHz. */ +#define LL_ADC_CLOCK_FREQ_MODE_LOW (ADC_CCR_LFMEN) /*!< ADC clock mode to low frequency. On STM32G0, ADC clock frequency below 3.5MHz. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels + * @{ + */ +/* Note: Other measurement paths to internal channels may be available */ +/* (connections to other peripherals). */ +/* If they are not listed below, they do not require any specific */ +/* path enable. In this case, Access to measurement path is done */ +/* only by selecting the corresponding ADC internal channel. */ +#define LL_ADC_PATH_INTERNAL_NONE (0x00000000UL) /*!< ADC measurement paths all disabled */ +#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_VREFEN) /*!< ADC measurement path to internal channel VrefInt */ +#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSEN) /*!< ADC measurement path to internal channel temperature sensor */ +#define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATEN) /*!< ADC measurement path to internal channel Vbat */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CLOCK_SOURCE ADC instance - Clock source + * @{ + */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by 4 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by 2 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV1 (ADC_CFGR2_CKMODE_1 | ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock not divided */ +#define LL_ADC_CLOCK_ASYNC (0x00000000UL) /*!< ADC asynchronous clock. Asynchronous clock prescaler can be configured using function @ref LL_ADC_SetCommonClock(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define LL_ADC_RESOLUTION_12B (0x00000000UL) /*!< ADC resolution 12 bits */ +#define LL_ADC_RESOLUTION_10B ( ADC_CFGR1_RES_0) /*!< ADC resolution 10 bits */ +#define LL_ADC_RESOLUTION_8B (ADC_CFGR1_RES_1 ) /*!< ADC resolution 8 bits */ +#define LL_ADC_RESOLUTION_6B (ADC_CFGR1_RES_1 | ADC_CFGR1_RES_0) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment + * @{ + */ +#define LL_ADC_DATA_ALIGN_RIGHT (0x00000000UL) /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR1_ALIGN) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_LP_MODE ADC instance - Low power mode + * @{ + */ +#define LL_ADC_LP_MODE_NONE (0x00000000UL) /*!< No ADC low power mode activated */ +#define LL_ADC_LP_AUTOWAIT (ADC_CFGR1_WAIT) /*!< ADC low power mode auto delay: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOPOWEROFF (ADC_CFGR1_AUTOFF) /*!< ADC low power mode auto power-off: the ADC automatically powers-off after a ADC conversion and automatically wakes up when a new ADC conversion is triggered (with startup time between trigger and start of sampling). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF) /*!< ADC low power modes auto wait and auto power-off combined. See description with function @ref LL_ADC_SetLowPowerMode(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define LL_ADC_TRIGGER_FREQ_HIGH (0x00000000UL) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define LL_ADC_TRIGGER_FREQ_LOW (ADC_CFGR2_LFTRIG) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define LL_ADC_SAMPLINGTIME_COMMON_1 (ADC_SMPR_SMP1_BITOFFSET_POS) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define LL_ADC_SAMPLINGTIME_COMMON_2 (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SAMPLING_TIME_CH_MASK) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define LL_ADC_GROUP_REGULAR (0x00000001UL) /*!< ADC group regular (available on all STM32 devices) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ +#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ +#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ +#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER | ADC_CHANNEL_3_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */ +#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER | ADC_CHANNEL_4_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */ +#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER | ADC_CHANNEL_5_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */ +#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER | ADC_CHANNEL_6_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */ +#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER | ADC_CHANNEL_7_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */ +#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER | ADC_CHANNEL_8_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */ +#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER | ADC_CHANNEL_9_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */ +#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */ +#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */ +#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */ +#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */ +#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */ +#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ +#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ +#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ +#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_13 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_12 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. */ +#define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_14 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source + * @{ + */ +#define LL_ADC_REG_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group regular conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 ( ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH4 ( ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#if defined(TIM2) +#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#if defined(TIM4) +#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM6) +#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM15) +#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge + * @{ + */ +#define LL_ADC_REG_TRIG_EXT_RISING ( ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to rising edge */ +#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CFGR1_EXTEN_1 ) /*!< ADC group regular conversion trigger polarity set to falling edge */ +#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CFGR1_EXTEN_1 | ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode + * @{ + */ +#define LL_ADC_REG_CONV_SINGLE (0x00000000UL) /*!< ADC conversions are performed in single mode: one conversion per trigger */ +#define LL_ADC_REG_CONV_CONTINUOUS (ADC_CFGR1_CONT) /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data + * @{ + */ +#define LL_ADC_REG_DMA_TRANSFER_NONE (0x00000000UL) /*!< ADC conversions are not transferred by DMA */ +#define LL_ADC_REG_DMA_TRANSFER_LIMITED ( ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */ +#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define LL_ADC_REG_OVR_DATA_PRESERVED (0x00000000UL) /*!< ADC group regular behavior in case of overrun: data preserved */ +#define LL_ADC_REG_OVR_DATA_OVERWRITTEN (ADC_CFGR1_OVRMOD) /*!< ADC group regular behavior in case of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_MODE ADC group regular - Sequencer configuration flexibility + * @{ + */ +#define LL_ADC_REG_SEQ_FIXED (0x00000000UL) /*!< Sequencer configured to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number. Refer to description of function @ref LL_ADC_REG_SetSequencerChannels(). */ +#define LL_ADC_REG_SEQ_CONFIGURABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer configured to fully configurable: sequencer length and each rank affectation to a channel are configurable. Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DISABLE (ADC_CHSELR_SQ2) /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS (ADC_CHSELR_SQ3) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS (ADC_CHSELR_SQ4) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS (ADC_CHSELR_SQ5) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS (ADC_CHSELR_SQ6) /*!< ADC group regular sequencer enable with 5 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS (ADC_CHSELR_SQ7) /*!< ADC group regular sequencer enable with 6 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS (ADC_CHSELR_SQ8) /*!< ADC group regular sequencer enable with 7 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS (0x00000000UL) /*!< ADC group regular sequencer enable with 8 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_DIRECTION ADC group regular - Sequencer scan direction + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DIR_FORWARD (0x00000000UL) /*!< On this STM32 series, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction forward: from lowest channel number to highest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer). On some other STM32 families, this setting is not available and the default scan direction is forward. */ +#define LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD (ADC_CFGR1_SCANDIR) /*!< On this STM32 series, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction backward: from highest channel number to lowest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_REG_SEQ_DISCONT_DISABLE (0x00000000UL) /*!< ADC group regular sequencer discontinuous mode disable */ +#define LL_ADC_REG_SEQ_DISCONT_1RANK (ADC_CFGR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define LL_ADC_REG_RANK_1 (ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 1 */ +#define LL_ADC_REG_RANK_2 (ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 2 */ +#define LL_ADC_REG_RANK_3 (ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 3 */ +#define LL_ADC_REG_RANK_4 (ADC_REG_RANK_4_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 4 */ +#define LL_ADC_REG_RANK_5 (ADC_REG_RANK_5_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 5 */ +#define LL_ADC_REG_RANK_6 (ADC_REG_RANK_6_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 6 */ +#define LL_ADC_REG_RANK_7 (ADC_REG_RANK_7_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 7 */ +#define LL_ADC_REG_RANK_8 (ADC_REG_RANK_8_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define LL_ADC_SAMPLINGTIME_1CYCLE_5 (0x00000000UL) /*!< Sampling time 1.5 ADC clock cycle */ +#define LL_ADC_SAMPLINGTIME_3CYCLES_5 (ADC_SMPR_SMP1_0) /*!< Sampling time 3.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_7CYCLES_5 (ADC_SMPR_SMP1_1) /*!< Sampling time 7.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_12CYCLES_5 (ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 12.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_19CYCLES_5 (ADC_SMPR_SMP1_2) /*!< Sampling time 19.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_39CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_0) /*!< Sampling time 39.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_79CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1) /*!< Sampling time 79.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_160CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */ +#define LL_ADC_AWD2 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */ +#define LL_ADC_AWD3 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels + * @{ + */ +#define LL_ADC_AWD_DISABLE (0x00000000UL) /*!< ADC analog watchdog monitoring disabled */ +#define LL_ADC_AWD_ALL_CHANNELS_REG (ADC_AWD_CR23_CHANNEL_MASK | ADC_CFGR1_AWD1EN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */ +#define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds + * @{ + */ +#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_TR1_HT1 ) /*!< ADC analog watchdog threshold high */ +#define LL_ADC_AWD_THRESHOLD_LOW ( ADC_TR1_LT1) /*!< ADC analog watchdog threshold low */ +#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_TR1_HT1 | ADC_TR1_LT1) /*!< ADC analog watchdog both thresholds high and low concatenated into the same data */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SCOPE Oversampling - Oversampling scope + * @{ + */ +#define LL_ADC_OVS_DISABLE (0x00000000UL) /*!< ADC oversampling disabled. */ +#define LL_ADC_OVS_GRP_REGULAR_CONTINUED ( ADC_CFGR2_OVSE) /*!< ADC oversampling on conversions of ADC group regular. Literal suffix "continued" is kept for compatibility with other STM32 devices featuring ADC group injected, in this case other oversampling scope parameters are available. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define LL_ADC_OVS_REG_CONT (0x00000000UL) /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */ +#define LL_ADC_OVS_REG_DISCONT (ADC_CFGR2_TOVS) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define LL_ADC_OVS_RATIO_2 (0x00000000UL) /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_4 ( ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_8 ( ADC_CFGR2_OVSR_1 ) /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_16 ( ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_32 (ADC_CFGR2_OVSR_2 ) /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_64 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_128 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 ) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_256 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +#define LL_ADC_OVS_SHIFT_NONE (0x00000000UL) /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_1 ( ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_2 ( ADC_CFGR2_OVSS_1 ) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_3 ( ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_4 ( ADC_CFGR2_OVSS_2 ) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_5 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_6 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 ) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_7 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_8 (ADC_CFGR2_OVSS_3 ) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HELPER_MACRO Definitions of constants used by helper macro + * @{ + */ +#define LL_ADC_TEMPERATURE_CALC_ERROR ((int16_t)0x7FFF) /* Temperature calculation error using helper macro @ref __LL_ADC_CALC_TEMPERATURE(), due to issue on calibration parameters. This value is coded on 16 bits (to fit on signed word or double word) and corresponds to an inconsistent temperature value. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HW_DELAYS Definitions of ADC hardware constraints delays + * @note Only ADC peripheral HW delays are defined in ADC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values. */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Indications for estimation of ADC timeout delays, for this */ +/* STM32 series: */ +/* - ADC calibration time: maximum delay is 82/fADC. */ +/* (refer to device datasheet, parameter "tCAL") */ +/* - ADC enable time: maximum delay is 1 conversion cycle. */ +/* (refer to device datasheet, parameter "tSTAB") */ +/* - ADC disable time: maximum delay should be a few ADC clock cycles */ +/* - ADC stop conversion time: maximum delay should be a few ADC clock */ +/* cycles */ +/* - ADC conversion time: duration depending on ADC clock and ADC */ +/* configuration. */ +/* (refer to device reference manual, section "Timing") */ + +/* Delay for ADC stabilization time (ADC voltage regulator start-up time) */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tADCVREG_STUP"). */ +/* Unit: us */ +#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL) /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */ + +/* Delay for internal voltage reference stabilization time. */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tstart_vrefint"). */ +/* Unit: us */ +#define LL_ADC_DELAY_VREFINT_STAB_US ( 12UL) /*!< Delay for internal voltage reference stabilization time */ + +/* Delay for temperature sensor stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (120UL) /*!< Delay for temperature sensor stabilization time (starting from temperature sensor enable, refer to @ref LL_ADC_SetCommonPathInternalCh()) */ +#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL) /*!< Delay for temperature sensor buffer stabilization time (starting from ADC enable, refer to @ref LL_ADC_Enable()) */ + +/* Delay required between ADC end of calibration and ADC enable. */ +/* Note: On this STM32 series, a minimum number of ADC clock cycles */ +/* are required between ADC end of calibration and ADC enable. */ +/* Wait time can be computed in user application by waiting for the */ +/* equivalent number of CPU cycles, by taking into account */ +/* ratio of CPU clock versus ADC clock prescalers. */ +/* Unit: ADC clock cycles. */ +#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES ( 2UL) /*!< Delay required between ADC end of calibration and ADC enable */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals LL_ADC_CHANNEL_x. + * @note Example: + * __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((((__CHANNEL__) & ADC_CHANNEL_ID_BITFIELD_MASK) == 0UL) ? \ + ( \ + ((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS \ + ) \ + : \ + ((((__CHANNEL__) & ADC_CHANNEL_0_BITFIELD) == ADC_CHANNEL_0_BITFIELD) ? (0UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_1_BITFIELD) == ADC_CHANNEL_1_BITFIELD) ? (1UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_2_BITFIELD) == ADC_CHANNEL_2_BITFIELD) ? (2UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_3_BITFIELD) == ADC_CHANNEL_3_BITFIELD) ? (3UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_4_BITFIELD) == ADC_CHANNEL_4_BITFIELD) ? (4UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_5_BITFIELD) == ADC_CHANNEL_5_BITFIELD) ? (5UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_6_BITFIELD) == ADC_CHANNEL_6_BITFIELD) ? (6UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_7_BITFIELD) == ADC_CHANNEL_7_BITFIELD) ? (7UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_8_BITFIELD) == ADC_CHANNEL_8_BITFIELD) ? (8UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_9_BITFIELD) == ADC_CHANNEL_9_BITFIELD) ? (9UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_10_BITFIELD) == ADC_CHANNEL_10_BITFIELD) ? (10UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_11_BITFIELD) == ADC_CHANNEL_11_BITFIELD) ? (11UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_12_BITFIELD) == ADC_CHANNEL_12_BITFIELD) ? (12UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_13_BITFIELD) == ADC_CHANNEL_13_BITFIELD) ? (13UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_14_BITFIELD) == ADC_CHANNEL_14_BITFIELD) ? (14UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_15_BITFIELD) == ADC_CHANNEL_15_BITFIELD) ? (15UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_16_BITFIELD) == ADC_CHANNEL_16_BITFIELD) ? (16UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_17_BITFIELD) == ADC_CHANNEL_17_BITFIELD) ? (17UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_18_BITFIELD) == ADC_CHANNEL_18_BITFIELD) ? (18UL) : \ + (0UL))))))))))))))))))))) + +/** + * @brief Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "LL_ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_CHSELR_CHSEL0 << (__DECIMAL_NB__))) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0UL) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + */ +#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + (((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT)) + +/** + * @brief Helper macro to define ADC analog watchdog parameter: + * define a single channel to monitor with analog watchdog + * from sequencer channel and groups definition. + * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels(). + * Example: + * LL_ADC_SetAnalogWDMonitChannels( + * ADC1, LL_ADC_AWD1, + * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR)) + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * @param __GROUP__ This parameter can be one of the following values: + * @arg @ref LL_ADC_GROUP_REGULAR + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VBAT_REG + */ +#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + +/** + * @brief Helper macro to set the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_ConfigAnalogWDThresholds() + * or @ref LL_ADC_SetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to set the value of + * analog watchdog threshold high (on 8 bits): + * LL_ADC_SetAnalogWDThresholds + * (< ADCx param >, + * __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, ) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \ + ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to get the value of + * analog watchdog threshold high (on 8 bits): + * < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION + * (LL_ADC_RESOLUTION_8B, + * LL_ADC_GetAnalogWDThresholds(, LL_ADC_AWD_THRESHOLD_HIGH) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \ + ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the ADC analog watchdog threshold high + * or low from raw value containing both thresholds concatenated. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, to get analog watchdog threshold high from the register raw value: + * __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(LL_ADC_AWD_THRESHOLD_HIGH, ); + * @param __AWD_THRESHOLD_TYPE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param __AWD_THRESHOLDS__ Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__) \ + (((__AWD_THRESHOLDS__) >> (((__AWD_THRESHOLD_TYPE__) & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)) & LL_ADC_AWD_THRESHOLD_LOW) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __LL_ADC_COMMON_INSTANCE(__ADCx__) \ + (ADC1_COMMON) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + LL_ADC_IsEnabled(ADC1) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value (unit: digital value of ADC conversion data) + */ +#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + (0xFFFUL >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of the data to be converted + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +(((__DATA__) \ + << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) \ + >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL)) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ +) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ + / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + * In case or error, value LL_ADC_TEMPERATURE_CALC_ERROR is returned (inconsistent temperature value) + */ +#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__)\ +((((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) != 0) ? \ + (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ + * (__VREFANALOG_VOLTAGE__)) \ + / TEMPSENSOR_CAL_VREFANALOG) \ + - (int32_t) *TEMPSENSOR_CAL1_ADDR) \ + ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP) \ + ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \ + ) + TEMPSENSOR_CAL1_TEMP \ + ) \ + : \ + ((int32_t)LL_ADC_TEMPERATURE_CALC_ERROR) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12 bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32G0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32G0, refer to device datasheet parameter "V30" (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((((int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__)) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)) \ + * 1000UL) \ + - \ + (int32_t)(((__TEMPSENSOR_TYP_CALX_V__)) \ + * 1000UL) \ + ) \ + ) / (int32_t)(__TEMPSENSOR_TYP_AVGSLOPE__) \ + ) + (int32_t)(__TEMPSENSOR_CALX_TEMP__) \ +) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management + * @{ + */ +/* Note: LL ADC functions to set DMA transfer are located into sections of */ +/* configuration of ADC instance, groups and multimode (if available): */ +/* @ref LL_ADC_REG_SetDMATransfer(), ... */ + +/** + * @brief Function to help to configure DMA transfer from ADC: retrieve the + * ADC register address from ADC instance and a list of ADC registers + * intended to be used (most commonly) with DMA transfer. + * @note These ADC registers are data registers: + * when ADC conversion data is available in ADC data registers, + * ADC generates a DMA transfer request. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA), + * (uint32_t)&< array or variable >, + * LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + * @note For devices with several ADC: in multimode, some devices + * use a different data register outside of ADC instance scope + * (common data register). This macro manages this register difference, + * only ADC instance has to be set as parameter. + * @rmtoll DR DATA LL_ADC_DMA_GetRegAddr + * @param ADCx ADC instance + * @param Register This parameter can be one of the following values: + * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA + * @retval ADC register address + */ +__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register) +{ + /* Prevent unused argument(s) compilation warning */ + (void)(Register); + + /* Retrieve address of register DR */ + return (uint32_t) &(ADCx->DR); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several ADC instances + * @{ + */ + +/** + * @brief Set parameter common to several ADC: Clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR PRESC LL_ADC_SetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonClock This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_PRESC, CommonClock); +} + +/** + * @brief Get parameter common to several ADC: Clock source and prescaler. + * @rmtoll CCR PRESC LL_ADC_GetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_PRESC)); +} + +/** + * @brief Legacy feature, useless on STM32G0 (ADC common clock low frequency + mode is automatically managed by ADC peripheral on STM32G0). + Function kept for legacy purpose. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CCR LFMEN LL_ADC_SetCommonFrequencyMode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_HIGH + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonFrequencyMode(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonFrequencyMode) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_LFMEN, CommonFrequencyMode); +} + +/** + * @brief Legacy feature, useless on STM32G0 (ADC common clock low frequency + mode is automatically managed by ADC peripheral on STM32G0). + Function kept for legacy purpose. + * @rmtoll CCR LFMEN LL_ADC_GetCommonFrequencyMode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_HIGH + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonFrequencyMode(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_LFMEN)); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Configure all paths (overwrite current configuration). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalCh\n + * CCR TSEN LL_ADC_SetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_SetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Add paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR TSEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChAdd + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChAdd(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + SET_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Remove paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChRem\n + * CCR TSEN LL_ADC_SetCommonPathInternalChRem\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChRem + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChRem(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + CLEAR_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Get parameter common to several ADC: measurement path to internal + * channels (VrefInt, temperature sensor, ...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @rmtoll CCR VREFEN LL_ADC_GetCommonPathInternalCh\n + * CCR TSEN LL_ADC_GetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_GetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Set ADC instance clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 CKMODE LL_ADC_SetClock + * @param ADCx ADC instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be configured using + * function @ref LL_ADC_SetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetClock(ADC_TypeDef *ADCx, uint32_t ClockSource) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_CKMODE, ClockSource); +} + +/** + * @brief Get ADC instance clock source and prescaler. + * @rmtoll CFGR2 CKMODE LL_ADC_GetClock + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be retrieved using + * function @ref LL_ADC_GetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + */ +__STATIC_INLINE uint32_t LL_ADC_GetClock(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_CKMODE)); +} + +/** + * @brief Set ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note This function is intended to set calibration parameters + * without having to perform a new calibration using + * @ref LL_ADC_StartCalibration(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled, without calibration on going, without conversion + * on going on group regular. + * @rmtoll CALFACT CALFACT LL_ADC_SetCalibrationFactor + * @param ADCx ADC instance + * @param CalibrationFactor Value between Min_Data=0x00 and Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t CalibrationFactor) +{ + MODIFY_REG(ADCx->CALFACT, + ADC_CALFACT_CALFACT, + CalibrationFactor); +} + +/** + * @brief Get ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note Calibration factors are set by hardware after performing + * a calibration run using function @ref LL_ADC_StartCalibration(). + * @rmtoll CALFACT CALFACT LL_ADC_GetCalibrationFactor + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7F + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT)); +} + +/** + * @brief Set ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 RES LL_ADC_SetResolution + * @param ADCx ADC instance + * @param Resolution This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_RES, Resolution); +} + +/** + * @brief Get ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 RES LL_ADC_GetResolution + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + */ +__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_RES)); +} + +/** + * @brief Set ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 ALIGN LL_ADC_SetDataAlignment + * @param ADCx ADC instance + * @param DataAlignment This parameter can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_ALIGN, DataAlignment); +} + +/** + * @brief Get ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 ALIGN LL_ADC_GetDataAlignment + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + */ +__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_ALIGN)); +} + +/** + * @brief Set ADC low power mode. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 WAIT LL_ADC_SetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_SetLowPowerMode + * @param ADCx ADC instance + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPowerMode) +{ + MODIFY_REG(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF), LowPowerMode); +} + +/** + * @brief Get ADC low power mode: + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @rmtoll CFGR1 WAIT LL_ADC_GetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_GetLowPowerMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF))); +} + +/** + * @brief Set ADC trigger frequency mode. + * @note ADC trigger frequency mode must be set to low frequency when + * a duration is exceeded before ADC conversion start trigger event + * (between ADC enable and ADC conversion start trigger event + * or between two ADC conversion start trigger event). + * Duration value: Refer to device datasheet, parameter "tIdle". + * @note When ADC trigger frequency mode is set to low frequency, + * some rearm cycles are inserted before performing ADC conversion + * start, inducing a delay of 2 ADC clock cycles. + * @note Usage of ADC trigger frequency mode with ADC low power mode: + * - Low power mode auto wait: Only the first ADC conversion + * start trigger inserts the rearm delay. + * - Low power mode auto power-off: ADC trigger frequency mode + * is discarded. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 LFTRIG LL_ADC_SetTriggerFrequencyMode + * @param ADCx ADC instance + * @param TriggerFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetTriggerFrequencyMode(ADC_TypeDef *ADCx, uint32_t TriggerFrequencyMode) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_LFTRIG, TriggerFrequencyMode); +} + +/** + * @brief Get ADC trigger frequency mode. + * @rmtoll CFGR2 LFTRIG LL_ADC_GetTriggerFrequencyMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetTriggerFrequencyMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_LFTRIG)); +} + +/** + * @brief Set sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 families, sampling time is channel wise) + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 series, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMP1 LL_ADC_SetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_SetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @param SamplingTime This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY, + uint32_t SamplingTime) +{ + MODIFY_REG(ADCx->SMPR, + ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK), + SamplingTime << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @brief Get sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 families, sampling time is channel wise) + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMP1 LL_ADC_GetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_GetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + */ +__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY) +{ + return (uint32_t)((READ_BIT(ADCx->SMPR, ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK))) + >> (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Set ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note On this STM32 series, setting trigger source to external trigger + * also set trigger polarity to rising edge + * (default setting for compatibility with some ADC on other + * STM32 families having this setting set by HW default value). + * In case of need to modify trigger edge, use + * function @ref LL_ADC_REG_SetTriggerEdge(). + * @note On this STM32 series, ADC trigger frequency mode must be set + * in function of frequency of ADC group regular conversion trigger. + * Refer to description of function + * @ref LL_ADC_SetTriggerFrequencyMode(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_SetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32G0, parameter not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL, TriggerSource); +} + +/** + * @brief Get ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note To determine whether group regular trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)") + * use function @ref LL_ADC_REG_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_GetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32G0, parameter not available on all devices + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) +{ + __IO uint32_t TriggerSource = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CFGR1_EXTEN {0; 1; 2; 3}. */ + uint32_t ShiftExten = ((TriggerSource & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL)); + + /* Set bitfield corresponding to ADC_CFGR1_EXTEN and ADC_CFGR1_EXTSEL */ + /* to match with triggers literals definition. */ + return ((TriggerSource + & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR1_EXTSEL) + | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR1_EXTEN) + ); +} + +/** + * @brief Get ADC group regular conversion trigger source internal (SW start) + * or external. + * @note In case of group regular trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_REG_GetTriggerSource(). + * @rmtoll CFGR1 EXTEN LL_ADC_REG_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN)) ? 1UL : 0UL); +} + +/** + * @brief Set ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_SetTriggerEdge + * @param ADCx ADC instance + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN, ExternalTriggerEdge); +} + +/** + * @brief Get ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN)); +} + +/** + * @brief Set ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @param Configurability This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerConfigurable(ADC_TypeDef *ADCx, uint32_t Configurability) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD, Configurability); +} + +/** + * @brief Get ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerConfigurable(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD)); +} + +/** + * @brief Set ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + SET_BIT(ADCx->CHSELR, SequencerNbRanks); +} + +/** + * @brief Get ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx) +{ + __IO uint32_t ChannelsRanks = READ_BIT(ADCx->CHSELR, ADC_CHSELR_SQ_ALL); + uint32_t SequencerLength = LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS; + uint32_t RankIndex; + + /* Parse register for end of sequence identifier */ + for (RankIndex = 0UL; RankIndex < (32U - 4U); RankIndex += 4U) + { + if ((ChannelsRanks & (ADC_CHSELR_SQ2 << RankIndex)) == (ADC_CHSELR_SQ2 << RankIndex)) + { + SequencerLength = (ADC_CHSELR_SQ2 << RankIndex); + break; + } + } + + return SequencerLength; +} + +/** + * @brief Set ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 series, this setting is not available and + * the default scan direction is forward. + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_SetSequencerScanDirection + * @param ADCx ADC instance + * @param ScanDirection This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerScanDirection(ADC_TypeDef *ADCx, uint32_t ScanDirection) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_SCANDIR, ScanDirection); +} + +/** + * @brief Get ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 families, this setting is not available and + * the default scan direction is forward. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_GetSequencerScanDirection + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerScanDirection(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_SCANDIR)); +} + +/** + * @brief Set ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_SetSequencerDiscont\n + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DISCEN, SeqDiscont); +} + +/** + * @brief Get ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_GetSequencerDiscont\n + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DISCEN)); +} + +/** + * @brief Set ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note This function performs configuration of: + * - Channels ordering into each rank of scan sequence: + * whatever channel can be placed into whatever rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK), + ((Channel & ADC_CHANNEL_ID_NUMBER_MASK_SEQ) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) +{ + return (uint32_t)((READ_BIT(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) + >> (Rank & ADC_REG_RANK_ID_SQRX_MASK) + ) << (ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ); +} + +/** + * @brief Set ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by overwriting the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChannels + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChannels(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + WRITE_REG(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Add channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by adding them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChAdd + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChAdd(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + SET_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Remove channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by removing them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChRem + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChRem(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + CLEAR_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels order reading into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be retrieved. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_GetSequencerChannels + * @param ADCx ADC instance + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerChannels(ADC_TypeDef *ADCx) +{ + uint32_t ChannelsBitfield = (uint32_t)READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL); + + return ((((ChannelsBitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17) +#if defined(ADC_CCR_VBATEN) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18) +#endif + ); +} + +/** + * @brief Set ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 CONT LL_ADC_REG_SetContinuousMode + * @param ADCx ADC instance + * @param Continuous This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CONT, Continuous); +} + +/** + * @brief Get ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @rmtoll CFGR1 CONT LL_ADC_REG_GetContinuousMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CONT)); +} + +/** + * @brief Set ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 DMAEN LL_ADC_REG_SetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_SetDMATransfer + * @param ADCx ADC instance + * @param DMATransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG, DMATransfer); +} + +/** + * @brief Get ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @rmtoll CFGR1 DMAEN LL_ADC_REG_GetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_GetDMATransfer + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG)); +} + +/** + * @brief Set ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @note Compatibility with devices without feature overrun: + * other devices without this feature have a behavior + * equivalent to data overwritten. + * The default setting of overrun is data preserved. + * Therefore, for compatibility with all devices, parameter + * overrun should be set to data overwritten. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_SetOverrun + * @param ADCx ADC instance + * @param Overrun This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_OVRMOD, Overrun); +} + +/** + * @brief Get ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_GetOverrun + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_OVRMOD)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels + * @{ + */ + +/** + * @brief Set sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMPSEL0 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_SetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTimeY) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->SMPR, + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS), + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS) & (SamplingTimeY & ADC_SAMPLING_TIME_CH_MASK) + ); +} + +/** + * @brief Get sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMPSEL0 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_GetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel) +{ + __IO uint32_t smpr = READ_REG(ADCx->SMPR); + + /* Retrieve sampling time bit corresponding to the selected channel */ + /* and shift it to position 0. */ + uint32_t smp_channel_posbit0 = ((smpr & ADC_SAMPLING_TIME_CH_MASK) + >> ((((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ADC_SMPR_SMPSEL0_BITOFFSET_POS) & + 0x1FUL)); + + /* Select sampling time bitfield depending on sampling time bit value 0 or 1. */ + return ((~(smp_channel_posbit0) * LL_ADC_SAMPLINGTIME_COMMON_1) + | (smp_channel_posbit0 * LL_ADC_SAMPLINGTIME_COMMON_2)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog + * @{ + */ + +/** + * @brief Set ADC analog watchdog monitored channels: + * a single channel, multiple channels or all channels, + * on ADC group regular. + * @note Once monitored channels are selected, analog watchdog + * is enabled. + * @note In case of need to define a single channel to monitor + * with analog watchdog from sequencer channel definition, + * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 AWD1CH LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_SetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_SetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_SetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDChannelGroup This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VBAT_REG + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDChannelGroup) +{ + /* Set bits with content of parameter "AWDChannelGroup" with bits position */ + /* in register and register position depending on parameter "AWDy". */ + /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg; + + if (AWDy == LL_ADC_AWD1) + { + preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, 0UL); + } + else + { + preg = __ADC_PTR_REG_OFFSET(ADCx->AWD2CR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK)) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL)); + } + + MODIFY_REG(*preg, + (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK), + AWDChannelGroup & AWDy); +} + +/** + * @brief Get ADC analog watchdog monitored channel. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Applicable only when the analog watchdog is set to monitor + * one channel. + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 AWD1CH LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_GetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_GetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_GetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On this AWD number, monitored channel can be retrieved + * if only 1 channel is programmed (or none or all channels). + * This function cannot retrieve monitored channel if + * multiple channels are programmed simultaneously + * by bitfield. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK); + + /* If "AnalogWDMonitChannels" == 0, then the selected AWD is disabled */ + /* (parameter value LL_ADC_AWD_DISABLE). */ + /* Else, the selected AWD is enabled and is monitoring a group of channels */ + /* or a single channel. */ + if (AnalogWDMonitChannels != 0UL) + { + if (AWDy == LL_ADC_AWD1) + { + if ((AnalogWDMonitChannels & ADC_CFGR1_AWD1SGL) == 0UL) + { + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = ((AnalogWDMonitChannels + | (ADC_AWD_CR23_CHANNEL_MASK) + ) + & (~(ADC_CFGR1_AWD1CH)) + ); + } + else + { + /* AWD monitoring a single channel */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + | (ADC_AWD2CR_AWD2CH_0 << (AnalogWDMonitChannels >> ADC_CFGR1_AWD1CH_Pos)) + ); + } + } + else + { + if ((AnalogWDMonitChannels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK) + { + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = (ADC_AWD_CR23_CHANNEL_MASK + | (ADC_CFGR1_AWD1EN) + ); + } + else + { + /* AWD monitoring a single channel */ + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + | (ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDMonitChannels) << ADC_CFGR1_AWD1CH_Pos) + ); + } + } + } + + return AnalogWDMonitChannels; +} + +/** + * @brief Set ADC analog watchdog thresholds value of both thresholds + * high and low. + * @note If value of only one threshold high or low must be set, + * use function @ref LL_ADC_SetAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll TR1 HT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 HT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 HT3 LL_ADC_ConfigAnalogWDThresholds\n + * TR1 LT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 LT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 LT3 LL_ADC_ConfigAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdHighValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdHighValue, + uint32_t AWDThresholdLowValue) +{ + /* Set bits with content of parameter "AWDThresholdxxxValue" with bits */ + /* position in register and register position depending on parameter */ + /* "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + MODIFY_REG(*preg, + ADC_TR1_HT1 | ADC_TR1_LT1, + (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); +} + +/** + * @brief Set ADC analog watchdog threshold value of threshold + * high or low. + * @note If values of both thresholds high or low must be set, + * use function @ref LL_ADC_ConfigAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is not conditioned to + * ADC state: + * ADC can be disabled, enabled with or without conversion on going + * on ADC group regular. + * @rmtoll TR1 HT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_SetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_SetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow, + uint32_t AWDThresholdValue) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + MODIFY_REG(*preg, + AWDThresholdsHighLow, + AWDThresholdValue << ((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)); +} + +/** + * @brief Get ADC analog watchdog threshold value of threshold high, + * threshold low or raw data with ADC thresholds high and low + * concatenated. + * @note If raw data with ADC thresholds high and low is retrieved, + * the data of each threshold high or low can be isolated + * using helper macro: + * @ref __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(). + * @rmtoll TR1 HT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_GetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_GetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + return (uint32_t)(READ_BIT(*preg, + (AWDThresholdsHighLow | ADC_TR1_LT1)) + >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) + & ~(AWDThresholdsHighLow & ADC_TR1_LT1))); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_oversampling Configuration of ADC transversal scope: oversampling + * @{ + */ + +/** + * @brief Set ADC oversampling scope. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSE LL_ADC_SetOverSamplingScope + * @param ADCx ADC instance + * @param OvsScope This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingScope(ADC_TypeDef *ADCx, uint32_t OvsScope) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_OVSE, OvsScope); +} + +/** + * @brief Get ADC oversampling scope. + * @rmtoll CFGR2 OVSE LL_ADC_GetOverSamplingScope + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSE)); +} + +/** + * @brief Set ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR2 TOVS LL_ADC_SetOverSamplingDiscont + * @param ADCx ADC instance + * @param OverSamplingDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingDiscont(ADC_TypeDef *ADCx, uint32_t OverSamplingDiscont) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_TOVS, OverSamplingDiscont); +} + +/** + * @brief Get ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @rmtoll CFGR2 TOVS LL_ADC_GetOverSamplingDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TOVS)); +} + +/** + * @brief Set ADC oversampling + * @note This function set the 2 items of oversampling configuration: + * - ratio + * - shift + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSS LL_ADC_ConfigOverSamplingRatioShift\n + * CFGR2 OVSR LL_ADC_ConfigOverSamplingRatioShift + * @param ADCx ADC instance + * @param Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + * @param Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigOverSamplingRatioShift(ADC_TypeDef *ADCx, uint32_t Ratio, uint32_t Shift) +{ + MODIFY_REG(ADCx->CFGR2, (ADC_CFGR2_OVSS | ADC_CFGR2_OVSR), (Shift | Ratio)); +} + +/** + * @brief Get ADC oversampling ratio + * @rmtoll CFGR2 OVSR LL_ADC_GetOverSamplingRatio + * @param ADCx ADC instance + * @retval Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSR)); +} + +/** + * @brief Get ADC oversampling shift + * @rmtoll CFGR2 OVSS LL_ADC_GetOverSamplingShift + * @param ADCx ADC instance + * @retval Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSS)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Enable ADC instance internal voltage regulator. + * @note On this STM32 series, there are three possibilities to enable + * the voltage regulator: + * - by enabling it manually + * using function @ref LL_ADC_EnableInternalRegulator(). + * - by launching a calibration + * using function @ref LL_ADC_StartCalibration(). + * - by enabling the ADC + * using function @ref LL_ADC_Enable(). + * @note On this STM32 series, after ADC internal voltage regulator enable, + * a delay for ADC internal voltage regulator stabilization + * is required before performing a ADC calibration or ADC enable. + * Refer to device datasheet, parameter "tADCVREG_STUP". + * Refer to literal @ref LL_ADC_DELAY_INTERNAL_REGUL_STAB_US. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_EnableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableInternalRegulator(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADVREGEN); +} + +/** + * @brief Disable ADC internal voltage regulator. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_DisableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableInternalRegulator(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR, (ADC_CR_ADVREGEN | ADC_CR_BITS_PROPERTY_RS)); +} + +/** + * @brief Get the selected ADC instance internal voltage regulator state. + * @rmtoll CR ADVREGEN LL_ADC_IsInternalRegulatorEnabled + * @param ADCx ADC instance + * @retval 0: internal regulator is disabled, 1: internal regulator is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsInternalRegulatorEnabled(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADVREGEN) == (ADC_CR_ADVREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the selected ADC instance. + * @note On this STM32 series, after ADC enable, a delay for + * ADC internal analog stabilization is required before performing a + * ADC conversion start. + * Refer to device datasheet, parameter tSTAB. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled and ADC internal voltage regulator enabled. + * @rmtoll CR ADEN LL_ADC_Enable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADEN); +} + +/** + * @brief Disable the selected ADC instance. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be not disabled. Must be enabled without conversion on going + * on group regular. + * @rmtoll CR ADDIS LL_ADC_Disable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADDIS); +} + +/** + * @brief Get the selected ADC instance enable state. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll CR ADEN LL_ADC_IsEnabled + * @param ADCx ADC instance + * @retval 0: ADC is disabled, 1: ADC is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADEN) == (ADC_CR_ADEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the selected ADC instance disable state. + * @rmtoll CR ADDIS LL_ADC_IsDisableOngoing + * @param ADCx ADC instance + * @retval 0: no ADC disable command on going. + */ +__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS)) ? 1UL : 0UL); +} + +/** + * @brief Start ADC calibration in the mode single-ended + * or differential (for devices with differential mode available). + * @note On this STM32 series, a minimum number of ADC clock cycles + * are required between ADC end of calibration and ADC enable. + * Refer to literal @ref LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES. + * @note In case of usage of ADC with DMA transfer: + * On this STM32 series, ADC DMA transfer request should be disabled + * during calibration: + * Calibration factor is available in data register + * and also transferred by DMA. + * To not insert ADC calibration factor among ADC conversion data + * in array variable, DMA transfer must be disabled during + * calibration. + * (DMA transfer setting backup and disable before calibration, + * DMA transfer setting restore after calibration. + * Refer to functions @ref LL_ADC_REG_GetDMATransfer(), + * @ref LL_ADC_REG_SetDMATransfer() ). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADCAL LL_ADC_StartCalibration + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADCAL); +} + +/** + * @brief Get ADC calibration state. + * @rmtoll CR ADCAL LL_ADC_IsCalibrationOnGoing + * @param ADCx ADC instance + * @retval 0: calibration complete, 1: calibration in progress. + */ +__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADCAL) == (ADC_CR_ADCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Start ADC group regular conversion. + * @note On this STM32 series, this function is relevant for both + * internal trigger (SW start) and external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * will start at next trigger event (on the selected trigger edge) + * following the ADC start conversion command. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group regular, + * without conversion stop command on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTART LL_ADC_REG_StartConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTART); +} + +/** + * @brief Stop ADC group regular conversion. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled with conversion on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTP LL_ADC_REG_StopConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StopConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTP); +} + +/** + * @brief Get ADC group regular conversion state. + * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing + * @param ADCx ADC instance + * @retval 0: no conversion is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTART) == (ADC_CR_ADSTART)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular command of conversion stop state + * @rmtoll CR ADSTP LL_ADC_REG_IsStopConversionOngoing + * @param ADCx ADC instance + * @retval 0: no command of conversion stop is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTP) == (ADC_CR_ADSTP)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData32 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData12 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData10 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData8 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData6 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management + * @{ + */ + +/** + * @brief Get flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_IsActiveFlag_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC channel configuration ready. + * @note On this STM32 series, after modifying sequencer + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, performing some actions (configuration update, + * ADC conversion start, ... ) will be ignored. + * Functions requiring wait for CCRDY flag are: + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks() + * @ref LL_ADC_REG_SetSequencerChannels() + * @ref LL_ADC_REG_SetSequencerChAdd() + * @ref LL_ADC_REG_SetSequencerChRem() + * @ref LL_ADC_REG_SetSequencerScanDirection() + * @ref LL_ADC_REG_SetSequencerConfigurable() + * @note Duration of ADC channel configuration ready: CCRDY handshake + * requires 1APB + 2 ADC + 3 APB cycles after the channel configuration + * has been changed. + * @rmtoll ISR CCRDY LL_ADC_IsActiveFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_IsActiveFlag_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, ADC_ISR_EOC) == (ADC_ISR_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_IsActiveFlag_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_IsActiveFlag_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_IsActiveFlag_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 1 flag + * @rmtoll ISR AWD1 LL_ADC_IsActiveFlag_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_IsActiveFlag_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD2(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD2) == (LL_ADC_FLAG_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_IsActiveFlag_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD3) == (LL_ADC_FLAG_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_IsActiveFlag_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOCAL) == (LL_ADC_FLAG_EOCAL)) ? 1UL : 0UL); +} + +/** + * @brief Clear flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_ClearFlag_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_ADRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_ADRDY); +} + +/** + * @brief Clear flag ADC channel configuration ready. + * @rmtoll ISR CCRDY LL_ADC_ClearFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_ClearFlag_CCRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Clear flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_ClearFlag_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOC(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOC); +} + +/** + * @brief Clear flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_ClearFlag_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOS); +} + +/** + * @brief Clear flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_ClearFlag_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_OVR); +} + +/** + * @brief Clear flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_ClearFlag_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOSMP(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOSMP); +} + +/** + * @brief Clear flag ADC analog watchdog 1. + * @rmtoll ISR AWD1 LL_ADC_ClearFlag_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD1); +} + +/** + * @brief Clear flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_ClearFlag_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD2(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD2); +} + +/** + * @brief Clear flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_ClearFlag_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD3(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD3); +} + +/** + * @brief Clear flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_ClearFlag_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOCAL(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOCAL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_IT_Management ADC IT management + * @{ + */ + +/** + * @brief Enable ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_ADRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Enable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_EnableIT_CCRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Enable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_EnableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOC(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Enable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_EnableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Enable ADC group regular interruption overrun. + * @rmtoll IER OVRIE LL_ADC_EnableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Enable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_EnableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOSMP(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Enable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Enable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_EnableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD2(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Enable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_EnableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD3(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Enable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_EnableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOCAL(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Disable interruption ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_ADRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Disable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_DisableIT_CCRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Disable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_DisableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOC(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Disable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_DisableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Disable interruption ADC group regular overrun. + * @rmtoll IER OVRIE LL_ADC_DisableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Disable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_DisableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOSMP(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Disable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_DisableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Disable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_DisableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD2(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Disable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_DisableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD3(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Disable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_DisableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOCAL(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Get state of interruption ADC ready + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of unitary conversion + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCIE LL_ADC_IsEnabledIT_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOC) == (LL_ADC_IT_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sequence conversions + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSIE LL_ADC_IsEnabledIT_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular overrun + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER OVRIE LL_ADC_IsEnabledIT_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sampling + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSMPIE LL_ADC_IsEnabledIT_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC analog watchdog 1 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD1IE LL_ADC_IsEnabledIT_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 2 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD2IE LL_ADC_IsEnabledIT_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD2(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD2) == (LL_ADC_IT_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 3 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD3IE LL_ADC_IsEnabledIT_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD3) == (LL_ADC_IT_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC end of calibration + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCALIE LL_ADC_IsEnabledIT_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOCAL) == (LL_ADC_IT_EOCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +/* Initialization of some features of ADC common parameters and multimode */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON); +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); + +/* De-initialization of ADC instance */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx); + +/* Initialization of some features of ADC instance */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct); +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct); + +/* Initialization of some features of ADC instance and ADC group regular */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h new file mode 100644 index 0000000..14727c2 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h @@ -0,0 +1,2272 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_DMA_H +#define STM32G0xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "stm32g0xx_ll_dmamux.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), +#if defined(DMA1_Channel6_BASE) + (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE), +#endif +#if defined(DMA1_Channel7_BASE) + (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE), +#endif +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @brief Helper macro to convert DMA Instance DMAx into DMAMUX channel + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @param __DMA_INSTANCE__ DMAx + * @retval Channel_Offset (LL_DMA_CHANNEL_7 or 0). + */ +#define __LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(__DMA_INSTANCE__) \ +(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) ? 0 : LL_DMA_CHANNEL_7) +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000000U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000001U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000002U /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 0x00000003U /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 0x00000004U /*!< DMA Channel 5 */ +#if defined(DMA1_Channel6) +#define LL_DMA_CHANNEL_6 0x00000005U /*!< DMA Channel 6 */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_CHANNEL_7 0x00000006U /*!< DMA Channel 7 */ +#endif +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#if defined(DMA2) +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1) +#else /* DMA1 */ +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) +#endif + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#if defined(DMA2) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + LL_DMA_CHANNEL_5) +#endif +#endif /* DMA2 */ + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#if defined(DMA2) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + DMA1_Channel5) +#endif +#endif /* DMA2 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each peripheral using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +/** + * @brief Set DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + MODIFY_REG((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + return (READ_BIT((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Clear Channel 1 global interrupt flag. + * @note Do not Clear Channel 1 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC1, LL_DMA_ClearFlag_HT1, + LL_DMA_ClearFlag_TE1. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @note Do not Clear Channel 2 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC2, LL_DMA_ClearFlag_HT2, + LL_DMA_ClearFlag_TE2. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @note Do not Clear Channel 3 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC3, LL_DMA_ClearFlag_HT3, + LL_DMA_ClearFlag_TE3. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @note Do not Clear Channel 4 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC4, LL_DMA_ClearFlag_HT4, + LL_DMA_ClearFlag_TE4. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @note Do not Clear Channel 5 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC5, LL_DMA_ClearFlag_HT5, + LL_DMA_ClearFlag_TE5. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 global interrupt flag. + * @note Do not Clear Channel 6 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC6, LL_DMA_ClearFlag_HT6, + LL_DMA_ClearFlag_TE6. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 global interrupt flag. + * @note Do not Clear Channel 7 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC7, LL_DMA_ClearFlag_HT7, + LL_DMA_ClearFlag_TE7. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); +} + +#endif +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); +} + +#endif +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); +} + +#endif +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); +} + +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h new file mode 100644 index 0000000..9b7a71a --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h @@ -0,0 +1,1828 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_DMAMUX_H +#define STM32G0xx_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004UL + +/* Define used to get DMAMUX RGCR register size */ +#define DMAMUX_RGCR_SIZE 0x00000004UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ +/** @defgroup DMAMUX_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_WriteReg function + * @{ + */ +#define LL_DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#endif +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#endif +#if defined(DMA2) +#define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#endif /* DMA2 */ +#define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF3 DMAMUX_RGCFR_COF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_ReadReg function + * @{ + */ +#define LL_DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#endif +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#endif +#if defined(DMA2) +#define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#endif /* DMA2 */ +#define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF3 DMAMUX_RGSR_OF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMAMUX_WriteReg functions + * @{ + */ +#define LL_DMAMUX_CCR_SOIE DMAMUX_CxCR_SOIE /*!< Synchronization Event Overrun Interrupt */ +#define LL_DMAMUX_RGCR_RGOIE DMAMUX_RGxCR_OIE /*!< Request Generation Trigger Event Overrun Interrupt */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST Transfer request + * @{ + */ +#define LL_DMAMUX_REQ_MEM2MEM 0x00000000U /*!< memory to memory transfer */ +#define LL_DMAMUX_REQ_GENERATOR0 0x00000001U /*!< DMAMUX request generator 0 */ +#define LL_DMAMUX_REQ_GENERATOR1 0x00000002U /*!< DMAMUX request generator 1 */ +#define LL_DMAMUX_REQ_GENERATOR2 0x00000003U /*!< DMAMUX request generator 2 */ +#define LL_DMAMUX_REQ_GENERATOR3 0x00000004U /*!< DMAMUX request generator 3 */ +#define LL_DMAMUX_REQ_ADC1 0x00000005U /*!< DMAMUX ADC1 request */ +#if defined(AES) +#define LL_DMAMUX_REQ_AES_IN 0x00000006U /*!< DMAMUX AES_IN request */ +#define LL_DMAMUX_REQ_AES_OUT 0x00000007U /*!< DMAMUX AES_OUT request */ +#endif +#if defined(DAC1) +#define LL_DMAMUX_REQ_DAC1_CH1 0x00000008U /*!< DMAMUX DAC_CH1 request */ +#define LL_DMAMUX_REQ_DAC1_CH2 0x00000009U /*!< DMAMUX DAC_CH2 request */ +#endif +#define LL_DMAMUX_REQ_I2C1_RX 0x0000000AU /*!< DMAMUX I2C1 RX request */ +#define LL_DMAMUX_REQ_I2C1_TX 0x0000000BU /*!< DMAMUX I2C1 TX request */ +#define LL_DMAMUX_REQ_I2C2_RX 0x0000000CU /*!< DMAMUX I2C2 RX request */ +#define LL_DMAMUX_REQ_I2C2_TX 0x0000000DU /*!< DMAMUX I2C2 TX request */ +#if defined(LPUART1) +#define LL_DMAMUX_REQ_LPUART1_RX 0x0000000EU /*!< DMAMUX LPUART1 RX request */ +#define LL_DMAMUX_REQ_LPUART1_TX 0x0000000FU /*!< DMAMUX LPUART1 TX request */ +#endif +#define LL_DMAMUX_REQ_SPI1_RX 0x00000010U /*!< DMAMUX SPI1 RX request */ +#define LL_DMAMUX_REQ_SPI1_TX 0x00000011U /*!< DMAMUX SPI1 TX request */ +#define LL_DMAMUX_REQ_SPI2_RX 0x00000012U /*!< DMAMUX SPI2 RX request */ +#define LL_DMAMUX_REQ_SPI2_TX 0x00000013U /*!< DMAMUX SPI2 TX request */ +#define LL_DMAMUX_REQ_TIM1_CH1 0x00000014U /*!< DMAMUX TIM1 CH1 request */ +#define LL_DMAMUX_REQ_TIM1_CH2 0x00000015U /*!< DMAMUX TIM1 CH2 request */ +#define LL_DMAMUX_REQ_TIM1_CH3 0x00000016U /*!< DMAMUX TIM1 CH3 request */ +#define LL_DMAMUX_REQ_TIM1_CH4 0x00000017U /*!< DMAMUX TIM1 CH4 request */ +#define LL_DMAMUX_REQ_TIM1_TRIG_COM 0x00000018U /*!< DMAMUX TIM1 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM1_UP 0x00000019U /*!< DMAMUX TIM1 UP request */ +#if defined(TIM2) +#define LL_DMAMUX_REQ_TIM2_CH1 0x0000001AU /*!< DMAMUX TIM2 CH1 request */ +#define LL_DMAMUX_REQ_TIM2_CH2 0x0000001BU /*!< DMAMUX TIM2 CH2 request */ +#define LL_DMAMUX_REQ_TIM2_CH3 0x0000001CU /*!< DMAMUX TIM2 CH3 request */ +#define LL_DMAMUX_REQ_TIM2_CH4 0x0000001DU /*!< DMAMUX TIM2 CH4 request */ +#define LL_DMAMUX_REQ_TIM2_TRIG 0x0000001EU /*!< DMAMUX TIM2 TRIG request */ +#define LL_DMAMUX_REQ_TIM2_UP 0x0000001FU /*!< DMAMUX TIM2 UP request */ +#endif +#define LL_DMAMUX_REQ_TIM3_CH1 0x00000020U /*!< DMAMUX TIM3 CH1 request */ +#define LL_DMAMUX_REQ_TIM3_CH2 0x00000021U /*!< DMAMUX TIM3 CH2 request */ +#define LL_DMAMUX_REQ_TIM3_CH3 0x00000022U /*!< DMAMUX TIM3 CH3 request */ +#define LL_DMAMUX_REQ_TIM3_CH4 0x00000023U /*!< DMAMUX TIM3 CH4 request */ +#define LL_DMAMUX_REQ_TIM3_TRIG 0x00000024U /*!< DMAMUX TIM3 TRIG request */ +#define LL_DMAMUX_REQ_TIM3_UP 0x00000025U /*!< DMAMUX TIM3 UP request */ +#if defined(TIM6) +#define LL_DMAMUX_REQ_TIM6_UP 0x00000026U /*!< DMAMUX TIM6 UP request */ +#endif +#if defined(TIM7) +#define LL_DMAMUX_REQ_TIM7_UP 0x00000027U /*!< DMAMUX TIM7 UP request */ +#endif +#if defined(TIM15) +#define LL_DMAMUX_REQ_TIM15_CH1 0x00000028U /*!< DMAMUX TIM15 CH1 request */ +#define LL_DMAMUX_REQ_TIM15_CH2 0x00000029U /*!< DMAMUX TIM15 CH2 request */ +#define LL_DMAMUX_REQ_TIM15_TRIG_COM 0x0000002AU /*!< DMAMUX TIM15 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM15_UP 0x0000002BU /*!< DMAMUX TIM15 UP request */ +#endif +#define LL_DMAMUX_REQ_TIM16_CH1 0x0000002CU /*!< DMAMUX TIM16 CH1 request */ +#define LL_DMAMUX_REQ_TIM16_COM 0x0000002DU /*!< DMAMUX TIM16 COM request */ +#define LL_DMAMUX_REQ_TIM16_UP 0x0000002EU /*!< DMAMUX TIM16 UP request */ +#define LL_DMAMUX_REQ_TIM17_CH1 0x0000002FU /*!< DMAMUX TIM17 CH1 request */ +#define LL_DMAMUX_REQ_TIM17_COM 0x00000030U /*!< DMAMUX TIM17 COM request */ +#define LL_DMAMUX_REQ_TIM17_UP 0x00000031U /*!< DMAMUX TIM17 UP request */ +#define LL_DMAMUX_REQ_USART1_RX 0x00000032U /*!< DMAMUX USART1 RX request */ +#define LL_DMAMUX_REQ_USART1_TX 0x00000033U /*!< DMAMUX USART1 TX request */ +#define LL_DMAMUX_REQ_USART2_RX 0x00000034U /*!< DMAMUX USART2 RX request */ +#define LL_DMAMUX_REQ_USART2_TX 0x00000035U /*!< DMAMUX USART2 TX request */ +#if defined(USART3) +#define LL_DMAMUX_REQ_USART3_RX 0x00000036U /*!< DMAMUX USART3 RX request */ +#define LL_DMAMUX_REQ_USART3_TX 0x00000037U /*!< DMAMUX USART3 TX request */ +#endif +#if defined(USART4) +#define LL_DMAMUX_REQ_USART4_RX 0x00000038U /*!< DMAMUX USART4 RX request */ +#define LL_DMAMUX_REQ_USART4_TX 0x00000039U /*!< DMAMUX USART4 TX request */ +#endif +#if defined(UCPD1) +#define LL_DMAMUX_REQ_UCPD1_RX 0x0000003AU /*!< DMAMUX UCPD1 RX request */ +#define LL_DMAMUX_REQ_UCPD1_TX 0x0000003BU /*!< DMAMUX UCPD1 TX request */ +#endif +#if defined(UCPD2) +#define LL_DMAMUX_REQ_UCPD2_RX 0x0000003CU /*!< DMAMUX UCPD2 RX request */ +#define LL_DMAMUX_REQ_UCPD2_TX 0x0000003DU /*!< DMAMUX UCPD2 TX request */ +#endif + +#if defined(I2C3) +#define LL_DMAMUX_REQ_I2C3_RX 0x0000003EU /*!< DMAMUX I2C3 RX request */ +#define LL_DMAMUX_REQ_I2C3_TX 0x0000003FU /*!< DMAMUX I2C3 TX request */ +#endif + +#if defined(LPUART2) +#define LL_DMAMUX_REQ_LPUART2_RX 0x00000040U /*!< DMAMUX LPUART2 RX request */ +#define LL_DMAMUX_REQ_LPUART2_TX 0x00000041U /*!< DMAMUX LPUART2 TX request */ +#endif + +#if defined(SPI3) +#define LL_DMAMUX_REQ_SPI3_RX 0x00000042U /*!< DMAMUX SPI3 RX request */ +#define LL_DMAMUX_REQ_SPI3_TX 0x00000043U /*!< DMAMUX SPI3 TX request */ +#endif + +#if defined(TIM4) +#define LL_DMAMUX_REQ_TIM4_CH1 0x00000044U /*!< DMAMUX TIM4 CH1 request */ +#define LL_DMAMUX_REQ_TIM4_CH2 0x00000045U /*!< DMAMUX TIM4 CH2 request */ +#define LL_DMAMUX_REQ_TIM4_CH3 0x00000046U /*!< DMAMUX TIM4 CH3 request */ +#define LL_DMAMUX_REQ_TIM4_CH4 0x00000047U /*!< DMAMUX TIM4 CH4 request */ +#define LL_DMAMUX_REQ_TIM4_TRIG 0x00000048U /*!< DMAMUX TIM4 TRIG request */ +#define LL_DMAMUX_REQ_TIM4_UP 0x00000049U /*!< DMAMUX TIM4 UP request */ +#endif + +#if defined(USART5) +#define LL_DMAMUX_REQ_USART5_RX 0x0000004AU /*!< DMAMUX USART5 RX request */ +#define LL_DMAMUX_REQ_USART5_TX 0x0000004BU /*!< DMAMUX USART5 TX request */ +#endif + +#if defined(USART6) +#define LL_DMAMUX_REQ_USART6_RX 0x0000004CU /*!< DMAMUX USART6 RX request */ +#define LL_DMAMUX_REQ_USART6_TX 0x0000004DU /*!< DMAMUX USART6 TX request */ +#endif + +#if defined(STM32G0C1xx)||defined(STM32G0B1xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART6_TX +#elif defined(STM32G0B0xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART4_TX +#elif defined(STM32G081xx)||defined(STM32G071xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_UCPD2_TX +#elif defined(STM32G070xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART4_TX +#else +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART2_TX +#endif +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX Channel 0 connected to DMA1 Channel 1 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX Channel 1 connected to DMA1 Channel 2 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX Channel 2 connected to DMA1 Channel 3 */ +#define LL_DMAMUX_CHANNEL_3 0x00000003U /*!< DMAMUX Channel 3 connected to DMA1 Channel 4 */ +#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX Channel 4 connected to DMA1 Channel 5 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX Channel 5 connected to DMA1 Channel 6 */ +#endif +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX Channel 6 connected to DMA1 Channel 7 */ +#endif +#if defined(DMA2) +#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX Channel 7 connected to DMA2 Channel 1 */ +#define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX Channel 8 connected to DMA2 Channel 2 */ +#define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX Channel 9 connected to DMA2 Channel 3 */ +#define LL_DMAMUX_CHANNEL_10 0x0000000AU /*!< DMAMUX Channel 10 connected to DMA2 Channel 4 */ +#define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX Channel 11 connected to DMA2 Channel 5 */ +#endif +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_NO Synchronization Signal Polarity + * @{ + */ +#define LL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< All requests are blocked */ +#define LL_DMAMUX_SYNC_POL_RISING DMAMUX_CxCR_SPOL_0 /*!< Synchronization on event on rising edge */ +#define LL_DMAMUX_SYNC_POL_FALLING DMAMUX_CxCR_SPOL_1 /*!< Synchronization on event on falling edge */ +#define LL_DMAMUX_SYNC_POL_RISING_FALLING (DMAMUX_CxCR_SPOL_0 | DMAMUX_CxCR_SPOL_1) /*!< Synchronization on event on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_EVT Synchronization Signal Event + * @{ + */ +#define LL_DMAMUX_SYNC_EXTI_LINE0 0x00000000U /*!< Synchronization signal from EXTI Line0 */ +#define LL_DMAMUX_SYNC_EXTI_LINE1 DMAMUX_CxCR_SYNC_ID_0 /*!< Synchronization signal from EXTI Line1 */ +#define LL_DMAMUX_SYNC_EXTI_LINE2 DMAMUX_CxCR_SYNC_ID_1 /*!< Synchronization signal from EXTI Line2 */ +#define LL_DMAMUX_SYNC_EXTI_LINE3 (DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE4 DMAMUX_CxCR_SYNC_ID_2 /*!< Synchronization signal from EXTI Line4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE5 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line5 */ +#define LL_DMAMUX_SYNC_EXTI_LINE6 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line6 */ +#define LL_DMAMUX_SYNC_EXTI_LINE7 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line7 */ +#define LL_DMAMUX_SYNC_EXTI_LINE8 DMAMUX_CxCR_SYNC_ID_3 /*!< Synchronization signal from EXTI Line8 */ +#define LL_DMAMUX_SYNC_EXTI_LINE9 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line9 */ +#define LL_DMAMUX_SYNC_EXTI_LINE10 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line10 */ +#define LL_DMAMUX_SYNC_EXTI_LINE11 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line11 */ +#define LL_DMAMUX_SYNC_EXTI_LINE12 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from EXTI Line12 */ +#define LL_DMAMUX_SYNC_EXTI_LINE13 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE14 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line1 4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE15 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 5 */ +#define LL_DMAMUX_SYNC_DMAMUX_CH0 DMAMUX_CxCR_SYNC_ID_4 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH1 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel1 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH2 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from DMAMUX channel2 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH3 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define LL_DMAMUX_SYNC_LPTIM1_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define LL_DMAMUX_SYNC_LPTIM2_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from LPTIM2 Output */ +#endif +#define LL_DMAMUX_SYNC_TIM14_OC (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from TIM14 OC */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GENERATOR Request Generator Channel + * @{ + */ +#define LL_DMAMUX_REQ_GEN_0 0x00000000U +#define LL_DMAMUX_REQ_GEN_1 0x00000001U +#define LL_DMAMUX_REQ_GEN_2 0x00000002U +#define LL_DMAMUX_REQ_GEN_3 0x00000003U +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN_POLARITY External Request Signal Generation Polarity + * @{ + */ +#define LL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< No external DMA request generation */ +#define LL_DMAMUX_REQ_GEN_POL_RISING DMAMUX_RGxCR_GPOL_0 /*!< External DMA request generation on event on rising edge */ +#define LL_DMAMUX_REQ_GEN_POL_FALLING DMAMUX_RGxCR_GPOL_1 /*!< External DMA request generation on event on falling edge */ +#define LL_DMAMUX_REQ_GEN_POL_RISING_FALLING (DMAMUX_RGxCR_GPOL_0 | DMAMUX_RGxCR_GPOL_1) /*!< External DMA request generation on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN External Request Signal Generation + * @{ + */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE0 0x00000000U /*!< Request signal generation from EXTI Line0 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE1 DMAMUX_RGxCR_SIG_ID_0 /*!< Request signal generation from EXTI Line1 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE2 DMAMUX_RGxCR_SIG_ID_1 /*!< Request signal generation from EXTI Line2 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE3 (DMAMUX_RGxCR_SIG_ID_1 |DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line3 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE4 DMAMUX_RGxCR_SIG_ID_2 /*!< Request signal generation from EXTI Line4 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE5 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line5 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE6 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line6 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE7 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line7 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE8 DMAMUX_RGxCR_SIG_ID_3 /*!< Request signal generation from EXTI Line8 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE9 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line9 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE10 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line10 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE11 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line11 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE12 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from EXTI Line12 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE13 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line13 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE14 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line14 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE15 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line15 */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH0 DMAMUX_RGxCR_SIG_ID_4 /*!< Request signal generation from DMAMUX channel0 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH1 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel1 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH2 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from DMAMUX channel2 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH3 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define LL_DMAMUX_REQ_GEN_LPTIM1_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define LL_DMAMUX_REQ_GEN_LPTIM2_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from LPTIM2 Output */ +#endif +#define LL_DMAMUX_REQ_GEN_TIM14_OC (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from TIM14 OC */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR NBREQ LL_DMAMUX_SetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ, ((RequestNb - 1U) << DMAMUX_CxCR_NBREQ_Pos)); +} + +/** + * @brief Get the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR NBREQ LL_DMAMUX_GetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ)) >> DMAMUX_CxCR_NBREQ_Pos) + 1U); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is synchronized. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SPOL LL_DMAMUX_SetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is synchronized. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SPOL LL_DMAMUX_GetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL)); +} + +/** + * @brief Enable the Event Generation on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_EnableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Disable the Event Generation on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_DisableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Check if the Event Generation on DMAMUX channel x is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_IsEnabledEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the synchronization mode. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_EnableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Disable the synchronization mode. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_DisableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Check if the synchronization mode is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_IsEnabledSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL); +} + +/** + * @brief Set DMAMUX synchronization ID on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SYNC_ID LL_DMAMUX_SetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param SyncID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t SyncID) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID, SyncID); +} + +/** + * @brief Get DMAMUX synchronization ID on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SYNC_ID LL_DMAMUX_GetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID)); +} + +/** + * @brief Enable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_EnableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Disable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_DisableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Check if the Request Generator is enabled or disabled. + * @rmtoll RGxCR GE LL_DMAMUX_IsEnabledRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_SetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_GetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a generation event. + * @note This field can only be written when Generator is disabled. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_SetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ, (RequestNb - 1U) << DMAMUX_RGxCR_GNBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a generation event. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_GetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ) >> DMAMUX_RGxCR_GNBREQ_Pos) + 1U); +} + +/** + * @brief Set DMAMUX external Request Signal ID on DMAMUX Request Generation Trigger Event Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_SetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestSignalID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestSignalID) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID, RequestSignalID); +} + +/** + * @brief Get DMAMUX external Request Signal ID set on DMAMUX Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_GetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID)); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Synchronization Event Overrun Flag Channel 0. + * @rmtoll CSR SOF0 LL_DMAMUX_IsActiveFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF0) == (DMAMUX_CSR_SOF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 1. + * @rmtoll CSR SOF1 LL_DMAMUX_IsActiveFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF1) == (DMAMUX_CSR_SOF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 2. + * @rmtoll CSR SOF2 LL_DMAMUX_IsActiveFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF2) == (DMAMUX_CSR_SOF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 3. + * @rmtoll CSR SOF3 LL_DMAMUX_IsActiveFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF3) == (DMAMUX_CSR_SOF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 4. + * @rmtoll CSR SOF4 LL_DMAMUX_IsActiveFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF4) == (DMAMUX_CSR_SOF4)) ? 1UL : 0UL); +} + +#if defined(DMAMUX1_Channel5) +/** + * @brief Get Synchronization Event Overrun Flag Channel 5. + * @rmtoll CSR SOF5 LL_DMAMUX_IsActiveFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF5) == (DMAMUX_CSR_SOF5)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel6) +/** + * @brief Get Synchronization Event Overrun Flag Channel 6. + * @rmtoll CSR SOF6 LL_DMAMUX_IsActiveFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF6) == (DMAMUX_CSR_SOF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel7) +/** + * @brief Get Synchronization Event Overrun Flag Channel 7. + * @rmtoll CSR SOF7 LL_DMAMUX_IsActiveFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF7) == (DMAMUX_CSR_SOF7)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel8) +/** + * @brief Get Synchronization Event Overrun Flag Channel 8. + * @rmtoll CSR SOF8 LL_DMAMUX_IsActiveFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF8) == (DMAMUX_CSR_SOF8)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel9) +/** + * @brief Get Synchronization Event Overrun Flag Channel 9. + * @rmtoll CSR SOF9 LL_DMAMUX_IsActiveFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF9) == (DMAMUX_CSR_SOF9)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel10) +/** + * @brief Get Synchronization Event Overrun Flag Channel 10. + * @rmtoll CSR SOF10 LL_DMAMUX_IsActiveFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF10) == (DMAMUX_CSR_SOF10)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel11) +/** + * @brief Get Synchronization Event Overrun Flag Channel 11. + * @rmtoll CSR SOF11 LL_DMAMUX_IsActiveFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF11) == (DMAMUX_CSR_SOF11)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF0) == (DMAMUX_RGSR_OF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGSR OF1 LL_DMAMUX_IsActiveFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF1) == (DMAMUX_RGSR_OF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGSR OF2 LL_DMAMUX_IsActiveFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF2) == (DMAMUX_RGSR_OF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGSR OF3 LL_DMAMUX_IsActiveFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF3) == (DMAMUX_RGSR_OF3)) ? 1UL : 0UL); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 0. + * @rmtoll CFR CSOF0 LL_DMAMUX_ClearFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF0); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 1. + * @rmtoll CFR CSOF1 LL_DMAMUX_ClearFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF1); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 2. + * @rmtoll CFR CSOF2 LL_DMAMUX_ClearFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF2); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 3. + * @rmtoll CFR CSOF3 LL_DMAMUX_ClearFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF3); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 4. + * @rmtoll CFR CSOF4 LL_DMAMUX_ClearFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF4); +} + +#if defined(DMAMUX1_Channel5) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 5. + * @rmtoll CFR CSOF5 LL_DMAMUX_ClearFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF5); +} + +#endif +#if defined(DMAMUX1_Channel6) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 6. + * @rmtoll CFR CSOF6 LL_DMAMUX_ClearFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF6); +} + +#endif +#if defined(DMAMUX1_Channel7) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 7. + * @rmtoll CFR CSOF7 LL_DMAMUX_ClearFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF7); +} + +#endif +#if defined(DMAMUX1_Channel8) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 8. + * @rmtoll CFR CSOF8 LL_DMAMUX_ClearFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF8); +} + +#endif +#if defined(DMAMUX1_Channel9) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 9. + * @rmtoll CFR CSOF9 LL_DMAMUX_ClearFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF9); +} + +#endif +#if defined(DMAMUX1_Channel10) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 10. + * @rmtoll CFR CSOF10 LL_DMAMUX_ClearFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF10); +} + +#endif +#if defined(DMAMUX1_Channel11) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 11. + * @rmtoll CFR CSOF11 LL_DMAMUX_ClearFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF11); +} + +#endif +/** + * @brief Clear Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF0); +} + +/** + * @brief Clear Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF1 LL_DMAMUX_ClearFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF1); +} + +/** + * @brief Clear Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF2 LL_DMAMUX_ClearFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF2); +} + +/** + * @brief Clear Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF3 LL_DMAMUX_ClearFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF3); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_EnableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Disable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_DisableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Check if the Synchronization Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_IsEnabledIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE)) == (DMAMUX_CxCR_SOIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_EnableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Disable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_DisableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Check if the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll RGxCR OIE LL_DMAMUX_IsEnabledIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_DMAMUX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h new file mode 100644 index 0000000..6ccd2b8 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h @@ -0,0 +1,3886 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_RCC_H +#define STM32G0xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ + + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 48000000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +#if defined(RCC_HSI48_SUPPORT) +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ +#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_PWRRSTF RCC_CSR_PWRRSTF /*!< BOR or POR/PDR reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Selection + * @{ + */ +#define LL_RCC_LSCO_CLKSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock */ +#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_1 /*!< PLL selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_1 /*!< PLL used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 0x00000000U /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 0x00000000U /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE_2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSI_DIV HSI division factor + * @{ + */ +#define LL_RCC_HSI_DIV_1 0x00000000U /*!< HSI not divided */ +#define LL_RCC_HSI_DIV_2 RCC_CR_HSIDIV_0 /*!< HSI divided by 2 */ +#define LL_RCC_HSI_DIV_4 RCC_CR_HSIDIV_1 /*!< HSI divided by 4 */ +#define LL_RCC_HSI_DIV_8 (RCC_CR_HSIDIV_1 | RCC_CR_HSIDIV_0) /*!< HSI divided by 8 */ +#define LL_RCC_HSI_DIV_16 RCC_CR_HSIDIV_2 /*!< HSI divided by 16 */ +#define LL_RCC_HSI_DIV_32 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_0) /*!< HSI divided by 32 */ +#define LL_RCC_HSI_DIV_64 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_1) /*!< HSI divided by 64 */ +#define LL_RCC_HSI_DIV_128 RCC_CR_HSIDIV /*!< HSI divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_1 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI16 selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_CFGR_MCOSEL_3) +#define LL_RCC_MCO1SOURCE_PLLPCLK RCC_CFGR_MCOSEL_3 /*!< PLLPCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLQCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_0) /*!< PLLQCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_RTCCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1) /*!< RTCCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_RTC_WKUP (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_0) /*!< RTC_Wakeup selection as MCO1 source */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 0x00000000U /*!< MCO1 not divided */ +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO1 divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO1 divided by 4 */ +#define LL_RCC_MCO1_DIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO1 divided by 16 */ +#define LL_RCC_MCO1_DIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 32 */ +#define LL_RCC_MCO1_DIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO1 divided by 64 */ +#define LL_RCC_MCO1_DIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 128 */ +#if defined(RCC_CFGR_MCOPRE_3) +#define LL_RCC_MCO1_DIV_256 RCC_CFGR_MCOPRE_3 /*!< MCO divided by 256 */ +#define LL_RCC_MCO1_DIV_512 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 512 */ +#define LL_RCC_MCO1_DIV_1024 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 1024 */ +#endif /* RCC_CFGR_MCOPRE_3 */ +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_LL_EC_MCO2SOURCE MCO2 SOURCE selection + * @{ + */ +#define LL_RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO2SOURCE_HSI48 RCC_CFGR_MCO2SEL_1 /*!< HSI48 selection as MCO2 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< HSI16 selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLCLK (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_0) /*!< Main PLL "R" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_1) /*!< LSI selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< LSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLPCLK RCC_CFGR_MCO2SEL_3 /*!< PLL "P" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLQCLK (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_0) /*!< PLL "Q" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_RTCCLK (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_1) /*!< RTC Clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< RTC Wakeup timer selection as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO2_DIV MCO2 prescaler + * @{ + */ +#define LL_RCC_MCO2_DIV_1 0x00000000U /*!< MCO2 not divided */ +#define LL_RCC_MCO2_DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO2 divided by 2 */ +#define LL_RCC_MCO2_DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO2 divided by 4 */ +#define LL_RCC_MCO2_DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 8 */ +#define LL_RCC_MCO2_DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO2 divided by 16 */ +#define LL_RCC_MCO2_DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 32 */ +#define LL_RCC_MCO2_DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 64 */ +#define LL_RCC_MCO2_DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 128 */ +#define LL_RCC_MCO2_DIV_256 RCC_CFGR_MCO2PRE_3 /*!< MCO2 divided by 256 */ +#define LL_RCC_MCO2_DIV_512 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 512 */ +#define LL_RCC_MCO2_DIV_1024 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 1024 */ +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_HSI ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_1) /*!< HSI clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_LSE ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL) /*!< LSE clock used as USART1 clock source */ +#define LL_RCC_USART2_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_HSI ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_1) /*!< HSI clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_LSE ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL) /*!< LSE clock used as USART2 clock source */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART3SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_HSI ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_1) /*!< HSI clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_LSE ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL) /*!< LSE clock used as USART3 clock source */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(LPUART1) || defined(LPUART2) +/** @defgroup RCC_LL_EC_LPUARTx_CLKSOURCE Peripheral LPUART clock source selection + * @{ + */ +#if defined(LPUART2) +#define LL_RCC_LPUART2_CLKSOURCE_PCLK1 ((RCC_CCIPR_LPUART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL_0) /*!< SYSCLK clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_HSI ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL_1) /*!< HSI clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_LSE ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL) /*!< LSE clock used as LPUART2 clock source */ +#endif /* LPUART2 */ +#define LL_RCC_LPUART1_CLKSOURCE_PCLK1 ((RCC_CCIPR_LPUART1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL_0) /*!< SYSCLK clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_HSI ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL_1) /*!< HSI clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_LSE ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL) /*!< LSE clock used as LPUART1 clock source */ +/** + * @} + */ +#endif /* LPUART1 || LPUART2 */ + +/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE_PCLK1 ((RCC_CCIPR_I2C1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_SYSCLK ((RCC_CCIPR_I2C1SEL << 16U) | RCC_CCIPR_I2C1SEL_0) /*!< SYSCLK clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_HSI ((RCC_CCIPR_I2C1SEL << 16U) | RCC_CCIPR_I2C1SEL_1) /*!< HSI clock used as I2C1 clock source */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE_PCLK1 ((RCC_CCIPR_I2C2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_SYSCLK ((RCC_CCIPR_I2C2SEL << 16U) | RCC_CCIPR_I2C2SEL_0) /*!< SYSCLK clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_HSI ((RCC_CCIPR_I2C2SEL << 16U) | RCC_CCIPR_I2C2SEL_1) /*!< HSI clock used as I2C2 clock source */ +#endif /* RCC_CCIPR_I2C2SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Sx_CLKSOURCE Peripheral I2S clock source selection + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_RCC_I2S1_CLKSOURCE_SYSCLK ((RCC_CCIPR2_I2S1SEL << 16U) | 0x00000000U) /*!< SYSCLK clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLL ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL_0) /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_HSI ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL_1) /*!< HSI clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL) /*!< External clock used as I2S1 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_SYSCLK ((RCC_CCIPR2_I2S2SEL << 16U) | 0x00000000U) /*!< SYSCLK clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PLL ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL_0) /*!< PLL clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_HSI ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL_1) /*!< HSI clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PIN ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL) /*!< External clock used as I2S2 clock source */ +#else +#define LL_RCC_I2S1_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLL RCC_CCIPR_I2S1SEL_0 /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_HSI RCC_CCIPR_I2S1SEL_1 /*!< HSI clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CCIPR_I2S1SEL /*!< External clock used as I2S1 clock source */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @} + */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCC_LL_EC_TIMx_CLKSOURCE Peripheral TIM clock source selection + * @{ + */ +#define LL_RCC_TIM1_CLKSOURCE_PCLK1 (RCC_CCIPR_TIM1SEL | (0x00000000U >> 16U)) /*!< PCLK1 clock used as TIM1 clock source */ +#define LL_RCC_TIM1_CLKSOURCE_PLL (RCC_CCIPR_TIM1SEL | (RCC_CCIPR_TIM1SEL >> 16U)) /*!< PLL used as TIM1 clock source */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @addtogroup RCC_LL_EC_TIMx_CLKSOURCE + * @{ + */ +#define LL_RCC_TIM15_CLKSOURCE_PCLK1 (RCC_CCIPR_TIM15SEL | (0x00000000U >> 16U)) /*!< PCLK1 clock used as TIM15 clock source */ +#define LL_RCC_TIM15_CLKSOURCE_PLL (RCC_CCIPR_TIM15SEL | (RCC_CCIPR_TIM15SEL >> 16U)) /*!< PLL used as TIM15 clock source */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** @defgroup RCC_LL_EC_LPTIMx_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 (RCC_CCIPR_LPTIM1SEL | (0x00000000U >> 16U)) /*!< PCLK1 selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16U)) /*!< LSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_HSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16U)) /*!< HSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSE (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16U)) /*!< LSE selected as LPTIM1 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK1 (RCC_CCIPR_LPTIM2SEL | (0x00000000U >> 16U)) /*!< PCLK1 selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16U)) /*!< LSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_HSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16U)) /*!< HSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSE (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16U)) /*!< LSE selected as LPTIM2 clock */ +/** + * @} + */ +#endif /* LPTIM1 && LPTIM2*/ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE_HSI Peripheral CEC clock source selection + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as CEC clock */ +#define LL_RCC_CEC_CLKSOURCE_LSE RCC_CCIPR_CECSEL /*!< LSE oscillator clock used as CEC clock */ + +/** + * @} +*/ +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN_CLKSOURCE_HSI Peripheral FDCAN clock source selection + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 oscillator clock used as FDCAN clock */ +#define LL_RCC_FDCAN_CLKSOURCE_PLL RCC_CCIPR2_FDCANSEL_0 /*!< PLL "Q" oscillator clock used as FDCAN clock */ +#define LL_RCC_FDCAN_CLKSOURCE_HSE RCC_CCIPR2_FDCANSEL_1 /*!< HSE oscillator clock used as FDCAN clock */ + +/** + * @} +*/ +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RNG clock */ +#define LL_RCC_RNG_CLKSOURCE_HSI_DIV8 RCC_CCIPR_RNGSEL_0 /*!< HSI oscillator clock divided by 8 used as RNG clock, available on cut2.0 */ +#define LL_RCC_RNG_CLKSOURCE_SYSCLK RCC_CCIPR_RNGSEL_1 /*!< SYSCLK divided by 1 used as RNG clock */ +#define LL_RCC_RNG_CLKSOURCE_PLL RCC_CCIPR_RNGSEL /*!< PLL used as RNG clock */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG_CLK_DIV Peripheral RNG clock division factor + * @{ + */ +#define LL_RCC_RNG_CLK_DIV1 0x00000000U /*!< RNG clock not divided */ +#define LL_RCC_RNG_CLK_DIV2 RCC_CCIPR_RNGDIV_0 /*!< RNG clock divided by 2 */ +#define LL_RCC_RNG_CLK_DIV4 RCC_CCIPR_RNGDIV_1 /*!< RNG clock divided by 4 */ +#define LL_RCC_RNG_CLK_DIV8 RCC_CCIPR_RNGDIV /*!< RNG clock divided by 8 */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_USB_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as USB clock source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_USB_CLKSOURCE_HSE RCC_CCIPR2_USBSEL_0 /*!< PLL clock used as USB clock source */ +#define LL_RCC_USB_CLKSOURCE_PLL RCC_CCIPR2_USBSEL_1 /*!< PLL clock used as USB clock source */ +/** + * @} + */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_PLL RCC_CCIPR_ADCSEL_0 /*!< PLL used as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_HSI RCC_CCIPR_ADCSEL_1 /*!< HSI used as ADC clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx Peripheral USARTx get clock source + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE RCC_CCIPR_USART1SEL /*!< USART1 Clock source selection */ +#define LL_RCC_USART2_CLKSOURCE RCC_CCIPR_USART2SEL /*!< USART2 Clock source selection */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE RCC_CCIPR_USART3SEL /*!< USART3 Clock source selection */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(LPUART1) +/** @defgroup RCC_LL_EC_LPUART1 Peripheral LPUART get clock source + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE RCC_CCIPR_LPUART1SEL /*!< LPUART1 Clock source selection */ +#if defined(LPUART2) +#define LL_RCC_LPUART2_CLKSOURCE RCC_CCIPR_LPUART2SEL /*!< LPUART2 Clock source selection */ +#endif /* LPUART2 */ +/** + * @} + */ +#endif /* LPUART1 */ + +/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE RCC_CCIPR_I2C1SEL /*!< I2C1 Clock source selection */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE RCC_CCIPR_I2C2SEL /*!< I2C2 Clock source selection */ +#endif /* RCC_CCIPR_I2C2SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_RCC_I2S1_CLKSOURCE RCC_CCIPR2_I2S1SEL /*!< I2S1 Clock source selection */ +#define LL_RCC_I2S2_CLKSOURCE RCC_CCIPR2_I2S2SEL /*!< I2S2 Clock source selection */ +#else +#define LL_RCC_I2S1_CLKSOURCE RCC_CCIPR_I2S1SEL /*!< I2S1 Clock source selection */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCC_LL_EC_TIMx Peripheral TIMx get clock source + * @{ + */ +#define LL_RCC_TIM1_CLKSOURCE RCC_CCIPR_TIM1SEL /*!< TIM1 Clock source selection */ +#if defined(RCC_CCIPR_TIM15SEL) +#define LL_RCC_TIM15_CLKSOURCE RCC_CCIPR_TIM15SEL /*!< TIM15 Clock source selection */ +#endif /* RCC_CCIPR_TIM15SEL */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE RCC_CCIPR_LPTIM1SEL /*!< LPTIM2 Clock source selection */ +#define LL_RCC_LPTIM2_CLKSOURCE RCC_CCIPR_LPTIM2SEL /*!< LPTIM2 Clock source selection */ +/** + * @} + */ +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE RCC_CCIPR_CECSEL /*!< CEC Clock source selection */ +/** + * @} + */ +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN Peripheral FDCAN get clock source + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE RCC_CCIPR2_FDCANSEL /*!< FDCAN Clock source selection */ +/** + * @} + */ +#endif /* FDCAN1 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#define LL_RCC_USB_CLKSOURCE RCC_CCIPR2_USBSEL /*!< USB Clock source selection */ +/** + * @} + */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE RCC_CCIPR_RNGSEL /*!< RNG Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RNG_DIV Peripheral RNG get clock division factor + * @{ + */ +#define LL_RCC_RNG_CLKDIV RCC_CCIPR_RNGDIV /*!< RNG Clock division factor */ +/** + * @} + */ +#endif /* RNG */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR_ADCSEL /*!< ADC Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLM_DIV PLL division factor (PLLM) + * @{ + */ +#define LL_RCC_PLLM_DIV_1 0x00000000U /*!< PLL division factor by 1 */ +#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_0) /*!< PLL division factor by 2 */ +#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1) /*!< PLL division factor by 3 */ +#define LL_RCC_PLLM_DIV_4 ((RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0)) /*!< PLL division factor by 4 */ +#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2) /*!< PLL division factor by 5 */ +#define LL_RCC_PLLM_DIV_6 ((RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0)) /*!< PLL division factor by 6 */ +#define LL_RCC_PLLM_DIV_7 ((RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1)) /*!< PLL division factor by 7 */ +#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM) /*!< PLL division factor by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) + * @{ + */ +#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ +#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */ +#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ +#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */ +#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ +#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */ +#define LL_RCC_PLLR_DIV_8 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) + * @{ + */ +#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 2 */ +#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 3 */ +#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 4 */ +#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 5 */ +#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 6 */ +#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 7 */ +#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 8 */ +#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 9 */ +#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 10 */ +#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 11 */ +#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 12 */ +#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 13 */ +#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 14 */ +#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 15 */ +#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 16 */ +#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 17 */ +#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 18 */ +#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 19 */ +#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 20 */ +#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 21 */ +#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 22 */ +#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 23 */ +#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 24 */ +#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 25 */ +#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 26 */ +#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 27*/ +#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 28 */ +#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 29 */ +#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 30 */ +#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 31 */ +#define LL_RCC_PLLP_DIV_32 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 32 */ +/** + * @} + */ + +#if defined(RCC_PLLQ_SUPPORT) +/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) + * @{ + */ +#define LL_RCC_PLLQ_DIV_2 (RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 2 */ +#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 3 */ +#define LL_RCC_PLLQ_DIV_4 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 4 */ +#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 5 */ +#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 6 */ +#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 7 */ +#define LL_RCC_PLLQ_DIV_8 (RCC_PLLCFGR_PLLQ) /*!< Main PLL division factor for PLLQ output by 8 */ +/** + * @} + */ +#endif /* RCC_PLLQ_SUPPORT */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG((RCC->__REG__), (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency on system domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U)) + +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on I2S domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S1_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on I2S2 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S2_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S2_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on ADC domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) + +#if defined(RNG) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on RNG domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_RNG_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_RNG_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* RNG */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on TIM1 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_TIM1_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_TIM1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#if defined(TIM15) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on TIM15 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_TIM15_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_TIM15_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* TIM15 */ +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on FDCAN domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FDCAN_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FDCAN_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on USB domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_USB_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_USB_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__,__AHBPRESCALER__) \ + ((__SYSCLKFREQ__) >> (AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) \ + ((__HCLKFREQ__) >> (APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE_Pos] & 0x1FU)) + +/** + * @brief Helper macro to calculate the HSISYS frequency + * @param __HSIDIV__ This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval HSISYS clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HSI_FREQ(__HSIDIV__) (HSI_VALUE / (1U << ((__HSIDIV__)>> RCC_CR_HSIDIV_Pos))) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI even in stop mode + * @note HSI oscillator is forced ON even in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI in stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_DisableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Check if HSI in stop mode is enabled + * @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledInStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIKERON) == (RCC_CR_HSIKERON)) ? 1UL : 0UL); +} + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_ICSCR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 64, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 127 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 + * @rmtoll CR HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Disable HSI48 + * @rmtoll CR HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Check if HSI48 oscillator Ready + * @rmtoll CR HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == RCC_CR_HSI48RDY) ? 1UL : 0UL); +} + +/** + * @brief Get HSI48 Calibration value + * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0x1FF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos); +} + +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Enable Clock security system on LSE. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Disable Clock security system on LSE. + * @note Clock security system can be disabled only after a LSE + * failure detection. In that case it MUST be disabled by software. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)) ? 1UL : 0UL); +} + +/** + * @brief Check if CSS on LSE failure Detection + * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsCSSDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == (RCC_BDCR_LSECSSD)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSCO LSCO + * @{ + */ + +/** + * @brief Enable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Disable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Configure Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_SetSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL, Source); +} + +/** + * @brief Get Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSCOSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, Prescaler); +} + +/** + * @brief Set HSI16 division factor + * @rmtoll CR HSIDIV LL_RCC_SetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @param HSIDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetHSIDiv(uint32_t HSIDiv) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, HSIDiv); +} +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE)); +} + +/** + * @brief Get HSI16 Division factor + * @rmtoll CR HSIDIV LL_RCC_GetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + */ +__STATIC_INLINE uint32_t LL_RCC_GetHSIDiv(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO1 MCO1 + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n + * CFGR MCOPRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*) + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO1SOURCE_LSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLPCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLQCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_RTCCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_RTC_WKUP (*) + * + * (*) value not defined in all devices. + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_32 + * @arg @ref LL_RCC_MCO1_DIV_64 + * @arg @ref LL_RCC_MCO1_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_LL_EF_MCO2 MCO2 + * @{ + */ + +/** + * @brief Configure MCO2 + * @rmtoll CFGR MCO2SEL LL_RCC_ConfigMCO2\n + * CFGR MCO2PRE LL_RCC_ConfigMCO2 + * @note feature not available in all devices. + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_HSI + * @arg @ref LL_RCC_MCO2SOURCE_HSI48 + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO2SOURCE_LSI + * @arg @ref LL_RCC_MCO2SOURCE_LSE + * @arg @ref LL_RCC_MCO2SOURCE_PLLPCLK + * @arg @ref LL_RCC_MCO2SOURCE_PLLQCLK + * @arg @ref LL_RCC_MCO2SOURCE_RTCCLK + * @arg @ref LL_RCC_MCO2SOURCE_RTC_WKUP + * + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_8 + * @arg @ref LL_RCC_MCO2_DIV_16 + * @arg @ref LL_RCC_MCO2_DIV_32 + * @arg @ref LL_RCC_MCO2_DIV_64 + * @arg @ref LL_RCC_MCO2_DIV_128 + * @arg @ref LL_RCC_MCO2_DIV_256 + * @arg @ref LL_RCC_MCO2_DIV_512 + * @arg @ref LL_RCC_MCO2_DIV_1024 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO2(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_SetUSARTClockSource + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (USARTxSource >> 16U), (USARTxSource & 0x0000FFFFU)); +} + +#if defined(LPUART1) +/** + * @brief Configure LPUARTx clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource + * @rmtoll CCIPR LPUART2SEL LL_RCC_SetLPUARTClockSource + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (LPUARTxSource >> 16U), (LPUARTxSource & 0x0000FFFFU)); +} +#endif /* LPUART1 */ + +/** + * @brief Configure I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_SetI2CClockSource + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*) + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) +{ + MODIFY_REG(RCC->CCIPR, (I2CxSource >> 16U), (I2CxSource & 0x0000FFFFU)); +} + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Configure TIMx clock source + * @rmtoll CCIPR TIMxSEL LL_RCC_SetTIMClockSource + * @param TIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK1 + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK1 + * @endif + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetTIMClockSource(uint32_t TIMxSource) +{ + MODIFY_REG(RCC->CCIPR, (TIMxSource & 0xFFFF0000U), (TIMxSource << 16)); +} +#endif /* RCC_CCIPR_TIM1SEL && RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Configure LPTIMx clock source + * @rmtoll CCIPR LPTIMxSEL LL_RCC_SetLPTIMClockSource + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) +{ + MODIFY_REG(RCC->CCIPR, (LPTIMxSource & 0xFFFF0000U), (LPTIMxSource << 16U)); +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(CEC) +/** + * @brief Configure CEC clock source + * @rmtoll CCIPR CECSEL LL_RCC_SetCECClockSource + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t CECxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, CECxSource); +} +#endif /* CEC */ + +#if defined(RCC_CCIPR_RNGDIV) +/** + * @brief Configure RNG division factor + * @rmtoll CCIPR RNGDIV LL_RCC_SetRNGClockDiv + * @param RNGxDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLK_DIV1 + * @arg @ref LL_RCC_RNG_CLK_DIV2 + * @arg @ref LL_RCC_RNG_CLK_DIV4 + * @arg @ref LL_RCC_RNG_CLK_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockDiv(uint32_t RNGxDiv) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, RNGxDiv); +} +#endif /* RNG */ + +#if defined (RCC_CCIPR_RNGSEL) +/** + * @brief Configure RNG clock source + * @rmtoll CCIPR RNGSEL LL_RCC_SetRNGClockSource + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI_DIV8 + * @arg @ref LL_RCC_RNG_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, RNGxSource); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure USB clock source + * @rmtoll CCIPR2 CK48MSEL LL_RCC_SetUSBClockSource + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_USB_CLKSOURCE_HSE + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, USBxSource); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined (FDCAN1) || defined (FDCAN2) +/** + * @brief Configure FDCAN clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_SetFDCANClockSource + * @param FDCANxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFDCANClockSource(uint32_t FDCANxSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, FDCANxSource); +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Configure ADC clock source + * @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR2 I2SxSEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S2_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR2, (I2SxSource >> 16U), (I2SxSource & 0x0000FFFFU)); +} + +#else +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR I2S1SEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, I2SxSource); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Get USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_GetUSARTClockSource + * @param USARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE + * @arg @ref LL_RCC_USART3_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx) | (USARTx << 16U)); +} + +#if defined (LPUART2) || defined (LPUART1) +/** + * @brief Get LPUARTx clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource\n + * CCIPR LPUART2SEL LL_RCC_GetLPUARTClockSource + * @param LPUARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, LPUARTx) | (LPUARTx << 16U)); +} +#endif /* LPUART2 || LPUART1 */ + +/** + * @brief Get I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_GetI2CClockSource\n + * CCIPR I2C2SEL LL_RCC_GetI2CClockSource + * @param I2Cx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @arg @ref LL_RCC_I2C2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Cx) | (I2Cx << 16U)); +} + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Get TIMx clock source + * @rmtoll CCIPR TIMxSEL LL_RCC_GetTIMClockSource + * @param TIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE + * @arg @ref LL_RCC_TIM15_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK1 + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK1 + * @endif + */ +__STATIC_INLINE uint32_t LL_RCC_GetTIMClockSource(uint32_t TIMx) +{ + return (uint32_t)((READ_BIT(RCC->CCIPR, TIMx) >> 16U) | TIMx); +} +#endif /* RCC_CCIPR_TIM1SEL || RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Get LPTIMx clock source + * @rmtoll CCIPR LPTIM1SEL LL_RCC_GetLPTIMClockSource\n + CCIPR LPTIM2SEL LL_RCC_GetLPTIMClockSource + * @param LPTIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) +{ + return (uint32_t)((READ_BIT(RCC->CCIPR, LPTIMx) >> 16U) | LPTIMx); +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined (RCC_CCIPR_CECSEL) +/** + * @brief Get CEC clock source + * @rmtoll CCIPR CECSEL LL_RCC_GetCECClockSource + * @param CECx This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, CECx)); +} +#endif /* CEC */ + +#if defined(RCC_CCIPR2_FDCANSEL) +/** + * @brief Get FDCAN clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_GetFDCANClockSource + * @param FDCANx This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetFDCANClockSource(uint32_t FDCANx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, FDCANx)); +} +#endif /* RCC_CCIPR2_FDCANSEL */ + +#if defined(RNG) +/** + * @brief Get RNGx clock source + * @rmtoll CCIPR RNGSEL LL_RCC_GetRNGClockSource + * @param RNGx This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI_DIV8 + * @arg @ref LL_RCC_RNG_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, RNGx)); +} +#endif /* RNG */ + +#if defined(RNG) +/** + * @brief Get RNGx clock division factor + * @rmtoll CCIPR RNGDIV LL_RCC_GetRNGClockDiv + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLK_DIV1 + * @arg @ref LL_RCC_RNG_CLK_DIV2 + * @arg @ref LL_RCC_RNG_CLK_DIV4 + * @arg @ref LL_RCC_RNG_CLK_DIV8 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockDiv(void) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Get USBx clock source + * @rmtoll CCIPR2 CK48MSEL LL_RCC_GetUSBClockSource + * @param USBx This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, USBx)); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Get ADCx clock source + * @rmtoll CCIPR ADCSEL LL_RCC_GetADCClockSource + * @param ADCx This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx)); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR2 I2S1SEL LL_RCC_GetI2SClockSource\n + * CCIPR2 I2S2SEL LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @arg @ref LL_RCC_I2S2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, I2Sx) | (I2Sx << 16U)); +} +#else +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR I2S1SEL LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Sx)); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)) ? 1UL : 0UL); +} + +/** + * @brief Configure PLL used for SYSCLK Domain + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLR can be written only when PLL is disabled + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLR); +} + +/** + * @brief Configure PLL used for ADC domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: I2S1) + * @note This can be selected for ADC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_ADC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} + +/** + * @brief Configure PLL used for I2S1 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: ADC) + * @note This can be selected for I2S1 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_I2S1 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S1(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Configure PLL used for I2S2 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: ADC) + * @note This can be selected for I2S2 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_I2S2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S2(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Configure PLL used for RNG domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for RNG + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_RNG + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_RNG(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Configure PLL used for FDCAN domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for FDCAN + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_FDCAN + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_FDCAN(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure PLL used for USB domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for USB + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_USB + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_USB(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Configure PLL used for TIM1 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: RNG, TIM15) + * @note This can be selected for TIM1 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_TIM1 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_TIM1(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Configure PLL used for TIM15 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: RNG, TIM1) + * @note This can be selected for TIM15 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_TIM15 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_TIM15(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ + +/** + * @brief Get Main PLL multiplication factor for VCO + * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN + * @retval Between 8 and 86 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); +} + +/** + * @brief Get Main PLL division factor for PLLP + * @note used for PLLPCLK (ADC & I2S clock) + * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); +} + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Get Main PLL division factor for PLLQ + * @note used for PLLQCLK selected for RNG, TIM1, TIM15 clock + * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); +} +#endif /* RCC_PLLQ_SUPPORT */ + +/** + * @brief Get Main PLL division factor for PLLR + * @note used for PLLCLK (system clock) + * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); +} + +/** + * @brief Configure PLL clock source + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); +} + +/** + * @brief Get Division factor for the main PLL and other PLL + * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); +} + +/** + * @brief Enable PLL output mapped on ADC domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_ADC + * @note User shall check that PLL enable is not done through + * other functions (ex: I2S1) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_ADC(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Disable PLL output mapped on ADC domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: I2S1) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_ADC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_ADC(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Enable PLL output mapped on I2S domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_I2S1 + * @note User shall check that PLL enable is not done through + * other functions (ex: ADC) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_I2S1(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Enable PLL output mapped on I2S2 domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_I2S2 + * @note User shall check that PLL enable is not done through + * other functions (ex: ADC) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_I2S2(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** + * @brief Disable PLL output mapped on I2S1 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_I2S1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_I2S1(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Disable PLL output mapped on I2S2 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_I2S2 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_I2S2(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Enable PLL output mapped on RNG domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_RNG + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_RNG(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on RNG domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_RNG + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_RNG(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Enable PLL output mapped on FDCAN domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_FDCAN + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_FDCAN(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on FDCAN domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_FDCAN + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_FDCAN(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Enable PLL output mapped on USB domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_USB + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_USB(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on USB domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_USB + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_USB(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Enable PLL output mapped on TIM1 domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_TIM1 + * @note User shall check that PLL enable is not done through + * other functions (ex: RNG, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_TIM1(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on TIM1 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_TIM1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_TIM1(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Enable PLL output mapped on TIM15 domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_TIM15 + * @note User shall check that PLL enable is not done through + * other functions (ex: RNG, TIM1) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_TIM15(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on TIM15 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG, TIM1) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_TIM15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_TIM15(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ + +/** + * @brief Enable PLL output mapped on SYSCLK domain + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_EnableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SYS(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @brief Disable PLL output mapped on SYSCLK domain + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note In order to save power, when the PLLCLK of the PLL is + * not used, Main PLL should be 0 + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_DisableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @} + */ + + + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CICR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); +} +#endif /* RCC_HSI48_SUPPORT */ +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CICR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSSC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF)) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF)) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIFR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == (RCC_CIFR_CSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Option byte reset is set or not. + * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR or POR/PDR reset is set or not. + * @rmtoll CSR PWRRSTF LL_RCC_IsActiveFlag_PWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PWRRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PWRRSTF) == (RCC_CSR_PWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == (RCC_CIER_LSIRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == (RCC_CIER_LSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == (RCC_CIER_HSIRDYIE)) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == (RCC_CIER_HSI48RDYIE)) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == (RCC_CIER_HSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIER PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLLRDYIE) == (RCC_CIER_PLLRDYIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +#if defined(LPUART1) || defined(LPUART2) +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +#endif /* LPUART1 */ +#if defined(LPTIM1) && defined(LPTIM2) +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +#endif /* LPTIM1 && LPTIM2 */ +#if defined(RNG) +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +#endif /* RNG */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); +#if defined(CEC) +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +#endif /* CEC */ +#if defined(FDCAN1) || defined(FDCAN2) +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource); +#endif /* FDCAN1 */ +uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource); +uint32_t LL_RCC_GetRTCClockFreq(void); +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h new file mode 100644 index 0000000..dd4e612 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h @@ -0,0 +1,881 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_USB_H +#define STM32G0xx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined (USB_DRD_FS) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief USB Mode definition + */ + + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1 +} USB_DRD_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_DRD_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR, + HC_ACK +} USB_DRD_HCStateTypeDef; + +/** + * USB HOST Double buffer Isochronous State + */ +typedef enum +{ + USB_PMABUF_EMPTY = 0U, + USB_PMABUF_NOT_EMPTY = 1U +} USB_BuffStateTypedDef; + +/** + * @brief USB Instance Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref USB_Core_Speed */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref USB_Core_PHY */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ + + uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint32_t bulk_doublebuffer_enable; /*!< Enable or disable the double buffer mode on bulk EP */ + + uint32_t iso_singlebuffer_enable; /*!< Enable or disable the Single buffer mode on Isochronous EP */ +} USB_DRD_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type_ */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + + uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ + + uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ +} USB_DRD_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t phy_ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ch_dir; /*!< channel direction + This parameter store the physical channel direction IN/OUT/BIDIR */ + + uint8_t speed; /*!< USB Host speed. + This parameter can be any value of @ref USB_Core_Speed_ */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_EP_Type_ */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_len_db; /*!< Current transfer length used in double buffer mode. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t ErrCnt; /*!< Host channel error count. */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + USB_BuffStateTypedDef pmabuff0_state; /*!< PMA Buffer0 State empty / notEmpty : used in double buffer OUT isochronous */ + + USB_BuffStateTypedDef pmabuff1_state; /*!< PMA Buffer1 State empty / notEmpty : used in double buffer OUT isochronous */ + + USB_DRD_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ + + USB_DRD_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ +} USB_DRD_HCTypeDef; + + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + + +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_FS_SPEED 2U +#define USBH_FSLS_SPEED 1U +/** + * @} + */ + +#define BTABLE_ADDRESS 0x000U + +#define EP_ADDR_MSK 0x7U + +/*!< USB Speed */ +#define USB_DRD_SPEED_FS 1U +#define USB_DRD_SPEED_LS 2U +#define USB_DRD_SPEED_LSFS 3U + +/*!< PID */ +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U + +/*!< Channel Direction */ +#define CH_IN_DIR 1U +#define CH_OUT_DIR 0U + +/*!< Number of used channels in the Application */ +#ifndef USB_DRD_USED_CHANNELS +#define USB_DRD_USED_CHANNELS 8U +#endif /* USB_DRD_USED_CHANNELS */ + +/* First available address in PMA */ +#define PMA_START_ADDR (0x10U + (8U *(USB_DRD_USED_CHANNELS - 2U))) +#define PMA_END_ADDR USB_DRD_PMA_SIZE + + +/** + * used for USB_HC_DoubleBuffer API + */ +#define USB_DRD_DBUFF_ENBALE 1U +#define USB_DRD_DBUFF_DISABLE 2U + + +/* Exported macro ------------------------------------------------------------*/ +/** + * @} + */ +/******************** Bit definition for USB_COUNTn_RX register *************/ +#define USB_CNTRX_NBLK_MSK (0x1FU << 26) +#define USB_CNTRX_BLSIZE (0x1U << 31) + + +/*Set Channel/Endpoint to the USB Register */ +#define USB_DRD_SET_CHEP(USBx, bEpChNum, wRegValue) (*(__IO uint32_t *)(&(USBx)->CHEP0R + (bEpChNum)) = (uint32_t)(wRegValue)) + +/*Get Channel/Endpoint from the USB Register */ +#define USB_DRD_GET_CHEP(USBx, bEpChNum) (*(__IO uint32_t *)(&(USBx)->CHEP0R + (bEpChNum))) + + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpChNum, bDir + * @retval None + */ +#define USB_DRD_FreeUserBuffer(USBx, bEpChNum, bDir) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT double buffered endpoint */ \ + USB_DRD_TX_DTOG((USBx), (bEpChNum)); \ + } \ + else if ((bDir) == 1U) \ + { \ + /* IN double buffered endpoint */ \ + USB_DRD_RX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) + + +/** + * @brief Set the Setup bit in the corresponding channel, when a Setup + transaction is needed. + * @param USBx USB device. + * @param bEpChNum + * @retval None + */ +#define USB_DRD_CHEP_TX_SETUP(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) ; \ + \ + /*Set Setup bit*/ \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_SETUP)); \ + } while(0) + + +/** + * @brief Clears bit ERR_RX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_RX_ERR(USBx, bChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bChNum)); \ + _wRegVal = (_wRegVal & USB_CHEP_REG_MASK & (~USB_CHEP_ERRRX) & (~USB_CHEP_VTRX)) | \ + (USB_CHEP_VTTX | USB_CHEP_ERRTX); \ + \ + USB_DRD_SET_CHEP((USBx), (bChNum), _wRegVal); \ + } while(0) /* USB_DRD_CLEAR_CHEP_RX_ERR */ + + +/** + * @brief Clears bit ERR_TX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_TX_ERR(USBx, bChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bChNum)); \ + _wRegVal = (_wRegVal & USB_CHEP_REG_MASK & (~USB_CHEP_ERRTX) & (~USB_CHEP_VTTX)) | \ + (USB_CHEP_VTRX|USB_CHEP_ERRRX); \ + \ + USB_DRD_SET_CHEP((USBx), (bChNum), _wRegVal); \ + } while(0) /* USB_DRD_CLEAR_CHEP_TX_ERR */ + + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define USB_DRD_SET_CHEP_TX_STATUS(USBx, bEpChNum, wState) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_TX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_CHEP_TX_DTOG1 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_TX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_CHEP_TX_DTOG2 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_TX_DTOG2; \ + } \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX| USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_TX_STATUS */ + + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define USB_DRD_SET_CHEP_RX_STATUS(USBx, bEpChNum, wState) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_RX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_CHEP_RX_DTOG1 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_RX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_CHEP_RX_DTOG2 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_RX_DTOG2; \ + } \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_RX_STATUS */ + + +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval status + */ +#define USB_DRD_GET_CHEP_TX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_TX_STTX) +#define USB_DRD_GET_CHEP_RX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_RX_STRX) + + +/** + * @brief set EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_SET_CHEP_KIND(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_KIND)); \ + } while(0) /* USB_DRD_SET_CHEP_KIND */ + + +/** + * @brief clear EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_KIND(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_EP_KIND_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_CLEAR_CHEP_KIND */ + + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_RX_CHEP_CTR(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & (0xFFFF7FFFU & USB_CHEP_REG_MASK); \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTTX)); \ + } while(0) /* USB_CLEAR_RX_CHEP_CTR */ + +#define USB_DRD_CLEAR_TX_CHEP_CTR(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & (0xFFFFFF7FU & USB_CHEP_REG_MASK); \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX)); \ + } while(0) /* USB_CLEAR_TX_CHEP_CTR */ + + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_RX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wEPVal; \ + \ + _wEPVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wEPVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_DTOG_RX)); \ + } while(0) /* USB_DRD_RX_DTOG */ + +#define USB_DRD_TX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wEPVal; \ + \ + _wEPVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wEPVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_DTOG_TX)); \ + } while(0) /* USB_TX_DTOG */ + + +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_RX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)); \ + \ + if ((_wRegVal & USB_CHEP_DTOG_RX) != 0U) \ + { \ + USB_DRD_RX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) /* USB_DRD_CLEAR_RX_DTOG */ + +#define USB_DRD_CLEAR_TX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)); \ + \ + if ((_wRegVal & USB_CHEP_DTOG_TX) != 0U) \ + { \ + USB_DRD_TX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) /* USB_DRD_CLEAR_TX_DTOG */ + + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define USB_DRD_SET_CHEP_ADDRESS(USBx, bEpChNum, bAddr) \ + do { \ + uint32_t _wRegVal; \ + \ + /*Read the USB->CHEPx into _wRegVal, Reset(DTOGRX/STRX/DTOGTX/STTX) and set the EpAddress*/ \ + _wRegVal = (USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK) | (bAddr); \ + \ + /*Set _wRegVal in USB->CHEPx and set Transmit/Receive Valid Transfer (x=bEpChNum)*/ \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_ADDRESS */ + + +/* PMA API Buffer Descriptor Management ------------------------------------------------------------*/ +/* Buffer Descriptor Table TXBD0/RXBD0 --- > TXBD7/RXBD7 8 possible descriptor +* The buffer descriptor is located inside the packet buffer memory (USB_PMA_BUFF) +* TXBD [Reserve |Countx| Address_Tx] +* RXBD [BLSIEZ|NUM_Block |CounRx| Address_Rx] */ + +/* Set TX Buffer Descriptor Address Field */ +#define USB_DRD_SET_CHEP_TX_ADDRESS(USBx, bEpChNum, wAddr) \ + do { \ + /* Reset old Address */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD &= USB_PMA_TXBD_ADDMSK; \ + \ + /* Bit0 & Bit1 should be =0 PMA must be Word aligned */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD |= (uint32_t)(((uint32_t)(wAddr) >> 2U) << 2U); \ + } while(0) /* USB_DRD_SET_CHEP_TX_ADDRESS */ + +/* Set RX Buffer Descriptor Address Field */ +#define USB_DRD_SET_CHEP_RX_ADDRESS(USBx, bEpChNum, wAddr) \ + do { \ + /* Reset old Address */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD &= USB_PMA_RXBD_ADDMSK; \ + \ + /* Bit0 & Bit1 should be =0 PMA must be Word aligned */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD |= (uint32_t)(((uint32_t)(wAddr) >> 2U) << 2U); \ + } while(0) /* USB_SET_CHEP_RX_ADDRESS */ + + +/** + * @brief Sets counter of rx buffer with no. of blocks. + * @param pdwReg Register pointer + * @param wCount Counter. + * @param wNBlocks no. of Blocks. + * @retval None + */ +#define USB_DRD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ + do { \ + /* Divide PacketSize by 32 to calculate the Nb of Block32 */ \ + (wNBlocks) =((uint32_t)(wCount) >> 5U); \ + if (((uint32_t)(wCount) % 32U) == 0U) \ + { \ + (wNBlocks)--; \ + } \ + \ + (pdwReg)|= (uint32_t)((((wNBlocks) << 26U)) | USB_CNTRX_BLSIZE); \ + } while(0) /* USB_DRD_CALC_BLK32 */ + +#define USB_DRD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ + do { \ + /* Divide PacketSize by 32 to calculate the Nb of Block32 */ \ + (wNBlocks) = (uint32_t)((uint32_t)(wCount) >> 1U); \ + if (((wCount) & 0x1U) != 0U) \ + { \ + (wNBlocks)++; \ + } \ + (pdwReg) |= (uint32_t)((wNBlocks) << 26U); \ + } while(0) /* USB_DRD_CALC_BLK2 */ + +#define USB_DRD_SET_CHEP_CNT_RX_REG(pdwReg, wCount) \ + do { \ + uint32_t wNBlocks; \ + \ + (pdwReg) &= USB_PMA_RXBD_COUNTMSK; \ + if ((wCount) == 0U) \ + { \ + (pdwReg) &= (uint32_t)~USB_CNTRX_NBLK_MSK; \ + (pdwReg) |= USB_CNTRX_BLSIZE; \ + } \ + else if((wCount) <= 62U) \ + { \ + USB_DRD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ + } \ + else \ + { \ + USB_DRD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ + } \ + } while(0) /* USB_DRD_SET_CHEP_CNT_RX_REG */ + + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define USB_DRD_SET_CHEP_TX_CNT(USBx,bEpChNum, wCount) \ + do { \ + /* Reset old TX_Count value */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD &= USB_PMA_TXBD_COUNTMSK; \ + \ + /* Set the wCount in the dedicated EP_TXBuffer */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD |= (uint32_t)((uint32_t)(wCount) << 16U); \ + } while(0) + + +#define USB_DRD_SET_CHEP_RX_DBUF0_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->TXBD), (wCount)) +#define USB_DRD_SET_CHEP_RX_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->RXBD), (wCount)) + + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval Counter value + */ +#define USB_DRD_GET_CHEP_TX_CNT(USBx, bEpChNum) (((USB_DRD_PMA_BUFF + (bEpChNum))->TXBD & 0x03FF0000U) >>16U) +#define USB_DRD_GET_CHEP_RX_CNT(USBx, bEpChNum) (((USB_DRD_PMA_BUFF + (bEpChNum))->RXBD & 0x03FF0000U) >>16U) + +#define USB_DRD_GET_EP_TX_CNT USB_GET_CHEP_TX_CNT +#define USB_DRD_GET_CH_TX_CNT USB_GET_CHEP_TX_CNT + +#define USB_DRD_GET_EP_RX_CNT USB_DRD_GET_CHEP_RX_CNT +#define USB_DRD_GET_CH_RX_CNT USB_DRD_GET_CHEP_RX_CNT +/** + * @brief Sets buffer 0/1 address in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wBuf0Addr buffer 0 address. + * @retval Counter value + */ +#define USB_DRD_SET_CHEP_DBUF0_ADDR(USBx, bEpChNum, wBuf0Addr) USB_DRD_SET_CHEP_TX_ADDRESS((USBx), (bEpChNum), (wBuf0Addr)) +#define USB_DRD_SET_CHEP_DBUF1_ADDR(USBx, bEpChNum, wBuf1Addr) USB_DRD_SET_CHEP_RX_ADDRESS((USBx), (bEpChNum), (wBuf1Addr)) + + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define USB_DRD_SET_CHEP_DBUF_ADDR(USBx, bEpChNum, wBuf0Addr, wBuf1Addr) \ + do { \ + USB_DRD_SET_CHEP_DBUF0_ADDR((USBx), (bEpChNum), (wBuf0Addr)); \ + USB_DRD_SET_CHEP_DBUF1_ADDR((USBx), (bEpChNum), (wBuf1Addr)); \ + } while(0) /* USB_DRD_SET_CHEP_DBUF_ADDR */ + + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define USB_DRD_SET_CHEP_DBUF0_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + USB_DRD_SET_CHEP_RX_DBUF0_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + USB_DRD_SET_CHEP_TX_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + } \ + } while(0) /* USB_DRD_SET_CHEP_DBUF0_CNT */ + +#define USB_DRD_SET_CHEP_DBUF1_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + USB_DRD_SET_CHEP_RX_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD &= USB_PMA_TXBD_COUNTMSK; \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD |= (uint32_t)((uint32_t)(wCount) << 16U); \ + } \ + } \ + } while(0) /* USB_DRD_SET_CHEP_DBUF1_CNT */ + +#define USB_DRD_SET_CHEP_DBUF_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + USB_DRD_SET_CHEP_DBUF0_CNT((USBx), (bEpChNum), (bDir), (wCount)); \ + USB_DRD_SET_CHEP_DBUF1_CNT((USBx), (bEpChNum), (bDir), (wCount)); \ + } while(0) /* USB_DRD_SET_EPCH_DBUF_CNT */ + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_GET_CHEP_DBUF0_CNT(USBx, bEpChNum) (USB_DRD_GET_CHEP_TX_CNT((USBx), (bEpChNum))) +#define USB_DRD_GET_CHEP_DBUF1_CNT(USBx, bEpChNum) (USB_DRD_GET_CHEP_RX_CNT((USBx), (bEpChNum))) +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + + +HAL_StatusTypeDef USB_CoreInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_SetCurrentMode(USB_DRD_TypeDef *USBx, USB_DRD_ModeTypeDef mode); + +#if defined (HAL_PCD_MODULE_ENABLED) +HAL_StatusTypeDef USB_ActivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPSetStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +#endif + +HAL_StatusTypeDef USB_SetDevAddress(USB_DRD_TypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_DRD_TypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_DRD_TypeDef *USBx); + +HAL_StatusTypeDef USB_ResetPort(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_HostInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_HC_IN_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch); +HAL_StatusTypeDef USB_HC_OUT_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch); +HAL_StatusTypeDef USB_HC_StartXfer(USB_DRD_TypeDef *USBx, USB_DRD_HCTypeDef *hc); + +uint32_t USB_GetHostSpeed(USB_DRD_TypeDef *USBx); +uint32_t USB_GetCurrentFrame(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_StopHost(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_HC_DoubleBuffer(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, uint8_t db_state); +HAL_StatusTypeDef USB_HC_Init(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, uint8_t epnum, + uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps); + +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_DRD_TypeDef *USBx); + +void USB_WritePMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +void USB_ReadPMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_LL_USB_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c new file mode 100644 index 0000000..af4c01d --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c @@ -0,0 +1,759 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief STM32G0xx HAL Driver version number + */ +#define __STM32G0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32G0xx_HAL_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */ +#define __STM32G0xx_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32G0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32G0xx_HAL_VERSION ((__STM32G0xx_HAL_VERSION_MAIN << 24U)\ + |(__STM32G0xx_HAL_VERSION_SUB1 << 16U)\ + |(__STM32G0xx_HAL_VERSION_SUB2 << 8U )\ + |(__STM32G0xx_HAL_VERSION_RC)) + +#if defined(VREFBUF) +#define VREFBUF_TIMEOUT_VALUE 10U /*!< 10 ms */ +#endif /* VREFBUF */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Exported variables ---------------------------------------------------------*/ +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @brief HAL Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### HAL Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief Configure the Flash prefetch and the Instruction cache, + * the time base source, NVIC and any required global low level hardware + * by calling the HAL_MspInit() callback function to be optionally defined in user file + * stm32g0xx_hal_msp.c. + * + * @note HAL_Init() function is called at the beginning of program after reset and before + * the clock configuration. + * + * @note In the default implementation the System Timer (Systick) is used as source of time base. + * The Systick configuration is based on HSI clock, as HSI is the clock + * used after a system Reset. + * Once done, time base tick starts incrementing: the tick variable counter is incremented + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Configure Flash prefetch, Instruction cache */ + /* Default configuration at reset is: */ + /* - Prefetch disabled */ + /* - Instruction cache enabled */ + +#if (INSTRUCTION_CACHE_ENABLE == 0U) + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); +#endif /* INSTRUCTION_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0U) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); + + __HAL_RCC_IOP_FORCE_RESET(); + __HAL_RCC_IOP_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U /(uint32_t)uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32G0xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return ((DBG->IDCODE & DBG_IDCODE_REV_ID) >> 16U); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return ((DBG->IDCODE) & DBG_IDCODE_DEV_ID); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return (READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @brief SYSCFG configuration functions + * +@verbatim + =============================================================================== + ##### HAL SYSCFG configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Pin remap + (+) Configure the Voltage reference buffer + (+) Enable/Disable the Voltage reference buffer + (+) Enable/Disable the I/O analog switch voltage booster + (+) Enable/Disable dead battery behavior(*) + (+) Configure Clamping Diode on specific pins(*) + (*) Feature not available on all devices + +@endverbatim + * @{ + */ +#if defined(VREFBUF) +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg @ref SYSCFG_VREFBUF_VoltageScale + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg @ref SYSCFG_VREFBUF_HighImpedance + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @note VrefBuf voltage scale is calibrated in production for each device, + * using voltage scale 1. This calibration value is loaded + * as default trimming value at device power up. + * This trimming value can be fine tuned for voltage scales 0 and 1 + * using this function. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while (READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0x00U) + { + if ((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} +#endif /* VREFBUF */ + +/** + * @brief Enable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Enable the remap on PA11_PA12 + * @param PinRemap specifies which pins have to be remapped + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + SET_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Disable the remap on PA11_PA12 + * @param PinRemap specifies which pins will behave normally + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + CLEAR_BIT(SYSCFG->CFGR1, PinRemap); +} + +#if defined(SYSCFG_CDEN_SUPPORT) +/** + * @brief Enable Clamping Diode on specified IO + * @param PinConfig specifies on which pins clamping Diode has to be enabled + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_ClampingDiode + * @retval None + */ +void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig)); + SET_BIT(SYSCFG->CFGR2, PinConfig); +} + +/** + * @brief Disable Clamping Diode on specified IO + * @param PinConfig specifies on which pins clamping Diode has to be disabled + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_ClampingDiode + * @retval None + */ +void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig)); + CLEAR_BIT(SYSCFG->CFGR2, PinConfig); +} +#endif /* SYSCFG_CDEN_SUPPORT */ + +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +/** + * @brief Strobe configuration of GPIO depending on UCPDx dead battery settings + * @param ConfigDeadBattery specifies on which pins to make effective or not Dead Battery sw configuration + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_UCPD1_STROBE + * @arg @ref SYSCFG_UCPD2_STROBE + * @retval None + */ +void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery) +{ + assert_param(IS_SYSCFG_DBATT_CONFIG(ConfigDeadBattery)); + + /* Change strobe configuration of GPIO depending on UCPDx dead battery settings */ + MODIFY_REG(SYSCFG->CFGR1, (SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE), ConfigDeadBattery); +} +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c new file mode 100644 index 0000000..eac23b0 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c @@ -0,0 +1,3006 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Initialization and de-initialization functions + * ++ Initialization and Configuration of ADC + * + Operation functions + * ++ Start, stop, get result of conversions of regular + * group, using 3 possible modes: polling, interruption or DMA. + * + Control functions + * ++ Channels configuration on regular group + * ++ Analog Watchdog configuration + * + State functions + * ++ ADC state machine management + * ++ Interrupts and flags management + * Other functions (extended functions) are available in file + * "stm32g0xx_hal_adc_ex.c". + * + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution. + + (+) Interrupt generation at the end of regular conversion and in case of + analog watchdog or overrun events. + + (+) Single and continuous conversion modes. + + (+) Scan mode for conversion of several channels sequentially. + + (+) Data alignment with in-built data coherency. + + (+) Programmable sampling time (common to group of channels) + + (+) External trigger (timer or EXTI) with configurable polarity + + (+) DMA request generation for transfer of conversions data of regular group. + + (+) ADC calibration + + (+) ADC conversion of regular group. + + (+) ADC supply requirements: 1.62 V to 3.6 V. + + (+) ADC input range: from Vref- (connected to Vssa) to Vref+ (connected to + Vdda or to an external voltage reference). + + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + Caution: On STM32G0, ADC clock frequency max is 35MHz (refer + to device datasheet). + Therefore, ADC clock source from RCC and ADC clock + prescaler must be configured to remain below + this maximum frequency. + + (++) Two clock settings are mandatory: + (+++) ADC clock (core clock, also possibly conversion clock). + + (+++) ADC clock (conversions clock). + Four possible clock sources: synchronous clock from APB clock (same as ADC core clock) + or asynchronous clock from RCC level: SYSCLK, HSI16, PLLPCLK. + + (+++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) __HAL_RCC_ADC_CLK_ENABLE(); (mandatory: core clock) + + (++) ADC clock source and clock prescaler are configured at ADC level with + parameter "ClockPrescaler" using function HAL_ADC_Init(). + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADCx_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, group regular, channels parameters *** + ================================================================ + [..] + + (#) Configure the ADC parameters (resolution, data alignment, ...) + and regular group parameters (conversion trigger, sequencer, ...) + using function HAL_ADC_Init(). + + (#) Configure the channels for regular group parameters (channel number, + channel rank into sequencer, ..., into regular group) + using function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AnalogWDGConfig(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) Optionally, perform an automatic ADC calibration to improve the + conversion accuracy + using function HAL_ADCEx_Calibration_Start(). + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) HAL_ADC_LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __ADCx_FORCE_RESET(), __ADCx_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location) or with + other device clock parameters configuration: + (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI14; + (+++) RCC_OscInitStructure.HSI14State = RCC_HSI14_OFF; (if not used for system clock) + (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_Init(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_ADC_RegisterCallback() + to register an interrupt callback. + [..] + + Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + [..] + + By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit() + or @ref HAL_ADC_Init() function. + [..] + + When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Fixed timeout values for ADC calibration, enable settling time, disable */ +/* settling time. */ +/* Values defined to be higher than worst cases: low clock frequency, */ +/* maximum prescaler. */ +/* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */ +/* prescaler 4, sampling time 7.5 ADC clock cycles, resolution 12 bits. */ +/* Unit: ms */ +#define ADC_ENABLE_TIMEOUT (2UL) +#define ADC_DISABLE_TIMEOUT (2UL) +#define ADC_STOP_CONVERSION_TIMEOUT (2UL) +#define ADC_CHANNEL_CONF_RDY_TIMEOUT (1UL) + +/* Register CHSELR bits corresponding to ranks 2 to 8 . */ +#define ADC_CHSELR_SQ2_TO_SQ8 (ADC_CHSELR_SQ2 | ADC_CHSELR_SQ3 | ADC_CHSELR_SQ4 | \ + ADC_CHSELR_SQ5 | ADC_CHSELR_SQ6 | ADC_CHSELR_SQ7 | ADC_CHSELR_SQ8) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief ADC Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the ADC peripheral and regular group according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (refer to description of RCC configuration for ADC + * in header of this file). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @note This function configures the ADC within 2 scopes: scope of entire + * ADC and scope of regular group. For parameters details, see comments + * of structure "ADC_InitTypeDef". + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmpCFGR1 = 0UL; + uint32_t tmpCFGR2 = 0UL; + uint32_t tmp_adc_reg_is_conversion_on_going; + __IO uint32_t wait_loop_index = 0UL; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler)); + assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution)); + assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); + assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); + assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoPowerOff)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon1)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon2)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode)); + + assert_param(IS_ADC_TRIGGER_FREQ(hadc->Init.TriggerFrequencyMode)); + + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + + if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + } + } + + /* ADC group regular discontinuous mode can be enabled only if */ + /* continuous mode is disabled. */ + assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (hadc->Init.ContinuousConvMode == ENABLE))); + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + /* Init the ADC Callback settings */ + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ + hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; /* Legacy weak callback */ + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; /* Legacy weak callback */ + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; /* Legacy weak callback */ + + if (hadc->MspInitCallback == NULL) + { + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hadc->MspInitCallback(hadc); +#else + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Initialize Lock */ + hadc->Lock = HAL_UNLOCKED; + } + + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Enable ADC internal voltage regulator */ + LL_ADC_EnableInternalRegulator(hadc->Instance); + + /* Delay for ADC stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* Verification that ADC voltage regulator is correctly enabled, whether */ + /* or not ADC is coming from state reset (if any potential problem of */ + /* clocking, voltage regulator would not be enabled). */ + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed and if there is no conversion on going on regular */ + /* group (ADC may already be enabled at this point if HAL_ADC_Init() is */ + /* called to update a parameter on the fly). */ + tmp_adc_reg_is_conversion_on_going = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + && (tmp_adc_reg_is_conversion_on_going == 0UL) + ) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Configuration of common ADC parameters */ + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Internal voltage regulator (no parameter in HAL ADC init structure) */ + /* - Clock configuration */ + /* - ADC resolution */ + /* - Oversampling */ + /* - Trigger frequency mode */ + /* Note: If low power mode AutoPowerOff is enabled, ADC enable */ + /* and disable phases are performed automatically by hardware */ + /* (in this case, flag ADC_FLAG_RDY is not set). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Some parameters of this register are not reset, since they are set */ + /* by other functions and must be kept in case of usage of this */ + /* function on the fly (update of a parameter of ADC_InitTypeDef */ + /* without needing to reconfigure all other ADC groups/channels */ + /* parameters): */ + /* - internal measurement paths: Vbat, temperature sensor, Vref */ + /* (set into HAL_ADC_ConfigChannel() ) */ + + /* Configuration of ADC resolution */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_RES, + hadc->Init.Resolution); + + tmpCFGR2 |= ((hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) | + hadc->Init.Oversampling.Ratio | + hadc->Init.Oversampling.RightBitShift | + hadc->Init.Oversampling.TriggeredMode | + hadc->Init.TriggerFrequencyMode + ); + + if (hadc->Init.OversamplingMode == ENABLE) + { + SET_BIT(tmpCFGR2, ADC_CFGR2_OVSE); + } + + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_CKMODE | + ADC_CFGR2_LFTRIG | + ADC_CFGR2_OVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS | + ADC_CFGR2_TOVS, + tmpCFGR2); + + /* Configuration of ADC clock mode: asynchronous clock source */ + /* with selectable prescaler. */ + if (((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV1) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV2) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV4)) + { + MODIFY_REG(ADC1_COMMON->CCR, + ADC_CCR_PRESC, + hadc->Init.ClockPrescaler & ADC_CCR_PRESC); + } + } + + /* Configuration of ADC: */ + /* - discontinuous mode */ + /* - LowPowerAutoWait mode */ + /* - LowPowerAutoPowerOff mode */ + /* - continuous conversion mode */ + /* - overrun */ + /* - external trigger to start conversion */ + /* - external trigger polarity */ + /* - data alignment */ + /* - resolution */ + /* - scan direction */ + /* - DMA continuous request */ + tmpCFGR1 |= (ADC_CFGR1_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | + ADC_CFGR1_AUTOOFF((uint32_t)hadc->Init.LowPowerAutoPowerOff) | + ADC_CFGR1_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | + ADC_CFGR1_OVERRUN(hadc->Init.Overrun) | + hadc->Init.DataAlign | + ADC_SCAN_SEQ_MODE(hadc->Init.ScanConvMode) | + ADC_CFGR1_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests)); + + /* Update setting of discontinuous mode only if continuous mode is disabled */ + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + if (hadc->Init.ContinuousConvMode == DISABLE) + { + /* Enable the selected ADC group regular discontinuous mode */ + tmpCFGR1 |= ADC_CFGR1_DISCEN; + } + else + { + /* ADC regular group discontinuous was intended to be enabled, */ + /* but ADC regular group modes continuous and sequencer discontinuous */ + /* cannot be enabled simultaneously. */ + + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + tmpCFGR1 |= ((hadc->Init.ExternalTrigConv & ADC_CFGR1_EXTSEL) | + hadc->Init.ExternalTrigConvEdge); + } + + /* Update ADC configuration register with previous settings */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | + ADC_CFGR1_WAIT | + ADC_CFGR1_CONT | + ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTSEL | + ADC_CFGR1_EXTEN | + ADC_CFGR1_ALIGN | + ADC_CFGR1_SCANDIR | + ADC_CFGR1_DMACFG, + tmpCFGR1); + + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_LFTRIG | + ADC_CFGR2_OVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS | + ADC_CFGR2_TOVS, + tmpCFGR2); + + /* Channel sampling time configuration */ + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_1, hadc->Init.SamplingTimeCommon1); + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_2, hadc->Init.SamplingTimeCommon2); + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is not present by hardware on this device, but */ + /* emulated by software for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion". */ + /* Channels must be configured into each rank using function */ + /* "HAL_ADC_ConfigChannel()". */ + if (hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) + { + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + /* Count number of ranks available in HAL ADC handle variable */ + uint32_t ADCGroupRegularSequencerRanksCount; + + /* Parse all ranks from 1 to 8 */ + for (ADCGroupRegularSequencerRanksCount = 0UL; ADCGroupRegularSequencerRanksCount < (8UL); ADCGroupRegularSequencerRanksCount++) + { + /* Check each sequencer rank until value of end of sequence */ + if (((hadc->ADCGroupRegularSequencerRanks >> (ADCGroupRegularSequencerRanksCount * 4UL)) & ADC_CHSELR_SQ1) == + ADC_CHSELR_SQ1) + { + break; + } + } + + if (ADCGroupRegularSequencerRanksCount == 1UL) + { + /* Set ADC group regular sequencer: */ + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else + { + /* Set ADC group regular sequencer: */ + /* - Set ADC group regular sequencer to value memorized */ + /* in HAL ADC handle */ + /* Note: This value maybe be initialized at a unknown value, */ + /* therefore after the first call of "HAL_ADC_Init()", */ + /* each rank corresponding to parameter "NbrOfConversion" */ + /* must be set using "HAL_ADC_ConfigChannel()". */ + /* - Set sequencer scan length by clearing ranks above maximum rank */ + /* and do not modify other ranks value. */ + MODIFY_REG(hadc->Instance->CHSELR, + ADC_CHSELR_SQ_ALL, + (ADC_CHSELR_SQ2_TO_SQ8 << (((hadc->Init.NbrOfConversion - 1UL) * ADC_REGULAR_RANK_2) & 0x1FUL)) | (hadc->ADCGroupRegularSequencerRanks) + ); + } + } + + /* Check back that ADC registers have effectively been configured to */ + /* ensure of no potential problem of ADC core peripheral clocking. */ + /* Check through register CFGR1 (excluding analog watchdog configuration: */ + /* set into separate dedicated function, and bits of ADC resolution set */ + /* out of temporary variable 'tmpCFGR1'). */ + if ((hadc->Instance->CFGR1 & ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_RES)) + == tmpCFGR1) + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to their default reset + * values, with deinitialization of the ADC MSP. + * @note For devices with several ADCs: reset of ADC common registers is done + * only if all ADCs sharing the same common group are disabled. + * (function "HAL_ADC_MspDeInit()" is also called under the same conditions: + * all ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * If this is not the case, reset of these common parameters reset is + * bypassed without error reporting: it can be the intended behavior in + * case of reset of a single ADC while the other ADCs sharing the same + * common group is still running. + * @note By default, HAL_ADC_DeInit() set ADC in mode deep power-down: + * this saves more power by reducing leakage currents + * and is particularly interesting before entering MCU low-power modes. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going, on regular group */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Change ADC state */ + hadc->State = HAL_ADC_STATE_READY; + } + + /* Disable ADC internal voltage regulator */ + LL_ADC_DisableInternalRegulator(hadc->Instance); + } + + /* Note: HAL ADC deInit is done independently of ADC conversion stop */ + /* and disable return status. In case of status fail, attempt to */ + /* perform deinitialization anyway and it is up user code in */ + /* in HAL_ADC_MspDeInit() to reset the ADC peripheral using */ + /* system RCC hard reset. */ + + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD3 | ADC_IT_AWD2 | + ADC_IT_AWD1 | ADC_IT_OVR | + ADC_IT_EOS | ADC_IT_EOC | + ADC_IT_EOSMP | ADC_IT_RDY)); + + /* Reset register ISR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | + ADC_FLAG_AWD1 | ADC_FLAG_OVR | + ADC_FLAG_EOS | ADC_FLAG_EOC | + ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + + /* Reset register CFGR1 */ + hadc->Instance->CFGR1 &= ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES | + ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + hadc->Instance->CFGR2 &= ~ADC_CFGR2_CKMODE; + + /* Reset register SMPR */ + hadc->Instance->SMPR &= ~ADC_SMPR_SMP1; + + /* Reset register TR1 */ + hadc->Instance->TR1 &= ~(ADC_TR1_HT1 | ADC_TR1_LT1); + + /* Reset register CHSELR */ + hadc->Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CCR */ + ADC1_COMMON->CCR &= ~(ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN | ADC_CCR_PRESC); + + /* ========== Hard reset ADC peripheral ========== */ + /* Performs a global reset of the entire ADC peripheral: ADC state is */ + /* forced to a similar state after device power-on. */ + /* If needed, copy-paste and uncomment the following reset code into */ + /* function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */ + /* */ + /* __HAL_RCC_ADC1_FORCE_RESET() */ + /* __HAL_RCC_ADC1_RELEASE_RESET() */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + if (hadc->MspDeInitCallback == NULL) + { + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hadc->MspDeInitCallback(hadc); +#else + /* DeInit the low level hardware */ + HAL_ADC_MspDeInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Reset HAL ADC handle variable */ + hadc->ADCGroupRegularSequencerRanks = 0x00000000UL; + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Initialize the ADC MSP. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitialize the ADC MSP. + * @param hadc ADC handle + * @note All ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ADC Callback + * To be used instead of the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = pCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = pCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = pCallback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = pCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a ADC Callback + * ADC callback is redirected to the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hadc->State & HAL_ADC_STATE_READY) != 0) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = HAL_ADC_ErrorCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions + * @brief ADC IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular group. + (+) Stop conversion of regular group. + (+) Poll for conversion complete on regular group. + (+) Poll for conversion event. + (+) Get result of regular channel conversion. + (+) Start conversion of regular group and enable interruptions. + (+) Stop conversion of regular group and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion of regular group and enable DMA transfer. + (+) Stop conversion of regular group and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enable ADC, start conversion of regular group. + * @note Interruptions enabled in this function: None. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for regular group conversion to be completed. + * @note ADC conversion flags EOS (end of sequence) and EOC (end of + * conversion) are cleared by this function, with an exception: + * if low power feature "LowPowerAutoWait" is enabled, flags are + * not cleared to not interfere with this feature until data register + * is read using function HAL_ADC_GetValue(). + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode and polling for end of each conversion (ADC init + * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV). + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. Nevertheless, polling can still + * be performed on the complete sequence (ADC init + * parameter "EOCSelection" set to ADC_EOC_SEQ_CONV). + * @param hadc ADC handle + * @param Timeout Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t tmp_Flag_End; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* If end of conversion selected to end of sequence conversions */ + if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV) + { + tmp_Flag_End = ADC_FLAG_EOS; + } + /* If end of conversion selected to end of unitary conversion */ + else /* ADC_EOC_SINGLE_CONV */ + { + /* Verification that ADC configuration is compliant with polling for */ + /* each conversion: */ + /* Particular case is ADC configured in DMA mode and ADC sequencer with */ + /* several ranks and polling for end of each conversion. */ + /* For code simplicity sake, this particular case is generalized to */ + /* ADC configured in DMA mode and and polling for end of each conversion. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + return HAL_ERROR; + } + else + { + tmp_Flag_End = (ADC_FLAG_EOC); + } + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait until End of unitary conversion or sequence conversions flag is raised */ + while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* Check whether end of sequence is reached */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Clear end of conversion flag of regular group if low power feature */ + /* "LowPowerAutoWait " is disabled, to not interfere with this feature */ + /* until data register is read using function HAL_ADC_GetValue(). */ + if (hadc->Init.LowPowerAutoWait == DISABLE) + { + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Poll for ADC event. + * @param hadc ADC handle + * @param EventType the ADC event type. + * This parameter can be one of the following values: + * @arg @ref ADC_EOSMP_EVENT ADC End of Sampling event + * @arg @ref ADC_AWD1_EVENT ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 devices) + * @arg @ref ADC_AWD2_EVENT ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 families) + * @arg @ref ADC_AWD3_EVENT ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 families) + * @arg @ref ADC_OVR_EVENT ADC Overrun event + * @param Timeout Timeout value in millisecond. + * @note The relevant flag is cleared if found to be set, except for ADC_FLAG_OVR. + * Indeed, the latter is reset only if hadc->Init.Overrun field is set + * to ADC_OVR_DATA_OVERWRITTEN. Otherwise, data register may be potentially overwritten + * by a new converted data as soon as OVR is cleared. + * To reset OVR flag once the preserved data is retrieved, the user can resort + * to macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + switch (EventType) + { + /* End Of Sampling event */ + case ADC_EOSMP_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + + /* Clear the End Of Sampling flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + + break; + + /* Analog watchdog (level out of window) event */ + /* Note: In case of several analog watchdog enabled, if needed to know */ + /* which one triggered and on which ADCx, test ADC state of analog watchdog */ + /* flags HAL_ADC_STATE_AWD1/2/3 using function "HAL_ADC_GetState()". */ + /* For example: */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD2) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD3) != 0UL) " */ + + /* Check analog watchdog 1 flag */ + case ADC_AWD_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + + break; + + /* Check analog watchdog 2 flag */ + case ADC_AWD2_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + + break; + + /* Check analog watchdog 3 flag */ + case ADC_AWD3_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + + break; + + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* If overrun is set to overwrite previous data, overrun event is not */ + /* considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + } + else + { + /* Clear ADC Overrun flag only if Overrun is set to ADC_OVR_DATA_OVERWRITTEN + otherwise, data register is potentially overwritten by new converted data as soon + as OVR is cleared. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable ADC, start conversion of regular group with interruption. + * @note Interruptions enabled in this function according to initialization + * setting : EOC (end of conversion), EOS (end of sequence), + * OVR overrun. + * Each of these interruptions has its dedicated callback function. + * @note To guarantee a proper reset of all interruptions once all the needed + * conversions are obtained, HAL_ADC_Stop_IT() must be called to ensure + * a correct stop of the IT-based conversions. + * @note By default, HAL_ADC_Start_IT() does not enable the End Of Sampling + * interruption. If required (e.g. in case of oversampling with trigger + * mode), the user must: + * 1. first clear the EOSMP flag if set with macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP) + * 2. then enable the EOSMP interrupt with macro __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOSMP) + * before calling HAL_ADC_Start_IT(). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Disable all interruptions before enabling the desired ones */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* Enable ADC end of conversion interrupt */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC); + break; + } + + /* Enable ADC overrun interrupt */ + /* If hadc->Init.Overrun is set to ADC_OVR_DATA_PRESERVED, only then is + ADC_IT_OVR enabled; otherwise data overwrite is considered as normal + behavior and no CPU time is lost for a non-processed interruption */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + } + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for regular group */ + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enable ADC, start conversion of regular group and transfer result through DMA. + * @note Interruptions enabled in this function: + * overrun (if applicable), DMA half transfer, DMA transfer complete. + * Each of these interruptions has its dedicated callback function. + * @param hadc ADC handle + * @param pData Destination Buffer address. + * @param Length Number of data to be transferred from ADC peripheral to memory + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Specific case for first call occurrence of this function (DMA transfer */ + /* not activated and ADC disabled), DMA transfer must be activated */ + /* with ADC disabled. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) == 0UL) + { + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + /* Disable ADC */ + LL_ADC_Disable(hadc->Instance); + } + + /* Enable ADC DMA mode */ + hadc->Instance->CFGR1 |= ADC_CFGR1_DMAEN; + } + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC */ + /* operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable ADC overrun interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + + /* Start the DMA channel */ + tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential ADC group regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + { + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripheral */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, */ + /* to keep in memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Disable(hadc); + } + else + { + (void)ADC_Disable(hadc); + } + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + + /* Disable ADC DMA (ADC DMA configuration of continuous requests is kept) */ + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC regular group conversion result. + * @note Reading register DR automatically clears ADC flag EOC + * (ADC group regular end of unitary conversion). + * @note This function does not clear ADC flag EOS + * (ADC group regular end of sequence conversion). + * Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_EOS). + * @param hadc ADC handle + * @retval ADC group regular conversion data + */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* Return ADC converted value */ + return hadc->Instance->DR; +} + +/** + * @brief Handle ADC interrupt request. + * @param hadc ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) +{ + uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ + uint32_t tmp_isr = hadc->Instance->ISR; + uint32_t tmp_ier = hadc->Instance->IER; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + + /* ========== Check End of Sampling flag for ADC group regular ========== */ + if (((tmp_isr & ADC_FLAG_EOSMP) == ADC_FLAG_EOSMP) && ((tmp_ier & ADC_IT_EOSMP) == ADC_IT_EOSMP)) + { + /* Update state machine on end of sampling status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + } + + /* End Of Sampling callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->EndOfSamplingCallback(hadc); +#else + HAL_ADCEx_EndOfSamplingCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + } + + /* ====== Check ADC group regular end of unitary conversion sequence conversions ===== */ + if ((((tmp_isr & ADC_FLAG_EOC) == ADC_FLAG_EOC) && ((tmp_ier & ADC_IT_EOC) == ADC_IT_EOC)) || + (((tmp_isr & ADC_FLAG_EOS) == ADC_FLAG_EOS) && ((tmp_ier & ADC_IT_EOS) == ADC_IT_EOS))) + { + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + } + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ + /* Note: Into callback function "HAL_ADC_ConvCpltCallback()", */ + /* to determine if conversion has been triggered from EOC or EOS, */ + /* possibility to use: */ + /* " if ( __HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_EOS)) " */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + /* Note: in case of overrun set to ADC_OVR_DATA_PRESERVED, end of */ + /* conversion flags clear induces the release of the preserved data.*/ + /* Therefore, if the preserved data value is needed, it must be */ + /* read preliminarily into HAL_ADC_ConvCpltCallback(). */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* ========== Check Analog watchdog 1 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD1) == ADC_FLAG_AWD1) && ((tmp_ier & ADC_IT_AWD1) == ADC_IT_AWD1)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window 1 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindowCallback(hadc); +#else + HAL_ADC_LevelOutOfWindowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + } + + /* ========== Check analog watchdog 2 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD2) == ADC_FLAG_AWD2) && ((tmp_ier & ADC_IT_AWD2) == ADC_IT_AWD2)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Level out of window 2 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow2Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow2Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + } + + /* ========== Check analog watchdog 3 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD3) == ADC_FLAG_AWD3) && ((tmp_ier & ADC_IT_AWD3) == ADC_IT_AWD3)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Level out of window 3 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow3Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow3Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + } + + /* ========== Check Overrun flag ========== */ + if (((tmp_isr & ADC_FLAG_OVR) == ADC_FLAG_OVR) && ((tmp_ier & ADC_IT_OVR) == ADC_IT_OVR)) + { + /* If overrun is set to overwrite previous data (default setting), */ + /* overrun event is not considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + /* Exception for usage with DMA overrun event always considered as an */ + /* error. */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + overrun_error = 1UL; + } + else + { + /* Check DMA configuration */ + if (LL_ADC_REG_GetDMATransfer(hadc->Instance) != LL_ADC_REG_DMA_TRANSFER_NONE) + { + overrun_error = 1UL; + } + } + + if (overrun_error == 1UL) + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Error callback */ + /* Note: In case of overrun, ADC conversion data is preserved until */ + /* flag OVR is reset. */ + /* Therefore, old ADC conversion data can be retrieved in */ + /* function "HAL_ADC_ErrorCallback()". */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + + /* ========== Check channel configuration ready flag ========== */ + if (((tmp_isr & ADC_FLAG_CCRDY) == ADC_FLAG_CCRDY) && ((tmp_ier & ADC_IT_CCRDY) == ADC_IT_CCRDY)) + { + /* Level out of window 1 callback */ + HAL_ADCEx_ChannelConfigReadyCallback(hadc); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_CCRDY); + } +} + +/** + * @brief Conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Conversion DMA half-transfer callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 1 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC error callback in non-blocking mode + * (ADC conversion with interruption or transfer by DMA). + * @note In case of error due to overrun when using ADC with DMA transfer + * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"): + * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". + * - If needed, restart a new ADC conversion using function + * "HAL_ADC_Start_DMA()" + * (this function is also clearing overrun flag) + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on regular group + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configure a channel to be assigned to ADC group regular. + * @note In case of usage of internal measurement channels: + * Vbat/VrefInt/TempSensor. + * These internal paths can be disabled using function + * HAL_ADC_DeInit(). + * @note Possibility to update parameters on the fly: + * This function initializes channel into ADC group regular, + * following calls to this function can be used to reconfigure + * some parameters of structure "ADC_ChannelConfTypeDef" on the fly, + * without resetting the ADC. + * The setting of these parameters is conditioned to ADC state: + * Refer to comments of structure "ADC_ChannelConfTypeDef". + * @param hadc ADC handle + * @param sConfig Structure of ADC channel assigned to ADC group regular. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_config_internal_channel; + __IO uint32_t wait_loop_index = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(sConfig->Channel)); + assert_param(IS_ADC_SAMPLING_TIME_COMMON(sConfig->SamplingTime)); + + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + assert_param(IS_ADC_REGULAR_RANK_SEQ_FIXED(sConfig->Rank)); + } + else + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + + assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Channel number */ + /* - Channel sampling time */ + /* - Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Configure channel: depending on rank setting, add it or remove it from */ + /* ADC sequencer. */ + /* If sequencer set to not fully configurable with channel rank set to */ + /* none, remove the channel from the sequencer. */ + /* Otherwise (sequencer set to fully configurable or to to not fully */ + /* configurable with channel rank to be set), configure the selected */ + /* channel. */ + if (sConfig->Rank != ADC_RANK_NONE) + { + /* Regular sequence configuration */ + /* Note: ADC channel configuration requires few ADC clock cycles */ + /* to be ready. Processing of ADC settings in this function */ + /* induce that a specific wait time is not necessary. */ + /* For more details on ADC channel configuration ready, */ + /* refer to function "LL_ADC_IsActiveFlag_CCRDY()". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Set the channel by enabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChAdd(hadc->Instance, sConfig->Channel); + } + else + { + /* Sequencer set to fully configurable: */ + /* Set the channel by entering it into the selected rank. */ + + /* Memorize the channel set into variable in HAL ADC handle */ + MODIFY_REG(hadc->ADCGroupRegularSequencerRanks, + ADC_CHSELR_SQ1 << (sConfig->Rank & 0x1FUL), + __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel) << (sConfig->Rank & 0x1FUL)); + + /* If the selected rank is below ADC group regular sequencer length, */ + /* apply the configuration in ADC register. */ + /* Note: Otherwise, configuration is not applied. */ + /* To apply it, parameter'NbrOfConversion' must be increased. */ + if (((sConfig->Rank >> 2UL) + 1UL) <= hadc->Init.NbrOfConversion) + { + LL_ADC_REG_SetSequencerRanks(hadc->Instance, sConfig->Rank, sConfig->Channel); + } + } + + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime); + + /* Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + /* internal measurement paths enable: If internal channel selected, */ + /* enable dedicated internal buffers and path. */ + /* Note: these internal measurement paths can be disabled using */ + /* HAL_ADC_DeInit() or removing the channel from sequencer with */ + /* channel configuration parameter "Rank". */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + /* If the requested internal measurement path has already been enabled, */ + /* bypass the configuration processing. */ + if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel); + + /* Delay for temperature sensor stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + else if ((sConfig->Channel == ADC_CHANNEL_VBAT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel); + } + else if ((sConfig->Channel == ADC_CHANNEL_VREFINT) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + else + { + /* Regular sequencer configuration */ + /* Note: Case of sequencer set to fully configurable: */ + /* Sequencer rank cannot be disabled, only affected to */ + /* another channel. */ + /* To remove a rank, use parameter 'NbrOfConversion". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Reset the channel by disabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChRem(hadc->Instance, sConfig->Channel); + } + + /* Management of internal measurement channels: Vbat/VrefInt/TempSensor. */ + /* If internal channel selected, enable dedicated internal buffers and */ + /* paths. */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_TEMPSENSOR & tmp_config_internal_channel); + } + else if (sConfig->Channel == ADC_CHANNEL_VBAT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_VBAT & tmp_config_internal_channel); + } + else if (sConfig->Channel == ADC_CHANNEL_VREFINT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_VREFINT & tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + } + + /* If a conversion is on going on regular group, no update on regular */ + /* channel could be done on neither of the channel configuration structure */ + /* parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Configure the analog watchdog. + * @note Possibility to update parameters on the fly: + * This function initializes the selected analog watchdog, successive + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_AnalogWDGConfTypeDef" on the fly, without resetting + * the ADC. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_AnalogWDGConfTypeDef". + * @note On this STM32 series, analog watchdog thresholds can be modified + * while ADC conversion is on going. + * In this case, some constraints must be taken into account: + * the programmed threshold values are effective from the next + * ADC EOC (end of unitary conversion). + * Considering that registers write delay may happen due to + * bus activity, this might cause an uncertainty on the + * effective timing of the new programmed threshold values. + * @param hadc ADC handle + * @param AnalogWDGConfig Structure of ADC analog watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmpAWDHighThresholdShifted; + uint32_t tmpAWDLowThresholdShifted; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(AnalogWDGConfig->WatchdogNumber)); + assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode)); + assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); + + if (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) + { + assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel)); + } + + /* Verify thresholds range */ + if (hadc->Init.OversamplingMode == ENABLE) + { + /* Case of oversampling enabled: depending on ratio and shift configuration, + analog watchdog thresholds can be higher than ADC resolution. + Verify if thresholds are within maximum thresholds range. */ + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->LowThreshold)); + } + else + { + /* Verify if thresholds are within the selected ADC resolution */ + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on ADC group regular: */ + /* - Analog watchdog channels */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Analog watchdog configuration */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Configuration of analog watchdog: */ + /* - Set the analog watchdog enable mode: one or overall group of */ + /* channels. */ + switch (AnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, + __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR)); + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_DISABLE); + break; + } + + /* Update state, clear previous result related to AWD1 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD1(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD1(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD1(hadc->Instance); + } + } + /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */ + else + { + switch (AnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + /* Update AWD by bitfield to keep the possibility to monitor */ + /* several channels by successive calls of this function. */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + SET_BIT(hadc->Instance->AWD2CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel))); + } + else + { + SET_BIT(hadc->Instance->AWD3CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel))); + } + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE); + break; + } + + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + /* Update state, clear previous result related to AWD2 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD2(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD2(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD2(hadc->Instance); + } + } + /* (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */ + else + { + /* Update state, clear previous result related to AWD3 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD3(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD3(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD3(hadc->Instance); + } + } + } + + } + + /* Analog watchdog thresholds configuration */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmpAWDHighThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->HighThreshold); + tmpAWDLowThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->LowThreshold); + } + /* Case of ADC_ANALOGWATCHDOG_2 and ADC_ANALOGWATCHDOG_3 */ + else + { + /* No need to shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmpAWDHighThresholdShifted = AnalogWDGConfig->HighThreshold; + tmpAWDLowThresholdShifted = AnalogWDGConfig->LowThreshold; + } + + /* Set ADC analog watchdog thresholds value of both thresholds high and low */ + LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, AnalogWDGConfig->WatchdogNumber, tmpAWDHighThresholdShifted, + tmpAWDLowThresholdShifted); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions + * @brief ADC Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral state and errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the ADC handle state. + * @note ADC state machine is managed by bitfields, ADC status must be + * compared with states bits. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + * @param hadc ADC handle + * @retval ADC handle state (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return ADC handle state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code. + * @param hadc ADC handle + * @retval ADC error code (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Stop ADC conversion. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped to disable the ADC. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Verification if ADC is not already stopped on regular group to bypass */ + /* this function if not needed. */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) != 0UL) + { + /* Stop potential conversion on going on regular group */ + /* Software is allowed to set ADSTP only when ADSTART=1 and ADDIS=0 */ + if (LL_ADC_IsDisableOngoing(hadc->Instance) == 0UL) + { + /* Stop ADC group regular conversion */ + LL_ADC_REG_StopConversion(hadc->Instance); + } + + /* Wait for conversion effectively stopped */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADSTART) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + __IO uint32_t wait_loop_index = 0UL; + + /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ + /* enabling phase not yet completed: flag ADC ready not yet set). */ + /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */ + /* causes: ADC clock not running, ...). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Check if conditions to enable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN)) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Enable the ADC peripheral */ + LL_ADC_Enable(hadc->Instance); + + if ((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) & LL_ADC_PATH_INTERNAL_TEMPSENSOR) != 0UL) + { + /* Delay for temperature sensor buffer stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* If low power mode AutoPowerOff is enabled, power-on/off phases are */ + /* performed automatically by hardware and flag ADC ready is not set. */ + if (hadc->Init.LowPowerAutoPowerOff != ENABLE) + { + /* Wait for ADC effectively enabled */ + tickstart = HAL_GetTick(); + + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + { + /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit + has been cleared (after a calibration), ADEN bit is reset by the + calibration logic. + The workaround is to continue setting ADEN until ADRDY is becomes 1. + Additionally, ADC_ENABLE_TIMEOUT is defined to encompass this + 4 ADC clock cycle duration */ + /* Note: Test of ADC enabled required due to hardware constraint to */ + /* not enable ADC if already enabled. */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_Enable(hadc->Instance); + } + + if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Disable the selected ADC. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + const uint32_t tmp_adc_is_disable_on_going = LL_ADC_IsDisableOngoing(hadc->Instance); + + /* Verification if ADC is not already disabled: */ + /* Note: forbidden to disable ADC (set bit ADC_CR_ADDIS) if ADC is already */ + /* disabled. */ + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_disable_on_going == 0UL) + ) + { + /* Check if conditions to disable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) + { + /* Disable the ADC peripheral */ + LL_ADC_Disable(hadc->Instance); + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Wait for ADC effectively disabled */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else /* DMA and-or internal error occurred */ + { + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL) + { + /* Call HAL ADC Error Callback function */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else + { + /* Call ADC DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Half conversion callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvHalfCpltCallback(hadc); +#else + HAL_ADC_ConvHalfCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c new file mode 100644 index 0000000..542c22c --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c @@ -0,0 +1,356 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc_ex.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Operation functions + * ++ Calibration + * +++ ADC automatic self-calibration + * +++ Calibration factors get or set + * Other functions (generic functions) are available in file + * "stm32g0xx_hal_adc.c". + * + @verbatim + [..] + (@) Sections "ADC peripheral features" and "How to use this driver" are + available in file of generic functions "stm32g0xx_hal_adc.c". + [..] + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADCEx ADCEx + * @brief ADC Extended HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Constants ADC Extended Private Constants + * @{ + */ + +/* Fixed timeout value for ADC calibration. */ +/* Values defined to be higher than worst cases: maximum ratio between ADC */ +/* and CPU clock frequencies. */ +/* Example of profile low frequency : ADC frequency at 31.25kHz (ADC clock */ +/* source PLL 8MHz, ADC clock prescaler 256), CPU frequency 52MHz. */ +/* Calibration time max = 116 / fADC (refer to datasheet) */ +/* = 193 024 CPU cycles */ +#define ADC_CALIBRATION_TIMEOUT (193024UL) /*!< ADC calibration time-out value (unit: CPU cycles) */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Functions ADC Extended Exported Functions + * @{ + */ + +/** @defgroup ADCEx_Exported_Functions_Group1 Extended Input and Output operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Perform the ADC self-calibration. + (+) Get calibration factors. + (+) Set calibration factors. + +@endverbatim + * @{ + */ + +/** + * @brief Perform an ADC automatic self-calibration + * Calibration prerequisite: ADC must be disabled (execute this + * function before HAL_ADC_Start() or after HAL_ADC_Stop() ). + * @note Calibration factor can be read after calibration, using function + * HAL_ADC_GetValue() (value on 7 bits: from DR[6;0]). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + __IO uint32_t wait_loop_index = 0UL; + uint32_t backup_setting_adc_dma_transfer; /* Note: Variable not declared as volatile because register read is already declared as volatile */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Calibration prerequisite: ADC must be disabled. */ + + /* Disable the ADC (if not already disabled) */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Disable ADC DMA transfer request during calibration */ + /* Note: Specificity of this STM32 series: Calibration factor is */ + /* available in data register and also transferred by DMA. */ + /* To not insert ADC calibration factor among ADC conversion data */ + /* in array variable, DMA transfer must be disabled during */ + /* calibration. */ + backup_setting_adc_dma_transfer = READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG); + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG); + + /* Start ADC calibration */ + SET_BIT(hadc->Instance->CR, ADC_CR_ADCAL); + + /* Wait for calibration completion */ + while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) + { + wait_loop_index++; + if (wait_loop_index >= ADC_CALIBRATION_TIMEOUT) + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + + /* Restore ADC DMA transfer request after calibration */ + SET_BIT(hadc->Instance->CFGR1, backup_setting_adc_dma_transfer); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Note: No need to update variable "tmp_hal_status" here: already set */ + /* to state "HAL_ERROR" by function disabling the ADC. */ + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get the calibration factor. + * @param hadc ADC handle. + * @retval Calibration value. + */ +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return the selected ADC calibration value */ + return ((hadc->Instance->CALFACT) & 0x0000007FU); +} + +/** + * @brief Set the calibration factor to overwrite automatic conversion result. + * ADC must be enabled and no conversion is ongoing. + * @param hadc ADC handle + * @param CalibrationFactor Calibration factor (coded on 7 bits maximum) + * @retval HAL state + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_adc_is_conversion_on_going_regular; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CALFACT(CalibrationFactor)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Verification of hardware constraints before modifying the calibration */ + /* factors register: ADC must be enabled, no conversion on going. */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_conversion_on_going_regular == 0UL) + ) + { + hadc->Instance->CALFACT &= ~ADC_CALFACT_CALFACT; + hadc->Instance->CALFACT |= CalibrationFactor; + } + else + { + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + /* Update ADC error code */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + /* Update ADC state machine to error */ + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Analog watchdog 2 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow2Callback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 3 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow3Callback must be implemented in the user file. + */ +} + + +/** + * @brief End Of Sampling callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_EndOfSamplingCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC channel configuration ready callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_ChannelConfigReadyCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** + * @brief Disable ADC voltage regulator. + * @note Disabling voltage regulator allows to save power. This operation can + * be carried out only when ADC is disabled. + * @note To enable again the voltage regulator, the user is expected to + * resort to HAL_ADC_Init() API. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_DisableInternalRegulator(hadc->Instance); + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c new file mode 100644 index 0000000..6f99df3 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c @@ -0,0 +1,417 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex M0+ exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + -@- Negative value of IRQn_Type are not allowed. + + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x03). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32g0xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number . + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to stm32g0xx.h file) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 3. + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * with stm32g0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0+ based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn,PreemptPriority); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn) +{ + /* Get priority for Cortex-M system or device specific interrupts */ + return NVIC_GetPriority(IRQn); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Configure the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if (__MPU_PRESENT == 1U) +/** + * @brief Enable the MPU. + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + + +/** + * @brief Disable the MPU. + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != 0U) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00U; + MPU->RASR = 0x00U; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c new file mode 100644 index 0000000..45fe033 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c @@ -0,0 +1,1509 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac.c + * @author MCD Application Team + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Digital to Analog Converter (DAC) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + * + @verbatim + ============================================================================== + ##### DAC Peripheral features ##### + ============================================================================== + [..] + *** DAC Channels *** + ==================== + [..] + STM32G0 devices integrate two 12-bit Digital Analog Converters + + The 2 converters (i.e. channel1 & channel2) + can be used independently or simultaneously (dual mode): + (#) DAC channel1 with DAC_OUT1 (PA4) as output or connected to on-chip + peripherals (ex. timers). + (#) DAC channel2 with DAC_OUT2 (PA5) as output or connected to on-chip + peripherals (ex. timers). + + *** DAC Triggers *** + ==================== + [..] + Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE + and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register. + [..] + Digital to Analog conversion can be triggered by: + (#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9. + The used pin (GPIOx_PIN_9) must be configured in input mode. + + (#) Timers TRGO: TIM2, TIM3, TIM4, TIM5, TIM6 and TIM7 + (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T3_TRGO...) + + (#) Software using DAC_TRIGGER_SOFTWARE + + *** DAC Buffer mode feature *** + =============================== + [..] + Each DAC channel integrates an output buffer that can be used to + reduce the output impedance, and to drive external loads directly + without having to add an external operational amplifier. + To enable, the output buffer use + sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; + [..] + (@) Refer to the device datasheet for more details about output + impedance value with and without output buffer. + + *** DAC connect feature *** + =============================== + [..] + Each DAC channel can be connected internally. + To connect, use + sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_ENABLE; + + *** GPIO configurations guidelines *** + ===================== + [..] + When a DAC channel is used (ex channel1 on PA4) and the other is not + (ex channel2 on PA5 is configured in Analog and disabled). + Channel1 may disturb channel2 as coupling effect. + Note that there is no coupling on channel2 as soon as channel2 is turned on. + Coupling on adjacent channel could be avoided as follows: + when unused PA5 is configured as INPUT PULL-UP or DOWN. + PA5 is configured in ANALOG just before it is turned on. + + *** DAC Sample and Hold feature *** + ======================== + [..] + For each converter, 2 modes are supported: normal mode and + "sample and hold" mode (i.e. low power mode). + In the sample and hold mode, the DAC core converts data, then holds the + converted voltage on a capacitor. When not converting, the DAC cores and + buffer are completely turned off between samples and the DAC output is + tri-stated, therefore reducing the overall power consumption. A new + stabilization period is needed before each new conversion. + + The sample and hold allow setting internal or external voltage @ + low power consumption cost (output value can be at any given rate either + by CPU or DMA). + + The Sample and hold block and registers uses either LSI & run in + several power modes: run mode, sleep mode, low power run, low power sleep + mode & stop1 mode. + + Low power stop1 mode allows only static conversion. + + To enable Sample and Hold mode + Enable LSI using HAL_RCC_OscConfig with RCC_OSCILLATORTYPE_LSI & + RCC_LSI_ON parameters. + + Use DAC_InitStructure.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_ENABLE; + & DAC_ChannelConfTypeDef.DAC_SampleAndHoldConfig.DAC_SampleTime, + DAC_HoldTime & DAC_RefreshTime; + + *** DAC calibration feature *** + =================================== + [..] + (#) The 2 converters (channel1 & channel2) provide calibration capabilities. + (++) Calibration aims at correcting some offset of output buffer. + (++) The DAC uses either factory calibration settings OR user defined + calibration (trimming) settings (i.e. trimming mode). + (++) The user defined settings can be figured out using self calibration + handled by HAL_DACEx_SelfCalibrate. + (++) HAL_DACEx_SelfCalibrate: + (+++) Runs automatically the calibration. + (+++) Enables the user trimming mode + (+++) Updates a structure with trimming values with fresh calibration + results. + The user may store the calibration results for larger + (ex monitoring the trimming as a function of temperature + for instance) + + *** DAC wave generation feature *** + =================================== + [..] + Both DAC channels can be used to generate + (#) Noise wave + (#) Triangle wave + + *** DAC data format *** + ======================= + [..] + The DAC data format can be: + (#) 8-bit right alignment using DAC_ALIGN_8B_R + (#) 12-bit left alignment using DAC_ALIGN_12B_L + (#) 12-bit right alignment using DAC_ALIGN_12B_R + + *** DAC data value to voltage correspondence *** + ================================================ + [..] + The analog output voltage on each DAC channel pin is determined + by the following equation: + [..] + DAC_OUTx = VREF+ * DOR / 4095 + (+) with DOR is the Data Output Register + [..] + VEF+ is the input voltage reference (refer to the device datasheet) + [..] + e.g. To set DAC_OUT1 to 0.7V, use + (+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V + + *** DMA requests *** + ===================== + [..] + A DMA1 request can be generated when an external trigger (but not a software trigger) + occurs if DMA1 requests are enabled using HAL_DAC_Start_DMA(). + DMA requests are mapped as following: + (#) DAC channel1: mapped on DMA channel1 request 8 + (#) DAC channel2: mapped on DMA channel2 request 9 + + [..] + (@) For Dual mode and specific signal (Triangle and noise) generation please + refer to Extended Features Driver description + + ##### How to use this driver ##### + ============================================================================== + [..] + (+) DAC APB clock must be enabled to get write access to DAC + registers using HAL_DAC_Init() + (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode. + (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function. + (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA() functions. + + *** Calibration mode IO operation *** + ====================================== + [..] + (+) Retrieve the factory trimming (calibration settings) using HAL_DACEx_GetTrimOffset() + (+) Run the calibration using HAL_DACEx_SelfCalibrate() + (+) Update the trimming while DAC running using HAL_DACEx_SetUserTrimming() + + *** Polling mode IO operation *** + ================================= + [..] + (+) Start the DAC peripheral using HAL_DAC_Start() + (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function. + (+) Stop the DAC peripheral using HAL_DAC_Stop() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length + of data to be transferred at each end of conversion + First issued trigger will start the conversion of the value previously set by HAL_DAC_SetValue(). + (+) At the middle of data transfer HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 + (+) In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler. + HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() and + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1() + (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_DAC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions @ref HAL_DAC_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. + (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. + (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. + (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_DAC_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. + (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. + (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. + (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + (+) All Callbacks + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the @ref HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_DAC_Init + and @ref HAL_DAC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_DAC_Init and @ref HAL_DAC_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_DAC_RegisterCallback before calling @ref HAL_DAC_DeInit + or @ref HAL_DAC_Init function. + + When The compilation define USE_HAL_DAC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + *** DAC HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DAC HAL driver. + + (+) __HAL_DAC_ENABLE : Enable the DAC peripheral + (+) __HAL_DAC_DISABLE : Disable the DAC peripheral + (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags + (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status + + [..] + (@) You can refer to the DAC HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED +#if defined(DAC1) + +/** @defgroup DAC DAC + * @brief DAC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup DAC_Private_Constants DAC Private Constants + * @{ + */ +#define TIMEOUT_DAC_CALIBCONFIG 1U /* 1 ms */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions -------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Functions DAC Exported Functions + * @{ + */ + +/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DAC. + (+) De-initialize the DAC. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DAC peripheral according to the specified parameters + * in the DAC_InitStruct and initialize the associated handle. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac) +{ + /* Check DAC handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + if (hdac->State == HAL_DAC_STATE_RESET) + { +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the DAC Callback settings */ + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; + + if (hdac->MspInitCallback == NULL) + { + hdac->MspInitCallback = HAL_DAC_MspInit; + } +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Allocate lock resource and initialize it */ + hdac->Lock = HAL_UNLOCKED; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the low level hardware */ + hdac->MspInitCallback(hdac); +#else + /* Init the low level hardware */ + HAL_DAC_MspInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitialize the DAC peripheral registers to their default reset values. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac) +{ + /* Check DAC handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + if (hdac->MspDeInitCallback == NULL) + { + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + } + /* DeInit the low level hardware */ + hdac->MspDeInitCallback(hdac); +#else + /* DeInit the low level hardware */ + HAL_DAC_MspDeInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + + if (Channel == DAC_CHANNEL_1) + { + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE) + { + /* Enable the selected DAC software conversion */ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1); + } + } + else + { + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << Channel)) + { + /* Enable the selected DAC software conversion*/ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2); + } + } + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param pData The destination peripheral Buffer address. + * @param Length The length of data to be transferred from memory to DAC peripheral + * @param Alignment Specifies the data alignment for DAC channel. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, + uint32_t Alignment) +{ + HAL_StatusTypeDef status; + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + if (Channel == DAC_CHANNEL_1) + { + /* Set the DMA transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1; + + /* Set the DMA half transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1; + + /* Set the DMA error callback for channel1 */ + hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1; + + /* Enable the selected DAC channel1 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); + + /* Case of use of channel 1 */ + switch (Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R1; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L1; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R1; + break; + default: + break; + } + } + else + { + /* Set the DMA transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2; + + /* Set the DMA half transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2; + + /* Set the DMA error callback for channel2 */ + hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2; + + /* Enable the selected DAC channel2 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); + + /* Case of use of channel 2 */ + switch (Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R2; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L2; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R2; + break; + default: + break; + } + } + + /* Enable the DMA channel */ + if (Channel == DAC_CHANNEL_1) + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1); + + /* Enable the DMA channel */ + status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length); + } + else + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2); + + /* Enable the DMA channel */ + status = HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdac); + + if (status == HAL_OK) + { + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + } + else + { + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + } + + /* Return function status */ + return status; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the selected DAC channel DMA request */ + hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << (Channel & 0x10UL)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Disable the DMA channel */ + + /* Channel1 is used */ + if (Channel == DAC_CHANNEL_1) + { + /* Disable the DMA channel */ + status = HAL_DMA_Abort(hdac->DMA_Handle1); + + /* Disable the DAC DMA underrun interrupt */ + __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1); + } + else /* Channel2 is used for */ + { + /* Disable the DMA channel */ + status = HAL_DMA_Abort(hdac->DMA_Handle2); + + /* Disable the DAC DMA underrun interrupt */ + __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2); + } + + /* Check if DMA Channel effectively disabled */ + if (status != HAL_OK) + { + /* Update DAC state machine to error */ + hdac->State = HAL_DAC_STATE_ERROR; + } + else + { + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Handles DAC interrupt request + * This function uses the interruption of DMA + * underrun. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) +{ + if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1)) + { + /* Check underrun flag of DAC channel 1 */ + if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to chanel1 DMA underrun error */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH1); + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR1); + + /* Disable the selected DAC channel1 DMA request */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); + + /* Error callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->DMAUnderrunCallbackCh1(hdac); +#else + HAL_DAC_DMAUnderrunCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + } + + if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2)) + { + /* Check underrun flag of DAC channel 2 */ + if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to channel2 DMA underrun error */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH2); + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR2); + + /* Disable the selected DAC channel2 DMA request */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); + + /* Error callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->DMAUnderrunCallbackCh2(hdac); +#else + HAL_DACEx_DMAUnderrunCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Set the specified data holding register value for DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Alignment Specifies the data alignment. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data Data to be loaded in the selected data holding register. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)hdac->Instance; + if (Channel == DAC_CHANNEL_1) + { + tmp += DAC_DHR12R1_ALIGNMENT(Alignment); + } + else + { + tmp += DAC_DHR12R2_ALIGNMENT(Alignment); + } + + /* Set the DAC channel selected data holding register */ + *(__IO uint32_t *) tmp = Data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Conversion complete callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels. + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Returns the DAC channel data output register value */ + if (Channel == DAC_CHANNEL_1) + { + return hdac->Instance->DOR1; + } + else + { + return hdac->Instance->DOR2; + } +} + +/** + * @brief Configures the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC configuration structure. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) +{ + uint32_t tmpreg1; + uint32_t tmpreg2; + uint32_t tickstart = 0U; + + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer)); + assert_param(IS_DAC_CHIP_CONNECTION(sConfig->DAC_ConnectOnChipPeripheral)); + assert_param(IS_DAC_TRIMMING(sConfig->DAC_UserTrimming)); + if ((sConfig->DAC_UserTrimming) == DAC_TRIMMING_USER) + { + assert_param(IS_DAC_TRIMMINGVALUE(sConfig->DAC_TrimmingValue)); + } + assert_param(IS_DAC_SAMPLEANDHOLD(sConfig->DAC_SampleAndHold)); + if ((sConfig->DAC_SampleAndHold) == DAC_SAMPLEANDHOLD_ENABLE) + { + assert_param(IS_DAC_SAMPLETIME(sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime)); + assert_param(IS_DAC_HOLDTIME(sConfig->DAC_SampleAndHoldConfig.DAC_HoldTime)); + assert_param(IS_DAC_REFRESHTIME(sConfig->DAC_SampleAndHoldConfig.DAC_RefreshTime)); + } + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + if (sConfig->DAC_SampleAndHold == DAC_SAMPLEANDHOLD_ENABLE) + /* Sample on old configuration */ + { + /* SampleTime */ + if (Channel == DAC_CHANNEL_1) + { + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* SHSR1 can be written when BWST1 is cleared */ + while (((hdac->Instance->SR) & DAC_SR_BWST1) != 0UL) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > TIMEOUT_DAC_CALIBCONFIG) + { + /* Update error code */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_TIMEOUT); + + /* Change the DMA state */ + hdac->State = HAL_DAC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + HAL_Delay(1); + hdac->Instance->SHSR1 = sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime; + } + else /* Channel 2 */ + { + /* SHSR2 can be written when BWST2 is cleared */ + + while (((hdac->Instance->SR) & DAC_SR_BWST2) != 0UL) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > TIMEOUT_DAC_CALIBCONFIG) + { + /* Update error code */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_TIMEOUT); + + /* Change the DMA state */ + hdac->State = HAL_DAC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + HAL_Delay(1U); + hdac->Instance->SHSR2 = sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime; + } + + /* HoldTime */ + MODIFY_REG(hdac->Instance->SHHR, DAC_SHHR_THOLD1 << (Channel & 0x10UL), (sConfig->DAC_SampleAndHoldConfig.DAC_HoldTime) << (Channel & 0x10UL)); + /* RefreshTime */ + MODIFY_REG(hdac->Instance->SHRR, DAC_SHRR_TREFRESH1 << (Channel & 0x10UL), (sConfig->DAC_SampleAndHoldConfig.DAC_RefreshTime) << (Channel & 0x10UL)); + } + + if (sConfig->DAC_UserTrimming == DAC_TRIMMING_USER) + /* USER TRIMMING */ + { + /* Get the DAC CCR value */ + tmpreg1 = hdac->Instance->CCR; + /* Clear trimming value */ + tmpreg1 &= ~(((uint32_t)(DAC_CCR_OTRIM1)) << (Channel & 0x10UL)); + /* Configure for the selected trimming offset */ + tmpreg2 = sConfig->DAC_TrimmingValue; + /* Calculate CCR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC CCR */ + hdac->Instance->CCR = tmpreg1; + } + /* else factory trimming is used (factory setting are available at reset)*/ + /* SW Nothing has nothing to do */ + + /* Get the DAC MCR value */ + tmpreg1 = hdac->Instance->MCR; + /* Clear DAC_MCR_MODEx bits */ + tmpreg1 &= ~(((uint32_t)(DAC_MCR_MODE1)) << (Channel & 0x10UL)); + /* Configure for the selected DAC channel: mode, buffer output & on chip peripheral connect */ + tmpreg2 = (sConfig->DAC_SampleAndHold | sConfig->DAC_OutputBuffer | sConfig->DAC_ConnectOnChipPeripheral); + /* Calculate MCR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC MCR */ + hdac->Instance->MCR = tmpreg1; + + /* DAC in normal operating mode hence clear DAC_CR_CENx bit */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_CEN1 << (Channel & 0x10UL)); + + /* Get the DAC CR value */ + tmpreg1 = hdac->Instance->CR; + /* Clear TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1)) << (Channel & 0x10UL)); + /* Configure for the selected DAC channel: trigger */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + tmpreg2 = sConfig->DAC_Trigger; + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC CR */ + hdac->Instance->CR = tmpreg1; + /* Disable wave generation */ + hdac->Instance->CR &= ~(DAC_CR_WAVE1 << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DAC state. + (+) Check the DAC Errors. + +@endverbatim + * @{ + */ + +/** + * @brief return the DAC handle state + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL state + */ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac) +{ + /* Return DAC handle state */ + return hdac->State; +} + + +/** + * @brief Return the DAC error code + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval DAC Error Code + */ +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac) +{ + return hdac->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DAC Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hdac DAC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_ERROR_INVALID_CALLBACK DAC Error Callback ID + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID + * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID + * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID + * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdac); + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = pCallback; + break; + case HAL_DAC_CH2_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_ERROR_ID : + hdac->ErrorCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh2 = pCallback; + break; + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdac); + return status; +} + +/** + * @brief Unregister a User DAC Callback + * DAC Callback is redirected to the weak (surcharged) predefined callback + * @param hdac DAC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Transfer Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID + * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID + * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID + * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * @arg @ref HAL_DAC_ALL_CB_ID DAC All callbacks + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdac); + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + break; + case HAL_DAC_CH2_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + break; + case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + break; + case HAL_DAC_CH2_ERROR_ID : + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + break; + case HAL_DAC_CH2_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; + break; + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + case HAL_DAC_ALL_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; + hdac->MspInitCallback = HAL_DAC_MspInit; + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdac); + return status; +} +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Private_Functions + * @{ + */ + +/** + * @brief DMA conversion complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* Conversion complete callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvHalfCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvHalfCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ErrorCallbackCh1(hdac); +#else + HAL_DAC_ErrorCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c new file mode 100644 index 0000000..330a2ce --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c @@ -0,0 +1,621 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac_ex.c + * @author MCD Application Team + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the DAC peripheral. + * + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** Dual mode IO operation *** + ============================== + (+) When Dual mode is enabled (i.e. DAC Channel1 and Channel2 are used simultaneously) : + Use HAL_DACEx_DualGetValue() to get digital data to be converted and use + HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in + Channel 1 and Channel 2. + + *** Signal generation operation *** + =================================== + (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. + (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. + + (+) HAL_DACEx_SelfCalibrate to calibrate one DAC channel. + (+) HAL_DACEx_SetUserTrimming to set user trimming value. + (+) HAL_DACEx_GetTrimOffset to retrieve trimming value (factory setting + after reset, user setting if HAL_DACEx_SetUserTrimming have been used + at least one time after reset). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED + +#if defined(DAC1) + +/** @defgroup DACEx DACEx + * @brief DAC Extended HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Functions DACEx Exported Functions + * @{ + */ + +/** @defgroup DACEx_Exported_Functions_Group2 IO operation functions + * @brief Extended IO operation functions + * +@verbatim + ============================================================================== + ##### Extended features functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + (+) Get result of dual mode conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Amplitude Select max triangle amplitude. + * This parameter can be one of the following values: + * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 + * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 + * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 + * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 + * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 + * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 + * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 + * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 + * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 + * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 + * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 + * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the triangle wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_1 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Amplitude Unmask DAC channel LFSR for noise wave generation. + * This parameter can be one of the following values: + * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation + * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the noise wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_0 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the specified data holding register value for dual DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Alignment Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * DAC_ALIGN_8B_R: 8bit right data alignment selected + * DAC_ALIGN_12B_L: 12bit left data alignment selected + * DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data1 Data for DAC Channel1 to be loaded in the selected data holding register. + * @param Data2 Data for DAC Channel2 to be loaded in the selected data holding register. + * @note In dual mode, a unique register access is required to write in both + * DAC channels at the same time. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2) +{ + uint32_t data; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (Alignment == DAC_ALIGN_8B_R) + { + data = ((uint32_t)Data2 << 8U) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16U) | Data1; + } + + tmp = (uint32_t)hdac->Instance; + tmp += DAC_DHR12RD_ALIGNMENT(Alignment); + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Conversion complete callback in non-blocking mode for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ConvCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non-blocking mode for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Run the self calibration of one DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC channel configuration structure. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval Updates DAC_TrimmingValue. , DAC_UserTrimming set to DAC_UserTrimming + * @retval HAL status + * @note Calibration runs about 7 ms. + */ + +HAL_StatusTypeDef HAL_DACEx_SelfCalibrate(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + __IO uint32_t tmp; + uint32_t trimmingvalue; + uint32_t delta; + + /* store/restore channel configuration structure purpose */ + uint32_t oldmodeconfiguration; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Check the DAC handle allocation */ + /* Check if DAC running */ + if (hdac == NULL) + { + status = HAL_ERROR; + } + else if (hdac->State == HAL_DAC_STATE_BUSY) + { + status = HAL_ERROR; + } + else + { + /* Process locked */ + __HAL_LOCK(hdac); + + /* Store configuration */ + oldmodeconfiguration = (hdac->Instance->MCR & (DAC_MCR_MODE1 << (Channel & 0x10UL))); + + /* Disable the selected DAC channel */ + CLEAR_BIT((hdac->Instance->CR), (DAC_CR_EN1 << (Channel & 0x10UL))); + + /* Set mode in MCR for calibration */ + MODIFY_REG(hdac->Instance->MCR, (DAC_MCR_MODE1 << (Channel & 0x10UL)), 0U); + + /* Set DAC Channel1 DHR register to the middle value */ + tmp = (uint32_t)hdac->Instance; + + if (Channel == DAC_CHANNEL_1) + { + tmp += DAC_DHR12R1_ALIGNMENT(DAC_ALIGN_12B_R); + } + else + { + tmp += DAC_DHR12R2_ALIGNMENT(DAC_ALIGN_12B_R); + } + + *(__IO uint32_t *) tmp = 0x0800U; + + /* Enable the selected DAC channel calibration */ + /* i.e. set DAC_CR_CENx bit */ + SET_BIT((hdac->Instance->CR), (DAC_CR_CEN1 << (Channel & 0x10UL))); + + /* Init trimming counter */ + /* Medium value */ + trimmingvalue = 16U; + delta = 8U; + while (delta != 0U) + { + /* Set candidate trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (trimmingvalue << (Channel & 0x10UL))); + + /* tOFFTRIMmax delay x ms as per datasheet (electrical characteristics */ + /* i.e. minimum time needed between two calibration steps */ + HAL_Delay(1); + + if ((hdac->Instance->SR & (DAC_SR_CAL_FLAG1 << (Channel & 0x10UL))) == (DAC_SR_CAL_FLAG1 << (Channel & 0x10UL))) + { + /* DAC_SR_CAL_FLAGx is HIGH try higher trimming */ + trimmingvalue -= delta; + } + else + { + /* DAC_SR_CAL_FLAGx is LOW try lower trimming */ + trimmingvalue += delta; + } + delta >>= 1U; + } + + /* Still need to check if right calibration is current value or one step below */ + /* Indeed the first value that causes the DAC_SR_CAL_FLAGx bit to change from 0 to 1 */ + /* Set candidate trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (trimmingvalue << (Channel & 0x10UL))); + + /* tOFFTRIMmax delay x ms as per datasheet (electrical characteristics */ + /* i.e. minimum time needed between two calibration steps */ + HAL_Delay(1U); + + if ((hdac->Instance->SR & (DAC_SR_CAL_FLAG1 << (Channel & 0x10UL))) == 0UL) + { + /* OPAMP_CSR_OUTCAL is actually one value more */ + trimmingvalue++; + /* Set right trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (trimmingvalue << (Channel & 0x10UL))); + } + + /* Disable the selected DAC channel calibration */ + /* i.e. clear DAC_CR_CENx bit */ + CLEAR_BIT((hdac->Instance->CR), (DAC_CR_CEN1 << (Channel & 0x10UL))); + + sConfig->DAC_TrimmingValue = trimmingvalue; + sConfig->DAC_UserTrimming = DAC_TRIMMING_USER; + + /* Restore configuration */ + MODIFY_REG(hdac->Instance->MCR, (DAC_MCR_MODE1 << (Channel & 0x10UL)), oldmodeconfiguration); + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + } + + return status; +} + +/** + * @brief Set the trimming mode and trimming value (user trimming mode applied). + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC configuration structure updated with new DAC trimming value. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param NewTrimmingValue DAC new trimming value + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_DACEx_SetUserTrimming(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel, + uint32_t NewTrimmingValue) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_NEWTRIMMINGVALUE(NewTrimmingValue)); + + /* Check the DAC handle allocation */ + if (hdac == NULL) + { + status = HAL_ERROR; + } + else + { + /* Process locked */ + __HAL_LOCK(hdac); + + /* Set new trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (NewTrimmingValue << (Channel & 0x10UL))); + + /* Update trimming mode */ + sConfig->DAC_UserTrimming = DAC_TRIMMING_USER; + sConfig->DAC_TrimmingValue = NewTrimmingValue; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + } + return status; +} + +/** + * @brief Return the DAC trimming value. + * @param hdac DAC handle + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval Trimming value : range: 0->31 + * + */ + +uint32_t HAL_DACEx_GetTrimOffset(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameter */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Retrieve trimming */ + return ((hdac->Instance->CCR & (DAC_CCR_OTRIM1 << (Channel & 0x10UL))) >> (Channel & 0x10UL)); +} + +/** + * @} + */ + +/** @defgroup DACEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +/** + * @brief Return the last data output value of the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac) +{ + uint32_t tmp = 0U; + + tmp |= hdac->Instance->DOR1; + + tmp |= hdac->Instance->DOR2 << 16U; + + /* Returns the DAC channel data output register value */ + return tmp; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DACEx_Private_Functions DACEx private functions + * @brief Extended private functions + * @{ + */ + +/** + * @brief DMA conversion complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvCpltCallbackCh2(hdac); +#else + HAL_DACEx_ConvCpltCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* Conversion complete callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvHalfCpltCallbackCh2(hdac); +#else + HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ErrorCallbackCh2(hdac); +#else + HAL_DACEx_ErrorCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c new file mode 100644 index 0000000..6548d57 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c @@ -0,0 +1,1192 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX + thanks to: + (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(); + (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function to register callbacks with HAL_DMA_RegisterCallback(). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); + + /* Compute the channel index */ +#if defined(DMA2) + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; +#endif + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ + CLEAR_BIT(hdma->Instance->CCR, (DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + + /* Set the DMA Channel configuration */ + SET_BIT(hdma->Instance->CCR, (hdma->Init.Direction | \ + hdma->Init.PeriphInc | hdma->Init.MemInc | \ + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | \ + hdma->Init.Mode | hdma->Init.Priority)); + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* Compute the channel index */ +#if defined(DMA2) + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; +#endif + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + /* Reset the DMAMUX channel that corresponds to the DMA channel */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Reset Request generator parameters if any */ + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + (+) Register and Unregister DMA callbacks + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Change the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if (NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + + /* Check if DMAMUX Synchronization is enabled*/ + if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Change the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA peripheral handle */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart; + + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU); + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + +#if defined(DMA2) + while ((hdma->DmaBaseAddress->ISR & temp) == 0U) + { + if ((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } +#else + while (0U == __HAL_DMA_GET_FLAG(hdma, temp)) + { + if (0U != __HAL_DMA_GET_FLAG(hdma, (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU)))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } +#endif + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + /*Check for DMAMUX Request generator (if used) overrun status */ + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } + + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))); +#endif + } + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ +#if defined(DMA2) + uint32_t flag_it = hdma->DmaBaseAddress->ISR; +#else + uint32_t flag_it = DMA1->ISR; +#endif + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((0U != (flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)))) && (0U != (source_it & DMA_IT_TC))) + { + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + return; +} + +/** + * @brief Register callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback Pointer to private callbacsk function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA handle state. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + /* Return the DMA error code */ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on channel number + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t channel_number; + +#if defined(DMA2) + /* check if instance is not outside the DMA channel range */ + if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) + { + /* DMA1 */ + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; + } + else + { + /* DMA2 */ + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel7 + (hdma->ChannelIndex >> 2U)); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U) + 7U); + } +#else + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)(uint32_t)((uint32_t)DMAMUX1_Channel0 + ((hdma->ChannelIndex >> 2U) * ((uint32_t)DMAMUX1_Channel1 - (uint32_t)DMAMUX1_Channel0))); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; +#endif + + /* Initialize the field DMAmuxChannelStatus to DMAMUX1_ChannelStatus base */ + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + + /* Initialize the field DMAmuxChannelStatusMask with the corresponding index of the DMAMUX channel selected for the current ChannelIndex */ + hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1FU); +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ + +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + /* DMA Channels are connected to DMAMUX1 request generator blocks*/ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + + /* here "Request" is either DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR3, i.e. <= 4*/ + hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c new file mode 100644 index 0000000..1b2b909 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c @@ -0,0 +1,320 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler. + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be + called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + + +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + (+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from + the DMAMUX IRQ handler + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pSyncConfig Pointer to HAL_DMA_MuxSyncConfigTypeDef contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + /*Check if the DMA state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG(hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID), \ + (pSyncConfig->SyncSignalID | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ + pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos))); + + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pRequestGeneratorConfig Pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + HAL_StatusTypeDef status; + HAL_DMA_StateTypeDef temp_state = hdma->State; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if (hdma->DMAmuxRequestGen == 0U) + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* error status */ + status = HAL_ERROR; + } + else if (((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY)) + { + /* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */ + + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters*/ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \ + pRequestGeneratorConfig->Polarity; + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if (hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c new file mode 100644 index 0000000..db1b102 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c @@ -0,0 +1,681 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two diffenrents + interrupt pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x04u /* 0x10: offset between CPU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between CPU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + EXTI->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* Configure event mode : read current mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configiguration structure */ + pExtiConfig->Line = hexti->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + } + + /* Get falling configuration */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = ((regval << (EXTI_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); + } + else + { + pExtiConfig->GPIOSel = 0x00u; + } + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + EXTI->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicaated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->RisingCallback = pPendingCbfn; + hexti->FallingCallback = pPendingCbfn; + break; + + case HAL_EXTI_RISING_CB_ID: + hexti->RisingCallback = pPendingCbfn; + break; + + case HAL_EXTI_FALLING_CB_ID: + hexti->FallingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get rising edge pending bit */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->RisingCallback != NULL) + { + hexti->RisingCallback(); + } + } + + /* Get falling edge pending bit */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->FallingCallback != NULL) + { + hexti->FallingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending bit */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get rising edge pending bit */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending register address */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get falling edge pending register address */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* Clear Pending bit */ + *regaddr = maskline; +} + + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameterd */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c new file mode 100644 index 0000000..b649f4c --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c @@ -0,0 +1,3455 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_fdcan.c + * @author MCD Application Team + * @brief FDCAN HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Flexible DataRate Controller Area Network + * (FDCAN) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Configuration and Control functions + * + Peripheral State and Error functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the FDCAN peripheral using HAL_FDCAN_Init function. + + (#) If needed , configure the reception filters and optional features using + the following configuration functions: + (++) HAL_FDCAN_ConfigFilter + (++) HAL_FDCAN_ConfigGlobalFilter + (++) HAL_FDCAN_ConfigExtendedIdMask + (++) HAL_FDCAN_ConfigRxFifoOverwrite + (++) HAL_FDCAN_ConfigRamWatchdog + (++) HAL_FDCAN_ConfigTimestampCounter + (++) HAL_FDCAN_EnableTimestampCounter + (++) HAL_FDCAN_DisableTimestampCounter + (++) HAL_FDCAN_ConfigTimeoutCounter + (++) HAL_FDCAN_EnableTimeoutCounter + (++) HAL_FDCAN_DisableTimeoutCounter + (++) HAL_FDCAN_ConfigTxDelayCompensation + (++) HAL_FDCAN_EnableTxDelayCompensation + (++) HAL_FDCAN_DisableTxDelayCompensation + (++) HAL_FDCAN_EnableISOMode + (++) HAL_FDCAN_DisableISOMode + (++) HAL_FDCAN_EnableEdgeFiltering + (++) HAL_FDCAN_DisableEdgeFiltering + + (#) Start the FDCAN module using HAL_FDCAN_Start function. At this level + the node is active on the bus: it can send and receive messages. + + (#) The following Tx control functions can only be called when the FDCAN + module is started: + (++) HAL_FDCAN_AddMessageToTxFifoQ + (++) HAL_FDCAN_AbortTxRequest + + (#) After having submitted a Tx request in Tx Fifo or Queue, it is possible to + get Tx buffer location used to place the Tx request thanks to + HAL_FDCAN_GetLatestTxFifoQRequestBuffer API. + It is then possible to abort later on the corresponding Tx Request using + HAL_FDCAN_AbortTxRequest API. + + (#) When a message is received into the FDCAN message RAM, it can be + retrieved using the HAL_FDCAN_GetRxMessage function. + + (#) Calling the HAL_FDCAN_Stop function stops the FDCAN module by entering + it to initialization mode and re-enabling access to configuration + registers through the configuration functions listed here above. + + (#) All other control functions can be called any time after initialization + phase, no matter if the FDCAN module is started or stopped. + + *** Polling mode operation *** + ============================== + [..] + (#) Reception and transmission states can be monitored via the following + functions: + (++) HAL_FDCAN_IsTxBufferMessagePending + (++) HAL_FDCAN_GetRxFifoFillLevel + (++) HAL_FDCAN_GetTxFifoFreeLevel + + *** Interrupt mode operation *** + ================================ + [..] + (#) There are two interrupt lines: line 0 and 1. + By default, all interrupts are assigned to line 0. Interrupt lines + can be configured using HAL_FDCAN_ConfigInterruptLines function. + + (#) Notifications are activated using HAL_FDCAN_ActivateNotification + function. Then, the process can be controlled through one of the + available user callbacks: HAL_FDCAN_xxxCallback. + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_FDCAN_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_FDCAN_RegisterCallback() or HAL_FDCAN_RegisterXXXCallback() + to register an interrupt callback. + + Function @ref HAL_FDCAN_RegisterCallback() allows to register following callbacks: + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) HighPriorityMessageCallback : High Priority Message Callback. + (+) TimestampWraparoundCallback : Timestamp Wraparound Callback. + (+) TimeoutOccurredCallback : Timeout Occurred Callback. + (+) ErrorCallback : Error Callback. + (+) MspInitCallback : FDCAN MspInit. + (+) MspDeInitCallback : FDCAN MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callbacks TxEventFifoCallback, RxFifo0Callback, RxFifo1Callback, + TxBufferCompleteCallback, TxBufferAbortCallback and ErrorStatusCallback use dedicated + register callbacks : respectively @ref HAL_FDCAN_RegisterTxEventFifoCallback(), + @ref HAL_FDCAN_RegisterRxFifo0Callback(), @ref HAL_FDCAN_RegisterRxFifo1Callback(), + @ref HAL_FDCAN_RegisterTxBufferCompleteCallback(), @ref HAL_FDCAN_RegisterTxBufferAbortCallback() + and @ref HAL_FDCAN_RegisterErrorStatusCallback(). + + Use function @ref HAL_FDCAN_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_FDCAN_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) HighPriorityMessageCallback : High Priority Message Callback. + (+) TimestampWraparoundCallback : Timestamp Wraparound Callback. + (+) TimeoutOccurredCallback : Timeout Occurred Callback. + (+) ErrorCallback : Error Callback. + (+) MspInitCallback : FDCAN MspInit. + (+) MspDeInitCallback : FDCAN MspDeInit. + + For specific callbacks TxEventFifoCallback, RxFifo0Callback, RxFifo1Callback, + TxBufferCompleteCallback and TxBufferAbortCallback, use dedicated + unregister callbacks : respectively @ref HAL_FDCAN_UnRegisterTxEventFifoCallback(), + @ref HAL_FDCAN_UnRegisterRxFifo0Callback(), @ref HAL_FDCAN_UnRegisterRxFifo1Callback(), + @ref HAL_FDCAN_UnRegisterTxBufferCompleteCallback(), @ref HAL_FDCAN_UnRegisterTxBufferAbortCallback() + and @ref HAL_FDCAN_UnRegisterErrorStatusCallback(). + + By default, after the @ref HAL_FDCAN_Init() and when the state is HAL_FDCAN_STATE_RESET, + all callbacks are set to the corresponding weak functions: + examples @ref HAL_FDCAN_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the @ref HAL_FDCAN_Init()/ @ref HAL_FDCAN_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the @ref HAL_FDCAN_Init()/ @ref HAL_FDCAN_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_FDCAN_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_FDCAN_STATE_READY or HAL_FDCAN_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_FDCAN_RegisterCallback() before calling @ref HAL_FDCAN_DeInit() + or @ref HAL_FDCAN_Init() function. + + When The compilation define USE_HAL_FDCAN_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +#if defined(FDCAN1) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FDCAN FDCAN + * @brief FDCAN HAL module driver + * @{ + */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FDCAN_Private_Constants + * @{ + */ +#define FDCAN_TIMEOUT_VALUE 10U + +#define FDCAN_TX_EVENT_FIFO_MASK (FDCAN_IR_TEFL | FDCAN_IR_TEFF | FDCAN_IR_TEFN) +#define FDCAN_RX_FIFO0_MASK (FDCAN_IR_RF0L | FDCAN_IR_RF0F | FDCAN_IR_RF0N) +#define FDCAN_RX_FIFO1_MASK (FDCAN_IR_RF1L | FDCAN_IR_RF1F | FDCAN_IR_RF1N) +#define FDCAN_ERROR_MASK (FDCAN_IR_ELO | FDCAN_IR_WDI | FDCAN_IR_PEA | FDCAN_IR_PED | FDCAN_IR_ARA) +#define FDCAN_ERROR_STATUS_MASK (FDCAN_IR_EP | FDCAN_IR_EW | FDCAN_IR_BO) + +#define FDCAN_ELEMENT_MASK_STDID ((uint32_t)0x1FFC0000U) /* Standard Identifier */ +#define FDCAN_ELEMENT_MASK_EXTID ((uint32_t)0x1FFFFFFFU) /* Extended Identifier */ +#define FDCAN_ELEMENT_MASK_RTR ((uint32_t)0x20000000U) /* Remote Transmission Request */ +#define FDCAN_ELEMENT_MASK_XTD ((uint32_t)0x40000000U) /* Extended Identifier */ +#define FDCAN_ELEMENT_MASK_ESI ((uint32_t)0x80000000U) /* Error State Indicator */ +#define FDCAN_ELEMENT_MASK_TS ((uint32_t)0x0000FFFFU) /* Timestamp */ +#define FDCAN_ELEMENT_MASK_DLC ((uint32_t)0x000F0000U) /* Data Length Code */ +#define FDCAN_ELEMENT_MASK_BRS ((uint32_t)0x00100000U) /* Bit Rate Switch */ +#define FDCAN_ELEMENT_MASK_FDF ((uint32_t)0x00200000U) /* FD Format */ +#define FDCAN_ELEMENT_MASK_EFC ((uint32_t)0x00800000U) /* Event FIFO Control */ +#define FDCAN_ELEMENT_MASK_MM ((uint32_t)0xFF000000U) /* Message Marker */ +#define FDCAN_ELEMENT_MASK_FIDX ((uint32_t)0x7F000000U) /* Filter Index */ +#define FDCAN_ELEMENT_MASK_ANMF ((uint32_t)0x80000000U) /* Accepted Non-matching Frame */ +#define FDCAN_ELEMENT_MASK_ET ((uint32_t)0x00C00000U) /* Event type */ + +#define SRAMCAN_FLS_NBR (28U) /* Max. Filter List Standard Number */ +#define SRAMCAN_FLE_NBR ( 8U) /* Max. Filter List Extended Number */ +#define SRAMCAN_RF0_NBR ( 3U) /* RX FIFO 0 Elements Number */ +#define SRAMCAN_RF1_NBR ( 3U) /* RX FIFO 1 Elements Number */ +#define SRAMCAN_TEF_NBR ( 3U) /* TX Event FIFO Elements Number */ +#define SRAMCAN_TFQ_NBR ( 3U) /* TX FIFO/Queue Elements Number */ + +#define SRAMCAN_FLS_SIZE ( 1U * 4U) /* Filter Standard Element Size in bytes */ +#define SRAMCAN_FLE_SIZE ( 2U * 4U) /* Filter Extended Element Size in bytes */ +#define SRAMCAN_RF0_SIZE (18U * 4U) /* RX FIFO 0 Elements Size in bytes */ +#define SRAMCAN_RF1_SIZE (18U * 4U) /* RX FIFO 1 Elements Size in bytes */ +#define SRAMCAN_TEF_SIZE ( 2U * 4U) /* TX Event FIFO Elements Size in bytes */ +#define SRAMCAN_TFQ_SIZE (18U * 4U) /* TX FIFO/Queue Elements Size in bytes */ + +#define SRAMCAN_FLSSA ((uint32_t)0) /* Filter List Standard Start Address */ +#define SRAMCAN_FLESA ((uint32_t)(SRAMCAN_FLSSA + (SRAMCAN_FLS_NBR * SRAMCAN_FLS_SIZE))) /* Filter List Extended Start Address */ +#define SRAMCAN_RF0SA ((uint32_t)(SRAMCAN_FLESA + (SRAMCAN_FLE_NBR * SRAMCAN_FLE_SIZE))) /* Rx FIFO 0 Start Address */ +#define SRAMCAN_RF1SA ((uint32_t)(SRAMCAN_RF0SA + (SRAMCAN_RF0_NBR * SRAMCAN_RF0_SIZE))) /* Rx FIFO 1 Start Address */ +#define SRAMCAN_TEFSA ((uint32_t)(SRAMCAN_RF1SA + (SRAMCAN_RF1_NBR * SRAMCAN_RF1_SIZE))) /* Tx Event FIFO Start Address */ +#define SRAMCAN_TFQSA ((uint32_t)(SRAMCAN_TEFSA + (SRAMCAN_TEF_NBR * SRAMCAN_TEF_SIZE))) /* Tx FIFO/Queue Start Address */ +#define SRAMCAN_SIZE ((uint32_t)(SRAMCAN_TFQSA + (SRAMCAN_TFQ_NBR * SRAMCAN_TFQ_SIZE))) /* Message RAM size */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +static const uint8_t DLCtoBytes[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, 24, 32, 48, 64}; + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup FDCAN_Private_Functions_Prototypes + * @{ + */ +static void FDCAN_CalcultateRamBlockAddresses(FDCAN_HandleTypeDef *hfdcan); +static void FDCAN_CopyMessageToRAM(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData, uint32_t BufferIndex); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Functions FDCAN Exported Functions + * @{ + */ + +/** @defgroup FDCAN_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the FDCAN. + (+) De-initialize the FDCAN. + (+) Enter FDCAN peripheral in power down mode. + (+) Exit power down mode. + (+) Register callbacks. + (+) Unregister callbacks. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FDCAN peripheral according to the specified + * parameters in the FDCAN_InitTypeDef structure. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Init(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Check FDCAN handle */ + if (hfdcan == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_FDCAN_ALL_INSTANCE(hfdcan->Instance)); + if (hfdcan->Instance == FDCAN1) + { + assert_param(IS_FDCAN_CKDIV(hfdcan->Init.ClockDivider)); + } + assert_param(IS_FDCAN_FRAME_FORMAT(hfdcan->Init.FrameFormat)); + assert_param(IS_FDCAN_MODE(hfdcan->Init.Mode)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.AutoRetransmission)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.TransmitPause)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.ProtocolException)); + assert_param(IS_FDCAN_NOMINAL_PRESCALER(hfdcan->Init.NominalPrescaler)); + assert_param(IS_FDCAN_NOMINAL_SJW(hfdcan->Init.NominalSyncJumpWidth)); + assert_param(IS_FDCAN_NOMINAL_TSEG1(hfdcan->Init.NominalTimeSeg1)); + assert_param(IS_FDCAN_NOMINAL_TSEG2(hfdcan->Init.NominalTimeSeg2)); + if (hfdcan->Init.FrameFormat == FDCAN_FRAME_FD_BRS) + { + assert_param(IS_FDCAN_DATA_PRESCALER(hfdcan->Init.DataPrescaler)); + assert_param(IS_FDCAN_DATA_SJW(hfdcan->Init.DataSyncJumpWidth)); + assert_param(IS_FDCAN_DATA_TSEG1(hfdcan->Init.DataTimeSeg1)); + assert_param(IS_FDCAN_DATA_TSEG2(hfdcan->Init.DataTimeSeg2)); + } + assert_param(IS_FDCAN_MAX_VALUE(hfdcan->Init.StdFiltersNbr, SRAMCAN_FLS_NBR)); + assert_param(IS_FDCAN_MAX_VALUE(hfdcan->Init.ExtFiltersNbr, SRAMCAN_FLE_NBR)); + assert_param(IS_FDCAN_TX_FIFO_QUEUE_MODE(hfdcan->Init.TxFifoQueueMode)); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hfdcan->Lock = HAL_UNLOCKED; + + /* Reset callbacks to legacy functions */ + hfdcan->TxEventFifoCallback = HAL_FDCAN_TxEventFifoCallback; /* Legacy weak TxEventFifoCallback */ + hfdcan->RxFifo0Callback = HAL_FDCAN_RxFifo0Callback; /* Legacy weak RxFifo0Callback */ + hfdcan->RxFifo1Callback = HAL_FDCAN_RxFifo1Callback; /* Legacy weak RxFifo1Callback */ + hfdcan->TxFifoEmptyCallback = HAL_FDCAN_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + hfdcan->TxBufferCompleteCallback = HAL_FDCAN_TxBufferCompleteCallback; /* Legacy weak TxBufferCompleteCallback */ + hfdcan->TxBufferAbortCallback = HAL_FDCAN_TxBufferAbortCallback; /* Legacy weak TxBufferAbortCallback */ + hfdcan->HighPriorityMessageCallback = HAL_FDCAN_HighPriorityMessageCallback; /* Legacy weak HighPriorityMessageCallback */ + hfdcan->TimestampWraparoundCallback = HAL_FDCAN_TimestampWraparoundCallback; /* Legacy weak TimestampWraparoundCallback */ + hfdcan->TimeoutOccurredCallback = HAL_FDCAN_TimeoutOccurredCallback; /* Legacy weak TimeoutOccurredCallback */ + hfdcan->ErrorCallback = HAL_FDCAN_ErrorCallback; /* Legacy weak ErrorCallback */ + hfdcan->ErrorStatusCallback = HAL_FDCAN_ErrorStatusCallback; /* Legacy weak ErrorStatusCallback */ + + if (hfdcan->MspInitCallback == NULL) + { + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware: CLOCK, NVIC */ + hfdcan->MspInitCallback(hfdcan); + } +#else + if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hfdcan->Lock = HAL_UNLOCKED; + + /* Init the low level hardware: CLOCK, NVIC */ + HAL_FDCAN_MspInit(hfdcan); + } +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + + /* Exit from Sleep mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check Sleep mode acknowledge */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Request initialisation */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until the INIT bit into CCCR register is set */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_INIT) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Enable configuration change */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CCE); + + /* Check FDCAN instance */ + if (hfdcan->Instance == FDCAN1) + { + /* Configure Clock divider */ + FDCAN_CONFIG->CKDIV = hfdcan->Init.ClockDivider; + } + + /* Set the no automatic retransmission */ + if (hfdcan->Init.AutoRetransmission == ENABLE) + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_DAR); + } + else + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_DAR); + } + + /* Set the transmit pause feature */ + if (hfdcan->Init.TransmitPause == ENABLE) + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TXP); + } + else + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TXP); + } + + /* Set the Protocol Exception Handling */ + if (hfdcan->Init.ProtocolException == ENABLE) + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_PXHD); + } + else + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_PXHD); + } + + /* Set FDCAN Frame Format */ + MODIFY_REG(hfdcan->Instance->CCCR, FDCAN_FRAME_FD_BRS, hfdcan->Init.FrameFormat); + + /* Reset FDCAN Operation Mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, (FDCAN_CCCR_TEST | FDCAN_CCCR_MON | FDCAN_CCCR_ASM)); + CLEAR_BIT(hfdcan->Instance->TEST, FDCAN_TEST_LBCK); + + /* Set FDCAN Operating Mode: + | Normal | Restricted | Bus | Internal | External + | | Operation | Monitoring | LoopBack | LoopBack + CCCR.TEST | 0 | 0 | 0 | 1 | 1 + CCCR.MON | 0 | 0 | 1 | 1 | 0 + TEST.LBCK | 0 | 0 | 0 | 1 | 1 + CCCR.ASM | 0 | 1 | 0 | 0 | 0 + */ + if (hfdcan->Init.Mode == FDCAN_MODE_RESTRICTED_OPERATION) + { + /* Enable Restricted Operation mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_ASM); + } + else if (hfdcan->Init.Mode != FDCAN_MODE_NORMAL) + { + if (hfdcan->Init.Mode != FDCAN_MODE_BUS_MONITORING) + { + /* Enable write access to TEST register */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TEST); + + /* Enable LoopBack mode */ + SET_BIT(hfdcan->Instance->TEST, FDCAN_TEST_LBCK); + + if (hfdcan->Init.Mode == FDCAN_MODE_INTERNAL_LOOPBACK) + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_MON); + } + } + else + { + /* Enable bus monitoring mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_MON); + } + } + else + { + /* Nothing to do: normal mode */ + } + + /* Set the nominal bit timing register */ + hfdcan->Instance->NBTP = ((((uint32_t)hfdcan->Init.NominalSyncJumpWidth - 1U) << FDCAN_NBTP_NSJW_Pos) | \ + (((uint32_t)hfdcan->Init.NominalTimeSeg1 - 1U) << FDCAN_NBTP_NTSEG1_Pos) | \ + (((uint32_t)hfdcan->Init.NominalTimeSeg2 - 1U) << FDCAN_NBTP_NTSEG2_Pos) | \ + (((uint32_t)hfdcan->Init.NominalPrescaler - 1U) << FDCAN_NBTP_NBRP_Pos)); + + /* If FD operation with BRS is selected, set the data bit timing register */ + if (hfdcan->Init.FrameFormat == FDCAN_FRAME_FD_BRS) + { + hfdcan->Instance->DBTP = ((((uint32_t)hfdcan->Init.DataSyncJumpWidth - 1U) << FDCAN_DBTP_DSJW_Pos) | \ + (((uint32_t)hfdcan->Init.DataTimeSeg1 - 1U) << FDCAN_DBTP_DTSEG1_Pos) | \ + (((uint32_t)hfdcan->Init.DataTimeSeg2 - 1U) << FDCAN_DBTP_DTSEG2_Pos) | \ + (((uint32_t)hfdcan->Init.DataPrescaler - 1U) << FDCAN_DBTP_DBRP_Pos)); + } + + /* Select between Tx FIFO and Tx Queue operation modes */ + SET_BIT(hfdcan->Instance->TXBC, hfdcan->Init.TxFifoQueueMode); + + /* Calculate each RAM block address */ + FDCAN_CalcultateRamBlockAddresses(hfdcan); + + /* Initialize the Latest Tx request buffer index */ + hfdcan->LatestTxFifoQRequest = 0U; + + /* Initialize the error code */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Initialize the FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitializes the FDCAN peripheral registers to their default reset values. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DeInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Check FDCAN handle */ + if (hfdcan == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_FDCAN_ALL_INSTANCE(hfdcan->Instance)); + + /* Stop the FDCAN module: return value is voluntary ignored */ + (void)HAL_FDCAN_Stop(hfdcan); + + /* Disable Interrupt lines */ + CLEAR_BIT(hfdcan->Instance->ILE, (FDCAN_INTERRUPT_LINE0 | FDCAN_INTERRUPT_LINE1)); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + if (hfdcan->MspDeInitCallback == NULL) + { + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: CLOCK, NVIC */ + hfdcan->MspDeInitCallback(hfdcan); +#else + /* DeInit the low level hardware: CLOCK, NVIC */ + HAL_FDCAN_MspDeInit(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + + /* Reset the FDCAN ErrorCode */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_RESET; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the FDCAN MSP. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the FDCAN MSP. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Enter FDCAN peripheral in sleep mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnterPowerDownMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Request clock stop */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FDCAN is ready for power down */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == 0U) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Exit power down mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ExitPowerDownMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Reset clock stop request */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FDCAN exits sleep mode */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Enter normal operation */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Return function status */ + return HAL_OK; +} + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/** + * @brief Register a FDCAN CallBack. + * To be used instead of the weak predefined callback + * @param hfdcan pointer to a FDCAN_HandleTypeDef structure that contains + * the configuration information for FDCAN module + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_FDCAN_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty callback ID + * @arg @ref HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID High priority message callback ID + * @arg @ref HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID Timestamp wraparound callback ID + * @arg @ref HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID Timeout occurred callback ID + * @arg @ref HAL_FDCAN_ERROR_CALLBACK_CB_ID Error callback ID + * @arg @ref HAL_FDCAN_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_FDCAN_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID, void (* pCallback)(FDCAN_HandleTypeDef *_hFDCAN)) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + switch (CallbackID) + { + case HAL_FDCAN_TX_FIFO_EMPTY_CB_ID : + hfdcan->TxFifoEmptyCallback = pCallback; + break; + + case HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID : + hfdcan->HighPriorityMessageCallback = pCallback; + break; + + case HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID : + hfdcan->TimestampWraparoundCallback = pCallback; + break; + + case HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID : + hfdcan->TimeoutOccurredCallback = pCallback; + break; + + case HAL_FDCAN_ERROR_CALLBACK_CB_ID : + hfdcan->ErrorCallback = pCallback; + break; + + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = pCallback; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + switch (CallbackID) + { + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = pCallback; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a FDCAN CallBack. + * FDCAN callback is redirected to the weak predefined callback + * @param hfdcan pointer to a FDCAN_HandleTypeDef structure that contains + * the configuration information for FDCAN module + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_FDCAN_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty callback ID + * @arg @ref HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID High priority message callback ID + * @arg @ref HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID Timestamp wraparound callback ID + * @arg @ref HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID Timeout occurred callback ID + * @arg @ref HAL_FDCAN_ERROR_CALLBACK_CB_ID Error callback ID + * @arg @ref HAL_FDCAN_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_FDCAN_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + switch (CallbackID) + { + case HAL_FDCAN_TX_FIFO_EMPTY_CB_ID : + hfdcan->TxFifoEmptyCallback = HAL_FDCAN_TxFifoEmptyCallback; + break; + + case HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID : + hfdcan->HighPriorityMessageCallback = HAL_FDCAN_HighPriorityMessageCallback; + break; + + case HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID : + hfdcan->TimestampWraparoundCallback = HAL_FDCAN_TimestampWraparoundCallback; + break; + + case HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID : + hfdcan->TimeoutOccurredCallback = HAL_FDCAN_TimeoutOccurredCallback; + break; + + case HAL_FDCAN_ERROR_CALLBACK_CB_ID : + hfdcan->ErrorCallback = HAL_FDCAN_ErrorCallback; + break; + + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + switch (CallbackID) + { + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Event Fifo FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxEventFifoCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Event Fifo Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxEventFifoCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxEventFifoCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Event Fifo FDCAN Callback + * Tx Event Fifo FDCAN Callback is redirected to the weak HAL_FDCAN_TxEventFifoCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxEventFifoCallback = HAL_FDCAN_TxEventFifoCallback; /* Legacy weak TxEventFifoCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Rx Fifo 0 FDCAN Callback + * To be used instead of the weak HAL_FDCAN_RxFifo0Callback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Rx Fifo 0 Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo0CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo0Callback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Rx Fifo 0 FDCAN Callback + * Rx Fifo 0 FDCAN Callback is redirected to the weak HAL_FDCAN_RxFifo0Callback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo0Callback = HAL_FDCAN_RxFifo0Callback; /* Legacy weak RxFifo0Callback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Rx Fifo 1 FDCAN Callback + * To be used instead of the weak HAL_FDCAN_RxFifo1Callback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Rx Fifo 1 Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo1CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo1Callback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Rx Fifo 1 FDCAN Callback + * Rx Fifo 1 FDCAN Callback is redirected to the weak HAL_FDCAN_RxFifo1Callback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo1Callback = HAL_FDCAN_RxFifo1Callback; /* Legacy weak RxFifo1Callback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Buffer Complete FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxBufferCompleteCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Buffer Complete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferCompleteCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferCompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Buffer Complete FDCAN Callback + * Tx Buffer Complete FDCAN Callback is redirected to the weak HAL_FDCAN_TxBufferCompleteCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferCompleteCallback = HAL_FDCAN_TxBufferCompleteCallback; /* Legacy weak TxBufferCompleteCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Buffer Abort FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxBufferAbortCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Buffer Abort Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferAbortCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferAbortCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Buffer Abort FDCAN Callback + * Tx Buffer Abort FDCAN Callback is redirected to the weak HAL_FDCAN_TxBufferAbortCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferAbortCallback = HAL_FDCAN_TxBufferAbortCallback; /* Legacy weak TxBufferAbortCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Error Status FDCAN Callback + * To be used instead of the weak HAL_FDCAN_ErrorStatusCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Error Status Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_ErrorStatusCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->ErrorStatusCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Error Status FDCAN Callback + * Error Status FDCAN Callback is redirected to the weak HAL_FDCAN_ErrorStatusCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->ErrorStatusCallback = HAL_FDCAN_ErrorStatusCallback; /* Legacy weak ErrorStatusCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group2 Configuration functions + * @brief FDCAN Configuration functions. + * +@verbatim + ============================================================================== + ##### Configuration functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_ConfigFilter : Configure the FDCAN reception filters + (+) HAL_FDCAN_ConfigGlobalFilter : Configure the FDCAN global filter + (+) HAL_FDCAN_ConfigExtendedIdMask : Configure the extended ID mask + (+) HAL_FDCAN_ConfigRxFifoOverwrite : Configure the Rx FIFO operation mode + (+) HAL_FDCAN_ConfigRamWatchdog : Configure the RAM watchdog + (+) HAL_FDCAN_ConfigTimestampCounter : Configure the timestamp counter + (+) HAL_FDCAN_EnableTimestampCounter : Enable the timestamp counter + (+) HAL_FDCAN_DisableTimestampCounter : Disable the timestamp counter + (+) HAL_FDCAN_GetTimestampCounter : Get the timestamp counter value + (+) HAL_FDCAN_ResetTimestampCounter : Reset the timestamp counter to zero + (+) HAL_FDCAN_ConfigTimeoutCounter : Configure the timeout counter + (+) HAL_FDCAN_EnableTimeoutCounter : Enable the timeout counter + (+) HAL_FDCAN_DisableTimeoutCounter : Disable the timeout counter + (+) HAL_FDCAN_GetTimeoutCounter : Get the timeout counter value + (+) HAL_FDCAN_ResetTimeoutCounter : Reset the timeout counter to its start value + (+) HAL_FDCAN_ConfigTxDelayCompensation : Configure the transmitter delay compensation + (+) HAL_FDCAN_EnableTxDelayCompensation : Enable the transmitter delay compensation + (+) HAL_FDCAN_DisableTxDelayCompensation : Disable the transmitter delay compensation + (+) HAL_FDCAN_EnableISOMode : Enable ISO 11898-1 protocol mode + (+) HAL_FDCAN_DisableISOMode : Disable ISO 11898-1 protocol mode + (+) HAL_FDCAN_EnableEdgeFiltering : Enable edge filtering during bus integration + (+) HAL_FDCAN_DisableEdgeFiltering : Disable edge filtering during bus integration + +@endverbatim + * @{ + */ + +/** + * @brief Configure the FDCAN reception filter according to the specified + * parameters in the FDCAN_FilterTypeDef structure. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param sFilterConfig pointer to an FDCAN_FilterTypeDef structure that + * contains the filter configuration information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigFilter(FDCAN_HandleTypeDef *hfdcan, FDCAN_FilterTypeDef *sFilterConfig) +{ + uint32_t FilterElementW1; + uint32_t FilterElementW2; + uint32_t *FilterAddress; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Check function parameters */ + assert_param(IS_FDCAN_ID_TYPE(sFilterConfig->IdType)); + assert_param(IS_FDCAN_FILTER_CFG(sFilterConfig->FilterConfig)); + + if (sFilterConfig->IdType == FDCAN_STANDARD_ID) + { + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterIndex, (hfdcan->Init.StdFiltersNbr - 1U))); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID1, 0x7FFU)); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID2, 0x7FFU)); + assert_param(IS_FDCAN_STD_FILTER_TYPE(sFilterConfig->FilterType)); + + /* Build filter element */ + FilterElementW1 = ((sFilterConfig->FilterType << 30U) | + (sFilterConfig->FilterConfig << 27U) | + (sFilterConfig->FilterID1 << 16U) | + sFilterConfig->FilterID2); + + /* Calculate filter address */ + FilterAddress = (uint32_t *)(hfdcan->msgRam.StandardFilterSA + (sFilterConfig->FilterIndex * SRAMCAN_FLS_SIZE)); + + /* Write filter element to the message RAM */ + *FilterAddress = FilterElementW1; + } + else /* sFilterConfig->IdType == FDCAN_EXTENDED_ID */ + { + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterIndex, (hfdcan->Init.ExtFiltersNbr - 1U))); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID1, 0x1FFFFFFFU)); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID2, 0x1FFFFFFFU)); + assert_param(IS_FDCAN_EXT_FILTER_TYPE(sFilterConfig->FilterType)); + + /* Build first word of filter element */ + FilterElementW1 = ((sFilterConfig->FilterConfig << 29U) | sFilterConfig->FilterID1); + + /* Build second word of filter element */ + FilterElementW2 = ((sFilterConfig->FilterType << 30U) | sFilterConfig->FilterID2); + + /* Calculate filter address */ + FilterAddress = (uint32_t *)(hfdcan->msgRam.ExtendedFilterSA + (sFilterConfig->FilterIndex * SRAMCAN_FLE_SIZE)); + + /* Write filter element to the message RAM */ + *FilterAddress = FilterElementW1; + FilterAddress++; + *FilterAddress = FilterElementW2; + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the FDCAN global filter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param NonMatchingStd Defines how received messages with 11-bit IDs that + * do not match any element of the filter list are treated. + * This parameter can be a value of @arg FDCAN_Non_Matching_Frames. + * @param NonMatchingExt Defines how received messages with 29-bit IDs that + * do not match any element of the filter list are treated. + * This parameter can be a value of @arg FDCAN_Non_Matching_Frames. + * @param RejectRemoteStd Filter or reject all the remote 11-bit IDs frames. + * This parameter can be a value of @arg FDCAN_Reject_Remote_Frames. + * @param RejectRemoteExt Filter or reject all the remote 29-bit IDs frames. + * This parameter can be a value of @arg FDCAN_Reject_Remote_Frames. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigGlobalFilter(FDCAN_HandleTypeDef *hfdcan, + uint32_t NonMatchingStd, + uint32_t NonMatchingExt, + uint32_t RejectRemoteStd, + uint32_t RejectRemoteExt) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_NON_MATCHING(NonMatchingStd)); + assert_param(IS_FDCAN_NON_MATCHING(NonMatchingExt)); + assert_param(IS_FDCAN_REJECT_REMOTE(RejectRemoteStd)); + assert_param(IS_FDCAN_REJECT_REMOTE(RejectRemoteExt)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure global filter */ + MODIFY_REG(hfdcan->Instance->RXGFC, (FDCAN_RXGFC_ANFS | + FDCAN_RXGFC_ANFE | + FDCAN_RXGFC_RRFS | + FDCAN_RXGFC_RRFE), + ((NonMatchingStd << FDCAN_RXGFC_ANFS_Pos) | + (NonMatchingExt << FDCAN_RXGFC_ANFE_Pos) | + (RejectRemoteStd << FDCAN_RXGFC_RRFS_Pos) | + (RejectRemoteExt << FDCAN_RXGFC_RRFE_Pos))); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the extended ID mask. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param Mask Extended ID Mask. + This parameter must be a number between 0 and 0x1FFFFFFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigExtendedIdMask(FDCAN_HandleTypeDef *hfdcan, uint32_t Mask) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(Mask, 0x1FFFFFFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure the extended ID mask */ + hfdcan->Instance->XIDAM = Mask; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the Rx FIFO operation mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo Rx FIFO. + * This parameter can be one of the following values: + * @arg FDCAN_RX_FIFO0: Rx FIFO 0 + * @arg FDCAN_RX_FIFO1: Rx FIFO 1 + * @param OperationMode operation mode. + * This parameter can be a value of @arg FDCAN_Rx_FIFO_operation_mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigRxFifoOverwrite(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo, uint32_t OperationMode) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxFifo)); + assert_param(IS_FDCAN_RX_FIFO_MODE(OperationMode)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + if (RxFifo == FDCAN_RX_FIFO0) + { + /* Select FIFO 0 Operation Mode */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_F0OM, (OperationMode << FDCAN_RXGFC_F0OM_Pos)); + } + else /* RxFifo == FDCAN_RX_FIFO1 */ + { + /* Select FIFO 1 Operation Mode */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_F1OM, (OperationMode << FDCAN_RXGFC_F1OM_Pos)); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the RAM watchdog. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param CounterStartValue Start value of the Message RAM Watchdog Counter, + * This parameter must be a number between 0x00 and 0xFF, + * with the reset value of 0x00 the counter is disabled. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigRamWatchdog(FDCAN_HandleTypeDef *hfdcan, uint32_t CounterStartValue) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(CounterStartValue, 0xFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure the RAM watchdog counter start value */ + MODIFY_REG(hfdcan->Instance->RWD, FDCAN_RWD_WDC, CounterStartValue); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimestampPrescaler Timestamp Counter Prescaler. + * This parameter can be a value of @arg FDCAN_Timestamp_Prescaler. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampPrescaler) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMESTAMP_PRESCALER(TimestampPrescaler)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure prescaler */ + MODIFY_REG(hfdcan->Instance->TSCC, FDCAN_TSCC_TCP, TimestampPrescaler); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimestampOperation Timestamp counter operation. + * This parameter can be a value of @arg FDCAN_Timestamp. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampOperation) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMESTAMP(TimestampOperation)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable timestamp counter */ + MODIFY_REG(hfdcan->Instance->TSCC, FDCAN_TSCC_TSS, TimestampOperation); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable timestamp counter */ + CLEAR_BIT(hfdcan->Instance->TSCC, FDCAN_TSCC_TSS); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Get the timestamp counter value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Timestamp counter value + */ +uint16_t HAL_FDCAN_GetTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + return (uint16_t)(hfdcan->Instance->TSCV); +} + +/** + * @brief Reset the timestamp counter to zero. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ResetTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if ((hfdcan->Instance->TSCC & FDCAN_TSCC_TSS) != FDCAN_TIMESTAMP_EXTERNAL) + { + /* Reset timestamp counter. + Actually any write operation to TSCV clears the counter */ + CLEAR_REG(hfdcan->Instance->TSCV); + } + else + { + /* Update error code. + Unable to reset external counter */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_SUPPORTED; + + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimeoutOperation Timeout counter operation. + * This parameter can be a value of @arg FDCAN_Timeout_Operation. + * @param TimeoutPeriod Start value of the timeout down-counter. + * This parameter must be a number between 0x0000 and 0xFFFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTimeoutCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimeoutOperation, uint32_t TimeoutPeriod) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMEOUT(TimeoutOperation)); + assert_param(IS_FDCAN_MAX_VALUE(TimeoutPeriod, 0xFFFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Select timeout operation and configure period */ + MODIFY_REG(hfdcan->Instance->TOCC, (FDCAN_TOCC_TOS | FDCAN_TOCC_TOP), (TimeoutOperation | (TimeoutPeriod << FDCAN_TOCC_TOP_Pos))); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable timeout counter */ + SET_BIT(hfdcan->Instance->TOCC, FDCAN_TOCC_ETOC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable timeout counter */ + CLEAR_BIT(hfdcan->Instance->TOCC, FDCAN_TOCC_ETOC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Get the timeout counter value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Timeout counter value + */ +uint16_t HAL_FDCAN_GetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + return (uint16_t)(hfdcan->Instance->TOCV); +} + +/** + * @brief Reset the timeout counter to its start value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ResetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if ((hfdcan->Instance->TOCC & FDCAN_TOCC_TOS) == FDCAN_TIMEOUT_CONTINUOUS) + { + /* Reset timeout counter to start value */ + CLEAR_REG(hfdcan->Instance->TOCV); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code. + Unable to reset counter: controlled only by FIFO empty state */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_SUPPORTED; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TdcOffset Transmitter Delay Compensation Offset. + * This parameter must be a number between 0x00 and 0x7F. + * @param TdcFilter Transmitter Delay Compensation Filter Window Length. + * This parameter must be a number between 0x00 and 0x7F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan, uint32_t TdcOffset, uint32_t TdcFilter) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(TdcOffset, 0x7FU)); + assert_param(IS_FDCAN_MAX_VALUE(TdcFilter, 0x7FU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure TDC offset and filter window */ + hfdcan->Instance->TDCR = ((TdcFilter << FDCAN_TDCR_TDCF_Pos) | (TdcOffset << FDCAN_TDCR_TDCO_Pos)); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable transmitter delay compensation */ + SET_BIT(hfdcan->Instance->DBTP, FDCAN_DBTP_TDC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable transmitter delay compensation */ + CLEAR_BIT(hfdcan->Instance->DBTP, FDCAN_DBTP_TDC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable ISO 11898-1 protocol mode. + * CAN FD frame format is according to ISO 11898-1 standard. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableISOMode(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable Non ISO protocol mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_NISO); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable ISO 11898-1 protocol mode. + * CAN FD frame format is according to Bosch CAN FD specification V1.0. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableISOMode(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable Non ISO protocol mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_NISO); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable edge filtering during bus integration. + * Two consecutive dominant tq are required to detect an edge for hard synchronization. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable edge filtering */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_EFBI); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable edge filtering during bus integration. + * One dominant tq is required to detect an edge for hard synchronization. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable edge filtering */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_EFBI); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group3 Control functions + * @brief Control functions + * +@verbatim + ============================================================================== + ##### Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_Start : Start the FDCAN module + (+) HAL_FDCAN_Stop : Stop the FDCAN module and enable access to configuration registers + (+) HAL_FDCAN_AddMessageToTxFifoQ : Add a message to the Tx FIFO/Queue and activate the corresponding transmission request + (+) HAL_FDCAN_GetLatestTxFifoQRequestBuffer : Get Tx buffer index of latest Tx FIFO/Queue request + (+) HAL_FDCAN_AbortTxRequest : Abort transmission request + (+) HAL_FDCAN_GetRxMessage : Get an FDCAN frame from the Rx FIFO zone into the message RAM + (+) HAL_FDCAN_GetTxEvent : Get an FDCAN Tx event from the Tx Event FIFO zone into the message RAM + (+) HAL_FDCAN_GetHighPriorityMessageStatus : Get high priority message status + (+) HAL_FDCAN_GetProtocolStatus : Get protocol status + (+) HAL_FDCAN_GetErrorCounters : Get error counter values + (+) HAL_FDCAN_IsTxBufferMessagePending : Check if a transmission request is pending on the selected Tx buffer + (+) HAL_FDCAN_GetRxFifoFillLevel : Return Rx FIFO fill level + (+) HAL_FDCAN_GetTxFifoFreeLevel : Return Tx FIFO free level + (+) HAL_FDCAN_IsRestrictedOperationMode : Check if the FDCAN peripheral entered Restricted Operation Mode + (+) HAL_FDCAN_ExitRestrictedOperationMode : Exit Restricted Operation Mode + +@endverbatim + * @{ + */ + +/** + * @brief Start the FDCAN module. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Start(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Change FDCAN peripheral state */ + hfdcan->State = HAL_FDCAN_STATE_BUSY; + + /* Request leave initialisation */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Reset the FDCAN ErrorCode */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Stop the FDCAN module and enable access to configuration registers. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Stop(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t Counter = 0U; + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Request initialisation */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Wait until the INIT bit into CCCR register is set */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_INIT) == 0U) + { + /* Check for the Timeout */ + if (Counter > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + + /* Increment counter */ + Counter++; + } + + /* Reset counter */ + Counter = 0U; + + /* Exit from Sleep mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Wait until FDCAN exits sleep mode */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + /* Check for the Timeout */ + if (Counter > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + + /* Increment counter */ + Counter++; + } + + /* Enable configuration change */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CCE); + + /* Reset Latest Tx FIFO/Queue Request Buffer Index */ + hfdcan->LatestTxFifoQRequest = 0U; + + /* Change FDCAN peripheral state */ + hfdcan->State = HAL_FDCAN_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Add a message to the Tx FIFO/Queue and activate the corresponding transmission request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxHeader pointer to a FDCAN_TxHeaderTypeDef structure. + * @param pTxData pointer to a buffer containing the payload of the Tx frame. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_AddMessageToTxFifoQ(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData) +{ + uint32_t PutIndex; + + /* Check function parameters */ + assert_param(IS_FDCAN_ID_TYPE(pTxHeader->IdType)); + if (pTxHeader->IdType == FDCAN_STANDARD_ID) + { + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->Identifier, 0x7FFU)); + } + else /* pTxHeader->IdType == FDCAN_EXTENDED_ID */ + { + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->Identifier, 0x1FFFFFFFU)); + } + assert_param(IS_FDCAN_FRAME_TYPE(pTxHeader->TxFrameType)); + assert_param(IS_FDCAN_DLC(pTxHeader->DataLength)); + assert_param(IS_FDCAN_ESI(pTxHeader->ErrorStateIndicator)); + assert_param(IS_FDCAN_BRS(pTxHeader->BitRateSwitch)); + assert_param(IS_FDCAN_FDF(pTxHeader->FDFormat)); + assert_param(IS_FDCAN_EFC(pTxHeader->TxEventFifoControl)); + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->MessageMarker, 0xFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Check that the Tx FIFO/Queue is not full */ + if ((hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFQF) != 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_FULL; + + return HAL_ERROR; + } + else + { + /* Retrieve the Tx FIFO PutIndex */ + PutIndex = ((hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFQPI) >> FDCAN_TXFQS_TFQPI_Pos); + + /* Add the message to the Tx FIFO/Queue */ + FDCAN_CopyMessageToRAM(hfdcan, pTxHeader, pTxData, PutIndex); + + /* Activate the corresponding transmission request */ + hfdcan->Instance->TXBAR = ((uint32_t)1 << PutIndex); + + /* Store the Latest Tx FIFO/Queue Request Buffer Index */ + hfdcan->LatestTxFifoQRequest = ((uint32_t)1 << PutIndex); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get Tx buffer index of latest Tx FIFO/Queue request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Tx buffer index of last Tx FIFO/Queue request + * - Any value of @arg FDCAN_Tx_location if Tx request has been submitted. + * - 0 if no Tx FIFO/Queue request have been submitted. + */ +uint32_t HAL_FDCAN_GetLatestTxFifoQRequestBuffer(FDCAN_HandleTypeDef *hfdcan) +{ + /* Return Last Tx FIFO/Queue Request Buffer */ + return hfdcan->LatestTxFifoQRequest; +} + +/** + * @brief Abort transmission request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndex buffer index. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_AbortTxRequest(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndex) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TX_LOCATION_LIST(BufferIndex)); + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Add cancellation request */ + hfdcan->Instance->TXBCR = BufferIndex; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get an FDCAN frame from the Rx FIFO zone into the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxLocation Location of the received message to be read. + * This parameter can be a value of @arg FDCAN_Rx_location. + * @param pRxHeader pointer to a FDCAN_RxHeaderTypeDef structure. + * @param pRxData pointer to a buffer where the payload of the Rx frame will be stored. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetRxMessage(FDCAN_HandleTypeDef *hfdcan, uint32_t RxLocation, FDCAN_RxHeaderTypeDef *pRxHeader, uint8_t *pRxData) +{ + uint32_t *RxAddress; + uint8_t *pData; + uint32_t ByteCounter; + uint32_t GetIndex; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxLocation)); + + if (state == HAL_FDCAN_STATE_BUSY) + { + if (RxLocation == FDCAN_RX_FIFO0) /* Rx element is assigned to the Rx FIFO 0 */ + { + /* Check that the Rx FIFO 0 is not empty */ + if ((hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0FL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + else + { + /* Calculate Rx FIFO 0 element address */ + GetIndex = ((hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0GI) >> FDCAN_RXF0S_F0GI_Pos); + RxAddress = (uint32_t *)(hfdcan->msgRam.RxFIFO0SA + (GetIndex * SRAMCAN_RF0_SIZE)); + } + } + else /* Rx element is assigned to the Rx FIFO 1 */ + { + /* Check that the Rx FIFO 1 is not empty */ + if ((hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1FL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + else + { + /* Calculate Rx FIFO 1 element address */ + GetIndex = ((hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1GI) >> FDCAN_RXF1S_F1GI_Pos); + RxAddress = (uint32_t *)(hfdcan->msgRam.RxFIFO1SA + (GetIndex * SRAMCAN_RF1_SIZE)); + } + } + + /* Retrieve IdType */ + pRxHeader->IdType = *RxAddress & FDCAN_ELEMENT_MASK_XTD; + + /* Retrieve Identifier */ + if (pRxHeader->IdType == FDCAN_STANDARD_ID) /* Standard ID element */ + { + pRxHeader->Identifier = ((*RxAddress & FDCAN_ELEMENT_MASK_STDID) >> 18U); + } + else /* Extended ID element */ + { + pRxHeader->Identifier = (*RxAddress & FDCAN_ELEMENT_MASK_EXTID); + } + + /* Retrieve RxFrameType */ + pRxHeader->RxFrameType = (*RxAddress & FDCAN_ELEMENT_MASK_RTR); + + /* Retrieve ErrorStateIndicator */ + pRxHeader->ErrorStateIndicator = (*RxAddress & FDCAN_ELEMENT_MASK_ESI); + + /* Increment RxAddress pointer to second word of Rx FIFO element */ + RxAddress++; + + /* Retrieve RxTimestamp */ + pRxHeader->RxTimestamp = (*RxAddress & FDCAN_ELEMENT_MASK_TS); + + /* Retrieve DataLength */ + pRxHeader->DataLength = (*RxAddress & FDCAN_ELEMENT_MASK_DLC); + + /* Retrieve BitRateSwitch */ + pRxHeader->BitRateSwitch = (*RxAddress & FDCAN_ELEMENT_MASK_BRS); + + /* Retrieve FDFormat */ + pRxHeader->FDFormat = (*RxAddress & FDCAN_ELEMENT_MASK_FDF); + + /* Retrieve FilterIndex */ + pRxHeader->FilterIndex = ((*RxAddress & FDCAN_ELEMENT_MASK_FIDX) >> 24U); + + /* Retrieve NonMatchingFrame */ + pRxHeader->IsFilterMatchingFrame = ((*RxAddress & FDCAN_ELEMENT_MASK_ANMF) >> 31U); + + /* Increment RxAddress pointer to payload of Rx FIFO element */ + RxAddress++; + + /* Retrieve Rx payload */ + pData = (uint8_t *)RxAddress; + for (ByteCounter = 0; ByteCounter < DLCtoBytes[pRxHeader->DataLength >> 16U]; ByteCounter++) + { + pRxData[ByteCounter] = pData[ByteCounter]; + } + + if (RxLocation == FDCAN_RX_FIFO0) /* Rx element is assigned to the Rx FIFO 0 */ + { + /* Acknowledge the Rx FIFO 0 that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->RXF0A = GetIndex; + } + else /* Rx element is assigned to the Rx FIFO 1 */ + { + /* Acknowledge the Rx FIFO 1 that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->RXF1A = GetIndex; + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get an FDCAN Tx event from the Tx Event FIFO zone into the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxEvent pointer to a FDCAN_TxEventFifoTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetTxEvent(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxEventFifoTypeDef *pTxEvent) +{ + uint32_t *TxEventAddress; + uint32_t GetIndex; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if (state == HAL_FDCAN_STATE_BUSY) + { + /* Check that the Tx event FIFO is not empty */ + if ((hfdcan->Instance->TXEFS & FDCAN_TXEFS_EFFL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + + /* Calculate Tx event FIFO element address */ + GetIndex = ((hfdcan->Instance->TXEFS & FDCAN_TXEFS_EFGI) >> FDCAN_TXEFS_EFGI_Pos); + TxEventAddress = (uint32_t *)(hfdcan->msgRam.TxEventFIFOSA + (GetIndex * SRAMCAN_TEF_SIZE)); + + /* Retrieve IdType */ + pTxEvent->IdType = *TxEventAddress & FDCAN_ELEMENT_MASK_XTD; + + /* Retrieve Identifier */ + if (pTxEvent->IdType == FDCAN_STANDARD_ID) /* Standard ID element */ + { + pTxEvent->Identifier = ((*TxEventAddress & FDCAN_ELEMENT_MASK_STDID) >> 18U); + } + else /* Extended ID element */ + { + pTxEvent->Identifier = (*TxEventAddress & FDCAN_ELEMENT_MASK_EXTID); + } + + /* Retrieve TxFrameType */ + pTxEvent->TxFrameType = (*TxEventAddress & FDCAN_ELEMENT_MASK_RTR); + + /* Retrieve ErrorStateIndicator */ + pTxEvent->ErrorStateIndicator = (*TxEventAddress & FDCAN_ELEMENT_MASK_ESI); + + /* Increment TxEventAddress pointer to second word of Tx Event FIFO element */ + TxEventAddress++; + + /* Retrieve TxTimestamp */ + pTxEvent->TxTimestamp = (*TxEventAddress & FDCAN_ELEMENT_MASK_TS); + + /* Retrieve DataLength */ + pTxEvent->DataLength = (*TxEventAddress & FDCAN_ELEMENT_MASK_DLC); + + /* Retrieve BitRateSwitch */ + pTxEvent->BitRateSwitch = (*TxEventAddress & FDCAN_ELEMENT_MASK_BRS); + + /* Retrieve FDFormat */ + pTxEvent->FDFormat = (*TxEventAddress & FDCAN_ELEMENT_MASK_FDF); + + /* Retrieve EventType */ + pTxEvent->EventType = (*TxEventAddress & FDCAN_ELEMENT_MASK_ET); + + /* Retrieve MessageMarker */ + pTxEvent->MessageMarker = ((*TxEventAddress & FDCAN_ELEMENT_MASK_MM) >> 24U); + + /* Acknowledge the Tx Event FIFO that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->TXEFA = GetIndex; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get high priority message status. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param HpMsgStatus pointer to an FDCAN_HpMsgStatusTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetHighPriorityMessageStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_HpMsgStatusTypeDef *HpMsgStatus) +{ + HpMsgStatus->FilterList = ((hfdcan->Instance->HPMS & FDCAN_HPMS_FLST) >> FDCAN_HPMS_FLST_Pos); + HpMsgStatus->FilterIndex = ((hfdcan->Instance->HPMS & FDCAN_HPMS_FIDX) >> FDCAN_HPMS_FIDX_Pos); + HpMsgStatus->MessageStorage = (hfdcan->Instance->HPMS & FDCAN_HPMS_MSI); + HpMsgStatus->MessageIndex = (hfdcan->Instance->HPMS & FDCAN_HPMS_BIDX); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get protocol status. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ProtocolStatus pointer to an FDCAN_ProtocolStatusTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetProtocolStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_ProtocolStatusTypeDef *ProtocolStatus) +{ + uint32_t StatusReg; + + /* Read the protocol status register */ + StatusReg = READ_REG(hfdcan->Instance->PSR); + + /* Fill the protocol status structure */ + ProtocolStatus->LastErrorCode = (StatusReg & FDCAN_PSR_LEC); + ProtocolStatus->DataLastErrorCode = ((StatusReg & FDCAN_PSR_DLEC) >> FDCAN_PSR_DLEC_Pos); + ProtocolStatus->Activity = (StatusReg & FDCAN_PSR_ACT); + ProtocolStatus->ErrorPassive = ((StatusReg & FDCAN_PSR_EP) >> FDCAN_PSR_EP_Pos); + ProtocolStatus->Warning = ((StatusReg & FDCAN_PSR_EW) >> FDCAN_PSR_EW_Pos); + ProtocolStatus->BusOff = ((StatusReg & FDCAN_PSR_BO) >> FDCAN_PSR_BO_Pos); + ProtocolStatus->RxESIflag = ((StatusReg & FDCAN_PSR_RESI) >> FDCAN_PSR_RESI_Pos); + ProtocolStatus->RxBRSflag = ((StatusReg & FDCAN_PSR_RBRS) >> FDCAN_PSR_RBRS_Pos); + ProtocolStatus->RxFDFflag = ((StatusReg & FDCAN_PSR_REDL) >> FDCAN_PSR_REDL_Pos); + ProtocolStatus->ProtocolException = ((StatusReg & FDCAN_PSR_PXE) >> FDCAN_PSR_PXE_Pos); + ProtocolStatus->TDCvalue = ((StatusReg & FDCAN_PSR_TDCV) >> FDCAN_PSR_TDCV_Pos); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get error counter values. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ErrorCounters pointer to an FDCAN_ErrorCountersTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetErrorCounters(FDCAN_HandleTypeDef *hfdcan, FDCAN_ErrorCountersTypeDef *ErrorCounters) +{ + uint32_t CountersReg; + + /* Read the error counters register */ + CountersReg = READ_REG(hfdcan->Instance->ECR); + + /* Fill the error counters structure */ + ErrorCounters->TxErrorCnt = ((CountersReg & FDCAN_ECR_TEC) >> FDCAN_ECR_TEC_Pos); + ErrorCounters->RxErrorCnt = ((CountersReg & FDCAN_ECR_REC) >> FDCAN_ECR_REC_Pos); + ErrorCounters->RxErrorPassive = ((CountersReg & FDCAN_ECR_RP) >> FDCAN_ECR_RP_Pos); + ErrorCounters->ErrorLogging = ((CountersReg & FDCAN_ECR_CEL) >> FDCAN_ECR_CEL_Pos); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Check if a transmission request is pending on the selected Tx buffer. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TxBufferIndex Tx buffer index. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval Status + * - 0 : No pending transmission request on TxBufferIndex list + * - 1 : Pending transmission request on TxBufferIndex. + */ +uint32_t HAL_FDCAN_IsTxBufferMessagePending(FDCAN_HandleTypeDef *hfdcan, uint32_t TxBufferIndex) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TX_LOCATION_LIST(TxBufferIndex)); + + /* Check pending transmission request on the selected buffer */ + if ((hfdcan->Instance->TXBRP & TxBufferIndex) == 0U) + { + return 0; + } + return 1; +} + +/** + * @brief Return Rx FIFO fill level. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo Rx FIFO. + * This parameter can be one of the following values: + * @arg FDCAN_RX_FIFO0: Rx FIFO 0 + * @arg FDCAN_RX_FIFO1: Rx FIFO 1 + * @retval Rx FIFO fill level. + */ +uint32_t HAL_FDCAN_GetRxFifoFillLevel(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo) +{ + uint32_t FillLevel; + + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxFifo)); + + if (RxFifo == FDCAN_RX_FIFO0) + { + FillLevel = hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0FL; + } + else /* RxFifo == FDCAN_RX_FIFO1 */ + { + FillLevel = hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1FL; + } + + /* Return Rx FIFO fill level */ + return FillLevel; +} + +/** + * @brief Return Tx FIFO free level: number of consecutive free Tx FIFO + * elements starting from Tx FIFO GetIndex. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Tx FIFO free level. + */ +uint32_t HAL_FDCAN_GetTxFifoFreeLevel(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t FreeLevel; + + FreeLevel = hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFFL; + + /* Return Tx FIFO free level */ + return FreeLevel; +} + +/** + * @brief Check if the FDCAN peripheral entered Restricted Operation Mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Status + * - 0 : Normal FDCAN operation. + * - 1 : Restricted Operation Mode active. + */ +uint32_t HAL_FDCAN_IsRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t OperationMode; + + /* Get Operation Mode */ + OperationMode = ((hfdcan->Instance->CCCR & FDCAN_CCCR_ASM) >> FDCAN_CCCR_ASM_Pos); + + return OperationMode; +} + +/** + * @brief Exit Restricted Operation Mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ExitRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Exit Restricted Operation mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_ASM); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group4 Interrupts management + * @brief Interrupts management + * +@verbatim + ============================================================================== + ##### Interrupts management ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_ConfigInterruptLines : Assign interrupts to either Interrupt line 0 or 1 + (+) HAL_FDCAN_ActivateNotification : Enable interrupts + (+) HAL_FDCAN_DeactivateNotification : Disable interrupts + (+) HAL_FDCAN_IRQHandler : Handles FDCAN interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Assign interrupts to either Interrupt line 0 or 1. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ITList indicates which interrupts group will be assigned to the selected interrupt line. + * This parameter can be any combination of @arg FDCAN_Interrupts_Group. + * @param InterruptLine Interrupt line. + * This parameter can be a value of @arg FDCAN_Interrupt_Line. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigInterruptLines(FDCAN_HandleTypeDef *hfdcan, uint32_t ITList, uint32_t InterruptLine) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT_GROUP(ITList)); + assert_param(IS_FDCAN_IT_LINE(InterruptLine)); + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Assign list of interrupts to the selected line */ + if (InterruptLine == FDCAN_INTERRUPT_LINE0) + { + CLEAR_BIT(hfdcan->Instance->ILS, ITList); + } + else /* InterruptLine == FDCAN_INTERRUPT_LINE1 */ + { + SET_BIT(hfdcan->Instance->ILS, ITList); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Enable interrupts. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ActiveITs indicates which interrupts will be enabled. + * This parameter can be any combination of @arg FDCAN_Interrupts. + * @param BufferIndexes Tx Buffer Indexes. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * This parameter is ignored if ActiveITs does not include one of the following: + * - FDCAN_IT_TX_COMPLETE + * - FDCAN_IT_TX_ABORT_COMPLETE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ActivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t ActiveITs, uint32_t BufferIndexes) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + uint32_t ITs_lines_selection; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT(ActiveITs)); + if ((ActiveITs & (FDCAN_IT_TX_COMPLETE | FDCAN_IT_TX_ABORT_COMPLETE)) != 0U) + { + assert_param(IS_FDCAN_TX_LOCATION_LIST(BufferIndexes)); + } + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Get interrupts line selection */ + ITs_lines_selection = hfdcan->Instance->ILS; + + /* Enable Interrupt lines */ + if ((((ActiveITs & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) == 0U))) + { + /* Enable Interrupt line 0 */ + SET_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE0); + } + if ((((ActiveITs & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) != 0U))) + { + /* Enable Interrupt line 1 */ + SET_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE1); + } + + if ((ActiveITs & FDCAN_IT_TX_COMPLETE) != 0U) + { + /* Enable Tx Buffer Transmission Interrupt to set TC flag in IR register, + but interrupt will only occur if TC is enabled in IE register */ + SET_BIT(hfdcan->Instance->TXBTIE, BufferIndexes); + } + + if ((ActiveITs & FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* Enable Tx Buffer Cancellation Finished Interrupt to set TCF flag in IR register, + but interrupt will only occur if TCF is enabled in IE register */ + SET_BIT(hfdcan->Instance->TXBCIE, BufferIndexes); + } + + /* Enable the selected interrupts */ + __HAL_FDCAN_ENABLE_IT(hfdcan, ActiveITs); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Disable interrupts. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param InactiveITs indicates which interrupts will be disabled. + * This parameter can be any combination of @arg FDCAN_Interrupts. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DeactivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t InactiveITs) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + uint32_t ITs_enabled; + uint32_t ITs_lines_selection; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT(InactiveITs)); + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Disable the selected interrupts */ + __HAL_FDCAN_DISABLE_IT(hfdcan, InactiveITs); + + if ((InactiveITs & FDCAN_IT_TX_COMPLETE) != 0U) + { + /* Disable Tx Buffer Transmission Interrupts */ + CLEAR_REG(hfdcan->Instance->TXBTIE); + } + + if ((InactiveITs & FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* Disable Tx Buffer Cancellation Finished Interrupt */ + CLEAR_REG(hfdcan->Instance->TXBCIE); + } + + /* Get interrupts enabled and interrupts line selection */ + ITs_enabled = hfdcan->Instance->IE; + ITs_lines_selection = hfdcan->Instance->ILS; + + /* Check if some interrupts are still enabled on interrupt line 0 */ + if ((((ITs_enabled & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) == 0U))) + { + /* Do nothing */ + } + else /* no more interrupts enabled on interrupt line 0 */ + { + /* Disable interrupt line 0 */ + CLEAR_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE0); + } + + /* Check if some interrupts are still enabled on interrupt line 1 */ + if ((((ITs_enabled & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) != 0U))) + { + /* Do nothing */ + } + else /* no more interrupts enabled on interrupt line 1 */ + { + /* Disable interrupt line 1 */ + CLEAR_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE1); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Handles FDCAN interrupt request. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +void HAL_FDCAN_IRQHandler(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t TxEventFifoITs; + uint32_t RxFifo0ITs; + uint32_t RxFifo1ITs; + uint32_t Errors; + uint32_t ErrorStatusITs; + uint32_t TransmittedBuffers; + uint32_t AbortedBuffers; + + TxEventFifoITs = hfdcan->Instance->IR & FDCAN_TX_EVENT_FIFO_MASK; + TxEventFifoITs &= hfdcan->Instance->IE; + RxFifo0ITs = hfdcan->Instance->IR & FDCAN_RX_FIFO0_MASK; + RxFifo0ITs &= hfdcan->Instance->IE; + RxFifo1ITs = hfdcan->Instance->IR & FDCAN_RX_FIFO1_MASK; + RxFifo1ITs &= hfdcan->Instance->IE; + Errors = hfdcan->Instance->IR & FDCAN_ERROR_MASK; + Errors &= hfdcan->Instance->IE; + ErrorStatusITs = hfdcan->Instance->IR & FDCAN_ERROR_STATUS_MASK; + ErrorStatusITs &= hfdcan->Instance->IE; + + /* High Priority Message interrupt management *******************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_RX_HIGH_PRIORITY_MSG) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_RX_HIGH_PRIORITY_MSG) != 0U) + { + /* Clear the High Priority Message flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_RX_HIGH_PRIORITY_MSG); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->HighPriorityMessageCallback(hfdcan); +#else + /* High Priority Message Callback */ + HAL_FDCAN_HighPriorityMessageCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Transmission Abort interrupt management **********************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TX_ABORT_COMPLETE) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* List of aborted monitored buffers */ + AbortedBuffers = hfdcan->Instance->TXBCF; + AbortedBuffers &= hfdcan->Instance->TXBCIE; + + /* Clear the Transmission Cancellation flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_ABORT_COMPLETE); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxBufferAbortCallback(hfdcan, AbortedBuffers); +#else + /* Transmission Cancellation Callback */ + HAL_FDCAN_TxBufferAbortCallback(hfdcan, AbortedBuffers); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Tx event FIFO interrupts management **************************************/ + if (TxEventFifoITs != 0U) + { + /* Clear the Tx Event FIFO flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, TxEventFifoITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxEventFifoCallback(hfdcan, TxEventFifoITs); +#else + /* Tx Event FIFO Callback */ + HAL_FDCAN_TxEventFifoCallback(hfdcan, TxEventFifoITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Rx FIFO 0 interrupts management ******************************************/ + if (RxFifo0ITs != 0U) + { + /* Clear the Rx FIFO 0 flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, RxFifo0ITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->RxFifo0Callback(hfdcan, RxFifo0ITs); +#else + /* Rx FIFO 0 Callback */ + HAL_FDCAN_RxFifo0Callback(hfdcan, RxFifo0ITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Rx FIFO 1 interrupts management ******************************************/ + if (RxFifo1ITs != 0U) + { + /* Clear the Rx FIFO 1 flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, RxFifo1ITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->RxFifo1Callback(hfdcan, RxFifo1ITs); +#else + /* Rx FIFO 1 Callback */ + HAL_FDCAN_RxFifo1Callback(hfdcan, RxFifo1ITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Tx FIFO empty interrupt management ***************************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TX_FIFO_EMPTY) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TX_FIFO_EMPTY) != 0U) + { + /* Clear the Tx FIFO empty flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_FIFO_EMPTY); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxFifoEmptyCallback(hfdcan); +#else + /* Tx FIFO empty Callback */ + HAL_FDCAN_TxFifoEmptyCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Transmission Complete interrupt management *******************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TX_COMPLETE) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TX_COMPLETE) != 0U) + { + /* List of transmitted monitored buffers */ + TransmittedBuffers = hfdcan->Instance->TXBTO; + TransmittedBuffers &= hfdcan->Instance->TXBTIE; + + /* Clear the Transmission Complete flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_COMPLETE); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxBufferCompleteCallback(hfdcan, TransmittedBuffers); +#else + /* Transmission Complete Callback */ + HAL_FDCAN_TxBufferCompleteCallback(hfdcan, TransmittedBuffers); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Timestamp Wraparound interrupt management ********************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TIMESTAMP_WRAPAROUND) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TIMESTAMP_WRAPAROUND) != 0U) + { + /* Clear the Timestamp Wraparound flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TIMESTAMP_WRAPAROUND); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TimestampWraparoundCallback(hfdcan); +#else + /* Timestamp Wraparound Callback */ + HAL_FDCAN_TimestampWraparoundCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Timeout Occurred interrupt management ************************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TIMEOUT_OCCURRED) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TIMEOUT_OCCURRED) != 0U) + { + /* Clear the Timeout Occurred flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TIMEOUT_OCCURRED); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TimeoutOccurredCallback(hfdcan); +#else + /* Timeout Occurred Callback */ + HAL_FDCAN_TimeoutOccurredCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Message RAM access failure interrupt management **************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_RAM_ACCESS_FAILURE) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_RAM_ACCESS_FAILURE) != 0U) + { + /* Clear the Message RAM access failure flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_RAM_ACCESS_FAILURE); + + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_RAM_ACCESS; + } + } + + /* Error Status interrupts management ***************************************/ + if (ErrorStatusITs != 0U) + { + /* Clear the Error flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, ErrorStatusITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->ErrorStatusCallback(hfdcan, ErrorStatusITs); +#else + /* Error Status Callback */ + HAL_FDCAN_ErrorStatusCallback(hfdcan, ErrorStatusITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Error interrupts management **********************************************/ + if (Errors != 0U) + { + /* Clear the Error flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, Errors); + + /* Update error code */ + hfdcan->ErrorCode |= Errors; + } + + if (hfdcan->ErrorCode != HAL_FDCAN_ERROR_NONE) + { +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->ErrorCallback(hfdcan); +#else + /* Error Callback */ + HAL_FDCAN_ErrorCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group5 Callback functions + * @brief FDCAN Callback functions + * +@verbatim + ============================================================================== + ##### Callback functions ##### + ============================================================================== + [..] + This subsection provides the following callback functions: + (+) HAL_FDCAN_TxEventFifoCallback + (+) HAL_FDCAN_RxFifo0Callback + (+) HAL_FDCAN_RxFifo1Callback + (+) HAL_FDCAN_TxFifoEmptyCallback + (+) HAL_FDCAN_TxBufferCompleteCallback + (+) HAL_FDCAN_TxBufferAbortCallback + (+) HAL_FDCAN_HighPriorityMessageCallback + (+) HAL_FDCAN_TimestampWraparoundCallback + (+) HAL_FDCAN_TimeoutOccurredCallback + (+) HAL_FDCAN_ErrorCallback + (+) HAL_FDCAN_ErrorStatusCallback + +@endverbatim + * @{ + */ + +/** + * @brief Tx Event callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TxEventFifoITs indicates which Tx Event FIFO interrupts are signalled. + * This parameter can be any combination of @arg FDCAN_Tx_Event_Fifo_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_TxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(TxEventFifoITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxEventFifoCallback could be implemented in the user file + */ +} + +/** + * @brief Rx FIFO 0 callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo0ITs indicates which Rx FIFO 0 interrupts are signalled. + * This parameter can be any combination of @arg FDCAN_Rx_Fifo0_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(RxFifo0ITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_RxFifo0Callback could be implemented in the user file + */ +} + +/** + * @brief Rx FIFO 1 callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo1ITs indicates which Rx FIFO 1 interrupts are signalled. + * This parameter can be any combination of @arg FDCAN_Rx_Fifo1_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_RxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(RxFifo1ITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_RxFifo1Callback could be implemented in the user file + */ +} + +/** + * @brief Tx FIFO Empty callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TxFifoEmptyCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxFifoEmptyCallback could be implemented in the user file + */ +} + +/** + * @brief Transmission Complete callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndexes Indexes of the transmitted buffers. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval None + */ +__weak void HAL_FDCAN_TxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(BufferIndexes); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxBufferCompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Transmission Cancellation callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndexes Indexes of the aborted buffers. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval None + */ +__weak void HAL_FDCAN_TxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(BufferIndexes); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxBufferAbortCallback could be implemented in the user file + */ +} + +/** + * @brief Timestamp Wraparound callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TimestampWraparoundCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TimestampWraparoundCallback could be implemented in the user file + */ +} + +/** + * @brief Timeout Occurred callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TimeoutOccurredCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TimeoutOccurredCallback could be implemented in the user file + */ +} + +/** + * @brief High Priority Message callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_HighPriorityMessageCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_HighPriorityMessageCallback could be implemented in the user file + */ +} + +/** + * @brief Error callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_ErrorCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Error status callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ErrorStatusITs indicates which Error Status interrupts are signaled. + * This parameter can be any combination of @arg FDCAN_Error_Status_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_ErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(ErrorStatusITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_ErrorStatusCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group6 Peripheral State functions + * @brief FDCAN Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) HAL_FDCAN_GetState() : Return the FDCAN state. + (+) HAL_FDCAN_GetError() : Return the FDCAN error code if any. + +@endverbatim + * @{ + */ +/** + * @brief Return the FDCAN state + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL state + */ +HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan) +{ + /* Return FDCAN state */ + return hfdcan->State; +} + +/** + * @brief Return the FDCAN error code + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval FDCAN Error Code + */ +uint32_t HAL_FDCAN_GetError(FDCAN_HandleTypeDef *hfdcan) +{ + /* Return FDCAN error code */ + return hfdcan->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FDCAN_Private_Functions + * @{ + */ + +/** + * @brief Calculate each RAM block start address and size + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval none + */ +static void FDCAN_CalcultateRamBlockAddresses(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t RAMcounter; + uint32_t SramCanInstanceBase = SRAMCAN_BASE; +#if defined(FDCAN2) + + if (hfdcan->Instance == FDCAN2) + { + SramCanInstanceBase += SRAMCAN_SIZE; + } +#endif /* FDCAN2 */ + + /* Standard filter list start address */ + hfdcan->msgRam.StandardFilterSA = SramCanInstanceBase + SRAMCAN_FLSSA; + + /* Standard filter elements number */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_LSS, (hfdcan->Init.StdFiltersNbr << FDCAN_RXGFC_LSS_Pos)); + + /* Extended filter list start address */ + hfdcan->msgRam.ExtendedFilterSA = SramCanInstanceBase + SRAMCAN_FLESA; + + /* Extended filter elements number */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_LSE, (hfdcan->Init.ExtFiltersNbr << FDCAN_RXGFC_LSE_Pos)); + + /* Rx FIFO 0 start address */ + hfdcan->msgRam.RxFIFO0SA = SramCanInstanceBase + SRAMCAN_RF0SA; + + /* Rx FIFO 1 start address */ + hfdcan->msgRam.RxFIFO1SA = SramCanInstanceBase + SRAMCAN_RF1SA; + + /* Tx event FIFO start address */ + hfdcan->msgRam.TxEventFIFOSA = SramCanInstanceBase + SRAMCAN_TEFSA; + + /* Tx FIFO/queue start address */ + hfdcan->msgRam.TxFIFOQSA = SramCanInstanceBase + SRAMCAN_TFQSA; + + /* Flush the allocated Message RAM area */ + for (RAMcounter = SramCanInstanceBase; RAMcounter < (SramCanInstanceBase + SRAMCAN_SIZE); RAMcounter += 4U) + { + *(uint32_t *)(RAMcounter) = 0x00000000U; + } +} + +/** + * @brief Copy Tx message to the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxHeader pointer to a FDCAN_TxHeaderTypeDef structure. + * @param pTxData pointer to a buffer containing the payload of the Tx frame. + * @param BufferIndex index of the buffer to be configured. + * @retval none + */ +static void FDCAN_CopyMessageToRAM(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData, uint32_t BufferIndex) +{ + uint32_t TxElementW1; + uint32_t TxElementW2; + uint32_t *TxAddress; + uint32_t ByteCounter; + + /* Build first word of Tx header element */ + if (pTxHeader->IdType == FDCAN_STANDARD_ID) + { + TxElementW1 = (pTxHeader->ErrorStateIndicator | + FDCAN_STANDARD_ID | + pTxHeader->TxFrameType | + (pTxHeader->Identifier << 18U)); + } + else /* pTxHeader->IdType == FDCAN_EXTENDED_ID */ + { + TxElementW1 = (pTxHeader->ErrorStateIndicator | + FDCAN_EXTENDED_ID | + pTxHeader->TxFrameType | + pTxHeader->Identifier); + } + + /* Build second word of Tx header element */ + TxElementW2 = ((pTxHeader->MessageMarker << 24U) | + pTxHeader->TxEventFifoControl | + pTxHeader->FDFormat | + pTxHeader->BitRateSwitch | + pTxHeader->DataLength); + + /* Calculate Tx element address */ + TxAddress = (uint32_t *)(hfdcan->msgRam.TxFIFOQSA + (BufferIndex * SRAMCAN_TFQ_SIZE)); + + /* Write Tx element header to the message RAM */ + *TxAddress = TxElementW1; + TxAddress++; + *TxAddress = TxElementW2; + TxAddress++; + + /* Write Tx payload to the message RAM */ + for (ByteCounter = 0; ByteCounter < DLCtoBytes[pTxHeader->DataLength >> 16U]; ByteCounter += 4U) + { + *TxAddress = (((uint32_t)pTxData[ByteCounter + 3U] << 24U) | + ((uint32_t)pTxData[ByteCounter + 2U] << 16U) | + ((uint32_t)pTxData[ByteCounter + 1U] << 8U) | + (uint32_t)pTxData[ByteCounter]); + TxAddress++; + } +} + +/** + * @} + */ +#endif /* HAL_FDCAN_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* FDCAN1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c new file mode 100644 index 0000000..4b2b2ff --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c @@ -0,0 +1,719 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch and cache lines. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Prefetch on I-Code + (+) 32 cache lines of 4*64 bits on I-Code + (+) Error code correction (ECC) : Data in flash are 72-bits word + (8 bits added per double word) + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32G0xx devices. + + (#) Flash Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: double word and fast program (full row programming) + (++) There are two modes of programming: + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions: + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_OB_Launch() function. + In this case, a reset is generated + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the Instruction cache + (+) Reset the Instruction cache + (+) Enable/Disable the Flash power-down during low-power run and sleep modes + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_FLASH_ERROR_NONE, \ + .ProcedureOnGoing = FLASH_TYPENONE, \ + .Address = 0U, \ + .Banks = 0U, \ + .Page = 0U, \ + .NbPagesToErase = 0U + }; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program double word or fast program of a row at a specified address. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG or FSTPG Bit */ + CLEAR_BIT(FLASH->CR, TypeProgram); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Program double word or fast program of a row at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = TypeProgram; + pFlash.Address = Address; + + /* Enable End of Operation and Error interrupts */ + FLASH->CR |= FLASH_CR_EOPIE | FLASH_CR_ERRIE; + + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + } + + /* return status */ + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t param; + uint32_t error; + + /* Save flash errors. */ + error = (FLASH->SR & FLASH_SR_ERRORS); + + /* A] Set parameter for user or error callbacks */ + /* check operation was a program or erase */ + if ((pFlash.ProcedureOnGoing & FLASH_TYPEERASE_MASS) != 0x00U) + { + /* return bank number */ + param = pFlash.Banks; + } + else + { + /* Clear operation only for page erase or program */ + CLEAR_BIT(FLASH->CR, pFlash.ProcedureOnGoing); + + if ((pFlash.ProcedureOnGoing & (FLASH_TYPEPROGRAM_DOUBLEWORD | FLASH_TYPEPROGRAM_FAST)) != 0x00U) + { + /* return address being programmed */ + param = pFlash.Address; + } + else + { + /* return page number being erased */ + param = pFlash.Page; + } + } + + /* B] Check errors */ + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* clear error flags */ + FLASH->SR = FLASH_SR_ERRORS; + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + + /* Error callback */ + HAL_FLASH_OperationErrorCallback(param); + } + + /* C] Check FLASH End of Operation flag */ + if ((FLASH->SR & FLASH_SR_EOP) != 0x00U) + { + /* Clear FLASH End of Operation pending bit */ + FLASH->SR = FLASH_SR_EOP; + + if (pFlash.ProcedureOnGoing == FLASH_TYPEERASE_PAGES) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase*/ + if (pFlash.NbPagesToErase != 0x00U) + { + /* Increment page number */ + pFlash.Page++; + FLASH_PageErase(pFlash.Banks, pFlash.Page); + } + else + { + /* No more pages to erase: stop erase pages procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + } + else + { + /*Stop the ongoing procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + + /* User callback */ + HAL_FLASH_EndOfOperationCallback(param); + } + + if (pFlash.ProcedureOnGoing == FLASH_TYPENONE) + { + /* Disable End of Operation and Error interrupts */ + FLASH->CR &= ~(FLASH_CR_EOPIE | FLASH_CR_ERRIE); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page which has been erased + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* verify Flash is unlock */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Lock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + /* verify Flash is locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Unlock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00U) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + + /* verify option bytes are unlocked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) == 0x00U) + { + status = HAL_OK; + } + } + + return status; +} + +/** + * @brief Lock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK); + + /* verify option bytes are locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Launch the option byte loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* We should not reach here : Option byte launch generates Option byte reset + so return error */ + return HAL_ERROR; +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be + * @arg @ref HAL_FLASH_ERROR_NONE No error set + * @arg @ref HAL_FLASH_ERROR_OP Operation error + * @arg @ref HAL_FLASH_ERROR_PROG Programming error + * @arg @ref HAL_FLASH_ERROR_WRP Write protection error + * @arg @ref HAL_FLASH_ERROR_PGA Programming alignment error + * @arg @ref HAL_FLASH_ERROR_SIZ Size error + * @arg @ref HAL_FLASH_ERROR_PGS Programming sequence error + * @arg @ref HAL_FLASH_ERROR_MIS Fast programming data miss error + * @arg @ref HAL_FLASH_ERROR_FAST Fast programming error + * @arg @ref HAL_FLASH_ERROR_RD Read Protection error (PCROP)(*) + * @arg @ref HAL_FLASH_ERROR_OPTV Option validity error + * @arg @ref HAL_FLASH_ERROR_ECCD two ECC errors have been detected + * @note (*) availability depends on devices + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + uint32_t error; + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + uint32_t timeout = HAL_GetTick() + Timeout; + + /* Wait if any operation is ongoing */ +#if defined(FLASH_DBANK_SUPPORT) + error = (FLASH_SR_BSY1 | FLASH_SR_BSY2); +#else + error = FLASH_SR_BSY1; +#endif + + while ((FLASH->SR & error) != 0x00U) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + /* check flash errors */ + error = (FLASH->SR & FLASH_SR_ERRORS); + + /* Clear SR register */ + FLASH->SR = FLASH_SR_CLEAR; + + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode = error; + return HAL_ERROR; + } + + /* Wait for control register to be written */ + timeout = HAL_GetTick() + Timeout; + + while ((FLASH->SR & FLASH_SR_CFGBSY) != 0x00U) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Program double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) +{ + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Program first word */ + *(uint32_t *)Address = (uint32_t)Data; + + /* Barrier to ensure programming is performed in 2 steps, in right order + (independently of compiler optimization behavior) */ + __ISB(); + + /* Program second word */ + *(uint32_t *)(Address + 4U) = (uint32_t)(Data >> 32U); +} + +/** + * @brief Fast program a 32 row double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param DataAddress Specifies the address where the data are stored. + * @retval None + */ +static __RAM_FUNC void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 0; + uint32_t dest = Address; + uint32_t src = DataAddress; + uint32_t primask_bit; + + /* Set FSTPG bit */ + SET_BIT(FLASH->CR, FLASH_CR_FSTPG); + + /* Enter critical section: row programming should not be longer than 7 ms */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Fast Program : 64 words */ + while (index < 64U) + { + *(uint32_t *)dest = *(uint32_t *)src; + src += 4U; + dest += 4U; + index++; + } + + /* wait for BSY1 in order to be sure that flash operation is ended befoire + allowing prefetch in flash. Timeout does not return status, as it will + be anyway done later */ + +#if defined(FLASH_DBANK_SUPPORT) + while ((FLASH->SR & (FLASH_SR_BSY1 | FLASH_SR_BSY2)) != 0x00U) +#else + while ((FLASH->SR & FLASH_SR_BSY1) != 0x00U) +#endif + { + } + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c new file mode 100644 index 0000000..7f68312 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c @@ -0,0 +1,1304 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32G0xx + devices contains the following additional features + + (+) Capacity up to 128 Kbytes with single bank architecture supporting read-while-write + capability (RWW) + (+) Single bank memory organization + (+) PCROP protection + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32G0xx devices. It includes + (#) Flash Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Erase page, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to : + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Configure the PCROP protection + (++) Set Securable memory area and boot entry point + + (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to : + (++) Get the value of a write protection area + (++) Know if the read protection is activated + (++) Get the value of the user Option Bytes + (++) Get Securable memory area and boot entry point information + + (#) Enable or disable debugger usage using HAL_FLASHEx_EnableDebugger and + HAL_FLASHEx_DisableDebugger. + + (#) Check is flash content is empty or not using HAL_FLASHEx_FlashEmptyCheck. + and modify this setting (for flash loader purpose e.g.) using + HAL_FLASHEx_ForceFlashEmpty. + + (#) Enable securable memory area protectionusing HAL_FLASHEx_EnableSecMemProtection + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(uint32_t Banks); +void FLASH_FlushCaches(void); +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset); +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel); +static uint32_t FLASH_OB_GetRDP(void); +static uint32_t FLASH_OB_GetUser(void); +#if defined(FLASH_PCROP_SUPPORT) +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr); +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr); +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr); +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr); +#if defined(FLASH_DBANK_SUPPORT) +static void FLASH_OB_PCROP2AConfig(uint32_t PCROP2AStartAddr, uint32_t PCROP2AEndAddr); +static void FLASH_OB_PCROP2BConfig(uint32_t PCROP2BStartAddr, uint32_t PCROP2BEndAddr); +static void FLASH_OB_GetPCROP2A(uint32_t *PCROP2AStartAddr, uint32_t *PCROP2AEndAddr); +static void FLASH_OB_GetPCROP2B(uint32_t *PCROP2BStartAddr, uint32_t *PCROP2BEndAddr); +#endif +#endif +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize, uint32_t SecSize2); +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize, uint32_t *SecSize2); +#else +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize); +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize); +#endif +#endif +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASH Extended Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @param[in] pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @param[out] PageError Pointer to variable that contains the configuration + * information on faulty page in case of error (0xFFFFFFFF means that all + * the pages have been correctly erased) + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status; + uint32_t index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { +#if !defined(FLASH_DBANK_SUPPORT) + /* For single bank product force Banks to Bank 1 */ + pEraseInit->Banks = FLASH_BANK_1; +#endif + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Proceed to Mass Erase */ + FLASH_MassErase(pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + for (index = pEraseInit->Page; index < (pEraseInit->Page + pEraseInit->NbPages); index++) + { + /* Start erase page */ + FLASH_PageErase(pEraseInit->Banks, index); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = index; + break; + } + } + + /* If operation is completed or interrupted, disable the Page Erase Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @param pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* save procedure for interrupt treatment */ + pFlash.ProcedureOnGoing = pEraseInit->TypeErase; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { +#if !defined(FLASH_DBANK_SUPPORT) + /* For single bank product force Banks to Bank 1 */ + pEraseInit->Banks = FLASH_BANK_1; +#endif + /* Store Bank number */ + pFlash.Banks = pEraseInit->Banks; + + /* Enable End of Operation and Error interrupts */ + FLASH->CR |= FLASH_CR_EOPIE | FLASH_CR_ERRIE; + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Set Page to 0 for Interrupt callback management */ + pFlash.Page = 0; + + /* Proceed to Mass Erase */ + FLASH_MassErase(pEraseInit->Banks); + } + else + { + /* Erase by page to be done */ + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->Page; + + /*Erase 1st page and wait for IT */ + FLASH_PageErase(pEraseInit->Banks, pEraseInit->Page); + } + } + + /* return status */ + return status; +} + +/** + * @brief Program Option bytes. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * @note To configure any option bytes, the option lock bit OPTLOCK must be + * cleared with the call of @ref HAL_FLASH_OB_Unlock() function. + * @note New option bytes configuration will be taken into account only + * - after an option bytes launch through the call of @ref HAL_FLASH_OB_Launch() + * - a Power On Reset + * - an exit from Standby or Shutdown mode. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + uint32_t optr; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write protection configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_WRP) != 0x00U) + { + /* Configure of Write protection on the selected area */ + FLASH_OB_WRPConfig(pOBInit->WRPArea, pOBInit->WRPStartOffset, pOBInit->WRPEndOffset); + } + + /* Option register */ + if ((pOBInit->OptionType & (OPTIONBYTE_RDP | OPTIONBYTE_USER)) == (OPTIONBYTE_RDP | OPTIONBYTE_USER)) + { + /* Fully modify OPTR register with RDP & user data */ + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_RDP) != 0x00U) + { + /* Only modify RDP so get current user data */ + optr = FLASH_OB_GetUser(); + FLASH_OB_OptrConfig(optr, optr, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_USER) != 0x00U) + { + /* Only modify user so get current RDP level */ + optr = FLASH_OB_GetRDP(); + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, optr); + } + else + { + /* nothing to do */ + } + +#if defined(FLASH_PCROP_SUPPORT) + /* PCROP Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0x00U) + { + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(pOBInit->PCROPConfig)); + + if ((pOBInit->PCROPConfig & (OB_PCROP_ZONE_A | OB_PCROP_RDP_ERASE)) != 0x00U) + { + /* Configure the 1A Proprietary code readout protection */ + FLASH_OB_PCROP1AConfig(pOBInit->PCROPConfig, pOBInit->PCROP1AStartAddr, pOBInit->PCROP1AEndAddr); + } + + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE_B) != 0x00U) + { + /* Configure the 1B Proprietary code readout protection */ + FLASH_OB_PCROP1BConfig(pOBInit->PCROP1BStartAddr, pOBInit->PCROP1BEndAddr); + } + +#if defined(FLASH_DBANK_SUPPORT) + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE2_A) != 0x00U) + { + /* Configure the 2A Proprietary code readout protection */ + FLASH_OB_PCROP2AConfig(pOBInit->PCROP2AStartAddr, pOBInit->PCROP2AEndAddr); + } + + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE2_B) != 0x00U) + { + /* Configure the 2B Proprietary code readout protection */ + FLASH_OB_PCROP2BConfig(pOBInit->PCROP2BStartAddr, pOBInit->PCROP2BEndAddr); + } +#endif + } +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) + /* Securable Memory Area Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_SEC) != 0x00U) + { +#if defined(FLASH_DBANK_SUPPORT) + /* Configure the securable memory area protection */ + FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize, pOBInit->SecSize2); +#else + /* Configure the securable memory area protection */ + FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize); +#endif + } +#endif + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Get the Option bytes configuration. + * @note warning: this API only read flash register, it does not reflect any + * change that would have been programmed between previous Option byte + * loading and current call. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that contains the + * configuration information. The fields pOBInit->WRPArea should + * indicate which area is requested for the WRP. + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_ALL; + + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(pOBInit->WRPArea, &(pOBInit->WRPStartOffset), &(pOBInit->WRPEndOffset)); + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + pOBInit->USERType = OB_USER_ALL; + +#if defined(FLASH_PCROP_SUPPORT) + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP1A(&(pOBInit->PCROPConfig), &(pOBInit->PCROP1AStartAddr), &(pOBInit->PCROP1AEndAddr)); + FLASH_OB_GetPCROP1B(&(pOBInit->PCROP1BStartAddr), &(pOBInit->PCROP1BEndAddr)); + pOBInit->PCROPConfig |= (OB_PCROP_ZONE_A | OB_PCROP_ZONE_B); +#if defined(FLASH_DBANK_SUPPORT) + FLASH_OB_GetPCROP2A(&(pOBInit->PCROP2AStartAddr), &(pOBInit->PCROP2AEndAddr)); + FLASH_OB_GetPCROP2B(&(pOBInit->PCROP2BStartAddr), &(pOBInit->PCROP2BEndAddr)); + pOBInit->PCROPConfig |= (OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B); +#endif +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) + /* Get the Securable Memory Area protection */ + FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize), &(pOBInit->SecSize2)); +#else + /* Get the Securable Memory Area protection */ + FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize)); +#endif +#endif +} + +#if defined(FLASH_ACR_DBG_SWEN) +/** + * @brief Enable Debugger. + * @note After calling this API, flash interface allow debugger intrusion. + * @retval None + */ +void HAL_FLASHEx_EnableDebugger(void) +{ + FLASH->ACR |= FLASH_ACR_DBG_SWEN; +} + + +/** + * @brief Disable Debugger. + * @note After calling this API, Debugger is disabled: it is no more possible to + * break, see CPU register, etc... + * @retval None + */ +void HAL_FLASHEx_DisableDebugger(void) +{ + FLASH->ACR &= ~FLASH_ACR_DBG_SWEN; +} +#endif /* FLASH_ACR_DBG_SWEN */ + +/** + * @brief Flash Empty check + * @note This API checks if first location in Flash is programmed or not. + * This check is done once by Option Byte Loader. + * @retval 0 if 1st location is not programmed else + */ +uint32_t HAL_FLASHEx_FlashEmptyCheck(void) +{ + return ((FLASH->ACR & FLASH_ACR_PROGEMPTY)); +} + + +/** + * @brief Force Empty check value. + * @note Allows to modify program empty check value in order to force this + * infrmation in Flash Interface, for all next reset that do not launch + * Option Byte Loader. + * @param FlashEmpty this parameter can be a value of @ref FLASHEx_Empty_Check + * @retval None + */ +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty) +{ + uint32_t acr; + assert_param(IS_FLASH_EMPTY_CHECK(FlashEmpty)); + + acr = (FLASH->ACR & ~FLASH_ACR_PROGEMPTY); + FLASH->ACR = (acr | FlashEmpty); +} + + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +/** + * @brief Securable memory area protection enable + * @param Banks Select Bank to be secured. + * This parameter can be a value of @ref FLASH_Banks + * @note On some devices, there is only 1 bank so parameter has to be set FLASH_BANK_1. + * @note This API locks Securable memory area which is defined in SEC_SIZE option byte + * (that can be retrieved calling HAL_FLASHEx_OBGetConfig API and checking + * Secsize). + * @note SEC_PROT bit can only be set, it will be reset by system reset. + * @retval None + */ +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks) +{ +#if defined(FLASH_DBANK_SUPPORT) + assert_param(IS_FLASH_BANK(Banks)); + + if (Banks == (FLASH_BANK_2 | FLASH_BANK_1)) + { + FLASH->CR |= (FLASH_CR_SEC_PROT2 | FLASH_CR_SEC_PROT); + } + else if (Banks == FLASH_BANK_2) + { + FLASH->CR |= FLASH_CR_SEC_PROT2; + } + else +#else + UNUSED(Banks); +#endif + { + FLASH->CR |= FLASH_CR_SEC_PROT; + } +} +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Mass erase of FLASH memory. + * @param Banks: Banks to be erased + * This parameter can be a combination of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased* + * @note (*) availability depends on devices + * @retval None + */ +static void FLASH_MassErase(uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Set the Mass Erase Bit and start bit */ + FLASH->CR |= (FLASH_CR_STRT | Banks); +} + +/** + * @brief Erase the specified FLASH memory page. + * @param Banks: Banks to be erased + * This parameter can one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased* + * @param Page FLASH page to erase + * This parameter must be a value between 0 and (max number of pages in Flash - 1) + * @note (*) availability depends on devices + * @retval None + */ +void FLASH_PageErase(uint32_t Banks, uint32_t Page) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + assert_param(IS_FLASH_PAGE(Page)); + + /* Get configuration register, then clear page number */ + tmp = (FLASH->CR & ~FLASH_CR_PNB); + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if page has to be erased in bank 1 or 2 */ + if(Banks != FLASH_BANK_1) + { + tmp |= FLASH_CR_BKER; + } + else + { + tmp &= ~FLASH_CR_BKER; + } +#endif + + /* Set page number, Page Erase bit & Start bit */ + FLASH->CR = (tmp | (FLASH_CR_STRT | (Page << FLASH_CR_PNB_Pos) | FLASH_CR_PER)); +} + +/** + * @brief Flush the instruction cache. + * @retval None + */ +void FLASH_FlushCaches(void) +{ + /* Flush instruction cache */ + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + /* Disable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + /* Reset instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + /* Enable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + } +} + + +/** + * @brief Configure the write protection of the desired pages. + * @note When WRP is active in a zone, it cannot be erased or programmed. + * Consequently, a software mass erase cannot be performed if one zone + * is write-protected. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase Flash memory if the CPU debug + * features are connected (JTAG or single wire) or boot code is being + * executed from RAM or System flash, even if WRP is not activated. + * @param WRPArea Specifies the area to be configured. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @arg @ref OB_WRPAREA_ZONE2_A Flash Bank 2 Zone A (*) + * @arg @ref OB_WRPAREA_ZONE2_B Flash Bank 2 Zone B (*) + * @note (*) availability depends on devices + * @param WRPStartOffset Specifies the start page of the write protected area + * This parameter can be page number between 0 and (max number of pages in the Flash Bank - 1) + * @param WRDPEndOffset Specifies the end page of the write protected area + * This parameter can be page number between WRPStartOffset and (max number of pages in the Flash Bank - 1) + * @retval None + */ +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + assert_param(IS_FLASH_PAGE(WRPStartOffset)); + assert_param(IS_FLASH_PAGE(WRDPEndOffset)); + + /* Configure the write protected area */ + if (WRPArea == OB_WRPAREA_ZONE_A) + { + FLASH->WRP1AR = ((WRDPEndOffset << FLASH_WRP1AR_WRP1A_END_Pos) | WRPStartOffset); + } +#if defined(FLASH_DBANK_SUPPORT) + else if (WRPArea == OB_WRPAREA_ZONE2_A) + { + FLASH->WRP2AR = ((WRDPEndOffset << FLASH_WRP2AR_WRP2A_END_Pos) | WRPStartOffset); + } + else if (WRPArea == OB_WRPAREA_ZONE2_B) + { + FLASH->WRP2BR = ((WRDPEndOffset << FLASH_WRP2BR_WRP2B_END_Pos) | WRPStartOffset); + } +#endif + else + { + FLASH->WRP1BR = ((WRDPEndOffset << FLASH_WRP1BR_WRP1B_END_Pos) | WRPStartOffset); + } +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @param[in] WRPArea Specifies the area to be returned. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @arg @ref OB_WRPAREA_ZONE2_A Flash Bank 2 Zone A (*) + * @arg @ref OB_WRPAREA_ZONE2_B Flash Bank 2 Zone B (*) + * @note (*) availability depends on devices + * @param[out] WRPStartOffset Specifies the address where to copied the start page + * of the write protected area + * @param[out] WRDPEndOffset Dpecifies the address where to copied the end page of + * the write protected area + * @retval None + */ +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + + /* Get the configuration of the write protected area */ + if (WRPArea == OB_WRPAREA_ZONE_A) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos); + } +#if defined(FLASH_DBANK_SUPPORT) + else if (WRPArea == OB_WRPAREA_ZONE2_A) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_END) >> FLASH_WRP2AR_WRP2A_END_Pos); + } + else if (WRPArea == OB_WRPAREA_ZONE2_B) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos); + } +#endif +else + { + *WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos); + } +} + +/** + * @brief Set user & RDP configuration + * @note !!! Warning : When enabling OB_RDP level 2 it is no more possible + * to go back to level 1 or 0 !!! + * @param UserType The FLASH User Option Bytes to be modified. + * This parameter can be a combination of @ref FLASH_OB_USER_Type + * @param UserConfig The FLASH User Option Bytes values. + * This parameter can be a combination of: + * @arg @ref FLASH_OB_USER_BOR_ENABLE(*) + * @arg @ref FLASH_OB_USER_BOR_LEVEL(*) + * @arg @ref FLASH_OB_USER_RESET_CONFIG(*) + * @arg @ref FLASH_OB_USER_nRST_STOP + * @arg @ref FLASH_OB_USER_nRST_STANDBY + * @arg @ref FLASH_OB_USER_nRST_SHUTDOWN(*) + * @arg @ref FLASH_OB_USER_IWDG_SW + * @arg @ref FLASH_OB_USER_IWDG_STOP + * @arg @ref FLASH_OB_USER_IWDG_STANDBY + * @arg @ref FLASH_OB_USER_WWDG_SW + * @arg @ref FLASH_OB_USER_SRAM_PARITY + * @arg @ref FLASH_OB_USER_BANK_SWAP(*) + * @arg @ref FLASH_OB_USER_DUAL_BANK(*) + * @arg @ref FLASH_OB_USER_nBOOT_SEL + * @arg @ref FLASH_OB_USER_nBOOT1 + * @arg @ref FLASH_OB_USER_nBOOT0 + * @arg @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Memory Read protection + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + * @note (*) availability depends on devices + * @retval None + */ +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel) +{ + uint32_t optr; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + assert_param(IS_OB_USER_CONFIG(UserType, UserConfig)); + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Configure the RDP level in the option bytes register */ + optr = FLASH->OPTR; + optr &= ~(UserType | FLASH_OPTR_RDP); + FLASH->OPTR = (optr | UserConfig | RDPLevel); +} + +/** + * @brief Return the FLASH Read Protection level. + * @retval FLASH ReadOut Protection Status: + * This return value can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdplvl = READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP); + + if ((rdplvl != OB_RDP_LEVEL_0) && (rdplvl != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return rdplvl; + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values. It will be a combination of all the following values: + * @arg @ref FLASH_OB_USER_BOR_ENABLE(*) + * @arg @ref FLASH_OB_USER_BOR_LEVEL(*) + * @arg @ref FLASH_OB_USER_RESET_CONFIG(*) + * @arg @ref FLASH_OB_USER_nRST_STOP + * @arg @ref FLASH_OB_USER_nRST_STANDBY + * @arg @ref FLASH_OB_USER_nRST_SHUTDOWN(*) + * @arg @ref FLASH_OB_USER_IWDG_SW + * @arg @ref FLASH_OB_USER_IWDG_STOP + * @arg @ref FLASH_OB_USER_IWDG_STANDBY + * @arg @ref FLASH_OB_USER_WWDG_SW + * @arg @ref FLASH_OB_USER_SRAM_PARITY + * @arg @ref FLASH_OB_USER_BANK_SWAP(*) + * @arg @ref FLASH_OB_USER_DUAL_BANK(*) + * @arg @ref FLASH_OB_USER_nBOOT_SEL + * @arg @ref FLASH_OB_USER_nBOOT1 + * @arg @ref FLASH_OB_USER_nBOOT0 + * @arg @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + * @note (*) availability depends on devices + */ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t user = ((FLASH->OPTR & ~FLASH_OPTR_RDP) & OB_USER_ALL); + return user; +} + +#if defined(FLASH_PCROP_SUPPORT) +/** + * @brief Configure the 1A Proprietary code readout protection & erase configuration on RDP regression. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROPConfig specifies the erase configuration (OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE) + * on RDP level 1 regression. + * @param PCROP1AStartAddr Specifies the Zone 1A Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1AEndAddr Specifies the Zone 1A end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1AStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t pcrop1aend; + uint32_t ropbase; + + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(PCROPConfig)); + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1AStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1AEndAddr)); + + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1AStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1AEndAddr)); + + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* get pcrop 1A end register */ + pcrop1aend = FLASH->PCROP1AER; + + /* Configure the Proprietary code readout protection offset */ + if ((PCROPConfig & OB_PCROP_ZONE_A) != 0x00U) + { + /* Compute offset depending on pcrop granularity */ + startoffset = ((PCROP1AStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1AEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone A start offset */ + FLASH->PCROP1ASR = startoffset; + + /* Set Zone A end offset */ + pcrop1aend &= ~FLASH_PCROP1AER_PCROP1A_END; + pcrop1aend |= endoffset; + } + + /* Set RDP erase protection if needed. This bit is only set & will be reset by mass erase */ + if ((PCROPConfig & OB_PCROP_RDP_ERASE) != 0x00U) + { + pcrop1aend |= FLASH_PCROP1AER_PCROP_RDP; + } + + /* set 1A End register */ + FLASH->PCROP1AER = pcrop1aend; +} + +/** + * @brief Configure the 1B Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPB_STRT and PCROPB_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP1BStartAddr Specifies the Zone 1B Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1BEndAddr Specifies the Zone 1B end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1BStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1BStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1BEndAddr)); + + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1BStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1BEndAddr)); + + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP1BStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1BEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone B start offset */ + FLASH->PCROP1BSR = startoffset; + /* Set Zone B end offset */ + FLASH->PCROP1BER = endoffset; +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROPConfig [out] specifies the configuration of PCROP_RDP option. + * @param PCROP1AStartAddr [out] Specifies the address where to copied the start address + * of the 1A Proprietary code readout protection + * @param PCROP1AEndAddr [out] Specifies the address where to copied the end address of + * the 1A Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP1ASR & FLASH_PCROP1ASR_PCROP1A_STRT); + *PCROP1AStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AStartAddr += ropbase; + + pcrop = FLASH->PCROP1AER; + *PCROP1AEndAddr = ((pcrop & FLASH_PCROP1AER_PCROP1A_END) << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); + + *PCROPConfig &= ~OB_PCROP_RDP_ERASE; + *PCROPConfig |= (pcrop & FLASH_PCROP1AER_PCROP_RDP); +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP1BStartAddr [out] Specifies the address where to copied the start address + * of the 1B Proprietary code readout protection + * @param PCROP1BEndAddr [out] Specifies the address where to copied the end address of + * the 1B Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP1BSR & FLASH_PCROP1BSR_PCROP1B_STRT); + *PCROP1BStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BStartAddr += ropbase; + + pcrop = (FLASH->PCROP1BER & FLASH_PCROP1BER_PCROP1B_END); + *PCROP1BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} + +#if defined(FLASH_DBANK_SUPPORT) +/** + * @brief Configure the 2A Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP2AStartAddr Specifies the Zone 2A Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP2AEndAddr Specifies the Zone 2A end address of the Proprietary code readout protection + * This parameter can be an address between PCROP2AStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP2AConfig(uint32_t PCROP2AStartAddr, uint32_t PCROP2AEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2AStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2AEndAddr)); + + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2AStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2AEndAddr)); + + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP2AStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP2AEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone A start offset */ + FLASH->PCROP2ASR = startoffset; + /* Set Zone A end offset */ + FLASH->PCROP2AER = endoffset; +} + +/** + * @brief Configure the 2B Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROP_STRT and PCROP_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP2BStartAddr Specifies the Zone 2B Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP2BEndAddr Specifies the Zone 2B end address of the Proprietary code readout protection + * This parameter can be an address between PCROP2BStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP2BConfig(uint32_t PCROP2BStartAddr, uint32_t PCROP2BEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2BStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2BEndAddr)); + + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2BStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2BEndAddr)); + + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP2BStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP2BEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone B start offset */ + FLASH->PCROP2BSR = startoffset; + /* Set Zone B end offset */ + FLASH->PCROP2BER = endoffset; +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP2AStartAddr [out] Specifies the address where to copied the start address + * of the 2A Proprietary code readout protection + * @param PCROP2AEndAddr [out] Specifies the address where to copied the end address of + * the 2A Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP2A(uint32_t *PCROP2AStartAddr, uint32_t *PCROP2AEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP2ASR & FLASH_PCROP2ASR_PCROP2A_STRT); + *PCROP2AStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2AStartAddr += ropbase; + + pcrop = (FLASH->PCROP2AER & FLASH_PCROP2AER_PCROP2A_END); + *PCROP2AEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2AEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP2BStartAddr [out] Specifies the address where to copied the start address + * of the 2B Proprietary code readout protection + * @param PCROP2BEndAddr [out] Specifies the address where to copied the end address of + * the 2B Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP2B(uint32_t *PCROP2BStartAddr, uint32_t *PCROP2BEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP2BSR & FLASH_PCROP2BSR_PCROP2B_STRT); + *PCROP2BStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2BStartAddr += ropbase; + + pcrop = (FLASH->PCROP2BER & FLASH_PCROP2BER_PCROP2B_END); + *PCROP2BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2BEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} +#endif +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +/** + * @brief Configure Securable Memory area feature. + * @param BootEntry specifies if boot scheme is forced to Flash (System or user) or not + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_ENTRY_FORCED_NONE No boot entry forced + * @arg @ref OB_BOOT_ENTRY_FORCED_FLASH Flash selected as unique entry boot + * @param SecSize specifies number of pages to protect as securable memory area, starting from + * beginning of Bank1 (page 0). + * @param SecSize2 specifies number of pages to protect as securable memory area, starting from + * beginning of Bank2 (page 0). + * @retval None + */ +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize, uint32_t SecSize2) +{ + uint32_t secmem; + + /* Check the parameters */ + assert_param(IS_OB_SEC_BOOT_LOCK(BootEntry)); + assert_param(IS_OB_SEC_SIZE(SecSize)); + assert_param(IS_OB_SEC_SIZE(SecSize2)); + + /* Set securable memory area configuration */ + secmem = (FLASH->SECR & ~(FLASH_SECR_BOOT_LOCK | FLASH_SECR_SEC_SIZE | FLASH_SECR_SEC_SIZE2)); + FLASH->SECR = (secmem | BootEntry | SecSize | (SecSize2 << FLASH_SECR_SEC_SIZE2_Pos)); +} + +/** + * @brief Return the FLASH Securable memory area protection Option Bytes value. + * @param BootEntry specifies boot scheme configuration + * @param SecSize specifies number of pages to protect as secure memory area, starting from + * beginning of Bank1 (page 0). + * @param SecSize2 specifies number of pages to protect as secure memory area, starting from + * beginning of Bank2 (page 0). + * @retval None + */ +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize, uint32_t *SecSize2) +{ + uint32_t secmem = FLASH->SECR; + + *BootEntry = (secmem & FLASH_SECR_BOOT_LOCK); + *SecSize = (secmem & FLASH_SECR_SEC_SIZE); + *SecSize2 = (secmem & FLASH_SECR_SEC_SIZE2) >> FLASH_SECR_SEC_SIZE2_Pos; +} + +#else +/** + * @brief Configure Securable Memory area feature. + * @param BootEntry specifies if boot scheme is forced to Flash (System or user) or not + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_ENTRY_FORCED_NONE No boot entry forced + * @arg @ref OB_BOOT_ENTRY_FORCED_FLASH FLash selected as unique entry boot + * @param SecSize specifies number of pages to protect as securable memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize) +{ + uint32_t secmem; + + /* Check the parameters */ + assert_param(IS_OB_SEC_BOOT_LOCK(BootEntry)); + assert_param(IS_OB_SEC_SIZE(SecSize)); + + /* Set securable memory area configuration */ + secmem = (FLASH->SECR & ~(FLASH_SECR_BOOT_LOCK | FLASH_SECR_SEC_SIZE)); + FLASH->SECR = (secmem | BootEntry | SecSize); +} + +/** + * @brief Return the FLASH Securable memory area protection Option Bytes value. + * @param BootEntry specifies boot scheme configuration + * @param SecSize specifies number of pages to protect as secure memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize) +{ + uint32_t secmem = FLASH->SECR; + + *BootEntry = (secmem & FLASH_SECR_BOOT_LOCK); + *SecSize = (secmem & FLASH_SECR_SEC_SIZE); +} +#endif +#endif + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c new file mode 100644 index 0000000..28d1103 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c @@ -0,0 +1,554 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 28 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PF0 and PF1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE (0x00000003u) +#define EXTI_MODE (0x10000000u) +#define GPIO_MODE_IT (0x00010000u) +#define GPIO_MODE_EVT (0x00020000u) +#define RISING_EDGE (0x00100000u) +#define FALLING_EDGE (0x00200000u) +#define GPIO_OUTPUT_TYPE (0x00000010u) + +#define GPIO_NUMBER (16u) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position); + GPIOx->OTYPER = temp; + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + temp |= ((GPIO_Init->Pull) << (position * 2u)); + GPIOx->PUPDR = temp; + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + temp = EXTI->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << (8u * (position & 0x03u))); + temp |= (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u))); + EXTI->EXTICR[position >> 2u] = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + temp |= iocurrent; + } + EXTI->IMR1 = temp; + + temp = EXTI->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + temp |= iocurrent; + } + EXTI->EMR1 = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = EXTI->EXTICR[position >> 2u]; + tmp &= (0x0FuL << (8u * (position & 0x03u))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR1 &= ~(iocurrent); + EXTI->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR1 &= ~(iocurrent); + EXTI->FTSR1 &= ~(iocurrent); + + tmp = 0x0FuL << (8u * (position & 0x03u)); + EXTI->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + } + + position++; + } +} + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00u) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the pin to be toggled. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_RISING_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_RISING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Rising_Callback(GPIO_Pin); + } + + if (__HAL_GPIO_EXTI_GET_FALLING_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Falling_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Rising_Callback could be implemented in the user file + */ +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Falling_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c new file mode 100644 index 0000000..bdfd1c4 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c @@ -0,0 +1,6613 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition, an then permit a call the same master sequential interface + several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT() + or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential + interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() + or using @ref HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT() + or using @ref HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can + add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). + (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT() + or using @ref HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT() + or using @ref HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + @ref HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + @ref HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + @ref HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + @ref HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback(). + [..] + Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit() + or @ref HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SlaveAddr_SHIFT 7U +#define SlaveAddr_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + hi2c->Instance->CR2 = (I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Normal use case for Transmitter mode */ + /* A NACK is generated to confirm the end of transfer */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + return HAL_ERROR; + } + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + + } + while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (I2C_Trials == Trials) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } + while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** +* @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. +* @retval I2C Error Code +*/ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +/** + * @brief This function handles I2C Communication Timeout. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + return HAL_OK; + } + else + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles Acknowledge failed detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Wait until STOP Flag is reset */ + /* AutoEnd should be initiate after AF */ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ + (hi2c->XferISR == I2C_Slave_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK, and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c new file mode 100644 index 0000000..c029d9c --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c @@ -0,0 +1,335 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32G0xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + (+) Configure Wake Up Feature + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c new file mode 100644 index 0000000..251bc3f --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c @@ -0,0 +1,2154 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_DRD_FS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ + +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + hpcd->IN_ep[i].tx_fifo_num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + (void)USB_DevInit(hpcd->Instance, hpcd->Init); + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; + + /* Activate LPM */ + if (hpcd->Init.lpm_enable == 1U) + { + (void)HAL_PCDEx_ActivateLPM(hpcd); + } + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callabck is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD BCD Callback + * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD BCD Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD BCD Callback + * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD LPM Callback + * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD LPM Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD LPM Callback + * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_ENABLE(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + + +/** + * @brief This function handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + (void)PCD_EP_ISR_Handler(hpcd); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + (void)HAL_PCD_SetAddress(hpcd, 0U); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) + { + hpcd->Instance->CNTR &= ~(USB_CNTR_SUSPRDY); + hpcd->Instance->CNTR &= ~(USB_CNTR_SUSPEN); + + if (hpcd->LPM_State == LPM_L1) + { + hpcd->LPM_State = LPM_L0; +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) + { + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + + hpcd->Instance->CNTR |= USB_CNTR_SUSPRDY; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /* Handle LPM Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_L1REQ)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_L1REQ); + if (hpcd->LPM_State == LPM_L0) + { + /* Force suspend and low-power mode before going to L1 state*/ + hpcd->Instance->CNTR |= USB_CNTR_SUSPRDY; + hpcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + hpcd->LPM_State = LPM_L1; + hpcd->BESL = ((uint32_t)hpcd->Instance->LPMCSR & USB_LPMCSR_BESL) >> 2; +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); + } +} + + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + if (ep->is_in != 0U) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_fill_db = 1U; + ep->xfer_len_db = len; + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(ep_addr); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) +{ + return hpcd->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ + + +/** + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + PCD_EPTypeDef *ep; + uint16_t count, wIstr, wEPVal, TxByteNbre; + uint8_t epindex; + + /* stay in loop while pending interrupts */ + while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) + { + wIstr = (uint16_t)hpcd->Instance->ISTR; + + /* extract highest priority endpoint number */ + epindex = (uint8_t)(wIstr & USB_ISTR_IDN); + + if (epindex == 0U) + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0U) + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + ep = &hpcd->IN_ep[0]; + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff += ep->xfer_count; + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, 0U); +#else + HAL_PCD_DataInStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) + { + hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); + hpcd->USB_Address = 0U; + } + } + else + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + wEPVal = (uint16_t)PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if ((wEPVal & USB_EP_SETUP) != 0U) + { + /* Get SETUP Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + ep->pmaadress, (uint16_t)ep->xfer_count); + + /* SETUP bit kept frozen while CTR_RX = 1 */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Process SETUP Packet*/ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else if ((wEPVal & USB_EP_VTRX) != 0U) + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Get Control Data OUT Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + ep->pmaadress, (uint16_t)ep->xfer_count); + + ep->xfer_buff += ep->xfer_count; + + /* Process Control Data OUT Packet */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, 0U); +#else + HAL_PCD_DataOutStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } + } + } + else + { + /* Decode and service non control endpoints interrupt */ + /* process related endpoint register */ + wEPVal = (uint16_t)PCD_GET_ENDPOINT(hpcd->Instance, epindex); + + if ((wEPVal & USB_EP_VTRX) != 0U) + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); + ep = &hpcd->OUT_ep[epindex]; + + /* OUT Single Buffering */ + if (ep->doublebuffer == 0U) + { + count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + } + } + else + { + /* manage double buffer bulk out */ + if (ep->type == EP_TYPE_BULK) + { + count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); + } + else /* manage double buffer iso out */ + { + /* free EP OUT Buffer */ + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + + if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) + { + /* read from endpoint BUF0Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /* read from endpoint BUF1Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + } + } + /* multi-packet on the NON control OUT endpoint */ + ep->xfer_count += count; + ep->xfer_buff += count; + + if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) + { + /* RX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataOutStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + (void) USB_EPStartXfer(hpcd->Instance, ep); + } + + } + + if ((wEPVal & USB_EP_VTTX) != 0U) + { + ep = &hpcd->IN_ep[epindex]; + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); + + /* Manage all non bulk transaction or Bulk Single Buffer Transaction */ + if ((ep->type != EP_TYPE_BULK) || + ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Transfer is not yet Done */ + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + } + /* bulk in double buffer enable in case of transferLen> Ep_Mps */ + else + { + (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); + } + } + } + } + + return HAL_OK; +} + + +/** + * @brief Manage double buffer bulk out transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint16_t count; + + /* Manage Buffer0 OUT */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + /* Get count of received Data on buffer0 */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK to OUT endpoint since double buffer is enabled */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /* Check if Buffer1 is in blocked state which requires to toggle */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + /* Manage Buffer 1 DTOG_RX=0 */ + else + { + /* Get count of received data */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK on the current endpoint */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /*Need to FreeUser Buffer*/ + if ((wEPVal & USB_EP_DTOG_TX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + + return count; +} + + +/** + * @brief Manage double buffer bulk IN transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint32_t len; + uint16_t TxByteNbre; + + /* Data Buffer0 ACK received */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + ep->xfer_fill_db = 0U; + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Write remaining Data to Buffer */ + /* Set the Double buffer counter for pma buffer1 */ + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); + } + } + } + else /* Data Buffer1 ACK received */ + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + /*need to Free USB Buff*/ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + ep->xfer_fill_db = 0; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy the user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); + } + } + } + + /*enable endpoint IN*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + + return HAL_OK; +} + + + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c new file mode 100644 index 0000000..63412e4 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c @@ -0,0 +1,336 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_DRD_FS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ + +/** + * @brief Configure PMA for EP + * @param hpcd Device instance + * @param ep_addr endpoint address + * @param ep_kind endpoint Kind + * USB_SNG_BUF: Single Buffer used + * USB_DBL_BUF: Double Buffer used + * @param pmaadress: EP address in The PMA: In case of single buffer endpoint + * this parameter is 16-bit value providing the address + * in PMA allocated to endpoint. + * In case of double buffer endpoint this parameter + * is a 32-bit value providing the endpoint buffer 0 address + * in the LSB part of 32-bit value and endpoint buffer 1 address + * in the MSB part of 32-bit value. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress) +{ + PCD_EPTypeDef *ep; + + /* initialize ep structure*/ + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + { + /* Single Buffer */ + ep->doublebuffer = 0U; + /* Configure the PMA */ + ep->pmaadress = (uint16_t)pmaadress; + } + else /* USB_DBL_BUF */ + { + /* Double Buffer Endpoint */ + ep->doublebuffer = 1U; + /* Configure the PMA */ + ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); + ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); + } + + return HAL_OK; +} + +/** + * @brief Activate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->battery_charging_active = 1U; + + /* Enable BCD feature */ + USBx->BCDR |= USB_BCDR_BCDEN; + + /* Enable DCD : Data Contact Detect */ + USBx->BCDR &= ~(USB_BCDR_PDEN); + USBx->BCDR &= ~(USB_BCDR_SDEN); + USBx->BCDR |= USB_BCDR_DCDEN; + + return HAL_OK; +} + +/** + * @brief Deactivate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->battery_charging_active = 0U; + + /* Disable BCD feature */ + USBx->BCDR &= ~(USB_BCDR_BCDEN); + + return HAL_OK; +} + +/** + * @brief Handle BatteryCharging Process. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + uint32_t tickstart = HAL_GetTick(); + + /* Wait Detect flag or a timeout is happen*/ + while ((USBx->BCDR & USB_BCDR_DCDET) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > 1000U) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + return; + } + } + + HAL_Delay(200U); + + /* Data Pin Contact ? Check Detect flag */ + if ((USBx->BCDR & USB_BCDR_DCDET) == USB_BCDR_DCDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + /* Primary detection: checks if connected to Standard Downstream Port + (without charging capability) */ + USBx->BCDR &= ~(USB_BCDR_DCDEN); + HAL_Delay(50U); + USBx->BCDR |= (USB_BCDR_PDEN); + HAL_Delay(50U); + + /* If Charger detect ? */ + if ((USBx->BCDR & USB_BCDR_PDET) == USB_BCDR_PDET) + { + /* Start secondary detection to check connection to Charging Downstream + Port or Dedicated Charging Port */ + USBx->BCDR &= ~(USB_BCDR_PDEN); + HAL_Delay(50U); + USBx->BCDR |= (USB_BCDR_SDEN); + HAL_Delay(50U); + + /* If CDP ? */ + if ((USBx->BCDR & USB_BCDR_SDET) == USB_BCDR_SDET) + { + /* Dedicated Downstream Port DCP */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Charging Downstream Port CDP */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else /* NO */ + { + /* Standard Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /* Battery Charging capability discovery finished Start Enumeration */ + (void)HAL_PCDEx_DeActivateBCD(hpcd); +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} + + +/** + * @brief Activate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) +{ + + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->lpm_active = 1U; + hpcd->LPM_State = LPM_L0; + + USBx->LPMCSR |= USB_LPMCSR_LMPEN; + USBx->LPMCSR |= USB_LPMCSR_LPMACK; + + return HAL_OK; +} + +/** + * @brief Deactivate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 0U; + + USBx->LPMCSR &= ~(USB_LPMCSR_LMPEN); + USBx->LPMCSR &= ~(USB_LPMCSR_LPMACK); + + return HAL_OK; +} + + + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c new file mode 100644 index 0000000..bd2bf99 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c @@ -0,0 +1,545 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Defines PWR Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset + values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + [..] + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pins are used to wakeup the system from Standby mode or + Shutdown mode. WakeUp pins polarity can be set to configure event + detection on high level (rising edge) or low level (falling edge). + + *** Low Power mode configuration *** + ===================================== + [..] + The devices feature 7 low-power modes: + (+) Low-power run mode: core and peripherals are running at low frequency. + Regulator is in low power mode. + (+) Sleep mode: Cortex-M0+ core stopped, peripherals kept running, + regulator is main mode. + (+) Low-power Sleep mode: Cortex-M0+ core stopped, peripherals kept running + and regulator in low power mode. + (+) Stop 0 mode: all clocks are stopped except LSI and LSE, regulator is + main mode. + (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator + off, low power regulator on. + (+) Standby mode: all clocks are stopped except LSI and LSE, regulator is + disable. + (+) Shutdown mode: all clocks are stopped except LSE, regulator is + disable. + + *** Low-power run mode *** + ========================== + [..] + (+) Entry: (from main run mode) + (++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after + having decreased the system clock below 2 MHz. + (+) Exit: + (++) clear LPR bit then wait for REGLPF bit to be reset with + HAL_PWREx_DisableLowPowerRunMode() API. Only then can the + system clock frequency be increased above 2 MHz. + + *** Sleep mode / Low-power sleep mode *** + ========================================= + [..] + (+) Entry: + The Sleep & Low-power Sleep modes are entered through + HAL_PWR_EnterSLEEPMode() API specifying whether or not the regulator + is forced to low-power mode and if exit is interrupt or event + triggered. + (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode). + (++) PWR_LOWPOWERREGULATOR_ON: Low-power Sleep mode (regulator in low + power mode). In this case, the system clock frequency must have + been decreased below 2 MHz beforehand. + (++) PWR_SLEEPENTRY_WFI: Core enters sleep mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: Core enters sleep mode with WFE instruction + (+) WFI Exit: + (++) Any interrupt enabled in nested vectored interrupt controller (NVIC) + (+) WFE Exit: + (++) Any wakeup event if cortex is configured with SEVONPEND = 0 + (++) Interrupt even when disabled in NVIC if cortex is configured with + SEVONPEND = 1 + [..] When exiting the Low-power Sleep mode by issuing an interrupt or a wakeup event, + the MCU is in Low-power Run mode. + + *** Stop 0 & Stop 1 modes *** + ============================= + [..] + (+) Entry: + The Stop modes are entered through the following APIs: + (++) HAL_PWR_EnterSTOPMode() with following settings: + (+++) PWR_MAINREGULATOR_ON to enter STOP0 mode. + (+++) PWR_LOWPOWERREGULATOR_ON to enter STOP1 mode. + (+) Exit (interrupt or event-triggered, specified when entering STOP mode): + (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction + (+) WFI Exit: + (++) Any EXTI line (internal or external) configured in interrupt mode + with corresponding interrupt enable in NVIC + (+) WFE Exit: + (++) Any EXTI line (internal or external) configured in event mode if + cortex is configured with SEVONPEND = 0 + (++) Any EXTI line configured in interrupt mode (even if the + corresponding EXTI Interrupt vector is disabled in the NVIC) if + cortex is configured with SEVONPEND = 0. The interrupt source can + be external interrupts or peripherals with wakeup capability. + [..] When exiting Stop, the MCU is either in Run mode or in Low-power Run mode + depending on the LPR bit setting. + + *** Standby mode *** + ==================== + [..] In Standby mode, it is possible to keep backup SRAM content (defined as + full SRAM) keeping low power regulator on. This is achievable by setting + Ram retention bit calling HAL_PWREx_EnableSRAMRetention API. This increases + power consumption. + Its also possible to define I/O states using APIs: + HAL_PWREx_EnableGPIOPullUp, HAL_PWREx_EnableGPIOPullDown & + HAL_PWREx_EnablePullUpPullDownConfig + (+) Entry: + (++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API, by + setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp), + tamper event (internal & external), LSE CSS detection, reset on + NRST pin, IWDG reset & BOR reset. + [..] Exiting Standby generates a power reset: Cortex is reset and execute + Reset handler vector, all registers in the Vcore domain are set to + their reset value. Registers outside the VCORE domain (RTC, WKUP, IWDG, + and Standby/Shutdown modes control) are not impacted. + + *** Shutdown mode *** + ====================== + [..] + In Shutdown mode, + voltage regulator is disabled, all clocks are off except LSE, RRS bit is + cleared. SRAM and registers contents are lost except for backup domain + registers. + (+) Entry: + (++) The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API, + by setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp), + tamper event (internal & external), LSE CSS detection, reset on + NRST pin. + [..] Exiting Shutdown generates a brown out reset: Cortex is reset and execute + Reset handler vector, all registers are set to their reset value but ones + in backup domain. + +@endverbatim + * @{ + */ + +/** + * @brief Enable access to the backup domain + * (RTC & TAMP registers, backup registers, RCC BDCR register). + * @note After reset, the backup domain is protected against + * possible unwanted write accesses. All RTC & TAMP registers (backup + * registers included) and RCC BDCR register are concerned. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + + +/** + * @brief Disable access to the backup domain + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values which set + * the default polarity i.e. detection on high level (rising edge): + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3(*), + * PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6 + * or one of the following value where the user can explicitly specify + * the enabled pin and the chosen polarity: + * @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW + * @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW + * @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW (*) + * @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW + * @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW (*) + * @arg @ref PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @note (*) availability depends on devices + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); + + /* Specifies the Wake-Up pin polarity for the event detection + (rising or falling edge) */ + MODIFY_REG(PWR->CR4, (PWR_CR4_WP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); + + /* Enable wake-up pin */ + SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity)); +} + + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2,PWR_WAKEUP_PIN3(*), + * PWR_WAKEUP_PIN4,PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6 + * @note (*) availability depends on devices + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx)); +} + + +/** + * @brief Enter Sleep or Low-power Sleep mode. + * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as + * in Run mode. + * @param Regulator Specifies the regulator state in Sleep/Low-power Sleep + * mode. This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator + * in low-power mode) + * @note Low-power Sleep mode is entered from Low-power Run mode only. In + * case Regulator parameter is set to Low Power but MCU is in Run mode, + * we will first enter in Low-power Run mode. Therefore, user should + * take care that HCLK frequency is less than 2 MHz. + * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. + * To switch back to Run mode, user must call + * HAL_PWREx_DisableLowPowerRunMode() API. + * @param SLEEPEntry Specifies if Sleep mode is entered with WFI or WFE + * instruction. This parameter can be one of the following values: + * @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep + * mode with WFI instruction + * @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep + * mode with WFE instruction + * @note When WFI entry is used, tick interrupt have to be disabled if not + * desired as the interrupt wake up source. + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Set Regulator parameter */ + if(Regulator != PWR_MAINREGULATOR_ON) + { + /* If in run mode, first move to low-power run mode. + The system clock frequency must be below 2 MHz at this point. */ + if((PWR->SR2 & PWR_SR2_REGLPF) == 0x00u) + { + HAL_PWREx_EnableLowPowerRunMode(); + } + } + else + { + /* If in low-power run mode at this point, exit it */ + if((PWR->SR2 & PWR_SR2_REGLPF) != 0x00u) + { + if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK) + { + return ; + } + } + } + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + + +/** + * @brief Enter Stop mode + * @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with + * legacy code running on devices where only "Stop mode" is mentioned + * with main or low power regulator ON. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the HSI and the + * HSE oscillators are disabled. Some peripherals with the wakeup + * capability can switch on the HSI to receive a frame, and switch off + * the HSI after receiving the frame if it is not a wakeup frame. + * SRAM and register contents are preserved. + * The BOR is available. + * The voltage regulator can be configured either in normal (Stop 0) or + * low-power mode (Stop 1). + * @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a + * wakeup event, the HSI RC oscillator is selected as system clock + * @note When the voltage regulator operates in low power mode (Stop 1), + * an additional startup delay is incurred when waking up. By keeping + * the internal regulator ON during Stop mode (Stop 0), the consumption + * is higher although the startup time is reduced. + * @param Regulator Specifies the regulator state in Stop mode + * This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power + * regulator ON) + * @param STOPEntry Specifies Stop 0 or Stop 1 mode is entered with WFI or + * WFE instruction. This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI + * instruction. + * @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE + * instruction. + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + if (Regulator != PWR_MAINREGULATOR_ON) + { + /* Stop mode with Low-Power Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP1); + } + else + { + /* Stop mode with Main Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP0); + } + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Standby mode. + * @note In Standby mode, the PLL, the HSI and the HSE oscillators are + * switched off. The voltage regulator is disabled. SRAM and register + * contents are lost except for registers in the Backup domain and + * Standby circuitry. BOR is available. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note Sram content can be kept setting RRS through HAL_PWREx_EnableSRAMRetention() + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Set Stand-by mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STANDBY); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + + /* Request Wait For Interrupt */ + __WFI(); +} + + +/** + * @brief Enable Sleep-On-Exit Cortex feature + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over returning to thread mode. Setting this bit is + * useful when the processor is expected to run only on interruptions + * handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disable Sleep-On-Exit Cortex feature + * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Enable Cortex Sev On Pending feature. + * @note Set SEVONPEND bit of SCR register. When this bit is set, enabled + * events and all interrupts, including disabled ones can wakeup + * processor from WFE. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disable Cortex Sev On Pending feature. + * @note Clear SEVONPEND bit of SCR register. When this bit is clear, only + * enable interrupts or events can wakeup processor from WFE + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c new file mode 100644 index 0000000..0f60295 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c @@ -0,0 +1,1019 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +#if defined(PWR_PVD_SUPPORT) +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT 0x00010000U /*!< Mask for interruption yielded + by PVD threshold crossing */ +#define PVD_MODE_EVT 0x00020000U /*!< Mask for event yielded + by PVD threshold crossing */ +#define PVD_RISING_EDGE 0x00000001U /*!< Mask for rising edge set as + PVD trigger */ +#define PVD_FALLING_EDGE 0x00000002U /*!< Mask for falling edge set as + PVD trigger */ +/** + * @} + */ +#endif + +/** @defgroup PWREx_TimeOut_Value PWREx Flag Setting Time Out Value + * @{ + */ +#define PWR_REGLPF_SETTING_DELAY_6_US 6u /*!< REGLPF should rise in about 5 us plus + 2 APB clock. Taking in account max Sysclk at + 2 MHz, and rounded to upper value */ + +#define PWR_VOSF_SETTING_DELAY_6_US 6u /*!< VOSF should rise in about 5 us plus + 2 APB clock. Taking in account max Sysclk at + 16 MHz, and rounded to upper value */ +/** + * @} + */ + +/** @defgroup PWREx_Gpio_Pin_Number PWREx Gpio Pin Number + * @{ + */ +#define PWR_GPIO_PIN_NB 16u /*!< Number of gpio pin in bank */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Initialization and de-initialization functions ##### + =============================================================================== + [..] + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PVDRT[2:0] & PVDFT[2:0] bits in + PWR CR2 register). + (+) PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line 16 and can generate an interrupt if enabled. + (+) The PVD is stopped in Standby & Shutdown mode. + + *** PVM configuration *** + ========================= + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Enable battery charging. + * @note When VDD is present, charge the external battery on VBAT through an + * internal resistor. + * @param ResistorSelection specifies the resistor impedance. + * This parameter can be one of the following values: + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_5 5 kOhms resistor + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_1_5 1.5 kOhms resistor + * @retval None + */ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection) +{ + uint32_t tmpreg; + assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorSelection)); + + /* Specify resistor selection and enable battery charging */ + tmpreg = (PWR->CR4 & ~PWR_CR4_VBRS); + PWR->CR4 = (tmpreg | ResistorSelection | PWR_CR4_VBE); +} + + +/** + * @brief Disable battery charging. + * @retval None + */ +void HAL_PWREx_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + +#if defined(PWR_CR3_ENB_ULP) +/** + * @brief Enable POR Monitor sampling mode. + * @note When entering ultra low power modes (standby, shutdown) this feature + * can be enabled to reduce further consumption: Power On Reset monitor + * is then set in sampling mode, and no more in always on mode. + * @retval None + */ +void HAL_PWREx_EnablePORMonitorSampling(void) +{ + PWR->CR3 |= PWR_CR3_ENB_ULP; +} + + +/** + * @brief Disable POR Monitor sampling mode. + * @retval None + */ +void HAL_PWREx_DisablePORMonitorSampling(void) +{ + PWR->CR3 &= ~PWR_CR3_ENB_ULP; +} +#endif + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Configure the Power Voltage Detector (PVD). + * @param sConfigPVD pointer to a PWR_PVDTypeDef structure that contains the + PVD configuration information: threshold levels, operating mode. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level. + * @note User should take care that rising threshold is higher than falling + * one in order to avoid having always PVDO output set. + * @retval HAL_OK + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PVD level bits only according to PVDLevel value */ + MODIFY_REG(PWR->CR2, (PWR_CR2_PVDFT | PWR_CR2_PVDRT), sConfigPVD->PVDLevel); + + /* Clear any previous config, in case no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } + + return HAL_OK; +} + + +/** + * @brief Enable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWREx_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + + +/** + * @brief Disable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWREx_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} +#endif + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Enable VDDUSB supply. + * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Disable VDDUSB supply. + * @retval None + */ +void HAL_PWREx_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} +#endif + +#if defined(PWR_CR2_IOSV) +/** + * @brief Enable VDDIO2 supply. + * @note Remove VDDIO2 electrical and logical isolation, once VDDIO2 supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + + +/** + * @brief Disable VDDIO2 supply. + * @retval None + */ +void HAL_PWREx_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} +#endif /* PWR_CR2_IOSV */ + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Enable the Power Voltage Monitoring for USB peripheral (power domain Vddio2) + * @retval None + */ +void HAL_PWREx_EnablePVMUSB(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_USB); +} + +/** + * @brief Disable the Power Voltage Monitoring for USB peripheral (power domain Vddio2) + * @retval None + */ +void HAL_PWREx_DisablePVMUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_USB); +} +#endif + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Configure the Peripheral Voltage Monitoring (PVM). + * @param sConfigPVM: pointer to a PWR_PVMTypeDef structure that contains the + * PVM configuration information. + * @note The API configures a single PVM according to the information contained + * in the input structure. To configure several PVMs, the API must be singly + * called for each PVM used. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level and to each monitored supply. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_PVM_TYPE(sConfigPVM->PVMType)); + assert_param(IS_PWR_PVM_MODE(sConfigPVM->Mode)); + + /* Configure EXTI 34 interrupts if so required: + scan through PVMType to detect which PVMx is set and + configure the corresponding EXTI line accordingly. */ + switch (sConfigPVM->PVMType) + { + case PWR_PVM_USB: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM_EXTI_DISABLE_IT(); + __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); + } + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif +/** + * @brief Enable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_EnableInternalWakeUpLine(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Disable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_DisableInternalWakeUpLine(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes. + * @note Set the relevant PUy bit of PWR_PUCRx register to configure the I/O in + * pull-up state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PDy bit of PWR_PDCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PUCRB, GPIONumber); + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PUCRC, GPIONumber); + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; + + case PWR_GPIO_D: + SET_BIT(PWR->PUCRD, GPIONumber); + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; + +#if defined(GPI0E) + case PWR_GPIO_E: + SET_BIT(PWR->PUCRE, GPIONumber); + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + SET_BIT(PWR->PUCRF, GPIONumber); + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-up state in Standby mode and Shutdown modes. + * @note Reset the relevant PUy bit of PWR_PUCRx register used to configure the I/O + * in pull-up state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; + + case PWR_GPIO_D: + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; + +#if defined(GPI0E) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes. + * @note Set the relevant PDy bit of PWR_PDCRx register to configure the I/O in + * pull-down state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PUy bit of PWR_PUCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PDCRB, GPIONumber); + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PDCRC, GPIONumber); + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; + + case PWR_GPIO_D: + SET_BIT(PWR->PDCRD, GPIONumber); + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; + +#if defined(GPIOE) + case PWR_GPIO_E: + SET_BIT(PWR->PDCRE, GPIONumber); + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + SET_BIT(PWR->PDCRF, GPIONumber); + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes. + * @note Reset the relevant PDy bit of PWR_PDCRx register used to configure the I/O + * in pull-down state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; + + case PWR_GPIO_D: + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; + +#if defined(GPIOE) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are applied in Standby and Shutdown modes. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding + * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() APIs ensure there + * is no conflict when setting PUy or PDy bit. + * @retval None + */ +void HAL_PWREx_EnablePullUpPullDownConfig(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are not applied in Standby and Shutdown modes. + * @retval None + */ +void HAL_PWREx_DisablePullUpPullDownConfig(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + +#if defined(PWR_CR3_RRS) +/** + * @brief Enable SRAM content retention in Standby mode. + * @note When RRS bit is set, SRAM is powered by the low-power regulator in + * Standby mode and its content is kept. + * @retval None + */ +void HAL_PWREx_EnableSRAMRetention(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_RRS); +} + + +/** + * @brief Disable SRAM content retention in Standby mode. + * @note When RRS bit is reset, SRAM is powered off in Standby mode + * and its content is lost. + * @retval None + */ +void HAL_PWREx_DisableSRAMRetention(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); +} +#endif + +/** + * @brief Enable Flash Power Down. + * @note This API allows to enable flash power down capabilities in low power + * run, low power sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_LPRUN + * @arg @ref PWR_FLASHPD_LPSLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 |= PowerMode; +} + + +/** + * @brief Disable Flash Power Down. + * @note This API allows to disable flash power down capabilities in low power + * run, low power sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_LPRUN + * @arg @ref PWR_FLASHPD_LPSLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 &= ~PowerMode; +} + + +/** + * @brief Return Voltage Scaling Range. + * @retval VOS bit field: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ + return (PWR->CR1 & PWR_CR1_VOS); +} + + +/** + * @brief Configure the main regulator output voltage. + * @param VoltageScaling specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, + * typical output voltage at 1.2 V, + * system frequency up to 64 MHz. + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, + * typical output voltage at 1.0 V, + * system frequency up to 16 MHz. + * @note When moving from Range 1 to Range 2, the system frequency must be decreased to + * a value below 16 MHz before calling HAL_PWREx_ControlVoltageScaling() API. + * When moving from Range 2 to Range 1, the system frequency can be increased to + * a value up to 64 MHz after calling HAL_PWREx_ControlVoltageScaling() API. + * @note When moving from Range 2 to Range 1, the API waits for VOSF flag to be + * cleared before returning the status. If the flag is not cleared within + * 6 microseconds, HAL_TIMEOUT status is reported. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t wait_loop_index; + + assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); + + /* Modify voltage scaling range */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling); + + /* In case of Range 1 selected, we need to ensure that main regulator reaches new value */ + if(VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + { + /* Set timeout value */ + wait_loop_index = ((PWR_VOSF_SETTING_DELAY_6_US * SystemCoreClock ) / 1000000U) + 1U; + + /* Wait until VOSF is reset */ + while(HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + if(wait_loop_index != 0U) + { + wait_loop_index--; + } + else + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + + + +/** + * @brief Enter Low-power Run mode + * @note System clock frequency has to be decreased below 2 MHz before entering + * low power run mode + * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode. + * @retval None + */ +void HAL_PWREx_EnableLowPowerRunMode(void) +{ + /* Set Regulator parameter */ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + + +/** + * @brief Exit Low-power Run mode. + * @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that + * REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode + * returns HAL_TIMEOUT status). The system clock frequency can then be + * increased above 2 MHz. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) +{ + uint32_t wait_loop_index = ((PWR_REGLPF_SETTING_DELAY_6_US * SystemCoreClock ) / 1000000U) + 1U; + + /* Clear LPR bit */ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); + + /* Wait until REGLPF is reset */ + while(HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) + { + if(wait_loop_index != 0U) + { + wait_loop_index--; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + + +#if defined(PWR_SHDW_SUPPORT) +/** + * @brief Enter Shutdown mode. + * @note In Shutdown mode, the PLL, the HSI, the LSI and the HSE oscillators are switched + * off. The voltage regulator is disabled and Vcore domain is powered off. + * SRAM and registers contents are lost except for registers in the Backup domain. + * The BOR is not available. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @retval None + + * @retval None + */ +void HAL_PWREx_EnterSHUTDOWNMode(void) +{ + /* Set Shutdown mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_SHUTDOWN); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + + /* Request Wait For Interrupt */ + __WFI(); +} +#endif + +#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT) +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_PVM_IRQHandler(void) +{ + /* Check PWR PVD exti Rising flag */ + if(__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD interrupt rising user callback */ + HAL_PWREx_PVD_PVM_Rising_Callback(); + } + + /* Check PWR exti fallling flag */ + if(__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVD interrupt falling user callback */ + HAL_PWREx_PVD_PVM_Falling_Callback(); + } + + /* Check PWR PVM exti Rising flag */ + if(__HAL_PWR_PVM_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVM exti pending bit */ + __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD PVM interrupt rising user callback */ + HAL_PWREx_PVD_PVM_Rising_Callback(); + } + + /* Check PWR PVM exti fallling flag */ + if(__HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVM exti pending bit */ + __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVM interrupt falling user callback */ + HAL_PWREx_PVD_PVM_Falling_Callback(); + } +} + +/** + * @brief PWR PVD interrupt rising callback + * @retval None + */ +__weak void HAL_PWREx_PVD_PVM_Rising_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Rising_Callback can be implemented in the user file + */ +} + +/** + * @brief PWR PVD interrupt Falling callback + * @retval None + */ +__weak void HAL_PWREx_PVD_PVM_Falling_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Falling_Callback can be implemented in the user file + */ +} +#elif defined(PWR_PVD_SUPPORT) +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_IRQHandler(void) +{ + /* Check PWR exti Rising flag */ + if(__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD interrupt rising user callback */ + HAL_PWREx_PVD_Rising_Callback(); + } + + /* Check PWR exti fallling flag */ + if(__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVD interrupt falling user callback */ + HAL_PWREx_PVD_Falling_Callback(); + } +} + +/** + * @brief PWR PVD interrupt rising callback + * @retval None + */ +__weak void HAL_PWREx_PVD_Rising_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Rising_Callback can be implemented in the user file + */ +} + +/** + * @brief PWR PVD interrupt Falling callback + * @retval None + */ +__weak void HAL_PWREx_PVD_Falling_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Falling_Callback can be implemented in the user file + */ +} + +#endif + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c new file mode 100644 index 0000000..36a6bf0 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c @@ -0,0 +1,1437 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from High Speed Internal oscillator + (from 8 MHz to reach 16MHz) with Flash 0 wait state. Flash prefetch buffer, + D-Cache and I-Cache are disabled, and all peripherals are off except internal + SRAM, Flash and JTAG. + + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses: + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analog mode, except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (RTC, ADC, RNG, HSTIM) + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ + +#if defined(RCC_HSI48_SUPPORT) +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#endif /* RCC_HSI48_SUPPORT */ +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ + +#define PLLSOURCE_NONE (0U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +#if defined(RCC_MCO2_SUPPORT) +#define MCO2_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO2_GPIO_PORT GPIOA +#define MCO2_PIN GPIO_PIN_10 +#endif /* RCC_MCO2_SUPPORT */ + +#define RCC_PLL_OSCSOURCE_CONFIG(__HAL_RCC_PLLSOURCE__) \ + (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (uint32_t)(__HAL_RCC_PLLSOURCE__))) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal and external oscillators + (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB) + + [..] Internal/external clock and PLL configuration + (+) HSI (high-speed internal): 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + + (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (+) HSE (high-speed external): 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also optionally as RTC clock source. + + (+) LSE (low-speed external): 32.768 KHz oscillator used optionally as RTC clock source. + + (+) PLL (clocked by HSI, HSE) providing up to three independent output clocks: + (++) The first output (R) is used to generate the high speed system clock (up to 64MHz). + (++) The second output(Q) is used to generate the clock for the random analog generator and HStim. + (++) The Third output (P) is used to generate the clock for the Analog to Digital Converter and I2S. + + (+) CSS (Clock security system): once enabled, if a HSE or LSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched respectively to HSI or LSI and an interrupt is generated + if enabled. The interrupt is linked to the Cortex-M0+ NMI (Non-Maskable Interrupt) + exception vector. + + (+) MCOx (microcontroller clock output): + (++) MCO1 used to output LSI, HSI48(*), HSI, LSE, HSE or main PLL clock (through a configurable prescaler) on PA8 pin. + (++) MCO2(*) used to output LSI, HSI48(*), HSI, LSE, HSE, main PLLR clock, PLLQ clock, PLLP clock, RTC clock or RTC_Wakeup (through a configurable prescaler) on PA10 pin. + (*) available on certain devices only + + [..] System, AHB and APB buses clocks configuration + (+) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE, LSI, LSE and main PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...).and APB (PCLK1) clock is derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + + (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 31. + You have to use @ref __HAL_RCC_RTC_ENABLE() and @ref HAL_RCCEx_PeriphCLKConfig() function + to configure this clock. + + (+@) RNG(*) requires a frequency equal or lower than 48 MHz. + This clock is derived from the main PLL or HSI or System clock. + (*) available on certain devices only + + (+@) IWDG clock which is always the LSI clock. + + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK is 64 MHz. + Depending on the device voltage range, the maximum frequency should be + adapted accordingly. + + @endverbatim + + (++) Table 1. HCLK clock frequency. + (++) +-------------------------------------------------------+ + (++) | Latency | HCLK clock frequency (MHz) | + (++) | |-------------------------------------| + (++) | | voltage range 1 | voltage range 2 | + (++) | | 1.2 V | 1.0 V | + (++) |-----------------|------------------|------------------| + (++) |0WS(1 CPU cycles)| HCLK <= 24 | HCLK <= 8 | + (++) |-----------------|------------------|------------------| + (++) |1WS(2 CPU cycles)| HCLK <= 48 | HCLK <= 16 | + (++) |-----------------|------------------|------------------| + (++) |2WS(3 CPU cycles)| HCLK <= 64 | - | + (++) |-----------------|------------------|------------------| + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL OFF + * - AHB and APB prescaler set to 1. + * - CSS, MCO1 OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Set HSION bit to the reset value */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[6:0] bits to the reset value */ + RCC->ICSCR = RCC_ICSCR_HSITRIM_6; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Reset CFGR register (HSI is selected as system clock source) */ + RCC->CFGR = 0x00000000u; + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Clear CR register in 2 steps: first to clear HSEON in case bypass was enabled */ + RCC->CR = RCC_CR_HSION; + + /* Then again to HSEBYP in case bypass was enabled */ + RCC->CR = RCC_CR_HSION; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* once PLL is OFF, reset PLLCFGR register to default value */ + RCC->PLLCFGR = RCC_PLLCFGR_PLLN_4; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000u; + + /* Clear all flags */ + RCC->CICR = 0xFFFFFFFFu; + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Initialize the RCC Oscillators according to the specified parameters in the + * @ref RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to a @ref RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this function. User should request a transition to HSE Off + * first and then to HSE On or HSE Bypass. + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this function. User should request a transition to LSE Off + * first and then to LSE On or LSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t temp_sysclksrc; + uint32_t temp_pllckcfg; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE(); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSE)) || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSE)) + { + if ((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + assert_param(IS_RCC_HSIDIV(RCC_OscInitStruct->HSIDiv)); + + /* Check if HSI16 is used as system clock or as PLL source when PLL is selected as system clock */ + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE(); + if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSI)) || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI)) + { + /* When HSI is used as system clock or as PLL input clock it can not be disabled */ + if ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + + if (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI) + { + /* Adjust the HSI16 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Update the SystemCoreClock global variable with HSISYS value */ + SystemCoreClock = (HSI_VALUE / (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos))); + } + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + } + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Configure the HSI16 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Enable the Internal High Speed oscillator (HSI16). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI16). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check if LSI is used as system clock */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSI) + { + /* When LSI is used as system clock it will not be disabled */ + if ((((RCC->CSR) & RCC_CSR_LSIRDY) != 0U) && (RCC_OscInitStruct->LSIState == RCC_LSI_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* When the LSE is used as system clock, it is not allowed disable it */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSE) + { + if ((((RCC->BDCR) & RCC_BDCR_LSERDY) != 0U) && (RCC_OscInitStruct->LSEState == RCC_LSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED() != 0U) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + } +#if defined(RCC_HSI48_SUPPORT) + /*------------------------------ HSI48 Configuration -----------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the LSI State */ + if (RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } +#endif /* RCC_HSI48_SUPPORT */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + + if (RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if (RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); +#if defined(RCC_PLLQ_SUPPORT) + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); +#endif /* RCC_PLLQ_SUPPORT */ + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, +#if defined(RCC_PLLQ_SUPPORT) + RCC_OscInitStruct->PLL.PLLQ, +#endif /* RCC_PLLQ_SUPPORT */ + RCC_OscInitStruct->PLL.PLLR); + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLLR Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLRCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Disable all PLL outputs to save power */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSOURCE_NONE); + +#if defined(RCC_PLLQ_SUPPORT) + __HAL_RCC_PLLCLKOUT_DISABLE(RCC_PLLCFGR_PLLPEN | RCC_PLLCFGR_PLLQEN | RCC_PLLCFGR_PLLREN); +#else + __HAL_RCC_PLLCLKOUT_DISABLE(RCC_PLLCFGR_PLLPEN | RCC_PLLCFGR_PLLREN); +#endif /* RCC_PLLQ_SUPPORT */ + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + temp_pllckcfg = RCC->PLLCFGR; + if ((READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLP) != RCC_OscInitStruct->PLL.PLLP) || +#if defined (RCC_PLLQ_SUPPORT) + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLQ) != RCC_OscInitStruct->PLL.PLLQ) || +#endif /* RCC_PLLQ_SUPPORT */ + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLR) != RCC_OscInitStruct->PLL.PLLR)) + { + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Initialize the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to a @ref RCC_ClkInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * This parameter can be one of the following values: + * @arg FLASH_LATENCY_0 FLASH 0 Latency cycle + * @arg FLASH_LATENCY_1 FLASH 1 Latency cycle + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used by default as system clock source after + * startup from Reset, wake-up from STANDBY mode. After restart from Reset, + * the HSI frequency is set to 8 Mhz, then it reaches its default value 16 MHz. + * + * @note The HSI can be selected as system clock source after + * from STOP modes or in case of failure of the HSE used directly or indirectly + * as system clock (if the Clock Security System CSS is enabled). + * + * @note The LSI can be selected as system clock source after + * in case of failure of the LSE used directly or indirectly + * as system clock (if the Clock Security System LSECSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source is ready. + * + * @note You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the FLASH clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI) + { + /* Check the HSI ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_LSI) + { + /* Check the LSI ready flag */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSE is selected as System Clock Source */ + else + { + /* Check the LSE ready flag */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + return HAL_ERROR; + } + } + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = (HAL_RCC_GetSysClockFreq() >> ((AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) & 0x1FU)); + + /* Configure the source of time base considering new system clocks settings*/ + return HAL_InitTick(uwTickPrio); +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to: + + (+) Output clock to MCO pin. + (+) Retrieve current clock frequencies. + (+) Enable the Clock Security System. + +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on MCO1 pin(PA8) or MC02 pin (PA10)(*). + * @note PA8, PA10(*) should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * For STM32G0xx family this parameter can have only one value: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @arg @ref RCC_MCO2 Clock source to output on MCO2 pin(PA10)(*). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled, no clock on MCO + * @arg @ref RCC_MCO1SOURCE_SYSCLK system clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48(*) + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee + * @arg @ref RCC_MCO1SOURCE_PLLCLK main PLLR clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_Wakeup selected as MCO1 source(*) + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled, no clock on MCO2(*) + * @arg @ref RCC_MCO2SOURCE_SYSCLK system clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_HSI48 HSI48 clock selected as MCO2 source for devices with HSI48(*) + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLCLK main PLLR clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLPCLK PLLP clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLQCLK PLLQ clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_RTCCLK RTC clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_RTC_WKUP RTC_Wakeup selected as MCO2 source(*) + * @param RCC_MCODiv specifies the MCO prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock + * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock + * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock + * @arg @ref RCC_MCO2DIV_1 no division applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_2 division by 2 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_4 division by 4 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_8 division by 8 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_16 division by 16 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_32 division by 32 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_64 division by 64 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_128 division by 128 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_256 division by 256 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_512 division by 512 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_1024 division by 1024 applied to MCO2 clock(*) + * + * (*) Feature not available on all devices of the family + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + + /* Common GPIO init parameters */ + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + + if (RCC_MCOx == RCC_MCO1) + { + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), (RCC_MCOSource | RCC_MCODiv)); + } +#if defined(RCC_MCO2_SUPPORT) + else if (RCC_MCOx == RCC_MCO2) + { + assert_param(IS_RCC_MCO2DIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + /* MCO2 Clock Enable */ + MCO2_CLK_ENABLE(); + /* Configure the MCO2 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO2_PIN; + GPIO_InitStruct.Alternate = GPIO_AF3_MCO2; + HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE), (RCC_MCOSource | RCC_MCODiv)); + } +#endif /* RCC_MCO2_SUPPORT */ +} + +/** + * @brief Return the SYSCLK frequency. + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE/HSIDIV(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**), + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note If SYSCLK source is LSI, function returns values based on LSI_VALUE(***) + * @note If SYSCLK source is LSE, function returns values based on LSE_VALUE(****) + * @note (*) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note (***) LSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 32768 Hz). + * @note (****) LSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 32000 Hz). + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllvco, pllsource, pllr, pllm, hsidiv; + uint32_t sysclockfreq; + + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + { + /* HSISYS can be derived for HSI16 */ + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + + /* HSI used as system clock source */ + sysclockfreq = (HSI_VALUE / hsidiv); + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + { + /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + /* PLL used as system clock source */ + + /* PLL_VCO = ((HSE_VALUE or HSI_VALUE)/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + + switch (pllsource) + { + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + break; + + case RCC_PLLSOURCE_HSI: /* HSI16 used as PLL clock source */ + default: /* HSI16 used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) ; + break; + } + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U); + sysclockfreq = pllvco / pllr; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSE) + { + /* LSE used as system clock source */ + sysclockfreq = LSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSI) + { + /* LSI used as system clock source */ + sysclockfreq = LSI_VALUE; + } + else + { + sysclockfreq = 0U; + } + + return sysclockfreq; +} + +/** + * @brief Return the HCLK frequency. + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Return the PCLK1 frequency. + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return ((uint32_t)(__LL_RCC_CALC_PCLK1_FREQ(HAL_RCC_GetHCLKFreq(), LL_RCC_GetAPB1Prescaler()))); +} + +/** + * @brief Configure the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; +#else + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the HSE configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = ((RCC->ICSCR & RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); + RCC_OscInitStruct->HSIDiv = ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos); + + /* Get the LSE configuration -----------------------------------------------*/ + if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + +#if defined(RCC_HSI48_SUPPORT) + /* Get the HSI48 configuration ---------------------------------------------*/ + if (READ_BIT(RCC->CR, RCC_CR_HSI48ON) == RCC_CR_HSI48ON) + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; + } + else + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; + } +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the PLL configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (RCC->PLLCFGR & RCC_PLLCFGR_PLLM); + RCC_OscInitStruct->PLL.PLLN = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + RCC_OscInitStruct->PLL.PLLP = (RCC->PLLCFGR & RCC_PLLCFGR_PLLP); +#if defined(RCC_PLLQ_SUPPORT) + RCC_OscInitStruct->PLL.PLLQ = (RCC->PLLCFGR & RCC_PLLCFGR_PLLQ); +#endif /* RCC_PLLQ_SUPPORT */ + RCC_OscInitStruct->PLL.PLLR = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR); +} + +/** + * @brief Configure the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct Pointer to a @ref RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != (void *)NULL); + assert_param(pFLatency != (void *)NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE); + + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief Enable the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The Clock Security System can only be cleared by reset. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Enable the LSE Clock Security System. + * @note If a failure is detected on the LSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The LSE Clock Security System Detection bit (LSECSSD in BDCR) can only be + * cleared by a backup domain reset. + * @retval None + */ +void HAL_RCC_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Disable the LSE Clock Security System. + * @note After LSE failure detection, the software must disable LSECSSON + * @note The Clock Security System can only be cleared by reset otherwise. + * @retval None + */ +void HAL_RCC_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Handle the RCC Clock Security System interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + uint32_t itflag = RCC->CIFR; + + /* Clear interrupt flags related to CSS */ + RCC->CICR = (itflag & (RCC_CIFR_CSSF | RCC_CIFR_LSECSSF)); + + /* Check RCC CSSF interrupt flag */ + if ((itflag & RCC_CIFR_CSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + } + + /* Check RCC LSECSSF interrupt flag */ + if ((itflag & RCC_CIFR_LSECSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_LSECSSCallback(); + } +} + +/** + * @brief Handle the RCC HSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCC_CSSCallback should be implemented in the user file + */ +} + +/** + * @brief RCC LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_LSECSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_LSECSSCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c new file mode 100644 index 0000000..5a734da --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c @@ -0,0 +1,1682 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extended peripheral: + * + Extended Peripheral Control functions + * + Extended Clock management functions + * + Extended Clock Recovery System Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +#define PLL_TIMEOUT_VALUE 100U /* 100 ms (minimum Tick + 1) */ + +#define LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO_GPIO_PORT GPIOA +#define LSCO_PIN GPIO_PIN_2 +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initialize the RCC extended peripherals clocks according to the specified + * parameters in the @ref RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to a @ref RCC_PeriphCLKInitTypeDef structure that + * contains a field PeriphClockSelection which can be a combination of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART2 LPUART2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_FDCAN FDCAN peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (1) + * + * @note (1) Peripherals are not available on all devices + * @note (2) Peripherals clock selection is not available on all devices + * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source: in this case the access to Backup domain is enabled. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpregister; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*-------------------------- RTC clock source configuration ----------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + FlagStatus pwrclkchanged = RESET; + + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if (ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ + tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); + + /* Reset the Backup domain only if the RTC Clock source selection is modified */ + if ((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpregister; + } + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + /* Apply new RTC clock source selection */ + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*-------------------------- USART1 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + +#if defined(RCC_CCIPR_USART2SEL) + /*-------------------------- USART2 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + /*-------------------------- USART3 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) + /*-------------------------- LPUART1 clock source configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); + + /* Configure the LPUART1 clock source */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } +#endif /* LPUART1 */ + +#if defined(LPUART2) + /*-------------------------- LPUART2 clock source configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART2CLKSOURCE(PeriphClkInit->Lpuart2ClockSelection)); + + /* Configure the LPUART clock source */ + __HAL_RCC_LPUART2_CONFIG(PeriphClkInit->Lpuart2ClockSelection); + } +#endif /* LPUART2 */ + +#if defined(RCC_CCIPR_LPTIM1SEL) + /*-------------------------- LPTIM1 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) + { + assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) + /*-------------------------- LPTIM2 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) + { + assert_param(IS_RCC_LPTIM2CLKSOURCE(PeriphClkInit->Lptim2ClockSelection)); + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } +#endif /* RCC_CCIPR_LPTIM2SEL */ + + /*-------------------------- I2C1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(RCC_CCIPR_I2C2SEL) + /*-------------------------- I2C2 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); + + /* Configure the I2C2 clock source */ + __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); + } +#endif /* (RCC_CCIPR_I2C2SEL */ + +#if defined(RNG) + /*-------------------------- RNG clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) + { + assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + + if (PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RNG */ + /*-------------------------- ADC clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC interface clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + + if (PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLADC) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } + +#if defined(CEC) + /*-------------------------- CEC clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } +#endif /* CEC */ + +#if defined(RCC_CCIPR_TIM1SEL) + /*-------------------------- TIM1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM1CLKSOURCE(PeriphClkInit->Tim1ClockSelection)); + + /* Configure the TIM1 clock source */ + __HAL_RCC_TIM1_CONFIG(PeriphClkInit->Tim1ClockSelection); + + if (PeriphClkInit->Tim1ClockSelection == RCC_TIM1CLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) + /*-------------------------- TIM15 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection)); + + /* Configure the TIM15 clock source */ + __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection); + + if (PeriphClkInit->Tim15ClockSelection == RCC_TIM15CLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RCC_CCIPR_TIM15SEL */ + + /*-------------------------- I2S1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S1CLKSOURCE(PeriphClkInit->I2s1ClockSelection)); + + /* Configure the I2S1 clock source */ + __HAL_RCC_I2S1_CONFIG(PeriphClkInit->I2s1ClockSelection); + + if (PeriphClkInit->I2s1ClockSelection == RCC_I2S1CLKSOURCE_PLL) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } + +#if defined(RCC_CCIPR2_I2S2SEL) + /*-------------------------- I2S2 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection)); + + /* Configure the I2S2 clock source */ + __HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection); + + if (PeriphClkInit->I2s2ClockSelection == RCC_I2S2CLKSOURCE_PLL) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + /*-------------------------- USB clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + + if (PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(FDCAN1) || defined(FDCAN2) + /*-------------------------- FDCAN clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) + { + /* Check the parameters */ + assert_param(IS_RCC_FDCANCLKSOURCE(PeriphClkInit->FdcanClockSelection)); + + /* Configure the FDCAN clock source */ + __HAL_RCC_FDCAN_CONFIG(PeriphClkInit->FdcanClockSelection); + + if (PeriphClkInit->FdcanClockSelection == RCC_FDCANCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* FDCAN1 || FDCAN2 */ + + return status; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals + * clocks: I2C1, I2S1, USART1, RTC, ADC, + * LPTIM1 (1), LPTIM2 (1), TIM1 (2), TIM15 (1)(2), USART2 (2), LPUART1 (1), CEC (1) and RNG (1) + * @note (1) Peripheral is not available on all devices + * @note (2) Peripheral clock selection is not available on all devices + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2S1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC ; + +#if defined(RCC_CCIPR_LPTIM1SEL) && defined(RCC_CCIPR_LPTIM2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_LPTIM1; +#endif /* RCC_CCIPR_LPTIM1SEL && RCC_CCIPR_LPTIM2SEL */ +#if defined(RCC_CCIPR_RNGSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_RNG; +#endif /* RCC_CCIPR_RNGSEL */ +#if defined(RCC_CCIPR_LPUART1SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPUART1; +#endif /* RCC_CCIPR_LPUART1SEL */ +#if defined(RCC_CCIPR_LPUART2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPUART2; +#endif /* RCC_CCIPR_LPUART2SEL */ +#if defined(RCC_CCIPR_CECSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC; +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR_TIM1SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM1; +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM15; +#endif /* RCC_CCIPR_TIM15SEL */ +#if defined(RCC_CCIPR_USART2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART2; +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART3; +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(RCC_CCIPR_I2C2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C2; +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR2_I2S2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; +#endif /* RCC_CCIPR2_I2S2SEL */ +#if defined(RCC_CCIPR2_USBSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(RCC_CCIPR2_FDCANSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_FDCAN; +#endif /* RCC_CCIPR_FDCANSEL */ + /* Get the USART1 clock source ---------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); +#if defined(RCC_CCIPR_USART2SEL) + /* Get the USART2 clock source ---------------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + /* Get the USART3 clock source ---------------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(RCC_CCIPR_LPUART1SEL) + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); +#endif /* RCC_CCIPR_LPUART1SEL */ +#if defined(RCC_CCIPR_LPUART2SEL) + /* Get the LPUART2 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart2ClockSelection = __HAL_RCC_GET_LPUART2_SOURCE(); +#endif /* RCC_CCIPR_LPUART2SEL */ + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#if defined(RCC_CCIPR_I2C2SEL) + /* Get the I2C2 clock source -----------------------------------------------*/ + PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); +#endif /* RCC_CCIPR_LPTIM2SEL */ +#if defined(RCC_CCIPR_TIM1SEL) + /* Get the TIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Tim1ClockSelection = __HAL_RCC_GET_TIM1_SOURCE(); +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + /* Get the TIM15 clock source ---------------------------------------------*/ + PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE(); +#endif /* RCC_CCIPR_TIM15SEL */ + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); +#if defined(RCC_CCIPR_RNGSEL) + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); +#endif /* RCC_CCIPR_RNGSEL */ + /* Get the ADC clock source -----------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); +#if defined(RCC_CCIPR_CECSEL) + /* Get the CEC clock source -----------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR2_USBSEL) + /* Get the USB clock source -----------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(RCC_CCIPR2_FDCANSEL) + /* Get the FDCAN clock source -----------------------------------------------*/ + PeriphClkInit->FdcanClockSelection = __HAL_RCC_GET_FDCAN_SOURCE(); +#endif /* RCC_CCIPR2_FDCANSEL */ + /* Get the I2S1 clock source -----------------------------------------------*/ + PeriphClkInit->I2s1ClockSelection = __HAL_RCC_GET_I2S1_SOURCE(); +#if defined(RCC_CCIPR2_I2S2SEL) + /* Get the I2S2 clock source -----------------------------------------------*/ + PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE(); +#endif /* RCC_CCIPR2_I2S2SEL */ +} + +/** + * @brief Return the peripheral clock frequency for peripherals with clock source from PLL + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock(1) + * @arg @ref RCC_PERIPHCLK_LPUART2 LPUART2 peripheral clock(1) + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_FDCAN FDCAN peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (1) + * @note (1) Peripheral not available on all devices + * @note (2) Peripheral Clock configuration not available on all devices + * @retval Frequency in Hz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency = 0U; + uint32_t srcclk; + uint32_t pllvco; + uint32_t plln; +#if defined(RCC_CCIPR_RNGSEL) + uint32_t rngclk; + uint32_t rngdiv; +#endif /* RCC_CCIPR_RNGSEL */ + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + if (PeriphClk == RCC_PERIPHCLK_RTC) + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + /* Check if LSE is ready and if RTC clock selection is LSE */ + if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_RTCCLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready and if RTC clock selection is LSI */ + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_RTCCLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/ + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_RTCCLKSOURCE_HSE_DIV32)) + { + frequency = HSE_VALUE / 32U; + } + /* Clock not enabled for RTC*/ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + } + else + { + /* Other external peripheral clock source than RTC */ + + /* Compute PLL clock input */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI) /* HSI ? */ + { + pllvco = HSI_VALUE; + } + else if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) /* HSE ? */ + { + pllvco = HSE_VALUE; + } + else /* No source */ + { + pllvco = 0U; + } + + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + + switch (PeriphClk) + { +#if defined(RCC_CCIPR_RNGSEL) + case RCC_PERIPHCLK_RNG: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGSEL); + if (srcclk == RCC_RNGCLKSOURCE_HSI_DIV8) /* HSI_DIV8 ? */ + { + rngclk = HSI_VALUE / 8U; + } + else if (srcclk == RCC_RNGCLKSOURCE_PLL) /* PLL ? */ + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + rngclk = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + else if (srcclk == RCC_RNGCLKSOURCE_SYSCLK) /* SYSCLK ? */ + { + rngclk = HAL_RCC_GetSysClockFreq(); + } + else /* No clock source */ + { + rngclk = 0U; + } + + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + frequency = (rngclk / rngdiv); + + break; +#endif /* RCC_CCIPR_RNGSEL */ + case RCC_PERIPHCLK_USART1: + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + if (srcclk == RCC_USART1CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK) /* SYSCLK ? */ + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#if defined(RCC_CCIPR_USART2SEL) + case RCC_PERIPHCLK_USART2: + /* Get the current USART2 source */ + srcclk = __HAL_RCC_GET_USART2_SOURCE(); + + if (srcclk == RCC_USART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + case RCC_PERIPHCLK_USART3: + /* Get the current USART3 source */ + srcclk = __HAL_RCC_GET_USART3_SOURCE(); + + if (srcclk == RCC_USART3CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART3CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART3CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART3 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(RCC_CCIPR_CECSEL) + case RCC_PERIPHCLK_CEC: + /* Get the current CEC source */ + srcclk = __HAL_RCC_GET_CEC_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_CECCLKSOURCE_HSI_DIV488)) + { + frequency = (HSI_VALUE / 488U); + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_CECCLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for CEC */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_CECSEL */ + +#if defined(RCC_CCIPR_LPUART1SEL) + case RCC_PERIPHCLK_LPUART1: + /* Get the current LPUART1 source */ + srcclk = __HAL_RCC_GET_LPUART1_SOURCE(); + + if (srcclk == RCC_LPUART1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_LPUART1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPUART1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPUART1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPUART1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPUART1SEL */ + +#if defined(RCC_CCIPR_LPUART2SEL) + case RCC_PERIPHCLK_LPUART2: + /* Get the current LPUART2 source */ + srcclk = __HAL_RCC_GET_LPUART2_SOURCE(); + + if (srcclk == RCC_LPUART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_LPUART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPUART2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPUART2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPUART2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPUART2SEL */ + + case RCC_PERIPHCLK_ADC: + + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + if (srcclk == RCC_ADCCLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if (srcclk == RCC_ADCCLKSOURCE_HSI) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_ADCCLKSOURCE_PLLADC) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + /* Clock not enabled for ADC */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + + case RCC_PERIPHCLK_I2C1: + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + if (srcclk == RCC_I2C1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2C1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + /* Clock not enabled for I2C1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + +#if defined(RCC_CCIPR_I2C2SEL) + case RCC_PERIPHCLK_I2C2: + /* Get the current I2C2 source */ + srcclk = __HAL_RCC_GET_I2C2_SOURCE(); + + if (srcclk == RCC_I2C2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_I2C2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2C2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + /* Clock not enabled for I2C2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_I2C2SEL */ + + case RCC_PERIPHCLK_I2S1: + /* Get the current I2S1 source */ + srcclk = __HAL_RCC_GET_I2S1_SOURCE(); + + if (srcclk == RCC_I2S1CLKSOURCE_PLL) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + else if (srcclk == RCC_I2S1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2S1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_I2S1CLKSOURCE_EXT) + { + /* External clock used.*/ + frequency = EXTERNAL_I2S1_CLOCK_VALUE; + } + /* Clock not enabled for I2S1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + +#if defined(RCC_CCIPR2_I2S2SEL) + case RCC_PERIPHCLK_I2S2: + /* Get the current I2S2 source */ + srcclk = __HAL_RCC_GET_I2S2_SOURCE(); + + if (srcclk == RCC_I2S2CLKSOURCE_PLL) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + else if (srcclk == RCC_I2S2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2S2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_I2S2CLKSOURCE_EXT) + { + /* External clock used.*/ + frequency = EXTERNAL_I2S2_CLOCK_VALUE; + } + /* Clock not enabled for I2S2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) + case RCC_PERIPHCLK_LPTIM1: + /* Get the current LPTIM1 source */ + srcclk = __HAL_RCC_GET_LPTIM1_SOURCE(); + + if (srcclk == RCC_LPTIM1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPTIM1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) + case RCC_PERIPHCLK_LPTIM2: + /* Get the current LPTIM2 source */ + srcclk = __HAL_RCC_GET_LPTIM2_SOURCE(); + + if (srcclk == RCC_LPTIM2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPTIM2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(RCC_CCIPR_TIM1SEL) + case RCC_PERIPHCLK_TIM1: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM1SEL); + + if (srcclk == RCC_TIM1CLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_TIM1CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) + case RCC_PERIPHCLK_TIM15: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM15SEL); + + if (srcclk == RCC_TIM15CLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_TIM15CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(RCC_CCIPR2_USBSEL) + case RCC_PERIPHCLK_USB: + + srcclk = READ_BIT(RCC->CCIPR2, RCC_CCIPR2_USBSEL); + + if (srcclk == RCC_USBCLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } +#if defined(RCC_HSI48_SUPPORT) + else if (srcclk == RCC_USBCLKSOURCE_HSI48) /* HSI48 ? */ + { + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSI48RDY)) && (srcclk == RCC_USBCLKSOURCE_HSI48)) + { + frequency = HSI48_VALUE; + } + } +#endif /* RCC_HSI48_SUPPORT */ + else if (srcclk == RCC_USBCLKSOURCE_HSE) + { + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_USBCLKSOURCE_HSE)) + { + frequency = HSE_VALUE; + } + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_USBSEL */ + +#if defined(RCC_CCIPR2_FDCANSEL) + case RCC_PERIPHCLK_FDCAN: + + srcclk = READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL); + + if (srcclk == RCC_FDCANCLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_FDCANCLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_FDCANCLKSOURCE_HSE)) + { + frequency = HSE_VALUE; + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_FDCANSEL */ + + default: + break; + } + } + + return (frequency); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation of LSE CSS, Low speed clock output and + clock after wake-up from STOP mode. +@endverbatim + * @{ + */ + +/** + * @brief Select the Low Speed clock source to output on LSCO pin (PA2). + * @param LSCOSource specifies the Low Speed clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + */ +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); + + /* LSCO Pin Clock Enable */ + LSCO_CLK_ENABLE(); + + /* Configure the LSCO pin in analog mode */ + GPIO_InitStruct.Pin = LSCO_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); + + /* Update LSCOSEL clock source in Backup Domain control register */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, LSCOSource | RCC_BDCR_LSCOEN); + + if (backupchanged == SET) + { + HAL_PWR_DisableBkUpAccess(); + } + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @brief Disable the Low Speed clock output. + * @retval None + */ +void HAL_RCCEx_DisableLSCO(void) +{ + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Update LSCOEN bit in Backup Domain control register */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable access to the backup domain */ + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); + + /* Restore previous configuration */ + if (backupchanged == SET) + { + /* Disable access to the backup domain */ + HAL_PWR_DisableBkUpAccess(); + } + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and sychronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; /* no init needed */ + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[6:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Wait for CRS Synchronization status. + * @param Timeout Duration of the timeout + * @note Timeout is based on the maximum time to receive a SYNC event based on synchronization + * frequency. + * @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. + * @retval Combination of Synchronization status + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_TIMEOUT + * @arg @ref RCC_CRS_SYNCOK + * @arg @ref RCC_CRS_SYNCWARN + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + */ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } + while (RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if (((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if (((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if (((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if (((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if ((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if ((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if ((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c new file mode 100644 index 0000000..7e67120 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c @@ -0,0 +1,7719 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_TIM_RegisterCallback() to register a callback. + @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup TIM_Private_Constants + * @{ + */ +#define TIMx_OR1_OCREF_CLR 0x00000001U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_ALL: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + default: + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + default: + break; + } + + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } +#if defined(COMP1) || defined(COMP2) || defined(COMP3) +#if defined(COMP1) && defined(COMP2) + case TIM_CLEARINPUTSOURCE_COMP1: + case TIM_CLEARINPUTSOURCE_COMP2: +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) + case TIM_CLEARINPUTSOURCE_COMP3: +#endif /* COMP3 */ + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* OCREF_CLR_INT is connected to COMPx output */ + MODIFY_REG(htim->Instance->OR1, TIMx_OR1_OCREF_CLR, sClearInputConfig->ClearInputSource); + break; + } +#endif /* COMP1 || COMP2 || COMP3 */ + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } + + default: + break; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */ + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */ + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */ + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */ + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */ + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */ + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */ + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */ + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */ + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */ + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2 Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + break; + } + return HAL_OK; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2Callback */ +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c new file mode 100644 index 0000000..7b07d4c --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c @@ -0,0 +1,2800 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Select timer input source. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); + + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); + + /* Set BREAK AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); + } + + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); + + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_AFMODE(sBreakDeadTimeConfig->Break2AFMode)); + + /* Set BREAK2 AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, sBreakDeadTimeConfig->Break2AFMode); + } + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) + +{ + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM1_AF1_BKINE; + bkin_enable_bitpos = TIM1_AF1_BKINE_Pos; + bkin_polarity_mask = TIM1_AF1_BKINP; + bkin_polarity_bitpos = TIM1_AF1_BKINP_Pos; + break; + } +#if defined(COMP1) && defined(COMP2) + case TIM_BREAKINPUTSOURCE_COMP1: + { + bkin_enable_mask = TIM1_AF1_BKCMP1E; + bkin_enable_bitpos = TIM1_AF1_BKCMP1E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP1P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP1P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP2: + { + bkin_enable_mask = TIM1_AF1_BKCMP2E; + bkin_enable_bitpos = TIM1_AF1_BKCMP2E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP2P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP2P_Pos; + break; + } +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) + case TIM_BREAKINPUTSOURCE_COMP3: + { + bkin_enable_mask = TIM1_AF1_BKCMP3E; + bkin_enable_bitpos = TIM1_AF1_BKCMP3E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP3P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP3P_Pos; + break; + } +#endif /* COMP3 */ + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_AF2 register value */ + tmporx = htim->Instance->AF2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF2 */ + htim->Instance->AF2 = tmporx; + break; + } + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM1, the parameter can take one of the following values: + * @arg TIM_TIM1_ETR_GPIO: TIM1 ETR is is connected to GPIO + * @arg TIM_TIM1_ETR_COMP1: TIM1 ETR is connected to COMP1 output + * @arg TIM_TIM1_ETR_COMP2: TIM1 ETR is connected to COMP2 output + * @arg TIM_TIM1_ETR_COMP3: TIM1 ETR is connected to COMP3 output (**) + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1 ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1 ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1 ETR is connected to ADC1 AWD3 + * + * For TIM2, the parameter can take one of the following values: (*) + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * @arg TIM_TIM2_ETR_COMP3: TIM2_ETR is connected to COMP3 output (**) + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_MCO: TIM2_ETR is connected to MCO (**) + * @arg TIM_TIM2_ETR_MCO2: TIM2_ETR is connected to MCO2 (**) + * + * For TIM3, the parameter can take one of the following values: + * @arg TIM_TIM3_ETR_GPIO TIM3_ETR is connected to GPIO + * @arg TIM_TIM3_ETR_COMP1 TIM3_ETR is connected to COMP1 output + * @arg TIM_TIM3_ETR_COMP2 TIM3_ETR is connected to COMP2 output + * @arg TIM_TIM3_ETR_COMP3 TIM3_ETR is connected to COMP3 output (**) + * + * For TIM4, the parameter can take one of the following values:(*) + * @arg TIM_TIM4_ETR_GPIO TIM4_ETR is connected to GPIO + * @arg TIM_TIM4_ETR_COMP1 TIM4_ETR is connected to COMP1 output + * @arg TIM_TIM4_ETR_COMP2 TIM4_ETR is connected to COMP2 output + * @arg TIM_TIM4_ETR_COMP3 TIM4_ETR is connected to COMP3 output (**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(Remap)); + + __HAL_LOCK(htim); + + MODIFY_REG(htim->Instance->AF1, TIM1_AF1_ETRSEL_Msk, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Select the timer input source + * @param htim TIM handle. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TI1 input channel + * @arg TIM_CHANNEL_2: TI2 input channel + * @arg TIM_CHANNEL_3: TI3 input channel + * @param TISelection specifies the timer input source + * + * For TIM1 this parameter can be one of the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * @arg TIM_TIM1_TI2_GPIO: TIM1 TI2 is connected to GPIO + * @arg TIM_TIM1_TI2_COMP2: TIM1 TI2 is connected to COMP2 output + * @arg TIM_TIM1_TI3_GPIO: TIM1 TI3 is connected to GPIO + * @arg TIM_TIM1_TI3_COMP3: TIM1 TI3 is connected to COMP3 output (**) + * + * For TIM2, the parameter is one of the following values: (*) + * @arg TIM_TIM2_TI1_GPIO: TIM2 TI1 is connected to GPIO + * @arg TIM_TIM2_TI1_COMP1: TIM2 TI1 is connected to COMP1 output + * @arg TIM_TIM2_TI2_GPIO: TIM2 TI2 is connected to GPIO + * @arg TIM_TIM2_TI2_COMP2: TIM2 TI2 is connected to COMP2 output + * @arg TIM_TIM2_TI3_GPIO: TIM2 TI3 is connected to GPIO + * @arg TIM_TIM2_TI3_COMP3: TIM2 TI3 is connected to COMP3 output (**) + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO + * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output + * @arg TIM_TIM3_TI2_GPIO: TIM3 TI2 is connected to GPIO + * @arg TIM_TIM3_TI2_COMP2: TIM3 TI2 is connected to COMP2 output + * @arg TIM_TIM3_TI3_GPIO: TIM3 TI3 is connected to GPIO + * @arg TIM_TIM3_TI3_COMP3: TIM3 TI3 is connected to COMP3 output (**) + * + * For TIM4, the parameter is one of the following values: (*) + * @arg TIM_TIM4_TI1_GPIO: TIM4 TI1 is connected to GPIO + * @arg TIM_TIM4_TI1_COMP1: TIM4 TI1 is connected to COMP1 output + * @arg TIM_TIM4_TI2_GPIO: TIM4 TI2 is connected to GPIO + * @arg TIM_TIM4_TI2_COMP2: TIM4 TI2 is connected to COMP2 output + * @arg TIM_TIM4_TI3_GPIO: TIM4 TI3 is connected to GPIO + * @arg TIM_TIM4_TI3_COMP3: TIM4 TI3 is connected to COMP3 output + * + * For TIM14, the parameter is one of the following values: + * @arg TIM_TIM14_TI1_GPIO: TIM14 TI1 is connected to GPIO + * @arg TIM_TIM14_TI1_RTC: TIM14 TI1 is connected to RTC clock + * @arg TIM_TIM14_TI1_HSE_32: TIM14 TI1 is connected to HSE div 32 + * @arg TIM_TIM14_TI1_MCO: TIM14 TI1 is connected to MCO + * @arg TIM_TIM14_TI1_MCO2: TIM14 TI1 is connected to MCO2 (**) + * + * For TIM15, the parameter is one of the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_TIM2_CH1: TIM15 TI1 is connected to TIM2 CH1 + * @arg TIM_TIM15_TI1_TIM3_CH1: TIM15 TI1 is connected to TIM3 CH1 + * @arg TIM_TIM15_TI2_GPIO: TIM15 TI2 is connected to GPIO + * @arg TIM_TIM15_TI2_TIM2_CH2: TIM15 TI2 is connected to TIM2 CH2 + * @arg TIM_TIM15_TI2_TIM3_CH2: TIM15 TI2 is connected to TIM3 CH2 + * + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_RTC_WAKEUP: TIM16 TI1 is connected to TRC wakeup interrupt + * @arg TIM_TIM16_TI1_MCO2: TIM16 TI1 is connected to MCO2 (**) + * + * For TIM17, the parameter can have the following values: + * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO + * @arg TIM_TIM14_TI1_HSI: TIM17 TI1 is connected to HSI (**) + * @arg TIM_TIM17_TI1_HSE_32: TIM17 TI1 is connected to HSE div 32 + * @arg TIM_TIM17_TI1_MCO: TIM17 TI1 is connected to MCO + * @arg TIM_TIM17_TI1_MCO2: TIM17 TI1 is connected to MCO2 (**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_TIM_TISEL_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TISEL(TISelection)); + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI1SEL, TISelection); + break; + case TIM_CHANNEL_2: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI2SEL, TISelection); + break; + case TIM_CHANNEL_3: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI3SEL, TISelection); + break; + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM); + } + break; + } + default: + break; + } + + return HAL_OK; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + do + { + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != TIM_BDTR_BKDSRM) + { + return HAL_OK; + } + } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT); + + return HAL_TIMEOUT; + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) + { + /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + do + { + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != TIM_BDTR_BK2DSRM) + { + return HAL_OK; + } + } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT); + + return HAL_TIMEOUT; + } + break; + } + default: + break; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c new file mode 100644 index 0000000..a152e73 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c @@ -0,0 +1,4624 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_UART_RegisterCallback() to register a user callback. + Function @ref HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_UART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively @ref HAL_UART_RegisterRxEventCallback() , @ref HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_UART_Init() + and @ref HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_UART_Init() and @ref HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_UART_RegisterCallback() before calling @ref HAL_UART_DeInit() + or @ref HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8| \ + USART_CR1_FIFOEN )) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT| \ + USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used instead of the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + __HAL_LOCK(huart); + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + __HAL_UNLOCK(huart); + + /* Enable the TX FIFO threshold interrupt */ + SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the Transmit Data Register Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return(UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + __HAL_UNLOCK(huart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return(UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + __HAL_LOCK(huart); + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + &&((isrflags & USART_ISR_IDLE) != 0U) + &&((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ( (nb_remaining_rx_data > 0U) + &&(nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ( (huart->RxXferCount > 0U) + &&(nb_rx_data > 0U) ) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif + } + return; + } + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t lpuart_ker_ck_pres; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + tmpreg |= (uint32_t)huart->FifoMode; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* If proper clock source reported */ + if (pclk != 0U) + { + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint16_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint16_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Handle UART Communication Timeout. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + + if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, TXFT interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize/2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c new file mode 100644 index 0000000..f9991ef --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c @@ -0,0 +1,1059 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_IT(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data copy from RDR will be + handled by DMA from a uint16_t frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c new file mode 100644 index 0000000..a5031d6 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c @@ -0,0 +1,787 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_adc.c + * @author MCD Application Team + * @brief ADC LL module driver + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_adc.h" +#include "stm32g0xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @addtogroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup ADC_LL_Private_Constants + * @{ + */ + +/* Definitions of ADC hardware constraints delays */ +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values: */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Refer to @ref ADC_LL_EC_HW_DELAYS for description of ADC timeout */ +/* values definition. */ +/* Note: ADC timeout values are defined here in CPU cycles to be independent */ +/* of device clock setting. */ +/* In user application, ADC timeout values should be defined with */ +/* temporal values, in function of device clock settings. */ +/* Highest ratio CPU clock frequency vs ADC clock frequency: */ +/* - ADC clock from synchronous clock with AHB prescaler 512, */ +/* APB prescaler 16, ADC prescaler 4. */ +/* - ADC clock from asynchronous clock (HSI) with prescaler 1, */ +/* with highest ratio CPU clock frequency vs HSI clock frequency: */ +/* CPU clock frequency max 56MHz, HSI frequency 16MHz: ratio 4. */ +/* Unit: CPU cycles. */ +#define ADC_CLOCK_RATIO_VS_CPU_HIGHEST (512UL * 16UL * 4UL) +#define ADC_TIMEOUT_DISABLE_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +#define ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +/* Note: CCRDY handshake requires 1APB + 2 ADC + 3 APB cycles */ +/* after the channel configuration has been changed. */ +/* Driver timeout is approximated to 6 CPU cycles. */ +#define ADC_TIMEOUT_CCRDY_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 6UL) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup ADC_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* common to several ADC instances. */ +#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV6) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV8) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV10) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV12) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV16) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV32) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV64) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV128) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV256) \ + ) + +#define IS_LL_ADC_CLOCK_FREQ_MODE(__CLOCK_FREQ_MODE__) \ + (((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_HIGH) \ + || ((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_LOW) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC instance. */ +#define IS_LL_ADC_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC) \ + ) + +#define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ + (((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ + ) + +#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ + (((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ + || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ + ) + +#define IS_LL_ADC_LOW_POWER(__LOW_POWER__) \ + (((__LOW_POWER__) == LL_ADC_LP_MODE_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group regular */ +#if defined(TIM15) && defined(TIM6) && defined(TIM2) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM15_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#elif defined(TIM15) && defined(TIM6) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM15_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#elif defined(TIM2) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#else +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#endif + +#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ + (((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ + || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ + ) + +#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ + (((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ + ) + +#define IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(__REG_OVR_DATA_BEHAVIOR__) \ + (((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_PRESERVED) \ + || ((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_OVERWRITTEN) \ + ) + +#define IS_LL_ADC_REG_SEQ_MODE(__REG_SEQ_MODE__) \ + (((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_FIXED) \ + || ((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_CONFIGURABLE) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ + (((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ + (((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of all ADC instances belonging to + * the same ADC common instance to their default reset values. + * @note This function is performing a hard reset, using high level + * clock source RCC ADC reset. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) +{ + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + + /* Force reset of ADC clock (core clock) */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); + + /* Release reset of ADC clock (core clock) */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); + + return SUCCESS; +} + +/** + * @brief Initialize some features of ADC common parameters + * (all ADC instances belonging to the same ADC common instance) + * and multimode (for devices with several ADC instances available). + * @note The setting of ADC common parameters is conditioned to + * ADC instances state: + * All ADC instances belonging to the same ADC common instance + * must be disabled. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are initialized + * - ERROR: ADC common registers are not initialized + */ +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock)); + + /* Note: Hardware constraint (refer to description of functions */ + /* "LL_ADC_SetCommonXXX()": */ + /* On this STM32 series, setting of these features is conditioned to */ + /* ADC state: */ + /* All ADC instances of the ADC common group must be disabled. */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - common to several ADC */ + /* (all ADC instances belonging to the same ADC common instance) */ + /* - Set ADC clock (conversion clock) */ + LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock); + } + else + { + /* Initialization error: One or several ADC instances belonging to */ + /* the same ADC common instance are not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + /* Set ADC_CommonInitStruct fields to default values */ + /* Set fields of ADC common */ + /* (all ADC instances belonging to the same ADC common instance) */ + ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2; + +} + +/** + * @brief De-initialize registers of the selected ADC instance + * to their default reset values. + * @note To reset all ADC instances quickly (perform a hard reset), + * use function @ref LL_ADC_CommonDeInit(). + * @note If this functions returns error status, it means that ADC instance + * is in an unknown state. + * In this case, perform a hard reset using high level + * clock source RCC ADC reset. + * Refer to function @ref LL_ADC_CommonDeInit(). + * @param ADCx ADC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are de-initialized + * - ERROR: ADC registers are not de-initialized + */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) +{ + ErrorStatus status = SUCCESS; + + __IO uint32_t timeout_cpu_cycles = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + /* Disable ADC instance if not already disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 1UL) + { + /* Set ADC group regular trigger source to SW start to ensure to not */ + /* have an external trigger event occurring during the conversion stop */ + /* ADC disable process. */ + LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE); + + /* Stop potential ADC conversion on going on ADC group regular. */ + if (LL_ADC_REG_IsConversionOngoing(ADCx) != 0UL) + { + if (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 0UL) + { + LL_ADC_REG_StopConversion(ADCx); + } + } + + /* Wait for ADC conversions are effectively stopped */ + timeout_cpu_cycles = ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES; + while (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Disable the ADC instance */ + LL_ADC_Disable(ADCx); + + /* Wait for ADC instance is effectively disabled */ + timeout_cpu_cycles = ADC_TIMEOUT_DISABLE_CPU_CYCLES; + while (LL_ADC_IsDisableOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + } + + /* Check whether ADC state is compliant with expected state */ + if (READ_BIT(ADCx->CR, + (ADC_CR_ADSTP | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN) + ) + == 0UL) + { + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + CLEAR_BIT(ADCx->IER, + (LL_ADC_IT_ADRDY + | LL_ADC_IT_EOC + | LL_ADC_IT_EOS + | LL_ADC_IT_OVR + | LL_ADC_IT_EOSMP + | LL_ADC_IT_AWD1 + | LL_ADC_IT_AWD2 + | LL_ADC_IT_AWD3 + | LL_ADC_IT_EOCAL + | LL_ADC_IT_CCRDY + ) + ); + + /* Reset register ISR */ + SET_BIT(ADCx->ISR, + (LL_ADC_FLAG_ADRDY + | LL_ADC_FLAG_EOC + | LL_ADC_FLAG_EOS + | LL_ADC_FLAG_OVR + | LL_ADC_FLAG_EOSMP + | LL_ADC_FLAG_AWD1 + | LL_ADC_FLAG_AWD2 + | LL_ADC_FLAG_AWD3 + | LL_ADC_FLAG_EOCAL + | LL_ADC_FLAG_CCRDY + ) + ); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + CLEAR_BIT(ADCx->CR, ADC_CR_ADVREGEN); + + /* Reset register CFGR1 */ + CLEAR_BIT(ADCx->CFGR1, + (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN + | ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD + | ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES + | ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) + ); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + CLEAR_BIT(ADCx->CFGR2, + (ADC_CFGR2_CKMODE + | ADC_CFGR2_TOVS | ADC_CFGR2_OVSS | ADC_CFGR2_OVSR + | ADC_CFGR2_OVSE) + ); + + /* Reset register SMPR */ + CLEAR_BIT(ADCx->SMPR, ADC_SMPR_SMP1 | ADC_SMPR_SMP2 | ADC_SMPR_SMPSEL); + + /* Reset register TR1 */ + MODIFY_REG(ADCx->TR1, ADC_TR1_HT1 | ADC_TR1_LT1, ADC_TR1_HT1); + + /* Reset register TR2 */ + MODIFY_REG(ADCx->TR2, ADC_TR2_HT2 | ADC_TR2_LT2, ADC_TR2_HT2); + + /* Reset register TR3 */ + MODIFY_REG(ADCx->TR3, ADC_TR3_HT3 | ADC_TR3_LT3, ADC_TR3_HT3); + + /* Reset register CHSELR */ + CLEAR_BIT(ADCx->CHSELR, + (ADC_CHSELR_CHSEL18 | ADC_CHSELR_CHSEL17 | ADC_CHSELR_CHSEL16 + | ADC_CHSELR_CHSEL15 | ADC_CHSELR_CHSEL14 | ADC_CHSELR_CHSEL13 | ADC_CHSELR_CHSEL12 + | ADC_CHSELR_CHSEL11 | ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL9 | ADC_CHSELR_CHSEL8 + | ADC_CHSELR_CHSEL7 | ADC_CHSELR_CHSEL6 | ADC_CHSELR_CHSEL5 | ADC_CHSELR_CHSEL4 + | ADC_CHSELR_CHSEL3 | ADC_CHSELR_CHSEL2 | ADC_CHSELR_CHSEL1 | ADC_CHSELR_CHSEL0) + ); + + /* Wait for ADC channel configuration ready */ + timeout_cpu_cycles = ADC_TIMEOUT_CCRDY_CPU_CYCLES; + while (LL_ADC_IsActiveFlag_CCRDY(ADCx) == 0UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Clear flag ADC channel configuration ready */ + LL_ADC_ClearFlag_CCRDY(ADCx); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CALFACT */ + CLEAR_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT); + + } + else + { + /* ADC instance is in an unknown state */ + /* Need to performing a hard reset of ADC instance, using high level */ + /* clock source RCC ADC reset. */ + /* Caution: On this STM32 series, if several ADC instances are available */ + /* on the selected device, RCC ADC reset will reset */ + /* all ADC instances belonging to the common ADC instance. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, some other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + assert_param(IS_LL_ADC_CLOCK(ADC_InitStruct->Clock)); + assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); + assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); + assert_param(IS_LL_ADC_LOW_POWER(ADC_InitStruct->LowPowerMode)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC instance */ + /* - Set ADC data resolution */ + /* - Set ADC conversion data alignment */ + /* - Set ADC low power mode */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_RES + | ADC_CFGR1_ALIGN + | ADC_CFGR1_WAIT + | ADC_CFGR1_AUTOFF + , + ADC_InitStruct->Resolution + | ADC_InitStruct->DataAlignment + | ADC_InitStruct->LowPowerMode + ); + + MODIFY_REG(ADCx->CFGR2, + ADC_CFGR2_CKMODE + , + ADC_InitStruct->Clock + ); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_InitTypeDef field to default value. + * @param ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) +{ + /* Set ADC_InitStruct fields to default values */ + /* Set fields of ADC instance */ + ADC_InitStruct->Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; + ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; + ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; + ADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE; + +} + +/** + * @brief Initialize some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note Before using this function, ADC group regular sequencer + * must be configured: refer to function + * @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); + assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode)); + assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer)); + assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(ADC_REG_InitStruct->Overrun)); + + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); + } + + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); + + /* ADC group regular continuous mode and discontinuous mode */ + /* can not be enabled simultenaeously */ + assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) + || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); + } + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group regular */ + /* - Set ADC group regular trigger source */ + /* - Set ADC group regular sequencer length */ + /* - Set ADC group regular sequencer discontinuous mode */ + /* - Set ADC group regular continuous mode */ + /* - Set ADC group regular conversion data transfer: no transfer or */ + /* transfer by DMA, and DMA requests mode */ + /* - Set ADC group regular overrun behavior */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + /* Case of sequencer mode fixed + or sequencer length >= 2 ranks with sequencer mode fully configurable: + discontinuous mode configured */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | ADC_REG_InitStruct->SequencerDiscont + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } + else + { + /* Case of sequencer mode fully configurable + and sequencer length 1 rank (sequencer disabled): + discontinuous mode discarded (fixed to disable) */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | LL_ADC_REG_SEQ_DISCONT_DISABLE + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } + + /* Set ADC group regular sequencer length */ + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); + } + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + /* Set ADC_REG_InitStruct fields to default values */ + /* Set fields of ADC group regular */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; + ADC_REG_InitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; + ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; + ADC_REG_InitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; + ADC_REG_InitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; + ADC_REG_InitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c new file mode 100644 index 0000000..b8e711b --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c @@ -0,0 +1,369 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dma.c + * @author MCD Application Team + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_dma.h" +#include "stm32g0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ + ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) + +#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ + ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) + +#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ + ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) + +#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) + +#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) + +#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + +#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) ((__VALUE__) <= LL_DMAMUX_MAX_REQ) + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ + ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ + ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ + ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) + +#if defined(DMA2) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ + (((INSTANCE) == DMA2) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7)))) +#else +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#endif +#endif /* DMA2 */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_ALL + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are de-initialized + * - ERROR: DMA registers are not de-initialized + */ +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel) || (Channel == LL_DMA_CHANNEL_ALL)); + + if (Channel == LL_DMA_CHANNEL_ALL) + { + if (DMAx == DMA1) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1); + } +#if defined(DMA2) + else if (DMAx == DMA2) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2); + } +#endif + else + { + status = ERROR; + } + } + else + { + DMA_Channel_TypeDef *tmp; + + tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Disable the selected DMAx_Channely */ + CLEAR_BIT(tmp->CCR, DMA_CCR_EN); + + /* Reset DMAx_Channely control register */ + WRITE_REG(tmp->CCR, 0U); + + /* Reset DMAx_Channely remaining bytes register */ + WRITE_REG(tmp->CNDTR, 0U); + + /* Reset DMAx_Channely peripheral address register */ + WRITE_REG(tmp->CPAR, 0U); + + /* Reset DMAx_Channely memory address register */ + WRITE_REG(tmp->CMAR, 0U); + + /* Reset Request register field for DMAx Channel */ + LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMAMUX_REQ_MEM2MEM); + + if (Channel == LL_DMA_CHANNEL_1) + { + /* Reset interrupt pending bits for DMAx Channel1 */ + LL_DMA_ClearFlag_GI1(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_2) + { + /* Reset interrupt pending bits for DMAx Channel2 */ + LL_DMA_ClearFlag_GI2(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_3) + { + /* Reset interrupt pending bits for DMAx Channel3 */ + LL_DMA_ClearFlag_GI3(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_4) + { + /* Reset interrupt pending bits for DMAx Channel4 */ + LL_DMA_ClearFlag_GI4(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_5) + { + /* Reset interrupt pending bits for DMAx Channel5 */ + LL_DMA_ClearFlag_GI5(DMAx); + } +#if defined(DMA1_Channel6) + else if (Channel == LL_DMA_CHANNEL_6) + { + /* Reset interrupt pending bits for DMAx Channel6 */ + LL_DMA_ClearFlag_GI6(DMAx); + } +#endif +#if defined(DMA1_Channel7) + else if (Channel == LL_DMA_CHANNEL_7) + { + /* Reset interrupt pending bits for DMAx Channel7 */ + LL_DMA_ClearFlag_GI7(DMAx); + } +#endif + else + { + status = ERROR; + } + } + + return status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : + * @arg @ref __LL_DMA_GET_INSTANCE + * @arg @ref __LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); + assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); + assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); + assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); + assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); + assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + + /*---------------------------- DMAx CCR Configuration ------------------------ + * Configure DMAx_Channely: data transfer direction, data transfer mode, + * peripheral and memory increment mode, + * data size alignment and priority level with parameters : + * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits + * - Mode: DMA_CCR_CIRC bit + * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit + * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit + * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits + * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits + * - Priority: DMA_CCR_PL[1:0] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->PeriphOrM2MSrcIncMode | \ + DMA_InitStruct->MemoryOrM2MDstIncMode | \ + DMA_InitStruct->PeriphOrM2MSrcDataSize | \ + DMA_InitStruct->MemoryOrM2MDstDataSize | \ + DMA_InitStruct->Priority); + + /*-------------------------- DMAx CMAR Configuration ------------------------- + * Configure the memory or destination base address with parameter : + * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits + */ + LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); + + /*-------------------------- DMAx CPAR Configuration ------------------------- + * Configure the peripheral or source base address with parameter : + * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits + */ + LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); + + /*--------------------------- DMAx CNDTR Configuration ----------------------- + * Configure the peripheral base address with parameter : + * - NbData: DMA_CNDTR_NDT[15:0] bits + */ + LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); + + /*--------------------------- DMAMUXx CCR Configuration ---------------------- + * Configure the DMA request for DMA Channels on DMAMUX Channel x with parameter : + * - PeriphRequest: DMA_CxCR[7:0] bits + */ + LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; + DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; + DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct->NbData = 0x00000000U; + DMA_InitStruct->PeriphRequest = LL_DMAMUX_REQ_MEM2MEM; + DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c new file mode 100644 index 0000000..b0d231f --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c @@ -0,0 +1,1349 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rcc.c + * @author MCD Application Team + * @brief RCC LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @addtogroup RCC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_LL_Private_Macros + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE)) +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE)) +#else +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_USART1_CLKSOURCE) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(LPUART1) && defined(LPUART2) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPUART2_CLKSOURCE)) +#elif defined(LPUART1) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) +#endif /* LPUART1 && LPUART2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE)) +#else +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(LPTIM1) || defined(LPTIM2) +#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPTIM2_CLKSOURCE)) +#endif /* LPTIM1 || LPTIM2 */ + +#if defined(RNG) +#define IS_LL_RCC_RNG_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_RNG_CLKSOURCE)) +#endif /* RNG */ + +#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE)) + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2S2_CLKSOURCE)) +#else +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(CEC) +#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE)) +#endif /* CEC */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_LL_RCC_FDCAN_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_FDCAN_CLKSOURCE)) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RCC_CCIPR_TIM1SEL) && defined(RCC_CCIPR_TIM15SEL) +#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE)) +#elif defined(RCC_CCIPR_TIM1SEL) +#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE)) +#endif /* RCC_CCIPR_TIM1SEL */ + + + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +uint32_t RCC_GetSystemClockFreq(void); +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +uint32_t RCC_PLL_GetFreqDomain_SYS(void); +uint32_t RCC_PLL_GetFreqDomain_ADC(void); +uint32_t RCC_PLL_GetFreqDomain_I2S1(void); +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +uint32_t RCC_PLL_GetFreqDomain_I2S2(void); +uint32_t RCC_PLL_GetFreqDomain_USB(void); +uint32_t RCC_PLL_GetFreqDomain_FDCAN(void); +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +uint32_t RCC_PLL_GetFreqDomain_RNG(void); +uint32_t RCC_PLL_GetFreqDomain_TIM1(void); +uint32_t RCC_PLL_GetFreqDomain_TIM15(void); +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE and PLL OFF + * - AHB and APB1 prescaler set to 1. + * - CSS, MCO OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RCC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RCC_DeInit(void) +{ + /* Set HSION bit and wait for HSI READY bit */ + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + {} + + /* Set HSITRIM bits to reset value*/ + LL_RCC_HSI_SetCalibTrimming(0x40U); + + /* Reset CFGR register */ + LL_RCC_WriteReg(CFGR, 0x00000000U); + + /* Reset whole CR register but HSI in 2 steps in case HSEBYP is set */ + LL_RCC_WriteReg(CR, RCC_CR_HSION); + while (LL_RCC_HSE_IsReady() != 0U) + {} + LL_RCC_WriteReg(CR, RCC_CR_HSION); + + /* Wait for PLL READY bit to be reset */ + while (LL_RCC_PLL_IsReady() != 0U) + {} + + /* Reset PLLCFGR register */ + LL_RCC_WriteReg(PLLCFGR, 16U << RCC_PLLCFGR_PLLN_Pos); + + /* Disable all interrupts */ + LL_RCC_WriteReg(CIER, 0x00000000U); + + /* Clear all interrupts flags */ + LL_RCC_WriteReg(CICR, 0xFFFFFFFFU); + + return SUCCESS; +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * and different peripheral clocks available on the device. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE divided by HSI division factor(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(***) + * or HSI_VALUE(**) multiplied/divided by the PLL factors. + * @note (**) HSI_VALUE is a constant defined in this file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in this file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note The result of this function could be incorrect when using fractional + * value for HSE crystal. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * @{ + */ + +/** + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * @note Each time SYSCLK, HCLK and/or PCLK1 clock changes, this function + * must be called to update structure fields. Otherwise, any + * configuration based on this function will be incorrect. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); + + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); + + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); +} + +/** + * @brief Return USARTx clock frequency + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE + * @arg @ref LL_RCC_USART3_CLKSOURCE + * @retval USART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource) +{ + uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource)); + + if (USARTxSource == LL_RCC_USART1_CLKSOURCE) + { + /* USART1CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_PCLK1: /* USART1 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(RCC_CCIPR_USART2SEL) + else if (USARTxSource == LL_RCC_USART2_CLKSOURCE) + { + /* USART2CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + else if (USARTxSource == LL_RCC_USART3_CLKSOURCE) + { + /* USART3CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_USART3SEL */ + else + { + /* nothing to do */ + } + return usart_frequency; +} + +/** + * @brief Return I2Cx clock frequency + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @retval I2C clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready + */ +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) +{ + uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource)); + + if (I2CxSource == LL_RCC_I2C1_CLKSOURCE) + { + /* I2C1 CLK clock frequency */ + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */ + i2c_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + i2c_frequency = HSI_VALUE; + } + break; + + case LL_RCC_I2C1_CLKSOURCE_PCLK1: /* I2C1 Clock is PCLK1 */ + default: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(RCC_CCIPR_I2C2SEL) + else if (I2CxSource == LL_RCC_I2C2_CLKSOURCE) + { + /* I2C2 CLK clock frequency */ + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C2_CLKSOURCE_SYSCLK: /* I2C2 Clock is System Clock */ + i2c_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2C2_CLKSOURCE_HSI: /* I2C2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + i2c_frequency = HSI_VALUE; + } + break; + + case LL_RCC_I2C2_CLKSOURCE_PCLK1: /* I2C2 Clock is PCLK1 */ + default: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_I2C2SEL */ + else + { + } + + return i2c_frequency; +} + +/** + * @brief Return I2Sx clock frequency + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval I2S clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) +{ + uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); + + if (I2SxSource == LL_RCC_I2S1_CLKSOURCE) + { + /* I2S1 CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S1_CLKSOURCE_HSI: /* I2S1 Clock is HSI */ + i2s_frequency = HSI_VALUE; + break; + + case LL_RCC_I2S1_CLKSOURCE_PLL: /* I2S1 Clock is PLL"P" */ + if (LL_RCC_PLL_IsReady() == 1U) + { + i2s_frequency = RCC_PLL_GetFreqDomain_I2S1(); + } + break; + + + case LL_RCC_I2S1_CLKSOURCE_PIN: /* I2S1 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S1_CLKSOURCE_SYSCLK: /* I2S1 Clock is System Clock */ + default: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + } + } +#if defined(RCC_CCIPR2_I2S2SEL) + else if (I2SxSource == LL_RCC_I2S2_CLKSOURCE) + { + /* I2S2 CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S2_CLKSOURCE_HSI: /* I2S2 Clock is HSI */ + i2s_frequency = HSI_VALUE; + break; + + case LL_RCC_I2S2_CLKSOURCE_PLL: /* I2S2 Clock is PLL"P" */ + if (LL_RCC_PLL_IsReady() == 1U) + { + i2s_frequency = RCC_PLL_GetFreqDomain_I2S2(); + } + break; + + case LL_RCC_I2S2_CLKSOURCE_PIN: /* I2S2 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S2_CLKSOURCE_SYSCLK: /* I2S2 Clock is System Clock */ + default: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + } + } +#endif /* RCC_CCIPR2_I2S2SEL */ + else + { + } + return i2s_frequency; +} + +#if defined(LPUART1) || defined(LPUART2) +/** + * @brief Return LPUARTx clock frequency + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE (*) + * @retval LPUART clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + * (*) feature not available on all devices + */ +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource) +{ + uint32_t lpuart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPUART_CLKSOURCE(LPUARTxSource)); + + if (LPUARTxSource == LL_RCC_LPUART1_CLKSOURCE) + { + /* LPUART1CLK clock frequency */ + switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource)) + { + case LL_RCC_LPUART1_CLKSOURCE_SYSCLK: /* LPUART1 Clock is System Clock */ + lpuart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_LPUART1_CLKSOURCE_HSI: /* LPUART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lpuart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_LSE: /* LPUART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_PCLK1: /* LPUART1 Clock is PCLK1 */ + default: + lpuart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(LPUART2) + else if (LPUARTxSource == LL_RCC_LPUART2_CLKSOURCE) + { + /* LPUART2CLK clock frequency */ + switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource)) + { + case LL_RCC_LPUART2_CLKSOURCE_SYSCLK: /* LPUART2 Clock is System Clock */ + lpuart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_LPUART2_CLKSOURCE_HSI: /* LPUART2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lpuart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPUART2_CLKSOURCE_LSE: /* LPUART2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPUART2_CLKSOURCE_PCLK1: /* LPUART2 Clock is PCLK1 */ + default: + lpuart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* LPUART2 */ + else + { + } + + return lpuart_frequency; +} +#endif /* LPUART1 */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Return LPTIMx clock frequency + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @retval LPTIM clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready + */ +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource) +{ + uint32_t lptim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPTIM_CLKSOURCE(LPTIMxSource)); + + if (LPTIMxSource == LL_RCC_LPTIM1_CLKSOURCE) + { + /* LPTIM1CLK clock frequency */ + switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) + { + case LL_RCC_LPTIM1_CLKSOURCE_LSI: /* LPTIM1 Clock is LSI Osc. */ + if (LL_RCC_LSI_IsReady() == 1U) + { + lptim_frequency = LSI_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_HSI: /* LPTIM1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lptim_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_LSE: /* LPTIM1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lptim_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_PCLK1: /* LPTIM1 Clock is PCLK1 */ + default: + lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + else + { + /* LPTIM2CLK clock frequency */ + switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) + { + case LL_RCC_LPTIM2_CLKSOURCE_LSI: /* LPTIM2 Clock is LSI Osc. */ + if (LL_RCC_LSI_IsReady() == 1U) + { + lptim_frequency = LSI_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_HSI: /* LPTIM2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lptim_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_LSE: /* LPTIM2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lptim_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_PCLK1: /* LPTIM2 Clock is PCLK1 */ + default: + lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + + return lptim_frequency; +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Return TIMx clock frequency + * @param TIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE + * @endif + * @retval TIMx clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource) +{ + uint32_t tim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_TIM_CLKSOURCE(TIMxSource)); + + if (TIMxSource == LL_RCC_TIM1_CLKSOURCE) + { + /* TIM1CLK clock frequency */ + switch (LL_RCC_GetTIMClockSource(TIMxSource)) + { + case LL_RCC_TIM1_CLKSOURCE_PLL: /* TIM1 Clock is PLLQ */ + if (LL_RCC_PLL_IsReady() == 1U) + { + tim_frequency = RCC_PLL_GetFreqDomain_TIM1(); + } + break; + + case LL_RCC_TIM1_CLKSOURCE_PCLK1: /* TIM1 Clock is PCLK1 */ + default: + tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(TIM15) + else + { + if (TIMxSource == LL_RCC_TIM15_CLKSOURCE) + { + /* TIM15CLK clock frequency */ + switch (LL_RCC_GetTIMClockSource(TIMxSource)) + { + case LL_RCC_TIM15_CLKSOURCE_PLL: /* TIM1 Clock is PLLQ */ + if (LL_RCC_PLL_IsReady() == 1U) + { + tim_frequency = RCC_PLL_GetFreqDomain_TIM15(); + } + break; + + case LL_RCC_TIM15_CLKSOURCE_PCLK1: /* TIM15 Clock is PCLK1 */ + default: + tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + } +#endif /* TIM15 */ + return tim_frequency; +} +#endif /* RCC_CCIPR_TIM1SEL && RCC_CCIPR_TIM15SEL */ + + +#if defined(RNG) +/** + * @brief Return RNGx clock frequency + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval RNG clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource) +{ + uint32_t rng_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + uint32_t rngdiv; + + /* Check parameter */ + assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource)); + + /* RNGCLK clock frequency */ + switch (LL_RCC_GetRNGClockSource(RNGxSource)) + { + case LL_RCC_RNG_CLKSOURCE_PLL: /* PLL clock used as RNG clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + rng_frequency = RCC_PLL_GetFreqDomain_RNG(); + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + } + break; + + case LL_RCC_RNG_CLKSOURCE_HSI_DIV8: /* HSI clock divided by 8 used as RNG clock source */ + rng_frequency = HSI_VALUE / 8U; + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + break; + case LL_RCC_RNG_CLKSOURCE_SYSCLK: /* SYSCLK clock used as RNG clock source */ + rng_frequency = RCC_GetSystemClockFreq(); + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + break; + + case LL_RCC_RNG_CLKSOURCE_NONE: /* No clock used as RNG clock source */ + default: + rng_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + + } + + return rng_frequency; +} +#endif /* RNG */ + +#if defined(CEC) +/** + * @brief Return CEC clock frequency + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval CEC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource) +{ + uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource)); + + /* CECCLK clock frequency */ + switch (LL_RCC_GetCECClockSource(CECxSource)) + { + case LL_RCC_CEC_CLKSOURCE_LSE: /* CEC Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + cec_frequency = LSE_VALUE; + } + break; + + case LL_RCC_CEC_CLKSOURCE_HSI_DIV488: /* CEC Clock is HSI Osc. */ + default: + if (LL_RCC_HSI_IsReady() == 1U) + { + cec_frequency = (HSI_VALUE / 488U); + } + break; + } + + return cec_frequency; +} +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Return FDCANx clock frequency + * @param FDCANxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval FDCANx clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready + */ +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource) +{ + uint32_t fdcan_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_FDCAN_CLKSOURCE(FDCANxSource)); + + /* FDCANCLK clock frequency */ + switch (LL_RCC_GetFDCANClockSource(FDCANxSource)) + { + case LL_RCC_FDCAN_CLKSOURCE_PLL: /* FDCAN Clock is PLL "Q" Osc. */ + if (LL_RCC_PLL_IsReady() == 1U) + { + fdcan_frequency = RCC_PLL_GetFreqDomain_FDCAN(); + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_HSE: /* FDCAN Clock is HSE Osc. */ + if (LL_RCC_HSE_IsReady() == 1U) + { + fdcan_frequency = HSE_VALUE; + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_PCLK1: /* FDCAN Clock is PCLK1 */ + default: + fdcan_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + + return fdcan_frequency; +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Return ADCx clock frequency + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval ADC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource) +{ + uint32_t adc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource)); + + /* ADCCLK clock frequency */ + switch (LL_RCC_GetADCClockSource(ADCxSource)) + { + case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ + adc_frequency = RCC_GetSystemClockFreq(); + break; + case LL_RCC_ADC_CLKSOURCE_HSI : /* HSI clock used as ADC clock source */ + adc_frequency = HSI_VALUE; + break; + + case LL_RCC_ADC_CLKSOURCE_PLL: /* PLLP clock used as ADC clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + adc_frequency = RCC_PLL_GetFreqDomain_ADC(); + } + break; + default: + adc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return adc_frequency; +} + +/** + * @brief Return RTC clock frequency + * @retval RTC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (LSI, LSE or HSE) are not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetRTCClockFreq(void) +{ + uint32_t rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* RTCCLK clock frequency */ + switch (LL_RCC_GetRTCClockSource()) + { + case LL_RCC_RTC_CLKSOURCE_LSE: /* LSE clock used as RTC clock source */ + if (LL_RCC_LSE_IsReady() == 1U) + { + rtc_frequency = LSE_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_LSI: /* LSI clock used as RTC clock source */ + if (LL_RCC_LSI_IsReady() == 1U) + { + rtc_frequency = LSI_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_HSE_DIV32: /* HSE clock used as ADC clock source */ + rtc_frequency = HSE_VALUE / 32U; + break; + + case LL_RCC_RTC_CLKSOURCE_NONE: /* No clock used as RTC clock source */ + default: + rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return rtc_frequency; +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Return USBx clock frequency + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval USB clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI48) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource) +{ + uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource)); + + /* USBCLK clock frequency */ + switch (LL_RCC_GetUSBClockSource(USBxSource)) + { +#if defined(RCC_HSI48_SUPPORT) + case LL_RCC_USB_CLKSOURCE_HSI48: /* HSI48 used as USB clock source */ + if (LL_RCC_HSI48_IsReady() != 0U) + { + usb_frequency = HSI48_VALUE; + } + break; +#endif /* RCC_HSI48_SUPPORT */ + + case LL_RCC_USB_CLKSOURCE_HSE: /* HSE used as USB clock source */ + if (LL_RCC_HSE_IsReady() != 0U) + { + usb_frequency = HSE_VALUE; + } + break; + + case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ + if (LL_RCC_PLL_IsReady() != 0U) + { + usb_frequency = RCC_PLL_GetFreqDomain_USB(); + } + break; + + default: + usb_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return usb_frequency; +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx) */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock frequency + * @retval SYSTEM clock frequency (in Hz) + */ +uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency; + uint32_t hsidiv; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (LL_RCC_GetSysClkSource()) + { + case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ + frequency = HSE_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */ + frequency = RCC_PLL_GetFreqDomain_SYS(); + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + frequency = (HSI_VALUE / hsidiv); + break; + } + + return frequency; +} + +/** + * @brief Return HCLK clock frequency + * @param SYSCLK_Frequency SYSCLK clock frequency + * @retval HCLK clock frequency (in Hz) + */ +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) +{ + /* HCLK clock frequency */ + return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); +} + +/** + * @brief Return PCLK1 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK1 clock frequency (in Hz) + */ +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK1 clock frequency */ + return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); +} +/** + * @brief Return PLL clock frequency used for system domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_SYS(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllinputfreq = HSI_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); +} +/** + * @brief Return PLL clock frequency used for ADC domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_ADC(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + ADC Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Return PLL clock frequency used for FDCAN domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_FDCAN(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + FDCAN Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_FDCAN_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Return PLL clock frequency used for I2S1 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_I2S1(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + I2S1 Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_I2S1_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Return PLL clock frequency used for I2S2 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_I2S2(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + I2S2 Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_I2S2_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Return PLL clock frequency used for RNG domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_RNG(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + RNG Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_RNG_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Return PLL clock frequency used for USB domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_USB(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + RNG Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_USB_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Return PLL clock frequency used for TIM1 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_TIM1(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + TIM1 Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_TIM1_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Return PLL clock frequency used for TIM15 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_TIM15(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + TIM15 Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_TIM15_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c new file mode 100644 index 0000000..cc59db8 --- /dev/null +++ b/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c @@ -0,0 +1,1348 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usb.c + * @author MCD Application Team + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_LL_USB_DRIVER + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) +#if defined (USB_DRD_FS) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +static HAL_StatusTypeDef USB_CoreReset(USB_DRD_TypeDef *USBx); +static HAL_StatusTypeDef USB_HC_BULK_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t ch_reg, + uint32_t *len); + +static HAL_StatusTypeDef USB_HC_ISO_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t len); + +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_DRD_TypeDef *USBx) +{ + /* Disable Host Mode */ + USBx->CNTR &= ~USB_CNTR_HOST; + + /* Force Reset IP */ + USBx->CNTR |= USB_CNTR_USBRST; + + return HAL_OK; +} + +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg) +{ + UNUSED(cfg); + HAL_StatusTypeDef state; + + /* Reset after a PHY select */ + state = USB_CoreReset(USBx); + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + return state; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_DRD_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM | USB_CNTR_L1REQM; + + /* Set interrupt mask */ + USBx->CNTR = winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_DRD_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM | USB_CNTR_L1REQM; + + /* Clear interrupt mask */ + USBx->CNTR &= ~winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of the these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_DRD_TypeDef *USBx, USB_DRD_ModeTypeDef mode) +{ + if (mode == USB_DEVICE_MODE) + { + USBx->CNTR &= ~USB_CNTR_HOST; + } + else + { + USBx->CNTR |= USB_CNTR_HOST; + } + + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_DRD_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(cfg); + /* Force Reset */ + USBx->CNTR = USB_CNTR_USBRST; + + /* Release Reset */ + USBx->CNTR &= ~USB_CNTR_USBRST; + + /* Set the Device Mode */ + (void)USB_SetCurrentMode(USBx, USB_DEVICE_MODE); + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + return HAL_OK; +} + +#if defined (HAL_PCD_MODULE_ENABLED) +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t wEpRegVal; + + wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK; + + /* initialize Endpoint */ + switch (ep->type) + { + case EP_TYPE_CTRL: + wEpRegVal |= USB_EP_CONTROL; + break; + + case EP_TYPE_BULK: + wEpRegVal |= USB_EP_BULK; + break; + + case EP_TYPE_INTR: + wEpRegVal |= USB_EP_INTERRUPT; + break; + + case EP_TYPE_ISOC: + wEpRegVal |= USB_EP_ISOCHRONOUS; + break; + + default: + ret = HAL_ERROR; + break; + } + + PCD_SET_ENDPOINT(USBx, ep->num, (wEpRegVal | USB_EP_VTRX | USB_EP_VTTX)); + + PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); + + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + /*Set the endpoint Transmit buffer address */ + PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + } + else + { + /*Set the endpoint Receive buffer address */ + PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); + + /*Set the endpoint Receive buffer counter*/ + PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure VALID status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + /*Double Buffer*/ + else + { + /* Set the endpoint as double buffered */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* Set buffer address for double buffered mode */ + PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1); + + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return ret; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + /*Double Buffer*/ + else + { + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + PCD_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + uint32_t len; + uint16_t pmabuffer; + uint16_t wEPVal; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /*Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + } + else + { + len = ep->xfer_len; + } + + /* configure and validate Tx endpoint */ + if (ep->doublebuffer == 0U) + { + USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len); + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + } + else + { + /* double buffer bulk management */ + if (ep->type == EP_TYPE_BULK) + { + if (ep->xfer_len_db > ep->maxpacket) + { + /* enable double buffer */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the two first buffer in the Buffer0 & Buffer1 */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + /* auto Switch to single buffer mode when transfer xfer_len_db; + + /* disable double buffer mode */ + PCD_CLEAR_EP_DBUF(USBx, ep->num); + + /* Set Tx count with nbre of byte to be transmitted */ + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + }/* end if bulk double buffer */ + + /* manage isochronous double buffer IN mode */ + else + { + /* Write the data to the USB endpoint */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + } + + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + PCD_FreeUserBuffer(USBx, ep->num, ep->is_in); + } + } + + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); + } + else /* OUT endpoint */ + { + if (ep->doublebuffer == 0U) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + /* configure and validate Rx endpoint */ + PCD_SET_EP_RX_CNT(USBx, ep->num, len); + } + else + { + /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */ + /* Set the Double buffer counter */ + if (ep->type == EP_TYPE_BULK) + { + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket); + + /* Coming from ISR */ + if (ep->xfer_count != 0U) + { + /* update last value to check if there is blocking state */ + wEPVal = (uint16_t)PCD_GET_ENDPOINT(USBx, ep->num); + + /*Blocking State */ + if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || + (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) + { + PCD_FreeUserBuffer(USBx, ep->num, 0U); + } + } + } + /* iso out double */ + else if (ep->type == EP_TYPE_ISOC) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + } + else + { + return HAL_ERROR; + } + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + + return HAL_OK; +} + + +/** + * @brief USB_EPSetStall set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + if (ep->is_in != 0U) + { + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL); + } + else + { + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL); + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure VALID status for the Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + + return HAL_OK; +} +#endif + +/** + * @brief USB_StopDevice Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_DRD_TypeDef *USBx) +{ + /* disable all interrupts and force USB reset */ + USBx->CNTR = USB_CNTR_USBRST; + + /* clear interrupt status register */ + USBx->ISTR = 0U; + + /* switch-off device */ + USBx->CNTR = (USB_CNTR_USBRST | USB_CNTR_PDWN); + + return HAL_OK; +} + +/** + * @brief USB_SetDevAddress Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_DRD_TypeDef *USBx, uint8_t address) +{ + if (address == 0U) + { + /* set device address and enable function */ + USBx->DADDR = USB_DADDR_EF; + } + + return HAL_OK; +} + +/** + * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_DRD_TypeDef *USBx) +{ + /* Enabling DP Pull-UP bit to Connect internal PU resistor on USB DP line */ + USBx->BCDR |= USB_BCDR_DPPU; + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_DRD_TypeDef *USBx) +{ + /* Disable DP Pull-Up bit to disconnect the Internal PU resistor on USB DP line */ + USBx->BCDR &= ~(USB_BCDR_DPPU); + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts return the global USB interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts(USB_DRD_TypeDef *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->ISTR; + return tmpreg; +} + +/** + * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_DRD_TypeDef *USBx) +{ + USBx->CNTR |= USB_CNTR_L2RES; + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_DRD_TypeDef *USBx) +{ + USBx->CNTR &= ~USB_CNTR_L2RES; + + return HAL_OK; +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_WritePMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + UNUSED(USBx); + uint32_t count, tmp; + __IO uint32_t *pdwVal; + uint32_t NbWords = ((uint32_t)wNBytes + 3U) >> 2U; + /* Due to the PMA access 32bit only so the last non word data should be processed alone */ + uint16_t remaining_bytes = wNBytes % 4U; + uint8_t *pBuf = pbUsrBuf; + + /* Check if there is a remaining byte */ + if (remaining_bytes != 0U) + { + NbWords--; + } + + /* Get the PMA Buffer pointer */ + pdwVal = (__IO uint32_t *)(USB_DRD_PMAADDR + (uint32_t)wPMABufAddr); + + /* Write the Calculated Word into the PMA related Buffer */ + for (count = NbWords; count != 0U; count--) + { + *pdwVal = __UNALIGNED_UINT32_READ(pBuf); + pdwVal++; + /* Increment pBuf 4 Time as Word Increment */ + pBuf++; + pBuf++; + pBuf++; + pBuf++; + } + + /* When Number of data is not word aligned, write the remaining Byte */ + if (remaining_bytes != 0U) + { + count = 0U; + tmp = 0U; + + do + { + tmp = tmp | ((uint32_t)(*(uint8_t *)pBuf) << (8U * count)); + count++; + pBuf++; + remaining_bytes--; + } while (remaining_bytes != 0U); + + *pdwVal = tmp; + } +} + +/** + * @brief Copy data from packet memory area (PMA) to user memory buffer + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_ReadPMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + UNUSED(USBx); + uint32_t count, tmp; + __IO uint32_t *pdwVal; + uint32_t NbWords = ((uint32_t)wNBytes + 3U) >> 2U; + /*Due to the PMA access 32bit only so the last non word data should be processed alone */ + uint16_t remaining_bytes = wNBytes % 4U; + uint8_t *pBuf = pbUsrBuf; + + /* Get the PMA Buffer pointer */ + pdwVal = (__IO uint32_t *)(USB_DRD_PMAADDR + (uint32_t)wPMABufAddr); + + /* if nbre of byte is not word aligned decrement the nbre of word*/ + if (remaining_bytes != 0U) + { + NbWords--; + } + + /*Read the Calculated Word From the PMA related Buffer*/ + for (count = NbWords; count != 0U; count--) + { + __UNALIGNED_UINT32_WRITE(pBuf, *pdwVal); + + pdwVal++; + pBuf++; + pBuf++; + pBuf++; + pBuf++; + } + + /*When Number of data is not word aligned, read the remaining byte*/ + if (remaining_bytes != 0U) + { + count = 0U; + tmp = *(__IO uint32_t *)pdwVal; + do + { + *(uint8_t *)pBuf = (uint8_t)(tmp >> (8U * (uint8_t)(count))); + count++; + pBuf++; + remaining_bytes-- ; + } while (remaining_bytes != 0U); + } +} + + +/*------------------------------------------------------------------------*/ +/* HOST API */ +/*------------------------------------------------------------------------*/ + +/** + * @brief USB_HostInit Initializes the USB DRD controller registers + * for Host mode + * @param USBx Selected device + * @param cfg pointer to a USB_DRD_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg) +{ + UNUSED(cfg); + /* Clear All Pending Interrupt */ + USBx->ISTR = 0U; + + HAL_Delay(200); + + /* Disable all interrupts */ + USBx->CNTR &= ~(USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM | + USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON | + USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_L1REQM); + + /* Clear All Pending Interrupt */ + USBx->ISTR = 0U; + + /*Enable Global interrupt */ + USBx->CNTR |= (USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM | + USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON | + USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_L1REQM); + + /* Remove Reset */ + USBx->CNTR &= ~USB_CNTR_USBRST; + + return HAL_OK; +} + + +/** + * @brief USB_DRD_ResetPort : Reset Host Port + * @param USBx Selected device + * @retval HAL status + * @note (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(USB_DRD_TypeDef *USBx) +{ + /* Force USB Reset */ + USBx->CNTR |= USB_CNTR_USBRST; + HAL_Delay(100); + /* Release USB Reset */ + USBx->CNTR &= ~USB_CNTR_USBRST; + HAL_Delay(30); + + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx Selected device + * @retval speed Host speed + * This parameter can be one of these values + * @arg USB_DRD_SPEED_FULL Full speed mode + * @arg USB_DRD_SPEED_LOW Low speed mode + */ +uint32_t USB_GetHostSpeed(USB_DRD_TypeDef *USBx) +{ + if ((USBx->ISTR & USB_ISTR_LS_DCONN) != 0U) + { + return USB_DRD_SPEED_LS; + } + else + { + return USB_DRD_SPEED_FS; + } +} + +/** + * @brief Return Host Current Frame number + * @param USBx Selected device + * @retval current frame number + */ +uint32_t USB_GetCurrentFrame(USB_DRD_TypeDef *USBx) +{ + return USBx->FNR & 0x7FFU; +} + +/** + * @brief Set the channel Kind (Single/double buffer mode) + * @param USBx Selected device + * @param phy_ch_num Selected device + * @param db_state double state can be USB_DRD_DBUFF_ENBALE/USB_DRD_DBUFF_DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef USB_HC_DoubleBuffer(USB_DRD_TypeDef *USBx, + uint8_t phy_ch_num, uint8_t db_state) +{ + uint32_t tmp; + + if (db_state == USB_DRD_DBUFF_ENBALE) + { + tmp = (USB_DRD_GET_CHEP(USBx, phy_ch_num) | USB_CH_KIND) & USB_CHEP_DB_MSK; + } + else + { + tmp = USB_DRD_GET_CHEP(USBx, phy_ch_num) & (~USB_CH_KIND) & USB_CHEP_DB_MSK; + } + + /* Set the device speed in case using HUB FS with device LS */ + USB_DRD_SET_CHEP(USBx, phy_ch_num, tmp); + + return HAL_OK; +} + +/** + * @brief Initialize a host channel + * @param USBx Selected device + * @param phy_ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed + * This parameter can be one of these values: + * @arg USB_DRD_SPEED_FULL Full speed mode + * @arg USB_DRD_SPEED_LOW Low speed mode + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * @arg EP_TYPE_CTRL Control type + * @arg EP_TYPE_ISOC Isochronous type + * @arg EP_TYPE_BULK Bulk type + * @arg EP_TYPE_INTR Interrupt type + * @param mps Max Packet Size + * This parameter can be a value from 0 to 32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t wChRegVal; + + wChRegVal = USB_DRD_GET_CHEP(USBx, phy_ch_num) & USB_CH_T_MASK; + + /* initialize host Channel */ + switch (ep_type) + { + case EP_TYPE_CTRL: + wChRegVal |= USB_EP_CONTROL; + break; + + case EP_TYPE_BULK: + wChRegVal |= USB_EP_BULK; + break; + + case EP_TYPE_INTR: + wChRegVal |= USB_EP_INTERRUPT; + break; + + case EP_TYPE_ISOC: + wChRegVal |= USB_EP_ISOCHRONOUS; + break; + + default: + ret = HAL_ERROR; + break; + } + + wChRegVal &= ~USB_CHEP_DEVADDR; + wChRegVal |= (((uint32_t)dev_address << USB_CHEP_DEVADDR_Pos) | + ((uint32_t)epnum & 0x0FU)); + + /* Set the device speed in case using HUB FS with device LS */ + if (speed == USB_DRD_SPEED_LSFS) + { + wChRegVal |= USB_CHEP_LSEP; + } + + /* Set the dev_address & ep type */ + USB_DRD_SET_CHEP(USBx, phy_ch_num, (wChRegVal | USB_CH_VTRX | USB_CH_VTTX)); + + /*Set the Rx Count */ + USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, mps); + + return ret; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx Selected device + * @param hc pointer to host channel structure + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc) +{ + uint32_t len; + uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num; + uint32_t ch_reg = USB_DRD_GET_CHEP(USBx, phy_ch_num); + + if (hc->ch_dir == CH_IN_DIR) /* In Channel */ + { + /* Multi packet transfer */ + if (hc->xfer_len > hc->max_packet) + { + len = hc->max_packet; + } + else + { + len = hc->xfer_len; + } + + if (hc->doublebuffer == 0U) + { + /* Set RX buffer count */ + USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, len); + } + else if (hc->ep_type == EP_TYPE_BULK) + { + /* Double buffer activated */ + if ((hc->xfer_len > hc->max_packet)) + { + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_ENBALE); + + /*Set the Double buffer counter*/ + USB_DRD_SET_CHEP_DBUF_CNT(USBx, phy_ch_num, hc->ch_dir, len); + } + else /* switch to single buffer mode */ + { + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_DISABLE); + + /* Set RX buffer count */ + USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, len); + } + } + else /* isochronous */ + { + /*Set the Double buffer counter*/ + USB_DRD_SET_CHEP_DBUF_CNT(USBx, phy_ch_num, hc->ch_dir, len); + } + + /*Enable host channel */ + USB_DRD_SET_CHEP_RX_STATUS(USBx, phy_ch_num, USB_CHEP_RX_STRX); + } + else /* Out Channel */ + { + /* Multi packet transfer*/ + if (hc->xfer_len > hc->max_packet) + { + len = hc->max_packet; + } + else + { + len = hc->xfer_len; + } + + /* configure and validate Tx endpoint */ + if (hc->doublebuffer == 0U) + { + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaadress, (uint16_t)len); + USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)len); + /*SET PID SETUP */ + if ((hc->data_pid) == HC_PID_SETUP) + { + USB_DRD_CHEP_TX_SETUP(USBx, phy_ch_num); + } + } + else if (hc->ep_type == EP_TYPE_BULK) + { + (void)USB_HC_BULK_DB_StartXfer(USBx, hc, ch_reg, &len); + } + else + { + (void)USB_HC_ISO_DB_StartXfer(USBx, hc, len); + } + + /* Enable host channel */ + USB_DRD_SET_CHEP_TX_STATUS(USBx, hc->phy_ch_num, USB_CH_TX_VALID); + } + + return HAL_OK; +} +/** + * @brief Start Transfer of Channel isochronous out double buffer + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @param len Transfer Length + * @retval HAL state + */ +static HAL_StatusTypeDef USB_HC_ISO_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t len) +{ + uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num; + + /* check the DTOG_TX to determine in which buffer we should write */ + if ((USB_DRD_GET_CHEP(USBx, phy_ch_num) & USB_CH_DTOG_TX) != 0U) + { + if (hc->pmabuff1_state == USB_PMABUF_EMPTY) + { + /* Set the Double buffer counter for pmabuffer1 */ + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, hc->ch_dir, len); + hc->pmabuff1_state = USB_PMABUF_NOT_EMPTY; + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)len); + + if (hc->pmabuff0_state == USB_PMABUF_EMPTY) + { + hc->urb_state = URB_DONE; + } + } + else if (hc->pmabuff0_state == USB_PMABUF_EMPTY) + { + /* Set the Double buffer counter for pmabuffer0 */ + USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, hc->ch_dir, len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)len); + hc->pmabuff0_state = USB_PMABUF_NOT_EMPTY; + } + else + { + /* both buffer are not empty, should not be in this condition */ + /*...*/ + } + } + else + { + /* DTOGTX=0 */ + if (hc->pmabuff0_state == USB_PMABUF_EMPTY) + { + /* Set the Double buffer counter for pmabuffer0 */ + USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, hc->ch_dir, len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)len); + hc->pmabuff0_state = USB_PMABUF_NOT_EMPTY; + if (hc->pmabuff1_state == USB_PMABUF_EMPTY) + { + hc->urb_state = URB_DONE; + } + } + else if (hc->pmabuff1_state == USB_PMABUF_EMPTY) + { + /* Set the Double buffer counter for pmabuffer1 */ + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, hc->ch_dir, len); + hc->pmabuff1_state = USB_PMABUF_NOT_EMPTY; + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)len); + } + else + { + /*...*/ + } + } + + return HAL_OK; +} + +/** + * @brief Start Transfer of Channel bulk out double buffer + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @param ch_reg snapshot of the CHEPR register + * @param len Transfer Length + * @retval HAL state + */ +static HAL_StatusTypeDef USB_HC_BULK_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t ch_reg, + uint32_t *len) +{ + uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num; + + /* -Double Buffer Mangement- */ + if (hc->xfer_len_db > hc->max_packet) + { + /* enable double buffer mode */ + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_ENBALE); + *len = hc->max_packet; + hc->xfer_len_db -= *len; + + /* Prepare two buffer before enabling host */ + if ((ch_reg & USB_CH_DTOG_TX) == 0U) + { + /* Write Buffer0 */ + USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len); + } + else + { + /* Write Buffer1 */ + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, (uint8_t) phy_ch_num, 0U, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)*len); + } + + hc->xfer_buff += *len; + + /* Multi packet transfer */ + if (hc->xfer_len_db > hc->max_packet) + { + *len = hc->max_packet; + hc->xfer_len_db -= *len; + } + else + { + *len = hc->xfer_len_db; + hc->xfer_len_db = 0U; + } + + if ((ch_reg & USB_CH_DTOG_TX) == 0U) + { + /* Write Buffer1 */ + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, 0U, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)*len); + } + else + { + /* Write Buffer0 */ + USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len); + } + } + else + { + /* Disable double buffer mode */ + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_DISABLE); + + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len); + USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)*len); + } + + return HAL_OK; +} + +/** + * @brief Halt a host channel in + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_IN_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch) +{ + /* Set disable to Channel */ + USB_DRD_SET_CHEP_RX_STATUS(USBx, phy_ch, USB_CH_RX_DIS); + + return HAL_OK; +} +/** + * @brief Halt a host channel out + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_OUT_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch) +{ + /* Set disable to Channel */ + USB_DRD_SET_CHEP_TX_STATUS(USBx, phy_ch, USB_CH_TX_DIS); + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_DRD_TypeDef *USBx) +{ + USBx->ISTR &= ~(USB_ISTR_DIR | USB_ISTR_L1REQ | + USB_ISTR_ESOF | USB_ISTR_SOF | + USB_ISTR_RESET | USB_ISTR_DCON | + USB_ISTR_SUSP | USB_ISTR_WKUP | + USB_ISTR_ERR | USB_ISTR_PMAOVR | + USB_ISTR_CTR); + + /* Set PowerDown */ + USBx->CNTR |= USB_CNTR_PDWN; + + /* Force a Reset */ + USBx->CNTR |= USB_CNTR_USBRST; + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CDC/STM32G0C1VETX_FLASH.ld b/CDC/STM32G0C1VETX_FLASH.ld new file mode 100644 index 0000000..4c3b3ae --- /dev/null +++ b/CDC/STM32G0C1VETX_FLASH.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * Abstract : Linker script for STM32G0C1E-EV Board embedding STM32G0C1VETx Device from stm32g0 series + * 512Kbytes FLASH + * 144Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 144K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/CDC/STM32G0C1VETX_RAM.ld b/CDC/STM32G0C1VETX_RAM.ld new file mode 100644 index 0000000..c9d8a20 --- /dev/null +++ b/CDC/STM32G0C1VETX_RAM.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * Abstract : Linker script for STM32G0C1E-EV Board embedding STM32G0C1VETx Device from stm32g0 series + * 512Kbytes FLASH + * 144Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 144K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "RAM" Ram type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >RAM + + /* The program code and other data into "RAM" Ram type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >RAM + + /* Constant data into "RAM" Ram type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >RAM + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >RAM + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >RAM + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >RAM + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >RAM + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >RAM + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/LED/.cproject b/LED/.cproject new file mode 100644 index 0000000..0bc6028 --- /dev/null +++ b/LED/.cproject @@ -0,0 +1,202 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/LED/.mxproject b/LED/.mxproject new file mode 100644 index 0000000..a934c7c --- /dev/null +++ b/LED/.mxproject @@ -0,0 +1,25 @@ +[PreviousLibFiles] +LibFiles=Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h;Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_armv8mbl.h; + +[PreviousUsedCubeIDEFiles] +SourceFiles=Core/Src/main.c;Core/Src/stm32f0xx_it.c;Core/Src/stm32f0xx_hal_msp.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Core/Src/system_stm32f0xx.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Core/Src/system_stm32f0xx.c;Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c;; +HeaderPath=Drivers/STM32F0xx_HAL_Driver/Inc;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F0xx/Include;Drivers/CMSIS/Include;Core/Inc; +CDefines=USE_HAL_DRIVER;STM32F030x6;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=3 +HeaderFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Inc/stm32f0xx_it.h +HeaderFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Inc/stm32f0xx_hal_conf.h +HeaderFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Inc/main.h +HeaderFolderListSize=1 +HeaderPath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Inc +HeaderFiles=; +SourceFileListSize=3 +SourceFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Src/stm32f0xx_it.c +SourceFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Src/stm32f0xx_hal_msp.c +SourceFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Src/main.c +SourceFolderListSize=1 +SourcePath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/LED/Core/Src +SourceFiles=; + diff --git a/LED/.project b/LED/.project new file mode 100644 index 0000000..7737aa6 --- /dev/null +++ b/LED/.project @@ -0,0 +1,34 @@ + + + LED + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + com.st.stm32cube.ide.mcu.MCUProjectNature + com.st.stm32cube.ide.mcu.MCUCubeProjectNature + org.eclipse.cdt.core.cnature + org.eclipse.cdt.core.ccnature + com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature + com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature + com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature + com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature + com.st.stm32cube.ide.mcu.MCURootProjectNature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/LED/.settings/language.settings.xml b/LED/.settings/language.settings.xml new file mode 100644 index 0000000..a804a22 --- /dev/null +++ b/LED/.settings/language.settings.xml @@ -0,0 +1,27 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/LED/.settings/stm32cubeide.project.prefs b/LED/.settings/stm32cubeide.project.prefs new file mode 100644 index 0000000..c3aba1c --- /dev/null +++ b/LED/.settings/stm32cubeide.project.prefs @@ -0,0 +1,3 @@ +8DF89ED150041C4CBC7CB9A9CAA90856=49107D41B9D8B3F70076AA98DDE0F17D +DC22A860405A8BF2F2C095E5B6529F12=49107D41B9D8B3F70076AA98DDE0F17D +eclipse.preferences.version=1 diff --git a/LED/Core/Inc/main.h b/LED/Core/Inc/main.h new file mode 100644 index 0000000..0960dfd --- /dev/null +++ b/LED/Core/Inc/main.h @@ -0,0 +1,85 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define IN1_Pin GPIO_PIN_0 +#define IN1_GPIO_Port GPIOA +#define IN2_Pin GPIO_PIN_1 +#define IN2_GPIO_Port GPIOA +#define LED_Pin GPIO_PIN_2 +#define LED_GPIO_Port GPIOA +#define TEN_Pin GPIO_PIN_5 +#define TEN_GPIO_Port GPIOA +#define Button_Pin GPIO_PIN_6 +#define Button_GPIO_Port GPIOA +#define Relay1_Pin GPIO_PIN_7 +#define Relay1_GPIO_Port GPIOA +#define Relay2_Pin GPIO_PIN_1 +#define Relay2_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Core/Inc/stm32f0xx_hal_conf.h b/LED/Core/Inc/stm32f0xx_hal_conf.h new file mode 100644 index 0000000..309e8ea --- /dev/null +++ b/LED/Core/Inc/stm32f0xx_hal_conf.h @@ -0,0 +1,322 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_CONF_H +#define __STM32F0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + /*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_CAN_MODULE_ENABLED */ +/*#define HAL_CEC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_UART_MODULE_ENABLED */ +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator for ADC (HSI14) value. + */ +#if !defined (HSI14_VALUE) +#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI14_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSI) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */ + /* Warning: Must be set to higher priority for HAL_Delay() */ + /* and HAL_GetTick() usage under interrupt context */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 0 +#define DATA_CACHE_ENABLE 0 +#define USE_SPI_CRC 0U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f0xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Core/Inc/stm32f0xx_it.h b/LED/Core/Inc/stm32f0xx_it.h new file mode 100644 index 0000000..c7afed4 --- /dev/null +++ b/LED/Core/Inc/stm32f0xx_it.h @@ -0,0 +1,65 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f0xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_IT_H +#define __STM32F0xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void SVC_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Core/Src/.project b/LED/Core/Src/.project new file mode 100644 index 0000000..3470659 --- /dev/null +++ b/LED/Core/Src/.project @@ -0,0 +1,11 @@ + + + Src + + + + + + + + diff --git a/LED/Core/Src/main.c b/LED/Core/Src/main.c new file mode 100644 index 0000000..c899d1f --- /dev/null +++ b/LED/Core/Src/main.c @@ -0,0 +1,225 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_6)); + HAL_Delay(1000); + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOA, LED_Pin|TEN_Pin|Relay1_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pins : IN1_Pin IN2_Pin Button_Pin */ + GPIO_InitStruct.Pin = IN1_Pin|IN2_Pin|Button_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pins : LED_Pin TEN_Pin Relay1_Pin */ + GPIO_InitStruct.Pin = LED_Pin|TEN_Pin|Relay1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pin : Relay2_Pin */ + GPIO_InitStruct.Pin = Relay2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(Relay2_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : PA9 PA10 */ + GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF1_USART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Core/Src/stm32f0xx_hal_msp.c b/LED/Core/Src/stm32f0xx_hal_msp.c new file mode 100644 index 0000000..207fc34 --- /dev/null +++ b/LED/Core/Src/stm32f0xx_hal_msp.c @@ -0,0 +1,84 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f0xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Core/Src/stm32f0xx_it.c b/LED/Core/Src/stm32f0xx_it.c new file mode 100644 index 0000000..207e687 --- /dev/null +++ b/LED/Core/Src/stm32f0xx_it.c @@ -0,0 +1,147 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f0xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32f0xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M0 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVC_IRQn 0 */ + + /* USER CODE END SVC_IRQn 0 */ + /* USER CODE BEGIN SVC_IRQn 1 */ + + /* USER CODE END SVC_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32F0xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32f0xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Core/Src/syscalls.c b/LED/Core/Src/syscalls.c new file mode 100644 index 0000000..4ec9584 --- /dev/null +++ b/LED/Core/Src/syscalls.c @@ -0,0 +1,159 @@ +/** + ****************************************************************************** + * @file syscalls.c + * @author Auto-generated by STM32CubeIDE + * @brief STM32CubeIDE Minimal System calls file + * + * For more information about which c-functions + * need which of these lowlevel functions + * please consult the Newlib libc-manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include + + +/* Variables */ +//#undef errno +extern int errno; +extern int __io_putchar(int ch) __attribute__((weak)); +extern int __io_getchar(void) __attribute__((weak)); + +register char * stack_ptr asm("sp"); + +char *__env[1] = { 0 }; +char **environ = __env; + + +/* Functions */ +void initialise_monitor_handles() +{ +} + +int _getpid(void) +{ + return 1; +} + +int _kill(int pid, int sig) +{ + errno = EINVAL; + return -1; +} + +void _exit (int status) +{ + _kill(status, -1); + while (1) {} /* Make sure we hang here */ +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + *ptr++ = __io_getchar(); + } + +return len; +} + +__attribute__((weak)) int _write(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + __io_putchar(*ptr++); + } + return len; +} + +int _close(int file) +{ + return -1; +} + + +int _fstat(int file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _isatty(int file) +{ + return 1; +} + +int _lseek(int file, int ptr, int dir) +{ + return 0; +} + +int _open(char *path, int flags, ...) +{ + /* Pretend like we always fail */ + return -1; +} + +int _wait(int *status) +{ + errno = ECHILD; + return -1; +} + +int _unlink(char *name) +{ + errno = ENOENT; + return -1; +} + +int _times(struct tms *buf) +{ + return -1; +} + +int _stat(char *file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _link(char *old, char *new) +{ + errno = EMLINK; + return -1; +} + +int _fork(void) +{ + errno = EAGAIN; + return -1; +} + +int _execve(char *name, char **argv, char **env) +{ + errno = ENOMEM; + return -1; +} diff --git a/LED/Core/Src/sysmem.c b/LED/Core/Src/sysmem.c new file mode 100644 index 0000000..d7cc52c --- /dev/null +++ b/LED/Core/Src/sysmem.c @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file sysmem.c + * @author Generated by STM32CubeIDE + * @brief STM32CubeIDE System Memory calls file + * + * For more information about which C functions + * need which of these lowlevel functions + * please consult the newlib libc manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include + +/** + * Pointer to the current high watermark of the heap usage + */ +static uint8_t *__sbrk_heap_end = NULL; + +/** + * @brief _sbrk() allocates memory to the newlib heap and is used by malloc + * and others from the C library + * + * @verbatim + * ############################################################################ + * # .data # .bss # newlib heap # MSP stack # + * # # # # Reserved by _Min_Stack_Size # + * ############################################################################ + * ^-- RAM start ^-- _end _estack, RAM end --^ + * @endverbatim + * + * This implementation starts allocating at the '_end' linker symbol + * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack + * The implementation considers '_estack' linker symbol to be RAM end + * NOTE: If the MSP stack, at any point during execution, grows larger than the + * reserved size, please increase the '_Min_Stack_Size'. + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + const uint8_t *max_heap = (uint8_t *)stack_limit; + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + { + __sbrk_heap_end = &_end; + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + { + errno = ENOMEM; + return (void *)-1; + } + + prev_heap_end = __sbrk_heap_end; + __sbrk_heap_end += incr; + + return (void *)prev_heap_end; +} diff --git a/LED/Core/Src/system_stm32f0xx.c b/LED/Core/Src/system_stm32f0xx.c new file mode 100644 index 0000000..1b0fbe5 --- /dev/null +++ b/LED/Core/Src/system_stm32f0xx.c @@ -0,0 +1,247 @@ +/** + ****************************************************************************** + * @file system_stm32f0xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f0xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx_system + * @{ + */ + +/** @addtogroup STM32F0xx_System_Private_Includes + * @{ + */ + +#include "stm32f0xx.h" + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Defines + * @{ + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI_VALUE */ + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI48_VALUE */ +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 8000000; + +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* NOTE :SystemInit(): This function is called at startup just after reset and + before branch to main program. This call is made inside + the "startup_stm32f0xx.s" file. + User can setups the default system clock (System clock source, PLL Multiplier + and Divider factors, AHB/APBx prescalers and Flash settings). + */ +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case RCC_CFGR_SWS_HSE: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case RCC_CFGR_SWS_PLL: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMUL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1; + + if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV) + { + /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */ + SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull; + } +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) + else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV) + { + /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */ + SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull; + } +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */ + else + { +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \ + || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \ + || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */ + SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull; +#else + /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || + STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || + STM32F091xC || STM32F098xx || STM32F030xC */ + } + break; + default: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Core/Startup/startup_stm32f030f4px.s b/LED/Core/Startup/startup_stm32f030f4px.s new file mode 100644 index 0000000..727c24d --- /dev/null +++ b/LED/Core/Startup/startup_stm32f030f4px.s @@ -0,0 +1,258 @@ +/** + ****************************************************************************** + * @file startup_stm32f030x6.s + * @author MCD Application Team + * @brief STM32F030x4/STM32F030x6 devices vector table for GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler /* Window WatchDog */ + .word 0 /* Reserved */ + .word RTC_IRQHandler /* RTC through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ + .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ + .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ + .word 0 /* Reserved */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ + .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ + .word ADC1_IRQHandler /* ADC1 */ + .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word 0 /* Reserved */ + .word TIM3_IRQHandler /* TIM3 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word TIM14_IRQHandler /* TIM14 */ + .word 0 /* Reserved */ + .word TIM16_IRQHandler /* TIM16 */ + .word TIM17_IRQHandler /* TIM17 */ + .word I2C1_IRQHandler /* I2C1 */ + .word 0 /* Reserved */ + .word SPI1_IRQHandler /* SPI1 */ + .word 0 /* Reserved */ + .word USART1_IRQHandler /* USART1 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Debug/Core/Src/main.d b/LED/Debug/Core/Src/main.d new file mode 100644 index 0000000..087124b --- /dev/null +++ b/LED/Debug/Core/Src/main.d @@ -0,0 +1,78 @@ +Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Core/Inc/main.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Core/Src/main.o b/LED/Debug/Core/Src/main.o new file mode 100644 index 0000000..a6de41d Binary files /dev/null and b/LED/Debug/Core/Src/main.o differ diff --git a/LED/Debug/Core/Src/main.su b/LED/Debug/Core/Src/main.su new file mode 100644 index 0000000..8bf3696 --- /dev/null +++ b/LED/Debug/Core/Src/main.su @@ -0,0 +1,4 @@ +main.c:64:5:main 8 static +main.c:109:6:SystemClock_Config 80 static +main.c:144:13:MX_GPIO_Init 48 static +main.c:197:6:Error_Handler 8 static,ignoring_inline_asm diff --git a/LED/Debug/Core/Src/stm32f0xx_hal_msp.d b/LED/Debug/Core/Src/stm32f0xx_hal_msp.d new file mode 100644 index 0000000..62a4406 --- /dev/null +++ b/LED/Debug/Core/Src/stm32f0xx_hal_msp.d @@ -0,0 +1,78 @@ +Core/Src/stm32f0xx_hal_msp.o: ../Core/Src/stm32f0xx_hal_msp.c \ + ../Core/Inc/main.h ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Core/Inc/main.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Core/Src/stm32f0xx_hal_msp.o b/LED/Debug/Core/Src/stm32f0xx_hal_msp.o new file mode 100644 index 0000000..4cd5e63 Binary files /dev/null and b/LED/Debug/Core/Src/stm32f0xx_hal_msp.o differ diff --git a/LED/Debug/Core/Src/stm32f0xx_hal_msp.su b/LED/Debug/Core/Src/stm32f0xx_hal_msp.su new file mode 100644 index 0000000..994fa07 --- /dev/null +++ b/LED/Debug/Core/Src/stm32f0xx_hal_msp.su @@ -0,0 +1 @@ +stm32f0xx_hal_msp.c:64:6:HAL_MspInit 16 static diff --git a/LED/Debug/Core/Src/stm32f0xx_it.d b/LED/Debug/Core/Src/stm32f0xx_it.d new file mode 100644 index 0000000..d841325 --- /dev/null +++ b/LED/Debug/Core/Src/stm32f0xx_it.d @@ -0,0 +1,81 @@ +Core/Src/stm32f0xx_it.o: ../Core/Src/stm32f0xx_it.c ../Core/Inc/main.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Core/Inc/stm32f0xx_it.h + +../Core/Inc/main.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Core/Inc/stm32f0xx_it.h: diff --git a/LED/Debug/Core/Src/stm32f0xx_it.o b/LED/Debug/Core/Src/stm32f0xx_it.o new file mode 100644 index 0000000..9826aa7 Binary files /dev/null and b/LED/Debug/Core/Src/stm32f0xx_it.o differ diff --git a/LED/Debug/Core/Src/stm32f0xx_it.su b/LED/Debug/Core/Src/stm32f0xx_it.su new file mode 100644 index 0000000..105da51 --- /dev/null +++ b/LED/Debug/Core/Src/stm32f0xx_it.su @@ -0,0 +1,5 @@ +stm32f0xx_it.c:70:6:NMI_Handler 8 static +stm32f0xx_it.c:85:6:HardFault_Handler 8 static +stm32f0xx_it.c:100:6:SVC_Handler 8 static +stm32f0xx_it.c:113:6:PendSV_Handler 8 static +stm32f0xx_it.c:126:6:SysTick_Handler 8 static diff --git a/LED/Debug/Core/Src/subdir.mk b/LED/Debug/Core/Src/subdir.mk new file mode 100644 index 0000000..8250352 --- /dev/null +++ b/LED/Debug/Core/Src/subdir.mk @@ -0,0 +1,44 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Core/Src/main.c \ +../Core/Src/stm32f0xx_hal_msp.c \ +../Core/Src/stm32f0xx_it.c \ +../Core/Src/syscalls.c \ +../Core/Src/sysmem.c \ +../Core/Src/system_stm32f0xx.c + +C_DEPS += \ +./Core/Src/main.d \ +./Core/Src/stm32f0xx_hal_msp.d \ +./Core/Src/stm32f0xx_it.d \ +./Core/Src/syscalls.d \ +./Core/Src/sysmem.d \ +./Core/Src/system_stm32f0xx.d + +OBJS += \ +./Core/Src/main.o \ +./Core/Src/stm32f0xx_hal_msp.o \ +./Core/Src/stm32f0xx_it.o \ +./Core/Src/syscalls.o \ +./Core/Src/sysmem.o \ +./Core/Src/system_stm32f0xx.o + + +# Each subdirectory must supply rules for building sources it contributes +Core/Src/main.o: ../Core/Src/main.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/stm32f0xx_hal_msp.o: ../Core/Src/stm32f0xx_hal_msp.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f0xx_hal_msp.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/stm32f0xx_it.o: ../Core/Src/stm32f0xx_it.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f0xx_it.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/syscalls.o: ../Core/Src/syscalls.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/syscalls.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/sysmem.o: ../Core/Src/sysmem.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/sysmem.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/system_stm32f0xx.o: ../Core/Src/system_stm32f0xx.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/system_stm32f0xx.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/LED/Debug/Core/Src/syscalls.d b/LED/Debug/Core/Src/syscalls.d new file mode 100644 index 0000000..8667c70 --- /dev/null +++ b/LED/Debug/Core/Src/syscalls.d @@ -0,0 +1 @@ +Core/Src/syscalls.o: ../Core/Src/syscalls.c diff --git a/LED/Debug/Core/Src/syscalls.o b/LED/Debug/Core/Src/syscalls.o new file mode 100644 index 0000000..84db030 Binary files /dev/null and b/LED/Debug/Core/Src/syscalls.o differ diff --git a/LED/Debug/Core/Src/syscalls.su b/LED/Debug/Core/Src/syscalls.su new file mode 100644 index 0000000..2a6e0d7 --- /dev/null +++ b/LED/Debug/Core/Src/syscalls.su @@ -0,0 +1,18 @@ +syscalls.c:48:6:initialise_monitor_handles 8 static +syscalls.c:52:5:_getpid 8 static +syscalls.c:57:5:_kill 16 static +syscalls.c:63:6:_exit 16 static +syscalls.c:69:27:_read 32 static +syscalls.c:81:27:_write 32 static +syscalls.c:92:5:_close 16 static +syscalls.c:98:5:_fstat 16 static +syscalls.c:104:5:_isatty 16 static +syscalls.c:109:5:_lseek 24 static +syscalls.c:114:5:_open 20 static +syscalls.c:120:5:_wait 16 static +syscalls.c:126:5:_unlink 16 static +syscalls.c:132:5:_times 16 static +syscalls.c:137:5:_stat 16 static +syscalls.c:143:5:_link 16 static +syscalls.c:149:5:_fork 8 static +syscalls.c:155:5:_execve 24 static diff --git a/LED/Debug/Core/Src/sysmem.d b/LED/Debug/Core/Src/sysmem.d new file mode 100644 index 0000000..74fecf9 --- /dev/null +++ b/LED/Debug/Core/Src/sysmem.d @@ -0,0 +1 @@ +Core/Src/sysmem.o: ../Core/Src/sysmem.c diff --git a/LED/Debug/Core/Src/sysmem.o b/LED/Debug/Core/Src/sysmem.o new file mode 100644 index 0000000..8ec428c Binary files /dev/null and b/LED/Debug/Core/Src/sysmem.o differ diff --git a/LED/Debug/Core/Src/sysmem.su b/LED/Debug/Core/Src/sysmem.su new file mode 100644 index 0000000..4474c68 --- /dev/null +++ b/LED/Debug/Core/Src/sysmem.su @@ -0,0 +1 @@ +sysmem.c:54:7:_sbrk 32 static diff --git a/LED/Debug/Core/Src/system_stm32f0xx.d b/LED/Debug/Core/Src/system_stm32f0xx.d new file mode 100644 index 0000000..e20f9a2 --- /dev/null +++ b/LED/Debug/Core/Src/system_stm32f0xx.d @@ -0,0 +1,76 @@ +Core/Src/system_stm32f0xx.o: ../Core/Src/system_stm32f0xx.c \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Core/Src/system_stm32f0xx.o b/LED/Debug/Core/Src/system_stm32f0xx.o new file mode 100644 index 0000000..52713dd Binary files /dev/null and b/LED/Debug/Core/Src/system_stm32f0xx.o differ diff --git a/LED/Debug/Core/Src/system_stm32f0xx.su b/LED/Debug/Core/Src/system_stm32f0xx.su new file mode 100644 index 0000000..2304684 --- /dev/null +++ b/LED/Debug/Core/Src/system_stm32f0xx.su @@ -0,0 +1,2 @@ +system_stm32f0xx.c:128:6:SystemInit 8 static +system_stm32f0xx.c:174:6:SystemCoreClockUpdate 24 static diff --git a/LED/Debug/Core/Startup/startup_stm32f030f4px.d b/LED/Debug/Core/Startup/startup_stm32f030f4px.d new file mode 100644 index 0000000..fbe3d71 --- /dev/null +++ b/LED/Debug/Core/Startup/startup_stm32f030f4px.d @@ -0,0 +1,2 @@ +Core/Startup/startup_stm32f030f4px.o: \ + ../Core/Startup/startup_stm32f030f4px.s diff --git a/LED/Debug/Core/Startup/startup_stm32f030f4px.o b/LED/Debug/Core/Startup/startup_stm32f030f4px.o new file mode 100644 index 0000000..f70d7e0 Binary files /dev/null and b/LED/Debug/Core/Startup/startup_stm32f030f4px.o differ diff --git a/LED/Debug/Core/Startup/subdir.mk b/LED/Debug/Core/Startup/subdir.mk new file mode 100644 index 0000000..f9d3da2 --- /dev/null +++ b/LED/Debug/Core/Startup/subdir.mk @@ -0,0 +1,19 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +S_SRCS += \ +../Core/Startup/startup_stm32f030f4px.s + +S_DEPS += \ +./Core/Startup/startup_stm32f030f4px.d + +OBJS += \ +./Core/Startup/startup_stm32f030f4px.o + + +# Each subdirectory must supply rules for building sources it contributes +Core/Startup/startup_stm32f030f4px.o: ../Core/Startup/startup_stm32f030f4px.s + arm-none-eabi-gcc -mcpu=cortex-m0 -g3 -c -x assembler-with-cpp -MMD -MP -MF"Core/Startup/startup_stm32f030f4px.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<" + diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d new file mode 100644 index 0000000..9b32d12 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o new file mode 100644 index 0000000..4179a9b Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su new file mode 100644 index 0000000..0deff80 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su @@ -0,0 +1,23 @@ +stm32f0xx_hal.c:141:19:HAL_Init 8 static +stm32f0xx_hal.c:165:19:HAL_DeInit 8 static +stm32f0xx_hal.c:188:13:HAL_MspInit 8 static +stm32f0xx_hal.c:199:13:HAL_MspDeInit 8 static +stm32f0xx_hal.c:222:26:HAL_InitTick 24 static +stm32f0xx_hal.c:281:13:HAL_IncTick 8 static +stm32f0xx_hal.c:292:17:HAL_GetTick 8 static +stm32f0xx_hal.c:301:10:HAL_GetTickPrio 8 static +stm32f0xx_hal.c:310:19:HAL_SetTickFreq 32 static +stm32f0xx_hal.c:342:21:HAL_GetTickFreq 8 static +stm32f0xx_hal.c:358:13:HAL_Delay 24 static +stm32f0xx_hal.c:384:13:HAL_SuspendTick 8 static +stm32f0xx_hal.c:401:13:HAL_ResumeTick 8 static +stm32f0xx_hal.c:411:10:HAL_GetHalVersion 8 static +stm32f0xx_hal.c:420:10:HAL_GetREVID 8 static +stm32f0xx_hal.c:429:10:HAL_GetDEVID 8 static +stm32f0xx_hal.c:438:10:HAL_GetUIDw0 8 static +stm32f0xx_hal.c:447:10:HAL_GetUIDw1 8 static +stm32f0xx_hal.c:456:10:HAL_GetUIDw2 8 static +stm32f0xx_hal.c:465:6:HAL_DBGMCU_EnableDBGStopMode 8 static +stm32f0xx_hal.c:474:6:HAL_DBGMCU_DisableDBGStopMode 8 static +stm32f0xx_hal.c:483:6:HAL_DBGMCU_EnableDBGStandbyMode 8 static +stm32f0xx_hal.c:492:6:HAL_DBGMCU_DisableDBGStandbyMode 8 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d new file mode 100644 index 0000000..750c6ff --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o new file mode 100644 index 0000000..9253730 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su new file mode 100644 index 0000000..9fe77bd --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su @@ -0,0 +1,21 @@ +core_cm0.h:623:22:__NVIC_EnableIRQ 16 static +core_cm0.h:659:22:__NVIC_DisableIRQ 16 static,ignoring_inline_asm +core_cm0.h:678:26:__NVIC_GetPendingIRQ 16 static +core_cm0.h:697:22:__NVIC_SetPendingIRQ 16 static +core_cm0.h:712:22:__NVIC_ClearPendingIRQ 16 static +core_cm0.h:730:22:__NVIC_SetPriority 24 static +core_cm0.h:754:26:__NVIC_GetPriority 16 static +core_cm0.h:856:34:__NVIC_SystemReset 8 static,ignoring_inline_asm +core_cm0.h:920:26:SysTick_Config 16 static +stm32f0xx_hal_cortex.c:136:6:HAL_NVIC_SetPriority 24 static +stm32f0xx_hal_cortex.c:152:6:HAL_NVIC_EnableIRQ 16 static +stm32f0xx_hal_cortex.c:168:6:HAL_NVIC_DisableIRQ 16 static +stm32f0xx_hal_cortex.c:181:6:HAL_NVIC_SystemReset 8 static +stm32f0xx_hal_cortex.c:194:10:HAL_SYSTICK_Config 16 static +stm32f0xx_hal_cortex.c:226:10:HAL_NVIC_GetPriority 16 static +stm32f0xx_hal_cortex.c:239:6:HAL_NVIC_SetPendingIRQ 16 static +stm32f0xx_hal_cortex.c:257:10:HAL_NVIC_GetPendingIRQ 16 static +stm32f0xx_hal_cortex.c:273:6:HAL_NVIC_ClearPendingIRQ 16 static +stm32f0xx_hal_cortex.c:290:6:HAL_SYSTICK_CLKSourceConfig 16 static +stm32f0xx_hal_cortex.c:308:6:HAL_SYSTICK_IRQHandler 8 static +stm32f0xx_hal_cortex.c:317:13:HAL_SYSTICK_Callback 8 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d new file mode 100644 index 0000000..6158fa4 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o new file mode 100644 index 0000000..47fc32e Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su new file mode 100644 index 0000000..c1baa6b --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su @@ -0,0 +1,14 @@ +stm32f0xx_hal_dma.c:138:19:HAL_DMA_Init 24 static +stm32f0xx_hal_dma.c:200:19:HAL_DMA_DeInit 16 static +stm32f0xx_hal_dma.c:282:19:HAL_DMA_Start 32 static +stm32f0xx_hal_dma.c:329:19:HAL_DMA_Start_IT 32 static +stm32f0xx_hal_dma.c:385:19:HAL_DMA_Abort 16 static +stm32f0xx_hal_dma.c:423:19:HAL_DMA_Abort_IT 24 static +stm32f0xx_hal_dma.c:469:19:HAL_DMA_PollForTransfer 32 static +stm32f0xx_hal_dma.c:570:6:HAL_DMA_IRQHandler 24 static +stm32f0xx_hal_dma.c:662:19:HAL_DMA_RegisterCallback 32 static +stm32f0xx_hal_dma.c:713:19:HAL_DMA_UnRegisterCallback 24 static +stm32f0xx_hal_dma.c:789:22:HAL_DMA_GetState 16 static +stm32f0xx_hal_dma.c:800:10:HAL_DMA_GetError 16 static +stm32f0xx_hal_dma.c:826:13:DMA_SetConfig 24 static +stm32f0xx_hal_dma.c:860:13:DMA_CalcBaseAndBitshift 16 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d new file mode 100644 index 0000000..76b58f3 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o new file mode 100644 index 0000000..5ab9c1f Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su new file mode 100644 index 0000000..1329b3c --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su @@ -0,0 +1,9 @@ +stm32f0xx_hal_exti.c:143:19:HAL_EXTI_SetConfigLine 32 static +stm32f0xx_hal_exti.c:238:19:HAL_EXTI_GetConfigLine 32 static +stm32f0xx_hal_exti.c:327:19:HAL_EXTI_ClearConfigLine 32 static +stm32f0xx_hal_exti.c:380:19:HAL_EXTI_RegisterCallback 32 static +stm32f0xx_hal_exti.c:405:19:HAL_EXTI_GetHandle 16 static +stm32f0xx_hal_exti.c:445:6:HAL_EXTI_IRQHandler 24 static +stm32f0xx_hal_exti.c:477:10:HAL_EXTI_GetPending 32 static +stm32f0xx_hal_exti.c:506:6:HAL_EXTI_ClearPending 24 static +stm32f0xx_hal_exti.c:527:6:HAL_EXTI_GenerateSWI 24 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d new file mode 100644 index 0000000..2eb18d4 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o new file mode 100644 index 0000000..99fa3d0 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su new file mode 100644 index 0000000..c7142e1 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su @@ -0,0 +1,14 @@ +stm32f0xx_hal_flash.c:167:19:HAL_FLASH_Program 48 static +stm32f0xx_hal_flash.c:239:19:HAL_FLASH_Program_IT 40 static +stm32f0xx_hal_flash.c:285:6:HAL_FLASH_IRQHandler 24 static +stm32f0xx_hal_flash.c:428:13:HAL_FLASH_EndOfOperationCallback 16 static +stm32f0xx_hal_flash.c:446:13:HAL_FLASH_OperationErrorCallback 16 static +stm32f0xx_hal_flash.c:479:19:HAL_FLASH_Unlock 16 static +stm32f0xx_hal_flash.c:503:19:HAL_FLASH_Lock 8 static +stm32f0xx_hal_flash.c:515:19:HAL_FLASH_OB_Unlock 8 static +stm32f0xx_hal_flash.c:535:19:HAL_FLASH_OB_Lock 8 static +stm32f0xx_hal_flash.c:548:19:HAL_FLASH_OB_Launch 8 static +stm32f0xx_hal_flash.c:580:10:HAL_FLASH_GetError 8 static +stm32f0xx_hal_flash.c:603:13:FLASH_Program_HalfWord 16 static +stm32f0xx_hal_flash.c:620:19:FLASH_WaitForLastOperation 24 static +stm32f0xx_hal_flash.c:663:13:FLASH_SetErrorCode 16 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d new file mode 100644 index 0000000..f2b6d4a --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o new file mode 100644 index 0000000..ec0c095 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su new file mode 100644 index 0000000..8e5b1da --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su @@ -0,0 +1,16 @@ +stm32f0xx_hal_flash_ex.c:159:19:HAL_FLASHEx_Erase 32 static +stm32f0xx_hal_flash_ex.c:240:19:HAL_FLASHEx_Erase_IT 24 static +stm32f0xx_hal_flash_ex.c:313:19:HAL_FLASHEx_OBErase 24 static +stm32f0xx_hal_flash_ex.c:362:19:HAL_FLASHEx_OBProgram 32 static +stm32f0xx_hal_flash_ex.c:443:6:HAL_FLASHEx_OBGetConfig 16 static +stm32f0xx_hal_flash_ex.c:465:10:HAL_FLASHEx_OBGetUserData 24 static +stm32f0xx_hal_flash_ex.c:500:13:FLASH_MassErase 8 static +stm32f0xx_hal_flash_ex.c:521:26:FLASH_OB_EnableWRP 32 static +stm32f0xx_hal_flash_ex.c:637:26:FLASH_OB_DisableWRP 32 static +stm32f0xx_hal_flash_ex.c:751:26:FLASH_OB_RDP_LevelConfig 32 static +stm32f0xx_hal_flash_ex.c:802:26:FLASH_OB_UserConfig 32 static +stm32f0xx_hal_flash_ex.c:857:26:FLASH_OB_ProgramData 32 static +stm32f0xx_hal_flash_ex.c:890:17:FLASH_OB_GetWRP 8 static +stm32f0xx_hal_flash_ex.c:904:17:FLASH_OB_GetRDP 16 static +stm32f0xx_hal_flash_ex.c:931:16:FLASH_OB_GetUser 8 static +stm32f0xx_hal_flash_ex.c:960:6:FLASH_PageErase 16 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d new file mode 100644 index 0000000..0cd7cbf --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o new file mode 100644 index 0000000..ad9c6a4 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su new file mode 100644 index 0000000..457c393 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su @@ -0,0 +1,8 @@ +stm32f0xx_hal_gpio.c:177:6:HAL_GPIO_Init 32 static +stm32f0xx_hal_gpio.c:302:6:HAL_GPIO_DeInit 32 static +stm32f0xx_hal_gpio.c:385:15:HAL_GPIO_ReadPin 24 static +stm32f0xx_hal_gpio.c:418:6:HAL_GPIO_WritePin 16 static +stm32f0xx_hal_gpio.c:440:6:HAL_GPIO_TogglePin 24 static +stm32f0xx_hal_gpio.c:465:19:HAL_GPIO_LockPin 24 static +stm32f0xx_hal_gpio.c:500:6:HAL_GPIO_EXTI_IRQHandler 16 static +stm32f0xx_hal_gpio.c:515:13:HAL_GPIO_EXTI_Callback 16 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d new file mode 100644 index 0000000..57698d8 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o new file mode 100644 index 0000000..8a4c604 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su new file mode 100644 index 0000000..f9394d0 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su @@ -0,0 +1,79 @@ +stm32f0xx_hal_i2c.c:476:19:HAL_I2C_Init 16 static +stm32f0xx_hal_i2c.c:585:19:HAL_I2C_DeInit 16 static +stm32f0xx_hal_i2c.c:631:13:HAL_I2C_MspInit 16 static +stm32f0xx_hal_i2c.c:647:13:HAL_I2C_MspDeInit 16 static +stm32f0xx_hal_i2c.c:1068:19:HAL_I2C_Master_Transmit 48 static +stm32f0xx_hal_i2c.c:1183:19:HAL_I2C_Master_Receive 48 static +stm32f0xx_hal_i2c.c:1297:19:HAL_I2C_Slave_Transmit 40 static +stm32f0xx_hal_i2c.c:1434:19:HAL_I2C_Slave_Receive 40 static +stm32f0xx_hal_i2c.c:1560:19:HAL_I2C_Master_Transmit_IT 48 static +stm32f0xx_hal_i2c.c:1630:19:HAL_I2C_Master_Receive_IT 48 static +stm32f0xx_hal_i2c.c:1697:19:HAL_I2C_Slave_Transmit_IT 24 static +stm32f0xx_hal_i2c.c:1746:19:HAL_I2C_Slave_Receive_IT 24 static +stm32f0xx_hal_i2c.c:1797:19:HAL_I2C_Master_Transmit_DMA 48 static +stm32f0xx_hal_i2c.c:1941:19:HAL_I2C_Master_Receive_DMA 48 static +stm32f0xx_hal_i2c.c:2083:19:HAL_I2C_Slave_Transmit_DMA 40 static +stm32f0xx_hal_i2c.c:2186:19:HAL_I2C_Slave_Receive_DMA 40 static +stm32f0xx_hal_i2c.c:2293:19:HAL_I2C_Mem_Write 48 static +stm32f0xx_hal_i2c.c:2428:19:HAL_I2C_Mem_Read 48 static +stm32f0xx_hal_i2c.c:2561:19:HAL_I2C_Mem_Write_IT 48 static +stm32f0xx_hal_i2c.c:2653:19:HAL_I2C_Mem_Read_IT 48 static +stm32f0xx_hal_i2c.c:2744:19:HAL_I2C_Mem_Write_DMA 56 static +stm32f0xx_hal_i2c.c:2889:19:HAL_I2C_Mem_Read_DMA 56 static +stm32f0xx_hal_i2c.c:3031:19:HAL_I2C_IsDeviceReady 48 static +stm32f0xx_hal_i2c.c:3172:19:HAL_I2C_Master_Seq_Transmit_IT 48 static +stm32f0xx_hal_i2c.c:3257:19:HAL_I2C_Master_Seq_Transmit_DMA 56 static +stm32f0xx_hal_i2c.c:3420:19:HAL_I2C_Master_Seq_Receive_IT 48 static +stm32f0xx_hal_i2c.c:3505:19:HAL_I2C_Master_Seq_Receive_DMA 56 static +stm32f0xx_hal_i2c.c:3666:19:HAL_I2C_Slave_Seq_Transmit_IT 24 static +stm32f0xx_hal_i2c.c:3762:19:HAL_I2C_Slave_Seq_Transmit_DMA 40 static +stm32f0xx_hal_i2c.c:3942:19:HAL_I2C_Slave_Seq_Receive_IT 24 static +stm32f0xx_hal_i2c.c:4038:19:HAL_I2C_Slave_Seq_Receive_DMA 40 static +stm32f0xx_hal_i2c.c:4214:19:HAL_I2C_EnableListen_IT 16 static +stm32f0xx_hal_i2c.c:4238:19:HAL_I2C_DisableListen_IT 24 static +stm32f0xx_hal_i2c.c:4271:19:HAL_I2C_Master_Abort_IT 24 static +stm32f0xx_hal_i2c.c:4333:6:HAL_I2C_EV_IRQHandler 24 static +stm32f0xx_hal_i2c.c:4352:6:HAL_I2C_ER_IRQHandler 32 static +stm32f0xx_hal_i2c.c:4401:13:HAL_I2C_MasterTxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4417:13:HAL_I2C_MasterRxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4432:13:HAL_I2C_SlaveTxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4448:13:HAL_I2C_SlaveRxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4466:13:HAL_I2C_AddrCallback 16 static +stm32f0xx_hal_i2c.c:4484:13:HAL_I2C_ListenCpltCallback 16 static +stm32f0xx_hal_i2c.c:4500:13:HAL_I2C_MemTxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4516:13:HAL_I2C_MemRxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4532:13:HAL_I2C_ErrorCallback 16 static +stm32f0xx_hal_i2c.c:4548:13:HAL_I2C_AbortCpltCallback 16 static +stm32f0xx_hal_i2c.c:4583:22:HAL_I2C_GetState 16 static +stm32f0xx_hal_i2c.c:4595:21:HAL_I2C_GetMode 16 static +stm32f0xx_hal_i2c.c:4606:10:HAL_I2C_GetError 16 static +stm32f0xx_hal_i2c.c:4631:26:I2C_Master_ISR_IT 48 static +stm32f0xx_hal_i2c.c:4768:26:I2C_Slave_ISR_IT 32 static +stm32f0xx_hal_i2c.c:4903:26:I2C_Master_ISR_DMA 48 static +stm32f0xx_hal_i2c.c:5038:26:I2C_Slave_ISR_DMA 40 static +stm32f0xx_hal_i2c.c:5178:26:I2C_RequestMemoryWrite 40 static +stm32f0xx_hal_i2c.c:5232:26:I2C_RequestMemoryRead 40 static +stm32f0xx_hal_i2c.c:5280:13:I2C_ITAddrCplt 32 static +stm32f0xx_hal_i2c.c:5375:13:I2C_ITMasterSeqCplt 16 static +stm32f0xx_hal_i2c.c:5428:13:I2C_ITSlaveSeqCplt 24 static +stm32f0xx_hal_i2c.c:5502:13:I2C_ITMasterCplt 32 static +stm32f0xx_hal_i2c.c:5645:13:I2C_ITSlaveCplt 32 static +stm32f0xx_hal_i2c.c:5804:13:I2C_ITListenCplt 16 static +stm32f0xx_hal_i2c.c:5855:13:I2C_ITError 24 static +stm32f0xx_hal_i2c.c:5967:13:I2C_TreatErrorCallback 16 static +stm32f0xx_hal_i2c.c:6005:13:I2C_Flush_TXDR 16 static +stm32f0xx_hal_i2c.c:6026:13:I2C_DMAMasterTransmitCplt 24 static +stm32f0xx_hal_i2c.c:6074:13:I2C_DMASlaveTransmitCplt 24 static +stm32f0xx_hal_i2c.c:6101:13:I2C_DMAMasterReceiveCplt 24 static +stm32f0xx_hal_i2c.c:6149:13:I2C_DMASlaveReceiveCplt 24 static +stm32f0xx_hal_i2c.c:6176:13:I2C_DMAError 24 static +stm32f0xx_hal_i2c.c:6193:13:I2C_DMAAbort 24 static +stm32f0xx_hal_i2c.c:6220:26:I2C_WaitOnFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6251:26:I2C_WaitOnTXISFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6288:26:I2C_WaitOnSTOPFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6322:26:I2C_WaitOnRXNEFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6385:26:I2C_IsAcknowledgeFailed 24 static +stm32f0xx_hal_i2c.c:6453:13:I2C_TransferConfig 32 static +stm32f0xx_hal_i2c.c:6476:13:I2C_Enable_IRQ 24 static +stm32f0xx_hal_i2c.c:6547:13:I2C_Disable_IRQ 24 static +stm32f0xx_hal_i2c.c:6610:13:I2C_ConvertOtherXferOptions 16 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d new file mode 100644 index 0000000..9737ab8 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o new file mode 100644 index 0000000..bdd6584 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su new file mode 100644 index 0000000..19b976d --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su @@ -0,0 +1,4 @@ +stm32f0xx_hal_i2c_ex.c:97:19:HAL_I2CEx_ConfigAnalogFilter 16 static +stm32f0xx_hal_i2c_ex.c:141:19:HAL_I2CEx_ConfigDigitalFilter 24 static +stm32f0xx_hal_i2c_ex.c:279:6:HAL_I2CEx_EnableFastModePlus 24 static +stm32f0xx_hal_i2c_ex.c:304:6:HAL_I2CEx_DisableFastModePlus 24 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d new file mode 100644 index 0000000..c8e0cad --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o new file mode 100644 index 0000000..63a9094 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su new file mode 100644 index 0000000..6bc0263 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su @@ -0,0 +1,12 @@ +stm32f0xx_hal_pwr.c:75:6:HAL_PWR_DeInit 8 static +stm32f0xx_hal_pwr.c:88:6:HAL_PWR_EnableBkUpAccess 8 static +stm32f0xx_hal_pwr.c:100:6:HAL_PWR_DisableBkUpAccess 8 static +stm32f0xx_hal_pwr.c:231:6:HAL_PWR_EnableWakeUpPin 16 static +stm32f0xx_hal_pwr.c:246:6:HAL_PWR_DisableWakeUpPin 16 static +stm32f0xx_hal_pwr.c:269:6:HAL_PWR_EnterSLEEPMode 16 static,ignoring_inline_asm +stm32f0xx_hal_pwr.c:312:6:HAL_PWR_EnterSTOPMode 24 static,ignoring_inline_asm +stm32f0xx_hal_pwr.c:367:6:HAL_PWR_EnterSTANDBYMode 8 static,ignoring_inline_asm +stm32f0xx_hal_pwr.c:391:6:HAL_PWR_EnableSleepOnExit 8 static +stm32f0xx_hal_pwr.c:404:6:HAL_PWR_DisableSleepOnExit 8 static +stm32f0xx_hal_pwr.c:418:6:HAL_PWR_EnableSEVOnPend 8 static +stm32f0xx_hal_pwr.c:431:6:HAL_PWR_DisableSEVOnPend 8 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d new file mode 100644 index 0000000..1f7f41d --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o new file mode 100644 index 0000000..9964815 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.su new file mode 100644 index 0000000..e69de29 diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d new file mode 100644 index 0000000..a7478f5 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o new file mode 100644 index 0000000..42f30da Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su new file mode 100644 index 0000000..b42db45 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su @@ -0,0 +1,13 @@ +stm32f0xx_hal_rcc.c:210:19:HAL_RCC_DeInit 16 static +stm32f0xx_hal_rcc.c:300:19:HAL_RCC_OscConfig 40 static +stm32f0xx_hal_rcc.c:779:19:HAL_RCC_ClockConfig 24 static +stm32f0xx_hal_rcc.c:1018:6:HAL_RCC_MCOConfig 48 static +stm32f0xx_hal_rcc.c:1052:6:HAL_RCC_EnableCSS 8 static +stm32f0xx_hal_rcc.c:1061:6:HAL_RCC_DisableCSS 8 static +stm32f0xx_hal_rcc.c:1097:10:HAL_RCC_GetSysClockFreq 72 static +stm32f0xx_hal_rcc.c:1172:10:HAL_RCC_GetHCLKFreq 8 static +stm32f0xx_hal_rcc.c:1183:10:HAL_RCC_GetPCLK1Freq 8 static +stm32f0xx_hal_rcc.c:1196:6:HAL_RCC_GetOscConfig 16 static +stm32f0xx_hal_rcc.c:1298:6:HAL_RCC_GetClockConfig 16 static +stm32f0xx_hal_rcc.c:1324:6:HAL_RCC_NMI_IRQHandler 8 static +stm32f0xx_hal_rcc.c:1341:13:HAL_RCC_CSSCallback 8 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d new file mode 100644 index 0000000..b2234db --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o new file mode 100644 index 0000000..ccbd34f Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su new file mode 100644 index 0000000..e199abe --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su @@ -0,0 +1,3 @@ +stm32f0xx_hal_rcc_ex.c:104:19:HAL_RCCEx_PeriphCLKConfig 32 static +stm32f0xx_hal_rcc_ex.c:270:6:HAL_RCCEx_GetPeriphCLKConfig 16 static +stm32f0xx_hal_rcc_ex.c:370:10:HAL_RCCEx_GetPeriphCLKFreq 24 static diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d new file mode 100644 index 0000000..2949cd6 --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o new file mode 100644 index 0000000..eeebcb9 Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.su new file mode 100644 index 0000000..e69de29 diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d new file mode 100644 index 0000000..2ccb2ad --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o new file mode 100644 index 0000000..f0bad1a Binary files /dev/null and b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o differ diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.su b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.su new file mode 100644 index 0000000..e69de29 diff --git a/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk new file mode 100644 index 0000000..4195f3e --- /dev/null +++ b/LED/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk @@ -0,0 +1,89 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c + +C_DEPS += \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d + +OBJS += \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + + +# Each subdirectory must supply rules for building sources it contributes +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/LED/Debug/LED.bin b/LED/Debug/LED.bin new file mode 100755 index 0000000..7490249 Binary files /dev/null and b/LED/Debug/LED.bin differ diff --git a/LED/Debug/LED.elf b/LED/Debug/LED.elf new file mode 100755 index 0000000..526dca8 Binary files /dev/null and b/LED/Debug/LED.elf differ diff --git a/LED/Debug/LED.list b/LED/Debug/LED.list new file mode 100644 index 0000000..57c66e8 --- /dev/null +++ b/LED/Debug/LED.list @@ -0,0 +1,3591 @@ + +LED.elf: file format elf32-littlearm + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .isr_vector 000000c0 08000000 08000000 00010000 2**0 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 1 .text 000012fc 080000c0 080000c0 000100c0 2**2 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 2 .rodata 00000030 080013bc 080013bc 000113bc 2**2 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 3 .ARM.extab 00000000 080013ec 080013ec 0002000c 2**0 + CONTENTS + 4 .ARM 00000000 080013ec 080013ec 0002000c 2**0 + CONTENTS + 5 .preinit_array 00000000 080013ec 080013ec 0002000c 2**0 + CONTENTS, ALLOC, LOAD, DATA + 6 .init_array 00000004 080013ec 080013ec 000113ec 2**2 + CONTENTS, ALLOC, LOAD, DATA + 7 .fini_array 00000004 080013f0 080013f0 000113f0 2**2 + CONTENTS, ALLOC, LOAD, DATA + 8 .data 0000000c 20000000 080013f4 00020000 2**2 + CONTENTS, ALLOC, LOAD, DATA + 9 .bss 00000020 2000000c 08001400 0002000c 2**2 + ALLOC + 10 ._user_heap_stack 00000604 2000002c 08001400 0002002c 2**0 + ALLOC + 11 .ARM.attributes 00000028 00000000 00000000 0002000c 2**0 + CONTENTS, READONLY + 12 .debug_info 00002838 00000000 00000000 00020034 2**0 + CONTENTS, READONLY, DEBUGGING + 13 .debug_abbrev 00000ce0 00000000 00000000 0002286c 2**0 + CONTENTS, READONLY, DEBUGGING + 14 .debug_aranges 00000350 00000000 00000000 00023550 2**3 + CONTENTS, READONLY, DEBUGGING + 15 .debug_ranges 000002c8 00000000 00000000 000238a0 2**3 + CONTENTS, READONLY, DEBUGGING + 16 .debug_macro 0000ddc1 00000000 00000000 00023b68 2**0 + CONTENTS, READONLY, DEBUGGING + 17 .debug_line 00003b83 00000000 00000000 00031929 2**0 + CONTENTS, READONLY, DEBUGGING + 18 .debug_str 00052cf2 00000000 00000000 000354ac 2**0 + CONTENTS, READONLY, DEBUGGING + 19 .comment 0000007b 00000000 00000000 0008819e 2**0 + CONTENTS, READONLY + 20 .debug_frame 000009f8 00000000 00000000 0008821c 2**2 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +080000c0 <__do_global_dtors_aux>: + 80000c0: b510 push {r4, lr} + 80000c2: 4c06 ldr r4, [pc, #24] ; (80000dc <__do_global_dtors_aux+0x1c>) + 80000c4: 7823 ldrb r3, [r4, #0] + 80000c6: 2b00 cmp r3, #0 + 80000c8: d107 bne.n 80000da <__do_global_dtors_aux+0x1a> + 80000ca: 4b05 ldr r3, [pc, #20] ; (80000e0 <__do_global_dtors_aux+0x20>) + 80000cc: 2b00 cmp r3, #0 + 80000ce: d002 beq.n 80000d6 <__do_global_dtors_aux+0x16> + 80000d0: 4804 ldr r0, [pc, #16] ; (80000e4 <__do_global_dtors_aux+0x24>) + 80000d2: e000 b.n 80000d6 <__do_global_dtors_aux+0x16> + 80000d4: bf00 nop + 80000d6: 2301 movs r3, #1 + 80000d8: 7023 strb r3, [r4, #0] + 80000da: bd10 pop {r4, pc} + 80000dc: 2000000c .word 0x2000000c + 80000e0: 00000000 .word 0x00000000 + 80000e4: 080013a4 .word 0x080013a4 + +080000e8 : + 80000e8: 4b04 ldr r3, [pc, #16] ; (80000fc ) + 80000ea: b510 push {r4, lr} + 80000ec: 2b00 cmp r3, #0 + 80000ee: d003 beq.n 80000f8 + 80000f0: 4903 ldr r1, [pc, #12] ; (8000100 ) + 80000f2: 4804 ldr r0, [pc, #16] ; (8000104 ) + 80000f4: e000 b.n 80000f8 + 80000f6: bf00 nop + 80000f8: bd10 pop {r4, pc} + 80000fa: 46c0 nop ; (mov r8, r8) + 80000fc: 00000000 .word 0x00000000 + 8000100: 20000010 .word 0x20000010 + 8000104: 080013a4 .word 0x080013a4 + +08000108 <__udivsi3>: + 8000108: 2200 movs r2, #0 + 800010a: 0843 lsrs r3, r0, #1 + 800010c: 428b cmp r3, r1 + 800010e: d374 bcc.n 80001fa <__udivsi3+0xf2> + 8000110: 0903 lsrs r3, r0, #4 + 8000112: 428b cmp r3, r1 + 8000114: d35f bcc.n 80001d6 <__udivsi3+0xce> + 8000116: 0a03 lsrs r3, r0, #8 + 8000118: 428b cmp r3, r1 + 800011a: d344 bcc.n 80001a6 <__udivsi3+0x9e> + 800011c: 0b03 lsrs r3, r0, #12 + 800011e: 428b cmp r3, r1 + 8000120: d328 bcc.n 8000174 <__udivsi3+0x6c> + 8000122: 0c03 lsrs r3, r0, #16 + 8000124: 428b cmp r3, r1 + 8000126: d30d bcc.n 8000144 <__udivsi3+0x3c> + 8000128: 22ff movs r2, #255 ; 0xff + 800012a: 0209 lsls r1, r1, #8 + 800012c: ba12 rev r2, r2 + 800012e: 0c03 lsrs r3, r0, #16 + 8000130: 428b cmp r3, r1 + 8000132: d302 bcc.n 800013a <__udivsi3+0x32> + 8000134: 1212 asrs r2, r2, #8 + 8000136: 0209 lsls r1, r1, #8 + 8000138: d065 beq.n 8000206 <__udivsi3+0xfe> + 800013a: 0b03 lsrs r3, r0, #12 + 800013c: 428b cmp r3, r1 + 800013e: d319 bcc.n 8000174 <__udivsi3+0x6c> + 8000140: e000 b.n 8000144 <__udivsi3+0x3c> + 8000142: 0a09 lsrs r1, r1, #8 + 8000144: 0bc3 lsrs r3, r0, #15 + 8000146: 428b cmp r3, r1 + 8000148: d301 bcc.n 800014e <__udivsi3+0x46> + 800014a: 03cb lsls r3, r1, #15 + 800014c: 1ac0 subs r0, r0, r3 + 800014e: 4152 adcs r2, r2 + 8000150: 0b83 lsrs r3, r0, #14 + 8000152: 428b cmp r3, r1 + 8000154: d301 bcc.n 800015a <__udivsi3+0x52> + 8000156: 038b lsls r3, r1, #14 + 8000158: 1ac0 subs r0, r0, r3 + 800015a: 4152 adcs r2, r2 + 800015c: 0b43 lsrs r3, r0, #13 + 800015e: 428b cmp r3, r1 + 8000160: d301 bcc.n 8000166 <__udivsi3+0x5e> + 8000162: 034b lsls r3, r1, #13 + 8000164: 1ac0 subs r0, r0, r3 + 8000166: 4152 adcs r2, r2 + 8000168: 0b03 lsrs r3, r0, #12 + 800016a: 428b cmp r3, r1 + 800016c: d301 bcc.n 8000172 <__udivsi3+0x6a> + 800016e: 030b lsls r3, r1, #12 + 8000170: 1ac0 subs r0, r0, r3 + 8000172: 4152 adcs r2, r2 + 8000174: 0ac3 lsrs r3, r0, #11 + 8000176: 428b cmp r3, r1 + 8000178: d301 bcc.n 800017e <__udivsi3+0x76> + 800017a: 02cb lsls r3, r1, #11 + 800017c: 1ac0 subs r0, r0, r3 + 800017e: 4152 adcs r2, r2 + 8000180: 0a83 lsrs r3, r0, #10 + 8000182: 428b cmp r3, r1 + 8000184: d301 bcc.n 800018a <__udivsi3+0x82> + 8000186: 028b lsls r3, r1, #10 + 8000188: 1ac0 subs r0, r0, r3 + 800018a: 4152 adcs r2, r2 + 800018c: 0a43 lsrs r3, r0, #9 + 800018e: 428b cmp r3, r1 + 8000190: d301 bcc.n 8000196 <__udivsi3+0x8e> + 8000192: 024b lsls r3, r1, #9 + 8000194: 1ac0 subs r0, r0, r3 + 8000196: 4152 adcs r2, r2 + 8000198: 0a03 lsrs r3, r0, #8 + 800019a: 428b cmp r3, r1 + 800019c: d301 bcc.n 80001a2 <__udivsi3+0x9a> + 800019e: 020b lsls r3, r1, #8 + 80001a0: 1ac0 subs r0, r0, r3 + 80001a2: 4152 adcs r2, r2 + 80001a4: d2cd bcs.n 8000142 <__udivsi3+0x3a> + 80001a6: 09c3 lsrs r3, r0, #7 + 80001a8: 428b cmp r3, r1 + 80001aa: d301 bcc.n 80001b0 <__udivsi3+0xa8> + 80001ac: 01cb lsls r3, r1, #7 + 80001ae: 1ac0 subs r0, r0, r3 + 80001b0: 4152 adcs r2, r2 + 80001b2: 0983 lsrs r3, r0, #6 + 80001b4: 428b cmp r3, r1 + 80001b6: d301 bcc.n 80001bc <__udivsi3+0xb4> + 80001b8: 018b lsls r3, r1, #6 + 80001ba: 1ac0 subs r0, r0, r3 + 80001bc: 4152 adcs r2, r2 + 80001be: 0943 lsrs r3, r0, #5 + 80001c0: 428b cmp r3, r1 + 80001c2: d301 bcc.n 80001c8 <__udivsi3+0xc0> + 80001c4: 014b lsls r3, r1, #5 + 80001c6: 1ac0 subs r0, r0, r3 + 80001c8: 4152 adcs r2, r2 + 80001ca: 0903 lsrs r3, r0, #4 + 80001cc: 428b cmp r3, r1 + 80001ce: d301 bcc.n 80001d4 <__udivsi3+0xcc> + 80001d0: 010b lsls r3, r1, #4 + 80001d2: 1ac0 subs r0, r0, r3 + 80001d4: 4152 adcs r2, r2 + 80001d6: 08c3 lsrs r3, r0, #3 + 80001d8: 428b cmp r3, r1 + 80001da: d301 bcc.n 80001e0 <__udivsi3+0xd8> + 80001dc: 00cb lsls r3, r1, #3 + 80001de: 1ac0 subs r0, r0, r3 + 80001e0: 4152 adcs r2, r2 + 80001e2: 0883 lsrs r3, r0, #2 + 80001e4: 428b cmp r3, r1 + 80001e6: d301 bcc.n 80001ec <__udivsi3+0xe4> + 80001e8: 008b lsls r3, r1, #2 + 80001ea: 1ac0 subs r0, r0, r3 + 80001ec: 4152 adcs r2, r2 + 80001ee: 0843 lsrs r3, r0, #1 + 80001f0: 428b cmp r3, r1 + 80001f2: d301 bcc.n 80001f8 <__udivsi3+0xf0> + 80001f4: 004b lsls r3, r1, #1 + 80001f6: 1ac0 subs r0, r0, r3 + 80001f8: 4152 adcs r2, r2 + 80001fa: 1a41 subs r1, r0, r1 + 80001fc: d200 bcs.n 8000200 <__udivsi3+0xf8> + 80001fe: 4601 mov r1, r0 + 8000200: 4152 adcs r2, r2 + 8000202: 4610 mov r0, r2 + 8000204: 4770 bx lr + 8000206: e7ff b.n 8000208 <__udivsi3+0x100> + 8000208: b501 push {r0, lr} + 800020a: 2000 movs r0, #0 + 800020c: f000 f806 bl 800021c <__aeabi_idiv0> + 8000210: bd02 pop {r1, pc} + 8000212: 46c0 nop ; (mov r8, r8) + +08000214 <__aeabi_uidivmod>: + 8000214: 2900 cmp r1, #0 + 8000216: d0f7 beq.n 8000208 <__udivsi3+0x100> + 8000218: e776 b.n 8000108 <__udivsi3> + 800021a: 4770 bx lr + +0800021c <__aeabi_idiv0>: + 800021c: 4770 bx lr + 800021e: 46c0 nop ; (mov r8, r8) + +08000220
: +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + 8000220: b580 push {r7, lr} + 8000222: af00 add r7, sp, #0 + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + 8000224: f000 f960 bl 80004e8 + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + 8000228: f000 f816 bl 8000258 + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + 800022c: f000 f854 bl 80002d8 + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_6)); + 8000230: 2390 movs r3, #144 ; 0x90 + 8000232: 05db lsls r3, r3, #23 + 8000234: 2140 movs r1, #64 ; 0x40 + 8000236: 0018 movs r0, r3 + 8000238: f000 fc00 bl 8000a3c + 800023c: 0003 movs r3, r0 + 800023e: 001a movs r2, r3 + 8000240: 2390 movs r3, #144 ; 0x90 + 8000242: 05db lsls r3, r3, #23 + 8000244: 2104 movs r1, #4 + 8000246: 0018 movs r0, r3 + 8000248: f000 fc15 bl 8000a76 + HAL_Delay(1000); + 800024c: 23fa movs r3, #250 ; 0xfa + 800024e: 009b lsls r3, r3, #2 + 8000250: 0018 movs r0, r3 + 8000252: f000 f9ad bl 80005b0 + HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_6)); + 8000256: e7eb b.n 8000230 + +08000258 : +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + 8000258: b590 push {r4, r7, lr} + 800025a: b091 sub sp, #68 ; 0x44 + 800025c: af00 add r7, sp, #0 + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + 800025e: 2410 movs r4, #16 + 8000260: 193b adds r3, r7, r4 + 8000262: 0018 movs r0, r3 + 8000264: 2330 movs r3, #48 ; 0x30 + 8000266: 001a movs r2, r3 + 8000268: 2100 movs r1, #0 + 800026a: f001 f893 bl 8001394 + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + 800026e: 003b movs r3, r7 + 8000270: 0018 movs r0, r3 + 8000272: 2310 movs r3, #16 + 8000274: 001a movs r2, r3 + 8000276: 2100 movs r1, #0 + 8000278: f001 f88c bl 8001394 + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + 800027c: 0021 movs r1, r4 + 800027e: 187b adds r3, r7, r1 + 8000280: 2202 movs r2, #2 + 8000282: 601a str r2, [r3, #0] + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + 8000284: 187b adds r3, r7, r1 + 8000286: 2201 movs r2, #1 + 8000288: 60da str r2, [r3, #12] + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + 800028a: 187b adds r3, r7, r1 + 800028c: 2210 movs r2, #16 + 800028e: 611a str r2, [r3, #16] + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + 8000290: 187b adds r3, r7, r1 + 8000292: 2200 movs r2, #0 + 8000294: 621a str r2, [r3, #32] + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + 8000296: 187b adds r3, r7, r1 + 8000298: 0018 movs r0, r3 + 800029a: f000 fc09 bl 8000ab0 + 800029e: 1e03 subs r3, r0, #0 + 80002a0: d001 beq.n 80002a6 + { + Error_Handler(); + 80002a2: f000 f8b3 bl 800040c + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + 80002a6: 003b movs r3, r7 + 80002a8: 2207 movs r2, #7 + 80002aa: 601a str r2, [r3, #0] + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + 80002ac: 003b movs r3, r7 + 80002ae: 2200 movs r2, #0 + 80002b0: 605a str r2, [r3, #4] + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + 80002b2: 003b movs r3, r7 + 80002b4: 2200 movs r2, #0 + 80002b6: 609a str r2, [r3, #8] + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + 80002b8: 003b movs r3, r7 + 80002ba: 2200 movs r2, #0 + 80002bc: 60da str r2, [r3, #12] + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + 80002be: 003b movs r3, r7 + 80002c0: 2100 movs r1, #0 + 80002c2: 0018 movs r0, r3 + 80002c4: f000 ff10 bl 80010e8 + 80002c8: 1e03 subs r3, r0, #0 + 80002ca: d001 beq.n 80002d0 + { + Error_Handler(); + 80002cc: f000 f89e bl 800040c + } +} + 80002d0: 46c0 nop ; (mov r8, r8) + 80002d2: 46bd mov sp, r7 + 80002d4: b011 add sp, #68 ; 0x44 + 80002d6: bd90 pop {r4, r7, pc} + +080002d8 : + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + 80002d8: b590 push {r4, r7, lr} + 80002da: b089 sub sp, #36 ; 0x24 + 80002dc: af00 add r7, sp, #0 + GPIO_InitTypeDef GPIO_InitStruct = {0}; + 80002de: 240c movs r4, #12 + 80002e0: 193b adds r3, r7, r4 + 80002e2: 0018 movs r0, r3 + 80002e4: 2314 movs r3, #20 + 80002e6: 001a movs r2, r3 + 80002e8: 2100 movs r1, #0 + 80002ea: f001 f853 bl 8001394 + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOF_CLK_ENABLE(); + 80002ee: 4b45 ldr r3, [pc, #276] ; (8000404 ) + 80002f0: 695a ldr r2, [r3, #20] + 80002f2: 4b44 ldr r3, [pc, #272] ; (8000404 ) + 80002f4: 2180 movs r1, #128 ; 0x80 + 80002f6: 03c9 lsls r1, r1, #15 + 80002f8: 430a orrs r2, r1 + 80002fa: 615a str r2, [r3, #20] + 80002fc: 4b41 ldr r3, [pc, #260] ; (8000404 ) + 80002fe: 695a ldr r2, [r3, #20] + 8000300: 2380 movs r3, #128 ; 0x80 + 8000302: 03db lsls r3, r3, #15 + 8000304: 4013 ands r3, r2 + 8000306: 60bb str r3, [r7, #8] + 8000308: 68bb ldr r3, [r7, #8] + __HAL_RCC_GPIOA_CLK_ENABLE(); + 800030a: 4b3e ldr r3, [pc, #248] ; (8000404 ) + 800030c: 695a ldr r2, [r3, #20] + 800030e: 4b3d ldr r3, [pc, #244] ; (8000404 ) + 8000310: 2180 movs r1, #128 ; 0x80 + 8000312: 0289 lsls r1, r1, #10 + 8000314: 430a orrs r2, r1 + 8000316: 615a str r2, [r3, #20] + 8000318: 4b3a ldr r3, [pc, #232] ; (8000404 ) + 800031a: 695a ldr r2, [r3, #20] + 800031c: 2380 movs r3, #128 ; 0x80 + 800031e: 029b lsls r3, r3, #10 + 8000320: 4013 ands r3, r2 + 8000322: 607b str r3, [r7, #4] + 8000324: 687b ldr r3, [r7, #4] + __HAL_RCC_GPIOB_CLK_ENABLE(); + 8000326: 4b37 ldr r3, [pc, #220] ; (8000404 ) + 8000328: 695a ldr r2, [r3, #20] + 800032a: 4b36 ldr r3, [pc, #216] ; (8000404 ) + 800032c: 2180 movs r1, #128 ; 0x80 + 800032e: 02c9 lsls r1, r1, #11 + 8000330: 430a orrs r2, r1 + 8000332: 615a str r2, [r3, #20] + 8000334: 4b33 ldr r3, [pc, #204] ; (8000404 ) + 8000336: 695a ldr r2, [r3, #20] + 8000338: 2380 movs r3, #128 ; 0x80 + 800033a: 02db lsls r3, r3, #11 + 800033c: 4013 ands r3, r2 + 800033e: 603b str r3, [r7, #0] + 8000340: 683b ldr r3, [r7, #0] + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOA, LED_Pin|TEN_Pin|Relay1_Pin, GPIO_PIN_RESET); + 8000342: 2390 movs r3, #144 ; 0x90 + 8000344: 05db lsls r3, r3, #23 + 8000346: 2200 movs r2, #0 + 8000348: 21a4 movs r1, #164 ; 0xa4 + 800034a: 0018 movs r0, r3 + 800034c: f000 fb93 bl 8000a76 + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, GPIO_PIN_RESET); + 8000350: 4b2d ldr r3, [pc, #180] ; (8000408 ) + 8000352: 2200 movs r2, #0 + 8000354: 2102 movs r1, #2 + 8000356: 0018 movs r0, r3 + 8000358: f000 fb8d bl 8000a76 + + /*Configure GPIO pins : IN1_Pin IN2_Pin Button_Pin */ + GPIO_InitStruct.Pin = IN1_Pin|IN2_Pin|Button_Pin; + 800035c: 193b adds r3, r7, r4 + 800035e: 2243 movs r2, #67 ; 0x43 + 8000360: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + 8000362: 193b adds r3, r7, r4 + 8000364: 2200 movs r2, #0 + 8000366: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_PULLUP; + 8000368: 193b adds r3, r7, r4 + 800036a: 2201 movs r2, #1 + 800036c: 609a str r2, [r3, #8] + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 800036e: 193a adds r2, r7, r4 + 8000370: 2390 movs r3, #144 ; 0x90 + 8000372: 05db lsls r3, r3, #23 + 8000374: 0011 movs r1, r2 + 8000376: 0018 movs r0, r3 + 8000378: f000 f9f0 bl 800075c + + /*Configure GPIO pins : LED_Pin TEN_Pin Relay1_Pin */ + GPIO_InitStruct.Pin = LED_Pin|TEN_Pin|Relay1_Pin; + 800037c: 193b adds r3, r7, r4 + 800037e: 22a4 movs r2, #164 ; 0xa4 + 8000380: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 8000382: 193b adds r3, r7, r4 + 8000384: 2201 movs r2, #1 + 8000386: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 8000388: 193b adds r3, r7, r4 + 800038a: 2200 movs r2, #0 + 800038c: 609a str r2, [r3, #8] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + 800038e: 193b adds r3, r7, r4 + 8000390: 2203 movs r2, #3 + 8000392: 60da str r2, [r3, #12] + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 8000394: 193a adds r2, r7, r4 + 8000396: 2390 movs r3, #144 ; 0x90 + 8000398: 05db lsls r3, r3, #23 + 800039a: 0011 movs r1, r2 + 800039c: 0018 movs r0, r3 + 800039e: f000 f9dd bl 800075c + + /*Configure GPIO pin : Relay2_Pin */ + GPIO_InitStruct.Pin = Relay2_Pin; + 80003a2: 0021 movs r1, r4 + 80003a4: 187b adds r3, r7, r1 + 80003a6: 2202 movs r2, #2 + 80003a8: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 80003aa: 187b adds r3, r7, r1 + 80003ac: 2201 movs r2, #1 + 80003ae: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 80003b0: 187b adds r3, r7, r1 + 80003b2: 2200 movs r2, #0 + 80003b4: 609a str r2, [r3, #8] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + 80003b6: 187b adds r3, r7, r1 + 80003b8: 2203 movs r2, #3 + 80003ba: 60da str r2, [r3, #12] + HAL_GPIO_Init(Relay2_GPIO_Port, &GPIO_InitStruct); + 80003bc: 000c movs r4, r1 + 80003be: 187b adds r3, r7, r1 + 80003c0: 4a11 ldr r2, [pc, #68] ; (8000408 ) + 80003c2: 0019 movs r1, r3 + 80003c4: 0010 movs r0, r2 + 80003c6: f000 f9c9 bl 800075c + + /*Configure GPIO pins : PA9 PA10 */ + GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10; + 80003ca: 0021 movs r1, r4 + 80003cc: 187b adds r3, r7, r1 + 80003ce: 22c0 movs r2, #192 ; 0xc0 + 80003d0: 00d2 lsls r2, r2, #3 + 80003d2: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + 80003d4: 187b adds r3, r7, r1 + 80003d6: 2202 movs r2, #2 + 80003d8: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 80003da: 187b adds r3, r7, r1 + 80003dc: 2200 movs r2, #0 + 80003de: 609a str r2, [r3, #8] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + 80003e0: 187b adds r3, r7, r1 + 80003e2: 2203 movs r2, #3 + 80003e4: 60da str r2, [r3, #12] + GPIO_InitStruct.Alternate = GPIO_AF1_USART1; + 80003e6: 187b adds r3, r7, r1 + 80003e8: 2201 movs r2, #1 + 80003ea: 611a str r2, [r3, #16] + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 80003ec: 187a adds r2, r7, r1 + 80003ee: 2390 movs r3, #144 ; 0x90 + 80003f0: 05db lsls r3, r3, #23 + 80003f2: 0011 movs r1, r2 + 80003f4: 0018 movs r0, r3 + 80003f6: f000 f9b1 bl 800075c + +} + 80003fa: 46c0 nop ; (mov r8, r8) + 80003fc: 46bd mov sp, r7 + 80003fe: b009 add sp, #36 ; 0x24 + 8000400: bd90 pop {r4, r7, pc} + 8000402: 46c0 nop ; (mov r8, r8) + 8000404: 40021000 .word 0x40021000 + 8000408: 48000400 .word 0x48000400 + +0800040c : +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + 800040c: b580 push {r7, lr} + 800040e: af00 add r7, sp, #0 + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); + 8000410: b672 cpsid i + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + 8000412: e7fe b.n 8000412 + +08000414 : +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + 8000414: b580 push {r7, lr} + 8000416: b082 sub sp, #8 + 8000418: af00 add r7, sp, #0 + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + 800041a: 4b0f ldr r3, [pc, #60] ; (8000458 ) + 800041c: 699a ldr r2, [r3, #24] + 800041e: 4b0e ldr r3, [pc, #56] ; (8000458 ) + 8000420: 2101 movs r1, #1 + 8000422: 430a orrs r2, r1 + 8000424: 619a str r2, [r3, #24] + 8000426: 4b0c ldr r3, [pc, #48] ; (8000458 ) + 8000428: 699b ldr r3, [r3, #24] + 800042a: 2201 movs r2, #1 + 800042c: 4013 ands r3, r2 + 800042e: 607b str r3, [r7, #4] + 8000430: 687b ldr r3, [r7, #4] + __HAL_RCC_PWR_CLK_ENABLE(); + 8000432: 4b09 ldr r3, [pc, #36] ; (8000458 ) + 8000434: 69da ldr r2, [r3, #28] + 8000436: 4b08 ldr r3, [pc, #32] ; (8000458 ) + 8000438: 2180 movs r1, #128 ; 0x80 + 800043a: 0549 lsls r1, r1, #21 + 800043c: 430a orrs r2, r1 + 800043e: 61da str r2, [r3, #28] + 8000440: 4b05 ldr r3, [pc, #20] ; (8000458 ) + 8000442: 69da ldr r2, [r3, #28] + 8000444: 2380 movs r3, #128 ; 0x80 + 8000446: 055b lsls r3, r3, #21 + 8000448: 4013 ands r3, r2 + 800044a: 603b str r3, [r7, #0] + 800044c: 683b ldr r3, [r7, #0] + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + 800044e: 46c0 nop ; (mov r8, r8) + 8000450: 46bd mov sp, r7 + 8000452: b002 add sp, #8 + 8000454: bd80 pop {r7, pc} + 8000456: 46c0 nop ; (mov r8, r8) + 8000458: 40021000 .word 0x40021000 + +0800045c : +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + 800045c: b580 push {r7, lr} + 800045e: af00 add r7, sp, #0 + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + 8000460: e7fe b.n 8000460 + +08000462 : + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + 8000462: b580 push {r7, lr} + 8000464: af00 add r7, sp, #0 + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + 8000466: e7fe b.n 8000466 + +08000468 : + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + 8000468: b580 push {r7, lr} + 800046a: af00 add r7, sp, #0 + + /* USER CODE END SVC_IRQn 0 */ + /* USER CODE BEGIN SVC_IRQn 1 */ + + /* USER CODE END SVC_IRQn 1 */ +} + 800046c: 46c0 nop ; (mov r8, r8) + 800046e: 46bd mov sp, r7 + 8000470: bd80 pop {r7, pc} + +08000472 : + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + 8000472: b580 push {r7, lr} + 8000474: af00 add r7, sp, #0 + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + 8000476: 46c0 nop ; (mov r8, r8) + 8000478: 46bd mov sp, r7 + 800047a: bd80 pop {r7, pc} + +0800047c : + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + 800047c: b580 push {r7, lr} + 800047e: af00 add r7, sp, #0 + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + 8000480: f000 f87a bl 8000578 + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + 8000484: 46c0 nop ; (mov r8, r8) + 8000486: 46bd mov sp, r7 + 8000488: bd80 pop {r7, pc} + +0800048a : + * @brief Setup the microcontroller system + * @param None + * @retval None + */ +void SystemInit(void) +{ + 800048a: b580 push {r7, lr} + 800048c: af00 add r7, sp, #0 + before branch to main program. This call is made inside + the "startup_stm32f0xx.s" file. + User can setups the default system clock (System clock source, PLL Multiplier + and Divider factors, AHB/APBx prescalers and Flash settings). + */ +} + 800048e: 46c0 nop ; (mov r8, r8) + 8000490: 46bd mov sp, r7 + 8000492: bd80 pop {r7, pc} + +08000494 : + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + 8000494: 480d ldr r0, [pc, #52] ; (80004cc ) + mov sp, r0 /* set stack pointer */ + 8000496: 4685 mov sp, r0 + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + 8000498: 480d ldr r0, [pc, #52] ; (80004d0 ) + ldr r1, =_edata + 800049a: 490e ldr r1, [pc, #56] ; (80004d4 ) + ldr r2, =_sidata + 800049c: 4a0e ldr r2, [pc, #56] ; (80004d8 ) + movs r3, #0 + 800049e: 2300 movs r3, #0 + b LoopCopyDataInit + 80004a0: e002 b.n 80004a8 + +080004a2 : + +CopyDataInit: + ldr r4, [r2, r3] + 80004a2: 58d4 ldr r4, [r2, r3] + str r4, [r0, r3] + 80004a4: 50c4 str r4, [r0, r3] + adds r3, r3, #4 + 80004a6: 3304 adds r3, #4 + +080004a8 : + +LoopCopyDataInit: + adds r4, r0, r3 + 80004a8: 18c4 adds r4, r0, r3 + cmp r4, r1 + 80004aa: 428c cmp r4, r1 + bcc CopyDataInit + 80004ac: d3f9 bcc.n 80004a2 + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + 80004ae: 4a0b ldr r2, [pc, #44] ; (80004dc ) + ldr r4, =_ebss + 80004b0: 4c0b ldr r4, [pc, #44] ; (80004e0 ) + movs r3, #0 + 80004b2: 2300 movs r3, #0 + b LoopFillZerobss + 80004b4: e001 b.n 80004ba + +080004b6 : + +FillZerobss: + str r3, [r2] + 80004b6: 6013 str r3, [r2, #0] + adds r2, r2, #4 + 80004b8: 3204 adds r2, #4 + +080004ba : + +LoopFillZerobss: + cmp r2, r4 + 80004ba: 42a2 cmp r2, r4 + bcc FillZerobss + 80004bc: d3fb bcc.n 80004b6 + +/* Call the clock system intitialization function.*/ + bl SystemInit + 80004be: f7ff ffe4 bl 800048a +/* Call static constructors */ + bl __libc_init_array + 80004c2: f000 ff43 bl 800134c <__libc_init_array> +/* Call the application's entry point.*/ + bl main + 80004c6: f7ff feab bl 8000220
+ +080004ca : + +LoopForever: + b LoopForever + 80004ca: e7fe b.n 80004ca + ldr r0, =_estack + 80004cc: 20001000 .word 0x20001000 + ldr r0, =_sdata + 80004d0: 20000000 .word 0x20000000 + ldr r1, =_edata + 80004d4: 2000000c .word 0x2000000c + ldr r2, =_sidata + 80004d8: 080013f4 .word 0x080013f4 + ldr r2, =_sbss + 80004dc: 2000000c .word 0x2000000c + ldr r4, =_ebss + 80004e0: 2000002c .word 0x2000002c + +080004e4 : + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + 80004e4: e7fe b.n 80004e4 + ... + +080004e8 : + * In the default implementation,Systick is used as source of time base. + * The tick variable is incremented each 1ms in its ISR. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + 80004e8: b580 push {r7, lr} + 80004ea: af00 add r7, sp, #0 + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); + 80004ec: 4b07 ldr r3, [pc, #28] ; (800050c ) + 80004ee: 681a ldr r2, [r3, #0] + 80004f0: 4b06 ldr r3, [pc, #24] ; (800050c ) + 80004f2: 2110 movs r1, #16 + 80004f4: 430a orrs r2, r1 + 80004f6: 601a str r2, [r3, #0] +#endif /* PREFETCH_ENABLE */ + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + + HAL_InitTick(TICK_INT_PRIORITY); + 80004f8: 2000 movs r0, #0 + 80004fa: f000 f809 bl 8000510 + + /* Init the low level hardware */ + HAL_MspInit(); + 80004fe: f7ff ff89 bl 8000414 + + /* Return function status */ + return HAL_OK; + 8000502: 2300 movs r3, #0 +} + 8000504: 0018 movs r0, r3 + 8000506: 46bd mov sp, r7 + 8000508: bd80 pop {r7, pc} + 800050a: 46c0 nop ; (mov r8, r8) + 800050c: 40022000 .word 0x40022000 + +08000510 : + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + 8000510: b590 push {r4, r7, lr} + 8000512: b083 sub sp, #12 + 8000514: af00 add r7, sp, #0 + 8000516: 6078 str r0, [r7, #4] + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) + 8000518: 4b14 ldr r3, [pc, #80] ; (800056c ) + 800051a: 681c ldr r4, [r3, #0] + 800051c: 4b14 ldr r3, [pc, #80] ; (8000570 ) + 800051e: 781b ldrb r3, [r3, #0] + 8000520: 0019 movs r1, r3 + 8000522: 23fa movs r3, #250 ; 0xfa + 8000524: 0098 lsls r0, r3, #2 + 8000526: f7ff fdef bl 8000108 <__udivsi3> + 800052a: 0003 movs r3, r0 + 800052c: 0019 movs r1, r3 + 800052e: 0020 movs r0, r4 + 8000530: f7ff fdea bl 8000108 <__udivsi3> + 8000534: 0003 movs r3, r0 + 8000536: 0018 movs r0, r3 + 8000538: f000 f903 bl 8000742 + 800053c: 1e03 subs r3, r0, #0 + 800053e: d001 beq.n 8000544 + { + return HAL_ERROR; + 8000540: 2301 movs r3, #1 + 8000542: e00f b.n 8000564 + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + 8000544: 687b ldr r3, [r7, #4] + 8000546: 2b03 cmp r3, #3 + 8000548: d80b bhi.n 8000562 + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + 800054a: 6879 ldr r1, [r7, #4] + 800054c: 2301 movs r3, #1 + 800054e: 425b negs r3, r3 + 8000550: 2200 movs r2, #0 + 8000552: 0018 movs r0, r3 + 8000554: f000 f8e0 bl 8000718 + uwTickPrio = TickPriority; + 8000558: 4b06 ldr r3, [pc, #24] ; (8000574 ) + 800055a: 687a ldr r2, [r7, #4] + 800055c: 601a str r2, [r3, #0] + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; + 800055e: 2300 movs r3, #0 + 8000560: e000 b.n 8000564 + return HAL_ERROR; + 8000562: 2301 movs r3, #1 +} + 8000564: 0018 movs r0, r3 + 8000566: 46bd mov sp, r7 + 8000568: b003 add sp, #12 + 800056a: bd90 pop {r4, r7, pc} + 800056c: 20000000 .word 0x20000000 + 8000570: 20000008 .word 0x20000008 + 8000574: 20000004 .word 0x20000004 + +08000578 : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + 8000578: b580 push {r7, lr} + 800057a: af00 add r7, sp, #0 + uwTick += uwTickFreq; + 800057c: 4b05 ldr r3, [pc, #20] ; (8000594 ) + 800057e: 781b ldrb r3, [r3, #0] + 8000580: 001a movs r2, r3 + 8000582: 4b05 ldr r3, [pc, #20] ; (8000598 ) + 8000584: 681b ldr r3, [r3, #0] + 8000586: 18d2 adds r2, r2, r3 + 8000588: 4b03 ldr r3, [pc, #12] ; (8000598 ) + 800058a: 601a str r2, [r3, #0] +} + 800058c: 46c0 nop ; (mov r8, r8) + 800058e: 46bd mov sp, r7 + 8000590: bd80 pop {r7, pc} + 8000592: 46c0 nop ; (mov r8, r8) + 8000594: 20000008 .word 0x20000008 + 8000598: 20000028 .word 0x20000028 + +0800059c : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + 800059c: b580 push {r7, lr} + 800059e: af00 add r7, sp, #0 + return uwTick; + 80005a0: 4b02 ldr r3, [pc, #8] ; (80005ac ) + 80005a2: 681b ldr r3, [r3, #0] +} + 80005a4: 0018 movs r0, r3 + 80005a6: 46bd mov sp, r7 + 80005a8: bd80 pop {r7, pc} + 80005aa: 46c0 nop ; (mov r8, r8) + 80005ac: 20000028 .word 0x20000028 + +080005b0 : + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + 80005b0: b580 push {r7, lr} + 80005b2: b084 sub sp, #16 + 80005b4: af00 add r7, sp, #0 + 80005b6: 6078 str r0, [r7, #4] + uint32_t tickstart = HAL_GetTick(); + 80005b8: f7ff fff0 bl 800059c + 80005bc: 0003 movs r3, r0 + 80005be: 60bb str r3, [r7, #8] + uint32_t wait = Delay; + 80005c0: 687b ldr r3, [r7, #4] + 80005c2: 60fb str r3, [r7, #12] + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + 80005c4: 68fb ldr r3, [r7, #12] + 80005c6: 3301 adds r3, #1 + 80005c8: d005 beq.n 80005d6 + { + wait += (uint32_t)(uwTickFreq); + 80005ca: 4b09 ldr r3, [pc, #36] ; (80005f0 ) + 80005cc: 781b ldrb r3, [r3, #0] + 80005ce: 001a movs r2, r3 + 80005d0: 68fb ldr r3, [r7, #12] + 80005d2: 189b adds r3, r3, r2 + 80005d4: 60fb str r3, [r7, #12] + } + + while((HAL_GetTick() - tickstart) < wait) + 80005d6: 46c0 nop ; (mov r8, r8) + 80005d8: f7ff ffe0 bl 800059c + 80005dc: 0002 movs r2, r0 + 80005de: 68bb ldr r3, [r7, #8] + 80005e0: 1ad3 subs r3, r2, r3 + 80005e2: 68fa ldr r2, [r7, #12] + 80005e4: 429a cmp r2, r3 + 80005e6: d8f7 bhi.n 80005d8 + { + } +} + 80005e8: 46c0 nop ; (mov r8, r8) + 80005ea: 46bd mov sp, r7 + 80005ec: b004 add sp, #16 + 80005ee: bd80 pop {r7, pc} + 80005f0: 20000008 .word 0x20000008 + +080005f4 <__NVIC_SetPriority>: + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + 80005f4: b590 push {r4, r7, lr} + 80005f6: b083 sub sp, #12 + 80005f8: af00 add r7, sp, #0 + 80005fa: 0002 movs r2, r0 + 80005fc: 6039 str r1, [r7, #0] + 80005fe: 1dfb adds r3, r7, #7 + 8000600: 701a strb r2, [r3, #0] + if ((int32_t)(IRQn) >= 0) + 8000602: 1dfb adds r3, r7, #7 + 8000604: 781b ldrb r3, [r3, #0] + 8000606: 2b7f cmp r3, #127 ; 0x7f + 8000608: d828 bhi.n 800065c <__NVIC_SetPriority+0x68> + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 800060a: 4a2f ldr r2, [pc, #188] ; (80006c8 <__NVIC_SetPriority+0xd4>) + 800060c: 1dfb adds r3, r7, #7 + 800060e: 781b ldrb r3, [r3, #0] + 8000610: b25b sxtb r3, r3 + 8000612: 089b lsrs r3, r3, #2 + 8000614: 33c0 adds r3, #192 ; 0xc0 + 8000616: 009b lsls r3, r3, #2 + 8000618: 589b ldr r3, [r3, r2] + 800061a: 1dfa adds r2, r7, #7 + 800061c: 7812 ldrb r2, [r2, #0] + 800061e: 0011 movs r1, r2 + 8000620: 2203 movs r2, #3 + 8000622: 400a ands r2, r1 + 8000624: 00d2 lsls r2, r2, #3 + 8000626: 21ff movs r1, #255 ; 0xff + 8000628: 4091 lsls r1, r2 + 800062a: 000a movs r2, r1 + 800062c: 43d2 mvns r2, r2 + 800062e: 401a ands r2, r3 + 8000630: 0011 movs r1, r2 + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + 8000632: 683b ldr r3, [r7, #0] + 8000634: 019b lsls r3, r3, #6 + 8000636: 22ff movs r2, #255 ; 0xff + 8000638: 401a ands r2, r3 + 800063a: 1dfb adds r3, r7, #7 + 800063c: 781b ldrb r3, [r3, #0] + 800063e: 0018 movs r0, r3 + 8000640: 2303 movs r3, #3 + 8000642: 4003 ands r3, r0 + 8000644: 00db lsls r3, r3, #3 + 8000646: 409a lsls r2, r3 + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 8000648: 481f ldr r0, [pc, #124] ; (80006c8 <__NVIC_SetPriority+0xd4>) + 800064a: 1dfb adds r3, r7, #7 + 800064c: 781b ldrb r3, [r3, #0] + 800064e: b25b sxtb r3, r3 + 8000650: 089b lsrs r3, r3, #2 + 8000652: 430a orrs r2, r1 + 8000654: 33c0 adds r3, #192 ; 0xc0 + 8000656: 009b lsls r3, r3, #2 + 8000658: 501a str r2, [r3, r0] + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + 800065a: e031 b.n 80006c0 <__NVIC_SetPriority+0xcc> + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 800065c: 4a1b ldr r2, [pc, #108] ; (80006cc <__NVIC_SetPriority+0xd8>) + 800065e: 1dfb adds r3, r7, #7 + 8000660: 781b ldrb r3, [r3, #0] + 8000662: 0019 movs r1, r3 + 8000664: 230f movs r3, #15 + 8000666: 400b ands r3, r1 + 8000668: 3b08 subs r3, #8 + 800066a: 089b lsrs r3, r3, #2 + 800066c: 3306 adds r3, #6 + 800066e: 009b lsls r3, r3, #2 + 8000670: 18d3 adds r3, r2, r3 + 8000672: 3304 adds r3, #4 + 8000674: 681b ldr r3, [r3, #0] + 8000676: 1dfa adds r2, r7, #7 + 8000678: 7812 ldrb r2, [r2, #0] + 800067a: 0011 movs r1, r2 + 800067c: 2203 movs r2, #3 + 800067e: 400a ands r2, r1 + 8000680: 00d2 lsls r2, r2, #3 + 8000682: 21ff movs r1, #255 ; 0xff + 8000684: 4091 lsls r1, r2 + 8000686: 000a movs r2, r1 + 8000688: 43d2 mvns r2, r2 + 800068a: 401a ands r2, r3 + 800068c: 0011 movs r1, r2 + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + 800068e: 683b ldr r3, [r7, #0] + 8000690: 019b lsls r3, r3, #6 + 8000692: 22ff movs r2, #255 ; 0xff + 8000694: 401a ands r2, r3 + 8000696: 1dfb adds r3, r7, #7 + 8000698: 781b ldrb r3, [r3, #0] + 800069a: 0018 movs r0, r3 + 800069c: 2303 movs r3, #3 + 800069e: 4003 ands r3, r0 + 80006a0: 00db lsls r3, r3, #3 + 80006a2: 409a lsls r2, r3 + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 80006a4: 4809 ldr r0, [pc, #36] ; (80006cc <__NVIC_SetPriority+0xd8>) + 80006a6: 1dfb adds r3, r7, #7 + 80006a8: 781b ldrb r3, [r3, #0] + 80006aa: 001c movs r4, r3 + 80006ac: 230f movs r3, #15 + 80006ae: 4023 ands r3, r4 + 80006b0: 3b08 subs r3, #8 + 80006b2: 089b lsrs r3, r3, #2 + 80006b4: 430a orrs r2, r1 + 80006b6: 3306 adds r3, #6 + 80006b8: 009b lsls r3, r3, #2 + 80006ba: 18c3 adds r3, r0, r3 + 80006bc: 3304 adds r3, #4 + 80006be: 601a str r2, [r3, #0] +} + 80006c0: 46c0 nop ; (mov r8, r8) + 80006c2: 46bd mov sp, r7 + 80006c4: b003 add sp, #12 + 80006c6: bd90 pop {r4, r7, pc} + 80006c8: e000e100 .word 0xe000e100 + 80006cc: e000ed00 .word 0xe000ed00 + +080006d0 : + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + 80006d0: b580 push {r7, lr} + 80006d2: b082 sub sp, #8 + 80006d4: af00 add r7, sp, #0 + 80006d6: 6078 str r0, [r7, #4] + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + 80006d8: 687b ldr r3, [r7, #4] + 80006da: 3b01 subs r3, #1 + 80006dc: 4a0c ldr r2, [pc, #48] ; (8000710 ) + 80006de: 4293 cmp r3, r2 + 80006e0: d901 bls.n 80006e6 + { + return (1UL); /* Reload value impossible */ + 80006e2: 2301 movs r3, #1 + 80006e4: e010 b.n 8000708 + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + 80006e6: 4b0b ldr r3, [pc, #44] ; (8000714 ) + 80006e8: 687a ldr r2, [r7, #4] + 80006ea: 3a01 subs r2, #1 + 80006ec: 605a str r2, [r3, #4] + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + 80006ee: 2301 movs r3, #1 + 80006f0: 425b negs r3, r3 + 80006f2: 2103 movs r1, #3 + 80006f4: 0018 movs r0, r3 + 80006f6: f7ff ff7d bl 80005f4 <__NVIC_SetPriority> + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + 80006fa: 4b06 ldr r3, [pc, #24] ; (8000714 ) + 80006fc: 2200 movs r2, #0 + 80006fe: 609a str r2, [r3, #8] + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + 8000700: 4b04 ldr r3, [pc, #16] ; (8000714 ) + 8000702: 2207 movs r2, #7 + 8000704: 601a str r2, [r3, #0] + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ + 8000706: 2300 movs r3, #0 +} + 8000708: 0018 movs r0, r3 + 800070a: 46bd mov sp, r7 + 800070c: b002 add sp, #8 + 800070e: bd80 pop {r7, pc} + 8000710: 00ffffff .word 0x00ffffff + 8000714: e000e010 .word 0xe000e010 + +08000718 : + * with stm32f0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0 based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + 8000718: b580 push {r7, lr} + 800071a: b084 sub sp, #16 + 800071c: af00 add r7, sp, #0 + 800071e: 60b9 str r1, [r7, #8] + 8000720: 607a str r2, [r7, #4] + 8000722: 210f movs r1, #15 + 8000724: 187b adds r3, r7, r1 + 8000726: 1c02 adds r2, r0, #0 + 8000728: 701a strb r2, [r3, #0] + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn,PreemptPriority); + 800072a: 68ba ldr r2, [r7, #8] + 800072c: 187b adds r3, r7, r1 + 800072e: 781b ldrb r3, [r3, #0] + 8000730: b25b sxtb r3, r3 + 8000732: 0011 movs r1, r2 + 8000734: 0018 movs r0, r3 + 8000736: f7ff ff5d bl 80005f4 <__NVIC_SetPriority> +} + 800073a: 46c0 nop ; (mov r8, r8) + 800073c: 46bd mov sp, r7 + 800073e: b004 add sp, #16 + 8000740: bd80 pop {r7, pc} + +08000742 : + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + 8000742: b580 push {r7, lr} + 8000744: b082 sub sp, #8 + 8000746: af00 add r7, sp, #0 + 8000748: 6078 str r0, [r7, #4] + return SysTick_Config(TicksNumb); + 800074a: 687b ldr r3, [r7, #4] + 800074c: 0018 movs r0, r3 + 800074e: f7ff ffbf bl 80006d0 + 8000752: 0003 movs r3, r0 +} + 8000754: 0018 movs r0, r3 + 8000756: 46bd mov sp, r7 + 8000758: b002 add sp, #8 + 800075a: bd80 pop {r7, pc} + +0800075c : + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + 800075c: b580 push {r7, lr} + 800075e: b086 sub sp, #24 + 8000760: af00 add r7, sp, #0 + 8000762: 6078 str r0, [r7, #4] + 8000764: 6039 str r1, [r7, #0] + uint32_t position = 0x00u; + 8000766: 2300 movs r3, #0 + 8000768: 617b str r3, [r7, #20] + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + 800076a: e14f b.n 8000a0c + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + 800076c: 683b ldr r3, [r7, #0] + 800076e: 681b ldr r3, [r3, #0] + 8000770: 2101 movs r1, #1 + 8000772: 697a ldr r2, [r7, #20] + 8000774: 4091 lsls r1, r2 + 8000776: 000a movs r2, r1 + 8000778: 4013 ands r3, r2 + 800077a: 60fb str r3, [r7, #12] + + if (iocurrent != 0x00u) + 800077c: 68fb ldr r3, [r7, #12] + 800077e: 2b00 cmp r3, #0 + 8000780: d100 bne.n 8000784 + 8000782: e140 b.n 8000a06 + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + 8000784: 683b ldr r3, [r7, #0] + 8000786: 685b ldr r3, [r3, #4] + 8000788: 2b01 cmp r3, #1 + 800078a: d00b beq.n 80007a4 + 800078c: 683b ldr r3, [r7, #0] + 800078e: 685b ldr r3, [r3, #4] + 8000790: 2b02 cmp r3, #2 + 8000792: d007 beq.n 80007a4 + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + 8000794: 683b ldr r3, [r7, #0] + 8000796: 685b ldr r3, [r3, #4] + if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + 8000798: 2b11 cmp r3, #17 + 800079a: d003 beq.n 80007a4 + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + 800079c: 683b ldr r3, [r7, #0] + 800079e: 685b ldr r3, [r3, #4] + 80007a0: 2b12 cmp r3, #18 + 80007a2: d130 bne.n 8000806 + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + 80007a4: 687b ldr r3, [r7, #4] + 80007a6: 689b ldr r3, [r3, #8] + 80007a8: 613b str r3, [r7, #16] + temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u)); + 80007aa: 697b ldr r3, [r7, #20] + 80007ac: 005b lsls r3, r3, #1 + 80007ae: 2203 movs r2, #3 + 80007b0: 409a lsls r2, r3 + 80007b2: 0013 movs r3, r2 + 80007b4: 43da mvns r2, r3 + 80007b6: 693b ldr r3, [r7, #16] + 80007b8: 4013 ands r3, r2 + 80007ba: 613b str r3, [r7, #16] + temp |= (GPIO_Init->Speed << (position * 2u)); + 80007bc: 683b ldr r3, [r7, #0] + 80007be: 68da ldr r2, [r3, #12] + 80007c0: 697b ldr r3, [r7, #20] + 80007c2: 005b lsls r3, r3, #1 + 80007c4: 409a lsls r2, r3 + 80007c6: 0013 movs r3, r2 + 80007c8: 693a ldr r2, [r7, #16] + 80007ca: 4313 orrs r3, r2 + 80007cc: 613b str r3, [r7, #16] + GPIOx->OSPEEDR = temp; + 80007ce: 687b ldr r3, [r7, #4] + 80007d0: 693a ldr r2, [r7, #16] + 80007d2: 609a str r2, [r3, #8] + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + 80007d4: 687b ldr r3, [r7, #4] + 80007d6: 685b ldr r3, [r3, #4] + 80007d8: 613b str r3, [r7, #16] + temp &= ~(GPIO_OTYPER_OT_0 << position) ; + 80007da: 2201 movs r2, #1 + 80007dc: 697b ldr r3, [r7, #20] + 80007de: 409a lsls r2, r3 + 80007e0: 0013 movs r3, r2 + 80007e2: 43da mvns r2, r3 + 80007e4: 693b ldr r3, [r7, #16] + 80007e6: 4013 ands r3, r2 + 80007e8: 613b str r3, [r7, #16] + temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position); + 80007ea: 683b ldr r3, [r7, #0] + 80007ec: 685b ldr r3, [r3, #4] + 80007ee: 091b lsrs r3, r3, #4 + 80007f0: 2201 movs r2, #1 + 80007f2: 401a ands r2, r3 + 80007f4: 697b ldr r3, [r7, #20] + 80007f6: 409a lsls r2, r3 + 80007f8: 0013 movs r3, r2 + 80007fa: 693a ldr r2, [r7, #16] + 80007fc: 4313 orrs r3, r2 + 80007fe: 613b str r3, [r7, #16] + GPIOx->OTYPER = temp; + 8000800: 687b ldr r3, [r7, #4] + 8000802: 693a ldr r2, [r7, #16] + 8000804: 605a str r2, [r3, #4] + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + 8000806: 687b ldr r3, [r7, #4] + 8000808: 68db ldr r3, [r3, #12] + 800080a: 613b str r3, [r7, #16] + temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u)); + 800080c: 697b ldr r3, [r7, #20] + 800080e: 005b lsls r3, r3, #1 + 8000810: 2203 movs r2, #3 + 8000812: 409a lsls r2, r3 + 8000814: 0013 movs r3, r2 + 8000816: 43da mvns r2, r3 + 8000818: 693b ldr r3, [r7, #16] + 800081a: 4013 ands r3, r2 + 800081c: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Pull) << (position * 2u)); + 800081e: 683b ldr r3, [r7, #0] + 8000820: 689a ldr r2, [r3, #8] + 8000822: 697b ldr r3, [r7, #20] + 8000824: 005b lsls r3, r3, #1 + 8000826: 409a lsls r2, r3 + 8000828: 0013 movs r3, r2 + 800082a: 693a ldr r2, [r7, #16] + 800082c: 4313 orrs r3, r2 + 800082e: 613b str r3, [r7, #16] + GPIOx->PUPDR = temp; + 8000830: 687b ldr r3, [r7, #4] + 8000832: 693a ldr r2, [r7, #16] + 8000834: 60da str r2, [r3, #12] + + /* In case of Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + 8000836: 683b ldr r3, [r7, #0] + 8000838: 685b ldr r3, [r3, #4] + 800083a: 2b02 cmp r3, #2 + 800083c: d003 beq.n 8000846 + 800083e: 683b ldr r3, [r7, #0] + 8000840: 685b ldr r3, [r3, #4] + 8000842: 2b12 cmp r3, #18 + 8000844: d123 bne.n 800088e + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + 8000846: 697b ldr r3, [r7, #20] + 8000848: 08da lsrs r2, r3, #3 + 800084a: 687b ldr r3, [r7, #4] + 800084c: 3208 adds r2, #8 + 800084e: 0092 lsls r2, r2, #2 + 8000850: 58d3 ldr r3, [r2, r3] + 8000852: 613b str r3, [r7, #16] + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + 8000854: 697b ldr r3, [r7, #20] + 8000856: 2207 movs r2, #7 + 8000858: 4013 ands r3, r2 + 800085a: 009b lsls r3, r3, #2 + 800085c: 220f movs r2, #15 + 800085e: 409a lsls r2, r3 + 8000860: 0013 movs r3, r2 + 8000862: 43da mvns r2, r3 + 8000864: 693b ldr r3, [r7, #16] + 8000866: 4013 ands r3, r2 + 8000868: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + 800086a: 683b ldr r3, [r7, #0] + 800086c: 691a ldr r2, [r3, #16] + 800086e: 697b ldr r3, [r7, #20] + 8000870: 2107 movs r1, #7 + 8000872: 400b ands r3, r1 + 8000874: 009b lsls r3, r3, #2 + 8000876: 409a lsls r2, r3 + 8000878: 0013 movs r3, r2 + 800087a: 693a ldr r2, [r7, #16] + 800087c: 4313 orrs r3, r2 + 800087e: 613b str r3, [r7, #16] + GPIOx->AFR[position >> 3u] = temp; + 8000880: 697b ldr r3, [r7, #20] + 8000882: 08da lsrs r2, r3, #3 + 8000884: 687b ldr r3, [r7, #4] + 8000886: 3208 adds r2, #8 + 8000888: 0092 lsls r2, r2, #2 + 800088a: 6939 ldr r1, [r7, #16] + 800088c: 50d1 str r1, [r2, r3] + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + 800088e: 687b ldr r3, [r7, #4] + 8000890: 681b ldr r3, [r3, #0] + 8000892: 613b str r3, [r7, #16] + temp &= ~(GPIO_MODER_MODER0 << (position * 2u)); + 8000894: 697b ldr r3, [r7, #20] + 8000896: 005b lsls r3, r3, #1 + 8000898: 2203 movs r2, #3 + 800089a: 409a lsls r2, r3 + 800089c: 0013 movs r3, r2 + 800089e: 43da mvns r2, r3 + 80008a0: 693b ldr r3, [r7, #16] + 80008a2: 4013 ands r3, r2 + 80008a4: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + 80008a6: 683b ldr r3, [r7, #0] + 80008a8: 685b ldr r3, [r3, #4] + 80008aa: 2203 movs r2, #3 + 80008ac: 401a ands r2, r3 + 80008ae: 697b ldr r3, [r7, #20] + 80008b0: 005b lsls r3, r3, #1 + 80008b2: 409a lsls r2, r3 + 80008b4: 0013 movs r3, r2 + 80008b6: 693a ldr r2, [r7, #16] + 80008b8: 4313 orrs r3, r2 + 80008ba: 613b str r3, [r7, #16] + GPIOx->MODER = temp; + 80008bc: 687b ldr r3, [r7, #4] + 80008be: 693a ldr r2, [r7, #16] + 80008c0: 601a str r2, [r3, #0] + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + 80008c2: 683b ldr r3, [r7, #0] + 80008c4: 685a ldr r2, [r3, #4] + 80008c6: 2380 movs r3, #128 ; 0x80 + 80008c8: 055b lsls r3, r3, #21 + 80008ca: 4013 ands r3, r2 + 80008cc: d100 bne.n 80008d0 + 80008ce: e09a b.n 8000a06 + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + 80008d0: 4b54 ldr r3, [pc, #336] ; (8000a24 ) + 80008d2: 699a ldr r2, [r3, #24] + 80008d4: 4b53 ldr r3, [pc, #332] ; (8000a24 ) + 80008d6: 2101 movs r1, #1 + 80008d8: 430a orrs r2, r1 + 80008da: 619a str r2, [r3, #24] + 80008dc: 4b51 ldr r3, [pc, #324] ; (8000a24 ) + 80008de: 699b ldr r3, [r3, #24] + 80008e0: 2201 movs r2, #1 + 80008e2: 4013 ands r3, r2 + 80008e4: 60bb str r3, [r7, #8] + 80008e6: 68bb ldr r3, [r7, #8] + + temp = SYSCFG->EXTICR[position >> 2u]; + 80008e8: 4a4f ldr r2, [pc, #316] ; (8000a28 ) + 80008ea: 697b ldr r3, [r7, #20] + 80008ec: 089b lsrs r3, r3, #2 + 80008ee: 3302 adds r3, #2 + 80008f0: 009b lsls r3, r3, #2 + 80008f2: 589b ldr r3, [r3, r2] + 80008f4: 613b str r3, [r7, #16] + temp &= ~(0x0FuL << (4u * (position & 0x03u))); + 80008f6: 697b ldr r3, [r7, #20] + 80008f8: 2203 movs r2, #3 + 80008fa: 4013 ands r3, r2 + 80008fc: 009b lsls r3, r3, #2 + 80008fe: 220f movs r2, #15 + 8000900: 409a lsls r2, r3 + 8000902: 0013 movs r3, r2 + 8000904: 43da mvns r2, r3 + 8000906: 693b ldr r3, [r7, #16] + 8000908: 4013 ands r3, r2 + 800090a: 613b str r3, [r7, #16] + temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); + 800090c: 687a ldr r2, [r7, #4] + 800090e: 2390 movs r3, #144 ; 0x90 + 8000910: 05db lsls r3, r3, #23 + 8000912: 429a cmp r2, r3 + 8000914: d013 beq.n 800093e + 8000916: 687b ldr r3, [r7, #4] + 8000918: 4a44 ldr r2, [pc, #272] ; (8000a2c ) + 800091a: 4293 cmp r3, r2 + 800091c: d00d beq.n 800093a + 800091e: 687b ldr r3, [r7, #4] + 8000920: 4a43 ldr r2, [pc, #268] ; (8000a30 ) + 8000922: 4293 cmp r3, r2 + 8000924: d007 beq.n 8000936 + 8000926: 687b ldr r3, [r7, #4] + 8000928: 4a42 ldr r2, [pc, #264] ; (8000a34 ) + 800092a: 4293 cmp r3, r2 + 800092c: d101 bne.n 8000932 + 800092e: 2303 movs r3, #3 + 8000930: e006 b.n 8000940 + 8000932: 2305 movs r3, #5 + 8000934: e004 b.n 8000940 + 8000936: 2302 movs r3, #2 + 8000938: e002 b.n 8000940 + 800093a: 2301 movs r3, #1 + 800093c: e000 b.n 8000940 + 800093e: 2300 movs r3, #0 + 8000940: 697a ldr r2, [r7, #20] + 8000942: 2103 movs r1, #3 + 8000944: 400a ands r2, r1 + 8000946: 0092 lsls r2, r2, #2 + 8000948: 4093 lsls r3, r2 + 800094a: 693a ldr r2, [r7, #16] + 800094c: 4313 orrs r3, r2 + 800094e: 613b str r3, [r7, #16] + SYSCFG->EXTICR[position >> 2u] = temp; + 8000950: 4935 ldr r1, [pc, #212] ; (8000a28 ) + 8000952: 697b ldr r3, [r7, #20] + 8000954: 089b lsrs r3, r3, #2 + 8000956: 3302 adds r3, #2 + 8000958: 009b lsls r3, r3, #2 + 800095a: 693a ldr r2, [r7, #16] + 800095c: 505a str r2, [r3, r1] + + /* Clear EXTI line configuration */ + temp = EXTI->IMR; + 800095e: 4b36 ldr r3, [pc, #216] ; (8000a38 ) + 8000960: 681b ldr r3, [r3, #0] + 8000962: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 8000964: 68fb ldr r3, [r7, #12] + 8000966: 43da mvns r2, r3 + 8000968: 693b ldr r3, [r7, #16] + 800096a: 4013 ands r3, r2 + 800096c: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + 800096e: 683b ldr r3, [r7, #0] + 8000970: 685a ldr r2, [r3, #4] + 8000972: 2380 movs r3, #128 ; 0x80 + 8000974: 025b lsls r3, r3, #9 + 8000976: 4013 ands r3, r2 + 8000978: d003 beq.n 8000982 + { + temp |= iocurrent; + 800097a: 693a ldr r2, [r7, #16] + 800097c: 68fb ldr r3, [r7, #12] + 800097e: 4313 orrs r3, r2 + 8000980: 613b str r3, [r7, #16] + } + EXTI->IMR = temp; + 8000982: 4b2d ldr r3, [pc, #180] ; (8000a38 ) + 8000984: 693a ldr r2, [r7, #16] + 8000986: 601a str r2, [r3, #0] + + temp = EXTI->EMR; + 8000988: 4b2b ldr r3, [pc, #172] ; (8000a38 ) + 800098a: 685b ldr r3, [r3, #4] + 800098c: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 800098e: 68fb ldr r3, [r7, #12] + 8000990: 43da mvns r2, r3 + 8000992: 693b ldr r3, [r7, #16] + 8000994: 4013 ands r3, r2 + 8000996: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + 8000998: 683b ldr r3, [r7, #0] + 800099a: 685a ldr r2, [r3, #4] + 800099c: 2380 movs r3, #128 ; 0x80 + 800099e: 029b lsls r3, r3, #10 + 80009a0: 4013 ands r3, r2 + 80009a2: d003 beq.n 80009ac + { + temp |= iocurrent; + 80009a4: 693a ldr r2, [r7, #16] + 80009a6: 68fb ldr r3, [r7, #12] + 80009a8: 4313 orrs r3, r2 + 80009aa: 613b str r3, [r7, #16] + } + EXTI->EMR = temp; + 80009ac: 4b22 ldr r3, [pc, #136] ; (8000a38 ) + 80009ae: 693a ldr r2, [r7, #16] + 80009b0: 605a str r2, [r3, #4] + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR; + 80009b2: 4b21 ldr r3, [pc, #132] ; (8000a38 ) + 80009b4: 689b ldr r3, [r3, #8] + 80009b6: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 80009b8: 68fb ldr r3, [r7, #12] + 80009ba: 43da mvns r2, r3 + 80009bc: 693b ldr r3, [r7, #16] + 80009be: 4013 ands r3, r2 + 80009c0: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + 80009c2: 683b ldr r3, [r7, #0] + 80009c4: 685a ldr r2, [r3, #4] + 80009c6: 2380 movs r3, #128 ; 0x80 + 80009c8: 035b lsls r3, r3, #13 + 80009ca: 4013 ands r3, r2 + 80009cc: d003 beq.n 80009d6 + { + temp |= iocurrent; + 80009ce: 693a ldr r2, [r7, #16] + 80009d0: 68fb ldr r3, [r7, #12] + 80009d2: 4313 orrs r3, r2 + 80009d4: 613b str r3, [r7, #16] + } + EXTI->RTSR = temp; + 80009d6: 4b18 ldr r3, [pc, #96] ; (8000a38 ) + 80009d8: 693a ldr r2, [r7, #16] + 80009da: 609a str r2, [r3, #8] + + temp = EXTI->FTSR; + 80009dc: 4b16 ldr r3, [pc, #88] ; (8000a38 ) + 80009de: 68db ldr r3, [r3, #12] + 80009e0: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 80009e2: 68fb ldr r3, [r7, #12] + 80009e4: 43da mvns r2, r3 + 80009e6: 693b ldr r3, [r7, #16] + 80009e8: 4013 ands r3, r2 + 80009ea: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + 80009ec: 683b ldr r3, [r7, #0] + 80009ee: 685a ldr r2, [r3, #4] + 80009f0: 2380 movs r3, #128 ; 0x80 + 80009f2: 039b lsls r3, r3, #14 + 80009f4: 4013 ands r3, r2 + 80009f6: d003 beq.n 8000a00 + { + temp |= iocurrent; + 80009f8: 693a ldr r2, [r7, #16] + 80009fa: 68fb ldr r3, [r7, #12] + 80009fc: 4313 orrs r3, r2 + 80009fe: 613b str r3, [r7, #16] + } + EXTI->FTSR = temp; + 8000a00: 4b0d ldr r3, [pc, #52] ; (8000a38 ) + 8000a02: 693a ldr r2, [r7, #16] + 8000a04: 60da str r2, [r3, #12] + } + } + + position++; + 8000a06: 697b ldr r3, [r7, #20] + 8000a08: 3301 adds r3, #1 + 8000a0a: 617b str r3, [r7, #20] + while (((GPIO_Init->Pin) >> position) != 0x00u) + 8000a0c: 683b ldr r3, [r7, #0] + 8000a0e: 681a ldr r2, [r3, #0] + 8000a10: 697b ldr r3, [r7, #20] + 8000a12: 40da lsrs r2, r3 + 8000a14: 1e13 subs r3, r2, #0 + 8000a16: d000 beq.n 8000a1a + 8000a18: e6a8 b.n 800076c + } +} + 8000a1a: 46c0 nop ; (mov r8, r8) + 8000a1c: 46bd mov sp, r7 + 8000a1e: b006 add sp, #24 + 8000a20: bd80 pop {r7, pc} + 8000a22: 46c0 nop ; (mov r8, r8) + 8000a24: 40021000 .word 0x40021000 + 8000a28: 40010000 .word 0x40010000 + 8000a2c: 48000400 .word 0x48000400 + 8000a30: 48000800 .word 0x48000800 + 8000a34: 48000c00 .word 0x48000c00 + 8000a38: 40010400 .word 0x40010400 + +08000a3c : + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + 8000a3c: b580 push {r7, lr} + 8000a3e: b084 sub sp, #16 + 8000a40: af00 add r7, sp, #0 + 8000a42: 6078 str r0, [r7, #4] + 8000a44: 000a movs r2, r1 + 8000a46: 1cbb adds r3, r7, #2 + 8000a48: 801a strh r2, [r3, #0] + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + 8000a4a: 687b ldr r3, [r7, #4] + 8000a4c: 691b ldr r3, [r3, #16] + 8000a4e: 1cba adds r2, r7, #2 + 8000a50: 8812 ldrh r2, [r2, #0] + 8000a52: 4013 ands r3, r2 + 8000a54: d004 beq.n 8000a60 + { + bitstatus = GPIO_PIN_SET; + 8000a56: 230f movs r3, #15 + 8000a58: 18fb adds r3, r7, r3 + 8000a5a: 2201 movs r2, #1 + 8000a5c: 701a strb r2, [r3, #0] + 8000a5e: e003 b.n 8000a68 + } + else + { + bitstatus = GPIO_PIN_RESET; + 8000a60: 230f movs r3, #15 + 8000a62: 18fb adds r3, r7, r3 + 8000a64: 2200 movs r2, #0 + 8000a66: 701a strb r2, [r3, #0] + } + return bitstatus; + 8000a68: 230f movs r3, #15 + 8000a6a: 18fb adds r3, r7, r3 + 8000a6c: 781b ldrb r3, [r3, #0] + } + 8000a6e: 0018 movs r0, r3 + 8000a70: 46bd mov sp, r7 + 8000a72: b004 add sp, #16 + 8000a74: bd80 pop {r7, pc} + +08000a76 : + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + 8000a76: b580 push {r7, lr} + 8000a78: b082 sub sp, #8 + 8000a7a: af00 add r7, sp, #0 + 8000a7c: 6078 str r0, [r7, #4] + 8000a7e: 0008 movs r0, r1 + 8000a80: 0011 movs r1, r2 + 8000a82: 1cbb adds r3, r7, #2 + 8000a84: 1c02 adds r2, r0, #0 + 8000a86: 801a strh r2, [r3, #0] + 8000a88: 1c7b adds r3, r7, #1 + 8000a8a: 1c0a adds r2, r1, #0 + 8000a8c: 701a strb r2, [r3, #0] + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + 8000a8e: 1c7b adds r3, r7, #1 + 8000a90: 781b ldrb r3, [r3, #0] + 8000a92: 2b00 cmp r3, #0 + 8000a94: d004 beq.n 8000aa0 + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + 8000a96: 1cbb adds r3, r7, #2 + 8000a98: 881a ldrh r2, [r3, #0] + 8000a9a: 687b ldr r3, [r7, #4] + 8000a9c: 619a str r2, [r3, #24] + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + 8000a9e: e003 b.n 8000aa8 + GPIOx->BRR = (uint32_t)GPIO_Pin; + 8000aa0: 1cbb adds r3, r7, #2 + 8000aa2: 881a ldrh r2, [r3, #0] + 8000aa4: 687b ldr r3, [r7, #4] + 8000aa6: 629a str r2, [r3, #40] ; 0x28 +} + 8000aa8: 46c0 nop ; (mov r8, r8) + 8000aaa: 46bd mov sp, r7 + 8000aac: b002 add sp, #8 + 8000aae: bd80 pop {r7, pc} + +08000ab0 : + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + 8000ab0: b580 push {r7, lr} + 8000ab2: b088 sub sp, #32 + 8000ab4: af00 add r7, sp, #0 + 8000ab6: 6078 str r0, [r7, #4] + uint32_t tickstart; + uint32_t pll_config; + uint32_t pll_config2; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + 8000ab8: 687b ldr r3, [r7, #4] + 8000aba: 2b00 cmp r3, #0 + 8000abc: d101 bne.n 8000ac2 + { + return HAL_ERROR; + 8000abe: 2301 movs r3, #1 + 8000ac0: e303 b.n 80010ca + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + 8000ac2: 687b ldr r3, [r7, #4] + 8000ac4: 681b ldr r3, [r3, #0] + 8000ac6: 2201 movs r2, #1 + 8000ac8: 4013 ands r3, r2 + 8000aca: d100 bne.n 8000ace + 8000acc: e08d b.n 8000bea + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + 8000ace: 4bc4 ldr r3, [pc, #784] ; (8000de0 ) + 8000ad0: 685b ldr r3, [r3, #4] + 8000ad2: 220c movs r2, #12 + 8000ad4: 4013 ands r3, r2 + 8000ad6: 2b04 cmp r3, #4 + 8000ad8: d00e beq.n 8000af8 + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + 8000ada: 4bc1 ldr r3, [pc, #772] ; (8000de0 ) + 8000adc: 685b ldr r3, [r3, #4] + 8000ade: 220c movs r2, #12 + 8000ae0: 4013 ands r3, r2 + 8000ae2: 2b08 cmp r3, #8 + 8000ae4: d116 bne.n 8000b14 + 8000ae6: 4bbe ldr r3, [pc, #760] ; (8000de0 ) + 8000ae8: 685a ldr r2, [r3, #4] + 8000aea: 2380 movs r3, #128 ; 0x80 + 8000aec: 025b lsls r3, r3, #9 + 8000aee: 401a ands r2, r3 + 8000af0: 2380 movs r3, #128 ; 0x80 + 8000af2: 025b lsls r3, r3, #9 + 8000af4: 429a cmp r2, r3 + 8000af6: d10d bne.n 8000b14 + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 8000af8: 4bb9 ldr r3, [pc, #740] ; (8000de0 ) + 8000afa: 681a ldr r2, [r3, #0] + 8000afc: 2380 movs r3, #128 ; 0x80 + 8000afe: 029b lsls r3, r3, #10 + 8000b00: 4013 ands r3, r2 + 8000b02: d100 bne.n 8000b06 + 8000b04: e070 b.n 8000be8 + 8000b06: 687b ldr r3, [r7, #4] + 8000b08: 685b ldr r3, [r3, #4] + 8000b0a: 2b00 cmp r3, #0 + 8000b0c: d000 beq.n 8000b10 + 8000b0e: e06b b.n 8000be8 + { + return HAL_ERROR; + 8000b10: 2301 movs r3, #1 + 8000b12: e2da b.n 80010ca + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + 8000b14: 687b ldr r3, [r7, #4] + 8000b16: 685b ldr r3, [r3, #4] + 8000b18: 2b01 cmp r3, #1 + 8000b1a: d107 bne.n 8000b2c + 8000b1c: 4bb0 ldr r3, [pc, #704] ; (8000de0 ) + 8000b1e: 681a ldr r2, [r3, #0] + 8000b20: 4baf ldr r3, [pc, #700] ; (8000de0 ) + 8000b22: 2180 movs r1, #128 ; 0x80 + 8000b24: 0249 lsls r1, r1, #9 + 8000b26: 430a orrs r2, r1 + 8000b28: 601a str r2, [r3, #0] + 8000b2a: e02f b.n 8000b8c + 8000b2c: 687b ldr r3, [r7, #4] + 8000b2e: 685b ldr r3, [r3, #4] + 8000b30: 2b00 cmp r3, #0 + 8000b32: d10c bne.n 8000b4e + 8000b34: 4baa ldr r3, [pc, #680] ; (8000de0 ) + 8000b36: 681a ldr r2, [r3, #0] + 8000b38: 4ba9 ldr r3, [pc, #676] ; (8000de0 ) + 8000b3a: 49aa ldr r1, [pc, #680] ; (8000de4 ) + 8000b3c: 400a ands r2, r1 + 8000b3e: 601a str r2, [r3, #0] + 8000b40: 4ba7 ldr r3, [pc, #668] ; (8000de0 ) + 8000b42: 681a ldr r2, [r3, #0] + 8000b44: 4ba6 ldr r3, [pc, #664] ; (8000de0 ) + 8000b46: 49a8 ldr r1, [pc, #672] ; (8000de8 ) + 8000b48: 400a ands r2, r1 + 8000b4a: 601a str r2, [r3, #0] + 8000b4c: e01e b.n 8000b8c + 8000b4e: 687b ldr r3, [r7, #4] + 8000b50: 685b ldr r3, [r3, #4] + 8000b52: 2b05 cmp r3, #5 + 8000b54: d10e bne.n 8000b74 + 8000b56: 4ba2 ldr r3, [pc, #648] ; (8000de0 ) + 8000b58: 681a ldr r2, [r3, #0] + 8000b5a: 4ba1 ldr r3, [pc, #644] ; (8000de0 ) + 8000b5c: 2180 movs r1, #128 ; 0x80 + 8000b5e: 02c9 lsls r1, r1, #11 + 8000b60: 430a orrs r2, r1 + 8000b62: 601a str r2, [r3, #0] + 8000b64: 4b9e ldr r3, [pc, #632] ; (8000de0 ) + 8000b66: 681a ldr r2, [r3, #0] + 8000b68: 4b9d ldr r3, [pc, #628] ; (8000de0 ) + 8000b6a: 2180 movs r1, #128 ; 0x80 + 8000b6c: 0249 lsls r1, r1, #9 + 8000b6e: 430a orrs r2, r1 + 8000b70: 601a str r2, [r3, #0] + 8000b72: e00b b.n 8000b8c + 8000b74: 4b9a ldr r3, [pc, #616] ; (8000de0 ) + 8000b76: 681a ldr r2, [r3, #0] + 8000b78: 4b99 ldr r3, [pc, #612] ; (8000de0 ) + 8000b7a: 499a ldr r1, [pc, #616] ; (8000de4 ) + 8000b7c: 400a ands r2, r1 + 8000b7e: 601a str r2, [r3, #0] + 8000b80: 4b97 ldr r3, [pc, #604] ; (8000de0 ) + 8000b82: 681a ldr r2, [r3, #0] + 8000b84: 4b96 ldr r3, [pc, #600] ; (8000de0 ) + 8000b86: 4998 ldr r1, [pc, #608] ; (8000de8 ) + 8000b88: 400a ands r2, r1 + 8000b8a: 601a str r2, [r3, #0] + + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + 8000b8c: 687b ldr r3, [r7, #4] + 8000b8e: 685b ldr r3, [r3, #4] + 8000b90: 2b00 cmp r3, #0 + 8000b92: d014 beq.n 8000bbe + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000b94: f7ff fd02 bl 800059c + 8000b98: 0003 movs r3, r0 + 8000b9a: 61bb str r3, [r7, #24] + + /* Wait till HSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 8000b9c: e008 b.n 8000bb0 + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + 8000b9e: f7ff fcfd bl 800059c + 8000ba2: 0002 movs r2, r0 + 8000ba4: 69bb ldr r3, [r7, #24] + 8000ba6: 1ad3 subs r3, r2, r3 + 8000ba8: 2b64 cmp r3, #100 ; 0x64 + 8000baa: d901 bls.n 8000bb0 + { + return HAL_TIMEOUT; + 8000bac: 2303 movs r3, #3 + 8000bae: e28c b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 8000bb0: 4b8b ldr r3, [pc, #556] ; (8000de0 ) + 8000bb2: 681a ldr r2, [r3, #0] + 8000bb4: 2380 movs r3, #128 ; 0x80 + 8000bb6: 029b lsls r3, r3, #10 + 8000bb8: 4013 ands r3, r2 + 8000bba: d0f0 beq.n 8000b9e + 8000bbc: e015 b.n 8000bea + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000bbe: f7ff fced bl 800059c + 8000bc2: 0003 movs r3, r0 + 8000bc4: 61bb str r3, [r7, #24] + + /* Wait till HSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + 8000bc6: e008 b.n 8000bda + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + 8000bc8: f7ff fce8 bl 800059c + 8000bcc: 0002 movs r2, r0 + 8000bce: 69bb ldr r3, [r7, #24] + 8000bd0: 1ad3 subs r3, r2, r3 + 8000bd2: 2b64 cmp r3, #100 ; 0x64 + 8000bd4: d901 bls.n 8000bda + { + return HAL_TIMEOUT; + 8000bd6: 2303 movs r3, #3 + 8000bd8: e277 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + 8000bda: 4b81 ldr r3, [pc, #516] ; (8000de0 ) + 8000bdc: 681a ldr r2, [r3, #0] + 8000bde: 2380 movs r3, #128 ; 0x80 + 8000be0: 029b lsls r3, r3, #10 + 8000be2: 4013 ands r3, r2 + 8000be4: d1f0 bne.n 8000bc8 + 8000be6: e000 b.n 8000bea + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 8000be8: 46c0 nop ; (mov r8, r8) + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + 8000bea: 687b ldr r3, [r7, #4] + 8000bec: 681b ldr r3, [r3, #0] + 8000bee: 2202 movs r2, #2 + 8000bf0: 4013 ands r3, r2 + 8000bf2: d100 bne.n 8000bf6 + 8000bf4: e069 b.n 8000cca + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + 8000bf6: 4b7a ldr r3, [pc, #488] ; (8000de0 ) + 8000bf8: 685b ldr r3, [r3, #4] + 8000bfa: 220c movs r2, #12 + 8000bfc: 4013 ands r3, r2 + 8000bfe: d00b beq.n 8000c18 + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI))) + 8000c00: 4b77 ldr r3, [pc, #476] ; (8000de0 ) + 8000c02: 685b ldr r3, [r3, #4] + 8000c04: 220c movs r2, #12 + 8000c06: 4013 ands r3, r2 + 8000c08: 2b08 cmp r3, #8 + 8000c0a: d11c bne.n 8000c46 + 8000c0c: 4b74 ldr r3, [pc, #464] ; (8000de0 ) + 8000c0e: 685a ldr r2, [r3, #4] + 8000c10: 2380 movs r3, #128 ; 0x80 + 8000c12: 025b lsls r3, r3, #9 + 8000c14: 4013 ands r3, r2 + 8000c16: d116 bne.n 8000c46 + { + /* When HSI is used as system clock it will not disabled */ + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + 8000c18: 4b71 ldr r3, [pc, #452] ; (8000de0 ) + 8000c1a: 681b ldr r3, [r3, #0] + 8000c1c: 2202 movs r2, #2 + 8000c1e: 4013 ands r3, r2 + 8000c20: d005 beq.n 8000c2e + 8000c22: 687b ldr r3, [r7, #4] + 8000c24: 68db ldr r3, [r3, #12] + 8000c26: 2b01 cmp r3, #1 + 8000c28: d001 beq.n 8000c2e + { + return HAL_ERROR; + 8000c2a: 2301 movs r3, #1 + 8000c2c: e24d b.n 80010ca + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 8000c2e: 4b6c ldr r3, [pc, #432] ; (8000de0 ) + 8000c30: 681b ldr r3, [r3, #0] + 8000c32: 22f8 movs r2, #248 ; 0xf8 + 8000c34: 4393 bics r3, r2 + 8000c36: 0019 movs r1, r3 + 8000c38: 687b ldr r3, [r7, #4] + 8000c3a: 691b ldr r3, [r3, #16] + 8000c3c: 00da lsls r2, r3, #3 + 8000c3e: 4b68 ldr r3, [pc, #416] ; (8000de0 ) + 8000c40: 430a orrs r2, r1 + 8000c42: 601a str r2, [r3, #0] + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + 8000c44: e041 b.n 8000cca + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + 8000c46: 687b ldr r3, [r7, #4] + 8000c48: 68db ldr r3, [r3, #12] + 8000c4a: 2b00 cmp r3, #0 + 8000c4c: d024 beq.n 8000c98 + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + 8000c4e: 4b64 ldr r3, [pc, #400] ; (8000de0 ) + 8000c50: 681a ldr r2, [r3, #0] + 8000c52: 4b63 ldr r3, [pc, #396] ; (8000de0 ) + 8000c54: 2101 movs r1, #1 + 8000c56: 430a orrs r2, r1 + 8000c58: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000c5a: f7ff fc9f bl 800059c + 8000c5e: 0003 movs r3, r0 + 8000c60: 61bb str r3, [r7, #24] + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 8000c62: e008 b.n 8000c76 + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + 8000c64: f7ff fc9a bl 800059c + 8000c68: 0002 movs r2, r0 + 8000c6a: 69bb ldr r3, [r7, #24] + 8000c6c: 1ad3 subs r3, r2, r3 + 8000c6e: 2b02 cmp r3, #2 + 8000c70: d901 bls.n 8000c76 + { + return HAL_TIMEOUT; + 8000c72: 2303 movs r3, #3 + 8000c74: e229 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 8000c76: 4b5a ldr r3, [pc, #360] ; (8000de0 ) + 8000c78: 681b ldr r3, [r3, #0] + 8000c7a: 2202 movs r2, #2 + 8000c7c: 4013 ands r3, r2 + 8000c7e: d0f1 beq.n 8000c64 + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 8000c80: 4b57 ldr r3, [pc, #348] ; (8000de0 ) + 8000c82: 681b ldr r3, [r3, #0] + 8000c84: 22f8 movs r2, #248 ; 0xf8 + 8000c86: 4393 bics r3, r2 + 8000c88: 0019 movs r1, r3 + 8000c8a: 687b ldr r3, [r7, #4] + 8000c8c: 691b ldr r3, [r3, #16] + 8000c8e: 00da lsls r2, r3, #3 + 8000c90: 4b53 ldr r3, [pc, #332] ; (8000de0 ) + 8000c92: 430a orrs r2, r1 + 8000c94: 601a str r2, [r3, #0] + 8000c96: e018 b.n 8000cca + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + 8000c98: 4b51 ldr r3, [pc, #324] ; (8000de0 ) + 8000c9a: 681a ldr r2, [r3, #0] + 8000c9c: 4b50 ldr r3, [pc, #320] ; (8000de0 ) + 8000c9e: 2101 movs r1, #1 + 8000ca0: 438a bics r2, r1 + 8000ca2: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000ca4: f7ff fc7a bl 800059c + 8000ca8: 0003 movs r3, r0 + 8000caa: 61bb str r3, [r7, #24] + + /* Wait till HSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + 8000cac: e008 b.n 8000cc0 + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + 8000cae: f7ff fc75 bl 800059c + 8000cb2: 0002 movs r2, r0 + 8000cb4: 69bb ldr r3, [r7, #24] + 8000cb6: 1ad3 subs r3, r2, r3 + 8000cb8: 2b02 cmp r3, #2 + 8000cba: d901 bls.n 8000cc0 + { + return HAL_TIMEOUT; + 8000cbc: 2303 movs r3, #3 + 8000cbe: e204 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + 8000cc0: 4b47 ldr r3, [pc, #284] ; (8000de0 ) + 8000cc2: 681b ldr r3, [r3, #0] + 8000cc4: 2202 movs r2, #2 + 8000cc6: 4013 ands r3, r2 + 8000cc8: d1f1 bne.n 8000cae + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + 8000cca: 687b ldr r3, [r7, #4] + 8000ccc: 681b ldr r3, [r3, #0] + 8000cce: 2208 movs r2, #8 + 8000cd0: 4013 ands r3, r2 + 8000cd2: d036 beq.n 8000d42 + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + 8000cd4: 687b ldr r3, [r7, #4] + 8000cd6: 69db ldr r3, [r3, #28] + 8000cd8: 2b00 cmp r3, #0 + 8000cda: d019 beq.n 8000d10 + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + 8000cdc: 4b40 ldr r3, [pc, #256] ; (8000de0 ) + 8000cde: 6a5a ldr r2, [r3, #36] ; 0x24 + 8000ce0: 4b3f ldr r3, [pc, #252] ; (8000de0 ) + 8000ce2: 2101 movs r1, #1 + 8000ce4: 430a orrs r2, r1 + 8000ce6: 625a str r2, [r3, #36] ; 0x24 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000ce8: f7ff fc58 bl 800059c + 8000cec: 0003 movs r3, r0 + 8000cee: 61bb str r3, [r7, #24] + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + 8000cf0: e008 b.n 8000d04 + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + 8000cf2: f7ff fc53 bl 800059c + 8000cf6: 0002 movs r2, r0 + 8000cf8: 69bb ldr r3, [r7, #24] + 8000cfa: 1ad3 subs r3, r2, r3 + 8000cfc: 2b02 cmp r3, #2 + 8000cfe: d901 bls.n 8000d04 + { + return HAL_TIMEOUT; + 8000d00: 2303 movs r3, #3 + 8000d02: e1e2 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + 8000d04: 4b36 ldr r3, [pc, #216] ; (8000de0 ) + 8000d06: 6a5b ldr r3, [r3, #36] ; 0x24 + 8000d08: 2202 movs r2, #2 + 8000d0a: 4013 ands r3, r2 + 8000d0c: d0f1 beq.n 8000cf2 + 8000d0e: e018 b.n 8000d42 + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + 8000d10: 4b33 ldr r3, [pc, #204] ; (8000de0 ) + 8000d12: 6a5a ldr r2, [r3, #36] ; 0x24 + 8000d14: 4b32 ldr r3, [pc, #200] ; (8000de0 ) + 8000d16: 2101 movs r1, #1 + 8000d18: 438a bics r2, r1 + 8000d1a: 625a str r2, [r3, #36] ; 0x24 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000d1c: f7ff fc3e bl 800059c + 8000d20: 0003 movs r3, r0 + 8000d22: 61bb str r3, [r7, #24] + + /* Wait till LSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + 8000d24: e008 b.n 8000d38 + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + 8000d26: f7ff fc39 bl 800059c + 8000d2a: 0002 movs r2, r0 + 8000d2c: 69bb ldr r3, [r7, #24] + 8000d2e: 1ad3 subs r3, r2, r3 + 8000d30: 2b02 cmp r3, #2 + 8000d32: d901 bls.n 8000d38 + { + return HAL_TIMEOUT; + 8000d34: 2303 movs r3, #3 + 8000d36: e1c8 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + 8000d38: 4b29 ldr r3, [pc, #164] ; (8000de0 ) + 8000d3a: 6a5b ldr r3, [r3, #36] ; 0x24 + 8000d3c: 2202 movs r2, #2 + 8000d3e: 4013 ands r3, r2 + 8000d40: d1f1 bne.n 8000d26 + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + 8000d42: 687b ldr r3, [r7, #4] + 8000d44: 681b ldr r3, [r3, #0] + 8000d46: 2204 movs r2, #4 + 8000d48: 4013 ands r3, r2 + 8000d4a: d100 bne.n 8000d4e + 8000d4c: e0b6 b.n 8000ebc + { + FlagStatus pwrclkchanged = RESET; + 8000d4e: 231f movs r3, #31 + 8000d50: 18fb adds r3, r7, r3 + 8000d52: 2200 movs r2, #0 + 8000d54: 701a strb r2, [r3, #0] + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + 8000d56: 4b22 ldr r3, [pc, #136] ; (8000de0 ) + 8000d58: 69da ldr r2, [r3, #28] + 8000d5a: 2380 movs r3, #128 ; 0x80 + 8000d5c: 055b lsls r3, r3, #21 + 8000d5e: 4013 ands r3, r2 + 8000d60: d111 bne.n 8000d86 + { + __HAL_RCC_PWR_CLK_ENABLE(); + 8000d62: 4b1f ldr r3, [pc, #124] ; (8000de0 ) + 8000d64: 69da ldr r2, [r3, #28] + 8000d66: 4b1e ldr r3, [pc, #120] ; (8000de0 ) + 8000d68: 2180 movs r1, #128 ; 0x80 + 8000d6a: 0549 lsls r1, r1, #21 + 8000d6c: 430a orrs r2, r1 + 8000d6e: 61da str r2, [r3, #28] + 8000d70: 4b1b ldr r3, [pc, #108] ; (8000de0 ) + 8000d72: 69da ldr r2, [r3, #28] + 8000d74: 2380 movs r3, #128 ; 0x80 + 8000d76: 055b lsls r3, r3, #21 + 8000d78: 4013 ands r3, r2 + 8000d7a: 60fb str r3, [r7, #12] + 8000d7c: 68fb ldr r3, [r7, #12] + pwrclkchanged = SET; + 8000d7e: 231f movs r3, #31 + 8000d80: 18fb adds r3, r7, r3 + 8000d82: 2201 movs r2, #1 + 8000d84: 701a strb r2, [r3, #0] + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8000d86: 4b19 ldr r3, [pc, #100] ; (8000dec ) + 8000d88: 681a ldr r2, [r3, #0] + 8000d8a: 2380 movs r3, #128 ; 0x80 + 8000d8c: 005b lsls r3, r3, #1 + 8000d8e: 4013 ands r3, r2 + 8000d90: d11a bne.n 8000dc8 + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + 8000d92: 4b16 ldr r3, [pc, #88] ; (8000dec ) + 8000d94: 681a ldr r2, [r3, #0] + 8000d96: 4b15 ldr r3, [pc, #84] ; (8000dec ) + 8000d98: 2180 movs r1, #128 ; 0x80 + 8000d9a: 0049 lsls r1, r1, #1 + 8000d9c: 430a orrs r2, r1 + 8000d9e: 601a str r2, [r3, #0] + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + 8000da0: f7ff fbfc bl 800059c + 8000da4: 0003 movs r3, r0 + 8000da6: 61bb str r3, [r7, #24] + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8000da8: e008 b.n 8000dbc + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + 8000daa: f7ff fbf7 bl 800059c + 8000dae: 0002 movs r2, r0 + 8000db0: 69bb ldr r3, [r7, #24] + 8000db2: 1ad3 subs r3, r2, r3 + 8000db4: 2b64 cmp r3, #100 ; 0x64 + 8000db6: d901 bls.n 8000dbc + { + return HAL_TIMEOUT; + 8000db8: 2303 movs r3, #3 + 8000dba: e186 b.n 80010ca + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8000dbc: 4b0b ldr r3, [pc, #44] ; (8000dec ) + 8000dbe: 681a ldr r2, [r3, #0] + 8000dc0: 2380 movs r3, #128 ; 0x80 + 8000dc2: 005b lsls r3, r3, #1 + 8000dc4: 4013 ands r3, r2 + 8000dc6: d0f0 beq.n 8000daa + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + 8000dc8: 687b ldr r3, [r7, #4] + 8000dca: 689b ldr r3, [r3, #8] + 8000dcc: 2b01 cmp r3, #1 + 8000dce: d10f bne.n 8000df0 + 8000dd0: 4b03 ldr r3, [pc, #12] ; (8000de0 ) + 8000dd2: 6a1a ldr r2, [r3, #32] + 8000dd4: 4b02 ldr r3, [pc, #8] ; (8000de0 ) + 8000dd6: 2101 movs r1, #1 + 8000dd8: 430a orrs r2, r1 + 8000dda: 621a str r2, [r3, #32] + 8000ddc: e036 b.n 8000e4c + 8000dde: 46c0 nop ; (mov r8, r8) + 8000de0: 40021000 .word 0x40021000 + 8000de4: fffeffff .word 0xfffeffff + 8000de8: fffbffff .word 0xfffbffff + 8000dec: 40007000 .word 0x40007000 + 8000df0: 687b ldr r3, [r7, #4] + 8000df2: 689b ldr r3, [r3, #8] + 8000df4: 2b00 cmp r3, #0 + 8000df6: d10c bne.n 8000e12 + 8000df8: 4bb6 ldr r3, [pc, #728] ; (80010d4 ) + 8000dfa: 6a1a ldr r2, [r3, #32] + 8000dfc: 4bb5 ldr r3, [pc, #724] ; (80010d4 ) + 8000dfe: 2101 movs r1, #1 + 8000e00: 438a bics r2, r1 + 8000e02: 621a str r2, [r3, #32] + 8000e04: 4bb3 ldr r3, [pc, #716] ; (80010d4 ) + 8000e06: 6a1a ldr r2, [r3, #32] + 8000e08: 4bb2 ldr r3, [pc, #712] ; (80010d4 ) + 8000e0a: 2104 movs r1, #4 + 8000e0c: 438a bics r2, r1 + 8000e0e: 621a str r2, [r3, #32] + 8000e10: e01c b.n 8000e4c + 8000e12: 687b ldr r3, [r7, #4] + 8000e14: 689b ldr r3, [r3, #8] + 8000e16: 2b05 cmp r3, #5 + 8000e18: d10c bne.n 8000e34 + 8000e1a: 4bae ldr r3, [pc, #696] ; (80010d4 ) + 8000e1c: 6a1a ldr r2, [r3, #32] + 8000e1e: 4bad ldr r3, [pc, #692] ; (80010d4 ) + 8000e20: 2104 movs r1, #4 + 8000e22: 430a orrs r2, r1 + 8000e24: 621a str r2, [r3, #32] + 8000e26: 4bab ldr r3, [pc, #684] ; (80010d4 ) + 8000e28: 6a1a ldr r2, [r3, #32] + 8000e2a: 4baa ldr r3, [pc, #680] ; (80010d4 ) + 8000e2c: 2101 movs r1, #1 + 8000e2e: 430a orrs r2, r1 + 8000e30: 621a str r2, [r3, #32] + 8000e32: e00b b.n 8000e4c + 8000e34: 4ba7 ldr r3, [pc, #668] ; (80010d4 ) + 8000e36: 6a1a ldr r2, [r3, #32] + 8000e38: 4ba6 ldr r3, [pc, #664] ; (80010d4 ) + 8000e3a: 2101 movs r1, #1 + 8000e3c: 438a bics r2, r1 + 8000e3e: 621a str r2, [r3, #32] + 8000e40: 4ba4 ldr r3, [pc, #656] ; (80010d4 ) + 8000e42: 6a1a ldr r2, [r3, #32] + 8000e44: 4ba3 ldr r3, [pc, #652] ; (80010d4 ) + 8000e46: 2104 movs r1, #4 + 8000e48: 438a bics r2, r1 + 8000e4a: 621a str r2, [r3, #32] + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + 8000e4c: 687b ldr r3, [r7, #4] + 8000e4e: 689b ldr r3, [r3, #8] + 8000e50: 2b00 cmp r3, #0 + 8000e52: d014 beq.n 8000e7e + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000e54: f7ff fba2 bl 800059c + 8000e58: 0003 movs r3, r0 + 8000e5a: 61bb str r3, [r7, #24] + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 8000e5c: e009 b.n 8000e72 + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + 8000e5e: f7ff fb9d bl 800059c + 8000e62: 0002 movs r2, r0 + 8000e64: 69bb ldr r3, [r7, #24] + 8000e66: 1ad3 subs r3, r2, r3 + 8000e68: 4a9b ldr r2, [pc, #620] ; (80010d8 ) + 8000e6a: 4293 cmp r3, r2 + 8000e6c: d901 bls.n 8000e72 + { + return HAL_TIMEOUT; + 8000e6e: 2303 movs r3, #3 + 8000e70: e12b b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 8000e72: 4b98 ldr r3, [pc, #608] ; (80010d4 ) + 8000e74: 6a1b ldr r3, [r3, #32] + 8000e76: 2202 movs r2, #2 + 8000e78: 4013 ands r3, r2 + 8000e7a: d0f0 beq.n 8000e5e + 8000e7c: e013 b.n 8000ea6 + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000e7e: f7ff fb8d bl 800059c + 8000e82: 0003 movs r3, r0 + 8000e84: 61bb str r3, [r7, #24] + + /* Wait till LSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + 8000e86: e009 b.n 8000e9c + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + 8000e88: f7ff fb88 bl 800059c + 8000e8c: 0002 movs r2, r0 + 8000e8e: 69bb ldr r3, [r7, #24] + 8000e90: 1ad3 subs r3, r2, r3 + 8000e92: 4a91 ldr r2, [pc, #580] ; (80010d8 ) + 8000e94: 4293 cmp r3, r2 + 8000e96: d901 bls.n 8000e9c + { + return HAL_TIMEOUT; + 8000e98: 2303 movs r3, #3 + 8000e9a: e116 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + 8000e9c: 4b8d ldr r3, [pc, #564] ; (80010d4 ) + 8000e9e: 6a1b ldr r3, [r3, #32] + 8000ea0: 2202 movs r2, #2 + 8000ea2: 4013 ands r3, r2 + 8000ea4: d1f0 bne.n 8000e88 + } + } + } + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + 8000ea6: 231f movs r3, #31 + 8000ea8: 18fb adds r3, r7, r3 + 8000eaa: 781b ldrb r3, [r3, #0] + 8000eac: 2b01 cmp r3, #1 + 8000eae: d105 bne.n 8000ebc + { + __HAL_RCC_PWR_CLK_DISABLE(); + 8000eb0: 4b88 ldr r3, [pc, #544] ; (80010d4 ) + 8000eb2: 69da ldr r2, [r3, #28] + 8000eb4: 4b87 ldr r3, [pc, #540] ; (80010d4 ) + 8000eb6: 4989 ldr r1, [pc, #548] ; (80010dc ) + 8000eb8: 400a ands r2, r1 + 8000eba: 61da str r2, [r3, #28] + } + } + + /*----------------------------- HSI14 Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) + 8000ebc: 687b ldr r3, [r7, #4] + 8000ebe: 681b ldr r3, [r3, #0] + 8000ec0: 2210 movs r2, #16 + 8000ec2: 4013 ands r3, r2 + 8000ec4: d063 beq.n 8000f8e + /* Check the parameters */ + assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue)); + + /* Check the HSI14 State */ + if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON) + 8000ec6: 687b ldr r3, [r7, #4] + 8000ec8: 695b ldr r3, [r3, #20] + 8000eca: 2b01 cmp r3, #1 + 8000ecc: d12a bne.n 8000f24 + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + 8000ece: 4b81 ldr r3, [pc, #516] ; (80010d4 ) + 8000ed0: 6b5a ldr r2, [r3, #52] ; 0x34 + 8000ed2: 4b80 ldr r3, [pc, #512] ; (80010d4 ) + 8000ed4: 2104 movs r1, #4 + 8000ed6: 430a orrs r2, r1 + 8000ed8: 635a str r2, [r3, #52] ; 0x34 + + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_ENABLE(); + 8000eda: 4b7e ldr r3, [pc, #504] ; (80010d4 ) + 8000edc: 6b5a ldr r2, [r3, #52] ; 0x34 + 8000ede: 4b7d ldr r3, [pc, #500] ; (80010d4 ) + 8000ee0: 2101 movs r1, #1 + 8000ee2: 430a orrs r2, r1 + 8000ee4: 635a str r2, [r3, #52] ; 0x34 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000ee6: f7ff fb59 bl 800059c + 8000eea: 0003 movs r3, r0 + 8000eec: 61bb str r3, [r7, #24] + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET) + 8000eee: e008 b.n 8000f02 + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + 8000ef0: f7ff fb54 bl 800059c + 8000ef4: 0002 movs r2, r0 + 8000ef6: 69bb ldr r3, [r7, #24] + 8000ef8: 1ad3 subs r3, r2, r3 + 8000efa: 2b02 cmp r3, #2 + 8000efc: d901 bls.n 8000f02 + { + return HAL_TIMEOUT; + 8000efe: 2303 movs r3, #3 + 8000f00: e0e3 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET) + 8000f02: 4b74 ldr r3, [pc, #464] ; (80010d4 ) + 8000f04: 6b5b ldr r3, [r3, #52] ; 0x34 + 8000f06: 2202 movs r2, #2 + 8000f08: 4013 ands r3, r2 + 8000f0a: d0f1 beq.n 8000ef0 + } + } + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + 8000f0c: 4b71 ldr r3, [pc, #452] ; (80010d4 ) + 8000f0e: 6b5b ldr r3, [r3, #52] ; 0x34 + 8000f10: 22f8 movs r2, #248 ; 0xf8 + 8000f12: 4393 bics r3, r2 + 8000f14: 0019 movs r1, r3 + 8000f16: 687b ldr r3, [r7, #4] + 8000f18: 699b ldr r3, [r3, #24] + 8000f1a: 00da lsls r2, r3, #3 + 8000f1c: 4b6d ldr r3, [pc, #436] ; (80010d4 ) + 8000f1e: 430a orrs r2, r1 + 8000f20: 635a str r2, [r3, #52] ; 0x34 + 8000f22: e034 b.n 8000f8e + } + else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL) + 8000f24: 687b ldr r3, [r7, #4] + 8000f26: 695b ldr r3, [r3, #20] + 8000f28: 3305 adds r3, #5 + 8000f2a: d111 bne.n 8000f50 + { + /* Enable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_ENABLE(); + 8000f2c: 4b69 ldr r3, [pc, #420] ; (80010d4 ) + 8000f2e: 6b5a ldr r2, [r3, #52] ; 0x34 + 8000f30: 4b68 ldr r3, [pc, #416] ; (80010d4 ) + 8000f32: 2104 movs r1, #4 + 8000f34: 438a bics r2, r1 + 8000f36: 635a str r2, [r3, #52] ; 0x34 + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + 8000f38: 4b66 ldr r3, [pc, #408] ; (80010d4 ) + 8000f3a: 6b5b ldr r3, [r3, #52] ; 0x34 + 8000f3c: 22f8 movs r2, #248 ; 0xf8 + 8000f3e: 4393 bics r3, r2 + 8000f40: 0019 movs r1, r3 + 8000f42: 687b ldr r3, [r7, #4] + 8000f44: 699b ldr r3, [r3, #24] + 8000f46: 00da lsls r2, r3, #3 + 8000f48: 4b62 ldr r3, [pc, #392] ; (80010d4 ) + 8000f4a: 430a orrs r2, r1 + 8000f4c: 635a str r2, [r3, #52] ; 0x34 + 8000f4e: e01e b.n 8000f8e + } + else + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + 8000f50: 4b60 ldr r3, [pc, #384] ; (80010d4 ) + 8000f52: 6b5a ldr r2, [r3, #52] ; 0x34 + 8000f54: 4b5f ldr r3, [pc, #380] ; (80010d4 ) + 8000f56: 2104 movs r1, #4 + 8000f58: 430a orrs r2, r1 + 8000f5a: 635a str r2, [r3, #52] ; 0x34 + + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_DISABLE(); + 8000f5c: 4b5d ldr r3, [pc, #372] ; (80010d4 ) + 8000f5e: 6b5a ldr r2, [r3, #52] ; 0x34 + 8000f60: 4b5c ldr r3, [pc, #368] ; (80010d4 ) + 8000f62: 2101 movs r1, #1 + 8000f64: 438a bics r2, r1 + 8000f66: 635a str r2, [r3, #52] ; 0x34 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000f68: f7ff fb18 bl 800059c + 8000f6c: 0003 movs r3, r0 + 8000f6e: 61bb str r3, [r7, #24] + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET) + 8000f70: e008 b.n 8000f84 + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + 8000f72: f7ff fb13 bl 800059c + 8000f76: 0002 movs r2, r0 + 8000f78: 69bb ldr r3, [r7, #24] + 8000f7a: 1ad3 subs r3, r2, r3 + 8000f7c: 2b02 cmp r3, #2 + 8000f7e: d901 bls.n 8000f84 + { + return HAL_TIMEOUT; + 8000f80: 2303 movs r3, #3 + 8000f82: e0a2 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET) + 8000f84: 4b53 ldr r3, [pc, #332] ; (80010d4 ) + 8000f86: 6b5b ldr r3, [r3, #52] ; 0x34 + 8000f88: 2202 movs r2, #2 + 8000f8a: 4013 ands r3, r2 + 8000f8c: d1f1 bne.n 8000f72 +#endif /* RCC_HSI48_SUPPORT */ + + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + 8000f8e: 687b ldr r3, [r7, #4] + 8000f90: 6a1b ldr r3, [r3, #32] + 8000f92: 2b00 cmp r3, #0 + 8000f94: d100 bne.n 8000f98 + 8000f96: e097 b.n 80010c8 + { + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + 8000f98: 4b4e ldr r3, [pc, #312] ; (80010d4 ) + 8000f9a: 685b ldr r3, [r3, #4] + 8000f9c: 220c movs r2, #12 + 8000f9e: 4013 ands r3, r2 + 8000fa0: 2b08 cmp r3, #8 + 8000fa2: d100 bne.n 8000fa6 + 8000fa4: e06b b.n 800107e + { + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + 8000fa6: 687b ldr r3, [r7, #4] + 8000fa8: 6a1b ldr r3, [r3, #32] + 8000faa: 2b02 cmp r3, #2 + 8000fac: d14c bne.n 8001048 + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 8000fae: 4b49 ldr r3, [pc, #292] ; (80010d4 ) + 8000fb0: 681a ldr r2, [r3, #0] + 8000fb2: 4b48 ldr r3, [pc, #288] ; (80010d4 ) + 8000fb4: 494a ldr r1, [pc, #296] ; (80010e0 ) + 8000fb6: 400a ands r2, r1 + 8000fb8: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8000fba: f7ff faef bl 800059c + 8000fbe: 0003 movs r3, r0 + 8000fc0: 61bb str r3, [r7, #24] + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 8000fc2: e008 b.n 8000fd6 + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + 8000fc4: f7ff faea bl 800059c + 8000fc8: 0002 movs r2, r0 + 8000fca: 69bb ldr r3, [r7, #24] + 8000fcc: 1ad3 subs r3, r2, r3 + 8000fce: 2b02 cmp r3, #2 + 8000fd0: d901 bls.n 8000fd6 + { + return HAL_TIMEOUT; + 8000fd2: 2303 movs r3, #3 + 8000fd4: e079 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 8000fd6: 4b3f ldr r3, [pc, #252] ; (80010d4 ) + 8000fd8: 681a ldr r2, [r3, #0] + 8000fda: 2380 movs r3, #128 ; 0x80 + 8000fdc: 049b lsls r3, r3, #18 + 8000fde: 4013 ands r3, r2 + 8000fe0: d1f0 bne.n 8000fc4 + } + } + + /* Configure the main PLL clock source, predivider and multiplication factor. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + 8000fe2: 4b3c ldr r3, [pc, #240] ; (80010d4 ) + 8000fe4: 6adb ldr r3, [r3, #44] ; 0x2c + 8000fe6: 220f movs r2, #15 + 8000fe8: 4393 bics r3, r2 + 8000fea: 0019 movs r1, r3 + 8000fec: 687b ldr r3, [r7, #4] + 8000fee: 6ada ldr r2, [r3, #44] ; 0x2c + 8000ff0: 4b38 ldr r3, [pc, #224] ; (80010d4 ) + 8000ff2: 430a orrs r2, r1 + 8000ff4: 62da str r2, [r3, #44] ; 0x2c + 8000ff6: 4b37 ldr r3, [pc, #220] ; (80010d4 ) + 8000ff8: 685b ldr r3, [r3, #4] + 8000ffa: 4a3a ldr r2, [pc, #232] ; (80010e4 ) + 8000ffc: 4013 ands r3, r2 + 8000ffe: 0019 movs r1, r3 + 8001000: 687b ldr r3, [r7, #4] + 8001002: 6a9a ldr r2, [r3, #40] ; 0x28 + 8001004: 687b ldr r3, [r7, #4] + 8001006: 6a5b ldr r3, [r3, #36] ; 0x24 + 8001008: 431a orrs r2, r3 + 800100a: 4b32 ldr r3, [pc, #200] ; (80010d4 ) + 800100c: 430a orrs r2, r1 + 800100e: 605a str r2, [r3, #4] + RCC_OscInitStruct->PLL.PREDIV, + RCC_OscInitStruct->PLL.PLLMUL); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + 8001010: 4b30 ldr r3, [pc, #192] ; (80010d4 ) + 8001012: 681a ldr r2, [r3, #0] + 8001014: 4b2f ldr r3, [pc, #188] ; (80010d4 ) + 8001016: 2180 movs r1, #128 ; 0x80 + 8001018: 0449 lsls r1, r1, #17 + 800101a: 430a orrs r2, r1 + 800101c: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 800101e: f7ff fabd bl 800059c + 8001022: 0003 movs r3, r0 + 8001024: 61bb str r3, [r7, #24] + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 8001026: e008 b.n 800103a + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + 8001028: f7ff fab8 bl 800059c + 800102c: 0002 movs r2, r0 + 800102e: 69bb ldr r3, [r7, #24] + 8001030: 1ad3 subs r3, r2, r3 + 8001032: 2b02 cmp r3, #2 + 8001034: d901 bls.n 800103a + { + return HAL_TIMEOUT; + 8001036: 2303 movs r3, #3 + 8001038: e047 b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 800103a: 4b26 ldr r3, [pc, #152] ; (80010d4 ) + 800103c: 681a ldr r2, [r3, #0] + 800103e: 2380 movs r3, #128 ; 0x80 + 8001040: 049b lsls r3, r3, #18 + 8001042: 4013 ands r3, r2 + 8001044: d0f0 beq.n 8001028 + 8001046: e03f b.n 80010c8 + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 8001048: 4b22 ldr r3, [pc, #136] ; (80010d4 ) + 800104a: 681a ldr r2, [r3, #0] + 800104c: 4b21 ldr r3, [pc, #132] ; (80010d4 ) + 800104e: 4924 ldr r1, [pc, #144] ; (80010e0 ) + 8001050: 400a ands r2, r1 + 8001052: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001054: f7ff faa2 bl 800059c + 8001058: 0003 movs r3, r0 + 800105a: 61bb str r3, [r7, #24] + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 800105c: e008 b.n 8001070 + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + 800105e: f7ff fa9d bl 800059c + 8001062: 0002 movs r2, r0 + 8001064: 69bb ldr r3, [r7, #24] + 8001066: 1ad3 subs r3, r2, r3 + 8001068: 2b02 cmp r3, #2 + 800106a: d901 bls.n 8001070 + { + return HAL_TIMEOUT; + 800106c: 2303 movs r3, #3 + 800106e: e02c b.n 80010ca + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 8001070: 4b18 ldr r3, [pc, #96] ; (80010d4 ) + 8001072: 681a ldr r2, [r3, #0] + 8001074: 2380 movs r3, #128 ; 0x80 + 8001076: 049b lsls r3, r3, #18 + 8001078: 4013 ands r3, r2 + 800107a: d1f0 bne.n 800105e + 800107c: e024 b.n 80010c8 + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + 800107e: 687b ldr r3, [r7, #4] + 8001080: 6a1b ldr r3, [r3, #32] + 8001082: 2b01 cmp r3, #1 + 8001084: d101 bne.n 800108a + { + return HAL_ERROR; + 8001086: 2301 movs r3, #1 + 8001088: e01f b.n 80010ca + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->CFGR; + 800108a: 4b12 ldr r3, [pc, #72] ; (80010d4 ) + 800108c: 685b ldr r3, [r3, #4] + 800108e: 617b str r3, [r7, #20] + pll_config2 = RCC->CFGR2; + 8001090: 4b10 ldr r3, [pc, #64] ; (80010d4 ) + 8001092: 6adb ldr r3, [r3, #44] ; 0x2c + 8001094: 613b str r3, [r7, #16] + if((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 8001096: 697a ldr r2, [r7, #20] + 8001098: 2380 movs r3, #128 ; 0x80 + 800109a: 025b lsls r3, r3, #9 + 800109c: 401a ands r2, r3 + 800109e: 687b ldr r3, [r7, #4] + 80010a0: 6a5b ldr r3, [r3, #36] ; 0x24 + 80010a2: 429a cmp r2, r3 + 80010a4: d10e bne.n 80010c4 + (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV) || + 80010a6: 693b ldr r3, [r7, #16] + 80010a8: 220f movs r2, #15 + 80010aa: 401a ands r2, r3 + 80010ac: 687b ldr r3, [r7, #4] + 80010ae: 6adb ldr r3, [r3, #44] ; 0x2c + if((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 80010b0: 429a cmp r2, r3 + 80010b2: d107 bne.n 80010c4 + (READ_BIT(pll_config, RCC_CFGR_PLLMUL) != RCC_OscInitStruct->PLL.PLLMUL)) + 80010b4: 697a ldr r2, [r7, #20] + 80010b6: 23f0 movs r3, #240 ; 0xf0 + 80010b8: 039b lsls r3, r3, #14 + 80010ba: 401a ands r2, r3 + 80010bc: 687b ldr r3, [r7, #4] + 80010be: 6a9b ldr r3, [r3, #40] ; 0x28 + (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV) || + 80010c0: 429a cmp r2, r3 + 80010c2: d001 beq.n 80010c8 + { + return HAL_ERROR; + 80010c4: 2301 movs r3, #1 + 80010c6: e000 b.n 80010ca + } + } + } + } + + return HAL_OK; + 80010c8: 2300 movs r3, #0 +} + 80010ca: 0018 movs r0, r3 + 80010cc: 46bd mov sp, r7 + 80010ce: b008 add sp, #32 + 80010d0: bd80 pop {r7, pc} + 80010d2: 46c0 nop ; (mov r8, r8) + 80010d4: 40021000 .word 0x40021000 + 80010d8: 00001388 .word 0x00001388 + 80010dc: efffffff .word 0xefffffff + 80010e0: feffffff .word 0xfeffffff + 80010e4: ffc2ffff .word 0xffc2ffff + +080010e8 : + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + 80010e8: b580 push {r7, lr} + 80010ea: b084 sub sp, #16 + 80010ec: af00 add r7, sp, #0 + 80010ee: 6078 str r0, [r7, #4] + 80010f0: 6039 str r1, [r7, #0] + uint32_t tickstart; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + 80010f2: 687b ldr r3, [r7, #4] + 80010f4: 2b00 cmp r3, #0 + 80010f6: d101 bne.n 80010fc + { + return HAL_ERROR; + 80010f8: 2301 movs r3, #1 + 80010fa: e0b3 b.n 8001264 + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + 80010fc: 4b5b ldr r3, [pc, #364] ; (800126c ) + 80010fe: 681b ldr r3, [r3, #0] + 8001100: 2201 movs r2, #1 + 8001102: 4013 ands r3, r2 + 8001104: 683a ldr r2, [r7, #0] + 8001106: 429a cmp r2, r3 + 8001108: d911 bls.n 800112e + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 800110a: 4b58 ldr r3, [pc, #352] ; (800126c ) + 800110c: 681b ldr r3, [r3, #0] + 800110e: 2201 movs r2, #1 + 8001110: 4393 bics r3, r2 + 8001112: 0019 movs r1, r3 + 8001114: 4b55 ldr r3, [pc, #340] ; (800126c ) + 8001116: 683a ldr r2, [r7, #0] + 8001118: 430a orrs r2, r1 + 800111a: 601a str r2, [r3, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + 800111c: 4b53 ldr r3, [pc, #332] ; (800126c ) + 800111e: 681b ldr r3, [r3, #0] + 8001120: 2201 movs r2, #1 + 8001122: 4013 ands r3, r2 + 8001124: 683a ldr r2, [r7, #0] + 8001126: 429a cmp r2, r3 + 8001128: d001 beq.n 800112e + { + return HAL_ERROR; + 800112a: 2301 movs r3, #1 + 800112c: e09a b.n 8001264 + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + 800112e: 687b ldr r3, [r7, #4] + 8001130: 681b ldr r3, [r3, #0] + 8001132: 2202 movs r2, #2 + 8001134: 4013 ands r3, r2 + 8001136: d015 beq.n 8001164 + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + 8001138: 687b ldr r3, [r7, #4] + 800113a: 681b ldr r3, [r3, #0] + 800113c: 2204 movs r2, #4 + 800113e: 4013 ands r3, r2 + 8001140: d006 beq.n 8001150 + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + 8001142: 4b4b ldr r3, [pc, #300] ; (8001270 ) + 8001144: 685a ldr r2, [r3, #4] + 8001146: 4b4a ldr r3, [pc, #296] ; (8001270 ) + 8001148: 21e0 movs r1, #224 ; 0xe0 + 800114a: 00c9 lsls r1, r1, #3 + 800114c: 430a orrs r2, r1 + 800114e: 605a str r2, [r3, #4] + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + 8001150: 4b47 ldr r3, [pc, #284] ; (8001270 ) + 8001152: 685b ldr r3, [r3, #4] + 8001154: 22f0 movs r2, #240 ; 0xf0 + 8001156: 4393 bics r3, r2 + 8001158: 0019 movs r1, r3 + 800115a: 687b ldr r3, [r7, #4] + 800115c: 689a ldr r2, [r3, #8] + 800115e: 4b44 ldr r3, [pc, #272] ; (8001270 ) + 8001160: 430a orrs r2, r1 + 8001162: 605a str r2, [r3, #4] + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + 8001164: 687b ldr r3, [r7, #4] + 8001166: 681b ldr r3, [r3, #0] + 8001168: 2201 movs r2, #1 + 800116a: 4013 ands r3, r2 + 800116c: d040 beq.n 80011f0 + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + 800116e: 687b ldr r3, [r7, #4] + 8001170: 685b ldr r3, [r3, #4] + 8001172: 2b01 cmp r3, #1 + 8001174: d107 bne.n 8001186 + { + /* Check the HSE ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 8001176: 4b3e ldr r3, [pc, #248] ; (8001270 ) + 8001178: 681a ldr r2, [r3, #0] + 800117a: 2380 movs r3, #128 ; 0x80 + 800117c: 029b lsls r3, r3, #10 + 800117e: 4013 ands r3, r2 + 8001180: d114 bne.n 80011ac + { + return HAL_ERROR; + 8001182: 2301 movs r3, #1 + 8001184: e06e b.n 8001264 + } + } + /* PLL is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + 8001186: 687b ldr r3, [r7, #4] + 8001188: 685b ldr r3, [r3, #4] + 800118a: 2b02 cmp r3, #2 + 800118c: d107 bne.n 800119e + { + /* Check the PLL ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 800118e: 4b38 ldr r3, [pc, #224] ; (8001270 ) + 8001190: 681a ldr r2, [r3, #0] + 8001192: 2380 movs r3, #128 ; 0x80 + 8001194: 049b lsls r3, r3, #18 + 8001196: 4013 ands r3, r2 + 8001198: d108 bne.n 80011ac + { + return HAL_ERROR; + 800119a: 2301 movs r3, #1 + 800119c: e062 b.n 8001264 +#endif /* RCC_CFGR_SWS_HSI48 */ + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 800119e: 4b34 ldr r3, [pc, #208] ; (8001270 ) + 80011a0: 681b ldr r3, [r3, #0] + 80011a2: 2202 movs r2, #2 + 80011a4: 4013 ands r3, r2 + 80011a6: d101 bne.n 80011ac + { + return HAL_ERROR; + 80011a8: 2301 movs r3, #1 + 80011aa: e05b b.n 8001264 + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + 80011ac: 4b30 ldr r3, [pc, #192] ; (8001270 ) + 80011ae: 685b ldr r3, [r3, #4] + 80011b0: 2203 movs r2, #3 + 80011b2: 4393 bics r3, r2 + 80011b4: 0019 movs r1, r3 + 80011b6: 687b ldr r3, [r7, #4] + 80011b8: 685a ldr r2, [r3, #4] + 80011ba: 4b2d ldr r3, [pc, #180] ; (8001270 ) + 80011bc: 430a orrs r2, r1 + 80011be: 605a str r2, [r3, #4] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 80011c0: f7ff f9ec bl 800059c + 80011c4: 0003 movs r3, r0 + 80011c6: 60fb str r3, [r7, #12] + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 80011c8: e009 b.n 80011de + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + 80011ca: f7ff f9e7 bl 800059c + 80011ce: 0002 movs r2, r0 + 80011d0: 68fb ldr r3, [r7, #12] + 80011d2: 1ad3 subs r3, r2, r3 + 80011d4: 4a27 ldr r2, [pc, #156] ; (8001274 ) + 80011d6: 4293 cmp r3, r2 + 80011d8: d901 bls.n 80011de + { + return HAL_TIMEOUT; + 80011da: 2303 movs r3, #3 + 80011dc: e042 b.n 8001264 + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 80011de: 4b24 ldr r3, [pc, #144] ; (8001270 ) + 80011e0: 685b ldr r3, [r3, #4] + 80011e2: 220c movs r2, #12 + 80011e4: 401a ands r2, r3 + 80011e6: 687b ldr r3, [r7, #4] + 80011e8: 685b ldr r3, [r3, #4] + 80011ea: 009b lsls r3, r3, #2 + 80011ec: 429a cmp r2, r3 + 80011ee: d1ec bne.n 80011ca + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + 80011f0: 4b1e ldr r3, [pc, #120] ; (800126c ) + 80011f2: 681b ldr r3, [r3, #0] + 80011f4: 2201 movs r2, #1 + 80011f6: 4013 ands r3, r2 + 80011f8: 683a ldr r2, [r7, #0] + 80011fa: 429a cmp r2, r3 + 80011fc: d211 bcs.n 8001222 + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 80011fe: 4b1b ldr r3, [pc, #108] ; (800126c ) + 8001200: 681b ldr r3, [r3, #0] + 8001202: 2201 movs r2, #1 + 8001204: 4393 bics r3, r2 + 8001206: 0019 movs r1, r3 + 8001208: 4b18 ldr r3, [pc, #96] ; (800126c ) + 800120a: 683a ldr r2, [r7, #0] + 800120c: 430a orrs r2, r1 + 800120e: 601a str r2, [r3, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + 8001210: 4b16 ldr r3, [pc, #88] ; (800126c ) + 8001212: 681b ldr r3, [r3, #0] + 8001214: 2201 movs r2, #1 + 8001216: 4013 ands r3, r2 + 8001218: 683a ldr r2, [r7, #0] + 800121a: 429a cmp r2, r3 + 800121c: d001 beq.n 8001222 + { + return HAL_ERROR; + 800121e: 2301 movs r3, #1 + 8001220: e020 b.n 8001264 + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + 8001222: 687b ldr r3, [r7, #4] + 8001224: 681b ldr r3, [r3, #0] + 8001226: 2204 movs r2, #4 + 8001228: 4013 ands r3, r2 + 800122a: d009 beq.n 8001240 + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + 800122c: 4b10 ldr r3, [pc, #64] ; (8001270 ) + 800122e: 685b ldr r3, [r3, #4] + 8001230: 4a11 ldr r2, [pc, #68] ; (8001278 ) + 8001232: 4013 ands r3, r2 + 8001234: 0019 movs r1, r3 + 8001236: 687b ldr r3, [r7, #4] + 8001238: 68da ldr r2, [r3, #12] + 800123a: 4b0d ldr r3, [pc, #52] ; (8001270 ) + 800123c: 430a orrs r2, r1 + 800123e: 605a str r2, [r3, #4] + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER]; + 8001240: f000 f820 bl 8001284 + 8001244: 0001 movs r1, r0 + 8001246: 4b0a ldr r3, [pc, #40] ; (8001270 ) + 8001248: 685b ldr r3, [r3, #4] + 800124a: 091b lsrs r3, r3, #4 + 800124c: 220f movs r2, #15 + 800124e: 4013 ands r3, r2 + 8001250: 4a0a ldr r2, [pc, #40] ; (800127c ) + 8001252: 5cd3 ldrb r3, [r2, r3] + 8001254: 000a movs r2, r1 + 8001256: 40da lsrs r2, r3 + 8001258: 4b09 ldr r3, [pc, #36] ; (8001280 ) + 800125a: 601a str r2, [r3, #0] + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick (TICK_INT_PRIORITY); + 800125c: 2000 movs r0, #0 + 800125e: f7ff f957 bl 8000510 + + return HAL_OK; + 8001262: 2300 movs r3, #0 +} + 8001264: 0018 movs r0, r3 + 8001266: 46bd mov sp, r7 + 8001268: b004 add sp, #16 + 800126a: bd80 pop {r7, pc} + 800126c: 40022000 .word 0x40022000 + 8001270: 40021000 .word 0x40021000 + 8001274: 00001388 .word 0x00001388 + 8001278: fffff8ff .word 0xfffff8ff + 800127c: 080013dc .word 0x080013dc + 8001280: 20000000 .word 0x20000000 + +08001284 : + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + 8001284: b590 push {r4, r7, lr} + 8001286: b08f sub sp, #60 ; 0x3c + 8001288: af00 add r7, sp, #0 + const uint8_t aPLLMULFactorTable[16] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U, + 800128a: 2314 movs r3, #20 + 800128c: 18fb adds r3, r7, r3 + 800128e: 4a2b ldr r2, [pc, #172] ; (800133c ) + 8001290: ca13 ldmia r2!, {r0, r1, r4} + 8001292: c313 stmia r3!, {r0, r1, r4} + 8001294: 6812 ldr r2, [r2, #0] + 8001296: 601a str r2, [r3, #0] + 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U}; + const uint8_t aPredivFactorTable[16] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U, + 8001298: 1d3b adds r3, r7, #4 + 800129a: 4a29 ldr r2, [pc, #164] ; (8001340 ) + 800129c: ca13 ldmia r2!, {r0, r1, r4} + 800129e: c313 stmia r3!, {r0, r1, r4} + 80012a0: 6812 ldr r2, [r2, #0] + 80012a2: 601a str r2, [r3, #0] + 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U}; + + uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; + 80012a4: 2300 movs r3, #0 + 80012a6: 62fb str r3, [r7, #44] ; 0x2c + 80012a8: 2300 movs r3, #0 + 80012aa: 62bb str r3, [r7, #40] ; 0x28 + 80012ac: 2300 movs r3, #0 + 80012ae: 637b str r3, [r7, #52] ; 0x34 + 80012b0: 2300 movs r3, #0 + 80012b2: 627b str r3, [r7, #36] ; 0x24 + uint32_t sysclockfreq = 0U; + 80012b4: 2300 movs r3, #0 + 80012b6: 633b str r3, [r7, #48] ; 0x30 + + tmpreg = RCC->CFGR; + 80012b8: 4b22 ldr r3, [pc, #136] ; (8001344 ) + 80012ba: 685b ldr r3, [r3, #4] + 80012bc: 62fb str r3, [r7, #44] ; 0x2c + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + 80012be: 6afb ldr r3, [r7, #44] ; 0x2c + 80012c0: 220c movs r2, #12 + 80012c2: 4013 ands r3, r2 + 80012c4: 2b04 cmp r3, #4 + 80012c6: d002 beq.n 80012ce + 80012c8: 2b08 cmp r3, #8 + 80012ca: d003 beq.n 80012d4 + 80012cc: e02d b.n 800132a + { + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + 80012ce: 4b1e ldr r3, [pc, #120] ; (8001348 ) + 80012d0: 633b str r3, [r7, #48] ; 0x30 + break; + 80012d2: e02d b.n 8001330 + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER]; + 80012d4: 6afb ldr r3, [r7, #44] ; 0x2c + 80012d6: 0c9b lsrs r3, r3, #18 + 80012d8: 220f movs r2, #15 + 80012da: 4013 ands r3, r2 + 80012dc: 2214 movs r2, #20 + 80012de: 18ba adds r2, r7, r2 + 80012e0: 5cd3 ldrb r3, [r2, r3] + 80012e2: 627b str r3, [r7, #36] ; 0x24 + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER]; + 80012e4: 4b17 ldr r3, [pc, #92] ; (8001344 ) + 80012e6: 6adb ldr r3, [r3, #44] ; 0x2c + 80012e8: 220f movs r2, #15 + 80012ea: 4013 ands r3, r2 + 80012ec: 1d3a adds r2, r7, #4 + 80012ee: 5cd3 ldrb r3, [r2, r3] + 80012f0: 62bb str r3, [r7, #40] ; 0x28 + if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + 80012f2: 6afa ldr r2, [r7, #44] ; 0x2c + 80012f4: 2380 movs r3, #128 ; 0x80 + 80012f6: 025b lsls r3, r3, #9 + 80012f8: 4013 ands r3, r2 + 80012fa: d009 beq.n 8001310 + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSE_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); + 80012fc: 6ab9 ldr r1, [r7, #40] ; 0x28 + 80012fe: 4812 ldr r0, [pc, #72] ; (8001348 ) + 8001300: f7fe ff02 bl 8000108 <__udivsi3> + 8001304: 0003 movs r3, r0 + 8001306: 001a movs r2, r3 + 8001308: 6a7b ldr r3, [r7, #36] ; 0x24 + 800130a: 4353 muls r3, r2 + 800130c: 637b str r3, [r7, #52] ; 0x34 + 800130e: e009 b.n 8001324 +#if (defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)) + /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSI_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); +#else + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((uint64_t) (HSI_VALUE >> 1U) * ((uint64_t) pllmul)); + 8001310: 6a79 ldr r1, [r7, #36] ; 0x24 + 8001312: 000a movs r2, r1 + 8001314: 0152 lsls r2, r2, #5 + 8001316: 1a52 subs r2, r2, r1 + 8001318: 0193 lsls r3, r2, #6 + 800131a: 1a9b subs r3, r3, r2 + 800131c: 00db lsls r3, r3, #3 + 800131e: 185b adds r3, r3, r1 + 8001320: 021b lsls r3, r3, #8 + 8001322: 637b str r3, [r7, #52] ; 0x34 +#endif + } + sysclockfreq = pllclk; + 8001324: 6b7b ldr r3, [r7, #52] ; 0x34 + 8001326: 633b str r3, [r7, #48] ; 0x30 + break; + 8001328: e002 b.n 8001330 + } +#endif /* RCC_CFGR_SWS_HSI48 */ + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: /* HSI used as system clock */ + { + sysclockfreq = HSI_VALUE; + 800132a: 4b07 ldr r3, [pc, #28] ; (8001348 ) + 800132c: 633b str r3, [r7, #48] ; 0x30 + break; + 800132e: 46c0 nop ; (mov r8, r8) + } + } + return sysclockfreq; + 8001330: 6b3b ldr r3, [r7, #48] ; 0x30 +} + 8001332: 0018 movs r0, r3 + 8001334: 46bd mov sp, r7 + 8001336: b00f add sp, #60 ; 0x3c + 8001338: bd90 pop {r4, r7, pc} + 800133a: 46c0 nop ; (mov r8, r8) + 800133c: 080013bc .word 0x080013bc + 8001340: 080013cc .word 0x080013cc + 8001344: 40021000 .word 0x40021000 + 8001348: 007a1200 .word 0x007a1200 + +0800134c <__libc_init_array>: + 800134c: b570 push {r4, r5, r6, lr} + 800134e: 2600 movs r6, #0 + 8001350: 4d0c ldr r5, [pc, #48] ; (8001384 <__libc_init_array+0x38>) + 8001352: 4c0d ldr r4, [pc, #52] ; (8001388 <__libc_init_array+0x3c>) + 8001354: 1b64 subs r4, r4, r5 + 8001356: 10a4 asrs r4, r4, #2 + 8001358: 42a6 cmp r6, r4 + 800135a: d109 bne.n 8001370 <__libc_init_array+0x24> + 800135c: 2600 movs r6, #0 + 800135e: f000 f821 bl 80013a4 <_init> + 8001362: 4d0a ldr r5, [pc, #40] ; (800138c <__libc_init_array+0x40>) + 8001364: 4c0a ldr r4, [pc, #40] ; (8001390 <__libc_init_array+0x44>) + 8001366: 1b64 subs r4, r4, r5 + 8001368: 10a4 asrs r4, r4, #2 + 800136a: 42a6 cmp r6, r4 + 800136c: d105 bne.n 800137a <__libc_init_array+0x2e> + 800136e: bd70 pop {r4, r5, r6, pc} + 8001370: 00b3 lsls r3, r6, #2 + 8001372: 58eb ldr r3, [r5, r3] + 8001374: 4798 blx r3 + 8001376: 3601 adds r6, #1 + 8001378: e7ee b.n 8001358 <__libc_init_array+0xc> + 800137a: 00b3 lsls r3, r6, #2 + 800137c: 58eb ldr r3, [r5, r3] + 800137e: 4798 blx r3 + 8001380: 3601 adds r6, #1 + 8001382: e7f2 b.n 800136a <__libc_init_array+0x1e> + 8001384: 080013ec .word 0x080013ec + 8001388: 080013ec .word 0x080013ec + 800138c: 080013ec .word 0x080013ec + 8001390: 080013f0 .word 0x080013f0 + +08001394 : + 8001394: 0003 movs r3, r0 + 8001396: 1812 adds r2, r2, r0 + 8001398: 4293 cmp r3, r2 + 800139a: d100 bne.n 800139e + 800139c: 4770 bx lr + 800139e: 7019 strb r1, [r3, #0] + 80013a0: 3301 adds r3, #1 + 80013a2: e7f9 b.n 8001398 + +080013a4 <_init>: + 80013a4: b5f8 push {r3, r4, r5, r6, r7, lr} + 80013a6: 46c0 nop ; (mov r8, r8) + 80013a8: bcf8 pop {r3, r4, r5, r6, r7} + 80013aa: bc08 pop {r3} + 80013ac: 469e mov lr, r3 + 80013ae: 4770 bx lr + +080013b0 <_fini>: + 80013b0: b5f8 push {r3, r4, r5, r6, r7, lr} + 80013b2: 46c0 nop ; (mov r8, r8) + 80013b4: bcf8 pop {r3, r4, r5, r6, r7} + 80013b6: bc08 pop {r3} + 80013b8: 469e mov lr, r3 + 80013ba: 4770 bx lr diff --git a/LED/Debug/LED.map b/LED/Debug/LED.map new file mode 100644 index 0000000..72ae601 --- /dev/null +++ b/LED/Debug/LED.map @@ -0,0 +1,2701 @@ +Archive member included to satisfy reference by file (symbol) + +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + Core/Src/syscalls.o (__errno) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (exit) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) (_global_impure_ptr) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (__libc_init_array) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (memset) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + Core/Src/system_stm32f0xx.o (__aeabi_uidiv) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) (__aeabi_idiv0) + +Allocating common symbols +Common symbol size file + +uwTick 0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o +pFlash 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + +Discarded input sections + + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .data 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + .text 0x0000000000000000 0x78 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .ARM.extab 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .ARM.exidx 0x0000000000000000 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .ARM.attributes + 0x0000000000000000 0x1b /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .text 0x0000000000000000 0x0 Core/Src/main.o + .data 0x0000000000000000 0x0 Core/Src/main.o + .bss 0x0000000000000000 0x0 Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .text 0x0000000000000000 0x0 Core/Src/stm32f0xx_hal_msp.o + .data 0x0000000000000000 0x0 Core/Src/stm32f0xx_hal_msp.o + .bss 0x0000000000000000 0x0 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x127 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x2e Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x8e Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x51 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xef Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x6a Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1df Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xb5 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x391 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x6e60 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x3c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x3461 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x174 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x55 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x924 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xe5 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x12f Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xb3 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1a0 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1ed Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x34 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x43 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x28 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xb0 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x15a Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x60 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xa5 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x4c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x2b Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xf1 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x58 Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .text 0x0000000000000000 0x0 Core/Src/stm32f0xx_it.o + .data 0x0000000000000000 0x0 Core/Src/stm32f0xx_it.o + .bss 0x0000000000000000 0x0 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x127 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x2e Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x8e Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x51 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xef Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x6a Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1df Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xb5 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x391 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x6e60 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x3c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x3461 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x174 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x55 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x924 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xe5 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x12f Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xb3 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1a0 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1ed Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x34 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x43 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x28 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xb0 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x15a Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x60 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xa5 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x4c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x2b Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xf1 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x58 Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .text 0x0000000000000000 0x0 Core/Src/syscalls.o + .data 0x0000000000000000 0x0 Core/Src/syscalls.o + .bss 0x0000000000000000 0x0 Core/Src/syscalls.o + .bss.__env 0x0000000000000000 0x4 Core/Src/syscalls.o + .data.environ 0x0000000000000000 0x4 Core/Src/syscalls.o + .text.initialise_monitor_handles + 0x0000000000000000 0xa Core/Src/syscalls.o + .text._getpid 0x0000000000000000 0xc Core/Src/syscalls.o + .text._kill 0x0000000000000000 0x20 Core/Src/syscalls.o + .text._exit 0x0000000000000000 0x18 Core/Src/syscalls.o + .text._read 0x0000000000000000 0x3a Core/Src/syscalls.o + .text._write 0x0000000000000000 0x38 Core/Src/syscalls.o + .text._close 0x0000000000000000 0x14 Core/Src/syscalls.o + .text._fstat 0x0000000000000000 0x1c Core/Src/syscalls.o + .text._isatty 0x0000000000000000 0x12 Core/Src/syscalls.o + .text._lseek 0x0000000000000000 0x16 Core/Src/syscalls.o + .text._open 0x0000000000000000 0x1c Core/Src/syscalls.o + .text._wait 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._unlink 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._times 0x0000000000000000 0x14 Core/Src/syscalls.o + .text._stat 0x0000000000000000 0x1c Core/Src/syscalls.o + .text._link 0x0000000000000000 0x20 Core/Src/syscalls.o + .text._fork 0x0000000000000000 0x18 Core/Src/syscalls.o + .text._execve 0x0000000000000000 0x22 Core/Src/syscalls.o + .debug_info 0x0000000000000000 0xebd Core/Src/syscalls.o + .debug_abbrev 0x0000000000000000 0x261 Core/Src/syscalls.o + .debug_aranges + 0x0000000000000000 0xa8 Core/Src/syscalls.o + .debug_ranges 0x0000000000000000 0x98 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x243 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x22 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x18 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x94 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x3c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x34 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x57 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x174 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x330 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x52 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1f Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x43 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x20 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1a3 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x35 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x6a Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x52 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0xd7 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x3d Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x35 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x122 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x29 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x241 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x145 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x189 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x88 Core/Src/syscalls.o + .debug_line 0x0000000000000000 0x711 Core/Src/syscalls.o + .debug_str 0x0000000000000000 0x87e3 Core/Src/syscalls.o + .comment 0x0000000000000000 0x7c Core/Src/syscalls.o + .debug_frame 0x0000000000000000 0x244 Core/Src/syscalls.o + .ARM.attributes + 0x0000000000000000 0x31 Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .text 0x0000000000000000 0x0 Core/Src/sysmem.o + .data 0x0000000000000000 0x0 Core/Src/sysmem.o + .bss 0x0000000000000000 0x0 Core/Src/sysmem.o + .bss.__sbrk_heap_end + 0x0000000000000000 0x4 Core/Src/sysmem.o + .text._sbrk 0x0000000000000000 0x6c Core/Src/sysmem.o + .debug_info 0x0000000000000000 0x985 Core/Src/sysmem.o + .debug_abbrev 0x0000000000000000 0x19b Core/Src/sysmem.o + .debug_aranges + 0x0000000000000000 0x20 Core/Src/sysmem.o + .debug_ranges 0x0000000000000000 0x10 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xee Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x10 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x22 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x40 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x18 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x94 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x3c Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x34 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x174 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x57 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x52 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1f Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x43 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x20 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1a3 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x23b Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xef Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x6a Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1df Core/Src/sysmem.o + .debug_line 0x0000000000000000 0x49a Core/Src/sysmem.o + .debug_str 0x0000000000000000 0x5eb1 Core/Src/sysmem.o + .comment 0x0000000000000000 0x7c Core/Src/sysmem.o + .debug_frame 0x0000000000000000 0x30 Core/Src/sysmem.o + .ARM.attributes + 0x0000000000000000 0x31 Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .text 0x0000000000000000 0x0 Core/Src/system_stm32f0xx.o + .data 0x0000000000000000 0x0 Core/Src/system_stm32f0xx.o + .bss 0x0000000000000000 0x0 Core/Src/system_stm32f0xx.o + .rodata.APBPrescTable + 0x0000000000000000 0x8 Core/Src/system_stm32f0xx.o + .text.SystemCoreClockUpdate + 0x0000000000000000 0xe0 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x2e Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x8e Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x51 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xef Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x6a Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1df Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xb5 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x391 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x6e60 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x3c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x127 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x3461 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x174 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x55 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x924 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xe5 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x12f Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xb3 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1a0 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1ed Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x34 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x43 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x28 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xb0 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x15a Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x60 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xa5 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x4c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x2b Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xf1 Core/Src/system_stm32f0xx.o + .text 0x0000000000000000 0x14 Core/Startup/startup_stm32f030f4px.o + .data 0x0000000000000000 0x0 Core/Startup/startup_stm32f030f4px.o + .bss 0x0000000000000000 0x0 Core/Startup/startup_stm32f030f4px.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DeInit + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_MspInit + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_MspDeInit + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetTickPrio + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_SetTickFreq + 0x0000000000000000 0x6c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetTickFreq + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_SuspendTick + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_ResumeTick + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetHalVersion + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetREVID + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetDEVID + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetUIDw0 + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetUIDw1 + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetUIDw2 + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_EnableDBGStopMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_DisableDBGStopMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_EnableDBGStandbyMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_DisableDBGStandbyMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_EnableIRQ + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_DisableIRQ + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_GetPendingIRQ + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_SetPendingIRQ + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_ClearPendingIRQ + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_GetPriority + 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_SystemReset + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_EnableIRQ + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_DisableIRQ + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_SystemReset + 0x0000000000000000 0x8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_GetPriority + 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_SetPendingIRQ + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_GetPendingIRQ + 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_ClearPendingIRQ + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_SYSTICK_CLKSourceConfig + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_SYSTICK_IRQHandler + 0x0000000000000000 0xe Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_SYSTICK_Callback + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Init + 0x0000000000000000 0x90 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_DeInit + 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Start + 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Start_IT + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Abort + 0x0000000000000000 0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Abort_IT + 0x0000000000000000 0x8c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_PollForTransfer + 0x0000000000000000 0x132 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_IRQHandler + 0x0000000000000000 0x144 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_RegisterCallback + 0x0000000000000000 0xa2 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_UnRegisterCallback + 0x0000000000000000 0xb4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .rodata.HAL_DMA_UnRegisterCallback + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_GetState + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_GetError + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.DMA_SetConfig + 0x0000000000000000 0x58 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.DMA_CalcBaseAndBitshift + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_info 0x0000000000000000 0x79f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_abbrev 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_aranges + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_ranges 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_line 0x0000000000000000 0x869 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_str 0x0000000000000000 0x524a4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_frame 0x0000000000000000 0x1d0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_SetConfigLine + 0x0000000000000000 0x148 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GetConfigLine + 0x0000000000000000 0xfc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_ClearConfigLine + 0x0000000000000000 0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_RegisterCallback + 0x0000000000000000 0x42 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GetHandle + 0x0000000000000000 0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_IRQHandler + 0x0000000000000000 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GetPending + 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_ClearPending + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GenerateSWI + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_info 0x0000000000000000 0x59a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_abbrev 0x0000000000000000 0x193 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_aranges + 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_ranges 0x0000000000000000 0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_line 0x0000000000000000 0x752 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_str 0x0000000000000000 0x5226e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_frame 0x0000000000000000 0x130 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Program + 0x0000000000000000 0x12c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Program_IT + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_IRQHandler + 0x0000000000000000 0x1d0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_EndOfOperationCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OperationErrorCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Unlock + 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Lock + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OB_Unlock + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OB_Lock + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OB_Launch + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_GetError + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.FLASH_Program_HalfWord + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.FLASH_WaitForLastOperation + 0x0000000000000000 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.FLASH_SetErrorCode + 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_info 0x0000000000000000 0x574 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_abbrev 0x0000000000000000 0x205 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_aranges + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_ranges 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_line 0x0000000000000000 0x815 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_str 0x0000000000000000 0x52387 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_frame 0x0000000000000000 0x1c4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + COMMON 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase + 0x0000000000000000 0xec Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase_IT + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBErase + 0x0000000000000000 0x9c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBProgram + 0x0000000000000000 0x128 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBGetConfig + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBGetUserData + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_MassErase + 0x0000000000000000 0x30 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_EnableWRP + 0x0000000000000000 0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_DisableWRP + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_RDP_LevelConfig + 0x0000000000000000 0xbc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_UserConfig + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_ProgramData + 0x0000000000000000 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_GetWRP + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_GetRDP + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_GetUser + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_PageErase + 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_info 0x0000000000000000 0x732 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_abbrev 0x0000000000000000 0x1f0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_aranges + 0x0000000000000000 0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_ranges 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1ab Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_line 0x0000000000000000 0x853 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_str 0x0000000000000000 0x524da Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_frame 0x0000000000000000 0x220 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_DeInit + 0x0000000000000000 0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_TogglePin + 0x0000000000000000 0x36 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_LockPin + 0x0000000000000000 0x52 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_EXTI_IRQHandler + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_EXTI_Callback + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Init + 0x0000000000000000 0x12c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_DeInit + 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MspInit + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MspDeInit + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit + 0x0000000000000000 0x210 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Receive + 0x0000000000000000 0x210 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit + 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive + 0x0000000000000000 0x214 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit_IT + 0x0000000000000000 0xf8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Receive_IT + 0x0000000000000000 0xf8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit_IT + 0x0000000000000000 0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive_IT + 0x0000000000000000 0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit_DMA + 0x0000000000000000 0x20c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Receive_DMA + 0x0000000000000000 0x20c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit_DMA + 0x0000000000000000 0x180 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive_DMA + 0x0000000000000000 0x180 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Write + 0x0000000000000000 0x25c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Read + 0x0000000000000000 0x268 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Write_IT + 0x0000000000000000 0x150 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Read_IT + 0x0000000000000000 0x154 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Write_DMA + 0x0000000000000000 0x21c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Read_DMA + 0x0000000000000000 0x220 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_IsDeviceReady + 0x0000000000000000 0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Transmit_IT + 0x0000000000000000 0x124 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Transmit_DMA + 0x0000000000000000 0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Receive_IT + 0x0000000000000000 0x124 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Receive_DMA + 0x0000000000000000 0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Transmit_IT + 0x0000000000000000 0x160 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Transmit_DMA + 0x0000000000000000 0x298 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Receive_IT + 0x0000000000000000 0x164 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Receive_DMA + 0x0000000000000000 0x294 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_EnableListen_IT + 0x0000000000000000 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_DisableListen_IT + 0x0000000000000000 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Abort_IT + 0x0000000000000000 0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_EV_IRQHandler + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_ER_IRQHandler + 0x0000000000000000 0xc4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MasterTxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MasterRxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_SlaveTxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_SlaveRxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_AddrCallback + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_ListenCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MemTxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MemRxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_ErrorCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_AbortCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_GetState + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_GetMode + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_GetError + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Master_ISR_IT + 0x0000000000000000 0x288 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Slave_ISR_IT + 0x0000000000000000 0x228 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Master_ISR_DMA + 0x0000000000000000 0x218 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Slave_ISR_DMA + 0x0000000000000000 0x1f0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_RequestMemoryWrite + 0x0000000000000000 0xc8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_RequestMemoryRead + 0x0000000000000000 0xc4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITAddrCplt + 0x0000000000000000 0x152 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITMasterSeqCplt + 0x0000000000000000 0x82 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITSlaveSeqCplt + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITMasterCplt + 0x0000000000000000 0x1a4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITSlaveCplt + 0x0000000000000000 0x24c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITListenCplt + 0x0000000000000000 0xb4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITError + 0x0000000000000000 0x1c8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_TreatErrorCallback + 0x0000000000000000 0x52 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Flush_TXDR + 0x0000000000000000 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAMasterTransmitCplt + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMASlaveTransmitCplt + 0x0000000000000000 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAMasterReceiveCplt + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMASlaveReceiveCplt + 0x0000000000000000 0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAError + 0x0000000000000000 0x32 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAAbort + 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnFlagUntilTimeout + 0x0000000000000000 0x7e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnTXISFlagUntilTimeout + 0x0000000000000000 0x7e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnSTOPFlagUntilTimeout + 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnRXNEFlagUntilTimeout + 0x0000000000000000 0xd8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_IsAcknowledgeFailed + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_TransferConfig + 0x0000000000000000 0x6c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Enable_IRQ + 0x0000000000000000 0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Disable_IRQ + 0x0000000000000000 0xc6 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ConvertOtherXferOptions + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_info 0x0000000000000000 0x1fb9 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_abbrev 0x0000000000000000 0x239 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_aranges + 0x0000000000000000 0x290 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_ranges 0x0000000000000000 0x280 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x25e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_line 0x0000000000000000 0x1a45 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_str 0x0000000000000000 0x5337e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_frame 0x0000000000000000 0xa20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_ConfigAnalogFilter + 0x0000000000000000 0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_ConfigDigitalFilter + 0x0000000000000000 0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_EnableFastModePlus + 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_DisableFastModePlus + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_info 0x0000000000000000 0x869 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_abbrev 0x0000000000000000 0x1c8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_aranges + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_ranges 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_line 0x0000000000000000 0x713 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_str 0x0000000000000000 0x5263b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_frame 0x0000000000000000 0x90 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DeInit + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableBkUpAccess + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableBkUpAccess + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableWakeUpPin + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableWakeUpPin + 0x0000000000000000 0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnterSLEEPMode + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnterSTOPMode + 0x0000000000000000 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnterSTANDBYMode + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableSleepOnExit + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableSleepOnExit + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableSEVOnPend + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableSEVOnPend + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_info 0x0000000000000000 0x43a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_abbrev 0x0000000000000000 0x15f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_aranges + 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_ranges 0x0000000000000000 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_line 0x0000000000000000 0x73e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_str 0x0000000000000000 0x52235 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_frame 0x0000000000000000 0x170 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_info 0x0000000000000000 0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1b1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_line 0x0000000000000000 0x653 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_str 0x0000000000000000 0x520c7 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_DeInit + 0x0000000000000000 0x10c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_MCOConfig + 0x0000000000000000 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_EnableCSS + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_DisableCSS + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_GetHCLKFreq + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_GetPCLK1Freq + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_GetOscConfig + 0x0000000000000000 0x134 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_GetClockConfig + 0x0000000000000000 0x54 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_NMI_IRQHandler + 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_CSSCallback + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .text.HAL_RCCEx_PeriphCLKConfig + 0x0000000000000000 0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKConfig + 0x0000000000000000 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKFreq + 0x0000000000000000 0x144 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_info 0x0000000000000000 0x3cb Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_abbrev 0x0000000000000000 0x175 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_aranges + 0x0000000000000000 0x30 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_ranges 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_line 0x0000000000000000 0x726 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_str 0x0000000000000000 0x52208 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_frame 0x0000000000000000 0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_info 0x0000000000000000 0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x19a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_line 0x0000000000000000 0x650 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_str 0x0000000000000000 0x52052 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_info 0x0000000000000000 0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_line 0x0000000000000000 0x653 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_str 0x0000000000000000 0x52055 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .text.__errno 0x0000000000000000 0xc /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .debug_frame 0x0000000000000000 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .ARM.attributes + 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .text.exit 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .debug_frame 0x0000000000000000 0x28 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .ARM.attributes + 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .data._impure_ptr + 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .data.impure_data + 0x0000000000000000 0x60 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .rodata._global_impure_ptr + 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .ARM.attributes + 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .eh_frame 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .ARM.attributes + 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + +Memory Configuration + +Name Origin Length Attributes +RAM 0x0000000020000000 0x0000000000001000 xrw +FLASH 0x0000000008000000 0x0000000000004000 xr +*default* 0x0000000000000000 0xffffffffffffffff + +Linker script and memory map + +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o +LOAD Core/Src/main.o +LOAD Core/Src/stm32f0xx_hal_msp.o +LOAD Core/Src/stm32f0xx_it.o +LOAD Core/Src/syscalls.o +LOAD Core/Src/sysmem.o +LOAD Core/Src/system_stm32f0xx.o +LOAD Core/Startup/startup_stm32f030f4px.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libstdc++_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libsupc++_nano.a +END GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libstdc++_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libm.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +END GROUP +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libnosys.a +END GROUP +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libnosys.a +END GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + 0x0000000020001000 _estack = (ORIGIN (RAM) + LENGTH (RAM)) + 0x0000000000000200 _Min_Heap_Size = 0x200 + 0x0000000000000400 _Min_Stack_Size = 0x400 + +.isr_vector 0x0000000008000000 0xc0 + 0x0000000008000000 . = ALIGN (0x4) + *(.isr_vector) + .isr_vector 0x0000000008000000 0xc0 Core/Startup/startup_stm32f030f4px.o + 0x0000000008000000 g_pfnVectors + 0x00000000080000c0 . = ALIGN (0x4) + +.text 0x00000000080000c0 0x12fc + 0x00000000080000c0 . = ALIGN (0x4) + *(.text) + .text 0x00000000080000c0 0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + .text 0x0000000008000108 0x114 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + 0x0000000008000108 __udivsi3 + 0x0000000008000108 __aeabi_uidiv + 0x0000000008000214 __aeabi_uidivmod + .text 0x000000000800021c 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + 0x000000000800021c __aeabi_ldiv0 + 0x000000000800021c __aeabi_idiv0 + *(.text*) + .text.main 0x0000000008000220 0x38 Core/Src/main.o + 0x0000000008000220 main + .text.SystemClock_Config + 0x0000000008000258 0x80 Core/Src/main.o + 0x0000000008000258 SystemClock_Config + .text.MX_GPIO_Init + 0x00000000080002d8 0x134 Core/Src/main.o + .text.Error_Handler + 0x000000000800040c 0x8 Core/Src/main.o + 0x000000000800040c Error_Handler + .text.HAL_MspInit + 0x0000000008000414 0x48 Core/Src/stm32f0xx_hal_msp.o + 0x0000000008000414 HAL_MspInit + .text.NMI_Handler + 0x000000000800045c 0x6 Core/Src/stm32f0xx_it.o + 0x000000000800045c NMI_Handler + .text.HardFault_Handler + 0x0000000008000462 0x6 Core/Src/stm32f0xx_it.o + 0x0000000008000462 HardFault_Handler + .text.SVC_Handler + 0x0000000008000468 0xa Core/Src/stm32f0xx_it.o + 0x0000000008000468 SVC_Handler + .text.PendSV_Handler + 0x0000000008000472 0xa Core/Src/stm32f0xx_it.o + 0x0000000008000472 PendSV_Handler + .text.SysTick_Handler + 0x000000000800047c 0xe Core/Src/stm32f0xx_it.o + 0x000000000800047c SysTick_Handler + .text.SystemInit + 0x000000000800048a 0xa Core/Src/system_stm32f0xx.o + 0x000000000800048a SystemInit + .text.Reset_Handler + 0x0000000008000494 0x50 Core/Startup/startup_stm32f030f4px.o + 0x0000000008000494 Reset_Handler + .text.Default_Handler + 0x00000000080004e4 0x2 Core/Startup/startup_stm32f030f4px.o + 0x00000000080004e4 TIM1_CC_IRQHandler + 0x00000000080004e4 I2C1_IRQHandler + 0x00000000080004e4 SPI1_IRQHandler + 0x00000000080004e4 EXTI2_3_IRQHandler + 0x00000000080004e4 ADC1_IRQHandler + 0x00000000080004e4 TIM17_IRQHandler + 0x00000000080004e4 RTC_IRQHandler + 0x00000000080004e4 TIM16_IRQHandler + 0x00000000080004e4 TIM3_IRQHandler + 0x00000000080004e4 EXTI4_15_IRQHandler + 0x00000000080004e4 RCC_IRQHandler + 0x00000000080004e4 DMA1_Channel1_IRQHandler + 0x00000000080004e4 Default_Handler + 0x00000000080004e4 TIM14_IRQHandler + 0x00000000080004e4 DMA1_Channel4_5_IRQHandler + 0x00000000080004e4 EXTI0_1_IRQHandler + 0x00000000080004e4 WWDG_IRQHandler + 0x00000000080004e4 DMA1_Channel2_3_IRQHandler + 0x00000000080004e4 FLASH_IRQHandler + 0x00000000080004e4 USART1_IRQHandler + 0x00000000080004e4 TIM1_BRK_UP_TRG_COM_IRQHandler + *fill* 0x00000000080004e6 0x2 + .text.HAL_Init + 0x00000000080004e8 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x00000000080004e8 HAL_Init + .text.HAL_InitTick + 0x0000000008000510 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000008000510 HAL_InitTick + .text.HAL_IncTick + 0x0000000008000578 0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000008000578 HAL_IncTick + .text.HAL_GetTick + 0x000000000800059c 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x000000000800059c HAL_GetTick + .text.HAL_Delay + 0x00000000080005b0 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x00000000080005b0 HAL_Delay + .text.__NVIC_SetPriority + 0x00000000080005f4 0xdc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.SysTick_Config + 0x00000000080006d0 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_SetPriority + 0x0000000008000718 0x2a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + 0x0000000008000718 HAL_NVIC_SetPriority + .text.HAL_SYSTICK_Config + 0x0000000008000742 0x1a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + 0x0000000008000742 HAL_SYSTICK_Config + .text.HAL_GPIO_Init + 0x000000000800075c 0x2e0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x000000000800075c HAL_GPIO_Init + .text.HAL_GPIO_ReadPin + 0x0000000008000a3c 0x3a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x0000000008000a3c HAL_GPIO_ReadPin + .text.HAL_GPIO_WritePin + 0x0000000008000a76 0x3a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x0000000008000a76 HAL_GPIO_WritePin + .text.HAL_RCC_OscConfig + 0x0000000008000ab0 0x638 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x0000000008000ab0 HAL_RCC_OscConfig + .text.HAL_RCC_ClockConfig + 0x00000000080010e8 0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x00000000080010e8 HAL_RCC_ClockConfig + .text.HAL_RCC_GetSysClockFreq + 0x0000000008001284 0xc8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x0000000008001284 HAL_RCC_GetSysClockFreq + .text.__libc_init_array + 0x000000000800134c 0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + 0x000000000800134c __libc_init_array + .text.memset 0x0000000008001394 0x10 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + 0x0000000008001394 memset + *(.glue_7) + .glue_7 0x00000000080013a4 0x0 linker stubs + *(.glue_7t) + .glue_7t 0x00000000080013a4 0x0 linker stubs + *(.eh_frame) + .eh_frame 0x00000000080013a4 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + *(.init) + .init 0x00000000080013a4 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + 0x00000000080013a4 _init + .init 0x00000000080013a8 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + *(.fini) + .fini 0x00000000080013b0 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + 0x00000000080013b0 _fini + .fini 0x00000000080013b4 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + 0x00000000080013bc . = ALIGN (0x4) + 0x00000000080013bc _etext = . + +.vfp11_veneer 0x00000000080013bc 0x0 + .vfp11_veneer 0x00000000080013bc 0x0 linker stubs + +.v4_bx 0x00000000080013bc 0x0 + .v4_bx 0x00000000080013bc 0x0 linker stubs + +.iplt 0x00000000080013bc 0x0 + .iplt 0x00000000080013bc 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + +.rodata 0x00000000080013bc 0x30 + 0x00000000080013bc . = ALIGN (0x4) + *(.rodata) + .rodata 0x00000000080013bc 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + *(.rodata*) + .rodata.AHBPrescTable + 0x00000000080013dc 0x10 Core/Src/system_stm32f0xx.o + 0x00000000080013dc AHBPrescTable + 0x00000000080013ec . = ALIGN (0x4) + +.rel.dyn 0x00000000080013ec 0x0 + .rel.iplt 0x00000000080013ec 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + +.ARM.extab 0x00000000080013ec 0x0 + 0x00000000080013ec . = ALIGN (0x4) + *(.ARM.extab* .gnu.linkonce.armextab.*) + 0x00000000080013ec . = ALIGN (0x4) + +.ARM 0x00000000080013ec 0x0 + 0x00000000080013ec . = ALIGN (0x4) + 0x00000000080013ec __exidx_start = . + *(.ARM.exidx*) + 0x00000000080013ec __exidx_end = . + 0x00000000080013ec . = ALIGN (0x4) + +.preinit_array 0x00000000080013ec 0x0 + 0x00000000080013ec . = ALIGN (0x4) + 0x00000000080013ec PROVIDE (__preinit_array_start = .) + *(.preinit_array*) + 0x00000000080013ec PROVIDE (__preinit_array_end = .) + 0x00000000080013ec . = ALIGN (0x4) + +.init_array 0x00000000080013ec 0x4 + 0x00000000080013ec . = ALIGN (0x4) + 0x00000000080013ec PROVIDE (__init_array_start = .) + *(SORT_BY_NAME(.init_array.*)) + *(.init_array*) + .init_array 0x00000000080013ec 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + 0x00000000080013f0 PROVIDE (__init_array_end = .) + 0x00000000080013f0 . = ALIGN (0x4) + +.fini_array 0x00000000080013f0 0x4 + 0x00000000080013f0 . = ALIGN (0x4) + [!provide] PROVIDE (__fini_array_start = .) + *(SORT_BY_NAME(.fini_array.*)) + *(.fini_array*) + .fini_array 0x00000000080013f0 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + [!provide] PROVIDE (__fini_array_end = .) + 0x00000000080013f4 . = ALIGN (0x4) + 0x00000000080013f4 _sidata = LOADADDR (.data) + +.data 0x0000000020000000 0xc load address 0x00000000080013f4 + 0x0000000020000000 . = ALIGN (0x4) + 0x0000000020000000 _sdata = . + *(.data) + *(.data*) + .data.SystemCoreClock + 0x0000000020000000 0x4 Core/Src/system_stm32f0xx.o + 0x0000000020000000 SystemCoreClock + .data.uwTickPrio + 0x0000000020000004 0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000020000004 uwTickPrio + .data.uwTickFreq + 0x0000000020000008 0x1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000020000008 uwTickFreq + *(.RamFunc) + *(.RamFunc*) + 0x000000002000000c . = ALIGN (0x4) + *fill* 0x0000000020000009 0x3 + 0x000000002000000c _edata = . + +.igot.plt 0x000000002000000c 0x0 load address 0x0000000008001400 + .igot.plt 0x000000002000000c 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + 0x000000002000000c . = ALIGN (0x4) + +.bss 0x000000002000000c 0x20 load address 0x0000000008001400 + 0x000000002000000c _sbss = . + 0x000000002000000c __bss_start__ = _sbss + *(.bss) + .bss 0x000000002000000c 0x1c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + *(.bss*) + *(COMMON) + COMMON 0x0000000020000028 0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000020000028 uwTick + 0x000000002000002c . = ALIGN (0x4) + 0x000000002000002c _ebss = . + 0x000000002000002c __bss_end__ = _ebss + +._user_heap_stack + 0x000000002000002c 0x604 load address 0x0000000008001400 + 0x0000000020000030 . = ALIGN (0x8) + *fill* 0x000000002000002c 0x4 + [!provide] PROVIDE (end = .) + 0x0000000020000030 PROVIDE (_end = .) + 0x0000000020000230 . = (. + _Min_Heap_Size) + *fill* 0x0000000020000030 0x200 + 0x0000000020000630 . = (. + _Min_Stack_Size) + *fill* 0x0000000020000230 0x400 + 0x0000000020000630 . = ALIGN (0x8) + +/DISCARD/ + libc.a(*) + libm.a(*) + libgcc.a(*) + +.ARM.attributes + 0x0000000000000000 0x28 + *(.ARM.attributes) + .ARM.attributes + 0x0000000000000000 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .ARM.attributes + 0x000000000000001e 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + .ARM.attributes + 0x000000000000004a 0x31 Core/Src/main.o + .ARM.attributes + 0x000000000000007b 0x31 Core/Src/stm32f0xx_hal_msp.o + .ARM.attributes + 0x00000000000000ac 0x31 Core/Src/stm32f0xx_it.o + .ARM.attributes + 0x00000000000000dd 0x31 Core/Src/system_stm32f0xx.o + .ARM.attributes + 0x000000000000010e 0x21 Core/Startup/startup_stm32f030f4px.o + .ARM.attributes + 0x000000000000012f 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .ARM.attributes + 0x0000000000000160 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .ARM.attributes + 0x0000000000000191 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .ARM.attributes + 0x00000000000001c2 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .ARM.attributes + 0x00000000000001f3 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .ARM.attributes + 0x000000000000021f 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .ARM.attributes + 0x000000000000024b 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + .ARM.attributes + 0x0000000000000269 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + .ARM.attributes + 0x0000000000000287 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o +OUTPUT(LED.elf elf32-littlearm) + +.debug_info 0x0000000000000000 0x2838 + .debug_info 0x0000000000000000 0x554 Core/Src/main.o + .debug_info 0x0000000000000554 0x25e Core/Src/stm32f0xx_hal_msp.o + .debug_info 0x00000000000007b2 0x1a2 Core/Src/stm32f0xx_it.o + .debug_info 0x0000000000000954 0x29e Core/Src/system_stm32f0xx.o + .debug_info 0x0000000000000bf2 0x22 Core/Startup/startup_stm32f030f4px.o + .debug_info 0x0000000000000c14 0x667 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_info 0x000000000000127b 0x744 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_info 0x00000000000019bf 0x66f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_info 0x000000000000202e 0x80a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + +.debug_abbrev 0x0000000000000000 0xce0 + .debug_abbrev 0x0000000000000000 0x1a0 Core/Src/main.o + .debug_abbrev 0x00000000000001a0 0x109 Core/Src/stm32f0xx_hal_msp.o + .debug_abbrev 0x00000000000002a9 0xc6 Core/Src/stm32f0xx_it.o + .debug_abbrev 0x000000000000036f 0x12b Core/Src/system_stm32f0xx.o + .debug_abbrev 0x000000000000049a 0x12 Core/Startup/startup_stm32f030f4px.o + .debug_abbrev 0x00000000000004ac 0x1f2 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_abbrev 0x000000000000069e 0x273 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_abbrev 0x0000000000000911 0x1c0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_abbrev 0x0000000000000ad1 0x20f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + +.debug_aranges 0x0000000000000000 0x350 + .debug_aranges + 0x0000000000000000 0x38 Core/Src/main.o + .debug_aranges + 0x0000000000000038 0x20 Core/Src/stm32f0xx_hal_msp.o + .debug_aranges + 0x0000000000000058 0x40 Core/Src/stm32f0xx_it.o + .debug_aranges + 0x0000000000000098 0x28 Core/Src/system_stm32f0xx.o + .debug_aranges + 0x00000000000000c0 0x28 Core/Startup/startup_stm32f030f4px.o + .debug_aranges + 0x00000000000000e8 0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_aranges + 0x00000000000001b8 0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_aranges + 0x0000000000000278 0x58 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_aranges + 0x00000000000002d0 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + +.debug_ranges 0x0000000000000000 0x2c8 + .debug_ranges 0x0000000000000000 0x28 Core/Src/main.o + .debug_ranges 0x0000000000000028 0x10 Core/Src/stm32f0xx_hal_msp.o + .debug_ranges 0x0000000000000038 0x30 Core/Src/stm32f0xx_it.o + .debug_ranges 0x0000000000000068 0x18 Core/Src/system_stm32f0xx.o + .debug_ranges 0x0000000000000080 0x20 Core/Startup/startup_stm32f030f4px.o + .debug_ranges 0x00000000000000a0 0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_ranges 0x0000000000000160 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_ranges 0x0000000000000210 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_ranges 0x0000000000000258 0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + +.debug_macro 0x0000000000000000 0xddc1 + .debug_macro 0x0000000000000000 0x1a8 Core/Src/main.o + .debug_macro 0x00000000000001a8 0xa48 Core/Src/main.o + .debug_macro 0x0000000000000bf0 0x127 Core/Src/main.o + .debug_macro 0x0000000000000d17 0x2e Core/Src/main.o + .debug_macro 0x0000000000000d45 0x22 Core/Src/main.o + .debug_macro 0x0000000000000d67 0x22 Core/Src/main.o + .debug_macro 0x0000000000000d89 0x8e Core/Src/main.o + .debug_macro 0x0000000000000e17 0x51 Core/Src/main.o + .debug_macro 0x0000000000000e68 0xef Core/Src/main.o + .debug_macro 0x0000000000000f57 0x6a Core/Src/main.o + .debug_macro 0x0000000000000fc1 0x1df Core/Src/main.o + .debug_macro 0x00000000000011a0 0x1c Core/Src/main.o + .debug_macro 0x00000000000011bc 0x22 Core/Src/main.o + .debug_macro 0x00000000000011de 0xb5 Core/Src/main.o + .debug_macro 0x0000000000001293 0x391 Core/Src/main.o + .debug_macro 0x0000000000001624 0x6e60 Core/Src/main.o + .debug_macro 0x0000000000008484 0x3c Core/Src/main.o + .debug_macro 0x00000000000084c0 0x3461 Core/Src/main.o + .debug_macro 0x000000000000b921 0x174 Core/Src/main.o + .debug_macro 0x000000000000ba95 0x55 Core/Src/main.o + .debug_macro 0x000000000000baea 0x924 Core/Src/main.o + .debug_macro 0x000000000000c40e 0xe5 Core/Src/main.o + .debug_macro 0x000000000000c4f3 0x12f Core/Src/main.o + .debug_macro 0x000000000000c622 0xb3 Core/Src/main.o + .debug_macro 0x000000000000c6d5 0x1a0 Core/Src/main.o + .debug_macro 0x000000000000c875 0x1ed Core/Src/main.o + .debug_macro 0x000000000000ca62 0x34 Core/Src/main.o + .debug_macro 0x000000000000ca96 0x43 Core/Src/main.o + .debug_macro 0x000000000000cad9 0x28 Core/Src/main.o + .debug_macro 0x000000000000cb01 0xb0 Core/Src/main.o + .debug_macro 0x000000000000cbb1 0x15a Core/Src/main.o + .debug_macro 0x000000000000cd0b 0x22c Core/Src/main.o + .debug_macro 0x000000000000cf37 0x60 Core/Src/main.o + .debug_macro 0x000000000000cf97 0xa5 Core/Src/main.o + .debug_macro 0x000000000000d03c 0x4c Core/Src/main.o + .debug_macro 0x000000000000d088 0x2b Core/Src/main.o + .debug_macro 0x000000000000d0b3 0xf1 Core/Src/main.o + .debug_macro 0x000000000000d1a4 0x58 Core/Src/main.o + .debug_macro 0x000000000000d1fc 0x1a8 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x000000000000d3a4 0x1b2 Core/Src/stm32f0xx_it.o + .debug_macro 0x000000000000d556 0x199 Core/Src/system_stm32f0xx.o + .debug_macro 0x000000000000d6ef 0x1bd Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x000000000000d8ac 0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x000000000000da45 0x1d1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x000000000000dc16 0x1ab Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + +.debug_line 0x0000000000000000 0x3b83 + .debug_line 0x0000000000000000 0x6c1 Core/Src/main.o + .debug_line 0x00000000000006c1 0x655 Core/Src/stm32f0xx_hal_msp.o + .debug_line 0x0000000000000d16 0x6ad Core/Src/stm32f0xx_it.o + .debug_line 0x00000000000013c3 0x66f Core/Src/system_stm32f0xx.o + .debug_line 0x0000000000001a32 0x89 Core/Startup/startup_stm32f030f4px.o + .debug_line 0x0000000000001abb 0x80b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_line 0x00000000000022c6 0x823 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_line 0x0000000000002ae9 0x7ce Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_line 0x00000000000032b7 0x8cc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + +.debug_str 0x0000000000000000 0x52cf2 + .debug_str 0x0000000000000000 0x52155 Core/Src/main.o + 0x523d2 (size before relaxing) + .debug_str 0x0000000000052155 0x2c Core/Src/stm32f0xx_hal_msp.o + 0x521cd (size before relaxing) + .debug_str 0x0000000000052181 0x76 Core/Src/stm32f0xx_it.o + 0x521bd (size before relaxing) + .debug_str 0x00000000000521f7 0x5f Core/Src/system_stm32f0xx.o + 0x520cc (size before relaxing) + .debug_str 0x0000000000052256 0x36 Core/Startup/startup_stm32f030f4px.o + 0x67 (size before relaxing) + .debug_str 0x000000000005228c 0x40f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x5259f (size before relaxing) + .debug_str 0x000000000005269b 0x204 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + 0x52457 (size before relaxing) + .debug_str 0x000000000005289f 0x213 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x52368 (size before relaxing) + .debug_str 0x0000000000052ab2 0x240 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x524d6 (size before relaxing) + +.comment 0x0000000000000000 0x7b + .comment 0x0000000000000000 0x7b Core/Src/main.o + 0x7c (size before relaxing) + .comment 0x000000000000007b 0x7c Core/Src/stm32f0xx_hal_msp.o + .comment 0x000000000000007b 0x7c Core/Src/stm32f0xx_it.o + .comment 0x000000000000007b 0x7c Core/Src/system_stm32f0xx.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + +.debug_frame 0x0000000000000000 0x9f8 + .debug_frame 0x0000000000000000 0x88 Core/Src/main.o + .debug_frame 0x0000000000000088 0x30 Core/Src/stm32f0xx_hal_msp.o + .debug_frame 0x00000000000000b8 0x9c Core/Src/stm32f0xx_it.o + .debug_frame 0x0000000000000154 0x4c Core/Src/system_stm32f0xx.o + .debug_frame 0x00000000000001a0 0x2a4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_frame 0x0000000000000444 0x2a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_frame 0x00000000000006e4 0x110 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_frame 0x00000000000007f4 0x198 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_frame 0x000000000000098c 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .debug_frame 0x00000000000009b8 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .debug_frame 0x00000000000009d8 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) diff --git a/LED/Debug/makefile b/LED/Debug/makefile new file mode 100644 index 0000000..2b3b6d9 --- /dev/null +++ b/LED/Debug/makefile @@ -0,0 +1,109 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +-include ../makefile.init + +RM := rm -rf + +# All of the sources participating in the build are defined here +-include sources.mk +-include Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk +-include Core/Startup/subdir.mk +-include Core/Src/subdir.mk +-include subdir.mk +-include objects.mk + +ifneq ($(MAKECMDGOALS),clean) +ifneq ($(strip $(CC_DEPS)),) +-include $(CC_DEPS) +endif +ifneq ($(strip $(C++_DEPS)),) +-include $(C++_DEPS) +endif +ifneq ($(strip $(C_UPPER_DEPS)),) +-include $(C_UPPER_DEPS) +endif +ifneq ($(strip $(CXX_DEPS)),) +-include $(CXX_DEPS) +endif +ifneq ($(strip $(S_DEPS)),) +-include $(S_DEPS) +endif +ifneq ($(strip $(S_UPPER_DEPS)),) +-include $(S_UPPER_DEPS) +endif +ifneq ($(strip $(C_DEPS)),) +-include $(C_DEPS) +endif +ifneq ($(strip $(CPP_DEPS)),) +-include $(CPP_DEPS) +endif +endif + +-include ../makefile.defs + +BUILD_ARTIFACT_NAME := LED +BUILD_ARTIFACT_EXTENSION := elf +BUILD_ARTIFACT_PREFIX := +BUILD_ARTIFACT := $(BUILD_ARTIFACT_PREFIX)$(BUILD_ARTIFACT_NAME).$(BUILD_ARTIFACT_EXTENSION) + +# Add inputs and outputs from these tool invocations to the build variables +EXECUTABLES += \ +LED.elf \ + +SIZE_OUTPUT += \ +default.size.stdout \ + +OBJDUMP_LIST += \ +LED.list \ + +OBJCOPY_BIN += \ +LED.bin \ + + +# All Target +all: main-build + +# Main-build Target +main-build: LED.elf secondary-outputs + +# Tool invocations +LED.elf: $(OBJS) $(USER_OBJS) /home/jof/STM32CubeIDE/workspace_1.5.0/LED/STM32F030F4PX_FLASH.ld + arm-none-eabi-g++ -o "LED.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m0 -T"/home/jof/STM32CubeIDE/workspace_1.5.0/LED/STM32F030F4PX_FLASH.ld" --specs=nosys.specs -Wl,-Map="LED.map" -Wl,--gc-sections -static --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -lstdc++ -lsupc++ -Wl,--end-group + @echo 'Finished building target: $@' + @echo ' ' + +default.size.stdout: $(EXECUTABLES) + arm-none-eabi-size $(EXECUTABLES) + @echo 'Finished building: $@' + @echo ' ' + +LED.list: $(EXECUTABLES) + arm-none-eabi-objdump -h -S $(EXECUTABLES) > "LED.list" + @echo 'Finished building: $@' + @echo ' ' + +LED.bin: $(EXECUTABLES) + arm-none-eabi-objcopy -O binary $(EXECUTABLES) "LED.bin" + @echo 'Finished building: $@' + @echo ' ' + +# Other Targets +clean: + -$(RM) * + -@echo ' ' + +secondary-outputs: $(SIZE_OUTPUT) $(OBJDUMP_LIST) $(OBJCOPY_BIN) + +fail-specified-linker-script-missing: + @echo 'Error: Cannot find the specified linker script. Check the linker settings in the build configuration.' + @exit 2 + +warn-no-linker-script-specified: + @echo 'Warning: No linker script specified. Check the linker settings in the build configuration.' + +.PHONY: all clean dependents fail-specified-linker-script-missing warn-no-linker-script-specified +.SECONDARY: + +-include ../makefile.targets diff --git a/LED/Debug/objects.list b/LED/Debug/objects.list new file mode 100644 index 0000000..e4ae9df --- /dev/null +++ b/LED/Debug/objects.list @@ -0,0 +1,22 @@ +"Core/Src/main.o" +"Core/Src/stm32f0xx_hal_msp.o" +"Core/Src/stm32f0xx_it.o" +"Core/Src/syscalls.o" +"Core/Src/sysmem.o" +"Core/Src/system_stm32f0xx.o" +"Core/Startup/startup_stm32f030f4px.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o" diff --git a/LED/Debug/objects.mk b/LED/Debug/objects.mk new file mode 100644 index 0000000..742c2da --- /dev/null +++ b/LED/Debug/objects.mk @@ -0,0 +1,8 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +USER_OBJS := + +LIBS := + diff --git a/LED/Debug/sources.mk b/LED/Debug/sources.mk new file mode 100644 index 0000000..3a566d6 --- /dev/null +++ b/LED/Debug/sources.mk @@ -0,0 +1,35 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +ELF_SRCS := +C_UPPER_SRCS := +CXX_SRCS := +C++_SRCS := +OBJ_SRCS := +S_SRCS := +CC_SRCS := +C_SRCS := +CPP_SRCS := +S_UPPER_SRCS := +O_SRCS := +OBJDUMP_LIST := +C_UPPER_DEPS := +S_DEPS := +C_DEPS := +OBJCOPY_BIN := +CC_DEPS := +SIZE_OUTPUT := +C++_DEPS := +EXECUTABLES := +OBJS := +CXX_DEPS := +S_UPPER_DEPS := +CPP_DEPS := + +# Every subdirectory with source files must be described here +SUBDIRS := \ +Core/Src \ +Core/Startup \ +Drivers/STM32F0xx_HAL_Driver/Src \ + diff --git a/LED/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h b/LED/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h new file mode 100644 index 0000000..45ef5d5 --- /dev/null +++ b/LED/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h @@ -0,0 +1,5359 @@ +/** + ****************************************************************************** + * @file stm32f030x6.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F0xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f030x6 + * @{ + */ + +#ifndef __STM32F030x6_H +#define __STM32F030x6_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + + /** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M0 Processor and Core Peripherals + */ +#define __CM0_REV 0 /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */ +#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F0xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ + +/****** STM32F0 specific Interrupt Numbers ******************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + USART1_IRQn = 27 /*!< USART1 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */ +#include "system_stm32f0xx.h" /* STM32F0xx System Header */ +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!
© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx + * @{ + */ + +#ifndef __STM32F0xx_H +#define __STM32F0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F0) +#define STM32F0 +#endif /* STM32F0 */ + +/** Uncomment the line below according to the target STM32 device used in your application. + * stm32f0xxxx.h file contains: + * - All the peripheral register's definitions, bits definitions and memory mapping for STM32F0xxxx devices + * - IRQ channel definition + * - Peripheral memory mapping and physical registers address definition + * - Peripheral pointer declaration and driver header file inclusion + * - Product miscellaneous configuration: assert macros… + * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family’s superset. + */ + +#if !defined (STM32F030x6) && !defined (STM32F030x8) && \ + !defined (STM32F031x6) && !defined (STM32F038xx) && \ + !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \ + !defined (STM32F051x8) && !defined (STM32F058xx) && \ + !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \ + !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC) + /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */ + /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */ + /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F048xx */ /*!< STM32F048xx Devices (STM32F048xx microcontrollers where the Flash memory is 32 Kbytes) */ + /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */ + /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */ + /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */ + /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */ + /* #define STM32F091xC */ /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes) */ + /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */ +#endif +/* Legacy aliases */ +#if defined (STM32F048x6) + #define STM32F048xx +#endif /* STM32F048x6 */ + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V2.3.5 + */ +#define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ +#define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ +#define __STM32F0_DEVICE_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */ +#define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\ + |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\ + |(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\ + |(__STM32F0_DEVICE_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32F030x6) + #include "stm32f030x6.h" +#elif defined(STM32F030x8) + #include "stm32f030x8.h" +#elif defined(STM32F031x6) + #include "stm32f031x6.h" +#elif defined(STM32F038xx) + #include "stm32f038xx.h" +#elif defined(STM32F042x6) + #include "stm32f042x6.h" +#elif defined(STM32F048xx) + #include "stm32f048xx.h" +#elif defined(STM32F051x8) + #include "stm32f051x8.h" +#elif defined(STM32F058xx) + #include "stm32f058xx.h" +#elif defined(STM32F070x6) + #include "stm32f070x6.h" +#elif defined(STM32F070xB) + #include "stm32f070xb.h" +#elif defined(STM32F071xB) + #include "stm32f071xb.h" +#elif defined(STM32F072xB) + #include "stm32f072xb.h" +#elif defined(STM32F078xx) + #include "stm32f078xx.h" +#elif defined(STM32F091xC) + #include "stm32f091xc.h" +#elif defined(STM32F098xx) + #include "stm32f098xx.h" +#elif defined(STM32F030xC) + #include "stm32f030xc.h" +#else + #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0U, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0U, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + SUCCESS = 0U, + ERROR = !SUCCESS +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32f0xx_hal.h" +#endif /* USE_HAL_DRIVER */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F0xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h b/LED/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h new file mode 100644 index 0000000..fafabf4 --- /dev/null +++ b/LED/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h @@ -0,0 +1,105 @@ +/** + ****************************************************************************** + * @file system_stm32f0xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F0XX_H +#define __SYSTEM_STM32F0XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F0xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F0xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 3) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) by calling HAL API function HAL_RCC_ClockConfig() + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ +extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ +extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F0XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/CMSIS/Include/cmsis_armcc.h b/LED/Drivers/CMSIS/Include/cmsis_armcc.h new file mode 100644 index 0000000..7d751fb --- /dev/null +++ b/LED/Drivers/CMSIS/Include/cmsis_armcc.h @@ -0,0 +1,865 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() do {\ + __schedule_barrier();\ + __isb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() do {\ + __schedule_barrier();\ + __dsb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() do {\ + __schedule_barrier();\ + __dmb(0xF);\ + __schedule_barrier();\ + } while (0U) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/LED/Drivers/CMSIS/Include/cmsis_armclang.h b/LED/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..d8031b0 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1869 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF); + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF); + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF); + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ (uint8_t)__builtin_clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/LED/Drivers/CMSIS/Include/cmsis_compiler.h b/LED/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..79a2cac --- /dev/null +++ b/LED/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,266 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/LED/Drivers/CMSIS/Include/cmsis_gcc.h b/LED/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..1bd41a4 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2085 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.0.4 + * @date 09. April 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ (uint8_t)__builtin_clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/LED/Drivers/CMSIS/Include/cmsis_iccarm.h b/LED/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..3c90a2c --- /dev/null +++ b/LED/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,935 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.0.7 + * @date 19. June 2018 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2018 IAR Systems +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/LED/Drivers/CMSIS/Include/cmsis_version.h b/LED/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..ae3f2e3 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.2 + * @date 19. April 2017 + ******************************************************************************/ +/* + * Copyright (c) 2009-2017 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/LED/Drivers/CMSIS/Include/core_armv8mbl.h b/LED/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..ec76ab2 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1918 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 22. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_armv8mml.h b/LED/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..2d0f106 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2927 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 06. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm0.h b/LED/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..6f82227 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,949 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.5 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm0plus.h b/LED/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..b9377e8 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1083 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm1.h b/LED/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..fd1c407 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,976 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 23. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm23.h b/LED/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..8202a8d --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1993 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 22. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm3.h b/LED/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..b0dfbd3 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1941 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm33.h b/LED/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..02f82e2 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,3002 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.0.9 + * @date 06. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_PCS_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm4.h b/LED/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..308b868 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2129 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_cm7.h b/LED/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..ada6c2a --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2671 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_INLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_INLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_INLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_INLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_INLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_INLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_INLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_INLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t)addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCIMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCIMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_sc000.h b/LED/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..9086c64 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1022 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.5 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/core_sc300.h b/LED/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..665822d --- /dev/null +++ b/LED/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1915 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + uint32_t RESERVED1[1U]; +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/LED/Drivers/CMSIS/Include/mpu_armv7.h b/LED/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..7d4b600 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,270 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if non-shareable) or 010b (if shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/LED/Drivers/CMSIS/Include/mpu_armv8.h b/LED/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..99ee9f9 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,333 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M MPU + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/LED/Drivers/CMSIS/Include/tz_context.h b/LED/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..d4c1474 --- /dev/null +++ b/LED/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..43cafcb --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3783 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ + +#if defined(STM32L1) + #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the events that can be selected to configure the + * set/reset crossbar of a timer output + */ +#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) +#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) +#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) +#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) +#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) +#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) +#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) +#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) +#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) + +#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) +#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) +#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) +#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) +#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) +#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) +#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) +#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) +#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) + +/** @brief Constants defining the event filtering applied to external events + * by a timer + */ +#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) + #define I2S_IT_TXE I2S_IT_TXP + #define I2S_IT_RXNE I2S_IT_RXP + + #define I2S_FLAG_TXE I2S_FLAG_TXP + #define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) + #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT + +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + + #define SPI_FLAG_TXE SPI_FLAG_TXP + #define SPI_FLAG_RXNE SPI_FLAG_RXP + + #define SPI_IT_TXE SPI_IT_TXP + #define SPI_IT_RXNE SPI_IT_RXP + + #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET + #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET + #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET + #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + + /** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ + /** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + + /** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) + #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h new file mode 100644 index 0000000..a100055 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h @@ -0,0 +1,585 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_H +#define __STM32F0xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_conf.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup HAL_Private_Macros + * @{ + */ +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \ + defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \ + defined(STM32F070xB) || defined(STM32F030x6) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#else +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#endif +#if defined(SYSCFG_CFGR1_PA11_PA12_RMP) +#define IS_HAL_REMAP_PIN(RMP) ((RMP) == HAL_REMAP_PA11_PA12) +#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ +#if defined(STM32F091xC) || defined(STM32F098xx) +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4)) +#endif /* STM32F091xC || STM32F098xx */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; + +/** + * @} + */ + +#if defined(SYSCFG_CFGR1_PA11_PA12_RMP) +/** @defgroup HAL_Pin_remapping HAL Pin remapping + * @{ + */ +#define HAL_REMAP_PA11_PA12 (SYSCFG_CFGR1_PA11_PA12_RMP) /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins). + 0: No remap (pin pair PA9/10 mapped on the pins) + 1: Remap (pin pair PA11/12 mapped instead of PA9/10) */ + +/** + * @} + */ +#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ + +#if defined(STM32F091xC) || defined(STM32F098xx) +/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection + * @note Applicable on STM32F09x + * @{ + */ +#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* 01: USART1 is selected as IRDA Modulation enveloppe source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 10: USART4 is selected as IRDA Modulation enveloppe source */ + +/** + * @} + */ +#endif /* STM32F091xC || STM32F098xx */ + + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO + * @{ + */ + +/** @brief Fast-mode Plus driving capability on a specific GPIO + */ +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \ + defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \ + defined(STM32F070xB) || defined(STM32F030x6) +#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast-mode Plus on PA9 */ +#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast-mode Plus on PA10 */ +#endif +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< Enable Fast-mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< Enable Fast-mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< Enable Fast-mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< Enable Fast-mode Plus on PB9 */ + +/** + * @} + */ + + +#if defined(STM32F091xC) || defined (STM32F098xx) +/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper + * @brief ISR Wrapper + * @note applicable on STM32F09x + * @{ + */ +#define HAL_SYSCFG_ITLINE0 ( 0x00000000U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE1 ( 0x00000001U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE2 ( 0x00000002U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE3 ( 0x00000003U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE4 ( 0x00000004U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE5 ( 0x00000005U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE6 ( 0x00000006U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE7 ( 0x00000007U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE8 ( 0x00000008U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE9 ( 0x00000009U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE10 ( 0x0000000AU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE11 ( 0x0000000BU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE12 ( 0x0000000CU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE13 ( 0x0000000DU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE14 ( 0x0000000EU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE15 ( 0x0000000FU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE16 ( 0x00000010U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE17 ( 0x00000011U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE18 ( 0x00000012U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE19 ( 0x00000013U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE20 ( 0x00000014U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE21 ( 0x00000015U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE22 ( 0x00000016U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE23 ( 0x00000017U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE24 ( 0x00000018U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE25 ( 0x00000019U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE26 ( 0x0000001AU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE27 ( 0x0000001BU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE28 ( 0x0000001CU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE29 ( 0x0000001DU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE30 ( 0x0000001EU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE31 ( 0x0000001FU) /*!< Internal define for macro handling */ + +#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */ +#if defined(STM32F091xC) +#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */ +#endif +#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */ +#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */ +#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */ +#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */ +#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */ +#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */ +#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */ +#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */ +#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */ +#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */ +#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */ +#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */ +#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */ +#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */ +#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */ +#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */ +#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */ +#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */ +#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */ +#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */ +#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */ +#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */ +#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */ +#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */ +#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */ +#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */ +#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */ +#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */ +#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */ +#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */ +#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */ +#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */ +#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */ +#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */ +#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */ +#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */ +#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */ +#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */ +#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */ +#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */ +#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */ +#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */ +#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */ +#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */ +#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */ +#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */ +#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */ +#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */ +#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */ +#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */ +#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */ +#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */ +#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */ +#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */ +#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */ +#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */ +#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */ +#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */ +#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */ +#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */ +#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */ +#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */ +/** + * @} + */ +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup HAL_Freeze_Unfreeze_Peripherals HAL Freeze Unfreeze Peripherals + * @brief Freeze/Unfreeze Peripherals in Debug mode + * @{ + */ + +#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP) +#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP)) +#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) +#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) +#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */ + +#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) +#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) +#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP) +#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP) +#define __HAL_DBGMCU_FREEZE_TIM15() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM15() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM16() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM17() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */ + +/** + * @} + */ + +/** @defgroup Memory_Mapping_Selection Memory Mapping Selection + * @{ + */ +#if defined(SYSCFG_CFGR1_MEM_MODE) +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE)) +#endif /* SYSCFG_CFGR1_MEM_MODE */ + +#if defined(SYSCFG_CFGR1_MEM_MODE_0) +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \ + SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \ + }while(0) +#endif /* SYSCFG_CFGR1_MEM_MODE_0 */ + +#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1) +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \ + SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \ + }while(0) +#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */ +/** + * @} + */ + + +#if defined(SYSCFG_CFGR1_PA11_PA12_RMP) +/** @defgroup HAL_Pin_remap HAL Pin remap + * @brief Pin remapping enable/disable macros + * @param __PIN_REMAP__ This parameter can be a value of @ref HAL_Pin_remapping + * @{ + */ +#define __HAL_REMAP_PIN_ENABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \ + SYSCFG->CFGR1 |= (__PIN_REMAP__); \ + }while(0) +#define __HAL_REMAP_PIN_DISABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \ + SYSCFG->CFGR1 &= ~(__PIN_REMAP__); \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO values. + * That you can find above these macros. + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) +#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) +/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable + * @{ + */ +/** @brief SYSCFG Break Lockup lock + * Enables and locks the connection of Cortex-M0 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */ + +#if defined(SYSCFG_CFGR2_PVD_LOCK) +/** @defgroup PVD_Lock_Enable PVD Lock + * @{ + */ +/** @brief SYSCFG Break PVD lock + * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_PVD_LOCK */ + +#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK) +/** @defgroup SRAM_Parity_Lock SRAM Parity Lock + * @{ + */ +/** @brief SYSCFG Break SRAM PARITY lock + * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17 + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */ + +#if defined(SYSCFG_CFGR2_SRAM_PEF) +/** @defgroup HAL_SYSCFG_Parity_check_on_RAM HAL SYSCFG Parity check on RAM + * @brief Parity check on RAM disable macro + * @note Disabling the parity check on RAM locks the configuration bit. + * To re-enable the parity check on RAM perform a system reset. + * @{ + */ +#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PEF) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_SRAM_PEF */ + + +#if defined(STM32F091xC) || defined (STM32F098xx) +/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check + * @brief ISR wrapper check + * @note This feature is applicable on STM32F09x + * @note Allow to determine interrupt source per line. + * @{ + */ +#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF)) +/** + * @} + */ +#endif /* (STM32F091xC) || defined (STM32F098xx)*/ + +#if defined(STM32F091xC) || defined (STM32F098xx) +/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection + * @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register + * @note This feature is applicable on STM32F09x + * @param __SOURCE__ This parameter can be a value of @ref HAL_IRDA_ENV_SEL + * @{ + */ +#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__))); \ + SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_IRDA_ENV_SEL); \ + SYSCFG->CFGR1 |= (__SOURCE__); \ + }while(0) + +#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0) +/** + * @} + */ +#endif /* (STM32F091xC) || defined (STM32F098xx)*/ + +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h new file mode 100644 index 0000000..e471200 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h @@ -0,0 +1,133 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_CORTEX_H +#define __STM32F0xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX CORTEX + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 (0x00000000U) +#define SYSTICK_CLKSOURCE_HCLK (0x00000004U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported Macros -----------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ +/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions *******************************/ +void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ + +/* Peripheral Control functions *************************************************/ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_CORTEX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h new file mode 100644 index 0000000..b2f6105 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h @@ -0,0 +1,178 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_DEF +#define __STM32F0xx_HAL_DEF + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) + /* Reserved for future use */ + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5*/ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ___STM32F0xx_HAL_DEF */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h new file mode 100644 index 0000000..db71942 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h @@ -0,0 +1,563 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_DMA_H +#define __STM32F0xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ +} DMA_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER (0x00000004U) /*!< no ongoin transfer */ +#define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE (0x00000000U) /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE (0x00000000U) /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE (0x00000000U) /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE (0x00000000U) /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL (0x00000000U) /*!< Normal Mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW (0x00000000U) /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ + +#define DMA_FLAG_GL1 (0x00000001U) /*!< Channel 1 global interrupt flag */ +#define DMA_FLAG_TC1 (0x00000002U) /*!< Channel 1 transfer complete flag */ +#define DMA_FLAG_HT1 (0x00000004U) /*!< Channel 1 half transfer flag */ +#define DMA_FLAG_TE1 (0x00000008U) /*!< Channel 1 transfer error flag */ +#define DMA_FLAG_GL2 (0x00000010U) /*!< Channel 2 global interrupt flag */ +#define DMA_FLAG_TC2 (0x00000020U) /*!< Channel 2 transfer complete flag */ +#define DMA_FLAG_HT2 (0x00000040U) /*!< Channel 2 half transfer flag */ +#define DMA_FLAG_TE2 (0x00000080U) /*!< Channel 2 transfer error flag */ +#define DMA_FLAG_GL3 (0x00000100U) /*!< Channel 3 global interrupt flag */ +#define DMA_FLAG_TC3 (0x00000200U) /*!< Channel 3 transfer complete flag */ +#define DMA_FLAG_HT3 (0x00000400U) /*!< Channel 3 half transfer flag */ +#define DMA_FLAG_TE3 (0x00000800U) /*!< Channel 3 transfer error flag */ +#define DMA_FLAG_GL4 (0x00001000U) /*!< Channel 4 global interrupt flag */ +#define DMA_FLAG_TC4 (0x00002000U) /*!< Channel 4 transfer complete flag */ +#define DMA_FLAG_HT4 (0x00004000U) /*!< Channel 4 half transfer flag */ +#define DMA_FLAG_TE4 (0x00008000U) /*!< Channel 4 transfer error flag */ +#define DMA_FLAG_GL5 (0x00010000U) /*!< Channel 5 global interrupt flag */ +#define DMA_FLAG_TC5 (0x00020000U) /*!< Channel 5 transfer complete flag */ +#define DMA_FLAG_HT5 (0x00040000U) /*!< Channel 5 half transfer flag */ +#define DMA_FLAG_TE5 (0x00080000U) /*!< Channel 5 transfer error flag */ +#define DMA_FLAG_GL6 (0x00100000U) /*!< Channel 6 global interrupt flag */ +#define DMA_FLAG_TC6 (0x00200000U) /*!< Channel 6 transfer complete flag */ +#define DMA_FLAG_HT6 (0x00400000U) /*!< Channel 6 half transfer flag */ +#define DMA_FLAG_TE6 (0x00800000U) /*!< Channel 6 transfer error flag */ +#define DMA_FLAG_GL7 (0x01000000U) /*!< Channel 7 global interrupt flag */ +#define DMA_FLAG_TC7 (0x02000000U) /*!< Channel 7 transfer complete flag */ +#define DMA_FLAG_HT7 (0x04000000U) /*!< Channel 7 half transfer flag */ +#define DMA_FLAG_TE7 (0x08000000U) /*!< Channel 7 transfer error flag */ + +/** + * @} + */ + +#if defined(SYSCFG_CFGR1_DMA_RMP) +/** @defgroup HAL_DMA_remapping HAL DMA remapping + * Elements values convention: 0xYYYYYYYY + * - YYYYYYYY : Position in the SYSCFG register CFGR1 + * @{ + */ +#define DMA_REMAP_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap + 0: No remap (ADC DMA requests mapped on DMA channel 1 + 1: Remap (ADC DMA requests mapped on DMA channel 2 */ +#define DMA_REMAP_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap + 0: No remap (USART1_TX DMA request mapped on DMA channel 2 + 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */ +#define DMA_REMAP_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap + 0: No remap (USART1_RX DMA request mapped on DMA channel 3 + 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */ +#define DMA_REMAP_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap + 0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3) + 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */ +#define DMA_REMAP_TIM17_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap + 0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 + 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */ +#if defined (STM32F070xB) +#define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F070xB devices only. + 0: Disabled, need to remap before use + 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ + +#endif + +#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) +#define DMA_REMAP_TIM16_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only + 0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit) + 1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */ +#define DMA_REMAP_TIM17_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only + 0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit) + 1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */ +#define DMA_REMAP_SPI2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively) + 1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ +#define DMA_REMAP_USART2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively) + 1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ +#define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively) + 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ +#define DMA_REMAP_I2C1_DMA_CH76 ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively) + 1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */ +#define DMA_REMAP_TIM1_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively) + 1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */ +#define DMA_REMAP_TIM2_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively) + 1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */ +#define DMA_REMAP_TIM3_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4) + 1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */ +#endif + +/** + * @} + */ + +#endif /* SYSCFG_CFGR1_DMA_RMP */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__ DMA handle. + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + + +/* Interrupt & Flag management */ + +/** + * @brief Enables the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disables the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Returns the number of remaining data units in the current DMAy Channelx transfer. + * @param __HANDLE__ DMA handle + * + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +#if defined(SYSCFG_CFGR1_DMA_RMP) +/** @brief DMA remapping enable/disable macros + * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_remapping + */ +#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \ + SYSCFG->CFGR1 |= (__DMA_REMAP__); \ + }while(0) +#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \ + SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \ + }while(0) +#endif /* SYSCFG_CFGR1_DMA_RMP */ + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32f0xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* Input and Output operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Macros + * @{ + */ +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#if defined(SYSCFG_CFGR1_DMA_RMP) + +#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) +#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ + ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ + ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH2) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH6) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH7) || \ + ((RMP) == DMA_REMAP_SPI2_DMA_CH67) || \ + ((RMP) == DMA_REMAP_USART2_DMA_CH67) || \ + ((RMP) == DMA_REMAP_USART3_DMA_CH32) || \ + ((RMP) == DMA_REMAP_I2C1_DMA_CH76) || \ + ((RMP) == DMA_REMAP_TIM1_DMA_CH6) || \ + ((RMP) == DMA_REMAP_TIM2_DMA_CH7) || \ + ((RMP) == DMA_REMAP_TIM3_DMA_CH6)) +#elif defined (STM32F070xB) +#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_USART3_DMA_CH32) || \ + ((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ + ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ + ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH2)) +#else +#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ + ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ + ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH2)) +#endif + +#endif /* SYSCFG_CFGR1_DMA_RMP */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h new file mode 100644 index 0000000..185f833 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h @@ -0,0 +1,811 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_DMA_EX_H +#define __STM32F0xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ +#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#if !defined(STM32F030xC) +#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#endif /* !defined(STM32F030xC) */ + +/****************** DMA1 remap bit field definition********************/ +/* DMA1 - Channel 1 */ +#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/ +#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */ +#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 2 */ +#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */ +#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */ +#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */ +#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 3 */ +#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */ +#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 4 */ +#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 5 */ +#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */ +#endif /* !defined(STM32F030xC) */ + +#if !defined(STM32F030xC) +/* DMA1 - Channel 6 */ +#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */ +/* DMA1 - Channel 7 */ +#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */ + +/****************** DMA2 remap bit field definition********************/ +/* DMA2 - Channel 1 */ +#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */ +/* DMA2 - Channel 2 */ +#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */ +/* DMA2 - Channel 3 */ +#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */ +#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */ +#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */ +/* DMA2 - Channel 4 */ +#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */ +#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */ +#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */ +/* DMA2 - Channel 5 */ +#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */ +#endif /* !defined(STM32F030xC) */ + +#if defined(STM32F091xC) || defined(STM32F098xx) +#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH1_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH2_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART7_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART8_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_DAC_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM2_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_DAC_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM2_CH4) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART7_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART8_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH6_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH6_SPI2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM1_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM1_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM1_CH3) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM3_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM3_TRIG) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH7_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH7_I2C1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH7_SPI2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM2_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM2_CH4) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART7_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART8_TX)) + +#define IS_HAL_DMA2_REMAP(REQUEST) (((REQUEST) == HAL_DMA2_CH1_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH1_I2C2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART3_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART4_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART5_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART6_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART7_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART8_TX) ||\ + ((REQUEST) == HAL_DMA2_CH2_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH2_I2C2_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART1_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART2_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART3_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART4_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART5_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART6_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART7_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART8_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH3_TIM6_UP) ||\ + ((REQUEST) == HAL_DMA2_CH3_DAC_CH1) ||\ + ((REQUEST) == HAL_DMA2_CH3_SPI1_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART1_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART2_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART3_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART4_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART5_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART6_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART7_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART8_RX) ||\ + ((REQUEST) == HAL_DMA2_CH4_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH4_TIM7_UP) ||\ + ((REQUEST) == HAL_DMA2_CH4_DAC_CH2) ||\ + ((REQUEST) == HAL_DMA2_CH4_SPI1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART3_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART4_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART5_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART6_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART7_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART8_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH5_ADC) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART3_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART4_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART5_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART8_TX )) +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030xC) +#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH1_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH2_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART6_RX)) +#endif /* STM32F030xC */ + +/** + * @} + */ +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup DMAEx_Exported_Macros DMAEx Exported Macros + * @{ + */ +/* Interrupt & Flag management */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + DMA_FLAG_GL7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +#elif defined(STM32F091xC) || defined(STM32F098xx) +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\ + DMA_FLAG_GL5) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\ + (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\ + (DMA1->IFCR = (__FLAG__))) + +#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */ +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + DMA_FLAG_GL5) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_5 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_5 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +#endif + + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) +#define __HAL_DMA1_REMAP(__REQUEST__) \ + do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \ + DMA1->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \ + DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU); \ + }while(0) + +#if defined(STM32F091xC) || defined(STM32F098xx) +#define __HAL_DMA2_REMAP(__REQUEST__) \ + do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \ + DMA2->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \ + DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU); \ + }while(0) +#endif /* STM32F091xC || STM32F098xx */ + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_DMA_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h new file mode 100644 index 0000000..7dc4823 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h @@ -0,0 +1,375 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_EXTI_H +#define STM32F0xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ + +/** + * @brief HAL EXTI common Callback ID enumeration definition + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U +} EXTI_CallbackIDTypeDef; + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ +#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ +#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ +#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ +#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ +#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ +#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ +#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ +#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ +#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ +#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ +#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ +#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ +#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ +#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ +#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ + +#if defined (EXTI_IMR_MR16) +#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ +#else +#define EXTI_LINE_16 (EXTI_RESERVED | 0x10u) +#endif /* EXTI_IMR_MR16 */ + +#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ + +#if defined (EXTI_IMR_MR18) +#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ +#else +#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) +#endif /* EXTI_IMR_MR18 */ + +#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ + +#if defined (EXTI_IMR_MR20) +#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ +#else +#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) +#endif /* EXTI_IMR_MR20 */ + +#if defined (EXTI_IMR_MR21) +#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the Comparator 1 output */ +#else +#define EXTI_LINE_21 (EXTI_RESERVED | 0x15u) +#endif /* EXTI_IMR_MR21 */ + +#if defined (EXTI_IMR_MR22) +#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the Comparator 2 output */ +#else +#define EXTI_LINE_22 (EXTI_RESERVED | 0x16u) +#endif /* EXTI_IMR_MR22 */ + +#if defined (EXTI_IMR_MR23) +#define EXTI_LINE_23 (EXTI_DIRECT | 0x17u) /*!< External interrupt line 23 Connected to the internal I2C1 wakeup event */ +#else +#define EXTI_LINE_23 (EXTI_RESERVED | 0x17u) +#endif /* EXTI_IMR_MR23 */ + +#define EXTI_LINE_24 (EXTI_RESERVED | 0x18u) + +#if defined (EXTI_IMR_MR25) +#define EXTI_LINE_25 (EXTI_CONFIG | 0x19u) /*!< External interrupt line 25 Connected to the internal USART1 wakeup event */ +#else +#define EXTI_LINE_25 (EXTI_RESERVED | 0x19u) +#endif /* EXTI_IMR_MR25 */ + +#if defined (EXTI_IMR_MR26) +#define EXTI_LINE_26 (EXTI_CONFIG | 0x1Au) /*!< External interrupt line 26 Connected to the internal USART2 wakeup event */ +#else +#define EXTI_LINE_26 (EXTI_RESERVED | 0x1Au) +#endif /* EXTI_IMR_MR26 */ + +#if defined (EXTI_IMR_MR27) +#define EXTI_LINE_27 (EXTI_CONFIG | 0x1Bu) /*!< External interrupt line 27 Connected to the internal CEC wakeup event */ +#else +#define EXTI_LINE_27 (EXTI_RESERVED | 0x1Bu) +#endif /* EXTI_IMR_MR27 */ + +#if defined (EXTI_IMR_MR28) +#define EXTI_LINE_28 (EXTI_CONFIG | 0x1Cu) /*!< External interrupt line 28 Connected to the internal USART3 wakeup event */ +#else +#define EXTI_LINE_28 (EXTI_RESERVED | 0x1Cu) +#endif /* EXTI_IMR_MR28 */ + +#define EXTI_LINE_29 (EXTI_RESERVED | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | 0x1Eu) + +#if defined (EXTI_IMR_MR31) +#define EXTI_LINE_31 (EXTI_CONFIG | 0x1Fu) /*!< External interrupt line 31 Connected to the VDDIO2 supply comparator output */ +#else +#define EXTI_LINE_31 (EXTI_RESERVED | 0x1Fu) +#endif /* EXTI_IMR_MR31 */ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#if defined (GPIOD) +#define EXTI_GPIOD 0x00000003u +#endif /* GPIOD */ +#if defined (GPIOE) +#define EXTI_GPIOE 0x00000004u +#endif /* GPIOE */ +#define EXTI_GPIOF 0x00000005u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI bit usage + */ +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#define EXTI_LINE_NB 32uL + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) + +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined (GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF)) +#elif defined (GPIOD) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOF)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOF)) +#endif /* GPIOE */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_EXTI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h new file mode 100644 index 0000000..ecce5da --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h @@ -0,0 +1,353 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of Flash HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_FLASH_H +#define __STM32F0xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */ +/** + * @} + */ + +/** @addtogroup FLASH_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) + +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0U, + FLASH_PROC_PAGEERASE = 1U, + FLASH_PROC_MASSERASE = 2U, + FLASH_PROC_PROGRAMHALFWORD = 3U, + FLASH_PROC_PROGRAMWORD = 4U, + FLASH_PROC_PROGRAMDOUBLEWORD = 5U +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + + __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */ + + __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ + + __IO uint64_t Data; /*!< Internal variable to save data to be programmed */ + + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + + __IO uint32_t ErrorCode; /*!< FLASH error code + This parameter can be a value of @ref FLASH_Error_Codes */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error_Codes FLASH Error Codes + * @{ + */ + +#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */ +#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */ +#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */ + +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_HALFWORD (0x01U) /*!ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__)) + + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * The value of this parameter depend on device used within the same series + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @} + */ + +/** @defgroup FLASH_Prefetch FLASH Prefetch + * @brief macros to handle FLASH Prefetch buffer + * @{ + */ +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE)) + +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__)) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_BSY FLASH Busy flag + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32f0xx_hal_flash_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); + +/* FLASH IRQ handler function */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +uint32_t HAL_FLASH_GetError(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private function -------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h new file mode 100644 index 0000000..a4c79d8 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h @@ -0,0 +1,448 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of Flash HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_FLASH_EX_H +#define __STM32F0xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/** @addtogroup FLASHEx_Private_Macros + * @{ + */ +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \ + ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)) + +#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \ + ((VALUE) == OB_WRPSTATE_ENABLE)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ + ((LEVEL) == OB_RDP_LEVEL_1))/*||\ + ((LEVEL) == OB_RDP_LEVEL_2))*/ + +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) + +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) + +#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET)) + +#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF)) + +#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET)) + +#if defined(FLASH_OBR_BOOT_SEL) +#define IS_OB_BOOT_SEL(BOOT_SEL) (((BOOT_SEL) == OB_BOOT_SEL_RESET) || ((BOOT_SEL) == OB_BOOT_SEL_SET)) +#define IS_OB_BOOT0(BOOT0) (((BOOT0) == OB_BOOT0_RESET) || ((BOOT0) == OB_BOOT0_SET)) +#endif /* FLASH_OBR_BOOT_SEL */ + + +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U)) + +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= FLASH_BANK1_END) + +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_BANK1_END)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types + * @{ + */ +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled + This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_BANK1_END */ + + uint32_t NbPages; /*!< NbPages: Number of pagess to be erased. + This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/ + +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Options bytes program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< OptionType: Option byte to be configured. + This parameter can be a value of @ref FLASHEx_OB_Type */ + + uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_OB_WRP_State */ + + uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected + This parameter can be a value of @ref FLASHEx_OB_Write_Protection */ + + uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level.. + This parameter can be a value of @ref FLASHEx_OB_Read_Protection */ + + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: + IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY + This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, + @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1, @ref FLASHEx_OB_VDDA_Analog_Monitoring and + @ref FLASHEx_OB_RAM_Parity_Check_Enable */ + + uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed + This parameter can be a value of @ref FLASHEx_OB_Data_Address */ + + uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ +} FLASH_OBProgramInitTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Page_Size FLASHEx Page Size + * @{ + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) \ + || defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6) +#define FLASH_PAGE_SIZE 0x400U +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) \ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) +#define FLASH_PAGE_SIZE 0x800U +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */ +/** + * @} + */ + +/** @defgroup FLASHEx_Type_Erase FLASH Type Erase + * @{ + */ +#define FLASH_TYPEERASE_PAGES (0x00U) /*!
© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_GPIO_H +#define __STM32F0xx_HAL_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +}GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +}GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @{ + */ +#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */ +/** + * @} + */ + + /** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */ +#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ + ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32f0xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h new file mode 100644 index 0000000..33b27e3 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h @@ -0,0 +1,800 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_GPIO_EX_H +#define __STM32F0xx_HAL_GPIO_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + +#if defined (STM32F030x6) +/*------------------------- STM32F030x6---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F030x6 */ + +/*---------------------------------- STM32F030x8 -------------------------------------------*/ +#if defined (STM32F030x8) +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F030x8 */ + +#if defined (STM32F031x6) || defined (STM32F038xx) +/*--------------------------- STM32F031x6/STM32F038xx ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDAT ((uint8_t)0x00U) /*!< AF0: SWDAT Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F031x6 || STM32F038xx */ + +#if defined (STM32F051x8) || defined (STM32F058xx) +/*--------------------------- STM32F051x8/STM32F058xx---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F051x8/STM32F058xx */ + +#if defined (STM32F071xB) +/*--------------------------- STM32F071xB ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: AEVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: TSC Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F071xB */ + + +#if defined(STM32F091xC) || defined(STM32F098xx) +/*--------------------------- STM32F091xC || STM32F098xx ------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ +#define GPIO_AF0_USART8 ((uint8_t)0x00U) /*!< AF0: USART8 Alternate Function mapping */ +#define GPIO_AF0_CAN ((uint8_t)0x00U) /*!< AF0: CAN Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01U) /*!< AF1: USART4 Alternate Function mapping */ +#define GPIO_AF1_USART5 ((uint8_t)0x01U) /*!< AF1: USART5 Alternate Function mapping */ +#define GPIO_AF1_USART6 ((uint8_t)0x01U) /*!< AF1: USART6 Alternate Function mapping */ +#define GPIO_AF1_USART7 ((uint8_t)0x01U) /*!< AF1: USART7 Alternate Function mapping */ +#define GPIO_AF1_USART8 ((uint8_t)0x01U) /*!< AF1: USART8 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: TSC Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USART5 ((uint8_t)0x02U) /*!< AF2: USART5 Alternate Function mapping */ +#define GPIO_AF2_USART6 ((uint8_t)0x02U) /*!< AF2: USART6 Alternate Function mapping */ +#define GPIO_AF2_USART7 ((uint8_t)0x02U) /*!< AF2: USART7 Alternate Function mapping */ +#define GPIO_AF2_USART8 ((uint8_t)0x02U) /*!< AF2: USART8 Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ +#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ +#define GPIO_AF4_USART5 ((uint8_t)0x04U) /*!< AF4: USART5 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_USART6 ((uint8_t)0x05U) /*!< AF5: USART6 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030xC) +/*--------------------------- STM32F030xC ----------------------------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USART5 ((uint8_t)0x02U) /*!< AF2: USART5 Alternate Function mapping */ +#define GPIO_AF2_USART6 ((uint8_t)0x02U) /*!< AF2: USART6 Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ +#define GPIO_AF4_USART5 ((uint8_t)0x04U) /*!< AF4: USART5 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_USART6 ((uint8_t)0x05U) /*!< AF5: USART6 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F030xC */ + +#if defined (STM32F072xB) || defined (STM32F078xx) +/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ +#define GPIO_AF0_CAN ((uint8_t)0x00U) /*!< AF0: CAN Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ +#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F072xB || STM32F078xx */ + +#if defined (STM32F070xB) +/*---------------------------------- STM32F070xB ---------------------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART4 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F070xB */ + +#if defined (STM32F042x6) || defined (STM32F048xx) +/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_I2C1 ((uint8_t)0x05U) /*!< AF5: I2C1 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_USB ((uint8_t)0x05U) /*!< AF5: USB Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined (STM32F070x6) +/*--------------------------------------- STM32F070x6 ----------------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_I2C1 ((uint8_t)0x05U) /*!< AF5: I2C1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_USB ((uint8_t)0x05U) /*!< AF5: USB Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F070x6 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index +* @{ + */ +#if defined(GPIOD) && defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U : 5U) +#endif + +#if defined(GPIOD) && !defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U : 5U) +#endif + +#if !defined(GPIOD) && defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOE))? 4U : 5U) +#endif + +#if !defined(GPIOD) && !defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U : 5U) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_GPIO_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h new file mode 100644 index 0000000..3df3fc0 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h @@ -0,0 +1,809 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_I2C_H +#define STM32F0xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization + section in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \ + : ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32f0xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32f0xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F0xx_HAL_I2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h new file mode 100644 index 0000000..8679506 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h @@ -0,0 +1,174 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_I2C_EX_H +#define STM32F0xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#if defined(SYSCFG_CFGR1_I2C_FMP_PA9) +#define I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast Mode Plus on PA9 */ +#define I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast Mode Plus on PA10 */ +#else +#define I2C_FASTMODEPLUS_PA9 (uint32_t)(0x00000001U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA9 not supported */ +#define I2C_FASTMODEPLUS_PA10 (uint32_t)(0x00000002U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA10 not supported */ +#endif +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< Enable Fast Mode Plus on PB9 */ +#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1) +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C_FMP_I2C1 /*!< Enable Fast Mode Plus on I2C1 pins */ +#else +#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */ +#endif +#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2) +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C_FMP_I2C2 /*!< Enable Fast Mode Plus on I2C2 pins */ +#else +#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, + uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, + uint32_t DigitalFilter); +#if defined(I2C_CR1_WUPEN) +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +#endif +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ + ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9)) == I2C_FASTMODEPLUS_PA9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2))) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32f0xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_I2C_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h new file mode 100644 index 0000000..e716606 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h @@ -0,0 +1,189 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_PWR_H +#define __STM32F0xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0x00000000U) +#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U) +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U) +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01U) +#define PWR_STOPENTRY_WFE ((uint8_t)0x02U) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macro PWR Exported Macro + * @{ + */ + +/** @brief Check PWR flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event + * was received from the WKUP pin or from the RTC alarm (Alarm A), + * RTC Tamper event, RTC TimeStamp event or RTC Wakeup. + * An additional wakeup event is detected if the WKUP pin is enabled + * (by setting the EWUP bit) when the WKUP pin level is already high. + * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was + * resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled + * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode + * For this reason, this bit is equal to 0 after Standby or reset + * until the PVDE bit is set. + * Warning: this Flag is not available on STM32F030x8 products + * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference + * voltage VREFINT is ready. + * Warning: this Flag is not available on STM32F030x8 products + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the PWR's pending flags. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U) + + +/** + * @} + */ + +/* Include PWR HAL Extension module */ +#include "stm32f0xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_PWR_DeInit(void); + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F0xx_HAL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h new file mode 100644 index 0000000..a9ed6eb --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h @@ -0,0 +1,459 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_PWR_EX_H +#define __STM32F0xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Types PWREx Exported Types + * @{ + */ + +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level + This parameter can be a value of @ref PWREx_PVD_detection_level */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWREx_PVD_Mode */ +}PWR_PVDTypeDef; + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ + + +/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins + * @{ + */ +#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) +#define PWR_WAKEUP_PIN3 ((uint32_t)PWR_CSR_EWUP3) +#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4) +#define PWR_WAKEUP_PIN5 ((uint32_t)PWR_CSR_EWUP5) +#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6) +#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7) +#define PWR_WAKEUP_PIN8 ((uint32_t)PWR_CSR_EWUP8) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN3) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN5) || \ + ((PIN) == PWR_WAKEUP_PIN6) || \ + ((PIN) == PWR_WAKEUP_PIN7) || \ + ((PIN) == PWR_WAKEUP_PIN8)) + +#elif defined(STM32F030xC) || defined (STM32F070xB) +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) +#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4) +#define PWR_WAKEUP_PIN5 ((uint32_t)PWR_CSR_EWUP5) +#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6) +#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN5) || \ + ((PIN) == PWR_WAKEUP_PIN6) || \ + ((PIN) == PWR_WAKEUP_PIN7)) + +#elif defined(STM32F042x6) || defined (STM32F048xx) +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) +#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4) +#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6) +#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN6) || \ + ((PIN) == PWR_WAKEUP_PIN7)) + +#else +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) + + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2)) + +#endif + +/** + * @} + */ + +/** @defgroup PWREx_EXTI_Line PWREx EXTI Line + * @{ + */ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) + +#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) + +#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)EXTI_IMR_MR31) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */ + +#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) ||*/ +/** + * @} + */ + +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +/** @defgroup PWREx_PVD_detection_level PWREx PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) +/** + * @} + */ + +/** @defgroup PWREx_PVD_Mode PWREx PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_NORMAL)) +/** + * @} + */ +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +/** @defgroup PWREx_Flag PWREx Flag + * @{ + */ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) + +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF +#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC) +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF +#else +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Macros PWREx Exported Macros + * @{ + */ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +/** + * @brief Enable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) + +/** + * @brief Enable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + +/** + * @brief PVD EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_PVD) + +/** + * @brief PVD EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() EXTI->RTSR |= (PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +/** + * @brief Enable interrupt on Vddio2 Monitor Exti Line 31. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Disable interrupt on Vddio2 Monitor Exti Line 31. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Vddio2 Monitor EXTI line configuration: clear falling edge and rising edge trigger. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE() \ + do{ \ + EXTI->FTSR &= ~(PWR_EXTI_LINE_VDDIO2); \ + EXTI->RTSR &= ~(PWR_EXTI_LINE_VDDIO2); \ + } while(0) + +/** + * @brief Vddio2 Monitor EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_VDDIO2) + +/** + * @brief Check whether the specified VDDIO2 monitor EXTI interrupt flag is set or not. + * @retval EXTI VDDIO2 Monitor Line Status. + */ +#define __HAL_PWR_VDDIO2_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Clear the VDDIO2 Monitor EXTI flag. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2)) + + +#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 + * @{ + */ +/* I/O operation functions ***************************************************/ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +void HAL_PWR_PVD_IRQHandler(void); +void HAL_PWR_PVDCallback(void); +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +void HAL_PWREx_Vddio2Monitor_IRQHandler(void); +void HAL_PWREx_Vddio2MonitorCallback(void); +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/* Peripheral Control functions **********************************************/ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +void HAL_PWREx_EnableVddio2Monitor(void); +void HAL_PWREx_DisableVddio2Monitor(void); +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_PWR_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h new file mode 100644 index 0000000..4239c51 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h @@ -0,0 +1,1686 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_RCC_H +#define __STM32F0xx_HAL_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @addtogroup RCC_Private_Constants + * @{ + */ + +/** @defgroup RCC_Timeout RCC Timeout + * @{ + */ + +/* Disable Backup domain write protection state change timeout */ +#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */ +/* LSE state change timeout */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define HSI14_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#if defined(RCC_HSI48_SUPPORT) +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Register_Offset Register offsets + * @{ + */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +#define RCC_CR_OFFSET 0x00 +#define RCC_CFGR_OFFSET 0x04 +#define RCC_CIR_OFFSET 0x08 +#define RCC_BDCR_OFFSET 0x20 +#define RCC_CSR_OFFSET 0x24 + +/** + * @} + */ + + +/* CR register byte 2 (Bits[23:16]) base address */ +#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U)) + +/* CIR register byte 1 (Bits[15:8]) base address */ +#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U)) + +/* CIR register byte 2 (Bits[23:16]) base address */ +#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U)) + +/* Defines used for Flags */ +#define CR_REG_INDEX ((uint8_t)1U) +#define CR2_REG_INDEX ((uint8_t)2U) +#define BDCR_REG_INDEX ((uint8_t)3U) +#define CSR_REG_INDEX ((uint8_t)4U) + +/* Bits position in in the CFGR register */ +#define RCC_CFGR_PLLMUL_BITNUMBER 18U +#define RCC_CFGR_HPRE_BITNUMBER 4U +#define RCC_CFGR_PPRE_BITNUMBER 8U +/* Flags in the CFGR2 register */ +#define RCC_CFGR2_PREDIV_BITNUMBER 0 +/* Flags in the CR register */ +#define RCC_CR_HSIRDY_BitNumber 1 +#define RCC_CR_HSERDY_BitNumber 17 +#define RCC_CR_PLLRDY_BitNumber 25 +/* Flags in the CR2 register */ +#define RCC_CR2_HSI14RDY_BitNumber 1 +#define RCC_CR2_HSI48RDY_BitNumber 16 +/* Flags in the BDCR register */ +#define RCC_BDCR_LSERDY_BitNumber 1 +/* Flags in the CSR register */ +#define RCC_CSR_LSIRDY_BitNumber 1 +#define RCC_CSR_V18PWRRSTF_BitNumber 23 +#define RCC_CSR_RMVF_BitNumber 24 +#define RCC_CSR_OBLRSTF_BitNumber 25 +#define RCC_CSR_PINRSTF_BitNumber 26 +#define RCC_CSR_PORRSTF_BitNumber 27 +#define RCC_CSR_SFTRSTF_BitNumber 28 +#define RCC_CSR_IWDGRSTF_BitNumber 29 +#define RCC_CSR_WWDGRSTF_BitNumber 30 +#define RCC_CSR_LPWRRSTF_BitNumber 31 +/* Flags in the HSITRIM register */ +#define RCC_CR_HSITRIM_BitNumber 3 +#define RCC_HSI14TRIM_BIT_NUMBER 3 +#define RCC_FLAG_MASK ((uint8_t)0x1FU) + +/** + * @} + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) +#define IS_RCC_HSI14(__HSI14__) (((__HSI14__) == RCC_HSI14_OFF) || ((__HSI14__) == RCC_HSI14_ON) || ((__HSI14__) == RCC_HSI14_ADC_CONTROL)) +#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU) +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) +#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1) || ((__PREDIV__) == RCC_PREDIV_DIV2) || \ + ((__PREDIV__) == RCC_PREDIV_DIV3) || ((__PREDIV__) == RCC_PREDIV_DIV4) || \ + ((__PREDIV__) == RCC_PREDIV_DIV5) || ((__PREDIV__) == RCC_PREDIV_DIV6) || \ + ((__PREDIV__) == RCC_PREDIV_DIV7) || ((__PREDIV__) == RCC_PREDIV_DIV8) || \ + ((__PREDIV__) == RCC_PREDIV_DIV9) || ((__PREDIV__) == RCC_PREDIV_DIV10) || \ + ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12) || \ + ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14) || \ + ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16)) + +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \ + ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ + ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ + ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \ + ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \ + ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \ + ((__MUL__) == RCC_PLL_MUL16)) +#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ + (((__CLK__) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ + (((__CLK__) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)) +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) +#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< PLLState: The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/ + + uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Prediv_Factor */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ + + uint32_t HSI14State; /*!< The new state of the HSI14. + This parameter can be a value of @ref RCC_HSI14_Config */ + + uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + +#if defined(RCC_HSI48_SUPPORT) + uint32_t HSI48State; /*!< The new state of the HSI48. + This parameter can be a value of @ref RCC_HSI48_Config */ + +#endif /* RCC_HSI48_SUPPORT */ + RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ + +#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */ + +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE (0x00000000U) +#define RCC_OSCILLATORTYPE_HSE (0x00000001U) +#define RCC_OSCILLATORTYPE_HSI (0x00000002U) +#define RCC_OSCILLATORTYPE_LSE (0x00000004U) +#define RCC_OSCILLATORTYPE_LSI (0x00000008U) +#define RCC_OSCILLATORTYPE_HSI14 (0x00000010U) +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 (0x00000020U) +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF (0x00000000U) /*!< HSE clock deactivation */ +#define RCC_HSE_ON (0x00000001U) /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (0x00000005U) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF (0x00000000U) /*!< LSE clock deactivation */ +#define RCC_LSE_ON (0x00000001U) /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (0x00000005U) /*!< External clock source for LSE clock */ + +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF (0x00000000U) /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT (0x10U) /* Default HSI calibration trimming value */ + +/** + * @} + */ + +/** @defgroup RCC_HSI14_Config RCC HSI14 Config + * @{ + */ +#define RCC_HSI14_OFF (0x00000000U) +#define RCC_HSI14_ON RCC_CR2_HSI14ON +#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS) + +#define RCC_HSI14CALIBRATION_DEFAULT (0x10U) /* Default HSI14 calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF (0x00000000U) /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF ((uint8_t)0x00U) +#define RCC_HSI48_ON ((uint8_t)0x01U) + +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE (0x00000000U) /*!< PLL is not configured */ +#define RCC_PLL_OFF (0x00000001U) /*!< PLL deactivation */ +#define RCC_PLL_ON (0x00000002U) /*!< PLL activation */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK (0x00000001U) /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK (0x00000002U) /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 (0x00000004U) /*!< PCLK1 to configure */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NO_CLK (0x00000000U) /*!< No clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor + * @{ + */ +#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2 +#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3 +#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4 +#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5 +#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6 +#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7 +#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8 +#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9 +#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10 +#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11 +#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12 +#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13 +#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14 +#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15 +#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16 + +/** + * @} + */ + +/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor + * @{ + */ + +#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1 +#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2 +#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3 +#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4 +#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5 +#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6 +#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7 +#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8 +#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9 +#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10 +#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11 +#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12 +#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13 +#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14 +#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15 +#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16 + +/** + * @} + */ + + +/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK +#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE +#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI + +/** + * @} + */ + +/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK + +/** + * @} + */ +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 (0x00000000U) +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ + +/** + * @} + */ + +/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK +#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI +#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK +#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE +#define RCC_MCO1SOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL +#define RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCO_HSI14 + +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ +#define RCC_IT_HSI14RDY ((uint8_t)RCC_CIR_HSI14RDYF) /*!< HSI14 Ready Interrupt flag */ +#if defined(RCC_CIR_HSI48RDYF) +#define RCC_IT_HSI48RDY ((uint8_t)RCC_CIR_HSI48RDYF) /*!< HSI48 Ready Interrupt flag */ +#endif +#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: CR2 register + * - 011: BDCR register + * - 0100: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_BitNumber)) +#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_BitNumber)) +#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_BitNumber)) +/* Flags in the CR2 register */ +#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI14RDY_BitNumber)) + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_BitNumber)) +#if defined(RCC_CSR_V18PWRRSTF) +#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_V18PWRRSTF_BitNumber)) +#endif +#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_BitNumber)) +#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_BitNumber)) /*!< PIN reset flag */ +#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_BitNumber)) /*!< POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_BitNumber)) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_BitNumber)) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_BitNumber)) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_BitNumber)) /*!< Low-Power reset flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_BitNumber)) /*!< External Low Speed oscillator Ready */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN)) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN)) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN)) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) +#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN)) +#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) +#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET) +#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET) +#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) +#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) +/** + * @} + */ + + +/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) +#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) +#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN)) +#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN)) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) +#define __HAL_RCC_DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) != RESET) +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset + * @brief Force or release AHB peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST)) + +#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST)) +#define __HAL_RCC_DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST)) +#define __HAL_RCC_DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST)) +/** + * @} + */ +/** @defgroup RCC_HSI_Configuration HSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_BitNumber) + +/** + * @} + */ + +/** @defgroup RCC_LSI_Configuration LSI Configuration + * @{ + */ + +/** @brief Macro to enable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +/** @brief Macro to disable the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @} + */ + +/** @defgroup RCC_HSE_Configuration HSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON turn ON the HSE oscillator + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + }while(0U) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. + * @note Predivision factor can not be changed if PLL is used as system clock + * In this case, you have to select another source of the system clock, disable the PLL and + * then change the HSE predivision factor. + * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. + * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16. + */ +#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__)) + +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if ((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if ((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + }while(0U) + +/** + * @} + */ + +/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration + * @{ + */ + +/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14). + * @note After enabling the HSI14 with @ref __HAL_RCC_HSI14_ENABLE(), the application software + * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be + * used as system clock source. This is not necessary if @ref HAL_RCC_OscConfig() is used. + * clock cycles. + */ +#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON) + +/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14). + * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI14 can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI14. + * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON) + +/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. + */ +#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS) + +/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. + */ +#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS) + +/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI14 RC. + * @param __HSI14CALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSI14CALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CALIBRATIONVALUE__) \ + MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CALIBRATIONVALUE__) << RCC_HSI14TRIM_BIT_NUMBER) +/** + * @} + */ + +/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config + * @{ + */ + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * @param __USART1CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW))) + +/** + * @} + */ + +/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config + * @{ + */ + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * @param __I2C1CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW))) +/** + * @} + */ + +/** @defgroup RCC_PLL_Configuration PLL Configuration + * @{ + */ + +/** @brief Macro to enable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to disable the main PLL. + * @note The main PLL can not be disabled if it is used as system clock source + */ +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock + * This parameter can be one of the following values: + * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16. + * @param __PREDIV__ specifies the predivider factor for PLL VCO input clock + * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16. + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__ , __PREDIV__, __PLLMUL__) \ + do { \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSOURCE__))); \ + } while(0U) + + +/** @brief Get oscillator clock selected as PLL input clock + * @retval The clock source used for PLL entry. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) + +/** + * @} + */ + +/** @defgroup RCC_Get_Clock_source Get Clock source + * @{ + */ + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS)) + +/** + * @} + */ + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +#if defined(RCC_CFGR_MCOPRE) +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + @if STM32F042x6 + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F048xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F071xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F072xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F078xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F091xC + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F098xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F030x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F030xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F031x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F038xx + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F070x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F070xB + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @endif + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64 + * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128 + */ +#else +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source + */ +#endif +#if defined(RCC_CFGR_MCOPRE) +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) +#else + +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__)) + +#endif + +/** + * @} + */ + + /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macro to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source, + * the RTC cannot be used in STOP and STANDBY modes. + * @note The system must always be configured so as to get a PCLK frequency greater than or + * equal to the RTCCLK frequency for a proper operation of the RTC. + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + +/** @brief Macro to get the RTC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macro to enable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macro to disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macro to force the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** @brief Macros to release the Backup domain reset. + */ +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt enable + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. + * @arg @ref RCC_FLAG_HSI14RDY HSI14 oscillator clock ready + @if STM32F038xx + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F042x6 + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F048xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F058xx + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F071xB + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F072xB + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F078xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F091xC + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F098xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @endif + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. + * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset + * @arg @ref RCC_FLAG_PINRST Pin reset. + * @arg @ref RCC_FLAG_PORRST POR/PDR reset. + * @arg @ref RCC_FLAG_SFTRST Software reset. + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. + * @arg @ref RCC_FLAG_LPWRRST Low Power reset. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \ + (((__FLAG__) >> 5U) == CR2_REG_INDEX)? RCC->CR2 : \ + (((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK))) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32f0xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h new file mode 100644 index 0000000..e599e97 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h @@ -0,0 +1,2085 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_RCC_EX_H +#define __STM32F0xx_HAL_RCC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)) + +#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSI48)) + +#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI48)) + +#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ + ((SOURCE) == RCC_PLLSOURCE_HSI48) || \ + ((SOURCE) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON)) + +#else + +#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14)) +#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)) +#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ + ((SOURCE) == RCC_PLLSOURCE_HSE)) + +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI14)) + +#elif defined(RCC_CFGR_PLLNODIV) && defined(RCC_CFGR_MCO_HSI48) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI14) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI48)) + +#elif !defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI14)) + +#endif /* RCC_CFGR_PLLNODIV && !RCC_CFGR_MCO_HSI48 */ + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Constants + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) + +/** @addtogroup RCC_PLL_Clock_Source + * @{ + */ +#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV +#define RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV + +/** + * @} + */ + +/** @addtogroup RCC_Interrupt + * @{ + */ +#define RCC_IT_HSI48 RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +/** + * @} + */ + +/** @addtogroup RCC_Flag + * @{ + */ +#define RCC_FLAG_HSI48RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI48RDY_BitNumber)) +/** + * @} + */ + +/** @addtogroup RCC_System_Clock_Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI48 RCC_CFGR_SW_HSI48 +/** + * @} + */ + +/** @addtogroup RCC_System_Clock_Source_Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48 +/** + * @} + */ + +#else +/** @addtogroup RCC_PLL_Clock_Source + * @{ + */ + +#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC) +#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV +#else +#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2 +#endif + +/** + * @} + */ + +#endif /* RCC_HSI48_SUPPORT */ + +/** @addtogroup RCC_MCO_Clock_Source + * @{ + */ + +#if defined(RCC_CFGR_PLLNODIV) + +#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV) + +#endif /* RCC_CFGR_PLLNODIV */ + +#if defined(RCC_CFGR_MCO_HSI48) + +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCO_HSI48 + +#endif /* SRCC_CFGR_MCO_HSI48 */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Private Constants -------------------------------------------------------------*/ +#if defined(CRS) +/** @addtogroup RCCEx_Private_Constants + * @{ + */ + +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)) + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)) + +/** + * @} + */ +#endif /* CRS */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F030xC) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_RTC)) +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || + STM32F030xC */ + +#if defined(STM32F070x6) || defined(STM32F070xB) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB)) +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \ + RCC_PERIPHCLK_USB)) +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined(STM32F051x8) || defined(STM32F058xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC)) +#endif /* STM32F051x8 || STM32F058xx */ + +#if defined(STM32F071xB) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \ + RCC_PERIPHCLK_RTC)) +#endif /* STM32F071xB */ + +#if defined(STM32F072xB) || defined(STM32F078xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB)) +#endif /* STM32F072xB || STM32F078xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USART3 )) +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) + +#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_HSI48) || \ + ((SOURCE) == RCC_USBCLKSOURCE_PLL)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */ + +#if defined(STM32F070x6) || defined(STM32F070xB) + +#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_NONE) || \ + ((SOURCE) == RCC_USBCLKSOURCE_PLL)) + +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_HSI)) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_HSI)) +#endif /* STM32F091xC || STM32F098xx */ + + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_CECCLKSOURCE_LSE)) +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(RCC_CFGR_MCOPRE) + +#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ + ((DIV) == RCC_MCODIV_4) || ((DIV) == RCC_MCODIV_8) || \ + ((DIV) == RCC_MCODIV_16) || ((DIV) == RCC_MCODIV_32) || \ + ((DIV) == RCC_MCODIV_64) || ((DIV) == RCC_MCODIV_128)) +#else + +#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1)) + +#endif /* RCC_CFGR_MCOPRE */ + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +#if defined(CRS) + +#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \ + ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB)) +#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1) || ((_DIV_) == RCC_CRS_SYNC_DIV2) || \ + ((_DIV_) == RCC_CRS_SYNC_DIV4) || ((_DIV_) == RCC_CRS_SYNC_DIV8) || \ + ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \ + ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128)) +#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING)) +#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFFU)) +#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFFU)) +#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3FU)) +#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \ + ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN)) +#endif /* CRS */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F030xC) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || + STM32F030xC */ + +#if defined(STM32F070x6) || defined(STM32F070xB) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined(STM32F051x8) || defined(STM32F058xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F051x8 || STM32F058xx */ + +#if defined(STM32F071xB) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< USART2 clock source + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F071xB */ + +#if defined(STM32F072xB) || defined(STM32F078xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< USART2 clock source + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F072xB || STM32F078xx */ + + +#if defined(STM32F091xC) || defined(STM32F098xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< USART2 clock source + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + + uint32_t Usart3ClockSelection; /*!< USART3 clock source + This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +}RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFFU */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x3FU */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFFU */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +}RCC_CRSSynchroInfoTypeDef; + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection + * @{ + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F030xC) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_RTC (0x00010000U) + +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || + STM32F030xC */ + +#if defined(STM32F070x6) || defined(STM32F070xB) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USB (0x00020000U) + +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USB (0x00020000U) + +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined(STM32F051x8) || defined(STM32F058xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) + +#endif /* STM32F051x8 || STM32F058xx */ + +#if defined(STM32F071xB) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_USART2 (0x00000002U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) + +#endif /* STM32F071xB */ + +#if defined(STM32F072xB) || defined(STM32F078xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_USART2 (0x00000002U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USB (0x00020000U) + +#endif /* STM32F072xB || STM32F078xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_USART2 (0x00000002U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USART3 (0x00040000U) + +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) + +/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source + * @{ + */ +#define RCC_USBCLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48 /*!< HSI48 clock selected as USB clock source */ +#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */ + +/** + * @} + */ + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */ + +#if defined(STM32F070x6) || defined(STM32F070xB) + +/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source + * @{ + */ +#define RCC_USBCLKSOURCE_NONE (0x00000000U) /*!< USB clock disabled */ +#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */ + +/** + * @} + */ + +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source + * @{ + */ +#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK +#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK +#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE +#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI + +/** + * @} + */ + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source + * @{ + */ +#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK +#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK +#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE +#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI + +/** + * @} + */ + +#endif /* STM32F091xC || STM32F098xx */ + + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source + * @{ + */ +#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244 +#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE + +/** + * @} + */ + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +/** @defgroup RCCEx_MCOx_Clock_Prescaler RCCEx MCOx Clock Prescaler + * @{ + */ + +#if defined(RCC_CFGR_MCOPRE) + +#define RCC_MCODIV_1 (0x00000000U) +#define RCC_MCODIV_2 (0x10000000U) +#define RCC_MCODIV_4 (0x20000000U) +#define RCC_MCODIV_8 (0x30000000U) +#define RCC_MCODIV_16 (0x40000000U) +#define RCC_MCODIV_32 (0x50000000U) +#define RCC_MCODIV_64 (0x60000000U) +#define RCC_MCODIV_128 (0x70000000U) + +#else + +#define RCC_MCODIV_1 (0x00000000U) + +#endif /* RCC_CFGR_MCOPRE */ + +/** + * @} + */ + +/** @defgroup RCCEx_LSEDrive_Configuration RCC LSE Drive Configuration + * @{ + */ + +#define RCC_LSEDRIVE_LOW (0x00000000U) /*!< Xtal mode lower driving capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Status RCCEx CRS Status + * @{ + */ +#define RCC_CRS_NONE (0x00000000U) +#define RCC_CRS_TIMEOUT (0x00000001U) +#define RCC_CRS_SYNCOK (0x00000002U) +#define RCC_CRS_SYNCWARN (0x00000004U) +#define RCC_CRS_SYNCERR (0x00000008U) +#define RCC_CRS_SYNCMISS (0x00000010U) +#define RCC_CRS_TRIMOVF (0x00000020U) + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS Synchronization Source + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO (0x00000000U) /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS Synchronization Divider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 (0x00000000U) /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS Synchronization Polarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING (0x00000000U) /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS Default Reload Value + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT (0x0000BB7FU) /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS Default Error Limit Value + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT (0x00000022U) /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS Default HSI48 Calibration vakye + * @{ + */ +#define RCC_CRS_HSI48CALIBRATION_DEFAULT (0x00000020U) /*!< The default value is 32, which corresponds to the middle of the trimming interval. + The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value + corresponds to a higher output frequency */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS Frequency Error Direction + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP (0x00000000U) /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(GPIOD) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN)) + +#endif /* GPIOD */ + +#if defined(GPIOE) + +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN)) + +#endif /* GPIOE */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TSC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN)) + +#endif /* STM32F091xC || STM32F098xx */ + +/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || STM32F070x6 || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) + +#endif /* STM32F031x6 || STM32F038xx || */ + /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030x8) \ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) + +#endif /* STM32F030x8 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) + +#endif /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN)) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) + +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F072xB || STM32F078xx || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRS_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CRSEN)) + +#endif /* CRS */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/** @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ +#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_USART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN)) +#define __HAL_RCC_USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN)) + +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + + +/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset + * @brief Forces or releases peripheral reset. + * @{ + */ + +/** @brief Force or release AHB peripheral reset. + */ +#if defined(GPIOD) + +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST)) + +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST)) + +#endif /* GPIOD */ + +#if defined(GPIOE) + +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST)) + +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST)) + +#endif /* GPIOE */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST)) + +#define __HAL_RCC_TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +/** @brief Force or release APB1 peripheral reset. + */ +#if defined(STM32F030x8) \ + || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) + +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) + +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) + +#endif /* STM32F031x6 || STM32F038xx || */ + /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030x8) \ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) + +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) + +#endif /* STM32F030x8 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) + +#define __HAL_RCC_DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) + +#endif /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) + +#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_USART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART4RST)) + +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST)) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) + +#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST)) + +#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F072xB || STM32F078xx || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST)) + +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +#define __HAL_RCC_CRS_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CRSRST)) + +#define __HAL_RCC_CRS_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CRSRST)) + +#endif /* CRS */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST)) + +#define __HAL_RCC_USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + + +/** @brief Force or release APB2 peripheral reset. + */ +#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST)) + +#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) + +#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST)) +#define __HAL_RCC_USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST)) + +#define __HAL_RCC_USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST)) +#define __HAL_RCC_USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST)) + +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +/** @brief AHB Peripheral Clock Enable Disable Status + */ +#if defined(GPIOD) + +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET) + +#endif /* GPIOD */ + +#if defined(GPIOE) + +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET) + +#endif /* GPIOE */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TSC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) != RESET) +#define __HAL_RCC_TSC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx */ + +/** @brief APB1 Peripheral Clock Enable Disable Status + */ +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || STM32F070x6 || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) + +#endif /* STM32F031x6 || STM32F038xx || */ + /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030x8) \ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) + +#endif /* STM32F030x8 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DAC1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) != RESET) +#define __HAL_RCC_DAC1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) == RESET) + +#endif /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_USART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_USART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) == RESET) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) + +#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET) +#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F072xB || STM32F078xx || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +#define __HAL_RCC_CRS_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) != RESET) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) == RESET) + +#endif /* CRS */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) != RESET) +#define __HAL_RCC_USART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/** @brief APB1 Peripheral Clock Enable Disable Status + */ +#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_USART7_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) != RESET) +#define __HAL_RCC_USART8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) != RESET) +#define __HAL_RCC_USART7_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) == RESET) +#define __HAL_RCC_USART8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx */ +/** + * @} + */ + + +/** @defgroup RCCEx_HSI48_Enable_Disable RCCEx HSI48 Enable Disable + * @brief Macros to enable or disable the Internal 48Mhz High Speed oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI48 can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI14. + * @note After enabling the HSI48 with __HAL_RCC_HSI48_ENABLE(), the application software + * should wait on HSI48RDY flag to be set indicating that HSI48 clock is stable and can be + * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used. + * @note When the HSI48 is stopped, HSI48RDY flag goes low after 6 HSI48 oscillator + * clock cycles. + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) + +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI48ON) +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON) + +/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_HSI48_ON HSI48 enabled + * @arg @ref RCC_HSI48_OFF HSI48 disabled + */ +#define __HAL_RCC_GET_HSI48_STATE() \ + (((uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48ON)) != RESET) ? RCC_HSI48_ON : RCC_HSI48_OFF) + +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config + * @{ + */ +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F070x6) || defined(STM32F070xB) + +/** @brief Macro to configure the USB clock (USBCLK). + * @param __USBCLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: +@if STM32F070xB +@elseif STM32F070x6 +@else + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock +@endif + * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock + */ +#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, (uint32_t)(__USBCLKSOURCE__)) + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: +@if STM32F070xB +@elseif STM32F070x6 +@else + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock +@endif + * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW))) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F072xB || STM32F078xx || */ + /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +/** @brief Macro to configure the CEC clock. + * @param __CECCLKSOURCE__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_CEC_CONFIG(__CECCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSOURCE__)) + +/** @brief Macro to get the HDMI CEC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW))) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || defined(STM32F098xx) */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) +/** @brief Macro to configure the USART2 clock (USART2CLK). + * @param __USART2CLKSOURCE__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG(__USART2CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSOURCE__)) + +/** @brief Macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW))) +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/ + +#if defined(STM32F091xC) || defined(STM32F098xx) +/** @brief Macro to configure the USART3 clock (USART3CLK). + * @param __USART3CLKSOURCE__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG(__USART3CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSOURCE__)) + +/** @brief Macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW))) + +#endif /* STM32F091xC || STM32F098xx */ +/** + * @} + */ + +/** @defgroup RCCEx_LSE_Configuration LSE Drive Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->BDCR,\ + RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) )) + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_IT_And_Flag RCCEx IT and Flag + * @{ + */ +/* Interrupt & Flag management */ + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != RESET) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != RESET) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0U) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != RESET) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0U) + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after prescaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +#if defined(CRS) + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_RCC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h new file mode 100644 index 0000000..0f57c73 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h @@ -0,0 +1,2125 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_TIM_H +#define STM32F0xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode + This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode + This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + uint32_t LockLevel; /*!< TIM Lock level + This parameter can be a value of @ref TIM_Lock_level */ + uint32_t DeadTime; /*!< TIM dead Time + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint32_t BreakState; /*!< TIM Break State + This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + uint32_t BreakPolarity; /*!< TIM Break input polarity + This parameter can be a value of @ref TIM_Break_Polarity */ + uint32_t BreakFilter; /*!< Specifies the break input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event + (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder +mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__HANDLE__)->Instance->CCR4)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + (__HANDLE__)->ChannelState[3]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32f0xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h new file mode 100644 index 0000000..23f6642 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h @@ -0,0 +1,268 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_TIM_EX_H +#define STM32F0xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM14_GPIO (0x00000000U) /*!< TIM14 TI1 is connected to GPIO */ +#define TIM_TIM14_RTC (0x00000001U) /*!< TIM14 TI1 is connected to RTC_clock */ +#define TIM_TIM14_HSE (0x00000002U) /*!< TIM14 TI1 is connected to HSE/32U */ +#define TIM_TIM14_MCO (0x00000003U) /*!< TIM14 TI1 is connected to MCO */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__INSTANCE__, __REMAP__) \ + (((__INSTANCE__) == TIM14) && (((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F0xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c new file mode 100644 index 0000000..94a482a --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c @@ -0,0 +1,514 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs categories: + (+) HAL Initialization and de-initialization functions + (+) HAL Control functions + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief STM32F0xx HAL Driver version number V1.7.5 + */ +#define __STM32F0xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F0xx_HAL_VERSION_SUB1 (0x07) /*!< [23:16] sub1 version */ +#define __STM32F0xx_HAL_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */ +#define __STM32F0xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F0xx_HAL_VERSION ((__STM32F0xx_HAL_VERSION_MAIN << 24U)\ + |(__STM32F0xx_HAL_VERSION_SUB1 << 16U)\ + |(__STM32F0xx_HAL_VERSION_SUB2 << 8U )\ + |(__STM32F0xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK (0x00000FFFU) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface, the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed + and the backup domain when enabled. + (+) de-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __Weak + to make override possible in case of other implementations in user file. + +@endverbatim + * @{ + */ + +/** + * @brief This function configures the Flash prefetch, + * Configures time base source, NVIC and Low level hardware + * @note This function is called at the beginning of program after reset and before + * the clock configuration + * @note The time base configuration is based on HSI clock when exiting from Reset. + * Once done, time base tick start incrementing. + * In the default implementation,Systick is used as source of time base. + * The tick variable is incremented each 1ms in its ISR. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + + HAL_InitTick(TICK_INT_PRIORITY); + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initialize common part of the HAL and stops the SysTick + * of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __Weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) + { + return HAL_ERROR; + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during Sleep mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note ThiS function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) + +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief This method returns the HAL revision + * @retval version 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32F0xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> 16U); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c new file mode 100644 index 0000000..cbe3f5b --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c @@ -0,0 +1,341 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M0 exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + -@- Negative value of IRQn_Type are not allowed. + + + [..] + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x03). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined + inside the stm32f0xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number . + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to stm32f0xx.h file) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 3. + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * with stm32f0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0 based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn,PreemptPriority); +} + +/** + * @brief Enables a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disables a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiates a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK) functionalities. + + +@endverbatim + * @{ + */ + + +/** + * @brief Gets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn) +{ + /* Get priority for Cortex-M system or device specific interrupts */ + return NVIC_GetPriority(IRQn); +} + +/** + * @brief Sets Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Gets Pending Interrupt (reads the pending register in the NVIC + * and returns the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clears the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Configures the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief This function handles SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c new file mode 100644 index 0000000..b7f91a4 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c @@ -0,0 +1,901 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to Reference manual for connection between peripherals + and DMA requests . + + (#) For a given Channel, program the required configuration through the following parameters: + Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode, + using HAL_DMA_Init() function. + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_Channel_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of DMA handle structure). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp = 0U; + + /* Check the DMA handle allocation */ + if(NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + + /* Initialize DmaBaseAddress and ChannelIndex parameters used + by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ + DMA_CalcBaseAndBitshift(hdma); + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if(NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Reset DMA Channel Number of Data to Transfer register */ + hdma->Instance->CNDTR = 0U; + + /* Reset DMA Channel peripheral address register */ + hdma->Instance->CPAR = 0U; + + /* Reset DMA Channel memory address register */ + hdma->Instance->CMAR = 0U; + +/* Get DMA Base Address */ + DMA_CalcBaseAndBitshift(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Reset the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Reset the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief I/O operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + hdma->Instance->CCR |= DMA_CCR_EN; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete, & transfer error interrupts */ + /* Half transfer interrupt is optional: enable it only if associated callback is available */ + if(NULL != hdma->XferHalfCpltCallback ) + { + hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + } + else + { + hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_TE); + hdma->Instance->CCR &= ~DMA_IT_HT; + } + + /* Enable the Peripheral */ + hdma->Instance->CCR |= DMA_CCR_EN; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + if(hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + + /* Disable the channel */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex); + } + /* Change the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Abort the DMA Transfer in Interrupt mode. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + + /* Disable DMA IT */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + + /* Disable the channel */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart = 0U; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC)) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << hdma->ChannelIndex; + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << hdma->ChannelIndex; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(RESET == (hdma->DmaBaseAddress->ISR & temp)) + { + if(RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State= HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + if(HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex; + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if ((RESET != (flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_HT))) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + hdma->Instance->CCR &= ~DMA_IT_HT; + } + + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex; + + /* DMA peripheral state is not updated in Half Transfer */ + /* State is updated only in Transfer Complete case */ + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((RESET != (flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TC))) + { + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete & transfer error interrupts */ + /* if the DMA mode is not CIRCULAR */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_TE); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management ***************************************/ + else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Then, disable all DMA interrupts */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } +} + +/** + * @brief Register callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Returns the DMA state. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + return hdma->State; +} + +/** + * @brief Return the DMA error code + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Set the DMA Transfer parameters. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @brief set the DMA base address and channel index depending on DMA instance + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) +{ +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + /* calculation of the channel index */ + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; +#endif +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @} + */ + + /** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c new file mode 100644 index 0000000..1adb8f7 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c @@ -0,0 +1,559 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two different + interrupts pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + EXTI->RTSR |= maskline; + } + else + { + EXTI->RTSR &= ~maskline; + } + + /* Configure falling trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + EXTI->FTSR |= maskline; + } + else + { + EXTI->FTSR &= ~maskline; + } + + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + EXTI->IMR |= maskline; + } + else + { + EXTI->IMR &= ~maskline; + } + + /* Configure event mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + EXTI->EMR |= maskline; + } + else + { + EXTI->EMR &= ~maskline; + } + + return HAL_OK; +} + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + + /* Check if selected line is enable */ + if ((EXTI->IMR & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + /* Check if selected line is enable */ + if ((EXTI->EMR & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + /* Check if configuration of selected line is enable */ + if ((EXTI->RTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + } + + /* Get falling configuration */ + /* Check if configuration of selected line is enable */ + if ((EXTI->FTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); + } + else + { + pExtiConfig->GPIOSel = 0x00u; + } + } + else + { + /* No Trigger selected */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + } + + return HAL_OK; +} + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + EXTI->IMR = (EXTI->IMR & ~maskline); + + /* 2] Clear event mode */ + EXTI->EMR = (EXTI->EMR & ~maskline); + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + EXTI->RTSR = (EXTI->RTSR & ~maskline); + EXTI->FTSR = (EXTI->FTSR & ~maskline); + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t maskline; + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending bit */ + regval = (EXTI->PR & maskline); + if (regval != 0x00u) + { + /* Clear pending bit */ + EXTI->PR = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* return 1 if bit is set else 0 */ + regval = ((EXTI->PR & maskline) >> linepos); + return regval; +} + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Clear Pending bit */ + EXTI->PR = maskline; +} + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Generate Software interrupt */ + EXTI->SWIER = maskline; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c new file mode 100644 index 0000000..94ad6e9 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c @@ -0,0 +1,694 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Prefetch on I-Code + (+) Option Bytes programming + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32F0xx devices. + + (#) FLASH Memory I/O Programming functions: this group includes all needed + functions to erase and program the main memory: + (++) Lock and Unlock the FLASH interface + (++) Erase function: Erase page, erase all pages + (++) Program functions: half word, word and doubleword + (#) FLASH Option Bytes Programming functions: this group includes all needed + functions to manage the Option Bytes: + (++) Lock and Unlock the Option Bytes + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Launch the Option Bytes loader + (++) Erase Option Bytes + (++) Program the data Option Bytes + (++) Get the Write protection. + (++) Get the user option bytes. + + (#) Interrupts and flags management functions : this group + includes all needed functions to: + (++) Handle FLASH interrupts + (++) Wait for last FLASH operation according to its status + (++) Get error flag status + + [..] In addition to these function, this driver includes a set of macros allowing + to handle the following operations: + + (+) Set/Get the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro ---------------------------- ---------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); +static void FLASH_SetErrorCode(void); +extern void FLASH_PageErase(uint32_t PageAddress); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim +@endverbatim + * @{ + */ + +/** + * @brief Program halfword, word or double word at a specified address + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @note FLASH should be previously erased before new programming (only exception to this + * is when 0x0000 is programmed) + * + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifie the address to be programmed. + * @param Data Specifie the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint8_t index = 0U; + uint8_t nbiterations = 0U; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + /* Program halfword (16-bit) at a specified address. */ + nbiterations = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /* Program word (32-bit = 2*16-bit) at a specified address. */ + nbiterations = 2U; + } + else + { + /* Program double word (64-bit = 4*16-bit) at a specified address. */ + nbiterations = 4U; + } + + for (index = 0U; index < nbiterations; index++) + { + FLASH_Program_HalfWord((Address + (2U*index)), (uint16_t)(Data >> (16U*index))); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); + /* In case of error, stop programming procedure */ + if (status != HAL_OK) + { + break; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program halfword, word or double word at a specified address with interrupt enabled. + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifie the address to be programmed. + * @param Data Specifie the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + pFlash.Address = Address; + pFlash.Data = Data; + + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD; + /* Program halfword (16-bit) at a specified address. */ + pFlash.DataRemaining = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD; + /* Program word (32-bit : 2*16-bit) at a specified address. */ + pFlash.DataRemaining = 2U; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD; + /* Program double word (64-bit : 4*16-bit) at a specified address. */ + pFlash.DataRemaining = 4U; + } + + /* Program halfword (16-bit) at a specified address. */ + FLASH_Program_HalfWord(Address, (uint16_t)Data); + + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t addresstmp = 0U; + + /* Check FLASH operation error flags */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + /* Return the faulty address */ + addresstmp = pFlash.Address; + /* Reset address */ + pFlash.Address = 0xFFFFFFFFU; + + /* Save the Error code */ + FLASH_SetErrorCode(); + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(addresstmp); + + /* Stop the procedure ongoing */ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + + /* Process can continue only if no error detected */ + if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still pages to erase */ + if(pFlash.DataRemaining != 0U) + { + addresstmp = pFlash.Address; + /*Indicate user which sector has been erased */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + + /*Increment sector number*/ + addresstmp = pFlash.Address + FLASH_PAGE_SIZE; + pFlash.Address = addresstmp; + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + FLASH_PageErase(addresstmp); + } + else + { + /* No more pages to Erase, user callback can be called. */ + /* Reset Sector and stop Erase pages procedure */ + pFlash.Address = addresstmp = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + } + } + else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /* Operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(0); + + /* Stop Mass Erase procedure*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + else + { + /* Nb of 16-bit data to program can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still 16-bit data to program */ + if(pFlash.DataRemaining != 0U) + { + /* Increment address to 16-bit */ + pFlash.Address += 2; + addresstmp = pFlash.Address; + + /* Shift to have next 16-bit data */ + pFlash.Data = (pFlash.Data >> 16U); + + /* Operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); + + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); + } + else + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2U); + } + else + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6U); + } + + /* Reset Address and stop Program procedure */ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + } + } + + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { + /* Operation is completed, disable the PG, PER and MER Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); + + /* Disable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which has been erased + * (if 0xFFFFFFFF, it means that all the selected pages have been erased) + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which returned an error + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* Verify Flash is unlocked */ + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Locks the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE)) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE); + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @note This function will reset automatically the MCU. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the OBL_Launch bit to launch the option byte loading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* Wait for last operation to be completed */ + return(FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE)); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions + * @brief Peripheral errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be: + * @ref FLASH_Error_Codes + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Program a half-word (16-bit) at a specified address. + * @param Address specify the address to be programmed. + * @param Data specify the data to be programmed. + * @retval None + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Proceed to program the new data */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Write data in the address */ + *(__IO uint16_t*)Address = Data; +} + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) + { + if (Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* There is no error flag set */ + return HAL_OK; +} + + +/** + * @brief Set the specific FLASH error flag. + * @retval None + */ +static void FLASH_SetErrorCode(void) +{ + uint32_t flags = 0U; + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; + flags |= FLASH_FLAG_WRPERR; + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG; + flags |= FLASH_FLAG_PGERR; + } + /* Clear FLASH error pending bits */ + __HAL_FLASH_CLEAR_FLAG(flags); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c new file mode 100644 index 0000000..7c30632 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c @@ -0,0 +1,984 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the FLASH peripheral: + * + Extended Initialization/de-initialization functions + * + Extended I/O operation functions + * + Extended Peripheral Control functions + * + @verbatim + ============================================================================== + ##### Flash peripheral extended features ##### + ============================================================================== + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32F0xxx devices. It includes + + (++) Set/Reset the write protection + (++) Program the user Option Bytes + (++) Get the Read protection Level + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @addtogroup FLASH + * @{ + */ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_POSITION_IWDGSW_BIT 8U +#define FLASH_POSITION_OB_USERDATA0_BIT 16U +#define FLASH_POSITION_OB_USERDATA1_BIT 24U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +/* Erase operations */ +static void FLASH_MassErase(void); +void FLASH_PageErase(uint32_t PageAddress); + +/* Option bytes control */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig); +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data); +static uint32_t FLASH_OB_GetWRP(void); +static uint32_t FLASH_OB_GetRDP(void); +static uint8_t FLASH_OB_GetUser(void); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions + * @brief FLASH Memory Erasing functions + * +@verbatim + ============================================================================== + ##### FLASH Erasing Programming functions ##### + ============================================================================== + + [..] The FLASH Memory Erasing functions, includes the following functions: + (+) @ref HAL_FLASHEx_Erase: return only when erase has been done + (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback + is called with parameter 0xFFFFFFFF + + [..] Any operation of erase should follow these steps: + (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and + program memory access. + (#) Call the desired function to erase page. + (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access + (recommended to protect the FLASH memory against possible unwanted operation). + +@endverbatim + * @{ + */ + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] PageError pointer to variable that + * contains the configuration information on faulty page in case of error + * (0xFFFFFFFF means that all the pages have been correctly erased) + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t address = 0U; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass Erase requested for Bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Mass erase to be done*/ + FLASH_MassErase(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + } + } + else + { + /* Page Erase is requested */ + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + + /* Page Erase requested on address located on bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + /* Erase page by page to be done*/ + for(address = pEraseInit->PageAddress; + address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress); + address += FLASH_PAGE_SIZE) + { + FLASH_PageErase(address); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = address; + break; + } + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* If procedure already ongoing, reject the next one */ + if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; + FLASH_MassErase(); + } + else + { + /* Erase by page to be done*/ + + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + + pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE; + pFlash.DataRemaining = pEraseInit->NbPages; + pFlash.Address = pEraseInit->PageAddress; + + /*Erase 1st page and wait for IT*/ + FLASH_PageErase(pEraseInit->PageAddress); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions + * @brief Option Bytes Programming functions + * +@verbatim + ============================================================================== + ##### Option Bytes Programming functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + option bytes operations. + +@endverbatim + * @{ + */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_FLASHEx_OBErase(void) +{ + uint8_t rdptmp = OB_RDP_LEVEL_0; + HAL_StatusTypeDef status = HAL_ERROR; + + /* Get the actual read protection Option Byte value */ + rdptmp = FLASH_OB_GetRDP(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Restore the last read protection Option Byte value */ + status = FLASH_OB_RDP_LevelConfig(rdptmp); + } + } + + /* Return the erase status */ + return status; +} + +/** + * @brief Program option bytes + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Write protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /* Enable of Write protection on the selected page */ + status = FLASH_OB_EnableWRP(pOBInit->WRPPage); + } + else + { + /* Disable of Write protection on the selected page */ + status = FLASH_OB_DisableWRP(pOBInit->WRPPage); + } + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) + { + status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* USER configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) + { + status = FLASH_OB_UserConfig(pOBInit->USERConfig); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* DATA configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA) + { + status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER; + + /*Get WRP*/ + pOBInit->WRPPage = FLASH_OB_GetWRP(); + + /*Get RDP Level*/ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /*Get USER*/ + pOBInit->USERConfig = FLASH_OB_GetUser(); +} + +/** + * @brief Get the Option byte user data + * @param DATAAdress Address of the option byte DATA + * This parameter can be one of the following values: + * @arg @ref OB_DATA_ADDRESS_DATA0 + * @arg @ref OB_DATA_ADDRESS_DATA1 + * @retval Value programmed in USER data + */ +uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress) +{ + uint32_t value = 0U; + + if (DATAAdress == OB_DATA_ADDRESS_DATA0) + { + /* Get value programmed in OB USER Data0 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT; + } + else + { + /* Get value programmed in OB USER Data1 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT; + } + + return value; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Full erase of FLASH memory Bank + * + * @retval None + */ +static void FLASH_MassErase(void) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Only bank1 will be erased*/ + SET_BIT(FLASH->CR, FLASH_CR_MER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @brief Enable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write protected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFFU; +#if defined(OB_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFFU; +#endif /* OB_WRP1_WRP1 */ +#if defined(OB_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFFU; +#endif /* OB_WRP2_WRP2 */ +#if defined(OB_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFFU; +#endif /* OB_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be protected ******/ + WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage)); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES48TO63MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES48TO63MASK */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + /* Enable write protection */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(OB_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 &= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP0_WRP0 */ + +#if defined(OB_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 &= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP1_WRP1 */ + +#if defined(OB_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 &= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP2_WRP2 */ + +#if defined(OB_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 &= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Disable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write unprotected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFFU; +#if defined(OB_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFFU; +#endif /* OB_WRP1_WRP1 */ +#if defined(OB_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFFU; +#endif /* OB_WRP2_WRP2 */ +#if defined(OB_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFFU; +#endif /* OB_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be unprotected ******/ + WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES48TO63MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES48TO63MASK */ + + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(OB_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 &= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP0_WRP0 */ + +#if defined(OB_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 &= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP1_WRP1 */ + +#if defined(OB_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 &= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP2_WRP2 */ + +#if defined(OB_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 &= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + return status; +} + +/** + * @brief Set the read protection level. + * @param ReadProtectLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + * @note Warning: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + + WRITE_REG(OB->RDP, ReadProtectLevel); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Program the FLASH User Option Byte. + * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param UserConfig The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4), + * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6). + * For few devices, following option bytes are available: nBOOT0(Bit3) & BOOT_SEL(Bit7). + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW))); + assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST))); + assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST))); + assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET))); + assert_param(IS_OB_VDDA_ANALOG((UserConfig&OB_VDDA_ANALOG_ON))); + assert_param(IS_OB_SRAM_PARITY((UserConfig&OB_SRAM_PARITY_RESET))); +#if defined(FLASH_OBR_BOOT_SEL) + assert_param(IS_OB_BOOT_SEL((UserConfig&OB_BOOT_SEL_SET))); + assert_param(IS_OB_BOOT0((UserConfig&OB_BOOT0_SET))); +#endif /* FLASH_OBR_BOOT_SEL */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_OBR_BOOT_SEL) + OB->USER = UserConfig; +#else + OB->USER = (UserConfig | 0x88U); +#endif + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + + return status; +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param Address specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data specifies the data to be programmed. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enables the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @retval The FLASH Write Protection Option Bytes value + */ +static uint32_t FLASH_OB_GetWRP(void) +{ + /* Return the FLASH write protection Register value */ + return (uint32_t)(READ_REG(FLASH->WRPR)); +} + +/** + * @brief Returns the FLASH Read Protection level. + * @retval FLASH RDP level + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t tmp_reg; + + /* Read RDP level bits */ + tmp_reg = READ_BIT(FLASH->OBR, (FLASH_OBR_RDPRT1 | FLASH_OBR_RDPRT2)); + + if (tmp_reg == 0U) + { + return OB_RDP_LEVEL_0; + } + else if ((tmp_reg & FLASH_OBR_RDPRT2) == FLASH_OBR_RDPRT2) + { + return OB_RDP_LEVEL_2; + } + else + { + return OB_RDP_LEVEL_1; + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4), + * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6). + * For few devices, following option bytes are available: nBOOT0(Bit3) & BOOT_SEL(Bit7). + */ +static uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Erase the specified FLASH memory page + * @param PageAddress FLASH page to erase + * The value of this parameter depend on device used within the same series + * + * @retval None + */ +void FLASH_PageErase(uint32_t PageAddress) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Proceed to erase the page */ + SET_BIT(FLASH->CR, FLASH_CR_PER); + WRITE_REG(FLASH->AR, PageAddress); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c new file mode 100644 index 0000000..2c43ff5 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c @@ -0,0 +1,543 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 28 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function : __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) HAL_GPIO_DeInit allows to set register values to their reset value. It's also + recommended to use it to unconfigure pin which was used as an external interrupt + or in event mode. That's the only way to reset corresponding bit in EXTI & SYSCFG + registers. + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PF0 and PF1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..] + * which may be out of array bounds [..,UNKNOWN] in following APIs: + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup GPIO_Private_Defines GPIO Private Defines + * @{ + */ +#define GPIO_MODE (0x00000003U) +#define EXTI_MODE (0x10000000U) +#define GPIO_MODE_IT (0x00010000U) +#define GPIO_MODE_EVT (0x00020000U) +#define RISING_EDGE (0x00100000U) +#define FALLING_EDGE (0x00200000U) +#define GPIO_OUTPUT_TYPE (0x00000010U) + +#define GPIO_NUMBER (16U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT_0 << position) ; + temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position); + GPIOx->OTYPER = temp; + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u)); + temp |= ((GPIO_Init->Pull) << (position * 2u)); + GPIOx->PUPDR = temp; + + /* In case of Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODER0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << (4u * (position & 0x03u))); + temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); + SYSCFG->EXTICR[position >> 2u] = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->IMR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + temp |= iocurrent; + } + EXTI->IMR = temp; + + temp = EXTI->EMR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + temp |= iocurrent; + } + EXTI->EMR = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + temp |= iocurrent; + } + EXTI->RTSR = temp; + + temp = EXTI->FTSR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + temp |= iocurrent; + } + EXTI->FTSR = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = SYSCFG->EXTICR[position >> 2u]; + tmp &= (0x0FuL << (4u * (position & 0x03u))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~((uint32_t)iocurrent); + EXTI->EMR &= ~((uint32_t)iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR &= ~((uint32_t)iocurrent); + EXTI->FTSR &= ~((uint32_t)iocurrent); + + /* Configure the External Interrupt or event for the current IO */ + tmp = 0x0FuL << (4u * (position & 0x03u)); + SYSCFG->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO Direction in Input Floating Mode */ + GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((uint32_t)(position & 0x07u) * 4u)) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u)); + + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; + } + +/** + * @brief Set or clear the selected data port bit. + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the pin to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Ouput Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Locks GPIO Pins configuration registers. +* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, +* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. +* @note The configuration of the locked GPIO pins can no longer be modified +* until the next reset. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bits to be locked. +* This parameter can be any combination of GPIO_Pin_x where x can be (0..15). +* @retval None +*/ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + SET_BIT(tmp, GPIO_Pin); + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c new file mode 100644 index 0000000..3523403 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c @@ -0,0 +1,6646 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition, an then permit a call the same master sequential interface + several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT() + or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential + interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() + or using @ref HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT() + or using @ref HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can + add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). + (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT() + or using @ref HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT() + or using @ref HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + @ref HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + @ref HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + @ref HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + @ref HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback(). + [..] + Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit() + or @ref HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SlaveAddr_SHIFT 7U +#define SlaveAddr_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + hi2c->Instance->CR2 = (I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Normal use case for Transmitter mode */ + /* A NACK is generated to confirm the end of transfer */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + return HAL_ERROR; + } + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (I2C_Trials == Trials) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +/** + * @brief This function handles I2C Communication Timeout. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + return HAL_OK; + } + else + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles Acknowledge failed detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Wait until STOP Flag is reset */ + /* AutoEnd should be initiate after AF */ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ + (hi2c->XferISR == I2C_Slave_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK, and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c new file mode 100644 index 0000000..a1e3f60 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c @@ -0,0 +1,333 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32F0xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + (+) Configure Wake Up Feature + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#if defined(I2C_CR1_WUPEN) + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c new file mode 100644 index 0000000..558d869 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c @@ -0,0 +1,454 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization function + * + Peripheral Control function + * + @verbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + After reset, the backup domain (RTC registers, RTC backup data + registers) is protected against possible unwanted + write accesses. + To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() macro. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @brief Enables access to the backup domain (RTC registers, RTC + * backup data registers when present). + * @note If the HSE divided by 32 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + PWR->CR |= (uint32_t)PWR_CR_DBP; +} + +/** + * @brief Disables access to the backup domain (RTC registers, RTC + * backup data registers when present). + * @note If the HSE divided by 32 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + PWR->CR &= ~((uint32_t)PWR_CR_DBP); +} + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is + forced in input pull down configuration and is active on rising edges. + (+) There are two WakeUp pins, and up to eight Wakeup pins on STM32F07x & STM32F09x devices. + (++)WakeUp Pin 1 on PA.00. + (++)WakeUp Pin 2 on PC.13. + (++)WakeUp Pin 3 on PE.06.(STM32F07x/STM32F09x) + (++)WakeUp Pin 4 on PA.02.(STM32F07x/STM32F09x) + (++)WakeUp Pin 5 on PC.05.(STM32F07x/STM32F09x) + (++)WakeUp Pin 6 on PB.05.(STM32F07x/STM32F09x) + (++)WakeUp Pin 7 on PB.15.(STM32F07x/STM32F09x) + (++)WakeUp Pin 8 on PF.02.(STM32F07x/STM32F09x) + + *** Low Power modes configuration *** + ===================================== + [..] + The devices feature 3 low-power modes: + (+) Sleep mode: Cortex-M0 core stopped, peripherals kept running. + (+) Stop mode: all clocks are stopped, regulator running, regulator + in low power mode + (+) Standby mode: 1.2V domain powered off (mode not available on STM32F0x8 devices). + + *** Sleep mode *** + ================== + [..] + (+) Entry: + The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx) + functions with + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + + (+) Exit: + (++) Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + + *** Stop mode *** + ================= + [..] + In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI, + and the HSE RC oscillators are disabled. Internal SRAM and register contents + are preserved. + The voltage regulator can be configured either in normal or low-power mode. + To minimize the consumption. + + (+) Entry: + The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI ) + function with: + (++) Main regulator ON. + (++) Low Power regulator ON. + (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction + (+) Exit: + (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + (++) Some specific communication peripherals (CEC, USART, I2C) interrupts, + when programmed in wakeup mode (the peripheral must be + programmed in wakeup mode and the corresponding interrupt vector + must be enabled in the NVIC) + + *** Standby mode *** + ==================== + [..] + The Standby mode allows to achieve the lowest power consumption. It is based + on the Cortex-M0 deep sleep mode, with the voltage regulator disabled. + The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and + the HSE oscillator are also switched off. SRAM and register contents are lost + except for the RTC registers, RTC backup registers and Standby circuitry. + The voltage regulator is OFF. + + (+) Entry: + (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. + (+) Exit: + (++) WKUP pin rising edge, RTC alarm (Alarm A), RTC wakeup, + tamper event, time-stamp event, external reset in NRST pin, IWDG reset. + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC + Wakeup event, a tamper event, a time-stamp event, or a comparator event, + without depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop and Standby modes + + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to + configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to configure the RTC to detect the tamper or time stamp event using the + HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions. + + (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to + configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() function. + + (+) Comparator auto-wakeup (AWU) from the Stop mode + + (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to: + (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for comparator 2) + to be sensitive to to the selected edges (falling, rising or falling + and rising) (Interrupt or Event modes) using the EXTI_Init() function. + (+++) Configure the comparator to generate the event. +@endverbatim + * @{ + */ + +/** + * @brief Enables the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to enable. + * This parameter can be value of : + * @ref PWREx_WakeUp_Pins + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Enable the EWUPx pin */ + SET_BIT(PWR->CSR, WakeUpPinx); +} + +/** + * @brief Disables the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. + * This parameter can be values of : + * @ref PWREx_WakeUp_Pins + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Disable the EWUPx pin */ + CLEAR_BIT(PWR->CSR, WakeUpPinx); +} + +/** + * @brief Enters Sleep mode. + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * @param Regulator Specifies the regulator state in SLEEP mode. + * On STM32F0 devices, this parameter is a dummy value and it is ignored + * as regulator can't be modified in this mode. Parameter is kept for platform + * compatibility. + * @param SLEEPEntry Specifies if SLEEP mode is entered with WFI or WFE instruction. + * When WFI entry is used, tick interrupt have to be disabled if not desired as + * the interrupt wake up source. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + +/** + * @brief Enters STOP mode. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * @param Regulator Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON + * @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON + * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction + * @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg = PWR->CR; + + /* Clear PDDS and LPDS bits */ + tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS); + + /* Set LPDS bit according to Regulator value */ + tmpreg |= Regulator; + + /* Store the new value */ + PWR->CR = tmpreg; + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* Select STOP mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Enters STANDBY mode. + * @note In Standby mode, all I/O pins are high impedance except for: + * - Reset pad (still available) + * - RTC alternate function pins if configured for tamper, time-stamp, RTC + * Alarm out, or RTC clock calibration out. + * - WKUP pins if enabled. + * STM32F0x8 devices, the Stop mode is available, but it is + * aningless to distinguish between voltage regulator in Low power + * mode and voltage regulator in Run mode because the regulator + * not used and the core is supplied directly from an external source. + * Consequently, the Standby mode is not available on those devices. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Select STANDBY mode */ + PWR->CR |= (uint32_t)PWR_CR_PDDS; + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + + +/** + * @brief Enables CORTEX M4 SEVONPEND bit. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disables CORTEX M4 SEVONPEND bit. + * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c new file mode 100644 index 0000000..c14370b --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c @@ -0,0 +1,274 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWREx HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWREx_Private_Constants PWREx Private Constants + * @{ + */ +#define PVD_MODE_IT (0x00010000U) +#define PVD_MODE_EVT (0x00020000U) +#define PVD_RISING_EDGE (0x00000001U) +#define PVD_FALLING_EDGE (0x00000002U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions + * @brief Extended Peripheral Control functions + * +@verbatim + + =============================================================================== + ##### Peripheral extended control functions ##### + =============================================================================== + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). + (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line16 and can generate an interrupt if enabled. This is done through + HAL_PWR_ConfigPVD(), HAL_PWR_EnablePVD() functions. + (+) The PVD is stopped in Standby mode. + -@- PVD is not available on STM32F030x4/x6/x8 + + *** VDDIO2 Monitor Configuration *** + ==================================== + [..] + (+) VDDIO2 monitor is used to monitor the VDDIO2 power supply by comparing it + to VREFInt Voltage + (+) This monitor is internally connected to the EXTI line31 + and can generate an interrupt if enabled. This is done through + HAL_PWREx_EnableVddio2Monitor() function. + -@- VDDIO2 is available on STM32F07x/09x/04x + +@endverbatim + * @{ + */ + +#if defined (STM32F031x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F091xC) || \ + defined (STM32F042x6) || defined (STM32F072xB) +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration + * information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @retval None + */ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } +} + +/** + * @brief Enables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + PWR->CR |= (uint32_t)PWR_CR_PVDE; +} + +/** + * @brief Disables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + PWR->CR &= ~((uint32_t)PWR_CR_PVDE); +} + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler() or PVD_VDDIO2_IRQHandler(). + * @retval None + */ +void HAL_PWR_PVD_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PWR Exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); + } +} + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PWR_PVDCallback could be implemented in the user file + */ +} + +#endif /* defined (STM32F031x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F091xC) || */ + /* defined (STM32F042x6) || defined (STM32F072xB) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +/** + * @brief Enable VDDIO2 monitor: enable Exti 31 and falling edge detection. + * @note If Exti 31 is enable correlty and VDDIO2 voltage goes below Vrefint, + an interrupt is generated Irq line 1. + NVIS has to be enable by user. + * @retval None + */ +void HAL_PWREx_EnableVddio2Monitor(void) +{ + __HAL_PWR_VDDIO2_EXTI_ENABLE_IT(); + __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE(); +} + +/** + * @brief Disable the Vddio2 Monitor. + * @retval None + */ +void HAL_PWREx_DisableVddio2Monitor(void) +{ + __HAL_PWR_VDDIO2_EXTI_DISABLE_IT(); + __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE(); + +} + +/** + * @brief This function handles the PWR Vddio2 monitor interrupt request. + * @note This API should be called under the VDDIO2_IRQHandler() PVD_VDDIO2_IRQHandler(). + * @retval None + */ +void HAL_PWREx_Vddio2Monitor_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_VDDIO2_EXTI_GET_FLAG() != RESET) + { + /* PWR Vddio2 monitor interrupt user callback */ + HAL_PWREx_Vddio2MonitorCallback(); + + /* Clear PWR Exti pending bit */ + __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG(); + } +} + +/** + * @brief PWR Vddio2 Monitor interrupt callback + * @retval None + */ +__weak void HAL_PWREx_Vddio2MonitorCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PWREx_Vddio2MonitorCallback could be implemented in the user file + */ +} + +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c new file mode 100644 index 0000000..fbe2bf5 --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c @@ -0,0 +1,1365 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is disabled, + and all peripherals are off except internal SRAM, Flash and JTAG. + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in input floating state, except the JTAG pins which + are assigned to be used for debug purpose. + [..] Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals whose clocks are not + derived from the System clock (RTC, ADC, I2C, USART, TIM, USB FS, etc..) + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC +* @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, HSI14, HSI48, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, + AHB and APB1). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + The HSI clock can be used also to clock the USART and I2C peripherals. + + (#) HSI14 (high-speed internal), 14 MHz factory-trimmed RC used directly to clock + the ADC peripheral. + + (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL (clocked by HSI, HSI48 or HSE), featuring different output clocks: + (++) The first output is used to generate the high speed system clock (up to 48 MHz) + (++) The second output is used to generate the clock for the USB FS (48 MHz) + (++) The third output may be used to generate the clock for the TIM, I2C and USART + peripherals (up to 48 MHz) + + (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() + and if a HSE clock failure occurs(HSE used directly or through PLL as System + clock source), the System clocks automatically switched to HSI and an interrupt + is generated if enabled. The interrupt is linked to the Cortex-M0 NMI + (Non-Maskable Interrupt) exception vector. + + (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL + clock (divided by 2) output on pin (such as PA8 pin). + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) clock is derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + (#) All the peripheral clocks are derived from the System clock (SYSCLK) except: + (++) The FLASH program/erase clock which is always HSI 8MHz clock. + (++) The USB 48 MHz clock which is derived from the PLL VCO clock. + (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE. + (++) The I2C clock which can be derived as well from HSI 8MHz clock. + (++) The ADC clock which is derived from PLL output. + (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC + (HSE divided by a programmable prescaler). The System clock (SYSCLK) + frequency must be higher or equal to the RTC clock frequency. + (++) IWDG clock which is always the LSI clock. + + (#) For the STM32F0xx devices, the maximum frequency of the SYSCLK, HCLK and PCLK1 is 48 MHz, + Depending on the SYSCLK frequency, the flash latency should be adapted accordingly. + + (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and + prefetch is disabled. + @endverbatim + * @{ + */ + +/* + Additional consideration on the SYSCLK based on Latency settings: + +-----------------------------------------------+ + | Latency | SYSCLK clock frequency (MHz) | + |---------------|-------------------------------| + |0WS(1CPU cycle)| 0 < SYSCLK <= 24 | + |---------------|-------------------------------| + |1WS(2CPU cycle)| 24 < SYSCLK <= 48 | + +-----------------------------------------------+ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE and PLL OFF + * - AHB, APB1 prescaler set to 1. + * - CSS and MCO1 OFF + * - All interrupts disabled + * - All interrupt and reset flags cleared + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Set HSION bit, HSITRIM[4:0] bits to the reset value*/ + SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0] and MCOSEL[2:0] bits */ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE | RCC_CFGR_MCO); + + /* Wait till HSI as SYSCLK status is enabled */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Update the SystemCoreClock global variable for HSI as system clock source */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Reset HSEON, CSSON, PLLON bits */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON); + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Get start tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLLRDY is cleared */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Reset CFGR2 register */ + CLEAR_REG(RCC->CFGR2); + + /* Reset CFGR3 register */ + CLEAR_REG(RCC->CFGR3); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIR); + + /* Clear all reset flags */ + __HAL_RCC_CLEAR_RESET_FLAGS(); + + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t pll_config; + uint32_t pll_config2; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI))) + { + /* When HSI is used as system clock it will not disabled */ + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*----------------------------- HSI14 Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue)); + + /* Check the HSI14 State */ + if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON) + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET) + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + } + else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL) + { + /* Enable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_ENABLE(); + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + } + else + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET) + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + +#if defined(RCC_HSI48_SUPPORT) + /*----------------------------- HSI48 Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* When the HSI48 is used as system clock it is not allowed to be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI48) || + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI48))) + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET) && (RCC_OscInitStruct->HSI48State != RCC_HSI48_ON)) + { + return HAL_ERROR; + } + } + else + { + /* Check the HSI48 State */ + if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + { + /* Enable the Internal High Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal High Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } +#endif /* RCC_HSI48_SUPPORT */ + + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, predivider and multiplication factor. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PREDIV, + RCC_OscInitStruct->PLL.PLLMUL); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->CFGR; + pll_config2 = RCC->CFGR2; + if((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV) || + (READ_BIT(pll_config, RCC_CFGR_PLLMUL) != RCC_OscInitStruct->PLL.PLLMUL)) + { + return HAL_ERROR; + } + } + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * The value of this parameter depend on device used within the same series + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + return HAL_ERROR; + } + } +#if defined(RCC_CFGR_SWS_HSI48) + /* HSI48 is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48) + { + /* Check the HSI48 ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET) + { + return HAL_ERROR; + } + } +#endif /* RCC_CFGR_SWS_HSI48 */ + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + return HAL_ERROR; + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER]; + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick (TICK_INT_PRIORITY); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * + @verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + + @endverbatim + * @{ + */ + +#if defined(RCC_CFGR_MCOPRE) +/** + * @brief Selects the clock source to output on MCO pin. + * @note MCO pin should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + @if STM32F042x6 + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F048xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F071xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F072xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F078xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F091xC + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F098xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F030x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F030xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F031x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F038xx + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F070x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F070xB + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @endif + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param RCC_MCODiv specifies the MCO DIV. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock + * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock + * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock + * @retval None + */ +#else +/** + * @brief Selects the clock source to output on MCO pin. + * @note MCO pin should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param RCC_MCODiv specifies the MCO DIV. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @retval None + */ +#endif +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef gpio; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* Configure the MCO1 pin in alternate function mode */ + gpio.Mode = GPIO_MODE_AF_PP; + gpio.Speed = GPIO_SPEED_FREQ_HIGH; + gpio.Pull = GPIO_NOPULL; + gpio.Pin = MCO1_PIN; + gpio.Alternate = GPIO_AF0_MCO; + + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + + HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio); + + /* Configure the MCO clock source */ + __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv); +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0 NMI (Non-Maskable Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Returns the SYSCLK frequency + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) + * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) or depending on STM32F0xxxx devices either a value based + * on HSI_VALUE divided by 2 or HSI_VALUE divided by PREDIV factor(*) multiplied by the + * PLL factor. + * @note (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + const uint8_t aPLLMULFactorTable[16] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U, + 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U}; + const uint8_t aPredivFactorTable[16] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U, + 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U}; + + uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; + uint32_t sysclockfreq = 0U; + + tmpreg = RCC->CFGR; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + { + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + break; + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER]; + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER]; + if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSE_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); + } +#if defined(RCC_CFGR_PLLSRC_HSI48_PREDIV) + else if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSI48) + { + /* HSI48 used as PLL clock source : PLLCLK = HSI48/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSI48_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); + } +#endif /* RCC_CFGR_PLLSRC_HSI48_PREDIV */ + else + { +#if (defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)) + /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSI_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); +#else + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((uint64_t) (HSI_VALUE >> 1U) * ((uint64_t) pllmul)); +#endif + } + sysclockfreq = pllclk; + break; + } +#if defined(RCC_CFGR_SWS_HSI48) + case RCC_SYSCLKSOURCE_STATUS_HSI48: /* HSI48 used as system clock source */ + { + sysclockfreq = HSI48_VALUE; + break; + } +#endif /* RCC_CFGR_SWS_HSI48 */ + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: /* HSI used as system clock */ + { + sysclockfreq = HSI_VALUE; + break; + } + } + return sysclockfreq; +} + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE) >> RCC_CFGR_PPRE_BITNUMBER]); +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \ + | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI14; +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType |= RCC_OSCILLATORTYPE_HSI48; +#endif /* RCC_HSI48_SUPPORT */ + + + /* Get the HSE configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_BitNumber); + + /* Get the LSE configuration -----------------------------------------------*/ + if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + /* Get the HSI14 configuration -----------------------------------------------*/ + if((RCC->CR2 & RCC_CR2_HSI14ON) == RCC_CR2_HSI14ON) + { + RCC_OscInitStruct->HSI14State = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSI14State = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSI14CalibrationValue = (uint32_t)((RCC->CR2 & RCC_CR2_HSI14TRIM) >> RCC_HSI14TRIM_BIT_NUMBER); + +#if defined(RCC_HSI48_SUPPORT) + /* Get the HSI48 configuration if any-----------------------------------------*/ + RCC_OscInitStruct->HSI48State = __HAL_RCC_GET_HSI48_STATE(); +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the PLL configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL); + RCC_OscInitStruct->PLL.PREDIV = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV); +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * contains the current clock configuration. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != NULL); + assert_param(pFLatency != NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE); + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = __HAL_FLASH_GET_LATENCY(); +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if(__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c new file mode 100644 index 0000000..7771bce --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c @@ -0,0 +1,964 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + Extended Clock Recovery System Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/** @defgroup RCCEx RCCEx + * @brief RCC Extension HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(CRS) +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +/* Bit position in register */ +#define CRS_CFGR_FELIM_BITNUMBER 16 +#define CRS_CR_TRIM_BITNUMBER 8 +#define CRS_ISR_FECAP_BITNUMBER 16 +/** + * @} + */ +#endif /* CRS */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) are set to their reset values. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks + * (USART, RTC, I2C, CEC and USB). + * + * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t temp_reg = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*---------------------------- RTC configuration -------------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + FlagStatus pwrclkchanged = RESET; + + /* As soon as function is called to change RTC clock source, activation of the + power domain is done. */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = temp_reg; + + /* Wait for LSERDY if LSE was enabled */ + if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON)) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*------------------------------- USART1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + /*----------------------------- USART2 Configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + /*----------------------------- USART3 Configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } +#endif /* STM32F091xC || STM32F098xx */ + + /*------------------------------ I2C1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6) + /*------------------------------ USB Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + } +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + /*------------------------------ CEC clock Configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + + return HAL_OK; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks + * (USART, RTC, I2C, CEC and USB). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + /* Common part first */ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC; + /* Get the RTC configuration --------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + /* Get the USART1 clock configuration --------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART2; + /* Get the USART2 clock source ---------------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART3; + /* Get the USART3 clock source ---------------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; + /* Get the USB clock source ---------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC; + /* Get the CEC clock source ------------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +} + +/** + * @brief Returns the peripheral clock frequency + * @note Returns 0 if peripheral clock is unknown + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + @if STM32F042x6 + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F048xx + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F051x8 + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F058xx + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F070x6 + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F070xB + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F071xB + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F072xB + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F078xx + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F091xC + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F098xx + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + * @retval Frequency in Hz (0: means that no available frequency for the peripheral) + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + /* frequency == 0 : means that no available frequency for the peripheral */ + uint32_t frequency = 0U; + + uint32_t srcclk = 0U; +#if defined(USB) + uint32_t pllmull = 0U, pllsource = 0U, predivfactor = 0U; +#endif /* USB */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + switch (PeriphClk) + { + case RCC_PERIPHCLK_RTC: + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + /* Check if LSE is ready and if RTC clock selection is LSE */ + if ((srcclk == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready and if RTC clock selection is LSI */ + else if ((srcclk == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) + { + frequency = LSI_VALUE; + } + /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/ + else if ((srcclk == RCC_RTCCLKSOURCE_HSE_DIV32) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY))) + { + frequency = HSE_VALUE / 32U; + } + break; + } + case RCC_PERIPHCLK_USART1: + { + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + /* Check if USART1 clock selection is PCLK1 */ + if (srcclk == RCC_USART1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + /* Check if HSI is ready and if USART1 clock selection is HSI */ + else if ((srcclk == RCC_USART1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if USART1 clock selection is SYSCLK */ + else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + /* Check if LSE is ready and if USART1 clock selection is LSE */ + else if ((srcclk == RCC_USART1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#if defined(RCC_CFGR3_USART2SW) + case RCC_PERIPHCLK_USART2: + { + /* Get the current USART2 source */ + srcclk = __HAL_RCC_GET_USART2_SOURCE(); + + /* Check if USART2 clock selection is PCLK1 */ + if (srcclk == RCC_USART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + /* Check if HSI is ready and if USART2 clock selection is HSI */ + else if ((srcclk == RCC_USART2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if USART2 clock selection is SYSCLK */ + else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + /* Check if LSE is ready and if USART2 clock selection is LSE */ + else if ((srcclk == RCC_USART2CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#endif /* RCC_CFGR3_USART2SW */ +#if defined(RCC_CFGR3_USART3SW) + case RCC_PERIPHCLK_USART3: + { + /* Get the current USART3 source */ + srcclk = __HAL_RCC_GET_USART3_SOURCE(); + + /* Check if USART3 clock selection is PCLK1 */ + if (srcclk == RCC_USART3CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + /* Check if HSI is ready and if USART3 clock selection is HSI */ + else if ((srcclk == RCC_USART3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if USART3 clock selection is SYSCLK */ + else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + /* Check if LSE is ready and if USART3 clock selection is LSE */ + else if ((srcclk == RCC_USART3CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#endif /* RCC_CFGR3_USART3SW */ + case RCC_PERIPHCLK_I2C1: + { + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + /* Check if HSI is ready and if I2C1 clock selection is HSI */ + if ((srcclk == RCC_I2C1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if I2C1 clock selection is SYSCLK */ + else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + break; + } +#if defined(USB) + case RCC_PERIPHCLK_USB: + { + /* Get the current USB source */ + srcclk = __HAL_RCC_GET_USB_SOURCE(); + + /* Check if PLL is ready and if USB clock selection is PLL */ + if ((srcclk == RCC_USBCLKSOURCE_PLL) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))) + { + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMUL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = (pllmull >> RCC_CFGR_PLLMUL_BITNUMBER) + 2U; + predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1U; + + if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV) + { + /* HSE used as PLL clock source : frequency = HSE/PREDIV * PLLMUL */ + frequency = (HSE_VALUE/predivfactor) * pllmull; + } +#if defined(RCC_CR2_HSI48ON) + else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV) + { + /* HSI48 used as PLL clock source : frequency = HSI48/PREDIV * PLLMUL */ + frequency = (HSI48_VALUE / predivfactor) * pllmull; + } +#endif /* RCC_CR2_HSI48ON */ + else + { +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F072xB) || defined(STM32F070xB) + /* HSI used as PLL clock source : frequency = HSI/PREDIV * PLLMUL */ + frequency = (HSI_VALUE / predivfactor) * pllmull; +#else + /* HSI used as PLL clock source : frequency = HSI/2U * PLLMUL */ + frequency = (HSI_VALUE >> 1U) * pllmull; +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB */ + } + } +#if defined(RCC_CR2_HSI48ON) + /* Check if HSI48 is ready and if USB clock selection is HSI48 */ + else if ((srcclk == RCC_USBCLKSOURCE_HSI48) && (HAL_IS_BIT_SET(RCC->CR2, RCC_CR2_HSI48RDY))) + { + frequency = HSI48_VALUE; + } +#endif /* RCC_CR2_HSI48ON */ + break; + } +#endif /* USB */ +#if defined(CEC) + case RCC_PERIPHCLK_CEC: + { + /* Get the current CEC source */ + srcclk = __HAL_RCC_GET_CEC_SOURCE(); + + /* Check if HSI is ready and if CEC clock selection is HSI */ + if ((srcclk == RCC_CECCLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if LSE is ready and if CEC clock selection is LSE */ + else if ((srcclk == RCC_CECCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#endif /* CEC */ + default: + { + break; + } + } + return(frequency); +} + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function @ref HAL_RCCEx_CRSConfig which + (+++) Reset CRS registers to their default values. + (+++) Configure CRS registers with synchronization configuration + (+++) Enable automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function @ref HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + @ref HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (RCC_IRQn/RCC_IRQHandler) + (++) Call function @ref HAL_RCCEx_CRSConfig() + (++) Enable RCC_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (@ref __HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) @ref HAL_RCCEx_CRS_SyncOkCallback() + (+++) @ref HAL_RCCEx_CRS_SyncWarnCallback() + (+++) @ref HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) @ref HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function @ref HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling @ref HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_BITNUMBER); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_BITNUMBER)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_BITNUMBER); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_BITNUMBER); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** +* @brief Wait for CRS Synchronization status. +* @param Timeout Duration of the timeout +* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization +* frequency. +* @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. +* @retval Combination of Synchronization status +* This parameter can be a combination of the following values: +* @arg @ref RCC_CRS_TIMEOUT +* @arg @ref RCC_CRS_SYNCOK +* @arg @ref RCC_CRS_SYNCWARN +* @arg @ref RCC_CRS_SYNCERR +* @arg @ref RCC_CRS_SYNCMISS +* @arg @ref RCC_CRS_TRIMOVF +*/ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart = 0U; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } while(RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if(((itflags & RCC_CRS_FLAG_SYNCOK) != RESET) && ((itsources & RCC_CRS_IT_SYNCOK) != RESET)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if(((itflags & RCC_CRS_FLAG_SYNCWARN) != RESET) && ((itsources & RCC_CRS_IT_SYNCWARN) != RESET)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if(((itflags & RCC_CRS_FLAG_ESYNC) != RESET) && ((itsources & RCC_CRS_IT_ESYNC) != RESET)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if(((itflags & RCC_CRS_FLAG_ERR) != RESET) && ((itsources & RCC_CRS_IT_ERR) != RESET)) + { + if((itflags & RCC_CRS_FLAG_SYNCERR) != RESET) + { + crserror |= RCC_CRS_SYNCERR; + } + if((itflags & RCC_CRS_FLAG_SYNCMISS) != RESET) + { + crserror |= RCC_CRS_SYNCMISS; + } + if((itflags & RCC_CRS_FLAG_TRIMOVF) != RESET) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c new file mode 100644 index 0000000..4ecd84b --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c @@ -0,0 +1,7433 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_TIM_RegisterCallback() to register a callback. + @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_ALL: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + default: + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + default: + break; + } + + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK are relevant only for timer instances + * supporting a break input. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + case TIM_CLEARINPUTSOURCE_OCREFCLR: + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + } + break; + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + break; + } + + default: + break; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */ + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */ + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */ + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */ + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */ + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */ + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */ + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */ + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */ + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + break; + } + return HAL_OK; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */ +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c new file mode 100644 index 0000000..fe9102a --- /dev/null +++ b/LED/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c @@ -0,0 +1,2308 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM14, the parameter can have the following values: + * @arg TIM_TIM14_GPIO: TIM14 TI1 is connected to GPIO + * @arg TIM_TIM14_RTC: TIM14 TI1 is connected to RTC_clock + * @arg TIM_TIM14_HSE: TIM14 TI1 is connected to HSE/32 + * @arg TIM_TIM14_MCO: TIM14 TI1 is connected to MCO + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + __HAL_LOCK(htim); + + /* Check parameters */ + assert_param(IS_TIM_REMAP(htim->Instance, Remap)); + + /* Set the Timer remapping configuration */ + WRITE_REG(htim->Instance->OR, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/LED/LED Debug.launch b/LED/LED Debug.launch new file mode 100644 index 0000000..da243dc --- /dev/null +++ b/LED/LED Debug.launch @@ -0,0 +1,72 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/LED/LED.ioc b/LED/LED.ioc new file mode 100644 index 0000000..2bb7e8f --- /dev/null +++ b/LED/LED.ioc @@ -0,0 +1,123 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +KeepUserPlacement=false +Mcu.Family=STM32F0 +Mcu.IP0=NVIC +Mcu.IP1=RCC +Mcu.IP2=SYS +Mcu.IPNb=3 +Mcu.Name=STM32F030F4Px +Mcu.Package=TSSOP20 +Mcu.Pin0=PF0-OSC_IN +Mcu.Pin1=PF1-OSC_OUT +Mcu.Pin10=PA10 +Mcu.Pin11=PA13 +Mcu.Pin12=PA14 +Mcu.Pin13=VP_SYS_VS_Systick +Mcu.Pin2=PA0 +Mcu.Pin3=PA1 +Mcu.Pin4=PA2 +Mcu.Pin5=PA5 +Mcu.Pin6=PA6 +Mcu.Pin7=PA7 +Mcu.Pin8=PB1 +Mcu.Pin9=PA9 +Mcu.PinsNb=14 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32F030F4Px +MxCube.Version=6.1.0 +MxDb.Version=DB.6.0.10 +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +PA0.GPIOParameters=GPIO_PuPd,GPIO_Label +PA0.GPIO_Label=IN1 +PA0.GPIO_PuPd=GPIO_PULLUP +PA0.Locked=true +PA0.Signal=GPIO_Input +PA1.GPIOParameters=GPIO_PuPd,GPIO_Label +PA1.GPIO_Label=IN2 +PA1.GPIO_PuPd=GPIO_PULLUP +PA1.Locked=true +PA1.Signal=GPIO_Input +PA10.Locked=true +PA10.Signal=USART1_RX +PA13.Mode=Serial_Wire +PA13.Signal=SYS_SWDIO +PA14.Locked=true +PA14.Mode=Serial_Wire +PA14.Signal=SYS_SWCLK +PA2.GPIOParameters=GPIO_Speed,GPIO_Label +PA2.GPIO_Label=LED +PA2.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +PA2.Locked=true +PA2.Signal=GPIO_Output +PA5.GPIOParameters=GPIO_Speed,GPIO_Label +PA5.GPIO_Label=TEN +PA5.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +PA5.Locked=true +PA5.Signal=GPIO_Output +PA6.GPIOParameters=GPIO_PuPd,GPIO_Label +PA6.GPIO_Label=Button +PA6.GPIO_PuPd=GPIO_PULLUP +PA6.Locked=true +PA6.Signal=GPIO_Input +PA7.GPIOParameters=GPIO_Speed,GPIO_Label +PA7.GPIO_Label=Relay1 +PA7.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +PA7.Locked=true +PA7.Signal=GPIO_Output +PA9.Locked=true +PA9.Signal=USART1_TX +PB1.GPIOParameters=GPIO_Speed,GPIO_Label +PB1.GPIO_Label=Relay2 +PB1.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +PB1.Locked=true +PB1.Signal=GPIO_Output +PF0-OSC_IN.Locked=true +PF0-OSC_IN.Mode=HSE-External-Oscillator +PF0-OSC_IN.Signal=RCC_OSC_IN +PF1-OSC_OUT.Locked=true +PF1-OSC_OUT.Mode=HSE-External-Oscillator +PF1-OSC_OUT.Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32F030F4Px +ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.2 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=LED.ioc +ProjectManager.ProjectName=LED +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=STM32CubeIDE +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false +RCC.FamilyName=M +RCC.IPParameters=FamilyName,PLLCLKFreq_Value,TimSysFreq_Value +RCC.PLLCLKFreq_Value=8000000 +RCC.TimSysFreq_Value=8000000 +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom +isbadioc=false diff --git a/LED/STM32F030F4PX_FLASH.ld b/LED/STM32F030F4PX_FLASH.ld new file mode 100644 index 0000000..495986e --- /dev/null +++ b/LED/STM32F030F4PX_FLASH.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F030F4Px Device from STM32F0 series + * 16Kbytes FLASH + * 4Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 4K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 16K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/Maple/.cproject b/Maple/.cproject new file mode 100644 index 0000000..4884b6b --- /dev/null +++ b/Maple/.cproject @@ -0,0 +1,184 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Maple/.mxproject b/Maple/.mxproject new file mode 100644 index 0000000..206aa56 --- /dev/null +++ b/Maple/.mxproject @@ -0,0 +1,37 @@ +[PreviousLibFiles] +LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_armv8mbl.h; + +[PreviousUsedCubeIDEFiles] +SourceFiles=Core/Src/main.c;USB_DEVICE/App/usb_device.c;USB_DEVICE/Target/usbd_conf.c;USB_DEVICE/App/usbd_desc.c;USB_DEVICE/App/usbd_cdc_if.c;Core/Src/stm32f1xx_it.c;Core/Src/stm32f1xx_hal_msp.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;Core/Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;Core/Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c; +HeaderPath=Drivers/STM32F1xx_HAL_Driver/Inc;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;Middlewares/ST/STM32_USB_Device_Library/Core/Inc;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc;Drivers/CMSIS/Device/ST/STM32F1xx/Include;Drivers/CMSIS/Include;USB_DEVICE/App;USB_DEVICE/Target;Core/Inc; +CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=7 +HeaderFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App/usb_device.h +HeaderFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/Target/usbd_conf.h +HeaderFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App/usbd_desc.h +HeaderFiles#3=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App/usbd_cdc_if.h +HeaderFiles#4=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Inc/stm32f1xx_it.h +HeaderFiles#5=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Inc/stm32f1xx_hal_conf.h +HeaderFiles#6=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Inc/main.h +HeaderFolderListSize=3 +HeaderPath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App +HeaderPath#1=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/Target +HeaderPath#2=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Inc +HeaderFiles=; +SourceFileListSize=7 +SourceFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App/usb_device.c +SourceFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/Target/usbd_conf.c +SourceFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App/usbd_desc.c +SourceFiles#3=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App/usbd_cdc_if.c +SourceFiles#4=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Src/stm32f1xx_it.c +SourceFiles#5=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Src/stm32f1xx_hal_msp.c +SourceFiles#6=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Src/main.c +SourceFolderListSize=3 +SourcePath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/App +SourcePath#1=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/USB_DEVICE/Target +SourcePath#2=/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/Core/Src +SourceFiles=; + diff --git a/Maple/.project b/Maple/.project new file mode 100644 index 0000000..4a2f603 --- /dev/null +++ b/Maple/.project @@ -0,0 +1,33 @@ + + + Maple + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + com.st.stm32cube.ide.mcu.MCUProjectNature + com.st.stm32cube.ide.mcu.MCUCubeProjectNature + org.eclipse.cdt.core.cnature + com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature + com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature + com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature + com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature + com.st.stm32cube.ide.mcu.MCURootProjectNature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/Maple/.settings/language.settings.xml b/Maple/.settings/language.settings.xml new file mode 100644 index 0000000..84e5201 --- /dev/null +++ b/Maple/.settings/language.settings.xml @@ -0,0 +1,27 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Maple/.settings/stm32cubeide.project.prefs b/Maple/.settings/stm32cubeide.project.prefs new file mode 100644 index 0000000..ef0747d --- /dev/null +++ b/Maple/.settings/stm32cubeide.project.prefs @@ -0,0 +1,3 @@ +8DF89ED150041C4CBC7CB9A9CAA90856=51483313B38AA38BB37804E008776955 +DC22A860405A8BF2F2C095E5B6529F12=51483313B38AA38BB37804E008776955 +eclipse.preferences.version=1 diff --git a/Maple/Core/Inc/main.h b/Maple/Core/Inc/main.h new file mode 100644 index 0000000..5fb4ed1 --- /dev/null +++ b/Maple/Core/Inc/main.h @@ -0,0 +1,75 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define LED_Pin GPIO_PIN_1 +#define LED_GPIO_Port GPIOB +#define USBE_Pin GPIO_PIN_9 +#define USBE_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Core/Inc/stm32f1xx_hal_conf.h b/Maple/Core/Inc/stm32f1xx_hal_conf.h new file mode 100644 index 0000000..5d277ba --- /dev/null +++ b/Maple/Core/Inc/stm32f1xx_hal_conf.h @@ -0,0 +1,391 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_CONF_H +#define __STM32F1xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED + /*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_CAN_MODULE_ENABLED */ +/*#define HAL_CAN_LEGACY_MODULE_ENABLED */ +/*#define HAL_CEC_MODULE_ENABLED */ +/*#define HAL_CORTEX_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_DMA_MODULE_ENABLED */ +/*#define HAL_ETH_MODULE_ENABLED */ +/*#define HAL_FLASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/*#define HAL_I2C_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/*#define HAL_HCD_MODULE_ENABLED */ +/*#define HAL_PWR_MODULE_ENABLED */ +/*#define HAL_RCC_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SD_MODULE_ENABLED */ +/*#define HAL_MMC_MODULE_ENABLED */ +/*#define HAL_SDRAM_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SRAM_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_UART_MODULE_ENABLED */ +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ + +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 8U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32f1xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32f1xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32f1xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32f1xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED +#include "stm32f1xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED +#include "stm32f1xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "Legacy/stm32f1xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32f1xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32f1xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32f1xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32f1xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32f1xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32f1xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED +#include "stm32f1xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED +#include "stm32f1xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32f1xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32f1xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32f1xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32f1xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32f1xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED +#include "stm32f1xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED +#include "stm32f1xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32f1xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32f1xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32f1xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32f1xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32f1xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32f1xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32f1xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32f1xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32f1xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32f1xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED +#include "stm32f1xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t* file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Core/Inc/stm32f1xx_it.h b/Maple/Core/Inc/stm32f1xx_it.h new file mode 100644 index 0000000..1e9e0da --- /dev/null +++ b/Maple/Core/Inc/stm32f1xx_it.h @@ -0,0 +1,71 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f1xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_IT_H +#define __STM32F1xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +void USB_HP_CAN1_TX_IRQHandler(void); +void USB_LP_CAN1_RX0_IRQHandler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Core/Src/main.c b/Maple/Core/Src/main.c new file mode 100644 index 0000000..92f6511 --- /dev/null +++ b/Maple/Core/Src/main.c @@ -0,0 +1,219 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "usb_device.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +#include "usbd_cdc_if.h" +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USB_DEVICE_Init(); + /* USER CODE BEGIN 2 */ + HAL_GPIO_WritePin(USBE_GPIO_Port, USBE_Pin, GPIO_PIN_RESET); + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_SET); + HAL_Delay(500); + HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET); + HAL_Delay(500); + + char msg[]="Hallo\n"; + CDC_Transmit_FS((uint8_t*)msg, strlen(msg)); + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOB, LED_Pin|USBE_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pins : LED_Pin USBE_Pin */ + GPIO_InitStruct.Pin = LED_Pin|USBE_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Core/Src/stm32f1xx_hal_msp.c b/Maple/Core/Src/stm32f1xx_hal_msp.c new file mode 100644 index 0000000..5386cb0 --- /dev/null +++ b/Maple/Core/Src/stm32f1xx_hal_msp.c @@ -0,0 +1,88 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f1xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_AFIO_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled + */ + __HAL_AFIO_REMAP_SWJ_NOJTAG(); + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Core/Src/stm32f1xx_it.c b/Maple/Core/Src/stm32f1xx_it.c new file mode 100644 index 0000000..f70f979 --- /dev/null +++ b/Maple/Core/Src/stm32f1xx_it.c @@ -0,0 +1,233 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f1xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32f1xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ +extern PCD_HandleTypeDef hpcd_USB_FS; +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M3 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32F1xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32f1xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles USB high priority or CAN TX interrupts. + */ +void USB_HP_CAN1_TX_IRQHandler(void) +{ + /* USER CODE BEGIN USB_HP_CAN1_TX_IRQn 0 */ + + /* USER CODE END USB_HP_CAN1_TX_IRQn 0 */ + HAL_PCD_IRQHandler(&hpcd_USB_FS); + /* USER CODE BEGIN USB_HP_CAN1_TX_IRQn 1 */ + + /* USER CODE END USB_HP_CAN1_TX_IRQn 1 */ +} + +/** + * @brief This function handles USB low priority or CAN RX0 interrupts. + */ +void USB_LP_CAN1_RX0_IRQHandler(void) +{ + /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 0 */ + + /* USER CODE END USB_LP_CAN1_RX0_IRQn 0 */ + HAL_PCD_IRQHandler(&hpcd_USB_FS); + /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 1 */ + + /* USER CODE END USB_LP_CAN1_RX0_IRQn 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Core/Src/syscalls.c b/Maple/Core/Src/syscalls.c new file mode 100644 index 0000000..4ec9584 --- /dev/null +++ b/Maple/Core/Src/syscalls.c @@ -0,0 +1,159 @@ +/** + ****************************************************************************** + * @file syscalls.c + * @author Auto-generated by STM32CubeIDE + * @brief STM32CubeIDE Minimal System calls file + * + * For more information about which c-functions + * need which of these lowlevel functions + * please consult the Newlib libc-manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include + + +/* Variables */ +//#undef errno +extern int errno; +extern int __io_putchar(int ch) __attribute__((weak)); +extern int __io_getchar(void) __attribute__((weak)); + +register char * stack_ptr asm("sp"); + +char *__env[1] = { 0 }; +char **environ = __env; + + +/* Functions */ +void initialise_monitor_handles() +{ +} + +int _getpid(void) +{ + return 1; +} + +int _kill(int pid, int sig) +{ + errno = EINVAL; + return -1; +} + +void _exit (int status) +{ + _kill(status, -1); + while (1) {} /* Make sure we hang here */ +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + *ptr++ = __io_getchar(); + } + +return len; +} + +__attribute__((weak)) int _write(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + __io_putchar(*ptr++); + } + return len; +} + +int _close(int file) +{ + return -1; +} + + +int _fstat(int file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _isatty(int file) +{ + return 1; +} + +int _lseek(int file, int ptr, int dir) +{ + return 0; +} + +int _open(char *path, int flags, ...) +{ + /* Pretend like we always fail */ + return -1; +} + +int _wait(int *status) +{ + errno = ECHILD; + return -1; +} + +int _unlink(char *name) +{ + errno = ENOENT; + return -1; +} + +int _times(struct tms *buf) +{ + return -1; +} + +int _stat(char *file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _link(char *old, char *new) +{ + errno = EMLINK; + return -1; +} + +int _fork(void) +{ + errno = EAGAIN; + return -1; +} + +int _execve(char *name, char **argv, char **env) +{ + errno = ENOMEM; + return -1; +} diff --git a/Maple/Core/Src/sysmem.c b/Maple/Core/Src/sysmem.c new file mode 100644 index 0000000..d7cc52c --- /dev/null +++ b/Maple/Core/Src/sysmem.c @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file sysmem.c + * @author Generated by STM32CubeIDE + * @brief STM32CubeIDE System Memory calls file + * + * For more information about which C functions + * need which of these lowlevel functions + * please consult the newlib libc manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include + +/** + * Pointer to the current high watermark of the heap usage + */ +static uint8_t *__sbrk_heap_end = NULL; + +/** + * @brief _sbrk() allocates memory to the newlib heap and is used by malloc + * and others from the C library + * + * @verbatim + * ############################################################################ + * # .data # .bss # newlib heap # MSP stack # + * # # # # Reserved by _Min_Stack_Size # + * ############################################################################ + * ^-- RAM start ^-- _end _estack, RAM end --^ + * @endverbatim + * + * This implementation starts allocating at the '_end' linker symbol + * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack + * The implementation considers '_estack' linker symbol to be RAM end + * NOTE: If the MSP stack, at any point during execution, grows larger than the + * reserved size, please increase the '_Min_Stack_Size'. + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + const uint8_t *max_heap = (uint8_t *)stack_limit; + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + { + __sbrk_heap_end = &_end; + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + { + errno = ENOMEM; + return (void *)-1; + } + + prev_heap_end = __sbrk_heap_end; + __sbrk_heap_end += incr; + + return (void *)prev_heap_end; +} diff --git a/Maple/Core/Src/system_stm32f1xx.c b/Maple/Core/Src/system_stm32f1xx.c new file mode 100644 index 0000000..052bec6 --- /dev/null +++ b/Maple/Core/Src/system_stm32f1xx.c @@ -0,0 +1,408 @@ +/** + ****************************************************************************** + * @file system_stm32f1xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f1xx_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on + * the product used), refer to "HSE_VALUE". + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f1xx_system + * @{ + */ + +/** @addtogroup STM32F1xx_System_Private_Includes + * @{ + */ + +#include "stm32f1xx.h" + +/** + * @} + */ + +/** @addtogroup STM32F1xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F1xx_System_Private_Defines + * @{ + */ + +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI_VALUE */ + +/*!< Uncomment the following line if you need to use external SRAM */ +#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) +/* #define DATA_IN_ExtSRAM */ +#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in Flash or Sram, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +/*!< Uncomment the following line if you need to relocate your vector Table + in Sram else user remap will be done in Flash. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#endif /* VECT_TAB_SRAM */ +#endif /* USER_VECT_TAB_ADDRESS */ + +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F1xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F1xx_System_Private_Variables + * @{ + */ + + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 16000000; +const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4}; + +/** + * @} + */ + +/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ + +/** + * @} + */ + +/** @addtogroup STM32F1xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ +#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the Vector Table location -------------------------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#endif /* USER_VECT_TAB_ADDRESS */ +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depending on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U; + +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U; +#endif /* STM32F105xC */ + +#if defined(STM32F100xB) || defined(STM32F100xE) + uint32_t prediv1factor = 0U; +#endif /* STM32F100xB or STM32F100xE */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00U: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04U: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08U: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + +#if !defined(STM32F105xC) && !defined(STM32F107xC) + pllmull = ( pllmull >> 18U) + 2U; + + if (pllsource == 0x00U) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1U) * pllmull; + } + else + { + #if defined(STM32F100xB) || defined(STM32F100xE) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1U) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18U; + + if (pllmull != 0x0DU) + { + pllmull += 2U; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13U / 2U; + } + + if (pllsource == 0x00U) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1U) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U; + + if (prediv1source == 0U) + { + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U; + pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; + SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F105xC */ + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) +/** + * @brief Setup the external memory controller. Called in startup_stm32f1xx.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f1xx_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmpreg; + /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114U; + + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN); + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0U; + + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN); + + (void)(tmpreg); + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BBU; + GPIOD->CRH = 0xBBBBBBBBU; + + GPIOE->CRL = 0xB44444BBU; + GPIOE->CRH = 0xBBBBBBBBU; + + GPIOF->CRL = 0x44BBBBBBU; + GPIOF->CRH = 0xBBBB4444U; + + GPIOG->CRL = 0x44BBBBBBU; + GPIOG->CRH = 0x444B4B44U; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4U] = 0x00001091U; + FSMC_Bank1->BTCR[5U] = 0x00110212U; +} +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Core/Startup/startup_stm32f103cbux.s b/Maple/Core/Startup/startup_stm32f103cbux.s new file mode 100644 index 0000000..48cf447 --- /dev/null +++ b/Maple/Core/Startup/startup_stm32f103cbux.s @@ -0,0 +1,362 @@ +/** + *************** (C) COPYRIGHT 2017 STMicroelectronics ************************ + * @file startup_stm32f103xb.s + * @author MCD Application Team + * @brief STM32F103xB Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M3 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m3 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMPER_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_2_IRQHandler + .word USB_HP_CAN1_TX_IRQHandler + .word USB_LP_CAN1_RX0_IRQHandler + .word CAN1_RX1_IRQHandler + .word CAN1_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_IRQHandler + .word TIM1_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word USBWakeUp_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F10x Medium Density devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMPER_IRQHandler + .thumb_set TAMPER_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_2_IRQHandler + .thumb_set ADC1_2_IRQHandler,Default_Handler + + .weak USB_HP_CAN1_TX_IRQHandler + .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler + + .weak USB_LP_CAN1_RX0_IRQHandler + .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak USBWakeUp_IRQHandler + .thumb_set USBWakeUp_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Maple/Debug/Core/Src/main.d b/Maple/Debug/Core/Src/main.d new file mode 100644 index 0000000..6cc2b50 --- /dev/null +++ b/Maple/Debug/Core/Src/main.d @@ -0,0 +1,107 @@ +Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../USB_DEVICE/App/usb_device.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../USB_DEVICE/Target/usbd_conf.h ../USB_DEVICE/App/usbd_cdc_if.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../USB_DEVICE/App/usb_device.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../USB_DEVICE/App/usbd_cdc_if.h: + +../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: diff --git a/Maple/Debug/Core/Src/main.o b/Maple/Debug/Core/Src/main.o new file mode 100644 index 0000000..e723b31 Binary files /dev/null and b/Maple/Debug/Core/Src/main.o differ diff --git a/Maple/Debug/Core/Src/main.su b/Maple/Debug/Core/Src/main.su new file mode 100644 index 0000000..7018a12 --- /dev/null +++ b/Maple/Debug/Core/Src/main.su @@ -0,0 +1,4 @@ +main.c:65:5:main 16 static +main.c:116:6:SystemClock_Config 88 static +main.c:162:13:MX_GPIO_Init 40 static +main.c:191:6:Error_Handler 4 static,ignoring_inline_asm diff --git a/Maple/Debug/Core/Src/stm32f1xx_hal_msp.d b/Maple/Debug/Core/Src/stm32f1xx_hal_msp.d new file mode 100644 index 0000000..82367b4 --- /dev/null +++ b/Maple/Debug/Core/Src/stm32f1xx_hal_msp.d @@ -0,0 +1,78 @@ +Core/Src/stm32f1xx_hal_msp.o: ../Core/Src/stm32f1xx_hal_msp.c \ + ../Core/Inc/main.h ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Core/Src/stm32f1xx_hal_msp.o b/Maple/Debug/Core/Src/stm32f1xx_hal_msp.o new file mode 100644 index 0000000..6ca24cd Binary files /dev/null and b/Maple/Debug/Core/Src/stm32f1xx_hal_msp.o differ diff --git a/Maple/Debug/Core/Src/stm32f1xx_hal_msp.su b/Maple/Debug/Core/Src/stm32f1xx_hal_msp.su new file mode 100644 index 0000000..6f735d5 --- /dev/null +++ b/Maple/Debug/Core/Src/stm32f1xx_hal_msp.su @@ -0,0 +1 @@ +stm32f1xx_hal_msp.c:64:6:HAL_MspInit 24 static diff --git a/Maple/Debug/Core/Src/stm32f1xx_it.d b/Maple/Debug/Core/Src/stm32f1xx_it.d new file mode 100644 index 0000000..13de8e1 --- /dev/null +++ b/Maple/Debug/Core/Src/stm32f1xx_it.d @@ -0,0 +1,81 @@ +Core/Src/stm32f1xx_it.o: ../Core/Src/stm32f1xx_it.c ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Core/Inc/stm32f1xx_it.h + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Core/Inc/stm32f1xx_it.h: diff --git a/Maple/Debug/Core/Src/stm32f1xx_it.o b/Maple/Debug/Core/Src/stm32f1xx_it.o new file mode 100644 index 0000000..2bac81b Binary files /dev/null and b/Maple/Debug/Core/Src/stm32f1xx_it.o differ diff --git a/Maple/Debug/Core/Src/stm32f1xx_it.su b/Maple/Debug/Core/Src/stm32f1xx_it.su new file mode 100644 index 0000000..18c9efb --- /dev/null +++ b/Maple/Debug/Core/Src/stm32f1xx_it.su @@ -0,0 +1,11 @@ +stm32f1xx_it.c:70:6:NMI_Handler 4 static +stm32f1xx_it.c:85:6:HardFault_Handler 4 static +stm32f1xx_it.c:100:6:MemManage_Handler 4 static +stm32f1xx_it.c:115:6:BusFault_Handler 4 static +stm32f1xx_it.c:130:6:UsageFault_Handler 4 static +stm32f1xx_it.c:145:6:SVC_Handler 4 static +stm32f1xx_it.c:158:6:DebugMon_Handler 4 static +stm32f1xx_it.c:171:6:PendSV_Handler 4 static +stm32f1xx_it.c:184:6:SysTick_Handler 8 static +stm32f1xx_it.c:205:6:USB_HP_CAN1_TX_IRQHandler 8 static +stm32f1xx_it.c:219:6:USB_LP_CAN1_RX0_IRQHandler 8 static diff --git a/Maple/Debug/Core/Src/subdir.mk b/Maple/Debug/Core/Src/subdir.mk new file mode 100644 index 0000000..9be7645 --- /dev/null +++ b/Maple/Debug/Core/Src/subdir.mk @@ -0,0 +1,44 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Core/Src/main.c \ +../Core/Src/stm32f1xx_hal_msp.c \ +../Core/Src/stm32f1xx_it.c \ +../Core/Src/syscalls.c \ +../Core/Src/sysmem.c \ +../Core/Src/system_stm32f1xx.c + +OBJS += \ +./Core/Src/main.o \ +./Core/Src/stm32f1xx_hal_msp.o \ +./Core/Src/stm32f1xx_it.o \ +./Core/Src/syscalls.o \ +./Core/Src/sysmem.o \ +./Core/Src/system_stm32f1xx.o + +C_DEPS += \ +./Core/Src/main.d \ +./Core/Src/stm32f1xx_hal_msp.d \ +./Core/Src/stm32f1xx_it.d \ +./Core/Src/syscalls.d \ +./Core/Src/sysmem.d \ +./Core/Src/system_stm32f1xx.d + + +# Each subdirectory must supply rules for building sources it contributes +Core/Src/main.o: ../Core/Src/main.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/stm32f1xx_hal_msp.o: ../Core/Src/stm32f1xx_hal_msp.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f1xx_hal_msp.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/stm32f1xx_it.o: ../Core/Src/stm32f1xx_it.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f1xx_it.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/syscalls.o: ../Core/Src/syscalls.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/syscalls.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/sysmem.o: ../Core/Src/sysmem.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/sysmem.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/system_stm32f1xx.o: ../Core/Src/system_stm32f1xx.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/system_stm32f1xx.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Maple/Debug/Core/Src/syscalls.d b/Maple/Debug/Core/Src/syscalls.d new file mode 100644 index 0000000..8667c70 --- /dev/null +++ b/Maple/Debug/Core/Src/syscalls.d @@ -0,0 +1 @@ +Core/Src/syscalls.o: ../Core/Src/syscalls.c diff --git a/Maple/Debug/Core/Src/syscalls.o b/Maple/Debug/Core/Src/syscalls.o new file mode 100644 index 0000000..c8905b3 Binary files /dev/null and b/Maple/Debug/Core/Src/syscalls.o differ diff --git a/Maple/Debug/Core/Src/syscalls.su b/Maple/Debug/Core/Src/syscalls.su new file mode 100644 index 0000000..492a785 --- /dev/null +++ b/Maple/Debug/Core/Src/syscalls.su @@ -0,0 +1,18 @@ +syscalls.c:48:6:initialise_monitor_handles 4 static +syscalls.c:52:5:_getpid 4 static +syscalls.c:57:5:_kill 16 static +syscalls.c:63:6:_exit 16 static +syscalls.c:69:27:_read 32 static +syscalls.c:81:27:_write 32 static +syscalls.c:92:5:_close 16 static +syscalls.c:98:5:_fstat 16 static +syscalls.c:104:5:_isatty 16 static +syscalls.c:109:5:_lseek 24 static +syscalls.c:114:5:_open 12 static +syscalls.c:120:5:_wait 16 static +syscalls.c:126:5:_unlink 16 static +syscalls.c:132:5:_times 16 static +syscalls.c:137:5:_stat 16 static +syscalls.c:143:5:_link 16 static +syscalls.c:149:5:_fork 8 static +syscalls.c:155:5:_execve 24 static diff --git a/Maple/Debug/Core/Src/sysmem.d b/Maple/Debug/Core/Src/sysmem.d new file mode 100644 index 0000000..74fecf9 --- /dev/null +++ b/Maple/Debug/Core/Src/sysmem.d @@ -0,0 +1 @@ +Core/Src/sysmem.o: ../Core/Src/sysmem.c diff --git a/Maple/Debug/Core/Src/sysmem.o b/Maple/Debug/Core/Src/sysmem.o new file mode 100644 index 0000000..da617b3 Binary files /dev/null and b/Maple/Debug/Core/Src/sysmem.o differ diff --git a/Maple/Debug/Core/Src/sysmem.su b/Maple/Debug/Core/Src/sysmem.su new file mode 100644 index 0000000..4474c68 --- /dev/null +++ b/Maple/Debug/Core/Src/sysmem.su @@ -0,0 +1 @@ +sysmem.c:54:7:_sbrk 32 static diff --git a/Maple/Debug/Core/Src/system_stm32f1xx.d b/Maple/Debug/Core/Src/system_stm32f1xx.d new file mode 100644 index 0000000..cf7d55f --- /dev/null +++ b/Maple/Debug/Core/Src/system_stm32f1xx.d @@ -0,0 +1,76 @@ +Core/Src/system_stm32f1xx.o: ../Core/Src/system_stm32f1xx.c \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Core/Src/system_stm32f1xx.o b/Maple/Debug/Core/Src/system_stm32f1xx.o new file mode 100644 index 0000000..ea8432e Binary files /dev/null and b/Maple/Debug/Core/Src/system_stm32f1xx.o differ diff --git a/Maple/Debug/Core/Src/system_stm32f1xx.su b/Maple/Debug/Core/Src/system_stm32f1xx.su new file mode 100644 index 0000000..967fb21 --- /dev/null +++ b/Maple/Debug/Core/Src/system_stm32f1xx.su @@ -0,0 +1,2 @@ +system_stm32f1xx.c:176:6:SystemInit 4 static +system_stm32f1xx.c:225:6:SystemCoreClockUpdate 24 static diff --git a/Maple/Debug/Core/Startup/startup_stm32f103cbux.d b/Maple/Debug/Core/Startup/startup_stm32f103cbux.d new file mode 100644 index 0000000..6efb2a5 --- /dev/null +++ b/Maple/Debug/Core/Startup/startup_stm32f103cbux.d @@ -0,0 +1,2 @@ +Core/Startup/startup_stm32f103cbux.o: \ + ../Core/Startup/startup_stm32f103cbux.s diff --git a/Maple/Debug/Core/Startup/startup_stm32f103cbux.o b/Maple/Debug/Core/Startup/startup_stm32f103cbux.o new file mode 100644 index 0000000..57b3e80 Binary files /dev/null and b/Maple/Debug/Core/Startup/startup_stm32f103cbux.o differ diff --git a/Maple/Debug/Core/Startup/subdir.mk b/Maple/Debug/Core/Startup/subdir.mk new file mode 100644 index 0000000..243f392 --- /dev/null +++ b/Maple/Debug/Core/Startup/subdir.mk @@ -0,0 +1,19 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +S_SRCS += \ +../Core/Startup/startup_stm32f103cbux.s + +OBJS += \ +./Core/Startup/startup_stm32f103cbux.o + +S_DEPS += \ +./Core/Startup/startup_stm32f103cbux.d + + +# Each subdirectory must supply rules for building sources it contributes +Core/Startup/startup_stm32f103cbux.o: ../Core/Startup/startup_stm32f103cbux.s + arm-none-eabi-gcc -mcpu=cortex-m3 -g3 -c -x assembler-with-cpp -MMD -MP -MF"Core/Startup/startup_stm32f103cbux.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<" + diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.d new file mode 100644 index 0000000..aa546c4 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o new file mode 100644 index 0000000..88b069b Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.su new file mode 100644 index 0000000..b50d33d --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.su @@ -0,0 +1,25 @@ +stm32f1xx_hal.c:142:19:HAL_Init 8 static +stm32f1xx_hal.c:175:19:HAL_DeInit 8 static +stm32f1xx_hal.c:200:13:HAL_MspInit 4 static +stm32f1xx_hal.c:211:13:HAL_MspDeInit 4 static +stm32f1xx_hal.c:234:26:HAL_InitTick 16 static +stm32f1xx_hal.c:293:13:HAL_IncTick 4 static +stm32f1xx_hal.c:304:17:HAL_GetTick 4 static +stm32f1xx_hal.c:313:10:HAL_GetTickPrio 4 static +stm32f1xx_hal.c:322:19:HAL_SetTickFreq 24 static +stm32f1xx_hal.c:354:21:HAL_GetTickFreq 4 static +stm32f1xx_hal.c:370:13:HAL_Delay 24 static +stm32f1xx_hal.c:396:13:HAL_SuspendTick 4 static +stm32f1xx_hal.c:412:13:HAL_ResumeTick 4 static +stm32f1xx_hal.c:422:10:HAL_GetHalVersion 4 static +stm32f1xx_hal.c:438:10:HAL_GetREVID 4 static +stm32f1xx_hal.c:454:10:HAL_GetDEVID 4 static +stm32f1xx_hal.c:463:10:HAL_GetUIDw0 4 static +stm32f1xx_hal.c:472:10:HAL_GetUIDw1 4 static +stm32f1xx_hal.c:481:10:HAL_GetUIDw2 4 static +stm32f1xx_hal.c:490:6:HAL_DBGMCU_EnableDBGSleepMode 4 static +stm32f1xx_hal.c:506:6:HAL_DBGMCU_DisableDBGSleepMode 4 static +stm32f1xx_hal.c:536:6:HAL_DBGMCU_EnableDBGStopMode 4 static +stm32f1xx_hal.c:552:6:HAL_DBGMCU_DisableDBGStopMode 4 static +stm32f1xx_hal.c:568:6:HAL_DBGMCU_EnableDBGStandbyMode 4 static +stm32f1xx_hal.c:584:6:HAL_DBGMCU_DisableDBGStandbyMode 4 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.d new file mode 100644 index 0000000..609077b --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o new file mode 100644 index 0000000..2882845 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.su new file mode 100644 index 0000000..634528a --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.su @@ -0,0 +1,29 @@ +core_cm3.h:1480:22:__NVIC_SetPriorityGrouping 24 static +core_cm3.h:1499:26:__NVIC_GetPriorityGrouping 4 static +core_cm3.h:1511:22:__NVIC_EnableIRQ 16 static +core_cm3.h:1547:22:__NVIC_DisableIRQ 16 static,ignoring_inline_asm +core_cm3.h:1566:26:__NVIC_GetPendingIRQ 16 static +core_cm3.h:1585:22:__NVIC_SetPendingIRQ 16 static +core_cm3.h:1600:22:__NVIC_ClearPendingIRQ 16 static +core_cm3.h:1617:26:__NVIC_GetActive 16 static +core_cm3.h:1639:22:__NVIC_SetPriority 16 static +core_cm3.h:1661:26:__NVIC_GetPriority 16 static +core_cm3.h:1686:26:NVIC_EncodePriority 40 static +core_cm3.h:1713:22:NVIC_DecodePriority 40 static +core_cm3.h:1762:34:__NVIC_SystemReset 4 static,ignoring_inline_asm +core_cm3.h:1834:26:SysTick_Config 16 static +stm32f1xx_hal_cortex.c:143:6:HAL_NVIC_SetPriorityGrouping 16 static +stm32f1xx_hal_cortex.c:165:6:HAL_NVIC_SetPriority 32 static +stm32f1xx_hal_cortex.c:187:6:HAL_NVIC_EnableIRQ 16 static +stm32f1xx_hal_cortex.c:203:6:HAL_NVIC_DisableIRQ 16 static +stm32f1xx_hal_cortex.c:216:6:HAL_NVIC_SystemReset 8 static +stm32f1xx_hal_cortex.c:229:10:HAL_SYSTICK_Config 16 static +stm32f1xx_hal_cortex.c:344:10:HAL_NVIC_GetPriorityGrouping 8 static +stm32f1xx_hal_cortex.c:371:6:HAL_NVIC_GetPriority 24 static +stm32f1xx_hal_cortex.c:386:6:HAL_NVIC_SetPendingIRQ 16 static +stm32f1xx_hal_cortex.c:404:10:HAL_NVIC_GetPendingIRQ 16 static +stm32f1xx_hal_cortex.c:420:6:HAL_NVIC_ClearPendingIRQ 16 static +stm32f1xx_hal_cortex.c:437:10:HAL_NVIC_GetActive 16 static +stm32f1xx_hal_cortex.c:454:6:HAL_SYSTICK_CLKSourceConfig 16 static +stm32f1xx_hal_cortex.c:472:6:HAL_SYSTICK_IRQHandler 8 static +stm32f1xx_hal_cortex.c:481:13:HAL_SYSTICK_Callback 4 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.d new file mode 100644 index 0000000..1fd779c --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o new file mode 100644 index 0000000..33b69c9 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.su new file mode 100644 index 0000000..5c24809 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.su @@ -0,0 +1,13 @@ +stm32f1xx_hal_dma.c:143:19:HAL_DMA_Init 24 static +stm32f1xx_hal_dma.c:220:19:HAL_DMA_DeInit 16 static +stm32f1xx_hal_dma.c:319:19:HAL_DMA_Start 32 static +stm32f1xx_hal_dma.c:362:19:HAL_DMA_Start_IT 32 static +stm32f1xx_hal_dma.c:416:19:HAL_DMA_Abort 24 static +stm32f1xx_hal_dma.c:457:19:HAL_DMA_Abort_IT 24 static +stm32f1xx_hal_dma.c:502:19:HAL_DMA_PollForTransfer 32 static +stm32f1xx_hal_dma.c:603:6:HAL_DMA_IRQHandler 24 static +stm32f1xx_hal_dma.c:693:19:HAL_DMA_RegisterCallback 32 static +stm32f1xx_hal_dma.c:744:19:HAL_DMA_UnRegisterCallback 24 static +stm32f1xx_hal_dma.c:820:22:HAL_DMA_GetState 16 static +stm32f1xx_hal_dma.c:832:10:HAL_DMA_GetError 16 static +stm32f1xx_hal_dma.c:858:13:DMA_SetConfig 24 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.d new file mode 100644 index 0000000..596ae0e --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o new file mode 100644 index 0000000..8f0134a Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.su new file mode 100644 index 0000000..f6ab9c8 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.su @@ -0,0 +1,9 @@ +stm32f1xx_hal_exti.c:143:19:HAL_EXTI_SetConfigLine 32 static +stm32f1xx_hal_exti.c:238:19:HAL_EXTI_GetConfigLine 32 static +stm32f1xx_hal_exti.c:327:19:HAL_EXTI_ClearConfigLine 32 static +stm32f1xx_hal_exti.c:380:19:HAL_EXTI_RegisterCallback 32 static +stm32f1xx_hal_exti.c:405:19:HAL_EXTI_GetHandle 16 static +stm32f1xx_hal_exti.c:445:6:HAL_EXTI_IRQHandler 24 static +stm32f1xx_hal_exti.c:477:10:HAL_EXTI_GetPending 32 static +stm32f1xx_hal_exti.c:506:6:HAL_EXTI_ClearPending 24 static +stm32f1xx_hal_exti.c:527:6:HAL_EXTI_GenerateSWI 24 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.d new file mode 100644 index 0000000..efc290b --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o new file mode 100644 index 0000000..c8f04a3 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.su new file mode 100644 index 0000000..09fa98e --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.su @@ -0,0 +1,14 @@ +stm32f1xx_hal_flash.c:168:19:HAL_FLASH_Program 48 static +stm32f1xx_hal_flash.c:267:19:HAL_FLASH_Program_IT 40 static +stm32f1xx_hal_flash.c:332:6:HAL_FLASH_IRQHandler 24 static +stm32f1xx_hal_flash.c:606:13:HAL_FLASH_EndOfOperationCallback 16 static +stm32f1xx_hal_flash.c:624:13:HAL_FLASH_OperationErrorCallback 16 static +stm32f1xx_hal_flash.c:657:19:HAL_FLASH_Unlock 16 static +stm32f1xx_hal_flash.c:695:19:HAL_FLASH_Lock 4 static +stm32f1xx_hal_flash.c:712:19:HAL_FLASH_OB_Unlock 4 static +stm32f1xx_hal_flash.c:732:19:HAL_FLASH_OB_Lock 4 static +stm32f1xx_hal_flash.c:745:6:HAL_FLASH_OB_Launch 8 static +stm32f1xx_hal_flash.c:774:10:HAL_FLASH_GetError 4 static +stm32f1xx_hal_flash.c:797:13:FLASH_Program_HalfWord 16 static +stm32f1xx_hal_flash.c:826:19:FLASH_WaitForLastOperation 24 static +stm32f1xx_hal_flash.c:914:13:FLASH_SetErrorCode 16 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.d new file mode 100644 index 0000000..46fa646 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o new file mode 100644 index 0000000..9e3bf60 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.su new file mode 100644 index 0000000..354b9bf --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.su @@ -0,0 +1,16 @@ +stm32f1xx_hal_flash_ex.c:159:19:HAL_FLASHEx_Erase 24 static +stm32f1xx_hal_flash_ex.c:319:19:HAL_FLASHEx_Erase_IT 24 static +stm32f1xx_hal_flash_ex.c:397:19:HAL_FLASHEx_OBErase 16 static +stm32f1xx_hal_flash_ex.c:446:19:HAL_FLASHEx_OBProgram 24 static +stm32f1xx_hal_flash_ex.c:527:6:HAL_FLASHEx_OBGetConfig 16 static +stm32f1xx_hal_flash_ex.c:549:10:HAL_FLASHEx_OBGetUserData 24 static +stm32f1xx_hal_flash_ex.c:595:13:FLASH_MassErase 16 static +stm32f1xx_hal_flash_ex.c:644:26:FLASH_OB_EnableWRP 32 static +stm32f1xx_hal_flash_ex.c:767:26:FLASH_OB_DisableWRP 32 static +stm32f1xx_hal_flash_ex.c:886:26:FLASH_OB_RDP_LevelConfig 24 static +stm32f1xx_hal_flash_ex.c:937:26:FLASH_OB_UserConfig 24 static +stm32f1xx_hal_flash_ex.c:988:26:FLASH_OB_ProgramData 24 static +stm32f1xx_hal_flash_ex.c:1021:17:FLASH_OB_GetWRP 4 static +stm32f1xx_hal_flash_ex.c:1034:17:FLASH_OB_GetRDP 16 static +stm32f1xx_hal_flash_ex.c:1060:16:FLASH_OB_GetUser 4 static +stm32f1xx_hal_flash_ex.c:1089:6:FLASH_PageErase 16 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.d new file mode 100644 index 0000000..fda961d --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o new file mode 100644 index 0000000..6e13d0a Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.su new file mode 100644 index 0000000..27b52b4 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.su @@ -0,0 +1,8 @@ +stm32f1xx_hal_gpio.c:178:6:HAL_GPIO_Init 48 static +stm32f1xx_hal_gpio.c:351:6:HAL_GPIO_DeInit 40 static +stm32f1xx_hal_gpio.c:431:15:HAL_GPIO_ReadPin 24 static +stm32f1xx_hal_gpio.c:465:6:HAL_GPIO_WritePin 16 static +stm32f1xx_hal_gpio.c:487:6:HAL_GPIO_TogglePin 24 static +stm32f1xx_hal_gpio.c:511:19:HAL_GPIO_LockPin 24 static +stm32f1xx_hal_gpio.c:546:6:HAL_GPIO_EXTI_IRQHandler 16 static +stm32f1xx_hal_gpio.c:561:13:HAL_GPIO_EXTI_Callback 16 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.d new file mode 100644 index 0000000..8fc0024 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o new file mode 100644 index 0000000..095a7f9 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.su new file mode 100644 index 0000000..87a538a --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.su @@ -0,0 +1,3 @@ +stm32f1xx_hal_gpio_ex.c:81:6:HAL_GPIOEx_ConfigEventout 16 static +stm32f1xx_hal_gpio_ex.c:95:6:HAL_GPIOEx_EnableEventout 4 static +stm32f1xx_hal_gpio_ex.c:104:6:HAL_GPIOEx_DisableEventout 4 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.d new file mode 100644 index 0000000..1b081c6 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o new file mode 100644 index 0000000..50695cf Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.su new file mode 100644 index 0000000..fa7f2f7 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.su @@ -0,0 +1,36 @@ +stm32f1xx_hal_pcd.c:128:19:HAL_PCD_Init 64 static +stm32f1xx_hal_pcd.c:246:19:HAL_PCD_DeInit 16 static +stm32f1xx_hal_pcd.c:285:13:HAL_PCD_MspInit 16 static +stm32f1xx_hal_pcd.c:300:13:HAL_PCD_MspDeInit 16 static +stm32f1xx_hal_pcd.c:856:19:HAL_PCD_Start 16 static +stm32f1xx_hal_pcd.c:876:19:HAL_PCD_Stop 16 static +stm32f1xx_hal_pcd.c:1247:6:HAL_PCD_IRQHandler 40 static +stm32f1xx_hal_pcd.c:1365:6:HAL_PCD_WKUP_IRQHandler 16 static +stm32f1xx_hal_pcd.c:1378:13:HAL_PCD_DataOutStageCallback 16 static +stm32f1xx_hal_pcd.c:1395:13:HAL_PCD_DataInStageCallback 16 static +stm32f1xx_hal_pcd.c:1410:13:HAL_PCD_SetupStageCallback 16 static +stm32f1xx_hal_pcd.c:1425:13:HAL_PCD_SOFCallback 16 static +stm32f1xx_hal_pcd.c:1440:13:HAL_PCD_ResetCallback 16 static +stm32f1xx_hal_pcd.c:1455:13:HAL_PCD_SuspendCallback 16 static +stm32f1xx_hal_pcd.c:1470:13:HAL_PCD_ResumeCallback 16 static +stm32f1xx_hal_pcd.c:1486:13:HAL_PCD_ISOOUTIncompleteCallback 16 static +stm32f1xx_hal_pcd.c:1503:13:HAL_PCD_ISOINIncompleteCallback 16 static +stm32f1xx_hal_pcd.c:1519:13:HAL_PCD_ConnectCallback 16 static +stm32f1xx_hal_pcd.c:1534:13:HAL_PCD_DisconnectCallback 16 static +stm32f1xx_hal_pcd.c:1568:19:HAL_PCD_DevConnect 16 static +stm32f1xx_hal_pcd.c:1587:19:HAL_PCD_DevDisconnect 16 static +stm32f1xx_hal_pcd.c:1607:19:HAL_PCD_SetAddress 16 static +stm32f1xx_hal_pcd.c:1624:19:HAL_PCD_EP_Open 24 static +stm32f1xx_hal_pcd.c:1669:19:HAL_PCD_EP_Close 24 static +stm32f1xx_hal_pcd.c:1700:19:HAL_PCD_EP_Receive 32 static +stm32f1xx_hal_pcd.c:1731:10:HAL_PCD_EP_GetRxCount 16 static +stm32f1xx_hal_pcd.c:1743:19:HAL_PCD_EP_Transmit 32 static +stm32f1xx_hal_pcd.c:1778:19:HAL_PCD_EP_SetStall 24 static +stm32f1xx_hal_pcd.c:1821:19:HAL_PCD_EP_ClrStall 24 static +stm32f1xx_hal_pcd.c:1857:19:HAL_PCD_EP_Flush 16 static +stm32f1xx_hal_pcd.c:1880:19:HAL_PCD_ActivateRemoteWakeup 16 static +stm32f1xx_hal_pcd.c:1890:19:HAL_PCD_DeActivateRemoteWakeup 16 static +stm32f1xx_hal_pcd.c:1919:18:HAL_PCD_GetState 16 static +stm32f1xx_hal_pcd.c:2079:26:PCD_EP_ISR_Handler 64 static +stm32f1xx_hal_pcd.c:2314:17:HAL_PCD_EP_DB_Receive 40 static +stm32f1xx_hal_pcd.c:2395:26:HAL_PCD_EP_DB_Transmit 80 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.d new file mode 100644 index 0000000..30a1816 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o new file mode 100644 index 0000000..cca8a10 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.su new file mode 100644 index 0000000..2abcefa --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.su @@ -0,0 +1,4 @@ +stm32f1xx_hal_pcd_ex.c:138:20:HAL_PCDEx_PMAConfig 32 static +stm32f1xx_hal_pcd_ex.c:181:13:HAL_PCDEx_SetConnectionState 16 static +stm32f1xx_hal_pcd_ex.c:198:13:HAL_PCDEx_LPM_Callback 16 static +stm32f1xx_hal_pcd_ex.c:215:13:HAL_PCDEx_BCD_Callback 16 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.d new file mode 100644 index 0000000..5203ce8 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o new file mode 100644 index 0000000..a47da00 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.su new file mode 100644 index 0000000..3a73422 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.su @@ -0,0 +1,18 @@ +stm32f1xx_hal_pwr.c:117:13:PWR_OverloadWfe 4 static,ignoring_inline_asm +stm32f1xx_hal_pwr.c:156:6:HAL_PWR_DeInit 4 static +stm32f1xx_hal_pwr.c:169:6:HAL_PWR_EnableBkUpAccess 4 static +stm32f1xx_hal_pwr.c:182:6:HAL_PWR_DisableBkUpAccess 4 static +stm32f1xx_hal_pwr.c:316:6:HAL_PWR_ConfigPVD 16 static +stm32f1xx_hal_pwr.c:359:6:HAL_PWR_EnablePVD 4 static +stm32f1xx_hal_pwr.c:369:6:HAL_PWR_DisablePVD 4 static +stm32f1xx_hal_pwr.c:382:6:HAL_PWR_EnableWakeUpPin 24 static,ignoring_inline_asm +stm32f1xx_hal_pwr.c:397:6:HAL_PWR_DisableWakeUpPin 24 static,ignoring_inline_asm +stm32f1xx_hal_pwr.c:417:6:HAL_PWR_EnterSLEEPMode 16 static,ignoring_inline_asm +stm32f1xx_hal_pwr.c:463:6:HAL_PWR_EnterSTOPMode 16 static,ignoring_inline_asm +stm32f1xx_hal_pwr.c:503:6:HAL_PWR_EnterSTANDBYMode 4 static,ignoring_inline_asm +stm32f1xx_hal_pwr.c:528:6:HAL_PWR_EnableSleepOnExit 4 static +stm32f1xx_hal_pwr.c:541:6:HAL_PWR_DisableSleepOnExit 4 static +stm32f1xx_hal_pwr.c:554:6:HAL_PWR_EnableSEVOnPend 4 static +stm32f1xx_hal_pwr.c:567:6:HAL_PWR_DisableSEVOnPend 4 static +stm32f1xx_hal_pwr.c:580:6:HAL_PWR_PVD_IRQHandler 8 static +stm32f1xx_hal_pwr.c:597:13:HAL_PWR_PVDCallback 4 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.d new file mode 100644 index 0000000..34acc95 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o new file mode 100644 index 0000000..289c7f8 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.su new file mode 100644 index 0000000..aa05c10 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.su @@ -0,0 +1,15 @@ +stm32f1xx_hal_rcc.c:202:19:HAL_RCC_DeInit 16 static +stm32f1xx_hal_rcc.c:347:19:HAL_RCC_OscConfig 32 static +stm32f1xx_hal_rcc.c:813:19:HAL_RCC_ClockConfig 24 static +stm32f1xx_hal_rcc.c:1002:6:HAL_RCC_MCOConfig 48 static +stm32f1xx_hal_rcc.c:1039:6:HAL_RCC_EnableCSS 4 static +stm32f1xx_hal_rcc.c:1048:6:HAL_RCC_DisableCSS 4 static +stm32f1xx_hal_rcc.c:1082:10:HAL_RCC_GetSysClockFreq 48 static +stm32f1xx_hal_rcc.c:1176:10:HAL_RCC_GetHCLKFreq 4 static +stm32f1xx_hal_rcc.c:1187:10:HAL_RCC_GetPCLK1Freq 8 static +stm32f1xx_hal_rcc.c:1199:10:HAL_RCC_GetPCLK2Freq 8 static +stm32f1xx_hal_rcc.c:1212:6:HAL_RCC_GetOscConfig 16 static +stm32f1xx_hal_rcc.c:1312:6:HAL_RCC_GetClockConfig 16 static +stm32f1xx_hal_rcc.c:1347:6:HAL_RCC_NMI_IRQHandler 8 static +stm32f1xx_hal_rcc.c:1365:13:RCC_Delay 24 static,ignoring_inline_asm +stm32f1xx_hal_rcc.c:1379:13:HAL_RCC_CSSCallback 4 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.d new file mode 100644 index 0000000..165d950 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o new file mode 100644 index 0000000..75df72d Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.su new file mode 100644 index 0000000..dbe5d7b --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.su @@ -0,0 +1,3 @@ +stm32f1xx_hal_rcc_ex.c:100:19:HAL_RCCEx_PeriphCLKConfig 32 static +stm32f1xx_hal_rcc_ex.c:294:6:HAL_RCCEx_GetPeriphCLKConfig 24 static +stm32f1xx_hal_rcc_ex.c:387:10:HAL_RCCEx_GetPeriphCLKFreq 64 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.d new file mode 100644 index 0000000..00f88c0 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o new file mode 100644 index 0000000..1a4ba77 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.su new file mode 100644 index 0000000..e69de29 diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.d new file mode 100644 index 0000000..4d342f0 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o new file mode 100644 index 0000000..0a758c1 Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.su new file mode 100644 index 0000000..e69de29 diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.d b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.d new file mode 100644 index 0000000..f23a98a --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.d @@ -0,0 +1,77 @@ +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o: \ + ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o new file mode 100644 index 0000000..36bdfbd Binary files /dev/null and b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o differ diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.su b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.su new file mode 100644 index 0000000..957d6f7 --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.su @@ -0,0 +1,27 @@ +stm32f1xx_ll_usb.c:1786:19:USB_CoreInit 16 static +stm32f1xx_ll_usb.c:1806:19:USB_EnableGlobalInt 24 static +stm32f1xx_ll_usb.c:1831:19:USB_DisableGlobalInt 24 static +stm32f1xx_ll_usb.c:1855:19:USB_SetCurrentMode 16 static +stm32f1xx_ll_usb.c:1876:19:USB_DevInit 16 static +stm32f1xx_ll_usb.c:1905:19:USB_FlushTxFifo 16 static +stm32f1xx_ll_usb.c:1924:19:USB_FlushRxFifo 16 static +stm32f1xx_ll_usb.c:1943:19:USB_ActivateEndpoint 112 static +stm32f1xx_ll_usb.c:2058:19:USB_DeactivateEndpoint 56 static +stm32f1xx_ll_usb.c:2114:19:USB_EPStartXfer 280 static +stm32f1xx_ll_usb.c:2324:19:USB_EPSetStall 24 static +stm32f1xx_ll_usb.c:2344:19:USB_EPClearStall 32 static +stm32f1xx_ll_usb.c:2375:19:USB_StopDevice 16 static +stm32f1xx_ll_usb.c:2396:20:USB_SetDevAddress 16 static +stm32f1xx_ll_usb.c:2412:20:USB_DevConnect 16 static +stm32f1xx_ll_usb.c:2430:20:USB_DevDisconnect 16 static +stm32f1xx_ll_usb.c:2448:11:USB_ReadInterrupts 24 static +stm32f1xx_ll_usb.c:2461:10:USB_ReadDevAllOutEpInterrupt 16 static +stm32f1xx_ll_usb.c:2477:10:USB_ReadDevAllInEpInterrupt 16 static +stm32f1xx_ll_usb.c:2495:10:USB_ReadDevOutEPInterrupt 16 static +stm32f1xx_ll_usb.c:2514:10:USB_ReadDevInEPInterrupt 16 static +stm32f1xx_ll_usb.c:2532:7:USB_ClearInterrupts 16 static +stm32f1xx_ll_usb.c:2549:19:USB_EP0_OutStart 16 static +stm32f1xx_ll_usb.c:2566:19:USB_ActivateRemoteWakeup 16 static +stm32f1xx_ll_usb.c:2578:19:USB_DeActivateRemoteWakeup 16 static +stm32f1xx_ll_usb.c:2593:6:USB_WritePMA 56 static +stm32f1xx_ll_usb.c:2627:6:USB_ReadPMA 48 static diff --git a/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/subdir.mk b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/subdir.mk new file mode 100644 index 0000000..e7b43ff --- /dev/null +++ b/Maple/Debug/Drivers/STM32F1xx_HAL_Driver/Src/subdir.mk @@ -0,0 +1,94 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c \ +../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c + +OBJS += \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + +C_DEPS += \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.d \ +./Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.d + + +# Each subdirectory must supply rules for building sources it contributes +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Maple/Debug/Maple.bin b/Maple/Debug/Maple.bin new file mode 100755 index 0000000..c5ff738 Binary files /dev/null and b/Maple/Debug/Maple.bin differ diff --git a/Maple/Debug/Maple.elf b/Maple/Debug/Maple.elf new file mode 100755 index 0000000..2376fb0 Binary files /dev/null and b/Maple/Debug/Maple.elf differ diff --git a/Maple/Debug/Maple.list b/Maple/Debug/Maple.list new file mode 100644 index 0000000..2ad4e13 --- /dev/null +++ b/Maple/Debug/Maple.list @@ -0,0 +1,17200 @@ + +Maple.elf: file format elf32-littlearm + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .isr_vector 0000010c 08000000 08000000 00010000 2**0 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 1 .text 00006b84 0800010c 0800010c 0001010c 2**2 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 2 .rodata 00000074 08006c90 08006c90 00016c90 2**2 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 3 .ARM.extab 00000000 08006d04 08006d04 0002017c 2**0 + CONTENTS + 4 .ARM 00000000 08006d04 08006d04 0002017c 2**0 + CONTENTS + 5 .preinit_array 00000000 08006d04 08006d04 0002017c 2**0 + CONTENTS, ALLOC, LOAD, DATA + 6 .init_array 00000004 08006d04 08006d04 00016d04 2**2 + CONTENTS, ALLOC, LOAD, DATA + 7 .fini_array 00000004 08006d08 08006d08 00016d08 2**2 + CONTENTS, ALLOC, LOAD, DATA + 8 .data 0000017c 20000000 08006d0c 00020000 2**2 + CONTENTS, ALLOC, LOAD, DATA + 9 .bss 000011c4 2000017c 08006e88 0002017c 2**2 + ALLOC + 10 ._user_heap_stack 00000600 20001340 08006e88 00021340 2**0 + ALLOC + 11 .ARM.attributes 00000029 00000000 00000000 0002017c 2**0 + CONTENTS, READONLY + 12 .debug_info 000108d1 00000000 00000000 000201a5 2**0 + CONTENTS, READONLY, DEBUGGING + 13 .debug_abbrev 00002928 00000000 00000000 00030a76 2**0 + CONTENTS, READONLY, DEBUGGING + 14 .debug_aranges 00000a68 00000000 00000000 000333a0 2**3 + CONTENTS, READONLY, DEBUGGING + 15 .debug_ranges 00000920 00000000 00000000 00033e08 2**3 + CONTENTS, READONLY, DEBUGGING + 16 .debug_macro 00019605 00000000 00000000 00034728 2**0 + CONTENTS, READONLY, DEBUGGING + 17 .debug_line 0000bc20 00000000 00000000 0004dd2d 2**0 + CONTENTS, READONLY, DEBUGGING + 18 .debug_str 0008477d 00000000 00000000 0005994d 2**0 + CONTENTS, READONLY, DEBUGGING + 19 .comment 0000007b 00000000 00000000 000de0ca 2**0 + CONTENTS, READONLY + 20 .debug_frame 000027c0 00000000 00000000 000de148 2**2 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +0800010c <__do_global_dtors_aux>: + 800010c: b510 push {r4, lr} + 800010e: 4c05 ldr r4, [pc, #20] ; (8000124 <__do_global_dtors_aux+0x18>) + 8000110: 7823 ldrb r3, [r4, #0] + 8000112: b933 cbnz r3, 8000122 <__do_global_dtors_aux+0x16> + 8000114: 4b04 ldr r3, [pc, #16] ; (8000128 <__do_global_dtors_aux+0x1c>) + 8000116: b113 cbz r3, 800011e <__do_global_dtors_aux+0x12> + 8000118: 4804 ldr r0, [pc, #16] ; (800012c <__do_global_dtors_aux+0x20>) + 800011a: f3af 8000 nop.w + 800011e: 2301 movs r3, #1 + 8000120: 7023 strb r3, [r4, #0] + 8000122: bd10 pop {r4, pc} + 8000124: 2000017c .word 0x2000017c + 8000128: 00000000 .word 0x00000000 + 800012c: 08006c78 .word 0x08006c78 + +08000130 : + 8000130: b508 push {r3, lr} + 8000132: 4b03 ldr r3, [pc, #12] ; (8000140 ) + 8000134: b11b cbz r3, 800013e + 8000136: 4903 ldr r1, [pc, #12] ; (8000144 ) + 8000138: 4803 ldr r0, [pc, #12] ; (8000148 ) + 800013a: f3af 8000 nop.w + 800013e: bd08 pop {r3, pc} + 8000140: 00000000 .word 0x00000000 + 8000144: 20000180 .word 0x20000180 + 8000148: 08006c78 .word 0x08006c78 + +0800014c : + 800014c: 4603 mov r3, r0 + 800014e: f813 2b01 ldrb.w r2, [r3], #1 + 8000152: 2a00 cmp r2, #0 + 8000154: d1fb bne.n 800014e + 8000156: 1a18 subs r0, r3, r0 + 8000158: 3801 subs r0, #1 + 800015a: 4770 bx lr + +0800015c
: +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + 800015c: b580 push {r7, lr} + 800015e: b082 sub sp, #8 + 8000160: af00 add r7, sp, #0 + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + 8000162: f000 f97f bl 8000464 + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + 8000166: f000 f837 bl 80001d8 + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + 800016a: f000 f891 bl 8000290 + MX_USB_DEVICE_Init(); + 800016e: f006 f8b3 bl 80062d8 + /* USER CODE BEGIN 2 */ + HAL_GPIO_WritePin(USBE_GPIO_Port, USBE_Pin, GPIO_PIN_RESET); + 8000172: 2200 movs r2, #0 + 8000174: f44f 7100 mov.w r1, #512 ; 0x200 + 8000178: 4815 ldr r0, [pc, #84] ; (80001d0 ) + 800017a: f000 fc5f bl 8000a3c + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_SET); + 800017e: 2201 movs r2, #1 + 8000180: 2102 movs r1, #2 + 8000182: 4813 ldr r0, [pc, #76] ; (80001d0 ) + 8000184: f000 fc5a bl 8000a3c + HAL_Delay(500); + 8000188: f44f 70fa mov.w r0, #500 ; 0x1f4 + 800018c: f000 f9cc bl 8000528 + HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET); + 8000190: 2200 movs r2, #0 + 8000192: 2102 movs r1, #2 + 8000194: 480e ldr r0, [pc, #56] ; (80001d0 ) + 8000196: f000 fc51 bl 8000a3c + HAL_Delay(500); + 800019a: f44f 70fa mov.w r0, #500 ; 0x1f4 + 800019e: f000 f9c3 bl 8000528 + + char msg[]="Hallo\n"; + 80001a2: 4a0c ldr r2, [pc, #48] ; (80001d4 ) + 80001a4: 463b mov r3, r7 + 80001a6: e892 0003 ldmia.w r2, {r0, r1} + 80001aa: 6018 str r0, [r3, #0] + 80001ac: 3304 adds r3, #4 + 80001ae: 8019 strh r1, [r3, #0] + 80001b0: 3302 adds r3, #2 + 80001b2: 0c0a lsrs r2, r1, #16 + 80001b4: 701a strb r2, [r3, #0] + CDC_Transmit_FS((uint8_t*)msg, strlen(msg)); + 80001b6: 463b mov r3, r7 + 80001b8: 4618 mov r0, r3 + 80001ba: f7ff ffc7 bl 800014c + 80001be: 4603 mov r3, r0 + 80001c0: b29a uxth r2, r3 + 80001c2: 463b mov r3, r7 + 80001c4: 4611 mov r1, r2 + 80001c6: 4618 mov r0, r3 + 80001c8: f006 f944 bl 8006454 + { + 80001cc: e7d7 b.n 800017e + 80001ce: bf00 nop + 80001d0: 40010c00 .word 0x40010c00 + 80001d4: 08006c90 .word 0x08006c90 + +080001d8 : +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + 80001d8: b580 push {r7, lr} + 80001da: b094 sub sp, #80 ; 0x50 + 80001dc: af00 add r7, sp, #0 + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + 80001de: f107 0328 add.w r3, r7, #40 ; 0x28 + 80001e2: 2228 movs r2, #40 ; 0x28 + 80001e4: 2100 movs r1, #0 + 80001e6: 4618 mov r0, r3 + 80001e8: f006 fd3e bl 8006c68 + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + 80001ec: f107 0314 add.w r3, r7, #20 + 80001f0: 2200 movs r2, #0 + 80001f2: 601a str r2, [r3, #0] + 80001f4: 605a str r2, [r3, #4] + 80001f6: 609a str r2, [r3, #8] + 80001f8: 60da str r2, [r3, #12] + 80001fa: 611a str r2, [r3, #16] + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + 80001fc: 1d3b adds r3, r7, #4 + 80001fe: 2200 movs r2, #0 + 8000200: 601a str r2, [r3, #0] + 8000202: 605a str r2, [r3, #4] + 8000204: 609a str r2, [r3, #8] + 8000206: 60da str r2, [r3, #12] + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + 8000208: 2301 movs r3, #1 + 800020a: 62bb str r3, [r7, #40] ; 0x28 + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + 800020c: f44f 3380 mov.w r3, #65536 ; 0x10000 + 8000210: 62fb str r3, [r7, #44] ; 0x2c + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + 8000212: 2300 movs r3, #0 + 8000214: 633b str r3, [r7, #48] ; 0x30 + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + 8000216: 2301 movs r3, #1 + 8000218: 63bb str r3, [r7, #56] ; 0x38 + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + 800021a: 2302 movs r3, #2 + 800021c: 647b str r3, [r7, #68] ; 0x44 + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + 800021e: f44f 3380 mov.w r3, #65536 ; 0x10000 + 8000222: 64bb str r3, [r7, #72] ; 0x48 + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + 8000224: f44f 1380 mov.w r3, #1048576 ; 0x100000 + 8000228: 64fb str r3, [r7, #76] ; 0x4c + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + 800022a: f107 0328 add.w r3, r7, #40 ; 0x28 + 800022e: 4618 mov r0, r3 + 8000230: f001 ffa0 bl 8002174 + 8000234: 4603 mov r3, r0 + 8000236: 2b00 cmp r3, #0 + 8000238: d001 beq.n 800023e + { + Error_Handler(); + 800023a: f000 f875 bl 8000328 + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + 800023e: 230f movs r3, #15 + 8000240: 617b str r3, [r7, #20] + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + 8000242: 2302 movs r3, #2 + 8000244: 61bb str r3, [r7, #24] + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + 8000246: 2300 movs r3, #0 + 8000248: 61fb str r3, [r7, #28] + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + 800024a: f44f 6380 mov.w r3, #1024 ; 0x400 + 800024e: 623b str r3, [r7, #32] + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + 8000250: 2300 movs r3, #0 + 8000252: 627b str r3, [r7, #36] ; 0x24 + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + 8000254: f107 0314 add.w r3, r7, #20 + 8000258: 2101 movs r1, #1 + 800025a: 4618 mov r0, r3 + 800025c: f002 fa0a bl 8002674 + 8000260: 4603 mov r3, r0 + 8000262: 2b00 cmp r3, #0 + 8000264: d001 beq.n 800026a + { + Error_Handler(); + 8000266: f000 f85f bl 8000328 + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + 800026a: 2310 movs r3, #16 + 800026c: 607b str r3, [r7, #4] + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + 800026e: f44f 0380 mov.w r3, #4194304 ; 0x400000 + 8000272: 613b str r3, [r7, #16] + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + 8000274: 1d3b adds r3, r7, #4 + 8000276: 4618 mov r0, r3 + 8000278: f002 fb66 bl 8002948 + 800027c: 4603 mov r3, r0 + 800027e: 2b00 cmp r3, #0 + 8000280: d001 beq.n 8000286 + { + Error_Handler(); + 8000282: f000 f851 bl 8000328 + } +} + 8000286: bf00 nop + 8000288: 3750 adds r7, #80 ; 0x50 + 800028a: 46bd mov sp, r7 + 800028c: bd80 pop {r7, pc} + ... + +08000290 : + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + 8000290: b580 push {r7, lr} + 8000292: b088 sub sp, #32 + 8000294: af00 add r7, sp, #0 + GPIO_InitTypeDef GPIO_InitStruct = {0}; + 8000296: f107 0310 add.w r3, r7, #16 + 800029a: 2200 movs r2, #0 + 800029c: 601a str r2, [r3, #0] + 800029e: 605a str r2, [r3, #4] + 80002a0: 609a str r2, [r3, #8] + 80002a2: 60da str r2, [r3, #12] + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOD_CLK_ENABLE(); + 80002a4: 4b1e ldr r3, [pc, #120] ; (8000320 ) + 80002a6: 699b ldr r3, [r3, #24] + 80002a8: 4a1d ldr r2, [pc, #116] ; (8000320 ) + 80002aa: f043 0320 orr.w r3, r3, #32 + 80002ae: 6193 str r3, [r2, #24] + 80002b0: 4b1b ldr r3, [pc, #108] ; (8000320 ) + 80002b2: 699b ldr r3, [r3, #24] + 80002b4: f003 0320 and.w r3, r3, #32 + 80002b8: 60fb str r3, [r7, #12] + 80002ba: 68fb ldr r3, [r7, #12] + __HAL_RCC_GPIOB_CLK_ENABLE(); + 80002bc: 4b18 ldr r3, [pc, #96] ; (8000320 ) + 80002be: 699b ldr r3, [r3, #24] + 80002c0: 4a17 ldr r2, [pc, #92] ; (8000320 ) + 80002c2: f043 0308 orr.w r3, r3, #8 + 80002c6: 6193 str r3, [r2, #24] + 80002c8: 4b15 ldr r3, [pc, #84] ; (8000320 ) + 80002ca: 699b ldr r3, [r3, #24] + 80002cc: f003 0308 and.w r3, r3, #8 + 80002d0: 60bb str r3, [r7, #8] + 80002d2: 68bb ldr r3, [r7, #8] + __HAL_RCC_GPIOA_CLK_ENABLE(); + 80002d4: 4b12 ldr r3, [pc, #72] ; (8000320 ) + 80002d6: 699b ldr r3, [r3, #24] + 80002d8: 4a11 ldr r2, [pc, #68] ; (8000320 ) + 80002da: f043 0304 orr.w r3, r3, #4 + 80002de: 6193 str r3, [r2, #24] + 80002e0: 4b0f ldr r3, [pc, #60] ; (8000320 ) + 80002e2: 699b ldr r3, [r3, #24] + 80002e4: f003 0304 and.w r3, r3, #4 + 80002e8: 607b str r3, [r7, #4] + 80002ea: 687b ldr r3, [r7, #4] + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOB, LED_Pin|USBE_Pin, GPIO_PIN_RESET); + 80002ec: 2200 movs r2, #0 + 80002ee: f240 2102 movw r1, #514 ; 0x202 + 80002f2: 480c ldr r0, [pc, #48] ; (8000324 ) + 80002f4: f000 fba2 bl 8000a3c + + /*Configure GPIO pins : LED_Pin USBE_Pin */ + GPIO_InitStruct.Pin = LED_Pin|USBE_Pin; + 80002f8: f240 2302 movw r3, #514 ; 0x202 + 80002fc: 613b str r3, [r7, #16] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 80002fe: 2301 movs r3, #1 + 8000300: 617b str r3, [r7, #20] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 8000302: 2300 movs r3, #0 + 8000304: 61bb str r3, [r7, #24] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + 8000306: 2302 movs r3, #2 + 8000308: 61fb str r3, [r7, #28] + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + 800030a: f107 0310 add.w r3, r7, #16 + 800030e: 4619 mov r1, r3 + 8000310: 4804 ldr r0, [pc, #16] ; (8000324 ) + 8000312: f000 fa39 bl 8000788 + +} + 8000316: bf00 nop + 8000318: 3720 adds r7, #32 + 800031a: 46bd mov sp, r7 + 800031c: bd80 pop {r7, pc} + 800031e: bf00 nop + 8000320: 40021000 .word 0x40021000 + 8000324: 40010c00 .word 0x40010c00 + +08000328 : +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + 8000328: b480 push {r7} + 800032a: af00 add r7, sp, #0 + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); + 800032c: b672 cpsid i + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + 800032e: e7fe b.n 800032e + +08000330 : +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + 8000330: b480 push {r7} + 8000332: b085 sub sp, #20 + 8000334: af00 add r7, sp, #0 + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_AFIO_CLK_ENABLE(); + 8000336: 4b15 ldr r3, [pc, #84] ; (800038c ) + 8000338: 699b ldr r3, [r3, #24] + 800033a: 4a14 ldr r2, [pc, #80] ; (800038c ) + 800033c: f043 0301 orr.w r3, r3, #1 + 8000340: 6193 str r3, [r2, #24] + 8000342: 4b12 ldr r3, [pc, #72] ; (800038c ) + 8000344: 699b ldr r3, [r3, #24] + 8000346: f003 0301 and.w r3, r3, #1 + 800034a: 60bb str r3, [r7, #8] + 800034c: 68bb ldr r3, [r7, #8] + __HAL_RCC_PWR_CLK_ENABLE(); + 800034e: 4b0f ldr r3, [pc, #60] ; (800038c ) + 8000350: 69db ldr r3, [r3, #28] + 8000352: 4a0e ldr r2, [pc, #56] ; (800038c ) + 8000354: f043 5380 orr.w r3, r3, #268435456 ; 0x10000000 + 8000358: 61d3 str r3, [r2, #28] + 800035a: 4b0c ldr r3, [pc, #48] ; (800038c ) + 800035c: 69db ldr r3, [r3, #28] + 800035e: f003 5380 and.w r3, r3, #268435456 ; 0x10000000 + 8000362: 607b str r3, [r7, #4] + 8000364: 687b ldr r3, [r7, #4] + + /* System interrupt init*/ + + /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled + */ + __HAL_AFIO_REMAP_SWJ_NOJTAG(); + 8000366: 4b0a ldr r3, [pc, #40] ; (8000390 ) + 8000368: 685b ldr r3, [r3, #4] + 800036a: 60fb str r3, [r7, #12] + 800036c: 68fb ldr r3, [r7, #12] + 800036e: f023 63e0 bic.w r3, r3, #117440512 ; 0x7000000 + 8000372: 60fb str r3, [r7, #12] + 8000374: 68fb ldr r3, [r7, #12] + 8000376: f043 7300 orr.w r3, r3, #33554432 ; 0x2000000 + 800037a: 60fb str r3, [r7, #12] + 800037c: 4a04 ldr r2, [pc, #16] ; (8000390 ) + 800037e: 68fb ldr r3, [r7, #12] + 8000380: 6053 str r3, [r2, #4] + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + 8000382: bf00 nop + 8000384: 3714 adds r7, #20 + 8000386: 46bd mov sp, r7 + 8000388: bc80 pop {r7} + 800038a: 4770 bx lr + 800038c: 40021000 .word 0x40021000 + 8000390: 40010000 .word 0x40010000 + +08000394 : +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + 8000394: b480 push {r7} + 8000396: af00 add r7, sp, #0 + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + 8000398: e7fe b.n 8000398 + +0800039a : + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + 800039a: b480 push {r7} + 800039c: af00 add r7, sp, #0 + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + 800039e: e7fe b.n 800039e + +080003a0 : + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + 80003a0: b480 push {r7} + 80003a2: af00 add r7, sp, #0 + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + 80003a4: e7fe b.n 80003a4 + +080003a6 : + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + 80003a6: b480 push {r7} + 80003a8: af00 add r7, sp, #0 + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + 80003aa: e7fe b.n 80003aa + +080003ac : + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + 80003ac: b480 push {r7} + 80003ae: af00 add r7, sp, #0 + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + 80003b0: e7fe b.n 80003b0 + +080003b2 : + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + 80003b2: b480 push {r7} + 80003b4: af00 add r7, sp, #0 + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + 80003b6: bf00 nop + 80003b8: 46bd mov sp, r7 + 80003ba: bc80 pop {r7} + 80003bc: 4770 bx lr + +080003be : + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + 80003be: b480 push {r7} + 80003c0: af00 add r7, sp, #0 + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + 80003c2: bf00 nop + 80003c4: 46bd mov sp, r7 + 80003c6: bc80 pop {r7} + 80003c8: 4770 bx lr + +080003ca : + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + 80003ca: b480 push {r7} + 80003cc: af00 add r7, sp, #0 + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + 80003ce: bf00 nop + 80003d0: 46bd mov sp, r7 + 80003d2: bc80 pop {r7} + 80003d4: 4770 bx lr + +080003d6 : + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + 80003d6: b580 push {r7, lr} + 80003d8: af00 add r7, sp, #0 + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + 80003da: f000 f889 bl 80004f0 + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + 80003de: bf00 nop + 80003e0: bd80 pop {r7, pc} + ... + +080003e4 : + +/** + * @brief This function handles USB high priority or CAN TX interrupts. + */ +void USB_HP_CAN1_TX_IRQHandler(void) +{ + 80003e4: b580 push {r7, lr} + 80003e6: af00 add r7, sp, #0 + /* USER CODE BEGIN USB_HP_CAN1_TX_IRQn 0 */ + + /* USER CODE END USB_HP_CAN1_TX_IRQn 0 */ + HAL_PCD_IRQHandler(&hpcd_USB_FS); + 80003e8: 4802 ldr r0, [pc, #8] ; (80003f4 ) + 80003ea: f000 fc70 bl 8000cce + /* USER CODE BEGIN USB_HP_CAN1_TX_IRQn 1 */ + + /* USER CODE END USB_HP_CAN1_TX_IRQn 1 */ +} + 80003ee: bf00 nop + 80003f0: bd80 pop {r7, pc} + 80003f2: bf00 nop + 80003f4: 20001054 .word 0x20001054 + +080003f8 : + +/** + * @brief This function handles USB low priority or CAN RX0 interrupts. + */ +void USB_LP_CAN1_RX0_IRQHandler(void) +{ + 80003f8: b580 push {r7, lr} + 80003fa: af00 add r7, sp, #0 + /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 0 */ + + /* USER CODE END USB_LP_CAN1_RX0_IRQn 0 */ + HAL_PCD_IRQHandler(&hpcd_USB_FS); + 80003fc: 4802 ldr r0, [pc, #8] ; (8000408 ) + 80003fe: f000 fc66 bl 8000cce + /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 1 */ + + /* USER CODE END USB_LP_CAN1_RX0_IRQn 1 */ +} + 8000402: bf00 nop + 8000404: bd80 pop {r7, pc} + 8000406: bf00 nop + 8000408: 20001054 .word 0x20001054 + +0800040c : + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + 800040c: b480 push {r7} + 800040e: af00 add r7, sp, #0 + + /* Configure the Vector Table location -------------------------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#endif /* USER_VECT_TAB_ADDRESS */ +} + 8000410: bf00 nop + 8000412: 46bd mov sp, r7 + 8000414: bc80 pop {r7} + 8000416: 4770 bx lr + +08000418 : + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + 8000418: 2100 movs r1, #0 + b LoopCopyDataInit + 800041a: e003 b.n 8000424 + +0800041c : + +CopyDataInit: + ldr r3, =_sidata + 800041c: 4b0b ldr r3, [pc, #44] ; (800044c ) + ldr r3, [r3, r1] + 800041e: 585b ldr r3, [r3, r1] + str r3, [r0, r1] + 8000420: 5043 str r3, [r0, r1] + adds r1, r1, #4 + 8000422: 3104 adds r1, #4 + +08000424 : + +LoopCopyDataInit: + ldr r0, =_sdata + 8000424: 480a ldr r0, [pc, #40] ; (8000450 ) + ldr r3, =_edata + 8000426: 4b0b ldr r3, [pc, #44] ; (8000454 ) + adds r2, r0, r1 + 8000428: 1842 adds r2, r0, r1 + cmp r2, r3 + 800042a: 429a cmp r2, r3 + bcc CopyDataInit + 800042c: d3f6 bcc.n 800041c + ldr r2, =_sbss + 800042e: 4a0a ldr r2, [pc, #40] ; (8000458 ) + b LoopFillZerobss + 8000430: e002 b.n 8000438 + +08000432 : +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + 8000432: 2300 movs r3, #0 + str r3, [r2], #4 + 8000434: f842 3b04 str.w r3, [r2], #4 + +08000438 : + +LoopFillZerobss: + ldr r3, = _ebss + 8000438: 4b08 ldr r3, [pc, #32] ; (800045c ) + cmp r2, r3 + 800043a: 429a cmp r2, r3 + bcc FillZerobss + 800043c: d3f9 bcc.n 8000432 + +/* Call the clock system intitialization function.*/ + bl SystemInit + 800043e: f7ff ffe5 bl 800040c +/* Call static constructors */ + bl __libc_init_array + 8000442: f006 fbed bl 8006c20 <__libc_init_array> +/* Call the application's entry point.*/ + bl main + 8000446: f7ff fe89 bl 800015c
+ bx lr + 800044a: 4770 bx lr + ldr r3, =_sidata + 800044c: 08006d0c .word 0x08006d0c + ldr r0, =_sdata + 8000450: 20000000 .word 0x20000000 + ldr r3, =_edata + 8000454: 2000017c .word 0x2000017c + ldr r2, =_sbss + 8000458: 2000017c .word 0x2000017c + ldr r3, = _ebss + 800045c: 20001340 .word 0x20001340 + +08000460 : + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + 8000460: e7fe b.n 8000460 + ... + +08000464 : + * need to ensure that the SysTick time base is always set to 1 millisecond + * to have correct HAL operation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + 8000464: b580 push {r7, lr} + 8000466: af00 add r7, sp, #0 + defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + + /* Prefetch buffer is not available on value line devices */ + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); + 8000468: 4b08 ldr r3, [pc, #32] ; (800048c ) + 800046a: 681b ldr r3, [r3, #0] + 800046c: 4a07 ldr r2, [pc, #28] ; (800048c ) + 800046e: f043 0310 orr.w r3, r3, #16 + 8000472: 6013 str r3, [r2, #0] +#endif +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + 8000474: 2003 movs r0, #3 + 8000476: f000 f945 bl 8000704 + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + HAL_InitTick(TICK_INT_PRIORITY); + 800047a: 2000 movs r0, #0 + 800047c: f000 f808 bl 8000490 + + /* Init the low level hardware */ + HAL_MspInit(); + 8000480: f7ff ff56 bl 8000330 + + /* Return function status */ + return HAL_OK; + 8000484: 2300 movs r3, #0 +} + 8000486: 4618 mov r0, r3 + 8000488: bd80 pop {r7, pc} + 800048a: bf00 nop + 800048c: 40022000 .word 0x40022000 + +08000490 : + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + 8000490: b580 push {r7, lr} + 8000492: b082 sub sp, #8 + 8000494: af00 add r7, sp, #0 + 8000496: 6078 str r0, [r7, #4] + /* Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) + 8000498: 4b12 ldr r3, [pc, #72] ; (80004e4 ) + 800049a: 681a ldr r2, [r3, #0] + 800049c: 4b12 ldr r3, [pc, #72] ; (80004e8 ) + 800049e: 781b ldrb r3, [r3, #0] + 80004a0: 4619 mov r1, r3 + 80004a2: f44f 737a mov.w r3, #1000 ; 0x3e8 + 80004a6: fbb3 f3f1 udiv r3, r3, r1 + 80004aa: fbb2 f3f3 udiv r3, r2, r3 + 80004ae: 4618 mov r0, r3 + 80004b0: f000 f95d bl 800076e + 80004b4: 4603 mov r3, r0 + 80004b6: 2b00 cmp r3, #0 + 80004b8: d001 beq.n 80004be + { + return HAL_ERROR; + 80004ba: 2301 movs r3, #1 + 80004bc: e00e b.n 80004dc + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + 80004be: 687b ldr r3, [r7, #4] + 80004c0: 2b0f cmp r3, #15 + 80004c2: d80a bhi.n 80004da + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + 80004c4: 2200 movs r2, #0 + 80004c6: 6879 ldr r1, [r7, #4] + 80004c8: f04f 30ff mov.w r0, #4294967295 ; 0xffffffff + 80004cc: f000 f925 bl 800071a + uwTickPrio = TickPriority; + 80004d0: 4a06 ldr r2, [pc, #24] ; (80004ec ) + 80004d2: 687b ldr r3, [r7, #4] + 80004d4: 6013 str r3, [r2, #0] + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; + 80004d6: 2300 movs r3, #0 + 80004d8: e000 b.n 80004dc + return HAL_ERROR; + 80004da: 2301 movs r3, #1 +} + 80004dc: 4618 mov r0, r3 + 80004de: 3708 adds r7, #8 + 80004e0: 46bd mov sp, r7 + 80004e2: bd80 pop {r7, pc} + 80004e4: 20000000 .word 0x20000000 + 80004e8: 20000008 .word 0x20000008 + 80004ec: 20000004 .word 0x20000004 + +080004f0 : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + 80004f0: b480 push {r7} + 80004f2: af00 add r7, sp, #0 + uwTick += uwTickFreq; + 80004f4: 4b05 ldr r3, [pc, #20] ; (800050c ) + 80004f6: 781b ldrb r3, [r3, #0] + 80004f8: 461a mov r2, r3 + 80004fa: 4b05 ldr r3, [pc, #20] ; (8000510 ) + 80004fc: 681b ldr r3, [r3, #0] + 80004fe: 4413 add r3, r2 + 8000500: 4a03 ldr r2, [pc, #12] ; (8000510 ) + 8000502: 6013 str r3, [r2, #0] +} + 8000504: bf00 nop + 8000506: 46bd mov sp, r7 + 8000508: bc80 pop {r7} + 800050a: 4770 bx lr + 800050c: 20000008 .word 0x20000008 + 8000510: 200003bc .word 0x200003bc + +08000514 : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + 8000514: b480 push {r7} + 8000516: af00 add r7, sp, #0 + return uwTick; + 8000518: 4b02 ldr r3, [pc, #8] ; (8000524 ) + 800051a: 681b ldr r3, [r3, #0] +} + 800051c: 4618 mov r0, r3 + 800051e: 46bd mov sp, r7 + 8000520: bc80 pop {r7} + 8000522: 4770 bx lr + 8000524: 200003bc .word 0x200003bc + +08000528 : + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + 8000528: b580 push {r7, lr} + 800052a: b084 sub sp, #16 + 800052c: af00 add r7, sp, #0 + 800052e: 6078 str r0, [r7, #4] + uint32_t tickstart = HAL_GetTick(); + 8000530: f7ff fff0 bl 8000514 + 8000534: 60b8 str r0, [r7, #8] + uint32_t wait = Delay; + 8000536: 687b ldr r3, [r7, #4] + 8000538: 60fb str r3, [r7, #12] + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + 800053a: 68fb ldr r3, [r7, #12] + 800053c: f1b3 3fff cmp.w r3, #4294967295 ; 0xffffffff + 8000540: d005 beq.n 800054e + { + wait += (uint32_t)(uwTickFreq); + 8000542: 4b09 ldr r3, [pc, #36] ; (8000568 ) + 8000544: 781b ldrb r3, [r3, #0] + 8000546: 461a mov r2, r3 + 8000548: 68fb ldr r3, [r7, #12] + 800054a: 4413 add r3, r2 + 800054c: 60fb str r3, [r7, #12] + } + + while ((HAL_GetTick() - tickstart) < wait) + 800054e: bf00 nop + 8000550: f7ff ffe0 bl 8000514 + 8000554: 4602 mov r2, r0 + 8000556: 68bb ldr r3, [r7, #8] + 8000558: 1ad3 subs r3, r2, r3 + 800055a: 68fa ldr r2, [r7, #12] + 800055c: 429a cmp r2, r3 + 800055e: d8f7 bhi.n 8000550 + { + } +} + 8000560: bf00 nop + 8000562: 3710 adds r7, #16 + 8000564: 46bd mov sp, r7 + 8000566: bd80 pop {r7, pc} + 8000568: 20000008 .word 0x20000008 + +0800056c <__NVIC_SetPriorityGrouping>: + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + 800056c: b480 push {r7} + 800056e: b085 sub sp, #20 + 8000570: af00 add r7, sp, #0 + 8000572: 6078 str r0, [r7, #4] + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + 8000574: 687b ldr r3, [r7, #4] + 8000576: f003 0307 and.w r3, r3, #7 + 800057a: 60fb str r3, [r7, #12] + + reg_value = SCB->AIRCR; /* read old register configuration */ + 800057c: 4b0c ldr r3, [pc, #48] ; (80005b0 <__NVIC_SetPriorityGrouping+0x44>) + 800057e: 68db ldr r3, [r3, #12] + 8000580: 60bb str r3, [r7, #8] + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + 8000582: 68ba ldr r2, [r7, #8] + 8000584: f64f 03ff movw r3, #63743 ; 0xf8ff + 8000588: 4013 ands r3, r2 + 800058a: 60bb str r3, [r7, #8] + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + 800058c: 68fb ldr r3, [r7, #12] + 800058e: 021a lsls r2, r3, #8 + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + 8000590: 68bb ldr r3, [r7, #8] + 8000592: 4313 orrs r3, r2 + reg_value = (reg_value | + 8000594: f043 63bf orr.w r3, r3, #100139008 ; 0x5f80000 + 8000598: f443 3300 orr.w r3, r3, #131072 ; 0x20000 + 800059c: 60bb str r3, [r7, #8] + SCB->AIRCR = reg_value; + 800059e: 4a04 ldr r2, [pc, #16] ; (80005b0 <__NVIC_SetPriorityGrouping+0x44>) + 80005a0: 68bb ldr r3, [r7, #8] + 80005a2: 60d3 str r3, [r2, #12] +} + 80005a4: bf00 nop + 80005a6: 3714 adds r7, #20 + 80005a8: 46bd mov sp, r7 + 80005aa: bc80 pop {r7} + 80005ac: 4770 bx lr + 80005ae: bf00 nop + 80005b0: e000ed00 .word 0xe000ed00 + +080005b4 <__NVIC_GetPriorityGrouping>: + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + 80005b4: b480 push {r7} + 80005b6: af00 add r7, sp, #0 + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); + 80005b8: 4b04 ldr r3, [pc, #16] ; (80005cc <__NVIC_GetPriorityGrouping+0x18>) + 80005ba: 68db ldr r3, [r3, #12] + 80005bc: 0a1b lsrs r3, r3, #8 + 80005be: f003 0307 and.w r3, r3, #7 +} + 80005c2: 4618 mov r0, r3 + 80005c4: 46bd mov sp, r7 + 80005c6: bc80 pop {r7} + 80005c8: 4770 bx lr + 80005ca: bf00 nop + 80005cc: e000ed00 .word 0xe000ed00 + +080005d0 <__NVIC_EnableIRQ>: + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + 80005d0: b480 push {r7} + 80005d2: b083 sub sp, #12 + 80005d4: af00 add r7, sp, #0 + 80005d6: 4603 mov r3, r0 + 80005d8: 71fb strb r3, [r7, #7] + if ((int32_t)(IRQn) >= 0) + 80005da: f997 3007 ldrsb.w r3, [r7, #7] + 80005de: 2b00 cmp r3, #0 + 80005e0: db0b blt.n 80005fa <__NVIC_EnableIRQ+0x2a> + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + 80005e2: 79fb ldrb r3, [r7, #7] + 80005e4: f003 021f and.w r2, r3, #31 + 80005e8: 4906 ldr r1, [pc, #24] ; (8000604 <__NVIC_EnableIRQ+0x34>) + 80005ea: f997 3007 ldrsb.w r3, [r7, #7] + 80005ee: 095b lsrs r3, r3, #5 + 80005f0: 2001 movs r0, #1 + 80005f2: fa00 f202 lsl.w r2, r0, r2 + 80005f6: f841 2023 str.w r2, [r1, r3, lsl #2] + } +} + 80005fa: bf00 nop + 80005fc: 370c adds r7, #12 + 80005fe: 46bd mov sp, r7 + 8000600: bc80 pop {r7} + 8000602: 4770 bx lr + 8000604: e000e100 .word 0xe000e100 + +08000608 <__NVIC_SetPriority>: + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + 8000608: b480 push {r7} + 800060a: b083 sub sp, #12 + 800060c: af00 add r7, sp, #0 + 800060e: 4603 mov r3, r0 + 8000610: 6039 str r1, [r7, #0] + 8000612: 71fb strb r3, [r7, #7] + if ((int32_t)(IRQn) >= 0) + 8000614: f997 3007 ldrsb.w r3, [r7, #7] + 8000618: 2b00 cmp r3, #0 + 800061a: db0a blt.n 8000632 <__NVIC_SetPriority+0x2a> + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + 800061c: 683b ldr r3, [r7, #0] + 800061e: b2da uxtb r2, r3 + 8000620: 490c ldr r1, [pc, #48] ; (8000654 <__NVIC_SetPriority+0x4c>) + 8000622: f997 3007 ldrsb.w r3, [r7, #7] + 8000626: 0112 lsls r2, r2, #4 + 8000628: b2d2 uxtb r2, r2 + 800062a: 440b add r3, r1 + 800062c: f883 2300 strb.w r2, [r3, #768] ; 0x300 + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + 8000630: e00a b.n 8000648 <__NVIC_SetPriority+0x40> + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + 8000632: 683b ldr r3, [r7, #0] + 8000634: b2da uxtb r2, r3 + 8000636: 4908 ldr r1, [pc, #32] ; (8000658 <__NVIC_SetPriority+0x50>) + 8000638: 79fb ldrb r3, [r7, #7] + 800063a: f003 030f and.w r3, r3, #15 + 800063e: 3b04 subs r3, #4 + 8000640: 0112 lsls r2, r2, #4 + 8000642: b2d2 uxtb r2, r2 + 8000644: 440b add r3, r1 + 8000646: 761a strb r2, [r3, #24] +} + 8000648: bf00 nop + 800064a: 370c adds r7, #12 + 800064c: 46bd mov sp, r7 + 800064e: bc80 pop {r7} + 8000650: 4770 bx lr + 8000652: bf00 nop + 8000654: e000e100 .word 0xe000e100 + 8000658: e000ed00 .word 0xe000ed00 + +0800065c : + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + 800065c: b480 push {r7} + 800065e: b089 sub sp, #36 ; 0x24 + 8000660: af00 add r7, sp, #0 + 8000662: 60f8 str r0, [r7, #12] + 8000664: 60b9 str r1, [r7, #8] + 8000666: 607a str r2, [r7, #4] + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + 8000668: 68fb ldr r3, [r7, #12] + 800066a: f003 0307 and.w r3, r3, #7 + 800066e: 61fb str r3, [r7, #28] + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + 8000670: 69fb ldr r3, [r7, #28] + 8000672: f1c3 0307 rsb r3, r3, #7 + 8000676: 2b04 cmp r3, #4 + 8000678: bf28 it cs + 800067a: 2304 movcs r3, #4 + 800067c: 61bb str r3, [r7, #24] + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + 800067e: 69fb ldr r3, [r7, #28] + 8000680: 3304 adds r3, #4 + 8000682: 2b06 cmp r3, #6 + 8000684: d902 bls.n 800068c + 8000686: 69fb ldr r3, [r7, #28] + 8000688: 3b03 subs r3, #3 + 800068a: e000 b.n 800068e + 800068c: 2300 movs r3, #0 + 800068e: 617b str r3, [r7, #20] + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + 8000690: f04f 32ff mov.w r2, #4294967295 ; 0xffffffff + 8000694: 69bb ldr r3, [r7, #24] + 8000696: fa02 f303 lsl.w r3, r2, r3 + 800069a: 43da mvns r2, r3 + 800069c: 68bb ldr r3, [r7, #8] + 800069e: 401a ands r2, r3 + 80006a0: 697b ldr r3, [r7, #20] + 80006a2: 409a lsls r2, r3 + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + 80006a4: f04f 31ff mov.w r1, #4294967295 ; 0xffffffff + 80006a8: 697b ldr r3, [r7, #20] + 80006aa: fa01 f303 lsl.w r3, r1, r3 + 80006ae: 43d9 mvns r1, r3 + 80006b0: 687b ldr r3, [r7, #4] + 80006b2: 400b ands r3, r1 + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + 80006b4: 4313 orrs r3, r2 + ); +} + 80006b6: 4618 mov r0, r3 + 80006b8: 3724 adds r7, #36 ; 0x24 + 80006ba: 46bd mov sp, r7 + 80006bc: bc80 pop {r7} + 80006be: 4770 bx lr + +080006c0 : + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + 80006c0: b580 push {r7, lr} + 80006c2: b082 sub sp, #8 + 80006c4: af00 add r7, sp, #0 + 80006c6: 6078 str r0, [r7, #4] + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + 80006c8: 687b ldr r3, [r7, #4] + 80006ca: 3b01 subs r3, #1 + 80006cc: f1b3 7f80 cmp.w r3, #16777216 ; 0x1000000 + 80006d0: d301 bcc.n 80006d6 + { + return (1UL); /* Reload value impossible */ + 80006d2: 2301 movs r3, #1 + 80006d4: e00f b.n 80006f6 + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + 80006d6: 4a0a ldr r2, [pc, #40] ; (8000700 ) + 80006d8: 687b ldr r3, [r7, #4] + 80006da: 3b01 subs r3, #1 + 80006dc: 6053 str r3, [r2, #4] + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + 80006de: 210f movs r1, #15 + 80006e0: f04f 30ff mov.w r0, #4294967295 ; 0xffffffff + 80006e4: f7ff ff90 bl 8000608 <__NVIC_SetPriority> + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + 80006e8: 4b05 ldr r3, [pc, #20] ; (8000700 ) + 80006ea: 2200 movs r2, #0 + 80006ec: 609a str r2, [r3, #8] + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + 80006ee: 4b04 ldr r3, [pc, #16] ; (8000700 ) + 80006f0: 2207 movs r2, #7 + 80006f2: 601a str r2, [r3, #0] + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ + 80006f4: 2300 movs r3, #0 +} + 80006f6: 4618 mov r0, r3 + 80006f8: 3708 adds r7, #8 + 80006fa: 46bd mov sp, r7 + 80006fc: bd80 pop {r7, pc} + 80006fe: bf00 nop + 8000700: e000e010 .word 0xe000e010 + +08000704 : + * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + 8000704: b580 push {r7, lr} + 8000706: b082 sub sp, #8 + 8000708: af00 add r7, sp, #0 + 800070a: 6078 str r0, [r7, #4] + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); + 800070c: 6878 ldr r0, [r7, #4] + 800070e: f7ff ff2d bl 800056c <__NVIC_SetPriorityGrouping> +} + 8000712: bf00 nop + 8000714: 3708 adds r7, #8 + 8000716: 46bd mov sp, r7 + 8000718: bd80 pop {r7, pc} + +0800071a : + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + 800071a: b580 push {r7, lr} + 800071c: b086 sub sp, #24 + 800071e: af00 add r7, sp, #0 + 8000720: 4603 mov r3, r0 + 8000722: 60b9 str r1, [r7, #8] + 8000724: 607a str r2, [r7, #4] + 8000726: 73fb strb r3, [r7, #15] + uint32_t prioritygroup = 0x00U; + 8000728: 2300 movs r3, #0 + 800072a: 617b str r3, [r7, #20] + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + 800072c: f7ff ff42 bl 80005b4 <__NVIC_GetPriorityGrouping> + 8000730: 6178 str r0, [r7, #20] + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); + 8000732: 687a ldr r2, [r7, #4] + 8000734: 68b9 ldr r1, [r7, #8] + 8000736: 6978 ldr r0, [r7, #20] + 8000738: f7ff ff90 bl 800065c + 800073c: 4602 mov r2, r0 + 800073e: f997 300f ldrsb.w r3, [r7, #15] + 8000742: 4611 mov r1, r2 + 8000744: 4618 mov r0, r3 + 8000746: f7ff ff5f bl 8000608 <__NVIC_SetPriority> +} + 800074a: bf00 nop + 800074c: 3718 adds r7, #24 + 800074e: 46bd mov sp, r7 + 8000750: bd80 pop {r7, pc} + +08000752 : + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + 8000752: b580 push {r7, lr} + 8000754: b082 sub sp, #8 + 8000756: af00 add r7, sp, #0 + 8000758: 4603 mov r3, r0 + 800075a: 71fb strb r3, [r7, #7] + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); + 800075c: f997 3007 ldrsb.w r3, [r7, #7] + 8000760: 4618 mov r0, r3 + 8000762: f7ff ff35 bl 80005d0 <__NVIC_EnableIRQ> +} + 8000766: bf00 nop + 8000768: 3708 adds r7, #8 + 800076a: 46bd mov sp, r7 + 800076c: bd80 pop {r7, pc} + +0800076e : + * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + 800076e: b580 push {r7, lr} + 8000770: b082 sub sp, #8 + 8000772: af00 add r7, sp, #0 + 8000774: 6078 str r0, [r7, #4] + return SysTick_Config(TicksNumb); + 8000776: 6878 ldr r0, [r7, #4] + 8000778: f7ff ffa2 bl 80006c0 + 800077c: 4603 mov r3, r0 +} + 800077e: 4618 mov r0, r3 + 8000780: 3708 adds r7, #8 + 8000782: 46bd mov sp, r7 + 8000784: bd80 pop {r7, pc} + ... + +08000788 : + * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + 8000788: b480 push {r7} + 800078a: b08b sub sp, #44 ; 0x2c + 800078c: af00 add r7, sp, #0 + 800078e: 6078 str r0, [r7, #4] + 8000790: 6039 str r1, [r7, #0] + uint32_t position = 0x00u; + 8000792: 2300 movs r3, #0 + 8000794: 627b str r3, [r7, #36] ; 0x24 + uint32_t ioposition; + uint32_t iocurrent; + uint32_t temp; + uint32_t config = 0x00u; + 8000796: 2300 movs r3, #0 + 8000798: 623b str r3, [r7, #32] + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + 800079a: e127 b.n 80009ec + { + /* Get the IO position */ + ioposition = (0x01uL << position); + 800079c: 2201 movs r2, #1 + 800079e: 6a7b ldr r3, [r7, #36] ; 0x24 + 80007a0: fa02 f303 lsl.w r3, r2, r3 + 80007a4: 61fb str r3, [r7, #28] + + /* Get the current IO position */ + iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; + 80007a6: 683b ldr r3, [r7, #0] + 80007a8: 681b ldr r3, [r3, #0] + 80007aa: 69fa ldr r2, [r7, #28] + 80007ac: 4013 ands r3, r2 + 80007ae: 61bb str r3, [r7, #24] + + if (iocurrent == ioposition) + 80007b0: 69ba ldr r2, [r7, #24] + 80007b2: 69fb ldr r3, [r7, #28] + 80007b4: 429a cmp r2, r3 + 80007b6: f040 8116 bne.w 80009e6 + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + + /* Based on the required mode, filling config variable with MODEy[1:0] and CNFy[3:2] corresponding bits */ + switch (GPIO_Init->Mode) + 80007ba: 683b ldr r3, [r7, #0] + 80007bc: 685b ldr r3, [r3, #4] + 80007be: 2b12 cmp r3, #18 + 80007c0: d034 beq.n 800082c + 80007c2: 2b12 cmp r3, #18 + 80007c4: d80d bhi.n 80007e2 + 80007c6: 2b02 cmp r3, #2 + 80007c8: d02b beq.n 8000822 + 80007ca: 2b02 cmp r3, #2 + 80007cc: d804 bhi.n 80007d8 + 80007ce: 2b00 cmp r3, #0 + 80007d0: d031 beq.n 8000836 + 80007d2: 2b01 cmp r3, #1 + 80007d4: d01c beq.n 8000810 + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_ANALOG; + break; + + /* Parameters are checked with assert_param */ + default: + break; + 80007d6: e048 b.n 800086a + switch (GPIO_Init->Mode) + 80007d8: 2b03 cmp r3, #3 + 80007da: d043 beq.n 8000864 + 80007dc: 2b11 cmp r3, #17 + 80007de: d01b beq.n 8000818 + break; + 80007e0: e043 b.n 800086a + switch (GPIO_Init->Mode) + 80007e2: 4a89 ldr r2, [pc, #548] ; (8000a08 ) + 80007e4: 4293 cmp r3, r2 + 80007e6: d026 beq.n 8000836 + 80007e8: 4a87 ldr r2, [pc, #540] ; (8000a08 ) + 80007ea: 4293 cmp r3, r2 + 80007ec: d806 bhi.n 80007fc + 80007ee: 4a87 ldr r2, [pc, #540] ; (8000a0c ) + 80007f0: 4293 cmp r3, r2 + 80007f2: d020 beq.n 8000836 + 80007f4: 4a86 ldr r2, [pc, #536] ; (8000a10 ) + 80007f6: 4293 cmp r3, r2 + 80007f8: d01d beq.n 8000836 + break; + 80007fa: e036 b.n 800086a + switch (GPIO_Init->Mode) + 80007fc: 4a85 ldr r2, [pc, #532] ; (8000a14 ) + 80007fe: 4293 cmp r3, r2 + 8000800: d019 beq.n 8000836 + 8000802: 4a85 ldr r2, [pc, #532] ; (8000a18 ) + 8000804: 4293 cmp r3, r2 + 8000806: d016 beq.n 8000836 + 8000808: 4a84 ldr r2, [pc, #528] ; (8000a1c ) + 800080a: 4293 cmp r3, r2 + 800080c: d013 beq.n 8000836 + break; + 800080e: e02c b.n 800086a + config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_PP; + 8000810: 683b ldr r3, [r7, #0] + 8000812: 68db ldr r3, [r3, #12] + 8000814: 623b str r3, [r7, #32] + break; + 8000816: e028 b.n 800086a + config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_OD; + 8000818: 683b ldr r3, [r7, #0] + 800081a: 68db ldr r3, [r3, #12] + 800081c: 3304 adds r3, #4 + 800081e: 623b str r3, [r7, #32] + break; + 8000820: e023 b.n 800086a + config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_PP; + 8000822: 683b ldr r3, [r7, #0] + 8000824: 68db ldr r3, [r3, #12] + 8000826: 3308 adds r3, #8 + 8000828: 623b str r3, [r7, #32] + break; + 800082a: e01e b.n 800086a + config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_OD; + 800082c: 683b ldr r3, [r7, #0] + 800082e: 68db ldr r3, [r3, #12] + 8000830: 330c adds r3, #12 + 8000832: 623b str r3, [r7, #32] + break; + 8000834: e019 b.n 800086a + if (GPIO_Init->Pull == GPIO_NOPULL) + 8000836: 683b ldr r3, [r7, #0] + 8000838: 689b ldr r3, [r3, #8] + 800083a: 2b00 cmp r3, #0 + 800083c: d102 bne.n 8000844 + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_FLOATING; + 800083e: 2304 movs r3, #4 + 8000840: 623b str r3, [r7, #32] + break; + 8000842: e012 b.n 800086a + else if (GPIO_Init->Pull == GPIO_PULLUP) + 8000844: 683b ldr r3, [r7, #0] + 8000846: 689b ldr r3, [r3, #8] + 8000848: 2b01 cmp r3, #1 + 800084a: d105 bne.n 8000858 + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; + 800084c: 2308 movs r3, #8 + 800084e: 623b str r3, [r7, #32] + GPIOx->BSRR = ioposition; + 8000850: 687b ldr r3, [r7, #4] + 8000852: 69fa ldr r2, [r7, #28] + 8000854: 611a str r2, [r3, #16] + break; + 8000856: e008 b.n 800086a + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; + 8000858: 2308 movs r3, #8 + 800085a: 623b str r3, [r7, #32] + GPIOx->BRR = ioposition; + 800085c: 687b ldr r3, [r7, #4] + 800085e: 69fa ldr r2, [r7, #28] + 8000860: 615a str r2, [r3, #20] + break; + 8000862: e002 b.n 800086a + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_ANALOG; + 8000864: 2300 movs r3, #0 + 8000866: 623b str r3, [r7, #32] + break; + 8000868: bf00 nop + } + + /* Check if the current bit belongs to first half or last half of the pin count number + in order to address CRH or CRL register*/ + configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH; + 800086a: 69bb ldr r3, [r7, #24] + 800086c: 2bff cmp r3, #255 ; 0xff + 800086e: d801 bhi.n 8000874 + 8000870: 687b ldr r3, [r7, #4] + 8000872: e001 b.n 8000878 + 8000874: 687b ldr r3, [r7, #4] + 8000876: 3304 adds r3, #4 + 8000878: 617b str r3, [r7, #20] + registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2u) : ((position - 8u) << 2u); + 800087a: 69bb ldr r3, [r7, #24] + 800087c: 2bff cmp r3, #255 ; 0xff + 800087e: d802 bhi.n 8000886 + 8000880: 6a7b ldr r3, [r7, #36] ; 0x24 + 8000882: 009b lsls r3, r3, #2 + 8000884: e002 b.n 800088c + 8000886: 6a7b ldr r3, [r7, #36] ; 0x24 + 8000888: 3b08 subs r3, #8 + 800088a: 009b lsls r3, r3, #2 + 800088c: 613b str r3, [r7, #16] + + /* Apply the new configuration of the pin to the register */ + MODIFY_REG((*configregister), ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset), (config << registeroffset)); + 800088e: 697b ldr r3, [r7, #20] + 8000890: 681a ldr r2, [r3, #0] + 8000892: 210f movs r1, #15 + 8000894: 693b ldr r3, [r7, #16] + 8000896: fa01 f303 lsl.w r3, r1, r3 + 800089a: 43db mvns r3, r3 + 800089c: 401a ands r2, r3 + 800089e: 6a39 ldr r1, [r7, #32] + 80008a0: 693b ldr r3, [r7, #16] + 80008a2: fa01 f303 lsl.w r3, r1, r3 + 80008a6: 431a orrs r2, r3 + 80008a8: 697b ldr r3, [r7, #20] + 80008aa: 601a str r2, [r3, #0] + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + 80008ac: 683b ldr r3, [r7, #0] + 80008ae: 685b ldr r3, [r3, #4] + 80008b0: f003 5380 and.w r3, r3, #268435456 ; 0x10000000 + 80008b4: 2b00 cmp r3, #0 + 80008b6: f000 8096 beq.w 80009e6 + { + /* Enable AFIO Clock */ + __HAL_RCC_AFIO_CLK_ENABLE(); + 80008ba: 4b59 ldr r3, [pc, #356] ; (8000a20 ) + 80008bc: 699b ldr r3, [r3, #24] + 80008be: 4a58 ldr r2, [pc, #352] ; (8000a20 ) + 80008c0: f043 0301 orr.w r3, r3, #1 + 80008c4: 6193 str r3, [r2, #24] + 80008c6: 4b56 ldr r3, [pc, #344] ; (8000a20 ) + 80008c8: 699b ldr r3, [r3, #24] + 80008ca: f003 0301 and.w r3, r3, #1 + 80008ce: 60bb str r3, [r7, #8] + 80008d0: 68bb ldr r3, [r7, #8] + temp = AFIO->EXTICR[position >> 2u]; + 80008d2: 4a54 ldr r2, [pc, #336] ; (8000a24 ) + 80008d4: 6a7b ldr r3, [r7, #36] ; 0x24 + 80008d6: 089b lsrs r3, r3, #2 + 80008d8: 3302 adds r3, #2 + 80008da: f852 3023 ldr.w r3, [r2, r3, lsl #2] + 80008de: 60fb str r3, [r7, #12] + CLEAR_BIT(temp, (0x0Fu) << (4u * (position & 0x03u))); + 80008e0: 6a7b ldr r3, [r7, #36] ; 0x24 + 80008e2: f003 0303 and.w r3, r3, #3 + 80008e6: 009b lsls r3, r3, #2 + 80008e8: 220f movs r2, #15 + 80008ea: fa02 f303 lsl.w r3, r2, r3 + 80008ee: 43db mvns r3, r3 + 80008f0: 68fa ldr r2, [r7, #12] + 80008f2: 4013 ands r3, r2 + 80008f4: 60fb str r3, [r7, #12] + SET_BIT(temp, (GPIO_GET_INDEX(GPIOx)) << (4u * (position & 0x03u))); + 80008f6: 687b ldr r3, [r7, #4] + 80008f8: 4a4b ldr r2, [pc, #300] ; (8000a28 ) + 80008fa: 4293 cmp r3, r2 + 80008fc: d013 beq.n 8000926 + 80008fe: 687b ldr r3, [r7, #4] + 8000900: 4a4a ldr r2, [pc, #296] ; (8000a2c ) + 8000902: 4293 cmp r3, r2 + 8000904: d00d beq.n 8000922 + 8000906: 687b ldr r3, [r7, #4] + 8000908: 4a49 ldr r2, [pc, #292] ; (8000a30 ) + 800090a: 4293 cmp r3, r2 + 800090c: d007 beq.n 800091e + 800090e: 687b ldr r3, [r7, #4] + 8000910: 4a48 ldr r2, [pc, #288] ; (8000a34 ) + 8000912: 4293 cmp r3, r2 + 8000914: d101 bne.n 800091a + 8000916: 2303 movs r3, #3 + 8000918: e006 b.n 8000928 + 800091a: 2304 movs r3, #4 + 800091c: e004 b.n 8000928 + 800091e: 2302 movs r3, #2 + 8000920: e002 b.n 8000928 + 8000922: 2301 movs r3, #1 + 8000924: e000 b.n 8000928 + 8000926: 2300 movs r3, #0 + 8000928: 6a7a ldr r2, [r7, #36] ; 0x24 + 800092a: f002 0203 and.w r2, r2, #3 + 800092e: 0092 lsls r2, r2, #2 + 8000930: 4093 lsls r3, r2 + 8000932: 68fa ldr r2, [r7, #12] + 8000934: 4313 orrs r3, r2 + 8000936: 60fb str r3, [r7, #12] + AFIO->EXTICR[position >> 2u] = temp; + 8000938: 493a ldr r1, [pc, #232] ; (8000a24 ) + 800093a: 6a7b ldr r3, [r7, #36] ; 0x24 + 800093c: 089b lsrs r3, r3, #2 + 800093e: 3302 adds r3, #2 + 8000940: 68fa ldr r2, [r7, #12] + 8000942: f841 2023 str.w r2, [r1, r3, lsl #2] + + + /* Configure the interrupt mask */ + if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + 8000946: 683b ldr r3, [r7, #0] + 8000948: 685b ldr r3, [r3, #4] + 800094a: f403 3380 and.w r3, r3, #65536 ; 0x10000 + 800094e: 2b00 cmp r3, #0 + 8000950: d006 beq.n 8000960 + { + SET_BIT(EXTI->IMR, iocurrent); + 8000952: 4b39 ldr r3, [pc, #228] ; (8000a38 ) + 8000954: 681a ldr r2, [r3, #0] + 8000956: 4938 ldr r1, [pc, #224] ; (8000a38 ) + 8000958: 69bb ldr r3, [r7, #24] + 800095a: 4313 orrs r3, r2 + 800095c: 600b str r3, [r1, #0] + 800095e: e006 b.n 800096e + } + else + { + CLEAR_BIT(EXTI->IMR, iocurrent); + 8000960: 4b35 ldr r3, [pc, #212] ; (8000a38 ) + 8000962: 681a ldr r2, [r3, #0] + 8000964: 69bb ldr r3, [r7, #24] + 8000966: 43db mvns r3, r3 + 8000968: 4933 ldr r1, [pc, #204] ; (8000a38 ) + 800096a: 4013 ands r3, r2 + 800096c: 600b str r3, [r1, #0] + } + + /* Configure the event mask */ + if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + 800096e: 683b ldr r3, [r7, #0] + 8000970: 685b ldr r3, [r3, #4] + 8000972: f403 3300 and.w r3, r3, #131072 ; 0x20000 + 8000976: 2b00 cmp r3, #0 + 8000978: d006 beq.n 8000988 + { + SET_BIT(EXTI->EMR, iocurrent); + 800097a: 4b2f ldr r3, [pc, #188] ; (8000a38 ) + 800097c: 685a ldr r2, [r3, #4] + 800097e: 492e ldr r1, [pc, #184] ; (8000a38 ) + 8000980: 69bb ldr r3, [r7, #24] + 8000982: 4313 orrs r3, r2 + 8000984: 604b str r3, [r1, #4] + 8000986: e006 b.n 8000996 + } + else + { + CLEAR_BIT(EXTI->EMR, iocurrent); + 8000988: 4b2b ldr r3, [pc, #172] ; (8000a38 ) + 800098a: 685a ldr r2, [r3, #4] + 800098c: 69bb ldr r3, [r7, #24] + 800098e: 43db mvns r3, r3 + 8000990: 4929 ldr r1, [pc, #164] ; (8000a38 ) + 8000992: 4013 ands r3, r2 + 8000994: 604b str r3, [r1, #4] + } + + /* Enable or disable the rising trigger */ + if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + 8000996: 683b ldr r3, [r7, #0] + 8000998: 685b ldr r3, [r3, #4] + 800099a: f403 1380 and.w r3, r3, #1048576 ; 0x100000 + 800099e: 2b00 cmp r3, #0 + 80009a0: d006 beq.n 80009b0 + { + SET_BIT(EXTI->RTSR, iocurrent); + 80009a2: 4b25 ldr r3, [pc, #148] ; (8000a38 ) + 80009a4: 689a ldr r2, [r3, #8] + 80009a6: 4924 ldr r1, [pc, #144] ; (8000a38 ) + 80009a8: 69bb ldr r3, [r7, #24] + 80009aa: 4313 orrs r3, r2 + 80009ac: 608b str r3, [r1, #8] + 80009ae: e006 b.n 80009be + } + else + { + CLEAR_BIT(EXTI->RTSR, iocurrent); + 80009b0: 4b21 ldr r3, [pc, #132] ; (8000a38 ) + 80009b2: 689a ldr r2, [r3, #8] + 80009b4: 69bb ldr r3, [r7, #24] + 80009b6: 43db mvns r3, r3 + 80009b8: 491f ldr r1, [pc, #124] ; (8000a38 ) + 80009ba: 4013 ands r3, r2 + 80009bc: 608b str r3, [r1, #8] + } + + /* Enable or disable the falling trigger */ + if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + 80009be: 683b ldr r3, [r7, #0] + 80009c0: 685b ldr r3, [r3, #4] + 80009c2: f403 1300 and.w r3, r3, #2097152 ; 0x200000 + 80009c6: 2b00 cmp r3, #0 + 80009c8: d006 beq.n 80009d8 + { + SET_BIT(EXTI->FTSR, iocurrent); + 80009ca: 4b1b ldr r3, [pc, #108] ; (8000a38 ) + 80009cc: 68da ldr r2, [r3, #12] + 80009ce: 491a ldr r1, [pc, #104] ; (8000a38 ) + 80009d0: 69bb ldr r3, [r7, #24] + 80009d2: 4313 orrs r3, r2 + 80009d4: 60cb str r3, [r1, #12] + 80009d6: e006 b.n 80009e6 + } + else + { + CLEAR_BIT(EXTI->FTSR, iocurrent); + 80009d8: 4b17 ldr r3, [pc, #92] ; (8000a38 ) + 80009da: 68da ldr r2, [r3, #12] + 80009dc: 69bb ldr r3, [r7, #24] + 80009de: 43db mvns r3, r3 + 80009e0: 4915 ldr r1, [pc, #84] ; (8000a38 ) + 80009e2: 4013 ands r3, r2 + 80009e4: 60cb str r3, [r1, #12] + } + } + } + + position++; + 80009e6: 6a7b ldr r3, [r7, #36] ; 0x24 + 80009e8: 3301 adds r3, #1 + 80009ea: 627b str r3, [r7, #36] ; 0x24 + while (((GPIO_Init->Pin) >> position) != 0x00u) + 80009ec: 683b ldr r3, [r7, #0] + 80009ee: 681a ldr r2, [r3, #0] + 80009f0: 6a7b ldr r3, [r7, #36] ; 0x24 + 80009f2: fa22 f303 lsr.w r3, r2, r3 + 80009f6: 2b00 cmp r3, #0 + 80009f8: f47f aed0 bne.w 800079c + } +} + 80009fc: bf00 nop + 80009fe: 372c adds r7, #44 ; 0x2c + 8000a00: 46bd mov sp, r7 + 8000a02: bc80 pop {r7} + 8000a04: 4770 bx lr + 8000a06: bf00 nop + 8000a08: 10210000 .word 0x10210000 + 8000a0c: 10110000 .word 0x10110000 + 8000a10: 10120000 .word 0x10120000 + 8000a14: 10310000 .word 0x10310000 + 8000a18: 10320000 .word 0x10320000 + 8000a1c: 10220000 .word 0x10220000 + 8000a20: 40021000 .word 0x40021000 + 8000a24: 40010000 .word 0x40010000 + 8000a28: 40010800 .word 0x40010800 + 8000a2c: 40010c00 .word 0x40010c00 + 8000a30: 40011000 .word 0x40011000 + 8000a34: 40011400 .word 0x40011400 + 8000a38: 40010400 .word 0x40010400 + +08000a3c : + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + 8000a3c: b480 push {r7} + 8000a3e: b083 sub sp, #12 + 8000a40: af00 add r7, sp, #0 + 8000a42: 6078 str r0, [r7, #4] + 8000a44: 460b mov r3, r1 + 8000a46: 807b strh r3, [r7, #2] + 8000a48: 4613 mov r3, r2 + 8000a4a: 707b strb r3, [r7, #1] + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + 8000a4c: 787b ldrb r3, [r7, #1] + 8000a4e: 2b00 cmp r3, #0 + 8000a50: d003 beq.n 8000a5a + { + GPIOx->BSRR = GPIO_Pin; + 8000a52: 887a ldrh r2, [r7, #2] + 8000a54: 687b ldr r3, [r7, #4] + 8000a56: 611a str r2, [r3, #16] + } + else + { + GPIOx->BSRR = (uint32_t)GPIO_Pin << 16u; + } +} + 8000a58: e003 b.n 8000a62 + GPIOx->BSRR = (uint32_t)GPIO_Pin << 16u; + 8000a5a: 887b ldrh r3, [r7, #2] + 8000a5c: 041a lsls r2, r3, #16 + 8000a5e: 687b ldr r3, [r7, #4] + 8000a60: 611a str r2, [r3, #16] +} + 8000a62: bf00 nop + 8000a64: 370c adds r7, #12 + 8000a66: 46bd mov sp, r7 + 8000a68: bc80 pop {r7} + 8000a6a: 4770 bx lr + +08000a6c : + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + 8000a6c: b5f0 push {r4, r5, r6, r7, lr} + 8000a6e: b08b sub sp, #44 ; 0x2c + 8000a70: af06 add r7, sp, #24 + 8000a72: 6078 str r0, [r7, #4] + USB_OTG_GlobalTypeDef *USBx; +#endif /* defined (USB_OTG_FS) */ + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + 8000a74: 687b ldr r3, [r7, #4] + 8000a76: 2b00 cmp r3, #0 + 8000a78: d101 bne.n 8000a7e + { + return HAL_ERROR; + 8000a7a: 2301 movs r3, #1 + 8000a7c: e0fd b.n 8000c7a + +#if defined (USB_OTG_FS) + USBx = hpcd->Instance; +#endif /* defined (USB_OTG_FS) */ + + if (hpcd->State == HAL_PCD_STATE_RESET) + 8000a7e: 687b ldr r3, [r7, #4] + 8000a80: f893 32a9 ldrb.w r3, [r3, #681] ; 0x2a9 + 8000a84: b2db uxtb r3, r3 + 8000a86: 2b00 cmp r3, #0 + 8000a88: d106 bne.n 8000a98 + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + 8000a8a: 687b ldr r3, [r7, #4] + 8000a8c: 2200 movs r2, #0 + 8000a8e: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); + 8000a92: 6878 ldr r0, [r7, #4] + 8000a94: f005 fe12 bl 80066bc +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + 8000a98: 687b ldr r3, [r7, #4] + 8000a9a: 2203 movs r2, #3 + 8000a9c: f883 22a9 strb.w r2, [r3, #681] ; 0x2a9 + hpcd->Init.dma_enable = 0U; + } +#endif /* defined (USB_OTG_FS) */ + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + 8000aa0: 687b ldr r3, [r7, #4] + 8000aa2: 681b ldr r3, [r3, #0] + 8000aa4: 4618 mov r0, r3 + 8000aa6: f002 f82b bl 8002b00 + + /*Init the Core (common init.) */ + if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) + 8000aaa: 687b ldr r3, [r7, #4] + 8000aac: 681b ldr r3, [r3, #0] + 8000aae: 603b str r3, [r7, #0] + 8000ab0: 687e ldr r6, [r7, #4] + 8000ab2: 466d mov r5, sp + 8000ab4: f106 0410 add.w r4, r6, #16 + 8000ab8: cc0f ldmia r4!, {r0, r1, r2, r3} + 8000aba: c50f stmia r5!, {r0, r1, r2, r3} + 8000abc: 6823 ldr r3, [r4, #0] + 8000abe: 602b str r3, [r5, #0] + 8000ac0: 1d33 adds r3, r6, #4 + 8000ac2: cb0e ldmia r3, {r1, r2, r3} + 8000ac4: 6838 ldr r0, [r7, #0] + 8000ac6: f001 fff5 bl 8002ab4 + 8000aca: 4603 mov r3, r0 + 8000acc: 2b00 cmp r3, #0 + 8000ace: d005 beq.n 8000adc + { + hpcd->State = HAL_PCD_STATE_ERROR; + 8000ad0: 687b ldr r3, [r7, #4] + 8000ad2: 2202 movs r2, #2 + 8000ad4: f883 22a9 strb.w r2, [r3, #681] ; 0x2a9 + return HAL_ERROR; + 8000ad8: 2301 movs r3, #1 + 8000ada: e0ce b.n 8000c7a + } + + /* Force Device Mode*/ + (void)USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE); + 8000adc: 687b ldr r3, [r7, #4] + 8000ade: 681b ldr r3, [r3, #0] + 8000ae0: 2100 movs r1, #0 + 8000ae2: 4618 mov r0, r3 + 8000ae4: f002 f826 bl 8002b34 + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + 8000ae8: 2300 movs r3, #0 + 8000aea: 73fb strb r3, [r7, #15] + 8000aec: e04c b.n 8000b88 + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + 8000aee: 7bfb ldrb r3, [r7, #15] + 8000af0: 6879 ldr r1, [r7, #4] + 8000af2: 1c5a adds r2, r3, #1 + 8000af4: 4613 mov r3, r2 + 8000af6: 009b lsls r3, r3, #2 + 8000af8: 4413 add r3, r2 + 8000afa: 00db lsls r3, r3, #3 + 8000afc: 440b add r3, r1 + 8000afe: 3301 adds r3, #1 + 8000b00: 2201 movs r2, #1 + 8000b02: 701a strb r2, [r3, #0] + hpcd->IN_ep[i].num = i; + 8000b04: 7bfb ldrb r3, [r7, #15] + 8000b06: 6879 ldr r1, [r7, #4] + 8000b08: 1c5a adds r2, r3, #1 + 8000b0a: 4613 mov r3, r2 + 8000b0c: 009b lsls r3, r3, #2 + 8000b0e: 4413 add r3, r2 + 8000b10: 00db lsls r3, r3, #3 + 8000b12: 440b add r3, r1 + 8000b14: 7bfa ldrb r2, [r7, #15] + 8000b16: 701a strb r2, [r3, #0] + hpcd->IN_ep[i].tx_fifo_num = i; + 8000b18: 7bfa ldrb r2, [r7, #15] + 8000b1a: 7bfb ldrb r3, [r7, #15] + 8000b1c: b298 uxth r0, r3 + 8000b1e: 6879 ldr r1, [r7, #4] + 8000b20: 4613 mov r3, r2 + 8000b22: 009b lsls r3, r3, #2 + 8000b24: 4413 add r3, r2 + 8000b26: 00db lsls r3, r3, #3 + 8000b28: 440b add r3, r1 + 8000b2a: 3336 adds r3, #54 ; 0x36 + 8000b2c: 4602 mov r2, r0 + 8000b2e: 801a strh r2, [r3, #0] + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + 8000b30: 7bfb ldrb r3, [r7, #15] + 8000b32: 6879 ldr r1, [r7, #4] + 8000b34: 1c5a adds r2, r3, #1 + 8000b36: 4613 mov r3, r2 + 8000b38: 009b lsls r3, r3, #2 + 8000b3a: 4413 add r3, r2 + 8000b3c: 00db lsls r3, r3, #3 + 8000b3e: 440b add r3, r1 + 8000b40: 3303 adds r3, #3 + 8000b42: 2200 movs r2, #0 + 8000b44: 701a strb r2, [r3, #0] + hpcd->IN_ep[i].maxpacket = 0U; + 8000b46: 7bfa ldrb r2, [r7, #15] + 8000b48: 6879 ldr r1, [r7, #4] + 8000b4a: 4613 mov r3, r2 + 8000b4c: 009b lsls r3, r3, #2 + 8000b4e: 4413 add r3, r2 + 8000b50: 00db lsls r3, r3, #3 + 8000b52: 440b add r3, r1 + 8000b54: 3338 adds r3, #56 ; 0x38 + 8000b56: 2200 movs r2, #0 + 8000b58: 601a str r2, [r3, #0] + hpcd->IN_ep[i].xfer_buff = 0U; + 8000b5a: 7bfa ldrb r2, [r7, #15] + 8000b5c: 6879 ldr r1, [r7, #4] + 8000b5e: 4613 mov r3, r2 + 8000b60: 009b lsls r3, r3, #2 + 8000b62: 4413 add r3, r2 + 8000b64: 00db lsls r3, r3, #3 + 8000b66: 440b add r3, r1 + 8000b68: 333c adds r3, #60 ; 0x3c + 8000b6a: 2200 movs r2, #0 + 8000b6c: 601a str r2, [r3, #0] + hpcd->IN_ep[i].xfer_len = 0U; + 8000b6e: 7bfa ldrb r2, [r7, #15] + 8000b70: 6879 ldr r1, [r7, #4] + 8000b72: 4613 mov r3, r2 + 8000b74: 009b lsls r3, r3, #2 + 8000b76: 4413 add r3, r2 + 8000b78: 00db lsls r3, r3, #3 + 8000b7a: 440b add r3, r1 + 8000b7c: 3340 adds r3, #64 ; 0x40 + 8000b7e: 2200 movs r2, #0 + 8000b80: 601a str r2, [r3, #0] + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + 8000b82: 7bfb ldrb r3, [r7, #15] + 8000b84: 3301 adds r3, #1 + 8000b86: 73fb strb r3, [r7, #15] + 8000b88: 7bfa ldrb r2, [r7, #15] + 8000b8a: 687b ldr r3, [r7, #4] + 8000b8c: 685b ldr r3, [r3, #4] + 8000b8e: 429a cmp r2, r3 + 8000b90: d3ad bcc.n 8000aee + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + 8000b92: 2300 movs r3, #0 + 8000b94: 73fb strb r3, [r7, #15] + 8000b96: e044 b.n 8000c22 + { + hpcd->OUT_ep[i].is_in = 0U; + 8000b98: 7bfa ldrb r2, [r7, #15] + 8000b9a: 6879 ldr r1, [r7, #4] + 8000b9c: 4613 mov r3, r2 + 8000b9e: 009b lsls r3, r3, #2 + 8000ba0: 4413 add r3, r2 + 8000ba2: 00db lsls r3, r3, #3 + 8000ba4: 440b add r3, r1 + 8000ba6: f203 1369 addw r3, r3, #361 ; 0x169 + 8000baa: 2200 movs r2, #0 + 8000bac: 701a strb r2, [r3, #0] + hpcd->OUT_ep[i].num = i; + 8000bae: 7bfa ldrb r2, [r7, #15] + 8000bb0: 6879 ldr r1, [r7, #4] + 8000bb2: 4613 mov r3, r2 + 8000bb4: 009b lsls r3, r3, #2 + 8000bb6: 4413 add r3, r2 + 8000bb8: 00db lsls r3, r3, #3 + 8000bba: 440b add r3, r1 + 8000bbc: f503 73b4 add.w r3, r3, #360 ; 0x168 + 8000bc0: 7bfa ldrb r2, [r7, #15] + 8000bc2: 701a strb r2, [r3, #0] + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + 8000bc4: 7bfa ldrb r2, [r7, #15] + 8000bc6: 6879 ldr r1, [r7, #4] + 8000bc8: 4613 mov r3, r2 + 8000bca: 009b lsls r3, r3, #2 + 8000bcc: 4413 add r3, r2 + 8000bce: 00db lsls r3, r3, #3 + 8000bd0: 440b add r3, r1 + 8000bd2: f203 136b addw r3, r3, #363 ; 0x16b + 8000bd6: 2200 movs r2, #0 + 8000bd8: 701a strb r2, [r3, #0] + hpcd->OUT_ep[i].maxpacket = 0U; + 8000bda: 7bfa ldrb r2, [r7, #15] + 8000bdc: 6879 ldr r1, [r7, #4] + 8000bde: 4613 mov r3, r2 + 8000be0: 009b lsls r3, r3, #2 + 8000be2: 4413 add r3, r2 + 8000be4: 00db lsls r3, r3, #3 + 8000be6: 440b add r3, r1 + 8000be8: f503 73bc add.w r3, r3, #376 ; 0x178 + 8000bec: 2200 movs r2, #0 + 8000bee: 601a str r2, [r3, #0] + hpcd->OUT_ep[i].xfer_buff = 0U; + 8000bf0: 7bfa ldrb r2, [r7, #15] + 8000bf2: 6879 ldr r1, [r7, #4] + 8000bf4: 4613 mov r3, r2 + 8000bf6: 009b lsls r3, r3, #2 + 8000bf8: 4413 add r3, r2 + 8000bfa: 00db lsls r3, r3, #3 + 8000bfc: 440b add r3, r1 + 8000bfe: f503 73be add.w r3, r3, #380 ; 0x17c + 8000c02: 2200 movs r2, #0 + 8000c04: 601a str r2, [r3, #0] + hpcd->OUT_ep[i].xfer_len = 0U; + 8000c06: 7bfa ldrb r2, [r7, #15] + 8000c08: 6879 ldr r1, [r7, #4] + 8000c0a: 4613 mov r3, r2 + 8000c0c: 009b lsls r3, r3, #2 + 8000c0e: 4413 add r3, r2 + 8000c10: 00db lsls r3, r3, #3 + 8000c12: 440b add r3, r1 + 8000c14: f503 73c0 add.w r3, r3, #384 ; 0x180 + 8000c18: 2200 movs r2, #0 + 8000c1a: 601a str r2, [r3, #0] + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + 8000c1c: 7bfb ldrb r3, [r7, #15] + 8000c1e: 3301 adds r3, #1 + 8000c20: 73fb strb r3, [r7, #15] + 8000c22: 7bfa ldrb r2, [r7, #15] + 8000c24: 687b ldr r3, [r7, #4] + 8000c26: 685b ldr r3, [r3, #4] + 8000c28: 429a cmp r2, r3 + 8000c2a: d3b5 bcc.n 8000b98 + } + + /* Init Device */ + if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) + 8000c2c: 687b ldr r3, [r7, #4] + 8000c2e: 681b ldr r3, [r3, #0] + 8000c30: 603b str r3, [r7, #0] + 8000c32: 687e ldr r6, [r7, #4] + 8000c34: 466d mov r5, sp + 8000c36: f106 0410 add.w r4, r6, #16 + 8000c3a: cc0f ldmia r4!, {r0, r1, r2, r3} + 8000c3c: c50f stmia r5!, {r0, r1, r2, r3} + 8000c3e: 6823 ldr r3, [r4, #0] + 8000c40: 602b str r3, [r5, #0] + 8000c42: 1d33 adds r3, r6, #4 + 8000c44: cb0e ldmia r3, {r1, r2, r3} + 8000c46: 6838 ldr r0, [r7, #0] + 8000c48: f001 ff80 bl 8002b4c + 8000c4c: 4603 mov r3, r0 + 8000c4e: 2b00 cmp r3, #0 + 8000c50: d005 beq.n 8000c5e + { + hpcd->State = HAL_PCD_STATE_ERROR; + 8000c52: 687b ldr r3, [r7, #4] + 8000c54: 2202 movs r2, #2 + 8000c56: f883 22a9 strb.w r2, [r3, #681] ; 0x2a9 + return HAL_ERROR; + 8000c5a: 2301 movs r3, #1 + 8000c5c: e00d b.n 8000c7a + } + + hpcd->USB_Address = 0U; + 8000c5e: 687b ldr r3, [r7, #4] + 8000c60: 2200 movs r2, #0 + 8000c62: f883 2024 strb.w r2, [r3, #36] ; 0x24 + hpcd->State = HAL_PCD_STATE_READY; + 8000c66: 687b ldr r3, [r7, #4] + 8000c68: 2201 movs r2, #1 + 8000c6a: f883 22a9 strb.w r2, [r3, #681] ; 0x2a9 + (void)USB_DevDisconnect(hpcd->Instance); + 8000c6e: 687b ldr r3, [r7, #4] + 8000c70: 681b ldr r3, [r3, #0] + 8000c72: 4618 mov r0, r3 + 8000c74: f003 ff1a bl 8004aac + + return HAL_OK; + 8000c78: 2300 movs r3, #0 +} + 8000c7a: 4618 mov r0, r3 + 8000c7c: 3714 adds r7, #20 + 8000c7e: 46bd mov sp, r7 + 8000c80: bdf0 pop {r4, r5, r6, r7, pc} + +08000c82 : + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + 8000c82: b580 push {r7, lr} + 8000c84: b082 sub sp, #8 + 8000c86: af00 add r7, sp, #0 + 8000c88: 6078 str r0, [r7, #4] + __HAL_LOCK(hpcd); + 8000c8a: 687b ldr r3, [r7, #4] + 8000c8c: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 8000c90: 2b01 cmp r3, #1 + 8000c92: d101 bne.n 8000c98 + 8000c94: 2302 movs r3, #2 + 8000c96: e016 b.n 8000cc6 + 8000c98: 687b ldr r3, [r7, #4] + 8000c9a: 2201 movs r2, #1 + 8000c9c: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + __HAL_PCD_ENABLE(hpcd); + 8000ca0: 687b ldr r3, [r7, #4] + 8000ca2: 681b ldr r3, [r3, #0] + 8000ca4: 4618 mov r0, r3 + 8000ca6: f001 ff15 bl 8002ad4 + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 1U); + 8000caa: 2101 movs r1, #1 + 8000cac: 6878 ldr r0, [r7, #4] + 8000cae: f005 ff80 bl 8006bb2 +#endif /* defined (USB) */ + + (void)USB_DevConnect(hpcd->Instance); + 8000cb2: 687b ldr r3, [r7, #4] + 8000cb4: 681b ldr r3, [r3, #0] + 8000cb6: 4618 mov r0, r3 + 8000cb8: f003 feee bl 8004a98 + __HAL_UNLOCK(hpcd); + 8000cbc: 687b ldr r3, [r7, #4] + 8000cbe: 2200 movs r2, #0 + 8000cc0: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + + return HAL_OK; + 8000cc4: 2300 movs r3, #0 +} + 8000cc6: 4618 mov r0, r3 + 8000cc8: 3708 adds r7, #8 + 8000cca: 46bd mov sp, r7 + 8000ccc: bd80 pop {r7, pc} + +08000cce : + * @brief This function handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + 8000cce: b580 push {r7, lr} + 8000cd0: b088 sub sp, #32 + 8000cd2: af00 add r7, sp, #0 + 8000cd4: 6078 str r0, [r7, #4] + uint16_t store_ep[8]; + uint8_t i; + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) + 8000cd6: 687b ldr r3, [r7, #4] + 8000cd8: 681b ldr r3, [r3, #0] + 8000cda: 4618 mov r0, r3 + 8000cdc: f003 fef0 bl 8004ac0 + 8000ce0: 4603 mov r3, r0 + 8000ce2: f403 4300 and.w r3, r3, #32768 ; 0x8000 + 8000ce6: f5b3 4f00 cmp.w r3, #32768 ; 0x8000 + 8000cea: d102 bne.n 8000cf2 + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + (void)PCD_EP_ISR_Handler(hpcd); + 8000cec: 6878 ldr r0, [r7, #4] + 8000cee: f000 fb61 bl 80013b4 + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) + 8000cf2: 687b ldr r3, [r7, #4] + 8000cf4: 681b ldr r3, [r3, #0] + 8000cf6: 4618 mov r0, r3 + 8000cf8: f003 fee2 bl 8004ac0 + 8000cfc: 4603 mov r3, r0 + 8000cfe: f403 6380 and.w r3, r3, #1024 ; 0x400 + 8000d02: f5b3 6f80 cmp.w r3, #1024 ; 0x400 + 8000d06: d112 bne.n 8000d2e + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + 8000d08: 687b ldr r3, [r7, #4] + 8000d0a: 681b ldr r3, [r3, #0] + 8000d0c: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000d10: b29a uxth r2, r3 + 8000d12: 687b ldr r3, [r7, #4] + 8000d14: 681b ldr r3, [r3, #0] + 8000d16: f422 6280 bic.w r2, r2, #1024 ; 0x400 + 8000d1a: b292 uxth r2, r2 + 8000d1c: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); + 8000d20: 6878 ldr r0, [r7, #4] + 8000d22: f005 fd4e bl 80067c2 +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + (void)HAL_PCD_SetAddress(hpcd, 0U); + 8000d26: 2100 movs r1, #0 + 8000d28: 6878 ldr r0, [r7, #4] + 8000d2a: f000 f925 bl 8000f78 + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) + 8000d2e: 687b ldr r3, [r7, #4] + 8000d30: 681b ldr r3, [r3, #0] + 8000d32: 4618 mov r0, r3 + 8000d34: f003 fec4 bl 8004ac0 + 8000d38: 4603 mov r3, r0 + 8000d3a: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 8000d3e: f5b3 4f80 cmp.w r3, #16384 ; 0x4000 + 8000d42: d10b bne.n 8000d5c + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + 8000d44: 687b ldr r3, [r7, #4] + 8000d46: 681b ldr r3, [r3, #0] + 8000d48: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000d4c: b29a uxth r2, r3 + 8000d4e: 687b ldr r3, [r7, #4] + 8000d50: 681b ldr r3, [r3, #0] + 8000d52: f422 4280 bic.w r2, r2, #16384 ; 0x4000 + 8000d56: b292 uxth r2, r2 + 8000d58: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) + 8000d5c: 687b ldr r3, [r7, #4] + 8000d5e: 681b ldr r3, [r3, #0] + 8000d60: 4618 mov r0, r3 + 8000d62: f003 fead bl 8004ac0 + 8000d66: 4603 mov r3, r0 + 8000d68: f403 5300 and.w r3, r3, #8192 ; 0x2000 + 8000d6c: f5b3 5f00 cmp.w r3, #8192 ; 0x2000 + 8000d70: d10b bne.n 8000d8a + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + 8000d72: 687b ldr r3, [r7, #4] + 8000d74: 681b ldr r3, [r3, #0] + 8000d76: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000d7a: b29a uxth r2, r3 + 8000d7c: 687b ldr r3, [r7, #4] + 8000d7e: 681b ldr r3, [r3, #0] + 8000d80: f422 5200 bic.w r2, r2, #8192 ; 0x2000 + 8000d84: b292 uxth r2, r2 + 8000d86: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) + 8000d8a: 687b ldr r3, [r7, #4] + 8000d8c: 681b ldr r3, [r3, #0] + 8000d8e: 4618 mov r0, r3 + 8000d90: f003 fe96 bl 8004ac0 + 8000d94: 4603 mov r3, r0 + 8000d96: f403 5380 and.w r3, r3, #4096 ; 0x1000 + 8000d9a: f5b3 5f80 cmp.w r3, #4096 ; 0x1000 + 8000d9e: d126 bne.n 8000dee + { + hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_LP_MODE); + 8000da0: 687b ldr r3, [r7, #4] + 8000da2: 681b ldr r3, [r3, #0] + 8000da4: f8b3 3040 ldrh.w r3, [r3, #64] ; 0x40 + 8000da8: b29a uxth r2, r3 + 8000daa: 687b ldr r3, [r7, #4] + 8000dac: 681b ldr r3, [r3, #0] + 8000dae: f022 0204 bic.w r2, r2, #4 + 8000db2: b292 uxth r2, r2 + 8000db4: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_FSUSP); + 8000db8: 687b ldr r3, [r7, #4] + 8000dba: 681b ldr r3, [r3, #0] + 8000dbc: f8b3 3040 ldrh.w r3, [r3, #64] ; 0x40 + 8000dc0: b29a uxth r2, r3 + 8000dc2: 687b ldr r3, [r7, #4] + 8000dc4: 681b ldr r3, [r3, #0] + 8000dc6: f022 0208 bic.w r2, r2, #8 + 8000dca: b292 uxth r2, r2 + 8000dcc: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); + 8000dd0: 6878 ldr r0, [r7, #4] + 8000dd2: f005 fd2f bl 8006834 +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + 8000dd6: 687b ldr r3, [r7, #4] + 8000dd8: 681b ldr r3, [r3, #0] + 8000dda: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000dde: b29a uxth r2, r3 + 8000de0: 687b ldr r3, [r7, #4] + 8000de2: 681b ldr r3, [r3, #0] + 8000de4: f422 5280 bic.w r2, r2, #4096 ; 0x1000 + 8000de8: b292 uxth r2, r2 + 8000dea: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) + 8000dee: 687b ldr r3, [r7, #4] + 8000df0: 681b ldr r3, [r3, #0] + 8000df2: 4618 mov r0, r3 + 8000df4: f003 fe64 bl 8004ac0 + 8000df8: 4603 mov r3, r0 + 8000dfa: f403 6300 and.w r3, r3, #2048 ; 0x800 + 8000dfe: f5b3 6f00 cmp.w r3, #2048 ; 0x800 + 8000e02: f040 8084 bne.w 8000f0e + { + /* WA: To Clear Wakeup flag if raised with suspend signal */ + + /* Store Endpoint register */ + for (i = 0U; i < 8U; i++) + 8000e06: 2300 movs r3, #0 + 8000e08: 77fb strb r3, [r7, #31] + 8000e0a: e011 b.n 8000e30 + { + store_ep[i] = PCD_GET_ENDPOINT(hpcd->Instance, i); + 8000e0c: 687b ldr r3, [r7, #4] + 8000e0e: 681b ldr r3, [r3, #0] + 8000e10: 461a mov r2, r3 + 8000e12: 7ffb ldrb r3, [r7, #31] + 8000e14: 009b lsls r3, r3, #2 + 8000e16: 441a add r2, r3 + 8000e18: 7ffb ldrb r3, [r7, #31] + 8000e1a: 8812 ldrh r2, [r2, #0] + 8000e1c: b292 uxth r2, r2 + 8000e1e: 005b lsls r3, r3, #1 + 8000e20: f107 0120 add.w r1, r7, #32 + 8000e24: 440b add r3, r1 + 8000e26: f823 2c14 strh.w r2, [r3, #-20] + for (i = 0U; i < 8U; i++) + 8000e2a: 7ffb ldrb r3, [r7, #31] + 8000e2c: 3301 adds r3, #1 + 8000e2e: 77fb strb r3, [r7, #31] + 8000e30: 7ffb ldrb r3, [r7, #31] + 8000e32: 2b07 cmp r3, #7 + 8000e34: d9ea bls.n 8000e0c + } + + /* FORCE RESET */ + hpcd->Instance->CNTR |= (uint16_t)(USB_CNTR_FRES); + 8000e36: 687b ldr r3, [r7, #4] + 8000e38: 681b ldr r3, [r3, #0] + 8000e3a: f8b3 3040 ldrh.w r3, [r3, #64] ; 0x40 + 8000e3e: b29a uxth r2, r3 + 8000e40: 687b ldr r3, [r7, #4] + 8000e42: 681b ldr r3, [r3, #0] + 8000e44: f042 0201 orr.w r2, r2, #1 + 8000e48: b292 uxth r2, r2 + 8000e4a: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + + /* CLEAR RESET */ + hpcd->Instance->CNTR &= (uint16_t)(~USB_CNTR_FRES); + 8000e4e: 687b ldr r3, [r7, #4] + 8000e50: 681b ldr r3, [r3, #0] + 8000e52: f8b3 3040 ldrh.w r3, [r3, #64] ; 0x40 + 8000e56: b29a uxth r2, r3 + 8000e58: 687b ldr r3, [r7, #4] + 8000e5a: 681b ldr r3, [r3, #0] + 8000e5c: f022 0201 bic.w r2, r2, #1 + 8000e60: b292 uxth r2, r2 + 8000e62: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + + /* wait for reset flag in ISTR */ + while ((hpcd->Instance->ISTR & USB_ISTR_RESET) == 0U) + 8000e66: bf00 nop + 8000e68: 687b ldr r3, [r7, #4] + 8000e6a: 681b ldr r3, [r3, #0] + 8000e6c: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000e70: b29b uxth r3, r3 + 8000e72: f403 6380 and.w r3, r3, #1024 ; 0x400 + 8000e76: 2b00 cmp r3, #0 + 8000e78: d0f6 beq.n 8000e68 + { + } + + /* Clear Reset Flag */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + 8000e7a: 687b ldr r3, [r7, #4] + 8000e7c: 681b ldr r3, [r3, #0] + 8000e7e: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000e82: b29a uxth r2, r3 + 8000e84: 687b ldr r3, [r7, #4] + 8000e86: 681b ldr r3, [r3, #0] + 8000e88: f422 6280 bic.w r2, r2, #1024 ; 0x400 + 8000e8c: b292 uxth r2, r2 + 8000e8e: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + + /* Restore Registre */ + for (i = 0U; i < 8U; i++) + 8000e92: 2300 movs r3, #0 + 8000e94: 77fb strb r3, [r7, #31] + 8000e96: e010 b.n 8000eba + { + PCD_SET_ENDPOINT(hpcd->Instance, i, store_ep[i]); + 8000e98: 7ffb ldrb r3, [r7, #31] + 8000e9a: 687a ldr r2, [r7, #4] + 8000e9c: 6812 ldr r2, [r2, #0] + 8000e9e: 4611 mov r1, r2 + 8000ea0: 7ffa ldrb r2, [r7, #31] + 8000ea2: 0092 lsls r2, r2, #2 + 8000ea4: 440a add r2, r1 + 8000ea6: 005b lsls r3, r3, #1 + 8000ea8: f107 0120 add.w r1, r7, #32 + 8000eac: 440b add r3, r1 + 8000eae: f833 3c14 ldrh.w r3, [r3, #-20] + 8000eb2: 8013 strh r3, [r2, #0] + for (i = 0U; i < 8U; i++) + 8000eb4: 7ffb ldrb r3, [r7, #31] + 8000eb6: 3301 adds r3, #1 + 8000eb8: 77fb strb r3, [r7, #31] + 8000eba: 7ffb ldrb r3, [r7, #31] + 8000ebc: 2b07 cmp r3, #7 + 8000ebe: d9eb bls.n 8000e98 + } + + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_FSUSP; + 8000ec0: 687b ldr r3, [r7, #4] + 8000ec2: 681b ldr r3, [r3, #0] + 8000ec4: f8b3 3040 ldrh.w r3, [r3, #64] ; 0x40 + 8000ec8: b29a uxth r2, r3 + 8000eca: 687b ldr r3, [r7, #4] + 8000ecc: 681b ldr r3, [r3, #0] + 8000ece: f042 0208 orr.w r2, r2, #8 + 8000ed2: b292 uxth r2, r2 + 8000ed4: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + 8000ed8: 687b ldr r3, [r7, #4] + 8000eda: 681b ldr r3, [r3, #0] + 8000edc: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000ee0: b29a uxth r2, r3 + 8000ee2: 687b ldr r3, [r7, #4] + 8000ee4: 681b ldr r3, [r3, #0] + 8000ee6: f422 6200 bic.w r2, r2, #2048 ; 0x800 + 8000eea: b292 uxth r2, r2 + 8000eec: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + + hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_LP_MODE; + 8000ef0: 687b ldr r3, [r7, #4] + 8000ef2: 681b ldr r3, [r3, #0] + 8000ef4: f8b3 3040 ldrh.w r3, [r3, #64] ; 0x40 + 8000ef8: b29a uxth r2, r3 + 8000efa: 687b ldr r3, [r7, #4] + 8000efc: 681b ldr r3, [r3, #0] + 8000efe: f042 0204 orr.w r2, r2, #4 + 8000f02: b292 uxth r2, r2 + 8000f04: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); + 8000f08: 6878 ldr r0, [r7, #4] + 8000f0a: f005 fc79 bl 8006800 +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) + 8000f0e: 687b ldr r3, [r7, #4] + 8000f10: 681b ldr r3, [r3, #0] + 8000f12: 4618 mov r0, r3 + 8000f14: f003 fdd4 bl 8004ac0 + 8000f18: 4603 mov r3, r0 + 8000f1a: f403 7300 and.w r3, r3, #512 ; 0x200 + 8000f1e: f5b3 7f00 cmp.w r3, #512 ; 0x200 + 8000f22: d10e bne.n 8000f42 + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + 8000f24: 687b ldr r3, [r7, #4] + 8000f26: 681b ldr r3, [r3, #0] + 8000f28: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000f2c: b29a uxth r2, r3 + 8000f2e: 687b ldr r3, [r7, #4] + 8000f30: 681b ldr r3, [r3, #0] + 8000f32: f422 7200 bic.w r2, r2, #512 ; 0x200 + 8000f36: b292 uxth r2, r2 + 8000f38: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); + 8000f3c: 6878 ldr r0, [r7, #4] + 8000f3e: f005 fc32 bl 80067a6 +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) + 8000f42: 687b ldr r3, [r7, #4] + 8000f44: 681b ldr r3, [r3, #0] + 8000f46: 4618 mov r0, r3 + 8000f48: f003 fdba bl 8004ac0 + 8000f4c: 4603 mov r3, r0 + 8000f4e: f403 7380 and.w r3, r3, #256 ; 0x100 + 8000f52: f5b3 7f80 cmp.w r3, #256 ; 0x100 + 8000f56: d10b bne.n 8000f70 + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); + 8000f58: 687b ldr r3, [r7, #4] + 8000f5a: 681b ldr r3, [r3, #0] + 8000f5c: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8000f60: b29a uxth r2, r3 + 8000f62: 687b ldr r3, [r7, #4] + 8000f64: 681b ldr r3, [r3, #0] + 8000f66: f422 7280 bic.w r2, r2, #256 ; 0x100 + 8000f6a: b292 uxth r2, r2 + 8000f6c: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + } +} + 8000f70: bf00 nop + 8000f72: 3720 adds r7, #32 + 8000f74: 46bd mov sp, r7 + 8000f76: bd80 pop {r7, pc} + +08000f78 : + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + 8000f78: b580 push {r7, lr} + 8000f7a: b082 sub sp, #8 + 8000f7c: af00 add r7, sp, #0 + 8000f7e: 6078 str r0, [r7, #4] + 8000f80: 460b mov r3, r1 + 8000f82: 70fb strb r3, [r7, #3] + __HAL_LOCK(hpcd); + 8000f84: 687b ldr r3, [r7, #4] + 8000f86: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 8000f8a: 2b01 cmp r3, #1 + 8000f8c: d101 bne.n 8000f92 + 8000f8e: 2302 movs r3, #2 + 8000f90: e013 b.n 8000fba + 8000f92: 687b ldr r3, [r7, #4] + 8000f94: 2201 movs r2, #1 + 8000f96: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + hpcd->USB_Address = address; + 8000f9a: 687b ldr r3, [r7, #4] + 8000f9c: 78fa ldrb r2, [r7, #3] + 8000f9e: f883 2024 strb.w r2, [r3, #36] ; 0x24 + (void)USB_SetDevAddress(hpcd->Instance, address); + 8000fa2: 687b ldr r3, [r7, #4] + 8000fa4: 681b ldr r3, [r3, #0] + 8000fa6: 78fa ldrb r2, [r7, #3] + 8000fa8: 4611 mov r1, r2 + 8000faa: 4618 mov r0, r3 + 8000fac: f003 fd61 bl 8004a72 + __HAL_UNLOCK(hpcd); + 8000fb0: 687b ldr r3, [r7, #4] + 8000fb2: 2200 movs r2, #0 + 8000fb4: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + + return HAL_OK; + 8000fb8: 2300 movs r3, #0 +} + 8000fba: 4618 mov r0, r3 + 8000fbc: 3708 adds r7, #8 + 8000fbe: 46bd mov sp, r7 + 8000fc0: bd80 pop {r7, pc} + +08000fc2 : + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + 8000fc2: b580 push {r7, lr} + 8000fc4: b084 sub sp, #16 + 8000fc6: af00 add r7, sp, #0 + 8000fc8: 6078 str r0, [r7, #4] + 8000fca: 4608 mov r0, r1 + 8000fcc: 4611 mov r1, r2 + 8000fce: 461a mov r2, r3 + 8000fd0: 4603 mov r3, r0 + 8000fd2: 70fb strb r3, [r7, #3] + 8000fd4: 460b mov r3, r1 + 8000fd6: 803b strh r3, [r7, #0] + 8000fd8: 4613 mov r3, r2 + 8000fda: 70bb strb r3, [r7, #2] + HAL_StatusTypeDef ret = HAL_OK; + 8000fdc: 2300 movs r3, #0 + 8000fde: 72fb strb r3, [r7, #11] + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + 8000fe0: f997 3003 ldrsb.w r3, [r7, #3] + 8000fe4: 2b00 cmp r3, #0 + 8000fe6: da0e bge.n 8001006 + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + 8000fe8: 78fb ldrb r3, [r7, #3] + 8000fea: f003 0307 and.w r3, r3, #7 + 8000fee: 1c5a adds r2, r3, #1 + 8000ff0: 4613 mov r3, r2 + 8000ff2: 009b lsls r3, r3, #2 + 8000ff4: 4413 add r3, r2 + 8000ff6: 00db lsls r3, r3, #3 + 8000ff8: 687a ldr r2, [r7, #4] + 8000ffa: 4413 add r3, r2 + 8000ffc: 60fb str r3, [r7, #12] + ep->is_in = 1U; + 8000ffe: 68fb ldr r3, [r7, #12] + 8001000: 2201 movs r2, #1 + 8001002: 705a strb r2, [r3, #1] + 8001004: e00e b.n 8001024 + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + 8001006: 78fb ldrb r3, [r7, #3] + 8001008: f003 0207 and.w r2, r3, #7 + 800100c: 4613 mov r3, r2 + 800100e: 009b lsls r3, r3, #2 + 8001010: 4413 add r3, r2 + 8001012: 00db lsls r3, r3, #3 + 8001014: f503 73b4 add.w r3, r3, #360 ; 0x168 + 8001018: 687a ldr r2, [r7, #4] + 800101a: 4413 add r3, r2 + 800101c: 60fb str r3, [r7, #12] + ep->is_in = 0U; + 800101e: 68fb ldr r3, [r7, #12] + 8001020: 2200 movs r2, #0 + 8001022: 705a strb r2, [r3, #1] + } + + ep->num = ep_addr & EP_ADDR_MSK; + 8001024: 78fb ldrb r3, [r7, #3] + 8001026: f003 0307 and.w r3, r3, #7 + 800102a: b2da uxtb r2, r3 + 800102c: 68fb ldr r3, [r7, #12] + 800102e: 701a strb r2, [r3, #0] + ep->maxpacket = ep_mps; + 8001030: 883a ldrh r2, [r7, #0] + 8001032: 68fb ldr r3, [r7, #12] + 8001034: 611a str r2, [r3, #16] + ep->type = ep_type; + 8001036: 68fb ldr r3, [r7, #12] + 8001038: 78ba ldrb r2, [r7, #2] + 800103a: 70da strb r2, [r3, #3] + + if (ep->is_in != 0U) + 800103c: 68fb ldr r3, [r7, #12] + 800103e: 785b ldrb r3, [r3, #1] + 8001040: 2b00 cmp r3, #0 + 8001042: d004 beq.n 800104e + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + 8001044: 68fb ldr r3, [r7, #12] + 8001046: 781b ldrb r3, [r3, #0] + 8001048: b29a uxth r2, r3 + 800104a: 68fb ldr r3, [r7, #12] + 800104c: 81da strh r2, [r3, #14] + } + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + 800104e: 78bb ldrb r3, [r7, #2] + 8001050: 2b02 cmp r3, #2 + 8001052: d102 bne.n 800105a + { + ep->data_pid_start = 0U; + 8001054: 68fb ldr r3, [r7, #12] + 8001056: 2200 movs r2, #0 + 8001058: 711a strb r2, [r3, #4] + } + + __HAL_LOCK(hpcd); + 800105a: 687b ldr r3, [r7, #4] + 800105c: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 8001060: 2b01 cmp r3, #1 + 8001062: d101 bne.n 8001068 + 8001064: 2302 movs r3, #2 + 8001066: e00e b.n 8001086 + 8001068: 687b ldr r3, [r7, #4] + 800106a: 2201 movs r2, #1 + 800106c: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + 8001070: 687b ldr r3, [r7, #4] + 8001072: 681b ldr r3, [r3, #0] + 8001074: 68f9 ldr r1, [r7, #12] + 8001076: 4618 mov r0, r3 + 8001078: f001 fd88 bl 8002b8c + __HAL_UNLOCK(hpcd); + 800107c: 687b ldr r3, [r7, #4] + 800107e: 2200 movs r2, #0 + 8001080: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + + return ret; + 8001084: 7afb ldrb r3, [r7, #11] +} + 8001086: 4618 mov r0, r3 + 8001088: 3710 adds r7, #16 + 800108a: 46bd mov sp, r7 + 800108c: bd80 pop {r7, pc} + +0800108e : + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + 800108e: b580 push {r7, lr} + 8001090: b084 sub sp, #16 + 8001092: af00 add r7, sp, #0 + 8001094: 6078 str r0, [r7, #4] + 8001096: 460b mov r3, r1 + 8001098: 70fb strb r3, [r7, #3] + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + 800109a: f997 3003 ldrsb.w r3, [r7, #3] + 800109e: 2b00 cmp r3, #0 + 80010a0: da0e bge.n 80010c0 + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + 80010a2: 78fb ldrb r3, [r7, #3] + 80010a4: f003 0307 and.w r3, r3, #7 + 80010a8: 1c5a adds r2, r3, #1 + 80010aa: 4613 mov r3, r2 + 80010ac: 009b lsls r3, r3, #2 + 80010ae: 4413 add r3, r2 + 80010b0: 00db lsls r3, r3, #3 + 80010b2: 687a ldr r2, [r7, #4] + 80010b4: 4413 add r3, r2 + 80010b6: 60fb str r3, [r7, #12] + ep->is_in = 1U; + 80010b8: 68fb ldr r3, [r7, #12] + 80010ba: 2201 movs r2, #1 + 80010bc: 705a strb r2, [r3, #1] + 80010be: e00e b.n 80010de + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + 80010c0: 78fb ldrb r3, [r7, #3] + 80010c2: f003 0207 and.w r2, r3, #7 + 80010c6: 4613 mov r3, r2 + 80010c8: 009b lsls r3, r3, #2 + 80010ca: 4413 add r3, r2 + 80010cc: 00db lsls r3, r3, #3 + 80010ce: f503 73b4 add.w r3, r3, #360 ; 0x168 + 80010d2: 687a ldr r2, [r7, #4] + 80010d4: 4413 add r3, r2 + 80010d6: 60fb str r3, [r7, #12] + ep->is_in = 0U; + 80010d8: 68fb ldr r3, [r7, #12] + 80010da: 2200 movs r2, #0 + 80010dc: 705a strb r2, [r3, #1] + } + ep->num = ep_addr & EP_ADDR_MSK; + 80010de: 78fb ldrb r3, [r7, #3] + 80010e0: f003 0307 and.w r3, r3, #7 + 80010e4: b2da uxtb r2, r3 + 80010e6: 68fb ldr r3, [r7, #12] + 80010e8: 701a strb r2, [r3, #0] + + __HAL_LOCK(hpcd); + 80010ea: 687b ldr r3, [r7, #4] + 80010ec: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 80010f0: 2b01 cmp r3, #1 + 80010f2: d101 bne.n 80010f8 + 80010f4: 2302 movs r3, #2 + 80010f6: e00e b.n 8001116 + 80010f8: 687b ldr r3, [r7, #4] + 80010fa: 2201 movs r2, #1 + 80010fc: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + 8001100: 687b ldr r3, [r7, #4] + 8001102: 681b ldr r3, [r3, #0] + 8001104: 68f9 ldr r1, [r7, #12] + 8001106: 4618 mov r0, r3 + 8001108: f002 f8aa bl 8003260 + __HAL_UNLOCK(hpcd); + 800110c: 687b ldr r3, [r7, #4] + 800110e: 2200 movs r2, #0 + 8001110: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + return HAL_OK; + 8001114: 2300 movs r3, #0 +} + 8001116: 4618 mov r0, r3 + 8001118: 3710 adds r7, #16 + 800111a: 46bd mov sp, r7 + 800111c: bd80 pop {r7, pc} + +0800111e : + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + 800111e: b580 push {r7, lr} + 8001120: b086 sub sp, #24 + 8001122: af00 add r7, sp, #0 + 8001124: 60f8 str r0, [r7, #12] + 8001126: 607a str r2, [r7, #4] + 8001128: 603b str r3, [r7, #0] + 800112a: 460b mov r3, r1 + 800112c: 72fb strb r3, [r7, #11] + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + 800112e: 7afb ldrb r3, [r7, #11] + 8001130: f003 0207 and.w r2, r3, #7 + 8001134: 4613 mov r3, r2 + 8001136: 009b lsls r3, r3, #2 + 8001138: 4413 add r3, r2 + 800113a: 00db lsls r3, r3, #3 + 800113c: f503 73b4 add.w r3, r3, #360 ; 0x168 + 8001140: 68fa ldr r2, [r7, #12] + 8001142: 4413 add r3, r2 + 8001144: 617b str r3, [r7, #20] + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + 8001146: 697b ldr r3, [r7, #20] + 8001148: 687a ldr r2, [r7, #4] + 800114a: 615a str r2, [r3, #20] + ep->xfer_len = len; + 800114c: 697b ldr r3, [r7, #20] + 800114e: 683a ldr r2, [r7, #0] + 8001150: 619a str r2, [r3, #24] + ep->xfer_count = 0U; + 8001152: 697b ldr r3, [r7, #20] + 8001154: 2200 movs r2, #0 + 8001156: 61da str r2, [r3, #28] + ep->is_in = 0U; + 8001158: 697b ldr r3, [r7, #20] + 800115a: 2200 movs r2, #0 + 800115c: 705a strb r2, [r3, #1] + ep->num = ep_addr & EP_ADDR_MSK; + 800115e: 7afb ldrb r3, [r7, #11] + 8001160: f003 0307 and.w r3, r3, #7 + 8001164: b2da uxtb r2, r3 + 8001166: 697b ldr r3, [r7, #20] + 8001168: 701a strb r2, [r3, #0] + + if ((ep_addr & EP_ADDR_MSK) == 0U) + 800116a: 7afb ldrb r3, [r7, #11] + 800116c: f003 0307 and.w r3, r3, #7 + 8001170: 2b00 cmp r3, #0 + 8001172: d106 bne.n 8001182 + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + 8001174: 68fb ldr r3, [r7, #12] + 8001176: 681b ldr r3, [r3, #0] + 8001178: 6979 ldr r1, [r7, #20] + 800117a: 4618 mov r0, r3 + 800117c: f002 fa5c bl 8003638 + 8001180: e005 b.n 800118e + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + 8001182: 68fb ldr r3, [r7, #12] + 8001184: 681b ldr r3, [r3, #0] + 8001186: 6979 ldr r1, [r7, #20] + 8001188: 4618 mov r0, r3 + 800118a: f002 fa55 bl 8003638 + } + + return HAL_OK; + 800118e: 2300 movs r3, #0 +} + 8001190: 4618 mov r0, r3 + 8001192: 3718 adds r7, #24 + 8001194: 46bd mov sp, r7 + 8001196: bd80 pop {r7, pc} + +08001198 : + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + 8001198: b480 push {r7} + 800119a: b083 sub sp, #12 + 800119c: af00 add r7, sp, #0 + 800119e: 6078 str r0, [r7, #4] + 80011a0: 460b mov r3, r1 + 80011a2: 70fb strb r3, [r7, #3] + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; + 80011a4: 78fb ldrb r3, [r7, #3] + 80011a6: f003 0207 and.w r2, r3, #7 + 80011aa: 6879 ldr r1, [r7, #4] + 80011ac: 4613 mov r3, r2 + 80011ae: 009b lsls r3, r3, #2 + 80011b0: 4413 add r3, r2 + 80011b2: 00db lsls r3, r3, #3 + 80011b4: 440b add r3, r1 + 80011b6: f503 73c2 add.w r3, r3, #388 ; 0x184 + 80011ba: 681b ldr r3, [r3, #0] +} + 80011bc: 4618 mov r0, r3 + 80011be: 370c adds r7, #12 + 80011c0: 46bd mov sp, r7 + 80011c2: bc80 pop {r7} + 80011c4: 4770 bx lr + +080011c6 : + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + 80011c6: b580 push {r7, lr} + 80011c8: b086 sub sp, #24 + 80011ca: af00 add r7, sp, #0 + 80011cc: 60f8 str r0, [r7, #12] + 80011ce: 607a str r2, [r7, #4] + 80011d0: 603b str r3, [r7, #0] + 80011d2: 460b mov r3, r1 + 80011d4: 72fb strb r3, [r7, #11] + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + 80011d6: 7afb ldrb r3, [r7, #11] + 80011d8: f003 0307 and.w r3, r3, #7 + 80011dc: 1c5a adds r2, r3, #1 + 80011de: 4613 mov r3, r2 + 80011e0: 009b lsls r3, r3, #2 + 80011e2: 4413 add r3, r2 + 80011e4: 00db lsls r3, r3, #3 + 80011e6: 68fa ldr r2, [r7, #12] + 80011e8: 4413 add r3, r2 + 80011ea: 617b str r3, [r7, #20] + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + 80011ec: 697b ldr r3, [r7, #20] + 80011ee: 687a ldr r2, [r7, #4] + 80011f0: 615a str r2, [r3, #20] + ep->xfer_len = len; + 80011f2: 697b ldr r3, [r7, #20] + 80011f4: 683a ldr r2, [r7, #0] + 80011f6: 619a str r2, [r3, #24] +#if defined (USB) + ep->xfer_fill_db = 1U; + 80011f8: 697b ldr r3, [r7, #20] + 80011fa: 2201 movs r2, #1 + 80011fc: f883 2024 strb.w r2, [r3, #36] ; 0x24 + ep->xfer_len_db = len; + 8001200: 697b ldr r3, [r7, #20] + 8001202: 683a ldr r2, [r7, #0] + 8001204: 621a str r2, [r3, #32] +#endif /* defined (USB) */ + ep->xfer_count = 0U; + 8001206: 697b ldr r3, [r7, #20] + 8001208: 2200 movs r2, #0 + 800120a: 61da str r2, [r3, #28] + ep->is_in = 1U; + 800120c: 697b ldr r3, [r7, #20] + 800120e: 2201 movs r2, #1 + 8001210: 705a strb r2, [r3, #1] + ep->num = ep_addr & EP_ADDR_MSK; + 8001212: 7afb ldrb r3, [r7, #11] + 8001214: f003 0307 and.w r3, r3, #7 + 8001218: b2da uxtb r2, r3 + 800121a: 697b ldr r3, [r7, #20] + 800121c: 701a strb r2, [r3, #0] + + if ((ep_addr & EP_ADDR_MSK) == 0U) + 800121e: 7afb ldrb r3, [r7, #11] + 8001220: f003 0307 and.w r3, r3, #7 + 8001224: 2b00 cmp r3, #0 + 8001226: d106 bne.n 8001236 + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + 8001228: 68fb ldr r3, [r7, #12] + 800122a: 681b ldr r3, [r3, #0] + 800122c: 6979 ldr r1, [r7, #20] + 800122e: 4618 mov r0, r3 + 8001230: f002 fa02 bl 8003638 + 8001234: e005 b.n 8001242 + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + 8001236: 68fb ldr r3, [r7, #12] + 8001238: 681b ldr r3, [r3, #0] + 800123a: 6979 ldr r1, [r7, #20] + 800123c: 4618 mov r0, r3 + 800123e: f002 f9fb bl 8003638 + } + + return HAL_OK; + 8001242: 2300 movs r3, #0 +} + 8001244: 4618 mov r0, r3 + 8001246: 3718 adds r7, #24 + 8001248: 46bd mov sp, r7 + 800124a: bd80 pop {r7, pc} + +0800124c : + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + 800124c: b580 push {r7, lr} + 800124e: b084 sub sp, #16 + 8001250: af00 add r7, sp, #0 + 8001252: 6078 str r0, [r7, #4] + 8001254: 460b mov r3, r1 + 8001256: 70fb strb r3, [r7, #3] + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + 8001258: 78fb ldrb r3, [r7, #3] + 800125a: f003 0207 and.w r2, r3, #7 + 800125e: 687b ldr r3, [r7, #4] + 8001260: 685b ldr r3, [r3, #4] + 8001262: 429a cmp r2, r3 + 8001264: d901 bls.n 800126a + { + return HAL_ERROR; + 8001266: 2301 movs r3, #1 + 8001268: e04c b.n 8001304 + } + + if ((0x80U & ep_addr) == 0x80U) + 800126a: f997 3003 ldrsb.w r3, [r7, #3] + 800126e: 2b00 cmp r3, #0 + 8001270: da0e bge.n 8001290 + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + 8001272: 78fb ldrb r3, [r7, #3] + 8001274: f003 0307 and.w r3, r3, #7 + 8001278: 1c5a adds r2, r3, #1 + 800127a: 4613 mov r3, r2 + 800127c: 009b lsls r3, r3, #2 + 800127e: 4413 add r3, r2 + 8001280: 00db lsls r3, r3, #3 + 8001282: 687a ldr r2, [r7, #4] + 8001284: 4413 add r3, r2 + 8001286: 60fb str r3, [r7, #12] + ep->is_in = 1U; + 8001288: 68fb ldr r3, [r7, #12] + 800128a: 2201 movs r2, #1 + 800128c: 705a strb r2, [r3, #1] + 800128e: e00c b.n 80012aa + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + 8001290: 78fa ldrb r2, [r7, #3] + 8001292: 4613 mov r3, r2 + 8001294: 009b lsls r3, r3, #2 + 8001296: 4413 add r3, r2 + 8001298: 00db lsls r3, r3, #3 + 800129a: f503 73b4 add.w r3, r3, #360 ; 0x168 + 800129e: 687a ldr r2, [r7, #4] + 80012a0: 4413 add r3, r2 + 80012a2: 60fb str r3, [r7, #12] + ep->is_in = 0U; + 80012a4: 68fb ldr r3, [r7, #12] + 80012a6: 2200 movs r2, #0 + 80012a8: 705a strb r2, [r3, #1] + } + + ep->is_stall = 1U; + 80012aa: 68fb ldr r3, [r7, #12] + 80012ac: 2201 movs r2, #1 + 80012ae: 709a strb r2, [r3, #2] + ep->num = ep_addr & EP_ADDR_MSK; + 80012b0: 78fb ldrb r3, [r7, #3] + 80012b2: f003 0307 and.w r3, r3, #7 + 80012b6: b2da uxtb r2, r3 + 80012b8: 68fb ldr r3, [r7, #12] + 80012ba: 701a strb r2, [r3, #0] + + __HAL_LOCK(hpcd); + 80012bc: 687b ldr r3, [r7, #4] + 80012be: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 80012c2: 2b01 cmp r3, #1 + 80012c4: d101 bne.n 80012ca + 80012c6: 2302 movs r3, #2 + 80012c8: e01c b.n 8001304 + 80012ca: 687b ldr r3, [r7, #4] + 80012cc: 2201 movs r2, #1 + 80012ce: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + + (void)USB_EPSetStall(hpcd->Instance, ep); + 80012d2: 687b ldr r3, [r7, #4] + 80012d4: 681b ldr r3, [r3, #0] + 80012d6: 68f9 ldr r1, [r7, #12] + 80012d8: 4618 mov r0, r3 + 80012da: f003 facd bl 8004878 + + if ((ep_addr & EP_ADDR_MSK) == 0U) + 80012de: 78fb ldrb r3, [r7, #3] + 80012e0: f003 0307 and.w r3, r3, #7 + 80012e4: 2b00 cmp r3, #0 + 80012e6: d108 bne.n 80012fa + { + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); + 80012e8: 687b ldr r3, [r7, #4] + 80012ea: 681a ldr r2, [r3, #0] + 80012ec: 687b ldr r3, [r7, #4] + 80012ee: f503 732c add.w r3, r3, #688 ; 0x2b0 + 80012f2: 4619 mov r1, r3 + 80012f4: 4610 mov r0, r2 + 80012f6: f003 fbf2 bl 8004ade + } + + __HAL_UNLOCK(hpcd); + 80012fa: 687b ldr r3, [r7, #4] + 80012fc: 2200 movs r2, #0 + 80012fe: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + + return HAL_OK; + 8001302: 2300 movs r3, #0 +} + 8001304: 4618 mov r0, r3 + 8001306: 3710 adds r7, #16 + 8001308: 46bd mov sp, r7 + 800130a: bd80 pop {r7, pc} + +0800130c : + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + 800130c: b580 push {r7, lr} + 800130e: b084 sub sp, #16 + 8001310: af00 add r7, sp, #0 + 8001312: 6078 str r0, [r7, #4] + 8001314: 460b mov r3, r1 + 8001316: 70fb strb r3, [r7, #3] + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + 8001318: 78fb ldrb r3, [r7, #3] + 800131a: f003 020f and.w r2, r3, #15 + 800131e: 687b ldr r3, [r7, #4] + 8001320: 685b ldr r3, [r3, #4] + 8001322: 429a cmp r2, r3 + 8001324: d901 bls.n 800132a + { + return HAL_ERROR; + 8001326: 2301 movs r3, #1 + 8001328: e040 b.n 80013ac + } + + if ((0x80U & ep_addr) == 0x80U) + 800132a: f997 3003 ldrsb.w r3, [r7, #3] + 800132e: 2b00 cmp r3, #0 + 8001330: da0e bge.n 8001350 + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + 8001332: 78fb ldrb r3, [r7, #3] + 8001334: f003 0307 and.w r3, r3, #7 + 8001338: 1c5a adds r2, r3, #1 + 800133a: 4613 mov r3, r2 + 800133c: 009b lsls r3, r3, #2 + 800133e: 4413 add r3, r2 + 8001340: 00db lsls r3, r3, #3 + 8001342: 687a ldr r2, [r7, #4] + 8001344: 4413 add r3, r2 + 8001346: 60fb str r3, [r7, #12] + ep->is_in = 1U; + 8001348: 68fb ldr r3, [r7, #12] + 800134a: 2201 movs r2, #1 + 800134c: 705a strb r2, [r3, #1] + 800134e: e00e b.n 800136e + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + 8001350: 78fb ldrb r3, [r7, #3] + 8001352: f003 0207 and.w r2, r3, #7 + 8001356: 4613 mov r3, r2 + 8001358: 009b lsls r3, r3, #2 + 800135a: 4413 add r3, r2 + 800135c: 00db lsls r3, r3, #3 + 800135e: f503 73b4 add.w r3, r3, #360 ; 0x168 + 8001362: 687a ldr r2, [r7, #4] + 8001364: 4413 add r3, r2 + 8001366: 60fb str r3, [r7, #12] + ep->is_in = 0U; + 8001368: 68fb ldr r3, [r7, #12] + 800136a: 2200 movs r2, #0 + 800136c: 705a strb r2, [r3, #1] + } + + ep->is_stall = 0U; + 800136e: 68fb ldr r3, [r7, #12] + 8001370: 2200 movs r2, #0 + 8001372: 709a strb r2, [r3, #2] + ep->num = ep_addr & EP_ADDR_MSK; + 8001374: 78fb ldrb r3, [r7, #3] + 8001376: f003 0307 and.w r3, r3, #7 + 800137a: b2da uxtb r2, r3 + 800137c: 68fb ldr r3, [r7, #12] + 800137e: 701a strb r2, [r3, #0] + + __HAL_LOCK(hpcd); + 8001380: 687b ldr r3, [r7, #4] + 8001382: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 8001386: 2b01 cmp r3, #1 + 8001388: d101 bne.n 800138e + 800138a: 2302 movs r3, #2 + 800138c: e00e b.n 80013ac + 800138e: 687b ldr r3, [r7, #4] + 8001390: 2201 movs r2, #1 + 8001392: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + (void)USB_EPClearStall(hpcd->Instance, ep); + 8001396: 687b ldr r3, [r7, #4] + 8001398: 681b ldr r3, [r3, #0] + 800139a: 68f9 ldr r1, [r7, #12] + 800139c: 4618 mov r0, r3 + 800139e: f003 fabb bl 8004918 + __HAL_UNLOCK(hpcd); + 80013a2: 687b ldr r3, [r7, #4] + 80013a4: 2200 movs r2, #0 + 80013a6: f883 22a8 strb.w r2, [r3, #680] ; 0x2a8 + + return HAL_OK; + 80013aa: 2300 movs r3, #0 +} + 80013ac: 4618 mov r0, r3 + 80013ae: 3710 adds r7, #16 + 80013b0: 46bd mov sp, r7 + 80013b2: bd80 pop {r7, pc} + +080013b4 : + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + 80013b4: b580 push {r7, lr} + 80013b6: b08e sub sp, #56 ; 0x38 + 80013b8: af00 add r7, sp, #0 + 80013ba: 6078 str r0, [r7, #4] + PCD_EPTypeDef *ep; + uint16_t count, wIstr, wEPVal, TxByteNbre; + uint8_t epindex; + + /* stay in loop while pending interrupts */ + while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) + 80013bc: e2df b.n 800197e + { + wIstr = hpcd->Instance->ISTR; + 80013be: 687b ldr r3, [r7, #4] + 80013c0: 681b ldr r3, [r3, #0] + 80013c2: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 80013c6: 85fb strh r3, [r7, #46] ; 0x2e + + /* extract highest priority endpoint number */ + epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); + 80013c8: 8dfb ldrh r3, [r7, #46] ; 0x2e + 80013ca: b2db uxtb r3, r3 + 80013cc: f003 030f and.w r3, r3, #15 + 80013d0: f887 302d strb.w r3, [r7, #45] ; 0x2d + + if (epindex == 0U) + 80013d4: f897 302d ldrb.w r3, [r7, #45] ; 0x2d + 80013d8: 2b00 cmp r3, #0 + 80013da: f040 8158 bne.w 800168e + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0U) + 80013de: 8dfb ldrh r3, [r7, #46] ; 0x2e + 80013e0: f003 0310 and.w r3, r3, #16 + 80013e4: 2b00 cmp r3, #0 + 80013e6: d152 bne.n 800148e + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + 80013e8: 687b ldr r3, [r7, #4] + 80013ea: 681b ldr r3, [r3, #0] + 80013ec: 881b ldrh r3, [r3, #0] + 80013ee: b29b uxth r3, r3 + 80013f0: f423 43e1 bic.w r3, r3, #28800 ; 0x7080 + 80013f4: f023 0370 bic.w r3, r3, #112 ; 0x70 + 80013f8: 81fb strh r3, [r7, #14] + 80013fa: 687b ldr r3, [r7, #4] + 80013fc: 681a ldr r2, [r3, #0] + 80013fe: 89fb ldrh r3, [r7, #14] + 8001400: ea6f 4343 mvn.w r3, r3, lsl #17 + 8001404: ea6f 4353 mvn.w r3, r3, lsr #17 + 8001408: b29b uxth r3, r3 + 800140a: 8013 strh r3, [r2, #0] + ep = &hpcd->IN_ep[0]; + 800140c: 687b ldr r3, [r7, #4] + 800140e: 3328 adds r3, #40 ; 0x28 + 8001410: 627b str r3, [r7, #36] ; 0x24 + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + 8001412: 687b ldr r3, [r7, #4] + 8001414: 681b ldr r3, [r3, #0] + 8001416: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 800141a: b29b uxth r3, r3 + 800141c: 461a mov r2, r3 + 800141e: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001420: 781b ldrb r3, [r3, #0] + 8001422: 00db lsls r3, r3, #3 + 8001424: 4413 add r3, r2 + 8001426: 3302 adds r3, #2 + 8001428: 005b lsls r3, r3, #1 + 800142a: 687a ldr r2, [r7, #4] + 800142c: 6812 ldr r2, [r2, #0] + 800142e: 4413 add r3, r2 + 8001430: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8001434: 881b ldrh r3, [r3, #0] + 8001436: f3c3 0209 ubfx r2, r3, #0, #10 + 800143a: 6a7b ldr r3, [r7, #36] ; 0x24 + 800143c: 61da str r2, [r3, #28] + ep->xfer_buff += ep->xfer_count; + 800143e: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001440: 695a ldr r2, [r3, #20] + 8001442: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001444: 69db ldr r3, [r3, #28] + 8001446: 441a add r2, r3 + 8001448: 6a7b ldr r3, [r7, #36] ; 0x24 + 800144a: 615a str r2, [r3, #20] + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, 0U); +#else + HAL_PCD_DataInStageCallback(hpcd, 0U); + 800144c: 2100 movs r1, #0 + 800144e: 6878 ldr r0, [r7, #4] + 8001450: f005 f98f bl 8006772 +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) + 8001454: 687b ldr r3, [r7, #4] + 8001456: f893 3024 ldrb.w r3, [r3, #36] ; 0x24 + 800145a: b2db uxtb r3, r3 + 800145c: 2b00 cmp r3, #0 + 800145e: f000 828e beq.w 800197e + 8001462: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001464: 699b ldr r3, [r3, #24] + 8001466: 2b00 cmp r3, #0 + 8001468: f040 8289 bne.w 800197e + { + hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); + 800146c: 687b ldr r3, [r7, #4] + 800146e: f893 3024 ldrb.w r3, [r3, #36] ; 0x24 + 8001472: b2db uxtb r3, r3 + 8001474: f063 037f orn r3, r3, #127 ; 0x7f + 8001478: b2da uxtb r2, r3 + 800147a: 687b ldr r3, [r7, #4] + 800147c: 681b ldr r3, [r3, #0] + 800147e: b292 uxth r2, r2 + 8001480: f8a3 204c strh.w r2, [r3, #76] ; 0x4c + hpcd->USB_Address = 0U; + 8001484: 687b ldr r3, [r7, #4] + 8001486: 2200 movs r2, #0 + 8001488: f883 2024 strb.w r2, [r3, #36] ; 0x24 + 800148c: e277 b.n 800197e + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + 800148e: 687b ldr r3, [r7, #4] + 8001490: f503 73b4 add.w r3, r3, #360 ; 0x168 + 8001494: 627b str r3, [r7, #36] ; 0x24 + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + 8001496: 687b ldr r3, [r7, #4] + 8001498: 681b ldr r3, [r3, #0] + 800149a: 881b ldrh r3, [r3, #0] + 800149c: 857b strh r3, [r7, #42] ; 0x2a + + if ((wEPVal & USB_EP_SETUP) != 0U) + 800149e: 8d7b ldrh r3, [r7, #42] ; 0x2a + 80014a0: f403 6300 and.w r3, r3, #2048 ; 0x800 + 80014a4: 2b00 cmp r3, #0 + 80014a6: d034 beq.n 8001512 + { + /* Get SETUP Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + 80014a8: 687b ldr r3, [r7, #4] + 80014aa: 681b ldr r3, [r3, #0] + 80014ac: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80014b0: b29b uxth r3, r3 + 80014b2: 461a mov r2, r3 + 80014b4: 6a7b ldr r3, [r7, #36] ; 0x24 + 80014b6: 781b ldrb r3, [r3, #0] + 80014b8: 00db lsls r3, r3, #3 + 80014ba: 4413 add r3, r2 + 80014bc: 3306 adds r3, #6 + 80014be: 005b lsls r3, r3, #1 + 80014c0: 687a ldr r2, [r7, #4] + 80014c2: 6812 ldr r2, [r2, #0] + 80014c4: 4413 add r3, r2 + 80014c6: f503 6380 add.w r3, r3, #1024 ; 0x400 + 80014ca: 881b ldrh r3, [r3, #0] + 80014cc: f3c3 0209 ubfx r2, r3, #0, #10 + 80014d0: 6a7b ldr r3, [r7, #36] ; 0x24 + 80014d2: 61da str r2, [r3, #28] + + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + 80014d4: 687b ldr r3, [r7, #4] + 80014d6: 6818 ldr r0, [r3, #0] + 80014d8: 687b ldr r3, [r7, #4] + 80014da: f503 712c add.w r1, r3, #688 ; 0x2b0 + 80014de: 6a7b ldr r3, [r7, #36] ; 0x24 + 80014e0: 88da ldrh r2, [r3, #6] + ep->pmaadress, (uint16_t)ep->xfer_count); + 80014e2: 6a7b ldr r3, [r7, #36] ; 0x24 + 80014e4: 69db ldr r3, [r3, #28] + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + 80014e6: b29b uxth r3, r3 + 80014e8: f003 fb48 bl 8004b7c + + /* SETUP bit kept frozen while CTR_RX = 1 */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + 80014ec: 687b ldr r3, [r7, #4] + 80014ee: 681b ldr r3, [r3, #0] + 80014f0: 881b ldrh r3, [r3, #0] + 80014f2: b29a uxth r2, r3 + 80014f4: f640 738f movw r3, #3983 ; 0xf8f + 80014f8: 4013 ands r3, r2 + 80014fa: 823b strh r3, [r7, #16] + 80014fc: 687b ldr r3, [r7, #4] + 80014fe: 681b ldr r3, [r3, #0] + 8001500: 8a3a ldrh r2, [r7, #16] + 8001502: f042 0280 orr.w r2, r2, #128 ; 0x80 + 8001506: b292 uxth r2, r2 + 8001508: 801a strh r2, [r3, #0] + + /* Process SETUP Packet*/ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); + 800150a: 6878 ldr r0, [r7, #4] + 800150c: f005 f904 bl 8006718 + 8001510: e235 b.n 800197e +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else if ((wEPVal & USB_EP_CTR_RX) != 0U) + 8001512: f9b7 302a ldrsh.w r3, [r7, #42] ; 0x2a + 8001516: 2b00 cmp r3, #0 + 8001518: f280 8231 bge.w 800197e + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + 800151c: 687b ldr r3, [r7, #4] + 800151e: 681b ldr r3, [r3, #0] + 8001520: 881b ldrh r3, [r3, #0] + 8001522: b29a uxth r2, r3 + 8001524: f640 738f movw r3, #3983 ; 0xf8f + 8001528: 4013 ands r3, r2 + 800152a: 83bb strh r3, [r7, #28] + 800152c: 687b ldr r3, [r7, #4] + 800152e: 681b ldr r3, [r3, #0] + 8001530: 8bba ldrh r2, [r7, #28] + 8001532: f042 0280 orr.w r2, r2, #128 ; 0x80 + 8001536: b292 uxth r2, r2 + 8001538: 801a strh r2, [r3, #0] + + /* Get Control Data OUT Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + 800153a: 687b ldr r3, [r7, #4] + 800153c: 681b ldr r3, [r3, #0] + 800153e: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001542: b29b uxth r3, r3 + 8001544: 461a mov r2, r3 + 8001546: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001548: 781b ldrb r3, [r3, #0] + 800154a: 00db lsls r3, r3, #3 + 800154c: 4413 add r3, r2 + 800154e: 3306 adds r3, #6 + 8001550: 005b lsls r3, r3, #1 + 8001552: 687a ldr r2, [r7, #4] + 8001554: 6812 ldr r2, [r2, #0] + 8001556: 4413 add r3, r2 + 8001558: f503 6380 add.w r3, r3, #1024 ; 0x400 + 800155c: 881b ldrh r3, [r3, #0] + 800155e: f3c3 0209 ubfx r2, r3, #0, #10 + 8001562: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001564: 61da str r2, [r3, #28] + + if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) + 8001566: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001568: 69db ldr r3, [r3, #28] + 800156a: 2b00 cmp r3, #0 + 800156c: d019 beq.n 80015a2 + 800156e: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001570: 695b ldr r3, [r3, #20] + 8001572: 2b00 cmp r3, #0 + 8001574: d015 beq.n 80015a2 + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + 8001576: 687b ldr r3, [r7, #4] + 8001578: 6818 ldr r0, [r3, #0] + 800157a: 6a7b ldr r3, [r7, #36] ; 0x24 + 800157c: 6959 ldr r1, [r3, #20] + 800157e: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001580: 88da ldrh r2, [r3, #6] + ep->pmaadress, (uint16_t)ep->xfer_count); + 8001582: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001584: 69db ldr r3, [r3, #28] + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + 8001586: b29b uxth r3, r3 + 8001588: f003 faf8 bl 8004b7c + + ep->xfer_buff += ep->xfer_count; + 800158c: 6a7b ldr r3, [r7, #36] ; 0x24 + 800158e: 695a ldr r2, [r3, #20] + 8001590: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001592: 69db ldr r3, [r3, #28] + 8001594: 441a add r2, r3 + 8001596: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001598: 615a str r2, [r3, #20] + + /* Process Control Data OUT Packet */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, 0U); +#else + HAL_PCD_DataOutStageCallback(hpcd, 0U); + 800159a: 2100 movs r1, #0 + 800159c: 6878 ldr r0, [r7, #4] + 800159e: f005 f8cd bl 800673c +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + 80015a2: 687b ldr r3, [r7, #4] + 80015a4: 681b ldr r3, [r3, #0] + 80015a6: 61bb str r3, [r7, #24] + 80015a8: 687b ldr r3, [r7, #4] + 80015aa: 681b ldr r3, [r3, #0] + 80015ac: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80015b0: b29b uxth r3, r3 + 80015b2: 461a mov r2, r3 + 80015b4: 69bb ldr r3, [r7, #24] + 80015b6: 4413 add r3, r2 + 80015b8: 61bb str r3, [r7, #24] + 80015ba: 69bb ldr r3, [r7, #24] + 80015bc: f203 430c addw r3, r3, #1036 ; 0x40c + 80015c0: 617b str r3, [r7, #20] + 80015c2: 6a7b ldr r3, [r7, #36] ; 0x24 + 80015c4: 691b ldr r3, [r3, #16] + 80015c6: 2b00 cmp r3, #0 + 80015c8: d112 bne.n 80015f0 + 80015ca: 697b ldr r3, [r7, #20] + 80015cc: 881b ldrh r3, [r3, #0] + 80015ce: b29b uxth r3, r3 + 80015d0: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 80015d4: b29a uxth r2, r3 + 80015d6: 697b ldr r3, [r7, #20] + 80015d8: 801a strh r2, [r3, #0] + 80015da: 697b ldr r3, [r7, #20] + 80015dc: 881b ldrh r3, [r3, #0] + 80015de: b29b uxth r3, r3 + 80015e0: ea6f 4343 mvn.w r3, r3, lsl #17 + 80015e4: ea6f 4353 mvn.w r3, r3, lsr #17 + 80015e8: b29a uxth r2, r3 + 80015ea: 697b ldr r3, [r7, #20] + 80015ec: 801a strh r2, [r3, #0] + 80015ee: e02f b.n 8001650 + 80015f0: 6a7b ldr r3, [r7, #36] ; 0x24 + 80015f2: 691b ldr r3, [r3, #16] + 80015f4: 2b3e cmp r3, #62 ; 0x3e + 80015f6: d813 bhi.n 8001620 + 80015f8: 6a7b ldr r3, [r7, #36] ; 0x24 + 80015fa: 691b ldr r3, [r3, #16] + 80015fc: 085b lsrs r3, r3, #1 + 80015fe: 633b str r3, [r7, #48] ; 0x30 + 8001600: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001602: 691b ldr r3, [r3, #16] + 8001604: f003 0301 and.w r3, r3, #1 + 8001608: 2b00 cmp r3, #0 + 800160a: d002 beq.n 8001612 + 800160c: 6b3b ldr r3, [r7, #48] ; 0x30 + 800160e: 3301 adds r3, #1 + 8001610: 633b str r3, [r7, #48] ; 0x30 + 8001612: 6b3b ldr r3, [r7, #48] ; 0x30 + 8001614: b29b uxth r3, r3 + 8001616: 029b lsls r3, r3, #10 + 8001618: b29a uxth r2, r3 + 800161a: 697b ldr r3, [r7, #20] + 800161c: 801a strh r2, [r3, #0] + 800161e: e017 b.n 8001650 + 8001620: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001622: 691b ldr r3, [r3, #16] + 8001624: 095b lsrs r3, r3, #5 + 8001626: 633b str r3, [r7, #48] ; 0x30 + 8001628: 6a7b ldr r3, [r7, #36] ; 0x24 + 800162a: 691b ldr r3, [r3, #16] + 800162c: f003 031f and.w r3, r3, #31 + 8001630: 2b00 cmp r3, #0 + 8001632: d102 bne.n 800163a + 8001634: 6b3b ldr r3, [r7, #48] ; 0x30 + 8001636: 3b01 subs r3, #1 + 8001638: 633b str r3, [r7, #48] ; 0x30 + 800163a: 6b3b ldr r3, [r7, #48] ; 0x30 + 800163c: b29b uxth r3, r3 + 800163e: 029b lsls r3, r3, #10 + 8001640: b29b uxth r3, r3 + 8001642: ea6f 4343 mvn.w r3, r3, lsl #17 + 8001646: ea6f 4353 mvn.w r3, r3, lsr #17 + 800164a: b29a uxth r2, r3 + 800164c: 697b ldr r3, [r7, #20] + 800164e: 801a strh r2, [r3, #0] + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + 8001650: 687b ldr r3, [r7, #4] + 8001652: 681b ldr r3, [r3, #0] + 8001654: 881b ldrh r3, [r3, #0] + 8001656: b29b uxth r3, r3 + 8001658: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 800165c: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001660: 827b strh r3, [r7, #18] + 8001662: 8a7b ldrh r3, [r7, #18] + 8001664: f483 5380 eor.w r3, r3, #4096 ; 0x1000 + 8001668: 827b strh r3, [r7, #18] + 800166a: 8a7b ldrh r3, [r7, #18] + 800166c: f483 5300 eor.w r3, r3, #8192 ; 0x2000 + 8001670: 827b strh r3, [r7, #18] + 8001672: 687b ldr r3, [r7, #4] + 8001674: 681a ldr r2, [r3, #0] + 8001676: 8a7b ldrh r3, [r7, #18] + 8001678: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800167c: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001680: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8001684: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8001688: b29b uxth r3, r3 + 800168a: 8013 strh r3, [r2, #0] + 800168c: e177 b.n 800197e + } + else + { + /* Decode and service non control endpoints interrupt */ + /* process related endpoint register */ + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); + 800168e: 687b ldr r3, [r7, #4] + 8001690: 681b ldr r3, [r3, #0] + 8001692: 461a mov r2, r3 + 8001694: f897 302d ldrb.w r3, [r7, #45] ; 0x2d + 8001698: 009b lsls r3, r3, #2 + 800169a: 4413 add r3, r2 + 800169c: 881b ldrh r3, [r3, #0] + 800169e: 857b strh r3, [r7, #42] ; 0x2a + + if ((wEPVal & USB_EP_CTR_RX) != 0U) + 80016a0: f9b7 302a ldrsh.w r3, [r7, #42] ; 0x2a + 80016a4: 2b00 cmp r3, #0 + 80016a6: f280 80ea bge.w 800187e + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); + 80016aa: 687b ldr r3, [r7, #4] + 80016ac: 681b ldr r3, [r3, #0] + 80016ae: 461a mov r2, r3 + 80016b0: f897 302d ldrb.w r3, [r7, #45] ; 0x2d + 80016b4: 009b lsls r3, r3, #2 + 80016b6: 4413 add r3, r2 + 80016b8: 881b ldrh r3, [r3, #0] + 80016ba: b29a uxth r2, r3 + 80016bc: f640 738f movw r3, #3983 ; 0xf8f + 80016c0: 4013 ands r3, r2 + 80016c2: 853b strh r3, [r7, #40] ; 0x28 + 80016c4: 687b ldr r3, [r7, #4] + 80016c6: 681b ldr r3, [r3, #0] + 80016c8: 461a mov r2, r3 + 80016ca: f897 302d ldrb.w r3, [r7, #45] ; 0x2d + 80016ce: 009b lsls r3, r3, #2 + 80016d0: 4413 add r3, r2 + 80016d2: 8d3a ldrh r2, [r7, #40] ; 0x28 + 80016d4: f042 0280 orr.w r2, r2, #128 ; 0x80 + 80016d8: b292 uxth r2, r2 + 80016da: 801a strh r2, [r3, #0] + ep = &hpcd->OUT_ep[epindex]; + 80016dc: f897 202d ldrb.w r2, [r7, #45] ; 0x2d + 80016e0: 4613 mov r3, r2 + 80016e2: 009b lsls r3, r3, #2 + 80016e4: 4413 add r3, r2 + 80016e6: 00db lsls r3, r3, #3 + 80016e8: f503 73b4 add.w r3, r3, #360 ; 0x168 + 80016ec: 687a ldr r2, [r7, #4] + 80016ee: 4413 add r3, r2 + 80016f0: 627b str r3, [r7, #36] ; 0x24 + + /* OUT Single Buffering */ + if (ep->doublebuffer == 0U) + 80016f2: 6a7b ldr r3, [r7, #36] ; 0x24 + 80016f4: 7b1b ldrb r3, [r3, #12] + 80016f6: 2b00 cmp r3, #0 + 80016f8: d122 bne.n 8001740 + { + count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + 80016fa: 687b ldr r3, [r7, #4] + 80016fc: 681b ldr r3, [r3, #0] + 80016fe: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001702: b29b uxth r3, r3 + 8001704: 461a mov r2, r3 + 8001706: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001708: 781b ldrb r3, [r3, #0] + 800170a: 00db lsls r3, r3, #3 + 800170c: 4413 add r3, r2 + 800170e: 3306 adds r3, #6 + 8001710: 005b lsls r3, r3, #1 + 8001712: 687a ldr r2, [r7, #4] + 8001714: 6812 ldr r2, [r2, #0] + 8001716: 4413 add r3, r2 + 8001718: f503 6380 add.w r3, r3, #1024 ; 0x400 + 800171c: 881b ldrh r3, [r3, #0] + 800171e: f3c3 0309 ubfx r3, r3, #0, #10 + 8001722: 86fb strh r3, [r7, #54] ; 0x36 + + if (count != 0U) + 8001724: 8efb ldrh r3, [r7, #54] ; 0x36 + 8001726: 2b00 cmp r3, #0 + 8001728: f000 8087 beq.w 800183a + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + 800172c: 687b ldr r3, [r7, #4] + 800172e: 6818 ldr r0, [r3, #0] + 8001730: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001732: 6959 ldr r1, [r3, #20] + 8001734: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001736: 88da ldrh r2, [r3, #6] + 8001738: 8efb ldrh r3, [r7, #54] ; 0x36 + 800173a: f003 fa1f bl 8004b7c + 800173e: e07c b.n 800183a + } + } + else + { + /* manage double buffer bulk out */ + if (ep->type == EP_TYPE_BULK) + 8001740: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001742: 78db ldrb r3, [r3, #3] + 8001744: 2b02 cmp r3, #2 + 8001746: d108 bne.n 800175a + { + count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); + 8001748: 8d7b ldrh r3, [r7, #42] ; 0x2a + 800174a: 461a mov r2, r3 + 800174c: 6a79 ldr r1, [r7, #36] ; 0x24 + 800174e: 6878 ldr r0, [r7, #4] + 8001750: f000 f923 bl 800199a + 8001754: 4603 mov r3, r0 + 8001756: 86fb strh r3, [r7, #54] ; 0x36 + 8001758: e06f b.n 800183a + } + else /* manage double buffer iso out */ + { + /* free EP OUT Buffer */ + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + 800175a: 687b ldr r3, [r7, #4] + 800175c: 681b ldr r3, [r3, #0] + 800175e: 461a mov r2, r3 + 8001760: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001762: 781b ldrb r3, [r3, #0] + 8001764: 009b lsls r3, r3, #2 + 8001766: 4413 add r3, r2 + 8001768: 881b ldrh r3, [r3, #0] + 800176a: b29b uxth r3, r3 + 800176c: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8001770: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001774: 847b strh r3, [r7, #34] ; 0x22 + 8001776: 687b ldr r3, [r7, #4] + 8001778: 681b ldr r3, [r3, #0] + 800177a: 461a mov r2, r3 + 800177c: 6a7b ldr r3, [r7, #36] ; 0x24 + 800177e: 781b ldrb r3, [r3, #0] + 8001780: 009b lsls r3, r3, #2 + 8001782: 441a add r2, r3 + 8001784: 8c7b ldrh r3, [r7, #34] ; 0x22 + 8001786: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800178a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800178e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8001792: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8001796: b29b uxth r3, r3 + 8001798: 8013 strh r3, [r2, #0] + + if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) + 800179a: 687b ldr r3, [r7, #4] + 800179c: 681b ldr r3, [r3, #0] + 800179e: 461a mov r2, r3 + 80017a0: 6a7b ldr r3, [r7, #36] ; 0x24 + 80017a2: 781b ldrb r3, [r3, #0] + 80017a4: 009b lsls r3, r3, #2 + 80017a6: 4413 add r3, r2 + 80017a8: 881b ldrh r3, [r3, #0] + 80017aa: b29b uxth r3, r3 + 80017ac: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 80017b0: 2b00 cmp r3, #0 + 80017b2: d021 beq.n 80017f8 + { + /* read from endpoint BUF0Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + 80017b4: 687b ldr r3, [r7, #4] + 80017b6: 681b ldr r3, [r3, #0] + 80017b8: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80017bc: b29b uxth r3, r3 + 80017be: 461a mov r2, r3 + 80017c0: 6a7b ldr r3, [r7, #36] ; 0x24 + 80017c2: 781b ldrb r3, [r3, #0] + 80017c4: 00db lsls r3, r3, #3 + 80017c6: 4413 add r3, r2 + 80017c8: 3302 adds r3, #2 + 80017ca: 005b lsls r3, r3, #1 + 80017cc: 687a ldr r2, [r7, #4] + 80017ce: 6812 ldr r2, [r2, #0] + 80017d0: 4413 add r3, r2 + 80017d2: f503 6380 add.w r3, r3, #1024 ; 0x400 + 80017d6: 881b ldrh r3, [r3, #0] + 80017d8: f3c3 0309 ubfx r3, r3, #0, #10 + 80017dc: 86fb strh r3, [r7, #54] ; 0x36 + + if (count != 0U) + 80017de: 8efb ldrh r3, [r7, #54] ; 0x36 + 80017e0: 2b00 cmp r3, #0 + 80017e2: d02a beq.n 800183a + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + 80017e4: 687b ldr r3, [r7, #4] + 80017e6: 6818 ldr r0, [r3, #0] + 80017e8: 6a7b ldr r3, [r7, #36] ; 0x24 + 80017ea: 6959 ldr r1, [r3, #20] + 80017ec: 6a7b ldr r3, [r7, #36] ; 0x24 + 80017ee: 891a ldrh r2, [r3, #8] + 80017f0: 8efb ldrh r3, [r7, #54] ; 0x36 + 80017f2: f003 f9c3 bl 8004b7c + 80017f6: e020 b.n 800183a + } + } + else + { + /* read from endpoint BUF1Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + 80017f8: 687b ldr r3, [r7, #4] + 80017fa: 681b ldr r3, [r3, #0] + 80017fc: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001800: b29b uxth r3, r3 + 8001802: 461a mov r2, r3 + 8001804: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001806: 781b ldrb r3, [r3, #0] + 8001808: 00db lsls r3, r3, #3 + 800180a: 4413 add r3, r2 + 800180c: 3306 adds r3, #6 + 800180e: 005b lsls r3, r3, #1 + 8001810: 687a ldr r2, [r7, #4] + 8001812: 6812 ldr r2, [r2, #0] + 8001814: 4413 add r3, r2 + 8001816: f503 6380 add.w r3, r3, #1024 ; 0x400 + 800181a: 881b ldrh r3, [r3, #0] + 800181c: f3c3 0309 ubfx r3, r3, #0, #10 + 8001820: 86fb strh r3, [r7, #54] ; 0x36 + + if (count != 0U) + 8001822: 8efb ldrh r3, [r7, #54] ; 0x36 + 8001824: 2b00 cmp r3, #0 + 8001826: d008 beq.n 800183a + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + 8001828: 687b ldr r3, [r7, #4] + 800182a: 6818 ldr r0, [r3, #0] + 800182c: 6a7b ldr r3, [r7, #36] ; 0x24 + 800182e: 6959 ldr r1, [r3, #20] + 8001830: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001832: 895a ldrh r2, [r3, #10] + 8001834: 8efb ldrh r3, [r7, #54] ; 0x36 + 8001836: f003 f9a1 bl 8004b7c + } + } + } + } + /* multi-packet on the NON control OUT endpoint */ + ep->xfer_count += count; + 800183a: 6a7b ldr r3, [r7, #36] ; 0x24 + 800183c: 69da ldr r2, [r3, #28] + 800183e: 8efb ldrh r3, [r7, #54] ; 0x36 + 8001840: 441a add r2, r3 + 8001842: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001844: 61da str r2, [r3, #28] + ep->xfer_buff += count; + 8001846: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001848: 695a ldr r2, [r3, #20] + 800184a: 8efb ldrh r3, [r7, #54] ; 0x36 + 800184c: 441a add r2, r3 + 800184e: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001850: 615a str r2, [r3, #20] + + if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) + 8001852: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001854: 699b ldr r3, [r3, #24] + 8001856: 2b00 cmp r3, #0 + 8001858: d004 beq.n 8001864 + 800185a: 8efa ldrh r2, [r7, #54] ; 0x36 + 800185c: 6a7b ldr r3, [r7, #36] ; 0x24 + 800185e: 691b ldr r3, [r3, #16] + 8001860: 429a cmp r2, r3 + 8001862: d206 bcs.n 8001872 + { + /* RX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataOutStageCallback(hpcd, ep->num); + 8001864: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001866: 781b ldrb r3, [r3, #0] + 8001868: 4619 mov r1, r3 + 800186a: 6878 ldr r0, [r7, #4] + 800186c: f004 ff66 bl 800673c + 8001870: e005 b.n 800187e +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + (void) USB_EPStartXfer(hpcd->Instance, ep); + 8001872: 687b ldr r3, [r7, #4] + 8001874: 681b ldr r3, [r3, #0] + 8001876: 6a79 ldr r1, [r7, #36] ; 0x24 + 8001878: 4618 mov r0, r3 + 800187a: f001 fedd bl 8003638 + } + + } + + if ((wEPVal & USB_EP_CTR_TX) != 0U) + 800187e: 8d7b ldrh r3, [r7, #42] ; 0x2a + 8001880: f003 0380 and.w r3, r3, #128 ; 0x80 + 8001884: 2b00 cmp r3, #0 + 8001886: d07a beq.n 800197e + { + ep = &hpcd->IN_ep[epindex]; + 8001888: f897 302d ldrb.w r3, [r7, #45] ; 0x2d + 800188c: 1c5a adds r2, r3, #1 + 800188e: 4613 mov r3, r2 + 8001890: 009b lsls r3, r3, #2 + 8001892: 4413 add r3, r2 + 8001894: 00db lsls r3, r3, #3 + 8001896: 687a ldr r2, [r7, #4] + 8001898: 4413 add r3, r2 + 800189a: 627b str r3, [r7, #36] ; 0x24 + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); + 800189c: 687b ldr r3, [r7, #4] + 800189e: 681b ldr r3, [r3, #0] + 80018a0: 461a mov r2, r3 + 80018a2: f897 302d ldrb.w r3, [r7, #45] ; 0x2d + 80018a6: 009b lsls r3, r3, #2 + 80018a8: 4413 add r3, r2 + 80018aa: 881b ldrh r3, [r3, #0] + 80018ac: b29b uxth r3, r3 + 80018ae: f423 43e1 bic.w r3, r3, #28800 ; 0x7080 + 80018b2: f023 0370 bic.w r3, r3, #112 ; 0x70 + 80018b6: 843b strh r3, [r7, #32] + 80018b8: 687b ldr r3, [r7, #4] + 80018ba: 681b ldr r3, [r3, #0] + 80018bc: 461a mov r2, r3 + 80018be: f897 302d ldrb.w r3, [r7, #45] ; 0x2d + 80018c2: 009b lsls r3, r3, #2 + 80018c4: 441a add r2, r3 + 80018c6: 8c3b ldrh r3, [r7, #32] + 80018c8: ea6f 4343 mvn.w r3, r3, lsl #17 + 80018cc: ea6f 4353 mvn.w r3, r3, lsr #17 + 80018d0: b29b uxth r3, r3 + 80018d2: 8013 strh r3, [r2, #0] + + /* Manage all non bulk transaction or Bulk Single Buffer Transaction */ + if ((ep->type != EP_TYPE_BULK) || + 80018d4: 6a7b ldr r3, [r7, #36] ; 0x24 + 80018d6: 78db ldrb r3, [r3, #3] + 80018d8: 2b02 cmp r3, #2 + 80018da: d108 bne.n 80018ee + ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))) + 80018dc: 6a7b ldr r3, [r7, #36] ; 0x24 + 80018de: 78db ldrb r3, [r3, #3] + if ((ep->type != EP_TYPE_BULK) || + 80018e0: 2b02 cmp r3, #2 + 80018e2: d146 bne.n 8001972 + ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))) + 80018e4: 8d7b ldrh r3, [r7, #42] ; 0x2a + 80018e6: f403 7380 and.w r3, r3, #256 ; 0x100 + 80018ea: 2b00 cmp r3, #0 + 80018ec: d141 bne.n 8001972 + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + 80018ee: 687b ldr r3, [r7, #4] + 80018f0: 681b ldr r3, [r3, #0] + 80018f2: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80018f6: b29b uxth r3, r3 + 80018f8: 461a mov r2, r3 + 80018fa: 6a7b ldr r3, [r7, #36] ; 0x24 + 80018fc: 781b ldrb r3, [r3, #0] + 80018fe: 00db lsls r3, r3, #3 + 8001900: 4413 add r3, r2 + 8001902: 3302 adds r3, #2 + 8001904: 005b lsls r3, r3, #1 + 8001906: 687a ldr r2, [r7, #4] + 8001908: 6812 ldr r2, [r2, #0] + 800190a: 4413 add r3, r2 + 800190c: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8001910: 881b ldrh r3, [r3, #0] + 8001912: f3c3 0309 ubfx r3, r3, #0, #10 + 8001916: 83fb strh r3, [r7, #30] + + if (ep->xfer_len > TxByteNbre) + 8001918: 6a7b ldr r3, [r7, #36] ; 0x24 + 800191a: 699a ldr r2, [r3, #24] + 800191c: 8bfb ldrh r3, [r7, #30] + 800191e: 429a cmp r2, r3 + 8001920: d906 bls.n 8001930 + { + ep->xfer_len -= TxByteNbre; + 8001922: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001924: 699a ldr r2, [r3, #24] + 8001926: 8bfb ldrh r3, [r7, #30] + 8001928: 1ad2 subs r2, r2, r3 + 800192a: 6a7b ldr r3, [r7, #36] ; 0x24 + 800192c: 619a str r2, [r3, #24] + 800192e: e002 b.n 8001936 + } + else + { + ep->xfer_len = 0U; + 8001930: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001932: 2200 movs r2, #0 + 8001934: 619a str r2, [r3, #24] + } + + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + 8001936: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001938: 699b ldr r3, [r3, #24] + 800193a: 2b00 cmp r3, #0 + 800193c: d106 bne.n 800194c + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); + 800193e: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001940: 781b ldrb r3, [r3, #0] + 8001942: 4619 mov r1, r3 + 8001944: 6878 ldr r0, [r7, #4] + 8001946: f004 ff14 bl 8006772 + 800194a: e018 b.n 800197e +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Transfer is not yet Done */ + ep->xfer_buff += TxByteNbre; + 800194c: 6a7b ldr r3, [r7, #36] ; 0x24 + 800194e: 695a ldr r2, [r3, #20] + 8001950: 8bfb ldrh r3, [r7, #30] + 8001952: 441a add r2, r3 + 8001954: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001956: 615a str r2, [r3, #20] + ep->xfer_count += TxByteNbre; + 8001958: 6a7b ldr r3, [r7, #36] ; 0x24 + 800195a: 69da ldr r2, [r3, #28] + 800195c: 8bfb ldrh r3, [r7, #30] + 800195e: 441a add r2, r3 + 8001960: 6a7b ldr r3, [r7, #36] ; 0x24 + 8001962: 61da str r2, [r3, #28] + (void)USB_EPStartXfer(hpcd->Instance, ep); + 8001964: 687b ldr r3, [r7, #4] + 8001966: 681b ldr r3, [r3, #0] + 8001968: 6a79 ldr r1, [r7, #36] ; 0x24 + 800196a: 4618 mov r0, r3 + 800196c: f001 fe64 bl 8003638 + if (ep->xfer_len == 0U) + 8001970: e005 b.n 800197e + } + } + /* bulk in double buffer enable in case of transferLen> Ep_Mps */ + else + { + (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); + 8001972: 8d7b ldrh r3, [r7, #42] ; 0x2a + 8001974: 461a mov r2, r3 + 8001976: 6a79 ldr r1, [r7, #36] ; 0x24 + 8001978: 6878 ldr r0, [r7, #4] + 800197a: f000 f91b bl 8001bb4 + while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) + 800197e: 687b ldr r3, [r7, #4] + 8001980: 681b ldr r3, [r3, #0] + 8001982: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8001986: b29b uxth r3, r3 + 8001988: b21b sxth r3, r3 + 800198a: 2b00 cmp r3, #0 + 800198c: f6ff ad17 blt.w 80013be + } + } + } + } + + return HAL_OK; + 8001990: 2300 movs r3, #0 +} + 8001992: 4618 mov r0, r3 + 8001994: 3738 adds r7, #56 ; 0x38 + 8001996: 46bd mov sp, r7 + 8001998: bd80 pop {r7, pc} + +0800199a : + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + 800199a: b580 push {r7, lr} + 800199c: b088 sub sp, #32 + 800199e: af00 add r7, sp, #0 + 80019a0: 60f8 str r0, [r7, #12] + 80019a2: 60b9 str r1, [r7, #8] + 80019a4: 4613 mov r3, r2 + 80019a6: 80fb strh r3, [r7, #6] + uint16_t count; + + /* Manage Buffer0 OUT */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + 80019a8: 88fb ldrh r3, [r7, #6] + 80019aa: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 80019ae: 2b00 cmp r3, #0 + 80019b0: d07e beq.n 8001ab0 + { + /* Get count of received Data on buffer0 */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + 80019b2: 68fb ldr r3, [r7, #12] + 80019b4: 681b ldr r3, [r3, #0] + 80019b6: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80019ba: b29b uxth r3, r3 + 80019bc: 461a mov r2, r3 + 80019be: 68bb ldr r3, [r7, #8] + 80019c0: 781b ldrb r3, [r3, #0] + 80019c2: 00db lsls r3, r3, #3 + 80019c4: 4413 add r3, r2 + 80019c6: 3302 adds r3, #2 + 80019c8: 005b lsls r3, r3, #1 + 80019ca: 68fa ldr r2, [r7, #12] + 80019cc: 6812 ldr r2, [r2, #0] + 80019ce: 4413 add r3, r2 + 80019d0: f503 6380 add.w r3, r3, #1024 ; 0x400 + 80019d4: 881b ldrh r3, [r3, #0] + 80019d6: f3c3 0309 ubfx r3, r3, #0, #10 + 80019da: 837b strh r3, [r7, #26] + + if (ep->xfer_len >= count) + 80019dc: 68bb ldr r3, [r7, #8] + 80019de: 699a ldr r2, [r3, #24] + 80019e0: 8b7b ldrh r3, [r7, #26] + 80019e2: 429a cmp r2, r3 + 80019e4: d306 bcc.n 80019f4 + { + ep->xfer_len -= count; + 80019e6: 68bb ldr r3, [r7, #8] + 80019e8: 699a ldr r2, [r3, #24] + 80019ea: 8b7b ldrh r3, [r7, #26] + 80019ec: 1ad2 subs r2, r2, r3 + 80019ee: 68bb ldr r3, [r7, #8] + 80019f0: 619a str r2, [r3, #24] + 80019f2: e002 b.n 80019fa + } + else + { + ep->xfer_len = 0U; + 80019f4: 68bb ldr r3, [r7, #8] + 80019f6: 2200 movs r2, #0 + 80019f8: 619a str r2, [r3, #24] + } + + if (ep->xfer_len == 0U) + 80019fa: 68bb ldr r3, [r7, #8] + 80019fc: 699b ldr r3, [r3, #24] + 80019fe: 2b00 cmp r3, #0 + 8001a00: d123 bne.n 8001a4a + { + /* set NAK to OUT endpoint since double buffer is enabled */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + 8001a02: 68fb ldr r3, [r7, #12] + 8001a04: 681b ldr r3, [r3, #0] + 8001a06: 461a mov r2, r3 + 8001a08: 68bb ldr r3, [r7, #8] + 8001a0a: 781b ldrb r3, [r3, #0] + 8001a0c: 009b lsls r3, r3, #2 + 8001a0e: 4413 add r3, r2 + 8001a10: 881b ldrh r3, [r3, #0] + 8001a12: b29b uxth r3, r3 + 8001a14: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8001a18: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001a1c: 833b strh r3, [r7, #24] + 8001a1e: 8b3b ldrh r3, [r7, #24] + 8001a20: f483 5300 eor.w r3, r3, #8192 ; 0x2000 + 8001a24: 833b strh r3, [r7, #24] + 8001a26: 68fb ldr r3, [r7, #12] + 8001a28: 681b ldr r3, [r3, #0] + 8001a2a: 461a mov r2, r3 + 8001a2c: 68bb ldr r3, [r7, #8] + 8001a2e: 781b ldrb r3, [r3, #0] + 8001a30: 009b lsls r3, r3, #2 + 8001a32: 441a add r2, r3 + 8001a34: 8b3b ldrh r3, [r7, #24] + 8001a36: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001a3a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001a3e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8001a42: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8001a46: b29b uxth r3, r3 + 8001a48: 8013 strh r3, [r2, #0] + } + + /* Check if Buffer1 is in blocked sate which requires to toggle */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + 8001a4a: 88fb ldrh r3, [r7, #6] + 8001a4c: f003 0340 and.w r3, r3, #64 ; 0x40 + 8001a50: 2b00 cmp r3, #0 + 8001a52: d01f beq.n 8001a94 + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + 8001a54: 68fb ldr r3, [r7, #12] + 8001a56: 681b ldr r3, [r3, #0] + 8001a58: 461a mov r2, r3 + 8001a5a: 68bb ldr r3, [r7, #8] + 8001a5c: 781b ldrb r3, [r3, #0] + 8001a5e: 009b lsls r3, r3, #2 + 8001a60: 4413 add r3, r2 + 8001a62: 881b ldrh r3, [r3, #0] + 8001a64: b29b uxth r3, r3 + 8001a66: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8001a6a: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001a6e: 82fb strh r3, [r7, #22] + 8001a70: 68fb ldr r3, [r7, #12] + 8001a72: 681b ldr r3, [r3, #0] + 8001a74: 461a mov r2, r3 + 8001a76: 68bb ldr r3, [r7, #8] + 8001a78: 781b ldrb r3, [r3, #0] + 8001a7a: 009b lsls r3, r3, #2 + 8001a7c: 441a add r2, r3 + 8001a7e: 8afb ldrh r3, [r7, #22] + 8001a80: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001a84: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001a88: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8001a8c: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8001a90: b29b uxth r3, r3 + 8001a92: 8013 strh r3, [r2, #0] + } + + if (count != 0U) + 8001a94: 8b7b ldrh r3, [r7, #26] + 8001a96: 2b00 cmp r3, #0 + 8001a98: f000 8087 beq.w 8001baa + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + 8001a9c: 68fb ldr r3, [r7, #12] + 8001a9e: 6818 ldr r0, [r3, #0] + 8001aa0: 68bb ldr r3, [r7, #8] + 8001aa2: 6959 ldr r1, [r3, #20] + 8001aa4: 68bb ldr r3, [r7, #8] + 8001aa6: 891a ldrh r2, [r3, #8] + 8001aa8: 8b7b ldrh r3, [r7, #26] + 8001aaa: f003 f867 bl 8004b7c + 8001aae: e07c b.n 8001baa + } + /* Manage Buffer 1 DTOG_RX=0 */ + else + { + /* Get count of received data */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + 8001ab0: 68fb ldr r3, [r7, #12] + 8001ab2: 681b ldr r3, [r3, #0] + 8001ab4: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001ab8: b29b uxth r3, r3 + 8001aba: 461a mov r2, r3 + 8001abc: 68bb ldr r3, [r7, #8] + 8001abe: 781b ldrb r3, [r3, #0] + 8001ac0: 00db lsls r3, r3, #3 + 8001ac2: 4413 add r3, r2 + 8001ac4: 3306 adds r3, #6 + 8001ac6: 005b lsls r3, r3, #1 + 8001ac8: 68fa ldr r2, [r7, #12] + 8001aca: 6812 ldr r2, [r2, #0] + 8001acc: 4413 add r3, r2 + 8001ace: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8001ad2: 881b ldrh r3, [r3, #0] + 8001ad4: f3c3 0309 ubfx r3, r3, #0, #10 + 8001ad8: 837b strh r3, [r7, #26] + + if (ep->xfer_len >= count) + 8001ada: 68bb ldr r3, [r7, #8] + 8001adc: 699a ldr r2, [r3, #24] + 8001ade: 8b7b ldrh r3, [r7, #26] + 8001ae0: 429a cmp r2, r3 + 8001ae2: d306 bcc.n 8001af2 + { + ep->xfer_len -= count; + 8001ae4: 68bb ldr r3, [r7, #8] + 8001ae6: 699a ldr r2, [r3, #24] + 8001ae8: 8b7b ldrh r3, [r7, #26] + 8001aea: 1ad2 subs r2, r2, r3 + 8001aec: 68bb ldr r3, [r7, #8] + 8001aee: 619a str r2, [r3, #24] + 8001af0: e002 b.n 8001af8 + } + else + { + ep->xfer_len = 0U; + 8001af2: 68bb ldr r3, [r7, #8] + 8001af4: 2200 movs r2, #0 + 8001af6: 619a str r2, [r3, #24] + } + + if (ep->xfer_len == 0U) + 8001af8: 68bb ldr r3, [r7, #8] + 8001afa: 699b ldr r3, [r3, #24] + 8001afc: 2b00 cmp r3, #0 + 8001afe: d123 bne.n 8001b48 + { + /* set NAK on the current endpoint */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + 8001b00: 68fb ldr r3, [r7, #12] + 8001b02: 681b ldr r3, [r3, #0] + 8001b04: 461a mov r2, r3 + 8001b06: 68bb ldr r3, [r7, #8] + 8001b08: 781b ldrb r3, [r3, #0] + 8001b0a: 009b lsls r3, r3, #2 + 8001b0c: 4413 add r3, r2 + 8001b0e: 881b ldrh r3, [r3, #0] + 8001b10: b29b uxth r3, r3 + 8001b12: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8001b16: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001b1a: 83fb strh r3, [r7, #30] + 8001b1c: 8bfb ldrh r3, [r7, #30] + 8001b1e: f483 5300 eor.w r3, r3, #8192 ; 0x2000 + 8001b22: 83fb strh r3, [r7, #30] + 8001b24: 68fb ldr r3, [r7, #12] + 8001b26: 681b ldr r3, [r3, #0] + 8001b28: 461a mov r2, r3 + 8001b2a: 68bb ldr r3, [r7, #8] + 8001b2c: 781b ldrb r3, [r3, #0] + 8001b2e: 009b lsls r3, r3, #2 + 8001b30: 441a add r2, r3 + 8001b32: 8bfb ldrh r3, [r7, #30] + 8001b34: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001b38: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001b3c: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8001b40: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8001b44: b29b uxth r3, r3 + 8001b46: 8013 strh r3, [r2, #0] + } + + /*Need to FreeUser Buffer*/ + if ((wEPVal & USB_EP_DTOG_TX) == 0U) + 8001b48: 88fb ldrh r3, [r7, #6] + 8001b4a: f003 0340 and.w r3, r3, #64 ; 0x40 + 8001b4e: 2b00 cmp r3, #0 + 8001b50: d11f bne.n 8001b92 + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + 8001b52: 68fb ldr r3, [r7, #12] + 8001b54: 681b ldr r3, [r3, #0] + 8001b56: 461a mov r2, r3 + 8001b58: 68bb ldr r3, [r7, #8] + 8001b5a: 781b ldrb r3, [r3, #0] + 8001b5c: 009b lsls r3, r3, #2 + 8001b5e: 4413 add r3, r2 + 8001b60: 881b ldrh r3, [r3, #0] + 8001b62: b29b uxth r3, r3 + 8001b64: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8001b68: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001b6c: 83bb strh r3, [r7, #28] + 8001b6e: 68fb ldr r3, [r7, #12] + 8001b70: 681b ldr r3, [r3, #0] + 8001b72: 461a mov r2, r3 + 8001b74: 68bb ldr r3, [r7, #8] + 8001b76: 781b ldrb r3, [r3, #0] + 8001b78: 009b lsls r3, r3, #2 + 8001b7a: 441a add r2, r3 + 8001b7c: 8bbb ldrh r3, [r7, #28] + 8001b7e: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001b82: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001b86: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8001b8a: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8001b8e: b29b uxth r3, r3 + 8001b90: 8013 strh r3, [r2, #0] + } + + if (count != 0U) + 8001b92: 8b7b ldrh r3, [r7, #26] + 8001b94: 2b00 cmp r3, #0 + 8001b96: d008 beq.n 8001baa + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + 8001b98: 68fb ldr r3, [r7, #12] + 8001b9a: 6818 ldr r0, [r3, #0] + 8001b9c: 68bb ldr r3, [r7, #8] + 8001b9e: 6959 ldr r1, [r3, #20] + 8001ba0: 68bb ldr r3, [r7, #8] + 8001ba2: 895a ldrh r2, [r3, #10] + 8001ba4: 8b7b ldrh r3, [r7, #26] + 8001ba6: f002 ffe9 bl 8004b7c + } + } + + return count; + 8001baa: 8b7b ldrh r3, [r7, #26] +} + 8001bac: 4618 mov r0, r3 + 8001bae: 3720 adds r7, #32 + 8001bb0: 46bd mov sp, r7 + 8001bb2: bd80 pop {r7, pc} + +08001bb4 : + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + 8001bb4: b580 push {r7, lr} + 8001bb6: b092 sub sp, #72 ; 0x48 + 8001bb8: af00 add r7, sp, #0 + 8001bba: 60f8 str r0, [r7, #12] + 8001bbc: 60b9 str r1, [r7, #8] + 8001bbe: 4613 mov r3, r2 + 8001bc0: 80fb strh r3, [r7, #6] + uint32_t len; + uint16_t TxByteNbre; + + /* Data Buffer0 ACK received */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + 8001bc2: 88fb ldrh r3, [r7, #6] + 8001bc4: f003 0340 and.w r3, r3, #64 ; 0x40 + 8001bc8: 2b00 cmp r3, #0 + 8001bca: f000 8132 beq.w 8001e32 + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + 8001bce: 68fb ldr r3, [r7, #12] + 8001bd0: 681b ldr r3, [r3, #0] + 8001bd2: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001bd6: b29b uxth r3, r3 + 8001bd8: 461a mov r2, r3 + 8001bda: 68bb ldr r3, [r7, #8] + 8001bdc: 781b ldrb r3, [r3, #0] + 8001bde: 00db lsls r3, r3, #3 + 8001be0: 4413 add r3, r2 + 8001be2: 3302 adds r3, #2 + 8001be4: 005b lsls r3, r3, #1 + 8001be6: 68fa ldr r2, [r7, #12] + 8001be8: 6812 ldr r2, [r2, #0] + 8001bea: 4413 add r3, r2 + 8001bec: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8001bf0: 881b ldrh r3, [r3, #0] + 8001bf2: f3c3 0309 ubfx r3, r3, #0, #10 + 8001bf6: 85fb strh r3, [r7, #46] ; 0x2e + + if (ep->xfer_len > TxByteNbre) + 8001bf8: 68bb ldr r3, [r7, #8] + 8001bfa: 699a ldr r2, [r3, #24] + 8001bfc: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001bfe: 429a cmp r2, r3 + 8001c00: d906 bls.n 8001c10 + { + ep->xfer_len -= TxByteNbre; + 8001c02: 68bb ldr r3, [r7, #8] + 8001c04: 699a ldr r2, [r3, #24] + 8001c06: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001c08: 1ad2 subs r2, r2, r3 + 8001c0a: 68bb ldr r3, [r7, #8] + 8001c0c: 619a str r2, [r3, #24] + 8001c0e: e002 b.n 8001c16 + } + else + { + ep->xfer_len = 0U; + 8001c10: 68bb ldr r3, [r7, #8] + 8001c12: 2200 movs r2, #0 + 8001c14: 619a str r2, [r3, #24] + } + /* Transfer is completed */ + if (ep->xfer_len == 0U) + 8001c16: 68bb ldr r3, [r7, #8] + 8001c18: 699b ldr r3, [r3, #24] + 8001c1a: 2b00 cmp r3, #0 + 8001c1c: d12c bne.n 8001c78 + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); + 8001c1e: 68bb ldr r3, [r7, #8] + 8001c20: 781b ldrb r3, [r3, #0] + 8001c22: 4619 mov r1, r3 + 8001c24: 68f8 ldr r0, [r7, #12] + 8001c26: f004 fda4 bl 8006772 +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + 8001c2a: 88fb ldrh r3, [r7, #6] + 8001c2c: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 8001c30: 2b00 cmp r3, #0 + 8001c32: f000 822f beq.w 8002094 + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + 8001c36: 68fb ldr r3, [r7, #12] + 8001c38: 681b ldr r3, [r3, #0] + 8001c3a: 461a mov r2, r3 + 8001c3c: 68bb ldr r3, [r7, #8] + 8001c3e: 781b ldrb r3, [r3, #0] + 8001c40: 009b lsls r3, r3, #2 + 8001c42: 4413 add r3, r2 + 8001c44: 881b ldrh r3, [r3, #0] + 8001c46: b29b uxth r3, r3 + 8001c48: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8001c4c: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001c50: 827b strh r3, [r7, #18] + 8001c52: 68fb ldr r3, [r7, #12] + 8001c54: 681b ldr r3, [r3, #0] + 8001c56: 461a mov r2, r3 + 8001c58: 68bb ldr r3, [r7, #8] + 8001c5a: 781b ldrb r3, [r3, #0] + 8001c5c: 009b lsls r3, r3, #2 + 8001c5e: 441a add r2, r3 + 8001c60: 8a7b ldrh r3, [r7, #18] + 8001c62: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001c66: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001c6a: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 8001c6e: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8001c72: b29b uxth r3, r3 + 8001c74: 8013 strh r3, [r2, #0] + 8001c76: e20d b.n 8002094 + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + 8001c78: 88fb ldrh r3, [r7, #6] + 8001c7a: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 8001c7e: 2b00 cmp r3, #0 + 8001c80: d01f beq.n 8001cc2 + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + 8001c82: 68fb ldr r3, [r7, #12] + 8001c84: 681b ldr r3, [r3, #0] + 8001c86: 461a mov r2, r3 + 8001c88: 68bb ldr r3, [r7, #8] + 8001c8a: 781b ldrb r3, [r3, #0] + 8001c8c: 009b lsls r3, r3, #2 + 8001c8e: 4413 add r3, r2 + 8001c90: 881b ldrh r3, [r3, #0] + 8001c92: b29b uxth r3, r3 + 8001c94: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8001c98: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001c9c: 84bb strh r3, [r7, #36] ; 0x24 + 8001c9e: 68fb ldr r3, [r7, #12] + 8001ca0: 681b ldr r3, [r3, #0] + 8001ca2: 461a mov r2, r3 + 8001ca4: 68bb ldr r3, [r7, #8] + 8001ca6: 781b ldrb r3, [r3, #0] + 8001ca8: 009b lsls r3, r3, #2 + 8001caa: 441a add r2, r3 + 8001cac: 8cbb ldrh r3, [r7, #36] ; 0x24 + 8001cae: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001cb2: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001cb6: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 8001cba: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8001cbe: b29b uxth r3, r3 + 8001cc0: 8013 strh r3, [r2, #0] + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + 8001cc2: 68bb ldr r3, [r7, #8] + 8001cc4: f893 3024 ldrb.w r3, [r3, #36] ; 0x24 + 8001cc8: 2b01 cmp r3, #1 + 8001cca: f040 81e3 bne.w 8002094 + { + ep->xfer_buff += TxByteNbre; + 8001cce: 68bb ldr r3, [r7, #8] + 8001cd0: 695a ldr r2, [r3, #20] + 8001cd2: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001cd4: 441a add r2, r3 + 8001cd6: 68bb ldr r3, [r7, #8] + 8001cd8: 615a str r2, [r3, #20] + ep->xfer_count += TxByteNbre; + 8001cda: 68bb ldr r3, [r7, #8] + 8001cdc: 69da ldr r2, [r3, #28] + 8001cde: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001ce0: 441a add r2, r3 + 8001ce2: 68bb ldr r3, [r7, #8] + 8001ce4: 61da str r2, [r3, #28] + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + 8001ce6: 68bb ldr r3, [r7, #8] + 8001ce8: 6a1a ldr r2, [r3, #32] + 8001cea: 68bb ldr r3, [r7, #8] + 8001cec: 691b ldr r3, [r3, #16] + 8001cee: 429a cmp r2, r3 + 8001cf0: d309 bcc.n 8001d06 + { + len = ep->maxpacket; + 8001cf2: 68bb ldr r3, [r7, #8] + 8001cf4: 691b ldr r3, [r3, #16] + 8001cf6: 63bb str r3, [r7, #56] ; 0x38 + ep->xfer_len_db -= len; + 8001cf8: 68bb ldr r3, [r7, #8] + 8001cfa: 6a1a ldr r2, [r3, #32] + 8001cfc: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001cfe: 1ad2 subs r2, r2, r3 + 8001d00: 68bb ldr r3, [r7, #8] + 8001d02: 621a str r2, [r3, #32] + 8001d04: e014 b.n 8001d30 + } + else if (ep->xfer_len_db == 0U) + 8001d06: 68bb ldr r3, [r7, #8] + 8001d08: 6a1b ldr r3, [r3, #32] + 8001d0a: 2b00 cmp r3, #0 + 8001d0c: d106 bne.n 8001d1c + { + len = TxByteNbre; + 8001d0e: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001d10: 63bb str r3, [r7, #56] ; 0x38 + ep->xfer_fill_db = 0U; + 8001d12: 68bb ldr r3, [r7, #8] + 8001d14: 2200 movs r2, #0 + 8001d16: f883 2024 strb.w r2, [r3, #36] ; 0x24 + 8001d1a: e009 b.n 8001d30 + } + else + { + ep->xfer_fill_db = 0U; + 8001d1c: 68bb ldr r3, [r7, #8] + 8001d1e: 2200 movs r2, #0 + 8001d20: f883 2024 strb.w r2, [r3, #36] ; 0x24 + len = ep->xfer_len_db; + 8001d24: 68bb ldr r3, [r7, #8] + 8001d26: 6a1b ldr r3, [r3, #32] + 8001d28: 63bb str r3, [r7, #56] ; 0x38 + ep->xfer_len_db = 0U; + 8001d2a: 68bb ldr r3, [r7, #8] + 8001d2c: 2200 movs r2, #0 + 8001d2e: 621a str r2, [r3, #32] + } + + /* Write remaining Data to Buffer */ + /* Set the Double buffer counter for pma buffer1 */ + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); + 8001d30: 68bb ldr r3, [r7, #8] + 8001d32: 785b ldrb r3, [r3, #1] + 8001d34: 2b00 cmp r3, #0 + 8001d36: d155 bne.n 8001de4 + 8001d38: 68fb ldr r3, [r7, #12] + 8001d3a: 681b ldr r3, [r3, #0] + 8001d3c: 61bb str r3, [r7, #24] + 8001d3e: 68fb ldr r3, [r7, #12] + 8001d40: 681b ldr r3, [r3, #0] + 8001d42: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001d46: b29b uxth r3, r3 + 8001d48: 461a mov r2, r3 + 8001d4a: 69bb ldr r3, [r7, #24] + 8001d4c: 4413 add r3, r2 + 8001d4e: 61bb str r3, [r7, #24] + 8001d50: 68bb ldr r3, [r7, #8] + 8001d52: 781b ldrb r3, [r3, #0] + 8001d54: 011a lsls r2, r3, #4 + 8001d56: 69bb ldr r3, [r7, #24] + 8001d58: 4413 add r3, r2 + 8001d5a: f203 4304 addw r3, r3, #1028 ; 0x404 + 8001d5e: 617b str r3, [r7, #20] + 8001d60: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001d62: 2b00 cmp r3, #0 + 8001d64: d112 bne.n 8001d8c + 8001d66: 697b ldr r3, [r7, #20] + 8001d68: 881b ldrh r3, [r3, #0] + 8001d6a: b29b uxth r3, r3 + 8001d6c: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8001d70: b29a uxth r2, r3 + 8001d72: 697b ldr r3, [r7, #20] + 8001d74: 801a strh r2, [r3, #0] + 8001d76: 697b ldr r3, [r7, #20] + 8001d78: 881b ldrh r3, [r3, #0] + 8001d7a: b29b uxth r3, r3 + 8001d7c: ea6f 4343 mvn.w r3, r3, lsl #17 + 8001d80: ea6f 4353 mvn.w r3, r3, lsr #17 + 8001d84: b29a uxth r2, r3 + 8001d86: 697b ldr r3, [r7, #20] + 8001d88: 801a strh r2, [r3, #0] + 8001d8a: e047 b.n 8001e1c + 8001d8c: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001d8e: 2b3e cmp r3, #62 ; 0x3e + 8001d90: d811 bhi.n 8001db6 + 8001d92: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001d94: 085b lsrs r3, r3, #1 + 8001d96: 62bb str r3, [r7, #40] ; 0x28 + 8001d98: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001d9a: f003 0301 and.w r3, r3, #1 + 8001d9e: 2b00 cmp r3, #0 + 8001da0: d002 beq.n 8001da8 + 8001da2: 6abb ldr r3, [r7, #40] ; 0x28 + 8001da4: 3301 adds r3, #1 + 8001da6: 62bb str r3, [r7, #40] ; 0x28 + 8001da8: 6abb ldr r3, [r7, #40] ; 0x28 + 8001daa: b29b uxth r3, r3 + 8001dac: 029b lsls r3, r3, #10 + 8001dae: b29a uxth r2, r3 + 8001db0: 697b ldr r3, [r7, #20] + 8001db2: 801a strh r2, [r3, #0] + 8001db4: e032 b.n 8001e1c + 8001db6: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001db8: 095b lsrs r3, r3, #5 + 8001dba: 62bb str r3, [r7, #40] ; 0x28 + 8001dbc: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001dbe: f003 031f and.w r3, r3, #31 + 8001dc2: 2b00 cmp r3, #0 + 8001dc4: d102 bne.n 8001dcc + 8001dc6: 6abb ldr r3, [r7, #40] ; 0x28 + 8001dc8: 3b01 subs r3, #1 + 8001dca: 62bb str r3, [r7, #40] ; 0x28 + 8001dcc: 6abb ldr r3, [r7, #40] ; 0x28 + 8001dce: b29b uxth r3, r3 + 8001dd0: 029b lsls r3, r3, #10 + 8001dd2: b29b uxth r3, r3 + 8001dd4: ea6f 4343 mvn.w r3, r3, lsl #17 + 8001dd8: ea6f 4353 mvn.w r3, r3, lsr #17 + 8001ddc: b29a uxth r2, r3 + 8001dde: 697b ldr r3, [r7, #20] + 8001de0: 801a strh r2, [r3, #0] + 8001de2: e01b b.n 8001e1c + 8001de4: 68bb ldr r3, [r7, #8] + 8001de6: 785b ldrb r3, [r3, #1] + 8001de8: 2b01 cmp r3, #1 + 8001dea: d117 bne.n 8001e1c + 8001dec: 68fb ldr r3, [r7, #12] + 8001dee: 681b ldr r3, [r3, #0] + 8001df0: 623b str r3, [r7, #32] + 8001df2: 68fb ldr r3, [r7, #12] + 8001df4: 681b ldr r3, [r3, #0] + 8001df6: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001dfa: b29b uxth r3, r3 + 8001dfc: 461a mov r2, r3 + 8001dfe: 6a3b ldr r3, [r7, #32] + 8001e00: 4413 add r3, r2 + 8001e02: 623b str r3, [r7, #32] + 8001e04: 68bb ldr r3, [r7, #8] + 8001e06: 781b ldrb r3, [r3, #0] + 8001e08: 011a lsls r2, r3, #4 + 8001e0a: 6a3b ldr r3, [r7, #32] + 8001e0c: 4413 add r3, r2 + 8001e0e: f203 4304 addw r3, r3, #1028 ; 0x404 + 8001e12: 61fb str r3, [r7, #28] + 8001e14: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001e16: b29a uxth r2, r3 + 8001e18: 69fb ldr r3, [r7, #28] + 8001e1a: 801a strh r2, [r3, #0] + + /* Copy user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); + 8001e1c: 68fb ldr r3, [r7, #12] + 8001e1e: 6818 ldr r0, [r3, #0] + 8001e20: 68bb ldr r3, [r7, #8] + 8001e22: 6959 ldr r1, [r3, #20] + 8001e24: 68bb ldr r3, [r7, #8] + 8001e26: 891a ldrh r2, [r3, #8] + 8001e28: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001e2a: b29b uxth r3, r3 + 8001e2c: f002 fe62 bl 8004af4 + 8001e30: e130 b.n 8002094 + } + } + else /* Data Buffer1 ACK received */ + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + 8001e32: 68fb ldr r3, [r7, #12] + 8001e34: 681b ldr r3, [r3, #0] + 8001e36: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001e3a: b29b uxth r3, r3 + 8001e3c: 461a mov r2, r3 + 8001e3e: 68bb ldr r3, [r7, #8] + 8001e40: 781b ldrb r3, [r3, #0] + 8001e42: 00db lsls r3, r3, #3 + 8001e44: 4413 add r3, r2 + 8001e46: 3306 adds r3, #6 + 8001e48: 005b lsls r3, r3, #1 + 8001e4a: 68fa ldr r2, [r7, #12] + 8001e4c: 6812 ldr r2, [r2, #0] + 8001e4e: 4413 add r3, r2 + 8001e50: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8001e54: 881b ldrh r3, [r3, #0] + 8001e56: f3c3 0309 ubfx r3, r3, #0, #10 + 8001e5a: 85fb strh r3, [r7, #46] ; 0x2e + + if (ep->xfer_len >= TxByteNbre) + 8001e5c: 68bb ldr r3, [r7, #8] + 8001e5e: 699a ldr r2, [r3, #24] + 8001e60: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001e62: 429a cmp r2, r3 + 8001e64: d306 bcc.n 8001e74 + { + ep->xfer_len -= TxByteNbre; + 8001e66: 68bb ldr r3, [r7, #8] + 8001e68: 699a ldr r2, [r3, #24] + 8001e6a: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001e6c: 1ad2 subs r2, r2, r3 + 8001e6e: 68bb ldr r3, [r7, #8] + 8001e70: 619a str r2, [r3, #24] + 8001e72: e002 b.n 8001e7a + } + else + { + ep->xfer_len = 0U; + 8001e74: 68bb ldr r3, [r7, #8] + 8001e76: 2200 movs r2, #0 + 8001e78: 619a str r2, [r3, #24] + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + 8001e7a: 68bb ldr r3, [r7, #8] + 8001e7c: 699b ldr r3, [r3, #24] + 8001e7e: 2b00 cmp r3, #0 + 8001e80: d12c bne.n 8001edc + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); + 8001e82: 68bb ldr r3, [r7, #8] + 8001e84: 781b ldrb r3, [r3, #0] + 8001e86: 4619 mov r1, r3 + 8001e88: 68f8 ldr r0, [r7, #12] + 8001e8a: f004 fc72 bl 8006772 +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + /*need to Free USB Buff*/ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + 8001e8e: 88fb ldrh r3, [r7, #6] + 8001e90: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 8001e94: 2b00 cmp r3, #0 + 8001e96: f040 80fd bne.w 8002094 + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + 8001e9a: 68fb ldr r3, [r7, #12] + 8001e9c: 681b ldr r3, [r3, #0] + 8001e9e: 461a mov r2, r3 + 8001ea0: 68bb ldr r3, [r7, #8] + 8001ea2: 781b ldrb r3, [r3, #0] + 8001ea4: 009b lsls r3, r3, #2 + 8001ea6: 4413 add r3, r2 + 8001ea8: 881b ldrh r3, [r3, #0] + 8001eaa: b29b uxth r3, r3 + 8001eac: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8001eb0: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001eb4: 84fb strh r3, [r7, #38] ; 0x26 + 8001eb6: 68fb ldr r3, [r7, #12] + 8001eb8: 681b ldr r3, [r3, #0] + 8001eba: 461a mov r2, r3 + 8001ebc: 68bb ldr r3, [r7, #8] + 8001ebe: 781b ldrb r3, [r3, #0] + 8001ec0: 009b lsls r3, r3, #2 + 8001ec2: 441a add r2, r3 + 8001ec4: 8cfb ldrh r3, [r7, #38] ; 0x26 + 8001ec6: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001eca: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001ece: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 8001ed2: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8001ed6: b29b uxth r3, r3 + 8001ed8: 8013 strh r3, [r2, #0] + 8001eda: e0db b.n 8002094 + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + 8001edc: 88fb ldrh r3, [r7, #6] + 8001ede: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 8001ee2: 2b00 cmp r3, #0 + 8001ee4: d11f bne.n 8001f26 + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + 8001ee6: 68fb ldr r3, [r7, #12] + 8001ee8: 681b ldr r3, [r3, #0] + 8001eea: 461a mov r2, r3 + 8001eec: 68bb ldr r3, [r7, #8] + 8001eee: 781b ldrb r3, [r3, #0] + 8001ef0: 009b lsls r3, r3, #2 + 8001ef2: 4413 add r3, r2 + 8001ef4: 881b ldrh r3, [r3, #0] + 8001ef6: b29b uxth r3, r3 + 8001ef8: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8001efc: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8001f00: 85bb strh r3, [r7, #44] ; 0x2c + 8001f02: 68fb ldr r3, [r7, #12] + 8001f04: 681b ldr r3, [r3, #0] + 8001f06: 461a mov r2, r3 + 8001f08: 68bb ldr r3, [r7, #8] + 8001f0a: 781b ldrb r3, [r3, #0] + 8001f0c: 009b lsls r3, r3, #2 + 8001f0e: 441a add r2, r3 + 8001f10: 8dbb ldrh r3, [r7, #44] ; 0x2c + 8001f12: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8001f16: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8001f1a: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 8001f1e: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8001f22: b29b uxth r3, r3 + 8001f24: 8013 strh r3, [r2, #0] + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + 8001f26: 68bb ldr r3, [r7, #8] + 8001f28: f893 3024 ldrb.w r3, [r3, #36] ; 0x24 + 8001f2c: 2b01 cmp r3, #1 + 8001f2e: f040 80b1 bne.w 8002094 + { + ep->xfer_buff += TxByteNbre; + 8001f32: 68bb ldr r3, [r7, #8] + 8001f34: 695a ldr r2, [r3, #20] + 8001f36: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001f38: 441a add r2, r3 + 8001f3a: 68bb ldr r3, [r7, #8] + 8001f3c: 615a str r2, [r3, #20] + ep->xfer_count += TxByteNbre; + 8001f3e: 68bb ldr r3, [r7, #8] + 8001f40: 69da ldr r2, [r3, #28] + 8001f42: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001f44: 441a add r2, r3 + 8001f46: 68bb ldr r3, [r7, #8] + 8001f48: 61da str r2, [r3, #28] + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + 8001f4a: 68bb ldr r3, [r7, #8] + 8001f4c: 6a1a ldr r2, [r3, #32] + 8001f4e: 68bb ldr r3, [r7, #8] + 8001f50: 691b ldr r3, [r3, #16] + 8001f52: 429a cmp r2, r3 + 8001f54: d309 bcc.n 8001f6a + { + len = ep->maxpacket; + 8001f56: 68bb ldr r3, [r7, #8] + 8001f58: 691b ldr r3, [r3, #16] + 8001f5a: 63bb str r3, [r7, #56] ; 0x38 + ep->xfer_len_db -= len; + 8001f5c: 68bb ldr r3, [r7, #8] + 8001f5e: 6a1a ldr r2, [r3, #32] + 8001f60: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001f62: 1ad2 subs r2, r2, r3 + 8001f64: 68bb ldr r3, [r7, #8] + 8001f66: 621a str r2, [r3, #32] + 8001f68: e014 b.n 8001f94 + } + else if (ep->xfer_len_db == 0U) + 8001f6a: 68bb ldr r3, [r7, #8] + 8001f6c: 6a1b ldr r3, [r3, #32] + 8001f6e: 2b00 cmp r3, #0 + 8001f70: d106 bne.n 8001f80 + { + len = TxByteNbre; + 8001f72: 8dfb ldrh r3, [r7, #46] ; 0x2e + 8001f74: 63bb str r3, [r7, #56] ; 0x38 + ep->xfer_fill_db = 0U; + 8001f76: 68bb ldr r3, [r7, #8] + 8001f78: 2200 movs r2, #0 + 8001f7a: f883 2024 strb.w r2, [r3, #36] ; 0x24 + 8001f7e: e009 b.n 8001f94 + } + else + { + len = ep->xfer_len_db; + 8001f80: 68bb ldr r3, [r7, #8] + 8001f82: 6a1b ldr r3, [r3, #32] + 8001f84: 63bb str r3, [r7, #56] ; 0x38 + ep->xfer_len_db = 0U; + 8001f86: 68bb ldr r3, [r7, #8] + 8001f88: 2200 movs r2, #0 + 8001f8a: 621a str r2, [r3, #32] + ep->xfer_fill_db = 0; + 8001f8c: 68bb ldr r3, [r7, #8] + 8001f8e: 2200 movs r2, #0 + 8001f90: f883 2024 strb.w r2, [r3, #36] ; 0x24 + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); + 8001f94: 68fb ldr r3, [r7, #12] + 8001f96: 681b ldr r3, [r3, #0] + 8001f98: 637b str r3, [r7, #52] ; 0x34 + 8001f9a: 68bb ldr r3, [r7, #8] + 8001f9c: 785b ldrb r3, [r3, #1] + 8001f9e: 2b00 cmp r3, #0 + 8001fa0: d155 bne.n 800204e + 8001fa2: 68fb ldr r3, [r7, #12] + 8001fa4: 681b ldr r3, [r3, #0] + 8001fa6: 647b str r3, [r7, #68] ; 0x44 + 8001fa8: 68fb ldr r3, [r7, #12] + 8001faa: 681b ldr r3, [r3, #0] + 8001fac: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8001fb0: b29b uxth r3, r3 + 8001fb2: 461a mov r2, r3 + 8001fb4: 6c7b ldr r3, [r7, #68] ; 0x44 + 8001fb6: 4413 add r3, r2 + 8001fb8: 647b str r3, [r7, #68] ; 0x44 + 8001fba: 68bb ldr r3, [r7, #8] + 8001fbc: 781b ldrb r3, [r3, #0] + 8001fbe: 011a lsls r2, r3, #4 + 8001fc0: 6c7b ldr r3, [r7, #68] ; 0x44 + 8001fc2: 4413 add r3, r2 + 8001fc4: f203 430c addw r3, r3, #1036 ; 0x40c + 8001fc8: 643b str r3, [r7, #64] ; 0x40 + 8001fca: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001fcc: 2b00 cmp r3, #0 + 8001fce: d112 bne.n 8001ff6 + 8001fd0: 6c3b ldr r3, [r7, #64] ; 0x40 + 8001fd2: 881b ldrh r3, [r3, #0] + 8001fd4: b29b uxth r3, r3 + 8001fd6: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8001fda: b29a uxth r2, r3 + 8001fdc: 6c3b ldr r3, [r7, #64] ; 0x40 + 8001fde: 801a strh r2, [r3, #0] + 8001fe0: 6c3b ldr r3, [r7, #64] ; 0x40 + 8001fe2: 881b ldrh r3, [r3, #0] + 8001fe4: b29b uxth r3, r3 + 8001fe6: ea6f 4343 mvn.w r3, r3, lsl #17 + 8001fea: ea6f 4353 mvn.w r3, r3, lsr #17 + 8001fee: b29a uxth r2, r3 + 8001ff0: 6c3b ldr r3, [r7, #64] ; 0x40 + 8001ff2: 801a strh r2, [r3, #0] + 8001ff4: e044 b.n 8002080 + 8001ff6: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001ff8: 2b3e cmp r3, #62 ; 0x3e + 8001ffa: d811 bhi.n 8002020 + 8001ffc: 6bbb ldr r3, [r7, #56] ; 0x38 + 8001ffe: 085b lsrs r3, r3, #1 + 8002000: 63fb str r3, [r7, #60] ; 0x3c + 8002002: 6bbb ldr r3, [r7, #56] ; 0x38 + 8002004: f003 0301 and.w r3, r3, #1 + 8002008: 2b00 cmp r3, #0 + 800200a: d002 beq.n 8002012 + 800200c: 6bfb ldr r3, [r7, #60] ; 0x3c + 800200e: 3301 adds r3, #1 + 8002010: 63fb str r3, [r7, #60] ; 0x3c + 8002012: 6bfb ldr r3, [r7, #60] ; 0x3c + 8002014: b29b uxth r3, r3 + 8002016: 029b lsls r3, r3, #10 + 8002018: b29a uxth r2, r3 + 800201a: 6c3b ldr r3, [r7, #64] ; 0x40 + 800201c: 801a strh r2, [r3, #0] + 800201e: e02f b.n 8002080 + 8002020: 6bbb ldr r3, [r7, #56] ; 0x38 + 8002022: 095b lsrs r3, r3, #5 + 8002024: 63fb str r3, [r7, #60] ; 0x3c + 8002026: 6bbb ldr r3, [r7, #56] ; 0x38 + 8002028: f003 031f and.w r3, r3, #31 + 800202c: 2b00 cmp r3, #0 + 800202e: d102 bne.n 8002036 + 8002030: 6bfb ldr r3, [r7, #60] ; 0x3c + 8002032: 3b01 subs r3, #1 + 8002034: 63fb str r3, [r7, #60] ; 0x3c + 8002036: 6bfb ldr r3, [r7, #60] ; 0x3c + 8002038: b29b uxth r3, r3 + 800203a: 029b lsls r3, r3, #10 + 800203c: b29b uxth r3, r3 + 800203e: ea6f 4343 mvn.w r3, r3, lsl #17 + 8002042: ea6f 4353 mvn.w r3, r3, lsr #17 + 8002046: b29a uxth r2, r3 + 8002048: 6c3b ldr r3, [r7, #64] ; 0x40 + 800204a: 801a strh r2, [r3, #0] + 800204c: e018 b.n 8002080 + 800204e: 68bb ldr r3, [r7, #8] + 8002050: 785b ldrb r3, [r3, #1] + 8002052: 2b01 cmp r3, #1 + 8002054: d114 bne.n 8002080 + 8002056: 68fb ldr r3, [r7, #12] + 8002058: 681b ldr r3, [r3, #0] + 800205a: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 800205e: b29b uxth r3, r3 + 8002060: 461a mov r2, r3 + 8002062: 6b7b ldr r3, [r7, #52] ; 0x34 + 8002064: 4413 add r3, r2 + 8002066: 637b str r3, [r7, #52] ; 0x34 + 8002068: 68bb ldr r3, [r7, #8] + 800206a: 781b ldrb r3, [r3, #0] + 800206c: 011a lsls r2, r3, #4 + 800206e: 6b7b ldr r3, [r7, #52] ; 0x34 + 8002070: 4413 add r3, r2 + 8002072: f203 430c addw r3, r3, #1036 ; 0x40c + 8002076: 633b str r3, [r7, #48] ; 0x30 + 8002078: 6bbb ldr r3, [r7, #56] ; 0x38 + 800207a: b29a uxth r2, r3 + 800207c: 6b3b ldr r3, [r7, #48] ; 0x30 + 800207e: 801a strh r2, [r3, #0] + + /* Copy the user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); + 8002080: 68fb ldr r3, [r7, #12] + 8002082: 6818 ldr r0, [r3, #0] + 8002084: 68bb ldr r3, [r7, #8] + 8002086: 6959 ldr r1, [r3, #20] + 8002088: 68bb ldr r3, [r7, #8] + 800208a: 895a ldrh r2, [r3, #10] + 800208c: 6bbb ldr r3, [r7, #56] ; 0x38 + 800208e: b29b uxth r3, r3 + 8002090: f002 fd30 bl 8004af4 + } + } + } + + /*enable endpoint IN*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + 8002094: 68fb ldr r3, [r7, #12] + 8002096: 681b ldr r3, [r3, #0] + 8002098: 461a mov r2, r3 + 800209a: 68bb ldr r3, [r7, #8] + 800209c: 781b ldrb r3, [r3, #0] + 800209e: 009b lsls r3, r3, #2 + 80020a0: 4413 add r3, r2 + 80020a2: 881b ldrh r3, [r3, #0] + 80020a4: b29b uxth r3, r3 + 80020a6: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80020aa: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80020ae: 823b strh r3, [r7, #16] + 80020b0: 8a3b ldrh r3, [r7, #16] + 80020b2: f083 0310 eor.w r3, r3, #16 + 80020b6: 823b strh r3, [r7, #16] + 80020b8: 8a3b ldrh r3, [r7, #16] + 80020ba: f083 0320 eor.w r3, r3, #32 + 80020be: 823b strh r3, [r7, #16] + 80020c0: 68fb ldr r3, [r7, #12] + 80020c2: 681b ldr r3, [r3, #0] + 80020c4: 461a mov r2, r3 + 80020c6: 68bb ldr r3, [r7, #8] + 80020c8: 781b ldrb r3, [r3, #0] + 80020ca: 009b lsls r3, r3, #2 + 80020cc: 441a add r2, r3 + 80020ce: 8a3b ldrh r3, [r7, #16] + 80020d0: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80020d4: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80020d8: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80020dc: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80020e0: b29b uxth r3, r3 + 80020e2: 8013 strh r3, [r2, #0] + + return HAL_OK; + 80020e4: 2300 movs r3, #0 +} + 80020e6: 4618 mov r0, r3 + 80020e8: 3748 adds r7, #72 ; 0x48 + 80020ea: 46bd mov sp, r7 + 80020ec: bd80 pop {r7, pc} + +080020ee : + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress) +{ + 80020ee: b480 push {r7} + 80020f0: b087 sub sp, #28 + 80020f2: af00 add r7, sp, #0 + 80020f4: 60f8 str r0, [r7, #12] + 80020f6: 607b str r3, [r7, #4] + 80020f8: 460b mov r3, r1 + 80020fa: 817b strh r3, [r7, #10] + 80020fc: 4613 mov r3, r2 + 80020fe: 813b strh r3, [r7, #8] + PCD_EPTypeDef *ep; + + /* initialize ep structure*/ + if ((0x80U & ep_addr) == 0x80U) + 8002100: 897b ldrh r3, [r7, #10] + 8002102: f003 0380 and.w r3, r3, #128 ; 0x80 + 8002106: b29b uxth r3, r3 + 8002108: 2b00 cmp r3, #0 + 800210a: d00b beq.n 8002124 + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + 800210c: 897b ldrh r3, [r7, #10] + 800210e: f003 0307 and.w r3, r3, #7 + 8002112: 1c5a adds r2, r3, #1 + 8002114: 4613 mov r3, r2 + 8002116: 009b lsls r3, r3, #2 + 8002118: 4413 add r3, r2 + 800211a: 00db lsls r3, r3, #3 + 800211c: 68fa ldr r2, [r7, #12] + 800211e: 4413 add r3, r2 + 8002120: 617b str r3, [r7, #20] + 8002122: e009 b.n 8002138 + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + 8002124: 897a ldrh r2, [r7, #10] + 8002126: 4613 mov r3, r2 + 8002128: 009b lsls r3, r3, #2 + 800212a: 4413 add r3, r2 + 800212c: 00db lsls r3, r3, #3 + 800212e: f503 73b4 add.w r3, r3, #360 ; 0x168 + 8002132: 68fa ldr r2, [r7, #12] + 8002134: 4413 add r3, r2 + 8002136: 617b str r3, [r7, #20] + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + 8002138: 893b ldrh r3, [r7, #8] + 800213a: 2b00 cmp r3, #0 + 800213c: d107 bne.n 800214e + { + /* Single Buffer */ + ep->doublebuffer = 0U; + 800213e: 697b ldr r3, [r7, #20] + 8002140: 2200 movs r2, #0 + 8002142: 731a strb r2, [r3, #12] + /* Configure the PMA */ + ep->pmaadress = (uint16_t)pmaadress; + 8002144: 687b ldr r3, [r7, #4] + 8002146: b29a uxth r2, r3 + 8002148: 697b ldr r3, [r7, #20] + 800214a: 80da strh r2, [r3, #6] + 800214c: e00b b.n 8002166 + } + else /* USB_DBL_BUF */ + { + /* Double Buffer Endpoint */ + ep->doublebuffer = 1U; + 800214e: 697b ldr r3, [r7, #20] + 8002150: 2201 movs r2, #1 + 8002152: 731a strb r2, [r3, #12] + /* Configure the PMA */ + ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); + 8002154: 687b ldr r3, [r7, #4] + 8002156: b29a uxth r2, r3 + 8002158: 697b ldr r3, [r7, #20] + 800215a: 811a strh r2, [r3, #8] + ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); + 800215c: 687b ldr r3, [r7, #4] + 800215e: 0c1b lsrs r3, r3, #16 + 8002160: b29a uxth r2, r3 + 8002162: 697b ldr r3, [r7, #20] + 8002164: 815a strh r2, [r3, #10] + } + + return HAL_OK; + 8002166: 2300 movs r3, #0 +} + 8002168: 4618 mov r0, r3 + 800216a: 371c adds r7, #28 + 800216c: 46bd mov sp, r7 + 800216e: bc80 pop {r7} + 8002170: 4770 bx lr + ... + +08002174 : + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + 8002174: b580 push {r7, lr} + 8002176: b086 sub sp, #24 + 8002178: af00 add r7, sp, #0 + 800217a: 6078 str r0, [r7, #4] + uint32_t tickstart; + uint32_t pll_config; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + 800217c: 687b ldr r3, [r7, #4] + 800217e: 2b00 cmp r3, #0 + 8002180: d101 bne.n 8002186 + { + return HAL_ERROR; + 8002182: 2301 movs r3, #1 + 8002184: e26c b.n 8002660 + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + 8002186: 687b ldr r3, [r7, #4] + 8002188: 681b ldr r3, [r3, #0] + 800218a: f003 0301 and.w r3, r3, #1 + 800218e: 2b00 cmp r3, #0 + 8002190: f000 8087 beq.w 80022a2 + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + 8002194: 4b92 ldr r3, [pc, #584] ; (80023e0 ) + 8002196: 685b ldr r3, [r3, #4] + 8002198: f003 030c and.w r3, r3, #12 + 800219c: 2b04 cmp r3, #4 + 800219e: d00c beq.n 80021ba + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + 80021a0: 4b8f ldr r3, [pc, #572] ; (80023e0 ) + 80021a2: 685b ldr r3, [r3, #4] + 80021a4: f003 030c and.w r3, r3, #12 + 80021a8: 2b08 cmp r3, #8 + 80021aa: d112 bne.n 80021d2 + 80021ac: 4b8c ldr r3, [pc, #560] ; (80023e0 ) + 80021ae: 685b ldr r3, [r3, #4] + 80021b0: f403 3380 and.w r3, r3, #65536 ; 0x10000 + 80021b4: f5b3 3f80 cmp.w r3, #65536 ; 0x10000 + 80021b8: d10b bne.n 80021d2 + { + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 80021ba: 4b89 ldr r3, [pc, #548] ; (80023e0 ) + 80021bc: 681b ldr r3, [r3, #0] + 80021be: f403 3300 and.w r3, r3, #131072 ; 0x20000 + 80021c2: 2b00 cmp r3, #0 + 80021c4: d06c beq.n 80022a0 + 80021c6: 687b ldr r3, [r7, #4] + 80021c8: 685b ldr r3, [r3, #4] + 80021ca: 2b00 cmp r3, #0 + 80021cc: d168 bne.n 80022a0 + { + return HAL_ERROR; + 80021ce: 2301 movs r3, #1 + 80021d0: e246 b.n 8002660 + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + 80021d2: 687b ldr r3, [r7, #4] + 80021d4: 685b ldr r3, [r3, #4] + 80021d6: f5b3 3f80 cmp.w r3, #65536 ; 0x10000 + 80021da: d106 bne.n 80021ea + 80021dc: 4b80 ldr r3, [pc, #512] ; (80023e0 ) + 80021de: 681b ldr r3, [r3, #0] + 80021e0: 4a7f ldr r2, [pc, #508] ; (80023e0 ) + 80021e2: f443 3380 orr.w r3, r3, #65536 ; 0x10000 + 80021e6: 6013 str r3, [r2, #0] + 80021e8: e02e b.n 8002248 + 80021ea: 687b ldr r3, [r7, #4] + 80021ec: 685b ldr r3, [r3, #4] + 80021ee: 2b00 cmp r3, #0 + 80021f0: d10c bne.n 800220c + 80021f2: 4b7b ldr r3, [pc, #492] ; (80023e0 ) + 80021f4: 681b ldr r3, [r3, #0] + 80021f6: 4a7a ldr r2, [pc, #488] ; (80023e0 ) + 80021f8: f423 3380 bic.w r3, r3, #65536 ; 0x10000 + 80021fc: 6013 str r3, [r2, #0] + 80021fe: 4b78 ldr r3, [pc, #480] ; (80023e0 ) + 8002200: 681b ldr r3, [r3, #0] + 8002202: 4a77 ldr r2, [pc, #476] ; (80023e0 ) + 8002204: f423 2380 bic.w r3, r3, #262144 ; 0x40000 + 8002208: 6013 str r3, [r2, #0] + 800220a: e01d b.n 8002248 + 800220c: 687b ldr r3, [r7, #4] + 800220e: 685b ldr r3, [r3, #4] + 8002210: f5b3 2fa0 cmp.w r3, #327680 ; 0x50000 + 8002214: d10c bne.n 8002230 + 8002216: 4b72 ldr r3, [pc, #456] ; (80023e0 ) + 8002218: 681b ldr r3, [r3, #0] + 800221a: 4a71 ldr r2, [pc, #452] ; (80023e0 ) + 800221c: f443 2380 orr.w r3, r3, #262144 ; 0x40000 + 8002220: 6013 str r3, [r2, #0] + 8002222: 4b6f ldr r3, [pc, #444] ; (80023e0 ) + 8002224: 681b ldr r3, [r3, #0] + 8002226: 4a6e ldr r2, [pc, #440] ; (80023e0 ) + 8002228: f443 3380 orr.w r3, r3, #65536 ; 0x10000 + 800222c: 6013 str r3, [r2, #0] + 800222e: e00b b.n 8002248 + 8002230: 4b6b ldr r3, [pc, #428] ; (80023e0 ) + 8002232: 681b ldr r3, [r3, #0] + 8002234: 4a6a ldr r2, [pc, #424] ; (80023e0 ) + 8002236: f423 3380 bic.w r3, r3, #65536 ; 0x10000 + 800223a: 6013 str r3, [r2, #0] + 800223c: 4b68 ldr r3, [pc, #416] ; (80023e0 ) + 800223e: 681b ldr r3, [r3, #0] + 8002240: 4a67 ldr r2, [pc, #412] ; (80023e0 ) + 8002242: f423 2380 bic.w r3, r3, #262144 ; 0x40000 + 8002246: 6013 str r3, [r2, #0] + + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + 8002248: 687b ldr r3, [r7, #4] + 800224a: 685b ldr r3, [r3, #4] + 800224c: 2b00 cmp r3, #0 + 800224e: d013 beq.n 8002278 + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002250: f7fe f960 bl 8000514 + 8002254: 6138 str r0, [r7, #16] + + /* Wait till HSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 8002256: e008 b.n 800226a + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + 8002258: f7fe f95c bl 8000514 + 800225c: 4602 mov r2, r0 + 800225e: 693b ldr r3, [r7, #16] + 8002260: 1ad3 subs r3, r2, r3 + 8002262: 2b64 cmp r3, #100 ; 0x64 + 8002264: d901 bls.n 800226a + { + return HAL_TIMEOUT; + 8002266: 2303 movs r3, #3 + 8002268: e1fa b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 800226a: 4b5d ldr r3, [pc, #372] ; (80023e0 ) + 800226c: 681b ldr r3, [r3, #0] + 800226e: f403 3300 and.w r3, r3, #131072 ; 0x20000 + 8002272: 2b00 cmp r3, #0 + 8002274: d0f0 beq.n 8002258 + 8002276: e014 b.n 80022a2 + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002278: f7fe f94c bl 8000514 + 800227c: 6138 str r0, [r7, #16] + + /* Wait till HSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + 800227e: e008 b.n 8002292 + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + 8002280: f7fe f948 bl 8000514 + 8002284: 4602 mov r2, r0 + 8002286: 693b ldr r3, [r7, #16] + 8002288: 1ad3 subs r3, r2, r3 + 800228a: 2b64 cmp r3, #100 ; 0x64 + 800228c: d901 bls.n 8002292 + { + return HAL_TIMEOUT; + 800228e: 2303 movs r3, #3 + 8002290: e1e6 b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + 8002292: 4b53 ldr r3, [pc, #332] ; (80023e0 ) + 8002294: 681b ldr r3, [r3, #0] + 8002296: f403 3300 and.w r3, r3, #131072 ; 0x20000 + 800229a: 2b00 cmp r3, #0 + 800229c: d1f0 bne.n 8002280 + 800229e: e000 b.n 80022a2 + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 80022a0: bf00 nop + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + 80022a2: 687b ldr r3, [r7, #4] + 80022a4: 681b ldr r3, [r3, #0] + 80022a6: f003 0302 and.w r3, r3, #2 + 80022aa: 2b00 cmp r3, #0 + 80022ac: d063 beq.n 8002376 + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + 80022ae: 4b4c ldr r3, [pc, #304] ; (80023e0 ) + 80022b0: 685b ldr r3, [r3, #4] + 80022b2: f003 030c and.w r3, r3, #12 + 80022b6: 2b00 cmp r3, #0 + 80022b8: d00b beq.n 80022d2 + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI_DIV2))) + 80022ba: 4b49 ldr r3, [pc, #292] ; (80023e0 ) + 80022bc: 685b ldr r3, [r3, #4] + 80022be: f003 030c and.w r3, r3, #12 + 80022c2: 2b08 cmp r3, #8 + 80022c4: d11c bne.n 8002300 + 80022c6: 4b46 ldr r3, [pc, #280] ; (80023e0 ) + 80022c8: 685b ldr r3, [r3, #4] + 80022ca: f403 3380 and.w r3, r3, #65536 ; 0x10000 + 80022ce: 2b00 cmp r3, #0 + 80022d0: d116 bne.n 8002300 + { + /* When HSI is used as system clock it will not disabled */ + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + 80022d2: 4b43 ldr r3, [pc, #268] ; (80023e0 ) + 80022d4: 681b ldr r3, [r3, #0] + 80022d6: f003 0302 and.w r3, r3, #2 + 80022da: 2b00 cmp r3, #0 + 80022dc: d005 beq.n 80022ea + 80022de: 687b ldr r3, [r7, #4] + 80022e0: 691b ldr r3, [r3, #16] + 80022e2: 2b01 cmp r3, #1 + 80022e4: d001 beq.n 80022ea + { + return HAL_ERROR; + 80022e6: 2301 movs r3, #1 + 80022e8: e1ba b.n 8002660 + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 80022ea: 4b3d ldr r3, [pc, #244] ; (80023e0 ) + 80022ec: 681b ldr r3, [r3, #0] + 80022ee: f023 02f8 bic.w r2, r3, #248 ; 0xf8 + 80022f2: 687b ldr r3, [r7, #4] + 80022f4: 695b ldr r3, [r3, #20] + 80022f6: 00db lsls r3, r3, #3 + 80022f8: 4939 ldr r1, [pc, #228] ; (80023e0 ) + 80022fa: 4313 orrs r3, r2 + 80022fc: 600b str r3, [r1, #0] + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + 80022fe: e03a b.n 8002376 + } + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + 8002300: 687b ldr r3, [r7, #4] + 8002302: 691b ldr r3, [r3, #16] + 8002304: 2b00 cmp r3, #0 + 8002306: d020 beq.n 800234a + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + 8002308: 4b36 ldr r3, [pc, #216] ; (80023e4 ) + 800230a: 2201 movs r2, #1 + 800230c: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 800230e: f7fe f901 bl 8000514 + 8002312: 6138 str r0, [r7, #16] + + /* Wait till HSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 8002314: e008 b.n 8002328 + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + 8002316: f7fe f8fd bl 8000514 + 800231a: 4602 mov r2, r0 + 800231c: 693b ldr r3, [r7, #16] + 800231e: 1ad3 subs r3, r2, r3 + 8002320: 2b02 cmp r3, #2 + 8002322: d901 bls.n 8002328 + { + return HAL_TIMEOUT; + 8002324: 2303 movs r3, #3 + 8002326: e19b b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 8002328: 4b2d ldr r3, [pc, #180] ; (80023e0 ) + 800232a: 681b ldr r3, [r3, #0] + 800232c: f003 0302 and.w r3, r3, #2 + 8002330: 2b00 cmp r3, #0 + 8002332: d0f0 beq.n 8002316 + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 8002334: 4b2a ldr r3, [pc, #168] ; (80023e0 ) + 8002336: 681b ldr r3, [r3, #0] + 8002338: f023 02f8 bic.w r2, r3, #248 ; 0xf8 + 800233c: 687b ldr r3, [r7, #4] + 800233e: 695b ldr r3, [r3, #20] + 8002340: 00db lsls r3, r3, #3 + 8002342: 4927 ldr r1, [pc, #156] ; (80023e0 ) + 8002344: 4313 orrs r3, r2 + 8002346: 600b str r3, [r1, #0] + 8002348: e015 b.n 8002376 + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + 800234a: 4b26 ldr r3, [pc, #152] ; (80023e4 ) + 800234c: 2200 movs r2, #0 + 800234e: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002350: f7fe f8e0 bl 8000514 + 8002354: 6138 str r0, [r7, #16] + + /* Wait till HSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + 8002356: e008 b.n 800236a + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + 8002358: f7fe f8dc bl 8000514 + 800235c: 4602 mov r2, r0 + 800235e: 693b ldr r3, [r7, #16] + 8002360: 1ad3 subs r3, r2, r3 + 8002362: 2b02 cmp r3, #2 + 8002364: d901 bls.n 800236a + { + return HAL_TIMEOUT; + 8002366: 2303 movs r3, #3 + 8002368: e17a b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + 800236a: 4b1d ldr r3, [pc, #116] ; (80023e0 ) + 800236c: 681b ldr r3, [r3, #0] + 800236e: f003 0302 and.w r3, r3, #2 + 8002372: 2b00 cmp r3, #0 + 8002374: d1f0 bne.n 8002358 + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + 8002376: 687b ldr r3, [r7, #4] + 8002378: 681b ldr r3, [r3, #0] + 800237a: f003 0308 and.w r3, r3, #8 + 800237e: 2b00 cmp r3, #0 + 8002380: d03a beq.n 80023f8 + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + 8002382: 687b ldr r3, [r7, #4] + 8002384: 699b ldr r3, [r3, #24] + 8002386: 2b00 cmp r3, #0 + 8002388: d019 beq.n 80023be + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + 800238a: 4b17 ldr r3, [pc, #92] ; (80023e8 ) + 800238c: 2201 movs r2, #1 + 800238e: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002390: f7fe f8c0 bl 8000514 + 8002394: 6138 str r0, [r7, #16] + + /* Wait till LSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + 8002396: e008 b.n 80023aa + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + 8002398: f7fe f8bc bl 8000514 + 800239c: 4602 mov r2, r0 + 800239e: 693b ldr r3, [r7, #16] + 80023a0: 1ad3 subs r3, r2, r3 + 80023a2: 2b02 cmp r3, #2 + 80023a4: d901 bls.n 80023aa + { + return HAL_TIMEOUT; + 80023a6: 2303 movs r3, #3 + 80023a8: e15a b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + 80023aa: 4b0d ldr r3, [pc, #52] ; (80023e0 ) + 80023ac: 6a5b ldr r3, [r3, #36] ; 0x24 + 80023ae: f003 0302 and.w r3, r3, #2 + 80023b2: 2b00 cmp r3, #0 + 80023b4: d0f0 beq.n 8002398 + } + } + /* To have a fully stabilized clock in the specified range, a software delay of 1ms + should be added.*/ + RCC_Delay(1); + 80023b6: 2001 movs r0, #1 + 80023b8: f000 faa8 bl 800290c + 80023bc: e01c b.n 80023f8 + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + 80023be: 4b0a ldr r3, [pc, #40] ; (80023e8 ) + 80023c0: 2200 movs r2, #0 + 80023c2: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 80023c4: f7fe f8a6 bl 8000514 + 80023c8: 6138 str r0, [r7, #16] + + /* Wait till LSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + 80023ca: e00f b.n 80023ec + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + 80023cc: f7fe f8a2 bl 8000514 + 80023d0: 4602 mov r2, r0 + 80023d2: 693b ldr r3, [r7, #16] + 80023d4: 1ad3 subs r3, r2, r3 + 80023d6: 2b02 cmp r3, #2 + 80023d8: d908 bls.n 80023ec + { + return HAL_TIMEOUT; + 80023da: 2303 movs r3, #3 + 80023dc: e140 b.n 8002660 + 80023de: bf00 nop + 80023e0: 40021000 .word 0x40021000 + 80023e4: 42420000 .word 0x42420000 + 80023e8: 42420480 .word 0x42420480 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + 80023ec: 4b9e ldr r3, [pc, #632] ; (8002668 ) + 80023ee: 6a5b ldr r3, [r3, #36] ; 0x24 + 80023f0: f003 0302 and.w r3, r3, #2 + 80023f4: 2b00 cmp r3, #0 + 80023f6: d1e9 bne.n 80023cc + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + 80023f8: 687b ldr r3, [r7, #4] + 80023fa: 681b ldr r3, [r3, #0] + 80023fc: f003 0304 and.w r3, r3, #4 + 8002400: 2b00 cmp r3, #0 + 8002402: f000 80a6 beq.w 8002552 + { + FlagStatus pwrclkchanged = RESET; + 8002406: 2300 movs r3, #0 + 8002408: 75fb strb r3, [r7, #23] + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + 800240a: 4b97 ldr r3, [pc, #604] ; (8002668 ) + 800240c: 69db ldr r3, [r3, #28] + 800240e: f003 5380 and.w r3, r3, #268435456 ; 0x10000000 + 8002412: 2b00 cmp r3, #0 + 8002414: d10d bne.n 8002432 + { + __HAL_RCC_PWR_CLK_ENABLE(); + 8002416: 4b94 ldr r3, [pc, #592] ; (8002668 ) + 8002418: 69db ldr r3, [r3, #28] + 800241a: 4a93 ldr r2, [pc, #588] ; (8002668 ) + 800241c: f043 5380 orr.w r3, r3, #268435456 ; 0x10000000 + 8002420: 61d3 str r3, [r2, #28] + 8002422: 4b91 ldr r3, [pc, #580] ; (8002668 ) + 8002424: 69db ldr r3, [r3, #28] + 8002426: f003 5380 and.w r3, r3, #268435456 ; 0x10000000 + 800242a: 60bb str r3, [r7, #8] + 800242c: 68bb ldr r3, [r7, #8] + pwrclkchanged = SET; + 800242e: 2301 movs r3, #1 + 8002430: 75fb strb r3, [r7, #23] + } + + if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8002432: 4b8e ldr r3, [pc, #568] ; (800266c ) + 8002434: 681b ldr r3, [r3, #0] + 8002436: f403 7380 and.w r3, r3, #256 ; 0x100 + 800243a: 2b00 cmp r3, #0 + 800243c: d118 bne.n 8002470 + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + 800243e: 4b8b ldr r3, [pc, #556] ; (800266c ) + 8002440: 681b ldr r3, [r3, #0] + 8002442: 4a8a ldr r2, [pc, #552] ; (800266c ) + 8002444: f443 7380 orr.w r3, r3, #256 ; 0x100 + 8002448: 6013 str r3, [r2, #0] + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + 800244a: f7fe f863 bl 8000514 + 800244e: 6138 str r0, [r7, #16] + + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8002450: e008 b.n 8002464 + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + 8002452: f7fe f85f bl 8000514 + 8002456: 4602 mov r2, r0 + 8002458: 693b ldr r3, [r7, #16] + 800245a: 1ad3 subs r3, r2, r3 + 800245c: 2b64 cmp r3, #100 ; 0x64 + 800245e: d901 bls.n 8002464 + { + return HAL_TIMEOUT; + 8002460: 2303 movs r3, #3 + 8002462: e0fd b.n 8002660 + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8002464: 4b81 ldr r3, [pc, #516] ; (800266c ) + 8002466: 681b ldr r3, [r3, #0] + 8002468: f403 7380 and.w r3, r3, #256 ; 0x100 + 800246c: 2b00 cmp r3, #0 + 800246e: d0f0 beq.n 8002452 + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + 8002470: 687b ldr r3, [r7, #4] + 8002472: 68db ldr r3, [r3, #12] + 8002474: 2b01 cmp r3, #1 + 8002476: d106 bne.n 8002486 + 8002478: 4b7b ldr r3, [pc, #492] ; (8002668 ) + 800247a: 6a1b ldr r3, [r3, #32] + 800247c: 4a7a ldr r2, [pc, #488] ; (8002668 ) + 800247e: f043 0301 orr.w r3, r3, #1 + 8002482: 6213 str r3, [r2, #32] + 8002484: e02d b.n 80024e2 + 8002486: 687b ldr r3, [r7, #4] + 8002488: 68db ldr r3, [r3, #12] + 800248a: 2b00 cmp r3, #0 + 800248c: d10c bne.n 80024a8 + 800248e: 4b76 ldr r3, [pc, #472] ; (8002668 ) + 8002490: 6a1b ldr r3, [r3, #32] + 8002492: 4a75 ldr r2, [pc, #468] ; (8002668 ) + 8002494: f023 0301 bic.w r3, r3, #1 + 8002498: 6213 str r3, [r2, #32] + 800249a: 4b73 ldr r3, [pc, #460] ; (8002668 ) + 800249c: 6a1b ldr r3, [r3, #32] + 800249e: 4a72 ldr r2, [pc, #456] ; (8002668 ) + 80024a0: f023 0304 bic.w r3, r3, #4 + 80024a4: 6213 str r3, [r2, #32] + 80024a6: e01c b.n 80024e2 + 80024a8: 687b ldr r3, [r7, #4] + 80024aa: 68db ldr r3, [r3, #12] + 80024ac: 2b05 cmp r3, #5 + 80024ae: d10c bne.n 80024ca + 80024b0: 4b6d ldr r3, [pc, #436] ; (8002668 ) + 80024b2: 6a1b ldr r3, [r3, #32] + 80024b4: 4a6c ldr r2, [pc, #432] ; (8002668 ) + 80024b6: f043 0304 orr.w r3, r3, #4 + 80024ba: 6213 str r3, [r2, #32] + 80024bc: 4b6a ldr r3, [pc, #424] ; (8002668 ) + 80024be: 6a1b ldr r3, [r3, #32] + 80024c0: 4a69 ldr r2, [pc, #420] ; (8002668 ) + 80024c2: f043 0301 orr.w r3, r3, #1 + 80024c6: 6213 str r3, [r2, #32] + 80024c8: e00b b.n 80024e2 + 80024ca: 4b67 ldr r3, [pc, #412] ; (8002668 ) + 80024cc: 6a1b ldr r3, [r3, #32] + 80024ce: 4a66 ldr r2, [pc, #408] ; (8002668 ) + 80024d0: f023 0301 bic.w r3, r3, #1 + 80024d4: 6213 str r3, [r2, #32] + 80024d6: 4b64 ldr r3, [pc, #400] ; (8002668 ) + 80024d8: 6a1b ldr r3, [r3, #32] + 80024da: 4a63 ldr r2, [pc, #396] ; (8002668 ) + 80024dc: f023 0304 bic.w r3, r3, #4 + 80024e0: 6213 str r3, [r2, #32] + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + 80024e2: 687b ldr r3, [r7, #4] + 80024e4: 68db ldr r3, [r3, #12] + 80024e6: 2b00 cmp r3, #0 + 80024e8: d015 beq.n 8002516 + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 80024ea: f7fe f813 bl 8000514 + 80024ee: 6138 str r0, [r7, #16] + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 80024f0: e00a b.n 8002508 + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + 80024f2: f7fe f80f bl 8000514 + 80024f6: 4602 mov r2, r0 + 80024f8: 693b ldr r3, [r7, #16] + 80024fa: 1ad3 subs r3, r2, r3 + 80024fc: f241 3288 movw r2, #5000 ; 0x1388 + 8002500: 4293 cmp r3, r2 + 8002502: d901 bls.n 8002508 + { + return HAL_TIMEOUT; + 8002504: 2303 movs r3, #3 + 8002506: e0ab b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 8002508: 4b57 ldr r3, [pc, #348] ; (8002668 ) + 800250a: 6a1b ldr r3, [r3, #32] + 800250c: f003 0302 and.w r3, r3, #2 + 8002510: 2b00 cmp r3, #0 + 8002512: d0ee beq.n 80024f2 + 8002514: e014 b.n 8002540 + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002516: f7fd fffd bl 8000514 + 800251a: 6138 str r0, [r7, #16] + + /* Wait till LSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + 800251c: e00a b.n 8002534 + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + 800251e: f7fd fff9 bl 8000514 + 8002522: 4602 mov r2, r0 + 8002524: 693b ldr r3, [r7, #16] + 8002526: 1ad3 subs r3, r2, r3 + 8002528: f241 3288 movw r2, #5000 ; 0x1388 + 800252c: 4293 cmp r3, r2 + 800252e: d901 bls.n 8002534 + { + return HAL_TIMEOUT; + 8002530: 2303 movs r3, #3 + 8002532: e095 b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + 8002534: 4b4c ldr r3, [pc, #304] ; (8002668 ) + 8002536: 6a1b ldr r3, [r3, #32] + 8002538: f003 0302 and.w r3, r3, #2 + 800253c: 2b00 cmp r3, #0 + 800253e: d1ee bne.n 800251e + } + } + } + + /* Require to disable power clock if necessary */ + if (pwrclkchanged == SET) + 8002540: 7dfb ldrb r3, [r7, #23] + 8002542: 2b01 cmp r3, #1 + 8002544: d105 bne.n 8002552 + { + __HAL_RCC_PWR_CLK_DISABLE(); + 8002546: 4b48 ldr r3, [pc, #288] ; (8002668 ) + 8002548: 69db ldr r3, [r3, #28] + 800254a: 4a47 ldr r2, [pc, #284] ; (8002668 ) + 800254c: f023 5380 bic.w r3, r3, #268435456 ; 0x10000000 + 8002550: 61d3 str r3, [r2, #28] + +#endif /* RCC_CR_PLL2ON */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + 8002552: 687b ldr r3, [r7, #4] + 8002554: 69db ldr r3, [r3, #28] + 8002556: 2b00 cmp r3, #0 + 8002558: f000 8081 beq.w 800265e + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + 800255c: 4b42 ldr r3, [pc, #264] ; (8002668 ) + 800255e: 685b ldr r3, [r3, #4] + 8002560: f003 030c and.w r3, r3, #12 + 8002564: 2b08 cmp r3, #8 + 8002566: d061 beq.n 800262c + { + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + 8002568: 687b ldr r3, [r7, #4] + 800256a: 69db ldr r3, [r3, #28] + 800256c: 2b02 cmp r3, #2 + 800256e: d146 bne.n 80025fe + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 8002570: 4b3f ldr r3, [pc, #252] ; (8002670 ) + 8002572: 2200 movs r2, #0 + 8002574: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002576: f7fd ffcd bl 8000514 + 800257a: 6138 str r0, [r7, #16] + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 800257c: e008 b.n 8002590 + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + 800257e: f7fd ffc9 bl 8000514 + 8002582: 4602 mov r2, r0 + 8002584: 693b ldr r3, [r7, #16] + 8002586: 1ad3 subs r3, r2, r3 + 8002588: 2b02 cmp r3, #2 + 800258a: d901 bls.n 8002590 + { + return HAL_TIMEOUT; + 800258c: 2303 movs r3, #3 + 800258e: e067 b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 8002590: 4b35 ldr r3, [pc, #212] ; (8002668 ) + 8002592: 681b ldr r3, [r3, #0] + 8002594: f003 7300 and.w r3, r3, #33554432 ; 0x2000000 + 8002598: 2b00 cmp r3, #0 + 800259a: d1f0 bne.n 800257e + } + } + + /* Configure the HSE prediv factor --------------------------------*/ + /* It can be written only when the PLL is disabled. Not used in PLL source is different than HSE */ + if (RCC_OscInitStruct->PLL.PLLSource == RCC_PLLSOURCE_HSE) + 800259c: 687b ldr r3, [r7, #4] + 800259e: 6a1b ldr r3, [r3, #32] + 80025a0: f5b3 3f80 cmp.w r3, #65536 ; 0x10000 + 80025a4: d108 bne.n 80025b8 + /* Set PREDIV1 source */ + SET_BIT(RCC->CFGR2, RCC_OscInitStruct->Prediv1Source); +#endif /* RCC_CFGR2_PREDIV1SRC */ + + /* Set PREDIV1 Value */ + __HAL_RCC_HSE_PREDIV_CONFIG(RCC_OscInitStruct->HSEPredivValue); + 80025a6: 4b30 ldr r3, [pc, #192] ; (8002668 ) + 80025a8: 685b ldr r3, [r3, #4] + 80025aa: f423 3200 bic.w r2, r3, #131072 ; 0x20000 + 80025ae: 687b ldr r3, [r7, #4] + 80025b0: 689b ldr r3, [r3, #8] + 80025b2: 492d ldr r1, [pc, #180] ; (8002668 ) + 80025b4: 4313 orrs r3, r2 + 80025b6: 604b str r3, [r1, #4] + } + + /* Configure the main PLL clock source and multiplication factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + 80025b8: 4b2b ldr r3, [pc, #172] ; (8002668 ) + 80025ba: 685b ldr r3, [r3, #4] + 80025bc: f423 1274 bic.w r2, r3, #3997696 ; 0x3d0000 + 80025c0: 687b ldr r3, [r7, #4] + 80025c2: 6a19 ldr r1, [r3, #32] + 80025c4: 687b ldr r3, [r7, #4] + 80025c6: 6a5b ldr r3, [r3, #36] ; 0x24 + 80025c8: 430b orrs r3, r1 + 80025ca: 4927 ldr r1, [pc, #156] ; (8002668 ) + 80025cc: 4313 orrs r3, r2 + 80025ce: 604b str r3, [r1, #4] + RCC_OscInitStruct->PLL.PLLMUL); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + 80025d0: 4b27 ldr r3, [pc, #156] ; (8002670 ) + 80025d2: 2201 movs r2, #1 + 80025d4: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 80025d6: f7fd ff9d bl 8000514 + 80025da: 6138 str r0, [r7, #16] + + /* Wait till PLL is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 80025dc: e008 b.n 80025f0 + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + 80025de: f7fd ff99 bl 8000514 + 80025e2: 4602 mov r2, r0 + 80025e4: 693b ldr r3, [r7, #16] + 80025e6: 1ad3 subs r3, r2, r3 + 80025e8: 2b02 cmp r3, #2 + 80025ea: d901 bls.n 80025f0 + { + return HAL_TIMEOUT; + 80025ec: 2303 movs r3, #3 + 80025ee: e037 b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 80025f0: 4b1d ldr r3, [pc, #116] ; (8002668 ) + 80025f2: 681b ldr r3, [r3, #0] + 80025f4: f003 7300 and.w r3, r3, #33554432 ; 0x2000000 + 80025f8: 2b00 cmp r3, #0 + 80025fa: d0f0 beq.n 80025de + 80025fc: e02f b.n 800265e + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 80025fe: 4b1c ldr r3, [pc, #112] ; (8002670 ) + 8002600: 2200 movs r2, #0 + 8002602: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002604: f7fd ff86 bl 8000514 + 8002608: 6138 str r0, [r7, #16] + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 800260a: e008 b.n 800261e + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + 800260c: f7fd ff82 bl 8000514 + 8002610: 4602 mov r2, r0 + 8002612: 693b ldr r3, [r7, #16] + 8002614: 1ad3 subs r3, r2, r3 + 8002616: 2b02 cmp r3, #2 + 8002618: d901 bls.n 800261e + { + return HAL_TIMEOUT; + 800261a: 2303 movs r3, #3 + 800261c: e020 b.n 8002660 + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 800261e: 4b12 ldr r3, [pc, #72] ; (8002668 ) + 8002620: 681b ldr r3, [r3, #0] + 8002622: f003 7300 and.w r3, r3, #33554432 ; 0x2000000 + 8002626: 2b00 cmp r3, #0 + 8002628: d1f0 bne.n 800260c + 800262a: e018 b.n 800265e + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + 800262c: 687b ldr r3, [r7, #4] + 800262e: 69db ldr r3, [r3, #28] + 8002630: 2b01 cmp r3, #1 + 8002632: d101 bne.n 8002638 + { + return HAL_ERROR; + 8002634: 2301 movs r3, #1 + 8002636: e013 b.n 8002660 + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->CFGR; + 8002638: 4b0b ldr r3, [pc, #44] ; (8002668 ) + 800263a: 685b ldr r3, [r3, #4] + 800263c: 60fb str r3, [r7, #12] + if ((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 800263e: 68fb ldr r3, [r7, #12] + 8002640: f403 3280 and.w r2, r3, #65536 ; 0x10000 + 8002644: 687b ldr r3, [r7, #4] + 8002646: 6a1b ldr r3, [r3, #32] + 8002648: 429a cmp r2, r3 + 800264a: d106 bne.n 800265a + (READ_BIT(pll_config, RCC_CFGR_PLLMULL) != RCC_OscInitStruct->PLL.PLLMUL)) + 800264c: 68fb ldr r3, [r7, #12] + 800264e: f403 1270 and.w r2, r3, #3932160 ; 0x3c0000 + 8002652: 687b ldr r3, [r7, #4] + 8002654: 6a5b ldr r3, [r3, #36] ; 0x24 + if ((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 8002656: 429a cmp r2, r3 + 8002658: d001 beq.n 800265e + { + return HAL_ERROR; + 800265a: 2301 movs r3, #1 + 800265c: e000 b.n 8002660 + } + } + } + } + + return HAL_OK; + 800265e: 2300 movs r3, #0 +} + 8002660: 4618 mov r0, r3 + 8002662: 3718 adds r7, #24 + 8002664: 46bd mov sp, r7 + 8002666: bd80 pop {r7, pc} + 8002668: 40021000 .word 0x40021000 + 800266c: 40007000 .word 0x40007000 + 8002670: 42420060 .word 0x42420060 + +08002674 : + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + 8002674: b580 push {r7, lr} + 8002676: b084 sub sp, #16 + 8002678: af00 add r7, sp, #0 + 800267a: 6078 str r0, [r7, #4] + 800267c: 6039 str r1, [r7, #0] + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + 800267e: 687b ldr r3, [r7, #4] + 8002680: 2b00 cmp r3, #0 + 8002682: d101 bne.n 8002688 + { + return HAL_ERROR; + 8002684: 2301 movs r3, #1 + 8002686: e0d0 b.n 800282a + must be correctly programmed according to the frequency of the CPU clock + (HCLK) of the device. */ + +#if defined(FLASH_ACR_LATENCY) + /* Increasing the number of wait states because of higher CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + 8002688: 4b6a ldr r3, [pc, #424] ; (8002834 ) + 800268a: 681b ldr r3, [r3, #0] + 800268c: f003 0307 and.w r3, r3, #7 + 8002690: 683a ldr r2, [r7, #0] + 8002692: 429a cmp r2, r3 + 8002694: d910 bls.n 80026b8 + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 8002696: 4b67 ldr r3, [pc, #412] ; (8002834 ) + 8002698: 681b ldr r3, [r3, #0] + 800269a: f023 0207 bic.w r2, r3, #7 + 800269e: 4965 ldr r1, [pc, #404] ; (8002834 ) + 80026a0: 683b ldr r3, [r7, #0] + 80026a2: 4313 orrs r3, r2 + 80026a4: 600b str r3, [r1, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + 80026a6: 4b63 ldr r3, [pc, #396] ; (8002834 ) + 80026a8: 681b ldr r3, [r3, #0] + 80026aa: f003 0307 and.w r3, r3, #7 + 80026ae: 683a ldr r2, [r7, #0] + 80026b0: 429a cmp r2, r3 + 80026b2: d001 beq.n 80026b8 + { + return HAL_ERROR; + 80026b4: 2301 movs r3, #1 + 80026b6: e0b8 b.n 800282a + } +} + +#endif /* FLASH_ACR_LATENCY */ +/*-------------------------- HCLK Configuration --------------------------*/ +if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + 80026b8: 687b ldr r3, [r7, #4] + 80026ba: 681b ldr r3, [r3, #0] + 80026bc: f003 0302 and.w r3, r3, #2 + 80026c0: 2b00 cmp r3, #0 + 80026c2: d020 beq.n 8002706 + { + /* Set the highest APBx dividers in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + 80026c4: 687b ldr r3, [r7, #4] + 80026c6: 681b ldr r3, [r3, #0] + 80026c8: f003 0304 and.w r3, r3, #4 + 80026cc: 2b00 cmp r3, #0 + 80026ce: d005 beq.n 80026dc + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); + 80026d0: 4b59 ldr r3, [pc, #356] ; (8002838 ) + 80026d2: 685b ldr r3, [r3, #4] + 80026d4: 4a58 ldr r2, [pc, #352] ; (8002838 ) + 80026d6: f443 63e0 orr.w r3, r3, #1792 ; 0x700 + 80026da: 6053 str r3, [r2, #4] + } + + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + 80026dc: 687b ldr r3, [r7, #4] + 80026de: 681b ldr r3, [r3, #0] + 80026e0: f003 0308 and.w r3, r3, #8 + 80026e4: 2b00 cmp r3, #0 + 80026e6: d005 beq.n 80026f4 + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); + 80026e8: 4b53 ldr r3, [pc, #332] ; (8002838 ) + 80026ea: 685b ldr r3, [r3, #4] + 80026ec: 4a52 ldr r2, [pc, #328] ; (8002838 ) + 80026ee: f443 5360 orr.w r3, r3, #14336 ; 0x3800 + 80026f2: 6053 str r3, [r2, #4] + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + 80026f4: 4b50 ldr r3, [pc, #320] ; (8002838 ) + 80026f6: 685b ldr r3, [r3, #4] + 80026f8: f023 02f0 bic.w r2, r3, #240 ; 0xf0 + 80026fc: 687b ldr r3, [r7, #4] + 80026fe: 689b ldr r3, [r3, #8] + 8002700: 494d ldr r1, [pc, #308] ; (8002838 ) + 8002702: 4313 orrs r3, r2 + 8002704: 604b str r3, [r1, #4] + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + 8002706: 687b ldr r3, [r7, #4] + 8002708: 681b ldr r3, [r3, #0] + 800270a: f003 0301 and.w r3, r3, #1 + 800270e: 2b00 cmp r3, #0 + 8002710: d040 beq.n 8002794 + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + 8002712: 687b ldr r3, [r7, #4] + 8002714: 685b ldr r3, [r3, #4] + 8002716: 2b01 cmp r3, #1 + 8002718: d107 bne.n 800272a + { + /* Check the HSE ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 800271a: 4b47 ldr r3, [pc, #284] ; (8002838 ) + 800271c: 681b ldr r3, [r3, #0] + 800271e: f403 3300 and.w r3, r3, #131072 ; 0x20000 + 8002722: 2b00 cmp r3, #0 + 8002724: d115 bne.n 8002752 + { + return HAL_ERROR; + 8002726: 2301 movs r3, #1 + 8002728: e07f b.n 800282a + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + 800272a: 687b ldr r3, [r7, #4] + 800272c: 685b ldr r3, [r3, #4] + 800272e: 2b02 cmp r3, #2 + 8002730: d107 bne.n 8002742 + { + /* Check the PLL ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 8002732: 4b41 ldr r3, [pc, #260] ; (8002838 ) + 8002734: 681b ldr r3, [r3, #0] + 8002736: f003 7300 and.w r3, r3, #33554432 ; 0x2000000 + 800273a: 2b00 cmp r3, #0 + 800273c: d109 bne.n 8002752 + { + return HAL_ERROR; + 800273e: 2301 movs r3, #1 + 8002740: e073 b.n 800282a + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 8002742: 4b3d ldr r3, [pc, #244] ; (8002838 ) + 8002744: 681b ldr r3, [r3, #0] + 8002746: f003 0302 and.w r3, r3, #2 + 800274a: 2b00 cmp r3, #0 + 800274c: d101 bne.n 8002752 + { + return HAL_ERROR; + 800274e: 2301 movs r3, #1 + 8002750: e06b b.n 800282a + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + 8002752: 4b39 ldr r3, [pc, #228] ; (8002838 ) + 8002754: 685b ldr r3, [r3, #4] + 8002756: f023 0203 bic.w r2, r3, #3 + 800275a: 687b ldr r3, [r7, #4] + 800275c: 685b ldr r3, [r3, #4] + 800275e: 4936 ldr r1, [pc, #216] ; (8002838 ) + 8002760: 4313 orrs r3, r2 + 8002762: 604b str r3, [r1, #4] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002764: f7fd fed6 bl 8000514 + 8002768: 60f8 str r0, [r7, #12] + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 800276a: e00a b.n 8002782 + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + 800276c: f7fd fed2 bl 8000514 + 8002770: 4602 mov r2, r0 + 8002772: 68fb ldr r3, [r7, #12] + 8002774: 1ad3 subs r3, r2, r3 + 8002776: f241 3288 movw r2, #5000 ; 0x1388 + 800277a: 4293 cmp r3, r2 + 800277c: d901 bls.n 8002782 + { + return HAL_TIMEOUT; + 800277e: 2303 movs r3, #3 + 8002780: e053 b.n 800282a + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 8002782: 4b2d ldr r3, [pc, #180] ; (8002838 ) + 8002784: 685b ldr r3, [r3, #4] + 8002786: f003 020c and.w r2, r3, #12 + 800278a: 687b ldr r3, [r7, #4] + 800278c: 685b ldr r3, [r3, #4] + 800278e: 009b lsls r3, r3, #2 + 8002790: 429a cmp r2, r3 + 8002792: d1eb bne.n 800276c + } + } + +#if defined(FLASH_ACR_LATENCY) + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + 8002794: 4b27 ldr r3, [pc, #156] ; (8002834 ) + 8002796: 681b ldr r3, [r3, #0] + 8002798: f003 0307 and.w r3, r3, #7 + 800279c: 683a ldr r2, [r7, #0] + 800279e: 429a cmp r2, r3 + 80027a0: d210 bcs.n 80027c4 + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 80027a2: 4b24 ldr r3, [pc, #144] ; (8002834 ) + 80027a4: 681b ldr r3, [r3, #0] + 80027a6: f023 0207 bic.w r2, r3, #7 + 80027aa: 4922 ldr r1, [pc, #136] ; (8002834 ) + 80027ac: 683b ldr r3, [r7, #0] + 80027ae: 4313 orrs r3, r2 + 80027b0: 600b str r3, [r1, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + 80027b2: 4b20 ldr r3, [pc, #128] ; (8002834 ) + 80027b4: 681b ldr r3, [r3, #0] + 80027b6: f003 0307 and.w r3, r3, #7 + 80027ba: 683a ldr r2, [r7, #0] + 80027bc: 429a cmp r2, r3 + 80027be: d001 beq.n 80027c4 + { + return HAL_ERROR; + 80027c0: 2301 movs r3, #1 + 80027c2: e032 b.n 800282a + } +} +#endif /* FLASH_ACR_LATENCY */ + +/*-------------------------- PCLK1 Configuration ---------------------------*/ +if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + 80027c4: 687b ldr r3, [r7, #4] + 80027c6: 681b ldr r3, [r3, #0] + 80027c8: f003 0304 and.w r3, r3, #4 + 80027cc: 2b00 cmp r3, #0 + 80027ce: d008 beq.n 80027e2 + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + 80027d0: 4b19 ldr r3, [pc, #100] ; (8002838 ) + 80027d2: 685b ldr r3, [r3, #4] + 80027d4: f423 62e0 bic.w r2, r3, #1792 ; 0x700 + 80027d8: 687b ldr r3, [r7, #4] + 80027da: 68db ldr r3, [r3, #12] + 80027dc: 4916 ldr r1, [pc, #88] ; (8002838 ) + 80027de: 4313 orrs r3, r2 + 80027e0: 604b str r3, [r1, #4] + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + 80027e2: 687b ldr r3, [r7, #4] + 80027e4: 681b ldr r3, [r3, #0] + 80027e6: f003 0308 and.w r3, r3, #8 + 80027ea: 2b00 cmp r3, #0 + 80027ec: d009 beq.n 8002802 + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3)); + 80027ee: 4b12 ldr r3, [pc, #72] ; (8002838 ) + 80027f0: 685b ldr r3, [r3, #4] + 80027f2: f423 5260 bic.w r2, r3, #14336 ; 0x3800 + 80027f6: 687b ldr r3, [r7, #4] + 80027f8: 691b ldr r3, [r3, #16] + 80027fa: 00db lsls r3, r3, #3 + 80027fc: 490e ldr r1, [pc, #56] ; (8002838 ) + 80027fe: 4313 orrs r3, r2 + 8002800: 604b str r3, [r1, #4] + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]; + 8002802: f000 f821 bl 8002848 + 8002806: 4601 mov r1, r0 + 8002808: 4b0b ldr r3, [pc, #44] ; (8002838 ) + 800280a: 685b ldr r3, [r3, #4] + 800280c: 091b lsrs r3, r3, #4 + 800280e: f003 030f and.w r3, r3, #15 + 8002812: 4a0a ldr r2, [pc, #40] ; (800283c ) + 8002814: 5cd3 ldrb r3, [r2, r3] + 8002816: fa21 f303 lsr.w r3, r1, r3 + 800281a: 4a09 ldr r2, [pc, #36] ; (8002840 ) + 800281c: 6013 str r3, [r2, #0] + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick(uwTickPrio); + 800281e: 4b09 ldr r3, [pc, #36] ; (8002844 ) + 8002820: 681b ldr r3, [r3, #0] + 8002822: 4618 mov r0, r3 + 8002824: f7fd fe34 bl 8000490 + + return HAL_OK; + 8002828: 2300 movs r3, #0 +} + 800282a: 4618 mov r0, r3 + 800282c: 3710 adds r7, #16 + 800282e: 46bd mov sp, r7 + 8002830: bd80 pop {r7, pc} + 8002832: bf00 nop + 8002834: 40022000 .word 0x40022000 + 8002838: 40021000 .word 0x40021000 + 800283c: 08006cf4 .word 0x08006cf4 + 8002840: 20000000 .word 0x20000000 + 8002844: 20000004 .word 0x20000004 + +08002848 : + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + 8002848: b490 push {r4, r7} + 800284a: b08a sub sp, #40 ; 0x28 + 800284c: af00 add r7, sp, #0 +#if defined(RCC_CFGR2_PREDIV1SRC) + const uint8_t aPLLMULFactorTable[14] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 13}; + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; +#else + const uint8_t aPLLMULFactorTable[16] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16}; + 800284e: 4b2a ldr r3, [pc, #168] ; (80028f8 ) + 8002850: 1d3c adds r4, r7, #4 + 8002852: cb0f ldmia r3, {r0, r1, r2, r3} + 8002854: e884 000f stmia.w r4, {r0, r1, r2, r3} +#if defined(RCC_CFGR2_PREDIV1) + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; +#else + const uint8_t aPredivFactorTable[2] = {1, 2}; + 8002858: 4b28 ldr r3, [pc, #160] ; (80028fc ) + 800285a: 881b ldrh r3, [r3, #0] + 800285c: 803b strh r3, [r7, #0] +#endif /*RCC_CFGR2_PREDIV1*/ + +#endif + uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; + 800285e: 2300 movs r3, #0 + 8002860: 61fb str r3, [r7, #28] + 8002862: 2300 movs r3, #0 + 8002864: 61bb str r3, [r7, #24] + 8002866: 2300 movs r3, #0 + 8002868: 627b str r3, [r7, #36] ; 0x24 + 800286a: 2300 movs r3, #0 + 800286c: 617b str r3, [r7, #20] + uint32_t sysclockfreq = 0U; + 800286e: 2300 movs r3, #0 + 8002870: 623b str r3, [r7, #32] +#if defined(RCC_CFGR2_PREDIV1SRC) + uint32_t prediv2 = 0U, pll2mul = 0U; +#endif /*RCC_CFGR2_PREDIV1SRC*/ + + tmpreg = RCC->CFGR; + 8002872: 4b23 ldr r3, [pc, #140] ; (8002900 ) + 8002874: 685b ldr r3, [r3, #4] + 8002876: 61fb str r3, [r7, #28] + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + 8002878: 69fb ldr r3, [r7, #28] + 800287a: f003 030c and.w r3, r3, #12 + 800287e: 2b04 cmp r3, #4 + 8002880: d002 beq.n 8002888 + 8002882: 2b08 cmp r3, #8 + 8002884: d003 beq.n 800288e + 8002886: e02d b.n 80028e4 + { + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + 8002888: 4b1e ldr r3, [pc, #120] ; (8002904 ) + 800288a: 623b str r3, [r7, #32] + break; + 800288c: e02d b.n 80028ea + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos]; + 800288e: 69fb ldr r3, [r7, #28] + 8002890: 0c9b lsrs r3, r3, #18 + 8002892: f003 030f and.w r3, r3, #15 + 8002896: f107 0228 add.w r2, r7, #40 ; 0x28 + 800289a: 4413 add r3, r2 + 800289c: f813 3c24 ldrb.w r3, [r3, #-36] + 80028a0: 617b str r3, [r7, #20] + if ((tmpreg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) + 80028a2: 69fb ldr r3, [r7, #28] + 80028a4: f403 3380 and.w r3, r3, #65536 ; 0x10000 + 80028a8: 2b00 cmp r3, #0 + 80028aa: d013 beq.n 80028d4 + { +#if defined(RCC_CFGR2_PREDIV1) + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> RCC_CFGR2_PREDIV1_Pos]; +#else + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos]; + 80028ac: 4b14 ldr r3, [pc, #80] ; (8002900 ) + 80028ae: 685b ldr r3, [r3, #4] + 80028b0: 0c5b lsrs r3, r3, #17 + 80028b2: f003 0301 and.w r3, r3, #1 + 80028b6: f107 0228 add.w r2, r7, #40 ; 0x28 + 80028ba: 4413 add r3, r2 + 80028bc: f813 3c28 ldrb.w r3, [r3, #-40] + 80028c0: 61bb str r3, [r7, #24] + { + pllclk = pllclk / 2; + } +#else + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE * pllmul) / prediv); + 80028c2: 697b ldr r3, [r7, #20] + 80028c4: 4a0f ldr r2, [pc, #60] ; (8002904 ) + 80028c6: fb02 f203 mul.w r2, r2, r3 + 80028ca: 69bb ldr r3, [r7, #24] + 80028cc: fbb2 f3f3 udiv r3, r2, r3 + 80028d0: 627b str r3, [r7, #36] ; 0x24 + 80028d2: e004 b.n 80028de +#endif /*RCC_CFGR2_PREDIV1SRC*/ + } + else + { + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul); + 80028d4: 697b ldr r3, [r7, #20] + 80028d6: 4a0c ldr r2, [pc, #48] ; (8002908 ) + 80028d8: fb02 f303 mul.w r3, r2, r3 + 80028dc: 627b str r3, [r7, #36] ; 0x24 + } + sysclockfreq = pllclk; + 80028de: 6a7b ldr r3, [r7, #36] ; 0x24 + 80028e0: 623b str r3, [r7, #32] + break; + 80028e2: e002 b.n 80028ea + } + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: /* HSI used as system clock */ + { + sysclockfreq = HSI_VALUE; + 80028e4: 4b07 ldr r3, [pc, #28] ; (8002904 ) + 80028e6: 623b str r3, [r7, #32] + break; + 80028e8: bf00 nop + } + } + return sysclockfreq; + 80028ea: 6a3b ldr r3, [r7, #32] +} + 80028ec: 4618 mov r0, r3 + 80028ee: 3728 adds r7, #40 ; 0x28 + 80028f0: 46bd mov sp, r7 + 80028f2: bc90 pop {r4, r7} + 80028f4: 4770 bx lr + 80028f6: bf00 nop + 80028f8: 08006c98 .word 0x08006c98 + 80028fc: 08006ca8 .word 0x08006ca8 + 8002900: 40021000 .word 0x40021000 + 8002904: 007a1200 .word 0x007a1200 + 8002908: 003d0900 .word 0x003d0900 + +0800290c : + * @brief This function provides delay (in milliseconds) based on CPU cycles method. + * @param mdelay: specifies the delay time length, in milliseconds. + * @retval None + */ +static void RCC_Delay(uint32_t mdelay) +{ + 800290c: b480 push {r7} + 800290e: b085 sub sp, #20 + 8002910: af00 add r7, sp, #0 + 8002912: 6078 str r0, [r7, #4] + __IO uint32_t Delay = mdelay * (SystemCoreClock / 8U / 1000U); + 8002914: 4b0a ldr r3, [pc, #40] ; (8002940 ) + 8002916: 681b ldr r3, [r3, #0] + 8002918: 4a0a ldr r2, [pc, #40] ; (8002944 ) + 800291a: fba2 2303 umull r2, r3, r2, r3 + 800291e: 0a5b lsrs r3, r3, #9 + 8002920: 687a ldr r2, [r7, #4] + 8002922: fb02 f303 mul.w r3, r2, r3 + 8002926: 60fb str r3, [r7, #12] + do + { + __NOP(); + 8002928: bf00 nop + } + while (Delay --); + 800292a: 68fb ldr r3, [r7, #12] + 800292c: 1e5a subs r2, r3, #1 + 800292e: 60fa str r2, [r7, #12] + 8002930: 2b00 cmp r3, #0 + 8002932: d1f9 bne.n 8002928 +} + 8002934: bf00 nop + 8002936: 3714 adds r7, #20 + 8002938: 46bd mov sp, r7 + 800293a: bc80 pop {r7} + 800293c: 4770 bx lr + 800293e: bf00 nop + 8002940: 20000000 .word 0x20000000 + 8002944: 10624dd3 .word 0x10624dd3 + +08002948 : + * manually disable it. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + 8002948: b580 push {r7, lr} + 800294a: b086 sub sp, #24 + 800294c: af00 add r7, sp, #0 + 800294e: 6078 str r0, [r7, #4] + uint32_t tickstart = 0U, temp_reg = 0U; + 8002950: 2300 movs r3, #0 + 8002952: 613b str r3, [r7, #16] + 8002954: 2300 movs r3, #0 + 8002956: 60fb str r3, [r7, #12] + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*------------------------------- RTC/LCD Configuration ------------------------*/ + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) + 8002958: 687b ldr r3, [r7, #4] + 800295a: 681b ldr r3, [r3, #0] + 800295c: f003 0301 and.w r3, r3, #1 + 8002960: 2b00 cmp r3, #0 + 8002962: d07d beq.n 8002a60 + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + FlagStatus pwrclkchanged = RESET; + 8002964: 2300 movs r3, #0 + 8002966: 75fb strb r3, [r7, #23] + + /* As soon as function is called to change RTC clock source, activation of the + power domain is done. */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + 8002968: 4b4f ldr r3, [pc, #316] ; (8002aa8 ) + 800296a: 69db ldr r3, [r3, #28] + 800296c: f003 5380 and.w r3, r3, #268435456 ; 0x10000000 + 8002970: 2b00 cmp r3, #0 + 8002972: d10d bne.n 8002990 + { + __HAL_RCC_PWR_CLK_ENABLE(); + 8002974: 4b4c ldr r3, [pc, #304] ; (8002aa8 ) + 8002976: 69db ldr r3, [r3, #28] + 8002978: 4a4b ldr r2, [pc, #300] ; (8002aa8 ) + 800297a: f043 5380 orr.w r3, r3, #268435456 ; 0x10000000 + 800297e: 61d3 str r3, [r2, #28] + 8002980: 4b49 ldr r3, [pc, #292] ; (8002aa8 ) + 8002982: 69db ldr r3, [r3, #28] + 8002984: f003 5380 and.w r3, r3, #268435456 ; 0x10000000 + 8002988: 60bb str r3, [r7, #8] + 800298a: 68bb ldr r3, [r7, #8] + pwrclkchanged = SET; + 800298c: 2301 movs r3, #1 + 800298e: 75fb strb r3, [r7, #23] + } + + if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8002990: 4b46 ldr r3, [pc, #280] ; (8002aac ) + 8002992: 681b ldr r3, [r3, #0] + 8002994: f403 7380 and.w r3, r3, #256 ; 0x100 + 8002998: 2b00 cmp r3, #0 + 800299a: d118 bne.n 80029ce + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + 800299c: 4b43 ldr r3, [pc, #268] ; (8002aac ) + 800299e: 681b ldr r3, [r3, #0] + 80029a0: 4a42 ldr r2, [pc, #264] ; (8002aac ) + 80029a2: f443 7380 orr.w r3, r3, #256 ; 0x100 + 80029a6: 6013 str r3, [r2, #0] + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + 80029a8: f7fd fdb4 bl 8000514 + 80029ac: 6138 str r0, [r7, #16] + + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 80029ae: e008 b.n 80029c2 + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + 80029b0: f7fd fdb0 bl 8000514 + 80029b4: 4602 mov r2, r0 + 80029b6: 693b ldr r3, [r7, #16] + 80029b8: 1ad3 subs r3, r2, r3 + 80029ba: 2b64 cmp r3, #100 ; 0x64 + 80029bc: d901 bls.n 80029c2 + { + return HAL_TIMEOUT; + 80029be: 2303 movs r3, #3 + 80029c0: e06d b.n 8002a9e + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 80029c2: 4b3a ldr r3, [pc, #232] ; (8002aac ) + 80029c4: 681b ldr r3, [r3, #0] + 80029c6: f403 7380 and.w r3, r3, #256 ; 0x100 + 80029ca: 2b00 cmp r3, #0 + 80029cc: d0f0 beq.n 80029b0 + } + } + } + + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL); + 80029ce: 4b36 ldr r3, [pc, #216] ; (8002aa8 ) + 80029d0: 6a1b ldr r3, [r3, #32] + 80029d2: f403 7340 and.w r3, r3, #768 ; 0x300 + 80029d6: 60fb str r3, [r7, #12] + if ((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + 80029d8: 68fb ldr r3, [r7, #12] + 80029da: 2b00 cmp r3, #0 + 80029dc: d02e beq.n 8002a3c + 80029de: 687b ldr r3, [r7, #4] + 80029e0: 685b ldr r3, [r3, #4] + 80029e2: f403 7340 and.w r3, r3, #768 ; 0x300 + 80029e6: 68fa ldr r2, [r7, #12] + 80029e8: 429a cmp r2, r3 + 80029ea: d027 beq.n 8002a3c + { + /* Store the content of BDCR register before the reset of Backup Domain */ + temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + 80029ec: 4b2e ldr r3, [pc, #184] ; (8002aa8 ) + 80029ee: 6a1b ldr r3, [r3, #32] + 80029f0: f423 7340 bic.w r3, r3, #768 ; 0x300 + 80029f4: 60fb str r3, [r7, #12] + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + 80029f6: 4b2e ldr r3, [pc, #184] ; (8002ab0 ) + 80029f8: 2201 movs r2, #1 + 80029fa: 601a str r2, [r3, #0] + __HAL_RCC_BACKUPRESET_RELEASE(); + 80029fc: 4b2c ldr r3, [pc, #176] ; (8002ab0 ) + 80029fe: 2200 movs r2, #0 + 8002a00: 601a str r2, [r3, #0] + /* Restore the Content of BDCR register */ + RCC->BDCR = temp_reg; + 8002a02: 4a29 ldr r2, [pc, #164] ; (8002aa8 ) + 8002a04: 68fb ldr r3, [r7, #12] + 8002a06: 6213 str r3, [r2, #32] + + /* Wait for LSERDY if LSE was enabled */ + if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON)) + 8002a08: 68fb ldr r3, [r7, #12] + 8002a0a: f003 0301 and.w r3, r3, #1 + 8002a0e: 2b00 cmp r3, #0 + 8002a10: d014 beq.n 8002a3c + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002a12: f7fd fd7f bl 8000514 + 8002a16: 6138 str r0, [r7, #16] + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 8002a18: e00a b.n 8002a30 + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + 8002a1a: f7fd fd7b bl 8000514 + 8002a1e: 4602 mov r2, r0 + 8002a20: 693b ldr r3, [r7, #16] + 8002a22: 1ad3 subs r3, r2, r3 + 8002a24: f241 3288 movw r2, #5000 ; 0x1388 + 8002a28: 4293 cmp r3, r2 + 8002a2a: d901 bls.n 8002a30 + { + return HAL_TIMEOUT; + 8002a2c: 2303 movs r3, #3 + 8002a2e: e036 b.n 8002a9e + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 8002a30: 4b1d ldr r3, [pc, #116] ; (8002aa8 ) + 8002a32: 6a1b ldr r3, [r3, #32] + 8002a34: f003 0302 and.w r3, r3, #2 + 8002a38: 2b00 cmp r3, #0 + 8002a3a: d0ee beq.n 8002a1a + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + 8002a3c: 4b1a ldr r3, [pc, #104] ; (8002aa8 ) + 8002a3e: 6a1b ldr r3, [r3, #32] + 8002a40: f423 7240 bic.w r2, r3, #768 ; 0x300 + 8002a44: 687b ldr r3, [r7, #4] + 8002a46: 685b ldr r3, [r3, #4] + 8002a48: 4917 ldr r1, [pc, #92] ; (8002aa8 ) + 8002a4a: 4313 orrs r3, r2 + 8002a4c: 620b str r3, [r1, #32] + + /* Require to disable power clock if necessary */ + if (pwrclkchanged == SET) + 8002a4e: 7dfb ldrb r3, [r7, #23] + 8002a50: 2b01 cmp r3, #1 + 8002a52: d105 bne.n 8002a60 + { + __HAL_RCC_PWR_CLK_DISABLE(); + 8002a54: 4b14 ldr r3, [pc, #80] ; (8002aa8 ) + 8002a56: 69db ldr r3, [r3, #28] + 8002a58: 4a13 ldr r2, [pc, #76] ; (8002aa8 ) + 8002a5a: f023 5380 bic.w r3, r3, #268435456 ; 0x10000000 + 8002a5e: 61d3 str r3, [r2, #28] + } + } + + /*------------------------------ ADC clock Configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + 8002a60: 687b ldr r3, [r7, #4] + 8002a62: 681b ldr r3, [r3, #0] + 8002a64: f003 0302 and.w r3, r3, #2 + 8002a68: 2b00 cmp r3, #0 + 8002a6a: d008 beq.n 8002a7e + { + /* Check the parameters */ + assert_param(IS_RCC_ADCPLLCLK_DIV(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + 8002a6c: 4b0e ldr r3, [pc, #56] ; (8002aa8 ) + 8002a6e: 685b ldr r3, [r3, #4] + 8002a70: f423 4240 bic.w r2, r3, #49152 ; 0xc000 + 8002a74: 687b ldr r3, [r7, #4] + 8002a76: 689b ldr r3, [r3, #8] + 8002a78: 490b ldr r1, [pc, #44] ; (8002aa8 ) + 8002a7a: 4313 orrs r3, r2 + 8002a7c: 604b str r3, [r1, #4] + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + /*------------------------------ USB clock Configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + 8002a7e: 687b ldr r3, [r7, #4] + 8002a80: 681b ldr r3, [r3, #0] + 8002a82: f003 0310 and.w r3, r3, #16 + 8002a86: 2b00 cmp r3, #0 + 8002a88: d008 beq.n 8002a9c + { + /* Check the parameters */ + assert_param(IS_RCC_USBPLLCLK_DIV(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + 8002a8a: 4b07 ldr r3, [pc, #28] ; (8002aa8 ) + 8002a8c: 685b ldr r3, [r3, #4] + 8002a8e: f423 0280 bic.w r2, r3, #4194304 ; 0x400000 + 8002a92: 687b ldr r3, [r7, #4] + 8002a94: 68db ldr r3, [r3, #12] + 8002a96: 4904 ldr r1, [pc, #16] ; (8002aa8 ) + 8002a98: 4313 orrs r3, r2 + 8002a9a: 604b str r3, [r1, #4] + } +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + + return HAL_OK; + 8002a9c: 2300 movs r3, #0 +} + 8002a9e: 4618 mov r0, r3 + 8002aa0: 3718 adds r7, #24 + 8002aa2: 46bd mov sp, r7 + 8002aa4: bd80 pop {r7, pc} + 8002aa6: bf00 nop + 8002aa8: 40021000 .word 0x40021000 + 8002aac: 40007000 .word 0x40007000 + 8002ab0: 42420440 .word 0x42420440 + +08002ab4 : + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + 8002ab4: b084 sub sp, #16 + 8002ab6: b480 push {r7} + 8002ab8: b083 sub sp, #12 + 8002aba: af00 add r7, sp, #0 + 8002abc: 6078 str r0, [r7, #4] + 8002abe: f107 0014 add.w r0, r7, #20 + 8002ac2: e880 000e stmia.w r0, {r1, r2, r3} + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; + 8002ac6: 2300 movs r3, #0 +} + 8002ac8: 4618 mov r0, r3 + 8002aca: 370c adds r7, #12 + 8002acc: 46bd mov sp, r7 + 8002ace: bc80 pop {r7} + 8002ad0: b004 add sp, #16 + 8002ad2: 4770 bx lr + +08002ad4 : + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) +{ + 8002ad4: b480 push {r7} + 8002ad6: b085 sub sp, #20 + 8002ad8: af00 add r7, sp, #0 + 8002ada: 6078 str r0, [r7, #4] + uint32_t winterruptmask; + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + 8002adc: 687b ldr r3, [r7, #4] + 8002ade: 2200 movs r2, #0 + 8002ae0: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + 8002ae4: f44f 433f mov.w r3, #48896 ; 0xbf00 + 8002ae8: 60fb str r3, [r7, #12] + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM; + + /* Set interrupt mask */ + USBx->CNTR = (uint16_t)winterruptmask; + 8002aea: 68fb ldr r3, [r7, #12] + 8002aec: b29a uxth r2, r3 + 8002aee: 687b ldr r3, [r7, #4] + 8002af0: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + + return HAL_OK; + 8002af4: 2300 movs r3, #0 +} + 8002af6: 4618 mov r0, r3 + 8002af8: 3714 adds r7, #20 + 8002afa: 46bd mov sp, r7 + 8002afc: bc80 pop {r7} + 8002afe: 4770 bx lr + +08002b00 : + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) +{ + 8002b00: b480 push {r7} + 8002b02: b085 sub sp, #20 + 8002b04: af00 add r7, sp, #0 + 8002b06: 6078 str r0, [r7, #4] + uint32_t winterruptmask; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + 8002b08: f44f 433f mov.w r3, #48896 ; 0xbf00 + 8002b0c: 60fb str r3, [r7, #12] + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM; + + /* Clear interrupt mask */ + USBx->CNTR &= (uint16_t)(~winterruptmask); + 8002b0e: 687b ldr r3, [r7, #4] + 8002b10: f8b3 3040 ldrh.w r3, [r3, #64] ; 0x40 + 8002b14: b29a uxth r2, r3 + 8002b16: 68fb ldr r3, [r7, #12] + 8002b18: b29b uxth r3, r3 + 8002b1a: 43db mvns r3, r3 + 8002b1c: b29b uxth r3, r3 + 8002b1e: 4013 ands r3, r2 + 8002b20: b29a uxth r2, r3 + 8002b22: 687b ldr r3, [r7, #4] + 8002b24: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + + return HAL_OK; + 8002b28: 2300 movs r3, #0 +} + 8002b2a: 4618 mov r0, r3 + 8002b2c: 3714 adds r7, #20 + 8002b2e: 46bd mov sp, r7 + 8002b30: bc80 pop {r7} + 8002b32: 4770 bx lr + +08002b34 : + * This parameter can be one of the these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode) +{ + 8002b34: b480 push {r7} + 8002b36: b083 sub sp, #12 + 8002b38: af00 add r7, sp, #0 + 8002b3a: 6078 str r0, [r7, #4] + 8002b3c: 460b mov r3, r1 + 8002b3e: 70fb strb r3, [r7, #3] + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; + 8002b40: 2300 movs r3, #0 +} + 8002b42: 4618 mov r0, r3 + 8002b44: 370c adds r7, #12 + 8002b46: 46bd mov sp, r7 + 8002b48: bc80 pop {r7} + 8002b4a: 4770 bx lr + +08002b4c : + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + 8002b4c: b084 sub sp, #16 + 8002b4e: b480 push {r7} + 8002b50: b083 sub sp, #12 + 8002b52: af00 add r7, sp, #0 + 8002b54: 6078 str r0, [r7, #4] + 8002b56: f107 0014 add.w r0, r7, #20 + 8002b5a: e880 000e stmia.w r0, {r1, r2, r3} + /* Prevent unused argument(s) compilation warning */ + UNUSED(cfg); + + /* Init Device */ + /* CNTR_FRES = 1 */ + USBx->CNTR = (uint16_t)USB_CNTR_FRES; + 8002b5e: 687b ldr r3, [r7, #4] + 8002b60: 2201 movs r2, #1 + 8002b62: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + + /* CNTR_FRES = 0 */ + USBx->CNTR = 0U; + 8002b66: 687b ldr r3, [r7, #4] + 8002b68: 2200 movs r2, #0 + 8002b6a: f8a3 2040 strh.w r2, [r3, #64] ; 0x40 + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + 8002b6e: 687b ldr r3, [r7, #4] + 8002b70: 2200 movs r2, #0 + 8002b72: f8a3 2044 strh.w r2, [r3, #68] ; 0x44 + + /*Set Btable Address*/ + USBx->BTABLE = BTABLE_ADDRESS; + 8002b76: 687b ldr r3, [r7, #4] + 8002b78: 2200 movs r2, #0 + 8002b7a: f8a3 2050 strh.w r2, [r3, #80] ; 0x50 + + return HAL_OK; + 8002b7e: 2300 movs r3, #0 +} + 8002b80: 4618 mov r0, r3 + 8002b82: 370c adds r7, #12 + 8002b84: 46bd mov sp, r7 + 8002b86: bc80 pop {r7} + 8002b88: b004 add sp, #16 + 8002b8a: 4770 bx lr + +08002b8c : + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + 8002b8c: b480 push {r7} + 8002b8e: b09b sub sp, #108 ; 0x6c + 8002b90: af00 add r7, sp, #0 + 8002b92: 6078 str r0, [r7, #4] + 8002b94: 6039 str r1, [r7, #0] + HAL_StatusTypeDef ret = HAL_OK; + 8002b96: 2300 movs r3, #0 + 8002b98: f887 3067 strb.w r3, [r7, #103] ; 0x67 + uint16_t wEpRegVal; + + wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK; + 8002b9c: 687a ldr r2, [r7, #4] + 8002b9e: 683b ldr r3, [r7, #0] + 8002ba0: 781b ldrb r3, [r3, #0] + 8002ba2: 009b lsls r3, r3, #2 + 8002ba4: 4413 add r3, r2 + 8002ba6: 881b ldrh r3, [r3, #0] + 8002ba8: b29b uxth r3, r3 + 8002baa: f423 43ec bic.w r3, r3, #30208 ; 0x7600 + 8002bae: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8002bb2: f8a7 3064 strh.w r3, [r7, #100] ; 0x64 + + /* initialize Endpoint */ + switch (ep->type) + 8002bb6: 683b ldr r3, [r7, #0] + 8002bb8: 78db ldrb r3, [r3, #3] + 8002bba: 2b03 cmp r3, #3 + 8002bbc: d81f bhi.n 8002bfe + 8002bbe: a201 add r2, pc, #4 ; (adr r2, 8002bc4 ) + 8002bc0: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8002bc4: 08002bd5 .word 0x08002bd5 + 8002bc8: 08002bf1 .word 0x08002bf1 + 8002bcc: 08002c07 .word 0x08002c07 + 8002bd0: 08002be3 .word 0x08002be3 + { + case EP_TYPE_CTRL: + wEpRegVal |= USB_EP_CONTROL; + 8002bd4: f8b7 3064 ldrh.w r3, [r7, #100] ; 0x64 + 8002bd8: f443 7300 orr.w r3, r3, #512 ; 0x200 + 8002bdc: f8a7 3064 strh.w r3, [r7, #100] ; 0x64 + break; + 8002be0: e012 b.n 8002c08 + case EP_TYPE_BULK: + wEpRegVal |= USB_EP_BULK; + break; + + case EP_TYPE_INTR: + wEpRegVal |= USB_EP_INTERRUPT; + 8002be2: f8b7 3064 ldrh.w r3, [r7, #100] ; 0x64 + 8002be6: f443 63c0 orr.w r3, r3, #1536 ; 0x600 + 8002bea: f8a7 3064 strh.w r3, [r7, #100] ; 0x64 + break; + 8002bee: e00b b.n 8002c08 + + case EP_TYPE_ISOC: + wEpRegVal |= USB_EP_ISOCHRONOUS; + 8002bf0: f8b7 3064 ldrh.w r3, [r7, #100] ; 0x64 + 8002bf4: f443 6380 orr.w r3, r3, #1024 ; 0x400 + 8002bf8: f8a7 3064 strh.w r3, [r7, #100] ; 0x64 + break; + 8002bfc: e004 b.n 8002c08 + + default: + ret = HAL_ERROR; + 8002bfe: 2301 movs r3, #1 + 8002c00: f887 3067 strb.w r3, [r7, #103] ; 0x67 + break; + 8002c04: e000 b.n 8002c08 + break; + 8002c06: bf00 nop + } + + PCD_SET_ENDPOINT(USBx, ep->num, (wEpRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); + 8002c08: 687a ldr r2, [r7, #4] + 8002c0a: 683b ldr r3, [r7, #0] + 8002c0c: 781b ldrb r3, [r3, #0] + 8002c0e: 009b lsls r3, r3, #2 + 8002c10: 441a add r2, r3 + 8002c12: f8b7 3064 ldrh.w r3, [r7, #100] ; 0x64 + 8002c16: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002c1a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002c1e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8002c22: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8002c26: b29b uxth r3, r3 + 8002c28: 8013 strh r3, [r2, #0] + + PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); + 8002c2a: 687a ldr r2, [r7, #4] + 8002c2c: 683b ldr r3, [r7, #0] + 8002c2e: 781b ldrb r3, [r3, #0] + 8002c30: 009b lsls r3, r3, #2 + 8002c32: 4413 add r3, r2 + 8002c34: 881b ldrh r3, [r3, #0] + 8002c36: b29b uxth r3, r3 + 8002c38: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8002c3c: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8002c40: b29a uxth r2, r3 + 8002c42: 683b ldr r3, [r7, #0] + 8002c44: 781b ldrb r3, [r3, #0] + 8002c46: b29b uxth r3, r3 + 8002c48: 4313 orrs r3, r2 + 8002c4a: f8a7 305e strh.w r3, [r7, #94] ; 0x5e + 8002c4e: 687a ldr r2, [r7, #4] + 8002c50: 683b ldr r3, [r7, #0] + 8002c52: 781b ldrb r3, [r3, #0] + 8002c54: 009b lsls r3, r3, #2 + 8002c56: 441a add r2, r3 + 8002c58: f8b7 305e ldrh.w r3, [r7, #94] ; 0x5e + 8002c5c: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002c60: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002c64: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8002c68: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8002c6c: b29b uxth r3, r3 + 8002c6e: 8013 strh r3, [r2, #0] + + if (ep->doublebuffer == 0U) + 8002c70: 683b ldr r3, [r7, #0] + 8002c72: 7b1b ldrb r3, [r3, #12] + 8002c74: 2b00 cmp r3, #0 + 8002c76: f040 8149 bne.w 8002f0c + { + if (ep->is_in != 0U) + 8002c7a: 683b ldr r3, [r7, #0] + 8002c7c: 785b ldrb r3, [r3, #1] + 8002c7e: 2b00 cmp r3, #0 + 8002c80: f000 8084 beq.w 8002d8c + { + /*Set the endpoint Transmit buffer address */ + PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); + 8002c84: 687b ldr r3, [r7, #4] + 8002c86: 617b str r3, [r7, #20] + 8002c88: 687b ldr r3, [r7, #4] + 8002c8a: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8002c8e: b29b uxth r3, r3 + 8002c90: 461a mov r2, r3 + 8002c92: 697b ldr r3, [r7, #20] + 8002c94: 4413 add r3, r2 + 8002c96: 617b str r3, [r7, #20] + 8002c98: 683b ldr r3, [r7, #0] + 8002c9a: 781b ldrb r3, [r3, #0] + 8002c9c: 011a lsls r2, r3, #4 + 8002c9e: 697b ldr r3, [r7, #20] + 8002ca0: 4413 add r3, r2 + 8002ca2: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8002ca6: 613b str r3, [r7, #16] + 8002ca8: 683b ldr r3, [r7, #0] + 8002caa: 88db ldrh r3, [r3, #6] + 8002cac: 085b lsrs r3, r3, #1 + 8002cae: b29b uxth r3, r3 + 8002cb0: 005b lsls r3, r3, #1 + 8002cb2: b29a uxth r2, r3 + 8002cb4: 693b ldr r3, [r7, #16] + 8002cb6: 801a strh r2, [r3, #0] + PCD_CLEAR_TX_DTOG(USBx, ep->num); + 8002cb8: 687a ldr r2, [r7, #4] + 8002cba: 683b ldr r3, [r7, #0] + 8002cbc: 781b ldrb r3, [r3, #0] + 8002cbe: 009b lsls r3, r3, #2 + 8002cc0: 4413 add r3, r2 + 8002cc2: 881b ldrh r3, [r3, #0] + 8002cc4: 81fb strh r3, [r7, #14] + 8002cc6: 89fb ldrh r3, [r7, #14] + 8002cc8: f003 0340 and.w r3, r3, #64 ; 0x40 + 8002ccc: 2b00 cmp r3, #0 + 8002cce: d01b beq.n 8002d08 + 8002cd0: 687a ldr r2, [r7, #4] + 8002cd2: 683b ldr r3, [r7, #0] + 8002cd4: 781b ldrb r3, [r3, #0] + 8002cd6: 009b lsls r3, r3, #2 + 8002cd8: 4413 add r3, r2 + 8002cda: 881b ldrh r3, [r3, #0] + 8002cdc: b29b uxth r3, r3 + 8002cde: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8002ce2: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8002ce6: 81bb strh r3, [r7, #12] + 8002ce8: 687a ldr r2, [r7, #4] + 8002cea: 683b ldr r3, [r7, #0] + 8002cec: 781b ldrb r3, [r3, #0] + 8002cee: 009b lsls r3, r3, #2 + 8002cf0: 441a add r2, r3 + 8002cf2: 89bb ldrh r3, [r7, #12] + 8002cf4: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002cf8: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002cfc: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8002d00: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8002d04: b29b uxth r3, r3 + 8002d06: 8013 strh r3, [r2, #0] + + if (ep->type != EP_TYPE_ISOC) + 8002d08: 683b ldr r3, [r7, #0] + 8002d0a: 78db ldrb r3, [r3, #3] + 8002d0c: 2b01 cmp r3, #1 + 8002d0e: d020 beq.n 8002d52 + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + 8002d10: 687a ldr r2, [r7, #4] + 8002d12: 683b ldr r3, [r7, #0] + 8002d14: 781b ldrb r3, [r3, #0] + 8002d16: 009b lsls r3, r3, #2 + 8002d18: 4413 add r3, r2 + 8002d1a: 881b ldrh r3, [r3, #0] + 8002d1c: b29b uxth r3, r3 + 8002d1e: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8002d22: f023 0340 bic.w r3, r3, #64 ; 0x40 + 8002d26: 813b strh r3, [r7, #8] + 8002d28: 893b ldrh r3, [r7, #8] + 8002d2a: f083 0320 eor.w r3, r3, #32 + 8002d2e: 813b strh r3, [r7, #8] + 8002d30: 687a ldr r2, [r7, #4] + 8002d32: 683b ldr r3, [r7, #0] + 8002d34: 781b ldrb r3, [r3, #0] + 8002d36: 009b lsls r3, r3, #2 + 8002d38: 441a add r2, r3 + 8002d3a: 893b ldrh r3, [r7, #8] + 8002d3c: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002d40: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002d44: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8002d48: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8002d4c: b29b uxth r3, r3 + 8002d4e: 8013 strh r3, [r2, #0] + 8002d50: e27f b.n 8003252 + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + 8002d52: 687a ldr r2, [r7, #4] + 8002d54: 683b ldr r3, [r7, #0] + 8002d56: 781b ldrb r3, [r3, #0] + 8002d58: 009b lsls r3, r3, #2 + 8002d5a: 4413 add r3, r2 + 8002d5c: 881b ldrh r3, [r3, #0] + 8002d5e: b29b uxth r3, r3 + 8002d60: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8002d64: f023 0340 bic.w r3, r3, #64 ; 0x40 + 8002d68: 817b strh r3, [r7, #10] + 8002d6a: 687a ldr r2, [r7, #4] + 8002d6c: 683b ldr r3, [r7, #0] + 8002d6e: 781b ldrb r3, [r3, #0] + 8002d70: 009b lsls r3, r3, #2 + 8002d72: 441a add r2, r3 + 8002d74: 897b ldrh r3, [r7, #10] + 8002d76: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002d7a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002d7e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8002d82: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8002d86: b29b uxth r3, r3 + 8002d88: 8013 strh r3, [r2, #0] + 8002d8a: e262 b.n 8003252 + } + } + else + { + /*Set the endpoint Receive buffer address */ + PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); + 8002d8c: 687b ldr r3, [r7, #4] + 8002d8e: 62fb str r3, [r7, #44] ; 0x2c + 8002d90: 687b ldr r3, [r7, #4] + 8002d92: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8002d96: b29b uxth r3, r3 + 8002d98: 461a mov r2, r3 + 8002d9a: 6afb ldr r3, [r7, #44] ; 0x2c + 8002d9c: 4413 add r3, r2 + 8002d9e: 62fb str r3, [r7, #44] ; 0x2c + 8002da0: 683b ldr r3, [r7, #0] + 8002da2: 781b ldrb r3, [r3, #0] + 8002da4: 011a lsls r2, r3, #4 + 8002da6: 6afb ldr r3, [r7, #44] ; 0x2c + 8002da8: 4413 add r3, r2 + 8002daa: f503 6381 add.w r3, r3, #1032 ; 0x408 + 8002dae: 62bb str r3, [r7, #40] ; 0x28 + 8002db0: 683b ldr r3, [r7, #0] + 8002db2: 88db ldrh r3, [r3, #6] + 8002db4: 085b lsrs r3, r3, #1 + 8002db6: b29b uxth r3, r3 + 8002db8: 005b lsls r3, r3, #1 + 8002dba: b29a uxth r2, r3 + 8002dbc: 6abb ldr r3, [r7, #40] ; 0x28 + 8002dbe: 801a strh r2, [r3, #0] + + /*Set the endpoint Receive buffer counter*/ + PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); + 8002dc0: 687b ldr r3, [r7, #4] + 8002dc2: 627b str r3, [r7, #36] ; 0x24 + 8002dc4: 687b ldr r3, [r7, #4] + 8002dc6: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8002dca: b29b uxth r3, r3 + 8002dcc: 461a mov r2, r3 + 8002dce: 6a7b ldr r3, [r7, #36] ; 0x24 + 8002dd0: 4413 add r3, r2 + 8002dd2: 627b str r3, [r7, #36] ; 0x24 + 8002dd4: 683b ldr r3, [r7, #0] + 8002dd6: 781b ldrb r3, [r3, #0] + 8002dd8: 011a lsls r2, r3, #4 + 8002dda: 6a7b ldr r3, [r7, #36] ; 0x24 + 8002ddc: 4413 add r3, r2 + 8002dde: f203 430c addw r3, r3, #1036 ; 0x40c + 8002de2: 623b str r3, [r7, #32] + 8002de4: 683b ldr r3, [r7, #0] + 8002de6: 691b ldr r3, [r3, #16] + 8002de8: 2b00 cmp r3, #0 + 8002dea: d112 bne.n 8002e12 + 8002dec: 6a3b ldr r3, [r7, #32] + 8002dee: 881b ldrh r3, [r3, #0] + 8002df0: b29b uxth r3, r3 + 8002df2: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8002df6: b29a uxth r2, r3 + 8002df8: 6a3b ldr r3, [r7, #32] + 8002dfa: 801a strh r2, [r3, #0] + 8002dfc: 6a3b ldr r3, [r7, #32] + 8002dfe: 881b ldrh r3, [r3, #0] + 8002e00: b29b uxth r3, r3 + 8002e02: ea6f 4343 mvn.w r3, r3, lsl #17 + 8002e06: ea6f 4353 mvn.w r3, r3, lsr #17 + 8002e0a: b29a uxth r2, r3 + 8002e0c: 6a3b ldr r3, [r7, #32] + 8002e0e: 801a strh r2, [r3, #0] + 8002e10: e02f b.n 8002e72 + 8002e12: 683b ldr r3, [r7, #0] + 8002e14: 691b ldr r3, [r3, #16] + 8002e16: 2b3e cmp r3, #62 ; 0x3e + 8002e18: d813 bhi.n 8002e42 + 8002e1a: 683b ldr r3, [r7, #0] + 8002e1c: 691b ldr r3, [r3, #16] + 8002e1e: 085b lsrs r3, r3, #1 + 8002e20: 663b str r3, [r7, #96] ; 0x60 + 8002e22: 683b ldr r3, [r7, #0] + 8002e24: 691b ldr r3, [r3, #16] + 8002e26: f003 0301 and.w r3, r3, #1 + 8002e2a: 2b00 cmp r3, #0 + 8002e2c: d002 beq.n 8002e34 + 8002e2e: 6e3b ldr r3, [r7, #96] ; 0x60 + 8002e30: 3301 adds r3, #1 + 8002e32: 663b str r3, [r7, #96] ; 0x60 + 8002e34: 6e3b ldr r3, [r7, #96] ; 0x60 + 8002e36: b29b uxth r3, r3 + 8002e38: 029b lsls r3, r3, #10 + 8002e3a: b29a uxth r2, r3 + 8002e3c: 6a3b ldr r3, [r7, #32] + 8002e3e: 801a strh r2, [r3, #0] + 8002e40: e017 b.n 8002e72 + 8002e42: 683b ldr r3, [r7, #0] + 8002e44: 691b ldr r3, [r3, #16] + 8002e46: 095b lsrs r3, r3, #5 + 8002e48: 663b str r3, [r7, #96] ; 0x60 + 8002e4a: 683b ldr r3, [r7, #0] + 8002e4c: 691b ldr r3, [r3, #16] + 8002e4e: f003 031f and.w r3, r3, #31 + 8002e52: 2b00 cmp r3, #0 + 8002e54: d102 bne.n 8002e5c + 8002e56: 6e3b ldr r3, [r7, #96] ; 0x60 + 8002e58: 3b01 subs r3, #1 + 8002e5a: 663b str r3, [r7, #96] ; 0x60 + 8002e5c: 6e3b ldr r3, [r7, #96] ; 0x60 + 8002e5e: b29b uxth r3, r3 + 8002e60: 029b lsls r3, r3, #10 + 8002e62: b29b uxth r3, r3 + 8002e64: ea6f 4343 mvn.w r3, r3, lsl #17 + 8002e68: ea6f 4353 mvn.w r3, r3, lsr #17 + 8002e6c: b29a uxth r2, r3 + 8002e6e: 6a3b ldr r3, [r7, #32] + 8002e70: 801a strh r2, [r3, #0] + PCD_CLEAR_RX_DTOG(USBx, ep->num); + 8002e72: 687a ldr r2, [r7, #4] + 8002e74: 683b ldr r3, [r7, #0] + 8002e76: 781b ldrb r3, [r3, #0] + 8002e78: 009b lsls r3, r3, #2 + 8002e7a: 4413 add r3, r2 + 8002e7c: 881b ldrh r3, [r3, #0] + 8002e7e: 83fb strh r3, [r7, #30] + 8002e80: 8bfb ldrh r3, [r7, #30] + 8002e82: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 8002e86: 2b00 cmp r3, #0 + 8002e88: d01b beq.n 8002ec2 + 8002e8a: 687a ldr r2, [r7, #4] + 8002e8c: 683b ldr r3, [r7, #0] + 8002e8e: 781b ldrb r3, [r3, #0] + 8002e90: 009b lsls r3, r3, #2 + 8002e92: 4413 add r3, r2 + 8002e94: 881b ldrh r3, [r3, #0] + 8002e96: b29b uxth r3, r3 + 8002e98: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8002e9c: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8002ea0: 83bb strh r3, [r7, #28] + 8002ea2: 687a ldr r2, [r7, #4] + 8002ea4: 683b ldr r3, [r7, #0] + 8002ea6: 781b ldrb r3, [r3, #0] + 8002ea8: 009b lsls r3, r3, #2 + 8002eaa: 441a add r2, r3 + 8002eac: 8bbb ldrh r3, [r7, #28] + 8002eae: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002eb2: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002eb6: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 8002eba: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8002ebe: b29b uxth r3, r3 + 8002ec0: 8013 strh r3, [r2, #0] + + /* Configure VALID status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + 8002ec2: 687a ldr r2, [r7, #4] + 8002ec4: 683b ldr r3, [r7, #0] + 8002ec6: 781b ldrb r3, [r3, #0] + 8002ec8: 009b lsls r3, r3, #2 + 8002eca: 4413 add r3, r2 + 8002ecc: 881b ldrh r3, [r3, #0] + 8002ece: b29b uxth r3, r3 + 8002ed0: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8002ed4: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8002ed8: 837b strh r3, [r7, #26] + 8002eda: 8b7b ldrh r3, [r7, #26] + 8002edc: f483 5380 eor.w r3, r3, #4096 ; 0x1000 + 8002ee0: 837b strh r3, [r7, #26] + 8002ee2: 8b7b ldrh r3, [r7, #26] + 8002ee4: f483 5300 eor.w r3, r3, #8192 ; 0x2000 + 8002ee8: 837b strh r3, [r7, #26] + 8002eea: 687a ldr r2, [r7, #4] + 8002eec: 683b ldr r3, [r7, #0] + 8002eee: 781b ldrb r3, [r3, #0] + 8002ef0: 009b lsls r3, r3, #2 + 8002ef2: 441a add r2, r3 + 8002ef4: 8b7b ldrh r3, [r7, #26] + 8002ef6: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002efa: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002efe: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8002f02: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8002f06: b29b uxth r3, r3 + 8002f08: 8013 strh r3, [r2, #0] + 8002f0a: e1a2 b.n 8003252 + } + /*Double Buffer*/ + else + { + /* Set the endpoint as double buffered */ + PCD_SET_EP_DBUF(USBx, ep->num); + 8002f0c: 687a ldr r2, [r7, #4] + 8002f0e: 683b ldr r3, [r7, #0] + 8002f10: 781b ldrb r3, [r3, #0] + 8002f12: 009b lsls r3, r3, #2 + 8002f14: 4413 add r3, r2 + 8002f16: 881b ldrh r3, [r3, #0] + 8002f18: b29b uxth r3, r3 + 8002f1a: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8002f1e: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8002f22: f8a7 305c strh.w r3, [r7, #92] ; 0x5c + 8002f26: 687a ldr r2, [r7, #4] + 8002f28: 683b ldr r3, [r7, #0] + 8002f2a: 781b ldrb r3, [r3, #0] + 8002f2c: 009b lsls r3, r3, #2 + 8002f2e: 441a add r2, r3 + 8002f30: f8b7 305c ldrh.w r3, [r7, #92] ; 0x5c + 8002f34: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002f38: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002f3c: f443 4301 orr.w r3, r3, #33024 ; 0x8100 + 8002f40: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8002f44: b29b uxth r3, r3 + 8002f46: 8013 strh r3, [r2, #0] + + /* Set buffer address for double buffered mode */ + PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1); + 8002f48: 687b ldr r3, [r7, #4] + 8002f4a: 65bb str r3, [r7, #88] ; 0x58 + 8002f4c: 687b ldr r3, [r7, #4] + 8002f4e: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8002f52: b29b uxth r3, r3 + 8002f54: 461a mov r2, r3 + 8002f56: 6dbb ldr r3, [r7, #88] ; 0x58 + 8002f58: 4413 add r3, r2 + 8002f5a: 65bb str r3, [r7, #88] ; 0x58 + 8002f5c: 683b ldr r3, [r7, #0] + 8002f5e: 781b ldrb r3, [r3, #0] + 8002f60: 011a lsls r2, r3, #4 + 8002f62: 6dbb ldr r3, [r7, #88] ; 0x58 + 8002f64: 4413 add r3, r2 + 8002f66: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8002f6a: 657b str r3, [r7, #84] ; 0x54 + 8002f6c: 683b ldr r3, [r7, #0] + 8002f6e: 891b ldrh r3, [r3, #8] + 8002f70: 085b lsrs r3, r3, #1 + 8002f72: b29b uxth r3, r3 + 8002f74: 005b lsls r3, r3, #1 + 8002f76: b29a uxth r2, r3 + 8002f78: 6d7b ldr r3, [r7, #84] ; 0x54 + 8002f7a: 801a strh r2, [r3, #0] + 8002f7c: 687b ldr r3, [r7, #4] + 8002f7e: 653b str r3, [r7, #80] ; 0x50 + 8002f80: 687b ldr r3, [r7, #4] + 8002f82: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8002f86: b29b uxth r3, r3 + 8002f88: 461a mov r2, r3 + 8002f8a: 6d3b ldr r3, [r7, #80] ; 0x50 + 8002f8c: 4413 add r3, r2 + 8002f8e: 653b str r3, [r7, #80] ; 0x50 + 8002f90: 683b ldr r3, [r7, #0] + 8002f92: 781b ldrb r3, [r3, #0] + 8002f94: 011a lsls r2, r3, #4 + 8002f96: 6d3b ldr r3, [r7, #80] ; 0x50 + 8002f98: 4413 add r3, r2 + 8002f9a: f503 6381 add.w r3, r3, #1032 ; 0x408 + 8002f9e: 64fb str r3, [r7, #76] ; 0x4c + 8002fa0: 683b ldr r3, [r7, #0] + 8002fa2: 895b ldrh r3, [r3, #10] + 8002fa4: 085b lsrs r3, r3, #1 + 8002fa6: b29b uxth r3, r3 + 8002fa8: 005b lsls r3, r3, #1 + 8002faa: b29a uxth r2, r3 + 8002fac: 6cfb ldr r3, [r7, #76] ; 0x4c + 8002fae: 801a strh r2, [r3, #0] + + if (ep->is_in == 0U) + 8002fb0: 683b ldr r3, [r7, #0] + 8002fb2: 785b ldrb r3, [r3, #1] + 8002fb4: 2b00 cmp r3, #0 + 8002fb6: f040 8091 bne.w 80030dc + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + 8002fba: 687a ldr r2, [r7, #4] + 8002fbc: 683b ldr r3, [r7, #0] + 8002fbe: 781b ldrb r3, [r3, #0] + 8002fc0: 009b lsls r3, r3, #2 + 8002fc2: 4413 add r3, r2 + 8002fc4: 881b ldrh r3, [r3, #0] + 8002fc6: 87bb strh r3, [r7, #60] ; 0x3c + 8002fc8: 8fbb ldrh r3, [r7, #60] ; 0x3c + 8002fca: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 8002fce: 2b00 cmp r3, #0 + 8002fd0: d01b beq.n 800300a + 8002fd2: 687a ldr r2, [r7, #4] + 8002fd4: 683b ldr r3, [r7, #0] + 8002fd6: 781b ldrb r3, [r3, #0] + 8002fd8: 009b lsls r3, r3, #2 + 8002fda: 4413 add r3, r2 + 8002fdc: 881b ldrh r3, [r3, #0] + 8002fde: b29b uxth r3, r3 + 8002fe0: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8002fe4: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8002fe8: 877b strh r3, [r7, #58] ; 0x3a + 8002fea: 687a ldr r2, [r7, #4] + 8002fec: 683b ldr r3, [r7, #0] + 8002fee: 781b ldrb r3, [r3, #0] + 8002ff0: 009b lsls r3, r3, #2 + 8002ff2: 441a add r2, r3 + 8002ff4: 8f7b ldrh r3, [r7, #58] ; 0x3a + 8002ff6: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8002ffa: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8002ffe: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 8003002: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003006: b29b uxth r3, r3 + 8003008: 8013 strh r3, [r2, #0] + PCD_CLEAR_TX_DTOG(USBx, ep->num); + 800300a: 687a ldr r2, [r7, #4] + 800300c: 683b ldr r3, [r7, #0] + 800300e: 781b ldrb r3, [r3, #0] + 8003010: 009b lsls r3, r3, #2 + 8003012: 4413 add r3, r2 + 8003014: 881b ldrh r3, [r3, #0] + 8003016: 873b strh r3, [r7, #56] ; 0x38 + 8003018: 8f3b ldrh r3, [r7, #56] ; 0x38 + 800301a: f003 0340 and.w r3, r3, #64 ; 0x40 + 800301e: 2b00 cmp r3, #0 + 8003020: d01b beq.n 800305a + 8003022: 687a ldr r2, [r7, #4] + 8003024: 683b ldr r3, [r7, #0] + 8003026: 781b ldrb r3, [r3, #0] + 8003028: 009b lsls r3, r3, #2 + 800302a: 4413 add r3, r2 + 800302c: 881b ldrh r3, [r3, #0] + 800302e: b29b uxth r3, r3 + 8003030: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8003034: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003038: 86fb strh r3, [r7, #54] ; 0x36 + 800303a: 687a ldr r2, [r7, #4] + 800303c: 683b ldr r3, [r7, #0] + 800303e: 781b ldrb r3, [r3, #0] + 8003040: 009b lsls r3, r3, #2 + 8003042: 441a add r2, r3 + 8003044: 8efb ldrh r3, [r7, #54] ; 0x36 + 8003046: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800304a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800304e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8003052: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8003056: b29b uxth r3, r3 + 8003058: 8013 strh r3, [r2, #0] + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + 800305a: 687a ldr r2, [r7, #4] + 800305c: 683b ldr r3, [r7, #0] + 800305e: 781b ldrb r3, [r3, #0] + 8003060: 009b lsls r3, r3, #2 + 8003062: 4413 add r3, r2 + 8003064: 881b ldrh r3, [r3, #0] + 8003066: b29b uxth r3, r3 + 8003068: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 800306c: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003070: 86bb strh r3, [r7, #52] ; 0x34 + 8003072: 8ebb ldrh r3, [r7, #52] ; 0x34 + 8003074: f483 5380 eor.w r3, r3, #4096 ; 0x1000 + 8003078: 86bb strh r3, [r7, #52] ; 0x34 + 800307a: 8ebb ldrh r3, [r7, #52] ; 0x34 + 800307c: f483 5300 eor.w r3, r3, #8192 ; 0x2000 + 8003080: 86bb strh r3, [r7, #52] ; 0x34 + 8003082: 687a ldr r2, [r7, #4] + 8003084: 683b ldr r3, [r7, #0] + 8003086: 781b ldrb r3, [r3, #0] + 8003088: 009b lsls r3, r3, #2 + 800308a: 441a add r2, r3 + 800308c: 8ebb ldrh r3, [r7, #52] ; 0x34 + 800308e: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003092: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003096: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 800309a: f043 0380 orr.w r3, r3, #128 ; 0x80 + 800309e: b29b uxth r3, r3 + 80030a0: 8013 strh r3, [r2, #0] + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + 80030a2: 687a ldr r2, [r7, #4] + 80030a4: 683b ldr r3, [r7, #0] + 80030a6: 781b ldrb r3, [r3, #0] + 80030a8: 009b lsls r3, r3, #2 + 80030aa: 4413 add r3, r2 + 80030ac: 881b ldrh r3, [r3, #0] + 80030ae: b29b uxth r3, r3 + 80030b0: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80030b4: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80030b8: 867b strh r3, [r7, #50] ; 0x32 + 80030ba: 687a ldr r2, [r7, #4] + 80030bc: 683b ldr r3, [r7, #0] + 80030be: 781b ldrb r3, [r3, #0] + 80030c0: 009b lsls r3, r3, #2 + 80030c2: 441a add r2, r3 + 80030c4: 8e7b ldrh r3, [r7, #50] ; 0x32 + 80030c6: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80030ca: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80030ce: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80030d2: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80030d6: b29b uxth r3, r3 + 80030d8: 8013 strh r3, [r2, #0] + 80030da: e0ba b.n 8003252 + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + 80030dc: 687a ldr r2, [r7, #4] + 80030de: 683b ldr r3, [r7, #0] + 80030e0: 781b ldrb r3, [r3, #0] + 80030e2: 009b lsls r3, r3, #2 + 80030e4: 4413 add r3, r2 + 80030e6: 881b ldrh r3, [r3, #0] + 80030e8: f8a7 304a strh.w r3, [r7, #74] ; 0x4a + 80030ec: f8b7 304a ldrh.w r3, [r7, #74] ; 0x4a + 80030f0: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 80030f4: 2b00 cmp r3, #0 + 80030f6: d01d beq.n 8003134 + 80030f8: 687a ldr r2, [r7, #4] + 80030fa: 683b ldr r3, [r7, #0] + 80030fc: 781b ldrb r3, [r3, #0] + 80030fe: 009b lsls r3, r3, #2 + 8003100: 4413 add r3, r2 + 8003102: 881b ldrh r3, [r3, #0] + 8003104: b29b uxth r3, r3 + 8003106: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 800310a: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800310e: f8a7 3048 strh.w r3, [r7, #72] ; 0x48 + 8003112: 687a ldr r2, [r7, #4] + 8003114: 683b ldr r3, [r7, #0] + 8003116: 781b ldrb r3, [r3, #0] + 8003118: 009b lsls r3, r3, #2 + 800311a: 441a add r2, r3 + 800311c: f8b7 3048 ldrh.w r3, [r7, #72] ; 0x48 + 8003120: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003124: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003128: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 800312c: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003130: b29b uxth r3, r3 + 8003132: 8013 strh r3, [r2, #0] + PCD_CLEAR_TX_DTOG(USBx, ep->num); + 8003134: 687a ldr r2, [r7, #4] + 8003136: 683b ldr r3, [r7, #0] + 8003138: 781b ldrb r3, [r3, #0] + 800313a: 009b lsls r3, r3, #2 + 800313c: 4413 add r3, r2 + 800313e: 881b ldrh r3, [r3, #0] + 8003140: f8a7 3046 strh.w r3, [r7, #70] ; 0x46 + 8003144: f8b7 3046 ldrh.w r3, [r7, #70] ; 0x46 + 8003148: f003 0340 and.w r3, r3, #64 ; 0x40 + 800314c: 2b00 cmp r3, #0 + 800314e: d01d beq.n 800318c + 8003150: 687a ldr r2, [r7, #4] + 8003152: 683b ldr r3, [r7, #0] + 8003154: 781b ldrb r3, [r3, #0] + 8003156: 009b lsls r3, r3, #2 + 8003158: 4413 add r3, r2 + 800315a: 881b ldrh r3, [r3, #0] + 800315c: b29b uxth r3, r3 + 800315e: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8003162: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003166: f8a7 3044 strh.w r3, [r7, #68] ; 0x44 + 800316a: 687a ldr r2, [r7, #4] + 800316c: 683b ldr r3, [r7, #0] + 800316e: 781b ldrb r3, [r3, #0] + 8003170: 009b lsls r3, r3, #2 + 8003172: 441a add r2, r3 + 8003174: f8b7 3044 ldrh.w r3, [r7, #68] ; 0x44 + 8003178: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800317c: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003180: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8003184: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8003188: b29b uxth r3, r3 + 800318a: 8013 strh r3, [r2, #0] + + if (ep->type != EP_TYPE_ISOC) + 800318c: 683b ldr r3, [r7, #0] + 800318e: 78db ldrb r3, [r3, #3] + 8003190: 2b01 cmp r3, #1 + 8003192: d024 beq.n 80031de + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + 8003194: 687a ldr r2, [r7, #4] + 8003196: 683b ldr r3, [r7, #0] + 8003198: 781b ldrb r3, [r3, #0] + 800319a: 009b lsls r3, r3, #2 + 800319c: 4413 add r3, r2 + 800319e: 881b ldrh r3, [r3, #0] + 80031a0: b29b uxth r3, r3 + 80031a2: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80031a6: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80031aa: f8a7 3040 strh.w r3, [r7, #64] ; 0x40 + 80031ae: f8b7 3040 ldrh.w r3, [r7, #64] ; 0x40 + 80031b2: f083 0320 eor.w r3, r3, #32 + 80031b6: f8a7 3040 strh.w r3, [r7, #64] ; 0x40 + 80031ba: 687a ldr r2, [r7, #4] + 80031bc: 683b ldr r3, [r7, #0] + 80031be: 781b ldrb r3, [r3, #0] + 80031c0: 009b lsls r3, r3, #2 + 80031c2: 441a add r2, r3 + 80031c4: f8b7 3040 ldrh.w r3, [r7, #64] ; 0x40 + 80031c8: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80031cc: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80031d0: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80031d4: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80031d8: b29b uxth r3, r3 + 80031da: 8013 strh r3, [r2, #0] + 80031dc: e01d b.n 800321a + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + 80031de: 687a ldr r2, [r7, #4] + 80031e0: 683b ldr r3, [r7, #0] + 80031e2: 781b ldrb r3, [r3, #0] + 80031e4: 009b lsls r3, r3, #2 + 80031e6: 4413 add r3, r2 + 80031e8: 881b ldrh r3, [r3, #0] + 80031ea: b29b uxth r3, r3 + 80031ec: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80031f0: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80031f4: f8a7 3042 strh.w r3, [r7, #66] ; 0x42 + 80031f8: 687a ldr r2, [r7, #4] + 80031fa: 683b ldr r3, [r7, #0] + 80031fc: 781b ldrb r3, [r3, #0] + 80031fe: 009b lsls r3, r3, #2 + 8003200: 441a add r2, r3 + 8003202: f8b7 3042 ldrh.w r3, [r7, #66] ; 0x42 + 8003206: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800320a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800320e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8003212: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003216: b29b uxth r3, r3 + 8003218: 8013 strh r3, [r2, #0] + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + 800321a: 687a ldr r2, [r7, #4] + 800321c: 683b ldr r3, [r7, #0] + 800321e: 781b ldrb r3, [r3, #0] + 8003220: 009b lsls r3, r3, #2 + 8003222: 4413 add r3, r2 + 8003224: 881b ldrh r3, [r3, #0] + 8003226: b29b uxth r3, r3 + 8003228: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 800322c: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003230: 87fb strh r3, [r7, #62] ; 0x3e + 8003232: 687a ldr r2, [r7, #4] + 8003234: 683b ldr r3, [r7, #0] + 8003236: 781b ldrb r3, [r3, #0] + 8003238: 009b lsls r3, r3, #2 + 800323a: 441a add r2, r3 + 800323c: 8ffb ldrh r3, [r7, #62] ; 0x3e + 800323e: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003242: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003246: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 800324a: f043 0380 orr.w r3, r3, #128 ; 0x80 + 800324e: b29b uxth r3, r3 + 8003250: 8013 strh r3, [r2, #0] + } + } + + return ret; + 8003252: f897 3067 ldrb.w r3, [r7, #103] ; 0x67 +} + 8003256: 4618 mov r0, r3 + 8003258: 376c adds r7, #108 ; 0x6c + 800325a: 46bd mov sp, r7 + 800325c: bc80 pop {r7} + 800325e: 4770 bx lr + +08003260 : + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + 8003260: b480 push {r7} + 8003262: b08d sub sp, #52 ; 0x34 + 8003264: af00 add r7, sp, #0 + 8003266: 6078 str r0, [r7, #4] + 8003268: 6039 str r1, [r7, #0] + if (ep->doublebuffer == 0U) + 800326a: 683b ldr r3, [r7, #0] + 800326c: 7b1b ldrb r3, [r3, #12] + 800326e: 2b00 cmp r3, #0 + 8003270: f040 808e bne.w 8003390 + { + if (ep->is_in != 0U) + 8003274: 683b ldr r3, [r7, #0] + 8003276: 785b ldrb r3, [r3, #1] + 8003278: 2b00 cmp r3, #0 + 800327a: d044 beq.n 8003306 + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + 800327c: 687a ldr r2, [r7, #4] + 800327e: 683b ldr r3, [r7, #0] + 8003280: 781b ldrb r3, [r3, #0] + 8003282: 009b lsls r3, r3, #2 + 8003284: 4413 add r3, r2 + 8003286: 881b ldrh r3, [r3, #0] + 8003288: 81bb strh r3, [r7, #12] + 800328a: 89bb ldrh r3, [r7, #12] + 800328c: f003 0340 and.w r3, r3, #64 ; 0x40 + 8003290: 2b00 cmp r3, #0 + 8003292: d01b beq.n 80032cc + 8003294: 687a ldr r2, [r7, #4] + 8003296: 683b ldr r3, [r7, #0] + 8003298: 781b ldrb r3, [r3, #0] + 800329a: 009b lsls r3, r3, #2 + 800329c: 4413 add r3, r2 + 800329e: 881b ldrh r3, [r3, #0] + 80032a0: b29b uxth r3, r3 + 80032a2: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80032a6: f023 0370 bic.w r3, r3, #112 ; 0x70 + 80032aa: 817b strh r3, [r7, #10] + 80032ac: 687a ldr r2, [r7, #4] + 80032ae: 683b ldr r3, [r7, #0] + 80032b0: 781b ldrb r3, [r3, #0] + 80032b2: 009b lsls r3, r3, #2 + 80032b4: 441a add r2, r3 + 80032b6: 897b ldrh r3, [r7, #10] + 80032b8: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80032bc: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80032c0: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80032c4: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 80032c8: b29b uxth r3, r3 + 80032ca: 8013 strh r3, [r2, #0] + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + 80032cc: 687a ldr r2, [r7, #4] + 80032ce: 683b ldr r3, [r7, #0] + 80032d0: 781b ldrb r3, [r3, #0] + 80032d2: 009b lsls r3, r3, #2 + 80032d4: 4413 add r3, r2 + 80032d6: 881b ldrh r3, [r3, #0] + 80032d8: b29b uxth r3, r3 + 80032da: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80032de: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80032e2: 813b strh r3, [r7, #8] + 80032e4: 687a ldr r2, [r7, #4] + 80032e6: 683b ldr r3, [r7, #0] + 80032e8: 781b ldrb r3, [r3, #0] + 80032ea: 009b lsls r3, r3, #2 + 80032ec: 441a add r2, r3 + 80032ee: 893b ldrh r3, [r7, #8] + 80032f0: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80032f4: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80032f8: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80032fc: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003300: b29b uxth r3, r3 + 8003302: 8013 strh r3, [r2, #0] + 8003304: e192 b.n 800362c + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + 8003306: 687a ldr r2, [r7, #4] + 8003308: 683b ldr r3, [r7, #0] + 800330a: 781b ldrb r3, [r3, #0] + 800330c: 009b lsls r3, r3, #2 + 800330e: 4413 add r3, r2 + 8003310: 881b ldrh r3, [r3, #0] + 8003312: 827b strh r3, [r7, #18] + 8003314: 8a7b ldrh r3, [r7, #18] + 8003316: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 800331a: 2b00 cmp r3, #0 + 800331c: d01b beq.n 8003356 + 800331e: 687a ldr r2, [r7, #4] + 8003320: 683b ldr r3, [r7, #0] + 8003322: 781b ldrb r3, [r3, #0] + 8003324: 009b lsls r3, r3, #2 + 8003326: 4413 add r3, r2 + 8003328: 881b ldrh r3, [r3, #0] + 800332a: b29b uxth r3, r3 + 800332c: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8003330: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003334: 823b strh r3, [r7, #16] + 8003336: 687a ldr r2, [r7, #4] + 8003338: 683b ldr r3, [r7, #0] + 800333a: 781b ldrb r3, [r3, #0] + 800333c: 009b lsls r3, r3, #2 + 800333e: 441a add r2, r3 + 8003340: 8a3b ldrh r3, [r7, #16] + 8003342: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003346: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800334a: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 800334e: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003352: b29b uxth r3, r3 + 8003354: 8013 strh r3, [r2, #0] + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + 8003356: 687a ldr r2, [r7, #4] + 8003358: 683b ldr r3, [r7, #0] + 800335a: 781b ldrb r3, [r3, #0] + 800335c: 009b lsls r3, r3, #2 + 800335e: 4413 add r3, r2 + 8003360: 881b ldrh r3, [r3, #0] + 8003362: b29b uxth r3, r3 + 8003364: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8003368: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800336c: 81fb strh r3, [r7, #14] + 800336e: 687a ldr r2, [r7, #4] + 8003370: 683b ldr r3, [r7, #0] + 8003372: 781b ldrb r3, [r3, #0] + 8003374: 009b lsls r3, r3, #2 + 8003376: 441a add r2, r3 + 8003378: 89fb ldrh r3, [r7, #14] + 800337a: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800337e: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003382: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8003386: f043 0380 orr.w r3, r3, #128 ; 0x80 + 800338a: b29b uxth r3, r3 + 800338c: 8013 strh r3, [r2, #0] + 800338e: e14d b.n 800362c + } + } + /*Double Buffer*/ + else + { + if (ep->is_in == 0U) + 8003390: 683b ldr r3, [r7, #0] + 8003392: 785b ldrb r3, [r3, #1] + 8003394: 2b00 cmp r3, #0 + 8003396: f040 80a5 bne.w 80034e4 + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + 800339a: 687a ldr r2, [r7, #4] + 800339c: 683b ldr r3, [r7, #0] + 800339e: 781b ldrb r3, [r3, #0] + 80033a0: 009b lsls r3, r3, #2 + 80033a2: 4413 add r3, r2 + 80033a4: 881b ldrh r3, [r3, #0] + 80033a6: 843b strh r3, [r7, #32] + 80033a8: 8c3b ldrh r3, [r7, #32] + 80033aa: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 80033ae: 2b00 cmp r3, #0 + 80033b0: d01b beq.n 80033ea + 80033b2: 687a ldr r2, [r7, #4] + 80033b4: 683b ldr r3, [r7, #0] + 80033b6: 781b ldrb r3, [r3, #0] + 80033b8: 009b lsls r3, r3, #2 + 80033ba: 4413 add r3, r2 + 80033bc: 881b ldrh r3, [r3, #0] + 80033be: b29b uxth r3, r3 + 80033c0: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80033c4: f023 0370 bic.w r3, r3, #112 ; 0x70 + 80033c8: 83fb strh r3, [r7, #30] + 80033ca: 687a ldr r2, [r7, #4] + 80033cc: 683b ldr r3, [r7, #0] + 80033ce: 781b ldrb r3, [r3, #0] + 80033d0: 009b lsls r3, r3, #2 + 80033d2: 441a add r2, r3 + 80033d4: 8bfb ldrh r3, [r7, #30] + 80033d6: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80033da: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80033de: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 80033e2: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80033e6: b29b uxth r3, r3 + 80033e8: 8013 strh r3, [r2, #0] + PCD_CLEAR_TX_DTOG(USBx, ep->num); + 80033ea: 687a ldr r2, [r7, #4] + 80033ec: 683b ldr r3, [r7, #0] + 80033ee: 781b ldrb r3, [r3, #0] + 80033f0: 009b lsls r3, r3, #2 + 80033f2: 4413 add r3, r2 + 80033f4: 881b ldrh r3, [r3, #0] + 80033f6: 83bb strh r3, [r7, #28] + 80033f8: 8bbb ldrh r3, [r7, #28] + 80033fa: f003 0340 and.w r3, r3, #64 ; 0x40 + 80033fe: 2b00 cmp r3, #0 + 8003400: d01b beq.n 800343a + 8003402: 687a ldr r2, [r7, #4] + 8003404: 683b ldr r3, [r7, #0] + 8003406: 781b ldrb r3, [r3, #0] + 8003408: 009b lsls r3, r3, #2 + 800340a: 4413 add r3, r2 + 800340c: 881b ldrh r3, [r3, #0] + 800340e: b29b uxth r3, r3 + 8003410: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8003414: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003418: 837b strh r3, [r7, #26] + 800341a: 687a ldr r2, [r7, #4] + 800341c: 683b ldr r3, [r7, #0] + 800341e: 781b ldrb r3, [r3, #0] + 8003420: 009b lsls r3, r3, #2 + 8003422: 441a add r2, r3 + 8003424: 8b7b ldrh r3, [r7, #26] + 8003426: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800342a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800342e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8003432: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8003436: b29b uxth r3, r3 + 8003438: 8013 strh r3, [r2, #0] + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(USBx, ep->num); + 800343a: 687a ldr r2, [r7, #4] + 800343c: 683b ldr r3, [r7, #0] + 800343e: 781b ldrb r3, [r3, #0] + 8003440: 009b lsls r3, r3, #2 + 8003442: 4413 add r3, r2 + 8003444: 881b ldrh r3, [r3, #0] + 8003446: b29b uxth r3, r3 + 8003448: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 800344c: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003450: 833b strh r3, [r7, #24] + 8003452: 687a ldr r2, [r7, #4] + 8003454: 683b ldr r3, [r7, #0] + 8003456: 781b ldrb r3, [r3, #0] + 8003458: 009b lsls r3, r3, #2 + 800345a: 441a add r2, r3 + 800345c: 8b3b ldrh r3, [r7, #24] + 800345e: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003462: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003466: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 800346a: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 800346e: b29b uxth r3, r3 + 8003470: 8013 strh r3, [r2, #0] + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + 8003472: 687a ldr r2, [r7, #4] + 8003474: 683b ldr r3, [r7, #0] + 8003476: 781b ldrb r3, [r3, #0] + 8003478: 009b lsls r3, r3, #2 + 800347a: 4413 add r3, r2 + 800347c: 881b ldrh r3, [r3, #0] + 800347e: b29b uxth r3, r3 + 8003480: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8003484: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003488: 82fb strh r3, [r7, #22] + 800348a: 687a ldr r2, [r7, #4] + 800348c: 683b ldr r3, [r7, #0] + 800348e: 781b ldrb r3, [r3, #0] + 8003490: 009b lsls r3, r3, #2 + 8003492: 441a add r2, r3 + 8003494: 8afb ldrh r3, [r7, #22] + 8003496: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800349a: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800349e: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80034a2: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80034a6: b29b uxth r3, r3 + 80034a8: 8013 strh r3, [r2, #0] + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + 80034aa: 687a ldr r2, [r7, #4] + 80034ac: 683b ldr r3, [r7, #0] + 80034ae: 781b ldrb r3, [r3, #0] + 80034b0: 009b lsls r3, r3, #2 + 80034b2: 4413 add r3, r2 + 80034b4: 881b ldrh r3, [r3, #0] + 80034b6: b29b uxth r3, r3 + 80034b8: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80034bc: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80034c0: 82bb strh r3, [r7, #20] + 80034c2: 687a ldr r2, [r7, #4] + 80034c4: 683b ldr r3, [r7, #0] + 80034c6: 781b ldrb r3, [r3, #0] + 80034c8: 009b lsls r3, r3, #2 + 80034ca: 441a add r2, r3 + 80034cc: 8abb ldrh r3, [r7, #20] + 80034ce: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80034d2: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80034d6: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80034da: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80034de: b29b uxth r3, r3 + 80034e0: 8013 strh r3, [r2, #0] + 80034e2: e0a3 b.n 800362c + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + 80034e4: 687a ldr r2, [r7, #4] + 80034e6: 683b ldr r3, [r7, #0] + 80034e8: 781b ldrb r3, [r3, #0] + 80034ea: 009b lsls r3, r3, #2 + 80034ec: 4413 add r3, r2 + 80034ee: 881b ldrh r3, [r3, #0] + 80034f0: 85fb strh r3, [r7, #46] ; 0x2e + 80034f2: 8dfb ldrh r3, [r7, #46] ; 0x2e + 80034f4: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 80034f8: 2b00 cmp r3, #0 + 80034fa: d01b beq.n 8003534 + 80034fc: 687a ldr r2, [r7, #4] + 80034fe: 683b ldr r3, [r7, #0] + 8003500: 781b ldrb r3, [r3, #0] + 8003502: 009b lsls r3, r3, #2 + 8003504: 4413 add r3, r2 + 8003506: 881b ldrh r3, [r3, #0] + 8003508: b29b uxth r3, r3 + 800350a: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 800350e: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003512: 85bb strh r3, [r7, #44] ; 0x2c + 8003514: 687a ldr r2, [r7, #4] + 8003516: 683b ldr r3, [r7, #0] + 8003518: 781b ldrb r3, [r3, #0] + 800351a: 009b lsls r3, r3, #2 + 800351c: 441a add r2, r3 + 800351e: 8dbb ldrh r3, [r7, #44] ; 0x2c + 8003520: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003524: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003528: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 800352c: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003530: b29b uxth r3, r3 + 8003532: 8013 strh r3, [r2, #0] + PCD_CLEAR_TX_DTOG(USBx, ep->num); + 8003534: 687a ldr r2, [r7, #4] + 8003536: 683b ldr r3, [r7, #0] + 8003538: 781b ldrb r3, [r3, #0] + 800353a: 009b lsls r3, r3, #2 + 800353c: 4413 add r3, r2 + 800353e: 881b ldrh r3, [r3, #0] + 8003540: 857b strh r3, [r7, #42] ; 0x2a + 8003542: 8d7b ldrh r3, [r7, #42] ; 0x2a + 8003544: f003 0340 and.w r3, r3, #64 ; 0x40 + 8003548: 2b00 cmp r3, #0 + 800354a: d01b beq.n 8003584 + 800354c: 687a ldr r2, [r7, #4] + 800354e: 683b ldr r3, [r7, #0] + 8003550: 781b ldrb r3, [r3, #0] + 8003552: 009b lsls r3, r3, #2 + 8003554: 4413 add r3, r2 + 8003556: 881b ldrh r3, [r3, #0] + 8003558: b29b uxth r3, r3 + 800355a: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 800355e: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003562: 853b strh r3, [r7, #40] ; 0x28 + 8003564: 687a ldr r2, [r7, #4] + 8003566: 683b ldr r3, [r7, #0] + 8003568: 781b ldrb r3, [r3, #0] + 800356a: 009b lsls r3, r3, #2 + 800356c: 441a add r2, r3 + 800356e: 8d3b ldrh r3, [r7, #40] ; 0x28 + 8003570: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003574: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003578: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 800357c: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8003580: b29b uxth r3, r3 + 8003582: 8013 strh r3, [r2, #0] + PCD_RX_DTOG(USBx, ep->num); + 8003584: 687a ldr r2, [r7, #4] + 8003586: 683b ldr r3, [r7, #0] + 8003588: 781b ldrb r3, [r3, #0] + 800358a: 009b lsls r3, r3, #2 + 800358c: 4413 add r3, r2 + 800358e: 881b ldrh r3, [r3, #0] + 8003590: b29b uxth r3, r3 + 8003592: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8003596: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800359a: 84fb strh r3, [r7, #38] ; 0x26 + 800359c: 687a ldr r2, [r7, #4] + 800359e: 683b ldr r3, [r7, #0] + 80035a0: 781b ldrb r3, [r3, #0] + 80035a2: 009b lsls r3, r3, #2 + 80035a4: 441a add r2, r3 + 80035a6: 8cfb ldrh r3, [r7, #38] ; 0x26 + 80035a8: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80035ac: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80035b0: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 80035b4: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80035b8: b29b uxth r3, r3 + 80035ba: 8013 strh r3, [r2, #0] + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + 80035bc: 687a ldr r2, [r7, #4] + 80035be: 683b ldr r3, [r7, #0] + 80035c0: 781b ldrb r3, [r3, #0] + 80035c2: 009b lsls r3, r3, #2 + 80035c4: 4413 add r3, r2 + 80035c6: 881b ldrh r3, [r3, #0] + 80035c8: b29b uxth r3, r3 + 80035ca: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80035ce: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80035d2: 84bb strh r3, [r7, #36] ; 0x24 + 80035d4: 687a ldr r2, [r7, #4] + 80035d6: 683b ldr r3, [r7, #0] + 80035d8: 781b ldrb r3, [r3, #0] + 80035da: 009b lsls r3, r3, #2 + 80035dc: 441a add r2, r3 + 80035de: 8cbb ldrh r3, [r7, #36] ; 0x24 + 80035e0: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80035e4: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80035e8: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80035ec: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80035f0: b29b uxth r3, r3 + 80035f2: 8013 strh r3, [r2, #0] + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + 80035f4: 687a ldr r2, [r7, #4] + 80035f6: 683b ldr r3, [r7, #0] + 80035f8: 781b ldrb r3, [r3, #0] + 80035fa: 009b lsls r3, r3, #2 + 80035fc: 4413 add r3, r2 + 80035fe: 881b ldrh r3, [r3, #0] + 8003600: b29b uxth r3, r3 + 8003602: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8003606: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800360a: 847b strh r3, [r7, #34] ; 0x22 + 800360c: 687a ldr r2, [r7, #4] + 800360e: 683b ldr r3, [r7, #0] + 8003610: 781b ldrb r3, [r3, #0] + 8003612: 009b lsls r3, r3, #2 + 8003614: 441a add r2, r3 + 8003616: 8c7b ldrh r3, [r7, #34] ; 0x22 + 8003618: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800361c: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003620: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8003624: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003628: b29b uxth r3, r3 + 800362a: 8013 strh r3, [r2, #0] + } + } + + return HAL_OK; + 800362c: 2300 movs r3, #0 +} + 800362e: 4618 mov r0, r3 + 8003630: 3734 adds r7, #52 ; 0x34 + 8003632: 46bd mov sp, r7 + 8003634: bc80 pop {r7} + 8003636: 4770 bx lr + +08003638 : + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + 8003638: b580 push {r7, lr} + 800363a: b0c4 sub sp, #272 ; 0x110 + 800363c: af00 add r7, sp, #0 + 800363e: 1d3b adds r3, r7, #4 + 8003640: 6018 str r0, [r3, #0] + 8003642: 463b mov r3, r7 + 8003644: 6019 str r1, [r3, #0] + uint32_t len; + uint16_t pmabuffer; + uint16_t wEPVal; + + /* IN endpoint */ + if (ep->is_in == 1U) + 8003646: 463b mov r3, r7 + 8003648: 681b ldr r3, [r3, #0] + 800364a: 785b ldrb r3, [r3, #1] + 800364c: 2b01 cmp r3, #1 + 800364e: f040 8557 bne.w 8004100 + { + /*Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + 8003652: 463b mov r3, r7 + 8003654: 681b ldr r3, [r3, #0] + 8003656: 699a ldr r2, [r3, #24] + 8003658: 463b mov r3, r7 + 800365a: 681b ldr r3, [r3, #0] + 800365c: 691b ldr r3, [r3, #16] + 800365e: 429a cmp r2, r3 + 8003660: d905 bls.n 800366e + { + len = ep->maxpacket; + 8003662: 463b mov r3, r7 + 8003664: 681b ldr r3, [r3, #0] + 8003666: 691b ldr r3, [r3, #16] + 8003668: f8c7 310c str.w r3, [r7, #268] ; 0x10c + 800366c: e004 b.n 8003678 + } + else + { + len = ep->xfer_len; + 800366e: 463b mov r3, r7 + 8003670: 681b ldr r3, [r3, #0] + 8003672: 699b ldr r3, [r3, #24] + 8003674: f8c7 310c str.w r3, [r7, #268] ; 0x10c + } + + /* configure and validate Tx endpoint */ + if (ep->doublebuffer == 0U) + 8003678: 463b mov r3, r7 + 800367a: 681b ldr r3, [r3, #0] + 800367c: 7b1b ldrb r3, [r3, #12] + 800367e: 2b00 cmp r3, #0 + 8003680: d12c bne.n 80036dc + { + USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len); + 8003682: 463b mov r3, r7 + 8003684: 681b ldr r3, [r3, #0] + 8003686: 6959 ldr r1, [r3, #20] + 8003688: 463b mov r3, r7 + 800368a: 681b ldr r3, [r3, #0] + 800368c: 88da ldrh r2, [r3, #6] + 800368e: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003692: b29b uxth r3, r3 + 8003694: 1d38 adds r0, r7, #4 + 8003696: 6800 ldr r0, [r0, #0] + 8003698: f001 fa2c bl 8004af4 + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + 800369c: 1d3b adds r3, r7, #4 + 800369e: 681b ldr r3, [r3, #0] + 80036a0: 617b str r3, [r7, #20] + 80036a2: 1d3b adds r3, r7, #4 + 80036a4: 681b ldr r3, [r3, #0] + 80036a6: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80036aa: b29b uxth r3, r3 + 80036ac: 461a mov r2, r3 + 80036ae: 697b ldr r3, [r7, #20] + 80036b0: 4413 add r3, r2 + 80036b2: 617b str r3, [r7, #20] + 80036b4: 463b mov r3, r7 + 80036b6: 681b ldr r3, [r3, #0] + 80036b8: 781b ldrb r3, [r3, #0] + 80036ba: 011a lsls r2, r3, #4 + 80036bc: 697b ldr r3, [r7, #20] + 80036be: 4413 add r3, r2 + 80036c0: f203 4204 addw r2, r3, #1028 ; 0x404 + 80036c4: f107 0310 add.w r3, r7, #16 + 80036c8: 601a str r2, [r3, #0] + 80036ca: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80036ce: b29a uxth r2, r3 + 80036d0: f107 0310 add.w r3, r7, #16 + 80036d4: 681b ldr r3, [r3, #0] + 80036d6: 801a strh r2, [r3, #0] + 80036d8: f000 bcdd b.w 8004096 + } + else + { + /* double buffer bulk management */ + if (ep->type == EP_TYPE_BULK) + 80036dc: 463b mov r3, r7 + 80036de: 681b ldr r3, [r3, #0] + 80036e0: 78db ldrb r3, [r3, #3] + 80036e2: 2b02 cmp r3, #2 + 80036e4: f040 8347 bne.w 8003d76 + { + if (ep->xfer_len_db > ep->maxpacket) + 80036e8: 463b mov r3, r7 + 80036ea: 681b ldr r3, [r3, #0] + 80036ec: 6a1a ldr r2, [r3, #32] + 80036ee: 463b mov r3, r7 + 80036f0: 681b ldr r3, [r3, #0] + 80036f2: 691b ldr r3, [r3, #16] + 80036f4: 429a cmp r2, r3 + 80036f6: f240 82eb bls.w 8003cd0 + { + /* enable double buffer */ + PCD_SET_EP_DBUF(USBx, ep->num); + 80036fa: 1d3b adds r3, r7, #4 + 80036fc: 681a ldr r2, [r3, #0] + 80036fe: 463b mov r3, r7 + 8003700: 681b ldr r3, [r3, #0] + 8003702: 781b ldrb r3, [r3, #0] + 8003704: 009b lsls r3, r3, #2 + 8003706: 4413 add r3, r2 + 8003708: 881b ldrh r3, [r3, #0] + 800370a: b29b uxth r3, r3 + 800370c: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8003710: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003714: f8a7 305a strh.w r3, [r7, #90] ; 0x5a + 8003718: 1d3b adds r3, r7, #4 + 800371a: 681a ldr r2, [r3, #0] + 800371c: 463b mov r3, r7 + 800371e: 681b ldr r3, [r3, #0] + 8003720: 781b ldrb r3, [r3, #0] + 8003722: 009b lsls r3, r3, #2 + 8003724: 441a add r2, r3 + 8003726: f8b7 305a ldrh.w r3, [r7, #90] ; 0x5a + 800372a: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800372e: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003732: f443 4301 orr.w r3, r3, #33024 ; 0x8100 + 8003736: f043 0380 orr.w r3, r3, #128 ; 0x80 + 800373a: b29b uxth r3, r3 + 800373c: 8013 strh r3, [r2, #0] + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + 800373e: 463b mov r3, r7 + 8003740: 681b ldr r3, [r3, #0] + 8003742: 6a1a ldr r2, [r3, #32] + 8003744: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003748: 1ad2 subs r2, r2, r3 + 800374a: 463b mov r3, r7 + 800374c: 681b ldr r3, [r3, #0] + 800374e: 621a str r2, [r3, #32] + + /* Fill the two first buffer in the Buffer0 & Buffer1 */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + 8003750: 1d3b adds r3, r7, #4 + 8003752: 681a ldr r2, [r3, #0] + 8003754: 463b mov r3, r7 + 8003756: 681b ldr r3, [r3, #0] + 8003758: 781b ldrb r3, [r3, #0] + 800375a: 009b lsls r3, r3, #2 + 800375c: 4413 add r3, r2 + 800375e: 881b ldrh r3, [r3, #0] + 8003760: b29b uxth r3, r3 + 8003762: f003 0340 and.w r3, r3, #64 ; 0x40 + 8003766: 2b00 cmp r3, #0 + 8003768: f000 8159 beq.w 8003a1e + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + 800376c: 1d3b adds r3, r7, #4 + 800376e: 681b ldr r3, [r3, #0] + 8003770: 637b str r3, [r7, #52] ; 0x34 + 8003772: 463b mov r3, r7 + 8003774: 681b ldr r3, [r3, #0] + 8003776: 785b ldrb r3, [r3, #1] + 8003778: 2b00 cmp r3, #0 + 800377a: d164 bne.n 8003846 + 800377c: 1d3b adds r3, r7, #4 + 800377e: 681b ldr r3, [r3, #0] + 8003780: 62fb str r3, [r7, #44] ; 0x2c + 8003782: 1d3b adds r3, r7, #4 + 8003784: 681b ldr r3, [r3, #0] + 8003786: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 800378a: b29b uxth r3, r3 + 800378c: 461a mov r2, r3 + 800378e: 6afb ldr r3, [r7, #44] ; 0x2c + 8003790: 4413 add r3, r2 + 8003792: 62fb str r3, [r7, #44] ; 0x2c + 8003794: 463b mov r3, r7 + 8003796: 681b ldr r3, [r3, #0] + 8003798: 781b ldrb r3, [r3, #0] + 800379a: 011a lsls r2, r3, #4 + 800379c: 6afb ldr r3, [r7, #44] ; 0x2c + 800379e: 4413 add r3, r2 + 80037a0: f203 430c addw r3, r3, #1036 ; 0x40c + 80037a4: 62bb str r3, [r7, #40] ; 0x28 + 80037a6: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80037aa: 2b00 cmp r3, #0 + 80037ac: d112 bne.n 80037d4 + 80037ae: 6abb ldr r3, [r7, #40] ; 0x28 + 80037b0: 881b ldrh r3, [r3, #0] + 80037b2: b29b uxth r3, r3 + 80037b4: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 80037b8: b29a uxth r2, r3 + 80037ba: 6abb ldr r3, [r7, #40] ; 0x28 + 80037bc: 801a strh r2, [r3, #0] + 80037be: 6abb ldr r3, [r7, #40] ; 0x28 + 80037c0: 881b ldrh r3, [r3, #0] + 80037c2: b29b uxth r3, r3 + 80037c4: ea6f 4343 mvn.w r3, r3, lsl #17 + 80037c8: ea6f 4353 mvn.w r3, r3, lsr #17 + 80037cc: b29a uxth r2, r3 + 80037ce: 6abb ldr r3, [r7, #40] ; 0x28 + 80037d0: 801a strh r2, [r3, #0] + 80037d2: e054 b.n 800387e + 80037d4: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80037d8: 2b3e cmp r3, #62 ; 0x3e + 80037da: d817 bhi.n 800380c + 80037dc: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80037e0: 085b lsrs r3, r3, #1 + 80037e2: f8c7 3104 str.w r3, [r7, #260] ; 0x104 + 80037e6: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80037ea: f003 0301 and.w r3, r3, #1 + 80037ee: 2b00 cmp r3, #0 + 80037f0: d004 beq.n 80037fc + 80037f2: f8d7 3104 ldr.w r3, [r7, #260] ; 0x104 + 80037f6: 3301 adds r3, #1 + 80037f8: f8c7 3104 str.w r3, [r7, #260] ; 0x104 + 80037fc: f8d7 3104 ldr.w r3, [r7, #260] ; 0x104 + 8003800: b29b uxth r3, r3 + 8003802: 029b lsls r3, r3, #10 + 8003804: b29a uxth r2, r3 + 8003806: 6abb ldr r3, [r7, #40] ; 0x28 + 8003808: 801a strh r2, [r3, #0] + 800380a: e038 b.n 800387e + 800380c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003810: 095b lsrs r3, r3, #5 + 8003812: f8c7 3104 str.w r3, [r7, #260] ; 0x104 + 8003816: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 800381a: f003 031f and.w r3, r3, #31 + 800381e: 2b00 cmp r3, #0 + 8003820: d104 bne.n 800382c + 8003822: f8d7 3104 ldr.w r3, [r7, #260] ; 0x104 + 8003826: 3b01 subs r3, #1 + 8003828: f8c7 3104 str.w r3, [r7, #260] ; 0x104 + 800382c: f8d7 3104 ldr.w r3, [r7, #260] ; 0x104 + 8003830: b29b uxth r3, r3 + 8003832: 029b lsls r3, r3, #10 + 8003834: b29b uxth r3, r3 + 8003836: ea6f 4343 mvn.w r3, r3, lsl #17 + 800383a: ea6f 4353 mvn.w r3, r3, lsr #17 + 800383e: b29a uxth r2, r3 + 8003840: 6abb ldr r3, [r7, #40] ; 0x28 + 8003842: 801a strh r2, [r3, #0] + 8003844: e01b b.n 800387e + 8003846: 463b mov r3, r7 + 8003848: 681b ldr r3, [r3, #0] + 800384a: 785b ldrb r3, [r3, #1] + 800384c: 2b01 cmp r3, #1 + 800384e: d116 bne.n 800387e + 8003850: 1d3b adds r3, r7, #4 + 8003852: 681b ldr r3, [r3, #0] + 8003854: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003858: b29b uxth r3, r3 + 800385a: 461a mov r2, r3 + 800385c: 6b7b ldr r3, [r7, #52] ; 0x34 + 800385e: 4413 add r3, r2 + 8003860: 637b str r3, [r7, #52] ; 0x34 + 8003862: 463b mov r3, r7 + 8003864: 681b ldr r3, [r3, #0] + 8003866: 781b ldrb r3, [r3, #0] + 8003868: 011a lsls r2, r3, #4 + 800386a: 6b7b ldr r3, [r7, #52] ; 0x34 + 800386c: 4413 add r3, r2 + 800386e: f203 430c addw r3, r3, #1036 ; 0x40c + 8003872: 633b str r3, [r7, #48] ; 0x30 + 8003874: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003878: b29a uxth r2, r3 + 800387a: 6b3b ldr r3, [r7, #48] ; 0x30 + 800387c: 801a strh r2, [r3, #0] + pmabuffer = ep->pmaaddr1; + 800387e: 463b mov r3, r7 + 8003880: 681b ldr r3, [r3, #0] + 8003882: 895b ldrh r3, [r3, #10] + 8003884: f8a7 310a strh.w r3, [r7, #266] ; 0x10a + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + 8003888: 463b mov r3, r7 + 800388a: 681b ldr r3, [r3, #0] + 800388c: 6959 ldr r1, [r3, #20] + 800388e: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003892: b29b uxth r3, r3 + 8003894: f8b7 210a ldrh.w r2, [r7, #266] ; 0x10a + 8003898: 1d38 adds r0, r7, #4 + 800389a: 6800 ldr r0, [r0, #0] + 800389c: f001 f92a bl 8004af4 + ep->xfer_buff += len; + 80038a0: 463b mov r3, r7 + 80038a2: 681b ldr r3, [r3, #0] + 80038a4: 695a ldr r2, [r3, #20] + 80038a6: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80038aa: 441a add r2, r3 + 80038ac: 463b mov r3, r7 + 80038ae: 681b ldr r3, [r3, #0] + 80038b0: 615a str r2, [r3, #20] + + if (ep->xfer_len_db > ep->maxpacket) + 80038b2: 463b mov r3, r7 + 80038b4: 681b ldr r3, [r3, #0] + 80038b6: 6a1a ldr r2, [r3, #32] + 80038b8: 463b mov r3, r7 + 80038ba: 681b ldr r3, [r3, #0] + 80038bc: 691b ldr r3, [r3, #16] + 80038be: 429a cmp r2, r3 + 80038c0: d909 bls.n 80038d6 + { + ep->xfer_len_db -= len; + 80038c2: 463b mov r3, r7 + 80038c4: 681b ldr r3, [r3, #0] + 80038c6: 6a1a ldr r2, [r3, #32] + 80038c8: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80038cc: 1ad2 subs r2, r2, r3 + 80038ce: 463b mov r3, r7 + 80038d0: 681b ldr r3, [r3, #0] + 80038d2: 621a str r2, [r3, #32] + 80038d4: e008 b.n 80038e8 + } + else + { + len = ep->xfer_len_db; + 80038d6: 463b mov r3, r7 + 80038d8: 681b ldr r3, [r3, #0] + 80038da: 6a1b ldr r3, [r3, #32] + 80038dc: f8c7 310c str.w r3, [r7, #268] ; 0x10c + ep->xfer_len_db = 0U; + 80038e0: 463b mov r3, r7 + 80038e2: 681b ldr r3, [r3, #0] + 80038e4: 2200 movs r2, #0 + 80038e6: 621a str r2, [r3, #32] + } + + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + 80038e8: 463b mov r3, r7 + 80038ea: 681b ldr r3, [r3, #0] + 80038ec: 785b ldrb r3, [r3, #1] + 80038ee: 2b00 cmp r3, #0 + 80038f0: d164 bne.n 80039bc + 80038f2: 1d3b adds r3, r7, #4 + 80038f4: 681b ldr r3, [r3, #0] + 80038f6: 61fb str r3, [r7, #28] + 80038f8: 1d3b adds r3, r7, #4 + 80038fa: 681b ldr r3, [r3, #0] + 80038fc: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003900: b29b uxth r3, r3 + 8003902: 461a mov r2, r3 + 8003904: 69fb ldr r3, [r7, #28] + 8003906: 4413 add r3, r2 + 8003908: 61fb str r3, [r7, #28] + 800390a: 463b mov r3, r7 + 800390c: 681b ldr r3, [r3, #0] + 800390e: 781b ldrb r3, [r3, #0] + 8003910: 011a lsls r2, r3, #4 + 8003912: 69fb ldr r3, [r7, #28] + 8003914: 4413 add r3, r2 + 8003916: f203 4304 addw r3, r3, #1028 ; 0x404 + 800391a: 61bb str r3, [r7, #24] + 800391c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003920: 2b00 cmp r3, #0 + 8003922: d112 bne.n 800394a + 8003924: 69bb ldr r3, [r7, #24] + 8003926: 881b ldrh r3, [r3, #0] + 8003928: b29b uxth r3, r3 + 800392a: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 800392e: b29a uxth r2, r3 + 8003930: 69bb ldr r3, [r7, #24] + 8003932: 801a strh r2, [r3, #0] + 8003934: 69bb ldr r3, [r7, #24] + 8003936: 881b ldrh r3, [r3, #0] + 8003938: b29b uxth r3, r3 + 800393a: ea6f 4343 mvn.w r3, r3, lsl #17 + 800393e: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003942: b29a uxth r2, r3 + 8003944: 69bb ldr r3, [r7, #24] + 8003946: 801a strh r2, [r3, #0] + 8003948: e057 b.n 80039fa + 800394a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 800394e: 2b3e cmp r3, #62 ; 0x3e + 8003950: d817 bhi.n 8003982 + 8003952: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003956: 085b lsrs r3, r3, #1 + 8003958: f8c7 3100 str.w r3, [r7, #256] ; 0x100 + 800395c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003960: f003 0301 and.w r3, r3, #1 + 8003964: 2b00 cmp r3, #0 + 8003966: d004 beq.n 8003972 + 8003968: f8d7 3100 ldr.w r3, [r7, #256] ; 0x100 + 800396c: 3301 adds r3, #1 + 800396e: f8c7 3100 str.w r3, [r7, #256] ; 0x100 + 8003972: f8d7 3100 ldr.w r3, [r7, #256] ; 0x100 + 8003976: b29b uxth r3, r3 + 8003978: 029b lsls r3, r3, #10 + 800397a: b29a uxth r2, r3 + 800397c: 69bb ldr r3, [r7, #24] + 800397e: 801a strh r2, [r3, #0] + 8003980: e03b b.n 80039fa + 8003982: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003986: 095b lsrs r3, r3, #5 + 8003988: f8c7 3100 str.w r3, [r7, #256] ; 0x100 + 800398c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003990: f003 031f and.w r3, r3, #31 + 8003994: 2b00 cmp r3, #0 + 8003996: d104 bne.n 80039a2 + 8003998: f8d7 3100 ldr.w r3, [r7, #256] ; 0x100 + 800399c: 3b01 subs r3, #1 + 800399e: f8c7 3100 str.w r3, [r7, #256] ; 0x100 + 80039a2: f8d7 3100 ldr.w r3, [r7, #256] ; 0x100 + 80039a6: b29b uxth r3, r3 + 80039a8: 029b lsls r3, r3, #10 + 80039aa: b29b uxth r3, r3 + 80039ac: ea6f 4343 mvn.w r3, r3, lsl #17 + 80039b0: ea6f 4353 mvn.w r3, r3, lsr #17 + 80039b4: b29a uxth r2, r3 + 80039b6: 69bb ldr r3, [r7, #24] + 80039b8: 801a strh r2, [r3, #0] + 80039ba: e01e b.n 80039fa + 80039bc: 463b mov r3, r7 + 80039be: 681b ldr r3, [r3, #0] + 80039c0: 785b ldrb r3, [r3, #1] + 80039c2: 2b01 cmp r3, #1 + 80039c4: d119 bne.n 80039fa + 80039c6: 1d3b adds r3, r7, #4 + 80039c8: 681b ldr r3, [r3, #0] + 80039ca: 627b str r3, [r7, #36] ; 0x24 + 80039cc: 1d3b adds r3, r7, #4 + 80039ce: 681b ldr r3, [r3, #0] + 80039d0: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80039d4: b29b uxth r3, r3 + 80039d6: 461a mov r2, r3 + 80039d8: 6a7b ldr r3, [r7, #36] ; 0x24 + 80039da: 4413 add r3, r2 + 80039dc: 627b str r3, [r7, #36] ; 0x24 + 80039de: 463b mov r3, r7 + 80039e0: 681b ldr r3, [r3, #0] + 80039e2: 781b ldrb r3, [r3, #0] + 80039e4: 011a lsls r2, r3, #4 + 80039e6: 6a7b ldr r3, [r7, #36] ; 0x24 + 80039e8: 4413 add r3, r2 + 80039ea: f203 4304 addw r3, r3, #1028 ; 0x404 + 80039ee: 623b str r3, [r7, #32] + 80039f0: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80039f4: b29a uxth r2, r3 + 80039f6: 6a3b ldr r3, [r7, #32] + 80039f8: 801a strh r2, [r3, #0] + pmabuffer = ep->pmaaddr0; + 80039fa: 463b mov r3, r7 + 80039fc: 681b ldr r3, [r3, #0] + 80039fe: 891b ldrh r3, [r3, #8] + 8003a00: f8a7 310a strh.w r3, [r7, #266] ; 0x10a + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + 8003a04: 463b mov r3, r7 + 8003a06: 681b ldr r3, [r3, #0] + 8003a08: 6959 ldr r1, [r3, #20] + 8003a0a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003a0e: b29b uxth r3, r3 + 8003a10: f8b7 210a ldrh.w r2, [r7, #266] ; 0x10a + 8003a14: 1d38 adds r0, r7, #4 + 8003a16: 6800 ldr r0, [r0, #0] + 8003a18: f001 f86c bl 8004af4 + 8003a1c: e33b b.n 8004096 + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + 8003a1e: 463b mov r3, r7 + 8003a20: 681b ldr r3, [r3, #0] + 8003a22: 785b ldrb r3, [r3, #1] + 8003a24: 2b00 cmp r3, #0 + 8003a26: d164 bne.n 8003af2 + 8003a28: 1d3b adds r3, r7, #4 + 8003a2a: 681b ldr r3, [r3, #0] + 8003a2c: 64fb str r3, [r7, #76] ; 0x4c + 8003a2e: 1d3b adds r3, r7, #4 + 8003a30: 681b ldr r3, [r3, #0] + 8003a32: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003a36: b29b uxth r3, r3 + 8003a38: 461a mov r2, r3 + 8003a3a: 6cfb ldr r3, [r7, #76] ; 0x4c + 8003a3c: 4413 add r3, r2 + 8003a3e: 64fb str r3, [r7, #76] ; 0x4c + 8003a40: 463b mov r3, r7 + 8003a42: 681b ldr r3, [r3, #0] + 8003a44: 781b ldrb r3, [r3, #0] + 8003a46: 011a lsls r2, r3, #4 + 8003a48: 6cfb ldr r3, [r7, #76] ; 0x4c + 8003a4a: 4413 add r3, r2 + 8003a4c: f203 4304 addw r3, r3, #1028 ; 0x404 + 8003a50: 64bb str r3, [r7, #72] ; 0x48 + 8003a52: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003a56: 2b00 cmp r3, #0 + 8003a58: d112 bne.n 8003a80 + 8003a5a: 6cbb ldr r3, [r7, #72] ; 0x48 + 8003a5c: 881b ldrh r3, [r3, #0] + 8003a5e: b29b uxth r3, r3 + 8003a60: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8003a64: b29a uxth r2, r3 + 8003a66: 6cbb ldr r3, [r7, #72] ; 0x48 + 8003a68: 801a strh r2, [r3, #0] + 8003a6a: 6cbb ldr r3, [r7, #72] ; 0x48 + 8003a6c: 881b ldrh r3, [r3, #0] + 8003a6e: b29b uxth r3, r3 + 8003a70: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003a74: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003a78: b29a uxth r2, r3 + 8003a7a: 6cbb ldr r3, [r7, #72] ; 0x48 + 8003a7c: 801a strh r2, [r3, #0] + 8003a7e: e057 b.n 8003b30 + 8003a80: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003a84: 2b3e cmp r3, #62 ; 0x3e + 8003a86: d817 bhi.n 8003ab8 + 8003a88: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003a8c: 085b lsrs r3, r3, #1 + 8003a8e: f8c7 30fc str.w r3, [r7, #252] ; 0xfc + 8003a92: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003a96: f003 0301 and.w r3, r3, #1 + 8003a9a: 2b00 cmp r3, #0 + 8003a9c: d004 beq.n 8003aa8 + 8003a9e: f8d7 30fc ldr.w r3, [r7, #252] ; 0xfc + 8003aa2: 3301 adds r3, #1 + 8003aa4: f8c7 30fc str.w r3, [r7, #252] ; 0xfc + 8003aa8: f8d7 30fc ldr.w r3, [r7, #252] ; 0xfc + 8003aac: b29b uxth r3, r3 + 8003aae: 029b lsls r3, r3, #10 + 8003ab0: b29a uxth r2, r3 + 8003ab2: 6cbb ldr r3, [r7, #72] ; 0x48 + 8003ab4: 801a strh r2, [r3, #0] + 8003ab6: e03b b.n 8003b30 + 8003ab8: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003abc: 095b lsrs r3, r3, #5 + 8003abe: f8c7 30fc str.w r3, [r7, #252] ; 0xfc + 8003ac2: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003ac6: f003 031f and.w r3, r3, #31 + 8003aca: 2b00 cmp r3, #0 + 8003acc: d104 bne.n 8003ad8 + 8003ace: f8d7 30fc ldr.w r3, [r7, #252] ; 0xfc + 8003ad2: 3b01 subs r3, #1 + 8003ad4: f8c7 30fc str.w r3, [r7, #252] ; 0xfc + 8003ad8: f8d7 30fc ldr.w r3, [r7, #252] ; 0xfc + 8003adc: b29b uxth r3, r3 + 8003ade: 029b lsls r3, r3, #10 + 8003ae0: b29b uxth r3, r3 + 8003ae2: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003ae6: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003aea: b29a uxth r2, r3 + 8003aec: 6cbb ldr r3, [r7, #72] ; 0x48 + 8003aee: 801a strh r2, [r3, #0] + 8003af0: e01e b.n 8003b30 + 8003af2: 463b mov r3, r7 + 8003af4: 681b ldr r3, [r3, #0] + 8003af6: 785b ldrb r3, [r3, #1] + 8003af8: 2b01 cmp r3, #1 + 8003afa: d119 bne.n 8003b30 + 8003afc: 1d3b adds r3, r7, #4 + 8003afe: 681b ldr r3, [r3, #0] + 8003b00: 657b str r3, [r7, #84] ; 0x54 + 8003b02: 1d3b adds r3, r7, #4 + 8003b04: 681b ldr r3, [r3, #0] + 8003b06: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003b0a: b29b uxth r3, r3 + 8003b0c: 461a mov r2, r3 + 8003b0e: 6d7b ldr r3, [r7, #84] ; 0x54 + 8003b10: 4413 add r3, r2 + 8003b12: 657b str r3, [r7, #84] ; 0x54 + 8003b14: 463b mov r3, r7 + 8003b16: 681b ldr r3, [r3, #0] + 8003b18: 781b ldrb r3, [r3, #0] + 8003b1a: 011a lsls r2, r3, #4 + 8003b1c: 6d7b ldr r3, [r7, #84] ; 0x54 + 8003b1e: 4413 add r3, r2 + 8003b20: f203 4304 addw r3, r3, #1028 ; 0x404 + 8003b24: 653b str r3, [r7, #80] ; 0x50 + 8003b26: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003b2a: b29a uxth r2, r3 + 8003b2c: 6d3b ldr r3, [r7, #80] ; 0x50 + 8003b2e: 801a strh r2, [r3, #0] + pmabuffer = ep->pmaaddr0; + 8003b30: 463b mov r3, r7 + 8003b32: 681b ldr r3, [r3, #0] + 8003b34: 891b ldrh r3, [r3, #8] + 8003b36: f8a7 310a strh.w r3, [r7, #266] ; 0x10a + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + 8003b3a: 463b mov r3, r7 + 8003b3c: 681b ldr r3, [r3, #0] + 8003b3e: 6959 ldr r1, [r3, #20] + 8003b40: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003b44: b29b uxth r3, r3 + 8003b46: f8b7 210a ldrh.w r2, [r7, #266] ; 0x10a + 8003b4a: 1d38 adds r0, r7, #4 + 8003b4c: 6800 ldr r0, [r0, #0] + 8003b4e: f000 ffd1 bl 8004af4 + ep->xfer_buff += len; + 8003b52: 463b mov r3, r7 + 8003b54: 681b ldr r3, [r3, #0] + 8003b56: 695a ldr r2, [r3, #20] + 8003b58: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003b5c: 441a add r2, r3 + 8003b5e: 463b mov r3, r7 + 8003b60: 681b ldr r3, [r3, #0] + 8003b62: 615a str r2, [r3, #20] + + if (ep->xfer_len_db > ep->maxpacket) + 8003b64: 463b mov r3, r7 + 8003b66: 681b ldr r3, [r3, #0] + 8003b68: 6a1a ldr r2, [r3, #32] + 8003b6a: 463b mov r3, r7 + 8003b6c: 681b ldr r3, [r3, #0] + 8003b6e: 691b ldr r3, [r3, #16] + 8003b70: 429a cmp r2, r3 + 8003b72: d909 bls.n 8003b88 + { + ep->xfer_len_db -= len; + 8003b74: 463b mov r3, r7 + 8003b76: 681b ldr r3, [r3, #0] + 8003b78: 6a1a ldr r2, [r3, #32] + 8003b7a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003b7e: 1ad2 subs r2, r2, r3 + 8003b80: 463b mov r3, r7 + 8003b82: 681b ldr r3, [r3, #0] + 8003b84: 621a str r2, [r3, #32] + 8003b86: e008 b.n 8003b9a + } + else + { + len = ep->xfer_len_db; + 8003b88: 463b mov r3, r7 + 8003b8a: 681b ldr r3, [r3, #0] + 8003b8c: 6a1b ldr r3, [r3, #32] + 8003b8e: f8c7 310c str.w r3, [r7, #268] ; 0x10c + ep->xfer_len_db = 0U; + 8003b92: 463b mov r3, r7 + 8003b94: 681b ldr r3, [r3, #0] + 8003b96: 2200 movs r2, #0 + 8003b98: 621a str r2, [r3, #32] + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + 8003b9a: 1d3b adds r3, r7, #4 + 8003b9c: 681b ldr r3, [r3, #0] + 8003b9e: 647b str r3, [r7, #68] ; 0x44 + 8003ba0: 463b mov r3, r7 + 8003ba2: 681b ldr r3, [r3, #0] + 8003ba4: 785b ldrb r3, [r3, #1] + 8003ba6: 2b00 cmp r3, #0 + 8003ba8: d164 bne.n 8003c74 + 8003baa: 1d3b adds r3, r7, #4 + 8003bac: 681b ldr r3, [r3, #0] + 8003bae: 63fb str r3, [r7, #60] ; 0x3c + 8003bb0: 1d3b adds r3, r7, #4 + 8003bb2: 681b ldr r3, [r3, #0] + 8003bb4: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003bb8: b29b uxth r3, r3 + 8003bba: 461a mov r2, r3 + 8003bbc: 6bfb ldr r3, [r7, #60] ; 0x3c + 8003bbe: 4413 add r3, r2 + 8003bc0: 63fb str r3, [r7, #60] ; 0x3c + 8003bc2: 463b mov r3, r7 + 8003bc4: 681b ldr r3, [r3, #0] + 8003bc6: 781b ldrb r3, [r3, #0] + 8003bc8: 011a lsls r2, r3, #4 + 8003bca: 6bfb ldr r3, [r7, #60] ; 0x3c + 8003bcc: 4413 add r3, r2 + 8003bce: f203 430c addw r3, r3, #1036 ; 0x40c + 8003bd2: 63bb str r3, [r7, #56] ; 0x38 + 8003bd4: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003bd8: 2b00 cmp r3, #0 + 8003bda: d112 bne.n 8003c02 + 8003bdc: 6bbb ldr r3, [r7, #56] ; 0x38 + 8003bde: 881b ldrh r3, [r3, #0] + 8003be0: b29b uxth r3, r3 + 8003be2: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8003be6: b29a uxth r2, r3 + 8003be8: 6bbb ldr r3, [r7, #56] ; 0x38 + 8003bea: 801a strh r2, [r3, #0] + 8003bec: 6bbb ldr r3, [r7, #56] ; 0x38 + 8003bee: 881b ldrh r3, [r3, #0] + 8003bf0: b29b uxth r3, r3 + 8003bf2: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003bf6: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003bfa: b29a uxth r2, r3 + 8003bfc: 6bbb ldr r3, [r7, #56] ; 0x38 + 8003bfe: 801a strh r2, [r3, #0] + 8003c00: e054 b.n 8003cac + 8003c02: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003c06: 2b3e cmp r3, #62 ; 0x3e + 8003c08: d817 bhi.n 8003c3a + 8003c0a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003c0e: 085b lsrs r3, r3, #1 + 8003c10: f8c7 30f8 str.w r3, [r7, #248] ; 0xf8 + 8003c14: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003c18: f003 0301 and.w r3, r3, #1 + 8003c1c: 2b00 cmp r3, #0 + 8003c1e: d004 beq.n 8003c2a + 8003c20: f8d7 30f8 ldr.w r3, [r7, #248] ; 0xf8 + 8003c24: 3301 adds r3, #1 + 8003c26: f8c7 30f8 str.w r3, [r7, #248] ; 0xf8 + 8003c2a: f8d7 30f8 ldr.w r3, [r7, #248] ; 0xf8 + 8003c2e: b29b uxth r3, r3 + 8003c30: 029b lsls r3, r3, #10 + 8003c32: b29a uxth r2, r3 + 8003c34: 6bbb ldr r3, [r7, #56] ; 0x38 + 8003c36: 801a strh r2, [r3, #0] + 8003c38: e038 b.n 8003cac + 8003c3a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003c3e: 095b lsrs r3, r3, #5 + 8003c40: f8c7 30f8 str.w r3, [r7, #248] ; 0xf8 + 8003c44: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003c48: f003 031f and.w r3, r3, #31 + 8003c4c: 2b00 cmp r3, #0 + 8003c4e: d104 bne.n 8003c5a + 8003c50: f8d7 30f8 ldr.w r3, [r7, #248] ; 0xf8 + 8003c54: 3b01 subs r3, #1 + 8003c56: f8c7 30f8 str.w r3, [r7, #248] ; 0xf8 + 8003c5a: f8d7 30f8 ldr.w r3, [r7, #248] ; 0xf8 + 8003c5e: b29b uxth r3, r3 + 8003c60: 029b lsls r3, r3, #10 + 8003c62: b29b uxth r3, r3 + 8003c64: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003c68: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003c6c: b29a uxth r2, r3 + 8003c6e: 6bbb ldr r3, [r7, #56] ; 0x38 + 8003c70: 801a strh r2, [r3, #0] + 8003c72: e01b b.n 8003cac + 8003c74: 463b mov r3, r7 + 8003c76: 681b ldr r3, [r3, #0] + 8003c78: 785b ldrb r3, [r3, #1] + 8003c7a: 2b01 cmp r3, #1 + 8003c7c: d116 bne.n 8003cac + 8003c7e: 1d3b adds r3, r7, #4 + 8003c80: 681b ldr r3, [r3, #0] + 8003c82: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003c86: b29b uxth r3, r3 + 8003c88: 461a mov r2, r3 + 8003c8a: 6c7b ldr r3, [r7, #68] ; 0x44 + 8003c8c: 4413 add r3, r2 + 8003c8e: 647b str r3, [r7, #68] ; 0x44 + 8003c90: 463b mov r3, r7 + 8003c92: 681b ldr r3, [r3, #0] + 8003c94: 781b ldrb r3, [r3, #0] + 8003c96: 011a lsls r2, r3, #4 + 8003c98: 6c7b ldr r3, [r7, #68] ; 0x44 + 8003c9a: 4413 add r3, r2 + 8003c9c: f203 430c addw r3, r3, #1036 ; 0x40c + 8003ca0: 643b str r3, [r7, #64] ; 0x40 + 8003ca2: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003ca6: b29a uxth r2, r3 + 8003ca8: 6c3b ldr r3, [r7, #64] ; 0x40 + 8003caa: 801a strh r2, [r3, #0] + pmabuffer = ep->pmaaddr1; + 8003cac: 463b mov r3, r7 + 8003cae: 681b ldr r3, [r3, #0] + 8003cb0: 895b ldrh r3, [r3, #10] + 8003cb2: f8a7 310a strh.w r3, [r7, #266] ; 0x10a + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + 8003cb6: 463b mov r3, r7 + 8003cb8: 681b ldr r3, [r3, #0] + 8003cba: 6959 ldr r1, [r3, #20] + 8003cbc: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003cc0: b29b uxth r3, r3 + 8003cc2: f8b7 210a ldrh.w r2, [r7, #266] ; 0x10a + 8003cc6: 1d38 adds r0, r7, #4 + 8003cc8: 6800 ldr r0, [r0, #0] + 8003cca: f000 ff13 bl 8004af4 + 8003cce: e1e2 b.n 8004096 + } + } + /* auto Switch to single buffer mode when transfer xfer_len_db; + 8003cd0: 463b mov r3, r7 + 8003cd2: 681b ldr r3, [r3, #0] + 8003cd4: 6a1b ldr r3, [r3, #32] + 8003cd6: f8c7 310c str.w r3, [r7, #268] ; 0x10c + + /* disable double buffer mode */ + PCD_CLEAR_EP_DBUF(USBx, ep->num); + 8003cda: 1d3b adds r3, r7, #4 + 8003cdc: 681a ldr r2, [r3, #0] + 8003cde: 463b mov r3, r7 + 8003ce0: 681b ldr r3, [r3, #0] + 8003ce2: 781b ldrb r3, [r3, #0] + 8003ce4: 009b lsls r3, r3, #2 + 8003ce6: 4413 add r3, r2 + 8003ce8: 881b ldrh r3, [r3, #0] + 8003cea: b29b uxth r3, r3 + 8003cec: f423 43e2 bic.w r3, r3, #28928 ; 0x7100 + 8003cf0: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8003cf4: f8a7 3066 strh.w r3, [r7, #102] ; 0x66 + 8003cf8: 1d3b adds r3, r7, #4 + 8003cfa: 681a ldr r2, [r3, #0] + 8003cfc: 463b mov r3, r7 + 8003cfe: 681b ldr r3, [r3, #0] + 8003d00: 781b ldrb r3, [r3, #0] + 8003d02: 009b lsls r3, r3, #2 + 8003d04: 441a add r2, r3 + 8003d06: f8b7 3066 ldrh.w r3, [r7, #102] ; 0x66 + 8003d0a: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8003d0e: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8003d12: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8003d16: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8003d1a: b29b uxth r3, r3 + 8003d1c: 8013 strh r3, [r2, #0] + + /* Set Tx count with nbre of byte to be transmitted */ + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + 8003d1e: 1d3b adds r3, r7, #4 + 8003d20: 681b ldr r3, [r3, #0] + 8003d22: 663b str r3, [r7, #96] ; 0x60 + 8003d24: 1d3b adds r3, r7, #4 + 8003d26: 681b ldr r3, [r3, #0] + 8003d28: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003d2c: b29b uxth r3, r3 + 8003d2e: 461a mov r2, r3 + 8003d30: 6e3b ldr r3, [r7, #96] ; 0x60 + 8003d32: 4413 add r3, r2 + 8003d34: 663b str r3, [r7, #96] ; 0x60 + 8003d36: 463b mov r3, r7 + 8003d38: 681b ldr r3, [r3, #0] + 8003d3a: 781b ldrb r3, [r3, #0] + 8003d3c: 011a lsls r2, r3, #4 + 8003d3e: 6e3b ldr r3, [r7, #96] ; 0x60 + 8003d40: 4413 add r3, r2 + 8003d42: f203 4304 addw r3, r3, #1028 ; 0x404 + 8003d46: 65fb str r3, [r7, #92] ; 0x5c + 8003d48: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003d4c: b29a uxth r2, r3 + 8003d4e: 6dfb ldr r3, [r7, #92] ; 0x5c + 8003d50: 801a strh r2, [r3, #0] + pmabuffer = ep->pmaaddr0; + 8003d52: 463b mov r3, r7 + 8003d54: 681b ldr r3, [r3, #0] + 8003d56: 891b ldrh r3, [r3, #8] + 8003d58: f8a7 310a strh.w r3, [r7, #266] ; 0x10a + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + 8003d5c: 463b mov r3, r7 + 8003d5e: 681b ldr r3, [r3, #0] + 8003d60: 6959 ldr r1, [r3, #20] + 8003d62: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003d66: b29b uxth r3, r3 + 8003d68: f8b7 210a ldrh.w r2, [r7, #266] ; 0x10a + 8003d6c: 1d38 adds r0, r7, #4 + 8003d6e: 6800 ldr r0, [r0, #0] + 8003d70: f000 fec0 bl 8004af4 + 8003d74: e18f b.n 8004096 + + /* manage isochronous double buffer IN mode */ + else + { + /* Write the data to the USB endpoint */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + 8003d76: 1d3b adds r3, r7, #4 + 8003d78: 681a ldr r2, [r3, #0] + 8003d7a: 463b mov r3, r7 + 8003d7c: 681b ldr r3, [r3, #0] + 8003d7e: 781b ldrb r3, [r3, #0] + 8003d80: 009b lsls r3, r3, #2 + 8003d82: 4413 add r3, r2 + 8003d84: 881b ldrh r3, [r3, #0] + 8003d86: b29b uxth r3, r3 + 8003d88: f003 0340 and.w r3, r3, #64 ; 0x40 + 8003d8c: 2b00 cmp r3, #0 + 8003d8e: f000 808f beq.w 8003eb0 + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + 8003d92: 1d3b adds r3, r7, #4 + 8003d94: 681b ldr r3, [r3, #0] + 8003d96: 67bb str r3, [r7, #120] ; 0x78 + 8003d98: 463b mov r3, r7 + 8003d9a: 681b ldr r3, [r3, #0] + 8003d9c: 785b ldrb r3, [r3, #1] + 8003d9e: 2b00 cmp r3, #0 + 8003da0: d164 bne.n 8003e6c + 8003da2: 1d3b adds r3, r7, #4 + 8003da4: 681b ldr r3, [r3, #0] + 8003da6: 673b str r3, [r7, #112] ; 0x70 + 8003da8: 1d3b adds r3, r7, #4 + 8003daa: 681b ldr r3, [r3, #0] + 8003dac: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003db0: b29b uxth r3, r3 + 8003db2: 461a mov r2, r3 + 8003db4: 6f3b ldr r3, [r7, #112] ; 0x70 + 8003db6: 4413 add r3, r2 + 8003db8: 673b str r3, [r7, #112] ; 0x70 + 8003dba: 463b mov r3, r7 + 8003dbc: 681b ldr r3, [r3, #0] + 8003dbe: 781b ldrb r3, [r3, #0] + 8003dc0: 011a lsls r2, r3, #4 + 8003dc2: 6f3b ldr r3, [r7, #112] ; 0x70 + 8003dc4: 4413 add r3, r2 + 8003dc6: f203 430c addw r3, r3, #1036 ; 0x40c + 8003dca: 66fb str r3, [r7, #108] ; 0x6c + 8003dcc: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003dd0: 2b00 cmp r3, #0 + 8003dd2: d112 bne.n 8003dfa + 8003dd4: 6efb ldr r3, [r7, #108] ; 0x6c + 8003dd6: 881b ldrh r3, [r3, #0] + 8003dd8: b29b uxth r3, r3 + 8003dda: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8003dde: b29a uxth r2, r3 + 8003de0: 6efb ldr r3, [r7, #108] ; 0x6c + 8003de2: 801a strh r2, [r3, #0] + 8003de4: 6efb ldr r3, [r7, #108] ; 0x6c + 8003de6: 881b ldrh r3, [r3, #0] + 8003de8: b29b uxth r3, r3 + 8003dea: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003dee: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003df2: b29a uxth r2, r3 + 8003df4: 6efb ldr r3, [r7, #108] ; 0x6c + 8003df6: 801a strh r2, [r3, #0] + 8003df8: e054 b.n 8003ea4 + 8003dfa: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003dfe: 2b3e cmp r3, #62 ; 0x3e + 8003e00: d817 bhi.n 8003e32 + 8003e02: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003e06: 085b lsrs r3, r3, #1 + 8003e08: f8c7 30f4 str.w r3, [r7, #244] ; 0xf4 + 8003e0c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003e10: f003 0301 and.w r3, r3, #1 + 8003e14: 2b00 cmp r3, #0 + 8003e16: d004 beq.n 8003e22 + 8003e18: f8d7 30f4 ldr.w r3, [r7, #244] ; 0xf4 + 8003e1c: 3301 adds r3, #1 + 8003e1e: f8c7 30f4 str.w r3, [r7, #244] ; 0xf4 + 8003e22: f8d7 30f4 ldr.w r3, [r7, #244] ; 0xf4 + 8003e26: b29b uxth r3, r3 + 8003e28: 029b lsls r3, r3, #10 + 8003e2a: b29a uxth r2, r3 + 8003e2c: 6efb ldr r3, [r7, #108] ; 0x6c + 8003e2e: 801a strh r2, [r3, #0] + 8003e30: e038 b.n 8003ea4 + 8003e32: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003e36: 095b lsrs r3, r3, #5 + 8003e38: f8c7 30f4 str.w r3, [r7, #244] ; 0xf4 + 8003e3c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003e40: f003 031f and.w r3, r3, #31 + 8003e44: 2b00 cmp r3, #0 + 8003e46: d104 bne.n 8003e52 + 8003e48: f8d7 30f4 ldr.w r3, [r7, #244] ; 0xf4 + 8003e4c: 3b01 subs r3, #1 + 8003e4e: f8c7 30f4 str.w r3, [r7, #244] ; 0xf4 + 8003e52: f8d7 30f4 ldr.w r3, [r7, #244] ; 0xf4 + 8003e56: b29b uxth r3, r3 + 8003e58: 029b lsls r3, r3, #10 + 8003e5a: b29b uxth r3, r3 + 8003e5c: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003e60: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003e64: b29a uxth r2, r3 + 8003e66: 6efb ldr r3, [r7, #108] ; 0x6c + 8003e68: 801a strh r2, [r3, #0] + 8003e6a: e01b b.n 8003ea4 + 8003e6c: 463b mov r3, r7 + 8003e6e: 681b ldr r3, [r3, #0] + 8003e70: 785b ldrb r3, [r3, #1] + 8003e72: 2b01 cmp r3, #1 + 8003e74: d116 bne.n 8003ea4 + 8003e76: 1d3b adds r3, r7, #4 + 8003e78: 681b ldr r3, [r3, #0] + 8003e7a: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003e7e: b29b uxth r3, r3 + 8003e80: 461a mov r2, r3 + 8003e82: 6fbb ldr r3, [r7, #120] ; 0x78 + 8003e84: 4413 add r3, r2 + 8003e86: 67bb str r3, [r7, #120] ; 0x78 + 8003e88: 463b mov r3, r7 + 8003e8a: 681b ldr r3, [r3, #0] + 8003e8c: 781b ldrb r3, [r3, #0] + 8003e8e: 011a lsls r2, r3, #4 + 8003e90: 6fbb ldr r3, [r7, #120] ; 0x78 + 8003e92: 4413 add r3, r2 + 8003e94: f203 430c addw r3, r3, #1036 ; 0x40c + 8003e98: 677b str r3, [r7, #116] ; 0x74 + 8003e9a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003e9e: b29a uxth r2, r3 + 8003ea0: 6f7b ldr r3, [r7, #116] ; 0x74 + 8003ea2: 801a strh r2, [r3, #0] + pmabuffer = ep->pmaaddr1; + 8003ea4: 463b mov r3, r7 + 8003ea6: 681b ldr r3, [r3, #0] + 8003ea8: 895b ldrh r3, [r3, #10] + 8003eaa: f8a7 310a strh.w r3, [r7, #266] ; 0x10a + 8003eae: e097 b.n 8003fe0 + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + 8003eb0: 463b mov r3, r7 + 8003eb2: 681b ldr r3, [r3, #0] + 8003eb4: 785b ldrb r3, [r3, #1] + 8003eb6: 2b00 cmp r3, #0 + 8003eb8: d168 bne.n 8003f8c + 8003eba: 1d3b adds r3, r7, #4 + 8003ebc: 681b ldr r3, [r3, #0] + 8003ebe: f8c7 3080 str.w r3, [r7, #128] ; 0x80 + 8003ec2: 1d3b adds r3, r7, #4 + 8003ec4: 681b ldr r3, [r3, #0] + 8003ec6: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003eca: b29b uxth r3, r3 + 8003ecc: 461a mov r2, r3 + 8003ece: f8d7 3080 ldr.w r3, [r7, #128] ; 0x80 + 8003ed2: 4413 add r3, r2 + 8003ed4: f8c7 3080 str.w r3, [r7, #128] ; 0x80 + 8003ed8: 463b mov r3, r7 + 8003eda: 681b ldr r3, [r3, #0] + 8003edc: 781b ldrb r3, [r3, #0] + 8003ede: 011a lsls r2, r3, #4 + 8003ee0: f8d7 3080 ldr.w r3, [r7, #128] ; 0x80 + 8003ee4: 4413 add r3, r2 + 8003ee6: f203 4304 addw r3, r3, #1028 ; 0x404 + 8003eea: 67fb str r3, [r7, #124] ; 0x7c + 8003eec: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003ef0: 2b00 cmp r3, #0 + 8003ef2: d112 bne.n 8003f1a + 8003ef4: 6ffb ldr r3, [r7, #124] ; 0x7c + 8003ef6: 881b ldrh r3, [r3, #0] + 8003ef8: b29b uxth r3, r3 + 8003efa: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8003efe: b29a uxth r2, r3 + 8003f00: 6ffb ldr r3, [r7, #124] ; 0x7c + 8003f02: 801a strh r2, [r3, #0] + 8003f04: 6ffb ldr r3, [r7, #124] ; 0x7c + 8003f06: 881b ldrh r3, [r3, #0] + 8003f08: b29b uxth r3, r3 + 8003f0a: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003f0e: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003f12: b29a uxth r2, r3 + 8003f14: 6ffb ldr r3, [r7, #124] ; 0x7c + 8003f16: 801a strh r2, [r3, #0] + 8003f18: e05d b.n 8003fd6 + 8003f1a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003f1e: 2b3e cmp r3, #62 ; 0x3e + 8003f20: d817 bhi.n 8003f52 + 8003f22: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003f26: 085b lsrs r3, r3, #1 + 8003f28: f8c7 30f0 str.w r3, [r7, #240] ; 0xf0 + 8003f2c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003f30: f003 0301 and.w r3, r3, #1 + 8003f34: 2b00 cmp r3, #0 + 8003f36: d004 beq.n 8003f42 + 8003f38: f8d7 30f0 ldr.w r3, [r7, #240] ; 0xf0 + 8003f3c: 3301 adds r3, #1 + 8003f3e: f8c7 30f0 str.w r3, [r7, #240] ; 0xf0 + 8003f42: f8d7 30f0 ldr.w r3, [r7, #240] ; 0xf0 + 8003f46: b29b uxth r3, r3 + 8003f48: 029b lsls r3, r3, #10 + 8003f4a: b29a uxth r2, r3 + 8003f4c: 6ffb ldr r3, [r7, #124] ; 0x7c + 8003f4e: 801a strh r2, [r3, #0] + 8003f50: e041 b.n 8003fd6 + 8003f52: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003f56: 095b lsrs r3, r3, #5 + 8003f58: f8c7 30f0 str.w r3, [r7, #240] ; 0xf0 + 8003f5c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003f60: f003 031f and.w r3, r3, #31 + 8003f64: 2b00 cmp r3, #0 + 8003f66: d104 bne.n 8003f72 + 8003f68: f8d7 30f0 ldr.w r3, [r7, #240] ; 0xf0 + 8003f6c: 3b01 subs r3, #1 + 8003f6e: f8c7 30f0 str.w r3, [r7, #240] ; 0xf0 + 8003f72: f8d7 30f0 ldr.w r3, [r7, #240] ; 0xf0 + 8003f76: b29b uxth r3, r3 + 8003f78: 029b lsls r3, r3, #10 + 8003f7a: b29b uxth r3, r3 + 8003f7c: ea6f 4343 mvn.w r3, r3, lsl #17 + 8003f80: ea6f 4353 mvn.w r3, r3, lsr #17 + 8003f84: b29a uxth r2, r3 + 8003f86: 6ffb ldr r3, [r7, #124] ; 0x7c + 8003f88: 801a strh r2, [r3, #0] + 8003f8a: e024 b.n 8003fd6 + 8003f8c: 463b mov r3, r7 + 8003f8e: 681b ldr r3, [r3, #0] + 8003f90: 785b ldrb r3, [r3, #1] + 8003f92: 2b01 cmp r3, #1 + 8003f94: d11f bne.n 8003fd6 + 8003f96: 1d3b adds r3, r7, #4 + 8003f98: 681b ldr r3, [r3, #0] + 8003f9a: f8c7 3088 str.w r3, [r7, #136] ; 0x88 + 8003f9e: 1d3b adds r3, r7, #4 + 8003fa0: 681b ldr r3, [r3, #0] + 8003fa2: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8003fa6: b29b uxth r3, r3 + 8003fa8: 461a mov r2, r3 + 8003faa: f8d7 3088 ldr.w r3, [r7, #136] ; 0x88 + 8003fae: 4413 add r3, r2 + 8003fb0: f8c7 3088 str.w r3, [r7, #136] ; 0x88 + 8003fb4: 463b mov r3, r7 + 8003fb6: 681b ldr r3, [r3, #0] + 8003fb8: 781b ldrb r3, [r3, #0] + 8003fba: 011a lsls r2, r3, #4 + 8003fbc: f8d7 3088 ldr.w r3, [r7, #136] ; 0x88 + 8003fc0: 4413 add r3, r2 + 8003fc2: f203 4304 addw r3, r3, #1028 ; 0x404 + 8003fc6: f8c7 3084 str.w r3, [r7, #132] ; 0x84 + 8003fca: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003fce: b29a uxth r2, r3 + 8003fd0: f8d7 3084 ldr.w r3, [r7, #132] ; 0x84 + 8003fd4: 801a strh r2, [r3, #0] + pmabuffer = ep->pmaaddr0; + 8003fd6: 463b mov r3, r7 + 8003fd8: 681b ldr r3, [r3, #0] + 8003fda: 891b ldrh r3, [r3, #8] + 8003fdc: f8a7 310a strh.w r3, [r7, #266] ; 0x10a + } + + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + 8003fe0: 463b mov r3, r7 + 8003fe2: 681b ldr r3, [r3, #0] + 8003fe4: 6959 ldr r1, [r3, #20] + 8003fe6: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8003fea: b29b uxth r3, r3 + 8003fec: f8b7 210a ldrh.w r2, [r7, #266] ; 0x10a + 8003ff0: 1d38 adds r0, r7, #4 + 8003ff2: 6800 ldr r0, [r0, #0] + 8003ff4: f000 fd7e bl 8004af4 + PCD_FreeUserBuffer(USBx, ep->num, ep->is_in); + 8003ff8: 463b mov r3, r7 + 8003ffa: 681b ldr r3, [r3, #0] + 8003ffc: 785b ldrb r3, [r3, #1] + 8003ffe: 2b00 cmp r3, #0 + 8004000: d122 bne.n 8004048 + 8004002: 1d3b adds r3, r7, #4 + 8004004: 681a ldr r2, [r3, #0] + 8004006: 463b mov r3, r7 + 8004008: 681b ldr r3, [r3, #0] + 800400a: 781b ldrb r3, [r3, #0] + 800400c: 009b lsls r3, r3, #2 + 800400e: 4413 add r3, r2 + 8004010: 881b ldrh r3, [r3, #0] + 8004012: b29b uxth r3, r3 + 8004014: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8004018: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800401c: f8a7 3068 strh.w r3, [r7, #104] ; 0x68 + 8004020: 1d3b adds r3, r7, #4 + 8004022: 681a ldr r2, [r3, #0] + 8004024: 463b mov r3, r7 + 8004026: 681b ldr r3, [r3, #0] + 8004028: 781b ldrb r3, [r3, #0] + 800402a: 009b lsls r3, r3, #2 + 800402c: 441a add r2, r3 + 800402e: f8b7 3068 ldrh.w r3, [r7, #104] ; 0x68 + 8004032: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8004036: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800403a: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 800403e: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8004042: b29b uxth r3, r3 + 8004044: 8013 strh r3, [r2, #0] + 8004046: e026 b.n 8004096 + 8004048: 463b mov r3, r7 + 800404a: 681b ldr r3, [r3, #0] + 800404c: 785b ldrb r3, [r3, #1] + 800404e: 2b01 cmp r3, #1 + 8004050: d121 bne.n 8004096 + 8004052: 1d3b adds r3, r7, #4 + 8004054: 681a ldr r2, [r3, #0] + 8004056: 463b mov r3, r7 + 8004058: 681b ldr r3, [r3, #0] + 800405a: 781b ldrb r3, [r3, #0] + 800405c: 009b lsls r3, r3, #2 + 800405e: 4413 add r3, r2 + 8004060: 881b ldrh r3, [r3, #0] + 8004062: b29b uxth r3, r3 + 8004064: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8004068: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800406c: f8a7 306a strh.w r3, [r7, #106] ; 0x6a + 8004070: 1d3b adds r3, r7, #4 + 8004072: 681a ldr r2, [r3, #0] + 8004074: 463b mov r3, r7 + 8004076: 681b ldr r3, [r3, #0] + 8004078: 781b ldrb r3, [r3, #0] + 800407a: 009b lsls r3, r3, #2 + 800407c: 441a add r2, r3 + 800407e: f8b7 306a ldrh.w r3, [r7, #106] ; 0x6a + 8004082: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8004086: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 800408a: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 800408e: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8004092: b29b uxth r3, r3 + 8004094: 8013 strh r3, [r2, #0] + } + } + + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); + 8004096: 1d3b adds r3, r7, #4 + 8004098: 681a ldr r2, [r3, #0] + 800409a: 463b mov r3, r7 + 800409c: 681b ldr r3, [r3, #0] + 800409e: 781b ldrb r3, [r3, #0] + 80040a0: 009b lsls r3, r3, #2 + 80040a2: 4413 add r3, r2 + 80040a4: 881b ldrh r3, [r3, #0] + 80040a6: b29b uxth r3, r3 + 80040a8: f107 020e add.w r2, r7, #14 + 80040ac: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80040b0: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80040b4: 8013 strh r3, [r2, #0] + 80040b6: f107 030e add.w r3, r7, #14 + 80040ba: f107 020e add.w r2, r7, #14 + 80040be: 8812 ldrh r2, [r2, #0] + 80040c0: f082 0210 eor.w r2, r2, #16 + 80040c4: 801a strh r2, [r3, #0] + 80040c6: f107 030e add.w r3, r7, #14 + 80040ca: f107 020e add.w r2, r7, #14 + 80040ce: 8812 ldrh r2, [r2, #0] + 80040d0: f082 0220 eor.w r2, r2, #32 + 80040d4: 801a strh r2, [r3, #0] + 80040d6: 1d3b adds r3, r7, #4 + 80040d8: 681a ldr r2, [r3, #0] + 80040da: 463b mov r3, r7 + 80040dc: 681b ldr r3, [r3, #0] + 80040de: 781b ldrb r3, [r3, #0] + 80040e0: 009b lsls r3, r3, #2 + 80040e2: 441a add r2, r3 + 80040e4: f107 030e add.w r3, r7, #14 + 80040e8: 881b ldrh r3, [r3, #0] + 80040ea: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80040ee: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80040f2: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80040f6: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80040fa: b29b uxth r3, r3 + 80040fc: 8013 strh r3, [r2, #0] + 80040fe: e3b5 b.n 800486c + } + else /* OUT endpoint */ + { + if (ep->doublebuffer == 0U) + 8004100: 463b mov r3, r7 + 8004102: 681b ldr r3, [r3, #0] + 8004104: 7b1b ldrb r3, [r3, #12] + 8004106: 2b00 cmp r3, #0 + 8004108: f040 8090 bne.w 800422c + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + 800410c: 463b mov r3, r7 + 800410e: 681b ldr r3, [r3, #0] + 8004110: 699a ldr r2, [r3, #24] + 8004112: 463b mov r3, r7 + 8004114: 681b ldr r3, [r3, #0] + 8004116: 691b ldr r3, [r3, #16] + 8004118: 429a cmp r2, r3 + 800411a: d90e bls.n 800413a + { + len = ep->maxpacket; + 800411c: 463b mov r3, r7 + 800411e: 681b ldr r3, [r3, #0] + 8004120: 691b ldr r3, [r3, #16] + 8004122: f8c7 310c str.w r3, [r7, #268] ; 0x10c + ep->xfer_len -= len; + 8004126: 463b mov r3, r7 + 8004128: 681b ldr r3, [r3, #0] + 800412a: 699a ldr r2, [r3, #24] + 800412c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004130: 1ad2 subs r2, r2, r3 + 8004132: 463b mov r3, r7 + 8004134: 681b ldr r3, [r3, #0] + 8004136: 619a str r2, [r3, #24] + 8004138: e008 b.n 800414c + } + else + { + len = ep->xfer_len; + 800413a: 463b mov r3, r7 + 800413c: 681b ldr r3, [r3, #0] + 800413e: 699b ldr r3, [r3, #24] + 8004140: f8c7 310c str.w r3, [r7, #268] ; 0x10c + ep->xfer_len = 0U; + 8004144: 463b mov r3, r7 + 8004146: 681b ldr r3, [r3, #0] + 8004148: 2200 movs r2, #0 + 800414a: 619a str r2, [r3, #24] + } + /* configure and validate Rx endpoint */ + PCD_SET_EP_RX_CNT(USBx, ep->num, len); + 800414c: 1d3b adds r3, r7, #4 + 800414e: 681b ldr r3, [r3, #0] + 8004150: f8c7 3094 str.w r3, [r7, #148] ; 0x94 + 8004154: 1d3b adds r3, r7, #4 + 8004156: 681b ldr r3, [r3, #0] + 8004158: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 800415c: b29b uxth r3, r3 + 800415e: 461a mov r2, r3 + 8004160: f8d7 3094 ldr.w r3, [r7, #148] ; 0x94 + 8004164: 4413 add r3, r2 + 8004166: f8c7 3094 str.w r3, [r7, #148] ; 0x94 + 800416a: 463b mov r3, r7 + 800416c: 681b ldr r3, [r3, #0] + 800416e: 781b ldrb r3, [r3, #0] + 8004170: 011a lsls r2, r3, #4 + 8004172: f8d7 3094 ldr.w r3, [r7, #148] ; 0x94 + 8004176: 4413 add r3, r2 + 8004178: f203 430c addw r3, r3, #1036 ; 0x40c + 800417c: f8c7 3090 str.w r3, [r7, #144] ; 0x90 + 8004180: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004184: 2b00 cmp r3, #0 + 8004186: d116 bne.n 80041b6 + 8004188: f8d7 3090 ldr.w r3, [r7, #144] ; 0x90 + 800418c: 881b ldrh r3, [r3, #0] + 800418e: b29b uxth r3, r3 + 8004190: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8004194: b29a uxth r2, r3 + 8004196: f8d7 3090 ldr.w r3, [r7, #144] ; 0x90 + 800419a: 801a strh r2, [r3, #0] + 800419c: f8d7 3090 ldr.w r3, [r7, #144] ; 0x90 + 80041a0: 881b ldrh r3, [r3, #0] + 80041a2: b29b uxth r3, r3 + 80041a4: ea6f 4343 mvn.w r3, r3, lsl #17 + 80041a8: ea6f 4353 mvn.w r3, r3, lsr #17 + 80041ac: b29a uxth r2, r3 + 80041ae: f8d7 3090 ldr.w r3, [r7, #144] ; 0x90 + 80041b2: 801a strh r2, [r3, #0] + 80041b4: e32c b.n 8004810 + 80041b6: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80041ba: 2b3e cmp r3, #62 ; 0x3e + 80041bc: d818 bhi.n 80041f0 + 80041be: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80041c2: 085b lsrs r3, r3, #1 + 80041c4: f8c7 30ec str.w r3, [r7, #236] ; 0xec + 80041c8: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80041cc: f003 0301 and.w r3, r3, #1 + 80041d0: 2b00 cmp r3, #0 + 80041d2: d004 beq.n 80041de + 80041d4: f8d7 30ec ldr.w r3, [r7, #236] ; 0xec + 80041d8: 3301 adds r3, #1 + 80041da: f8c7 30ec str.w r3, [r7, #236] ; 0xec + 80041de: f8d7 30ec ldr.w r3, [r7, #236] ; 0xec + 80041e2: b29b uxth r3, r3 + 80041e4: 029b lsls r3, r3, #10 + 80041e6: b29a uxth r2, r3 + 80041e8: f8d7 3090 ldr.w r3, [r7, #144] ; 0x90 + 80041ec: 801a strh r2, [r3, #0] + 80041ee: e30f b.n 8004810 + 80041f0: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80041f4: 095b lsrs r3, r3, #5 + 80041f6: f8c7 30ec str.w r3, [r7, #236] ; 0xec + 80041fa: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80041fe: f003 031f and.w r3, r3, #31 + 8004202: 2b00 cmp r3, #0 + 8004204: d104 bne.n 8004210 + 8004206: f8d7 30ec ldr.w r3, [r7, #236] ; 0xec + 800420a: 3b01 subs r3, #1 + 800420c: f8c7 30ec str.w r3, [r7, #236] ; 0xec + 8004210: f8d7 30ec ldr.w r3, [r7, #236] ; 0xec + 8004214: b29b uxth r3, r3 + 8004216: 029b lsls r3, r3, #10 + 8004218: b29b uxth r3, r3 + 800421a: ea6f 4343 mvn.w r3, r3, lsl #17 + 800421e: ea6f 4353 mvn.w r3, r3, lsr #17 + 8004222: b29a uxth r2, r3 + 8004224: f8d7 3090 ldr.w r3, [r7, #144] ; 0x90 + 8004228: 801a strh r2, [r3, #0] + 800422a: e2f1 b.n 8004810 + } + else + { + /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */ + /* Set the Double buffer counter */ + if (ep->type == EP_TYPE_BULK) + 800422c: 463b mov r3, r7 + 800422e: 681b ldr r3, [r3, #0] + 8004230: 78db ldrb r3, [r3, #3] + 8004232: 2b02 cmp r3, #2 + 8004234: f040 818f bne.w 8004556 + { + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket); + 8004238: 463b mov r3, r7 + 800423a: 681b ldr r3, [r3, #0] + 800423c: 785b ldrb r3, [r3, #1] + 800423e: 2b00 cmp r3, #0 + 8004240: d175 bne.n 800432e + 8004242: 1d3b adds r3, r7, #4 + 8004244: 681b ldr r3, [r3, #0] + 8004246: f8c7 30b0 str.w r3, [r7, #176] ; 0xb0 + 800424a: 1d3b adds r3, r7, #4 + 800424c: 681b ldr r3, [r3, #0] + 800424e: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8004252: b29b uxth r3, r3 + 8004254: 461a mov r2, r3 + 8004256: f8d7 30b0 ldr.w r3, [r7, #176] ; 0xb0 + 800425a: 4413 add r3, r2 + 800425c: f8c7 30b0 str.w r3, [r7, #176] ; 0xb0 + 8004260: 463b mov r3, r7 + 8004262: 681b ldr r3, [r3, #0] + 8004264: 781b ldrb r3, [r3, #0] + 8004266: 011a lsls r2, r3, #4 + 8004268: f8d7 30b0 ldr.w r3, [r7, #176] ; 0xb0 + 800426c: 4413 add r3, r2 + 800426e: f203 4304 addw r3, r3, #1028 ; 0x404 + 8004272: f8c7 30ac str.w r3, [r7, #172] ; 0xac + 8004276: 463b mov r3, r7 + 8004278: 681b ldr r3, [r3, #0] + 800427a: 691b ldr r3, [r3, #16] + 800427c: 2b00 cmp r3, #0 + 800427e: d116 bne.n 80042ae + 8004280: f8d7 30ac ldr.w r3, [r7, #172] ; 0xac + 8004284: 881b ldrh r3, [r3, #0] + 8004286: b29b uxth r3, r3 + 8004288: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 800428c: b29a uxth r2, r3 + 800428e: f8d7 30ac ldr.w r3, [r7, #172] ; 0xac + 8004292: 801a strh r2, [r3, #0] + 8004294: f8d7 30ac ldr.w r3, [r7, #172] ; 0xac + 8004298: 881b ldrh r3, [r3, #0] + 800429a: b29b uxth r3, r3 + 800429c: ea6f 4343 mvn.w r3, r3, lsl #17 + 80042a0: ea6f 4353 mvn.w r3, r3, lsr #17 + 80042a4: b29a uxth r2, r3 + 80042a6: f8d7 30ac ldr.w r3, [r7, #172] ; 0xac + 80042aa: 801a strh r2, [r3, #0] + 80042ac: e065 b.n 800437a + 80042ae: 463b mov r3, r7 + 80042b0: 681b ldr r3, [r3, #0] + 80042b2: 691b ldr r3, [r3, #16] + 80042b4: 2b3e cmp r3, #62 ; 0x3e + 80042b6: d81a bhi.n 80042ee + 80042b8: 463b mov r3, r7 + 80042ba: 681b ldr r3, [r3, #0] + 80042bc: 691b ldr r3, [r3, #16] + 80042be: 085b lsrs r3, r3, #1 + 80042c0: f8c7 30e8 str.w r3, [r7, #232] ; 0xe8 + 80042c4: 463b mov r3, r7 + 80042c6: 681b ldr r3, [r3, #0] + 80042c8: 691b ldr r3, [r3, #16] + 80042ca: f003 0301 and.w r3, r3, #1 + 80042ce: 2b00 cmp r3, #0 + 80042d0: d004 beq.n 80042dc + 80042d2: f8d7 30e8 ldr.w r3, [r7, #232] ; 0xe8 + 80042d6: 3301 adds r3, #1 + 80042d8: f8c7 30e8 str.w r3, [r7, #232] ; 0xe8 + 80042dc: f8d7 30e8 ldr.w r3, [r7, #232] ; 0xe8 + 80042e0: b29b uxth r3, r3 + 80042e2: 029b lsls r3, r3, #10 + 80042e4: b29a uxth r2, r3 + 80042e6: f8d7 30ac ldr.w r3, [r7, #172] ; 0xac + 80042ea: 801a strh r2, [r3, #0] + 80042ec: e045 b.n 800437a + 80042ee: 463b mov r3, r7 + 80042f0: 681b ldr r3, [r3, #0] + 80042f2: 691b ldr r3, [r3, #16] + 80042f4: 095b lsrs r3, r3, #5 + 80042f6: f8c7 30e8 str.w r3, [r7, #232] ; 0xe8 + 80042fa: 463b mov r3, r7 + 80042fc: 681b ldr r3, [r3, #0] + 80042fe: 691b ldr r3, [r3, #16] + 8004300: f003 031f and.w r3, r3, #31 + 8004304: 2b00 cmp r3, #0 + 8004306: d104 bne.n 8004312 + 8004308: f8d7 30e8 ldr.w r3, [r7, #232] ; 0xe8 + 800430c: 3b01 subs r3, #1 + 800430e: f8c7 30e8 str.w r3, [r7, #232] ; 0xe8 + 8004312: f8d7 30e8 ldr.w r3, [r7, #232] ; 0xe8 + 8004316: b29b uxth r3, r3 + 8004318: 029b lsls r3, r3, #10 + 800431a: b29b uxth r3, r3 + 800431c: ea6f 4343 mvn.w r3, r3, lsl #17 + 8004320: ea6f 4353 mvn.w r3, r3, lsr #17 + 8004324: b29a uxth r2, r3 + 8004326: f8d7 30ac ldr.w r3, [r7, #172] ; 0xac + 800432a: 801a strh r2, [r3, #0] + 800432c: e025 b.n 800437a + 800432e: 463b mov r3, r7 + 8004330: 681b ldr r3, [r3, #0] + 8004332: 785b ldrb r3, [r3, #1] + 8004334: 2b01 cmp r3, #1 + 8004336: d120 bne.n 800437a + 8004338: 1d3b adds r3, r7, #4 + 800433a: 681b ldr r3, [r3, #0] + 800433c: f8c7 30b8 str.w r3, [r7, #184] ; 0xb8 + 8004340: 1d3b adds r3, r7, #4 + 8004342: 681b ldr r3, [r3, #0] + 8004344: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 8004348: b29b uxth r3, r3 + 800434a: 461a mov r2, r3 + 800434c: f8d7 30b8 ldr.w r3, [r7, #184] ; 0xb8 + 8004350: 4413 add r3, r2 + 8004352: f8c7 30b8 str.w r3, [r7, #184] ; 0xb8 + 8004356: 463b mov r3, r7 + 8004358: 681b ldr r3, [r3, #0] + 800435a: 781b ldrb r3, [r3, #0] + 800435c: 011a lsls r2, r3, #4 + 800435e: f8d7 30b8 ldr.w r3, [r7, #184] ; 0xb8 + 8004362: 4413 add r3, r2 + 8004364: f203 4304 addw r3, r3, #1028 ; 0x404 + 8004368: f8c7 30b4 str.w r3, [r7, #180] ; 0xb4 + 800436c: 463b mov r3, r7 + 800436e: 681b ldr r3, [r3, #0] + 8004370: 691b ldr r3, [r3, #16] + 8004372: b29a uxth r2, r3 + 8004374: f8d7 30b4 ldr.w r3, [r7, #180] ; 0xb4 + 8004378: 801a strh r2, [r3, #0] + 800437a: 1d3b adds r3, r7, #4 + 800437c: 681b ldr r3, [r3, #0] + 800437e: f8c7 30a8 str.w r3, [r7, #168] ; 0xa8 + 8004382: 463b mov r3, r7 + 8004384: 681b ldr r3, [r3, #0] + 8004386: 785b ldrb r3, [r3, #1] + 8004388: 2b00 cmp r3, #0 + 800438a: d175 bne.n 8004478 + 800438c: 1d3b adds r3, r7, #4 + 800438e: 681b ldr r3, [r3, #0] + 8004390: f8c7 30a0 str.w r3, [r7, #160] ; 0xa0 + 8004394: 1d3b adds r3, r7, #4 + 8004396: 681b ldr r3, [r3, #0] + 8004398: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 800439c: b29b uxth r3, r3 + 800439e: 461a mov r2, r3 + 80043a0: f8d7 30a0 ldr.w r3, [r7, #160] ; 0xa0 + 80043a4: 4413 add r3, r2 + 80043a6: f8c7 30a0 str.w r3, [r7, #160] ; 0xa0 + 80043aa: 463b mov r3, r7 + 80043ac: 681b ldr r3, [r3, #0] + 80043ae: 781b ldrb r3, [r3, #0] + 80043b0: 011a lsls r2, r3, #4 + 80043b2: f8d7 30a0 ldr.w r3, [r7, #160] ; 0xa0 + 80043b6: 4413 add r3, r2 + 80043b8: f203 430c addw r3, r3, #1036 ; 0x40c + 80043bc: f8c7 309c str.w r3, [r7, #156] ; 0x9c + 80043c0: 463b mov r3, r7 + 80043c2: 681b ldr r3, [r3, #0] + 80043c4: 691b ldr r3, [r3, #16] + 80043c6: 2b00 cmp r3, #0 + 80043c8: d116 bne.n 80043f8 + 80043ca: f8d7 309c ldr.w r3, [r7, #156] ; 0x9c + 80043ce: 881b ldrh r3, [r3, #0] + 80043d0: b29b uxth r3, r3 + 80043d2: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 80043d6: b29a uxth r2, r3 + 80043d8: f8d7 309c ldr.w r3, [r7, #156] ; 0x9c + 80043dc: 801a strh r2, [r3, #0] + 80043de: f8d7 309c ldr.w r3, [r7, #156] ; 0x9c + 80043e2: 881b ldrh r3, [r3, #0] + 80043e4: b29b uxth r3, r3 + 80043e6: ea6f 4343 mvn.w r3, r3, lsl #17 + 80043ea: ea6f 4353 mvn.w r3, r3, lsr #17 + 80043ee: b29a uxth r2, r3 + 80043f0: f8d7 309c ldr.w r3, [r7, #156] ; 0x9c + 80043f4: 801a strh r2, [r3, #0] + 80043f6: e061 b.n 80044bc + 80043f8: 463b mov r3, r7 + 80043fa: 681b ldr r3, [r3, #0] + 80043fc: 691b ldr r3, [r3, #16] + 80043fe: 2b3e cmp r3, #62 ; 0x3e + 8004400: d81a bhi.n 8004438 + 8004402: 463b mov r3, r7 + 8004404: 681b ldr r3, [r3, #0] + 8004406: 691b ldr r3, [r3, #16] + 8004408: 085b lsrs r3, r3, #1 + 800440a: f8c7 30e4 str.w r3, [r7, #228] ; 0xe4 + 800440e: 463b mov r3, r7 + 8004410: 681b ldr r3, [r3, #0] + 8004412: 691b ldr r3, [r3, #16] + 8004414: f003 0301 and.w r3, r3, #1 + 8004418: 2b00 cmp r3, #0 + 800441a: d004 beq.n 8004426 + 800441c: f8d7 30e4 ldr.w r3, [r7, #228] ; 0xe4 + 8004420: 3301 adds r3, #1 + 8004422: f8c7 30e4 str.w r3, [r7, #228] ; 0xe4 + 8004426: f8d7 30e4 ldr.w r3, [r7, #228] ; 0xe4 + 800442a: b29b uxth r3, r3 + 800442c: 029b lsls r3, r3, #10 + 800442e: b29a uxth r2, r3 + 8004430: f8d7 309c ldr.w r3, [r7, #156] ; 0x9c + 8004434: 801a strh r2, [r3, #0] + 8004436: e041 b.n 80044bc + 8004438: 463b mov r3, r7 + 800443a: 681b ldr r3, [r3, #0] + 800443c: 691b ldr r3, [r3, #16] + 800443e: 095b lsrs r3, r3, #5 + 8004440: f8c7 30e4 str.w r3, [r7, #228] ; 0xe4 + 8004444: 463b mov r3, r7 + 8004446: 681b ldr r3, [r3, #0] + 8004448: 691b ldr r3, [r3, #16] + 800444a: f003 031f and.w r3, r3, #31 + 800444e: 2b00 cmp r3, #0 + 8004450: d104 bne.n 800445c + 8004452: f8d7 30e4 ldr.w r3, [r7, #228] ; 0xe4 + 8004456: 3b01 subs r3, #1 + 8004458: f8c7 30e4 str.w r3, [r7, #228] ; 0xe4 + 800445c: f8d7 30e4 ldr.w r3, [r7, #228] ; 0xe4 + 8004460: b29b uxth r3, r3 + 8004462: 029b lsls r3, r3, #10 + 8004464: b29b uxth r3, r3 + 8004466: ea6f 4343 mvn.w r3, r3, lsl #17 + 800446a: ea6f 4353 mvn.w r3, r3, lsr #17 + 800446e: b29a uxth r2, r3 + 8004470: f8d7 309c ldr.w r3, [r7, #156] ; 0x9c + 8004474: 801a strh r2, [r3, #0] + 8004476: e021 b.n 80044bc + 8004478: 463b mov r3, r7 + 800447a: 681b ldr r3, [r3, #0] + 800447c: 785b ldrb r3, [r3, #1] + 800447e: 2b01 cmp r3, #1 + 8004480: d11c bne.n 80044bc + 8004482: 1d3b adds r3, r7, #4 + 8004484: 681b ldr r3, [r3, #0] + 8004486: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 800448a: b29b uxth r3, r3 + 800448c: 461a mov r2, r3 + 800448e: f8d7 30a8 ldr.w r3, [r7, #168] ; 0xa8 + 8004492: 4413 add r3, r2 + 8004494: f8c7 30a8 str.w r3, [r7, #168] ; 0xa8 + 8004498: 463b mov r3, r7 + 800449a: 681b ldr r3, [r3, #0] + 800449c: 781b ldrb r3, [r3, #0] + 800449e: 011a lsls r2, r3, #4 + 80044a0: f8d7 30a8 ldr.w r3, [r7, #168] ; 0xa8 + 80044a4: 4413 add r3, r2 + 80044a6: f203 430c addw r3, r3, #1036 ; 0x40c + 80044aa: f8c7 30a4 str.w r3, [r7, #164] ; 0xa4 + 80044ae: 463b mov r3, r7 + 80044b0: 681b ldr r3, [r3, #0] + 80044b2: 691b ldr r3, [r3, #16] + 80044b4: b29a uxth r2, r3 + 80044b6: f8d7 30a4 ldr.w r3, [r7, #164] ; 0xa4 + 80044ba: 801a strh r2, [r3, #0] + + /* Coming from ISR */ + if (ep->xfer_count != 0U) + 80044bc: 463b mov r3, r7 + 80044be: 681b ldr r3, [r3, #0] + 80044c0: 69db ldr r3, [r3, #28] + 80044c2: 2b00 cmp r3, #0 + 80044c4: f000 81a4 beq.w 8004810 + { + /* update last value to check if there is blocking state */ + wEPVal = PCD_GET_ENDPOINT(USBx, ep->num); + 80044c8: 1d3b adds r3, r7, #4 + 80044ca: 681a ldr r2, [r3, #0] + 80044cc: 463b mov r3, r7 + 80044ce: 681b ldr r3, [r3, #0] + 80044d0: 781b ldrb r3, [r3, #0] + 80044d2: 009b lsls r3, r3, #2 + 80044d4: 4413 add r3, r2 + 80044d6: 881b ldrh r3, [r3, #0] + 80044d8: f8a7 309a strh.w r3, [r7, #154] ; 0x9a + + /*Blocking State */ + if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || + 80044dc: f8b7 309a ldrh.w r3, [r7, #154] ; 0x9a + 80044e0: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 80044e4: 2b00 cmp r3, #0 + 80044e6: d005 beq.n 80044f4 + 80044e8: f8b7 309a ldrh.w r3, [r7, #154] ; 0x9a + 80044ec: f003 0340 and.w r3, r3, #64 ; 0x40 + 80044f0: 2b00 cmp r3, #0 + 80044f2: d10d bne.n 8004510 + (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) + 80044f4: f8b7 309a ldrh.w r3, [r7, #154] ; 0x9a + 80044f8: f403 4380 and.w r3, r3, #16384 ; 0x4000 + if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || + 80044fc: 2b00 cmp r3, #0 + 80044fe: f040 8187 bne.w 8004810 + (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) + 8004502: f8b7 309a ldrh.w r3, [r7, #154] ; 0x9a + 8004506: f003 0340 and.w r3, r3, #64 ; 0x40 + 800450a: 2b00 cmp r3, #0 + 800450c: f040 8180 bne.w 8004810 + { + PCD_FreeUserBuffer(USBx, ep->num, 0U); + 8004510: 1d3b adds r3, r7, #4 + 8004512: 681a ldr r2, [r3, #0] + 8004514: 463b mov r3, r7 + 8004516: 681b ldr r3, [r3, #0] + 8004518: 781b ldrb r3, [r3, #0] + 800451a: 009b lsls r3, r3, #2 + 800451c: 4413 add r3, r2 + 800451e: 881b ldrh r3, [r3, #0] + 8004520: b29b uxth r3, r3 + 8004522: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 8004526: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800452a: f8a7 3098 strh.w r3, [r7, #152] ; 0x98 + 800452e: 1d3b adds r3, r7, #4 + 8004530: 681a ldr r2, [r3, #0] + 8004532: 463b mov r3, r7 + 8004534: 681b ldr r3, [r3, #0] + 8004536: 781b ldrb r3, [r3, #0] + 8004538: 009b lsls r3, r3, #2 + 800453a: 441a add r2, r3 + 800453c: f8b7 3098 ldrh.w r3, [r7, #152] ; 0x98 + 8004540: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8004544: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8004548: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 800454c: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8004550: b29b uxth r3, r3 + 8004552: 8013 strh r3, [r2, #0] + 8004554: e15c b.n 8004810 + } + } + } + /* iso out double */ + else if (ep->type == EP_TYPE_ISOC) + 8004556: 463b mov r3, r7 + 8004558: 681b ldr r3, [r3, #0] + 800455a: 78db ldrb r3, [r3, #3] + 800455c: 2b01 cmp r3, #1 + 800455e: f040 8155 bne.w 800480c + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + 8004562: 463b mov r3, r7 + 8004564: 681b ldr r3, [r3, #0] + 8004566: 699a ldr r2, [r3, #24] + 8004568: 463b mov r3, r7 + 800456a: 681b ldr r3, [r3, #0] + 800456c: 691b ldr r3, [r3, #16] + 800456e: 429a cmp r2, r3 + 8004570: d90e bls.n 8004590 + { + len = ep->maxpacket; + 8004572: 463b mov r3, r7 + 8004574: 681b ldr r3, [r3, #0] + 8004576: 691b ldr r3, [r3, #16] + 8004578: f8c7 310c str.w r3, [r7, #268] ; 0x10c + ep->xfer_len -= len; + 800457c: 463b mov r3, r7 + 800457e: 681b ldr r3, [r3, #0] + 8004580: 699a ldr r2, [r3, #24] + 8004582: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004586: 1ad2 subs r2, r2, r3 + 8004588: 463b mov r3, r7 + 800458a: 681b ldr r3, [r3, #0] + 800458c: 619a str r2, [r3, #24] + 800458e: e008 b.n 80045a2 + } + else + { + len = ep->xfer_len; + 8004590: 463b mov r3, r7 + 8004592: 681b ldr r3, [r3, #0] + 8004594: 699b ldr r3, [r3, #24] + 8004596: f8c7 310c str.w r3, [r7, #268] ; 0x10c + ep->xfer_len = 0U; + 800459a: 463b mov r3, r7 + 800459c: 681b ldr r3, [r3, #0] + 800459e: 2200 movs r2, #0 + 80045a0: 619a str r2, [r3, #24] + } + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + 80045a2: 463b mov r3, r7 + 80045a4: 681b ldr r3, [r3, #0] + 80045a6: 785b ldrb r3, [r3, #1] + 80045a8: 2b00 cmp r3, #0 + 80045aa: d16f bne.n 800468c + 80045ac: 1d3b adds r3, r7, #4 + 80045ae: 681b ldr r3, [r3, #0] + 80045b0: f8c7 30d0 str.w r3, [r7, #208] ; 0xd0 + 80045b4: 1d3b adds r3, r7, #4 + 80045b6: 681b ldr r3, [r3, #0] + 80045b8: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80045bc: b29b uxth r3, r3 + 80045be: 461a mov r2, r3 + 80045c0: f8d7 30d0 ldr.w r3, [r7, #208] ; 0xd0 + 80045c4: 4413 add r3, r2 + 80045c6: f8c7 30d0 str.w r3, [r7, #208] ; 0xd0 + 80045ca: 463b mov r3, r7 + 80045cc: 681b ldr r3, [r3, #0] + 80045ce: 781b ldrb r3, [r3, #0] + 80045d0: 011a lsls r2, r3, #4 + 80045d2: f8d7 30d0 ldr.w r3, [r7, #208] ; 0xd0 + 80045d6: 4413 add r3, r2 + 80045d8: f203 4304 addw r3, r3, #1028 ; 0x404 + 80045dc: f8c7 30cc str.w r3, [r7, #204] ; 0xcc + 80045e0: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80045e4: 2b00 cmp r3, #0 + 80045e6: d116 bne.n 8004616 + 80045e8: f8d7 30cc ldr.w r3, [r7, #204] ; 0xcc + 80045ec: 881b ldrh r3, [r3, #0] + 80045ee: b29b uxth r3, r3 + 80045f0: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 80045f4: b29a uxth r2, r3 + 80045f6: f8d7 30cc ldr.w r3, [r7, #204] ; 0xcc + 80045fa: 801a strh r2, [r3, #0] + 80045fc: f8d7 30cc ldr.w r3, [r7, #204] ; 0xcc + 8004600: 881b ldrh r3, [r3, #0] + 8004602: b29b uxth r3, r3 + 8004604: ea6f 4343 mvn.w r3, r3, lsl #17 + 8004608: ea6f 4353 mvn.w r3, r3, lsr #17 + 800460c: b29a uxth r2, r3 + 800460e: f8d7 30cc ldr.w r3, [r7, #204] ; 0xcc + 8004612: 801a strh r2, [r3, #0] + 8004614: e05f b.n 80046d6 + 8004616: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 800461a: 2b3e cmp r3, #62 ; 0x3e + 800461c: d818 bhi.n 8004650 + 800461e: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004622: 085b lsrs r3, r3, #1 + 8004624: f8c7 30e0 str.w r3, [r7, #224] ; 0xe0 + 8004628: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 800462c: f003 0301 and.w r3, r3, #1 + 8004630: 2b00 cmp r3, #0 + 8004632: d004 beq.n 800463e + 8004634: f8d7 30e0 ldr.w r3, [r7, #224] ; 0xe0 + 8004638: 3301 adds r3, #1 + 800463a: f8c7 30e0 str.w r3, [r7, #224] ; 0xe0 + 800463e: f8d7 30e0 ldr.w r3, [r7, #224] ; 0xe0 + 8004642: b29b uxth r3, r3 + 8004644: 029b lsls r3, r3, #10 + 8004646: b29a uxth r2, r3 + 8004648: f8d7 30cc ldr.w r3, [r7, #204] ; 0xcc + 800464c: 801a strh r2, [r3, #0] + 800464e: e042 b.n 80046d6 + 8004650: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004654: 095b lsrs r3, r3, #5 + 8004656: f8c7 30e0 str.w r3, [r7, #224] ; 0xe0 + 800465a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 800465e: f003 031f and.w r3, r3, #31 + 8004662: 2b00 cmp r3, #0 + 8004664: d104 bne.n 8004670 + 8004666: f8d7 30e0 ldr.w r3, [r7, #224] ; 0xe0 + 800466a: 3b01 subs r3, #1 + 800466c: f8c7 30e0 str.w r3, [r7, #224] ; 0xe0 + 8004670: f8d7 30e0 ldr.w r3, [r7, #224] ; 0xe0 + 8004674: b29b uxth r3, r3 + 8004676: 029b lsls r3, r3, #10 + 8004678: b29b uxth r3, r3 + 800467a: ea6f 4343 mvn.w r3, r3, lsl #17 + 800467e: ea6f 4353 mvn.w r3, r3, lsr #17 + 8004682: b29a uxth r2, r3 + 8004684: f8d7 30cc ldr.w r3, [r7, #204] ; 0xcc + 8004688: 801a strh r2, [r3, #0] + 800468a: e024 b.n 80046d6 + 800468c: 463b mov r3, r7 + 800468e: 681b ldr r3, [r3, #0] + 8004690: 785b ldrb r3, [r3, #1] + 8004692: 2b01 cmp r3, #1 + 8004694: d11f bne.n 80046d6 + 8004696: 1d3b adds r3, r7, #4 + 8004698: 681b ldr r3, [r3, #0] + 800469a: f8c7 30d8 str.w r3, [r7, #216] ; 0xd8 + 800469e: 1d3b adds r3, r7, #4 + 80046a0: 681b ldr r3, [r3, #0] + 80046a2: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80046a6: b29b uxth r3, r3 + 80046a8: 461a mov r2, r3 + 80046aa: f8d7 30d8 ldr.w r3, [r7, #216] ; 0xd8 + 80046ae: 4413 add r3, r2 + 80046b0: f8c7 30d8 str.w r3, [r7, #216] ; 0xd8 + 80046b4: 463b mov r3, r7 + 80046b6: 681b ldr r3, [r3, #0] + 80046b8: 781b ldrb r3, [r3, #0] + 80046ba: 011a lsls r2, r3, #4 + 80046bc: f8d7 30d8 ldr.w r3, [r7, #216] ; 0xd8 + 80046c0: 4413 add r3, r2 + 80046c2: f203 4304 addw r3, r3, #1028 ; 0x404 + 80046c6: f8c7 30d4 str.w r3, [r7, #212] ; 0xd4 + 80046ca: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 80046ce: b29a uxth r2, r3 + 80046d0: f8d7 30d4 ldr.w r3, [r7, #212] ; 0xd4 + 80046d4: 801a strh r2, [r3, #0] + 80046d6: 1d3b adds r3, r7, #4 + 80046d8: 681b ldr r3, [r3, #0] + 80046da: f8c7 30c8 str.w r3, [r7, #200] ; 0xc8 + 80046de: 463b mov r3, r7 + 80046e0: 681b ldr r3, [r3, #0] + 80046e2: 785b ldrb r3, [r3, #1] + 80046e4: 2b00 cmp r3, #0 + 80046e6: d16f bne.n 80047c8 + 80046e8: 1d3b adds r3, r7, #4 + 80046ea: 681b ldr r3, [r3, #0] + 80046ec: f8c7 30c0 str.w r3, [r7, #192] ; 0xc0 + 80046f0: 1d3b adds r3, r7, #4 + 80046f2: 681b ldr r3, [r3, #0] + 80046f4: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80046f8: b29b uxth r3, r3 + 80046fa: 461a mov r2, r3 + 80046fc: f8d7 30c0 ldr.w r3, [r7, #192] ; 0xc0 + 8004700: 4413 add r3, r2 + 8004702: f8c7 30c0 str.w r3, [r7, #192] ; 0xc0 + 8004706: 463b mov r3, r7 + 8004708: 681b ldr r3, [r3, #0] + 800470a: 781b ldrb r3, [r3, #0] + 800470c: 011a lsls r2, r3, #4 + 800470e: f8d7 30c0 ldr.w r3, [r7, #192] ; 0xc0 + 8004712: 4413 add r3, r2 + 8004714: f203 430c addw r3, r3, #1036 ; 0x40c + 8004718: f8c7 30bc str.w r3, [r7, #188] ; 0xbc + 800471c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004720: 2b00 cmp r3, #0 + 8004722: d116 bne.n 8004752 + 8004724: f8d7 30bc ldr.w r3, [r7, #188] ; 0xbc + 8004728: 881b ldrh r3, [r3, #0] + 800472a: b29b uxth r3, r3 + 800472c: f423 43f8 bic.w r3, r3, #31744 ; 0x7c00 + 8004730: b29a uxth r2, r3 + 8004732: f8d7 30bc ldr.w r3, [r7, #188] ; 0xbc + 8004736: 801a strh r2, [r3, #0] + 8004738: f8d7 30bc ldr.w r3, [r7, #188] ; 0xbc + 800473c: 881b ldrh r3, [r3, #0] + 800473e: b29b uxth r3, r3 + 8004740: ea6f 4343 mvn.w r3, r3, lsl #17 + 8004744: ea6f 4353 mvn.w r3, r3, lsr #17 + 8004748: b29a uxth r2, r3 + 800474a: f8d7 30bc ldr.w r3, [r7, #188] ; 0xbc + 800474e: 801a strh r2, [r3, #0] + 8004750: e05e b.n 8004810 + 8004752: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004756: 2b3e cmp r3, #62 ; 0x3e + 8004758: d818 bhi.n 800478c + 800475a: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 800475e: 085b lsrs r3, r3, #1 + 8004760: f8c7 30dc str.w r3, [r7, #220] ; 0xdc + 8004764: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004768: f003 0301 and.w r3, r3, #1 + 800476c: 2b00 cmp r3, #0 + 800476e: d004 beq.n 800477a + 8004770: f8d7 30dc ldr.w r3, [r7, #220] ; 0xdc + 8004774: 3301 adds r3, #1 + 8004776: f8c7 30dc str.w r3, [r7, #220] ; 0xdc + 800477a: f8d7 30dc ldr.w r3, [r7, #220] ; 0xdc + 800477e: b29b uxth r3, r3 + 8004780: 029b lsls r3, r3, #10 + 8004782: b29a uxth r2, r3 + 8004784: f8d7 30bc ldr.w r3, [r7, #188] ; 0xbc + 8004788: 801a strh r2, [r3, #0] + 800478a: e041 b.n 8004810 + 800478c: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004790: 095b lsrs r3, r3, #5 + 8004792: f8c7 30dc str.w r3, [r7, #220] ; 0xdc + 8004796: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 800479a: f003 031f and.w r3, r3, #31 + 800479e: 2b00 cmp r3, #0 + 80047a0: d104 bne.n 80047ac + 80047a2: f8d7 30dc ldr.w r3, [r7, #220] ; 0xdc + 80047a6: 3b01 subs r3, #1 + 80047a8: f8c7 30dc str.w r3, [r7, #220] ; 0xdc + 80047ac: f8d7 30dc ldr.w r3, [r7, #220] ; 0xdc + 80047b0: b29b uxth r3, r3 + 80047b2: 029b lsls r3, r3, #10 + 80047b4: b29b uxth r3, r3 + 80047b6: ea6f 4343 mvn.w r3, r3, lsl #17 + 80047ba: ea6f 4353 mvn.w r3, r3, lsr #17 + 80047be: b29a uxth r2, r3 + 80047c0: f8d7 30bc ldr.w r3, [r7, #188] ; 0xbc + 80047c4: 801a strh r2, [r3, #0] + 80047c6: e023 b.n 8004810 + 80047c8: 463b mov r3, r7 + 80047ca: 681b ldr r3, [r3, #0] + 80047cc: 785b ldrb r3, [r3, #1] + 80047ce: 2b01 cmp r3, #1 + 80047d0: d11e bne.n 8004810 + 80047d2: 1d3b adds r3, r7, #4 + 80047d4: 681b ldr r3, [r3, #0] + 80047d6: f8b3 3050 ldrh.w r3, [r3, #80] ; 0x50 + 80047da: b29b uxth r3, r3 + 80047dc: 461a mov r2, r3 + 80047de: f8d7 30c8 ldr.w r3, [r7, #200] ; 0xc8 + 80047e2: 4413 add r3, r2 + 80047e4: f8c7 30c8 str.w r3, [r7, #200] ; 0xc8 + 80047e8: 463b mov r3, r7 + 80047ea: 681b ldr r3, [r3, #0] + 80047ec: 781b ldrb r3, [r3, #0] + 80047ee: 011a lsls r2, r3, #4 + 80047f0: f8d7 30c8 ldr.w r3, [r7, #200] ; 0xc8 + 80047f4: 4413 add r3, r2 + 80047f6: f203 430c addw r3, r3, #1036 ; 0x40c + 80047fa: f8c7 30c4 str.w r3, [r7, #196] ; 0xc4 + 80047fe: f8d7 310c ldr.w r3, [r7, #268] ; 0x10c + 8004802: b29a uxth r2, r3 + 8004804: f8d7 30c4 ldr.w r3, [r7, #196] ; 0xc4 + 8004808: 801a strh r2, [r3, #0] + 800480a: e001 b.n 8004810 + } + else + { + return HAL_ERROR; + 800480c: 2301 movs r3, #1 + 800480e: e02e b.n 800486e + } + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + 8004810: 1d3b adds r3, r7, #4 + 8004812: 681a ldr r2, [r3, #0] + 8004814: 463b mov r3, r7 + 8004816: 681b ldr r3, [r3, #0] + 8004818: 781b ldrb r3, [r3, #0] + 800481a: 009b lsls r3, r3, #2 + 800481c: 4413 add r3, r2 + 800481e: 881b ldrh r3, [r3, #0] + 8004820: b29b uxth r3, r3 + 8004822: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8004826: f023 0370 bic.w r3, r3, #112 ; 0x70 + 800482a: f8a7 308e strh.w r3, [r7, #142] ; 0x8e + 800482e: f8b7 308e ldrh.w r3, [r7, #142] ; 0x8e + 8004832: f483 5380 eor.w r3, r3, #4096 ; 0x1000 + 8004836: f8a7 308e strh.w r3, [r7, #142] ; 0x8e + 800483a: f8b7 308e ldrh.w r3, [r7, #142] ; 0x8e + 800483e: f483 5300 eor.w r3, r3, #8192 ; 0x2000 + 8004842: f8a7 308e strh.w r3, [r7, #142] ; 0x8e + 8004846: 1d3b adds r3, r7, #4 + 8004848: 681a ldr r2, [r3, #0] + 800484a: 463b mov r3, r7 + 800484c: 681b ldr r3, [r3, #0] + 800484e: 781b ldrb r3, [r3, #0] + 8004850: 009b lsls r3, r3, #2 + 8004852: 441a add r2, r3 + 8004854: f8b7 308e ldrh.w r3, [r7, #142] ; 0x8e + 8004858: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 800485c: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8004860: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8004864: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8004868: b29b uxth r3, r3 + 800486a: 8013 strh r3, [r2, #0] + } + + return HAL_OK; + 800486c: 2300 movs r3, #0 +} + 800486e: 4618 mov r0, r3 + 8004870: f507 7788 add.w r7, r7, #272 ; 0x110 + 8004874: 46bd mov sp, r7 + 8004876: bd80 pop {r7, pc} + +08004878 : + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + 8004878: b480 push {r7} + 800487a: b085 sub sp, #20 + 800487c: af00 add r7, sp, #0 + 800487e: 6078 str r0, [r7, #4] + 8004880: 6039 str r1, [r7, #0] + if (ep->is_in != 0U) + 8004882: 683b ldr r3, [r7, #0] + 8004884: 785b ldrb r3, [r3, #1] + 8004886: 2b00 cmp r3, #0 + 8004888: d020 beq.n 80048cc + { + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL); + 800488a: 687a ldr r2, [r7, #4] + 800488c: 683b ldr r3, [r7, #0] + 800488e: 781b ldrb r3, [r3, #0] + 8004890: 009b lsls r3, r3, #2 + 8004892: 4413 add r3, r2 + 8004894: 881b ldrh r3, [r3, #0] + 8004896: b29b uxth r3, r3 + 8004898: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 800489c: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80048a0: 81bb strh r3, [r7, #12] + 80048a2: 89bb ldrh r3, [r7, #12] + 80048a4: f083 0310 eor.w r3, r3, #16 + 80048a8: 81bb strh r3, [r7, #12] + 80048aa: 687a ldr r2, [r7, #4] + 80048ac: 683b ldr r3, [r7, #0] + 80048ae: 781b ldrb r3, [r3, #0] + 80048b0: 009b lsls r3, r3, #2 + 80048b2: 441a add r2, r3 + 80048b4: 89bb ldrh r3, [r7, #12] + 80048b6: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80048ba: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80048be: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80048c2: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80048c6: b29b uxth r3, r3 + 80048c8: 8013 strh r3, [r2, #0] + 80048ca: e01f b.n 800490c + } + else + { + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL); + 80048cc: 687a ldr r2, [r7, #4] + 80048ce: 683b ldr r3, [r7, #0] + 80048d0: 781b ldrb r3, [r3, #0] + 80048d2: 009b lsls r3, r3, #2 + 80048d4: 4413 add r3, r2 + 80048d6: 881b ldrh r3, [r3, #0] + 80048d8: b29b uxth r3, r3 + 80048da: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 80048de: f023 0370 bic.w r3, r3, #112 ; 0x70 + 80048e2: 81fb strh r3, [r7, #14] + 80048e4: 89fb ldrh r3, [r7, #14] + 80048e6: f483 5380 eor.w r3, r3, #4096 ; 0x1000 + 80048ea: 81fb strh r3, [r7, #14] + 80048ec: 687a ldr r2, [r7, #4] + 80048ee: 683b ldr r3, [r7, #0] + 80048f0: 781b ldrb r3, [r3, #0] + 80048f2: 009b lsls r3, r3, #2 + 80048f4: 441a add r2, r3 + 80048f6: 89fb ldrh r3, [r7, #14] + 80048f8: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80048fc: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8004900: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8004904: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8004908: b29b uxth r3, r3 + 800490a: 8013 strh r3, [r2, #0] + } + + return HAL_OK; + 800490c: 2300 movs r3, #0 +} + 800490e: 4618 mov r0, r3 + 8004910: 3714 adds r7, #20 + 8004912: 46bd mov sp, r7 + 8004914: bc80 pop {r7} + 8004916: 4770 bx lr + +08004918 : + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + 8004918: b480 push {r7} + 800491a: b087 sub sp, #28 + 800491c: af00 add r7, sp, #0 + 800491e: 6078 str r0, [r7, #4] + 8004920: 6039 str r1, [r7, #0] + if (ep->doublebuffer == 0U) + 8004922: 683b ldr r3, [r7, #0] + 8004924: 7b1b ldrb r3, [r3, #12] + 8004926: 2b00 cmp r3, #0 + 8004928: f040 809d bne.w 8004a66 + { + if (ep->is_in != 0U) + 800492c: 683b ldr r3, [r7, #0] + 800492e: 785b ldrb r3, [r3, #1] + 8004930: 2b00 cmp r3, #0 + 8004932: d04c beq.n 80049ce + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + 8004934: 687a ldr r2, [r7, #4] + 8004936: 683b ldr r3, [r7, #0] + 8004938: 781b ldrb r3, [r3, #0] + 800493a: 009b lsls r3, r3, #2 + 800493c: 4413 add r3, r2 + 800493e: 881b ldrh r3, [r3, #0] + 8004940: 823b strh r3, [r7, #16] + 8004942: 8a3b ldrh r3, [r7, #16] + 8004944: f003 0340 and.w r3, r3, #64 ; 0x40 + 8004948: 2b00 cmp r3, #0 + 800494a: d01b beq.n 8004984 + 800494c: 687a ldr r2, [r7, #4] + 800494e: 683b ldr r3, [r7, #0] + 8004950: 781b ldrb r3, [r3, #0] + 8004952: 009b lsls r3, r3, #2 + 8004954: 4413 add r3, r2 + 8004956: 881b ldrh r3, [r3, #0] + 8004958: b29b uxth r3, r3 + 800495a: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 800495e: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8004962: 81fb strh r3, [r7, #14] + 8004964: 687a ldr r2, [r7, #4] + 8004966: 683b ldr r3, [r7, #0] + 8004968: 781b ldrb r3, [r3, #0] + 800496a: 009b lsls r3, r3, #2 + 800496c: 441a add r2, r3 + 800496e: 89fb ldrh r3, [r7, #14] + 8004970: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8004974: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8004978: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 800497c: f043 03c0 orr.w r3, r3, #192 ; 0xc0 + 8004980: b29b uxth r3, r3 + 8004982: 8013 strh r3, [r2, #0] + + if (ep->type != EP_TYPE_ISOC) + 8004984: 683b ldr r3, [r7, #0] + 8004986: 78db ldrb r3, [r3, #3] + 8004988: 2b01 cmp r3, #1 + 800498a: d06c beq.n 8004a66 + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + 800498c: 687a ldr r2, [r7, #4] + 800498e: 683b ldr r3, [r7, #0] + 8004990: 781b ldrb r3, [r3, #0] + 8004992: 009b lsls r3, r3, #2 + 8004994: 4413 add r3, r2 + 8004996: 881b ldrh r3, [r3, #0] + 8004998: b29b uxth r3, r3 + 800499a: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 800499e: f023 0340 bic.w r3, r3, #64 ; 0x40 + 80049a2: 81bb strh r3, [r7, #12] + 80049a4: 89bb ldrh r3, [r7, #12] + 80049a6: f083 0320 eor.w r3, r3, #32 + 80049aa: 81bb strh r3, [r7, #12] + 80049ac: 687a ldr r2, [r7, #4] + 80049ae: 683b ldr r3, [r7, #0] + 80049b0: 781b ldrb r3, [r3, #0] + 80049b2: 009b lsls r3, r3, #2 + 80049b4: 441a add r2, r3 + 80049b6: 89bb ldrh r3, [r7, #12] + 80049b8: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 80049bc: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 80049c0: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 80049c4: f043 0380 orr.w r3, r3, #128 ; 0x80 + 80049c8: b29b uxth r3, r3 + 80049ca: 8013 strh r3, [r2, #0] + 80049cc: e04b b.n 8004a66 + } + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + 80049ce: 687a ldr r2, [r7, #4] + 80049d0: 683b ldr r3, [r7, #0] + 80049d2: 781b ldrb r3, [r3, #0] + 80049d4: 009b lsls r3, r3, #2 + 80049d6: 4413 add r3, r2 + 80049d8: 881b ldrh r3, [r3, #0] + 80049da: 82fb strh r3, [r7, #22] + 80049dc: 8afb ldrh r3, [r7, #22] + 80049de: f403 4380 and.w r3, r3, #16384 ; 0x4000 + 80049e2: 2b00 cmp r3, #0 + 80049e4: d01b beq.n 8004a1e + 80049e6: 687a ldr r2, [r7, #4] + 80049e8: 683b ldr r3, [r7, #0] + 80049ea: 781b ldrb r3, [r3, #0] + 80049ec: 009b lsls r3, r3, #2 + 80049ee: 4413 add r3, r2 + 80049f0: 881b ldrh r3, [r3, #0] + 80049f2: b29b uxth r3, r3 + 80049f4: f423 43e0 bic.w r3, r3, #28672 ; 0x7000 + 80049f8: f023 0370 bic.w r3, r3, #112 ; 0x70 + 80049fc: 82bb strh r3, [r7, #20] + 80049fe: 687a ldr r2, [r7, #4] + 8004a00: 683b ldr r3, [r7, #0] + 8004a02: 781b ldrb r3, [r3, #0] + 8004a04: 009b lsls r3, r3, #2 + 8004a06: 441a add r2, r3 + 8004a08: 8abb ldrh r3, [r7, #20] + 8004a0a: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8004a0e: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8004a12: f443 4340 orr.w r3, r3, #49152 ; 0xc000 + 8004a16: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8004a1a: b29b uxth r3, r3 + 8004a1c: 8013 strh r3, [r2, #0] + + /* Configure VALID status for the Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + 8004a1e: 687a ldr r2, [r7, #4] + 8004a20: 683b ldr r3, [r7, #0] + 8004a22: 781b ldrb r3, [r3, #0] + 8004a24: 009b lsls r3, r3, #2 + 8004a26: 4413 add r3, r2 + 8004a28: 881b ldrh r3, [r3, #0] + 8004a2a: b29b uxth r3, r3 + 8004a2c: f423 4380 bic.w r3, r3, #16384 ; 0x4000 + 8004a30: f023 0370 bic.w r3, r3, #112 ; 0x70 + 8004a34: 827b strh r3, [r7, #18] + 8004a36: 8a7b ldrh r3, [r7, #18] + 8004a38: f483 5380 eor.w r3, r3, #4096 ; 0x1000 + 8004a3c: 827b strh r3, [r7, #18] + 8004a3e: 8a7b ldrh r3, [r7, #18] + 8004a40: f483 5300 eor.w r3, r3, #8192 ; 0x2000 + 8004a44: 827b strh r3, [r7, #18] + 8004a46: 687a ldr r2, [r7, #4] + 8004a48: 683b ldr r3, [r7, #0] + 8004a4a: 781b ldrb r3, [r3, #0] + 8004a4c: 009b lsls r3, r3, #2 + 8004a4e: 441a add r2, r3 + 8004a50: 8a7b ldrh r3, [r7, #18] + 8004a52: f043 437f orr.w r3, r3, #4278190080 ; 0xff000000 + 8004a56: f443 037f orr.w r3, r3, #16711680 ; 0xff0000 + 8004a5a: f443 4300 orr.w r3, r3, #32768 ; 0x8000 + 8004a5e: f043 0380 orr.w r3, r3, #128 ; 0x80 + 8004a62: b29b uxth r3, r3 + 8004a64: 8013 strh r3, [r2, #0] + } + } + + return HAL_OK; + 8004a66: 2300 movs r3, #0 +} + 8004a68: 4618 mov r0, r3 + 8004a6a: 371c adds r7, #28 + 8004a6c: 46bd mov sp, r7 + 8004a6e: bc80 pop {r7} + 8004a70: 4770 bx lr + +08004a72 : + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address) +{ + 8004a72: b480 push {r7} + 8004a74: b083 sub sp, #12 + 8004a76: af00 add r7, sp, #0 + 8004a78: 6078 str r0, [r7, #4] + 8004a7a: 460b mov r3, r1 + 8004a7c: 70fb strb r3, [r7, #3] + if (address == 0U) + 8004a7e: 78fb ldrb r3, [r7, #3] + 8004a80: 2b00 cmp r3, #0 + 8004a82: d103 bne.n 8004a8c + { + /* set device address and enable function */ + USBx->DADDR = (uint16_t)USB_DADDR_EF; + 8004a84: 687b ldr r3, [r7, #4] + 8004a86: 2280 movs r2, #128 ; 0x80 + 8004a88: f8a3 204c strh.w r2, [r3, #76] ; 0x4c + } + + return HAL_OK; + 8004a8c: 2300 movs r3, #0 +} + 8004a8e: 4618 mov r0, r3 + 8004a90: 370c adds r7, #12 + 8004a92: 46bd mov sp, r7 + 8004a94: bc80 pop {r7} + 8004a96: 4770 bx lr + +08004a98 : + * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx) +{ + 8004a98: b480 push {r7} + 8004a9a: b083 sub sp, #12 + 8004a9c: af00 add r7, sp, #0 + 8004a9e: 6078 str r0, [r7, #4] + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; + 8004aa0: 2300 movs r3, #0 +} + 8004aa2: 4618 mov r0, r3 + 8004aa4: 370c adds r7, #12 + 8004aa6: 46bd mov sp, r7 + 8004aa8: bc80 pop {r7} + 8004aaa: 4770 bx lr + +08004aac : + * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx) +{ + 8004aac: b480 push {r7} + 8004aae: b083 sub sp, #12 + 8004ab0: af00 add r7, sp, #0 + 8004ab2: 6078 str r0, [r7, #4] + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; + 8004ab4: 2300 movs r3, #0 +} + 8004ab6: 4618 mov r0, r3 + 8004ab8: 370c adds r7, #12 + 8004aba: 46bd mov sp, r7 + 8004abc: bc80 pop {r7} + 8004abe: 4770 bx lr + +08004ac0 : + * @brief USB_ReadInterrupts return the global USB interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts(USB_TypeDef *USBx) +{ + 8004ac0: b480 push {r7} + 8004ac2: b085 sub sp, #20 + 8004ac4: af00 add r7, sp, #0 + 8004ac6: 6078 str r0, [r7, #4] + uint32_t tmpreg; + + tmpreg = USBx->ISTR; + 8004ac8: 687b ldr r3, [r7, #4] + 8004aca: f8b3 3044 ldrh.w r3, [r3, #68] ; 0x44 + 8004ace: b29b uxth r3, r3 + 8004ad0: 60fb str r3, [r7, #12] + return tmpreg; + 8004ad2: 68fb ldr r3, [r7, #12] +} + 8004ad4: 4618 mov r0, r3 + 8004ad6: 3714 adds r7, #20 + 8004ad8: 46bd mov sp, r7 + 8004ada: bc80 pop {r7} + 8004adc: 4770 bx lr + +08004ade : + * @param USBx Selected device + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup) +{ + 8004ade: b480 push {r7} + 8004ae0: b083 sub sp, #12 + 8004ae2: af00 add r7, sp, #0 + 8004ae4: 6078 str r0, [r7, #4] + 8004ae6: 6039 str r1, [r7, #0] + UNUSED(psetup); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; + 8004ae8: 2300 movs r3, #0 +} + 8004aea: 4618 mov r0, r3 + 8004aec: 370c adds r7, #12 + 8004aee: 46bd mov sp, r7 + 8004af0: bc80 pop {r7} + 8004af2: 4770 bx lr + +08004af4 : + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + 8004af4: b480 push {r7} + 8004af6: b08d sub sp, #52 ; 0x34 + 8004af8: af00 add r7, sp, #0 + 8004afa: 60f8 str r0, [r7, #12] + 8004afc: 60b9 str r1, [r7, #8] + 8004afe: 4611 mov r1, r2 + 8004b00: 461a mov r2, r3 + 8004b02: 460b mov r3, r1 + 8004b04: 80fb strh r3, [r7, #6] + 8004b06: 4613 mov r3, r2 + 8004b08: 80bb strh r3, [r7, #4] + uint32_t n = ((uint32_t)wNBytes + 1U) >> 1; + 8004b0a: 88bb ldrh r3, [r7, #4] + 8004b0c: 3301 adds r3, #1 + 8004b0e: 085b lsrs r3, r3, #1 + 8004b10: 623b str r3, [r7, #32] + uint32_t BaseAddr = (uint32_t)USBx; + 8004b12: 68fb ldr r3, [r7, #12] + 8004b14: 61fb str r3, [r7, #28] + uint32_t i, temp1, temp2; + __IO uint16_t *pdwVal; + uint8_t *pBuf = pbUsrBuf; + 8004b16: 68bb ldr r3, [r7, #8] + 8004b18: 627b str r3, [r7, #36] ; 0x24 + + pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); + 8004b1a: 88fb ldrh r3, [r7, #6] + 8004b1c: 005a lsls r2, r3, #1 + 8004b1e: 69fb ldr r3, [r7, #28] + 8004b20: 4413 add r3, r2 + 8004b22: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8004b26: 62bb str r3, [r7, #40] ; 0x28 + + for (i = n; i != 0U; i--) + 8004b28: 6a3b ldr r3, [r7, #32] + 8004b2a: 62fb str r3, [r7, #44] ; 0x2c + 8004b2c: e01e b.n 8004b6c + { + temp1 = *pBuf; + 8004b2e: 6a7b ldr r3, [r7, #36] ; 0x24 + 8004b30: 781b ldrb r3, [r3, #0] + 8004b32: 61bb str r3, [r7, #24] + pBuf++; + 8004b34: 6a7b ldr r3, [r7, #36] ; 0x24 + 8004b36: 3301 adds r3, #1 + 8004b38: 627b str r3, [r7, #36] ; 0x24 + temp2 = temp1 | ((uint16_t)((uint16_t) *pBuf << 8)); + 8004b3a: 6a7b ldr r3, [r7, #36] ; 0x24 + 8004b3c: 781b ldrb r3, [r3, #0] + 8004b3e: b29b uxth r3, r3 + 8004b40: 021b lsls r3, r3, #8 + 8004b42: b29b uxth r3, r3 + 8004b44: 461a mov r2, r3 + 8004b46: 69bb ldr r3, [r7, #24] + 8004b48: 4313 orrs r3, r2 + 8004b4a: 617b str r3, [r7, #20] + *pdwVal = (uint16_t)temp2; + 8004b4c: 697b ldr r3, [r7, #20] + 8004b4e: b29a uxth r2, r3 + 8004b50: 6abb ldr r3, [r7, #40] ; 0x28 + 8004b52: 801a strh r2, [r3, #0] + pdwVal++; + 8004b54: 6abb ldr r3, [r7, #40] ; 0x28 + 8004b56: 3302 adds r3, #2 + 8004b58: 62bb str r3, [r7, #40] ; 0x28 + +#if PMA_ACCESS > 1U + pdwVal++; + 8004b5a: 6abb ldr r3, [r7, #40] ; 0x28 + 8004b5c: 3302 adds r3, #2 + 8004b5e: 62bb str r3, [r7, #40] ; 0x28 +#endif + + pBuf++; + 8004b60: 6a7b ldr r3, [r7, #36] ; 0x24 + 8004b62: 3301 adds r3, #1 + 8004b64: 627b str r3, [r7, #36] ; 0x24 + for (i = n; i != 0U; i--) + 8004b66: 6afb ldr r3, [r7, #44] ; 0x2c + 8004b68: 3b01 subs r3, #1 + 8004b6a: 62fb str r3, [r7, #44] ; 0x2c + 8004b6c: 6afb ldr r3, [r7, #44] ; 0x2c + 8004b6e: 2b00 cmp r3, #0 + 8004b70: d1dd bne.n 8004b2e + } +} + 8004b72: bf00 nop + 8004b74: 3734 adds r7, #52 ; 0x34 + 8004b76: 46bd mov sp, r7 + 8004b78: bc80 pop {r7} + 8004b7a: 4770 bx lr + +08004b7c : + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + 8004b7c: b480 push {r7} + 8004b7e: b08b sub sp, #44 ; 0x2c + 8004b80: af00 add r7, sp, #0 + 8004b82: 60f8 str r0, [r7, #12] + 8004b84: 60b9 str r1, [r7, #8] + 8004b86: 4611 mov r1, r2 + 8004b88: 461a mov r2, r3 + 8004b8a: 460b mov r3, r1 + 8004b8c: 80fb strh r3, [r7, #6] + 8004b8e: 4613 mov r3, r2 + 8004b90: 80bb strh r3, [r7, #4] + uint32_t n = (uint32_t)wNBytes >> 1; + 8004b92: 88bb ldrh r3, [r7, #4] + 8004b94: 085b lsrs r3, r3, #1 + 8004b96: b29b uxth r3, r3 + 8004b98: 61bb str r3, [r7, #24] + uint32_t BaseAddr = (uint32_t)USBx; + 8004b9a: 68fb ldr r3, [r7, #12] + 8004b9c: 617b str r3, [r7, #20] + uint32_t i, temp; + __IO uint16_t *pdwVal; + uint8_t *pBuf = pbUsrBuf; + 8004b9e: 68bb ldr r3, [r7, #8] + 8004ba0: 61fb str r3, [r7, #28] + + pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); + 8004ba2: 88fb ldrh r3, [r7, #6] + 8004ba4: 005a lsls r2, r3, #1 + 8004ba6: 697b ldr r3, [r7, #20] + 8004ba8: 4413 add r3, r2 + 8004baa: f503 6380 add.w r3, r3, #1024 ; 0x400 + 8004bae: 623b str r3, [r7, #32] + + for (i = n; i != 0U; i--) + 8004bb0: 69bb ldr r3, [r7, #24] + 8004bb2: 627b str r3, [r7, #36] ; 0x24 + 8004bb4: e01b b.n 8004bee + { + temp = *(__IO uint16_t *)pdwVal; + 8004bb6: 6a3b ldr r3, [r7, #32] + 8004bb8: 881b ldrh r3, [r3, #0] + 8004bba: b29b uxth r3, r3 + 8004bbc: 613b str r3, [r7, #16] + pdwVal++; + 8004bbe: 6a3b ldr r3, [r7, #32] + 8004bc0: 3302 adds r3, #2 + 8004bc2: 623b str r3, [r7, #32] + *pBuf = (uint8_t)((temp >> 0) & 0xFFU); + 8004bc4: 693b ldr r3, [r7, #16] + 8004bc6: b2da uxtb r2, r3 + 8004bc8: 69fb ldr r3, [r7, #28] + 8004bca: 701a strb r2, [r3, #0] + pBuf++; + 8004bcc: 69fb ldr r3, [r7, #28] + 8004bce: 3301 adds r3, #1 + 8004bd0: 61fb str r3, [r7, #28] + *pBuf = (uint8_t)((temp >> 8) & 0xFFU); + 8004bd2: 693b ldr r3, [r7, #16] + 8004bd4: 0a1b lsrs r3, r3, #8 + 8004bd6: b2da uxtb r2, r3 + 8004bd8: 69fb ldr r3, [r7, #28] + 8004bda: 701a strb r2, [r3, #0] + pBuf++; + 8004bdc: 69fb ldr r3, [r7, #28] + 8004bde: 3301 adds r3, #1 + 8004be0: 61fb str r3, [r7, #28] + +#if PMA_ACCESS > 1U + pdwVal++; + 8004be2: 6a3b ldr r3, [r7, #32] + 8004be4: 3302 adds r3, #2 + 8004be6: 623b str r3, [r7, #32] + for (i = n; i != 0U; i--) + 8004be8: 6a7b ldr r3, [r7, #36] ; 0x24 + 8004bea: 3b01 subs r3, #1 + 8004bec: 627b str r3, [r7, #36] ; 0x24 + 8004bee: 6a7b ldr r3, [r7, #36] ; 0x24 + 8004bf0: 2b00 cmp r3, #0 + 8004bf2: d1e0 bne.n 8004bb6 +#endif + } + + if ((wNBytes % 2U) != 0U) + 8004bf4: 88bb ldrh r3, [r7, #4] + 8004bf6: f003 0301 and.w r3, r3, #1 + 8004bfa: b29b uxth r3, r3 + 8004bfc: 2b00 cmp r3, #0 + 8004bfe: d007 beq.n 8004c10 + { + temp = *pdwVal; + 8004c00: 6a3b ldr r3, [r7, #32] + 8004c02: 881b ldrh r3, [r3, #0] + 8004c04: b29b uxth r3, r3 + 8004c06: 613b str r3, [r7, #16] + *pBuf = (uint8_t)((temp >> 0) & 0xFFU); + 8004c08: 693b ldr r3, [r7, #16] + 8004c0a: b2da uxtb r2, r3 + 8004c0c: 69fb ldr r3, [r7, #28] + 8004c0e: 701a strb r2, [r3, #0] + } +} + 8004c10: bf00 nop + 8004c12: 372c adds r7, #44 ; 0x2c + 8004c14: 46bd mov sp, r7 + 8004c16: bc80 pop {r7} + 8004c18: 4770 bx lr + +08004c1a : + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + 8004c1a: b580 push {r7, lr} + 8004c1c: b084 sub sp, #16 + 8004c1e: af00 add r7, sp, #0 + 8004c20: 6078 str r0, [r7, #4] + 8004c22: 460b mov r3, r1 + 8004c24: 70fb strb r3, [r7, #3] + uint8_t ret = 0U; + 8004c26: 2300 movs r3, #0 + 8004c28: 73fb strb r3, [r7, #15] + USBD_CDC_HandleTypeDef *hcdc; + + if (pdev->dev_speed == USBD_SPEED_HIGH) + 8004c2a: 687b ldr r3, [r7, #4] + 8004c2c: 7c1b ldrb r3, [r3, #16] + 8004c2e: 2b00 cmp r3, #0 + 8004c30: d115 bne.n 8004c5e + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK, + 8004c32: f44f 7300 mov.w r3, #512 ; 0x200 + 8004c36: 2202 movs r2, #2 + 8004c38: 2181 movs r1, #129 ; 0x81 + 8004c3a: 6878 ldr r0, [r7, #4] + 8004c3c: f001 fe7d bl 800693a + CDC_DATA_HS_IN_PACKET_SIZE); + + pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U; + 8004c40: 687b ldr r3, [r7, #4] + 8004c42: 2201 movs r2, #1 + 8004c44: 62da str r2, [r3, #44] ; 0x2c + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK, + 8004c46: f44f 7300 mov.w r3, #512 ; 0x200 + 8004c4a: 2202 movs r2, #2 + 8004c4c: 2101 movs r1, #1 + 8004c4e: 6878 ldr r0, [r7, #4] + 8004c50: f001 fe73 bl 800693a + CDC_DATA_HS_OUT_PACKET_SIZE); + + pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U; + 8004c54: 687b ldr r3, [r7, #4] + 8004c56: 2201 movs r2, #1 + 8004c58: f8c3 216c str.w r2, [r3, #364] ; 0x16c + 8004c5c: e012 b.n 8004c84 + + } + else + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK, + 8004c5e: 2340 movs r3, #64 ; 0x40 + 8004c60: 2202 movs r2, #2 + 8004c62: 2181 movs r1, #129 ; 0x81 + 8004c64: 6878 ldr r0, [r7, #4] + 8004c66: f001 fe68 bl 800693a + CDC_DATA_FS_IN_PACKET_SIZE); + + pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U; + 8004c6a: 687b ldr r3, [r7, #4] + 8004c6c: 2201 movs r2, #1 + 8004c6e: 62da str r2, [r3, #44] ; 0x2c + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK, + 8004c70: 2340 movs r3, #64 ; 0x40 + 8004c72: 2202 movs r2, #2 + 8004c74: 2101 movs r1, #1 + 8004c76: 6878 ldr r0, [r7, #4] + 8004c78: f001 fe5f bl 800693a + CDC_DATA_FS_OUT_PACKET_SIZE); + + pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U; + 8004c7c: 687b ldr r3, [r7, #4] + 8004c7e: 2201 movs r2, #1 + 8004c80: f8c3 216c str.w r2, [r3, #364] ; 0x16c + } + /* Open Command IN EP */ + USBD_LL_OpenEP(pdev, CDC_CMD_EP, USBD_EP_TYPE_INTR, CDC_CMD_PACKET_SIZE); + 8004c84: 2308 movs r3, #8 + 8004c86: 2203 movs r2, #3 + 8004c88: 2182 movs r1, #130 ; 0x82 + 8004c8a: 6878 ldr r0, [r7, #4] + 8004c8c: f001 fe55 bl 800693a + pdev->ep_in[CDC_CMD_EP & 0xFU].is_used = 1U; + 8004c90: 687b ldr r3, [r7, #4] + 8004c92: 2201 movs r2, #1 + 8004c94: 641a str r2, [r3, #64] ; 0x40 + + pdev->pClassData = USBD_malloc(sizeof(USBD_CDC_HandleTypeDef)); + 8004c96: f44f 7007 mov.w r0, #540 ; 0x21c + 8004c9a: f001 ff75 bl 8006b88 + 8004c9e: 4602 mov r2, r0 + 8004ca0: 687b ldr r3, [r7, #4] + 8004ca2: f8c3 22b8 str.w r2, [r3, #696] ; 0x2b8 + + if (pdev->pClassData == NULL) + 8004ca6: 687b ldr r3, [r7, #4] + 8004ca8: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004cac: 2b00 cmp r3, #0 + 8004cae: d102 bne.n 8004cb6 + { + ret = 1U; + 8004cb0: 2301 movs r3, #1 + 8004cb2: 73fb strb r3, [r7, #15] + 8004cb4: e026 b.n 8004d04 + } + else + { + hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 8004cb6: 687b ldr r3, [r7, #4] + 8004cb8: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004cbc: 60bb str r3, [r7, #8] + + /* Init physical Interface components */ + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init(); + 8004cbe: 687b ldr r3, [r7, #4] + 8004cc0: f8d3 32bc ldr.w r3, [r3, #700] ; 0x2bc + 8004cc4: 681b ldr r3, [r3, #0] + 8004cc6: 4798 blx r3 + + /* Init Xfer states */ + hcdc->TxState = 0U; + 8004cc8: 68bb ldr r3, [r7, #8] + 8004cca: 2200 movs r2, #0 + 8004ccc: f8c3 2214 str.w r2, [r3, #532] ; 0x214 + hcdc->RxState = 0U; + 8004cd0: 68bb ldr r3, [r7, #8] + 8004cd2: 2200 movs r2, #0 + 8004cd4: f8c3 2218 str.w r2, [r3, #536] ; 0x218 + + if (pdev->dev_speed == USBD_SPEED_HIGH) + 8004cd8: 687b ldr r3, [r7, #4] + 8004cda: 7c1b ldrb r3, [r3, #16] + 8004cdc: 2b00 cmp r3, #0 + 8004cde: d109 bne.n 8004cf4 + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer, + 8004ce0: 68bb ldr r3, [r7, #8] + 8004ce2: f8d3 2204 ldr.w r2, [r3, #516] ; 0x204 + 8004ce6: f44f 7300 mov.w r3, #512 ; 0x200 + 8004cea: 2101 movs r1, #1 + 8004cec: 6878 ldr r0, [r7, #4] + 8004cee: f001 ff15 bl 8006b1c + 8004cf2: e007 b.n 8004d04 + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer, + 8004cf4: 68bb ldr r3, [r7, #8] + 8004cf6: f8d3 2204 ldr.w r2, [r3, #516] ; 0x204 + 8004cfa: 2340 movs r3, #64 ; 0x40 + 8004cfc: 2101 movs r1, #1 + 8004cfe: 6878 ldr r0, [r7, #4] + 8004d00: f001 ff0c bl 8006b1c + CDC_DATA_FS_OUT_PACKET_SIZE); + } + } + return ret; + 8004d04: 7bfb ldrb r3, [r7, #15] +} + 8004d06: 4618 mov r0, r3 + 8004d08: 3710 adds r7, #16 + 8004d0a: 46bd mov sp, r7 + 8004d0c: bd80 pop {r7, pc} + +08004d0e : + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + 8004d0e: b580 push {r7, lr} + 8004d10: b084 sub sp, #16 + 8004d12: af00 add r7, sp, #0 + 8004d14: 6078 str r0, [r7, #4] + 8004d16: 460b mov r3, r1 + 8004d18: 70fb strb r3, [r7, #3] + uint8_t ret = 0U; + 8004d1a: 2300 movs r3, #0 + 8004d1c: 73fb strb r3, [r7, #15] + + /* Close EP IN */ + USBD_LL_CloseEP(pdev, CDC_IN_EP); + 8004d1e: 2181 movs r1, #129 ; 0x81 + 8004d20: 6878 ldr r0, [r7, #4] + 8004d22: f001 fe30 bl 8006986 + pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 0U; + 8004d26: 687b ldr r3, [r7, #4] + 8004d28: 2200 movs r2, #0 + 8004d2a: 62da str r2, [r3, #44] ; 0x2c + + /* Close EP OUT */ + USBD_LL_CloseEP(pdev, CDC_OUT_EP); + 8004d2c: 2101 movs r1, #1 + 8004d2e: 6878 ldr r0, [r7, #4] + 8004d30: f001 fe29 bl 8006986 + pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 0U; + 8004d34: 687b ldr r3, [r7, #4] + 8004d36: 2200 movs r2, #0 + 8004d38: f8c3 216c str.w r2, [r3, #364] ; 0x16c + + /* Close Command IN EP */ + USBD_LL_CloseEP(pdev, CDC_CMD_EP); + 8004d3c: 2182 movs r1, #130 ; 0x82 + 8004d3e: 6878 ldr r0, [r7, #4] + 8004d40: f001 fe21 bl 8006986 + pdev->ep_in[CDC_CMD_EP & 0xFU].is_used = 0U; + 8004d44: 687b ldr r3, [r7, #4] + 8004d46: 2200 movs r2, #0 + 8004d48: 641a str r2, [r3, #64] ; 0x40 + + /* DeInit physical Interface components */ + if (pdev->pClassData != NULL) + 8004d4a: 687b ldr r3, [r7, #4] + 8004d4c: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004d50: 2b00 cmp r3, #0 + 8004d52: d00e beq.n 8004d72 + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit(); + 8004d54: 687b ldr r3, [r7, #4] + 8004d56: f8d3 32bc ldr.w r3, [r3, #700] ; 0x2bc + 8004d5a: 685b ldr r3, [r3, #4] + 8004d5c: 4798 blx r3 + USBD_free(pdev->pClassData); + 8004d5e: 687b ldr r3, [r7, #4] + 8004d60: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004d64: 4618 mov r0, r3 + 8004d66: f001 ff1b bl 8006ba0 + pdev->pClassData = NULL; + 8004d6a: 687b ldr r3, [r7, #4] + 8004d6c: 2200 movs r2, #0 + 8004d6e: f8c3 22b8 str.w r2, [r3, #696] ; 0x2b8 + } + + return ret; + 8004d72: 7bfb ldrb r3, [r7, #15] +} + 8004d74: 4618 mov r0, r3 + 8004d76: 3710 adds r7, #16 + 8004d78: 46bd mov sp, r7 + 8004d7a: bd80 pop {r7, pc} + +08004d7c : + * @param req: usb requests + * @retval status + */ +static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 8004d7c: b580 push {r7, lr} + 8004d7e: b086 sub sp, #24 + 8004d80: af00 add r7, sp, #0 + 8004d82: 6078 str r0, [r7, #4] + 8004d84: 6039 str r1, [r7, #0] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 8004d86: 687b ldr r3, [r7, #4] + 8004d88: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004d8c: 613b str r3, [r7, #16] + uint8_t ifalt = 0U; + 8004d8e: 2300 movs r3, #0 + 8004d90: 73fb strb r3, [r7, #15] + uint16_t status_info = 0U; + 8004d92: 2300 movs r3, #0 + 8004d94: 81bb strh r3, [r7, #12] + uint8_t ret = USBD_OK; + 8004d96: 2300 movs r3, #0 + 8004d98: 75fb strb r3, [r7, #23] + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + 8004d9a: 683b ldr r3, [r7, #0] + 8004d9c: 781b ldrb r3, [r3, #0] + 8004d9e: f003 0360 and.w r3, r3, #96 ; 0x60 + 8004da2: 2b00 cmp r3, #0 + 8004da4: d039 beq.n 8004e1a + 8004da6: 2b20 cmp r3, #32 + 8004da8: d17c bne.n 8004ea4 + { + case USB_REQ_TYPE_CLASS : + if (req->wLength) + 8004daa: 683b ldr r3, [r7, #0] + 8004dac: 88db ldrh r3, [r3, #6] + 8004dae: 2b00 cmp r3, #0 + 8004db0: d029 beq.n 8004e06 + { + if (req->bmRequest & 0x80U) + 8004db2: 683b ldr r3, [r7, #0] + 8004db4: 781b ldrb r3, [r3, #0] + 8004db6: b25b sxtb r3, r3 + 8004db8: 2b00 cmp r3, #0 + 8004dba: da11 bge.n 8004de0 + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + 8004dbc: 687b ldr r3, [r7, #4] + 8004dbe: f8d3 32bc ldr.w r3, [r3, #700] ; 0x2bc + 8004dc2: 689b ldr r3, [r3, #8] + 8004dc4: 683a ldr r2, [r7, #0] + 8004dc6: 7850 ldrb r0, [r2, #1] + (uint8_t *)(void *)hcdc->data, + 8004dc8: 6939 ldr r1, [r7, #16] + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + 8004dca: 683a ldr r2, [r7, #0] + 8004dcc: 88d2 ldrh r2, [r2, #6] + 8004dce: 4798 blx r3 + req->wLength); + + USBD_CtlSendData(pdev, (uint8_t *)(void *)hcdc->data, req->wLength); + 8004dd0: 6939 ldr r1, [r7, #16] + 8004dd2: 683b ldr r3, [r7, #0] + 8004dd4: 88db ldrh r3, [r3, #6] + 8004dd6: 461a mov r2, r3 + 8004dd8: 6878 ldr r0, [r7, #4] + 8004dda: f001 f9f9 bl 80061d0 + else + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t *)(void *)req, 0U); + } + break; + 8004dde: e068 b.n 8004eb2 + hcdc->CmdOpCode = req->bRequest; + 8004de0: 683b ldr r3, [r7, #0] + 8004de2: 785a ldrb r2, [r3, #1] + 8004de4: 693b ldr r3, [r7, #16] + 8004de6: f883 2200 strb.w r2, [r3, #512] ; 0x200 + hcdc->CmdLength = (uint8_t)req->wLength; + 8004dea: 683b ldr r3, [r7, #0] + 8004dec: 88db ldrh r3, [r3, #6] + 8004dee: b2da uxtb r2, r3 + 8004df0: 693b ldr r3, [r7, #16] + 8004df2: f883 2201 strb.w r2, [r3, #513] ; 0x201 + USBD_CtlPrepareRx(pdev, (uint8_t *)(void *)hcdc->data, req->wLength); + 8004df6: 6939 ldr r1, [r7, #16] + 8004df8: 683b ldr r3, [r7, #0] + 8004dfa: 88db ldrh r3, [r3, #6] + 8004dfc: 461a mov r2, r3 + 8004dfe: 6878 ldr r0, [r7, #4] + 8004e00: f001 fa14 bl 800622c + break; + 8004e04: e055 b.n 8004eb2 + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + 8004e06: 687b ldr r3, [r7, #4] + 8004e08: f8d3 32bc ldr.w r3, [r3, #700] ; 0x2bc + 8004e0c: 689b ldr r3, [r3, #8] + 8004e0e: 683a ldr r2, [r7, #0] + 8004e10: 7850 ldrb r0, [r2, #1] + 8004e12: 2200 movs r2, #0 + 8004e14: 6839 ldr r1, [r7, #0] + 8004e16: 4798 blx r3 + break; + 8004e18: e04b b.n 8004eb2 + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + 8004e1a: 683b ldr r3, [r7, #0] + 8004e1c: 785b ldrb r3, [r3, #1] + 8004e1e: 2b0a cmp r3, #10 + 8004e20: d017 beq.n 8004e52 + 8004e22: 2b0b cmp r3, #11 + 8004e24: d029 beq.n 8004e7a + 8004e26: 2b00 cmp r3, #0 + 8004e28: d133 bne.n 8004e92 + { + case USB_REQ_GET_STATUS: + if (pdev->dev_state == USBD_STATE_CONFIGURED) + 8004e2a: 687b ldr r3, [r7, #4] + 8004e2c: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8004e30: 2b03 cmp r3, #3 + 8004e32: d107 bne.n 8004e44 + { + USBD_CtlSendData(pdev, (uint8_t *)(void *)&status_info, 2U); + 8004e34: f107 030c add.w r3, r7, #12 + 8004e38: 2202 movs r2, #2 + 8004e3a: 4619 mov r1, r3 + 8004e3c: 6878 ldr r0, [r7, #4] + 8004e3e: f001 f9c7 bl 80061d0 + else + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + 8004e42: e02e b.n 8004ea2 + USBD_CtlError(pdev, req); + 8004e44: 6839 ldr r1, [r7, #0] + 8004e46: 6878 ldr r0, [r7, #4] + 8004e48: f001 f958 bl 80060fc + ret = USBD_FAIL; + 8004e4c: 2302 movs r3, #2 + 8004e4e: 75fb strb r3, [r7, #23] + break; + 8004e50: e027 b.n 8004ea2 + + case USB_REQ_GET_INTERFACE: + if (pdev->dev_state == USBD_STATE_CONFIGURED) + 8004e52: 687b ldr r3, [r7, #4] + 8004e54: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8004e58: 2b03 cmp r3, #3 + 8004e5a: d107 bne.n 8004e6c + { + USBD_CtlSendData(pdev, &ifalt, 1U); + 8004e5c: f107 030f add.w r3, r7, #15 + 8004e60: 2201 movs r2, #1 + 8004e62: 4619 mov r1, r3 + 8004e64: 6878 ldr r0, [r7, #4] + 8004e66: f001 f9b3 bl 80061d0 + else + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + 8004e6a: e01a b.n 8004ea2 + USBD_CtlError(pdev, req); + 8004e6c: 6839 ldr r1, [r7, #0] + 8004e6e: 6878 ldr r0, [r7, #4] + 8004e70: f001 f944 bl 80060fc + ret = USBD_FAIL; + 8004e74: 2302 movs r3, #2 + 8004e76: 75fb strb r3, [r7, #23] + break; + 8004e78: e013 b.n 8004ea2 + + case USB_REQ_SET_INTERFACE: + if (pdev->dev_state != USBD_STATE_CONFIGURED) + 8004e7a: 687b ldr r3, [r7, #4] + 8004e7c: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8004e80: 2b03 cmp r3, #3 + 8004e82: d00d beq.n 8004ea0 + { + USBD_CtlError(pdev, req); + 8004e84: 6839 ldr r1, [r7, #0] + 8004e86: 6878 ldr r0, [r7, #4] + 8004e88: f001 f938 bl 80060fc + ret = USBD_FAIL; + 8004e8c: 2302 movs r3, #2 + 8004e8e: 75fb strb r3, [r7, #23] + } + break; + 8004e90: e006 b.n 8004ea0 + + default: + USBD_CtlError(pdev, req); + 8004e92: 6839 ldr r1, [r7, #0] + 8004e94: 6878 ldr r0, [r7, #4] + 8004e96: f001 f931 bl 80060fc + ret = USBD_FAIL; + 8004e9a: 2302 movs r3, #2 + 8004e9c: 75fb strb r3, [r7, #23] + break; + 8004e9e: e000 b.n 8004ea2 + break; + 8004ea0: bf00 nop + } + break; + 8004ea2: e006 b.n 8004eb2 + + default: + USBD_CtlError(pdev, req); + 8004ea4: 6839 ldr r1, [r7, #0] + 8004ea6: 6878 ldr r0, [r7, #4] + 8004ea8: f001 f928 bl 80060fc + ret = USBD_FAIL; + 8004eac: 2302 movs r3, #2 + 8004eae: 75fb strb r3, [r7, #23] + break; + 8004eb0: bf00 nop + } + + return ret; + 8004eb2: 7dfb ldrb r3, [r7, #23] +} + 8004eb4: 4618 mov r0, r3 + 8004eb6: 3718 adds r7, #24 + 8004eb8: 46bd mov sp, r7 + 8004eba: bd80 pop {r7, pc} + +08004ebc : + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + 8004ebc: b580 push {r7, lr} + 8004ebe: b084 sub sp, #16 + 8004ec0: af00 add r7, sp, #0 + 8004ec2: 6078 str r0, [r7, #4] + 8004ec4: 460b mov r3, r1 + 8004ec6: 70fb strb r3, [r7, #3] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassData; + 8004ec8: 687b ldr r3, [r7, #4] + 8004eca: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004ece: 60fb str r3, [r7, #12] + PCD_HandleTypeDef *hpcd = pdev->pData; + 8004ed0: 687b ldr r3, [r7, #4] + 8004ed2: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 8004ed6: 60bb str r3, [r7, #8] + + if (pdev->pClassData != NULL) + 8004ed8: 687b ldr r3, [r7, #4] + 8004eda: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004ede: 2b00 cmp r3, #0 + 8004ee0: d03a beq.n 8004f58 + { + if ((pdev->ep_in[epnum].total_length > 0U) && ((pdev->ep_in[epnum].total_length % hpcd->IN_ep[epnum].maxpacket) == 0U)) + 8004ee2: 78fa ldrb r2, [r7, #3] + 8004ee4: 6879 ldr r1, [r7, #4] + 8004ee6: 4613 mov r3, r2 + 8004ee8: 009b lsls r3, r3, #2 + 8004eea: 4413 add r3, r2 + 8004eec: 009b lsls r3, r3, #2 + 8004eee: 440b add r3, r1 + 8004ef0: 331c adds r3, #28 + 8004ef2: 681b ldr r3, [r3, #0] + 8004ef4: 2b00 cmp r3, #0 + 8004ef6: d029 beq.n 8004f4c + 8004ef8: 78fa ldrb r2, [r7, #3] + 8004efa: 6879 ldr r1, [r7, #4] + 8004efc: 4613 mov r3, r2 + 8004efe: 009b lsls r3, r3, #2 + 8004f00: 4413 add r3, r2 + 8004f02: 009b lsls r3, r3, #2 + 8004f04: 440b add r3, r1 + 8004f06: 331c adds r3, #28 + 8004f08: 681a ldr r2, [r3, #0] + 8004f0a: 78f9 ldrb r1, [r7, #3] + 8004f0c: 68b8 ldr r0, [r7, #8] + 8004f0e: 460b mov r3, r1 + 8004f10: 009b lsls r3, r3, #2 + 8004f12: 440b add r3, r1 + 8004f14: 00db lsls r3, r3, #3 + 8004f16: 4403 add r3, r0 + 8004f18: 3338 adds r3, #56 ; 0x38 + 8004f1a: 681b ldr r3, [r3, #0] + 8004f1c: fbb2 f1f3 udiv r1, r2, r3 + 8004f20: fb03 f301 mul.w r3, r3, r1 + 8004f24: 1ad3 subs r3, r2, r3 + 8004f26: 2b00 cmp r3, #0 + 8004f28: d110 bne.n 8004f4c + { + /* Update the packet total length */ + pdev->ep_in[epnum].total_length = 0U; + 8004f2a: 78fa ldrb r2, [r7, #3] + 8004f2c: 6879 ldr r1, [r7, #4] + 8004f2e: 4613 mov r3, r2 + 8004f30: 009b lsls r3, r3, #2 + 8004f32: 4413 add r3, r2 + 8004f34: 009b lsls r3, r3, #2 + 8004f36: 440b add r3, r1 + 8004f38: 331c adds r3, #28 + 8004f3a: 2200 movs r2, #0 + 8004f3c: 601a str r2, [r3, #0] + + /* Send ZLP */ + USBD_LL_Transmit(pdev, epnum, NULL, 0U); + 8004f3e: 78f9 ldrb r1, [r7, #3] + 8004f40: 2300 movs r3, #0 + 8004f42: 2200 movs r2, #0 + 8004f44: 6878 ldr r0, [r7, #4] + 8004f46: f001 fdc6 bl 8006ad6 + 8004f4a: e003 b.n 8004f54 + } + else + { + hcdc->TxState = 0U; + 8004f4c: 68fb ldr r3, [r7, #12] + 8004f4e: 2200 movs r2, #0 + 8004f50: f8c3 2214 str.w r2, [r3, #532] ; 0x214 + } + return USBD_OK; + 8004f54: 2300 movs r3, #0 + 8004f56: e000 b.n 8004f5a + } + else + { + return USBD_FAIL; + 8004f58: 2302 movs r3, #2 + } +} + 8004f5a: 4618 mov r0, r3 + 8004f5c: 3710 adds r7, #16 + 8004f5e: 46bd mov sp, r7 + 8004f60: bd80 pop {r7, pc} + +08004f62 : + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + 8004f62: b580 push {r7, lr} + 8004f64: b084 sub sp, #16 + 8004f66: af00 add r7, sp, #0 + 8004f68: 6078 str r0, [r7, #4] + 8004f6a: 460b mov r3, r1 + 8004f6c: 70fb strb r3, [r7, #3] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 8004f6e: 687b ldr r3, [r7, #4] + 8004f70: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004f74: 60fb str r3, [r7, #12] + + /* Get the received data length */ + hcdc->RxLength = USBD_LL_GetRxDataSize(pdev, epnum); + 8004f76: 78fb ldrb r3, [r7, #3] + 8004f78: 4619 mov r1, r3 + 8004f7a: 6878 ldr r0, [r7, #4] + 8004f7c: f001 fdf1 bl 8006b62 + 8004f80: 4602 mov r2, r0 + 8004f82: 68fb ldr r3, [r7, #12] + 8004f84: f8c3 220c str.w r2, [r3, #524] ; 0x20c + + /* USB data will be immediately processed, this allow next USB traffic being + NAKed till the end of the application Xfer */ + if (pdev->pClassData != NULL) + 8004f88: 687b ldr r3, [r7, #4] + 8004f8a: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004f8e: 2b00 cmp r3, #0 + 8004f90: d00d beq.n 8004fae + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength); + 8004f92: 687b ldr r3, [r7, #4] + 8004f94: f8d3 32bc ldr.w r3, [r3, #700] ; 0x2bc + 8004f98: 68db ldr r3, [r3, #12] + 8004f9a: 68fa ldr r2, [r7, #12] + 8004f9c: f8d2 0204 ldr.w r0, [r2, #516] ; 0x204 + 8004fa0: 68fa ldr r2, [r7, #12] + 8004fa2: f502 7203 add.w r2, r2, #524 ; 0x20c + 8004fa6: 4611 mov r1, r2 + 8004fa8: 4798 blx r3 + + return USBD_OK; + 8004faa: 2300 movs r3, #0 + 8004fac: e000 b.n 8004fb0 + } + else + { + return USBD_FAIL; + 8004fae: 2302 movs r3, #2 + } +} + 8004fb0: 4618 mov r0, r3 + 8004fb2: 3710 adds r7, #16 + 8004fb4: 46bd mov sp, r7 + 8004fb6: bd80 pop {r7, pc} + +08004fb8 : + * Handle EP0 Rx Ready event + * @param pdev: device instance + * @retval status + */ +static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev) +{ + 8004fb8: b580 push {r7, lr} + 8004fba: b084 sub sp, #16 + 8004fbc: af00 add r7, sp, #0 + 8004fbe: 6078 str r0, [r7, #4] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 8004fc0: 687b ldr r3, [r7, #4] + 8004fc2: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8004fc6: 60fb str r3, [r7, #12] + + if ((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFFU)) + 8004fc8: 687b ldr r3, [r7, #4] + 8004fca: f8d3 32bc ldr.w r3, [r3, #700] ; 0x2bc + 8004fce: 2b00 cmp r3, #0 + 8004fd0: d015 beq.n 8004ffe + 8004fd2: 68fb ldr r3, [r7, #12] + 8004fd4: f893 3200 ldrb.w r3, [r3, #512] ; 0x200 + 8004fd8: 2bff cmp r3, #255 ; 0xff + 8004fda: d010 beq.n 8004ffe + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode, + 8004fdc: 687b ldr r3, [r7, #4] + 8004fde: f8d3 32bc ldr.w r3, [r3, #700] ; 0x2bc + 8004fe2: 689b ldr r3, [r3, #8] + 8004fe4: 68fa ldr r2, [r7, #12] + 8004fe6: f892 0200 ldrb.w r0, [r2, #512] ; 0x200 + (uint8_t *)(void *)hcdc->data, + 8004fea: 68f9 ldr r1, [r7, #12] + (uint16_t)hcdc->CmdLength); + 8004fec: 68fa ldr r2, [r7, #12] + 8004fee: f892 2201 ldrb.w r2, [r2, #513] ; 0x201 + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode, + 8004ff2: b292 uxth r2, r2 + 8004ff4: 4798 blx r3 + hcdc->CmdOpCode = 0xFFU; + 8004ff6: 68fb ldr r3, [r7, #12] + 8004ff8: 22ff movs r2, #255 ; 0xff + 8004ffa: f883 2200 strb.w r2, [r3, #512] ; 0x200 + + } + return USBD_OK; + 8004ffe: 2300 movs r3, #0 +} + 8005000: 4618 mov r0, r3 + 8005002: 3710 adds r7, #16 + 8005004: 46bd mov sp, r7 + 8005006: bd80 pop {r7, pc} + +08005008 : + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length) +{ + 8005008: b480 push {r7} + 800500a: b083 sub sp, #12 + 800500c: af00 add r7, sp, #0 + 800500e: 6078 str r0, [r7, #4] + *length = sizeof(USBD_CDC_CfgFSDesc); + 8005010: 687b ldr r3, [r7, #4] + 8005012: 2243 movs r2, #67 ; 0x43 + 8005014: 801a strh r2, [r3, #0] + return USBD_CDC_CfgFSDesc; + 8005016: 4b03 ldr r3, [pc, #12] ; (8005024 ) +} + 8005018: 4618 mov r0, r3 + 800501a: 370c adds r7, #12 + 800501c: 46bd mov sp, r7 + 800501e: bc80 pop {r7} + 8005020: 4770 bx lr + 8005022: bf00 nop + 8005024: 20000094 .word 0x20000094 + +08005028 : + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length) +{ + 8005028: b480 push {r7} + 800502a: b083 sub sp, #12 + 800502c: af00 add r7, sp, #0 + 800502e: 6078 str r0, [r7, #4] + *length = sizeof(USBD_CDC_CfgHSDesc); + 8005030: 687b ldr r3, [r7, #4] + 8005032: 2243 movs r2, #67 ; 0x43 + 8005034: 801a strh r2, [r3, #0] + return USBD_CDC_CfgHSDesc; + 8005036: 4b03 ldr r3, [pc, #12] ; (8005044 ) +} + 8005038: 4618 mov r0, r3 + 800503a: 370c adds r7, #12 + 800503c: 46bd mov sp, r7 + 800503e: bc80 pop {r7} + 8005040: 4770 bx lr + 8005042: bf00 nop + 8005044: 20000050 .word 0x20000050 + +08005048 : + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length) +{ + 8005048: b480 push {r7} + 800504a: b083 sub sp, #12 + 800504c: af00 add r7, sp, #0 + 800504e: 6078 str r0, [r7, #4] + *length = sizeof(USBD_CDC_OtherSpeedCfgDesc); + 8005050: 687b ldr r3, [r7, #4] + 8005052: 2243 movs r2, #67 ; 0x43 + 8005054: 801a strh r2, [r3, #0] + return USBD_CDC_OtherSpeedCfgDesc; + 8005056: 4b03 ldr r3, [pc, #12] ; (8005064 ) +} + 8005058: 4618 mov r0, r3 + 800505a: 370c adds r7, #12 + 800505c: 46bd mov sp, r7 + 800505e: bc80 pop {r7} + 8005060: 4770 bx lr + 8005062: bf00 nop + 8005064: 200000d8 .word 0x200000d8 + +08005068 : +* return Device Qualifier descriptor +* @param length : pointer data length +* @retval pointer to descriptor buffer +*/ +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length) +{ + 8005068: b480 push {r7} + 800506a: b083 sub sp, #12 + 800506c: af00 add r7, sp, #0 + 800506e: 6078 str r0, [r7, #4] + *length = sizeof(USBD_CDC_DeviceQualifierDesc); + 8005070: 687b ldr r3, [r7, #4] + 8005072: 220a movs r2, #10 + 8005074: 801a strh r2, [r3, #0] + return USBD_CDC_DeviceQualifierDesc; + 8005076: 4b03 ldr r3, [pc, #12] ; (8005084 ) +} + 8005078: 4618 mov r0, r3 + 800507a: 370c adds r7, #12 + 800507c: 46bd mov sp, r7 + 800507e: bc80 pop {r7} + 8005080: 4770 bx lr + 8005082: bf00 nop + 8005084: 2000000c .word 0x2000000c + +08005088 : + * @param fops: CD Interface callback + * @retval status + */ +uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops) +{ + 8005088: b480 push {r7} + 800508a: b085 sub sp, #20 + 800508c: af00 add r7, sp, #0 + 800508e: 6078 str r0, [r7, #4] + 8005090: 6039 str r1, [r7, #0] + uint8_t ret = USBD_FAIL; + 8005092: 2302 movs r3, #2 + 8005094: 73fb strb r3, [r7, #15] + + if (fops != NULL) + 8005096: 683b ldr r3, [r7, #0] + 8005098: 2b00 cmp r3, #0 + 800509a: d005 beq.n 80050a8 + { + pdev->pUserData = fops; + 800509c: 687b ldr r3, [r7, #4] + 800509e: 683a ldr r2, [r7, #0] + 80050a0: f8c3 22bc str.w r2, [r3, #700] ; 0x2bc + ret = USBD_OK; + 80050a4: 2300 movs r3, #0 + 80050a6: 73fb strb r3, [r7, #15] + } + + return ret; + 80050a8: 7bfb ldrb r3, [r7, #15] +} + 80050aa: 4618 mov r0, r3 + 80050ac: 3714 adds r7, #20 + 80050ae: 46bd mov sp, r7 + 80050b0: bc80 pop {r7} + 80050b2: 4770 bx lr + +080050b4 : + * @retval status + */ +uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length) +{ + 80050b4: b480 push {r7} + 80050b6: b087 sub sp, #28 + 80050b8: af00 add r7, sp, #0 + 80050ba: 60f8 str r0, [r7, #12] + 80050bc: 60b9 str r1, [r7, #8] + 80050be: 4613 mov r3, r2 + 80050c0: 80fb strh r3, [r7, #6] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 80050c2: 68fb ldr r3, [r7, #12] + 80050c4: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 80050c8: 617b str r3, [r7, #20] + + hcdc->TxBuffer = pbuff; + 80050ca: 697b ldr r3, [r7, #20] + 80050cc: 68ba ldr r2, [r7, #8] + 80050ce: f8c3 2208 str.w r2, [r3, #520] ; 0x208 + hcdc->TxLength = length; + 80050d2: 88fa ldrh r2, [r7, #6] + 80050d4: 697b ldr r3, [r7, #20] + 80050d6: f8c3 2210 str.w r2, [r3, #528] ; 0x210 + + return USBD_OK; + 80050da: 2300 movs r3, #0 +} + 80050dc: 4618 mov r0, r3 + 80050de: 371c adds r7, #28 + 80050e0: 46bd mov sp, r7 + 80050e2: bc80 pop {r7} + 80050e4: 4770 bx lr + +080050e6 : + * @param pbuff: Rx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff) +{ + 80050e6: b480 push {r7} + 80050e8: b085 sub sp, #20 + 80050ea: af00 add r7, sp, #0 + 80050ec: 6078 str r0, [r7, #4] + 80050ee: 6039 str r1, [r7, #0] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 80050f0: 687b ldr r3, [r7, #4] + 80050f2: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 80050f6: 60fb str r3, [r7, #12] + + hcdc->RxBuffer = pbuff; + 80050f8: 68fb ldr r3, [r7, #12] + 80050fa: 683a ldr r2, [r7, #0] + 80050fc: f8c3 2204 str.w r2, [r3, #516] ; 0x204 + + return USBD_OK; + 8005100: 2300 movs r3, #0 +} + 8005102: 4618 mov r0, r3 + 8005104: 3714 adds r7, #20 + 8005106: 46bd mov sp, r7 + 8005108: bc80 pop {r7} + 800510a: 4770 bx lr + +0800510c : + * Transmit packet on IN endpoint + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev) +{ + 800510c: b580 push {r7, lr} + 800510e: b084 sub sp, #16 + 8005110: af00 add r7, sp, #0 + 8005112: 6078 str r0, [r7, #4] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 8005114: 687b ldr r3, [r7, #4] + 8005116: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 800511a: 60fb str r3, [r7, #12] + + if (pdev->pClassData != NULL) + 800511c: 687b ldr r3, [r7, #4] + 800511e: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8005122: 2b00 cmp r3, #0 + 8005124: d01c beq.n 8005160 + { + if (hcdc->TxState == 0U) + 8005126: 68fb ldr r3, [r7, #12] + 8005128: f8d3 3214 ldr.w r3, [r3, #532] ; 0x214 + 800512c: 2b00 cmp r3, #0 + 800512e: d115 bne.n 800515c + { + /* Tx Transfer in progress */ + hcdc->TxState = 1U; + 8005130: 68fb ldr r3, [r7, #12] + 8005132: 2201 movs r2, #1 + 8005134: f8c3 2214 str.w r2, [r3, #532] ; 0x214 + + /* Update the packet total length */ + pdev->ep_in[CDC_IN_EP & 0xFU].total_length = hcdc->TxLength; + 8005138: 68fb ldr r3, [r7, #12] + 800513a: f8d3 2210 ldr.w r2, [r3, #528] ; 0x210 + 800513e: 687b ldr r3, [r7, #4] + 8005140: 631a str r2, [r3, #48] ; 0x30 + + /* Transmit next packet */ + USBD_LL_Transmit(pdev, CDC_IN_EP, hcdc->TxBuffer, + 8005142: 68fb ldr r3, [r7, #12] + 8005144: f8d3 2208 ldr.w r2, [r3, #520] ; 0x208 + (uint16_t)hcdc->TxLength); + 8005148: 68fb ldr r3, [r7, #12] + 800514a: f8d3 3210 ldr.w r3, [r3, #528] ; 0x210 + USBD_LL_Transmit(pdev, CDC_IN_EP, hcdc->TxBuffer, + 800514e: b29b uxth r3, r3 + 8005150: 2181 movs r1, #129 ; 0x81 + 8005152: 6878 ldr r0, [r7, #4] + 8005154: f001 fcbf bl 8006ad6 + + return USBD_OK; + 8005158: 2300 movs r3, #0 + 800515a: e002 b.n 8005162 + } + else + { + return USBD_BUSY; + 800515c: 2301 movs r3, #1 + 800515e: e000 b.n 8005162 + } + } + else + { + return USBD_FAIL; + 8005160: 2302 movs r3, #2 + } +} + 8005162: 4618 mov r0, r3 + 8005164: 3710 adds r7, #16 + 8005166: 46bd mov sp, r7 + 8005168: bd80 pop {r7, pc} + +0800516a : + * prepare OUT Endpoint for reception + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev) +{ + 800516a: b580 push {r7, lr} + 800516c: b084 sub sp, #16 + 800516e: af00 add r7, sp, #0 + 8005170: 6078 str r0, [r7, #4] + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + 8005172: 687b ldr r3, [r7, #4] + 8005174: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8005178: 60fb str r3, [r7, #12] + + /* Suspend or Resume USB Out process */ + if (pdev->pClassData != NULL) + 800517a: 687b ldr r3, [r7, #4] + 800517c: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 8005180: 2b00 cmp r3, #0 + 8005182: d017 beq.n 80051b4 + { + if (pdev->dev_speed == USBD_SPEED_HIGH) + 8005184: 687b ldr r3, [r7, #4] + 8005186: 7c1b ldrb r3, [r3, #16] + 8005188: 2b00 cmp r3, #0 + 800518a: d109 bne.n 80051a0 + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + 800518c: 68fb ldr r3, [r7, #12] + 800518e: f8d3 2204 ldr.w r2, [r3, #516] ; 0x204 + 8005192: f44f 7300 mov.w r3, #512 ; 0x200 + 8005196: 2101 movs r1, #1 + 8005198: 6878 ldr r0, [r7, #4] + 800519a: f001 fcbf bl 8006b1c + 800519e: e007 b.n 80051b0 + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + 80051a0: 68fb ldr r3, [r7, #12] + 80051a2: f8d3 2204 ldr.w r2, [r3, #516] ; 0x204 + 80051a6: 2340 movs r3, #64 ; 0x40 + 80051a8: 2101 movs r1, #1 + 80051aa: 6878 ldr r0, [r7, #4] + 80051ac: f001 fcb6 bl 8006b1c + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + return USBD_OK; + 80051b0: 2300 movs r3, #0 + 80051b2: e000 b.n 80051b6 + } + else + { + return USBD_FAIL; + 80051b4: 2302 movs r3, #2 + } +} + 80051b6: 4618 mov r0, r3 + 80051b8: 3710 adds r7, #16 + 80051ba: 46bd mov sp, r7 + 80051bc: bd80 pop {r7, pc} + +080051be : +* @param id: Low level core index +* @retval None +*/ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, + USBD_DescriptorsTypeDef *pdesc, uint8_t id) +{ + 80051be: b580 push {r7, lr} + 80051c0: b084 sub sp, #16 + 80051c2: af00 add r7, sp, #0 + 80051c4: 60f8 str r0, [r7, #12] + 80051c6: 60b9 str r1, [r7, #8] + 80051c8: 4613 mov r3, r2 + 80051ca: 71fb strb r3, [r7, #7] + /* Check whether the USB Host handle is valid */ + if (pdev == NULL) + 80051cc: 68fb ldr r3, [r7, #12] + 80051ce: 2b00 cmp r3, #0 + 80051d0: d101 bne.n 80051d6 + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Invalid Device handle"); +#endif + return USBD_FAIL; + 80051d2: 2302 movs r3, #2 + 80051d4: e01a b.n 800520c + } + + /* Unlink previous class*/ + if (pdev->pClass != NULL) + 80051d6: 68fb ldr r3, [r7, #12] + 80051d8: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80051dc: 2b00 cmp r3, #0 + 80051de: d003 beq.n 80051e8 + { + pdev->pClass = NULL; + 80051e0: 68fb ldr r3, [r7, #12] + 80051e2: 2200 movs r2, #0 + 80051e4: f8c3 22b4 str.w r2, [r3, #692] ; 0x2b4 + } + + /* Assign USBD Descriptors */ + if (pdesc != NULL) + 80051e8: 68bb ldr r3, [r7, #8] + 80051ea: 2b00 cmp r3, #0 + 80051ec: d003 beq.n 80051f6 + { + pdev->pDesc = pdesc; + 80051ee: 68fb ldr r3, [r7, #12] + 80051f0: 68ba ldr r2, [r7, #8] + 80051f2: f8c3 22b0 str.w r2, [r3, #688] ; 0x2b0 + } + + /* Set Device initial State */ + pdev->dev_state = USBD_STATE_DEFAULT; + 80051f6: 68fb ldr r3, [r7, #12] + 80051f8: 2201 movs r2, #1 + 80051fa: f883 229c strb.w r2, [r3, #668] ; 0x29c + pdev->id = id; + 80051fe: 68fb ldr r3, [r7, #12] + 8005200: 79fa ldrb r2, [r7, #7] + 8005202: 701a strb r2, [r3, #0] + /* Initialize low level driver */ + USBD_LL_Init(pdev); + 8005204: 68f8 ldr r0, [r7, #12] + 8005206: f001 fb23 bl 8006850 + + return USBD_OK; + 800520a: 2300 movs r3, #0 +} + 800520c: 4618 mov r0, r3 + 800520e: 3710 adds r7, #16 + 8005210: 46bd mov sp, r7 + 8005212: bd80 pop {r7, pc} + +08005214 : + * @param pDevice : Device Handle + * @param pclass: Class handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass) +{ + 8005214: b480 push {r7} + 8005216: b085 sub sp, #20 + 8005218: af00 add r7, sp, #0 + 800521a: 6078 str r0, [r7, #4] + 800521c: 6039 str r1, [r7, #0] + USBD_StatusTypeDef status = USBD_OK; + 800521e: 2300 movs r3, #0 + 8005220: 73fb strb r3, [r7, #15] + if (pclass != NULL) + 8005222: 683b ldr r3, [r7, #0] + 8005224: 2b00 cmp r3, #0 + 8005226: d006 beq.n 8005236 + { + /* link the class to the USB Device handle */ + pdev->pClass = pclass; + 8005228: 687b ldr r3, [r7, #4] + 800522a: 683a ldr r2, [r7, #0] + 800522c: f8c3 22b4 str.w r2, [r3, #692] ; 0x2b4 + status = USBD_OK; + 8005230: 2300 movs r3, #0 + 8005232: 73fb strb r3, [r7, #15] + 8005234: e001 b.n 800523a + else + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Invalid Class handle"); +#endif + status = USBD_FAIL; + 8005236: 2302 movs r3, #2 + 8005238: 73fb strb r3, [r7, #15] + } + + return status; + 800523a: 7bfb ldrb r3, [r7, #15] +} + 800523c: 4618 mov r0, r3 + 800523e: 3714 adds r7, #20 + 8005240: 46bd mov sp, r7 + 8005242: bc80 pop {r7} + 8005244: 4770 bx lr + +08005246 : + * Start the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev) +{ + 8005246: b580 push {r7, lr} + 8005248: b082 sub sp, #8 + 800524a: af00 add r7, sp, #0 + 800524c: 6078 str r0, [r7, #4] + /* Start the low level driver */ + USBD_LL_Start(pdev); + 800524e: 6878 ldr r0, [r7, #4] + 8005250: f001 fb58 bl 8006904 + + return USBD_OK; + 8005254: 2300 movs r3, #0 +} + 8005256: 4618 mov r0, r3 + 8005258: 3708 adds r7, #8 + 800525a: 46bd mov sp, r7 + 800525c: bd80 pop {r7, pc} + +0800525e : +* Launch test mode process +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev) +{ + 800525e: b480 push {r7} + 8005260: b083 sub sp, #12 + 8005262: af00 add r7, sp, #0 + 8005264: 6078 str r0, [r7, #4] + /* Prevent unused argument compilation warning */ + UNUSED(pdev); + + return USBD_OK; + 8005266: 2300 movs r3, #0 +} + 8005268: 4618 mov r0, r3 + 800526a: 370c adds r7, #12 + 800526c: 46bd mov sp, r7 + 800526e: bc80 pop {r7} + 8005270: 4770 bx lr + +08005272 : +* @param cfgidx: configuration index +* @retval status +*/ + +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + 8005272: b580 push {r7, lr} + 8005274: b084 sub sp, #16 + 8005276: af00 add r7, sp, #0 + 8005278: 6078 str r0, [r7, #4] + 800527a: 460b mov r3, r1 + 800527c: 70fb strb r3, [r7, #3] + USBD_StatusTypeDef ret = USBD_FAIL; + 800527e: 2302 movs r3, #2 + 8005280: 73fb strb r3, [r7, #15] + + if (pdev->pClass != NULL) + 8005282: 687b ldr r3, [r7, #4] + 8005284: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005288: 2b00 cmp r3, #0 + 800528a: d00c beq.n 80052a6 + { + /* Set configuration and Start the Class*/ + if (pdev->pClass->Init(pdev, cfgidx) == 0U) + 800528c: 687b ldr r3, [r7, #4] + 800528e: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005292: 681b ldr r3, [r3, #0] + 8005294: 78fa ldrb r2, [r7, #3] + 8005296: 4611 mov r1, r2 + 8005298: 6878 ldr r0, [r7, #4] + 800529a: 4798 blx r3 + 800529c: 4603 mov r3, r0 + 800529e: 2b00 cmp r3, #0 + 80052a0: d101 bne.n 80052a6 + { + ret = USBD_OK; + 80052a2: 2300 movs r3, #0 + 80052a4: 73fb strb r3, [r7, #15] + } + } + + return ret; + 80052a6: 7bfb ldrb r3, [r7, #15] +} + 80052a8: 4618 mov r0, r3 + 80052aa: 3710 adds r7, #16 + 80052ac: 46bd mov sp, r7 + 80052ae: bd80 pop {r7, pc} + +080052b0 : +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status: USBD_StatusTypeDef +*/ +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + 80052b0: b580 push {r7, lr} + 80052b2: b082 sub sp, #8 + 80052b4: af00 add r7, sp, #0 + 80052b6: 6078 str r0, [r7, #4] + 80052b8: 460b mov r3, r1 + 80052ba: 70fb strb r3, [r7, #3] + /* Clear configuration and De-initialize the Class process*/ + pdev->pClass->DeInit(pdev, cfgidx); + 80052bc: 687b ldr r3, [r7, #4] + 80052be: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80052c2: 685b ldr r3, [r3, #4] + 80052c4: 78fa ldrb r2, [r7, #3] + 80052c6: 4611 mov r1, r2 + 80052c8: 6878 ldr r0, [r7, #4] + 80052ca: 4798 blx r3 + + return USBD_OK; + 80052cc: 2300 movs r3, #0 +} + 80052ce: 4618 mov r0, r3 + 80052d0: 3708 adds r7, #8 + 80052d2: 46bd mov sp, r7 + 80052d4: bd80 pop {r7, pc} + +080052d6 : +* Handle the setup stage +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup) +{ + 80052d6: b580 push {r7, lr} + 80052d8: b082 sub sp, #8 + 80052da: af00 add r7, sp, #0 + 80052dc: 6078 str r0, [r7, #4] + 80052de: 6039 str r1, [r7, #0] + USBD_ParseSetupRequest(&pdev->request, psetup); + 80052e0: 687b ldr r3, [r7, #4] + 80052e2: f503 732a add.w r3, r3, #680 ; 0x2a8 + 80052e6: 6839 ldr r1, [r7, #0] + 80052e8: 4618 mov r0, r3 + 80052ea: f000 fecb bl 8006084 + + pdev->ep0_state = USBD_EP0_SETUP; + 80052ee: 687b ldr r3, [r7, #4] + 80052f0: 2201 movs r2, #1 + 80052f2: f8c3 2294 str.w r2, [r3, #660] ; 0x294 + + pdev->ep0_data_len = pdev->request.wLength; + 80052f6: 687b ldr r3, [r7, #4] + 80052f8: f8b3 32ae ldrh.w r3, [r3, #686] ; 0x2ae + 80052fc: 461a mov r2, r3 + 80052fe: 687b ldr r3, [r7, #4] + 8005300: f8c3 2298 str.w r2, [r3, #664] ; 0x298 + + switch (pdev->request.bmRequest & 0x1FU) + 8005304: 687b ldr r3, [r7, #4] + 8005306: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 800530a: f003 031f and.w r3, r3, #31 + 800530e: 2b01 cmp r3, #1 + 8005310: d00c beq.n 800532c + 8005312: 2b01 cmp r3, #1 + 8005314: d302 bcc.n 800531c + 8005316: 2b02 cmp r3, #2 + 8005318: d010 beq.n 800533c + 800531a: e017 b.n 800534c + { + case USB_REQ_RECIPIENT_DEVICE: + USBD_StdDevReq(pdev, &pdev->request); + 800531c: 687b ldr r3, [r7, #4] + 800531e: f503 732a add.w r3, r3, #680 ; 0x2a8 + 8005322: 4619 mov r1, r3 + 8005324: 6878 ldr r0, [r7, #4] + 8005326: f000 f9cb bl 80056c0 + break; + 800532a: e01a b.n 8005362 + + case USB_REQ_RECIPIENT_INTERFACE: + USBD_StdItfReq(pdev, &pdev->request); + 800532c: 687b ldr r3, [r7, #4] + 800532e: f503 732a add.w r3, r3, #680 ; 0x2a8 + 8005332: 4619 mov r1, r3 + 8005334: 6878 ldr r0, [r7, #4] + 8005336: f000 fa2d bl 8005794 + break; + 800533a: e012 b.n 8005362 + + case USB_REQ_RECIPIENT_ENDPOINT: + USBD_StdEPReq(pdev, &pdev->request); + 800533c: 687b ldr r3, [r7, #4] + 800533e: f503 732a add.w r3, r3, #680 ; 0x2a8 + 8005342: 4619 mov r1, r3 + 8005344: 6878 ldr r0, [r7, #4] + 8005346: f000 fa6b bl 8005820 + break; + 800534a: e00a b.n 8005362 + + default: + USBD_LL_StallEP(pdev, (pdev->request.bmRequest & 0x80U)); + 800534c: 687b ldr r3, [r7, #4] + 800534e: f893 32a8 ldrb.w r3, [r3, #680] ; 0x2a8 + 8005352: f023 037f bic.w r3, r3, #127 ; 0x7f + 8005356: b2db uxtb r3, r3 + 8005358: 4619 mov r1, r3 + 800535a: 6878 ldr r0, [r7, #4] + 800535c: f001 fb32 bl 80069c4 + break; + 8005360: bf00 nop + } + + return USBD_OK; + 8005362: 2300 movs r3, #0 +} + 8005364: 4618 mov r0, r3 + 8005366: 3708 adds r7, #8 + 8005368: 46bd mov sp, r7 + 800536a: bd80 pop {r7, pc} + +0800536c : +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev, + uint8_t epnum, uint8_t *pdata) +{ + 800536c: b580 push {r7, lr} + 800536e: b086 sub sp, #24 + 8005370: af00 add r7, sp, #0 + 8005372: 60f8 str r0, [r7, #12] + 8005374: 460b mov r3, r1 + 8005376: 607a str r2, [r7, #4] + 8005378: 72fb strb r3, [r7, #11] + USBD_EndpointTypeDef *pep; + + if (epnum == 0U) + 800537a: 7afb ldrb r3, [r7, #11] + 800537c: 2b00 cmp r3, #0 + 800537e: d14b bne.n 8005418 + { + pep = &pdev->ep_out[0]; + 8005380: 68fb ldr r3, [r7, #12] + 8005382: f503 73aa add.w r3, r3, #340 ; 0x154 + 8005386: 617b str r3, [r7, #20] + + if (pdev->ep0_state == USBD_EP0_DATA_OUT) + 8005388: 68fb ldr r3, [r7, #12] + 800538a: f8d3 3294 ldr.w r3, [r3, #660] ; 0x294 + 800538e: 2b03 cmp r3, #3 + 8005390: d134 bne.n 80053fc + { + if (pep->rem_length > pep->maxpacket) + 8005392: 697b ldr r3, [r7, #20] + 8005394: 68da ldr r2, [r3, #12] + 8005396: 697b ldr r3, [r7, #20] + 8005398: 691b ldr r3, [r3, #16] + 800539a: 429a cmp r2, r3 + 800539c: d919 bls.n 80053d2 + { + pep->rem_length -= pep->maxpacket; + 800539e: 697b ldr r3, [r7, #20] + 80053a0: 68da ldr r2, [r3, #12] + 80053a2: 697b ldr r3, [r7, #20] + 80053a4: 691b ldr r3, [r3, #16] + 80053a6: 1ad2 subs r2, r2, r3 + 80053a8: 697b ldr r3, [r7, #20] + 80053aa: 60da str r2, [r3, #12] + + USBD_CtlContinueRx(pdev, pdata, + (uint16_t)MIN(pep->rem_length, pep->maxpacket)); + 80053ac: 697b ldr r3, [r7, #20] + 80053ae: 68da ldr r2, [r3, #12] + 80053b0: 697b ldr r3, [r7, #20] + 80053b2: 691b ldr r3, [r3, #16] + USBD_CtlContinueRx(pdev, pdata, + 80053b4: 429a cmp r2, r3 + 80053b6: d203 bcs.n 80053c0 + (uint16_t)MIN(pep->rem_length, pep->maxpacket)); + 80053b8: 697b ldr r3, [r7, #20] + 80053ba: 68db ldr r3, [r3, #12] + USBD_CtlContinueRx(pdev, pdata, + 80053bc: b29b uxth r3, r3 + 80053be: e002 b.n 80053c6 + (uint16_t)MIN(pep->rem_length, pep->maxpacket)); + 80053c0: 697b ldr r3, [r7, #20] + 80053c2: 691b ldr r3, [r3, #16] + USBD_CtlContinueRx(pdev, pdata, + 80053c4: b29b uxth r3, r3 + 80053c6: 461a mov r2, r3 + 80053c8: 6879 ldr r1, [r7, #4] + 80053ca: 68f8 ldr r0, [r7, #12] + 80053cc: f000 ff4c bl 8006268 + 80053d0: e038 b.n 8005444 + } + else + { + if ((pdev->pClass->EP0_RxReady != NULL) && + 80053d2: 68fb ldr r3, [r7, #12] + 80053d4: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80053d8: 691b ldr r3, [r3, #16] + 80053da: 2b00 cmp r3, #0 + 80053dc: d00a beq.n 80053f4 + (pdev->dev_state == USBD_STATE_CONFIGURED)) + 80053de: 68fb ldr r3, [r7, #12] + 80053e0: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + if ((pdev->pClass->EP0_RxReady != NULL) && + 80053e4: 2b03 cmp r3, #3 + 80053e6: d105 bne.n 80053f4 + { + pdev->pClass->EP0_RxReady(pdev); + 80053e8: 68fb ldr r3, [r7, #12] + 80053ea: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80053ee: 691b ldr r3, [r3, #16] + 80053f0: 68f8 ldr r0, [r7, #12] + 80053f2: 4798 blx r3 + } + USBD_CtlSendStatus(pdev); + 80053f4: 68f8 ldr r0, [r7, #12] + 80053f6: f000 ff49 bl 800628c + 80053fa: e023 b.n 8005444 + } + } + else + { + if (pdev->ep0_state == USBD_EP0_STATUS_OUT) + 80053fc: 68fb ldr r3, [r7, #12] + 80053fe: f8d3 3294 ldr.w r3, [r3, #660] ; 0x294 + 8005402: 2b05 cmp r3, #5 + 8005404: d11e bne.n 8005444 + { + /* + * STATUS PHASE completed, update ep0_state to idle + */ + pdev->ep0_state = USBD_EP0_IDLE; + 8005406: 68fb ldr r3, [r7, #12] + 8005408: 2200 movs r2, #0 + 800540a: f8c3 2294 str.w r2, [r3, #660] ; 0x294 + USBD_LL_StallEP(pdev, 0U); + 800540e: 2100 movs r1, #0 + 8005410: 68f8 ldr r0, [r7, #12] + 8005412: f001 fad7 bl 80069c4 + 8005416: e015 b.n 8005444 + } + } + } + else if ((pdev->pClass->DataOut != NULL) && + 8005418: 68fb ldr r3, [r7, #12] + 800541a: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 800541e: 699b ldr r3, [r3, #24] + 8005420: 2b00 cmp r3, #0 + 8005422: d00d beq.n 8005440 + (pdev->dev_state == USBD_STATE_CONFIGURED)) + 8005424: 68fb ldr r3, [r7, #12] + 8005426: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + else if ((pdev->pClass->DataOut != NULL) && + 800542a: 2b03 cmp r3, #3 + 800542c: d108 bne.n 8005440 + { + pdev->pClass->DataOut(pdev, epnum); + 800542e: 68fb ldr r3, [r7, #12] + 8005430: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005434: 699b ldr r3, [r3, #24] + 8005436: 7afa ldrb r2, [r7, #11] + 8005438: 4611 mov r1, r2 + 800543a: 68f8 ldr r0, [r7, #12] + 800543c: 4798 blx r3 + 800543e: e001 b.n 8005444 + } + else + { + /* should never be in this condition */ + return USBD_FAIL; + 8005440: 2302 movs r3, #2 + 8005442: e000 b.n 8005446 + } + + return USBD_OK; + 8005444: 2300 movs r3, #0 +} + 8005446: 4618 mov r0, r3 + 8005448: 3718 adds r7, #24 + 800544a: 46bd mov sp, r7 + 800544c: bd80 pop {r7, pc} + +0800544e : +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, + uint8_t epnum, uint8_t *pdata) +{ + 800544e: b580 push {r7, lr} + 8005450: b086 sub sp, #24 + 8005452: af00 add r7, sp, #0 + 8005454: 60f8 str r0, [r7, #12] + 8005456: 460b mov r3, r1 + 8005458: 607a str r2, [r7, #4] + 800545a: 72fb strb r3, [r7, #11] + USBD_EndpointTypeDef *pep; + + if (epnum == 0U) + 800545c: 7afb ldrb r3, [r7, #11] + 800545e: 2b00 cmp r3, #0 + 8005460: d17f bne.n 8005562 + { + pep = &pdev->ep_in[0]; + 8005462: 68fb ldr r3, [r7, #12] + 8005464: 3314 adds r3, #20 + 8005466: 617b str r3, [r7, #20] + + if (pdev->ep0_state == USBD_EP0_DATA_IN) + 8005468: 68fb ldr r3, [r7, #12] + 800546a: f8d3 3294 ldr.w r3, [r3, #660] ; 0x294 + 800546e: 2b02 cmp r3, #2 + 8005470: d15c bne.n 800552c + { + if (pep->rem_length > pep->maxpacket) + 8005472: 697b ldr r3, [r7, #20] + 8005474: 68da ldr r2, [r3, #12] + 8005476: 697b ldr r3, [r7, #20] + 8005478: 691b ldr r3, [r3, #16] + 800547a: 429a cmp r2, r3 + 800547c: d915 bls.n 80054aa + { + pep->rem_length -= pep->maxpacket; + 800547e: 697b ldr r3, [r7, #20] + 8005480: 68da ldr r2, [r3, #12] + 8005482: 697b ldr r3, [r7, #20] + 8005484: 691b ldr r3, [r3, #16] + 8005486: 1ad2 subs r2, r2, r3 + 8005488: 697b ldr r3, [r7, #20] + 800548a: 60da str r2, [r3, #12] + + USBD_CtlContinueSendData(pdev, pdata, (uint16_t)pep->rem_length); + 800548c: 697b ldr r3, [r7, #20] + 800548e: 68db ldr r3, [r3, #12] + 8005490: b29b uxth r3, r3 + 8005492: 461a mov r2, r3 + 8005494: 6879 ldr r1, [r7, #4] + 8005496: 68f8 ldr r0, [r7, #12] + 8005498: f000 feb6 bl 8006208 + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + 800549c: 2300 movs r3, #0 + 800549e: 2200 movs r2, #0 + 80054a0: 2100 movs r1, #0 + 80054a2: 68f8 ldr r0, [r7, #12] + 80054a4: f001 fb3a bl 8006b1c + 80054a8: e04e b.n 8005548 + } + else + { + /* last packet is MPS multiple, so send ZLP packet */ + if ((pep->total_length % pep->maxpacket == 0U) && + 80054aa: 697b ldr r3, [r7, #20] + 80054ac: 689b ldr r3, [r3, #8] + 80054ae: 697a ldr r2, [r7, #20] + 80054b0: 6912 ldr r2, [r2, #16] + 80054b2: fbb3 f1f2 udiv r1, r3, r2 + 80054b6: fb02 f201 mul.w r2, r2, r1 + 80054ba: 1a9b subs r3, r3, r2 + 80054bc: 2b00 cmp r3, #0 + 80054be: d11c bne.n 80054fa + (pep->total_length >= pep->maxpacket) && + 80054c0: 697b ldr r3, [r7, #20] + 80054c2: 689a ldr r2, [r3, #8] + 80054c4: 697b ldr r3, [r7, #20] + 80054c6: 691b ldr r3, [r3, #16] + if ((pep->total_length % pep->maxpacket == 0U) && + 80054c8: 429a cmp r2, r3 + 80054ca: d316 bcc.n 80054fa + (pep->total_length < pdev->ep0_data_len)) + 80054cc: 697b ldr r3, [r7, #20] + 80054ce: 689a ldr r2, [r3, #8] + 80054d0: 68fb ldr r3, [r7, #12] + 80054d2: f8d3 3298 ldr.w r3, [r3, #664] ; 0x298 + (pep->total_length >= pep->maxpacket) && + 80054d6: 429a cmp r2, r3 + 80054d8: d20f bcs.n 80054fa + { + USBD_CtlContinueSendData(pdev, NULL, 0U); + 80054da: 2200 movs r2, #0 + 80054dc: 2100 movs r1, #0 + 80054de: 68f8 ldr r0, [r7, #12] + 80054e0: f000 fe92 bl 8006208 + pdev->ep0_data_len = 0U; + 80054e4: 68fb ldr r3, [r7, #12] + 80054e6: 2200 movs r2, #0 + 80054e8: f8c3 2298 str.w r2, [r3, #664] ; 0x298 + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + 80054ec: 2300 movs r3, #0 + 80054ee: 2200 movs r2, #0 + 80054f0: 2100 movs r1, #0 + 80054f2: 68f8 ldr r0, [r7, #12] + 80054f4: f001 fb12 bl 8006b1c + 80054f8: e026 b.n 8005548 + } + else + { + if ((pdev->pClass->EP0_TxSent != NULL) && + 80054fa: 68fb ldr r3, [r7, #12] + 80054fc: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005500: 68db ldr r3, [r3, #12] + 8005502: 2b00 cmp r3, #0 + 8005504: d00a beq.n 800551c + (pdev->dev_state == USBD_STATE_CONFIGURED)) + 8005506: 68fb ldr r3, [r7, #12] + 8005508: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + if ((pdev->pClass->EP0_TxSent != NULL) && + 800550c: 2b03 cmp r3, #3 + 800550e: d105 bne.n 800551c + { + pdev->pClass->EP0_TxSent(pdev); + 8005510: 68fb ldr r3, [r7, #12] + 8005512: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005516: 68db ldr r3, [r3, #12] + 8005518: 68f8 ldr r0, [r7, #12] + 800551a: 4798 blx r3 + } + USBD_LL_StallEP(pdev, 0x80U); + 800551c: 2180 movs r1, #128 ; 0x80 + 800551e: 68f8 ldr r0, [r7, #12] + 8005520: f001 fa50 bl 80069c4 + USBD_CtlReceiveStatus(pdev); + 8005524: 68f8 ldr r0, [r7, #12] + 8005526: f000 fec4 bl 80062b2 + 800552a: e00d b.n 8005548 + } + } + } + else + { + if ((pdev->ep0_state == USBD_EP0_STATUS_IN) || + 800552c: 68fb ldr r3, [r7, #12] + 800552e: f8d3 3294 ldr.w r3, [r3, #660] ; 0x294 + 8005532: 2b04 cmp r3, #4 + 8005534: d004 beq.n 8005540 + (pdev->ep0_state == USBD_EP0_IDLE)) + 8005536: 68fb ldr r3, [r7, #12] + 8005538: f8d3 3294 ldr.w r3, [r3, #660] ; 0x294 + if ((pdev->ep0_state == USBD_EP0_STATUS_IN) || + 800553c: 2b00 cmp r3, #0 + 800553e: d103 bne.n 8005548 + { + USBD_LL_StallEP(pdev, 0x80U); + 8005540: 2180 movs r1, #128 ; 0x80 + 8005542: 68f8 ldr r0, [r7, #12] + 8005544: f001 fa3e bl 80069c4 + } + } + + if (pdev->dev_test_mode == 1U) + 8005548: 68fb ldr r3, [r7, #12] + 800554a: f893 32a0 ldrb.w r3, [r3, #672] ; 0x2a0 + 800554e: 2b01 cmp r3, #1 + 8005550: d11d bne.n 800558e + { + USBD_RunTestMode(pdev); + 8005552: 68f8 ldr r0, [r7, #12] + 8005554: f7ff fe83 bl 800525e + pdev->dev_test_mode = 0U; + 8005558: 68fb ldr r3, [r7, #12] + 800555a: 2200 movs r2, #0 + 800555c: f883 22a0 strb.w r2, [r3, #672] ; 0x2a0 + 8005560: e015 b.n 800558e + } + } + else if ((pdev->pClass->DataIn != NULL) && + 8005562: 68fb ldr r3, [r7, #12] + 8005564: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005568: 695b ldr r3, [r3, #20] + 800556a: 2b00 cmp r3, #0 + 800556c: d00d beq.n 800558a + (pdev->dev_state == USBD_STATE_CONFIGURED)) + 800556e: 68fb ldr r3, [r7, #12] + 8005570: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + else if ((pdev->pClass->DataIn != NULL) && + 8005574: 2b03 cmp r3, #3 + 8005576: d108 bne.n 800558a + { + pdev->pClass->DataIn(pdev, epnum); + 8005578: 68fb ldr r3, [r7, #12] + 800557a: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 800557e: 695b ldr r3, [r3, #20] + 8005580: 7afa ldrb r2, [r7, #11] + 8005582: 4611 mov r1, r2 + 8005584: 68f8 ldr r0, [r7, #12] + 8005586: 4798 blx r3 + 8005588: e001 b.n 800558e + } + else + { + /* should never be in this condition */ + return USBD_FAIL; + 800558a: 2302 movs r3, #2 + 800558c: e000 b.n 8005590 + } + + return USBD_OK; + 800558e: 2300 movs r3, #0 +} + 8005590: 4618 mov r0, r3 + 8005592: 3718 adds r7, #24 + 8005594: 46bd mov sp, r7 + 8005596: bd80 pop {r7, pc} + +08005598 : +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev) +{ + 8005598: b580 push {r7, lr} + 800559a: b082 sub sp, #8 + 800559c: af00 add r7, sp, #0 + 800559e: 6078 str r0, [r7, #4] + /* Open EP0 OUT */ + USBD_LL_OpenEP(pdev, 0x00U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE); + 80055a0: 2340 movs r3, #64 ; 0x40 + 80055a2: 2200 movs r2, #0 + 80055a4: 2100 movs r1, #0 + 80055a6: 6878 ldr r0, [r7, #4] + 80055a8: f001 f9c7 bl 800693a + pdev->ep_out[0x00U & 0xFU].is_used = 1U; + 80055ac: 687b ldr r3, [r7, #4] + 80055ae: 2201 movs r2, #1 + 80055b0: f8c3 2158 str.w r2, [r3, #344] ; 0x158 + + pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE; + 80055b4: 687b ldr r3, [r7, #4] + 80055b6: 2240 movs r2, #64 ; 0x40 + 80055b8: f8c3 2164 str.w r2, [r3, #356] ; 0x164 + + /* Open EP0 IN */ + USBD_LL_OpenEP(pdev, 0x80U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE); + 80055bc: 2340 movs r3, #64 ; 0x40 + 80055be: 2200 movs r2, #0 + 80055c0: 2180 movs r1, #128 ; 0x80 + 80055c2: 6878 ldr r0, [r7, #4] + 80055c4: f001 f9b9 bl 800693a + pdev->ep_in[0x80U & 0xFU].is_used = 1U; + 80055c8: 687b ldr r3, [r7, #4] + 80055ca: 2201 movs r2, #1 + 80055cc: 619a str r2, [r3, #24] + + pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE; + 80055ce: 687b ldr r3, [r7, #4] + 80055d0: 2240 movs r2, #64 ; 0x40 + 80055d2: 625a str r2, [r3, #36] ; 0x24 + + /* Upon Reset call user call back */ + pdev->dev_state = USBD_STATE_DEFAULT; + 80055d4: 687b ldr r3, [r7, #4] + 80055d6: 2201 movs r2, #1 + 80055d8: f883 229c strb.w r2, [r3, #668] ; 0x29c + pdev->ep0_state = USBD_EP0_IDLE; + 80055dc: 687b ldr r3, [r7, #4] + 80055de: 2200 movs r2, #0 + 80055e0: f8c3 2294 str.w r2, [r3, #660] ; 0x294 + pdev->dev_config = 0U; + 80055e4: 687b ldr r3, [r7, #4] + 80055e6: 2200 movs r2, #0 + 80055e8: 605a str r2, [r3, #4] + pdev->dev_remote_wakeup = 0U; + 80055ea: 687b ldr r3, [r7, #4] + 80055ec: 2200 movs r2, #0 + 80055ee: f8c3 22a4 str.w r2, [r3, #676] ; 0x2a4 + + if (pdev->pClassData) + 80055f2: 687b ldr r3, [r7, #4] + 80055f4: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 80055f8: 2b00 cmp r3, #0 + 80055fa: d009 beq.n 8005610 + { + pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config); + 80055fc: 687b ldr r3, [r7, #4] + 80055fe: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005602: 685b ldr r3, [r3, #4] + 8005604: 687a ldr r2, [r7, #4] + 8005606: 6852 ldr r2, [r2, #4] + 8005608: b2d2 uxtb r2, r2 + 800560a: 4611 mov r1, r2 + 800560c: 6878 ldr r0, [r7, #4] + 800560e: 4798 blx r3 + } + + return USBD_OK; + 8005610: 2300 movs r3, #0 +} + 8005612: 4618 mov r0, r3 + 8005614: 3708 adds r7, #8 + 8005616: 46bd mov sp, r7 + 8005618: bd80 pop {r7, pc} + +0800561a : +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, + USBD_SpeedTypeDef speed) +{ + 800561a: b480 push {r7} + 800561c: b083 sub sp, #12 + 800561e: af00 add r7, sp, #0 + 8005620: 6078 str r0, [r7, #4] + 8005622: 460b mov r3, r1 + 8005624: 70fb strb r3, [r7, #3] + pdev->dev_speed = speed; + 8005626: 687b ldr r3, [r7, #4] + 8005628: 78fa ldrb r2, [r7, #3] + 800562a: 741a strb r2, [r3, #16] + + return USBD_OK; + 800562c: 2300 movs r3, #0 +} + 800562e: 4618 mov r0, r3 + 8005630: 370c adds r7, #12 + 8005632: 46bd mov sp, r7 + 8005634: bc80 pop {r7} + 8005636: 4770 bx lr + +08005638 : +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev) +{ + 8005638: b480 push {r7} + 800563a: b083 sub sp, #12 + 800563c: af00 add r7, sp, #0 + 800563e: 6078 str r0, [r7, #4] + pdev->dev_old_state = pdev->dev_state; + 8005640: 687b ldr r3, [r7, #4] + 8005642: f893 229c ldrb.w r2, [r3, #668] ; 0x29c + 8005646: 687b ldr r3, [r7, #4] + 8005648: f883 229d strb.w r2, [r3, #669] ; 0x29d + pdev->dev_state = USBD_STATE_SUSPENDED; + 800564c: 687b ldr r3, [r7, #4] + 800564e: 2204 movs r2, #4 + 8005650: f883 229c strb.w r2, [r3, #668] ; 0x29c + + return USBD_OK; + 8005654: 2300 movs r3, #0 +} + 8005656: 4618 mov r0, r3 + 8005658: 370c adds r7, #12 + 800565a: 46bd mov sp, r7 + 800565c: bc80 pop {r7} + 800565e: 4770 bx lr + +08005660 : +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev) +{ + 8005660: b480 push {r7} + 8005662: b083 sub sp, #12 + 8005664: af00 add r7, sp, #0 + 8005666: 6078 str r0, [r7, #4] + if (pdev->dev_state == USBD_STATE_SUSPENDED) + 8005668: 687b ldr r3, [r7, #4] + 800566a: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 800566e: 2b04 cmp r3, #4 + 8005670: d105 bne.n 800567e + { + pdev->dev_state = pdev->dev_old_state; + 8005672: 687b ldr r3, [r7, #4] + 8005674: f893 229d ldrb.w r2, [r3, #669] ; 0x29d + 8005678: 687b ldr r3, [r7, #4] + 800567a: f883 229c strb.w r2, [r3, #668] ; 0x29c + } + + return USBD_OK; + 800567e: 2300 movs r3, #0 +} + 8005680: 4618 mov r0, r3 + 8005682: 370c adds r7, #12 + 8005684: 46bd mov sp, r7 + 8005686: bc80 pop {r7} + 8005688: 4770 bx lr + +0800568a : +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev) +{ + 800568a: b580 push {r7, lr} + 800568c: b082 sub sp, #8 + 800568e: af00 add r7, sp, #0 + 8005690: 6078 str r0, [r7, #4] + if (pdev->dev_state == USBD_STATE_CONFIGURED) + 8005692: 687b ldr r3, [r7, #4] + 8005694: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005698: 2b03 cmp r3, #3 + 800569a: d10b bne.n 80056b4 + { + if (pdev->pClass->SOF != NULL) + 800569c: 687b ldr r3, [r7, #4] + 800569e: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80056a2: 69db ldr r3, [r3, #28] + 80056a4: 2b00 cmp r3, #0 + 80056a6: d005 beq.n 80056b4 + { + pdev->pClass->SOF(pdev); + 80056a8: 687b ldr r3, [r7, #4] + 80056aa: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80056ae: 69db ldr r3, [r3, #28] + 80056b0: 6878 ldr r0, [r7, #4] + 80056b2: 4798 blx r3 + } + } + + return USBD_OK; + 80056b4: 2300 movs r3, #0 +} + 80056b6: 4618 mov r0, r3 + 80056b8: 3708 adds r7, #8 + 80056ba: 46bd mov sp, r7 + 80056bc: bd80 pop {r7, pc} + ... + +080056c0 : +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 80056c0: b580 push {r7, lr} + 80056c2: b084 sub sp, #16 + 80056c4: af00 add r7, sp, #0 + 80056c6: 6078 str r0, [r7, #4] + 80056c8: 6039 str r1, [r7, #0] + USBD_StatusTypeDef ret = USBD_OK; + 80056ca: 2300 movs r3, #0 + 80056cc: 73fb strb r3, [r7, #15] + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + 80056ce: 683b ldr r3, [r7, #0] + 80056d0: 781b ldrb r3, [r3, #0] + 80056d2: f003 0360 and.w r3, r3, #96 ; 0x60 + 80056d6: 2b20 cmp r3, #32 + 80056d8: d004 beq.n 80056e4 + 80056da: 2b40 cmp r3, #64 ; 0x40 + 80056dc: d002 beq.n 80056e4 + 80056de: 2b00 cmp r3, #0 + 80056e0: d008 beq.n 80056f4 + 80056e2: e04c b.n 800577e + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + pdev->pClass->Setup(pdev, req); + 80056e4: 687b ldr r3, [r7, #4] + 80056e6: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80056ea: 689b ldr r3, [r3, #8] + 80056ec: 6839 ldr r1, [r7, #0] + 80056ee: 6878 ldr r0, [r7, #4] + 80056f0: 4798 blx r3 + break; + 80056f2: e049 b.n 8005788 + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + 80056f4: 683b ldr r3, [r7, #0] + 80056f6: 785b ldrb r3, [r3, #1] + 80056f8: 2b09 cmp r3, #9 + 80056fa: d83a bhi.n 8005772 + 80056fc: a201 add r2, pc, #4 ; (adr r2, 8005704 ) + 80056fe: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8005702: bf00 nop + 8005704: 08005755 .word 0x08005755 + 8005708: 08005769 .word 0x08005769 + 800570c: 08005773 .word 0x08005773 + 8005710: 0800575f .word 0x0800575f + 8005714: 08005773 .word 0x08005773 + 8005718: 08005737 .word 0x08005737 + 800571c: 0800572d .word 0x0800572d + 8005720: 08005773 .word 0x08005773 + 8005724: 0800574b .word 0x0800574b + 8005728: 08005741 .word 0x08005741 + { + case USB_REQ_GET_DESCRIPTOR: + USBD_GetDescriptor(pdev, req); + 800572c: 6839 ldr r1, [r7, #0] + 800572e: 6878 ldr r0, [r7, #4] + 8005730: f000 f9d4 bl 8005adc + break; + 8005734: e022 b.n 800577c + + case USB_REQ_SET_ADDRESS: + USBD_SetAddress(pdev, req); + 8005736: 6839 ldr r1, [r7, #0] + 8005738: 6878 ldr r0, [r7, #4] + 800573a: f000 fb37 bl 8005dac + break; + 800573e: e01d b.n 800577c + + case USB_REQ_SET_CONFIGURATION: + USBD_SetConfig(pdev, req); + 8005740: 6839 ldr r1, [r7, #0] + 8005742: 6878 ldr r0, [r7, #4] + 8005744: f000 fb74 bl 8005e30 + break; + 8005748: e018 b.n 800577c + + case USB_REQ_GET_CONFIGURATION: + USBD_GetConfig(pdev, req); + 800574a: 6839 ldr r1, [r7, #0] + 800574c: 6878 ldr r0, [r7, #4] + 800574e: f000 fbfd bl 8005f4c + break; + 8005752: e013 b.n 800577c + + case USB_REQ_GET_STATUS: + USBD_GetStatus(pdev, req); + 8005754: 6839 ldr r1, [r7, #0] + 8005756: 6878 ldr r0, [r7, #4] + 8005758: f000 fc2c bl 8005fb4 + break; + 800575c: e00e b.n 800577c + + case USB_REQ_SET_FEATURE: + USBD_SetFeature(pdev, req); + 800575e: 6839 ldr r1, [r7, #0] + 8005760: 6878 ldr r0, [r7, #4] + 8005762: f000 fc5a bl 800601a + break; + 8005766: e009 b.n 800577c + + case USB_REQ_CLEAR_FEATURE: + USBD_ClrFeature(pdev, req); + 8005768: 6839 ldr r1, [r7, #0] + 800576a: 6878 ldr r0, [r7, #4] + 800576c: f000 fc69 bl 8006042 + break; + 8005770: e004 b.n 800577c + + default: + USBD_CtlError(pdev, req); + 8005772: 6839 ldr r1, [r7, #0] + 8005774: 6878 ldr r0, [r7, #4] + 8005776: f000 fcc1 bl 80060fc + break; + 800577a: bf00 nop + } + break; + 800577c: e004 b.n 8005788 + + default: + USBD_CtlError(pdev, req); + 800577e: 6839 ldr r1, [r7, #0] + 8005780: 6878 ldr r0, [r7, #4] + 8005782: f000 fcbb bl 80060fc + break; + 8005786: bf00 nop + } + + return ret; + 8005788: 7bfb ldrb r3, [r7, #15] +} + 800578a: 4618 mov r0, r3 + 800578c: 3710 adds r7, #16 + 800578e: 46bd mov sp, r7 + 8005790: bd80 pop {r7, pc} + 8005792: bf00 nop + +08005794 : +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 8005794: b580 push {r7, lr} + 8005796: b084 sub sp, #16 + 8005798: af00 add r7, sp, #0 + 800579a: 6078 str r0, [r7, #4] + 800579c: 6039 str r1, [r7, #0] + USBD_StatusTypeDef ret = USBD_OK; + 800579e: 2300 movs r3, #0 + 80057a0: 73fb strb r3, [r7, #15] + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + 80057a2: 683b ldr r3, [r7, #0] + 80057a4: 781b ldrb r3, [r3, #0] + 80057a6: f003 0360 and.w r3, r3, #96 ; 0x60 + 80057aa: 2b20 cmp r3, #32 + 80057ac: d003 beq.n 80057b6 + 80057ae: 2b40 cmp r3, #64 ; 0x40 + 80057b0: d001 beq.n 80057b6 + 80057b2: 2b00 cmp r3, #0 + 80057b4: d12a bne.n 800580c + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + case USB_REQ_TYPE_STANDARD: + switch (pdev->dev_state) + 80057b6: 687b ldr r3, [r7, #4] + 80057b8: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 80057bc: 3b01 subs r3, #1 + 80057be: 2b02 cmp r3, #2 + 80057c0: d81d bhi.n 80057fe + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + + if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) + 80057c2: 683b ldr r3, [r7, #0] + 80057c4: 889b ldrh r3, [r3, #4] + 80057c6: b2db uxtb r3, r3 + 80057c8: 2b01 cmp r3, #1 + 80057ca: d813 bhi.n 80057f4 + { + ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req); + 80057cc: 687b ldr r3, [r7, #4] + 80057ce: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 80057d2: 689b ldr r3, [r3, #8] + 80057d4: 6839 ldr r1, [r7, #0] + 80057d6: 6878 ldr r0, [r7, #4] + 80057d8: 4798 blx r3 + 80057da: 4603 mov r3, r0 + 80057dc: 73fb strb r3, [r7, #15] + + if ((req->wLength == 0U) && (ret == USBD_OK)) + 80057de: 683b ldr r3, [r7, #0] + 80057e0: 88db ldrh r3, [r3, #6] + 80057e2: 2b00 cmp r3, #0 + 80057e4: d110 bne.n 8005808 + 80057e6: 7bfb ldrb r3, [r7, #15] + 80057e8: 2b00 cmp r3, #0 + 80057ea: d10d bne.n 8005808 + { + USBD_CtlSendStatus(pdev); + 80057ec: 6878 ldr r0, [r7, #4] + 80057ee: f000 fd4d bl 800628c + } + else + { + USBD_CtlError(pdev, req); + } + break; + 80057f2: e009 b.n 8005808 + USBD_CtlError(pdev, req); + 80057f4: 6839 ldr r1, [r7, #0] + 80057f6: 6878 ldr r0, [r7, #4] + 80057f8: f000 fc80 bl 80060fc + break; + 80057fc: e004 b.n 8005808 + + default: + USBD_CtlError(pdev, req); + 80057fe: 6839 ldr r1, [r7, #0] + 8005800: 6878 ldr r0, [r7, #4] + 8005802: f000 fc7b bl 80060fc + break; + 8005806: e000 b.n 800580a + break; + 8005808: bf00 nop + } + break; + 800580a: e004 b.n 8005816 + + default: + USBD_CtlError(pdev, req); + 800580c: 6839 ldr r1, [r7, #0] + 800580e: 6878 ldr r0, [r7, #4] + 8005810: f000 fc74 bl 80060fc + break; + 8005814: bf00 nop + } + + return USBD_OK; + 8005816: 2300 movs r3, #0 +} + 8005818: 4618 mov r0, r3 + 800581a: 3710 adds r7, #16 + 800581c: 46bd mov sp, r7 + 800581e: bd80 pop {r7, pc} + +08005820 : +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 8005820: b580 push {r7, lr} + 8005822: b084 sub sp, #16 + 8005824: af00 add r7, sp, #0 + 8005826: 6078 str r0, [r7, #4] + 8005828: 6039 str r1, [r7, #0] + USBD_EndpointTypeDef *pep; + uint8_t ep_addr; + USBD_StatusTypeDef ret = USBD_OK; + 800582a: 2300 movs r3, #0 + 800582c: 73fb strb r3, [r7, #15] + ep_addr = LOBYTE(req->wIndex); + 800582e: 683b ldr r3, [r7, #0] + 8005830: 889b ldrh r3, [r3, #4] + 8005832: 73bb strb r3, [r7, #14] + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + 8005834: 683b ldr r3, [r7, #0] + 8005836: 781b ldrb r3, [r3, #0] + 8005838: f003 0360 and.w r3, r3, #96 ; 0x60 + 800583c: 2b20 cmp r3, #32 + 800583e: d004 beq.n 800584a + 8005840: 2b40 cmp r3, #64 ; 0x40 + 8005842: d002 beq.n 800584a + 8005844: 2b00 cmp r3, #0 + 8005846: d008 beq.n 800585a + 8005848: e13d b.n 8005ac6 + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + pdev->pClass->Setup(pdev, req); + 800584a: 687b ldr r3, [r7, #4] + 800584c: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005850: 689b ldr r3, [r3, #8] + 8005852: 6839 ldr r1, [r7, #0] + 8005854: 6878 ldr r0, [r7, #4] + 8005856: 4798 blx r3 + break; + 8005858: e13a b.n 8005ad0 + + case USB_REQ_TYPE_STANDARD: + /* Check if it is a class request */ + if ((req->bmRequest & 0x60U) == 0x20U) + 800585a: 683b ldr r3, [r7, #0] + 800585c: 781b ldrb r3, [r3, #0] + 800585e: f003 0360 and.w r3, r3, #96 ; 0x60 + 8005862: 2b20 cmp r3, #32 + 8005864: d10a bne.n 800587c + { + ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req); + 8005866: 687b ldr r3, [r7, #4] + 8005868: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 800586c: 689b ldr r3, [r3, #8] + 800586e: 6839 ldr r1, [r7, #0] + 8005870: 6878 ldr r0, [r7, #4] + 8005872: 4798 blx r3 + 8005874: 4603 mov r3, r0 + 8005876: 73fb strb r3, [r7, #15] + + return ret; + 8005878: 7bfb ldrb r3, [r7, #15] + 800587a: e12a b.n 8005ad2 + } + + switch (req->bRequest) + 800587c: 683b ldr r3, [r7, #0] + 800587e: 785b ldrb r3, [r3, #1] + 8005880: 2b01 cmp r3, #1 + 8005882: d03e beq.n 8005902 + 8005884: 2b03 cmp r3, #3 + 8005886: d002 beq.n 800588e + 8005888: 2b00 cmp r3, #0 + 800588a: d070 beq.n 800596e + 800588c: e115 b.n 8005aba + { + case USB_REQ_SET_FEATURE: + switch (pdev->dev_state) + 800588e: 687b ldr r3, [r7, #4] + 8005890: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005894: 2b02 cmp r3, #2 + 8005896: d002 beq.n 800589e + 8005898: 2b03 cmp r3, #3 + 800589a: d015 beq.n 80058c8 + 800589c: e02b b.n 80058f6 + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + 800589e: 7bbb ldrb r3, [r7, #14] + 80058a0: 2b00 cmp r3, #0 + 80058a2: d00c beq.n 80058be + 80058a4: 7bbb ldrb r3, [r7, #14] + 80058a6: 2b80 cmp r3, #128 ; 0x80 + 80058a8: d009 beq.n 80058be + { + USBD_LL_StallEP(pdev, ep_addr); + 80058aa: 7bbb ldrb r3, [r7, #14] + 80058ac: 4619 mov r1, r3 + 80058ae: 6878 ldr r0, [r7, #4] + 80058b0: f001 f888 bl 80069c4 + USBD_LL_StallEP(pdev, 0x80U); + 80058b4: 2180 movs r1, #128 ; 0x80 + 80058b6: 6878 ldr r0, [r7, #4] + 80058b8: f001 f884 bl 80069c4 + } + else + { + USBD_CtlError(pdev, req); + } + break; + 80058bc: e020 b.n 8005900 + USBD_CtlError(pdev, req); + 80058be: 6839 ldr r1, [r7, #0] + 80058c0: 6878 ldr r0, [r7, #4] + 80058c2: f000 fc1b bl 80060fc + break; + 80058c6: e01b b.n 8005900 + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + 80058c8: 683b ldr r3, [r7, #0] + 80058ca: 885b ldrh r3, [r3, #2] + 80058cc: 2b00 cmp r3, #0 + 80058ce: d10e bne.n 80058ee + { + if ((ep_addr != 0x00U) && + 80058d0: 7bbb ldrb r3, [r7, #14] + 80058d2: 2b00 cmp r3, #0 + 80058d4: d00b beq.n 80058ee + 80058d6: 7bbb ldrb r3, [r7, #14] + 80058d8: 2b80 cmp r3, #128 ; 0x80 + 80058da: d008 beq.n 80058ee + (ep_addr != 0x80U) && (req->wLength == 0x00U)) + 80058dc: 683b ldr r3, [r7, #0] + 80058de: 88db ldrh r3, [r3, #6] + 80058e0: 2b00 cmp r3, #0 + 80058e2: d104 bne.n 80058ee + { + USBD_LL_StallEP(pdev, ep_addr); + 80058e4: 7bbb ldrb r3, [r7, #14] + 80058e6: 4619 mov r1, r3 + 80058e8: 6878 ldr r0, [r7, #4] + 80058ea: f001 f86b bl 80069c4 + } + } + USBD_CtlSendStatus(pdev); + 80058ee: 6878 ldr r0, [r7, #4] + 80058f0: f000 fccc bl 800628c + + break; + 80058f4: e004 b.n 8005900 + + default: + USBD_CtlError(pdev, req); + 80058f6: 6839 ldr r1, [r7, #0] + 80058f8: 6878 ldr r0, [r7, #4] + 80058fa: f000 fbff bl 80060fc + break; + 80058fe: bf00 nop + } + break; + 8005900: e0e0 b.n 8005ac4 + + case USB_REQ_CLEAR_FEATURE: + + switch (pdev->dev_state) + 8005902: 687b ldr r3, [r7, #4] + 8005904: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005908: 2b02 cmp r3, #2 + 800590a: d002 beq.n 8005912 + 800590c: 2b03 cmp r3, #3 + 800590e: d015 beq.n 800593c + 8005910: e026 b.n 8005960 + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + 8005912: 7bbb ldrb r3, [r7, #14] + 8005914: 2b00 cmp r3, #0 + 8005916: d00c beq.n 8005932 + 8005918: 7bbb ldrb r3, [r7, #14] + 800591a: 2b80 cmp r3, #128 ; 0x80 + 800591c: d009 beq.n 8005932 + { + USBD_LL_StallEP(pdev, ep_addr); + 800591e: 7bbb ldrb r3, [r7, #14] + 8005920: 4619 mov r1, r3 + 8005922: 6878 ldr r0, [r7, #4] + 8005924: f001 f84e bl 80069c4 + USBD_LL_StallEP(pdev, 0x80U); + 8005928: 2180 movs r1, #128 ; 0x80 + 800592a: 6878 ldr r0, [r7, #4] + 800592c: f001 f84a bl 80069c4 + } + else + { + USBD_CtlError(pdev, req); + } + break; + 8005930: e01c b.n 800596c + USBD_CtlError(pdev, req); + 8005932: 6839 ldr r1, [r7, #0] + 8005934: 6878 ldr r0, [r7, #4] + 8005936: f000 fbe1 bl 80060fc + break; + 800593a: e017 b.n 800596c + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + 800593c: 683b ldr r3, [r7, #0] + 800593e: 885b ldrh r3, [r3, #2] + 8005940: 2b00 cmp r3, #0 + 8005942: d112 bne.n 800596a + { + if ((ep_addr & 0x7FU) != 0x00U) + 8005944: 7bbb ldrb r3, [r7, #14] + 8005946: f003 037f and.w r3, r3, #127 ; 0x7f + 800594a: 2b00 cmp r3, #0 + 800594c: d004 beq.n 8005958 + { + USBD_LL_ClearStallEP(pdev, ep_addr); + 800594e: 7bbb ldrb r3, [r7, #14] + 8005950: 4619 mov r1, r3 + 8005952: 6878 ldr r0, [r7, #4] + 8005954: f001 f855 bl 8006a02 + } + USBD_CtlSendStatus(pdev); + 8005958: 6878 ldr r0, [r7, #4] + 800595a: f000 fc97 bl 800628c + } + break; + 800595e: e004 b.n 800596a + + default: + USBD_CtlError(pdev, req); + 8005960: 6839 ldr r1, [r7, #0] + 8005962: 6878 ldr r0, [r7, #4] + 8005964: f000 fbca bl 80060fc + break; + 8005968: e000 b.n 800596c + break; + 800596a: bf00 nop + } + break; + 800596c: e0aa b.n 8005ac4 + + case USB_REQ_GET_STATUS: + switch (pdev->dev_state) + 800596e: 687b ldr r3, [r7, #4] + 8005970: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005974: 2b02 cmp r3, #2 + 8005976: d002 beq.n 800597e + 8005978: 2b03 cmp r3, #3 + 800597a: d032 beq.n 80059e2 + 800597c: e097 b.n 8005aae + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + 800597e: 7bbb ldrb r3, [r7, #14] + 8005980: 2b00 cmp r3, #0 + 8005982: d007 beq.n 8005994 + 8005984: 7bbb ldrb r3, [r7, #14] + 8005986: 2b80 cmp r3, #128 ; 0x80 + 8005988: d004 beq.n 8005994 + { + USBD_CtlError(pdev, req); + 800598a: 6839 ldr r1, [r7, #0] + 800598c: 6878 ldr r0, [r7, #4] + 800598e: f000 fbb5 bl 80060fc + break; + 8005992: e091 b.n 8005ab8 + } + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + 8005994: f997 300e ldrsb.w r3, [r7, #14] + 8005998: 2b00 cmp r3, #0 + 800599a: da0b bge.n 80059b4 + 800599c: 7bbb ldrb r3, [r7, #14] + 800599e: f003 027f and.w r2, r3, #127 ; 0x7f + 80059a2: 4613 mov r3, r2 + 80059a4: 009b lsls r3, r3, #2 + 80059a6: 4413 add r3, r2 + 80059a8: 009b lsls r3, r3, #2 + 80059aa: 3310 adds r3, #16 + 80059ac: 687a ldr r2, [r7, #4] + 80059ae: 4413 add r3, r2 + 80059b0: 3304 adds r3, #4 + 80059b2: e00b b.n 80059cc + &pdev->ep_out[ep_addr & 0x7FU]; + 80059b4: 7bbb ldrb r3, [r7, #14] + 80059b6: f003 027f and.w r2, r3, #127 ; 0x7f + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + 80059ba: 4613 mov r3, r2 + 80059bc: 009b lsls r3, r3, #2 + 80059be: 4413 add r3, r2 + 80059c0: 009b lsls r3, r3, #2 + 80059c2: f503 73a8 add.w r3, r3, #336 ; 0x150 + 80059c6: 687a ldr r2, [r7, #4] + 80059c8: 4413 add r3, r2 + 80059ca: 3304 adds r3, #4 + 80059cc: 60bb str r3, [r7, #8] + + pep->status = 0x0000U; + 80059ce: 68bb ldr r3, [r7, #8] + 80059d0: 2200 movs r2, #0 + 80059d2: 601a str r2, [r3, #0] + + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U); + 80059d4: 68bb ldr r3, [r7, #8] + 80059d6: 2202 movs r2, #2 + 80059d8: 4619 mov r1, r3 + 80059da: 6878 ldr r0, [r7, #4] + 80059dc: f000 fbf8 bl 80061d0 + break; + 80059e0: e06a b.n 8005ab8 + + case USBD_STATE_CONFIGURED: + if ((ep_addr & 0x80U) == 0x80U) + 80059e2: f997 300e ldrsb.w r3, [r7, #14] + 80059e6: 2b00 cmp r3, #0 + 80059e8: da11 bge.n 8005a0e + { + if (pdev->ep_in[ep_addr & 0xFU].is_used == 0U) + 80059ea: 7bbb ldrb r3, [r7, #14] + 80059ec: f003 020f and.w r2, r3, #15 + 80059f0: 6879 ldr r1, [r7, #4] + 80059f2: 4613 mov r3, r2 + 80059f4: 009b lsls r3, r3, #2 + 80059f6: 4413 add r3, r2 + 80059f8: 009b lsls r3, r3, #2 + 80059fa: 440b add r3, r1 + 80059fc: 3318 adds r3, #24 + 80059fe: 681b ldr r3, [r3, #0] + 8005a00: 2b00 cmp r3, #0 + 8005a02: d117 bne.n 8005a34 + { + USBD_CtlError(pdev, req); + 8005a04: 6839 ldr r1, [r7, #0] + 8005a06: 6878 ldr r0, [r7, #4] + 8005a08: f000 fb78 bl 80060fc + break; + 8005a0c: e054 b.n 8005ab8 + } + } + else + { + if (pdev->ep_out[ep_addr & 0xFU].is_used == 0U) + 8005a0e: 7bbb ldrb r3, [r7, #14] + 8005a10: f003 020f and.w r2, r3, #15 + 8005a14: 6879 ldr r1, [r7, #4] + 8005a16: 4613 mov r3, r2 + 8005a18: 009b lsls r3, r3, #2 + 8005a1a: 4413 add r3, r2 + 8005a1c: 009b lsls r3, r3, #2 + 8005a1e: 440b add r3, r1 + 8005a20: f503 73ac add.w r3, r3, #344 ; 0x158 + 8005a24: 681b ldr r3, [r3, #0] + 8005a26: 2b00 cmp r3, #0 + 8005a28: d104 bne.n 8005a34 + { + USBD_CtlError(pdev, req); + 8005a2a: 6839 ldr r1, [r7, #0] + 8005a2c: 6878 ldr r0, [r7, #4] + 8005a2e: f000 fb65 bl 80060fc + break; + 8005a32: e041 b.n 8005ab8 + } + } + + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + 8005a34: f997 300e ldrsb.w r3, [r7, #14] + 8005a38: 2b00 cmp r3, #0 + 8005a3a: da0b bge.n 8005a54 + 8005a3c: 7bbb ldrb r3, [r7, #14] + 8005a3e: f003 027f and.w r2, r3, #127 ; 0x7f + 8005a42: 4613 mov r3, r2 + 8005a44: 009b lsls r3, r3, #2 + 8005a46: 4413 add r3, r2 + 8005a48: 009b lsls r3, r3, #2 + 8005a4a: 3310 adds r3, #16 + 8005a4c: 687a ldr r2, [r7, #4] + 8005a4e: 4413 add r3, r2 + 8005a50: 3304 adds r3, #4 + 8005a52: e00b b.n 8005a6c + &pdev->ep_out[ep_addr & 0x7FU]; + 8005a54: 7bbb ldrb r3, [r7, #14] + 8005a56: f003 027f and.w r2, r3, #127 ; 0x7f + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + 8005a5a: 4613 mov r3, r2 + 8005a5c: 009b lsls r3, r3, #2 + 8005a5e: 4413 add r3, r2 + 8005a60: 009b lsls r3, r3, #2 + 8005a62: f503 73a8 add.w r3, r3, #336 ; 0x150 + 8005a66: 687a ldr r2, [r7, #4] + 8005a68: 4413 add r3, r2 + 8005a6a: 3304 adds r3, #4 + 8005a6c: 60bb str r3, [r7, #8] + + if ((ep_addr == 0x00U) || (ep_addr == 0x80U)) + 8005a6e: 7bbb ldrb r3, [r7, #14] + 8005a70: 2b00 cmp r3, #0 + 8005a72: d002 beq.n 8005a7a + 8005a74: 7bbb ldrb r3, [r7, #14] + 8005a76: 2b80 cmp r3, #128 ; 0x80 + 8005a78: d103 bne.n 8005a82 + { + pep->status = 0x0000U; + 8005a7a: 68bb ldr r3, [r7, #8] + 8005a7c: 2200 movs r2, #0 + 8005a7e: 601a str r2, [r3, #0] + 8005a80: e00e b.n 8005aa0 + } + else if (USBD_LL_IsStallEP(pdev, ep_addr)) + 8005a82: 7bbb ldrb r3, [r7, #14] + 8005a84: 4619 mov r1, r3 + 8005a86: 6878 ldr r0, [r7, #4] + 8005a88: f000 ffda bl 8006a40 + 8005a8c: 4603 mov r3, r0 + 8005a8e: 2b00 cmp r3, #0 + 8005a90: d003 beq.n 8005a9a + { + pep->status = 0x0001U; + 8005a92: 68bb ldr r3, [r7, #8] + 8005a94: 2201 movs r2, #1 + 8005a96: 601a str r2, [r3, #0] + 8005a98: e002 b.n 8005aa0 + } + else + { + pep->status = 0x0000U; + 8005a9a: 68bb ldr r3, [r7, #8] + 8005a9c: 2200 movs r2, #0 + 8005a9e: 601a str r2, [r3, #0] + } + + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U); + 8005aa0: 68bb ldr r3, [r7, #8] + 8005aa2: 2202 movs r2, #2 + 8005aa4: 4619 mov r1, r3 + 8005aa6: 6878 ldr r0, [r7, #4] + 8005aa8: f000 fb92 bl 80061d0 + break; + 8005aac: e004 b.n 8005ab8 + + default: + USBD_CtlError(pdev, req); + 8005aae: 6839 ldr r1, [r7, #0] + 8005ab0: 6878 ldr r0, [r7, #4] + 8005ab2: f000 fb23 bl 80060fc + break; + 8005ab6: bf00 nop + } + break; + 8005ab8: e004 b.n 8005ac4 + + default: + USBD_CtlError(pdev, req); + 8005aba: 6839 ldr r1, [r7, #0] + 8005abc: 6878 ldr r0, [r7, #4] + 8005abe: f000 fb1d bl 80060fc + break; + 8005ac2: bf00 nop + } + break; + 8005ac4: e004 b.n 8005ad0 + + default: + USBD_CtlError(pdev, req); + 8005ac6: 6839 ldr r1, [r7, #0] + 8005ac8: 6878 ldr r0, [r7, #4] + 8005aca: f000 fb17 bl 80060fc + break; + 8005ace: bf00 nop + } + + return ret; + 8005ad0: 7bfb ldrb r3, [r7, #15] +} + 8005ad2: 4618 mov r0, r3 + 8005ad4: 3710 adds r7, #16 + 8005ad6: 46bd mov sp, r7 + 8005ad8: bd80 pop {r7, pc} + ... + +08005adc : +* @param req: usb request +* @retval status +*/ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 8005adc: b580 push {r7, lr} + 8005ade: b084 sub sp, #16 + 8005ae0: af00 add r7, sp, #0 + 8005ae2: 6078 str r0, [r7, #4] + 8005ae4: 6039 str r1, [r7, #0] + uint16_t len = 0U; + 8005ae6: 2300 movs r3, #0 + 8005ae8: 813b strh r3, [r7, #8] + uint8_t *pbuf = NULL; + 8005aea: 2300 movs r3, #0 + 8005aec: 60fb str r3, [r7, #12] + uint8_t err = 0U; + 8005aee: 2300 movs r3, #0 + 8005af0: 72fb strb r3, [r7, #11] + + switch (req->wValue >> 8) + 8005af2: 683b ldr r3, [r7, #0] + 8005af4: 885b ldrh r3, [r3, #2] + 8005af6: 0a1b lsrs r3, r3, #8 + 8005af8: b29b uxth r3, r3 + 8005afa: 3b01 subs r3, #1 + 8005afc: 2b06 cmp r3, #6 + 8005afe: f200 8128 bhi.w 8005d52 + 8005b02: a201 add r2, pc, #4 ; (adr r2, 8005b08 ) + 8005b04: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8005b08: 08005b25 .word 0x08005b25 + 8005b0c: 08005b3d .word 0x08005b3d + 8005b10: 08005b7d .word 0x08005b7d + 8005b14: 08005d53 .word 0x08005d53 + 8005b18: 08005d53 .word 0x08005d53 + 8005b1c: 08005cf3 .word 0x08005cf3 + 8005b20: 08005d1f .word 0x08005d1f + err++; + } + break; +#endif + case USB_DESC_TYPE_DEVICE: + pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len); + 8005b24: 687b ldr r3, [r7, #4] + 8005b26: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005b2a: 681b ldr r3, [r3, #0] + 8005b2c: 687a ldr r2, [r7, #4] + 8005b2e: 7c12 ldrb r2, [r2, #16] + 8005b30: f107 0108 add.w r1, r7, #8 + 8005b34: 4610 mov r0, r2 + 8005b36: 4798 blx r3 + 8005b38: 60f8 str r0, [r7, #12] + break; + 8005b3a: e112 b.n 8005d62 + + case USB_DESC_TYPE_CONFIGURATION: + if (pdev->dev_speed == USBD_SPEED_HIGH) + 8005b3c: 687b ldr r3, [r7, #4] + 8005b3e: 7c1b ldrb r3, [r3, #16] + 8005b40: 2b00 cmp r3, #0 + 8005b42: d10d bne.n 8005b60 + { + pbuf = pdev->pClass->GetHSConfigDescriptor(&len); + 8005b44: 687b ldr r3, [r7, #4] + 8005b46: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005b4a: 6a9b ldr r3, [r3, #40] ; 0x28 + 8005b4c: f107 0208 add.w r2, r7, #8 + 8005b50: 4610 mov r0, r2 + 8005b52: 4798 blx r3 + 8005b54: 60f8 str r0, [r7, #12] + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + 8005b56: 68fb ldr r3, [r7, #12] + 8005b58: 3301 adds r3, #1 + 8005b5a: 2202 movs r2, #2 + 8005b5c: 701a strb r2, [r3, #0] + else + { + pbuf = pdev->pClass->GetFSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + break; + 8005b5e: e100 b.n 8005d62 + pbuf = pdev->pClass->GetFSConfigDescriptor(&len); + 8005b60: 687b ldr r3, [r7, #4] + 8005b62: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005b66: 6adb ldr r3, [r3, #44] ; 0x2c + 8005b68: f107 0208 add.w r2, r7, #8 + 8005b6c: 4610 mov r0, r2 + 8005b6e: 4798 blx r3 + 8005b70: 60f8 str r0, [r7, #12] + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + 8005b72: 68fb ldr r3, [r7, #12] + 8005b74: 3301 adds r3, #1 + 8005b76: 2202 movs r2, #2 + 8005b78: 701a strb r2, [r3, #0] + break; + 8005b7a: e0f2 b.n 8005d62 + + case USB_DESC_TYPE_STRING: + switch ((uint8_t)(req->wValue)) + 8005b7c: 683b ldr r3, [r7, #0] + 8005b7e: 885b ldrh r3, [r3, #2] + 8005b80: b2db uxtb r3, r3 + 8005b82: 2b05 cmp r3, #5 + 8005b84: f200 80ac bhi.w 8005ce0 + 8005b88: a201 add r2, pc, #4 ; (adr r2, 8005b90 ) + 8005b8a: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8005b8e: bf00 nop + 8005b90: 08005ba9 .word 0x08005ba9 + 8005b94: 08005bdd .word 0x08005bdd + 8005b98: 08005c11 .word 0x08005c11 + 8005b9c: 08005c45 .word 0x08005c45 + 8005ba0: 08005c79 .word 0x08005c79 + 8005ba4: 08005cad .word 0x08005cad + { + case USBD_IDX_LANGID_STR: + if (pdev->pDesc->GetLangIDStrDescriptor != NULL) + 8005ba8: 687b ldr r3, [r7, #4] + 8005baa: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005bae: 685b ldr r3, [r3, #4] + 8005bb0: 2b00 cmp r3, #0 + 8005bb2: d00b beq.n 8005bcc + { + pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len); + 8005bb4: 687b ldr r3, [r7, #4] + 8005bb6: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005bba: 685b ldr r3, [r3, #4] + 8005bbc: 687a ldr r2, [r7, #4] + 8005bbe: 7c12 ldrb r2, [r2, #16] + 8005bc0: f107 0108 add.w r1, r7, #8 + 8005bc4: 4610 mov r0, r2 + 8005bc6: 4798 blx r3 + 8005bc8: 60f8 str r0, [r7, #12] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005bca: e091 b.n 8005cf0 + USBD_CtlError(pdev, req); + 8005bcc: 6839 ldr r1, [r7, #0] + 8005bce: 6878 ldr r0, [r7, #4] + 8005bd0: f000 fa94 bl 80060fc + err++; + 8005bd4: 7afb ldrb r3, [r7, #11] + 8005bd6: 3301 adds r3, #1 + 8005bd8: 72fb strb r3, [r7, #11] + break; + 8005bda: e089 b.n 8005cf0 + + case USBD_IDX_MFC_STR: + if (pdev->pDesc->GetManufacturerStrDescriptor != NULL) + 8005bdc: 687b ldr r3, [r7, #4] + 8005bde: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005be2: 689b ldr r3, [r3, #8] + 8005be4: 2b00 cmp r3, #0 + 8005be6: d00b beq.n 8005c00 + { + pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len); + 8005be8: 687b ldr r3, [r7, #4] + 8005bea: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005bee: 689b ldr r3, [r3, #8] + 8005bf0: 687a ldr r2, [r7, #4] + 8005bf2: 7c12 ldrb r2, [r2, #16] + 8005bf4: f107 0108 add.w r1, r7, #8 + 8005bf8: 4610 mov r0, r2 + 8005bfa: 4798 blx r3 + 8005bfc: 60f8 str r0, [r7, #12] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005bfe: e077 b.n 8005cf0 + USBD_CtlError(pdev, req); + 8005c00: 6839 ldr r1, [r7, #0] + 8005c02: 6878 ldr r0, [r7, #4] + 8005c04: f000 fa7a bl 80060fc + err++; + 8005c08: 7afb ldrb r3, [r7, #11] + 8005c0a: 3301 adds r3, #1 + 8005c0c: 72fb strb r3, [r7, #11] + break; + 8005c0e: e06f b.n 8005cf0 + + case USBD_IDX_PRODUCT_STR: + if (pdev->pDesc->GetProductStrDescriptor != NULL) + 8005c10: 687b ldr r3, [r7, #4] + 8005c12: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005c16: 68db ldr r3, [r3, #12] + 8005c18: 2b00 cmp r3, #0 + 8005c1a: d00b beq.n 8005c34 + { + pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len); + 8005c1c: 687b ldr r3, [r7, #4] + 8005c1e: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005c22: 68db ldr r3, [r3, #12] + 8005c24: 687a ldr r2, [r7, #4] + 8005c26: 7c12 ldrb r2, [r2, #16] + 8005c28: f107 0108 add.w r1, r7, #8 + 8005c2c: 4610 mov r0, r2 + 8005c2e: 4798 blx r3 + 8005c30: 60f8 str r0, [r7, #12] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005c32: e05d b.n 8005cf0 + USBD_CtlError(pdev, req); + 8005c34: 6839 ldr r1, [r7, #0] + 8005c36: 6878 ldr r0, [r7, #4] + 8005c38: f000 fa60 bl 80060fc + err++; + 8005c3c: 7afb ldrb r3, [r7, #11] + 8005c3e: 3301 adds r3, #1 + 8005c40: 72fb strb r3, [r7, #11] + break; + 8005c42: e055 b.n 8005cf0 + + case USBD_IDX_SERIAL_STR: + if (pdev->pDesc->GetSerialStrDescriptor != NULL) + 8005c44: 687b ldr r3, [r7, #4] + 8005c46: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005c4a: 691b ldr r3, [r3, #16] + 8005c4c: 2b00 cmp r3, #0 + 8005c4e: d00b beq.n 8005c68 + { + pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len); + 8005c50: 687b ldr r3, [r7, #4] + 8005c52: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005c56: 691b ldr r3, [r3, #16] + 8005c58: 687a ldr r2, [r7, #4] + 8005c5a: 7c12 ldrb r2, [r2, #16] + 8005c5c: f107 0108 add.w r1, r7, #8 + 8005c60: 4610 mov r0, r2 + 8005c62: 4798 blx r3 + 8005c64: 60f8 str r0, [r7, #12] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005c66: e043 b.n 8005cf0 + USBD_CtlError(pdev, req); + 8005c68: 6839 ldr r1, [r7, #0] + 8005c6a: 6878 ldr r0, [r7, #4] + 8005c6c: f000 fa46 bl 80060fc + err++; + 8005c70: 7afb ldrb r3, [r7, #11] + 8005c72: 3301 adds r3, #1 + 8005c74: 72fb strb r3, [r7, #11] + break; + 8005c76: e03b b.n 8005cf0 + + case USBD_IDX_CONFIG_STR: + if (pdev->pDesc->GetConfigurationStrDescriptor != NULL) + 8005c78: 687b ldr r3, [r7, #4] + 8005c7a: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005c7e: 695b ldr r3, [r3, #20] + 8005c80: 2b00 cmp r3, #0 + 8005c82: d00b beq.n 8005c9c + { + pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len); + 8005c84: 687b ldr r3, [r7, #4] + 8005c86: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005c8a: 695b ldr r3, [r3, #20] + 8005c8c: 687a ldr r2, [r7, #4] + 8005c8e: 7c12 ldrb r2, [r2, #16] + 8005c90: f107 0108 add.w r1, r7, #8 + 8005c94: 4610 mov r0, r2 + 8005c96: 4798 blx r3 + 8005c98: 60f8 str r0, [r7, #12] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005c9a: e029 b.n 8005cf0 + USBD_CtlError(pdev, req); + 8005c9c: 6839 ldr r1, [r7, #0] + 8005c9e: 6878 ldr r0, [r7, #4] + 8005ca0: f000 fa2c bl 80060fc + err++; + 8005ca4: 7afb ldrb r3, [r7, #11] + 8005ca6: 3301 adds r3, #1 + 8005ca8: 72fb strb r3, [r7, #11] + break; + 8005caa: e021 b.n 8005cf0 + + case USBD_IDX_INTERFACE_STR: + if (pdev->pDesc->GetInterfaceStrDescriptor != NULL) + 8005cac: 687b ldr r3, [r7, #4] + 8005cae: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005cb2: 699b ldr r3, [r3, #24] + 8005cb4: 2b00 cmp r3, #0 + 8005cb6: d00b beq.n 8005cd0 + { + pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len); + 8005cb8: 687b ldr r3, [r7, #4] + 8005cba: f8d3 32b0 ldr.w r3, [r3, #688] ; 0x2b0 + 8005cbe: 699b ldr r3, [r3, #24] + 8005cc0: 687a ldr r2, [r7, #4] + 8005cc2: 7c12 ldrb r2, [r2, #16] + 8005cc4: f107 0108 add.w r1, r7, #8 + 8005cc8: 4610 mov r0, r2 + 8005cca: 4798 blx r3 + 8005ccc: 60f8 str r0, [r7, #12] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005cce: e00f b.n 8005cf0 + USBD_CtlError(pdev, req); + 8005cd0: 6839 ldr r1, [r7, #0] + 8005cd2: 6878 ldr r0, [r7, #4] + 8005cd4: f000 fa12 bl 80060fc + err++; + 8005cd8: 7afb ldrb r3, [r7, #11] + 8005cda: 3301 adds r3, #1 + 8005cdc: 72fb strb r3, [r7, #11] + break; + 8005cde: e007 b.n 8005cf0 + USBD_CtlError(pdev, req); + err++; + } + break; +#else + USBD_CtlError(pdev, req); + 8005ce0: 6839 ldr r1, [r7, #0] + 8005ce2: 6878 ldr r0, [r7, #4] + 8005ce4: f000 fa0a bl 80060fc + err++; + 8005ce8: 7afb ldrb r3, [r7, #11] + 8005cea: 3301 adds r3, #1 + 8005cec: 72fb strb r3, [r7, #11] +#endif + } + break; + 8005cee: e038 b.n 8005d62 + 8005cf0: e037 b.n 8005d62 + + case USB_DESC_TYPE_DEVICE_QUALIFIER: + if (pdev->dev_speed == USBD_SPEED_HIGH) + 8005cf2: 687b ldr r3, [r7, #4] + 8005cf4: 7c1b ldrb r3, [r3, #16] + 8005cf6: 2b00 cmp r3, #0 + 8005cf8: d109 bne.n 8005d0e + { + pbuf = pdev->pClass->GetDeviceQualifierDescriptor(&len); + 8005cfa: 687b ldr r3, [r7, #4] + 8005cfc: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005d00: 6b5b ldr r3, [r3, #52] ; 0x34 + 8005d02: f107 0208 add.w r2, r7, #8 + 8005d06: 4610 mov r0, r2 + 8005d08: 4798 blx r3 + 8005d0a: 60f8 str r0, [r7, #12] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005d0c: e029 b.n 8005d62 + USBD_CtlError(pdev, req); + 8005d0e: 6839 ldr r1, [r7, #0] + 8005d10: 6878 ldr r0, [r7, #4] + 8005d12: f000 f9f3 bl 80060fc + err++; + 8005d16: 7afb ldrb r3, [r7, #11] + 8005d18: 3301 adds r3, #1 + 8005d1a: 72fb strb r3, [r7, #11] + break; + 8005d1c: e021 b.n 8005d62 + + case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION: + if (pdev->dev_speed == USBD_SPEED_HIGH) + 8005d1e: 687b ldr r3, [r7, #4] + 8005d20: 7c1b ldrb r3, [r3, #16] + 8005d22: 2b00 cmp r3, #0 + 8005d24: d10d bne.n 8005d42 + { + pbuf = pdev->pClass->GetOtherSpeedConfigDescriptor(&len); + 8005d26: 687b ldr r3, [r7, #4] + 8005d28: f8d3 32b4 ldr.w r3, [r3, #692] ; 0x2b4 + 8005d2c: 6b1b ldr r3, [r3, #48] ; 0x30 + 8005d2e: f107 0208 add.w r2, r7, #8 + 8005d32: 4610 mov r0, r2 + 8005d34: 4798 blx r3 + 8005d36: 60f8 str r0, [r7, #12] + pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION; + 8005d38: 68fb ldr r3, [r7, #12] + 8005d3a: 3301 adds r3, #1 + 8005d3c: 2207 movs r2, #7 + 8005d3e: 701a strb r2, [r3, #0] + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + 8005d40: e00f b.n 8005d62 + USBD_CtlError(pdev, req); + 8005d42: 6839 ldr r1, [r7, #0] + 8005d44: 6878 ldr r0, [r7, #4] + 8005d46: f000 f9d9 bl 80060fc + err++; + 8005d4a: 7afb ldrb r3, [r7, #11] + 8005d4c: 3301 adds r3, #1 + 8005d4e: 72fb strb r3, [r7, #11] + break; + 8005d50: e007 b.n 8005d62 + + default: + USBD_CtlError(pdev, req); + 8005d52: 6839 ldr r1, [r7, #0] + 8005d54: 6878 ldr r0, [r7, #4] + 8005d56: f000 f9d1 bl 80060fc + err++; + 8005d5a: 7afb ldrb r3, [r7, #11] + 8005d5c: 3301 adds r3, #1 + 8005d5e: 72fb strb r3, [r7, #11] + break; + 8005d60: bf00 nop + } + + if (err != 0U) + 8005d62: 7afb ldrb r3, [r7, #11] + 8005d64: 2b00 cmp r3, #0 + 8005d66: d11c bne.n 8005da2 + { + return; + } + else + { + if ((len != 0U) && (req->wLength != 0U)) + 8005d68: 893b ldrh r3, [r7, #8] + 8005d6a: 2b00 cmp r3, #0 + 8005d6c: d011 beq.n 8005d92 + 8005d6e: 683b ldr r3, [r7, #0] + 8005d70: 88db ldrh r3, [r3, #6] + 8005d72: 2b00 cmp r3, #0 + 8005d74: d00d beq.n 8005d92 + { + len = MIN(len, req->wLength); + 8005d76: 683b ldr r3, [r7, #0] + 8005d78: 88da ldrh r2, [r3, #6] + 8005d7a: 893b ldrh r3, [r7, #8] + 8005d7c: 4293 cmp r3, r2 + 8005d7e: bf28 it cs + 8005d80: 4613 movcs r3, r2 + 8005d82: b29b uxth r3, r3 + 8005d84: 813b strh r3, [r7, #8] + (void)USBD_CtlSendData(pdev, pbuf, len); + 8005d86: 893b ldrh r3, [r7, #8] + 8005d88: 461a mov r2, r3 + 8005d8a: 68f9 ldr r1, [r7, #12] + 8005d8c: 6878 ldr r0, [r7, #4] + 8005d8e: f000 fa1f bl 80061d0 + } + + if (req->wLength == 0U) + 8005d92: 683b ldr r3, [r7, #0] + 8005d94: 88db ldrh r3, [r3, #6] + 8005d96: 2b00 cmp r3, #0 + 8005d98: d104 bne.n 8005da4 + { + (void)USBD_CtlSendStatus(pdev); + 8005d9a: 6878 ldr r0, [r7, #4] + 8005d9c: f000 fa76 bl 800628c + 8005da0: e000 b.n 8005da4 + return; + 8005da2: bf00 nop + } + } +} + 8005da4: 3710 adds r7, #16 + 8005da6: 46bd mov sp, r7 + 8005da8: bd80 pop {r7, pc} + 8005daa: bf00 nop + +08005dac : +* @param req: usb request +* @retval status +*/ +static void USBD_SetAddress(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 8005dac: b580 push {r7, lr} + 8005dae: b084 sub sp, #16 + 8005db0: af00 add r7, sp, #0 + 8005db2: 6078 str r0, [r7, #4] + 8005db4: 6039 str r1, [r7, #0] + uint8_t dev_addr; + + if ((req->wIndex == 0U) && (req->wLength == 0U) && (req->wValue < 128U)) + 8005db6: 683b ldr r3, [r7, #0] + 8005db8: 889b ldrh r3, [r3, #4] + 8005dba: 2b00 cmp r3, #0 + 8005dbc: d130 bne.n 8005e20 + 8005dbe: 683b ldr r3, [r7, #0] + 8005dc0: 88db ldrh r3, [r3, #6] + 8005dc2: 2b00 cmp r3, #0 + 8005dc4: d12c bne.n 8005e20 + 8005dc6: 683b ldr r3, [r7, #0] + 8005dc8: 885b ldrh r3, [r3, #2] + 8005dca: 2b7f cmp r3, #127 ; 0x7f + 8005dcc: d828 bhi.n 8005e20 + { + dev_addr = (uint8_t)(req->wValue) & 0x7FU; + 8005dce: 683b ldr r3, [r7, #0] + 8005dd0: 885b ldrh r3, [r3, #2] + 8005dd2: b2db uxtb r3, r3 + 8005dd4: f003 037f and.w r3, r3, #127 ; 0x7f + 8005dd8: 73fb strb r3, [r7, #15] + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + 8005dda: 687b ldr r3, [r7, #4] + 8005ddc: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005de0: 2b03 cmp r3, #3 + 8005de2: d104 bne.n 8005dee + { + USBD_CtlError(pdev, req); + 8005de4: 6839 ldr r1, [r7, #0] + 8005de6: 6878 ldr r0, [r7, #4] + 8005de8: f000 f988 bl 80060fc + if (pdev->dev_state == USBD_STATE_CONFIGURED) + 8005dec: e01c b.n 8005e28 + } + else + { + pdev->dev_address = dev_addr; + 8005dee: 687b ldr r3, [r7, #4] + 8005df0: 7bfa ldrb r2, [r7, #15] + 8005df2: f883 229e strb.w r2, [r3, #670] ; 0x29e + USBD_LL_SetUSBAddress(pdev, dev_addr); + 8005df6: 7bfb ldrb r3, [r7, #15] + 8005df8: 4619 mov r1, r3 + 8005dfa: 6878 ldr r0, [r7, #4] + 8005dfc: f000 fe4c bl 8006a98 + USBD_CtlSendStatus(pdev); + 8005e00: 6878 ldr r0, [r7, #4] + 8005e02: f000 fa43 bl 800628c + + if (dev_addr != 0U) + 8005e06: 7bfb ldrb r3, [r7, #15] + 8005e08: 2b00 cmp r3, #0 + 8005e0a: d004 beq.n 8005e16 + { + pdev->dev_state = USBD_STATE_ADDRESSED; + 8005e0c: 687b ldr r3, [r7, #4] + 8005e0e: 2202 movs r2, #2 + 8005e10: f883 229c strb.w r2, [r3, #668] ; 0x29c + if (pdev->dev_state == USBD_STATE_CONFIGURED) + 8005e14: e008 b.n 8005e28 + } + else + { + pdev->dev_state = USBD_STATE_DEFAULT; + 8005e16: 687b ldr r3, [r7, #4] + 8005e18: 2201 movs r2, #1 + 8005e1a: f883 229c strb.w r2, [r3, #668] ; 0x29c + if (pdev->dev_state == USBD_STATE_CONFIGURED) + 8005e1e: e003 b.n 8005e28 + } + } + } + else + { + USBD_CtlError(pdev, req); + 8005e20: 6839 ldr r1, [r7, #0] + 8005e22: 6878 ldr r0, [r7, #4] + 8005e24: f000 f96a bl 80060fc + } +} + 8005e28: bf00 nop + 8005e2a: 3710 adds r7, #16 + 8005e2c: 46bd mov sp, r7 + 8005e2e: bd80 pop {r7, pc} + +08005e30 : +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + 8005e30: b580 push {r7, lr} + 8005e32: b082 sub sp, #8 + 8005e34: af00 add r7, sp, #0 + 8005e36: 6078 str r0, [r7, #4] + 8005e38: 6039 str r1, [r7, #0] + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + 8005e3a: 683b ldr r3, [r7, #0] + 8005e3c: 885b ldrh r3, [r3, #2] + 8005e3e: b2da uxtb r2, r3 + 8005e40: 4b41 ldr r3, [pc, #260] ; (8005f48 ) + 8005e42: 701a strb r2, [r3, #0] + + if (cfgidx > USBD_MAX_NUM_CONFIGURATION) + 8005e44: 4b40 ldr r3, [pc, #256] ; (8005f48 ) + 8005e46: 781b ldrb r3, [r3, #0] + 8005e48: 2b01 cmp r3, #1 + 8005e4a: d904 bls.n 8005e56 + { + USBD_CtlError(pdev, req); + 8005e4c: 6839 ldr r1, [r7, #0] + 8005e4e: 6878 ldr r0, [r7, #4] + 8005e50: f000 f954 bl 80060fc + 8005e54: e075 b.n 8005f42 + } + else + { + switch (pdev->dev_state) + 8005e56: 687b ldr r3, [r7, #4] + 8005e58: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005e5c: 2b02 cmp r3, #2 + 8005e5e: d002 beq.n 8005e66 + 8005e60: 2b03 cmp r3, #3 + 8005e62: d023 beq.n 8005eac + 8005e64: e062 b.n 8005f2c + { + case USBD_STATE_ADDRESSED: + if (cfgidx) + 8005e66: 4b38 ldr r3, [pc, #224] ; (8005f48 ) + 8005e68: 781b ldrb r3, [r3, #0] + 8005e6a: 2b00 cmp r3, #0 + 8005e6c: d01a beq.n 8005ea4 + { + pdev->dev_config = cfgidx; + 8005e6e: 4b36 ldr r3, [pc, #216] ; (8005f48 ) + 8005e70: 781b ldrb r3, [r3, #0] + 8005e72: 461a mov r2, r3 + 8005e74: 687b ldr r3, [r7, #4] + 8005e76: 605a str r2, [r3, #4] + pdev->dev_state = USBD_STATE_CONFIGURED; + 8005e78: 687b ldr r3, [r7, #4] + 8005e7a: 2203 movs r2, #3 + 8005e7c: f883 229c strb.w r2, [r3, #668] ; 0x29c + if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL) + 8005e80: 4b31 ldr r3, [pc, #196] ; (8005f48 ) + 8005e82: 781b ldrb r3, [r3, #0] + 8005e84: 4619 mov r1, r3 + 8005e86: 6878 ldr r0, [r7, #4] + 8005e88: f7ff f9f3 bl 8005272 + 8005e8c: 4603 mov r3, r0 + 8005e8e: 2b02 cmp r3, #2 + 8005e90: d104 bne.n 8005e9c + { + USBD_CtlError(pdev, req); + 8005e92: 6839 ldr r1, [r7, #0] + 8005e94: 6878 ldr r0, [r7, #4] + 8005e96: f000 f931 bl 80060fc + return; + 8005e9a: e052 b.n 8005f42 + } + USBD_CtlSendStatus(pdev); + 8005e9c: 6878 ldr r0, [r7, #4] + 8005e9e: f000 f9f5 bl 800628c + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + 8005ea2: e04e b.n 8005f42 + USBD_CtlSendStatus(pdev); + 8005ea4: 6878 ldr r0, [r7, #4] + 8005ea6: f000 f9f1 bl 800628c + break; + 8005eaa: e04a b.n 8005f42 + + case USBD_STATE_CONFIGURED: + if (cfgidx == 0U) + 8005eac: 4b26 ldr r3, [pc, #152] ; (8005f48 ) + 8005eae: 781b ldrb r3, [r3, #0] + 8005eb0: 2b00 cmp r3, #0 + 8005eb2: d112 bne.n 8005eda + { + pdev->dev_state = USBD_STATE_ADDRESSED; + 8005eb4: 687b ldr r3, [r7, #4] + 8005eb6: 2202 movs r2, #2 + 8005eb8: f883 229c strb.w r2, [r3, #668] ; 0x29c + pdev->dev_config = cfgidx; + 8005ebc: 4b22 ldr r3, [pc, #136] ; (8005f48 ) + 8005ebe: 781b ldrb r3, [r3, #0] + 8005ec0: 461a mov r2, r3 + 8005ec2: 687b ldr r3, [r7, #4] + 8005ec4: 605a str r2, [r3, #4] + USBD_ClrClassConfig(pdev, cfgidx); + 8005ec6: 4b20 ldr r3, [pc, #128] ; (8005f48 ) + 8005ec8: 781b ldrb r3, [r3, #0] + 8005eca: 4619 mov r1, r3 + 8005ecc: 6878 ldr r0, [r7, #4] + 8005ece: f7ff f9ef bl 80052b0 + USBD_CtlSendStatus(pdev); + 8005ed2: 6878 ldr r0, [r7, #4] + 8005ed4: f000 f9da bl 800628c + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + 8005ed8: e033 b.n 8005f42 + else if (cfgidx != pdev->dev_config) + 8005eda: 4b1b ldr r3, [pc, #108] ; (8005f48 ) + 8005edc: 781b ldrb r3, [r3, #0] + 8005ede: 461a mov r2, r3 + 8005ee0: 687b ldr r3, [r7, #4] + 8005ee2: 685b ldr r3, [r3, #4] + 8005ee4: 429a cmp r2, r3 + 8005ee6: d01d beq.n 8005f24 + USBD_ClrClassConfig(pdev, (uint8_t)pdev->dev_config); + 8005ee8: 687b ldr r3, [r7, #4] + 8005eea: 685b ldr r3, [r3, #4] + 8005eec: b2db uxtb r3, r3 + 8005eee: 4619 mov r1, r3 + 8005ef0: 6878 ldr r0, [r7, #4] + 8005ef2: f7ff f9dd bl 80052b0 + pdev->dev_config = cfgidx; + 8005ef6: 4b14 ldr r3, [pc, #80] ; (8005f48 ) + 8005ef8: 781b ldrb r3, [r3, #0] + 8005efa: 461a mov r2, r3 + 8005efc: 687b ldr r3, [r7, #4] + 8005efe: 605a str r2, [r3, #4] + if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL) + 8005f00: 4b11 ldr r3, [pc, #68] ; (8005f48 ) + 8005f02: 781b ldrb r3, [r3, #0] + 8005f04: 4619 mov r1, r3 + 8005f06: 6878 ldr r0, [r7, #4] + 8005f08: f7ff f9b3 bl 8005272 + 8005f0c: 4603 mov r3, r0 + 8005f0e: 2b02 cmp r3, #2 + 8005f10: d104 bne.n 8005f1c + USBD_CtlError(pdev, req); + 8005f12: 6839 ldr r1, [r7, #0] + 8005f14: 6878 ldr r0, [r7, #4] + 8005f16: f000 f8f1 bl 80060fc + return; + 8005f1a: e012 b.n 8005f42 + USBD_CtlSendStatus(pdev); + 8005f1c: 6878 ldr r0, [r7, #4] + 8005f1e: f000 f9b5 bl 800628c + break; + 8005f22: e00e b.n 8005f42 + USBD_CtlSendStatus(pdev); + 8005f24: 6878 ldr r0, [r7, #4] + 8005f26: f000 f9b1 bl 800628c + break; + 8005f2a: e00a b.n 8005f42 + + default: + USBD_CtlError(pdev, req); + 8005f2c: 6839 ldr r1, [r7, #0] + 8005f2e: 6878 ldr r0, [r7, #4] + 8005f30: f000 f8e4 bl 80060fc + USBD_ClrClassConfig(pdev, cfgidx); + 8005f34: 4b04 ldr r3, [pc, #16] ; (8005f48 ) + 8005f36: 781b ldrb r3, [r3, #0] + 8005f38: 4619 mov r1, r3 + 8005f3a: 6878 ldr r0, [r7, #4] + 8005f3c: f7ff f9b8 bl 80052b0 + break; + 8005f40: bf00 nop + } + } +} + 8005f42: 3708 adds r7, #8 + 8005f44: 46bd mov sp, r7 + 8005f46: bd80 pop {r7, pc} + 8005f48: 20000198 .word 0x20000198 + +08005f4c : +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + 8005f4c: b580 push {r7, lr} + 8005f4e: b082 sub sp, #8 + 8005f50: af00 add r7, sp, #0 + 8005f52: 6078 str r0, [r7, #4] + 8005f54: 6039 str r1, [r7, #0] + if (req->wLength != 1U) + 8005f56: 683b ldr r3, [r7, #0] + 8005f58: 88db ldrh r3, [r3, #6] + 8005f5a: 2b01 cmp r3, #1 + 8005f5c: d004 beq.n 8005f68 + { + USBD_CtlError(pdev, req); + 8005f5e: 6839 ldr r1, [r7, #0] + 8005f60: 6878 ldr r0, [r7, #4] + 8005f62: f000 f8cb bl 80060fc + default: + USBD_CtlError(pdev, req); + break; + } + } +} + 8005f66: e021 b.n 8005fac + switch (pdev->dev_state) + 8005f68: 687b ldr r3, [r7, #4] + 8005f6a: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005f6e: 2b01 cmp r3, #1 + 8005f70: db17 blt.n 8005fa2 + 8005f72: 2b02 cmp r3, #2 + 8005f74: dd02 ble.n 8005f7c + 8005f76: 2b03 cmp r3, #3 + 8005f78: d00b beq.n 8005f92 + 8005f7a: e012 b.n 8005fa2 + pdev->dev_default_config = 0U; + 8005f7c: 687b ldr r3, [r7, #4] + 8005f7e: 2200 movs r2, #0 + 8005f80: 609a str r2, [r3, #8] + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_default_config, 1U); + 8005f82: 687b ldr r3, [r7, #4] + 8005f84: 3308 adds r3, #8 + 8005f86: 2201 movs r2, #1 + 8005f88: 4619 mov r1, r3 + 8005f8a: 6878 ldr r0, [r7, #4] + 8005f8c: f000 f920 bl 80061d0 + break; + 8005f90: e00c b.n 8005fac + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config, 1U); + 8005f92: 687b ldr r3, [r7, #4] + 8005f94: 3304 adds r3, #4 + 8005f96: 2201 movs r2, #1 + 8005f98: 4619 mov r1, r3 + 8005f9a: 6878 ldr r0, [r7, #4] + 8005f9c: f000 f918 bl 80061d0 + break; + 8005fa0: e004 b.n 8005fac + USBD_CtlError(pdev, req); + 8005fa2: 6839 ldr r1, [r7, #0] + 8005fa4: 6878 ldr r0, [r7, #4] + 8005fa6: f000 f8a9 bl 80060fc + break; + 8005faa: bf00 nop +} + 8005fac: bf00 nop + 8005fae: 3708 adds r7, #8 + 8005fb0: 46bd mov sp, r7 + 8005fb2: bd80 pop {r7, pc} + +08005fb4 : +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetStatus(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + 8005fb4: b580 push {r7, lr} + 8005fb6: b082 sub sp, #8 + 8005fb8: af00 add r7, sp, #0 + 8005fba: 6078 str r0, [r7, #4] + 8005fbc: 6039 str r1, [r7, #0] + switch (pdev->dev_state) + 8005fbe: 687b ldr r3, [r7, #4] + 8005fc0: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8005fc4: 3b01 subs r3, #1 + 8005fc6: 2b02 cmp r3, #2 + 8005fc8: d81e bhi.n 8006008 + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wLength != 0x2U) + 8005fca: 683b ldr r3, [r7, #0] + 8005fcc: 88db ldrh r3, [r3, #6] + 8005fce: 2b02 cmp r3, #2 + 8005fd0: d004 beq.n 8005fdc + { + USBD_CtlError(pdev, req); + 8005fd2: 6839 ldr r1, [r7, #0] + 8005fd4: 6878 ldr r0, [r7, #4] + 8005fd6: f000 f891 bl 80060fc + break; + 8005fda: e01a b.n 8006012 + } + +#if (USBD_SELF_POWERED == 1U) + pdev->dev_config_status = USB_CONFIG_SELF_POWERED; + 8005fdc: 687b ldr r3, [r7, #4] + 8005fde: 2201 movs r2, #1 + 8005fe0: 60da str r2, [r3, #12] +#else + pdev->dev_config_status = 0U; +#endif + + if (pdev->dev_remote_wakeup) + 8005fe2: 687b ldr r3, [r7, #4] + 8005fe4: f8d3 32a4 ldr.w r3, [r3, #676] ; 0x2a4 + 8005fe8: 2b00 cmp r3, #0 + 8005fea: d005 beq.n 8005ff8 + { + pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP; + 8005fec: 687b ldr r3, [r7, #4] + 8005fee: 68db ldr r3, [r3, #12] + 8005ff0: f043 0202 orr.w r2, r3, #2 + 8005ff4: 687b ldr r3, [r7, #4] + 8005ff6: 60da str r2, [r3, #12] + } + + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config_status, 2U); + 8005ff8: 687b ldr r3, [r7, #4] + 8005ffa: 330c adds r3, #12 + 8005ffc: 2202 movs r2, #2 + 8005ffe: 4619 mov r1, r3 + 8006000: 6878 ldr r0, [r7, #4] + 8006002: f000 f8e5 bl 80061d0 + break; + 8006006: e004 b.n 8006012 + + default: + USBD_CtlError(pdev, req); + 8006008: 6839 ldr r1, [r7, #0] + 800600a: 6878 ldr r0, [r7, #4] + 800600c: f000 f876 bl 80060fc + break; + 8006010: bf00 nop + } +} + 8006012: bf00 nop + 8006014: 3708 adds r7, #8 + 8006016: 46bd mov sp, r7 + 8006018: bd80 pop {r7, pc} + +0800601a : +* @param req: usb request +* @retval status +*/ +static void USBD_SetFeature(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 800601a: b580 push {r7, lr} + 800601c: b082 sub sp, #8 + 800601e: af00 add r7, sp, #0 + 8006020: 6078 str r0, [r7, #4] + 8006022: 6039 str r1, [r7, #0] + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + 8006024: 683b ldr r3, [r7, #0] + 8006026: 885b ldrh r3, [r3, #2] + 8006028: 2b01 cmp r3, #1 + 800602a: d106 bne.n 800603a + { + pdev->dev_remote_wakeup = 1U; + 800602c: 687b ldr r3, [r7, #4] + 800602e: 2201 movs r2, #1 + 8006030: f8c3 22a4 str.w r2, [r3, #676] ; 0x2a4 + USBD_CtlSendStatus(pdev); + 8006034: 6878 ldr r0, [r7, #4] + 8006036: f000 f929 bl 800628c + } +} + 800603a: bf00 nop + 800603c: 3708 adds r7, #8 + 800603e: 46bd mov sp, r7 + 8006040: bd80 pop {r7, pc} + +08006042 : +* @param req: usb request +* @retval status +*/ +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 8006042: b580 push {r7, lr} + 8006044: b082 sub sp, #8 + 8006046: af00 add r7, sp, #0 + 8006048: 6078 str r0, [r7, #4] + 800604a: 6039 str r1, [r7, #0] + switch (pdev->dev_state) + 800604c: 687b ldr r3, [r7, #4] + 800604e: f893 329c ldrb.w r3, [r3, #668] ; 0x29c + 8006052: 3b01 subs r3, #1 + 8006054: 2b02 cmp r3, #2 + 8006056: d80b bhi.n 8006070 + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + 8006058: 683b ldr r3, [r7, #0] + 800605a: 885b ldrh r3, [r3, #2] + 800605c: 2b01 cmp r3, #1 + 800605e: d10c bne.n 800607a + { + pdev->dev_remote_wakeup = 0U; + 8006060: 687b ldr r3, [r7, #4] + 8006062: 2200 movs r2, #0 + 8006064: f8c3 22a4 str.w r2, [r3, #676] ; 0x2a4 + USBD_CtlSendStatus(pdev); + 8006068: 6878 ldr r0, [r7, #4] + 800606a: f000 f90f bl 800628c + } + break; + 800606e: e004 b.n 800607a + + default: + USBD_CtlError(pdev, req); + 8006070: 6839 ldr r1, [r7, #0] + 8006072: 6878 ldr r0, [r7, #4] + 8006074: f000 f842 bl 80060fc + break; + 8006078: e000 b.n 800607c + break; + 800607a: bf00 nop + } +} + 800607c: bf00 nop + 800607e: 3708 adds r7, #8 + 8006080: 46bd mov sp, r7 + 8006082: bd80 pop {r7, pc} + +08006084 : +* @param req: usb request +* @retval None +*/ + +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata) +{ + 8006084: b480 push {r7} + 8006086: b083 sub sp, #12 + 8006088: af00 add r7, sp, #0 + 800608a: 6078 str r0, [r7, #4] + 800608c: 6039 str r1, [r7, #0] + req->bmRequest = *(uint8_t *)(pdata); + 800608e: 683b ldr r3, [r7, #0] + 8006090: 781a ldrb r2, [r3, #0] + 8006092: 687b ldr r3, [r7, #4] + 8006094: 701a strb r2, [r3, #0] + req->bRequest = *(uint8_t *)(pdata + 1U); + 8006096: 683b ldr r3, [r7, #0] + 8006098: 785a ldrb r2, [r3, #1] + 800609a: 687b ldr r3, [r7, #4] + 800609c: 705a strb r2, [r3, #1] + req->wValue = SWAPBYTE(pdata + 2U); + 800609e: 683b ldr r3, [r7, #0] + 80060a0: 3302 adds r3, #2 + 80060a2: 781b ldrb r3, [r3, #0] + 80060a4: b29a uxth r2, r3 + 80060a6: 683b ldr r3, [r7, #0] + 80060a8: 3303 adds r3, #3 + 80060aa: 781b ldrb r3, [r3, #0] + 80060ac: b29b uxth r3, r3 + 80060ae: 021b lsls r3, r3, #8 + 80060b0: b29b uxth r3, r3 + 80060b2: 4413 add r3, r2 + 80060b4: b29a uxth r2, r3 + 80060b6: 687b ldr r3, [r7, #4] + 80060b8: 805a strh r2, [r3, #2] + req->wIndex = SWAPBYTE(pdata + 4U); + 80060ba: 683b ldr r3, [r7, #0] + 80060bc: 3304 adds r3, #4 + 80060be: 781b ldrb r3, [r3, #0] + 80060c0: b29a uxth r2, r3 + 80060c2: 683b ldr r3, [r7, #0] + 80060c4: 3305 adds r3, #5 + 80060c6: 781b ldrb r3, [r3, #0] + 80060c8: b29b uxth r3, r3 + 80060ca: 021b lsls r3, r3, #8 + 80060cc: b29b uxth r3, r3 + 80060ce: 4413 add r3, r2 + 80060d0: b29a uxth r2, r3 + 80060d2: 687b ldr r3, [r7, #4] + 80060d4: 809a strh r2, [r3, #4] + req->wLength = SWAPBYTE(pdata + 6U); + 80060d6: 683b ldr r3, [r7, #0] + 80060d8: 3306 adds r3, #6 + 80060da: 781b ldrb r3, [r3, #0] + 80060dc: b29a uxth r2, r3 + 80060de: 683b ldr r3, [r7, #0] + 80060e0: 3307 adds r3, #7 + 80060e2: 781b ldrb r3, [r3, #0] + 80060e4: b29b uxth r3, r3 + 80060e6: 021b lsls r3, r3, #8 + 80060e8: b29b uxth r3, r3 + 80060ea: 4413 add r3, r2 + 80060ec: b29a uxth r2, r3 + 80060ee: 687b ldr r3, [r7, #4] + 80060f0: 80da strh r2, [r3, #6] + +} + 80060f2: bf00 nop + 80060f4: 370c adds r7, #12 + 80060f6: 46bd mov sp, r7 + 80060f8: bc80 pop {r7} + 80060fa: 4770 bx lr + +080060fc : +* @retval None +*/ + +void USBD_CtlError(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + 80060fc: b580 push {r7, lr} + 80060fe: b082 sub sp, #8 + 8006100: af00 add r7, sp, #0 + 8006102: 6078 str r0, [r7, #4] + 8006104: 6039 str r1, [r7, #0] + USBD_LL_StallEP(pdev, 0x80U); + 8006106: 2180 movs r1, #128 ; 0x80 + 8006108: 6878 ldr r0, [r7, #4] + 800610a: f000 fc5b bl 80069c4 + USBD_LL_StallEP(pdev, 0U); + 800610e: 2100 movs r1, #0 + 8006110: 6878 ldr r0, [r7, #4] + 8006112: f000 fc57 bl 80069c4 +} + 8006116: bf00 nop + 8006118: 3708 adds r7, #8 + 800611a: 46bd mov sp, r7 + 800611c: bd80 pop {r7, pc} + +0800611e : + * @param unicode : Formatted string buffer (unicode) + * @param len : descriptor length + * @retval None + */ +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len) +{ + 800611e: b580 push {r7, lr} + 8006120: b086 sub sp, #24 + 8006122: af00 add r7, sp, #0 + 8006124: 60f8 str r0, [r7, #12] + 8006126: 60b9 str r1, [r7, #8] + 8006128: 607a str r2, [r7, #4] + uint8_t idx = 0U; + 800612a: 2300 movs r3, #0 + 800612c: 75fb strb r3, [r7, #23] + + if (desc != NULL) + 800612e: 68fb ldr r3, [r7, #12] + 8006130: 2b00 cmp r3, #0 + 8006132: d032 beq.n 800619a + { + *len = (uint16_t)USBD_GetLen(desc) * 2U + 2U; + 8006134: 68f8 ldr r0, [r7, #12] + 8006136: f000 f834 bl 80061a2 + 800613a: 4603 mov r3, r0 + 800613c: 3301 adds r3, #1 + 800613e: b29b uxth r3, r3 + 8006140: 005b lsls r3, r3, #1 + 8006142: b29a uxth r2, r3 + 8006144: 687b ldr r3, [r7, #4] + 8006146: 801a strh r2, [r3, #0] + unicode[idx++] = *(uint8_t *)(void *)len; + 8006148: 7dfb ldrb r3, [r7, #23] + 800614a: 1c5a adds r2, r3, #1 + 800614c: 75fa strb r2, [r7, #23] + 800614e: 461a mov r2, r3 + 8006150: 68bb ldr r3, [r7, #8] + 8006152: 4413 add r3, r2 + 8006154: 687a ldr r2, [r7, #4] + 8006156: 7812 ldrb r2, [r2, #0] + 8006158: 701a strb r2, [r3, #0] + unicode[idx++] = USB_DESC_TYPE_STRING; + 800615a: 7dfb ldrb r3, [r7, #23] + 800615c: 1c5a adds r2, r3, #1 + 800615e: 75fa strb r2, [r7, #23] + 8006160: 461a mov r2, r3 + 8006162: 68bb ldr r3, [r7, #8] + 8006164: 4413 add r3, r2 + 8006166: 2203 movs r2, #3 + 8006168: 701a strb r2, [r3, #0] + + while (*desc != '\0') + 800616a: e012 b.n 8006192 + { + unicode[idx++] = *desc++; + 800616c: 68fb ldr r3, [r7, #12] + 800616e: 1c5a adds r2, r3, #1 + 8006170: 60fa str r2, [r7, #12] + 8006172: 7dfa ldrb r2, [r7, #23] + 8006174: 1c51 adds r1, r2, #1 + 8006176: 75f9 strb r1, [r7, #23] + 8006178: 4611 mov r1, r2 + 800617a: 68ba ldr r2, [r7, #8] + 800617c: 440a add r2, r1 + 800617e: 781b ldrb r3, [r3, #0] + 8006180: 7013 strb r3, [r2, #0] + unicode[idx++] = 0U; + 8006182: 7dfb ldrb r3, [r7, #23] + 8006184: 1c5a adds r2, r3, #1 + 8006186: 75fa strb r2, [r7, #23] + 8006188: 461a mov r2, r3 + 800618a: 68bb ldr r3, [r7, #8] + 800618c: 4413 add r3, r2 + 800618e: 2200 movs r2, #0 + 8006190: 701a strb r2, [r3, #0] + while (*desc != '\0') + 8006192: 68fb ldr r3, [r7, #12] + 8006194: 781b ldrb r3, [r3, #0] + 8006196: 2b00 cmp r3, #0 + 8006198: d1e8 bne.n 800616c + } + } +} + 800619a: bf00 nop + 800619c: 3718 adds r7, #24 + 800619e: 46bd mov sp, r7 + 80061a0: bd80 pop {r7, pc} + +080061a2 : + * return the string length + * @param buf : pointer to the ascii string buffer + * @retval string length + */ +static uint8_t USBD_GetLen(uint8_t *buf) +{ + 80061a2: b480 push {r7} + 80061a4: b085 sub sp, #20 + 80061a6: af00 add r7, sp, #0 + 80061a8: 6078 str r0, [r7, #4] + uint8_t len = 0U; + 80061aa: 2300 movs r3, #0 + 80061ac: 73fb strb r3, [r7, #15] + + while (*buf != '\0') + 80061ae: e005 b.n 80061bc + { + len++; + 80061b0: 7bfb ldrb r3, [r7, #15] + 80061b2: 3301 adds r3, #1 + 80061b4: 73fb strb r3, [r7, #15] + buf++; + 80061b6: 687b ldr r3, [r7, #4] + 80061b8: 3301 adds r3, #1 + 80061ba: 607b str r3, [r7, #4] + while (*buf != '\0') + 80061bc: 687b ldr r3, [r7, #4] + 80061be: 781b ldrb r3, [r3, #0] + 80061c0: 2b00 cmp r3, #0 + 80061c2: d1f5 bne.n 80061b0 + } + + return len; + 80061c4: 7bfb ldrb r3, [r7, #15] +} + 80061c6: 4618 mov r0, r3 + 80061c8: 3714 adds r7, #20 + 80061ca: 46bd mov sp, r7 + 80061cc: bc80 pop {r7} + 80061ce: 4770 bx lr + +080061d0 : +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + 80061d0: b580 push {r7, lr} + 80061d2: b084 sub sp, #16 + 80061d4: af00 add r7, sp, #0 + 80061d6: 60f8 str r0, [r7, #12] + 80061d8: 60b9 str r1, [r7, #8] + 80061da: 4613 mov r3, r2 + 80061dc: 80fb strh r3, [r7, #6] + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_IN; + 80061de: 68fb ldr r3, [r7, #12] + 80061e0: 2202 movs r2, #2 + 80061e2: f8c3 2294 str.w r2, [r3, #660] ; 0x294 + pdev->ep_in[0].total_length = len; + 80061e6: 88fa ldrh r2, [r7, #6] + 80061e8: 68fb ldr r3, [r7, #12] + 80061ea: 61da str r2, [r3, #28] + pdev->ep_in[0].rem_length = len; + 80061ec: 88fa ldrh r2, [r7, #6] + 80061ee: 68fb ldr r3, [r7, #12] + 80061f0: 621a str r2, [r3, #32] + + /* Start the transfer */ + USBD_LL_Transmit(pdev, 0x00U, pbuf, len); + 80061f2: 88fb ldrh r3, [r7, #6] + 80061f4: 68ba ldr r2, [r7, #8] + 80061f6: 2100 movs r1, #0 + 80061f8: 68f8 ldr r0, [r7, #12] + 80061fa: f000 fc6c bl 8006ad6 + + return USBD_OK; + 80061fe: 2300 movs r3, #0 +} + 8006200: 4618 mov r0, r3 + 8006202: 3710 adds r7, #16 + 8006204: 46bd mov sp, r7 + 8006206: bd80 pop {r7, pc} + +08006208 : +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + 8006208: b580 push {r7, lr} + 800620a: b084 sub sp, #16 + 800620c: af00 add r7, sp, #0 + 800620e: 60f8 str r0, [r7, #12] + 8006210: 60b9 str r1, [r7, #8] + 8006212: 4613 mov r3, r2 + 8006214: 80fb strh r3, [r7, #6] + /* Start the next transfer */ + USBD_LL_Transmit(pdev, 0x00U, pbuf, len); + 8006216: 88fb ldrh r3, [r7, #6] + 8006218: 68ba ldr r2, [r7, #8] + 800621a: 2100 movs r1, #0 + 800621c: 68f8 ldr r0, [r7, #12] + 800621e: f000 fc5a bl 8006ad6 + + return USBD_OK; + 8006222: 2300 movs r3, #0 +} + 8006224: 4618 mov r0, r3 + 8006226: 3710 adds r7, #16 + 8006228: 46bd mov sp, r7 + 800622a: bd80 pop {r7, pc} + +0800622c : +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + 800622c: b580 push {r7, lr} + 800622e: b084 sub sp, #16 + 8006230: af00 add r7, sp, #0 + 8006232: 60f8 str r0, [r7, #12] + 8006234: 60b9 str r1, [r7, #8] + 8006236: 4613 mov r3, r2 + 8006238: 80fb strh r3, [r7, #6] + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_OUT; + 800623a: 68fb ldr r3, [r7, #12] + 800623c: 2203 movs r2, #3 + 800623e: f8c3 2294 str.w r2, [r3, #660] ; 0x294 + pdev->ep_out[0].total_length = len; + 8006242: 88fa ldrh r2, [r7, #6] + 8006244: 68fb ldr r3, [r7, #12] + 8006246: f8c3 215c str.w r2, [r3, #348] ; 0x15c + pdev->ep_out[0].rem_length = len; + 800624a: 88fa ldrh r2, [r7, #6] + 800624c: 68fb ldr r3, [r7, #12] + 800624e: f8c3 2160 str.w r2, [r3, #352] ; 0x160 + + /* Start the transfer */ + USBD_LL_PrepareReceive(pdev, 0U, pbuf, len); + 8006252: 88fb ldrh r3, [r7, #6] + 8006254: 68ba ldr r2, [r7, #8] + 8006256: 2100 movs r1, #0 + 8006258: 68f8 ldr r0, [r7, #12] + 800625a: f000 fc5f bl 8006b1c + + return USBD_OK; + 800625e: 2300 movs r3, #0 +} + 8006260: 4618 mov r0, r3 + 8006262: 3710 adds r7, #16 + 8006264: 46bd mov sp, r7 + 8006266: bd80 pop {r7, pc} + +08006268 : +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + 8006268: b580 push {r7, lr} + 800626a: b084 sub sp, #16 + 800626c: af00 add r7, sp, #0 + 800626e: 60f8 str r0, [r7, #12] + 8006270: 60b9 str r1, [r7, #8] + 8006272: 4613 mov r3, r2 + 8006274: 80fb strh r3, [r7, #6] + USBD_LL_PrepareReceive(pdev, 0U, pbuf, len); + 8006276: 88fb ldrh r3, [r7, #6] + 8006278: 68ba ldr r2, [r7, #8] + 800627a: 2100 movs r1, #0 + 800627c: 68f8 ldr r0, [r7, #12] + 800627e: f000 fc4d bl 8006b1c + + return USBD_OK; + 8006282: 2300 movs r3, #0 +} + 8006284: 4618 mov r0, r3 + 8006286: 3710 adds r7, #16 + 8006288: 46bd mov sp, r7 + 800628a: bd80 pop {r7, pc} + +0800628c : +* send zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev) +{ + 800628c: b580 push {r7, lr} + 800628e: b082 sub sp, #8 + 8006290: af00 add r7, sp, #0 + 8006292: 6078 str r0, [r7, #4] + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_IN; + 8006294: 687b ldr r3, [r7, #4] + 8006296: 2204 movs r2, #4 + 8006298: f8c3 2294 str.w r2, [r3, #660] ; 0x294 + + /* Start the transfer */ + USBD_LL_Transmit(pdev, 0x00U, NULL, 0U); + 800629c: 2300 movs r3, #0 + 800629e: 2200 movs r2, #0 + 80062a0: 2100 movs r1, #0 + 80062a2: 6878 ldr r0, [r7, #4] + 80062a4: f000 fc17 bl 8006ad6 + + return USBD_OK; + 80062a8: 2300 movs r3, #0 +} + 80062aa: 4618 mov r0, r3 + 80062ac: 3708 adds r7, #8 + 80062ae: 46bd mov sp, r7 + 80062b0: bd80 pop {r7, pc} + +080062b2 : +* receive zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev) +{ + 80062b2: b580 push {r7, lr} + 80062b4: b082 sub sp, #8 + 80062b6: af00 add r7, sp, #0 + 80062b8: 6078 str r0, [r7, #4] + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_OUT; + 80062ba: 687b ldr r3, [r7, #4] + 80062bc: 2205 movs r2, #5 + 80062be: f8c3 2294 str.w r2, [r3, #660] ; 0x294 + + /* Start the transfer */ + USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + 80062c2: 2300 movs r3, #0 + 80062c4: 2200 movs r2, #0 + 80062c6: 2100 movs r1, #0 + 80062c8: 6878 ldr r0, [r7, #4] + 80062ca: f000 fc27 bl 8006b1c + + return USBD_OK; + 80062ce: 2300 movs r3, #0 +} + 80062d0: 4618 mov r0, r3 + 80062d2: 3708 adds r7, #8 + 80062d4: 46bd mov sp, r7 + 80062d6: bd80 pop {r7, pc} + +080062d8 : +/** + * Init USB device Library, add supported class and start the library + * @retval None + */ +void MX_USB_DEVICE_Init(void) +{ + 80062d8: b580 push {r7, lr} + 80062da: af00 add r7, sp, #0 + /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */ + + /* USER CODE END USB_DEVICE_Init_PreTreatment */ + + /* Init Device Library, add supported class and start the library. */ + if (USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS) != USBD_OK) + 80062dc: 2200 movs r2, #0 + 80062de: 4912 ldr r1, [pc, #72] ; (8006328 ) + 80062e0: 4812 ldr r0, [pc, #72] ; (800632c ) + 80062e2: f7fe ff6c bl 80051be + 80062e6: 4603 mov r3, r0 + 80062e8: 2b00 cmp r3, #0 + 80062ea: d001 beq.n 80062f0 + { + Error_Handler(); + 80062ec: f7fa f81c bl 8000328 + } + if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC) != USBD_OK) + 80062f0: 490f ldr r1, [pc, #60] ; (8006330 ) + 80062f2: 480e ldr r0, [pc, #56] ; (800632c ) + 80062f4: f7fe ff8e bl 8005214 + 80062f8: 4603 mov r3, r0 + 80062fa: 2b00 cmp r3, #0 + 80062fc: d001 beq.n 8006302 + { + Error_Handler(); + 80062fe: f7fa f813 bl 8000328 + } + if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK) + 8006302: 490c ldr r1, [pc, #48] ; (8006334 ) + 8006304: 4809 ldr r0, [pc, #36] ; (800632c ) + 8006306: f7fe febf bl 8005088 + 800630a: 4603 mov r3, r0 + 800630c: 2b00 cmp r3, #0 + 800630e: d001 beq.n 8006314 + { + Error_Handler(); + 8006310: f7fa f80a bl 8000328 + } + if (USBD_Start(&hUsbDeviceFS) != USBD_OK) + 8006314: 4805 ldr r0, [pc, #20] ; (800632c ) + 8006316: f7fe ff96 bl 8005246 + 800631a: 4603 mov r3, r0 + 800631c: 2b00 cmp r3, #0 + 800631e: d001 beq.n 8006324 + { + Error_Handler(); + 8006320: f7fa f802 bl 8000328 + } + + /* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */ + + /* USER CODE END USB_DEVICE_Init_PostTreatment */ +} + 8006324: bf00 nop + 8006326: bd80 pop {r7, pc} + 8006328: 2000012c .word 0x2000012c + 800632c: 200003c0 .word 0x200003c0 + 8006330: 20000018 .word 0x20000018 + 8006334: 2000011c .word 0x2000011c + +08006338 : +/** + * @brief Initializes the CDC media low layer over the FS USB IP + * @retval USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Init_FS(void) +{ + 8006338: b580 push {r7, lr} + 800633a: af00 add r7, sp, #0 + /* USER CODE BEGIN 3 */ + /* Set Application Buffers */ + USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0); + 800633c: 2200 movs r2, #0 + 800633e: 4905 ldr r1, [pc, #20] ; (8006354 ) + 8006340: 4805 ldr r0, [pc, #20] ; (8006358 ) + 8006342: f7fe feb7 bl 80050b4 + USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS); + 8006346: 4905 ldr r1, [pc, #20] ; (800635c ) + 8006348: 4803 ldr r0, [pc, #12] ; (8006358 ) + 800634a: f7fe fecc bl 80050e6 + return (USBD_OK); + 800634e: 2300 movs r3, #0 + /* USER CODE END 3 */ +} + 8006350: 4618 mov r0, r3 + 8006352: bd80 pop {r7, pc} + 8006354: 20000a6c .word 0x20000a6c + 8006358: 200003c0 .word 0x200003c0 + 800635c: 20000684 .word 0x20000684 + +08006360 : +/** + * @brief DeInitializes the CDC media low layer + * @retval USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_DeInit_FS(void) +{ + 8006360: b480 push {r7} + 8006362: af00 add r7, sp, #0 + /* USER CODE BEGIN 4 */ + return (USBD_OK); + 8006364: 2300 movs r3, #0 + /* USER CODE END 4 */ +} + 8006366: 4618 mov r0, r3 + 8006368: 46bd mov sp, r7 + 800636a: bc80 pop {r7} + 800636c: 4770 bx lr + ... + +08006370 : + * @param pbuf: Buffer containing command data (request parameters) + * @param length: Number of data to be sent (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length) +{ + 8006370: b480 push {r7} + 8006372: b083 sub sp, #12 + 8006374: af00 add r7, sp, #0 + 8006376: 4603 mov r3, r0 + 8006378: 6039 str r1, [r7, #0] + 800637a: 71fb strb r3, [r7, #7] + 800637c: 4613 mov r3, r2 + 800637e: 80bb strh r3, [r7, #4] + /* USER CODE BEGIN 5 */ + switch(cmd) + 8006380: 79fb ldrb r3, [r7, #7] + 8006382: 2b23 cmp r3, #35 ; 0x23 + 8006384: d84a bhi.n 800641c + 8006386: a201 add r2, pc, #4 ; (adr r2, 800638c ) + 8006388: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 800638c: 0800641d .word 0x0800641d + 8006390: 0800641d .word 0x0800641d + 8006394: 0800641d .word 0x0800641d + 8006398: 0800641d .word 0x0800641d + 800639c: 0800641d .word 0x0800641d + 80063a0: 0800641d .word 0x0800641d + 80063a4: 0800641d .word 0x0800641d + 80063a8: 0800641d .word 0x0800641d + 80063ac: 0800641d .word 0x0800641d + 80063b0: 0800641d .word 0x0800641d + 80063b4: 0800641d .word 0x0800641d + 80063b8: 0800641d .word 0x0800641d + 80063bc: 0800641d .word 0x0800641d + 80063c0: 0800641d .word 0x0800641d + 80063c4: 0800641d .word 0x0800641d + 80063c8: 0800641d .word 0x0800641d + 80063cc: 0800641d .word 0x0800641d + 80063d0: 0800641d .word 0x0800641d + 80063d4: 0800641d .word 0x0800641d + 80063d8: 0800641d .word 0x0800641d + 80063dc: 0800641d .word 0x0800641d + 80063e0: 0800641d .word 0x0800641d + 80063e4: 0800641d .word 0x0800641d + 80063e8: 0800641d .word 0x0800641d + 80063ec: 0800641d .word 0x0800641d + 80063f0: 0800641d .word 0x0800641d + 80063f4: 0800641d .word 0x0800641d + 80063f8: 0800641d .word 0x0800641d + 80063fc: 0800641d .word 0x0800641d + 8006400: 0800641d .word 0x0800641d + 8006404: 0800641d .word 0x0800641d + 8006408: 0800641d .word 0x0800641d + 800640c: 0800641d .word 0x0800641d + 8006410: 0800641d .word 0x0800641d + 8006414: 0800641d .word 0x0800641d + 8006418: 0800641d .word 0x0800641d + case CDC_SEND_BREAK: + + break; + + default: + break; + 800641c: bf00 nop + } + + return (USBD_OK); + 800641e: 2300 movs r3, #0 + /* USER CODE END 5 */ +} + 8006420: 4618 mov r0, r3 + 8006422: 370c adds r7, #12 + 8006424: 46bd mov sp, r7 + 8006426: bc80 pop {r7} + 8006428: 4770 bx lr + 800642a: bf00 nop + +0800642c : + * @param Buf: Buffer of data to be received + * @param Len: Number of data received (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len) +{ + 800642c: b580 push {r7, lr} + 800642e: b082 sub sp, #8 + 8006430: af00 add r7, sp, #0 + 8006432: 6078 str r0, [r7, #4] + 8006434: 6039 str r1, [r7, #0] + /* USER CODE BEGIN 6 */ + USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]); + 8006436: 6879 ldr r1, [r7, #4] + 8006438: 4805 ldr r0, [pc, #20] ; (8006450 ) + 800643a: f7fe fe54 bl 80050e6 + USBD_CDC_ReceivePacket(&hUsbDeviceFS); + 800643e: 4804 ldr r0, [pc, #16] ; (8006450 ) + 8006440: f7fe fe93 bl 800516a + return (USBD_OK); + 8006444: 2300 movs r3, #0 + /* USER CODE END 6 */ +} + 8006446: 4618 mov r0, r3 + 8006448: 3708 adds r7, #8 + 800644a: 46bd mov sp, r7 + 800644c: bd80 pop {r7, pc} + 800644e: bf00 nop + 8006450: 200003c0 .word 0x200003c0 + +08006454 : + * @param Buf: Buffer of data to be sent + * @param Len: Number of data to be sent (in bytes) + * @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY + */ +uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len) +{ + 8006454: b580 push {r7, lr} + 8006456: b084 sub sp, #16 + 8006458: af00 add r7, sp, #0 + 800645a: 6078 str r0, [r7, #4] + 800645c: 460b mov r3, r1 + 800645e: 807b strh r3, [r7, #2] + uint8_t result = USBD_OK; + 8006460: 2300 movs r3, #0 + 8006462: 73fb strb r3, [r7, #15] + /* USER CODE BEGIN 7 */ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData; + 8006464: 4b0d ldr r3, [pc, #52] ; (800649c ) + 8006466: f8d3 32b8 ldr.w r3, [r3, #696] ; 0x2b8 + 800646a: 60bb str r3, [r7, #8] + if (hcdc->TxState != 0){ + 800646c: 68bb ldr r3, [r7, #8] + 800646e: f8d3 3214 ldr.w r3, [r3, #532] ; 0x214 + 8006472: 2b00 cmp r3, #0 + 8006474: d001 beq.n 800647a + return USBD_BUSY; + 8006476: 2301 movs r3, #1 + 8006478: e00b b.n 8006492 + } + USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len); + 800647a: 887b ldrh r3, [r7, #2] + 800647c: 461a mov r2, r3 + 800647e: 6879 ldr r1, [r7, #4] + 8006480: 4806 ldr r0, [pc, #24] ; (800649c ) + 8006482: f7fe fe17 bl 80050b4 + result = USBD_CDC_TransmitPacket(&hUsbDeviceFS); + 8006486: 4805 ldr r0, [pc, #20] ; (800649c ) + 8006488: f7fe fe40 bl 800510c + 800648c: 4603 mov r3, r0 + 800648e: 73fb strb r3, [r7, #15] + /* USER CODE END 7 */ + return result; + 8006490: 7bfb ldrb r3, [r7, #15] +} + 8006492: 4618 mov r0, r3 + 8006494: 3710 adds r7, #16 + 8006496: 46bd mov sp, r7 + 8006498: bd80 pop {r7, pc} + 800649a: bf00 nop + 800649c: 200003c0 .word 0x200003c0 + +080064a0 : + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + 80064a0: b480 push {r7} + 80064a2: b083 sub sp, #12 + 80064a4: af00 add r7, sp, #0 + 80064a6: 4603 mov r3, r0 + 80064a8: 6039 str r1, [r7, #0] + 80064aa: 71fb strb r3, [r7, #7] + UNUSED(speed); + *length = sizeof(USBD_FS_DeviceDesc); + 80064ac: 683b ldr r3, [r7, #0] + 80064ae: 2212 movs r2, #18 + 80064b0: 801a strh r2, [r3, #0] + return USBD_FS_DeviceDesc; + 80064b2: 4b03 ldr r3, [pc, #12] ; (80064c0 ) +} + 80064b4: 4618 mov r0, r3 + 80064b6: 370c adds r7, #12 + 80064b8: 46bd mov sp, r7 + 80064ba: bc80 pop {r7} + 80064bc: 4770 bx lr + 80064be: bf00 nop + 80064c0: 20000148 .word 0x20000148 + +080064c4 : + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + 80064c4: b480 push {r7} + 80064c6: b083 sub sp, #12 + 80064c8: af00 add r7, sp, #0 + 80064ca: 4603 mov r3, r0 + 80064cc: 6039 str r1, [r7, #0] + 80064ce: 71fb strb r3, [r7, #7] + UNUSED(speed); + *length = sizeof(USBD_LangIDDesc); + 80064d0: 683b ldr r3, [r7, #0] + 80064d2: 2204 movs r2, #4 + 80064d4: 801a strh r2, [r3, #0] + return USBD_LangIDDesc; + 80064d6: 4b03 ldr r3, [pc, #12] ; (80064e4 ) +} + 80064d8: 4618 mov r0, r3 + 80064da: 370c adds r7, #12 + 80064dc: 46bd mov sp, r7 + 80064de: bc80 pop {r7} + 80064e0: 4770 bx lr + 80064e2: bf00 nop + 80064e4: 2000015c .word 0x2000015c + +080064e8 : + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + 80064e8: b580 push {r7, lr} + 80064ea: b082 sub sp, #8 + 80064ec: af00 add r7, sp, #0 + 80064ee: 4603 mov r3, r0 + 80064f0: 6039 str r1, [r7, #0] + 80064f2: 71fb strb r3, [r7, #7] + if(speed == 0) + 80064f4: 79fb ldrb r3, [r7, #7] + 80064f6: 2b00 cmp r3, #0 + 80064f8: d105 bne.n 8006506 + { + USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + 80064fa: 683a ldr r2, [r7, #0] + 80064fc: 4907 ldr r1, [pc, #28] ; (800651c ) + 80064fe: 4808 ldr r0, [pc, #32] ; (8006520 ) + 8006500: f7ff fe0d bl 800611e + 8006504: e004 b.n 8006510 + } + else + { + USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + 8006506: 683a ldr r2, [r7, #0] + 8006508: 4904 ldr r1, [pc, #16] ; (800651c ) + 800650a: 4805 ldr r0, [pc, #20] ; (8006520 ) + 800650c: f7ff fe07 bl 800611e + } + return USBD_StrDesc; + 8006510: 4b02 ldr r3, [pc, #8] ; (800651c ) +} + 8006512: 4618 mov r0, r3 + 8006514: 3708 adds r7, #8 + 8006516: 46bd mov sp, r7 + 8006518: bd80 pop {r7, pc} + 800651a: bf00 nop + 800651c: 20000e54 .word 0x20000e54 + 8006520: 08006cac .word 0x08006cac + +08006524 : + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + 8006524: b580 push {r7, lr} + 8006526: b082 sub sp, #8 + 8006528: af00 add r7, sp, #0 + 800652a: 4603 mov r3, r0 + 800652c: 6039 str r1, [r7, #0] + 800652e: 71fb strb r3, [r7, #7] + UNUSED(speed); + USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length); + 8006530: 683a ldr r2, [r7, #0] + 8006532: 4904 ldr r1, [pc, #16] ; (8006544 ) + 8006534: 4804 ldr r0, [pc, #16] ; (8006548 ) + 8006536: f7ff fdf2 bl 800611e + return USBD_StrDesc; + 800653a: 4b02 ldr r3, [pc, #8] ; (8006544 ) +} + 800653c: 4618 mov r0, r3 + 800653e: 3708 adds r7, #8 + 8006540: 46bd mov sp, r7 + 8006542: bd80 pop {r7, pc} + 8006544: 20000e54 .word 0x20000e54 + 8006548: 08006cc4 .word 0x08006cc4 + +0800654c : + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + 800654c: b580 push {r7, lr} + 800654e: b082 sub sp, #8 + 8006550: af00 add r7, sp, #0 + 8006552: 4603 mov r3, r0 + 8006554: 6039 str r1, [r7, #0] + 8006556: 71fb strb r3, [r7, #7] + UNUSED(speed); + *length = USB_SIZ_STRING_SERIAL; + 8006558: 683b ldr r3, [r7, #0] + 800655a: 221a movs r2, #26 + 800655c: 801a strh r2, [r3, #0] + + /* Update the serial number string descriptor with the data from the unique + * ID */ + Get_SerialNum(); + 800655e: f000 f843 bl 80065e8 + /* USER CODE BEGIN USBD_FS_SerialStrDescriptor */ + + /* USER CODE END USBD_FS_SerialStrDescriptor */ + return (uint8_t *) USBD_StringSerial; + 8006562: 4b02 ldr r3, [pc, #8] ; (800656c ) +} + 8006564: 4618 mov r0, r3 + 8006566: 3708 adds r7, #8 + 8006568: 46bd mov sp, r7 + 800656a: bd80 pop {r7, pc} + 800656c: 20000160 .word 0x20000160 + +08006570 : + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + 8006570: b580 push {r7, lr} + 8006572: b082 sub sp, #8 + 8006574: af00 add r7, sp, #0 + 8006576: 4603 mov r3, r0 + 8006578: 6039 str r1, [r7, #0] + 800657a: 71fb strb r3, [r7, #7] + if(speed == USBD_SPEED_HIGH) + 800657c: 79fb ldrb r3, [r7, #7] + 800657e: 2b00 cmp r3, #0 + 8006580: d105 bne.n 800658e + { + USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + 8006582: 683a ldr r2, [r7, #0] + 8006584: 4907 ldr r1, [pc, #28] ; (80065a4 ) + 8006586: 4808 ldr r0, [pc, #32] ; (80065a8 ) + 8006588: f7ff fdc9 bl 800611e + 800658c: e004 b.n 8006598 + } + else + { + USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + 800658e: 683a ldr r2, [r7, #0] + 8006590: 4904 ldr r1, [pc, #16] ; (80065a4 ) + 8006592: 4805 ldr r0, [pc, #20] ; (80065a8 ) + 8006594: f7ff fdc3 bl 800611e + } + return USBD_StrDesc; + 8006598: 4b02 ldr r3, [pc, #8] ; (80065a4 ) +} + 800659a: 4618 mov r0, r3 + 800659c: 3708 adds r7, #8 + 800659e: 46bd mov sp, r7 + 80065a0: bd80 pop {r7, pc} + 80065a2: bf00 nop + 80065a4: 20000e54 .word 0x20000e54 + 80065a8: 08006cd8 .word 0x08006cd8 + +080065ac : + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + 80065ac: b580 push {r7, lr} + 80065ae: b082 sub sp, #8 + 80065b0: af00 add r7, sp, #0 + 80065b2: 4603 mov r3, r0 + 80065b4: 6039 str r1, [r7, #0] + 80065b6: 71fb strb r3, [r7, #7] + if(speed == 0) + 80065b8: 79fb ldrb r3, [r7, #7] + 80065ba: 2b00 cmp r3, #0 + 80065bc: d105 bne.n 80065ca + { + USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + 80065be: 683a ldr r2, [r7, #0] + 80065c0: 4907 ldr r1, [pc, #28] ; (80065e0 ) + 80065c2: 4808 ldr r0, [pc, #32] ; (80065e4 ) + 80065c4: f7ff fdab bl 800611e + 80065c8: e004 b.n 80065d4 + } + else + { + USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + 80065ca: 683a ldr r2, [r7, #0] + 80065cc: 4904 ldr r1, [pc, #16] ; (80065e0 ) + 80065ce: 4805 ldr r0, [pc, #20] ; (80065e4 ) + 80065d0: f7ff fda5 bl 800611e + } + return USBD_StrDesc; + 80065d4: 4b02 ldr r3, [pc, #8] ; (80065e0 ) +} + 80065d6: 4618 mov r0, r3 + 80065d8: 3708 adds r7, #8 + 80065da: 46bd mov sp, r7 + 80065dc: bd80 pop {r7, pc} + 80065de: bf00 nop + 80065e0: 20000e54 .word 0x20000e54 + 80065e4: 08006ce4 .word 0x08006ce4 + +080065e8 : + * @brief Create the serial number string descriptor + * @param None + * @retval None + */ +static void Get_SerialNum(void) +{ + 80065e8: b580 push {r7, lr} + 80065ea: b084 sub sp, #16 + 80065ec: af00 add r7, sp, #0 + uint32_t deviceserial0, deviceserial1, deviceserial2; + + deviceserial0 = *(uint32_t *) DEVICE_ID1; + 80065ee: 4b0f ldr r3, [pc, #60] ; (800662c ) + 80065f0: 681b ldr r3, [r3, #0] + 80065f2: 60fb str r3, [r7, #12] + deviceserial1 = *(uint32_t *) DEVICE_ID2; + 80065f4: 4b0e ldr r3, [pc, #56] ; (8006630 ) + 80065f6: 681b ldr r3, [r3, #0] + 80065f8: 60bb str r3, [r7, #8] + deviceserial2 = *(uint32_t *) DEVICE_ID3; + 80065fa: 4b0e ldr r3, [pc, #56] ; (8006634 ) + 80065fc: 681b ldr r3, [r3, #0] + 80065fe: 607b str r3, [r7, #4] + + deviceserial0 += deviceserial2; + 8006600: 68fa ldr r2, [r7, #12] + 8006602: 687b ldr r3, [r7, #4] + 8006604: 4413 add r3, r2 + 8006606: 60fb str r3, [r7, #12] + + if (deviceserial0 != 0) + 8006608: 68fb ldr r3, [r7, #12] + 800660a: 2b00 cmp r3, #0 + 800660c: d009 beq.n 8006622 + { + IntToUnicode(deviceserial0, &USBD_StringSerial[2], 8); + 800660e: 2208 movs r2, #8 + 8006610: 4909 ldr r1, [pc, #36] ; (8006638 ) + 8006612: 68f8 ldr r0, [r7, #12] + 8006614: f000 f814 bl 8006640 + IntToUnicode(deviceserial1, &USBD_StringSerial[18], 4); + 8006618: 2204 movs r2, #4 + 800661a: 4908 ldr r1, [pc, #32] ; (800663c ) + 800661c: 68b8 ldr r0, [r7, #8] + 800661e: f000 f80f bl 8006640 + } +} + 8006622: bf00 nop + 8006624: 3710 adds r7, #16 + 8006626: 46bd mov sp, r7 + 8006628: bd80 pop {r7, pc} + 800662a: bf00 nop + 800662c: 1ffff7e8 .word 0x1ffff7e8 + 8006630: 1ffff7ec .word 0x1ffff7ec + 8006634: 1ffff7f0 .word 0x1ffff7f0 + 8006638: 20000162 .word 0x20000162 + 800663c: 20000172 .word 0x20000172 + +08006640 : + * @param pbuf: pointer to the buffer + * @param len: buffer length + * @retval None + */ +static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len) +{ + 8006640: b480 push {r7} + 8006642: b087 sub sp, #28 + 8006644: af00 add r7, sp, #0 + 8006646: 60f8 str r0, [r7, #12] + 8006648: 60b9 str r1, [r7, #8] + 800664a: 4613 mov r3, r2 + 800664c: 71fb strb r3, [r7, #7] + uint8_t idx = 0; + 800664e: 2300 movs r3, #0 + 8006650: 75fb strb r3, [r7, #23] + + for (idx = 0; idx < len; idx++) + 8006652: 2300 movs r3, #0 + 8006654: 75fb strb r3, [r7, #23] + 8006656: e027 b.n 80066a8 + { + if (((value >> 28)) < 0xA) + 8006658: 68fb ldr r3, [r7, #12] + 800665a: 0f1b lsrs r3, r3, #28 + 800665c: 2b09 cmp r3, #9 + 800665e: d80b bhi.n 8006678 + { + pbuf[2 * idx] = (value >> 28) + '0'; + 8006660: 68fb ldr r3, [r7, #12] + 8006662: 0f1b lsrs r3, r3, #28 + 8006664: b2da uxtb r2, r3 + 8006666: 7dfb ldrb r3, [r7, #23] + 8006668: 005b lsls r3, r3, #1 + 800666a: 4619 mov r1, r3 + 800666c: 68bb ldr r3, [r7, #8] + 800666e: 440b add r3, r1 + 8006670: 3230 adds r2, #48 ; 0x30 + 8006672: b2d2 uxtb r2, r2 + 8006674: 701a strb r2, [r3, #0] + 8006676: e00a b.n 800668e + } + else + { + pbuf[2 * idx] = (value >> 28) + 'A' - 10; + 8006678: 68fb ldr r3, [r7, #12] + 800667a: 0f1b lsrs r3, r3, #28 + 800667c: b2da uxtb r2, r3 + 800667e: 7dfb ldrb r3, [r7, #23] + 8006680: 005b lsls r3, r3, #1 + 8006682: 4619 mov r1, r3 + 8006684: 68bb ldr r3, [r7, #8] + 8006686: 440b add r3, r1 + 8006688: 3237 adds r2, #55 ; 0x37 + 800668a: b2d2 uxtb r2, r2 + 800668c: 701a strb r2, [r3, #0] + } + + value = value << 4; + 800668e: 68fb ldr r3, [r7, #12] + 8006690: 011b lsls r3, r3, #4 + 8006692: 60fb str r3, [r7, #12] + + pbuf[2 * idx + 1] = 0; + 8006694: 7dfb ldrb r3, [r7, #23] + 8006696: 005b lsls r3, r3, #1 + 8006698: 3301 adds r3, #1 + 800669a: 68ba ldr r2, [r7, #8] + 800669c: 4413 add r3, r2 + 800669e: 2200 movs r2, #0 + 80066a0: 701a strb r2, [r3, #0] + for (idx = 0; idx < len; idx++) + 80066a2: 7dfb ldrb r3, [r7, #23] + 80066a4: 3301 adds r3, #1 + 80066a6: 75fb strb r3, [r7, #23] + 80066a8: 7dfa ldrb r2, [r7, #23] + 80066aa: 79fb ldrb r3, [r7, #7] + 80066ac: 429a cmp r2, r3 + 80066ae: d3d3 bcc.n 8006658 + } +} + 80066b0: bf00 nop + 80066b2: 371c adds r7, #28 + 80066b4: 46bd mov sp, r7 + 80066b6: bc80 pop {r7} + 80066b8: 4770 bx lr + ... + +080066bc : + LL Driver Callbacks (PCD -> USB Device Library) +*******************************************************************************/ +/* MSP Init */ + +void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) +{ + 80066bc: b580 push {r7, lr} + 80066be: b084 sub sp, #16 + 80066c0: af00 add r7, sp, #0 + 80066c2: 6078 str r0, [r7, #4] + if(pcdHandle->Instance==USB) + 80066c4: 687b ldr r3, [r7, #4] + 80066c6: 681b ldr r3, [r3, #0] + 80066c8: 4a11 ldr r2, [pc, #68] ; (8006710 ) + 80066ca: 4293 cmp r3, r2 + 80066cc: d11b bne.n 8006706 + { + /* USER CODE BEGIN USB_MspInit 0 */ + + /* USER CODE END USB_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USB_CLK_ENABLE(); + 80066ce: 4b11 ldr r3, [pc, #68] ; (8006714 ) + 80066d0: 69db ldr r3, [r3, #28] + 80066d2: 4a10 ldr r2, [pc, #64] ; (8006714 ) + 80066d4: f443 0300 orr.w r3, r3, #8388608 ; 0x800000 + 80066d8: 61d3 str r3, [r2, #28] + 80066da: 4b0e ldr r3, [pc, #56] ; (8006714 ) + 80066dc: 69db ldr r3, [r3, #28] + 80066de: f403 0300 and.w r3, r3, #8388608 ; 0x800000 + 80066e2: 60fb str r3, [r7, #12] + 80066e4: 68fb ldr r3, [r7, #12] + + /* Peripheral interrupt init */ + HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0); + 80066e6: 2200 movs r2, #0 + 80066e8: 2100 movs r1, #0 + 80066ea: 2013 movs r0, #19 + 80066ec: f7fa f815 bl 800071a + HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn); + 80066f0: 2013 movs r0, #19 + 80066f2: f7fa f82e bl 8000752 + HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0); + 80066f6: 2200 movs r2, #0 + 80066f8: 2100 movs r1, #0 + 80066fa: 2014 movs r0, #20 + 80066fc: f7fa f80d bl 800071a + HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn); + 8006700: 2014 movs r0, #20 + 8006702: f7fa f826 bl 8000752 + /* USER CODE BEGIN USB_MspInit 1 */ + + /* USER CODE END USB_MspInit 1 */ + } +} + 8006706: bf00 nop + 8006708: 3710 adds r7, #16 + 800670a: 46bd mov sp, r7 + 800670c: bd80 pop {r7, pc} + 800670e: bf00 nop + 8006710: 40005c00 .word 0x40005c00 + 8006714: 40021000 .word 0x40021000 + +08006718 : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 8006718: b580 push {r7, lr} + 800671a: b082 sub sp, #8 + 800671c: af00 add r7, sp, #0 + 800671e: 6078 str r0, [r7, #4] + USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); + 8006720: 687b ldr r3, [r7, #4] + 8006722: f8d3 22e8 ldr.w r2, [r3, #744] ; 0x2e8 + 8006726: 687b ldr r3, [r7, #4] + 8006728: f503 732c add.w r3, r3, #688 ; 0x2b0 + 800672c: 4619 mov r1, r3 + 800672e: 4610 mov r0, r2 + 8006730: f7fe fdd1 bl 80052d6 +} + 8006734: bf00 nop + 8006736: 3708 adds r7, #8 + 8006738: 46bd mov sp, r7 + 800673a: bd80 pop {r7, pc} + +0800673c : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#else +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 800673c: b580 push {r7, lr} + 800673e: b082 sub sp, #8 + 8006740: af00 add r7, sp, #0 + 8006742: 6078 str r0, [r7, #4] + 8006744: 460b mov r3, r1 + 8006746: 70fb strb r3, [r7, #3] + USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); + 8006748: 687b ldr r3, [r7, #4] + 800674a: f8d3 02e8 ldr.w r0, [r3, #744] ; 0x2e8 + 800674e: 78fa ldrb r2, [r7, #3] + 8006750: 6879 ldr r1, [r7, #4] + 8006752: 4613 mov r3, r2 + 8006754: 009b lsls r3, r3, #2 + 8006756: 4413 add r3, r2 + 8006758: 00db lsls r3, r3, #3 + 800675a: 440b add r3, r1 + 800675c: f503 73be add.w r3, r3, #380 ; 0x17c + 8006760: 681a ldr r2, [r3, #0] + 8006762: 78fb ldrb r3, [r7, #3] + 8006764: 4619 mov r1, r3 + 8006766: f7fe fe01 bl 800536c +} + 800676a: bf00 nop + 800676c: 3708 adds r7, #8 + 800676e: 46bd mov sp, r7 + 8006770: bd80 pop {r7, pc} + +08006772 : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#else +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 8006772: b580 push {r7, lr} + 8006774: b082 sub sp, #8 + 8006776: af00 add r7, sp, #0 + 8006778: 6078 str r0, [r7, #4] + 800677a: 460b mov r3, r1 + 800677c: 70fb strb r3, [r7, #3] + USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); + 800677e: 687b ldr r3, [r7, #4] + 8006780: f8d3 02e8 ldr.w r0, [r3, #744] ; 0x2e8 + 8006784: 78fa ldrb r2, [r7, #3] + 8006786: 6879 ldr r1, [r7, #4] + 8006788: 4613 mov r3, r2 + 800678a: 009b lsls r3, r3, #2 + 800678c: 4413 add r3, r2 + 800678e: 00db lsls r3, r3, #3 + 8006790: 440b add r3, r1 + 8006792: 333c adds r3, #60 ; 0x3c + 8006794: 681a ldr r2, [r3, #0] + 8006796: 78fb ldrb r3, [r7, #3] + 8006798: 4619 mov r1, r3 + 800679a: f7fe fe58 bl 800544e +} + 800679e: bf00 nop + 80067a0: 3708 adds r7, #8 + 80067a2: 46bd mov sp, r7 + 80067a4: bd80 pop {r7, pc} + +080067a6 : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 80067a6: b580 push {r7, lr} + 80067a8: b082 sub sp, #8 + 80067aa: af00 add r7, sp, #0 + 80067ac: 6078 str r0, [r7, #4] + USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); + 80067ae: 687b ldr r3, [r7, #4] + 80067b0: f8d3 32e8 ldr.w r3, [r3, #744] ; 0x2e8 + 80067b4: 4618 mov r0, r3 + 80067b6: f7fe ff68 bl 800568a +} + 80067ba: bf00 nop + 80067bc: 3708 adds r7, #8 + 80067be: 46bd mov sp, r7 + 80067c0: bd80 pop {r7, pc} + +080067c2 : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 80067c2: b580 push {r7, lr} + 80067c4: b084 sub sp, #16 + 80067c6: af00 add r7, sp, #0 + 80067c8: 6078 str r0, [r7, #4] + USBD_SpeedTypeDef speed = USBD_SPEED_FULL; + 80067ca: 2301 movs r3, #1 + 80067cc: 73fb strb r3, [r7, #15] + + if ( hpcd->Init.speed != PCD_SPEED_FULL) + 80067ce: 687b ldr r3, [r7, #4] + 80067d0: 689b ldr r3, [r3, #8] + 80067d2: 2b02 cmp r3, #2 + 80067d4: d001 beq.n 80067da + { + Error_Handler(); + 80067d6: f7f9 fda7 bl 8000328 + } + /* Set Speed. */ + USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed); + 80067da: 687b ldr r3, [r7, #4] + 80067dc: f8d3 32e8 ldr.w r3, [r3, #744] ; 0x2e8 + 80067e0: 7bfa ldrb r2, [r7, #15] + 80067e2: 4611 mov r1, r2 + 80067e4: 4618 mov r0, r3 + 80067e6: f7fe ff18 bl 800561a + + /* Reset Device. */ + USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); + 80067ea: 687b ldr r3, [r7, #4] + 80067ec: f8d3 32e8 ldr.w r3, [r3, #744] ; 0x2e8 + 80067f0: 4618 mov r0, r3 + 80067f2: f7fe fed1 bl 8005598 +} + 80067f6: bf00 nop + 80067f8: 3710 adds r7, #16 + 80067fa: 46bd mov sp, r7 + 80067fc: bd80 pop {r7, pc} + ... + +08006800 : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 8006800: b580 push {r7, lr} + 8006802: b082 sub sp, #8 + 8006804: af00 add r7, sp, #0 + 8006806: 6078 str r0, [r7, #4] + /* Inform USB library that core enters in suspend Mode. */ + USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData); + 8006808: 687b ldr r3, [r7, #4] + 800680a: f8d3 32e8 ldr.w r3, [r3, #744] ; 0x2e8 + 800680e: 4618 mov r0, r3 + 8006810: f7fe ff12 bl 8005638 + /* Enter in STOP mode. */ + /* USER CODE BEGIN 2 */ + if (hpcd->Init.low_power_enable) + 8006814: 687b ldr r3, [r7, #4] + 8006816: 699b ldr r3, [r3, #24] + 8006818: 2b00 cmp r3, #0 + 800681a: d005 beq.n 8006828 + { + /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */ + SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk)); + 800681c: 4b04 ldr r3, [pc, #16] ; (8006830 ) + 800681e: 691b ldr r3, [r3, #16] + 8006820: 4a03 ldr r2, [pc, #12] ; (8006830 ) + 8006822: f043 0306 orr.w r3, r3, #6 + 8006826: 6113 str r3, [r2, #16] + } + /* USER CODE END 2 */ +} + 8006828: bf00 nop + 800682a: 3708 adds r7, #8 + 800682c: 46bd mov sp, r7 + 800682e: bd80 pop {r7, pc} + 8006830: e000ed00 .word 0xe000ed00 + +08006834 : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 8006834: b580 push {r7, lr} + 8006836: b082 sub sp, #8 + 8006838: af00 add r7, sp, #0 + 800683a: 6078 str r0, [r7, #4] + /* USER CODE BEGIN 3 */ + + /* USER CODE END 3 */ + USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData); + 800683c: 687b ldr r3, [r7, #4] + 800683e: f8d3 32e8 ldr.w r3, [r3, #744] ; 0x2e8 + 8006842: 4618 mov r0, r3 + 8006844: f7fe ff0c bl 8005660 +} + 8006848: bf00 nop + 800684a: 3708 adds r7, #8 + 800684c: 46bd mov sp, r7 + 800684e: bd80 pop {r7, pc} + +08006850 : + * @brief Initializes the low level portion of the device driver. + * @param pdev: Device handle + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev) +{ + 8006850: b580 push {r7, lr} + 8006852: b082 sub sp, #8 + 8006854: af00 add r7, sp, #0 + 8006856: 6078 str r0, [r7, #4] + /* Init USB Ip. */ + /* Link the driver to the stack. */ + hpcd_USB_FS.pData = pdev; + 8006858: 4a28 ldr r2, [pc, #160] ; (80068fc ) + 800685a: 687b ldr r3, [r7, #4] + 800685c: f8c2 32e8 str.w r3, [r2, #744] ; 0x2e8 + pdev->pData = &hpcd_USB_FS; + 8006860: 687b ldr r3, [r7, #4] + 8006862: 4a26 ldr r2, [pc, #152] ; (80068fc ) + 8006864: f8c3 22c0 str.w r2, [r3, #704] ; 0x2c0 + + hpcd_USB_FS.Instance = USB; + 8006868: 4b24 ldr r3, [pc, #144] ; (80068fc ) + 800686a: 4a25 ldr r2, [pc, #148] ; (8006900 ) + 800686c: 601a str r2, [r3, #0] + hpcd_USB_FS.Init.dev_endpoints = 8; + 800686e: 4b23 ldr r3, [pc, #140] ; (80068fc ) + 8006870: 2208 movs r2, #8 + 8006872: 605a str r2, [r3, #4] + hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; + 8006874: 4b21 ldr r3, [pc, #132] ; (80068fc ) + 8006876: 2202 movs r2, #2 + 8006878: 609a str r2, [r3, #8] + hpcd_USB_FS.Init.low_power_enable = DISABLE; + 800687a: 4b20 ldr r3, [pc, #128] ; (80068fc ) + 800687c: 2200 movs r2, #0 + 800687e: 619a str r2, [r3, #24] + hpcd_USB_FS.Init.lpm_enable = DISABLE; + 8006880: 4b1e ldr r3, [pc, #120] ; (80068fc ) + 8006882: 2200 movs r2, #0 + 8006884: 61da str r2, [r3, #28] + hpcd_USB_FS.Init.battery_charging_enable = DISABLE; + 8006886: 4b1d ldr r3, [pc, #116] ; (80068fc ) + 8006888: 2200 movs r2, #0 + 800688a: 621a str r2, [r3, #32] + if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) + 800688c: 481b ldr r0, [pc, #108] ; (80068fc ) + 800688e: f7fa f8ed bl 8000a6c + 8006892: 4603 mov r3, r0 + 8006894: 2b00 cmp r3, #0 + 8006896: d001 beq.n 800689c + { + Error_Handler( ); + 8006898: f7f9 fd46 bl 8000328 + HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_FS, PCD_DataInStageCallback); + HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_FS, PCD_ISOOUTIncompleteCallback); + HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_FS, PCD_ISOINIncompleteCallback); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + /* USER CODE BEGIN EndPoint_Configuration */ + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); + 800689c: 687b ldr r3, [r7, #4] + 800689e: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 80068a2: 2318 movs r3, #24 + 80068a4: 2200 movs r2, #0 + 80068a6: 2100 movs r1, #0 + 80068a8: f7fb fc21 bl 80020ee + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); + 80068ac: 687b ldr r3, [r7, #4] + 80068ae: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 80068b2: 2358 movs r3, #88 ; 0x58 + 80068b4: 2200 movs r2, #0 + 80068b6: 2180 movs r1, #128 ; 0x80 + 80068b8: f7fb fc19 bl 80020ee + /* USER CODE END EndPoint_Configuration */ + /* USER CODE BEGIN EndPoint_Configuration_CDC */ + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0); + 80068bc: 687b ldr r3, [r7, #4] + 80068be: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 80068c2: 23c0 movs r3, #192 ; 0xc0 + 80068c4: 2200 movs r2, #0 + 80068c6: 2181 movs r1, #129 ; 0x81 + 80068c8: f7fb fc11 bl 80020ee + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110); + 80068cc: 687b ldr r3, [r7, #4] + 80068ce: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 80068d2: f44f 7388 mov.w r3, #272 ; 0x110 + 80068d6: 2200 movs r2, #0 + 80068d8: 2101 movs r1, #1 + 80068da: f7fb fc08 bl 80020ee + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100); + 80068de: 687b ldr r3, [r7, #4] + 80068e0: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 80068e4: f44f 7380 mov.w r3, #256 ; 0x100 + 80068e8: 2200 movs r2, #0 + 80068ea: 2182 movs r1, #130 ; 0x82 + 80068ec: f7fb fbff bl 80020ee + /* USER CODE END EndPoint_Configuration_CDC */ + return USBD_OK; + 80068f0: 2300 movs r3, #0 +} + 80068f2: 4618 mov r0, r3 + 80068f4: 3708 adds r7, #8 + 80068f6: 46bd mov sp, r7 + 80068f8: bd80 pop {r7, pc} + 80068fa: bf00 nop + 80068fc: 20001054 .word 0x20001054 + 8006900: 40005c00 .word 0x40005c00 + +08006904 : + * @brief Starts the low level portion of the device driver. + * @param pdev: Device handle + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) +{ + 8006904: b580 push {r7, lr} + 8006906: b084 sub sp, #16 + 8006908: af00 add r7, sp, #0 + 800690a: 6078 str r0, [r7, #4] + HAL_StatusTypeDef hal_status = HAL_OK; + 800690c: 2300 movs r3, #0 + 800690e: 73fb strb r3, [r7, #15] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006910: 2300 movs r3, #0 + 8006912: 73bb strb r3, [r7, #14] + + hal_status = HAL_PCD_Start(pdev->pData); + 8006914: 687b ldr r3, [r7, #4] + 8006916: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 800691a: 4618 mov r0, r3 + 800691c: f7fa f9b1 bl 8000c82 + 8006920: 4603 mov r3, r0 + 8006922: 73fb strb r3, [r7, #15] + + usb_status = USBD_Get_USB_Status(hal_status); + 8006924: 7bfb ldrb r3, [r7, #15] + 8006926: 4618 mov r0, r3 + 8006928: f000 f94e bl 8006bc8 + 800692c: 4603 mov r3, r0 + 800692e: 73bb strb r3, [r7, #14] + + return usb_status; + 8006930: 7bbb ldrb r3, [r7, #14] +} + 8006932: 4618 mov r0, r3 + 8006934: 3710 adds r7, #16 + 8006936: 46bd mov sp, r7 + 8006938: bd80 pop {r7, pc} + +0800693a : + * @param ep_type: Endpoint type + * @param ep_mps: Endpoint max packet size + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps) +{ + 800693a: b580 push {r7, lr} + 800693c: b084 sub sp, #16 + 800693e: af00 add r7, sp, #0 + 8006940: 6078 str r0, [r7, #4] + 8006942: 4608 mov r0, r1 + 8006944: 4611 mov r1, r2 + 8006946: 461a mov r2, r3 + 8006948: 4603 mov r3, r0 + 800694a: 70fb strb r3, [r7, #3] + 800694c: 460b mov r3, r1 + 800694e: 70bb strb r3, [r7, #2] + 8006950: 4613 mov r3, r2 + 8006952: 803b strh r3, [r7, #0] + HAL_StatusTypeDef hal_status = HAL_OK; + 8006954: 2300 movs r3, #0 + 8006956: 73fb strb r3, [r7, #15] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006958: 2300 movs r3, #0 + 800695a: 73bb strb r3, [r7, #14] + + hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type); + 800695c: 687b ldr r3, [r7, #4] + 800695e: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 8006962: 78bb ldrb r3, [r7, #2] + 8006964: 883a ldrh r2, [r7, #0] + 8006966: 78f9 ldrb r1, [r7, #3] + 8006968: f7fa fb2b bl 8000fc2 + 800696c: 4603 mov r3, r0 + 800696e: 73fb strb r3, [r7, #15] + + usb_status = USBD_Get_USB_Status(hal_status); + 8006970: 7bfb ldrb r3, [r7, #15] + 8006972: 4618 mov r0, r3 + 8006974: f000 f928 bl 8006bc8 + 8006978: 4603 mov r3, r0 + 800697a: 73bb strb r3, [r7, #14] + + return usb_status; + 800697c: 7bbb ldrb r3, [r7, #14] +} + 800697e: 4618 mov r0, r3 + 8006980: 3710 adds r7, #16 + 8006982: 46bd mov sp, r7 + 8006984: bd80 pop {r7, pc} + +08006986 : + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + 8006986: b580 push {r7, lr} + 8006988: b084 sub sp, #16 + 800698a: af00 add r7, sp, #0 + 800698c: 6078 str r0, [r7, #4] + 800698e: 460b mov r3, r1 + 8006990: 70fb strb r3, [r7, #3] + HAL_StatusTypeDef hal_status = HAL_OK; + 8006992: 2300 movs r3, #0 + 8006994: 73fb strb r3, [r7, #15] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006996: 2300 movs r3, #0 + 8006998: 73bb strb r3, [r7, #14] + + hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr); + 800699a: 687b ldr r3, [r7, #4] + 800699c: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 80069a0: 78fa ldrb r2, [r7, #3] + 80069a2: 4611 mov r1, r2 + 80069a4: 4618 mov r0, r3 + 80069a6: f7fa fb72 bl 800108e + 80069aa: 4603 mov r3, r0 + 80069ac: 73fb strb r3, [r7, #15] + + usb_status = USBD_Get_USB_Status(hal_status); + 80069ae: 7bfb ldrb r3, [r7, #15] + 80069b0: 4618 mov r0, r3 + 80069b2: f000 f909 bl 8006bc8 + 80069b6: 4603 mov r3, r0 + 80069b8: 73bb strb r3, [r7, #14] + + return usb_status; + 80069ba: 7bbb ldrb r3, [r7, #14] +} + 80069bc: 4618 mov r0, r3 + 80069be: 3710 adds r7, #16 + 80069c0: 46bd mov sp, r7 + 80069c2: bd80 pop {r7, pc} + +080069c4 : + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + 80069c4: b580 push {r7, lr} + 80069c6: b084 sub sp, #16 + 80069c8: af00 add r7, sp, #0 + 80069ca: 6078 str r0, [r7, #4] + 80069cc: 460b mov r3, r1 + 80069ce: 70fb strb r3, [r7, #3] + HAL_StatusTypeDef hal_status = HAL_OK; + 80069d0: 2300 movs r3, #0 + 80069d2: 73fb strb r3, [r7, #15] + USBD_StatusTypeDef usb_status = USBD_OK; + 80069d4: 2300 movs r3, #0 + 80069d6: 73bb strb r3, [r7, #14] + + hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr); + 80069d8: 687b ldr r3, [r7, #4] + 80069da: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 80069de: 78fa ldrb r2, [r7, #3] + 80069e0: 4611 mov r1, r2 + 80069e2: 4618 mov r0, r3 + 80069e4: f7fa fc32 bl 800124c + 80069e8: 4603 mov r3, r0 + 80069ea: 73fb strb r3, [r7, #15] + + usb_status = USBD_Get_USB_Status(hal_status); + 80069ec: 7bfb ldrb r3, [r7, #15] + 80069ee: 4618 mov r0, r3 + 80069f0: f000 f8ea bl 8006bc8 + 80069f4: 4603 mov r3, r0 + 80069f6: 73bb strb r3, [r7, #14] + + return usb_status; + 80069f8: 7bbb ldrb r3, [r7, #14] +} + 80069fa: 4618 mov r0, r3 + 80069fc: 3710 adds r7, #16 + 80069fe: 46bd mov sp, r7 + 8006a00: bd80 pop {r7, pc} + +08006a02 : + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + 8006a02: b580 push {r7, lr} + 8006a04: b084 sub sp, #16 + 8006a06: af00 add r7, sp, #0 + 8006a08: 6078 str r0, [r7, #4] + 8006a0a: 460b mov r3, r1 + 8006a0c: 70fb strb r3, [r7, #3] + HAL_StatusTypeDef hal_status = HAL_OK; + 8006a0e: 2300 movs r3, #0 + 8006a10: 73fb strb r3, [r7, #15] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006a12: 2300 movs r3, #0 + 8006a14: 73bb strb r3, [r7, #14] + + hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr); + 8006a16: 687b ldr r3, [r7, #4] + 8006a18: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 8006a1c: 78fa ldrb r2, [r7, #3] + 8006a1e: 4611 mov r1, r2 + 8006a20: 4618 mov r0, r3 + 8006a22: f7fa fc73 bl 800130c + 8006a26: 4603 mov r3, r0 + 8006a28: 73fb strb r3, [r7, #15] + + usb_status = USBD_Get_USB_Status(hal_status); + 8006a2a: 7bfb ldrb r3, [r7, #15] + 8006a2c: 4618 mov r0, r3 + 8006a2e: f000 f8cb bl 8006bc8 + 8006a32: 4603 mov r3, r0 + 8006a34: 73bb strb r3, [r7, #14] + + return usb_status; + 8006a36: 7bbb ldrb r3, [r7, #14] +} + 8006a38: 4618 mov r0, r3 + 8006a3a: 3710 adds r7, #16 + 8006a3c: 46bd mov sp, r7 + 8006a3e: bd80 pop {r7, pc} + +08006a40 : + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval Stall (1: Yes, 0: No) + */ +uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + 8006a40: b480 push {r7} + 8006a42: b085 sub sp, #20 + 8006a44: af00 add r7, sp, #0 + 8006a46: 6078 str r0, [r7, #4] + 8006a48: 460b mov r3, r1 + 8006a4a: 70fb strb r3, [r7, #3] + PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData; + 8006a4c: 687b ldr r3, [r7, #4] + 8006a4e: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 8006a52: 60fb str r3, [r7, #12] + + if((ep_addr & 0x80) == 0x80) + 8006a54: f997 3003 ldrsb.w r3, [r7, #3] + 8006a58: 2b00 cmp r3, #0 + 8006a5a: da0c bge.n 8006a76 + { + return hpcd->IN_ep[ep_addr & 0x7F].is_stall; + 8006a5c: 78fb ldrb r3, [r7, #3] + 8006a5e: f003 037f and.w r3, r3, #127 ; 0x7f + 8006a62: 68f9 ldr r1, [r7, #12] + 8006a64: 1c5a adds r2, r3, #1 + 8006a66: 4613 mov r3, r2 + 8006a68: 009b lsls r3, r3, #2 + 8006a6a: 4413 add r3, r2 + 8006a6c: 00db lsls r3, r3, #3 + 8006a6e: 440b add r3, r1 + 8006a70: 3302 adds r3, #2 + 8006a72: 781b ldrb r3, [r3, #0] + 8006a74: e00b b.n 8006a8e + } + else + { + return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; + 8006a76: 78fb ldrb r3, [r7, #3] + 8006a78: f003 027f and.w r2, r3, #127 ; 0x7f + 8006a7c: 68f9 ldr r1, [r7, #12] + 8006a7e: 4613 mov r3, r2 + 8006a80: 009b lsls r3, r3, #2 + 8006a82: 4413 add r3, r2 + 8006a84: 00db lsls r3, r3, #3 + 8006a86: 440b add r3, r1 + 8006a88: f503 73b5 add.w r3, r3, #362 ; 0x16a + 8006a8c: 781b ldrb r3, [r3, #0] + } +} + 8006a8e: 4618 mov r0, r3 + 8006a90: 3714 adds r7, #20 + 8006a92: 46bd mov sp, r7 + 8006a94: bc80 pop {r7} + 8006a96: 4770 bx lr + +08006a98 : + * @param pdev: Device handle + * @param dev_addr: Device address + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr) +{ + 8006a98: b580 push {r7, lr} + 8006a9a: b084 sub sp, #16 + 8006a9c: af00 add r7, sp, #0 + 8006a9e: 6078 str r0, [r7, #4] + 8006aa0: 460b mov r3, r1 + 8006aa2: 70fb strb r3, [r7, #3] + HAL_StatusTypeDef hal_status = HAL_OK; + 8006aa4: 2300 movs r3, #0 + 8006aa6: 73fb strb r3, [r7, #15] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006aa8: 2300 movs r3, #0 + 8006aaa: 73bb strb r3, [r7, #14] + + hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr); + 8006aac: 687b ldr r3, [r7, #4] + 8006aae: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 8006ab2: 78fa ldrb r2, [r7, #3] + 8006ab4: 4611 mov r1, r2 + 8006ab6: 4618 mov r0, r3 + 8006ab8: f7fa fa5e bl 8000f78 + 8006abc: 4603 mov r3, r0 + 8006abe: 73fb strb r3, [r7, #15] + + usb_status = USBD_Get_USB_Status(hal_status); + 8006ac0: 7bfb ldrb r3, [r7, #15] + 8006ac2: 4618 mov r0, r3 + 8006ac4: f000 f880 bl 8006bc8 + 8006ac8: 4603 mov r3, r0 + 8006aca: 73bb strb r3, [r7, #14] + + return usb_status; + 8006acc: 7bbb ldrb r3, [r7, #14] +} + 8006ace: 4618 mov r0, r3 + 8006ad0: 3710 adds r7, #16 + 8006ad2: 46bd mov sp, r7 + 8006ad4: bd80 pop {r7, pc} + +08006ad6 : + * @param pbuf: Pointer to data to be sent + * @param size: Data size + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size) +{ + 8006ad6: b580 push {r7, lr} + 8006ad8: b086 sub sp, #24 + 8006ada: af00 add r7, sp, #0 + 8006adc: 60f8 str r0, [r7, #12] + 8006ade: 607a str r2, [r7, #4] + 8006ae0: 461a mov r2, r3 + 8006ae2: 460b mov r3, r1 + 8006ae4: 72fb strb r3, [r7, #11] + 8006ae6: 4613 mov r3, r2 + 8006ae8: 813b strh r3, [r7, #8] + HAL_StatusTypeDef hal_status = HAL_OK; + 8006aea: 2300 movs r3, #0 + 8006aec: 75fb strb r3, [r7, #23] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006aee: 2300 movs r3, #0 + 8006af0: 75bb strb r3, [r7, #22] + + hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size); + 8006af2: 68fb ldr r3, [r7, #12] + 8006af4: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 8006af8: 893b ldrh r3, [r7, #8] + 8006afa: 7af9 ldrb r1, [r7, #11] + 8006afc: 687a ldr r2, [r7, #4] + 8006afe: f7fa fb62 bl 80011c6 + 8006b02: 4603 mov r3, r0 + 8006b04: 75fb strb r3, [r7, #23] + + usb_status = USBD_Get_USB_Status(hal_status); + 8006b06: 7dfb ldrb r3, [r7, #23] + 8006b08: 4618 mov r0, r3 + 8006b0a: f000 f85d bl 8006bc8 + 8006b0e: 4603 mov r3, r0 + 8006b10: 75bb strb r3, [r7, #22] + + return usb_status; + 8006b12: 7dbb ldrb r3, [r7, #22] +} + 8006b14: 4618 mov r0, r3 + 8006b16: 3718 adds r7, #24 + 8006b18: 46bd mov sp, r7 + 8006b1a: bd80 pop {r7, pc} + +08006b1c : + * @param pbuf: Pointer to data to be received + * @param size: Data size + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size) +{ + 8006b1c: b580 push {r7, lr} + 8006b1e: b086 sub sp, #24 + 8006b20: af00 add r7, sp, #0 + 8006b22: 60f8 str r0, [r7, #12] + 8006b24: 607a str r2, [r7, #4] + 8006b26: 461a mov r2, r3 + 8006b28: 460b mov r3, r1 + 8006b2a: 72fb strb r3, [r7, #11] + 8006b2c: 4613 mov r3, r2 + 8006b2e: 813b strh r3, [r7, #8] + HAL_StatusTypeDef hal_status = HAL_OK; + 8006b30: 2300 movs r3, #0 + 8006b32: 75fb strb r3, [r7, #23] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006b34: 2300 movs r3, #0 + 8006b36: 75bb strb r3, [r7, #22] + + hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size); + 8006b38: 68fb ldr r3, [r7, #12] + 8006b3a: f8d3 02c0 ldr.w r0, [r3, #704] ; 0x2c0 + 8006b3e: 893b ldrh r3, [r7, #8] + 8006b40: 7af9 ldrb r1, [r7, #11] + 8006b42: 687a ldr r2, [r7, #4] + 8006b44: f7fa faeb bl 800111e + 8006b48: 4603 mov r3, r0 + 8006b4a: 75fb strb r3, [r7, #23] + + usb_status = USBD_Get_USB_Status(hal_status); + 8006b4c: 7dfb ldrb r3, [r7, #23] + 8006b4e: 4618 mov r0, r3 + 8006b50: f000 f83a bl 8006bc8 + 8006b54: 4603 mov r3, r0 + 8006b56: 75bb strb r3, [r7, #22] + + return usb_status; + 8006b58: 7dbb ldrb r3, [r7, #22] +} + 8006b5a: 4618 mov r0, r3 + 8006b5c: 3718 adds r7, #24 + 8006b5e: 46bd mov sp, r7 + 8006b60: bd80 pop {r7, pc} + +08006b62 : + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval Recived Data Size + */ +uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + 8006b62: b580 push {r7, lr} + 8006b64: b082 sub sp, #8 + 8006b66: af00 add r7, sp, #0 + 8006b68: 6078 str r0, [r7, #4] + 8006b6a: 460b mov r3, r1 + 8006b6c: 70fb strb r3, [r7, #3] + return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr); + 8006b6e: 687b ldr r3, [r7, #4] + 8006b70: f8d3 32c0 ldr.w r3, [r3, #704] ; 0x2c0 + 8006b74: 78fa ldrb r2, [r7, #3] + 8006b76: 4611 mov r1, r2 + 8006b78: 4618 mov r0, r3 + 8006b7a: f7fa fb0d bl 8001198 + 8006b7e: 4603 mov r3, r0 +} + 8006b80: 4618 mov r0, r3 + 8006b82: 3708 adds r7, #8 + 8006b84: 46bd mov sp, r7 + 8006b86: bd80 pop {r7, pc} + +08006b88 : + * @brief Static single allocation. + * @param size: Size of allocated memory + * @retval None + */ +void *USBD_static_malloc(uint32_t size) +{ + 8006b88: b480 push {r7} + 8006b8a: b083 sub sp, #12 + 8006b8c: af00 add r7, sp, #0 + 8006b8e: 6078 str r0, [r7, #4] + static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */ + return mem; + 8006b90: 4b02 ldr r3, [pc, #8] ; (8006b9c ) +} + 8006b92: 4618 mov r0, r3 + 8006b94: 370c adds r7, #12 + 8006b96: 46bd mov sp, r7 + 8006b98: bc80 pop {r7} + 8006b9a: 4770 bx lr + 8006b9c: 2000019c .word 0x2000019c + +08006ba0 : + * @brief Dummy memory free + * @param p: Pointer to allocated memory address + * @retval None + */ +void USBD_static_free(void *p) +{ + 8006ba0: b480 push {r7} + 8006ba2: b083 sub sp, #12 + 8006ba4: af00 add r7, sp, #0 + 8006ba6: 6078 str r0, [r7, #4] + +} + 8006ba8: bf00 nop + 8006baa: 370c adds r7, #12 + 8006bac: 46bd mov sp, r7 + 8006bae: bc80 pop {r7} + 8006bb0: 4770 bx lr + +08006bb2 : +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +#else +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + 8006bb2: b480 push {r7} + 8006bb4: b083 sub sp, #12 + 8006bb6: af00 add r7, sp, #0 + 8006bb8: 6078 str r0, [r7, #4] + 8006bba: 460b mov r3, r1 + 8006bbc: 70fb strb r3, [r7, #3] + { + /* Configure High connection state. */ + + } + /* USER CODE END 6 */ +} + 8006bbe: bf00 nop + 8006bc0: 370c adds r7, #12 + 8006bc2: 46bd mov sp, r7 + 8006bc4: bc80 pop {r7} + 8006bc6: 4770 bx lr + +08006bc8 : + * @brief Retuns the USB status depending on the HAL status: + * @param hal_status: HAL status + * @retval USB status + */ +USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status) +{ + 8006bc8: b480 push {r7} + 8006bca: b085 sub sp, #20 + 8006bcc: af00 add r7, sp, #0 + 8006bce: 4603 mov r3, r0 + 8006bd0: 71fb strb r3, [r7, #7] + USBD_StatusTypeDef usb_status = USBD_OK; + 8006bd2: 2300 movs r3, #0 + 8006bd4: 73fb strb r3, [r7, #15] + + switch (hal_status) + 8006bd6: 79fb ldrb r3, [r7, #7] + 8006bd8: 2b03 cmp r3, #3 + 8006bda: d817 bhi.n 8006c0c + 8006bdc: a201 add r2, pc, #4 ; (adr r2, 8006be4 ) + 8006bde: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8006be2: bf00 nop + 8006be4: 08006bf5 .word 0x08006bf5 + 8006be8: 08006bfb .word 0x08006bfb + 8006bec: 08006c01 .word 0x08006c01 + 8006bf0: 08006c07 .word 0x08006c07 + { + case HAL_OK : + usb_status = USBD_OK; + 8006bf4: 2300 movs r3, #0 + 8006bf6: 73fb strb r3, [r7, #15] + break; + 8006bf8: e00b b.n 8006c12 + case HAL_ERROR : + usb_status = USBD_FAIL; + 8006bfa: 2302 movs r3, #2 + 8006bfc: 73fb strb r3, [r7, #15] + break; + 8006bfe: e008 b.n 8006c12 + case HAL_BUSY : + usb_status = USBD_BUSY; + 8006c00: 2301 movs r3, #1 + 8006c02: 73fb strb r3, [r7, #15] + break; + 8006c04: e005 b.n 8006c12 + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + 8006c06: 2302 movs r3, #2 + 8006c08: 73fb strb r3, [r7, #15] + break; + 8006c0a: e002 b.n 8006c12 + default : + usb_status = USBD_FAIL; + 8006c0c: 2302 movs r3, #2 + 8006c0e: 73fb strb r3, [r7, #15] + break; + 8006c10: bf00 nop + } + return usb_status; + 8006c12: 7bfb ldrb r3, [r7, #15] +} + 8006c14: 4618 mov r0, r3 + 8006c16: 3714 adds r7, #20 + 8006c18: 46bd mov sp, r7 + 8006c1a: bc80 pop {r7} + 8006c1c: 4770 bx lr + 8006c1e: bf00 nop + +08006c20 <__libc_init_array>: + 8006c20: b570 push {r4, r5, r6, lr} + 8006c22: 2500 movs r5, #0 + 8006c24: 4e0c ldr r6, [pc, #48] ; (8006c58 <__libc_init_array+0x38>) + 8006c26: 4c0d ldr r4, [pc, #52] ; (8006c5c <__libc_init_array+0x3c>) + 8006c28: 1ba4 subs r4, r4, r6 + 8006c2a: 10a4 asrs r4, r4, #2 + 8006c2c: 42a5 cmp r5, r4 + 8006c2e: d109 bne.n 8006c44 <__libc_init_array+0x24> + 8006c30: f000 f822 bl 8006c78 <_init> + 8006c34: 2500 movs r5, #0 + 8006c36: 4e0a ldr r6, [pc, #40] ; (8006c60 <__libc_init_array+0x40>) + 8006c38: 4c0a ldr r4, [pc, #40] ; (8006c64 <__libc_init_array+0x44>) + 8006c3a: 1ba4 subs r4, r4, r6 + 8006c3c: 10a4 asrs r4, r4, #2 + 8006c3e: 42a5 cmp r5, r4 + 8006c40: d105 bne.n 8006c4e <__libc_init_array+0x2e> + 8006c42: bd70 pop {r4, r5, r6, pc} + 8006c44: f856 3025 ldr.w r3, [r6, r5, lsl #2] + 8006c48: 4798 blx r3 + 8006c4a: 3501 adds r5, #1 + 8006c4c: e7ee b.n 8006c2c <__libc_init_array+0xc> + 8006c4e: f856 3025 ldr.w r3, [r6, r5, lsl #2] + 8006c52: 4798 blx r3 + 8006c54: 3501 adds r5, #1 + 8006c56: e7f2 b.n 8006c3e <__libc_init_array+0x1e> + 8006c58: 08006d04 .word 0x08006d04 + 8006c5c: 08006d04 .word 0x08006d04 + 8006c60: 08006d04 .word 0x08006d04 + 8006c64: 08006d08 .word 0x08006d08 + +08006c68 : + 8006c68: 4603 mov r3, r0 + 8006c6a: 4402 add r2, r0 + 8006c6c: 4293 cmp r3, r2 + 8006c6e: d100 bne.n 8006c72 + 8006c70: 4770 bx lr + 8006c72: f803 1b01 strb.w r1, [r3], #1 + 8006c76: e7f9 b.n 8006c6c + +08006c78 <_init>: + 8006c78: b5f8 push {r3, r4, r5, r6, r7, lr} + 8006c7a: bf00 nop + 8006c7c: bcf8 pop {r3, r4, r5, r6, r7} + 8006c7e: bc08 pop {r3} + 8006c80: 469e mov lr, r3 + 8006c82: 4770 bx lr + +08006c84 <_fini>: + 8006c84: b5f8 push {r3, r4, r5, r6, r7, lr} + 8006c86: bf00 nop + 8006c88: bcf8 pop {r3, r4, r5, r6, r7} + 8006c8a: bc08 pop {r3} + 8006c8c: 469e mov lr, r3 + 8006c8e: 4770 bx lr diff --git a/Maple/Debug/Maple.map b/Maple/Debug/Maple.map new file mode 100644 index 0000000..d3e4fc9 --- /dev/null +++ b/Maple/Debug/Maple.map @@ -0,0 +1,4509 @@ +Archive member included to satisfy reference by file (symbol) + +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-errno.o) + Core/Src/syscalls.o (__errno) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o (exit) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) (_global_impure_ptr) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-init.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o (__libc_init_array) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-memset.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o (memset) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-strlen.o) + Core/Src/main.o (strlen) + +Allocating common symbols +Common symbol size file + +hUsbDeviceFS 0x2c4 USB_DEVICE/App/usb_device.o +uwTick 0x4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o +pFlash 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o +UserRxBufferFS 0x3e8 USB_DEVICE/App/usbd_cdc_if.o +UserTxBufferFS 0x3e8 USB_DEVICE/App/usbd_cdc_if.o +hpcd_USB_FS 0x2ec USB_DEVICE/Target/usbd_conf.o +USBD_StrDesc 0x200 USB_DEVICE/App/usbd_desc.o + +Discarded input sections + + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crti.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crti.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crti.o + .data 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + .text 0x0000000000000000 0x74 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o + .ARM.extab 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o + .ARM.exidx 0x0000000000000000 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o + .ARM.attributes + 0x0000000000000000 0x1b /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .text 0x0000000000000000 0x0 Core/Src/main.o + .data 0x0000000000000000 0x0 Core/Src/main.o + .bss 0x0000000000000000 0x0 Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_hal_msp.o + .text 0x0000000000000000 0x0 Core/Src/stm32f1xx_hal_msp.o + .data 0x0000000000000000 0x0 Core/Src/stm32f1xx_hal_msp.o + .bss 0x0000000000000000 0x0 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0xa5a Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x215 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x2e Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x8e Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x51 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0xef Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x6a Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1df Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0xc3 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0xd23 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0xe097 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x43 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x3468 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x174 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x5c Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x5be Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x289 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1cb Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x114 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1b2 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x27 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x136 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1bc Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x34 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x3c Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x57 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x88 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x241 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x141 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x65 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x249 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x83 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f1xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f1xx_it.o + .text 0x0000000000000000 0x0 Core/Src/stm32f1xx_it.o + .data 0x0000000000000000 0x0 Core/Src/stm32f1xx_it.o + .bss 0x0000000000000000 0x0 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0xa5a Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x215 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x2e Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x8e Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x51 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0xef Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x6a Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x1df Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0xc3 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0xd23 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0xe097 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x43 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x3468 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x174 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x5c Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x5be Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x289 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x1cb Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x114 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x1b2 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x27 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x136 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x1bc Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x34 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x3c Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x57 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x88 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x241 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x141 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x65 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x249 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x83 Core/Src/stm32f1xx_it.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f1xx_it.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .text 0x0000000000000000 0x0 Core/Src/syscalls.o + .data 0x0000000000000000 0x0 Core/Src/syscalls.o + .bss 0x0000000000000000 0x0 Core/Src/syscalls.o + .bss.__env 0x0000000000000000 0x4 Core/Src/syscalls.o + .data.environ 0x0000000000000000 0x4 Core/Src/syscalls.o + .text.initialise_monitor_handles + 0x0000000000000000 0xc Core/Src/syscalls.o + .text._getpid 0x0000000000000000 0xe Core/Src/syscalls.o + .text._kill 0x0000000000000000 0x20 Core/Src/syscalls.o + .text._exit 0x0000000000000000 0x14 Core/Src/syscalls.o + .text._read 0x0000000000000000 0x3a Core/Src/syscalls.o + .text._write 0x0000000000000000 0x38 Core/Src/syscalls.o + .text._close 0x0000000000000000 0x16 Core/Src/syscalls.o + .text._fstat 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._isatty 0x0000000000000000 0x14 Core/Src/syscalls.o + .text._lseek 0x0000000000000000 0x18 Core/Src/syscalls.o + .text._open 0x0000000000000000 0x1a Core/Src/syscalls.o + .text._wait 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._unlink 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._times 0x0000000000000000 0x16 Core/Src/syscalls.o + .text._stat 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._link 0x0000000000000000 0x20 Core/Src/syscalls.o + .text._fork 0x0000000000000000 0x16 Core/Src/syscalls.o + .text._execve 0x0000000000000000 0x22 Core/Src/syscalls.o + .debug_info 0x0000000000000000 0xebd Core/Src/syscalls.o + .debug_abbrev 0x0000000000000000 0x261 Core/Src/syscalls.o + .debug_aranges + 0x0000000000000000 0xa8 Core/Src/syscalls.o + .debug_ranges 0x0000000000000000 0x98 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x243 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0xa5a Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x22 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x18 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x94 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x3c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x34 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x57 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x174 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x330 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x52 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1f Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x43 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x20 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1a3 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x35 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x6a Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x52 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0xd7 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x3d Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x35 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x122 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x29 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x241 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x145 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x189 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x88 Core/Src/syscalls.o + .debug_line 0x0000000000000000 0x711 Core/Src/syscalls.o + .debug_str 0x0000000000000000 0x886b Core/Src/syscalls.o + .comment 0x0000000000000000 0x7c Core/Src/syscalls.o + .debug_frame 0x0000000000000000 0x2ac Core/Src/syscalls.o + .ARM.attributes + 0x0000000000000000 0x33 Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .text 0x0000000000000000 0x0 Core/Src/sysmem.o + .data 0x0000000000000000 0x0 Core/Src/sysmem.o + .bss 0x0000000000000000 0x0 Core/Src/sysmem.o + .bss.__sbrk_heap_end + 0x0000000000000000 0x4 Core/Src/sysmem.o + .text._sbrk 0x0000000000000000 0x6c Core/Src/sysmem.o + .debug_info 0x0000000000000000 0x985 Core/Src/sysmem.o + .debug_abbrev 0x0000000000000000 0x19b Core/Src/sysmem.o + .debug_aranges + 0x0000000000000000 0x20 Core/Src/sysmem.o + .debug_ranges 0x0000000000000000 0x10 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xee Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xa5a Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x10 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x22 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x40 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x18 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x94 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x3c Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x34 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x174 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x57 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x52 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1f Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x43 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x20 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1a3 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x23b Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xef Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x6a Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1df Core/Src/sysmem.o + .debug_line 0x0000000000000000 0x49a Core/Src/sysmem.o + .debug_str 0x0000000000000000 0x5f39 Core/Src/sysmem.o + .comment 0x0000000000000000 0x7c Core/Src/sysmem.o + .debug_frame 0x0000000000000000 0x34 Core/Src/sysmem.o + .ARM.attributes + 0x0000000000000000 0x33 Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f1xx.o + .text 0x0000000000000000 0x0 Core/Src/system_stm32f1xx.o + .data 0x0000000000000000 0x0 Core/Src/system_stm32f1xx.o + .bss 0x0000000000000000 0x0 Core/Src/system_stm32f1xx.o + .rodata.APBPrescTable + 0x0000000000000000 0x8 Core/Src/system_stm32f1xx.o + .text.SystemCoreClockUpdate + 0x0000000000000000 0xd8 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0xa5a Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x2e Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x8e Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x51 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0xef Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x6a Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x1df Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x1c Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0xc3 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0xd23 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0xe097 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x43 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x215 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x3468 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x174 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x5c Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x5be Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x289 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x1cb Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x114 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x1b2 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x27 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x136 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x1bc Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x34 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x3c Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x57 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x88 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x241 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x141 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x65 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x249 Core/Src/system_stm32f1xx.o + .debug_macro 0x0000000000000000 0x83 Core/Src/system_stm32f1xx.o + .text 0x0000000000000000 0x14 Core/Startup/startup_stm32f103cbux.o + .data 0x0000000000000000 0x0 Core/Startup/startup_stm32f103cbux.o + .bss 0x0000000000000000 0x0 Core/Startup/startup_stm32f103cbux.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_DeInit + 0x0000000000000000 0x30 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_MspInit + 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_MspDeInit + 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetTickPrio + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_SetTickFreq + 0x0000000000000000 0x50 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetTickFreq + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_SuspendTick + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_ResumeTick + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetHalVersion + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetREVID + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetDEVID + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetUIDw0 + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetUIDw1 + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_GetUIDw2 + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_DBGMCU_EnableDBGSleepMode + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_DBGMCU_DisableDBGSleepMode + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_DBGMCU_EnableDBGStopMode + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_DBGMCU_DisableDBGStopMode + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_DBGMCU_EnableDBGStandbyMode + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .text.HAL_DBGMCU_DisableDBGStandbyMode + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_DisableIRQ + 0x0000000000000000 0x44 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_GetPendingIRQ + 0x0000000000000000 0x40 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_SetPendingIRQ + 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_ClearPendingIRQ + 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_GetActive + 0x0000000000000000 0x40 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_GetPriority + 0x0000000000000000 0x4c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.NVIC_DecodePriority + 0x0000000000000000 0x6c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_SystemReset + 0x0000000000000000 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_DisableIRQ + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_SystemReset + 0x0000000000000000 0x8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_GetPriorityGrouping + 0x0000000000000000 0xe Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_GetPriority + 0x0000000000000000 0x2c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_SetPendingIRQ + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_GetPendingIRQ + 0x0000000000000000 0x1e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_ClearPendingIRQ + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_GetActive + 0x0000000000000000 0x1e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_SYSTICK_CLKSourceConfig + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_SYSTICK_IRQHandler + 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_SYSTICK_Callback + 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_Init + 0x0000000000000000 0xb4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_DeInit + 0x0000000000000000 0xb8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_Start + 0x0000000000000000 0x84 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_Start_IT + 0x0000000000000000 0xbe Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_Abort + 0x0000000000000000 0x74 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_Abort_IT + 0x0000000000000000 0xec Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_PollForTransfer + 0x0000000000000000 0x30c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_IRQHandler + 0x0000000000000000 0x20c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_RegisterCallback + 0x0000000000000000 0x90 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_UnRegisterCallback + 0x0000000000000000 0xac Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_GetState + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.HAL_DMA_GetError + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .text.DMA_SetConfig + 0x0000000000000000 0x5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_info 0x0000000000000000 0x7b1 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_abbrev 0x0000000000000000 0x1fe Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_aranges + 0x0000000000000000 0x80 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_ranges 0x0000000000000000 0x70 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_line 0x0000000000000000 0xa91 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_str 0x0000000000000000 0x7d3ef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .debug_frame 0x0000000000000000 0x208 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_SetConfigLine + 0x0000000000000000 0x14c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_GetConfigLine + 0x0000000000000000 0x104 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_ClearConfigLine + 0x0000000000000000 0xc0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_RegisterCallback + 0x0000000000000000 0x32 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_GetHandle + 0x0000000000000000 0x26 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_IRQHandler + 0x0000000000000000 0x48 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_GetPending + 0x0000000000000000 0x40 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_ClearPending + 0x0000000000000000 0x30 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .text.HAL_EXTI_GenerateSWI + 0x0000000000000000 0x2c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_info 0x0000000000000000 0x5d9 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_abbrev 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_aranges + 0x0000000000000000 0x60 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_ranges 0x0000000000000000 0x50 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_line 0x0000000000000000 0x74e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_str 0x0000000000000000 0x7d1d4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .debug_frame 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_Program + 0x0000000000000000 0xe0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_Program_IT + 0x0000000000000000 0x90 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_IRQHandler + 0x0000000000000000 0x1cc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_EndOfOperationCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_OperationErrorCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_Unlock + 0x0000000000000000 0x4c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_Lock + 0x0000000000000000 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_OB_Unlock + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_OB_Lock + 0x0000000000000000 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_OB_Launch + 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.HAL_FLASH_GetError + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.FLASH_Program_HalfWord + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.FLASH_WaitForLastOperation + 0x0000000000000000 0x8c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .text.FLASH_SetErrorCode + 0x0000000000000000 0xa0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_info 0x0000000000000000 0x5a4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_abbrev 0x0000000000000000 0x210 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_aranges + 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_ranges 0x0000000000000000 0x78 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_line 0x0000000000000000 0x847 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_str 0x0000000000000000 0x7d2ea Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .debug_frame 0x0000000000000000 0x214 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + COMMON 0x0000000000000000 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase + 0x0000000000000000 0xd8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase_IT + 0x0000000000000000 0x84 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBErase + 0x0000000000000000 0x84 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBProgram + 0x0000000000000000 0xf8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBGetConfig + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBGetUserData + 0x0000000000000000 0x40 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_MassErase + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_EnableWRP + 0x0000000000000000 0x144 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_DisableWRP + 0x0000000000000000 0x140 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_RDP_LevelConfig + 0x0000000000000000 0xa0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_UserConfig + 0x0000000000000000 0x70 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_ProgramData + 0x0000000000000000 0x68 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_GetWRP + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_GetRDP + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_OB_GetUser + 0x0000000000000000 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .text.FLASH_PageErase + 0x0000000000000000 0x40 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_info 0x0000000000000000 0x827 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_abbrev 0x0000000000000000 0x21b Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_aranges + 0x0000000000000000 0x98 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_ranges 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1ba Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_line 0x0000000000000000 0x896 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_str 0x0000000000000000 0x7d4ae Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .debug_frame 0x0000000000000000 0x258 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .text.HAL_GPIO_DeInit + 0x0000000000000000 0x178 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .text.HAL_GPIO_ReadPin + 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .text.HAL_GPIO_TogglePin + 0x0000000000000000 0x32 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .text.HAL_GPIO_LockPin + 0x0000000000000000 0x4e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .text.HAL_GPIO_EXTI_IRQHandler + 0x0000000000000000 0x30 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .text.HAL_GPIO_EXTI_Callback + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .text.HAL_GPIOEx_ConfigEventout + 0x0000000000000000 0x2c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .text.HAL_GPIOEx_EnableEventout + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .text.HAL_GPIOEx_DisableEventout + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_info 0x0000000000000000 0x22d Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_abbrev 0x0000000000000000 0xfe Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_aranges + 0x0000000000000000 0x30 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_ranges 0x0000000000000000 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_line 0x0000000000000000 0x686 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_str 0x0000000000000000 0x7d055 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .debug_frame 0x0000000000000000 0x78 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_DeInit + 0x0000000000000000 0x46 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_MspInit + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_MspDeInit + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_Stop + 0x0000000000000000 0x4c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_WKUP_IRQHandler + 0x0000000000000000 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_DataOutStageCallback + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_DataInStageCallback + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_SetupStageCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_SOFCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_ResetCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_SuspendCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_ResumeCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_ISOOUTIncompleteCallback + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_ISOINIncompleteCallback + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_ConnectCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_DisconnectCallback + 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_DevConnect + 0x0000000000000000 0x42 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_DevDisconnect + 0x0000000000000000 0x42 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_EP_Flush + 0x0000000000000000 0x5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_ActivateRemoteWakeup + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_DeActivateRemoteWakeup + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_GetState + 0x0000000000000000 0x1a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .text.HAL_PCDEx_SetConnectionState + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .text.HAL_PCDEx_LPM_Callback + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .text.HAL_PCDEx_BCD_Callback + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.PWR_OverloadWfe + 0x0000000000000000 0x10 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_DeInit + 0x0000000000000000 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnableBkUpAccess + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_DisableBkUpAccess + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_ConfigPVD + 0x0000000000000000 0xbc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnablePVD + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_DisablePVD + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnableWakeUpPin + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_DisableWakeUpPin + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnterSLEEPMode + 0x0000000000000000 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnterSTOPMode + 0x0000000000000000 0x64 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnterSTANDBYMode + 0x0000000000000000 0x30 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnableSleepOnExit + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_DisableSleepOnExit + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_EnableSEVOnPend + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_DisableSEVOnPend + 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_PVD_IRQHandler + 0x0000000000000000 0x24 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .text.HAL_PWR_PVDCallback + 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_info 0x0000000000000000 0x6e2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_abbrev 0x0000000000000000 0x1f2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_aranges + 0x0000000000000000 0xa8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_ranges 0x0000000000000000 0x98 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x208 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_line 0x0000000000000000 0x7cf Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_str 0x0000000000000000 0x7d577 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .debug_frame 0x0000000000000000 0x270 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_DeInit + 0x0000000000000000 0x134 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_MCOConfig + 0x0000000000000000 0x70 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_EnableCSS + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_DisableCSS + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_GetHCLKFreq + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_GetPCLK1Freq + 0x0000000000000000 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_GetPCLK2Freq + 0x0000000000000000 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_GetOscConfig + 0x0000000000000000 0x104 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_GetClockConfig + 0x0000000000000000 0x60 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_NMI_IRQHandler + 0x0000000000000000 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCC_CSSCallback + 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKConfig + 0x0000000000000000 0x60 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .rodata 0x0000000000000000 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKFreq + 0x0000000000000000 0x178 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_info 0x0000000000000000 0x169 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1a9 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_line 0x0000000000000000 0x64c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .debug_str 0x0000000000000000 0x7cfb5 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_info 0x0000000000000000 0x169 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_line 0x0000000000000000 0x64f Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .debug_str 0x0000000000000000 0x7cfb8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .ARM.attributes + 0x0000000000000000 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .data 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .bss 0x0000000000000000 0x0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_FlushTxFifo + 0x0000000000000000 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_FlushRxFifo + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_StopDevice + 0x0000000000000000 0x2c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_ReadDevAllOutEpInterrupt + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_ReadDevAllInEpInterrupt + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_ReadDevOutEPInterrupt + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_ReadDevInEPInterrupt + 0x0000000000000000 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_ClearInterrupts + 0x0000000000000000 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_ActivateRemoteWakeup + 0x0000000000000000 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .text.USB_DeActivateRemoteWakeup + 0x0000000000000000 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0xa5a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x215 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0xc3 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0xd23 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0xe097 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x3468 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x5c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x5be Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x289 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x1cb Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x114 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x1b2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x27 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x136 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x1bc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x57 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x241 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x141 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x65 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x249 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x0000000000000000 0x83 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .data 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .bss 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0xa5a Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x18 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x94 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x330 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1f Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1a3 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x6a Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0xd7 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x3d Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x145 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x35 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x29 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x215 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x2e Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0xef Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1df Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0xd23 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0xe097 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x3468 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x5be Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x289 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1cb Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x114 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1b2 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x27 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x136 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1bc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x88 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x241 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x141 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x65 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x249 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x83 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x60 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x1c8 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x0000000000000000 0x8f Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .text 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .data 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .bss 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .text.USBD_DeInit + 0x0000000000000000 0x3a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .text.USBD_Stop + 0x0000000000000000 0x2c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .text.USBD_LL_IsoINIncomplete + 0x0000000000000000 0x18 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .text.USBD_LL_IsoOUTIncomplete + 0x0000000000000000 0x18 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .text.USBD_LL_DevConnected + 0x0000000000000000 0x14 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .text.USBD_LL_DevDisconnected + 0x0000000000000000 0x2e Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0xa5a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x18 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x94 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x97 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x330 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0xfd Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1f Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1a3 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x6a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0xd7 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x3d Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x145 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x35 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x29 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x215 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x2e Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0xef Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1df Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0xbd Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0xd23 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0xe097 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x3468 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x56 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x5be Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x289 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1cb Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x114 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1b2 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x27 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x136 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1bc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x88 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x241 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x141 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x65 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x249 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x83 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000000000 0x60 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .data 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .bss 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0xa5a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x18 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x94 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x97 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x330 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0xfd Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1f Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1a3 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x6a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0xd7 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x3d Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x145 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x35 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x29 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x215 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x2e Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0xef Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1df Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0xbd Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0xd23 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0xe097 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x3468 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x56 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x5be Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x289 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1cb Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x114 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1b2 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x27 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x136 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1bc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x88 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x241 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x141 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x65 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x249 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x83 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x60 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x0000000000000000 0x1c8 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .text 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .data 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .bss 0x0000000000000000 0x0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .text.USBD_GetRxCount + 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0xa5a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x18 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x94 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x97 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x330 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0xfd Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1f Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1a3 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x6a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x52 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x10 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0xd7 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x3d Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x145 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x35 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x29 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x16 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x20 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x215 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x2e Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0xef Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1df Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0xbd Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0xd23 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0xe097 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x43 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x3468 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x56 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x5be Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x289 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1cb Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x114 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1b2 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x27 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x136 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1bc Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x34 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x3c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x57 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x88 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x241 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x141 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x65 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x249 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x83 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x60 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x0000000000000000 0x1c8 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usb_device.o + .text 0x0000000000000000 0x0 USB_DEVICE/App/usb_device.o + .data 0x0000000000000000 0x0 USB_DEVICE/App/usb_device.o + .bss 0x0000000000000000 0x0 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0xa5a USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x2e USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x8e USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x51 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0xef USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x6a USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1df USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0xc3 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0xd23 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0xe097 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x215 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x3468 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x174 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x5c USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x5be USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x289 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1cb USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x114 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1b2 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x27 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x136 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1bc USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x57 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x88 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x241 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x141 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x65 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x249 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x83 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x46 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x18 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x35 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x32a USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1f USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1a3 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0xd7 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x3d USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x145 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x29 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x60 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x1c8 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000000000 0x8f USB_DEVICE/App/usb_device.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_cdc_if.o + .text 0x0000000000000000 0x0 USB_DEVICE/App/usbd_cdc_if.o + .data 0x0000000000000000 0x0 USB_DEVICE/App/usbd_cdc_if.o + .bss 0x0000000000000000 0x0 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0xa5a USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x18 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x94 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x57 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x97 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x330 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0xfd USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1f USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1a3 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x6a USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0xd7 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x3d USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x145 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x35 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x29 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x215 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x2e USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0xef USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1df USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0xbd USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0xd23 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0xe097 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x3468 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x56 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x5be USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x289 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1cb USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x114 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1b2 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x27 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x136 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1bc USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x57 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x88 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x241 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x141 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x65 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x249 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x83 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x60 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x1c8 USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x8f USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usbd_cdc_if.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/App/usbd_desc.o + .text 0x0000000000000000 0x0 USB_DEVICE/App/usbd_desc.o + .data 0x0000000000000000 0x0 USB_DEVICE/App/usbd_desc.o + .bss 0x0000000000000000 0x0 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0xa5a USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x18 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x94 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x57 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x97 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x330 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0xfd USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1f USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1a3 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x6a USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0xd7 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x3d USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x145 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x35 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x29 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x215 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x2e USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0xef USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1df USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0xbd USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0xd23 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0xe097 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x3468 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x56 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x5be USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x289 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1cb USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x114 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1b2 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x27 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x136 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1bc USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x57 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x88 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x241 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x141 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x65 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x249 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x83 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x60 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000000000 0x1ce USB_DEVICE/App/usbd_desc.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .group 0x0000000000000000 0xc USB_DEVICE/Target/usbd_conf.o + .text 0x0000000000000000 0x0 USB_DEVICE/Target/usbd_conf.o + .data 0x0000000000000000 0x0 USB_DEVICE/Target/usbd_conf.o + .bss 0x0000000000000000 0x0 USB_DEVICE/Target/usbd_conf.o + .text.HAL_PCD_MspDeInit + 0x0000000000000000 0x3c USB_DEVICE/Target/usbd_conf.o + .text.HAL_PCD_ISOOUTIncompleteCallback + 0x0000000000000000 0x24 USB_DEVICE/Target/usbd_conf.o + .text.HAL_PCD_ISOINIncompleteCallback + 0x0000000000000000 0x24 USB_DEVICE/Target/usbd_conf.o + .text.HAL_PCD_ConnectCallback + 0x0000000000000000 0x1c USB_DEVICE/Target/usbd_conf.o + .text.HAL_PCD_DisconnectCallback + 0x0000000000000000 0x1c USB_DEVICE/Target/usbd_conf.o + .text.USBD_LL_DeInit + 0x0000000000000000 0x36 USB_DEVICE/Target/usbd_conf.o + .text.USBD_LL_Stop + 0x0000000000000000 0x36 USB_DEVICE/Target/usbd_conf.o + .text.USBD_LL_FlushEP + 0x0000000000000000 0x3e USB_DEVICE/Target/usbd_conf.o + .text.USBD_LL_Delay + 0x0000000000000000 0x16 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0xa5a USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x2e USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x8e USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x51 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0xef USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x6a USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1df USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0xc3 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0xd23 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0xe097 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x215 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x3468 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x174 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x5c USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x5be USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x289 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1cb USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x114 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1b2 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x27 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x136 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1bc USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x57 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x88 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x241 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x141 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x65 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x249 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x83 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x46 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x18 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x3c USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x34 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x35 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x32a USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1f USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x43 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1a3 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x52 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x10 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x40 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0xd7 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1c USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x3d USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x145 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x29 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x16 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x20 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x22 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x60 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x1c8 USB_DEVICE/Target/usbd_conf.o + .debug_macro 0x0000000000000000 0x8f USB_DEVICE/Target/usbd_conf.o + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-errno.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-errno.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-errno.o) + .text.__errno 0x0000000000000000 0xc /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-errno.o) + .debug_frame 0x0000000000000000 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-errno.o) + .ARM.attributes + 0x0000000000000000 0x2d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-errno.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) + .text.exit 0x0000000000000000 0x28 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) + .debug_frame 0x0000000000000000 0x28 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) + .ARM.attributes + 0x0000000000000000 0x2d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-exit.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + .data._impure_ptr + 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + .data.impure_data + 0x0000000000000000 0x60 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + .rodata._global_impure_ptr + 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + .ARM.attributes + 0x0000000000000000 0x2d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-impure.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-init.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-init.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-init.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-memset.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-memset.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-memset.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-strlen.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-strlen.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtend.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtend.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtend.o + .eh_frame 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtend.o + .ARM.attributes + 0x0000000000000000 0x2d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtend.o + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtn.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtn.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtn.o + +Memory Configuration + +Name Origin Length Attributes +RAM 0x0000000020000000 0x0000000000005000 xrw +FLASH 0x0000000008000000 0x0000000000020000 xr +*default* 0x0000000000000000 0xffffffffffffffff + +Linker script and memory map + +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crti.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/crt0.o +LOAD Core/Src/main.o +LOAD Core/Src/stm32f1xx_hal_msp.o +LOAD Core/Src/stm32f1xx_it.o +LOAD Core/Src/syscalls.o +LOAD Core/Src/sysmem.o +LOAD Core/Src/system_stm32f1xx.o +LOAD Core/Startup/startup_stm32f103cbux.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o +LOAD Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o +LOAD Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o +LOAD Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o +LOAD Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o +LOAD Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o +LOAD USB_DEVICE/App/usb_device.o +LOAD USB_DEVICE/App/usbd_cdc_if.o +LOAD USB_DEVICE/App/usbd_desc.o +LOAD USB_DEVICE/Target/usbd_conf.o +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libm.a +END GROUP +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a +END GROUP +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libnosys.a +END GROUP +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libnosys.a +END GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtend.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtn.o + 0x0000000020005000 _estack = (ORIGIN (RAM) + LENGTH (RAM)) + 0x0000000000000200 _Min_Heap_Size = 0x200 + 0x0000000000000400 _Min_Stack_Size = 0x400 + +.isr_vector 0x0000000008000000 0x10c + 0x0000000008000000 . = ALIGN (0x4) + *(.isr_vector) + .isr_vector 0x0000000008000000 0x10c Core/Startup/startup_stm32f103cbux.o + 0x0000000008000000 g_pfnVectors + 0x000000000800010c . = ALIGN (0x4) + +.text 0x000000000800010c 0x6b84 + 0x000000000800010c . = ALIGN (0x4) + *(.text) + .text 0x000000000800010c 0x40 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + .text 0x000000000800014c 0x10 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-strlen.o) + 0x000000000800014c strlen + *(.text*) + .text.main 0x000000000800015c 0x7c Core/Src/main.o + 0x000000000800015c main + .text.SystemClock_Config + 0x00000000080001d8 0xb6 Core/Src/main.o + 0x00000000080001d8 SystemClock_Config + *fill* 0x000000000800028e 0x2 + .text.MX_GPIO_Init + 0x0000000008000290 0x98 Core/Src/main.o + .text.Error_Handler + 0x0000000008000328 0x8 Core/Src/main.o + 0x0000000008000328 Error_Handler + .text.HAL_MspInit + 0x0000000008000330 0x64 Core/Src/stm32f1xx_hal_msp.o + 0x0000000008000330 HAL_MspInit + .text.NMI_Handler + 0x0000000008000394 0x6 Core/Src/stm32f1xx_it.o + 0x0000000008000394 NMI_Handler + .text.HardFault_Handler + 0x000000000800039a 0x6 Core/Src/stm32f1xx_it.o + 0x000000000800039a HardFault_Handler + .text.MemManage_Handler + 0x00000000080003a0 0x6 Core/Src/stm32f1xx_it.o + 0x00000000080003a0 MemManage_Handler + .text.BusFault_Handler + 0x00000000080003a6 0x6 Core/Src/stm32f1xx_it.o + 0x00000000080003a6 BusFault_Handler + .text.UsageFault_Handler + 0x00000000080003ac 0x6 Core/Src/stm32f1xx_it.o + 0x00000000080003ac UsageFault_Handler + .text.SVC_Handler + 0x00000000080003b2 0xc Core/Src/stm32f1xx_it.o + 0x00000000080003b2 SVC_Handler + .text.DebugMon_Handler + 0x00000000080003be 0xc Core/Src/stm32f1xx_it.o + 0x00000000080003be DebugMon_Handler + .text.PendSV_Handler + 0x00000000080003ca 0xc Core/Src/stm32f1xx_it.o + 0x00000000080003ca PendSV_Handler + .text.SysTick_Handler + 0x00000000080003d6 0xc Core/Src/stm32f1xx_it.o + 0x00000000080003d6 SysTick_Handler + *fill* 0x00000000080003e2 0x2 + .text.USB_HP_CAN1_TX_IRQHandler + 0x00000000080003e4 0x14 Core/Src/stm32f1xx_it.o + 0x00000000080003e4 USB_HP_CAN1_TX_IRQHandler + .text.USB_LP_CAN1_RX0_IRQHandler + 0x00000000080003f8 0x14 Core/Src/stm32f1xx_it.o + 0x00000000080003f8 USB_LP_CAN1_RX0_IRQHandler + .text.SystemInit + 0x000000000800040c 0xc Core/Src/system_stm32f1xx.o + 0x000000000800040c SystemInit + .text.Reset_Handler + 0x0000000008000418 0x48 Core/Startup/startup_stm32f103cbux.o + 0x0000000008000418 Reset_Handler + .text.Default_Handler + 0x0000000008000460 0x2 Core/Startup/startup_stm32f103cbux.o + 0x0000000008000460 RTC_Alarm_IRQHandler + 0x0000000008000460 EXTI2_IRQHandler + 0x0000000008000460 TIM1_CC_IRQHandler + 0x0000000008000460 PVD_IRQHandler + 0x0000000008000460 EXTI3_IRQHandler + 0x0000000008000460 EXTI0_IRQHandler + 0x0000000008000460 I2C2_EV_IRQHandler + 0x0000000008000460 ADC1_2_IRQHandler + 0x0000000008000460 SPI1_IRQHandler + 0x0000000008000460 TAMPER_IRQHandler + 0x0000000008000460 DMA1_Channel4_IRQHandler + 0x0000000008000460 USART3_IRQHandler + 0x0000000008000460 RTC_IRQHandler + 0x0000000008000460 DMA1_Channel7_IRQHandler + 0x0000000008000460 CAN1_RX1_IRQHandler + 0x0000000008000460 TIM4_IRQHandler + 0x0000000008000460 I2C1_EV_IRQHandler + 0x0000000008000460 DMA1_Channel6_IRQHandler + 0x0000000008000460 TIM3_IRQHandler + 0x0000000008000460 RCC_IRQHandler + 0x0000000008000460 TIM1_TRG_COM_IRQHandler + 0x0000000008000460 DMA1_Channel1_IRQHandler + 0x0000000008000460 Default_Handler + 0x0000000008000460 EXTI15_10_IRQHandler + 0x0000000008000460 EXTI9_5_IRQHandler + 0x0000000008000460 SPI2_IRQHandler + 0x0000000008000460 DMA1_Channel5_IRQHandler + 0x0000000008000460 EXTI4_IRQHandler + 0x0000000008000460 DMA1_Channel3_IRQHandler + 0x0000000008000460 TIM1_UP_IRQHandler + 0x0000000008000460 WWDG_IRQHandler + 0x0000000008000460 TIM2_IRQHandler + 0x0000000008000460 TIM1_BRK_IRQHandler + 0x0000000008000460 EXTI1_IRQHandler + 0x0000000008000460 USART2_IRQHandler + 0x0000000008000460 I2C2_ER_IRQHandler + 0x0000000008000460 DMA1_Channel2_IRQHandler + 0x0000000008000460 CAN1_SCE_IRQHandler + 0x0000000008000460 FLASH_IRQHandler + 0x0000000008000460 USART1_IRQHandler + 0x0000000008000460 I2C1_ER_IRQHandler + 0x0000000008000460 USBWakeUp_IRQHandler + *fill* 0x0000000008000462 0x2 + .text.HAL_Init + 0x0000000008000464 0x2c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x0000000008000464 HAL_Init + .text.HAL_InitTick + 0x0000000008000490 0x60 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x0000000008000490 HAL_InitTick + .text.HAL_IncTick + 0x00000000080004f0 0x24 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x00000000080004f0 HAL_IncTick + .text.HAL_GetTick + 0x0000000008000514 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x0000000008000514 HAL_GetTick + .text.HAL_Delay + 0x0000000008000528 0x44 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x0000000008000528 HAL_Delay + .text.__NVIC_SetPriorityGrouping + 0x000000000800056c 0x48 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_GetPriorityGrouping + 0x00000000080005b4 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_EnableIRQ + 0x00000000080005d0 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.__NVIC_SetPriority + 0x0000000008000608 0x54 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.NVIC_EncodePriority + 0x000000000800065c 0x64 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.SysTick_Config + 0x00000000080006c0 0x44 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .text.HAL_NVIC_SetPriorityGrouping + 0x0000000008000704 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + 0x0000000008000704 HAL_NVIC_SetPriorityGrouping + .text.HAL_NVIC_SetPriority + 0x000000000800071a 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + 0x000000000800071a HAL_NVIC_SetPriority + .text.HAL_NVIC_EnableIRQ + 0x0000000008000752 0x1c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + 0x0000000008000752 HAL_NVIC_EnableIRQ + .text.HAL_SYSTICK_Config + 0x000000000800076e 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + 0x000000000800076e HAL_SYSTICK_Config + *fill* 0x0000000008000786 0x2 + .text.HAL_GPIO_Init + 0x0000000008000788 0x2b4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + 0x0000000008000788 HAL_GPIO_Init + .text.HAL_GPIO_WritePin + 0x0000000008000a3c 0x30 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + 0x0000000008000a3c HAL_GPIO_WritePin + .text.HAL_PCD_Init + 0x0000000008000a6c 0x216 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x0000000008000a6c HAL_PCD_Init + .text.HAL_PCD_Start + 0x0000000008000c82 0x4c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x0000000008000c82 HAL_PCD_Start + .text.HAL_PCD_IRQHandler + 0x0000000008000cce 0x2aa Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x0000000008000cce HAL_PCD_IRQHandler + .text.HAL_PCD_SetAddress + 0x0000000008000f78 0x4a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x0000000008000f78 HAL_PCD_SetAddress + .text.HAL_PCD_EP_Open + 0x0000000008000fc2 0xcc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x0000000008000fc2 HAL_PCD_EP_Open + .text.HAL_PCD_EP_Close + 0x000000000800108e 0x90 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x000000000800108e HAL_PCD_EP_Close + .text.HAL_PCD_EP_Receive + 0x000000000800111e 0x7a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x000000000800111e HAL_PCD_EP_Receive + .text.HAL_PCD_EP_GetRxCount + 0x0000000008001198 0x2e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x0000000008001198 HAL_PCD_EP_GetRxCount + .text.HAL_PCD_EP_Transmit + 0x00000000080011c6 0x86 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x00000000080011c6 HAL_PCD_EP_Transmit + .text.HAL_PCD_EP_SetStall + 0x000000000800124c 0xc0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x000000000800124c HAL_PCD_EP_SetStall + .text.HAL_PCD_EP_ClrStall + 0x000000000800130c 0xa8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x000000000800130c HAL_PCD_EP_ClrStall + .text.PCD_EP_ISR_Handler + 0x00000000080013b4 0x5e6 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_EP_DB_Receive + 0x000000000800199a 0x21a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCD_EP_DB_Transmit + 0x0000000008001bb4 0x53a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .text.HAL_PCDEx_PMAConfig + 0x00000000080020ee 0x84 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + 0x00000000080020ee HAL_PCDEx_PMAConfig + *fill* 0x0000000008002172 0x2 + .text.HAL_RCC_OscConfig + 0x0000000008002174 0x500 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + 0x0000000008002174 HAL_RCC_OscConfig + .text.HAL_RCC_ClockConfig + 0x0000000008002674 0x1d4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + 0x0000000008002674 HAL_RCC_ClockConfig + .text.HAL_RCC_GetSysClockFreq + 0x0000000008002848 0xc4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + 0x0000000008002848 HAL_RCC_GetSysClockFreq + .text.RCC_Delay + 0x000000000800290c 0x3c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .text.HAL_RCCEx_PeriphCLKConfig + 0x0000000008002948 0x16c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + 0x0000000008002948 HAL_RCCEx_PeriphCLKConfig + .text.USB_CoreInit + 0x0000000008002ab4 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008002ab4 USB_CoreInit + .text.USB_EnableGlobalInt + 0x0000000008002ad4 0x2c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008002ad4 USB_EnableGlobalInt + .text.USB_DisableGlobalInt + 0x0000000008002b00 0x34 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008002b00 USB_DisableGlobalInt + .text.USB_SetCurrentMode + 0x0000000008002b34 0x18 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008002b34 USB_SetCurrentMode + .text.USB_DevInit + 0x0000000008002b4c 0x40 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008002b4c USB_DevInit + .text.USB_ActivateEndpoint + 0x0000000008002b8c 0x6d4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008002b8c USB_ActivateEndpoint + .text.USB_DeactivateEndpoint + 0x0000000008003260 0x3d8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008003260 USB_DeactivateEndpoint + .text.USB_EPStartXfer + 0x0000000008003638 0x1240 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008003638 USB_EPStartXfer + .text.USB_EPSetStall + 0x0000000008004878 0xa0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004878 USB_EPSetStall + .text.USB_EPClearStall + 0x0000000008004918 0x15a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004918 USB_EPClearStall + .text.USB_SetDevAddress + 0x0000000008004a72 0x26 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004a72 USB_SetDevAddress + .text.USB_DevConnect + 0x0000000008004a98 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004a98 USB_DevConnect + .text.USB_DevDisconnect + 0x0000000008004aac 0x14 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004aac USB_DevDisconnect + .text.USB_ReadInterrupts + 0x0000000008004ac0 0x1e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004ac0 USB_ReadInterrupts + .text.USB_EP0_OutStart + 0x0000000008004ade 0x16 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004ade USB_EP0_OutStart + .text.USB_WritePMA + 0x0000000008004af4 0x88 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004af4 USB_WritePMA + .text.USB_ReadPMA + 0x0000000008004b7c 0x9e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x0000000008004b7c USB_ReadPMA + .text.USBD_CDC_Init + 0x0000000008004c1a 0xf4 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_DeInit + 0x0000000008004d0e 0x6e Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_Setup + 0x0000000008004d7c 0x140 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_DataIn + 0x0000000008004ebc 0xa6 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_DataOut + 0x0000000008004f62 0x56 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_EP0_RxReady + 0x0000000008004fb8 0x50 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_GetFSCfgDesc + 0x0000000008005008 0x20 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_GetHSCfgDesc + 0x0000000008005028 0x20 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_GetOtherSpeedCfgDesc + 0x0000000008005048 0x20 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .text.USBD_CDC_GetDeviceQualifierDescriptor + 0x0000000008005068 0x20 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x0000000008005068 USBD_CDC_GetDeviceQualifierDescriptor + .text.USBD_CDC_RegisterInterface + 0x0000000008005088 0x2c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x0000000008005088 USBD_CDC_RegisterInterface + .text.USBD_CDC_SetTxBuffer + 0x00000000080050b4 0x32 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x00000000080050b4 USBD_CDC_SetTxBuffer + .text.USBD_CDC_SetRxBuffer + 0x00000000080050e6 0x26 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x00000000080050e6 USBD_CDC_SetRxBuffer + .text.USBD_CDC_TransmitPacket + 0x000000000800510c 0x5e Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x000000000800510c USBD_CDC_TransmitPacket + .text.USBD_CDC_ReceivePacket + 0x000000000800516a 0x54 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x000000000800516a USBD_CDC_ReceivePacket + .text.USBD_Init + 0x00000000080051be 0x56 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x00000000080051be USBD_Init + .text.USBD_RegisterClass + 0x0000000008005214 0x32 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x0000000008005214 USBD_RegisterClass + .text.USBD_Start + 0x0000000008005246 0x18 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x0000000008005246 USBD_Start + .text.USBD_RunTestMode + 0x000000000800525e 0x14 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x000000000800525e USBD_RunTestMode + .text.USBD_SetClassConfig + 0x0000000008005272 0x3e Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x0000000008005272 USBD_SetClassConfig + .text.USBD_ClrClassConfig + 0x00000000080052b0 0x26 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x00000000080052b0 USBD_ClrClassConfig + .text.USBD_LL_SetupStage + 0x00000000080052d6 0x96 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x00000000080052d6 USBD_LL_SetupStage + .text.USBD_LL_DataOutStage + 0x000000000800536c 0xe2 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x000000000800536c USBD_LL_DataOutStage + .text.USBD_LL_DataInStage + 0x000000000800544e 0x14a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x000000000800544e USBD_LL_DataInStage + .text.USBD_LL_Reset + 0x0000000008005598 0x82 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x0000000008005598 USBD_LL_Reset + .text.USBD_LL_SetSpeed + 0x000000000800561a 0x1e Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x000000000800561a USBD_LL_SetSpeed + .text.USBD_LL_Suspend + 0x0000000008005638 0x28 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x0000000008005638 USBD_LL_Suspend + .text.USBD_LL_Resume + 0x0000000008005660 0x2a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x0000000008005660 USBD_LL_Resume + .text.USBD_LL_SOF + 0x000000000800568a 0x34 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x000000000800568a USBD_LL_SOF + *fill* 0x00000000080056be 0x2 + .text.USBD_StdDevReq + 0x00000000080056c0 0xd4 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + 0x00000000080056c0 USBD_StdDevReq + .text.USBD_StdItfReq + 0x0000000008005794 0x8c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + 0x0000000008005794 USBD_StdItfReq + .text.USBD_StdEPReq + 0x0000000008005820 0x2ba Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + 0x0000000008005820 USBD_StdEPReq + *fill* 0x0000000008005ada 0x2 + .text.USBD_GetDescriptor + 0x0000000008005adc 0x2d0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_SetAddress + 0x0000000008005dac 0x84 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_SetConfig + 0x0000000008005e30 0x11c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_GetConfig + 0x0000000008005f4c 0x68 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_GetStatus + 0x0000000008005fb4 0x66 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_SetFeature + 0x000000000800601a 0x28 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_ClrFeature + 0x0000000008006042 0x42 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_ParseSetupRequest + 0x0000000008006084 0x78 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + 0x0000000008006084 USBD_ParseSetupRequest + .text.USBD_CtlError + 0x00000000080060fc 0x22 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + 0x00000000080060fc USBD_CtlError + .text.USBD_GetString + 0x000000000800611e 0x84 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + 0x000000000800611e USBD_GetString + .text.USBD_GetLen + 0x00000000080061a2 0x2e Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .text.USBD_CtlSendData + 0x00000000080061d0 0x38 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + 0x00000000080061d0 USBD_CtlSendData + .text.USBD_CtlContinueSendData + 0x0000000008006208 0x24 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + 0x0000000008006208 USBD_CtlContinueSendData + .text.USBD_CtlPrepareRx + 0x000000000800622c 0x3c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + 0x000000000800622c USBD_CtlPrepareRx + .text.USBD_CtlContinueRx + 0x0000000008006268 0x24 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + 0x0000000008006268 USBD_CtlContinueRx + .text.USBD_CtlSendStatus + 0x000000000800628c 0x26 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + 0x000000000800628c USBD_CtlSendStatus + .text.USBD_CtlReceiveStatus + 0x00000000080062b2 0x26 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + 0x00000000080062b2 USBD_CtlReceiveStatus + .text.MX_USB_DEVICE_Init + 0x00000000080062d8 0x60 USB_DEVICE/App/usb_device.o + 0x00000000080062d8 MX_USB_DEVICE_Init + .text.CDC_Init_FS + 0x0000000008006338 0x28 USB_DEVICE/App/usbd_cdc_if.o + .text.CDC_DeInit_FS + 0x0000000008006360 0xe USB_DEVICE/App/usbd_cdc_if.o + *fill* 0x000000000800636e 0x2 + .text.CDC_Control_FS + 0x0000000008006370 0xbc USB_DEVICE/App/usbd_cdc_if.o + .text.CDC_Receive_FS + 0x000000000800642c 0x28 USB_DEVICE/App/usbd_cdc_if.o + .text.CDC_Transmit_FS + 0x0000000008006454 0x4c USB_DEVICE/App/usbd_cdc_if.o + 0x0000000008006454 CDC_Transmit_FS + .text.USBD_FS_DeviceDescriptor + 0x00000000080064a0 0x24 USB_DEVICE/App/usbd_desc.o + 0x00000000080064a0 USBD_FS_DeviceDescriptor + .text.USBD_FS_LangIDStrDescriptor + 0x00000000080064c4 0x24 USB_DEVICE/App/usbd_desc.o + 0x00000000080064c4 USBD_FS_LangIDStrDescriptor + .text.USBD_FS_ProductStrDescriptor + 0x00000000080064e8 0x3c USB_DEVICE/App/usbd_desc.o + 0x00000000080064e8 USBD_FS_ProductStrDescriptor + .text.USBD_FS_ManufacturerStrDescriptor + 0x0000000008006524 0x28 USB_DEVICE/App/usbd_desc.o + 0x0000000008006524 USBD_FS_ManufacturerStrDescriptor + .text.USBD_FS_SerialStrDescriptor + 0x000000000800654c 0x24 USB_DEVICE/App/usbd_desc.o + 0x000000000800654c USBD_FS_SerialStrDescriptor + .text.USBD_FS_ConfigStrDescriptor + 0x0000000008006570 0x3c USB_DEVICE/App/usbd_desc.o + 0x0000000008006570 USBD_FS_ConfigStrDescriptor + .text.USBD_FS_InterfaceStrDescriptor + 0x00000000080065ac 0x3c USB_DEVICE/App/usbd_desc.o + 0x00000000080065ac USBD_FS_InterfaceStrDescriptor + .text.Get_SerialNum + 0x00000000080065e8 0x58 USB_DEVICE/App/usbd_desc.o + .text.IntToUnicode + 0x0000000008006640 0x7a USB_DEVICE/App/usbd_desc.o + *fill* 0x00000000080066ba 0x2 + .text.HAL_PCD_MspInit + 0x00000000080066bc 0x5c USB_DEVICE/Target/usbd_conf.o + 0x00000000080066bc HAL_PCD_MspInit + .text.HAL_PCD_SetupStageCallback + 0x0000000008006718 0x24 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006718 HAL_PCD_SetupStageCallback + .text.HAL_PCD_DataOutStageCallback + 0x000000000800673c 0x36 USB_DEVICE/Target/usbd_conf.o + 0x000000000800673c HAL_PCD_DataOutStageCallback + .text.HAL_PCD_DataInStageCallback + 0x0000000008006772 0x34 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006772 HAL_PCD_DataInStageCallback + .text.HAL_PCD_SOFCallback + 0x00000000080067a6 0x1c USB_DEVICE/Target/usbd_conf.o + 0x00000000080067a6 HAL_PCD_SOFCallback + .text.HAL_PCD_ResetCallback + 0x00000000080067c2 0x3c USB_DEVICE/Target/usbd_conf.o + 0x00000000080067c2 HAL_PCD_ResetCallback + *fill* 0x00000000080067fe 0x2 + .text.HAL_PCD_SuspendCallback + 0x0000000008006800 0x34 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006800 HAL_PCD_SuspendCallback + .text.HAL_PCD_ResumeCallback + 0x0000000008006834 0x1c USB_DEVICE/Target/usbd_conf.o + 0x0000000008006834 HAL_PCD_ResumeCallback + .text.USBD_LL_Init + 0x0000000008006850 0xb4 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006850 USBD_LL_Init + .text.USBD_LL_Start + 0x0000000008006904 0x36 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006904 USBD_LL_Start + .text.USBD_LL_OpenEP + 0x000000000800693a 0x4c USB_DEVICE/Target/usbd_conf.o + 0x000000000800693a USBD_LL_OpenEP + .text.USBD_LL_CloseEP + 0x0000000008006986 0x3e USB_DEVICE/Target/usbd_conf.o + 0x0000000008006986 USBD_LL_CloseEP + .text.USBD_LL_StallEP + 0x00000000080069c4 0x3e USB_DEVICE/Target/usbd_conf.o + 0x00000000080069c4 USBD_LL_StallEP + .text.USBD_LL_ClearStallEP + 0x0000000008006a02 0x3e USB_DEVICE/Target/usbd_conf.o + 0x0000000008006a02 USBD_LL_ClearStallEP + .text.USBD_LL_IsStallEP + 0x0000000008006a40 0x58 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006a40 USBD_LL_IsStallEP + .text.USBD_LL_SetUSBAddress + 0x0000000008006a98 0x3e USB_DEVICE/Target/usbd_conf.o + 0x0000000008006a98 USBD_LL_SetUSBAddress + .text.USBD_LL_Transmit + 0x0000000008006ad6 0x46 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006ad6 USBD_LL_Transmit + .text.USBD_LL_PrepareReceive + 0x0000000008006b1c 0x46 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006b1c USBD_LL_PrepareReceive + .text.USBD_LL_GetRxDataSize + 0x0000000008006b62 0x26 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006b62 USBD_LL_GetRxDataSize + .text.USBD_static_malloc + 0x0000000008006b88 0x18 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006b88 USBD_static_malloc + .text.USBD_static_free + 0x0000000008006ba0 0x12 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006ba0 USBD_static_free + .text.HAL_PCDEx_SetConnectionState + 0x0000000008006bb2 0x16 USB_DEVICE/Target/usbd_conf.o + 0x0000000008006bb2 HAL_PCDEx_SetConnectionState + .text.USBD_Get_USB_Status + 0x0000000008006bc8 0x58 USB_DEVICE/Target/usbd_conf.o + .text.__libc_init_array + 0x0000000008006c20 0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-init.o) + 0x0000000008006c20 __libc_init_array + .text.memset 0x0000000008006c68 0x10 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-memset.o) + 0x0000000008006c68 memset + *(.glue_7) + .glue_7 0x0000000008006c78 0x0 linker stubs + *(.glue_7t) + .glue_7t 0x0000000008006c78 0x0 linker stubs + *(.eh_frame) + .eh_frame 0x0000000008006c78 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + *(.init) + .init 0x0000000008006c78 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crti.o + 0x0000000008006c78 _init + .init 0x0000000008006c7c 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtn.o + *(.fini) + .fini 0x0000000008006c84 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crti.o + 0x0000000008006c84 _fini + .fini 0x0000000008006c88 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtn.o + 0x0000000008006c90 . = ALIGN (0x4) + 0x0000000008006c90 _etext = . + +.vfp11_veneer 0x0000000008006c90 0x0 + .vfp11_veneer 0x0000000008006c90 0x0 linker stubs + +.v4_bx 0x0000000008006c90 0x0 + .v4_bx 0x0000000008006c90 0x0 linker stubs + +.iplt 0x0000000008006c90 0x0 + .iplt 0x0000000008006c90 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + +.rodata 0x0000000008006c90 0x74 + 0x0000000008006c90 . = ALIGN (0x4) + *(.rodata) + .rodata 0x0000000008006c90 0x7 Core/Src/main.o + *fill* 0x0000000008006c97 0x1 + .rodata 0x0000000008006c98 0x12 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + *fill* 0x0000000008006caa 0x2 + .rodata 0x0000000008006cac 0x46 USB_DEVICE/App/usbd_desc.o + *(.rodata*) + *fill* 0x0000000008006cf2 0x2 + .rodata.AHBPrescTable + 0x0000000008006cf4 0x10 Core/Src/system_stm32f1xx.o + 0x0000000008006cf4 AHBPrescTable + 0x0000000008006d04 . = ALIGN (0x4) + +.rel.dyn 0x0000000008006d04 0x0 + .rel.iplt 0x0000000008006d04 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + +.ARM.extab 0x0000000008006d04 0x0 + 0x0000000008006d04 . = ALIGN (0x4) + *(.ARM.extab* .gnu.linkonce.armextab.*) + 0x0000000008006d04 . = ALIGN (0x4) + +.ARM 0x0000000008006d04 0x0 + 0x0000000008006d04 . = ALIGN (0x4) + 0x0000000008006d04 __exidx_start = . + *(.ARM.exidx*) + 0x0000000008006d04 __exidx_end = . + 0x0000000008006d04 . = ALIGN (0x4) + +.preinit_array 0x0000000008006d04 0x0 + 0x0000000008006d04 . = ALIGN (0x4) + 0x0000000008006d04 PROVIDE (__preinit_array_start = .) + *(.preinit_array*) + 0x0000000008006d04 PROVIDE (__preinit_array_end = .) + 0x0000000008006d04 . = ALIGN (0x4) + +.init_array 0x0000000008006d04 0x4 + 0x0000000008006d04 . = ALIGN (0x4) + 0x0000000008006d04 PROVIDE (__init_array_start = .) + *(SORT_BY_NAME(.init_array.*)) + *(.init_array*) + .init_array 0x0000000008006d04 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + 0x0000000008006d08 PROVIDE (__init_array_end = .) + 0x0000000008006d08 . = ALIGN (0x4) + +.fini_array 0x0000000008006d08 0x4 + 0x0000000008006d08 . = ALIGN (0x4) + [!provide] PROVIDE (__fini_array_start = .) + *(SORT_BY_NAME(.fini_array.*)) + *(.fini_array*) + .fini_array 0x0000000008006d08 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + [!provide] PROVIDE (__fini_array_end = .) + 0x0000000008006d0c . = ALIGN (0x4) + 0x0000000008006d0c _sidata = LOADADDR (.data) + +.data 0x0000000020000000 0x17c load address 0x0000000008006d0c + 0x0000000020000000 . = ALIGN (0x4) + 0x0000000020000000 _sdata = . + *(.data) + *(.data*) + .data.SystemCoreClock + 0x0000000020000000 0x4 Core/Src/system_stm32f1xx.o + 0x0000000020000000 SystemCoreClock + .data.uwTickPrio + 0x0000000020000004 0x4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x0000000020000004 uwTickPrio + .data.uwTickFreq + 0x0000000020000008 0x1 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x0000000020000008 uwTickFreq + *fill* 0x0000000020000009 0x3 + .data.USBD_CDC_DeviceQualifierDesc + 0x000000002000000c 0xa Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + *fill* 0x0000000020000016 0x2 + .data.USBD_CDC + 0x0000000020000018 0x38 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x0000000020000018 USBD_CDC + .data.USBD_CDC_CfgHSDesc + 0x0000000020000050 0x43 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x0000000020000050 USBD_CDC_CfgHSDesc + *fill* 0x0000000020000093 0x1 + .data.USBD_CDC_CfgFSDesc + 0x0000000020000094 0x43 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x0000000020000094 USBD_CDC_CfgFSDesc + *fill* 0x00000000200000d7 0x1 + .data.USBD_CDC_OtherSpeedCfgDesc + 0x00000000200000d8 0x43 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x00000000200000d8 USBD_CDC_OtherSpeedCfgDesc + *fill* 0x000000002000011b 0x1 + .data.USBD_Interface_fops_FS + 0x000000002000011c 0x10 USB_DEVICE/App/usbd_cdc_if.o + 0x000000002000011c USBD_Interface_fops_FS + .data.FS_Desc 0x000000002000012c 0x1c USB_DEVICE/App/usbd_desc.o + 0x000000002000012c FS_Desc + .data.USBD_FS_DeviceDesc + 0x0000000020000148 0x12 USB_DEVICE/App/usbd_desc.o + 0x0000000020000148 USBD_FS_DeviceDesc + *fill* 0x000000002000015a 0x2 + .data.USBD_LangIDDesc + 0x000000002000015c 0x4 USB_DEVICE/App/usbd_desc.o + 0x000000002000015c USBD_LangIDDesc + .data.USBD_StringSerial + 0x0000000020000160 0x1a USB_DEVICE/App/usbd_desc.o + 0x0000000020000160 USBD_StringSerial + *(.RamFunc) + *(.RamFunc*) + 0x000000002000017c . = ALIGN (0x4) + *fill* 0x000000002000017a 0x2 + 0x000000002000017c _edata = . + +.igot.plt 0x000000002000017c 0x0 load address 0x0000000008006e88 + .igot.plt 0x000000002000017c 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + 0x000000002000017c . = ALIGN (0x4) + +.bss 0x000000002000017c 0x11c4 load address 0x0000000008006e88 + 0x000000002000017c _sbss = . + 0x000000002000017c __bss_start__ = _sbss + *(.bss) + .bss 0x000000002000017c 0x1c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + *(.bss*) + .bss.cfgidx.7629 + 0x0000000020000198 0x1 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + *fill* 0x0000000020000199 0x3 + .bss.mem.7697 0x000000002000019c 0x220 USB_DEVICE/Target/usbd_conf.o + *(COMMON) + COMMON 0x00000000200003bc 0x4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x00000000200003bc uwTick + COMMON 0x00000000200003c0 0x2c4 USB_DEVICE/App/usb_device.o + 0x00000000200003c0 hUsbDeviceFS + COMMON 0x0000000020000684 0x7d0 USB_DEVICE/App/usbd_cdc_if.o + 0x0000000020000684 UserRxBufferFS + 0x0000000020000a6c UserTxBufferFS + COMMON 0x0000000020000e54 0x200 USB_DEVICE/App/usbd_desc.o + 0x0000000020000e54 USBD_StrDesc + COMMON 0x0000000020001054 0x2ec USB_DEVICE/Target/usbd_conf.o + 0x0000000020001054 hpcd_USB_FS + 0x0000000020001340 . = ALIGN (0x4) + 0x0000000020001340 _ebss = . + 0x0000000020001340 __bss_end__ = _ebss + +._user_heap_stack + 0x0000000020001340 0x600 load address 0x0000000008006e88 + 0x0000000020001340 . = ALIGN (0x8) + [!provide] PROVIDE (end = .) + 0x0000000020001340 PROVIDE (_end = .) + 0x0000000020001540 . = (. + _Min_Heap_Size) + *fill* 0x0000000020001340 0x200 + 0x0000000020001940 . = (. + _Min_Stack_Size) + *fill* 0x0000000020001540 0x400 + 0x0000000020001940 . = ALIGN (0x8) + +/DISCARD/ + libc.a(*) + libm.a(*) + libgcc.a(*) + +.ARM.attributes + 0x0000000000000000 0x29 + *(.ARM.attributes) + .ARM.attributes + 0x0000000000000000 0x1d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crti.o + .ARM.attributes + 0x000000000000001d 0x2d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtbegin.o + .ARM.attributes + 0x000000000000004a 0x33 Core/Src/main.o + .ARM.attributes + 0x000000000000007d 0x33 Core/Src/stm32f1xx_hal_msp.o + .ARM.attributes + 0x00000000000000b0 0x33 Core/Src/stm32f1xx_it.o + .ARM.attributes + 0x00000000000000e3 0x33 Core/Src/system_stm32f1xx.o + .ARM.attributes + 0x0000000000000116 0x21 Core/Startup/startup_stm32f103cbux.o + .ARM.attributes + 0x0000000000000137 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .ARM.attributes + 0x000000000000016a 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .ARM.attributes + 0x000000000000019d 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .ARM.attributes + 0x00000000000001d0 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .ARM.attributes + 0x0000000000000203 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .ARM.attributes + 0x0000000000000236 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .ARM.attributes + 0x0000000000000269 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .ARM.attributes + 0x000000000000029c 0x33 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .ARM.attributes + 0x00000000000002cf 0x33 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .ARM.attributes + 0x0000000000000302 0x33 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .ARM.attributes + 0x0000000000000335 0x33 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .ARM.attributes + 0x0000000000000368 0x33 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .ARM.attributes + 0x000000000000039b 0x33 USB_DEVICE/App/usb_device.o + .ARM.attributes + 0x00000000000003ce 0x33 USB_DEVICE/App/usbd_cdc_if.o + .ARM.attributes + 0x0000000000000401 0x33 USB_DEVICE/App/usbd_desc.o + .ARM.attributes + 0x0000000000000434 0x33 USB_DEVICE/Target/usbd_conf.o + .ARM.attributes + 0x0000000000000467 0x2d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-init.o) + .ARM.attributes + 0x0000000000000494 0x2d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-memset.o) + .ARM.attributes + 0x00000000000004c1 0x17 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-strlen.o) + .ARM.attributes + 0x00000000000004d8 0x1d /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v7-m/crtn.o +OUTPUT(Maple.elf elf32-littlearm) + +.debug_info 0x0000000000000000 0x108d1 + .debug_info 0x0000000000000000 0x121b Core/Src/main.o + .debug_info 0x000000000000121b 0x2d6 Core/Src/stm32f1xx_hal_msp.o + .debug_info 0x00000000000014f1 0x6b7 Core/Src/stm32f1xx_it.o + .debug_info 0x0000000000001ba8 0x29a Core/Src/system_stm32f1xx.o + .debug_info 0x0000000000001e42 0x22 Core/Startup/startup_stm32f103cbux.o + .debug_info 0x0000000000001e64 0x714 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_info 0x0000000000002578 0xb51 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_info 0x00000000000030c9 0x69b Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_info 0x0000000000003764 0x122f Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_info 0x0000000000004993 0x785 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_info 0x0000000000005118 0x80f Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_info 0x0000000000005927 0x444 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_info 0x0000000000005d6b 0x17e7 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_info 0x0000000000007552 0x17b6 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_info 0x0000000000008d08 0x11d2 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_info 0x0000000000009eda 0x1142 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_info 0x000000000000b01c 0xf33 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_info 0x000000000000bf4f 0xe7b USB_DEVICE/App/usb_device.o + .debug_info 0x000000000000cdca 0x1036 USB_DEVICE/App/usbd_cdc_if.o + .debug_info 0x000000000000de00 0xd17 USB_DEVICE/App/usbd_desc.o + .debug_info 0x000000000000eb17 0x1dba USB_DEVICE/Target/usbd_conf.o + +.debug_abbrev 0x0000000000000000 0x2928 + .debug_abbrev 0x0000000000000000 0x25a Core/Src/main.o + .debug_abbrev 0x000000000000025a 0x109 Core/Src/stm32f1xx_hal_msp.o + .debug_abbrev 0x0000000000000363 0x155 Core/Src/stm32f1xx_it.o + .debug_abbrev 0x00000000000004b8 0x134 Core/Src/system_stm32f1xx.o + .debug_abbrev 0x00000000000005ec 0x12 Core/Startup/startup_stm32f103cbux.o + .debug_abbrev 0x00000000000005fe 0x1c7 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_abbrev 0x00000000000007c5 0x2d5 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_abbrev 0x0000000000000a9a 0x1c0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_abbrev 0x0000000000000c5a 0x268 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_abbrev 0x0000000000000ec2 0x188 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_abbrev 0x000000000000104a 0x243 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_abbrev 0x000000000000128d 0x175 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_abbrev 0x0000000000001402 0x1d2 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_abbrev 0x00000000000015d4 0x2b6 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_abbrev 0x000000000000188a 0x270 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_abbrev 0x0000000000001afa 0x2a0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_abbrev 0x0000000000001d9a 0x1e0 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_abbrev 0x0000000000001f7a 0x1be USB_DEVICE/App/usb_device.o + .debug_abbrev 0x0000000000002138 0x285 USB_DEVICE/App/usbd_cdc_if.o + .debug_abbrev 0x00000000000023bd 0x290 USB_DEVICE/App/usbd_desc.o + .debug_abbrev 0x000000000000264d 0x2db USB_DEVICE/Target/usbd_conf.o + +.debug_aranges 0x0000000000000000 0xa68 + .debug_aranges + 0x0000000000000000 0x38 Core/Src/main.o + .debug_aranges + 0x0000000000000038 0x20 Core/Src/stm32f1xx_hal_msp.o + .debug_aranges + 0x0000000000000058 0x70 Core/Src/stm32f1xx_it.o + .debug_aranges + 0x00000000000000c8 0x28 Core/Src/system_stm32f1xx.o + .debug_aranges + 0x00000000000000f0 0x28 Core/Startup/startup_stm32f103cbux.o + .debug_aranges + 0x0000000000000118 0xe0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_aranges + 0x00000000000001f8 0x100 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_aranges + 0x00000000000002f8 0x58 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_aranges + 0x0000000000000350 0x138 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_aranges + 0x0000000000000488 0x38 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_aranges + 0x00000000000004c0 0x90 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_aranges + 0x0000000000000550 0x30 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_aranges + 0x0000000000000580 0xf0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_aranges + 0x0000000000000670 0x90 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_aranges + 0x0000000000000700 0xb8 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_aranges + 0x00000000000007b8 0x88 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_aranges + 0x0000000000000840 0x50 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_aranges + 0x0000000000000890 0x20 USB_DEVICE/App/usb_device.o + .debug_aranges + 0x00000000000008b0 0x40 USB_DEVICE/App/usbd_cdc_if.o + .debug_aranges + 0x00000000000008f0 0x60 USB_DEVICE/App/usbd_desc.o + .debug_aranges + 0x0000000000000950 0x118 USB_DEVICE/Target/usbd_conf.o + +.debug_ranges 0x0000000000000000 0x920 + .debug_ranges 0x0000000000000000 0x28 Core/Src/main.o + .debug_ranges 0x0000000000000028 0x10 Core/Src/stm32f1xx_hal_msp.o + .debug_ranges 0x0000000000000038 0x60 Core/Src/stm32f1xx_it.o + .debug_ranges 0x0000000000000098 0x18 Core/Src/system_stm32f1xx.o + .debug_ranges 0x00000000000000b0 0x20 Core/Startup/startup_stm32f103cbux.o + .debug_ranges 0x00000000000000d0 0xd0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_ranges 0x00000000000001a0 0xf0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_ranges 0x0000000000000290 0x48 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_ranges 0x00000000000002d8 0x128 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_ranges 0x0000000000000400 0x28 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_ranges 0x0000000000000428 0x80 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_ranges 0x00000000000004a8 0x20 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_ranges 0x00000000000004c8 0xe0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_ranges 0x00000000000005a8 0x80 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_ranges 0x0000000000000628 0xa8 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_ranges 0x00000000000006d0 0x78 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_ranges 0x0000000000000748 0x40 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_ranges 0x0000000000000788 0x10 USB_DEVICE/App/usb_device.o + .debug_ranges 0x0000000000000798 0x30 USB_DEVICE/App/usbd_cdc_if.o + .debug_ranges 0x00000000000007c8 0x50 USB_DEVICE/App/usbd_desc.o + .debug_ranges 0x0000000000000818 0x108 USB_DEVICE/Target/usbd_conf.o + +.debug_macro 0x0000000000000000 0x19605 + .debug_macro 0x0000000000000000 0x3e3 Core/Src/main.o + .debug_macro 0x00000000000003e3 0xa5a Core/Src/main.o + .debug_macro 0x0000000000000e3d 0x215 Core/Src/main.o + .debug_macro 0x0000000000001052 0x2e Core/Src/main.o + .debug_macro 0x0000000000001080 0x22 Core/Src/main.o + .debug_macro 0x00000000000010a2 0x22 Core/Src/main.o + .debug_macro 0x00000000000010c4 0x8e Core/Src/main.o + .debug_macro 0x0000000000001152 0x51 Core/Src/main.o + .debug_macro 0x00000000000011a3 0xef Core/Src/main.o + .debug_macro 0x0000000000001292 0x6a Core/Src/main.o + .debug_macro 0x00000000000012fc 0x1df Core/Src/main.o + .debug_macro 0x00000000000014db 0x1c Core/Src/main.o + .debug_macro 0x00000000000014f7 0x22 Core/Src/main.o + .debug_macro 0x0000000000001519 0xc3 Core/Src/main.o + .debug_macro 0x00000000000015dc 0xd23 Core/Src/main.o + .debug_macro 0x00000000000022ff 0xe097 Core/Src/main.o + .debug_macro 0x0000000000010396 0x43 Core/Src/main.o + .debug_macro 0x00000000000103d9 0x3468 Core/Src/main.o + .debug_macro 0x0000000000013841 0x174 Core/Src/main.o + .debug_macro 0x00000000000139b5 0x5c Core/Src/main.o + .debug_macro 0x0000000000013a11 0x5be Core/Src/main.o + .debug_macro 0x0000000000013fcf 0x289 Core/Src/main.o + .debug_macro 0x0000000000014258 0x1cb Core/Src/main.o + .debug_macro 0x0000000000014423 0x114 Core/Src/main.o + .debug_macro 0x0000000000014537 0x1b2 Core/Src/main.o + .debug_macro 0x00000000000146e9 0x27 Core/Src/main.o + .debug_macro 0x0000000000014710 0x136 Core/Src/main.o + .debug_macro 0x0000000000014846 0x1bc Core/Src/main.o + .debug_macro 0x0000000000014a02 0x34 Core/Src/main.o + .debug_macro 0x0000000000014a36 0x3c Core/Src/main.o + .debug_macro 0x0000000000014a72 0x57 Core/Src/main.o + .debug_macro 0x0000000000014ac9 0x88 Core/Src/main.o + .debug_macro 0x0000000000014b51 0x241 Core/Src/main.o + .debug_macro 0x0000000000014d92 0x141 Core/Src/main.o + .debug_macro 0x0000000000014ed3 0x65 Core/Src/main.o + .debug_macro 0x0000000000014f38 0x249 Core/Src/main.o + .debug_macro 0x0000000000015181 0x83 Core/Src/main.o + .debug_macro 0x0000000000015204 0x1c Core/Src/main.o + .debug_macro 0x0000000000015220 0x46 Core/Src/main.o + .debug_macro 0x0000000000015266 0x18 Core/Src/main.o + .debug_macro 0x000000000001527e 0x3c Core/Src/main.o + .debug_macro 0x00000000000152ba 0x34 Core/Src/main.o + .debug_macro 0x00000000000152ee 0x16 Core/Src/main.o + .debug_macro 0x0000000000015304 0x35 Core/Src/main.o + .debug_macro 0x0000000000015339 0x32a Core/Src/main.o + .debug_macro 0x0000000000015663 0x10 Core/Src/main.o + .debug_macro 0x0000000000015673 0x52 Core/Src/main.o + .debug_macro 0x00000000000156c5 0x1f Core/Src/main.o + .debug_macro 0x00000000000156e4 0x43 Core/Src/main.o + .debug_macro 0x0000000000015727 0x20 Core/Src/main.o + .debug_macro 0x0000000000015747 0x1a3 Core/Src/main.o + .debug_macro 0x00000000000158ea 0x10 Core/Src/main.o + .debug_macro 0x00000000000158fa 0x1c Core/Src/main.o + .debug_macro 0x0000000000015916 0x52 Core/Src/main.o + .debug_macro 0x0000000000015968 0x40 Core/Src/main.o + .debug_macro 0x00000000000159a8 0x10 Core/Src/main.o + .debug_macro 0x00000000000159b8 0x40 Core/Src/main.o + .debug_macro 0x00000000000159f8 0xd7 Core/Src/main.o + .debug_macro 0x0000000000015acf 0x1c Core/Src/main.o + .debug_macro 0x0000000000015aeb 0x3d Core/Src/main.o + .debug_macro 0x0000000000015b28 0x16 Core/Src/main.o + .debug_macro 0x0000000000015b3e 0x145 Core/Src/main.o + .debug_macro 0x0000000000015c83 0x16 Core/Src/main.o + .debug_macro 0x0000000000015c99 0x16 Core/Src/main.o + .debug_macro 0x0000000000015caf 0x29 Core/Src/main.o + .debug_macro 0x0000000000015cd8 0x16 Core/Src/main.o + .debug_macro 0x0000000000015cee 0x20 Core/Src/main.o + .debug_macro 0x0000000000015d0e 0x60 Core/Src/main.o + .debug_macro 0x0000000000015d6e 0x1c8 Core/Src/main.o + .debug_macro 0x0000000000015f36 0x8f Core/Src/main.o + .debug_macro 0x0000000000015fc5 0x10 Core/Src/main.o + .debug_macro 0x0000000000015fd5 0x1b7 Core/Src/stm32f1xx_hal_msp.o + .debug_macro 0x000000000001618c 0x1c1 Core/Src/stm32f1xx_it.o + .debug_macro 0x000000000001634d 0x1a8 Core/Src/system_stm32f1xx.o + .debug_macro 0x00000000000164f5 0x1cc Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_macro 0x00000000000166c1 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_macro 0x0000000000016869 0x213 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_macro 0x0000000000016a7c 0x1b4 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_macro 0x0000000000016c30 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_macro 0x0000000000016dd8 0x1ba Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_macro 0x0000000000016f92 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_macro 0x000000000001713a 0x1a8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_macro 0x00000000000172e2 0x3c4 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x00000000000176a6 0x97 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x000000000001773d 0xfd Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x000000000001783a 0xbd Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x00000000000178f7 0x56 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_macro 0x000000000001794d 0x3ab Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000017cf8 0x1ce Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_macro 0x0000000000017ec6 0x3b5 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_macro 0x000000000001827b 0x3b1 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_macro 0x000000000001862c 0x3e4 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000018a10 0x22 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000018a32 0x22 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000018a54 0x16 USB_DEVICE/App/usb_device.o + .debug_macro 0x0000000000018a6a 0x3cf USB_DEVICE/App/usbd_cdc_if.o + .debug_macro 0x0000000000018e39 0x3e8 USB_DEVICE/App/usbd_desc.o + .debug_macro 0x0000000000019221 0x1c USB_DEVICE/App/usbd_desc.o + .debug_macro 0x000000000001923d 0x3c8 USB_DEVICE/Target/usbd_conf.o + +.debug_line 0x0000000000000000 0xbc20 + .debug_line 0x0000000000000000 0x9fe Core/Src/main.o + .debug_line 0x00000000000009fe 0x652 Core/Src/stm32f1xx_hal_msp.o + .debug_line 0x0000000000001050 0x71d Core/Src/stm32f1xx_it.o + .debug_line 0x000000000000176d 0x679 Core/Src/system_stm32f1xx.o + .debug_line 0x0000000000001de6 0x84 Core/Startup/startup_stm32f103cbux.o + .debug_line 0x0000000000001e6a 0x82c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_line 0x0000000000002696 0x903 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_line 0x0000000000002f99 0x828 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_line 0x00000000000037c1 0xc90 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_line 0x0000000000004451 0x69d Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_line 0x0000000000004aee 0x8ec Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_line 0x00000000000053da 0x70a Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_line 0x0000000000005ae4 0xcc5 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_line 0x00000000000067a9 0xaff Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_line 0x00000000000072a8 0xb3a Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_line 0x0000000000007de2 0xbc3 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_line 0x00000000000089a5 0x9a3 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_line 0x0000000000009348 0x985 USB_DEVICE/App/usb_device.o + .debug_line 0x0000000000009ccd 0x9b8 USB_DEVICE/App/usbd_cdc_if.o + .debug_line 0x000000000000a685 0x9d7 USB_DEVICE/App/usbd_desc.o + .debug_line 0x000000000000b05c 0xbc4 USB_DEVICE/Target/usbd_conf.o + +.debug_str 0x0000000000000000 0x8477d + .debug_str 0x0000000000000000 0x82106 Core/Src/main.o + 0x82595 (size before relaxing) + .debug_str 0x0000000000082106 0x5a Core/Src/stm32f1xx_hal_msp.o + 0x7d077 (size before relaxing) + .debug_str 0x0000000000082160 0x3d9 Core/Src/stm32f1xx_it.o + 0x7d434 (size before relaxing) + .debug_str 0x0000000000082539 0x52 Core/Src/system_stm32f1xx.o + 0x7d014 (size before relaxing) + .debug_str 0x000000000008258b 0x36 Core/Startup/startup_stm32f103cbux.o + 0x69 (size before relaxing) + .debug_str 0x00000000000825c1 0x55e Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + 0x7d6a5 (size before relaxing) + .debug_str 0x0000000000082b1f 0x2d8 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + 0x7d6ad (size before relaxing) + .debug_str 0x0000000000082df7 0x324 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + 0x7d3d8 (size before relaxing) + .debug_str 0x000000000008311b 0x3e5 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + 0x7d767 (size before relaxing) + .debug_str 0x0000000000083500 0x18d Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + 0x7d4b4 (size before relaxing) + .debug_str 0x000000000008368d 0x24f Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + 0x7d411 (size before relaxing) + .debug_str 0x00000000000838dc 0xb9 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + 0x7d19e (size before relaxing) + .debug_str 0x0000000000083995 0x2ad Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + 0x7d4e7 (size before relaxing) + .debug_str 0x0000000000083c42 0x293 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + 0x82870 (size before relaxing) + .debug_str 0x0000000000083ed5 0x1b5 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + 0x8216b (size before relaxing) + .debug_str 0x000000000008408a 0x134 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + 0x820f1 (size before relaxing) + .debug_str 0x00000000000841be 0xc9 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + 0x82079 (size before relaxing) + .debug_str 0x0000000000084287 0xc2 USB_DEVICE/App/usb_device.o + 0x823e0 (size before relaxing) + .debug_str 0x0000000000084349 0x86 USB_DEVICE/App/usbd_cdc_if.o + 0x82418 (size before relaxing) + .debug_str 0x00000000000843cf 0x25a USB_DEVICE/App/usbd_desc.o + 0x81fe6 (size before relaxing) + .debug_str 0x0000000000084629 0x154 USB_DEVICE/Target/usbd_conf.o + 0x82c96 (size before relaxing) + +.comment 0x0000000000000000 0x7b + .comment 0x0000000000000000 0x7b Core/Src/main.o + 0x7c (size before relaxing) + .comment 0x000000000000007b 0x7c Core/Src/stm32f1xx_hal_msp.o + .comment 0x000000000000007b 0x7c Core/Src/stm32f1xx_it.o + .comment 0x000000000000007b 0x7c Core/Src/system_stm32f1xx.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .comment 0x000000000000007b 0x7c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .comment 0x000000000000007b 0x7c Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .comment 0x000000000000007b 0x7c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .comment 0x000000000000007b 0x7c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .comment 0x000000000000007b 0x7c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .comment 0x000000000000007b 0x7c USB_DEVICE/App/usb_device.o + .comment 0x000000000000007b 0x7c USB_DEVICE/App/usbd_cdc_if.o + .comment 0x000000000000007b 0x7c USB_DEVICE/App/usbd_desc.o + .comment 0x000000000000007b 0x7c USB_DEVICE/Target/usbd_conf.o + +.debug_frame 0x0000000000000000 0x27c0 + .debug_frame 0x0000000000000000 0x90 Core/Src/main.o + .debug_frame 0x0000000000000090 0x38 Core/Src/stm32f1xx_hal_msp.o + .debug_frame 0x00000000000000c8 0x13c Core/Src/stm32f1xx_it.o + .debug_frame 0x0000000000000204 0x58 Core/Src/system_stm32f1xx.o + .debug_frame 0x000000000000025c 0x334 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o + .debug_frame 0x0000000000000590 0x428 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o + .debug_frame 0x00000000000009b8 0x14c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o + .debug_frame 0x0000000000000b04 0x578 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o + .debug_frame 0x000000000000107c 0xb0 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o + .debug_frame 0x000000000000112c 0x21c Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o + .debug_frame 0x0000000000001348 0x84 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o + .debug_frame 0x00000000000013cc 0x450 Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o + .debug_frame 0x000000000000181c 0x248 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + .debug_frame 0x0000000000001a64 0x300 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o + .debug_frame 0x0000000000001d64 0x218 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o + .debug_frame 0x0000000000001f7c 0x10c Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + .debug_frame 0x0000000000002088 0x2c USB_DEVICE/App/usb_device.o + .debug_frame 0x00000000000020b4 0xbc USB_DEVICE/App/usbd_cdc_if.o + .debug_frame 0x0000000000002170 0x160 USB_DEVICE/App/usbd_desc.o + .debug_frame 0x00000000000022d0 0x4a4 USB_DEVICE/Target/usbd_conf.o + .debug_frame 0x0000000000002774 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-init.o) + .debug_frame 0x00000000000027a0 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v7-m/libc_nano.a(lib_a-memset.o) diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/subdir.mk b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/subdir.mk new file mode 100644 index 0000000..ca3c6e6 --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/subdir.mk @@ -0,0 +1,19 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c + +OBJS += \ +./Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o + +C_DEPS += \ +./Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.d + + +# Each subdirectory must supply rules for building sources it contributes +Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o: ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.d b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.d new file mode 100644 index 0000000..58c2b6a --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.d @@ -0,0 +1,103 @@ +Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o: \ + ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \ + ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h + +../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o new file mode 100644 index 0000000..37d1b6e Binary files /dev/null and b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o differ diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.su b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.su new file mode 100644 index 0000000..1d53116 --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.su @@ -0,0 +1,15 @@ +usbd_cdc.c:471:17:USBD_CDC_Init 24 static +usbd_cdc.c:549:17:USBD_CDC_DeInit 24 static +usbd_cdc.c:583:17:USBD_CDC_Setup 32 static +usbd_cdc.c:677:17:USBD_CDC_DataIn 24 static +usbd_cdc.c:711:17:USBD_CDC_DataOut 24 static +usbd_cdc.c:738:17:USBD_CDC_EP0_RxReady 24 static +usbd_cdc.c:760:18:USBD_CDC_GetFSCfgDesc 16 static +usbd_cdc.c:773:18:USBD_CDC_GetHSCfgDesc 16 static +usbd_cdc.c:786:18:USBD_CDC_GetOtherSpeedCfgDesc 16 static +usbd_cdc.c:798:11:USBD_CDC_GetDeviceQualifierDescriptor 16 static +usbd_cdc.c:810:10:USBD_CDC_RegisterInterface 24 static +usbd_cdc.c:830:10:USBD_CDC_SetTxBuffer 32 static +usbd_cdc.c:849:10:USBD_CDC_SetRxBuffer 24 static +usbd_cdc.c:865:10:USBD_CDC_TransmitPacket 24 static +usbd_cdc.c:903:10:USBD_CDC_ReceivePacket 24 static diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/subdir.mk b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/subdir.mk new file mode 100644 index 0000000..6131b31 --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/subdir.mk @@ -0,0 +1,29 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \ +../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \ +../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c + +OBJS += \ +./Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o \ +./Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o \ +./Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o + +C_DEPS += \ +./Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.d \ +./Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.d \ +./Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.d + + +# Each subdirectory must supply rules for building sources it contributes +Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o: ../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.d b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.d new file mode 100644 index 0000000..99a5f9c --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.d @@ -0,0 +1,97 @@ +Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o: \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o new file mode 100644 index 0000000..2111c0f Binary files /dev/null and b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o differ diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.su b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.su new file mode 100644 index 0000000..9c79411 --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.su @@ -0,0 +1,20 @@ +usbd_core.c:89:20:USBD_Init 24 static +usbd_core.c:128:20:USBD_DeInit 16 static +usbd_core.c:152:21:USBD_RegisterClass 24 static +usbd_core.c:178:21:USBD_Start 16 static +usbd_core.c:192:21:USBD_Stop 16 static +usbd_core.c:209:21:USBD_RunTestMode 16 static +usbd_core.c:225:20:USBD_SetClassConfig 24 static +usbd_core.c:248:20:USBD_ClrClassConfig 16 static +usbd_core.c:263:20:USBD_LL_SetupStage 16 static +usbd_core.c:300:20:USBD_LL_DataOutStage 32 static +usbd_core.c:361:20:USBD_LL_DataInStage 32 static +usbd_core.c:442:20:USBD_LL_Reset 16 static +usbd_core.c:476:20:USBD_LL_SetSpeed 16 static +usbd_core.c:491:20:USBD_LL_Suspend 16 static +usbd_core.c:506:20:USBD_LL_Resume 16 static +usbd_core.c:523:20:USBD_LL_SOF 16 static +usbd_core.c:542:20:USBD_LL_IsoINIncomplete 16 static +usbd_core.c:558:20:USBD_LL_IsoOUTIncomplete 16 static +usbd_core.c:574:20:USBD_LL_DevConnected 16 static +usbd_core.c:588:20:USBD_LL_DevDisconnected 16 static diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.d b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.d new file mode 100644 index 0000000..9401bb8 --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.d @@ -0,0 +1,100 @@ +Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o: \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o new file mode 100644 index 0000000..678781e Binary files /dev/null and b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o differ diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.su b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.su new file mode 100644 index 0000000..d38865f --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.su @@ -0,0 +1,14 @@ +usbd_ctlreq.c:114:21:USBD_StdDevReq 24 static +usbd_ctlreq.c:178:21:USBD_StdItfReq 24 static +usbd_ctlreq.c:230:21:USBD_StdEPReq 24 static +usbd_ctlreq.c:405:13:USBD_GetDescriptor 24 static +usbd_ctlreq.c:595:13:USBD_SetAddress 24 static +usbd_ctlreq.c:637:13:USBD_SetConfig 16 static +usbd_ctlreq.c:712:13:USBD_GetConfig 16 static +usbd_ctlreq.c:746:13:USBD_GetStatus 16 static +usbd_ctlreq.c:787:13:USBD_SetFeature 16 static +usbd_ctlreq.c:805:13:USBD_ClrFeature 16 static +usbd_ctlreq.c:834:6:USBD_ParseSetupRequest 16 static +usbd_ctlreq.c:852:6:USBD_CtlError 16 static +usbd_ctlreq.c:868:6:USBD_GetString 32 static +usbd_ctlreq.c:892:16:USBD_GetLen 24 static diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.d b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.d new file mode 100644 index 0000000..215f121 --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.d @@ -0,0 +1,97 @@ +Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o: \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o new file mode 100644 index 0000000..a910e77 Binary files /dev/null and b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o differ diff --git a/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.su b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.su new file mode 100644 index 0000000..c95025c --- /dev/null +++ b/Maple/Debug/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.su @@ -0,0 +1,7 @@ +usbd_ioreq.c:87:20:USBD_CtlSendData 24 static +usbd_ioreq.c:109:20:USBD_CtlContinueSendData 24 static +usbd_ioreq.c:126:20:USBD_CtlPrepareRx 24 static +usbd_ioreq.c:148:20:USBD_CtlContinueRx 24 static +usbd_ioreq.c:162:20:USBD_CtlSendStatus 16 static +usbd_ioreq.c:179:20:USBD_CtlReceiveStatus 16 static +usbd_ioreq.c:197:10:USBD_GetRxCount 16 static diff --git a/Maple/Debug/USB_DEVICE/App/subdir.mk b/Maple/Debug/USB_DEVICE/App/subdir.mk new file mode 100644 index 0000000..30572c9 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/App/subdir.mk @@ -0,0 +1,29 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../USB_DEVICE/App/usb_device.c \ +../USB_DEVICE/App/usbd_cdc_if.c \ +../USB_DEVICE/App/usbd_desc.c + +OBJS += \ +./USB_DEVICE/App/usb_device.o \ +./USB_DEVICE/App/usbd_cdc_if.o \ +./USB_DEVICE/App/usbd_desc.o + +C_DEPS += \ +./USB_DEVICE/App/usb_device.d \ +./USB_DEVICE/App/usbd_cdc_if.d \ +./USB_DEVICE/App/usbd_desc.d + + +# Each subdirectory must supply rules for building sources it contributes +USB_DEVICE/App/usb_device.o: ../USB_DEVICE/App/usb_device.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"USB_DEVICE/App/usb_device.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +USB_DEVICE/App/usbd_cdc_if.o: ../USB_DEVICE/App/usbd_cdc_if.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"USB_DEVICE/App/usbd_cdc_if.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +USB_DEVICE/App/usbd_desc.o: ../USB_DEVICE/App/usbd_desc.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"USB_DEVICE/App/usbd_desc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Maple/Debug/USB_DEVICE/App/usb_device.d b/Maple/Debug/USB_DEVICE/App/usb_device.d new file mode 100644 index 0000000..0f6b154 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/App/usb_device.d @@ -0,0 +1,114 @@ +USB_DEVICE/App/usb_device.o: ../USB_DEVICE/App/usb_device.c \ + ../USB_DEVICE/App/usb_device.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h \ + ../USB_DEVICE/App/usbd_desc.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../USB_DEVICE/App/usbd_cdc_if.h + +../USB_DEVICE/App/usb_device.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: + +../USB_DEVICE/App/usbd_desc.h: + +../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../USB_DEVICE/App/usbd_cdc_if.h: diff --git a/Maple/Debug/USB_DEVICE/App/usb_device.o b/Maple/Debug/USB_DEVICE/App/usb_device.o new file mode 100644 index 0000000..080d437 Binary files /dev/null and b/Maple/Debug/USB_DEVICE/App/usb_device.o differ diff --git a/Maple/Debug/USB_DEVICE/App/usb_device.su b/Maple/Debug/USB_DEVICE/App/usb_device.su new file mode 100644 index 0000000..817cd0d --- /dev/null +++ b/Maple/Debug/USB_DEVICE/App/usb_device.su @@ -0,0 +1 @@ +usb_device.c:65:6:MX_USB_DEVICE_Init 8 static diff --git a/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.d b/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.d new file mode 100644 index 0000000..3529566 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.d @@ -0,0 +1,102 @@ +USB_DEVICE/App/usbd_cdc_if.o: ../USB_DEVICE/App/usbd_cdc_if.c \ + ../USB_DEVICE/App/usbd_cdc_if.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h + +../USB_DEVICE/App/usbd_cdc_if.h: + +../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: diff --git a/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.o b/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.o new file mode 100644 index 0000000..64ef386 Binary files /dev/null and b/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.o differ diff --git a/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.su b/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.su new file mode 100644 index 0000000..4e1b1f2 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/App/usbd_cdc_if.su @@ -0,0 +1,5 @@ +usbd_cdc_if.c:151:15:CDC_Init_FS 8 static +usbd_cdc_if.c:165:15:CDC_DeInit_FS 4 static +usbd_cdc_if.c:179:15:CDC_Control_FS 16 static +usbd_cdc_if.c:260:15:CDC_Receive_FS 16 static +usbd_cdc_if.c:280:9:CDC_Transmit_FS 24 static diff --git a/Maple/Debug/USB_DEVICE/App/usbd_desc.d b/Maple/Debug/USB_DEVICE/App/usbd_desc.d new file mode 100644 index 0000000..8092037 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/App/usbd_desc.d @@ -0,0 +1,102 @@ +USB_DEVICE/App/usbd_desc.o: ../USB_DEVICE/App/usbd_desc.c \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h \ + ../USB_DEVICE/App/usbd_desc.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: + +../USB_DEVICE/App/usbd_desc.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: diff --git a/Maple/Debug/USB_DEVICE/App/usbd_desc.o b/Maple/Debug/USB_DEVICE/App/usbd_desc.o new file mode 100644 index 0000000..c01f00c Binary files /dev/null and b/Maple/Debug/USB_DEVICE/App/usbd_desc.o differ diff --git a/Maple/Debug/USB_DEVICE/App/usbd_desc.su b/Maple/Debug/USB_DEVICE/App/usbd_desc.su new file mode 100644 index 0000000..046c2b6 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/App/usbd_desc.su @@ -0,0 +1,9 @@ +usbd_desc.c:223:11:USBD_FS_DeviceDescriptor 16 static +usbd_desc.c:236:11:USBD_FS_LangIDStrDescriptor 16 static +usbd_desc.c:249:11:USBD_FS_ProductStrDescriptor 16 static +usbd_desc.c:268:11:USBD_FS_ManufacturerStrDescriptor 16 static +usbd_desc.c:281:11:USBD_FS_SerialStrDescriptor 16 static +usbd_desc.c:301:11:USBD_FS_ConfigStrDescriptor 16 static +usbd_desc.c:320:11:USBD_FS_InterfaceStrDescriptor 16 static +usbd_desc.c:338:13:Get_SerialNum 24 static +usbd_desc.c:362:13:IntToUnicode 32 static diff --git a/Maple/Debug/USB_DEVICE/Target/subdir.mk b/Maple/Debug/USB_DEVICE/Target/subdir.mk new file mode 100644 index 0000000..b9347d6 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/Target/subdir.mk @@ -0,0 +1,19 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../USB_DEVICE/Target/usbd_conf.c + +OBJS += \ +./USB_DEVICE/Target/usbd_conf.o + +C_DEPS += \ +./USB_DEVICE/Target/usbd_conf.d + + +# Each subdirectory must supply rules for building sources it contributes +USB_DEVICE/Target/usbd_conf.o: ../USB_DEVICE/Target/usbd_conf.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m3 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F103xB -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc -I../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F1xx/Include -I../Drivers/CMSIS/Include -I../USB_DEVICE/App -I../USB_DEVICE/Target -I../Middlewares/ST/STM32_USB_Device_Library/Core/Inc -I../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"USB_DEVICE/Target/usbd_conf.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Maple/Debug/USB_DEVICE/Target/usbd_conf.d b/Maple/Debug/USB_DEVICE/Target/usbd_conf.d new file mode 100644 index 0000000..b791248 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/Target/usbd_conf.d @@ -0,0 +1,105 @@ +USB_DEVICE/Target/usbd_conf.o: ../USB_DEVICE/Target/usbd_conf.c \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h \ + ../Drivers/CMSIS/Include/core_cm3.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h \ + ../Core/Inc/stm32f1xx_hal_conf.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h \ + ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../USB_DEVICE/Target/usbd_conf.h ../Core/Inc/main.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h \ + ../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h: + +../Drivers/CMSIS/Include/core_cm3.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h: + +../Core/Inc/stm32f1xx_hal_conf.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h: + +../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../USB_DEVICE/Target/usbd_conf.h: + +../Core/Inc/main.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h: + +../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h: + +../Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h: diff --git a/Maple/Debug/USB_DEVICE/Target/usbd_conf.o b/Maple/Debug/USB_DEVICE/Target/usbd_conf.o new file mode 100644 index 0000000..04432ea Binary files /dev/null and b/Maple/Debug/USB_DEVICE/Target/usbd_conf.o differ diff --git a/Maple/Debug/USB_DEVICE/Target/usbd_conf.su b/Maple/Debug/USB_DEVICE/Target/usbd_conf.su new file mode 100644 index 0000000..79a83a2 --- /dev/null +++ b/Maple/Debug/USB_DEVICE/Target/usbd_conf.su @@ -0,0 +1,32 @@ +usbd_conf.c:70:6:HAL_PCD_MspInit 24 static +usbd_conf.c:91:6:HAL_PCD_MspDeInit 16 static +usbd_conf.c:120:6:HAL_PCD_SetupStageCallback 16 static +usbd_conf.c:135:6:HAL_PCD_DataOutStageCallback 16 static +usbd_conf.c:150:6:HAL_PCD_DataInStageCallback 16 static +usbd_conf.c:164:6:HAL_PCD_SOFCallback 16 static +usbd_conf.c:178:6:HAL_PCD_ResetCallback 24 static +usbd_conf.c:203:6:HAL_PCD_SuspendCallback 16 static +usbd_conf.c:227:6:HAL_PCD_ResumeCallback 16 static +usbd_conf.c:245:6:HAL_PCD_ISOOUTIncompleteCallback 16 static +usbd_conf.c:260:6:HAL_PCD_ISOINIncompleteCallback 16 static +usbd_conf.c:274:6:HAL_PCD_ConnectCallback 16 static +usbd_conf.c:288:6:HAL_PCD_DisconnectCallback 16 static +usbd_conf.c:303:20:USBD_LL_Init 16 static +usbd_conf.c:353:20:USBD_LL_DeInit 24 static +usbd_conf.c:370:20:USBD_LL_Start 24 static +usbd_conf.c:387:20:USBD_LL_Stop 24 static +usbd_conf.c:407:20:USBD_LL_OpenEP 24 static +usbd_conf.c:425:20:USBD_LL_CloseEP 24 static +usbd_conf.c:443:20:USBD_LL_FlushEP 24 static +usbd_conf.c:461:20:USBD_LL_StallEP 24 static +usbd_conf.c:479:20:USBD_LL_ClearStallEP 24 static +usbd_conf.c:497:9:USBD_LL_IsStallEP 24 static +usbd_conf.c:517:20:USBD_LL_SetUSBAddress 24 static +usbd_conf.c:537:20:USBD_LL_Transmit 32 static +usbd_conf.c:557:20:USBD_LL_PrepareReceive 32 static +usbd_conf.c:575:10:USBD_LL_GetRxDataSize 16 static +usbd_conf.c:585:6:USBD_LL_Delay 16 static +usbd_conf.c:595:7:USBD_static_malloc 16 static +usbd_conf.c:606:6:USBD_static_free 16 static +usbd_conf.c:620:6:HAL_PCDEx_SetConnectionState 16 static +usbd_conf.c:642:20:USBD_Get_USB_Status 24 static diff --git a/Maple/Debug/makefile b/Maple/Debug/makefile new file mode 100644 index 0000000..d03bd30 --- /dev/null +++ b/Maple/Debug/makefile @@ -0,0 +1,98 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +-include ../makefile.init + +RM := rm -rf + +# All of the sources participating in the build are defined here +-include sources.mk +-include USB_DEVICE/Target/subdir.mk +-include USB_DEVICE/App/subdir.mk +-include Middlewares/ST/STM32_USB_Device_Library/Core/Src/subdir.mk +-include Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/subdir.mk +-include Drivers/STM32F1xx_HAL_Driver/Src/subdir.mk +-include Core/Startup/subdir.mk +-include Core/Src/subdir.mk +-include subdir.mk +-include objects.mk + +ifneq ($(MAKECMDGOALS),clean) +ifneq ($(strip $(S_DEPS)),) +-include $(S_DEPS) +endif +ifneq ($(strip $(S_UPPER_DEPS)),) +-include $(S_UPPER_DEPS) +endif +ifneq ($(strip $(C_DEPS)),) +-include $(C_DEPS) +endif +endif + +-include ../makefile.defs + +BUILD_ARTIFACT_NAME := Maple +BUILD_ARTIFACT_EXTENSION := elf +BUILD_ARTIFACT_PREFIX := +BUILD_ARTIFACT := $(BUILD_ARTIFACT_PREFIX)$(BUILD_ARTIFACT_NAME).$(BUILD_ARTIFACT_EXTENSION) + +# Add inputs and outputs from these tool invocations to the build variables +EXECUTABLES += \ +Maple.elf \ + +SIZE_OUTPUT += \ +default.size.stdout \ + +OBJDUMP_LIST += \ +Maple.list \ + +OBJCOPY_BIN += \ +Maple.bin \ + + +# All Target +all: main-build + +# Main-build Target +main-build: Maple.elf secondary-outputs + +# Tool invocations +Maple.elf: $(OBJS) $(USER_OBJS) /home/jof/STM32CubeIDE/workspace_1.5.0/Maple/STM32F103CBUX_FLASH.ld + arm-none-eabi-gcc -o "Maple.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m3 -T"/home/jof/STM32CubeIDE/workspace_1.5.0/Maple/STM32F103CBUX_FLASH.ld" --specs=nosys.specs -Wl,-Map="Maple.map" -Wl,--gc-sections -static --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -Wl,--end-group + @echo 'Finished building target: $@' + @echo ' ' + +default.size.stdout: $(EXECUTABLES) + arm-none-eabi-size $(EXECUTABLES) + @echo 'Finished building: $@' + @echo ' ' + +Maple.list: $(EXECUTABLES) + arm-none-eabi-objdump -h -S $(EXECUTABLES) > "Maple.list" + @echo 'Finished building: $@' + @echo ' ' + +Maple.bin: $(EXECUTABLES) + arm-none-eabi-objcopy -O binary $(EXECUTABLES) "Maple.bin" + @echo 'Finished building: $@' + @echo ' ' + +# Other Targets +clean: + -$(RM) * + -@echo ' ' + +secondary-outputs: $(SIZE_OUTPUT) $(OBJDUMP_LIST) $(OBJCOPY_BIN) + +fail-specified-linker-script-missing: + @echo 'Error: Cannot find the specified linker script. Check the linker settings in the build configuration.' + @exit 2 + +warn-no-linker-script-specified: + @echo 'Warning: No linker script specified. Check the linker settings in the build configuration.' + +.PHONY: all clean dependents fail-specified-linker-script-missing warn-no-linker-script-specified +.SECONDARY: + +-include ../makefile.targets diff --git a/Maple/Debug/objects.list b/Maple/Debug/objects.list new file mode 100644 index 0000000..f993dc7 --- /dev/null +++ b/Maple/Debug/objects.list @@ -0,0 +1,31 @@ +"Core/Src/main.o" +"Core/Src/stm32f1xx_hal_msp.o" +"Core/Src/stm32f1xx_it.o" +"Core/Src/syscalls.o" +"Core/Src/sysmem.o" +"Core/Src/system_stm32f1xx.o" +"Core/Startup/startup_stm32f103cbux.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.o" +"Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.o" +"Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.o" +"Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.o" +"Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.o" +"Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.o" +"USB_DEVICE/App/usb_device.o" +"USB_DEVICE/App/usbd_cdc_if.o" +"USB_DEVICE/App/usbd_desc.o" +"USB_DEVICE/Target/usbd_conf.o" diff --git a/Maple/Debug/objects.mk b/Maple/Debug/objects.mk new file mode 100644 index 0000000..742c2da --- /dev/null +++ b/Maple/Debug/objects.mk @@ -0,0 +1,8 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +USER_OBJS := + +LIBS := + diff --git a/Maple/Debug/sources.mk b/Maple/Debug/sources.mk new file mode 100644 index 0000000..0dca88a --- /dev/null +++ b/Maple/Debug/sources.mk @@ -0,0 +1,29 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +ELF_SRCS := +OBJ_SRCS := +S_SRCS := +C_SRCS := +S_UPPER_SRCS := +O_SRCS := +SIZE_OUTPUT := +OBJDUMP_LIST := +EXECUTABLES := +OBJS := +S_DEPS := +S_UPPER_DEPS := +C_DEPS := +OBJCOPY_BIN := + +# Every subdirectory with source files must be described here +SUBDIRS := \ +Core/Src \ +Core/Startup \ +Drivers/STM32F1xx_HAL_Driver/Src \ +Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src \ +Middlewares/ST/STM32_USB_Device_Library/Core/Src \ +USB_DEVICE/App \ +USB_DEVICE/Target \ + diff --git a/Maple/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h b/Maple/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h new file mode 100644 index 0000000..9f62fe9 --- /dev/null +++ b/Maple/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h @@ -0,0 +1,10234 @@ +/** + ****************************************************************************** + * @file stm32f103xb.h + * @author MCD Application Team + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F1xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f103xb + * @{ + */ + +#ifndef __STM32F103xB_H +#define __STM32F103xB_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x0200U /*!< Core Revision r2p0 */ + #define __MPU_PRESENT 0U /*!< Other STM32 devices does not provide an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f1xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ + __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ + uint32_t RESERVED[16]; + __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ +} ADC_Common_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint32_t DR1; + __IO uint32_t DR2; + __IO uint32_t DR3; + __IO uint32_t DR4; + __IO uint32_t DR5; + __IO uint32_t DR6; + __IO uint32_t DR7; + __IO uint32_t DR8; + __IO uint32_t DR9; + __IO uint32_t DR10; + __IO uint32_t RTCCR; + __IO uint32_t CR; + __IO uint32_t CSR; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[14]; +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ + uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t OAR1; + __IO uint32_t OAR2; + __IO uint32_t DR; + __IO uint32_t SR1; + __IO uint32_t SR2; + __IO uint32_t CCR; + __IO uint32_t TRISE; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t CRH; + __IO uint32_t CRL; + __IO uint32_t PRLH; + __IO uint32_t PRLL; + __IO uint32_t DIVH; + __IO uint32_t DIVL; + __IO uint32_t CNTH; + __IO uint32_t CNTL; + __IO uint32_t ALRH; + __IO uint32_t ALRL; +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SR; + __IO uint32_t DR; + __IO uint32_t CRCPR; + __IO uint32_t RXCRCR; + __IO uint32_t TXCRCR; + __IO uint32_t I2SCFGR; +} SPI_TypeDef; + +/** + * @brief TIM Timers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +}TIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE 0x08000000UL /*!< FLASH base address in the alias region */ +#define FLASH_BANK1_END 0x0801FFFFUL /*!< FLASH END address of bank1 */ +#define SRAM_BASE 0x20000000UL /*!< SRAM base address in the alias region */ +#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE 0x22000000UL /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */ + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400UL) +#define BKP_BASE (APB1PERIPH_BASE + 0x00006C00UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000UL) +#define AFIO_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400UL) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x00000800UL) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x00000C00UL) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x00001000UL) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x00001400UL) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x00001800UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC2_BASE (APB2PERIPH_BASE + 0x00002800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + + +#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x00000080UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< Flash registers base address */ +#define FLASHSIZE_BASE 0x1FFFF7E0UL /*!< FLASH Size register base address */ +#define UID_BASE 0x1FFFF7E8UL /*!< Unique device ID register base address */ +#define OB_BASE 0x1FFFF800UL /*!< Flash Option Bytes base address */ + + + +#define DBGMCU_BASE 0xE0042000UL /*!< Debug MCU registers base address */ + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ + + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define USB ((USB_TypeDef *)USB_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *)ADC1_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define OB ((OB_TypeDef *)OB_BASE) +#define DBGMCU ((DBGMCU_TypeDef *)DBGMCU_BASE) + + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS_Pos (0U) +#define PWR_CR_LPDS_Msk (0x1UL << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ +#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS_Pos (1U) +#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ +#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF_Pos (2U) +#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ +#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF_Pos (3U) +#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ +#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ +#define PWR_CR_PVDE_Pos (4U) +#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS_Pos (5U) +#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 2.2V */ +#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 2.3V */ +#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2.4V */ +#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 2.5V */ +#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 2.6V */ +#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 2.7V */ +#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 2.8V */ +#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 2.9V */ + +/* Legacy defines */ +#define PWR_CR_PLS_2V2 PWR_CR_PLS_LEV0 +#define PWR_CR_PLS_2V3 PWR_CR_PLS_LEV1 +#define PWR_CR_PLS_2V4 PWR_CR_PLS_LEV2 +#define PWR_CR_PLS_2V5 PWR_CR_PLS_LEV3 +#define PWR_CR_PLS_2V6 PWR_CR_PLS_LEV4 +#define PWR_CR_PLS_2V7 PWR_CR_PLS_LEV5 +#define PWR_CR_PLS_2V8 PWR_CR_PLS_LEV6 +#define PWR_CR_PLS_2V9 PWR_CR_PLS_LEV7 + +#define PWR_CR_DBP_Pos (8U) +#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF_Pos (0U) +#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ +#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ +#define PWR_CSR_SBF_Pos (1U) +#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ +#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ +#define PWR_CSR_PVDO_Pos (2U) +#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ +#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ +#define PWR_CSR_EWUP_Pos (8U) +#define PWR_CSR_EWUP_Msk (0x1UL << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ +#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D_Pos (0U) +#define BKP_DR1_D_Msk (0xFFFFUL << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D_Pos (0U) +#define BKP_DR2_D_Msk (0xFFFFUL << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D_Pos (0U) +#define BKP_DR3_D_Msk (0xFFFFUL << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D_Pos (0U) +#define BKP_DR4_D_Msk (0xFFFFUL << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D_Pos (0U) +#define BKP_DR5_D_Msk (0xFFFFUL << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D_Pos (0U) +#define BKP_DR6_D_Msk (0xFFFFUL << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D_Pos (0U) +#define BKP_DR7_D_Msk (0xFFFFUL << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D_Pos (0U) +#define BKP_DR8_D_Msk (0xFFFFUL << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D_Pos (0U) +#define BKP_DR9_D_Msk (0xFFFFUL << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D_Pos (0U) +#define BKP_DR10_D_Msk (0xFFFFUL << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ +#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ + +#define RTC_BKP_NUMBER 10 + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL_Pos (0U) +#define BKP_RTCCR_CAL_Msk (0x7FUL << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ +#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ +#define BKP_RTCCR_CCO_Pos (7U) +#define BKP_RTCCR_CCO_Msk (0x1UL << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ +#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE_Pos (8U) +#define BKP_RTCCR_ASOE_Msk (0x1UL << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ +#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS_Pos (9U) +#define BKP_RTCCR_ASOS_Msk (0x1UL << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ +#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE_Pos (0U) +#define BKP_CR_TPE_Msk (0x1UL << BKP_CR_TPE_Pos) /*!< 0x00000001 */ +#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ +#define BKP_CR_TPAL_Pos (1U) +#define BKP_CR_TPAL_Msk (0x1UL << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ +#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE_Pos (0U) +#define BKP_CSR_CTE_Msk (0x1UL << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ +#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ +#define BKP_CSR_CTI_Pos (1U) +#define BKP_CSR_CTI_Msk (0x1UL << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ +#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE_Pos (2U) +#define BKP_CSR_TPIE_Msk (0x1UL << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ +#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF_Pos (8U) +#define BKP_CSR_TEF_Msk (0x1UL << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ +#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ +#define BKP_CSR_TIF_Pos (9U) +#define BKP_CSR_TIF_Msk (0x1UL << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ +#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY_Pos (1U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM_Pos (3U) +#define RCC_CR_HSITRIM_Msk (0x1FUL << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ +#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL_Pos (8U) +#define RCC_CR_HSICAL_Msk (0xFFUL << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ +#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ + + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 0x00000400U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 0x00000500U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 0x00000600U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 0x00000700U /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 0x00002000U /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 0x00002800U /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 0x00003000U /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 0x00003800U /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE_Pos (14U) +#define RCC_CFGR_ADCPRE_Msk (0x3UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ +#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 (0x1UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ +#define RCC_CFGR_ADCPRE_1 (0x2UL << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ + +#define RCC_CFGR_ADCPRE_DIV2 0x00000000U /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 0x00004000U /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 0x00008000U /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 0x0000C000U /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC_Pos (16U) +#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE_Pos (17U) +#define RCC_CFGR_PLLXTPRE_Msk (0x1UL << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL_Pos (18U) +#define RCC_CFGR_PLLMULL_Msk (0xFUL << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 (0x1UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL_1 (0x2UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL_2 (0x4UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL_3 (0x8UL << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_PLLXTPRE_HSE 0x00000000U /*!< HSE clock not divided for PLL entry */ +#define RCC_CFGR_PLLXTPRE_HSE_DIV2 0x00020000U /*!< HSE clock divided by 2 for PLL entry */ + +#define RCC_CFGR_PLLMULL2 0x00000000U /*!< PLL input clock*2 */ +#define RCC_CFGR_PLLMULL3_Pos (18U) +#define RCC_CFGR_PLLMULL3_Msk (0x1UL << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ +#define RCC_CFGR_PLLMULL4_Pos (19U) +#define RCC_CFGR_PLLMULL4_Msk (0x1UL << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ +#define RCC_CFGR_PLLMULL5_Pos (18U) +#define RCC_CFGR_PLLMULL5_Msk (0x3UL << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ +#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ +#define RCC_CFGR_PLLMULL6_Pos (20U) +#define RCC_CFGR_PLLMULL6_Msk (0x1UL << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ +#define RCC_CFGR_PLLMULL7_Pos (18U) +#define RCC_CFGR_PLLMULL7_Msk (0x5UL << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ +#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ +#define RCC_CFGR_PLLMULL8_Pos (19U) +#define RCC_CFGR_PLLMULL8_Msk (0x3UL << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ +#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ +#define RCC_CFGR_PLLMULL9_Pos (18U) +#define RCC_CFGR_PLLMULL9_Msk (0x7UL << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ +#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ +#define RCC_CFGR_PLLMULL10_Pos (21U) +#define RCC_CFGR_PLLMULL10_Msk (0x1UL << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ +#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ +#define RCC_CFGR_PLLMULL11_Pos (18U) +#define RCC_CFGR_PLLMULL11_Msk (0x9UL << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ +#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ +#define RCC_CFGR_PLLMULL12_Pos (19U) +#define RCC_CFGR_PLLMULL12_Msk (0x5UL << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ +#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ +#define RCC_CFGR_PLLMULL13_Pos (18U) +#define RCC_CFGR_PLLMULL13_Msk (0xBUL << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ +#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ +#define RCC_CFGR_PLLMULL14_Pos (20U) +#define RCC_CFGR_PLLMULL14_Msk (0x3UL << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ +#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ +#define RCC_CFGR_PLLMULL15_Pos (18U) +#define RCC_CFGR_PLLMULL15_Msk (0xDUL << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ +#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ +#define RCC_CFGR_PLLMULL16_Pos (19U) +#define RCC_CFGR_PLLMULL16_Msk (0x7UL << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ +#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ +#define RCC_CFGR_USBPRE_Pos (22U) +#define RCC_CFGR_USBPRE_Msk (0x1UL << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_Pos (24U) +#define RCC_CFGR_MCO_Msk (0x7UL << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ +#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCO_0 (0x1UL << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCO_1 (0x2UL << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO_2 (0x4UL << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ + +#define RCC_CFGR_MCO_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK 0x04000000U /*!< System clock selected as MCO source */ +#define RCC_CFGR_MCO_HSI 0x05000000U /*!< HSI clock selected as MCO source */ +#define RCC_CFGR_MCO_HSE 0x06000000U /*!< HSE clock selected as MCO source */ +#define RCC_CFGR_MCO_PLLCLK_DIV2 0x07000000U /*!< PLL clock divided by 2 selected as MCO source */ + + /* Reference defines */ + #define RCC_CFGR_MCOSEL RCC_CFGR_MCO + #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 + #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 + #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 + #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK + #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK + #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI + #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE + #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF_Pos (0U) +#define RCC_CIR_LSIRDYF_Msk (0x1UL << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF_Pos (1U) +#define RCC_CIR_LSERDYF_Msk (0x1UL << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF_Pos (2U) +#define RCC_CIR_HSIRDYF_Msk (0x1UL << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF_Pos (3U) +#define RCC_CIR_HSERDYF_Msk (0x1UL << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF_Pos (4U) +#define RCC_CIR_PLLRDYF_Msk (0x1UL << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF_Pos (7U) +#define RCC_CIR_CSSF_Msk (0x1UL << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ +#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE_Pos (8U) +#define RCC_CIR_LSIRDYIE_Msk (0x1UL << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE_Pos (9U) +#define RCC_CIR_LSERDYIE_Msk (0x1UL << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ +#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE_Pos (10U) +#define RCC_CIR_HSIRDYIE_Msk (0x1UL << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ +#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE_Pos (11U) +#define RCC_CIR_HSERDYIE_Msk (0x1UL << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE_Pos (12U) +#define RCC_CIR_PLLRDYIE_Msk (0x1UL << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ +#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC_Pos (16U) +#define RCC_CIR_LSIRDYC_Msk (0x1UL << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ +#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC_Pos (17U) +#define RCC_CIR_LSERDYC_Msk (0x1UL << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ +#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC_Pos (18U) +#define RCC_CIR_HSIRDYC_Msk (0x1UL << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ +#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC_Pos (19U) +#define RCC_CIR_HSERDYC_Msk (0x1UL << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ +#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC_Pos (20U) +#define RCC_CIR_PLLRDYC_Msk (0x1UL << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ +#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC_Pos (23U) +#define RCC_CIR_CSSC_Msk (0x1UL << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ +#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ + + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST_Pos (0U) +#define RCC_APB2RSTR_AFIORST_Msk (0x1UL << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST_Pos (2U) +#define RCC_APB2RSTR_IOPARST_Msk (0x1UL << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ +#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST_Pos (3U) +#define RCC_APB2RSTR_IOPBRST_Msk (0x1UL << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ +#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST_Pos (4U) +#define RCC_APB2RSTR_IOPCRST_Msk (0x1UL << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST_Pos (5U) +#define RCC_APB2RSTR_IOPDRST_Msk (0x1UL << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ +#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST_Pos (9U) +#define RCC_APB2RSTR_ADC1RST_Msk (0x1UL << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ + +#define RCC_APB2RSTR_ADC2RST_Pos (10U) +#define RCC_APB2RSTR_ADC2RST_Msk (0x1UL << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ +#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ + +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ + + +#define RCC_APB2RSTR_IOPERST_Pos (6U) +#define RCC_APB2RSTR_IOPERST_Msk (0x1UL << RCC_APB2RSTR_IOPERST_Pos) /*!< 0x00000040 */ +#define RCC_APB2RSTR_IOPERST RCC_APB2RSTR_IOPERST_Msk /*!< I/O port E reset */ + + + + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST_Pos (0U) +#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST_Pos (1U) +#define RCC_APB1RSTR_TIM3RST_Msk (0x1UL << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST_Pos (11U) +#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ +#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST_Pos (17U) +#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST_Pos (21U) +#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ + +#define RCC_APB1RSTR_CAN1RST_Pos (25U) +#define RCC_APB1RSTR_CAN1RST_Msk (0x1UL << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ +#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ + +#define RCC_APB1RSTR_BKPRST_Pos (27U) +#define RCC_APB1RSTR_BKPRST_Msk (0x1UL << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST_Pos (28U) +#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ +#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ + +#define RCC_APB1RSTR_TIM4RST_Pos (2U) +#define RCC_APB1RSTR_TIM4RST_Msk (0x1UL << RCC_APB1RSTR_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR_TIM4RST RCC_APB1RSTR_TIM4RST_Msk /*!< Timer 4 reset */ +#define RCC_APB1RSTR_SPI2RST_Pos (14U) +#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI 2 reset */ +#define RCC_APB1RSTR_USART3RST_Pos (18U) +#define RCC_APB1RSTR_USART3RST_Msk (0x1UL << RCC_APB1RSTR_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR_USART3RST RCC_APB1RSTR_USART3RST_Msk /*!< USART 3 reset */ +#define RCC_APB1RSTR_I2C2RST_Pos (22U) +#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ + +#define RCC_APB1RSTR_USBRST_Pos (23U) +#define RCC_APB1RSTR_USBRST_Msk (0x1UL << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ + + + + + + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN_Pos (0U) +#define RCC_AHBENR_DMA1EN_Msk (0x1UL << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN_Pos (2U) +#define RCC_AHBENR_SRAMEN_Msk (0x1UL << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN_Pos (4U) +#define RCC_AHBENR_FLITFEN_Msk (0x1UL << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ +#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN_Pos (6U) +#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ +#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ + + + + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN_Pos (0U) +#define RCC_APB2ENR_AFIOEN_Msk (0x1UL << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN_Pos (2U) +#define RCC_APB2ENR_IOPAEN_Msk (0x1UL << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ +#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN_Pos (3U) +#define RCC_APB2ENR_IOPBEN_Msk (0x1UL << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ +#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN_Pos (4U) +#define RCC_APB2ENR_IOPCEN_Msk (0x1UL << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN_Pos (5U) +#define RCC_APB2ENR_IOPDEN_Msk (0x1UL << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ +#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN_Pos (9U) +#define RCC_APB2ENR_ADC1EN_Msk (0x1UL << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ + +#define RCC_APB2ENR_ADC2EN_Pos (10U) +#define RCC_APB2ENR_ADC2EN_Msk (0x1UL << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ +#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ + +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ + + +#define RCC_APB2ENR_IOPEEN_Pos (6U) +#define RCC_APB2ENR_IOPEEN_Msk (0x1UL << RCC_APB2ENR_IOPEEN_Pos) /*!< 0x00000040 */ +#define RCC_APB2ENR_IOPEEN RCC_APB2ENR_IOPEEN_Msk /*!< I/O port E clock enable */ + + + + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN_Pos (0U) +#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN_Pos (1U) +#define RCC_APB1ENR_TIM3EN_Msk (0x1UL << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN_Pos (11U) +#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN_Pos (17U) +#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN_Pos (21U) +#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ + +#define RCC_APB1ENR_CAN1EN_Pos (25U) +#define RCC_APB1ENR_CAN1EN_Msk (0x1UL << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ +#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ + +#define RCC_APB1ENR_BKPEN_Pos (27U) +#define RCC_APB1ENR_BKPEN_Msk (0x1UL << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN_Pos (28U) +#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ +#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ + +#define RCC_APB1ENR_TIM4EN_Pos (2U) +#define RCC_APB1ENR_TIM4EN_Msk (0x1UL << RCC_APB1ENR_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR_TIM4EN RCC_APB1ENR_TIM4EN_Msk /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_SPI2EN_Pos (14U) +#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_USART3EN_Pos (18U) +#define RCC_APB1ENR_USART3EN_Msk (0x1UL << RCC_APB1ENR_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR_USART3EN RCC_APB1ENR_USART3EN_Msk /*!< USART 3 clock enable */ +#define RCC_APB1ENR_I2C2EN_Pos (22U) +#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C 2 clock enable */ + +#define RCC_APB1ENR_USBEN_Pos (23U) +#define RCC_APB1ENR_USBEN_Msk (0x1UL << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ + + + + + + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK 0x00000000U /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE 0x00000100U /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI 0x00000200U /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE 0x00000300U /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF_Pos (24U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF_Pos (27U) +#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ + + + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE_Pos (0U) +#define GPIO_CRL_MODE_Msk (0x33333333UL << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0_Pos (0U) +#define GPIO_CRL_MODE0_Msk (0x3UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 (0x1UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_CRL_MODE0_1 (0x2UL << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ + +#define GPIO_CRL_MODE1_Pos (4U) +#define GPIO_CRL_MODE1_Msk (0x3UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ +#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 (0x1UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ +#define GPIO_CRL_MODE1_1 (0x2UL << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ + +#define GPIO_CRL_MODE2_Pos (8U) +#define GPIO_CRL_MODE2_Msk (0x3UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ +#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 (0x1UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ +#define GPIO_CRL_MODE2_1 (0x2UL << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ + +#define GPIO_CRL_MODE3_Pos (12U) +#define GPIO_CRL_MODE3_Msk (0x3UL << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ +#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 (0x1UL << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ +#define GPIO_CRL_MODE3_1 (0x2UL << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ + +#define GPIO_CRL_MODE4_Pos (16U) +#define GPIO_CRL_MODE4_Msk (0x3UL << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ +#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 (0x1UL << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ +#define GPIO_CRL_MODE4_1 (0x2UL << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ + +#define GPIO_CRL_MODE5_Pos (20U) +#define GPIO_CRL_MODE5_Msk (0x3UL << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ +#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 (0x1UL << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ +#define GPIO_CRL_MODE5_1 (0x2UL << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ + +#define GPIO_CRL_MODE6_Pos (24U) +#define GPIO_CRL_MODE6_Msk (0x3UL << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ +#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 (0x1UL << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ +#define GPIO_CRL_MODE6_1 (0x2UL << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ + +#define GPIO_CRL_MODE7_Pos (28U) +#define GPIO_CRL_MODE7_Msk (0x3UL << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ +#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 (0x1UL << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ +#define GPIO_CRL_MODE7_1 (0x2UL << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ + +#define GPIO_CRL_CNF_Pos (2U) +#define GPIO_CRL_CNF_Msk (0x33333333UL << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0_Pos (2U) +#define GPIO_CRL_CNF0_Msk (0x3UL << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ +#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 (0x1UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ +#define GPIO_CRL_CNF0_1 (0x2UL << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ + +#define GPIO_CRL_CNF1_Pos (6U) +#define GPIO_CRL_CNF1_Msk (0x3UL << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ +#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 (0x1UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ +#define GPIO_CRL_CNF1_1 (0x2UL << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ + +#define GPIO_CRL_CNF2_Pos (10U) +#define GPIO_CRL_CNF2_Msk (0x3UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ +#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 (0x1UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ +#define GPIO_CRL_CNF2_1 (0x2UL << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ + +#define GPIO_CRL_CNF3_Pos (14U) +#define GPIO_CRL_CNF3_Msk (0x3UL << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ +#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 (0x1UL << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ +#define GPIO_CRL_CNF3_1 (0x2UL << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ + +#define GPIO_CRL_CNF4_Pos (18U) +#define GPIO_CRL_CNF4_Msk (0x3UL << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ +#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 (0x1UL << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ +#define GPIO_CRL_CNF4_1 (0x2UL << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ + +#define GPIO_CRL_CNF5_Pos (22U) +#define GPIO_CRL_CNF5_Msk (0x3UL << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ +#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 (0x1UL << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ +#define GPIO_CRL_CNF5_1 (0x2UL << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ + +#define GPIO_CRL_CNF6_Pos (26U) +#define GPIO_CRL_CNF6_Msk (0x3UL << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ +#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 (0x1UL << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ +#define GPIO_CRL_CNF6_1 (0x2UL << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ + +#define GPIO_CRL_CNF7_Pos (30U) +#define GPIO_CRL_CNF7_Msk (0x3UL << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ +#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 (0x1UL << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ +#define GPIO_CRL_CNF7_1 (0x2UL << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE_Pos (0U) +#define GPIO_CRH_MODE_Msk (0x33333333UL << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ +#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8_Pos (0U) +#define GPIO_CRH_MODE8_Msk (0x3UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ +#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 (0x1UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ +#define GPIO_CRH_MODE8_1 (0x2UL << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ + +#define GPIO_CRH_MODE9_Pos (4U) +#define GPIO_CRH_MODE9_Msk (0x3UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ +#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 (0x1UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ +#define GPIO_CRH_MODE9_1 (0x2UL << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ + +#define GPIO_CRH_MODE10_Pos (8U) +#define GPIO_CRH_MODE10_Msk (0x3UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ +#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 (0x1UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ +#define GPIO_CRH_MODE10_1 (0x2UL << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ + +#define GPIO_CRH_MODE11_Pos (12U) +#define GPIO_CRH_MODE11_Msk (0x3UL << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ +#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 (0x1UL << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ +#define GPIO_CRH_MODE11_1 (0x2UL << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ + +#define GPIO_CRH_MODE12_Pos (16U) +#define GPIO_CRH_MODE12_Msk (0x3UL << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ +#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 (0x1UL << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ +#define GPIO_CRH_MODE12_1 (0x2UL << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ + +#define GPIO_CRH_MODE13_Pos (20U) +#define GPIO_CRH_MODE13_Msk (0x3UL << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ +#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 (0x1UL << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ +#define GPIO_CRH_MODE13_1 (0x2UL << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ + +#define GPIO_CRH_MODE14_Pos (24U) +#define GPIO_CRH_MODE14_Msk (0x3UL << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ +#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 (0x1UL << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ +#define GPIO_CRH_MODE14_1 (0x2UL << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ + +#define GPIO_CRH_MODE15_Pos (28U) +#define GPIO_CRH_MODE15_Msk (0x3UL << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ +#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 (0x1UL << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ +#define GPIO_CRH_MODE15_1 (0x2UL << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ + +#define GPIO_CRH_CNF_Pos (2U) +#define GPIO_CRH_CNF_Msk (0x33333333UL << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ +#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8_Pos (2U) +#define GPIO_CRH_CNF8_Msk (0x3UL << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ +#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 (0x1UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ +#define GPIO_CRH_CNF8_1 (0x2UL << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ + +#define GPIO_CRH_CNF9_Pos (6U) +#define GPIO_CRH_CNF9_Msk (0x3UL << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ +#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 (0x1UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ +#define GPIO_CRH_CNF9_1 (0x2UL << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ + +#define GPIO_CRH_CNF10_Pos (10U) +#define GPIO_CRH_CNF10_Msk (0x3UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ +#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 (0x1UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ +#define GPIO_CRH_CNF10_1 (0x2UL << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ + +#define GPIO_CRH_CNF11_Pos (14U) +#define GPIO_CRH_CNF11_Msk (0x3UL << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ +#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 (0x1UL << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ +#define GPIO_CRH_CNF11_1 (0x2UL << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ + +#define GPIO_CRH_CNF12_Pos (18U) +#define GPIO_CRH_CNF12_Msk (0x3UL << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ +#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 (0x1UL << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ +#define GPIO_CRH_CNF12_1 (0x2UL << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ + +#define GPIO_CRH_CNF13_Pos (22U) +#define GPIO_CRH_CNF13_Msk (0x3UL << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ +#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 (0x1UL << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ +#define GPIO_CRH_CNF13_1 (0x2UL << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ + +#define GPIO_CRH_CNF14_Pos (26U) +#define GPIO_CRH_CNF14_Msk (0x3UL << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ +#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 (0x1UL << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ +#define GPIO_CRH_CNF14_1 (0x2UL << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ + +#define GPIO_CRH_CNF15_Pos (30U) +#define GPIO_CRH_CNF15_Msk (0x3UL << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ +#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 (0x1UL << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ +#define GPIO_CRH_CNF15_1 (0x2UL << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0_Pos (0U) +#define GPIO_IDR_IDR0_Msk (0x1UL << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1_Pos (1U) +#define GPIO_IDR_IDR1_Msk (0x1UL << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2_Pos (2U) +#define GPIO_IDR_IDR2_Msk (0x1UL << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3_Pos (3U) +#define GPIO_IDR_IDR3_Msk (0x1UL << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4_Pos (4U) +#define GPIO_IDR_IDR4_Msk (0x1UL << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5_Pos (5U) +#define GPIO_IDR_IDR5_Msk (0x1UL << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6_Pos (6U) +#define GPIO_IDR_IDR6_Msk (0x1UL << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7_Pos (7U) +#define GPIO_IDR_IDR7_Msk (0x1UL << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8_Pos (8U) +#define GPIO_IDR_IDR8_Msk (0x1UL << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9_Pos (9U) +#define GPIO_IDR_IDR9_Msk (0x1UL << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10_Pos (10U) +#define GPIO_IDR_IDR10_Msk (0x1UL << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11_Pos (11U) +#define GPIO_IDR_IDR11_Msk (0x1UL << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12_Pos (12U) +#define GPIO_IDR_IDR12_Msk (0x1UL << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13_Pos (13U) +#define GPIO_IDR_IDR13_Msk (0x1UL << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14_Pos (14U) +#define GPIO_IDR_IDR14_Msk (0x1UL << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15_Pos (15U) +#define GPIO_IDR_IDR15_Msk (0x1UL << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0_Pos (0U) +#define GPIO_ODR_ODR0_Msk (0x1UL << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1_Pos (1U) +#define GPIO_ODR_ODR1_Msk (0x1UL << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2_Pos (2U) +#define GPIO_ODR_ODR2_Msk (0x1UL << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3_Pos (3U) +#define GPIO_ODR_ODR3_Msk (0x1UL << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4_Pos (4U) +#define GPIO_ODR_ODR4_Msk (0x1UL << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5_Pos (5U) +#define GPIO_ODR_ODR5_Msk (0x1UL << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6_Pos (6U) +#define GPIO_ODR_ODR6_Msk (0x1UL << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7_Pos (7U) +#define GPIO_ODR_ODR7_Msk (0x1UL << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8_Pos (8U) +#define GPIO_ODR_ODR8_Msk (0x1UL << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9_Pos (9U) +#define GPIO_ODR_ODR9_Msk (0x1UL << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10_Pos (10U) +#define GPIO_ODR_ODR10_Msk (0x1UL << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11_Pos (11U) +#define GPIO_ODR_ODR11_Msk (0x1UL << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12_Pos (12U) +#define GPIO_ODR_ODR12_Msk (0x1UL << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13_Pos (13U) +#define GPIO_ODR_ODR13_Msk (0x1UL << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14_Pos (14U) +#define GPIO_ODR_ODR14_Msk (0x1UL << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15_Pos (15U) +#define GPIO_ODR_ODR15_Msk (0x1UL << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN_Pos (0U) +#define AFIO_EVCR_PIN_Msk (0xFUL << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 (0x1UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_1 (0x2UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_2 (0x4UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_3 (0x8UL << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 0x00000000U /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1_Pos (0U) +#define AFIO_EVCR_PIN_PX1_Msk (0x1UL << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ +#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2_Pos (1U) +#define AFIO_EVCR_PIN_PX2_Msk (0x1UL << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ +#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3_Pos (0U) +#define AFIO_EVCR_PIN_PX3_Msk (0x3UL << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ +#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4_Pos (2U) +#define AFIO_EVCR_PIN_PX4_Msk (0x1UL << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ +#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5_Pos (0U) +#define AFIO_EVCR_PIN_PX5_Msk (0x5UL << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ +#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6_Pos (1U) +#define AFIO_EVCR_PIN_PX6_Msk (0x3UL << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ +#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7_Pos (0U) +#define AFIO_EVCR_PIN_PX7_Msk (0x7UL << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ +#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8_Pos (3U) +#define AFIO_EVCR_PIN_PX8_Msk (0x1UL << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ +#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9_Pos (0U) +#define AFIO_EVCR_PIN_PX9_Msk (0x9UL << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ +#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10_Pos (1U) +#define AFIO_EVCR_PIN_PX10_Msk (0x5UL << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ +#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11_Pos (0U) +#define AFIO_EVCR_PIN_PX11_Msk (0xBUL << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ +#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12_Pos (2U) +#define AFIO_EVCR_PIN_PX12_Msk (0x3UL << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ +#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13_Pos (0U) +#define AFIO_EVCR_PIN_PX13_Msk (0xDUL << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ +#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14_Pos (1U) +#define AFIO_EVCR_PIN_PX14_Msk (0x7UL << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ +#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15_Pos (0U) +#define AFIO_EVCR_PIN_PX15_Msk (0xFUL << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ +#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT_Pos (4U) +#define AFIO_EVCR_PORT_Msk (0x7UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ +#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 (0x1UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_1 (0x2UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_2 (0x4UL << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA 0x00000000 /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB_Pos (4U) +#define AFIO_EVCR_PORT_PB_Msk (0x1UL << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC_Pos (5U) +#define AFIO_EVCR_PORT_PC_Msk (0x1UL << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD_Pos (4U) +#define AFIO_EVCR_PORT_PD_Msk (0x3UL << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE_Pos (6U) +#define AFIO_EVCR_PORT_PE_Msk (0x1UL << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ + +#define AFIO_EVCR_EVOE_Pos (7U) +#define AFIO_EVCR_EVOE_Msk (0x1UL << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ +#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP_Pos (0U) +#define AFIO_MAPR_SPI1_REMAP_Msk (0x1UL << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ +#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP_Pos (1U) +#define AFIO_MAPR_I2C1_REMAP_Msk (0x1UL << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ +#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP_Pos (2U) +#define AFIO_MAPR_USART1_REMAP_Msk (0x1UL << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ +#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP_Pos (3U) +#define AFIO_MAPR_USART2_REMAP_Msk (0x1UL << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ +#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP AFIO_MAPR_USART3_REMAP_Msk /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 (0x1UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_1 (0x2UL << AFIO_MAPR_USART3_REMAP_Pos) /*!< 0x00000020 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP 0x00000000U /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000010 */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_MAPR_USART3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos (4U) +#define AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_USART3_REMAP_FULLREMAP_Pos) /*!< 0x00000030 */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_MAPR_USART3_REMAP_FULLREMAP_Msk /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 (0x1UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_1 (0x2UL << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP 0x00000000U /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 (0x1UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_1 (0x2UL << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1UL << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 (0x1UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ +#define AFIO_MAPR_TIM3_REMAP_1 (0x2UL << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP 0x00000000U /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1UL << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3UL << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP_Pos (12U) +#define AFIO_MAPR_TIM4_REMAP_Msk (0x1UL << AFIO_MAPR_TIM4_REMAP_Pos) /*!< 0x00001000 */ +#define AFIO_MAPR_TIM4_REMAP AFIO_MAPR_TIM4_REMAP_Msk /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 (0x1UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ +#define AFIO_MAPR_CAN_REMAP_1 (0x2UL << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 0x00000000U /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) +#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1UL << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) +#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3UL << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP_Pos (15U) +#define AFIO_MAPR_PD01_REMAP_Msk (0x1UL << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ +#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_Msk (0x7UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ +#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 (0x1UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_1 (0x2UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_2 (0x4UL << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ + +#define AFIO_MAPR_SWJ_CFG_RESET 0x00000000U /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) +#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) +#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1UL << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ +#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ + + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0_Pos (0U) +#define AFIO_EXTICR1_EXTI0_Msk (0xFUL << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1_Pos (4U) +#define AFIO_EXTICR1_EXTI1_Msk (0xFUL << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2_Pos (8U) +#define AFIO_EXTICR1_EXTI2_Msk (0xFUL << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3_Pos (12U) +#define AFIO_EXTICR1_EXTI3_Msk (0xFUL << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA 0x00000000U /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) +#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) +#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) +#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA 0x00000000U /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) +#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) +#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) +#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA 0x00000000U /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) +#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) +#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) +#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA 0x00000000U /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) +#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1UL << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) +#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5UL << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) +#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3UL << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4_Pos (0U) +#define AFIO_EXTICR2_EXTI4_Msk (0xFUL << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5_Pos (4U) +#define AFIO_EXTICR2_EXTI5_Msk (0xFUL << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6_Pos (8U) +#define AFIO_EXTICR2_EXTI6_Msk (0xFUL << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7_Pos (12U) +#define AFIO_EXTICR2_EXTI7_Msk (0xFUL << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA 0x00000000U /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) +#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) +#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) +#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA 0x00000000U /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) +#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) +#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) +#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA 0x00000000U /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) +#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) +#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) +#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA 0x00000000U /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) +#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1UL << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) +#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5UL << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) +#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3UL << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8_Pos (0U) +#define AFIO_EXTICR3_EXTI8_Msk (0xFUL << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9_Pos (4U) +#define AFIO_EXTICR3_EXTI9_Msk (0xFUL << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10_Pos (8U) +#define AFIO_EXTICR3_EXTI10_Msk (0xFUL << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11_Pos (12U) +#define AFIO_EXTICR3_EXTI11_Msk (0xFUL << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA 0x00000000U /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) +#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) +#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) +#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA 0x00000000U /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) +#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) +#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) +#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA 0x00000000U /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) +#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) +#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) +#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA 0x00000000U /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) +#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1UL << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) +#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5UL << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) +#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3UL << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12_Pos (0U) +#define AFIO_EXTICR4_EXTI12_Msk (0xFUL << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ +#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13_Pos (4U) +#define AFIO_EXTICR4_EXTI13_Msk (0xFUL << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ +#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14_Pos (8U) +#define AFIO_EXTICR4_EXTI14_Msk (0xFUL << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ +#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15_Pos (12U) +#define AFIO_EXTICR4_EXTI15_Msk (0xFUL << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ +#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA 0x00000000U /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ +#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ +#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ +#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) +#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ +#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) +#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ +#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) +#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ +#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA 0x00000000U /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ +#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ +#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ +#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) +#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ +#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) +#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ +#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) +#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ +#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA 0x00000000U /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ +#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ +#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ +#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) +#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ +#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) +#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ +#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) +#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ +#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA 0x00000000U /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ +#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ +#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ +#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) +#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1UL << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ +#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) +#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5UL << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ +#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) +#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3UL << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ +#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ + +/****************** Bit definition for AFIO_MAPR2 register ******************/ + + + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0_Pos (0U) +#define EXTI_IMR_MR0_Msk (0x1UL << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1_Pos (1U) +#define EXTI_IMR_MR1_Msk (0x1UL << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2_Pos (2U) +#define EXTI_IMR_MR2_Msk (0x1UL << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3_Pos (3U) +#define EXTI_IMR_MR3_Msk (0x1UL << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4_Pos (4U) +#define EXTI_IMR_MR4_Msk (0x1UL << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5_Pos (5U) +#define EXTI_IMR_MR5_Msk (0x1UL << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6_Pos (6U) +#define EXTI_IMR_MR6_Msk (0x1UL << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7_Pos (7U) +#define EXTI_IMR_MR7_Msk (0x1UL << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8_Pos (8U) +#define EXTI_IMR_MR8_Msk (0x1UL << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9_Pos (9U) +#define EXTI_IMR_MR9_Msk (0x1UL << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10_Pos (10U) +#define EXTI_IMR_MR10_Msk (0x1UL << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11_Pos (11U) +#define EXTI_IMR_MR11_Msk (0x1UL << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12_Pos (12U) +#define EXTI_IMR_MR12_Msk (0x1UL << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13_Pos (13U) +#define EXTI_IMR_MR13_Msk (0x1UL << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14_Pos (14U) +#define EXTI_IMR_MR14_Msk (0x1UL << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15_Pos (15U) +#define EXTI_IMR_MR15_Msk (0x1UL << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16_Pos (16U) +#define EXTI_IMR_MR16_Msk (0x1UL << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17_Pos (17U) +#define EXTI_IMR_MR17_Msk (0x1UL << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18_Pos (18U) +#define EXTI_IMR_MR18_Msk (0x1UL << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ + +/* References Defines */ +#define EXTI_IMR_IM0 EXTI_IMR_MR0 +#define EXTI_IMR_IM1 EXTI_IMR_MR1 +#define EXTI_IMR_IM2 EXTI_IMR_MR2 +#define EXTI_IMR_IM3 EXTI_IMR_MR3 +#define EXTI_IMR_IM4 EXTI_IMR_MR4 +#define EXTI_IMR_IM5 EXTI_IMR_MR5 +#define EXTI_IMR_IM6 EXTI_IMR_MR6 +#define EXTI_IMR_IM7 EXTI_IMR_MR7 +#define EXTI_IMR_IM8 EXTI_IMR_MR8 +#define EXTI_IMR_IM9 EXTI_IMR_MR9 +#define EXTI_IMR_IM10 EXTI_IMR_MR10 +#define EXTI_IMR_IM11 EXTI_IMR_MR11 +#define EXTI_IMR_IM12 EXTI_IMR_MR12 +#define EXTI_IMR_IM13 EXTI_IMR_MR13 +#define EXTI_IMR_IM14 EXTI_IMR_MR14 +#define EXTI_IMR_IM15 EXTI_IMR_MR15 +#define EXTI_IMR_IM16 EXTI_IMR_MR16 +#define EXTI_IMR_IM17 EXTI_IMR_MR17 +#define EXTI_IMR_IM18 EXTI_IMR_MR18 +#define EXTI_IMR_IM 0x0007FFFFU /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0_Pos (0U) +#define EXTI_EMR_MR0_Msk (0x1UL << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1_Pos (1U) +#define EXTI_EMR_MR1_Msk (0x1UL << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2_Pos (2U) +#define EXTI_EMR_MR2_Msk (0x1UL << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3_Pos (3U) +#define EXTI_EMR_MR3_Msk (0x1UL << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4_Pos (4U) +#define EXTI_EMR_MR4_Msk (0x1UL << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5_Pos (5U) +#define EXTI_EMR_MR5_Msk (0x1UL << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6_Pos (6U) +#define EXTI_EMR_MR6_Msk (0x1UL << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7_Pos (7U) +#define EXTI_EMR_MR7_Msk (0x1UL << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8_Pos (8U) +#define EXTI_EMR_MR8_Msk (0x1UL << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9_Pos (9U) +#define EXTI_EMR_MR9_Msk (0x1UL << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10_Pos (10U) +#define EXTI_EMR_MR10_Msk (0x1UL << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11_Pos (11U) +#define EXTI_EMR_MR11_Msk (0x1UL << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12_Pos (12U) +#define EXTI_EMR_MR12_Msk (0x1UL << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13_Pos (13U) +#define EXTI_EMR_MR13_Msk (0x1UL << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14_Pos (14U) +#define EXTI_EMR_MR14_Msk (0x1UL << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15_Pos (15U) +#define EXTI_EMR_MR15_Msk (0x1UL << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16_Pos (16U) +#define EXTI_EMR_MR16_Msk (0x1UL << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17_Pos (17U) +#define EXTI_EMR_MR17_Msk (0x1UL << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18_Pos (18U) +#define EXTI_EMR_MR18_Msk (0x1UL << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ + +/* References Defines */ +#define EXTI_EMR_EM0 EXTI_EMR_MR0 +#define EXTI_EMR_EM1 EXTI_EMR_MR1 +#define EXTI_EMR_EM2 EXTI_EMR_MR2 +#define EXTI_EMR_EM3 EXTI_EMR_MR3 +#define EXTI_EMR_EM4 EXTI_EMR_MR4 +#define EXTI_EMR_EM5 EXTI_EMR_MR5 +#define EXTI_EMR_EM6 EXTI_EMR_MR6 +#define EXTI_EMR_EM7 EXTI_EMR_MR7 +#define EXTI_EMR_EM8 EXTI_EMR_MR8 +#define EXTI_EMR_EM9 EXTI_EMR_MR9 +#define EXTI_EMR_EM10 EXTI_EMR_MR10 +#define EXTI_EMR_EM11 EXTI_EMR_MR11 +#define EXTI_EMR_EM12 EXTI_EMR_MR12 +#define EXTI_EMR_EM13 EXTI_EMR_MR13 +#define EXTI_EMR_EM14 EXTI_EMR_MR14 +#define EXTI_EMR_EM15 EXTI_EMR_MR15 +#define EXTI_EMR_EM16 EXTI_EMR_MR16 +#define EXTI_EMR_EM17 EXTI_EMR_MR17 +#define EXTI_EMR_EM18 EXTI_EMR_MR18 + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0_Pos (0U) +#define EXTI_RTSR_TR0_Msk (0x1UL << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1_Pos (1U) +#define EXTI_RTSR_TR1_Msk (0x1UL << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2_Pos (2U) +#define EXTI_RTSR_TR2_Msk (0x1UL << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3_Pos (3U) +#define EXTI_RTSR_TR3_Msk (0x1UL << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4_Pos (4U) +#define EXTI_RTSR_TR4_Msk (0x1UL << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5_Pos (5U) +#define EXTI_RTSR_TR5_Msk (0x1UL << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6_Pos (6U) +#define EXTI_RTSR_TR6_Msk (0x1UL << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7_Pos (7U) +#define EXTI_RTSR_TR7_Msk (0x1UL << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8_Pos (8U) +#define EXTI_RTSR_TR8_Msk (0x1UL << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9_Pos (9U) +#define EXTI_RTSR_TR9_Msk (0x1UL << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10_Pos (10U) +#define EXTI_RTSR_TR10_Msk (0x1UL << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11_Pos (11U) +#define EXTI_RTSR_TR11_Msk (0x1UL << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12_Pos (12U) +#define EXTI_RTSR_TR12_Msk (0x1UL << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13_Pos (13U) +#define EXTI_RTSR_TR13_Msk (0x1UL << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14_Pos (14U) +#define EXTI_RTSR_TR14_Msk (0x1UL << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15_Pos (15U) +#define EXTI_RTSR_TR15_Msk (0x1UL << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16_Pos (16U) +#define EXTI_RTSR_TR16_Msk (0x1UL << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17_Pos (17U) +#define EXTI_RTSR_TR17_Msk (0x1UL << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18_Pos (18U) +#define EXTI_RTSR_TR18_Msk (0x1UL << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 +#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 +#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 +#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 +#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 +#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 +#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 +#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 +#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 +#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 +#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 +#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 +#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 +#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 +#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 +#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 +#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 +#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 +#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0_Pos (0U) +#define EXTI_FTSR_TR0_Msk (0x1UL << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1_Pos (1U) +#define EXTI_FTSR_TR1_Msk (0x1UL << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2_Pos (2U) +#define EXTI_FTSR_TR2_Msk (0x1UL << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3_Pos (3U) +#define EXTI_FTSR_TR3_Msk (0x1UL << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4_Pos (4U) +#define EXTI_FTSR_TR4_Msk (0x1UL << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5_Pos (5U) +#define EXTI_FTSR_TR5_Msk (0x1UL << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6_Pos (6U) +#define EXTI_FTSR_TR6_Msk (0x1UL << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7_Pos (7U) +#define EXTI_FTSR_TR7_Msk (0x1UL << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8_Pos (8U) +#define EXTI_FTSR_TR8_Msk (0x1UL << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9_Pos (9U) +#define EXTI_FTSR_TR9_Msk (0x1UL << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10_Pos (10U) +#define EXTI_FTSR_TR10_Msk (0x1UL << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11_Pos (11U) +#define EXTI_FTSR_TR11_Msk (0x1UL << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12_Pos (12U) +#define EXTI_FTSR_TR12_Msk (0x1UL << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13_Pos (13U) +#define EXTI_FTSR_TR13_Msk (0x1UL << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14_Pos (14U) +#define EXTI_FTSR_TR14_Msk (0x1UL << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15_Pos (15U) +#define EXTI_FTSR_TR15_Msk (0x1UL << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16_Pos (16U) +#define EXTI_FTSR_TR16_Msk (0x1UL << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17_Pos (17U) +#define EXTI_FTSR_TR17_Msk (0x1UL << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18_Pos (18U) +#define EXTI_FTSR_TR18_Msk (0x1UL << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ + +/* References Defines */ +#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 +#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 +#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 +#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 +#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 +#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 +#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 +#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 +#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 +#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 +#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 +#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 +#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 +#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 +#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 +#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 +#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 +#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 +#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0_Pos (0U) +#define EXTI_SWIER_SWIER0_Msk (0x1UL << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1_Pos (1U) +#define EXTI_SWIER_SWIER1_Msk (0x1UL << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2_Pos (2U) +#define EXTI_SWIER_SWIER2_Msk (0x1UL << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3_Pos (3U) +#define EXTI_SWIER_SWIER3_Msk (0x1UL << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4_Pos (4U) +#define EXTI_SWIER_SWIER4_Msk (0x1UL << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5_Pos (5U) +#define EXTI_SWIER_SWIER5_Msk (0x1UL << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6_Pos (6U) +#define EXTI_SWIER_SWIER6_Msk (0x1UL << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7_Pos (7U) +#define EXTI_SWIER_SWIER7_Msk (0x1UL << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8_Pos (8U) +#define EXTI_SWIER_SWIER8_Msk (0x1UL << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9_Pos (9U) +#define EXTI_SWIER_SWIER9_Msk (0x1UL << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10_Pos (10U) +#define EXTI_SWIER_SWIER10_Msk (0x1UL << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11_Pos (11U) +#define EXTI_SWIER_SWIER11_Msk (0x1UL << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12_Pos (12U) +#define EXTI_SWIER_SWIER12_Msk (0x1UL << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13_Pos (13U) +#define EXTI_SWIER_SWIER13_Msk (0x1UL << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14_Pos (14U) +#define EXTI_SWIER_SWIER14_Msk (0x1UL << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15_Pos (15U) +#define EXTI_SWIER_SWIER15_Msk (0x1UL << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16_Pos (16U) +#define EXTI_SWIER_SWIER16_Msk (0x1UL << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17_Pos (17U) +#define EXTI_SWIER_SWIER17_Msk (0x1UL << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18_Pos (18U) +#define EXTI_SWIER_SWIER18_Msk (0x1UL << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ + +/* References Defines */ +#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 +#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 +#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 +#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 +#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 +#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 +#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 +#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 +#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 +#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 +#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 +#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 +#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 +#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 +#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 +#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 +#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 +#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 +#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0_Pos (0U) +#define EXTI_PR_PR0_Msk (0x1UL << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ +#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1_Pos (1U) +#define EXTI_PR_PR1_Msk (0x1UL << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ +#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2_Pos (2U) +#define EXTI_PR_PR2_Msk (0x1UL << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ +#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3_Pos (3U) +#define EXTI_PR_PR3_Msk (0x1UL << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ +#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4_Pos (4U) +#define EXTI_PR_PR4_Msk (0x1UL << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ +#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5_Pos (5U) +#define EXTI_PR_PR5_Msk (0x1UL << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ +#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6_Pos (6U) +#define EXTI_PR_PR6_Msk (0x1UL << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ +#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7_Pos (7U) +#define EXTI_PR_PR7_Msk (0x1UL << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ +#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8_Pos (8U) +#define EXTI_PR_PR8_Msk (0x1UL << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ +#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9_Pos (9U) +#define EXTI_PR_PR9_Msk (0x1UL << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ +#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10_Pos (10U) +#define EXTI_PR_PR10_Msk (0x1UL << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ +#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11_Pos (11U) +#define EXTI_PR_PR11_Msk (0x1UL << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ +#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12_Pos (12U) +#define EXTI_PR_PR12_Msk (0x1UL << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ +#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13_Pos (13U) +#define EXTI_PR_PR13_Msk (0x1UL << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ +#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14_Pos (14U) +#define EXTI_PR_PR14_Msk (0x1UL << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ +#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15_Pos (15U) +#define EXTI_PR_PR15_Msk (0x1UL << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ +#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16_Pos (16U) +#define EXTI_PR_PR16_Msk (0x1UL << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ +#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17_Pos (17U) +#define EXTI_PR_PR17_Msk (0x1UL << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ +#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18_Pos (18U) +#define EXTI_PR_PR18_Msk (0x1UL << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ +#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ + +/* References Defines */ +#define EXTI_PR_PIF0 EXTI_PR_PR0 +#define EXTI_PR_PIF1 EXTI_PR_PR1 +#define EXTI_PR_PIF2 EXTI_PR_PR2 +#define EXTI_PR_PIF3 EXTI_PR_PR3 +#define EXTI_PR_PIF4 EXTI_PR_PR4 +#define EXTI_PR_PIF5 EXTI_PR_PR5 +#define EXTI_PR_PIF6 EXTI_PR_PR6 +#define EXTI_PR_PIF7 EXTI_PR_PR7 +#define EXTI_PR_PIF8 EXTI_PR_PR8 +#define EXTI_PR_PIF9 EXTI_PR_PR9 +#define EXTI_PR_PIF10 EXTI_PR_PR10 +#define EXTI_PR_PIF11 EXTI_PR_PR11 +#define EXTI_PR_PIF12 EXTI_PR_PR12 +#define EXTI_PR_PIF13 EXTI_PR_PR13 +#define EXTI_PR_PIF14 EXTI_PR_PR14 +#define EXTI_PR_PIF15 EXTI_PR_PR15 +#define EXTI_PR_PIF16 EXTI_PR_PR16 +#define EXTI_PR_PIF17 EXTI_PR_PR17 +#define EXTI_PR_PIF18 EXTI_PR_PR18 + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register ******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register *******************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register *******************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_SR_EOS_Pos (1U) +#define ADC_SR_EOS_Msk (0x1UL << ADC_SR_EOS_Pos) /*!< 0x00000002 */ +#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_SR_JEOS_Pos (2U) +#define ADC_SR_JEOS_Msk (0x1UL << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ +#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_SR_JSTRT_Pos (3U) +#define ADC_SR_JSTRT_Msk (0x1UL << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ +#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ +#define ADC_SR_STRT_Pos (4U) +#define ADC_SR_STRT_Msk (0x1UL << ADC_SR_STRT_Pos) /*!< 0x00000010 */ +#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ + +/* Legacy defines */ +#define ADC_SR_EOC (ADC_SR_EOS) +#define ADC_SR_JEOC (ADC_SR_JEOS) + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH_Pos (0U) +#define ADC_CR1_AWDCH_Msk (0x1FUL << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ +#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CR1_AWDCH_0 (0x01UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ +#define ADC_CR1_AWDCH_1 (0x02UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ +#define ADC_CR1_AWDCH_2 (0x04UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ +#define ADC_CR1_AWDCH_3 (0x08UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ +#define ADC_CR1_AWDCH_4 (0x10UL << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ + +#define ADC_CR1_EOSIE_Pos (5U) +#define ADC_CR1_EOSIE_Msk (0x1UL << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ +#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_CR1_AWDIE_Pos (6U) +#define ADC_CR1_AWDIE_Msk (0x1UL << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ +#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_CR1_JEOSIE_Pos (7U) +#define ADC_CR1_JEOSIE_Msk (0x1UL << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ +#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_CR1_SCAN_Pos (8U) +#define ADC_CR1_SCAN_Msk (0x1UL << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ +#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ +#define ADC_CR1_AWDSGL_Pos (9U) +#define ADC_CR1_AWDSGL_Msk (0x1UL << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ +#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CR1_JAUTO_Pos (10U) +#define ADC_CR1_JAUTO_Msk (0x1UL << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ +#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ +#define ADC_CR1_DISCEN_Pos (11U) +#define ADC_CR1_DISCEN_Msk (0x1UL << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ +#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CR1_JDISCEN_Pos (12U) +#define ADC_CR1_JDISCEN_Msk (0x1UL << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ +#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ + +#define ADC_CR1_DISCNUM_Pos (13U) +#define ADC_CR1_DISCNUM_Msk (0x7UL << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ +#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CR1_DISCNUM_0 (0x1UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ +#define ADC_CR1_DISCNUM_1 (0x2UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ +#define ADC_CR1_DISCNUM_2 (0x4UL << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ + +#define ADC_CR1_DUALMOD_Pos (16U) +#define ADC_CR1_DUALMOD_Msk (0xFUL << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ +#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ +#define ADC_CR1_DUALMOD_0 (0x1UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ +#define ADC_CR1_DUALMOD_1 (0x2UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ +#define ADC_CR1_DUALMOD_2 (0x4UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ +#define ADC_CR1_DUALMOD_3 (0x8UL << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ + +#define ADC_CR1_JAWDEN_Pos (22U) +#define ADC_CR1_JAWDEN_Msk (0x1UL << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ +#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CR1_AWDEN_Pos (23U) +#define ADC_CR1_AWDEN_Msk (0x1UL << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ +#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +/* Legacy defines */ +#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) +#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON_Pos (0U) +#define ADC_CR2_ADON_Msk (0x1UL << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ +#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ +#define ADC_CR2_CONT_Pos (1U) +#define ADC_CR2_CONT_Msk (0x1UL << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ +#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CR2_CAL_Pos (2U) +#define ADC_CR2_CAL_Msk (0x1UL << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ +#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ +#define ADC_CR2_RSTCAL_Pos (3U) +#define ADC_CR2_RSTCAL_Msk (0x1UL << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ +#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ +#define ADC_CR2_DMA_Pos (8U) +#define ADC_CR2_DMA_Msk (0x1UL << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ +#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ +#define ADC_CR2_ALIGN_Pos (11U) +#define ADC_CR2_ALIGN_Msk (0x1UL << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ +#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CR2_JEXTSEL_Pos (12U) +#define ADC_CR2_JEXTSEL_Msk (0x7UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ +#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_CR2_JEXTSEL_0 (0x1UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ +#define ADC_CR2_JEXTSEL_1 (0x2UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ +#define ADC_CR2_JEXTSEL_2 (0x4UL << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ + +#define ADC_CR2_JEXTTRIG_Pos (15U) +#define ADC_CR2_JEXTTRIG_Msk (0x1UL << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ +#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ + +#define ADC_CR2_EXTSEL_Pos (17U) +#define ADC_CR2_EXTSEL_Msk (0x7UL << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ +#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CR2_EXTSEL_0 (0x1UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ +#define ADC_CR2_EXTSEL_1 (0x2UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ +#define ADC_CR2_EXTSEL_2 (0x4UL << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ + +#define ADC_CR2_EXTTRIG_Pos (20U) +#define ADC_CR2_EXTTRIG_Msk (0x1UL << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ +#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ +#define ADC_CR2_JSWSTART_Pos (21U) +#define ADC_CR2_JSWSTART_Msk (0x1UL << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ +#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR2_SWSTART_Pos (22U) +#define ADC_CR2_SWSTART_Msk (0x1UL << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ +#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR2_TSVREFE_Pos (23U) +#define ADC_CR2_TSVREFE_Msk (0x1UL << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ +#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10_Pos (0U) +#define ADC_SMPR1_SMP10_Msk (0x7UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR1_SMP10_0 (0x1UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP10_1 (0x2UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP10_2 (0x4UL << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP11_Pos (3U) +#define ADC_SMPR1_SMP11_Msk (0x7UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR1_SMP11_0 (0x1UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP11_1 (0x2UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP11_2 (0x4UL << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP12_Pos (6U) +#define ADC_SMPR1_SMP12_Msk (0x7UL << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR1_SMP12_0 (0x1UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP12_1 (0x2UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP12_2 (0x4UL << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP13_Pos (9U) +#define ADC_SMPR1_SMP13_Msk (0x7UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR1_SMP13_0 (0x1UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP13_1 (0x2UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP13_2 (0x4UL << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP14_Pos (12U) +#define ADC_SMPR1_SMP14_Msk (0x7UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR1_SMP14_0 (0x1UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP14_1 (0x2UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP14_2 (0x4UL << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP15_Pos (15U) +#define ADC_SMPR1_SMP15_Msk (0x7UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR1_SMP15_0 (0x1UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP15_1 (0x2UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP15_2 (0x4UL << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP16_Pos (18U) +#define ADC_SMPR1_SMP16_Msk (0x7UL << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR1_SMP16_0 (0x1UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP16_1 (0x2UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP16_2 (0x4UL << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP17_Pos (21U) +#define ADC_SMPR1_SMP17_Msk (0x7UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR1_SMP17_0 (0x1UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP17_1 (0x2UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP17_2 (0x4UL << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0_Pos (0U) +#define ADC_SMPR2_SMP0_Msk (0x7UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR2_SMP0_0 (0x1UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP0_1 (0x2UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP0_2 (0x4UL << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP1_Pos (3U) +#define ADC_SMPR2_SMP1_Msk (0x7UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR2_SMP1_0 (0x1UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP1_1 (0x2UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP1_2 (0x4UL << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP2_Pos (6U) +#define ADC_SMPR2_SMP2_Msk (0x7UL << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR2_SMP2_0 (0x1UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP2_1 (0x2UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP2_2 (0x4UL << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP3_Pos (9U) +#define ADC_SMPR2_SMP3_Msk (0x7UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR2_SMP3_0 (0x1UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP3_1 (0x2UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP3_2 (0x4UL << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP4_Pos (12U) +#define ADC_SMPR2_SMP4_Msk (0x7UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR2_SMP4_0 (0x1UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP4_1 (0x2UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP4_2 (0x4UL << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP5_Pos (15U) +#define ADC_SMPR2_SMP5_Msk (0x7UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR2_SMP5_0 (0x1UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP5_1 (0x2UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP5_2 (0x4UL << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP6_Pos (18U) +#define ADC_SMPR2_SMP6_Msk (0x7UL << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR2_SMP6_0 (0x1UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP6_1 (0x2UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP6_2 (0x4UL << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP7_Pos (21U) +#define ADC_SMPR2_SMP7_Msk (0x7UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR2_SMP7_0 (0x1UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP7_1 (0x2UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP7_2 (0x4UL << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP8_Pos (24U) +#define ADC_SMPR2_SMP8_Msk (0x7UL << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR2_SMP8_0 (0x1UL << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP8_1 (0x2UL << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP8_2 (0x4UL << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP9_Pos (27U) +#define ADC_SMPR2_SMP9_Msk (0x7UL << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR2_SMP9_0 (0x1UL << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP9_1 (0x2UL << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP9_2 (0x4UL << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1_Pos (0U) +#define ADC_JOFR1_JOFFSET1_Msk (0xFFFUL << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2_Pos (0U) +#define ADC_JOFR2_JOFFSET2_Msk (0xFFFUL << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3_Pos (0U) +#define ADC_JOFR3_JOFFSET3_Msk (0xFFFUL << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4_Pos (0U) +#define ADC_JOFR4_JOFFSET4_Msk (0xFFFUL << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0xFFFUL << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0xFFFUL << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13_Pos (0U) +#define ADC_SQR1_SQ13_Msk (0x1FUL << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ +#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR1_SQ13_0 (0x01UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_SQ13_1 (0x02UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_SQ13_2 (0x04UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_SQ13_3 (0x08UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ +#define ADC_SQR1_SQ13_4 (0x10UL << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ + +#define ADC_SQR1_SQ14_Pos (5U) +#define ADC_SQR1_SQ14_Msk (0x1FUL << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ +#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR1_SQ14_0 (0x01UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ +#define ADC_SQR1_SQ14_1 (0x02UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ14_2 (0x04UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ14_3 (0x08UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ14_4 (0x10UL << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ + +#define ADC_SQR1_SQ15_Pos (10U) +#define ADC_SQR1_SQ15_Msk (0x1FUL << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ +#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR1_SQ15_0 (0x01UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ +#define ADC_SQR1_SQ15_1 (0x02UL << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ +#define ADC_SQR1_SQ15_2 (0x04UL << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ15_3 (0x08UL << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ15_4 (0x10UL << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ + +#define ADC_SQR1_SQ16_Pos (15U) +#define ADC_SQR1_SQ16_Msk (0x1FUL << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ +#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR1_SQ16_0 (0x01UL << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ16_1 (0x02UL << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ +#define ADC_SQR1_SQ16_2 (0x04UL << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ +#define ADC_SQR1_SQ16_3 (0x08UL << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ16_4 (0x10UL << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ + +#define ADC_SQR1_L_Pos (20U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00400000 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7_Pos (0U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ8_Pos (5U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ + +#define ADC_SQR2_SQ9_Pos (10U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ + +#define ADC_SQR2_SQ10_Pos (15U) +#define ADC_SQR2_SQ10_Msk (0x1FUL << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ +#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR2_SQ10_0 (0x01UL << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ10_1 (0x02UL << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ +#define ADC_SQR2_SQ10_2 (0x04UL << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ +#define ADC_SQR2_SQ10_3 (0x08UL << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ10_4 (0x10UL << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ + +#define ADC_SQR2_SQ11_Pos (20U) +#define ADC_SQR2_SQ11_Msk (0x1FUL << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ +#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR2_SQ11_0 (0x01UL << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ11_1 (0x02UL << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ11_2 (0x04UL << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ +#define ADC_SQR2_SQ11_3 (0x08UL << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ +#define ADC_SQR2_SQ11_4 (0x10UL << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ + +#define ADC_SQR2_SQ12_Pos (25U) +#define ADC_SQR2_SQ12_Msk (0x1FUL << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ +#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR2_SQ12_0 (0x01UL << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ12_1 (0x02UL << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ12_2 (0x04UL << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ12_3 (0x08UL << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ +#define ADC_SQR2_SQ12_4 (0x10UL << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1_Pos (0U) +#define ADC_SQR3_SQ1_Msk (0x1FUL << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR3_SQ1_0 (0x01UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ1_1 (0x02UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ1_2 (0x04UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ1_3 (0x08UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ1_4 (0x10UL << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ2_Pos (5U) +#define ADC_SQR3_SQ2_Msk (0x1FUL << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ +#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR3_SQ2_0 (0x01UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_SQR3_SQ2_1 (0x02UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ2_2 (0x04UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ2_3 (0x08UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ2_4 (0x10UL << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ + +#define ADC_SQR3_SQ3_Pos (10U) +#define ADC_SQR3_SQ3_Msk (0x1FUL << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ +#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR3_SQ3_0 (0x01UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_SQR3_SQ3_1 (0x02UL << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ +#define ADC_SQR3_SQ3_2 (0x04UL << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ3_3 (0x08UL << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ3_4 (0x10UL << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ + +#define ADC_SQR3_SQ4_Pos (15U) +#define ADC_SQR3_SQ4_Msk (0x1FUL << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ +#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR3_SQ4_0 (0x01UL << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ4_1 (0x02UL << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ +#define ADC_SQR3_SQ4_2 (0x04UL << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ +#define ADC_SQR3_SQ4_3 (0x08UL << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ4_4 (0x10UL << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ + +#define ADC_SQR3_SQ5_Pos (20U) +#define ADC_SQR3_SQ5_Msk (0x1FUL << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ +#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR3_SQ5_0 (0x01UL << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ5_1 (0x02UL << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ5_2 (0x04UL << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ +#define ADC_SQR3_SQ5_3 (0x08UL << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ +#define ADC_SQR3_SQ5_4 (0x10UL << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ + +#define ADC_SQR3_SQ6_Pos (25U) +#define ADC_SQR3_SQ6_Msk (0x1FUL << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ +#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR3_SQ6_0 (0x01UL << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ6_1 (0x02UL << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ6_2 (0x04UL << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ6_3 (0x08UL << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ +#define ADC_SQR3_SQ6_4 (0x10UL << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1_Pos (0U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ + +#define ADC_JSQR_JSQ2_Pos (5U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ + +#define ADC_JSQR_JSQ3_Pos (10U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ + +#define ADC_JSQR_JSQ4_Pos (15U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JL_Pos (20U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_ADC2DATA_Pos (16U) +#define ADC_DR_ADC2DATA_Msk (0xFFFFUL << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ +#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ + + +/*****************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/*****************************************************************************/ +/******************* Bit definition for TIM_CR1 register *******************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f1xx + * @{ + */ + +#ifndef __STM32F1XX_H +#define __STM32F1XX_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F1) +#define STM32F1 +#endif /* STM32F1 */ + +/* Uncomment the line below according to the target STM32L device used in your + application + */ + +#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \ + !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \ + !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC) + /* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */ + /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */ + /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */ + /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */ + /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ + /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */ + /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */ + /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */ + /* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */ + /* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */ + /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */ + /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */ + /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */ + /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V4.3.2 + */ +#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */ +#define __STM32F1_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ +#define __STM32F1_CMSIS_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */ +#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\ + |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\ + |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\ + |(__STM32F1_CMSIS_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32F100xB) + #include "stm32f100xb.h" +#elif defined(STM32F100xE) + #include "stm32f100xe.h" +#elif defined(STM32F101x6) + #include "stm32f101x6.h" +#elif defined(STM32F101xB) + #include "stm32f101xb.h" +#elif defined(STM32F101xE) + #include "stm32f101xe.h" +#elif defined(STM32F101xG) + #include "stm32f101xg.h" +#elif defined(STM32F102x6) + #include "stm32f102x6.h" +#elif defined(STM32F102xB) + #include "stm32f102xb.h" +#elif defined(STM32F103x6) + #include "stm32f103x6.h" +#elif defined(STM32F103xB) + #include "stm32f103xb.h" +#elif defined(STM32F103xE) + #include "stm32f103xe.h" +#elif defined(STM32F103xG) + #include "stm32f103xg.h" +#elif defined(STM32F105xC) + #include "stm32f105xc.h" +#elif defined(STM32F107xC) + #include "stm32f107xc.h" +#else + #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + SUCCESS = 0U, + ERROR = !SUCCESS +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32f1xx_hal.h" +#endif /* USE_HAL_DRIVER */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F1xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h b/Maple/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h new file mode 100644 index 0000000..8e33366 --- /dev/null +++ b/Maple/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.h + * @author MCD Application Team + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F10X_H +#define __SYSTEM_STM32F10X_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F10x_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F10x_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ +extern const uint8_t AHBPrescTable[16U]; /*!< AHB prescalers table values */ +extern const uint8_t APBPrescTable[8U]; /*!< APB prescalers table values */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F10X_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/CMSIS/Include/cmsis_armcc.h b/Maple/Drivers/CMSIS/Include/cmsis_armcc.h new file mode 100644 index 0000000..7d751fb --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/cmsis_armcc.h @@ -0,0 +1,865 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() do {\ + __schedule_barrier();\ + __isb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() do {\ + __schedule_barrier();\ + __dsb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() do {\ + __schedule_barrier();\ + __dmb(0xF);\ + __schedule_barrier();\ + } while (0U) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/Maple/Drivers/CMSIS/Include/cmsis_armclang.h b/Maple/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..d8031b0 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1869 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF); + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF); + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF); + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ (uint8_t)__builtin_clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Maple/Drivers/CMSIS/Include/cmsis_compiler.h b/Maple/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..79a2cac --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,266 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/Maple/Drivers/CMSIS/Include/cmsis_gcc.h b/Maple/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..1bd41a4 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2085 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.0.4 + * @date 09. April 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ (uint8_t)__builtin_clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/Maple/Drivers/CMSIS/Include/cmsis_iccarm.h b/Maple/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..3c90a2c --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,935 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.0.7 + * @date 19. June 2018 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2018 IAR Systems +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/Maple/Drivers/CMSIS/Include/cmsis_version.h b/Maple/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..ae3f2e3 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.2 + * @date 19. April 2017 + ******************************************************************************/ +/* + * Copyright (c) 2009-2017 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/Maple/Drivers/CMSIS/Include/core_armv8mbl.h b/Maple/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..ec76ab2 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1918 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 22. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_armv8mml.h b/Maple/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..2d0f106 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2927 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 06. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm0.h b/Maple/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..6f82227 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,949 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.5 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm0plus.h b/Maple/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..b9377e8 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1083 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm1.h b/Maple/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..fd1c407 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,976 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 23. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm23.h b/Maple/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..8202a8d --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1993 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 22. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm3.h b/Maple/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..b0dfbd3 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1941 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm33.h b/Maple/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..02f82e2 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,3002 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.0.9 + * @date 06. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_PCS_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm4.h b/Maple/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..308b868 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2129 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_cm7.h b/Maple/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..ada6c2a --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2671 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_INLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_INLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_INLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_INLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_INLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_INLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_INLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_INLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t)addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCIMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCIMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_sc000.h b/Maple/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..9086c64 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1022 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.5 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/core_sc300.h b/Maple/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..665822d --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1915 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + uint32_t RESERVED1[1U]; +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Maple/Drivers/CMSIS/Include/mpu_armv7.h b/Maple/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..7d4b600 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,270 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if non-shareable) or 010b (if shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/Maple/Drivers/CMSIS/Include/mpu_armv8.h b/Maple/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..99ee9f9 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,333 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M MPU + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/Maple/Drivers/CMSIS/Include/tz_context.h b/Maple/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..d4c1474 --- /dev/null +++ b/Maple/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..43cafcb --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3783 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ + +#if defined(STM32L1) + #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the events that can be selected to configure the + * set/reset crossbar of a timer output + */ +#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) +#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) +#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) +#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) +#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) +#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) +#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) +#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) +#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) + +#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) +#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) +#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) +#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) +#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) +#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) +#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) +#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) +#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) + +/** @brief Constants defining the event filtering applied to external events + * by a timer + */ +#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) + #define I2S_IT_TXE I2S_IT_TXP + #define I2S_IT_RXNE I2S_IT_RXP + + #define I2S_FLAG_TXE I2S_FLAG_TXP + #define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) + #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT + +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + + #define SPI_FLAG_TXE SPI_FLAG_TXP + #define SPI_FLAG_RXNE SPI_FLAG_RXP + + #define SPI_IT_TXE SPI_IT_TXP + #define SPI_IT_RXNE SPI_IT_RXP + + #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET + #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET + #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET + #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + + /** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ + /** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + + /** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) + #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h new file mode 100644 index 0000000..6228edb --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h @@ -0,0 +1,358 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_H +#define __STM32F1xx_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_conf.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode + * @brief Freeze/Unfreeze Peripherals in Debug mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @{ + */ + +/* Peripherals on APB1 */ +/** + * @brief TIM2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) + +/** + * @brief TIM3 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) + +#if defined (DBGMCU_CR_DBG_TIM4_STOP) +/** + * @brief TIM4 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM5_STOP) +/** + * @brief TIM5 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM6_STOP) +/** + * @brief TIM6 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM7_STOP) +/** + * @brief TIM7 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM12_STOP) +/** + * @brief TIM12 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM13_STOP) +/** + * @brief TIM13 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM14_STOP) +/** + * @brief TIM14 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) +#endif + +/** + * @brief WWDG Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) + +/** + * @brief IWDG Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) + +/** + * @brief I2C1 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) + +#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) +/** + * @brief I2C2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) +#endif + +#if defined (DBGMCU_CR_DBG_CAN1_STOP) +/** + * @brief CAN1 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_CAN2_STOP) +/** + * @brief CAN2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) +#endif + +/* Peripherals on APB2 */ +#if defined (DBGMCU_CR_DBG_TIM1_STOP) +/** + * @brief TIM1 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM8_STOP) +/** + * @brief TIM8 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM9_STOP) +/** + * @brief TIM9 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM10_STOP) +/** + * @brief TIM10 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM11_STOP) +/** + * @brief TIM11 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) +#endif + + +#if defined (DBGMCU_CR_DBG_TIM15_STOP) +/** + * @brief TIM15 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM16_STOP) +/** + * @brief TIM16 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) +#endif + +#if defined (DBGMCU_CR_DBG_TIM17_STOP) +/** + * @brief TIM17 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) +#endif + +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Functions + * @{ + */ +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Variables HAL Private Variables + * @{ + */ +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h new file mode 100644 index 0000000..ce96197 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h @@ -0,0 +1,410 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_CORTEX_H +#define __STM32F1xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types Cortex Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1U) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk +#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) + +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + + +/* Exported Macros -----------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1U) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1U) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_CORTEX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h new file mode 100644 index 0000000..6ff1109 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h @@ -0,0 +1,210 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_DEF +#define __STM32F1xx_HAL_DEF + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != 0U) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +/** @brief Reset the Handle's State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) +/* Reserved for future use */ +#error "USE_RTOS should be 0 in the current HAL release" +#else +#define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + +#define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif +#ifndef __packed +#define __packed __attribute__((packed)) +#endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4))) +#endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#if defined (__CC_ARM) /* ARM Compiler V5*/ +#define __ALIGN_BEGIN __align(4) +#elif defined (__ICCARM__) /* IAR Compiler */ +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ___STM32F1xx_HAL_DEF */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h new file mode 100644 index 0000000..7b2304d --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h @@ -0,0 +1,457 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_DMA_H +#define __STM32F1xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< no ongoing transfer */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL 0x00000000U /*!< Normal mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ +#define DMA_FLAG_GL1 0x00000001U +#define DMA_FLAG_TC1 0x00000002U +#define DMA_FLAG_HT1 0x00000004U +#define DMA_FLAG_TE1 0x00000008U +#define DMA_FLAG_GL2 0x00000010U +#define DMA_FLAG_TC2 0x00000020U +#define DMA_FLAG_HT2 0x00000040U +#define DMA_FLAG_TE2 0x00000080U +#define DMA_FLAG_GL3 0x00000100U +#define DMA_FLAG_TC3 0x00000200U +#define DMA_FLAG_HT3 0x00000400U +#define DMA_FLAG_TE3 0x00000800U +#define DMA_FLAG_GL4 0x00001000U +#define DMA_FLAG_TC4 0x00002000U +#define DMA_FLAG_HT4 0x00004000U +#define DMA_FLAG_TE4 0x00008000U +#define DMA_FLAG_GL5 0x00010000U +#define DMA_FLAG_TC5 0x00020000U +#define DMA_FLAG_HT5 0x00040000U +#define DMA_FLAG_TE5 0x00080000U +#define DMA_FLAG_GL6 0x00100000U +#define DMA_FLAG_TC6 0x00200000U +#define DMA_FLAG_HT6 0x00400000U +#define DMA_FLAG_TE6 0x00800000U +#define DMA_FLAG_GL7 0x01000000U +#define DMA_FLAG_TC7 0x02000000U +#define DMA_FLAG_HT7 0x04000000U +#define DMA_FLAG_TE7 0x08000000U +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) + + +/* Interrupt & Flag management */ + +/** + * @brief Enables the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__))) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__))) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @brief Return the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__: DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32f1xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h new file mode 100644 index 0000000..d861f50 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h @@ -0,0 +1,277 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_DMA_EX_H +#define __STM32F1xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros + * @{ + */ +/* Interrupt & Flag management */ +#if defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || \ + defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) +/** @defgroup DMAEx_High_density_XL_density_Product_devices DMAEx High density and XL density product devices + * @{ + */ + +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\ + DMA_FLAG_GL5) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\ + (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\ + (DMA1->IFCR = (__FLAG__))) + +/** + * @} + */ + +#else +/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices + * @{ + */ + +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + DMA_FLAG_GL7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || */ + /* STM32F103xG || STM32F105xC || STM32F107xC */ + +#endif /* __STM32F1xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h new file mode 100644 index 0000000..5d3b049 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h @@ -0,0 +1,320 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_EXTI_H +#define STM32F1xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ + +/** + * @brief HAL EXTI common Callback ID enumeration definition + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U +} EXTI_CallbackIDTypeDef; + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ +#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ +#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ +#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ +#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ +#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ +#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ +#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ +#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ +#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ +#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ +#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ +#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ +#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ +#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ +#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ +#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ +#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +#if defined(EXTI_IMR_IM18) +#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB Wakeup from suspend event */ +#endif /* EXTI_IMR_IM18 */ +#if defined(EXTI_IMR_IM19) +#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ +#endif /* EXTI_IMR_IM19 */ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#define EXTI_GPIOD 0x00000003u +#if defined (GPIOE) +#define EXTI_GPIOE 0x00000004u +#endif /* GPIOE */ +#if defined (GPIOF) +#define EXTI_GPIOF 0x00000005u +#endif /* GPIOF */ +#if defined (GPIOG) +#define EXTI_GPIOG 0x00000006u +#endif /* GPIOG */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI bit usage + */ +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#if defined(EXTI_IMR_IM19) +#define EXTI_LINE_NB 20UL +#elif defined(EXTI_IMR_IM18) +#define EXTI_LINE_NB 19UL +#else /* EXTI_IMR_IM17 */ +#define EXTI_LINE_NB 18UL +#endif /* EXTI_IMR_IM19 */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) + +#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__LINE__) ((__LINE__) == EXTI_TRIGGER_RISING_FALLING) + +#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined (GPIOG) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG)) +#elif defined (GPIOF) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF)) +#elif defined (GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD)) +#endif /* GPIOG */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_HAL_EXTI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h new file mode 100644 index 0000000..8cd21b1 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h @@ -0,0 +1,328 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of Flash HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_FLASH_H +#define __STM32F1xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ +/** + * @} + */ + +/** @addtogroup FLASH_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) + +#if defined(FLASH_ACR_LATENCY) +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1) || \ + ((__LATENCY__) == FLASH_LATENCY_2)) + +#else +#define IS_FLASH_LATENCY(__LATENCY__) ((__LATENCY__) == FLASH_LATENCY_0) +#endif /* FLASH_ACR_LATENCY */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0U, + FLASH_PROC_PAGEERASE = 1U, + FLASH_PROC_MASSERASE = 2U, + FLASH_PROC_PROGRAMHALFWORD = 3U, + FLASH_PROC_PROGRAMWORD = 4U, + FLASH_PROC_PROGRAMDOUBLEWORD = 5U +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + + __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */ + + __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ + + __IO uint64_t Data; /*!< Internal variable to save data to be programmed */ + + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + + __IO uint32_t ErrorCode; /*!< FLASH error code + This parameter can be a value of @ref FLASH_Error_Codes */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error_Codes FLASH Error Codes + * @{ + */ + +#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */ +#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */ +#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */ +#define HAL_FLASH_ERROR_OPTV 0x04U /*!< Option validity error */ + +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_HALFWORD 0x01U /*!ACR |= FLASH_ACR_HLFCYA) + +/** + * @brief Disable the FLASH half cycle access. + * @note half cycle access can only be used with a low-frequency clock of less than + 8 MHz that can be obtained with the use of HSI or HSE but not of PLL. + * @retval None + */ +#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA)) + +/** + * @} + */ + +#if defined(FLASH_ACR_LATENCY) +/** @defgroup FLASH_EM_Latency FLASH Latency + * @brief macros to handle FLASH Latency + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * The value of this parameter depend on device used within the same series + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__)) + + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * The value of this parameter depend on device used within the same series + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @} + */ + +#endif /* FLASH_ACR_LATENCY */ +/** @defgroup FLASH_Prefetch FLASH Prefetch + * @brief macros to handle FLASH Prefetch buffer + * @{ + */ +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32f1xx_hal_flash_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); + +/* FLASH IRQ handler function */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +void HAL_FLASH_OB_Launch(void); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +uint32_t HAL_FLASH_GetError(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private function -------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +#if defined(FLASH_BANK2_END) +HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout); +#endif /* FLASH_BANK2_END */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h new file mode 100644 index 0000000..1dcaeed --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h @@ -0,0 +1,786 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of Flash HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_FLASH_EX_H +#define __STM32F1xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/** @addtogroup FLASHEx_Private_Constants + * @{ + */ + +#define FLASH_SIZE_DATA_REGISTER 0x1FFFF7E0U +#define OBR_REG_INDEX 1U +#define SR_FLAG_MASK ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP)) + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))) + +#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE)) + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) + +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) + +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) + +#if defined(FLASH_BANK2_END) +#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET)) +#endif /* FLASH_BANK2_END */ + +/* Low Density */ +#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08007FFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08003FFFU)) +#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ + +/* Medium Density */ +#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFFU)))) +#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ + +/* High Density */ +#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU))) +#endif /* STM32F100xE || STM32F101xE || STM32F103xE */ + +/* XL Density */ +#if defined(FLASH_BANK2_END) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFFU)) +#endif /* FLASH_BANK2_END */ + +/* Connectivity Line */ +#if (defined(STM32F105xC) || defined(STM32F107xC)) +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU) : \ + (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \ + ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU))) +#endif /* STM32F105xC || STM32F107xC */ + +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U)) + +#if defined(FLASH_BANK2_END) +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2) || \ + ((BANK) == FLASH_BANK_BOTH)) +#else +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)) +#endif /* FLASH_BANK2_END */ + +/* Low Density */ +#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : ((ADDRESS) <= 0x08003FFFU))) + +#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ + +/* Medium Density */ +#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \ + ((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \ + ((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFFU))))) + +#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ + +/* High Density */ +#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? \ + ((ADDRESS) <= 0x0805FFFFU) : ((ADDRESS) <= 0x0803FFFFU)))) + +#endif /* STM32F100xE || STM32F101xE || STM32F103xE */ + +/* XL Density */ +#if defined(FLASH_BANK2_END) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? \ + ((ADDRESS) <= FLASH_BANK2_END) : ((ADDRESS) <= 0x080BFFFFU))) + +#endif /* FLASH_BANK2_END */ + +/* Connectivity Line */ +#if (defined(STM32F105xC) || defined(STM32F107xC)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \ + ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \ + ((ADDRESS) <= 0x0801FFFFU) : ((ADDRESS) <= 0x0800FFFFU)))) + +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled + This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END + (x = 1 or 2 depending on devices)*/ + + uint32_t NbPages; /*!< NbPages: Number of pagess to be erased. + This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/ + +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Options bytes program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< OptionType: Option byte to be configured. + This parameter can be a value of @ref FLASHEx_OB_Type */ + + uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_OB_WRP_State */ + + uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected + This parameter can be a value of @ref FLASHEx_OB_Write_Protection */ + + uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level.. + This parameter can be a value of @ref FLASHEx_OB_Read_Protection */ + +#if defined(FLASH_BANK2_END) + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: + IWDG / STOP / STDBY / BOOT1 + This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, + @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */ +#else + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: + IWDG / STOP / STDBY + This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, + @ref FLASHEx_OB_nRST_STDBY */ +#endif /* FLASH_BANK2_END */ + + uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed + This parameter can be a value of @ref FLASHEx_OB_Data_Address */ + + uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ +} FLASH_OBProgramInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Constants FLASH Constants + * @{ + */ + +/** @defgroup FLASHEx_Page_Size Page Size + * @{ + */ +#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) +#define FLASH_PAGE_SIZE 0x400U +#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ + /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ + +#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)) +#define FLASH_PAGE_SIZE 0x800U +#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ + /* STM32F101xG || STM32F103xG */ + /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Type_Erase Type Erase + * @{ + */ +#define FLASH_TYPEERASE_PAGES 0x00U /*!CR, ((__INTERRUPT__) & 0x0000FFFFU)); \ + /* Enable Bank2 IT */ \ + SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \ + } while(0U) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1 + * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1 + * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2 + * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2 + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { \ + /* Disable Bank1 IT */ \ + CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \ + /* Disable Bank2 IT */ \ + CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \ + } while(0U) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 + * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 + * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 + * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 + * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 + * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 + * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 + * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ + (FLASH->OBR & FLASH_OBR_OPTERR) : \ + ((((__FLAG__) & SR_FLAG_MASK) != RESET)? \ + (FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \ + (FLASH->SR2 & ((__FLAG__) >> 16U)))) + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 + * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 + * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 + * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 + * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 + * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 + * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 + * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ + /* Clear FLASH_FLAG_OPTVERR flag */ \ + if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ + { \ + CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ + } \ + else { \ + /* Clear Flag in Bank1 */ \ + if (((__FLAG__) & SR_FLAG_MASK) != RESET) \ + { \ + FLASH->SR = ((__FLAG__) & SR_FLAG_MASK); \ + } \ + /* Clear Flag in Bank2 */ \ + if (((__FLAG__) >> 16U) != RESET) \ + { \ + FLASH->SR2 = ((__FLAG__) >> 16U); \ + } \ + } \ + } while(0U) +#else +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(__INTERRUPT__)) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_BSY FLASH Busy flag + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ + (FLASH->OBR & FLASH_OBR_OPTERR) : \ + (FLASH->SR & (__FLAG__))) +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ + /* Clear FLASH_FLAG_OPTVERR flag */ \ + if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ + { \ + CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ + } \ + else { \ + /* Clear Flag in Bank1 */ \ + FLASH->SR = (__FLAG__); \ + } \ + } while(0U) + +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); + +/** + * @} + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASHEx_OBErase(void); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_FLASH_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h new file mode 100644 index 0000000..2973944 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h @@ -0,0 +1,308 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_GPIO_H +#define STM32F1xx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ + +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode_define */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull_define */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed_define */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0u, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_pins_define GPIO pins define + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK 0x0000FFFFu /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode_define GPIO mode define + * @brief GPIO Configuration Mode + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @{ + */ +#define GPIO_MODE_INPUT 0x00000000u /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP 0x00000001u /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD 0x00000011u /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP 0x00000002u /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD 0x00000012u /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_AF_INPUT GPIO_MODE_INPUT /*!< Alternate Function Input Mode */ + +#define GPIO_MODE_ANALOG 0x00000003u /*!< Analog Mode */ + +#define GPIO_MODE_IT_RISING 0x10110000u /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING 0x10210000u /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING 0x10310000u /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define GPIO_MODE_EVT_RISING 0x10120000u /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING 0x10220000u /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING 0x10320000u /*!< External Event Mode with Rising/Falling edge trigger detection */ + +/** + * @} + */ + +/** @defgroup GPIO_speed_define GPIO speed define + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (GPIO_CRL_MODE0_1) /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM (GPIO_CRL_MODE0_0) /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH (GPIO_CRL_MODE0) /*!< High speed */ + +/** + * @} + */ + +/** @defgroup GPIO_pull_define GPIO pull define + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__: specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending flags. + * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending bits. + * @param __EXTI_LINE__: specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) +/** + * @} + */ + +/* Include GPIO HAL Extension module */ +#include "stm32f1xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) +#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00u) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00u)) +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ + ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ + ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ + ((MODE) == GPIO_MODE_AF_PP) ||\ + ((MODE) == GPIO_MODE_AF_OD) ||\ + ((MODE) == GPIO_MODE_IT_RISING) ||\ + ((MODE) == GPIO_MODE_IT_FALLING) ||\ + ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING) ||\ + ((MODE) == GPIO_MODE_EVT_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_ANALOG)) +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || \ + ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || ((SPEED) == GPIO_SPEED_FREQ_HIGH)) +#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ + ((PULL) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Functions GPIO Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_HAL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h new file mode 100644 index 0000000..56bcb85 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h @@ -0,0 +1,894 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_GPIO_EX_H +#define STM32F1xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration + * @brief This section propose definition to use the Cortex EVENTOUT signal. + * @{ + */ + +/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin + * @{ + */ + +#define AFIO_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */ +#define AFIO_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */ +#define AFIO_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */ +#define AFIO_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */ +#define AFIO_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */ +#define AFIO_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */ +#define AFIO_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */ +#define AFIO_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */ +#define AFIO_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */ +#define AFIO_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */ +#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */ +#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */ +#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */ +#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */ +#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */ +#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */ + +#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \ + ((__PIN__) == AFIO_EVENTOUT_PIN_15)) +/** + * @} + */ + +/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port + * @{ + */ + +#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */ +#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */ +#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */ +#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */ +#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */ + +#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \ + ((__PORT__) == AFIO_EVENTOUT_PORT_E)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping + * @brief This section propose definition to remap the alternate function to some other port/pins. + * @{ + */ + +/** + * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. + * @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5) + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP) + +/** + * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. + * @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7) + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP) + +/** + * @brief Enable the remapping of I2C1 alternate function SCL and SDA. + * @note ENABLE: Remap (SCL/PB8, SDA/PB9) + * @retval None + */ +#define __HAL_AFIO_REMAP_I2C1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP) + +/** + * @brief Disable the remapping of I2C1 alternate function SCL and SDA. + * @note DISABLE: No remap (SCL/PB6, SDA/PB7) + * @retval None + */ +#define __HAL_AFIO_REMAP_I2C1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP) + +/** + * @brief Enable the remapping of USART1 alternate function TX and RX. + * @note ENABLE: Remap (TX/PB6, RX/PB7) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP) + +/** + * @brief Disable the remapping of USART1 alternate function TX and RX. + * @note DISABLE: No remap (TX/PA9, RX/PA10) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP) + +/** + * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. + * @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART2_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP) + +/** + * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. + * @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP) + +/** + * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. + * @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) + * @retval None + */ +#define __HAL_AFIO_REMAP_USART3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) + * @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) + * @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM2_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 + * @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 + * @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) + +/** + * @brief Disable the remapping of TIM3 alternate function channels 1 to 4 + * @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) + * @note TIM3_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) + +/** + * @brief Enable the remapping of TIM4 alternate function channels 1 to 4. + * @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15) + * @note TIM4_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM4_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP) + +/** + * @brief Disable the remapping of TIM4 alternate function channels 1 to 4. + * @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9) + * @note TIM4_ETR on PE0 is not re-mapped. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP) + +#if defined(AFIO_MAPR_CAN_REMAP_REMAP1) + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12 + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN1_1() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP1, AFIO_MAPR_CAN_REMAP) + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package) + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN1_2() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP2, AFIO_MAPR_CAN_REMAP) + +/** + * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. + * @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1 + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN1_3() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP3, AFIO_MAPR_CAN_REMAP) + +#endif + +/** + * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used + * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and + * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available + * on 100-pin and 144-pin packages, no need for remapping). + * @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT. + * @retval None + */ +#define __HAL_AFIO_REMAP_PD01_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP) + +/** + * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used + * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and + * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available + * on 100-pin and 144-pin packages, no need for remapping). + * @note DISABLE: No remapping of PD0 and PD1 + * @retval None + */ +#define __HAL_AFIO_REMAP_PD01_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP) + +#if defined(AFIO_MAPR_TIM5CH4_IREMAP) +/** + * @brief Enable the remapping of TIM5CH4. + * @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose. + * @note This function is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM5CH4_IREMAP) + +/** + * @brief Disable the remapping of TIM5CH4. + * @note DISABLE: TIM5_CH4 is connected to PA3 + * @note This function is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM5CH4_IREMAP) +#endif + +#if defined(AFIO_MAPR_ETH_REMAP) +/** + * @brief Enable the remapping of Ethernet MAC connections with the PHY. + * @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_ETH_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ETH_REMAP) + +/** + * @brief Disable the remapping of Ethernet MAC connections with the PHY. + * @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_ETH_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ETH_REMAP) +#endif + +#if defined(AFIO_MAPR_CAN2_REMAP) + +/** + * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. + * @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN2_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_CAN2_REMAP) + +/** + * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. + * @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_CAN2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_CAN2_REMAP) +#endif + +#if defined(AFIO_MAPR_MII_RMII_SEL) +/** + * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. + * @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_RMII() AFIO_REMAP_ENABLE(AFIO_MAPR_MII_RMII_SEL) + +/** + * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. + * @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_MII() AFIO_REMAP_DISABLE(AFIO_MAPR_MII_RMII_SEL) +#endif + +/** + * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). + * @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) + +/** + * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). + * @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) + +/** + * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). + * @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) + +/** + * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). + * @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) + +#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). + * @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP) + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). + * @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP) +#endif + +#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0. + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP) + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11 + * @retval None + */ +#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP) +#endif + +/** + * @brief Enable the Serial wire JTAG configuration + * @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State + * @retval None + */ +#define __HAL_AFIO_REMAP_SWJ_ENABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET) + +/** + * @brief Enable the Serial wire JTAG configuration + * @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST + * @retval None + */ +#define __HAL_AFIO_REMAP_SWJ_NONJTRST() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST) + +/** + * @brief Enable the Serial wire JTAG configuration + * @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled + * @retval None + */ + +#define __HAL_AFIO_REMAP_SWJ_NOJTAG() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE) + +/** + * @brief Disable the Serial wire JTAG configuration + * @note DISABLE: JTAG-DP Disabled and SW-DP Disabled + * @retval None + */ +#define __HAL_AFIO_REMAP_SWJ_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE) + +#if defined(AFIO_MAPR_SPI3_REMAP) + +/** + * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. + * @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12) + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI3_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_SPI3_REMAP) + +/** + * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. + * @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5). + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_REMAP_SPI3_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI3_REMAP) +#endif + +#if defined(AFIO_MAPR_TIM2ITR1_IREMAP) + +/** + * @brief Control of TIM2_ITR1 internal mapping. + * @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_TIM2ITR1_TO_USB() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM2ITR1_IREMAP) + +/** + * @brief Control of TIM2_ITR1 internal mapping. + * @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_TIM2ITR1_TO_ETH() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM2ITR1_IREMAP) +#endif + +#if defined(AFIO_MAPR_PTP_PPS_REMAP) + +/** + * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note ENABLE: PTP_PPS is output on PB5 pin. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_PTP_PPS_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_PTP_PPS_REMAP) + +/** + * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). + * @note DISABLE: PTP_PPS not output on PB5 pin. + * @note This bit is available only in connectivity line devices and is reserved otherwise. + * @retval None + */ +#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PTP_PPS_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM9_REMAP) + +/** + * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2. + * @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM9_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) + +/** + * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2. + * @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM10_REMAP) + +/** + * @brief Enable the remapping of TIM10_CH1. + * @note ENABLE: Remap (TIM10_CH1 on PF6). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM10_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) + +/** + * @brief Disable the remapping of TIM10_CH1. + * @note DISABLE: No remap (TIM10_CH1 on PB8). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM11_REMAP) +/** + * @brief Enable the remapping of TIM11_CH1. + * @note ENABLE: Remap (TIM11_CH1 on PF7). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM11_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) + +/** + * @brief Disable the remapping of TIM11_CH1. + * @note DISABLE: No remap (TIM11_CH1 on PB9). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM13_REMAP) + +/** + * @brief Enable the remapping of TIM13_CH1. + * @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM13_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) + +/** + * @brief Disable the remapping of TIM13_CH1. + * @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM14_REMAP) + +/** + * @brief Enable the remapping of TIM14_CH1. + * @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM14_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) + +/** + * @brief Disable the remapping of TIM14_CH1. + * @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) +#endif + +#if defined(AFIO_MAPR2_FSMC_NADV_REMAP) + +/** + * @brief Controls the use of the optional FSMC_NADV signal. + * @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral. + * @retval None + */ +#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) + +/** + * @brief Controls the use of the optional FSMC_NADV signal. + * @note CONNECTED: The NADV signal is connected to the output (default). + * @retval None + */ +#define __HAL_AFIO_FSMCNADV_CONNECTED() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM15_REMAP) + +/** + * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2. + * @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM15_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) + +/** + * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2. + * @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM16_REMAP) + +/** + * @brief Enable the remapping of TIM16_CH1. + * @note ENABLE: Remap (TIM16_CH1 on PA6). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM16_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) + +/** + * @brief Disable the remapping of TIM16_CH1. + * @note DISABLE: No remap (TIM16_CH1 on PB8). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM17_REMAP) + +/** + * @brief Enable the remapping of TIM17_CH1. + * @note ENABLE: Remap (TIM17_CH1 on PA7). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM17_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) + +/** + * @brief Disable the remapping of TIM17_CH1. + * @note DISABLE: No remap (TIM17_CH1 on PB9). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) +#endif + +#if defined(AFIO_MAPR2_CEC_REMAP) + +/** + * @brief Enable the remapping of CEC. + * @note ENABLE: Remap (CEC on PB10). + * @retval None + */ +#define __HAL_AFIO_REMAP_CEC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) + +/** + * @brief Disable the remapping of CEC. + * @note DISABLE: No remap (CEC on PB8). + * @retval None + */ +#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM1_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. + * @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. + * @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3). + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. + * @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) + +/** + * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. + * @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4) + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) +#endif + +#if defined(AFIO_MAPR2_TIM12_REMAP) + +/** + * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2. + * @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13). + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM12_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) + +/** + * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2. + * @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5). + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) +#endif + +#if defined(AFIO_MAPR2_MISC_REMAP) + +/** + * @brief Miscellaneous features remapping. + * This bit is set and cleared by software. It controls miscellaneous features. + * The DMA2 channel 5 interrupt position in the vector table. + * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). + * @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is + * selected as DAC Trigger 3, TIM15 triggers TIM1/3. + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_MISC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) + +/** + * @brief Miscellaneous features remapping. + * This bit is set and cleared by software. It controls miscellaneous features. + * The DMA2 channel 5 interrupt position in the vector table. + * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). + * @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO + * event is selected as DAC Trigger 3, TIM5 triggers TIM1/3. + * @note This bit is available only in high density value line devices. + * @retval None + */ +#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros + * @{ + */ +#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :3uL) +#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :4uL) +#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :6uL) +#endif + +#define AFIO_REMAP_ENABLE(REMAP_PIN) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg |= AFIO_MAPR_SWJ_CFG; \ + tmpreg |= REMAP_PIN; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +#define AFIO_REMAP_DISABLE(REMAP_PIN) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg |= AFIO_MAPR_SWJ_CFG; \ + tmpreg &= ~REMAP_PIN; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +#define AFIO_REMAP_PARTIAL(REMAP_PIN, REMAP_PIN_MASK) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg &= ~REMAP_PIN_MASK; \ + tmpreg |= AFIO_MAPR_SWJ_CFG; \ + tmpreg |= REMAP_PIN; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +#define AFIO_DBGAFR_CONFIG(DBGAFR_SWJCFG) do{ uint32_t tmpreg = AFIO->MAPR; \ + tmpreg &= ~AFIO_MAPR_SWJ_CFG_Msk; \ + tmpreg |= DBGAFR_SWJCFG; \ + AFIO->MAPR = tmpreg; \ + }while(0u) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup GPIOEx_Exported_Functions + * @{ + */ + +/** @addtogroup GPIOEx_Exported_Functions_Group1 + * @{ + */ +void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource); +void HAL_GPIOEx_EnableEventout(void); +void HAL_GPIOEx_DisableEventout(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_HAL_GPIO_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h new file mode 100644 index 0000000..e44d97d --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h @@ -0,0 +1,1051 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_PCD_H +#define STM32F1xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_usb.h" + +#if defined (USB) || defined (USB_OTG_FS) + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +#if defined (USB) + +#endif /* defined (USB) */ +#if defined (USB_OTG_FS) +typedef USB_OTG_GlobalTypeDef PCD_TypeDef; +typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; +typedef USB_OTG_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +typedef USB_TypeDef PCD_TypeDef; +typedef USB_CfgTypeDef PCD_InitTypeDef; +typedef USB_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB) */ + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ +#if defined (USB_OTG_FS) + PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) + PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ +#endif /* defined (USB) */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32f1xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#if defined (USB_OTG_FS) +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) +#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + + +#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK) + +#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK + +#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ + } while(0U) +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= (uint16_t)(~(__INTERRUPT__))) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE +#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ + } while(0U) + +#endif /* defined (USB) */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); +void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type); + +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + + +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ +#if defined (USB_OTG_FS) +#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +#define USB_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ +#endif /* defined (USB) */ + +/** + * @} + */ +#if defined (USB) +/** @defgroup PCD_EP0_MPS PCD EP0 MPS + * @{ + */ +#define PCD_EP0MPS_64 EP_MPS_64 +#define PCD_EP0MPS_32 EP_MPS_32 +#define PCD_EP0MPS_16 EP_MPS_16 +#define PCD_EP0MPS_08 EP_MPS_8 +/** + * @} + */ + +/** @defgroup PCD_ENDP PCD ENDP + * @{ + */ +#define PCD_ENDP0 0U +#define PCD_ENDP1 1U +#define PCD_ENDP2 2U +#define PCD_ENDP3 3U +#define PCD_ENDP4 4U +#define PCD_ENDP5 5U +#define PCD_ENDP6 6U +#define PCD_ENDP7 7U +/** + * @} + */ + +/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind + * @{ + */ +#define PCD_SNG_BUF 0U +#define PCD_DBL_BUF 1U +/** + * @} + */ +#endif /* defined (USB) */ +/** + * @} + */ + +#if defined (USB_OTG_FS) +#ifndef USB_OTG_DOEPINT_OTEPSPR +#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ +#endif + +#ifndef USB_OTG_DOEPMSK_OTEPSPRM +#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ +#endif + +#ifndef USB_OTG_DOEPINT_NAK +#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ +#endif + +#ifndef USB_OTG_DOEPMSK_NAKM +#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ +#endif + +#ifndef USB_OTG_DOEPINT_STPKTRX +#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ +#endif + +#ifndef USB_OTG_DOEPMSK_NYETM +#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ +#endif +#endif /* defined (USB_OTG_FS) */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#if defined (USB) +/******************** Bit definition for USB_COUNTn_RX register *************/ +#define USB_CNTRX_NBLK_MSK (0x1FU << 10) +#define USB_CNTRX_BLSIZE (0x1U << 15) + +/* SetENDPOINT */ +#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue)) + +/* GetENDPOINT */ +#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U))) + +/* ENDPOINT transfer */ +#define USB_EP0StartXfer USB_EPStartXfer + +/** + * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wType Endpoint Type. + * @retval None + */ +#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX))) + +/** + * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval Endpoint Type + */ +#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpNum, bDir + * @retval None + */ +#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT double buffered endpoint */ \ + PCD_TX_DTOG((USBx), (bEpNum)); \ + } \ + else if ((bDir) == 1U) \ + { \ + /* IN double buffered endpoint */ \ + PCD_RX_DTOG((USBx), (bEpNum)); \ + } \ + } while(0) + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_EPTX_DTOG1 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPTX_DTOG2 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_TX_STATUS */ + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_EPRX_DTOG1 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPRX_DTOG2 & (wState))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_RX_STATUS */ + +/** + * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wStaterx new state. + * @param wStatetx new state. + * @retval None + */ +#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \ + /* toggle first bit ? */ \ + if ((USB_EPRX_DTOG1 & (wStaterx))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + /* toggle first bit ? */ \ + if ((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_TXRX_STATUS */ + +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval status + */ +#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) +#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) + +/** + * @brief sets directly the VALID tx/rx-status into the endpoint register + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) +#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) + +/** + * @brief checks stall condition in an endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval TRUE = endpoint in stall condition. + */ +#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) == USB_EP_TX_STALL) +#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) == USB_EP_RX_STALL) + +/** + * @brief set & clear EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_KIND(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \ + } while(0) /* PCD_SET_EP_KIND */ + +#define PCD_CLEAR_EP_KIND(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_CLEAR_EP_KIND */ + +/** + * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \ + } while(0) /* PCD_CLEAR_RX_EP_CTR */ + +#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX)); \ + } while(0) /* PCD_CLEAR_TX_EP_CTR */ + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_RX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wEPVal; \ + \ + _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \ + } while(0) /* PCD_RX_DTOG */ + +#define PCD_TX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wEPVal; \ + \ + _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_TX)); \ + } while(0) /* PCD_TX_DTOG */ +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ + \ + if ((_wRegVal & USB_EP_DTOG_RX) != 0U)\ + { \ + PCD_RX_DTOG((USBx), (bEpNum)); \ + } \ + } while(0) /* PCD_CLEAR_RX_DTOG */ + +#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ + \ + if ((_wRegVal & USB_EP_DTOG_TX) != 0U)\ + { \ + PCD_TX_DTOG((USBx), (bEpNum)); \ + } \ + } while(0) /* PCD_CLEAR_TX_DTOG */ + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) \ + do { \ + uint16_t _wRegVal; \ + \ + _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \ + \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } while(0) /* PCD_SET_EP_ADDRESS */ + +/** + * @brief Gets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) + +#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) +#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) + +/** + * @brief sets address of the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wAddr address to be set (must be word aligned). + * @retval None + */ +#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) \ + do { \ + __IO uint16_t *_wRegVal; \ + uint32_t _wRegBase = (uint32_t)USBx; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \ + *_wRegVal = ((wAddr) >> 1) << 1; \ + } while(0) /* PCD_SET_EP_TX_ADDRESS */ + +#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) \ + do { \ + __IO uint16_t *_wRegVal; \ + uint32_t _wRegBase = (uint32_t)USBx; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \ + *_wRegVal = ((wAddr) >> 1) << 1; \ + } while(0) /* PCD_SET_EP_RX_ADDRESS */ + +/** + * @brief Gets address of the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval address of the buffer. + */ +#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Sets counter of rx buffer with no. of blocks. + * @param pdwReg Register pointer + * @param wCount Counter. + * @param wNBlocks no. of Blocks. + * @retval None + */ +#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ + do { \ + (wNBlocks) = (wCount) >> 5; \ + if (((wCount) & 0x1fU) == 0U) \ + { \ + (wNBlocks)--; \ + } \ + *(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \ + } while(0) /* PCD_CALC_BLK32 */ + +#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ + do { \ + (wNBlocks) = (wCount) >> 1; \ + if (((wCount) & 0x1U) != 0U) \ + { \ + (wNBlocks)++; \ + } \ + *(pdwReg) = (uint16_t)((wNBlocks) << 10); \ + } while(0) /* PCD_CALC_BLK2 */ + +#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \ + do { \ + uint32_t wNBlocks; \ + if ((wCount) == 0U) \ + { \ + *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \ + *(pdwReg) |= USB_CNTRX_BLSIZE; \ + } \ + else if((wCount) <= 62U) \ + { \ + PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ + } \ + else \ + { \ + PCD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ + } \ + } while(0) /* PCD_SET_EP_CNT_RX_REG */ + +#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) \ + do { \ + uint32_t _wRegBase = (uint32_t)(USBx); \ + __IO uint16_t *pdwReg; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + pdwReg = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ + PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \ + } while(0) + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) \ + do { \ + uint32_t _wRegBase = (uint32_t)(USBx); \ + __IO uint16_t *_wRegVal; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ + *_wRegVal = (uint16_t)(wCount); \ + } while(0) + +#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) \ + do { \ + uint32_t _wRegBase = (uint32_t)(USBx); \ + __IO uint16_t *_wRegVal; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ + PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \ + } while(0) + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval Counter value + */ +#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU) +#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU) + +/** + * @brief Sets buffer 0/1 address in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wBuf0Addr buffer 0 address. + * @retval Counter value + */ +#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) \ + do { \ + PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \ + } while(0) /* PCD_SET_EP_DBUF0_ADDR */ + +#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) \ + do { \ + PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \ + } while(0) /* PCD_SET_EP_DBUF1_ADDR */ + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) \ + do { \ + PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \ + PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \ + } while(0) /* PCD_SET_EP_DBUF_ADDR */ + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + /* OUT endpoint */ \ + { \ + PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + PCD_SET_EP_TX_CNT((USBx), (bEpNum), (wCount)); \ + } \ + } \ + } while(0) /* SetEPDblBuf0Count*/ + +#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ + uint32_t _wBase = (uint32_t)(USBx); \ + __IO uint16_t *_wEPRegVal; \ + \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + PCD_SET_EP_RX_CNT((USBx), (bEpNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + _wBase += (uint32_t)(USBx)->BTABLE; \ + _wEPRegVal = (__IO uint16_t *)(_wBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ + *_wEPRegVal = (uint16_t)(wCount); \ + } \ + } \ + } while(0) /* SetEPDblBuf1Count */ + +#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ + PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + } while(0) /* PCD_SET_EP_DBUF_CNT */ + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) + +#endif /* defined (USB) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_HAL_PCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h new file mode 100644 index 0000000..ed14bc2 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h @@ -0,0 +1,88 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_PCD_EX_H +#define STM32F1xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +#if defined (USB) || defined (USB_OTG_FS) +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + +#if defined (USB_OTG_FS) +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress); + +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); +#endif /* defined (USB) */ +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F1xx_HAL_PCD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h new file mode 100644 index 0000000..2b1b4ed --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h @@ -0,0 +1,388 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_PWR_H +#define __STM32F1xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value of @ref PWR_PVD_detection_level */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode */ +}PWR_PVDTypeDef; + + +/** + * @} + */ + + +/* Internal constants --------------------------------------------------------*/ + +/** @addtogroup PWR_Private_Constants + * @{ + */ + +#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level PWR PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2 +#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3 +#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4 +#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5 +#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6 +#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7 +#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8 +#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9 + +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ + +/** + * @} + */ + + +/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins + * @{ + */ + +#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP + +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON 0x00000000U +#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS + +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) + +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01) +#define PWR_STOPENTRY_WFE ((uint8_t)0x02) + +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Flag + * @{ + */ +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @brief Check PWR flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event + * was received from the WKUP pin or from the RTC alarm + * An additional wakeup event is detected if the WKUP pin is enabled + * (by setting the EWUP bit) when the WKUP pin level is already high. + * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was + * resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled + * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode + * For this reason, this bit is equal to 0 after Standby or reset + * until the PVDE bit is set. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the PWR's pending flags. + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2)) + +/** + * @brief Enable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) + + +/** + * @brief PVD EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + + +/** + * @brief PVD EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief PVD EXTI line configuration: set rising & falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) + + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_NORMAL)) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +/* #define HAL_PWR_ConfigPVD 12*/ +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + + + +void HAL_PWR_PVD_IRQHandler(void); +void HAL_PWR_PVDCallback(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F1xx_HAL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h new file mode 100644 index 0000000..f0097cb --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h @@ -0,0 +1,1378 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_RCC_H +#define __STM32F1xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< PLLState: The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock + This parameter must be a value of @ref RCCEx_PLL_Multiplication_Factor */ +} RCC_PLLInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ + +#define RCC_PLLSOURCE_HSI_DIV2 0x00000000U /*!< HSI clock divided by 2 selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC /*!< HSE clock selected as PLL entry clock source */ + +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U +#define RCC_OSCILLATORTYPE_HSE 0x00000001U +#define RCC_OSCILLATORTYPE_HSI 0x00000002U +#define RCC_OSCILLATORTYPE_LSE 0x00000004U +#define RCC_OSCILLATORTYPE_LSI 0x00000008U +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */ + +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT 0x10U /* Default HSI calibration trimming value */ + +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ + +/** + * @} + */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL is not configured */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NO_CLK 0x00000000U /*!< No clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV128 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 128 used as RTC clock */ +/** + * @} + */ + + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ + +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 0x00000000U + +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ +#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos)) /*!< Internal High Speed clock ready flag */ +#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos)) /*!< External High Speed clock ready flag */ +#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos)) /*!< PLL clock ready flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos)) /*!< Internal Low Speed oscillator Ready */ +#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos)) /*!< PIN reset flag */ +#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_Pos)) /*!< POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos)) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos)) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos)) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos)) /*!< Low-Power reset flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos)) /*!< External Low Speed oscillator Ready */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) +#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN)) +#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET) +#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET) +#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) +#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_BKP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) + +#define __HAL_RCC_BKP_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_BKPEN)) +#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) +#define __HAL_RCC_BKP_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) != RESET) +#define __HAL_RCC_BKP_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_AFIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_AFIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_AFIOEN)) +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPAEN)) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPBEN)) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPCEN)) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPDEN)) +#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) + +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_AFIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) != RESET) +#define __HAL_RCC_AFIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) == RESET) +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) != RESET) +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) + +#define __HAL_RCC_BKP_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_BKPRST)) +#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00) +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) + +#define __HAL_RCC_BKP_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_BKPRST)) +#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AFIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_AFIORST)) +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPARST)) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPBRST)) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPCRST)) +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPDRST)) +#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) + +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00) +#define __HAL_RCC_AFIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_AFIORST)) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPARST)) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPBRST)) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPCRST)) +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPDRST)) +#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) + +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) + +/** + * @} + */ + +/** @defgroup RCC_HSI_Configuration HSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) +#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ + (MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_Pos)) + +/** + * @} + */ + +/** @defgroup RCC_LSI_Configuration LSI Configuration + * @{ + */ + +/** @brief Macro to enable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + */ +#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) + +/** @brief Macro to disable the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) + +/** + * @} + */ + +/** @defgroup RCC_HSE_Configuration HSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON turn ON the HSE oscillator + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + }while(0U) + +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if ((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if ((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + }while(0U) + +/** + * @} + */ + +/** @defgroup RCC_PLL_Configuration PLL Configuration + * @{ + */ + +/** @brief Macro to enable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) + +/** @brief Macro to disable the main PLL. + * @note The main PLL can not be disabled if it is used as system clock source + */ +#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) + +/** @brief Macro to configure the main PLL clock source and multiplication factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_MUL4 PLLVCO = PLL clock entry x 4 + * @arg @ref RCC_PLL_MUL6 PLLVCO = PLL clock entry x 6 + @if STM32F105xC + * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5 + @elseif STM32F107xC + * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5 + @else + * @arg @ref RCC_PLL_MUL2 PLLVCO = PLL clock entry x 2 + * @arg @ref RCC_PLL_MUL3 PLLVCO = PLL clock entry x 3 + * @arg @ref RCC_PLL_MUL10 PLLVCO = PLL clock entry x 10 + * @arg @ref RCC_PLL_MUL11 PLLVCO = PLL clock entry x 11 + * @arg @ref RCC_PLL_MUL12 PLLVCO = PLL clock entry x 12 + * @arg @ref RCC_PLL_MUL13 PLLVCO = PLL clock entry x 13 + * @arg @ref RCC_PLL_MUL14 PLLVCO = PLL clock entry x 14 + * @arg @ref RCC_PLL_MUL15 PLLVCO = PLL clock entry x 15 + * @arg @ref RCC_PLL_MUL16 PLLVCO = PLL clock entry x 16 + @endif + * @arg @ref RCC_PLL_MUL8 PLLVCO = PLL clock entry x 8 + * @arg @ref RCC_PLL_MUL9 PLLVCO = PLL clock entry x 9 + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLMUL__)\ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL),((__RCC_PLLSOURCE__) | (__PLLMUL__) )) + +/** @brief Get oscillator clock selected as PLL input clock + * @retval The clock source used for PLL entry. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL input clock + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) + +/** + * @} + */ + +/** @defgroup RCC_Get_Clock_source Get Clock source + * @{ + */ + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR,RCC_CFGR_SWS))) + +/** + * @} + */ + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +#if defined(RCC_CFGR_MCO_3) +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected by 2 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected (for Ethernet) as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected (for Ethernet) as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source + */ +#else +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source + */ +#endif + +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__)) + + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration +* @{ +*/ + +/** @brief Macro to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it can't be changed unless the + * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + +/** @brief Macro to get the RTC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macro to enable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) + +/** @brief Macro to disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) + +/** @brief Macro to force the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) + +/** @brief Macros to release the Backup domain reset. + */ +#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + * @arg @ref RCC_IT_CSS Clock Security System interrupt + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + @if STM32F105xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @elsif STM32F107xx + * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. + * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. + @endif + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)RCC_CSR_RMVF_BB = ENABLE) + +/** @brief Check RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. + @if STM32F105xx + * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready. + * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready. + @elsif STM32F107xx + * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready. + * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready. + @endif + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. + * @arg @ref RCC_FLAG_PINRST Pin reset. + * @arg @ref RCC_FLAG_PORRST POR/PDR reset. + * @arg @ref RCC_FLAG_SFTRST Software reset. + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. + * @arg @ref RCC_FLAG_LPWRRST Low Power reset. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX)? RCC->BDCR : \ + RCC->CSR)) & (1U << ((__FLAG__) & RCC_FLAG_MASK))) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32f1xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); + +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_Private_Constants + * @{ + */ + +/** @defgroup RCC_Timeout RCC Timeout + * @{ + */ + +/* Disable Backup domain write protection state change timeout */ +#define RCC_DBP_TIMEOUT_VALUE 100U /* 100 ms */ +/* LSE state change timeout */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +#define CLOCKSWITCH_TIMEOUT_VALUE 5000 /* 5 s */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ + +/** + * @} + */ + +/** @defgroup RCC_Register_Offset Register offsets + * @{ + */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +#define RCC_CR_OFFSET 0x00U +#define RCC_CFGR_OFFSET 0x04U +#define RCC_CIR_OFFSET 0x08U +#define RCC_BDCR_OFFSET 0x20U +#define RCC_CSR_OFFSET 0x24U + +/** + * @} + */ + +/** @defgroup RCC_BitAddress_AliasRegion BitAddress AliasRegion + * @brief RCC registers bit address in the alias region + * @{ + */ +#define RCC_CR_OFFSET_BB (RCC_OFFSET + RCC_CR_OFFSET) +#define RCC_CFGR_OFFSET_BB (RCC_OFFSET + RCC_CFGR_OFFSET) +#define RCC_CIR_OFFSET_BB (RCC_OFFSET + RCC_CIR_OFFSET) +#define RCC_BDCR_OFFSET_BB (RCC_OFFSET + RCC_BDCR_OFFSET) +#define RCC_CSR_OFFSET_BB (RCC_OFFSET + RCC_CSR_OFFSET) + +/* --- CR Register ---*/ +/* Alias word address of HSION bit */ +#define RCC_HSION_BIT_NUMBER RCC_CR_HSION_Pos +#define RCC_CR_HSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSION_BIT_NUMBER * 4U))) +/* Alias word address of HSEON bit */ +#define RCC_HSEON_BIT_NUMBER RCC_CR_HSEON_Pos +#define RCC_CR_HSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSEON_BIT_NUMBER * 4U))) +/* Alias word address of CSSON bit */ +#define RCC_CSSON_BIT_NUMBER RCC_CR_CSSON_Pos +#define RCC_CR_CSSON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_CSSON_BIT_NUMBER * 4U))) +/* Alias word address of PLLON bit */ +#define RCC_PLLON_BIT_NUMBER RCC_CR_PLLON_Pos +#define RCC_CR_PLLON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_PLLON_BIT_NUMBER * 4U))) + +/* --- CSR Register ---*/ +/* Alias word address of LSION bit */ +#define RCC_LSION_BIT_NUMBER RCC_CSR_LSION_Pos +#define RCC_CSR_LSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_LSION_BIT_NUMBER * 4U))) + +/* Alias word address of RMVF bit */ +#define RCC_RMVF_BIT_NUMBER RCC_CSR_RMVF_Pos +#define RCC_CSR_RMVF_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_RMVF_BIT_NUMBER * 4U))) + +/* --- BDCR Registers ---*/ +/* Alias word address of LSEON bit */ +#define RCC_LSEON_BIT_NUMBER RCC_BDCR_LSEON_Pos +#define RCC_BDCR_LSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEON_BIT_NUMBER * 4U))) + +/* Alias word address of LSEON bit */ +#define RCC_LSEBYP_BIT_NUMBER RCC_BDCR_LSEBYP_Pos +#define RCC_BDCR_LSEBYP_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEBYP_BIT_NUMBER * 4U))) + +/* Alias word address of RTCEN bit */ +#define RCC_RTCEN_BIT_NUMBER RCC_BDCR_RTCEN_Pos +#define RCC_BDCR_RTCEN_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U))) + +/* Alias word address of BDRST bit */ +#define RCC_BDRST_BIT_NUMBER RCC_BDCR_BDRST_Pos +#define RCC_BDCR_BDRST_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_BDRST_BIT_NUMBER * 4U))) + +/** + * @} + */ + +/* CR register byte 2 (Bits[23:16]) base address */ +#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U)) + +/* CIR register byte 1 (Bits[15:8]) base address */ +#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U)) + +/* CIR register byte 2 (Bits[23:16]) base address */ +#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U)) + +/* Defines used for Flags */ +#define CR_REG_INDEX ((uint8_t)1) +#define BDCR_REG_INDEX ((uint8_t)2) +#define CSR_REG_INDEX ((uint8_t)3) + +#define RCC_FLAG_MASK ((uint8_t)0x1F) + +/** + * @} + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +/** @defgroup RCC_Alias_For_Legacy Alias define maintained for legacy + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __HAL_RCC_SYSCFG_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __HAL_RCC_SYSCFG_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __HAL_RCC_SYSCFG_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +/** + * @} + */ + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI_DIV2) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) +#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU) +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ + (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ + (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \ + (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)) +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) +#define IS_RCC_SYSCLKSOURCE_STATUS(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)) +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) +#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1)) +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV128)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h new file mode 100644 index 0000000..d0d0830 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h @@ -0,0 +1,1908 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_RCC_EX_H +#define __STM32F1xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/** @addtogroup RCCEx_Private_Constants + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + +/* Alias word address of PLLI2SON bit */ +#define PLLI2SON_BITNUMBER RCC_CR_PLL3ON_Pos +#define RCC_CR_PLLI2SON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (PLLI2SON_BITNUMBER * 4U))) +/* Alias word address of PLL2ON bit */ +#define PLL2ON_BITNUMBER RCC_CR_PLL2ON_Pos +#define RCC_CR_PLL2ON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (PLL2ON_BITNUMBER * 4U))) + +#define PLLI2S_TIMEOUT_VALUE 100U /* 100 ms */ +#define PLL2_TIMEOUT_VALUE 100U /* 100 ms */ + +#endif /* STM32F105xC || STM32F107xC */ + + +#define CR_REG_INDEX ((uint8_t)1) + +/** + * @} + */ + +/** @addtogroup RCCEx_Private_Macros + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define IS_RCC_PREDIV1_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_PREDIV1_SOURCE_HSE) || \ + ((__SOURCE__) == RCC_PREDIV1_SOURCE_PLL2)) +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV3) || ((__DIV__) == RCC_HSE_PREDIV_DIV4) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV5) || ((__DIV__) == RCC_HSE_PREDIV_DIV6) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV7) || ((__DIV__) == RCC_HSE_PREDIV_DIV8) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV9) || ((__DIV__) == RCC_HSE_PREDIV_DIV10) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV11) || ((__DIV__) == RCC_HSE_PREDIV_DIV12) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV13) || ((__DIV__) == RCC_HSE_PREDIV_DIV14) || \ + ((__DIV__) == RCC_HSE_PREDIV_DIV15) || ((__DIV__) == RCC_HSE_PREDIV_DIV16)) + +#else +#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2)) +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ + ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ + ((__MUL__) == RCC_PLL_MUL6_5)) + +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_PLL2CLK) || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK_DIV2) || ((__SOURCE__) == RCC_MCO1SOURCE_EXT_HSE) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK)) + +#else +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \ + ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ + ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ + ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \ + ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \ + ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \ + ((__MUL__) == RCC_PLL_MUL16)) + +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \ + || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK)) + +#endif /* STM32F105xC || STM32F107xC*/ + +#define IS_RCC_ADCPLLCLK_DIV(__ADCCLK__) (((__ADCCLK__) == RCC_ADCPCLK2_DIV2) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV4) || \ + ((__ADCCLK__) == RCC_ADCPCLK2_DIV6) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV8)) + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLLI2S_VCO)) + +#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S3CLKSOURCE_PLLI2S_VCO)) + +#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV2) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV3)) + +#define IS_RCC_PLLI2S_MUL(__MUL__) (((__MUL__) == RCC_PLLI2S_MUL8) || ((__MUL__) == RCC_PLLI2S_MUL9) || \ + ((__MUL__) == RCC_PLLI2S_MUL10) || ((__MUL__) == RCC_PLLI2S_MUL11) || \ + ((__MUL__) == RCC_PLLI2S_MUL12) || ((__MUL__) == RCC_PLLI2S_MUL13) || \ + ((__MUL__) == RCC_PLLI2S_MUL14) || ((__MUL__) == RCC_PLLI2S_MUL16) || \ + ((__MUL__) == RCC_PLLI2S_MUL20)) + +#define IS_RCC_HSE_PREDIV2(__DIV__) (((__DIV__) == RCC_HSE_PREDIV2_DIV1) || ((__DIV__) == RCC_HSE_PREDIV2_DIV2) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV3) || ((__DIV__) == RCC_HSE_PREDIV2_DIV4) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV5) || ((__DIV__) == RCC_HSE_PREDIV2_DIV6) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV7) || ((__DIV__) == RCC_HSE_PREDIV2_DIV8) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV9) || ((__DIV__) == RCC_HSE_PREDIV2_DIV10) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV11) || ((__DIV__) == RCC_HSE_PREDIV2_DIV12) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV13) || ((__DIV__) == RCC_HSE_PREDIV2_DIV14) || \ + ((__DIV__) == RCC_HSE_PREDIV2_DIV15) || ((__DIV__) == RCC_HSE_PREDIV2_DIV16)) + +#define IS_RCC_PLL2(__PLL__) (((__PLL__) == RCC_PLL2_NONE) || ((__PLL__) == RCC_PLL2_OFF) || \ + ((__PLL__) == RCC_PLL2_ON)) + +#define IS_RCC_PLL2_MUL(__MUL__) (((__MUL__) == RCC_PLL2_MUL8) || ((__MUL__) == RCC_PLL2_MUL9) || \ + ((__MUL__) == RCC_PLL2_MUL10) || ((__MUL__) == RCC_PLL2_MUL11) || \ + ((__MUL__) == RCC_PLL2_MUL12) || ((__MUL__) == RCC_PLL2_MUL13) || \ + ((__MUL__) == RCC_PLL2_MUL14) || ((__MUL__) == RCC_PLL2_MUL16) || \ + ((__MUL__) == RCC_PLL2_MUL20)) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + +#elif defined(STM32F103xE) || defined(STM32F103xG) + +#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) + +#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + + +#elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + +#else + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC)) + +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + +#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV1_5)) + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** + * @brief RCC PLL2 configuration structure definition + */ +typedef struct +{ + uint32_t PLL2State; /*!< The new state of the PLL2. + This parameter can be a value of @ref RCCEx_PLL2_Config */ + + uint32_t PLL2MUL; /*!< PLL2MUL: Multiplication factor for PLL2 VCO input clock + This parameter must be a value of @ref RCCEx_PLL2_Multiplication_Factor*/ + +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value. + This parameter can be a value of @ref RCCEx_Prediv2_Factor */ + +#endif /* STM32F105xC || STM32F107xC */ +} RCC_PLL2InitTypeDef; + +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t Prediv1Source; /*!< The Prediv1 source value. + This parameter can be a value of @ref RCCEx_Prediv1_Source */ +#endif /* STM32F105xC || STM32F107xC */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t HSEPredivValue; /*!< The Prediv1 factor value (named PREDIV1 or PLLXTPRE in RM) + This parameter can be a value of @ref RCCEx_Prediv1_Factor */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + + RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + RCC_PLL2InitTypeDef PLL2; /*!< PLL2 structure parameters */ +#endif /* STM32F105xC || STM32F107xC */ +} RCC_OscInitTypeDef; + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** + * @brief RCC PLLI2S configuration structure definition + */ +typedef struct +{ + uint32_t PLLI2SMUL; /*!< PLLI2SMUL: Multiplication factor for PLLI2S VCO input clock + This parameter must be a value of @ref RCCEx_PLLI2S_Multiplication_Factor*/ + +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value. + This parameter can be a value of @ref RCCEx_Prediv2_Factor */ + +#endif /* STM32F105xC || STM32F107xC */ +} RCC_PLLI2SInitTypeDef; +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< specifies the RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t AdcClockSelection; /*!< ADC clock source + This parameter can be a value of @ref RCCEx_ADC_Prescaler */ + +#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) + uint32_t I2s2ClockSelection; /*!< I2S2 clock source + This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */ + + uint32_t I2s3ClockSelection; /*!< I2S3 clock source + This parameter can be a value of @ref RCCEx_I2S3_Clock_Source */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters + This parameter will be used only when PLLI2S is selected as Clock Source I2S2 or I2S3 */ + +#endif /* STM32F105xC || STM32F107xC */ +#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Prescaler */ + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +} RCC_PeriphCLKInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_RTC 0x00000001U +#define RCC_PERIPHCLK_ADC 0x00000002U +#if defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_PERIPHCLK_I2S2 0x00000004U +#define RCC_PERIPHCLK_I2S3 0x00000008U +#endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_PERIPHCLK_USB 0x00000010U +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup RCCEx_ADC_Prescaler ADC Prescaler + * @{ + */ +#define RCC_ADCPCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2 +#define RCC_ADCPCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4 +#define RCC_ADCPCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6 +#define RCC_ADCPCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8 + +/** + * @} + */ + +#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +/** @defgroup RCCEx_I2S2_Clock_Source I2S2 Clock Source + * @{ + */ +#define RCC_I2S2CLKSOURCE_SYSCLK 0x00000000U +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_I2S2CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S2SRC +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup RCCEx_I2S3_Clock_Source I2S3 Clock Source + * @{ + */ +#define RCC_I2S3CLKSOURCE_SYSCLK 0x00000000U +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_I2S3CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S3SRC +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + +/** @defgroup RCCEx_USB_Prescaler USB Prescaler + * @{ + */ +#define RCC_USBCLKSOURCE_PLL RCC_CFGR_USBPRE +#define RCC_USBCLKSOURCE_PLL_DIV1_5 0x00000000U + +/** + * @} + */ + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_USB_Prescaler USB Prescaler + * @{ + */ +#define RCC_USBCLKSOURCE_PLL_DIV2 RCC_CFGR_OTGFSPRE +#define RCC_USBCLKSOURCE_PLL_DIV3 0x00000000U + +/** + * @} + */ + +/** @defgroup RCCEx_PLLI2S_Multiplication_Factor PLLI2S Multiplication Factor + * @{ + */ + +#define RCC_PLLI2S_MUL8 RCC_CFGR2_PLL3MUL8 /*!< PLLI2S input clock * 8 */ +#define RCC_PLLI2S_MUL9 RCC_CFGR2_PLL3MUL9 /*!< PLLI2S input clock * 9 */ +#define RCC_PLLI2S_MUL10 RCC_CFGR2_PLL3MUL10 /*!< PLLI2S input clock * 10 */ +#define RCC_PLLI2S_MUL11 RCC_CFGR2_PLL3MUL11 /*!< PLLI2S input clock * 11 */ +#define RCC_PLLI2S_MUL12 RCC_CFGR2_PLL3MUL12 /*!< PLLI2S input clock * 12 */ +#define RCC_PLLI2S_MUL13 RCC_CFGR2_PLL3MUL13 /*!< PLLI2S input clock * 13 */ +#define RCC_PLLI2S_MUL14 RCC_CFGR2_PLL3MUL14 /*!< PLLI2S input clock * 14 */ +#define RCC_PLLI2S_MUL16 RCC_CFGR2_PLL3MUL16 /*!< PLLI2S input clock * 16 */ +#define RCC_PLLI2S_MUL20 RCC_CFGR2_PLL3MUL20 /*!< PLLI2S input clock * 20 */ + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Prediv1_Source Prediv1 Source + * @{ + */ + +#define RCC_PREDIV1_SOURCE_HSE RCC_CFGR2_PREDIV1SRC_HSE +#define RCC_PREDIV1_SOURCE_PLL2 RCC_CFGR2_PREDIV1SRC_PLL2 + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_Prediv1_Factor HSE Prediv1 Factor + * @{ + */ + +#define RCC_HSE_PREDIV_DIV1 0x00000000U + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV1_DIV2 +#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV1_DIV3 +#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV1_DIV4 +#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV1_DIV5 +#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV1_DIV6 +#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV1_DIV7 +#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV1_DIV8 +#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV1_DIV9 +#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV1_DIV10 +#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV1_DIV11 +#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV1_DIV12 +#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV1_DIV13 +#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV1_DIV14 +#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV1_DIV15 +#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV1_DIV16 +#else +#define RCC_HSE_PREDIV_DIV2 RCC_CFGR_PLLXTPRE +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Prediv2_Factor HSE Prediv2 Factor + * @{ + */ + +#define RCC_HSE_PREDIV2_DIV1 RCC_CFGR2_PREDIV2_DIV1 /*!< PREDIV2 input clock not divided */ +#define RCC_HSE_PREDIV2_DIV2 RCC_CFGR2_PREDIV2_DIV2 /*!< PREDIV2 input clock divided by 2 */ +#define RCC_HSE_PREDIV2_DIV3 RCC_CFGR2_PREDIV2_DIV3 /*!< PREDIV2 input clock divided by 3 */ +#define RCC_HSE_PREDIV2_DIV4 RCC_CFGR2_PREDIV2_DIV4 /*!< PREDIV2 input clock divided by 4 */ +#define RCC_HSE_PREDIV2_DIV5 RCC_CFGR2_PREDIV2_DIV5 /*!< PREDIV2 input clock divided by 5 */ +#define RCC_HSE_PREDIV2_DIV6 RCC_CFGR2_PREDIV2_DIV6 /*!< PREDIV2 input clock divided by 6 */ +#define RCC_HSE_PREDIV2_DIV7 RCC_CFGR2_PREDIV2_DIV7 /*!< PREDIV2 input clock divided by 7 */ +#define RCC_HSE_PREDIV2_DIV8 RCC_CFGR2_PREDIV2_DIV8 /*!< PREDIV2 input clock divided by 8 */ +#define RCC_HSE_PREDIV2_DIV9 RCC_CFGR2_PREDIV2_DIV9 /*!< PREDIV2 input clock divided by 9 */ +#define RCC_HSE_PREDIV2_DIV10 RCC_CFGR2_PREDIV2_DIV10 /*!< PREDIV2 input clock divided by 10 */ +#define RCC_HSE_PREDIV2_DIV11 RCC_CFGR2_PREDIV2_DIV11 /*!< PREDIV2 input clock divided by 11 */ +#define RCC_HSE_PREDIV2_DIV12 RCC_CFGR2_PREDIV2_DIV12 /*!< PREDIV2 input clock divided by 12 */ +#define RCC_HSE_PREDIV2_DIV13 RCC_CFGR2_PREDIV2_DIV13 /*!< PREDIV2 input clock divided by 13 */ +#define RCC_HSE_PREDIV2_DIV14 RCC_CFGR2_PREDIV2_DIV14 /*!< PREDIV2 input clock divided by 14 */ +#define RCC_HSE_PREDIV2_DIV15 RCC_CFGR2_PREDIV2_DIV15 /*!< PREDIV2 input clock divided by 15 */ +#define RCC_HSE_PREDIV2_DIV16 RCC_CFGR2_PREDIV2_DIV16 /*!< PREDIV2 input clock divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCCEx_PLL2_Config PLL Config + * @{ + */ +#define RCC_PLL2_NONE 0x00000000U +#define RCC_PLL2_OFF 0x00000001U +#define RCC_PLL2_ON 0x00000002U + +/** + * @} + */ + +/** @defgroup RCCEx_PLL2_Multiplication_Factor PLL2 Multiplication Factor + * @{ + */ + +#define RCC_PLL2_MUL8 RCC_CFGR2_PLL2MUL8 /*!< PLL2 input clock * 8 */ +#define RCC_PLL2_MUL9 RCC_CFGR2_PLL2MUL9 /*!< PLL2 input clock * 9 */ +#define RCC_PLL2_MUL10 RCC_CFGR2_PLL2MUL10 /*!< PLL2 input clock * 10 */ +#define RCC_PLL2_MUL11 RCC_CFGR2_PLL2MUL11 /*!< PLL2 input clock * 11 */ +#define RCC_PLL2_MUL12 RCC_CFGR2_PLL2MUL12 /*!< PLL2 input clock * 12 */ +#define RCC_PLL2_MUL13 RCC_CFGR2_PLL2MUL13 /*!< PLL2 input clock * 13 */ +#define RCC_PLL2_MUL14 RCC_CFGR2_PLL2MUL14 /*!< PLL2 input clock * 14 */ +#define RCC_PLL2_MUL16 RCC_CFGR2_PLL2MUL16 /*!< PLL2 input clock * 16 */ +#define RCC_PLL2_MUL20 RCC_CFGR2_PLL2MUL20 /*!< PLL2 input clock * 20 */ + +/** + * @} + */ + +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_PLL_Multiplication_Factor PLL Multiplication Factor + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#else +#define RCC_PLL_MUL2 RCC_CFGR_PLLMULL2 +#define RCC_PLL_MUL3 RCC_CFGR_PLLMULL3 +#endif /* STM32F105xC || STM32F107xC */ +#define RCC_PLL_MUL4 RCC_CFGR_PLLMULL4 +#define RCC_PLL_MUL5 RCC_CFGR_PLLMULL5 +#define RCC_PLL_MUL6 RCC_CFGR_PLLMULL6 +#define RCC_PLL_MUL7 RCC_CFGR_PLLMULL7 +#define RCC_PLL_MUL8 RCC_CFGR_PLLMULL8 +#define RCC_PLL_MUL9 RCC_CFGR_PLLMULL9 +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_PLL_MUL6_5 RCC_CFGR_PLLMULL6_5 +#else +#define RCC_PLL_MUL10 RCC_CFGR_PLLMULL10 +#define RCC_PLL_MUL11 RCC_CFGR_PLLMULL11 +#define RCC_PLL_MUL12 RCC_CFGR_PLLMULL12 +#define RCC_PLL_MUL13 RCC_CFGR_PLLMULL13 +#define RCC_PLL_MUL14 RCC_CFGR_PLLMULL14 +#define RCC_PLL_MUL15 RCC_CFGR_PLLMULL15 +#define RCC_PLL_MUL16 RCC_CFGR_PLLMULL16 +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** @defgroup RCCEx_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK ((uint32_t)RCC_CFGR_MCO_NOCLOCK) +#define RCC_MCO1SOURCE_SYSCLK ((uint32_t)RCC_CFGR_MCO_SYSCLK) +#define RCC_MCO1SOURCE_HSI ((uint32_t)RCC_CFGR_MCO_HSI) +#define RCC_MCO1SOURCE_HSE ((uint32_t)RCC_CFGR_MCO_HSE) +#define RCC_MCO1SOURCE_PLLCLK ((uint32_t)RCC_CFGR_MCO_PLLCLK_DIV2) +#if defined(STM32F105xC) || defined(STM32F107xC) +#define RCC_MCO1SOURCE_PLL2CLK ((uint32_t)RCC_CFGR_MCO_PLL2CLK) +#define RCC_MCO1SOURCE_PLL3CLK_DIV2 ((uint32_t)RCC_CFGR_MCO_PLL3CLK_DIV2) +#define RCC_MCO1SOURCE_EXT_HSE ((uint32_t)RCC_CFGR_MCO_EXT_HSE) +#define RCC_MCO1SOURCE_PLL3CLK ((uint32_t)RCC_CFGR_MCO_PLL3CLK) +#endif /* STM32F105xC || STM32F107xC*/ +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Interrupt RCCEx Interrupt + * @{ + */ +#define RCC_IT_PLL2RDY ((uint8_t)RCC_CIR_PLL2RDYF) +#define RCC_IT_PLLI2SRDY ((uint8_t)RCC_CIR_PLL3RDYF) +/** + * @} + */ + +/** @defgroup RCCEx_Flag RCCEx Flag + * Elements values convention: 0XXYYYYYb + * - YYYYY : Flag position in the register + * - XX : Register index + * - 01: CR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_PLL2RDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLL2RDY_Pos)) +#define RCC_FLAG_PLLI2SRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLL3RDY_Pos)) +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC*/ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\ + || defined (STM32F100xE) +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined (STM32F100xE) +#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */ + +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SDIOEN)) +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_OTGFSEN)) +#endif /* STM32F105xC || STM32F107xC*/ + +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACEN)) +#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACTXEN)) +#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACRXEN)) + +/** + * @brief Enable ETHERNET clock. + */ +#define __HAL_RCC_ETH_CLK_ENABLE() do { \ + __HAL_RCC_ETHMAC_CLK_ENABLE(); \ + __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ + __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ + } while(0U) +/** + * @brief Disable ETHERNET clock. + */ +#define __HAL_RCC_ETH_CLK_DISABLE() do { \ + __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ + __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ + __HAL_RCC_ETHMAC_CLK_DISABLE(); \ + } while(0U) + +#endif /* STM32F107xC*/ + +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\ + || defined (STM32F100xE) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */ +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined (STM32F100xE) +#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) != RESET) +#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */ +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) != RESET) +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) == RESET) +#endif /* STM32F103xE || STM32F103xG */ +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) == RESET) +#endif /* STM32F105xC || STM32F107xC*/ +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) != RESET) +#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) == RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) != RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) == RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) != RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) == RESET) +#endif /* STM32F107xC*/ + +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) +#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ + || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) +#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN)) +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined (STM32F100xE) +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) +#endif /* STM32F100xB || STM32F100xE */ + +#ifdef STM32F100xE +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#endif /* STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#endif /* STM32F101xG || STM32F103xG*/ + +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) +#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ + || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) +#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET) +#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET) +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ +#if defined(STM32F100xB) || defined (STM32F100xE) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) +#endif /* STM32F100xB || STM32F100xE */ +#ifdef STM32F100xE +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) +#endif /* STM32F100xE */ +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#endif /* STM32F105xC || STM32F107xC */ +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#endif /* STM32F101xG || STM32F103xG*/ + +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ + || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ + || defined(STM32F103xG) +#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) +#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xB) || defined(STM32F100xE) +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN)) +#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN)) +#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN)) +#endif /* STM32F100xB || STM32F100xE */ + +#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ + || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ + || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPEEN)) +#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ + +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) +#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xE) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN)) +#endif /* STM32F100xE */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) +#endif /* STM32F101xG || STM32F103xG */ + +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ + || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ + || defined(STM32F103xG) +#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) +#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) +#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ +#if defined(STM32F100xB) || defined(STM32F100xE) +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET) +#endif /* STM32F100xB || STM32F100xE */ +#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ + || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ + || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) == RESET) +#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) +#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) +#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) +#endif /* STM32F103xE || STM32F103xG */ +#if defined(STM32F100xE) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET) +#endif /* STM32F100xE */ +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) +#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) +#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) +#endif /* STM32F101xG || STM32F103xG */ + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Peripheral_Clock_Force_Release Peripheral Clock Force Release + * @brief Force or release AHB peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_OTGFSRST)) +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ETHMACRST)) +#endif /* STM32F107xC */ + +#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_OTGFSRST)) +#if defined(STM32F107xC) +#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ETHMACRST)) +#endif /* STM32F107xC */ + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ + || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) + +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) +#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ + || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) + +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) +#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST)) +#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST)) +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) + +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F100xB) || defined (STM32F100xE) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) + +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) +#endif /* STM32F100xB || STM32F100xE */ + +#if defined (STM32F100xE) +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) + +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#endif /* STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) + +#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) + +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#endif /* STM32F101xG || STM32F103xG */ + +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ + +#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ + || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ + || defined(STM32F103xG) +#define __HAL_RCC_ADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC2RST)) + +#define __HAL_RCC_ADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC2RST)) +#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xB) || defined(STM32F100xE) +#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST)) +#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST)) + +#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST)) +#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST)) +#endif /* STM32F100xB || STM32F100xE */ + +#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ + || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ + || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ + || defined(STM32F107xC) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPERST)) + +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPERST)) +#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ + +#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ + || defined(STM32F103xG) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST)) + +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST)) +#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ + +#if defined(STM32F103xE) || defined(STM32F103xG) +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC3RST)) + +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC3RST)) +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F100xE) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST)) + +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST)) +#endif /* STM32F100xE */ + +#if defined(STM32F101xG) || defined(STM32F103xG) +#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) + +#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) +#endif /* STM32F101xG || STM32F103xG*/ + +/** + * @} + */ + +/** @defgroup RCCEx_HSE_Configuration HSE Configuration + * @{ + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +/** + * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. + * @note Predivision factor can not be changed if PLL is used as system clock + * In this case, you have to select another source of the system clock, disable the PLL and + * then change the HSE predivision factor. + * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. + * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16. + */ +#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1, (uint32_t)(__HSE_PREDIV_VALUE__)) +#else +/** + * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. + * @note Predivision factor can not be changed if PLL is used as system clock + * In this case, you have to select another source of the system clock, disable the PLL and + * then change the HSE predivision factor. + * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. + * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV2. + */ +#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \ + MODIFY_REG(RCC->CFGR,RCC_CFGR_PLLXTPRE, (uint32_t)(__HSE_PREDIV_VALUE__)) + +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) +/** + * @brief Macro to get prediv1 factor for PLL. + */ +#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1) + +#else +/** + * @brief Macro to get prediv1 factor for PLL. + */ +#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE) + +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_PLLI2S_Configuration PLLI2S Configuration + * @{ + */ + +/** @brief Macros to enable the main PLLI2S. + * @note After enabling the main PLLI2S, the application software should wait on + * PLLI2SRDY flag to be set indicating that PLLI2S clock is stable and can + * be used as system clock source. + * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) + +/** @brief Macros to disable the main PLLI2S. + * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) + +/** @brief macros to configure the main PLLI2S multiplication factor. + * @note This function must be used only when the main PLLI2S is disabled. + * + * @param __PLLI2SMUL__ specifies the multiplication factor for PLLI2S VCO output clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLLI2S_MUL8 PLLI2SVCO = PLLI2S clock entry x 8 + * @arg @ref RCC_PLLI2S_MUL9 PLLI2SVCO = PLLI2S clock entry x 9 + * @arg @ref RCC_PLLI2S_MUL10 PLLI2SVCO = PLLI2S clock entry x 10 + * @arg @ref RCC_PLLI2S_MUL11 PLLI2SVCO = PLLI2S clock entry x 11 + * @arg @ref RCC_PLLI2S_MUL12 PLLI2SVCO = PLLI2S clock entry x 12 + * @arg @ref RCC_PLLI2S_MUL13 PLLI2SVCO = PLLI2S clock entry x 13 + * @arg @ref RCC_PLLI2S_MUL14 PLLI2SVCO = PLLI2S clock entry x 14 + * @arg @ref RCC_PLLI2S_MUL16 PLLI2SVCO = PLLI2S clock entry x 16 + * @arg @ref RCC_PLLI2S_MUL20 PLLI2SVCO = PLLI2S clock entry x 20 + * + */ +#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SMUL__)\ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL3MUL,(__PLLI2SMUL__)) + +/** + * @} + */ + +#endif /* STM32F105xC || STM32F107xC */ + +/** @defgroup RCCEx_Peripheral_Configuration Peripheral Configuration + * @brief Macros to configure clock source of different peripherals. + * @{ + */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) +/** @brief Macro to configure the USB clock. + * @param __USBCLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock + */ +#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSOURCE__)) + +/** @brief Macro to get the USB clock (USBCLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE))) + +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + +/** @brief Macro to configure the USB OTSclock. + * @param __USBCLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock + */ +#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_OTGFSPRE, (uint32_t)(__USBCLKSOURCE__)) + +/** @brief Macro to get the USB clock (USBCLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock + * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_OTGFSPRE))) + +#endif /* STM32F105xC || STM32F107xC */ + +/** @brief Macro to configure the ADCx clock (x=1 to 3 depending on devices). + * @param __ADCCLKSOURCE__ specifies the ADC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock + */ +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADCCLKSOURCE__)) + +/** @brief Macro to get the ADC clock (ADCxCLK, x=1 to 3 depending on devices). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock + * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE))) + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + +/** @addtogroup RCCEx_HSE_Configuration + * @{ + */ + +/** + * @brief Macro to configure the PLL2 & PLLI2S Predivision factor. + * @note Predivision factor can not be changed if PLL2 is used indirectly as system clock + * In this case, you have to select another source of the system clock, disable the PLL2 and PLLI2S and + * then change the PREDIV2 factor. + * @param __HSE_PREDIV2_VALUE__ specifies the PREDIV2 value applied to PLL2 & PLLI2S. + * This parameter must be a number between RCC_HSE_PREDIV2_DIV1 and RCC_HSE_PREDIV2_DIV16. + */ +#define __HAL_RCC_HSE_PREDIV2_CONFIG(__HSE_PREDIV2_VALUE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV2, (uint32_t)(__HSE_PREDIV2_VALUE__)) + +/** + * @brief Macro to get prediv2 factor for PLL2 & PLL3. + */ +#define __HAL_RCC_HSE_GET_PREDIV2() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV2) + +/** + * @} + */ + +/** @addtogroup RCCEx_PLLI2S_Configuration + * @{ + */ + +/** @brief Macros to enable the main PLL2. + * @note After enabling the main PLL2, the application software should wait on + * PLL2RDY flag to be set indicating that PLL2 clock is stable and can + * be used as system clock source. + * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL2_ENABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = ENABLE) + +/** @brief Macros to disable the main PLL2. + * @note The main PLL2 can not be disabled if it is used indirectly as system clock source + * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL2_DISABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = DISABLE) + +/** @brief macros to configure the main PLL2 multiplication factor. + * @note This function must be used only when the main PLL2 is disabled. + * + * @param __PLL2MUL__ specifies the multiplication factor for PLL2 VCO output clock + * This parameter can be one of the following values: + * @arg @ref RCC_PLL2_MUL8 PLL2VCO = PLL2 clock entry x 8 + * @arg @ref RCC_PLL2_MUL9 PLL2VCO = PLL2 clock entry x 9 + * @arg @ref RCC_PLL2_MUL10 PLL2VCO = PLL2 clock entry x 10 + * @arg @ref RCC_PLL2_MUL11 PLL2VCO = PLL2 clock entry x 11 + * @arg @ref RCC_PLL2_MUL12 PLL2VCO = PLL2 clock entry x 12 + * @arg @ref RCC_PLL2_MUL13 PLL2VCO = PLL2 clock entry x 13 + * @arg @ref RCC_PLL2_MUL14 PLL2VCO = PLL2 clock entry x 14 + * @arg @ref RCC_PLL2_MUL16 PLL2VCO = PLL2 clock entry x 16 + * @arg @ref RCC_PLL2_MUL20 PLL2VCO = PLL2 clock entry x 20 + * + */ +#define __HAL_RCC_PLL2_CONFIG(__PLL2MUL__)\ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL2MUL,(__PLL2MUL__)) + +/** + * @} + */ + +/** @defgroup RCCEx_I2S_Configuration I2S Configuration + * @brief Macros to configure clock source of I2S peripherals. + * @{ + */ + +/** @brief Macro to configure the I2S2 clock. + * @param __I2S2CLKSOURCE__ specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_I2S2_CONFIG(__I2S2CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S2SRC, (uint32_t)(__I2S2CLKSOURCE__)) + +/** @brief Macro to get the I2S2 clock (I2S2CLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S2SRC))) + +/** @brief Macro to configure the I2S3 clock. + * @param __I2S2CLKSOURCE__ specifies the I2S3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_I2S3_CONFIG(__I2S2CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S3SRC, (uint32_t)(__I2S2CLKSOURCE__)) + +/** @brief Macro to get the I2S3 clock (I2S3CLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry + * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry + */ +#define __HAL_RCC_GET_I2S3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S3SRC))) + +/** + * @} + */ + +#endif /* STM32F105xC || STM32F107xC */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init); +HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void); + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_RCC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h new file mode 100644 index 0000000..f06ca5c --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h @@ -0,0 +1,2123 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_TIM_H +#define STM32F1xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode + This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode + This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + uint32_t LockLevel; /*!< TIM Lock level + This parameter can be a value of @ref TIM_Lock_level */ + uint32_t DeadTime; /*!< TIM dead Time + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint32_t BreakState; /*!< TIM Break State + This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + uint32_t BreakPolarity; /*!< TIM Break input polarity + This parameter can be a value of @ref TIM_Break_Polarity */ + uint32_t BreakFilter; /*!< Specifies the break input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event + (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder +mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__HANDLE__)->Instance->CCR4)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + (__HANDLE__)->ChannelState[3]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32f1xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F1xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h new file mode 100644 index 0000000..6f1b5e5 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h @@ -0,0 +1,262 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_HAL_TIM_EX_H +#define STM32F1xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F1xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h new file mode 100644 index 0000000..31e6d95 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h @@ -0,0 +1,662 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F1xx_LL_USB_H +#define STM32F1xx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +#if defined (USB) || defined (USB_OTG_FS) +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief USB Mode definition + */ +#if defined (USB_OTG_FS) + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1, + USB_DRD_MODE = 2 +} USB_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_OTG_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR +} USB_OTG_HCStateTypeDef; + +/** + * @brief USB Instance Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref USB_Core_Speed */ + + uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref USB_Core_PHY */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ + + uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ + + uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ + +} USB_OTG_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type_ */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t even_odd_frame; /*!< IFrame parity + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ +} USB_OTG_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t speed; /*!< USB Host speed. + This parameter can be any value of @ref USB_Core_Speed_ */ + + uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ + + uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_EP_Type_ */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ + + uint32_t ErrCnt; /*!< Host channel error count. */ + + USB_OTG_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ + + USB_OTG_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ +} USB_OTG_HCTypeDef; +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) + +typedef enum +{ + USB_DEVICE_MODE = 0 +} USB_ModeTypeDef; + +/** + * @brief USB Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref USB_Core_Speed */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref USB_Core_PHY */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ + + uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ +} USB_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral + This parameter is added to ensure compatibility across USB peripherals */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + + uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ + + uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ + +} USB_EPTypeDef; +#endif /* defined (USB) */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +#if defined (USB_OTG_FS) +/** @defgroup USB_OTG_CORE VERSION ID + * @{ + */ +#define USB_OTG_CORE_ID_300A 0x4F54300AU +#define USB_OTG_CORE_ID_310A 0x4F54310AU +/** + * @} + */ + +/** @defgroup USB_Core_Mode_ USB Core Mode + * @{ + */ +#define USB_OTG_MODE_DEVICE 0U +#define USB_OTG_MODE_HOST 1U +#define USB_OTG_MODE_DRD 2U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_FS_SPEED 2U +#define USBH_FSLS_SPEED 1U +/** + * @} + */ + +/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed + * @{ + */ +#define USB_OTG_SPEED_FULL 3U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY + * @{ + */ +#define USB_OTG_ULPI_PHY 1U +#define USB_OTG_EMBEDDED_PHY 2U +/** + * @} + */ + +/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value + * @{ + */ +#ifndef USBD_FS_TRDT_VALUE +#define USBD_FS_TRDT_VALUE 5U +#define USBD_DEFAULT_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +/** + * @} + */ + +/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS + * @{ + */ +#define USB_OTG_FS_MAX_PACKET_SIZE 64U +#define USB_OTG_MAX_EP0_SIZE 64U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency + * @{ + */ +#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) +#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) +#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) +/** + * @} + */ + +/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval + * @{ + */ +#define DCFG_FRAME_INTERVAL_80 0U +#define DCFG_FRAME_INTERVAL_85 1U +#define DCFG_FRAME_INTERVAL_90 2U +#define DCFG_FRAME_INTERVAL_95 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed + * @{ + */ +#define EP_SPEED_LOW 0U +#define EP_SPEED_FULL 1U +#define EP_SPEED_HIGH 2U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines + * @{ + */ +#define STS_GOUT_NAK 1U +#define STS_DATA_UPDT 2U +#define STS_XFER_COMP 3U +#define STS_SETUP_COMP 4U +#define STS_SETUP_UPDT 6U +/** + * @} + */ + +/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines + * @{ + */ +#define HCFG_30_60_MHZ 0U +#define HCFG_48_MHZ 1U +#define HCFG_6_MHZ 2U +/** + * @} + */ + +/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines + * @{ + */ +#define HPRT0_PRTSPD_HIGH_SPEED 0U +#define HPRT0_PRTSPD_FULL_SPEED 1U +#define HPRT0_PRTSPD_LOW_SPEED 2U +/** + * @} + */ + +#define HCCHAR_CTRL 0U +#define HCCHAR_ISOC 1U +#define HCCHAR_BULK 2U +#define HCCHAR_INTR 3U + +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U + +#define GRXSTS_PKTSTS_IN 2U +#define GRXSTS_PKTSTS_IN_XFER_COMP 3U +#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U +#define GRXSTS_PKTSTS_CH_HALTED 7U + +#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) +#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) + +#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) +#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) +#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) +#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) + +#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) +#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE + USB_OTG_HOST_CHANNEL_BASE + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_FS_SPEED 2U +/** + * @} + */ + +#define BTABLE_ADDRESS 0x000U +#define PMA_ACCESS 2U +#endif /* defined (USB) */ +#if defined (USB_OTG_FS) +#define EP_ADDR_MSK 0xFU +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +#define EP_ADDR_MSK 0x7U +#endif /* defined (USB) */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros + * @{ + */ +#if defined (USB_OTG_FS) +#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) +#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) + +#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) +#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) +#endif /* defined (USB_OTG_FS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ +#if defined (USB_OTG_FS) +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len); + +void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); + +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps); +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, + USB_OTG_HCTypeDef *hc); + +uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num); +HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); +HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len); + +void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); + +uint32_t USB_ReadInterrupts(USB_TypeDef *USBx); +uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); +void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); + +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); +#endif /* defined (USB) */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F1xx_LL_USB_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c new file mode 100644 index 0000000..616c155 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c @@ -0,0 +1,606 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief STM32F1xx HAL Driver version number V1.1.7 + */ +#define __STM32F1xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32F1xx_HAL_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */ +#define __STM32F1xx_HAL_VERSION_SUB2 (0x07U) /*!< [15:8] sub2 version */ +#define __STM32F1xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32F1xx_HAL_VERSION ((__STM32F1xx_HAL_VERSION_MAIN << 24)\ + |(__STM32F1xx_HAL_VERSION_SUB1 << 16)\ + |(__STM32F1xx_HAL_VERSION_SUB2 << 8 )\ + |(__STM32F1xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK 0x00000FFFU + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/** @defgroup HAL_Private_Variables HAL Private Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface, the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed + and the backup domain when enabled. + (+) de-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief This function is used to initialize the HAL Library; it must be the first + * instruction to be executed in the main program (before to call any other + * HAL function), it performs the following: + * Configure the Flash prefetch. + * Configures the SysTick to generate an interrupt each 1 millisecond, + * which is clocked by the HSI (at this stage, the clock is not yet + * configured and thus the system is running from the internal HSI at 16 MHz). + * Set NVIC Group Priority to 4. + * Calls the HAL_MspInit() callback function defined in user file + * "stm32f1xx_hal_msp.c" to do the global low level hardware initialization + * + * @note SysTick is used as time base for the HAL_Delay() function, the application + * need to ensure that the SysTick time base is always set to 1 millisecond + * to have correct HAL operation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) +#if defined(STM32F101x6) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \ + defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + + /* Prefetch buffer is not available on value line devices */ + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + HAL_InitTick(TICK_INT_PRIORITY); + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the systick. + * of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + +#if defined(STM32F105xC) || defined(STM32F107xC) + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); +#endif + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /* Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) + { + return HAL_ERROR; + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Returns the HAL revision + * @retval version 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32F1xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return ((DBGMCU->IDCODE) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Returns the device identifier. + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return ((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * Note: On all STM32F1 devices: + * If the system tick timer interrupt is enabled during the Stop mode + * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup + * the system from Stop mode. + * Workaround: To debug the Stop mode, disable the system tick timer + * interrupt. + * Refer to errata sheet of these devices for more details. + * Note: On all STM32F1 devices: + * If the system tick timer interrupt is enabled during the Stop mode + * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup + * the system from Stop mode. + * Workaround: To debug the Stop mode, disable the system tick timer + * interrupt. + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c new file mode 100644 index 0000000..a89150a --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c @@ -0,0 +1,505 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M3 exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() + function according to the following table. + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). + (#) please refer to programming manual for details in how to configure priority. + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest preemption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value 0x0F. + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32f1xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Sets the priority grouping field (preemption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup: The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn: External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xx.h)) + * @param PreemptPriority: The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority: the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup = 0x00U; + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enables a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disables a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiates a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +#if (__MPU_PRESENT == 1U) +/** + * @brief Disables the MPU + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable fault exceptions */ + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0U; +} + +/** + * @brief Enable the MPU. + * @param MPU_Control: Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; + + /* Enable fault exceptions */ + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + +/** + * @brief Initializes and configures the Region and the memory to be protected. + * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != RESET) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00U; + MPU->RASR = 0x00U; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @brief Gets the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Gets the priority of an interrupt. + * @param IRQn: External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @param PriorityGroup: the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority: Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Sets Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Gets Pending Interrupt (reads the pending register in the NVIC + * and returns the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clears the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configures the SysTick clock source. + * @param CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief This function handles SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c new file mode 100644 index 0000000..c9bc061 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c @@ -0,0 +1,899 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e. a member of DMA handle structure). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp = 0U; + + /* Check the DMA handle allocation */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->DmaBaseAddress = DMA2; + } +#else + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; +#endif /* DMA2 */ + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Reset DMA Channel Number of Data to Transfer register */ + hdma->Instance->CNDTR = 0U; + + /* Reset DMA Channel peripheral address register */ + hdma->Instance->CPAR = 0U; + + /* Reset DMA Channel memory address register */ + hdma->Instance->CMAR = 0U; + +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->DmaBaseAddress = DMA2; + } +#else + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; +#endif /* DMA2 */ + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex)); + + /* Clean all callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Reset the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Reset the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if(NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + } + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_GI_FLAG_INDEX(hdma)); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel: Specifies the DMA level complete. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart = 0U; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC)) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Transfer Complete flag */ + temp = __HAL_DMA_GET_TC_FLAG_INDEX(hdma); + } + else + { + /* Half Transfer Complete flag */ + temp = __HAL_DMA_GET_HT_FLAG_INDEX(hdma); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(__HAL_DMA_GET_FLAG(hdma, temp) == RESET) + { + if((__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Update error code */ + SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE); + + /* Change the DMA state */ + hdma->State= HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + /* Update error code */ + SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Handles DMA interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex)) != RESET) && ((source_it & DMA_IT_HT) != RESET)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if (((flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex)) != RESET) && ((source_it & DMA_IT_TC) != RESET)) + { + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + return; +} + +/** + * @brief Register callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID: User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback: pointer to private callbacsk function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID: User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA hande state. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c new file mode 100644 index 0000000..44daaff --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c @@ -0,0 +1,559 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two different + interrupts pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + EXTI->RTSR |= maskline; + } + else + { + EXTI->RTSR &= ~maskline; + } + + /* Configure falling trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + EXTI->FTSR |= maskline; + } + else + { + EXTI->FTSR &= ~maskline; + } + + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = AFIO->EXTICR[linepos >> 2u]; + regval &= ~(AFIO_EXTICR1_EXTI0 << (AFIO_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (AFIO_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + AFIO->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + EXTI->IMR |= maskline; + } + else + { + EXTI->IMR &= ~maskline; + } + + /* Configure event mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + EXTI->EMR |= maskline; + } + else + { + EXTI->EMR &= ~maskline; + } + + return HAL_OK; +} + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + + /* Check if selected line is enable */ + if ((EXTI->IMR & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + /* Check if selected line is enable */ + if ((EXTI->EMR & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + /* Check if configuration of selected line is enable */ + if ((EXTI->RTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + } + + /* Get falling configuration */ + /* Check if configuration of selected line is enable */ + if ((EXTI->FTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = AFIO->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = ((regval << (AFIO_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); + } + else + { + pExtiConfig->GPIOSel = 0x00u; + } + } + else + { + /* No Trigger selected */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + } + + return HAL_OK; +} + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + EXTI->IMR = (EXTI->IMR & ~maskline); + + /* 2] Clear event mode */ + EXTI->EMR = (EXTI->EMR & ~maskline); + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + EXTI->RTSR = (EXTI->RTSR & ~maskline); + EXTI->FTSR = (EXTI->FTSR & ~maskline); + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = AFIO->EXTICR[linepos >> 2u]; + regval &= ~(AFIO_EXTICR1_EXTI0 << (AFIO_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + AFIO->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t maskline; + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending bit */ + regval = (EXTI->PR & maskline); + if (regval != 0x00u) + { + /* Clear pending bit */ + EXTI->PR = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t regval; + uint32_t maskline; + uint32_t linepos; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* return 1 if bit is set else 0 */ + regval = ((EXTI->PR & maskline) >> linepos); + return regval; +} + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Clear Pending bit */ + EXTI->PR = maskline; +} + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Generate Software interrupt */ + EXTI->SWIER = maskline; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c new file mode 100644 index 0000000..50abf92 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c @@ -0,0 +1,967 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Prefetch on I-Code + (+) Option Bytes programming + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32F1xx devices. + + (#) FLASH Memory I/O Programming functions: this group includes all needed + functions to erase and program the main memory: + (++) Lock and Unlock the FLASH interface + (++) Erase function: Erase page, erase all pages + (++) Program functions: half word, word and doubleword + (#) FLASH Option Bytes Programming functions: this group includes all needed + functions to manage the Option Bytes: + (++) Lock and Unlock the Option Bytes + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Launch the Option Bytes loader + (++) Erase Option Bytes + (++) Program the data Option Bytes + (++) Get the Write protection. + (++) Get the user option bytes. + + (#) Interrupts and flags management functions : this group + includes all needed functions to: + (++) Handle FLASH interrupts + (++) Wait for last FLASH operation according to its status + (++) Get error flag status + + [..] In addition to these function, this driver includes a set of macros allowing + to handle the following operations: + + (+) Set/Get the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the half cycle access + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro ---------------------------- ---------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); +static void FLASH_SetErrorCode(void); +extern void FLASH_PageErase(uint32_t PageAddress); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim +@endverbatim + * @{ + */ + +/** + * @brief Program halfword, word or double word at a specified address + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @note FLASH should be previously erased before new programmation (only exception to this + * is when 0x0000 is programmed) + * + * @param TypeProgram: Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address: Specifies the address to be programmed. + * @param Data: Specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint8_t index = 0; + uint8_t nbiterations = 0; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + +#if defined(FLASH_BANK2_END) + if(Address <= FLASH_BANK1_END) + { +#endif /* FLASH_BANK2_END */ + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); +#if defined(FLASH_BANK2_END) + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2(FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_BANK2_END */ + + if(status == HAL_OK) + { + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + /* Program halfword (16-bit) at a specified address. */ + nbiterations = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /* Program word (32-bit = 2*16-bit) at a specified address. */ + nbiterations = 2U; + } + else + { + /* Program double word (64-bit = 4*16-bit) at a specified address. */ + nbiterations = 4U; + } + + for (index = 0U; index < nbiterations; index++) + { + FLASH_Program_HalfWord((Address + (2U*index)), (uint16_t)(Data >> (16U*index))); + +#if defined(FLASH_BANK2_END) + if(Address <= FLASH_BANK1_END) + { +#endif /* FLASH_BANK2_END */ + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); +#if defined(FLASH_BANK2_END) + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG); + } +#endif /* FLASH_BANK2_END */ + /* In case of error, stop programation procedure */ + if (status != HAL_OK) + { + break; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program halfword, word or double word at a specified address with interrupt enabled. + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param TypeProgram: Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address: Specifies the address to be programmed. + * @param Data: Specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + +#if defined(FLASH_BANK2_END) + /* If procedure already ongoing, reject the next one */ + if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + return HAL_ERROR; + } + + if(Address <= FLASH_BANK1_END) + { + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1); + + }else + { + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); + } +#else + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); +#endif /* FLASH_BANK2_END */ + + pFlash.Address = Address; + pFlash.Data = Data; + + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD; + /* Program halfword (16-bit) at a specified address. */ + pFlash.DataRemaining = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD; + /* Program word (32-bit : 2*16-bit) at a specified address. */ + pFlash.DataRemaining = 2U; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD; + /* Program double word (64-bit : 4*16-bit) at a specified address. */ + pFlash.DataRemaining = 4U; + } + + /* Program halfword (16-bit) at a specified address. */ + FLASH_Program_HalfWord(Address, (uint16_t)Data); + + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t addresstmp = 0U; + + /* Check FLASH operation error flags */ +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK1) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK1) || \ + (__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2))) +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) +#endif /* FLASH_BANK2_END */ + { + /* Return the faulty address */ + addresstmp = pFlash.Address; + /* Reset address */ + pFlash.Address = 0xFFFFFFFFU; + + /* Save the Error code */ + FLASH_SetErrorCode(); + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(addresstmp); + + /* Stop the procedure ongoing */ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK1)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK1); +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); +#endif /* FLASH_BANK2_END */ + + /* Process can continue only if no error detected */ + if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still pages to erase */ + if(pFlash.DataRemaining != 0U) + { + addresstmp = pFlash.Address; + /*Indicate user which sector has been erased */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + + /*Increment sector number*/ + addresstmp = pFlash.Address + FLASH_PAGE_SIZE; + pFlash.Address = addresstmp; + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + FLASH_PageErase(addresstmp); + } + else + { + /* No more pages to Erase, user callback can be called. */ + /* Reset Sector and stop Erase pages procedure */ + pFlash.Address = addresstmp = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + } + } + else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /* Operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + +#if defined(FLASH_BANK2_END) + /* Stop Mass Erase procedure if no pending mass erase on other bank */ + if (HAL_IS_BIT_CLR(FLASH->CR2, FLASH_CR2_MER)) + { +#endif /* FLASH_BANK2_END */ + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(0U); + + /* Stop Mass Erase procedure*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } +#if defined(FLASH_BANK2_END) + } +#endif /* FLASH_BANK2_END */ + else + { + /* Nb of 16-bit data to program can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still 16-bit data to program */ + if(pFlash.DataRemaining != 0U) + { + /* Increment address to 16-bit */ + pFlash.Address += 2U; + addresstmp = pFlash.Address; + + /* Shift to have next 16-bit data */ + pFlash.Data = (pFlash.Data >> 16U); + + /* Operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); + + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); + } + else + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2U); + } + else + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6U); + } + + /* Reset Address and stop Program procedure */ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + } + } + +#if defined(FLASH_BANK2_END) + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG( FLASH_FLAG_EOP_BANK2)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2); + + /* Process can continue only if no error detected */ + if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still pages to erase*/ + if(pFlash.DataRemaining != 0U) + { + /* Indicate user which page address has been erased*/ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + + /* Increment page address to next page */ + pFlash.Address += FLASH_PAGE_SIZE; + addresstmp = pFlash.Address; + + /* Operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER); + + FLASH_PageErase(addresstmp); + } + else + { + /*No more pages to Erase*/ + + /*Reset Address and stop Erase pages procedure*/ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + } + else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /* Operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); + + if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_MER)) + { + /* MassErase ended. Return the selected bank*/ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(0U); + + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + else + { + /* Nb of 16-bit data to program can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still 16-bit data to program */ + if(pFlash.DataRemaining != 0U) + { + /* Increment address to 16-bit */ + pFlash.Address += 2U; + addresstmp = pFlash.Address; + + /* Shift to have next 16-bit data */ + pFlash.Data = (pFlash.Data >> 16U); + + /* Operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG); + + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); + } + else + { + /*Program ended. Return the selected address*/ + /* FLASH EOP interrupt user callback */ + if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address-2U); + } + else + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address-6U); + } + + /* Reset Address and stop Program procedure*/ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + } + } +#endif + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { +#if defined(FLASH_BANK2_END) + /* Operation is completed, disable the PG, PER and MER Bits for both bank */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); + CLEAR_BIT(FLASH->CR2, (FLASH_CR2_PG | FLASH_CR2_PER | FLASH_CR2_MER)); + + /* Disable End of FLASH Operation and Error source interrupts for both banks */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1 | FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); +#else + /* Operation is completed, disable the PG, PER and MER Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); + + /* Disable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); +#endif /* FLASH_BANK2_END */ + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which has been erased + * (if 0xFFFFFFFF, it means that all the selected pages have been erased) + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which returned an error + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* Verify Flash is unlocked */ + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + status = HAL_ERROR; + } + } +#if defined(FLASH_BANK2_END) + if(READ_BIT(FLASH->CR2, FLASH_CR2_LOCK) != RESET) + { + /* Authorize the FLASH BANK2 Registers access */ + WRITE_REG(FLASH->KEYR2, FLASH_KEY1); + WRITE_REG(FLASH->KEYR2, FLASH_KEY2); + + /* Verify Flash BANK2 is unlocked */ + if(READ_BIT(FLASH->CR2, FLASH_CR2_LOCK) != RESET) + { + status = HAL_ERROR; + } + } +#endif /* FLASH_BANK2_END */ + + return status; +} + +/** + * @brief Locks the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + +#if defined(FLASH_BANK2_END) + /* Set the LOCK Bit to lock the FLASH BANK2 Registers access */ + SET_BIT(FLASH->CR2, FLASH_CR2_LOCK); + +#endif /* FLASH_BANK2_END */ + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE)) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE); + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @note This function will reset automatically the MCU. + * @retval None + */ +void HAL_FLASH_OB_Launch(void) +{ + /* Initiates a system reset request to launch the option byte loading */ + HAL_NVIC_SystemReset(); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions + * @brief Peripheral errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be: + * @ref FLASH_Error_Codes + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Program a half-word (16-bit) at a specified address. + * @param Address specify the address to be programmed. + * @param Data specify the data to be programmed. + * @retval None + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined(FLASH_BANK2_END) + if(Address <= FLASH_BANK1_END) + { +#endif /* FLASH_BANK2_END */ + /* Proceed to program the new data */ + SET_BIT(FLASH->CR, FLASH_CR_PG); +#if defined(FLASH_BANK2_END) + } + else + { + /* Proceed to program the new data */ + SET_BIT(FLASH->CR2, FLASH_CR2_PG); + } +#endif /* FLASH_BANK2_END */ + + /* Write data in the address */ + *(__IO uint16_t*)Address = Data; +} + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) + { + if (Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* There is no error flag set */ + return HAL_OK; +} + +#if defined(FLASH_BANK2_END) +/** + * @brief Wait for a FLASH BANK2 operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout) +{ + /* Wait for the FLASH BANK2 operation to complete by polling on BUSY flag to be reset. + Even if the FLASH BANK2 operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY_BANK2)) + { + if (Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK2)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2)) + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* If there is an error flag set */ + return HAL_OK; + +} +#endif /* FLASH_BANK2_END */ + +/** + * @brief Set the specific FLASH error flag. + * @retval None + */ +static void FLASH_SetErrorCode(void) +{ + uint32_t flags = 0U; + +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2)) +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)) +#endif /* FLASH_BANK2_END */ + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; +#if defined(FLASH_BANK2_END) + flags |= FLASH_FLAG_WRPERR | FLASH_FLAG_WRPERR_BANK2; +#else + flags |= FLASH_FLAG_WRPERR; +#endif /* FLASH_BANK2_END */ + } +#if defined(FLASH_BANK2_END) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2)) +#else + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) +#endif /* FLASH_BANK2_END */ + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG; +#if defined(FLASH_BANK2_END) + flags |= FLASH_FLAG_PGERR | FLASH_FLAG_PGERR_BANK2; +#else + flags |= FLASH_FLAG_PGERR; +#endif /* FLASH_BANK2_END */ + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV; + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPTVERR); + } + + /* Clear FLASH error pending bits */ + __HAL_FLASH_CLEAR_FLAG(flags); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c new file mode 100644 index 0000000..ebd6f8b --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c @@ -0,0 +1,1127 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the FLASH peripheral: + * + Extended Initialization/de-initialization functions + * + Extended I/O operation functions + * + Extended Peripheral Control functions + * + @verbatim + ============================================================================== + ##### Flash peripheral extended features ##### + ============================================================================== + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32F1xxx devices. It includes + + (++) Set/Reset the write protection + (++) Program the user Option Bytes + (++) Get the Read protection Level + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @addtogroup FLASH + * @{ + */ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_POSITION_IWDGSW_BIT FLASH_OBR_IWDG_SW_Pos +#define FLASH_POSITION_OB_USERDATA0_BIT FLASH_OBR_DATA0_Pos +#define FLASH_POSITION_OB_USERDATA1_BIT FLASH_OBR_DATA1_Pos +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +/* Erase operations */ +static void FLASH_MassErase(uint32_t Banks); +void FLASH_PageErase(uint32_t PageAddress); + +/* Option bytes control */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig); +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data); +static uint32_t FLASH_OB_GetWRP(void); +static uint32_t FLASH_OB_GetRDP(void); +static uint8_t FLASH_OB_GetUser(void); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions + * @brief FLASH Memory Erasing functions + * +@verbatim + ============================================================================== + ##### FLASH Erasing Programming functions ##### + ============================================================================== + + [..] The FLASH Memory Erasing functions, includes the following functions: + (+) @ref HAL_FLASHEx_Erase: return only when erase has been done + (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback + is called with parameter 0xFFFFFFFF + + [..] Any operation of erase should follow these steps: + (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and + program memory access. + (#) Call the desired function to erase page. + (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access + (recommended to protect the FLASH memory against possible unwanted operation). + +@endverbatim + * @{ + */ + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] PageError pointer to variable that + * contains the configuration information on faulty page in case of error + * (0xFFFFFFFF means that all the pages have been correctly erased) + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t address = 0U; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { +#if defined(FLASH_BANK2_END) + if (pEraseInit->Banks == FLASH_BANK_BOTH) + { + /* Mass Erase requested for Bank1 and Bank2 */ + /* Wait for last operation to be completed */ + if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \ + (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)) + { + /*Mass erase to be done*/ + FLASH_MassErase(FLASH_BANK_BOTH); + + /* Wait for last operation to be completed */ + if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \ + (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)) + { + status = HAL_OK; + } + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); + } + } + else if (pEraseInit->Banks == FLASH_BANK_2) + { + /* Mass Erase requested for Bank2 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Mass erase to be done*/ + FLASH_MassErase(FLASH_BANK_2); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); + } + } + else +#endif /* FLASH_BANK2_END */ + { + /* Mass Erase requested for Bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Mass erase to be done*/ + FLASH_MassErase(FLASH_BANK_1); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + } + } + } + else + { + /* Page Erase is requested */ + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + +#if defined(FLASH_BANK2_END) + /* Page Erase requested on address located on bank2 */ + if(pEraseInit->PageAddress > FLASH_BANK1_END) + { + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + /* Erase by page by page to be done*/ + for(address = pEraseInit->PageAddress; + address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE); + address += FLASH_PAGE_SIZE) + { + FLASH_PageErase(address); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = address; + break; + } + } + } + } + else +#endif /* FLASH_BANK2_END */ + { + /* Page Erase requested on address located on bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + /* Erase page by page to be done*/ + for(address = pEraseInit->PageAddress; + address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress); + address += FLASH_PAGE_SIZE) + { + FLASH_PageErase(address); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = address; + break; + } + } + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* If procedure already ongoing, reject the next one */ + if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + +#if defined(FLASH_BANK2_END) + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); + +#endif + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; + FLASH_MassErase(pEraseInit->Banks); + } + else + { + /* Erase by page to be done*/ + + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + + pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE; + pFlash.DataRemaining = pEraseInit->NbPages; + pFlash.Address = pEraseInit->PageAddress; + + /*Erase 1st page and wait for IT*/ + FLASH_PageErase(pEraseInit->PageAddress); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions + * @brief Option Bytes Programming functions + * +@verbatim + ============================================================================== + ##### Option Bytes Programming functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + option bytes operations. + +@endverbatim + * @{ + */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_FLASHEx_OBErase(void) +{ + uint8_t rdptmp = OB_RDP_LEVEL_0; + HAL_StatusTypeDef status = HAL_ERROR; + + /* Get the actual read protection Option Byte value */ + rdptmp = FLASH_OB_GetRDP(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Restore the last read protection Option Byte value */ + status = FLASH_OB_RDP_LevelConfig(rdptmp); + } + } + + /* Return the erase status */ + return status; +} + +/** + * @brief Program option bytes + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Write protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /* Enable of Write protection on the selected page */ + status = FLASH_OB_EnableWRP(pOBInit->WRPPage); + } + else + { + /* Disable of Write protection on the selected page */ + status = FLASH_OB_DisableWRP(pOBInit->WRPPage); + } + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) + { + status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* USER configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) + { + status = FLASH_OB_UserConfig(pOBInit->USERConfig); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* DATA configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA) + { + status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER; + + /*Get WRP*/ + pOBInit->WRPPage = FLASH_OB_GetWRP(); + + /*Get RDP Level*/ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /*Get USER*/ + pOBInit->USERConfig = FLASH_OB_GetUser(); +} + +/** + * @brief Get the Option byte user data + * @param DATAAdress Address of the option byte DATA + * This parameter can be one of the following values: + * @arg @ref OB_DATA_ADDRESS_DATA0 + * @arg @ref OB_DATA_ADDRESS_DATA1 + * @retval Value programmed in USER data + */ +uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress) +{ + uint32_t value = 0; + + if (DATAAdress == OB_DATA_ADDRESS_DATA0) + { + /* Get value programmed in OB USER Data0 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT; + } + else + { + /* Get value programmed in OB USER Data1 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT; + } + + return value; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Full erase of FLASH memory Bank + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg @ref FLASH_BANK_1 Bank1 to be erased + @if STM32F101xG + * @arg @ref FLASH_BANK_2 Bank2 to be erased + * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased + @endif + @if STM32F103xG + * @arg @ref FLASH_BANK_2 Bank2 to be erased + * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased + @endif + * + * @retval None + */ +static void FLASH_MassErase(uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined(FLASH_BANK2_END) + if(Banks == FLASH_BANK_BOTH) + { + /* bank1 & bank2 will be erased*/ + SET_BIT(FLASH->CR, FLASH_CR_MER); + SET_BIT(FLASH->CR2, FLASH_CR2_MER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + SET_BIT(FLASH->CR2, FLASH_CR2_STRT); + } + else if(Banks == FLASH_BANK_2) + { + /*Only bank2 will be erased*/ + SET_BIT(FLASH->CR2, FLASH_CR2_MER); + SET_BIT(FLASH->CR2, FLASH_CR2_STRT); + } + else + { +#endif /* FLASH_BANK2_END */ +#if !defined(FLASH_BANK2_END) + /* Prevent unused argument(s) compilation warning */ + UNUSED(Banks); +#endif /* FLASH_BANK2_END */ + /* Only bank1 will be erased*/ + SET_BIT(FLASH->CR, FLASH_CR_MER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +#if defined(FLASH_BANK2_END) + } +#endif /* FLASH_BANK2_END */ +} + +/** + * @brief Enable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write protected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFF; +#if defined(FLASH_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFF; +#endif /* FLASH_WRP1_WRP1 */ +#if defined(FLASH_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFF; +#endif /* FLASH_WRP2_WRP2 */ +#if defined(FLASH_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFF; +#endif /* FLASH_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be protected ******/ + WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage)); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES64TO95MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U); +#endif /* OB_WRP_PAGES64TO95MASK */ +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES96TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO255MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO511MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES96TO127MASK */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + /* Enable write protection */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 &= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP0_WRP0 */ + +#if defined(FLASH_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 &= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP1_WRP1 */ + +#if defined(FLASH_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 &= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP2_WRP2 */ + +#if defined(FLASH_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 &= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Disable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write unprotected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFF; +#if defined(FLASH_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFF; +#endif /* FLASH_WRP1_WRP1 */ +#if defined(FLASH_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFF; +#endif /* FLASH_WRP2_WRP2 */ +#if defined(FLASH_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFF; +#endif /* FLASH_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be unprotected ******/ + WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES64TO95MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U); +#endif /* OB_WRP_PAGES64TO95MASK */ +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES96TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO255MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO511MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES96TO127MASK */ + + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 |= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP0_WRP0 */ + +#if defined(FLASH_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 |= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP1_WRP1 */ + +#if defined(FLASH_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 |= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP2_WRP2 */ + +#if defined(FLASH_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 |= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* FLASH_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + return status; +} + +/** + * @brief Set the read protection level. + * @param ReadProtectLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + + WRITE_REG(OB->RDP, ReadProtectLevel); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Program the FLASH User Option Byte. + * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param UserConfig The FLASH User Option Bytes values FLASH_OBR_IWDG_SW(Bit2), + * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4). + * And BFBF2(Bit5) for STM32F101xG and STM32F103xG . + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW))); + assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST))); + assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST))); +#if defined(FLASH_BANK2_END) + assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET))); +#endif /* FLASH_BANK2_END */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_BANK2_END) + OB->USER = (UserConfig | 0xF0U); +#else + OB->USER = (UserConfig | 0x88U); +#endif /* FLASH_BANK2_END */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + + return status; +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param Address specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data specifies the data to be programmed. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enables the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @retval The FLASH Write Protection Option Bytes value + */ +static uint32_t FLASH_OB_GetWRP(void) +{ + /* Return the FLASH write protection Register value */ + return (uint32_t)(READ_REG(FLASH->WRPR)); +} + +/** + * @brief Returns the FLASH Read Protection level. + * @retval FLASH RDP level + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t readstatus = OB_RDP_LEVEL_0; + uint32_t tmp_reg = 0U; + + /* Read RDP level bits */ + tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT); + + if (tmp_reg == FLASH_OBR_RDPRT) + { + readstatus = OB_RDP_LEVEL_1; + } + else + { + readstatus = OB_RDP_LEVEL_0; + } + + return readstatus; +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values: FLASH_OBR_IWDG_SW(Bit2), + * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4). + * And FLASH_OBR_BFB2(Bit5) for STM32F101xG and STM32F103xG . + */ +static uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Erase the specified FLASH memory page + * @param PageAddress FLASH page to erase + * The value of this parameter depend on device used within the same series + * + * @retval None + */ +void FLASH_PageErase(uint32_t PageAddress) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined(FLASH_BANK2_END) + if(PageAddress > FLASH_BANK1_END) + { + /* Proceed to erase the page */ + SET_BIT(FLASH->CR2, FLASH_CR2_PER); + WRITE_REG(FLASH->AR2, PageAddress); + SET_BIT(FLASH->CR2, FLASH_CR2_STRT); + } + else + { +#endif /* FLASH_BANK2_END */ + /* Proceed to erase the page */ + SET_BIT(FLASH->CR, FLASH_CR_PER); + WRITE_REG(FLASH->AR, PageAddress); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +#if defined(FLASH_BANK2_END) + } +#endif /* FLASH_BANK2_END */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c new file mode 100644 index 0000000..cd3563a --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c @@ -0,0 +1,587 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each + port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software + in several modes: + (+) Input mode + (+) Analog mode + (+) Output mode + (+) Alternate function mode + (+) External interrupt/event lines + + [..] + During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + [..] + All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + [..] + In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + [..] + All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + [..] + The external interrupt/event controller consists of up to 20 edge detectors in connectivity + line devices, or 19 edge detectors in other devices for generating event/interrupt requests. + Each input line can be independently configured to select the type (event or interrupt) and + the corresponding trigger event (rising or falling or both). Each line can also masked + independently. A pending register maintains the status line of the interrupt requests + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO APB2 clock using the following function : __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PD0 and PD1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE 0x00000003u +#define EXTI_MODE 0x10000000u +#define GPIO_MODE_IT 0x00010000u +#define GPIO_MODE_EVT 0x00020000u +#define RISING_EDGE 0x00100000u +#define FALLING_EDGE 0x00200000u +#define GPIO_OUTPUT_TYPE 0x00000010u + +#define GPIO_NUMBER 16u + +/* Definitions for bit manipulation of CRL and CRH register */ +#define GPIO_CR_MODE_INPUT 0x00000000u /*!< 00: Input mode (reset state) */ +#define GPIO_CR_CNF_ANALOG 0x00000000u /*!< 00: Analog mode */ +#define GPIO_CR_CNF_INPUT_FLOATING 0x00000004u /*!< 01: Floating input (reset state) */ +#define GPIO_CR_CNF_INPUT_PU_PD 0x00000008u /*!< 10: Input with pull-up / pull-down */ +#define GPIO_CR_CNF_GP_OUTPUT_PP 0x00000000u /*!< 00: General purpose output push-pull */ +#define GPIO_CR_CNF_GP_OUTPUT_OD 0x00000004u /*!< 01: General purpose output Open-drain */ +#define GPIO_CR_CNF_AF_OUTPUT_PP 0x00000008u /*!< 10: Alternate function output Push-pull */ +#define GPIO_CR_CNF_AF_OUTPUT_OD 0x0000000Cu /*!< 11: Alternate function output Open-drain */ + +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize and de-initialize the GPIOs + to be ready for use. + +@endverbatim + * @{ + */ + + +/** + * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t ioposition; + uint32_t iocurrent; + uint32_t temp; + uint32_t config = 0x00u; + __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */ + uint32_t registeroffset; /* offset used during computation of CNF and MODE bits placement inside CRL or CRH register */ + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get the IO position */ + ioposition = (0x01uL << position); + + /* Get the current IO position */ + iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; + + if (iocurrent == ioposition) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + + /* Based on the required mode, filling config variable with MODEy[1:0] and CNFy[3:2] corresponding bits */ + switch (GPIO_Init->Mode) + { + /* If we are configuring the pin in OUTPUT push-pull mode */ + case GPIO_MODE_OUTPUT_PP: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_PP; + break; + + /* If we are configuring the pin in OUTPUT open-drain mode */ + case GPIO_MODE_OUTPUT_OD: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_OD; + break; + + /* If we are configuring the pin in ALTERNATE FUNCTION push-pull mode */ + case GPIO_MODE_AF_PP: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_PP; + break; + + /* If we are configuring the pin in ALTERNATE FUNCTION open-drain mode */ + case GPIO_MODE_AF_OD: + /* Check the GPIO speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_OD; + break; + + /* If we are configuring the pin in INPUT (also applicable to EVENT and IT mode) */ + case GPIO_MODE_INPUT: + case GPIO_MODE_IT_RISING: + case GPIO_MODE_IT_FALLING: + case GPIO_MODE_IT_RISING_FALLING: + case GPIO_MODE_EVT_RISING: + case GPIO_MODE_EVT_FALLING: + case GPIO_MODE_EVT_RISING_FALLING: + /* Check the GPIO pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + if (GPIO_Init->Pull == GPIO_NOPULL) + { + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_FLOATING; + } + else if (GPIO_Init->Pull == GPIO_PULLUP) + { + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; + + /* Set the corresponding ODR bit */ + GPIOx->BSRR = ioposition; + } + else /* GPIO_PULLDOWN */ + { + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; + + /* Reset the corresponding ODR bit */ + GPIOx->BRR = ioposition; + } + break; + + /* If we are configuring the pin in INPUT analog mode */ + case GPIO_MODE_ANALOG: + config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_ANALOG; + break; + + /* Parameters are checked with assert_param */ + default: + break; + } + + /* Check if the current bit belongs to first half or last half of the pin count number + in order to address CRH or CRL register*/ + configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH; + registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2u) : ((position - 8u) << 2u); + + /* Apply the new configuration of the pin to the register */ + MODIFY_REG((*configregister), ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset), (config << registeroffset)); + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + /* Enable AFIO Clock */ + __HAL_RCC_AFIO_CLK_ENABLE(); + temp = AFIO->EXTICR[position >> 2u]; + CLEAR_BIT(temp, (0x0Fu) << (4u * (position & 0x03u))); + SET_BIT(temp, (GPIO_GET_INDEX(GPIOx)) << (4u * (position & 0x03u))); + AFIO->EXTICR[position >> 2u] = temp; + + + /* Configure the interrupt mask */ + if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + SET_BIT(EXTI->IMR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->IMR, iocurrent); + } + + /* Configure the event mask */ + if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + SET_BIT(EXTI->EMR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->EMR, iocurrent); + } + + /* Enable or disable the rising trigger */ + if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + SET_BIT(EXTI->RTSR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->RTSR, iocurrent); + } + + /* Enable or disable the falling trigger */ + if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + SET_BIT(EXTI->FTSR, iocurrent); + } + else + { + CLEAR_BIT(EXTI->FTSR, iocurrent); + } + } + } + + position++; + } +} + +/** + * @brief De-initializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */ + uint32_t registeroffset; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = AFIO->EXTICR[position >> 2u]; + tmp &= 0x0FuL << (4u * (position & 0x03u)); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) + { + tmp = 0x0FuL << (4u * (position & 0x03u)); + CLEAR_BIT(AFIO->EXTICR[position >> 2u], tmp); + + /* Clear EXTI line configuration */ + CLEAR_BIT(EXTI->IMR, (uint32_t)iocurrent); + CLEAR_BIT(EXTI->EMR, (uint32_t)iocurrent); + + /* Clear Rising Falling edge configuration */ + CLEAR_BIT(EXTI->RTSR, (uint32_t)iocurrent); + CLEAR_BIT(EXTI->FTSR, (uint32_t)iocurrent); + } + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Check if the current bit belongs to first half or last half of the pin count number + in order to address CRH or CRL register */ + configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH; + registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2u) : ((position - 8u) << 2u); + + /* CRL/CRH default value is floating input(0x04) shifted to correct position */ + MODIFY_REG(*configregister, ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset), GPIO_CRL_CNF0_0 << registeroffset); + + /* ODR default value is 0 */ + CLEAR_BIT(GPIOx->ODR, iocurrent); + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read and Write + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the GPIOs. + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Sets or clears the selected data port bit. + * + * @note This function uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState: specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BSRR = (uint32_t)GPIO_Pin << 16u; + } +} + +/** + * @brief Toggles the specified GPIO pin + * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral + * @param GPIO_Pin: Specifies the pins to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Ouput Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Locks GPIO Pins configuration registers. +* @note The locking mechanism allows the IO configuration to be frozen. When the LOCK sequence +* has been applied on a port bit, it is no longer possible to modify the value of the port bit until +* the next reset. +* @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral +* @param GPIO_Pin: specifies the port bit to be locked. +* This parameter can be any combination of GPIO_Pin_x where x can be (0..15). +* @retval None +*/ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + SET_BIT(tmp, GPIO_Pin); + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((uint32_t)(GPIOx->LCKR & GPIO_LCKR_LCKK)) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief This function handles EXTI interrupt request. + * @param GPIO_Pin: Specifies the pins connected EXTI line + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callbacks. + * @param GPIO_Pin: Specifies the pins connected EXTI line + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c new file mode 100644 index 0000000..c2d810c --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c @@ -0,0 +1,127 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_gpio_ex.c + * @author MCD Application Team + * @brief GPIO Extension HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) extension peripheral. + * + Extended features functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral extension features ##### + ============================================================================== + [..] GPIO module on STM32F1 family, manage also the AFIO register: + (+) Possibility to use the EVENTOUT Cortex feature + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to use EVENTOUT Cortex feature + (#) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout() + (#) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout() + (#) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout() + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/** @defgroup GPIOEx_Exported_Functions GPIOEx Exported Functions + * @{ + */ + +/** @defgroup GPIOEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + ============================================================================== + ##### Extended features functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout() + (+) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout() + (+) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout() + +@endverbatim + * @{ + */ + +/** + * @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected. + * @param GPIO_PortSource Select the port used to output the Cortex EVENTOUT signal. + * This parameter can be a value of @ref GPIOEx_EVENTOUT_PORT. + * @param GPIO_PinSource Select the pin used to output the Cortex EVENTOUT signal. + * This parameter can be a value of @ref GPIOEx_EVENTOUT_PIN. + * @retval None + */ +void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource) +{ + /* Verify the parameters */ + assert_param(IS_AFIO_EVENTOUT_PORT(GPIO_PortSource)); + assert_param(IS_AFIO_EVENTOUT_PIN(GPIO_PinSource)); + + /* Apply the new configuration */ + MODIFY_REG(AFIO->EVCR, (AFIO_EVCR_PORT) | (AFIO_EVCR_PIN), (GPIO_PortSource) | (GPIO_PinSource)); +} + +/** + * @brief Enables the Event Output. + * @retval None + */ +void HAL_GPIOEx_EnableEventout(void) +{ + SET_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); +} + +/** + * @brief Disables the Event Output. + * @retval None + */ +void HAL_GPIOEx_DisableEventout(void) +{ + CLEAR_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c new file mode 100644 index 0000000..7a3657a --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c @@ -0,0 +1,2564 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB) || defined (USB_OTG_FS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ +#if defined (USB_OTG_FS) +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +#endif /* defined (USB) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ +#if defined (USB_OTG_FS) + USB_OTG_GlobalTypeDef *USBx; +#endif /* defined (USB_OTG_FS) */ + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + +#if defined (USB_OTG_FS) + USBx = hpcd->Instance; +#endif /* defined (USB_OTG_FS) */ + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + +#if defined (USB_OTG_FS) + /* Disable DMA mode for FS instance */ + if ((USBx->CID & (0x1U << 8)) == 0U) + { + hpcd->Init.dma_enable = 0U; + } +#endif /* defined (USB_OTG_FS) */ + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /*Init the Core (common init.) */ + if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Force Device Mode*/ + (void)USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE); + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + hpcd->IN_ep[i].tx_fifo_num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; + (void)USB_DevDisconnect(hpcd->Instance); + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callabck is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_ENABLE(hpcd); + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 1U); +#endif /* defined (USB) */ + + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 0U); +#endif /* defined (USB) */ + + (void)USB_DevDisconnect(hpcd->Instance); + +#if defined (USB_OTG_FS) + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); +#endif /* defined (USB_OTG_FS) */ + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +#if defined (USB_OTG_FS) +/** + * @brief Handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i, ep_intr, epint, epnum; + uint32_t fifoemptymsk, temp; + USB_OTG_EPTypeDef *ep; + + /* ensure that we are in device mode */ + if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) + { + /* avoid spurious interrupt */ + if (__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) + { + return; + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) + { + /* incorrect mode, acknowledge the interrupt */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); + } + + /* Handle RxQLevel Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) + { + USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + + temp = USBx->GRXSTSP; + + ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM]; + + if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) + { + if ((temp & USB_OTG_GRXSTSP_BCNT) != 0U) + { + (void)USB_ReadPacket(USBx, ep->xfer_buff, + (uint16_t)((temp & USB_OTG_GRXSTSP_BCNT) >> 4)); + + ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + } + } + else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) + { + (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + } + else + { + /* ... */ + } + USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) + { + epnum = 0U; + + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) + { + epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); + (void)PCD_EP_OutXfrComplete_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); + /* Class B setup phase done for previous decoded setup */ + (void)PCD_EP_OutSetupPacket_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); + } + + /* Clear Status Phase Received interrupt */ + if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + + /* Clear OUT NAK interrupt */ + if ((epint & USB_OTG_DOEPINT_NAK) == USB_OTG_DOEPINT_NAK) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_NAK); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) + { + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); + + epnum = 0U; + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) /* In ITR */ + { + epint = USB_ReadDevInEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); + } + if ((epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); + } + if ((epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); + } + if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); + } + if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) + { + (void)PCD_WriteEmptyTxFifo(hpcd, epnum); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + /* Handle Resume Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) + { + /* Clear the Remote Wake-up Signaling */ + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); + } + + /* Handle Suspend Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) + { + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); + } + /* Handle Reset Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) + { + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + USBx_INEP(i)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + } + USBx_DEVICE->DAINTMSK |= 0x10001U; + + if (hpcd->Init.use_dedicated_ep1 != 0U) + { + USBx_DEVICE->DOUTEP1MSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM; + + USBx_DEVICE->DINEP1MSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + else + { + USBx_DEVICE->DOEPMSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM | + USB_OTG_DOEPMSK_OTEPSPRM | + USB_OTG_DOEPMSK_NAKM; + + USBx_DEVICE->DIEPMSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + + /* Set Default Address to 0 */ + USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; + + /* setup EP0 to receive SETUP packets */ + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); + } + + /* Handle Enumeration done Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) + { + (void)USB_ActivateSetup(hpcd->Instance); + hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance); + + /* Set USB Turnaround time */ + (void)USB_SetTurnaroundTime(hpcd->Instance, + HAL_RCC_GetHCLKFreq(), + (uint8_t)hpcd->Init.speed); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); + } + + /* Handle SOF Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); + } + + /* Handle Incomplete ISO IN Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) + { + /* Keep application checking the corresponding Iso IN endpoint + causing the incomplete Interrupt */ + epnum = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); + } + + /* Handle Incomplete ISO OUT Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) + { + /* Keep application checking the corresponding Iso OUT endpoint + causing the incomplete Interrupt */ + epnum = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); + } + + /* Handle Connection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ConnectCallback(hpcd); +#else + HAL_PCD_ConnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); + } + + /* Handle Disconnection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) + { + temp = hpcd->Instance->GOTGINT; + + if ((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DisconnectCallback(hpcd); +#else + HAL_PCD_DisconnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + hpcd->Instance->GOTGINT |= temp; + } + } +} + + +/** + * @brief Handles PCD Wakeup interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + /* Clear EXTI pending Bit */ + __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG(); +} +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +/** + * @brief This function handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + uint16_t store_ep[8]; + uint8_t i; + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + (void)PCD_EP_ISR_Handler(hpcd); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + (void)HAL_PCD_SetAddress(hpcd, 0U); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) + { + hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_LP_MODE); + hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_FSUSP); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) + { + /* WA: To Clear Wakeup flag if raised with suspend signal */ + + /* Store Endpoint register */ + for (i = 0U; i < 8U; i++) + { + store_ep[i] = PCD_GET_ENDPOINT(hpcd->Instance, i); + } + + /* FORCE RESET */ + hpcd->Instance->CNTR |= (uint16_t)(USB_CNTR_FRES); + + /* CLEAR RESET */ + hpcd->Instance->CNTR &= (uint16_t)(~USB_CNTR_FRES); + + /* wait for reset flag in ISTR */ + while ((hpcd->Instance->ISTR & USB_ISTR_RESET) == 0U) + { + } + + /* Clear Reset Flag */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + + /* Restore Registre */ + for (i = 0U; i < 8U; i++) + { + PCD_SET_ENDPOINT(hpcd->Instance, i, store_ep[i]); + } + + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_FSUSP; + + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + + hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_LP_MODE; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); + } +} + + +/** + * @brief Handles PCD Wakeup interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + /* Clear EXTI pending Bit */ + __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG(); +} +#endif /* defined (USB) */ + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 1U); +#endif /* defined (USB) */ + + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + +#if defined (USB) + HAL_PCDEx_SetConnectionState(hpcd, 0U); +#endif /* defined (USB) */ + + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + if (ep->is_in != 0U) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; +#if defined (USB) + ep->xfer_fill_db = 1U; + ep->xfer_len_db = len; +#endif /* defined (USB) */ + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x80U) == 0x80U) + { + (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); + } + else + { + (void)USB_FlushRxFifo(hpcd->Instance); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) +{ + return hpcd->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ +#if defined (USB_OTG_FS) +/** + * @brief Check FIFO for the next packet to be loaded. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t len; + uint32_t len32b; + uint32_t fifoemptymsk; + + ep = &hpcd->IN_ep[epnum]; + + if (ep->xfer_count > ep->xfer_len) + { + return HAL_ERROR; + } + + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + + len32b = (len + 3U) / 4U; + + while (((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= len32b) && + (ep->xfer_count < ep->xfer_len) && (ep->xfer_len != 0U)) + { + /* Write the FIFO */ + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + len32b = (len + 3U) / 4U; + + (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len); + + ep->xfer_buff += len; + ep->xfer_count += len; + } + + if (ep->xfer_len <= ep->xfer_count) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT transfer complete interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if (gSNPSiD == USB_OTG_CORE_ID_310A) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT setup packet received interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + + /* Inform the upper layer that a setup packet is available */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +/** + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + PCD_EPTypeDef *ep; + uint16_t count, wIstr, wEPVal, TxByteNbre; + uint8_t epindex; + + /* stay in loop while pending interrupts */ + while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) + { + wIstr = hpcd->Instance->ISTR; + + /* extract highest priority endpoint number */ + epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); + + if (epindex == 0U) + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0U) + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + ep = &hpcd->IN_ep[0]; + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff += ep->xfer_count; + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, 0U); +#else + HAL_PCD_DataInStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) + { + hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); + hpcd->USB_Address = 0U; + } + } + else + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if ((wEPVal & USB_EP_SETUP) != 0U) + { + /* Get SETUP Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + ep->pmaadress, (uint16_t)ep->xfer_count); + + /* SETUP bit kept frozen while CTR_RX = 1 */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Process SETUP Packet*/ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else if ((wEPVal & USB_EP_CTR_RX) != 0U) + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Get Control Data OUT Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + ep->pmaadress, (uint16_t)ep->xfer_count); + + ep->xfer_buff += ep->xfer_count; + + /* Process Control Data OUT Packet */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, 0U); +#else + HAL_PCD_DataOutStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } + } + } + else + { + /* Decode and service non control endpoints interrupt */ + /* process related endpoint register */ + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); + + if ((wEPVal & USB_EP_CTR_RX) != 0U) + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); + ep = &hpcd->OUT_ep[epindex]; + + /* OUT Single Buffering */ + if (ep->doublebuffer == 0U) + { + count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + } + } + else + { + /* manage double buffer bulk out */ + if (ep->type == EP_TYPE_BULK) + { + count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); + } + else /* manage double buffer iso out */ + { + /* free EP OUT Buffer */ + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + + if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) + { + /* read from endpoint BUF0Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /* read from endpoint BUF1Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + } + } + /* multi-packet on the NON control OUT endpoint */ + ep->xfer_count += count; + ep->xfer_buff += count; + + if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) + { + /* RX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataOutStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + (void) USB_EPStartXfer(hpcd->Instance, ep); + } + + } + + if ((wEPVal & USB_EP_CTR_TX) != 0U) + { + ep = &hpcd->IN_ep[epindex]; + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); + + /* Manage all non bulk transaction or Bulk Single Buffer Transaction */ + if ((ep->type != EP_TYPE_BULK) || + ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Transfer is not yet Done */ + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + } + /* bulk in double buffer enable in case of transferLen> Ep_Mps */ + else + { + (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); + } + } + } + } + + return HAL_OK; +} + + +/** + * @brief Manage double buffer bulk out transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint16_t count; + + /* Manage Buffer0 OUT */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + /* Get count of received Data on buffer0 */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK to OUT endpoint since double buffer is enabled */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /* Check if Buffer1 is in blocked sate which requires to toggle */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + /* Manage Buffer 1 DTOG_RX=0 */ + else + { + /* Get count of received data */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK on the current endpoint */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /*Need to FreeUser Buffer*/ + if ((wEPVal & USB_EP_DTOG_TX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + + return count; +} + + +/** + * @brief Manage double buffer bulk IN transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint32_t len; + uint16_t TxByteNbre; + + /* Data Buffer0 ACK received */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + ep->xfer_fill_db = 0U; + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Write remaining Data to Buffer */ + /* Set the Double buffer counter for pma buffer1 */ + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); + } + } + } + else /* Data Buffer1 ACK received */ + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + /*need to Free USB Buff*/ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + ep->xfer_fill_db = 0; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy the user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); + } + } + } + + /*enable endpoint IN*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + + return HAL_OK; +} + +#endif /* defined (USB) */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c new file mode 100644 index 0000000..234b52c --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c @@ -0,0 +1,244 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB) || defined (USB_OTG_FS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ +#if defined (USB_OTG_FS) +/** + * @brief Set Tx FIFO + * @param hpcd PCD handle + * @param fifo The number of Tx fifo + * @param size Fifo size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) +{ + uint8_t i; + uint32_t Tx_Offset; + + /* TXn min size = 16 words. (n : Transmit FIFO index) + When a TxFIFO is not used, the Configuration should be as follows: + case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txm can use the space allocated for Txn. + case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txn should be configured with the minimum space of 16 words + The FIFO is used optimally when used TxFIFOs are allocated in the top + of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. + When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ + + Tx_Offset = hpcd->Instance->GRXFSIZ; + + if (fifo == 0U) + { + hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; + } + else + { + Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; + for (i = 0U; i < (fifo - 1U); i++) + { + Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); + } + + /* Multiply Tx_Size by 2 to get higher performance */ + hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; + } + + return HAL_OK; +} + +/** + * @brief Set Rx FIFO + * @param hpcd PCD handle + * @param size Size of Rx fifo + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) +{ + hpcd->Instance->GRXFSIZ = size; + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) */ +#if defined (USB) +/** + * @brief Configure PMA for EP + * @param hpcd Device instance + * @param ep_addr endpoint address + * @param ep_kind endpoint Kind + * USB_SNG_BUF: Single Buffer used + * USB_DBL_BUF: Double Buffer used + * @param pmaadress: EP address in The PMA: In case of single buffer endpoint + * this parameter is 16-bit value providing the address + * in PMA allocated to endpoint. + * In case of double buffer endpoint this parameter + * is a 32-bit value providing the endpoint buffer 0 address + * in the LSB part of 32-bit value and endpoint buffer 1 address + * in the MSB part of 32-bit value. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress) +{ + PCD_EPTypeDef *ep; + + /* initialize ep structure*/ + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + { + /* Single Buffer */ + ep->doublebuffer = 0U; + /* Configure the PMA */ + ep->pmaadress = (uint16_t)pmaadress; + } + else /* USB_DBL_BUF */ + { + /* Double Buffer Endpoint */ + ep->doublebuffer = 1U; + /* Configure the PMA */ + ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); + ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); + } + + return HAL_OK; +} + +/** + * @brief Software Device Connection, + * this function is not required by USB OTG FS peripheral, it is used + * only by USB Device FS peripheral. + * @param hpcd PCD handle + * @param state connection state (0 : disconnected / 1: connected) + * @retval None + */ +__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(state); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PCDEx_SetConnectionState could be implemented in the user file + */ +} +#endif /* defined (USB) */ + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c new file mode 100644 index 0000000..c757976 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c @@ -0,0 +1,621 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT 0x00010000U +#define PVD_MODE_EVT 0x00020000U +#define PVD_RISING_EDGE 0x00000001U +#define PVD_FALLING_EDGE 0x00000002U +/** + * @} + */ + + +/** @defgroup PWR_register_alias_address PWR Register alias address + * @{ + */ +/* ------------- PWR registers bit address in the alias region ---------------*/ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) +#define PWR_CR_OFFSET 0x00U +#define PWR_CSR_OFFSET 0x04U +#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) +#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) +/** + * @} + */ + +/** @defgroup PWR_CR_register_alias PWR CR Register alias address + * @{ + */ +/* --- CR Register ---*/ +/* Alias word address of LPSDSR bit */ +#define LPSDSR_BIT_NUMBER PWR_CR_LPDS_Pos +#define CR_LPSDSR_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPSDSR_BIT_NUMBER * 4U))) + +/* Alias word address of DBP bit */ +#define DBP_BIT_NUMBER PWR_CR_DBP_Pos +#define CR_DBP_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))) + +/* Alias word address of PVDE bit */ +#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos +#define CR_PVDE_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))) + +/** + * @} + */ + +/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address + * @{ + */ + +/* --- CSR Register ---*/ +/* Alias word address of EWUP1 bit */ +#define CSR_EWUP_BB(VAL) ((uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (POSITION_VAL(VAL) * 4U))) +/** + * @} + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup PWR_Private_Functions PWR Private Functions + * brief WFE cortex command overloaded for HAL_PWR_EnterSTOPMode usage only (see Workaround section) + * @{ + */ +static void PWR_OverloadWfe(void); + +/* Private functions ---------------------------------------------------------*/ +__NOINLINE +static void PWR_OverloadWfe(void) +{ + __asm volatile( "wfe" ); + __asm volatile( "nop" ); +} + +/** + * @} + */ + + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + After reset, the backup domain (RTC registers, RTC backup data + registers) is protected against possible unwanted + write accesses. + To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() macro. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @brief Enables access to the backup domain (RTC registers, RTC + * backup data registers ). + * @note If the HSE divided by 128 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + /* Enable access to RTC and backup registers */ + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables access to the backup domain (RTC registers, RTC + * backup data registers). + * @note If the HSE divided by 128 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + /* Disable access to RTC and backup registers */ + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; +} + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). + + (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line16 and can generate an interrupt if enabled. This is done through + __HAL_PVD_EXTI_ENABLE_IT() macro. + (+) The PVD is stopped in Standby mode. + + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pin is used to wake up the system from Standby mode. This pin is + forced in input pull-down configuration and is active on rising edges. + (+) There is one WakeUp pin: + WakeUp Pin 1 on PA.00. + + [..] + + *** Low Power modes configuration *** + ===================================== + [..] + The device features 3 low-power modes: + (+) Sleep mode: CPU clock off, all peripherals including Cortex-M3 core peripherals like + NVIC, SysTick, etc. are kept running + (+) Stop mode: All clocks are stopped + (+) Standby mode: 1.8V domain powered off + + + *** Sleep mode *** + ================== + [..] + (+) Entry: + The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx) + functions with + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + + (+) Exit: + (++) WFI entry mode, Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + (++) WFE entry mode, Any wakeup event can wake up the device from Sleep mode. + (+++) Any peripheral interrupt w/o NVIC configuration & SEVONPEND bit set in the Cortex (HAL_PWR_EnableSEVOnPend) + (+++) Any EXTI Line (Internal or External) configured in Event mode + + *** Stop mode *** + ================= + [..] + The Stop mode is based on the Cortex-M3 deepsleep mode combined with peripheral + clock gating. The voltage regulator can be configured either in normal or low-power mode. + In Stop mode, all clocks in the 1.8 V domain are stopped, the PLL, the HSI and the HSE RC + oscillators are disabled. SRAM and register contents are preserved. + In Stop mode, all I/O pins keep the same state as in Run mode. + + (+) Entry: + The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_REGULATOR_VALUE, PWR_SLEEPENTRY_WFx ) + function with: + (++) PWR_REGULATOR_VALUE= PWR_MAINREGULATOR_ON: Main regulator ON. + (++) PWR_REGULATOR_VALUE= PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON. + (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction + (+) Exit: + (++) WFI entry mode, Any EXTI Line (Internal or External) configured in Interrupt mode with NVIC configured + (++) WFE entry mode, Any EXTI Line (Internal or External) configured in Event mode. + + *** Standby mode *** + ==================== + [..] + The Standby mode allows to achieve the lowest power consumption. It is based on the + Cortex-M3 deepsleep mode, with the voltage regulator disabled. The 1.8 V domain is + consequently powered off. The PLL, the HSI oscillator and the HSE oscillator are also + switched off. SRAM and register contents are lost except for registers in the Backup domain + and Standby circuitry + + (+) Entry: + (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. + (+) Exit: + (++) WKUP pin rising edge, RTC alarm event rising edge, external Reset in + NRSTpin, IWDG Reset + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + + (+) The MCU can be woken up from low-power mode by an RTC Alarm event, + without depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop and Standby modes + + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to + configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. + + *** PWR Workarounds linked to Silicon Limitation *** + ==================================================== + [..] + Below the list of all silicon limitations known on STM32F1xx prouct. + + (#)Workarounds Implemented inside PWR HAL Driver + (##)Debugging Stop mode with WFE entry - overloaded the WFE by an internal function + +@endverbatim + * @{ + */ + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration + * information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @retval None + */ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } +} + +/** + * @brief Enables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + /* Enable the power voltage detector */ + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + /* Disable the power voltage detector */ + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; +} + +/** + * @brief Enables the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Enable the EWUPx pin */ + *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)ENABLE; +} + +/** + * @brief Disables the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Disable the EWUPx pin */ + *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)DISABLE; +} + +/** + * @brief Enters Sleep mode. + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * @param Regulator: Regulator state as no effect in SLEEP mode - allows to support portability from legacy software + * @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction. + * When WFI entry is used, tick interrupt have to be disabled if not desired as + * the interrupt wake up source. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + /* No check on Regulator because parameter not used in SLEEP mode */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Regulator); + + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + +/** + * @brief Enters Stop mode. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by using an interrupt or a wakeup event, + * HSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * @param Regulator: Specifies the regulator state in Stop mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON + * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON + * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction + * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Clear PDDS bit in PWR register to specify entering in STOP mode when CPU enter in Deepsleep */ + CLEAR_BIT(PWR->CR, PWR_CR_PDDS); + + /* Select the voltage regulator mode by setting LPDS bit in PWR register according to Regulator parameter value */ + MODIFY_REG(PWR->CR, PWR_CR_LPDS, Regulator); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + PWR_OverloadWfe(); /* WFE redefine locally */ + PWR_OverloadWfe(); /* WFE redefine locally */ + } + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Enters Standby mode. + * @note In Standby mode, all I/O pins are high impedance except for: + * - Reset pad (still available) + * - TAMPER pin if configured for tamper or calibration out. + * - WKUP pin (PA0) if enabled. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Select Standby mode */ + SET_BIT(PWR->CR, PWR_CR_PDDS); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + + +/** + * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Enables CORTEX M3 SEVONPEND bit. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disables CORTEX M3 SEVONPEND bit. + * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWR_PVD_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PWR Exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); + } +} + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PWR_PVDCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c new file mode 100644 index 0000000..95b5568 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c @@ -0,0 +1,1403 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is enabled, + and all peripherals are off except internal SRAM, Flash and JTAG. + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in input floating state, except the JTAG pins which + are assigned to be used for debug purpose. + [..] Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals whose clocks are not + derived from the System clock (I2S, RTC, ADC, USB OTG FS) + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC +* @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +static void RCC_Delay(uint32_t mdelay); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1 + and APB2). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 24 MHz (STM32F100xx) or 4 to 16 MHz (STM32F101x/STM32F102x/STM32F103x) or 3 to 25 MHz (STM32F105x/STM32F107x) crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL (clocked by HSI or HSE), featuring different output clocks: + (++) The first output is used to generate the high speed system clock (up to 72 MHz for STM32F10xxx or up to 24 MHz for STM32F100xx) + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz) + + (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() + and if a HSE clock failure occurs(HSE used directly or through PLL as System + clock source), the System clocks automatically switched to HSI and an interrupt + is generated if enabled. The interrupt is linked to the Cortex-M3 NMI + (Non-Maskable Interrupt) exception vector. + + (#) MCO1 (microcontroller clock output), used to output SYSCLK, HSI, + HSE or PLL clock (divided by 2) on PA8 pin + PLL2CLK, PLL3CLK/2, PLL3CLK and XTI for STM32F105x/STM32F107x + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + (+@) RTC: RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 128. + (+@) USB OTG FS and RTC: USB OTG FS require a frequency equal to 48 MHz + to work correctly. This clock is derived of the main PLL through PLL Multiplier. + (+@) I2S interface on STM32F105x/STM32F107x can be derived from PLL3CLK + (+@) IWDG clock which is always the LSI clock. + + (#) For STM32F10xxx, the maximum frequency of the SYSCLK and HCLK/PCLK2 is 72 MHz, PCLK1 36 MHz. + For STM32F100xx, the maximum frequency of the SYSCLK and HCLK/PCLK1/PCLK2 is 24 MHz. + Depending on the SYSCLK frequency, the flash latency should be adapted accordingly. + @endverbatim + * @{ + */ + +/* + Additional consideration on the SYSCLK based on Latency settings: + +-----------------------------------------------+ + | Latency | SYSCLK clock frequency (MHz) | + |---------------|-------------------------------| + |0WS(1CPU cycle)| 0 < SYSCLK <= 24 | + |---------------|-------------------------------| + |1WS(2CPU cycle)| 24 < SYSCLK <= 48 | + |---------------|-------------------------------| + |2WS(3CPU cycle)| 48 < SYSCLK <= 72 | + +-----------------------------------------------+ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL, PLL2 and PLL3 are OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS and MCO1 OFF + * - All interrupts disabled + * - All flags are cleared + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL_StatusTypeDef + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Set HSION bit */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM bits to the reset value */ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (0x10U << RCC_CR_HSITRIM_Pos)); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Wait till clock switch is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Second step is to clear PLLON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Ensure to reset PLLSRC and PLLMUL bits */ + CLEAR_REG(RCC->CFGR); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset HSEON & CSSON bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + +#if defined(RCC_PLL2_SUPPORT) + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLL2ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); + + /* Wait till PLL2 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } +#endif /* RCC_PLL2_SUPPORT */ + +#if defined(RCC_PLLI2S_SUPPORT) + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLL3ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); + + /* Wait till PLL3 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL3RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_CFGR2_PREDIV1) + /* Reset CFGR2 register */ + CLEAR_REG(RCC->CFGR2); +#endif /* RCC_CFGR2_PREDIV1 */ + + /* Reset all CSR flags */ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIR); + + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note The PLL is not disabled when USB OTG FS clock is enabled (specific to devices with USB FS) + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t pll_config; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + { + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI_DIV2))) + { + /* When HSI is used as system clock it will not disabled */ + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* To have a fully stabilized clock in the specified range, a software delay of 1ms + should be added.*/ + RCC_Delay(1); + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Require to disable power clock if necessary */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + +#if defined(RCC_CR_PLL2ON) + /*-------------------------------- PLL2 Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL2(RCC_OscInitStruct->PLL2.PLL2State)); + if ((RCC_OscInitStruct->PLL2.PLL2State) != RCC_PLL2_NONE) + { + /* This bit can not be cleared if the PLL2 clock is used indirectly as system + clock (i.e. it is used as PLL clock entry that is used as system clock). */ + if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ + (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ + ((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) + { + return HAL_ERROR; + } + else + { + if ((RCC_OscInitStruct->PLL2.PLL2State) == RCC_PLL2_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(RCC_OscInitStruct->PLL2.PLL2MUL)); + assert_param(IS_RCC_HSE_PREDIV2(RCC_OscInitStruct->PLL2.HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLLI2S is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != RCC_OscInitStruct->PLL2.HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(RCC_OscInitStruct->PLL2.HSEPrediv2Value); + + /* Configure the main PLL2 multiplication factors. */ + __HAL_RCC_PLL2_CONFIG(RCC_OscInitStruct->PLL2.PLL2MUL); + + /* Enable the main PLL2. */ + __HAL_RCC_PLL2_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Set PREDIV1 source to HSE */ + CLEAR_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC); + + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + +#endif /* RCC_CR_PLL2ON */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv factor --------------------------------*/ + /* It can be written only when the PLL is disabled. Not used in PLL source is different than HSE */ + if (RCC_OscInitStruct->PLL.PLLSource == RCC_PLLSOURCE_HSE) + { + /* Check the parameter */ + assert_param(IS_RCC_HSE_PREDIV(RCC_OscInitStruct->HSEPredivValue)); +#if defined(RCC_CFGR2_PREDIV1SRC) + assert_param(IS_RCC_PREDIV1_SOURCE(RCC_OscInitStruct->Prediv1Source)); + + /* Set PREDIV1 source */ + SET_BIT(RCC->CFGR2, RCC_OscInitStruct->Prediv1Source); +#endif /* RCC_CFGR2_PREDIV1SRC */ + + /* Set PREDIV1 Value */ + __HAL_RCC_HSE_PREDIV_CONFIG(RCC_OscInitStruct->HSEPredivValue); + } + + /* Configure the main PLL clock source and multiplication factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLMUL); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->CFGR; + if ((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_CFGR_PLLMULL) != RCC_OscInitStruct->PLL.PLLMUL)) + { + return HAL_ERROR; + } + } + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * The value of this parameter depend on device used within the same series + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) of the device. */ + +#if defined(FLASH_ACR_LATENCY) + /* Increasing the number of wait states because of higher CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } +} + +#endif /* FLASH_ACR_LATENCY */ +/*-------------------------- HCLK Configuration --------------------------*/ +if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APBx dividers in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); + } + + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + return HAL_ERROR; + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + +#if defined(FLASH_ACR_LATENCY) + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } +} +#endif /* FLASH_ACR_LATENCY */ + +/*-------------------------- PCLK1 Configuration ---------------------------*/ +if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3)); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]; + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick(uwTickPrio); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * + @verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + + @endverbatim + * @{ + */ + +/** + * @brief Selects the clock source to output on MCO pin. + * @note MCO pin should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + @if STM32F105xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source + @endif + @if STM32F107xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source + * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source + @endif + * @param RCC_MCODiv specifies the MCO DIV. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef gpio = {0U}; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(RCC_MCOx); + UNUSED(RCC_MCODiv); + + /* Configure the MCO1 pin in alternate function mode */ + gpio.Mode = GPIO_MODE_AF_PP; + gpio.Speed = GPIO_SPEED_FREQ_HIGH; + gpio.Pull = GPIO_NOPULL; + gpio.Pin = MCO1_PIN; + + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + + HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio); + + /* Configure the MCO clock source */ + __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv); +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M3 NMI (Non-Maskable Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; +} + +/** + * @brief Returns the SYSCLK frequency + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) + * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) or HSI_VALUE(*) multiplied by the PLL factor. + * @note (*) HSI_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ +#if defined(RCC_CFGR2_PREDIV1SRC) + const uint8_t aPLLMULFactorTable[14] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 13}; + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; +#else + const uint8_t aPLLMULFactorTable[16] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16}; +#if defined(RCC_CFGR2_PREDIV1) + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; +#else + const uint8_t aPredivFactorTable[2] = {1, 2}; +#endif /*RCC_CFGR2_PREDIV1*/ + +#endif + uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; + uint32_t sysclockfreq = 0U; +#if defined(RCC_CFGR2_PREDIV1SRC) + uint32_t prediv2 = 0U, pll2mul = 0U; +#endif /*RCC_CFGR2_PREDIV1SRC*/ + + tmpreg = RCC->CFGR; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + { + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + break; + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos]; + if ((tmpreg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) + { +#if defined(RCC_CFGR2_PREDIV1) + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> RCC_CFGR2_PREDIV1_Pos]; +#else + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos]; +#endif /*RCC_CFGR2_PREDIV1*/ +#if defined(RCC_CFGR2_PREDIV1SRC) + + if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) + { + /* PLL2 selected as Prediv1 source */ + /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> RCC_CFGR2_PLL2MUL_Pos) + 2; + pllclk = (uint32_t)(((uint64_t)HSE_VALUE * (uint64_t)pll2mul * (uint64_t)pllmul) / ((uint64_t)prediv2 * (uint64_t)prediv)); + } + else + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE * pllmul) / prediv); + } + + /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */ + /* In this case need to divide pllclk by 2 */ + if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> RCC_CFGR_PLLMULL_Pos]) + { + pllclk = pllclk / 2; + } +#else + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE * pllmul) / prediv); +#endif /*RCC_CFGR2_PREDIV1SRC*/ + } + else + { + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul); + } + sysclockfreq = pllclk; + break; + } + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: /* HSI used as system clock */ + { + sysclockfreq = HSI_VALUE; + break; + } + } + return sysclockfreq; +} + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos]); +} + +/** + * @brief Returns the PCLK2 frequency + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos]); +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \ + | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; + +#if defined(RCC_CFGR2_PREDIV1SRC) + /* Get the Prediv1 source --------------------------------------------------*/ + RCC_OscInitStruct->Prediv1Source = READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC); +#endif /* RCC_CFGR2_PREDIV1SRC */ + + /* Get the HSE configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + RCC_OscInitStruct->HSEPredivValue = __HAL_RCC_HSE_GET_PREDIV(); + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR & RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); + + /* Get the LSE configuration -----------------------------------------------*/ + if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + + /* Get the PLL configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMULL); +#if defined(RCC_CR_PLL2ON) + /* Get the PLL2 configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLL2ON) == RCC_CR_PLL2ON) + { + RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_ON; + } + else + { + RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_OFF; + } + RCC_OscInitStruct->PLL2.HSEPrediv2Value = __HAL_RCC_HSE_GET_PREDIV2(); + RCC_OscInitStruct->PLL2.PLL2MUL = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PLL2MUL); +#endif /* RCC_CR_PLL2ON */ +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * contains the current clock configuration. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != NULL); + assert_param(pFLatency != NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3); + +#if defined(FLASH_ACR_LATENCY) + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +#else + /* For VALUE lines devices, only LATENCY_0 can be set*/ + *pFLatency = (uint32_t)FLASH_LATENCY_0; +#endif +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief This function provides delay (in milliseconds) based on CPU cycles method. + * @param mdelay: specifies the delay time length, in milliseconds. + * @retval None + */ +static void RCC_Delay(uint32_t mdelay) +{ + __IO uint32_t Delay = mdelay * (SystemCoreClock / 8U / 1000U); + do + { + __NOP(); + } + while (Delay --); +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c new file mode 100644 index 0000000..4719727 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c @@ -0,0 +1,863 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/** @defgroup RCCEx RCCEx + * @brief RCC Extension HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) are set to their reset values. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the + * RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks(RTC clock). + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) are set to their reset values. + * + * @note In case of STM32F105xC or STM32F107xC devices, PLLI2S will be enabled if requested on + * one of 2 I2S interfaces. When PLLI2S is enabled, you need to call HAL_RCCEx_DisablePLLI2S to + * manually disable it. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U, temp_reg = 0U; +#if defined(STM32F105xC) || defined(STM32F107xC) + uint32_t pllactive = 0U; +#endif /* STM32F105xC || STM32F107xC */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*------------------------------- RTC/LCD Configuration ------------------------*/ + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + FlagStatus pwrclkchanged = RESET; + + /* As soon as function is called to change RTC clock source, activation of the + power domain is done. */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL); + if ((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = temp_reg; + + /* Wait for LSERDY if LSE was enabled */ + if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON)) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + + /* Require to disable power clock if necessary */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*------------------------------ ADC clock Configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCPLLCLK_DIV(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + } + +#if defined(STM32F105xC) || defined(STM32F107xC) + /*------------------------------ I2S2 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection)); + + /* Configure the I2S2 clock source */ + __HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection); + } + + /*------------------------------ I2S3 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S3CLKSOURCE(PeriphClkInit->I2s3ClockSelection)); + + /* Configure the I2S3 clock source */ + __HAL_RCC_I2S3_CONFIG(PeriphClkInit->I2s3ClockSelection); + } + + /*------------------------------ PLL I2S Configuration ----------------------*/ + /* Check that PLLI2S need to be enabled */ + if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S2SRC) || HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) + { + /* Update flag to indicate that PLL I2S should be active */ + pllactive = 1; + } + + /* Check if PLL I2S need to be enabled */ + if (pllactive == 1) + { + /* Enable PLL I2S only if not active */ + if (HAL_IS_BIT_CLR(RCC->CR, RCC_CR_PLL3ON)) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLI2S_MUL(PeriphClkInit->PLLI2S.PLLI2SMUL)); + assert_param(IS_RCC_HSE_PREDIV2(PeriphClkInit->PLLI2S.HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLL2 is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != PeriphClkInit->PLLI2S.HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(PeriphClkInit->PLLI2S.HSEPrediv2Value); + + /* Configure the main PLLI2S multiplication factors. */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SMUL); + + /* Enable the main PLLI2S. */ + __HAL_RCC_PLLI2S_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Return an error only if user wants to change the PLLI2SMUL whereas PLLI2S is active */ + if (READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL3MUL) != PeriphClkInit->PLLI2S.PLLI2SMUL) + { + return HAL_ERROR; + } + } + } +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + /*------------------------------ USB clock Configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBPLLCLK_DIV(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + } +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + + return HAL_OK; +} + +/** + * @brief Get the PeriphClkInit according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks(RTC, I2S, ADC clocks). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t srcclk = 0U; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC; + + /* Get the RTC configuration -----------------------------------------------*/ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + /* Source clock is LSE or LSI*/ + PeriphClkInit->RTCClockSelection = srcclk; + + /* Get the ADC clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC; + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); + +#if defined(STM32F105xC) || defined(STM32F107xC) + /* Get the I2S2 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; + PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE(); + + /* Get the I2S3 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3; + PeriphClkInit->I2s3ClockSelection = __HAL_RCC_GET_I2S3_SOURCE(); + +#endif /* STM32F105xC || STM32F107xC */ + +#if defined(STM32F103xE) || defined(STM32F103xG) + /* Get the I2S2 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; + PeriphClkInit->I2s2ClockSelection = RCC_I2S2CLKSOURCE_SYSCLK; + + /* Get the I2S3 clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3; + PeriphClkInit->I2s3ClockSelection = RCC_I2S3CLKSOURCE_SYSCLK; + +#endif /* STM32F103xE || STM32F103xG */ + +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + /* Get the USB clock configuration -----------------------------------------*/ + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +} + +/** + * @brief Returns the peripheral clock frequency + * @note Returns 0 if peripheral clock is unknown + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + @if STM32F103xE + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + @endif + @if STM32F103xG + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + @endif + @if STM32F105xC + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F107xC + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F102xx + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F103xx + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + * @retval Frequency in Hz (0: means that no available frequency for the peripheral) + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ +#if defined(STM32F105xC) || defined(STM32F107xC) + const uint8_t aPLLMULFactorTable[14] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 13}; + const uint8_t aPredivFactorTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; + + uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U; + uint32_t pll2mul = 0U, pll3mul = 0U, prediv2 = 0U; +#endif /* STM32F105xC || STM32F107xC */ +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || \ + defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + const uint8_t aPLLMULFactorTable[16] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16}; + const uint8_t aPredivFactorTable[2] = {1, 2}; + + uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U; +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ + uint32_t temp_reg = 0U, frequency = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + switch (PeriphClk) + { +#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ + || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ + || defined(STM32F105xC) || defined(STM32F107xC) + case RCC_PERIPHCLK_USB: + { + /* Get RCC configuration ------------------------------------------------------*/ + temp_reg = RCC->CFGR; + + /* Check if PLL is enabled */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLON)) + { + pllmul = aPLLMULFactorTable[(uint32_t)(temp_reg & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos]; + if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) + { +#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ + || defined(STM32F100xE) + prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> RCC_CFGR2_PREDIV1_Pos]; +#else + prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos]; +#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ + +#if defined(STM32F105xC) || defined(STM32F107xC) + if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) + { + /* PLL2 selected as Prediv1 source */ + /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> RCC_CFGR2_PLL2MUL_Pos) + 2; + pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv1) * pllmul); + } + else + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul); + } + + /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */ + /* In this case need to divide pllclk by 2 */ + if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> RCC_CFGR_PLLMULL_Pos]) + { + pllclk = pllclk / 2; + } +#else + if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ + pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul); + } +#endif /* STM32F105xC || STM32F107xC */ + } + else + { + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul); + } + + /* Calcul of the USB frequency*/ +#if defined(STM32F105xC) || defined(STM32F107xC) + /* USBCLK = PLLVCO = (2 x PLLCLK) / USB prescaler */ + if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL_DIV2) + { + /* Prescaler of 2 selected for USB */ + frequency = pllclk; + } + else + { + /* Prescaler of 3 selected for USB */ + frequency = (2 * pllclk) / 3; + } +#else + /* USBCLK = PLLCLK / USB prescaler */ + if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL) + { + /* No prescaler selected for USB */ + frequency = pllclk; + } + else + { + /* Prescaler of 1.5 selected for USB */ + frequency = (pllclk * 2) / 3; + } +#endif + } + break; + } +#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ +#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) + case RCC_PERIPHCLK_I2S2: + { +#if defined(STM32F103xE) || defined(STM32F103xG) + /* SYSCLK used as source clock for I2S2 */ + frequency = HAL_RCC_GetSysClockFreq(); +#else + if (__HAL_RCC_GET_I2S2_SOURCE() == RCC_I2S2CLKSOURCE_SYSCLK) + { + /* SYSCLK used as source clock for I2S2 */ + frequency = HAL_RCC_GetSysClockFreq(); + } + else + { + /* Check if PLLI2S is enabled */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON)) + { + /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2; + frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul)); + } + } +#endif /* STM32F103xE || STM32F103xG */ + break; + } + case RCC_PERIPHCLK_I2S3: + { +#if defined(STM32F103xE) || defined(STM32F103xG) + /* SYSCLK used as source clock for I2S3 */ + frequency = HAL_RCC_GetSysClockFreq(); +#else + if (__HAL_RCC_GET_I2S3_SOURCE() == RCC_I2S3CLKSOURCE_SYSCLK) + { + /* SYSCLK used as source clock for I2S3 */ + frequency = HAL_RCC_GetSysClockFreq(); + } + else + { + /* Check if PLLI2S is enabled */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON)) + { + /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */ + prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1; + pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2; + frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul)); + } + } +#endif /* STM32F103xE || STM32F103xG */ + break; + } +#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ + case RCC_PERIPHCLK_RTC: + { + /* Get RCC BDCR configuration ------------------------------------------------------*/ + temp_reg = RCC->BDCR; + + /* Check if LSE is ready if RTC clock selection is LSE */ + if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready if RTC clock selection is LSI */ + else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) + { + frequency = LSI_VALUE; + } + else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_HSE_DIV128) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY))) + { + frequency = HSE_VALUE / 128U; + } + /* Clock not enabled for RTC*/ + else + { + /* nothing to do: frequency already initialized to 0U */ + } + break; + } + case RCC_PERIPHCLK_ADC: + { + frequency = HAL_RCC_GetPCLK2Freq() / (((__HAL_RCC_GET_ADC_SOURCE() >> RCC_CFGR_ADCPRE_Pos) + 1) * 2); + break; + } + default: + { + break; + } + } + return (frequency); +} + +/** + * @} + */ + +#if defined(STM32F105xC) || defined(STM32F107xC) +/** @defgroup RCCEx_Exported_Functions_Group2 PLLI2S Management function + * @brief PLLI2S Management functions + * +@verbatim + =============================================================================== + ##### Extended PLLI2S Management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PLLI2S + activation or deactivation +@endverbatim + * @{ + */ + +/** + * @brief Enable PLLI2S + * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that + * contains the configuration information for the PLLI2S + * @note The PLLI2S configuration not modified if used by I2S2 or I2S3 Interface. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) +{ + uint32_t tickstart = 0U; + + /* Check that PLL I2S has not been already enabled by I2S2 or I2S3*/ + if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLI2S_MUL(PLLI2SInit->PLLI2SMUL)); + assert_param(IS_RCC_HSE_PREDIV2(PLLI2SInit->HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLL2 is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != PLLI2SInit->HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Disable the main PLLI2S. */ + __HAL_RCC_PLLI2S_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(PLLI2SInit->HSEPrediv2Value); + + + /* Configure the main PLLI2S multiplication factors. */ + __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SMUL); + + /* Enable the main PLLI2S. */ + __HAL_RCC_PLLI2S_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* PLLI2S cannot be modified as already used by I2S2 or I2S3 */ + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disable PLLI2S + * @note PLLI2S is not disabled if used by I2S2 or I2S3 Interface. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) +{ + uint32_t tickstart = 0U; + + /* Disable PLL I2S as not requested by I2S2 or I2S3*/ + if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) + { + /* Disable the main PLLI2S. */ + __HAL_RCC_PLLI2S_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLI2S is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* PLLI2S is currently used by I2S2 or I2S3. Cannot be disabled.*/ + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group3 PLL2 Management function + * @brief PLL2 Management functions + * +@verbatim + =============================================================================== + ##### Extended PLL2 Management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PLL2 + activation or deactivation +@endverbatim + * @{ + */ + +/** + * @brief Enable PLL2 + * @param PLL2Init pointer to an RCC_PLL2InitTypeDef structure that + * contains the configuration information for the PLL2 + * @note The PLL2 configuration not modified if used indirectly as system clock. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init) +{ + uint32_t tickstart = 0U; + + /* This bit can not be cleared if the PLL2 clock is used indirectly as system + clock (i.e. it is used as PLL clock entry that is used as system clock). */ + if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ + (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ + ((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) + { + return HAL_ERROR; + } + else + { + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(PLL2Init->PLL2MUL)); + assert_param(IS_RCC_HSE_PREDIV2(PLL2Init->HSEPrediv2Value)); + + /* Prediv2 can be written only when the PLLI2S is disabled. */ + /* Return an error only if new value is different from the programmed value */ + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON) && \ + (__HAL_RCC_HSE_GET_PREDIV2() != PLL2Init->HSEPrediv2Value)) + { + return HAL_ERROR; + } + + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the HSE prediv2 factor --------------------------------*/ + __HAL_RCC_HSE_PREDIV2_CONFIG(PLL2Init->HSEPrediv2Value); + + /* Configure the main PLL2 multiplication factors. */ + __HAL_RCC_PLL2_CONFIG(PLL2Init->PLL2MUL); + + /* Enable the main PLL2. */ + __HAL_RCC_PLL2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @brief Disable PLL2 + * @note PLL2 is not disabled if used indirectly as system clock. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void) +{ + uint32_t tickstart = 0U; + + /* This bit can not be cleared if the PLL2 clock is used indirectly as system + clock (i.e. it is used as PLL clock entry that is used as system clock). */ + if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ + (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ + ((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) + { + return HAL_ERROR; + } + else + { + /* Disable the main PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @} + */ +#endif /* STM32F105xC || STM32F107xC */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c new file mode 100644 index 0000000..f4e2e78 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c @@ -0,0 +1,7421 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_TIM_RegisterCallback() to register a callback. + @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_ALL: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + default: + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + default: + break; + } + + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK are relevant only for timer instances + * supporting a break input. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + break; + } + + default: + break; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */ + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */ + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */ + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */ + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */ + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */ + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */ + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */ + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */ + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + break; + } + return HAL_OK; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P); + tmpccer |= ((TIM_ICPolarity << 8U) & TIM_CCER_CC3P); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P); + tmpccer |= ((TIM_ICPolarity << 12U) & TIM_CCER_CC4P); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */ +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c new file mode 100644 index 0000000..3b2983a --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c @@ -0,0 +1,2296 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Timer remapping capabilities configuration + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + UNUSED(Remap); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c new file mode 100644 index 0000000..9d34ff9 --- /dev/null +++ b/Maple/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c @@ -0,0 +1,2673 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_usb.c + * @author MCD Application Team + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_LL_USB_DRIVER + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) +#if defined (USB) || defined (USB_OTG_FS) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +#if defined (USB_OTG_FS) +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + +/** @defgroup USB_LL_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret; + + if (cfg.phy_itface == USB_OTG_ULPI_PHY) + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Init The ULPI Interface */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); + + /* Select vbus source */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); + if (cfg.use_external_vbus == 1U) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD; + } + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + } + else /* FS interface (embedded Phy) */ + { + /* Select FS Embedded PHY */ + USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + + /* Activate the USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + + return ret; +} + + +/** + * @brief Set the USB turnaround time + * @param USBx USB Instance + * @param hclk: AHB clock frequency + * @retval USB turnaround time In PHY Clocks number + */ +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, + uint32_t hclk, uint8_t speed) +{ + uint32_t UsbTrd; + + /* The USBTRD is configured according to the tables below, depending on AHB frequency + used by application. In the low AHB frequency range it is used to stretch enough the USB response + time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access + latency to the Data FIFO */ + if (speed == USBD_FS_SPEED) + { + if ((hclk >= 14200000U) && (hclk < 15000000U)) + { + /* hclk Clock Range between 14.2-15 MHz */ + UsbTrd = 0xFU; + } + else if ((hclk >= 15000000U) && (hclk < 16000000U)) + { + /* hclk Clock Range between 15-16 MHz */ + UsbTrd = 0xEU; + } + else if ((hclk >= 16000000U) && (hclk < 17200000U)) + { + /* hclk Clock Range between 16-17.2 MHz */ + UsbTrd = 0xDU; + } + else if ((hclk >= 17200000U) && (hclk < 18500000U)) + { + /* hclk Clock Range between 17.2-18.5 MHz */ + UsbTrd = 0xCU; + } + else if ((hclk >= 18500000U) && (hclk < 20000000U)) + { + /* hclk Clock Range between 18.5-20 MHz */ + UsbTrd = 0xBU; + } + else if ((hclk >= 20000000U) && (hclk < 21800000U)) + { + /* hclk Clock Range between 20-21.8 MHz */ + UsbTrd = 0xAU; + } + else if ((hclk >= 21800000U) && (hclk < 24000000U)) + { + /* hclk Clock Range between 21.8-24 MHz */ + UsbTrd = 0x9U; + } + else if ((hclk >= 24000000U) && (hclk < 27700000U)) + { + /* hclk Clock Range between 24-27.7 MHz */ + UsbTrd = 0x8U; + } + else if ((hclk >= 27700000U) && (hclk < 32000000U)) + { + /* hclk Clock Range between 27.7-32 MHz */ + UsbTrd = 0x7U; + } + else /* if(hclk >= 32000000) */ + { + /* hclk Clock Range between 32-200 MHz */ + UsbTrd = 0x6U; + } + } + else + { + UsbTrd = USBD_DEFAULT_TRDT_VALUE; + } + + USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; + USBx->GUSBCFG |= (uint32_t)((UsbTrd << 10) & USB_OTG_GUSBCFG_TRDT); + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @arg USB_HOST_MODE Host mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode) +{ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); + + if (mode == USB_HOST_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; + } + else if (mode == USB_DEVICE_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + } + else + { + return HAL_ERROR; + } + HAL_Delay(50U); + + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB_OTG controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + for (i = 0U; i < 15U; i++) + { + USBx->DIEPTXF[i] = 0U; + } + + /* Enable HW VBUS sensing */ + USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + /* Device mode configuration */ + USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; + + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); + + /* Flush the FIFOs */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending Device Interrupts */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + if (i == 0U) + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_SNAK; + } + else + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK; + } + } + else + { + USBx_INEP(i)->DIEPCTL = 0U; + } + + USBx_INEP(i)->DIEPTSIZ = 0U; + USBx_INEP(i)->DIEPINT = 0xFB7FU; + } + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + if (i == 0U) + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_SNAK; + } + else + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK; + } + } + else + { + USBx_OUTEP(i)->DOEPCTL = 0U; + } + + USBx_OUTEP(i)->DOEPTSIZ = 0U; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xBFFFFFFFU; + + /* Enable the common interrupts */ + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + + /* Enable interrupts matching to the Device mode ONLY */ + USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | + USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT | + USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM | + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM; + + if (cfg.Sof_enable != 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; + } + + if (cfg.vbus_sensing_enable == 1U) + { + USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); + } + + return ret; +} + +/** + * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO + * @param USBx Selected device + * @param num FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) +{ + uint32_t count = 0U; + + USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); + + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo : Flush Rx FIFO + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t count = 0; + + USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; + + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_SetDevSpeed Initializes the DevSpd field of DCFG register + * depending the PHY type and the enumeration speed of the device. + * @param USBx Selected device + * @param speed device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @retval Hal status + */ +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG |= speed; + return HAL_OK; +} + +/** + * @brief USB_GetDevSpeed Return the Dev Speed + * @param USBx Selected device + * @retval speed device speed + * This parameter can be one of these values: + * @arg PCD_SPEED_FULL: Full speed mode + */ +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t speed; + uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; + + if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || + (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) + { + speed = USBD_FS_SPEED; + } + else + { + speed = 0xFU; + } + + return speed; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + } + else + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_USBAEP; + } + } + return HAL_OK; +} + +/** + * @brief Activate and configure a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DOEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP | + USB_OTG_DIEPCTL_MPSIZ | + USB_OTG_DIEPCTL_TXFNUM | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_EPTYP); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP | + USB_OTG_DOEPCTL_MPSIZ | + USB_OTG_DOEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_EPTYP); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer : setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + uint16_t pktcnt; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19)); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + + if (ep->type == EP_TYPE_ISOC) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); + } + } + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + if (ep->type != EP_TYPE_ISOC) + { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + else + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + + (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len); + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len == 0U) + { + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt); + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; + } + else + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; + } + } + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + +/** + * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + + if (ep->xfer_len > ep->maxpacket) + { + ep->xfer_len = ep->maxpacket; + } + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len > 0U) + { + ep->xfer_len = ep->maxpacket; + } + + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket)); + + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + +/** + * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated + * with the EP/channel + * @param USBx Selected device + * @param src pointer to source buffer + * @param ch_ep_num endpoint or host channel number + * @param len Number of bytes to write + * @retval HAL status + */ +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t *pSrc = (uint32_t *)src; + uint32_t count32b, i; + + count32b = ((uint32_t)len + 3U) / 4U; + for (i = 0U; i < count32b; i++) + { + USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); + pSrc++; + } + + return HAL_OK; +} + +/** + * @brief USB_ReadPacket : read a packet from the RX FIFO + * @param USBx Selected device + * @param dest source pointer + * @param len Number of bytes to read + * @retval pointer to destination buffer + */ +void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t *pDest = (uint32_t *)dest; + uint32_t i; + uint32_t count32b = ((uint32_t)len + 3U) / 4U; + + for (i = 0U; i < count32b; i++) + { + __UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U)); + pDest++; + } + + return ((void *)pDest); +} + +/** + * @brief USB_EPSetStall : set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); + } + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); + } + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall : Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_INEP(epnum)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + else + { + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + return HAL_OK; +} + +/** + * @brief USB_StopDevice : Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Clear Pending interrupt */ + for (i = 0U; i < 15U; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + /* Clear interrupt masks */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + /* Flush the FIFO */ + ret = USB_FlushRxFifo(USBx); + if (ret != HAL_OK) + { + return ret; + } + + ret = USB_FlushTxFifo(USBx, 0x10U); + if (ret != HAL_OK) + { + return ret; + } + + return ret; +} + +/** + * @brief USB_SetDevAddress : Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG &= ~(USB_OTG_DCFG_DAD); + USBx_DEVICE->DCFG |= ((uint32_t)address << 4) & USB_OTG_DCFG_DAD; + + return HAL_OK; +} + +/** + * @brief USB_DevConnect : Connect the USB device by enabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect : Disconnect the USB device by disabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts: return the global USB interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->GINTSTS; + tmpreg &= USBx->GINTMSK; + + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xffff0000U) >> 16); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xFFFFU)); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_OUTEP((uint32_t)epnum)->DOEPINT; + tmpreg &= USBx_DEVICE->DOEPMSK; + + return tmpreg; +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg, msk, emp; + + msk = USBx_DEVICE->DIEPMSK; + emp = USBx_DEVICE->DIEPEMPMSK; + msk |= ((emp >> (epnum & EP_ADDR_MSK)) & 0x1U) << 7; + tmpreg = USBx_INEP((uint32_t)epnum)->DIEPINT & msk; + + return tmpreg; +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx Selected device + * @param interrupt flag + * @retval None + */ +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) +{ + USBx->GINTSTS |= interrupt; +} + +/** + * @brief Returns USB core mode + * @param USBx Selected device + * @retval return core mode : Host or Device + * This parameter can be one of these values: + * 0 : Host + * 1 : Device + */ +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx) +{ + return ((USBx->GINTSTS) & 0x1U); +} + +/** + * @brief Activate EP0 for Setup transactions + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* Set the MPS of the IN EP0 to 64 bytes */ + USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; + + return HAL_OK; +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx Selected device + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup) +{ + UNUSED(psetup); + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + + if (gSNPSiD > USB_OTG_CORE_ID_300A) + { + if ((USBx_OUTEP(0U)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + return HAL_OK; + } + } + + USBx_OUTEP(0U)->DOEPTSIZ = 0U; + USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); + USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; + + return HAL_OK; +} + +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Core Soft Reset */ + count = 0U; + USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; + + do + { + if (++count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); + + return HAL_OK; +} + +/** + * @brief USB_HostInit : Initializes the USB OTG controller registers + * for Host mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + /* Disable VBUS sensing */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBUSASEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBUSBSEN); + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + + /* Make sure the FIFOs are flushed. */ + (void)USB_FlushTxFifo(USBx, 0x10U); /* all Tx FIFOs */ + (void)USB_FlushRxFifo(USBx); + + /* Clear all pending HC Interrupts */ + for (i = 0U; i < cfg.Host_channels; i++) + { + USBx_HC(i)->HCINT = 0xFFFFFFFFU; + USBx_HC(i)->HCINTMSK = 0U; + } + + /* Enable VBUS driving */ + (void)USB_DriveVbus(USBx, 1U); + + HAL_Delay(200U); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xFFFFFFFFU; + + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x80U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); + USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); + /* Enable the common interrupts */ + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + + /* Enable interrupts matching to the Host mode ONLY */ + USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ + USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); + + return HAL_OK; +} + +/** + * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the + * HCFG register on the PHY type and set the right frame interval + * @param USBx Selected device + * @param freq clock frequency + * This parameter can be one of these values: + * HCFG_48_MHZ : Full Speed 48 MHz Clock + * HCFG_6_MHZ : Low Speed 6 MHz Clock + * @retval HAL status + */ +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); + USBx_HOST->HCFG |= (uint32_t)freq & USB_OTG_HCFG_FSLSPCS; + + if (freq == HCFG_48_MHZ) + { + USBx_HOST->HFIR = 48000U; + } + else if (freq == HCFG_6_MHZ) + { + USBx_HOST->HFIR = 6000U; + } + else + { + /* ... */ + } + + return HAL_OK; +} + +/** + * @brief USB_OTG_ResetPort : Reset Host Port + * @param USBx Selected device + * @retval HAL status + * @note (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); + HAL_Delay(100U); /* See Note #1 */ + USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); + HAL_Delay(10U); + + return HAL_OK; +} + +/** + * @brief USB_DriveVbus : activate or de-activate vbus + * @param state VBUS state + * This parameter can be one of these values: + * 0 : Deactivate VBUS + * 1 : Activate VBUS + * @retval HAL status + */ +HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U)) + { + USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); + } + if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U)) + { + USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); + } + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx Selected device + * @retval speed : Host speed + * This parameter can be one of these values: + * @arg HCD_SPEED_FULL: Full speed mode + * @arg HCD_SPEED_LOW: Low speed mode + */ +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); +} + +/** + * @brief Return Host Current Frame number + * @param USBx Selected device + * @retval current frame number + */ +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); +} + +/** + * @brief Initialize a host channel + * @param USBx Selected device + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * @arg EP_TYPE_CTRL: Control type + * @arg EP_TYPE_ISOC: Isochronous type + * @arg EP_TYPE_BULK: Bulk type + * @arg EP_TYPE_INTR: Interrupt type + * @param mps Max Packet Size + * This parameter can be a value from 0 to32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t HCcharEpDir, HCcharLowSpeed; + + /* Clear old interrupt conditions for this host channel. */ + USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU; + + /* Enable channel interrupts required for this transfer. */ + switch (ep_type) + { + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_NAKM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + break; + + case EP_TYPE_INTR: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_NAKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + + break; + + case EP_TYPE_ISOC: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); + } + break; + + default: + ret = HAL_ERROR; + break; + } + + /* Enable the top level host channel interrupt. */ + USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); + + /* Make sure host channel interrupts are enabled. */ + USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; + + /* Program the HCCHAR register */ + if ((epnum & 0x80U) == 0x80U) + { + HCcharEpDir = (0x1U << 15) & USB_OTG_HCCHAR_EPDIR; + } + else + { + HCcharEpDir = 0U; + } + + if (speed == HPRT0_PRTSPD_LOW_SPEED) + { + HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV; + } + else + { + HCcharLowSpeed = 0U; + } + + USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) | + ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) | + (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | + ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | HCcharEpDir | HCcharLowSpeed; + + if (ep_type == EP_TYPE_INTR) + { + USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ; + } + + return ret; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx Selected device + * @param hc pointer to host channel structure + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t ch_num = (uint32_t)hc->ch_num; + static __IO uint32_t tmpreg = 0U; + uint8_t is_oddframe; + uint16_t len_words; + uint16_t num_packets; + uint16_t max_hc_pkt_count = 256U; + + /* Compute the expected number of packets associated to the transfer */ + if (hc->xfer_len > 0U) + { + num_packets = (uint16_t)((hc->xfer_len + hc->max_packet - 1U) / hc->max_packet); + + if (num_packets > max_hc_pkt_count) + { + num_packets = max_hc_pkt_count; + hc->xfer_len = (uint32_t)num_packets * hc->max_packet; + } + } + else + { + num_packets = 1U; + } + if (hc->ep_is_in != 0U) + { + hc->xfer_len = (uint32_t)num_packets * hc->max_packet; + } + + /* Initialize the HCTSIZn register */ + USBx_HC(ch_num)->HCTSIZ = (hc->xfer_len & USB_OTG_HCTSIZ_XFRSIZ) | + (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); + + is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; + USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; + USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; + + /* Set host channel enable */ + tmpreg = USBx_HC(ch_num)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + + /* make sure to set the correct ep direction */ + if (hc->ep_is_in != 0U) + { + tmpreg |= USB_OTG_HCCHAR_EPDIR; + } + else + { + tmpreg &= ~USB_OTG_HCCHAR_EPDIR; + } + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(ch_num)->HCCHAR = tmpreg; + + if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U)) + { + switch (hc->ep_type) + { + /* Non periodic transfer */ + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + + /* check if there is enough space in FIFO space */ + if (len_words > (USBx->HNPTXSTS & 0xFFFFU)) + { + /* need to process data in nptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; + } + break; + + /* Periodic transfer */ + case EP_TYPE_INTR: + case EP_TYPE_ISOC: + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + /* check if there is enough space in FIFO space */ + if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */ + { + /* need to process data in ptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; + } + break; + + default: + break; + } + + /* Write packet into the Tx FIFO. */ + (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len); + } + + return HAL_OK; +} + +/** + * @brief Read all host channel interrupts status + * @param USBx Selected device + * @retval HAL state + */ +uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return ((USBx_HOST->HAINT) & 0xFFFFU); +} + +/** + * @brief Halt a host channel + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t hcnum = (uint32_t)hc_num; + uint32_t count = 0U; + uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; + + /* Check for space in the request queue to issue the halt. */ + if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK)) + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; + do + { + if (++count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx_HOST->HPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; + do + { + if (++count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + + return HAL_OK; +} + +/** + * @brief Initiate Do Ping protocol + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t chnum = (uint32_t)ch_num; + uint32_t num_packets = 1U; + uint32_t tmpreg; + + USBx_HC(chnum)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + USB_OTG_HCTSIZ_DOPING; + + /* Set host channel enable */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t count = 0U; + uint32_t value; + uint32_t i; + + (void)USB_DisableGlobalInt(USBx); + + /* Flush FIFO */ + (void)USB_FlushTxFifo(USBx, 0x10U); + (void)USB_FlushRxFifo(USBx); + + /* Flush out any leftover queued requests. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value &= ~USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + } + + /* Halt all channels to put them into a known state. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value |= USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + + do + { + if (++count > 1000U) + { + break; + } + } while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + + /* Clear any pending Host interrupts */ + USBx_HOST->HAINT = 0xFFFFFFFFU; + USBx->GINTSTS = 0xFFFFFFFFU; + + (void)USB_EnableGlobalInt(USBx); + + return HAL_OK; +} + +/** + * @brief USB_ActivateRemoteWakeup active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; + } + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) */ + +#if defined (USB) +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(cfg); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM; + + /* Set interrupt mask */ + USBx->CNTR = (uint16_t)winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM; + + /* Clear interrupt mask */ + USBx->CNTR &= (uint16_t)(~winterruptmask); + + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of the these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(mode); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(cfg); + + /* Init Device */ + /* CNTR_FRES = 1 */ + USBx->CNTR = (uint16_t)USB_CNTR_FRES; + + /* CNTR_FRES = 0 */ + USBx->CNTR = 0U; + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + /*Set Btable Address*/ + USBx->BTABLE = BTABLE_ADDRESS; + + return HAL_OK; +} + +/** + * @brief USB_FlushTxFifo : Flush a Tx FIFO + * @param USBx : Selected device + * @param num : FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(num); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo : Flush Rx FIFO + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint16_t wEpRegVal; + + wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK; + + /* initialize Endpoint */ + switch (ep->type) + { + case EP_TYPE_CTRL: + wEpRegVal |= USB_EP_CONTROL; + break; + + case EP_TYPE_BULK: + wEpRegVal |= USB_EP_BULK; + break; + + case EP_TYPE_INTR: + wEpRegVal |= USB_EP_INTERRUPT; + break; + + case EP_TYPE_ISOC: + wEpRegVal |= USB_EP_ISOCHRONOUS; + break; + + default: + ret = HAL_ERROR; + break; + } + + PCD_SET_ENDPOINT(USBx, ep->num, (wEpRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); + + PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); + + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + /*Set the endpoint Transmit buffer address */ + PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + } + else + { + /*Set the endpoint Receive buffer address */ + PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); + + /*Set the endpoint Receive buffer counter*/ + PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure VALID status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + /*Double Buffer*/ + else + { + /* Set the endpoint as double buffered */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* Set buffer address for double buffered mode */ + PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1); + + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return ret; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + /*Double Buffer*/ + else + { + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + PCD_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + uint32_t len; + uint16_t pmabuffer; + uint16_t wEPVal; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /*Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + } + else + { + len = ep->xfer_len; + } + + /* configure and validate Tx endpoint */ + if (ep->doublebuffer == 0U) + { + USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len); + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + } + else + { + /* double buffer bulk management */ + if (ep->type == EP_TYPE_BULK) + { + if (ep->xfer_len_db > ep->maxpacket) + { + /* enable double buffer */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the two first buffer in the Buffer0 & Buffer1 */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + /* auto Switch to single buffer mode when transfer xfer_len_db; + + /* disable double buffer mode */ + PCD_CLEAR_EP_DBUF(USBx, ep->num); + + /* Set Tx count with nbre of byte to be transmitted */ + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + }/* end if bulk double buffer */ + + /* manage isochronous double buffer IN mode */ + else + { + /* Write the data to the USB endpoint */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + } + + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + PCD_FreeUserBuffer(USBx, ep->num, ep->is_in); + } + } + + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); + } + else /* OUT endpoint */ + { + if (ep->doublebuffer == 0U) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + /* configure and validate Rx endpoint */ + PCD_SET_EP_RX_CNT(USBx, ep->num, len); + } + else + { + /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */ + /* Set the Double buffer counter */ + if (ep->type == EP_TYPE_BULK) + { + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket); + + /* Coming from ISR */ + if (ep->xfer_count != 0U) + { + /* update last value to check if there is blocking state */ + wEPVal = PCD_GET_ENDPOINT(USBx, ep->num); + + /*Blocking State */ + if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || + (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) + { + PCD_FreeUserBuffer(USBx, ep->num, 0U); + } + } + } + /* iso out double */ + else if (ep->type == EP_TYPE_ISOC) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + } + else + { + return HAL_ERROR; + } + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + + return HAL_OK; +} + + +/** + * @brief USB_EPSetStall set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->is_in != 0U) + { + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL); + } + else + { + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL); + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure VALID status for the Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + + return HAL_OK; +} + +/** + * @brief USB_StopDevice Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx) +{ + /* disable all interrupts and force USB reset */ + USBx->CNTR = (uint16_t)USB_CNTR_FRES; + + /* clear interrupt status register */ + USBx->ISTR = 0U; + + /* switch-off device */ + USBx->CNTR = (uint16_t)(USB_CNTR_FRES | USB_CNTR_PDWN); + + return HAL_OK; +} + +/** + * @brief USB_SetDevAddress Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address) +{ + if (address == 0U) + { + /* set device address and enable function */ + USBx->DADDR = (uint16_t)USB_DADDR_EF; + } + + return HAL_OK; +} + +/** + * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts return the global USB interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts(USB_TypeDef *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->ISTR; + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt return the USB device OUT endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt return the USB device IN endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(epnum); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(epnum); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx Selected device + * @param interrupt flag + * @retval None + */ +void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(interrupt); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx Selected device + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(psetup); + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx) +{ + USBx->CNTR |= (uint16_t)USB_CNTR_RESUME; + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx) +{ + USBx->CNTR &= (uint16_t)(~USB_CNTR_RESUME); + + return HAL_OK; +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t n = ((uint32_t)wNBytes + 1U) >> 1; + uint32_t BaseAddr = (uint32_t)USBx; + uint32_t i, temp1, temp2; + __IO uint16_t *pdwVal; + uint8_t *pBuf = pbUsrBuf; + + pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); + + for (i = n; i != 0U; i--) + { + temp1 = *pBuf; + pBuf++; + temp2 = temp1 | ((uint16_t)((uint16_t) *pBuf << 8)); + *pdwVal = (uint16_t)temp2; + pdwVal++; + +#if PMA_ACCESS > 1U + pdwVal++; +#endif + + pBuf++; + } +} + +/** + * @brief Copy data from packet memory area (PMA) to user memory buffer + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t n = (uint32_t)wNBytes >> 1; + uint32_t BaseAddr = (uint32_t)USBx; + uint32_t i, temp; + __IO uint16_t *pdwVal; + uint8_t *pBuf = pbUsrBuf; + + pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); + + for (i = n; i != 0U; i--) + { + temp = *(__IO uint16_t *)pdwVal; + pdwVal++; + *pBuf = (uint8_t)((temp >> 0) & 0xFFU); + pBuf++; + *pBuf = (uint8_t)((temp >> 8) & 0xFFU); + pBuf++; + +#if PMA_ACCESS > 1U + pdwVal++; +#endif + } + + if ((wNBytes % 2U) != 0U) + { + temp = *pdwVal; + *pBuf = (uint8_t)((temp >> 0) & 0xFFU); + } +} +#endif /* defined (USB) */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB) || defined (USB_OTG_FS) */ +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Maple Debug.launch b/Maple/Maple Debug.launch new file mode 100644 index 0000000..819bf07 --- /dev/null +++ b/Maple/Maple Debug.launch @@ -0,0 +1,72 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Maple/Maple.ioc b/Maple/Maple.ioc new file mode 100644 index 0000000..65832e5 --- /dev/null +++ b/Maple/Maple.ioc @@ -0,0 +1,128 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +GPIO.groupedBy=Show All +KeepUserPlacement=false +Mcu.Family=STM32F1 +Mcu.IP0=NVIC +Mcu.IP1=RCC +Mcu.IP2=SYS +Mcu.IP3=USB +Mcu.IP4=USB_DEVICE +Mcu.IPNb=5 +Mcu.Name=STM32F103CBUx +Mcu.Package=UFQFPN48 +Mcu.Pin0=PD0-OSC_IN +Mcu.Pin1=PD1-OSC_OUT +Mcu.Pin2=PB1 +Mcu.Pin3=PA11 +Mcu.Pin4=PA12 +Mcu.Pin5=PA13 +Mcu.Pin6=PA14 +Mcu.Pin7=PB9 +Mcu.Pin8=VP_SYS_VS_Systick +Mcu.Pin9=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS +Mcu.PinsNb=10 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32F103CBUx +MxCube.Version=6.1.0 +MxDb.Version=DB.6.0.10 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +NVIC.USB_HP_CAN1_TX_IRQn=true\:0\:0\:false\:false\:true\:true\:true +NVIC.USB_LP_CAN1_RX0_IRQn=true\:0\:0\:false\:false\:true\:false\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PA11.Mode=Device +PA11.Signal=USB_DM +PA12.Mode=Device +PA12.Signal=USB_DP +PA13.Locked=true +PA13.Mode=Serial_Wire +PA13.Signal=SYS_JTMS-SWDIO +PA14.Locked=true +PA14.Mode=Serial_Wire +PA14.Signal=SYS_JTCK-SWCLK +PB1.GPIOParameters=GPIO_Label +PB1.GPIO_Label=LED +PB1.Locked=true +PB1.Signal=GPIO_Output +PB9.GPIOParameters=GPIO_Label +PB9.GPIO_Label=USBE +PB9.Locked=true +PB9.Signal=GPIO_Output +PD0-OSC_IN.Locked=true +PD0-OSC_IN.Mode=HSE-External-Oscillator +PD0-OSC_IN.Signal=RCC_OSC_IN +PD1-OSC_OUT.Locked=true +PD1-OSC_OUT.Mode=HSE-External-Oscillator +PD1-OSC_OUT.Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32F103CBUx +ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.8.3 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=Maple.ioc +ProjectManager.ProjectName=Maple +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=STM32CubeIDE +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false +RCC.ADCFreqValue=24000000 +RCC.AHBFreq_Value=48000000 +RCC.APB1CLKDivider=RCC_HCLK_DIV2 +RCC.APB1Freq_Value=24000000 +RCC.APB1TimFreq_Value=48000000 +RCC.APB2Freq_Value=48000000 +RCC.APB2TimFreq_Value=48000000 +RCC.FCLKCortexFreq_Value=48000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=48000000 +RCC.IPParameters=ADCFreqValue,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,VCOOutput2Freq_Value +RCC.MCOFreq_Value=48000000 +RCC.PLLCLKFreq_Value=48000000 +RCC.PLLMCOFreq_Value=24000000 +RCC.PLLMUL=RCC_PLL_MUL6 +RCC.SYSCLKFreq_VALUE=48000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.TimSysFreq_Value=48000000 +RCC.USBFreq_Value=48000000 +RCC.VCOOutput2Freq_Value=8000000 +USB_DEVICE.CLASS_NAME_FS=CDC +USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS,LANGID_STRING,PID_CDC_FS,VID +USB_DEVICE.LANGID_STRING=1031 +USB_DEVICE.PID_CDC_FS=0x5740 +USB_DEVICE.VID=0x483 +USB_DEVICE.VirtualMode=Cdc +USB_DEVICE.VirtualModeFS=Cdc_FS +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS +VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS +board=custom +isbadioc=false diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h b/Maple/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h new file mode 100644 index 0000000..6702b54 --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file usbd_cdc.h + * @author MCD Application Team + * @brief header file for the usbd_cdc.c file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CDC_H +#define __USB_CDC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup usbd_cdc + * @brief This file is the Header file for usbd_cdc.c + * @{ + */ + + +/** @defgroup usbd_cdc_Exported_Defines + * @{ + */ +#define CDC_IN_EP 0x81U /* EP1 for data IN */ +#define CDC_OUT_EP 0x01U /* EP1 for data OUT */ +#define CDC_CMD_EP 0x82U /* EP2 for CDC commands */ + +#ifndef CDC_HS_BINTERVAL +#define CDC_HS_BINTERVAL 0x10U +#endif /* CDC_HS_BINTERVAL */ + +#ifndef CDC_FS_BINTERVAL +#define CDC_FS_BINTERVAL 0x10U +#endif /* CDC_FS_BINTERVAL */ + +/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */ +#define CDC_DATA_HS_MAX_PACKET_SIZE 512U /* Endpoint IN & OUT Packet size */ +#define CDC_DATA_FS_MAX_PACKET_SIZE 64U /* Endpoint IN & OUT Packet size */ +#define CDC_CMD_PACKET_SIZE 8U /* Control Endpoint Packet size */ + +#define USB_CDC_CONFIG_DESC_SIZ 67U +#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE +#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE + +#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE +#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE + +/*---------------------------------------------------------------------*/ +/* CDC definitions */ +/*---------------------------------------------------------------------*/ +#define CDC_SEND_ENCAPSULATED_COMMAND 0x00U +#define CDC_GET_ENCAPSULATED_RESPONSE 0x01U +#define CDC_SET_COMM_FEATURE 0x02U +#define CDC_GET_COMM_FEATURE 0x03U +#define CDC_CLEAR_COMM_FEATURE 0x04U +#define CDC_SET_LINE_CODING 0x20U +#define CDC_GET_LINE_CODING 0x21U +#define CDC_SET_CONTROL_LINE_STATE 0x22U +#define CDC_SEND_BREAK 0x23U + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + +/** + * @} + */ +typedef struct +{ + uint32_t bitrate; + uint8_t format; + uint8_t paritytype; + uint8_t datatype; +} USBD_CDC_LineCodingTypeDef; + +typedef struct _USBD_CDC_Itf +{ + int8_t (* Init)(void); + int8_t (* DeInit)(void); + int8_t (* Control)(uint8_t cmd, uint8_t *pbuf, uint16_t length); + int8_t (* Receive)(uint8_t *Buf, uint32_t *Len); + +} USBD_CDC_ItfTypeDef; + + +typedef struct +{ + uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE / 4U]; /* Force 32bits alignment */ + uint8_t CmdOpCode; + uint8_t CmdLength; + uint8_t *RxBuffer; + uint8_t *TxBuffer; + uint32_t RxLength; + uint32_t TxLength; + + __IO uint32_t TxState; + __IO uint32_t RxState; +} +USBD_CDC_HandleTypeDef; + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ + +extern USBD_ClassTypeDef USBD_CDC; +#define USBD_CDC_CLASS &USBD_CDC +/** + * @} + */ + +/** @defgroup USB_CORE_Exported_Functions + * @{ + */ +uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops); + +uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length); + +uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff); + +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev); + +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_CDC_H */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c b/Maple/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c new file mode 100644 index 0000000..b27fb55 --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c @@ -0,0 +1,945 @@ +/** + ****************************************************************************** + * @file usbd_cdc.c + * @author MCD Application Team + * @brief This file provides the high layer firmware functions to manage the + * following functionalities of the USB CDC Class: + * - Initialization and Configuration of high and low layer + * - Enumeration as CDC Device (and enumeration for each implemented memory interface) + * - OUT/IN data transfer + * - Command IN transfer (class requests management) + * - Error management + * + * @verbatim + * + * =================================================================== + * CDC Class Driver Description + * =================================================================== + * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices + * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus + * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" + * This driver implements the following aspects of the specification: + * - Device descriptor management + * - Configuration descriptor management + * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) + * - Requests management (as described in section 6.2 in specification) + * - Abstract Control Model compliant + * - Union Functional collection (using 1 IN endpoint for control) + * - Data interface class + * + * These aspects may be enriched or modified for a specific user application. + * + * This driver doesn't implement the following aspects of the specification + * (but it is possible to manage these features with some modifications on this driver): + * - Any class-specific aspect relative to communication classes should be managed by user application. + * - All communication classes other than PSTN are not managed + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* BSPDependencies +- "stm32xxxxx_{eval}{discovery}{nucleo_144}.c" +- "stm32xxxxx_{eval}{discovery}_io.c" +EndBSPDependencies */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" +#include "usbd_ctlreq.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_CDC + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CDC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_FunctionPrototypes + * @{ + */ + + +static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev); + +static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length); + +static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length); + +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length); + +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = +{ + USB_LEN_DEV_QUALIFIER_DESC, + USB_DESC_TYPE_DEVICE_QUALIFIER, + 0x00, + 0x02, + 0x00, + 0x00, + 0x00, + 0x40, + 0x01, + 0x00, +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Variables + * @{ + */ + + +/* CDC interface class callbacks structure */ +USBD_ClassTypeDef USBD_CDC = +{ + USBD_CDC_Init, + USBD_CDC_DeInit, + USBD_CDC_Setup, + NULL, /* EP0_TxSent, */ + USBD_CDC_EP0_RxReady, + USBD_CDC_DataIn, + USBD_CDC_DataOut, + NULL, + NULL, + NULL, + USBD_CDC_GetHSCfgDesc, + USBD_CDC_GetFSCfgDesc, + USBD_CDC_GetOtherSpeedCfgDesc, + USBD_CDC_GetDeviceQualifierDescriptor, +}; + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + CDC_HS_BINTERVAL, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + CDC_FS_BINTERVAL, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + +__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + 0x09, /* bLength: Configuation Descriptor size */ + USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION, + USB_CDC_CONFIG_DESC_SIZ, + 0x00, + 0x02, /* bNumInterfaces: 2 interfaces */ + 0x01, /* bConfigurationValue: */ + 0x04, /* iConfiguration: */ + 0xC0, /* bmAttributes: */ + 0x32, /* MaxPower 100 mA */ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + CDC_FS_BINTERVAL, /* bInterval: */ + + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00 /* bInterval */ +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Functions + * @{ + */ + +/** + * @brief USBD_CDC_Init + * Initialize the CDC interface + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + uint8_t ret = 0U; + USBD_CDC_HandleTypeDef *hcdc; + + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK, + CDC_DATA_HS_IN_PACKET_SIZE); + + pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U; + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK, + CDC_DATA_HS_OUT_PACKET_SIZE); + + pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U; + + } + else + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK, + CDC_DATA_FS_IN_PACKET_SIZE); + + pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U; + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK, + CDC_DATA_FS_OUT_PACKET_SIZE); + + pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U; + } + /* Open Command IN EP */ + USBD_LL_OpenEP(pdev, CDC_CMD_EP, USBD_EP_TYPE_INTR, CDC_CMD_PACKET_SIZE); + pdev->ep_in[CDC_CMD_EP & 0xFU].is_used = 1U; + + pdev->pClassData = USBD_malloc(sizeof(USBD_CDC_HandleTypeDef)); + + if (pdev->pClassData == NULL) + { + ret = 1U; + } + else + { + hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + + /* Init physical Interface components */ + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init(); + + /* Init Xfer states */ + hcdc->TxState = 0U; + hcdc->RxState = 0U; + + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + } + return ret; +} + +/** + * @brief USBD_CDC_Init + * DeInitialize the CDC layer + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + uint8_t ret = 0U; + + /* Close EP IN */ + USBD_LL_CloseEP(pdev, CDC_IN_EP); + pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 0U; + + /* Close EP OUT */ + USBD_LL_CloseEP(pdev, CDC_OUT_EP); + pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 0U; + + /* Close Command IN EP */ + USBD_LL_CloseEP(pdev, CDC_CMD_EP); + pdev->ep_in[CDC_CMD_EP & 0xFU].is_used = 0U; + + /* DeInit physical Interface components */ + if (pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit(); + USBD_free(pdev->pClassData); + pdev->pClassData = NULL; + } + + return ret; +} + +/** + * @brief USBD_CDC_Setup + * Handle the CDC specific requests + * @param pdev: instance + * @param req: usb requests + * @retval status + */ +static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + uint8_t ifalt = 0U; + uint16_t status_info = 0U; + uint8_t ret = USBD_OK; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS : + if (req->wLength) + { + if (req->bmRequest & 0x80U) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t *)(void *)hcdc->data, + req->wLength); + + USBD_CtlSendData(pdev, (uint8_t *)(void *)hcdc->data, req->wLength); + } + else + { + hcdc->CmdOpCode = req->bRequest; + hcdc->CmdLength = (uint8_t)req->wLength; + + USBD_CtlPrepareRx(pdev, (uint8_t *)(void *)hcdc->data, req->wLength); + } + } + else + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t *)(void *)req, 0U); + } + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_STATUS: + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + USBD_CtlSendData(pdev, (uint8_t *)(void *)&status_info, 2U); + } + else + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + + case USB_REQ_GET_INTERFACE: + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + USBD_CtlSendData(pdev, &ifalt, 1U); + } + else + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + + case USB_REQ_SET_INTERFACE: + if (pdev->dev_state != USBD_STATE_CONFIGURED) + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + + default: + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + break; + } + break; + + default: + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + break; + } + + return ret; +} + +/** + * @brief USBD_CDC_DataIn + * Data sent on non-control IN endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassData; + PCD_HandleTypeDef *hpcd = pdev->pData; + + if (pdev->pClassData != NULL) + { + if ((pdev->ep_in[epnum].total_length > 0U) && ((pdev->ep_in[epnum].total_length % hpcd->IN_ep[epnum].maxpacket) == 0U)) + { + /* Update the packet total length */ + pdev->ep_in[epnum].total_length = 0U; + + /* Send ZLP */ + USBD_LL_Transmit(pdev, epnum, NULL, 0U); + } + else + { + hcdc->TxState = 0U; + } + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + + /* Get the received data length */ + hcdc->RxLength = USBD_LL_GetRxDataSize(pdev, epnum); + + /* USB data will be immediately processed, this allow next USB traffic being + NAKed till the end of the application Xfer */ + if (pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength); + + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + +/** + * @brief USBD_CDC_EP0_RxReady + * Handle EP0 Rx Ready event + * @param pdev: device instance + * @retval status + */ +static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + + if ((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFFU)) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode, + (uint8_t *)(void *)hcdc->data, + (uint16_t)hcdc->CmdLength); + hcdc->CmdOpCode = 0xFFU; + + } + return USBD_OK; +} + +/** + * @brief USBD_CDC_GetFSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length) +{ + *length = sizeof(USBD_CDC_CfgFSDesc); + return USBD_CDC_CfgFSDesc; +} + +/** + * @brief USBD_CDC_GetHSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length) +{ + *length = sizeof(USBD_CDC_CfgHSDesc); + return USBD_CDC_CfgHSDesc; +} + +/** + * @brief USBD_CDC_GetCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length) +{ + *length = sizeof(USBD_CDC_OtherSpeedCfgDesc); + return USBD_CDC_OtherSpeedCfgDesc; +} + +/** +* @brief DeviceQualifierDescriptor +* return Device Qualifier descriptor +* @param length : pointer data length +* @retval pointer to descriptor buffer +*/ +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length) +{ + *length = sizeof(USBD_CDC_DeviceQualifierDesc); + return USBD_CDC_DeviceQualifierDesc; +} + +/** +* @brief USBD_CDC_RegisterInterface + * @param pdev: device instance + * @param fops: CD Interface callback + * @retval status + */ +uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops) +{ + uint8_t ret = USBD_FAIL; + + if (fops != NULL) + { + pdev->pUserData = fops; + ret = USBD_OK; + } + + return ret; +} + +/** + * @brief USBD_CDC_SetTxBuffer + * @param pdev: device instance + * @param pbuff: Tx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + + hcdc->TxBuffer = pbuff; + hcdc->TxLength = length; + + return USBD_OK; +} + + +/** + * @brief USBD_CDC_SetRxBuffer + * @param pdev: device instance + * @param pbuff: Rx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + + hcdc->RxBuffer = pbuff; + + return USBD_OK; +} + +/** + * @brief USBD_CDC_TransmitPacket + * Transmit packet on IN endpoint + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + + if (pdev->pClassData != NULL) + { + if (hcdc->TxState == 0U) + { + /* Tx Transfer in progress */ + hcdc->TxState = 1U; + + /* Update the packet total length */ + pdev->ep_in[CDC_IN_EP & 0xFU].total_length = hcdc->TxLength; + + /* Transmit next packet */ + USBD_LL_Transmit(pdev, CDC_IN_EP, hcdc->TxBuffer, + (uint16_t)hcdc->TxLength); + + return USBD_OK; + } + else + { + return USBD_BUSY; + } + } + else + { + return USBD_FAIL; + } +} + + +/** + * @brief USBD_CDC_ReceivePacket + * prepare OUT Endpoint for reception + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData; + + /* Suspend or Resume USB Out process */ + if (pdev->pClassData != NULL) + { + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h new file mode 100644 index 0000000..030927b --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h @@ -0,0 +1,161 @@ +/** + ****************************************************************************** + * @file usbd_core.h + * @author MCD Application Team + * @brief Header file for usbd_core.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CORE_H +#define __USBD_CORE_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" +#include "usbd_def.h" +#include "usbd_ioreq.h" +#include "usbd_ctlreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CORE + * @brief This file is the Header file for usbd_core.c file + * @{ + */ + + +/** @defgroup USBD_CORE_Exported_Defines + * @{ + */ +#ifndef USBD_DEBUG_LEVEL +#define USBD_DEBUG_LEVEL 0U +#endif /* USBD_DEBUG_LEVEL */ +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ +#define USBD_SOF USBD_LL_SOF +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_FunctionsPrototype + * @{ + */ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id); +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass); + +USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); + +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup); +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata); +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata); + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed); +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); + +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev); + +/* USBD Low Level Driver */ +USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps); + +USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr); +USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +void USBD_LL_Delay(uint32_t Delay); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CORE_H */ + +/** + * @} + */ + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + + diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h new file mode 100644 index 0000000..25a4758 --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h @@ -0,0 +1,105 @@ +/** + ****************************************************************************** + * @file usbd_req.h + * @author MCD Application Team + * @brief Header file for the usbd_req.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_REQUEST_H +#define __USB_REQUEST_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_REQ + * @brief header file for the usbd_req.c file + * @{ + */ + +/** @defgroup USBD_REQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Exported_Types + * @{ + */ +/** + * @} + */ + + + +/** @defgroup USBD_REQ_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_Variables + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + + +void USBD_CtlError(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata); + +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_REQUEST_H */ + +/** + * @} + */ + +/** +* @} +*/ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h new file mode 100644 index 0000000..8d7502f --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h @@ -0,0 +1,348 @@ +/** + ****************************************************************************** + * @file usbd_def.h + * @author MCD Application Team + * @brief General defines for the usb device library + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DEF_H +#define __USBD_DEF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USB_DEF + * @brief general defines for the usb device library file + * @{ + */ + +/** @defgroup USB_DEF_Exported_Defines + * @{ + */ + +#ifndef NULL +#define NULL 0U +#endif /* NULL */ + +#ifndef USBD_MAX_NUM_INTERFACES +#define USBD_MAX_NUM_INTERFACES 1U +#endif /* USBD_MAX_NUM_CONFIGURATION */ + +#ifndef USBD_MAX_NUM_CONFIGURATION +#define USBD_MAX_NUM_CONFIGURATION 1U +#endif /* USBD_MAX_NUM_CONFIGURATION */ + +#ifndef USBD_LPM_ENABLED +#define USBD_LPM_ENABLED 0U +#endif /* USBD_LPM_ENABLED */ + +#ifndef USBD_SELF_POWERED +#define USBD_SELF_POWERED 1U +#endif /*USBD_SELF_POWERED */ + +#ifndef USBD_SUPPORT_USER_STRING_DESC +#define USBD_SUPPORT_USER_STRING_DESC 0U +#endif /* USBD_SUPPORT_USER_STRING_DESC */ + +#define USB_LEN_DEV_QUALIFIER_DESC 0x0AU +#define USB_LEN_DEV_DESC 0x12U +#define USB_LEN_CFG_DESC 0x09U +#define USB_LEN_IF_DESC 0x09U +#define USB_LEN_EP_DESC 0x07U +#define USB_LEN_OTG_DESC 0x03U +#define USB_LEN_LANGID_STR_DESC 0x04U +#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09U + +#define USBD_IDX_LANGID_STR 0x00U +#define USBD_IDX_MFC_STR 0x01U +#define USBD_IDX_PRODUCT_STR 0x02U +#define USBD_IDX_SERIAL_STR 0x03U +#define USBD_IDX_CONFIG_STR 0x04U +#define USBD_IDX_INTERFACE_STR 0x05U + +#define USB_REQ_TYPE_STANDARD 0x00U +#define USB_REQ_TYPE_CLASS 0x20U +#define USB_REQ_TYPE_VENDOR 0x40U +#define USB_REQ_TYPE_MASK 0x60U + +#define USB_REQ_RECIPIENT_DEVICE 0x00U +#define USB_REQ_RECIPIENT_INTERFACE 0x01U +#define USB_REQ_RECIPIENT_ENDPOINT 0x02U +#define USB_REQ_RECIPIENT_MASK 0x03U + +#define USB_REQ_GET_STATUS 0x00U +#define USB_REQ_CLEAR_FEATURE 0x01U +#define USB_REQ_SET_FEATURE 0x03U +#define USB_REQ_SET_ADDRESS 0x05U +#define USB_REQ_GET_DESCRIPTOR 0x06U +#define USB_REQ_SET_DESCRIPTOR 0x07U +#define USB_REQ_GET_CONFIGURATION 0x08U +#define USB_REQ_SET_CONFIGURATION 0x09U +#define USB_REQ_GET_INTERFACE 0x0AU +#define USB_REQ_SET_INTERFACE 0x0BU +#define USB_REQ_SYNCH_FRAME 0x0CU + +#define USB_DESC_TYPE_DEVICE 0x01U +#define USB_DESC_TYPE_CONFIGURATION 0x02U +#define USB_DESC_TYPE_STRING 0x03U +#define USB_DESC_TYPE_INTERFACE 0x04U +#define USB_DESC_TYPE_ENDPOINT 0x05U +#define USB_DESC_TYPE_DEVICE_QUALIFIER 0x06U +#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 0x07U +#define USB_DESC_TYPE_BOS 0x0FU + +#define USB_CONFIG_REMOTE_WAKEUP 0x02U +#define USB_CONFIG_SELF_POWERED 0x01U + +#define USB_FEATURE_EP_HALT 0x00U +#define USB_FEATURE_REMOTE_WAKEUP 0x01U +#define USB_FEATURE_TEST_MODE 0x02U + +#define USB_DEVICE_CAPABITY_TYPE 0x10U + +#define USB_HS_MAX_PACKET_SIZE 512U +#define USB_FS_MAX_PACKET_SIZE 64U +#define USB_MAX_EP0_SIZE 64U + +/* Device Status */ +#define USBD_STATE_DEFAULT 0x01U +#define USBD_STATE_ADDRESSED 0x02U +#define USBD_STATE_CONFIGURED 0x03U +#define USBD_STATE_SUSPENDED 0x04U + + +/* EP0 State */ +#define USBD_EP0_IDLE 0x00U +#define USBD_EP0_SETUP 0x01U +#define USBD_EP0_DATA_IN 0x02U +#define USBD_EP0_DATA_OUT 0x03U +#define USBD_EP0_STATUS_IN 0x04U +#define USBD_EP0_STATUS_OUT 0x05U +#define USBD_EP0_STALL 0x06U + +#define USBD_EP_TYPE_CTRL 0x00U +#define USBD_EP_TYPE_ISOC 0x01U +#define USBD_EP_TYPE_BULK 0x02U +#define USBD_EP_TYPE_INTR 0x03U + + +/** + * @} + */ + + +/** @defgroup USBD_DEF_Exported_TypesDefinitions + * @{ + */ + +typedef struct usb_setup_req +{ + uint8_t bmRequest; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} USBD_SetupReqTypedef; + +struct _USBD_HandleTypeDef; + +typedef struct _Device_cb +{ + uint8_t (*Init)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx); + uint8_t (*DeInit)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx); + /* Control Endpoints*/ + uint8_t (*Setup)(struct _USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + uint8_t (*EP0_TxSent)(struct _USBD_HandleTypeDef *pdev); + uint8_t (*EP0_RxReady)(struct _USBD_HandleTypeDef *pdev); + /* Class Specific Endpoints*/ + uint8_t (*DataIn)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + uint8_t (*DataOut)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + uint8_t (*SOF)(struct _USBD_HandleTypeDef *pdev); + uint8_t (*IsoINIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + uint8_t (*IsoOUTIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + + uint8_t *(*GetHSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetFSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length); + uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length); +#if (USBD_SUPPORT_USER_STRING_DESC == 1U) + uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t index, uint16_t *length); +#endif + +} USBD_ClassTypeDef; + +/* Following USB Device Speed */ +typedef enum +{ + USBD_SPEED_HIGH = 0U, + USBD_SPEED_FULL = 1U, + USBD_SPEED_LOW = 2U, +} USBD_SpeedTypeDef; + +/* Following USB Device status */ +typedef enum +{ + USBD_OK = 0U, + USBD_BUSY, + USBD_FAIL, +} USBD_StatusTypeDef; + +/* USB Device descriptors structure */ +typedef struct +{ + uint8_t *(*GetDeviceDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetLangIDStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetManufacturerStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetProductStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetSerialStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetConfigurationStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetInterfaceStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); +#if (USBD_LPM_ENABLED == 1U) + uint8_t *(*GetBOSDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); +#endif +} USBD_DescriptorsTypeDef; + +/* USB Device handle structure */ +typedef struct +{ + uint32_t status; + uint32_t is_used; + uint32_t total_length; + uint32_t rem_length; + uint32_t maxpacket; +} USBD_EndpointTypeDef; + +/* USB Device handle structure */ +typedef struct _USBD_HandleTypeDef +{ + uint8_t id; + uint32_t dev_config; + uint32_t dev_default_config; + uint32_t dev_config_status; + USBD_SpeedTypeDef dev_speed; + USBD_EndpointTypeDef ep_in[16]; + USBD_EndpointTypeDef ep_out[16]; + uint32_t ep0_state; + uint32_t ep0_data_len; + uint8_t dev_state; + uint8_t dev_old_state; + uint8_t dev_address; + uint8_t dev_connection_status; + uint8_t dev_test_mode; + uint32_t dev_remote_wakeup; + + USBD_SetupReqTypedef request; + USBD_DescriptorsTypeDef *pDesc; + USBD_ClassTypeDef *pClass; + void *pClassData; + void *pUserData; + void *pData; +} USBD_HandleTypeDef; + +/** + * @} + */ + + + +/** @defgroup USBD_DEF_Exported_Macros + * @{ + */ +#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \ + (((uint16_t)(*(((uint8_t *)(addr)) + 1U))) << 8U)) + +#define LOBYTE(x) ((uint8_t)((x) & 0x00FFU)) +#define HIBYTE(x) ((uint8_t)(((x) & 0xFF00U) >> 8U)) +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define MAX(a, b) (((a) > (b)) ? (a) : (b)) + + +#if defined ( __GNUC__ ) +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* In HS mode and when the DMA is used, all variables and data structures dealing + with the DMA during the transaction process should be 4-bytes aligned */ + +#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4U))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#if defined (__CC_ARM) /* ARM Compiler */ +#define __ALIGN_BEGIN __align(4U) +#elif defined (__ICCARM__) /* IAR Compiler */ +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_FunctionsPrototype + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DEF_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h new file mode 100644 index 0000000..8a6dd5f --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h @@ -0,0 +1,119 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.h + * @author MCD Application Team + * @brief Header file for the usbd_ioreq.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_IOREQ_H +#define __USBD_IOREQ_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" +#include "usbd_core.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_IOREQ + * @brief header file for the usbd_ioreq.c file + * @{ + */ + +/** @defgroup USBD_IOREQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Exported_Types + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_IOREQ_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev); + +uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_IOREQ_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c new file mode 100644 index 0000000..b1a60ae --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c @@ -0,0 +1,611 @@ +/** + ****************************************************************************** + * @file usbd_core.c + * @author MCD Application Team + * @brief This file provides all the USBD core functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY +* @{ +*/ + + +/** @defgroup USBD_CORE +* @brief usbd core module +* @{ +*/ + +/** @defgroup USBD_CORE_Private_TypesDefinitions +* @{ +*/ + +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Defines +* @{ +*/ + +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Macros +* @{ +*/ + +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_FunctionPrototypes +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup USBD_CORE_Private_Variables +* @{ +*/ + +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Functions +* @{ +*/ + +/** +* @brief USBD_Init +* Initializes the device stack and load the class driver +* @param pdev: device instance +* @param pdesc: Descriptor structure address +* @param id: Low level core index +* @retval None +*/ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, + USBD_DescriptorsTypeDef *pdesc, uint8_t id) +{ + /* Check whether the USB Host handle is valid */ + if (pdev == NULL) + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Invalid Device handle"); +#endif + return USBD_FAIL; + } + + /* Unlink previous class*/ + if (pdev->pClass != NULL) + { + pdev->pClass = NULL; + } + + /* Assign USBD Descriptors */ + if (pdesc != NULL) + { + pdev->pDesc = pdesc; + } + + /* Set Device initial State */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->id = id; + /* Initialize low level driver */ + USBD_LL_Init(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_DeInit +* Re-Initialize th device library +* @param pdev: device instance +* @retval status: status +*/ +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev) +{ + /* Set Default State */ + pdev->dev_state = USBD_STATE_DEFAULT; + + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + /* Initialize low level driver */ + USBD_LL_DeInit(pdev); + + return USBD_OK; +} + +/** + * @brief USBD_RegisterClass + * Link class driver to Device Core. + * @param pDevice : Device Handle + * @param pclass: Class handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass) +{ + USBD_StatusTypeDef status = USBD_OK; + if (pclass != NULL) + { + /* link the class to the USB Device handle */ + pdev->pClass = pclass; + status = USBD_OK; + } + else + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Invalid Class handle"); +#endif + status = USBD_FAIL; + } + + return status; +} + +/** + * @brief USBD_Start + * Start the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev) +{ + /* Start the low level driver */ + USBD_LL_Start(pdev); + + return USBD_OK; +} + +/** + * @brief USBD_Stop + * Stop the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_RunTestMode +* Launch test mode process +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev) +{ + /* Prevent unused argument compilation warning */ + UNUSED(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_SetClassConfig +* Configure device and start the interface +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status +*/ + +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + USBD_StatusTypeDef ret = USBD_FAIL; + + if (pdev->pClass != NULL) + { + /* Set configuration and Start the Class*/ + if (pdev->pClass->Init(pdev, cfgidx) == 0U) + { + ret = USBD_OK; + } + } + + return ret; +} + +/** +* @brief USBD_ClrClassConfig +* Clear current configuration +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status: USBD_StatusTypeDef +*/ +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + /* Clear configuration and De-initialize the Class process*/ + pdev->pClass->DeInit(pdev, cfgidx); + + return USBD_OK; +} + + +/** +* @brief USBD_SetupStage +* Handle the setup stage +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup) +{ + USBD_ParseSetupRequest(&pdev->request, psetup); + + pdev->ep0_state = USBD_EP0_SETUP; + + pdev->ep0_data_len = pdev->request.wLength; + + switch (pdev->request.bmRequest & 0x1FU) + { + case USB_REQ_RECIPIENT_DEVICE: + USBD_StdDevReq(pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_INTERFACE: + USBD_StdItfReq(pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_ENDPOINT: + USBD_StdEPReq(pdev, &pdev->request); + break; + + default: + USBD_LL_StallEP(pdev, (pdev->request.bmRequest & 0x80U)); + break; + } + + return USBD_OK; +} + +/** +* @brief USBD_DataOutStage +* Handle data OUT stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev, + uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if (epnum == 0U) + { + pep = &pdev->ep_out[0]; + + if (pdev->ep0_state == USBD_EP0_DATA_OUT) + { + if (pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueRx(pdev, pdata, + (uint16_t)MIN(pep->rem_length, pep->maxpacket)); + } + else + { + if ((pdev->pClass->EP0_RxReady != NULL) && + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_RxReady(pdev); + } + USBD_CtlSendStatus(pdev); + } + } + else + { + if (pdev->ep0_state == USBD_EP0_STATUS_OUT) + { + /* + * STATUS PHASE completed, update ep0_state to idle + */ + pdev->ep0_state = USBD_EP0_IDLE; + USBD_LL_StallEP(pdev, 0U); + } + } + } + else if ((pdev->pClass->DataOut != NULL) && + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataOut(pdev, epnum); + } + else + { + /* should never be in this condition */ + return USBD_FAIL; + } + + return USBD_OK; +} + +/** +* @brief USBD_DataInStage +* Handle data in stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, + uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if (epnum == 0U) + { + pep = &pdev->ep_in[0]; + + if (pdev->ep0_state == USBD_EP0_DATA_IN) + { + if (pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueSendData(pdev, pdata, (uint16_t)pep->rem_length); + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + } + else + { + /* last packet is MPS multiple, so send ZLP packet */ + if ((pep->total_length % pep->maxpacket == 0U) && + (pep->total_length >= pep->maxpacket) && + (pep->total_length < pdev->ep0_data_len)) + { + USBD_CtlContinueSendData(pdev, NULL, 0U); + pdev->ep0_data_len = 0U; + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + } + else + { + if ((pdev->pClass->EP0_TxSent != NULL) && + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_TxSent(pdev); + } + USBD_LL_StallEP(pdev, 0x80U); + USBD_CtlReceiveStatus(pdev); + } + } + } + else + { + if ((pdev->ep0_state == USBD_EP0_STATUS_IN) || + (pdev->ep0_state == USBD_EP0_IDLE)) + { + USBD_LL_StallEP(pdev, 0x80U); + } + } + + if (pdev->dev_test_mode == 1U) + { + USBD_RunTestMode(pdev); + pdev->dev_test_mode = 0U; + } + } + else if ((pdev->pClass->DataIn != NULL) && + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataIn(pdev, epnum); + } + else + { + /* should never be in this condition */ + return USBD_FAIL; + } + + return USBD_OK; +} + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev) +{ + /* Open EP0 OUT */ + USBD_LL_OpenEP(pdev, 0x00U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE); + pdev->ep_out[0x00U & 0xFU].is_used = 1U; + + pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE; + + /* Open EP0 IN */ + USBD_LL_OpenEP(pdev, 0x80U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE); + pdev->ep_in[0x80U & 0xFU].is_used = 1U; + + pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE; + + /* Upon Reset call user call back */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->ep0_state = USBD_EP0_IDLE; + pdev->dev_config = 0U; + pdev->dev_remote_wakeup = 0U; + + if (pdev->pClassData) + { + pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config); + } + + return USBD_OK; +} + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, + USBD_SpeedTypeDef speed) +{ + pdev->dev_speed = speed; + + return USBD_OK; +} + +/** +* @brief USBD_Suspend +* Handle Suspend event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev) +{ + pdev->dev_old_state = pdev->dev_state; + pdev->dev_state = USBD_STATE_SUSPENDED; + + return USBD_OK; +} + +/** +* @brief USBD_Resume +* Handle Resume event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev) +{ + if (pdev->dev_state == USBD_STATE_SUSPENDED) + { + pdev->dev_state = pdev->dev_old_state; + } + + return USBD_OK; +} + +/** +* @brief USBD_SOF +* Handle SOF event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev) +{ + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + if (pdev->pClass->SOF != NULL) + { + pdev->pClass->SOF(pdev); + } + } + + return USBD_OK; +} + +/** +* @brief USBD_IsoINIncomplete +* Handle iso in incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, + uint8_t epnum) +{ + /* Prevent unused arguments compilation warning */ + UNUSED(pdev); + UNUSED(epnum); + + return USBD_OK; +} + +/** +* @brief USBD_IsoOUTIncomplete +* Handle iso out incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, + uint8_t epnum) +{ + /* Prevent unused arguments compilation warning */ + UNUSED(pdev); + UNUSED(epnum); + + return USBD_OK; +} + +/** +* @brief USBD_DevConnected +* Handle device connection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev) +{ + /* Prevent unused argument compilation warning */ + UNUSED(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_DevDisconnected +* Handle device disconnection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config); + + return USBD_OK; +} +/** +* @} +*/ + + +/** +* @} +*/ + + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c new file mode 100644 index 0000000..e57c1bc --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c @@ -0,0 +1,918 @@ +/** + ****************************************************************************** + * @file usbd_req.c + * @author MCD Application Team + * @brief This file provides the standard USB requests following chapter 9. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ctlreq.h" +#include "usbd_ioreq.h" + + +/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_REQ + * @brief USB standard requests module + * @{ + */ + +/** @defgroup USBD_REQ_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_FunctionPrototypes + * @{ + */ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static void USBD_SetAddress(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static void USBD_SetConfig(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static void USBD_GetConfig(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static void USBD_GetStatus(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static void USBD_SetFeature(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static uint8_t USBD_GetLen(uint8_t *buf); + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Functions + * @{ + */ + + +/** +* @brief USBD_StdDevReq +* Handle standard usb device requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + pdev->pClass->Setup(pdev, req); + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_DESCRIPTOR: + USBD_GetDescriptor(pdev, req); + break; + + case USB_REQ_SET_ADDRESS: + USBD_SetAddress(pdev, req); + break; + + case USB_REQ_SET_CONFIGURATION: + USBD_SetConfig(pdev, req); + break; + + case USB_REQ_GET_CONFIGURATION: + USBD_GetConfig(pdev, req); + break; + + case USB_REQ_GET_STATUS: + USBD_GetStatus(pdev, req); + break; + + case USB_REQ_SET_FEATURE: + USBD_SetFeature(pdev, req); + break; + + case USB_REQ_CLEAR_FEATURE: + USBD_ClrFeature(pdev, req); + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + + return ret; +} + +/** +* @brief USBD_StdItfReq +* Handle standard usb interface requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + case USB_REQ_TYPE_STANDARD: + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + + if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) + { + ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req); + + if ((req->wLength == 0U) && (ret == USBD_OK)) + { + USBD_CtlSendStatus(pdev); + } + } + else + { + USBD_CtlError(pdev, req); + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + + return USBD_OK; +} + +/** +* @brief USBD_StdEPReq +* Handle standard usb endpoint requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_EndpointTypeDef *pep; + uint8_t ep_addr; + USBD_StatusTypeDef ret = USBD_OK; + ep_addr = LOBYTE(req->wIndex); + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + pdev->pClass->Setup(pdev, req); + break; + + case USB_REQ_TYPE_STANDARD: + /* Check if it is a class request */ + if ((req->bmRequest & 0x60U) == 0x20U) + { + ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req); + + return ret; + } + + switch (req->bRequest) + { + case USB_REQ_SET_FEATURE: + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + { + USBD_LL_StallEP(pdev, ep_addr); + USBD_LL_StallEP(pdev, 0x80U); + } + else + { + USBD_CtlError(pdev, req); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr != 0x00U) && + (ep_addr != 0x80U) && (req->wLength == 0x00U)) + { + USBD_LL_StallEP(pdev, ep_addr); + } + } + USBD_CtlSendStatus(pdev); + + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + case USB_REQ_CLEAR_FEATURE: + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + { + USBD_LL_StallEP(pdev, ep_addr); + USBD_LL_StallEP(pdev, 0x80U); + } + else + { + USBD_CtlError(pdev, req); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr & 0x7FU) != 0x00U) + { + USBD_LL_ClearStallEP(pdev, ep_addr); + } + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + case USB_REQ_GET_STATUS: + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + { + USBD_CtlError(pdev, req); + break; + } + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + &pdev->ep_out[ep_addr & 0x7FU]; + + pep->status = 0x0000U; + + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U); + break; + + case USBD_STATE_CONFIGURED: + if ((ep_addr & 0x80U) == 0x80U) + { + if (pdev->ep_in[ep_addr & 0xFU].is_used == 0U) + { + USBD_CtlError(pdev, req); + break; + } + } + else + { + if (pdev->ep_out[ep_addr & 0xFU].is_used == 0U) + { + USBD_CtlError(pdev, req); + break; + } + } + + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + &pdev->ep_out[ep_addr & 0x7FU]; + + if ((ep_addr == 0x00U) || (ep_addr == 0x80U)) + { + pep->status = 0x0000U; + } + else if (USBD_LL_IsStallEP(pdev, ep_addr)) + { + pep->status = 0x0001U; + } + else + { + pep->status = 0x0000U; + } + + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U); + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + + return ret; +} + + +/** +* @brief USBD_GetDescriptor +* Handle Get Descriptor requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + uint16_t len = 0U; + uint8_t *pbuf = NULL; + uint8_t err = 0U; + + switch (req->wValue >> 8) + { +#if (USBD_LPM_ENABLED == 1U) + case USB_DESC_TYPE_BOS: + if (pdev->pDesc->GetBOSDescriptor != NULL) + { + pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; +#endif + case USB_DESC_TYPE_DEVICE: + pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len); + break; + + case USB_DESC_TYPE_CONFIGURATION: + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + pbuf = pdev->pClass->GetHSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + else + { + pbuf = pdev->pClass->GetFSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + break; + + case USB_DESC_TYPE_STRING: + switch ((uint8_t)(req->wValue)) + { + case USBD_IDX_LANGID_STR: + if (pdev->pDesc->GetLangIDStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_MFC_STR: + if (pdev->pDesc->GetManufacturerStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_PRODUCT_STR: + if (pdev->pDesc->GetProductStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_SERIAL_STR: + if (pdev->pDesc->GetSerialStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_CONFIG_STR: + if (pdev->pDesc->GetConfigurationStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_INTERFACE_STR: + if (pdev->pDesc->GetInterfaceStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + default: +#if (USBD_SUPPORT_USER_STRING_DESC == 1U) + if (pdev->pClass->GetUsrStrDescriptor != NULL) + { + pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue), &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; +#else + USBD_CtlError(pdev, req); + err++; +#endif + } + break; + + case USB_DESC_TYPE_DEVICE_QUALIFIER: + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + pbuf = pdev->pClass->GetDeviceQualifierDescriptor(&len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION: + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + pbuf = pdev->pClass->GetOtherSpeedConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION; + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + default: + USBD_CtlError(pdev, req); + err++; + break; + } + + if (err != 0U) + { + return; + } + else + { + if ((len != 0U) && (req->wLength != 0U)) + { + len = MIN(len, req->wLength); + (void)USBD_CtlSendData(pdev, pbuf, len); + } + + if (req->wLength == 0U) + { + (void)USBD_CtlSendStatus(pdev); + } + } +} + +/** +* @brief USBD_SetAddress +* Set device address +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetAddress(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + uint8_t dev_addr; + + if ((req->wIndex == 0U) && (req->wLength == 0U) && (req->wValue < 128U)) + { + dev_addr = (uint8_t)(req->wValue) & 0x7FU; + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + USBD_CtlError(pdev, req); + } + else + { + pdev->dev_address = dev_addr; + USBD_LL_SetUSBAddress(pdev, dev_addr); + USBD_CtlSendStatus(pdev); + + if (dev_addr != 0U) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + } + else + { + pdev->dev_state = USBD_STATE_DEFAULT; + } + } + } + else + { + USBD_CtlError(pdev, req); + } +} + +/** +* @brief USBD_SetConfig +* Handle Set device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + + if (cfgidx > USBD_MAX_NUM_CONFIGURATION) + { + USBD_CtlError(pdev, req); + } + else + { + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if (cfgidx) + { + pdev->dev_config = cfgidx; + pdev->dev_state = USBD_STATE_CONFIGURED; + if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev, req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + case USBD_STATE_CONFIGURED: + if (cfgidx == 0U) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + pdev->dev_config = cfgidx; + USBD_ClrClassConfig(pdev, cfgidx); + USBD_CtlSendStatus(pdev); + } + else if (cfgidx != pdev->dev_config) + { + /* Clear old configuration */ + USBD_ClrClassConfig(pdev, (uint8_t)pdev->dev_config); + + /* set new configuration */ + pdev->dev_config = cfgidx; + if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev, req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev, req); + USBD_ClrClassConfig(pdev, cfgidx); + break; + } + } +} + +/** +* @brief USBD_GetConfig +* Handle Get device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + if (req->wLength != 1U) + { + USBD_CtlError(pdev, req); + } + else + { + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + pdev->dev_default_config = 0U; + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_default_config, 1U); + break; + + case USBD_STATE_CONFIGURED: + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config, 1U); + break; + + default: + USBD_CtlError(pdev, req); + break; + } + } +} + +/** +* @brief USBD_GetStatus +* Handle Get Status request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetStatus(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wLength != 0x2U) + { + USBD_CtlError(pdev, req); + break; + } + +#if (USBD_SELF_POWERED == 1U) + pdev->dev_config_status = USB_CONFIG_SELF_POWERED; +#else + pdev->dev_config_status = 0U; +#endif + + if (pdev->dev_remote_wakeup) + { + pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP; + } + + USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config_status, 2U); + break; + + default: + USBD_CtlError(pdev, req); + break; + } +} + + +/** +* @brief USBD_SetFeature +* Handle Set device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetFeature(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 1U; + USBD_CtlSendStatus(pdev); + } +} + + +/** +* @brief USBD_ClrFeature +* Handle clear device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 0U; + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } +} + +/** +* @brief USBD_ParseSetupRequest +* Copy buffer into setup structure +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata) +{ + req->bmRequest = *(uint8_t *)(pdata); + req->bRequest = *(uint8_t *)(pdata + 1U); + req->wValue = SWAPBYTE(pdata + 2U); + req->wIndex = SWAPBYTE(pdata + 4U); + req->wLength = SWAPBYTE(pdata + 6U); + +} + +/** +* @brief USBD_CtlError +* Handle USB low level Error +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_CtlError(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_LL_StallEP(pdev, 0x80U); + USBD_LL_StallEP(pdev, 0U); +} + + +/** + * @brief USBD_GetString + * Convert Ascii string into unicode one + * @param desc : descriptor buffer + * @param unicode : Formatted string buffer (unicode) + * @param len : descriptor length + * @retval None + */ +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len) +{ + uint8_t idx = 0U; + + if (desc != NULL) + { + *len = (uint16_t)USBD_GetLen(desc) * 2U + 2U; + unicode[idx++] = *(uint8_t *)(void *)len; + unicode[idx++] = USB_DESC_TYPE_STRING; + + while (*desc != '\0') + { + unicode[idx++] = *desc++; + unicode[idx++] = 0U; + } + } +} + +/** + * @brief USBD_GetLen + * return the string length + * @param buf : pointer to the ascii string buffer + * @retval string length + */ +static uint8_t USBD_GetLen(uint8_t *buf) +{ + uint8_t len = 0U; + + while (*buf != '\0') + { + len++; + buf++; + } + + return len; +} +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c new file mode 100644 index 0000000..3351972 --- /dev/null +++ b/Maple/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c @@ -0,0 +1,216 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.c + * @author MCD Application Team + * @brief This file provides the IO requests APIs for control endpoints. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2015 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_IOREQ + * @brief control I/O requests module + * @{ + */ + +/** @defgroup USBD_IOREQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Functions + * @{ + */ + +/** +* @brief USBD_CtlSendData +* send data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_IN; + pdev->ep_in[0].total_length = len; + pdev->ep_in[0].rem_length = len; + + /* Start the transfer */ + USBD_LL_Transmit(pdev, 0x00U, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueSendData +* continue sending data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + /* Start the next transfer */ + USBD_LL_Transmit(pdev, 0x00U, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlPrepareRx +* receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_OUT; + pdev->ep_out[0].total_length = len; + pdev->ep_out[0].rem_length = len; + + /* Start the transfer */ + USBD_LL_PrepareReceive(pdev, 0U, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueRx +* continue receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint16_t len) +{ + USBD_LL_PrepareReceive(pdev, 0U, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlSendStatus +* send zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_IN; + + /* Start the transfer */ + USBD_LL_Transmit(pdev, 0x00U, NULL, 0U); + + return USBD_OK; +} + +/** +* @brief USBD_CtlReceiveStatus +* receive zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_OUT; + + /* Start the transfer */ + USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + + return USBD_OK; +} + +/** +* @brief USBD_GetRxCount +* returns the received data length +* @param pdev: device instance +* @param ep_addr: endpoint address +* @retval Rx Data blength +*/ +uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return USBD_LL_GetRxDataSize(pdev, ep_addr); +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/STM32F103CBUX_FLASH.ld b/Maple/STM32F103CBUX_FLASH.ld new file mode 100644 index 0000000..375598b --- /dev/null +++ b/Maple/STM32F103CBUX_FLASH.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F103CBUx Device from STM32F1 series + * 128Kbytes FLASH + * 20Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/Maple/USB_DEVICE/App/usb_device.c b/Maple/USB_DEVICE/App/usb_device.c new file mode 100644 index 0000000..7a31401 --- /dev/null +++ b/Maple/USB_DEVICE/App/usb_device.c @@ -0,0 +1,102 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : usb_device.c + * @version : v2.0_Cube + * @brief : This file implements the USB Device + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ + +#include "usb_device.h" +#include "usbd_core.h" +#include "usbd_desc.h" +#include "usbd_cdc.h" +#include "usbd_cdc_if.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* USER CODE BEGIN PV */ +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE END PV */ + +/* USER CODE BEGIN PFP */ +/* Private function prototypes -----------------------------------------------*/ + +/* USER CODE END PFP */ + +/* USB Device Core handle declaration. */ +USBD_HandleTypeDef hUsbDeviceFS; + +/* + * -- Insert your variables declaration here -- + */ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* + * -- Insert your external function declaration here -- + */ +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/** + * Init USB device Library, add supported class and start the library + * @retval None + */ +void MX_USB_DEVICE_Init(void) +{ + /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */ + + /* USER CODE END USB_DEVICE_Init_PreTreatment */ + + /* Init Device Library, add supported class and start the library. */ + if (USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS) != USBD_OK) + { + Error_Handler(); + } + if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC) != USBD_OK) + { + Error_Handler(); + } + if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK) + { + Error_Handler(); + } + if (USBD_Start(&hUsbDeviceFS) != USBD_OK) + { + Error_Handler(); + } + + /* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */ + + /* USER CODE END USB_DEVICE_Init_PostTreatment */ +} + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/USB_DEVICE/App/usb_device.h b/Maple/USB_DEVICE/App/usb_device.h new file mode 100644 index 0000000..d15903d --- /dev/null +++ b/Maple/USB_DEVICE/App/usb_device.h @@ -0,0 +1,105 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : usb_device.h + * @version : v2.0_Cube + * @brief : Header for usb_device.c file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_DEVICE__H__ +#define __USB_DEVICE__H__ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" +#include "stm32f1xx_hal.h" +#include "usbd_def.h" + +/* USER CODE BEGIN INCLUDE */ + +/* USER CODE END INCLUDE */ + +/** @addtogroup USBD_OTG_DRIVER + * @{ + */ + +/** @defgroup USBD_DEVICE USBD_DEVICE + * @brief Device file for Usb otg low level driver. + * @{ + */ + +/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables + * @brief Public variables. + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* + * -- Insert your variables declaration here -- + */ +/* USER CODE BEGIN VARIABLES */ + +/* USER CODE END VARIABLES */ +/** + * @} + */ + +/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype + * @brief Declaration of public functions for Usb device. + * @{ + */ + +/** USB Device initialization function. */ +void MX_USB_DEVICE_Init(void); + +/* + * -- Insert functions declaration here -- + */ +/* USER CODE BEGIN FD */ + +/* USER CODE END FD */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_DEVICE__H__ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/USB_DEVICE/App/usbd_cdc_if.c b/Maple/USB_DEVICE/App/usbd_cdc_if.c new file mode 100644 index 0000000..a360145 --- /dev/null +++ b/Maple/USB_DEVICE/App/usbd_cdc_if.c @@ -0,0 +1,306 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : usbd_cdc_if.c + * @version : v2.0_Cube + * @brief : Usb device for Virtual Com Port. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc_if.h" + +/* USER CODE BEGIN INCLUDE */ + +/* USER CODE END INCLUDE */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE END PV */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @brief Usb device library. + * @{ + */ + +/** @addtogroup USBD_CDC_IF + * @{ + */ + +/** @defgroup USBD_CDC_IF_Private_TypesDefinitions USBD_CDC_IF_Private_TypesDefinitions + * @brief Private types. + * @{ + */ + +/* USER CODE BEGIN PRIVATE_TYPES */ + +/* USER CODE END PRIVATE_TYPES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Private_Defines USBD_CDC_IF_Private_Defines + * @brief Private defines. + * @{ + */ + +/* USER CODE BEGIN PRIVATE_DEFINES */ +/* USER CODE END PRIVATE_DEFINES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Private_Macros USBD_CDC_IF_Private_Macros + * @brief Private macros. + * @{ + */ + +/* USER CODE BEGIN PRIVATE_MACRO */ + +/* USER CODE END PRIVATE_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Private_Variables USBD_CDC_IF_Private_Variables + * @brief Private variables. + * @{ + */ +/* Create buffer for reception and transmission */ +/* It's up to user to redefine and/or remove those define */ +/** Received data over USB are stored in this buffer */ +uint8_t UserRxBufferFS[APP_RX_DATA_SIZE]; + +/** Data to send over USB CDC are stored in this buffer */ +uint8_t UserTxBufferFS[APP_TX_DATA_SIZE]; + +/* USER CODE BEGIN PRIVATE_VARIABLES */ + +/* USER CODE END PRIVATE_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables + * @brief Public variables. + * @{ + */ + +extern USBD_HandleTypeDef hUsbDeviceFS; + +/* USER CODE BEGIN EXPORTED_VARIABLES */ + +/* USER CODE END EXPORTED_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Private_FunctionPrototypes USBD_CDC_IF_Private_FunctionPrototypes + * @brief Private functions declaration. + * @{ + */ + +static int8_t CDC_Init_FS(void); +static int8_t CDC_DeInit_FS(void); +static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length); +static int8_t CDC_Receive_FS(uint8_t* pbuf, uint32_t *Len); + +/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */ + +/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */ + +/** + * @} + */ + +USBD_CDC_ItfTypeDef USBD_Interface_fops_FS = +{ + CDC_Init_FS, + CDC_DeInit_FS, + CDC_Control_FS, + CDC_Receive_FS +}; + +/* Private functions ---------------------------------------------------------*/ +/** + * @brief Initializes the CDC media low layer over the FS USB IP + * @retval USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Init_FS(void) +{ + /* USER CODE BEGIN 3 */ + /* Set Application Buffers */ + USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0); + USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS); + return (USBD_OK); + /* USER CODE END 3 */ +} + +/** + * @brief DeInitializes the CDC media low layer + * @retval USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_DeInit_FS(void) +{ + /* USER CODE BEGIN 4 */ + return (USBD_OK); + /* USER CODE END 4 */ +} + +/** + * @brief Manage the CDC class requests + * @param cmd: Command code + * @param pbuf: Buffer containing command data (request parameters) + * @param length: Number of data to be sent (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length) +{ + /* USER CODE BEGIN 5 */ + switch(cmd) + { + case CDC_SEND_ENCAPSULATED_COMMAND: + + break; + + case CDC_GET_ENCAPSULATED_RESPONSE: + + break; + + case CDC_SET_COMM_FEATURE: + + break; + + case CDC_GET_COMM_FEATURE: + + break; + + case CDC_CLEAR_COMM_FEATURE: + + break; + + /*******************************************************************************/ + /* Line Coding Structure */ + /*-----------------------------------------------------------------------------*/ + /* Offset | Field | Size | Value | Description */ + /* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/ + /* 4 | bCharFormat | 1 | Number | Stop bits */ + /* 0 - 1 Stop bit */ + /* 1 - 1.5 Stop bits */ + /* 2 - 2 Stop bits */ + /* 5 | bParityType | 1 | Number | Parity */ + /* 0 - None */ + /* 1 - Odd */ + /* 2 - Even */ + /* 3 - Mark */ + /* 4 - Space */ + /* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */ + /*******************************************************************************/ + case CDC_SET_LINE_CODING: + + break; + + case CDC_GET_LINE_CODING: + + break; + + case CDC_SET_CONTROL_LINE_STATE: + + break; + + case CDC_SEND_BREAK: + + break; + + default: + break; + } + + return (USBD_OK); + /* USER CODE END 5 */ +} + +/** + * @brief Data received over USB OUT endpoint are sent over CDC interface + * through this function. + * + * @note + * This function will issue a NAK packet on any OUT packet received on + * USB endpoint until exiting this function. If you exit this function + * before transfer is complete on CDC interface (ie. using DMA controller) + * it will result in receiving more data while previous ones are still + * not sent. + * + * @param Buf: Buffer of data to be received + * @param Len: Number of data received (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len) +{ + /* USER CODE BEGIN 6 */ + USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]); + USBD_CDC_ReceivePacket(&hUsbDeviceFS); + return (USBD_OK); + /* USER CODE END 6 */ +} + +/** + * @brief CDC_Transmit_FS + * Data to send over USB IN endpoint are sent over CDC interface + * through this function. + * @note + * + * + * @param Buf: Buffer of data to be sent + * @param Len: Number of data to be sent (in bytes) + * @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY + */ +uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len) +{ + uint8_t result = USBD_OK; + /* USER CODE BEGIN 7 */ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData; + if (hcdc->TxState != 0){ + return USBD_BUSY; + } + USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len); + result = USBD_CDC_TransmitPacket(&hUsbDeviceFS); + /* USER CODE END 7 */ + return result; +} + +/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */ + +/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/USB_DEVICE/App/usbd_cdc_if.h b/Maple/USB_DEVICE/App/usbd_cdc_if.h new file mode 100644 index 0000000..e820d82 --- /dev/null +++ b/Maple/USB_DEVICE/App/usbd_cdc_if.h @@ -0,0 +1,134 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : usbd_cdc_if.h + * @version : v2.0_Cube + * @brief : Header for usbd_cdc_if.c file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CDC_IF_H__ +#define __USBD_CDC_IF_H__ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" + +/* USER CODE BEGIN INCLUDE */ + +/* USER CODE END INCLUDE */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @brief For Usb device. + * @{ + */ + +/** @defgroup USBD_CDC_IF USBD_CDC_IF + * @brief Usb VCP device module + * @{ + */ + +/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines + * @brief Defines. + * @{ + */ +/* USER CODE BEGIN EXPORTED_DEFINES */ +/* Define size for the receive and transmit buffer over CDC */ +/* It's up to user to redefine and/or remove those define */ +#define APP_RX_DATA_SIZE 1000 +#define APP_TX_DATA_SIZE 1000 + +/* USER CODE END EXPORTED_DEFINES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types + * @brief Types. + * @{ + */ + +/* USER CODE BEGIN EXPORTED_TYPES */ + +/* USER CODE END EXPORTED_TYPES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros + * @brief Aliases. + * @{ + */ + +/* USER CODE BEGIN EXPORTED_MACRO */ + +/* USER CODE END EXPORTED_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables + * @brief Public variables. + * @{ + */ + +/** CDC Interface callback. */ +extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS; + +/* USER CODE BEGIN EXPORTED_VARIABLES */ + +/* USER CODE END EXPORTED_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype + * @brief Public functions declaration. + * @{ + */ + +uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len); + +/* USER CODE BEGIN EXPORTED_FUNCTIONS */ + +/* USER CODE END EXPORTED_FUNCTIONS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CDC_IF_H__ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/USB_DEVICE/App/usbd_desc.c b/Maple/USB_DEVICE/App/usbd_desc.c new file mode 100644 index 0000000..1ec86f7 --- /dev/null +++ b/Maple/USB_DEVICE/App/usbd_desc.c @@ -0,0 +1,394 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : App/usbd_desc.c + * @version : v2.0_Cube + * @brief : This file implements the USB device descriptors. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" +#include "usbd_desc.h" +#include "usbd_conf.h" + +/* USER CODE BEGIN INCLUDE */ + +/* USER CODE END INCLUDE */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE END PV */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @addtogroup USBD_DESC + * @{ + */ + +/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions + * @brief Private types. + * @{ + */ + +/* USER CODE BEGIN PRIVATE_TYPES */ + +/* USER CODE END PRIVATE_TYPES */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines + * @brief Private defines. + * @{ + */ + +#define USBD_VID 0x483 +#define USBD_LANGID_STRING 1031 +#define USBD_MANUFACTURER_STRING "STMicroelectronics" +#define USBD_PID_FS 0x5740 +#define USBD_PRODUCT_STRING_FS "STM32 Virtual ComPort" +#define USBD_CONFIGURATION_STRING_FS "CDC Config" +#define USBD_INTERFACE_STRING_FS "CDC Interface" + +/* USER CODE BEGIN PRIVATE_DEFINES */ + +/* USER CODE END PRIVATE_DEFINES */ + +/** + * @} + */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros + * @brief Private macros. + * @{ + */ + +/* USER CODE BEGIN PRIVATE_MACRO */ + +/* USER CODE END PRIVATE_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes + * @brief Private functions declaration. + * @{ + */ + +static void Get_SerialNum(void); +static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len); + +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes + * @brief Private functions declaration for FS. + * @{ + */ + +uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); +uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); + +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables + * @brief Private variables. + * @{ + */ + +USBD_DescriptorsTypeDef FS_Desc = +{ + USBD_FS_DeviceDescriptor +, USBD_FS_LangIDStrDescriptor +, USBD_FS_ManufacturerStrDescriptor +, USBD_FS_ProductStrDescriptor +, USBD_FS_SerialStrDescriptor +, USBD_FS_ConfigStrDescriptor +, USBD_FS_InterfaceStrDescriptor +}; + +#if defined ( __ICCARM__ ) /* IAR Compiler */ + #pragma data_alignment=4 +#endif /* defined ( __ICCARM__ ) */ +/** USB standard device descriptor. */ +__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END = +{ + 0x12, /*bLength */ + USB_DESC_TYPE_DEVICE, /*bDescriptorType*/ + 0x00, /*bcdUSB */ + 0x02, + 0x02, /*bDeviceClass*/ + 0x02, /*bDeviceSubClass*/ + 0x00, /*bDeviceProtocol*/ + USB_MAX_EP0_SIZE, /*bMaxPacketSize*/ + LOBYTE(USBD_VID), /*idVendor*/ + HIBYTE(USBD_VID), /*idVendor*/ + LOBYTE(USBD_PID_FS), /*idProduct*/ + HIBYTE(USBD_PID_FS), /*idProduct*/ + 0x00, /*bcdDevice rel. 2.00*/ + 0x02, + USBD_IDX_MFC_STR, /*Index of manufacturer string*/ + USBD_IDX_PRODUCT_STR, /*Index of product string*/ + USBD_IDX_SERIAL_STR, /*Index of serial number string*/ + USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/ +}; + +/* USB_DeviceDescriptor */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables + * @brief Private variables. + * @{ + */ + +#if defined ( __ICCARM__ ) /* IAR Compiler */ + #pragma data_alignment=4 +#endif /* defined ( __ICCARM__ ) */ + +/** USB lang indentifier descriptor. */ +__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END = +{ + USB_LEN_LANGID_STR_DESC, + USB_DESC_TYPE_STRING, + LOBYTE(USBD_LANGID_STRING), + HIBYTE(USBD_LANGID_STRING) +}; + +#if defined ( __ICCARM__ ) /* IAR Compiler */ + #pragma data_alignment=4 +#endif /* defined ( __ICCARM__ ) */ +/* Internal string descriptor. */ +__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END; + +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ + #pragma data_alignment=4 +#endif +__ALIGN_BEGIN uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] __ALIGN_END = { + USB_SIZ_STRING_SERIAL, + USB_DESC_TYPE_STRING, +}; + +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions + * @brief Private functions. + * @{ + */ + +/** + * @brief Return the device descriptor + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + UNUSED(speed); + *length = sizeof(USBD_FS_DeviceDesc); + return USBD_FS_DeviceDesc; +} + +/** + * @brief Return the LangID string descriptor + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + UNUSED(speed); + *length = sizeof(USBD_LangIDDesc); + return USBD_LangIDDesc; +} + +/** + * @brief Return the product string descriptor + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + if(speed == 0) + { + USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** + * @brief Return the manufacturer string descriptor + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + UNUSED(speed); + USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length); + return USBD_StrDesc; +} + +/** + * @brief Return the serial number string descriptor + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + UNUSED(speed); + *length = USB_SIZ_STRING_SERIAL; + + /* Update the serial number string descriptor with the data from the unique + * ID */ + Get_SerialNum(); + /* USER CODE BEGIN USBD_FS_SerialStrDescriptor */ + + /* USER CODE END USBD_FS_SerialStrDescriptor */ + return (uint8_t *) USBD_StringSerial; +} + +/** + * @brief Return the configuration string descriptor + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + if(speed == USBD_SPEED_HIGH) + { + USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** + * @brief Return the interface string descriptor + * @param speed : Current device speed + * @param length : Pointer to data length variable + * @retval Pointer to descriptor buffer + */ +uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) +{ + if(speed == 0) + { + USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** + * @brief Create the serial number string descriptor + * @param None + * @retval None + */ +static void Get_SerialNum(void) +{ + uint32_t deviceserial0, deviceserial1, deviceserial2; + + deviceserial0 = *(uint32_t *) DEVICE_ID1; + deviceserial1 = *(uint32_t *) DEVICE_ID2; + deviceserial2 = *(uint32_t *) DEVICE_ID3; + + deviceserial0 += deviceserial2; + + if (deviceserial0 != 0) + { + IntToUnicode(deviceserial0, &USBD_StringSerial[2], 8); + IntToUnicode(deviceserial1, &USBD_StringSerial[18], 4); + } +} + +/** + * @brief Convert Hex 32Bits value into char + * @param value: value to convert + * @param pbuf: pointer to the buffer + * @param len: buffer length + * @retval None + */ +static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len) +{ + uint8_t idx = 0; + + for (idx = 0; idx < len; idx++) + { + if (((value >> 28)) < 0xA) + { + pbuf[2 * idx] = (value >> 28) + '0'; + } + else + { + pbuf[2 * idx] = (value >> 28) + 'A' - 10; + } + + value = value << 4; + + pbuf[2 * idx + 1] = 0; + } +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/USB_DEVICE/App/usbd_desc.h b/Maple/USB_DEVICE/App/usbd_desc.h new file mode 100644 index 0000000..0ce33b5 --- /dev/null +++ b/Maple/USB_DEVICE/App/usbd_desc.h @@ -0,0 +1,145 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : usbd_desc.c + * @version : v2.0_Cube + * @brief : Header for usbd_conf.c file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DESC__C__ +#define __USBD_DESC__C__ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + +/* USER CODE BEGIN INCLUDE */ + +/* USER CODE END INCLUDE */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_DESC USBD_DESC + * @brief Usb device descriptors module. + * @{ + */ + +/** @defgroup USBD_DESC_Exported_Constants USBD_DESC_Exported_Constants + * @brief Constants. + * @{ + */ +#define DEVICE_ID1 (UID_BASE) +#define DEVICE_ID2 (UID_BASE + 0x4) +#define DEVICE_ID3 (UID_BASE + 0x8) + +#define USB_SIZ_STRING_SERIAL 0x1A + +/* USER CODE BEGIN EXPORTED_CONSTANTS */ + +/* USER CODE END EXPORTED_CONSTANTS */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines + * @brief Defines. + * @{ + */ + +/* USER CODE BEGIN EXPORTED_DEFINES */ + +/* USER CODE END EXPORTED_DEFINES */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions + * @brief Types. + * @{ + */ + +/* USER CODE BEGIN EXPORTED_TYPES */ + +/* USER CODE END EXPORTED_TYPES */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros + * @brief Aliases. + * @{ + */ + +/* USER CODE BEGIN EXPORTED_MACRO */ + +/* USER CODE END EXPORTED_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables + * @brief Public variables. + * @{ + */ + +/** Descriptor for the Usb device. */ +extern USBD_DescriptorsTypeDef FS_Desc; + +/* USER CODE BEGIN EXPORTED_VARIABLES */ + +/* USER CODE END EXPORTED_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype + * @brief Public functions declaration. + * @{ + */ + +/* USER CODE BEGIN EXPORTED_FUNCTIONS */ + +/* USER CODE END EXPORTED_FUNCTIONS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DESC__C__ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/USB_DEVICE/Target/usbd_conf.c b/Maple/USB_DEVICE/Target/usbd_conf.c new file mode 100644 index 0000000..b9f5967 --- /dev/null +++ b/Maple/USB_DEVICE/Target/usbd_conf.c @@ -0,0 +1,667 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : Target/usbd_conf.c + * @version : v2.0_Cube + * @brief : This file implements the board support package for the USB device library + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" +#include "stm32f1xx_hal.h" +#include "usbd_def.h" +#include "usbd_core.h" +#include "usbd_cdc.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE END PV */ + +PCD_HandleTypeDef hpcd_USB_FS; +void Error_Handler(void); + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* USER CODE BEGIN PFP */ +/* Private function prototypes -----------------------------------------------*/ + +/* USER CODE END PFP */ + +/* Private functions ---------------------------------------------------------*/ +static USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status); +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); +#else +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/******************************************************************************* + LL Driver Callbacks (PCD -> USB Device Library) +*******************************************************************************/ +/* MSP Init */ + +void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspInit 0 */ + + /* USER CODE END USB_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USB_CLK_ENABLE(); + + /* Peripheral interrupt init */ + HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn); + HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn); + /* USER CODE BEGIN USB_MspInit 1 */ + + /* USER CODE END USB_MspInit 1 */ + } +} + +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspDeInit 0 */ + + /* USER CODE END USB_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_CLK_DISABLE(); + + /* Peripheral interrupt Deinit*/ + HAL_NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn); + + HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); + + /* USER CODE BEGIN USB_MspDeInit 1 */ + + /* USER CODE END USB_MspDeInit 1 */ + } +} + +/** + * @brief Setup stage callback + * @param hpcd: PCD handle + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); +} + +/** + * @brief Data Out stage callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint number + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#else +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); +} + +/** + * @brief Data In stage callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint number + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#else +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Reset callback. + * @param hpcd: PCD handle + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_SpeedTypeDef speed = USBD_SPEED_FULL; + + if ( hpcd->Init.speed != PCD_SPEED_FULL) + { + Error_Handler(); + } + /* Set Speed. */ + USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed); + + /* Reset Device. */ + USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Suspend callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + /* Inform USB library that core enters in suspend Mode. */ + USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData); + /* Enter in STOP mode. */ + /* USER CODE BEGIN 2 */ + if (hpcd->Init.low_power_enable) + { + /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */ + SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk)); + } + /* USER CODE END 2 */ +} + +/** + * @brief Resume callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + /* USER CODE BEGIN 3 */ + + /* USER CODE END 3 */ + USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief ISOOUTIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint number + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#else +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief ISOINIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint number + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#else +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief Connect callback. + * @param hpcd: PCD handle + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Disconnect callback. + * @param hpcd: PCD handle + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +#else +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/******************************************************************************* + LL Driver Interface (USB Device Library --> PCD) +*******************************************************************************/ + +/** + * @brief Initializes the low level portion of the device driver. + * @param pdev: Device handle + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev) +{ + /* Init USB Ip. */ + /* Link the driver to the stack. */ + hpcd_USB_FS.pData = pdev; + pdev->pData = &hpcd_USB_FS; + + hpcd_USB_FS.Instance = USB; + hpcd_USB_FS.Init.dev_endpoints = 8; + hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; + hpcd_USB_FS.Init.low_power_enable = DISABLE; + hpcd_USB_FS.Init.lpm_enable = DISABLE; + hpcd_USB_FS.Init.battery_charging_enable = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) + { + Error_Handler( ); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + /* Register USB PCD CallBacks */ + HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SOF_CB_ID, PCD_SOFCallback); + HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SETUPSTAGE_CB_ID, PCD_SetupStageCallback); + HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESET_CB_ID, PCD_ResetCallback); + HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SUSPEND_CB_ID, PCD_SuspendCallback); + HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESUME_CB_ID, PCD_ResumeCallback); + HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_CONNECT_CB_ID, PCD_ConnectCallback); + HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_DISCONNECT_CB_ID, PCD_DisconnectCallback); + + HAL_PCD_RegisterDataOutStageCallback(&hpcd_USB_FS, PCD_DataOutStageCallback); + HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_FS, PCD_DataInStageCallback); + HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_FS, PCD_ISOOUTIncompleteCallback); + HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_FS, PCD_ISOINIncompleteCallback); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + /* USER CODE BEGIN EndPoint_Configuration */ + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); + /* USER CODE END EndPoint_Configuration */ + /* USER CODE BEGIN EndPoint_Configuration_CDC */ + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100); + /* USER CODE END EndPoint_Configuration_CDC */ + return USBD_OK; +} + +/** + * @brief De-Initializes the low level portion of the device driver. + * @param pdev: Device handle + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_DeInit(pdev->pData); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Starts the low level portion of the device driver. + * @param pdev: Device handle + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_Start(pdev->pData); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Stops the low level portion of the device driver. + * @param pdev: Device handle + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_Stop(pdev->pData); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Opens an endpoint of the low level driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @param ep_type: Endpoint type + * @param ep_mps: Endpoint max packet size + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Closes an endpoint of the low level driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Flushes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Sets a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Clears a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Returns Stall condition. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval Stall (1: Yes, 0: No) + */ +uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData; + + if((ep_addr & 0x80) == 0x80) + { + return hpcd->IN_ep[ep_addr & 0x7F].is_stall; + } + else + { + return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; + } +} + +/** + * @brief Assigns a USB address to the device. + * @param pdev: Device handle + * @param dev_addr: Device address + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Transmits data over an endpoint. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @param pbuf: Pointer to data to be sent + * @param size: Data size + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Prepares an endpoint for reception. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @param pbuf: Pointer to data to be received + * @param size: Data size + * @retval USBD status + */ +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size); + + usb_status = USBD_Get_USB_Status(hal_status); + + return usb_status; +} + +/** + * @brief Returns the last transfered packet size. + * @param pdev: Device handle + * @param ep_addr: Endpoint number + * @retval Recived Data Size + */ +uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr); +} + +/** + * @brief Delays routine for the USB device library. + * @param Delay: Delay in ms + * @retval None + */ +void USBD_LL_Delay(uint32_t Delay) +{ + HAL_Delay(Delay); +} + +/** + * @brief Static single allocation. + * @param size: Size of allocated memory + * @retval None + */ +void *USBD_static_malloc(uint32_t size) +{ + static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */ + return mem; +} + +/** + * @brief Dummy memory free + * @param p: Pointer to allocated memory address + * @retval None + */ +void USBD_static_free(void *p) +{ + +} + +/** + * @brief Software Device Connection + * @param hpcd: PCD handle + * @param state: Connection state (0: disconnected / 1: connected) + * @retval None + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +#else +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + /* USER CODE BEGIN 6 */ + if (state == 1) + { + /* Configure Low connection state. */ + + } + else + { + /* Configure High connection state. */ + + } + /* USER CODE END 6 */ +} + +/** + * @brief Retuns the USB status depending on the HAL status: + * @param hal_status: HAL status + * @retval USB status + */ +USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status) +{ + USBD_StatusTypeDef usb_status = USBD_OK; + + switch (hal_status) + { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Maple/USB_DEVICE/Target/usbd_conf.h b/Maple/USB_DEVICE/Target/usbd_conf.h new file mode 100644 index 0000000..4d0a2de --- /dev/null +++ b/Maple/USB_DEVICE/Target/usbd_conf.h @@ -0,0 +1,177 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : usbd_conf.h + * @version : v2.0_Cube + * @brief : Header for usbd_conf.c file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CONF__H__ +#define __USBD_CONF__H__ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include +#include +#include +#include "main.h" +#include "stm32f1xx.h" +#include "stm32f1xx_hal.h" + +/* USER CODE BEGIN INCLUDE */ + +/* USER CODE END INCLUDE */ + +/** @addtogroup USBD_OTG_DRIVER + * @{ + */ + +/** @defgroup USBD_CONF USBD_CONF + * @brief Configuration file for Usb otg low level driver. + * @{ + */ + +/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables + * @brief Public variables. + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines + * @brief Defines for configuration of the Usb device. + * @{ + */ + +/*---------- -----------*/ +#define USBD_MAX_NUM_INTERFACES 1 +/*---------- -----------*/ +#define USBD_MAX_NUM_CONFIGURATION 1 +/*---------- -----------*/ +#define USBD_MAX_STR_DESC_SIZ 512 +/*---------- -----------*/ +#define USBD_DEBUG_LEVEL 0 +/*---------- -----------*/ +#define USBD_SELF_POWERED 1 +/*---------- -----------*/ +#define MAX_STATIC_ALLOC_SIZE 512 + +/****************************************/ +/* #define for FS and HS identification */ +#define DEVICE_FS 0 + +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros + * @brief Aliases. + * @{ + */ + +/* Memory management macros */ + +/** Alias for memory allocation. */ +#define USBD_malloc (uint32_t *)USBD_static_malloc + +/** Alias for memory release. */ +#define USBD_free USBD_static_free + +/** Alias for memory set. */ +#define USBD_memset /* Not used */ + +/** Alias for memory copy. */ +#define USBD_memcpy /* Not used */ + +/** Alias for delay. */ +#define USBD_Delay HAL_Delay + +/* For footprint reasons and since only one allocation is handled in the HID class + driver, the malloc/free is changed into a static allocation method */ +void *USBD_static_malloc(uint32_t size); +void USBD_static_free(void *p); + +/* DEBUG macros */ + +#if (USBD_DEBUG_LEVEL > 0) +#define USBD_UsrLog(...) printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_UsrLog(...) +#endif + +#if (USBD_DEBUG_LEVEL > 1) + +#define USBD_ErrLog(...) printf("ERROR: ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_ErrLog(...) +#endif + +#if (USBD_DEBUG_LEVEL > 2) +#define USBD_DbgLog(...) printf("DEBUG : ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_DbgLog(...) +#endif + +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types + * @brief Types. + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype + * @brief Declaration of public functions for Usb device. + * @{ + */ + +/* Exported functions -------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CONF__H__ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/.cproject b/Relays/.cproject new file mode 100644 index 0000000..2e02e96 --- /dev/null +++ b/Relays/.cproject @@ -0,0 +1,204 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Relays/.mxproject b/Relays/.mxproject new file mode 100644 index 0000000..59c9b83 --- /dev/null +++ b/Relays/.mxproject @@ -0,0 +1,25 @@ +[PreviousLibFiles] +LibFiles=Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h;Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_armv8mbl.h; + +[PreviousUsedCubeIDEFiles] +SourceFiles=Core/Src/main.c;Core/Src/stm32f0xx_it.c;Core/Src/stm32f0xx_hal_msp.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Core/Src/system_stm32f0xx.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Core/Src/system_stm32f0xx.c;Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c;; +HeaderPath=Drivers/STM32F0xx_HAL_Driver/Inc;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F0xx/Include;Drivers/CMSIS/Include;Core/Inc; +CDefines=USE_HAL_DRIVER;STM32F030x6;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=3 +HeaderFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Inc/stm32f0xx_it.h +HeaderFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Inc/stm32f0xx_hal_conf.h +HeaderFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Inc/main.h +HeaderFolderListSize=1 +HeaderPath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Inc +HeaderFiles=; +SourceFileListSize=3 +SourceFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Src/stm32f0xx_it.c +SourceFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Src/stm32f0xx_hal_msp.c +SourceFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Src/main.c +SourceFolderListSize=1 +SourcePath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/Core/Src +SourceFiles=; + diff --git a/Relays/.project b/Relays/.project new file mode 100644 index 0000000..f2670f5 --- /dev/null +++ b/Relays/.project @@ -0,0 +1,34 @@ + + + Relays + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + com.st.stm32cube.ide.mcu.MCUProjectNature + com.st.stm32cube.ide.mcu.MCUCubeProjectNature + org.eclipse.cdt.core.cnature + org.eclipse.cdt.core.ccnature + com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature + com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature + com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature + com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature + com.st.stm32cube.ide.mcu.MCURootProjectNature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/Relays/.settings/language.settings.xml b/Relays/.settings/language.settings.xml new file mode 100644 index 0000000..77690bd --- /dev/null +++ b/Relays/.settings/language.settings.xml @@ -0,0 +1,27 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Relays/.settings/stm32cubeide.project.prefs b/Relays/.settings/stm32cubeide.project.prefs new file mode 100644 index 0000000..c3aba1c --- /dev/null +++ b/Relays/.settings/stm32cubeide.project.prefs @@ -0,0 +1,3 @@ +8DF89ED150041C4CBC7CB9A9CAA90856=49107D41B9D8B3F70076AA98DDE0F17D +DC22A860405A8BF2F2C095E5B6529F12=49107D41B9D8B3F70076AA98DDE0F17D +eclipse.preferences.version=1 diff --git a/Relays/Core/Inc/main.h b/Relays/Core/Inc/main.h new file mode 100644 index 0000000..2375212 --- /dev/null +++ b/Relays/Core/Inc/main.h @@ -0,0 +1,88 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define IN2_Pin GPIO_PIN_0 +#define IN2_GPIO_Port GPIOA +#define IN1_Pin GPIO_PIN_1 +#define IN1_GPIO_Port GPIOA +#define LED_Pin GPIO_PIN_2 +#define LED_GPIO_Port GPIOA +#define TEN_Pin GPIO_PIN_5 +#define TEN_GPIO_Port GPIOA +#define Button_Pin GPIO_PIN_6 +#define Button_GPIO_Port GPIOA +#define Relay1_Pin GPIO_PIN_7 +#define Relay1_GPIO_Port GPIOA +#define Relay2_Pin GPIO_PIN_1 +#define Relay2_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +_Bool _byte_received; +uint8_t _byte; + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Core/Inc/stm32f0xx_hal_conf.h b/Relays/Core/Inc/stm32f0xx_hal_conf.h new file mode 100644 index 0000000..cb93603 --- /dev/null +++ b/Relays/Core/Inc/stm32f0xx_hal_conf.h @@ -0,0 +1,322 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_CONF_H +#define __STM32F0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + /*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_CAN_MODULE_ENABLED */ +/*#define HAL_CEC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator for ADC (HSI14) value. + */ +#if !defined (HSI14_VALUE) +#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI14_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSI) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */ + /* Warning: Must be set to higher priority for HAL_Delay() */ + /* and HAL_GetTick() usage under interrupt context */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 0 +#define DATA_CACHE_ENABLE 0 +#define USE_SPI_CRC 0U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f0xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Core/Inc/stm32f0xx_it.h b/Relays/Core/Inc/stm32f0xx_it.h new file mode 100644 index 0000000..53af004 --- /dev/null +++ b/Relays/Core/Inc/stm32f0xx_it.h @@ -0,0 +1,66 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f0xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_IT_H +#define __STM32F0xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void SVC_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +void USART1_IRQHandler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Core/Src/MySensors.c b/Relays/Core/Src/MySensors.c new file mode 100644 index 0000000..840923a --- /dev/null +++ b/Relays/Core/Src/MySensors.c @@ -0,0 +1,445 @@ +#include "main.h" +#include +#include +#include "MySensors.h" + +#define ICSC_SYS_PACK 0x58 +#define SOH 1 +#define STX 2 +#define ETX 3 +#define EOT 4 + +// message buffers +MyMessage _msg; // Buffer for incoming messages +MyMessage _msgTmp; // Buffer for temporary messages (acks and nonces among others) + +// Receiving header information +char _header[6]; + +// Reception state machine control and storage variables +unsigned char _recPhase; +unsigned char _recPos; +unsigned char _recCommand; +unsigned char _recLen; +unsigned char _recStation; +unsigned char _recSender; +unsigned char _recCS; +unsigned char _recCalcCS; +unsigned char _packet_received; +UART_HandleTypeDef *_huart; + +char _data[MY_RS485_MAX_MESSAGE_LENGTH]; +uint8_t _packet_len; +unsigned char _packet_from; + +_Bool send(MyMessage *message, uint8_t data_type) +{ + message->last = MY_NODE_ID; + message->sender = MY_NODE_ID; + message->destination = GATEWAY_ADDRESS; + message->command_echo_payload = (data_type << 5) + C_SET; + + return transportSend(message); +} + +_Bool sendHeartbeat(void) +{ + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = GATEWAY_ADDRESS; + _msgTmp.command_echo_payload = (P_ULONG32 << 5) + C_INTERNAL; + _msgTmp.type = I_HEARTBEAT_RESPONSE; + _msgTmp.version_length = (4 << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + _msgTmp.ulValue = 0; + + return transportSend(&_msgTmp); +} + +_Bool present(const uint8_t childSensorId, const mysensors_sensor_t sensorType, char *desc) +{ + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = GATEWAY_ADDRESS; + _msgTmp.command_echo_payload = (P_STRING << 5) + C_PRESENTATION; + _msgTmp.type = sensorType; + _msgTmp.sensor = childSensorId; + _msgTmp.version_length = (strlen(desc) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + strcpy((char *)_msgTmp.data, desc); + + return transportSend(&_msgTmp); +} + +void registerNode(void) +{ + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = GATEWAY_ADDRESS; + _msgTmp.command_echo_payload = (P_BYTE << 5) + C_INTERNAL; + _msgTmp.type = I_REGISTRATION_REQUEST; + _msgTmp.sensor = 0; + _msgTmp.version_length = (1 << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + _msgTmp.bValue = MY_CORE_VERSION; + + transportSend(&_msgTmp); +} + +void sendLibraryInfo(void) +{ + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = GATEWAY_ADDRESS; + _msgTmp.command_echo_payload = (P_STRING << 5) + C_INTERNAL; + _msgTmp.type = I_VERSION; + _msgTmp.version_length = (strlen(MY_LIBRARY_VERSION) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + strcpy((char *)_msgTmp.data, MY_LIBRARY_VERSION); + + transportSend(&_msgTmp); +} + +_Bool sendSketchInfo(const char *name, const char *version) +{ + _Bool result = 1; + + if (name) { + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = GATEWAY_ADDRESS; + _msgTmp.command_echo_payload = (P_STRING << 5) + C_INTERNAL; + _msgTmp.type = I_SKETCH_NAME; + _msgTmp.version_length = (strlen(name) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + strcpy((char *)_msgTmp.data, name); + + result &= transportSend(&_msgTmp); + } + if (version) { + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = GATEWAY_ADDRESS; + _msgTmp.command_echo_payload = (P_STRING << 5) + C_INTERNAL; + _msgTmp.type = I_SKETCH_VERSION; + _msgTmp.version_length = (strlen(name) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + strcpy((char *)_msgTmp.data, version); + + result &= transportSend(&_msgTmp); + } + + sendLibraryInfo(); + + return result; +} + +// Message delivered through _msg +_Bool _processInternalCoreMessage(void) +{ + const uint8_t type = _msg.type; + if (_msg.sender == GATEWAY_ADDRESS) { + if (type == I_PRESENTATION) { + // Re-send node presentation to controller + present_node(); + } else if (type == I_HEARTBEAT_REQUEST) { + (void)sendHeartbeat(); + } else if (type == I_REBOOT) { + NVIC_SystemReset(); + } else if (type == I_VERSION) { + sendLibraryInfo(); + } else { + return 0; // further processing required + } + } else { + return 0; // further processing required + } + return 1; // if not GW or no further processing required +} + +void transportProcessMessage(void) +{ + // get message length and limit size + const uint8_t msgLength = (_msg.version_length & 0xF8) >> 3; + // calculate expected length + + const uint8_t command = _msg.command_echo_payload & 0x07; + const uint8_t type = _msg.type; + const uint8_t sender = _msg.sender; + const uint8_t destination = _msg.destination; + + // Is message addressed to this node? + if (destination == MY_NODE_ID) { + // null terminate data + _msg.data[msgLength] = 0u; + // Check if sender requests an echo. + if (_msg.command_echo_payload & 0x08) { + memcpy(&_msgTmp, &_msg, sizeof(_msg)); // Copy message + // Reply without echo flag (otherwise we would end up in an eternal loop) + _msgTmp.command_echo_payload = _msgTmp.command_echo_payload & 0xE7; + _msgTmp.command_echo_payload = _msgTmp.command_echo_payload | 0x10; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = sender; + transportSend(&_msgTmp); + } + if(!(_msg.command_echo_payload & 0x10)) { + // only process if not ECHO + if (command == C_INTERNAL) { + if (type == I_ID_RESPONSE) { + return; // no further processing required + } + // general + if (type == I_PING) { + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = sender; + _msgTmp.command_echo_payload = (P_BYTE << 5) + C_INTERNAL; + _msgTmp.type = I_PONG; + _msgTmp.bValue = 1; + transportSend(&_msgTmp); + return; // no further processing required + } + if (type == I_PONG) { + return; // no further processing required + } + if (_processInternalCoreMessage()) { + return; // no further processing required + } + } + } + // Call incoming message callback if available + receive(&_msg); + } else if (destination == BROADCAST_ADDRESS) { + if (command == C_INTERNAL) { + if (type == I_DISCOVER_REQUEST) { + + HAL_Delay(MY_NODE_ID * 50); + + _msgTmp.last = MY_NODE_ID; + _msgTmp.sender = MY_NODE_ID; + _msgTmp.destination = sender; + _msgTmp.command_echo_payload = (P_BYTE << 5) + C_INTERNAL; + _msgTmp.type = I_DISCOVER_RESPONSE; + _msgTmp.bValue = GATEWAY_ADDRESS; + transportSend(&_msgTmp); + return; // no further processing required + } + } + if (command != C_INTERNAL) { + receive(&_msg); + } + } +} + +//Reset the state machine and release the data pointer +void _serialReset() +{ + _recPhase = 0; + _recPos = 0; + _recLen = 0; + _recCommand = 0; + _recCS = 0; + _recCalcCS = 0; +} + +// This is the main reception state machine. Progress through the states +// is keyed on either special control characters, or counted number of bytes +// received. If all the data is in the right format, and the calculated +// checksum matches the received checksum, AND the destination station is +// our station ID, then look for a registered command that matches the +// command code. If all the above is true, execute the command's +// function. +_Bool _serialProcess() +{ + unsigned char i; + if (!_byte_received) { + return 0; + } + _byte_received = 0; + + switch(_recPhase) { + + // Case 0 looks for the header. Bytes arrive in the serial interface and get + // shifted through a header buffer. When the start and end characters in + // the buffer match the SOH/STX pair, and the destination station ID matches + // our ID, save the header information and progress to the next state. + case 0: + memcpy(&_header[0],&_header[1],5); + _header[5] = _byte; + + if ((_header[0] == SOH) && (_header[5] == STX) && (_header[1] != _header[2])) { + _recCalcCS = 0; + _recStation = _header[1]; + _recSender = _header[2]; + _recCommand = _header[3]; + _recLen = _header[4]; + + for (i=1; i<=4; i++) { + _recCalcCS += _header[i]; + } + _recPhase = 1; + _recPos = 0; + + //Avoid _data[] overflow + if (_recLen >= MY_RS485_MAX_MESSAGE_LENGTH) { + _serialReset(); + break; + } + + //Check if we should process this message + //We reject the message if we are the sender + //We reject if we are not the receiver and message is not a broadcast + if ((_recSender == MY_NODE_ID) || + (_recStation != MY_NODE_ID && + _recStation != BROADCAST_ADDRESS)) { + _serialReset(); + break; + } + + if (_recLen == 0) { + _recPhase = 2; + } + + } + break; + + // Case 1 receives the data portion of the packet. Read in "_recLen" number + // of bytes and store them in the _data array. + case 1: + _data[_recPos++] = _byte; + _recCalcCS += _byte; + if (_recPos == _recLen) { + _recPhase = 2; + } + break; + + // After the data comes a single ETX character. Do we have it? If not, + // reset the state machine to default and start looking for a new header. + case 2: + // Packet properly terminated? + if (_byte == ETX) { + _recPhase = 3; + } else { + _serialReset(); + } + break; + + // Next comes the checksum. We have already calculated it from the incoming + // data, so just store the incoming checksum byte for later. + case 3: + _recCS = _byte; + _recPhase = 4; + break; + + // The final state - check the last character is EOT and that the checksum matches. + // If that test passes, then look for a valid command callback to execute. + // Execute it if found. + case 4: + if (_byte == EOT) { + if (_recCS == _recCalcCS) { + // First, check for system level commands. It is possible + // to register your own callback as well for system level + // commands which will be called after the system default + // hook. + + switch (_recCommand) { + case ICSC_SYS_PACK: + _packet_from = _recSender; + _packet_len = _recLen; + _packet_received = 1; + break; + } + } + } + //Clear the data + _serialReset(); + //Return true, we have processed one command + return 1; + break; + } + return 1; +} + +_Bool transportSend(MyMessage* data) +{ + const char *datap = (const char *)data; + unsigned char i; + unsigned char len; + unsigned char cs = 0; + + // This is how many times to try and transmit before failing. + unsigned char timeout = 10; + + // Let's start out by looking for a collision. If there has been anything seen in + // the last millisecond, then wait for a random time and check again. + + while (_serialProcess()) { + unsigned char del; + del = rand() % 20; + for (i = 0; i < del; i++) { + HAL_Delay(1); + _serialProcess(); + } + timeout--; + if (timeout == 0) { + // Failed to transmit!!! + return 0; + } + } + + HAL_GPIO_WritePin(TEN_GPIO_Port, TEN_Pin, SET); + + // Start of header by writing multiple SOH + i = SOH; + for(uint8_t w=0; wdestination, 1, 20); + cs += data->destination; + i = MY_NODE_ID; + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + cs += MY_NODE_ID; + i = ICSC_SYS_PACK; // Command code + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + cs += ICSC_SYS_PACK; + len = (data->version_length >> 3) + V2_MYS_HEADER_SIZE; + HAL_UART_Transmit(_huart, (uint8_t*)&len, 1, 20); + cs += len; + i = STX; + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + HAL_UART_Transmit(_huart, (uint8_t*)datap, len, len + 20); + for(i=0; i +#include + +#define MY_LIBRARY_VERSION "STM 1.0" + +#define GATEWAY_ADDRESS ((uint8_t)0) //!< Node ID for GW sketch +#define MY_NODE_ID ((uint8_t)200) +#define NODE_SENSOR_ID ((uint8_t)255) //!< Node child is always created/presented when a node is started +#define MY_CORE_VERSION ((uint8_t)2) //!< core version +#define MY_CORE_MIN_VERSION ((uint8_t)2) //!< min core version required for compatibility + +#define V2_MYS_HEADER_PROTOCOL_VERSION (2u) //!< Protocol version +#define V2_MYS_HEADER_SIZE (7u) //!< Header size +#define V2_MYS_HEADER_MAX_MESSAGE_SIZE (32u) //!< Max payload size + +#define V2_MYS_HEADER_VSL_VERSION_POS (0) //!< bitfield position version +#define V2_MYS_HEADER_VSL_VERSION_SIZE (2u) //!< size version field +#define V2_MYS_HEADER_VSL_SIGNED_POS (2u) //!< bitfield position signed field +#define V2_MYS_HEADER_VSL_SIGNED_SIZE (1u) //!< size signed field +#define V2_MYS_HEADER_VSL_LENGTH_POS (3u) //!< bitfield position length field +#define V2_MYS_HEADER_VSL_LENGTH_SIZE (5u) //!< size length field + +#define V2_MYS_HEADER_CEP_COMMAND_POS (0) //!< bitfield position command field +#define V2_MYS_HEADER_CEP_COMMAND_SIZE (3u) //!< size command field +#define V2_MYS_HEADER_CEP_ECHOREQUEST_POS (3u) //!< bitfield position echo request field +#define V2_MYS_HEADER_CEP_ECHOREQUEST_SIZE (1u) //!< size echo request field +#define V2_MYS_HEADER_CEP_ECHO_POS (4u) //!< bitfield position echo field +#define V2_MYS_HEADER_CEP_ECHO_SIZE (1u) //!< size echo field +#define V2_MYS_HEADER_CEP_PAYLOADTYPE_POS (5u) //!< bitfield position payload type field +#define V2_MYS_HEADER_CEP_PAYLOADTYPE_SIZE (3u) //!< size payload type field + +#define MAX_MESSAGE_SIZE V2_MYS_HEADER_MAX_MESSAGE_SIZE //!< The maximum size of a message (including header) +#define HEADER_SIZE V2_MYS_HEADER_SIZE //!< The size of the header +#define MAX_PAYLOAD_SIZE (MAX_MESSAGE_SIZE - HEADER_SIZE) //!< The maximum size of a payload depends on #MAX_MESSAGE_SIZE and #HEADER_SIZE +#define MY_RS485_MAX_MESSAGE_LENGTH MAX_MESSAGE_SIZE +#define MY_RS485_SOH_COUNT 1 + +#define MY_CAP_RESET "N" +#define MY_CAP_OTA_FW "N" +#define MY_CAP_RADIO "S" +#define MY_CAP_TYPE "N" +#define MY_CAP_ARCH "F" +#define MY_CAP_SIGN "-" +#define MY_CAP_RXBUF "-" +#define MY_CAP_ENCR "-" +#define MY_CAPABILITIES MY_CAP_RESET MY_CAP_RADIO MY_CAP_OTA_FW MY_CAP_TYPE MY_CAP_ARCH MY_CAP_SIGN MY_CAP_RXBUF MY_CAP_ENCR + +#define MY_TRANSPORT_MAX_TX_FAILURES (10u) //!< search for a new parent node after this many transmission failures, higher threshold for repeating nodes +#define MY_TRANSPORT_MAX_TSM_FAILURES (7u) //!< Max. number of consecutive TSM failure state entries (3bits) +#define MY_TRANSPORT_TIMEOUT_EXT_FAILURE_STATE_MS (60*1000ul) //!< Duration extended failure state (in ms) +#define MY_TRANSPORT_STATE_TIMEOUT_MS (2*1000ul) //!< general state timeout (in ms) +#define MY_TRANSPORT_CHKUPL_INTERVAL_MS (10*1000ul) //!< Interval to re-check uplink (in ms) +#define MY_TRANSPORT_STATE_RETRIES (3u) //!< retries before switching to FAILURE + +#define BROADCAST_ADDRESS (255u) //!< broadcasts are addressed to ID 255 +#define MAX_SUBSEQ_MSGS (5u) //!< Maximum number of subsequently processed messages in FIFO (to prevent transport deadlock if HW issue) + +/** +* @brief Node core configuration +*/ + +/// @brief The command field (message-type) defines the overall properties of a message +typedef enum { + C_PRESENTATION = 0, //!< Sent by a node when they present attached sensors. This is usually done in presentation() at startup. + C_SET = 1, //!< This message is sent from or to a sensor when a sensor value should be updated. + C_REQ = 2, //!< Requests a variable value (usually from an actuator destined for controller). + C_INTERNAL = 3, //!< Internal MySensors messages (also include common messages provided/generated by the library). + C_STREAM = 4, //!< For firmware and other larger chunks of data that need to be divided into pieces. + C_RESERVED_5 = 5, //!< C_RESERVED_5 + C_RESERVED_6 = 6, //!< C_RESERVED_6 + C_INVALID_7 = 7 //!< C_INVALID_7 +} mysensors_command_t; + +/// @brief Type of sensor (used when presenting sensors) +typedef enum { + S_DOOR = 0, //!< Door sensor, V_TRIPPED, V_ARMED + S_MOTION = 1, //!< Motion sensor, V_TRIPPED, V_ARMED + S_SMOKE = 2, //!< Smoke sensor, V_TRIPPED, V_ARMED + S_BINARY = 3, //!< Binary light or relay, V_STATUS, V_WATT + S_LIGHT = 3, //!< \deprecated Same as S_BINARY + S_DIMMER = 4, //!< Dimmable light or fan device, V_STATUS (on/off), V_PERCENTAGE (dimmer level 0-100), V_WATT + S_COVER = 5, //!< Blinds or window cover, V_UP, V_DOWN, V_STOP, V_PERCENTAGE (open/close to a percentage) + S_TEMP = 6, //!< Temperature sensor, V_TEMP + S_HUM = 7, //!< Humidity sensor, V_HUM + S_BARO = 8, //!< Barometer sensor, V_PRESSURE, V_FORECAST + S_WIND = 9, //!< Wind sensor, V_WIND, V_GUST + S_RAIN = 10, //!< Rain sensor, V_RAIN, V_RAINRATE + S_UV = 11, //!< Uv sensor, V_UV + S_WEIGHT = 12, //!< Personal scale sensor, V_WEIGHT, V_IMPEDANCE + S_POWER = 13, //!< Power meter, V_WATT, V_KWH, V_VAR, V_VA, V_POWER_FACTOR + S_HEATER = 14, //!< Header device, V_HVAC_SETPOINT_HEAT, V_HVAC_FLOW_STATE, V_TEMP + S_DISTANCE = 15, //!< Distance sensor, V_DISTANCE + S_LIGHT_LEVEL = 16, //!< Light level sensor, V_LIGHT_LEVEL (uncalibrated in percentage), V_LEVEL (light level in lux) + S_ARDUINO_NODE = 17, //!< Used (internally) for presenting a non-repeating Arduino node + S_ARDUINO_REPEATER_NODE = 18, //!< Used (internally) for presenting a repeating Arduino node + S_LOCK = 19, //!< Lock device, V_LOCK_STATUS + S_IR = 20, //!< IR device, V_IR_SEND, V_IR_RECEIVE + S_WATER = 21, //!< Water meter, V_FLOW, V_VOLUME + S_AIR_QUALITY = 22, //!< Air quality sensor, V_LEVEL + S_CUSTOM = 23, //!< Custom sensor + S_DUST = 24, //!< Dust sensor, V_LEVEL + S_SCENE_CONTROLLER = 25, //!< Scene controller device, V_SCENE_ON, V_SCENE_OFF. + S_RGB_LIGHT = 26, //!< RGB light. Send color component data using V_RGB. Also supports V_WATT + S_RGBW_LIGHT = 27, //!< RGB light with an additional White component. Send data using V_RGBW. Also supports V_WATT + S_COLOR_SENSOR = 28, //!< Color sensor, send color information using V_RGB + S_HVAC = 29, //!< Thermostat/HVAC device. V_HVAC_SETPOINT_HEAT, V_HVAC_SETPOINT_COLD, V_HVAC_FLOW_STATE, V_HVAC_FLOW_MODE, V_TEMP + S_MULTIMETER = 30, //!< Multimeter device, V_VOLTAGE, V_CURRENT, V_IMPEDANCE + S_SPRINKLER = 31, //!< Sprinkler, V_STATUS (turn on/off), V_TRIPPED (if fire detecting device) + S_WATER_LEAK = 32, //!< Water leak sensor, V_TRIPPED, V_ARMED + S_SOUND = 33, //!< Sound sensor, V_TRIPPED, V_ARMED, V_LEVEL (sound level in dB) + S_VIBRATION = 34, //!< Vibration sensor, V_TRIPPED, V_ARMED, V_LEVEL (vibration in Hz) + S_MOISTURE = 35, //!< Moisture sensor, V_TRIPPED, V_ARMED, V_LEVEL (water content or moisture in percentage?) + S_INFO = 36, //!< LCD text device / Simple information device on controller, V_TEXT + S_GAS = 37, //!< Gas meter, V_FLOW, V_VOLUME + S_GPS = 38, //!< GPS Sensor, V_POSITION + S_WATER_QUALITY = 39 //!< V_TEMP, V_PH, V_ORP, V_EC, V_STATUS +} mysensors_sensor_t; + +/// @brief Type of sensor data (for set/req/echo messages) +typedef enum { + V_TEMP = 0, //!< S_TEMP. Temperature S_TEMP, S_HEATER, S_HVAC + V_HUM = 1, //!< S_HUM. Humidity + V_STATUS = 2, //!< S_BINARY, S_DIMMER, S_SPRINKLER, S_HVAC, S_HEATER. Used for setting/reporting binary (on/off) status. 1=on, 0=off + V_LIGHT = 2, //!< \deprecated Same as V_STATUS + V_PERCENTAGE = 3, //!< S_DIMMER. Used for sending a percentage value 0-100 (%). + V_DIMMER = 3, //!< \deprecated Same as V_PERCENTAGE + V_PRESSURE = 4, //!< S_BARO. Atmospheric Pressure + V_FORECAST = 5, //!< S_BARO. Whether forecast. string of "stable", "sunny", "cloudy", "unstable", "thunderstorm" or "unknown" + V_RAIN = 6, //!< S_RAIN. Amount of rain + V_RAINRATE = 7, //!< S_RAIN. Rate of rain + V_WIND = 8, //!< S_WIND. Wind speed + V_GUST = 9, //!< S_WIND. Gust + V_DIRECTION = 10, //!< S_WIND. Wind direction 0-360 (degrees) + V_UV = 11, //!< S_UV. UV light level + V_WEIGHT = 12, //!< S_WEIGHT. Weight(for scales etc) + V_DISTANCE = 13, //!< S_DISTANCE. Distance + V_IMPEDANCE = 14, //!< S_MULTIMETER, S_WEIGHT. Impedance value + V_ARMED = 15, //!< S_DOOR, S_MOTION, S_SMOKE, S_SPRINKLER. Armed status of a security sensor. 1 = Armed, 0 = Bypassed + V_TRIPPED = 16, //!< S_DOOR, S_MOTION, S_SMOKE, S_SPRINKLER, S_WATER_LEAK, S_SOUND, S_VIBRATION, S_MOISTURE. Tripped status of a security sensor. 1 = Tripped, 0 + V_WATT = 17, //!< S_POWER, S_BINARY, S_DIMMER, S_RGB_LIGHT, S_RGBW_LIGHT. Watt value for power meters + V_KWH = 18, //!< S_POWER. Accumulated number of KWH for a power meter + V_SCENE_ON = 19, //!< S_SCENE_CONTROLLER. Turn on a scene + V_SCENE_OFF = 20, //!< S_SCENE_CONTROLLER. Turn of a scene + V_HVAC_FLOW_STATE = 21, //!< S_HEATER, S_HVAC. HVAC flow state ("Off", "HeatOn", "CoolOn", or "AutoChangeOver") + V_HEATER = 21, //!< \deprecated Same as V_HVAC_FLOW_STATE + V_HVAC_SPEED = 22, //!< S_HVAC, S_HEATER. HVAC/Heater fan speed ("Min", "Normal", "Max", "Auto") + V_LIGHT_LEVEL = 23, //!< S_LIGHT_LEVEL. Uncalibrated light level. 0-100%. Use V_LEVEL for light level in lux + V_VAR1 = 24, //!< VAR1 + V_VAR2 = 25, //!< VAR2 + V_VAR3 = 26, //!< VAR3 + V_VAR4 = 27, //!< VAR4 + V_VAR5 = 28, //!< VAR5 + V_UP = 29, //!< S_COVER. Window covering. Up + V_DOWN = 30, //!< S_COVER. Window covering. Down + V_STOP = 31, //!< S_COVER. Window covering. Stop + V_IR_SEND = 32, //!< S_IR. Send out an IR-command + V_IR_RECEIVE = 33, //!< S_IR. This message contains a received IR-command + V_FLOW = 34, //!< S_WATER. Flow of water (in meter) + V_VOLUME = 35, //!< S_WATER. Water volume + V_LOCK_STATUS = 36, //!< S_LOCK. Set or get lock status. 1=Locked, 0=Unlocked + V_LEVEL = 37, //!< S_DUST, S_AIR_QUALITY, S_SOUND (dB), S_VIBRATION (hz), S_LIGHT_LEVEL (lux) + V_VOLTAGE = 38, //!< S_MULTIMETER + V_CURRENT = 39, //!< S_MULTIMETER + V_RGB = 40, //!< S_RGB_LIGHT, S_COLOR_SENSOR. Sent as ASCII hex: RRGGBB (RR=red, GG=green, BB=blue component) + V_RGBW = 41, //!< S_RGBW_LIGHT. Sent as ASCII hex: RRGGBBWW (WW=white component) + V_ID = 42, //!< Used for sending in sensors hardware ids (i.e. OneWire DS1820b). + V_UNIT_PREFIX = 43, //!< Allows sensors to send in a string representing the unit prefix to be displayed in GUI, not parsed by controller! E.g. cm, m, km, inch. + V_HVAC_SETPOINT_COOL = 44, //!< S_HVAC. HVAC cool setpoint (Integer between 0-100) + V_HVAC_SETPOINT_HEAT = 45, //!< S_HEATER, S_HVAC. HVAC/Heater setpoint (Integer between 0-100) + V_HVAC_FLOW_MODE = 46, //!< S_HVAC. Flow mode for HVAC ("Auto", "ContinuousOn", "PeriodicOn") + V_TEXT = 47, //!< S_INFO. Text message to display on LCD or controller device + V_CUSTOM = 48, //!< Custom messages used for controller/inter node specific commands, preferably using S_CUSTOM device type. + V_POSITION = 49, //!< GPS position and altitude. Payload: latitude;longitude;altitude(m). E.g. "55.722526;13.017972;18" + V_IR_RECORD = 50, //!< Record IR codes S_IR for playback + V_PH = 51, //!< S_WATER_QUALITY, water PH + V_ORP = 52, //!< S_WATER_QUALITY, water ORP : redox potential in mV + V_EC = 53, //!< S_WATER_QUALITY, water electric conductivity μS/cm (microSiemens/cm) + V_VAR = 54, //!< S_POWER, Reactive power: volt-ampere reactive (var) + V_VA = 55, //!< S_POWER, Apparent power: volt-ampere (VA) + V_POWER_FACTOR = 56, //!< S_POWER, Ratio of real power to apparent power: floating point value in the range [-1,..,1] +} mysensors_data_t; + +/// @brief Type of internal messages (for internal messages) +typedef enum { + I_BATTERY_LEVEL = 0, //!< Battery level + I_TIME = 1, //!< Time (request/response) + I_VERSION = 2, //!< Version + I_ID_REQUEST = 3, //!< ID request + I_ID_RESPONSE = 4, //!< ID response + I_INCLUSION_MODE = 5, //!< Inclusion mode + I_CONFIG = 6, //!< Config (request/response) + I_FIND_PARENT_REQUEST = 7, //!< Find parent + I_FIND_PARENT_RESPONSE = 8, //!< Find parent response + I_LOG_MESSAGE = 9, //!< Log message + I_CHILDREN = 10, //!< Children + I_SKETCH_NAME = 11, //!< Sketch name + I_SKETCH_VERSION = 12, //!< Sketch version + I_REBOOT = 13, //!< Reboot request + I_GATEWAY_READY = 14, //!< Gateway ready + I_SIGNING_PRESENTATION = 15, //!< Provides signing related preferences (first byte is preference version) + I_NONCE_REQUEST = 16, //!< Request for a nonce + I_NONCE_RESPONSE = 17, //!< Payload is nonce data + I_HEARTBEAT_REQUEST = 18, //!< Heartbeat request + I_PRESENTATION = 19, //!< Presentation message + I_DISCOVER_REQUEST = 20, //!< Discover request + I_DISCOVER_RESPONSE = 21, //!< Discover response + I_HEARTBEAT_RESPONSE = 22, //!< Heartbeat response + I_LOCKED = 23, //!< Node is locked (reason in string-payload) + I_PING = 24, //!< Ping sent to node, payload incremental hop counter + I_PONG = 25, //!< In return to ping, sent back to sender, payload incremental hop counter + I_REGISTRATION_REQUEST = 26, //!< Register request to GW + I_REGISTRATION_RESPONSE = 27, //!< Register response from GW + I_DEBUG = 28, //!< Debug message + I_SIGNAL_REPORT_REQUEST = 29, //!< Device signal strength request + I_SIGNAL_REPORT_REVERSE = 30, //!< Internal + I_SIGNAL_REPORT_RESPONSE = 31, //!< Device signal strength response (RSSI) + I_PRE_SLEEP_NOTIFICATION = 32, //!< Message sent before node is going to sleep + I_POST_SLEEP_NOTIFICATION = 33 //!< Message sent after node woke up (if enabled) +} mysensors_internal_t; + +/// @brief Type of data stream (for streamed message) +typedef enum { + ST_FIRMWARE_CONFIG_REQUEST = 0, //!< Request new FW, payload contains current FW details + ST_FIRMWARE_CONFIG_RESPONSE = 1, //!< New FW details to initiate OTA FW update + ST_FIRMWARE_REQUEST = 2, //!< Request FW block + ST_FIRMWARE_RESPONSE = 3, //!< Response FW block + ST_SOUND = 4, //!< Sound + ST_IMAGE = 5, //!< Image + ST_FIRMWARE_CONFIRM = 6, //!< Mark running firmware as valid (MyOTAFirmwareUpdateNVM + mcuboot) + ST_FIRMWARE_RESPONSE_RLE = 7, //!< Response FW block with run length encoded data +} mysensors_stream_t; + +/// @brief Type of payload +typedef enum { + P_STRING = 0, //!< Payload type is string + P_BYTE = 1, //!< Payload type is byte + P_INT16 = 2, //!< Payload type is INT16 + P_UINT16 = 3, //!< Payload type is UINT16 + P_LONG32 = 4, //!< Payload type is INT32 + P_ULONG32 = 5, //!< Payload type is UINT32 + P_CUSTOM = 6, //!< Payload type is binary + P_FLOAT32 = 7 //!< Payload type is float32 +} mysensors_payload_t; + +typedef union { + struct { + + uint8_t last; //!< 8 bit - Id of last node this message passed + uint8_t sender; //!< 8 bit - Id of sender node (origin) + uint8_t destination; //!< 8 bit - Id of destination node + + /** + * 2 bit - Protocol version
+ * 1 bit - Signed flag
+ * 5 bit - Length of payload + */ + uint8_t version_length; + + /** + * 3 bit - Command type
+ * 1 bit - Request an echo - Indicator that receiver should echo the message back to the sender
+ * 1 bit - Is echo message - Indicator that this is the echoed message
+ * 3 bit - Payload data type + */ + uint8_t command_echo_payload; + + uint8_t type; //!< 8 bit - Type varies depending on command + uint8_t sensor; //!< 8 bit - Id of sensor that this message concerns. + + /* + * Each message can transfer a payload. We add one extra byte for string + * terminator \0 to be "printable" this is not transferred OTA + * This union is used to simplify the construction of the binary data types transferred. + */ + union { + uint8_t bValue; //!< unsigned byte value (8-bit) + uint16_t uiValue; //!< unsigned integer value (16-bit) + int16_t iValue; //!< signed integer value (16-bit) + uint32_t ulValue; //!< unsigned long value (32-bit) + int32_t lValue; //!< signed long value (32-bit) + struct { //!< Float messages + float fValue; + uint8_t fPrecision; //!< Number of decimals when serializing + }; + char data[MAX_PAYLOAD_SIZE + 1]; //!< Buffer for raw payload data + } __attribute__((packed)); //!< Doxygen will complain without this comment + }; + uint8_t array[HEADER_SIZE + MAX_PAYLOAD_SIZE + 1]; //!< buffer for entire message +} __attribute__((packed)) MyMessage; + +void registerNode(void); +void present_node(void); +_Bool present(const uint8_t sensorId, const mysensors_sensor_t sensorType, char *desc); +_Bool sendSketchInfo(const char *name, const char *version); +_Bool send(MyMessage *msg,uint8_t data_type); +_Bool sendHeartbeat(void); +void receive(const MyMessage*); +void transportProcessMessage(void); +_Bool transportSend(MyMessage *message); +void transportInitialise(UART_HandleTypeDef *huart); +void transportProcess(void); +uint8_t transportReceive(void *data); +_Bool isMessageReceived(void); +void resetMessageReceived(void); +uint32_t transportGetHeartbeat(void); + +#endif // MySensors_h diff --git a/Relays/Core/Src/main.c b/Relays/Core/Src/main.c new file mode 100644 index 0000000..1a80b4f --- /dev/null +++ b/Relays/Core/Src/main.c @@ -0,0 +1,390 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +#include +#include "MySensors.h" + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +#define IN_ID1 1 +#define IN_ID2 2 +#define RELAY_ID1 3 +#define RELAY_ID2 4 + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +UART_HandleTypeDef huart1; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_USART1_UART_Init(void); +/* USER CODE BEGIN PFP */ +//MyMessage msg; + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USART1_UART_Init(); + /* USER CODE BEGIN 2 */ + HAL_GPIO_WritePin(Relay1_GPIO_Port, Relay1_Pin, RESET); + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, RESET); + HAL_GPIO_WritePin(TEN_GPIO_Port, TEN_Pin, RESET); + + transportInitialise(&huart1); + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + uint8_t value; + static uint16_t loopv; + static uint16_t counter; + static uint8_t sentValue1=2; + static uint8_t sentValue2=2; + static uint8_t sentStatus=0; + static uint8_t button=0; + MyMessage msg; + + transportProcess(); // Process incoming data + + loopv++; + + value = HAL_GPIO_ReadPin(IN1_GPIO_Port, IN1_Pin); + + if (value != sentValue1) { + // Value has changed from last transmission, send the updated value + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + msg.sensor = IN_ID1; + msg.type = V_TRIPPED; + msg.bValue = value; + send(&msg, P_BYTE); + sentValue1 = value; + } + + value = HAL_GPIO_ReadPin(IN2_GPIO_Port, IN2_Pin); + + if (value != sentValue2) { + // Value has changed from last transmission, send the updated value + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + msg.sensor = IN_ID2; + msg.type = V_TRIPPED; + msg.bValue = value; + send(&msg, P_BYTE); + sentValue2 = value; + } + + value = HAL_GPIO_ReadPin(Button_GPIO_Port, Button_Pin); + + if (value != button) { + button = value; + if (button) { + sentValue1 = 2; + sentValue2 = 2; + sentStatus = 0; + + present_node(); + } + } + + if (sentStatus == 0) { + sentStatus = 1; + + value = HAL_GPIO_ReadPin(Relay1_GPIO_Port, Relay1_Pin); + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + msg.sensor = RELAY_ID1; + msg.type = V_STATUS; + if (value) + strcpy(msg.data, "1"); + else + strcpy(msg.data, "0"); + send(&msg, P_STRING); + + value = HAL_GPIO_ReadPin(Relay2_GPIO_Port, Relay2_Pin); + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + msg.sensor = RELAY_ID2; + msg.type = V_STATUS; + if (value) + strcpy(msg.data, "1"); + else + strcpy(msg.data, "0"); + send(&msg, P_STRING); + } + + if (loopv == 0) { + HAL_GPIO_TogglePin(LED_GPIO_Port, LED_Pin); + counter++; + if (counter > 3600) { + sentValue1 = 2; + sentValue2 = 2; + sentStatus = 0; + counter = 0; + } + } + } + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL3; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1; + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 9600; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + __HAL_UART_ENABLE_IT(&huart1, UART_IT_RXNE); + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOA, LED_Pin|TEN_Pin|Relay1_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pins : IN2_Pin IN1_Pin Button_Pin */ + GPIO_InitStruct.Pin = IN2_Pin|IN1_Pin|Button_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pins : LED_Pin Relay1_Pin */ + GPIO_InitStruct.Pin = LED_Pin|Relay1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pin : TEN_Pin */ + GPIO_InitStruct.Pin = TEN_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(TEN_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : Relay2_Pin */ + GPIO_InitStruct.Pin = Relay2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(Relay2_GPIO_Port, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ +void present_node(void) +{ + present(NODE_SENSOR_ID, S_ARDUINO_NODE,"STM Relay Board"); + sendSketchInfo("Relay_STM", "1.1"); + present(IN_ID1, S_DOOR, "Input ID1"); + present(IN_ID2, S_DOOR, "Input ID2"); + present(RELAY_ID1, S_BINARY, "Relay 1"); + present(RELAY_ID2, S_BINARY, "Relay 2"); + registerNode(); + HAL_Delay(20); +} + +void receive(const MyMessage* mymsg) +{ + uint8_t sensor; + + // We only expect one type of message from controller. But we better check anyway. + if (mymsg->type == V_STATUS) { + sensor = mymsg->sensor; + if (sensor == 3) + HAL_GPIO_WritePin(Relay1_GPIO_Port, Relay1_Pin, (mymsg->data[0]=='1')?SET:RESET); + if (sensor == 4) + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, (mymsg->data[0]=='1')?SET:RESET); + } +} +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Core/Src/stm32f0xx_hal_msp.c b/Relays/Core/Src/stm32f0xx_hal_msp.c new file mode 100644 index 0000000..0b6caae --- /dev/null +++ b/Relays/Core/Src/stm32f0xx_hal_msp.c @@ -0,0 +1,154 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f0xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF1_USART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USART1 interrupt Init */ + HAL_NVIC_SetPriority(USART1_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USART1_IRQn); + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10); + + /* USART1 interrupt DeInit */ + HAL_NVIC_DisableIRQ(USART1_IRQn); + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Core/Src/stm32f0xx_it.c b/Relays/Core/Src/stm32f0xx_it.c new file mode 100644 index 0000000..fd8fd07 --- /dev/null +++ b/Relays/Core/Src/stm32f0xx_it.c @@ -0,0 +1,164 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f0xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32f0xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ +extern UART_HandleTypeDef huart1; +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M0 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVC_IRQn 0 */ + + /* USER CODE END SVC_IRQn 0 */ + /* USER CODE BEGIN SVC_IRQn 1 */ + + /* USER CODE END SVC_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32F0xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32f0xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles USART1 global interrupt. + */ +void USART1_IRQHandler(void) +{ + /* USER CODE BEGIN USART1_IRQn 0 */ + _byte = USART1->RDR; + _byte_received = 1; + return; // To avoid calling the handler at all + // (in case you want to save the time) + /* USER CODE END USART1_IRQn 0 */ + HAL_UART_IRQHandler(&huart1); + /* USER CODE BEGIN USART1_IRQn 1 */ + + /* USER CODE END USART1_IRQn 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Core/Src/syscalls.c b/Relays/Core/Src/syscalls.c new file mode 100644 index 0000000..4ec9584 --- /dev/null +++ b/Relays/Core/Src/syscalls.c @@ -0,0 +1,159 @@ +/** + ****************************************************************************** + * @file syscalls.c + * @author Auto-generated by STM32CubeIDE + * @brief STM32CubeIDE Minimal System calls file + * + * For more information about which c-functions + * need which of these lowlevel functions + * please consult the Newlib libc-manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include + + +/* Variables */ +//#undef errno +extern int errno; +extern int __io_putchar(int ch) __attribute__((weak)); +extern int __io_getchar(void) __attribute__((weak)); + +register char * stack_ptr asm("sp"); + +char *__env[1] = { 0 }; +char **environ = __env; + + +/* Functions */ +void initialise_monitor_handles() +{ +} + +int _getpid(void) +{ + return 1; +} + +int _kill(int pid, int sig) +{ + errno = EINVAL; + return -1; +} + +void _exit (int status) +{ + _kill(status, -1); + while (1) {} /* Make sure we hang here */ +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + *ptr++ = __io_getchar(); + } + +return len; +} + +__attribute__((weak)) int _write(int file, char *ptr, int len) +{ + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + __io_putchar(*ptr++); + } + return len; +} + +int _close(int file) +{ + return -1; +} + + +int _fstat(int file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _isatty(int file) +{ + return 1; +} + +int _lseek(int file, int ptr, int dir) +{ + return 0; +} + +int _open(char *path, int flags, ...) +{ + /* Pretend like we always fail */ + return -1; +} + +int _wait(int *status) +{ + errno = ECHILD; + return -1; +} + +int _unlink(char *name) +{ + errno = ENOENT; + return -1; +} + +int _times(struct tms *buf) +{ + return -1; +} + +int _stat(char *file, struct stat *st) +{ + st->st_mode = S_IFCHR; + return 0; +} + +int _link(char *old, char *new) +{ + errno = EMLINK; + return -1; +} + +int _fork(void) +{ + errno = EAGAIN; + return -1; +} + +int _execve(char *name, char **argv, char **env) +{ + errno = ENOMEM; + return -1; +} diff --git a/Relays/Core/Src/sysmem.c b/Relays/Core/Src/sysmem.c new file mode 100644 index 0000000..d7cc52c --- /dev/null +++ b/Relays/Core/Src/sysmem.c @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file sysmem.c + * @author Generated by STM32CubeIDE + * @brief STM32CubeIDE System Memory calls file + * + * For more information about which C functions + * need which of these lowlevel functions + * please consult the newlib libc manual + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include + +/** + * Pointer to the current high watermark of the heap usage + */ +static uint8_t *__sbrk_heap_end = NULL; + +/** + * @brief _sbrk() allocates memory to the newlib heap and is used by malloc + * and others from the C library + * + * @verbatim + * ############################################################################ + * # .data # .bss # newlib heap # MSP stack # + * # # # # Reserved by _Min_Stack_Size # + * ############################################################################ + * ^-- RAM start ^-- _end _estack, RAM end --^ + * @endverbatim + * + * This implementation starts allocating at the '_end' linker symbol + * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack + * The implementation considers '_estack' linker symbol to be RAM end + * NOTE: If the MSP stack, at any point during execution, grows larger than the + * reserved size, please increase the '_Min_Stack_Size'. + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + const uint8_t *max_heap = (uint8_t *)stack_limit; + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + { + __sbrk_heap_end = &_end; + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + { + errno = ENOMEM; + return (void *)-1; + } + + prev_heap_end = __sbrk_heap_end; + __sbrk_heap_end += incr; + + return (void *)prev_heap_end; +} diff --git a/Relays/Core/Src/system_stm32f0xx.c b/Relays/Core/Src/system_stm32f0xx.c new file mode 100644 index 0000000..1b0fbe5 --- /dev/null +++ b/Relays/Core/Src/system_stm32f0xx.c @@ -0,0 +1,247 @@ +/** + ****************************************************************************** + * @file system_stm32f0xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f0xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx_system + * @{ + */ + +/** @addtogroup STM32F0xx_System_Private_Includes + * @{ + */ + +#include "stm32f0xx.h" + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Defines + * @{ + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI_VALUE */ + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI48_VALUE */ +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 8000000; + +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* NOTE :SystemInit(): This function is called at startup just after reset and + before branch to main program. This call is made inside + the "startup_stm32f0xx.s" file. + User can setups the default system clock (System clock source, PLL Multiplier + and Divider factors, AHB/APBx prescalers and Flash settings). + */ +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case RCC_CFGR_SWS_HSE: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case RCC_CFGR_SWS_PLL: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMUL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1; + + if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV) + { + /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */ + SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull; + } +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) + else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV) + { + /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */ + SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull; + } +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */ + else + { +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \ + || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \ + || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */ + SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull; +#else + /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || + STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || + STM32F091xC || STM32F098xx || STM32F030xC */ + } + break; + default: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Core/Startup/startup_stm32f030f4px.s b/Relays/Core/Startup/startup_stm32f030f4px.s new file mode 100644 index 0000000..727c24d --- /dev/null +++ b/Relays/Core/Startup/startup_stm32f030f4px.s @@ -0,0 +1,258 @@ +/** + ****************************************************************************** + * @file startup_stm32f030x6.s + * @author MCD Application Team + * @brief STM32F030x4/STM32F030x6 devices vector table for GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler /* Window WatchDog */ + .word 0 /* Reserved */ + .word RTC_IRQHandler /* RTC through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ + .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ + .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ + .word 0 /* Reserved */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ + .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ + .word ADC1_IRQHandler /* ADC1 */ + .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word 0 /* Reserved */ + .word TIM3_IRQHandler /* TIM3 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word TIM14_IRQHandler /* TIM14 */ + .word 0 /* Reserved */ + .word TIM16_IRQHandler /* TIM16 */ + .word TIM17_IRQHandler /* TIM17 */ + .word I2C1_IRQHandler /* I2C1 */ + .word 0 /* Reserved */ + .word SPI1_IRQHandler /* SPI1 */ + .word 0 /* Reserved */ + .word USART1_IRQHandler /* USART1 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Debug/Core/Src/MySensors.d b/Relays/Debug/Core/Src/MySensors.d new file mode 100644 index 0000000..561f195 --- /dev/null +++ b/Relays/Debug/Core/Src/MySensors.d @@ -0,0 +1,87 @@ +Core/Src/MySensors.o: ../Core/Src/MySensors.c ../Core/Inc/main.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h \ + ../Core/Src/MySensors.h + +../Core/Inc/main.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: + +../Core/Src/MySensors.h: diff --git a/Relays/Debug/Core/Src/MySensors.o b/Relays/Debug/Core/Src/MySensors.o new file mode 100644 index 0000000..7dec922 Binary files /dev/null and b/Relays/Debug/Core/Src/MySensors.o differ diff --git a/Relays/Debug/Core/Src/MySensors.su b/Relays/Debug/Core/Src/MySensors.su new file mode 100644 index 0000000..9ccdd1f --- /dev/null +++ b/Relays/Debug/Core/Src/MySensors.su @@ -0,0 +1,15 @@ +core_cm0.h:856:34:__NVIC_SystemReset 8 static,ignoring_inline_asm +MySensors.c:35:7:send 16 static +MySensors.c:45:7:sendHeartbeat 8 static +MySensors.c:58:7:present 16 static +MySensors.c:72:6:registerNode 8 static +MySensors.c:86:6:sendLibraryInfo 8 static +MySensors.c:99:7:sendSketchInfo 24 static +MySensors.c:132:7:_processInternalCoreMessage 16 static +MySensors.c:154:6:transportProcessMessage 16 static +MySensors.c:229:6:_serialReset 8 static +MySensors.c:246:7:_serialProcess 16 static +MySensors.c:357:7:transportSend 48 static +MySensors.c:418:6:transportInitialise 16 static +MySensors.c:429:6:transportProcess 8 static +MySensors.c:436:9:transportReceive 16 static diff --git a/Relays/Debug/Core/Src/main.d b/Relays/Debug/Core/Src/main.d new file mode 100644 index 0000000..ae072b4 --- /dev/null +++ b/Relays/Debug/Core/Src/main.d @@ -0,0 +1,87 @@ +Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h \ + ../Core/Src/MySensors.h + +../Core/Inc/main.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: + +../Core/Src/MySensors.h: diff --git a/Relays/Debug/Core/Src/main.o b/Relays/Debug/Core/Src/main.o new file mode 100644 index 0000000..b6c8164 Binary files /dev/null and b/Relays/Debug/Core/Src/main.o differ diff --git a/Relays/Debug/Core/Src/main.su b/Relays/Debug/Core/Src/main.su new file mode 100644 index 0000000..b413a32 --- /dev/null +++ b/Relays/Debug/Core/Src/main.su @@ -0,0 +1,7 @@ +main.c:75:5:main 56 static +main.c:207:6:SystemClock_Config 96 static +main.c:251:13:MX_USART1_UART_Init 8 static +main.c:286:13:MX_GPIO_Init 48 static +main.c:331:6:present_node 8 static +main.c:343:6:receive 24 static +main.c:362:6:Error_Handler 8 static,ignoring_inline_asm diff --git a/Relays/Debug/Core/Src/stm32f0xx_hal_msp.d b/Relays/Debug/Core/Src/stm32f0xx_hal_msp.d new file mode 100644 index 0000000..70484a7 --- /dev/null +++ b/Relays/Debug/Core/Src/stm32f0xx_hal_msp.d @@ -0,0 +1,84 @@ +Core/Src/stm32f0xx_hal_msp.o: ../Core/Src/stm32f0xx_hal_msp.c \ + ../Core/Inc/main.h ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Core/Inc/main.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Core/Src/stm32f0xx_hal_msp.o b/Relays/Debug/Core/Src/stm32f0xx_hal_msp.o new file mode 100644 index 0000000..1e65c19 Binary files /dev/null and b/Relays/Debug/Core/Src/stm32f0xx_hal_msp.o differ diff --git a/Relays/Debug/Core/Src/stm32f0xx_hal_msp.su b/Relays/Debug/Core/Src/stm32f0xx_hal_msp.su new file mode 100644 index 0000000..f41ca37 --- /dev/null +++ b/Relays/Debug/Core/Src/stm32f0xx_hal_msp.su @@ -0,0 +1,3 @@ +stm32f0xx_hal_msp.c:64:6:HAL_MspInit 16 static +stm32f0xx_hal_msp.c:86:6:HAL_UART_MspInit 48 static +stm32f0xx_hal_msp.c:125:6:HAL_UART_MspDeInit 16 static diff --git a/Relays/Debug/Core/Src/stm32f0xx_it.d b/Relays/Debug/Core/Src/stm32f0xx_it.d new file mode 100644 index 0000000..55058e2 --- /dev/null +++ b/Relays/Debug/Core/Src/stm32f0xx_it.d @@ -0,0 +1,87 @@ +Core/Src/stm32f0xx_it.o: ../Core/Src/stm32f0xx_it.c ../Core/Inc/main.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h \ + ../Core/Inc/stm32f0xx_it.h + +../Core/Inc/main.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: + +../Core/Inc/stm32f0xx_it.h: diff --git a/Relays/Debug/Core/Src/stm32f0xx_it.o b/Relays/Debug/Core/Src/stm32f0xx_it.o new file mode 100644 index 0000000..c28cdf4 Binary files /dev/null and b/Relays/Debug/Core/Src/stm32f0xx_it.o differ diff --git a/Relays/Debug/Core/Src/stm32f0xx_it.su b/Relays/Debug/Core/Src/stm32f0xx_it.su new file mode 100644 index 0000000..bbb3b9f --- /dev/null +++ b/Relays/Debug/Core/Src/stm32f0xx_it.su @@ -0,0 +1,6 @@ +stm32f0xx_it.c:70:6:NMI_Handler 8 static +stm32f0xx_it.c:85:6:HardFault_Handler 8 static +stm32f0xx_it.c:100:6:SVC_Handler 8 static +stm32f0xx_it.c:113:6:PendSV_Handler 8 static +stm32f0xx_it.c:126:6:SysTick_Handler 8 static +stm32f0xx_it.c:147:6:USART1_IRQHandler 8 static diff --git a/Relays/Debug/Core/Src/subdir.mk b/Relays/Debug/Core/Src/subdir.mk new file mode 100644 index 0000000..3998acf --- /dev/null +++ b/Relays/Debug/Core/Src/subdir.mk @@ -0,0 +1,49 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Core/Src/MySensors.c \ +../Core/Src/main.c \ +../Core/Src/stm32f0xx_hal_msp.c \ +../Core/Src/stm32f0xx_it.c \ +../Core/Src/syscalls.c \ +../Core/Src/sysmem.c \ +../Core/Src/system_stm32f0xx.c + +C_DEPS += \ +./Core/Src/MySensors.d \ +./Core/Src/main.d \ +./Core/Src/stm32f0xx_hal_msp.d \ +./Core/Src/stm32f0xx_it.d \ +./Core/Src/syscalls.d \ +./Core/Src/sysmem.d \ +./Core/Src/system_stm32f0xx.d + +OBJS += \ +./Core/Src/MySensors.o \ +./Core/Src/main.o \ +./Core/Src/stm32f0xx_hal_msp.o \ +./Core/Src/stm32f0xx_it.o \ +./Core/Src/syscalls.o \ +./Core/Src/sysmem.o \ +./Core/Src/system_stm32f0xx.o + + +# Each subdirectory must supply rules for building sources it contributes +Core/Src/MySensors.o: ../Core/Src/MySensors.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/MySensors.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/main.o: ../Core/Src/main.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/stm32f0xx_hal_msp.o: ../Core/Src/stm32f0xx_hal_msp.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f0xx_hal_msp.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/stm32f0xx_it.o: ../Core/Src/stm32f0xx_it.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f0xx_it.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/syscalls.o: ../Core/Src/syscalls.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/syscalls.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/sysmem.o: ../Core/Src/sysmem.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/sysmem.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Core/Src/system_stm32f0xx.o: ../Core/Src/system_stm32f0xx.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/system_stm32f0xx.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Relays/Debug/Core/Src/syscalls.d b/Relays/Debug/Core/Src/syscalls.d new file mode 100644 index 0000000..8667c70 --- /dev/null +++ b/Relays/Debug/Core/Src/syscalls.d @@ -0,0 +1 @@ +Core/Src/syscalls.o: ../Core/Src/syscalls.c diff --git a/Relays/Debug/Core/Src/syscalls.o b/Relays/Debug/Core/Src/syscalls.o new file mode 100644 index 0000000..a37696a Binary files /dev/null and b/Relays/Debug/Core/Src/syscalls.o differ diff --git a/Relays/Debug/Core/Src/syscalls.su b/Relays/Debug/Core/Src/syscalls.su new file mode 100644 index 0000000..2a6e0d7 --- /dev/null +++ b/Relays/Debug/Core/Src/syscalls.su @@ -0,0 +1,18 @@ +syscalls.c:48:6:initialise_monitor_handles 8 static +syscalls.c:52:5:_getpid 8 static +syscalls.c:57:5:_kill 16 static +syscalls.c:63:6:_exit 16 static +syscalls.c:69:27:_read 32 static +syscalls.c:81:27:_write 32 static +syscalls.c:92:5:_close 16 static +syscalls.c:98:5:_fstat 16 static +syscalls.c:104:5:_isatty 16 static +syscalls.c:109:5:_lseek 24 static +syscalls.c:114:5:_open 20 static +syscalls.c:120:5:_wait 16 static +syscalls.c:126:5:_unlink 16 static +syscalls.c:132:5:_times 16 static +syscalls.c:137:5:_stat 16 static +syscalls.c:143:5:_link 16 static +syscalls.c:149:5:_fork 8 static +syscalls.c:155:5:_execve 24 static diff --git a/Relays/Debug/Core/Src/sysmem.d b/Relays/Debug/Core/Src/sysmem.d new file mode 100644 index 0000000..74fecf9 --- /dev/null +++ b/Relays/Debug/Core/Src/sysmem.d @@ -0,0 +1 @@ +Core/Src/sysmem.o: ../Core/Src/sysmem.c diff --git a/Relays/Debug/Core/Src/sysmem.o b/Relays/Debug/Core/Src/sysmem.o new file mode 100644 index 0000000..8da8fd3 Binary files /dev/null and b/Relays/Debug/Core/Src/sysmem.o differ diff --git a/Relays/Debug/Core/Src/sysmem.su b/Relays/Debug/Core/Src/sysmem.su new file mode 100644 index 0000000..4474c68 --- /dev/null +++ b/Relays/Debug/Core/Src/sysmem.su @@ -0,0 +1 @@ +sysmem.c:54:7:_sbrk 32 static diff --git a/Relays/Debug/Core/Src/system_stm32f0xx.d b/Relays/Debug/Core/Src/system_stm32f0xx.d new file mode 100644 index 0000000..a87a546 --- /dev/null +++ b/Relays/Debug/Core/Src/system_stm32f0xx.d @@ -0,0 +1,82 @@ +Core/Src/system_stm32f0xx.o: ../Core/Src/system_stm32f0xx.c \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Core/Src/system_stm32f0xx.o b/Relays/Debug/Core/Src/system_stm32f0xx.o new file mode 100644 index 0000000..ba65343 Binary files /dev/null and b/Relays/Debug/Core/Src/system_stm32f0xx.o differ diff --git a/Relays/Debug/Core/Src/system_stm32f0xx.su b/Relays/Debug/Core/Src/system_stm32f0xx.su new file mode 100644 index 0000000..2304684 --- /dev/null +++ b/Relays/Debug/Core/Src/system_stm32f0xx.su @@ -0,0 +1,2 @@ +system_stm32f0xx.c:128:6:SystemInit 8 static +system_stm32f0xx.c:174:6:SystemCoreClockUpdate 24 static diff --git a/Relays/Debug/Core/Startup/startup_stm32f030f4px.d b/Relays/Debug/Core/Startup/startup_stm32f030f4px.d new file mode 100644 index 0000000..fbe3d71 --- /dev/null +++ b/Relays/Debug/Core/Startup/startup_stm32f030f4px.d @@ -0,0 +1,2 @@ +Core/Startup/startup_stm32f030f4px.o: \ + ../Core/Startup/startup_stm32f030f4px.s diff --git a/Relays/Debug/Core/Startup/startup_stm32f030f4px.o b/Relays/Debug/Core/Startup/startup_stm32f030f4px.o new file mode 100644 index 0000000..4871b36 Binary files /dev/null and b/Relays/Debug/Core/Startup/startup_stm32f030f4px.o differ diff --git a/Relays/Debug/Core/Startup/subdir.mk b/Relays/Debug/Core/Startup/subdir.mk new file mode 100644 index 0000000..f9d3da2 --- /dev/null +++ b/Relays/Debug/Core/Startup/subdir.mk @@ -0,0 +1,19 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +S_SRCS += \ +../Core/Startup/startup_stm32f030f4px.s + +S_DEPS += \ +./Core/Startup/startup_stm32f030f4px.d + +OBJS += \ +./Core/Startup/startup_stm32f030f4px.o + + +# Each subdirectory must supply rules for building sources it contributes +Core/Startup/startup_stm32f030f4px.o: ../Core/Startup/startup_stm32f030f4px.s + arm-none-eabi-gcc -mcpu=cortex-m0 -g3 -c -x assembler-with-cpp -MMD -MP -MF"Core/Startup/startup_stm32f030f4px.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<" + diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d new file mode 100644 index 0000000..bb8a2f8 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o new file mode 100644 index 0000000..b4481bc Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su new file mode 100644 index 0000000..0deff80 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su @@ -0,0 +1,23 @@ +stm32f0xx_hal.c:141:19:HAL_Init 8 static +stm32f0xx_hal.c:165:19:HAL_DeInit 8 static +stm32f0xx_hal.c:188:13:HAL_MspInit 8 static +stm32f0xx_hal.c:199:13:HAL_MspDeInit 8 static +stm32f0xx_hal.c:222:26:HAL_InitTick 24 static +stm32f0xx_hal.c:281:13:HAL_IncTick 8 static +stm32f0xx_hal.c:292:17:HAL_GetTick 8 static +stm32f0xx_hal.c:301:10:HAL_GetTickPrio 8 static +stm32f0xx_hal.c:310:19:HAL_SetTickFreq 32 static +stm32f0xx_hal.c:342:21:HAL_GetTickFreq 8 static +stm32f0xx_hal.c:358:13:HAL_Delay 24 static +stm32f0xx_hal.c:384:13:HAL_SuspendTick 8 static +stm32f0xx_hal.c:401:13:HAL_ResumeTick 8 static +stm32f0xx_hal.c:411:10:HAL_GetHalVersion 8 static +stm32f0xx_hal.c:420:10:HAL_GetREVID 8 static +stm32f0xx_hal.c:429:10:HAL_GetDEVID 8 static +stm32f0xx_hal.c:438:10:HAL_GetUIDw0 8 static +stm32f0xx_hal.c:447:10:HAL_GetUIDw1 8 static +stm32f0xx_hal.c:456:10:HAL_GetUIDw2 8 static +stm32f0xx_hal.c:465:6:HAL_DBGMCU_EnableDBGStopMode 8 static +stm32f0xx_hal.c:474:6:HAL_DBGMCU_DisableDBGStopMode 8 static +stm32f0xx_hal.c:483:6:HAL_DBGMCU_EnableDBGStandbyMode 8 static +stm32f0xx_hal.c:492:6:HAL_DBGMCU_DisableDBGStandbyMode 8 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d new file mode 100644 index 0000000..b46f187 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o new file mode 100644 index 0000000..3b99368 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su new file mode 100644 index 0000000..9fe77bd --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su @@ -0,0 +1,21 @@ +core_cm0.h:623:22:__NVIC_EnableIRQ 16 static +core_cm0.h:659:22:__NVIC_DisableIRQ 16 static,ignoring_inline_asm +core_cm0.h:678:26:__NVIC_GetPendingIRQ 16 static +core_cm0.h:697:22:__NVIC_SetPendingIRQ 16 static +core_cm0.h:712:22:__NVIC_ClearPendingIRQ 16 static +core_cm0.h:730:22:__NVIC_SetPriority 24 static +core_cm0.h:754:26:__NVIC_GetPriority 16 static +core_cm0.h:856:34:__NVIC_SystemReset 8 static,ignoring_inline_asm +core_cm0.h:920:26:SysTick_Config 16 static +stm32f0xx_hal_cortex.c:136:6:HAL_NVIC_SetPriority 24 static +stm32f0xx_hal_cortex.c:152:6:HAL_NVIC_EnableIRQ 16 static +stm32f0xx_hal_cortex.c:168:6:HAL_NVIC_DisableIRQ 16 static +stm32f0xx_hal_cortex.c:181:6:HAL_NVIC_SystemReset 8 static +stm32f0xx_hal_cortex.c:194:10:HAL_SYSTICK_Config 16 static +stm32f0xx_hal_cortex.c:226:10:HAL_NVIC_GetPriority 16 static +stm32f0xx_hal_cortex.c:239:6:HAL_NVIC_SetPendingIRQ 16 static +stm32f0xx_hal_cortex.c:257:10:HAL_NVIC_GetPendingIRQ 16 static +stm32f0xx_hal_cortex.c:273:6:HAL_NVIC_ClearPendingIRQ 16 static +stm32f0xx_hal_cortex.c:290:6:HAL_SYSTICK_CLKSourceConfig 16 static +stm32f0xx_hal_cortex.c:308:6:HAL_SYSTICK_IRQHandler 8 static +stm32f0xx_hal_cortex.c:317:13:HAL_SYSTICK_Callback 8 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d new file mode 100644 index 0000000..8681e57 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o new file mode 100644 index 0000000..730e4ee Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su new file mode 100644 index 0000000..c1baa6b --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su @@ -0,0 +1,14 @@ +stm32f0xx_hal_dma.c:138:19:HAL_DMA_Init 24 static +stm32f0xx_hal_dma.c:200:19:HAL_DMA_DeInit 16 static +stm32f0xx_hal_dma.c:282:19:HAL_DMA_Start 32 static +stm32f0xx_hal_dma.c:329:19:HAL_DMA_Start_IT 32 static +stm32f0xx_hal_dma.c:385:19:HAL_DMA_Abort 16 static +stm32f0xx_hal_dma.c:423:19:HAL_DMA_Abort_IT 24 static +stm32f0xx_hal_dma.c:469:19:HAL_DMA_PollForTransfer 32 static +stm32f0xx_hal_dma.c:570:6:HAL_DMA_IRQHandler 24 static +stm32f0xx_hal_dma.c:662:19:HAL_DMA_RegisterCallback 32 static +stm32f0xx_hal_dma.c:713:19:HAL_DMA_UnRegisterCallback 24 static +stm32f0xx_hal_dma.c:789:22:HAL_DMA_GetState 16 static +stm32f0xx_hal_dma.c:800:10:HAL_DMA_GetError 16 static +stm32f0xx_hal_dma.c:826:13:DMA_SetConfig 24 static +stm32f0xx_hal_dma.c:860:13:DMA_CalcBaseAndBitshift 16 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d new file mode 100644 index 0000000..b981774 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o new file mode 100644 index 0000000..4af981d Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su new file mode 100644 index 0000000..1329b3c --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su @@ -0,0 +1,9 @@ +stm32f0xx_hal_exti.c:143:19:HAL_EXTI_SetConfigLine 32 static +stm32f0xx_hal_exti.c:238:19:HAL_EXTI_GetConfigLine 32 static +stm32f0xx_hal_exti.c:327:19:HAL_EXTI_ClearConfigLine 32 static +stm32f0xx_hal_exti.c:380:19:HAL_EXTI_RegisterCallback 32 static +stm32f0xx_hal_exti.c:405:19:HAL_EXTI_GetHandle 16 static +stm32f0xx_hal_exti.c:445:6:HAL_EXTI_IRQHandler 24 static +stm32f0xx_hal_exti.c:477:10:HAL_EXTI_GetPending 32 static +stm32f0xx_hal_exti.c:506:6:HAL_EXTI_ClearPending 24 static +stm32f0xx_hal_exti.c:527:6:HAL_EXTI_GenerateSWI 24 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d new file mode 100644 index 0000000..fd3cd8e --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o new file mode 100644 index 0000000..ab5318d Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su new file mode 100644 index 0000000..c7142e1 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su @@ -0,0 +1,14 @@ +stm32f0xx_hal_flash.c:167:19:HAL_FLASH_Program 48 static +stm32f0xx_hal_flash.c:239:19:HAL_FLASH_Program_IT 40 static +stm32f0xx_hal_flash.c:285:6:HAL_FLASH_IRQHandler 24 static +stm32f0xx_hal_flash.c:428:13:HAL_FLASH_EndOfOperationCallback 16 static +stm32f0xx_hal_flash.c:446:13:HAL_FLASH_OperationErrorCallback 16 static +stm32f0xx_hal_flash.c:479:19:HAL_FLASH_Unlock 16 static +stm32f0xx_hal_flash.c:503:19:HAL_FLASH_Lock 8 static +stm32f0xx_hal_flash.c:515:19:HAL_FLASH_OB_Unlock 8 static +stm32f0xx_hal_flash.c:535:19:HAL_FLASH_OB_Lock 8 static +stm32f0xx_hal_flash.c:548:19:HAL_FLASH_OB_Launch 8 static +stm32f0xx_hal_flash.c:580:10:HAL_FLASH_GetError 8 static +stm32f0xx_hal_flash.c:603:13:FLASH_Program_HalfWord 16 static +stm32f0xx_hal_flash.c:620:19:FLASH_WaitForLastOperation 24 static +stm32f0xx_hal_flash.c:663:13:FLASH_SetErrorCode 16 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d new file mode 100644 index 0000000..811d857 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o new file mode 100644 index 0000000..aba13a6 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su new file mode 100644 index 0000000..8e5b1da --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su @@ -0,0 +1,16 @@ +stm32f0xx_hal_flash_ex.c:159:19:HAL_FLASHEx_Erase 32 static +stm32f0xx_hal_flash_ex.c:240:19:HAL_FLASHEx_Erase_IT 24 static +stm32f0xx_hal_flash_ex.c:313:19:HAL_FLASHEx_OBErase 24 static +stm32f0xx_hal_flash_ex.c:362:19:HAL_FLASHEx_OBProgram 32 static +stm32f0xx_hal_flash_ex.c:443:6:HAL_FLASHEx_OBGetConfig 16 static +stm32f0xx_hal_flash_ex.c:465:10:HAL_FLASHEx_OBGetUserData 24 static +stm32f0xx_hal_flash_ex.c:500:13:FLASH_MassErase 8 static +stm32f0xx_hal_flash_ex.c:521:26:FLASH_OB_EnableWRP 32 static +stm32f0xx_hal_flash_ex.c:637:26:FLASH_OB_DisableWRP 32 static +stm32f0xx_hal_flash_ex.c:751:26:FLASH_OB_RDP_LevelConfig 32 static +stm32f0xx_hal_flash_ex.c:802:26:FLASH_OB_UserConfig 32 static +stm32f0xx_hal_flash_ex.c:857:26:FLASH_OB_ProgramData 32 static +stm32f0xx_hal_flash_ex.c:890:17:FLASH_OB_GetWRP 8 static +stm32f0xx_hal_flash_ex.c:904:17:FLASH_OB_GetRDP 16 static +stm32f0xx_hal_flash_ex.c:931:16:FLASH_OB_GetUser 8 static +stm32f0xx_hal_flash_ex.c:960:6:FLASH_PageErase 16 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d new file mode 100644 index 0000000..a77db9d --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o new file mode 100644 index 0000000..1df8eef Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su new file mode 100644 index 0000000..457c393 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su @@ -0,0 +1,8 @@ +stm32f0xx_hal_gpio.c:177:6:HAL_GPIO_Init 32 static +stm32f0xx_hal_gpio.c:302:6:HAL_GPIO_DeInit 32 static +stm32f0xx_hal_gpio.c:385:15:HAL_GPIO_ReadPin 24 static +stm32f0xx_hal_gpio.c:418:6:HAL_GPIO_WritePin 16 static +stm32f0xx_hal_gpio.c:440:6:HAL_GPIO_TogglePin 24 static +stm32f0xx_hal_gpio.c:465:19:HAL_GPIO_LockPin 24 static +stm32f0xx_hal_gpio.c:500:6:HAL_GPIO_EXTI_IRQHandler 16 static +stm32f0xx_hal_gpio.c:515:13:HAL_GPIO_EXTI_Callback 16 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d new file mode 100644 index 0000000..d4fd103 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o new file mode 100644 index 0000000..6ea8fc1 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su new file mode 100644 index 0000000..f9394d0 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su @@ -0,0 +1,79 @@ +stm32f0xx_hal_i2c.c:476:19:HAL_I2C_Init 16 static +stm32f0xx_hal_i2c.c:585:19:HAL_I2C_DeInit 16 static +stm32f0xx_hal_i2c.c:631:13:HAL_I2C_MspInit 16 static +stm32f0xx_hal_i2c.c:647:13:HAL_I2C_MspDeInit 16 static +stm32f0xx_hal_i2c.c:1068:19:HAL_I2C_Master_Transmit 48 static +stm32f0xx_hal_i2c.c:1183:19:HAL_I2C_Master_Receive 48 static +stm32f0xx_hal_i2c.c:1297:19:HAL_I2C_Slave_Transmit 40 static +stm32f0xx_hal_i2c.c:1434:19:HAL_I2C_Slave_Receive 40 static +stm32f0xx_hal_i2c.c:1560:19:HAL_I2C_Master_Transmit_IT 48 static +stm32f0xx_hal_i2c.c:1630:19:HAL_I2C_Master_Receive_IT 48 static +stm32f0xx_hal_i2c.c:1697:19:HAL_I2C_Slave_Transmit_IT 24 static +stm32f0xx_hal_i2c.c:1746:19:HAL_I2C_Slave_Receive_IT 24 static +stm32f0xx_hal_i2c.c:1797:19:HAL_I2C_Master_Transmit_DMA 48 static +stm32f0xx_hal_i2c.c:1941:19:HAL_I2C_Master_Receive_DMA 48 static +stm32f0xx_hal_i2c.c:2083:19:HAL_I2C_Slave_Transmit_DMA 40 static +stm32f0xx_hal_i2c.c:2186:19:HAL_I2C_Slave_Receive_DMA 40 static +stm32f0xx_hal_i2c.c:2293:19:HAL_I2C_Mem_Write 48 static +stm32f0xx_hal_i2c.c:2428:19:HAL_I2C_Mem_Read 48 static +stm32f0xx_hal_i2c.c:2561:19:HAL_I2C_Mem_Write_IT 48 static +stm32f0xx_hal_i2c.c:2653:19:HAL_I2C_Mem_Read_IT 48 static +stm32f0xx_hal_i2c.c:2744:19:HAL_I2C_Mem_Write_DMA 56 static +stm32f0xx_hal_i2c.c:2889:19:HAL_I2C_Mem_Read_DMA 56 static +stm32f0xx_hal_i2c.c:3031:19:HAL_I2C_IsDeviceReady 48 static +stm32f0xx_hal_i2c.c:3172:19:HAL_I2C_Master_Seq_Transmit_IT 48 static +stm32f0xx_hal_i2c.c:3257:19:HAL_I2C_Master_Seq_Transmit_DMA 56 static +stm32f0xx_hal_i2c.c:3420:19:HAL_I2C_Master_Seq_Receive_IT 48 static +stm32f0xx_hal_i2c.c:3505:19:HAL_I2C_Master_Seq_Receive_DMA 56 static +stm32f0xx_hal_i2c.c:3666:19:HAL_I2C_Slave_Seq_Transmit_IT 24 static +stm32f0xx_hal_i2c.c:3762:19:HAL_I2C_Slave_Seq_Transmit_DMA 40 static +stm32f0xx_hal_i2c.c:3942:19:HAL_I2C_Slave_Seq_Receive_IT 24 static +stm32f0xx_hal_i2c.c:4038:19:HAL_I2C_Slave_Seq_Receive_DMA 40 static +stm32f0xx_hal_i2c.c:4214:19:HAL_I2C_EnableListen_IT 16 static +stm32f0xx_hal_i2c.c:4238:19:HAL_I2C_DisableListen_IT 24 static +stm32f0xx_hal_i2c.c:4271:19:HAL_I2C_Master_Abort_IT 24 static +stm32f0xx_hal_i2c.c:4333:6:HAL_I2C_EV_IRQHandler 24 static +stm32f0xx_hal_i2c.c:4352:6:HAL_I2C_ER_IRQHandler 32 static +stm32f0xx_hal_i2c.c:4401:13:HAL_I2C_MasterTxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4417:13:HAL_I2C_MasterRxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4432:13:HAL_I2C_SlaveTxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4448:13:HAL_I2C_SlaveRxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4466:13:HAL_I2C_AddrCallback 16 static +stm32f0xx_hal_i2c.c:4484:13:HAL_I2C_ListenCpltCallback 16 static +stm32f0xx_hal_i2c.c:4500:13:HAL_I2C_MemTxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4516:13:HAL_I2C_MemRxCpltCallback 16 static +stm32f0xx_hal_i2c.c:4532:13:HAL_I2C_ErrorCallback 16 static +stm32f0xx_hal_i2c.c:4548:13:HAL_I2C_AbortCpltCallback 16 static +stm32f0xx_hal_i2c.c:4583:22:HAL_I2C_GetState 16 static +stm32f0xx_hal_i2c.c:4595:21:HAL_I2C_GetMode 16 static +stm32f0xx_hal_i2c.c:4606:10:HAL_I2C_GetError 16 static +stm32f0xx_hal_i2c.c:4631:26:I2C_Master_ISR_IT 48 static +stm32f0xx_hal_i2c.c:4768:26:I2C_Slave_ISR_IT 32 static +stm32f0xx_hal_i2c.c:4903:26:I2C_Master_ISR_DMA 48 static +stm32f0xx_hal_i2c.c:5038:26:I2C_Slave_ISR_DMA 40 static +stm32f0xx_hal_i2c.c:5178:26:I2C_RequestMemoryWrite 40 static +stm32f0xx_hal_i2c.c:5232:26:I2C_RequestMemoryRead 40 static +stm32f0xx_hal_i2c.c:5280:13:I2C_ITAddrCplt 32 static +stm32f0xx_hal_i2c.c:5375:13:I2C_ITMasterSeqCplt 16 static +stm32f0xx_hal_i2c.c:5428:13:I2C_ITSlaveSeqCplt 24 static +stm32f0xx_hal_i2c.c:5502:13:I2C_ITMasterCplt 32 static +stm32f0xx_hal_i2c.c:5645:13:I2C_ITSlaveCplt 32 static +stm32f0xx_hal_i2c.c:5804:13:I2C_ITListenCplt 16 static +stm32f0xx_hal_i2c.c:5855:13:I2C_ITError 24 static +stm32f0xx_hal_i2c.c:5967:13:I2C_TreatErrorCallback 16 static +stm32f0xx_hal_i2c.c:6005:13:I2C_Flush_TXDR 16 static +stm32f0xx_hal_i2c.c:6026:13:I2C_DMAMasterTransmitCplt 24 static +stm32f0xx_hal_i2c.c:6074:13:I2C_DMASlaveTransmitCplt 24 static +stm32f0xx_hal_i2c.c:6101:13:I2C_DMAMasterReceiveCplt 24 static +stm32f0xx_hal_i2c.c:6149:13:I2C_DMASlaveReceiveCplt 24 static +stm32f0xx_hal_i2c.c:6176:13:I2C_DMAError 24 static +stm32f0xx_hal_i2c.c:6193:13:I2C_DMAAbort 24 static +stm32f0xx_hal_i2c.c:6220:26:I2C_WaitOnFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6251:26:I2C_WaitOnTXISFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6288:26:I2C_WaitOnSTOPFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6322:26:I2C_WaitOnRXNEFlagUntilTimeout 24 static +stm32f0xx_hal_i2c.c:6385:26:I2C_IsAcknowledgeFailed 24 static +stm32f0xx_hal_i2c.c:6453:13:I2C_TransferConfig 32 static +stm32f0xx_hal_i2c.c:6476:13:I2C_Enable_IRQ 24 static +stm32f0xx_hal_i2c.c:6547:13:I2C_Disable_IRQ 24 static +stm32f0xx_hal_i2c.c:6610:13:I2C_ConvertOtherXferOptions 16 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d new file mode 100644 index 0000000..bd09ce9 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o new file mode 100644 index 0000000..c3e12d0 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su new file mode 100644 index 0000000..19b976d --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su @@ -0,0 +1,4 @@ +stm32f0xx_hal_i2c_ex.c:97:19:HAL_I2CEx_ConfigAnalogFilter 16 static +stm32f0xx_hal_i2c_ex.c:141:19:HAL_I2CEx_ConfigDigitalFilter 24 static +stm32f0xx_hal_i2c_ex.c:279:6:HAL_I2CEx_EnableFastModePlus 24 static +stm32f0xx_hal_i2c_ex.c:304:6:HAL_I2CEx_DisableFastModePlus 24 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d new file mode 100644 index 0000000..2bb51e8 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o new file mode 100644 index 0000000..681b458 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su new file mode 100644 index 0000000..6bc0263 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su @@ -0,0 +1,12 @@ +stm32f0xx_hal_pwr.c:75:6:HAL_PWR_DeInit 8 static +stm32f0xx_hal_pwr.c:88:6:HAL_PWR_EnableBkUpAccess 8 static +stm32f0xx_hal_pwr.c:100:6:HAL_PWR_DisableBkUpAccess 8 static +stm32f0xx_hal_pwr.c:231:6:HAL_PWR_EnableWakeUpPin 16 static +stm32f0xx_hal_pwr.c:246:6:HAL_PWR_DisableWakeUpPin 16 static +stm32f0xx_hal_pwr.c:269:6:HAL_PWR_EnterSLEEPMode 16 static,ignoring_inline_asm +stm32f0xx_hal_pwr.c:312:6:HAL_PWR_EnterSTOPMode 24 static,ignoring_inline_asm +stm32f0xx_hal_pwr.c:367:6:HAL_PWR_EnterSTANDBYMode 8 static,ignoring_inline_asm +stm32f0xx_hal_pwr.c:391:6:HAL_PWR_EnableSleepOnExit 8 static +stm32f0xx_hal_pwr.c:404:6:HAL_PWR_DisableSleepOnExit 8 static +stm32f0xx_hal_pwr.c:418:6:HAL_PWR_EnableSEVOnPend 8 static +stm32f0xx_hal_pwr.c:431:6:HAL_PWR_DisableSEVOnPend 8 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d new file mode 100644 index 0000000..3e0cddd --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o new file mode 100644 index 0000000..8f6a552 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.su new file mode 100644 index 0000000..e69de29 diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d new file mode 100644 index 0000000..377d1e1 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o new file mode 100644 index 0000000..e7f6c26 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su new file mode 100644 index 0000000..b42db45 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su @@ -0,0 +1,13 @@ +stm32f0xx_hal_rcc.c:210:19:HAL_RCC_DeInit 16 static +stm32f0xx_hal_rcc.c:300:19:HAL_RCC_OscConfig 40 static +stm32f0xx_hal_rcc.c:779:19:HAL_RCC_ClockConfig 24 static +stm32f0xx_hal_rcc.c:1018:6:HAL_RCC_MCOConfig 48 static +stm32f0xx_hal_rcc.c:1052:6:HAL_RCC_EnableCSS 8 static +stm32f0xx_hal_rcc.c:1061:6:HAL_RCC_DisableCSS 8 static +stm32f0xx_hal_rcc.c:1097:10:HAL_RCC_GetSysClockFreq 72 static +stm32f0xx_hal_rcc.c:1172:10:HAL_RCC_GetHCLKFreq 8 static +stm32f0xx_hal_rcc.c:1183:10:HAL_RCC_GetPCLK1Freq 8 static +stm32f0xx_hal_rcc.c:1196:6:HAL_RCC_GetOscConfig 16 static +stm32f0xx_hal_rcc.c:1298:6:HAL_RCC_GetClockConfig 16 static +stm32f0xx_hal_rcc.c:1324:6:HAL_RCC_NMI_IRQHandler 8 static +stm32f0xx_hal_rcc.c:1341:13:HAL_RCC_CSSCallback 8 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d new file mode 100644 index 0000000..d96a1dc --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o new file mode 100644 index 0000000..cada7dc Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su new file mode 100644 index 0000000..e199abe --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su @@ -0,0 +1,3 @@ +stm32f0xx_hal_rcc_ex.c:104:19:HAL_RCCEx_PeriphCLKConfig 32 static +stm32f0xx_hal_rcc_ex.c:270:6:HAL_RCCEx_GetPeriphCLKConfig 16 static +stm32f0xx_hal_rcc_ex.c:370:10:HAL_RCCEx_GetPeriphCLKFreq 24 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d new file mode 100644 index 0000000..b7d13be --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o new file mode 100644 index 0000000..544dbde Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.su new file mode 100644 index 0000000..e69de29 diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d new file mode 100644 index 0000000..020a08b --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o new file mode 100644 index 0000000..dec60a2 Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.su new file mode 100644 index 0000000..e69de29 diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.d new file mode 100644 index 0000000..7a6c70f --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o new file mode 100644 index 0000000..ed3cbfa Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.su new file mode 100644 index 0000000..2dfc704 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.su @@ -0,0 +1,64 @@ +stm32f0xx_hal_uart.c:288:19:HAL_UART_Init 16 static +stm32f0xx_hal_uart.c:377:19:HAL_HalfDuplex_Init 16 static +stm32f0xx_hal_uart.c:575:19:HAL_MultiProcessor_Init 24 static +stm32f0xx_hal_uart.c:665:19:HAL_UART_DeInit 16 static +stm32f0xx_hal_uart.c:711:13:HAL_UART_MspInit 16 static +stm32f0xx_hal_uart.c:726:13:HAL_UART_MspDeInit 16 static +stm32f0xx_hal_uart.c:1145:19:HAL_UART_Transmit 48 static +stm32f0xx_hal_uart.c:1246:19:HAL_UART_Receive 48 static +stm32f0xx_hal_uart.c:1348:19:HAL_UART_Transmit_IT 24 static +stm32f0xx_hal_uart.c:1417:19:HAL_UART_Receive_IT 24 static +stm32f0xx_hal_uart.c:1473:19:HAL_UART_Transmit_DMA 24 static +stm32f0xx_hal_uart.c:1565:19:HAL_UART_Receive_DMA 24 static +stm32f0xx_hal_uart.c:1611:19:HAL_UART_DMAPause 24 static +stm32f0xx_hal_uart.c:1645:19:HAL_UART_DMAResume 16 static +stm32f0xx_hal_uart.c:1677:19:HAL_UART_DMAStop 24 static +stm32f0xx_hal_uart.c:1752:19:HAL_UART_Abort 16 static +stm32f0xx_hal_uart.c:1847:19:HAL_UART_AbortTransmit 16 static +stm32f0xx_hal_uart.c:1899:19:HAL_UART_AbortReceive 16 static +stm32f0xx_hal_uart.c:1966:19:HAL_UART_Abort_IT 24 static +stm32f0xx_hal_uart.c:2112:19:HAL_UART_AbortTransmit_IT 16 static +stm32f0xx_hal_uart.c:2196:19:HAL_UART_AbortReceive_IT 16 static +stm32f0xx_hal_uart.c:2288:6:HAL_UART_IRQHandler 40 static +stm32f0xx_hal_uart.c:2581:13:HAL_UART_TxCpltCallback 16 static +stm32f0xx_hal_uart.c:2596:13:HAL_UART_TxHalfCpltCallback 16 static +stm32f0xx_hal_uart.c:2611:13:HAL_UART_RxCpltCallback 16 static +stm32f0xx_hal_uart.c:2626:13:HAL_UART_RxHalfCpltCallback 16 static +stm32f0xx_hal_uart.c:2641:13:HAL_UART_ErrorCallback 16 static +stm32f0xx_hal_uart.c:2656:13:HAL_UART_AbortCpltCallback 16 static +stm32f0xx_hal_uart.c:2671:13:HAL_UART_AbortTransmitCpltCallback 16 static +stm32f0xx_hal_uart.c:2686:13:HAL_UART_AbortReceiveCpltCallback 16 static +stm32f0xx_hal_uart.c:2703:13:HAL_UARTEx_RxEventCallback 16 static +stm32f0xx_hal_uart.c:2751:6:HAL_UART_ReceiverTimeout_Config 16 static +stm32f0xx_hal_uart.c:2763:19:HAL_UART_EnableReceiverTimeout 16 static +stm32f0xx_hal_uart.c:2794:19:HAL_UART_DisableReceiverTimeout 16 static +stm32f0xx_hal_uart.c:2825:19:HAL_MultiProcessor_EnableMuteMode 16 static +stm32f0xx_hal_uart.c:2845:19:HAL_MultiProcessor_DisableMuteMode 16 static +stm32f0xx_hal_uart.c:2865:6:HAL_MultiProcessor_EnterMuteMode 16 static +stm32f0xx_hal_uart.c:2875:19:HAL_HalfDuplex_EnableTransmitter 16 static +stm32f0xx_hal_uart.c:2898:19:HAL_HalfDuplex_EnableReceiver 16 static +stm32f0xx_hal_uart.c:2969:23:HAL_UART_GetState 24 static +stm32f0xx_hal_uart.c:2985:10:HAL_UART_GetError 16 static +stm32f0xx_hal_uart.c:3031:19:UART_SetConfig 40 static +stm32f0xx_hal_uart.c:3169:6:UART_AdvFeatureConfig 16 static +stm32f0xx_hal_uart.c:3243:19:UART_CheckIdleState 32 static +stm32f0xx_hal_uart.c:3294:19:UART_WaitOnFlagUntilTimeout 24 static +stm32f0xx_hal_uart.c:3356:19:UART_Start_Receive_IT 24 static +stm32f0xx_hal_uart.c:3400:19:UART_Start_Receive_DMA 24 static +stm32f0xx_hal_uart.c:3457:13:UART_EndTxTransfer 16 static +stm32f0xx_hal_uart.c:3472:13:UART_EndRxTransfer 16 static +stm32f0xx_hal_uart.c:3498:13:UART_DMATransmitCplt 24 static +stm32f0xx_hal_uart.c:3532:13:UART_DMATxHalfCplt 24 static +stm32f0xx_hal_uart.c:3550:13:UART_DMAReceiveCplt 24 static +stm32f0xx_hal_uart.c:3607:13:UART_DMARxHalfCplt 24 static +stm32f0xx_hal_uart.c:3641:13:UART_DMAError 32 static +stm32f0xx_hal_uart.c:3681:13:UART_DMAAbortOnError 24 static +stm32f0xx_hal_uart.c:3704:13:UART_DMATxAbortCallback 24 static +stm32f0xx_hal_uart.c:3754:13:UART_DMARxAbortCallback 24 static +stm32f0xx_hal_uart.c:3806:13:UART_DMATxOnlyAbortCallback 24 static +stm32f0xx_hal_uart.c:3834:13:UART_DMARxOnlyAbortCallback 24 static +stm32f0xx_hal_uart.c:3867:13:UART_TxISR_8BIT 16 static +stm32f0xx_hal_uart.c:3896:13:UART_TxISR_16BIT 24 static +stm32f0xx_hal_uart.c:3928:13:UART_EndTransmit_IT 16 static +stm32f0xx_hal_uart.c:3953:13:UART_RxISR_8BIT 24 static +stm32f0xx_hal_uart.c:4023:13:UART_RxISR_16BIT 24 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.d b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.d new file mode 100644 index 0000000..d6799c8 --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.d @@ -0,0 +1,83 @@ +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o: \ + ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \ + ../Core/Inc/stm32f0xx_hal_conf.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \ + ../Drivers/CMSIS/Include/core_cm0.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h \ + ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h: + +../Core/Inc/stm32f0xx_hal_conf.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h: + +../Drivers/CMSIS/Include/core_cm0.h: + +../Drivers/CMSIS/Include/cmsis_version.h: + +../Drivers/CMSIS/Include/cmsis_compiler.h: + +../Drivers/CMSIS/Include/cmsis_gcc.h: + +../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h: + +../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h: diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o new file mode 100644 index 0000000..df7166d Binary files /dev/null and b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o differ diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.su b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.su new file mode 100644 index 0000000..0b09cff --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.su @@ -0,0 +1,5 @@ +stm32f0xx_hal_uart_ex.c:150:19:HAL_RS485Ex_Init 32 static +stm32f0xx_hal_uart_ex.c:340:19:HAL_MultiProcessorEx_AddressLength_Set 16 static +stm32f0xx_hal_uart_ex.c:487:19:HAL_UARTEx_ReceiveToIdle 40 static +stm32f0xx_hal_uart_ex.c:625:19:HAL_UARTEx_ReceiveToIdle_IT 40 static +stm32f0xx_hal_uart_ex.c:701:19:HAL_UARTEx_ReceiveToIdle_DMA 40 static diff --git a/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk new file mode 100644 index 0000000..df008dc --- /dev/null +++ b/Relays/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk @@ -0,0 +1,99 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c \ +../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c + +C_DEPS += \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.d \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.d + +OBJS += \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o \ +./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + + +# Each subdirectory must supply rules for building sources it contributes +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" +Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c + arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I/home/jof/STM32CubeIDE/workspace_1.5.0/Relays -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" + diff --git a/Relays/Debug/Relays.bin b/Relays/Debug/Relays.bin new file mode 100755 index 0000000..e85e111 Binary files /dev/null and b/Relays/Debug/Relays.bin differ diff --git a/Relays/Debug/Relays.elf b/Relays/Debug/Relays.elf new file mode 100755 index 0000000..123e76f Binary files /dev/null and b/Relays/Debug/Relays.elf differ diff --git a/Relays/Debug/Relays.list b/Relays/Debug/Relays.list new file mode 100644 index 0000000..1f6d375 --- /dev/null +++ b/Relays/Debug/Relays.list @@ -0,0 +1,8343 @@ + +Relays.elf: file format elf32-littlearm + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .isr_vector 000000c0 08000000 08000000 00010000 2**0 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 1 .text 00002f88 080000c0 080000c0 000100c0 2**2 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 2 .rodata 000000a4 08003048 08003048 00013048 2**2 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 3 .ARM.extab 00000000 080030ec 080030ec 00020074 2**0 + CONTENTS + 4 .ARM 00000000 080030ec 080030ec 00020074 2**0 + CONTENTS + 5 .preinit_array 00000000 080030ec 080030ec 00020074 2**0 + CONTENTS, ALLOC, LOAD, DATA + 6 .init_array 00000004 080030ec 080030ec 000130ec 2**2 + CONTENTS, ALLOC, LOAD, DATA + 7 .fini_array 00000004 080030f0 080030f0 000130f0 2**2 + CONTENTS, ALLOC, LOAD, DATA + 8 .data 00000074 20000000 080030f4 00020000 2**2 + CONTENTS, ALLOC, LOAD, DATA + 9 .bss 00000140 20000074 08003168 00020074 2**2 + ALLOC + 10 ._user_heap_stack 00000604 200001b4 08003168 000201b4 2**0 + ALLOC + 11 .ARM.attributes 00000028 00000000 00000000 00020074 2**0 + CONTENTS, READONLY + 12 .debug_info 0000833f 00000000 00000000 0002009c 2**0 + CONTENTS, READONLY, DEBUGGING + 13 .debug_abbrev 000017fb 00000000 00000000 000283db 2**0 + CONTENTS, READONLY, DEBUGGING + 14 .debug_aranges 00000678 00000000 00000000 00029bd8 2**3 + CONTENTS, READONLY, DEBUGGING + 15 .debug_ranges 000005e0 00000000 00000000 0002a250 2**3 + CONTENTS, READONLY, DEBUGGING + 16 .debug_macro 0000f717 00000000 00000000 0002a830 2**0 + CONTENTS, READONLY, DEBUGGING + 17 .debug_line 000066f3 00000000 00000000 00039f47 2**0 + CONTENTS, READONLY, DEBUGGING + 18 .debug_str 0005b783 00000000 00000000 0004063a 2**0 + CONTENTS, READONLY, DEBUGGING + 19 .comment 0000007b 00000000 00000000 0009bdbd 2**0 + CONTENTS, READONLY + 20 .debug_frame 00001750 00000000 00000000 0009be38 2**2 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +080000c0 <__do_global_dtors_aux>: + 80000c0: b510 push {r4, lr} + 80000c2: 4c06 ldr r4, [pc, #24] ; (80000dc <__do_global_dtors_aux+0x1c>) + 80000c4: 7823 ldrb r3, [r4, #0] + 80000c6: 2b00 cmp r3, #0 + 80000c8: d107 bne.n 80000da <__do_global_dtors_aux+0x1a> + 80000ca: 4b05 ldr r3, [pc, #20] ; (80000e0 <__do_global_dtors_aux+0x20>) + 80000cc: 2b00 cmp r3, #0 + 80000ce: d002 beq.n 80000d6 <__do_global_dtors_aux+0x16> + 80000d0: 4804 ldr r0, [pc, #16] ; (80000e4 <__do_global_dtors_aux+0x24>) + 80000d2: e000 b.n 80000d6 <__do_global_dtors_aux+0x16> + 80000d4: bf00 nop + 80000d6: 2301 movs r3, #1 + 80000d8: 7023 strb r3, [r4, #0] + 80000da: bd10 pop {r4, pc} + 80000dc: 20000074 .word 0x20000074 + 80000e0: 00000000 .word 0x00000000 + 80000e4: 08003030 .word 0x08003030 + +080000e8 : + 80000e8: 4b04 ldr r3, [pc, #16] ; (80000fc ) + 80000ea: b510 push {r4, lr} + 80000ec: 2b00 cmp r3, #0 + 80000ee: d003 beq.n 80000f8 + 80000f0: 4903 ldr r1, [pc, #12] ; (8000100 ) + 80000f2: 4804 ldr r0, [pc, #16] ; (8000104 ) + 80000f4: e000 b.n 80000f8 + 80000f6: bf00 nop + 80000f8: bd10 pop {r4, pc} + 80000fa: 46c0 nop ; (mov r8, r8) + 80000fc: 00000000 .word 0x00000000 + 8000100: 20000078 .word 0x20000078 + 8000104: 08003030 .word 0x08003030 + +08000108 : + 8000108: 2300 movs r3, #0 + 800010a: 5cc2 ldrb r2, [r0, r3] + 800010c: 3301 adds r3, #1 + 800010e: 2a00 cmp r2, #0 + 8000110: d1fb bne.n 800010a + 8000112: 1e58 subs r0, r3, #1 + 8000114: 4770 bx lr + ... + +08000118 <__udivsi3>: + 8000118: 2200 movs r2, #0 + 800011a: 0843 lsrs r3, r0, #1 + 800011c: 428b cmp r3, r1 + 800011e: d374 bcc.n 800020a <__udivsi3+0xf2> + 8000120: 0903 lsrs r3, r0, #4 + 8000122: 428b cmp r3, r1 + 8000124: d35f bcc.n 80001e6 <__udivsi3+0xce> + 8000126: 0a03 lsrs r3, r0, #8 + 8000128: 428b cmp r3, r1 + 800012a: d344 bcc.n 80001b6 <__udivsi3+0x9e> + 800012c: 0b03 lsrs r3, r0, #12 + 800012e: 428b cmp r3, r1 + 8000130: d328 bcc.n 8000184 <__udivsi3+0x6c> + 8000132: 0c03 lsrs r3, r0, #16 + 8000134: 428b cmp r3, r1 + 8000136: d30d bcc.n 8000154 <__udivsi3+0x3c> + 8000138: 22ff movs r2, #255 ; 0xff + 800013a: 0209 lsls r1, r1, #8 + 800013c: ba12 rev r2, r2 + 800013e: 0c03 lsrs r3, r0, #16 + 8000140: 428b cmp r3, r1 + 8000142: d302 bcc.n 800014a <__udivsi3+0x32> + 8000144: 1212 asrs r2, r2, #8 + 8000146: 0209 lsls r1, r1, #8 + 8000148: d065 beq.n 8000216 <__udivsi3+0xfe> + 800014a: 0b03 lsrs r3, r0, #12 + 800014c: 428b cmp r3, r1 + 800014e: d319 bcc.n 8000184 <__udivsi3+0x6c> + 8000150: e000 b.n 8000154 <__udivsi3+0x3c> + 8000152: 0a09 lsrs r1, r1, #8 + 8000154: 0bc3 lsrs r3, r0, #15 + 8000156: 428b cmp r3, r1 + 8000158: d301 bcc.n 800015e <__udivsi3+0x46> + 800015a: 03cb lsls r3, r1, #15 + 800015c: 1ac0 subs r0, r0, r3 + 800015e: 4152 adcs r2, r2 + 8000160: 0b83 lsrs r3, r0, #14 + 8000162: 428b cmp r3, r1 + 8000164: d301 bcc.n 800016a <__udivsi3+0x52> + 8000166: 038b lsls r3, r1, #14 + 8000168: 1ac0 subs r0, r0, r3 + 800016a: 4152 adcs r2, r2 + 800016c: 0b43 lsrs r3, r0, #13 + 800016e: 428b cmp r3, r1 + 8000170: d301 bcc.n 8000176 <__udivsi3+0x5e> + 8000172: 034b lsls r3, r1, #13 + 8000174: 1ac0 subs r0, r0, r3 + 8000176: 4152 adcs r2, r2 + 8000178: 0b03 lsrs r3, r0, #12 + 800017a: 428b cmp r3, r1 + 800017c: d301 bcc.n 8000182 <__udivsi3+0x6a> + 800017e: 030b lsls r3, r1, #12 + 8000180: 1ac0 subs r0, r0, r3 + 8000182: 4152 adcs r2, r2 + 8000184: 0ac3 lsrs r3, r0, #11 + 8000186: 428b cmp r3, r1 + 8000188: d301 bcc.n 800018e <__udivsi3+0x76> + 800018a: 02cb lsls r3, r1, #11 + 800018c: 1ac0 subs r0, r0, r3 + 800018e: 4152 adcs r2, r2 + 8000190: 0a83 lsrs r3, r0, #10 + 8000192: 428b cmp r3, r1 + 8000194: d301 bcc.n 800019a <__udivsi3+0x82> + 8000196: 028b lsls r3, r1, #10 + 8000198: 1ac0 subs r0, r0, r3 + 800019a: 4152 adcs r2, r2 + 800019c: 0a43 lsrs r3, r0, #9 + 800019e: 428b cmp r3, r1 + 80001a0: d301 bcc.n 80001a6 <__udivsi3+0x8e> + 80001a2: 024b lsls r3, r1, #9 + 80001a4: 1ac0 subs r0, r0, r3 + 80001a6: 4152 adcs r2, r2 + 80001a8: 0a03 lsrs r3, r0, #8 + 80001aa: 428b cmp r3, r1 + 80001ac: d301 bcc.n 80001b2 <__udivsi3+0x9a> + 80001ae: 020b lsls r3, r1, #8 + 80001b0: 1ac0 subs r0, r0, r3 + 80001b2: 4152 adcs r2, r2 + 80001b4: d2cd bcs.n 8000152 <__udivsi3+0x3a> + 80001b6: 09c3 lsrs r3, r0, #7 + 80001b8: 428b cmp r3, r1 + 80001ba: d301 bcc.n 80001c0 <__udivsi3+0xa8> + 80001bc: 01cb lsls r3, r1, #7 + 80001be: 1ac0 subs r0, r0, r3 + 80001c0: 4152 adcs r2, r2 + 80001c2: 0983 lsrs r3, r0, #6 + 80001c4: 428b cmp r3, r1 + 80001c6: d301 bcc.n 80001cc <__udivsi3+0xb4> + 80001c8: 018b lsls r3, r1, #6 + 80001ca: 1ac0 subs r0, r0, r3 + 80001cc: 4152 adcs r2, r2 + 80001ce: 0943 lsrs r3, r0, #5 + 80001d0: 428b cmp r3, r1 + 80001d2: d301 bcc.n 80001d8 <__udivsi3+0xc0> + 80001d4: 014b lsls r3, r1, #5 + 80001d6: 1ac0 subs r0, r0, r3 + 80001d8: 4152 adcs r2, r2 + 80001da: 0903 lsrs r3, r0, #4 + 80001dc: 428b cmp r3, r1 + 80001de: d301 bcc.n 80001e4 <__udivsi3+0xcc> + 80001e0: 010b lsls r3, r1, #4 + 80001e2: 1ac0 subs r0, r0, r3 + 80001e4: 4152 adcs r2, r2 + 80001e6: 08c3 lsrs r3, r0, #3 + 80001e8: 428b cmp r3, r1 + 80001ea: d301 bcc.n 80001f0 <__udivsi3+0xd8> + 80001ec: 00cb lsls r3, r1, #3 + 80001ee: 1ac0 subs r0, r0, r3 + 80001f0: 4152 adcs r2, r2 + 80001f2: 0883 lsrs r3, r0, #2 + 80001f4: 428b cmp r3, r1 + 80001f6: d301 bcc.n 80001fc <__udivsi3+0xe4> + 80001f8: 008b lsls r3, r1, #2 + 80001fa: 1ac0 subs r0, r0, r3 + 80001fc: 4152 adcs r2, r2 + 80001fe: 0843 lsrs r3, r0, #1 + 8000200: 428b cmp r3, r1 + 8000202: d301 bcc.n 8000208 <__udivsi3+0xf0> + 8000204: 004b lsls r3, r1, #1 + 8000206: 1ac0 subs r0, r0, r3 + 8000208: 4152 adcs r2, r2 + 800020a: 1a41 subs r1, r0, r1 + 800020c: d200 bcs.n 8000210 <__udivsi3+0xf8> + 800020e: 4601 mov r1, r0 + 8000210: 4152 adcs r2, r2 + 8000212: 4610 mov r0, r2 + 8000214: 4770 bx lr + 8000216: e7ff b.n 8000218 <__udivsi3+0x100> + 8000218: b501 push {r0, lr} + 800021a: 2000 movs r0, #0 + 800021c: f000 f8f0 bl 8000400 <__aeabi_idiv0> + 8000220: bd02 pop {r1, pc} + 8000222: 46c0 nop ; (mov r8, r8) + +08000224 <__aeabi_uidivmod>: + 8000224: 2900 cmp r1, #0 + 8000226: d0f7 beq.n 8000218 <__udivsi3+0x100> + 8000228: e776 b.n 8000118 <__udivsi3> + 800022a: 4770 bx lr + +0800022c <__divsi3>: + 800022c: 4603 mov r3, r0 + 800022e: 430b orrs r3, r1 + 8000230: d47f bmi.n 8000332 <__divsi3+0x106> + 8000232: 2200 movs r2, #0 + 8000234: 0843 lsrs r3, r0, #1 + 8000236: 428b cmp r3, r1 + 8000238: d374 bcc.n 8000324 <__divsi3+0xf8> + 800023a: 0903 lsrs r3, r0, #4 + 800023c: 428b cmp r3, r1 + 800023e: d35f bcc.n 8000300 <__divsi3+0xd4> + 8000240: 0a03 lsrs r3, r0, #8 + 8000242: 428b cmp r3, r1 + 8000244: d344 bcc.n 80002d0 <__divsi3+0xa4> + 8000246: 0b03 lsrs r3, r0, #12 + 8000248: 428b cmp r3, r1 + 800024a: d328 bcc.n 800029e <__divsi3+0x72> + 800024c: 0c03 lsrs r3, r0, #16 + 800024e: 428b cmp r3, r1 + 8000250: d30d bcc.n 800026e <__divsi3+0x42> + 8000252: 22ff movs r2, #255 ; 0xff + 8000254: 0209 lsls r1, r1, #8 + 8000256: ba12 rev r2, r2 + 8000258: 0c03 lsrs r3, r0, #16 + 800025a: 428b cmp r3, r1 + 800025c: d302 bcc.n 8000264 <__divsi3+0x38> + 800025e: 1212 asrs r2, r2, #8 + 8000260: 0209 lsls r1, r1, #8 + 8000262: d065 beq.n 8000330 <__divsi3+0x104> + 8000264: 0b03 lsrs r3, r0, #12 + 8000266: 428b cmp r3, r1 + 8000268: d319 bcc.n 800029e <__divsi3+0x72> + 800026a: e000 b.n 800026e <__divsi3+0x42> + 800026c: 0a09 lsrs r1, r1, #8 + 800026e: 0bc3 lsrs r3, r0, #15 + 8000270: 428b cmp r3, r1 + 8000272: d301 bcc.n 8000278 <__divsi3+0x4c> + 8000274: 03cb lsls r3, r1, #15 + 8000276: 1ac0 subs r0, r0, r3 + 8000278: 4152 adcs r2, r2 + 800027a: 0b83 lsrs r3, r0, #14 + 800027c: 428b cmp r3, r1 + 800027e: d301 bcc.n 8000284 <__divsi3+0x58> + 8000280: 038b lsls r3, r1, #14 + 8000282: 1ac0 subs r0, r0, r3 + 8000284: 4152 adcs r2, r2 + 8000286: 0b43 lsrs r3, r0, #13 + 8000288: 428b cmp r3, r1 + 800028a: d301 bcc.n 8000290 <__divsi3+0x64> + 800028c: 034b lsls r3, r1, #13 + 800028e: 1ac0 subs r0, r0, r3 + 8000290: 4152 adcs r2, r2 + 8000292: 0b03 lsrs r3, r0, #12 + 8000294: 428b cmp r3, r1 + 8000296: d301 bcc.n 800029c <__divsi3+0x70> + 8000298: 030b lsls r3, r1, #12 + 800029a: 1ac0 subs r0, r0, r3 + 800029c: 4152 adcs r2, r2 + 800029e: 0ac3 lsrs r3, r0, #11 + 80002a0: 428b cmp r3, r1 + 80002a2: d301 bcc.n 80002a8 <__divsi3+0x7c> + 80002a4: 02cb lsls r3, r1, #11 + 80002a6: 1ac0 subs r0, r0, r3 + 80002a8: 4152 adcs r2, r2 + 80002aa: 0a83 lsrs r3, r0, #10 + 80002ac: 428b cmp r3, r1 + 80002ae: d301 bcc.n 80002b4 <__divsi3+0x88> + 80002b0: 028b lsls r3, r1, #10 + 80002b2: 1ac0 subs r0, r0, r3 + 80002b4: 4152 adcs r2, r2 + 80002b6: 0a43 lsrs r3, r0, #9 + 80002b8: 428b cmp r3, r1 + 80002ba: d301 bcc.n 80002c0 <__divsi3+0x94> + 80002bc: 024b lsls r3, r1, #9 + 80002be: 1ac0 subs r0, r0, r3 + 80002c0: 4152 adcs r2, r2 + 80002c2: 0a03 lsrs r3, r0, #8 + 80002c4: 428b cmp r3, r1 + 80002c6: d301 bcc.n 80002cc <__divsi3+0xa0> + 80002c8: 020b lsls r3, r1, #8 + 80002ca: 1ac0 subs r0, r0, r3 + 80002cc: 4152 adcs r2, r2 + 80002ce: d2cd bcs.n 800026c <__divsi3+0x40> + 80002d0: 09c3 lsrs r3, r0, #7 + 80002d2: 428b cmp r3, r1 + 80002d4: d301 bcc.n 80002da <__divsi3+0xae> + 80002d6: 01cb lsls r3, r1, #7 + 80002d8: 1ac0 subs r0, r0, r3 + 80002da: 4152 adcs r2, r2 + 80002dc: 0983 lsrs r3, r0, #6 + 80002de: 428b cmp r3, r1 + 80002e0: d301 bcc.n 80002e6 <__divsi3+0xba> + 80002e2: 018b lsls r3, r1, #6 + 80002e4: 1ac0 subs r0, r0, r3 + 80002e6: 4152 adcs r2, r2 + 80002e8: 0943 lsrs r3, r0, #5 + 80002ea: 428b cmp r3, r1 + 80002ec: d301 bcc.n 80002f2 <__divsi3+0xc6> + 80002ee: 014b lsls r3, r1, #5 + 80002f0: 1ac0 subs r0, r0, r3 + 80002f2: 4152 adcs r2, r2 + 80002f4: 0903 lsrs r3, r0, #4 + 80002f6: 428b cmp r3, r1 + 80002f8: d301 bcc.n 80002fe <__divsi3+0xd2> + 80002fa: 010b lsls r3, r1, #4 + 80002fc: 1ac0 subs r0, r0, r3 + 80002fe: 4152 adcs r2, r2 + 8000300: 08c3 lsrs r3, r0, #3 + 8000302: 428b cmp r3, r1 + 8000304: d301 bcc.n 800030a <__divsi3+0xde> + 8000306: 00cb lsls r3, r1, #3 + 8000308: 1ac0 subs r0, r0, r3 + 800030a: 4152 adcs r2, r2 + 800030c: 0883 lsrs r3, r0, #2 + 800030e: 428b cmp r3, r1 + 8000310: d301 bcc.n 8000316 <__divsi3+0xea> + 8000312: 008b lsls r3, r1, #2 + 8000314: 1ac0 subs r0, r0, r3 + 8000316: 4152 adcs r2, r2 + 8000318: 0843 lsrs r3, r0, #1 + 800031a: 428b cmp r3, r1 + 800031c: d301 bcc.n 8000322 <__divsi3+0xf6> + 800031e: 004b lsls r3, r1, #1 + 8000320: 1ac0 subs r0, r0, r3 + 8000322: 4152 adcs r2, r2 + 8000324: 1a41 subs r1, r0, r1 + 8000326: d200 bcs.n 800032a <__divsi3+0xfe> + 8000328: 4601 mov r1, r0 + 800032a: 4152 adcs r2, r2 + 800032c: 4610 mov r0, r2 + 800032e: 4770 bx lr + 8000330: e05d b.n 80003ee <__divsi3+0x1c2> + 8000332: 0fca lsrs r2, r1, #31 + 8000334: d000 beq.n 8000338 <__divsi3+0x10c> + 8000336: 4249 negs r1, r1 + 8000338: 1003 asrs r3, r0, #32 + 800033a: d300 bcc.n 800033e <__divsi3+0x112> + 800033c: 4240 negs r0, r0 + 800033e: 4053 eors r3, r2 + 8000340: 2200 movs r2, #0 + 8000342: 469c mov ip, r3 + 8000344: 0903 lsrs r3, r0, #4 + 8000346: 428b cmp r3, r1 + 8000348: d32d bcc.n 80003a6 <__divsi3+0x17a> + 800034a: 0a03 lsrs r3, r0, #8 + 800034c: 428b cmp r3, r1 + 800034e: d312 bcc.n 8000376 <__divsi3+0x14a> + 8000350: 22fc movs r2, #252 ; 0xfc + 8000352: 0189 lsls r1, r1, #6 + 8000354: ba12 rev r2, r2 + 8000356: 0a03 lsrs r3, r0, #8 + 8000358: 428b cmp r3, r1 + 800035a: d30c bcc.n 8000376 <__divsi3+0x14a> + 800035c: 0189 lsls r1, r1, #6 + 800035e: 1192 asrs r2, r2, #6 + 8000360: 428b cmp r3, r1 + 8000362: d308 bcc.n 8000376 <__divsi3+0x14a> + 8000364: 0189 lsls r1, r1, #6 + 8000366: 1192 asrs r2, r2, #6 + 8000368: 428b cmp r3, r1 + 800036a: d304 bcc.n 8000376 <__divsi3+0x14a> + 800036c: 0189 lsls r1, r1, #6 + 800036e: d03a beq.n 80003e6 <__divsi3+0x1ba> + 8000370: 1192 asrs r2, r2, #6 + 8000372: e000 b.n 8000376 <__divsi3+0x14a> + 8000374: 0989 lsrs r1, r1, #6 + 8000376: 09c3 lsrs r3, r0, #7 + 8000378: 428b cmp r3, r1 + 800037a: d301 bcc.n 8000380 <__divsi3+0x154> + 800037c: 01cb lsls r3, r1, #7 + 800037e: 1ac0 subs r0, r0, r3 + 8000380: 4152 adcs r2, r2 + 8000382: 0983 lsrs r3, r0, #6 + 8000384: 428b cmp r3, r1 + 8000386: d301 bcc.n 800038c <__divsi3+0x160> + 8000388: 018b lsls r3, r1, #6 + 800038a: 1ac0 subs r0, r0, r3 + 800038c: 4152 adcs r2, r2 + 800038e: 0943 lsrs r3, r0, #5 + 8000390: 428b cmp r3, r1 + 8000392: d301 bcc.n 8000398 <__divsi3+0x16c> + 8000394: 014b lsls r3, r1, #5 + 8000396: 1ac0 subs r0, r0, r3 + 8000398: 4152 adcs r2, r2 + 800039a: 0903 lsrs r3, r0, #4 + 800039c: 428b cmp r3, r1 + 800039e: d301 bcc.n 80003a4 <__divsi3+0x178> + 80003a0: 010b lsls r3, r1, #4 + 80003a2: 1ac0 subs r0, r0, r3 + 80003a4: 4152 adcs r2, r2 + 80003a6: 08c3 lsrs r3, r0, #3 + 80003a8: 428b cmp r3, r1 + 80003aa: d301 bcc.n 80003b0 <__divsi3+0x184> + 80003ac: 00cb lsls r3, r1, #3 + 80003ae: 1ac0 subs r0, r0, r3 + 80003b0: 4152 adcs r2, r2 + 80003b2: 0883 lsrs r3, r0, #2 + 80003b4: 428b cmp r3, r1 + 80003b6: d301 bcc.n 80003bc <__divsi3+0x190> + 80003b8: 008b lsls r3, r1, #2 + 80003ba: 1ac0 subs r0, r0, r3 + 80003bc: 4152 adcs r2, r2 + 80003be: d2d9 bcs.n 8000374 <__divsi3+0x148> + 80003c0: 0843 lsrs r3, r0, #1 + 80003c2: 428b cmp r3, r1 + 80003c4: d301 bcc.n 80003ca <__divsi3+0x19e> + 80003c6: 004b lsls r3, r1, #1 + 80003c8: 1ac0 subs r0, r0, r3 + 80003ca: 4152 adcs r2, r2 + 80003cc: 1a41 subs r1, r0, r1 + 80003ce: d200 bcs.n 80003d2 <__divsi3+0x1a6> + 80003d0: 4601 mov r1, r0 + 80003d2: 4663 mov r3, ip + 80003d4: 4152 adcs r2, r2 + 80003d6: 105b asrs r3, r3, #1 + 80003d8: 4610 mov r0, r2 + 80003da: d301 bcc.n 80003e0 <__divsi3+0x1b4> + 80003dc: 4240 negs r0, r0 + 80003de: 2b00 cmp r3, #0 + 80003e0: d500 bpl.n 80003e4 <__divsi3+0x1b8> + 80003e2: 4249 negs r1, r1 + 80003e4: 4770 bx lr + 80003e6: 4663 mov r3, ip + 80003e8: 105b asrs r3, r3, #1 + 80003ea: d300 bcc.n 80003ee <__divsi3+0x1c2> + 80003ec: 4240 negs r0, r0 + 80003ee: b501 push {r0, lr} + 80003f0: 2000 movs r0, #0 + 80003f2: f000 f805 bl 8000400 <__aeabi_idiv0> + 80003f6: bd02 pop {r1, pc} + +080003f8 <__aeabi_idivmod>: + 80003f8: 2900 cmp r1, #0 + 80003fa: d0f8 beq.n 80003ee <__divsi3+0x1c2> + 80003fc: e716 b.n 800022c <__divsi3> + 80003fe: 4770 bx lr + +08000400 <__aeabi_idiv0>: + 8000400: 4770 bx lr + 8000402: 46c0 nop ; (mov r8, r8) + +08000404 <__aeabi_lmul>: + 8000404: b5f0 push {r4, r5, r6, r7, lr} + 8000406: 46ce mov lr, r9 + 8000408: 4647 mov r7, r8 + 800040a: 0415 lsls r5, r2, #16 + 800040c: 0c2d lsrs r5, r5, #16 + 800040e: 002e movs r6, r5 + 8000410: b580 push {r7, lr} + 8000412: 0407 lsls r7, r0, #16 + 8000414: 0c14 lsrs r4, r2, #16 + 8000416: 0c3f lsrs r7, r7, #16 + 8000418: 4699 mov r9, r3 + 800041a: 0c03 lsrs r3, r0, #16 + 800041c: 437e muls r6, r7 + 800041e: 435d muls r5, r3 + 8000420: 4367 muls r7, r4 + 8000422: 4363 muls r3, r4 + 8000424: 197f adds r7, r7, r5 + 8000426: 0c34 lsrs r4, r6, #16 + 8000428: 19e4 adds r4, r4, r7 + 800042a: 469c mov ip, r3 + 800042c: 42a5 cmp r5, r4 + 800042e: d903 bls.n 8000438 <__aeabi_lmul+0x34> + 8000430: 2380 movs r3, #128 ; 0x80 + 8000432: 025b lsls r3, r3, #9 + 8000434: 4698 mov r8, r3 + 8000436: 44c4 add ip, r8 + 8000438: 464b mov r3, r9 + 800043a: 4343 muls r3, r0 + 800043c: 4351 muls r1, r2 + 800043e: 0c25 lsrs r5, r4, #16 + 8000440: 0436 lsls r6, r6, #16 + 8000442: 4465 add r5, ip + 8000444: 0c36 lsrs r6, r6, #16 + 8000446: 0424 lsls r4, r4, #16 + 8000448: 19a4 adds r4, r4, r6 + 800044a: 195b adds r3, r3, r5 + 800044c: 1859 adds r1, r3, r1 + 800044e: 0020 movs r0, r4 + 8000450: bc0c pop {r2, r3} + 8000452: 4690 mov r8, r2 + 8000454: 4699 mov r9, r3 + 8000456: bdf0 pop {r4, r5, r6, r7, pc} + +08000458 <__NVIC_SystemReset>: +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + 8000458: b580 push {r7, lr} + 800045a: af00 add r7, sp, #0 + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); + 800045c: f3bf 8f4f dsb sy + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + 8000460: 4b03 ldr r3, [pc, #12] ; (8000470 <__NVIC_SystemReset+0x18>) + 8000462: 4a04 ldr r2, [pc, #16] ; (8000474 <__NVIC_SystemReset+0x1c>) + 8000464: 60da str r2, [r3, #12] + 8000466: f3bf 8f4f dsb sy + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + 800046a: 46c0 nop ; (mov r8, r8) + 800046c: e7fd b.n 800046a <__NVIC_SystemReset+0x12> + 800046e: 46c0 nop ; (mov r8, r8) + 8000470: e000ed00 .word 0xe000ed00 + 8000474: 05fa0004 .word 0x05fa0004 + +08000478 : +char _data[MY_RS485_MAX_MESSAGE_LENGTH]; +uint8_t _packet_len; +unsigned char _packet_from; + +_Bool send(MyMessage *message, uint8_t data_type) +{ + 8000478: b580 push {r7, lr} + 800047a: b082 sub sp, #8 + 800047c: af00 add r7, sp, #0 + 800047e: 6078 str r0, [r7, #4] + 8000480: 000a movs r2, r1 + 8000482: 1cfb adds r3, r7, #3 + 8000484: 701a strb r2, [r3, #0] + message->last = MY_NODE_ID; + 8000486: 687b ldr r3, [r7, #4] + 8000488: 22c8 movs r2, #200 ; 0xc8 + 800048a: 701a strb r2, [r3, #0] + message->sender = MY_NODE_ID; + 800048c: 687b ldr r3, [r7, #4] + 800048e: 22c8 movs r2, #200 ; 0xc8 + 8000490: 705a strb r2, [r3, #1] + message->destination = GATEWAY_ADDRESS; + 8000492: 687b ldr r3, [r7, #4] + 8000494: 2200 movs r2, #0 + 8000496: 709a strb r2, [r3, #2] + message->command_echo_payload = (data_type << 5) + C_SET; + 8000498: 1cfb adds r3, r7, #3 + 800049a: 781b ldrb r3, [r3, #0] + 800049c: 015b lsls r3, r3, #5 + 800049e: b2db uxtb r3, r3 + 80004a0: 3301 adds r3, #1 + 80004a2: b2da uxtb r2, r3 + 80004a4: 687b ldr r3, [r7, #4] + 80004a6: 711a strb r2, [r3, #4] + + return transportSend(message); + 80004a8: 687b ldr r3, [r7, #4] + 80004aa: 0018 movs r0, r3 + 80004ac: f000 fb4e bl 8000b4c + 80004b0: 0003 movs r3, r0 +} + 80004b2: 0018 movs r0, r3 + 80004b4: 46bd mov sp, r7 + 80004b6: b002 add sp, #8 + 80004b8: bd80 pop {r7, pc} + ... + +080004bc : + +_Bool sendHeartbeat(void) +{ + 80004bc: b580 push {r7, lr} + 80004be: af00 add r7, sp, #0 + _msgTmp.last = MY_NODE_ID; + 80004c0: 4b15 ldr r3, [pc, #84] ; (8000518 ) + 80004c2: 22c8 movs r2, #200 ; 0xc8 + 80004c4: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 80004c6: 4b14 ldr r3, [pc, #80] ; (8000518 ) + 80004c8: 22c8 movs r2, #200 ; 0xc8 + 80004ca: 705a strb r2, [r3, #1] + _msgTmp.destination = GATEWAY_ADDRESS; + 80004cc: 4b12 ldr r3, [pc, #72] ; (8000518 ) + 80004ce: 2200 movs r2, #0 + 80004d0: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_ULONG32 << 5) + C_INTERNAL; + 80004d2: 4b11 ldr r3, [pc, #68] ; (8000518 ) + 80004d4: 22a3 movs r2, #163 ; 0xa3 + 80004d6: 711a strb r2, [r3, #4] + _msgTmp.type = I_HEARTBEAT_RESPONSE; + 80004d8: 4b0f ldr r3, [pc, #60] ; (8000518 ) + 80004da: 2216 movs r2, #22 + 80004dc: 715a strb r2, [r3, #5] + _msgTmp.version_length = (4 << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + 80004de: 4b0e ldr r3, [pc, #56] ; (8000518 ) + 80004e0: 2222 movs r2, #34 ; 0x22 + 80004e2: 70da strb r2, [r3, #3] + _msgTmp.ulValue = 0; + 80004e4: 4b0c ldr r3, [pc, #48] ; (8000518 ) + 80004e6: 3307 adds r3, #7 + 80004e8: 781a ldrb r2, [r3, #0] + 80004ea: 2100 movs r1, #0 + 80004ec: 400a ands r2, r1 + 80004ee: 701a strb r2, [r3, #0] + 80004f0: 785a ldrb r2, [r3, #1] + 80004f2: 2100 movs r1, #0 + 80004f4: 400a ands r2, r1 + 80004f6: 705a strb r2, [r3, #1] + 80004f8: 789a ldrb r2, [r3, #2] + 80004fa: 2100 movs r1, #0 + 80004fc: 400a ands r2, r1 + 80004fe: 709a strb r2, [r3, #2] + 8000500: 78da ldrb r2, [r3, #3] + 8000502: 2100 movs r1, #0 + 8000504: 400a ands r2, r1 + 8000506: 70da strb r2, [r3, #3] + + return transportSend(&_msgTmp); + 8000508: 4b03 ldr r3, [pc, #12] ; (8000518 ) + 800050a: 0018 movs r0, r3 + 800050c: f000 fb1e bl 8000b4c + 8000510: 0003 movs r3, r0 +} + 8000512: 0018 movs r0, r3 + 8000514: 46bd mov sp, r7 + 8000516: bd80 pop {r7, pc} + 8000518: 200000dc .word 0x200000dc + +0800051c : + +_Bool present(const uint8_t childSensorId, const mysensors_sensor_t sensorType, char *desc) +{ + 800051c: b580 push {r7, lr} + 800051e: b082 sub sp, #8 + 8000520: af00 add r7, sp, #0 + 8000522: 603a str r2, [r7, #0] + 8000524: 1dfb adds r3, r7, #7 + 8000526: 1c02 adds r2, r0, #0 + 8000528: 701a strb r2, [r3, #0] + 800052a: 1dbb adds r3, r7, #6 + 800052c: 1c0a adds r2, r1, #0 + 800052e: 701a strb r2, [r3, #0] + _msgTmp.last = MY_NODE_ID; + 8000530: 4b17 ldr r3, [pc, #92] ; (8000590 ) + 8000532: 22c8 movs r2, #200 ; 0xc8 + 8000534: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 8000536: 4b16 ldr r3, [pc, #88] ; (8000590 ) + 8000538: 22c8 movs r2, #200 ; 0xc8 + 800053a: 705a strb r2, [r3, #1] + _msgTmp.destination = GATEWAY_ADDRESS; + 800053c: 4b14 ldr r3, [pc, #80] ; (8000590 ) + 800053e: 2200 movs r2, #0 + 8000540: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_STRING << 5) + C_PRESENTATION; + 8000542: 4b13 ldr r3, [pc, #76] ; (8000590 ) + 8000544: 2200 movs r2, #0 + 8000546: 711a strb r2, [r3, #4] + _msgTmp.type = sensorType; + 8000548: 4b11 ldr r3, [pc, #68] ; (8000590 ) + 800054a: 1dba adds r2, r7, #6 + 800054c: 7812 ldrb r2, [r2, #0] + 800054e: 715a strb r2, [r3, #5] + _msgTmp.sensor = childSensorId; + 8000550: 4b0f ldr r3, [pc, #60] ; (8000590 ) + 8000552: 1dfa adds r2, r7, #7 + 8000554: 7812 ldrb r2, [r2, #0] + 8000556: 719a strb r2, [r3, #6] + _msgTmp.version_length = (strlen(desc) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + 8000558: 683b ldr r3, [r7, #0] + 800055a: 0018 movs r0, r3 + 800055c: f7ff fdd4 bl 8000108 + 8000560: 0003 movs r3, r0 + 8000562: b2db uxtb r3, r3 + 8000564: 00db lsls r3, r3, #3 + 8000566: b2db uxtb r3, r3 + 8000568: 3302 adds r3, #2 + 800056a: b2da uxtb r2, r3 + 800056c: 4b08 ldr r3, [pc, #32] ; (8000590 ) + 800056e: 70da strb r2, [r3, #3] + strcpy((char *)_msgTmp.data, desc); + 8000570: 683a ldr r2, [r7, #0] + 8000572: 4b08 ldr r3, [pc, #32] ; (8000594 ) + 8000574: 0011 movs r1, r2 + 8000576: 0018 movs r0, r3 + 8000578: f002 fcd6 bl 8002f28 + + return transportSend(&_msgTmp); + 800057c: 4b04 ldr r3, [pc, #16] ; (8000590 ) + 800057e: 0018 movs r0, r3 + 8000580: f000 fae4 bl 8000b4c + 8000584: 0003 movs r3, r0 +} + 8000586: 0018 movs r0, r3 + 8000588: 46bd mov sp, r7 + 800058a: b002 add sp, #8 + 800058c: bd80 pop {r7, pc} + 800058e: 46c0 nop ; (mov r8, r8) + 8000590: 200000dc .word 0x200000dc + 8000594: 200000e3 .word 0x200000e3 + +08000598 : + +void registerNode(void) +{ + 8000598: b580 push {r7, lr} + 800059a: af00 add r7, sp, #0 + _msgTmp.last = MY_NODE_ID; + 800059c: 4b0f ldr r3, [pc, #60] ; (80005dc ) + 800059e: 22c8 movs r2, #200 ; 0xc8 + 80005a0: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 80005a2: 4b0e ldr r3, [pc, #56] ; (80005dc ) + 80005a4: 22c8 movs r2, #200 ; 0xc8 + 80005a6: 705a strb r2, [r3, #1] + _msgTmp.destination = GATEWAY_ADDRESS; + 80005a8: 4b0c ldr r3, [pc, #48] ; (80005dc ) + 80005aa: 2200 movs r2, #0 + 80005ac: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_BYTE << 5) + C_INTERNAL; + 80005ae: 4b0b ldr r3, [pc, #44] ; (80005dc ) + 80005b0: 2223 movs r2, #35 ; 0x23 + 80005b2: 711a strb r2, [r3, #4] + _msgTmp.type = I_REGISTRATION_REQUEST; + 80005b4: 4b09 ldr r3, [pc, #36] ; (80005dc ) + 80005b6: 221a movs r2, #26 + 80005b8: 715a strb r2, [r3, #5] + _msgTmp.sensor = 0; + 80005ba: 4b08 ldr r3, [pc, #32] ; (80005dc ) + 80005bc: 2200 movs r2, #0 + 80005be: 719a strb r2, [r3, #6] + _msgTmp.version_length = (1 << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + 80005c0: 4b06 ldr r3, [pc, #24] ; (80005dc ) + 80005c2: 220a movs r2, #10 + 80005c4: 70da strb r2, [r3, #3] + _msgTmp.bValue = MY_CORE_VERSION; + 80005c6: 4b05 ldr r3, [pc, #20] ; (80005dc ) + 80005c8: 2202 movs r2, #2 + 80005ca: 71da strb r2, [r3, #7] + + transportSend(&_msgTmp); + 80005cc: 4b03 ldr r3, [pc, #12] ; (80005dc ) + 80005ce: 0018 movs r0, r3 + 80005d0: f000 fabc bl 8000b4c +} + 80005d4: 46c0 nop ; (mov r8, r8) + 80005d6: 46bd mov sp, r7 + 80005d8: bd80 pop {r7, pc} + 80005da: 46c0 nop ; (mov r8, r8) + 80005dc: 200000dc .word 0x200000dc + +080005e0 : + +void sendLibraryInfo(void) +{ + 80005e0: b580 push {r7, lr} + 80005e2: af00 add r7, sp, #0 + _msgTmp.last = MY_NODE_ID; + 80005e4: 4b10 ldr r3, [pc, #64] ; (8000628 ) + 80005e6: 22c8 movs r2, #200 ; 0xc8 + 80005e8: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 80005ea: 4b0f ldr r3, [pc, #60] ; (8000628 ) + 80005ec: 22c8 movs r2, #200 ; 0xc8 + 80005ee: 705a strb r2, [r3, #1] + _msgTmp.destination = GATEWAY_ADDRESS; + 80005f0: 4b0d ldr r3, [pc, #52] ; (8000628 ) + 80005f2: 2200 movs r2, #0 + 80005f4: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_STRING << 5) + C_INTERNAL; + 80005f6: 4b0c ldr r3, [pc, #48] ; (8000628 ) + 80005f8: 2203 movs r2, #3 + 80005fa: 711a strb r2, [r3, #4] + _msgTmp.type = I_VERSION; + 80005fc: 4b0a ldr r3, [pc, #40] ; (8000628 ) + 80005fe: 2202 movs r2, #2 + 8000600: 715a strb r2, [r3, #5] + _msgTmp.version_length = (strlen(MY_LIBRARY_VERSION) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + 8000602: 4b09 ldr r3, [pc, #36] ; (8000628 ) + 8000604: 223a movs r2, #58 ; 0x3a + 8000606: 70da strb r2, [r3, #3] + strcpy((char *)_msgTmp.data, MY_LIBRARY_VERSION); + 8000608: 4a08 ldr r2, [pc, #32] ; (800062c ) + 800060a: 4b09 ldr r3, [pc, #36] ; (8000630 ) + 800060c: 0010 movs r0, r2 + 800060e: 0019 movs r1, r3 + 8000610: 2308 movs r3, #8 + 8000612: 001a movs r2, r3 + 8000614: f002 fc20 bl 8002e58 + + transportSend(&_msgTmp); + 8000618: 4b03 ldr r3, [pc, #12] ; (8000628 ) + 800061a: 0018 movs r0, r3 + 800061c: f000 fa96 bl 8000b4c +} + 8000620: 46c0 nop ; (mov r8, r8) + 8000622: 46bd mov sp, r7 + 8000624: bd80 pop {r7, pc} + 8000626: 46c0 nop ; (mov r8, r8) + 8000628: 200000dc .word 0x200000dc + 800062c: 200000e3 .word 0x200000e3 + 8000630: 08003048 .word 0x08003048 + +08000634 : + +_Bool sendSketchInfo(const char *name, const char *version) +{ + 8000634: b580 push {r7, lr} + 8000636: b084 sub sp, #16 + 8000638: af00 add r7, sp, #0 + 800063a: 6078 str r0, [r7, #4] + 800063c: 6039 str r1, [r7, #0] + _Bool result = 1; + 800063e: 230f movs r3, #15 + 8000640: 18fb adds r3, r7, r3 + 8000642: 2201 movs r2, #1 + 8000644: 701a strb r2, [r3, #0] + + if (name) { + 8000646: 687b ldr r3, [r7, #4] + 8000648: 2b00 cmp r3, #0 + 800064a: d02e beq.n 80006aa + _msgTmp.last = MY_NODE_ID; + 800064c: 4b34 ldr r3, [pc, #208] ; (8000720 ) + 800064e: 22c8 movs r2, #200 ; 0xc8 + 8000650: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 8000652: 4b33 ldr r3, [pc, #204] ; (8000720 ) + 8000654: 22c8 movs r2, #200 ; 0xc8 + 8000656: 705a strb r2, [r3, #1] + _msgTmp.destination = GATEWAY_ADDRESS; + 8000658: 4b31 ldr r3, [pc, #196] ; (8000720 ) + 800065a: 2200 movs r2, #0 + 800065c: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_STRING << 5) + C_INTERNAL; + 800065e: 4b30 ldr r3, [pc, #192] ; (8000720 ) + 8000660: 2203 movs r2, #3 + 8000662: 711a strb r2, [r3, #4] + _msgTmp.type = I_SKETCH_NAME; + 8000664: 4b2e ldr r3, [pc, #184] ; (8000720 ) + 8000666: 220b movs r2, #11 + 8000668: 715a strb r2, [r3, #5] + _msgTmp.version_length = (strlen(name) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + 800066a: 687b ldr r3, [r7, #4] + 800066c: 0018 movs r0, r3 + 800066e: f7ff fd4b bl 8000108 + 8000672: 0003 movs r3, r0 + 8000674: b2db uxtb r3, r3 + 8000676: 00db lsls r3, r3, #3 + 8000678: b2db uxtb r3, r3 + 800067a: 3302 adds r3, #2 + 800067c: b2da uxtb r2, r3 + 800067e: 4b28 ldr r3, [pc, #160] ; (8000720 ) + 8000680: 70da strb r2, [r3, #3] + strcpy((char *)_msgTmp.data, name); + 8000682: 687a ldr r2, [r7, #4] + 8000684: 4b27 ldr r3, [pc, #156] ; (8000724 ) + 8000686: 0011 movs r1, r2 + 8000688: 0018 movs r0, r3 + 800068a: f002 fc4d bl 8002f28 + + result &= transportSend(&_msgTmp); + 800068e: 4b24 ldr r3, [pc, #144] ; (8000720 ) + 8000690: 0018 movs r0, r3 + 8000692: f000 fa5b bl 8000b4c + 8000696: 0003 movs r3, r0 + 8000698: 001a movs r2, r3 + 800069a: 210f movs r1, #15 + 800069c: 187b adds r3, r7, r1 + 800069e: 781b ldrb r3, [r3, #0] + 80006a0: 401a ands r2, r3 + 80006a2: 187b adds r3, r7, r1 + 80006a4: 1e51 subs r1, r2, #1 + 80006a6: 418a sbcs r2, r1 + 80006a8: 701a strb r2, [r3, #0] + } + if (version) { + 80006aa: 683b ldr r3, [r7, #0] + 80006ac: 2b00 cmp r3, #0 + 80006ae: d02e beq.n 800070e + _msgTmp.last = MY_NODE_ID; + 80006b0: 4b1b ldr r3, [pc, #108] ; (8000720 ) + 80006b2: 22c8 movs r2, #200 ; 0xc8 + 80006b4: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 80006b6: 4b1a ldr r3, [pc, #104] ; (8000720 ) + 80006b8: 22c8 movs r2, #200 ; 0xc8 + 80006ba: 705a strb r2, [r3, #1] + _msgTmp.destination = GATEWAY_ADDRESS; + 80006bc: 4b18 ldr r3, [pc, #96] ; (8000720 ) + 80006be: 2200 movs r2, #0 + 80006c0: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_STRING << 5) + C_INTERNAL; + 80006c2: 4b17 ldr r3, [pc, #92] ; (8000720 ) + 80006c4: 2203 movs r2, #3 + 80006c6: 711a strb r2, [r3, #4] + _msgTmp.type = I_SKETCH_VERSION; + 80006c8: 4b15 ldr r3, [pc, #84] ; (8000720 ) + 80006ca: 220c movs r2, #12 + 80006cc: 715a strb r2, [r3, #5] + _msgTmp.version_length = (strlen(name) << 3) + V2_MYS_HEADER_PROTOCOL_VERSION; + 80006ce: 687b ldr r3, [r7, #4] + 80006d0: 0018 movs r0, r3 + 80006d2: f7ff fd19 bl 8000108 + 80006d6: 0003 movs r3, r0 + 80006d8: b2db uxtb r3, r3 + 80006da: 00db lsls r3, r3, #3 + 80006dc: b2db uxtb r3, r3 + 80006de: 3302 adds r3, #2 + 80006e0: b2da uxtb r2, r3 + 80006e2: 4b0f ldr r3, [pc, #60] ; (8000720 ) + 80006e4: 70da strb r2, [r3, #3] + strcpy((char *)_msgTmp.data, version); + 80006e6: 683a ldr r2, [r7, #0] + 80006e8: 4b0e ldr r3, [pc, #56] ; (8000724 ) + 80006ea: 0011 movs r1, r2 + 80006ec: 0018 movs r0, r3 + 80006ee: f002 fc1b bl 8002f28 + + result &= transportSend(&_msgTmp); + 80006f2: 4b0b ldr r3, [pc, #44] ; (8000720 ) + 80006f4: 0018 movs r0, r3 + 80006f6: f000 fa29 bl 8000b4c + 80006fa: 0003 movs r3, r0 + 80006fc: 001a movs r2, r3 + 80006fe: 210f movs r1, #15 + 8000700: 187b adds r3, r7, r1 + 8000702: 781b ldrb r3, [r3, #0] + 8000704: 401a ands r2, r3 + 8000706: 187b adds r3, r7, r1 + 8000708: 1e51 subs r1, r2, #1 + 800070a: 418a sbcs r2, r1 + 800070c: 701a strb r2, [r3, #0] + } + + sendLibraryInfo(); + 800070e: f7ff ff67 bl 80005e0 + + return result; + 8000712: 230f movs r3, #15 + 8000714: 18fb adds r3, r7, r3 + 8000716: 781b ldrb r3, [r3, #0] +} + 8000718: 0018 movs r0, r3 + 800071a: 46bd mov sp, r7 + 800071c: b004 add sp, #16 + 800071e: bd80 pop {r7, pc} + 8000720: 200000dc .word 0x200000dc + 8000724: 200000e3 .word 0x200000e3 + +08000728 <_processInternalCoreMessage>: + +// Message delivered through _msg +_Bool _processInternalCoreMessage(void) +{ + 8000728: b580 push {r7, lr} + 800072a: b082 sub sp, #8 + 800072c: af00 add r7, sp, #0 + const uint8_t type = _msg.type; + 800072e: 1dfb adds r3, r7, #7 + 8000730: 4a15 ldr r2, [pc, #84] ; (8000788 <_processInternalCoreMessage+0x60>) + 8000732: 7952 ldrb r2, [r2, #5] + 8000734: 701a strb r2, [r3, #0] + if (_msg.sender == GATEWAY_ADDRESS) { + 8000736: 4b14 ldr r3, [pc, #80] ; (8000788 <_processInternalCoreMessage+0x60>) + 8000738: 785b ldrb r3, [r3, #1] + 800073a: 2b00 cmp r3, #0 + 800073c: d11c bne.n 8000778 <_processInternalCoreMessage+0x50> + if (type == I_PRESENTATION) { + 800073e: 1dfb adds r3, r7, #7 + 8000740: 781b ldrb r3, [r3, #0] + 8000742: 2b13 cmp r3, #19 + 8000744: d102 bne.n 800074c <_processInternalCoreMessage+0x24> + // Re-send node presentation to controller + present_node(); + 8000746: f000 fdd5 bl 80012f4 + 800074a: e017 b.n 800077c <_processInternalCoreMessage+0x54> + } else if (type == I_HEARTBEAT_REQUEST) { + 800074c: 1dfb adds r3, r7, #7 + 800074e: 781b ldrb r3, [r3, #0] + 8000750: 2b12 cmp r3, #18 + 8000752: d102 bne.n 800075a <_processInternalCoreMessage+0x32> + (void)sendHeartbeat(); + 8000754: f7ff feb2 bl 80004bc + 8000758: e010 b.n 800077c <_processInternalCoreMessage+0x54> + } else if (type == I_REBOOT) { + 800075a: 1dfb adds r3, r7, #7 + 800075c: 781b ldrb r3, [r3, #0] + 800075e: 2b0d cmp r3, #13 + 8000760: d101 bne.n 8000766 <_processInternalCoreMessage+0x3e> + NVIC_SystemReset(); + 8000762: f7ff fe79 bl 8000458 <__NVIC_SystemReset> + } else if (type == I_VERSION) { + 8000766: 1dfb adds r3, r7, #7 + 8000768: 781b ldrb r3, [r3, #0] + 800076a: 2b02 cmp r3, #2 + 800076c: d102 bne.n 8000774 <_processInternalCoreMessage+0x4c> + sendLibraryInfo(); + 800076e: f7ff ff37 bl 80005e0 + 8000772: e003 b.n 800077c <_processInternalCoreMessage+0x54> + } else { + return 0; // further processing required + 8000774: 2300 movs r3, #0 + 8000776: e002 b.n 800077e <_processInternalCoreMessage+0x56> + } + } else { + return 0; // further processing required + 8000778: 2300 movs r3, #0 + 800077a: e000 b.n 800077e <_processInternalCoreMessage+0x56> + } + return 1; // if not GW or no further processing required + 800077c: 2301 movs r3, #1 +} + 800077e: 0018 movs r0, r3 + 8000780: 46bd mov sp, r7 + 8000782: b002 add sp, #8 + 8000784: bd80 pop {r7, pc} + 8000786: 46c0 nop ; (mov r8, r8) + 8000788: 200000b8 .word 0x200000b8 + +0800078c : + +void transportProcessMessage(void) +{ + 800078c: b580 push {r7, lr} + 800078e: b082 sub sp, #8 + 8000790: af00 add r7, sp, #0 + // get message length and limit size + const uint8_t msgLength = (_msg.version_length & 0xF8) >> 3; + 8000792: 4b5c ldr r3, [pc, #368] ; (8000904 ) + 8000794: 78da ldrb r2, [r3, #3] + 8000796: 1dfb adds r3, r7, #7 + 8000798: 08d2 lsrs r2, r2, #3 + 800079a: 701a strb r2, [r3, #0] + // calculate expected length + + const uint8_t command = _msg.command_echo_payload & 0x07; + 800079c: 4b59 ldr r3, [pc, #356] ; (8000904 ) + 800079e: 791a ldrb r2, [r3, #4] + 80007a0: 1dbb adds r3, r7, #6 + 80007a2: 2107 movs r1, #7 + 80007a4: 400a ands r2, r1 + 80007a6: 701a strb r2, [r3, #0] + const uint8_t type = _msg.type; + 80007a8: 1d7b adds r3, r7, #5 + 80007aa: 4a56 ldr r2, [pc, #344] ; (8000904 ) + 80007ac: 7952 ldrb r2, [r2, #5] + 80007ae: 701a strb r2, [r3, #0] + const uint8_t sender = _msg.sender; + 80007b0: 1d3b adds r3, r7, #4 + 80007b2: 4a54 ldr r2, [pc, #336] ; (8000904 ) + 80007b4: 7852 ldrb r2, [r2, #1] + 80007b6: 701a strb r2, [r3, #0] + const uint8_t destination = _msg.destination; + 80007b8: 1cfb adds r3, r7, #3 + 80007ba: 4a52 ldr r2, [pc, #328] ; (8000904 ) + 80007bc: 7892 ldrb r2, [r2, #2] + 80007be: 701a strb r2, [r3, #0] + + // Is message addressed to this node? + if (destination == MY_NODE_ID) { + 80007c0: 1cfb adds r3, r7, #3 + 80007c2: 781b ldrb r3, [r3, #0] + 80007c4: 2bc8 cmp r3, #200 ; 0xc8 + 80007c6: d163 bne.n 8000890 + // null terminate data + _msg.data[msgLength] = 0u; + 80007c8: 1dfb adds r3, r7, #7 + 80007ca: 781b ldrb r3, [r3, #0] + 80007cc: 4a4d ldr r2, [pc, #308] ; (8000904 ) + 80007ce: 18d3 adds r3, r2, r3 + 80007d0: 2200 movs r2, #0 + 80007d2: 71da strb r2, [r3, #7] + // Check if sender requests an echo. + if (_msg.command_echo_payload & 0x08) { + 80007d4: 4b4b ldr r3, [pc, #300] ; (8000904 ) + 80007d6: 791b ldrb r3, [r3, #4] + 80007d8: 001a movs r2, r3 + 80007da: 2308 movs r3, #8 + 80007dc: 4013 ands r3, r2 + 80007de: d020 beq.n 8000822 + memcpy(&_msgTmp, &_msg, sizeof(_msg)); // Copy message + 80007e0: 4a49 ldr r2, [pc, #292] ; (8000908 ) + 80007e2: 4b48 ldr r3, [pc, #288] ; (8000904 ) + 80007e4: 0010 movs r0, r2 + 80007e6: 0019 movs r1, r3 + 80007e8: 2321 movs r3, #33 ; 0x21 + 80007ea: 001a movs r2, r3 + 80007ec: f002 fb34 bl 8002e58 + // Reply without echo flag (otherwise we would end up in an eternal loop) + _msgTmp.command_echo_payload = _msgTmp.command_echo_payload & 0xE7; + 80007f0: 4b45 ldr r3, [pc, #276] ; (8000908 ) + 80007f2: 791b ldrb r3, [r3, #4] + 80007f4: 2218 movs r2, #24 + 80007f6: 4393 bics r3, r2 + 80007f8: b2da uxtb r2, r3 + 80007fa: 4b43 ldr r3, [pc, #268] ; (8000908 ) + 80007fc: 711a strb r2, [r3, #4] + _msgTmp.command_echo_payload = _msgTmp.command_echo_payload | 0x10; + 80007fe: 4b42 ldr r3, [pc, #264] ; (8000908 ) + 8000800: 791b ldrb r3, [r3, #4] + 8000802: 2210 movs r2, #16 + 8000804: 4313 orrs r3, r2 + 8000806: b2da uxtb r2, r3 + 8000808: 4b3f ldr r3, [pc, #252] ; (8000908 ) + 800080a: 711a strb r2, [r3, #4] + _msgTmp.sender = MY_NODE_ID; + 800080c: 4b3e ldr r3, [pc, #248] ; (8000908 ) + 800080e: 22c8 movs r2, #200 ; 0xc8 + 8000810: 705a strb r2, [r3, #1] + _msgTmp.destination = sender; + 8000812: 4b3d ldr r3, [pc, #244] ; (8000908 ) + 8000814: 1d3a adds r2, r7, #4 + 8000816: 7812 ldrb r2, [r2, #0] + 8000818: 709a strb r2, [r3, #2] + transportSend(&_msgTmp); + 800081a: 4b3b ldr r3, [pc, #236] ; (8000908 ) + 800081c: 0018 movs r0, r3 + 800081e: f000 f995 bl 8000b4c + } + if(!(_msg.command_echo_payload & 0x10)) { + 8000822: 4b38 ldr r3, [pc, #224] ; (8000904 ) + 8000824: 791b ldrb r3, [r3, #4] + 8000826: 001a movs r2, r3 + 8000828: 2310 movs r3, #16 + 800082a: 4013 ands r3, r2 + 800082c: d12b bne.n 8000886 + // only process if not ECHO + if (command == C_INTERNAL) { + 800082e: 1dbb adds r3, r7, #6 + 8000830: 781b ldrb r3, [r3, #0] + 8000832: 2b03 cmp r3, #3 + 8000834: d127 bne.n 8000886 + if (type == I_ID_RESPONSE) { + 8000836: 1d7b adds r3, r7, #5 + 8000838: 781b ldrb r3, [r3, #0] + 800083a: 2b04 cmp r3, #4 + 800083c: d059 beq.n 80008f2 + return; // no further processing required + } + // general + if (type == I_PING) { + 800083e: 1d7b adds r3, r7, #5 + 8000840: 781b ldrb r3, [r3, #0] + 8000842: 2b18 cmp r3, #24 + 8000844: d117 bne.n 8000876 + _msgTmp.last = MY_NODE_ID; + 8000846: 4b30 ldr r3, [pc, #192] ; (8000908 ) + 8000848: 22c8 movs r2, #200 ; 0xc8 + 800084a: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 800084c: 4b2e ldr r3, [pc, #184] ; (8000908 ) + 800084e: 22c8 movs r2, #200 ; 0xc8 + 8000850: 705a strb r2, [r3, #1] + _msgTmp.destination = sender; + 8000852: 4b2d ldr r3, [pc, #180] ; (8000908 ) + 8000854: 1d3a adds r2, r7, #4 + 8000856: 7812 ldrb r2, [r2, #0] + 8000858: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_BYTE << 5) + C_INTERNAL; + 800085a: 4b2b ldr r3, [pc, #172] ; (8000908 ) + 800085c: 2223 movs r2, #35 ; 0x23 + 800085e: 711a strb r2, [r3, #4] + _msgTmp.type = I_PONG; + 8000860: 4b29 ldr r3, [pc, #164] ; (8000908 ) + 8000862: 2219 movs r2, #25 + 8000864: 715a strb r2, [r3, #5] + _msgTmp.bValue = 1; + 8000866: 4b28 ldr r3, [pc, #160] ; (8000908 ) + 8000868: 2201 movs r2, #1 + 800086a: 71da strb r2, [r3, #7] + transportSend(&_msgTmp); + 800086c: 4b26 ldr r3, [pc, #152] ; (8000908 ) + 800086e: 0018 movs r0, r3 + 8000870: f000 f96c bl 8000b4c + return; // no further processing required + 8000874: e042 b.n 80008fc + } + if (type == I_PONG) { + 8000876: 1d7b adds r3, r7, #5 + 8000878: 781b ldrb r3, [r3, #0] + 800087a: 2b19 cmp r3, #25 + 800087c: d03b beq.n 80008f6 + return; // no further processing required + } + if (_processInternalCoreMessage()) { + 800087e: f7ff ff53 bl 8000728 <_processInternalCoreMessage> + 8000882: 1e03 subs r3, r0, #0 + 8000884: d139 bne.n 80008fa + return; // no further processing required + } + } + } + // Call incoming message callback if available + receive(&_msg); + 8000886: 4b1f ldr r3, [pc, #124] ; (8000904 ) + 8000888: 0018 movs r0, r3 + 800088a: f000 fd6f bl 800136c + 800088e: e035 b.n 80008fc + } else if (destination == BROADCAST_ADDRESS) { + 8000890: 1cfb adds r3, r7, #3 + 8000892: 781b ldrb r3, [r3, #0] + 8000894: 2bff cmp r3, #255 ; 0xff + 8000896: d131 bne.n 80008fc + if (command == C_INTERNAL) { + 8000898: 1dbb adds r3, r7, #6 + 800089a: 781b ldrb r3, [r3, #0] + 800089c: 2b03 cmp r3, #3 + 800089e: d11f bne.n 80008e0 + if (type == I_DISCOVER_REQUEST) { + 80008a0: 1d7b adds r3, r7, #5 + 80008a2: 781b ldrb r3, [r3, #0] + 80008a4: 2b14 cmp r3, #20 + 80008a6: d11b bne.n 80008e0 + + HAL_Delay(MY_NODE_ID * 50); + 80008a8: 4b18 ldr r3, [pc, #96] ; (800090c ) + 80008aa: 0018 movs r0, r3 + 80008ac: f000 ff08 bl 80016c0 + + _msgTmp.last = MY_NODE_ID; + 80008b0: 4b15 ldr r3, [pc, #84] ; (8000908 ) + 80008b2: 22c8 movs r2, #200 ; 0xc8 + 80008b4: 701a strb r2, [r3, #0] + _msgTmp.sender = MY_NODE_ID; + 80008b6: 4b14 ldr r3, [pc, #80] ; (8000908 ) + 80008b8: 22c8 movs r2, #200 ; 0xc8 + 80008ba: 705a strb r2, [r3, #1] + _msgTmp.destination = sender; + 80008bc: 4b12 ldr r3, [pc, #72] ; (8000908 ) + 80008be: 1d3a adds r2, r7, #4 + 80008c0: 7812 ldrb r2, [r2, #0] + 80008c2: 709a strb r2, [r3, #2] + _msgTmp.command_echo_payload = (P_BYTE << 5) + C_INTERNAL; + 80008c4: 4b10 ldr r3, [pc, #64] ; (8000908 ) + 80008c6: 2223 movs r2, #35 ; 0x23 + 80008c8: 711a strb r2, [r3, #4] + _msgTmp.type = I_DISCOVER_RESPONSE; + 80008ca: 4b0f ldr r3, [pc, #60] ; (8000908 ) + 80008cc: 2215 movs r2, #21 + 80008ce: 715a strb r2, [r3, #5] + _msgTmp.bValue = GATEWAY_ADDRESS; + 80008d0: 4b0d ldr r3, [pc, #52] ; (8000908 ) + 80008d2: 2200 movs r2, #0 + 80008d4: 71da strb r2, [r3, #7] + transportSend(&_msgTmp); + 80008d6: 4b0c ldr r3, [pc, #48] ; (8000908 ) + 80008d8: 0018 movs r0, r3 + 80008da: f000 f937 bl 8000b4c + return; // no further processing required + 80008de: e00d b.n 80008fc + } + } + if (command != C_INTERNAL) { + 80008e0: 1dbb adds r3, r7, #6 + 80008e2: 781b ldrb r3, [r3, #0] + 80008e4: 2b03 cmp r3, #3 + 80008e6: d009 beq.n 80008fc + receive(&_msg); + 80008e8: 4b06 ldr r3, [pc, #24] ; (8000904 ) + 80008ea: 0018 movs r0, r3 + 80008ec: f000 fd3e bl 800136c + 80008f0: e004 b.n 80008fc + return; // no further processing required + 80008f2: 46c0 nop ; (mov r8, r8) + 80008f4: e002 b.n 80008fc + return; // no further processing required + 80008f6: 46c0 nop ; (mov r8, r8) + 80008f8: e000 b.n 80008fc + return; // no further processing required + 80008fa: 46c0 nop ; (mov r8, r8) + } + } +} + 80008fc: 46bd mov sp, r7 + 80008fe: b002 add sp, #8 + 8000900: bd80 pop {r7, pc} + 8000902: 46c0 nop ; (mov r8, r8) + 8000904: 200000b8 .word 0x200000b8 + 8000908: 200000dc .word 0x200000dc + 800090c: 00002710 .word 0x00002710 + +08000910 <_serialReset>: + +//Reset the state machine and release the data pointer +void _serialReset() +{ + 8000910: b580 push {r7, lr} + 8000912: af00 add r7, sp, #0 + _recPhase = 0; + 8000914: 4b0a ldr r3, [pc, #40] ; (8000940 <_serialReset+0x30>) + 8000916: 2200 movs r2, #0 + 8000918: 701a strb r2, [r3, #0] + _recPos = 0; + 800091a: 4b0a ldr r3, [pc, #40] ; (8000944 <_serialReset+0x34>) + 800091c: 2200 movs r2, #0 + 800091e: 701a strb r2, [r3, #0] + _recLen = 0; + 8000920: 4b09 ldr r3, [pc, #36] ; (8000948 <_serialReset+0x38>) + 8000922: 2200 movs r2, #0 + 8000924: 701a strb r2, [r3, #0] + _recCommand = 0; + 8000926: 4b09 ldr r3, [pc, #36] ; (800094c <_serialReset+0x3c>) + 8000928: 2200 movs r2, #0 + 800092a: 701a strb r2, [r3, #0] + _recCS = 0; + 800092c: 4b08 ldr r3, [pc, #32] ; (8000950 <_serialReset+0x40>) + 800092e: 2200 movs r2, #0 + 8000930: 701a strb r2, [r3, #0] + _recCalcCS = 0; + 8000932: 4b08 ldr r3, [pc, #32] ; (8000954 <_serialReset+0x44>) + 8000934: 2200 movs r2, #0 + 8000936: 701a strb r2, [r3, #0] +} + 8000938: 46c0 nop ; (mov r8, r8) + 800093a: 46bd mov sp, r7 + 800093c: bd80 pop {r7, pc} + 800093e: 46c0 nop ; (mov r8, r8) + 8000940: 20000101 .word 0x20000101 + 8000944: 200000fd .word 0x200000fd + 8000948: 200000a4 .word 0x200000a4 + 800094c: 20000125 .word 0x20000125 + 8000950: 200000d9 .word 0x200000d9 + 8000954: 200000da .word 0x200000da + +08000958 <_serialProcess>: +// checksum matches the received checksum, AND the destination station is +// our station ID, then look for a registered command that matches the +// command code. If all the above is true, execute the command's +// function. +_Bool _serialProcess() +{ + 8000958: b580 push {r7, lr} + 800095a: b082 sub sp, #8 + 800095c: af00 add r7, sp, #0 + unsigned char i; + if (!_byte_received) { + 800095e: 4b6a ldr r3, [pc, #424] ; (8000b08 <_serialProcess+0x1b0>) + 8000960: 781b ldrb r3, [r3, #0] + 8000962: 2201 movs r2, #1 + 8000964: 4053 eors r3, r2 + 8000966: b2db uxtb r3, r3 + 8000968: 2b00 cmp r3, #0 + 800096a: d001 beq.n 8000970 <_serialProcess+0x18> + return 0; + 800096c: 2300 movs r3, #0 + 800096e: e0c7 b.n 8000b00 <_serialProcess+0x1a8> + } + _byte_received = 0; + 8000970: 4b65 ldr r3, [pc, #404] ; (8000b08 <_serialProcess+0x1b0>) + 8000972: 2200 movs r2, #0 + 8000974: 701a strb r2, [r3, #0] + + switch(_recPhase) { + 8000976: 4b65 ldr r3, [pc, #404] ; (8000b0c <_serialProcess+0x1b4>) + 8000978: 781b ldrb r3, [r3, #0] + 800097a: 2b04 cmp r3, #4 + 800097c: d900 bls.n 8000980 <_serialProcess+0x28> + 800097e: e0be b.n 8000afe <_serialProcess+0x1a6> + 8000980: 009a lsls r2, r3, #2 + 8000982: 4b63 ldr r3, [pc, #396] ; (8000b10 <_serialProcess+0x1b8>) + 8000984: 18d3 adds r3, r2, r3 + 8000986: 681b ldr r3, [r3, #0] + 8000988: 469f mov pc, r3 + // Case 0 looks for the header. Bytes arrive in the serial interface and get + // shifted through a header buffer. When the start and end characters in + // the buffer match the SOH/STX pair, and the destination station ID matches + // our ID, save the header information and progress to the next state. + case 0: + memcpy(&_header[0],&_header[1],5); + 800098a: 4962 ldr r1, [pc, #392] ; (8000b14 <_serialProcess+0x1bc>) + 800098c: 4b62 ldr r3, [pc, #392] ; (8000b18 <_serialProcess+0x1c0>) + 800098e: 2205 movs r2, #5 + 8000990: 0018 movs r0, r3 + 8000992: f002 fa61 bl 8002e58 + _header[5] = _byte; + 8000996: 4b61 ldr r3, [pc, #388] ; (8000b1c <_serialProcess+0x1c4>) + 8000998: 781a ldrb r2, [r3, #0] + 800099a: 4b5f ldr r3, [pc, #380] ; (8000b18 <_serialProcess+0x1c0>) + 800099c: 715a strb r2, [r3, #5] + + if ((_header[0] == SOH) && (_header[5] == STX) && (_header[1] != _header[2])) { + 800099e: 4b5e ldr r3, [pc, #376] ; (8000b18 <_serialProcess+0x1c0>) + 80009a0: 781b ldrb r3, [r3, #0] + 80009a2: 2b01 cmp r3, #1 + 80009a4: d000 beq.n 80009a8 <_serialProcess+0x50> + 80009a6: e0a7 b.n 8000af8 <_serialProcess+0x1a0> + 80009a8: 4b5b ldr r3, [pc, #364] ; (8000b18 <_serialProcess+0x1c0>) + 80009aa: 795b ldrb r3, [r3, #5] + 80009ac: 2b02 cmp r3, #2 + 80009ae: d000 beq.n 80009b2 <_serialProcess+0x5a> + 80009b0: e0a2 b.n 8000af8 <_serialProcess+0x1a0> + 80009b2: 4b59 ldr r3, [pc, #356] ; (8000b18 <_serialProcess+0x1c0>) + 80009b4: 785a ldrb r2, [r3, #1] + 80009b6: 4b58 ldr r3, [pc, #352] ; (8000b18 <_serialProcess+0x1c0>) + 80009b8: 789b ldrb r3, [r3, #2] + 80009ba: 429a cmp r2, r3 + 80009bc: d100 bne.n 80009c0 <_serialProcess+0x68> + 80009be: e09b b.n 8000af8 <_serialProcess+0x1a0> + _recCalcCS = 0; + 80009c0: 4b57 ldr r3, [pc, #348] ; (8000b20 <_serialProcess+0x1c8>) + 80009c2: 2200 movs r2, #0 + 80009c4: 701a strb r2, [r3, #0] + _recStation = _header[1]; + 80009c6: 4b54 ldr r3, [pc, #336] ; (8000b18 <_serialProcess+0x1c0>) + 80009c8: 785a ldrb r2, [r3, #1] + 80009ca: 4b56 ldr r3, [pc, #344] ; (8000b24 <_serialProcess+0x1cc>) + 80009cc: 701a strb r2, [r3, #0] + _recSender = _header[2]; + 80009ce: 4b52 ldr r3, [pc, #328] ; (8000b18 <_serialProcess+0x1c0>) + 80009d0: 789a ldrb r2, [r3, #2] + 80009d2: 4b55 ldr r3, [pc, #340] ; (8000b28 <_serialProcess+0x1d0>) + 80009d4: 701a strb r2, [r3, #0] + _recCommand = _header[3]; + 80009d6: 4b50 ldr r3, [pc, #320] ; (8000b18 <_serialProcess+0x1c0>) + 80009d8: 78da ldrb r2, [r3, #3] + 80009da: 4b54 ldr r3, [pc, #336] ; (8000b2c <_serialProcess+0x1d4>) + 80009dc: 701a strb r2, [r3, #0] + _recLen = _header[4]; + 80009de: 4b4e ldr r3, [pc, #312] ; (8000b18 <_serialProcess+0x1c0>) + 80009e0: 791a ldrb r2, [r3, #4] + 80009e2: 4b53 ldr r3, [pc, #332] ; (8000b30 <_serialProcess+0x1d8>) + 80009e4: 701a strb r2, [r3, #0] + + for (i=1; i<=4; i++) { + 80009e6: 1dfb adds r3, r7, #7 + 80009e8: 2201 movs r2, #1 + 80009ea: 701a strb r2, [r3, #0] + 80009ec: e00e b.n 8000a0c <_serialProcess+0xb4> + _recCalcCS += _header[i]; + 80009ee: 1dfb adds r3, r7, #7 + 80009f0: 781b ldrb r3, [r3, #0] + 80009f2: 4a49 ldr r2, [pc, #292] ; (8000b18 <_serialProcess+0x1c0>) + 80009f4: 5cd2 ldrb r2, [r2, r3] + 80009f6: 4b4a ldr r3, [pc, #296] ; (8000b20 <_serialProcess+0x1c8>) + 80009f8: 781b ldrb r3, [r3, #0] + 80009fa: 18d3 adds r3, r2, r3 + 80009fc: b2da uxtb r2, r3 + 80009fe: 4b48 ldr r3, [pc, #288] ; (8000b20 <_serialProcess+0x1c8>) + 8000a00: 701a strb r2, [r3, #0] + for (i=1; i<=4; i++) { + 8000a02: 1dfb adds r3, r7, #7 + 8000a04: 781a ldrb r2, [r3, #0] + 8000a06: 1dfb adds r3, r7, #7 + 8000a08: 3201 adds r2, #1 + 8000a0a: 701a strb r2, [r3, #0] + 8000a0c: 1dfb adds r3, r7, #7 + 8000a0e: 781b ldrb r3, [r3, #0] + 8000a10: 2b04 cmp r3, #4 + 8000a12: d9ec bls.n 80009ee <_serialProcess+0x96> + } + _recPhase = 1; + 8000a14: 4b3d ldr r3, [pc, #244] ; (8000b0c <_serialProcess+0x1b4>) + 8000a16: 2201 movs r2, #1 + 8000a18: 701a strb r2, [r3, #0] + _recPos = 0; + 8000a1a: 4b46 ldr r3, [pc, #280] ; (8000b34 <_serialProcess+0x1dc>) + 8000a1c: 2200 movs r2, #0 + 8000a1e: 701a strb r2, [r3, #0] + + //Avoid _data[] overflow + if (_recLen >= MY_RS485_MAX_MESSAGE_LENGTH) { + 8000a20: 4b43 ldr r3, [pc, #268] ; (8000b30 <_serialProcess+0x1d8>) + 8000a22: 781b ldrb r3, [r3, #0] + 8000a24: 2b1f cmp r3, #31 + 8000a26: d902 bls.n 8000a2e <_serialProcess+0xd6> + _serialReset(); + 8000a28: f7ff ff72 bl 8000910 <_serialReset> + break; + 8000a2c: e067 b.n 8000afe <_serialProcess+0x1a6> + } + + //Check if we should process this message + //We reject the message if we are the sender + //We reject if we are not the receiver and message is not a broadcast + if ((_recSender == MY_NODE_ID) || + 8000a2e: 4b3e ldr r3, [pc, #248] ; (8000b28 <_serialProcess+0x1d0>) + 8000a30: 781b ldrb r3, [r3, #0] + 8000a32: 2bc8 cmp r3, #200 ; 0xc8 + 8000a34: d007 beq.n 8000a46 <_serialProcess+0xee> + (_recStation != MY_NODE_ID && + 8000a36: 4b3b ldr r3, [pc, #236] ; (8000b24 <_serialProcess+0x1cc>) + 8000a38: 781b ldrb r3, [r3, #0] + if ((_recSender == MY_NODE_ID) || + 8000a3a: 2bc8 cmp r3, #200 ; 0xc8 + 8000a3c: d006 beq.n 8000a4c <_serialProcess+0xf4> + _recStation != BROADCAST_ADDRESS)) { + 8000a3e: 4b39 ldr r3, [pc, #228] ; (8000b24 <_serialProcess+0x1cc>) + 8000a40: 781b ldrb r3, [r3, #0] + (_recStation != MY_NODE_ID && + 8000a42: 2bff cmp r3, #255 ; 0xff + 8000a44: d002 beq.n 8000a4c <_serialProcess+0xf4> + _serialReset(); + 8000a46: f7ff ff63 bl 8000910 <_serialReset> + break; + 8000a4a: e058 b.n 8000afe <_serialProcess+0x1a6> + } + + if (_recLen == 0) { + 8000a4c: 4b38 ldr r3, [pc, #224] ; (8000b30 <_serialProcess+0x1d8>) + 8000a4e: 781b ldrb r3, [r3, #0] + 8000a50: 2b00 cmp r3, #0 + 8000a52: d151 bne.n 8000af8 <_serialProcess+0x1a0> + _recPhase = 2; + 8000a54: 4b2d ldr r3, [pc, #180] ; (8000b0c <_serialProcess+0x1b4>) + 8000a56: 2202 movs r2, #2 + 8000a58: 701a strb r2, [r3, #0] + } + + } + break; + 8000a5a: e04d b.n 8000af8 <_serialProcess+0x1a0> + + // Case 1 receives the data portion of the packet. Read in "_recLen" number + // of bytes and store them in the _data array. + case 1: + _data[_recPos++] = _byte; + 8000a5c: 4b35 ldr r3, [pc, #212] ; (8000b34 <_serialProcess+0x1dc>) + 8000a5e: 781b ldrb r3, [r3, #0] + 8000a60: 1c5a adds r2, r3, #1 + 8000a62: b2d1 uxtb r1, r2 + 8000a64: 4a33 ldr r2, [pc, #204] ; (8000b34 <_serialProcess+0x1dc>) + 8000a66: 7011 strb r1, [r2, #0] + 8000a68: 001a movs r2, r3 + 8000a6a: 4b2c ldr r3, [pc, #176] ; (8000b1c <_serialProcess+0x1c4>) + 8000a6c: 7819 ldrb r1, [r3, #0] + 8000a6e: 4b32 ldr r3, [pc, #200] ; (8000b38 <_serialProcess+0x1e0>) + 8000a70: 5499 strb r1, [r3, r2] + _recCalcCS += _byte; + 8000a72: 4b2b ldr r3, [pc, #172] ; (8000b20 <_serialProcess+0x1c8>) + 8000a74: 781a ldrb r2, [r3, #0] + 8000a76: 4b29 ldr r3, [pc, #164] ; (8000b1c <_serialProcess+0x1c4>) + 8000a78: 781b ldrb r3, [r3, #0] + 8000a7a: 18d3 adds r3, r2, r3 + 8000a7c: b2da uxtb r2, r3 + 8000a7e: 4b28 ldr r3, [pc, #160] ; (8000b20 <_serialProcess+0x1c8>) + 8000a80: 701a strb r2, [r3, #0] + if (_recPos == _recLen) { + 8000a82: 4b2c ldr r3, [pc, #176] ; (8000b34 <_serialProcess+0x1dc>) + 8000a84: 781a ldrb r2, [r3, #0] + 8000a86: 4b2a ldr r3, [pc, #168] ; (8000b30 <_serialProcess+0x1d8>) + 8000a88: 781b ldrb r3, [r3, #0] + 8000a8a: 429a cmp r2, r3 + 8000a8c: d136 bne.n 8000afc <_serialProcess+0x1a4> + _recPhase = 2; + 8000a8e: 4b1f ldr r3, [pc, #124] ; (8000b0c <_serialProcess+0x1b4>) + 8000a90: 2202 movs r2, #2 + 8000a92: 701a strb r2, [r3, #0] + } + break; + 8000a94: e032 b.n 8000afc <_serialProcess+0x1a4> + + // After the data comes a single ETX character. Do we have it? If not, + // reset the state machine to default and start looking for a new header. + case 2: + // Packet properly terminated? + if (_byte == ETX) { + 8000a96: 4b21 ldr r3, [pc, #132] ; (8000b1c <_serialProcess+0x1c4>) + 8000a98: 781b ldrb r3, [r3, #0] + 8000a9a: 2b03 cmp r3, #3 + 8000a9c: d103 bne.n 8000aa6 <_serialProcess+0x14e> + _recPhase = 3; + 8000a9e: 4b1b ldr r3, [pc, #108] ; (8000b0c <_serialProcess+0x1b4>) + 8000aa0: 2203 movs r2, #3 + 8000aa2: 701a strb r2, [r3, #0] + } else { + _serialReset(); + } + break; + 8000aa4: e02b b.n 8000afe <_serialProcess+0x1a6> + _serialReset(); + 8000aa6: f7ff ff33 bl 8000910 <_serialReset> + break; + 8000aaa: e028 b.n 8000afe <_serialProcess+0x1a6> + + // Next comes the checksum. We have already calculated it from the incoming + // data, so just store the incoming checksum byte for later. + case 3: + _recCS = _byte; + 8000aac: 4b1b ldr r3, [pc, #108] ; (8000b1c <_serialProcess+0x1c4>) + 8000aae: 781a ldrb r2, [r3, #0] + 8000ab0: 4b22 ldr r3, [pc, #136] ; (8000b3c <_serialProcess+0x1e4>) + 8000ab2: 701a strb r2, [r3, #0] + _recPhase = 4; + 8000ab4: 4b15 ldr r3, [pc, #84] ; (8000b0c <_serialProcess+0x1b4>) + 8000ab6: 2204 movs r2, #4 + 8000ab8: 701a strb r2, [r3, #0] + break; + 8000aba: e020 b.n 8000afe <_serialProcess+0x1a6> + + // The final state - check the last character is EOT and that the checksum matches. + // If that test passes, then look for a valid command callback to execute. + // Execute it if found. + case 4: + if (_byte == EOT) { + 8000abc: 4b17 ldr r3, [pc, #92] ; (8000b1c <_serialProcess+0x1c4>) + 8000abe: 781b ldrb r3, [r3, #0] + 8000ac0: 2b04 cmp r3, #4 + 8000ac2: d115 bne.n 8000af0 <_serialProcess+0x198> + if (_recCS == _recCalcCS) { + 8000ac4: 4b1d ldr r3, [pc, #116] ; (8000b3c <_serialProcess+0x1e4>) + 8000ac6: 781a ldrb r2, [r3, #0] + 8000ac8: 4b15 ldr r3, [pc, #84] ; (8000b20 <_serialProcess+0x1c8>) + 8000aca: 781b ldrb r3, [r3, #0] + 8000acc: 429a cmp r2, r3 + 8000ace: d10f bne.n 8000af0 <_serialProcess+0x198> + // First, check for system level commands. It is possible + // to register your own callback as well for system level + // commands which will be called after the system default + // hook. + + switch (_recCommand) { + 8000ad0: 4b16 ldr r3, [pc, #88] ; (8000b2c <_serialProcess+0x1d4>) + 8000ad2: 781b ldrb r3, [r3, #0] + 8000ad4: 2b58 cmp r3, #88 ; 0x58 + 8000ad6: d10b bne.n 8000af0 <_serialProcess+0x198> + case ICSC_SYS_PACK: + _packet_from = _recSender; + 8000ad8: 4b13 ldr r3, [pc, #76] ; (8000b28 <_serialProcess+0x1d0>) + 8000ada: 781a ldrb r2, [r3, #0] + 8000adc: 4b18 ldr r3, [pc, #96] ; (8000b40 <_serialProcess+0x1e8>) + 8000ade: 701a strb r2, [r3, #0] + _packet_len = _recLen; + 8000ae0: 4b13 ldr r3, [pc, #76] ; (8000b30 <_serialProcess+0x1d8>) + 8000ae2: 781a ldrb r2, [r3, #0] + 8000ae4: 4b17 ldr r3, [pc, #92] ; (8000b44 <_serialProcess+0x1ec>) + 8000ae6: 701a strb r2, [r3, #0] + _packet_received = 1; + 8000ae8: 4b17 ldr r3, [pc, #92] ; (8000b48 <_serialProcess+0x1f0>) + 8000aea: 2201 movs r2, #1 + 8000aec: 701a strb r2, [r3, #0] + break; + 8000aee: 46c0 nop ; (mov r8, r8) + } + } + } + //Clear the data + _serialReset(); + 8000af0: f7ff ff0e bl 8000910 <_serialReset> + //Return true, we have processed one command + return 1; + 8000af4: 2301 movs r3, #1 + 8000af6: e003 b.n 8000b00 <_serialProcess+0x1a8> + break; + 8000af8: 46c0 nop ; (mov r8, r8) + 8000afa: e000 b.n 8000afe <_serialProcess+0x1a6> + break; + 8000afc: 46c0 nop ; (mov r8, r8) + break; + } + return 1; + 8000afe: 2301 movs r3, #1 +} + 8000b00: 0018 movs r0, r3 + 8000b02: 46bd mov sp, r7 + 8000b04: b002 add sp, #8 + 8000b06: bd80 pop {r7, pc} + 8000b08: 200000b0 .word 0x200000b0 + 8000b0c: 20000101 .word 0x20000101 + 8000b10: 080030c0 .word 0x080030c0 + 8000b14: 200000a9 .word 0x200000a9 + 8000b18: 200000a8 .word 0x200000a8 + 8000b1c: 20000124 .word 0x20000124 + 8000b20: 200000da .word 0x200000da + 8000b24: 200000af .word 0x200000af + 8000b28: 20000100 .word 0x20000100 + 8000b2c: 20000125 .word 0x20000125 + 8000b30: 200000a4 .word 0x200000a4 + 8000b34: 200000fd .word 0x200000fd + 8000b38: 20000104 .word 0x20000104 + 8000b3c: 200000d9 .word 0x200000d9 + 8000b40: 200000ff .word 0x200000ff + 8000b44: 200000ae .word 0x200000ae + 8000b48: 200000fe .word 0x200000fe + +08000b4c : + +_Bool transportSend(MyMessage* data) +{ + 8000b4c: b5f0 push {r4, r5, r6, r7, lr} + 8000b4e: b087 sub sp, #28 + 8000b50: af00 add r7, sp, #0 + 8000b52: 6078 str r0, [r7, #4] + const char *datap = (const char *)data; + 8000b54: 687b ldr r3, [r7, #4] + 8000b56: 613b str r3, [r7, #16] + unsigned char i; + unsigned char len; + unsigned char cs = 0; + 8000b58: 230c movs r3, #12 + 8000b5a: 18fb adds r3, r7, r3 + 8000b5c: 2200 movs r2, #0 + 8000b5e: 701a strb r2, [r3, #0] + + // This is how many times to try and transmit before failing. + unsigned char timeout = 10; + 8000b60: 2317 movs r3, #23 + 8000b62: 18fb adds r3, r7, r3 + 8000b64: 220a movs r2, #10 + 8000b66: 701a strb r2, [r3, #0] + + // Let's start out by looking for a collision. If there has been anything seen in + // the last millisecond, then wait for a random time and check again. + + while (_serialProcess()) { + 8000b68: e030 b.n 8000bcc + unsigned char del; + del = rand() % 20; + 8000b6a: f002 f9ab bl 8002ec4 + 8000b6e: 0003 movs r3, r0 + 8000b70: 2114 movs r1, #20 + 8000b72: 0018 movs r0, r3 + 8000b74: f7ff fc40 bl 80003f8 <__aeabi_idivmod> + 8000b78: 000b movs r3, r1 + 8000b7a: 001a movs r2, r3 + 8000b7c: 230f movs r3, #15 + 8000b7e: 18fb adds r3, r7, r3 + 8000b80: 701a strb r2, [r3, #0] + for (i = 0; i < del; i++) { + 8000b82: 230e movs r3, #14 + 8000b84: 18fb adds r3, r7, r3 + 8000b86: 2200 movs r2, #0 + 8000b88: 701a strb r2, [r3, #0] + 8000b8a: e00b b.n 8000ba4 + HAL_Delay(1); + 8000b8c: 2001 movs r0, #1 + 8000b8e: f000 fd97 bl 80016c0 + _serialProcess(); + 8000b92: f7ff fee1 bl 8000958 <_serialProcess> + for (i = 0; i < del; i++) { + 8000b96: 210e movs r1, #14 + 8000b98: 187b adds r3, r7, r1 + 8000b9a: 781b ldrb r3, [r3, #0] + 8000b9c: 3301 adds r3, #1 + 8000b9e: b2da uxtb r2, r3 + 8000ba0: 187b adds r3, r7, r1 + 8000ba2: 701a strb r2, [r3, #0] + 8000ba4: 230e movs r3, #14 + 8000ba6: 18fb adds r3, r7, r3 + 8000ba8: 781b ldrb r3, [r3, #0] + 8000baa: 220f movs r2, #15 + 8000bac: 18ba adds r2, r7, r2 + 8000bae: 7812 ldrb r2, [r2, #0] + 8000bb0: 429a cmp r2, r3 + 8000bb2: d8eb bhi.n 8000b8c + } + timeout--; + 8000bb4: 2117 movs r1, #23 + 8000bb6: 187b adds r3, r7, r1 + 8000bb8: 781a ldrb r2, [r3, #0] + 8000bba: 187b adds r3, r7, r1 + 8000bbc: 3a01 subs r2, #1 + 8000bbe: 701a strb r2, [r3, #0] + if (timeout == 0) { + 8000bc0: 187b adds r3, r7, r1 + 8000bc2: 781b ldrb r3, [r3, #0] + 8000bc4: 2b00 cmp r3, #0 + 8000bc6: d101 bne.n 8000bcc + // Failed to transmit!!! + return 0; + 8000bc8: 2300 movs r3, #0 + 8000bca: e0cc b.n 8000d66 + while (_serialProcess()) { + 8000bcc: f7ff fec4 bl 8000958 <_serialProcess> + 8000bd0: 1e03 subs r3, r0, #0 + 8000bd2: d1ca bne.n 8000b6a + } + } + + HAL_GPIO_WritePin(TEN_GPIO_Port, TEN_Pin, SET); + 8000bd4: 2390 movs r3, #144 ; 0x90 + 8000bd6: 05db lsls r3, r3, #23 + 8000bd8: 2201 movs r2, #1 + 8000bda: 2120 movs r1, #32 + 8000bdc: 0018 movs r0, r3 + 8000bde: f000 fffc bl 8001bda + + // Start of header by writing multiple SOH + i = SOH; + 8000be2: 230e movs r3, #14 + 8000be4: 18fb adds r3, r7, r3 + 8000be6: 2201 movs r2, #1 + 8000be8: 701a strb r2, [r3, #0] + for(uint8_t w=0; w + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + 8000bf4: 4b5e ldr r3, [pc, #376] ; (8000d70 ) + 8000bf6: 6818 ldr r0, [r3, #0] + 8000bf8: 230e movs r3, #14 + 8000bfa: 18f9 adds r1, r7, r3 + 8000bfc: 2314 movs r3, #20 + 8000bfe: 2201 movs r2, #1 + 8000c00: f001 fdb4 bl 800276c + for(uint8_t w=0; w + } + HAL_UART_Transmit(_huart, (uint8_t*)&data->destination, 1, 20); + 8000c1a: 4b55 ldr r3, [pc, #340] ; (8000d70 ) + 8000c1c: 6818 ldr r0, [r3, #0] + 8000c1e: 687b ldr r3, [r7, #4] + 8000c20: 1c99 adds r1, r3, #2 + 8000c22: 2314 movs r3, #20 + 8000c24: 2201 movs r2, #1 + 8000c26: f001 fda1 bl 800276c + cs += data->destination; + 8000c2a: 687b ldr r3, [r7, #4] + 8000c2c: 789a ldrb r2, [r3, #2] + 8000c2e: 240c movs r4, #12 + 8000c30: 193b adds r3, r7, r4 + 8000c32: 781b ldrb r3, [r3, #0] + 8000c34: 18d3 adds r3, r2, r3 + 8000c36: b2da uxtb r2, r3 + 8000c38: 193b adds r3, r7, r4 + 8000c3a: 701a strb r2, [r3, #0] + i = MY_NODE_ID; + 8000c3c: 250e movs r5, #14 + 8000c3e: 197b adds r3, r7, r5 + 8000c40: 22c8 movs r2, #200 ; 0xc8 + 8000c42: 701a strb r2, [r3, #0] + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + 8000c44: 4b4a ldr r3, [pc, #296] ; (8000d70 ) + 8000c46: 6818 ldr r0, [r3, #0] + 8000c48: 1979 adds r1, r7, r5 + 8000c4a: 2314 movs r3, #20 + 8000c4c: 2201 movs r2, #1 + 8000c4e: f001 fd8d bl 800276c + cs += MY_NODE_ID; + 8000c52: 193b adds r3, r7, r4 + 8000c54: 781b ldrb r3, [r3, #0] + 8000c56: 3b38 subs r3, #56 ; 0x38 + 8000c58: b2da uxtb r2, r3 + 8000c5a: 193b adds r3, r7, r4 + 8000c5c: 701a strb r2, [r3, #0] + i = ICSC_SYS_PACK; // Command code + 8000c5e: 197b adds r3, r7, r5 + 8000c60: 2258 movs r2, #88 ; 0x58 + 8000c62: 701a strb r2, [r3, #0] + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + 8000c64: 4b42 ldr r3, [pc, #264] ; (8000d70 ) + 8000c66: 6818 ldr r0, [r3, #0] + 8000c68: 1979 adds r1, r7, r5 + 8000c6a: 2314 movs r3, #20 + 8000c6c: 2201 movs r2, #1 + 8000c6e: f001 fd7d bl 800276c + cs += ICSC_SYS_PACK; + 8000c72: 193b adds r3, r7, r4 + 8000c74: 781b ldrb r3, [r3, #0] + 8000c76: 3358 adds r3, #88 ; 0x58 + 8000c78: b2da uxtb r2, r3 + 8000c7a: 193b adds r3, r7, r4 + 8000c7c: 701a strb r2, [r3, #0] + len = (data->version_length >> 3) + V2_MYS_HEADER_SIZE; + 8000c7e: 687b ldr r3, [r7, #4] + 8000c80: 78db ldrb r3, [r3, #3] + 8000c82: 08db lsrs r3, r3, #3 + 8000c84: b2db uxtb r3, r3 + 8000c86: 3307 adds r3, #7 + 8000c88: b2da uxtb r2, r3 + 8000c8a: 260d movs r6, #13 + 8000c8c: 19bb adds r3, r7, r6 + 8000c8e: 701a strb r2, [r3, #0] + HAL_UART_Transmit(_huart, (uint8_t*)&len, 1, 20); + 8000c90: 4b37 ldr r3, [pc, #220] ; (8000d70 ) + 8000c92: 6818 ldr r0, [r3, #0] + 8000c94: 19b9 adds r1, r7, r6 + 8000c96: 2314 movs r3, #20 + 8000c98: 2201 movs r2, #1 + 8000c9a: f001 fd67 bl 800276c + cs += len; + 8000c9e: 193b adds r3, r7, r4 + 8000ca0: 781a ldrb r2, [r3, #0] + 8000ca2: 19bb adds r3, r7, r6 + 8000ca4: 781b ldrb r3, [r3, #0] + 8000ca6: 18d3 adds r3, r2, r3 + 8000ca8: b2da uxtb r2, r3 + 8000caa: 193b adds r3, r7, r4 + 8000cac: 701a strb r2, [r3, #0] + i = STX; + 8000cae: 197b adds r3, r7, r5 + 8000cb0: 2202 movs r2, #2 + 8000cb2: 701a strb r2, [r3, #0] + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + 8000cb4: 4b2e ldr r3, [pc, #184] ; (8000d70 ) + 8000cb6: 6818 ldr r0, [r3, #0] + 8000cb8: 1979 adds r1, r7, r5 + 8000cba: 2314 movs r3, #20 + 8000cbc: 2201 movs r2, #1 + 8000cbe: f001 fd55 bl 800276c + HAL_UART_Transmit(_huart, (uint8_t*)datap, len, len + 20); + 8000cc2: 4b2b ldr r3, [pc, #172] ; (8000d70 ) + 8000cc4: 6818 ldr r0, [r3, #0] + 8000cc6: 19bb adds r3, r7, r6 + 8000cc8: 781b ldrb r3, [r3, #0] + 8000cca: b29a uxth r2, r3 + 8000ccc: 19bb adds r3, r7, r6 + 8000cce: 781b ldrb r3, [r3, #0] + 8000cd0: 3314 adds r3, #20 + 8000cd2: 6939 ldr r1, [r7, #16] + 8000cd4: f001 fd4a bl 800276c + for(i=0; i + cs += datap[i]; + 8000ce0: 210e movs r1, #14 + 8000ce2: 187b adds r3, r7, r1 + 8000ce4: 781b ldrb r3, [r3, #0] + 8000ce6: 001a movs r2, r3 + 8000ce8: 693b ldr r3, [r7, #16] + 8000cea: 189b adds r3, r3, r2 + 8000cec: 781a ldrb r2, [r3, #0] + 8000cee: 200c movs r0, #12 + 8000cf0: 183b adds r3, r7, r0 + 8000cf2: 781b ldrb r3, [r3, #0] + 8000cf4: 18d3 adds r3, r2, r3 + 8000cf6: b2da uxtb r2, r3 + 8000cf8: 183b adds r3, r7, r0 + 8000cfa: 701a strb r2, [r3, #0] + for(i=0; i + } + i = ETX; + 8000d18: 210e movs r1, #14 + 8000d1a: 187b adds r3, r7, r1 + 8000d1c: 2203 movs r2, #3 + 8000d1e: 701a strb r2, [r3, #0] + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + 8000d20: 4b13 ldr r3, [pc, #76] ; (8000d70 ) + 8000d22: 6818 ldr r0, [r3, #0] + 8000d24: 000c movs r4, r1 + 8000d26: 1879 adds r1, r7, r1 + 8000d28: 2314 movs r3, #20 + 8000d2a: 2201 movs r2, #1 + 8000d2c: f001 fd1e bl 800276c + HAL_UART_Transmit(_huart, (uint8_t*)&cs, 1, 20); + 8000d30: 4b0f ldr r3, [pc, #60] ; (8000d70 ) + 8000d32: 6818 ldr r0, [r3, #0] + 8000d34: 230c movs r3, #12 + 8000d36: 18f9 adds r1, r7, r3 + 8000d38: 2314 movs r3, #20 + 8000d3a: 2201 movs r2, #1 + 8000d3c: f001 fd16 bl 800276c + i = EOT; + 8000d40: 0021 movs r1, r4 + 8000d42: 187b adds r3, r7, r1 + 8000d44: 2204 movs r2, #4 + 8000d46: 701a strb r2, [r3, #0] + HAL_UART_Transmit(_huart, (uint8_t*)&i, 1, 20); + 8000d48: 4b09 ldr r3, [pc, #36] ; (8000d70 ) + 8000d4a: 6818 ldr r0, [r3, #0] + 8000d4c: 1879 adds r1, r7, r1 + 8000d4e: 2314 movs r3, #20 + 8000d50: 2201 movs r2, #1 + 8000d52: f001 fd0b bl 800276c + + HAL_GPIO_WritePin(TEN_GPIO_Port, TEN_Pin, RESET); + 8000d56: 2390 movs r3, #144 ; 0x90 + 8000d58: 05db lsls r3, r3, #23 + 8000d5a: 2200 movs r2, #0 + 8000d5c: 2120 movs r1, #32 + 8000d5e: 0018 movs r0, r3 + 8000d60: f000 ff3b bl 8001bda + return 1; + 8000d64: 2301 movs r3, #1 +} + 8000d66: 0018 movs r0, r3 + 8000d68: 46bd mov sp, r7 + 8000d6a: b007 add sp, #28 + 8000d6c: bdf0 pop {r4, r5, r6, r7, pc} + 8000d6e: 46c0 nop ; (mov r8, r8) + 8000d70: 200000b4 .word 0x200000b4 + +08000d74 : + +void transportInitialise(UART_HandleTypeDef *huart) +{ + 8000d74: b580 push {r7, lr} + 8000d76: b082 sub sp, #8 + 8000d78: af00 add r7, sp, #0 + 8000d7a: 6078 str r0, [r7, #4] + _huart = huart; + 8000d7c: 4b0d ldr r3, [pc, #52] ; (8000db4 ) + 8000d7e: 687a ldr r2, [r7, #4] + 8000d80: 601a str r2, [r3, #0] + HAL_GPIO_WritePin(TEN_GPIO_Port, TEN_Pin, RESET); + 8000d82: 2390 movs r3, #144 ; 0x90 + 8000d84: 05db lsls r3, r3, #23 + 8000d86: 2200 movs r2, #0 + 8000d88: 2120 movs r1, #32 + 8000d8a: 0018 movs r0, r3 + 8000d8c: f000 ff25 bl 8001bda + _serialReset(); + 8000d90: f7ff fdbe bl 8000910 <_serialReset> + _byte_received = 0; + 8000d94: 4b08 ldr r3, [pc, #32] ; (8000db8 ) + 8000d96: 2200 movs r2, #0 + 8000d98: 701a strb r2, [r3, #0] + srand(MY_NODE_ID); + 8000d9a: 20c8 movs r0, #200 ; 0xc8 + 8000d9c: f002 f86e bl 8002e7c + HAL_Delay(MY_NODE_ID * 50); + 8000da0: 4b06 ldr r3, [pc, #24] ; (8000dbc ) + 8000da2: 0018 movs r0, r3 + 8000da4: f000 fc8c bl 80016c0 + present_node(); + 8000da8: f000 faa4 bl 80012f4 +} + 8000dac: 46c0 nop ; (mov r8, r8) + 8000dae: 46bd mov sp, r7 + 8000db0: b002 add sp, #8 + 8000db2: bd80 pop {r7, pc} + 8000db4: 200000b4 .word 0x200000b4 + 8000db8: 200000b0 .word 0x200000b0 + 8000dbc: 00002710 .word 0x00002710 + +08000dc0 : + +void transportProcess(void) +{ + 8000dc0: b580 push {r7, lr} + 8000dc2: af00 add r7, sp, #0 + _serialProcess(); + 8000dc4: f7ff fdc8 bl 8000958 <_serialProcess> + if (transportReceive(&_msg)) + 8000dc8: 4b05 ldr r3, [pc, #20] ; (8000de0 ) + 8000dca: 0018 movs r0, r3 + 8000dcc: f000 f80a bl 8000de4 + 8000dd0: 1e03 subs r3, r0, #0 + 8000dd2: d001 beq.n 8000dd8 + transportProcessMessage(); + 8000dd4: f7ff fcda bl 800078c +} + 8000dd8: 46c0 nop ; (mov r8, r8) + 8000dda: 46bd mov sp, r7 + 8000ddc: bd80 pop {r7, pc} + 8000dde: 46c0 nop ; (mov r8, r8) + 8000de0: 200000b8 .word 0x200000b8 + +08000de4 : + +uint8_t transportReceive(void* data) +{ + 8000de4: b580 push {r7, lr} + 8000de6: b082 sub sp, #8 + 8000de8: af00 add r7, sp, #0 + 8000dea: 6078 str r0, [r7, #4] + if (_packet_received) { + 8000dec: 4b0b ldr r3, [pc, #44] ; (8000e1c ) + 8000dee: 781b ldrb r3, [r3, #0] + 8000df0: 2b00 cmp r3, #0 + 8000df2: d00d beq.n 8000e10 + memcpy(data,_data,_packet_len); + 8000df4: 4b0a ldr r3, [pc, #40] ; (8000e20 ) + 8000df6: 781b ldrb r3, [r3, #0] + 8000df8: 001a movs r2, r3 + 8000dfa: 490a ldr r1, [pc, #40] ; (8000e24 ) + 8000dfc: 687b ldr r3, [r7, #4] + 8000dfe: 0018 movs r0, r3 + 8000e00: f002 f82a bl 8002e58 + _packet_received = 0; + 8000e04: 4b05 ldr r3, [pc, #20] ; (8000e1c ) + 8000e06: 2200 movs r2, #0 + 8000e08: 701a strb r2, [r3, #0] + return _packet_len; + 8000e0a: 4b05 ldr r3, [pc, #20] ; (8000e20 ) + 8000e0c: 781b ldrb r3, [r3, #0] + 8000e0e: e000 b.n 8000e12 + } else { + return (0); + 8000e10: 2300 movs r3, #0 + } +} + 8000e12: 0018 movs r0, r3 + 8000e14: 46bd mov sp, r7 + 8000e16: b002 add sp, #8 + 8000e18: bd80 pop {r7, pc} + 8000e1a: 46c0 nop ; (mov r8, r8) + 8000e1c: 200000fe .word 0x200000fe + 8000e20: 200000ae .word 0x200000ae + 8000e24: 20000104 .word 0x20000104 + +08000e28
: +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + 8000e28: b5b0 push {r4, r5, r7, lr} + 8000e2a: b08a sub sp, #40 ; 0x28 + 8000e2c: af00 add r7, sp, #0 + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + 8000e2e: f000 fbe3 bl 80015f8 + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + 8000e32: f000 f933 bl 800109c + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + 8000e36: f000 f9c9 bl 80011cc + MX_USART1_UART_Init(); + 8000e3a: f000 f98f bl 800115c + /* USER CODE BEGIN 2 */ + HAL_GPIO_WritePin(Relay1_GPIO_Port, Relay1_Pin, RESET); + 8000e3e: 2390 movs r3, #144 ; 0x90 + 8000e40: 05db lsls r3, r3, #23 + 8000e42: 2200 movs r2, #0 + 8000e44: 2180 movs r1, #128 ; 0x80 + 8000e46: 0018 movs r0, r3 + 8000e48: f000 fec7 bl 8001bda + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, RESET); + 8000e4c: 4b89 ldr r3, [pc, #548] ; (8001074 ) + 8000e4e: 2200 movs r2, #0 + 8000e50: 2102 movs r1, #2 + 8000e52: 0018 movs r0, r3 + 8000e54: f000 fec1 bl 8001bda + HAL_GPIO_WritePin(TEN_GPIO_Port, TEN_Pin, RESET); + 8000e58: 2390 movs r3, #144 ; 0x90 + 8000e5a: 05db lsls r3, r3, #23 + 8000e5c: 2200 movs r2, #0 + 8000e5e: 2120 movs r1, #32 + 8000e60: 0018 movs r0, r3 + 8000e62: f000 feba bl 8001bda + + transportInitialise(&huart1); + 8000e66: 4b84 ldr r3, [pc, #528] ; (8001078 ) + 8000e68: 0018 movs r0, r3 + 8000e6a: f7ff ff83 bl 8000d74 + static uint8_t sentValue2=2; + static uint8_t sentStatus=0; + static uint8_t button=0; + MyMessage msg; + + transportProcess(); // Process incoming data + 8000e6e: f7ff ffa7 bl 8000dc0 + + loopv++; + 8000e72: 4b82 ldr r3, [pc, #520] ; (800107c ) + 8000e74: 881b ldrh r3, [r3, #0] + 8000e76: 3301 adds r3, #1 + 8000e78: b29a uxth r2, r3 + 8000e7a: 4b80 ldr r3, [pc, #512] ; (800107c ) + 8000e7c: 801a strh r2, [r3, #0] + + value = HAL_GPIO_ReadPin(IN1_GPIO_Port, IN1_Pin); + 8000e7e: 2527 movs r5, #39 ; 0x27 + 8000e80: 197c adds r4, r7, r5 + 8000e82: 2390 movs r3, #144 ; 0x90 + 8000e84: 05db lsls r3, r3, #23 + 8000e86: 2102 movs r1, #2 + 8000e88: 0018 movs r0, r3 + 8000e8a: f000 fe89 bl 8001ba0 + 8000e8e: 0003 movs r3, r0 + 8000e90: 7023 strb r3, [r4, #0] + + if (value != sentValue1) { + 8000e92: 4b7b ldr r3, [pc, #492] ; (8001080 ) + 8000e94: 781b ldrb r3, [r3, #0] + 8000e96: 197a adds r2, r7, r5 + 8000e98: 7812 ldrb r2, [r2, #0] + 8000e9a: 429a cmp r2, r3 + 8000e9c: d016 beq.n 8000ecc + // Value has changed from last transmission, send the updated value + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + 8000e9e: 1d3b adds r3, r7, #4 + 8000ea0: 220a movs r2, #10 + 8000ea2: 70da strb r2, [r3, #3] + msg.sensor = IN_ID1; + 8000ea4: 1d3b adds r3, r7, #4 + 8000ea6: 2201 movs r2, #1 + 8000ea8: 719a strb r2, [r3, #6] + msg.type = V_TRIPPED; + 8000eaa: 1d3b adds r3, r7, #4 + 8000eac: 2210 movs r2, #16 + 8000eae: 715a strb r2, [r3, #5] + msg.bValue = value; + 8000eb0: 1d3b adds r3, r7, #4 + 8000eb2: 2427 movs r4, #39 ; 0x27 + 8000eb4: 193a adds r2, r7, r4 + 8000eb6: 7812 ldrb r2, [r2, #0] + 8000eb8: 71da strb r2, [r3, #7] + send(&msg, P_BYTE); + 8000eba: 1d3b adds r3, r7, #4 + 8000ebc: 2101 movs r1, #1 + 8000ebe: 0018 movs r0, r3 + 8000ec0: f7ff fada bl 8000478 + sentValue1 = value; + 8000ec4: 4b6e ldr r3, [pc, #440] ; (8001080 ) + 8000ec6: 193a adds r2, r7, r4 + 8000ec8: 7812 ldrb r2, [r2, #0] + 8000eca: 701a strb r2, [r3, #0] + } + + value = HAL_GPIO_ReadPin(IN2_GPIO_Port, IN2_Pin); + 8000ecc: 2527 movs r5, #39 ; 0x27 + 8000ece: 197c adds r4, r7, r5 + 8000ed0: 2390 movs r3, #144 ; 0x90 + 8000ed2: 05db lsls r3, r3, #23 + 8000ed4: 2101 movs r1, #1 + 8000ed6: 0018 movs r0, r3 + 8000ed8: f000 fe62 bl 8001ba0 + 8000edc: 0003 movs r3, r0 + 8000ede: 7023 strb r3, [r4, #0] + + if (value != sentValue2) { + 8000ee0: 4b68 ldr r3, [pc, #416] ; (8001084 ) + 8000ee2: 781b ldrb r3, [r3, #0] + 8000ee4: 197a adds r2, r7, r5 + 8000ee6: 7812 ldrb r2, [r2, #0] + 8000ee8: 429a cmp r2, r3 + 8000eea: d016 beq.n 8000f1a + // Value has changed from last transmission, send the updated value + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + 8000eec: 1d3b adds r3, r7, #4 + 8000eee: 220a movs r2, #10 + 8000ef0: 70da strb r2, [r3, #3] + msg.sensor = IN_ID2; + 8000ef2: 1d3b adds r3, r7, #4 + 8000ef4: 2202 movs r2, #2 + 8000ef6: 719a strb r2, [r3, #6] + msg.type = V_TRIPPED; + 8000ef8: 1d3b adds r3, r7, #4 + 8000efa: 2210 movs r2, #16 + 8000efc: 715a strb r2, [r3, #5] + msg.bValue = value; + 8000efe: 1d3b adds r3, r7, #4 + 8000f00: 2427 movs r4, #39 ; 0x27 + 8000f02: 193a adds r2, r7, r4 + 8000f04: 7812 ldrb r2, [r2, #0] + 8000f06: 71da strb r2, [r3, #7] + send(&msg, P_BYTE); + 8000f08: 1d3b adds r3, r7, #4 + 8000f0a: 2101 movs r1, #1 + 8000f0c: 0018 movs r0, r3 + 8000f0e: f7ff fab3 bl 8000478 + sentValue2 = value; + 8000f12: 4b5c ldr r3, [pc, #368] ; (8001084 ) + 8000f14: 193a adds r2, r7, r4 + 8000f16: 7812 ldrb r2, [r2, #0] + 8000f18: 701a strb r2, [r3, #0] + } + + value = HAL_GPIO_ReadPin(Button_GPIO_Port, Button_Pin); + 8000f1a: 2527 movs r5, #39 ; 0x27 + 8000f1c: 197c adds r4, r7, r5 + 8000f1e: 2390 movs r3, #144 ; 0x90 + 8000f20: 05db lsls r3, r3, #23 + 8000f22: 2140 movs r1, #64 ; 0x40 + 8000f24: 0018 movs r0, r3 + 8000f26: f000 fe3b bl 8001ba0 + 8000f2a: 0003 movs r3, r0 + 8000f2c: 7023 strb r3, [r4, #0] + + if (value != button) { + 8000f2e: 4b56 ldr r3, [pc, #344] ; (8001088 ) + 8000f30: 781b ldrb r3, [r3, #0] + 8000f32: 197a adds r2, r7, r5 + 8000f34: 7812 ldrb r2, [r2, #0] + 8000f36: 429a cmp r2, r3 + 8000f38: d013 beq.n 8000f62 + button = value; + 8000f3a: 4b53 ldr r3, [pc, #332] ; (8001088 ) + 8000f3c: 2227 movs r2, #39 ; 0x27 + 8000f3e: 18ba adds r2, r7, r2 + 8000f40: 7812 ldrb r2, [r2, #0] + 8000f42: 701a strb r2, [r3, #0] + if (button) { + 8000f44: 4b50 ldr r3, [pc, #320] ; (8001088 ) + 8000f46: 781b ldrb r3, [r3, #0] + 8000f48: 2b00 cmp r3, #0 + 8000f4a: d00a beq.n 8000f62 + sentValue1 = 2; + 8000f4c: 4b4c ldr r3, [pc, #304] ; (8001080 ) + 8000f4e: 2202 movs r2, #2 + 8000f50: 701a strb r2, [r3, #0] + sentValue2 = 2; + 8000f52: 4b4c ldr r3, [pc, #304] ; (8001084 ) + 8000f54: 2202 movs r2, #2 + 8000f56: 701a strb r2, [r3, #0] + sentStatus = 0; + 8000f58: 4b4c ldr r3, [pc, #304] ; (800108c ) + 8000f5a: 2200 movs r2, #0 + 8000f5c: 701a strb r2, [r3, #0] + + present_node(); + 8000f5e: f000 f9c9 bl 80012f4 + } + } + + if (sentStatus == 0) { + 8000f62: 4b4a ldr r3, [pc, #296] ; (800108c ) + 8000f64: 781b ldrb r3, [r3, #0] + 8000f66: 2b00 cmp r3, #0 + 8000f68: d15f bne.n 800102a + sentStatus = 1; + 8000f6a: 4b48 ldr r3, [pc, #288] ; (800108c ) + 8000f6c: 2201 movs r2, #1 + 8000f6e: 701a strb r2, [r3, #0] + + value = HAL_GPIO_ReadPin(Relay1_GPIO_Port, Relay1_Pin); + 8000f70: 2527 movs r5, #39 ; 0x27 + 8000f72: 197c adds r4, r7, r5 + 8000f74: 2390 movs r3, #144 ; 0x90 + 8000f76: 05db lsls r3, r3, #23 + 8000f78: 2180 movs r1, #128 ; 0x80 + 8000f7a: 0018 movs r0, r3 + 8000f7c: f000 fe10 bl 8001ba0 + 8000f80: 0003 movs r3, r0 + 8000f82: 7023 strb r3, [r4, #0] + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + 8000f84: 1d3b adds r3, r7, #4 + 8000f86: 220a movs r2, #10 + 8000f88: 70da strb r2, [r3, #3] + msg.sensor = RELAY_ID1; + 8000f8a: 1d3b adds r3, r7, #4 + 8000f8c: 2203 movs r2, #3 + 8000f8e: 719a strb r2, [r3, #6] + msg.type = V_STATUS; + 8000f90: 1d3b adds r3, r7, #4 + 8000f92: 2202 movs r2, #2 + 8000f94: 715a strb r2, [r3, #5] + if (value) + 8000f96: 197b adds r3, r7, r5 + 8000f98: 781b ldrb r3, [r3, #0] + 8000f9a: 2b00 cmp r3, #0 + 8000f9c: d009 beq.n 8000fb2 + strcpy(msg.data, "1"); + 8000f9e: 1d3b adds r3, r7, #4 + 8000fa0: 1dda adds r2, r3, #7 + 8000fa2: 4b3b ldr r3, [pc, #236] ; (8001090 ) + 8000fa4: 0010 movs r0, r2 + 8000fa6: 0019 movs r1, r3 + 8000fa8: 2302 movs r3, #2 + 8000faa: 001a movs r2, r3 + 8000fac: f001 ff54 bl 8002e58 + 8000fb0: e008 b.n 8000fc4 + else + strcpy(msg.data, "0"); + 8000fb2: 1d3b adds r3, r7, #4 + 8000fb4: 1dda adds r2, r3, #7 + 8000fb6: 4b37 ldr r3, [pc, #220] ; (8001094 ) + 8000fb8: 0010 movs r0, r2 + 8000fba: 0019 movs r1, r3 + 8000fbc: 2302 movs r3, #2 + 8000fbe: 001a movs r2, r3 + 8000fc0: f001 ff4a bl 8002e58 + send(&msg, P_STRING); + 8000fc4: 1d3b adds r3, r7, #4 + 8000fc6: 2100 movs r1, #0 + 8000fc8: 0018 movs r0, r3 + 8000fca: f7ff fa55 bl 8000478 + + value = HAL_GPIO_ReadPin(Relay2_GPIO_Port, Relay2_Pin); + 8000fce: 2527 movs r5, #39 ; 0x27 + 8000fd0: 197c adds r4, r7, r5 + 8000fd2: 4b28 ldr r3, [pc, #160] ; (8001074 ) + 8000fd4: 2102 movs r1, #2 + 8000fd6: 0018 movs r0, r3 + 8000fd8: f000 fde2 bl 8001ba0 + 8000fdc: 0003 movs r3, r0 + 8000fde: 7023 strb r3, [r4, #0] + msg.version_length = V2_MYS_HEADER_PROTOCOL_VERSION + (1 << 3); + 8000fe0: 1d3b adds r3, r7, #4 + 8000fe2: 220a movs r2, #10 + 8000fe4: 70da strb r2, [r3, #3] + msg.sensor = RELAY_ID2; + 8000fe6: 1d3b adds r3, r7, #4 + 8000fe8: 2204 movs r2, #4 + 8000fea: 719a strb r2, [r3, #6] + msg.type = V_STATUS; + 8000fec: 1d3b adds r3, r7, #4 + 8000fee: 2202 movs r2, #2 + 8000ff0: 715a strb r2, [r3, #5] + if (value) + 8000ff2: 197b adds r3, r7, r5 + 8000ff4: 781b ldrb r3, [r3, #0] + 8000ff6: 2b00 cmp r3, #0 + 8000ff8: d009 beq.n 800100e + strcpy(msg.data, "1"); + 8000ffa: 1d3b adds r3, r7, #4 + 8000ffc: 1dda adds r2, r3, #7 + 8000ffe: 4b24 ldr r3, [pc, #144] ; (8001090 ) + 8001000: 0010 movs r0, r2 + 8001002: 0019 movs r1, r3 + 8001004: 2302 movs r3, #2 + 8001006: 001a movs r2, r3 + 8001008: f001 ff26 bl 8002e58 + 800100c: e008 b.n 8001020 + else + strcpy(msg.data, "0"); + 800100e: 1d3b adds r3, r7, #4 + 8001010: 1dda adds r2, r3, #7 + 8001012: 4b20 ldr r3, [pc, #128] ; (8001094 ) + 8001014: 0010 movs r0, r2 + 8001016: 0019 movs r1, r3 + 8001018: 2302 movs r3, #2 + 800101a: 001a movs r2, r3 + 800101c: f001 ff1c bl 8002e58 + send(&msg, P_STRING); + 8001020: 1d3b adds r3, r7, #4 + 8001022: 2100 movs r1, #0 + 8001024: 0018 movs r0, r3 + 8001026: f7ff fa27 bl 8000478 + } + + if (loopv == 0) { + 800102a: 4b14 ldr r3, [pc, #80] ; (800107c ) + 800102c: 881b ldrh r3, [r3, #0] + 800102e: 2b00 cmp r3, #0 + 8001030: d000 beq.n 8001034 + 8001032: e71c b.n 8000e6e + HAL_GPIO_TogglePin(LED_GPIO_Port, LED_Pin); + 8001034: 2390 movs r3, #144 ; 0x90 + 8001036: 05db lsls r3, r3, #23 + 8001038: 2104 movs r1, #4 + 800103a: 0018 movs r0, r3 + 800103c: f000 fdea bl 8001c14 + counter++; + 8001040: 4b15 ldr r3, [pc, #84] ; (8001098 ) + 8001042: 881b ldrh r3, [r3, #0] + 8001044: 3301 adds r3, #1 + 8001046: b29a uxth r2, r3 + 8001048: 4b13 ldr r3, [pc, #76] ; (8001098 ) + 800104a: 801a strh r2, [r3, #0] + if (counter > 3600) { + 800104c: 4b12 ldr r3, [pc, #72] ; (8001098 ) + 800104e: 881a ldrh r2, [r3, #0] + 8001050: 23e1 movs r3, #225 ; 0xe1 + 8001052: 011b lsls r3, r3, #4 + 8001054: 429a cmp r2, r3 + 8001056: d800 bhi.n 800105a + 8001058: e709 b.n 8000e6e + sentValue1 = 2; + 800105a: 4b09 ldr r3, [pc, #36] ; (8001080 ) + 800105c: 2202 movs r2, #2 + 800105e: 701a strb r2, [r3, #0] + sentValue2 = 2; + 8001060: 4b08 ldr r3, [pc, #32] ; (8001084 ) + 8001062: 2202 movs r2, #2 + 8001064: 701a strb r2, [r3, #0] + sentStatus = 0; + 8001066: 4b09 ldr r3, [pc, #36] ; (800108c ) + 8001068: 2200 movs r2, #0 + 800106a: 701a strb r2, [r3, #0] + counter = 0; + 800106c: 4b0a ldr r3, [pc, #40] ; (8001098 ) + 800106e: 2200 movs r2, #0 + 8001070: 801a strh r2, [r3, #0] + { + 8001072: e6fc b.n 8000e6e + 8001074: 48000400 .word 0x48000400 + 8001078: 20000128 .word 0x20000128 + 800107c: 20000090 .word 0x20000090 + 8001080: 20000000 .word 0x20000000 + 8001084: 20000001 .word 0x20000001 + 8001088: 20000092 .word 0x20000092 + 800108c: 20000093 .word 0x20000093 + 8001090: 08003050 .word 0x08003050 + 8001094: 08003054 .word 0x08003054 + 8001098: 20000094 .word 0x20000094 + +0800109c : +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + 800109c: b590 push {r4, r7, lr} + 800109e: b095 sub sp, #84 ; 0x54 + 80010a0: af00 add r7, sp, #0 + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + 80010a2: 2420 movs r4, #32 + 80010a4: 193b adds r3, r7, r4 + 80010a6: 0018 movs r0, r3 + 80010a8: 2330 movs r3, #48 ; 0x30 + 80010aa: 001a movs r2, r3 + 80010ac: 2100 movs r1, #0 + 80010ae: f001 fedc bl 8002e6a + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + 80010b2: 2310 movs r3, #16 + 80010b4: 18fb adds r3, r7, r3 + 80010b6: 0018 movs r0, r3 + 80010b8: 2310 movs r3, #16 + 80010ba: 001a movs r2, r3 + 80010bc: 2100 movs r1, #0 + 80010be: f001 fed4 bl 8002e6a + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + 80010c2: 003b movs r3, r7 + 80010c4: 0018 movs r0, r3 + 80010c6: 2310 movs r3, #16 + 80010c8: 001a movs r2, r3 + 80010ca: 2100 movs r1, #0 + 80010cc: f001 fecd bl 8002e6a + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + 80010d0: 0021 movs r1, r4 + 80010d2: 187b adds r3, r7, r1 + 80010d4: 2201 movs r2, #1 + 80010d6: 601a str r2, [r3, #0] + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + 80010d8: 187b adds r3, r7, r1 + 80010da: 2201 movs r2, #1 + 80010dc: 605a str r2, [r3, #4] + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + 80010de: 187b adds r3, r7, r1 + 80010e0: 2202 movs r2, #2 + 80010e2: 621a str r2, [r3, #32] + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + 80010e4: 187b adds r3, r7, r1 + 80010e6: 2280 movs r2, #128 ; 0x80 + 80010e8: 0252 lsls r2, r2, #9 + 80010ea: 625a str r2, [r3, #36] ; 0x24 + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL3; + 80010ec: 187b adds r3, r7, r1 + 80010ee: 2280 movs r2, #128 ; 0x80 + 80010f0: 02d2 lsls r2, r2, #11 + 80010f2: 629a str r2, [r3, #40] ; 0x28 + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + 80010f4: 187b adds r3, r7, r1 + 80010f6: 2200 movs r2, #0 + 80010f8: 62da str r2, [r3, #44] ; 0x2c + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + 80010fa: 187b adds r3, r7, r1 + 80010fc: 0018 movs r0, r3 + 80010fe: f000 fda5 bl 8001c4c + 8001102: 1e03 subs r3, r0, #0 + 8001104: d001 beq.n 800110a + { + Error_Handler(); + 8001106: f000 f967 bl 80013d8 + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + 800110a: 2110 movs r1, #16 + 800110c: 187b adds r3, r7, r1 + 800110e: 2207 movs r2, #7 + 8001110: 601a str r2, [r3, #0] + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + 8001112: 187b adds r3, r7, r1 + 8001114: 2202 movs r2, #2 + 8001116: 605a str r2, [r3, #4] + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + 8001118: 187b adds r3, r7, r1 + 800111a: 2200 movs r2, #0 + 800111c: 609a str r2, [r3, #8] + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + 800111e: 187b adds r3, r7, r1 + 8001120: 22a0 movs r2, #160 ; 0xa0 + 8001122: 00d2 lsls r2, r2, #3 + 8001124: 60da str r2, [r3, #12] + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + 8001126: 187b adds r3, r7, r1 + 8001128: 2100 movs r1, #0 + 800112a: 0018 movs r0, r3 + 800112c: f001 f8aa bl 8002284 + 8001130: 1e03 subs r3, r0, #0 + 8001132: d001 beq.n 8001138 + { + Error_Handler(); + 8001134: f000 f950 bl 80013d8 + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1; + 8001138: 003b movs r3, r7 + 800113a: 2201 movs r2, #1 + 800113c: 601a str r2, [r3, #0] + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1; + 800113e: 003b movs r3, r7 + 8001140: 2200 movs r2, #0 + 8001142: 609a str r2, [r3, #8] + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + 8001144: 003b movs r3, r7 + 8001146: 0018 movs r0, r3 + 8001148: f001 f9ee bl 8002528 + 800114c: 1e03 subs r3, r0, #0 + 800114e: d001 beq.n 8001154 + { + Error_Handler(); + 8001150: f000 f942 bl 80013d8 + } +} + 8001154: 46c0 nop ; (mov r8, r8) + 8001156: 46bd mov sp, r7 + 8001158: b015 add sp, #84 ; 0x54 + 800115a: bd90 pop {r4, r7, pc} + +0800115c : + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + 800115c: b580 push {r7, lr} + 800115e: af00 add r7, sp, #0 + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + 8001160: 4b18 ldr r3, [pc, #96] ; (80011c4 ) + 8001162: 4a19 ldr r2, [pc, #100] ; (80011c8 ) + 8001164: 601a str r2, [r3, #0] + huart1.Init.BaudRate = 9600; + 8001166: 4b17 ldr r3, [pc, #92] ; (80011c4 ) + 8001168: 2296 movs r2, #150 ; 0x96 + 800116a: 0192 lsls r2, r2, #6 + 800116c: 605a str r2, [r3, #4] + huart1.Init.WordLength = UART_WORDLENGTH_8B; + 800116e: 4b15 ldr r3, [pc, #84] ; (80011c4 ) + 8001170: 2200 movs r2, #0 + 8001172: 609a str r2, [r3, #8] + huart1.Init.StopBits = UART_STOPBITS_1; + 8001174: 4b13 ldr r3, [pc, #76] ; (80011c4 ) + 8001176: 2200 movs r2, #0 + 8001178: 60da str r2, [r3, #12] + huart1.Init.Parity = UART_PARITY_NONE; + 800117a: 4b12 ldr r3, [pc, #72] ; (80011c4 ) + 800117c: 2200 movs r2, #0 + 800117e: 611a str r2, [r3, #16] + huart1.Init.Mode = UART_MODE_TX_RX; + 8001180: 4b10 ldr r3, [pc, #64] ; (80011c4 ) + 8001182: 220c movs r2, #12 + 8001184: 615a str r2, [r3, #20] + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + 8001186: 4b0f ldr r3, [pc, #60] ; (80011c4 ) + 8001188: 2200 movs r2, #0 + 800118a: 619a str r2, [r3, #24] + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + 800118c: 4b0d ldr r3, [pc, #52] ; (80011c4 ) + 800118e: 2200 movs r2, #0 + 8001190: 61da str r2, [r3, #28] + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + 8001192: 4b0c ldr r3, [pc, #48] ; (80011c4 ) + 8001194: 2200 movs r2, #0 + 8001196: 621a str r2, [r3, #32] + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + 8001198: 4b0a ldr r3, [pc, #40] ; (80011c4 ) + 800119a: 2200 movs r2, #0 + 800119c: 625a str r2, [r3, #36] ; 0x24 + if (HAL_UART_Init(&huart1) != HAL_OK) + 800119e: 4b09 ldr r3, [pc, #36] ; (80011c4 ) + 80011a0: 0018 movs r0, r3 + 80011a2: f001 fa8f bl 80026c4 + 80011a6: 1e03 subs r3, r0, #0 + 80011a8: d001 beq.n 80011ae + { + Error_Handler(); + 80011aa: f000 f915 bl 80013d8 + } + /* USER CODE BEGIN USART1_Init 2 */ + __HAL_UART_ENABLE_IT(&huart1, UART_IT_RXNE); + 80011ae: 4b05 ldr r3, [pc, #20] ; (80011c4 ) + 80011b0: 681b ldr r3, [r3, #0] + 80011b2: 681a ldr r2, [r3, #0] + 80011b4: 4b03 ldr r3, [pc, #12] ; (80011c4 ) + 80011b6: 681b ldr r3, [r3, #0] + 80011b8: 2120 movs r1, #32 + 80011ba: 430a orrs r2, r1 + 80011bc: 601a str r2, [r3, #0] + /* USER CODE END USART1_Init 2 */ + +} + 80011be: 46c0 nop ; (mov r8, r8) + 80011c0: 46bd mov sp, r7 + 80011c2: bd80 pop {r7, pc} + 80011c4: 20000128 .word 0x20000128 + 80011c8: 40013800 .word 0x40013800 + +080011cc : + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + 80011cc: b590 push {r4, r7, lr} + 80011ce: b089 sub sp, #36 ; 0x24 + 80011d0: af00 add r7, sp, #0 + GPIO_InitTypeDef GPIO_InitStruct = {0}; + 80011d2: 240c movs r4, #12 + 80011d4: 193b adds r3, r7, r4 + 80011d6: 0018 movs r0, r3 + 80011d8: 2314 movs r3, #20 + 80011da: 001a movs r2, r3 + 80011dc: 2100 movs r1, #0 + 80011de: f001 fe44 bl 8002e6a + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOF_CLK_ENABLE(); + 80011e2: 4b42 ldr r3, [pc, #264] ; (80012ec ) + 80011e4: 695a ldr r2, [r3, #20] + 80011e6: 4b41 ldr r3, [pc, #260] ; (80012ec ) + 80011e8: 2180 movs r1, #128 ; 0x80 + 80011ea: 03c9 lsls r1, r1, #15 + 80011ec: 430a orrs r2, r1 + 80011ee: 615a str r2, [r3, #20] + 80011f0: 4b3e ldr r3, [pc, #248] ; (80012ec ) + 80011f2: 695a ldr r2, [r3, #20] + 80011f4: 2380 movs r3, #128 ; 0x80 + 80011f6: 03db lsls r3, r3, #15 + 80011f8: 4013 ands r3, r2 + 80011fa: 60bb str r3, [r7, #8] + 80011fc: 68bb ldr r3, [r7, #8] + __HAL_RCC_GPIOA_CLK_ENABLE(); + 80011fe: 4b3b ldr r3, [pc, #236] ; (80012ec ) + 8001200: 695a ldr r2, [r3, #20] + 8001202: 4b3a ldr r3, [pc, #232] ; (80012ec ) + 8001204: 2180 movs r1, #128 ; 0x80 + 8001206: 0289 lsls r1, r1, #10 + 8001208: 430a orrs r2, r1 + 800120a: 615a str r2, [r3, #20] + 800120c: 4b37 ldr r3, [pc, #220] ; (80012ec ) + 800120e: 695a ldr r2, [r3, #20] + 8001210: 2380 movs r3, #128 ; 0x80 + 8001212: 029b lsls r3, r3, #10 + 8001214: 4013 ands r3, r2 + 8001216: 607b str r3, [r7, #4] + 8001218: 687b ldr r3, [r7, #4] + __HAL_RCC_GPIOB_CLK_ENABLE(); + 800121a: 4b34 ldr r3, [pc, #208] ; (80012ec ) + 800121c: 695a ldr r2, [r3, #20] + 800121e: 4b33 ldr r3, [pc, #204] ; (80012ec ) + 8001220: 2180 movs r1, #128 ; 0x80 + 8001222: 02c9 lsls r1, r1, #11 + 8001224: 430a orrs r2, r1 + 8001226: 615a str r2, [r3, #20] + 8001228: 4b30 ldr r3, [pc, #192] ; (80012ec ) + 800122a: 695a ldr r2, [r3, #20] + 800122c: 2380 movs r3, #128 ; 0x80 + 800122e: 02db lsls r3, r3, #11 + 8001230: 4013 ands r3, r2 + 8001232: 603b str r3, [r7, #0] + 8001234: 683b ldr r3, [r7, #0] + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOA, LED_Pin|TEN_Pin|Relay1_Pin, GPIO_PIN_RESET); + 8001236: 2390 movs r3, #144 ; 0x90 + 8001238: 05db lsls r3, r3, #23 + 800123a: 2200 movs r2, #0 + 800123c: 21a4 movs r1, #164 ; 0xa4 + 800123e: 0018 movs r0, r3 + 8001240: f000 fccb bl 8001bda + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, GPIO_PIN_RESET); + 8001244: 4b2a ldr r3, [pc, #168] ; (80012f0 ) + 8001246: 2200 movs r2, #0 + 8001248: 2102 movs r1, #2 + 800124a: 0018 movs r0, r3 + 800124c: f000 fcc5 bl 8001bda + + /*Configure GPIO pins : IN2_Pin IN1_Pin Button_Pin */ + GPIO_InitStruct.Pin = IN2_Pin|IN1_Pin|Button_Pin; + 8001250: 193b adds r3, r7, r4 + 8001252: 2243 movs r2, #67 ; 0x43 + 8001254: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + 8001256: 193b adds r3, r7, r4 + 8001258: 2200 movs r2, #0 + 800125a: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_PULLUP; + 800125c: 193b adds r3, r7, r4 + 800125e: 2201 movs r2, #1 + 8001260: 609a str r2, [r3, #8] + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 8001262: 193a adds r2, r7, r4 + 8001264: 2390 movs r3, #144 ; 0x90 + 8001266: 05db lsls r3, r3, #23 + 8001268: 0011 movs r1, r2 + 800126a: 0018 movs r0, r3 + 800126c: f000 fb28 bl 80018c0 + + /*Configure GPIO pins : LED_Pin Relay1_Pin */ + GPIO_InitStruct.Pin = LED_Pin|Relay1_Pin; + 8001270: 193b adds r3, r7, r4 + 8001272: 2284 movs r2, #132 ; 0x84 + 8001274: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 8001276: 193b adds r3, r7, r4 + 8001278: 2201 movs r2, #1 + 800127a: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 800127c: 193b adds r3, r7, r4 + 800127e: 2200 movs r2, #0 + 8001280: 609a str r2, [r3, #8] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + 8001282: 193b adds r3, r7, r4 + 8001284: 2200 movs r2, #0 + 8001286: 60da str r2, [r3, #12] + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 8001288: 193a adds r2, r7, r4 + 800128a: 2390 movs r3, #144 ; 0x90 + 800128c: 05db lsls r3, r3, #23 + 800128e: 0011 movs r1, r2 + 8001290: 0018 movs r0, r3 + 8001292: f000 fb15 bl 80018c0 + + /*Configure GPIO pin : TEN_Pin */ + GPIO_InitStruct.Pin = TEN_Pin; + 8001296: 193b adds r3, r7, r4 + 8001298: 2220 movs r2, #32 + 800129a: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 800129c: 193b adds r3, r7, r4 + 800129e: 2201 movs r2, #1 + 80012a0: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 80012a2: 193b adds r3, r7, r4 + 80012a4: 2200 movs r2, #0 + 80012a6: 609a str r2, [r3, #8] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + 80012a8: 193b adds r3, r7, r4 + 80012aa: 2203 movs r2, #3 + 80012ac: 60da str r2, [r3, #12] + HAL_GPIO_Init(TEN_GPIO_Port, &GPIO_InitStruct); + 80012ae: 193a adds r2, r7, r4 + 80012b0: 2390 movs r3, #144 ; 0x90 + 80012b2: 05db lsls r3, r3, #23 + 80012b4: 0011 movs r1, r2 + 80012b6: 0018 movs r0, r3 + 80012b8: f000 fb02 bl 80018c0 + + /*Configure GPIO pin : Relay2_Pin */ + GPIO_InitStruct.Pin = Relay2_Pin; + 80012bc: 0021 movs r1, r4 + 80012be: 187b adds r3, r7, r1 + 80012c0: 2202 movs r2, #2 + 80012c2: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 80012c4: 187b adds r3, r7, r1 + 80012c6: 2201 movs r2, #1 + 80012c8: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 80012ca: 187b adds r3, r7, r1 + 80012cc: 2200 movs r2, #0 + 80012ce: 609a str r2, [r3, #8] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + 80012d0: 187b adds r3, r7, r1 + 80012d2: 2200 movs r2, #0 + 80012d4: 60da str r2, [r3, #12] + HAL_GPIO_Init(Relay2_GPIO_Port, &GPIO_InitStruct); + 80012d6: 187b adds r3, r7, r1 + 80012d8: 4a05 ldr r2, [pc, #20] ; (80012f0 ) + 80012da: 0019 movs r1, r3 + 80012dc: 0010 movs r0, r2 + 80012de: f000 faef bl 80018c0 + +} + 80012e2: 46c0 nop ; (mov r8, r8) + 80012e4: 46bd mov sp, r7 + 80012e6: b009 add sp, #36 ; 0x24 + 80012e8: bd90 pop {r4, r7, pc} + 80012ea: 46c0 nop ; (mov r8, r8) + 80012ec: 40021000 .word 0x40021000 + 80012f0: 48000400 .word 0x48000400 + +080012f4 : + +/* USER CODE BEGIN 4 */ +void present_node(void) +{ + 80012f4: b580 push {r7, lr} + 80012f6: af00 add r7, sp, #0 + present(NODE_SENSOR_ID, S_ARDUINO_NODE,"STM Relay Board"); + 80012f8: 4b15 ldr r3, [pc, #84] ; (8001350 ) + 80012fa: 001a movs r2, r3 + 80012fc: 2111 movs r1, #17 + 80012fe: 20ff movs r0, #255 ; 0xff + 8001300: f7ff f90c bl 800051c + sendSketchInfo("Relay_STM", "1.1"); + 8001304: 4a13 ldr r2, [pc, #76] ; (8001354 ) + 8001306: 4b14 ldr r3, [pc, #80] ; (8001358 ) + 8001308: 0011 movs r1, r2 + 800130a: 0018 movs r0, r3 + 800130c: f7ff f992 bl 8000634 + present(IN_ID1, S_DOOR, "Input ID1"); + 8001310: 4b12 ldr r3, [pc, #72] ; (800135c ) + 8001312: 001a movs r2, r3 + 8001314: 2100 movs r1, #0 + 8001316: 2001 movs r0, #1 + 8001318: f7ff f900 bl 800051c + present(IN_ID2, S_DOOR, "Input ID2"); + 800131c: 4b10 ldr r3, [pc, #64] ; (8001360 ) + 800131e: 001a movs r2, r3 + 8001320: 2100 movs r1, #0 + 8001322: 2002 movs r0, #2 + 8001324: f7ff f8fa bl 800051c + present(RELAY_ID1, S_BINARY, "Relay 1"); + 8001328: 4b0e ldr r3, [pc, #56] ; (8001364 ) + 800132a: 001a movs r2, r3 + 800132c: 2103 movs r1, #3 + 800132e: 2003 movs r0, #3 + 8001330: f7ff f8f4 bl 800051c + present(RELAY_ID2, S_BINARY, "Relay 2"); + 8001334: 4b0c ldr r3, [pc, #48] ; (8001368 ) + 8001336: 001a movs r2, r3 + 8001338: 2103 movs r1, #3 + 800133a: 2004 movs r0, #4 + 800133c: f7ff f8ee bl 800051c + registerNode(); + 8001340: f7ff f92a bl 8000598 + HAL_Delay(20); + 8001344: 2014 movs r0, #20 + 8001346: f000 f9bb bl 80016c0 +} + 800134a: 46c0 nop ; (mov r8, r8) + 800134c: 46bd mov sp, r7 + 800134e: bd80 pop {r7, pc} + 8001350: 08003058 .word 0x08003058 + 8001354: 08003068 .word 0x08003068 + 8001358: 0800306c .word 0x0800306c + 800135c: 08003078 .word 0x08003078 + 8001360: 08003084 .word 0x08003084 + 8001364: 08003090 .word 0x08003090 + 8001368: 08003098 .word 0x08003098 + +0800136c : + +void receive(const MyMessage* mymsg) +{ + 800136c: b580 push {r7, lr} + 800136e: b084 sub sp, #16 + 8001370: af00 add r7, sp, #0 + 8001372: 6078 str r0, [r7, #4] + uint8_t sensor; + + // We only expect one type of message from controller. But we better check anyway. + if (mymsg->type == V_STATUS) { + 8001374: 687b ldr r3, [r7, #4] + 8001376: 795b ldrb r3, [r3, #5] + 8001378: 2b02 cmp r3, #2 + 800137a: d126 bne.n 80013ca + sensor = mymsg->sensor; + 800137c: 210f movs r1, #15 + 800137e: 187b adds r3, r7, r1 + 8001380: 687a ldr r2, [r7, #4] + 8001382: 7992 ldrb r2, [r2, #6] + 8001384: 701a strb r2, [r3, #0] + if (sensor == 3) + 8001386: 187b adds r3, r7, r1 + 8001388: 781b ldrb r3, [r3, #0] + 800138a: 2b03 cmp r3, #3 + 800138c: d10c bne.n 80013a8 + HAL_GPIO_WritePin(Relay1_GPIO_Port, Relay1_Pin, (mymsg->data[0]=='1')?SET:RESET); + 800138e: 687b ldr r3, [r7, #4] + 8001390: 79db ldrb r3, [r3, #7] + 8001392: 3b31 subs r3, #49 ; 0x31 + 8001394: 425a negs r2, r3 + 8001396: 4153 adcs r3, r2 + 8001398: b2db uxtb r3, r3 + 800139a: 001a movs r2, r3 + 800139c: 2390 movs r3, #144 ; 0x90 + 800139e: 05db lsls r3, r3, #23 + 80013a0: 2180 movs r1, #128 ; 0x80 + 80013a2: 0018 movs r0, r3 + 80013a4: f000 fc19 bl 8001bda + if (sensor == 4) + 80013a8: 230f movs r3, #15 + 80013aa: 18fb adds r3, r7, r3 + 80013ac: 781b ldrb r3, [r3, #0] + 80013ae: 2b04 cmp r3, #4 + 80013b0: d10b bne.n 80013ca + HAL_GPIO_WritePin(Relay2_GPIO_Port, Relay2_Pin, (mymsg->data[0]=='1')?SET:RESET); + 80013b2: 687b ldr r3, [r7, #4] + 80013b4: 79db ldrb r3, [r3, #7] + 80013b6: 3b31 subs r3, #49 ; 0x31 + 80013b8: 425a negs r2, r3 + 80013ba: 4153 adcs r3, r2 + 80013bc: b2db uxtb r3, r3 + 80013be: 001a movs r2, r3 + 80013c0: 4b04 ldr r3, [pc, #16] ; (80013d4 ) + 80013c2: 2102 movs r1, #2 + 80013c4: 0018 movs r0, r3 + 80013c6: f000 fc08 bl 8001bda + } +} + 80013ca: 46c0 nop ; (mov r8, r8) + 80013cc: 46bd mov sp, r7 + 80013ce: b004 add sp, #16 + 80013d0: bd80 pop {r7, pc} + 80013d2: 46c0 nop ; (mov r8, r8) + 80013d4: 48000400 .word 0x48000400 + +080013d8 : +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + 80013d8: b580 push {r7, lr} + 80013da: af00 add r7, sp, #0 + __ASM volatile ("cpsid i" : : : "memory"); + 80013dc: b672 cpsid i + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + 80013de: e7fe b.n 80013de + +080013e0 : +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + 80013e0: b580 push {r7, lr} + 80013e2: b082 sub sp, #8 + 80013e4: af00 add r7, sp, #0 + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + 80013e6: 4b0f ldr r3, [pc, #60] ; (8001424 ) + 80013e8: 699a ldr r2, [r3, #24] + 80013ea: 4b0e ldr r3, [pc, #56] ; (8001424 ) + 80013ec: 2101 movs r1, #1 + 80013ee: 430a orrs r2, r1 + 80013f0: 619a str r2, [r3, #24] + 80013f2: 4b0c ldr r3, [pc, #48] ; (8001424 ) + 80013f4: 699b ldr r3, [r3, #24] + 80013f6: 2201 movs r2, #1 + 80013f8: 4013 ands r3, r2 + 80013fa: 607b str r3, [r7, #4] + 80013fc: 687b ldr r3, [r7, #4] + __HAL_RCC_PWR_CLK_ENABLE(); + 80013fe: 4b09 ldr r3, [pc, #36] ; (8001424 ) + 8001400: 69da ldr r2, [r3, #28] + 8001402: 4b08 ldr r3, [pc, #32] ; (8001424 ) + 8001404: 2180 movs r1, #128 ; 0x80 + 8001406: 0549 lsls r1, r1, #21 + 8001408: 430a orrs r2, r1 + 800140a: 61da str r2, [r3, #28] + 800140c: 4b05 ldr r3, [pc, #20] ; (8001424 ) + 800140e: 69da ldr r2, [r3, #28] + 8001410: 2380 movs r3, #128 ; 0x80 + 8001412: 055b lsls r3, r3, #21 + 8001414: 4013 ands r3, r2 + 8001416: 603b str r3, [r7, #0] + 8001418: 683b ldr r3, [r7, #0] + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + 800141a: 46c0 nop ; (mov r8, r8) + 800141c: 46bd mov sp, r7 + 800141e: b002 add sp, #8 + 8001420: bd80 pop {r7, pc} + 8001422: 46c0 nop ; (mov r8, r8) + 8001424: 40021000 .word 0x40021000 + +08001428 : +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + 8001428: b580 push {r7, lr} + 800142a: b08a sub sp, #40 ; 0x28 + 800142c: af00 add r7, sp, #0 + 800142e: 6078 str r0, [r7, #4] + GPIO_InitTypeDef GPIO_InitStruct = {0}; + 8001430: 2314 movs r3, #20 + 8001432: 18fb adds r3, r7, r3 + 8001434: 0018 movs r0, r3 + 8001436: 2314 movs r3, #20 + 8001438: 001a movs r2, r3 + 800143a: 2100 movs r1, #0 + 800143c: f001 fd15 bl 8002e6a + if(huart->Instance==USART1) + 8001440: 687b ldr r3, [r7, #4] + 8001442: 681b ldr r3, [r3, #0] + 8001444: 4a21 ldr r2, [pc, #132] ; (80014cc ) + 8001446: 4293 cmp r3, r2 + 8001448: d13b bne.n 80014c2 + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + 800144a: 4b21 ldr r3, [pc, #132] ; (80014d0 ) + 800144c: 699a ldr r2, [r3, #24] + 800144e: 4b20 ldr r3, [pc, #128] ; (80014d0 ) + 8001450: 2180 movs r1, #128 ; 0x80 + 8001452: 01c9 lsls r1, r1, #7 + 8001454: 430a orrs r2, r1 + 8001456: 619a str r2, [r3, #24] + 8001458: 4b1d ldr r3, [pc, #116] ; (80014d0 ) + 800145a: 699a ldr r2, [r3, #24] + 800145c: 2380 movs r3, #128 ; 0x80 + 800145e: 01db lsls r3, r3, #7 + 8001460: 4013 ands r3, r2 + 8001462: 613b str r3, [r7, #16] + 8001464: 693b ldr r3, [r7, #16] + + __HAL_RCC_GPIOA_CLK_ENABLE(); + 8001466: 4b1a ldr r3, [pc, #104] ; (80014d0 ) + 8001468: 695a ldr r2, [r3, #20] + 800146a: 4b19 ldr r3, [pc, #100] ; (80014d0 ) + 800146c: 2180 movs r1, #128 ; 0x80 + 800146e: 0289 lsls r1, r1, #10 + 8001470: 430a orrs r2, r1 + 8001472: 615a str r2, [r3, #20] + 8001474: 4b16 ldr r3, [pc, #88] ; (80014d0 ) + 8001476: 695a ldr r2, [r3, #20] + 8001478: 2380 movs r3, #128 ; 0x80 + 800147a: 029b lsls r3, r3, #10 + 800147c: 4013 ands r3, r2 + 800147e: 60fb str r3, [r7, #12] + 8001480: 68fb ldr r3, [r7, #12] + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10; + 8001482: 2114 movs r1, #20 + 8001484: 187b adds r3, r7, r1 + 8001486: 22c0 movs r2, #192 ; 0xc0 + 8001488: 00d2 lsls r2, r2, #3 + 800148a: 601a str r2, [r3, #0] + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + 800148c: 187b adds r3, r7, r1 + 800148e: 2202 movs r2, #2 + 8001490: 605a str r2, [r3, #4] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 8001492: 187b adds r3, r7, r1 + 8001494: 2200 movs r2, #0 + 8001496: 609a str r2, [r3, #8] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + 8001498: 187b adds r3, r7, r1 + 800149a: 2203 movs r2, #3 + 800149c: 60da str r2, [r3, #12] + GPIO_InitStruct.Alternate = GPIO_AF1_USART1; + 800149e: 187b adds r3, r7, r1 + 80014a0: 2201 movs r2, #1 + 80014a2: 611a str r2, [r3, #16] + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 80014a4: 187a adds r2, r7, r1 + 80014a6: 2390 movs r3, #144 ; 0x90 + 80014a8: 05db lsls r3, r3, #23 + 80014aa: 0011 movs r1, r2 + 80014ac: 0018 movs r0, r3 + 80014ae: f000 fa07 bl 80018c0 + + /* USART1 interrupt Init */ + HAL_NVIC_SetPriority(USART1_IRQn, 0, 0); + 80014b2: 2200 movs r2, #0 + 80014b4: 2100 movs r1, #0 + 80014b6: 201b movs r0, #27 + 80014b8: f000 f9d0 bl 800185c + HAL_NVIC_EnableIRQ(USART1_IRQn); + 80014bc: 201b movs r0, #27 + 80014be: f000 f9e2 bl 8001886 + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + +} + 80014c2: 46c0 nop ; (mov r8, r8) + 80014c4: 46bd mov sp, r7 + 80014c6: b00a add sp, #40 ; 0x28 + 80014c8: bd80 pop {r7, pc} + 80014ca: 46c0 nop ; (mov r8, r8) + 80014cc: 40013800 .word 0x40013800 + 80014d0: 40021000 .word 0x40021000 + +080014d4 : +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + 80014d4: b580 push {r7, lr} + 80014d6: af00 add r7, sp, #0 + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + 80014d8: e7fe b.n 80014d8 + +080014da : + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + 80014da: b580 push {r7, lr} + 80014dc: af00 add r7, sp, #0 + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + 80014de: e7fe b.n 80014de + +080014e0 : + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + 80014e0: b580 push {r7, lr} + 80014e2: af00 add r7, sp, #0 + + /* USER CODE END SVC_IRQn 0 */ + /* USER CODE BEGIN SVC_IRQn 1 */ + + /* USER CODE END SVC_IRQn 1 */ +} + 80014e4: 46c0 nop ; (mov r8, r8) + 80014e6: 46bd mov sp, r7 + 80014e8: bd80 pop {r7, pc} + +080014ea : + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + 80014ea: b580 push {r7, lr} + 80014ec: af00 add r7, sp, #0 + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + 80014ee: 46c0 nop ; (mov r8, r8) + 80014f0: 46bd mov sp, r7 + 80014f2: bd80 pop {r7, pc} + +080014f4 : + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + 80014f4: b580 push {r7, lr} + 80014f6: af00 add r7, sp, #0 + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + 80014f8: f000 f8c6 bl 8001688 + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + 80014fc: 46c0 nop ; (mov r8, r8) + 80014fe: 46bd mov sp, r7 + 8001500: bd80 pop {r7, pc} + ... + +08001504 : + +/** + * @brief This function handles USART1 global interrupt. + */ +void USART1_IRQHandler(void) +{ + 8001504: b580 push {r7, lr} + 8001506: af00 add r7, sp, #0 + /* USER CODE BEGIN USART1_IRQn 0 */ + _byte = USART1->RDR; + 8001508: 4b05 ldr r3, [pc, #20] ; (8001520 ) + 800150a: 8c9b ldrh r3, [r3, #36] ; 0x24 + 800150c: b29b uxth r3, r3 + 800150e: b2da uxtb r2, r3 + 8001510: 4b04 ldr r3, [pc, #16] ; (8001524 ) + 8001512: 701a strb r2, [r3, #0] + _byte_received = 1; + 8001514: 4b04 ldr r3, [pc, #16] ; (8001528 ) + 8001516: 2201 movs r2, #1 + 8001518: 701a strb r2, [r3, #0] + return; // To avoid calling the handler at all + 800151a: 46c0 nop ; (mov r8, r8) + /* USER CODE END USART1_IRQn 0 */ + HAL_UART_IRQHandler(&huart1); + /* USER CODE BEGIN USART1_IRQn 1 */ + + /* USER CODE END USART1_IRQn 1 */ +} + 800151c: 46bd mov sp, r7 + 800151e: bd80 pop {r7, pc} + 8001520: 40013800 .word 0x40013800 + 8001524: 20000124 .word 0x20000124 + 8001528: 200000b0 .word 0x200000b0 + +0800152c <_sbrk>: + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + 800152c: b580 push {r7, lr} + 800152e: b086 sub sp, #24 + 8001530: af00 add r7, sp, #0 + 8001532: 6078 str r0, [r7, #4] + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + 8001534: 4a14 ldr r2, [pc, #80] ; (8001588 <_sbrk+0x5c>) + 8001536: 4b15 ldr r3, [pc, #84] ; (800158c <_sbrk+0x60>) + 8001538: 1ad3 subs r3, r2, r3 + 800153a: 617b str r3, [r7, #20] + const uint8_t *max_heap = (uint8_t *)stack_limit; + 800153c: 697b ldr r3, [r7, #20] + 800153e: 613b str r3, [r7, #16] + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + 8001540: 4b13 ldr r3, [pc, #76] ; (8001590 <_sbrk+0x64>) + 8001542: 681b ldr r3, [r3, #0] + 8001544: 2b00 cmp r3, #0 + 8001546: d102 bne.n 800154e <_sbrk+0x22> + { + __sbrk_heap_end = &_end; + 8001548: 4b11 ldr r3, [pc, #68] ; (8001590 <_sbrk+0x64>) + 800154a: 4a12 ldr r2, [pc, #72] ; (8001594 <_sbrk+0x68>) + 800154c: 601a str r2, [r3, #0] + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + 800154e: 4b10 ldr r3, [pc, #64] ; (8001590 <_sbrk+0x64>) + 8001550: 681a ldr r2, [r3, #0] + 8001552: 687b ldr r3, [r7, #4] + 8001554: 18d3 adds r3, r2, r3 + 8001556: 693a ldr r2, [r7, #16] + 8001558: 429a cmp r2, r3 + 800155a: d207 bcs.n 800156c <_sbrk+0x40> + { + errno = ENOMEM; + 800155c: f001 fc52 bl 8002e04 <__errno> + 8001560: 0003 movs r3, r0 + 8001562: 220c movs r2, #12 + 8001564: 601a str r2, [r3, #0] + return (void *)-1; + 8001566: 2301 movs r3, #1 + 8001568: 425b negs r3, r3 + 800156a: e009 b.n 8001580 <_sbrk+0x54> + } + + prev_heap_end = __sbrk_heap_end; + 800156c: 4b08 ldr r3, [pc, #32] ; (8001590 <_sbrk+0x64>) + 800156e: 681b ldr r3, [r3, #0] + 8001570: 60fb str r3, [r7, #12] + __sbrk_heap_end += incr; + 8001572: 4b07 ldr r3, [pc, #28] ; (8001590 <_sbrk+0x64>) + 8001574: 681a ldr r2, [r3, #0] + 8001576: 687b ldr r3, [r7, #4] + 8001578: 18d2 adds r2, r2, r3 + 800157a: 4b05 ldr r3, [pc, #20] ; (8001590 <_sbrk+0x64>) + 800157c: 601a str r2, [r3, #0] + + return (void *)prev_heap_end; + 800157e: 68fb ldr r3, [r7, #12] +} + 8001580: 0018 movs r0, r3 + 8001582: 46bd mov sp, r7 + 8001584: b006 add sp, #24 + 8001586: bd80 pop {r7, pc} + 8001588: 20001000 .word 0x20001000 + 800158c: 00000400 .word 0x00000400 + 8001590: 20000098 .word 0x20000098 + 8001594: 200001b8 .word 0x200001b8 + +08001598 : + * @brief Setup the microcontroller system + * @param None + * @retval None + */ +void SystemInit(void) +{ + 8001598: b580 push {r7, lr} + 800159a: af00 add r7, sp, #0 + before branch to main program. This call is made inside + the "startup_stm32f0xx.s" file. + User can setups the default system clock (System clock source, PLL Multiplier + and Divider factors, AHB/APBx prescalers and Flash settings). + */ +} + 800159c: 46c0 nop ; (mov r8, r8) + 800159e: 46bd mov sp, r7 + 80015a0: bd80 pop {r7, pc} + ... + +080015a4 : + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + 80015a4: 480d ldr r0, [pc, #52] ; (80015dc ) + mov sp, r0 /* set stack pointer */ + 80015a6: 4685 mov sp, r0 + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + 80015a8: 480d ldr r0, [pc, #52] ; (80015e0 ) + ldr r1, =_edata + 80015aa: 490e ldr r1, [pc, #56] ; (80015e4 ) + ldr r2, =_sidata + 80015ac: 4a0e ldr r2, [pc, #56] ; (80015e8 ) + movs r3, #0 + 80015ae: 2300 movs r3, #0 + b LoopCopyDataInit + 80015b0: e002 b.n 80015b8 + +080015b2 : + +CopyDataInit: + ldr r4, [r2, r3] + 80015b2: 58d4 ldr r4, [r2, r3] + str r4, [r0, r3] + 80015b4: 50c4 str r4, [r0, r3] + adds r3, r3, #4 + 80015b6: 3304 adds r3, #4 + +080015b8 : + +LoopCopyDataInit: + adds r4, r0, r3 + 80015b8: 18c4 adds r4, r0, r3 + cmp r4, r1 + 80015ba: 428c cmp r4, r1 + bcc CopyDataInit + 80015bc: d3f9 bcc.n 80015b2 + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + 80015be: 4a0b ldr r2, [pc, #44] ; (80015ec ) + ldr r4, =_ebss + 80015c0: 4c0b ldr r4, [pc, #44] ; (80015f0 ) + movs r3, #0 + 80015c2: 2300 movs r3, #0 + b LoopFillZerobss + 80015c4: e001 b.n 80015ca + +080015c6 : + +FillZerobss: + str r3, [r2] + 80015c6: 6013 str r3, [r2, #0] + adds r2, r2, #4 + 80015c8: 3204 adds r2, #4 + +080015ca : + +LoopFillZerobss: + cmp r2, r4 + 80015ca: 42a2 cmp r2, r4 + bcc FillZerobss + 80015cc: d3fb bcc.n 80015c6 + +/* Call the clock system intitialization function.*/ + bl SystemInit + 80015ce: f7ff ffe3 bl 8001598 +/* Call static constructors */ + bl __libc_init_array + 80015d2: f001 fc1d bl 8002e10 <__libc_init_array> +/* Call the application's entry point.*/ + bl main + 80015d6: f7ff fc27 bl 8000e28
+ +080015da : + +LoopForever: + b LoopForever + 80015da: e7fe b.n 80015da + ldr r0, =_estack + 80015dc: 20001000 .word 0x20001000 + ldr r0, =_sdata + 80015e0: 20000000 .word 0x20000000 + ldr r1, =_edata + 80015e4: 20000074 .word 0x20000074 + ldr r2, =_sidata + 80015e8: 080030f4 .word 0x080030f4 + ldr r2, =_sbss + 80015ec: 20000074 .word 0x20000074 + ldr r4, =_ebss + 80015f0: 200001b4 .word 0x200001b4 + +080015f4 : + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + 80015f4: e7fe b.n 80015f4 + ... + +080015f8 : + * In the default implementation,Systick is used as source of time base. + * The tick variable is incremented each 1ms in its ISR. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + 80015f8: b580 push {r7, lr} + 80015fa: af00 add r7, sp, #0 + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); + 80015fc: 4b07 ldr r3, [pc, #28] ; (800161c ) + 80015fe: 681a ldr r2, [r3, #0] + 8001600: 4b06 ldr r3, [pc, #24] ; (800161c ) + 8001602: 2110 movs r1, #16 + 8001604: 430a orrs r2, r1 + 8001606: 601a str r2, [r3, #0] +#endif /* PREFETCH_ENABLE */ + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + + HAL_InitTick(TICK_INT_PRIORITY); + 8001608: 2000 movs r0, #0 + 800160a: f000 f809 bl 8001620 + + /* Init the low level hardware */ + HAL_MspInit(); + 800160e: f7ff fee7 bl 80013e0 + + /* Return function status */ + return HAL_OK; + 8001612: 2300 movs r3, #0 +} + 8001614: 0018 movs r0, r3 + 8001616: 46bd mov sp, r7 + 8001618: bd80 pop {r7, pc} + 800161a: 46c0 nop ; (mov r8, r8) + 800161c: 40022000 .word 0x40022000 + +08001620 : + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + 8001620: b590 push {r4, r7, lr} + 8001622: b083 sub sp, #12 + 8001624: af00 add r7, sp, #0 + 8001626: 6078 str r0, [r7, #4] + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) + 8001628: 4b14 ldr r3, [pc, #80] ; (800167c ) + 800162a: 681c ldr r4, [r3, #0] + 800162c: 4b14 ldr r3, [pc, #80] ; (8001680 ) + 800162e: 781b ldrb r3, [r3, #0] + 8001630: 0019 movs r1, r3 + 8001632: 23fa movs r3, #250 ; 0xfa + 8001634: 0098 lsls r0, r3, #2 + 8001636: f7fe fd6f bl 8000118 <__udivsi3> + 800163a: 0003 movs r3, r0 + 800163c: 0019 movs r1, r3 + 800163e: 0020 movs r0, r4 + 8001640: f7fe fd6a bl 8000118 <__udivsi3> + 8001644: 0003 movs r3, r0 + 8001646: 0018 movs r0, r3 + 8001648: f000 f92d bl 80018a6 + 800164c: 1e03 subs r3, r0, #0 + 800164e: d001 beq.n 8001654 + { + return HAL_ERROR; + 8001650: 2301 movs r3, #1 + 8001652: e00f b.n 8001674 + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + 8001654: 687b ldr r3, [r7, #4] + 8001656: 2b03 cmp r3, #3 + 8001658: d80b bhi.n 8001672 + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + 800165a: 6879 ldr r1, [r7, #4] + 800165c: 2301 movs r3, #1 + 800165e: 425b negs r3, r3 + 8001660: 2200 movs r2, #0 + 8001662: 0018 movs r0, r3 + 8001664: f000 f8fa bl 800185c + uwTickPrio = TickPriority; + 8001668: 4b06 ldr r3, [pc, #24] ; (8001684 ) + 800166a: 687a ldr r2, [r7, #4] + 800166c: 601a str r2, [r3, #0] + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; + 800166e: 2300 movs r3, #0 + 8001670: e000 b.n 8001674 + return HAL_ERROR; + 8001672: 2301 movs r3, #1 +} + 8001674: 0018 movs r0, r3 + 8001676: 46bd mov sp, r7 + 8001678: b003 add sp, #12 + 800167a: bd90 pop {r4, r7, pc} + 800167c: 20000004 .word 0x20000004 + 8001680: 2000000c .word 0x2000000c + 8001684: 20000008 .word 0x20000008 + +08001688 : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + 8001688: b580 push {r7, lr} + 800168a: af00 add r7, sp, #0 + uwTick += uwTickFreq; + 800168c: 4b05 ldr r3, [pc, #20] ; (80016a4 ) + 800168e: 781b ldrb r3, [r3, #0] + 8001690: 001a movs r2, r3 + 8001692: 4b05 ldr r3, [pc, #20] ; (80016a8 ) + 8001694: 681b ldr r3, [r3, #0] + 8001696: 18d2 adds r2, r2, r3 + 8001698: 4b03 ldr r3, [pc, #12] ; (80016a8 ) + 800169a: 601a str r2, [r3, #0] +} + 800169c: 46c0 nop ; (mov r8, r8) + 800169e: 46bd mov sp, r7 + 80016a0: bd80 pop {r7, pc} + 80016a2: 46c0 nop ; (mov r8, r8) + 80016a4: 2000000c .word 0x2000000c + 80016a8: 200001ac .word 0x200001ac + +080016ac : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + 80016ac: b580 push {r7, lr} + 80016ae: af00 add r7, sp, #0 + return uwTick; + 80016b0: 4b02 ldr r3, [pc, #8] ; (80016bc ) + 80016b2: 681b ldr r3, [r3, #0] +} + 80016b4: 0018 movs r0, r3 + 80016b6: 46bd mov sp, r7 + 80016b8: bd80 pop {r7, pc} + 80016ba: 46c0 nop ; (mov r8, r8) + 80016bc: 200001ac .word 0x200001ac + +080016c0 : + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + 80016c0: b580 push {r7, lr} + 80016c2: b084 sub sp, #16 + 80016c4: af00 add r7, sp, #0 + 80016c6: 6078 str r0, [r7, #4] + uint32_t tickstart = HAL_GetTick(); + 80016c8: f7ff fff0 bl 80016ac + 80016cc: 0003 movs r3, r0 + 80016ce: 60bb str r3, [r7, #8] + uint32_t wait = Delay; + 80016d0: 687b ldr r3, [r7, #4] + 80016d2: 60fb str r3, [r7, #12] + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + 80016d4: 68fb ldr r3, [r7, #12] + 80016d6: 3301 adds r3, #1 + 80016d8: d005 beq.n 80016e6 + { + wait += (uint32_t)(uwTickFreq); + 80016da: 4b09 ldr r3, [pc, #36] ; (8001700 ) + 80016dc: 781b ldrb r3, [r3, #0] + 80016de: 001a movs r2, r3 + 80016e0: 68fb ldr r3, [r7, #12] + 80016e2: 189b adds r3, r3, r2 + 80016e4: 60fb str r3, [r7, #12] + } + + while((HAL_GetTick() - tickstart) < wait) + 80016e6: 46c0 nop ; (mov r8, r8) + 80016e8: f7ff ffe0 bl 80016ac + 80016ec: 0002 movs r2, r0 + 80016ee: 68bb ldr r3, [r7, #8] + 80016f0: 1ad3 subs r3, r2, r3 + 80016f2: 68fa ldr r2, [r7, #12] + 80016f4: 429a cmp r2, r3 + 80016f6: d8f7 bhi.n 80016e8 + { + } +} + 80016f8: 46c0 nop ; (mov r8, r8) + 80016fa: 46bd mov sp, r7 + 80016fc: b004 add sp, #16 + 80016fe: bd80 pop {r7, pc} + 8001700: 2000000c .word 0x2000000c + +08001704 <__NVIC_EnableIRQ>: +{ + 8001704: b580 push {r7, lr} + 8001706: b082 sub sp, #8 + 8001708: af00 add r7, sp, #0 + 800170a: 0002 movs r2, r0 + 800170c: 1dfb adds r3, r7, #7 + 800170e: 701a strb r2, [r3, #0] + if ((int32_t)(IRQn) >= 0) + 8001710: 1dfb adds r3, r7, #7 + 8001712: 781b ldrb r3, [r3, #0] + 8001714: 2b7f cmp r3, #127 ; 0x7f + 8001716: d809 bhi.n 800172c <__NVIC_EnableIRQ+0x28> + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + 8001718: 1dfb adds r3, r7, #7 + 800171a: 781b ldrb r3, [r3, #0] + 800171c: 001a movs r2, r3 + 800171e: 231f movs r3, #31 + 8001720: 401a ands r2, r3 + 8001722: 4b04 ldr r3, [pc, #16] ; (8001734 <__NVIC_EnableIRQ+0x30>) + 8001724: 2101 movs r1, #1 + 8001726: 4091 lsls r1, r2 + 8001728: 000a movs r2, r1 + 800172a: 601a str r2, [r3, #0] +} + 800172c: 46c0 nop ; (mov r8, r8) + 800172e: 46bd mov sp, r7 + 8001730: b002 add sp, #8 + 8001732: bd80 pop {r7, pc} + 8001734: e000e100 .word 0xe000e100 + +08001738 <__NVIC_SetPriority>: +{ + 8001738: b590 push {r4, r7, lr} + 800173a: b083 sub sp, #12 + 800173c: af00 add r7, sp, #0 + 800173e: 0002 movs r2, r0 + 8001740: 6039 str r1, [r7, #0] + 8001742: 1dfb adds r3, r7, #7 + 8001744: 701a strb r2, [r3, #0] + if ((int32_t)(IRQn) >= 0) + 8001746: 1dfb adds r3, r7, #7 + 8001748: 781b ldrb r3, [r3, #0] + 800174a: 2b7f cmp r3, #127 ; 0x7f + 800174c: d828 bhi.n 80017a0 <__NVIC_SetPriority+0x68> + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 800174e: 4a2f ldr r2, [pc, #188] ; (800180c <__NVIC_SetPriority+0xd4>) + 8001750: 1dfb adds r3, r7, #7 + 8001752: 781b ldrb r3, [r3, #0] + 8001754: b25b sxtb r3, r3 + 8001756: 089b lsrs r3, r3, #2 + 8001758: 33c0 adds r3, #192 ; 0xc0 + 800175a: 009b lsls r3, r3, #2 + 800175c: 589b ldr r3, [r3, r2] + 800175e: 1dfa adds r2, r7, #7 + 8001760: 7812 ldrb r2, [r2, #0] + 8001762: 0011 movs r1, r2 + 8001764: 2203 movs r2, #3 + 8001766: 400a ands r2, r1 + 8001768: 00d2 lsls r2, r2, #3 + 800176a: 21ff movs r1, #255 ; 0xff + 800176c: 4091 lsls r1, r2 + 800176e: 000a movs r2, r1 + 8001770: 43d2 mvns r2, r2 + 8001772: 401a ands r2, r3 + 8001774: 0011 movs r1, r2 + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + 8001776: 683b ldr r3, [r7, #0] + 8001778: 019b lsls r3, r3, #6 + 800177a: 22ff movs r2, #255 ; 0xff + 800177c: 401a ands r2, r3 + 800177e: 1dfb adds r3, r7, #7 + 8001780: 781b ldrb r3, [r3, #0] + 8001782: 0018 movs r0, r3 + 8001784: 2303 movs r3, #3 + 8001786: 4003 ands r3, r0 + 8001788: 00db lsls r3, r3, #3 + 800178a: 409a lsls r2, r3 + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 800178c: 481f ldr r0, [pc, #124] ; (800180c <__NVIC_SetPriority+0xd4>) + 800178e: 1dfb adds r3, r7, #7 + 8001790: 781b ldrb r3, [r3, #0] + 8001792: b25b sxtb r3, r3 + 8001794: 089b lsrs r3, r3, #2 + 8001796: 430a orrs r2, r1 + 8001798: 33c0 adds r3, #192 ; 0xc0 + 800179a: 009b lsls r3, r3, #2 + 800179c: 501a str r2, [r3, r0] +} + 800179e: e031 b.n 8001804 <__NVIC_SetPriority+0xcc> + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 80017a0: 4a1b ldr r2, [pc, #108] ; (8001810 <__NVIC_SetPriority+0xd8>) + 80017a2: 1dfb adds r3, r7, #7 + 80017a4: 781b ldrb r3, [r3, #0] + 80017a6: 0019 movs r1, r3 + 80017a8: 230f movs r3, #15 + 80017aa: 400b ands r3, r1 + 80017ac: 3b08 subs r3, #8 + 80017ae: 089b lsrs r3, r3, #2 + 80017b0: 3306 adds r3, #6 + 80017b2: 009b lsls r3, r3, #2 + 80017b4: 18d3 adds r3, r2, r3 + 80017b6: 3304 adds r3, #4 + 80017b8: 681b ldr r3, [r3, #0] + 80017ba: 1dfa adds r2, r7, #7 + 80017bc: 7812 ldrb r2, [r2, #0] + 80017be: 0011 movs r1, r2 + 80017c0: 2203 movs r2, #3 + 80017c2: 400a ands r2, r1 + 80017c4: 00d2 lsls r2, r2, #3 + 80017c6: 21ff movs r1, #255 ; 0xff + 80017c8: 4091 lsls r1, r2 + 80017ca: 000a movs r2, r1 + 80017cc: 43d2 mvns r2, r2 + 80017ce: 401a ands r2, r3 + 80017d0: 0011 movs r1, r2 + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + 80017d2: 683b ldr r3, [r7, #0] + 80017d4: 019b lsls r3, r3, #6 + 80017d6: 22ff movs r2, #255 ; 0xff + 80017d8: 401a ands r2, r3 + 80017da: 1dfb adds r3, r7, #7 + 80017dc: 781b ldrb r3, [r3, #0] + 80017de: 0018 movs r0, r3 + 80017e0: 2303 movs r3, #3 + 80017e2: 4003 ands r3, r0 + 80017e4: 00db lsls r3, r3, #3 + 80017e6: 409a lsls r2, r3 + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + 80017e8: 4809 ldr r0, [pc, #36] ; (8001810 <__NVIC_SetPriority+0xd8>) + 80017ea: 1dfb adds r3, r7, #7 + 80017ec: 781b ldrb r3, [r3, #0] + 80017ee: 001c movs r4, r3 + 80017f0: 230f movs r3, #15 + 80017f2: 4023 ands r3, r4 + 80017f4: 3b08 subs r3, #8 + 80017f6: 089b lsrs r3, r3, #2 + 80017f8: 430a orrs r2, r1 + 80017fa: 3306 adds r3, #6 + 80017fc: 009b lsls r3, r3, #2 + 80017fe: 18c3 adds r3, r0, r3 + 8001800: 3304 adds r3, #4 + 8001802: 601a str r2, [r3, #0] +} + 8001804: 46c0 nop ; (mov r8, r8) + 8001806: 46bd mov sp, r7 + 8001808: b003 add sp, #12 + 800180a: bd90 pop {r4, r7, pc} + 800180c: e000e100 .word 0xe000e100 + 8001810: e000ed00 .word 0xe000ed00 + +08001814 : + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + 8001814: b580 push {r7, lr} + 8001816: b082 sub sp, #8 + 8001818: af00 add r7, sp, #0 + 800181a: 6078 str r0, [r7, #4] + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + 800181c: 687b ldr r3, [r7, #4] + 800181e: 3b01 subs r3, #1 + 8001820: 4a0c ldr r2, [pc, #48] ; (8001854 ) + 8001822: 4293 cmp r3, r2 + 8001824: d901 bls.n 800182a + { + return (1UL); /* Reload value impossible */ + 8001826: 2301 movs r3, #1 + 8001828: e010 b.n 800184c + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + 800182a: 4b0b ldr r3, [pc, #44] ; (8001858 ) + 800182c: 687a ldr r2, [r7, #4] + 800182e: 3a01 subs r2, #1 + 8001830: 605a str r2, [r3, #4] + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + 8001832: 2301 movs r3, #1 + 8001834: 425b negs r3, r3 + 8001836: 2103 movs r1, #3 + 8001838: 0018 movs r0, r3 + 800183a: f7ff ff7d bl 8001738 <__NVIC_SetPriority> + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + 800183e: 4b06 ldr r3, [pc, #24] ; (8001858 ) + 8001840: 2200 movs r2, #0 + 8001842: 609a str r2, [r3, #8] + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + 8001844: 4b04 ldr r3, [pc, #16] ; (8001858 ) + 8001846: 2207 movs r2, #7 + 8001848: 601a str r2, [r3, #0] + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ + 800184a: 2300 movs r3, #0 +} + 800184c: 0018 movs r0, r3 + 800184e: 46bd mov sp, r7 + 8001850: b002 add sp, #8 + 8001852: bd80 pop {r7, pc} + 8001854: 00ffffff .word 0x00ffffff + 8001858: e000e010 .word 0xe000e010 + +0800185c : + * with stm32f0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0 based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + 800185c: b580 push {r7, lr} + 800185e: b084 sub sp, #16 + 8001860: af00 add r7, sp, #0 + 8001862: 60b9 str r1, [r7, #8] + 8001864: 607a str r2, [r7, #4] + 8001866: 210f movs r1, #15 + 8001868: 187b adds r3, r7, r1 + 800186a: 1c02 adds r2, r0, #0 + 800186c: 701a strb r2, [r3, #0] + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn,PreemptPriority); + 800186e: 68ba ldr r2, [r7, #8] + 8001870: 187b adds r3, r7, r1 + 8001872: 781b ldrb r3, [r3, #0] + 8001874: b25b sxtb r3, r3 + 8001876: 0011 movs r1, r2 + 8001878: 0018 movs r0, r3 + 800187a: f7ff ff5d bl 8001738 <__NVIC_SetPriority> +} + 800187e: 46c0 nop ; (mov r8, r8) + 8001880: 46bd mov sp, r7 + 8001882: b004 add sp, #16 + 8001884: bd80 pop {r7, pc} + +08001886 : + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + 8001886: b580 push {r7, lr} + 8001888: b082 sub sp, #8 + 800188a: af00 add r7, sp, #0 + 800188c: 0002 movs r2, r0 + 800188e: 1dfb adds r3, r7, #7 + 8001890: 701a strb r2, [r3, #0] + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); + 8001892: 1dfb adds r3, r7, #7 + 8001894: 781b ldrb r3, [r3, #0] + 8001896: b25b sxtb r3, r3 + 8001898: 0018 movs r0, r3 + 800189a: f7ff ff33 bl 8001704 <__NVIC_EnableIRQ> +} + 800189e: 46c0 nop ; (mov r8, r8) + 80018a0: 46bd mov sp, r7 + 80018a2: b002 add sp, #8 + 80018a4: bd80 pop {r7, pc} + +080018a6 : + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + 80018a6: b580 push {r7, lr} + 80018a8: b082 sub sp, #8 + 80018aa: af00 add r7, sp, #0 + 80018ac: 6078 str r0, [r7, #4] + return SysTick_Config(TicksNumb); + 80018ae: 687b ldr r3, [r7, #4] + 80018b0: 0018 movs r0, r3 + 80018b2: f7ff ffaf bl 8001814 + 80018b6: 0003 movs r3, r0 +} + 80018b8: 0018 movs r0, r3 + 80018ba: 46bd mov sp, r7 + 80018bc: b002 add sp, #8 + 80018be: bd80 pop {r7, pc} + +080018c0 : + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + 80018c0: b580 push {r7, lr} + 80018c2: b086 sub sp, #24 + 80018c4: af00 add r7, sp, #0 + 80018c6: 6078 str r0, [r7, #4] + 80018c8: 6039 str r1, [r7, #0] + uint32_t position = 0x00u; + 80018ca: 2300 movs r3, #0 + 80018cc: 617b str r3, [r7, #20] + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + 80018ce: e14f b.n 8001b70 + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + 80018d0: 683b ldr r3, [r7, #0] + 80018d2: 681b ldr r3, [r3, #0] + 80018d4: 2101 movs r1, #1 + 80018d6: 697a ldr r2, [r7, #20] + 80018d8: 4091 lsls r1, r2 + 80018da: 000a movs r2, r1 + 80018dc: 4013 ands r3, r2 + 80018de: 60fb str r3, [r7, #12] + + if (iocurrent != 0x00u) + 80018e0: 68fb ldr r3, [r7, #12] + 80018e2: 2b00 cmp r3, #0 + 80018e4: d100 bne.n 80018e8 + 80018e6: e140 b.n 8001b6a + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + 80018e8: 683b ldr r3, [r7, #0] + 80018ea: 685b ldr r3, [r3, #4] + 80018ec: 2b01 cmp r3, #1 + 80018ee: d00b beq.n 8001908 + 80018f0: 683b ldr r3, [r7, #0] + 80018f2: 685b ldr r3, [r3, #4] + 80018f4: 2b02 cmp r3, #2 + 80018f6: d007 beq.n 8001908 + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + 80018f8: 683b ldr r3, [r7, #0] + 80018fa: 685b ldr r3, [r3, #4] + if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + 80018fc: 2b11 cmp r3, #17 + 80018fe: d003 beq.n 8001908 + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + 8001900: 683b ldr r3, [r7, #0] + 8001902: 685b ldr r3, [r3, #4] + 8001904: 2b12 cmp r3, #18 + 8001906: d130 bne.n 800196a + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + 8001908: 687b ldr r3, [r7, #4] + 800190a: 689b ldr r3, [r3, #8] + 800190c: 613b str r3, [r7, #16] + temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u)); + 800190e: 697b ldr r3, [r7, #20] + 8001910: 005b lsls r3, r3, #1 + 8001912: 2203 movs r2, #3 + 8001914: 409a lsls r2, r3 + 8001916: 0013 movs r3, r2 + 8001918: 43da mvns r2, r3 + 800191a: 693b ldr r3, [r7, #16] + 800191c: 4013 ands r3, r2 + 800191e: 613b str r3, [r7, #16] + temp |= (GPIO_Init->Speed << (position * 2u)); + 8001920: 683b ldr r3, [r7, #0] + 8001922: 68da ldr r2, [r3, #12] + 8001924: 697b ldr r3, [r7, #20] + 8001926: 005b lsls r3, r3, #1 + 8001928: 409a lsls r2, r3 + 800192a: 0013 movs r3, r2 + 800192c: 693a ldr r2, [r7, #16] + 800192e: 4313 orrs r3, r2 + 8001930: 613b str r3, [r7, #16] + GPIOx->OSPEEDR = temp; + 8001932: 687b ldr r3, [r7, #4] + 8001934: 693a ldr r2, [r7, #16] + 8001936: 609a str r2, [r3, #8] + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + 8001938: 687b ldr r3, [r7, #4] + 800193a: 685b ldr r3, [r3, #4] + 800193c: 613b str r3, [r7, #16] + temp &= ~(GPIO_OTYPER_OT_0 << position) ; + 800193e: 2201 movs r2, #1 + 8001940: 697b ldr r3, [r7, #20] + 8001942: 409a lsls r2, r3 + 8001944: 0013 movs r3, r2 + 8001946: 43da mvns r2, r3 + 8001948: 693b ldr r3, [r7, #16] + 800194a: 4013 ands r3, r2 + 800194c: 613b str r3, [r7, #16] + temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position); + 800194e: 683b ldr r3, [r7, #0] + 8001950: 685b ldr r3, [r3, #4] + 8001952: 091b lsrs r3, r3, #4 + 8001954: 2201 movs r2, #1 + 8001956: 401a ands r2, r3 + 8001958: 697b ldr r3, [r7, #20] + 800195a: 409a lsls r2, r3 + 800195c: 0013 movs r3, r2 + 800195e: 693a ldr r2, [r7, #16] + 8001960: 4313 orrs r3, r2 + 8001962: 613b str r3, [r7, #16] + GPIOx->OTYPER = temp; + 8001964: 687b ldr r3, [r7, #4] + 8001966: 693a ldr r2, [r7, #16] + 8001968: 605a str r2, [r3, #4] + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + 800196a: 687b ldr r3, [r7, #4] + 800196c: 68db ldr r3, [r3, #12] + 800196e: 613b str r3, [r7, #16] + temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u)); + 8001970: 697b ldr r3, [r7, #20] + 8001972: 005b lsls r3, r3, #1 + 8001974: 2203 movs r2, #3 + 8001976: 409a lsls r2, r3 + 8001978: 0013 movs r3, r2 + 800197a: 43da mvns r2, r3 + 800197c: 693b ldr r3, [r7, #16] + 800197e: 4013 ands r3, r2 + 8001980: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Pull) << (position * 2u)); + 8001982: 683b ldr r3, [r7, #0] + 8001984: 689a ldr r2, [r3, #8] + 8001986: 697b ldr r3, [r7, #20] + 8001988: 005b lsls r3, r3, #1 + 800198a: 409a lsls r2, r3 + 800198c: 0013 movs r3, r2 + 800198e: 693a ldr r2, [r7, #16] + 8001990: 4313 orrs r3, r2 + 8001992: 613b str r3, [r7, #16] + GPIOx->PUPDR = temp; + 8001994: 687b ldr r3, [r7, #4] + 8001996: 693a ldr r2, [r7, #16] + 8001998: 60da str r2, [r3, #12] + + /* In case of Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + 800199a: 683b ldr r3, [r7, #0] + 800199c: 685b ldr r3, [r3, #4] + 800199e: 2b02 cmp r3, #2 + 80019a0: d003 beq.n 80019aa + 80019a2: 683b ldr r3, [r7, #0] + 80019a4: 685b ldr r3, [r3, #4] + 80019a6: 2b12 cmp r3, #18 + 80019a8: d123 bne.n 80019f2 + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + 80019aa: 697b ldr r3, [r7, #20] + 80019ac: 08da lsrs r2, r3, #3 + 80019ae: 687b ldr r3, [r7, #4] + 80019b0: 3208 adds r2, #8 + 80019b2: 0092 lsls r2, r2, #2 + 80019b4: 58d3 ldr r3, [r2, r3] + 80019b6: 613b str r3, [r7, #16] + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + 80019b8: 697b ldr r3, [r7, #20] + 80019ba: 2207 movs r2, #7 + 80019bc: 4013 ands r3, r2 + 80019be: 009b lsls r3, r3, #2 + 80019c0: 220f movs r2, #15 + 80019c2: 409a lsls r2, r3 + 80019c4: 0013 movs r3, r2 + 80019c6: 43da mvns r2, r3 + 80019c8: 693b ldr r3, [r7, #16] + 80019ca: 4013 ands r3, r2 + 80019cc: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + 80019ce: 683b ldr r3, [r7, #0] + 80019d0: 691a ldr r2, [r3, #16] + 80019d2: 697b ldr r3, [r7, #20] + 80019d4: 2107 movs r1, #7 + 80019d6: 400b ands r3, r1 + 80019d8: 009b lsls r3, r3, #2 + 80019da: 409a lsls r2, r3 + 80019dc: 0013 movs r3, r2 + 80019de: 693a ldr r2, [r7, #16] + 80019e0: 4313 orrs r3, r2 + 80019e2: 613b str r3, [r7, #16] + GPIOx->AFR[position >> 3u] = temp; + 80019e4: 697b ldr r3, [r7, #20] + 80019e6: 08da lsrs r2, r3, #3 + 80019e8: 687b ldr r3, [r7, #4] + 80019ea: 3208 adds r2, #8 + 80019ec: 0092 lsls r2, r2, #2 + 80019ee: 6939 ldr r1, [r7, #16] + 80019f0: 50d1 str r1, [r2, r3] + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + 80019f2: 687b ldr r3, [r7, #4] + 80019f4: 681b ldr r3, [r3, #0] + 80019f6: 613b str r3, [r7, #16] + temp &= ~(GPIO_MODER_MODER0 << (position * 2u)); + 80019f8: 697b ldr r3, [r7, #20] + 80019fa: 005b lsls r3, r3, #1 + 80019fc: 2203 movs r2, #3 + 80019fe: 409a lsls r2, r3 + 8001a00: 0013 movs r3, r2 + 8001a02: 43da mvns r2, r3 + 8001a04: 693b ldr r3, [r7, #16] + 8001a06: 4013 ands r3, r2 + 8001a08: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + 8001a0a: 683b ldr r3, [r7, #0] + 8001a0c: 685b ldr r3, [r3, #4] + 8001a0e: 2203 movs r2, #3 + 8001a10: 401a ands r2, r3 + 8001a12: 697b ldr r3, [r7, #20] + 8001a14: 005b lsls r3, r3, #1 + 8001a16: 409a lsls r2, r3 + 8001a18: 0013 movs r3, r2 + 8001a1a: 693a ldr r2, [r7, #16] + 8001a1c: 4313 orrs r3, r2 + 8001a1e: 613b str r3, [r7, #16] + GPIOx->MODER = temp; + 8001a20: 687b ldr r3, [r7, #4] + 8001a22: 693a ldr r2, [r7, #16] + 8001a24: 601a str r2, [r3, #0] + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + 8001a26: 683b ldr r3, [r7, #0] + 8001a28: 685a ldr r2, [r3, #4] + 8001a2a: 2380 movs r3, #128 ; 0x80 + 8001a2c: 055b lsls r3, r3, #21 + 8001a2e: 4013 ands r3, r2 + 8001a30: d100 bne.n 8001a34 + 8001a32: e09a b.n 8001b6a + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + 8001a34: 4b54 ldr r3, [pc, #336] ; (8001b88 ) + 8001a36: 699a ldr r2, [r3, #24] + 8001a38: 4b53 ldr r3, [pc, #332] ; (8001b88 ) + 8001a3a: 2101 movs r1, #1 + 8001a3c: 430a orrs r2, r1 + 8001a3e: 619a str r2, [r3, #24] + 8001a40: 4b51 ldr r3, [pc, #324] ; (8001b88 ) + 8001a42: 699b ldr r3, [r3, #24] + 8001a44: 2201 movs r2, #1 + 8001a46: 4013 ands r3, r2 + 8001a48: 60bb str r3, [r7, #8] + 8001a4a: 68bb ldr r3, [r7, #8] + + temp = SYSCFG->EXTICR[position >> 2u]; + 8001a4c: 4a4f ldr r2, [pc, #316] ; (8001b8c ) + 8001a4e: 697b ldr r3, [r7, #20] + 8001a50: 089b lsrs r3, r3, #2 + 8001a52: 3302 adds r3, #2 + 8001a54: 009b lsls r3, r3, #2 + 8001a56: 589b ldr r3, [r3, r2] + 8001a58: 613b str r3, [r7, #16] + temp &= ~(0x0FuL << (4u * (position & 0x03u))); + 8001a5a: 697b ldr r3, [r7, #20] + 8001a5c: 2203 movs r2, #3 + 8001a5e: 4013 ands r3, r2 + 8001a60: 009b lsls r3, r3, #2 + 8001a62: 220f movs r2, #15 + 8001a64: 409a lsls r2, r3 + 8001a66: 0013 movs r3, r2 + 8001a68: 43da mvns r2, r3 + 8001a6a: 693b ldr r3, [r7, #16] + 8001a6c: 4013 ands r3, r2 + 8001a6e: 613b str r3, [r7, #16] + temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); + 8001a70: 687a ldr r2, [r7, #4] + 8001a72: 2390 movs r3, #144 ; 0x90 + 8001a74: 05db lsls r3, r3, #23 + 8001a76: 429a cmp r2, r3 + 8001a78: d013 beq.n 8001aa2 + 8001a7a: 687b ldr r3, [r7, #4] + 8001a7c: 4a44 ldr r2, [pc, #272] ; (8001b90 ) + 8001a7e: 4293 cmp r3, r2 + 8001a80: d00d beq.n 8001a9e + 8001a82: 687b ldr r3, [r7, #4] + 8001a84: 4a43 ldr r2, [pc, #268] ; (8001b94 ) + 8001a86: 4293 cmp r3, r2 + 8001a88: d007 beq.n 8001a9a + 8001a8a: 687b ldr r3, [r7, #4] + 8001a8c: 4a42 ldr r2, [pc, #264] ; (8001b98 ) + 8001a8e: 4293 cmp r3, r2 + 8001a90: d101 bne.n 8001a96 + 8001a92: 2303 movs r3, #3 + 8001a94: e006 b.n 8001aa4 + 8001a96: 2305 movs r3, #5 + 8001a98: e004 b.n 8001aa4 + 8001a9a: 2302 movs r3, #2 + 8001a9c: e002 b.n 8001aa4 + 8001a9e: 2301 movs r3, #1 + 8001aa0: e000 b.n 8001aa4 + 8001aa2: 2300 movs r3, #0 + 8001aa4: 697a ldr r2, [r7, #20] + 8001aa6: 2103 movs r1, #3 + 8001aa8: 400a ands r2, r1 + 8001aaa: 0092 lsls r2, r2, #2 + 8001aac: 4093 lsls r3, r2 + 8001aae: 693a ldr r2, [r7, #16] + 8001ab0: 4313 orrs r3, r2 + 8001ab2: 613b str r3, [r7, #16] + SYSCFG->EXTICR[position >> 2u] = temp; + 8001ab4: 4935 ldr r1, [pc, #212] ; (8001b8c ) + 8001ab6: 697b ldr r3, [r7, #20] + 8001ab8: 089b lsrs r3, r3, #2 + 8001aba: 3302 adds r3, #2 + 8001abc: 009b lsls r3, r3, #2 + 8001abe: 693a ldr r2, [r7, #16] + 8001ac0: 505a str r2, [r3, r1] + + /* Clear EXTI line configuration */ + temp = EXTI->IMR; + 8001ac2: 4b36 ldr r3, [pc, #216] ; (8001b9c ) + 8001ac4: 681b ldr r3, [r3, #0] + 8001ac6: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 8001ac8: 68fb ldr r3, [r7, #12] + 8001aca: 43da mvns r2, r3 + 8001acc: 693b ldr r3, [r7, #16] + 8001ace: 4013 ands r3, r2 + 8001ad0: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + 8001ad2: 683b ldr r3, [r7, #0] + 8001ad4: 685a ldr r2, [r3, #4] + 8001ad6: 2380 movs r3, #128 ; 0x80 + 8001ad8: 025b lsls r3, r3, #9 + 8001ada: 4013 ands r3, r2 + 8001adc: d003 beq.n 8001ae6 + { + temp |= iocurrent; + 8001ade: 693a ldr r2, [r7, #16] + 8001ae0: 68fb ldr r3, [r7, #12] + 8001ae2: 4313 orrs r3, r2 + 8001ae4: 613b str r3, [r7, #16] + } + EXTI->IMR = temp; + 8001ae6: 4b2d ldr r3, [pc, #180] ; (8001b9c ) + 8001ae8: 693a ldr r2, [r7, #16] + 8001aea: 601a str r2, [r3, #0] + + temp = EXTI->EMR; + 8001aec: 4b2b ldr r3, [pc, #172] ; (8001b9c ) + 8001aee: 685b ldr r3, [r3, #4] + 8001af0: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 8001af2: 68fb ldr r3, [r7, #12] + 8001af4: 43da mvns r2, r3 + 8001af6: 693b ldr r3, [r7, #16] + 8001af8: 4013 ands r3, r2 + 8001afa: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + 8001afc: 683b ldr r3, [r7, #0] + 8001afe: 685a ldr r2, [r3, #4] + 8001b00: 2380 movs r3, #128 ; 0x80 + 8001b02: 029b lsls r3, r3, #10 + 8001b04: 4013 ands r3, r2 + 8001b06: d003 beq.n 8001b10 + { + temp |= iocurrent; + 8001b08: 693a ldr r2, [r7, #16] + 8001b0a: 68fb ldr r3, [r7, #12] + 8001b0c: 4313 orrs r3, r2 + 8001b0e: 613b str r3, [r7, #16] + } + EXTI->EMR = temp; + 8001b10: 4b22 ldr r3, [pc, #136] ; (8001b9c ) + 8001b12: 693a ldr r2, [r7, #16] + 8001b14: 605a str r2, [r3, #4] + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR; + 8001b16: 4b21 ldr r3, [pc, #132] ; (8001b9c ) + 8001b18: 689b ldr r3, [r3, #8] + 8001b1a: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 8001b1c: 68fb ldr r3, [r7, #12] + 8001b1e: 43da mvns r2, r3 + 8001b20: 693b ldr r3, [r7, #16] + 8001b22: 4013 ands r3, r2 + 8001b24: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + 8001b26: 683b ldr r3, [r7, #0] + 8001b28: 685a ldr r2, [r3, #4] + 8001b2a: 2380 movs r3, #128 ; 0x80 + 8001b2c: 035b lsls r3, r3, #13 + 8001b2e: 4013 ands r3, r2 + 8001b30: d003 beq.n 8001b3a + { + temp |= iocurrent; + 8001b32: 693a ldr r2, [r7, #16] + 8001b34: 68fb ldr r3, [r7, #12] + 8001b36: 4313 orrs r3, r2 + 8001b38: 613b str r3, [r7, #16] + } + EXTI->RTSR = temp; + 8001b3a: 4b18 ldr r3, [pc, #96] ; (8001b9c ) + 8001b3c: 693a ldr r2, [r7, #16] + 8001b3e: 609a str r2, [r3, #8] + + temp = EXTI->FTSR; + 8001b40: 4b16 ldr r3, [pc, #88] ; (8001b9c ) + 8001b42: 68db ldr r3, [r3, #12] + 8001b44: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 8001b46: 68fb ldr r3, [r7, #12] + 8001b48: 43da mvns r2, r3 + 8001b4a: 693b ldr r3, [r7, #16] + 8001b4c: 4013 ands r3, r2 + 8001b4e: 613b str r3, [r7, #16] + if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + 8001b50: 683b ldr r3, [r7, #0] + 8001b52: 685a ldr r2, [r3, #4] + 8001b54: 2380 movs r3, #128 ; 0x80 + 8001b56: 039b lsls r3, r3, #14 + 8001b58: 4013 ands r3, r2 + 8001b5a: d003 beq.n 8001b64 + { + temp |= iocurrent; + 8001b5c: 693a ldr r2, [r7, #16] + 8001b5e: 68fb ldr r3, [r7, #12] + 8001b60: 4313 orrs r3, r2 + 8001b62: 613b str r3, [r7, #16] + } + EXTI->FTSR = temp; + 8001b64: 4b0d ldr r3, [pc, #52] ; (8001b9c ) + 8001b66: 693a ldr r2, [r7, #16] + 8001b68: 60da str r2, [r3, #12] + } + } + + position++; + 8001b6a: 697b ldr r3, [r7, #20] + 8001b6c: 3301 adds r3, #1 + 8001b6e: 617b str r3, [r7, #20] + while (((GPIO_Init->Pin) >> position) != 0x00u) + 8001b70: 683b ldr r3, [r7, #0] + 8001b72: 681a ldr r2, [r3, #0] + 8001b74: 697b ldr r3, [r7, #20] + 8001b76: 40da lsrs r2, r3 + 8001b78: 1e13 subs r3, r2, #0 + 8001b7a: d000 beq.n 8001b7e + 8001b7c: e6a8 b.n 80018d0 + } +} + 8001b7e: 46c0 nop ; (mov r8, r8) + 8001b80: 46bd mov sp, r7 + 8001b82: b006 add sp, #24 + 8001b84: bd80 pop {r7, pc} + 8001b86: 46c0 nop ; (mov r8, r8) + 8001b88: 40021000 .word 0x40021000 + 8001b8c: 40010000 .word 0x40010000 + 8001b90: 48000400 .word 0x48000400 + 8001b94: 48000800 .word 0x48000800 + 8001b98: 48000c00 .word 0x48000c00 + 8001b9c: 40010400 .word 0x40010400 + +08001ba0 : + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + 8001ba0: b580 push {r7, lr} + 8001ba2: b084 sub sp, #16 + 8001ba4: af00 add r7, sp, #0 + 8001ba6: 6078 str r0, [r7, #4] + 8001ba8: 000a movs r2, r1 + 8001baa: 1cbb adds r3, r7, #2 + 8001bac: 801a strh r2, [r3, #0] + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + 8001bae: 687b ldr r3, [r7, #4] + 8001bb0: 691b ldr r3, [r3, #16] + 8001bb2: 1cba adds r2, r7, #2 + 8001bb4: 8812 ldrh r2, [r2, #0] + 8001bb6: 4013 ands r3, r2 + 8001bb8: d004 beq.n 8001bc4 + { + bitstatus = GPIO_PIN_SET; + 8001bba: 230f movs r3, #15 + 8001bbc: 18fb adds r3, r7, r3 + 8001bbe: 2201 movs r2, #1 + 8001bc0: 701a strb r2, [r3, #0] + 8001bc2: e003 b.n 8001bcc + } + else + { + bitstatus = GPIO_PIN_RESET; + 8001bc4: 230f movs r3, #15 + 8001bc6: 18fb adds r3, r7, r3 + 8001bc8: 2200 movs r2, #0 + 8001bca: 701a strb r2, [r3, #0] + } + return bitstatus; + 8001bcc: 230f movs r3, #15 + 8001bce: 18fb adds r3, r7, r3 + 8001bd0: 781b ldrb r3, [r3, #0] + } + 8001bd2: 0018 movs r0, r3 + 8001bd4: 46bd mov sp, r7 + 8001bd6: b004 add sp, #16 + 8001bd8: bd80 pop {r7, pc} + +08001bda : + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + 8001bda: b580 push {r7, lr} + 8001bdc: b082 sub sp, #8 + 8001bde: af00 add r7, sp, #0 + 8001be0: 6078 str r0, [r7, #4] + 8001be2: 0008 movs r0, r1 + 8001be4: 0011 movs r1, r2 + 8001be6: 1cbb adds r3, r7, #2 + 8001be8: 1c02 adds r2, r0, #0 + 8001bea: 801a strh r2, [r3, #0] + 8001bec: 1c7b adds r3, r7, #1 + 8001bee: 1c0a adds r2, r1, #0 + 8001bf0: 701a strb r2, [r3, #0] + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + 8001bf2: 1c7b adds r3, r7, #1 + 8001bf4: 781b ldrb r3, [r3, #0] + 8001bf6: 2b00 cmp r3, #0 + 8001bf8: d004 beq.n 8001c04 + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + 8001bfa: 1cbb adds r3, r7, #2 + 8001bfc: 881a ldrh r2, [r3, #0] + 8001bfe: 687b ldr r3, [r7, #4] + 8001c00: 619a str r2, [r3, #24] + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + 8001c02: e003 b.n 8001c0c + GPIOx->BRR = (uint32_t)GPIO_Pin; + 8001c04: 1cbb adds r3, r7, #2 + 8001c06: 881a ldrh r2, [r3, #0] + 8001c08: 687b ldr r3, [r7, #4] + 8001c0a: 629a str r2, [r3, #40] ; 0x28 +} + 8001c0c: 46c0 nop ; (mov r8, r8) + 8001c0e: 46bd mov sp, r7 + 8001c10: b002 add sp, #8 + 8001c12: bd80 pop {r7, pc} + +08001c14 : + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the pin to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + 8001c14: b580 push {r7, lr} + 8001c16: b084 sub sp, #16 + 8001c18: af00 add r7, sp, #0 + 8001c1a: 6078 str r0, [r7, #4] + 8001c1c: 000a movs r2, r1 + 8001c1e: 1cbb adds r3, r7, #2 + 8001c20: 801a strh r2, [r3, #0] + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Ouput Data Register value */ + odr = GPIOx->ODR; + 8001c22: 687b ldr r3, [r7, #4] + 8001c24: 695b ldr r3, [r3, #20] + 8001c26: 60fb str r3, [r7, #12] + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); + 8001c28: 1cbb adds r3, r7, #2 + 8001c2a: 881b ldrh r3, [r3, #0] + 8001c2c: 68fa ldr r2, [r7, #12] + 8001c2e: 4013 ands r3, r2 + 8001c30: 041a lsls r2, r3, #16 + 8001c32: 68fb ldr r3, [r7, #12] + 8001c34: 43db mvns r3, r3 + 8001c36: 1cb9 adds r1, r7, #2 + 8001c38: 8809 ldrh r1, [r1, #0] + 8001c3a: 400b ands r3, r1 + 8001c3c: 431a orrs r2, r3 + 8001c3e: 687b ldr r3, [r7, #4] + 8001c40: 619a str r2, [r3, #24] +} + 8001c42: 46c0 nop ; (mov r8, r8) + 8001c44: 46bd mov sp, r7 + 8001c46: b004 add sp, #16 + 8001c48: bd80 pop {r7, pc} + ... + +08001c4c : + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + 8001c4c: b580 push {r7, lr} + 8001c4e: b088 sub sp, #32 + 8001c50: af00 add r7, sp, #0 + 8001c52: 6078 str r0, [r7, #4] + uint32_t tickstart; + uint32_t pll_config; + uint32_t pll_config2; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + 8001c54: 687b ldr r3, [r7, #4] + 8001c56: 2b00 cmp r3, #0 + 8001c58: d101 bne.n 8001c5e + { + return HAL_ERROR; + 8001c5a: 2301 movs r3, #1 + 8001c5c: e303 b.n 8002266 + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + 8001c5e: 687b ldr r3, [r7, #4] + 8001c60: 681b ldr r3, [r3, #0] + 8001c62: 2201 movs r2, #1 + 8001c64: 4013 ands r3, r2 + 8001c66: d100 bne.n 8001c6a + 8001c68: e08d b.n 8001d86 + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + 8001c6a: 4bc4 ldr r3, [pc, #784] ; (8001f7c ) + 8001c6c: 685b ldr r3, [r3, #4] + 8001c6e: 220c movs r2, #12 + 8001c70: 4013 ands r3, r2 + 8001c72: 2b04 cmp r3, #4 + 8001c74: d00e beq.n 8001c94 + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + 8001c76: 4bc1 ldr r3, [pc, #772] ; (8001f7c ) + 8001c78: 685b ldr r3, [r3, #4] + 8001c7a: 220c movs r2, #12 + 8001c7c: 4013 ands r3, r2 + 8001c7e: 2b08 cmp r3, #8 + 8001c80: d116 bne.n 8001cb0 + 8001c82: 4bbe ldr r3, [pc, #760] ; (8001f7c ) + 8001c84: 685a ldr r2, [r3, #4] + 8001c86: 2380 movs r3, #128 ; 0x80 + 8001c88: 025b lsls r3, r3, #9 + 8001c8a: 401a ands r2, r3 + 8001c8c: 2380 movs r3, #128 ; 0x80 + 8001c8e: 025b lsls r3, r3, #9 + 8001c90: 429a cmp r2, r3 + 8001c92: d10d bne.n 8001cb0 + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 8001c94: 4bb9 ldr r3, [pc, #740] ; (8001f7c ) + 8001c96: 681a ldr r2, [r3, #0] + 8001c98: 2380 movs r3, #128 ; 0x80 + 8001c9a: 029b lsls r3, r3, #10 + 8001c9c: 4013 ands r3, r2 + 8001c9e: d100 bne.n 8001ca2 + 8001ca0: e070 b.n 8001d84 + 8001ca2: 687b ldr r3, [r7, #4] + 8001ca4: 685b ldr r3, [r3, #4] + 8001ca6: 2b00 cmp r3, #0 + 8001ca8: d000 beq.n 8001cac + 8001caa: e06b b.n 8001d84 + { + return HAL_ERROR; + 8001cac: 2301 movs r3, #1 + 8001cae: e2da b.n 8002266 + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + 8001cb0: 687b ldr r3, [r7, #4] + 8001cb2: 685b ldr r3, [r3, #4] + 8001cb4: 2b01 cmp r3, #1 + 8001cb6: d107 bne.n 8001cc8 + 8001cb8: 4bb0 ldr r3, [pc, #704] ; (8001f7c ) + 8001cba: 681a ldr r2, [r3, #0] + 8001cbc: 4baf ldr r3, [pc, #700] ; (8001f7c ) + 8001cbe: 2180 movs r1, #128 ; 0x80 + 8001cc0: 0249 lsls r1, r1, #9 + 8001cc2: 430a orrs r2, r1 + 8001cc4: 601a str r2, [r3, #0] + 8001cc6: e02f b.n 8001d28 + 8001cc8: 687b ldr r3, [r7, #4] + 8001cca: 685b ldr r3, [r3, #4] + 8001ccc: 2b00 cmp r3, #0 + 8001cce: d10c bne.n 8001cea + 8001cd0: 4baa ldr r3, [pc, #680] ; (8001f7c ) + 8001cd2: 681a ldr r2, [r3, #0] + 8001cd4: 4ba9 ldr r3, [pc, #676] ; (8001f7c ) + 8001cd6: 49aa ldr r1, [pc, #680] ; (8001f80 ) + 8001cd8: 400a ands r2, r1 + 8001cda: 601a str r2, [r3, #0] + 8001cdc: 4ba7 ldr r3, [pc, #668] ; (8001f7c ) + 8001cde: 681a ldr r2, [r3, #0] + 8001ce0: 4ba6 ldr r3, [pc, #664] ; (8001f7c ) + 8001ce2: 49a8 ldr r1, [pc, #672] ; (8001f84 ) + 8001ce4: 400a ands r2, r1 + 8001ce6: 601a str r2, [r3, #0] + 8001ce8: e01e b.n 8001d28 + 8001cea: 687b ldr r3, [r7, #4] + 8001cec: 685b ldr r3, [r3, #4] + 8001cee: 2b05 cmp r3, #5 + 8001cf0: d10e bne.n 8001d10 + 8001cf2: 4ba2 ldr r3, [pc, #648] ; (8001f7c ) + 8001cf4: 681a ldr r2, [r3, #0] + 8001cf6: 4ba1 ldr r3, [pc, #644] ; (8001f7c ) + 8001cf8: 2180 movs r1, #128 ; 0x80 + 8001cfa: 02c9 lsls r1, r1, #11 + 8001cfc: 430a orrs r2, r1 + 8001cfe: 601a str r2, [r3, #0] + 8001d00: 4b9e ldr r3, [pc, #632] ; (8001f7c ) + 8001d02: 681a ldr r2, [r3, #0] + 8001d04: 4b9d ldr r3, [pc, #628] ; (8001f7c ) + 8001d06: 2180 movs r1, #128 ; 0x80 + 8001d08: 0249 lsls r1, r1, #9 + 8001d0a: 430a orrs r2, r1 + 8001d0c: 601a str r2, [r3, #0] + 8001d0e: e00b b.n 8001d28 + 8001d10: 4b9a ldr r3, [pc, #616] ; (8001f7c ) + 8001d12: 681a ldr r2, [r3, #0] + 8001d14: 4b99 ldr r3, [pc, #612] ; (8001f7c ) + 8001d16: 499a ldr r1, [pc, #616] ; (8001f80 ) + 8001d18: 400a ands r2, r1 + 8001d1a: 601a str r2, [r3, #0] + 8001d1c: 4b97 ldr r3, [pc, #604] ; (8001f7c ) + 8001d1e: 681a ldr r2, [r3, #0] + 8001d20: 4b96 ldr r3, [pc, #600] ; (8001f7c ) + 8001d22: 4998 ldr r1, [pc, #608] ; (8001f84 ) + 8001d24: 400a ands r2, r1 + 8001d26: 601a str r2, [r3, #0] + + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + 8001d28: 687b ldr r3, [r7, #4] + 8001d2a: 685b ldr r3, [r3, #4] + 8001d2c: 2b00 cmp r3, #0 + 8001d2e: d014 beq.n 8001d5a + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001d30: f7ff fcbc bl 80016ac + 8001d34: 0003 movs r3, r0 + 8001d36: 61bb str r3, [r7, #24] + + /* Wait till HSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 8001d38: e008 b.n 8001d4c + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + 8001d3a: f7ff fcb7 bl 80016ac + 8001d3e: 0002 movs r2, r0 + 8001d40: 69bb ldr r3, [r7, #24] + 8001d42: 1ad3 subs r3, r2, r3 + 8001d44: 2b64 cmp r3, #100 ; 0x64 + 8001d46: d901 bls.n 8001d4c + { + return HAL_TIMEOUT; + 8001d48: 2303 movs r3, #3 + 8001d4a: e28c b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 8001d4c: 4b8b ldr r3, [pc, #556] ; (8001f7c ) + 8001d4e: 681a ldr r2, [r3, #0] + 8001d50: 2380 movs r3, #128 ; 0x80 + 8001d52: 029b lsls r3, r3, #10 + 8001d54: 4013 ands r3, r2 + 8001d56: d0f0 beq.n 8001d3a + 8001d58: e015 b.n 8001d86 + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001d5a: f7ff fca7 bl 80016ac + 8001d5e: 0003 movs r3, r0 + 8001d60: 61bb str r3, [r7, #24] + + /* Wait till HSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + 8001d62: e008 b.n 8001d76 + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + 8001d64: f7ff fca2 bl 80016ac + 8001d68: 0002 movs r2, r0 + 8001d6a: 69bb ldr r3, [r7, #24] + 8001d6c: 1ad3 subs r3, r2, r3 + 8001d6e: 2b64 cmp r3, #100 ; 0x64 + 8001d70: d901 bls.n 8001d76 + { + return HAL_TIMEOUT; + 8001d72: 2303 movs r3, #3 + 8001d74: e277 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + 8001d76: 4b81 ldr r3, [pc, #516] ; (8001f7c ) + 8001d78: 681a ldr r2, [r3, #0] + 8001d7a: 2380 movs r3, #128 ; 0x80 + 8001d7c: 029b lsls r3, r3, #10 + 8001d7e: 4013 ands r3, r2 + 8001d80: d1f0 bne.n 8001d64 + 8001d82: e000 b.n 8001d86 + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 8001d84: 46c0 nop ; (mov r8, r8) + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + 8001d86: 687b ldr r3, [r7, #4] + 8001d88: 681b ldr r3, [r3, #0] + 8001d8a: 2202 movs r2, #2 + 8001d8c: 4013 ands r3, r2 + 8001d8e: d100 bne.n 8001d92 + 8001d90: e069 b.n 8001e66 + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + 8001d92: 4b7a ldr r3, [pc, #488] ; (8001f7c ) + 8001d94: 685b ldr r3, [r3, #4] + 8001d96: 220c movs r2, #12 + 8001d98: 4013 ands r3, r2 + 8001d9a: d00b beq.n 8001db4 + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI))) + 8001d9c: 4b77 ldr r3, [pc, #476] ; (8001f7c ) + 8001d9e: 685b ldr r3, [r3, #4] + 8001da0: 220c movs r2, #12 + 8001da2: 4013 ands r3, r2 + 8001da4: 2b08 cmp r3, #8 + 8001da6: d11c bne.n 8001de2 + 8001da8: 4b74 ldr r3, [pc, #464] ; (8001f7c ) + 8001daa: 685a ldr r2, [r3, #4] + 8001dac: 2380 movs r3, #128 ; 0x80 + 8001dae: 025b lsls r3, r3, #9 + 8001db0: 4013 ands r3, r2 + 8001db2: d116 bne.n 8001de2 + { + /* When HSI is used as system clock it will not disabled */ + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + 8001db4: 4b71 ldr r3, [pc, #452] ; (8001f7c ) + 8001db6: 681b ldr r3, [r3, #0] + 8001db8: 2202 movs r2, #2 + 8001dba: 4013 ands r3, r2 + 8001dbc: d005 beq.n 8001dca + 8001dbe: 687b ldr r3, [r7, #4] + 8001dc0: 68db ldr r3, [r3, #12] + 8001dc2: 2b01 cmp r3, #1 + 8001dc4: d001 beq.n 8001dca + { + return HAL_ERROR; + 8001dc6: 2301 movs r3, #1 + 8001dc8: e24d b.n 8002266 + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 8001dca: 4b6c ldr r3, [pc, #432] ; (8001f7c ) + 8001dcc: 681b ldr r3, [r3, #0] + 8001dce: 22f8 movs r2, #248 ; 0xf8 + 8001dd0: 4393 bics r3, r2 + 8001dd2: 0019 movs r1, r3 + 8001dd4: 687b ldr r3, [r7, #4] + 8001dd6: 691b ldr r3, [r3, #16] + 8001dd8: 00da lsls r2, r3, #3 + 8001dda: 4b68 ldr r3, [pc, #416] ; (8001f7c ) + 8001ddc: 430a orrs r2, r1 + 8001dde: 601a str r2, [r3, #0] + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + 8001de0: e041 b.n 8001e66 + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + 8001de2: 687b ldr r3, [r7, #4] + 8001de4: 68db ldr r3, [r3, #12] + 8001de6: 2b00 cmp r3, #0 + 8001de8: d024 beq.n 8001e34 + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + 8001dea: 4b64 ldr r3, [pc, #400] ; (8001f7c ) + 8001dec: 681a ldr r2, [r3, #0] + 8001dee: 4b63 ldr r3, [pc, #396] ; (8001f7c ) + 8001df0: 2101 movs r1, #1 + 8001df2: 430a orrs r2, r1 + 8001df4: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001df6: f7ff fc59 bl 80016ac + 8001dfa: 0003 movs r3, r0 + 8001dfc: 61bb str r3, [r7, #24] + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 8001dfe: e008 b.n 8001e12 + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + 8001e00: f7ff fc54 bl 80016ac + 8001e04: 0002 movs r2, r0 + 8001e06: 69bb ldr r3, [r7, #24] + 8001e08: 1ad3 subs r3, r2, r3 + 8001e0a: 2b02 cmp r3, #2 + 8001e0c: d901 bls.n 8001e12 + { + return HAL_TIMEOUT; + 8001e0e: 2303 movs r3, #3 + 8001e10: e229 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 8001e12: 4b5a ldr r3, [pc, #360] ; (8001f7c ) + 8001e14: 681b ldr r3, [r3, #0] + 8001e16: 2202 movs r2, #2 + 8001e18: 4013 ands r3, r2 + 8001e1a: d0f1 beq.n 8001e00 + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 8001e1c: 4b57 ldr r3, [pc, #348] ; (8001f7c ) + 8001e1e: 681b ldr r3, [r3, #0] + 8001e20: 22f8 movs r2, #248 ; 0xf8 + 8001e22: 4393 bics r3, r2 + 8001e24: 0019 movs r1, r3 + 8001e26: 687b ldr r3, [r7, #4] + 8001e28: 691b ldr r3, [r3, #16] + 8001e2a: 00da lsls r2, r3, #3 + 8001e2c: 4b53 ldr r3, [pc, #332] ; (8001f7c ) + 8001e2e: 430a orrs r2, r1 + 8001e30: 601a str r2, [r3, #0] + 8001e32: e018 b.n 8001e66 + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + 8001e34: 4b51 ldr r3, [pc, #324] ; (8001f7c ) + 8001e36: 681a ldr r2, [r3, #0] + 8001e38: 4b50 ldr r3, [pc, #320] ; (8001f7c ) + 8001e3a: 2101 movs r1, #1 + 8001e3c: 438a bics r2, r1 + 8001e3e: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001e40: f7ff fc34 bl 80016ac + 8001e44: 0003 movs r3, r0 + 8001e46: 61bb str r3, [r7, #24] + + /* Wait till HSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + 8001e48: e008 b.n 8001e5c + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + 8001e4a: f7ff fc2f bl 80016ac + 8001e4e: 0002 movs r2, r0 + 8001e50: 69bb ldr r3, [r7, #24] + 8001e52: 1ad3 subs r3, r2, r3 + 8001e54: 2b02 cmp r3, #2 + 8001e56: d901 bls.n 8001e5c + { + return HAL_TIMEOUT; + 8001e58: 2303 movs r3, #3 + 8001e5a: e204 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + 8001e5c: 4b47 ldr r3, [pc, #284] ; (8001f7c ) + 8001e5e: 681b ldr r3, [r3, #0] + 8001e60: 2202 movs r2, #2 + 8001e62: 4013 ands r3, r2 + 8001e64: d1f1 bne.n 8001e4a + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + 8001e66: 687b ldr r3, [r7, #4] + 8001e68: 681b ldr r3, [r3, #0] + 8001e6a: 2208 movs r2, #8 + 8001e6c: 4013 ands r3, r2 + 8001e6e: d036 beq.n 8001ede + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + 8001e70: 687b ldr r3, [r7, #4] + 8001e72: 69db ldr r3, [r3, #28] + 8001e74: 2b00 cmp r3, #0 + 8001e76: d019 beq.n 8001eac + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + 8001e78: 4b40 ldr r3, [pc, #256] ; (8001f7c ) + 8001e7a: 6a5a ldr r2, [r3, #36] ; 0x24 + 8001e7c: 4b3f ldr r3, [pc, #252] ; (8001f7c ) + 8001e7e: 2101 movs r1, #1 + 8001e80: 430a orrs r2, r1 + 8001e82: 625a str r2, [r3, #36] ; 0x24 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001e84: f7ff fc12 bl 80016ac + 8001e88: 0003 movs r3, r0 + 8001e8a: 61bb str r3, [r7, #24] + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + 8001e8c: e008 b.n 8001ea0 + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + 8001e8e: f7ff fc0d bl 80016ac + 8001e92: 0002 movs r2, r0 + 8001e94: 69bb ldr r3, [r7, #24] + 8001e96: 1ad3 subs r3, r2, r3 + 8001e98: 2b02 cmp r3, #2 + 8001e9a: d901 bls.n 8001ea0 + { + return HAL_TIMEOUT; + 8001e9c: 2303 movs r3, #3 + 8001e9e: e1e2 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + 8001ea0: 4b36 ldr r3, [pc, #216] ; (8001f7c ) + 8001ea2: 6a5b ldr r3, [r3, #36] ; 0x24 + 8001ea4: 2202 movs r2, #2 + 8001ea6: 4013 ands r3, r2 + 8001ea8: d0f1 beq.n 8001e8e + 8001eaa: e018 b.n 8001ede + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + 8001eac: 4b33 ldr r3, [pc, #204] ; (8001f7c ) + 8001eae: 6a5a ldr r2, [r3, #36] ; 0x24 + 8001eb0: 4b32 ldr r3, [pc, #200] ; (8001f7c ) + 8001eb2: 2101 movs r1, #1 + 8001eb4: 438a bics r2, r1 + 8001eb6: 625a str r2, [r3, #36] ; 0x24 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001eb8: f7ff fbf8 bl 80016ac + 8001ebc: 0003 movs r3, r0 + 8001ebe: 61bb str r3, [r7, #24] + + /* Wait till LSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + 8001ec0: e008 b.n 8001ed4 + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + 8001ec2: f7ff fbf3 bl 80016ac + 8001ec6: 0002 movs r2, r0 + 8001ec8: 69bb ldr r3, [r7, #24] + 8001eca: 1ad3 subs r3, r2, r3 + 8001ecc: 2b02 cmp r3, #2 + 8001ece: d901 bls.n 8001ed4 + { + return HAL_TIMEOUT; + 8001ed0: 2303 movs r3, #3 + 8001ed2: e1c8 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + 8001ed4: 4b29 ldr r3, [pc, #164] ; (8001f7c ) + 8001ed6: 6a5b ldr r3, [r3, #36] ; 0x24 + 8001ed8: 2202 movs r2, #2 + 8001eda: 4013 ands r3, r2 + 8001edc: d1f1 bne.n 8001ec2 + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + 8001ede: 687b ldr r3, [r7, #4] + 8001ee0: 681b ldr r3, [r3, #0] + 8001ee2: 2204 movs r2, #4 + 8001ee4: 4013 ands r3, r2 + 8001ee6: d100 bne.n 8001eea + 8001ee8: e0b6 b.n 8002058 + { + FlagStatus pwrclkchanged = RESET; + 8001eea: 231f movs r3, #31 + 8001eec: 18fb adds r3, r7, r3 + 8001eee: 2200 movs r2, #0 + 8001ef0: 701a strb r2, [r3, #0] + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + 8001ef2: 4b22 ldr r3, [pc, #136] ; (8001f7c ) + 8001ef4: 69da ldr r2, [r3, #28] + 8001ef6: 2380 movs r3, #128 ; 0x80 + 8001ef8: 055b lsls r3, r3, #21 + 8001efa: 4013 ands r3, r2 + 8001efc: d111 bne.n 8001f22 + { + __HAL_RCC_PWR_CLK_ENABLE(); + 8001efe: 4b1f ldr r3, [pc, #124] ; (8001f7c ) + 8001f00: 69da ldr r2, [r3, #28] + 8001f02: 4b1e ldr r3, [pc, #120] ; (8001f7c ) + 8001f04: 2180 movs r1, #128 ; 0x80 + 8001f06: 0549 lsls r1, r1, #21 + 8001f08: 430a orrs r2, r1 + 8001f0a: 61da str r2, [r3, #28] + 8001f0c: 4b1b ldr r3, [pc, #108] ; (8001f7c ) + 8001f0e: 69da ldr r2, [r3, #28] + 8001f10: 2380 movs r3, #128 ; 0x80 + 8001f12: 055b lsls r3, r3, #21 + 8001f14: 4013 ands r3, r2 + 8001f16: 60fb str r3, [r7, #12] + 8001f18: 68fb ldr r3, [r7, #12] + pwrclkchanged = SET; + 8001f1a: 231f movs r3, #31 + 8001f1c: 18fb adds r3, r7, r3 + 8001f1e: 2201 movs r2, #1 + 8001f20: 701a strb r2, [r3, #0] + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8001f22: 4b19 ldr r3, [pc, #100] ; (8001f88 ) + 8001f24: 681a ldr r2, [r3, #0] + 8001f26: 2380 movs r3, #128 ; 0x80 + 8001f28: 005b lsls r3, r3, #1 + 8001f2a: 4013 ands r3, r2 + 8001f2c: d11a bne.n 8001f64 + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + 8001f2e: 4b16 ldr r3, [pc, #88] ; (8001f88 ) + 8001f30: 681a ldr r2, [r3, #0] + 8001f32: 4b15 ldr r3, [pc, #84] ; (8001f88 ) + 8001f34: 2180 movs r1, #128 ; 0x80 + 8001f36: 0049 lsls r1, r1, #1 + 8001f38: 430a orrs r2, r1 + 8001f3a: 601a str r2, [r3, #0] + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + 8001f3c: f7ff fbb6 bl 80016ac + 8001f40: 0003 movs r3, r0 + 8001f42: 61bb str r3, [r7, #24] + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8001f44: e008 b.n 8001f58 + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + 8001f46: f7ff fbb1 bl 80016ac + 8001f4a: 0002 movs r2, r0 + 8001f4c: 69bb ldr r3, [r7, #24] + 8001f4e: 1ad3 subs r3, r2, r3 + 8001f50: 2b64 cmp r3, #100 ; 0x64 + 8001f52: d901 bls.n 8001f58 + { + return HAL_TIMEOUT; + 8001f54: 2303 movs r3, #3 + 8001f56: e186 b.n 8002266 + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 8001f58: 4b0b ldr r3, [pc, #44] ; (8001f88 ) + 8001f5a: 681a ldr r2, [r3, #0] + 8001f5c: 2380 movs r3, #128 ; 0x80 + 8001f5e: 005b lsls r3, r3, #1 + 8001f60: 4013 ands r3, r2 + 8001f62: d0f0 beq.n 8001f46 + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + 8001f64: 687b ldr r3, [r7, #4] + 8001f66: 689b ldr r3, [r3, #8] + 8001f68: 2b01 cmp r3, #1 + 8001f6a: d10f bne.n 8001f8c + 8001f6c: 4b03 ldr r3, [pc, #12] ; (8001f7c ) + 8001f6e: 6a1a ldr r2, [r3, #32] + 8001f70: 4b02 ldr r3, [pc, #8] ; (8001f7c ) + 8001f72: 2101 movs r1, #1 + 8001f74: 430a orrs r2, r1 + 8001f76: 621a str r2, [r3, #32] + 8001f78: e036 b.n 8001fe8 + 8001f7a: 46c0 nop ; (mov r8, r8) + 8001f7c: 40021000 .word 0x40021000 + 8001f80: fffeffff .word 0xfffeffff + 8001f84: fffbffff .word 0xfffbffff + 8001f88: 40007000 .word 0x40007000 + 8001f8c: 687b ldr r3, [r7, #4] + 8001f8e: 689b ldr r3, [r3, #8] + 8001f90: 2b00 cmp r3, #0 + 8001f92: d10c bne.n 8001fae + 8001f94: 4bb6 ldr r3, [pc, #728] ; (8002270 ) + 8001f96: 6a1a ldr r2, [r3, #32] + 8001f98: 4bb5 ldr r3, [pc, #724] ; (8002270 ) + 8001f9a: 2101 movs r1, #1 + 8001f9c: 438a bics r2, r1 + 8001f9e: 621a str r2, [r3, #32] + 8001fa0: 4bb3 ldr r3, [pc, #716] ; (8002270 ) + 8001fa2: 6a1a ldr r2, [r3, #32] + 8001fa4: 4bb2 ldr r3, [pc, #712] ; (8002270 ) + 8001fa6: 2104 movs r1, #4 + 8001fa8: 438a bics r2, r1 + 8001faa: 621a str r2, [r3, #32] + 8001fac: e01c b.n 8001fe8 + 8001fae: 687b ldr r3, [r7, #4] + 8001fb0: 689b ldr r3, [r3, #8] + 8001fb2: 2b05 cmp r3, #5 + 8001fb4: d10c bne.n 8001fd0 + 8001fb6: 4bae ldr r3, [pc, #696] ; (8002270 ) + 8001fb8: 6a1a ldr r2, [r3, #32] + 8001fba: 4bad ldr r3, [pc, #692] ; (8002270 ) + 8001fbc: 2104 movs r1, #4 + 8001fbe: 430a orrs r2, r1 + 8001fc0: 621a str r2, [r3, #32] + 8001fc2: 4bab ldr r3, [pc, #684] ; (8002270 ) + 8001fc4: 6a1a ldr r2, [r3, #32] + 8001fc6: 4baa ldr r3, [pc, #680] ; (8002270 ) + 8001fc8: 2101 movs r1, #1 + 8001fca: 430a orrs r2, r1 + 8001fcc: 621a str r2, [r3, #32] + 8001fce: e00b b.n 8001fe8 + 8001fd0: 4ba7 ldr r3, [pc, #668] ; (8002270 ) + 8001fd2: 6a1a ldr r2, [r3, #32] + 8001fd4: 4ba6 ldr r3, [pc, #664] ; (8002270 ) + 8001fd6: 2101 movs r1, #1 + 8001fd8: 438a bics r2, r1 + 8001fda: 621a str r2, [r3, #32] + 8001fdc: 4ba4 ldr r3, [pc, #656] ; (8002270 ) + 8001fde: 6a1a ldr r2, [r3, #32] + 8001fe0: 4ba3 ldr r3, [pc, #652] ; (8002270 ) + 8001fe2: 2104 movs r1, #4 + 8001fe4: 438a bics r2, r1 + 8001fe6: 621a str r2, [r3, #32] + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + 8001fe8: 687b ldr r3, [r7, #4] + 8001fea: 689b ldr r3, [r3, #8] + 8001fec: 2b00 cmp r3, #0 + 8001fee: d014 beq.n 800201a + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8001ff0: f7ff fb5c bl 80016ac + 8001ff4: 0003 movs r3, r0 + 8001ff6: 61bb str r3, [r7, #24] + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 8001ff8: e009 b.n 800200e + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + 8001ffa: f7ff fb57 bl 80016ac + 8001ffe: 0002 movs r2, r0 + 8002000: 69bb ldr r3, [r7, #24] + 8002002: 1ad3 subs r3, r2, r3 + 8002004: 4a9b ldr r2, [pc, #620] ; (8002274 ) + 8002006: 4293 cmp r3, r2 + 8002008: d901 bls.n 800200e + { + return HAL_TIMEOUT; + 800200a: 2303 movs r3, #3 + 800200c: e12b b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 800200e: 4b98 ldr r3, [pc, #608] ; (8002270 ) + 8002010: 6a1b ldr r3, [r3, #32] + 8002012: 2202 movs r2, #2 + 8002014: 4013 ands r3, r2 + 8002016: d0f0 beq.n 8001ffa + 8002018: e013 b.n 8002042 + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 800201a: f7ff fb47 bl 80016ac + 800201e: 0003 movs r3, r0 + 8002020: 61bb str r3, [r7, #24] + + /* Wait till LSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + 8002022: e009 b.n 8002038 + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + 8002024: f7ff fb42 bl 80016ac + 8002028: 0002 movs r2, r0 + 800202a: 69bb ldr r3, [r7, #24] + 800202c: 1ad3 subs r3, r2, r3 + 800202e: 4a91 ldr r2, [pc, #580] ; (8002274 ) + 8002030: 4293 cmp r3, r2 + 8002032: d901 bls.n 8002038 + { + return HAL_TIMEOUT; + 8002034: 2303 movs r3, #3 + 8002036: e116 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + 8002038: 4b8d ldr r3, [pc, #564] ; (8002270 ) + 800203a: 6a1b ldr r3, [r3, #32] + 800203c: 2202 movs r2, #2 + 800203e: 4013 ands r3, r2 + 8002040: d1f0 bne.n 8002024 + } + } + } + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + 8002042: 231f movs r3, #31 + 8002044: 18fb adds r3, r7, r3 + 8002046: 781b ldrb r3, [r3, #0] + 8002048: 2b01 cmp r3, #1 + 800204a: d105 bne.n 8002058 + { + __HAL_RCC_PWR_CLK_DISABLE(); + 800204c: 4b88 ldr r3, [pc, #544] ; (8002270 ) + 800204e: 69da ldr r2, [r3, #28] + 8002050: 4b87 ldr r3, [pc, #540] ; (8002270 ) + 8002052: 4989 ldr r1, [pc, #548] ; (8002278 ) + 8002054: 400a ands r2, r1 + 8002056: 61da str r2, [r3, #28] + } + } + + /*----------------------------- HSI14 Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) + 8002058: 687b ldr r3, [r7, #4] + 800205a: 681b ldr r3, [r3, #0] + 800205c: 2210 movs r2, #16 + 800205e: 4013 ands r3, r2 + 8002060: d063 beq.n 800212a + /* Check the parameters */ + assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue)); + + /* Check the HSI14 State */ + if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON) + 8002062: 687b ldr r3, [r7, #4] + 8002064: 695b ldr r3, [r3, #20] + 8002066: 2b01 cmp r3, #1 + 8002068: d12a bne.n 80020c0 + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + 800206a: 4b81 ldr r3, [pc, #516] ; (8002270 ) + 800206c: 6b5a ldr r2, [r3, #52] ; 0x34 + 800206e: 4b80 ldr r3, [pc, #512] ; (8002270 ) + 8002070: 2104 movs r1, #4 + 8002072: 430a orrs r2, r1 + 8002074: 635a str r2, [r3, #52] ; 0x34 + + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_ENABLE(); + 8002076: 4b7e ldr r3, [pc, #504] ; (8002270 ) + 8002078: 6b5a ldr r2, [r3, #52] ; 0x34 + 800207a: 4b7d ldr r3, [pc, #500] ; (8002270 ) + 800207c: 2101 movs r1, #1 + 800207e: 430a orrs r2, r1 + 8002080: 635a str r2, [r3, #52] ; 0x34 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002082: f7ff fb13 bl 80016ac + 8002086: 0003 movs r3, r0 + 8002088: 61bb str r3, [r7, #24] + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET) + 800208a: e008 b.n 800209e + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + 800208c: f7ff fb0e bl 80016ac + 8002090: 0002 movs r2, r0 + 8002092: 69bb ldr r3, [r7, #24] + 8002094: 1ad3 subs r3, r2, r3 + 8002096: 2b02 cmp r3, #2 + 8002098: d901 bls.n 800209e + { + return HAL_TIMEOUT; + 800209a: 2303 movs r3, #3 + 800209c: e0e3 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET) + 800209e: 4b74 ldr r3, [pc, #464] ; (8002270 ) + 80020a0: 6b5b ldr r3, [r3, #52] ; 0x34 + 80020a2: 2202 movs r2, #2 + 80020a4: 4013 ands r3, r2 + 80020a6: d0f1 beq.n 800208c + } + } + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + 80020a8: 4b71 ldr r3, [pc, #452] ; (8002270 ) + 80020aa: 6b5b ldr r3, [r3, #52] ; 0x34 + 80020ac: 22f8 movs r2, #248 ; 0xf8 + 80020ae: 4393 bics r3, r2 + 80020b0: 0019 movs r1, r3 + 80020b2: 687b ldr r3, [r7, #4] + 80020b4: 699b ldr r3, [r3, #24] + 80020b6: 00da lsls r2, r3, #3 + 80020b8: 4b6d ldr r3, [pc, #436] ; (8002270 ) + 80020ba: 430a orrs r2, r1 + 80020bc: 635a str r2, [r3, #52] ; 0x34 + 80020be: e034 b.n 800212a + } + else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL) + 80020c0: 687b ldr r3, [r7, #4] + 80020c2: 695b ldr r3, [r3, #20] + 80020c4: 3305 adds r3, #5 + 80020c6: d111 bne.n 80020ec + { + /* Enable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_ENABLE(); + 80020c8: 4b69 ldr r3, [pc, #420] ; (8002270 ) + 80020ca: 6b5a ldr r2, [r3, #52] ; 0x34 + 80020cc: 4b68 ldr r3, [pc, #416] ; (8002270 ) + 80020ce: 2104 movs r1, #4 + 80020d0: 438a bics r2, r1 + 80020d2: 635a str r2, [r3, #52] ; 0x34 + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + 80020d4: 4b66 ldr r3, [pc, #408] ; (8002270 ) + 80020d6: 6b5b ldr r3, [r3, #52] ; 0x34 + 80020d8: 22f8 movs r2, #248 ; 0xf8 + 80020da: 4393 bics r3, r2 + 80020dc: 0019 movs r1, r3 + 80020de: 687b ldr r3, [r7, #4] + 80020e0: 699b ldr r3, [r3, #24] + 80020e2: 00da lsls r2, r3, #3 + 80020e4: 4b62 ldr r3, [pc, #392] ; (8002270 ) + 80020e6: 430a orrs r2, r1 + 80020e8: 635a str r2, [r3, #52] ; 0x34 + 80020ea: e01e b.n 800212a + } + else + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + 80020ec: 4b60 ldr r3, [pc, #384] ; (8002270 ) + 80020ee: 6b5a ldr r2, [r3, #52] ; 0x34 + 80020f0: 4b5f ldr r3, [pc, #380] ; (8002270 ) + 80020f2: 2104 movs r1, #4 + 80020f4: 430a orrs r2, r1 + 80020f6: 635a str r2, [r3, #52] ; 0x34 + + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_DISABLE(); + 80020f8: 4b5d ldr r3, [pc, #372] ; (8002270 ) + 80020fa: 6b5a ldr r2, [r3, #52] ; 0x34 + 80020fc: 4b5c ldr r3, [pc, #368] ; (8002270 ) + 80020fe: 2101 movs r1, #1 + 8002100: 438a bics r2, r1 + 8002102: 635a str r2, [r3, #52] ; 0x34 + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002104: f7ff fad2 bl 80016ac + 8002108: 0003 movs r3, r0 + 800210a: 61bb str r3, [r7, #24] + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET) + 800210c: e008 b.n 8002120 + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + 800210e: f7ff facd bl 80016ac + 8002112: 0002 movs r2, r0 + 8002114: 69bb ldr r3, [r7, #24] + 8002116: 1ad3 subs r3, r2, r3 + 8002118: 2b02 cmp r3, #2 + 800211a: d901 bls.n 8002120 + { + return HAL_TIMEOUT; + 800211c: 2303 movs r3, #3 + 800211e: e0a2 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET) + 8002120: 4b53 ldr r3, [pc, #332] ; (8002270 ) + 8002122: 6b5b ldr r3, [r3, #52] ; 0x34 + 8002124: 2202 movs r2, #2 + 8002126: 4013 ands r3, r2 + 8002128: d1f1 bne.n 800210e +#endif /* RCC_HSI48_SUPPORT */ + + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + 800212a: 687b ldr r3, [r7, #4] + 800212c: 6a1b ldr r3, [r3, #32] + 800212e: 2b00 cmp r3, #0 + 8002130: d100 bne.n 8002134 + 8002132: e097 b.n 8002264 + { + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + 8002134: 4b4e ldr r3, [pc, #312] ; (8002270 ) + 8002136: 685b ldr r3, [r3, #4] + 8002138: 220c movs r2, #12 + 800213a: 4013 ands r3, r2 + 800213c: 2b08 cmp r3, #8 + 800213e: d100 bne.n 8002142 + 8002140: e06b b.n 800221a + { + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + 8002142: 687b ldr r3, [r7, #4] + 8002144: 6a1b ldr r3, [r3, #32] + 8002146: 2b02 cmp r3, #2 + 8002148: d14c bne.n 80021e4 + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 800214a: 4b49 ldr r3, [pc, #292] ; (8002270 ) + 800214c: 681a ldr r2, [r3, #0] + 800214e: 4b48 ldr r3, [pc, #288] ; (8002270 ) + 8002150: 494a ldr r1, [pc, #296] ; (800227c ) + 8002152: 400a ands r2, r1 + 8002154: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002156: f7ff faa9 bl 80016ac + 800215a: 0003 movs r3, r0 + 800215c: 61bb str r3, [r7, #24] + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 800215e: e008 b.n 8002172 + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + 8002160: f7ff faa4 bl 80016ac + 8002164: 0002 movs r2, r0 + 8002166: 69bb ldr r3, [r7, #24] + 8002168: 1ad3 subs r3, r2, r3 + 800216a: 2b02 cmp r3, #2 + 800216c: d901 bls.n 8002172 + { + return HAL_TIMEOUT; + 800216e: 2303 movs r3, #3 + 8002170: e079 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 8002172: 4b3f ldr r3, [pc, #252] ; (8002270 ) + 8002174: 681a ldr r2, [r3, #0] + 8002176: 2380 movs r3, #128 ; 0x80 + 8002178: 049b lsls r3, r3, #18 + 800217a: 4013 ands r3, r2 + 800217c: d1f0 bne.n 8002160 + } + } + + /* Configure the main PLL clock source, predivider and multiplication factor. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + 800217e: 4b3c ldr r3, [pc, #240] ; (8002270 ) + 8002180: 6adb ldr r3, [r3, #44] ; 0x2c + 8002182: 220f movs r2, #15 + 8002184: 4393 bics r3, r2 + 8002186: 0019 movs r1, r3 + 8002188: 687b ldr r3, [r7, #4] + 800218a: 6ada ldr r2, [r3, #44] ; 0x2c + 800218c: 4b38 ldr r3, [pc, #224] ; (8002270 ) + 800218e: 430a orrs r2, r1 + 8002190: 62da str r2, [r3, #44] ; 0x2c + 8002192: 4b37 ldr r3, [pc, #220] ; (8002270 ) + 8002194: 685b ldr r3, [r3, #4] + 8002196: 4a3a ldr r2, [pc, #232] ; (8002280 ) + 8002198: 4013 ands r3, r2 + 800219a: 0019 movs r1, r3 + 800219c: 687b ldr r3, [r7, #4] + 800219e: 6a9a ldr r2, [r3, #40] ; 0x28 + 80021a0: 687b ldr r3, [r7, #4] + 80021a2: 6a5b ldr r3, [r3, #36] ; 0x24 + 80021a4: 431a orrs r2, r3 + 80021a6: 4b32 ldr r3, [pc, #200] ; (8002270 ) + 80021a8: 430a orrs r2, r1 + 80021aa: 605a str r2, [r3, #4] + RCC_OscInitStruct->PLL.PREDIV, + RCC_OscInitStruct->PLL.PLLMUL); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + 80021ac: 4b30 ldr r3, [pc, #192] ; (8002270 ) + 80021ae: 681a ldr r2, [r3, #0] + 80021b0: 4b2f ldr r3, [pc, #188] ; (8002270 ) + 80021b2: 2180 movs r1, #128 ; 0x80 + 80021b4: 0449 lsls r1, r1, #17 + 80021b6: 430a orrs r2, r1 + 80021b8: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 80021ba: f7ff fa77 bl 80016ac + 80021be: 0003 movs r3, r0 + 80021c0: 61bb str r3, [r7, #24] + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 80021c2: e008 b.n 80021d6 + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + 80021c4: f7ff fa72 bl 80016ac + 80021c8: 0002 movs r2, r0 + 80021ca: 69bb ldr r3, [r7, #24] + 80021cc: 1ad3 subs r3, r2, r3 + 80021ce: 2b02 cmp r3, #2 + 80021d0: d901 bls.n 80021d6 + { + return HAL_TIMEOUT; + 80021d2: 2303 movs r3, #3 + 80021d4: e047 b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 80021d6: 4b26 ldr r3, [pc, #152] ; (8002270 ) + 80021d8: 681a ldr r2, [r3, #0] + 80021da: 2380 movs r3, #128 ; 0x80 + 80021dc: 049b lsls r3, r3, #18 + 80021de: 4013 ands r3, r2 + 80021e0: d0f0 beq.n 80021c4 + 80021e2: e03f b.n 8002264 + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 80021e4: 4b22 ldr r3, [pc, #136] ; (8002270 ) + 80021e6: 681a ldr r2, [r3, #0] + 80021e8: 4b21 ldr r3, [pc, #132] ; (8002270 ) + 80021ea: 4924 ldr r1, [pc, #144] ; (800227c ) + 80021ec: 400a ands r2, r1 + 80021ee: 601a str r2, [r3, #0] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 80021f0: f7ff fa5c bl 80016ac + 80021f4: 0003 movs r3, r0 + 80021f6: 61bb str r3, [r7, #24] + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 80021f8: e008 b.n 800220c + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + 80021fa: f7ff fa57 bl 80016ac + 80021fe: 0002 movs r2, r0 + 8002200: 69bb ldr r3, [r7, #24] + 8002202: 1ad3 subs r3, r2, r3 + 8002204: 2b02 cmp r3, #2 + 8002206: d901 bls.n 800220c + { + return HAL_TIMEOUT; + 8002208: 2303 movs r3, #3 + 800220a: e02c b.n 8002266 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + 800220c: 4b18 ldr r3, [pc, #96] ; (8002270 ) + 800220e: 681a ldr r2, [r3, #0] + 8002210: 2380 movs r3, #128 ; 0x80 + 8002212: 049b lsls r3, r3, #18 + 8002214: 4013 ands r3, r2 + 8002216: d1f0 bne.n 80021fa + 8002218: e024 b.n 8002264 + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + 800221a: 687b ldr r3, [r7, #4] + 800221c: 6a1b ldr r3, [r3, #32] + 800221e: 2b01 cmp r3, #1 + 8002220: d101 bne.n 8002226 + { + return HAL_ERROR; + 8002222: 2301 movs r3, #1 + 8002224: e01f b.n 8002266 + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->CFGR; + 8002226: 4b12 ldr r3, [pc, #72] ; (8002270 ) + 8002228: 685b ldr r3, [r3, #4] + 800222a: 617b str r3, [r7, #20] + pll_config2 = RCC->CFGR2; + 800222c: 4b10 ldr r3, [pc, #64] ; (8002270 ) + 800222e: 6adb ldr r3, [r3, #44] ; 0x2c + 8002230: 613b str r3, [r7, #16] + if((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 8002232: 697a ldr r2, [r7, #20] + 8002234: 2380 movs r3, #128 ; 0x80 + 8002236: 025b lsls r3, r3, #9 + 8002238: 401a ands r2, r3 + 800223a: 687b ldr r3, [r7, #4] + 800223c: 6a5b ldr r3, [r3, #36] ; 0x24 + 800223e: 429a cmp r2, r3 + 8002240: d10e bne.n 8002260 + (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV) || + 8002242: 693b ldr r3, [r7, #16] + 8002244: 220f movs r2, #15 + 8002246: 401a ands r2, r3 + 8002248: 687b ldr r3, [r7, #4] + 800224a: 6adb ldr r3, [r3, #44] ; 0x2c + if((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 800224c: 429a cmp r2, r3 + 800224e: d107 bne.n 8002260 + (READ_BIT(pll_config, RCC_CFGR_PLLMUL) != RCC_OscInitStruct->PLL.PLLMUL)) + 8002250: 697a ldr r2, [r7, #20] + 8002252: 23f0 movs r3, #240 ; 0xf0 + 8002254: 039b lsls r3, r3, #14 + 8002256: 401a ands r2, r3 + 8002258: 687b ldr r3, [r7, #4] + 800225a: 6a9b ldr r3, [r3, #40] ; 0x28 + (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV) || + 800225c: 429a cmp r2, r3 + 800225e: d001 beq.n 8002264 + { + return HAL_ERROR; + 8002260: 2301 movs r3, #1 + 8002262: e000 b.n 8002266 + } + } + } + } + + return HAL_OK; + 8002264: 2300 movs r3, #0 +} + 8002266: 0018 movs r0, r3 + 8002268: 46bd mov sp, r7 + 800226a: b008 add sp, #32 + 800226c: bd80 pop {r7, pc} + 800226e: 46c0 nop ; (mov r8, r8) + 8002270: 40021000 .word 0x40021000 + 8002274: 00001388 .word 0x00001388 + 8002278: efffffff .word 0xefffffff + 800227c: feffffff .word 0xfeffffff + 8002280: ffc2ffff .word 0xffc2ffff + +08002284 : + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + 8002284: b580 push {r7, lr} + 8002286: b084 sub sp, #16 + 8002288: af00 add r7, sp, #0 + 800228a: 6078 str r0, [r7, #4] + 800228c: 6039 str r1, [r7, #0] + uint32_t tickstart; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + 800228e: 687b ldr r3, [r7, #4] + 8002290: 2b00 cmp r3, #0 + 8002292: d101 bne.n 8002298 + { + return HAL_ERROR; + 8002294: 2301 movs r3, #1 + 8002296: e0b3 b.n 8002400 + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + 8002298: 4b5b ldr r3, [pc, #364] ; (8002408 ) + 800229a: 681b ldr r3, [r3, #0] + 800229c: 2201 movs r2, #1 + 800229e: 4013 ands r3, r2 + 80022a0: 683a ldr r2, [r7, #0] + 80022a2: 429a cmp r2, r3 + 80022a4: d911 bls.n 80022ca + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 80022a6: 4b58 ldr r3, [pc, #352] ; (8002408 ) + 80022a8: 681b ldr r3, [r3, #0] + 80022aa: 2201 movs r2, #1 + 80022ac: 4393 bics r3, r2 + 80022ae: 0019 movs r1, r3 + 80022b0: 4b55 ldr r3, [pc, #340] ; (8002408 ) + 80022b2: 683a ldr r2, [r7, #0] + 80022b4: 430a orrs r2, r1 + 80022b6: 601a str r2, [r3, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + 80022b8: 4b53 ldr r3, [pc, #332] ; (8002408 ) + 80022ba: 681b ldr r3, [r3, #0] + 80022bc: 2201 movs r2, #1 + 80022be: 4013 ands r3, r2 + 80022c0: 683a ldr r2, [r7, #0] + 80022c2: 429a cmp r2, r3 + 80022c4: d001 beq.n 80022ca + { + return HAL_ERROR; + 80022c6: 2301 movs r3, #1 + 80022c8: e09a b.n 8002400 + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + 80022ca: 687b ldr r3, [r7, #4] + 80022cc: 681b ldr r3, [r3, #0] + 80022ce: 2202 movs r2, #2 + 80022d0: 4013 ands r3, r2 + 80022d2: d015 beq.n 8002300 + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + 80022d4: 687b ldr r3, [r7, #4] + 80022d6: 681b ldr r3, [r3, #0] + 80022d8: 2204 movs r2, #4 + 80022da: 4013 ands r3, r2 + 80022dc: d006 beq.n 80022ec + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + 80022de: 4b4b ldr r3, [pc, #300] ; (800240c ) + 80022e0: 685a ldr r2, [r3, #4] + 80022e2: 4b4a ldr r3, [pc, #296] ; (800240c ) + 80022e4: 21e0 movs r1, #224 ; 0xe0 + 80022e6: 00c9 lsls r1, r1, #3 + 80022e8: 430a orrs r2, r1 + 80022ea: 605a str r2, [r3, #4] + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + 80022ec: 4b47 ldr r3, [pc, #284] ; (800240c ) + 80022ee: 685b ldr r3, [r3, #4] + 80022f0: 22f0 movs r2, #240 ; 0xf0 + 80022f2: 4393 bics r3, r2 + 80022f4: 0019 movs r1, r3 + 80022f6: 687b ldr r3, [r7, #4] + 80022f8: 689a ldr r2, [r3, #8] + 80022fa: 4b44 ldr r3, [pc, #272] ; (800240c ) + 80022fc: 430a orrs r2, r1 + 80022fe: 605a str r2, [r3, #4] + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + 8002300: 687b ldr r3, [r7, #4] + 8002302: 681b ldr r3, [r3, #0] + 8002304: 2201 movs r2, #1 + 8002306: 4013 ands r3, r2 + 8002308: d040 beq.n 800238c + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + 800230a: 687b ldr r3, [r7, #4] + 800230c: 685b ldr r3, [r3, #4] + 800230e: 2b01 cmp r3, #1 + 8002310: d107 bne.n 8002322 + { + /* Check the HSE ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + 8002312: 4b3e ldr r3, [pc, #248] ; (800240c ) + 8002314: 681a ldr r2, [r3, #0] + 8002316: 2380 movs r3, #128 ; 0x80 + 8002318: 029b lsls r3, r3, #10 + 800231a: 4013 ands r3, r2 + 800231c: d114 bne.n 8002348 + { + return HAL_ERROR; + 800231e: 2301 movs r3, #1 + 8002320: e06e b.n 8002400 + } + } + /* PLL is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + 8002322: 687b ldr r3, [r7, #4] + 8002324: 685b ldr r3, [r3, #4] + 8002326: 2b02 cmp r3, #2 + 8002328: d107 bne.n 800233a + { + /* Check the PLL ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + 800232a: 4b38 ldr r3, [pc, #224] ; (800240c ) + 800232c: 681a ldr r2, [r3, #0] + 800232e: 2380 movs r3, #128 ; 0x80 + 8002330: 049b lsls r3, r3, #18 + 8002332: 4013 ands r3, r2 + 8002334: d108 bne.n 8002348 + { + return HAL_ERROR; + 8002336: 2301 movs r3, #1 + 8002338: e062 b.n 8002400 +#endif /* RCC_CFGR_SWS_HSI48 */ + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + 800233a: 4b34 ldr r3, [pc, #208] ; (800240c ) + 800233c: 681b ldr r3, [r3, #0] + 800233e: 2202 movs r2, #2 + 8002340: 4013 ands r3, r2 + 8002342: d101 bne.n 8002348 + { + return HAL_ERROR; + 8002344: 2301 movs r3, #1 + 8002346: e05b b.n 8002400 + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + 8002348: 4b30 ldr r3, [pc, #192] ; (800240c ) + 800234a: 685b ldr r3, [r3, #4] + 800234c: 2203 movs r2, #3 + 800234e: 4393 bics r3, r2 + 8002350: 0019 movs r1, r3 + 8002352: 687b ldr r3, [r7, #4] + 8002354: 685a ldr r2, [r3, #4] + 8002356: 4b2d ldr r3, [pc, #180] ; (800240c ) + 8002358: 430a orrs r2, r1 + 800235a: 605a str r2, [r3, #4] + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 800235c: f7ff f9a6 bl 80016ac + 8002360: 0003 movs r3, r0 + 8002362: 60fb str r3, [r7, #12] + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 8002364: e009 b.n 800237a + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + 8002366: f7ff f9a1 bl 80016ac + 800236a: 0002 movs r2, r0 + 800236c: 68fb ldr r3, [r7, #12] + 800236e: 1ad3 subs r3, r2, r3 + 8002370: 4a27 ldr r2, [pc, #156] ; (8002410 ) + 8002372: 4293 cmp r3, r2 + 8002374: d901 bls.n 800237a + { + return HAL_TIMEOUT; + 8002376: 2303 movs r3, #3 + 8002378: e042 b.n 8002400 + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 800237a: 4b24 ldr r3, [pc, #144] ; (800240c ) + 800237c: 685b ldr r3, [r3, #4] + 800237e: 220c movs r2, #12 + 8002380: 401a ands r2, r3 + 8002382: 687b ldr r3, [r7, #4] + 8002384: 685b ldr r3, [r3, #4] + 8002386: 009b lsls r3, r3, #2 + 8002388: 429a cmp r2, r3 + 800238a: d1ec bne.n 8002366 + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + 800238c: 4b1e ldr r3, [pc, #120] ; (8002408 ) + 800238e: 681b ldr r3, [r3, #0] + 8002390: 2201 movs r2, #1 + 8002392: 4013 ands r3, r2 + 8002394: 683a ldr r2, [r7, #0] + 8002396: 429a cmp r2, r3 + 8002398: d211 bcs.n 80023be + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 800239a: 4b1b ldr r3, [pc, #108] ; (8002408 ) + 800239c: 681b ldr r3, [r3, #0] + 800239e: 2201 movs r2, #1 + 80023a0: 4393 bics r3, r2 + 80023a2: 0019 movs r1, r3 + 80023a4: 4b18 ldr r3, [pc, #96] ; (8002408 ) + 80023a6: 683a ldr r2, [r7, #0] + 80023a8: 430a orrs r2, r1 + 80023aa: 601a str r2, [r3, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + 80023ac: 4b16 ldr r3, [pc, #88] ; (8002408 ) + 80023ae: 681b ldr r3, [r3, #0] + 80023b0: 2201 movs r2, #1 + 80023b2: 4013 ands r3, r2 + 80023b4: 683a ldr r2, [r7, #0] + 80023b6: 429a cmp r2, r3 + 80023b8: d001 beq.n 80023be + { + return HAL_ERROR; + 80023ba: 2301 movs r3, #1 + 80023bc: e020 b.n 8002400 + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + 80023be: 687b ldr r3, [r7, #4] + 80023c0: 681b ldr r3, [r3, #0] + 80023c2: 2204 movs r2, #4 + 80023c4: 4013 ands r3, r2 + 80023c6: d009 beq.n 80023dc + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + 80023c8: 4b10 ldr r3, [pc, #64] ; (800240c ) + 80023ca: 685b ldr r3, [r3, #4] + 80023cc: 4a11 ldr r2, [pc, #68] ; (8002414 ) + 80023ce: 4013 ands r3, r2 + 80023d0: 0019 movs r1, r3 + 80023d2: 687b ldr r3, [r7, #4] + 80023d4: 68da ldr r2, [r3, #12] + 80023d6: 4b0d ldr r3, [pc, #52] ; (800240c ) + 80023d8: 430a orrs r2, r1 + 80023da: 605a str r2, [r3, #4] + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER]; + 80023dc: f000 f820 bl 8002420 + 80023e0: 0001 movs r1, r0 + 80023e2: 4b0a ldr r3, [pc, #40] ; (800240c ) + 80023e4: 685b ldr r3, [r3, #4] + 80023e6: 091b lsrs r3, r3, #4 + 80023e8: 220f movs r2, #15 + 80023ea: 4013 ands r3, r2 + 80023ec: 4a0a ldr r2, [pc, #40] ; (8002418 ) + 80023ee: 5cd3 ldrb r3, [r2, r3] + 80023f0: 000a movs r2, r1 + 80023f2: 40da lsrs r2, r3 + 80023f4: 4b09 ldr r3, [pc, #36] ; (800241c ) + 80023f6: 601a str r2, [r3, #0] + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick (TICK_INT_PRIORITY); + 80023f8: 2000 movs r0, #0 + 80023fa: f7ff f911 bl 8001620 + + return HAL_OK; + 80023fe: 2300 movs r3, #0 +} + 8002400: 0018 movs r0, r3 + 8002402: 46bd mov sp, r7 + 8002404: b004 add sp, #16 + 8002406: bd80 pop {r7, pc} + 8002408: 40022000 .word 0x40022000 + 800240c: 40021000 .word 0x40021000 + 8002410: 00001388 .word 0x00001388 + 8002414: fffff8ff .word 0xfffff8ff + 8002418: 080030d4 .word 0x080030d4 + 800241c: 20000004 .word 0x20000004 + +08002420 : + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + 8002420: b590 push {r4, r7, lr} + 8002422: b08f sub sp, #60 ; 0x3c + 8002424: af00 add r7, sp, #0 + const uint8_t aPLLMULFactorTable[16] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U, + 8002426: 2314 movs r3, #20 + 8002428: 18fb adds r3, r7, r3 + 800242a: 4a2b ldr r2, [pc, #172] ; (80024d8 ) + 800242c: ca13 ldmia r2!, {r0, r1, r4} + 800242e: c313 stmia r3!, {r0, r1, r4} + 8002430: 6812 ldr r2, [r2, #0] + 8002432: 601a str r2, [r3, #0] + 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U}; + const uint8_t aPredivFactorTable[16] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U, + 8002434: 1d3b adds r3, r7, #4 + 8002436: 4a29 ldr r2, [pc, #164] ; (80024dc ) + 8002438: ca13 ldmia r2!, {r0, r1, r4} + 800243a: c313 stmia r3!, {r0, r1, r4} + 800243c: 6812 ldr r2, [r2, #0] + 800243e: 601a str r2, [r3, #0] + 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U}; + + uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; + 8002440: 2300 movs r3, #0 + 8002442: 62fb str r3, [r7, #44] ; 0x2c + 8002444: 2300 movs r3, #0 + 8002446: 62bb str r3, [r7, #40] ; 0x28 + 8002448: 2300 movs r3, #0 + 800244a: 637b str r3, [r7, #52] ; 0x34 + 800244c: 2300 movs r3, #0 + 800244e: 627b str r3, [r7, #36] ; 0x24 + uint32_t sysclockfreq = 0U; + 8002450: 2300 movs r3, #0 + 8002452: 633b str r3, [r7, #48] ; 0x30 + + tmpreg = RCC->CFGR; + 8002454: 4b22 ldr r3, [pc, #136] ; (80024e0 ) + 8002456: 685b ldr r3, [r3, #4] + 8002458: 62fb str r3, [r7, #44] ; 0x2c + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + 800245a: 6afb ldr r3, [r7, #44] ; 0x2c + 800245c: 220c movs r2, #12 + 800245e: 4013 ands r3, r2 + 8002460: 2b04 cmp r3, #4 + 8002462: d002 beq.n 800246a + 8002464: 2b08 cmp r3, #8 + 8002466: d003 beq.n 8002470 + 8002468: e02d b.n 80024c6 + { + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + 800246a: 4b1e ldr r3, [pc, #120] ; (80024e4 ) + 800246c: 633b str r3, [r7, #48] ; 0x30 + break; + 800246e: e02d b.n 80024cc + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER]; + 8002470: 6afb ldr r3, [r7, #44] ; 0x2c + 8002472: 0c9b lsrs r3, r3, #18 + 8002474: 220f movs r2, #15 + 8002476: 4013 ands r3, r2 + 8002478: 2214 movs r2, #20 + 800247a: 18ba adds r2, r7, r2 + 800247c: 5cd3 ldrb r3, [r2, r3] + 800247e: 627b str r3, [r7, #36] ; 0x24 + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER]; + 8002480: 4b17 ldr r3, [pc, #92] ; (80024e0 ) + 8002482: 6adb ldr r3, [r3, #44] ; 0x2c + 8002484: 220f movs r2, #15 + 8002486: 4013 ands r3, r2 + 8002488: 1d3a adds r2, r7, #4 + 800248a: 5cd3 ldrb r3, [r2, r3] + 800248c: 62bb str r3, [r7, #40] ; 0x28 + if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + 800248e: 6afa ldr r2, [r7, #44] ; 0x2c + 8002490: 2380 movs r3, #128 ; 0x80 + 8002492: 025b lsls r3, r3, #9 + 8002494: 4013 ands r3, r2 + 8002496: d009 beq.n 80024ac + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSE_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); + 8002498: 6ab9 ldr r1, [r7, #40] ; 0x28 + 800249a: 4812 ldr r0, [pc, #72] ; (80024e4 ) + 800249c: f7fd fe3c bl 8000118 <__udivsi3> + 80024a0: 0003 movs r3, r0 + 80024a2: 001a movs r2, r3 + 80024a4: 6a7b ldr r3, [r7, #36] ; 0x24 + 80024a6: 4353 muls r3, r2 + 80024a8: 637b str r3, [r7, #52] ; 0x34 + 80024aa: e009 b.n 80024c0 +#if (defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)) + /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSI_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); +#else + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((uint64_t) (HSI_VALUE >> 1U) * ((uint64_t) pllmul)); + 80024ac: 6a79 ldr r1, [r7, #36] ; 0x24 + 80024ae: 000a movs r2, r1 + 80024b0: 0152 lsls r2, r2, #5 + 80024b2: 1a52 subs r2, r2, r1 + 80024b4: 0193 lsls r3, r2, #6 + 80024b6: 1a9b subs r3, r3, r2 + 80024b8: 00db lsls r3, r3, #3 + 80024ba: 185b adds r3, r3, r1 + 80024bc: 021b lsls r3, r3, #8 + 80024be: 637b str r3, [r7, #52] ; 0x34 +#endif + } + sysclockfreq = pllclk; + 80024c0: 6b7b ldr r3, [r7, #52] ; 0x34 + 80024c2: 633b str r3, [r7, #48] ; 0x30 + break; + 80024c4: e002 b.n 80024cc + } +#endif /* RCC_CFGR_SWS_HSI48 */ + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: /* HSI used as system clock */ + { + sysclockfreq = HSI_VALUE; + 80024c6: 4b07 ldr r3, [pc, #28] ; (80024e4 ) + 80024c8: 633b str r3, [r7, #48] ; 0x30 + break; + 80024ca: 46c0 nop ; (mov r8, r8) + } + } + return sysclockfreq; + 80024cc: 6b3b ldr r3, [r7, #48] ; 0x30 +} + 80024ce: 0018 movs r0, r3 + 80024d0: 46bd mov sp, r7 + 80024d2: b00f add sp, #60 ; 0x3c + 80024d4: bd90 pop {r4, r7, pc} + 80024d6: 46c0 nop ; (mov r8, r8) + 80024d8: 080030a0 .word 0x080030a0 + 80024dc: 080030b0 .word 0x080030b0 + 80024e0: 40021000 .word 0x40021000 + 80024e4: 007a1200 .word 0x007a1200 + +080024e8 : + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + 80024e8: b580 push {r7, lr} + 80024ea: af00 add r7, sp, #0 + return SystemCoreClock; + 80024ec: 4b02 ldr r3, [pc, #8] ; (80024f8 ) + 80024ee: 681b ldr r3, [r3, #0] +} + 80024f0: 0018 movs r0, r3 + 80024f2: 46bd mov sp, r7 + 80024f4: bd80 pop {r7, pc} + 80024f6: 46c0 nop ; (mov r8, r8) + 80024f8: 20000004 .word 0x20000004 + +080024fc : + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + 80024fc: b580 push {r7, lr} + 80024fe: af00 add r7, sp, #0 + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE) >> RCC_CFGR_PPRE_BITNUMBER]); + 8002500: f7ff fff2 bl 80024e8 + 8002504: 0001 movs r1, r0 + 8002506: 4b06 ldr r3, [pc, #24] ; (8002520 ) + 8002508: 685b ldr r3, [r3, #4] + 800250a: 0a1b lsrs r3, r3, #8 + 800250c: 2207 movs r2, #7 + 800250e: 4013 ands r3, r2 + 8002510: 4a04 ldr r2, [pc, #16] ; (8002524 ) + 8002512: 5cd3 ldrb r3, [r2, r3] + 8002514: 40d9 lsrs r1, r3 + 8002516: 000b movs r3, r1 +} + 8002518: 0018 movs r0, r3 + 800251a: 46bd mov sp, r7 + 800251c: bd80 pop {r7, pc} + 800251e: 46c0 nop ; (mov r8, r8) + 8002520: 40021000 .word 0x40021000 + 8002524: 080030e4 .word 0x080030e4 + +08002528 : + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + 8002528: b580 push {r7, lr} + 800252a: b086 sub sp, #24 + 800252c: af00 add r7, sp, #0 + 800252e: 6078 str r0, [r7, #4] + uint32_t tickstart = 0U; + 8002530: 2300 movs r3, #0 + 8002532: 613b str r3, [r7, #16] + uint32_t temp_reg = 0U; + 8002534: 2300 movs r3, #0 + 8002536: 60fb str r3, [r7, #12] + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*---------------------------- RTC configuration -------------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + 8002538: 687b ldr r3, [r7, #4] + 800253a: 681a ldr r2, [r3, #0] + 800253c: 2380 movs r3, #128 ; 0x80 + 800253e: 025b lsls r3, r3, #9 + 8002540: 4013 ands r3, r2 + 8002542: d100 bne.n 8002546 + 8002544: e08f b.n 8002666 + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + FlagStatus pwrclkchanged = RESET; + 8002546: 2317 movs r3, #23 + 8002548: 18fb adds r3, r7, r3 + 800254a: 2200 movs r2, #0 + 800254c: 701a strb r2, [r3, #0] + + /* As soon as function is called to change RTC clock source, activation of the + power domain is done. */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + 800254e: 4b57 ldr r3, [pc, #348] ; (80026ac ) + 8002550: 69da ldr r2, [r3, #28] + 8002552: 2380 movs r3, #128 ; 0x80 + 8002554: 055b lsls r3, r3, #21 + 8002556: 4013 ands r3, r2 + 8002558: d111 bne.n 800257e + { + __HAL_RCC_PWR_CLK_ENABLE(); + 800255a: 4b54 ldr r3, [pc, #336] ; (80026ac ) + 800255c: 69da ldr r2, [r3, #28] + 800255e: 4b53 ldr r3, [pc, #332] ; (80026ac ) + 8002560: 2180 movs r1, #128 ; 0x80 + 8002562: 0549 lsls r1, r1, #21 + 8002564: 430a orrs r2, r1 + 8002566: 61da str r2, [r3, #28] + 8002568: 4b50 ldr r3, [pc, #320] ; (80026ac ) + 800256a: 69da ldr r2, [r3, #28] + 800256c: 2380 movs r3, #128 ; 0x80 + 800256e: 055b lsls r3, r3, #21 + 8002570: 4013 ands r3, r2 + 8002572: 60bb str r3, [r7, #8] + 8002574: 68bb ldr r3, [r7, #8] + pwrclkchanged = SET; + 8002576: 2317 movs r3, #23 + 8002578: 18fb adds r3, r7, r3 + 800257a: 2201 movs r2, #1 + 800257c: 701a strb r2, [r3, #0] + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 800257e: 4b4c ldr r3, [pc, #304] ; (80026b0 ) + 8002580: 681a ldr r2, [r3, #0] + 8002582: 2380 movs r3, #128 ; 0x80 + 8002584: 005b lsls r3, r3, #1 + 8002586: 4013 ands r3, r2 + 8002588: d11a bne.n 80025c0 + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + 800258a: 4b49 ldr r3, [pc, #292] ; (80026b0 ) + 800258c: 681a ldr r2, [r3, #0] + 800258e: 4b48 ldr r3, [pc, #288] ; (80026b0 ) + 8002590: 2180 movs r1, #128 ; 0x80 + 8002592: 0049 lsls r1, r1, #1 + 8002594: 430a orrs r2, r1 + 8002596: 601a str r2, [r3, #0] + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + 8002598: f7ff f888 bl 80016ac + 800259c: 0003 movs r3, r0 + 800259e: 613b str r3, [r7, #16] + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 80025a0: e008 b.n 80025b4 + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + 80025a2: f7ff f883 bl 80016ac + 80025a6: 0002 movs r2, r0 + 80025a8: 693b ldr r3, [r7, #16] + 80025aa: 1ad3 subs r3, r2, r3 + 80025ac: 2b64 cmp r3, #100 ; 0x64 + 80025ae: d901 bls.n 80025b4 + { + return HAL_TIMEOUT; + 80025b0: 2303 movs r3, #3 + 80025b2: e077 b.n 80026a4 + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + 80025b4: 4b3e ldr r3, [pc, #248] ; (80026b0 ) + 80025b6: 681a ldr r2, [r3, #0] + 80025b8: 2380 movs r3, #128 ; 0x80 + 80025ba: 005b lsls r3, r3, #1 + 80025bc: 4013 ands r3, r2 + 80025be: d0f0 beq.n 80025a2 + } + } + } + + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL); + 80025c0: 4b3a ldr r3, [pc, #232] ; (80026ac ) + 80025c2: 6a1a ldr r2, [r3, #32] + 80025c4: 23c0 movs r3, #192 ; 0xc0 + 80025c6: 009b lsls r3, r3, #2 + 80025c8: 4013 ands r3, r2 + 80025ca: 60fb str r3, [r7, #12] + if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + 80025cc: 68fb ldr r3, [r7, #12] + 80025ce: 2b00 cmp r3, #0 + 80025d0: d034 beq.n 800263c + 80025d2: 687b ldr r3, [r7, #4] + 80025d4: 685a ldr r2, [r3, #4] + 80025d6: 23c0 movs r3, #192 ; 0xc0 + 80025d8: 009b lsls r3, r3, #2 + 80025da: 4013 ands r3, r2 + 80025dc: 68fa ldr r2, [r7, #12] + 80025de: 429a cmp r2, r3 + 80025e0: d02c beq.n 800263c + { + /* Store the content of BDCR register before the reset of Backup Domain */ + temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + 80025e2: 4b32 ldr r3, [pc, #200] ; (80026ac ) + 80025e4: 6a1b ldr r3, [r3, #32] + 80025e6: 4a33 ldr r2, [pc, #204] ; (80026b4 ) + 80025e8: 4013 ands r3, r2 + 80025ea: 60fb str r3, [r7, #12] + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + 80025ec: 4b2f ldr r3, [pc, #188] ; (80026ac ) + 80025ee: 6a1a ldr r2, [r3, #32] + 80025f0: 4b2e ldr r3, [pc, #184] ; (80026ac ) + 80025f2: 2180 movs r1, #128 ; 0x80 + 80025f4: 0249 lsls r1, r1, #9 + 80025f6: 430a orrs r2, r1 + 80025f8: 621a str r2, [r3, #32] + __HAL_RCC_BACKUPRESET_RELEASE(); + 80025fa: 4b2c ldr r3, [pc, #176] ; (80026ac ) + 80025fc: 6a1a ldr r2, [r3, #32] + 80025fe: 4b2b ldr r3, [pc, #172] ; (80026ac ) + 8002600: 492d ldr r1, [pc, #180] ; (80026b8 ) + 8002602: 400a ands r2, r1 + 8002604: 621a str r2, [r3, #32] + /* Restore the Content of BDCR register */ + RCC->BDCR = temp_reg; + 8002606: 4b29 ldr r3, [pc, #164] ; (80026ac ) + 8002608: 68fa ldr r2, [r7, #12] + 800260a: 621a str r2, [r3, #32] + + /* Wait for LSERDY if LSE was enabled */ + if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON)) + 800260c: 68fb ldr r3, [r7, #12] + 800260e: 2201 movs r2, #1 + 8002610: 4013 ands r3, r2 + 8002612: d013 beq.n 800263c + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + 8002614: f7ff f84a bl 80016ac + 8002618: 0003 movs r3, r0 + 800261a: 613b str r3, [r7, #16] + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 800261c: e009 b.n 8002632 + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + 800261e: f7ff f845 bl 80016ac + 8002622: 0002 movs r2, r0 + 8002624: 693b ldr r3, [r7, #16] + 8002626: 1ad3 subs r3, r2, r3 + 8002628: 4a24 ldr r2, [pc, #144] ; (80026bc ) + 800262a: 4293 cmp r3, r2 + 800262c: d901 bls.n 8002632 + { + return HAL_TIMEOUT; + 800262e: 2303 movs r3, #3 + 8002630: e038 b.n 80026a4 + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + 8002632: 4b1e ldr r3, [pc, #120] ; (80026ac ) + 8002634: 6a1b ldr r3, [r3, #32] + 8002636: 2202 movs r2, #2 + 8002638: 4013 ands r3, r2 + 800263a: d0f0 beq.n 800261e + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + 800263c: 4b1b ldr r3, [pc, #108] ; (80026ac ) + 800263e: 6a1b ldr r3, [r3, #32] + 8002640: 4a1c ldr r2, [pc, #112] ; (80026b4 ) + 8002642: 4013 ands r3, r2 + 8002644: 0019 movs r1, r3 + 8002646: 687b ldr r3, [r7, #4] + 8002648: 685a ldr r2, [r3, #4] + 800264a: 4b18 ldr r3, [pc, #96] ; (80026ac ) + 800264c: 430a orrs r2, r1 + 800264e: 621a str r2, [r3, #32] + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + 8002650: 2317 movs r3, #23 + 8002652: 18fb adds r3, r7, r3 + 8002654: 781b ldrb r3, [r3, #0] + 8002656: 2b01 cmp r3, #1 + 8002658: d105 bne.n 8002666 + { + __HAL_RCC_PWR_CLK_DISABLE(); + 800265a: 4b14 ldr r3, [pc, #80] ; (80026ac ) + 800265c: 69da ldr r2, [r3, #28] + 800265e: 4b13 ldr r3, [pc, #76] ; (80026ac ) + 8002660: 4917 ldr r1, [pc, #92] ; (80026c0 ) + 8002662: 400a ands r2, r1 + 8002664: 61da str r2, [r3, #28] + } + } + + /*------------------------------- USART1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + 8002666: 687b ldr r3, [r7, #4] + 8002668: 681b ldr r3, [r3, #0] + 800266a: 2201 movs r2, #1 + 800266c: 4013 ands r3, r2 + 800266e: d009 beq.n 8002684 + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + 8002670: 4b0e ldr r3, [pc, #56] ; (80026ac ) + 8002672: 6b1b ldr r3, [r3, #48] ; 0x30 + 8002674: 2203 movs r2, #3 + 8002676: 4393 bics r3, r2 + 8002678: 0019 movs r1, r3 + 800267a: 687b ldr r3, [r7, #4] + 800267c: 689a ldr r2, [r3, #8] + 800267e: 4b0b ldr r3, [pc, #44] ; (80026ac ) + 8002680: 430a orrs r2, r1 + 8002682: 631a str r2, [r3, #48] ; 0x30 + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } +#endif /* STM32F091xC || STM32F098xx */ + + /*------------------------------ I2C1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + 8002684: 687b ldr r3, [r7, #4] + 8002686: 681b ldr r3, [r3, #0] + 8002688: 2220 movs r2, #32 + 800268a: 4013 ands r3, r2 + 800268c: d009 beq.n 80026a2 + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + 800268e: 4b07 ldr r3, [pc, #28] ; (80026ac ) + 8002690: 6b1b ldr r3, [r3, #48] ; 0x30 + 8002692: 2210 movs r2, #16 + 8002694: 4393 bics r3, r2 + 8002696: 0019 movs r1, r3 + 8002698: 687b ldr r3, [r7, #4] + 800269a: 68da ldr r2, [r3, #12] + 800269c: 4b03 ldr r3, [pc, #12] ; (80026ac ) + 800269e: 430a orrs r2, r1 + 80026a0: 631a str r2, [r3, #48] ; 0x30 +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + + return HAL_OK; + 80026a2: 2300 movs r3, #0 +} + 80026a4: 0018 movs r0, r3 + 80026a6: 46bd mov sp, r7 + 80026a8: b006 add sp, #24 + 80026aa: bd80 pop {r7, pc} + 80026ac: 40021000 .word 0x40021000 + 80026b0: 40007000 .word 0x40007000 + 80026b4: fffffcff .word 0xfffffcff + 80026b8: fffeffff .word 0xfffeffff + 80026bc: 00001388 .word 0x00001388 + 80026c0: efffffff .word 0xefffffff + +080026c4 : + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + 80026c4: b580 push {r7, lr} + 80026c6: b082 sub sp, #8 + 80026c8: af00 add r7, sp, #0 + 80026ca: 6078 str r0, [r7, #4] + /* Check the UART handle allocation */ + if (huart == NULL) + 80026cc: 687b ldr r3, [r7, #4] + 80026ce: 2b00 cmp r3, #0 + 80026d0: d101 bne.n 80026d6 + { + return HAL_ERROR; + 80026d2: 2301 movs r3, #1 + 80026d4: e044 b.n 8002760 + { + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + } + + if (huart->gState == HAL_UART_STATE_RESET) + 80026d6: 687b ldr r3, [r7, #4] + 80026d8: 6f9b ldr r3, [r3, #120] ; 0x78 + 80026da: 2b00 cmp r3, #0 + 80026dc: d107 bne.n 80026ee + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + 80026de: 687b ldr r3, [r7, #4] + 80026e0: 2274 movs r2, #116 ; 0x74 + 80026e2: 2100 movs r1, #0 + 80026e4: 5499 strb r1, [r3, r2] + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); + 80026e6: 687b ldr r3, [r7, #4] + 80026e8: 0018 movs r0, r3 + 80026ea: f7fe fe9d bl 8001428 +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + 80026ee: 687b ldr r3, [r7, #4] + 80026f0: 2224 movs r2, #36 ; 0x24 + 80026f2: 679a str r2, [r3, #120] ; 0x78 + + __HAL_UART_DISABLE(huart); + 80026f4: 687b ldr r3, [r7, #4] + 80026f6: 681b ldr r3, [r3, #0] + 80026f8: 681a ldr r2, [r3, #0] + 80026fa: 687b ldr r3, [r7, #4] + 80026fc: 681b ldr r3, [r3, #0] + 80026fe: 2101 movs r1, #1 + 8002700: 438a bics r2, r1 + 8002702: 601a str r2, [r3, #0] + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + 8002704: 687b ldr r3, [r7, #4] + 8002706: 0018 movs r0, r3 + 8002708: f000 f8da bl 80028c0 + 800270c: 0003 movs r3, r0 + 800270e: 2b01 cmp r3, #1 + 8002710: d101 bne.n 8002716 + { + return HAL_ERROR; + 8002712: 2301 movs r3, #1 + 8002714: e024 b.n 8002760 + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + 8002716: 687b ldr r3, [r7, #4] + 8002718: 6a5b ldr r3, [r3, #36] ; 0x24 + 800271a: 2b00 cmp r3, #0 + 800271c: d003 beq.n 8002726 + { + UART_AdvFeatureConfig(huart); + 800271e: 687b ldr r3, [r7, #4] + 8002720: 0018 movs r0, r3 + 8002722: f000 f9f3 bl 8002b0c + - LINEN (if LIN is supported) and CLKEN bits in the USART_CR2 register, + - SCEN (if Smartcard is supported), HDSEL and IREN (if IrDA is supported) bits in the USART_CR3 register.*/ +#if defined (USART_CR2_LINEN) + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#else + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + 8002726: 687b ldr r3, [r7, #4] + 8002728: 681b ldr r3, [r3, #0] + 800272a: 685a ldr r2, [r3, #4] + 800272c: 687b ldr r3, [r7, #4] + 800272e: 681b ldr r3, [r3, #0] + 8002730: 490d ldr r1, [pc, #52] ; (8002768 ) + 8002732: 400a ands r2, r1 + 8002734: 605a str r2, [r3, #4] +#endif /* USART_CR3_IREN */ +#else +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + 8002736: 687b ldr r3, [r7, #4] + 8002738: 681b ldr r3, [r3, #0] + 800273a: 689a ldr r2, [r3, #8] + 800273c: 687b ldr r3, [r7, #4] + 800273e: 681b ldr r3, [r3, #0] + 8002740: 2108 movs r1, #8 + 8002742: 438a bics r2, r1 + 8002744: 609a str r2, [r3, #8] +#endif /* USART_CR3_IREN*/ +#endif /* USART_CR3_SCEN */ + + __HAL_UART_ENABLE(huart); + 8002746: 687b ldr r3, [r7, #4] + 8002748: 681b ldr r3, [r3, #0] + 800274a: 681a ldr r2, [r3, #0] + 800274c: 687b ldr r3, [r7, #4] + 800274e: 681b ldr r3, [r3, #0] + 8002750: 2101 movs r1, #1 + 8002752: 430a orrs r2, r1 + 8002754: 601a str r2, [r3, #0] + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); + 8002756: 687b ldr r3, [r7, #4] + 8002758: 0018 movs r0, r3 + 800275a: f000 fa8b bl 8002c74 + 800275e: 0003 movs r3, r0 +} + 8002760: 0018 movs r0, r3 + 8002762: 46bd mov sp, r7 + 8002764: b002 add sp, #8 + 8002766: bd80 pop {r7, pc} + 8002768: fffff7ff .word 0xfffff7ff + +0800276c : + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + 800276c: b580 push {r7, lr} + 800276e: b08a sub sp, #40 ; 0x28 + 8002770: af02 add r7, sp, #8 + 8002772: 60f8 str r0, [r7, #12] + 8002774: 60b9 str r1, [r7, #8] + 8002776: 603b str r3, [r7, #0] + 8002778: 1dbb adds r3, r7, #6 + 800277a: 801a strh r2, [r3, #0] + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + 800277c: 68fb ldr r3, [r7, #12] + 800277e: 6f9b ldr r3, [r3, #120] ; 0x78 + 8002780: 2b20 cmp r3, #32 + 8002782: d000 beq.n 8002786 + 8002784: e096 b.n 80028b4 + { + if ((pData == NULL) || (Size == 0U)) + 8002786: 68bb ldr r3, [r7, #8] + 8002788: 2b00 cmp r3, #0 + 800278a: d003 beq.n 8002794 + 800278c: 1dbb adds r3, r7, #6 + 800278e: 881b ldrh r3, [r3, #0] + 8002790: 2b00 cmp r3, #0 + 8002792: d101 bne.n 8002798 + { + return HAL_ERROR; + 8002794: 2301 movs r3, #1 + 8002796: e08e b.n 80028b6 + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + 8002798: 68fb ldr r3, [r7, #12] + 800279a: 689a ldr r2, [r3, #8] + 800279c: 2380 movs r3, #128 ; 0x80 + 800279e: 015b lsls r3, r3, #5 + 80027a0: 429a cmp r2, r3 + 80027a2: d109 bne.n 80027b8 + 80027a4: 68fb ldr r3, [r7, #12] + 80027a6: 691b ldr r3, [r3, #16] + 80027a8: 2b00 cmp r3, #0 + 80027aa: d105 bne.n 80027b8 + { + if ((((uint32_t)pData) & 1U) != 0U) + 80027ac: 68bb ldr r3, [r7, #8] + 80027ae: 2201 movs r2, #1 + 80027b0: 4013 ands r3, r2 + 80027b2: d001 beq.n 80027b8 + { + return HAL_ERROR; + 80027b4: 2301 movs r3, #1 + 80027b6: e07e b.n 80028b6 + } + } + + __HAL_LOCK(huart); + 80027b8: 68fb ldr r3, [r7, #12] + 80027ba: 2274 movs r2, #116 ; 0x74 + 80027bc: 5c9b ldrb r3, [r3, r2] + 80027be: 2b01 cmp r3, #1 + 80027c0: d101 bne.n 80027c6 + 80027c2: 2302 movs r3, #2 + 80027c4: e077 b.n 80028b6 + 80027c6: 68fb ldr r3, [r7, #12] + 80027c8: 2274 movs r2, #116 ; 0x74 + 80027ca: 2101 movs r1, #1 + 80027cc: 5499 strb r1, [r3, r2] + + huart->ErrorCode = HAL_UART_ERROR_NONE; + 80027ce: 68fb ldr r3, [r7, #12] + 80027d0: 2280 movs r2, #128 ; 0x80 + 80027d2: 2100 movs r1, #0 + 80027d4: 5099 str r1, [r3, r2] + huart->gState = HAL_UART_STATE_BUSY_TX; + 80027d6: 68fb ldr r3, [r7, #12] + 80027d8: 2221 movs r2, #33 ; 0x21 + 80027da: 679a str r2, [r3, #120] ; 0x78 + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + 80027dc: f7fe ff66 bl 80016ac + 80027e0: 0003 movs r3, r0 + 80027e2: 617b str r3, [r7, #20] + + huart->TxXferSize = Size; + 80027e4: 68fb ldr r3, [r7, #12] + 80027e6: 1dba adds r2, r7, #6 + 80027e8: 2150 movs r1, #80 ; 0x50 + 80027ea: 8812 ldrh r2, [r2, #0] + 80027ec: 525a strh r2, [r3, r1] + huart->TxXferCount = Size; + 80027ee: 68fb ldr r3, [r7, #12] + 80027f0: 1dba adds r2, r7, #6 + 80027f2: 2152 movs r1, #82 ; 0x52 + 80027f4: 8812 ldrh r2, [r2, #0] + 80027f6: 525a strh r2, [r3, r1] + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + 80027f8: 68fb ldr r3, [r7, #12] + 80027fa: 689a ldr r2, [r3, #8] + 80027fc: 2380 movs r3, #128 ; 0x80 + 80027fe: 015b lsls r3, r3, #5 + 8002800: 429a cmp r2, r3 + 8002802: d108 bne.n 8002816 + 8002804: 68fb ldr r3, [r7, #12] + 8002806: 691b ldr r3, [r3, #16] + 8002808: 2b00 cmp r3, #0 + 800280a: d104 bne.n 8002816 + { + pdata8bits = NULL; + 800280c: 2300 movs r3, #0 + 800280e: 61fb str r3, [r7, #28] + pdata16bits = (uint16_t *) pData; + 8002810: 68bb ldr r3, [r7, #8] + 8002812: 61bb str r3, [r7, #24] + 8002814: e003 b.n 800281e + } + else + { + pdata8bits = pData; + 8002816: 68bb ldr r3, [r7, #8] + 8002818: 61fb str r3, [r7, #28] + pdata16bits = NULL; + 800281a: 2300 movs r3, #0 + 800281c: 61bb str r3, [r7, #24] + } + + __HAL_UNLOCK(huart); + 800281e: 68fb ldr r3, [r7, #12] + 8002820: 2274 movs r2, #116 ; 0x74 + 8002822: 2100 movs r1, #0 + 8002824: 5499 strb r1, [r3, r2] + + while (huart->TxXferCount > 0U) + 8002826: e02d b.n 8002884 + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + 8002828: 697a ldr r2, [r7, #20] + 800282a: 68f8 ldr r0, [r7, #12] + 800282c: 683b ldr r3, [r7, #0] + 800282e: 9300 str r3, [sp, #0] + 8002830: 0013 movs r3, r2 + 8002832: 2200 movs r2, #0 + 8002834: 2180 movs r1, #128 ; 0x80 + 8002836: f000 fa67 bl 8002d08 + 800283a: 1e03 subs r3, r0, #0 + 800283c: d001 beq.n 8002842 + { + return HAL_TIMEOUT; + 800283e: 2303 movs r3, #3 + 8002840: e039 b.n 80028b6 + } + if (pdata8bits == NULL) + 8002842: 69fb ldr r3, [r7, #28] + 8002844: 2b00 cmp r3, #0 + 8002846: d10b bne.n 8002860 + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + 8002848: 69bb ldr r3, [r7, #24] + 800284a: 881a ldrh r2, [r3, #0] + 800284c: 68fb ldr r3, [r7, #12] + 800284e: 681b ldr r3, [r3, #0] + 8002850: 05d2 lsls r2, r2, #23 + 8002852: 0dd2 lsrs r2, r2, #23 + 8002854: b292 uxth r2, r2 + 8002856: 851a strh r2, [r3, #40] ; 0x28 + pdata16bits++; + 8002858: 69bb ldr r3, [r7, #24] + 800285a: 3302 adds r3, #2 + 800285c: 61bb str r3, [r7, #24] + 800285e: e008 b.n 8002872 + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + 8002860: 69fb ldr r3, [r7, #28] + 8002862: 781a ldrb r2, [r3, #0] + 8002864: 68fb ldr r3, [r7, #12] + 8002866: 681b ldr r3, [r3, #0] + 8002868: b292 uxth r2, r2 + 800286a: 851a strh r2, [r3, #40] ; 0x28 + pdata8bits++; + 800286c: 69fb ldr r3, [r7, #28] + 800286e: 3301 adds r3, #1 + 8002870: 61fb str r3, [r7, #28] + } + huart->TxXferCount--; + 8002872: 68fb ldr r3, [r7, #12] + 8002874: 2252 movs r2, #82 ; 0x52 + 8002876: 5a9b ldrh r3, [r3, r2] + 8002878: b29b uxth r3, r3 + 800287a: 3b01 subs r3, #1 + 800287c: b299 uxth r1, r3 + 800287e: 68fb ldr r3, [r7, #12] + 8002880: 2252 movs r2, #82 ; 0x52 + 8002882: 5299 strh r1, [r3, r2] + while (huart->TxXferCount > 0U) + 8002884: 68fb ldr r3, [r7, #12] + 8002886: 2252 movs r2, #82 ; 0x52 + 8002888: 5a9b ldrh r3, [r3, r2] + 800288a: b29b uxth r3, r3 + 800288c: 2b00 cmp r3, #0 + 800288e: d1cb bne.n 8002828 + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + 8002890: 697a ldr r2, [r7, #20] + 8002892: 68f8 ldr r0, [r7, #12] + 8002894: 683b ldr r3, [r7, #0] + 8002896: 9300 str r3, [sp, #0] + 8002898: 0013 movs r3, r2 + 800289a: 2200 movs r2, #0 + 800289c: 2140 movs r1, #64 ; 0x40 + 800289e: f000 fa33 bl 8002d08 + 80028a2: 1e03 subs r3, r0, #0 + 80028a4: d001 beq.n 80028aa + { + return HAL_TIMEOUT; + 80028a6: 2303 movs r3, #3 + 80028a8: e005 b.n 80028b6 + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + 80028aa: 68fb ldr r3, [r7, #12] + 80028ac: 2220 movs r2, #32 + 80028ae: 679a str r2, [r3, #120] ; 0x78 + + return HAL_OK; + 80028b0: 2300 movs r3, #0 + 80028b2: e000 b.n 80028b6 + } + else + { + return HAL_BUSY; + 80028b4: 2302 movs r3, #2 + } +} + 80028b6: 0018 movs r0, r3 + 80028b8: 46bd mov sp, r7 + 80028ba: b008 add sp, #32 + 80028bc: bd80 pop {r7, pc} + ... + +080028c0 : + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + 80028c0: b580 push {r7, lr} + 80028c2: b088 sub sp, #32 + 80028c4: af00 add r7, sp, #0 + 80028c6: 6078 str r0, [r7, #4] + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + 80028c8: 231e movs r3, #30 + 80028ca: 18fb adds r3, r7, r3 + 80028cc: 2200 movs r2, #0 + 80028ce: 701a strb r2, [r3, #0] + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + 80028d0: 687b ldr r3, [r7, #4] + 80028d2: 689a ldr r2, [r3, #8] + 80028d4: 687b ldr r3, [r7, #4] + 80028d6: 691b ldr r3, [r3, #16] + 80028d8: 431a orrs r2, r3 + 80028da: 687b ldr r3, [r7, #4] + 80028dc: 695b ldr r3, [r3, #20] + 80028de: 431a orrs r2, r3 + 80028e0: 687b ldr r3, [r7, #4] + 80028e2: 69db ldr r3, [r3, #28] + 80028e4: 4313 orrs r3, r2 + 80028e6: 617b str r3, [r7, #20] + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + 80028e8: 687b ldr r3, [r7, #4] + 80028ea: 681b ldr r3, [r3, #0] + 80028ec: 681b ldr r3, [r3, #0] + 80028ee: 4a81 ldr r2, [pc, #516] ; (8002af4 ) + 80028f0: 4013 ands r3, r2 + 80028f2: 0019 movs r1, r3 + 80028f4: 687b ldr r3, [r7, #4] + 80028f6: 681b ldr r3, [r3, #0] + 80028f8: 697a ldr r2, [r7, #20] + 80028fa: 430a orrs r2, r1 + 80028fc: 601a str r2, [r3, #0] + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + 80028fe: 687b ldr r3, [r7, #4] + 8002900: 681b ldr r3, [r3, #0] + 8002902: 685b ldr r3, [r3, #4] + 8002904: 4a7c ldr r2, [pc, #496] ; (8002af8 ) + 8002906: 4013 ands r3, r2 + 8002908: 0019 movs r1, r3 + 800290a: 687b ldr r3, [r7, #4] + 800290c: 68da ldr r2, [r3, #12] + 800290e: 687b ldr r3, [r7, #4] + 8002910: 681b ldr r3, [r3, #0] + 8002912: 430a orrs r2, r1 + 8002914: 605a str r2, [r3, #4] + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + 8002916: 687b ldr r3, [r7, #4] + 8002918: 699b ldr r3, [r3, #24] + 800291a: 617b str r3, [r7, #20] + + tmpreg |= huart->Init.OneBitSampling; + 800291c: 687b ldr r3, [r7, #4] + 800291e: 6a1b ldr r3, [r3, #32] + 8002920: 697a ldr r2, [r7, #20] + 8002922: 4313 orrs r3, r2 + 8002924: 617b str r3, [r7, #20] + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + 8002926: 687b ldr r3, [r7, #4] + 8002928: 681b ldr r3, [r3, #0] + 800292a: 689b ldr r3, [r3, #8] + 800292c: 4a73 ldr r2, [pc, #460] ; (8002afc ) + 800292e: 4013 ands r3, r2 + 8002930: 0019 movs r1, r3 + 8002932: 687b ldr r3, [r7, #4] + 8002934: 681b ldr r3, [r3, #0] + 8002936: 697a ldr r2, [r7, #20] + 8002938: 430a orrs r2, r1 + 800293a: 609a str r2, [r3, #8] + + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + 800293c: 4b70 ldr r3, [pc, #448] ; (8002b00 ) + 800293e: 6b1b ldr r3, [r3, #48] ; 0x30 + 8002940: 2203 movs r2, #3 + 8002942: 4013 ands r3, r2 + 8002944: 2b01 cmp r3, #1 + 8002946: d00f beq.n 8002968 + 8002948: d304 bcc.n 8002954 + 800294a: 2b02 cmp r3, #2 + 800294c: d011 beq.n 8002972 + 800294e: 2b03 cmp r3, #3 + 8002950: d005 beq.n 800295e + 8002952: e013 b.n 800297c + 8002954: 231f movs r3, #31 + 8002956: 18fb adds r3, r7, r3 + 8002958: 2200 movs r2, #0 + 800295a: 701a strb r2, [r3, #0] + 800295c: e012 b.n 8002984 + 800295e: 231f movs r3, #31 + 8002960: 18fb adds r3, r7, r3 + 8002962: 2202 movs r2, #2 + 8002964: 701a strb r2, [r3, #0] + 8002966: e00d b.n 8002984 + 8002968: 231f movs r3, #31 + 800296a: 18fb adds r3, r7, r3 + 800296c: 2204 movs r2, #4 + 800296e: 701a strb r2, [r3, #0] + 8002970: e008 b.n 8002984 + 8002972: 231f movs r3, #31 + 8002974: 18fb adds r3, r7, r3 + 8002976: 2208 movs r2, #8 + 8002978: 701a strb r2, [r3, #0] + 800297a: e003 b.n 8002984 + 800297c: 231f movs r3, #31 + 800297e: 18fb adds r3, r7, r3 + 8002980: 2210 movs r2, #16 + 8002982: 701a strb r2, [r3, #0] + 8002984: 46c0 nop ; (mov r8, r8) + + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + 8002986: 687b ldr r3, [r7, #4] + 8002988: 69da ldr r2, [r3, #28] + 800298a: 2380 movs r3, #128 ; 0x80 + 800298c: 021b lsls r3, r3, #8 + 800298e: 429a cmp r2, r3 + 8002990: d15c bne.n 8002a4c + { + switch (clocksource) + 8002992: 231f movs r3, #31 + 8002994: 18fb adds r3, r7, r3 + 8002996: 781b ldrb r3, [r3, #0] + 8002998: 2b02 cmp r3, #2 + 800299a: d00d beq.n 80029b8 + 800299c: dc02 bgt.n 80029a4 + 800299e: 2b00 cmp r3, #0 + 80029a0: d005 beq.n 80029ae + 80029a2: e015 b.n 80029d0 + 80029a4: 2b04 cmp r3, #4 + 80029a6: d00a beq.n 80029be + 80029a8: 2b08 cmp r3, #8 + 80029aa: d00d beq.n 80029c8 + 80029ac: e010 b.n 80029d0 + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + 80029ae: f7ff fda5 bl 80024fc + 80029b2: 0003 movs r3, r0 + 80029b4: 61bb str r3, [r7, #24] + break; + 80029b6: e012 b.n 80029de + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + 80029b8: 4b52 ldr r3, [pc, #328] ; (8002b04 ) + 80029ba: 61bb str r3, [r7, #24] + break; + 80029bc: e00f b.n 80029de + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + 80029be: f7ff fd2f bl 8002420 + 80029c2: 0003 movs r3, r0 + 80029c4: 61bb str r3, [r7, #24] + break; + 80029c6: e00a b.n 80029de + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + 80029c8: 2380 movs r3, #128 ; 0x80 + 80029ca: 021b lsls r3, r3, #8 + 80029cc: 61bb str r3, [r7, #24] + break; + 80029ce: e006 b.n 80029de + default: + pclk = 0U; + 80029d0: 2300 movs r3, #0 + 80029d2: 61bb str r3, [r7, #24] + ret = HAL_ERROR; + 80029d4: 231e movs r3, #30 + 80029d6: 18fb adds r3, r7, r3 + 80029d8: 2201 movs r2, #1 + 80029da: 701a strb r2, [r3, #0] + break; + 80029dc: 46c0 nop ; (mov r8, r8) + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + 80029de: 69bb ldr r3, [r7, #24] + 80029e0: 2b00 cmp r3, #0 + 80029e2: d100 bne.n 80029e6 + 80029e4: e079 b.n 8002ada + { + usartdiv = (uint16_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); + 80029e6: 69bb ldr r3, [r7, #24] + 80029e8: 005a lsls r2, r3, #1 + 80029ea: 687b ldr r3, [r7, #4] + 80029ec: 685b ldr r3, [r3, #4] + 80029ee: 085b lsrs r3, r3, #1 + 80029f0: 18d2 adds r2, r2, r3 + 80029f2: 687b ldr r3, [r7, #4] + 80029f4: 685b ldr r3, [r3, #4] + 80029f6: 0019 movs r1, r3 + 80029f8: 0010 movs r0, r2 + 80029fa: f7fd fb8d bl 8000118 <__udivsi3> + 80029fe: 0003 movs r3, r0 + 8002a00: b29b uxth r3, r3 + 8002a02: 613b str r3, [r7, #16] + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + 8002a04: 693b ldr r3, [r7, #16] + 8002a06: 2b0f cmp r3, #15 + 8002a08: d91b bls.n 8002a42 + 8002a0a: 693b ldr r3, [r7, #16] + 8002a0c: 4a3e ldr r2, [pc, #248] ; (8002b08 ) + 8002a0e: 4293 cmp r3, r2 + 8002a10: d817 bhi.n 8002a42 + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + 8002a12: 693b ldr r3, [r7, #16] + 8002a14: b29a uxth r2, r3 + 8002a16: 200e movs r0, #14 + 8002a18: 183b adds r3, r7, r0 + 8002a1a: 210f movs r1, #15 + 8002a1c: 438a bics r2, r1 + 8002a1e: 801a strh r2, [r3, #0] + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + 8002a20: 693b ldr r3, [r7, #16] + 8002a22: 085b lsrs r3, r3, #1 + 8002a24: b29b uxth r3, r3 + 8002a26: 2207 movs r2, #7 + 8002a28: 4013 ands r3, r2 + 8002a2a: b299 uxth r1, r3 + 8002a2c: 183b adds r3, r7, r0 + 8002a2e: 183a adds r2, r7, r0 + 8002a30: 8812 ldrh r2, [r2, #0] + 8002a32: 430a orrs r2, r1 + 8002a34: 801a strh r2, [r3, #0] + huart->Instance->BRR = brrtemp; + 8002a36: 687b ldr r3, [r7, #4] + 8002a38: 681b ldr r3, [r3, #0] + 8002a3a: 183a adds r2, r7, r0 + 8002a3c: 8812 ldrh r2, [r2, #0] + 8002a3e: 60da str r2, [r3, #12] + 8002a40: e04b b.n 8002ada + } + else + { + ret = HAL_ERROR; + 8002a42: 231e movs r3, #30 + 8002a44: 18fb adds r3, r7, r3 + 8002a46: 2201 movs r2, #1 + 8002a48: 701a strb r2, [r3, #0] + 8002a4a: e046 b.n 8002ada + } + } + } + else + { + switch (clocksource) + 8002a4c: 231f movs r3, #31 + 8002a4e: 18fb adds r3, r7, r3 + 8002a50: 781b ldrb r3, [r3, #0] + 8002a52: 2b02 cmp r3, #2 + 8002a54: d00d beq.n 8002a72 + 8002a56: dc02 bgt.n 8002a5e + 8002a58: 2b00 cmp r3, #0 + 8002a5a: d005 beq.n 8002a68 + 8002a5c: e015 b.n 8002a8a + 8002a5e: 2b04 cmp r3, #4 + 8002a60: d00a beq.n 8002a78 + 8002a62: 2b08 cmp r3, #8 + 8002a64: d00d beq.n 8002a82 + 8002a66: e010 b.n 8002a8a + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + 8002a68: f7ff fd48 bl 80024fc + 8002a6c: 0003 movs r3, r0 + 8002a6e: 61bb str r3, [r7, #24] + break; + 8002a70: e012 b.n 8002a98 + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + 8002a72: 4b24 ldr r3, [pc, #144] ; (8002b04 ) + 8002a74: 61bb str r3, [r7, #24] + break; + 8002a76: e00f b.n 8002a98 + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + 8002a78: f7ff fcd2 bl 8002420 + 8002a7c: 0003 movs r3, r0 + 8002a7e: 61bb str r3, [r7, #24] + break; + 8002a80: e00a b.n 8002a98 + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + 8002a82: 2380 movs r3, #128 ; 0x80 + 8002a84: 021b lsls r3, r3, #8 + 8002a86: 61bb str r3, [r7, #24] + break; + 8002a88: e006 b.n 8002a98 + default: + pclk = 0U; + 8002a8a: 2300 movs r3, #0 + 8002a8c: 61bb str r3, [r7, #24] + ret = HAL_ERROR; + 8002a8e: 231e movs r3, #30 + 8002a90: 18fb adds r3, r7, r3 + 8002a92: 2201 movs r2, #1 + 8002a94: 701a strb r2, [r3, #0] + break; + 8002a96: 46c0 nop ; (mov r8, r8) + } + + if (pclk != 0U) + 8002a98: 69bb ldr r3, [r7, #24] + 8002a9a: 2b00 cmp r3, #0 + 8002a9c: d01d beq.n 8002ada + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint16_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); + 8002a9e: 687b ldr r3, [r7, #4] + 8002aa0: 685b ldr r3, [r3, #4] + 8002aa2: 085a lsrs r2, r3, #1 + 8002aa4: 69bb ldr r3, [r7, #24] + 8002aa6: 18d2 adds r2, r2, r3 + 8002aa8: 687b ldr r3, [r7, #4] + 8002aaa: 685b ldr r3, [r3, #4] + 8002aac: 0019 movs r1, r3 + 8002aae: 0010 movs r0, r2 + 8002ab0: f7fd fb32 bl 8000118 <__udivsi3> + 8002ab4: 0003 movs r3, r0 + 8002ab6: b29b uxth r3, r3 + 8002ab8: 613b str r3, [r7, #16] + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + 8002aba: 693b ldr r3, [r7, #16] + 8002abc: 2b0f cmp r3, #15 + 8002abe: d908 bls.n 8002ad2 + 8002ac0: 693b ldr r3, [r7, #16] + 8002ac2: 4a11 ldr r2, [pc, #68] ; (8002b08 ) + 8002ac4: 4293 cmp r3, r2 + 8002ac6: d804 bhi.n 8002ad2 + { + huart->Instance->BRR = usartdiv; + 8002ac8: 687b ldr r3, [r7, #4] + 8002aca: 681b ldr r3, [r3, #0] + 8002acc: 693a ldr r2, [r7, #16] + 8002ace: 60da str r2, [r3, #12] + 8002ad0: e003 b.n 8002ada + } + else + { + ret = HAL_ERROR; + 8002ad2: 231e movs r3, #30 + 8002ad4: 18fb adds r3, r7, r3 + 8002ad6: 2201 movs r2, #1 + 8002ad8: 701a strb r2, [r3, #0] + } + } + + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + 8002ada: 687b ldr r3, [r7, #4] + 8002adc: 2200 movs r2, #0 + 8002ade: 665a str r2, [r3, #100] ; 0x64 + huart->TxISR = NULL; + 8002ae0: 687b ldr r3, [r7, #4] + 8002ae2: 2200 movs r2, #0 + 8002ae4: 669a str r2, [r3, #104] ; 0x68 + + return ret; + 8002ae6: 231e movs r3, #30 + 8002ae8: 18fb adds r3, r7, r3 + 8002aea: 781b ldrb r3, [r3, #0] +} + 8002aec: 0018 movs r0, r3 + 8002aee: 46bd mov sp, r7 + 8002af0: b008 add sp, #32 + 8002af2: bd80 pop {r7, pc} + 8002af4: ffff69f3 .word 0xffff69f3 + 8002af8: ffffcfff .word 0xffffcfff + 8002afc: fffff4ff .word 0xfffff4ff + 8002b00: 40021000 .word 0x40021000 + 8002b04: 007a1200 .word 0x007a1200 + 8002b08: 0000ffff .word 0x0000ffff + +08002b0c : + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + 8002b0c: b580 push {r7, lr} + 8002b0e: b082 sub sp, #8 + 8002b10: af00 add r7, sp, #0 + 8002b12: 6078 str r0, [r7, #4] + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + 8002b14: 687b ldr r3, [r7, #4] + 8002b16: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002b18: 2201 movs r2, #1 + 8002b1a: 4013 ands r3, r2 + 8002b1c: d00b beq.n 8002b36 + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + 8002b1e: 687b ldr r3, [r7, #4] + 8002b20: 681b ldr r3, [r3, #0] + 8002b22: 685b ldr r3, [r3, #4] + 8002b24: 4a4a ldr r2, [pc, #296] ; (8002c50 ) + 8002b26: 4013 ands r3, r2 + 8002b28: 0019 movs r1, r3 + 8002b2a: 687b ldr r3, [r7, #4] + 8002b2c: 6a9a ldr r2, [r3, #40] ; 0x28 + 8002b2e: 687b ldr r3, [r7, #4] + 8002b30: 681b ldr r3, [r3, #0] + 8002b32: 430a orrs r2, r1 + 8002b34: 605a str r2, [r3, #4] + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + 8002b36: 687b ldr r3, [r7, #4] + 8002b38: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002b3a: 2202 movs r2, #2 + 8002b3c: 4013 ands r3, r2 + 8002b3e: d00b beq.n 8002b58 + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + 8002b40: 687b ldr r3, [r7, #4] + 8002b42: 681b ldr r3, [r3, #0] + 8002b44: 685b ldr r3, [r3, #4] + 8002b46: 4a43 ldr r2, [pc, #268] ; (8002c54 ) + 8002b48: 4013 ands r3, r2 + 8002b4a: 0019 movs r1, r3 + 8002b4c: 687b ldr r3, [r7, #4] + 8002b4e: 6ada ldr r2, [r3, #44] ; 0x2c + 8002b50: 687b ldr r3, [r7, #4] + 8002b52: 681b ldr r3, [r3, #0] + 8002b54: 430a orrs r2, r1 + 8002b56: 605a str r2, [r3, #4] + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + 8002b58: 687b ldr r3, [r7, #4] + 8002b5a: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002b5c: 2204 movs r2, #4 + 8002b5e: 4013 ands r3, r2 + 8002b60: d00b beq.n 8002b7a + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + 8002b62: 687b ldr r3, [r7, #4] + 8002b64: 681b ldr r3, [r3, #0] + 8002b66: 685b ldr r3, [r3, #4] + 8002b68: 4a3b ldr r2, [pc, #236] ; (8002c58 ) + 8002b6a: 4013 ands r3, r2 + 8002b6c: 0019 movs r1, r3 + 8002b6e: 687b ldr r3, [r7, #4] + 8002b70: 6b1a ldr r2, [r3, #48] ; 0x30 + 8002b72: 687b ldr r3, [r7, #4] + 8002b74: 681b ldr r3, [r3, #0] + 8002b76: 430a orrs r2, r1 + 8002b78: 605a str r2, [r3, #4] + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + 8002b7a: 687b ldr r3, [r7, #4] + 8002b7c: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002b7e: 2208 movs r2, #8 + 8002b80: 4013 ands r3, r2 + 8002b82: d00b beq.n 8002b9c + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + 8002b84: 687b ldr r3, [r7, #4] + 8002b86: 681b ldr r3, [r3, #0] + 8002b88: 685b ldr r3, [r3, #4] + 8002b8a: 4a34 ldr r2, [pc, #208] ; (8002c5c ) + 8002b8c: 4013 ands r3, r2 + 8002b8e: 0019 movs r1, r3 + 8002b90: 687b ldr r3, [r7, #4] + 8002b92: 6b5a ldr r2, [r3, #52] ; 0x34 + 8002b94: 687b ldr r3, [r7, #4] + 8002b96: 681b ldr r3, [r3, #0] + 8002b98: 430a orrs r2, r1 + 8002b9a: 605a str r2, [r3, #4] + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + 8002b9c: 687b ldr r3, [r7, #4] + 8002b9e: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002ba0: 2210 movs r2, #16 + 8002ba2: 4013 ands r3, r2 + 8002ba4: d00b beq.n 8002bbe + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + 8002ba6: 687b ldr r3, [r7, #4] + 8002ba8: 681b ldr r3, [r3, #0] + 8002baa: 689b ldr r3, [r3, #8] + 8002bac: 4a2c ldr r2, [pc, #176] ; (8002c60 ) + 8002bae: 4013 ands r3, r2 + 8002bb0: 0019 movs r1, r3 + 8002bb2: 687b ldr r3, [r7, #4] + 8002bb4: 6b9a ldr r2, [r3, #56] ; 0x38 + 8002bb6: 687b ldr r3, [r7, #4] + 8002bb8: 681b ldr r3, [r3, #0] + 8002bba: 430a orrs r2, r1 + 8002bbc: 609a str r2, [r3, #8] + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + 8002bbe: 687b ldr r3, [r7, #4] + 8002bc0: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002bc2: 2220 movs r2, #32 + 8002bc4: 4013 ands r3, r2 + 8002bc6: d00b beq.n 8002be0 + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + 8002bc8: 687b ldr r3, [r7, #4] + 8002bca: 681b ldr r3, [r3, #0] + 8002bcc: 689b ldr r3, [r3, #8] + 8002bce: 4a25 ldr r2, [pc, #148] ; (8002c64 ) + 8002bd0: 4013 ands r3, r2 + 8002bd2: 0019 movs r1, r3 + 8002bd4: 687b ldr r3, [r7, #4] + 8002bd6: 6bda ldr r2, [r3, #60] ; 0x3c + 8002bd8: 687b ldr r3, [r7, #4] + 8002bda: 681b ldr r3, [r3, #0] + 8002bdc: 430a orrs r2, r1 + 8002bde: 609a str r2, [r3, #8] + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + 8002be0: 687b ldr r3, [r7, #4] + 8002be2: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002be4: 2240 movs r2, #64 ; 0x40 + 8002be6: 4013 ands r3, r2 + 8002be8: d01d beq.n 8002c26 + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + 8002bea: 687b ldr r3, [r7, #4] + 8002bec: 681b ldr r3, [r3, #0] + 8002bee: 685b ldr r3, [r3, #4] + 8002bf0: 4a1d ldr r2, [pc, #116] ; (8002c68 ) + 8002bf2: 4013 ands r3, r2 + 8002bf4: 0019 movs r1, r3 + 8002bf6: 687b ldr r3, [r7, #4] + 8002bf8: 6c1a ldr r2, [r3, #64] ; 0x40 + 8002bfa: 687b ldr r3, [r7, #4] + 8002bfc: 681b ldr r3, [r3, #0] + 8002bfe: 430a orrs r2, r1 + 8002c00: 605a str r2, [r3, #4] + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + 8002c02: 687b ldr r3, [r7, #4] + 8002c04: 6c1a ldr r2, [r3, #64] ; 0x40 + 8002c06: 2380 movs r3, #128 ; 0x80 + 8002c08: 035b lsls r3, r3, #13 + 8002c0a: 429a cmp r2, r3 + 8002c0c: d10b bne.n 8002c26 + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + 8002c0e: 687b ldr r3, [r7, #4] + 8002c10: 681b ldr r3, [r3, #0] + 8002c12: 685b ldr r3, [r3, #4] + 8002c14: 4a15 ldr r2, [pc, #84] ; (8002c6c ) + 8002c16: 4013 ands r3, r2 + 8002c18: 0019 movs r1, r3 + 8002c1a: 687b ldr r3, [r7, #4] + 8002c1c: 6c5a ldr r2, [r3, #68] ; 0x44 + 8002c1e: 687b ldr r3, [r7, #4] + 8002c20: 681b ldr r3, [r3, #0] + 8002c22: 430a orrs r2, r1 + 8002c24: 605a str r2, [r3, #4] + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + 8002c26: 687b ldr r3, [r7, #4] + 8002c28: 6a5b ldr r3, [r3, #36] ; 0x24 + 8002c2a: 2280 movs r2, #128 ; 0x80 + 8002c2c: 4013 ands r3, r2 + 8002c2e: d00b beq.n 8002c48 + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + 8002c30: 687b ldr r3, [r7, #4] + 8002c32: 681b ldr r3, [r3, #0] + 8002c34: 685b ldr r3, [r3, #4] + 8002c36: 4a0e ldr r2, [pc, #56] ; (8002c70 ) + 8002c38: 4013 ands r3, r2 + 8002c3a: 0019 movs r1, r3 + 8002c3c: 687b ldr r3, [r7, #4] + 8002c3e: 6c9a ldr r2, [r3, #72] ; 0x48 + 8002c40: 687b ldr r3, [r7, #4] + 8002c42: 681b ldr r3, [r3, #0] + 8002c44: 430a orrs r2, r1 + 8002c46: 605a str r2, [r3, #4] + } +} + 8002c48: 46c0 nop ; (mov r8, r8) + 8002c4a: 46bd mov sp, r7 + 8002c4c: b002 add sp, #8 + 8002c4e: bd80 pop {r7, pc} + 8002c50: fffdffff .word 0xfffdffff + 8002c54: fffeffff .word 0xfffeffff + 8002c58: fffbffff .word 0xfffbffff + 8002c5c: ffff7fff .word 0xffff7fff + 8002c60: ffffefff .word 0xffffefff + 8002c64: ffffdfff .word 0xffffdfff + 8002c68: ffefffff .word 0xffefffff + 8002c6c: ff9fffff .word 0xff9fffff + 8002c70: fff7ffff .word 0xfff7ffff + +08002c74 : + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + 8002c74: b580 push {r7, lr} + 8002c76: b086 sub sp, #24 + 8002c78: af02 add r7, sp, #8 + 8002c7a: 6078 str r0, [r7, #4] + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + 8002c7c: 687b ldr r3, [r7, #4] + 8002c7e: 2280 movs r2, #128 ; 0x80 + 8002c80: 2100 movs r1, #0 + 8002c82: 5099 str r1, [r3, r2] + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + 8002c84: f7fe fd12 bl 80016ac + 8002c88: 0003 movs r3, r0 + 8002c8a: 60fb str r3, [r7, #12] + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + 8002c8c: 687b ldr r3, [r7, #4] + 8002c8e: 681b ldr r3, [r3, #0] + 8002c90: 681b ldr r3, [r3, #0] + 8002c92: 2208 movs r2, #8 + 8002c94: 4013 ands r3, r2 + 8002c96: 2b08 cmp r3, #8 + 8002c98: d10d bne.n 8002cb6 + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + 8002c9a: 68fa ldr r2, [r7, #12] + 8002c9c: 2380 movs r3, #128 ; 0x80 + 8002c9e: 0399 lsls r1, r3, #14 + 8002ca0: 6878 ldr r0, [r7, #4] + 8002ca2: 4b18 ldr r3, [pc, #96] ; (8002d04 ) + 8002ca4: 9300 str r3, [sp, #0] + 8002ca6: 0013 movs r3, r2 + 8002ca8: 2200 movs r2, #0 + 8002caa: f000 f82d bl 8002d08 + 8002cae: 1e03 subs r3, r0, #0 + 8002cb0: d001 beq.n 8002cb6 + { + /* Timeout occurred */ + return HAL_TIMEOUT; + 8002cb2: 2303 movs r3, #3 + 8002cb4: e022 b.n 8002cfc + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + 8002cb6: 687b ldr r3, [r7, #4] + 8002cb8: 681b ldr r3, [r3, #0] + 8002cba: 681b ldr r3, [r3, #0] + 8002cbc: 2204 movs r2, #4 + 8002cbe: 4013 ands r3, r2 + 8002cc0: 2b04 cmp r3, #4 + 8002cc2: d10d bne.n 8002ce0 + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + 8002cc4: 68fa ldr r2, [r7, #12] + 8002cc6: 2380 movs r3, #128 ; 0x80 + 8002cc8: 03d9 lsls r1, r3, #15 + 8002cca: 6878 ldr r0, [r7, #4] + 8002ccc: 4b0d ldr r3, [pc, #52] ; (8002d04 ) + 8002cce: 9300 str r3, [sp, #0] + 8002cd0: 0013 movs r3, r2 + 8002cd2: 2200 movs r2, #0 + 8002cd4: f000 f818 bl 8002d08 + 8002cd8: 1e03 subs r3, r0, #0 + 8002cda: d001 beq.n 8002ce0 + { + /* Timeout occurred */ + return HAL_TIMEOUT; + 8002cdc: 2303 movs r3, #3 + 8002cde: e00d b.n 8002cfc + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + 8002ce0: 687b ldr r3, [r7, #4] + 8002ce2: 2220 movs r2, #32 + 8002ce4: 679a str r2, [r3, #120] ; 0x78 + huart->RxState = HAL_UART_STATE_READY; + 8002ce6: 687b ldr r3, [r7, #4] + 8002ce8: 2220 movs r2, #32 + 8002cea: 67da str r2, [r3, #124] ; 0x7c + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + 8002cec: 687b ldr r3, [r7, #4] + 8002cee: 2200 movs r2, #0 + 8002cf0: 661a str r2, [r3, #96] ; 0x60 + + __HAL_UNLOCK(huart); + 8002cf2: 687b ldr r3, [r7, #4] + 8002cf4: 2274 movs r2, #116 ; 0x74 + 8002cf6: 2100 movs r1, #0 + 8002cf8: 5499 strb r1, [r3, r2] + + return HAL_OK; + 8002cfa: 2300 movs r3, #0 +} + 8002cfc: 0018 movs r0, r3 + 8002cfe: 46bd mov sp, r7 + 8002d00: b004 add sp, #16 + 8002d02: bd80 pop {r7, pc} + 8002d04: 01ffffff .word 0x01ffffff + +08002d08 : + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + 8002d08: b580 push {r7, lr} + 8002d0a: b084 sub sp, #16 + 8002d0c: af00 add r7, sp, #0 + 8002d0e: 60f8 str r0, [r7, #12] + 8002d10: 60b9 str r1, [r7, #8] + 8002d12: 603b str r3, [r7, #0] + 8002d14: 1dfb adds r3, r7, #7 + 8002d16: 701a strb r2, [r3, #0] + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + 8002d18: e05e b.n 8002dd8 + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + 8002d1a: 69bb ldr r3, [r7, #24] + 8002d1c: 3301 adds r3, #1 + 8002d1e: d05b beq.n 8002dd8 + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + 8002d20: f7fe fcc4 bl 80016ac + 8002d24: 0002 movs r2, r0 + 8002d26: 683b ldr r3, [r7, #0] + 8002d28: 1ad3 subs r3, r2, r3 + 8002d2a: 69ba ldr r2, [r7, #24] + 8002d2c: 429a cmp r2, r3 + 8002d2e: d302 bcc.n 8002d36 + 8002d30: 69bb ldr r3, [r7, #24] + 8002d32: 2b00 cmp r3, #0 + 8002d34: d11b bne.n 8002d6e + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); + 8002d36: 68fb ldr r3, [r7, #12] + 8002d38: 681b ldr r3, [r3, #0] + 8002d3a: 681a ldr r2, [r3, #0] + 8002d3c: 68fb ldr r3, [r7, #12] + 8002d3e: 681b ldr r3, [r3, #0] + 8002d40: 492f ldr r1, [pc, #188] ; (8002e00 ) + 8002d42: 400a ands r2, r1 + 8002d44: 601a str r2, [r3, #0] + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + 8002d46: 68fb ldr r3, [r7, #12] + 8002d48: 681b ldr r3, [r3, #0] + 8002d4a: 689a ldr r2, [r3, #8] + 8002d4c: 68fb ldr r3, [r7, #12] + 8002d4e: 681b ldr r3, [r3, #0] + 8002d50: 2101 movs r1, #1 + 8002d52: 438a bics r2, r1 + 8002d54: 609a str r2, [r3, #8] + + huart->gState = HAL_UART_STATE_READY; + 8002d56: 68fb ldr r3, [r7, #12] + 8002d58: 2220 movs r2, #32 + 8002d5a: 679a str r2, [r3, #120] ; 0x78 + huart->RxState = HAL_UART_STATE_READY; + 8002d5c: 68fb ldr r3, [r7, #12] + 8002d5e: 2220 movs r2, #32 + 8002d60: 67da str r2, [r3, #124] ; 0x7c + + __HAL_UNLOCK(huart); + 8002d62: 68fb ldr r3, [r7, #12] + 8002d64: 2274 movs r2, #116 ; 0x74 + 8002d66: 2100 movs r1, #0 + 8002d68: 5499 strb r1, [r3, r2] + + return HAL_TIMEOUT; + 8002d6a: 2303 movs r3, #3 + 8002d6c: e044 b.n 8002df8 + } + + if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) + 8002d6e: 68fb ldr r3, [r7, #12] + 8002d70: 681b ldr r3, [r3, #0] + 8002d72: 681b ldr r3, [r3, #0] + 8002d74: 2204 movs r2, #4 + 8002d76: 4013 ands r3, r2 + 8002d78: d02e beq.n 8002dd8 + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + 8002d7a: 68fb ldr r3, [r7, #12] + 8002d7c: 681b ldr r3, [r3, #0] + 8002d7e: 69da ldr r2, [r3, #28] + 8002d80: 2380 movs r3, #128 ; 0x80 + 8002d82: 011b lsls r3, r3, #4 + 8002d84: 401a ands r2, r3 + 8002d86: 2380 movs r3, #128 ; 0x80 + 8002d88: 011b lsls r3, r3, #4 + 8002d8a: 429a cmp r2, r3 + 8002d8c: d124 bne.n 8002dd8 + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + 8002d8e: 68fb ldr r3, [r7, #12] + 8002d90: 681b ldr r3, [r3, #0] + 8002d92: 2280 movs r2, #128 ; 0x80 + 8002d94: 0112 lsls r2, r2, #4 + 8002d96: 621a str r2, [r3, #32] + + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); + 8002d98: 68fb ldr r3, [r7, #12] + 8002d9a: 681b ldr r3, [r3, #0] + 8002d9c: 681a ldr r2, [r3, #0] + 8002d9e: 68fb ldr r3, [r7, #12] + 8002da0: 681b ldr r3, [r3, #0] + 8002da2: 4917 ldr r1, [pc, #92] ; (8002e00 ) + 8002da4: 400a ands r2, r1 + 8002da6: 601a str r2, [r3, #0] + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + 8002da8: 68fb ldr r3, [r7, #12] + 8002daa: 681b ldr r3, [r3, #0] + 8002dac: 689a ldr r2, [r3, #8] + 8002dae: 68fb ldr r3, [r7, #12] + 8002db0: 681b ldr r3, [r3, #0] + 8002db2: 2101 movs r1, #1 + 8002db4: 438a bics r2, r1 + 8002db6: 609a str r2, [r3, #8] + + huart->gState = HAL_UART_STATE_READY; + 8002db8: 68fb ldr r3, [r7, #12] + 8002dba: 2220 movs r2, #32 + 8002dbc: 679a str r2, [r3, #120] ; 0x78 + huart->RxState = HAL_UART_STATE_READY; + 8002dbe: 68fb ldr r3, [r7, #12] + 8002dc0: 2220 movs r2, #32 + 8002dc2: 67da str r2, [r3, #124] ; 0x7c + huart->ErrorCode = HAL_UART_ERROR_RTO; + 8002dc4: 68fb ldr r3, [r7, #12] + 8002dc6: 2280 movs r2, #128 ; 0x80 + 8002dc8: 2120 movs r1, #32 + 8002dca: 5099 str r1, [r3, r2] + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + 8002dcc: 68fb ldr r3, [r7, #12] + 8002dce: 2274 movs r2, #116 ; 0x74 + 8002dd0: 2100 movs r1, #0 + 8002dd2: 5499 strb r1, [r3, r2] + + return HAL_TIMEOUT; + 8002dd4: 2303 movs r3, #3 + 8002dd6: e00f b.n 8002df8 + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + 8002dd8: 68fb ldr r3, [r7, #12] + 8002dda: 681b ldr r3, [r3, #0] + 8002ddc: 69db ldr r3, [r3, #28] + 8002dde: 68ba ldr r2, [r7, #8] + 8002de0: 4013 ands r3, r2 + 8002de2: 68ba ldr r2, [r7, #8] + 8002de4: 1ad3 subs r3, r2, r3 + 8002de6: 425a negs r2, r3 + 8002de8: 4153 adcs r3, r2 + 8002dea: b2db uxtb r3, r3 + 8002dec: 001a movs r2, r3 + 8002dee: 1dfb adds r3, r7, #7 + 8002df0: 781b ldrb r3, [r3, #0] + 8002df2: 429a cmp r2, r3 + 8002df4: d091 beq.n 8002d1a + } + } + } + } + return HAL_OK; + 8002df6: 2300 movs r3, #0 +} + 8002df8: 0018 movs r0, r3 + 8002dfa: 46bd mov sp, r7 + 8002dfc: b004 add sp, #16 + 8002dfe: bd80 pop {r7, pc} + 8002e00: fffffe5f .word 0xfffffe5f + +08002e04 <__errno>: + 8002e04: 4b01 ldr r3, [pc, #4] ; (8002e0c <__errno+0x8>) + 8002e06: 6818 ldr r0, [r3, #0] + 8002e08: 4770 bx lr + 8002e0a: 46c0 nop ; (mov r8, r8) + 8002e0c: 20000010 .word 0x20000010 + +08002e10 <__libc_init_array>: + 8002e10: b570 push {r4, r5, r6, lr} + 8002e12: 2600 movs r6, #0 + 8002e14: 4d0c ldr r5, [pc, #48] ; (8002e48 <__libc_init_array+0x38>) + 8002e16: 4c0d ldr r4, [pc, #52] ; (8002e4c <__libc_init_array+0x3c>) + 8002e18: 1b64 subs r4, r4, r5 + 8002e1a: 10a4 asrs r4, r4, #2 + 8002e1c: 42a6 cmp r6, r4 + 8002e1e: d109 bne.n 8002e34 <__libc_init_array+0x24> + 8002e20: 2600 movs r6, #0 + 8002e22: f000 f905 bl 8003030 <_init> + 8002e26: 4d0a ldr r5, [pc, #40] ; (8002e50 <__libc_init_array+0x40>) + 8002e28: 4c0a ldr r4, [pc, #40] ; (8002e54 <__libc_init_array+0x44>) + 8002e2a: 1b64 subs r4, r4, r5 + 8002e2c: 10a4 asrs r4, r4, #2 + 8002e2e: 42a6 cmp r6, r4 + 8002e30: d105 bne.n 8002e3e <__libc_init_array+0x2e> + 8002e32: bd70 pop {r4, r5, r6, pc} + 8002e34: 00b3 lsls r3, r6, #2 + 8002e36: 58eb ldr r3, [r5, r3] + 8002e38: 4798 blx r3 + 8002e3a: 3601 adds r6, #1 + 8002e3c: e7ee b.n 8002e1c <__libc_init_array+0xc> + 8002e3e: 00b3 lsls r3, r6, #2 + 8002e40: 58eb ldr r3, [r5, r3] + 8002e42: 4798 blx r3 + 8002e44: 3601 adds r6, #1 + 8002e46: e7f2 b.n 8002e2e <__libc_init_array+0x1e> + 8002e48: 080030ec .word 0x080030ec + 8002e4c: 080030ec .word 0x080030ec + 8002e50: 080030ec .word 0x080030ec + 8002e54: 080030f0 .word 0x080030f0 + +08002e58 : + 8002e58: 2300 movs r3, #0 + 8002e5a: b510 push {r4, lr} + 8002e5c: 429a cmp r2, r3 + 8002e5e: d100 bne.n 8002e62 + 8002e60: bd10 pop {r4, pc} + 8002e62: 5ccc ldrb r4, [r1, r3] + 8002e64: 54c4 strb r4, [r0, r3] + 8002e66: 3301 adds r3, #1 + 8002e68: e7f8 b.n 8002e5c + +08002e6a : + 8002e6a: 0003 movs r3, r0 + 8002e6c: 1812 adds r2, r2, r0 + 8002e6e: 4293 cmp r3, r2 + 8002e70: d100 bne.n 8002e74 + 8002e72: 4770 bx lr + 8002e74: 7019 strb r1, [r3, #0] + 8002e76: 3301 adds r3, #1 + 8002e78: e7f9 b.n 8002e6e + ... + +08002e7c : + 8002e7c: 4b0d ldr r3, [pc, #52] ; (8002eb4 ) + 8002e7e: b570 push {r4, r5, r6, lr} + 8002e80: 681c ldr r4, [r3, #0] + 8002e82: 0005 movs r5, r0 + 8002e84: 6ba3 ldr r3, [r4, #56] ; 0x38 + 8002e86: 2b00 cmp r3, #0 + 8002e88: d10f bne.n 8002eaa + 8002e8a: 2018 movs r0, #24 + 8002e8c: f000 f854 bl 8002f38 + 8002e90: 4b09 ldr r3, [pc, #36] ; (8002eb8 ) + 8002e92: 63a0 str r0, [r4, #56] ; 0x38 + 8002e94: 6003 str r3, [r0, #0] + 8002e96: 4b09 ldr r3, [pc, #36] ; (8002ebc ) + 8002e98: 2201 movs r2, #1 + 8002e9a: 6043 str r3, [r0, #4] + 8002e9c: 4b08 ldr r3, [pc, #32] ; (8002ec0 ) + 8002e9e: 6083 str r3, [r0, #8] + 8002ea0: 230b movs r3, #11 + 8002ea2: 8183 strh r3, [r0, #12] + 8002ea4: 2300 movs r3, #0 + 8002ea6: 6102 str r2, [r0, #16] + 8002ea8: 6143 str r3, [r0, #20] + 8002eaa: 2200 movs r2, #0 + 8002eac: 6ba3 ldr r3, [r4, #56] ; 0x38 + 8002eae: 611d str r5, [r3, #16] + 8002eb0: 615a str r2, [r3, #20] + 8002eb2: bd70 pop {r4, r5, r6, pc} + 8002eb4: 20000010 .word 0x20000010 + 8002eb8: abcd330e .word 0xabcd330e + 8002ebc: e66d1234 .word 0xe66d1234 + 8002ec0: 0005deec .word 0x0005deec + +08002ec4 : + 8002ec4: 4b12 ldr r3, [pc, #72] ; (8002f10 ) + 8002ec6: b510 push {r4, lr} + 8002ec8: 681c ldr r4, [r3, #0] + 8002eca: 6ba3 ldr r3, [r4, #56] ; 0x38 + 8002ecc: 2b00 cmp r3, #0 + 8002ece: d10f bne.n 8002ef0 + 8002ed0: 2018 movs r0, #24 + 8002ed2: f000 f831 bl 8002f38 + 8002ed6: 4b0f ldr r3, [pc, #60] ; (8002f14 ) + 8002ed8: 63a0 str r0, [r4, #56] ; 0x38 + 8002eda: 6003 str r3, [r0, #0] + 8002edc: 4b0e ldr r3, [pc, #56] ; (8002f18 ) + 8002ede: 2201 movs r2, #1 + 8002ee0: 6043 str r3, [r0, #4] + 8002ee2: 4b0e ldr r3, [pc, #56] ; (8002f1c ) + 8002ee4: 6083 str r3, [r0, #8] + 8002ee6: 230b movs r3, #11 + 8002ee8: 8183 strh r3, [r0, #12] + 8002eea: 2300 movs r3, #0 + 8002eec: 6102 str r2, [r0, #16] + 8002eee: 6143 str r3, [r0, #20] + 8002ef0: 6ba4 ldr r4, [r4, #56] ; 0x38 + 8002ef2: 4a0b ldr r2, [pc, #44] ; (8002f20 ) + 8002ef4: 6920 ldr r0, [r4, #16] + 8002ef6: 6961 ldr r1, [r4, #20] + 8002ef8: 4b0a ldr r3, [pc, #40] ; (8002f24 ) + 8002efa: f7fd fa83 bl 8000404 <__aeabi_lmul> + 8002efe: 2201 movs r2, #1 + 8002f00: 2300 movs r3, #0 + 8002f02: 1880 adds r0, r0, r2 + 8002f04: 4159 adcs r1, r3 + 8002f06: 6120 str r0, [r4, #16] + 8002f08: 6161 str r1, [r4, #20] + 8002f0a: 0048 lsls r0, r1, #1 + 8002f0c: 0840 lsrs r0, r0, #1 + 8002f0e: bd10 pop {r4, pc} + 8002f10: 20000010 .word 0x20000010 + 8002f14: abcd330e .word 0xabcd330e + 8002f18: e66d1234 .word 0xe66d1234 + 8002f1c: 0005deec .word 0x0005deec + 8002f20: 4c957f2d .word 0x4c957f2d + 8002f24: 5851f42d .word 0x5851f42d + +08002f28 : + 8002f28: 0003 movs r3, r0 + 8002f2a: 780a ldrb r2, [r1, #0] + 8002f2c: 3101 adds r1, #1 + 8002f2e: 701a strb r2, [r3, #0] + 8002f30: 3301 adds r3, #1 + 8002f32: 2a00 cmp r2, #0 + 8002f34: d1f9 bne.n 8002f2a + 8002f36: 4770 bx lr + +08002f38 : + 8002f38: b510 push {r4, lr} + 8002f3a: 4b03 ldr r3, [pc, #12] ; (8002f48 ) + 8002f3c: 0001 movs r1, r0 + 8002f3e: 6818 ldr r0, [r3, #0] + 8002f40: f000 f804 bl 8002f4c <_malloc_r> + 8002f44: bd10 pop {r4, pc} + 8002f46: 46c0 nop ; (mov r8, r8) + 8002f48: 20000010 .word 0x20000010 + +08002f4c <_malloc_r>: + 8002f4c: 2303 movs r3, #3 + 8002f4e: b570 push {r4, r5, r6, lr} + 8002f50: 1ccd adds r5, r1, #3 + 8002f52: 439d bics r5, r3 + 8002f54: 3508 adds r5, #8 + 8002f56: 0006 movs r6, r0 + 8002f58: 2d0c cmp r5, #12 + 8002f5a: d21e bcs.n 8002f9a <_malloc_r+0x4e> + 8002f5c: 250c movs r5, #12 + 8002f5e: 42a9 cmp r1, r5 + 8002f60: d81d bhi.n 8002f9e <_malloc_r+0x52> + 8002f62: 0030 movs r0, r6 + 8002f64: f000 f862 bl 800302c <__malloc_lock> + 8002f68: 4a25 ldr r2, [pc, #148] ; (8003000 <_malloc_r+0xb4>) + 8002f6a: 6814 ldr r4, [r2, #0] + 8002f6c: 0021 movs r1, r4 + 8002f6e: 2900 cmp r1, #0 + 8002f70: d119 bne.n 8002fa6 <_malloc_r+0x5a> + 8002f72: 4c24 ldr r4, [pc, #144] ; (8003004 <_malloc_r+0xb8>) + 8002f74: 6823 ldr r3, [r4, #0] + 8002f76: 2b00 cmp r3, #0 + 8002f78: d103 bne.n 8002f82 <_malloc_r+0x36> + 8002f7a: 0030 movs r0, r6 + 8002f7c: f000 f844 bl 8003008 <_sbrk_r> + 8002f80: 6020 str r0, [r4, #0] + 8002f82: 0029 movs r1, r5 + 8002f84: 0030 movs r0, r6 + 8002f86: f000 f83f bl 8003008 <_sbrk_r> + 8002f8a: 1c43 adds r3, r0, #1 + 8002f8c: d12b bne.n 8002fe6 <_malloc_r+0x9a> + 8002f8e: 230c movs r3, #12 + 8002f90: 0030 movs r0, r6 + 8002f92: 6033 str r3, [r6, #0] + 8002f94: f000 f84b bl 800302e <__malloc_unlock> + 8002f98: e003 b.n 8002fa2 <_malloc_r+0x56> + 8002f9a: 2d00 cmp r5, #0 + 8002f9c: dadf bge.n 8002f5e <_malloc_r+0x12> + 8002f9e: 230c movs r3, #12 + 8002fa0: 6033 str r3, [r6, #0] + 8002fa2: 2000 movs r0, #0 + 8002fa4: bd70 pop {r4, r5, r6, pc} + 8002fa6: 680b ldr r3, [r1, #0] + 8002fa8: 1b5b subs r3, r3, r5 + 8002faa: d419 bmi.n 8002fe0 <_malloc_r+0x94> + 8002fac: 2b0b cmp r3, #11 + 8002fae: d903 bls.n 8002fb8 <_malloc_r+0x6c> + 8002fb0: 600b str r3, [r1, #0] + 8002fb2: 18cc adds r4, r1, r3 + 8002fb4: 6025 str r5, [r4, #0] + 8002fb6: e003 b.n 8002fc0 <_malloc_r+0x74> + 8002fb8: 684b ldr r3, [r1, #4] + 8002fba: 428c cmp r4, r1 + 8002fbc: d10d bne.n 8002fda <_malloc_r+0x8e> + 8002fbe: 6013 str r3, [r2, #0] + 8002fc0: 0030 movs r0, r6 + 8002fc2: f000 f834 bl 800302e <__malloc_unlock> + 8002fc6: 0020 movs r0, r4 + 8002fc8: 2207 movs r2, #7 + 8002fca: 300b adds r0, #11 + 8002fcc: 1d23 adds r3, r4, #4 + 8002fce: 4390 bics r0, r2 + 8002fd0: 1ac3 subs r3, r0, r3 + 8002fd2: d0e7 beq.n 8002fa4 <_malloc_r+0x58> + 8002fd4: 425a negs r2, r3 + 8002fd6: 50e2 str r2, [r4, r3] + 8002fd8: e7e4 b.n 8002fa4 <_malloc_r+0x58> + 8002fda: 6063 str r3, [r4, #4] + 8002fdc: 000c movs r4, r1 + 8002fde: e7ef b.n 8002fc0 <_malloc_r+0x74> + 8002fe0: 000c movs r4, r1 + 8002fe2: 6849 ldr r1, [r1, #4] + 8002fe4: e7c3 b.n 8002f6e <_malloc_r+0x22> + 8002fe6: 2303 movs r3, #3 + 8002fe8: 1cc4 adds r4, r0, #3 + 8002fea: 439c bics r4, r3 + 8002fec: 42a0 cmp r0, r4 + 8002fee: d0e1 beq.n 8002fb4 <_malloc_r+0x68> + 8002ff0: 1a21 subs r1, r4, r0 + 8002ff2: 0030 movs r0, r6 + 8002ff4: f000 f808 bl 8003008 <_sbrk_r> + 8002ff8: 1c43 adds r3, r0, #1 + 8002ffa: d1db bne.n 8002fb4 <_malloc_r+0x68> + 8002ffc: e7c7 b.n 8002f8e <_malloc_r+0x42> + 8002ffe: 46c0 nop ; (mov r8, r8) + 8003000: 2000009c .word 0x2000009c + 8003004: 200000a0 .word 0x200000a0 + +08003008 <_sbrk_r>: + 8003008: 2300 movs r3, #0 + 800300a: b570 push {r4, r5, r6, lr} + 800300c: 4c06 ldr r4, [pc, #24] ; (8003028 <_sbrk_r+0x20>) + 800300e: 0005 movs r5, r0 + 8003010: 0008 movs r0, r1 + 8003012: 6023 str r3, [r4, #0] + 8003014: f7fe fa8a bl 800152c <_sbrk> + 8003018: 1c43 adds r3, r0, #1 + 800301a: d103 bne.n 8003024 <_sbrk_r+0x1c> + 800301c: 6823 ldr r3, [r4, #0] + 800301e: 2b00 cmp r3, #0 + 8003020: d000 beq.n 8003024 <_sbrk_r+0x1c> + 8003022: 602b str r3, [r5, #0] + 8003024: bd70 pop {r4, r5, r6, pc} + 8003026: 46c0 nop ; (mov r8, r8) + 8003028: 200001b0 .word 0x200001b0 + +0800302c <__malloc_lock>: + 800302c: 4770 bx lr + +0800302e <__malloc_unlock>: + 800302e: 4770 bx lr + +08003030 <_init>: + 8003030: b5f8 push {r3, r4, r5, r6, r7, lr} + 8003032: 46c0 nop ; (mov r8, r8) + 8003034: bcf8 pop {r3, r4, r5, r6, r7} + 8003036: bc08 pop {r3} + 8003038: 469e mov lr, r3 + 800303a: 4770 bx lr + +0800303c <_fini>: + 800303c: b5f8 push {r3, r4, r5, r6, r7, lr} + 800303e: 46c0 nop ; (mov r8, r8) + 8003040: bcf8 pop {r3, r4, r5, r6, r7} + 8003042: bc08 pop {r3} + 8003044: 469e mov lr, r3 + 8003046: 4770 bx lr diff --git a/Relays/Debug/Relays.map b/Relays/Debug/Relays.map new file mode 100644 index 0000000..1320309 --- /dev/null +++ b/Relays/Debug/Relays.map @@ -0,0 +1,3537 @@ +Archive member included to satisfy reference by file (symbol) + +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + Core/Src/syscalls.o (__errno) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (exit) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) (_global_impure_ptr) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (__libc_init_array) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memcpy-stub.o) + Core/Src/MySensors.o (memcpy) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (memset) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + Core/Src/MySensors.o (srand) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strcpy.o) + Core/Src/MySensors.o (strcpy) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strlen.o) + Core/Src/MySensors.o (strlen) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) (malloc) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) (_free_r) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) (_malloc_r) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) (_sbrk_r) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) (__malloc_lock) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) (errno) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + Core/Src/system_stm32f0xx.o (__aeabi_uidiv) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_divsi3.o) + Core/Src/MySensors.o (__aeabi_idivmod) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) (__aeabi_idiv0) +/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_muldi3.o) + /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) (__aeabi_lmul) + +Allocating common symbols +Common symbol size file + +_recLen 0x1 Core/Src/MySensors.o +_header 0x6 Core/Src/MySensors.o +_packet_len 0x1 Core/Src/MySensors.o +_recStation 0x1 Core/Src/MySensors.o +errno 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) +_byte_received 0x1 Core/Src/MySensors.o +_huart 0x4 Core/Src/MySensors.o +_msg 0x21 Core/Src/MySensors.o +uwTick 0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o +_recCS 0x1 Core/Src/MySensors.o +pFlash 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o +_recCalcCS 0x1 Core/Src/MySensors.o +huart1 0x84 Core/Src/main.o +_msgTmp 0x21 Core/Src/MySensors.o +_recPos 0x1 Core/Src/MySensors.o +_packet_received 0x1 Core/Src/MySensors.o +_packet_from 0x1 Core/Src/MySensors.o +_recSender 0x1 Core/Src/MySensors.o +_recPhase 0x1 Core/Src/MySensors.o +_data 0x20 Core/Src/MySensors.o +_byte 0x1 Core/Src/MySensors.o +_recCommand 0x1 Core/Src/MySensors.o + +Discarded input sections + + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .data 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + .text 0x0000000000000000 0x78 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .ARM.extab 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .ARM.exidx 0x0000000000000000 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .ARM.attributes + 0x0000000000000000 0x1b /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/MySensors.o + .text 0x0000000000000000 0x0 Core/Src/MySensors.o + .data 0x0000000000000000 0x0 Core/Src/MySensors.o + .bss 0x0000000000000000 0x0 Core/Src/MySensors.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/main.o + .text 0x0000000000000000 0x0 Core/Src/main.o + .data 0x0000000000000000 0x0 Core/Src/main.o + .bss 0x0000000000000000 0x0 Core/Src/main.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/main.o + .debug_macro 0x0000000000000000 0x12d Core/Src/main.o + .debug_macro 0x0000000000000000 0x2e Core/Src/main.o + .debug_macro 0x0000000000000000 0x22 Core/Src/main.o + .debug_macro 0x0000000000000000 0x22 Core/Src/main.o + .debug_macro 0x0000000000000000 0x8e Core/Src/main.o + .debug_macro 0x0000000000000000 0x51 Core/Src/main.o + .debug_macro 0x0000000000000000 0xef Core/Src/main.o + .debug_macro 0x0000000000000000 0x6a Core/Src/main.o + .debug_macro 0x0000000000000000 0x1df Core/Src/main.o + .debug_macro 0x0000000000000000 0x1c Core/Src/main.o + .debug_macro 0x0000000000000000 0x22 Core/Src/main.o + .debug_macro 0x0000000000000000 0xb5 Core/Src/main.o + .debug_macro 0x0000000000000000 0x391 Core/Src/main.o + .debug_macro 0x0000000000000000 0x6e60 Core/Src/main.o + .debug_macro 0x0000000000000000 0x3c Core/Src/main.o + .debug_macro 0x0000000000000000 0x3461 Core/Src/main.o + .debug_macro 0x0000000000000000 0x174 Core/Src/main.o + .debug_macro 0x0000000000000000 0x55 Core/Src/main.o + .debug_macro 0x0000000000000000 0x924 Core/Src/main.o + .debug_macro 0x0000000000000000 0xe5 Core/Src/main.o + .debug_macro 0x0000000000000000 0x12f Core/Src/main.o + .debug_macro 0x0000000000000000 0xb3 Core/Src/main.o + .debug_macro 0x0000000000000000 0x1a0 Core/Src/main.o + .debug_macro 0x0000000000000000 0x1ed Core/Src/main.o + .debug_macro 0x0000000000000000 0x34 Core/Src/main.o + .debug_macro 0x0000000000000000 0x43 Core/Src/main.o + .debug_macro 0x0000000000000000 0x28 Core/Src/main.o + .debug_macro 0x0000000000000000 0xb0 Core/Src/main.o + .debug_macro 0x0000000000000000 0x15a Core/Src/main.o + .debug_macro 0x0000000000000000 0x22c Core/Src/main.o + .debug_macro 0x0000000000000000 0x60 Core/Src/main.o + .debug_macro 0x0000000000000000 0xa5 Core/Src/main.o + .debug_macro 0x0000000000000000 0x4c Core/Src/main.o + .debug_macro 0x0000000000000000 0x2b Core/Src/main.o + .debug_macro 0x0000000000000000 0x55f Core/Src/main.o + .debug_macro 0x0000000000000000 0x3e Core/Src/main.o + .debug_macro 0x0000000000000000 0xf1 Core/Src/main.o + .debug_macro 0x0000000000000000 0x58 Core/Src/main.o + .debug_macro 0x0000000000000000 0x46 Core/Src/main.o + .debug_macro 0x0000000000000000 0x18 Core/Src/main.o + .debug_macro 0x0000000000000000 0x3c Core/Src/main.o + .debug_macro 0x0000000000000000 0x34 Core/Src/main.o + .debug_macro 0x0000000000000000 0x52 Core/Src/main.o + .debug_macro 0x0000000000000000 0x1f Core/Src/main.o + .debug_macro 0x0000000000000000 0x43 Core/Src/main.o + .debug_macro 0x0000000000000000 0x20 Core/Src/main.o + .debug_macro 0x0000000000000000 0x1a3 Core/Src/main.o + .debug_macro 0x0000000000000000 0x32a Core/Src/main.o + .debug_macro 0x0000000000000000 0x10 Core/Src/main.o + .debug_macro 0x0000000000000000 0x35 Core/Src/main.o + .debug_macro 0x0000000000000000 0x20 Core/Src/main.o + .debug_macro 0x0000000000000000 0x58 Core/Src/main.o + .debug_macro 0x0000000000000000 0x112 Core/Src/main.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_hal_msp.o + .text 0x0000000000000000 0x0 Core/Src/stm32f0xx_hal_msp.o + .data 0x0000000000000000 0x0 Core/Src/stm32f0xx_hal_msp.o + .bss 0x0000000000000000 0x0 Core/Src/stm32f0xx_hal_msp.o + .text.HAL_UART_MspDeInit + 0x0000000000000000 0x48 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x12d Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x2e Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x8e Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x51 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xef Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x6a Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1df Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xb5 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x391 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x6e60 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x3c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x3461 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x174 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x55 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x924 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xe5 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x12f Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xb3 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1a0 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x1ed Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x34 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x43 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x28 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xb0 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x15a Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x22c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x60 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xa5 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x4c Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x2b Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x55f Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x3e Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0xf1 Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x0000000000000000 0x58 Core/Src/stm32f0xx_hal_msp.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/stm32f0xx_it.o + .text 0x0000000000000000 0x0 Core/Src/stm32f0xx_it.o + .data 0x0000000000000000 0x0 Core/Src/stm32f0xx_it.o + .bss 0x0000000000000000 0x0 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x12d Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x2e Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x8e Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x51 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xef Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x6a Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1df Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xb5 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x391 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x6e60 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x3c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x3461 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x174 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x55 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x924 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xe5 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x12f Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xb3 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1a0 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x1ed Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x34 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x43 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x28 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xb0 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x15a Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x22c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x60 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xa5 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x4c Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x2b Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x55f Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x3e Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0xf1 Core/Src/stm32f0xx_it.o + .debug_macro 0x0000000000000000 0x58 Core/Src/stm32f0xx_it.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/syscalls.o + .text 0x0000000000000000 0x0 Core/Src/syscalls.o + .data 0x0000000000000000 0x0 Core/Src/syscalls.o + .bss 0x0000000000000000 0x0 Core/Src/syscalls.o + .bss.__env 0x0000000000000000 0x4 Core/Src/syscalls.o + .data.environ 0x0000000000000000 0x4 Core/Src/syscalls.o + .text.initialise_monitor_handles + 0x0000000000000000 0xa Core/Src/syscalls.o + .text._getpid 0x0000000000000000 0xc Core/Src/syscalls.o + .text._kill 0x0000000000000000 0x20 Core/Src/syscalls.o + .text._exit 0x0000000000000000 0x18 Core/Src/syscalls.o + .text._read 0x0000000000000000 0x3a Core/Src/syscalls.o + .text._write 0x0000000000000000 0x38 Core/Src/syscalls.o + .text._close 0x0000000000000000 0x14 Core/Src/syscalls.o + .text._fstat 0x0000000000000000 0x1c Core/Src/syscalls.o + .text._isatty 0x0000000000000000 0x12 Core/Src/syscalls.o + .text._lseek 0x0000000000000000 0x16 Core/Src/syscalls.o + .text._open 0x0000000000000000 0x1c Core/Src/syscalls.o + .text._wait 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._unlink 0x0000000000000000 0x1e Core/Src/syscalls.o + .text._times 0x0000000000000000 0x14 Core/Src/syscalls.o + .text._stat 0x0000000000000000 0x1c Core/Src/syscalls.o + .text._link 0x0000000000000000 0x20 Core/Src/syscalls.o + .text._fork 0x0000000000000000 0x18 Core/Src/syscalls.o + .text._execve 0x0000000000000000 0x22 Core/Src/syscalls.o + .debug_info 0x0000000000000000 0xebd Core/Src/syscalls.o + .debug_abbrev 0x0000000000000000 0x261 Core/Src/syscalls.o + .debug_aranges + 0x0000000000000000 0xa8 Core/Src/syscalls.o + .debug_ranges 0x0000000000000000 0x98 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x243 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x22 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x18 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x94 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x3c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x34 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x57 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x174 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x330 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x52 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1f Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x43 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x20 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1a3 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x35 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x6a Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x52 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x40 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0xd7 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x3d Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x35 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x122 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x29 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x241 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x1c Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x10 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x145 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x189 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x16 Core/Src/syscalls.o + .debug_macro 0x0000000000000000 0x88 Core/Src/syscalls.o + .debug_line 0x0000000000000000 0x711 Core/Src/syscalls.o + .debug_str 0x0000000000000000 0x87e6 Core/Src/syscalls.o + .comment 0x0000000000000000 0x7c Core/Src/syscalls.o + .debug_frame 0x0000000000000000 0x244 Core/Src/syscalls.o + .ARM.attributes + 0x0000000000000000 0x31 Core/Src/syscalls.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/sysmem.o + .text 0x0000000000000000 0x0 Core/Src/sysmem.o + .data 0x0000000000000000 0x0 Core/Src/sysmem.o + .bss 0x0000000000000000 0x0 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x10 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x22 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x40 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x18 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x94 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x3c Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x34 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x174 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x57 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x52 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1f Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x43 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x20 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1a3 Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0xef Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x6a Core/Src/sysmem.o + .debug_macro 0x0000000000000000 0x1df Core/Src/sysmem.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .group 0x0000000000000000 0xc Core/Src/system_stm32f0xx.o + .text 0x0000000000000000 0x0 Core/Src/system_stm32f0xx.o + .data 0x0000000000000000 0x0 Core/Src/system_stm32f0xx.o + .bss 0x0000000000000000 0x0 Core/Src/system_stm32f0xx.o + .text.SystemCoreClockUpdate + 0x0000000000000000 0xe0 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xa48 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x2e Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x8e Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x51 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xef Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x6a Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1df Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xb5 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x391 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x6e60 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x3c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x12d Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x3461 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x174 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x55 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x924 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xe5 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x12f Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xb3 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1a0 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x1ed Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x34 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x43 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x28 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xb0 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x15a Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x22c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x60 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xa5 Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x4c Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x2b Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x55f Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0x3e Core/Src/system_stm32f0xx.o + .debug_macro 0x0000000000000000 0xf1 Core/Src/system_stm32f0xx.o + .text 0x0000000000000000 0x14 Core/Startup/startup_stm32f030f4px.o + .data 0x0000000000000000 0x0 Core/Startup/startup_stm32f030f4px.o + .bss 0x0000000000000000 0x0 Core/Startup/startup_stm32f030f4px.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DeInit + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_MspInit + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_MspDeInit + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetTickPrio + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_SetTickFreq + 0x0000000000000000 0x6c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetTickFreq + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_SuspendTick + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_ResumeTick + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetHalVersion + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetREVID + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetDEVID + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetUIDw0 + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetUIDw1 + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_GetUIDw2 + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_EnableDBGStopMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_DisableDBGStopMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_EnableDBGStandbyMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .text.HAL_DBGMCU_DisableDBGStandbyMode + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_DisableIRQ + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_GetPendingIRQ + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_SetPendingIRQ + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_ClearPendingIRQ + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_GetPriority + 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_SystemReset + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_DisableIRQ + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_SystemReset + 0x0000000000000000 0x8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_GetPriority + 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_SetPendingIRQ + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_GetPendingIRQ + 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_ClearPendingIRQ + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_SYSTICK_CLKSourceConfig + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_SYSTICK_IRQHandler + 0x0000000000000000 0xe Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_SYSTICK_Callback + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Init + 0x0000000000000000 0x90 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_DeInit + 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Start + 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Start_IT + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Abort + 0x0000000000000000 0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_Abort_IT + 0x0000000000000000 0x8c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_PollForTransfer + 0x0000000000000000 0x132 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_IRQHandler + 0x0000000000000000 0x144 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_RegisterCallback + 0x0000000000000000 0xa2 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_UnRegisterCallback + 0x0000000000000000 0xb4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .rodata.HAL_DMA_UnRegisterCallback + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_GetState + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.HAL_DMA_GetError + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.DMA_SetConfig + 0x0000000000000000 0x58 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .text.DMA_CalcBaseAndBitshift + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_info 0x0000000000000000 0x79f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_abbrev 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_aranges + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_ranges 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_line 0x0000000000000000 0x89c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_str 0x0000000000000000 0x55c68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .debug_frame 0x0000000000000000 0x1d0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_SetConfigLine + 0x0000000000000000 0x148 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GetConfigLine + 0x0000000000000000 0xfc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_ClearConfigLine + 0x0000000000000000 0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_RegisterCallback + 0x0000000000000000 0x42 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GetHandle + 0x0000000000000000 0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_IRQHandler + 0x0000000000000000 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GetPending + 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_ClearPending + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .text.HAL_EXTI_GenerateSWI + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_info 0x0000000000000000 0x59a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_abbrev 0x0000000000000000 0x193 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_aranges + 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_ranges 0x0000000000000000 0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_line 0x0000000000000000 0x785 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_str 0x0000000000000000 0x55a32 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .debug_frame 0x0000000000000000 0x130 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Program + 0x0000000000000000 0x12c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Program_IT + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_IRQHandler + 0x0000000000000000 0x1d0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_EndOfOperationCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OperationErrorCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Unlock + 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_Lock + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OB_Unlock + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OB_Lock + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_OB_Launch + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.HAL_FLASH_GetError + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.FLASH_Program_HalfWord + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.FLASH_WaitForLastOperation + 0x0000000000000000 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .text.FLASH_SetErrorCode + 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_info 0x0000000000000000 0x574 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_abbrev 0x0000000000000000 0x205 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_aranges + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_ranges 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_line 0x0000000000000000 0x848 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_str 0x0000000000000000 0x55b4b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .debug_frame 0x0000000000000000 0x1c4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + COMMON 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase + 0x0000000000000000 0xec Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase_IT + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBErase + 0x0000000000000000 0x9c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBProgram + 0x0000000000000000 0x128 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBGetConfig + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBGetUserData + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_MassErase + 0x0000000000000000 0x30 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_EnableWRP + 0x0000000000000000 0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_DisableWRP + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_RDP_LevelConfig + 0x0000000000000000 0xbc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_UserConfig + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_ProgramData + 0x0000000000000000 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_GetWRP + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_GetRDP + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_OB_GetUser + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .text.FLASH_PageErase + 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_info 0x0000000000000000 0x732 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_abbrev 0x0000000000000000 0x1f0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_aranges + 0x0000000000000000 0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_ranges 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1bf Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_line 0x0000000000000000 0x886 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_str 0x0000000000000000 0x55c9e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .debug_frame 0x0000000000000000 0x220 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_DeInit + 0x0000000000000000 0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_LockPin + 0x0000000000000000 0x52 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_EXTI_IRQHandler + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .text.HAL_GPIO_EXTI_Callback + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Init + 0x0000000000000000 0x12c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_DeInit + 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MspInit + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MspDeInit + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit + 0x0000000000000000 0x210 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Receive + 0x0000000000000000 0x210 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit + 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive + 0x0000000000000000 0x214 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit_IT + 0x0000000000000000 0xf8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Receive_IT + 0x0000000000000000 0xf8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit_IT + 0x0000000000000000 0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive_IT + 0x0000000000000000 0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit_DMA + 0x0000000000000000 0x20c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Receive_DMA + 0x0000000000000000 0x20c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit_DMA + 0x0000000000000000 0x180 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive_DMA + 0x0000000000000000 0x180 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Write + 0x0000000000000000 0x25c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Read + 0x0000000000000000 0x268 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Write_IT + 0x0000000000000000 0x150 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Read_IT + 0x0000000000000000 0x154 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Write_DMA + 0x0000000000000000 0x21c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Mem_Read_DMA + 0x0000000000000000 0x220 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_IsDeviceReady + 0x0000000000000000 0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Transmit_IT + 0x0000000000000000 0x124 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Transmit_DMA + 0x0000000000000000 0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Receive_IT + 0x0000000000000000 0x124 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Receive_DMA + 0x0000000000000000 0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Transmit_IT + 0x0000000000000000 0x160 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Transmit_DMA + 0x0000000000000000 0x298 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Receive_IT + 0x0000000000000000 0x164 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Receive_DMA + 0x0000000000000000 0x294 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_EnableListen_IT + 0x0000000000000000 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_DisableListen_IT + 0x0000000000000000 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_Master_Abort_IT + 0x0000000000000000 0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_EV_IRQHandler + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_ER_IRQHandler + 0x0000000000000000 0xc4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MasterTxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MasterRxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_SlaveTxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_SlaveRxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_AddrCallback + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_ListenCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MemTxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_MemRxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_ErrorCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_AbortCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_GetState + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_GetMode + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.HAL_I2C_GetError + 0x0000000000000000 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Master_ISR_IT + 0x0000000000000000 0x288 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Slave_ISR_IT + 0x0000000000000000 0x228 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Master_ISR_DMA + 0x0000000000000000 0x218 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Slave_ISR_DMA + 0x0000000000000000 0x1f0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_RequestMemoryWrite + 0x0000000000000000 0xc8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_RequestMemoryRead + 0x0000000000000000 0xc4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITAddrCplt + 0x0000000000000000 0x152 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITMasterSeqCplt + 0x0000000000000000 0x82 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITSlaveSeqCplt + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITMasterCplt + 0x0000000000000000 0x1a4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITSlaveCplt + 0x0000000000000000 0x24c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITListenCplt + 0x0000000000000000 0xb4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ITError + 0x0000000000000000 0x1c8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_TreatErrorCallback + 0x0000000000000000 0x52 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Flush_TXDR + 0x0000000000000000 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAMasterTransmitCplt + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMASlaveTransmitCplt + 0x0000000000000000 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAMasterReceiveCplt + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMASlaveReceiveCplt + 0x0000000000000000 0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAError + 0x0000000000000000 0x32 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_DMAAbort + 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnFlagUntilTimeout + 0x0000000000000000 0x7e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnTXISFlagUntilTimeout + 0x0000000000000000 0x7e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnSTOPFlagUntilTimeout + 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_WaitOnRXNEFlagUntilTimeout + 0x0000000000000000 0xd8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_IsAcknowledgeFailed + 0x0000000000000000 0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_TransferConfig + 0x0000000000000000 0x6c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Enable_IRQ + 0x0000000000000000 0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_Disable_IRQ + 0x0000000000000000 0xc6 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .text.I2C_ConvertOtherXferOptions + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_info 0x0000000000000000 0x1fb9 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_abbrev 0x0000000000000000 0x239 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_aranges + 0x0000000000000000 0x290 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_ranges 0x0000000000000000 0x280 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x272 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_line 0x0000000000000000 0x1a78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_str 0x0000000000000000 0x56b42 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .debug_frame 0x0000000000000000 0xa20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_ConfigAnalogFilter + 0x0000000000000000 0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_ConfigDigitalFilter + 0x0000000000000000 0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_EnableFastModePlus + 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .text.HAL_I2CEx_DisableFastModePlus + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_info 0x0000000000000000 0x869 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_abbrev 0x0000000000000000 0x1c8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_aranges + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_ranges 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_line 0x0000000000000000 0x746 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_str 0x0000000000000000 0x55dff Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .debug_frame 0x0000000000000000 0x90 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DeInit + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableBkUpAccess + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableBkUpAccess + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableWakeUpPin + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableWakeUpPin + 0x0000000000000000 0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnterSLEEPMode + 0x0000000000000000 0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnterSTOPMode + 0x0000000000000000 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnterSTANDBYMode + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableSleepOnExit + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableSleepOnExit + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_EnableSEVOnPend + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .text.HAL_PWR_DisableSEVOnPend + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_info 0x0000000000000000 0x43a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_abbrev 0x0000000000000000 0x15f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_aranges + 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_ranges 0x0000000000000000 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_line 0x0000000000000000 0x771 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_str 0x0000000000000000 0x559f9 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .debug_frame 0x0000000000000000 0x170 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_info 0x0000000000000000 0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1c5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_line 0x0000000000000000 0x686 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .debug_str 0x0000000000000000 0x5588b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_DeInit + 0x0000000000000000 0x10c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_MCOConfig + 0x0000000000000000 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_EnableCSS + 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_DisableCSS + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_GetOscConfig + 0x0000000000000000 0x134 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_GetClockConfig + 0x0000000000000000 0x54 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_NMI_IRQHandler + 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .text.HAL_RCC_CSSCallback + 0x0000000000000000 0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKConfig + 0x0000000000000000 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKFreq + 0x0000000000000000 0x144 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_info 0x0000000000000000 0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1ae Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_line 0x0000000000000000 0x683 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .debug_str 0x0000000000000000 0x55816 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_info 0x0000000000000000 0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_abbrev 0x0000000000000000 0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_aranges + 0x0000000000000000 0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_line 0x0000000000000000 0x686 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .debug_str 0x0000000000000000 0x55819 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_HalfDuplex_Init + 0x0000000000000000 0xa8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_MultiProcessor_Init + 0x0000000000000000 0xec Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_DeInit + 0x0000000000000000 0x74 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_MspInit + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_MspDeInit + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_Receive + 0x0000000000000000 0x1b8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_Transmit_IT + 0x0000000000000000 0xdc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_Receive_IT + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_Transmit_DMA + 0x0000000000000000 0x124 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_Receive_DMA + 0x0000000000000000 0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_DMAPause + 0x0000000000000000 0xa8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_DMAResume + 0x0000000000000000 0x8a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_DMAStop + 0x0000000000000000 0xda Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_Abort + 0x0000000000000000 0x140 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_AbortTransmit + 0x0000000000000000 0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_AbortReceive + 0x0000000000000000 0xd4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_Abort_IT + 0x0000000000000000 0x190 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_AbortTransmit_IT + 0x0000000000000000 0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_AbortReceive_IT + 0x0000000000000000 0x104 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_IRQHandler + 0x0000000000000000 0x3e4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_TxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_TxHalfCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_RxCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_RxHalfCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_ErrorCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_AbortCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_AbortTransmitCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_AbortReceiveCpltCallback + 0x0000000000000000 0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UARTEx_RxEventCallback + 0x0000000000000000 0x16 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_ReceiverTimeout_Config + 0x0000000000000000 0x26 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_EnableReceiverTimeout + 0x0000000000000000 0x5a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_DisableReceiverTimeout + 0x0000000000000000 0x5c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_MultiProcessor_EnableMuteMode + 0x0000000000000000 0x4e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_MultiProcessor_DisableMuteMode + 0x0000000000000000 0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_MultiProcessor_EnterMuteMode + 0x0000000000000000 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_HalfDuplex_EnableTransmitter + 0x0000000000000000 0x5c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_HalfDuplex_EnableReceiver + 0x0000000000000000 0x5c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_GetState + 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.HAL_UART_GetError + 0x0000000000000000 0x16 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_Start_Receive_IT + 0x0000000000000000 0xf4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_Start_Receive_DMA + 0x0000000000000000 0xdc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_EndTxTransfer + 0x0000000000000000 0x26 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_EndRxTransfer + 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMATransmitCplt + 0x0000000000000000 0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMATxHalfCplt + 0x0000000000000000 0x1e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMAReceiveCplt + 0x0000000000000000 0x9c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMARxHalfCplt + 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMAError + 0x0000000000000000 0x82 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMAAbortOnError + 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMATxAbortCallback + 0x0000000000000000 0x6c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMARxAbortCallback + 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMATxOnlyAbortCallback + 0x0000000000000000 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_DMARxOnlyAbortCallback + 0x0000000000000000 0x4a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_TxISR_8BIT + 0x0000000000000000 0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_TxISR_16BIT + 0x0000000000000000 0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_EndTransmit_IT + 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_RxISR_8BIT + 0x0000000000000000 0xec Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .text.UART_RxISR_16BIT + 0x0000000000000000 0xec Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .group 0x0000000000000000 0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .text 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .data 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .bss 0x0000000000000000 0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .text.HAL_RS485Ex_Init + 0x0000000000000000 0xe0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .text.HAL_MultiProcessorEx_AddressLength_Set + 0x0000000000000000 0x62 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .text.HAL_UARTEx_ReceiveToIdle + 0x0000000000000000 0x220 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .text.HAL_UARTEx_ReceiveToIdle_IT + 0x0000000000000000 0xbe Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .text.HAL_UARTEx_ReceiveToIdle_DMA + 0x0000000000000000 0xbe Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_info 0x0000000000000000 0x88f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_abbrev 0x0000000000000000 0x19a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_aranges + 0x0000000000000000 0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_ranges 0x0000000000000000 0x30 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x12d Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x55f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_macro 0x0000000000000000 0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_line 0x0000000000000000 0x804 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_str 0x0000000000000000 0x55d64 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .comment 0x0000000000000000 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .debug_frame 0x0000000000000000 0xb8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .ARM.attributes + 0x0000000000000000 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .text.exit 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .debug_frame 0x0000000000000000 0x28 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .ARM.attributes + 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .rodata._global_impure_ptr + 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memcpy-stub.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memcpy-stub.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memcpy-stub.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strcpy.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strcpy.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strcpy.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strlen.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strlen.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + .text.free 0x0000000000000000 0x14 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) + .text._free_r 0x0000000000000000 0x94 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) + .debug_frame 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) + .ARM.attributes + 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-freer.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + .text.cleanup_glue + 0x0000000000000000 0x1a /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + .text._reclaim_reent + 0x0000000000000000 0xcc /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_divsi3.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_divsi3.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_muldi3.o) + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_muldi3.o) + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .eh_frame 0x0000000000000000 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .ARM.attributes + 0x0000000000000000 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o + .text 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + .data 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + .bss 0x0000000000000000 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + +Memory Configuration + +Name Origin Length Attributes +RAM 0x0000000020000000 0x0000000000001000 xrw +FLASH 0x0000000008000000 0x0000000000004000 xr +*default* 0x0000000000000000 0xffffffffffffffff + +Linker script and memory map + +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o +LOAD Core/Src/MySensors.o +LOAD Core/Src/main.o +LOAD Core/Src/stm32f0xx_hal_msp.o +LOAD Core/Src/stm32f0xx_it.o +LOAD Core/Src/syscalls.o +LOAD Core/Src/sysmem.o +LOAD Core/Src/system_stm32f0xx.o +LOAD Core/Startup/startup_stm32f030f4px.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o +LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libstdc++_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libsupc++_nano.a +END GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libstdc++_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libm.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +END GROUP +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libnosys.a +END GROUP +START GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libnosys.a +END GROUP +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o +LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + 0x0000000020001000 _estack = (ORIGIN (RAM) + LENGTH (RAM)) + 0x0000000000000200 _Min_Heap_Size = 0x200 + 0x0000000000000400 _Min_Stack_Size = 0x400 + +.isr_vector 0x0000000008000000 0xc0 + 0x0000000008000000 . = ALIGN (0x4) + *(.isr_vector) + .isr_vector 0x0000000008000000 0xc0 Core/Startup/startup_stm32f030f4px.o + 0x0000000008000000 g_pfnVectors + 0x00000000080000c0 . = ALIGN (0x4) + +.text 0x00000000080000c0 0x2f88 + 0x00000000080000c0 . = ALIGN (0x4) + *(.text) + .text 0x00000000080000c0 0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + .text 0x0000000008000108 0xe /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strlen.o) + 0x0000000008000108 strlen + *fill* 0x0000000008000116 0x2 + .text 0x0000000008000118 0x114 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + 0x0000000008000118 __udivsi3 + 0x0000000008000118 __aeabi_uidiv + 0x0000000008000224 __aeabi_uidivmod + .text 0x000000000800022c 0x1d4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_divsi3.o) + 0x000000000800022c __aeabi_idiv + 0x000000000800022c __divsi3 + 0x00000000080003f8 __aeabi_idivmod + .text 0x0000000008000400 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + 0x0000000008000400 __aeabi_ldiv0 + 0x0000000008000400 __aeabi_idiv0 + .text 0x0000000008000404 0x54 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_muldi3.o) + 0x0000000008000404 __aeabi_lmul + 0x0000000008000404 __muldi3 + *(.text*) + .text.__NVIC_SystemReset + 0x0000000008000458 0x20 Core/Src/MySensors.o + .text.send 0x0000000008000478 0x42 Core/Src/MySensors.o + 0x0000000008000478 send + *fill* 0x00000000080004ba 0x2 + .text.sendHeartbeat + 0x00000000080004bc 0x60 Core/Src/MySensors.o + 0x00000000080004bc sendHeartbeat + .text.present 0x000000000800051c 0x7c Core/Src/MySensors.o + 0x000000000800051c present + .text.registerNode + 0x0000000008000598 0x48 Core/Src/MySensors.o + 0x0000000008000598 registerNode + .text.sendLibraryInfo + 0x00000000080005e0 0x54 Core/Src/MySensors.o + 0x00000000080005e0 sendLibraryInfo + .text.sendSketchInfo + 0x0000000008000634 0xf4 Core/Src/MySensors.o + 0x0000000008000634 sendSketchInfo + .text._processInternalCoreMessage + 0x0000000008000728 0x64 Core/Src/MySensors.o + 0x0000000008000728 _processInternalCoreMessage + .text.transportProcessMessage + 0x000000000800078c 0x184 Core/Src/MySensors.o + 0x000000000800078c transportProcessMessage + .text._serialReset + 0x0000000008000910 0x48 Core/Src/MySensors.o + 0x0000000008000910 _serialReset + .text._serialProcess + 0x0000000008000958 0x1f4 Core/Src/MySensors.o + 0x0000000008000958 _serialProcess + .text.transportSend + 0x0000000008000b4c 0x228 Core/Src/MySensors.o + 0x0000000008000b4c transportSend + .text.transportInitialise + 0x0000000008000d74 0x4c Core/Src/MySensors.o + 0x0000000008000d74 transportInitialise + .text.transportProcess + 0x0000000008000dc0 0x24 Core/Src/MySensors.o + 0x0000000008000dc0 transportProcess + .text.transportReceive + 0x0000000008000de4 0x44 Core/Src/MySensors.o + 0x0000000008000de4 transportReceive + .text.main 0x0000000008000e28 0x274 Core/Src/main.o + 0x0000000008000e28 main + .text.SystemClock_Config + 0x000000000800109c 0xc0 Core/Src/main.o + 0x000000000800109c SystemClock_Config + .text.MX_USART1_UART_Init + 0x000000000800115c 0x70 Core/Src/main.o + .text.MX_GPIO_Init + 0x00000000080011cc 0x128 Core/Src/main.o + .text.present_node + 0x00000000080012f4 0x78 Core/Src/main.o + 0x00000000080012f4 present_node + .text.receive 0x000000000800136c 0x6c Core/Src/main.o + 0x000000000800136c receive + .text.Error_Handler + 0x00000000080013d8 0x8 Core/Src/main.o + 0x00000000080013d8 Error_Handler + .text.HAL_MspInit + 0x00000000080013e0 0x48 Core/Src/stm32f0xx_hal_msp.o + 0x00000000080013e0 HAL_MspInit + .text.HAL_UART_MspInit + 0x0000000008001428 0xac Core/Src/stm32f0xx_hal_msp.o + 0x0000000008001428 HAL_UART_MspInit + .text.NMI_Handler + 0x00000000080014d4 0x6 Core/Src/stm32f0xx_it.o + 0x00000000080014d4 NMI_Handler + .text.HardFault_Handler + 0x00000000080014da 0x6 Core/Src/stm32f0xx_it.o + 0x00000000080014da HardFault_Handler + .text.SVC_Handler + 0x00000000080014e0 0xa Core/Src/stm32f0xx_it.o + 0x00000000080014e0 SVC_Handler + .text.PendSV_Handler + 0x00000000080014ea 0xa Core/Src/stm32f0xx_it.o + 0x00000000080014ea PendSV_Handler + .text.SysTick_Handler + 0x00000000080014f4 0xe Core/Src/stm32f0xx_it.o + 0x00000000080014f4 SysTick_Handler + *fill* 0x0000000008001502 0x2 + .text.USART1_IRQHandler + 0x0000000008001504 0x28 Core/Src/stm32f0xx_it.o + 0x0000000008001504 USART1_IRQHandler + .text._sbrk 0x000000000800152c 0x6c Core/Src/sysmem.o + 0x000000000800152c _sbrk + .text.SystemInit + 0x0000000008001598 0xa Core/Src/system_stm32f0xx.o + 0x0000000008001598 SystemInit + *fill* 0x00000000080015a2 0x2 + .text.Reset_Handler + 0x00000000080015a4 0x50 Core/Startup/startup_stm32f030f4px.o + 0x00000000080015a4 Reset_Handler + .text.Default_Handler + 0x00000000080015f4 0x2 Core/Startup/startup_stm32f030f4px.o + 0x00000000080015f4 TIM1_CC_IRQHandler + 0x00000000080015f4 I2C1_IRQHandler + 0x00000000080015f4 SPI1_IRQHandler + 0x00000000080015f4 EXTI2_3_IRQHandler + 0x00000000080015f4 ADC1_IRQHandler + 0x00000000080015f4 TIM17_IRQHandler + 0x00000000080015f4 RTC_IRQHandler + 0x00000000080015f4 TIM16_IRQHandler + 0x00000000080015f4 TIM3_IRQHandler + 0x00000000080015f4 EXTI4_15_IRQHandler + 0x00000000080015f4 RCC_IRQHandler + 0x00000000080015f4 DMA1_Channel1_IRQHandler + 0x00000000080015f4 Default_Handler + 0x00000000080015f4 TIM14_IRQHandler + 0x00000000080015f4 DMA1_Channel4_5_IRQHandler + 0x00000000080015f4 EXTI0_1_IRQHandler + 0x00000000080015f4 WWDG_IRQHandler + 0x00000000080015f4 DMA1_Channel2_3_IRQHandler + 0x00000000080015f4 FLASH_IRQHandler + 0x00000000080015f4 TIM1_BRK_UP_TRG_COM_IRQHandler + *fill* 0x00000000080015f6 0x2 + .text.HAL_Init + 0x00000000080015f8 0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x00000000080015f8 HAL_Init + .text.HAL_InitTick + 0x0000000008001620 0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000008001620 HAL_InitTick + .text.HAL_IncTick + 0x0000000008001688 0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000008001688 HAL_IncTick + .text.HAL_GetTick + 0x00000000080016ac 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x00000000080016ac HAL_GetTick + .text.HAL_Delay + 0x00000000080016c0 0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x00000000080016c0 HAL_Delay + .text.__NVIC_EnableIRQ + 0x0000000008001704 0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.__NVIC_SetPriority + 0x0000000008001738 0xdc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.SysTick_Config + 0x0000000008001814 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .text.HAL_NVIC_SetPriority + 0x000000000800185c 0x2a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + 0x000000000800185c HAL_NVIC_SetPriority + .text.HAL_NVIC_EnableIRQ + 0x0000000008001886 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + 0x0000000008001886 HAL_NVIC_EnableIRQ + .text.HAL_SYSTICK_Config + 0x00000000080018a6 0x1a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + 0x00000000080018a6 HAL_SYSTICK_Config + .text.HAL_GPIO_Init + 0x00000000080018c0 0x2e0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x00000000080018c0 HAL_GPIO_Init + .text.HAL_GPIO_ReadPin + 0x0000000008001ba0 0x3a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x0000000008001ba0 HAL_GPIO_ReadPin + .text.HAL_GPIO_WritePin + 0x0000000008001bda 0x3a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x0000000008001bda HAL_GPIO_WritePin + .text.HAL_GPIO_TogglePin + 0x0000000008001c14 0x36 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x0000000008001c14 HAL_GPIO_TogglePin + *fill* 0x0000000008001c4a 0x2 + .text.HAL_RCC_OscConfig + 0x0000000008001c4c 0x638 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x0000000008001c4c HAL_RCC_OscConfig + .text.HAL_RCC_ClockConfig + 0x0000000008002284 0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x0000000008002284 HAL_RCC_ClockConfig + .text.HAL_RCC_GetSysClockFreq + 0x0000000008002420 0xc8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x0000000008002420 HAL_RCC_GetSysClockFreq + .text.HAL_RCC_GetHCLKFreq + 0x00000000080024e8 0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x00000000080024e8 HAL_RCC_GetHCLKFreq + .text.HAL_RCC_GetPCLK1Freq + 0x00000000080024fc 0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x00000000080024fc HAL_RCC_GetPCLK1Freq + .text.HAL_RCCEx_PeriphCLKConfig + 0x0000000008002528 0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + 0x0000000008002528 HAL_RCCEx_PeriphCLKConfig + .text.HAL_UART_Init + 0x00000000080026c4 0xa8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + 0x00000000080026c4 HAL_UART_Init + .text.HAL_UART_Transmit + 0x000000000800276c 0x152 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + 0x000000000800276c HAL_UART_Transmit + *fill* 0x00000000080028be 0x2 + .text.UART_SetConfig + 0x00000000080028c0 0x24c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + 0x00000000080028c0 UART_SetConfig + .text.UART_AdvFeatureConfig + 0x0000000008002b0c 0x168 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + 0x0000000008002b0c UART_AdvFeatureConfig + .text.UART_CheckIdleState + 0x0000000008002c74 0x94 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + 0x0000000008002c74 UART_CheckIdleState + .text.UART_WaitOnFlagUntilTimeout + 0x0000000008002d08 0xfc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + 0x0000000008002d08 UART_WaitOnFlagUntilTimeout + .text.__errno 0x0000000008002e04 0xc /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + 0x0000000008002e04 __errno + .text.__libc_init_array + 0x0000000008002e10 0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + 0x0000000008002e10 __libc_init_array + .text.memcpy 0x0000000008002e58 0x12 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memcpy-stub.o) + 0x0000000008002e58 memcpy + .text.memset 0x0000000008002e6a 0x10 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + 0x0000000008002e6a memset + *fill* 0x0000000008002e7a 0x2 + .text.srand 0x0000000008002e7c 0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + 0x0000000008002e7c srand + .text.rand 0x0000000008002ec4 0x64 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + 0x0000000008002ec4 rand + .text.strcpy 0x0000000008002f28 0x10 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strcpy.o) + 0x0000000008002f28 strcpy + .text.malloc 0x0000000008002f38 0x14 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + 0x0000000008002f38 malloc + .text._malloc_r + 0x0000000008002f4c 0xbc /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + 0x0000000008002f4c _malloc_r + .text._sbrk_r 0x0000000008003008 0x24 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) + 0x0000000008003008 _sbrk_r + .text.__malloc_lock + 0x000000000800302c 0x2 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + 0x000000000800302c __malloc_lock + .text.__malloc_unlock + 0x000000000800302e 0x2 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + 0x000000000800302e __malloc_unlock + *(.glue_7) + .glue_7 0x0000000008003030 0x0 linker stubs + *(.glue_7t) + .glue_7t 0x0000000008003030 0x0 linker stubs + *(.eh_frame) + .eh_frame 0x0000000008003030 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + *(.init) + .init 0x0000000008003030 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + 0x0000000008003030 _init + .init 0x0000000008003034 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + *(.fini) + .fini 0x000000000800303c 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + 0x000000000800303c _fini + .fini 0x0000000008003040 0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o + 0x0000000008003048 . = ALIGN (0x4) + 0x0000000008003048 _etext = . + +.vfp11_veneer 0x0000000008003048 0x0 + .vfp11_veneer 0x0000000008003048 0x0 linker stubs + +.v4_bx 0x0000000008003048 0x0 + .v4_bx 0x0000000008003048 0x0 linker stubs + +.iplt 0x0000000008003048 0x0 + .iplt 0x0000000008003048 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + +.rodata 0x0000000008003048 0xa4 + 0x0000000008003048 . = ALIGN (0x4) + *(.rodata) + .rodata 0x0000000008003048 0x8 Core/Src/MySensors.o + .rodata 0x0000000008003050 0x50 Core/Src/main.o + .rodata 0x00000000080030a0 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + *(.rodata*) + .rodata._serialProcess + 0x00000000080030c0 0x14 Core/Src/MySensors.o + .rodata.AHBPrescTable + 0x00000000080030d4 0x10 Core/Src/system_stm32f0xx.o + 0x00000000080030d4 AHBPrescTable + .rodata.APBPrescTable + 0x00000000080030e4 0x8 Core/Src/system_stm32f0xx.o + 0x00000000080030e4 APBPrescTable + 0x00000000080030ec . = ALIGN (0x4) + +.rel.dyn 0x00000000080030ec 0x0 + .rel.iplt 0x00000000080030ec 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + +.ARM.extab 0x00000000080030ec 0x0 + 0x00000000080030ec . = ALIGN (0x4) + *(.ARM.extab* .gnu.linkonce.armextab.*) + 0x00000000080030ec . = ALIGN (0x4) + +.ARM 0x00000000080030ec 0x0 + 0x00000000080030ec . = ALIGN (0x4) + 0x00000000080030ec __exidx_start = . + *(.ARM.exidx*) + 0x00000000080030ec __exidx_end = . + 0x00000000080030ec . = ALIGN (0x4) + +.preinit_array 0x00000000080030ec 0x0 + 0x00000000080030ec . = ALIGN (0x4) + 0x00000000080030ec PROVIDE (__preinit_array_start = .) + *(.preinit_array*) + 0x00000000080030ec PROVIDE (__preinit_array_end = .) + 0x00000000080030ec . = ALIGN (0x4) + +.init_array 0x00000000080030ec 0x4 + 0x00000000080030ec . = ALIGN (0x4) + 0x00000000080030ec PROVIDE (__init_array_start = .) + *(SORT_BY_NAME(.init_array.*)) + *(.init_array*) + .init_array 0x00000000080030ec 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + 0x00000000080030f0 PROVIDE (__init_array_end = .) + 0x00000000080030f0 . = ALIGN (0x4) + +.fini_array 0x00000000080030f0 0x4 + 0x00000000080030f0 . = ALIGN (0x4) + [!provide] PROVIDE (__fini_array_start = .) + *(SORT_BY_NAME(.fini_array.*)) + *(.fini_array*) + .fini_array 0x00000000080030f0 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + [!provide] PROVIDE (__fini_array_end = .) + 0x00000000080030f4 . = ALIGN (0x4) + 0x00000000080030f4 _sidata = LOADADDR (.data) + +.data 0x0000000020000000 0x74 load address 0x00000000080030f4 + 0x0000000020000000 . = ALIGN (0x4) + 0x0000000020000000 _sdata = . + *(.data) + *(.data*) + .data.sentValue1.6133 + 0x0000000020000000 0x1 Core/Src/main.o + .data.sentValue2.6134 + 0x0000000020000001 0x1 Core/Src/main.o + *fill* 0x0000000020000002 0x2 + .data.SystemCoreClock + 0x0000000020000004 0x4 Core/Src/system_stm32f0xx.o + 0x0000000020000004 SystemCoreClock + .data.uwTickPrio + 0x0000000020000008 0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x0000000020000008 uwTickPrio + .data.uwTickFreq + 0x000000002000000c 0x1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x000000002000000c uwTickFreq + *fill* 0x000000002000000d 0x3 + .data._impure_ptr + 0x0000000020000010 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + 0x0000000020000010 _impure_ptr + .data.impure_data + 0x0000000020000014 0x60 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + *(.RamFunc) + *(.RamFunc*) + 0x0000000020000074 . = ALIGN (0x4) + 0x0000000020000074 _edata = . + +.igot.plt 0x0000000020000074 0x0 load address 0x0000000008003168 + .igot.plt 0x0000000020000074 0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + 0x0000000020000074 . = ALIGN (0x4) + +.bss 0x0000000020000074 0x140 load address 0x0000000008003168 + 0x0000000020000074 _sbss = . + 0x0000000020000074 __bss_start__ = _sbss + *(.bss) + .bss 0x0000000020000074 0x1c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + *(.bss*) + .bss.loopv.6131 + 0x0000000020000090 0x2 Core/Src/main.o + .bss.button.6136 + 0x0000000020000092 0x1 Core/Src/main.o + .bss.sentStatus.6135 + 0x0000000020000093 0x1 Core/Src/main.o + .bss.counter.6132 + 0x0000000020000094 0x2 Core/Src/main.o + *fill* 0x0000000020000096 0x2 + .bss.__sbrk_heap_end + 0x0000000020000098 0x4 Core/Src/sysmem.o + .bss.__malloc_free_list + 0x000000002000009c 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + 0x000000002000009c __malloc_free_list + .bss.__malloc_sbrk_start + 0x00000000200000a0 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + 0x00000000200000a0 __malloc_sbrk_start + *(COMMON) + COMMON 0x00000000200000a4 0x82 Core/Src/MySensors.o + 0x00000000200000a4 _recLen + 0x00000000200000a8 _header + 0x00000000200000ae _packet_len + 0x00000000200000af _recStation + 0x00000000200000b0 _byte_received + 0x00000000200000b4 _huart + 0x00000000200000b8 _msg + 0x00000000200000d9 _recCS + 0x00000000200000da _recCalcCS + 0x00000000200000dc _msgTmp + 0x00000000200000fd _recPos + 0x00000000200000fe _packet_received + 0x00000000200000ff _packet_from + 0x0000000020000100 _recSender + 0x0000000020000101 _recPhase + 0x0000000020000104 _data + 0x0000000020000124 _byte + 0x0000000020000125 _recCommand + *fill* 0x0000000020000126 0x2 + COMMON 0x0000000020000128 0x84 Core/Src/main.o + 0x0000000020000128 huart1 + COMMON 0x00000000200001ac 0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x00000000200001ac uwTick + COMMON 0x00000000200001b0 0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + 0x00000000200001b0 errno + 0x00000000200001b4 . = ALIGN (0x4) + 0x00000000200001b4 _ebss = . + 0x00000000200001b4 __bss_end__ = _ebss + +._user_heap_stack + 0x00000000200001b4 0x604 load address 0x0000000008003168 + 0x00000000200001b8 . = ALIGN (0x8) + *fill* 0x00000000200001b4 0x4 + [!provide] PROVIDE (end = .) + 0x00000000200001b8 PROVIDE (_end = .) + 0x00000000200003b8 . = (. + _Min_Heap_Size) + *fill* 0x00000000200001b8 0x200 + 0x00000000200007b8 . = (. + _Min_Stack_Size) + *fill* 0x00000000200003b8 0x400 + 0x00000000200007b8 . = ALIGN (0x8) + +/DISCARD/ + libc.a(*) + libm.a(*) + libgcc.a(*) + +.ARM.attributes + 0x0000000000000000 0x28 + *(.ARM.attributes) + .ARM.attributes + 0x0000000000000000 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o + .ARM.attributes + 0x000000000000001e 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o + .ARM.attributes + 0x000000000000004a 0x31 Core/Src/MySensors.o + .ARM.attributes + 0x000000000000007b 0x31 Core/Src/main.o + .ARM.attributes + 0x00000000000000ac 0x31 Core/Src/stm32f0xx_hal_msp.o + .ARM.attributes + 0x00000000000000dd 0x31 Core/Src/stm32f0xx_it.o + .ARM.attributes + 0x000000000000010e 0x31 Core/Src/sysmem.o + .ARM.attributes + 0x000000000000013f 0x31 Core/Src/system_stm32f0xx.o + .ARM.attributes + 0x0000000000000170 0x21 Core/Startup/startup_stm32f030f4px.o + .ARM.attributes + 0x0000000000000191 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .ARM.attributes + 0x00000000000001c2 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .ARM.attributes + 0x00000000000001f3 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .ARM.attributes + 0x0000000000000224 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .ARM.attributes + 0x0000000000000255 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .ARM.attributes + 0x0000000000000286 0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .ARM.attributes + 0x00000000000002b7 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .ARM.attributes + 0x00000000000002e3 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o) + .ARM.attributes + 0x000000000000030f 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .ARM.attributes + 0x000000000000033b 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memcpy-stub.o) + .ARM.attributes + 0x0000000000000367 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .ARM.attributes + 0x0000000000000393 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + .ARM.attributes + 0x00000000000003bf 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strcpy.o) + .ARM.attributes + 0x00000000000003eb 0x1c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strlen.o) + .ARM.attributes + 0x0000000000000407 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + .ARM.attributes + 0x0000000000000433 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + .ARM.attributes + 0x000000000000045f 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) + .ARM.attributes + 0x000000000000048b 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + .ARM.attributes + 0x00000000000004b7 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + .ARM.attributes + 0x00000000000004e3 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + .ARM.attributes + 0x0000000000000501 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_divsi3.o) + .ARM.attributes + 0x000000000000051f 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o) + .ARM.attributes + 0x000000000000053d 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_muldi3.o) + .ARM.attributes + 0x0000000000000569 0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o +OUTPUT(Relays.elf elf32-littlearm) + +.debug_info 0x0000000000000000 0x833f + .debug_info 0x0000000000000000 0x17f5 Core/Src/MySensors.o + .debug_info 0x00000000000017f5 0x1829 Core/Src/main.o + .debug_info 0x000000000000301e 0x9cc Core/Src/stm32f0xx_hal_msp.o + .debug_info 0x00000000000039ea 0x707 Core/Src/stm32f0xx_it.o + .debug_info 0x00000000000040f1 0x985 Core/Src/sysmem.o + .debug_info 0x0000000000004a76 0x29e Core/Src/system_stm32f0xx.o + .debug_info 0x0000000000004d14 0x22 Core/Startup/startup_stm32f030f4px.o + .debug_info 0x0000000000004d36 0x667 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_info 0x000000000000539d 0x744 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_info 0x0000000000005ae1 0x66f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_info 0x0000000000006150 0x80a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_info 0x000000000000695a 0x3cb Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_info 0x0000000000006d25 0x161a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + +.debug_abbrev 0x0000000000000000 0x17fb + .debug_abbrev 0x0000000000000000 0x35b Core/Src/MySensors.o + .debug_abbrev 0x000000000000035b 0x2ec Core/Src/main.o + .debug_abbrev 0x0000000000000647 0x1a6 Core/Src/stm32f0xx_hal_msp.o + .debug_abbrev 0x00000000000007ed 0x169 Core/Src/stm32f0xx_it.o + .debug_abbrev 0x0000000000000956 0x19b Core/Src/sysmem.o + .debug_abbrev 0x0000000000000af1 0x12b Core/Src/system_stm32f0xx.o + .debug_abbrev 0x0000000000000c1c 0x12 Core/Startup/startup_stm32f030f4px.o + .debug_abbrev 0x0000000000000c2e 0x1f2 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_abbrev 0x0000000000000e20 0x273 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_abbrev 0x0000000000001093 0x1c0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_abbrev 0x0000000000001253 0x20f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_abbrev 0x0000000000001462 0x175 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_abbrev 0x00000000000015d7 0x224 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + +.debug_aranges 0x0000000000000000 0x678 + .debug_aranges + 0x0000000000000000 0x90 Core/Src/MySensors.o + .debug_aranges + 0x0000000000000090 0x50 Core/Src/main.o + .debug_aranges + 0x00000000000000e0 0x30 Core/Src/stm32f0xx_hal_msp.o + .debug_aranges + 0x0000000000000110 0x48 Core/Src/stm32f0xx_it.o + .debug_aranges + 0x0000000000000158 0x20 Core/Src/sysmem.o + .debug_aranges + 0x0000000000000178 0x28 Core/Src/system_stm32f0xx.o + .debug_aranges + 0x00000000000001a0 0x28 Core/Startup/startup_stm32f030f4px.o + .debug_aranges + 0x00000000000001c8 0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_aranges + 0x0000000000000298 0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_aranges + 0x0000000000000358 0x58 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_aranges + 0x00000000000003b0 0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_aranges + 0x0000000000000430 0x30 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_aranges + 0x0000000000000460 0x218 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + +.debug_ranges 0x0000000000000000 0x5e0 + .debug_ranges 0x0000000000000000 0x80 Core/Src/MySensors.o + .debug_ranges 0x0000000000000080 0x40 Core/Src/main.o + .debug_ranges 0x00000000000000c0 0x20 Core/Src/stm32f0xx_hal_msp.o + .debug_ranges 0x00000000000000e0 0x38 Core/Src/stm32f0xx_it.o + .debug_ranges 0x0000000000000118 0x10 Core/Src/sysmem.o + .debug_ranges 0x0000000000000128 0x18 Core/Src/system_stm32f0xx.o + .debug_ranges 0x0000000000000140 0x20 Core/Startup/startup_stm32f030f4px.o + .debug_ranges 0x0000000000000160 0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_ranges 0x0000000000000220 0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_ranges 0x00000000000002d0 0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_ranges 0x0000000000000318 0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_ranges 0x0000000000000388 0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_ranges 0x00000000000003a8 0x238 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + +.debug_macro 0x0000000000000000 0xf717 + .debug_macro 0x0000000000000000 0x2eb Core/Src/MySensors.o + .debug_macro 0x00000000000002eb 0xa48 Core/Src/MySensors.o + .debug_macro 0x0000000000000d33 0x12d Core/Src/MySensors.o + .debug_macro 0x0000000000000e60 0x2e Core/Src/MySensors.o + .debug_macro 0x0000000000000e8e 0x22 Core/Src/MySensors.o + .debug_macro 0x0000000000000eb0 0x22 Core/Src/MySensors.o + .debug_macro 0x0000000000000ed2 0x8e Core/Src/MySensors.o + .debug_macro 0x0000000000000f60 0x51 Core/Src/MySensors.o + .debug_macro 0x0000000000000fb1 0xef Core/Src/MySensors.o + .debug_macro 0x00000000000010a0 0x6a Core/Src/MySensors.o + .debug_macro 0x000000000000110a 0x1df Core/Src/MySensors.o + .debug_macro 0x00000000000012e9 0x1c Core/Src/MySensors.o + .debug_macro 0x0000000000001305 0x22 Core/Src/MySensors.o + .debug_macro 0x0000000000001327 0xb5 Core/Src/MySensors.o + .debug_macro 0x00000000000013dc 0x391 Core/Src/MySensors.o + .debug_macro 0x000000000000176d 0x6e60 Core/Src/MySensors.o + .debug_macro 0x00000000000085cd 0x3c Core/Src/MySensors.o + .debug_macro 0x0000000000008609 0x3461 Core/Src/MySensors.o + .debug_macro 0x000000000000ba6a 0x174 Core/Src/MySensors.o + .debug_macro 0x000000000000bbde 0x55 Core/Src/MySensors.o + .debug_macro 0x000000000000bc33 0x924 Core/Src/MySensors.o + .debug_macro 0x000000000000c557 0xe5 Core/Src/MySensors.o + .debug_macro 0x000000000000c63c 0x12f Core/Src/MySensors.o + .debug_macro 0x000000000000c76b 0xb3 Core/Src/MySensors.o + .debug_macro 0x000000000000c81e 0x1a0 Core/Src/MySensors.o + .debug_macro 0x000000000000c9be 0x1ed Core/Src/MySensors.o + .debug_macro 0x000000000000cbab 0x34 Core/Src/MySensors.o + .debug_macro 0x000000000000cbdf 0x43 Core/Src/MySensors.o + .debug_macro 0x000000000000cc22 0x28 Core/Src/MySensors.o + .debug_macro 0x000000000000cc4a 0xb0 Core/Src/MySensors.o + .debug_macro 0x000000000000ccfa 0x15a Core/Src/MySensors.o + .debug_macro 0x000000000000ce54 0x22c Core/Src/MySensors.o + .debug_macro 0x000000000000d080 0x60 Core/Src/MySensors.o + .debug_macro 0x000000000000d0e0 0xa5 Core/Src/MySensors.o + .debug_macro 0x000000000000d185 0x4c Core/Src/MySensors.o + .debug_macro 0x000000000000d1d1 0x2b Core/Src/MySensors.o + .debug_macro 0x000000000000d1fc 0x55f Core/Src/MySensors.o + .debug_macro 0x000000000000d75b 0x3e Core/Src/MySensors.o + .debug_macro 0x000000000000d799 0xf1 Core/Src/MySensors.o + .debug_macro 0x000000000000d88a 0x58 Core/Src/MySensors.o + .debug_macro 0x000000000000d8e2 0x46 Core/Src/MySensors.o + .debug_macro 0x000000000000d928 0x18 Core/Src/MySensors.o + .debug_macro 0x000000000000d940 0x3c Core/Src/MySensors.o + .debug_macro 0x000000000000d97c 0x34 Core/Src/MySensors.o + .debug_macro 0x000000000000d9b0 0x52 Core/Src/MySensors.o + .debug_macro 0x000000000000da02 0x1f Core/Src/MySensors.o + .debug_macro 0x000000000000da21 0x43 Core/Src/MySensors.o + .debug_macro 0x000000000000da64 0x20 Core/Src/MySensors.o + .debug_macro 0x000000000000da84 0x1a3 Core/Src/MySensors.o + .debug_macro 0x000000000000dc27 0x32a Core/Src/MySensors.o + .debug_macro 0x000000000000df51 0x10 Core/Src/MySensors.o + .debug_macro 0x000000000000df61 0x35 Core/Src/MySensors.o + .debug_macro 0x000000000000df96 0x20 Core/Src/MySensors.o + .debug_macro 0x000000000000dfb6 0x16 Core/Src/MySensors.o + .debug_macro 0x000000000000dfcc 0x16 Core/Src/MySensors.o + .debug_macro 0x000000000000dfe2 0x29 Core/Src/MySensors.o + .debug_macro 0x000000000000e00b 0x58 Core/Src/MySensors.o + .debug_macro 0x000000000000e063 0x112 Core/Src/MySensors.o + .debug_macro 0x000000000000e175 0x2b1 Core/Src/main.o + .debug_macro 0x000000000000e426 0x1bc Core/Src/stm32f0xx_hal_msp.o + .debug_macro 0x000000000000e5e2 0x1c6 Core/Src/stm32f0xx_it.o + .debug_macro 0x000000000000e7a8 0xee Core/Src/sysmem.o + .debug_macro 0x000000000000e896 0x23b Core/Src/sysmem.o + .debug_macro 0x000000000000ead1 0x1ad Core/Src/system_stm32f0xx.o + .debug_macro 0x000000000000ec7e 0x1d1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_macro 0x000000000000ee4f 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_macro 0x000000000000effc 0x1e5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_macro 0x000000000000f1e1 0x1bf Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_macro 0x000000000000f3a0 0x1ad Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_macro 0x000000000000f54d 0x1ca Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + +.debug_line 0x0000000000000000 0x66f3 + .debug_line 0x0000000000000000 0xa7c Core/Src/MySensors.o + .debug_line 0x0000000000000a7c 0x8df Core/Src/main.o + .debug_line 0x000000000000135b 0x6ba Core/Src/stm32f0xx_hal_msp.o + .debug_line 0x0000000000001a15 0x6f4 Core/Src/stm32f0xx_it.o + .debug_line 0x0000000000002109 0x49a Core/Src/sysmem.o + .debug_line 0x00000000000025a3 0x6a2 Core/Src/system_stm32f0xx.o + .debug_line 0x0000000000002c45 0x89 Core/Startup/startup_stm32f030f4px.o + .debug_line 0x0000000000002cce 0x83e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_line 0x000000000000350c 0x856 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_line 0x0000000000003d62 0x801 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_line 0x0000000000004563 0x8ff Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_line 0x0000000000004e62 0x759 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_line 0x00000000000055bb 0x1138 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + +.debug_str 0x0000000000000000 0x5b783 + .debug_str 0x0000000000000000 0x598ba Core/Src/MySensors.o + 0x59c7c (size before relaxing) + .debug_str 0x00000000000598ba 0x57f Core/Src/main.o + 0x59c1f (size before relaxing) + .debug_str 0x0000000000059e39 0x14c Core/Src/stm32f0xx_hal_msp.o + 0x55f8a (size before relaxing) + .debug_str 0x0000000000059f85 0x88 Core/Src/stm32f0xx_it.o + 0x55db5 (size before relaxing) + .debug_str 0x000000000005a00d 0x4e9 Core/Src/sysmem.o + 0x5eb4 (size before relaxing) + .debug_str 0x000000000005a4f6 0x5f Core/Src/system_stm32f0xx.o + 0x55890 (size before relaxing) + .debug_str 0x000000000005a555 0x36 Core/Startup/startup_stm32f030f4px.o + 0x6a (size before relaxing) + .debug_str 0x000000000005a58b 0x313 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + 0x55d63 (size before relaxing) + .debug_str 0x000000000005a89e 0x1b6 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + 0x55c1b (size before relaxing) + .debug_str 0x000000000005aa54 0x20e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + 0x55b2c (size before relaxing) + .debug_str 0x000000000005ac62 0x240 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + 0x55c9a (size before relaxing) + .debug_str 0x000000000005aea2 0xb1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + 0x559cc (size before relaxing) + .debug_str 0x000000000005af53 0x830 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + 0x56501 (size before relaxing) + +.comment 0x0000000000000000 0x7b + .comment 0x0000000000000000 0x7b Core/Src/MySensors.o + 0x7c (size before relaxing) + .comment 0x000000000000007b 0x7c Core/Src/main.o + .comment 0x000000000000007b 0x7c Core/Src/stm32f0xx_hal_msp.o + .comment 0x000000000000007b 0x7c Core/Src/stm32f0xx_it.o + .comment 0x000000000000007b 0x7c Core/Src/sysmem.o + .comment 0x000000000000007b 0x7c Core/Src/system_stm32f0xx.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .comment 0x000000000000007b 0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + +.debug_frame 0x0000000000000000 0x1750 + .debug_frame 0x0000000000000000 0x1dc Core/Src/MySensors.o + .debug_frame 0x00000000000001dc 0xe8 Core/Src/main.o + .debug_frame 0x00000000000002c4 0x70 Core/Src/stm32f0xx_hal_msp.o + .debug_frame 0x0000000000000334 0xb8 Core/Src/stm32f0xx_it.o + .debug_frame 0x00000000000003ec 0x30 Core/Src/sysmem.o + .debug_frame 0x000000000000041c 0x4c Core/Src/system_stm32f0xx.o + .debug_frame 0x0000000000000468 0x2a4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o + .debug_frame 0x000000000000070c 0x2a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o + .debug_frame 0x00000000000009ac 0x110 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o + .debug_frame 0x0000000000000abc 0x198 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o + .debug_frame 0x0000000000000c54 0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o + .debug_frame 0x0000000000000cc4 0x810 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o + .debug_frame 0x00000000000014d4 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o) + .debug_frame 0x00000000000014f4 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o) + .debug_frame 0x0000000000001520 0x28 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memcpy-stub.o) + .debug_frame 0x0000000000001548 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o) + .debug_frame 0x0000000000001568 0x44 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-rand.o) + .debug_frame 0x00000000000015ac 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-strcpy.o) + .debug_frame 0x00000000000015cc 0x40 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-malloc.o) + .debug_frame 0x000000000000160c 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-nano-mallocr.o) + .debug_frame 0x0000000000001638 0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-sbrkr.o) + .debug_frame 0x0000000000001664 0x30 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-mlock.o) + .debug_frame 0x0000000000001694 0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-reent.o) + .debug_frame 0x00000000000016dc 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) + .debug_frame 0x00000000000016fc 0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_divsi3.o) + .debug_frame 0x000000000000171c 0x34 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_muldi3.o) diff --git a/Relays/Debug/makefile b/Relays/Debug/makefile new file mode 100644 index 0000000..2e4965f --- /dev/null +++ b/Relays/Debug/makefile @@ -0,0 +1,109 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +-include ../makefile.init + +RM := rm -rf + +# All of the sources participating in the build are defined here +-include sources.mk +-include Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk +-include Core/Startup/subdir.mk +-include Core/Src/subdir.mk +-include subdir.mk +-include objects.mk + +ifneq ($(MAKECMDGOALS),clean) +ifneq ($(strip $(CC_DEPS)),) +-include $(CC_DEPS) +endif +ifneq ($(strip $(C++_DEPS)),) +-include $(C++_DEPS) +endif +ifneq ($(strip $(C_UPPER_DEPS)),) +-include $(C_UPPER_DEPS) +endif +ifneq ($(strip $(CXX_DEPS)),) +-include $(CXX_DEPS) +endif +ifneq ($(strip $(S_DEPS)),) +-include $(S_DEPS) +endif +ifneq ($(strip $(S_UPPER_DEPS)),) +-include $(S_UPPER_DEPS) +endif +ifneq ($(strip $(C_DEPS)),) +-include $(C_DEPS) +endif +ifneq ($(strip $(CPP_DEPS)),) +-include $(CPP_DEPS) +endif +endif + +-include ../makefile.defs + +BUILD_ARTIFACT_NAME := Relays +BUILD_ARTIFACT_EXTENSION := elf +BUILD_ARTIFACT_PREFIX := +BUILD_ARTIFACT := $(BUILD_ARTIFACT_PREFIX)$(BUILD_ARTIFACT_NAME).$(BUILD_ARTIFACT_EXTENSION) + +# Add inputs and outputs from these tool invocations to the build variables +EXECUTABLES += \ +Relays.elf \ + +SIZE_OUTPUT += \ +default.size.stdout \ + +OBJDUMP_LIST += \ +Relays.list \ + +OBJCOPY_BIN += \ +Relays.bin \ + + +# All Target +all: main-build + +# Main-build Target +main-build: Relays.elf secondary-outputs + +# Tool invocations +Relays.elf: $(OBJS) $(USER_OBJS) /home/jof/STM32CubeIDE/workspace_1.5.0/Relays/STM32F030F4PX_FLASH.ld + arm-none-eabi-g++ -o "Relays.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m0 -T"/home/jof/STM32CubeIDE/workspace_1.5.0/Relays/STM32F030F4PX_FLASH.ld" --specs=nosys.specs -Wl,-Map="Relays.map" -Wl,--gc-sections -static --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -lstdc++ -lsupc++ -Wl,--end-group + @echo 'Finished building target: $@' + @echo ' ' + +default.size.stdout: $(EXECUTABLES) + arm-none-eabi-size $(EXECUTABLES) + @echo 'Finished building: $@' + @echo ' ' + +Relays.list: $(EXECUTABLES) + arm-none-eabi-objdump -h -S $(EXECUTABLES) > "Relays.list" + @echo 'Finished building: $@' + @echo ' ' + +Relays.bin: $(EXECUTABLES) + arm-none-eabi-objcopy -O binary $(EXECUTABLES) "Relays.bin" + @echo 'Finished building: $@' + @echo ' ' + +# Other Targets +clean: + -$(RM) * + -@echo ' ' + +secondary-outputs: $(SIZE_OUTPUT) $(OBJDUMP_LIST) $(OBJCOPY_BIN) + +fail-specified-linker-script-missing: + @echo 'Error: Cannot find the specified linker script. Check the linker settings in the build configuration.' + @exit 2 + +warn-no-linker-script-specified: + @echo 'Warning: No linker script specified. Check the linker settings in the build configuration.' + +.PHONY: all clean dependents fail-specified-linker-script-missing warn-no-linker-script-specified +.SECONDARY: + +-include ../makefile.targets diff --git a/Relays/Debug/objects.list b/Relays/Debug/objects.list new file mode 100644 index 0000000..524c9a8 --- /dev/null +++ b/Relays/Debug/objects.list @@ -0,0 +1,25 @@ +"Core/Src/MySensors.o" +"Core/Src/main.o" +"Core/Src/stm32f0xx_hal_msp.o" +"Core/Src/stm32f0xx_it.o" +"Core/Src/syscalls.o" +"Core/Src/sysmem.o" +"Core/Src/system_stm32f0xx.o" +"Core/Startup/startup_stm32f030f4px.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.o" +"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.o" diff --git a/Relays/Debug/objects.mk b/Relays/Debug/objects.mk new file mode 100644 index 0000000..742c2da --- /dev/null +++ b/Relays/Debug/objects.mk @@ -0,0 +1,8 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +USER_OBJS := + +LIBS := + diff --git a/Relays/Debug/sources.mk b/Relays/Debug/sources.mk new file mode 100644 index 0000000..3a566d6 --- /dev/null +++ b/Relays/Debug/sources.mk @@ -0,0 +1,35 @@ +################################################################################ +# Automatically-generated file. Do not edit! +################################################################################ + +ELF_SRCS := +C_UPPER_SRCS := +CXX_SRCS := +C++_SRCS := +OBJ_SRCS := +S_SRCS := +CC_SRCS := +C_SRCS := +CPP_SRCS := +S_UPPER_SRCS := +O_SRCS := +OBJDUMP_LIST := +C_UPPER_DEPS := +S_DEPS := +C_DEPS := +OBJCOPY_BIN := +CC_DEPS := +SIZE_OUTPUT := +C++_DEPS := +EXECUTABLES := +OBJS := +CXX_DEPS := +S_UPPER_DEPS := +CPP_DEPS := + +# Every subdirectory with source files must be described here +SUBDIRS := \ +Core/Src \ +Core/Startup \ +Drivers/STM32F0xx_HAL_Driver/Src \ + diff --git a/Relays/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h b/Relays/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h new file mode 100644 index 0000000..45ef5d5 --- /dev/null +++ b/Relays/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h @@ -0,0 +1,5359 @@ +/** + ****************************************************************************** + * @file stm32f030x6.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F0xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f030x6 + * @{ + */ + +#ifndef __STM32F030x6_H +#define __STM32F030x6_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + + /** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M0 Processor and Core Peripherals + */ +#define __CM0_REV 0 /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */ +#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F0xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ + +/****** STM32F0 specific Interrupt Numbers ******************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + USART1_IRQn = 27 /*!< USART1 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */ +#include "system_stm32f0xx.h" /* STM32F0xx System Header */ +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!
© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx + * @{ + */ + +#ifndef __STM32F0xx_H +#define __STM32F0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32F0) +#define STM32F0 +#endif /* STM32F0 */ + +/** Uncomment the line below according to the target STM32 device used in your application. + * stm32f0xxxx.h file contains: + * - All the peripheral register's definitions, bits definitions and memory mapping for STM32F0xxxx devices + * - IRQ channel definition + * - Peripheral memory mapping and physical registers address definition + * - Peripheral pointer declaration and driver header file inclusion + * - Product miscellaneous configuration: assert macros… + * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family’s superset. + */ + +#if !defined (STM32F030x6) && !defined (STM32F030x8) && \ + !defined (STM32F031x6) && !defined (STM32F038xx) && \ + !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \ + !defined (STM32F051x8) && !defined (STM32F058xx) && \ + !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \ + !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC) + /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */ + /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */ + /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F048xx */ /*!< STM32F048xx Devices (STM32F048xx microcontrollers where the Flash memory is 32 Kbytes) */ + /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */ + /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */ + /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ + /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ + /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */ + /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */ + /* #define STM32F091xC */ /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes) */ + /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */ +#endif +/* Legacy aliases */ +#if defined (STM32F048x6) + #define STM32F048xx +#endif /* STM32F048x6 */ + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V2.3.5 + */ +#define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ +#define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ +#define __STM32F0_DEVICE_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */ +#define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\ + |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\ + |(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\ + |(__STM32F0_DEVICE_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32F030x6) + #include "stm32f030x6.h" +#elif defined(STM32F030x8) + #include "stm32f030x8.h" +#elif defined(STM32F031x6) + #include "stm32f031x6.h" +#elif defined(STM32F038xx) + #include "stm32f038xx.h" +#elif defined(STM32F042x6) + #include "stm32f042x6.h" +#elif defined(STM32F048xx) + #include "stm32f048xx.h" +#elif defined(STM32F051x8) + #include "stm32f051x8.h" +#elif defined(STM32F058xx) + #include "stm32f058xx.h" +#elif defined(STM32F070x6) + #include "stm32f070x6.h" +#elif defined(STM32F070xB) + #include "stm32f070xb.h" +#elif defined(STM32F071xB) + #include "stm32f071xb.h" +#elif defined(STM32F072xB) + #include "stm32f072xb.h" +#elif defined(STM32F078xx) + #include "stm32f078xx.h" +#elif defined(STM32F091xC) + #include "stm32f091xc.h" +#elif defined(STM32F098xx) + #include "stm32f098xx.h" +#elif defined(STM32F030xC) + #include "stm32f030xc.h" +#else + #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0U, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0U, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + SUCCESS = 0U, + ERROR = !SUCCESS +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32f0xx_hal.h" +#endif /* USE_HAL_DRIVER */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F0xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h b/Relays/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h new file mode 100644 index 0000000..fafabf4 --- /dev/null +++ b/Relays/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h @@ -0,0 +1,105 @@ +/** + ****************************************************************************** + * @file system_stm32f0xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F0XX_H +#define __SYSTEM_STM32F0XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F0xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F0xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 3) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) by calling HAL API function HAL_RCC_ClockConfig() + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ +extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ +extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F0XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/CMSIS/Include/cmsis_armcc.h b/Relays/Drivers/CMSIS/Include/cmsis_armcc.h new file mode 100644 index 0000000..7d751fb --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/cmsis_armcc.h @@ -0,0 +1,865 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() do {\ + __schedule_barrier();\ + __isb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() do {\ + __schedule_barrier();\ + __dsb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() do {\ + __schedule_barrier();\ + __dmb(0xF);\ + __schedule_barrier();\ + } while (0U) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/Relays/Drivers/CMSIS/Include/cmsis_armclang.h b/Relays/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..d8031b0 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1869 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF); + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF); + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF); + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ (uint8_t)__builtin_clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Relays/Drivers/CMSIS/Include/cmsis_compiler.h b/Relays/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..79a2cac --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,266 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/Relays/Drivers/CMSIS/Include/cmsis_gcc.h b/Relays/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..1bd41a4 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2085 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.0.4 + * @date 09. April 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ (uint8_t)__builtin_clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/Relays/Drivers/CMSIS/Include/cmsis_iccarm.h b/Relays/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..3c90a2c --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,935 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.0.7 + * @date 19. June 2018 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2018 IAR Systems +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/Relays/Drivers/CMSIS/Include/cmsis_version.h b/Relays/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..ae3f2e3 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.2 + * @date 19. April 2017 + ******************************************************************************/ +/* + * Copyright (c) 2009-2017 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/Relays/Drivers/CMSIS/Include/core_armv8mbl.h b/Relays/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..ec76ab2 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1918 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 22. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_armv8mml.h b/Relays/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..2d0f106 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2927 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 06. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm0.h b/Relays/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..6f82227 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,949 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.5 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm0plus.h b/Relays/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..b9377e8 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1083 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm1.h b/Relays/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..fd1c407 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,976 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 23. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm23.h b/Relays/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..8202a8d --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1993 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 22. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm3.h b/Relays/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..b0dfbd3 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1941 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm33.h b/Relays/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..02f82e2 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,3002 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.0.9 + * @date 06. July 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_PCS_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm4.h b/Relays/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..308b868 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2129 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_cm7.h b/Relays/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..ada6c2a --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2671 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_INLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_INLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_INLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_INLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_INLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_INLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_INLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_INLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t)addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCIMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + int32_t op_size = dsize; + uint32_t op_addr = (uint32_t) addr; + int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + + __DSB(); + + while (op_size > 0) { + SCB->DCCIMVAC = op_addr; + op_addr += (uint32_t)linesize; + op_size -= linesize; + } + + __DSB(); + __ISB(); + #endif +} + + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_sc000.h b/Relays/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..9086c64 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1022 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.5 + * @date 28. May 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/core_sc300.h b/Relays/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..665822d --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1915 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + uint32_t RESERVED1[1U]; +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Relays/Drivers/CMSIS/Include/mpu_armv7.h b/Relays/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..7d4b600 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,270 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if non-shareable) or 010b (if shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/Relays/Drivers/CMSIS/Include/mpu_armv8.h b/Relays/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..99ee9f9 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,333 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M MPU + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/Relays/Drivers/CMSIS/Include/tz_context.h b/Relays/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..d4c1474 --- /dev/null +++ b/Relays/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..43cafcb --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3783 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ + +#if defined(STM32L1) + #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the events that can be selected to configure the + * set/reset crossbar of a timer output + */ +#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) +#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) +#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) +#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) +#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) +#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) +#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) +#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) +#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) + +#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) +#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) +#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) +#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) +#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) +#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) +#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) +#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) +#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) + +/** @brief Constants defining the event filtering applied to external events + * by a timer + */ +#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) + #define I2S_IT_TXE I2S_IT_TXP + #define I2S_IT_RXNE I2S_IT_RXP + + #define I2S_FLAG_TXE I2S_FLAG_TXP + #define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) + #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT + +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + + #define SPI_FLAG_TXE SPI_FLAG_TXP + #define SPI_FLAG_RXNE SPI_FLAG_RXP + + #define SPI_IT_TXE SPI_IT_TXP + #define SPI_IT_RXNE SPI_IT_RXP + + #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET + #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET + #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET + #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + + /** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ + /** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + + /** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) + #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h new file mode 100644 index 0000000..a100055 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h @@ -0,0 +1,585 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_H +#define __STM32F0xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_conf.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup HAL_Private_Macros + * @{ + */ +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \ + defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \ + defined(STM32F070xB) || defined(STM32F030x6) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#else +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#endif +#if defined(SYSCFG_CFGR1_PA11_PA12_RMP) +#define IS_HAL_REMAP_PIN(RMP) ((RMP) == HAL_REMAP_PA11_PA12) +#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ +#if defined(STM32F091xC) || defined(STM32F098xx) +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4)) +#endif /* STM32F091xC || STM32F098xx */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; + +/** + * @} + */ + +#if defined(SYSCFG_CFGR1_PA11_PA12_RMP) +/** @defgroup HAL_Pin_remapping HAL Pin remapping + * @{ + */ +#define HAL_REMAP_PA11_PA12 (SYSCFG_CFGR1_PA11_PA12_RMP) /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins). + 0: No remap (pin pair PA9/10 mapped on the pins) + 1: Remap (pin pair PA11/12 mapped instead of PA9/10) */ + +/** + * @} + */ +#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ + +#if defined(STM32F091xC) || defined(STM32F098xx) +/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection + * @note Applicable on STM32F09x + * @{ + */ +#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* 01: USART1 is selected as IRDA Modulation enveloppe source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 10: USART4 is selected as IRDA Modulation enveloppe source */ + +/** + * @} + */ +#endif /* STM32F091xC || STM32F098xx */ + + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO + * @{ + */ + +/** @brief Fast-mode Plus driving capability on a specific GPIO + */ +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \ + defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \ + defined(STM32F070xB) || defined(STM32F030x6) +#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast-mode Plus on PA9 */ +#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast-mode Plus on PA10 */ +#endif +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< Enable Fast-mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< Enable Fast-mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< Enable Fast-mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< Enable Fast-mode Plus on PB9 */ + +/** + * @} + */ + + +#if defined(STM32F091xC) || defined (STM32F098xx) +/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper + * @brief ISR Wrapper + * @note applicable on STM32F09x + * @{ + */ +#define HAL_SYSCFG_ITLINE0 ( 0x00000000U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE1 ( 0x00000001U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE2 ( 0x00000002U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE3 ( 0x00000003U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE4 ( 0x00000004U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE5 ( 0x00000005U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE6 ( 0x00000006U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE7 ( 0x00000007U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE8 ( 0x00000008U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE9 ( 0x00000009U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE10 ( 0x0000000AU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE11 ( 0x0000000BU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE12 ( 0x0000000CU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE13 ( 0x0000000DU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE14 ( 0x0000000EU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE15 ( 0x0000000FU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE16 ( 0x00000010U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE17 ( 0x00000011U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE18 ( 0x00000012U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE19 ( 0x00000013U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE20 ( 0x00000014U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE21 ( 0x00000015U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE22 ( 0x00000016U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE23 ( 0x00000017U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE24 ( 0x00000018U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE25 ( 0x00000019U) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE26 ( 0x0000001AU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE27 ( 0x0000001BU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE28 ( 0x0000001CU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE29 ( 0x0000001DU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE30 ( 0x0000001EU) /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE31 ( 0x0000001FU) /*!< Internal define for macro handling */ + +#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */ +#if defined(STM32F091xC) +#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */ +#endif +#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */ +#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */ +#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */ +#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */ +#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */ +#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */ +#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */ +#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */ +#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */ +#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */ +#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */ +#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */ +#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */ +#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */ +#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */ +#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */ +#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */ +#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */ +#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */ +#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */ +#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */ +#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */ +#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */ +#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */ +#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */ +#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */ +#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */ +#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */ +#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */ +#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */ +#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */ +#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */ +#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */ +#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */ +#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */ +#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */ +#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */ +#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */ +#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */ +#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */ +#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */ +#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */ +#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */ +#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */ +#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */ +#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */ +#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */ +#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */ +#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */ +#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */ +#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */ +#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */ +#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */ +#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */ +#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */ +#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */ +#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */ +#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */ +#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */ +#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */ +#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */ +#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */ +/** + * @} + */ +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup HAL_Freeze_Unfreeze_Peripherals HAL Freeze Unfreeze Peripherals + * @brief Freeze/Unfreeze Peripherals in Debug mode + * @{ + */ + +#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP) +#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP)) +#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) +#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) +#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */ + +#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) +#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) +#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */ + +#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP) +#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) +#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP) +#define __HAL_DBGMCU_FREEZE_TIM15() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM15() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM16() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */ + +#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM17() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP)) +#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */ + +/** + * @} + */ + +/** @defgroup Memory_Mapping_Selection Memory Mapping Selection + * @{ + */ +#if defined(SYSCFG_CFGR1_MEM_MODE) +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE)) +#endif /* SYSCFG_CFGR1_MEM_MODE */ + +#if defined(SYSCFG_CFGR1_MEM_MODE_0) +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \ + SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \ + }while(0) +#endif /* SYSCFG_CFGR1_MEM_MODE_0 */ + +#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1) +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \ + SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \ + }while(0) +#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */ +/** + * @} + */ + + +#if defined(SYSCFG_CFGR1_PA11_PA12_RMP) +/** @defgroup HAL_Pin_remap HAL Pin remap + * @brief Pin remapping enable/disable macros + * @param __PIN_REMAP__ This parameter can be a value of @ref HAL_Pin_remapping + * @{ + */ +#define __HAL_REMAP_PIN_ENABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \ + SYSCFG->CFGR1 |= (__PIN_REMAP__); \ + }while(0) +#define __HAL_REMAP_PIN_DISABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \ + SYSCFG->CFGR1 &= ~(__PIN_REMAP__); \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */ + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO values. + * That you can find above these macros. + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) +#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) +/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable + * @{ + */ +/** @brief SYSCFG Break Lockup lock + * Enables and locks the connection of Cortex-M0 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */ + +#if defined(SYSCFG_CFGR2_PVD_LOCK) +/** @defgroup PVD_Lock_Enable PVD Lock + * @{ + */ +/** @brief SYSCFG Break PVD lock + * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_PVD_LOCK */ + +#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK) +/** @defgroup SRAM_Parity_Lock SRAM Parity Lock + * @{ + */ +/** @brief SYSCFG Break SRAM PARITY lock + * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17 + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \ + }while(0) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */ + +#if defined(SYSCFG_CFGR2_SRAM_PEF) +/** @defgroup HAL_SYSCFG_Parity_check_on_RAM HAL SYSCFG Parity check on RAM + * @brief Parity check on RAM disable macro + * @note Disabling the parity check on RAM locks the configuration bit. + * To re-enable the parity check on RAM perform a system reset. + * @{ + */ +#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PEF) +/** + * @} + */ +#endif /* SYSCFG_CFGR2_SRAM_PEF */ + + +#if defined(STM32F091xC) || defined (STM32F098xx) +/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check + * @brief ISR wrapper check + * @note This feature is applicable on STM32F09x + * @note Allow to determine interrupt source per line. + * @{ + */ +#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF)) +/** + * @} + */ +#endif /* (STM32F091xC) || defined (STM32F098xx)*/ + +#if defined(STM32F091xC) || defined (STM32F098xx) +/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection + * @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register + * @note This feature is applicable on STM32F09x + * @param __SOURCE__ This parameter can be a value of @ref HAL_IRDA_ENV_SEL + * @{ + */ +#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__))); \ + SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_IRDA_ENV_SEL); \ + SYSCFG->CFGR1 |= (__SOURCE__); \ + }while(0) + +#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0) +/** + * @} + */ +#endif /* (STM32F091xC) || defined (STM32F098xx)*/ + +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h new file mode 100644 index 0000000..e471200 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h @@ -0,0 +1,133 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_CORTEX_H +#define __STM32F0xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX CORTEX + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 (0x00000000U) +#define SYSTICK_CLKSOURCE_HCLK (0x00000004U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported Macros -----------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ +/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions *******************************/ +void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ + +/* Peripheral Control functions *************************************************/ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_CORTEX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h new file mode 100644 index 0000000..b2f6105 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h @@ -0,0 +1,178 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_DEF +#define __STM32F0xx_HAL_DEF + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) + /* Reserved for future use */ + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5*/ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ___STM32F0xx_HAL_DEF */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h new file mode 100644 index 0000000..db71942 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h @@ -0,0 +1,563 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_DMA_H +#define __STM32F0xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ +} DMA_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER (0x00000004U) /*!< no ongoin transfer */ +#define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE (0x00000000U) /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE (0x00000000U) /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE (0x00000000U) /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE (0x00000000U) /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL (0x00000000U) /*!< Normal Mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW (0x00000000U) /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ + +#define DMA_FLAG_GL1 (0x00000001U) /*!< Channel 1 global interrupt flag */ +#define DMA_FLAG_TC1 (0x00000002U) /*!< Channel 1 transfer complete flag */ +#define DMA_FLAG_HT1 (0x00000004U) /*!< Channel 1 half transfer flag */ +#define DMA_FLAG_TE1 (0x00000008U) /*!< Channel 1 transfer error flag */ +#define DMA_FLAG_GL2 (0x00000010U) /*!< Channel 2 global interrupt flag */ +#define DMA_FLAG_TC2 (0x00000020U) /*!< Channel 2 transfer complete flag */ +#define DMA_FLAG_HT2 (0x00000040U) /*!< Channel 2 half transfer flag */ +#define DMA_FLAG_TE2 (0x00000080U) /*!< Channel 2 transfer error flag */ +#define DMA_FLAG_GL3 (0x00000100U) /*!< Channel 3 global interrupt flag */ +#define DMA_FLAG_TC3 (0x00000200U) /*!< Channel 3 transfer complete flag */ +#define DMA_FLAG_HT3 (0x00000400U) /*!< Channel 3 half transfer flag */ +#define DMA_FLAG_TE3 (0x00000800U) /*!< Channel 3 transfer error flag */ +#define DMA_FLAG_GL4 (0x00001000U) /*!< Channel 4 global interrupt flag */ +#define DMA_FLAG_TC4 (0x00002000U) /*!< Channel 4 transfer complete flag */ +#define DMA_FLAG_HT4 (0x00004000U) /*!< Channel 4 half transfer flag */ +#define DMA_FLAG_TE4 (0x00008000U) /*!< Channel 4 transfer error flag */ +#define DMA_FLAG_GL5 (0x00010000U) /*!< Channel 5 global interrupt flag */ +#define DMA_FLAG_TC5 (0x00020000U) /*!< Channel 5 transfer complete flag */ +#define DMA_FLAG_HT5 (0x00040000U) /*!< Channel 5 half transfer flag */ +#define DMA_FLAG_TE5 (0x00080000U) /*!< Channel 5 transfer error flag */ +#define DMA_FLAG_GL6 (0x00100000U) /*!< Channel 6 global interrupt flag */ +#define DMA_FLAG_TC6 (0x00200000U) /*!< Channel 6 transfer complete flag */ +#define DMA_FLAG_HT6 (0x00400000U) /*!< Channel 6 half transfer flag */ +#define DMA_FLAG_TE6 (0x00800000U) /*!< Channel 6 transfer error flag */ +#define DMA_FLAG_GL7 (0x01000000U) /*!< Channel 7 global interrupt flag */ +#define DMA_FLAG_TC7 (0x02000000U) /*!< Channel 7 transfer complete flag */ +#define DMA_FLAG_HT7 (0x04000000U) /*!< Channel 7 half transfer flag */ +#define DMA_FLAG_TE7 (0x08000000U) /*!< Channel 7 transfer error flag */ + +/** + * @} + */ + +#if defined(SYSCFG_CFGR1_DMA_RMP) +/** @defgroup HAL_DMA_remapping HAL DMA remapping + * Elements values convention: 0xYYYYYYYY + * - YYYYYYYY : Position in the SYSCFG register CFGR1 + * @{ + */ +#define DMA_REMAP_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap + 0: No remap (ADC DMA requests mapped on DMA channel 1 + 1: Remap (ADC DMA requests mapped on DMA channel 2 */ +#define DMA_REMAP_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap + 0: No remap (USART1_TX DMA request mapped on DMA channel 2 + 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */ +#define DMA_REMAP_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap + 0: No remap (USART1_RX DMA request mapped on DMA channel 3 + 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */ +#define DMA_REMAP_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap + 0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3) + 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */ +#define DMA_REMAP_TIM17_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap + 0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 + 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */ +#if defined (STM32F070xB) +#define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F070xB devices only. + 0: Disabled, need to remap before use + 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ + +#endif + +#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) +#define DMA_REMAP_TIM16_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only + 0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit) + 1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */ +#define DMA_REMAP_TIM17_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only + 0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit) + 1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */ +#define DMA_REMAP_SPI2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively) + 1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ +#define DMA_REMAP_USART2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively) + 1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ +#define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively) + 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ +#define DMA_REMAP_I2C1_DMA_CH76 ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively) + 1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */ +#define DMA_REMAP_TIM1_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively) + 1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */ +#define DMA_REMAP_TIM2_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively) + 1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */ +#define DMA_REMAP_TIM3_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only. + 0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4) + 1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */ +#endif + +/** + * @} + */ + +#endif /* SYSCFG_CFGR1_DMA_RMP */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__ DMA handle. + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + + +/* Interrupt & Flag management */ + +/** + * @brief Enables the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disables the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Returns the number of remaining data units in the current DMAy Channelx transfer. + * @param __HANDLE__ DMA handle + * + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +#if defined(SYSCFG_CFGR1_DMA_RMP) +/** @brief DMA remapping enable/disable macros + * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_remapping + */ +#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \ + SYSCFG->CFGR1 |= (__DMA_REMAP__); \ + }while(0) +#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \ + SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \ + }while(0) +#endif /* SYSCFG_CFGR1_DMA_RMP */ + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32f0xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* Input and Output operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Macros + * @{ + */ +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#if defined(SYSCFG_CFGR1_DMA_RMP) + +#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) +#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ + ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ + ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH2) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH6) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH7) || \ + ((RMP) == DMA_REMAP_SPI2_DMA_CH67) || \ + ((RMP) == DMA_REMAP_USART2_DMA_CH67) || \ + ((RMP) == DMA_REMAP_USART3_DMA_CH32) || \ + ((RMP) == DMA_REMAP_I2C1_DMA_CH76) || \ + ((RMP) == DMA_REMAP_TIM1_DMA_CH6) || \ + ((RMP) == DMA_REMAP_TIM2_DMA_CH7) || \ + ((RMP) == DMA_REMAP_TIM3_DMA_CH6)) +#elif defined (STM32F070xB) +#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_USART3_DMA_CH32) || \ + ((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ + ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ + ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH2)) +#else +#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ + ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ + ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ + ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ + ((RMP) == DMA_REMAP_TIM17_DMA_CH2)) +#endif + +#endif /* SYSCFG_CFGR1_DMA_RMP */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h new file mode 100644 index 0000000..185f833 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h @@ -0,0 +1,811 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_DMA_EX_H +#define __STM32F0xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ +#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#if !defined(STM32F030xC) +#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */ +#endif /* !defined(STM32F030xC) */ + +/****************** DMA1 remap bit field definition********************/ +/* DMA1 - Channel 1 */ +#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/ +#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */ +#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */ +#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 2 */ +#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */ +#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */ +#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */ +#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */ +#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 3 */ +#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */ +#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */ +#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 4 */ +#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */ +#endif /* !defined(STM32F030xC) */ +#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */ +#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */ +#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */ +#endif /* !defined(STM32F030xC) */ + +/* DMA1 - Channel 5 */ +#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */ +#if !defined(STM32F030xC) +#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */ +#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */ +#endif /* !defined(STM32F030xC) */ + +#if !defined(STM32F030xC) +/* DMA1 - Channel 6 */ +#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */ +#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */ +#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */ +/* DMA1 - Channel 7 */ +#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */ +#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */ +#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */ +#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */ + +/****************** DMA2 remap bit field definition********************/ +/* DMA2 - Channel 1 */ +#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */ +#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */ +/* DMA2 - Channel 2 */ +#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */ +#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */ +/* DMA2 - Channel 3 */ +#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */ +#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */ +#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */ +#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */ +/* DMA2 - Channel 4 */ +#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */ +#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */ +#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */ +#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */ +/* DMA2 - Channel 5 */ +#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */ +#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */ +#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */ +#endif /* !defined(STM32F030xC) */ + +#if defined(STM32F091xC) || defined(STM32F098xx) +#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH1_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH2_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART7_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART8_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_DAC_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM2_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_DAC_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM2_CH4) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART7_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART8_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH6_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH6_SPI2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM1_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM1_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM1_CH3) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM3_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM3_TRIG) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH6_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART7_RX) ||\ + ((REQUEST) == HAL_DMA1_CH6_USART8_RX) ||\ + ((REQUEST) == HAL_DMA1_CH7_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH7_I2C1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH7_SPI2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM2_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM2_CH4) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH7_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART7_TX) ||\ + ((REQUEST) == HAL_DMA1_CH7_USART8_TX)) + +#define IS_HAL_DMA2_REMAP(REQUEST) (((REQUEST) == HAL_DMA2_CH1_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH1_I2C2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART3_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART4_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART5_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART6_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART7_TX) ||\ + ((REQUEST) == HAL_DMA2_CH1_USART8_TX) ||\ + ((REQUEST) == HAL_DMA2_CH2_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH2_I2C2_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART1_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART2_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART3_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART4_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART5_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART6_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART7_RX) ||\ + ((REQUEST) == HAL_DMA2_CH2_USART8_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH3_TIM6_UP) ||\ + ((REQUEST) == HAL_DMA2_CH3_DAC_CH1) ||\ + ((REQUEST) == HAL_DMA2_CH3_SPI1_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART1_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART2_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART3_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART4_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART5_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART6_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART7_RX) ||\ + ((REQUEST) == HAL_DMA2_CH3_USART8_RX) ||\ + ((REQUEST) == HAL_DMA2_CH4_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH4_TIM7_UP) ||\ + ((REQUEST) == HAL_DMA2_CH4_DAC_CH2) ||\ + ((REQUEST) == HAL_DMA2_CH4_SPI1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART3_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART4_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART5_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART6_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART7_TX) ||\ + ((REQUEST) == HAL_DMA2_CH4_USART8_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_DEFAULT) ||\ + ((REQUEST) == HAL_DMA2_CH5_ADC) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART1_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART2_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART3_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART4_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART5_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\ + ((REQUEST) == HAL_DMA2_CH5_USART8_TX )) +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030xC) +#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH1_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH2_ADC) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\ + ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\ + ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\ + ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\ + ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\ + ((REQUEST) == HAL_DMA1_CH5_USART6_RX)) +#endif /* STM32F030xC */ + +/** + * @} + */ +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup DMAEx_Exported_Macros DMAEx Exported Macros + * @{ + */ +/* Interrupt & Flag management */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + DMA_FLAG_GL7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_7 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +#elif defined(STM32F091xC) || defined(STM32F098xx) +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\ + DMA_FLAG_GL5) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\ + (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\ + (DMA1->IFCR = (__FLAG__))) + +#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */ +/** + * @brief Returns the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) + +/** + * @brief Returns the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) + +/** + * @brief Returns the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\ + DMA_FLAG_GL5) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_5 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ + +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clears the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * Where x can be 1_5 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +#endif + + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) +#define __HAL_DMA1_REMAP(__REQUEST__) \ + do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \ + DMA1->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \ + DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU); \ + }while(0) + +#if defined(STM32F091xC) || defined(STM32F098xx) +#define __HAL_DMA2_REMAP(__REQUEST__) \ + do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \ + DMA2->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \ + DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU); \ + }while(0) +#endif /* STM32F091xC || STM32F098xx */ + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_DMA_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h new file mode 100644 index 0000000..7dc4823 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h @@ -0,0 +1,375 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_EXTI_H +#define STM32F0xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ + +/** + * @brief HAL EXTI common Callback ID enumeration definition + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U +} EXTI_CallbackIDTypeDef; + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ +#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ +#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ +#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ +#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ +#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ +#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ +#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ +#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ +#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ +#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ +#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ +#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ +#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ +#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ +#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ + +#if defined (EXTI_IMR_MR16) +#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ +#else +#define EXTI_LINE_16 (EXTI_RESERVED | 0x10u) +#endif /* EXTI_IMR_MR16 */ + +#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ + +#if defined (EXTI_IMR_MR18) +#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ +#else +#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) +#endif /* EXTI_IMR_MR18 */ + +#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ + +#if defined (EXTI_IMR_MR20) +#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ +#else +#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) +#endif /* EXTI_IMR_MR20 */ + +#if defined (EXTI_IMR_MR21) +#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the Comparator 1 output */ +#else +#define EXTI_LINE_21 (EXTI_RESERVED | 0x15u) +#endif /* EXTI_IMR_MR21 */ + +#if defined (EXTI_IMR_MR22) +#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the Comparator 2 output */ +#else +#define EXTI_LINE_22 (EXTI_RESERVED | 0x16u) +#endif /* EXTI_IMR_MR22 */ + +#if defined (EXTI_IMR_MR23) +#define EXTI_LINE_23 (EXTI_DIRECT | 0x17u) /*!< External interrupt line 23 Connected to the internal I2C1 wakeup event */ +#else +#define EXTI_LINE_23 (EXTI_RESERVED | 0x17u) +#endif /* EXTI_IMR_MR23 */ + +#define EXTI_LINE_24 (EXTI_RESERVED | 0x18u) + +#if defined (EXTI_IMR_MR25) +#define EXTI_LINE_25 (EXTI_CONFIG | 0x19u) /*!< External interrupt line 25 Connected to the internal USART1 wakeup event */ +#else +#define EXTI_LINE_25 (EXTI_RESERVED | 0x19u) +#endif /* EXTI_IMR_MR25 */ + +#if defined (EXTI_IMR_MR26) +#define EXTI_LINE_26 (EXTI_CONFIG | 0x1Au) /*!< External interrupt line 26 Connected to the internal USART2 wakeup event */ +#else +#define EXTI_LINE_26 (EXTI_RESERVED | 0x1Au) +#endif /* EXTI_IMR_MR26 */ + +#if defined (EXTI_IMR_MR27) +#define EXTI_LINE_27 (EXTI_CONFIG | 0x1Bu) /*!< External interrupt line 27 Connected to the internal CEC wakeup event */ +#else +#define EXTI_LINE_27 (EXTI_RESERVED | 0x1Bu) +#endif /* EXTI_IMR_MR27 */ + +#if defined (EXTI_IMR_MR28) +#define EXTI_LINE_28 (EXTI_CONFIG | 0x1Cu) /*!< External interrupt line 28 Connected to the internal USART3 wakeup event */ +#else +#define EXTI_LINE_28 (EXTI_RESERVED | 0x1Cu) +#endif /* EXTI_IMR_MR28 */ + +#define EXTI_LINE_29 (EXTI_RESERVED | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | 0x1Eu) + +#if defined (EXTI_IMR_MR31) +#define EXTI_LINE_31 (EXTI_CONFIG | 0x1Fu) /*!< External interrupt line 31 Connected to the VDDIO2 supply comparator output */ +#else +#define EXTI_LINE_31 (EXTI_RESERVED | 0x1Fu) +#endif /* EXTI_IMR_MR31 */ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#if defined (GPIOD) +#define EXTI_GPIOD 0x00000003u +#endif /* GPIOD */ +#if defined (GPIOE) +#define EXTI_GPIOE 0x00000004u +#endif /* GPIOE */ +#define EXTI_GPIOF 0x00000005u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI bit usage + */ +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#define EXTI_LINE_NB 32uL + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) + +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined (GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF)) +#elif defined (GPIOD) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOF)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOF)) +#endif /* GPIOE */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_EXTI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h new file mode 100644 index 0000000..ecce5da --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h @@ -0,0 +1,353 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of Flash HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_FLASH_H +#define __STM32F0xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */ +/** + * @} + */ + +/** @addtogroup FLASH_Private_Macros + * @{ + */ + +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) + +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0U, + FLASH_PROC_PAGEERASE = 1U, + FLASH_PROC_MASSERASE = 2U, + FLASH_PROC_PROGRAMHALFWORD = 3U, + FLASH_PROC_PROGRAMWORD = 4U, + FLASH_PROC_PROGRAMDOUBLEWORD = 5U +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + + __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */ + + __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ + + __IO uint64_t Data; /*!< Internal variable to save data to be programmed */ + + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + + __IO uint32_t ErrorCode; /*!< FLASH error code + This parameter can be a value of @ref FLASH_Error_Codes */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error_Codes FLASH Error Codes + * @{ + */ + +#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */ +#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */ +#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */ + +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_HALFWORD (0x01U) /*!ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__)) + + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * The value of this parameter depend on device used within the same series + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @} + */ + +/** @defgroup FLASH_Prefetch FLASH Prefetch + * @brief macros to handle FLASH Prefetch buffer + * @{ + */ +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE)) + +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_ERR Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__)) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_BSY FLASH Busy flag + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag + * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32f0xx_hal_flash_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); + +/* FLASH IRQ handler function */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); + +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +uint32_t HAL_FLASH_GetError(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private function -------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h new file mode 100644 index 0000000..a4c79d8 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h @@ -0,0 +1,448 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of Flash HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_FLASH_EX_H +#define __STM32F0xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/** @addtogroup FLASHEx_Private_Macros + * @{ + */ +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \ + ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)) + +#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \ + ((VALUE) == OB_WRPSTATE_ENABLE)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ + ((LEVEL) == OB_RDP_LEVEL_1))/*||\ + ((LEVEL) == OB_RDP_LEVEL_2))*/ + +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) + +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) + +#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET)) + +#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF)) + +#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET)) + +#if defined(FLASH_OBR_BOOT_SEL) +#define IS_OB_BOOT_SEL(BOOT_SEL) (((BOOT_SEL) == OB_BOOT_SEL_RESET) || ((BOOT_SEL) == OB_BOOT_SEL_SET)) +#define IS_OB_BOOT0(BOOT0) (((BOOT0) == OB_BOOT0_RESET) || ((BOOT0) == OB_BOOT0_SET)) +#endif /* FLASH_OBR_BOOT_SEL */ + + +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U)) + +#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= FLASH_BANK1_END) + +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_BANK1_END)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types + * @{ + */ +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled + This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_BANK1_END */ + + uint32_t NbPages; /*!< NbPages: Number of pagess to be erased. + This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/ + +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Options bytes program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< OptionType: Option byte to be configured. + This parameter can be a value of @ref FLASHEx_OB_Type */ + + uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_OB_WRP_State */ + + uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected + This parameter can be a value of @ref FLASHEx_OB_Write_Protection */ + + uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level.. + This parameter can be a value of @ref FLASHEx_OB_Read_Protection */ + + uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: + IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY + This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, + @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1, @ref FLASHEx_OB_VDDA_Analog_Monitoring and + @ref FLASHEx_OB_RAM_Parity_Check_Enable */ + + uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed + This parameter can be a value of @ref FLASHEx_OB_Data_Address */ + + uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ +} FLASH_OBProgramInitTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Page_Size FLASHEx Page Size + * @{ + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) \ + || defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6) +#define FLASH_PAGE_SIZE 0x400U +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) \ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) +#define FLASH_PAGE_SIZE 0x800U +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */ +/** + * @} + */ + +/** @defgroup FLASHEx_Type_Erase FLASH Type Erase + * @{ + */ +#define FLASH_TYPEERASE_PAGES (0x00U) /*!
© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_GPIO_H +#define __STM32F0xx_HAL_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +}GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +}GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @{ + */ +#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */ +/** + * @} + */ + + /** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */ +#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ + ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32f0xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h new file mode 100644 index 0000000..33b27e3 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h @@ -0,0 +1,800 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_GPIO_EX_H +#define __STM32F0xx_HAL_GPIO_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + +#if defined (STM32F030x6) +/*------------------------- STM32F030x6---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F030x6 */ + +/*---------------------------------- STM32F030x8 -------------------------------------------*/ +#if defined (STM32F030x8) +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F030x8 */ + +#if defined (STM32F031x6) || defined (STM32F038xx) +/*--------------------------- STM32F031x6/STM32F038xx ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDAT ((uint8_t)0x00U) /*!< AF0: SWDAT Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F031x6 || STM32F038xx */ + +#if defined (STM32F051x8) || defined (STM32F058xx) +/*--------------------------- STM32F051x8/STM32F058xx---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F051x8/STM32F058xx */ + +#if defined (STM32F071xB) +/*--------------------------- STM32F071xB ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: AEVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: TSC Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F071xB */ + + +#if defined(STM32F091xC) || defined(STM32F098xx) +/*--------------------------- STM32F091xC || STM32F098xx ------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ +#define GPIO_AF0_USART8 ((uint8_t)0x00U) /*!< AF0: USART8 Alternate Function mapping */ +#define GPIO_AF0_CAN ((uint8_t)0x00U) /*!< AF0: CAN Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01U) /*!< AF1: USART4 Alternate Function mapping */ +#define GPIO_AF1_USART5 ((uint8_t)0x01U) /*!< AF1: USART5 Alternate Function mapping */ +#define GPIO_AF1_USART6 ((uint8_t)0x01U) /*!< AF1: USART6 Alternate Function mapping */ +#define GPIO_AF1_USART7 ((uint8_t)0x01U) /*!< AF1: USART7 Alternate Function mapping */ +#define GPIO_AF1_USART8 ((uint8_t)0x01U) /*!< AF1: USART8 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: TSC Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USART5 ((uint8_t)0x02U) /*!< AF2: USART5 Alternate Function mapping */ +#define GPIO_AF2_USART6 ((uint8_t)0x02U) /*!< AF2: USART6 Alternate Function mapping */ +#define GPIO_AF2_USART7 ((uint8_t)0x02U) /*!< AF2: USART7 Alternate Function mapping */ +#define GPIO_AF2_USART8 ((uint8_t)0x02U) /*!< AF2: USART8 Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ +#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ +#define GPIO_AF4_USART5 ((uint8_t)0x04U) /*!< AF4: USART5 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_USART6 ((uint8_t)0x05U) /*!< AF5: USART6 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030xC) +/*--------------------------- STM32F030xC ----------------------------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USART5 ((uint8_t)0x02U) /*!< AF2: USART5 Alternate Function mapping */ +#define GPIO_AF2_USART6 ((uint8_t)0x02U) /*!< AF2: USART6 Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ +#define GPIO_AF4_USART5 ((uint8_t)0x04U) /*!< AF4: USART5 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_USART6 ((uint8_t)0x05U) /*!< AF5: USART6 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F030xC */ + +#if defined (STM32F072xB) || defined (STM32F078xx) +/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ +#define GPIO_AF0_CAN ((uint8_t)0x00U) /*!< AF0: CAN Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ +#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +/* AF 7 */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U) + +#endif /* STM32F072xB || STM32F078xx */ + +#if defined (STM32F070xB) +/*---------------------------------- STM32F070xB ---------------------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ +#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART4 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F070xB */ + +#if defined (STM32F042x6) || defined (STM32F048xx) +/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ +#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */ +#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_I2C1 ((uint8_t)0x05U) /*!< AF5: I2C1 Alternate Function mapping */ +#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_USB ((uint8_t)0x05U) /*!< AF5: USB Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined (STM32F070x6) +/*--------------------------------------- STM32F070x6 ----------------------------------------*/ +/* AF 0 */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */ + +/* AF 1 */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */ + +/* AF 2 */ +#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */ + +/* AF 3 */ +#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */ +#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */ + +/* AF 4 */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */ + +/* AF 5 */ +#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */ +#define GPIO_AF5_I2C1 ((uint8_t)0x05U) /*!< AF5: I2C1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */ +#define GPIO_AF5_USB ((uint8_t)0x05U) /*!< AF5: USB Alternate Function mapping */ + +/* AF 6 */ +#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U) + +#endif /* STM32F070x6 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index +* @{ + */ +#if defined(GPIOD) && defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U : 5U) +#endif + +#if defined(GPIOD) && !defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U : 5U) +#endif + +#if !defined(GPIOD) && defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOE))? 4U : 5U) +#endif + +#if !defined(GPIOD) && !defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U : 5U) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_GPIO_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h new file mode 100644 index 0000000..3df3fc0 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h @@ -0,0 +1,809 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_I2C_H +#define STM32F0xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization + section in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \ + : ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32f0xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32f0xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F0xx_HAL_I2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h new file mode 100644 index 0000000..8679506 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h @@ -0,0 +1,174 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_I2C_EX_H +#define STM32F0xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#if defined(SYSCFG_CFGR1_I2C_FMP_PA9) +#define I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast Mode Plus on PA9 */ +#define I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast Mode Plus on PA10 */ +#else +#define I2C_FASTMODEPLUS_PA9 (uint32_t)(0x00000001U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA9 not supported */ +#define I2C_FASTMODEPLUS_PA10 (uint32_t)(0x00000002U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA10 not supported */ +#endif +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< Enable Fast Mode Plus on PB9 */ +#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1) +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C_FMP_I2C1 /*!< Enable Fast Mode Plus on I2C1 pins */ +#else +#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */ +#endif +#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2) +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C_FMP_I2C2 /*!< Enable Fast Mode Plus on I2C2 pins */ +#else +#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, + uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, + uint32_t DigitalFilter); +#if defined(I2C_CR1_WUPEN) +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +#endif +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ + ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9)) == I2C_FASTMODEPLUS_PA9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2))) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32f0xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_I2C_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h new file mode 100644 index 0000000..e716606 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h @@ -0,0 +1,189 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_PWR_H +#define __STM32F0xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0x00000000U) +#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U) +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U) +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01U) +#define PWR_STOPENTRY_WFE ((uint8_t)0x02U) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macro PWR Exported Macro + * @{ + */ + +/** @brief Check PWR flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event + * was received from the WKUP pin or from the RTC alarm (Alarm A), + * RTC Tamper event, RTC TimeStamp event or RTC Wakeup. + * An additional wakeup event is detected if the WKUP pin is enabled + * (by setting the EWUP bit) when the WKUP pin level is already high. + * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was + * resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled + * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode + * For this reason, this bit is equal to 0 after Standby or reset + * until the PVDE bit is set. + * Warning: this Flag is not available on STM32F030x8 products + * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference + * voltage VREFINT is ready. + * Warning: this Flag is not available on STM32F030x8 products + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the PWR's pending flags. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U) + + +/** + * @} + */ + +/* Include PWR HAL Extension module */ +#include "stm32f0xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_PWR_DeInit(void); + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F0xx_HAL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h new file mode 100644 index 0000000..a9ed6eb --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h @@ -0,0 +1,459 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_PWR_EX_H +#define __STM32F0xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Types PWREx Exported Types + * @{ + */ + +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level + This parameter can be a value of @ref PWREx_PVD_detection_level */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWREx_PVD_Mode */ +}PWR_PVDTypeDef; + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ + + +/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins + * @{ + */ +#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) +#define PWR_WAKEUP_PIN3 ((uint32_t)PWR_CSR_EWUP3) +#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4) +#define PWR_WAKEUP_PIN5 ((uint32_t)PWR_CSR_EWUP5) +#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6) +#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7) +#define PWR_WAKEUP_PIN8 ((uint32_t)PWR_CSR_EWUP8) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN3) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN5) || \ + ((PIN) == PWR_WAKEUP_PIN6) || \ + ((PIN) == PWR_WAKEUP_PIN7) || \ + ((PIN) == PWR_WAKEUP_PIN8)) + +#elif defined(STM32F030xC) || defined (STM32F070xB) +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) +#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4) +#define PWR_WAKEUP_PIN5 ((uint32_t)PWR_CSR_EWUP5) +#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6) +#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN5) || \ + ((PIN) == PWR_WAKEUP_PIN6) || \ + ((PIN) == PWR_WAKEUP_PIN7)) + +#elif defined(STM32F042x6) || defined (STM32F048xx) +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) +#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4) +#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6) +#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7) + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN6) || \ + ((PIN) == PWR_WAKEUP_PIN7)) + +#else +#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) +#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) + + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2)) + +#endif + +/** + * @} + */ + +/** @defgroup PWREx_EXTI_Line PWREx EXTI Line + * @{ + */ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) + +#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) + +#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)EXTI_IMR_MR31) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */ + +#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) ||*/ +/** + * @} + */ + +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +/** @defgroup PWREx_PVD_detection_level PWREx PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) +/** + * @} + */ + +/** @defgroup PWREx_PVD_Mode PWREx PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_NORMAL)) +/** + * @} + */ +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +/** @defgroup PWREx_Flag PWREx Flag + * @{ + */ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) + +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF +#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC) +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF +#else +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Macros PWREx Exported Macros + * @{ + */ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +/** + * @brief Enable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable interrupt on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) + +/** + * @brief Enable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + +/** + * @brief PVD EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_PVD) + +/** + * @brief PVD EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() EXTI->RTSR |= (PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) + +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +/** + * @brief Enable interrupt on Vddio2 Monitor Exti Line 31. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Disable interrupt on Vddio2 Monitor Exti Line 31. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Vddio2 Monitor EXTI line configuration: clear falling edge and rising edge trigger. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE() \ + do{ \ + EXTI->FTSR &= ~(PWR_EXTI_LINE_VDDIO2); \ + EXTI->RTSR &= ~(PWR_EXTI_LINE_VDDIO2); \ + } while(0) + +/** + * @brief Vddio2 Monitor EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_VDDIO2) + +/** + * @brief Check whether the specified VDDIO2 monitor EXTI interrupt flag is set or not. + * @retval EXTI VDDIO2 Monitor Line Status. + */ +#define __HAL_PWR_VDDIO2_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Clear the VDDIO2 Monitor EXTI flag. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_VDDIO2)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2)) + + +#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 + * @{ + */ +/* I/O operation functions ***************************************************/ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +void HAL_PWR_PVD_IRQHandler(void); +void HAL_PWR_PVDCallback(void); +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +void HAL_PWREx_Vddio2Monitor_IRQHandler(void); +void HAL_PWREx_Vddio2MonitorCallback(void); +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/* Peripheral Control functions **********************************************/ +#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F072xB) || \ + defined (STM32F091xC) +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); +#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F072xB) || */ + /* defined (STM32F091xC) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +void HAL_PWREx_EnableVddio2Monitor(void); +void HAL_PWREx_DisableVddio2Monitor(void); +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_PWR_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h new file mode 100644 index 0000000..4239c51 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h @@ -0,0 +1,1686 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_RCC_H +#define __STM32F0xx_HAL_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @addtogroup RCC_Private_Constants + * @{ + */ + +/** @defgroup RCC_Timeout RCC Timeout + * @{ + */ + +/* Disable Backup domain write protection state change timeout */ +#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */ +/* LSE state change timeout */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define HSI14_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#if defined(RCC_HSI48_SUPPORT) +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Register_Offset Register offsets + * @{ + */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +#define RCC_CR_OFFSET 0x00 +#define RCC_CFGR_OFFSET 0x04 +#define RCC_CIR_OFFSET 0x08 +#define RCC_BDCR_OFFSET 0x20 +#define RCC_CSR_OFFSET 0x24 + +/** + * @} + */ + + +/* CR register byte 2 (Bits[23:16]) base address */ +#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U)) + +/* CIR register byte 1 (Bits[15:8]) base address */ +#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U)) + +/* CIR register byte 2 (Bits[23:16]) base address */ +#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U)) + +/* Defines used for Flags */ +#define CR_REG_INDEX ((uint8_t)1U) +#define CR2_REG_INDEX ((uint8_t)2U) +#define BDCR_REG_INDEX ((uint8_t)3U) +#define CSR_REG_INDEX ((uint8_t)4U) + +/* Bits position in in the CFGR register */ +#define RCC_CFGR_PLLMUL_BITNUMBER 18U +#define RCC_CFGR_HPRE_BITNUMBER 4U +#define RCC_CFGR_PPRE_BITNUMBER 8U +/* Flags in the CFGR2 register */ +#define RCC_CFGR2_PREDIV_BITNUMBER 0 +/* Flags in the CR register */ +#define RCC_CR_HSIRDY_BitNumber 1 +#define RCC_CR_HSERDY_BitNumber 17 +#define RCC_CR_PLLRDY_BitNumber 25 +/* Flags in the CR2 register */ +#define RCC_CR2_HSI14RDY_BitNumber 1 +#define RCC_CR2_HSI48RDY_BitNumber 16 +/* Flags in the BDCR register */ +#define RCC_BDCR_LSERDY_BitNumber 1 +/* Flags in the CSR register */ +#define RCC_CSR_LSIRDY_BitNumber 1 +#define RCC_CSR_V18PWRRSTF_BitNumber 23 +#define RCC_CSR_RMVF_BitNumber 24 +#define RCC_CSR_OBLRSTF_BitNumber 25 +#define RCC_CSR_PINRSTF_BitNumber 26 +#define RCC_CSR_PORRSTF_BitNumber 27 +#define RCC_CSR_SFTRSTF_BitNumber 28 +#define RCC_CSR_IWDGRSTF_BitNumber 29 +#define RCC_CSR_WWDGRSTF_BitNumber 30 +#define RCC_CSR_LPWRRSTF_BitNumber 31 +/* Flags in the HSITRIM register */ +#define RCC_CR_HSITRIM_BitNumber 3 +#define RCC_HSI14TRIM_BIT_NUMBER 3 +#define RCC_FLAG_MASK ((uint8_t)0x1FU) + +/** + * @} + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) +#define IS_RCC_HSI14(__HSI14__) (((__HSI14__) == RCC_HSI14_OFF) || ((__HSI14__) == RCC_HSI14_ON) || ((__HSI14__) == RCC_HSI14_ADC_CONTROL)) +#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU) +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) +#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1) || ((__PREDIV__) == RCC_PREDIV_DIV2) || \ + ((__PREDIV__) == RCC_PREDIV_DIV3) || ((__PREDIV__) == RCC_PREDIV_DIV4) || \ + ((__PREDIV__) == RCC_PREDIV_DIV5) || ((__PREDIV__) == RCC_PREDIV_DIV6) || \ + ((__PREDIV__) == RCC_PREDIV_DIV7) || ((__PREDIV__) == RCC_PREDIV_DIV8) || \ + ((__PREDIV__) == RCC_PREDIV_DIV9) || ((__PREDIV__) == RCC_PREDIV_DIV10) || \ + ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12) || \ + ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14) || \ + ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16)) + +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \ + ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ + ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ + ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \ + ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \ + ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \ + ((__MUL__) == RCC_PLL_MUL16)) +#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ + (((__CLK__) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ + (((__CLK__) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)) +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) +#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< PLLState: The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/ + + uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Prediv_Factor */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ + + uint32_t HSI14State; /*!< The new state of the HSI14. + This parameter can be a value of @ref RCC_HSI14_Config */ + + uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + +#if defined(RCC_HSI48_SUPPORT) + uint32_t HSI48State; /*!< The new state of the HSI48. + This parameter can be a value of @ref RCC_HSI48_Config */ + +#endif /* RCC_HSI48_SUPPORT */ + RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ + +#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */ + +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE (0x00000000U) +#define RCC_OSCILLATORTYPE_HSE (0x00000001U) +#define RCC_OSCILLATORTYPE_HSI (0x00000002U) +#define RCC_OSCILLATORTYPE_LSE (0x00000004U) +#define RCC_OSCILLATORTYPE_LSI (0x00000008U) +#define RCC_OSCILLATORTYPE_HSI14 (0x00000010U) +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 (0x00000020U) +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF (0x00000000U) /*!< HSE clock deactivation */ +#define RCC_HSE_ON (0x00000001U) /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (0x00000005U) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF (0x00000000U) /*!< LSE clock deactivation */ +#define RCC_LSE_ON (0x00000001U) /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (0x00000005U) /*!< External clock source for LSE clock */ + +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF (0x00000000U) /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT (0x10U) /* Default HSI calibration trimming value */ + +/** + * @} + */ + +/** @defgroup RCC_HSI14_Config RCC HSI14 Config + * @{ + */ +#define RCC_HSI14_OFF (0x00000000U) +#define RCC_HSI14_ON RCC_CR2_HSI14ON +#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS) + +#define RCC_HSI14CALIBRATION_DEFAULT (0x10U) /* Default HSI14 calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF (0x00000000U) /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF ((uint8_t)0x00U) +#define RCC_HSI48_ON ((uint8_t)0x01U) + +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE (0x00000000U) /*!< PLL is not configured */ +#define RCC_PLL_OFF (0x00000001U) /*!< PLL deactivation */ +#define RCC_PLL_ON (0x00000002U) /*!< PLL activation */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK (0x00000001U) /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK (0x00000002U) /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 (0x00000004U) /*!< PCLK1 to configure */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NO_CLK (0x00000000U) /*!< No clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor + * @{ + */ +#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2 +#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3 +#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4 +#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5 +#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6 +#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7 +#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8 +#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9 +#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10 +#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11 +#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12 +#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13 +#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14 +#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15 +#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16 + +/** + * @} + */ + +/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor + * @{ + */ + +#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1 +#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2 +#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3 +#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4 +#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5 +#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6 +#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7 +#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8 +#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9 +#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10 +#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11 +#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12 +#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13 +#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14 +#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15 +#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16 + +/** + * @} + */ + + +/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK +#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE +#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI + +/** + * @} + */ + +/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK + +/** + * @} + */ +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 (0x00000000U) +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ + +/** + * @} + */ + +/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK +#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI +#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK +#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE +#define RCC_MCO1SOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL +#define RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCO_HSI14 + +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ +#define RCC_IT_HSI14RDY ((uint8_t)RCC_CIR_HSI14RDYF) /*!< HSI14 Ready Interrupt flag */ +#if defined(RCC_CIR_HSI48RDYF) +#define RCC_IT_HSI48RDY ((uint8_t)RCC_CIR_HSI48RDYF) /*!< HSI48 Ready Interrupt flag */ +#endif +#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: CR2 register + * - 011: BDCR register + * - 0100: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_BitNumber)) +#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_BitNumber)) +#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_BitNumber)) +/* Flags in the CR2 register */ +#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI14RDY_BitNumber)) + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_BitNumber)) +#if defined(RCC_CSR_V18PWRRSTF) +#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_V18PWRRSTF_BitNumber)) +#endif +#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_BitNumber)) +#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_BitNumber)) /*!< PIN reset flag */ +#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_BitNumber)) /*!< POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_BitNumber)) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_BitNumber)) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_BitNumber)) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_BitNumber)) /*!< Low-Power reset flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_BitNumber)) /*!< External Low Speed oscillator Ready */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN)) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN)) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN)) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) +#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN)) +#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) +#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET) +#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET) +#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) +#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) +/** + * @} + */ + + +/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) +#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) +#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN)) +#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN)) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) +#define __HAL_RCC_DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) != RESET) +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset + * @brief Force or release AHB peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST)) + +#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST)) +#define __HAL_RCC_DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST)) +#define __HAL_RCC_DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST)) +/** + * @} + */ +/** @defgroup RCC_HSI_Configuration HSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_BitNumber) + +/** + * @} + */ + +/** @defgroup RCC_LSI_Configuration LSI Configuration + * @{ + */ + +/** @brief Macro to enable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +/** @brief Macro to disable the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @} + */ + +/** @defgroup RCC_HSE_Configuration HSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON turn ON the HSE oscillator + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + }while(0U) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. + * @note Predivision factor can not be changed if PLL is used as system clock + * In this case, you have to select another source of the system clock, disable the PLL and + * then change the HSE predivision factor. + * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. + * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16. + */ +#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__)) + +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if ((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if ((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + }while(0U) + +/** + * @} + */ + +/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration + * @{ + */ + +/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14). + * @note After enabling the HSI14 with @ref __HAL_RCC_HSI14_ENABLE(), the application software + * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be + * used as system clock source. This is not necessary if @ref HAL_RCC_OscConfig() is used. + * clock cycles. + */ +#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON) + +/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14). + * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI14 can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI14. + * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON) + +/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. + */ +#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS) + +/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. + */ +#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS) + +/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI14 RC. + * @param __HSI14CALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSI14CALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CALIBRATIONVALUE__) \ + MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CALIBRATIONVALUE__) << RCC_HSI14TRIM_BIT_NUMBER) +/** + * @} + */ + +/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config + * @{ + */ + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * @param __USART1CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW))) + +/** + * @} + */ + +/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config + * @{ + */ + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * @param __I2C1CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW))) +/** + * @} + */ + +/** @defgroup RCC_PLL_Configuration PLL Configuration + * @{ + */ + +/** @brief Macro to enable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to disable the main PLL. + * @note The main PLL can not be disabled if it is used as system clock source + */ +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock + * This parameter can be one of the following values: + * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16. + * @param __PREDIV__ specifies the predivider factor for PLL VCO input clock + * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16. + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__ , __PREDIV__, __PLLMUL__) \ + do { \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSOURCE__))); \ + } while(0U) + + +/** @brief Get oscillator clock selected as PLL input clock + * @retval The clock source used for PLL entry. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) + +/** + * @} + */ + +/** @defgroup RCC_Get_Clock_source Get Clock source + * @{ + */ + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS)) + +/** + * @} + */ + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +#if defined(RCC_CFGR_MCOPRE) +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + @if STM32F042x6 + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F048xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F071xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F072xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F078xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F091xC + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F098xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F030x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F030xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F031x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F038xx + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F070x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F070xB + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @endif + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64 + * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128 + */ +#else +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source + */ +#endif +#if defined(RCC_CFGR_MCOPRE) +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) +#else + +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__)) + +#endif + +/** + * @} + */ + + /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macro to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source, + * the RTC cannot be used in STOP and STANDBY modes. + * @note The system must always be configured so as to get a PCLK frequency greater than or + * equal to the RTCCLK frequency for a proper operation of the RTC. + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + +/** @brief Macro to get the RTC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macro to enable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macro to disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macro to force the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** @brief Macros to release the Backup domain reset. + */ +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt enable + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. + * @arg @ref RCC_FLAG_HSI14RDY HSI14 oscillator clock ready + @if STM32F038xx + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F042x6 + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F048xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F058xx + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F071xB + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F072xB + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F078xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F091xC + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F098xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @endif + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. + * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset + * @arg @ref RCC_FLAG_PINRST Pin reset. + * @arg @ref RCC_FLAG_PORRST POR/PDR reset. + * @arg @ref RCC_FLAG_SFTRST Software reset. + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. + * @arg @ref RCC_FLAG_LPWRRST Low Power reset. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \ + (((__FLAG__) >> 5U) == CR2_REG_INDEX)? RCC->CR2 : \ + (((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK))) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32f0xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h new file mode 100644 index 0000000..e599e97 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h @@ -0,0 +1,2085 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_RCC_EX_H +#define __STM32F0xx_HAL_RCC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)) + +#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSI48)) + +#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI48)) + +#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ + ((SOURCE) == RCC_PLLSOURCE_HSI48) || \ + ((SOURCE) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON)) + +#else + +#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14)) +#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)) +#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ + ((SOURCE) == RCC_PLLSOURCE_HSE)) + +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI14)) + +#elif defined(RCC_CFGR_PLLNODIV) && defined(RCC_CFGR_MCO_HSI48) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI14) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI48)) + +#elif !defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI14)) + +#endif /* RCC_CFGR_PLLNODIV && !RCC_CFGR_MCO_HSI48 */ + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Constants + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) + +/** @addtogroup RCC_PLL_Clock_Source + * @{ + */ +#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV +#define RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV + +/** + * @} + */ + +/** @addtogroup RCC_Interrupt + * @{ + */ +#define RCC_IT_HSI48 RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +/** + * @} + */ + +/** @addtogroup RCC_Flag + * @{ + */ +#define RCC_FLAG_HSI48RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI48RDY_BitNumber)) +/** + * @} + */ + +/** @addtogroup RCC_System_Clock_Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI48 RCC_CFGR_SW_HSI48 +/** + * @} + */ + +/** @addtogroup RCC_System_Clock_Source_Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48 +/** + * @} + */ + +#else +/** @addtogroup RCC_PLL_Clock_Source + * @{ + */ + +#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC) +#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV +#else +#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2 +#endif + +/** + * @} + */ + +#endif /* RCC_HSI48_SUPPORT */ + +/** @addtogroup RCC_MCO_Clock_Source + * @{ + */ + +#if defined(RCC_CFGR_PLLNODIV) + +#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV) + +#endif /* RCC_CFGR_PLLNODIV */ + +#if defined(RCC_CFGR_MCO_HSI48) + +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCO_HSI48 + +#endif /* SRCC_CFGR_MCO_HSI48 */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Private Constants -------------------------------------------------------------*/ +#if defined(CRS) +/** @addtogroup RCCEx_Private_Constants + * @{ + */ + +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)) + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)) + +/** + * @} + */ +#endif /* CRS */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F030xC) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_RTC)) +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || + STM32F030xC */ + +#if defined(STM32F070x6) || defined(STM32F070xB) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB)) +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \ + RCC_PERIPHCLK_USB)) +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined(STM32F051x8) || defined(STM32F058xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC)) +#endif /* STM32F051x8 || STM32F058xx */ + +#if defined(STM32F071xB) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \ + RCC_PERIPHCLK_RTC)) +#endif /* STM32F071xB */ + +#if defined(STM32F072xB) || defined(STM32F078xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB)) +#endif /* STM32F072xB || STM32F078xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USART3 )) +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) + +#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_HSI48) || \ + ((SOURCE) == RCC_USBCLKSOURCE_PLL)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */ + +#if defined(STM32F070x6) || defined(STM32F070xB) + +#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_NONE) || \ + ((SOURCE) == RCC_USBCLKSOURCE_PLL)) + +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_HSI)) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_HSI)) +#endif /* STM32F091xC || STM32F098xx */ + + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_CECCLKSOURCE_LSE)) +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(RCC_CFGR_MCOPRE) + +#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ + ((DIV) == RCC_MCODIV_4) || ((DIV) == RCC_MCODIV_8) || \ + ((DIV) == RCC_MCODIV_16) || ((DIV) == RCC_MCODIV_32) || \ + ((DIV) == RCC_MCODIV_64) || ((DIV) == RCC_MCODIV_128)) +#else + +#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1)) + +#endif /* RCC_CFGR_MCOPRE */ + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +#if defined(CRS) + +#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \ + ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB)) +#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1) || ((_DIV_) == RCC_CRS_SYNC_DIV2) || \ + ((_DIV_) == RCC_CRS_SYNC_DIV4) || ((_DIV_) == RCC_CRS_SYNC_DIV8) || \ + ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \ + ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128)) +#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING)) +#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFFU)) +#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFFU)) +#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3FU)) +#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \ + ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN)) +#endif /* CRS */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F030xC) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || + STM32F030xC */ + +#if defined(STM32F070x6) || defined(STM32F070xB) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined(STM32F051x8) || defined(STM32F058xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F051x8 || STM32F058xx */ + +#if defined(STM32F071xB) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< USART2 clock source + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F071xB */ + +#if defined(STM32F072xB) || defined(STM32F078xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< USART2 clock source + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + + uint32_t UsbClockSelection; /*!< USB clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F072xB || STM32F078xx */ + + +#if defined(STM32F091xC) || defined(STM32F098xx) +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< USART1 clock source + This parameter can be a value of @ref RCC_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< USART2 clock source + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + + uint32_t Usart3ClockSelection; /*!< USART3 clock source + This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< I2C1 clock source + This parameter can be a value of @ref RCC_I2C1_Clock_Source */ + + uint32_t CecClockSelection; /*!< HDMI CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +}RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFFU */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x3FU */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFFU */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +}RCC_CRSSynchroInfoTypeDef; + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection + * @{ + */ +#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F030xC) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_RTC (0x00010000U) + +#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || + STM32F030xC */ + +#if defined(STM32F070x6) || defined(STM32F070xB) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USB (0x00020000U) + +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USB (0x00020000U) + +#endif /* STM32F042x6 || STM32F048xx */ + +#if defined(STM32F051x8) || defined(STM32F058xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) + +#endif /* STM32F051x8 || STM32F058xx */ + +#if defined(STM32F071xB) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_USART2 (0x00000002U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) + +#endif /* STM32F071xB */ + +#if defined(STM32F072xB) || defined(STM32F078xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_USART2 (0x00000002U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USB (0x00020000U) + +#endif /* STM32F072xB || STM32F078xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) +#define RCC_PERIPHCLK_USART1 (0x00000001U) +#define RCC_PERIPHCLK_USART2 (0x00000002U) +#define RCC_PERIPHCLK_I2C1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000400U) +#define RCC_PERIPHCLK_RTC (0x00010000U) +#define RCC_PERIPHCLK_USART3 (0x00040000U) + +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) + +/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source + * @{ + */ +#define RCC_USBCLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48 /*!< HSI48 clock selected as USB clock source */ +#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */ + +/** + * @} + */ + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */ + +#if defined(STM32F070x6) || defined(STM32F070xB) + +/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source + * @{ + */ +#define RCC_USBCLKSOURCE_NONE (0x00000000U) /*!< USB clock disabled */ +#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */ + +/** + * @} + */ + +#endif /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source + * @{ + */ +#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK +#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK +#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE +#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI + +/** + * @} + */ + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source + * @{ + */ +#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK +#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK +#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE +#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI + +/** + * @} + */ + +#endif /* STM32F091xC || STM32F098xx */ + + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source + * @{ + */ +#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244 +#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE + +/** + * @} + */ + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +/** @defgroup RCCEx_MCOx_Clock_Prescaler RCCEx MCOx Clock Prescaler + * @{ + */ + +#if defined(RCC_CFGR_MCOPRE) + +#define RCC_MCODIV_1 (0x00000000U) +#define RCC_MCODIV_2 (0x10000000U) +#define RCC_MCODIV_4 (0x20000000U) +#define RCC_MCODIV_8 (0x30000000U) +#define RCC_MCODIV_16 (0x40000000U) +#define RCC_MCODIV_32 (0x50000000U) +#define RCC_MCODIV_64 (0x60000000U) +#define RCC_MCODIV_128 (0x70000000U) + +#else + +#define RCC_MCODIV_1 (0x00000000U) + +#endif /* RCC_CFGR_MCOPRE */ + +/** + * @} + */ + +/** @defgroup RCCEx_LSEDrive_Configuration RCC LSE Drive Configuration + * @{ + */ + +#define RCC_LSEDRIVE_LOW (0x00000000U) /*!< Xtal mode lower driving capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Status RCCEx CRS Status + * @{ + */ +#define RCC_CRS_NONE (0x00000000U) +#define RCC_CRS_TIMEOUT (0x00000001U) +#define RCC_CRS_SYNCOK (0x00000002U) +#define RCC_CRS_SYNCWARN (0x00000004U) +#define RCC_CRS_SYNCERR (0x00000008U) +#define RCC_CRS_SYNCMISS (0x00000010U) +#define RCC_CRS_TRIMOVF (0x00000020U) + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS Synchronization Source + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO (0x00000000U) /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS Synchronization Divider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 (0x00000000U) /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS Synchronization Polarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING (0x00000000U) /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS Default Reload Value + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT (0x0000BB7FU) /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS Default Error Limit Value + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT (0x00000022U) /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS Default HSI48 Calibration vakye + * @{ + */ +#define RCC_CRS_HSI48CALIBRATION_DEFAULT (0x00000020U) /*!< The default value is 32, which corresponds to the middle of the trimming interval. + The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value + corresponds to a higher output frequency */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS Frequency Error Direction + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP (0x00000000U) /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(GPIOD) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN)) + +#endif /* GPIOD */ + +#if defined(GPIOE) + +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN)) + +#endif /* GPIOE */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TSC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN)) + +#endif /* STM32F091xC || STM32F098xx */ + +/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || STM32F070x6 || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) + +#endif /* STM32F031x6 || STM32F038xx || */ + /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030x8) \ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) + +#endif /* STM32F030x8 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) + +#endif /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN)) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) + +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F072xB || STM32F078xx || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRS_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CRSEN)) + +#endif /* CRS */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/** @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ +#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_USART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN)) +#define __HAL_RCC_USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN)) + +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + + +/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset + * @brief Forces or releases peripheral reset. + * @{ + */ + +/** @brief Force or release AHB peripheral reset. + */ +#if defined(GPIOD) + +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST)) + +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST)) + +#endif /* GPIOD */ + +#if defined(GPIOE) + +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST)) + +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST)) + +#endif /* GPIOE */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST)) + +#define __HAL_RCC_TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +/** @brief Force or release APB1 peripheral reset. + */ +#if defined(STM32F030x8) \ + || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) + +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) + +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) + +#endif /* STM32F031x6 || STM32F038xx || */ + /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030x8) \ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) + +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) + +#endif /* STM32F030x8 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) + +#define __HAL_RCC_DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) + +#endif /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) + +#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_USART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART4RST)) + +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST)) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) + +#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST)) + +#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F072xB || STM32F078xx || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST)) + +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST)) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +#define __HAL_RCC_CRS_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CRSRST)) + +#define __HAL_RCC_CRS_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CRSRST)) + +#endif /* CRS */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST)) + +#define __HAL_RCC_USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + + +/** @brief Force or release APB2 peripheral reset. + */ +#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST)) + +#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST)) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) + +#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST)) +#define __HAL_RCC_USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST)) + +#define __HAL_RCC_USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST)) +#define __HAL_RCC_USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST)) + +#endif /* STM32F091xC || STM32F098xx */ + +/** + * @} + */ + +/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +/** @brief AHB Peripheral Clock Enable Disable Status + */ +#if defined(GPIOD) + +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET) + +#endif /* GPIOD */ + +#if defined(GPIOE) + +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET) + +#endif /* GPIOE */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TSC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) != RESET) +#define __HAL_RCC_TSC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx */ + +/** @brief APB1 Peripheral Clock Enable Disable Status + */ +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || STM32F070x6 || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F030x8)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F031x6) || defined(STM32F038xx)\ + || defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) + +#endif /* STM32F031x6 || STM32F038xx || */ + /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F030x8) \ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) + +#endif /* STM32F030x8 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_DAC1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) != RESET) +#define __HAL_RCC_DAC1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) == RESET) + +#endif /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_USART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_USART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) == RESET) + +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) + +#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET) +#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F072xB || STM32F078xx || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) + +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(CRS) + +#define __HAL_RCC_CRS_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) != RESET) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) == RESET) + +#endif /* CRS */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) != RESET) +#define __HAL_RCC_USART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +/** @brief APB1 Peripheral Clock Enable Disable Status + */ +#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\ + || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET) + +#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */ + /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) + +#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx || STM32F030xC */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + +#define __HAL_RCC_USART7_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) != RESET) +#define __HAL_RCC_USART8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) != RESET) +#define __HAL_RCC_USART7_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) == RESET) +#define __HAL_RCC_USART8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) == RESET) + +#endif /* STM32F091xC || STM32F098xx */ +/** + * @} + */ + + +/** @defgroup RCCEx_HSI48_Enable_Disable RCCEx HSI48 Enable Disable + * @brief Macros to enable or disable the Internal 48Mhz High Speed oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI48 can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI14. + * @note After enabling the HSI48 with __HAL_RCC_HSI48_ENABLE(), the application software + * should wait on HSI48RDY flag to be set indicating that HSI48 clock is stable and can be + * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used. + * @note When the HSI48 is stopped, HSI48RDY flag goes low after 6 HSI48 oscillator + * clock cycles. + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) + +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI48ON) +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON) + +/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_HSI48_ON HSI48 enabled + * @arg @ref RCC_HSI48_OFF HSI48 disabled + */ +#define __HAL_RCC_GET_HSI48_STATE() \ + (((uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48ON)) != RESET) ? RCC_HSI48_ON : RCC_HSI48_OFF) + +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config + * @{ + */ +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F070x6) || defined(STM32F070xB) + +/** @brief Macro to configure the USB clock (USBCLK). + * @param __USBCLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: +@if STM32F070xB +@elseif STM32F070x6 +@else + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock +@endif + * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock + */ +#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, (uint32_t)(__USBCLKSOURCE__)) + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: +@if STM32F070xB +@elseif STM32F070x6 +@else + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock +@endif + * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW))) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F072xB || STM32F078xx || */ + /* STM32F070x6 || STM32F070xB */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + +/** @brief Macro to configure the CEC clock. + * @param __CECCLKSOURCE__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_CEC_CONFIG(__CECCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSOURCE__)) + +/** @brief Macro to get the HDMI CEC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW))) + +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || defined(STM32F098xx) */ + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) +/** @brief Macro to configure the USART2 clock (USART2CLK). + * @param __USART2CLKSOURCE__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG(__USART2CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSOURCE__)) + +/** @brief Macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW))) +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/ + +#if defined(STM32F091xC) || defined(STM32F098xx) +/** @brief Macro to configure the USART3 clock (USART3CLK). + * @param __USART3CLKSOURCE__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG(__USART3CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSOURCE__)) + +/** @brief Macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW))) + +#endif /* STM32F091xC || STM32F098xx */ +/** + * @} + */ + +/** @defgroup RCCEx_LSE_Configuration LSE Drive Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->BDCR,\ + RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) )) + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_IT_And_Flag RCCEx IT and Flag + * @{ + */ +/* Interrupt & Flag management */ + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != RESET) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != RESET) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0U) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != RESET) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0U) + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after prescaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +#if defined(CRS) + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_RCC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h new file mode 100644 index 0000000..0f57c73 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h @@ -0,0 +1,2125 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_TIM_H +#define STM32F0xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode + This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode + This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + uint32_t LockLevel; /*!< TIM Lock level + This parameter can be a value of @ref TIM_Lock_level */ + uint32_t DeadTime; /*!< TIM dead Time + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint32_t BreakState; /*!< TIM Break State + This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + uint32_t BreakPolarity; /*!< TIM Break input polarity + This parameter can be a value of @ref TIM_Break_Polarity */ + uint32_t BreakFilter; /*!< Specifies the break input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event + (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder +mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__HANDLE__)->Instance->CCR4)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + (__HANDLE__)->ChannelState[3]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32f0xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h new file mode 100644 index 0000000..23f6642 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h @@ -0,0 +1,268 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_TIM_EX_H +#define STM32F0xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM14_GPIO (0x00000000U) /*!< TIM14 TI1 is connected to GPIO */ +#define TIM_TIM14_RTC (0x00000001U) /*!< TIM14 TI1 is connected to RTC_clock */ +#define TIM_TIM14_HSE (0x00000002U) /*!< TIM14 TI1 is connected to HSE/32U */ +#define TIM_TIM14_MCO (0x00000003U) /*!< TIM14 TI1 is connected to MCO */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__INSTANCE__, __REMAP__) \ + (((__INSTANCE__) == TIM14) && (((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F0xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h new file mode 100644 index 0000000..2344a5d --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h @@ -0,0 +1,1595 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_UART_H +#define STM32F0xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ck) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ck) / ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ck) / ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck is the UART input clock */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * It is expected to admit following values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ +#if defined(USART_CR1_UESM) + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ +#endif /* USART_CR1_UESM */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ +#if defined(USART_CR1_UESM) + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ +#endif /* USART_CR1_UESM */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#if defined(USART_CR1_UESM) +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#endif /* USART_CR1_UESM */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE /*!< UART transmit data register empty */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE /*!< UART read data register not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#if defined(USART_CR1_UESM) +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#endif /* USART_CR1_UESM */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#if defined(USART_CR1_UESM) +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#endif /* USART_CR1_UESM */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag +#if defined(USART_CR1_UESM) + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag +#endif + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + #if defined(USART_CR1_UESM) + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + #endif + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: +#if defined(USART_CR1_UESM) + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt +#endif + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: +#if defined(USART_CR1_UESM) + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt +#endif + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: +#if defined(USART_CR1_UESM) + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt +#endif + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: +#if defined(USART_CR1_UESM) + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt +#endif + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + #if defined(USART_CR1_UESM) + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag +#endif + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ + + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__)) + + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6000001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +#if defined(USART_CR1_UESM) +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +#endif /* USART_CR1_UESM */ +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) +#if defined(USART_CR1_UESM) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) +#endif /* USART_CR1_UESM */ + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32f0xx_hal_uart_ex.h" + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +#if defined(USART_CR2_LINEN) +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +#endif /* USART_CR2_LINEN */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +#if defined(USART_CR2_LINEN) +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +#endif /* USART_CR2_LINEN */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_UART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h new file mode 100644 index 0000000..127f13f --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h @@ -0,0 +1,591 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_UART_EX_H +#define STM32F0xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +#if defined(USART_CR1_UESM) +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +#endif /* USART_CR1_UESM */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#if defined(USART_CR1_M1) +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#endif /* USART_CR1_M1 */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#if defined (USART_CR1_M0) +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +#else +#define UART_WORDLENGTH_9B USART_CR1_M /*!< 9-bit long UART frame */ +#endif /* USART_CR1_M0 */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +#if defined(USART_CR1_UESM) +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +#endif /* USART_CR1_UESM */ +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +#if defined(USART_CR1_UESM) +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +#endif/* USART_CR1_UESM */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ + +#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } while(0) +#elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F051x8) || defined (STM32F058xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F070xB) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F091xC) || defined (STM32F098xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART7) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART8) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F030xC) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) + +#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */ + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#if defined (USART_CR1_M1) +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +#else +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +#endif /* USART_CR1_M1 */ + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#if defined (USART_CR1_M1) +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) +#else +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) +#endif /* USART_CR1_M1 */ + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_UART_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c new file mode 100644 index 0000000..94a482a --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c @@ -0,0 +1,514 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs categories: + (+) HAL Initialization and de-initialization functions + (+) HAL Control functions + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief STM32F0xx HAL Driver version number V1.7.5 + */ +#define __STM32F0xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F0xx_HAL_VERSION_SUB1 (0x07) /*!< [23:16] sub1 version */ +#define __STM32F0xx_HAL_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */ +#define __STM32F0xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F0xx_HAL_VERSION ((__STM32F0xx_HAL_VERSION_MAIN << 24U)\ + |(__STM32F0xx_HAL_VERSION_SUB1 << 16U)\ + |(__STM32F0xx_HAL_VERSION_SUB2 << 8U )\ + |(__STM32F0xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK (0x00000FFFU) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface, the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed + and the backup domain when enabled. + (+) de-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __Weak + to make override possible in case of other implementations in user file. + +@endverbatim + * @{ + */ + +/** + * @brief This function configures the Flash prefetch, + * Configures time base source, NVIC and Low level hardware + * @note This function is called at the beginning of program after reset and before + * the clock configuration + * @note The time base configuration is based on HSI clock when exiting from Reset. + * Once done, time base tick start incrementing. + * In the default implementation,Systick is used as source of time base. + * The tick variable is incremented each 1ms in its ISR. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + + HAL_InitTick(TICK_INT_PRIORITY); + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initialize common part of the HAL and stops the SysTick + * of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __Weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) + { + return HAL_ERROR; + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during Sleep mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note ThiS function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) + +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief This method returns the HAL revision + * @retval version 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32F0xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> 16U); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c new file mode 100644 index 0000000..cbe3f5b --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c @@ -0,0 +1,341 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M0 exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + -@- Negative value of IRQn_Type are not allowed. + + + [..] + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x03). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined + inside the stm32f0xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number . + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to stm32f0xx.h file) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 3. + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * with stm32f0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0 based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn,PreemptPriority); +} + +/** + * @brief Enables a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disables a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiates a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK) functionalities. + + +@endverbatim + * @{ + */ + + +/** + * @brief Gets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn) +{ + /* Get priority for Cortex-M system or device specific interrupts */ + return NVIC_GetPriority(IRQn); +} + +/** + * @brief Sets Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Gets Pending Interrupt (reads the pending register in the NVIC + * and returns the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clears the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Configures the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief This function handles SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c new file mode 100644 index 0000000..b7f91a4 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c @@ -0,0 +1,901 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to Reference manual for connection between peripherals + and DMA requests . + + (#) For a given Channel, program the required configuration through the following parameters: + Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode, + using HAL_DMA_Init() function. + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_Channel_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of DMA handle structure). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp = 0U; + + /* Check the DMA handle allocation */ + if(NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + + /* Initialize DmaBaseAddress and ChannelIndex parameters used + by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ + DMA_CalcBaseAndBitshift(hdma); + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if(NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Reset DMA Channel Number of Data to Transfer register */ + hdma->Instance->CNDTR = 0U; + + /* Reset DMA Channel peripheral address register */ + hdma->Instance->CPAR = 0U; + + /* Reset DMA Channel memory address register */ + hdma->Instance->CMAR = 0U; + +/* Get DMA Base Address */ + DMA_CalcBaseAndBitshift(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Reset the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Reset the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief I/O operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + hdma->Instance->CCR |= DMA_CCR_EN; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete, & transfer error interrupts */ + /* Half transfer interrupt is optional: enable it only if associated callback is available */ + if(NULL != hdma->XferHalfCpltCallback ) + { + hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + } + else + { + hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_TE); + hdma->Instance->CCR &= ~DMA_IT_HT; + } + + /* Enable the Peripheral */ + hdma->Instance->CCR |= DMA_CCR_EN; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + if(hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + + /* Disable the channel */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex); + } + /* Change the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Abort the DMA Transfer in Interrupt mode. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + + /* Disable DMA IT */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + + /* Disable the channel */ + hdma->Instance->CCR &= ~DMA_CCR_EN; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart = 0U; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC)) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << hdma->ChannelIndex; + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << hdma->ChannelIndex; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(RESET == (hdma->DmaBaseAddress->ISR & temp)) + { + if(RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State= HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + if(HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex; + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if ((RESET != (flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_HT))) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + hdma->Instance->CCR &= ~DMA_IT_HT; + } + + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex; + + /* DMA peripheral state is not updated in Half Transfer */ + /* State is updated only in Transfer Complete case */ + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((RESET != (flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TC))) + { + if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete & transfer error interrupts */ + /* if the DMA mode is not CIRCULAR */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_TE); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management ***************************************/ + else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Then, disable all DMA interrupts */ + hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex; + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } +} + +/** + * @brief Register callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifer + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Returns the DMA state. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + return hdma->State; +} + +/** + * @brief Return the DMA error code + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Set the DMA Transfer parameters. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @brief set the DMA base address and channel index depending on DMA instance + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) +{ +#if defined (DMA2) + /* calculation of the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + /* calculation of the channel index */ + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; +#endif +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @} + */ + + /** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c new file mode 100644 index 0000000..1adb8f7 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c @@ -0,0 +1,559 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two different + interrupts pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + EXTI->RTSR |= maskline; + } + else + { + EXTI->RTSR &= ~maskline; + } + + /* Configure falling trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + EXTI->FTSR |= maskline; + } + else + { + EXTI->FTSR &= ~maskline; + } + + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + EXTI->IMR |= maskline; + } + else + { + EXTI->IMR &= ~maskline; + } + + /* Configure event mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + EXTI->EMR |= maskline; + } + else + { + EXTI->EMR &= ~maskline; + } + + return HAL_OK; +} + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + + /* Check if selected line is enable */ + if ((EXTI->IMR & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + /* Check if selected line is enable */ + if ((EXTI->EMR & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + /* Check if configuration of selected line is enable */ + if ((EXTI->RTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + } + + /* Get falling configuration */ + /* Check if configuration of selected line is enable */ + if ((EXTI->FTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); + } + else + { + pExtiConfig->GPIOSel = 0x00u; + } + } + else + { + /* No Trigger selected */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + } + + return HAL_OK; +} + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + EXTI->IMR = (EXTI->IMR & ~maskline); + + /* 2] Clear event mode */ + EXTI->EMR = (EXTI->EMR & ~maskline); + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + EXTI->RTSR = (EXTI->RTSR & ~maskline); + EXTI->FTSR = (EXTI->FTSR & ~maskline); + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t maskline; + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending bit */ + regval = (EXTI->PR & maskline); + if (regval != 0x00u) + { + /* Clear pending bit */ + EXTI->PR = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* return 1 if bit is set else 0 */ + regval = ((EXTI->PR & maskline) >> linepos); + return regval; +} + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Clear Pending bit */ + EXTI->PR = maskline; +} + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Generate Software interrupt */ + EXTI->SWIER = maskline; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c new file mode 100644 index 0000000..94ad6e9 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c @@ -0,0 +1,694 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Prefetch on I-Code + (+) Option Bytes programming + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32F0xx devices. + + (#) FLASH Memory I/O Programming functions: this group includes all needed + functions to erase and program the main memory: + (++) Lock and Unlock the FLASH interface + (++) Erase function: Erase page, erase all pages + (++) Program functions: half word, word and doubleword + (#) FLASH Option Bytes Programming functions: this group includes all needed + functions to manage the Option Bytes: + (++) Lock and Unlock the Option Bytes + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Launch the Option Bytes loader + (++) Erase Option Bytes + (++) Program the data Option Bytes + (++) Get the Write protection. + (++) Get the user option bytes. + + (#) Interrupts and flags management functions : this group + includes all needed functions to: + (++) Handle FLASH interrupts + (++) Wait for last FLASH operation according to its status + (++) Get error flag status + + [..] In addition to these function, this driver includes a set of macros allowing + to handle the following operations: + + (+) Set/Get the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro ---------------------------- ---------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); +static void FLASH_SetErrorCode(void); +extern void FLASH_PageErase(uint32_t PageAddress); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim +@endverbatim + * @{ + */ + +/** + * @brief Program halfword, word or double word at a specified address + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @note FLASH should be previously erased before new programming (only exception to this + * is when 0x0000 is programmed) + * + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifie the address to be programmed. + * @param Data Specifie the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint8_t index = 0U; + uint8_t nbiterations = 0U; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + /* Program halfword (16-bit) at a specified address. */ + nbiterations = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /* Program word (32-bit = 2*16-bit) at a specified address. */ + nbiterations = 2U; + } + else + { + /* Program double word (64-bit = 4*16-bit) at a specified address. */ + nbiterations = 4U; + } + + for (index = 0U; index < nbiterations; index++) + { + FLASH_Program_HalfWord((Address + (2U*index)), (uint16_t)(Data >> (16U*index))); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); + /* In case of error, stop programming procedure */ + if (status != HAL_OK) + { + break; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program halfword, word or double word at a specified address with interrupt enabled. + * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifie the address to be programmed. + * @param Data Specifie the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + pFlash.Address = Address; + pFlash.Data = Data; + + if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD; + /* Program halfword (16-bit) at a specified address. */ + pFlash.DataRemaining = 1U; + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD; + /* Program word (32-bit : 2*16-bit) at a specified address. */ + pFlash.DataRemaining = 2U; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD; + /* Program double word (64-bit : 4*16-bit) at a specified address. */ + pFlash.DataRemaining = 4U; + } + + /* Program halfword (16-bit) at a specified address. */ + FLASH_Program_HalfWord(Address, (uint16_t)Data); + + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t addresstmp = 0U; + + /* Check FLASH operation error flags */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + /* Return the faulty address */ + addresstmp = pFlash.Address; + /* Reset address */ + pFlash.Address = 0xFFFFFFFFU; + + /* Save the Error code */ + FLASH_SetErrorCode(); + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(addresstmp); + + /* Stop the procedure ongoing */ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + + /* Process can continue only if no error detected */ + if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still pages to erase */ + if(pFlash.DataRemaining != 0U) + { + addresstmp = pFlash.Address; + /*Indicate user which sector has been erased */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + + /*Increment sector number*/ + addresstmp = pFlash.Address + FLASH_PAGE_SIZE; + pFlash.Address = addresstmp; + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + FLASH_PageErase(addresstmp); + } + else + { + /* No more pages to Erase, user callback can be called. */ + /* Reset Sector and stop Erase pages procedure */ + pFlash.Address = addresstmp = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + } + } + else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /* Operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(0); + + /* Stop Mass Erase procedure*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + else + { + /* Nb of 16-bit data to program can be decreased */ + pFlash.DataRemaining--; + + /* Check if there are still 16-bit data to program */ + if(pFlash.DataRemaining != 0U) + { + /* Increment address to 16-bit */ + pFlash.Address += 2; + addresstmp = pFlash.Address; + + /* Shift to have next 16-bit data */ + pFlash.Data = (pFlash.Data >> 16U); + + /* Operation is completed, disable the PG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG); + + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); + } + else + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2U); + } + else + { + HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6U); + } + + /* Reset Address and stop Program procedure */ + pFlash.Address = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + } + } + + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { + /* Operation is completed, disable the PG, PER and MER Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); + + /* Disable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which has been erased + * (if 0xFFFFFFFF, it means that all the selected pages have been erased) + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * - Mass Erase: No return value expected + * - Pages Erase: Address of the page which returned an error + * - Program: Address which was selected for data program + * @retval none + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* Verify Flash is unlocked */ + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Locks the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE)) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE); + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @note This function will reset automatically the MCU. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the OBL_Launch bit to launch the option byte loading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* Wait for last operation to be completed */ + return(FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE)); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions + * @brief Peripheral errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be: + * @ref FLASH_Error_Codes + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Program a half-word (16-bit) at a specified address. + * @param Address specify the address to be programmed. + * @param Data specify the data to be programmed. + * @retval None + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Proceed to program the new data */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Write data in the address */ + *(__IO uint16_t*)Address = Data; +} + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) + { + if (Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || + __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* There is no error flag set */ + return HAL_OK; +} + + +/** + * @brief Set the specific FLASH error flag. + * @retval None + */ +static void FLASH_SetErrorCode(void) +{ + uint32_t flags = 0U; + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; + flags |= FLASH_FLAG_WRPERR; + } + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG; + flags |= FLASH_FLAG_PGERR; + } + /* Clear FLASH error pending bits */ + __HAL_FLASH_CLEAR_FLAG(flags); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c new file mode 100644 index 0000000..7c30632 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c @@ -0,0 +1,984 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the FLASH peripheral: + * + Extended Initialization/de-initialization functions + * + Extended I/O operation functions + * + Extended Peripheral Control functions + * + @verbatim + ============================================================================== + ##### Flash peripheral extended features ##### + ============================================================================== + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32F0xxx devices. It includes + + (++) Set/Reset the write protection + (++) Program the user Option Bytes + (++) Get the Read protection Level + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ +#ifdef HAL_FLASH_MODULE_ENABLED + +/** @addtogroup FLASH + * @{ + */ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +/* Variables used for Erase pages under interruption*/ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_POSITION_IWDGSW_BIT 8U +#define FLASH_POSITION_OB_USERDATA0_BIT 16U +#define FLASH_POSITION_OB_USERDATA1_BIT 24U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +/* Erase operations */ +static void FLASH_MassErase(void); +void FLASH_PageErase(uint32_t PageAddress); + +/* Option bytes control */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage); +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig); +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data); +static uint32_t FLASH_OB_GetWRP(void); +static uint32_t FLASH_OB_GetRDP(void); +static uint8_t FLASH_OB_GetUser(void); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions + * @brief FLASH Memory Erasing functions + * +@verbatim + ============================================================================== + ##### FLASH Erasing Programming functions ##### + ============================================================================== + + [..] The FLASH Memory Erasing functions, includes the following functions: + (+) @ref HAL_FLASHEx_Erase: return only when erase has been done + (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback + is called with parameter 0xFFFFFFFF + + [..] Any operation of erase should follow these steps: + (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and + program memory access. + (#) Call the desired function to erase page. + (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access + (recommended to protect the FLASH memory against possible unwanted operation). + +@endverbatim + * @{ + */ + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] PageError pointer to variable that + * contains the configuration information on faulty page in case of error + * (0xFFFFFFFF means that all the pages have been correctly erased) + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t address = 0U; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass Erase requested for Bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Mass erase to be done*/ + FLASH_MassErase(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the MER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_MER); + } + } + else + { + /* Page Erase is requested */ + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + + /* Page Erase requested on address located on bank1 */ + /* Wait for last operation to be completed */ + if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + /* Erase page by page to be done*/ + for(address = pEraseInit->PageAddress; + address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress); + address += FLASH_PAGE_SIZE) + { + FLASH_PageErase(address); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = address; + break; + } + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled + * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function + * must be called before. + * Call the @ref HAL_FLASH_Lock() to disable the flash memory access + * (recommended to protect the FLASH memory against possible unwanted operation) + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* If procedure already ongoing, reject the next one */ + if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Enable End of FLASH Operation and Error source interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; + FLASH_MassErase(); + } + else + { + /* Erase by page to be done*/ + + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); + assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); + + pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE; + pFlash.DataRemaining = pEraseInit->NbPages; + pFlash.Address = pEraseInit->PageAddress; + + /*Erase 1st page and wait for IT*/ + FLASH_PageErase(pEraseInit->PageAddress); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions + * @brief Option Bytes Programming functions + * +@verbatim + ============================================================================== + ##### Option Bytes Programming functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + option bytes operations. + +@endverbatim + * @{ + */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_FLASHEx_OBErase(void) +{ + uint8_t rdptmp = OB_RDP_LEVEL_0; + HAL_StatusTypeDef status = HAL_ERROR; + + /* Get the actual read protection Option Byte value */ + rdptmp = FLASH_OB_GetRDP(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Restore the last read protection Option Byte value */ + status = FLASH_OB_RDP_LevelConfig(rdptmp); + } + } + + /* Return the erase status */ + return status; +} + +/** + * @brief Program option bytes + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Write protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /* Enable of Write protection on the selected page */ + status = FLASH_OB_EnableWRP(pOBInit->WRPPage); + } + else + { + /* Disable of Write protection on the selected page */ + status = FLASH_OB_DisableWRP(pOBInit->WRPPage); + } + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) + { + status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* USER configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) + { + status = FLASH_OB_UserConfig(pOBInit->USERConfig); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* DATA configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA) + { + status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData); + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + return status; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER; + + /*Get WRP*/ + pOBInit->WRPPage = FLASH_OB_GetWRP(); + + /*Get RDP Level*/ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /*Get USER*/ + pOBInit->USERConfig = FLASH_OB_GetUser(); +} + +/** + * @brief Get the Option byte user data + * @param DATAAdress Address of the option byte DATA + * This parameter can be one of the following values: + * @arg @ref OB_DATA_ADDRESS_DATA0 + * @arg @ref OB_DATA_ADDRESS_DATA1 + * @retval Value programmed in USER data + */ +uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress) +{ + uint32_t value = 0U; + + if (DATAAdress == OB_DATA_ADDRESS_DATA0) + { + /* Get value programmed in OB USER Data0 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT; + } + else + { + /* Get value programmed in OB USER Data1 */ + value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT; + } + + return value; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Full erase of FLASH memory Bank + * + * @retval None + */ +static void FLASH_MassErase(void) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Only bank1 will be erased*/ + SET_BIT(FLASH->CR, FLASH_CR_MER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @brief Enable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write protected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFFU; +#if defined(OB_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFFU; +#endif /* OB_WRP1_WRP1 */ +#if defined(OB_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFFU; +#endif /* OB_WRP2_WRP2 */ +#if defined(OB_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFFU; +#endif /* OB_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be protected ******/ + WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage)); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES48TO63MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES48TO63MASK */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + /* Enable write protection */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(OB_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 &= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP0_WRP0 */ + +#if defined(OB_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 &= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP1_WRP1 */ + +#if defined(OB_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 &= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP2_WRP2 */ + +#if defined(OB_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 &= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Disable the write protection of the desired pages + * @note An option byte erase is done automatically in this function. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash page i if + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * + * @param WriteProtectPage specifies the page(s) to be write unprotected. + * The value of this parameter depend on device used within the same series + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage) +{ + HAL_StatusTypeDef status = HAL_OK; + uint16_t WRP0_Data = 0xFFFFU; +#if defined(OB_WRP1_WRP1) + uint16_t WRP1_Data = 0xFFFFU; +#endif /* OB_WRP1_WRP1 */ +#if defined(OB_WRP2_WRP2) + uint16_t WRP2_Data = 0xFFFFU; +#endif /* OB_WRP2_WRP2 */ +#if defined(OB_WRP3_WRP3) + uint16_t WRP3_Data = 0xFFFFU; +#endif /* OB_WRP3_WRP3 */ + + /* Check the parameters */ + assert_param(IS_OB_WRP(WriteProtectPage)); + + /* Get current write protected pages and the new pages to be unprotected ******/ + WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage); + +#if defined(OB_WRP_PAGES0TO15MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); +#elif defined(OB_WRP_PAGES0TO31MASK) + WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); +#endif /* OB_WRP_PAGES0TO31MASK */ + +#if defined(OB_WRP_PAGES16TO31MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U); +#elif defined(OB_WRP_PAGES32TO63MASK) + WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U); +#endif /* OB_WRP_PAGES32TO63MASK */ + +#if defined(OB_WRP_PAGES32TO47MASK) + WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U); +#endif /* OB_WRP_PAGES32TO47MASK */ + +#if defined(OB_WRP_PAGES48TO63MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24U); +#elif defined(OB_WRP_PAGES48TO127MASK) + WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); +#endif /* OB_WRP_PAGES48TO63MASK */ + + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* To be able to write again option byte, need to perform a option byte erase */ + status = HAL_FLASHEx_OBErase(); + if (status == HAL_OK) + { + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(OB_WRP0_WRP0) + if(WRP0_Data != 0xFFU) + { + OB->WRP0 &= WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP0_WRP0 */ + +#if defined(OB_WRP1_WRP1) + if((status == HAL_OK) && (WRP1_Data != 0xFFU)) + { + OB->WRP1 &= WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP1_WRP1 */ + +#if defined(OB_WRP2_WRP2) + if((status == HAL_OK) && (WRP2_Data != 0xFFU)) + { + OB->WRP2 &= WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP2_WRP2 */ + +#if defined(OB_WRP3_WRP3) + if((status == HAL_OK) && (WRP3_Data != 0xFFU)) + { + OB->WRP3 &= WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } +#endif /* OB_WRP3_WRP3 */ + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + return status; +} + +/** + * @brief Set the read protection level. + * @param ReadProtectLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + * @note Warning: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* If the previous operation is completed, proceed to erase the option bytes */ + SET_BIT(FLASH->CR, FLASH_CR_OPTER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the OPTER Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); + + if(status == HAL_OK) + { + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + + WRITE_REG(OB->RDP, ReadProtectLevel); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + } + + return status; +} + +/** + * @brief Program the FLASH User Option Byte. + * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param UserConfig The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4), + * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6). + * For few devices, following option bytes are available: nBOOT0(Bit3) & BOOT_SEL(Bit7). + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW))); + assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST))); + assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST))); + assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET))); + assert_param(IS_OB_VDDA_ANALOG((UserConfig&OB_VDDA_ANALOG_ON))); + assert_param(IS_OB_SRAM_PARITY((UserConfig&OB_SRAM_PARITY_RESET))); +#if defined(FLASH_OBR_BOOT_SEL) + assert_param(IS_OB_BOOT_SEL((UserConfig&OB_BOOT_SEL_SET))); + assert_param(IS_OB_BOOT0((UserConfig&OB_BOOT0_SET))); +#endif /* FLASH_OBR_BOOT_SEL */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enable the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + +#if defined(FLASH_OBR_BOOT_SEL) + OB->USER = UserConfig; +#else + OB->USER = (UserConfig | 0x88U); +#endif + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + + return status; +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface + * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes + * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes + * (system reset will occur) + * Programming of the OB should be performed only after an erase (otherwise PGERR occurs) + * @param Address specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data specifies the data to be programmed. + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enables the Option Bytes Programming operation */ + SET_BIT(FLASH->CR, FLASH_CR_OPTPG); + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the OPTPG Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @retval The FLASH Write Protection Option Bytes value + */ +static uint32_t FLASH_OB_GetWRP(void) +{ + /* Return the FLASH write protection Register value */ + return (uint32_t)(READ_REG(FLASH->WRPR)); +} + +/** + * @brief Returns the FLASH Read Protection level. + * @retval FLASH RDP level + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t tmp_reg; + + /* Read RDP level bits */ + tmp_reg = READ_BIT(FLASH->OBR, (FLASH_OBR_RDPRT1 | FLASH_OBR_RDPRT2)); + + if (tmp_reg == 0U) + { + return OB_RDP_LEVEL_0; + } + else if ((tmp_reg & FLASH_OBR_RDPRT2) == FLASH_OBR_RDPRT2) + { + return OB_RDP_LEVEL_2; + } + else + { + return OB_RDP_LEVEL_1; + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4), + * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6). + * For few devices, following option bytes are available: nBOOT0(Bit3) & BOOT_SEL(Bit7). + */ +static uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Erase the specified FLASH memory page + * @param PageAddress FLASH page to erase + * The value of this parameter depend on device used within the same series + * + * @retval None + */ +void FLASH_PageErase(uint32_t PageAddress) +{ + /* Clean the error context */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Proceed to erase the page */ + SET_BIT(FLASH->CR, FLASH_CR_PER); + WRITE_REG(FLASH->AR, PageAddress); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c new file mode 100644 index 0000000..2c43ff5 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c @@ -0,0 +1,543 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 28 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function : __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) HAL_GPIO_DeInit allows to set register values to their reset value. It's also + recommended to use it to unconfigure pin which was used as an external interrupt + or in event mode. That's the only way to reset corresponding bit in EXTI & SYSCFG + registers. + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PF0 and PF1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..] + * which may be out of array bounds [..,UNKNOWN] in following APIs: + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup GPIO_Private_Defines GPIO Private Defines + * @{ + */ +#define GPIO_MODE (0x00000003U) +#define EXTI_MODE (0x10000000U) +#define GPIO_MODE_IT (0x00010000U) +#define GPIO_MODE_EVT (0x00020000U) +#define RISING_EDGE (0x00100000U) +#define FALLING_EDGE (0x00200000U) +#define GPIO_OUTPUT_TYPE (0x00000010U) + +#define GPIO_NUMBER (16U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT_0 << position) ; + temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position); + GPIOx->OTYPER = temp; + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u)); + temp |= ((GPIO_Init->Pull) << (position * 2u)); + GPIOx->PUPDR = temp; + + /* In case of Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODER0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << (4u * (position & 0x03u))); + temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); + SYSCFG->EXTICR[position >> 2u] = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->IMR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + temp |= iocurrent; + } + EXTI->IMR = temp; + + temp = EXTI->EMR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + temp |= iocurrent; + } + EXTI->EMR = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + temp |= iocurrent; + } + EXTI->RTSR = temp; + + temp = EXTI->FTSR; + temp &= ~(iocurrent); + if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + temp |= iocurrent; + } + EXTI->FTSR = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = SYSCFG->EXTICR[position >> 2u]; + tmp &= (0x0FuL << (4u * (position & 0x03u))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~((uint32_t)iocurrent); + EXTI->EMR &= ~((uint32_t)iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR &= ~((uint32_t)iocurrent); + EXTI->FTSR &= ~((uint32_t)iocurrent); + + /* Configure the External Interrupt or event for the current IO */ + tmp = 0x0FuL << (4u * (position & 0x03u)); + SYSCFG->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO Direction in Input Floating Mode */ + GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((uint32_t)(position & 0x07u) * 4u)) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u)); + + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; + } + +/** + * @brief Set or clear the selected data port bit. + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the pin to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Ouput Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Locks GPIO Pins configuration registers. +* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, +* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. +* @note The configuration of the locked GPIO pins can no longer be modified +* until the next reset. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family + * @param GPIO_Pin specifies the port bits to be locked. +* This parameter can be any combination of GPIO_Pin_x where x can be (0..15). +* @retval None +*/ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + SET_BIT(tmp, GPIO_Pin); + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c new file mode 100644 index 0000000..3523403 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c @@ -0,0 +1,6646 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition, an then permit a call the same master sequential interface + several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT() + or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential + interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() + or using @ref HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT() + or using @ref HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can + add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). + (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT() + or using @ref HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT() + or using @ref HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + @ref HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + @ref HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + @ref HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + @ref HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback(). + [..] + Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit() + or @ref HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SlaveAddr_SHIFT 7U +#define SlaveAddr_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + hi2c->Instance->CR2 = (I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Normal use case for Transmitter mode */ + /* A NACK is generated to confirm the end of transfer */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + return HAL_ERROR; + } + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (I2C_Trials == Trials) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +/** + * @brief This function handles I2C Communication Timeout. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + return HAL_OK; + } + else + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles Acknowledge failed detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Wait until STOP Flag is reset */ + /* AutoEnd should be initiate after AF */ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ + (hi2c->XferISR == I2C_Slave_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK, and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c new file mode 100644 index 0000000..a1e3f60 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c @@ -0,0 +1,333 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32F0xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + (+) Configure Wake Up Feature + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#if defined(I2C_CR1_WUPEN) + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c new file mode 100644 index 0000000..558d869 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c @@ -0,0 +1,454 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization function + * + Peripheral Control function + * + @verbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + After reset, the backup domain (RTC registers, RTC backup data + registers) is protected against possible unwanted + write accesses. + To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() macro. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @brief Enables access to the backup domain (RTC registers, RTC + * backup data registers when present). + * @note If the HSE divided by 32 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + PWR->CR |= (uint32_t)PWR_CR_DBP; +} + +/** + * @brief Disables access to the backup domain (RTC registers, RTC + * backup data registers when present). + * @note If the HSE divided by 32 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + PWR->CR &= ~((uint32_t)PWR_CR_DBP); +} + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is + forced in input pull down configuration and is active on rising edges. + (+) There are two WakeUp pins, and up to eight Wakeup pins on STM32F07x & STM32F09x devices. + (++)WakeUp Pin 1 on PA.00. + (++)WakeUp Pin 2 on PC.13. + (++)WakeUp Pin 3 on PE.06.(STM32F07x/STM32F09x) + (++)WakeUp Pin 4 on PA.02.(STM32F07x/STM32F09x) + (++)WakeUp Pin 5 on PC.05.(STM32F07x/STM32F09x) + (++)WakeUp Pin 6 on PB.05.(STM32F07x/STM32F09x) + (++)WakeUp Pin 7 on PB.15.(STM32F07x/STM32F09x) + (++)WakeUp Pin 8 on PF.02.(STM32F07x/STM32F09x) + + *** Low Power modes configuration *** + ===================================== + [..] + The devices feature 3 low-power modes: + (+) Sleep mode: Cortex-M0 core stopped, peripherals kept running. + (+) Stop mode: all clocks are stopped, regulator running, regulator + in low power mode + (+) Standby mode: 1.2V domain powered off (mode not available on STM32F0x8 devices). + + *** Sleep mode *** + ================== + [..] + (+) Entry: + The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx) + functions with + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + + (+) Exit: + (++) Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + + *** Stop mode *** + ================= + [..] + In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI, + and the HSE RC oscillators are disabled. Internal SRAM and register contents + are preserved. + The voltage regulator can be configured either in normal or low-power mode. + To minimize the consumption. + + (+) Entry: + The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI ) + function with: + (++) Main regulator ON. + (++) Low Power regulator ON. + (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction + (+) Exit: + (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + (++) Some specific communication peripherals (CEC, USART, I2C) interrupts, + when programmed in wakeup mode (the peripheral must be + programmed in wakeup mode and the corresponding interrupt vector + must be enabled in the NVIC) + + *** Standby mode *** + ==================== + [..] + The Standby mode allows to achieve the lowest power consumption. It is based + on the Cortex-M0 deep sleep mode, with the voltage regulator disabled. + The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and + the HSE oscillator are also switched off. SRAM and register contents are lost + except for the RTC registers, RTC backup registers and Standby circuitry. + The voltage regulator is OFF. + + (+) Entry: + (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. + (+) Exit: + (++) WKUP pin rising edge, RTC alarm (Alarm A), RTC wakeup, + tamper event, time-stamp event, external reset in NRST pin, IWDG reset. + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC + Wakeup event, a tamper event, a time-stamp event, or a comparator event, + without depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop and Standby modes + + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to + configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to configure the RTC to detect the tamper or time stamp event using the + HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions. + + (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to + configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() function. + + (+) Comparator auto-wakeup (AWU) from the Stop mode + + (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to: + (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for comparator 2) + to be sensitive to to the selected edges (falling, rising or falling + and rising) (Interrupt or Event modes) using the EXTI_Init() function. + (+++) Configure the comparator to generate the event. +@endverbatim + * @{ + */ + +/** + * @brief Enables the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to enable. + * This parameter can be value of : + * @ref PWREx_WakeUp_Pins + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Enable the EWUPx pin */ + SET_BIT(PWR->CSR, WakeUpPinx); +} + +/** + * @brief Disables the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. + * This parameter can be values of : + * @ref PWREx_WakeUp_Pins + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + /* Disable the EWUPx pin */ + CLEAR_BIT(PWR->CSR, WakeUpPinx); +} + +/** + * @brief Enters Sleep mode. + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * @param Regulator Specifies the regulator state in SLEEP mode. + * On STM32F0 devices, this parameter is a dummy value and it is ignored + * as regulator can't be modified in this mode. Parameter is kept for platform + * compatibility. + * @param SLEEPEntry Specifies if SLEEP mode is entered with WFI or WFE instruction. + * When WFI entry is used, tick interrupt have to be disabled if not desired as + * the interrupt wake up source. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + +/** + * @brief Enters STOP mode. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * @param Regulator Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON + * @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON + * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction + * @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg = PWR->CR; + + /* Clear PDDS and LPDS bits */ + tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS); + + /* Set LPDS bit according to Regulator value */ + tmpreg |= Regulator; + + /* Store the new value */ + PWR->CR = tmpreg; + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* Select STOP mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Enters STANDBY mode. + * @note In Standby mode, all I/O pins are high impedance except for: + * - Reset pad (still available) + * - RTC alternate function pins if configured for tamper, time-stamp, RTC + * Alarm out, or RTC clock calibration out. + * - WKUP pins if enabled. + * STM32F0x8 devices, the Stop mode is available, but it is + * aningless to distinguish between voltage regulator in Low power + * mode and voltage regulator in Run mode because the regulator + * not used and the core is supplied directly from an external source. + * Consequently, the Standby mode is not available on those devices. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Select STANDBY mode */ + PWR->CR |= (uint32_t)PWR_CR_PDDS; + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + + +/** + * @brief Enables CORTEX M4 SEVONPEND bit. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disables CORTEX M4 SEVONPEND bit. + * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c new file mode 100644 index 0000000..c14370b --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c @@ -0,0 +1,274 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWREx HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWREx_Private_Constants PWREx Private Constants + * @{ + */ +#define PVD_MODE_IT (0x00010000U) +#define PVD_MODE_EVT (0x00020000U) +#define PVD_RISING_EDGE (0x00000001U) +#define PVD_FALLING_EDGE (0x00000002U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions + * @brief Extended Peripheral Control functions + * +@verbatim + + =============================================================================== + ##### Peripheral extended control functions ##### + =============================================================================== + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). + (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line16 and can generate an interrupt if enabled. This is done through + HAL_PWR_ConfigPVD(), HAL_PWR_EnablePVD() functions. + (+) The PVD is stopped in Standby mode. + -@- PVD is not available on STM32F030x4/x6/x8 + + *** VDDIO2 Monitor Configuration *** + ==================================== + [..] + (+) VDDIO2 monitor is used to monitor the VDDIO2 power supply by comparing it + to VREFInt Voltage + (+) This monitor is internally connected to the EXTI line31 + and can generate an interrupt if enabled. This is done through + HAL_PWREx_EnableVddio2Monitor() function. + -@- VDDIO2 is available on STM32F07x/09x/04x + +@endverbatim + * @{ + */ + +#if defined (STM32F031x6) || defined (STM32F051x8) || \ + defined (STM32F071xB) || defined (STM32F091xC) || \ + defined (STM32F042x6) || defined (STM32F072xB) +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration + * information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @retval None + */ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } +} + +/** + * @brief Enables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + PWR->CR |= (uint32_t)PWR_CR_PVDE; +} + +/** + * @brief Disables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + PWR->CR &= ~((uint32_t)PWR_CR_PVDE); +} + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler() or PVD_VDDIO2_IRQHandler(). + * @retval None + */ +void HAL_PWR_PVD_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PWR Exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); + } +} + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PWR_PVDCallback could be implemented in the user file + */ +} + +#endif /* defined (STM32F031x6) || defined (STM32F051x8) || */ + /* defined (STM32F071xB) || defined (STM32F091xC) || */ + /* defined (STM32F042x6) || defined (STM32F072xB) */ + +#if defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) +/** + * @brief Enable VDDIO2 monitor: enable Exti 31 and falling edge detection. + * @note If Exti 31 is enable correlty and VDDIO2 voltage goes below Vrefint, + an interrupt is generated Irq line 1. + NVIS has to be enable by user. + * @retval None + */ +void HAL_PWREx_EnableVddio2Monitor(void) +{ + __HAL_PWR_VDDIO2_EXTI_ENABLE_IT(); + __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE(); +} + +/** + * @brief Disable the Vddio2 Monitor. + * @retval None + */ +void HAL_PWREx_DisableVddio2Monitor(void) +{ + __HAL_PWR_VDDIO2_EXTI_DISABLE_IT(); + __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE(); + +} + +/** + * @brief This function handles the PWR Vddio2 monitor interrupt request. + * @note This API should be called under the VDDIO2_IRQHandler() PVD_VDDIO2_IRQHandler(). + * @retval None + */ +void HAL_PWREx_Vddio2Monitor_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_VDDIO2_EXTI_GET_FLAG() != RESET) + { + /* PWR Vddio2 monitor interrupt user callback */ + HAL_PWREx_Vddio2MonitorCallback(); + + /* Clear PWR Exti pending bit */ + __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG(); + } +} + +/** + * @brief PWR Vddio2 Monitor interrupt callback + * @retval None + */ +__weak void HAL_PWREx_Vddio2MonitorCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PWREx_Vddio2MonitorCallback could be implemented in the user file + */ +} + +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ + defined (STM32F091xC) || defined (STM32F098xx) */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c new file mode 100644 index 0000000..fbe2bf5 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c @@ -0,0 +1,1365 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is disabled, + and all peripherals are off except internal SRAM, Flash and JTAG. + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in input floating state, except the JTAG pins which + are assigned to be used for debug purpose. + [..] Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals whose clocks are not + derived from the System clock (RTC, ADC, I2C, USART, TIM, USB FS, etc..) + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC +* @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, HSI14, HSI48, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, + AHB and APB1). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + The HSI clock can be used also to clock the USART and I2C peripherals. + + (#) HSI14 (high-speed internal), 14 MHz factory-trimmed RC used directly to clock + the ADC peripheral. + + (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL (clocked by HSI, HSI48 or HSE), featuring different output clocks: + (++) The first output is used to generate the high speed system clock (up to 48 MHz) + (++) The second output is used to generate the clock for the USB FS (48 MHz) + (++) The third output may be used to generate the clock for the TIM, I2C and USART + peripherals (up to 48 MHz) + + (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() + and if a HSE clock failure occurs(HSE used directly or through PLL as System + clock source), the System clocks automatically switched to HSI and an interrupt + is generated if enabled. The interrupt is linked to the Cortex-M0 NMI + (Non-Maskable Interrupt) exception vector. + + (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL + clock (divided by 2) output on pin (such as PA8 pin). + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) clock is derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + (#) All the peripheral clocks are derived from the System clock (SYSCLK) except: + (++) The FLASH program/erase clock which is always HSI 8MHz clock. + (++) The USB 48 MHz clock which is derived from the PLL VCO clock. + (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE. + (++) The I2C clock which can be derived as well from HSI 8MHz clock. + (++) The ADC clock which is derived from PLL output. + (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC + (HSE divided by a programmable prescaler). The System clock (SYSCLK) + frequency must be higher or equal to the RTC clock frequency. + (++) IWDG clock which is always the LSI clock. + + (#) For the STM32F0xx devices, the maximum frequency of the SYSCLK, HCLK and PCLK1 is 48 MHz, + Depending on the SYSCLK frequency, the flash latency should be adapted accordingly. + + (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and + prefetch is disabled. + @endverbatim + * @{ + */ + +/* + Additional consideration on the SYSCLK based on Latency settings: + +-----------------------------------------------+ + | Latency | SYSCLK clock frequency (MHz) | + |---------------|-------------------------------| + |0WS(1CPU cycle)| 0 < SYSCLK <= 24 | + |---------------|-------------------------------| + |1WS(2CPU cycle)| 24 < SYSCLK <= 48 | + +-----------------------------------------------+ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE and PLL OFF + * - AHB, APB1 prescaler set to 1. + * - CSS and MCO1 OFF + * - All interrupts disabled + * - All interrupt and reset flags cleared + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Set HSION bit, HSITRIM[4:0] bits to the reset value*/ + SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0] and MCOSEL[2:0] bits */ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE | RCC_CFGR_MCO); + + /* Wait till HSI as SYSCLK status is enabled */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Update the SystemCoreClock global variable for HSI as system clock source */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Reset HSEON, CSSON, PLLON bits */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON); + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Get start tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLLRDY is cleared */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Reset CFGR2 register */ + CLEAR_REG(RCC->CFGR2); + + /* Reset CFGR3 register */ + CLEAR_REG(RCC->CFGR3); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIR); + + /* Clear all reset flags */ + __HAL_RCC_CLEAR_RESET_FLAGS(); + + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t pll_config; + uint32_t pll_config2; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI))) + { + /* When HSI is used as system clock it will not disabled */ + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*----------------------------- HSI14 Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue)); + + /* Check the HSI14 State */ + if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON) + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET) + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + } + else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL) + { + /* Enable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_ENABLE(); + + /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */ + __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue); + } + else + { + /* Disable ADC control of the Internal High Speed oscillator HSI14 */ + __HAL_RCC_HSI14ADC_DISABLE(); + + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI14_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET) + { + if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + +#if defined(RCC_HSI48_SUPPORT) + /*----------------------------- HSI48 Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* When the HSI48 is used as system clock it is not allowed to be disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI48) || + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI48))) + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET) && (RCC_OscInitStruct->HSI48State != RCC_HSI48_ON)) + { + return HAL_ERROR; + } + } + else + { + /* Check the HSI48 State */ + if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + { + /* Enable the Internal High Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal High Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } +#endif /* RCC_HSI48_SUPPORT */ + + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); + assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, predivider and multiplication factor. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PREDIV, + RCC_OscInitStruct->PLL.PLLMUL); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->CFGR; + pll_config2 = RCC->CFGR2; + if((READ_BIT(pll_config, RCC_CFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV) || + (READ_BIT(pll_config, RCC_CFGR_PLLMUL) != RCC_OscInitStruct->PLL.PLLMUL)) + { + return HAL_ERROR; + } + } + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * The value of this parameter depend on device used within the same series + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + return HAL_ERROR; + } + } +#if defined(RCC_CFGR_SWS_HSI48) + /* HSI48 is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48) + { + /* Check the HSI48 ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET) + { + return HAL_ERROR; + } + } +#endif /* RCC_CFGR_SWS_HSI48 */ + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + return HAL_ERROR; + } + } + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER]; + + /* Configure the source of time base considering new system clocks settings*/ + HAL_InitTick (TICK_INT_PRIORITY); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * + @verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + + @endverbatim + * @{ + */ + +#if defined(RCC_CFGR_MCOPRE) +/** + * @brief Selects the clock source to output on MCO pin. + * @note MCO pin should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + @if STM32F042x6 + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F048xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F071xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F072xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F078xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F091xC + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F098xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F030x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F030xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F031x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F038xx + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F070x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elif STM32F070xB + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @endif + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param RCC_MCODiv specifies the MCO DIV. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock + * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock + * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock + * @retval None + */ +#else +/** + * @brief Selects the clock source to output on MCO pin. + * @note MCO pin should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param RCC_MCODiv specifies the MCO DIV. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @retval None + */ +#endif +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef gpio; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* Configure the MCO1 pin in alternate function mode */ + gpio.Mode = GPIO_MODE_AF_PP; + gpio.Speed = GPIO_SPEED_FREQ_HIGH; + gpio.Pull = GPIO_NOPULL; + gpio.Pin = MCO1_PIN; + gpio.Alternate = GPIO_AF0_MCO; + + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + + HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio); + + /* Configure the MCO clock source */ + __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv); +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0 NMI (Non-Maskable Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Returns the SYSCLK frequency + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) + * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE + * divided by PREDIV factor(**) or depending on STM32F0xxxx devices either a value based + * on HSI_VALUE divided by 2 or HSI_VALUE divided by PREDIV factor(*) multiplied by the + * PLL factor. + * @note (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + const uint8_t aPLLMULFactorTable[16] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U, + 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U}; + const uint8_t aPredivFactorTable[16] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U, + 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U}; + + uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U; + uint32_t sysclockfreq = 0U; + + tmpreg = RCC->CFGR; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (tmpreg & RCC_CFGR_SWS) + { + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ + { + sysclockfreq = HSE_VALUE; + break; + } + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ + { + pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER]; + prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER]; + if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSE_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); + } +#if defined(RCC_CFGR_PLLSRC_HSI48_PREDIV) + else if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSI48) + { + /* HSI48 used as PLL clock source : PLLCLK = HSI48/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSI48_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); + } +#endif /* RCC_CFGR_PLLSRC_HSI48_PREDIV */ + else + { +#if (defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)) + /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */ + pllclk = (uint32_t)((uint64_t) HSI_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul); +#else + /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ + pllclk = (uint32_t)((uint64_t) (HSI_VALUE >> 1U) * ((uint64_t) pllmul)); +#endif + } + sysclockfreq = pllclk; + break; + } +#if defined(RCC_CFGR_SWS_HSI48) + case RCC_SYSCLKSOURCE_STATUS_HSI48: /* HSI48 used as system clock source */ + { + sysclockfreq = HSI48_VALUE; + break; + } +#endif /* RCC_CFGR_SWS_HSI48 */ + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: /* HSI used as system clock */ + { + sysclockfreq = HSI_VALUE; + break; + } + } + return sysclockfreq; +} + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE) >> RCC_CFGR_PPRE_BITNUMBER]); +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \ + | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI14; +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType |= RCC_OSCILLATORTYPE_HSI48; +#endif /* RCC_HSI48_SUPPORT */ + + + /* Get the HSE configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_BitNumber); + + /* Get the LSE configuration -----------------------------------------------*/ + if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + /* Get the HSI14 configuration -----------------------------------------------*/ + if((RCC->CR2 & RCC_CR2_HSI14ON) == RCC_CR2_HSI14ON) + { + RCC_OscInitStruct->HSI14State = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSI14State = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSI14CalibrationValue = (uint32_t)((RCC->CR2 & RCC_CR2_HSI14TRIM) >> RCC_HSI14TRIM_BIT_NUMBER); + +#if defined(RCC_HSI48_SUPPORT) + /* Get the HSI48 configuration if any-----------------------------------------*/ + RCC_OscInitStruct->HSI48State = __HAL_RCC_GET_HSI48_STATE(); +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the PLL configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL); + RCC_OscInitStruct->PLL.PREDIV = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV); +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * contains the current clock configuration. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != NULL); + assert_param(pFLatency != NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE); + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = __HAL_FLASH_GET_LATENCY(); +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if(__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c new file mode 100644 index 0000000..7771bce --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c @@ -0,0 +1,964 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + Extended Clock Recovery System Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/** @defgroup RCCEx RCCEx + * @brief RCC Extension HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(CRS) +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +/* Bit position in register */ +#define CRS_CFGR_FELIM_BITNUMBER 16 +#define CRS_CR_TRIM_BITNUMBER 8 +#define CRS_ISR_FECAP_BITNUMBER 16 +/** + * @} + */ +#endif /* CRS */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) are set to their reset values. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks + * (USART, RTC, I2C, CEC and USB). + * + * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t temp_reg = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*---------------------------- RTC configuration -------------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + FlagStatus pwrclkchanged = RESET; + + /* As soon as function is called to change RTC clock source, activation of the + power domain is done. */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = temp_reg; + + /* Wait for LSERDY if LSE was enabled */ + if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON)) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + + /* Require to disable power clock if necessary */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*------------------------------- USART1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + /*----------------------------- USART2 Configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + /*----------------------------- USART3 Configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } +#endif /* STM32F091xC || STM32F098xx */ + + /*------------------------------ I2C1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6) + /*------------------------------ USB Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + } +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + /*------------------------------ CEC clock Configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + + return HAL_OK; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks + * (USART, RTC, I2C, CEC and USB). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + /* Common part first */ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC; + /* Get the RTC configuration --------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + /* Get the USART1 clock configuration --------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); + +#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART2; + /* Get the USART2 clock source ---------------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); +#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F091xC) || defined(STM32F098xx) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART3; + /* Get the USART3 clock source ---------------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); +#endif /* STM32F091xC || STM32F098xx */ + +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; + /* Get the USB clock source ---------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */ + +#if defined(STM32F042x6) || defined(STM32F048xx)\ + || defined(STM32F051x8) || defined(STM32F058xx)\ + || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\ + || defined(STM32F091xC) || defined(STM32F098xx) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC; + /* Get the CEC clock source ------------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); +#endif /* STM32F042x6 || STM32F048xx || */ + /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || STM32F098xx */ + +} + +/** + * @brief Returns the peripheral clock frequency + * @note Returns 0 if peripheral clock is unknown + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + @if STM32F042x6 + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F048xx + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F051x8 + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F058xx + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F070x6 + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F070xB + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + @endif + @if STM32F071xB + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F072xB + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F078xx + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F091xC + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + @if STM32F098xx + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART2 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock + @endif + * @retval Frequency in Hz (0: means that no available frequency for the peripheral) + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + /* frequency == 0 : means that no available frequency for the peripheral */ + uint32_t frequency = 0U; + + uint32_t srcclk = 0U; +#if defined(USB) + uint32_t pllmull = 0U, pllsource = 0U, predivfactor = 0U; +#endif /* USB */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + switch (PeriphClk) + { + case RCC_PERIPHCLK_RTC: + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + /* Check if LSE is ready and if RTC clock selection is LSE */ + if ((srcclk == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready and if RTC clock selection is LSI */ + else if ((srcclk == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) + { + frequency = LSI_VALUE; + } + /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/ + else if ((srcclk == RCC_RTCCLKSOURCE_HSE_DIV32) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY))) + { + frequency = HSE_VALUE / 32U; + } + break; + } + case RCC_PERIPHCLK_USART1: + { + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + /* Check if USART1 clock selection is PCLK1 */ + if (srcclk == RCC_USART1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + /* Check if HSI is ready and if USART1 clock selection is HSI */ + else if ((srcclk == RCC_USART1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if USART1 clock selection is SYSCLK */ + else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + /* Check if LSE is ready and if USART1 clock selection is LSE */ + else if ((srcclk == RCC_USART1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#if defined(RCC_CFGR3_USART2SW) + case RCC_PERIPHCLK_USART2: + { + /* Get the current USART2 source */ + srcclk = __HAL_RCC_GET_USART2_SOURCE(); + + /* Check if USART2 clock selection is PCLK1 */ + if (srcclk == RCC_USART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + /* Check if HSI is ready and if USART2 clock selection is HSI */ + else if ((srcclk == RCC_USART2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if USART2 clock selection is SYSCLK */ + else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + /* Check if LSE is ready and if USART2 clock selection is LSE */ + else if ((srcclk == RCC_USART2CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#endif /* RCC_CFGR3_USART2SW */ +#if defined(RCC_CFGR3_USART3SW) + case RCC_PERIPHCLK_USART3: + { + /* Get the current USART3 source */ + srcclk = __HAL_RCC_GET_USART3_SOURCE(); + + /* Check if USART3 clock selection is PCLK1 */ + if (srcclk == RCC_USART3CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + /* Check if HSI is ready and if USART3 clock selection is HSI */ + else if ((srcclk == RCC_USART3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if USART3 clock selection is SYSCLK */ + else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + /* Check if LSE is ready and if USART3 clock selection is LSE */ + else if ((srcclk == RCC_USART3CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#endif /* RCC_CFGR3_USART3SW */ + case RCC_PERIPHCLK_I2C1: + { + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + /* Check if HSI is ready and if I2C1 clock selection is HSI */ + if ((srcclk == RCC_I2C1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if I2C1 clock selection is SYSCLK */ + else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + break; + } +#if defined(USB) + case RCC_PERIPHCLK_USB: + { + /* Get the current USB source */ + srcclk = __HAL_RCC_GET_USB_SOURCE(); + + /* Check if PLL is ready and if USB clock selection is PLL */ + if ((srcclk == RCC_USBCLKSOURCE_PLL) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))) + { + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMUL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = (pllmull >> RCC_CFGR_PLLMUL_BITNUMBER) + 2U; + predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1U; + + if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV) + { + /* HSE used as PLL clock source : frequency = HSE/PREDIV * PLLMUL */ + frequency = (HSE_VALUE/predivfactor) * pllmull; + } +#if defined(RCC_CR2_HSI48ON) + else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV) + { + /* HSI48 used as PLL clock source : frequency = HSI48/PREDIV * PLLMUL */ + frequency = (HSI48_VALUE / predivfactor) * pllmull; + } +#endif /* RCC_CR2_HSI48ON */ + else + { +#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F072xB) || defined(STM32F070xB) + /* HSI used as PLL clock source : frequency = HSI/PREDIV * PLLMUL */ + frequency = (HSI_VALUE / predivfactor) * pllmull; +#else + /* HSI used as PLL clock source : frequency = HSI/2U * PLLMUL */ + frequency = (HSI_VALUE >> 1U) * pllmull; +#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB */ + } + } +#if defined(RCC_CR2_HSI48ON) + /* Check if HSI48 is ready and if USB clock selection is HSI48 */ + else if ((srcclk == RCC_USBCLKSOURCE_HSI48) && (HAL_IS_BIT_SET(RCC->CR2, RCC_CR2_HSI48RDY))) + { + frequency = HSI48_VALUE; + } +#endif /* RCC_CR2_HSI48ON */ + break; + } +#endif /* USB */ +#if defined(CEC) + case RCC_PERIPHCLK_CEC: + { + /* Get the current CEC source */ + srcclk = __HAL_RCC_GET_CEC_SOURCE(); + + /* Check if HSI is ready and if CEC clock selection is HSI */ + if ((srcclk == RCC_CECCLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) + { + frequency = HSI_VALUE; + } + /* Check if LSE is ready and if CEC clock selection is LSE */ + else if ((srcclk == RCC_CECCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) + { + frequency = LSE_VALUE; + } + break; + } +#endif /* CEC */ + default: + { + break; + } + } + return(frequency); +} + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function @ref HAL_RCCEx_CRSConfig which + (+++) Reset CRS registers to their default values. + (+++) Configure CRS registers with synchronization configuration + (+++) Enable automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function @ref HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + @ref HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (RCC_IRQn/RCC_IRQHandler) + (++) Call function @ref HAL_RCCEx_CRSConfig() + (++) Enable RCC_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (@ref __HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) @ref HAL_RCCEx_CRS_SyncOkCallback() + (+++) @ref HAL_RCCEx_CRS_SyncWarnCallback() + (+++) @ref HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) @ref HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function @ref HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling @ref HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_BITNUMBER); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_BITNUMBER)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_BITNUMBER); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_BITNUMBER); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** +* @brief Wait for CRS Synchronization status. +* @param Timeout Duration of the timeout +* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization +* frequency. +* @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. +* @retval Combination of Synchronization status +* This parameter can be a combination of the following values: +* @arg @ref RCC_CRS_TIMEOUT +* @arg @ref RCC_CRS_SYNCOK +* @arg @ref RCC_CRS_SYNCWARN +* @arg @ref RCC_CRS_SYNCERR +* @arg @ref RCC_CRS_SYNCMISS +* @arg @ref RCC_CRS_TRIMOVF +*/ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart = 0U; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } while(RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if(((itflags & RCC_CRS_FLAG_SYNCOK) != RESET) && ((itsources & RCC_CRS_IT_SYNCOK) != RESET)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if(((itflags & RCC_CRS_FLAG_SYNCWARN) != RESET) && ((itsources & RCC_CRS_IT_SYNCWARN) != RESET)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if(((itflags & RCC_CRS_FLAG_ESYNC) != RESET) && ((itsources & RCC_CRS_IT_ESYNC) != RESET)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if(((itflags & RCC_CRS_FLAG_ERR) != RESET) && ((itsources & RCC_CRS_IT_ERR) != RESET)) + { + if((itflags & RCC_CRS_FLAG_SYNCERR) != RESET) + { + crserror |= RCC_CRS_SYNCERR; + } + if((itflags & RCC_CRS_FLAG_SYNCMISS) != RESET) + { + crserror |= RCC_CRS_SYNCMISS; + } + if((itflags & RCC_CRS_FLAG_TRIMOVF) != RESET) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c new file mode 100644 index 0000000..4ecd84b --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c @@ -0,0 +1,7433 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_TIM_RegisterCallback() to register a callback. + @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_ALL: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + default: + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + default: + break; + } + + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK are relevant only for timer instances + * supporting a break input. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + case TIM_CLEARINPUTSOURCE_OCREFCLR: + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + } + break; + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + break; + } + + default: + break; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */ + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */ + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */ + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */ + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */ + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */ + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */ + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */ + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */ + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + break; + } + return HAL_OK; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */ +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c new file mode 100644 index 0000000..fe9102a --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c @@ -0,0 +1,2308 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM14, the parameter can have the following values: + * @arg TIM_TIM14_GPIO: TIM14 TI1 is connected to GPIO + * @arg TIM_TIM14_RTC: TIM14 TI1 is connected to RTC_clock + * @arg TIM_TIM14_HSE: TIM14 TI1 is connected to HSE/32 + * @arg TIM_TIM14_MCO: TIM14 TI1 is connected to MCO + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + __HAL_LOCK(htim); + + /* Check parameters */ + assert_param(IS_TIM_REMAP(htim->Instance, Remap)); + + /* Set the Timer remapping configuration */ + WRITE_REG(htim->Instance->OR, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c new file mode 100644 index 0000000..d9a0b1d --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c @@ -0,0 +1,4102 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_UART_RegisterCallback() to register a user callback. + Function @ref HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_UART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively @ref HAL_UART_RegisterRxEventCallback() , @ref HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_UART_Init() + and @ref HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_UART_Init() and @ref HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_UART_RegisterCallback() before calling @ref HAL_UART_DeInit() + or @ref HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8 )) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN (if LIN is supported) and CLKEN bits in the USART_CR2 register, + - SCEN (if Smartcard is supported), HDSEL and IREN (if IrDA is supported) bits in the USART_CR3 register.*/ +#if defined (USART_CR2_LINEN) + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#else + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); +#endif /* USART_CR2_LINEN */ +#if defined (USART_CR3_SCEN) +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#endif /* USART_CR3_IREN */ +#else +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(huart->Instance->CR3, USART_CR3_HDSEL); +#endif /* USART_CR3_IREN*/ +#endif /* USART_CR3_SCEN */ + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN (if LIN is supported) and CLKEN bits in the USART_CR2 register, + - SCEN (if Smartcard is supported) and IREN (if IrDA is supported) bits in the USART_CR3 register.*/ +#if defined (USART_CR2_LINEN) + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#else + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); +#endif /* USART_CR2_LINEN */ +#if defined (USART_CR3_SCEN) +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); +#else + CLEAR_BIT(huart->Instance->CR3, USART_CR3_SCEN); +#endif /* USART_CR3_IREN */ +#else +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, USART_CR3_IREN); +#endif /* USART_CR3_IREN */ +#endif /* USART_CR3_SCEN */ + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +#if defined(USART_CR2_LINEN) +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN(if Smartcard is supported) and IREN(if IrDA is supported) bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#if defined (USART_CR3_SCEN) +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#endif /* USART_CR3_IREN */ +#else +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(huart->Instance->CR3, USART_CR3_HDSEL); +#endif /* USART_CR3_IREN*/ +#endif /* USART_CR3_SCEN */ + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} +#endif /* USART_CR2_LINEN */ + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN (if LIN is supported) and CLKEN bits in the USART_CR2 register, + - SCEN (if Smartcard is supported), HDSEL and IREN (if IrDA is supported) bits in the USART_CR3 register. */ +#if defined (USART_CR2_LINEN) + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); +#else + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); +#endif /* USART_CR2_LINEN */ +#if defined (USART_CR3_SCEN) +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); +#endif /* USART_CR3_IREN */ +#else +#if defined (USART_CR3_IREN) + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); +#else + CLEAR_BIT(huart->Instance->CR3, USART_CR3_HDSEL); +#endif /* USART_CR3_IREN */ +#endif /* USART_CR3_SCEN */ + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used instead of the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + __HAL_LOCK(huart); + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + +#if defined(USART_CR1_UESM) + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + +#endif /* USART_CR1_UESM */ + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the Transmit Data Register Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Check that USART RTOEN bit is set */ + if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + + return(UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + __HAL_UNLOCK(huart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Check that USART RTOEN bit is set */ + if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + + return(UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + __HAL_LOCK(huart); + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE) != 0U) || + ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + &&((isrflags & USART_ISR_IDLE) != 0U) + &&((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ( (nb_remaining_rx_data > 0U) + &&(nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (huart->hdmarx->Init.Mode != DMA_CIRCULAR) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ( (huart->RxXferCount > 0U) + &&(nb_rx_data > 0U) ) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif + } + return; + } + } +#if defined(USART_CR1_UESM) + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +#endif /* USART_CR1_UESM */ + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE) != 0U) + && ((cr1its & USART_CR1_TXEIE) != 0U)) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +#if defined(USART_CR2_LINEN) +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} +#endif /* USART_CR2_LINEN */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ +#if defined(USART_CR1_UESM) + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ +#endif /* USART_CR1_UESM */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + tmpreg |= huart->Init.OneBitSampling; + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint16_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint16_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Handle UART Communication Timeout. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + + if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (hdma->Init.Mode != DMA_CIRCULAR) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (hdma->Init.Mode != DMA_CIRCULAR) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize/2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c new file mode 100644 index 0000000..19e5888 --- /dev/null +++ b/Relays/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c @@ -0,0 +1,802 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +#if defined(USART_CR1_UESM) +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +#endif /* USART_CR1_UESM */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + +#if defined(USART_CR1_UESM) + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + +#endif +@endverbatim + * @{ + */ + +#if defined(USART_CR1_UESM) +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +#endif /* USART_CR1_UESM */ + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. +#if defined(USART_CR1_UESM) + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality +#endif + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +#if defined(USART_CR1_UESM) +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +#endif /* USART_CR1_UESM */ +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_IT(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data copy from RDR will be + handled by DMA from a uint16_t frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ +#if defined(USART_CR1_UESM) + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} +#endif /* USART_CR1_UESM */ + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Relays/Relays Debug.launch b/Relays/Relays Debug.launch new file mode 100644 index 0000000..4c11f94 --- /dev/null +++ b/Relays/Relays Debug.launch @@ -0,0 +1,73 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Relays/Relays.ioc b/Relays/Relays.ioc new file mode 100644 index 0000000..8e0b6ff --- /dev/null +++ b/Relays/Relays.ioc @@ -0,0 +1,143 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +GPIO.groupedBy=Group By Peripherals +KeepUserPlacement=false +Mcu.Family=STM32F0 +Mcu.IP0=NVIC +Mcu.IP1=RCC +Mcu.IP2=SYS +Mcu.IP3=USART1 +Mcu.IPNb=4 +Mcu.Name=STM32F030F4Px +Mcu.Package=TSSOP20 +Mcu.Pin0=PF0-OSC_IN +Mcu.Pin1=PF1-OSC_OUT +Mcu.Pin10=PA10 +Mcu.Pin11=PA13 +Mcu.Pin12=PA14 +Mcu.Pin13=VP_SYS_VS_Systick +Mcu.Pin2=PA0 +Mcu.Pin3=PA1 +Mcu.Pin4=PA2 +Mcu.Pin5=PA5 +Mcu.Pin6=PA6 +Mcu.Pin7=PA7 +Mcu.Pin8=PB1 +Mcu.Pin9=PA9 +Mcu.PinsNb=14 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32F030F4Px +MxCube.Version=6.1.0 +MxDb.Version=DB.6.0.10 +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true +PA0.GPIOParameters=GPIO_PuPd,GPIO_Label +PA0.GPIO_Label=IN2 +PA0.GPIO_PuPd=GPIO_PULLUP +PA0.Locked=true +PA0.Signal=GPIO_Input +PA1.GPIOParameters=GPIO_PuPd,GPIO_Label +PA1.GPIO_Label=IN1 +PA1.GPIO_PuPd=GPIO_PULLUP +PA1.Locked=true +PA1.Signal=GPIO_Input +PA10.Locked=true +PA10.Mode=Asynchronous +PA10.Signal=USART1_RX +PA13.Mode=Serial_Wire +PA13.Signal=SYS_SWDIO +PA14.Locked=true +PA14.Mode=Serial_Wire +PA14.Signal=SYS_SWCLK +PA2.GPIOParameters=GPIO_Speed,GPIO_Label +PA2.GPIO_Label=LED +PA2.GPIO_Speed=GPIO_SPEED_FREQ_LOW +PA2.Locked=true +PA2.Signal=GPIO_Output +PA5.GPIOParameters=GPIO_Speed,GPIO_Label +PA5.GPIO_Label=TEN +PA5.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +PA5.Locked=true +PA5.Signal=GPIO_Output +PA6.GPIOParameters=GPIO_PuPd,GPIO_Label +PA6.GPIO_Label=Button +PA6.GPIO_PuPd=GPIO_PULLUP +PA6.Locked=true +PA6.Signal=GPIO_Input +PA7.GPIOParameters=GPIO_Label +PA7.GPIO_Label=Relay1 +PA7.Locked=true +PA7.Signal=GPIO_Output +PA9.Locked=true +PA9.Mode=Asynchronous +PA9.Signal=USART1_TX +PB1.GPIOParameters=GPIO_Label +PB1.GPIO_Label=Relay2 +PB1.Locked=true +PB1.Signal=GPIO_Output +PF0-OSC_IN.Locked=true +PF0-OSC_IN.Mode=HSE-External-Oscillator +PF0-OSC_IN.Signal=RCC_OSC_IN +PF1-OSC_OUT.Locked=true +PF1-OSC_OUT.Mode=HSE-External-Oscillator +PF1-OSC_OUT.Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32F030F4Px +ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.2 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=Relays.ioc +ProjectManager.ProjectName=Relays +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=STM32CubeIDE +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true +RCC.AHBFreq_Value=24000000 +RCC.APB1CLKDivider=RCC_HCLK_DIV4 +RCC.APB1Freq_Value=6000000 +RCC.APB1TimFreq_Value=12000000 +RCC.FCLKCortexFreq_Value=24000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=24000000 +RCC.IPParameters=AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,PLLCLKFreq_Value,PLLMUL,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USART1Freq_Value,VCOOutput2Freq_Value +RCC.PLLCLKFreq_Value=24000000 +RCC.PLLMUL=RCC_PLL_MUL3 +RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE +RCC.SYSCLKFreq_VALUE=24000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.TimSysFreq_Value=24000000 +RCC.USART1Freq_Value=6000000 +RCC.VCOOutput2Freq_Value=8000000 +USART1.BaudRate=9600 +USART1.IPParameters=VirtualMode-Asynchronous,BaudRate,SwapParam,TxPinLevelInvertParam +USART1.SwapParam=ADVFEATURE_SWAP_DISABLE +USART1.TxPinLevelInvertParam=ADVFEATURE_TXINV_DISABLE +USART1.VirtualMode-Asynchronous=VM_ASYNC +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom +isbadioc=false diff --git a/Relays/STM32F030F4PX_FLASH.ld b/Relays/STM32F030F4PX_FLASH.ld new file mode 100644 index 0000000..495986e --- /dev/null +++ b/Relays/STM32F030F4PX_FLASH.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F030F4Px Device from STM32F0 series + * 16Kbytes FLASH + * 4Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 4K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 16K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/USB-PD_Provider_1port/.extSettings b/USB-PD_Provider_1port/.extSettings new file mode 100644 index 0000000..770f42e --- /dev/null +++ b/USB-PD_Provider_1port/.extSettings @@ -0,0 +1,11 @@ +[ProjectFiles] +HeaderPath=../Drivers/BSP/STM32G0C1E-EV +[Others] +Define= +HALModule= +[Groups] +Application/User= +Doc=../readme.txt; +Drivers/STM32G0xx_HAL_Driver= +Drivers/BSP/STM32G0C1E-EV=../Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.c; + diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/Release_Notes.html b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/Release_Notes.html new file mode 100644 index 0000000..8ed79d6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/Release_Notes.html @@ -0,0 +1,212 @@ + + + + + + + Release Notes for BSP Components Common Drivers + + + + + +
+
+
+
+
+

Release Notes for BSP Components Common Drivers

+

Copyright © 2017 STMicroelectronics
+

+ +
+
+
+

License

+

Licensed by ST under BSD 3-Clause license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:

+

https://opensource.org/licenses/BSD-3-Clause

+

Purpose

+

This directory contains the BSP components common drivers.

+
+
+

Update History

+
+ +
+

Main Changes

+
    +
  • Update release notes format
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Reformat the BSD 3-Clause license declaration in the files header (replace license terms by a web reference to OSI website where those terms lie)
    • +
  • Correct sensor names in headers files hsensor.h and psensor.h
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Add dpredriver.h: support of DP redriver class
    • +
  • Add pwrmon.h: support of power monitor class
    • +
  • Add usbtypecswitch.h: support of USB type C switch class
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Add hsensor.h: support of humidity class
    • +
  • Add psensor.h: support of pressure class
    • +
  • Update tsensor.h: Temperature can be negative
    • +
  • Update accelero.h: LowPower API can enable or disable the low power mode
    • +
  • Update magneto.h: LowPower API can enable or disable the low power mode
    • +
+

Notes:

+

This version breaks the compatibility with previous versions.

+
+
+
+ +
+

Main Changes

+
    +
  • tsensor.h: Fix compilation issue on TSENSOR_InitTypeDef
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • accelero.h: add *DeInit field in ACCELERO_DrvTypeDef structure
    • +
  • audio.h: add *DeInit field in AUDIO_DrvTypeDef structure
    • +
  • idd.h: +
      +
    • add Shunt0StabDelay, Shunt1StabDelay, Shunt2StabDelay, Shunt3StabDelay, Shunt4StabDelay and ShuntNbOnBoard fields in IDD_ConfigTypeDef structure
      • +
    • rename ShuntNumber field to ShuntNbUsed in IDD_ConfigTypeDef structure
      • +
    • +
  • magneto.h: add *DeInit field in MAGNETO_DrvTypeDef structure
    • +
+

Important Note:

+

This release V4.0.0 is not backward compatible with V3.0.0.

+
+
+
+ +
+

Main Changes

+
    +
  • accelero.h: add LowPower field in ACCELERO_DrvTypeDef structure
    • +
  • magneto.h: add LowPower field in MAGNETO_DrvTypeDef structure
    • +
  • gyro.h: add DeInit and LowPower fields in GYRO_DrvTypeDef structure
    • +
  • camera.h: add CAMERA_COLOR_EFFECT_NONE define
    • +
  • idd.h: +
      +
    • add MeasureNb, DeltaDelayUnit and DeltaDelayValue fields in IDD_ConfigTypeDef structure
      • +
    • rename PreDelay field to PreDelayUnit in IDD_ConfigTypeDef structure
      • +
    • +
+

Important Note:

+

This release V3.0.0 is not backward compatible with V2.2.0.

+
+
+
+ +
+

Main Changes

+
    +
  • Magnetometer driver function prototypes added (magneto.h file)
    • +
  • Update “idd.h†file to provide DeInit() and WakeUp() services in IDD current measurement driver
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • IDD current measurement driver function prototypes added (idd.h file)
    • +
  • io.h: add new typedef enum IO_PinState with IO_PIN_RESET and IO_PIN_SET values
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Update “io.h†file to support MFX (Multi Function eXpander) device available on some STM32 boards +
      +
    • add new entries for IO_ModeTypedef enumeration structure
      • +
    • update the IO_DrvTypeDef structure +
        +
      • Update all return values and function parameters to uint32_t
        • +
      • Add a return value for Config field
        • +
      • +
    • +
+

Important Note:

+

This version V2.0.0 is not backward compatible with V1.2.1.

+
+
+
+ +
+

Main Changes

+
    +
  • gyro.h: change “__GIRO_H†by “__GYRO_H†to fix compilation issue under Mac OS
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • EPD (E Paper Display) driver function prototype added (epd.h file)
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Temperature Sensor driver function prototype added
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • First official release with Accelerometer, Audio, Camera, Gyroscope, IO, LCD and Touch Screen drivers function prototypes
    • +
+
+
+
+
+ + + diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/accelero.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/accelero.h new file mode 100644 index 0000000..9be9d08 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/accelero.h @@ -0,0 +1,125 @@ +/** + ****************************************************************************** + * @file accelero.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the Accelerometer driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __ACCELERO_H +#define __ACCELERO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup ACCELERO + * @{ + */ + +/** @defgroup ACCELERO_Exported_Types + * @{ + */ + +/** @defgroup ACCELERO_Driver_structure Accelerometer Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + void (*DeInit)(void); + uint8_t (*ReadID)(void); + void (*Reset)(void); + void (*LowPower)(uint16_t); + void (*ConfigIT)(void); + void (*EnableIT)(uint8_t); + void (*DisableIT)(uint8_t); + uint8_t (*ITStatus)(uint16_t); + void (*ClearIT)(void); + void (*FilterConfig)(uint8_t); + void (*FilterCmd)(uint8_t); + void (*GetXYZ)(int16_t *); +}ACCELERO_DrvTypeDef; +/** + * @} + */ + +/** @defgroup ACCELERO_Configuration_structure Accelerometer Configuration structure + * @{ + */ + +/* ACCELERO struct */ +typedef struct +{ + uint8_t Power_Mode; /* Power-down/Normal Mode */ + uint8_t AccOutput_DataRate; /* OUT data rate */ + uint8_t Axes_Enable; /* Axes enable */ + uint8_t High_Resolution; /* High Resolution enabling/disabling */ + uint8_t BlockData_Update; /* Block Data Update */ + uint8_t Endianness; /* Endian Data selection */ + uint8_t AccFull_Scale; /* Full Scale selection */ + uint8_t Communication_Mode; +}ACCELERO_InitTypeDef; + +/* ACCELERO High Pass Filter struct */ +typedef struct +{ + uint8_t HighPassFilter_Mode_Selection; /* Internal filter mode */ + uint8_t HighPassFilter_CutOff_Frequency; /* High pass filter cut-off frequency */ + uint8_t HighPassFilter_AOI1; /* HPF_enabling/disabling for AOI function on interrupt 1 */ + uint8_t HighPassFilter_AOI2; /* HPF_enabling/disabling for AOI function on interrupt 2 */ + uint8_t HighPassFilter_Data_Sel; + uint8_t HighPassFilter_Stat; +}ACCELERO_FilterConfigTypeDef; + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __ACCELERO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/audio.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/audio.h new file mode 100644 index 0000000..cd6f67d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/audio.h @@ -0,0 +1,104 @@ +/** + ****************************************************************************** + * @file audio.h + * @author MCD Application Team + * @brief This header file contains the common defines and functions prototypes + * for the Audio driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AUDIO_H +#define __AUDIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup AUDIO + * @{ + */ + +/** @defgroup AUDIO_Exported_Constants + * @{ + */ + +/* Codec audio Standards */ +#define CODEC_STANDARD 0x04 +#define I2S_STANDARD I2S_STANDARD_PHILIPS + +/** + * @} + */ + +/** @defgroup AUDIO_Exported_Types + * @{ + */ + +/** @defgroup AUDIO_Driver_structure Audio Driver structure + * @{ + */ +typedef struct +{ + uint32_t (*Init)(uint16_t, uint16_t, uint8_t, uint32_t); + void (*DeInit)(void); + uint32_t (*ReadID)(uint16_t); + uint32_t (*Play)(uint16_t, uint16_t*, uint16_t); + uint32_t (*Pause)(uint16_t); + uint32_t (*Resume)(uint16_t); + uint32_t (*Stop)(uint16_t, uint32_t); + uint32_t (*SetFrequency)(uint16_t, uint32_t); + uint32_t (*SetVolume)(uint16_t, uint8_t); + uint32_t (*SetMute)(uint16_t, uint32_t); + uint32_t (*SetOutputMode)(uint16_t, uint8_t); + uint32_t (*Reset)(uint16_t); +}AUDIO_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __AUDIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/camera.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/camera.h new file mode 100644 index 0000000..70778b1 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/camera.h @@ -0,0 +1,123 @@ +/** + ****************************************************************************** + * @file camera.h + * @author MCD Application Team + * @brief This header file contains the common defines and functions prototypes + * for the camera driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __CAMERA_H +#define __CAMERA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup CAMERA + * @{ + */ + + +/** @defgroup CAMERA_Exported_Types + * @{ + */ + +/** @defgroup CAMERA_Driver_structure Camera Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t, uint32_t); + uint16_t (*ReadID)(uint16_t); + void (*Config)(uint16_t, uint32_t, uint32_t, uint32_t); +}CAMERA_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CAMERA_Exported_Constants + * @{ + */ +#define CAMERA_R160x120 0x00 /* QQVGA Resolution */ +#define CAMERA_R320x240 0x01 /* QVGA Resolution */ +#define CAMERA_R480x272 0x02 /* 480x272 Resolution */ +#define CAMERA_R640x480 0x03 /* VGA Resolution */ + +#define CAMERA_CONTRAST_BRIGHTNESS 0x00 /* Camera contrast brightness features */ +#define CAMERA_BLACK_WHITE 0x01 /* Camera black white feature */ +#define CAMERA_COLOR_EFFECT 0x03 /* Camera color effect feature */ + +#define CAMERA_BRIGHTNESS_LEVEL0 0x00 /* Brightness level -2 */ +#define CAMERA_BRIGHTNESS_LEVEL1 0x01 /* Brightness level -1 */ +#define CAMERA_BRIGHTNESS_LEVEL2 0x02 /* Brightness level 0 */ +#define CAMERA_BRIGHTNESS_LEVEL3 0x03 /* Brightness level +1 */ +#define CAMERA_BRIGHTNESS_LEVEL4 0x04 /* Brightness level +2 */ + +#define CAMERA_CONTRAST_LEVEL0 0x05 /* Contrast level -2 */ +#define CAMERA_CONTRAST_LEVEL1 0x06 /* Contrast level -1 */ +#define CAMERA_CONTRAST_LEVEL2 0x07 /* Contrast level 0 */ +#define CAMERA_CONTRAST_LEVEL3 0x08 /* Contrast level +1 */ +#define CAMERA_CONTRAST_LEVEL4 0x09 /* Contrast level +2 */ + +#define CAMERA_BLACK_WHITE_BW 0x00 /* Black and white effect */ +#define CAMERA_BLACK_WHITE_NEGATIVE 0x01 /* Negative effect */ +#define CAMERA_BLACK_WHITE_BW_NEGATIVE 0x02 /* BW and Negative effect */ +#define CAMERA_BLACK_WHITE_NORMAL 0x03 /* Normal effect */ + +#define CAMERA_COLOR_EFFECT_NONE 0x00 /* No effects */ +#define CAMERA_COLOR_EFFECT_BLUE 0x01 /* Blue effect */ +#define CAMERA_COLOR_EFFECT_GREEN 0x02 /* Green effect */ +#define CAMERA_COLOR_EFFECT_RED 0x03 /* Red effect */ +#define CAMERA_COLOR_EFFECT_ANTIQUE 0x04 /* Antique effect */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __CAMERA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/dpredriver.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/dpredriver.h new file mode 100644 index 0000000..a14f5c3 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/dpredriver.h @@ -0,0 +1,104 @@ +/** + ****************************************************************************** + * @file dpredriver.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the + * DisplayPort Linear Redriver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __DPREDRIVER_H +#define __DPREDRIVER_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup DPREDRIVER + * @{ + */ + +/** @defgroup DPREDRIVER_Exported_Types + * @{ + */ + +/** @defgroup DPREDRIVER_Channel_Identifier Channel Identifier + * @{ + */ + typedef enum { + CHANNEL_DP0 = 0, + CHANNEL_DP1, + CHANNEL_DP2, + CHANNEL_DP3, + CHANNEL_RX1, + CHANNEL_RX2, + CHANNEL_SSTX + } DPREDRIVER_ChannelId_t; +/** + * @} + */ + + /** @defgroup DPREDRIVER_Driver_structure DisplayPort Linear Redriver Driver structure + * @{ + */ +typedef struct +{ + uint32_t (*Init)(uint16_t); + void (*DeInit)(uint16_t); + uint32_t (*PowerOn)(uint16_t); + uint32_t (*PowerOff)(uint16_t); + uint32_t (*SetEQGain)(uint16_t, DPREDRIVER_ChannelId_t, uint8_t); + uint32_t (*EnableChannel)(uint16_t, DPREDRIVER_ChannelId_t); + uint32_t (*DisableChannel)(uint16_t, DPREDRIVER_ChannelId_t); +}DPREDRIVER_Drv_t; +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __DPREDRIVER_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/epd.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/epd.h new file mode 100644 index 0000000..1af0373 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/epd.h @@ -0,0 +1,97 @@ +/** + ****************************************************************************** + * @file epd.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * EPD (E Paper Display) driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __EPD_H +#define __EPD_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup Common + * @{ + */ + +/** @addtogroup EPD + * @{ + */ + +/** @defgroup EPD_Exported_Types + * @{ + */ + +/** @defgroup EPD_Driver_structure E Paper Display Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(void); + void (*WritePixel)(uint8_t); + + /* Optimized operation */ + void (*SetDisplayWindow)(uint16_t, uint16_t, uint16_t, uint16_t); + void (*RefreshDisplay)(void); + void (*CloseChargePump)(void); + + uint16_t (*GetEpdPixelWidth)(void); + uint16_t (*GetEpdPixelHeight)(void); + void (*DrawImage)(uint16_t, uint16_t, uint16_t, uint16_t, uint8_t*); +} +EPD_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* EPD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/gyro.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/gyro.h new file mode 100644 index 0000000..53ed668 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/gyro.h @@ -0,0 +1,127 @@ +/** + ****************************************************************************** + * @file gyro.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the gyroscope driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __GYRO_H +#define __GYRO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup GYRO + * @{ + */ + +/** @defgroup GYRO_Exported_Types + * @{ + */ + +/** @defgroup GYRO_Driver_structure Gyroscope Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + void (*DeInit)(void); + uint8_t (*ReadID)(void); + void (*Reset)(void); + void (*LowPower)(uint16_t); + void (*ConfigIT)(uint16_t); + void (*EnableIT)(uint8_t); + void (*DisableIT)(uint8_t); + uint8_t (*ITStatus)(uint16_t, uint16_t); + void (*ClearIT)(uint16_t, uint16_t); + void (*FilterConfig)(uint8_t); + void (*FilterCmd)(uint8_t); + void (*GetXYZ)(float *); +}GYRO_DrvTypeDef; +/** + * @} + */ + +/** @defgroup GYRO_Config_structure Gyroscope Configuration structure + * @{ + */ + +typedef struct +{ + uint8_t Power_Mode; /* Power-down/Sleep/Normal Mode */ + uint8_t Output_DataRate; /* OUT data rate */ + uint8_t Axes_Enable; /* Axes enable */ + uint8_t Band_Width; /* Bandwidth selection */ + uint8_t BlockData_Update; /* Block Data Update */ + uint8_t Endianness; /* Endian Data selection */ + uint8_t Full_Scale; /* Full Scale selection */ +}GYRO_InitTypeDef; + +/* GYRO High Pass Filter struct */ +typedef struct +{ + uint8_t HighPassFilter_Mode_Selection; /* Internal filter mode */ + uint8_t HighPassFilter_CutOff_Frequency; /* High pass filter cut-off frequency */ +}GYRO_FilterConfigTypeDef; + +/*GYRO Interrupt struct */ +typedef struct +{ + uint8_t Latch_Request; /* Latch interrupt request into CLICK_SRC register */ + uint8_t Interrupt_Axes; /* X, Y, Z Axes Interrupts */ + uint8_t Interrupt_ActiveEdge; /* Interrupt Active edge */ +}GYRO_InterruptConfigTypeDef; + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __GYRO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/hsensor.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/hsensor.h new file mode 100644 index 0000000..bd44bba --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/hsensor.h @@ -0,0 +1,83 @@ +/** + ****************************************************************************** + * @file hsensor.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the + * Humidity Sensor driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __HSENSOR_H +#define __HSENSOR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup HSENSOR + * @{ + */ + +/** @defgroup HSENSOR_Exported_Types + * @{ + */ + +/** @defgroup HSENSOR_Driver_structure Humidity Sensor Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + uint8_t (*ReadID)(uint16_t); + float (*ReadHumidity)(uint16_t); +}HSENSOR_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __HSENSOR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/idd.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/idd.h new file mode 100644 index 0000000..40dfbcd --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/idd.h @@ -0,0 +1,150 @@ +/** + ****************************************************************************** + * @file idd.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the IDD driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __IDD_H +#define __IDD_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup IDD + * @{ + */ + +/** @defgroup IDD_Exported_Types IDD Exported Types + * @{ + */ + +/** @defgroup IDD_Config_structure IDD Configuration structure + * @{ + */ +typedef struct +{ + uint16_t AmpliGain; /*!< Specifies ampli gain value + */ + uint16_t VddMin; /*!< Specifies minimum MCU VDD can reach to protect MCU from reset + */ + uint16_t Shunt0Value; /*!< Specifies value of Shunt 0 if existing + */ + uint16_t Shunt1Value; /*!< Specifies value of Shunt 1 if existing + */ + uint16_t Shunt2Value; /*!< Specifies value of Shunt 2 if existing + */ + uint16_t Shunt3Value; /*!< Specifies value of Shunt 3 if existing + */ + uint16_t Shunt4Value; /*!< Specifies value of Shunt 4 if existing + */ + uint16_t Shunt0StabDelay; /*!< Specifies delay of Shunt 0 stabilization if existing + */ + uint16_t Shunt1StabDelay; /*!< Specifies delay of Shunt 1 stabilization if existing + */ + uint16_t Shunt2StabDelay; /*!< Specifies delay of Shunt 2 stabilization if existing + */ + uint16_t Shunt3StabDelay; /*!< Specifies delay of Shunt 3 stabilization if existing + */ + uint16_t Shunt4StabDelay; /*!< Specifies delay of Shunt 4 stabilization if existing + */ + uint8_t ShuntNbOnBoard; /*!< Specifies number of shunts that are present on board + This parameter can be a value of @ref IDD_shunt_number */ + uint8_t ShuntNbUsed; /*!< Specifies number of shunts used for measurement + This parameter can be a value of @ref IDD_shunt_number */ + uint8_t VrefMeasurement; /*!< Specifies if Vref is automatically measured before each Idd measurement + This parameter can be a value of @ref IDD_Vref_Measurement */ + uint8_t Calibration; /*!< Specifies if calibration is done before each Idd measurement + */ + uint8_t PreDelayUnit; /*!< Specifies Pre delay unit + This parameter can be a value of @ref IDD_PreDelay */ + uint8_t PreDelayValue; /*!< Specifies Pre delay value in selected unit + */ + uint8_t MeasureNb; /*!< Specifies number of Measure to be performed + This parameter can be a value between 1 and 256 */ + uint8_t DeltaDelayUnit; /*!< Specifies Delta delay unit + This parameter can be a value of @ref IDD_DeltaDelay */ + uint8_t DeltaDelayValue; /*!< Specifies Delta delay between 2 measures + value can be between 1 and 128 */ +}IDD_ConfigTypeDef; +/** + * @} + */ + +/** @defgroup IDD_Driver_structure IDD Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + void (*DeInit)(uint16_t); + uint16_t (*ReadID)(uint16_t); + void (*Reset)(uint16_t); + void (*LowPower)(uint16_t); + void (*WakeUp)(uint16_t); + void (*Start)(uint16_t); + void (*Config)(uint16_t,IDD_ConfigTypeDef); + void (*GetValue)(uint16_t, uint32_t *); + void (*EnableIT)(uint16_t); + void (*ClearIT)(uint16_t); + uint8_t (*GetITStatus)(uint16_t); + void (*DisableIT)(uint16_t); + void (*ErrorEnableIT)(uint16_t); + void (*ErrorClearIT)(uint16_t); + uint8_t (*ErrorGetITStatus)(uint16_t); + void (*ErrorDisableIT)(uint16_t); + uint8_t (*ErrorGetSrc)(uint16_t); + uint8_t (*ErrorGetCode)(uint16_t); +}IDD_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __IDD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/io.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/io.h new file mode 100644 index 0000000..4989e58 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/io.h @@ -0,0 +1,132 @@ +/** + ****************************************************************************** + * @file io.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the IO driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __IO_H +#define __IO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup IO + * @{ + */ + +/** @defgroup IO_Exported_Types + * @{ + */ + +/** + * @brief IO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + IO_PIN_RESET = 0, + IO_PIN_SET +}IO_PinState; + +typedef enum +{ + IO_MODE_INPUT = 0, /* input floating */ + IO_MODE_OUTPUT, /* output Push Pull */ + IO_MODE_IT_RISING_EDGE, /* float input - irq detect on rising edge */ + IO_MODE_IT_FALLING_EDGE, /* float input - irq detect on falling edge */ + IO_MODE_IT_LOW_LEVEL, /* float input - irq detect on low level */ + IO_MODE_IT_HIGH_LEVEL, /* float input - irq detect on high level */ + /* following modes only available on MFX*/ + IO_MODE_ANALOG, /* analog mode */ + IO_MODE_OFF, /* when pin isn't used*/ + IO_MODE_INPUT_PU, /* input with internal pull up resistor */ + IO_MODE_INPUT_PD, /* input with internal pull down resistor */ + IO_MODE_OUTPUT_OD, /* Open Drain output without internal resistor */ + IO_MODE_OUTPUT_OD_PU, /* Open Drain output with internal pullup resistor */ + IO_MODE_OUTPUT_OD_PD, /* Open Drain output with internal pulldown resistor */ + IO_MODE_OUTPUT_PP, /* PushPull output without internal resistor */ + IO_MODE_OUTPUT_PP_PU, /* PushPull output with internal pullup resistor */ + IO_MODE_OUTPUT_PP_PD, /* PushPull output with internal pulldown resistor */ + IO_MODE_IT_RISING_EDGE_PU, /* push up resistor input - irq on rising edge */ + IO_MODE_IT_RISING_EDGE_PD, /* push dw resistor input - irq on rising edge */ + IO_MODE_IT_FALLING_EDGE_PU, /* push up resistor input - irq on falling edge */ + IO_MODE_IT_FALLING_EDGE_PD, /* push dw resistor input - irq on falling edge */ + IO_MODE_IT_LOW_LEVEL_PU, /* push up resistor input - irq detect on low level */ + IO_MODE_IT_LOW_LEVEL_PD, /* push dw resistor input - irq detect on low level */ + IO_MODE_IT_HIGH_LEVEL_PU, /* push up resistor input - irq detect on high level */ + IO_MODE_IT_HIGH_LEVEL_PD, /* push dw resistor input - irq detect on high level */ + +}IO_ModeTypedef; + +/** @defgroup IO_Driver_structure IO Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + uint16_t (*ReadID)(uint16_t); + void (*Reset)(uint16_t); + + void (*Start)(uint16_t, uint32_t); + uint8_t (*Config)(uint16_t, uint32_t, IO_ModeTypedef); + void (*WritePin)(uint16_t, uint32_t, uint8_t); + uint32_t (*ReadPin)(uint16_t, uint32_t); + + void (*EnableIT)(uint16_t); + void (*DisableIT)(uint16_t); + uint32_t (*ITStatus)(uint16_t, uint32_t); + void (*ClearIT)(uint16_t, uint32_t); + +}IO_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __IO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/lcd.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/lcd.h new file mode 100644 index 0000000..fc07557 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/lcd.h @@ -0,0 +1,96 @@ +/** + ****************************************************************************** + * @file lcd.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the LCD driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __LCD_H +#define __LCD_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup LCD + * @{ + */ + +/** @defgroup LCD_Exported_Types + * @{ + */ + +/** @defgroup LCD_Driver_structure LCD Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(void); + uint16_t (*ReadID)(void); + void (*DisplayOn)(void); + void (*DisplayOff)(void); + void (*SetCursor)(uint16_t, uint16_t); + void (*WritePixel)(uint16_t, uint16_t, uint16_t); + uint16_t (*ReadPixel)(uint16_t, uint16_t); + + /* Optimized operation */ + void (*SetDisplayWindow)(uint16_t, uint16_t, uint16_t, uint16_t); + void (*DrawHLine)(uint16_t, uint16_t, uint16_t, uint16_t); + void (*DrawVLine)(uint16_t, uint16_t, uint16_t, uint16_t); + + uint16_t (*GetLcdPixelWidth)(void); + uint16_t (*GetLcdPixelHeight)(void); + void (*DrawBitmap)(uint16_t, uint16_t, uint8_t*); + void (*DrawRGBImage)(uint16_t, uint16_t, uint16_t, uint16_t, uint8_t*); +}LCD_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __LCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/magneto.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/magneto.h new file mode 100644 index 0000000..c9766a5 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/magneto.h @@ -0,0 +1,107 @@ +/** + ****************************************************************************** + * @file magneto.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the MAGNETO driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAGNETO_H +#define __MAGNETO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup MAGNETO + * @{ + */ + +/** @defgroup MAGNETO_Exported_Types + * @{ + */ + +/** @defgroup MAGNETO_Config_structure Magnetometer Configuration structure + * @{ + */ +typedef struct +{ + uint8_t Register1; + uint8_t Register2; + uint8_t Register3; + uint8_t Register4; + uint8_t Register5; +}MAGNETO_InitTypeDef; +/** + * @} + */ + +/** @defgroup MAGNETO_Driver_structure Magnetometer Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(MAGNETO_InitTypeDef); + void (*DeInit)(void); + uint8_t (*ReadID)(void); + void (*Reset)(void); + void (*LowPower)(uint16_t); + void (*ConfigIT)(void); + void (*EnableIT)(uint8_t); + void (*DisableIT)(uint8_t); + uint8_t (*ITStatus)(uint16_t); + void (*ClearIT)(void); + void (*FilterConfig)(uint8_t); + void (*FilterCmd)(uint8_t); + void (*GetXYZ)(int16_t *); +}MAGNETO_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAGNETO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/psensor.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/psensor.h new file mode 100644 index 0000000..3412ab1 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/psensor.h @@ -0,0 +1,83 @@ +/** + ****************************************************************************** + * @file psensor.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the + * Pressure Sensor driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __PSENSOR_H +#define __PSENSOR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup PSENSOR + * @{ + */ + +/** @defgroup PSENSOR_Exported_Types + * @{ + */ + +/** @defgroup PSENSOR_Driver_structure Pressure Sensor Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + uint8_t (*ReadID)(uint16_t); + float (*ReadPressure)(uint16_t); +}PSENSOR_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __PSENSOR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/pwrmon.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/pwrmon.h new file mode 100644 index 0000000..12b0285 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/pwrmon.h @@ -0,0 +1,246 @@ +/** + ****************************************************************************** + * @file pwrmon.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the + * Current/Power Monitor device driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __PWRMON_H +#define __PWRMON_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup PWRMON + * @{ + */ + +/** @defgroup PWRMON_Exported_Types + * @{ + */ + +/** @defgroup PWRMON_Operating_Mode_enum Power Monitor Operating Mode enums + * @{ + */ +typedef enum { + OPERATING_MODE_TRIGGERED = 0, + OPERATING_MODE_CONTINUOUS, + OPERATING_MODE_NB +} PWRMON_OperatingMode_t; +/** + * @} + */ + +/** @defgroup PWRMON_Conversion_Time_enum Power Monitor Conversion_Time enums + * @{ + */ +typedef enum { + CONVERT_TIME_140 = 0, + CONVERT_TIME_204, + CONVERT_TIME_332, + CONVERT_TIME_588, + CONVERT_TIME_1100, + CONVERT_TIME_2116, + CONVERT_TIME_4156, + CONVERT_TIME_8244, + CONVERT_TIME_NB +} PWRMON_ConvertTime_t; +/** + * @} + */ + +/** @defgroup PWRMON_Conversion_Time_enum Power Monitor Conversion_Time enums + * @{ + */ +typedef enum { + AVERAGING_MODE_1 = 0, + AVERAGING_MODE_4, + AVERAGING_MODE_16, + AVERAGING_MODE_64, + AVERAGING_MODE_128, + AVERAGING_MODE_256, + AVERAGING_MODE_512, + AVERAGING_MODE_1024, + AVERAGING_MODE_NB +} PWRMON_AveragingMode_t; +/** + * @} + */ + +/** @defgroup PWRMON_Device_Configuration_structure Power Monitor Device Configuration structure + * @{ + */ +typedef struct +{ + PWRMON_ConvertTime_t ShuntConvertTime; + PWRMON_ConvertTime_t BusConvertTime; + PWRMON_AveragingMode_t AveragingMode; +} PWRMON_Config_t; +/** + * @} + */ + +/** @defgroup PWRMON_Alert_Polarity_enum Power Monitor Alert Polarity enums + * @{ + */ +typedef enum { + ALERT_POLARITY_NORMAL = 0, + ALERT_POLARITY_INVERTED, + ALERT_POLARITY_NB +} PWRMON_AlertPolarity_t; +/** + * @} + */ + +/** @defgroup PWRMON_Alert_Latch_Enable_enum Power Monitor Alert Latch Enable enums + * @{ + */ +typedef enum { + ALERT_LATCH_DISABLE = 0, + ALERT_LATCH_ENABLE, + ALERT_LATCH_NB +} PWRMON_AlertLatchEnable_t; +/** + * @} + */ + +/** @defgroup PWRMON_Alert_Function_enum Power Monitor Alert Function enums + * @{ + */ +typedef enum { + ALERT_FUNCTION_NONE = 0, + ALERT_FUNCTION_SOL, + ALERT_FUNCTION_SUL, + ALERT_FUNCTION_BOL, + ALERT_FUNCTION_BUL, + ALERT_FUNCTION_POL, + ALERT_FUNCTION_NB, +} PWRMON_AlertFunction_t; +/** + * @} + */ + +/** @defgroup PWRMON_Alert_Configuration_structure Power Monitor Alert Configuration structure + * @{ + */ +typedef struct +{ + PWRMON_AlertPolarity_t Polarity; + PWRMON_AlertLatchEnable_t LatchEnable; +} PWRMON_AlertPinConfig_t; +/** + * @} + */ + +/** @defgroup PWRMON_Voltage_Input_enum Power Monitor Voltage Input enums + * @{ + */ +typedef enum { + VOLTAGE_INPUT_SHUNT = 0, + VOLTAGE_INPUT_BUS, + VOLTAGE_INPUT_ALL, + VOLTAGE_INPUT_NB +} PWRMON_InputSignal_t; +/** + * @} + */ + +/** @defgroup PWRMON_Flag_enum Power Monitor Flag enums + * @{ + */ +typedef enum { + FLAG_ALERT_FUNCTION = 0, + FLAG_CONVERSION_READY, + FLAG_MATH_OVERFLOW, + FLAG_NB +} PWRMON_Flag_t; +/** + * @} + */ + +/** @defgroup PWRMON_Driver_structure Power Monitor Driver structure + * @{ + */ +typedef struct +{ +void (*Init)(uint16_t, PWRMON_Config_t *); +void (*DeInit)(uint16_t); +uint16_t (*ReadId)(uint16_t); +void (*Reset)(uint16_t); +void (*SetCalibration)(uint16_t, uint16_t); +uint16_t (*GetCalibration)(uint16_t); +void (*SetAlertFunction)(uint16_t, PWRMON_AlertFunction_t); +PWRMON_AlertFunction_t (*GetAlertFunction)(uint16_t); +void (*AlertPinConfig)(uint16_t, PWRMON_AlertPinConfig_t *); +void (*SetVBusThreshold)(uint16_t, uint16_t); +uint16_t (*GetVBusThreshold)(uint16_t); +void (*SetVShuntThreshold)(uint16_t, int16_t); +int16_t (*GetVShuntThreshold)(uint16_t); +void (*SetPowerThreshold)(uint16_t, uint32_t); +uint32_t (*GetPowerThreshold)(uint16_t); +void (*AlertThresholdEnableIT)(uint16_t); +void (*AlertThresholdDisableIT)(uint16_t); +void (*ConversionReadyEnableIT)(uint16_t); +void (*ConversionReadyDisableIT)(uint16_t); +void (*StartConversion)(uint16_t, PWRMON_InputSignal_t, PWRMON_OperatingMode_t); +void (*StopConversion)(uint16_t); +uint16_t (*GetVBus)(uint16_t); +int16_t (*GetVShunt)(uint16_t); +uint16_t (*GetPower)(uint16_t); +int16_t (*GetCurrent)(uint16_t); +uint8_t (*GetFlag)(uint16_t, PWRMON_Flag_t); +} PWRMON_Drv_t; +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __PWRMON_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/ts.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/ts.h new file mode 100644 index 0000000..8016be8 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/ts.h @@ -0,0 +1,89 @@ +/** + ****************************************************************************** + * @file ts.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the Touch Screen driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __TS_H +#define __TS_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TS + * @{ + */ + +/** @defgroup TS_Exported_Types + * @{ + */ + +/** @defgroup TS_Driver_structure Touch Sensor Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + uint16_t (*ReadID)(uint16_t); + void (*Reset)(uint16_t); + void (*Start)(uint16_t); + uint8_t (*DetectTouch)(uint16_t); + void (*GetXY)(uint16_t, uint16_t*, uint16_t*); + void (*EnableIT)(uint16_t); + void (*ClearIT)(uint16_t); + uint8_t (*GetITStatus)(uint16_t); + void (*DisableIT)(uint16_t); +}TS_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __TS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/tsensor.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/tsensor.h new file mode 100644 index 0000000..23b6c6d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/tsensor.h @@ -0,0 +1,100 @@ +/** + ****************************************************************************** + * @file tsensor.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the + * Temperature Sensor driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __TSENSOR_H +#define __TSENSOR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TSENSOR + * @{ + */ + +/** @defgroup TSENSOR_Exported_Types + * @{ + */ + +/** @defgroup TSENSOR_Config_structure Temperature Sensor Configuration structure + * @{ + */ +typedef struct +{ + uint8_t AlertMode; /* Alert Mode Temperature out of range*/ + uint8_t ConversionMode; /* Continuous/One Shot Mode */ + uint8_t ConversionResolution; /* Temperature Resolution */ + uint8_t ConversionRate; /* Number of measure per second */ + int8_t TemperatureLimitHigh; /* High Temperature Limit Range */ + int8_t TemperatureLimitLow; /* Low Temperature Limit Range */ +}TSENSOR_InitTypeDef; +/** + * @} + */ + +/** @defgroup TSENSOR_Driver_structure Temperature Sensor Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t, TSENSOR_InitTypeDef *); + uint8_t (*IsReady)(uint16_t, uint32_t); + uint8_t (*ReadStatus)(uint16_t); + float (*ReadTemp)(uint16_t); +}TSENSOR_DrvTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __TSENSOR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/Common/usbtypecswitch.h b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/usbtypecswitch.h new file mode 100644 index 0000000..3733c8f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/Common/usbtypecswitch.h @@ -0,0 +1,114 @@ +/** + ****************************************************************************** + * @file usbtypecswitch.h + * @author MCD Application Team + * @brief This header file contains the functions prototypes for the + * crossbar switch device for USB Type-C systems. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBTYPECSWITCH_H +#define __USBTYPECSWITCH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TYPECSWITCH + * @{ + */ + +/** @defgroup TYPECSWITCH_Exported_Types + * @{ + */ + typedef enum { + USB_NORMAL = 0, + USB_FLIPPED, + DFP_D_PIN_ASSIGNMENT_A_NORMAL, + DFP_D_PIN_ASSIGNMENT_A_FLIPPED, + DFP_D_PIN_ASSIGNMENT_B_NORMAL, + DFP_D_PIN_ASSIGNMENT_B_FLIPPED, + DFP_D_PIN_ASSIGNMENT_C_NORMAL, + DFP_D_PIN_ASSIGNMENT_C_FLIPPED, + DFP_D_PIN_ASSIGNMENT_D_NORMAL, + DFP_D_PIN_ASSIGNMENT_D_FLIPPED, + DFP_D_PIN_ASSIGNMENT_E_NORMAL, + DFP_D_PIN_ASSIGNMENT_E_FLIPPED, + DFP_D_PIN_ASSIGNMENT_F_NORMAL, + DFP_D_PIN_ASSIGNMENT_F_FLIPPED, + UFP_D_PIN_ASSIGNMENT_A_NORMAL, + UFP_D_PIN_ASSIGNMENT_A_FLIPPED, + UFP_D_PIN_ASSIGNMENT_B_NORMAL, + UFP_D_PIN_ASSIGNMENT_B_FLIPPED, + UFP_D_PIN_ASSIGNMENT_C_NORMAL, + UFP_D_PIN_ASSIGNMENT_C_FLIPPED, + UFP_D_PIN_ASSIGNMENT_D_NORMAL, + UFP_D_PIN_ASSIGNMENT_D_FLIPPED, + UFP_D_PIN_ASSIGNMENT_E_NORMAL, + UFP_D_PIN_ASSIGNMENT_E_FLIPPED, + UFP_D_PIN_ASSIGNMENT_F_NORMAL, + UFP_D_PIN_ASSIGNMENT_F_FLIPPED + } TYPECSWITCH_Mode_t; + +/** @defgroup TYPECSWITCH_Driver_structure USB Type-C Crossbar Switch Driver structure + * @{ + */ +typedef struct +{ + uint32_t (*Init)(uint16_t); + void (*DeInit)(uint16_t); + uint32_t (*PowerOn)(uint16_t); + uint32_t (*PowerOff)(uint16_t); + uint32_t (*SetMode)(uint16_t, TYPECSWITCH_Mode_t); + uint32_t (*IsSupportedMode)(TYPECSWITCH_Mode_t); +} TYPECSWITCH_Drv_t; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBTYPECSWITCH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/Release_Notes.html b/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/Release_Notes.html new file mode 100644 index 0000000..fa7c455 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/Release_Notes.html @@ -0,0 +1,65 @@ + + + + + + + Release Notes for CBTL08GP053 Component Drivers + + + + + +
+
+
+
+
+

Release Notes for CBTL08GP053 Component Drivers

+

Copyright © 2017 STMicroelectronics
+

+ +
+
+
+

License

+

Licensed by ST under BSD 3-Clause license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:

+

https://opensource.org/licenses/BSD-3-Clause

+

Purpose

+

This directory contains the CBTL08GP053 component drivers.

+
+
+

Update History

+
+ +
+

Main Changes

+
    +
  • Fix minor mispelled words
    • +
  • Update Release Notes format
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • First official release of CBTL08GP053 Component driver
    • +
+
+
+
+
+ + + diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/cbtl08gp053.c b/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/cbtl08gp053.c new file mode 100644 index 0000000..e4730b5 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/cbtl08gp053.c @@ -0,0 +1,391 @@ +/** + ****************************************************************************** + * @file cbtl08gp053.c + * @author MCD Application Team + * @brief This file provides a set of functions needed to manage the CBTL08GP053 + * (Crossbar switch device for USB Type-C systems). + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "cbtl08gp053.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @defgroup CBTL08GP053 + * @brief This file provides a set of functions needed to drive the + * CBTL08GP053 Crossbar switch device for USB Type-C systems. + * @{ + */ + +/** @defgroup CBTL08GP053_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup CBTL08GP053_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup CBTL08GP053_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CBTL08GP053_Private_Variables + * @{ + */ +#ifdef DBG_BSP_MUX +CBTL08GP053_TypeDef CBTL08GP053 = +{ + .SYS_CTRL = 0x00, + .OP1_CTRL = 0x00, + .OP2_CTRL = 0x00, + .OP3_CTRL = 0x00, + .OP4_CTRL = 0x00, + .OP5_CTRL = 0x00, + .CROSS5_CTRL = 0x01, + .SW_CTRL = 0x00, + .SW_CTRL = 0x00, + .REVISION = 0xA0 +}; +#endif /* DBG_BSP_MUX */ + +/* Type-C Crosspoint Switch Driver structure initialization */ +TYPECSWITCH_Drv_t cbtl08gp053_drv = { + cbtl08gp053_Init, + cbtl08gp053_DeInit, + cbtl08gp053_PowerOn, + cbtl08gp053_PowerOff, + cbtl08gp053_SetMode, + cbtl08gp053_IsSupportedMode +}; + +/* Supported USB Type-C pin assignments */ +static const uint32_t cbtl08gp053_SupportedModes = + ( 1 << USB_NORMAL | + 1 << USB_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_C_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_C_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_D_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_D_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_E_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_E_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_F_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_F_FLIPPED | + 1 << UFP_D_PIN_ASSIGNMENT_C_NORMAL | + 1 << UFP_D_PIN_ASSIGNMENT_C_FLIPPED | + 1 << UFP_D_PIN_ASSIGNMENT_D_NORMAL | + 1 << UFP_D_PIN_ASSIGNMENT_D_FLIPPED | + 1 << UFP_D_PIN_ASSIGNMENT_E_NORMAL | + 1 << UFP_D_PIN_ASSIGNMENT_E_FLIPPED ); + +/** + * @} + */ + +/** @defgroup CBTL08GP053_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup CBTL08GP053_Private_Functions + * @{ + */ + +/** + * @brief Initialize the CBTL08GP053 and configure the needed hardware resources. + * @param Address CBTL08GP053 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t cbtl08gp053_Init(uint16_t Address) +{ + uint32_t err_count = 0; + + /* Low level init */ + err_count += MUX_IO_Init(); + + /* Restore CBTL08GP053 registers reset values */ + MUX_IO_Write(Address, CBTL08GP053_REG_SYS_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, 0x01); + MUX_IO_Write(Address, CBTL08GP053_REG_SW_CTRL, 0x00); + + return err_count; +} + + +/** + * @brief Release the hardware resources required to use the CBTL08GP053. + * @param Address CBTL08GP053 address on communication Bus. + * @retval none + */ +void cbtl08gp053_DeInit(uint16_t Address) +{ + /* Restore CBTL08GP053 registers reset values */ + MUX_IO_Write(Address, CBTL08GP053_REG_SYS_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, 0x00); + MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, 0x01); + MUX_IO_Write(Address, CBTL08GP053_REG_SW_CTRL, 0x00); + + /* Low level de-init */ + MUX_IO_DeInit(); +} + +/** + * @brief Power on the CBTL08GP053. + * @param Address CBTL08GP053 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t cbtl08gp053_PowerOn(uint16_t Address) +{ + uint32_t err_count = 0; + + /* Set SYS_CTRL.SWTICH_EN bit */ + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_SYS_CTRL, CBTL08GP053_REG_SYS_CTRL_SWITCH_EN); + + return err_count; +} + +/** + * @brief Power down the CBTL08GP053. + * @param Address CBTL08GP053 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t cbtl08gp053_PowerOff(uint16_t Address) +{ + uint32_t err_count = 0; + + /* Clear SYS_CTRL.SWTICH_EN bit */ + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_SYS_CTRL, 0x00); + + return err_count; +} + +/** + * @brief Configure the CBTL08GP053 according to the requested USB Type-C + * connector pin assignment. + * @param Address CBTL08GP053 address on communication Bus. + * @param Mode USB Type-C connector pin assignment + * @retval 0: success, else error + */ +uint32_t cbtl08gp053_SetMode(uint16_t Address, TYPECSWITCH_Mode_t Mode) +{ + uint32_t err_count = 0; + uint8_t sw_ctrl = (CBTL08GP053_REG_SW_X5_SET | + CBTL08GP053_REG_SW_OP1_SET | + CBTL08GP053_REG_SW_OP2_SET | + CBTL08GP053_REG_SW_OP3_SET | + CBTL08GP053_REG_SW_OP4_SET | + CBTL08GP053_REG_SW_OP5_SET); + + /* Transition to safe mode prior updating cross switch configuration */ + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, 0x00); + + /* Configure cross switch */ + switch(Mode) + { + case USB_NORMAL: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP1); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP4); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, 0x00); + break; + case USB_FLIPPED: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP1); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP4); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, 0x00); + break; + case DFP_D_PIN_ASSIGNMENT_C_NORMAL: + case DFP_D_PIN_ASSIGNMENT_E_NORMAL: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP2); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP5); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_PASS); + break; + case DFP_D_PIN_ASSIGNMENT_C_FLIPPED: + case DFP_D_PIN_ASSIGNMENT_E_FLIPPED: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP2); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP5); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_CROSS); + break; + case DFP_D_PIN_ASSIGNMENT_D_NORMAL: + case DFP_D_PIN_ASSIGNMENT_F_NORMAL: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP1); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP4); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_PASS); + break; + case DFP_D_PIN_ASSIGNMENT_D_FLIPPED: + case DFP_D_PIN_ASSIGNMENT_F_FLIPPED: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP1); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP4); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_CROSS); + break; + case UFP_D_PIN_ASSIGNMENT_C_NORMAL: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP2); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP5); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_CROSS); + break; + case UFP_D_PIN_ASSIGNMENT_C_FLIPPED: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP2); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP5); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_PASS); + break; + case UFP_D_PIN_ASSIGNMENT_D_NORMAL: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP1); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP4); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_CROSS); + break; + case UFP_D_PIN_ASSIGNMENT_D_FLIPPED: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP1); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP4); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_PASS); + break; + case UFP_D_PIN_ASSIGNMENT_E_NORMAL: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP2); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP5); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_CROSS); + break; + case UFP_D_PIN_ASSIGNMENT_E_FLIPPED: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, CBTL08GP053_REG_OP1_CTRL_EN_IP3); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, CBTL08GP053_REG_OP2_CTRL_EN_IP2); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, CBTL08GP053_REG_OP3_CTRL_EN_IP6); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, CBTL08GP053_REG_OP4_CTRL_EN_IP5); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, CBTL08GP053_REG_OP5_CTRL_EN_IP7); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, CBTL08GP053_REG_CROSS5_PASS); + break; + default: + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP1_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP2_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP3_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP4_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_OP5_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_CROSS5_CTRL, 0x00); + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_SW_CTRL, sw_ctrl); + break; + } + + /* Enable cross switch configuration */ + err_count += MUX_IO_Write(Address, CBTL08GP053_REG_SW_CTRL, sw_ctrl); + + return err_count; +} + +/** + * @brief Indicate whether the requested USB Type-C connector pin assignment + * is supported by the CBTL08GP053. + * @param Mode USB Type-C connector pin assignment + * @retval 0: success, else error + */ +uint32_t cbtl08gp053_IsSupportedMode(TYPECSWITCH_Mode_t Mode) +{ + return (((1 << Mode) & cbtl08gp053_SupportedModes ) == 0) ? 0 : 1; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/cbtl08gp053.h b/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/cbtl08gp053.h new file mode 100644 index 0000000..6e6261d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/cbtl08gp053/cbtl08gp053.h @@ -0,0 +1,369 @@ +/** + ****************************************************************************** + * @file cbtl08gp053.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the CBTL08GP053 + * (Crossbar switch device for USB Type-C systems). + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __CBTL08GP053_H +#define __CBTL08GP053_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include +#include "../Common/usbtypecswitch.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup CBTL08GP053 + * @{ + */ + +#ifdef DBG_BSP_MUX +typedef struct +{ + uint8_t RESERVED1; /*!< Address offset: 0x00 */ + uint8_t SYS_CTRL; /*!< Address offset: 0x01 */ + uint8_t OP1_CTRL; /*!< Address offset: 0x02 */ + uint8_t OP2_CTRL; /*!< Address offset: 0x03 */ + uint8_t OP3_CTRL; /*!< Address offset: 0x04 */ + uint8_t OP4_CTRL; /*!< Address offset: 0x05 */ + uint8_t OP5_CTRL; /*!< Address offset: 0x06 */ + uint8_t CROSS5_CTRL; /*!< Address offset: 0x07 */ + uint8_t SW_CTRL; /*!< Address offset: 0x08 */ + uint8_t REVISION; /*!< Address offset: 0x09 */ +} CBTL08GP053_TypeDef; + +extern CBTL08GP053_TypeDef CBTL08GP053; +#endif /* DBG_BSP_MUX */ + +/** @defgroup CBTL08GP053_Exported_Constants + * @{ + */ +/******************************* Register Map ********************************/ +#define CBTL08GP053_REG_SYS_CTRL 0x01 /*!< */ +#define CBTL08GP053_REG_OP1_CTRL 0x02 /*!< */ +#define CBTL08GP053_REG_OP2_CTRL 0x03 /*!< */ +#define CBTL08GP053_REG_OP3_CTRL 0x04 /*!< */ +#define CBTL08GP053_REG_OP4_CTRL 0x05 /*!< */ +#define CBTL08GP053_REG_OP5_CTRL 0x06 /*!< */ +#define CBTL08GP053_REG_CROSS5_CTRL 0x07 /*!< */ +#define CBTL08GP053_REG_SW_CTRL 0x08 /*!< */ +#define CBTL08GP053_REG_REVISION 0x09 /*!< */ + +/********************* Bit definition for SYS_CTRL register *****************/ +#define CBTL08GP053_REG_SYS_CTRL_SWITCH_EN_Pos (7U) +#define CBTL08GP053_REG_SYS_CTRL_SWITCH_EN_Msk (0x1U << CBTL08GP053_REG_SYS_CTRL_SWITCH_EN_Pos) /*!< 0x80*/ +#define CBTL08GP053_REG_SYS_CTRL_SWITCH_EN CBTL08GP053_REG_SYS_CTRL_SWITCH_EN_Msk /*!< */ + +/********************* Bit definition for OP1_CTRL register *****************/ +#define CBTL08GP053_REG_OP1_CTRL_EN_IP1_Pos (0U) +#define CBTL08GP053_REG_OP1_CTRL_EN_IP1_Msk (0x1U << CBTL08GP053_REG_OP1_CTRL_EN_IP1_Pos) /*!< 0x01 */ +#define CBTL08GP053_REG_OP1_CTRL_EN_IP1 CBTL08GP053_REG_OP1_CTRL_EN_IP1_Msk /*!< */ +#define CBTL08GP053_REG_OP1_CTRL_EN_IP2_Pos (1U) +#define CBTL08GP053_REG_OP1_CTRL_EN_IP2_Msk (0x1U << CBTL08GP053_REG_OP1_CTRL_EN_IP2_Pos) /*!< 0x02 */ +#define CBTL08GP053_REG_OP1_CTRL_EN_IP2 CBTL08GP053_REG_OP1_CTRL_EN_IP2_Msk /*!< */ +#define CBTL08GP053_REG_OP1_CTRL_EN_IP3_Pos (2U) +#define CBTL08GP053_REG_OP1_CTRL_EN_IP3_Msk (0x1U << CBTL08GP053_REG_OP1_CTRL_EN_IP3_Pos) /*!< 0x04 */ +#define CBTL08GP053_REG_OP1_CTRL_EN_IP3 CBTL08GP053_REG_OP1_CTRL_EN_IP3_Msk /*!< */ + +/********************* Bit definition for OP2_CTRL register *****************/ +#define CBTL08GP053_REG_OP2_CTRL_EN_IP1_Pos (0U) +#define CBTL08GP053_REG_OP2_CTRL_EN_IP1_Msk (0x1U << CBTL08GP053_REG_OP2_CTRL_EN_IP1_Pos) /*!< 0x01 */ +#define CBTL08GP053_REG_OP2_CTRL_EN_IP1 CBTL08GP053_REG_OP2_CTRL_EN_IP1_Msk /*!< */ +#define CBTL08GP053_REG_OP2_CTRL_EN_IP2_Pos (1U) +#define CBTL08GP053_REG_OP2_CTRL_EN_IP2_Msk (0x1U << CBTL08GP053_REG_OP2_CTRL_EN_IP2_Pos) /*!< 0x02 */ +#define CBTL08GP053_REG_OP2_CTRL_EN_IP2 CBTL08GP053_REG_OP2_CTRL_EN_IP2_Msk /*!< */ +#define CBTL08GP053_REG_OP2_CTRL_EN_IP3_Pos (2U) +#define CBTL08GP053_REG_OP2_CTRL_EN_IP3_Msk (0x1U << CBTL08GP053_REG_OP2_CTRL_EN_IP3_Pos) /*!< 0x04 */ +#define CBTL08GP053_REG_OP2_CTRL_EN_IP3 CBTL08GP053_REG_OP2_CTRL_EN_IP3_Msk /*!< */ + +/********************* Bit definition for OP3_CTRL register *****************/ +#define CBTL08GP053_REG_OP3_CTRL_EN_IP4_Pos (3U) +#define CBTL08GP053_REG_OP3_CTRL_EN_IP4_Msk (0x1U << CBTL08GP053_REG_OP3_CTRL_EN_IP4_Pos) /*!< 0x08 */ +#define CBTL08GP053_REG_OP3_CTRL_EN_IP4 CBTL08GP053_REG_OP3_CTRL_EN_IP4_Msk /*!< */ +#define CBTL08GP053_REG_OP3_CTRL_EN_IP5_Pos (4U) +#define CBTL08GP053_REG_OP3_CTRL_EN_IP5_Msk (0x1U << CBTL08GP053_REG_OP3_CTRL_EN_IP5_Pos) /*!< 0x10 */ +#define CBTL08GP053_REG_OP3_CTRL_EN_IP5 CBTL08GP053_REG_OP3_CTRL_EN_IP5_Msk /*!< */ +#define CBTL08GP053_REG_OP3_CTRL_EN_IP6_Pos (5U) +#define CBTL08GP053_REG_OP3_CTRL_EN_IP6_Msk (0x1U << CBTL08GP053_REG_OP3_CTRL_EN_IP6_Pos) /*!< 0x20 */ +#define CBTL08GP053_REG_OP3_CTRL_EN_IP6 CBTL08GP053_REG_OP3_CTRL_EN_IP6_Msk /*!< */ + +/********************* Bit definition for OP4_CTRL register *****************/ +#define CBTL08GP053_REG_OP4_CTRL_EN_IP4_Pos (3U) +#define CBTL08GP053_REG_OP4_CTRL_EN_IP4_Msk (0x1U << CBTL08GP053_REG_OP4_CTRL_EN_IP4_Pos) /*!< 0x08 */ +#define CBTL08GP053_REG_OP4_CTRL_EN_IP4 CBTL08GP053_REG_OP4_CTRL_EN_IP4_Msk /*!< */ +#define CBTL08GP053_REG_OP4_CTRL_EN_IP5_Pos (4U) +#define CBTL08GP053_REG_OP4_CTRL_EN_IP5_Msk (0x1U << CBTL08GP053_REG_OP4_CTRL_EN_IP5_Pos) /*!< 0x10 */ +#define CBTL08GP053_REG_OP4_CTRL_EN_IP5 CBTL08GP053_REG_OP4_CTRL_EN_IP5_Msk /*!< */ +#define CBTL08GP053_REG_OP4_CTRL_EN_IP6_Pos (5U) +#define CBTL08GP053_REG_OP4_CTRL_EN_IP6_Msk (0x1U << CBTL08GP053_REG_OP4_CTRL_EN_IP6_Pos) /*!< 0x20 */ +#define CBTL08GP053_REG_OP4_CTRL_EN_IP6 CBTL08GP053_REG_OP4_CTRL_EN_IP6_Msk /*!< */ + +/********************* Bit definition for OP5_CTRL register *****************/ +#define CBTL08GP053_REG_OP5_CTRL_EN_IP7_Pos (6U) +#define CBTL08GP053_REG_OP5_CTRL_EN_IP7_Msk (0x1U << CBTL08GP053_REG_OP5_CTRL_EN_IP7_Pos) /*!< 0x40 */ +#define CBTL08GP053_REG_OP5_CTRL_EN_IP7 CBTL08GP053_REG_OP5_CTRL_EN_IP7_Msk /*!< */ +#define CBTL08GP053_REG_OP5_CTRL_EN_IP8_Pos (7U) +#define CBTL08GP053_REG_OP5_CTRL_EN_IP8_Msk (0x1U << CBTL08GP053_REG_OP5_CTRL_EN_IP8_Pos) /*!< 0x80 */ +#define CBTL08GP053_REG_OP5_CTRL_EN_IP8 CBTL08GP053_REG_OP5_CTRL_EN_IP8_Msk /*!< */ + +/****************** Bit definition for CROSS5_CTRL register *****************/ +#define CBTL08GP053_REG_CROSS5_PASS_Pos (0U) +#define CBTL08GP053_REG_CROSS5_PASS_Msk (0x1U << CBTL08GP053_REG_CROSS5_PASS_Pos) /*!< 0x01 */ +#define CBTL08GP053_REG_CROSS5_PASS CBTL08GP053_REG_CROSS5_PASS_Msk /*!< */ +#define CBTL08GP053_REG_CROSS5_CROSS_Pos (1U) +#define CBTL08GP053_REG_CROSS5_CROSS_Msk (0x1U << CBTL08GP053_REG_CROSS5_CROSS_Pos) /*!< 0x02 */ +#define CBTL08GP053_REG_CROSS5_CROSS CBTL08GP053_REG_CROSS5_CROSS_Msk /*!< */ + +/******************* Bit definition for SW_CTRL register ********************/ +#define CBTL08GP053_REG_SW_OP1_SET_Pos (0U) +#define CBTL08GP053_REG_SW_OP1_SET_Msk (0x1U << CBTL08GP053_REG_SW_OP1_SET_Pos) /*!< 0x01 */ +#define CBTL08GP053_REG_SW_OP1_SET CBTL08GP053_REG_SW_OP1_SET_Msk /*!< */ +#define CBTL08GP053_REG_SW_OP2_SET_Pos (1U) +#define CBTL08GP053_REG_SW_OP2_SET_Msk (0x1U << CBTL08GP053_REG_SW_OP2_SET_Pos) /*!< 0x02 */ +#define CBTL08GP053_REG_SW_OP2_SET CBTL08GP053_REG_SW_OP2_SET_Msk /*!< */ +#define CBTL08GP053_REG_SW_OP3_SET_Pos (2U) +#define CBTL08GP053_REG_SW_OP3_SET_Msk (0x1U << CBTL08GP053_REG_SW_OP3_SET_Pos) /*!< 0x04 */ +#define CBTL08GP053_REG_SW_OP3_SET CBTL08GP053_REG_SW_OP3_SET_Msk /*!< */ +#define CBTL08GP053_REG_SW_OP4_SET_Pos (3U) +#define CBTL08GP053_REG_SW_OP4_SET_Msk (0x1U << CBTL08GP053_REG_SW_OP4_SET_Pos) /*!< 0x08 */ +#define CBTL08GP053_REG_SW_OP4_SET CBTL08GP053_REG_SW_OP4_SET_Msk /*!< */ +#define CBTL08GP053_REG_SW_OP5_SET_Pos (4U) +#define CBTL08GP053_REG_SW_OP5_SET_Msk (0x1U << CBTL08GP053_REG_SW_OP5_SET_Pos) /*!< 0x10 */ +#define CBTL08GP053_REG_SW_OP5_SET CBTL08GP053_REG_SW_OP5_SET_Msk /*!< */ +#define CBTL08GP053_REG_SW_X5_SET_Pos (5U) +#define CBTL08GP053_REG_SW_X5_SET_Msk (0x1U << CBTL08GP053_REG_SW_X5_SET_Pos) /*!< 0x20 */ +#define CBTL08GP053_REG_SW_X5_SET CBTL08GP053_REG_SW_X5_SET_Msk /*!< */ + +/******************** Bit definition for REVISION register ******************/ +#define CBTL08GP053_REVISION_REV_ID_Pos (0U) +#define CBTL08GP053_REVISION_REV_ID_Msk (0xFFU << CBTL08GP053_REVISION_REV_ID_Pos) /*!< 0xFF */ +#define CBTL08GP053_REVISION_REV_ID CBTL08GP053_REVISION_REV_ID_Msk /*!< */ + +/** @defgroup CBTL08GP053_DisplayPort_Alternate_Mode + * @{ + */ +#define CBTL08GP053_DP_ALTMODE_DFP_D_C_E_NORMAL 0x00U +#define CBTL08GP053_DP_ALTMODE_DFP_D_C_E_FLIPPED 0x01U +#define CBTL08GP053_DP_ALTMODE_DFP_D_D_F_NORMAL 0x02U +#define CBTL08GP053_DP_ALTMODE_DFP_D_D_F_FLIPPED 0x03U +#define CBTL08GP053_DP_ALTMODE_UFP_D_C_NORMAL 0x04U +#define CBTL08GP053_DP_ALTMODE_UFP_D_C_FLIPPED 0x05U +#define CBTL08GP053_DP_ALTMODE_UFP_D_D_NORMAL 0x06U +#define CBTL08GP053_DP_ALTMODE_UFP_D_D_FLIPPED 0x07U +#define CBTL08GP053_DP_ALTMODE_UFP_D_E_NORMAL 0x08U +#define CBTL08GP053_DP_ALTMODE_UFP_D_E_FLIPPED 0x09U +/** + * @} + */ + +/** @defgroup CBTL08GP053_DisplayPort_Standby_Mode + * @{ + */ +#define CBTL08GP053_DP_STANDBYMODE_SAFE 0x00U +#define CBTL08GP053_DP_STANDBYMODE_USB3_NORMAL 0x01U +#define CBTL08GP053_DP_STANDBYMODE_USB3_FLIPPED 0x02U + +/** + * @} + */ + +/** + * @} + */ + +#if defined(CBTL08GP053_DEBUG) +/** @defgroup CBTL08GP053_Exported_Structure CBTL08GP053 Exported Structure + * @{ + */ + +typedef union { + uint8_t Register; + struct { + uint8_t RESERVED :7; + uint8_t SWITCH_EN :1; + }; +} CBTL08GP053_SysCtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t IP1 :1; + uint8_t IP2 :1; + uint8_t IP3 :1; + uint8_t RESERVED :5; + }; +} CBTL08GP053_Op1CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t IP1 :1; + uint8_t IP2 :1; + uint8_t IP3 :1; + uint8_t RESERVED :5; + }; +} CBTL08GP053_Op2CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RESERVED1 :3; + uint8_t IP4 :1; + uint8_t IP5 :1; + uint8_t IP6 :1; + uint8_t RESERVED2 :2; + }; +} CBTL08GP053_Op3CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RESERVED1 :3; + uint8_t IP4 :1; + uint8_t IP5 :1; + uint8_t IP6 :1; + uint8_t RESERVED2 :2; + }; +} CBTL08GP053_Op4CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RESERVED :6; + uint8_t IP7 :1; + uint8_t IP8 :1; + }; +} CBTL08GP053_Op5CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t PASS :1; + uint8_t CROSS :1; + uint8_t RESERVED :6; + }; +} CBTL08GP053_Cross5CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t OP1_SET :1; + uint8_t OP2_SET :1; + uint8_t OP3_SET :1; + uint8_t OP4_SET :1; + uint8_t OP5_SET :1; + uint8_t X5_SET :1; + uint8_t RESERVED :2; + }; +} CBTL08GP053_SwCtrlTypeDef; + +typedef struct +{ + CBTL08GP053_SysCtrlTypeDef SysCtrl; /*!< SYS_CTRL register (0x01) */ + CBTL08GP053_Op1CtrlTypeDef Op1Ctrl; /*!< OP1_CTRL Registers (0x02) */ + CBTL08GP053_Op2CtrlTypeDef Op2Ctrl; /*!< OP2_CTRL Registers (0x03) */ + CBTL08GP053_Op3CtrlTypeDef Op3Ctrl; /*!< OP3_CTRL Registers (0x04) */ + CBTL08GP053_Op4CtrlTypeDef Op4Ctrl; /*!< OP4_CTRL Registers (0x05) */ + CBTL08GP053_Op5CtrlTypeDef Op5Ctrl; /*!< OP5_CTRL Registers (0x06) */ + CBTL08GP053_Cross5CtrlTypeDef Cross5Ctrl; /*!< CROSS5_CTRL Registers (0x07) */ + CBTL08GP053_SwCtrlTypeDef SwCtrl; /*!< SW_CTRL Registers (0x08) */ + uint8_t Revision; /*!< REVISION Registers (0x09) */ +} CBTL08GP053_RegistersTypeDef; +/** + * @} + */ +#endif /* CBTL08GP053_DEBUG */ + +/** @defgroup CBTL08GP053_Exported_Functions + * @{ + */ +/* USB Type-C Crosspoint Switch management functions */ +uint32_t cbtl08gp053_Init(uint16_t Address); +void cbtl08gp053_DeInit(uint16_t Address); +uint32_t cbtl08gp053_PowerOn(uint16_t Address); +uint32_t cbtl08gp053_PowerOff(uint16_t Address); +uint32_t cbtl08gp053_SetMode(uint16_t Address, TYPECSWITCH_Mode_t Mode); +uint32_t cbtl08gp053_IsSupportedMode(TYPECSWITCH_Mode_t Mode); + +/* MUX IO functions */ +uint8_t MUX_IO_Init(void); +void MUX_IO_DeInit(void); +uint8_t MUX_IO_Write(uint16_t Addr, uint16_t Reg, uint8_t Data); +uint8_t MUX_IO_Read(uint16_t Addr, uint16_t Reg, uint8_t *pData); +uint32_t MUX_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials); + +/** + * @} + */ + +/** @defgroup CBTL08GP053_Exported_Variables + * @{ + */ +/* Type-C Crosspoint Switch Driver */ +extern TYPECSWITCH_Drv_t cbtl08gp053_drv; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus + } +#endif + +#endif /* __CBTL08GP053_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/Release_Notes.html b/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/Release_Notes.html new file mode 100644 index 0000000..e06497e --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/Release_Notes.html @@ -0,0 +1,232 @@ + + + + + +Release Notes for HX8347D Component Drivers + + + + + +
Back to Release page + +
+

License

+This software component is licensed by ST under BSD 3-Clause +license, the "License"; You may not use this component except in +compliance with +the License. You may obtain a copy of the License at: +

https://opensource.org/licenses/BSD-3-Clause

+
+
+
+
+

V1.1.2 / 11-October-2018

+
+
+

Main +Changes

+Fix HardFault issue in +hx8347d_DrawBitmap() +
+
+
+

+
+ +
+
+

For complete +documentation on STM32 Microcontrollers, +visit: www.st.com/STM32

+
+
+
+ \ No newline at end of file diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/hx8347d.c b/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/hx8347d.c new file mode 100644 index 0000000..80299f9 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/hx8347d.c @@ -0,0 +1,485 @@ +/** + ****************************************************************************** + * @file hx8347d.c + * @author MCD Application Team + * @brief This file includes the LCD driver for HX8347D LCD. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "hx8347d.h" + +/** @addtogroup BSP +* @{ +*/ + +/** @addtogroup Components +* @{ +*/ + +/** @addtogroup HX8347D +* @brief This file provides a set of functions needed to drive the +* HX8347D LCD. +* @{ +*/ + +/** @defgroup HX8347D_Private_TypesDefinitions +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup HX8347D_Private_Defines +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup HX8347D_Private_Macros +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup HX8347D_Private_Variables +* @{ +*/ +LCD_DrvTypeDef hx8347d_drv = +{ + hx8347d_Init, + hx8347d_ReadID, + hx8347d_DisplayOn, + hx8347d_DisplayOff, + hx8347d_SetCursor, + hx8347d_WritePixel, + hx8347d_ReadPixel, + hx8347d_SetDisplayWindow, + hx8347d_DrawHLine, + hx8347d_DrawVLine, + hx8347d_GetLcdPixelWidth, + hx8347d_GetLcdPixelHeight, + hx8347d_DrawBitmap, +}; + +static uint8_t Is_hx8347d_Initialized = 0; +static uint16_t ArrayRGB[320] = {0}; + + +/** +* @} +*/ + +/** @defgroup HX8347D_Private_FunctionPrototypes +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup HX8347D_Private_Functions +* @{ +*/ + +/** +* @brief Initialise the HX8347D LCD Component. +* @param None +* @retval None +*/ +void hx8347d_Init(void) +{ + if(Is_hx8347d_Initialized == 0) + { + Is_hx8347d_Initialized = 1; + /* Initialise HX8347D low level bus layer --------------------------------*/ + LCD_IO_Init(); + + /* Driving ability setting */ + hx8347d_WriteReg(LCD_REG_234, 0x00); + hx8347d_WriteReg(LCD_REG_235, 0x20); + hx8347d_WriteReg(LCD_REG_236, 0x0C); + hx8347d_WriteReg(LCD_REG_237, 0xC4); + hx8347d_WriteReg(LCD_REG_232, 0x40); + hx8347d_WriteReg(LCD_REG_233, 0x38); + hx8347d_WriteReg(LCD_REG_241, 0x01); + hx8347d_WriteReg(LCD_REG_242, 0x10); + hx8347d_WriteReg(LCD_REG_39, 0xA3); + + /* Adjust the Gamma Curve */ + hx8347d_WriteReg(LCD_REG_64, 0x01); + hx8347d_WriteReg(LCD_REG_65, 0x00); + hx8347d_WriteReg(LCD_REG_66, 0x00); + hx8347d_WriteReg(LCD_REG_67, 0x10); + hx8347d_WriteReg(LCD_REG_68, 0x0E); + hx8347d_WriteReg(LCD_REG_69, 0x24); + hx8347d_WriteReg(LCD_REG_70, 0x04); + hx8347d_WriteReg(LCD_REG_71, 0x50); + hx8347d_WriteReg(LCD_REG_72, 0x02); + hx8347d_WriteReg(LCD_REG_73, 0x13); + hx8347d_WriteReg(LCD_REG_74, 0x19); + hx8347d_WriteReg(LCD_REG_75, 0x19); + hx8347d_WriteReg(LCD_REG_76, 0x16); + hx8347d_WriteReg(LCD_REG_80, 0x1B); + hx8347d_WriteReg(LCD_REG_81, 0x31); + hx8347d_WriteReg(LCD_REG_82, 0x2F); + hx8347d_WriteReg(LCD_REG_83, 0x3F); + hx8347d_WriteReg(LCD_REG_84, 0x3F); + hx8347d_WriteReg(LCD_REG_85, 0x3E); + hx8347d_WriteReg(LCD_REG_86, 0x2F); + hx8347d_WriteReg(LCD_REG_87, 0x7B); + hx8347d_WriteReg(LCD_REG_88, 0x09); + hx8347d_WriteReg(LCD_REG_89, 0x06); + hx8347d_WriteReg(LCD_REG_90, 0x06); + hx8347d_WriteReg(LCD_REG_91, 0x0C); + hx8347d_WriteReg(LCD_REG_92, 0x1D); + hx8347d_WriteReg(LCD_REG_93, 0xCC); + + /* Power voltage setting */ + hx8347d_WriteReg(LCD_REG_27, 0x1B); + hx8347d_WriteReg(LCD_REG_26, 0x01); + hx8347d_WriteReg(LCD_REG_36, 0x2F); + hx8347d_WriteReg(LCD_REG_37, 0x57); + /*****VCOM offset ****/ + hx8347d_WriteReg(LCD_REG_35, 0x86); + + /* Power on setting up flow */ + hx8347d_WriteReg(LCD_REG_24, 0x36); /* Display frame rate = 70Hz RADJ = '0110' */ + hx8347d_WriteReg(LCD_REG_25, 0x01); /* OSC_EN = 1 */ + hx8347d_WriteReg(LCD_REG_28, 0x06); /* AP[2:0] = 111 */ + hx8347d_WriteReg(LCD_REG_29, 0x06); /* AP[2:0] = 111 */ + hx8347d_WriteReg(LCD_REG_31,0x90); /* GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0*/ + hx8347d_WriteReg(LCD_REG_39, 1); /* REF = 1 */ + + LCD_Delay(10); + /* 262k/65k color selection */ + hx8347d_WriteReg(LCD_REG_23, 0x05); /* default 0x06 262k color, 0x05 65k color */ + /* SET PANEL */ + hx8347d_WriteReg(LCD_REG_54, 0x09); /* SS_PANEL = 1, GS_PANEL = 0,REV_PANEL = 0, BGR_PANEL = 1 */ + + /* Display ON flow */ + hx8347d_WriteReg(LCD_REG_40, 0x38); /* GON=1, DTE=1, D=10 */ + LCD_Delay(60); + hx8347d_WriteReg(LCD_REG_40, 0x3C); /* GON=1, DTE=1, D=11 */ + + /* Set GRAM Area - Partial Display Control */ + hx8347d_WriteReg(LCD_REG_1, 0x00); /* DP_STB = 0, DP_STB_S = 0, SCROLL = 0, */ + hx8347d_WriteReg(LCD_REG_2, 0x00); /* Column address start 2 */ + hx8347d_WriteReg(LCD_REG_3, 0x00); /* Column address start 1 */ + hx8347d_WriteReg(LCD_REG_4, 0x01); /* Column address end 2 */ + hx8347d_WriteReg(LCD_REG_5, 0x3F); /* Column address end 1 */ + hx8347d_WriteReg(LCD_REG_6, 0x00); /* Row address start 2 */ + hx8347d_WriteReg(LCD_REG_7, 0x00); /* Row address start 2 */ + hx8347d_WriteReg(LCD_REG_8, 0x00); /* Row address end 2 */ + hx8347d_WriteReg(LCD_REG_9, 0xEF); /* Row address end 1 */ + hx8347d_WriteReg(LCD_REG_22, 0xE0); /* Memory access control: MY = 1, MX = 0, MV = 1, ML = 0 */ + } + /* Set the Cursor */ + hx8347d_SetCursor(0, 0); + + /* Prepare to write GRAM */ + LCD_IO_WriteReg(LCD_REG_34); +} + +/** +* @brief Enables the Display. +* @param None +* @retval None +*/ +void hx8347d_DisplayOn(void) +{ + /* Power On sequence ---------------------------------------------------------*/ + hx8347d_WriteReg(LCD_REG_24, 0x36); /* Display frame rate = 70Hz RADJ = '0110' */ + hx8347d_WriteReg(LCD_REG_25, 0x01); /* OSC_EN = 1 */ + hx8347d_WriteReg(LCD_REG_28, 0x06); /* AP[2:0] = 111 */ + hx8347d_WriteReg(LCD_REG_31,0x90); /* GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0*/ + LCD_Delay(10); + /* 262k/65k color selection */ + hx8347d_WriteReg(LCD_REG_23, 0x05); /* default 0x06 262k color, 0x05 65k color */ + /* SET PANEL */ + hx8347d_WriteReg(LCD_REG_54, 0x09); /* SS_PANEL = 1, GS_PANEL = 0,REV_PANEL = 0, BGR_PANEL = 1 */ + + /* Display On */ + hx8347d_WriteReg(LCD_REG_40, 0x38); + LCD_Delay(60); + hx8347d_WriteReg(LCD_REG_40, 0x3C); +} + +/** +* @brief Disables the Display. +* @param None +* @retval None +*/ +void hx8347d_DisplayOff(void) +{ + /* Power Off sequence ---------------------------------------------------------*/ + hx8347d_WriteReg(LCD_REG_23, 0x0000); /* default 0x06 262k color, 0x05 65k color */ + hx8347d_WriteReg(LCD_REG_24, 0x0000); /* Display frame rate = 70Hz RADJ = '0110' */ + hx8347d_WriteReg(LCD_REG_25, 0x0000); /* OSC_EN = 1 */ + hx8347d_WriteReg(LCD_REG_28, 0x0000); /* AP[2:0] = 111 */ + hx8347d_WriteReg(LCD_REG_31, 0x0000); /* GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0*/ + hx8347d_WriteReg(LCD_REG_54, 0x0000); /* SS_PANEL = 1, GS_PANEL = 0,REV_PANEL = 0, BGR_PANEL = 1 */ + + /* Display Off */ + hx8347d_WriteReg(LCD_REG_40, 0x38); + LCD_Delay(60); + hx8347d_WriteReg(LCD_REG_40, 0x04); +} + +/** +* @brief Get the LCD pixel Width. +* @param None +* @retval The Lcd Pixel Width +*/ +uint16_t hx8347d_GetLcdPixelWidth(void) +{ + return (uint16_t)HX8347D_LCD_PIXEL_WIDTH; +} + +/** +* @brief Get the LCD pixel Height. +* @param None +* @retval The Lcd Pixel Height +*/ +uint16_t hx8347d_GetLcdPixelHeight(void) +{ + return (uint16_t)HX8347D_LCD_PIXEL_HEIGHT; +} + +/** +* @brief Get the HX8347D ID. +* @param None +* @retval The HX8347D ID +*/ +uint16_t hx8347d_ReadID(void) +{ + if(Is_hx8347d_Initialized == 0) + { + hx8347d_Init(); + Is_hx8347d_Initialized = 1; + } + return (hx8347d_ReadReg(0x00)); +} + +/** +* @brief Set Cursor position. +* @param Xpos: specifies the X position. +* @param Ypos: specifies the Y position. +* @retval None +*/ +void hx8347d_SetCursor(uint16_t Xpos, uint16_t Ypos) +{ + hx8347d_WriteReg(LCD_REG_6, 0x00); + hx8347d_WriteReg(LCD_REG_7, Xpos); + hx8347d_WriteReg(LCD_REG_2, Ypos >> 8); + hx8347d_WriteReg(LCD_REG_3, Ypos & 0xFF); +} + +/** +* @brief Write pixel. +* @param Xpos: specifies the X position. +* @param Ypos: specifies the Y position. +* @param RGBCode: the RGB pixel color +* @retval None +*/ +void hx8347d_WritePixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGBCode) +{ + /* Set Cursor */ + hx8347d_SetCursor(Xpos, Ypos); + + /* Prepare to write GRAM */ + LCD_IO_WriteReg(LCD_REG_34); + + /* Write 16-bit GRAM Reg */ + LCD_IO_WriteMultipleData((uint8_t*)&RGBCode, 2); +} + +/** +* @brief Read pixel. +* @param None +* @retval the RGB pixel color +*/ +uint16_t hx8347d_ReadPixel(uint16_t Xpos, uint16_t Ypos) +{ + /* Set Cursor */ + hx8347d_SetCursor(Xpos, Ypos); + + /* Dummy read */ + LCD_IO_ReadData(LCD_REG_34); + + /* Read 16-bit Reg */ + return (LCD_IO_ReadData(LCD_REG_34)); +} + +/** +* @brief Writes to the selected LCD register. +* @param LCDReg: address of the selected register. +* @param LCDRegValue: value to write to the selected register. +* @retval None +*/ +void hx8347d_WriteReg(uint8_t LCDReg, uint16_t LCDRegValue) +{ + LCD_IO_WriteReg(LCDReg); + + /* Write 16-bit GRAM Reg */ + LCD_IO_WriteMultipleData((uint8_t*)&LCDRegValue, 2); +} + +/** +* @brief Reads the selected LCD Register. +* @param LCDReg: address of the selected register. +* @retval LCD Register Value. +*/ +uint16_t hx8347d_ReadReg(uint8_t LCDReg) +{ + /* Read 16-bit Reg */ + return (LCD_IO_ReadData(LCDReg)); +} + +/** +* @brief Sets a display window +* @param Xpos: specifies the X bottom left position. +* @param Ypos: specifies the Y bottom left position. +* @param Height: display window height. +* @param Width: display window width. +* @retval None +*/ +void hx8347d_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height) +{ + /* Horizontal GRAM Start Address */ + hx8347d_WriteReg(LCD_REG_6, (Xpos) >> 8); /* SP */ + hx8347d_WriteReg(LCD_REG_7, (Xpos) & 0xFF); /* SP */ + + /* Horizontal GRAM End Address */ + hx8347d_WriteReg(LCD_REG_8, (Xpos + Height - 1) >> 8); /* EP */ + hx8347d_WriteReg(LCD_REG_9, (Xpos + Height - 1) & 0xFF); /* EP */ + + /* Vertical GRAM Start Address */ + hx8347d_WriteReg(LCD_REG_2, (Ypos) >> 8); /* SC */ + hx8347d_WriteReg(LCD_REG_3, (Ypos) & 0xFF); /* SC */ + + /* Vertical GRAM End Address */ + hx8347d_WriteReg(LCD_REG_4, (Ypos + Width - 1) >> 8); /* EC */ + hx8347d_WriteReg(LCD_REG_5, (Ypos + Width - 1) & 0xFF); /* EC */ +} + +/** +* @brief Draw vertical line. +* @param RGBCode: Specifies the RGB color +* @param Xpos: specifies the X position. +* @param Ypos: specifies the Y position. +* @param Length: specifies the Line length. +* @retval None +*/ +void hx8347d_DrawHLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length) +{ + uint32_t i = 0; + + /* Set Cursor */ + hx8347d_SetCursor(Xpos, Ypos); + + /* Prepare to write GRAM */ + LCD_IO_WriteReg(LCD_REG_34); + + + /* Sent a complete line */ + for(i = 0; i < Length; i++) + { + ArrayRGB[i] = RGBCode; + } + + LCD_IO_WriteMultipleData((uint8_t*)&ArrayRGB[0], Length * 2); +} + +/** +* @brief Draw vertical line. +* @param RGBCode: Specifies the RGB color +* @param Xpos: specifies the X position. +* @param Ypos: specifies the Y position. +* @param Length: specifies the Line length. +* @retval None +*/ +void hx8347d_DrawVLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length) +{ + uint16_t counter = 0; + + /* Set Cursor */ + hx8347d_SetCursor(Xpos, Ypos); + /* Prepare to write GRAM */ + LCD_IO_WriteReg(LCD_REG_34); + + /* Fill a complete vertical line */ + for(counter = 0; counter < Length; counter++) + { + ArrayRGB[counter] = RGBCode; + } + + /* Write 16-bit GRAM Reg */ + LCD_IO_WriteMultipleData((uint8_t*)&ArrayRGB[0], Length * 2); +} + +/** +* @brief Displays a bitmap picture loaded in the internal Flash. +* @param BmpAddress: Bmp picture address in the internal Flash. +* @retval None +*/ +void hx8347d_DrawBitmap(uint16_t Xpos, uint16_t Ypos, uint8_t *pbmp) +{ + uint32_t index = 0, size = 0; + + /* Read bitmap size */ + size = pbmp[2] + (pbmp[3] << 8) + (pbmp[4] << 16) + (pbmp[5] << 24); + /* Get bitmap data address offset */ + index = pbmp[10] + (pbmp[11] << 8) + (pbmp[12] << 16) + (pbmp[13] << 24); + size = (size - index)/2; + pbmp += index; + + /* Set GRAM write direction and BGR = 0 */ + /* Memory access control: MY = 1, MX = 0, MV = 1, ML = 0 */ + hx8347d_WriteReg(LCD_REG_22, 0xA0); + + /* Set Cursor */ + hx8347d_SetCursor(Xpos, Ypos); + + /* Prepare to write GRAM */ + LCD_IO_WriteReg(LCD_REG_34); + + LCD_IO_WriteMultipleData((uint8_t*)pbmp, size*2); + + /* Set GRAM write direction and BGR = 0 */ + /* Memory access control: MY = 1, MX = 1, MV = 1, ML = 0 */ + hx8347d_WriteReg(LCD_REG_22, 0xE0); +} + +/** +* @} +*/ + +/** +* @} +*/ + +/** +* @} +*/ + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/hx8347d.h b/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/hx8347d.h new file mode 100644 index 0000000..c5ed53d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/hx8347d/hx8347d.h @@ -0,0 +1,259 @@ +/** + ****************************************************************************** + * @file hx8347d.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the hx8347d.c + * driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef HX8347D_H +#define HX8347D_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "../Common/lcd.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup HX8347D + * @{ + */ + +/** @defgroup HX8347D_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup HX8347D_Exported_Constants + * @{ + */ +/** + * @brief HX8347D ID + */ +#define HX8347D_ID 0x0047 + +/** + * @brief HX8347D Size + */ +#define HX8347D_LCD_PIXEL_WIDTH ((uint16_t)320) +#define HX8347D_LCD_PIXEL_HEIGHT ((uint16_t)240) + +/** + * @brief HX8347D Registers + */ +#define LCD_REG_0 0x00 +#define LCD_REG_1 0x01 +#define LCD_REG_2 0x02 +#define LCD_REG_3 0x03 +#define LCD_REG_4 0x04 +#define LCD_REG_5 0x05 +#define LCD_REG_6 0x06 +#define LCD_REG_7 0x07 +#define LCD_REG_8 0x08 +#define LCD_REG_9 0x09 +#define LCD_REG_10 0x0A +#define LCD_REG_12 0x0C +#define LCD_REG_13 0x0D +#define LCD_REG_14 0x0E +#define LCD_REG_15 0x0F +#define LCD_REG_16 0x10 +#define LCD_REG_17 0x11 +#define LCD_REG_18 0x12 +#define LCD_REG_19 0x13 +#define LCD_REG_20 0x14 +#define LCD_REG_21 0x15 +#define LCD_REG_22 0x16 +#define LCD_REG_23 0x17 +#define LCD_REG_24 0x18 +#define LCD_REG_25 0x19 +#define LCD_REG_26 0x1A +#define LCD_REG_27 0x1B +#define LCD_REG_28 0x1C +#define LCD_REG_29 0x1D +#define LCD_REG_30 0x1E +#define LCD_REG_31 0x1F +#define LCD_REG_32 0x20 +#define LCD_REG_33 0x21 +#define LCD_REG_34 0x22 +#define LCD_REG_35 0x23 +#define LCD_REG_36 0x24 +#define LCD_REG_37 0x25 +#define LCD_REG_39 0x27 +#define LCD_REG_40 0x28 +#define LCD_REG_41 0x29 +#define LCD_REG_43 0x2B +#define LCD_REG_45 0x2D +#define LCD_REG_48 0x30 +#define LCD_REG_49 0x31 +#define LCD_REG_50 0x32 +#define LCD_REG_51 0x33 +#define LCD_REG_52 0x34 +#define LCD_REG_53 0x35 +#define LCD_REG_54 0x36 +#define LCD_REG_55 0x37 +#define LCD_REG_56 0x38 +#define LCD_REG_57 0x39 +#define LCD_REG_59 0x3B +#define LCD_REG_60 0x3C +#define LCD_REG_61 0x3D +#define LCD_REG_62 0x3E +#define LCD_REG_63 0x3F +#define LCD_REG_64 0x40 +#define LCD_REG_65 0x41 +#define LCD_REG_66 0x42 +#define LCD_REG_67 0x43 +#define LCD_REG_68 0x44 +#define LCD_REG_69 0x45 +#define LCD_REG_70 0x46 +#define LCD_REG_71 0x47 +#define LCD_REG_72 0x48 +#define LCD_REG_73 0x49 +#define LCD_REG_74 0x4A +#define LCD_REG_75 0x4B +#define LCD_REG_76 0x4C +#define LCD_REG_77 0x4D +#define LCD_REG_78 0x4E +#define LCD_REG_79 0x4F +#define LCD_REG_80 0x50 +#define LCD_REG_81 0x51 +#define LCD_REG_82 0x52 +#define LCD_REG_83 0x53 +#define LCD_REG_84 0x54 +#define LCD_REG_85 0x55 +#define LCD_REG_86 0x56 +#define LCD_REG_87 0x57 +#define LCD_REG_88 0x58 +#define LCD_REG_89 0x59 +#define LCD_REG_90 0x5A +#define LCD_REG_91 0x5B +#define LCD_REG_92 0x5C +#define LCD_REG_93 0x5D +#define LCD_REG_96 0x60 +#define LCD_REG_97 0x61 +#define LCD_REG_106 0x6A +#define LCD_REG_118 0x76 +#define LCD_REG_128 0x80 +#define LCD_REG_129 0x81 +#define LCD_REG_130 0x82 +#define LCD_REG_131 0x83 +#define LCD_REG_132 0x84 +#define LCD_REG_133 0x85 +#define LCD_REG_134 0x86 +#define LCD_REG_135 0x87 +#define LCD_REG_136 0x88 +#define LCD_REG_137 0x89 +#define LCD_REG_139 0x8B +#define LCD_REG_140 0x8C +#define LCD_REG_141 0x8D +#define LCD_REG_143 0x8F +#define LCD_REG_144 0x90 +#define LCD_REG_145 0x91 +#define LCD_REG_146 0x92 +#define LCD_REG_147 0x93 +#define LCD_REG_148 0x94 +#define LCD_REG_149 0x95 +#define LCD_REG_150 0x96 +#define LCD_REG_151 0x97 +#define LCD_REG_152 0x98 +#define LCD_REG_153 0x99 +#define LCD_REG_154 0x9A +#define LCD_REG_157 0x9D +#define LCD_REG_192 0xC0 +#define LCD_REG_193 0xC1 +#define LCD_REG_227 0xE3 +#define LCD_REG_229 0xE5 +#define LCD_REG_231 0xE7 +#define LCD_REG_239 0xEF +#define LCD_REG_232 0xE8 +#define LCD_REG_233 0xE9 +#define LCD_REG_234 0xEA +#define LCD_REG_235 0xEB +#define LCD_REG_236 0xEC +#define LCD_REG_237 0xED +#define LCD_REG_241 0xF1 +#define LCD_REG_242 0xF2 + +/** + * @} + */ + +/** @defgroup HX8347D_Exported_Functions + * @{ + */ +void hx8347d_Init(void); +uint16_t hx8347d_ReadID(void); +void hx8347d_WriteReg(uint8_t LCDReg, uint16_t LCDRegValue); +uint16_t hx8347d_ReadReg(uint8_t LCDReg); + +void hx8347d_DisplayOn(void); +void hx8347d_DisplayOff(void); +void hx8347d_SetCursor(uint16_t Xpos, uint16_t Ypos); +void hx8347d_WritePixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGBCode); +uint16_t hx8347d_ReadPixel(uint16_t Xpos, uint16_t Ypos); + +void hx8347d_DrawHLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length); +void hx8347d_DrawVLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length); +void hx8347d_DrawBitmap(uint16_t Xpos, uint16_t Ypos, uint8_t *pbmp); + +void hx8347d_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height); + + +uint16_t hx8347d_GetLcdPixelWidth(void); +uint16_t hx8347d_GetLcdPixelHeight(void); + +/* LCD driver structure */ +extern LCD_DrvTypeDef hx8347d_drv; + +/* LCD IO functions */ +void LCD_IO_Init(void); +void LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size); +void LCD_IO_WriteReg(uint8_t Reg); +uint16_t LCD_IO_ReadData(uint16_t Reg); +void LCD_Delay (uint32_t delay); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* HX8347D_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/Release_Notes.html b/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/Release_Notes.html new file mode 100644 index 0000000..eb81a0e --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/Release_Notes.html @@ -0,0 +1,74 @@ + + + + + + + Release Notes for SN65DP141 Component Drivers + + + + + +
+
+
+
+
+

Release Notes for SN65DP141 Component Drivers

+

Copyright © 2017 STMicroelectronics
+

+ +
+
+
+

License

+

Licensed by ST under BSD 3-Clause license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:

+

https://opensource.org/licenses/BSD-3-Clause

+

Purpose

+

This directory contains the SN65DP141 component drivers.

+
+
+

Update History

+
+ +
+

Main Changes

+
    +
  • Update release notes format
    • +
  • Correct misspelled words
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Fix compilation warnings detected by IAR V8.30.1
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • First official release of SN65DP141 Component driver
    • +
+
+
+
+
+ + + diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/sn65dp141.c b/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/sn65dp141.c new file mode 100644 index 0000000..a3d90ea --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/sn65dp141.c @@ -0,0 +1,346 @@ +/** + ****************************************************************************** + * @file sn65dp141.c + * @author MCD Application Team + * @brief This file provides a set of functions needed to manage the SN65DP141 + * DisplayPort Linear Redriver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "sn65dp141.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @defgroup SN65DP141 + * @brief This file provides a set of functions needed to drive the + * SN65DP141 DisplayPort Linear Redriver. + * @{ + */ + +/** @defgroup SN65DP141_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup SN65DP141_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup SN65DP141_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SN65DP141_Private_Variables + * @{ + */ + +/* DisplayPort Linear Redriver Driver structure initialization */ +DPREDRIVER_Drv_t sn65dp141_drv = +{ + sn65dp141_Init, + sn65dp141_DeInit, + sn65dp141_PowerOn, + sn65dp141_PowerOff, + sn65dp141_SetEQGain, + sn65dp141_EnableChannel, + sn65dp141_DisableChannel +}; + +/** + * @} + */ + +/** @defgroup SN65DP141_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SN65DP141_Private_Functions + * @{ + */ + +/** + * @brief Initialize the SN65DP141 and configure the needed hardware resources. + * @param Address Device address on communication Bus. + * @retval None + */ +uint32_t sn65dp141_Init(uint16_t Address) +{ + uint32_t err_count = 0; + + /* Low level init */ + err_count += MUX_IO_Init(); + + /* Restore SN65DP141 registers reset values */ + err_count += MUX_IO_Write(Address, SN65DP141_REG_CFG, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CHEN, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH0_CFG, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH0_EN, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH1_CFG, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH1_EN, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH2_CFG, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH2_EN, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH3_CFG, 0x00); + err_count += MUX_IO_Write(Address, SN65DP141_REG_CH3_EN, 0x00); + + return err_count; +} + +/** + * @brief Release the hardware resources required to use the SN65DP141 + * @param Address SN65DP141 address on communication Bus. + * @retval none + */ +void sn65dp141_DeInit(uint16_t Address) +{ + /* Restore SN65DP141 registers reset values */ + MUX_IO_Write(Address, SN65DP141_REG_CFG, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CHEN, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH0_CFG, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH0_EN, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH1_CFG, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH1_EN, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH2_CFG, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH2_EN, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH3_CFG, 0x00); + MUX_IO_Write(Address, SN65DP141_REG_CH3_EN, 0x00); + + /* Low level de-init */ + MUX_IO_DeInit(); +} + +/** + * @brief Power on the SN65DP141. + * @param Address SN65DP141 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t sn65dp141_PowerOn(uint16_t Address) +{ + uint32_t err_count = 0; + uint8_t cfg; + + /* Read General Device Settings register*/ + err_count += MUX_IO_Read(Address, SN65DP141_REG_CFG, &cfg); + + /* Clear PWRDOWN bit of General Device Settings register */ + cfg &= ~SN65DP141_REG_CFG_PWRDOWN; + err_count += MUX_IO_Write(Address, SN65DP141_REG_CFG, cfg); + + return err_count; +} + +/** + * @brief Power down the SN65DP141. + * @param Address SN65DP141 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t sn65dp141_PowerOff(uint16_t Address) +{ + uint32_t err_count = 0; + uint8_t cfg; + + /* Read General Device Settings register*/ + err_count += MUX_IO_Read(Address, SN65DP141_REG_CFG, &cfg); + + /* Set PWRDOWN bit of General Device Settings register */ + cfg |= SN65DP141_REG_CFG_PWRDOWN; + err_count += MUX_IO_Write(Address, SN65DP141_REG_CFG, cfg); + + return err_count; +} + +/** + * @brief Set the equalizer gain for a given channel. + * @param Address SN65DP141 address on communication Bus. + * @param ChannelId Channel identifier. + * This parameter can be take one of the following values: + * CHANNEL_DP0 + * CHANNEL_DP1 + * CHANNEL_DP2 + * CHANNEL_DP3 + * @param EQGain Equalizer gain. + * This parameter must be a value between 0x00 and 0x07. + * @retval 0: successful, else failed + */ +uint32_t sn65dp141_SetEQGain(uint16_t Address, + DPREDRIVER_ChannelId_t ChannelId, + uint8_t EQGain) +{ + uint32_t err_count = 0; + uint8_t chctrl; + uint8_t cfg; + + switch(ChannelId) + { + case CHANNEL_DP0: + cfg = SN65DP141_REG_CH0_CFG; + break; + case CHANNEL_DP1: + cfg = SN65DP141_REG_CH1_CFG; + break; + case CHANNEL_DP2: + cfg = SN65DP141_REG_CH2_CFG; + break; + case CHANNEL_DP3: + cfg = SN65DP141_REG_CH3_CFG; + break; + default: + cfg = SN65DP141_REG_CH0_CFG; + break; + } + + /* Read Channel x Control Settings register */ + err_count += MUX_IO_Read(Address, cfg, &chctrl); + + /* Set the equalizer gain bit field (EQ setting) for concerned channel */ + chctrl = (chctrl & (~(uint8_t)SN65DP141_REG_CHxCFG_EQ_SETTING_Msk)) | (EQGain << SN65DP141_REG_CHxCFG_EQ_SETTING_Pos); + + /* Enable Max gain for TX & RX */ + chctrl |= SN65DP141_REG_CHxCFG_RX_GAIN_1 | SN65DP141_REG_CHxCFG_EQ_DC_GAIN | SN65DP141_REG_CHxCFG_TX_GAIN; + + /* Update Channel x Control Settings register */ + err_count += MUX_IO_Write(Address, cfg, chctrl); + + return err_count; +} + +/** + * @brief Enable a DP channel. + * @param Address SN65DP141 address on communication Bus. + * @param ChannelId Channel identifier. + * This parameter can be take one of the following values: + * CHANNEL_DP0 + * CHANNEL_DP1 + * CHANNEL_DP2 + * CHANNEL_DP3 + * @retval 0: successful, else failed + */ +uint32_t sn65dp141_EnableChannel(uint16_t Address, + DPREDRIVER_ChannelId_t ChannelId) +{ + uint32_t err_count = 0; + uint8_t chen; + + /* Read Channel Enable register */ + err_count += MUX_IO_Read(Address, SN65DP141_REG_CHEN, &chen); + + /* Clear LN_EN_CHx bit of Channel Enable register */ + switch(ChannelId) + { + case CHANNEL_DP0: + chen &= ~SN65DP141_REG_CHEN_LN_EN_CH0; + break; + case CHANNEL_DP1: + chen &= ~SN65DP141_REG_CHEN_LN_EN_CH1; + break; + case CHANNEL_DP2: + chen &= ~SN65DP141_REG_CHEN_LN_EN_CH2; + break; + case CHANNEL_DP3: + chen &= ~SN65DP141_REG_CHEN_LN_EN_CH3; + break; + default: + /* Nothing to do */ + break; + } + + err_count += MUX_IO_Write(Address, SN65DP141_REG_CHEN, chen); + + return err_count; +} + +/** + * @brief Disable a DP channel. + * @param Address SN65DP141 address on communication Bus. + * @param ChannelId Channel identifier. + * This parameter can be take one of the following values: + * CHANNEL_DP0 + * CHANNEL_DP1 + * CHANNEL_DP2 + * CHANNEL_DP3 + * @retval 0: successful, else failed + */ +uint32_t sn65dp141_DisableChannel(uint16_t Address, + DPREDRIVER_ChannelId_t ChannelId) +{ + uint32_t err_count = 0; + uint8_t chen; + + /* Read Channel Enable register */ + err_count += MUX_IO_Read(Address, SN65DP141_REG_CHEN, &chen); + + /* Set LN_EN_CHx bit of Channel Enable register */ + switch(ChannelId) + { + case CHANNEL_DP0: + chen |= SN65DP141_REG_CHEN_LN_EN_CH0; + break; + case CHANNEL_DP1: + chen |= SN65DP141_REG_CHEN_LN_EN_CH1; + break; + case CHANNEL_DP2: + chen |= SN65DP141_REG_CHEN_LN_EN_CH2; + break; + case CHANNEL_DP3: + chen |= SN65DP141_REG_CHEN_LN_EN_CH3; + break; + default: + /* Nothing to do */ + break; + } + + err_count += MUX_IO_Write(Address, SN65DP141_REG_CHEN, chen); + + return err_count; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/sn65dp141.h b/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/sn65dp141.h new file mode 100644 index 0000000..1a05c01 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/sn65dp141/sn65dp141.h @@ -0,0 +1,395 @@ +/** + ****************************************************************************** + * @file sn65dp141.h + * @author MCD Application Team + * @brief Header for sn65dp141.h module + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef SN65DP141_H +#define SN65DP141_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include +#include "../Common/dpredriver.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup SN65DP141 + * @{ + */ + +/** @defgroup SN65DP141_Exported_Constants + * @{ + */ +/******************************* Register Map ********************************/ +#define SN65DP141_REG_CFG 0x00 /*!< General Device Settings register */ +#define SN65DP141_REG_CHEN 0x01 /*!< Channel Enable register */ +#define SN65DP141_REG_CH0_CFG 0x02 /*!< Channel 0 Control Settings register */ +#define SN65DP141_REG_CH0_EN 0x03 /*!< Channel 0 Enable Settings register */ +#define SN65DP141_REG_CH1_CFG 0x05 /*!< Channel 1 Control Settings register */ +#define SN65DP141_REG_CH1_EN 0x06 /*!< Channel 1 Enable Settings register */ +#define SN65DP141_REG_CH2_CFG 0x08 /*!< Channel 2 Control Settings register */ +#define SN65DP141_REG_CH2_EN 0x09 /*!< Channel 2 Enable Settings register */ +#define SN65DP141_REG_CH3_CFG 0x0B /*!< Channel 3 Control Settings register */ +#define SN65DP141_REG_CH3_EN 0x0C /*!< Channel 3 Enable Settings register */ + +/*********** Bit definition for General Device Settings register *************/ +#define SN65DP141_REG_CFG_EQ_MODE_Pos (1U) +#define SN65DP141_REG_CFG_EQ_MODE_Msk (0x1U << SN65DP141_REG_CFG_EQ_MODE_Pos) /*!< 0x04*/ +#define SN65DP141_REG_CFG_EQ_MODE SN65DP141_REG_CFG_EQ_MODE_Msk /*!< EQ mode (Cable mode v.s. Trace mode) */ +#define SN65DP141_REG_CFG_SYNC_ALL_Pos (3U) +#define SN65DP141_REG_CFG_SYNC_ALL_Msk (0x1U << SN65DP141_REG_CFG_SYNC_ALL_Pos) /*!< 0x08*/ +#define SN65DP141_REG_CFG_SYNC_ALL SN65DP141_REG_CFG_SYNC_ALL_Msk /*!< All settings from channel 1 will be used on all channels */ +#define SN65DP141_REG_CFG_SYNC_23_Pos (4U) +#define SN65DP141_REG_CFG_SYNC_23_Msk (0x1U << SN65DP141_REG_CFG_SYNC23_Pos) /*!< 0x10*/ +#define SN65DP141_REG_CFG_SYNC_23 SN65DP141_REG_CFG_SYNC_23_Msk /*!< All settings from channel 2 will be used for channel 2 and 3 */ +#define SN65DP141_REG_CFG_SYNC_01_Pos (5U) +#define SN65DP141_REG_CFG_SYNC_01_Msk (0x1U << SN65DP141_REG_CFG_SYNC01_Pos) /*!< 0x20*/ +#define SN65DP141_REG_CFG_SYNC_01 SN65DP141_REG_CFG_SYNC_01_Msk /*!< All settings from channel 1 will be used for channel 0 and 1 */ +#define SN65DP141_REG_CFG_PWRDOWN_Pos (6U) +#define SN65DP141_REG_CFG_PWRDOWN_Msk (0x1U << SN65DP141_REG_CFG_PWRDOWN_Pos) /*!< 0x40*/ +#define SN65DP141_REG_CFG_PWRDOWN SN65DP141_REG_CFG_PWRDOWN_Msk /*!< Power down the device */ +#define SN65DP141_REG_CFG_SW_GPIO_Pos (7U) +#define SN65DP141_REG_CFG_SW_GPIO_Msk (0x1U << SN65DP141_REG_CFG_SW_GPIO_Pos) /*!< 0x80*/ +#define SN65DP141_REG_CFG_SW_GPIO SN65DP141_REG_CFG_SW_GPIO_Msk /*!< Switching logic is controlled by GPIO or I2C */ + +/*********** Bit definition for Channel Enable register *************/ +#define SN65DP141_REG_CHEN_LN_EN_CH0_Pos (0U) +#define SN65DP141_REG_CHEN_LN_EN_CH0_Msk (0x1U << SN65DP141_REG_CHEN_LN_EN_CH0_Pos) /*!< 0x01 */ +#define SN65DP141_REG_CHEN_LN_EN_CH0 SN65DP141_REG_CHEN_LN_EN_CH0_Msk /*!< Channel 0 enable */ +#define SN65DP141_REG_CHEN_LN_EN_CH1_Pos (1U) +#define SN65DP141_REG_CHEN_LN_EN_CH1_Msk (0x1U << SN65DP141_REG_CHEN_LN_EN_CH1_Pos) /*!< 0x02 */ +#define SN65DP141_REG_CHEN_LN_EN_CH1 SN65DP141_REG_CHEN_LN_EN_CH1_Msk /*!< Channel 1 enable */ +#define SN65DP141_REG_CHEN_LN_EN_CH2_Pos (2U) +#define SN65DP141_REG_CHEN_LN_EN_CH2_Msk (0x1U << SN65DP141_REG_CHEN_LN_EN_CH2_Pos) /*!< 0x04 */ +#define SN65DP141_REG_CHEN_LN_EN_CH2 SN65DP141_REG_CHEN_LN_EN_CH2_Msk /*!< Channel 2 enable */ +#define SN65DP141_REG_CHEN_LN_EN_CH3_Pos (3U) +#define SN65DP141_REG_CHEN_LN_EN_CH3_Msk (0x1U << SN65DP141_REG_CHEN_LN_EN_CH3_Pos) /*!< 0x08 */ +#define SN65DP141_REG_CHEN_LN_EN_CH3 SN65DP141_REG_CHEN_LN_EN_CH3_Msk /*!< Channel 3 enable */ + +/*********** Bit definition for Channel x Control Settings register *************/ +#define SN65DP141_REG_CHxCFG_RX_GAIN_Pos (0U) +#define SN65DP141_REG_CHxCFG_RX_GAIN_Msk (0x3U << SN65DP141_REG_CHxCFG_RX_GAIN_Pos) /*!< 0x03 */ +#define SN65DP141_REG_CHxCFG_RX_GAIN SN65DP141_REG_CHxCFG_RX_GAIN_Msk /*!< Channel[x] RX_GAIN control */ +#define SN65DP141_REG_CHxCFG_RX_GAIN_0 (0x1U << SN65DP141_REG_CHxCFG_RX_GAIN_Pos) /*!< 0x01 */ +#define SN65DP141_REG_CHxCFG_RX_GAIN_1 (0x2U << SN65DP141_REG_CHxCFG_RX_GAIN_Pos) /*!< 0x02 */ +#define SN65DP141_REG_CHxCFG_EQ_DC_GAIN_Pos (2U) +#define SN65DP141_REG_CHxCFG_EQ_DC_GAIN_Msk (0x1U << SN65DP141_REG_CHxCFG_EQ_DC_GAIN_Pos) /*!< 0x04 */ +#define SN65DP141_REG_CHxCFG_EQ_DC_GAIN SN65DP141_REG_CHxCFG_EQ_DC_GAIN_Msk /*!< Channel[x] EQ DC gain */ +#define SN65DP141_REG_CHxCFG_TX_GAIN_Pos (3U) +#define SN65DP141_REG_CHxCFG_TX_GAIN_Msk (0x1U << SN65DP141_REG_CHxCFG_TX_GAIN_Pos) /*!< 0x08 */ +#define SN65DP141_REG_CHxCFG_TX_GAIN SN65DP141_REG_CHxCFG_TX_GAIN_Msk /*!< Channel[x] TX_DC_GAIN control */ +#define SN65DP141_REG_CHxCFG_EQ_SETTING_Pos (4U) +#define SN65DP141_REG_CHxCFG_EQ_SETTING_Msk (0x7U << SN65DP141_REG_CHxCFG_EQ_SETTING_Pos) /*!< 0x70 */ +#define SN65DP141_REG_CHxCFG_EQ_SETTING SN65DP141_REG_CHxCFG_EQ_SETTING_Msk /*!< Channel[x] TX_DC_GAIN control */ +#define SN65DP141_REG_CHxCFG_EQ_SETTING_0 (0x1U << SN65DP141_REG_CHxCFG_EQ_SETTING_Pos) /*!< 0x10 */ +#define SN65DP141_REG_CHxCFG_EQ_SETTING_1 (0x2U << SN65DP141_REG_CHxCFG_EQ_SETTING_Pos) /*!< 0x20 */ +#define SN65DP141_REG_CHxCFG_EQ_SETTING_2 (0x4U << SN65DP141_REG_CHxCFG_EQ_SETTING_Pos) /*!< 0x40 */ + +/*********** Bit definition for Channel x Enable Settings register *************/ +#define SN65DP141_REG_CHxCTL_DRV_EN_Pos (0U) +#define SN65DP141_REG_CHxCTL_DRV_EN_Msk (0x1U << SN65DP141_REG_CHxCTL_DRV_EN_Pos) /*!< 0x01 */ +#define SN65DP141_REG_CHxCTL_DRV_EN SN65DP141_REG_CHxCTL_DRV_EN_Msk /*!< Channel[0] driver stage enable */ +#define SN65DP141_REG_CHxCTL_EQ_EN_Pos (1U) +#define SN65DP141_REG_CHxCTL_EQ_EN_Msk (0x1U << SN65DP141_REG_CHxCTL_EQ_EN_Pos) /*!< 0x02 */ +#define SN65DP141_REG_CHxCTL_EQ_EN SN65DP141_REG_CHxCTL_EQ_EN_Msk /*!< Channel[0] EQ stage enable */ +#define SN65DP141_REG_CHxCTL_DRV_PEAK_Pos (2U) +#define SN65DP141_REG_CHxCTL_DRV_PEAK_Msk (0x1U << SN65DP141_REG_CHxCTL_DRV_PEAK_Pos) /*!< 0x04 */ +#define SN65DP141_REG_CHxCTL_DRV_PEAK SN65DP141_REG_CHxCTL_DRV_PEAK_Msk /*!< Channel[0] driver peaking */ + +/** @defgroup SN65DP141_Channel_Identifier + * @{ + */ +#define SN65DP141_CHANNEL_1 0x00U +#define SN65DP141_CHANNEL_2 0x01U +#define SN65DP141_CHANNEL_3 0x04U +#define SN65DP141_CHANNEL_4 0x08U +#define SN65DP141_CHANNEL_ALL 0x0FU +/** + * @} + */ + +/** @defgroup SN65DP141_EQ_Mode + * @{ + */ +#define SN65DP141_EQ_MODE_CABLE 0x00U +#define SN65DP141_EQ_MODE_TRACE SN65DP141_REG_CFG_EQ_MODE +/** + * @} + */ + +/** @defgroup SN65DP141_Channel_Tracking + * @{ + */ +#define SN65DP141_CHANNEL_TRACKING_NONE 0x00U +#define SN65DP141_CHANNEL_TRACKING_01 SN65DP141_REG_CFG_SYNC_01 +#define SN65DP141_CHANNEL_TRACKING_23 SN65DP141_REG_CFG_SYNC_23 +#define SN65DP141_CHANNEL_TRACKING_ALL SN65DP141_REG_CFG_SYNC_ALL +/** + * @} + */ + +/** @defgroup SN65DP141_EQGAIN SN65DP141 Equalizer Gain + * @{ + */ +#define SN65DP141_EQGAIN_0 0x0U +#define SN65DP141_EQGAIN_1 0x1U +#define SN65DP141_EQGAIN_2 0x2U +#define SN65DP141_EQGAIN_3 0x3U +#define SN65DP141_EQGAIN_4 0x4U +#define SN65DP141_EQGAIN_5 0x5U +#define SN65DP141_EQGAIN_6 0x6U +#define SN65DP141_EQGAIN_7 0x7U +/** + * @} + */ + +/** @defgroup SN65DP141_Channel_RXGAIN + * @{ + */ +#define SN65DP141_CHANNEL_RXGAIN_LOW 0x00U +#define SN65DP141_CHANNEL_RXGAIN_HIZ SN65DP141_REG_CHxCFG_RX_GAIN_0 +#define SN65DP141_CHANNEL_RXGAIN_HIGH SN65DP141_REG_CHxCFG_RX_GAIN_1 +/** + * @} + */ + +/** @defgroup SN65DP141_Channel_EQDCGAIN + * @{ + */ +#define SN65DP141_CHANNEL_EQDCGAIN_MINUS6DB 0x00U +#define SN65DP141_CHANNEL_EQDCGAIN_0DB SN65DP141_REG_CHxCFG_EQ_DC_GAIN +/** + * @} + */ + +/** @defgroup SN65DP141_Channel_TXGAIN + * @{ + */ +#define SN65DP141_CHANNEL_RXGAIN_0DB 0x00U +#define SN65DP141_CHANNEL_RXGAIN_6DB SN65DP141_REG_CHxCFG_TX_GAIN +/** + * @} + */ + +/** + * @} + */ + +#if defined(SN65DP141_DEBUG) +/** @defgroup SN65DP141_Exported_Structure SN65DP141 Exported Structure + * @{ + */ + +typedef union { + uint8_t Register; + struct { + uint8_t RESERVED :2; + uint8_t EQ_MODE :1; + uint8_t SYNC_ALL :1; + uint8_t SYNC_23 :1; + uint8_t SYNC_01 :1; + uint8_t PWRDOWN :1; + uint8_t SW_GPIO :1; + }; +} SN65DP141_GeneralTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t LN_EN_CH0 :1; + uint8_t LN_EN_CH1 :1; + uint8_t LN_EN_CH2 :1; + uint8_t LN_EN_CH3 :1; + uint8_t RESERVED :4; + }; +} SN65DP141_ChannelEnableTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RX_GAIN_0 :1; + uint8_t RX_GAIN_1 :1; + uint8_t EQ_DC_GAIN :1; + uint8_t TX_GAIN :1; + uint8_t EQ_Setting_0 :1; + uint8_t EQ_Setting_1 :1; + uint8_t EQ_Setting_2 :1; + uint8_t RESERVED :1; + }; +} SN65DP141_Channel0CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RSVDRV_EN :1; + uint8_t EQ_EN :1; + uint8_t DRV_PEAK :1; + uint8_t RESERVED :5; + }; +} SN65DP141_Channel0EnableTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RX_GAIN_0 :1; + uint8_t RX_GAIN_1 :1; + uint8_t EQ_DC_GAIN :1; + uint8_t TX_GAIN :1; + uint8_t EQ_Setting_0 :1; + uint8_t EQ_Setting_1 :1; + uint8_t EQ_Setting_2 :1; + uint8_t RESERVED :1; + }; +} SN65DP141_Channel1CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RSVDRV_EN :1; + uint8_t EQ_EN :1; + uint8_t DRV_PEAK :1; + uint8_t RESERVED :5; + }; +} SN65DP141_Channel1EnableTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RX_GAIN_0 :1; + uint8_t RX_GAIN_1 :1; + uint8_t EQ_DC_GAIN :1; + uint8_t TX_GAIN :1; + uint8_t EQ_Setting_0 :1; + uint8_t EQ_Setting_1 :1; + uint8_t EQ_Setting_2 :1; + uint8_t RESERVED :1; + }; +} SN65DP141_Channel2CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RSVDRV_EN :1; + uint8_t EQ_EN :1; + uint8_t DRV_PEAK :1; + uint8_t RESERVED :5; + }; +} SN65DP141_Channel2EnableTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RX_GAIN_0 :1; + uint8_t RX_GAIN_1 :1; + uint8_t EQ_DC_GAIN :1; + uint8_t TX_GAIN :1; + uint8_t EQ_Setting_0 :1; + uint8_t EQ_Setting_1 :1; + uint8_t EQ_Setting_2 :1; + uint8_t RESERVED :1; + }; +} SN65DP141_Channel3CtrlTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t RSVDRV_EN :1; + uint8_t EQ_EN :1; + uint8_t DRV_PEAK :1; + uint8_t RESERVED :5; + }; +} SN65DP141_Channel3EnableTypeDef; + +typedef struct +{ + SN65DP141_GeneralTypeDef General; /*!< 0x00 (General Device Settings) */ + SN65DP141_ChannelEnableTypeDef ChannelEnable; /*!< 0x01 (Channel Enable) */ + SN65DP141_Channel0CtrlTypeDef Channel0Ctrl; /*!< 0x02 (Channel 0 Control Settings) */ + SN65DP141_Channel0EnableTypeDef Channel0Enable; /*!< 0x03 (Channel 0 Enable Settings) */ + SN65DP141_Channel1CtrlTypeDef Channel1Ctrl; /*!< 0x05 (Channel 1 Control Settings) */ + SN65DP141_Channel1EnableTypeDef Channel1Enable; /*!< 0x06 (Channel 1 Enable Settings) */ + SN65DP141_Channel2CtrlTypeDef Channel2Ctrl; /*!< 0x08 (Channel 2 Control Settings) */ + SN65DP141_Channel2EnableTypeDef Channel2Enable; /*!< 0x09 (Channel 2 Enable Settings) */ + SN65DP141_Channel3CtrlTypeDef Channel3Ctrl; /*!< 0x0B (Channel 3 Control Settings) */ + SN65DP141_Channel3EnableTypeDef Channel3Enable; /*!< 0x0C (Channel 3 Enable Settings) */ +} SN65DP141_RegistersTypeDef; +/** + * @} + */ +#endif /* SN65DP141_DEBUG */ + +/** @defgroup SN65DP141_Exported_Functions + * @{ + */ +uint32_t sn65dp141_Init(uint16_t Address); +void sn65dp141_DeInit(uint16_t Address); +uint32_t sn65dp141_PowerOn(uint16_t Address); +uint32_t sn65dp141_PowerOff(uint16_t Address); +uint32_t sn65dp141_SetEQGain(uint16_t Address, DPREDRIVER_ChannelId_t ChannelId, uint8_t EQGain); +uint32_t sn65dp141_EnableChannel(uint16_t Address, DPREDRIVER_ChannelId_t ChannelId); +uint32_t sn65dp141_DisableChannel(uint16_t Address, DPREDRIVER_ChannelId_t ChannelId); + +/* MUX IO functions */ +uint8_t MUX_IO_Init(void); +void MUX_IO_DeInit(void); +uint8_t MUX_IO_Write(uint16_t Addr, uint16_t Reg, uint8_t Data); +uint8_t MUX_IO_Read(uint16_t Addr, uint16_t Reg, uint8_t *pData); +uint32_t MUX_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials); + +/** + * @} + */ + +/** @defgroup SN65DP141_Exported_Variables + * @{ + */ +/* DisplayPort Linear Redriver Driver structure */ +extern DPREDRIVER_Drv_t sn65dp141_drv; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus + } +#endif + +#endif /* SN65DP141_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/Release_Notes.html b/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/Release_Notes.html new file mode 100644 index 0000000..82ed407 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/Release_Notes.html @@ -0,0 +1,260 @@ + + + + + +Release Notes for STLM75 Component Drivers + + + + + +
Back to Release page + +
+

License

+This software component is licensed by ST under BSD 3-Clause +license, the "License"; You may not use this component except in +compliance with +the License. You may obtain a copy of the License at: +

https://opensource.org/licenses/BSD-3-Clause

+
+
+
+
+

V2.0.2 / 17-December-2018

+
+
+

Main +Changes

+
    +
  • Fix "Back to +Release page" link
    • +
+
+
+
+

+
+ +
+
+

For complete +documentation on STM32 Microcontrollers, +visit: www.st.com/STM32

+
+
+
+ \ No newline at end of file diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/stlm75.c b/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/stlm75.c new file mode 100644 index 0000000..89fd095 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/stlm75.c @@ -0,0 +1,180 @@ +/** + ****************************************************************************** + * @file stlm75.c + * @author MCD Application Team + * @brief This file provides a set of functions needed to manage the STLM75 + * Temperature Sensor. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2014 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stlm75.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @defgroup STLM75 + * @brief This file provides a set of functions needed to drive the + * STLM75 Temperature Sensor. + * @{ + */ + +/** @defgroup STLM75_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup STLM75_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup STLM75_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup STLM75_Private_Variables + * @{ + */ +TSENSOR_DrvTypeDef Stlm75Drv = +{ + STLM75_Init, + STLM75_IsReady, + STLM75_ReadStatus, + STLM75_ReadTemp, +}; + +/** + * @} + */ + +/** @defgroup STLM75_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup STLM75_Private_Functions + * @{ + */ + +/** + * @brief Set STLM75 Initialization. + * @param DeviceAddr : Device ID address. + * @param pInitStruct: pointer to a STLM75_InitTypeDef structure + * that contains the configuration setting for the STLM75. + * @retval None + */ +void STLM75_Init(uint16_t DeviceAddr, TSENSOR_InitTypeDef *pInitStruct) +{ + uint8_t confreg = 0; + uint16_t tempreg = 0; + + /* Set the Configuration Register */ + confreg = (uint8_t)(pInitStruct->AlertMode | pInitStruct->ConversionMode); + TSENSOR_IO_Write(DeviceAddr, &confreg, LM75_REG_CONF, 1); + + /* Set the Temperature Registers */ + /* Keep the sign bit and shift the temperature value (as given value is integer, the 0.5 digit is not set) */ + tempreg = (((pInitStruct->TemperatureLimitHigh & 0x7F) << 8) | (pInitStruct->TemperatureLimitHigh & 0x80)); + TSENSOR_IO_Write(DeviceAddr, (uint8_t*)(&tempreg), LM75_REG_TOS, 2); + + tempreg = (((pInitStruct->TemperatureLimitLow & 0x7F) << 8) | (pInitStruct->TemperatureLimitLow & 0x80)); + TSENSOR_IO_Write(DeviceAddr, (uint8_t*)(&tempreg), LM75_REG_THYS, 2); +} + +/** + * @brief Check if STLM75 sensor is ready or not + * @param DeviceAddr : Device ID address. + * @param Trials: Number of trials + * @retval READY or NOT + */ +uint8_t STLM75_IsReady(uint16_t DeviceAddr, uint32_t Trials) +{ + /* Configure the low level interface ---------------------------------------*/ + TSENSOR_IO_Init(); + + /* Check is Temperature Sensor is Ready to use */ + return TSENSOR_IO_IsDeviceReady(DeviceAddr, Trials); +} + +/** + * @brief Read The Temperature Sensor Status + * @param DeviceAddr : Device ID address. + * @retval Status + */ +uint8_t STLM75_ReadStatus(uint16_t DeviceAddr) +{ + uint8_t tmp = 0; + + /* Read Status register */ + TSENSOR_IO_Read(DeviceAddr, &tmp, LM75_REG_CONF, 1); + + /* Return Temperature Sensor Status */ + return (uint8_t)(tmp); +} + +/** + * @brief Read temperature value of STLM75 + * @param DeviceAddr: Device ID address + * @retval temperature value + */ +float STLM75_ReadTemp(uint16_t DeviceAddr) +{ + uint16_t tempreg = 0; + uint16_t tmp = 0; + + /* Read Temperature registers */ + TSENSOR_IO_Read(DeviceAddr, (uint8_t*)(&tempreg), LM75_REG_TEMP, 2); + + tmp = ((tempreg & 0x00FF) << 8) | ((tempreg & 0xFF00) >> 8); + tempreg = (((tmp & 0x7F80) >> 7) | (tmp & 0x8000)); + + /* Return Temperature value */ + return (float)tempreg; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/stlm75.h b/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/stlm75.h new file mode 100644 index 0000000..105a2f9 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/stlm75/stlm75.h @@ -0,0 +1,126 @@ +/** + ****************************************************************************** + * @file stlm75.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the stlm75.c + * temperature sensor driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2014 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STLM75_H +#define __STLM75_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "../Common/tsensor.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup STLM75 + * @{ + */ + +/** @defgroup STLM75_Exported_Constants + * @{ + */ +/******************************************************************************/ +/*************************** START REGISTER MAPPING **************************/ +/******************************************************************************/ + +/***************************** Read Access Only *******************************/ +#define LM75_REG_TEMP 0x00 /*!< Temperature Register of LM75 */ + +/***************************** Read/Write Access ******************************/ +#define LM75_REG_CONF 0x01 /*!< Configuration Register of LM75 */ +#define LM75_REG_THYS 0x02 /*!< Temperature Register of LM75 */ +#define LM75_REG_TOS 0x03 /*!< Over-temp Shutdown threshold Register of LM75 */ + +/******************************************************************************/ +/**************************** END REGISTER MAPPING ***************************/ +/******************************************************************************/ +/** @defgroup Conversion_Mode_Selection + * @{ + */ +#define STLM75_CONTINUOUS_MODE ((uint8_t)0x00) +#define STLM75_ONE_SHOT_MODE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup Operation_Mode + * @{ + */ +#define STLM75_COMPARATOR_MODE ((uint8_t)0x00) +#define STLM75_INTERRUPT_MODE ((uint8_t)0x02) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup STLM75_Exported_Functions + * @{ + */ +/* Sensor Configuration Functions */ +void STLM75_Init(uint16_t DeviceAddr, TSENSOR_InitTypeDef *pInitStruct); +uint8_t STLM75_IsReady(uint16_t DeviceAddr, uint32_t Trials); +/* Sensor Request Functions */ +uint8_t STLM75_ReadStatus(uint16_t DeviceAddr); +float STLM75_ReadTemp(uint16_t DeviceAddr); + +/* Temperature Sensor driver structure */ +extern TSENSOR_DrvTypeDef Stlm75Drv; + +/* Temperature Sensor IO functions */ +void TSENSOR_IO_Init(void); +void TSENSOR_IO_Write(uint16_t DevAddress, uint8_t* pBuffer, uint8_t WriteAddr, uint16_t Length); +void TSENSOR_IO_Read(uint16_t DevAddress, uint8_t* pBuffer, uint8_t ReadAddr, uint16_t Length); +uint16_t TSENSOR_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus + } +#endif + +#endif /* __STTS751_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/Release_Notes.html b/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/Release_Notes.html new file mode 100644 index 0000000..e35a83b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/Release_Notes.html @@ -0,0 +1,83 @@ + + + + + + + Release Notes for TUSB546 Component Drivers + + + + + +
+
+
+
+
+

Release Notes for TUSB546 Component Drivers

+

Copyright © 2017 STMicroelectronics
+

+ +
+
+
+

License

+

Licensed by ST under BSD 3-Clause license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:

+

https://opensource.org/licenses/BSD-3-Clause

+

Purpose

+

This directory contains the TUSB546 component drivers.

+
+
+

Update History

+
+ +
+

Main Changes

+
    +
  • Correct misspelled words
    • +
  • Update Release Notes format
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Fix compilation warnings detected by IAR V8.30.1
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • Correct compilation warnings detected by SW4STM32 gcc compiler
    • +
+
+
+
+ +
+

Main Changes

+
    +
  • First official release of TUSB546 Component drivers
    • +
+
+
+
+
+ + + diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/tusb546.c b/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/tusb546.c new file mode 100644 index 0000000..eee29eb --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/tusb546.c @@ -0,0 +1,533 @@ +/** + ****************************************************************************** + * @file tusb546.c + * @author MCD Application Team + * @brief This file provides a set of functions needed to manage the TUSB546 + * (USB Type-C DP ALT Mode Linear Redriver Crosspoint Switch). + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "tusb546.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @defgroup TUSB546 + * @brief This file provides a set of functions needed to drive the + * TUSB546 USB Type-C DP ALT Mode Linear Redriver Crosspoint Switch. + * @{ + */ + +/** @defgroup TUSB546_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup TUSB546_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup TUSB546_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TUSB546_Private_Variables + * @{ + */ + +/* Type-C Crosspoint Switch Driver structure initialization */ +TYPECSWITCH_Drv_t tusb546_drv_CrossSwitch = +{ + tusb546_CrossSwitch_Init, + tusb546_CrossSwitch_DeInit, + tusb546_CrossSwitch_PowerOn, + tusb546_CrossSwitch_PowerOff, + tusb546_CrossSwitch_SetMode, + tusb546_CrossSwitch_IsSupportedMode +}; + +/* DisplayPort Linear Redriver driver structure initialization*/ +DPREDRIVER_Drv_t tusb546_drv_LinearRedriver = +{ + tusb546_DPRedriver_Init, + tusb546_DPRedriver_DeInit, + tusb546_DPRedriver_PowerOn, + tusb546_DPRedriver_PowerOff, + tusb546_DPRedriver_SetEQGain, + tusb546_DPRedriver_EnableChannel, + tusb546_DPRedriver_DisableChannel +}; + +/* Supported USB Type-C pin assignments */ +static const uint32_t tusb546_SupportedModes = + ( 1 << USB_NORMAL | + 1 << USB_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_C_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_C_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_D_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_D_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_E_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_E_FLIPPED | + 1 << DFP_D_PIN_ASSIGNMENT_F_NORMAL | + 1 << DFP_D_PIN_ASSIGNMENT_F_FLIPPED ); + +static uint8_t tusb546_IsInitialized_CrossSwitch = 0; +static uint8_t tusb546_IsInitialized_DPRedriver = 0; + +/** + * @} + */ + + + +/** @defgroup TUSB546_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + +/** @defgroup TUSB546_Private_Functions + * @{ + */ + +/** + * @brief Initialize the TUSB546 and configure the needed hardware resources + * (Type-C cross switch part). + * @param Address TUSB546 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t tusb546_CrossSwitch_Init(uint16_t Address) +{ + uint32_t err_count = 0; + + tusb546_IsInitialized_CrossSwitch = 1; + + if (!tusb546_IsInitialized_DPRedriver) + { + /* Low level init */ + err_count += MUX_IO_Init(); + + /* Restore TUSB546 registers reset values */ + err_count += MUX_IO_Write(Address, TUSB546_REG_CTRL, 0x01); + err_count += MUX_IO_Write(Address, TUSB546_REG_DP_CTRL1, 0x00); + err_count += MUX_IO_Write(Address, TUSB546_REG_DP_CTRL2, 0x00); + err_count += MUX_IO_Write(Address, TUSB546_REG_DP_CTRL4, 0x00); + err_count += MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL1, 0x00); + err_count += MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL2, 0x00); + err_count += MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL3, 0x00); + } + + return err_count; +} + +/** + * @brief Release the hardware resources required to use the TUSB546 + * (Type-C cross switch part). + * @param Address TUSB546 address on communication Bus. + * @retval none + */ +void tusb546_CrossSwitch_DeInit(uint16_t Address) +{ + tusb546_IsInitialized_CrossSwitch = 0; + + if ((!tusb546_IsInitialized_CrossSwitch) && + (!tusb546_IsInitialized_DPRedriver)) + { + /* Restore TUSB546 registers reset values */ + MUX_IO_Write(Address, TUSB546_REG_CTRL, 0x01); + MUX_IO_Write(Address, TUSB546_REG_DP_CTRL1, 0x00); + MUX_IO_Write(Address, TUSB546_REG_DP_CTRL2, 0x00); + MUX_IO_Write(Address, TUSB546_REG_DP_CTRL4, 0x00); + MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL1, 0x00); + MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL2, 0x00); + MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL3, 0x00); + + /* Low level de-init */ + MUX_IO_DeInit(); + } +} + +/** + * @brief Power on the TUSB546 (Type-C cross switch part). + * @param Address TUSB546 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t tusb546_CrossSwitch_PowerOn(uint16_t Address) +{ + uint32_t err_count = 0; + + /* Enable USB3x port */ + err_count += MUX_IO_Write(Address, TUSB546_REG_CTRL, TUSB546_REG_CTRL_CTLSEL_0); + + return err_count; +} + +/** + * @brief Power down the TUSB546 (Type-C cross switch part). + * @param Address TUSB546 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t tusb546_CrossSwitch_PowerOff(uint16_t Address) +{ + uint32_t err_count = 0; + + /* All RX and TX for USB3 and DisplayPort are disabled */ + err_count += MUX_IO_Write(Address, TUSB546_REG_CTRL, 0); + + return err_count; +} + +/** + * @brief Configure the TUSB546 according to the requested USB Type-C + * connector pin assignment. + * @param Address TUSB546 address on communication Bus. + * @param Mode USB Type-C connector pin assignment + * @retval 0: success, else error + */ +uint32_t tusb546_CrossSwitch_SetMode(uint16_t Address, TYPECSWITCH_Mode_t Mode) +{ + uint32_t err_count = 0; + uint8_t flipsel; + uint8_t ctlsel; + uint8_t ctlreg; + + switch(Mode) + { + case USB_NORMAL: + flipsel = 0; + ctlsel = TUSB546_REG_CTRL_CTLSEL_0; + break; + case USB_FLIPPED: + flipsel = TUSB546_REG_CTRL_FLIPSEL; + ctlsel = TUSB546_REG_CTRL_CTLSEL_0; + break; + case DFP_D_PIN_ASSIGNMENT_C_NORMAL: + case DFP_D_PIN_ASSIGNMENT_E_NORMAL: + flipsel = 0; + ctlsel = TUSB546_REG_CTRL_CTLSEL_1; + break; + case DFP_D_PIN_ASSIGNMENT_C_FLIPPED: + case DFP_D_PIN_ASSIGNMENT_E_FLIPPED: + flipsel = TUSB546_REG_CTRL_FLIPSEL; + ctlsel = TUSB546_REG_CTRL_CTLSEL_1; + break; + case DFP_D_PIN_ASSIGNMENT_D_NORMAL: + case DFP_D_PIN_ASSIGNMENT_F_NORMAL: + flipsel = 0; + ctlsel = TUSB546_REG_CTRL_CTLSEL; + break; + case DFP_D_PIN_ASSIGNMENT_D_FLIPPED: + case DFP_D_PIN_ASSIGNMENT_F_FLIPPED: + flipsel = TUSB546_REG_CTRL_FLIPSEL; + ctlsel = TUSB546_REG_CTRL_CTLSEL; + break; + default: + flipsel = 0; + ctlsel = 0; + break; + } + + /* Get actual device configuration */ + err_count += MUX_IO_Read(Address, TUSB546_REG_CTRL, &ctlreg); + ctlreg = (ctlreg & ~(uint8_t)(TUSB546_REG_CTRL_FLIPSEL | TUSB546_REG_CTRL_CTLSEL)) | (flipsel | ctlsel); + + /* Update device configuration */ + err_count += MUX_IO_Write(Address, TUSB546_REG_CTRL, ctlreg); + + return err_count; +} + +/** + * @brief Indicate whether the requested USB Type-C connector pin assignment + * is supported by the TUSB546. + * @param Mode USB Type-C connector pin assignment + * @retval 1: Mode supported, else Mode not supported + */ +uint32_t tusb546_CrossSwitch_IsSupportedMode(TYPECSWITCH_Mode_t Mode) +{ + return (((1 << Mode) & tusb546_SupportedModes ) == 0) ? 0 : 1; +} + +/** + * @brief Initialize the TUSB546 and configure the needed hardware resources + * (DisplayPort linear redriver part). + * @param Address TUSB546 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t tusb546_DPRedriver_Init(uint16_t Address) +{ + uint32_t err_count = 0; + + tusb546_IsInitialized_DPRedriver = 1; + + if (!tusb546_IsInitialized_CrossSwitch) + { + /* Low level init */ + err_count += MUX_IO_Init(); + } + + return err_count; +} + +/** + * @brief Release the hardware resources required to use the TUSB546 + * (DisplayPort linear redriver part). + * @param Address TUSB546 address on communication Bus. + * @retval none + */ +void tusb546_DPRedriver_DeInit(uint16_t Address) +{ + tusb546_IsInitialized_DPRedriver = 0; + + if ((!tusb546_IsInitialized_CrossSwitch) && + (!tusb546_IsInitialized_DPRedriver)) + { + /* Restore TUSB546 registers reset values */ + MUX_IO_Write(Address, TUSB546_REG_CTRL, 0x01); + MUX_IO_Write(Address, TUSB546_REG_DP_CTRL1, 0x00); + MUX_IO_Write(Address, TUSB546_REG_DP_CTRL2, 0x00); + MUX_IO_Write(Address, TUSB546_REG_DP_CTRL4, 0x00); + MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL1, 0x00); + MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL2, 0x00); + MUX_IO_Write(Address, TUSB546_REG_USB3_CTRL3, 0x00); + + /* Low level de-init */ + MUX_IO_DeInit(); + } +} + +/** + * @brief Power on the TUSB546 (DisplayPort linear redriver part). + * @param Address TUSB546 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t tusb546_DPRedriver_PowerOn(uint16_t Address) +{ + return 0; +} + +/** + * @brief Power down the TUSB546 (DisplayPort linear redriver part). + * @param Address TUSB546 address on communication Bus. + * @retval 0: successful, else failed + */ +uint32_t tusb546_DPRedriver_PowerOff(uint16_t Address) +{ + return 0; +} + +/** + * @brief Set the equalizer gain for a given channel. + * @param Address TUSB546 address on communication Bus. + * @param ChannelId Channel identifier. + * This parameter can be take one of the following values: + * CHANNEL_DP0 + * CHANNEL_DP1 + * CHANNEL_DP2 + * CHANNEL_DP3 + * CHANNEL_RX1 + * CHANNEL_RX2 + * CHANNEL_SSTX + * @param EQGain Equalizer gain. + * This parameter must be a value between 0x00 and 0x0F. + * @retval 0: successful, else failed + */ +uint32_t tusb546_DPRedriver_SetEQGain(uint16_t Address, + DPREDRIVER_ChannelId_t ChannelId, + uint8_t EQGain) +{ + uint32_t err_count = 0; + uint8_t eqsel = 0; + uint8_t reg_offset = 0; + uint8_t ctlreg; + uint8_t mask = 0; + + switch(ChannelId) + { + case CHANNEL_DP0: + reg_offset = TUSB546_REG_DP_CTRL1; + mask = TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Msk; + eqsel = EQGain; + break; + case CHANNEL_DP1: + reg_offset = TUSB546_REG_DP_CTRL1; + mask = TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Msk; + eqsel = (EQGain << TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Pos); + break; + case CHANNEL_DP2: + reg_offset = TUSB546_REG_DP_CTRL2; + mask = TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Msk; + eqsel = EQGain; + break; + case CHANNEL_DP3: + reg_offset = TUSB546_REG_DP_CTRL2; + mask = TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Msk; + eqsel = (EQGain << TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Pos); + break; + case CHANNEL_RX1: + reg_offset = TUSB546_REG_USB3_CTRL1; + mask = TUSB546_REG_USB3_CTRL1_EQ1_SEL_Msk; + eqsel = EQGain; + break; + case CHANNEL_RX2: + reg_offset = TUSB546_REG_USB3_CTRL1; + mask = TUSB546_REG_USB3_CTRL1_EQ2_SEL_Msk; + eqsel = (EQGain << TUSB546_REG_USB3_CTRL1_EQ2_SEL_Pos); + break; + case CHANNEL_SSTX: + reg_offset = TUSB546_REG_USB3_CTRL2; + mask = TUSB546_USB3_CTRL2_SSEQ_SEL_Msk; + eqsel = EQGain; + break; + } + + if (reg_offset != 0) + { + /* Set EQ_OVERRIDE to use EQ settings from registers instead of value sample from pins */ + err_count += MUX_IO_Write(Address, TUSB546_REG_CTRL, TUSB546_REG_CTRL_EQ_OVERRIDE); + + /* Get actual EQ configuration */ + err_count += MUX_IO_Read(Address, reg_offset, &ctlreg); + ctlreg = (ctlreg & ~(mask)) | eqsel; + + /* Update EQ configuration */ + err_count += MUX_IO_Write(Address, reg_offset, ctlreg); + } + + return err_count; +} + +/** + * @brief Enable a DP channel. + * @param Address TUSB546 address on communication Bus. + * @param ChannelId Channel identifier. + * This parameter can be take one of the following values: + * CHANNEL_DP0 + * CHANNEL_DP1 + * CHANNEL_DP2 + * CHANNEL_DP3 + * @retval 0: successful, else failed + */ +uint32_t tusb546_DPRedriver_EnableChannel(uint16_t Address, + DPREDRIVER_ChannelId_t ChannelId) +{ + uint32_t err_count = 0; + uint8_t ctlreg; + + err_count += MUX_IO_Read(Address, TUSB546_REG_DP_CTRL4, &ctlreg); + + switch(ChannelId) + { + case CHANNEL_DP0: + ctlreg &= ~TUSB546_REG_DP_CTRL4_DP0_DISABLE; + break; + case CHANNEL_DP1: + ctlreg &= ~TUSB546_REG_DP_CTRL4_DP1_DISABLE; + break; + case CHANNEL_DP2: + ctlreg &= ~TUSB546_REG_DP_CTRL4_DP2_DISABLE; + break; + case CHANNEL_DP3: + ctlreg &= ~TUSB546_REG_DP_CTRL4_DP3_DISABLE; + break; + default: + /* Nothing to do */ + break; + } + + /* Enable the DP line */ + err_count += MUX_IO_Write(Address, TUSB546_REG_DP_CTRL4, ctlreg); + + return err_count; +} + +/** + * @brief Disable a DP channel. + * @param Address TUSB546 address on communication Bus. + * @param ChannelId Channel identifier. + * This parameter can be take one of the following values: + * CHANNEL_DP0 + * CHANNEL_DP1 + * CHANNEL_DP2 + * CHANNEL_DP3 + * @retval 0: successful, else failed + */ +uint32_t tusb546_DPRedriver_DisableChannel(uint16_t Address, + DPREDRIVER_ChannelId_t ChannelId) +{ + uint32_t err_count = 0; + uint8_t ctlreg; + + err_count += MUX_IO_Read(Address, TUSB546_REG_DP_CTRL4, &ctlreg); + + switch(ChannelId) + { + case CHANNEL_DP0: + ctlreg |= TUSB546_REG_DP_CTRL4_DP0_DISABLE; + break; + case CHANNEL_DP1: + ctlreg |= TUSB546_REG_DP_CTRL4_DP1_DISABLE; + break; + case CHANNEL_DP2: + ctlreg |= TUSB546_REG_DP_CTRL4_DP2_DISABLE; + break; + case CHANNEL_DP3: + ctlreg |= TUSB546_REG_DP_CTRL4_DP3_DISABLE; + break; + default: + /* Nothing to do */ + break; + } + + /* Disable the DP line */ + err_count += MUX_IO_Write(Address, TUSB546_REG_DP_CTRL4, ctlreg); + + return err_count; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/tusb546.h b/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/tusb546.h new file mode 100644 index 0000000..77f8ff4 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/Components/tusb546/tusb546.h @@ -0,0 +1,474 @@ +/** + ****************************************************************************** + * @file tusb546.h + * @author MCD Application Team + * @brief Header for tusb546.h module + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef TUSB546_H +#define TUSB546_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include +#include "../Common/usbtypecswitch.h" +#include "../Common/dpredriver.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TUSB546 + * @{ + */ + +/** @defgroup TUSB546_Exported_Constants + * @{ + */ +/******************************* Register Map ********************************/ +#define TUSB546_REG_CTRL 0x0A /*!< */ +#define TUSB546_REG_DP_CTRL1 0x10 /*!< */ +#define TUSB546_REG_DP_CTRL2 0x11 /*!< */ +#define TUSB546_REG_DP_CTRL3 0x12 /*!< */ +#define TUSB546_REG_DP_CTRL4 0x13 /*!< */ +#define TUSB546_REG_USB3_CTRL1 0x20 /*!< */ +#define TUSB546_REG_USB3_CTRL2 0x21 /*!< */ +#define TUSB546_REG_USB3_CTRL3 0x22 /*!< */ + +/*********************** Bit definition for CTRL register *******************/ +#define TUSB546_REG_CTRL_CTLSEL_Pos (0U) +#define TUSB546_REG_CTRL_CTLSEL_Msk (0x3U << TUSB546_REG_CTRL_CTLSEL_Pos) /*!< 0x03*/ +#define TUSB546_REG_CTRL_CTLSEL TUSB546_REG_CTRL_CTLSEL_Msk /*!< DP Alt mode and USB 3.1 Switch Control */ +#define TUSB546_REG_CTRL_CTLSEL_0 (0x1 << TUSB546_REG_CTRL_CTLSEL_Pos) /*!< 0x01 */ +#define TUSB546_REG_CTRL_CTLSEL_1 (0x2 << TUSB546_REG_CTRL_CTLSEL_Pos) /*!< 0x02 */ +#define TUSB546_REG_CTRL_FLIPSEL_Pos (2U) +#define TUSB546_REG_CTRL_FLIPSEL_Msk (0x1U << TUSB546_REG_CTRL_FLIPSEL_Pos) /*!< 0x04*/ +#define TUSB546_REG_CTRL_FLIPSEL TUSB546_REG_CTRL_FLIPSEL_Msk /*!< Flip Control */ +#define TUSB546_REG_CTRL_HPDIN_OVERRIDE_Pos (3U) +#define TUSB546_REG_CTRL_HPDIN_OVERRIDE_Msk (0x1U << TUSB546_REG_CTRL_HPDIN_OVERRIDE_Pos) /*!< 0x08*/ +#define TUSB546_REG_CTRL_HPDIN_OVERRIDE TUSB546_REG_CTRL_HPDIN_OVERRIDE_Msk /*!< HPDIN control */ +#define TUSB546_REG_CTRL_EQ_OVERRIDE_Pos (4U) +#define TUSB546_REG_CTRL_EQ_OVERRIDE_Msk (0x1U << TUSB546_REG_CTRL_EQ_OVERRIDE_Pos) /*!< 0x10*/ +#define TUSB546_REG_CTRL_EQ_OVERRIDE TUSB546_REG_CTRL_EQ_OVERRIDE_Msk /*!< EQ settings control */ +#define TUSB546_REG_CTRL_SWAP_HPDIN_Pos (5U) +#define TUSB546_REG_CTRL_SWAP_HPDIN_Msk (0x1U << TUSB546_REG_CTRL_SWAP_HPDIN_Pos) /*!< 0x20*/ +#define TUSB546_REG_CTRL_SWAP_HPDIN TUSB546_REG_CTRL_SWAP_HPDIN_Msk /*!< HPDIN pin control */ + +/********************* Bit definition for DP_CTRL1 register *****************/ +#define TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Pos (0U) +#define TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Msk (0xFU << TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Pos) /*!< 0x0F */ +#define TUSB546_REG_DP_CTRL1_DP0EQ_SEL TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Msk /*!< Field selects between 0 to 14dB of EQ for DP lane 0 */ +#define TUSB546_REG_DP_CTRL1_DP0EQ_SEL_0 (0x1 << TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Pos) /*!< 0x01 */ +#define TUSB546_REG_DP_CTRL1_DP0EQ_SEL_1 (0x2 << TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Pos) /*!< 0x02 */ +#define TUSB546_REG_DP_CTRL1_DP0EQ_SEL_2 (0x4 << TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Pos) /*!< 0x04 */ +#define TUSB546_REG_DP_CTRL1_DP0EQ_SEL_4 (0x8 << TUSB546_REG_DP_CTRL1_DP0EQ_SEL_Pos) /*!< 0x08 */ +#define TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Pos (4U) +#define TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Msk (0xFU << TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Pos) /*!< 0xF0*/ +#define TUSB546_REG_DP_CTRL1_DP1EQ_SEL TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Msk /*!< Field selects between 0 to 14dB of EQ for DP lane 1 */ +#define TUSB546_REG_DP_CTRL1_DP1EQ_SEL_0 (0x1 << TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Pos) /*!< 0x10 */ +#define TUSB546_REG_DP_CTRL1_DP1EQ_SEL_1 (0x2 << TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Pos) /*!< 0x20 */ +#define TUSB546_REG_DP_CTRL1_DP1EQ_SEL_2 (0x4 << TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Pos) /*!< 0x40 */ +#define TUSB546_REG_DP_CTRL1_DP1EQ_SEL_4 (0x8 << TUSB546_REG_DP_CTRL1_DP1EQ_SEL_Pos) /*!< 0x80 */ + +/********************* Bit definition for DP_CTRL2 register *****************/ +#define TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Pos (0U) +#define TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Msk (0xFU << TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Pos) /*!< 0x0F */ +#define TUSB546_REG_DP_CTRL2_DP2EQ_SEL TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Msk /*!< Field selects between 0 to 14dB of EQ for DP lane 2 */ +#define TUSB546_REG_DP_CTRL1_DP2EQ_SEL_0 (0x1 << TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Pos) /*!< 0x01 */ +#define TUSB546_REG_DP_CTRL1_DP2EQ_SEL_1 (0x2 << TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Pos) /*!< 0x02 */ +#define TUSB546_REG_DP_CTRL1_DP2EQ_SEL_2 (0x4 << TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Pos) /*!< 0x04 */ +#define TUSB546_REG_DP_CTRL1_DP2EQ_SEL_4 (0x8 << TUSB546_REG_DP_CTRL2_DP2EQ_SEL_Pos) /*!< 0x08 */ +#define TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Pos (4U) +#define TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Msk (0xFU << TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Pos) /*!< 0xF0*/ +#define TUSB546_REG_DP_CTRL2_DP3EQ_SEL TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Msk /*!< Field selects between 0 to 14dB of EQ for DP lane 3 */ +#define TUSB546_REG_DP_CTRL1_DP3EQ_SEL_0 (0x1 << TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Pos) /*!< 0x10 */ +#define TUSB546_REG_DP_CTRL1_DP3EQ_SEL_1 (0x2 << TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Pos) /*!< 0x20 */ +#define TUSB546_REG_DP_CTRL1_DP3EQ_SEL_2 (0x4 << TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Pos) /*!< 0x40 */ +#define TUSB546_REG_DP_CTRL1_DP3EQ_SEL_4 (0x8 << TUSB546_REG_DP_CTRL2_DP3EQ_SEL_Pos) /*!< 0x80 */ + +/********************* Bit definition for DP_CTRL3 register *****************/ +#define TUSB546_REG_DP_CTRL3_LANE_COUNT_SET_Pos (0U) +#define TUSB546_REG_DP_CTRL3_LANE_COUNT_SET_Msk (0x1FU << TUSB546_REG_DP_CTRL3_LANE_COUNT_SET_Pos) /*!< 0x1F */ +#define TUSB546_REG_DP_CTRL3_LANE_COUNT_SET TUSB546_REG_DP_CTRL3_LANE_COUNT_SET_Msk /*!< */ +#define TUSB546_REG_DP_CTRL3_SET_POWER_STATE_Pos (5U) +#define TUSB546_REG_DP_CTRL3_SET_POWER_STATE_Msk (0x3U << TUSB546_REG_DP_CTRL3_SET_POWER_STATE5_Pos) /*!< 0x60 */ +#define TUSB546_REG_DP_CTRL3_SET_POWER_STATE TUSB546_REG_DP_CTRL3_SET_POWER_STATE5_Msk /*!< */ +#define TUSB546_REG_DP_CTRL3_SET_POWER_STATE_0 (0x1 << TUSB546_REG_DP_CTRL3_SET_POWER_STATE_Pos) /*!< 0x20 */ +#define TUSB546_REG_DP_CTRL3_SET_POWER_STATE_1 (0x2 << TUSB546_REG_DP_CTRL3_SET_POWER_STATE_Pos) /*!< 0x40 */ + +/********************* Bit definition for DP_CTRL4 register *****************/ +#define TUSB546_REG_DP_CTRL4_DP0_DISABLE_Pos (0U) +#define TUSB546_REG_DP_CTRL4_DP0_DISABLE_Msk (0x1U << TUSB546_REG_DP_CTRL4_DP0_DISABLE_Pos) /*!< 0x01 */ +#define TUSB546_REG_DP_CTRL4_DP0_DISABLE TUSB546_REG_DP_CTRL4_DP0_DISABLE_Msk /*!< DP Lane 0 disable */ +#define TUSB546_REG_DP_CTRL4_DP1_DISABLE_Pos (1U) +#define TUSB546_REG_DP_CTRL4_DP1_DISABLE_Msk (0x1U << TUSB546_REG_DP_CTRL4_DP1_DISABLE_Pos) /*!< 0x02 */ +#define TUSB546_REG_DP_CTRL4_DP1_DISABLE TUSB546_REG_DP_CTRL4_DP1_DISABLE_Msk /*!< DP Lane 1 disable */ +#define TUSB546_REG_DP_CTRL4_DP2_DISABLE_Pos (2U) +#define TUSB546_REG_DP_CTRL4_DP2_DISABLE_Msk (0x1U << TUSB546_REG_DP_CTRL4_DP2_DISABLE_Pos) /*!< 0x04 */ +#define TUSB546_REG_DP_CTRL4_DP2_DISABLE TUSB546_REG_DP_CTRL4_DP2_DISABLE_Msk /*!< DP Lane 2 disable */ +#define TUSB546_REG_DP_CTRL4_DP3_DISABLE_Pos (3U) +#define TUSB546_REG_DP_CTRL4_DP3_DISABLE_Msk (0x1U << TUSB546_REG_DP_CTRL4_DP3_DISABLE_Pos) /*!< 0x08 */ +#define TUSB546_REG_DP_CTRL4_DP3_DISABLE TUSB546_REG_DP_CTRL4_DP3_DISABLE_Msk /*!< DP Lane 3 disable */ +#define TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_Pos (4U) +#define TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_Msk (0x3U << TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_Pos) /*!< 0x30 */ +#define TUSB546_REG_DP_CTRL4_AUX_SBU_OVR TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_Msk /*!< AUX to SBU config */ +#define TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_0 (0x1 << TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_Pos) /*!< 0x10 */ +#define TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_1 (0x2 << TUSB546_REG_DP_CTRL4_AUX_SBU_OVR_Pos) /*!< 0x20 */ +#define TUSB546_REG_DP_CTRL4_SNOOP_DISABLE_Pos (7U) +#define TUSB546_REG_DP_CTRL4_SNOOP_DISABLE_Msk (0x1U << TUSB546_REG_DP_CTRL4_SNOOP_DISABLE_Pos) /*!< 0x80 */ +#define TUSB546_REG_DP_CTRL4_SNOOP_DISABLE TUSB546_REG_DP_CTRL4_SNOOP_DISABLE_Msk /*!< AUX snoop disable */ + +/******************** Bit definition for USB3_CTRL1 register ****************/ +#define TUSB546_REG_USB3_CTRL1_EQ1_SEL_Pos (0U) +#define TUSB546_REG_USB3_CTRL1_EQ1_SEL_Msk (0xFU << TUSB546_REG_USB3_CTRL1_EQ1_SEL_Pos) /*!< 0x0F */ +#define TUSB546_REG_USB3_CTRL1_EQ1_SEL TUSB546_REG_USB3_CTRL1_EQ1_SEL_Msk /*!< Field selects between 0 to 11 dB of EQ for USB3.1 RX1 receiver */ +#define TUSB546_REG_USB3_CTRL1_EQ1_SEL_0 (0x1 << TUSB546_REG_USB3_CTRL1_EQ1_SEL_Pos) /*!< 0x01 */ +#define TUSB546_REG_USB3_CTRL1_EQ1_SEL_1 (0x2 << TUSB546_REG_USB3_CTRL1_EQ1_SEL_Pos) /*!< 0x02 */ +#define TUSB546_REG_USB3_CTRL1_EQ1_SEL_2 (0x4 << TUSB546_REG_USB3_CTRL1_EQ1_SEL_Pos) /*!< 0x04 */ +#define TUSB546_REG_USB3_CTRL1_EQ1_SEL_4 (0x8 << TUSB546_REG_USB3_CTRL1_EQ1_SEL_Pos) /*!< 0x08 */ +#define TUSB546_REG_USB3_CTRL1_EQ2_SEL_Pos (4U) +#define TUSB546_REG_USB3_CTRL1_EQ2_SEL_Msk (0xFU << TUSB546_REG_USB3_CTRL1_EQ2_SEL_Pos) /*!< 0xF0 */ +#define TUSB546_REG_USB3_CTRL1_EQ2_SEL TUSB546_REG_USB3_CTRL1_EQ2_SEL_Msk /*!< Field selects between 0 to 11 dB of EQ for USB3.1 RX2 receiver */ +#define TUSB546_REG_USB3_CTRL1_EQ2_SEL_0 (0x1 << TUSB546_REG_USB3_CTRL1_EQ2_SEL_Pos) /*!< 0x10 */ +#define TUSB546_REG_USB3_CTRL1_EQ2_SEL_1 (0x2 << TUSB546_REG_USB3_CTRL1_EQ2_SEL_Pos) /*!< 0x20 */ +#define TUSB546_REG_USB3_CTRL1_EQ2_SEL_2 (0x4 << TUSB546_REG_USB3_CTRL1_EQ2_SEL_Pos) /*!< 0x40 */ +#define TUSB546_REG_USB3_CTRL1_EQ2_SEL_4 (0x8 << TUSB546_REG_USB3_CTRL1_EQ2_SEL_Pos) /*!< 0x80 */ + +/******************** Bit definition for USB3_CTRL2 register ****************/ +#define TUSB546_USB3_CTRL2_SSEQ_SEL_Pos (0U) +#define TUSB546_USB3_CTRL2_SSEQ_SEL_Msk (0xFU << TUSB546_USB3_CTRL2_SSEQ_SEL_Pos) /*!< 0x0F */ +#define TUSB546_USB3_CTRL2_SSEQ_SEL TUSB546_USB3_CTRL2_SSEQ_SEL_Msk /*!< Field selects between 0 to 9 dB of EQ for USB3.1 SSTXP/N receiver */ +#define TUSB546_USB3_CTRL2_SSEQ_SEL_0 (0x1 << TUSB546_USB3_CTRL2_SSEQ_SEL_Pos) /*!< 0x01 */ +#define TUSB546_USB3_CTRL2_SSEQ_SEL_1 (0x2 << TUSB546_USB3_CTRL2_SSEQ_SEL_Pos) /*!< 0x02 */ +#define TUSB546_USB3_CTRL2_SSEQ_SEL_2 (0x4 << TUSB546_USB3_CTRL2_SSEQ_SEL_Pos) /*!< 0x04 */ +#define TUSB546_USB3_CTRL2_SSEQ_SEL_4 (0x8 << TUSB546_USB3_CTRL2_SSEQ_SEL_Pos) /*!< 0x08 */ + +/******************** Bit definition for USB3_CTRL3 register ****************/ +#define TUSB546_REG_USB3_CTRL3_COMPLIANCE_Pos (0U) +#define TUSB546_REG_USB3_CTRL3_COMPLIANCE_Msk (0x3U << TUSB546_REG_USB3_CTRL3_COMPLIANCE_Pos) /*!< 0x03 */ +#define TUSB546_REG_USB3_CTRL3_COMPLIANCE TUSB546_REG_USB3_CTRL3_COMPLIANCE_Msk /*!< Compliance mode */ +#define TUSB546_REG_USB3_CTRL3_COMPLIANCE_0 (0x1 << TUSB546_REG_USB3_CTRL3_COMPLIANCE_Pos) /*!< 0x01 */ +#define TUSB546_REG_USB3_CTRL3_COMPLIANCE_1 (0x2 << TUSB546_REG_USB3_CTRL3_COMPLIANCE_Pos) /*!< 0x02 */ +#define TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_Pos (2U) +#define TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_Msk (0x3U << TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_Pos) /*!< 0x0C */ +#define TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_Msk /*!< Rx.Detect interval for the Downstream facing port */ +#define TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_0 (0x1 << TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_Pos) /*!< 0x04 */ +#define TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_1 (0x2 << TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_Pos) /*!< 0x08 */ +#define TUSB546_REG_USB3_CTRL3_DISABLE_U2U3_RXDET_Pos (4U) +#define TUSB546_REG_USB3_CTRL3_DISABLE_U2U3_RXDET_Msk (0x1U << TUSB546_REG_USB3_CTRL3_DISABLE_U2U3_RXDET_Pos) /*!< 0x10 */ +#define TUSB546_REG_USB3_CTRL3_DISABLE_U2U3_RXDET TUSB546_REG_USB3_CTRL3_DISABLE_U2U3_RXDET_Msk /*!< Rx.Detect in U2/U3 disabled */ +#define TUSB546_REG_USB3_CTRL3_U2U3_LFPS_DEBOUNCE_Pos (5U) +#define TUSB546_REG_USB3_CTRL3_U2U3_LFPS_DEBOUNCE_Msk (0x1U << TUSB546_REG_USB3_CTRL3_U2U3_LFPS_DEBOUNCE_Pos) /*!< 0x20 */ +#define TUSB546_REG_USB3_CTRL3_U2U3_LFPS_DEBOUNCE TUSB546_REG_USB3_CTRL3_U2U3_LFPS_DEBOUNCE_Msk /*!< Debounce of LFPS before U2/U3 exit enabled */ +#define TUSB546_REG_USB3_CTRL3_LFPS_EQ_Pos (6U) +#define TUSB546_REG_USB3_CTRL3_LFPS_EQ_Msk (0x1U << TUSB546_REG_USB3_CTRL3_LFPS_EQ_Pos) /*!< 0x40 */ +#define TUSB546_REG_USB3_CTRL3_LFPS_EQ TUSB546_REG_USB3_CTRL3_LFPS_EQ_Msk /*!< EQ settings control */ +#define TUSB546_REG_USB3_CM_ACTIVE_EQ_Pos (7U) +#define TUSB546_REG_USB3_CM_ACTIVE_EQ_Msk (0x1U << TUSB546_REG_USB3_CM_ACTIVE_EQ_Pos) /*!< 0x80 */ +#define TUSB546_REG_USB3_CM_ACTIVE_EQ TUSB546_REG_USB3_CM_ACTIVE_EQ_Msk /*!< USB 3.1 compliance mode */ + +/** @defgroup TUSB546_MODE TUSB546 functioning mode + * @{ + */ +#define TUSB546_MODE_DISABLED 0x0U +#define TUSB546_MODE_USB3_ONLY TUSB546_REG_CTRL_CTLSEL_0 +#define TUSB546_MODE_FOUR_DPLANES TUSB546_REG_CTRL_CTLSEL_1 +#define TUSB546_MODE_TWO_DPLANES_USB3 TUSB546_REG_CTRL_CTLSEL +/** + * @} + */ + +/** @defgroup TUSB546_ORIENTATION TUSB546 Type-C Cable Orientation + * @{ + */ +#define TUSB546_ORIENTATION_NORMAL 0x0U +#define TUSB546_ORIENTATION_FLIPPED TUSB546_REG_CTRL_FLIPSEL +/** + * @} + */ + +/** @defgroup TUSB546_DPLANE DP Lane Identifier + * @{ + */ +#define TUSB546_DPLANE_0 0x0U +#define TUSB546_DPLANE_1 0x2U +#define TUSB546_DPLANE_2 0x4U +#define TUSB546_DPLANE_3 0x8U +#define TUSB546_DPLANE_ALL 0xFU +/** + * @} + */ + +/** @defgroup TUSB546_USBSIGNAL TUSB546 USB 3.1 signal identifier + * @{ + */ +#define TUSB546_USBSIGNAL_RX1 0x0U +#define TUSB546_USBSIGNAL_RX2 0x1U +#define TUSB546_USBSIGNAL_SSTX 0x2U +/** + * @} + */ + +/** @defgroup TUSB546_EQGAIN TUSB546 Equalizer Gain + * @{ + .------------------------.-------------------------.-------------------------.------------------------. + | Equalization setting # | USB3.1 DFP EQ Gain (dB) | USB3.1 UFP EQ Gain (dB) | DISPLAYPORT LANES (dB) | + '------------------------'-------------------------'-------------------------'------------------------' + | 0 | 0.2 | -1.6 | 1.0 | + | 1 | 1.2 | -0.5 | 3.3 | + | 2 | 2.2 | 0.5 | 4.9 | + | 3 | 3.3 | 1.6 | 6.5 | + | 4 | 4.2 | 2.4 | 7.5 | + | 5 | 5.1 | 3.4 | 8.6 | + | 6 | 5.9 | 4.1 | 9.5 | + | 7 | 6.7 | 4.9 | 10.4 | + | 8 | 7.4 | 5.7 | 11.1 | + | 9 | 8.1 | 6.4 | 11.7 | + | 10 | 8.7 | 6.9 | 12.3 | + | 11 | 9.3 | 7.5 | 12.8 | + | 12 | 9.7 | 8.0 | 13.2 | + | 13 | 10.2 | 8.5 | 13.6 | + | 14 | 10.6 | 8.9 | 14.0 | + | 15 | 11.1 | 9.4 | 14.4 | + '------------------------'-------------------------'-------------------------'------------------------' + */ +#define TUSB546_EQGAIN_0 0x0U +#define TUSB546_EQGAIN_1 0x1U +#define TUSB546_EQGAIN_2 0x2U +#define TUSB546_EQGAIN_3 0x3U +#define TUSB546_EQGAIN_4 0x4U +#define TUSB546_EQGAIN_5 0x5U +#define TUSB546_EQGAIN_6 0x6U +#define TUSB546_EQGAIN_7 0x7U +#define TUSB546_EQGAIN_8 0x8U +#define TUSB546_EQGAIN_9 0x9U +#define TUSB546_EQGAIN_10 0xAU +#define TUSB546_EQGAIN_11 0xBU +#define TUSB546_EQGAIN_12 0xCU +#define TUSB546_EQGAIN_13 0xDU +#define TUSB546_EQGAIN_14 0xEU +#define TUSB546_EQGAIN_15 0xFU +/** + * @} + */ + +/** @defgroup TUSB546_DPCDREG TUSB546 Display Port Configuration Data (DPCD) register identifier + * @{ + */ +#define TUSB546_DPCDREG_LANE_COUNT_SET 0x0U +#define TUSB546_DPCDREG_SET_POWER 0x1U +/** + * @} + */ + +/** @defgroup TUSB546_AUXTOSBU TUSB546 AUXp or AUXn to SBU1 or SBU2 connect/disconnect override + * @{ + */ +#define TUSB546_AUXTOSBU_DEFAULT 0x0U +#define TUSB546_AUXTOSBU_OVERRIDE 0x1U +#define TUSB546_AUXTOSBU_OPEN 0x2U +/** + * @} + */ + +/** @defgroup TUSB546_USB3_COMPLIANCEMODE USB 3.1 Compliance mode + * @{ + */ +#define TUSB546_USB3_COMPLIANCEMODE_FSM 0x0U +#define TUSB546_USB3_COMPLIANCEMODE_DFP TUSB546_REG_USB3_CTRL3_COMPLIANCE_0 +#define TUSB546_USB3_COMPLIANCEMODE_UFP TUSB546_REG_USB3_CTRL3_COMPLIANCE_1 +#define TUSB546_USB3_COMPLIANCEMODE_DISABLED TUSB546_REG_USB3_CTRL3_COMPLIANCE +/** + * @} + */ + +/** @defgroup TUSB546_RXDET_INTERVAL USB 3.1 Rx.Detect interval for the Downstream facing port (TX1P/N and TX2P/N) + * @{ + */ +#define TUSB546_RXDET_INTERVAL_8MS 0x0U +#define TUSB546_RXDET_INTERVAL_12MS TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_0 +#define TUSB546_RXDET_INTERVAL_48MS TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL_1 +#define TUSB546_RXDET_INTERVAL_96MS TUSB546_REG_USB3_CTRL3_DFP_RXDET_INTERVAL +/** + * @} + */ + +/** + * @} + */ + +#if defined(TUSB546_DEBUG) +/** @defgroup TUSB546_Exported_Structure TUSB546 Exported Structure + * @{ + */ + +typedef union { + uint8_t Register; + struct { + uint8_t CTLSEL:2; + uint8_t FLIPSEL:1; + uint8_t HPDIN_OVRRIDE:1; + uint8_t EQ_OVERRIDE:1; + uint8_t SWAP_HPDIN :1; + uint8_t Reserved:2; + }; +} TUSB546_GeneralRegTypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t DP0EQ_SEL:4; + uint8_t DP1EQ_SEL:4; + }; +} TUSB546_DPCtrlStatusReg10TypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t DP2EQ_SEL:4; + uint8_t DP3EQ_SEL:4; + }; +} TUSB546_DPCtrlStatusReg11TypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t LANE_COUNT_SET :5; + uint8_t SET_POWER_STATE :2; + uint8_t Reserved :1; + }; +} TUSB546_DPCtrlStatusReg12TypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t DP0_DISABLE :1; + uint8_t DP1_DISABLE :1; + uint8_t DP2_DISABLE :1; + uint8_t DP3_DISABLE :1; + uint8_t AUX_SBU_OVR :2; + uint8_t Reserved :1; + uint8_t AUX_SNOOP_DISABLE :1; + }; +} TUSB546_DPCtrlStatusReg13TypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t Reserved :8; + }; +} TUSB546_USBCtrlStatusReg20TypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t Reserved :8; + }; +} TUSB546_USBCtrlStatusReg21TypeDef; + +typedef union { + uint8_t Register; + struct { + uint8_t Reserved :8; + }; +} TUSB546_USBCtrlStatusReg22TypeDef; + +typedef struct +{ + TUSB546_GeneralRegTypeDef General; /*!< General Registers (0x0A) */ + TUSB546_DPCtrlStatusReg10TypeDef DPCtrlStatus10; /*!< DisplayPort Control/Status Registers (0x10)*/ + TUSB546_DPCtrlStatusReg11TypeDef DPCtrlStatus11; /*!< DisplayPort Control/Status Registers (0x11)*/ + TUSB546_DPCtrlStatusReg12TypeDef DPCtrlStatus12; /*!< DisplayPort Control/Status Registers (0x12) */ + TUSB546_DPCtrlStatusReg13TypeDef DPCtrlStatus13; /*!< DisplayPort Control/Status Registers (0x13) */ + TUSB546_USBCtrlStatusReg20TypeDef USBCtrlStatus20;/*!< USB3.1 Control/Status Registers (0x20) */ + TUSB546_USBCtrlStatusReg21TypeDef USBCtrlStatus21;/*!< USB3.1 Control/Status Registers (0x21) */ + TUSB546_USBCtrlStatusReg22TypeDef USBCtrlStatus22;/*!< USB3.1 Control/Status Registers (0x22) */ +} TUSB546_RegistersTypeDef; +/** + * @} + */ +#endif /* TUSB546_DEBUG */ + +/** @defgroup TUSB546_Exported_Functions + * @{ + */ +/* USB Type-C cross switch management functions */ +uint32_t tusb546_CrossSwitch_Init(uint16_t Address); +void tusb546_CrossSwitch_DeInit(uint16_t Address); +uint32_t tusb546_CrossSwitch_PowerOn(uint16_t Address); +uint32_t tusb546_CrossSwitch_PowerOff(uint16_t Address); +uint32_t tusb546_CrossSwitch_SetMode(uint16_t Address, TYPECSWITCH_Mode_t Mode); +uint32_t tusb546_CrossSwitch_IsSupportedMode(TYPECSWITCH_Mode_t Mode); + +/* DisplayPort Linear Redriver management functions */ +uint32_t tusb546_DPRedriver_Init(uint16_t Address); +void tusb546_DPRedriver_DeInit(uint16_t Address); +uint32_t tusb546_DPRedriver_PowerOn(uint16_t Address); +uint32_t tusb546_DPRedriver_PowerOff(uint16_t Address); +uint32_t tusb546_DPRedriver_SetEQGain(uint16_t Address, DPREDRIVER_ChannelId_t ChannelId, uint8_t EQGain); +uint32_t tusb546_DPRedriver_EnableChannel(uint16_t Address, DPREDRIVER_ChannelId_t ChannelId); +uint32_t tusb546_DPRedriver_DisableChannel(uint16_t Address, DPREDRIVER_ChannelId_t ChannelId); + +/* MUX IO functions */ +uint8_t MUX_IO_Init(void); +void MUX_IO_DeInit(void); +uint8_t MUX_IO_Write(uint16_t Addr, uint16_t Reg, uint8_t Data); +uint8_t MUX_IO_Read(uint16_t Addr, uint16_t Reg, uint8_t *pData); +uint32_t MUX_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials); + +/** + * @} + */ + +/** @defgroup TUSB546_Exported_Variables + * @{ + */ +/* USB Type-C crossbar switch driver structure */ +extern TYPECSWITCH_Drv_t tusb546_drv_CrossSwitch; + +/* Displayport Linear Redriver driver structure */ +extern DPREDRIVER_Drv_t tusb546_drv_LinearRedriver; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus + } +#endif + +#endif /* TUSB546_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/License.md b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/License.md new file mode 100644 index 0000000..c7f3b96 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/License.md @@ -0,0 +1,3 @@ +# Copyright (c) 2020 STMicroelectronics + +This software component is licensed by STMicroelectronics under the **BSD-3-Clause** license. You may not use this software except in compliance with this license. You may obtain a copy of the license [here](https://opensource.org/licenses/BSD-3-Clause). \ No newline at end of file diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/Release_Notes.html b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/Release_Notes.html new file mode 100644 index 0000000..acbe88d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/Release_Notes.html @@ -0,0 +1,63 @@ + + + + + + + Release Notes for STM32G0C1E-EV Board drivers + + + + + + +
+
+
+

Release Notes for STM32G0C1E-EV Board drivers

+

Copyright © 2020 STMicroelectronics
+

+ +
+

License

+

This software component is licensed by ST under BSD 3-Clause license, the “Licenseâ€; You may not use this component except in compliance with the License. You may obtain a copy of the License at:

+

https://opensource.org/licenses/BSD-3-Clause

+

Purpose

+

This driver provides a set of functions to manage:

+
    +
  • LEDs, Buttons, SD card, temperature sensor, LCD, MUX and PWR on STM32G0C1E-EV board from STMicroelectronics
    • +
+
+
+

Update History

+
+ +
+

Main Changes

+

First release

+

Contents

+

First official release of STM32G0C1E-EV board drivers for STM32Cube G0 FW package.

+

Supported Devices and Boards

+
    +
  • STM32G0C1xx/B1xx devices
    • +
  • STM32G0C1E-EV mother board (MB1581B)
    • +
  • “Legacy†daughter board (MB1351A)
    • +
  • USBPD daughter board (MB1352C)
    • +
+
+
+
+
+
+

For complete documentation on STM32G0xx, visit: [www.st.com/stm32g0]

+This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. +
+ + diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/STM32g0c1e-ev_BSP_User_Manual.chm b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/STM32g0c1e-ev_BSP_User_Manual.chm new file mode 100644 index 0000000..31a7555 Binary files /dev/null and b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/STM32g0c1e-ev_BSP_User_Manual.chm differ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/favicon.png b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/favicon.png new file mode 100644 index 0000000..06713ee Binary files /dev/null and b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/favicon.png differ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/mini-st_2020.css b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/mini-st_2020.css new file mode 100644 index 0000000..edbc116 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/mini-st_2020.css @@ -0,0 +1,1703 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} \ No newline at end of file diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/st_logo_2020.png b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/st_logo_2020.png new file mode 100644 index 0000000..d6cebb5 Binary files /dev/null and b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/_htmresc/st_logo_2020.png differ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval.c b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval.c new file mode 100644 index 0000000..f59bcd9 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval.c @@ -0,0 +1,1626 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval.c + * @author MCD Application Team + * @brief This file provides: a set of firmware functions to manage Leds, + * push-button and COM ports + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0c1e_eval.h" + +/** @addtogroup BSP +* @{ +*/ + +/** @addtogroup STM32G0C1E_EVAL + * @brief This file provides firmware functions to manage Leds, push-buttons, + * COM ports, SD card on SPI and temperature sensor (LM75) available on + * STM32G0C1E-EV evaluation board from STMicroelectronics. + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL_Common + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL_Private_Constants + * @{ + */ +/* LINK LCD */ +#define START_BYTE 0x70 +#define SET_INDEX 0x00 +#define READ_STATUS 0x01 +#define LCD_WRITE_REG 0x02 +#define LCD_READ_REG 0x03 + +/* LINK SD Card */ +#define SD_DUMMY_BYTE 0xFF +#define SD_NO_RESPONSE_EXPECTED 0x80 + +/* Vref voltage level (in mV) */ +#define VREFANALOG_VOLTAGE 3300 + +/* Legacy daughter board detection voltage level (in mV) */ +#define DB_LEGACY_DETECT_VOLTAGE 1100 + +/* UCPD daughter board revB detection voltage level (in mV) */ +#define DB_UCPD_A_B_DETECT_VOLTAGE 1650 + +/* UCPD daughter board rev C detection voltage level (in mV) */ +#define DB_UCPD_C_DETECT_VOLTAGE 1320 + +/** + * @brief STM32G0C1E EVAL BSP Driver version number + */ +#define __STM32G0C1E_EVAL_BSP_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32G0C1E_EVAL_BSP_VERSION_SUB1 (0x00U) /*!< [23:16] sub1 version */ +#define __STM32G0C1E_EVAL_BSP_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32G0C1E_EVAL_BSP_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32G0C1E_EVAL_BSP_VERSION ((__STM32G0C1E_EVAL_BSP_VERSION_MAIN << 24) |\ + (__STM32G0C1E_EVAL_BSP_VERSION_SUB1 << 16) |\ + (__STM32G0C1E_EVAL_BSP_VERSION_SUB2 << 8 ) |\ + (__STM32G0C1E_EVAL_BSP_VERSION_RC)) + +#if defined(_GUI_INTERFACE) +const uint8_t HWBoardVersionName[] = "STM32G0C1E-EV"; +const uint8_t PDTypeName[] = "MB1581B"; +#endif /* _GUI_INTERFACE */ +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_Private_Variables +* @{ +*/ +/** +* @brief LED variables +*/ +GPIO_TypeDef* LED_PORT[LEDn] = { + LED1_GPIO_PORT, + LED2_GPIO_PORT, + LED3_GPIO_PORT, + LED4_GPIO_PORT +}; + +const uint16_t LED_PIN[LEDn] = { + LED1_PIN, + LED2_PIN, + LED3_PIN, + LED4_PIN +}; + +/** +* @brief BUTTON variables +*/ +GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {TAMPER_BUTTON_GPIO_PORT}; +const uint16_t BUTTON_PIN[BUTTONn] = {TAMPER_BUTTON_PIN}; +const uint8_t BUTTON_IRQn[BUTTONn] = {TAMPER_BUTTON_EXTI_IRQn}; + +/** +* @brief JOYSTICK variables +*/ +GPIO_TypeDef* JOY_PORT[JOYn] = { + SEL_JOY_GPIO_PORT, + DOWN_JOY_GPIO_PORT, + LEFT_JOY_GPIO_PORT, + RIGHT_JOY_GPIO_PORT, + UP_JOY_GPIO_PORT +}; + +const uint16_t JOY_PIN[JOYn] = { + SEL_JOY_PIN, + DOWN_JOY_PIN, + LEFT_JOY_PIN, + RIGHT_JOY_PIN, + UP_JOY_PIN +}; + +const uint8_t JOY_IRQn[JOYn] = { + SEL_JOY_EXTI_IRQn, + DOWN_JOY_EXTI_IRQn, + LEFT_JOY_EXTI_IRQn, + RIGHT_JOY_EXTI_IRQn, + UP_JOY_EXTI_IRQn +}; + + +/** + * @brief COM variables + */ +#ifdef HAL_UART_MODULE_ENABLED +USART_TypeDef* COM_USART[COMn] = {EVAL_COM1}; + +GPIO_TypeDef* COM_TX_PORT[COMn] = {EVAL_COM1_TX_GPIO_PORT}; + +GPIO_TypeDef* COM_RX_PORT[COMn] = {EVAL_COM1_RX_GPIO_PORT}; + +const uint16_t COM_TX_PIN[COMn] = {EVAL_COM1_TX_PIN}; + +const uint16_t COM_RX_PIN[COMn] = {EVAL_COM1_RX_PIN}; + +const uint16_t COM_TX_AF[COMn] = {EVAL_COM1_TX_AF}; + +const uint16_t COM_RX_AF[COMn] = {EVAL_COM1_RX_AF}; + +#endif /*HAL_UART_MODULE_ENABLED*/ + +/** + * @brief BUS variables + */ +#if defined(HAL_I2C_MODULE_ENABLED) +uint32_t I2c1Timeout = EVAL_I2C1_TIMEOUT_MAX; /*Instance = COM_USART[COM]; + HAL_UART_Init(huart); +} +#endif /* HAL_UART_MODULE_ENABLED */ + +#if defined(HAL_ADC_MODULE_ENABLED) +/** + * @brief Identifies of the daughter baord connected to the daughter board connectors. + * @note The voltage level measured at PB11 (ADC_IN15 ) determines the type of + * daughter board connected to the daughter board connectors. + * 0 V on ADC_IN15: There is no daughter board. + * 1.1 V on ADC_IN15: Legacy daughter board + * 1.65 V on ADC_IN15: USB daughter board + * @note A 1% margin is applied to voltage level detection + * @param pDaughterBoardId : pointer to the daughter board identifier + * This parameter can be one of the following values: + * DB_ID_NONE + * DB_ID_LEGACY + * DB_ID_UCPD + * @retval Result 0 : execution successful + * else : execution failed + */ +uint8_t BSP_DB_GetId(DBId_TypeDef *pDaughterBoardId) +{ + uint8_t error = 0; + GPIO_InitTypeDef gpio_config = {0}; + ADC_HandleTypeDef hadc = {0}; + ADC_ChannelConfTypeDef adc_channel_config = {0}; + uint32_t voltage; + + /* Initialize output argument */ + *pDaughterBoardId = DB_ID_NONE; + + /* Enable GPIO clock */ + DB_DETECT_GPIO_CLK_ENABLE(); + + /* Configure GPIO pin of the selected ADC channel */ + gpio_config.Pin = DB_DETECT_PIN; + gpio_config.Mode = GPIO_MODE_ANALOG; + gpio_config.Pull = GPIO_NOPULL; + HAL_GPIO_Init(DB_DETECT_GPIO_PORT, &gpio_config); + + /* Enable ADC clock */ + DB_ADC_CLK_ENABLE(); + + /* Initialize ADC */ + hadc.Instance = DB_ADC; + + if (HAL_ADC_DeInit(&hadc) != HAL_OK) + { + /* ADC de-initialization Error */ + error++; + } + + hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4; + hadc.Init.Resolution = ADC_RESOLUTION_12B; + hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD; + hadc.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc.Init.LowPowerAutoWait = DISABLE; + hadc.Init.LowPowerAutoPowerOff = DISABLE; + hadc.Init.ContinuousConvMode = ENABLE; + hadc.Init.DiscontinuousConvMode = DISABLE; + hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START; + hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; + hadc.Init.DMAContinuousRequests = DISABLE; + hadc.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; + hadc.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_39CYCLES_5; + hadc.Init.OversamplingMode = DISABLE; + + if (HAL_ADC_Init(&hadc) != HAL_OK) + { + error++; + } + + /* Run the ADC calibration */ + if (HAL_ADCEx_Calibration_Start(&hadc) != HAL_OK) + { + error++; + } + + /* Configure the ADC channel used to identify the daughter board */ + adc_channel_config.Channel = DB_ADC_CHANNEL; + adc_channel_config.Rank = ADC_RANK_CHANNEL_NUMBER; + adc_channel_config.SamplingTime = ADC_SAMPLINGTIME_COMMON_1; + + if (HAL_ADC_ConfigChannel(&hadc, &adc_channel_config) != HAL_OK) + { + error++; + } + + /* Start conversion */ + if (HAL_ADC_Start(&hadc) != HAL_OK) + { + error++; + } + + /* Wait for conversion completion */ + if (HAL_ADC_PollForConversion(&hadc, 10) != HAL_OK) + { + error++; + } + + /* Translate ADC conversion into voltage level */ + voltage = __HAL_ADC_CALC_DATA_TO_VOLTAGE(VREFANALOG_VOLTAGE, + HAL_ADC_GetValue(&hadc), + hadc.Init.Resolution); + + /* Set output argument according to measured voltage level */ + if (voltage < (DB_LEGACY_DETECT_VOLTAGE - DB_LEGACY_DETECT_VOLTAGE/100)) + { + *pDaughterBoardId = DB_ID_NONE; + } + else if (voltage < (DB_UCPD_C_DETECT_VOLTAGE - DB_UCPD_C_DETECT_VOLTAGE/100)) + { + *pDaughterBoardId = DB_ID_LEGACY; + } + else if (voltage < (DB_UCPD_A_B_DETECT_VOLTAGE - DB_UCPD_A_B_DETECT_VOLTAGE/100)) + { + *pDaughterBoardId = DB_ID_UCPD_C; + } + else + { + *pDaughterBoardId = DB_ID_UCPD_AB; + } + + /* Reset GPIO configuration */ + HAL_GPIO_DeInit(DB_DETECT_GPIO_PORT, gpio_config.Pin); + + /* De-initialize ADC& */ + HAL_ADC_DeInit(&hadc); + + /* Disable ADC clock */ + DB_ADC_CLK_DISABLE(); + + return error; +} +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_BUS_Operations_Functions + * @{ + */ + +/******************************************************************************* + BUS OPERATIONS +*******************************************************************************/ +#if defined(HAL_I2C_MODULE_ENABLED) +/******************************* I2C Routines *********************************/ + +/** + * @brief I2C1 Bus initialization + * @retval None + */ +static HAL_StatusTypeDef I2C1_Init(void) +{ + HAL_StatusTypeDef result = HAL_OK; + + if(HAL_I2C_GetState(&heval_I2c1) == HAL_I2C_STATE_RESET) + { + heval_I2c1.Instance = EVAL_I2C1; + heval_I2c1.Init.Timing = I2C1_TIMING; + heval_I2c1.Init.OwnAddress1 = 0; + heval_I2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + heval_I2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + heval_I2c1.Init.OwnAddress2 = 0; + heval_I2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK; + heval_I2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + heval_I2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + + /* Init the I2C */ + I2C1_MspInit(&heval_I2c1); + result = HAL_I2C_Init(&heval_I2c1); + } + + /* Increment I2C1 reference counter */ + I2c1RefCounter++; + + return result; +} + +/** + * @brief I2C1 Bus De-initialization + * @retval None + */ +static void I2C1_DeInit(void) +{ + I2c1RefCounter--; + + /* De-initialize I2C1 (if not used for any other device */ + if (I2c1RefCounter == 0) + { + HAL_I2C_DeInit(&heval_I2c1); + } +} + +/** + * @brief Reads multiple data on the BUS. + * @param Addr : I2C Address + * @param Reg : Reg Address + * @param RegSize : The target register size (can be 8BIT or 16BIT) + * @param pBuffer : pointer to read data buffer + * @param Length : length of the data + * @retval 0 if no problems to read multiple data + */ +static HAL_StatusTypeDef I2C1_ReadBuffer(uint16_t Addr, uint8_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + status = HAL_I2C_Mem_Read(&heval_I2c1, Addr, Reg, RegSize, pBuffer, Length, I2c1Timeout); + + /* Check the communication status */ + if(status != HAL_OK) + { + /* Re-Initiaize the BUS */ + I2C1_Error(); + } + return status; +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param DevAddress: Target device address + * @param Trials: Number of trials + * @retval HAL status + */ +static HAL_StatusTypeDef I2C1_IsDeviceReady(uint16_t DevAddress, uint32_t Trials) +{ + return (HAL_I2C_IsDeviceReady(&heval_I2c1, DevAddress, Trials, I2c1Timeout)); +} + +/** + * @brief Write a value in a register of the device through BUS. + * @param Addr: Device address on BUS Bus. + * @param Reg: The target register address to write + * @param RegSize: The target register size (can be 8BIT or 16BIT) + * @param pBuffer: The target register value to be written + * @param Length: buffer size to be written + * @retval None + */ +static HAL_StatusTypeDef I2C1_WriteBuffer(uint16_t Addr, uint8_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + status = HAL_I2C_Mem_Write(&heval_I2c1, Addr, Reg, RegSize, pBuffer, Length, I2c1Timeout); + + /* Check the communication status */ + if(status != HAL_OK) + { + /* Re-Initiaize the BUS */ + I2C1_Error(); + } + return status; +} + +/** + * @brief Write buffer through I2C. + * @param pBuffer: The address of the data to be written + * @param Length: buffer size to be written + * @retval None + */ +static HAL_StatusTypeDef I2C1_TransmitData(uint8_t *pBuffer, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + status = HAL_I2C_Slave_Transmit(&heval_I2c1, pBuffer, Length, I2c1Timeout); + + /* Check the communication status */ + if(status != HAL_OK) + { + /* Execute user timeout callback */ + I2C1_Error(); + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Manages error callback by re-initializing I2C. + * @retval None + */ +static void I2C1_Error(void) +{ + /* De-initialize the I2C communication BUS */ + HAL_I2C_DeInit(&heval_I2c1); + + /* Re-Initiaize the I2C communication BUS */ + I2C1_Init(); +} + +/** + * @brief I2C MSP Initialization + * @param hi2c: I2C handle + * @retval None + */ +static void I2C1_MspInit(I2C_HandleTypeDef *hi2c) +{ + GPIO_InitTypeDef GPIO_InitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct; + + /*##-1- Set source clock to SYSCLK for I2C1 ################################################*/ + RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2C1; + RCC_PeriphCLKInitStruct.I2c1ClockSelection = RCC_I2C1CLKSOURCE_SYSCLK; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); + + /*##-2- Configure the GPIOs ################################################*/ + + /* Enable GPIO clock */ + EVAL_I2C1_GPIO_CLK_ENABLE(); + + /* Configure I2C SCL & SDA as alternate function */ + GPIO_InitStruct.Pin = (EVAL_I2C1_SCL_PIN| EVAL_I2C1_SDA_PIN); + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = EVAL_I2C1_SCL_SDA_AF; + HAL_GPIO_Init(EVAL_I2C1_GPIO_PORT, &GPIO_InitStruct); + + /*##-3- Configure the Eval I2C peripheral #######################################*/ + /* Enable I2C clock */ + EVAL_I2C1_CLK_ENABLE(); + + /* Force the I2C peripheral clock reset */ + EVAL_I2C1_FORCE_RESET(); + + /* Release the I2C peripheral clock reset */ + EVAL_I2C1_RELEASE_RESET(); +} + +/** + * @brief I2C Bus initialization + * @retval None + */ +static void I2C2_Init(void) +{ + if(HAL_I2C_GetState(&heval_I2c2) == HAL_I2C_STATE_RESET) + { + heval_I2c2.Instance = EVAL_I2C2; + heval_I2c2.Init.Timing = I2C2_TIMING; + heval_I2c2.Init.OwnAddress1 = 0; + heval_I2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + heval_I2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + heval_I2c2.Init.OwnAddress2 = 0; + heval_I2c2.Init.OwnAddress2Masks = I2C_OA2_NOMASK; + heval_I2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + heval_I2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + + /* Init the I2C */ + I2C2_MspInit(&heval_I2c2); + HAL_I2C_Init(&heval_I2c2); + } +} + +/** + * @brief Read a register of the device through I2C. + * @param Addr: Device address on I2C Bus. + * @param pBuffer: The address to store the read data + * @param Length: buffer size to be read + * @retval None + */ +static HAL_StatusTypeDef I2C2_ReceiveData(uint16_t Addr, uint8_t * pBuffer, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + status = HAL_I2C_Master_Receive(&heval_I2c2, Addr, pBuffer, Length, I2c2Timeout); + + /* Check the communication status */ + if(status != HAL_OK) + { + /* Execute user timeout callback */ + I2C2_Error(); + } + return status; +} + +/** + * @brief Discovery I2C2 error treatment function + * @retval None + */ +static void I2C2_Error(void) +{ + /* De-initialize the I2C communication BUS */ + HAL_I2C_DeInit(&heval_I2c2); + + /* Re-Initiaize the I2C communication BUS */ + I2C2_Init(); +} + +/** + * @brief I2C MSP Initialization + * @param hi2c: I2C handle + * @retval None + */ +static void I2C2_MspInit(I2C_HandleTypeDef *hi2c) +{ + GPIO_InitTypeDef GPIO_InitStruct; + /* Enable GPIO clock */ + EVAL_I2C2_GPIO_CLK_ENABLE(); + + /* Configure I2C SCL and SDA as alternate function */ + GPIO_InitStruct.Pin = (EVAL_I2C2_SCL_PIN | EVAL_I2C2_SDA_PIN); + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = EVAL_I2C2_AF; + HAL_GPIO_Init(EVAL_I2C2_GPIO_PORT, &GPIO_InitStruct); + + /* Enable I2C clock */ + EVAL_I2C2_CLK_ENABLE(); + + /* Force the I2C peripheral clock reset */ + EVAL_I2C2_FORCE_RESET(); + + /* Release the I2C peripheral clock reset */ + EVAL_I2C2_RELEASE_RESET(); +} +#endif /*HAL_I2C_MODULE_ENABLED*/ + +#if defined(HAL_SPI_MODULE_ENABLED) +/******************************* SPI Routines *********************************/ + +/** + * @brief SPIx Bus initialization + * @retval None + */ +static void SPIx_Init(void) +{ + if(HAL_SPI_GetState(&heval_Spi) == HAL_SPI_STATE_RESET) + { + /* SPI Config */ + heval_Spi.Instance = EVAL_SPIx; + /* SPI baudrate is set to 12 MHz (PCLK1/SPI_BaudRatePrescaler = 48/4 = 12 MHz) + to verify these constraints: + HX8347D LCD SPI interface max baudrate is 50MHz for write and 6.66MHz for read + PCLK1 frequency is set to 48 MHz + - SD card SPI interface max baudrate is 25MHz for write/read + */ + heval_Spi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4; + heval_Spi.Init.Direction = SPI_DIRECTION_2LINES; + heval_Spi.Init.CLKPhase = SPI_PHASE_2EDGE; + heval_Spi.Init.CLKPolarity = SPI_POLARITY_HIGH; + heval_Spi.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + heval_Spi.Init.CRCPolynomial = 7; + heval_Spi.Init.DataSize = SPI_DATASIZE_8BIT; + heval_Spi.Init.FirstBit = SPI_FIRSTBIT_MSB; + heval_Spi.Init.NSS = SPI_NSS_SOFT; + heval_Spi.Init.TIMode = SPI_TIMODE_DISABLE; + heval_Spi.Init.Mode = SPI_MODE_MASTER; + + SPIx_MspInit(&heval_Spi); + HAL_SPI_Init(&heval_Spi); + } +} + +/** + * @brief SPI Read 4 bytes from device + * @retval Read data + */ +static uint32_t SPIx_Read(void) +{ + HAL_StatusTypeDef status; + uint32_t readvalue = 0x0; + uint32_t writevalue = 0xFFFFFFFF; + + status = HAL_SPI_TransmitReceive(&heval_Spi, (uint8_t*) &writevalue, (uint8_t*) &readvalue, 1, SpixTimeout); + + /* Check the communication status */ + if(status != HAL_OK) + { + /* Execute user timeout callback */ + SPIx_Error(); + } + + return readvalue; +} + +/** + * @brief SPI Write a byte to device + * @param DataIn: value to be written + * @param DataOut: read value + * @param DataLegnth: data length + * @retval None + */ +static void SPIx_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLegnth) +{ + HAL_StatusTypeDef status; + + status = HAL_SPI_TransmitReceive(&heval_Spi, (uint8_t*) DataIn, DataOut, DataLegnth, SpixTimeout); + + /* Check the communication status */ + if(status != HAL_OK) + { + /* Execute user timeout callback */ + SPIx_Error(); + } +} + +/** + * @brief SPI Write a byte to device + * @param Value: value to be written + * @retval None + */ +static void SPIx_Write(uint8_t Value) +{ + HAL_StatusTypeDef status; + + status = HAL_SPI_Transmit(&heval_Spi, (uint8_t*) &Value, 1, SpixTimeout); + + /* Check the communication status */ + if(status != HAL_OK) + { + /* Execute user timeout callback */ + SPIx_Error(); + } +} + +/** + * @brief SPI error treatment function + * @retval None + */ +static void SPIx_Error (void) +{ + /* De-initialize the SPI communication BUS */ + HAL_SPI_DeInit(&heval_Spi); + + /* Re- Initiaize the SPI communication BUS */ + SPIx_Init(); +} + +/** + * @brief SPI MSP Init + * @param hspi: SPI handle + * @retval None + */ +static void SPIx_MspInit(SPI_HandleTypeDef *hspi) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Enable SPI clock */ + EVAL_SPIx_CLK_ENABLE(); + + /* enable EVAL_SPI gpio clocks */ + EVAL_SPIx_SCK_GPIO_CLK_ENABLE(); + EVAL_SPIx_MISO_GPIO_CLK_ENABLE(); + EVAL_SPIx_MOSI_GPIO_CLK_ENABLE(); + EVAL_SPIx_MOSI_DIR_GPIO_CLK_ENABLE(); + + /* configure SPI SCK */ + GPIO_InitStruct.Pin = EVAL_SPIx_SCK_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = EVAL_SPIx_SCK_AF; + HAL_GPIO_Init(EVAL_SPIx_SCK_GPIO_PORT, &GPIO_InitStruct); + + /* configure SPI MOSI */ + GPIO_InitStruct.Pin = EVAL_SPIx_MOSI_PIN; + GPIO_InitStruct.Alternate = EVAL_SPIx_MOSI_AF; + HAL_GPIO_Init(EVAL_SPIx_MOSI_GPIO_PORT, &GPIO_InitStruct); + + /* configure SPI MISO */ + GPIO_InitStruct.Pin = EVAL_SPIx_MISO_PIN; + GPIO_InitStruct.Alternate = EVAL_SPIx_MISO_AF; + HAL_GPIO_Init(EVAL_SPIx_MISO_GPIO_PORT, &GPIO_InitStruct); + + /* configure direction pin for MOSI */ + GPIO_InitStruct.Pin = EVAL_SPIx_MOSI_DIR_PIN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(EVAL_SPIx_MOSI_DIR_GPIO_PORT, &GPIO_InitStruct); + + /* MOSI DIRECTION as output */ + HAL_GPIO_WritePin(EVAL_SPIx_MOSI_DIR_GPIO_PORT, EVAL_SPIx_MOSI_DIR_PIN, GPIO_PIN_SET); + + /* Force the SPI peripheral clock reset */ + EVAL_SPIx_FORCE_RESET(); + + /* Release the SPI peripheral clock reset */ + EVAL_SPIx_RELEASE_RESET(); +} + +#endif /*HAL_SPI_MODULE_ENABLED*/ + +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_LINK_Operations_Functions + * @{ + */ + +/****************************************************************************** +LINK OPERATIONS +*******************************************************************************/ + +#if defined(HAL_SPI_MODULE_ENABLED) +/********************************* LINK LCD ***********************************/ + +/** + * @brief Configures the LCD_SPI interface. + * @retval None + */ +void LCD_IO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Configure the LCD Control pins */ + LCD_NCS_GPIO_CLK_ENABLE(); + SD_CS_GPIO_CLK_ENABLE(); + + /* Set chip selects to high before IO init in order to be sure no transition to 0 occurs */ + SD_CS_HIGH(); + LCD_CS_HIGH(); + + /* Configure SD_CS_PIN pin: SD Card CS pin */ + GPIO_InitStruct.Pin = SD_CS_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM; + HAL_GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStruct); + + /* Configure NCS in Output Push-Pull mode */ + GPIO_InitStruct.Pin = LCD_NCS_PIN; + HAL_GPIO_Init(LCD_NCS_GPIO_PORT, &GPIO_InitStruct); + + SPIx_Init(); +} + +/** + * @brief Write register value. + * @param pData Pointer on the register value + * @param Size Size of byte to transmit to the register + * @retval None + */ +void LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size) +{ + uint32_t counter = 0; + + /* Reset LCD control line(/CS) and Send data */ + LCD_CS_LOW(); + + /* Send Start Byte */ + SPIx_Write(START_BYTE | LCD_WRITE_REG); + + if (Size == 1) + { + /* Only 1 byte to be sent to LCD - general interface can be used */ + /* Send Data */ + SPIx_Write(*pData); + } + else + { + for (counter = Size; counter != 0; counter--) + { + while(((heval_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE) + { + } + /* Need to invert bytes for LCD*/ + *((__IO uint8_t*)&heval_Spi.Instance->DR) = *(pData+1); + + while(((heval_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE) + { + } + *((__IO uint8_t*)&heval_Spi.Instance->DR) = *pData; + counter--; + pData += 2; + } + + /* Wait until the bus is ready before releasing Chip select */ + while(((heval_Spi.Instance->SR) & SPI_FLAG_BSY) != RESET) + { + } + } + + /* Reset LCD control line(/CS) and Send data */ + LCD_CS_HIGH(); + + SPIx_Write(0xFF); +} + +/** +* @brief Writes address on LCD register. +* @param Reg: Register to be written + * @retval None + */ +void LCD_IO_WriteReg(uint8_t Reg) +{ + /* Reset LCD control line(/CS) and Send command */ + LCD_CS_LOW(); + + /* Send Start Byte */ + SPIx_Write(START_BYTE | SET_INDEX); + + /* Write 16-bit Reg Index (High Byte is 0) */ + SPIx_Write(0x00); + SPIx_Write(Reg); + + /* Deselect : Chip Select high */ + LCD_CS_HIGH(); +} + +/** +* @brief Read data from LCD data register. +* @param Reg: Register to be read +* @retval readvalue + */ +uint16_t LCD_IO_ReadData(uint16_t Reg) +{ + uint32_t readvalue = 0; + + /* Send Reg value to Read */ + LCD_IO_WriteReg(Reg); + + /* Reset LCD control line(/CS) and Send command */ + LCD_CS_LOW(); + + /* Send Start Byte */ + SPIx_Write(START_BYTE | LCD_READ_REG); + + /* Read Upper Byte */ + SPIx_Write(0xFF); + readvalue = SPIx_Read(); + readvalue = readvalue << 8; + readvalue |= SPIx_Read(); + + HAL_Delay(10); + + /* Deselect : Chip Select high */ + LCD_CS_HIGH(); + return readvalue; +} + +/** + * @brief Wait for loop in ms. + * @param Delay in ms. + */ +void LCD_Delay (uint32_t Delay) +{ + HAL_Delay(Delay); +} + +/******************************** LINK SD Card ********************************/ + +/** + * @brief Initializes the SD Card and put it into StandBy State (Ready for + * data transfer). + * @retval None + */ +void SD_IO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct; + uint8_t counter; + + /* LCD_NCS_PIN, SD_CS_GPIO and SD_DETECT_GPIO Periph clock enable */ + SD_CS_GPIO_CLK_ENABLE(); + SD_DETECT_GPIO_CLK_ENABLE(); + LCD_NCS_GPIO_CLK_ENABLE(); + + /* Set chip selects to high before IO init in order to be sure no transition to 0 occurs */ + SD_CS_HIGH(); + LCD_CS_HIGH(); + + /* Configure LCD_NCS_PIN pin: LCD CS pin */ + GPIO_InitStruct.Pin = LCD_NCS_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM; + HAL_GPIO_Init(LCD_NCS_GPIO_PORT, &GPIO_InitStruct); + + /* Configure SD_CS_PIN pin: SD Card CS pin */ + GPIO_InitStruct.Pin = SD_CS_PIN; + HAL_GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStruct); + + /* Configure SD_DETECT_PIN pin: SD Card detect pin */ + GPIO_InitStruct.Pin = SD_DETECT_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStruct); + + /* Enable and set SD EXTI Interrupt to the lowest priority */ + HAL_NVIC_SetPriority(SD_DETECT_EXTI_IRQn, 0x03, 0); + HAL_NVIC_EnableIRQ(SD_DETECT_EXTI_IRQn); + + /* SD SPI Config */ + SPIx_Init(); + + /* Send dummy byte 0xFF, 10 times with CS high */ + /* Rise CS and MOSI for 80 clocks cycles */ + for (counter = 0; counter <= 9; counter++) + { + /* Send dummy byte 0xFF */ + SD_IO_WriteByte(SD_DUMMY_BYTE); + } +} + + +void SD_IO_CSState(uint8_t val) +{ + if(val == 1) + { + SD_CS_HIGH(); + } + else + { + SD_CS_LOW(); + } +} + +/** + * @brief Write a byte on the SD. + * @param DataIn: byte to send. + * @param DataOut: read byte. + * @param DataLength: data length. + * @retval None + */ +void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength) +{ + /* Send the byte */ + SPIx_WriteReadData(DataIn, DataOut, DataLength); +} + +/** + * @brief Writes a byte on the SD. + * @param Data: byte to send. + * @retval None + */ +uint8_t SD_IO_WriteByte(uint8_t Data) +{ + uint8_t tmp; + + /* Send the byte */ + SPIx_WriteReadData(&Data,&tmp,1); + return tmp; +} + +#endif /* HAL_SPI_MODULE_ENABLED */ + +#if defined(HAL_I2C_MODULE_ENABLED) +/********************************* LINK I2C TEMPERATURE SENSOR *****************************/ +/** + * @brief Initializes peripherals used by the I2C Temperature Sensor driver. + * @retval None + */ +void TSENSOR_IO_Init(void) +{ + I2C1_Init(); +} + +/** + * @brief Writes one byte to the TSENSOR. + * @param DevAddress: Target device address + * @param pBuffer: Pointer to data buffer + * @param WriteAddr: TSENSOR's internal address to write to. + * @param Length: Number of data to write + * @retval None + */ +void TSENSOR_IO_Write(uint16_t DevAddress, uint8_t* pBuffer, uint8_t WriteAddr, uint16_t Length) +{ + I2C1_WriteBuffer(DevAddress, WriteAddr, I2C_MEMADD_SIZE_8BIT, pBuffer, Length); +} + +/** + * @brief Reads one byte from the TSENSOR. + * @param DevAddress: Target device address + * @param pBuffer : pointer to the buffer that receives the data read from the TSENSOR. + * @param ReadAddr : TSENSOR's internal address to read from. + * @param Length: Number of data to read + * @retval None + */ +void TSENSOR_IO_Read(uint16_t DevAddress, uint8_t* pBuffer, uint8_t ReadAddr, uint16_t Length) +{ + I2C1_ReadBuffer(DevAddress, ReadAddr, I2C_MEMADD_SIZE_8BIT, pBuffer, Length); +} + +/** + * @brief Checks if Temperature Sensor is ready for communication. + * @param DevAddress: Target device address + * @param Trials: Number of trials + * @retval HAL status + */ +uint16_t TSENSOR_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials) +{ + return (I2C1_IsDeviceReady(DevAddress, Trials)); +} + +/****************************** LINK HDMI CEC *********************************/ +/** + * @brief Initializes CEC low level. + * @retval None + */ +void HDMI_CEC_IO_Init (void) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Enable CEC clock */ + __HAL_RCC_CEC_CLK_ENABLE(); + + /* Enable CEC LINE GPIO clock */ + HDMI_CEC_LINE_CLK_ENABLE(); + + /* Configure CEC LINE GPIO as alternate function open drain */ + GPIO_InitStruct.Pin = HDMI_CEC_LINE_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = HDMI_CEC_LINE_AF; + HAL_GPIO_Init(HDMI_CEC_LINE_GPIO_PORT, &GPIO_InitStruct); + + /* CEC IRQ Channel configuration */ + HAL_NVIC_SetPriority((IRQn_Type)HDMI_CEC_IRQn, 0x3, 0x0); + HAL_NVIC_EnableIRQ((IRQn_Type)HDMI_CEC_IRQn); + + /* Enable CEC HPD SINK GPIO clock */ + HDMI_CEC_HPD_SINK_CLK_ENABLE(); + + /* Configure CEC HPD SINK GPIO as output push pull */ + GPIO_InitStruct.Pin = HDMI_CEC_HPD_SINK_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + HAL_GPIO_Init(HDMI_CEC_HPD_SINK_GPIO_PORT, &GPIO_InitStruct); + + I2C1_Init(); + + /* Enable CEC HPD SOURCE GPIO clock */ + HDMI_CEC_HPD_SOURCE_CLK_ENABLE(); + + /* Configure CEC HPD SOURCE GPIO as output push pull */ + GPIO_InitStruct.Pin = HDMI_CEC_HPD_SOURCE_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + HAL_GPIO_Init(HDMI_CEC_HPD_SOURCE_GPIO_PORT, &GPIO_InitStruct); + + I2C2_Init(); +} + +/** + * @brief Write data to I2C HDMI CEC driver + * @param pBuffer: Pointer to data buffer + * @param BufferSize: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HDMI_CEC_IO_WriteData(uint8_t * pBuffer, uint16_t BufferSize) +{ + return (I2C1_TransmitData(pBuffer, BufferSize)); +} + +/** + * @brief Read data to I2C HDMI CEC driver + * @param DevAddress: Target device address + * @param pBuffer: Pointer to data buffer + * @param BufferSize: Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HDMI_CEC_IO_ReadData(uint16_t DevAddress, uint8_t * pBuffer, uint16_t BufferSize) +{ + return (I2C2_ReceiveData(DevAddress, pBuffer, BufferSize)); +} + +/**************************** LINK USB Type-C MUX *****************************/ +/** + * @brief Initializes peripherals used by the USB Type-C MUX driver. + * @retval 0: success, else failed + */ +uint8_t MUX_IO_Init(void) +{ + uint8_t ret; + ret = (I2C1_Init() == HAL_OK) ? 0 : 1; + return ret; +} + +/** + * @brief Release peripherals used by the USB Type-C MUX driver. + * @retval None + */ +void MUX_IO_DeInit(void) +{ + I2C1_DeInit(); +} + +/** + * @brief Writes a single data. + * @param Addr: I2C address + * @param Reg: Reg address + * @param Data: pointer to the data to be written + * @retval 0: success, else failed + */ +uint8_t MUX_IO_Write(uint16_t Addr, uint16_t Reg, uint8_t Data) +{ + uint8_t ret; + ret = (I2C1_WriteBuffer(Addr, Reg, I2C_MEMADD_SIZE_8BIT, &Data, 1) == HAL_OK) ? 0 : 1; + return ret; +} + +/** + * @brief Reads a single data. + * @param Addr: I2C address + * @param Reg: Reg address + * @param pData: pointer to the data + * @retval 0: success, else failed + */ +uint8_t MUX_IO_Read(uint16_t Addr, uint16_t Reg, uint8_t *pData) +{ + uint8_t ret; + ret = (I2C1_ReadBuffer(Addr, Reg, I2C_MEMADD_SIZE_8BIT, pData, 1) == HAL_OK) ? 0 : 1; + return ret; +} + +/** + * @brief Checks if USB Type-C MUX is ready for communication. + * @param DevAddress: Target device address + * @param Trials: Number of trials + * @retval HAL status + */ +uint32_t MUX_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials) +{ + return (I2C1_IsDeviceReady(DevAddress, Trials)); +} + + +#endif /* HAL_I2C_MODULE_ENABLED */ + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval.h b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval.h new file mode 100644 index 0000000..ca69119 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval.h @@ -0,0 +1,563 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval.h + * @author MCD Application Team + * @brief This file contains definitions for STM32G0C1E-EV's Leds, push-buttons + * and COM port hardware resources. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0C1E_EVAL_H +#define STM32G0C1E_EVAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup BSP + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL STM32G0C1E EVAL + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" +#include + +/** @defgroup STM32G0C1E_EVAL_Common STM32G0C1E EVAL Common + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_Private_Constants Private Constants + * @{ + */ +/** +* @} +*/ + +/** @defgroup STM32G0C1E_EVAL_Private_Variables Private Variables + * @{ + */ +/** +* @} +*/ + +/** @defgroup STM32G0C1E_EVAL_Exported_Types Exported Types + * @{ + */ + +/** + * @brief LED Types Definition + */ +typedef enum +{ + LED1 = 0, + LED2 = 1, + LED3 = 2, + LED4 = 3, + /* Color led aliases */ + LED_GREEN = LED1, + LED_ORANGE = LED2, + LED_RED = LED3, + LED_BLUE = LED4 +} Led_TypeDef; + +/** + * @brief BUTTON Types Definition + */ +typedef enum +{ + BUTTON_TAMPER = 0 +} Button_TypeDef; + +typedef enum +{ + BUTTON_MODE_GPIO = 0, + BUTTON_MODE_EXTI = 1 +} ButtonMode_TypeDef; + +/** + * @brief JOYSTICK Types Definition + */ +typedef enum +{ + JOY_SEL = 0, + JOY_DOWN = 1, + JOY_LEFT = 2, + JOY_RIGHT = 3, + JOY_UP = 4, + JOY_NONE = 5 +} JOYState_TypeDef; + +typedef enum +{ + JOY_MODE_GPIO = 0, + JOY_MODE_EXTI = 1 +} JOYMode_TypeDef; + +/** + * @brief COM Types Definition + */ +typedef enum +{ + COM1 = 0 +} COM_TypeDef; + +/** + * @brief Daughter Board (DB) Types Definition + */ +typedef enum +{ + DB_ID_NONE = 0, + DB_ID_LEGACY, + DB_ID_UCPD_AB, + DB_ID_UCPD_C +} DBId_TypeDef; + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_Exported_Constants Exported Constants + * @{ + */ + +/** + * @brief Define for STM32G0C1E_EVAL board + */ +#define EVAL_BOARD_REVISION ((uint8_t *)"REV. B") + +/** @defgroup STM32G0C1E_EV_LED STM32G0C1E-EV LED + * @{ + */ +#define LEDn 4 + +#define LED1_PIN GPIO_PIN_5 /* PD.05 */ +#define LED1_GPIO_PORT GPIOD +#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() +#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() + +#define LED2_PIN GPIO_PIN_6 /* PD.06 */ +#define LED2_GPIO_PORT GPIOD +#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() +#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() + +#define LED3_PIN GPIO_PIN_8 /* PD.08 */ +#define LED3_GPIO_PORT GPIOD +#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() +#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() + +#define LED4_PIN GPIO_PIN_9 /* PD.09 */ +#define LED4_GPIO_PORT GPIOD +#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() +#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() + +#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if((__LED__) == LED1) LED1_GPIO_CLK_ENABLE(); else \ + if((__LED__) == LED2) LED2_GPIO_CLK_ENABLE(); else \ + if((__LED__) == LED3) LED3_GPIO_CLK_ENABLE(); else \ + if((__LED__) == LED4) LED4_GPIO_CLK_ENABLE();} while(0) + +#define LEDx_GPIO_CLK_DISABLE(__LED__) (((__LED__) == LED1) ? LED1_GPIO_CLK_DISABLE() :\ + ((__LED__) == LED2) ? LED2_GPIO_CLK_DISABLE() :\ + ((__LED__) == LED3) ? LED3_GPIO_CLK_DISABLE() :\ + ((__LED__) == LED4) ? LED4_GPIO_CLK_DISABLE() : 0 ) + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EV_BUTTON STM32G0C1E-EV BUTTON + * @{ + */ +#define JOYn 5 +#define BUTTONn 1 + +/** + * @brief Tamper push-button + */ +#define TAMPER_BUTTON_PIN GPIO_PIN_13 /* PC.13 */ +#define TAMPER_BUTTON_GPIO_PORT GPIOC +#define TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +#define TAMPER_BUTTON_EXTI_IRQn EXTI4_15_IRQn + +#define TAMPERx_GPIO_CLK_ENABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_TAMPER) TAMPER_BUTTON_GPIO_CLK_ENABLE();} while(0) + +#define TAMPERx_GPIO_CLK_DISABLE(__BUTTON__) (((__BUTTON__) == BUTTON_TAMPER) ? TAMPER_BUTTON_GPIO_CLK_DISABLE(): 0 ) + +/** + * @brief Joystick Right push-button + */ +#define RIGHT_JOY_PIN GPIO_PIN_7 /* PC.07 */ +#define RIGHT_JOY_GPIO_PORT GPIOC +#define RIGHT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define RIGHT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +#define RIGHT_JOY_EXTI_IRQn EXTI4_15_IRQn + +/** + * @brief Joystick Left push-button + */ +#define LEFT_JOY_PIN GPIO_PIN_8 /* PC.08 */ +#define LEFT_JOY_EXTI_IRQn EXTI4_15_IRQn +#define LEFT_JOY_GPIO_PORT GPIOC +#define LEFT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define LEFT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +/** + * @brief Joystick Up push-button + */ +#define UP_JOY_PIN GPIO_PIN_2 /* PC.02 */ +#define UP_JOY_GPIO_PORT GPIOC +#define UP_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define UP_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +#define UP_JOY_EXTI_IRQn EXTI2_3_IRQn + +/** + * @brief Joystick Down push-button + */ +#define DOWN_JOY_PIN GPIO_PIN_3 /* PC.03 */ +#define DOWN_JOY_EXTI_IRQn EXTI2_3_IRQn +#define DOWN_JOY_GPIO_PORT GPIOC +#define DOWN_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define DOWN_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() + +/** + * @brief Joystick Sel push-button + */ +#define SEL_JOY_PIN GPIO_PIN_0 /* PA.00 */ +#define SEL_JOY_GPIO_PORT GPIOA +#define SEL_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define SEL_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define SEL_JOY_EXTI_IRQn EXTI0_1_IRQn + +#define JOYx_GPIO_CLK_ENABLE(__JOY__) do { if((__JOY__) == JOY_SEL) SEL_JOY_GPIO_CLK_ENABLE(); else \ + if((__JOY__) == JOY_DOWN) DOWN_JOY_GPIO_CLK_ENABLE(); else \ + if((__JOY__) == JOY_LEFT) LEFT_JOY_GPIO_CLK_ENABLE(); else \ + if((__JOY__) == JOY_RIGHT) RIGHT_JOY_GPIO_CLK_ENABLE(); else \ + if((__JOY__) == JOY_UP) UP_JOY_GPIO_CLK_ENABLE();} while(0) + +#define JOYx_GPIO_CLK_DISABLE(__JOY__) (((__JOY__) == JOY_SEL) ? SEL_JOY_GPIO_CLK_DISABLE() :\ + ((__JOY__) == JOY_DOWN) ? DOWN_JOY_GPIO_CLK_DISABLE() :\ + ((__JOY__) == JOY_LEFT) ? LEFT_JOY_GPIO_CLK_DISABLE() :\ + ((__JOY__) == JOY_RIGHT) ? RIGHT_JOY_GPIO_CLK_DISABLE() :\ + ((__JOY__) == JOY_UP) ? UP_JOY_GPIO_CLK_DISABLE() : 0 ) + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EV_COM STM32G0C1E-EV COM + * @{ + */ +#define COMn 1 + +/** + * @brief Definition for COM port1, connected to USART1 + */ +#define EVAL_COM1 USART1 +#define EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE() +#define EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE() + +#define EVAL_COM1_TX_PIN GPIO_PIN_4 /* PC.04 */ +#define EVAL_COM1_TX_GPIO_PORT GPIOC +#define EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +#define EVAL_COM1_TX_AF GPIO_AF1_USART1 + +#define EVAL_COM1_RX_PIN GPIO_PIN_5 /* PC.05 */ +#define EVAL_COM1_RX_GPIO_PORT GPIOC +#define EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +#define EVAL_COM1_RX_AF GPIO_AF1_USART1 + +#define EVAL_COM1_CTS_PIN GPIO_PIN_11 /* PA.11 */ +#define EVAL_COM1_CTS_GPIO_PORT GPIOA +#define EVAL_COM1_CTS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define EVAL_COM1_CTS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define EVAL_COM1_CTS_AF GPIO_AF1_USART1 + +#define EVAL_COM1_RTS_PIN GPIO_PIN_12 /* PA.12 */ +#define EVAL_COM1_RTS_GPIO_PORT GPIOA +#define EVAL_COM1_RTS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define EVAL_COM1_RTS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define EVAL_COM1_RTS_AF GPIO_AF1_USART1 + +#define EVAL_COM1_IRQn USART1_IRQn + +#define COMx_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0) +#define COMx_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0) + +#define COMx_TX_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0) +#define COMx_TX_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0) + +#define COMx_RX_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0) +#define COMx_RX_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0) + +#define COMx_CTS_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_CTS_GPIO_CLK_ENABLE();} while(0) +#define COMx_CTS_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_CTS_GPIO_CLK_DISABLE() : 0) + +#define COMx_RTS_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_RTS_GPIO_CLK_ENABLE();} while(0) +#define COMx_RTS_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_RTS_GPIO_CLK_DISABLE() : 0) + +#if defined(HAL_I2C_MODULE_ENABLED) +/*##################### I2Cx ###################################*/ +/* User can use this section to tailor I2Cx instance used and associated resources */ +/* Definition for I2C1 Pins */ +#define EVAL_I2C1 I2C1 +#define EVAL_I2C1_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE() +#define EVAL_I2C1_CLK_DISABLE() __HAL_RCC_I2C1_CLK_DISABLE() +#define EVAL_I2C1_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET() +#define EVAL_I2C1_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() + +#define EVAL_I2C1_SCL_PIN GPIO_PIN_6 /* PB.6 */ +#define EVAL_I2C1_SDA_PIN GPIO_PIN_7 /* PB.7 */ + +#define EVAL_I2C1_GPIO_PORT GPIOB /* GPIOB */ +#define EVAL_I2C1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define EVAL_I2C1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() +#define EVAL_I2C1_SCL_SDA_AF GPIO_AF6_I2C1 + +/* Definition for I2C2 Pins */ +#define EVAL_I2C2 I2C2 +#define EVAL_I2C2_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE() +#define EVAL_I2C2_CLK_DISABLE() __HAL_RCC_I2C2_CLK_DISABLE() +#define EVAL_I2C2_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET() +#define EVAL_I2C2_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET() + +#define EVAL_I2C2_SCL_PIN GPIO_PIN_13 /* PB.13 */ +#define EVAL_I2C2_SDA_PIN GPIO_PIN_14 /* PB.14 */ + +#define EVAL_I2C2_GPIO_PORT GPIOB /* GPIOB */ +#define EVAL_I2C2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define EVAL_I2C2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() +#define EVAL_I2C2_AF GPIO_AF6_I2C2 + +/* Definition for I2C2 NVIC */ +#define EVAL_I2C2_IRQn I2C2_IRQn + +/* Maximum Timeout values for flags waiting loops. These timeouts are not based + on accurate values, they just guarantee that the application will not remain + stuck if the I2C communication is corrupted. + You may modify these timeout values depending on CPU frequency and application + conditions (interrupts routines ...). */ +#define EVAL_I2C1_TIMEOUT_MAX 1000 +#define EVAL_I2C2_TIMEOUT_MAX 1000 + +/* I2C TIMING is calculated in case of the I2C Clock source is the SYSCLK = 48 MHz */ +/* Set TIMING to 0x00E0D3FF to reach 100 KHz speed (Rise time = 50ns, Fall time = 10ns) */ +#define I2C2_TIMING 0x00E0D3FF +#define I2C1_TIMING 0x00E0D3FF + +/* MUX 1 - USB Type-C Crossbar Switch I2C address (0b1000100x) */ +#define MUX_1_TYPEC_SWITCH_I2C_ADDRESS 0x88U + +/* MUX 1 - DisplayPort Linear Redriver I2C address (0b1000100x) */ +#define MUX_1_DP_REDRIVER_I2C_ADDRESS 0x88U + +/* MUX 2 - USB Type-C Crossbar Switch I2C address (0b0110000x) */ +#define MUX_2_TYPEC_SWITCH_I2C_ADDRESS 0x60U + +/* MUX 2 - DisplayPort Linear Redriver I2C address (0b0000000x) */ +#define MUX_2_DP_REDRIVER_I2C_ADDRESS 0x00U + +#endif /* HAL_I2C_MODULE_ENABLED */ + +#if defined(HAL_SPI_MODULE_ENABLED) +/** + * @brief Definition for SPI Interface pins (SPI1 used) + */ +#define EVAL_SPIx SPI1 +#define EVAL_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() +#define EVAL_SPIx_CLK_DISABLE() __HAL_RCC_SPI1_CLK_DISABLE() +#define EVAL_SPIx_FORCE_RESET() __HAL_RCC_SPI1_FORCE_RESET() +#define EVAL_SPIx_RELEASE_RESET() __HAL_RCC_SPI1_RELEASE_RESET() + +#define EVAL_SPIx_SCK_PIN GPIO_PIN_3 /* PB.03 */ +#define EVAL_SPIx_SCK_GPIO_PORT GPIOB /* GPIOB */ +#define EVAL_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define EVAL_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() +#define EVAL_SPIx_SCK_AF GPIO_AF0_SPI1 + +#define EVAL_SPIx_MISO_PIN GPIO_PIN_4 /* PB.04 */ +#define EVAL_SPIx_MISO_GPIO_PORT GPIOB /* GPIOB */ +#define EVAL_SPIx_MISO_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define EVAL_SPIx_MISO_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() +#define EVAL_SPIx_MISO_AF GPIO_AF0_SPI1 + +#define EVAL_SPIx_MOSI_PIN GPIO_PIN_7 /* PA.07 */ +#define EVAL_SPIx_MOSI_GPIO_PORT GPIOA /* GPIOA */ +#define EVAL_SPIx_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define EVAL_SPIx_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define EVAL_SPIx_MOSI_AF GPIO_AF0_SPI1 + +#define EVAL_SPIx_MOSI_DIR_PIN GPIO_PIN_12 /* PC.12 */ +#define EVAL_SPIx_MOSI_DIR_GPIO_PORT GPIOC /* GPIOC */ +#define EVAL_SPIx_MOSI_DIR_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define EVAL_SPIx_MOSI_DIR_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() + +/* Maximum Timeout values for flags waiting loops. These timeouts are not based + on accurate values, they just guarantee that the application will not remain + stuck if the SPI communication is corrupted. + You may modify these timeout values depending on CPU frequency and application + conditions (interrupts routines ...). */ +#define EVAL_SPIx_TIMEOUT_MAX 1000 + +#endif /* HAL_SPI_MODULE_ENABLED */ +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_COMPONENT STM32G0C1E_EVAL COMPONENT + * @{ + */ +/*##################### LCD ###################################*/ +/* Chip Select macro definition */ +#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET) +#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET) +/** + * @brief LCD Control pins + */ +#define LCD_NCS_PIN GPIO_PIN_8 /* PB. 08*/ +#define LCD_NCS_GPIO_PORT GPIOB /* GPIOB */ +#define LCD_NCS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define LCD_NCS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() + + +/*##################### SD ###################################*/ +/* Chip Select macro definition */ +#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) +#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) +/** + * @brief SD card Control pin + */ +#define SD_CS_PIN GPIO_PIN_1 /* PD.01 */ +#define SD_CS_GPIO_PORT GPIOD /* GPIOD */ +#define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() +#define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() + +/** + * @brief SD Detect Interface pins + */ +#define SD_DETECT_PIN GPIO_PIN_9 /* PC.09 */ +#define SD_DETECT_GPIO_PORT GPIOC /* GPIOC */ +#define SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +#define SD_DETECT_EXTI_IRQn EXTI4_15_IRQn + + +/*##################### HDMI-CEC ###################################*/ +/** + * @brief I2C HDMI CEC Interface pins + */ +#define HDMI_CEC_HPD_SINK_PIN GPIO_PIN_2 /* PD.02 */ +#define HDMI_CEC_HPD_SINK_GPIO_PORT GPIOD +#define HDMI_CEC_HPD_SINK_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() +#define HDMI_CEC_HPD_SINK_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() + +#define HDMI_CEC_HPD_SOURCE_PIN GPIO_PIN_6 /* PC.06 */ +#define HDMI_CEC_HPD_SOURCE_GPIO_PORT GPIOC +#define HDMI_CEC_HPD_SOURCE_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define HDMI_CEC_HPD_SOURCE_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() + +#define HDMI_CEC_LINE_PIN GPIO_PIN_10 /* PB.10 */ +#define HDMI_CEC_LINE_GPIO_PORT GPIOB +#define HDMI_CEC_LINE_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define HDMI_CEC_LINE_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() +#define HDMI_CEC_LINE_AF GPIO_AF0_CEC +#define HDMI_CEC_IRQn CEC_IRQn + +/* HDMI-CEC hardware I2C address */ +#define HDMI_CEC_I2C_ADDRESS 0xA0 + +/** + * @} + */ + + +/** @defgroup STM32G0C1E_EVAL_DB STM32G0C1E_EVAL DAUGHTER BOARD + * @{ + */ +#if defined(HAL_ADC_MODULE_ENABLED) +/** + * @brief Daughter Board detection pin + */ +#define DB_DETECT_PIN GPIO_PIN_11 /* PB.11 */ +#define DB_DETECT_GPIO_PORT GPIOB /* GPIOB */ +#define DB_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define DB_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() + +#define DB_ADC ADC1 +#define DB_ADC_CLK_ENABLE() __HAL_RCC_ADC_CLK_ENABLE(); +#define DB_ADC_CLK_DISABLE() __HAL_RCC_ADC_CLK_DISABLE(); + +#define DB_ADC_CHANNEL ADC_CHANNEL_15 + +#endif /* HAL_ADC_MODULE_ENABLED*/ + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_Exported_Functions Exported Functions + * @{ + */ +uint32_t BSP_GetVersion(void); +#if defined(_GUI_INTERFACE) +const uint8_t* BSP_GetHWBoardVersionName(void); +const uint8_t* BSP_GetPDTypeName(void); +#endif /* _GUI_INTERFACE */ +void BSP_LED_Init(Led_TypeDef Led); +void BSP_LED_DeInit(Led_TypeDef Led); +void BSP_LED_On(Led_TypeDef Led); +void BSP_LED_Off(Led_TypeDef Led); +void BSP_LED_Toggle(Led_TypeDef Led); +void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); +uint32_t BSP_PB_GetState(Button_TypeDef Button); +uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode); +void BSP_JOY_DeInit(void); +JOYState_TypeDef BSP_JOY_GetState(void); +#if defined(HAL_UART_MODULE_ENABLED) +void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef* huart); +#endif /* HAL_UART_MODULE_ENABLED */ +#if defined(HAL_ADC_MODULE_ENABLED) +uint8_t BSP_DB_GetId(DBId_TypeDef *pDaughterBoardId); +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0C1E_EVAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_lcd.c b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_lcd.c new file mode 100644 index 0000000..4af53a9 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_lcd.c @@ -0,0 +1,896 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_lcd.c + * @author MCD Application Team + * @brief This file includes the driver for Liquid Crystal Display modules + * mounted on STM32G0C1E-EV evaluation board. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** +@verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) This driver is used to drive indirectly an LCD TFT. + (#) This driver supports AM240320LGTNQW00H (HX8347D) LCD mounted on MB895 daughter board + (#) The HX8347D components driver MUST be included with this driver. + + (#) Initialization steps: + (++) Initialize the LCD using the LCD_Init() function. + + (#) Display on LCD + (++) Clear the whole LCD using the LCD_Clear() function or only one specified + string line using the LCD_ClearStringLine() function. + (++) Display a character on the specified line and column using the LCD_DisplayChar() + function or a complete string line using the LCD_DisplayStringAtLine() function. + (++) Display a string line on the specified position (x,y in pixel) and align mode + using the LCD_DisplayStringAtLine() function. + (++) Draw and fill a basic shapes (dot, line, rectangle, circle, ellipse, .. bitmap) + on LCD using a set of functions. + @endverbatim + */ + +/*----------------------------------------------------------------------------*/ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0c1e_eval_lcd.h" +#include "../../../Utilities/Fonts/fonts.h" +#include "../../../Utilities/Fonts/font24.c" +#include "../../../Utilities/Fonts/font20.c" +#include "../../../Utilities/Fonts/font16.c" +#include "../../../Utilities/Fonts/font12.c" +#include "../../../Utilities/Fonts/font8.c" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL_LCD + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_LCD_Private_Constants Private Constants + * @{ + */ +#define POLY_X(Z) ((int32_t)((pPoints + (Z))->X)) +#define POLY_Y(Z) ((int32_t)((pPoints + (Z))->Y)) + +#define MAX_HEIGHT_FONT 17 +#define MAX_WIDTH_FONT 24 +#define OFFSET_BITMAP 54 +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_LCD_Private_Macros Private Macros + * @{ + */ +#define ABS(X) ((X) > 0 ? (X) : -(X)) + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_LCD_Private_Variables Private Variables + * @{ + */ +LCD_DrawPropTypeDef DrawProp; + +static LCD_DrvTypeDef *lcd_drv; + +/* Max size of bitmap will based on a font24 (17x24) */ +static uint8_t bitmap[MAX_HEIGHT_FONT*MAX_WIDTH_FONT*2+OFFSET_BITMAP] = {0}; + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_LCD_Private_Functions Private Functions + * @{ + */ +static void LCD_DrawChar(uint16_t Xpos, uint16_t Ypos, const uint8_t *pChar); +static void LCD_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height); +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_LCD_Exported_Functions + * @{ + */ + +/** + * @brief Initializes the LCD. + * @retval LCD state + */ +uint8_t BSP_LCD_Init(void) +{ + /* Default value for draw propriety */ + DrawProp.BackColor = 0xFFFF; + DrawProp.pFont = &LCD_DEFAULT_FONT; + DrawProp.TextColor = 0x0000; + + /*HX8347D_ID connected*/ + lcd_drv = &hx8347d_drv; + + /* LCD Init */ + lcd_drv->Init(); + + /* Initialize the font */ + BSP_LCD_SetFont(&LCD_DEFAULT_FONT); + + return LCD_OK; +} + +/** + * @brief Gets the LCD X size. + * @retval Used LCD X size + */ +uint32_t BSP_LCD_GetXSize(void) +{ + return(lcd_drv->GetLcdPixelWidth()); +} + +/** + * @brief Gets the LCD Y size. + * @retval Used LCD Y size + */ +uint32_t BSP_LCD_GetYSize(void) +{ + return(lcd_drv->GetLcdPixelHeight()); +} + +/** + * @brief Gets the LCD text color. + * @retval Used text color. + */ +uint16_t BSP_LCD_GetTextColor(void) +{ + return DrawProp.TextColor; +} + +/** + * @brief Gets the LCD background color. + * @retval Used background color + */ +uint16_t BSP_LCD_GetBackColor(void) +{ + return DrawProp.BackColor; +} + +/** + * @brief Sets the LCD text color. + * @param Color: Text color code RGB(5-6-5) + * @retval None + */ +void BSP_LCD_SetTextColor(uint16_t Color) +{ + DrawProp.TextColor = Color; +} + +/** + * @brief Sets the LCD background color. + * @param Color: Background color code RGB(5-6-5) + * @retval None + */ +void BSP_LCD_SetBackColor(uint16_t Color) +{ + DrawProp.BackColor = Color; +} + +/** + * @brief Sets the LCD text font. + * @param pFonts: Font to be used + * @retval None + */ +void BSP_LCD_SetFont(sFONT *pFonts) +{ + DrawProp.pFont = pFonts; +} + +/** + * @brief Gets the LCD text font. + * @retval Used font + */ +sFONT *BSP_LCD_GetFont(void) +{ + return DrawProp.pFont; +} + +/** + * @brief Clears the whole LCD. + * @param Color: Color of the background + * @retval None + */ +void BSP_LCD_Clear(uint16_t Color) +{ + uint32_t counter = 0; + + uint32_t color_backup = DrawProp.TextColor; + DrawProp.TextColor = Color; + + for(counter = 0; counter < BSP_LCD_GetYSize(); counter++) + { + BSP_LCD_DrawHLine(0, counter, BSP_LCD_GetXSize()); + } + + DrawProp.TextColor = color_backup; + BSP_LCD_SetTextColor(DrawProp.TextColor); +} + +/** + * @brief Clears the selected line. + * @param Line: Line to be cleared + * This parameter can be one of the following values: + * @arg 0..9: if the Current fonts is Font16x24 + * @arg 0..19: if the Current fonts is Font12x12 or Font8x12 + * @arg 0..29: if the Current fonts is Font8x8 + * @retval None + */ +void BSP_LCD_ClearStringLine(uint16_t Line) +{ + uint32_t colorbackup = DrawProp.TextColor; + DrawProp.TextColor = DrawProp.BackColor;; + + /* Draw a rectangle with background color */ + BSP_LCD_FillRect(0, (Line * DrawProp.pFont->Height), BSP_LCD_GetXSize(), DrawProp.pFont->Height); + + DrawProp.TextColor = colorbackup; + BSP_LCD_SetTextColor(DrawProp.TextColor); +} + +/** + * @brief Displays one character. + * @param Xpos: Start column address + * @param Ypos: Line where to display the character shape. + * @param Ascii: Character ascii code + * This parameter must be a number between Min_Data = 0x20 and Max_Data = 0x7E + * @retval None + */ +void BSP_LCD_DisplayChar(uint16_t Xpos, uint16_t Ypos, uint8_t Ascii) +{ + LCD_DrawChar(Ypos, Xpos, &DrawProp.pFont->table[(Ascii-' ') *\ + DrawProp.pFont->Height * ((DrawProp.pFont->Width + 7) / 8)]); +} + +/** + * @brief Displays characters on the LCD. + * @param Xpos: X position (in pixel) + * @param Ypos: Y position (in pixel) + * @param pText: Pointer to string to display on LCD + * @param Mode: Display mode + * This parameter can be one of the following values: + * @arg CENTER_MODE + * @arg RIGHT_MODE + * @arg LEFT_MODE + * @retval None + */ +void BSP_LCD_DisplayStringAt(uint16_t Xpos, uint16_t Ypos, uint8_t *pText, Line_ModeTypdef Mode) +{ + uint16_t refcolumn = 1, counter = 0; + uint32_t size = 0, ysize = 0; + uint8_t *ptr = pText; + + /* Get the text size */ + while (*ptr++) size ++ ; + + /* Characters number per line */ + ysize = (BSP_LCD_GetXSize()/DrawProp.pFont->Width); + + switch (Mode) + { + case CENTER_MODE: + { + refcolumn = Xpos + ((ysize - size)* DrawProp.pFont->Width) / 2; + break; + } + case LEFT_MODE: + { + refcolumn = Xpos; + break; + } + case RIGHT_MODE: + { + refcolumn = Xpos + ((ysize - size)*DrawProp.pFont->Width); + break; + } + default: + { + refcolumn = Xpos; + break; + } + } + + /* Send the string character by character on lCD */ + while ((*pText != 0) & (((BSP_LCD_GetXSize() - (counter*DrawProp.pFont->Width)) & 0xFFFF) >= DrawProp.pFont->Width)) + { + /* Display one character on LCD */ + BSP_LCD_DisplayChar(refcolumn, Ypos, *pText); + /* Decrement the column position by 16 */ + refcolumn += DrawProp.pFont->Width; + /* Point on the next character */ + pText++; + counter++; + } +} + +/** + * @brief Displays a character on the LCD. + * @param Line: Line where to display the character shape + * This parameter can be one of the following values: + * @arg 0..9: if the Current fonts is Font16x24 + * @arg 0..19: if the Current fonts is Font12x12 or Font8x12 + * @arg 0..29: if the Current fonts is Font8x8 + * @param pText: Pointer to string to display on LCD + * @retval None + */ +void BSP_LCD_DisplayStringAtLine(uint16_t Line, uint8_t *pText) +{ + BSP_LCD_DisplayStringAt(0, LINE(Line),pText, LEFT_MODE); +} + +/** + * @brief Reads an LCD pixel. + * @param Xpos: X position + * @param Ypos: Y position + * @retval RGB pixel color + */ +uint16_t BSP_LCD_ReadPixel(uint16_t Xpos, uint16_t Ypos) +{ + uint16_t ret = 0; + + if(lcd_drv->ReadPixel != NULL) + { + ret = lcd_drv->ReadPixel(Xpos, Ypos); + } + + return ret; +} + +/** + * @brief Draws an horizontal line. + * @param Xpos: X position + * @param Ypos: Y position + * @param Length: Line length + * @retval None + */ +void BSP_LCD_DrawHLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length) +{ + uint32_t index = 0; + + if(lcd_drv->DrawHLine != NULL) + { + lcd_drv->DrawHLine(DrawProp.TextColor, Ypos, Xpos, Length); + } + else + { + for(index = 0; index < Length; index++) + { + BSP_LCD_DrawPixel((Ypos + index), Xpos, DrawProp.TextColor); + } + } +} + +/** + * @brief Draws a vertical line. + * @param Xpos: X position + * @param Ypos: Y position + * @param Length: Line length + * @retval None + */ +void BSP_LCD_DrawVLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length) +{ + uint32_t index = 0; + + if(lcd_drv->DrawVLine != NULL) + { + LCD_SetDisplayWindow(Ypos, Xpos, 1, Length); + lcd_drv->DrawVLine(DrawProp.TextColor, Ypos, Xpos, Length); + LCD_SetDisplayWindow(0, 0, BSP_LCD_GetXSize(), BSP_LCD_GetYSize()); + } + else + { + for(index = 0; index < Length; index++) + { + BSP_LCD_DrawPixel(Ypos, Xpos + index, DrawProp.TextColor); + } + } +} + +/** + * @brief Draws an uni-line (between two points). + * @param X1: Point 1 X position + * @param Y1: Point 1 Y position + * @param X2: Point 2 X position + * @param Y2: Point 2 Y position + * @retval None + */ +void BSP_LCD_DrawLine(uint16_t X1, uint16_t Y1, uint16_t X2, uint16_t Y2) +{ + int16_t deltax = 0, deltay = 0, x = 0, y = 0, xinc1 = 0, xinc2 = 0, + yinc1 = 0, yinc2 = 0, den = 0, num = 0, numadd = 0, numpixels = 0, + curpixel = 0; + + deltax = ABS(Y2 - Y1); /* The difference between the x's */ + deltay = ABS(X2 - X1); /* The difference between the y's */ + x = Y1; /* Start x off at the first pixel */ + y = X1; /* Start y off at the first pixel */ + + if (Y2 >= Y1) /* The x-values are increasing */ + { + xinc1 = 1; + xinc2 = 1; + } + else /* The x-values are decreasing */ + { + xinc1 = -1; + xinc2 = -1; + } + + if (X2 >= X1) /* The y-values are increasing */ + { + yinc1 = 1; + yinc2 = 1; + } + else /* The y-values are decreasing */ + { + yinc1 = -1; + yinc2 = -1; + } + + if (deltax >= deltay) /* There is at least one x-value for every y-value */ + { + xinc1 = 0; /* Don't change the x when numerator >= denominator */ + yinc2 = 0; /* Don't change the y for every iteration */ + den = deltax; + num = deltax / 2; + numadd = deltay; + numpixels = deltax; /* There are more x-values than y-values */ + } + else /* There is at least one y-value for every x-value */ + { + xinc2 = 0; /* Don't change the x for every iteration */ + yinc1 = 0; /* Don't change the y when numerator >= denominator */ + den = deltay; + num = deltay / 2; + numadd = deltax; + numpixels = deltay; /* There are more y-values than x-values */ + } + + for (curpixel = 0; curpixel <= numpixels; curpixel++) + { + BSP_LCD_DrawPixel(x, y, DrawProp.TextColor); /* Draw the current pixel */ + num += numadd; /* Increase the numerator by the top of the fraction */ + if (num >= den) /* Check if numerator >= denominator */ + { + num -= den; /* Calculate the new numerator value */ + x += xinc1; /* Change the x as appropriate */ + y += yinc1; /* Change the y as appropriate */ + } + x += xinc2; /* Change the x as appropriate */ + y += yinc2; /* Change the y as appropriate */ + } +} + +/** + * @brief Draws a rectangle. + * @param Xpos: X position + * @param Ypos: Y position + * @param Width: Rectangle width + * @param Height: Rectangle height + * @retval None + */ +void BSP_LCD_DrawRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height) +{ + /* Draw horizontal lines */ + BSP_LCD_DrawHLine(Xpos, Ypos, Width); + BSP_LCD_DrawHLine(Xpos, (Ypos+ Height), Width); + + /* Draw vertical lines */ + BSP_LCD_DrawVLine(Xpos, Ypos, Height); + BSP_LCD_DrawVLine((Xpos + Width), Ypos, Height); +} + +/** + * @brief Draws a circle. + * @param Xpos: X position + * @param Ypos: Y position + * @param Radius: Circle radius + * @retval None + */ +void BSP_LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius) +{ + int32_t decision; /* Decision Variable */ + uint32_t curx; /* Current X Value */ + uint32_t cury; /* Current Y Value */ + + decision = 3 - (Radius << 1); + curx = 0; + cury = Radius; + + while (curx <= cury) + { + BSP_LCD_DrawPixel((Ypos + curx), (Xpos - cury), DrawProp.TextColor); + + BSP_LCD_DrawPixel((Ypos - curx), (Xpos - cury), DrawProp.TextColor); + + BSP_LCD_DrawPixel((Ypos + cury), (Xpos - curx), DrawProp.TextColor); + + BSP_LCD_DrawPixel((Ypos - cury), (Xpos - curx), DrawProp.TextColor); + + BSP_LCD_DrawPixel((Ypos + curx), (Xpos + cury), DrawProp.TextColor); + + BSP_LCD_DrawPixel((Ypos - curx), (Xpos + cury), DrawProp.TextColor); + + BSP_LCD_DrawPixel((Ypos + cury), (Xpos + curx), DrawProp.TextColor); + + BSP_LCD_DrawPixel((Ypos - cury), (Xpos + curx), DrawProp.TextColor); + + /* Initialize the font */ + BSP_LCD_SetFont(&LCD_DEFAULT_FONT); + + if (decision < 0) + { + decision += (curx << 2) + 6; + } + else + { + decision += ((curx - cury) << 2) + 10; + cury--; + } + curx++; + } +} + +/** + * @brief Draws an poly-line (between many points). + * @param pPoints: Pointer to the points array + * @param PointCount: Number of points + * @retval None + */ +void BSP_LCD_DrawPolygon(pPoint pPoints, uint16_t PointCount) +{ + int16_t x = 0, y = 0; + + if(PointCount < 2) + { + return; + } + + BSP_LCD_DrawLine(pPoints->X, pPoints->Y, (pPoints+PointCount-1)->X, (pPoints+PointCount-1)->Y); + + while(--PointCount) + { + x = pPoints->X; + y = pPoints->Y; + pPoints++; + BSP_LCD_DrawLine(x, y, pPoints->X, pPoints->Y); + } + +} + +/** + * @brief Draws an ellipse on LCD. + * @param Xpos: X position + * @param Ypos: Y position + * @param XRadius: Ellipse X radius + * @param YRadius: Ellipse Y radius + * @retval None + */ +void BSP_LCD_DrawEllipse(int Xpos, int Ypos, int XRadius, int YRadius) +{ + int x = 0, y = -XRadius, err = 2-2*YRadius, e2; + float k = 0, rad1 = 0, rad2 = 0; + + rad1 = YRadius; + rad2 = XRadius; + + k = (float)(rad2/rad1); + + do { + BSP_LCD_DrawPixel((Ypos-(uint16_t)(x/k)), (Xpos+y), DrawProp.TextColor); + BSP_LCD_DrawPixel((Ypos+(uint16_t)(x/k)), (Xpos+y), DrawProp.TextColor); + BSP_LCD_DrawPixel((Ypos+(uint16_t)(x/k)), (Xpos-y), DrawProp.TextColor); + BSP_LCD_DrawPixel((Ypos-(uint16_t)(x/k)), (Xpos-y), DrawProp.TextColor); + + e2 = err; + if (e2 <= x) { + err += ++x*2+1; + if (-y == x && e2 <= y) e2 = 0; + } + if (e2 > y) err += ++y*2+1; + } + while (y <= 0); +} + +/** + * @brief Draws a bitmap picture loaded in the internal Flash (32 bpp). + * @param Xpos: Bmp X position in the LCD + * @param Ypos: Bmp Y position in the LCD + * @param pBmp: Pointer to Bmp picture address in the internal Flash + * @retval None + */ +void BSP_LCD_DrawBitmap(uint16_t Xpos, uint16_t Ypos, uint8_t *pBmp) +{ + uint32_t height = 0, width = 0; + + /* Read bitmap width */ + width = pBmp[18] + (pBmp[19] << 8) + (pBmp[20] << 16) + (pBmp[21] << 24); + + /* Read bitmap height */ + height = pBmp[22] + (pBmp[23] << 8) + (pBmp[24] << 16) + (pBmp[25] << 24); + + /* Remap Ypos, hx8347d works with inverted X in case of bitmap */ + /* X = 0, cursor is on Bottom corner */ + if(lcd_drv == &hx8347d_drv) + { + Ypos = BSP_LCD_GetYSize() - Ypos - height; + } + + LCD_SetDisplayWindow(Ypos, Xpos, width, height); + + if(lcd_drv->DrawBitmap != NULL) + { + lcd_drv->DrawBitmap(Ypos, Xpos, pBmp); + } + LCD_SetDisplayWindow(0, 0, BSP_LCD_GetXSize(), BSP_LCD_GetYSize()); +} + +/** + * @brief Draws a full rectangle. + * @param Xpos: X position + * @param Ypos: Y position + * @param Width: Rectangle width + * @param Height: Rectangle height + * @retval None + */ +void BSP_LCD_FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height) +{ + BSP_LCD_SetTextColor(DrawProp.TextColor); + do + { + BSP_LCD_DrawHLine(Xpos, Ypos++, Width); + } + while(Height--); +} + +/** + * @brief Draws a full circle. + * @param Xpos: X position + * @param Ypos: Y position + * @param Radius: Circle radius + * @retval None + */ +void BSP_LCD_FillCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius) +{ + int32_t decision; /* Decision Variable */ + uint32_t curx; /* Current X Value */ + uint32_t cury; /* Current Y Value */ + + decision = 3 - (Radius << 1); + + curx = 0; + cury = Radius; + + BSP_LCD_SetTextColor(DrawProp.TextColor); + + while (curx <= cury) + { + if(cury > 0) + { + BSP_LCD_DrawVLine(Xpos + curx, Ypos - cury, 2*cury); + BSP_LCD_DrawVLine(Xpos - curx, Ypos - cury, 2*cury); + } + + if(curx > 0) + { + BSP_LCD_DrawVLine(Xpos - cury, Ypos - curx, 2*curx); + BSP_LCD_DrawVLine(Xpos + cury, Ypos - curx, 2*curx); + } + if (decision < 0) + { + decision += (curx << 2) + 6; + } + else + { + decision += ((curx - cury) << 2) + 10; + cury--; + } + curx++; + } + + BSP_LCD_SetTextColor(DrawProp.TextColor); + BSP_LCD_DrawCircle(Xpos, Ypos, Radius); +} + +/** + * @brief Draws a full ellipse. + * @param Xpos: X position + * @param Ypos: Y position + * @param XRadius: Ellipse X radius + * @param YRadius: Ellipse Y radius + * @retval None + */ +void BSP_LCD_FillEllipse(int Xpos, int Ypos, int XRadius, int YRadius) +{ + int x = 0, y = -XRadius, err = 2-2*YRadius, e2; + float k = 0, rad1 = 0, rad2 = 0; + + rad1 = YRadius; + rad2 = XRadius; + + k = (float)(rad2/rad1); + + do + { + BSP_LCD_DrawVLine((Xpos+y), (Ypos-(uint16_t)(x/k)), (2*(uint16_t)(x/k) + 1)); + BSP_LCD_DrawVLine((Xpos-y), (Ypos-(uint16_t)(x/k)), (2*(uint16_t)(x/k) + 1)); + + e2 = err; + if (e2 <= x) + { + err += ++x*2+1; + if (-y == x && e2 <= y) e2 = 0; + } + if (e2 > y) err += ++y*2+1; + } + while (y <= 0); +} + +/** + * @brief Enables the display. + * @retval None + */ +void BSP_LCD_DisplayOn(void) +{ + lcd_drv->DisplayOn(); +} + +/** + * @brief Disables the display. + * @retval None + */ +void BSP_LCD_DisplayOff(void) +{ + lcd_drv->DisplayOff(); +} + +/** + * @brief Draws a pixel on LCD. + * @param Xpos: X position + * @param Ypos: Y position + * @param RGBCode: Pixel color in RGB mode (5-6-5) + * @retval None + */ +void BSP_LCD_DrawPixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGBCode) +{ + if(lcd_drv->WritePixel != NULL) + { + lcd_drv->WritePixel(Xpos, Ypos, RGBCode); + } +} +/** + * @} + */ + +/****************************************************************************** + Static Function +*******************************************************************************/ +/** @addtogroup STM32G0C1E_EVAL_LCD_Private_Functions + * @{ + */ + +/** + * @brief Draws a character on LCD. + * @param Xpos: Line where to display the character shape + * @param Ypos: Start column address + * @param pChar: Pointer to the character data + * @retval None + */ +static void LCD_DrawChar(uint16_t Xpos, uint16_t Ypos, const uint8_t *pChar) +{ + uint32_t counterh = 0, counterw = 0, index = 0; + uint16_t height = 0, width = 0; + uint8_t offset = 0; + uint8_t *pchar = NULL; + uint32_t line = 0; + + height = DrawProp.pFont->Height; + width = DrawProp.pFont->Width; + + /* Fill bitmap header*/ + *(uint16_t *) (bitmap + 2) = (uint16_t)(height*width*2+OFFSET_BITMAP); + *(uint16_t *) (bitmap + 4) = (uint16_t)((height*width*2+OFFSET_BITMAP)>>16); + *(uint16_t *) (bitmap + 10) = OFFSET_BITMAP; + *(uint16_t *) (bitmap + 18) = (uint16_t)(width); + *(uint16_t *) (bitmap + 20) = (uint16_t)((width)>>16); + *(uint16_t *) (bitmap + 22) = (uint16_t)(height); + *(uint16_t *) (bitmap + 24) = (uint16_t)((height)>>16); + + offset = 8 *((width + 7)/8) - width ; + + for(counterh = 0; counterh < height; counterh++) + { + pchar = ((uint8_t *)pChar + (width + 7)/8 * counterh); + + if(((width + 7)/8) == 3) + { + line = (pchar[0]<< 16) | (pchar[1]<< 8) | pchar[2]; + } + + if(((width + 7)/8) == 2) + { + line = (pchar[0]<< 8) | pchar[1]; + } + + if(((width + 7)/8) == 1) + { + line = pchar[0]; + } + + for (counterw = 0; counterw < width; counterw++) + { + /* Image in the bitmap is written from the bottom to the top */ + /* Need to invert image in the bitmap */ + index = (((height-counterh-1)*width)+(counterw))*2+OFFSET_BITMAP; + if(line & (1 << (width- counterw + offset- 1))) + { + bitmap[index] = (uint8_t)DrawProp.TextColor; + bitmap[index+1] = (uint8_t)(DrawProp.TextColor >> 8); + } + else + { + bitmap[index] = (uint8_t)DrawProp.BackColor; + bitmap[index+1] = (uint8_t)(DrawProp.BackColor >> 8); + } + } + } + + BSP_LCD_DrawBitmap(Ypos, Xpos, bitmap); +} + +/** + * @brief Sets display window. + * @param Xpos: LCD X position + * @param Ypos: LCD Y position + * @param Width: LCD window width + * @param Height: LCD window height + * @retval None + */ +static void LCD_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height) +{ + if(lcd_drv->SetDisplayWindow != NULL) + { + lcd_drv->SetDisplayWindow(Xpos, Ypos, Width, Height); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_lcd.h b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_lcd.h new file mode 100644 index 0000000..3b10409 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_lcd.h @@ -0,0 +1,208 @@ +/** + ****************************************************************************** + * @file STM32G0C1E_EVAL_lcd.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * STM32G0C1E_EVAL_lcd.c driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0C1E_EVAL_LCD_H +#define STM32G0C1E_EVAL_LCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0c1e_eval.h" +/* Include LCD component Driver */ +#include "../Components/hx8347d/hx8347d.h" +#include "../../../Utilities/Fonts/fonts.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_LCD STM32G0C1E_EVAL LCD + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_LCD_Exported_Types Exported Types + * @{ + */ +typedef struct +{ + uint32_t TextColor; + uint32_t BackColor; + sFONT *pFont; + +} LCD_DrawPropTypeDef; +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_LCD_Exported_Constants Exported Constants + * @{ + */ +/** + * @brief LCD status structure definition + */ +#define LCD_OK 0x00 +#define LCD_ERROR 0x01 +#define LCD_TIMEOUT 0x02 + +typedef struct +{ + int16_t X; + int16_t Y; + +} Point, * pPoint; + +/** + * @brief Line mode structures definition + */ +typedef enum +{ + CENTER_MODE = 0x01, /*!< Center mode */ + RIGHT_MODE = 0x02, /*!< Right mode */ + LEFT_MODE = 0x03, /*!< Left mode */ + NO_MODE + +} Line_ModeTypdef; + +/** + * @brief LCD color + */ +#define LCD_COLOR_BLUE 0x001F +#define LCD_COLOR_GREEN 0x07E0 +#define LCD_COLOR_RED 0xF800 +#define LCD_COLOR_CYAN 0x07FF +#define LCD_COLOR_MAGENTA 0xF81F +#define LCD_COLOR_YELLOW 0xFFE0 +#define LCD_COLOR_LIGHTBLUE 0x841F +#define LCD_COLOR_LIGHTGREEN 0x87F0 +#define LCD_COLOR_LIGHTRED 0xFC10 +#define LCD_COLOR_LIGHTCYAN 0x87FF +#define LCD_COLOR_LIGHTMAGENTA 0xFC1F +#define LCD_COLOR_LIGHTYELLOW 0xFFF0 +#define LCD_COLOR_DARKBLUE 0x0010 +#define LCD_COLOR_DARKGREEN 0x0400 +#define LCD_COLOR_DARKRED 0x8000 +#define LCD_COLOR_DARKCYAN 0x0410 +#define LCD_COLOR_DARKMAGENTA 0x8010 +#define LCD_COLOR_DARKYELLOW 0x8400 +#define LCD_COLOR_WHITE 0xFFFF +#define LCD_COLOR_LIGHTGRAY 0xD69A +#define LCD_COLOR_GRAY 0x8410 +#define LCD_COLOR_DARKGRAY 0x4208 +#define LCD_COLOR_BLACK 0x0000 +#define LCD_COLOR_BROWN 0xA145 +#define LCD_COLOR_ORANGE 0xFD20 + +/* Macro to convert ST COLOR in RGB 24BIT definition to 16BIT RGB (R5bit,G6bit,B5bit) */ +#define LCD_R(__R_COLOR__) (((__R_COLOR__>>3)&0x1F)<<11) +#define LCD_G(__G_COLOR__) (((__G_COLOR__>>2)&0x3F)<<5) +#define LCD_B(__B_COLOR__) ((__B_COLOR__>>3)&0x1F) + +/* Definition of Official ST COLOR */ +#define LCD_COLOR_ST_BLUE_DARK (LCD_R(0x00)|LCD_G(0x20)|LCD_B(0x52)) +#define LCD_COLOR_ST_BLUE (LCD_R(0x39)|LCD_G(0xA9)|LCD_B(0xDC)) +#define LCD_COLOR_ST_BLUE_LIGHT (LCD_R(0xD1)|LCD_G(0xE4)|LCD_B(0xF3)) +#define LCD_COLOR_ST_GREEN_LIGHT (LCD_R(0xBB)|LCD_G(0xCC)|LCD_B(0x01)) +#define LCD_COLOR_ST_GREEN_DARK (LCD_R(0x00)|LCD_G(0x3D)|LCD_B(0x14)) +#define LCD_COLOR_ST_YELLOW (LCD_R(0xFF)|LCD_G(0xD3)|LCD_B(0x00)) +#define LCD_COLOR_ST_BROWN (LCD_R(0x5C)|LCD_G(0x09)|LCD_B(0x15)) +#define LCD_COLOR_ST_PINK (LCD_R(0xD4)|LCD_G(0x00)|LCD_B(0x7A)) +#define LCD_COLOR_ST_PURPLE (LCD_R(0x59)|LCD_G(0x0D)|LCD_B(0x58)) +#define LCD_COLOR_ST_GRAY_DARK (LCD_R(0x4F)|LCD_G(0x52)|LCD_B(0x51)) +#define LCD_COLOR_ST_GRAY (LCD_R(0x90)|LCD_G(0x98)|LCD_B(0x9E)) +#define LCD_COLOR_ST_GRAY_LIGHT (LCD_R(0xB9)|LCD_G(0xC4)|LCD_B(0xCA)) + +/** + * @brief LCD default font + */ +#ifndef LCD_DEFAULT_FONT +#define LCD_DEFAULT_FONT Font8 +#endif + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_LCD_Exported_Functions Exported Functions + * @{ + */ +uint8_t BSP_LCD_Init(void); +uint32_t BSP_LCD_GetXSize(void); +uint32_t BSP_LCD_GetYSize(void); + +uint16_t BSP_LCD_GetTextColor(void); +uint16_t BSP_LCD_GetBackColor(void); +void BSP_LCD_SetTextColor(__IO uint16_t Color); +void BSP_LCD_SetBackColor(__IO uint16_t Color); +void BSP_LCD_SetFont(sFONT *pFonts); +sFONT *BSP_LCD_GetFont(void); + +void BSP_LCD_Clear(uint16_t Color); +void BSP_LCD_ClearStringLine(uint16_t Line); +void BSP_LCD_DisplayStringAtLine(uint16_t Line, uint8_t *pText); +void BSP_LCD_DisplayStringAt(uint16_t Xpos, uint16_t Ypos, uint8_t *pText, Line_ModeTypdef Mode); +void BSP_LCD_DisplayChar(uint16_t Xpos, uint16_t Ypos, uint8_t Ascii); +void BSP_LCD_DrawPixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGBCode); + +uint16_t BSP_LCD_ReadPixel(uint16_t Xpos, uint16_t Ypos); +void BSP_LCD_DrawHLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length); +void BSP_LCD_DrawVLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length); +void BSP_LCD_DrawLine(uint16_t X1, uint16_t Y1, uint16_t X2, uint16_t Y2); +void BSP_LCD_DrawRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height); +void BSP_LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius); +void BSP_LCD_DrawPolygon(pPoint pPoints, uint16_t PointCount); +void BSP_LCD_DrawEllipse(int Xpos, int Ypos, int XRadius, int YRadius); +void BSP_LCD_DrawBitmap(uint16_t Xpos, uint16_t Ypos, uint8_t *pBmp); + +void BSP_LCD_FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height); +void BSP_LCD_FillCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius); +void BSP_LCD_FillEllipse(int Xpos, int Ypos, int XRadius, int YRadius); + +void BSP_LCD_DisplayOff(void); +void BSP_LCD_DisplayOn(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0C1E_EVAL_LCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_mux.c b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_mux.c new file mode 100644 index 0000000..eb87c7b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_mux.c @@ -0,0 +1,936 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_mux.c + * @author MCD Application Team + * @brief This file provides a set of functions needed to manage the Type-C + * MUX associated to a Type-C receptacle. These functions allow for + * reconfiguring the pins of the Type-C receptacle when the related + * Type-C port operate in DisplayPort alternate mode or + * when it is used as a USB 3.1 to USB Type-C adapter. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include +#include "stm32g0c1e_eval.h" +#include "stm32g0c1e_eval_mux.h" +#include "stm32g0xx_hal.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL_MUX + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Private_Typedef Private Typedef + * @{ + */ +typedef enum { + MUX_NOT_INITIALIZED = 0, + MUX_INITIALIZED +} MUX_StateTypedef; + +typedef struct { + MUX_StateTypedef State; + TYPECSWITCH_Drv_t * TypeCSwitch_Drv; + uint16_t I2C_Address_TypeCSwitch; + DPREDRIVER_Drv_t * DPRedriver_Drv; + uint16_t I2C_Address_DPRedriver; +} MuxInfoTypeDef; + +typedef struct { +#if defined(TUSB546_DEBUG) + TUSB546_RegistersTypeDef TUSB546_Registers; +#endif /* TUSB546_DEBUG */ +#if defined(CBTL08GP053_DEBUG) + CBTL08GP053_RegistersTypeDef CBTL08GP053_Registers; +#endif /* CBTL08GP053_DEBUG */ +#if defined(SN65DP141_DEBUG) + SN65DP141_RegistersTypeDef SN65DP141_Registers; +#endif /* CBTL08GP053_DEBUG */ + MUX_HPDCallbackFuncTypeDef * pfnHPDCallbackFunc; + MUX_HPDStateTypeDef HPDState; + MuxInfoTypeDef MuxInfo[TYPE_C_MUX_NB]; +} ContextTypeDef; + +typedef enum +{ + DET_HPD_SOURCE = 0 +} DetectId_TypeDef; + +typedef enum +{ + SEL_HPDIN = 0 +} SelectId_TypeDef; + +typedef enum { + DET_STATE_LOW = 0, + DET_STATE_HIGH +} MUX_DETState_TypeDef; + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Private_Macros Private Macros + * @{ + */ +#define DETx_GPIO_CLK_ENABLE(__DET__) do { if((__DET__) == DET_HPD_SOURCE) DET_HPD_SOURCE_GPIO_CLK_ENABLE();} while(0) + +#define SELx_GPIO_CLK_ENABLE(__SEL__) do { if((__SEL__) == SEL_HPDIN) SEL_HPDIN_GPIO_CLK_ENABLE();} while(0) +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Private_Variables Private Variables + * @{ + */ +static const TYPECSWITCH_Mode_t ModeSelect[2][13] = +{ + /* PLUG_ORIENTATION_NORMAL */ + { + DFP_D_PIN_ASSIGNMENT_A_NORMAL, /* DFP_PIN_ASSIGNMMENT_A */ + DFP_D_PIN_ASSIGNMENT_B_NORMAL, /* DFP_PIN_ASSIGNMMENT_B */ + DFP_D_PIN_ASSIGNMENT_C_NORMAL, /* DFP_PIN_ASSIGNMMENT_C */ + DFP_D_PIN_ASSIGNMENT_D_NORMAL, /* DFP_PIN_ASSIGNMMENT_D */ + DFP_D_PIN_ASSIGNMENT_E_NORMAL, /* DFP_PIN_ASSIGNMMENT_E */ + DFP_D_PIN_ASSIGNMENT_F_NORMAL, /* DFP_PIN_ASSIGNMMENT_F */ + UFP_D_PIN_ASSIGNMENT_A_NORMAL, /* UFP_PIN_ASSIGNMMENT_A */ + UFP_D_PIN_ASSIGNMENT_B_NORMAL, /* UFP_PIN_ASSIGNMMENT_B */ + UFP_D_PIN_ASSIGNMENT_C_NORMAL, /* UFP_PIN_ASSIGNMMENT_C */ + UFP_D_PIN_ASSIGNMENT_D_NORMAL, /* UFP_PIN_ASSIGNMMENT_D */ + UFP_D_PIN_ASSIGNMENT_E_NORMAL, /* UFP_PIN_ASSIGNMMENT_E */ + UFP_D_PIN_ASSIGNMENT_F_NORMAL, /* UFP_PIN_ASSIGNMMENT_F */ + USB_NORMAL /* USB_ONLY_PIN_ASSIGNMMENT */ + }, + + /* PLUG_ORIENTATION_FLIPPED */ + { + + DFP_D_PIN_ASSIGNMENT_A_FLIPPED, /* DFP_PIN_ASSIGNMMENT_A */ + DFP_D_PIN_ASSIGNMENT_B_FLIPPED, /* DFP_PIN_ASSIGNMMENT_B */ + DFP_D_PIN_ASSIGNMENT_C_FLIPPED, /* DFP_PIN_ASSIGNMMENT_C */ + DFP_D_PIN_ASSIGNMENT_D_FLIPPED, /* DFP_PIN_ASSIGNMMENT_D */ + DFP_D_PIN_ASSIGNMENT_E_FLIPPED, /* DFP_PIN_ASSIGNMMENT_E */ + DFP_D_PIN_ASSIGNMENT_F_FLIPPED, /* DFP_PIN_ASSIGNMMENT_F */ + UFP_D_PIN_ASSIGNMENT_A_FLIPPED, /* UFP_PIN_ASSIGNMMENT_A */ + UFP_D_PIN_ASSIGNMENT_B_FLIPPED, /* UFP_PIN_ASSIGNMMENT_B */ + UFP_D_PIN_ASSIGNMENT_C_FLIPPED, /* UFP_PIN_ASSIGNMMENT_C */ + UFP_D_PIN_ASSIGNMENT_D_FLIPPED, /* UFP_PIN_ASSIGNMMENT_D */ + UFP_D_PIN_ASSIGNMENT_E_FLIPPED, /* UFP_PIN_ASSIGNMMENT_E */ + UFP_D_PIN_ASSIGNMENT_F_FLIPPED, /* UFP_PIN_ASSIGNMMENT_F */ + USB_FLIPPED /* USB_ONLY_PIN_ASSIGNMMENT */ + } +}; + +/** +* @brief SEL variables +*/ +static GPIO_TypeDef* SEL_PORT[SELn] = { + SEL_HPDIN_GPIO_PORT, +}; + +static uint16_t SEL_PIN[SELn] = { + SEL_HPDIN_PIN, +}; + +/* BSP PWR contextual data */ +static ContextTypeDef Context = +{ + .HPDState = HPD_STATE_LOW, + .pfnHPDCallbackFunc = (MUX_HPDCallbackFuncTypeDef *)NULL, + .MuxInfo = + { + /* TYPE_C_MUX_1 */ + { + .State = MUX_NOT_INITIALIZED, + .TypeCSwitch_Drv = &tusb546_drv_CrossSwitch, + .I2C_Address_TypeCSwitch = MUX_1_TYPEC_SWITCH_I2C_ADDRESS, + .DPRedriver_Drv = &tusb546_drv_LinearRedriver, + .I2C_Address_DPRedriver = MUX_1_DP_REDRIVER_I2C_ADDRESS + }, + /* TYPE_C_MUX_2 */ + { + .State = MUX_NOT_INITIALIZED, + .TypeCSwitch_Drv = &cbtl08gp053_drv, + .I2C_Address_TypeCSwitch = MUX_2_TYPEC_SWITCH_I2C_ADDRESS, + .DPRedriver_Drv = &sn65dp141_drv, + .I2C_Address_DPRedriver = MUX_2_DP_REDRIVER_I2C_ADDRESS + } + } +}; + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Private_Functions Private Functions + * @{ + */ +static void MUX_DET_Init(void); +static void MUX_DET_DeInit(void); +static MUX_DETState_TypeDef MUX_DET_GetState(void); +static void MUX_SEL_Init(SelectId_TypeDef Sel); +static void MUX_SEL_DeInit(SelectId_TypeDef Sel); +static void MUX_SEL_On(SelectId_TypeDef Sel); +static void MUX_SEL_Off(SelectId_TypeDef Sel); +static void MUX_DebounceTimerSetConfig(uint32_t DebounceTime); +static void MUX_DebounceTimerResetConfig(void); +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Exported_Variables Exported Variables + * @{ + */ +TIM_HandleTypeDef htim = {.Instance = DEBOUNCE_TIM_INSTANCE}; +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_MUX_Exported_Functions + * @{ + */ + +/** + * @brief Initialize the hardware resources used by the Type-C MUX + * assigned to a given Type-C MUX. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_Init(MUX_TypeCMuxIdTypeDef TypeCMuxId) +{ + uint32_t ret = 0; + + if (Context.MuxInfo[TypeCMuxId].State == MUX_NOT_INITIALIZED) + { + switch (TypeCMuxId) + { + case TYPE_C_MUX_1: + case TYPE_C_MUX_2: + /* USB Type-C Crossbar Switch initialization */ + ret += Context.MuxInfo[TypeCMuxId].TypeCSwitch_Drv->Init(Context.MuxInfo[TypeCMuxId].I2C_Address_TypeCSwitch); + + /* DisplayPort Linear Redriver initialization */ + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->Init(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver); + + if (TypeCMuxId == TYPE_C_MUX_1) + { + MUX_SEL_Init(SEL_HPDIN); + } + else + { + /* DET_HPD_SOURCE */ + MUX_DET_Init(); + } + + /* Initialize the debounce timer (if not done already) */ + if ((Context.MuxInfo[TYPE_C_MUX_1].State == MUX_NOT_INITIALIZED) && + (Context.MuxInfo[TYPE_C_MUX_2].State == MUX_NOT_INITIALIZED)) + { + MUX_DebounceTimerSetConfig(DEBOUNCE_TIME); + } + + /* Update Context */ + Context.MuxInfo[TypeCMuxId].State = MUX_INITIALIZED; + + break; + + default: + ret++; + break; + } + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Free the hardware resources used by the Type-C MUX + * assigned to a given Type-C MUX. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_DeInit(MUX_TypeCMuxIdTypeDef TypeCMuxId) +{ + uint32_t ret = 0; + + if (Context.MuxInfo[TypeCMuxId].State == MUX_INITIALIZED) + { + switch (TypeCMuxId) + { + case TYPE_C_MUX_1: + case TYPE_C_MUX_2: + /* USB Type-C Crossbar Switch de-initialization */ + Context.MuxInfo[TypeCMuxId].TypeCSwitch_Drv->DeInit(Context.MuxInfo[TypeCMuxId].I2C_Address_TypeCSwitch); + + /* DisplayPort Linear Redriver de-initialization */ + Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->DeInit(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver); + + if (TypeCMuxId == TYPE_C_MUX_1) + { + MUX_DebounceTimerResetConfig(); + MUX_SEL_DeInit(SEL_HPDIN); + } + else + { + /* DET_HPD_SOURCE */ + MUX_DET_DeInit(); + } + + /* Update Context */ + Context.MuxInfo[TypeCMuxId].State = MUX_NOT_INITIALIZED; + + /* De-initialize the debounce timer (if not required anymore)*/ + if ((Context.MuxInfo[TYPE_C_MUX_1].State == MUX_NOT_INITIALIZED) && + (Context.MuxInfo[TYPE_C_MUX_2].State == MUX_NOT_INITIALIZED)) + { + MUX_DebounceTimerResetConfig(); + } + + break; + + default: + ret++; + break; + } + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Power on the Type-C MUX. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_Enable(MUX_TypeCMuxIdTypeDef TypeCMuxId) +{ + uint32_t ret = 0; + + switch (TypeCMuxId) + { + case TYPE_C_MUX_1: + case TYPE_C_MUX_2: + /* Power on USB Type-C Crossbar Switch */ + ret += Context.MuxInfo[TypeCMuxId].TypeCSwitch_Drv->PowerOn(Context.MuxInfo[TypeCMuxId].I2C_Address_TypeCSwitch); + + /* Power on DisplayPort Linear Redriver */ + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->PowerOn(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver); + + break; + + default: + ret++; + break; + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} +/** + * @brief Power down the Type-C MUX. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_Disable(MUX_TypeCMuxIdTypeDef TypeCMuxId) +{ + uint32_t ret = 0; + + switch (TypeCMuxId) + { + case TYPE_C_MUX_1: + case TYPE_C_MUX_2: + /* Power off USB Type-C Crossbar Switch */ + ret += Context.MuxInfo[TypeCMuxId].TypeCSwitch_Drv->PowerOff(Context.MuxInfo[TypeCMuxId].I2C_Address_TypeCSwitch); + + /* Power down DisplayPort Linear Redriver */ + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->PowerOff(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver); + + break; + + default: + ret++; + break; + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Set the pin assignment of the USB Type-C connector when it operates + * in one of the following mode: + * DFP_D: Downstream Facing Port associated with a DisplayPort Source device + * UFP_D: Upstream Facing Port associated with a DisplayPort Source device + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @param TypeCPlugOrientation Type-C plug orientation + * This parameter can be take one of the following values: + * @arg PLUG_ORIENTATION_NORMAL + * @arg PLUG_ORIENTATION_FLIPPED + * @param TypeCConnectorPinAssignment Type-C connector pin assignment + * This parameter can be take one of the following values: + * @arg DFP_PIN_ASSIGNMMENT_A + * @arg DFP_PIN_ASSIGNMMENT_B + * @arg DFP_PIN_ASSIGNMMENT_C + * @arg DFP_PIN_ASSIGNMMENT_D + * @arg DFP_PIN_ASSIGNMMENT_E + * @arg DFP_PIN_ASSIGNMMENT_F + * @arg UFP_PIN_ASSIGNMMENT_A + * @arg UFP_PIN_ASSIGNMMENT_B + * @arg UFP_PIN_ASSIGNMMENT_C + * @arg UFP_PIN_ASSIGNMMENT_D + * @arg UFP_PIN_ASSIGNMMENT_E + * @arg UFP_PIN_ASSIGNMMENT_F + * @arg USB_ONLY_PIN_ASSIGNMMENT + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_SetDPPinAssignment(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_TypeCPlugOrientationTypeDef TypeCPlugOrientation, + MUX_TypeCConnectorPinAssignmentTypeDef TypeCConnectorPinAssignment) +{ + uint32_t ret = 0; + TYPECSWITCH_Mode_t Mode; + + Mode = ModeSelect[TypeCPlugOrientation][TypeCConnectorPinAssignment]; + + if (Context.MuxInfo[TypeCMuxId].TypeCSwitch_Drv->IsSupportedMode(Mode)) + { + /* Set Alt. mode */ + ret += Context.MuxInfo[TypeCMuxId].TypeCSwitch_Drv->SetMode(Context.MuxInfo[TypeCMuxId].I2C_Address_TypeCSwitch, Mode); + + /* Enable Display Port channels (if required) */ + switch(TypeCConnectorPinAssignment) + { + case USB_ONLY_PIN_ASSIGNMMENT: + /* no DP channel enabled */ + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->DisableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP0); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->DisableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP1); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->DisableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP2); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->DisableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP3); + break; + case DFP_PIN_ASSIGNMMENT_B: + case DFP_PIN_ASSIGNMMENT_D: + case DFP_PIN_ASSIGNMMENT_F: + case UFP_PIN_ASSIGNMMENT_B: + case UFP_PIN_ASSIGNMMENT_D: + case UFP_PIN_ASSIGNMMENT_F: + /* Enable Display Port ML0 and ML1 */ + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->EnableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP0); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->EnableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP1); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->DisableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP2); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->DisableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP3); + break; + case DFP_PIN_ASSIGNMMENT_A: + case DFP_PIN_ASSIGNMMENT_C: + case DFP_PIN_ASSIGNMMENT_E: + case UFP_PIN_ASSIGNMMENT_A: + case UFP_PIN_ASSIGNMMENT_C: + case UFP_PIN_ASSIGNMMENT_E: + /* Enable Display Port ML0, ML1, ML2 and ML3 */ + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->EnableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP0); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->EnableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP1); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->EnableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP2); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->EnableChannel(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP3); + break; + } + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Set the equalizer gain for all the channels + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @param EQGain Equalizer gain. + * TYPE_C_MUX_1: This parameter must be a value between 0x00 and @ref MUX_1_EQGAIN_MAX. + * TYPE_C_MUX_2: This parameter must be a value between 0x00 and @ref MUX_2_EQGAIN_MAX. + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_SetEQGain(MUX_TypeCMuxIdTypeDef TypeCMuxId, + uint8_t EQGain) +{ + uint32_t ret = 1; + + if (((TYPE_C_MUX_1 == TypeCMuxId) && (MUX_1_EQGAIN_MAX >= EQGain)) + || ((TYPE_C_MUX_2 == TypeCMuxId) && (MUX_2_EQGAIN_MAX >= EQGain))) + { + ret = 0; + /* Set EQ gain for Port ML0, ML1, ML2 and ML3 */ + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->SetEQGain(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP0, EQGain); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->SetEQGain(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP1, EQGain); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->SetEQGain(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP2, EQGain); + ret += Context.MuxInfo[TypeCMuxId].DPRedriver_Drv->SetEQGain(Context.MuxInfo[TypeCMuxId].I2C_Address_DPRedriver, CHANNEL_DP3, EQGain); + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Set the HPD level seen by the DP source device. + * @note This function is used to enable DisplayPort HPD signaling + * through PD messaging. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @param HPDState Hot Plud Detection (HPD) state + * This parameter can be take one of the following values: + * @arg HPD_STATE_LOW + * @arg HPD_STATE_HIGH + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_SetHPDState(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_HPDStateTypeDef HPDState) +{ + uint32_t ret = 0; + + switch (TypeCMuxId) + { + case TYPE_C_MUX_1: + if(HPD_STATE_LOW == HPDState) + { + MUX_SEL_Off(SEL_HPDIN); + } + else + { + MUX_SEL_On(SEL_HPDIN); + } + break; + + default: + ret++; + break; + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Retrieve actual HPD level of the DP source device. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @param pHPDState pointer to the Hot Plud Detection (HPD) state + * This parameter can be take one of the following values: + * @arg HPD_STATE_LOW + * @arg HPD_STATE_HIGH + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_GetHPDState(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_HPDStateTypeDef * pHPDState) +{ + uint32_t ret = 0; + + /* Initialize returned HPDState */ + *pHPDState = HPD_STATE_LOW; + + /* Read HPDState */ + switch (TypeCMuxId) + { + case TYPE_C_MUX_2: + *pHPDState = (MUX_HPDStateTypeDef)MUX_DET_GetState(); + break; + + default: + ret++; + break; + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Generate an HPD_IRQ towards the DP source device. + * @note This function must be called every time an HPD_IRQ is detected by the + * PD communication stack. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_HPDIRQ(MUX_TypeCMuxIdTypeDef TypeCMuxId) +{ + MUX_StatusTypeDef ret = MUX_ERROR; + + return ret; +} + +/** + * @brief Display port hot plug detection (HPD)function. + * @note This function must be called when a display bort capable device + * is connected to the Display Port source receptacle of the MB1352 + * daughter board. + * @retval none + */ +void BSP_MUX_Detect_HPD(void) +{ + if (Context.pfnHPDCallbackFunc != (MUX_HPDCallbackFuncTypeDef *)NULL) + { + HAL_TIM_Base_Start_IT(&htim); + } +} + +/** + * @brief HPD callback function registration. + * @note The sink device drives a hot plug detect (HPD) signal to notify the + * source that a sink is present. + * @note Once registered, HPD callback function will be called upon connection + * disconnection of a DP Sink device. + * @param TypeCMuxId Type-C MUX identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_MUX_1 + * @arg TYPE_C_MUX_2 + * @param pHPDCallbackFunc HPD callback function pointer + * @retval mux status + */ +MUX_StatusTypeDef BSP_MUX_RegisterHPDCallbackFunc(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_HPDCallbackFuncTypeDef * pHPDCallbackFunc) +{ + uint8_t ret = 0; + + if (TypeCMuxId == TYPE_C_MUX_2) + { + Context.pfnHPDCallbackFunc = pHPDCallbackFunc; + } + else + { + ret++; + } + + return (ret == 0) ? MUX_OK : MUX_ERROR; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Enable Debounce Timer clock */ + DEBOUNCE_TIM_CLK_ENABLE(); + + /* NVIC configuration for debounce timer interrupt */ + HAL_NVIC_SetPriority(DEBOUNCE_TIM_IRQn, 1, 0); + HAL_NVIC_EnableIRQ(DEBOUNCE_TIM_IRQn); +} + +/** + * @brief DeInitialize TIM Base MSP. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Enable Debounce Timer clock */ + DEBOUNCE_TIM_CLK_DISABLE(); + + /* Disable Debounce timer interrupt */ + HAL_NVIC_DisableIRQ(DEBOUNCE_TIM_IRQn); +} + +#if defined(TUSB546_DEBUG) || defined(CBTL08GP053_DEBUG) || defined(SN65DP141_DEBUG) +/** + * @brief Dump the register content of a device . + * @param Device device(s) + * This parameter can be any combination of the following values: + * DEVICE_CBTL08GP053 + * DEVICE_SN65DP141 + * DEVICE_TUSB546 + * @retval none + */ +void BSP_MUX_DumpDeviceRegisters(uint32_t Device) +{ +#if defined(CBTL08GP053_DEBUG) + if ((Device & DEVICE_CBTL08GP053) == DEVICE_CBTL08GP053) + { + printf("\n\tCBTL08GP053 registers dump:\n"); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_SYS_CTRL, &Context.CBTL08GP053_Registers.SysCtrl.Register); + printf("\t\tSYS_CTRL : 0x%0.2x\n", Context.CBTL08GP053_Registers.SysCtrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_OP1_CTRL, &Context.CBTL08GP053_Registers.Op1Ctrl.Register); + printf("\t\tOP1_CTRL : 0x%0.2x\n", Context.CBTL08GP053_Registers.Op1Ctrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_OP2_CTRL, &Context.CBTL08GP053_Registers.Op2Ctrl.Register); + printf("\t\tOP2_CTRL : 0x%0.2x\n", Context.CBTL08GP053_Registers.Op2Ctrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_OP3_CTRL, &Context.CBTL08GP053_Registers.Op3Ctrl.Register); + printf("\t\tOP3_CTRL : 0x%0.2x\n", Context.CBTL08GP053_Registers.Op3Ctrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_OP4_CTRL, &Context.CBTL08GP053_Registers.Op4Ctrl.Register); + printf("\t\tOP4_CTRL : 0x%0.2x\n", Context.CBTL08GP053_Registers.Op4Ctrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_OP5_CTRL, &Context.CBTL08GP053_Registers.Op5Ctrl.Register); + printf("\t\tOP5_CTRL : 0x%0.2x\n", Context.CBTL08GP053_Registers.Op5Ctrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_CROSS5_CTRL, &Context.CBTL08GP053_Registers.Cross5Ctrl.Register); + printf("\t\tCROSS5_CTRL: 0x%0.2x\n", Context.CBTL08GP053_Registers.Cross5Ctrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_SW_CTRL, &Context.CBTL08GP053_Registers.SwCtrl.Register); + printf("\t\tSW_CTRL : 0x%0.2x\n", Context.CBTL08GP053_Registers.SwCtrl.Register); + MUX_IO_Read(MUX_2_TYPEC_SWITCH_I2C_ADDRESS, CBTL08GP053_REG_REVISION, &Context.CBTL08GP053_Registers.Revision); + printf("\t\tREVISION : 0x%0.2x\n", Context.CBTL08GP053_Registers.Revision); + } +#endif /* CBTL08GP053_DEBUG */ + +#if defined(SN65DP141_DEBUG) + if ((Device & DEVICE_SN65DP141) == DEVICE_SN65DP141) + { + printf("\n\tSN65DP141 registers dump:\n"); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CFG, &Context.SN65DP141_Registers.General.Register); + printf("\t\tGeneral Device Settings : 0x%0.2x\n", Context.SN65DP141_Registers.General.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CHEN, &Context.SN65DP141_Registers.ChannelEnable.Register); + printf("\t\tChannel Enable : 0x%0.2x\n", Context.SN65DP141_Registers.ChannelEnable.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH0_CFG, &Context.SN65DP141_Registers.Channel0Ctrl.Register); + printf("\t\tChannel 0 Control Settings: 0x%0.2x\n", Context.SN65DP141_Registers.Channel0Ctrl.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH0_EN, &Context.SN65DP141_Registers.Channel0Enable.Register); + printf("\t\tChannel 0 Enable Settings : 0x%0.2x\n", Context.SN65DP141_Registers.Channel0Enable.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH1_CFG, &Context.SN65DP141_Registers.Channel1Ctrl.Register); + printf("\t\tChannel 1 Control Settings: 0x%0.2x\n", Context.SN65DP141_Registers.Channel1Ctrl.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH1_EN, &Context.SN65DP141_Registers.Channel1Enable.Register); + printf("\t\tChannel 1 Enable Settings : 0x%0.2x\n", Context.SN65DP141_Registers.Channel1Enable.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH2_CFG, &Context.SN65DP141_Registers.Channel2Ctrl.Register); + printf("\t\tChannel 2 Control Settings: 0x%0.2x\n", Context.SN65DP141_Registers.Channel2Ctrl.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH2_EN, &Context.SN65DP141_Registers.Channel2Enable.Register); + printf("\t\tChannel 2 Enable Settings : 0x%0.2x\n", Context.SN65DP141_Registers.Channel2Enable.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH3_CFG, &Context.SN65DP141_Registers.Channel3Ctrl.Register); + printf("\t\tChannel 3 Control Settings: 0x%0.2x\n", Context.SN65DP141_Registers.Channel3Ctrl.Register); + MUX_IO_Read(MUX_2_DP_REDRIVER_I2C_ADDRESS, SN65DP141_REG_CH3_EN, &Context.SN65DP141_Registers.Channel3Enable.Register); + printf("\t\tChannel 3 Enable Settings : 0x%0.2x\n", Context.SN65DP141_Registers.Channel3Enable.Register); + } +#endif /* SN65DP141_DEBUG */ + +#if defined(TUSB546_DEBUG) + if ((Device & DEVICE_TUSB546) == DEVICE_TUSB546) + { + MUX_IO_Read(MUX_1_TYPEC_SWITCH_I2C_ADDRESS, TUSB546_REG_CTRL, &Context.TUSB546_Registers.General.Register); + MUX_IO_Read(MUX_1_TYPEC_SWITCH_I2C_ADDRESS, TUSB546_REG_DP_CTRL1, &Context.TUSB546_Registers.DPCtrlStatus10.Register); + MUX_IO_Read(MUX_1_TYPEC_SWITCH_I2C_ADDRESS, TUSB546_REG_DP_CTRL2, &Context.TUSB546_Registers.DPCtrlStatus11.Register); + MUX_IO_Read(MUX_1_TYPEC_SWITCH_I2C_ADDRESS, TUSB546_REG_DP_CTRL3, &Context.TUSB546_Registers.DPCtrlStatus12.Register); + MUX_IO_Read(MUX_1_TYPEC_SWITCH_I2C_ADDRESS, TUSB546_REG_DP_CTRL4, &Context.TUSB546_Registers.DPCtrlStatus13.Register); + } +#endif /* TUSB546_DEBUG */ +} +#endif /* TUSB546_DEBUG || CBTL08GP053_DEBUG || SN65DP141_DEBUG */ +/** + * @} + */ + + +/** @addtogroup STM32G0C1E_EVAL_MUX_Private_Functions + * @{ + */ +/** +* @brief Configures DET GPIO. +* @note This function configures Detection GPIO pin for DET_HPD_SOURCE +* @retval None +*/ +static void MUX_DET_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Enable the GPIO_DET clock */ + DET_HPD_SOURCE_GPIO_CLK_ENABLE(); + + /* Configure the GPIO_MOS pin */ + GPIO_InitStruct.Pin = DET_HPD_SOURCE_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + + HAL_GPIO_Init(DET_HPD_SOURCE_GPIO_PORT, &GPIO_InitStruct); + + /* Enable and set EXTI lines Interrupt to the lowest priority */ + HAL_NVIC_SetPriority(DET_EXTI_IRQn, 2, 0); + HAL_NVIC_EnableIRQ(DET_EXTI_IRQn); +} + +/** +* @brief Reset DET GPIO configuration. +* @note This function resets configuration of Detection GPIO pin for DET_HPD_SOURCE +* @retval None +*/ +static void MUX_DET_DeInit(void) +{ + /* Disable EXTI lines Interrupt */ + HAL_NVIC_DisableIRQ(DET_EXTI_IRQn); + HAL_GPIO_DeInit(DET_HPD_SOURCE_GPIO_PORT, DET_HPD_SOURCE_PIN); +} + +/** +* @brief Returns the selected Detect state. +* @note This function returns GPIO pin state for DET_HPD_SOURCE +* @retval The Detect GPIO pin value +*/ +static MUX_DETState_TypeDef MUX_DET_GetState(void) +{ + GPIO_PinState PinState; + + PinState = HAL_GPIO_ReadPin(DET_HPD_SOURCE_GPIO_PORT, DET_HPD_SOURCE_PIN); + /* Update Context */ + Context.HPDState = HPD_STATE_LOW; + if (GPIO_PIN_SET == PinState) + { + Context.HPDState = HPD_STATE_HIGH; + } + + return (PinState == GPIO_PIN_RESET) ? DET_STATE_LOW : DET_STATE_HIGH; +} + +/** +* @brief Configures SEL GPIO. +* @param Sel Specifies the Select Pin to be configured. +* This parameter can be one of following parameters: +* @arg SEL_HPDIN +* @retval None +*/ +static void MUX_SEL_Init(SelectId_TypeDef Sel) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Enable the GPIO_DET clock */ + SELx_GPIO_CLK_ENABLE(Sel); + + /* Configure the GPIO_MOS pin */ + GPIO_InitStruct.Pin = SEL_PIN[Sel]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + + HAL_GPIO_Init(SEL_PORT[Sel], &GPIO_InitStruct); + + HAL_GPIO_WritePin(SEL_PORT[Sel], SEL_PIN[Sel], GPIO_PIN_RESET); +} + +/** +* @brief Reset SEL GPIO configuration. +* @param Sel Specifies the Select Pin. +* This parameter can be one of following parameters: +* @arg SEL_HPDIN +* @retval None +*/ +static void MUX_SEL_DeInit(SelectId_TypeDef Sel) +{ + HAL_GPIO_DeInit(SEL_PORT[Sel], SEL_PIN[Sel]); +} + +/** +* @brief Turns selected Sel On. +* @param Sel Specifies the Select Pin to be configured. +* This parameter can be one of following parameters: +* @arg SEL_HPDIN +* @retval None +*/ +static void MUX_SEL_On(SelectId_TypeDef Sel) +{ + HAL_GPIO_WritePin(SEL_PORT[Sel], SEL_PIN[Sel], GPIO_PIN_SET); +} + +/** +* @brief Turns selected Det Off. +* @param Sel Specifies the Select Pin to be configured. +* This parameter can be one of following parameters: +* @arg SEL_HPDIN +* @retval None +*/ +static void MUX_SEL_Off(SelectId_TypeDef Sel) +{ + HAL_GPIO_WritePin(SEL_PORT[Sel], SEL_PIN[Sel], GPIO_PIN_RESET); +} + +/** +* @brief Set debounce timer configuration. +* @param DebounceTime Debounce time (in us) +* @retval None +*/ +static void MUX_DebounceTimerSetConfig(uint32_t DebounceTime) +{ + __HAL_TIM_RESET_HANDLE_STATE(&htim); + + htim.Init.Prescaler = (DEBOUNCE_TIM_COUNTER_CLK_FREQ() / 1000000) -1; + htim.Init.CounterMode = TIM_COUNTERMODE_UP; + htim.Init.Period = DebounceTime - 1; + htim.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim.Init.RepetitionCounter = 0; + htim.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + + HAL_TIM_Base_Init(&htim); +} + +/** +* @brief Reset debounce timer configuration. +* @retval None +*/ +static void MUX_DebounceTimerResetConfig(void) +{ + HAL_TIM_Base_DeInit(&htim); +} + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + HAL_TIM_Base_Stop_IT(htim); + + if ((Context.HPDState == HPD_STATE_LOW) && (DET_STATE_HIGH == MUX_DET_GetState())) + { + /* Invoke registered callback function */ + Context.pfnHPDCallbackFunc(TYPE_C_MUX_2, HPD_STATE_HIGH); + } + + if ((Context.HPDState == HPD_STATE_HIGH) && (DET_STATE_LOW == MUX_DET_GetState())) + { + /* Invoke registered callback function */ + Context.pfnHPDCallbackFunc(TYPE_C_MUX_2, HPD_STATE_LOW); + } +} +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_mux.h b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_mux.h new file mode 100644 index 0000000..28f9507 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_mux.h @@ -0,0 +1,226 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_mux.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * stm32g0c1e_eval_mux.c firmware driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0C1E_EVAL_MUX_H +#define STM32G0C1E_EVAL_MUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "../Components/sn65dp141/sn65dp141.h" +#include "../Components/cbtl08gp053/cbtl08gp053.h" +#include "../Components/tusb546/tusb546.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_MUX STM32G0C1E_EVAL MUX + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Exported_Defines Exported Defines + * @{ + */ + +#define MUX_1_EQGAIN_MAX TUSB546_EQGAIN_15 +#define MUX_2_EQGAIN_MAX SN65DP141_EQGAIN_7 + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Exported_Types Exported Types + * @{ + */ + +/** + * @brief MUX Status + */ +typedef enum +{ + MUX_OK = 0, + MUX_ERROR +} MUX_StatusTypeDef; + +/** + * @brief Type-C MUX identifier + */ +typedef enum +{ + TYPE_C_MUX_1 = 0, + TYPE_C_MUX_2, + TYPE_C_MUX_NB +} MUX_TypeCMuxIdTypeDef; + +/** + * @brief Type-C connector pin assignments + */ +typedef enum +{ + DFP_PIN_ASSIGNMMENT_A = 0, /*!< USB Type-C to USB Type-C or Protocol Converter */ + DFP_PIN_ASSIGNMMENT_B, /*!< USB Type-C to USB Type-C or Protocol Converter */ + DFP_PIN_ASSIGNMMENT_C, /*!< USB Type-C to USB Type-C or Protocol Converter */ + DFP_PIN_ASSIGNMMENT_D, /*!< USB Type-C to USB Type-C or Protocol Converter */ + DFP_PIN_ASSIGNMMENT_E, /*!< USB Type-C to DisplayPort */ + DFP_PIN_ASSIGNMMENT_F, /*!< USB Type-C to DisplayPort */ + UFP_PIN_ASSIGNMMENT_A, /*!< USB Type-C to USB Type-C or Protocol Converter */ + UFP_PIN_ASSIGNMMENT_B, /*!< USB Type-C to USB Type-C or Protocol Converter */ + UFP_PIN_ASSIGNMMENT_C, /*!< USB Type-C to USB Type-C or Protocol Converter */ + UFP_PIN_ASSIGNMMENT_D, /*!< USB Type-C to USB Type-C or Protocol Converter */ + UFP_PIN_ASSIGNMMENT_E, /*!< USB Type-C to USB Type-C or Protocol Converter */ + UFP_PIN_ASSIGNMMENT_F, /*!< USB Type-C to USB Type-C or Protocol Converter */ + USB_ONLY_PIN_ASSIGNMMENT /*!< USB 3.1 Only */ +} MUX_TypeCConnectorPinAssignmentTypeDef; + +/** + * @brief Type-C port plug orientation + */ +typedef enum +{ + PLUG_ORIENTATION_NORMAL = 0, + PLUG_ORIENTATION_FLIPPED +} MUX_TypeCPlugOrientationTypeDef; + +/** + * @brief HDP (Hot Plug Detection) state + */ +typedef enum +{ + HPD_STATE_LOW = 0, + HPD_STATE_HIGH +} MUX_HPDStateTypeDef; + +/** + * @brief HPD Callback Function Pointer + */ +typedef void MUX_HPDCallbackFuncTypeDef(MUX_TypeCMuxIdTypeDef TypeCMuxId, MUX_HPDStateTypeDef HPDState); + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Exported_Constants Exported Constants + * @{ + */ +#define DETn 2 + +#define DET_HPD_SOURCE_PIN GPIO_PIN_6 /* PC.06 */ +#define DET_HPD_SOURCE_GPIO_PORT GPIOC +#define DET_HPD_SOURCE_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define DET_HPD_SOURCE_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() + +#define DET_EXTI_IRQn EXTI4_15_IRQn +#define DET_EXTI_IRQHandler EXTI4_15_IRQHandler + +#define SELn 1 + +#define SEL_HPDIN_PIN GPIO_PIN_5 /* PB.05 */ +#define SEL_HPDIN_GPIO_PORT GPIOB +#define SEL_HPDIN_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define SEL_HPDIN_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() + +#define DEBOUNCE_TIM_INSTANCE TIM6 +#define DEBOUNCE_TIM_CLK_ENABLE() __HAL_RCC_TIM6_CLK_ENABLE() +#define DEBOUNCE_TIM_CLK_DISABLE() __HAL_RCC_TIM6_CLK_DISABLE() +#define DEBOUNCE_TIM_COUNTER_CLK_FREQ() HAL_RCC_GetPCLK1Freq() +#define DEBOUNCE_TIM_IRQn TIM6_DAC_LPTIM1_IRQn +#define DEBOUNCE_TIME 1000u /* 1ms */ +#define DEBOUNCE_TIM_IRQHandler TIM6_DAC_LPTIM1_IRQHandler +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Exported_Variables Exported Variables + * @{ + */ +extern TIM_HandleTypeDef htim; +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_MUX_Exported_Functions Exported Functions + * @{ + */ +MUX_StatusTypeDef BSP_MUX_Init(MUX_TypeCMuxIdTypeDef TypeCMuxId); + +MUX_StatusTypeDef BSP_MUX_DeInit(MUX_TypeCMuxIdTypeDef TypeCMuxId); + +MUX_StatusTypeDef BSP_MUX_Enable(MUX_TypeCMuxIdTypeDef TypeCMuxId); + +MUX_StatusTypeDef BSP_MUX_Disable(MUX_TypeCMuxIdTypeDef TypeCMuxId); + +MUX_StatusTypeDef BSP_MUX_SetDPPinAssignment(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_TypeCPlugOrientationTypeDef TypeCPlugOrientation, + MUX_TypeCConnectorPinAssignmentTypeDef TypeCConnectorPinAssignment); + +MUX_StatusTypeDef BSP_MUX_SetEQGain(MUX_TypeCMuxIdTypeDef TypeCMuxId, + uint8_t EQGain); + +MUX_StatusTypeDef BSP_MUX_SetHPDState(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_HPDStateTypeDef HPDState); + +MUX_StatusTypeDef BSP_MUX_GetHPDState(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_HPDStateTypeDef * pHPDState); + +MUX_StatusTypeDef BSP_MUX_HPDIRQ(MUX_TypeCMuxIdTypeDef TypeCMuxId); + +void BSP_MUX_Detect_HPD(void); + +MUX_StatusTypeDef BSP_MUX_RegisterHPDCallbackFunc(MUX_TypeCMuxIdTypeDef TypeCMuxId, + MUX_HPDCallbackFuncTypeDef * pHPDCallbackFunc); + +#if defined(TUSB546_DEBUG) || defined(CBTL08GP053_DEBUG) || defined(SN65DP141_DEBUG) +#define DEVICE_CBTL08GP053 0x00000001U +#define DEVICE_SN65DP141 0x00000002U +#define DEVICE_TUSB546 0x00000004U +void BSP_MUX_DumpDeviceRegisters(uint32_t Device); +#endif /* TUSB546_DEBUG || CBTL08GP053_DEBUG || SN65DP141_DEBUG */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0C1E_EVAL_MUX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.c b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.c new file mode 100644 index 0000000..0bbcdd9 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.c @@ -0,0 +1,3407 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_pwr.c + * @author MCD Application Team + * @brief This file provides a set of functions needed to manage the Type-C + * Power Delivery (PD): + * - VBUS control + * - VBUS voltage/current measurement + * - VCONN control + * - VBUS presence detection + * - DCDC voltage measurement (MB1352C only) + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#if defined(_TRACE)||defined(_GUI_INTERFACE) +#define PWR_DEBUG +#endif /* _TRACE || _GUI_INTERFACE*/ +#include "stm32g0c1e_eval_pwr.h" +#include "stm32g0c1e_eval.h" +#include "stm32g0xx_hal.h" +#include "stm32g0xx_ll_lptim.h" +#include "string.h" +#ifdef PWR_DEBUG +#include "usbpd_core.h" +#include "usbpd_trace.h" +#endif +/* USER CODE BEGIN include */ +/* USER CODE END include */ + + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL_POWER + * @{ + */ +/** @defgroup STM32G0C1E_EVAL_POWER_Private_Typedef Private Typedef + * @{ + */ +/* USER CODE BEGIN POWER_Private_Typedef */ +/* Vref voltage level (in mV) */ +#define VREFANALOG_VOLTAGE 3300 + +/** + * @brief USB PD PPS values + */ +typedef enum +{ + VBUS_5_V = 0u, + VBUS_9_V = 1u, + VBUS_15_V = 2u, + VBUS_18_V = 3u, + VBUS_PPS_V = 4u, + VBUS_LEVEL_NB = 5u +} VBUS_Level_TypeDef; + +typedef enum +{ + ADC_VSENSE_1 = 0u, /*< PB1 ADC used to get VBUS1 voltage level */ + ADC_ISENSE_1 = 1u, /*< PB10 ADC used to get VBUS1 curent value */ + ADC_VSENSE_2 = 2u, /*< PA3 ADC used to get VBUS2 voltage level */ + ADC_ISENSE_2 = 3u, /*< PB12 ADC used to get VBUS2 curent value */ + ADC_VSENSE_DCDC = 4u /*< PB11 ADC used to get DCDC voltage level */ +} ADC_ChannelId_TypeDef; + +typedef enum +{ + GPIO_SOURCE_EN = 0u, /*< PC6 Handle Source power Mos */ + GPIO_VBUS_DISCHARGE1 = 1u, /*< PB13 Handle Discharge Mos on VBUS1 */ + GPIO_VBUS_DISCHARGE2 = 2u, /*< PB14 Handle Discharge Mos on VBUS2 */ + GPIO_VCONN_EN1 = 3u, /*< PD4 Handle Vconn on VBUS1 */ + GPIO_VCONN_EN2 = 4u, /*< PB9 Handle Vconn on VBUS2 */ + GPIO_VCONN_DISCHARGE1 = 5u, /*< PA2 Handle Fast Role Swap on VBUS1 CC1 line or Vconn Discharge */ + GPIO_VCONN_DISCHARGE2 = 6u, /*< PPB0 Handle Fast Role Swap on VBUS1 CC2 line or Vconn Discharge */ + GPIO_V_CTL1 = 7u, /*< PC1 VBUS voltage level control */ + GPIO_V_CTL2 = 8u /*< PB5 (Rev. A/B) or PA1 (Rev. C) VBUS voltage level control */ +} GPIO_Id_TypeDef; + +typedef enum +{ + PORT_NOT_INITIALIZED = 0u, + PORT_INITIALIZED +} PWR_PortStateTypedef; + +typedef enum +{ + POWER_NONE, + POWER_FIXED, + POWER_VARIABLE, + POWER_APDO +} PWR_Type; + + +typedef struct +{ + PWR_PortStateTypedef State; + USBPD_PWR_PowerRoleTypeDef Role; + uint32_t VBUSDisconnectionThreshold; + USBPD_PWR_VBUSConnectionStatusTypeDef VBUSConnectionStatus; + USBPD_PWR_VBUSDetectCallbackFunc * pfnVBUSDetectCallback; + PWR_Type Type; + uint32_t VBUSVoltage; +} PortInfoTypeDef; + + +typedef struct +{ + uint8_t ADCRefCount; + USBPD_PWR_DCDCCtrlModeTypeDef DCDCCtrlMode; + PortInfoTypeDef PortInfo[USBPD_PWR_INSTANCES_NBR]; +} ContextTypeDef; + +/* USER CODE END POWER_Private_Typedef */ +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Private_Constants Private Constants + * @{ + */ +/* USER CODE BEGIN POWER_Private_Constants */ + +/* VDD voltage (in mv)*/ +#define VDD 3300 + +/* Maximum digital value of the ADC output (12 Bits resolution) + To converting ADC measurement to an absolute voltage value: + VCHANNELx = ADCx_DATA x (VDD/ADC_FULL_SCALE) +*/ +#define ADC_FULL_SCALE 0x0FFFu + +/* VBUS connection detection voltage threshold (in mV) */ +#define VBUS_CONNECTION_THRESHOLD 3000u + +/* VBUS disconnection detection voltage threshold (in mV) */ +#define VBUS_DISCONNECTION_THRESHOLD 2200u + +/* Resistor voltage divider */ +#define RA 330000u +#define RB 49900u + +/* VBUS power source calibration parameters */ +#define BSP_USBPD_PWR_DCDC_POLL_TIME 1u /* DCDC polling periode in mS */ +#define BSP_USBPD_PWR_DCDC_MAX_PWM_VALUE (3200u) /* DCDC Vref: Max pwm min value 3.8V on RevB */ +#define BSP_USBPD_PWR_DCDC_MIN_PWM_VALUE (1u) /* DCDC Vref: Max pwm max value 18V on RevB */ +#define BSP_USBPD_PWR_DCDC_MAX_PWM_STEP (55u) /* DCDC Vref: Max pwm step = Full scale/25mS */ +#define BSP_USBPD_PWR_DCDC_MIN_PWM_STEP (1u) /* DCDC Vref: Min pwm step */ +#define BSP_USBPD_PWR_DCDC_PLL_P_N (9u) /* DCDC Coef P (0.xx)*/ +#define BSP_USBPD_PWR_DCDC_PLL_P_D (9u) /* DCDC Coef P */ +#define BSP_USBPD_PWR_DCDC_PLL_D_N (7u) /* DCDC Coef D (0.xx) */ +#define BSP_USBPD_PWR_DCDC_PLL_D_D (8u) /* DCDC Coef D */ + +#define PWM_MAX_VALUES_LUT_PPS 131u + +/* VBUS voltage level values (in mV) */ +#define VBUS_VOLTAGE_0V_IN_MV 0u +#define VBUS_VOLTAGE_5V_IN_MV 5000u +#define VBUS_VOLTAGE_9V_IN_MV 9000u +#define VBUS_VOLTAGE_15V_IN_MV 15000u +#define VBUS_VOLTAGE_18V_IN_MV 18000u + +/* VBUS sensing resume timout value (in ms)*/ +#define VBUS_SENSING_RESUME_TIMEOUT (1U) +/* USER CODE END POWER_Private_Constants */ +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Private_Macros Private Macros + * @{ + */ +/* USER CODE BEGIN POWER_Private_Macros */ +#define GPIOx_CLK_ENABLE(__GPIO__) do { if((__GPIO__) == GPIO_SOURCE_EN) {GPIO_SOURCE_EN_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_VBUS_DISCHARGE1) {GPIO_VBUS_DISCHARGE1_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_VBUS_DISCHARGE2) {GPIO_VBUS_DISCHARGE2_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_VCONN_EN1) {GPIO_VCONN_EN1_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_VCONN_EN2) {GPIO_VCONN_EN2_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_VCONN_DISCHARGE1) {GPIO_VCONN_DISCHARGE1_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_VCONN_DISCHARGE2) {GPIO_VCONN_DISCHARGE2_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_V_CTL1) {GPIO_V_CTL1_CLK_ENABLE();} else \ + if((__GPIO__) == GPIO_V_CTL2) {GPIO_V_CTL2_CLK_ENABLE();}} while(0u) + +#define ADCx_CHANNEL_GPIO_CLK_ENABLE(__ADC_CHANNEL__) \ + do { if ((__ADC_CHANNEL__) == ADCx_CHANNEL_VSENSE_1) {ADCx_CHANNEL_VSENSE_1_GPIO_CLK_ENABLE();} else \ + if ((__ADC_CHANNEL__) == ADCx_CHANNEL_ISENSE_1) {ADCx_CHANNEL_ISENSE_1_GPIO_CLK_ENABLE();} else \ + if ((__ADC_CHANNEL__) == ADCx_CHANNEL_VSENSE_2) {ADCx_CHANNEL_VSENSE_2_GPIO_CLK_ENABLE();} else \ + if ((__ADC_CHANNEL__) == ADCx_CHANNEL_ISENSE_2) {ADCx_CHANNEL_VSENSE_2_GPIO_CLK_ENABLE();} else \ + if ((__ADC_CHANNEL__) == ADCx_CHANNEL_VSENSE_DCDC) {ADCx_CHANNEL_VSENSE_DCDC_GPIO_CLK_ENABLE();}} while(0u) + +#define ABS(__VAL__) (((int32_t)(__VAL__)) < 0 ? - ((int32_t)(__VAL__)) : ((int32_t)(__VAL__))) + +/* USER CODE END POWER_Private_Macros */ +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Private_Variables Private Variables + * @{ + */ +/* USER CODE BEGIN POWER_Private_Variables */ +/** +* @brief GPIO variables +*/ +/* GPIO Id. / GPIO port cross table */ +static GPIO_TypeDef *GPIO_PORT[] = +{ + GPIO_SOURCE_EN_PORT, + GPIO_VBUS_DISCHARGE1_PORT, + GPIO_VBUS_DISCHARGE2_PORT, + GPIO_VCONN_EN1_PORT, + GPIO_VCONN_EN2_PORT, + GPIO_VCONN_DISCHARGE1_PORT, + GPIO_VCONN_DISCHARGE2_PORT, + GPIO_V_CTL1_PORT, + GPIO_V_CTL2_PORT +}; + +/* GPIO Id. / GPIO pin cross table */ +static const uint16_t GPIO_PIN[] = +{ + GPIO_SOURCE_EN_PIN, + GPIO_VBUS_DISCHARGE1_PIN, + GPIO_VBUS_DISCHARGE2_PIN, + GPIO_VCONN_EN1_PIN, + GPIO_VCONN_EN2_PIN, + GPIO_VCONN_DISCHARGE1_PIN, + GPIO_VCONN_DISCHARGE2_PIN, + GPIO_V_CTL1_PIN, + GPIO_V_CTL2_PIN +}; + +/* ADC Channel / GPIO port cross table */ +static GPIO_TypeDef * ADC_CHANNEL_PORT[ADCxChanneln] = +{ + ADCx_CHANNEL_VSENSE_1_GPIO_PORT, + ADCx_CHANNEL_ISENSE_1_GPIO_PORT, + ADCx_CHANNEL_VSENSE_2_GPIO_PORT, + ADCx_CHANNEL_ISENSE_2_GPIO_PORT, + ADCx_CHANNEL_VSENSE_DCDC_GPIO_PORT +}; + +/* ADC Channel / GPIO pin cross table */ +static const uint32_t ADC_CHANNEL_PIN[ADCxChanneln] = +{ + ADCx_CHANNEL_VSENSE_1_GPIO_PIN, + ADCx_CHANNEL_ISENSE_1_GPIO_PIN, + ADCx_CHANNEL_VSENSE_2_GPIO_PIN, + ADCx_CHANNEL_ISENSE_2_GPIO_PIN, + ADCx_CHANNEL_VSENSE_DCDC_GPIO_PIN +}; + +/* Variable containing ADC conversions results + aADCxConvertedValues[0u]: VSENSE_2 + aADCxConvertedValues[1u]: VSENSE_1 + aADCxConvertedValues[2u]: ISENSE_1 + aADCxConvertedValues[3u]: ISENSE_2 +*/ +static __IO uint16_t aADCxConvertedValues[4] = {0}; + +/* BSP PWR contextual data */ +static ContextTypeDef Context = +{ + .ADCRefCount = 0u, + .DCDCCtrlMode = DCDC_CTRL_MODE_UNKNOWN, + .PortInfo = + { + /* USBPD_PWR_TYPE_C_PORT_1 */ + { + .State = PORT_NOT_INITIALIZED, + .Role = POWER_ROLE_SOURCE, + .VBUSDisconnectionThreshold = VBUS_DISCONNECTION_THRESHOLD, + .VBUSConnectionStatus = VBUS_NOT_CONNECTED, + .pfnVBUSDetectCallback = NULL, + .VBUSVoltage = 0u, + }, + /* USBPD_PWR_TYPE_C_PORT_2 */ + { + .State = PORT_NOT_INITIALIZED, + .Role = POWER_ROLE_SINK, + .VBUSDisconnectionThreshold = VBUS_DISCONNECTION_THRESHOLD, + .VBUSConnectionStatus = VBUS_NOT_CONNECTED, + .pfnVBUSDetectCallback = NULL, + .VBUSVoltage = 0u, + } + } +}; + +/* VBUS sensing completed flag */ +static uint8_t VBUSSensingCompleted = 0u; + +/* Power source calibration related variables */ +static uint16_t aPWMDutyCycleLUT[VBUS_LEVEL_NB] = +{ + 0x00B0, /* 5V */ + 0x0200, /* 9V */ + 0x0300, /* 15V */ + 0x0400, /* 18V */ + 0x0000 /* Will be used to store latest PPS request */ +}; + +/* LPTIM handle */ +static LPTIM_HandleTypeDef hlptim = {0u}; + +#if defined(DBG_LOG) +#define DBG_LOG_SIZE 10 +uint8_t _DbgLogIndex = 0; + +uint32_t _vbusout[DBG_LOG_SIZE]; +int32_t _Err[DBG_LOG_SIZE]; +uint32_t _Pwm[DBG_LOG_SIZE]; +int32_t _PwmE[DBG_LOG_SIZE]; +#endif /* DBG_LOG */ + +/* USER CODE END POWER_Private_Variables */ +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Private_Functions Private Functions + * @{ + */ +/* USER CODE BEGIN POWER_Private_Prototypes */ +static uint8_t PWR_InitSource(uint32_t Instance); +static uint8_t PWR_DeInitSource(uint32_t Instance); +static uint8_t PWR_InitSink(void); +static uint8_t PWR_DeInitSink(void); +static void PWR_GPIO_Init(GPIO_Id_TypeDef gpio); +static void PWR_GPIO_DeInit(GPIO_Id_TypeDef gpio); +static void PWR_GPIO_On(GPIO_Id_TypeDef gpio); +static void PWR_GPIO_Off(GPIO_Id_TypeDef gpio); +static void LPTIMx_MspInit(void); +static void LPTIMx_MspDeInit(void); +static void PWR_ADC_MspInit(ADC_HandleTypeDef *hadc); +static void PWR_ADC_MspDeInit(ADC_HandleTypeDef *hadc); +static void PWR_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); +static uint8_t PWR_ADC_SetConfig(void); +static void PWR_ADC_ResetConfig(void); +static uint8_t PWR_ADC_SetChannelConfig(ADC_ChannelId_TypeDef ADCChannel); +static void PWR_ADC_ResetChannelConfig(ADC_ChannelId_TypeDef ADCChannel); +static uint32_t PWR_ConvertADCDataToVoltage(uint32_t ADCData); +static uint32_t PWR_ConvertVoltageToThreshold(uint32_t PWR_ConvertVoltageToThreshold); +static int32_t PWR_ConvertADCDataToCurrent(uint32_t ADCData); +static uint8_t PWR_StartVBusSensing(void); +static uint8_t PWR_StopVBusSensing(void); +static uint8_t PWR_PauseVBusSensing(void); +static uint8_t PWR_ResumeVBusSensing(void); +static uint8_t PWR_InitPowerSource(void); +static void PWR_DeInitPowerSource(void); +static void PWR_SetPWMDutyCycle(uint16_t PWMDutyCycle); +static uint16_t PWR_GetPWMDutyCycle(void); + +static void PWR_DCDCPreChargeC57(uint32_t Instance); + +static void PWR_VBUSDischarge(uint32_t Instance, + uint32_t VbusStopInmV, + uint32_t VbusErrorInmV, + uint16_t Delay); + +static int32_t PWR_VBUSSetVoltage(uint32_t Instance, + uint32_t VBusInmV, + uint16_t Precision); + +/* USER CODE END POWER_Private_Prototypes */ +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Imported_Variables Imported Variables + * @{ + */ +extern ADC_HandleTypeDef hadc1; +extern DMA_HandleTypeDef hdma_adc1; +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_POWER_Exported_Functions + * @{ + */ +/** + * @brief Get the VSENSE_DCDC measurement with DCDC_EN = 0 and = 1 + * controller. + * @param voltageDCDCOff + * @param voltageDCDCOnT0 at T0 + * @param voltageDCDCOnT10 at T10 = 100ms + * @retval none + */ +void BSP_PWR_VBUSIsGPIO(uint32_t *voltageDCDCOff, uint32_t *voltageDCDCOnT0, uint32_t *voltageDCDCOnT10) +{ + uint8_t error = 0; + GPIO_InitTypeDef gpio_config = {0}; + ADC_HandleTypeDef hadc = {0}; + ADC_ChannelConfTypeDef adc_channel_config = {0}; + GPIO_InitTypeDef GPIO_InitStruct; + + *voltageDCDCOff = *voltageDCDCOnT0 = *voltageDCDCOnT10 = 0; + + /* Enable GPIO clock */ + DB_DETECT_GPIO_CLK_ENABLE(); + + /* Configure GPIO pin of the selected ADC channel */ + gpio_config.Pin = DB_DETECT_PIN; + gpio_config.Mode = GPIO_MODE_ANALOG; + gpio_config.Pull = GPIO_NOPULL; + HAL_GPIO_Init(DB_DETECT_GPIO_PORT, &gpio_config); + + /* Enable ADC clock */ + DB_ADC_CLK_ENABLE(); + + /* Register ADC MSP callback functions */ + if ((HAL_ADC_RegisterCallback(&hadc, HAL_ADC_MSPINIT_CB_ID, PWR_ADC_MspInit) != HAL_OK) + || (HAL_ADC_RegisterCallback(&hadc, HAL_ADC_MSPDEINIT_CB_ID, PWR_ADC_MspDeInit) != HAL_OK)) + { + /* Callback function registration Error */ + error++; + } + + /* Initialize ADC */ + hadc.Instance = DB_ADC; + + if (HAL_ADC_DeInit(&hadc) != HAL_OK) + { + /* ADC de-initialization Error */ + error++; + } + + + hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4; + hadc.Init.Resolution = ADC_RESOLUTION_12B; + hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD; + hadc.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc.Init.LowPowerAutoWait = DISABLE; + hadc.Init.LowPowerAutoPowerOff = DISABLE; + hadc.Init.ContinuousConvMode = ENABLE; + hadc.Init.DiscontinuousConvMode = DISABLE; + hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START; + hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; + hadc.Init.DMAContinuousRequests = DISABLE; + hadc.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; + hadc.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_39CYCLES_5; + hadc.Init.OversamplingMode = DISABLE; + + if (HAL_ADC_Init(&hadc) != HAL_OK) + { + error++; + } + + /* Register ADC conversion complete callback function */ + if (HAL_ADC_RegisterCallback(&hadc, HAL_ADC_CONVERSION_COMPLETE_CB_ID, PWR_ADC_ConvCpltCallback) != HAL_OK) + { + /* Callback function registration Error */ + error++; + } + + /* Run the ADC calibration */ + if (HAL_ADCEx_Calibration_Start(&hadc) != HAL_OK) + { + error++; + } + + /* Configure the ADC channel used to identify the daughter board */ + adc_channel_config.Channel = DB_ADC_CHANNEL; + adc_channel_config.Rank = ADC_RANK_CHANNEL_NUMBER; + adc_channel_config.SamplingTime = ADC_SAMPLINGTIME_COMMON_1; + + if (HAL_ADC_ConfigChannel(&hadc, &adc_channel_config) != HAL_OK) + { + error++; + } + + /* Initialise DCDC_EN = 0 */ + GPIO_V_CTL2_CLK_ENABLE(); + HAL_GPIO_DeInit(GPIO_PORT[GPIO_V_CTL2],GPIO_PIN[GPIO_V_CTL2]); + GPIO_InitStruct.Pin = GPIO_PIN[GPIO_V_CTL2]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIO_PORT[GPIO_V_CTL2], &GPIO_InitStruct); + HAL_GPIO_WritePin(GPIO_PORT[GPIO_V_CTL2], GPIO_PIN[GPIO_V_CTL2], GPIO_PIN_RESET); + + /* Start conversion */ + if (HAL_ADC_Start(&hadc) != HAL_OK) + { + error++; + } + + /* Wait for conversion completion */ + if (HAL_ADC_PollForConversion(&hadc, 10) != HAL_OK) + { + error++; + } + + /* Translate ADC conversion into voltage level */ + *voltageDCDCOff = __HAL_ADC_CALC_DATA_TO_VOLTAGE(VREFANALOG_VOLTAGE, + HAL_ADC_GetValue(&hadc), + hadc.Init.Resolution); + /* stop conversion */ + if (HAL_ADC_Stop(&hadc) != HAL_OK) + { + error++; + } + + /* Initialise DCDC_EN = 1 */ + HAL_GPIO_DeInit(GPIO_PORT[GPIO_V_CTL2], GPIO_PIN[GPIO_V_CTL2]); + GPIO_InitStruct.Pin = GPIO_PIN[GPIO_V_CTL2]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIO_PORT[GPIO_V_CTL2], &GPIO_InitStruct); + HAL_GPIO_WritePin(GPIO_PORT[GPIO_V_CTL2], GPIO_PIN[GPIO_V_CTL2], GPIO_PIN_SET); + + HAL_GPIO_DeInit(GPIO_PORT[GPIO_V_CTL1], GPIO_PIN[GPIO_V_CTL1]); + GPIO_InitStruct.Pin = GPIO_PIN[GPIO_V_CTL1]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIO_PORT[GPIO_V_CTL1], &GPIO_InitStruct); + HAL_GPIO_WritePin(GPIO_PORT[GPIO_V_CTL1], GPIO_PIN[GPIO_V_CTL1], GPIO_PIN_RESET); + + /* Start conversion */ + if (HAL_ADC_Start(&hadc) != HAL_OK) + { + error++; + } + + /* Wait for conversion completion */ + if (HAL_ADC_PollForConversion(&hadc, 10) != HAL_OK) + { + error++; + } + + /* Translate ADC conversion into voltage level */ + *voltageDCDCOnT0 = __HAL_ADC_CALC_DATA_TO_VOLTAGE(VREFANALOG_VOLTAGE, + HAL_ADC_GetValue(&hadc), + hadc.Init.Resolution); + + /* Start conversion */ + if (HAL_ADC_Stop(&hadc) != HAL_OK) + { + error++; + } + + HAL_Delay(100); + + /* Start conversion */ + if (HAL_ADC_Start(&hadc) != HAL_OK) + { + error++; + } + + /* Wait for conversion completion */ + if (HAL_ADC_PollForConversion(&hadc, 10) != HAL_OK) + { + error++; + } + + /* Translate ADC conversion into voltage level */ + *voltageDCDCOnT10 = __HAL_ADC_CALC_DATA_TO_VOLTAGE(VREFANALOG_VOLTAGE, + HAL_ADC_GetValue(&hadc), + hadc.Init.Resolution); + + /* Uninit GPIO PIN */ + HAL_GPIO_DeInit(GPIO_PORT[GPIO_V_CTL2], GPIO_PIN[GPIO_V_CTL2]); + HAL_GPIO_DeInit(GPIO_PORT[GPIO_V_CTL1], GPIO_PIN[GPIO_V_CTL1]); + + /* De-initialize ADC& */ + HAL_ADC_DeInit(&hadc); + + /* Un-register ADC MSP callback functions */ + if ((HAL_ADC_UnRegisterCallback(&hadc, HAL_ADC_MSPINIT_CB_ID) != HAL_OK) + || (HAL_ADC_UnRegisterCallback(&hadc, HAL_ADC_MSPDEINIT_CB_ID) != HAL_OK) + || (HAL_ADC_UnRegisterCallback(&hadc, HAL_ADC_CONVERSION_COMPLETE_CB_ID) != HAL_OK)) + { + /* MSP callback function registration Error */ + error++; + } + + /* Disable ADC clock */ + DB_ADC_CLK_DISABLE(); + + /* Reset GPIO configuration */ + HAL_GPIO_DeInit(DB_DETECT_GPIO_PORT, gpio_config.Pin); +} + +/** + * @brief Initialize the hardware resources used by the Type-C power delivery (PD) + * controller. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSInit(uint32_t Instance) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSInit(Instance)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Release the hardware resources used by the Type-C power delivery (PD) + * controller. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSDeInit(uint32_t Instance) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSDeInit(Instance)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Enable power supply over VBUS. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSOn(uint32_t Instance) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSOn(Instance)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Disable power supply over VBUS. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSOff(uint32_t Instance) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSOff(Instance)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Set a fixed/variable PDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @param VbusTargetInmv the vbus Target (in mV) + * @param OperatingCurrent the Operating Current (in mA) + * @param MaxOperatingCurrent the Max Operating Current (in mA) + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Fixed(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_Fixed(Instance, VbusTargetInmv, OperatingCurrent, MaxOperatingCurrent)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Set a fixed/variable PDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @param VbusTargetMinInmv the vbus Target min (in mV) + * @param VbusTargetMaxInmv the vbus Target max (in mV) + * @param OperatingCurrent the Operating Current (in mA) + * @param MaxOperatingCurrent the Max Operating Current (in mA) + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Variable(uint32_t Instance, + uint32_t VbusTargetMinInmv, + uint32_t VbusTargetMaxInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_Variable(Instance, VbusTargetMinInmv, VbusTargetMaxInmv, OperatingCurrent, MaxOperatingCurrent)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Set a Battery PDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @param VbusTargetMin the vbus Target min (in mV) + * @param VbusTargetMax the vbus Target max (in mV) + * @param OperatingPower the Operating Power (in mW) + * @param MaxOperatingPower the Max Operating Power (in mW) + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Battery(uint32_t Instance, + uint32_t VbusTargetMin, + uint32_t VbusTargetMax, + uint32_t OperatingPower, + uint32_t MaxOperatingPower) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_Battery(Instance, VbusTargetMin, VbusTargetMax, OperatingPower, MaxOperatingPower)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Set a APDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @param VbusTargetInmv the vbus Target (in mV) + * @param OperatingCurrent the Operating current (in mA) + * @param Delta Delta between with previous APDO (in mV), 0 means APDO start + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_APDO(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + int32_t Delta) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_APDO(Instance, VbusTargetInmv, OperatingCurrent, Delta)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Get actual voltage level measured on the VBUS line. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @retval Voltage measured voltage level (in mV) + */ +uint32_t BSP_PWR_VBUSGetVoltage(uint32_t Instance) +{ + uint32_t voltage = 0; + + (void)BSP_USBPD_PWR_VBUSGetVoltage(Instance, &voltage); + + return voltage; +} + +/** + * @brief Get actual current level measured on the VBUS line. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @retval Current measured current level (in mA) + */ +int32_t BSP_PWR_VBUSGetCurrent(uint32_t Instance) +{ + int32_t current = 0; + + (void)BSP_USBPD_PWR_VBUSGetCurrent(Instance, ¤t); + + return current; +} + +/** + * @brief Initialize VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_CC1 + * @arg TYPE_C_CC2 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VCONNInit(uint32_t Instance, + uint32_t CCPinId) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNInit(Instance, CCPinId)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Un-Initialize VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_CC1 + * @arg TYPE_C_CC2 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VCONNDeInit(uint32_t Instance, + uint32_t CCPinId) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNDeInit(Instance, CCPinId)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Enable VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_CC1 + * @arg TYPE_C_CC2 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VCONNOn(uint32_t Instance, + uint32_t CCPinId) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNOn(Instance, CCPinId)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Disable VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @param CCPinId CC pin identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_CC1 + * @arg TYPE_C_CC2 + * @retval PD controller status + */ +PWR_StatusTypeDef BSP_PWR_VCONNOff(uint32_t Instance, + uint32_t CCPinId) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNOff(Instance, CCPinId)) ? PWR_OK : PWR_ERROR); +} + +/** + * @brief Set the VBUS disconnection voltage threshold. + * @note Callback funtion registered through BSP_PWR_RegisterVBUSDetectCallback + * function call is invoked when VBUS falls below programmed threshold. + * @note By default VBUS disconnection threshold is set to 3.3V + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @param VoltageThreshold: VBUS disconnection voltage threshold (in mV) + * @retval PD controller status + */ +void BSP_PWR_SetVBUSDisconnectionThreshold(uint32_t Instance, + uint32_t VoltageThreshold) +{ + (void)BSP_USBPD_PWR_SetVBUSDisconnectionThreshold(Instance, VoltageThreshold); + return; +} + +/** + * @brief Register USB Type-C Current callback function. + * @note Callback function invoked when VBUS rises above 4V (VBUS present) or + * when VBUS falls below programmed threshold (VBUS absent). + * @note Callback funtion is un-registered when callback function pointer + * argument is NULL. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @arg TYPE_C_PORT_2 + * @param pfnVBUSDetectCallback callback function pointer + * @retval 0 success else fail + */ +PWR_StatusTypeDef BSP_PWR_RegisterVBUSDetectCallback(uint32_t Instance, + PWR_VBUSDetectCallbackFunc * pfnVBUSDetectCallback) +{ + return ((BSP_ERROR_NONE == BSP_USBPD_PWR_RegisterVBUSDetectCallback(Instance, (USBPD_PWR_VBUSDetectCallbackFunc*)pfnVBUSDetectCallback)) ? PWR_OK : PWR_ERROR); +} + + +/** + * @brief Get actual VBUS status. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @retval VBUS status (1: On, 0: Off) + */ +uint8_t BSP_PWR_VBUSIsOn(uint32_t Instance) +{ + uint8_t state = 0; + + BSP_USBPD_PWR_VBUSIsOn(Instance, &state); + + return state; +} + +/** + * @brief Get actual VCONN status. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_CC1 + * @arg TYPE_C_CC2 + * @retval VCONN status (1: On, 0: Off) + */ +uint8_t BSP_PWR_VCONNIsOn(uint32_t Instance, + uint32_t CCPinId) +{ + uint8_t state = 0; + + BSP_USBPD_PWR_VCONNIsOn(Instance, CCPinId, &state); + + return state; +} + +/** + * @brief Get actual DCDC voltage level. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @retval DCDC voltage level (in mV) + */ +uint32_t BSP_PWR_DCDCGetVoltage(uint32_t Instance) +{ + uint32_t voltage = 0; + + /* DCDC measure is possible only if the port operates as a source */ + if (Context.PortInfo[Instance].Role != POWER_ROLE_SINK) + { + /* Pause VBUS sensing */ + PWR_PauseVBusSensing(); + + /* Configure the ADC channel used to sense DCDC voltage */ + if (PWR_ADC_SetChannelConfig(ADC_VSENSE_DCDC) == 0) + { + /* Start conversion */ + if (HAL_ADC_Start(&hadc1) != HAL_OK) + { + goto end_of_DCDC_voltage_measure; + } + + /* Wait for conversion completion */ + if (HAL_ADC_PollForConversion(&hadc1, 10) != HAL_OK) + { + goto end_of_DCDC_voltage_measure; + } + + /* Translate ADC conversion into voltage level */ + voltage = PWR_ConvertADCDataToVoltage(HAL_ADC_GetValue(&hadc1)); + + /* Stop conversion */ + if (HAL_ADC_Stop(&hadc1) != HAL_OK) + { + goto end_of_DCDC_voltage_measure; + } + + /* Reset ADC channel configuration */ + PWR_ADC_ResetChannelConfig(ADC_VSENSE_DCDC); + } + + /* Resume VBUS senging */ + PWR_ResumeVBusSensing(); + } + +end_of_DCDC_voltage_measure: + return voltage; +} + +/** + * @brief Get DCDC control mode. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg TYPE_C_PORT_1 + * @retval DCDC control mode + * Returned value can take one of the following values: + * @arg DCDC_CTRL_MODE_UNKNOWN + * @arg DCDC_CTRL_MODE_GPIO + * @arg DCDC_CTRL_MODE_PWM + */ +PWR_DCDCCtrlModeTypeDef BSP_PWR_DCDCGetCtrlMode(uint32_t Instance) +{ + USBPD_PWR_DCDCCtrlModeTypeDef dcdc_ctrl = DCDC_CTRL_MODE_UNKNOWN; + + (void)BSP_USBPD_PWR_DCDCGetCtrlMode(Instance, &dcdc_ctrl); + + return (PWR_DCDCCtrlModeTypeDef)dcdc_ctrl; +} + +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_USBPD_POWER_Exported_Functions2 + * @{ + */ + +/** + * @brief Global initialization of PWR resource used by USB-PD + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_Init(uint32_t Instance) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_Init */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + return ret; + /* USER CODE END BSP_USBPD_PWR_Init */ +} + +/** + * @brief Global de-initialization of PWR resource used by USB-PD + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_Deinit(uint32_t Instance) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_Deinit */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + return ret; + /* USER CODE END BSP_USBPD_PWR_Deinit */ +} + +/** + * @brief Initialize the hardware resources used by the Type-C power delivery (PD) + * controller. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSInit(uint32_t Instance) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSInit */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + USBPD_PWR_PowerRoleTypeDef role; + + if (Context.PortInfo[Instance].State == PORT_NOT_INITIALIZED) + { + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + role = POWER_ROLE_DUAL; + PWR_GPIO_Init(GPIO_VCONN_EN1); + PWR_GPIO_Init(GPIO_VCONN_EN2); + } + else + { + role = POWER_ROLE_SINK; + } + + /* SINK / SOURCE initialization order is important: in case of dual role + SINK must be initialized before SOURCE. */ + if ((role == POWER_ROLE_SINK) || (role == POWER_ROLE_DUAL)) + { + if (0u == PWR_InitSink()) + { + if (Context.ADCRefCount == 1u) + { + if (0u != PWR_StartVBusSensing()) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + } + } + else + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + } + + if ((BSP_ERROR_NONE == ret) && + ((role == POWER_ROLE_SOURCE) || (role == POWER_ROLE_DUAL))) + { + if (0u != PWR_InitSource(Instance)) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + } + + /* Update PWR context */ + Context.PortInfo[Instance].State = PORT_INITIALIZED; + Context.PortInfo[Instance].Role = role; + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSInit */ +} + +/** + * @brief Release the hardware resources used by the Type-C power delivery (PD) + * controller. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSDeInit(uint32_t Instance) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSDeInit */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + if (Context.PortInfo[Instance].State == PORT_INITIALIZED) + { + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + PWR_GPIO_DeInit(GPIO_VCONN_EN1); + PWR_GPIO_DeInit(GPIO_VCONN_EN2); + } + + if ((Context.PortInfo[Instance].Role == POWER_ROLE_SOURCE) || + (Context.PortInfo[Instance].Role == POWER_ROLE_DUAL)) + { + if (0u != PWR_DeInitSource(Instance)) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + } + + if ((Context.PortInfo[Instance].Role == POWER_ROLE_SINK) || + (Context.PortInfo[Instance].Role == POWER_ROLE_DUAL)) + { + if (Context.ADCRefCount == 1u) + { + if (0u != PWR_StopVBusSensing()) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + } + if (BSP_ERROR_NONE == ret) + { + if (0u != PWR_DeInitSink()) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + } + } + + /* Update PWR context */ + Context.PortInfo[Instance].State = PORT_NOT_INITIALIZED; + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSDeInit */ +} + +/** + * @brief Enable power supply over VBUS. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSOn(uint32_t Instance) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSOn */ + /* Check if instance is valid */ + int32_t ret; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + /* Start VBUS Discharge */ + PWR_GPIO_On(GPIO_VBUS_DISCHARGE1); + + /* safety control to avoid spike when enabling the power */ + /* issue detected during board reset */ + uint32_t _tickstart = HAL_GetTick(); + uint32_t _dcdc; + uint32_t _delta = BSP_PWR_DCDCGetVoltage(Instance); + + do + { + _dcdc = BSP_PWR_DCDCGetVoltage(Instance); + + /* check after 2 second check if the power has start to decrease */ + if ((((HAL_GetTick() - _tickstart) > 2000u)) && ((_delta - _dcdc) < 500u)) + { +#if defined(_TRACE) + uint8_t _str[20]; + sprintf((char *)_str,"V:%ld-%ld", _dcdc, _delta); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, _str, strlen((char *)_str)); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, (uint8_t *) "V:decrease error", 16); +#endif + return BSP_ERROR_PERIPH_FAILURE; + } + + /* Timeout management */ + if ((HAL_GetTick() - _tickstart) > 15000u) + { +#if defined(_TRACE) + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, (uint8_t *) "V:timeout", 9); +#endif + return BSP_ERROR_PERIPH_FAILURE; + } + } + while (_dcdc > 5500u); + + /* Switch on VBUS */ + PWR_GPIO_On(GPIO_SOURCE_EN); + + /* Set VBUS to its default voltage level */ + ret = PWR_VBUSSetVoltage(Instance, VBUS_VOLTAGE_5V_IN_MV, 200u); /* 5% max = 250mV max */ + + /* Stop VBUS Discharge */ + PWR_GPIO_Off(GPIO_VBUS_DISCHARGE1); + } + else + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + + /* Save the power context */ + Context.PortInfo[Instance].VBUSVoltage = VBUS_VOLTAGE_5V_IN_MV; + Context.PortInfo[Instance].Type = POWER_FIXED; + + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSOn */ +} + +/** + * @brief Disable power supply over VBUS. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSOff(uint32_t Instance) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSOff */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + /* Go back to original VBUS value */ + ret = PWR_VBUSSetVoltage(0u, VBUS_VOLTAGE_0V_IN_MV, 0u); + + /* Discharge VBUS */ + PWR_VBUSDischarge(Instance, USBPD_PWR_LOW_VBUS_THRESHOLD, 0u, 0u); + } + + /* Save the power context */ + Context.PortInfo[Instance].VBUSVoltage = VBUS_VOLTAGE_0V_IN_MV; + Context.PortInfo[Instance].Type = POWER_NONE; + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSOff */ +} + +/** + * @brief Set a fixed/variable PDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param VbusTargetInmv the vbus Target (in mV) + * @param OperatingCurrent the Operating Current (in mA) + * @param MaxOperatingCurrent the Max Operating Current (in mA) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Fixed(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Fixed */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + UNUSED(MaxOperatingCurrent); + UNUSED(OperatingCurrent); + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + if (Context.PortInfo[Instance].VBUSVoltage != VbusTargetInmv) + { + /* Start VBUS Discharge, done to increase the decrease speed */ + PWR_GPIO_On(GPIO_VBUS_DISCHARGE1); + + /* Set the power, the precision must be at 5% */ + ret = PWR_VBUSSetVoltage(Instance, VbusTargetInmv, (uint16_t)(VbusTargetInmv * 5u / 100u)); + + /* Wait the power stabilization */ + PWR_GPIO_Off(GPIO_VBUS_DISCHARGE1); + } + + /* Upate the context */ + Context.PortInfo[Instance].VBUSVoltage = VbusTargetInmv; + Context.PortInfo[Instance].Type = POWER_FIXED; + + /* Set the current limitation */ + /* not implemented */ + + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_Fixed */ +} + +/** + * @brief Set a fixed/variable PDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param VbusTargetMinInmv the vbus Target min (in mV) + * @param VbusTargetMaxInmv the vbus Target max (in mV) + * @param OperatingCurrent the Operating Current (in mA) + * @param MaxOperatingCurrent the Max Operating Current (in mA) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Variable(uint32_t Instance, + uint32_t VbusTargetMinInmv, + uint32_t VbusTargetMaxInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Variable */ + /* Check if instance is valid */ + int32_t ret; + UNUSED(MaxOperatingCurrent); + UNUSED(OperatingCurrent); + UNUSED(VbusTargetMaxInmv); + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + uint32_t vbus_target_inmv = (VbusTargetMinInmv + VbusTargetMinInmv) / 2u; + + /* Set the power, the precision must be at 5% */ + ret = PWR_VBUSSetVoltage(Instance, vbus_target_inmv, (uint16_t)(vbus_target_inmv * 5u / 100u)); + + /* Set the current limitation */ + /* not implemented */ + + } + return ret; + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Variable */ +} + +/** + * @brief Set a Battery PDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param VbusTargetMin the vbus Target min (in mV) + * @param VbusTargetMax the vbus Target max (in mV) + * @param OperatingPower the Operating Power (in mW) + * @param MaxOperatingPower the Max Operating Power (in mW) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Battery(uint32_t Instance, + uint32_t VbusTargetMin, + uint32_t VbusTargetMax, + uint32_t OperatingPower, + uint32_t MaxOperatingPower) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Battery */ + /* Check if instance is valid */ + int32_t ret; + UNUSED(OperatingPower); + UNUSED(VbusTargetMax); + UNUSED(VbusTargetMin); + UNUSED(MaxOperatingPower); + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + /* Set the power, the precision must be at 5% */ + /* Set the current limitation */ + /* not implemented */ + + ret = BSP_ERROR_FEATURE_NOT_SUPPORTED; + } + return ret; + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Battery */ +} + +/** + * @brief Set a APDO and manage the power control. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param VbusTargetInmv the vbus Target (in mV) + * @param OperatingCurrent the Operating current (in mA) + * @param Delta Delta between with previous APDO (in mV), 0 means APDO start + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSSetVoltage_APDO(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + int32_t Delta) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_APDO */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + UNUSED(Delta); + UNUSED(OperatingCurrent); + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + /* set the new value with the current value */ + if (POWER_APDO != Context.PortInfo[Instance].Type) + { + switch (Context.PortInfo[Instance].VBUSVoltage) + { + case VBUS_VOLTAGE_0V_IN_MV : + case VBUS_VOLTAGE_5V_IN_MV : + aPWMDutyCycleLUT[VBUS_PPS_V] = aPWMDutyCycleLUT[VBUS_5_V]; + break; + case VBUS_VOLTAGE_9V_IN_MV : + aPWMDutyCycleLUT[VBUS_PPS_V] = aPWMDutyCycleLUT[VBUS_9_V]; + break; + case VBUS_VOLTAGE_15V_IN_MV : + aPWMDutyCycleLUT[VBUS_PPS_V] = aPWMDutyCycleLUT[VBUS_15_V]; + break; + case VBUS_VOLTAGE_18V_IN_MV : + aPWMDutyCycleLUT[VBUS_PPS_V] = aPWMDutyCycleLUT[VBUS_18_V]; + break; + default: + break; + } + } + + if (Context.PortInfo[Instance].VBUSVoltage != VbusTargetInmv) + { + /* Start VBUS Discharge, done to increase the decrease speed */ + PWR_GPIO_On(GPIO_VBUS_DISCHARGE1); + + ret = PWR_VBUSSetVoltage(Instance, VbusTargetInmv, USBPD_PWR_DCDC_PRECISION); + /* Wait the power stabilization */ + PWR_GPIO_Off(GPIO_VBUS_DISCHARGE1); + + /* Upate the context */ + Context.PortInfo[Instance].VBUSVoltage = VbusTargetInmv; + Context.PortInfo[Instance].Type = POWER_APDO; + } + + /* Set the current limitation */ + /* not implemented */ + } + return ret; + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_APDO */ +} + +/** + * @brief Get actual voltage level measured on the VBUS line. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param pVoltage Pointer on measured voltage level (in mV) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSGetVoltage(uint32_t Instance, uint32_t *pVoltage) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSGetVoltage */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pVoltage)) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + uint32_t voltage = 0u; + + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + voltage = PWR_ConvertADCDataToVoltage(aADCxConvertedValues[1u]); + } + else + { + if (Instance == USBPD_PWR_TYPE_C_PORT_2) + { + voltage = PWR_ConvertADCDataToVoltage(aADCxConvertedValues[0u]); + } + } + + *pVoltage = voltage; + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSGetVoltage */ +} + +/** + * @brief Get actual current level measured on the VBUS line. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param pCurrent Pointer on measured current level (in mA) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSGetCurrent(uint32_t Instance, int32_t *pCurrent) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSGetCurrent */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pCurrent)) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + int32_t current = 0; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + current = PWR_ConvertADCDataToCurrent(aADCxConvertedValues[2u]); + } + else + { + if (Instance == USBPD_PWR_TYPE_C_PORT_2) + { + current = PWR_ConvertADCDataToCurrent(aADCxConvertedValues[3u]); + } + } + + *pCurrent = current; + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSGetCurrent */ +} + +/** + * @brief Initialize VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_CC1 + * @arg @ref USBPD_PWR_TYPE_C_CC2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VCONNInit(uint32_t Instance, + uint32_t CCPinId) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VCONNInit */ + /* Check if instance is valid */ + int32_t ret; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + ret = BSP_ERROR_NO_INIT; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + switch (CCPinId) + { + case USBPD_PWR_TYPE_C_CC1 : + { + PWR_GPIO_Init(GPIO_VCONN_DISCHARGE1); + ret = BSP_ERROR_NONE; + break; + } + case USBPD_PWR_TYPE_C_CC2 : + { + PWR_GPIO_Init(GPIO_VCONN_DISCHARGE2); + ret = BSP_ERROR_NONE; + break; + } + default: + break; + } + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VCONNInit */ +} + +/** + * @brief Un-Initialize VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_CC1 + * @arg @ref USBPD_PWR_TYPE_C_CC2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VCONNDeInit(uint32_t Instance, + uint32_t CCPinId) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VCONNDeInit */ + /* Check if instance is valid */ + int32_t ret; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + ret = BSP_ERROR_NO_INIT; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + switch (CCPinId) + { + case USBPD_PWR_TYPE_C_CC1 : + { + PWR_GPIO_DeInit(GPIO_VCONN_DISCHARGE1); + ret = BSP_ERROR_NONE; + break; + } + case USBPD_PWR_TYPE_C_CC2 : + { + PWR_GPIO_DeInit(GPIO_VCONN_DISCHARGE2); + ret = BSP_ERROR_NONE; + break; + } + default: + break; + } + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VCONNDeInit */ +} + +/** + * @brief Enable VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_CC1 + * @arg @ref USBPD_PWR_TYPE_C_CC2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VCONNOn(uint32_t Instance, + uint32_t CCPinId) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VCONNOn */ + /* Check if instance is valid */ + int32_t ret; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + ret = BSP_ERROR_PERIPH_FAILURE; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + if (CCPinId == USBPD_PWR_TYPE_C_CC1) + { + PWR_GPIO_On(GPIO_VCONN_EN1); + ret = BSP_ERROR_NONE; + } + else + { + if (CCPinId == USBPD_PWR_TYPE_C_CC2) + { + PWR_GPIO_On(GPIO_VCONN_EN2); + ret = BSP_ERROR_NONE; + } + } + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VCONNOn */ +} + +/** + * @brief Disable VCONN sourcing. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param CCPinId CC pin identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_CC1 + * @arg @ref USBPD_PWR_TYPE_C_CC2 + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VCONNOff(uint32_t Instance, + uint32_t CCPinId) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VCONNOff */ + /* Check if instance is valid */ + int32_t ret; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + ret = BSP_ERROR_PERIPH_FAILURE; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + if (CCPinId == USBPD_PWR_TYPE_C_CC1) + { + /* switch off Vconn */ + PWR_GPIO_Off(GPIO_VCONN_EN1); + PWR_GPIO_On(GPIO_VCONN_EN1); + PWR_GPIO_Off(GPIO_VCONN_EN1); + + /* Dicharge VCONN */ + PWR_GPIO_On(GPIO_VCONN_DISCHARGE1); + HAL_Delay(1u); + PWR_GPIO_Off(GPIO_VCONN_DISCHARGE1); + ret = BSP_ERROR_NONE; + } + else + { + if (CCPinId == USBPD_PWR_TYPE_C_CC2) + { + /* switch off Vconn */ + PWR_GPIO_Off(GPIO_VCONN_EN2); + PWR_GPIO_On(GPIO_VCONN_EN2); + PWR_GPIO_Off(GPIO_VCONN_EN2); + + /* Dicharge VCONN */ + PWR_GPIO_On(GPIO_VCONN_DISCHARGE2); + HAL_Delay(1u); + PWR_GPIO_Off(GPIO_VCONN_DISCHARGE2); + ret = BSP_ERROR_NONE; + } + } + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VCONNOff */ +} + +/** + * @brief Get actual VCONN status. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param CCPinId Type-C CC pin identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_CC1 + * @arg @ref USBPD_PWR_TYPE_C_CC2 + * @param pState VCONN status (1: On, 0: Off) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VCONNIsOn(uint32_t Instance, + uint32_t CCPinId, uint8_t *pState) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VCONNIsOn */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pState)) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + GPIO_Id_TypeDef gpio; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + if (CCPinId == USBPD_PWR_TYPE_C_CC1) + { + gpio = GPIO_VCONN_EN1; + } + else + { + gpio = GPIO_VCONN_EN2; + } + ((READ_BIT(GPIO_PORT[gpio]->ODR, GPIO_PIN[gpio]) == GPIO_PIN[gpio]) ? (*pState = 1u) : (*pState = 0u)); + } + else + { + ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;; + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VCONNIsOn */ +} + +/** + * @brief Set the VBUS disconnection voltage threshold. + * @note Callback funtion registered through BSP_USBPD_PWR_RegisterVBUSDetectCallback + * function call is invoked when VBUS falls below programmed threshold. + * @note By default VBUS disconnection threshold is set to 3.3V + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param VoltageThreshold VBUS disconnection voltage threshold (in mV) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_SetVBUSDisconnectionThreshold(uint32_t Instance, + uint32_t VoltageThreshold) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_SetVBUSDisconnectionThreshold */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + /* Update PWR context */ + if (VoltageThreshold <= VBUS_CONNECTION_THRESHOLD) + { + Context.PortInfo[Instance].VBUSDisconnectionThreshold = VoltageThreshold; + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_SetVBUSDisconnectionThreshold */ +} + +/** + * @brief Register USB Type-C Current callback function. + * @note Callback function invoked when VBUS rises above 4V (VBUS present) or + * when VBUS falls below programmed threshold (VBUS absent). + * @note Callback funtion is un-registered when callback function pointer + * argument is NULL. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param pfnVBUSDetectCallback callback function pointer + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_RegisterVBUSDetectCallback(uint32_t Instance, + USBPD_PWR_VBUSDetectCallbackFunc *pfnVBUSDetectCallback) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_RegisterVBUSDetectCallback */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pfnVBUSDetectCallback)) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + ADC_AnalogWDGConfTypeDef adc_awd_config; + + /* Configure analog watchdow */ + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + adc_awd_config.WatchdogNumber = ADC_ANALOGWATCHDOG_1; + adc_awd_config.Channel = ADCx_CHANNEL_VSENSE_1; + } + else + { + adc_awd_config.WatchdogNumber = ADC_ANALOGWATCHDOG_2; + adc_awd_config.Channel = ADCx_CHANNEL_VSENSE_2; + } + /* Update PWR context */ + Context.PortInfo[Instance].pfnVBUSDetectCallback = pfnVBUSDetectCallback; + + if (pfnVBUSDetectCallback == NULL) + { + adc_awd_config.WatchdogMode = ADC_ANALOGWATCHDOG_NONE; + adc_awd_config.ITMode = DISABLE; + adc_awd_config.HighThreshold = 0xFFF; + adc_awd_config.LowThreshold = 0u; + } + else + { + adc_awd_config.WatchdogMode = ADC_ANALOGWATCHDOG_SINGLE_REG; + adc_awd_config.ITMode = ENABLE; + adc_awd_config.HighThreshold = PWR_ConvertVoltageToThreshold(VBUS_CONNECTION_THRESHOLD); + adc_awd_config.LowThreshold = 0u; + } + + /* Stop on-going conversions */ + if (HAL_ADC_Stop_DMA(&hadc1) != HAL_OK) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + else + { + /* Set AWD configuration */ + if (HAL_ADC_AnalogWDGConfig(&hadc1, &adc_awd_config) != HAL_OK) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + else + { + /* Resume conversions */ + if (HAL_ADC_Start_DMA(&hadc1, (uint32_t *)aADCxConvertedValues, 4u) != HAL_OK) + { + ret = BSP_ERROR_PERIPH_FAILURE; + } + } + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_RegisterVBUSDetectCallback */ +} + +/** + * @brief Get actual VBUS status. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param pState VBUS status (1: On, 0: Off) + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_VBUSIsOn(uint32_t Instance, uint8_t *pState) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_VBUSIsOn */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if (Instance >= USBPD_PWR_INSTANCES_NBR) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + *pState = ((READ_BIT(GPIO_PORT[GPIO_SOURCE_EN]->ODR, GPIO_PIN[GPIO_SOURCE_EN]) == GPIO_PIN[GPIO_SOURCE_EN]) ? 1u : 0u); + } + else + { + ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;; + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_VBUSIsOn */ +} + +/** + * @brief Get DCDC control mode. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param pDCDCCtrl Pointer on DCDC control mode + * Returned value can take one of the following values: + * @arg @ref DCDC_CTRL_MODE_UNKNOWN + * @arg @ref DCDC_CTRL_MODE_GPIO + * @arg @ref DCDC_CTRL_MODE_PWM + * @retval BSP status + */ +int32_t BSP_USBPD_PWR_DCDCGetCtrlMode(uint32_t Instance, USBPD_PWR_DCDCCtrlModeTypeDef *pDCDCCtrl) +{ + /* USER CODE BEGIN BSP_USBPD_PWR_DCDCGetCtrlMode */ + /* Check if instance is valid */ + int32_t ret = BSP_ERROR_NONE; + + if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pDCDCCtrl)) + { + ret = BSP_ERROR_WRONG_PARAM; + } + else + { + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + *pDCDCCtrl = Context.DCDCCtrlMode; + } + } + return ret; + /* USER CODE END BSP_USBPD_PWR_DCDCGetCtrlMode */ +} + +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_POWER_Private_Functions + * @{ + */ + +/* USER CODE BEGIN POWER_Private_Functions */ +/** + * @brief Initialize the hardware resources used by a port acting as a source. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 +* @retval 0 success else fail + */ +static uint8_t PWR_InitSource(uint32_t Instance) +{ + uint8_t ret; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + /* Initialize the Type-C port 1 related GPIOs */ + PWR_GPIO_Init(GPIO_VBUS_DISCHARGE1); + PWR_GPIO_Init(GPIO_SOURCE_EN); + ret = PWR_InitPowerSource(); + PWR_GPIO_Init(GPIO_V_CTL2); + + if (ret == 0u) + { + /* Pre-charge C57 to avoid a high voltage overshoot on VSOURCE when DCDC is enabled. */ + PWR_DCDCPreChargeC57(USBPD_PWR_TYPE_C_PORT_1); + + /* Determine DCDC voltage control mode (GPIO or PWM) */ + Context.DCDCCtrlMode = DCDC_CTRL_MODE_PWM; + } + return ret; + } + else + { + return 1u; + } +} + +/** + * @brief Release the hardware resources used by a port acting as a source. + * @param Instance Type-C port identifier + * This parameter can take following value: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 +* @retval 0 success else fail + */ +static uint8_t PWR_DeInitSource(uint32_t Instance) +{ + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + /* De-initialize the Type-C port 1 related GPIOs */ + PWR_DeInitPowerSource(); + PWR_GPIO_DeInit(GPIO_V_CTL2); + PWR_GPIO_DeInit(GPIO_SOURCE_EN); + PWR_GPIO_DeInit(GPIO_VBUS_DISCHARGE1); + + return 0; + } + else + { + return 1u; + } +} + +/** + * @brief Initialize the hardware resources used by a port acting as a sink. + * @retval 0 success else fail + */ +static uint8_t PWR_InitSink(void) +{ + uint8_t ret = 0u; + + ret += PWR_ADC_SetConfig(); + + Context.ADCRefCount++; + + return ret; +} + +/** + * @brief Release the hardware resources used by a port acting as a sink. +* @retval 0 success else fail + */ +static uint8_t PWR_DeInitSink(void) +{ + uint8_t ret = 0u; + + Context.ADCRefCount--; + + PWR_ADC_ResetConfig(); + + return ret; +} + + +/** +* @brief Configures GPIO. +* @param gpio Specifies the GPIO Pin to be configured. +* This parameter can be one of following parameters: +* @arg @ref GPIO_SOURCE_EN +* @arg @ref GPIO_VBUS_DISCHARGE1 +* @arg @ref GPIO_VBUS_DISCHARGE2 +* @arg @ref GPIO_VCONN_EN1 +* @arg @ref GPIO_VCONN_EN2 +* @arg @ref GPIO_VCONN_DISCHARGE1 +* @arg @ref GPIO_VCONN_DISCHARGE2 +* @arg @ref GPIO_V_CTL2 +* @arg @ref GPIO_V_CTL1 +* @retval None +*/ +static void PWR_GPIO_Init(GPIO_Id_TypeDef gpio) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Enable the GPIO clock */ + GPIOx_CLK_ENABLE(gpio); + + /* Configure the GPIO pin */ + switch (gpio) + { + case GPIO_SOURCE_EN: + case GPIO_VBUS_DISCHARGE1: + case GPIO_VBUS_DISCHARGE2: + GPIO_InitStruct.Pin = GPIO_PIN[gpio]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + + HAL_GPIO_Init(GPIO_PORT[gpio], &GPIO_InitStruct); + + /* Set GPIO to inactive state */ + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_RESET); + break; + + case GPIO_VCONN_EN1: + case GPIO_VCONN_EN2: + case GPIO_V_CTL2: + case GPIO_V_CTL1: + GPIO_InitStruct.Pin = GPIO_PIN[gpio]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + + HAL_GPIO_Init(GPIO_PORT[gpio], &GPIO_InitStruct); + + if(gpio == GPIO_V_CTL2) + { + /* Disable DCDC */ + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_RESET); + } + else + { + /* Set GPIO to inactive state (High level is HI-Z) */ + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_SET); + } + break; + + case GPIO_VCONN_DISCHARGE1: + case GPIO_VCONN_DISCHARGE2: + GPIO_InitStruct.Pin = GPIO_PIN[gpio]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + + HAL_GPIO_Init(GPIO_PORT[gpio], &GPIO_InitStruct); + + /* Set GPIO to inactive state */ + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_RESET); + break; + default: + break; + } +} + +/** + * @brief Reset GPIO configuration. + * @param gpio Specifies the GPIO Pin . + * This parameter can be one of following parameters: + * @arg @ref GPIO_SOURCE_EN + * @arg @ref GPIO_VBUS_DISCHARGE1 + * @arg @ref GPIO_VBUS_DISCHARGE2 + * @arg @ref GPIO_VCONN_EN1 + * @arg @ref GPIO_VCONN_EN2 + * @arg @ref GPIO_VCONN_DISCHARGE1 + * @arg @ref GPIO_VCONN_DISCHARGE2 + * @arg @ref GPIO_V_CTL2 + * @arg @ref GPIO_V_CTL1 + * @retval None + */ +static void PWR_GPIO_DeInit(GPIO_Id_TypeDef gpio) +{ + HAL_GPIO_DeInit(GPIO_PORT[gpio], GPIO_PIN[gpio]); +} + +/** +* @brief Turns selected GPIO On. +* @param gpio Specifies the GPIO Pin to be configured. +* This parameter can be one of following parameters: +* @arg @ref GPIO_SOURCE_EN +* @arg @ref GPIO_VBUS_DISCHARGE1 +* @arg @ref GPIO_VBUS_DISCHARGE2 +* @arg @ref GPIO_VCONN_EN1 +* @arg @ref GPIO_VCONN_EN2 +* @arg @ref GPIO_VCONN_DISCHARGE1 +* @arg @ref GPIO_VCONN_DISCHARGE2 +* @arg @ref GPIO_V_CTL2 +* @arg @ref GPIO_V_CTL1 +* @retval None +*/ +static void PWR_GPIO_On(GPIO_Id_TypeDef gpio) +{ + /* Update GPIO pin state */ + if ((gpio == GPIO_VCONN_EN1) || + (gpio == GPIO_VCONN_EN2) || + (gpio == GPIO_V_CTL1) || + (gpio == GPIO_V_CTL2)) +{ + if (gpio == GPIO_V_CTL2) + { + GPIO_InitTypeDef GPIO_InitStruct; + + PWR_GPIO_DeInit(GPIO_V_CTL2); + + GPIO_InitStruct.Pin = GPIO_PIN[gpio]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIO_PORT[gpio], &GPIO_InitStruct); + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_SET); + } + else + { + /* In open-drain mode only the low level is driven (high level is HI-Z) */ + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_RESET); + } + } + else + { + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_SET); + } +} + +/** +* @brief Turns selected GPIO Off. +* @param gpio Specifies the GPIO Pin to be configured. +* This parameter can be one of following parameters: +* @arg @ref GPIO_SOURCE_EN +* @arg @ref GPIO_VBUS_DISCHARGE1 +* @arg @ref GPIO_VBUS_DISCHARGE2 +* @arg @ref GPIO_VCONN_EN1 +* @arg @ref GPIO_VCONN_EN2 +* @arg @ref GPIO_VCONN_DISCHARGE1 +* @arg @ref GPIO_VCONN_DISCHARGE2 +* @arg @ref GPIO_V_CTL2 +* @arg @ref GPIO_V_CTL1 +* @retval None +*/ +static void PWR_GPIO_Off(GPIO_Id_TypeDef gpio) +{ + /* Update GPIO pin state */ + if ((gpio == GPIO_VCONN_EN1) || + (gpio == GPIO_VCONN_EN2) || + (gpio == GPIO_V_CTL1) || + (gpio == GPIO_V_CTL2)) +{ + if (gpio == GPIO_V_CTL2) + { + GPIO_InitTypeDef GPIO_InitStruct; + + PWR_GPIO_DeInit(GPIO_V_CTL2); + + GPIO_InitStruct.Pin = GPIO_PIN[gpio]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIO_PORT[gpio], &GPIO_InitStruct); + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_RESET); + } + else + { + /* Set GPIO to inactive state (High level is HI-Z) */ + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_SET); + } + } + else + { + HAL_GPIO_WritePin(GPIO_PORT[gpio], GPIO_PIN[gpio], GPIO_PIN_RESET); + } +} + +/** +* @brief Set ADC configuration. +* @retval 0 success else fail +*/ +static uint8_t PWR_ADC_SetConfig(void) +{ + uint8_t ret = 0u; + + /* Initialize ADC (if not already used) */ + if (Context.ADCRefCount == 0u) + { + __HAL_ADC_RESET_HANDLE_STATE(&hadc1); + + /* Register ADC MSP callback functions */ + if (HAL_ADC_RegisterCallback(&hadc1, HAL_ADC_MSPINIT_CB_ID, PWR_ADC_MspInit) != HAL_OK) ret++; + if (HAL_ADC_RegisterCallback(&hadc1, HAL_ADC_MSPDEINIT_CB_ID, PWR_ADC_MspDeInit) != HAL_OK) ret++; + + /* Configuration of hadc1 init structure: ADC parameters and regular group */ + hadc1.Instance = ADCx; + + hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4; + hadc1.Init.Resolution = ADC_RESOLUTION_12B; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc1.Init.LowPowerAutoWait = DISABLE; + hadc1.Init.LowPowerAutoPowerOff = DISABLE; + hadc1.Init.ContinuousConvMode = ENABLE; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; + hadc1.Init.DMAContinuousRequests = ENABLE; + hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; + hadc1.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_39CYCLES_5; + hadc1.Init.OversamplingMode = DISABLE; + + if (HAL_ADC_Init(&hadc1) != HAL_OK) + { + ret++; + } + + /* Register ADC conversion complete callback function */ + if (HAL_ADC_RegisterCallback(&hadc1, HAL_ADC_CONVERSION_COMPLETE_CB_ID, PWR_ADC_ConvCpltCallback) != HAL_OK) ret++; + + /* Run the ADC calibration */ + if (HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK) + { + ret++; + } + + /* Configure the ADC channel used to sense VBUS1 voltage */ + ret += PWR_ADC_SetChannelConfig(ADC_VSENSE_1); + + /* Configure the ADC channel used to sense VBUS1 current */ + ret += PWR_ADC_SetChannelConfig(ADC_ISENSE_1); + + /* Configure the ADC channel used to sense VBUS2 voltage */ + ret += PWR_ADC_SetChannelConfig(ADC_VSENSE_2); + + /* Configure the ADC channel used to sense VBUS2 current */ + ret += PWR_ADC_SetChannelConfig(ADC_ISENSE_2); + } + + return ret; +} + +/** +* @brief Reset ADC configuration. +* @retval None +*/ +static void PWR_ADC_ResetConfig(void) +{ + /* Stop conversion and de-initialize ADC (if not used any more ) */ + if (Context.ADCRefCount == 0u) + { + /* Stop ADCx conversions */ + (void)HAL_ADC_Stop_DMA(&hadc1); + + /* Reset ADC channel configuration */ + PWR_ADC_ResetChannelConfig(ADC_VSENSE_1); + PWR_ADC_ResetChannelConfig(ADC_ISENSE_1); + PWR_ADC_ResetChannelConfig(ADC_VSENSE_2); + PWR_ADC_ResetChannelConfig(ADC_ISENSE_2); + + /* De-initialize ADCx */ + (void)HAL_ADC_DeInit(&hadc1); + + /* Un-register ADC MSP callback functions */ + HAL_ADC_UnRegisterCallback(&hadc1, HAL_ADC_MSPINIT_CB_ID); + HAL_ADC_UnRegisterCallback(&hadc1, HAL_ADC_MSPDEINIT_CB_ID); + HAL_ADC_UnRegisterCallback(&hadc1, HAL_ADC_CONVERSION_COMPLETE_CB_ID); + } +} + +/** +* @brief Set ADC channel configuration. +* @param ADCChannel Specifies the ADC channel +* @arg @ref ADC_VSENSE_1 +* @arg @ref ADC_VSENSE_2 +* @arg @ref ADC_ISENSE_1 +* @arg @ref ADC_ISENSE_2 +* @arg @ref ADC_VSENSE_DCDC (MB1352C only) +* @retval 0 success else fail +*/ +static uint8_t PWR_ADC_SetChannelConfig(ADC_ChannelId_TypeDef ADCChannel) +{ + /* V/I Sense / ADC Channel cross table */ + static const uint32_t ADC_CHANNEL[ADCxChanneln] = + { + ADCx_CHANNEL_VSENSE_1, + ADCx_CHANNEL_ISENSE_1, + ADCx_CHANNEL_VSENSE_2, + ADCx_CHANNEL_ISENSE_2, + ADCx_CHANNEL_VSENSE_DCDC + }; + + uint8_t ret = 0u; + GPIO_InitTypeDef gpio_config = {0u}; + ADC_ChannelConfTypeDef adc_channel_config = {0u}; + + /* Enable GPIO clock */ + ADCx_CHANNEL_GPIO_CLK_ENABLE(ADC_CHANNEL[ADCChannel]); + + /* Configure GPIO pin of the selected ADC channel */ + gpio_config.Pin = ADC_CHANNEL_PIN[ADCChannel]; + gpio_config.Mode = GPIO_MODE_ANALOG; + gpio_config.Pull = GPIO_NOPULL; + HAL_GPIO_Init(ADC_CHANNEL_PORT[ADCChannel], &gpio_config); + + /* Configure the ADC channel */ + adc_channel_config.Channel = ADC_CHANNEL[ADCChannel]; + adc_channel_config.Rank = ADC_RANK_CHANNEL_NUMBER; + adc_channel_config.SamplingTime = ADC_SAMPLINGTIME_COMMON_1; + + if (HAL_ADC_ConfigChannel(&hadc1, &adc_channel_config) != HAL_OK) + { + ret++; + } + + return ret; +} + +/** +* @brief Reset ADC channel configuration. +* @param ADCChannel Specifies the ADC channel +* @arg @ref ADC_VSENSE_1 +* @arg @ref ADC_VSENSE_2 +* @arg @ref ADC_ISENSE_1 +* @arg @ref ADC_ISENSE_2 +* @arg @ref ADC_VSENSE_DCDC (MB1352C only) +* @retval None +*/ +static void PWR_ADC_ResetChannelConfig(ADC_ChannelId_TypeDef ADCChannel) +{ + /* Reset GPIO configuration */ + HAL_GPIO_DeInit(ADC_CHANNEL_PORT[ADCChannel], ADC_CHANNEL_PIN[ADCChannel]); +} + +/** + * @brief Calculate the VBUS voltage level corresponding to ADC raw converted data. + * @note Voltage level is measured though a voltage divider + * + * Voltage -- Ra ----.- ^ + * | | + * Rb | vadc = VBUS * Rb /(Ra + Rb) + * | | + * GND | + * vadc = raw_data * (ADC_FULL_SCALE / VDD) + * Ra = 330 kOhms + * Rb = 49.9 kOhms + * @param ADCData ADC raw converted data (resolution 12 bits) + * @retval analog voltage (unit: mV) + */ +static uint32_t PWR_ConvertADCDataToVoltage(uint32_t ADCData) +{ + uint32_t voltage; + uint32_t vadc; + + vadc = (ADCData * VDD) / ADC_FULL_SCALE; + + voltage = vadc * (RA + RB) / RB; + + return voltage; +} + +/** + * @brief Calculate the analog watchdog threshold corresponding to a given VBUS voltage level. + * @note Voltage level is measured though a voltage divider + * + * VBUS ----- Ra ----.- ^ + * | | + * Rb | vadc = VBUS * Rb /(Ra + Rb) + * | | + * GND | + * vadc = Threshold * (ADC_FULL_SCALE / VDD) + * Ra = 330 kOhms + * Rb = 49.9 kOhms + * @param Voltage VBUS analog voltage (unit: mV) + * @retval analog watchdog threshold value + */ +static uint32_t PWR_ConvertVoltageToThreshold(uint32_t Voltage) +{ + uint32_t threshold; + uint32_t vadc; + + vadc = Voltage * RB/(RA + RB); + + threshold = vadc * ADC_FULL_SCALE / VDD; + + return threshold; +} + +/** + * @brief Calculate the VBUS current level corresponding to ADC raw converted data. + * @note Current level is measured though INA199x1 output voltage level. + * @note INA199x1 measures currents through a resistive shunt (0.005 Ohms) in + * two directions. + * @note VDD corresponds to the zero-input level state. The Vout responds + * by increasing above VDD for positive differential signals (relative + * to the IN– pin) and responds by decreasing below VDD for negative + * differential signals. + * + * VBUS -----. Rs .-.... + * | | .------------. + * | | | INA199x1 | + * | | | | + * | '--> IN+ > Vout (GAIN * Vs) + * | Vs ^ | | 0 <= Vout < VDD - negative current + * | | | | Vout = VDD - zero-input + * '-------> IN- | Vout > VDD - positive current + * | | + * Vref > | + * (Vdd/2) | | + * '------------' + * + * Is = Vout/(GAIN * Rs) = (Vout - 2*Vref)/(Gain * Rs) + * where Vout = ADCData * (VDD/ADC_FULL_SCALE) + * Is = (ADCData * Vdd)/(ADC_FULL_SCALE * Gain * Rs) - Vdd/(Gain * Rs) + * Vdd = 3300 mV, ADC_FULL_SCALE = 4095, Gain = 50, Rs = 5/1000 + * @param ADCData ADC raw converted data (resolution 12 bits) + * @retval VBUS analog current (unit: mA) + */ +static int32_t PWR_ConvertADCDataToCurrent(uint32_t ADCData) +{ + int32_t current; + + current = ((ADCData * VDD) >> 10u) - 6600u; + + return current; +} + +/** + * @brief Force the VBUS discharge. + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @param VbusStopInmV Low VBUS threshold (in mV) + * @param VbusErrorInmV VBUS margin (in mV) + * @param Delay Discharge delay (in ms) + * @retval None + */ + +static void PWR_VBUSDischarge(uint32_t Instance, + uint32_t VbusStopInmV, + uint32_t VbusErrorInmV, + uint16_t Delay) +{ + uint32_t vbus; + uint8_t vbus_disable = 0; + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + PWR_GPIO_On(GPIO_VBUS_DISCHARGE1); + /* Disable DCDC_EN bit*/ + PWR_GPIO_Off(GPIO_V_CTL2); + + /* Wait Tempo or Voltage level */ + if (Delay > 0u) + { + HAL_Delay(Delay); + } + else /* if (VbusErrorInmV > 0) */ + { + do + { + HAL_Delay(1u); + (void)BSP_USBPD_PWR_VBUSGetVoltage(Instance, &vbus); + if ((0u == vbus_disable) && (vbus < 5000u)) + { + /* Switch off VBUS */ + PWR_GPIO_Off(GPIO_SOURCE_EN); + vbus_disable = 1u; + } + } + while (vbus >= (VbusStopInmV + VbusErrorInmV)); + } + + /* Enable DCDC_EN bit*/ + PWR_GPIO_On(GPIO_V_CTL2); + PWR_GPIO_Off(GPIO_VBUS_DISCHARGE1); + /* Allow to restart with correct duty cycle */ + PWR_SetPWMDutyCycle(aPWMDutyCycleLUT[VBUS_5_V]); + } +} + +/** + * @brief Set VBUS voltage level + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @arg @ref USBPD_PWR_TYPE_C_PORT_2 + * @param VBusInmV VBUS voltage level setpoint(in mV) + * @param Precision Requested precision (in mV) + * @note Calibration and Precision paremeters aren't relevant when the VBUS + * voltage level isn't controlled by a PWM signal. + * @note When VBUS voltage level is controlled by a PWM signal, VBUS voltage is + * controlled by a PD (Proportional-Derivative) control loop. + * The PD control implementation is ilustrated by the block diagram below: + * + * .-------------------. + * .-------. .------> PROPORTIONAL (Kp) >-. .-------. + * | ADD | pwm_error | '-------------------' | | ADD | pwm .---------------. + * VBusInmV --> + >--------------| '--> + >-------> PWM generator >-. + * | | | .------------------. | | '---------------' | + * vbus_measured .-> - | '-----> DERIVATIVE (Kd) >-------> + | | + * | '-------' pwm_error_previous -> | '-------' | + * | '------------------' | + * '-------------------------------------------------------------------------------------------' + * + * pwm = Kp * pwm_error + (Kd * der) + * + * where: + * pwm_error is calulated from vbus_error + * Kp = Proptional Constant. + * Kd = Derivative Constant. + * der = pwm_error - pwm_error_previous + * (der: differential error) + */ +static int32_t PWR_VBUSSetVoltage(uint32_t Instance, + uint32_t VBusInmV, + uint16_t Precision) +{ + static uint8_t aPWMDutyCalibrated[VBUS_LEVEL_NB] = + { + 0x0, /* 5V */ + 0x0, /* 9V */ + 0x0, /* 15V */ + 0x0, /* 18V */ + 0x0 /* Will be used to store latest PPS request */ + }; + + int32_t _retr = BSP_ERROR_PERIPH_FAILURE; + static uint16_t duty_cycle; + uint8_t duty_calibrated = 0u; + uint32_t vbus_measured; +#if defined(_TRACE) + char _str[20u]; +#endif + + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + duty_cycle = PWR_GetPWMDutyCycle(); + switch (VBusInmV) + { + case VBUS_VOLTAGE_0V_IN_MV: + { + duty_cycle = 0x10u; + /* Set PWM duty cycle to its initial value */ + PWR_SetPWMDutyCycle(duty_cycle); + _retr = BSP_ERROR_NONE; + break; + } + + case VBUS_VOLTAGE_5V_IN_MV: + duty_cycle = aPWMDutyCycleLUT[VBUS_5_V]; + duty_calibrated = aPWMDutyCalibrated[VBUS_5_V]; + break; + case VBUS_VOLTAGE_9V_IN_MV: + duty_calibrated = aPWMDutyCalibrated[VBUS_9_V]; + if (1u == duty_calibrated ) + { + duty_cycle = aPWMDutyCycleLUT[VBUS_9_V]; + } + break; + case VBUS_VOLTAGE_15V_IN_MV: + duty_calibrated = aPWMDutyCalibrated[VBUS_15_V]; + if (1u == duty_calibrated ) + { + duty_cycle = aPWMDutyCycleLUT[VBUS_15_V]; + } + break; + case VBUS_VOLTAGE_18V_IN_MV: + duty_cycle = aPWMDutyCycleLUT[VBUS_18_V]; + if (1u == duty_calibrated ) + { + duty_cycle = aPWMDutyCycleLUT[VBUS_18_V]; + } + break; + default: + duty_cycle = aPWMDutyCycleLUT[VBUS_PPS_V]; + duty_calibrated = 0u; + break; + } + + if (BSP_ERROR_NONE != _retr) + { + _retr = BSP_ERROR_NONE; +#if defined(_TRACE) + sprintf(_str,"==%d::%d",duty_cycle,duty_calibrated); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG,0,0,(uint8_t*)_str, strlen(_str)); +#endif + +#if defined(DBG_LOG) + _DbgLogIndex=0; +#endif /* DBG_LOG */ + + if (duty_calibrated == 1u) + { + uint32_t _tickstart = HAL_GetTick(); + PWR_SetPWMDutyCycle(duty_cycle); + + /* Check if the voltage is at the expected level */ + do + { + vbus_measured = BSP_PWR_VBUSGetVoltage(Instance); + for(int32_t index=0; index < 2000; index++) + { + __DSB(); + }; +#ifdef PWR_DEBUG + sprintf(_str,"svcc:%ld:%d", vbus_measured, duty_cycle); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, Instance, 0, (uint8_t*)_str, strlen(_str)); +#endif + /* timeout to avoid infinite loop in case of power default */ + if ((HAL_GetTick() - _tickstart) > 300u) + { + /* discard the VBUS and return an error */ + (void)BSP_PWR_VBUSOff(Instance); + return PWR_ERROR; + } + } + while ((ABS(vbus_measured - VBusInmV)) > 200u); + } + else + { + int32_t vbus_error; + int32_t vbus_previous; + int32_t pwm; + int32_t pwm_step_current; + int32_t pwm_step_previous; + int32_t pwm_error = 0u; + int32_t pwm_error_previous; + uint8_t nb_pll_loop; + pwm_step_previous = 0u; + pwm_step_current = duty_cycle; + vbus_previous = vbus_measured = 0u; + nb_pll_loop = 0u; + + do + { + pwm_step_previous = pwm_step_current; + vbus_previous = vbus_measured; + pwm_error_previous = pwm_error; + pwm_error = 0; + pwm = 0; + + PWR_SetPWMDutyCycle(duty_cycle); + + /* We can not avoid this DCDC takes time to lock .... */ + for(int32_t index=0; index < 7000; index++) + { + __DSB(); + }; + + /* Measure actual VBUS voltage level */ + (void)BSP_USBPD_PWR_VBUSGetVoltage(Instance, &vbus_measured); + /* Protection to handle the case where power is not present */ + if(vbus_measured < 300u) + { + /* discard the VBUS and return an error */ + (void)BSP_USBPD_PWR_VBUSOff(Instance); + return BSP_ERROR_PERIPH_FAILURE; + } + + /* Calculate VBUS error = target - the measure */ + vbus_error = (int32_t)(VBusInmV) - (int32_t)(vbus_measured); + + /* Convert VBUS error into PWM error (pwm_error) */ + if (((ABS(vbus_error)) >= USBPD_PWR_DCDC_PRECISION)) + { + /* Calculate PWM error */ + pwm_error = (1000 * duty_cycle) / vbus_measured; + pwm_error *= vbus_error; + pwm_error /= 1000; + + /* Calculate new PWM setpoint */ + pwm = pwm_error * (int32_t)BSP_USBPD_PWR_DCDC_PLL_P_N; + pwm /= (int32_t)BSP_USBPD_PWR_DCDC_PLL_P_D; + pwm += (((pwm_error) - (pwm_error_previous)) * (int32_t)BSP_USBPD_PWR_DCDC_PLL_D_N) / ((int32_t)BSP_USBPD_PWR_DCDC_PLL_D_D); + } + + /* Set PWM setpoint to its min value (if min DCDC capabilities is reached) */ + if (pwm == 0) + { + if (vbus_error > 0) + { + pwm = (int32_t)BSP_USBPD_PWR_DCDC_MIN_PWM_STEP; + } + else + { + pwm = -(int32_t)BSP_USBPD_PWR_DCDC_MIN_PWM_STEP; + } + } + /* Limit PWM setpoint to max value (if required) */ + else + { + if ((ABS(pwm)) >= (uint32_t)BSP_USBPD_PWR_DCDC_MAX_PWM_STEP) + { + if (pwm > 0) + { + pwm = (int32_t)BSP_USBPD_PWR_DCDC_MAX_PWM_STEP; + } + else + { + pwm = -(int32_t)BSP_USBPD_PWR_DCDC_MAX_PWM_STEP; + } + } + } + + /* Calculate duty cycle setpoint from PWM setpoint */ + if (pwm > 0) + { + if ((duty_cycle + (uint32_t)(pwm)) <= (uint32_t)BSP_USBPD_PWR_DCDC_MAX_PWM_VALUE) + { + duty_cycle += (uint32_t)(ABS(pwm)); + } + } + else + { + if ((duty_cycle - (uint32_t)(pwm)) > (uint32_t)BSP_USBPD_PWR_DCDC_MIN_PWM_VALUE) + { + duty_cycle -= (uint32_t)ABS(pwm); + } + } + + pwm_step_current = duty_cycle; + +#if defined(DBG_LOG) + _Err[_DbgLogIndex]=vbus_error; + _Pwm[_DbgLogIndex]=duty_cycle; + _PwmE[_DbgLogIndex]=pwm; + _DbgLogIndex++; + if (_DbgLogIndex >= sizeof(_vbusout) / 4) + { + _DbgLogIndex=0; + } +#endif /* DBG_LOG*/ + + if (((ABS((int16_t)pwm_step_current-(int16_t)pwm_step_previous)) <= BSP_USBPD_PWR_DCDC_MIN_PWM_STEP) + && ((ABS(((int32_t)vbus_measured - (int32_t)vbus_previous))) <= USBPD_PWR_DCDC_PRECISION) + && ((ABS(vbus_error)) <= Precision)) + { + nb_pll_loop++; + } + else + { + nb_pll_loop = 0u; + } + } + while (nb_pll_loop < 1u); + + /* save the PWM value for the next settings */ + switch (VBusInmV) + { + case VBUS_VOLTAGE_0V_IN_MV: + break; + case VBUS_VOLTAGE_5V_IN_MV: + { + aPWMDutyCycleLUT[VBUS_5_V] = duty_cycle; + aPWMDutyCalibrated[VBUS_5_V] = 1u; +#if defined(_TRACE) + sprintf(_str, "ca5V:%d", duty_cycle); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, (uint8_t*)_str, strlen(_str)); +#endif + break; + } + case VBUS_VOLTAGE_9V_IN_MV: + { + aPWMDutyCycleLUT[VBUS_9_V] = duty_cycle; + aPWMDutyCalibrated[VBUS_9_V] = 1u; +#if defined(_TRACE) + sprintf(_str, "ca9V:%d", duty_cycle); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, (uint8_t*)_str, strlen(_str)); +#endif + break; + } + case VBUS_VOLTAGE_15V_IN_MV: + { + aPWMDutyCycleLUT[VBUS_15_V] = duty_cycle; + aPWMDutyCalibrated[VBUS_15_V] = 1u; +#if defined(_TRACE) + sprintf(_str, "ca15V:%d", duty_cycle); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, (uint8_t*)_str, strlen(_str)); +#endif + break; + } + case VBUS_VOLTAGE_18V_IN_MV: + { + aPWMDutyCycleLUT[VBUS_18_V] = duty_cycle; + aPWMDutyCalibrated[VBUS_18_V] = 1u; +#if defined(_TRACE) + sprintf(_str, "ca18V:%d", duty_cycle); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, (uint8_t*)_str, strlen(_str)); +#endif + break; + } + default: + { + aPWMDutyCycleLUT[VBUS_PPS_V] = duty_cycle; +#if defined(_TRACE) + sprintf(_str, "ca1PPS:%d", duty_cycle); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0, 0, (uint8_t*)_str, strlen(_str)); +#endif + break; + } + } + } + } + } + else + { + _retr = BSP_ERROR_PERIPH_FAILURE; + } + + return _retr; +} + +/** + * @brief Start I/V sense on both Type-C ports. + * @retval 0 success else fail + */ +static uint8_t PWR_StartVBusSensing(void) +{ + uint8_t ret = 0u; + + /* Start ADCx conversions */ + if (HAL_ADC_Start_DMA(&hadc1, (uint32_t *)aADCxConvertedValues, 4u) != HAL_OK) + { + ret++; + } + + return ret; +} + +/** + * @brief Stop I/V sense on both Type-C ports. + * @retval 0 success else fail + */ +static uint8_t PWR_StopVBusSensing(void) +{ + uint8_t ret = 0u; + + /* Stop ADCx conversions */ + if (HAL_ADC_Stop_DMA(&hadc1) != HAL_OK) + { + ret++; + } + + VBUSSensingCompleted = 0u; + + return ret; +} + +/** + * @brief Pause I/V sense on both Type-C ports. + * @retval 0 success else fail + */ +static uint8_t PWR_PauseVBusSensing(void) +{ + uint8_t ret = 0u; + + /* Stop on-going conversions */ + if (HAL_ADC_Stop_DMA(&hadc1) != HAL_OK) + { + ret++; + } + + /* Reset Channel selection register */ + hadc1.Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL); + + VBUSSensingCompleted = 0u; + + return ret; +} + +/** + * @brief Resume I/V sense on both Type-C ports. + * @retval 0 success else fail + */ +static uint8_t PWR_ResumeVBusSensing(void) +{ + uint8_t ret = 0u; + uint32_t tickstart; + + /* Reset Channel selection register */ + hadc1.Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL); + + /* Configure the ADC channel used to sense VBUS1 voltage */ + ret += PWR_ADC_SetChannelConfig(ADC_VSENSE_1); + + /* Configure the ADC channel used to sense VBUS1 current */ + ret += PWR_ADC_SetChannelConfig(ADC_ISENSE_1); + + /* Configure the ADC channel used to sense VBUS2 voltage */ + ret += PWR_ADC_SetChannelConfig(ADC_VSENSE_2); + + /* Configure the ADC channel used to sense VBUS2 current */ + ret += PWR_ADC_SetChannelConfig(ADC_ISENSE_2); + + /* Start ADCx conversions */ + if (HAL_ADC_Start_DMA(&hadc1, (uint32_t *)aADCxConvertedValues, 4u) != HAL_OK) + { + ret++; + } + + /* Wait until 1st DMA conversion is completed */ + tickstart = HAL_GetTick(); + + while (VBUSSensingCompleted == 0u) + { + if((HAL_GetTick() - tickstart) >= VBUS_SENSING_RESUME_TIMEOUT) + { + /* Exit loop */ + break; + } + } + + + return ret; +} + +/** + * @brief ADC MSP initialization + * @param hadc ADC handle + * @retval None + */ +static void PWR_ADC_MspInit(ADC_HandleTypeDef *hadc) +{ + /* Enable ADCx clock */ + ADCx_CLK_ENABLE(); + + /* Enable clock of DMA associated to the peripheral */ + ADCx_DMA_CLK_ENABLE(); + + /* Configure DMA parameters */ + hdma_adc1.Instance = ADCx_DMA; + hdma_adc1.Init.Request = DMA_REQUEST_ADC1; + hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY; + hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE; + hdma_adc1.Init.MemInc = DMA_MINC_ENABLE; + hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD; + hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD; + hdma_adc1.Init.Mode = DMA_CIRCULAR; + hdma_adc1.Init.Priority = DMA_PRIORITY_HIGH; + + /* Initialize the DMA */ + (void)HAL_DMA_Init(&hdma_adc1); + + /* Associate the initialized DMA handle to the ADC handle */ + __HAL_LINKDMA(hadc, DMA_Handle, hdma_adc1); + + /* NVIC configuration for DMA interrupt (transfer completion or error) */ + HAL_NVIC_SetPriority(ADCx_DMA_IRQn, 1u, 0u); + HAL_NVIC_EnableIRQ(ADCx_DMA_IRQn); + + /* NVIC configuration for ADCx interrupt */ + HAL_NVIC_SetPriority(ADC1_COMP_IRQn, 0u, 0u); + HAL_NVIC_EnableIRQ(ADC1_COMP_IRQn); +} + +/** + * @brief ADC MSP de-initialization + * @param hadc ADC handle + * @retval None + */ +static void PWR_ADC_MspDeInit(ADC_HandleTypeDef *hadc) +{ + /* Reset ADC peripheral */ + ADCx_FORCE_RESET(); + ADCx_RELEASE_RESET(); + + /* Disable ADCx clock */ + ADCx_CLK_DISABLE(); + + /* Disable the NVIC configuration for ADCx interrupt */ + HAL_NVIC_DisableIRQ(ADC1_COMP_IRQn); + + /* Disable NVIC configuration for DMA interrupt */ + HAL_NVIC_DisableIRQ(ADCx_DMA_IRQn); + + /* De-Initialize the DMA */ + (void)HAL_DMA_DeInit(hadc->DMA_Handle); +} + +/** + * @brief Analog watchdog 1 callback + * @param hadc ADC handle + * @retval None + */ +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc) +{ + ADC_AnalogWDGConfTypeDef adc_awd_config = {0u}; + + if (Context.PortInfo[USBPD_PWR_TYPE_C_PORT_1].pfnVBUSDetectCallback != NULL) + { + if (Context.PortInfo[USBPD_PWR_TYPE_C_PORT_1].VBUSConnectionStatus == VBUS_NOT_CONNECTED) + { + /* PORT1: VBUS_NOT_CONNECTED to VBUS_CONNECTED transition */ + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_1].VBUSConnectionStatus = VBUS_CONNECTED; + adc_awd_config.HighThreshold = 0xFFF; + adc_awd_config.LowThreshold = PWR_ConvertVoltageToThreshold(Context.PortInfo[USBPD_PWR_TYPE_C_PORT_1].VBUSDisconnectionThreshold); + } + else + { + /* PORT1: VBUS_CONNECTED to VBUS_NOT_CONNECTED transition */ + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_1].VBUSConnectionStatus = VBUS_NOT_CONNECTED; + adc_awd_config.HighThreshold = PWR_ConvertVoltageToThreshold(VBUS_CONNECTION_THRESHOLD); + adc_awd_config.LowThreshold = 0u; + } + + /* Update AWD Low/High thresholds to detect VBUS disconnection */ + adc_awd_config.WatchdogNumber = ADC_ANALOGWATCHDOG_1; + adc_awd_config.WatchdogMode = ADC_ANALOGWATCHDOG_SINGLE_REG; + adc_awd_config.Channel = ADCx_CHANNEL_VSENSE_1; + adc_awd_config.ITMode = ENABLE; + + /* Update AWD configuration */ + (void)HAL_ADC_AnalogWDGConfig(hadc, &adc_awd_config); + + /* Call registered callback function */ + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_1].pfnVBUSDetectCallback(USBPD_PWR_TYPE_C_PORT_1, + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_1].VBUSConnectionStatus); + } +} + +/** + * @brief Analog watchdog 2 callback + * @param hadc ADC handle + * @retval None + */ +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef* hadc) +{ + ADC_AnalogWDGConfTypeDef adc_awd_config = {0u}; + + if (Context.PortInfo[USBPD_PWR_TYPE_C_PORT_2].pfnVBUSDetectCallback != NULL) + { + if (Context.PortInfo[USBPD_PWR_TYPE_C_PORT_2].VBUSConnectionStatus == VBUS_NOT_CONNECTED) + { + /* PORT2: VBUS_NOT_CONNECTED to VBUS_CONNECTED transition */ + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_2].VBUSConnectionStatus = VBUS_CONNECTED; + adc_awd_config.HighThreshold = 0xFFF; + adc_awd_config.LowThreshold = PWR_ConvertVoltageToThreshold(Context.PortInfo[USBPD_PWR_TYPE_C_PORT_2].VBUSDisconnectionThreshold); + } + else + { + /* PORT2: VBUS_CONNECTED to VBUS_NOT_CONNECTED transition */ + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_2].VBUSConnectionStatus = VBUS_NOT_CONNECTED; + adc_awd_config.HighThreshold = PWR_ConvertVoltageToThreshold(VBUS_CONNECTION_THRESHOLD); + adc_awd_config.LowThreshold = 0u; + } + + /* Update AWD2 Low/High thresholds to detect next VBUS connection/disconnection */ + adc_awd_config.WatchdogNumber = ADC_ANALOGWATCHDOG_2; + adc_awd_config.WatchdogMode = ADC_ANALOGWATCHDOG_SINGLE_REG; + adc_awd_config.Channel = ADCx_CHANNEL_VSENSE_2; + adc_awd_config.ITMode = ENABLE; + + /* Update AWD2 configuration */ + (void)HAL_ADC_AnalogWDGConfig(hadc, &adc_awd_config); + + /* Call registered callback function */ + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_2].pfnVBUSDetectCallback(USBPD_PWR_TYPE_C_PORT_2, + Context.PortInfo[USBPD_PWR_TYPE_C_PORT_2].VBUSConnectionStatus); + } +} + +/** + * @brief Initialize the LPTIM MSP. + * @retval None + */ +static void LPTIMx_MspInit(void) +{ + RCC_PeriphCLKInitTypeDef clk_config = {0u}; + GPIO_InitTypeDef gpio_config = {0u}; + + /* Select the PCLK clock as LPTIM peripheral clock */ + clk_config.PeriphClockSelection = RCC_PERIPHCLK_LPTIM1; + clk_config.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_PCLK1; + (void)HAL_RCCEx_PeriphCLKConfig(&clk_config); + + /* Enable LPTIM1 clock */ + __HAL_RCC_LPTIM1_CLK_ENABLE(); + + /* Force & Release LPTIM1 Clock Reset */ + __HAL_RCC_LPTIM1_FORCE_RESET(); + __HAL_RCC_LPTIM1_RELEASE_RESET(); + + /* Enable GPIOC clock */ + GPIO_V_CTL1_CLK_ENABLE(); + + /* Configure PC1 (LPTIM1_IN1) in alternate function (AF0) */ + gpio_config.Pin = GPIO_V_CTL1_PIN; + gpio_config.Mode = GPIO_MODE_AF_OD; + gpio_config.Pull = GPIO_NOPULL; + gpio_config.Speed = GPIO_SPEED_FREQ_HIGH; + gpio_config.Alternate = GPIO_AF0_LPTIM1; + HAL_GPIO_Init(GPIO_V_CTL1_PORT, &gpio_config); +} + +/** + * @brief Initialize the LPTIM MSP. + * @retval None + */ +static void LPTIMx_MspDeInit(void) +{ + /* Reset PC1 configuration */ + HAL_GPIO_DeInit(GPIO_V_CTL1_PORT, GPIO_V_CTL1_PIN); + + /* Disable LPTIM1 clock */ + __HAL_RCC_LPTIM1_CLK_DISABLE(); +} + +/** + * @brief Conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +void PWR_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc) +{ + UNUSED(hadc); + VBUSSensingCompleted = 1u; +} + +/** + * @brief Initialize VBUS voltage control (VBUS defaults at 5V) + * @retval 0 success else fail + */ +static uint8_t PWR_InitPowerSource(void) +{ + uint8_t ret = 0u; + + /* LPTIM1 initialization */ + hlptim.Instance = LPTIM1; + hlptim.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC; + hlptim.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL; + hlptim.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1; + hlptim.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE; + hlptim.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH; + hlptim.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE; + + LPTIMx_MspDeInit(); + HAL_LPTIM_DeInit(&hlptim); + LPTIMx_MspInit(); + if (HAL_LPTIM_Init(&hlptim) != HAL_OK) + { + ret++; + } + + /* Start PWM signal generation (VBUS voltage defaults at 5V)*/ + /* Period = (F(APB1) / 20K) + 1 */ + if (HAL_LPTIM_PWM_Start(&hlptim, (BSP_USBPD_PWR_DCDC_MAX_PWM_VALUE + 1u), 0x10) != HAL_OK) + { + ret++; + } + + return ret; +} + +/** + * @brief De-initialize VBUS voltage control + * @retval None + */ +static void PWR_DeInitPowerSource(void) +{ + (void)HAL_LPTIM_PWM_Stop(&hlptim); + LPTIMx_MspDeInit(); + (void)HAL_LPTIM_DeInit(&hlptim); +} + +/** + * @brief Set the PWM signal duty cycle + * @param PWMDutyCycle PWM signal duty cycle + * @retval None + */ +static void PWR_SetPWMDutyCycle(uint16_t PWMDutyCycle) +{ + __HAL_LPTIM_COMPARE_SET(&hlptim , PWMDutyCycle); + LL_LPTIM_SetCompare(hlptim.Instance, PWMDutyCycle); +} + +/** + * @brief SGet the PWM signal duty cycle + * @retval PWMDutyCycle PWM signal duty cycle + */ +static uint16_t PWR_GetPWMDutyCycle(void) +{ + return (uint16_t)READ_REG(hlptim.Instance->CMP); +} + + +/** + * @brief Precharge C57 . + * @param Instance Type-C port identifier + * This parameter can be take one of the following values: + * @arg @ref USBPD_PWR_TYPE_C_PORT_1 + * @retval None + */ +static void PWR_DCDCPreChargeC57(uint32_t Instance) +{ + if (Instance == USBPD_PWR_TYPE_C_PORT_1) + { + /* Make sure SOURCE_EN is not OFF */ + PWR_GPIO_Off(GPIO_SOURCE_EN); + + { + GPIO_InitTypeDef GPIO_InitStruct; + GPIOx_CLK_ENABLE(GPIO_V_CTL1); + GPIO_InitStruct.Pin = GPIO_PIN[GPIO_V_CTL1]; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIO_PORT[GPIO_V_CTL1], &GPIO_InitStruct); + HAL_GPIO_WritePin(GPIO_PORT[GPIO_V_CTL1], GPIO_PIN[GPIO_V_CTL1], GPIO_PIN_SET); + } + + + /* Step 1 ==================================================================== + Step 1: DCDC_EN detects its voltage to ensure PSU 19V exist + Wait C57 pre-charge for 20ms... */ + HAL_Delay(20); + PWR_GPIO_On(GPIO_V_CTL2); /* DCDC_EN = 1, so DCDC output is on */ + /* Wait stabilization time for 10ms... */ + HAL_Delay(10); + + /* Step 2 ==================================================================== + Step 2: PWM_CTL provides about 0.8V level before DCDC_EN=1 */ + + /* Equivalent 950mV PWM_CTL voltage (in Push Pull mode) should be provided, + This leads to 800mV feedback voltage for TI 54540 (pin 5, feedback pin), + equivalent 950mV should be Provided short time (I suggest 30ms) before and + after DCDC_EN=1, then PWM_CTL can be Configured in OD mode, and set + PWM_CTL with proper duty cycle to get desired VSOURCE voltage (5V in general). + */ + + /* Step 3 ==================================================================== + Step 3: DCDC_EN=1, then PWM_CTL changes to provide PWM waveform by 0 and open-drain + Step 4: go back to working mode... */ + PWR_GPIO_Init(GPIO_V_CTL1); + (void)PWR_InitPowerSource(); + HAL_Delay(20); + } +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.h b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.h new file mode 100644 index 0000000..ad1215e --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.h @@ -0,0 +1,509 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_pwr.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * stm32g0c1e_eval_pwr.c firmware driver. + ****************************************************************************** + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0C1E_EVAL_POWER +#define STM32G0C1E_EVAL_POWER + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_POWER STM32G0C1E_EVAL POWER + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Exported_Types Exported Types based on BSP V1 specification (keep for legacy) + * @{ + */ + +/** + * @brief POWER Status + */ +typedef enum +{ + PWR_OK = 0, + PWR_ERROR +} PWR_StatusTypeDef; + +/** + * @brief Power role + */ +#define PWR_PowerRoleTypeDef USBPD_PWR_PowerRoleTypeDef + +/** + * @brief Voltage control mode + */ +#define PWR_DCDCCtrlModeTypeDef USBPD_PWR_DCDCCtrlModeTypeDef + +/** + * @brief VBUS connection status + */ +#define PWR_VBUSConnectionStatusTypeDef USBPD_PWR_VBUSConnectionStatusTypeDef + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Exported_Types2 Exported Types based on BSP V2 secification + *@{ + */ + +/** + * @brief Power role + */ +typedef enum +{ + POWER_ROLE_SOURCE = 0, + POWER_ROLE_SINK, + POWER_ROLE_DUAL +} +USBPD_PWR_PowerRoleTypeDef; + +/** + * @brief Voltage control mode + */ +typedef enum +{ + DCDC_CTRL_MODE_UNKNOWN = 0, + DCDC_CTRL_MODE_GPIO, + DCDC_CTRL_MODE_PWM, +} USBPD_PWR_DCDCCtrlModeTypeDef; + +/** + * @brief VBUS connection status + */ +typedef enum +{ + VBUS_CONNECTED = 0, + VBUS_NOT_CONNECTED +} USBPD_PWR_VBUSConnectionStatusTypeDef; + +/* Keep for Legacy BSP V1 */ +/** + * @brief VBUS Detection Callback + */ +typedef void PWR_VBUSDetectCallbackFunc(uint32_t Instance, + PWR_VBUSConnectionStatusTypeDef VBUSConnectionStatus); + +/** + * @brief VBUS Detection Callback + */ +typedef void USBPD_PWR_VBUSDetectCallbackFunc(uint32_t Instance, + USBPD_PWR_VBUSConnectionStatusTypeDef VBUSConnectionStatus); + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Exported_Constants Exported Constants based on BSP V1 specification (keep for legacy) + * @{ + */ +/** + * @brief Number of TypeC ports + */ +#define PWR_TYPEC_PORT_NB USBPD_PWR_INSTANCES_NBR + +/** + * @brief Type-C port identifier + */ +#define TYPE_C_PORT_1 USBPD_PWR_TYPE_C_PORT_1 +#define TYPE_C_PORT_2 USBPD_PWR_TYPE_C_PORT_2 + +/** + * @brief CC pin identifier + */ +#define TYPE_C_CC1 USBPD_PWR_TYPE_C_CC1 +#define TYPE_C_CC2 USBPD_PWR_TYPE_C_CC2 + + +/** + * @brief VBUS disconnection threshold values (in mV) + */ +#define BSP_PWR_HIGH_VBUS_THRESHOLD USBPD_PWR_HIGH_VBUS_THRESHOLD +#define BSP_PWR_LOW_VBUS_THRESHOLD USBPD_PWR_LOW_VBUS_THRESHOLD + +/** + * @brief VBUS discharge parameters + */ +#define BSP_PWR_DISCHARGE_MARGIN USBPD_PWR_DISCHARGE_MARGIN +#define BSP_PWR_DISCHARGE_TIME USBPD_PWR_DISCHARGE_TIME + +/** + * @brief Calibration settings + */ +#define BSP_PWR_DCDC_PRECISION USBPD_PWR_DCDC_PRECISION +#define BSP_PWR_CALIBRATION_ENABLED USBPD_PWR_CALIBRATION_ENABLED +#define BSP_PWR_CALIBRATION_DISABLED USBPD_PWR_CALIBRATION_DISABLED + +/** + * @brief power timeout + */ +#define BSP_PWR_TIMEOUT_PDO USBPD_PWR_TIMEOUT_PDO +#define BSP_PWR_TIMEOUT_APDO USBPD_PWR_TIMEOUT_APDO + +/** + * @brief Invalid value set during issue with voltage setting + */ +#define BSP_PWR_INVALID_VALUE USBPD_PWR_INVALID_VALUE + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_USBPD_PWR_Exported_Constants2 Exported Constants on BSP V2 specification + @{ + */ +/* Defines error for BSP V2 (copy for legacy reasons) */ +/* Common Error codes */ +#ifndef BSP_ERROR_NONE + #define BSP_ERROR_NONE 0 +#endif +#ifndef BSP_ERROR_NO_INIT + #define BSP_ERROR_NO_INIT -1 +#endif +#ifndef BSP_ERROR_WRONG_PARAM + #define BSP_ERROR_WRONG_PARAM -2 +#endif +#ifndef BSP_ERROR_PERIPH_FAILURE + #define BSP_ERROR_PERIPH_FAILURE -4 +#endif +#ifndef BSP_ERROR_FEATURE_NOT_SUPPORTED + #define BSP_ERROR_FEATURE_NOT_SUPPORTED -11 +#endif + +/** + * @brief Number of TypeC ports + */ +#define USBPD_PWR_INSTANCES_NBR 2u + +/** + * @brief Type-C port identifier + */ +#define USBPD_PWR_TYPE_C_PORT_1 0u +#define USBPD_PWR_TYPE_C_PORT_2 1u + +/** + * @brief CC pin identifier + */ +#define USBPD_PWR_TYPE_C_CC1 1u +#define USBPD_PWR_TYPE_C_CC2 2u + +/** + * @brief VBUS disconnection threshold values (in mV) + */ +#define USBPD_PWR_HIGH_VBUS_THRESHOLD (2800u) +#define USBPD_PWR_LOW_VBUS_THRESHOLD (750U) +#define USBPD_PWR_VBUS_THRESHOLD_5V (3900u) +#define USBPD_PWR_VBUS_THRESHOLD_9V (7000u) +#define USBPD_PWR_VBUS_THRESHOLD_15V (12500u) +#define USBPD_PWR_VBUS_THRESHOLD_20V (17000u) +#define USBPD_PWR_VBUS_THRESHOLD_APDO (2150u) + +/** + * @brief VBUS discharge parameters + */ +#define USBPD_PWR_DISCHARGE_MARGIN (500u) +#define USBPD_PWR_DISCHARGE_TIME (6u) + +/** + * @brief Calibration settings + */ +#define USBPD_PWR_DCDC_PRECISION (20u) /* DCDC output precision set to 20mV (Noise)*/ +#define USBPD_PWR_CALIBRATION_ENABLED (1u) +#define USBPD_PWR_CALIBRATION_DISABLED (0u) + +/** + * @brief Standard VBUS voltage levels + */ +#define USBPD_PWR_VBUS_5V 5000u +#define USBPD_PWR_VBUS_9V 9000u +#define USBPD_PWR_VBUS_15V 15000u + +/** + * @brief power timeout + */ +#define USBPD_PWR_TIMEOUT_PDO 250u /* Timeout for PDO to PDO or PDO to APDO at 250ms*/ +#define USBPD_PWR_TIMEOUT_APDO 25u /* Timeout for APDO to APDO at 25ms*/ + +/** + * @brief Invalid value set during issue with voltage setting + */ +#define USBPD_PWR_INVALID_VALUE 0xFFFFFFFFu + +#define GPIO_SOURCE_EN_PIN GPIO_PIN_3 /* PD.03 */ +#define GPIO_SOURCE_EN_PORT GPIOD +#define GPIO_SOURCE_EN_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() + +#define GPIO_VBUS_DISCHARGE1_PIN GPIO_PIN_13 /* PB.13 */ +#define GPIO_VBUS_DISCHARGE1_PORT GPIOB +#define GPIO_VBUS_DISCHARGE1_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define GPIO_VBUS_DISCHARGE2_PIN GPIO_PIN_14 /* PB.14 */ +#define GPIO_VBUS_DISCHARGE2_PORT GPIOB +#define GPIO_VBUS_DISCHARGE2_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define GPIO_VCONN_EN1_PIN GPIO_PIN_4 /* PD.04 */ +#define GPIO_VCONN_EN1_PORT GPIOD +#define GPIO_VCONN_EN1_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() + +#define GPIO_VCONN_EN2_PIN GPIO_PIN_9 /* PB.09 */ +#define GPIO_VCONN_EN2_PORT GPIOB +#define GPIO_VCONN_EN2_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define GPIO_VCONN_DISCHARGE1_PIN GPIO_PIN_2 /* PA.02 */ +#define GPIO_VCONN_DISCHARGE1_PORT GPIOA +#define GPIO_VCONN_DISCHARGE1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() + +#define GPIO_VCONN_DISCHARGE2_PIN GPIO_PIN_0 /* PB.00 */ +#define GPIO_VCONN_DISCHARGE2_PORT GPIOB +#define GPIO_VCONN_DISCHARGE2_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define GPIO_V_CTL2_PIN GPIO_PIN_1 /* PA.01 */ +#define GPIO_V_CTL2_PORT GPIOA +#define GPIO_V_CTL2_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() + +#define GPIO_V_CTL1_PIN GPIO_PIN_1 /* PC.01 */ +#define GPIO_V_CTL1_PORT GPIOC +#define GPIO_V_CTL1_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() + +/* Definition of ADCx clock resources */ +#define ADCx ADC1 +#define ADCx_CLK_ENABLE() __HAL_RCC_ADC_CLK_ENABLE() +#define ADCx_CLK_DISABLE() __HAL_RCC_ADC_CLK_DISABLE() + +#define ADCx_FORCE_RESET() __HAL_RCC_ADC_FORCE_RESET() +#define ADCx_RELEASE_RESET() __HAL_RCC_ADC_RELEASE_RESET() + +/* Definition of ADCx channels */ +#define ADCx_CHANNEL_VSENSE_1 ADC_CHANNEL_9 +#define ADCx_CHANNEL_ISENSE_1 ADC_CHANNEL_11 +#define ADCx_CHANNEL_VSENSE_2 ADC_CHANNEL_3 +#define ADCx_CHANNEL_ISENSE_2 ADC_CHANNEL_16 +#define ADCx_CHANNEL_VSENSE_DCDC ADC_CHANNEL_15 + +/* Definition of ADCx channels */ +#define ADCxChanneln 5u + +#define ADCx_CHANNEL_VSENSE_1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define ADCx_CHANNEL_VSENSE_1_GPIO_PORT GPIOB +#define ADCx_CHANNEL_VSENSE_1_GPIO_PIN GPIO_PIN_1 + +#define ADCx_CHANNEL_ISENSE_1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define ADCx_CHANNEL_ISENSE_1_GPIO_PORT GPIOB +#define ADCx_CHANNEL_ISENSE_1_GPIO_PIN GPIO_PIN_10 + +#define ADCx_CHANNEL_VSENSE_2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define ADCx_CHANNEL_VSENSE_2_GPIO_PORT GPIOA +#define ADCx_CHANNEL_VSENSE_2_GPIO_PIN GPIO_PIN_3 + +#define ADCx_CHANNEL_ISENSE_2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define ADCx_CHANNEL_ISENSE_2_GPIO_PORT GPIOB +#define ADCx_CHANNEL_ISENSE_2_GPIO_PIN GPIO_PIN_12 + +#define ADCx_CHANNEL_VSENSE_DCDC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define ADCx_CHANNEL_VSENSE_DCDC_GPIO_PORT GPIOB +#define ADCx_CHANNEL_VSENSE_DCDC_GPIO_PIN GPIO_PIN_11 + +/* Definition of ADCx DMA resources */ +#define ADCx_DMA_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() +#define ADCx_DMA DMA1_Channel1 + +/* Definition of DMA NVIC resources */ +#define ADCx_DMA_IRQn DMA1_Channel1_IRQn +#define ADCx_DMA_IRQHandler DMA1_Channel1_IRQHandler + +/* Definition of ADCx NVIC resources */ +#define ADCx_IRQn ADC1_COMP_IRQn +#define ADCx_IRQHandler ADC1_COMP_IRQHandler + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_POWER_Exported_Functions Exported Functions based on BSP V1 specification (keep for legacy) + * @{ + */ +PWR_StatusTypeDef BSP_PWR_Init(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSInit(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSDeInit(uint32_t PortId); + +void BSP_PWR_VBUSIsGPIO(uint32_t *voltage1, uint32_t *voltage2, uint32_t *voltage3); + +PWR_StatusTypeDef BSP_PWR_VBUSOn(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSOff(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Fixed(uint32_t PortNum, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Variable(uint32_t PortNum, + uint32_t VbusTargetMaxInmv, + uint32_t VbusTargetMinInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Battery(uint32_t PortId, + uint32_t VbusTargetMin, + uint32_t VbusTargetMax, + uint32_t OperatingPower, + uint32_t MaxOperatingPower); +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_APDO(uint32_t PortId, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + int32_t Delta); +uint32_t BSP_PWR_VBUSGetVoltage(uint32_t PortId); + +int32_t BSP_PWR_VBUSGetCurrent(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VCONNInit(uint32_t PortId, + uint32_t CCPinId); + +PWR_StatusTypeDef BSP_PWR_VCONNDeInit(uint32_t PortId, + uint32_t CCPinId); + +PWR_StatusTypeDef BSP_PWR_VCONNOn(uint32_t PortId, + uint32_t CCPinId); + +PWR_StatusTypeDef BSP_PWR_VCONNOff(uint32_t PortId, + uint32_t CCPinId); + +void BSP_PWR_SetVBUSDisconnectionThreshold(uint32_t PortId, + uint32_t VoltageThreshold); + +PWR_StatusTypeDef BSP_PWR_RegisterVBUSDetectCallback(uint32_t PortId, + PWR_VBUSDetectCallbackFunc * pfnVBUSDetectCallback); + +uint8_t BSP_PWR_VBUSIsOn(uint32_t PortId); + +uint8_t BSP_PWR_VCONNIsOn(uint32_t PortId, + uint32_t CCPinId); + +uint32_t BSP_PWR_DCDCGetVoltage(uint32_t PortId); +PWR_DCDCCtrlModeTypeDef BSP_PWR_DCDCGetCtrlMode(uint32_t PortId); +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_USBPD_POWER_Exported_Functions2 Exported Functions based on BSP V2 specification + * @{ + */ +/* Common functions */ +int32_t BSP_USBPD_PWR_Init(uint32_t Instance); + +int32_t BSP_USBPD_PWR_Deinit(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSInit(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSDeInit(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSOn(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSOff(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Fixed(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Variable(uint32_t Instance, + uint32_t VbusTargetMaxInmv, + uint32_t VbusTargetMinInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Battery(uint32_t Instance, + uint32_t VbusTargetMin, + uint32_t VbusTargetMax, + uint32_t OperatingPower, + uint32_t MaxOperatingPower); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_APDO(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + int32_t Delta); + +int32_t BSP_USBPD_PWR_VBUSGetVoltage(uint32_t Instance, uint32_t *pVoltage); + +int32_t BSP_USBPD_PWR_VBUSGetCurrent(uint32_t Instance, int32_t *pCurrent); + +int32_t BSP_USBPD_PWR_VCONNInit(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_VCONNDeInit(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_VCONNOn(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_VCONNOff(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_SetVBUSDisconnectionThreshold(uint32_t Instance, + uint32_t VoltageThreshold); + +int32_t BSP_USBPD_PWR_RegisterVBUSDetectCallback(uint32_t Instance, + USBPD_PWR_VBUSDetectCallbackFunc *pfnVBUSDetectCallback); + +int32_t BSP_USBPD_PWR_VBUSIsOn(uint32_t Instance, uint8_t *pState); + +int32_t BSP_USBPD_PWR_VCONNIsOn(uint32_t Instance, + uint32_t CCPinId, uint8_t *pState); + +int32_t BSP_USBPD_PWR_DCDCGetCtrlMode(uint32_t Instance, USBPD_PWR_DCDCCtrlModeTypeDef *pDCDCCtrl); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0C1E_EVAL_POWER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_sd.c b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_sd.c new file mode 100644 index 0000000..2a0ae7c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_sd.c @@ -0,0 +1,1043 @@ +/** +****************************************************************************** +* @file stm32g0c1e_eval_sd.c +* @author MCD Application Team +* @brief This file provides a set of functions needed to manage the SPI SD +* Card memory mounted on STM32G0C1E-EV board. +* It implements a high level communication layer for read and write +* from/to this memory. The needed STM32G0xx hardware resources (SPI and +* GPIO) are defined in stm32g0c1e_eval.h file, and the initialization is +* performed in SD_IO_Init() function declared in stm32g0c1e_eval.c +* file. +* You can easily tailor this driver to any other development board, +* by just adapting the defines for hardware resources and +* SD_IO_Init() function. +* +* +-------------------------------------------------------+ +* | Pin assignment | +* +-------------------------+---------------+-------------+ +* | STM32G0xx SPI Pins | SD | Pin | +* +-------------------------+---------------+-------------+ +* | SD_SPI_CS_PIN | ChipSelect | 1 | +* | SD_SPI_MOSI_PIN / MOSI | DataIn | 2 | +* | | GND | 3 (0 V) | +* | | VDD | 4 (3.3 V)| +* | SD_SPI_SCK_PIN / SCLK | Clock | 5 | +* | | GND | 6 (0 V) | +* | SD_SPI_MISO_PIN / MISO | DataOut | 7 | +* +-------------------------+---------------+-------------+ +****************************************************************************** +* @attention +* +*

© COPYRIGHT(c) 2020 STMicroelectronics

+* + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause +* +****************************************************************************** +@verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) This driver is used to drive the micro SD external card mounted on STM32G0C1E-EV + evaluation board. + (#) This driver does not need a specific component driver for the micro SD device + to be included with. + + (#) Initialization steps: + (++) Initialize the micro SD card using the SD_Init() function. + (++) To check the SD card presence you can use the function BSP_SD_IsDetected() which + returns the detection status + (++) The function BSP_SD_GetCardInfo() is used to get the micro SD card information + which is stored in the structure "SD_CardInfo". + + (#) Micro SD card operations + (++) The micro SD card can be accessed with read/write block(s) operations once + it is reay for access. The access cand be performed in polling + mode by calling the functions SD_ReadBlocks()/SD_WriteBlocks() + (++) The SD erase block(s) is performed using the function BSP_SD_Erase() with + specifying the number of blocks to erase. + (++) The SD runtime status is returned when calling the function BSP_SD_GetCardInfo(). + + @endverbatim +*/ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0c1e_eval_sd.h" +#include "stm32g0xx_hal.h" +#include "stdlib.h" +#include "string.h" +#include "stdio.h" + +/** @addtogroup BSP +* @{ +*/ + +/** @addtogroup STM32G0C1E_EVAL +* @{ +*/ + +/** @addtogroup STM32G0C1E_EVAL_SD +* @{ +*/ + +/* Private typedef -----------------------------------------------------------*/ + +/** @defgroup STM32G0C1EEVAL_SD_Private_Types_Definitions Types Definitions + * @{ + */ +typedef struct { + uint8_t r1; + uint8_t r2; + uint8_t r3; + uint8_t r4; + uint8_t r5; +} SD_CmdAnswer_typedef; + +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ + +/** @defgroup STM32G0C1E_EVAL_SD_Private_Constants Private Constants +* @{ +*/ +#define SD_DUMMY_BYTE 0xFF + +#define SD_MAX_FRAME_LENGTH 17 /* Length = 16 + 1 */ +#define SD_CMD_LENGTH 6 + +#define SD_MAX_TRY 100 /* Number of try */ + +#define SD_CSD_STRUCT_V1 0x2 /* CSD struct version V1 */ +#define SD_CSD_STRUCT_V2 0x1 /* CSD struct version V2 */ + + +/** + * @brief SD ansewer format + */ +typedef enum { + SD_ANSWER_R1_EXPECTED, + SD_ANSWER_R1B_EXPECTED, + SD_ANSWER_R2_EXPECTED, + SD_ANSWER_R3_EXPECTED, + SD_ANSWER_R4R5_EXPECTED, + SD_ANSWER_R7_EXPECTED, +} SD_Answer_type; + +/** + * @brief Start Data tokens: + * Tokens (necessary because at nop/idle (and CS active) only 0xff is + * on the data/command line) + */ +#define SD_TOKEN_START_DATA_SINGLE_BLOCK_READ 0xFE /* Data token start byte, Start Single Block Read */ +#define SD_TOKEN_START_DATA_MULTIPLE_BLOCK_READ 0xFE /* Data token start byte, Start Multiple Block Read */ +#define SD_TOKEN_START_DATA_SINGLE_BLOCK_WRITE 0xFE /* Data token start byte, Start Single Block Write */ +#define SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE 0xFD /* Data token start byte, Start Multiple Block Write */ +#define SD_TOKEN_STOP_DATA_MULTIPLE_BLOCK_WRITE 0xFD /* Data token stop byte, Stop Multiple Block Write */ + +/** + * @brief Commands: CMDxx = CMD-number | 0x40 + */ +#define SD_CMD_GO_IDLE_STATE 0 /* CMD0 = 0x40 */ +#define SD_CMD_SEND_OP_COND 1 /* CMD1 = 0x41 */ +#define SD_CMD_SEND_IF_COND 8 /* CMD8 = 0x48 */ +#define SD_CMD_SEND_CSD 9 /* CMD9 = 0x49 */ +#define SD_CMD_SEND_CID 10 /* CMD10 = 0x4A */ +#define SD_CMD_STOP_TRANSMISSION 12 /* CMD12 = 0x4C */ +#define SD_CMD_SEND_STATUS 13 /* CMD13 = 0x4D */ +#define SD_CMD_SET_BLOCKLEN 16 /* CMD16 = 0x50 */ +#define SD_CMD_READ_SINGLE_BLOCK 17 /* CMD17 = 0x51 */ +#define SD_CMD_READ_MULT_BLOCK 18 /* CMD18 = 0x52 */ +#define SD_CMD_SET_BLOCK_COUNT 23 /* CMD23 = 0x57 */ +#define SD_CMD_WRITE_SINGLE_BLOCK 24 /* CMD24 = 0x58 */ +#define SD_CMD_WRITE_MULT_BLOCK 25 /* CMD25 = 0x59 */ +#define SD_CMD_PROG_CSD 27 /* CMD27 = 0x5B */ +#define SD_CMD_SET_WRITE_PROT 28 /* CMD28 = 0x5C */ +#define SD_CMD_CLR_WRITE_PROT 29 /* CMD29 = 0x5D */ +#define SD_CMD_SEND_WRITE_PROT 30 /* CMD30 = 0x5E */ +#define SD_CMD_SD_ERASE_GRP_START 32 /* CMD32 = 0x60 */ +#define SD_CMD_SD_ERASE_GRP_END 33 /* CMD33 = 0x61 */ +#define SD_CMD_UNTAG_SECTOR 34 /* CMD34 = 0x62 */ +#define SD_CMD_ERASE_GRP_START 35 /* CMD35 = 0x63 */ +#define SD_CMD_ERASE_GRP_END 36 /* CMD36 = 0x64 */ +#define SD_CMD_UNTAG_ERASE_GROUP 37 /* CMD37 = 0x65 */ +#define SD_CMD_ERASE 38 /* CMD38 = 0x66 */ +#define SD_CMD_SD_APP_OP_COND 41 /* CMD41 = 0x69 */ +#define SD_CMD_APP_CMD 55 /* CMD55 = 0x77 */ +#define SD_CMD_READ_OCR 58 /* CMD55 = 0x79 */ + +/** + * @brief SD responses and error flags + */ +typedef enum +{ + /* R1 answer value */ + SD_R1_NO_ERROR = (0x00), + SD_R1_IN_IDLE_STATE = (0x01), + SD_R1_ERASE_RESET = (0x02), + SD_R1_ILLEGAL_COMMAND = (0x04), + SD_R1_COM_CRC_ERROR = (0x08), + SD_R1_ERASE_SEQUENCE_ERROR= (0x10), + SD_R1_ADDRESS_ERROR = (0x20), + SD_R1_PARAMETER_ERROR = (0x40), + + /* R2 answer value */ + SD_R2_NO_ERROR = 0x00, + SD_R2_CARD_LOCKED = 0x01, + SD_R2_LOCKUNLOCK_ERROR = 0x02, + SD_R2_ERROR = 0x04, + SD_R2_CC_ERROR = 0x08, + SD_R2_CARD_ECC_FAILED = 0x10, + SD_R2_WP_VIOLATION = 0x20, + SD_R2_ERASE_PARAM = 0x40, + SD_R2_OUTOFRANGE = 0x80, + + /** + * @brief Data response error + */ + SD_DATA_OK = (0x05), + SD_DATA_CRC_ERROR = (0x0B), + SD_DATA_WRITE_ERROR = (0x0D), + SD_DATA_OTHER_ERROR = (0xFF) +} SD_Error; + +/** +* @} +*/ + +/* Private macro -------------------------------------------------------------*/ + +/* Private variables ---------------------------------------------------------*/ + +/** @defgroup STM32G0C1E_EVAL_SD_Private_Variables Private Variables +* @{ +*/ +__IO uint8_t SdStatus = SD_NOT_PRESENT; + +/* flag_SDHC : + 0 : Standard capacity + 1 : High capacity +*/ +uint16_t flag_SDHC = 0; + +/** +* @} +*/ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup STM32G0C1E_EVAL_SD_Private_Functions Private Functions +* @{ +*/ +static uint8_t SD_GetCIDRegister(SD_CID* Cid); +static uint8_t SD_GetCSDRegister(SD_CSD* Csd); +static uint8_t SD_GetDataResponse(void); +static uint8_t SD_GoIdleState(void); +static SD_CmdAnswer_typedef SD_SendCmd(uint8_t Cmd, uint32_t Arg, uint8_t Crc, uint8_t Answer); +static uint8_t SD_WaitData(uint8_t data); +static uint8_t SD_ReadData(void); +/** +* @} +*/ + +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup STM32G0C1E_EVAL_SD_Exported_Functions +* @{ +*/ + +/** + * @brief Initializes the SD/SD communication. + * @retval The SD Response: + * - MSD_ERROR: Sequence failed + * - MSD_OK: Sequence succeed + */ +uint8_t BSP_SD_Init(void) +{ + /* Configure IO functionalities for SD pin */ + SD_IO_Init(); + + /* Check SD card detect pin */ + if(BSP_SD_IsDetected()==SD_NOT_PRESENT) + { + SdStatus = SD_NOT_PRESENT; + return MSD_ERROR; + } + else + { + SdStatus = SD_PRESENT; + } + + /* SD initialized and set to SPI mode properly */ + return (SD_GoIdleState()); +} + +/** + * @brief Detects if SD card is correctly plugged in the memory slot or not. + * @retval Returns if SD is detected or not + */ +uint8_t BSP_SD_IsDetected(void) +{ + uint8_t status = SD_PRESENT; + + /* Check SD card detect pin */ + if(HAL_GPIO_ReadPin(SD_DETECT_GPIO_PORT, SD_DETECT_PIN) != GPIO_PIN_RESET) + { + status = SD_NOT_PRESENT; + } + + return status; +} + +/** + * @brief Returns information about specific card. + * @param pCardInfo: Pointer to a SD_CardInfo structure that contains all SD + * card information. + * @retval The SD Response: + * - MSD_ERROR: Sequence failed + * - MSD_OK: Sequence succeed + */ +uint8_t BSP_SD_GetCardInfo(SD_CardInfo *pCardInfo) +{ + uint8_t status; + + status = SD_GetCSDRegister(&(pCardInfo->Csd)); + status|= SD_GetCIDRegister(&(pCardInfo->Cid)); + if(flag_SDHC == 1 ) + { + pCardInfo->LogBlockSize = 512; + pCardInfo->CardBlockSize = 512; + pCardInfo->CardCapacity = (pCardInfo->Csd.version.v2.DeviceSize + 1) * 1024 * pCardInfo->LogBlockSize; + pCardInfo->LogBlockNbr = (pCardInfo->CardCapacity) / (pCardInfo->LogBlockSize); + } + else + { + pCardInfo->CardCapacity = (pCardInfo->Csd.version.v1.DeviceSize + 1) ; + pCardInfo->CardCapacity *= (1 << (pCardInfo->Csd.version.v1.DeviceSizeMul + 2)); + pCardInfo->LogBlockSize = 512; + pCardInfo->CardBlockSize = 1 << (pCardInfo->Csd.RdBlockLen); + pCardInfo->CardCapacity *= pCardInfo->CardBlockSize; + pCardInfo->LogBlockNbr = (pCardInfo->CardCapacity) / (pCardInfo->LogBlockSize); + } + + return status; +} + +/** + * @brief Reads block(s) from a specified address in the SD card, in polling mode. + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param ReadAddr: Address from where data is to be read. The address is counted + * in blocks of 512bytes + * @param NumOfBlocks: Number of SD blocks to read + * @param Timeout: This parameter is used for compatibility with BSP implementation + * @retval SD status + */ +uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout) +{ + uint32_t offset = 0; + uint32_t addr; + uint8_t retr = BSP_SD_ERROR; + uint8_t *ptr = NULL; + SD_CmdAnswer_typedef response; + uint16_t BlockSize = 512; + + /* Send CMD16 (SD_CMD_SET_BLOCKLEN) to set the size of the block and + Check if the SD acknowledged the set block length command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_SET_BLOCKLEN, BlockSize, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if ( response.r1 != SD_R1_NO_ERROR) + { + goto error; + } + + ptr = malloc(sizeof(uint8_t)*BlockSize); + if( ptr == NULL ) + { + goto error; + } + memset(ptr, SD_DUMMY_BYTE, sizeof(uint8_t)*BlockSize); + + /* Initialize the address */ + addr = (ReadAddr * ((flag_SDHC == 1) ? 1 : BlockSize)); + + /* Data transfer */ + while (NumOfBlocks--) + { + /* Send CMD17 (SD_CMD_READ_SINGLE_BLOCK) to read one block */ + /* Check if the SD acknowledged the read block command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_READ_SINGLE_BLOCK, addr, 0xFF, SD_ANSWER_R1_EXPECTED); + if ( response.r1 != SD_R1_NO_ERROR) + { + goto error; + } + + /* Now look for the data token to signify the start of the data */ + if (SD_WaitData(SD_TOKEN_START_DATA_SINGLE_BLOCK_READ) == MSD_OK) + { + /* Read the SD block data : read NumByteToRead data */ + SD_IO_WriteReadData(ptr, (uint8_t*)pData + offset, BlockSize); + + /* Set next read address*/ + offset += BlockSize; + addr = ((flag_SDHC == 1) ? (addr + 1) : (addr + BlockSize)); + + /* get CRC bytes (not really needed by us, but required by SD) */ + SD_IO_WriteByte(SD_DUMMY_BYTE); + SD_IO_WriteByte(SD_DUMMY_BYTE); + } + else + { + goto error; + } + + /* End the command data read cycle */ + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + } + + retr = MSD_OK; + +error : + /* Send dummy byte: 8 Clock pulses of delay */ + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if(ptr != NULL) free(ptr); + + /* Return the response */ + return retr; +} + +/** + * @brief Writes block(s) to a specified address in the SD card, in polling mode. + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param WriteAddr: Address from where data is to be written. The address is counted + * in blocks of 512bytes + * @param NumOfBlocks: Number of SD blocks to write + * @param Timeout: This parameter is used for compatibility with BSP implementation + * @retval SD status + */ +uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout) +{ + uint32_t offset = 0; + uint32_t addr; + uint8_t retr = BSP_SD_ERROR; + uint8_t *ptr = NULL; + SD_CmdAnswer_typedef response; + uint16_t BlockSize = 512; + + /* Send CMD16 (SD_CMD_SET_BLOCKLEN) to set the size of the block and + Check if the SD acknowledged the set block length command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_SET_BLOCKLEN, BlockSize, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if ( response.r1 != SD_R1_NO_ERROR) + { + goto error; + } + + ptr = malloc(sizeof(uint8_t)*BlockSize); + if (ptr == NULL) + { + goto error; + } + + /* Initialize the address */ + addr = (WriteAddr * ((flag_SDHC == 1) ? 1 : BlockSize)); + + /* Data transfer */ + while (NumOfBlocks--) + { + /* Send CMD24 (SD_CMD_WRITE_SINGLE_BLOCK) to write blocks and + Check if the SD acknowledged the write block command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_WRITE_SINGLE_BLOCK, addr, 0xFF, SD_ANSWER_R1_EXPECTED); + if (response.r1 != SD_R1_NO_ERROR) + { + goto error; + } + + /* Send dummy byte for NWR timing : one byte between CMDWRITE and TOKEN */ + SD_IO_WriteByte(SD_DUMMY_BYTE); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Send the data token to signify the start of the data */ + SD_IO_WriteByte(SD_TOKEN_START_DATA_SINGLE_BLOCK_WRITE); + + /* Write the block data to SD */ + SD_IO_WriteReadData((uint8_t*)pData + offset, ptr, BlockSize); + + /* Set next write address */ + offset += BlockSize; + addr = ((flag_SDHC == 1) ? (addr + 1) : (addr + BlockSize)); + + /* Put CRC bytes (not really needed by us, but required by SD) */ + SD_IO_WriteByte(SD_DUMMY_BYTE); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Read data response */ + if (SD_GetDataResponse() != SD_DATA_OK) + { + /* Set response value to failure */ + goto error; + } + + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + } + retr = MSD_OK; + +error : + if(ptr != NULL) free(ptr); + /* Send dummy byte: 8 Clock pulses of delay */ + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Return the response */ + return retr; +} + +/** + * @brief Erases the specified memory area of the given SD card. + * @param StartAddr: Start address in Blocks (Size of a block is 512bytes) + * @param EndAddr: End address in Blocks (Size of a block is 512bytes) + * @retval SD status + */ +uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr) +{ + uint8_t retr = BSP_SD_ERROR; + SD_CmdAnswer_typedef response; + uint16_t BlockSize = 512; + + /* Send CMD32 (Erase group start) and check if the SD acknowledged the erase command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_SD_ERASE_GRP_START, (StartAddr) * (flag_SDHC == 1 ? 1 : BlockSize), 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); if (response.r1 == SD_R1_NO_ERROR) + { + /* Send CMD33 (Erase group end) and Check if the SD acknowledged the erase command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_SD_ERASE_GRP_END, (EndAddr*512) * (flag_SDHC == 1 ? 1 : BlockSize), 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if (response.r1 == SD_R1_NO_ERROR) + { + /* Send CMD38 (Erase) and Check if the SD acknowledged the erase command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_ERASE, 0, 0xFF, SD_ANSWER_R1B_EXPECTED); + if (response.r1 == SD_R1_NO_ERROR) + { + retr = MSD_OK; + } + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + } + } + + /* Return the response */ + return retr; +} + +/** + * @brief Returns the SD status. + * @retval The SD status. + */ +uint8_t BSP_SD_GetCardState(void) +{ + SD_CmdAnswer_typedef retr; + + /* Send CMD13 (SD_SEND_STATUS) to get SD status */ + retr = SD_SendCmd(SD_CMD_SEND_STATUS, 0, 0xFF, SD_ANSWER_R2_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Find SD status according to card state */ + if(( retr.r1 == SD_R1_NO_ERROR) && ( retr.r2 == SD_R2_NO_ERROR)) + { + return MSD_OK; + } + + return BSP_SD_ERROR; +} + +/** + * @brief Reads the SD card SCD register. + * Reading the contents of the CSD register in SPI mode is a simple + * read-block transaction. + * @param Csd: pointer on an SCD register structure + * @retval SD status + */ +uint8_t SD_GetCSDRegister(SD_CSD* Csd) +{ + uint16_t counter = 0; + uint8_t CSD_Tab[16]; + uint8_t retr = BSP_SD_ERROR; + SD_CmdAnswer_typedef response; + + /* Send CMD9 (CSD register) or CMD10(CSD register) and Wait for response in the R1 format (0x00 is no errors) */ + response = SD_SendCmd(SD_CMD_SEND_CSD, 0, 0xFF, SD_ANSWER_R1_EXPECTED); + if(response.r1 == SD_R1_NO_ERROR) + { + if (SD_WaitData(SD_TOKEN_START_DATA_SINGLE_BLOCK_READ) == MSD_OK) + { + for (counter = 0; counter < 16; counter++) + { + /* Store CSD register value on CSD_Tab */ + CSD_Tab[counter] = SD_IO_WriteByte(SD_DUMMY_BYTE); + } + + /* Get CRC bytes (not really needed by us, but required by SD) */ + SD_IO_WriteByte(SD_DUMMY_BYTE); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /************************************************************************* + CSD header decoding + *************************************************************************/ + + /* Byte 0 */ + Csd->CSDStruct = (CSD_Tab[0] & 0xC0) >> 6; + Csd->Reserved1 = CSD_Tab[0] & 0x3F; + + /* Byte 1 */ + Csd->TAAC = CSD_Tab[1]; + + /* Byte 2 */ + Csd->NSAC = CSD_Tab[2]; + + /* Byte 3 */ + Csd->MaxBusClkFrec = CSD_Tab[3]; + + /* Byte 4/5 */ + Csd->CardComdClasses = (CSD_Tab[4] << 4) | ((CSD_Tab[5] & 0xF0) >> 4); + Csd->RdBlockLen = CSD_Tab[5] & 0x0F; + + /* Byte 6 */ + Csd->PartBlockRead = (CSD_Tab[6] & 0x80) >> 7; + Csd->WrBlockMisalign = (CSD_Tab[6] & 0x40) >> 6; + Csd->RdBlockMisalign = (CSD_Tab[6] & 0x20) >> 5; + Csd->DSRImpl = (CSD_Tab[6] & 0x10) >> 4; + + /************************************************************************* + CSD v1/v2 decoding + *************************************************************************/ + + if(flag_SDHC == 0) + { + Csd->version.v1.Reserved1 = ((CSD_Tab[6] & 0x0C) >> 2); + + Csd->version.v1.DeviceSize = ((CSD_Tab[6] & 0x03) << 10) + | (CSD_Tab[7] << 2) + | ((CSD_Tab[8] & 0xC0) >> 6); + Csd->version.v1.MaxRdCurrentVDDMin = (CSD_Tab[8] & 0x38) >> 3; + Csd->version.v1.MaxRdCurrentVDDMax = (CSD_Tab[8] & 0x07); + Csd->version.v1.MaxWrCurrentVDDMin = (CSD_Tab[9] & 0xE0) >> 5; + Csd->version.v1.MaxWrCurrentVDDMax = (CSD_Tab[9] & 0x1C) >> 2; + Csd->version.v1.DeviceSizeMul = ((CSD_Tab[9] & 0x03) << 1) + |((CSD_Tab[10] & 0x80) >> 7); + } + else + { + Csd->version.v2.Reserved1 = ((CSD_Tab[6] & 0x0F) << 2) | ((CSD_Tab[7] & 0xC0) >> 6); + Csd->version.v2.DeviceSize= ((CSD_Tab[7] & 0x3F) << 16) | (CSD_Tab[8] << 8) | CSD_Tab[9]; + Csd->version.v2.Reserved2 = ((CSD_Tab[10] & 0x80) >> 8); + } + + Csd->EraseSingleBlockEnable = (CSD_Tab[10] & 0x40) >> 6; + Csd->EraseSectorSize = ((CSD_Tab[10] & 0x3F) << 1) + |((CSD_Tab[11] & 0x80) >> 7); + Csd->WrProtectGrSize = (CSD_Tab[11] & 0x7F); + Csd->WrProtectGrEnable = (CSD_Tab[12] & 0x80) >> 7; + Csd->Reserved2 = (CSD_Tab[12] & 0x60) >> 5; + Csd->WrSpeedFact = (CSD_Tab[12] & 0x1C) >> 2; + Csd->MaxWrBlockLen = ((CSD_Tab[12] & 0x03) << 2) + |((CSD_Tab[13] & 0xC0) >> 6); + Csd->WriteBlockPartial = (CSD_Tab[13] & 0x20) >> 5; + Csd->Reserved3 = (CSD_Tab[13] & 0x1F); + Csd->FileFormatGrouop = (CSD_Tab[14] & 0x80) >> 7; + Csd->CopyFlag = (CSD_Tab[14] & 0x40) >> 6; + Csd->PermWrProtect = (CSD_Tab[14] & 0x20) >> 5; + Csd->TempWrProtect = (CSD_Tab[14] & 0x10) >> 4; + Csd->FileFormat = (CSD_Tab[14] & 0x0C) >> 2; + Csd->Reserved4 = (CSD_Tab[14] & 0x03); + Csd->crc = (CSD_Tab[15] & 0xFE) >> 1; + Csd->Reserved5 = (CSD_Tab[15] & 0x01); + + retr = MSD_OK; + } + } + + /* Send dummy byte: 8 Clock pulses of delay */ + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Return the response */ + return retr; +} + +/** + * @brief Reads the SD card CID register. + * Reading the contents of the CID register in SPI mode is a simple + * read-block transaction. + * @param Cid: pointer on an CID register structure + * @retval SD status + */ +uint8_t SD_GetCIDRegister(SD_CID* Cid) +{ + uint32_t counter = 0; + uint8_t retr = BSP_SD_ERROR; + uint8_t CID_Tab[16]; + SD_CmdAnswer_typedef response; + + /* Send CMD10 (CID register) and Wait for response in the R1 format (0x00 is no errors) */ + response = SD_SendCmd(SD_CMD_SEND_CID, 0, 0xFF, SD_ANSWER_R1_EXPECTED); + if(response.r1 == SD_R1_NO_ERROR) + { + if(SD_WaitData(SD_TOKEN_START_DATA_SINGLE_BLOCK_READ) == MSD_OK) + { + /* Store CID register value on CID_Tab */ + for (counter = 0; counter < 16; counter++) + { + CID_Tab[counter] = SD_IO_WriteByte(SD_DUMMY_BYTE); + } + + /* Get CRC bytes (not really needed by us, but required by SD) */ + SD_IO_WriteByte(SD_DUMMY_BYTE); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Byte 0 */ + Cid->ManufacturerID = CID_Tab[0]; + + /* Byte 1 */ + Cid->OEM_AppliID = CID_Tab[1] << 8; + + /* Byte 2 */ + Cid->OEM_AppliID |= CID_Tab[2]; + + /* Byte 3 */ + Cid->ProdName1 = CID_Tab[3] << 24; + + /* Byte 4 */ + Cid->ProdName1 |= CID_Tab[4] << 16; + + /* Byte 5 */ + Cid->ProdName1 |= CID_Tab[5] << 8; + + /* Byte 6 */ + Cid->ProdName1 |= CID_Tab[6]; + + /* Byte 7 */ + Cid->ProdName2 = CID_Tab[7]; + + /* Byte 8 */ + Cid->ProdRev = CID_Tab[8]; + + /* Byte 9 */ + Cid->ProdSN = CID_Tab[9] << 24; + + /* Byte 10 */ + Cid->ProdSN |= CID_Tab[10] << 16; + + /* Byte 11 */ + Cid->ProdSN |= CID_Tab[11] << 8; + + /* Byte 12 */ + Cid->ProdSN |= CID_Tab[12]; + + /* Byte 13 */ + Cid->Reserved1 |= (CID_Tab[13] & 0xF0) >> 4; + Cid->ManufactDate = (CID_Tab[13] & 0x0F) << 8; + + /* Byte 14 */ + Cid->ManufactDate |= CID_Tab[14]; + + /* Byte 15 */ + Cid->CID_CRC = (CID_Tab[15] & 0xFE) >> 1; + Cid->Reserved2 = 1; + + retr = MSD_OK; + } + } + + /* Send dummy byte: 8 Clock pulses of delay */ + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Return the response */ + return retr; +} + +/** + * @brief Sends 5 bytes command to the SD card and get response + * @param Cmd: The user expected command to send to SD card. + * @param Arg: The command argument. + * @param Crc: The CRC. + * @param Answer: SD_ANSWER_NOT_EXPECTED or SD_ANSWER_EXPECTED + * @retval SD status + */ +SD_CmdAnswer_typedef SD_SendCmd(uint8_t Cmd, uint32_t Arg, uint8_t Crc, uint8_t Answer) +{ + uint8_t frame[SD_CMD_LENGTH], frameout[SD_CMD_LENGTH]; + SD_CmdAnswer_typedef retr = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; + + /* R1 Length = NCS(0)+ 6 Bytes command + NCR(min1 max8) + 1 Bytes answer + NEC(0) = 15bytes */ + /* R1b identical to R1 + Busy information */ + /* R2 Length = NCS(0)+ 6 Bytes command + NCR(min1 max8) + 2 Bytes answer + NEC(0) = 16bytes */ + + /* Prepare Frame to send */ + frame[0] = (Cmd | 0x40); /* Construct byte 1 */ + frame[1] = (uint8_t)(Arg >> 24); /* Construct byte 2 */ + frame[2] = (uint8_t)(Arg >> 16); /* Construct byte 3 */ + frame[3] = (uint8_t)(Arg >> 8); /* Construct byte 4 */ + frame[4] = (uint8_t)(Arg); /* Construct byte 5 */ + frame[5] = (Crc | 0x01); /* Construct byte 6 */ + + /* Send the command */ + SD_IO_CSState(0); + SD_IO_WriteReadData(frame, frameout, SD_CMD_LENGTH); /* Send the Cmd bytes */ + + switch(Answer) + { + case SD_ANSWER_R1_EXPECTED : + retr.r1 = SD_ReadData(); + break; + case SD_ANSWER_R1B_EXPECTED : + retr.r1 = SD_ReadData(); + retr.r2 = SD_IO_WriteByte(SD_DUMMY_BYTE); + /* Set CS High */ + SD_IO_CSState(1); + HAL_Delay(1); + /* Set CS Low */ + SD_IO_CSState(0); + + /* Wait IO line return 0xFF */ + while (SD_IO_WriteByte(SD_DUMMY_BYTE) != 0xFF); + break; + case SD_ANSWER_R2_EXPECTED : + retr.r1 = SD_ReadData(); + retr.r2 = SD_IO_WriteByte(SD_DUMMY_BYTE); + break; + case SD_ANSWER_R3_EXPECTED : + case SD_ANSWER_R7_EXPECTED : + retr.r1 = SD_ReadData(); + retr.r2 = SD_IO_WriteByte(SD_DUMMY_BYTE); + retr.r3 = SD_IO_WriteByte(SD_DUMMY_BYTE); + retr.r4 = SD_IO_WriteByte(SD_DUMMY_BYTE); + retr.r5 = SD_IO_WriteByte(SD_DUMMY_BYTE); + break; + default : + break; + } + return retr; +} + +/** + * @brief Gets the SD card data response and check the busy flag. + * @retval The SD status: Read data response xxx01 + * - status 010: Data accepted + * - status 101: Data rejected due to a crc error + * - status 110: Data rejected due to a Write error. + * - status 111: Data rejected due to other error. + */ +uint8_t SD_GetDataResponse(void) +{ + uint8_t dataresponse; + uint8_t rvalue = SD_DATA_OTHER_ERROR; + + dataresponse = SD_IO_WriteByte(SD_DUMMY_BYTE); + SD_IO_WriteByte(SD_DUMMY_BYTE); /* read the busy response byte*/ + + /* Mask unused bits */ + switch (dataresponse & 0x1F) + { + case SD_DATA_OK: + rvalue = SD_DATA_OK; + + /* Set CS High */ + SD_IO_CSState(1); + /* Set CS Low */ + SD_IO_CSState(0); + + /* Wait IO line return 0xFF */ + while (SD_IO_WriteByte(SD_DUMMY_BYTE) != 0xFF); + break; + case SD_DATA_CRC_ERROR: + rvalue = SD_DATA_CRC_ERROR; + break; + case SD_DATA_WRITE_ERROR: + rvalue = SD_DATA_WRITE_ERROR; + break; + default: + break; + } + + /* Return response */ + return rvalue; +} + + +/** + * @brief Put the SD in Idle state. + * @retval SD status + */ +uint8_t SD_GoIdleState(void) +{ + SD_CmdAnswer_typedef response; + __IO uint8_t counter = 0; + /* Send CMD0 (SD_CMD_GO_IDLE_STATE) to put SD in SPI mode and + wait for In Idle State Response (R1 Format) equal to 0x01 */ + do { + counter++; + response = SD_SendCmd(SD_CMD_GO_IDLE_STATE, 0, 0x95, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if(counter >= SD_MAX_TRY) + { + return BSP_SD_ERROR; + } + } + while(response.r1 != SD_R1_IN_IDLE_STATE); + + + /* Send CMD8 (SD_CMD_SEND_IF_COND) to check the power supply status + and wait until response (R7 Format) equal to 0xAA and */ + response = SD_SendCmd(SD_CMD_SEND_IF_COND, 0x1AA, 0x87, SD_ANSWER_R7_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if((response.r1 & SD_R1_ILLEGAL_COMMAND) == SD_R1_ILLEGAL_COMMAND) + { + /* initialise card V1 */ + do + { + /* initialise card V1 */ + /* Send CMD55 (SD_CMD_APP_CMD) before any ACMD command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_APP_CMD, 0x00000000, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Send ACMD41 (SD_CMD_SD_APP_OP_COND) to initialize SDHC or SDXC cards: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_SD_APP_OP_COND, 0x00000000, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + } + while(response.r1 == SD_R1_IN_IDLE_STATE); + flag_SDHC = 0; + } + else if(response.r1 == SD_R1_IN_IDLE_STATE) + { + /* initialise card V2 */ + do { + + /* Send CMD55 (SD_CMD_APP_CMD) before any ACMD command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_APP_CMD, 0, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + + /* Send ACMD41 (SD_CMD_SD_APP_OP_COND) to initialize SDHC or SDXC cards: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_SD_APP_OP_COND, 0x40000000, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + } + while(response.r1 == SD_R1_IN_IDLE_STATE); + + if((response.r1 & SD_R1_ILLEGAL_COMMAND) == SD_R1_ILLEGAL_COMMAND) + { + do { + /* Send CMD55 (SD_CMD_APP_CMD) before any ACMD command: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_APP_CMD, 0, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if(response.r1 != SD_R1_IN_IDLE_STATE) + { + return BSP_SD_ERROR; + } + /* Send ACMD41 (SD_CMD_SD_APP_OP_COND) to initialize SDHC or SDXC cards: R1 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_SD_APP_OP_COND, 0x00000000, 0xFF, SD_ANSWER_R1_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + } + while(response.r1 == SD_R1_IN_IDLE_STATE); + } + + /* Send CMD58 (SD_CMD_READ_OCR) to initialize SDHC or SDXC cards: R3 response (0x00: no errors) */ + response = SD_SendCmd(SD_CMD_READ_OCR, 0x00000000, 0xFF, SD_ANSWER_R3_EXPECTED); + SD_IO_CSState(1); + SD_IO_WriteByte(SD_DUMMY_BYTE); + if(response.r1 != SD_R1_NO_ERROR) + { + return BSP_SD_ERROR; + } + flag_SDHC = (response.r2 & 0x40) >> 6; + } + else + { + return BSP_SD_ERROR; + } + + return MSD_OK; +} + +/** + * @brief Waits a data until a value different from SD_DUMMY_BITE + * @retval the value read + */ +uint8_t SD_ReadData(void) +{ + uint8_t timeout = 0x08; + uint8_t readvalue; + + /* Check if response is got or a timeout is happen */ + do { + readvalue = SD_IO_WriteByte(SD_DUMMY_BYTE); + timeout--; + + } while ((readvalue == SD_DUMMY_BYTE) && timeout); + + /* Right response got */ + return readvalue; +} + +/** + * @brief Waits a data from the SD card + * @param data : Expected data from the SD card + * @retval MSD_OK or BSP_SD_TIMEOUT + */ +uint8_t SD_WaitData(uint8_t data) +{ + uint16_t timeout = 0xFFFF; + uint8_t readvalue; + + /* Check if response is got or a timeout is happen */ + + do { + readvalue = SD_IO_WriteByte(SD_DUMMY_BYTE); + timeout--; + } while ((readvalue != data) && timeout); + + if (timeout == 0) + { + /* After time out */ + return BSP_SD_TIMEOUT; + } + + /* Right response got */ + return MSD_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_sd.h b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_sd.h new file mode 100644 index 0000000..5e61d2f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_sd.h @@ -0,0 +1,234 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_sd.h + * @author MCD Application Team + * @brief This file contains the common defines and functions prototypes for + * the STM32G0C1E_EVAL_sd.c driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0C1E_EVAL_SD_H +#define STM32G0C1E_EVAL_SD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0c1e_eval.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_SD STM32G0C1E_EVAL SD + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_SD_Exported_Types Exported Types + * @{ + */ + +/** + * @brief SD status structure definition + */ +enum { + BSP_SD_OK = 0x00, + MSD_OK = 0x00, + BSP_SD_ERROR = 0x01, + MSD_ERROR = 0x01, + BSP_SD_TIMEOUT +}; + +/** + * @brief SD transfer state definition + */ +#define SD_TRANSFER_OK ((uint8_t)0x00) +#define SD_TRANSFER_BUSY ((uint8_t)0x01) +#define SD_TRANSFER_ERROR ((uint8_t)0x02) + +/** + * @} + */ + +/** + * @brief SD status structure definition + */ +typedef struct +{ + uint8_t Reserved1:2; /* Reserved */ + uint16_t DeviceSize:12; /* Device Size */ + uint8_t MaxRdCurrentVDDMin:3; /* Max. read current @ VDD min */ + uint8_t MaxRdCurrentVDDMax:3; /* Max. read current @ VDD max */ + uint8_t MaxWrCurrentVDDMin:3; /* Max. write current @ VDD min */ + uint8_t MaxWrCurrentVDDMax:3; /* Max. write current @ VDD max */ + uint8_t DeviceSizeMul:3; /* Device size multiplier */ +} struct_v1; + + +typedef struct +{ + uint8_t Reserved1:6; /* Reserved */ + uint32_t DeviceSize:22; /* Device Size */ + uint8_t Reserved2:1; /* Reserved */ +} struct_v2; + +/** + * @brief Card Specific Data: CSD Register + */ +typedef struct +{ + /* Header part */ + uint8_t CSDStruct:2; /* CSD structure */ + uint8_t Reserved1:6; /* Reserved */ + uint8_t TAAC:8; /* Data read access-time 1 */ + uint8_t NSAC:8; /* Data read access-time 2 in CLK cycles */ + uint8_t MaxBusClkFrec:8; /* Max. bus clock frequency */ + uint16_t CardComdClasses:12; /* Card command classes */ + uint8_t RdBlockLen:4; /* Max. read data block length */ + uint8_t PartBlockRead:1; /* Partial blocks for read allowed */ + uint8_t WrBlockMisalign:1; /* Write block misalignment */ + uint8_t RdBlockMisalign:1; /* Read block misalignment */ + uint8_t DSRImpl:1; /* DSR implemented */ + + /* v1 or v2 struct */ + union csd_version { + struct_v1 v1; + struct_v2 v2; + } version; + + uint8_t EraseSingleBlockEnable:1; /* Erase single block enable */ + uint8_t EraseSectorSize:7; /* Erase group size multiplier */ + uint8_t WrProtectGrSize:7; /* Write protect group size */ + uint8_t WrProtectGrEnable:1; /* Write protect group enable */ + uint8_t Reserved2:2; /* Reserved */ + uint8_t WrSpeedFact:3; /* Write speed factor */ + uint8_t MaxWrBlockLen:4; /* Max. write data block length */ + uint8_t WriteBlockPartial:1; /* Partial blocks for write allowed */ + uint8_t Reserved3:5; /* Reserved */ + uint8_t FileFormatGrouop:1; /* File format group */ + uint8_t CopyFlag:1; /* Copy flag (OTP) */ + uint8_t PermWrProtect:1; /* Permanent write protection */ + uint8_t TempWrProtect:1; /* Temporary write protection */ + uint8_t FileFormat:2; /* File Format */ + uint8_t Reserved4:2; /* Reserved */ + uint8_t crc:7; /* Reserved */ + uint8_t Reserved5:1; /* always 1*/ + +} SD_CSD; + +/** + * @brief Card Identification Data: CID Register + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /* ManufacturerID */ + __IO uint16_t OEM_AppliID; /* OEM/Application ID */ + __IO uint32_t ProdName1; /* Product Name part1 */ + __IO uint8_t ProdName2; /* Product Name part2*/ + __IO uint8_t ProdRev; /* Product Revision */ + __IO uint32_t ProdSN; /* Product Serial Number */ + __IO uint8_t Reserved1; /* Reserved1 */ + __IO uint16_t ManufactDate; /* Manufacturing Date */ + __IO uint8_t CID_CRC; /* CID CRC */ + __IO uint8_t Reserved2; /* always 1 */ +} SD_CID; + +/** + * @brief SD Card information + */ +typedef struct +{ + SD_CSD Csd; + SD_CID Cid; + uint32_t CardCapacity; /*!< Card Capacity */ + uint32_t CardBlockSize; /*!< Card Block Size */ + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ +} SD_CardInfo; + +/** @defgroup STM32G0C1E_EVAL_SPI_SD_Exported_Constants Exported Constants + * @{ + */ + +/** + * @brief Block Size + */ +#define SD_BLOCK_SIZE 0x200 + +/** + * @brief SD detection on its memory slot + */ +#define SD_PRESENT ((uint8_t)0x01) +#define SD_NOT_PRESENT ((uint8_t)0x00) + +#define SD_DATATIMEOUT ((uint32_t)100000000) + +/** + * @brief SD Card information structure + */ +#define BSP_SD_CardInfo SD_CardInfo + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_SD_Exported_Functions Exported Functions + * @{ + */ +uint8_t BSP_SD_Init(void); +uint8_t BSP_SD_IsDetected(void); +uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout); +uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout); +uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr); +uint8_t BSP_SD_GetCardState(void); +uint8_t BSP_SD_GetCardInfo(SD_CardInfo *pCardInfo); + +/* Link functions for SD Card peripheral */ +void SD_IO_Init(void); +void SD_IO_CSState(uint8_t state); +void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength); +uint8_t SD_IO_WriteByte(uint8_t Data); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0C1E_EVAL_SD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_tsensor.c b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_tsensor.c new file mode 100644 index 0000000..b9e48d5 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_tsensor.c @@ -0,0 +1,167 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_tsensor.c + * @author MCD Application Team + * @brief This file provides a set of functions needed to manage the I2C STLM75 + * temperature sensor mounted on STM32G0C1E-EV board . + * It implements a high level communication layer for read and write + * from/to this sensor. The needed STM32G0xx hardware resources (I2C and + * GPIO) are defined in stm32g0c1e_eval.h file, and the initialization is + * performed in TSENSOR_IO_Init() function declared in stm32g0c1e_eval.c + * file. + * You can easily tailor this driver to any other development board, + * by just adapting the defines for hardware resources and + * TSENSOR_IO_Init() function. + * + * +-----------------------------------------------------------------+ + * | Pin assignment | + * +---------------------------------------+-----------+-------------+ + * | STM32G0xx I2C Pins | STLM75 | Pin | + * +---------------------------------------+-----------+-------------+ + * | STLM75_I2C_SDA_PIN/ SDA | SDA | 1 | + * | STLM75_I2C_SCL_PIN/ SCL | SCL | 2 | + * | STLM75_I2C_SMBUSALERT_PIN/ SMBUS ALERT| OS/INT | 3 | + * | . | GND | 4 (0V) | + * | . | GND | 5 (0V) | + * | . | GND | 6 (0V) | + * | . | GND | 7 (0V) | + * | . | VDD | 8 (3.3V)| + * +---------------------------------------+-----------+-------------+ + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0c1e_eval_tsensor.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL_TSENSOR + * @brief This file includes the STLM75 Temperature Sensor driver of + * STM32G0C1E-EV boards. + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_TSENSOR_Private_Variables Private Variables + * @{ + */ +static TSENSOR_DrvTypeDef *tsensor_drv; +__IO uint16_t TSENSORAddress = 0; + +/** + * @} + */ + +/** @addtogroup STM32G0C1E_EVAL_TSENSOR_Exported_Functions + * @{ + */ + +/** + * @brief Initializes peripherals used by the I2C Temperature Sensor driver. + * @retval TSENSOR status + */ +uint32_t BSP_TSENSOR_Init(void) +{ + uint8_t ret = TSENSOR_ERROR; + TSENSOR_InitTypeDef STLM75_InitStructure; + + /* Temperature Sensor Initialization */ + if(Stlm75Drv.IsReady(TSENSOR_I2C_ADDRESS_A01, TSENSOR_MAX_TRIALS) == HAL_OK) + { + /* Initialize the temperature sensor driver structure */ + TSENSORAddress = TSENSOR_I2C_ADDRESS_A01; + tsensor_drv = &Stlm75Drv; + + ret = TSENSOR_OK; + } + else + { + if(Stlm75Drv.IsReady(TSENSOR_I2C_ADDRESS_A02, TSENSOR_MAX_TRIALS) == HAL_OK) + { + /* Initialize the temperature sensor driver structure */ + TSENSORAddress = TSENSOR_I2C_ADDRESS_A02; + tsensor_drv = &Stlm75Drv; + + ret = TSENSOR_OK; + } + else + { + ret = TSENSOR_ERROR; + } + } + + if (ret == TSENSOR_OK) + { + /* Configure Temperature Sensor : Conversion 9 bits in continuous mode */ + /* Alert outside range Limit Temperature 12° <-> 24°c */ + STLM75_InitStructure.AlertMode = STLM75_INTERRUPT_MODE; + STLM75_InitStructure.ConversionMode = STLM75_CONTINUOUS_MODE; + STLM75_InitStructure.TemperatureLimitHigh = 24; + STLM75_InitStructure.TemperatureLimitLow = 12; + + /* TSENSOR Init */ + tsensor_drv->Init(TSENSORAddress, &STLM75_InitStructure); + + ret = TSENSOR_OK; + } + + return ret; +} + +/** + * @brief Returns the Temperature Sensor status. + * @retval The Temperature Sensor status. + */ +uint8_t BSP_TSENSOR_ReadStatus(void) +{ + return (tsensor_drv->ReadStatus(TSENSORAddress)); +} + +/** + * @brief Read Temperature register of STLM75. + * @retval STLM75 measured temperature value. + */ +float BSP_TSENSOR_ReadTemp(void) +{ + return tsensor_drv->ReadTemp(TSENSORAddress); + +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_tsensor.h b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_tsensor.h new file mode 100644 index 0000000..60a4fbb --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_tsensor.h @@ -0,0 +1,104 @@ +/** + ****************************************************************************** + * @file stm32g0c1e_eval_tsensor.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * stm32g0c1e_eval_tsensor.c firmware driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0C1E_EVAL_TSENSOR_H +#define STM32G0C1E_EVAL_TSENSOR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0c1e_eval.h" +#include "../Components/stlm75/stlm75.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32G0C1E_EVAL + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_TSENSOR STM32G0C1E_EVAL TSENSOR + * @{ + */ + +/** @defgroup STM32G0C1E_EVAL_TSENSOR_Exported_Types Exported Types + * @{ + */ + +/** + * @brief TSENSOR Status + */ +typedef enum +{ + TSENSOR_OK = 0, + TSENSOR_ERROR +} TSENSOR_Status_TypDef; + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_TSENSOR_Exported_Constants Exported Constants + * @{ + */ +/* Temperature Sensor hardware I2C address */ +#define TSENSOR_I2C_ADDRESS_A01 0x90 +#define TSENSOR_I2C_ADDRESS_A02 0x92 + +/* Maximum number of trials use for STTS751_IsReady function */ +#define TSENSOR_MAX_TRIALS 50 + +/** + * @} + */ + +/** @defgroup STM32G0C1E_EVAL_TSENSOR_Exported_Functions Exported Functions + * @{ + */ +uint32_t BSP_TSENSOR_Init(void); +uint8_t BSP_TSENSOR_ReadStatus(void); +float BSP_TSENSOR_ReadTemp(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0C1E_EVAL_TSENSOR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g030xx.h b/USB-PD_Provider_1port/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g030xx.h new file mode 100644 index 0000000..cfc9b49 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g030xx.h @@ -0,0 +1,7329 @@ +/** + ****************************************************************************** + * @file stm32g030xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32g030xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g030xx + * @{ + */ + +#ifndef STM32G030xx_H +#define STM32G030xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g030xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 5 and DMAMUX1 Overrun Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + uint32_t RESERVED3[2]; /*!< Reserved3, Address offset: 0x24--0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + uint32_t RESERVED4[2]; /*!< Reserved4, Address offset: 0x34--0x38 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00002000UL) /*!< maximum SRAM size (up to 8 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x007FU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + + + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0x3FUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x0000003F */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger configuration for input line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger configuration for input line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger configuration for input line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger configuration for input line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger configuration for input line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger configuration for input line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger configuration for input line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger configuration for input line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger configuration for input line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger configuration for input line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger configuration for input line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger configuration for input line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger configuration for input line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger configuration for input line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger configuration for input line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger configuration for input line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger configuration for input line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger configuration for input line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger configuration for input line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger configuration for input line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger configuration for input line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger configuration for input line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger configuration for input line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger configuration for input line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger configuration for input line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger configuration for input line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger configuration for input line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger configuration for input line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger configuration for input line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger configuration for input line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ + +/******************* Bit definition for EXTI_RPR1 register ******************/ +#define EXTI_RPR1_RPIF0_Pos (0U) +#define EXTI_RPR1_RPIF0_Msk (0x1UL << EXTI_RPR1_RPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_RPR1_RPIF0 EXTI_RPR1_RPIF0_Msk /*!< Rising Pending Interrupt Flag on line 0 */ +#define EXTI_RPR1_RPIF1_Pos (1U) +#define EXTI_RPR1_RPIF1_Msk (0x1UL << EXTI_RPR1_RPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_RPR1_RPIF1 EXTI_RPR1_RPIF1_Msk /*!< Rising Pending Interrupt Flag on line 1 */ +#define EXTI_RPR1_RPIF2_Pos (2U) +#define EXTI_RPR1_RPIF2_Msk (0x1UL << EXTI_RPR1_RPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_RPR1_RPIF2 EXTI_RPR1_RPIF2_Msk /*!< Rising Pending Interrupt Flag on line 2 */ +#define EXTI_RPR1_RPIF3_Pos (3U) +#define EXTI_RPR1_RPIF3_Msk (0x1UL << EXTI_RPR1_RPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_RPR1_RPIF3 EXTI_RPR1_RPIF3_Msk /*!< Rising Pending Interrupt Flag on line 3 */ +#define EXTI_RPR1_RPIF4_Pos (4U) +#define EXTI_RPR1_RPIF4_Msk (0x1UL << EXTI_RPR1_RPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_RPR1_RPIF4 EXTI_RPR1_RPIF4_Msk /*!< Rising Pending Interrupt Flag on line 4 */ +#define EXTI_RPR1_RPIF5_Pos (5U) +#define EXTI_RPR1_RPIF5_Msk (0x1UL << EXTI_RPR1_RPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_RPR1_RPIF5 EXTI_RPR1_RPIF5_Msk /*!< Rising Pending Interrupt Flag on line 5 */ +#define EXTI_RPR1_RPIF6_Pos (6U) +#define EXTI_RPR1_RPIF6_Msk (0x1UL << EXTI_RPR1_RPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_RPR1_RPIF6 EXTI_RPR1_RPIF6_Msk /*!< Rising Pending Interrupt Flag on line 6 */ +#define EXTI_RPR1_RPIF7_Pos (7U) +#define EXTI_RPR1_RPIF7_Msk (0x1UL << EXTI_RPR1_RPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_RPR1_RPIF7 EXTI_RPR1_RPIF7_Msk /*!< Rising Pending Interrupt Flag on line 7 */ +#define EXTI_RPR1_RPIF8_Pos (8U) +#define EXTI_RPR1_RPIF8_Msk (0x1UL << EXTI_RPR1_RPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_RPR1_RPIF8 EXTI_RPR1_RPIF8_Msk /*!< Rising Pending Interrupt Flag on line 8 */ +#define EXTI_RPR1_RPIF9_Pos (9U) +#define EXTI_RPR1_RPIF9_Msk (0x1UL << EXTI_RPR1_RPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_RPR1_RPIF9 EXTI_RPR1_RPIF9_Msk /*!< Rising Pending Interrupt Flag on line 9 */ +#define EXTI_RPR1_RPIF10_Pos (10U) +#define EXTI_RPR1_RPIF10_Msk (0x1UL << EXTI_RPR1_RPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_RPR1_RPIF10 EXTI_RPR1_RPIF10_Msk /*!< Rising Pending Interrupt Flag on line 10 */ +#define EXTI_RPR1_RPIF11_Pos (11U) +#define EXTI_RPR1_RPIF11_Msk (0x1UL << EXTI_RPR1_RPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_RPR1_RPIF11 EXTI_RPR1_RPIF11_Msk /*!< Rising Pending Interrupt Flag on line 11 */ +#define EXTI_RPR1_RPIF12_Pos (12U) +#define EXTI_RPR1_RPIF12_Msk (0x1UL << EXTI_RPR1_RPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_RPR1_RPIF12 EXTI_RPR1_RPIF12_Msk /*!< Rising Pending Interrupt Flag on line 12 */ +#define EXTI_RPR1_RPIF13_Pos (13U) +#define EXTI_RPR1_RPIF13_Msk (0x1UL << EXTI_RPR1_RPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_RPR1_RPIF13 EXTI_RPR1_RPIF13_Msk /*!< Rising Pending Interrupt Flag on line 13 */ +#define EXTI_RPR1_RPIF14_Pos (14U) +#define EXTI_RPR1_RPIF14_Msk (0x1UL << EXTI_RPR1_RPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_RPR1_RPIF14 EXTI_RPR1_RPIF14_Msk /*!< Rising Pending Interrupt Flag on line 14 */ +#define EXTI_RPR1_RPIF15_Pos (15U) +#define EXTI_RPR1_RPIF15_Msk (0x1UL << EXTI_RPR1_RPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_RPR1_RPIF15 EXTI_RPR1_RPIF15_Msk /*!< Rising Pending Interrupt Flag on line 15 */ + +/******************* Bit definition for EXTI_FPR1 register ******************/ +#define EXTI_FPR1_FPIF0_Pos (0U) +#define EXTI_FPR1_FPIF0_Msk (0x1UL << EXTI_FPR1_FPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_FPR1_FPIF0 EXTI_FPR1_FPIF0_Msk /*!< Falling Pending Interrupt Flag on line 0 */ +#define EXTI_FPR1_FPIF1_Pos (1U) +#define EXTI_FPR1_FPIF1_Msk (0x1UL << EXTI_FPR1_FPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_FPR1_FPIF1 EXTI_FPR1_FPIF1_Msk /*!< Falling Pending Interrupt Flag on line 1 */ +#define EXTI_FPR1_FPIF2_Pos (2U) +#define EXTI_FPR1_FPIF2_Msk (0x1UL << EXTI_FPR1_FPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_FPR1_FPIF2 EXTI_FPR1_FPIF2_Msk /*!< Falling Pending Interrupt Flag on line 2 */ +#define EXTI_FPR1_FPIF3_Pos (3U) +#define EXTI_FPR1_FPIF3_Msk (0x1UL << EXTI_FPR1_FPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_FPR1_FPIF3 EXTI_FPR1_FPIF3_Msk /*!< Falling Pending Interrupt Flag on line 3 */ +#define EXTI_FPR1_FPIF4_Pos (4U) +#define EXTI_FPR1_FPIF4_Msk (0x1UL << EXTI_FPR1_FPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_FPR1_FPIF4 EXTI_FPR1_FPIF4_Msk /*!< Falling Pending Interrupt Flag on line 4 */ +#define EXTI_FPR1_FPIF5_Pos (5U) +#define EXTI_FPR1_FPIF5_Msk (0x1UL << EXTI_FPR1_FPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_FPR1_FPIF5 EXTI_FPR1_FPIF5_Msk /*!< Falling Pending Interrupt Flag on line 5 */ +#define EXTI_FPR1_FPIF6_Pos (6U) +#define EXTI_FPR1_FPIF6_Msk (0x1UL << EXTI_FPR1_FPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_FPR1_FPIF6 EXTI_FPR1_FPIF6_Msk /*!< Falling Pending Interrupt Flag on line 6 */ +#define EXTI_FPR1_FPIF7_Pos (7U) +#define EXTI_FPR1_FPIF7_Msk (0x1UL << EXTI_FPR1_FPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_FPR1_FPIF7 EXTI_FPR1_FPIF7_Msk /*!< Falling Pending Interrupt Flag on line 7 */ +#define EXTI_FPR1_FPIF8_Pos (8U) +#define EXTI_FPR1_FPIF8_Msk (0x1UL << EXTI_FPR1_FPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_FPR1_FPIF8 EXTI_FPR1_FPIF8_Msk /*!< Falling Pending Interrupt Flag on line 8 */ +#define EXTI_FPR1_FPIF9_Pos (9U) +#define EXTI_FPR1_FPIF9_Msk (0x1UL << EXTI_FPR1_FPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_FPR1_FPIF9 EXTI_FPR1_FPIF9_Msk /*!< Falling Pending Interrupt Flag on line 9 */ +#define EXTI_FPR1_FPIF10_Pos (10U) +#define EXTI_FPR1_FPIF10_Msk (0x1UL << EXTI_FPR1_FPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_FPR1_FPIF10 EXTI_FPR1_FPIF10_Msk /*!< Falling Pending Interrupt Flag on line 10 */ +#define EXTI_FPR1_FPIF11_Pos (11U) +#define EXTI_FPR1_FPIF11_Msk (0x1UL << EXTI_FPR1_FPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_FPR1_FPIF11 EXTI_FPR1_FPIF11_Msk /*!< Falling Pending Interrupt Flag on line 11 */ +#define EXTI_FPR1_FPIF12_Pos (12U) +#define EXTI_FPR1_FPIF12_Msk (0x1UL << EXTI_FPR1_FPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_FPR1_FPIF12 EXTI_FPR1_FPIF12_Msk /*!< Falling Pending Interrupt Flag on line 12 */ +#define EXTI_FPR1_FPIF13_Pos (13U) +#define EXTI_FPR1_FPIF13_Msk (0x1UL << EXTI_FPR1_FPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_FPR1_FPIF13 EXTI_FPR1_FPIF13_Msk /*!< Falling Pending Interrupt Flag on line 13 */ +#define EXTI_FPR1_FPIF14_Pos (14U) +#define EXTI_FPR1_FPIF14_Msk (0x1UL << EXTI_FPR1_FPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_FPR1_FPIF14 EXTI_FPR1_FPIF14_Msk /*!< Falling Pending Interrupt Flag on line 14 */ +#define EXTI_FPR1_FPIF15_Pos (15U) +#define EXTI_FPR1_FPIF15_Msk (0x1UL << EXTI_FPR1_FPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_FPR1_FPIF15 EXTI_FPR1_FPIF15_Msk /*!< Falling Pending Interrupt Flag on line 15 */ + +/***************** Bit definition for EXTI_EXTICR1 register **************/ +#define EXTI_EXTICR1_EXTI0_Pos (0U) +#define EXTI_EXTICR1_EXTI0_Msk (0x7UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR1_EXTI0 EXTI_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define EXTI_EXTICR1_EXTI0_0 (0x1UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR1_EXTI0_1 (0x2UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR1_EXTI0_2 (0x4UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR1_EXTI1_Pos (8U) +#define EXTI_EXTICR1_EXTI1_Msk (0x7UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR1_EXTI1 EXTI_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define EXTI_EXTICR1_EXTI1_0 (0x1UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR1_EXTI1_1 (0x2UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR1_EXTI1_2 (0x4UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR1_EXTI2_Pos (16U) +#define EXTI_EXTICR1_EXTI2_Msk (0x7UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR1_EXTI2 EXTI_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define EXTI_EXTICR1_EXTI2_0 (0x1UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR1_EXTI2_1 (0x2UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR1_EXTI2_2 (0x4UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR1_EXTI3_Pos (24U) +#define EXTI_EXTICR1_EXTI3_Msk (0x7UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR1_EXTI3 EXTI_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ +#define EXTI_EXTICR1_EXTI3_0 (0x1UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR1_EXTI3_1 (0x2UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR1_EXTI3_2 (0x4UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR2 register **************/ +#define EXTI_EXTICR2_EXTI4_Pos (0U) +#define EXTI_EXTICR2_EXTI4_Msk (0x7UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR2_EXTI4 EXTI_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define EXTI_EXTICR2_EXTI4_0 (0x1UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR2_EXTI4_1 (0x2UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR2_EXTI4_2 (0x4UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR2_EXTI5_Pos (8U) +#define EXTI_EXTICR2_EXTI5_Msk (0x7UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR2_EXTI5 EXTI_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define EXTI_EXTICR2_EXTI5_0 (0x1UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR2_EXTI5_1 (0x2UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR2_EXTI5_2 (0x4UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR2_EXTI6_Pos (16U) +#define EXTI_EXTICR2_EXTI6_Msk (0x7UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR2_EXTI6 EXTI_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define EXTI_EXTICR2_EXTI6_0 (0x1UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR2_EXTI6_1 (0x2UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR2_EXTI6_2 (0x4UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR2_EXTI7_Pos (24U) +#define EXTI_EXTICR2_EXTI7_Msk (0x7UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR2_EXTI7 EXTI_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ +#define EXTI_EXTICR2_EXTI7_0 (0x1UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR2_EXTI7_1 (0x2UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR2_EXTI7_2 (0x4UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR3 register **************/ +#define EXTI_EXTICR3_EXTI8_Pos (0U) +#define EXTI_EXTICR3_EXTI8_Msk (0x7UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR3_EXTI8 EXTI_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define EXTI_EXTICR3_EXTI8_0 (0x1UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR3_EXTI8_1 (0x2UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR3_EXTI8_2 (0x4UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR3_EXTI9_Pos (8U) +#define EXTI_EXTICR3_EXTI9_Msk (0x7UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR3_EXTI9 EXTI_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define EXTI_EXTICR3_EXTI9_0 (0x1UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR3_EXTI9_1 (0x2UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR3_EXTI9_2 (0x4UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR3_EXTI10_Pos (16U) +#define EXTI_EXTICR3_EXTI10_Msk (0x7UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR3_EXTI10 EXTI_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define EXTI_EXTICR3_EXTI10_0 (0x1UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR3_EXTI10_1 (0x2UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR3_EXTI10_2 (0x4UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR3_EXTI11_Pos (24U) +#define EXTI_EXTICR3_EXTI11_Msk (0x7UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR3_EXTI11 EXTI_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ +#define EXTI_EXTICR3_EXTI11_0 (0x1UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR3_EXTI11_1 (0x2UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR3_EXTI11_2 (0x4UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR4 register **************/ +#define EXTI_EXTICR4_EXTI12_Pos (0U) +#define EXTI_EXTICR4_EXTI12_Msk (0x7UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR4_EXTI12 EXTI_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define EXTI_EXTICR4_EXTI12_0 (0x1UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR4_EXTI12_1 (0x2UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR4_EXTI12_2 (0x4UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR4_EXTI13_Pos (8U) +#define EXTI_EXTICR4_EXTI13_Msk (0x7UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR4_EXTI13 EXTI_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define EXTI_EXTICR4_EXTI13_0 (0x1UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR4_EXTI13_1 (0x2UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR4_EXTI13_2 (0x4UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR4_EXTI14_Pos (16U) +#define EXTI_EXTICR4_EXTI14_Msk (0x7UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR4_EXTI14 EXTI_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define EXTI_EXTICR4_EXTI14_0 (0x1UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR4_EXTI14_1 (0x2UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR4_EXTI14_2 (0x4UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR4_EXTI15_Pos (24U) +#define EXTI_EXTICR4_EXTI15_Msk (0x7UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR4_EXTI15 EXTI_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ +#define EXTI_EXTICR4_EXTI15_0 (0x1UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR4_EXTI15_1 (0x2UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR4_EXTI15_2 (0x4UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x04000000 */ + +/******************* Bit definition for EXTI_IMR1 register ******************/ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< Interrupt Mask on line 31 */ +#define EXTI_IMR1_IM_Pos (0U) +#define EXTI_IMR1_IM_Msk (0x82A8FFFFUL << EXTI_IMR1_IM_Pos) /*!< 0x82A8FFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_IM_Msk /*!< Interrupt Mask All */ + + +/******************* Bit definition for EXTI_EMR1 register ******************/ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< Event Mask on line 19 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< Event Mask on line 21 */ +#define EXTI_EMR1_EM23_Pos (23U) +#define EXTI_EMR1_EM23_Msk (0x1UL << EXTI_EMR1_EM23_Pos) /*!< 0x00800000 */ +#define EXTI_EMR1_EM23 EXTI_EMR1_EM23_Msk /*!< Event Mask on line 23 */ +#define EXTI_EMR1_EM25_Pos (25U) +#define EXTI_EMR1_EM25_Msk (0x1UL << EXTI_EMR1_EM25_Pos) /*!< 0x02000000 */ +#define EXTI_EMR1_EM25 EXTI_EMR1_EM25_Msk /*!< Event Mask on line 25 */ +#define EXTI_EMR1_EM31_Pos (31U) +#define EXTI_EMR1_EM31_Msk (0x1UL << EXTI_EMR1_EM31_Pos) /*!< 0x80000000 */ +#define EXTI_EMR1_EM31 EXTI_EMR1_EM31_Msk /*!< Event Mask on line 31 */ + + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/* Note: No specific macro feature on this device */ + +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk +#define FLASH_ACR_PROGEMPTY_Pos (16U) +#define FLASH_ACR_PROGEMPTY_Msk (0x1UL << FLASH_ACR_PROGEMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_PROGEMPTY FLASH_ACR_PROGEMPTY_Msk + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk +#define FLASH_SR_BSY1_Pos (16U) +#define FLASH_SR_BSY1_Msk (0x1UL << FLASH_SR_BSY1_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY1 FLASH_SR_BSY1_Msk +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk +#define FLASH_CR_MER1_Pos (2U) +#define FLASH_CR_MER1_Msk (0x1UL << FLASH_CR_MER1_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER1 FLASH_CR_MER1_Msk +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0x1FUL << FLASH_CR_PNB_Pos) /*!< 0x000000F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x3FFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x00003FFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk +#define FLASH_OPTR_nRST_STOP_Pos (13U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk +#define FLASH_OPTR_nRST_STDBY_Pos (14U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk +#define FLASH_OPTR_RAM_PARITY_CHECK_Pos (22U) +#define FLASH_OPTR_RAM_PARITY_CHECK_Msk (0x1UL << FLASH_OPTR_RAM_PARITY_CHECK_Pos) /*!< 0x00400000 */ +#define FLASH_OPTR_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK_Msk +#define FLASH_OPTR_nBOOT_SEL_Pos (24U) +#define FLASH_OPTR_nBOOT_SEL_Msk (0x1UL << FLASH_OPTR_nBOOT_SEL_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_nBOOT_SEL FLASH_OPTR_nBOOT_SEL_Msk +#define FLASH_OPTR_nBOOT1_Pos (25U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk +#define FLASH_OPTR_nBOOT0_Pos (26U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk + + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0U) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g031xx + * @{ + */ + +#ifndef STM32G031xx_H +#define STM32G031xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g031xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI line 16 */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 5 and DMAMUX1 Overrun Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + LPTIM1_IRQn = 17, /*!< LPTIM1 global Interrupts */ + LPTIM2_IRQn = 18, /*!< LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + LPUART1_IRQn = 29, /*!< LPUART1 globlal Interrupts (combined with EXTI 28) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED8[17];/*!< Reserved8, Address offset: 0x3C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00002000UL) /*!< maximum SRAM size (up to 8 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x007FU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM2_BASE (APBPERIPH_BASE + 0UL) +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define LPTIM1_BASE (APBPERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APBPERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APBPERIPH_BASE + 0x00009400UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define VREFBUF_BASE (APBPERIPH_BASE + 0x00010030UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + + + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0x3FUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x0000003F */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger configuration for input line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger configuration for input line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger configuration for input line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger configuration for input line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger configuration for input line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger configuration for input line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger configuration for input line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger configuration for input line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger configuration for input line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger configuration for input line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger configuration for input line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger configuration for input line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger configuration for input line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger configuration for input line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger configuration for input line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger configuration for input line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger configuration for input line 16 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger configuration for input line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger configuration for input line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger configuration for input line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger configuration for input line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger configuration for input line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger configuration for input line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger configuration for input line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger configuration for input line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger configuration for input line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger configuration for input line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger configuration for input line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger configuration for input line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger configuration for input line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger configuration for input line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger configuration for input line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger configuration for input line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger configuration for input line 16 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ + +/******************* Bit definition for EXTI_RPR1 register ******************/ +#define EXTI_RPR1_RPIF0_Pos (0U) +#define EXTI_RPR1_RPIF0_Msk (0x1UL << EXTI_RPR1_RPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_RPR1_RPIF0 EXTI_RPR1_RPIF0_Msk /*!< Rising Pending Interrupt Flag on line 0 */ +#define EXTI_RPR1_RPIF1_Pos (1U) +#define EXTI_RPR1_RPIF1_Msk (0x1UL << EXTI_RPR1_RPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_RPR1_RPIF1 EXTI_RPR1_RPIF1_Msk /*!< Rising Pending Interrupt Flag on line 1 */ +#define EXTI_RPR1_RPIF2_Pos (2U) +#define EXTI_RPR1_RPIF2_Msk (0x1UL << EXTI_RPR1_RPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_RPR1_RPIF2 EXTI_RPR1_RPIF2_Msk /*!< Rising Pending Interrupt Flag on line 2 */ +#define EXTI_RPR1_RPIF3_Pos (3U) +#define EXTI_RPR1_RPIF3_Msk (0x1UL << EXTI_RPR1_RPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_RPR1_RPIF3 EXTI_RPR1_RPIF3_Msk /*!< Rising Pending Interrupt Flag on line 3 */ +#define EXTI_RPR1_RPIF4_Pos (4U) +#define EXTI_RPR1_RPIF4_Msk (0x1UL << EXTI_RPR1_RPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_RPR1_RPIF4 EXTI_RPR1_RPIF4_Msk /*!< Rising Pending Interrupt Flag on line 4 */ +#define EXTI_RPR1_RPIF5_Pos (5U) +#define EXTI_RPR1_RPIF5_Msk (0x1UL << EXTI_RPR1_RPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_RPR1_RPIF5 EXTI_RPR1_RPIF5_Msk /*!< Rising Pending Interrupt Flag on line 5 */ +#define EXTI_RPR1_RPIF6_Pos (6U) +#define EXTI_RPR1_RPIF6_Msk (0x1UL << EXTI_RPR1_RPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_RPR1_RPIF6 EXTI_RPR1_RPIF6_Msk /*!< Rising Pending Interrupt Flag on line 6 */ +#define EXTI_RPR1_RPIF7_Pos (7U) +#define EXTI_RPR1_RPIF7_Msk (0x1UL << EXTI_RPR1_RPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_RPR1_RPIF7 EXTI_RPR1_RPIF7_Msk /*!< Rising Pending Interrupt Flag on line 7 */ +#define EXTI_RPR1_RPIF8_Pos (8U) +#define EXTI_RPR1_RPIF8_Msk (0x1UL << EXTI_RPR1_RPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_RPR1_RPIF8 EXTI_RPR1_RPIF8_Msk /*!< Rising Pending Interrupt Flag on line 8 */ +#define EXTI_RPR1_RPIF9_Pos (9U) +#define EXTI_RPR1_RPIF9_Msk (0x1UL << EXTI_RPR1_RPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_RPR1_RPIF9 EXTI_RPR1_RPIF9_Msk /*!< Rising Pending Interrupt Flag on line 9 */ +#define EXTI_RPR1_RPIF10_Pos (10U) +#define EXTI_RPR1_RPIF10_Msk (0x1UL << EXTI_RPR1_RPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_RPR1_RPIF10 EXTI_RPR1_RPIF10_Msk /*!< Rising Pending Interrupt Flag on line 10 */ +#define EXTI_RPR1_RPIF11_Pos (11U) +#define EXTI_RPR1_RPIF11_Msk (0x1UL << EXTI_RPR1_RPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_RPR1_RPIF11 EXTI_RPR1_RPIF11_Msk /*!< Rising Pending Interrupt Flag on line 11 */ +#define EXTI_RPR1_RPIF12_Pos (12U) +#define EXTI_RPR1_RPIF12_Msk (0x1UL << EXTI_RPR1_RPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_RPR1_RPIF12 EXTI_RPR1_RPIF12_Msk /*!< Rising Pending Interrupt Flag on line 12 */ +#define EXTI_RPR1_RPIF13_Pos (13U) +#define EXTI_RPR1_RPIF13_Msk (0x1UL << EXTI_RPR1_RPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_RPR1_RPIF13 EXTI_RPR1_RPIF13_Msk /*!< Rising Pending Interrupt Flag on line 13 */ +#define EXTI_RPR1_RPIF14_Pos (14U) +#define EXTI_RPR1_RPIF14_Msk (0x1UL << EXTI_RPR1_RPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_RPR1_RPIF14 EXTI_RPR1_RPIF14_Msk /*!< Rising Pending Interrupt Flag on line 14 */ +#define EXTI_RPR1_RPIF15_Pos (15U) +#define EXTI_RPR1_RPIF15_Msk (0x1UL << EXTI_RPR1_RPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_RPR1_RPIF15 EXTI_RPR1_RPIF15_Msk /*!< Rising Pending Interrupt Flag on line 15 */ +#define EXTI_RPR1_RPIF16_Pos (16U) +#define EXTI_RPR1_RPIF16_Msk (0x1UL << EXTI_RPR1_RPIF16_Pos) /*!< 0x00010000 */ +#define EXTI_RPR1_RPIF16 EXTI_RPR1_RPIF16_Msk /*!< Rising Pending Interrupt Flag on line 16 */ + +/******************* Bit definition for EXTI_FPR1 register ******************/ +#define EXTI_FPR1_FPIF0_Pos (0U) +#define EXTI_FPR1_FPIF0_Msk (0x1UL << EXTI_FPR1_FPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_FPR1_FPIF0 EXTI_FPR1_FPIF0_Msk /*!< Falling Pending Interrupt Flag on line 0 */ +#define EXTI_FPR1_FPIF1_Pos (1U) +#define EXTI_FPR1_FPIF1_Msk (0x1UL << EXTI_FPR1_FPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_FPR1_FPIF1 EXTI_FPR1_FPIF1_Msk /*!< Falling Pending Interrupt Flag on line 1 */ +#define EXTI_FPR1_FPIF2_Pos (2U) +#define EXTI_FPR1_FPIF2_Msk (0x1UL << EXTI_FPR1_FPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_FPR1_FPIF2 EXTI_FPR1_FPIF2_Msk /*!< Falling Pending Interrupt Flag on line 2 */ +#define EXTI_FPR1_FPIF3_Pos (3U) +#define EXTI_FPR1_FPIF3_Msk (0x1UL << EXTI_FPR1_FPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_FPR1_FPIF3 EXTI_FPR1_FPIF3_Msk /*!< Falling Pending Interrupt Flag on line 3 */ +#define EXTI_FPR1_FPIF4_Pos (4U) +#define EXTI_FPR1_FPIF4_Msk (0x1UL << EXTI_FPR1_FPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_FPR1_FPIF4 EXTI_FPR1_FPIF4_Msk /*!< Falling Pending Interrupt Flag on line 4 */ +#define EXTI_FPR1_FPIF5_Pos (5U) +#define EXTI_FPR1_FPIF5_Msk (0x1UL << EXTI_FPR1_FPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_FPR1_FPIF5 EXTI_FPR1_FPIF5_Msk /*!< Falling Pending Interrupt Flag on line 5 */ +#define EXTI_FPR1_FPIF6_Pos (6U) +#define EXTI_FPR1_FPIF6_Msk (0x1UL << EXTI_FPR1_FPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_FPR1_FPIF6 EXTI_FPR1_FPIF6_Msk /*!< Falling Pending Interrupt Flag on line 6 */ +#define EXTI_FPR1_FPIF7_Pos (7U) +#define EXTI_FPR1_FPIF7_Msk (0x1UL << EXTI_FPR1_FPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_FPR1_FPIF7 EXTI_FPR1_FPIF7_Msk /*!< Falling Pending Interrupt Flag on line 7 */ +#define EXTI_FPR1_FPIF8_Pos (8U) +#define EXTI_FPR1_FPIF8_Msk (0x1UL << EXTI_FPR1_FPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_FPR1_FPIF8 EXTI_FPR1_FPIF8_Msk /*!< Falling Pending Interrupt Flag on line 8 */ +#define EXTI_FPR1_FPIF9_Pos (9U) +#define EXTI_FPR1_FPIF9_Msk (0x1UL << EXTI_FPR1_FPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_FPR1_FPIF9 EXTI_FPR1_FPIF9_Msk /*!< Falling Pending Interrupt Flag on line 9 */ +#define EXTI_FPR1_FPIF10_Pos (10U) +#define EXTI_FPR1_FPIF10_Msk (0x1UL << EXTI_FPR1_FPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_FPR1_FPIF10 EXTI_FPR1_FPIF10_Msk /*!< Falling Pending Interrupt Flag on line 10 */ +#define EXTI_FPR1_FPIF11_Pos (11U) +#define EXTI_FPR1_FPIF11_Msk (0x1UL << EXTI_FPR1_FPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_FPR1_FPIF11 EXTI_FPR1_FPIF11_Msk /*!< Falling Pending Interrupt Flag on line 11 */ +#define EXTI_FPR1_FPIF12_Pos (12U) +#define EXTI_FPR1_FPIF12_Msk (0x1UL << EXTI_FPR1_FPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_FPR1_FPIF12 EXTI_FPR1_FPIF12_Msk /*!< Falling Pending Interrupt Flag on line 12 */ +#define EXTI_FPR1_FPIF13_Pos (13U) +#define EXTI_FPR1_FPIF13_Msk (0x1UL << EXTI_FPR1_FPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_FPR1_FPIF13 EXTI_FPR1_FPIF13_Msk /*!< Falling Pending Interrupt Flag on line 13 */ +#define EXTI_FPR1_FPIF14_Pos (14U) +#define EXTI_FPR1_FPIF14_Msk (0x1UL << EXTI_FPR1_FPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_FPR1_FPIF14 EXTI_FPR1_FPIF14_Msk /*!< Falling Pending Interrupt Flag on line 14 */ +#define EXTI_FPR1_FPIF15_Pos (15U) +#define EXTI_FPR1_FPIF15_Msk (0x1UL << EXTI_FPR1_FPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_FPR1_FPIF15 EXTI_FPR1_FPIF15_Msk /*!< Falling Pending Interrupt Flag on line 15 */ +#define EXTI_FPR1_FPIF16_Pos (16U) +#define EXTI_FPR1_FPIF16_Msk (0x1UL << EXTI_FPR1_FPIF16_Pos) /*!< 0x00010000 */ +#define EXTI_FPR1_FPIF16 EXTI_FPR1_FPIF16_Msk /*!< Falling Pending Interrupt Flag on line 16 */ + +/***************** Bit definition for EXTI_EXTICR1 register **************/ +#define EXTI_EXTICR1_EXTI0_Pos (0U) +#define EXTI_EXTICR1_EXTI0_Msk (0x7UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR1_EXTI0 EXTI_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define EXTI_EXTICR1_EXTI0_0 (0x1UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR1_EXTI0_1 (0x2UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR1_EXTI0_2 (0x4UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR1_EXTI1_Pos (8U) +#define EXTI_EXTICR1_EXTI1_Msk (0x7UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR1_EXTI1 EXTI_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define EXTI_EXTICR1_EXTI1_0 (0x1UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR1_EXTI1_1 (0x2UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR1_EXTI1_2 (0x4UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR1_EXTI2_Pos (16U) +#define EXTI_EXTICR1_EXTI2_Msk (0x7UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR1_EXTI2 EXTI_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define EXTI_EXTICR1_EXTI2_0 (0x1UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR1_EXTI2_1 (0x2UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR1_EXTI2_2 (0x4UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR1_EXTI3_Pos (24U) +#define EXTI_EXTICR1_EXTI3_Msk (0x7UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR1_EXTI3 EXTI_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ +#define EXTI_EXTICR1_EXTI3_0 (0x1UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR1_EXTI3_1 (0x2UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR1_EXTI3_2 (0x4UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR2 register **************/ +#define EXTI_EXTICR2_EXTI4_Pos (0U) +#define EXTI_EXTICR2_EXTI4_Msk (0x7UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR2_EXTI4 EXTI_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define EXTI_EXTICR2_EXTI4_0 (0x1UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR2_EXTI4_1 (0x2UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR2_EXTI4_2 (0x4UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR2_EXTI5_Pos (8U) +#define EXTI_EXTICR2_EXTI5_Msk (0x7UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR2_EXTI5 EXTI_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define EXTI_EXTICR2_EXTI5_0 (0x1UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR2_EXTI5_1 (0x2UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR2_EXTI5_2 (0x4UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR2_EXTI6_Pos (16U) +#define EXTI_EXTICR2_EXTI6_Msk (0x7UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR2_EXTI6 EXTI_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define EXTI_EXTICR2_EXTI6_0 (0x1UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR2_EXTI6_1 (0x2UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR2_EXTI6_2 (0x4UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR2_EXTI7_Pos (24U) +#define EXTI_EXTICR2_EXTI7_Msk (0x7UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR2_EXTI7 EXTI_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ +#define EXTI_EXTICR2_EXTI7_0 (0x1UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR2_EXTI7_1 (0x2UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR2_EXTI7_2 (0x4UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR3 register **************/ +#define EXTI_EXTICR3_EXTI8_Pos (0U) +#define EXTI_EXTICR3_EXTI8_Msk (0x7UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR3_EXTI8 EXTI_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define EXTI_EXTICR3_EXTI8_0 (0x1UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR3_EXTI8_1 (0x2UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR3_EXTI8_2 (0x4UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR3_EXTI9_Pos (8U) +#define EXTI_EXTICR3_EXTI9_Msk (0x7UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR3_EXTI9 EXTI_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define EXTI_EXTICR3_EXTI9_0 (0x1UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR3_EXTI9_1 (0x2UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR3_EXTI9_2 (0x4UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR3_EXTI10_Pos (16U) +#define EXTI_EXTICR3_EXTI10_Msk (0x7UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR3_EXTI10 EXTI_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define EXTI_EXTICR3_EXTI10_0 (0x1UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR3_EXTI10_1 (0x2UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR3_EXTI10_2 (0x4UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR3_EXTI11_Pos (24U) +#define EXTI_EXTICR3_EXTI11_Msk (0x7UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR3_EXTI11 EXTI_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ +#define EXTI_EXTICR3_EXTI11_0 (0x1UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR3_EXTI11_1 (0x2UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR3_EXTI11_2 (0x4UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR4 register **************/ +#define EXTI_EXTICR4_EXTI12_Pos (0U) +#define EXTI_EXTICR4_EXTI12_Msk (0x7UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR4_EXTI12 EXTI_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define EXTI_EXTICR4_EXTI12_0 (0x1UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR4_EXTI12_1 (0x2UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR4_EXTI12_2 (0x4UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR4_EXTI13_Pos (8U) +#define EXTI_EXTICR4_EXTI13_Msk (0x7UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR4_EXTI13 EXTI_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define EXTI_EXTICR4_EXTI13_0 (0x1UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR4_EXTI13_1 (0x2UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR4_EXTI13_2 (0x4UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR4_EXTI14_Pos (16U) +#define EXTI_EXTICR4_EXTI14_Msk (0x7UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR4_EXTI14 EXTI_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define EXTI_EXTICR4_EXTI14_0 (0x1UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR4_EXTI14_1 (0x2UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR4_EXTI14_2 (0x4UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR4_EXTI15_Pos (24U) +#define EXTI_EXTICR4_EXTI15_Msk (0x7UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR4_EXTI15 EXTI_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ +#define EXTI_EXTICR4_EXTI15_0 (0x1UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR4_EXTI15_1 (0x2UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR4_EXTI15_2 (0x4UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x04000000 */ + +/******************* Bit definition for EXTI_IMR1 register ******************/ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM28_Pos (28U) +#define EXTI_IMR1_IM28_Msk (0x1UL << EXTI_IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_IMR1_IM28 EXTI_IMR1_IM28_Msk /*!< Interrupt Mask on line 28 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< Interrupt Mask on line 31 */ +#define EXTI_IMR1_IM_Pos (0U) +#define EXTI_IMR1_IM_Msk (0xF2A9FFFFUL << EXTI_IMR1_IM_Pos) /*!< 0xF2A9FFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_IM_Msk /*!< Interrupt Mask All */ + + +/******************* Bit definition for EXTI_EMR1 register ******************/ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR1_EM16_Pos (16U) +#define EXTI_EMR1_EM16_Msk (0x1UL << EXTI_EMR1_EM16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR1_EM16 EXTI_EMR1_EM16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< Event Mask on line 19 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< Event Mask on line 21 */ +#define EXTI_EMR1_EM23_Pos (23U) +#define EXTI_EMR1_EM23_Msk (0x1UL << EXTI_EMR1_EM23_Pos) /*!< 0x00800000 */ +#define EXTI_EMR1_EM23 EXTI_EMR1_EM23_Msk /*!< Event Mask on line 23 */ +#define EXTI_EMR1_EM25_Pos (25U) +#define EXTI_EMR1_EM25_Msk (0x1UL << EXTI_EMR1_EM25_Pos) /*!< 0x02000000 */ +#define EXTI_EMR1_EM25 EXTI_EMR1_EM25_Msk /*!< Event Mask on line 25 */ +#define EXTI_EMR1_EM28_Pos (28U) +#define EXTI_EMR1_EM28_Msk (0x1UL << EXTI_EMR1_EM28_Pos) /*!< 0x10000000 */ +#define EXTI_EMR1_EM28 EXTI_EMR1_EM28_Msk /*!< Event Mask on line 28 */ +#define EXTI_EMR1_EM29_Pos (29U) +#define EXTI_EMR1_EM29_Msk (0x1UL << EXTI_EMR1_EM29_Pos) /*!< 0x20000000 */ +#define EXTI_EMR1_EM29 EXTI_EMR1_EM29_Msk /*!< Event Mask on line 29 */ +#define EXTI_EMR1_EM30_Pos (30U) +#define EXTI_EMR1_EM30_Msk (0x1UL << EXTI_EMR1_EM30_Pos) /*!< 0x40000000 */ +#define EXTI_EMR1_EM30 EXTI_EMR1_EM30_Msk /*!< Event Mask on line 30 */ +#define EXTI_EMR1_EM31_Pos (31U) +#define EXTI_EMR1_EM31_Msk (0x1UL << EXTI_EMR1_EM31_Pos) /*!< 0x80000000 */ +#define EXTI_EMR1_EM31 EXTI_EMR1_EM31_Msk /*!< Event Mask on line 31 */ + + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +#define GPIO_NRST_CONFIG_SUPPORT /*!< GPIO feature available only on specific devices: Configure NRST pin */ +#define FLASH_SECURABLE_MEMORY_SUPPORT /*!< Flash feature available only on specific devices: allow to secure memory */ +#define FLASH_PCROP_SUPPORT /*!< Flash feature available only on specific devices: proprietary code read protection areas selected by option */ + +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk +#define FLASH_ACR_PROGEMPTY_Pos (16U) +#define FLASH_ACR_PROGEMPTY_Msk (0x1UL << FLASH_ACR_PROGEMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_PROGEMPTY FLASH_ACR_PROGEMPTY_Msk +#define FLASH_ACR_DBG_SWEN_Pos (18U) +#define FLASH_ACR_DBG_SWEN_Msk (0x1UL << FLASH_ACR_DBG_SWEN_Pos) /*!< 0x00040000 */ +#define FLASH_ACR_DBG_SWEN FLASH_ACR_DBG_SWEN_Msk + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk +#define FLASH_SR_BSY1_Pos (16U) +#define FLASH_SR_BSY1_Msk (0x1UL << FLASH_SR_BSY1_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY1 FLASH_SR_BSY1_Msk +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk +#define FLASH_CR_MER1_Pos (2U) +#define FLASH_CR_MER1_Msk (0x1UL << FLASH_CR_MER1_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER1 FLASH_CR_MER1_Msk +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0x1FUL << FLASH_CR_PNB_Pos) /*!< 0x000000F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk +#define FLASH_CR_SEC_PROT_Pos (28U) +#define FLASH_CR_SEC_PROT_Msk (0x1UL << FLASH_CR_SEC_PROT_Pos) /*!< 0x10000000 */ +#define FLASH_CR_SEC_PROT FLASH_CR_SEC_PROT_Msk +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x3FFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x00003FFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk +#define FLASH_OPTR_BOR_EN_Pos (8U) +#define FLASH_OPTR_BOR_EN_Msk (0x1UL << FLASH_OPTR_BOR_EN_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_BOR_EN FLASH_OPTR_BOR_EN_Msk +#define FLASH_OPTR_BORR_LEV_Pos (9U) +#define FLASH_OPTR_BORR_LEV_Msk (0x3UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000600 */ +#define FLASH_OPTR_BORR_LEV FLASH_OPTR_BORR_LEV_Msk +#define FLASH_OPTR_BORR_LEV_0 (0x1UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BORR_LEV_1 (0x2UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BORF_LEV_Pos (11U) +#define FLASH_OPTR_BORF_LEV_Msk (0x3UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00001800 */ +#define FLASH_OPTR_BORF_LEV FLASH_OPTR_BORF_LEV_Msk +#define FLASH_OPTR_BORF_LEV_0 (0x1UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_BORF_LEV_1 (0x2UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP_Pos (13U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk +#define FLASH_OPTR_nRST_STDBY_Pos (14U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk +#define FLASH_OPTR_nRST_SHDW_Pos (15U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00008000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk +#define FLASH_OPTR_RAM_PARITY_CHECK_Pos (22U) +#define FLASH_OPTR_RAM_PARITY_CHECK_Msk (0x1UL << FLASH_OPTR_RAM_PARITY_CHECK_Pos) /*!< 0x00400000 */ +#define FLASH_OPTR_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK_Msk +#define FLASH_OPTR_nBOOT_SEL_Pos (24U) +#define FLASH_OPTR_nBOOT_SEL_Msk (0x1UL << FLASH_OPTR_nBOOT_SEL_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_nBOOT_SEL FLASH_OPTR_nBOOT_SEL_Msk +#define FLASH_OPTR_nBOOT1_Pos (25U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk +#define FLASH_OPTR_nBOOT0_Pos (26U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk +#define FLASH_OPTR_NRST_MODE_Pos (27U) +#define FLASH_OPTR_NRST_MODE_Msk (0x3UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x18000000 */ +#define FLASH_OPTR_NRST_MODE FLASH_OPTR_NRST_MODE_Msk +#define FLASH_OPTR_NRST_MODE_0 (0x1UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_NRST_MODE_1 (0x2UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x10000000 */ +#define FLASH_OPTR_IRHEN_Pos (29U) +#define FLASH_OPTR_IRHEN_Msk (0x1UL << FLASH_OPTR_IRHEN_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_IRHEN FLASH_OPTR_IRHEN_Msk + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x7FUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x7FUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x7FUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x7FUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk + + +/****************** Bits definition for FLASH_SECR register *****************/ +#define FLASH_SECR_SEC_SIZE_Pos (0U) +#define FLASH_SECR_SEC_SIZE_Msk (0x3FUL << FLASH_SECR_SEC_SIZE_Pos) /*!< 0x0000003F */ +#define FLASH_SECR_SEC_SIZE FLASH_SECR_SEC_SIZE_Msk +#define FLASH_SECR_BOOT_LOCK_Pos (16U) +#define FLASH_SECR_BOOT_LOCK_Msk (0x1UL << FLASH_SECR_BOOT_LOCK_Pos) /*!< 0x00010000 */ +#define FLASH_SECR_BOOT_LOCK FLASH_SECR_BOOT_LOCK_Msk + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0U) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g041xx + * @{ + */ + +#ifndef STM32G041xx_H +#define STM32G041xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g041xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI line 16 */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 5 and DMAMUX1 Overrun Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + LPTIM1_IRQn = 17, /*!< LPTIM1 global Interrupts */ + LPTIM2_IRQn = 18, /*!< LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + LPUART1_IRQn = 29, /*!< LPUART1 globlal Interrupts (combined with EXTI 28) */ + AES_RNG_IRQn = 31, /*!< AES & RNG Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED8[17];/*!< Reserved8, Address offset: 0x3C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x5C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00002000UL) /*!< maximum SRAM size (up to 8 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x007FU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM2_BASE (APBPERIPH_BASE + 0UL) +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define LPTIM1_BASE (APBPERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APBPERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APBPERIPH_BASE + 0x00009400UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define VREFBUF_BASE (APBPERIPH_BASE + 0x00010030UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define RNG_BASE (AHBPERIPH_BASE + 0x00005000UL) +#define AES_BASE (AHBPERIPH_BASE + 0x00006000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + +#define AES ((AES_TypeDef *) AES_BASE) +#define AES1 ((AES_TypeDef *) AES_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1UL << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2UL << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1UL << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2UL << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001UL << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002UL << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800UL << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last block of payload. */ +#define AES_CR_NPBLB_0 (0x1UL << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2UL << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4UL << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8UL << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1UL << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2UL << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + + + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0x3FUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x0000003F */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger configuration for input line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger configuration for input line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger configuration for input line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger configuration for input line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger configuration for input line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger configuration for input line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger configuration for input line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger configuration for input line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger configuration for input line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger configuration for input line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger configuration for input line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger configuration for input line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger configuration for input line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger configuration for input line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger configuration for input line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger configuration for input line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger configuration for input line 16 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger configuration for input line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger configuration for input line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger configuration for input line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger configuration for input line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger configuration for input line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger configuration for input line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger configuration for input line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger configuration for input line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger configuration for input line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger configuration for input line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger configuration for input line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger configuration for input line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger configuration for input line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger configuration for input line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger configuration for input line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger configuration for input line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger configuration for input line 16 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ + +/******************* Bit definition for EXTI_RPR1 register ******************/ +#define EXTI_RPR1_RPIF0_Pos (0U) +#define EXTI_RPR1_RPIF0_Msk (0x1UL << EXTI_RPR1_RPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_RPR1_RPIF0 EXTI_RPR1_RPIF0_Msk /*!< Rising Pending Interrupt Flag on line 0 */ +#define EXTI_RPR1_RPIF1_Pos (1U) +#define EXTI_RPR1_RPIF1_Msk (0x1UL << EXTI_RPR1_RPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_RPR1_RPIF1 EXTI_RPR1_RPIF1_Msk /*!< Rising Pending Interrupt Flag on line 1 */ +#define EXTI_RPR1_RPIF2_Pos (2U) +#define EXTI_RPR1_RPIF2_Msk (0x1UL << EXTI_RPR1_RPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_RPR1_RPIF2 EXTI_RPR1_RPIF2_Msk /*!< Rising Pending Interrupt Flag on line 2 */ +#define EXTI_RPR1_RPIF3_Pos (3U) +#define EXTI_RPR1_RPIF3_Msk (0x1UL << EXTI_RPR1_RPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_RPR1_RPIF3 EXTI_RPR1_RPIF3_Msk /*!< Rising Pending Interrupt Flag on line 3 */ +#define EXTI_RPR1_RPIF4_Pos (4U) +#define EXTI_RPR1_RPIF4_Msk (0x1UL << EXTI_RPR1_RPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_RPR1_RPIF4 EXTI_RPR1_RPIF4_Msk /*!< Rising Pending Interrupt Flag on line 4 */ +#define EXTI_RPR1_RPIF5_Pos (5U) +#define EXTI_RPR1_RPIF5_Msk (0x1UL << EXTI_RPR1_RPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_RPR1_RPIF5 EXTI_RPR1_RPIF5_Msk /*!< Rising Pending Interrupt Flag on line 5 */ +#define EXTI_RPR1_RPIF6_Pos (6U) +#define EXTI_RPR1_RPIF6_Msk (0x1UL << EXTI_RPR1_RPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_RPR1_RPIF6 EXTI_RPR1_RPIF6_Msk /*!< Rising Pending Interrupt Flag on line 6 */ +#define EXTI_RPR1_RPIF7_Pos (7U) +#define EXTI_RPR1_RPIF7_Msk (0x1UL << EXTI_RPR1_RPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_RPR1_RPIF7 EXTI_RPR1_RPIF7_Msk /*!< Rising Pending Interrupt Flag on line 7 */ +#define EXTI_RPR1_RPIF8_Pos (8U) +#define EXTI_RPR1_RPIF8_Msk (0x1UL << EXTI_RPR1_RPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_RPR1_RPIF8 EXTI_RPR1_RPIF8_Msk /*!< Rising Pending Interrupt Flag on line 8 */ +#define EXTI_RPR1_RPIF9_Pos (9U) +#define EXTI_RPR1_RPIF9_Msk (0x1UL << EXTI_RPR1_RPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_RPR1_RPIF9 EXTI_RPR1_RPIF9_Msk /*!< Rising Pending Interrupt Flag on line 9 */ +#define EXTI_RPR1_RPIF10_Pos (10U) +#define EXTI_RPR1_RPIF10_Msk (0x1UL << EXTI_RPR1_RPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_RPR1_RPIF10 EXTI_RPR1_RPIF10_Msk /*!< Rising Pending Interrupt Flag on line 10 */ +#define EXTI_RPR1_RPIF11_Pos (11U) +#define EXTI_RPR1_RPIF11_Msk (0x1UL << EXTI_RPR1_RPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_RPR1_RPIF11 EXTI_RPR1_RPIF11_Msk /*!< Rising Pending Interrupt Flag on line 11 */ +#define EXTI_RPR1_RPIF12_Pos (12U) +#define EXTI_RPR1_RPIF12_Msk (0x1UL << EXTI_RPR1_RPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_RPR1_RPIF12 EXTI_RPR1_RPIF12_Msk /*!< Rising Pending Interrupt Flag on line 12 */ +#define EXTI_RPR1_RPIF13_Pos (13U) +#define EXTI_RPR1_RPIF13_Msk (0x1UL << EXTI_RPR1_RPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_RPR1_RPIF13 EXTI_RPR1_RPIF13_Msk /*!< Rising Pending Interrupt Flag on line 13 */ +#define EXTI_RPR1_RPIF14_Pos (14U) +#define EXTI_RPR1_RPIF14_Msk (0x1UL << EXTI_RPR1_RPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_RPR1_RPIF14 EXTI_RPR1_RPIF14_Msk /*!< Rising Pending Interrupt Flag on line 14 */ +#define EXTI_RPR1_RPIF15_Pos (15U) +#define EXTI_RPR1_RPIF15_Msk (0x1UL << EXTI_RPR1_RPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_RPR1_RPIF15 EXTI_RPR1_RPIF15_Msk /*!< Rising Pending Interrupt Flag on line 15 */ +#define EXTI_RPR1_RPIF16_Pos (16U) +#define EXTI_RPR1_RPIF16_Msk (0x1UL << EXTI_RPR1_RPIF16_Pos) /*!< 0x00010000 */ +#define EXTI_RPR1_RPIF16 EXTI_RPR1_RPIF16_Msk /*!< Rising Pending Interrupt Flag on line 16 */ + +/******************* Bit definition for EXTI_FPR1 register ******************/ +#define EXTI_FPR1_FPIF0_Pos (0U) +#define EXTI_FPR1_FPIF0_Msk (0x1UL << EXTI_FPR1_FPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_FPR1_FPIF0 EXTI_FPR1_FPIF0_Msk /*!< Falling Pending Interrupt Flag on line 0 */ +#define EXTI_FPR1_FPIF1_Pos (1U) +#define EXTI_FPR1_FPIF1_Msk (0x1UL << EXTI_FPR1_FPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_FPR1_FPIF1 EXTI_FPR1_FPIF1_Msk /*!< Falling Pending Interrupt Flag on line 1 */ +#define EXTI_FPR1_FPIF2_Pos (2U) +#define EXTI_FPR1_FPIF2_Msk (0x1UL << EXTI_FPR1_FPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_FPR1_FPIF2 EXTI_FPR1_FPIF2_Msk /*!< Falling Pending Interrupt Flag on line 2 */ +#define EXTI_FPR1_FPIF3_Pos (3U) +#define EXTI_FPR1_FPIF3_Msk (0x1UL << EXTI_FPR1_FPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_FPR1_FPIF3 EXTI_FPR1_FPIF3_Msk /*!< Falling Pending Interrupt Flag on line 3 */ +#define EXTI_FPR1_FPIF4_Pos (4U) +#define EXTI_FPR1_FPIF4_Msk (0x1UL << EXTI_FPR1_FPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_FPR1_FPIF4 EXTI_FPR1_FPIF4_Msk /*!< Falling Pending Interrupt Flag on line 4 */ +#define EXTI_FPR1_FPIF5_Pos (5U) +#define EXTI_FPR1_FPIF5_Msk (0x1UL << EXTI_FPR1_FPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_FPR1_FPIF5 EXTI_FPR1_FPIF5_Msk /*!< Falling Pending Interrupt Flag on line 5 */ +#define EXTI_FPR1_FPIF6_Pos (6U) +#define EXTI_FPR1_FPIF6_Msk (0x1UL << EXTI_FPR1_FPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_FPR1_FPIF6 EXTI_FPR1_FPIF6_Msk /*!< Falling Pending Interrupt Flag on line 6 */ +#define EXTI_FPR1_FPIF7_Pos (7U) +#define EXTI_FPR1_FPIF7_Msk (0x1UL << EXTI_FPR1_FPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_FPR1_FPIF7 EXTI_FPR1_FPIF7_Msk /*!< Falling Pending Interrupt Flag on line 7 */ +#define EXTI_FPR1_FPIF8_Pos (8U) +#define EXTI_FPR1_FPIF8_Msk (0x1UL << EXTI_FPR1_FPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_FPR1_FPIF8 EXTI_FPR1_FPIF8_Msk /*!< Falling Pending Interrupt Flag on line 8 */ +#define EXTI_FPR1_FPIF9_Pos (9U) +#define EXTI_FPR1_FPIF9_Msk (0x1UL << EXTI_FPR1_FPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_FPR1_FPIF9 EXTI_FPR1_FPIF9_Msk /*!< Falling Pending Interrupt Flag on line 9 */ +#define EXTI_FPR1_FPIF10_Pos (10U) +#define EXTI_FPR1_FPIF10_Msk (0x1UL << EXTI_FPR1_FPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_FPR1_FPIF10 EXTI_FPR1_FPIF10_Msk /*!< Falling Pending Interrupt Flag on line 10 */ +#define EXTI_FPR1_FPIF11_Pos (11U) +#define EXTI_FPR1_FPIF11_Msk (0x1UL << EXTI_FPR1_FPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_FPR1_FPIF11 EXTI_FPR1_FPIF11_Msk /*!< Falling Pending Interrupt Flag on line 11 */ +#define EXTI_FPR1_FPIF12_Pos (12U) +#define EXTI_FPR1_FPIF12_Msk (0x1UL << EXTI_FPR1_FPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_FPR1_FPIF12 EXTI_FPR1_FPIF12_Msk /*!< Falling Pending Interrupt Flag on line 12 */ +#define EXTI_FPR1_FPIF13_Pos (13U) +#define EXTI_FPR1_FPIF13_Msk (0x1UL << EXTI_FPR1_FPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_FPR1_FPIF13 EXTI_FPR1_FPIF13_Msk /*!< Falling Pending Interrupt Flag on line 13 */ +#define EXTI_FPR1_FPIF14_Pos (14U) +#define EXTI_FPR1_FPIF14_Msk (0x1UL << EXTI_FPR1_FPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_FPR1_FPIF14 EXTI_FPR1_FPIF14_Msk /*!< Falling Pending Interrupt Flag on line 14 */ +#define EXTI_FPR1_FPIF15_Pos (15U) +#define EXTI_FPR1_FPIF15_Msk (0x1UL << EXTI_FPR1_FPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_FPR1_FPIF15 EXTI_FPR1_FPIF15_Msk /*!< Falling Pending Interrupt Flag on line 15 */ +#define EXTI_FPR1_FPIF16_Pos (16U) +#define EXTI_FPR1_FPIF16_Msk (0x1UL << EXTI_FPR1_FPIF16_Pos) /*!< 0x00010000 */ +#define EXTI_FPR1_FPIF16 EXTI_FPR1_FPIF16_Msk /*!< Falling Pending Interrupt Flag on line 16 */ + +/***************** Bit definition for EXTI_EXTICR1 register **************/ +#define EXTI_EXTICR1_EXTI0_Pos (0U) +#define EXTI_EXTICR1_EXTI0_Msk (0x7UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR1_EXTI0 EXTI_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define EXTI_EXTICR1_EXTI0_0 (0x1UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR1_EXTI0_1 (0x2UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR1_EXTI0_2 (0x4UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR1_EXTI1_Pos (8U) +#define EXTI_EXTICR1_EXTI1_Msk (0x7UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR1_EXTI1 EXTI_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define EXTI_EXTICR1_EXTI1_0 (0x1UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR1_EXTI1_1 (0x2UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR1_EXTI1_2 (0x4UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR1_EXTI2_Pos (16U) +#define EXTI_EXTICR1_EXTI2_Msk (0x7UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR1_EXTI2 EXTI_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define EXTI_EXTICR1_EXTI2_0 (0x1UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR1_EXTI2_1 (0x2UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR1_EXTI2_2 (0x4UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR1_EXTI3_Pos (24U) +#define EXTI_EXTICR1_EXTI3_Msk (0x7UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR1_EXTI3 EXTI_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ +#define EXTI_EXTICR1_EXTI3_0 (0x1UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR1_EXTI3_1 (0x2UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR1_EXTI3_2 (0x4UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR2 register **************/ +#define EXTI_EXTICR2_EXTI4_Pos (0U) +#define EXTI_EXTICR2_EXTI4_Msk (0x7UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR2_EXTI4 EXTI_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define EXTI_EXTICR2_EXTI4_0 (0x1UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR2_EXTI4_1 (0x2UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR2_EXTI4_2 (0x4UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR2_EXTI5_Pos (8U) +#define EXTI_EXTICR2_EXTI5_Msk (0x7UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR2_EXTI5 EXTI_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define EXTI_EXTICR2_EXTI5_0 (0x1UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR2_EXTI5_1 (0x2UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR2_EXTI5_2 (0x4UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR2_EXTI6_Pos (16U) +#define EXTI_EXTICR2_EXTI6_Msk (0x7UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR2_EXTI6 EXTI_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define EXTI_EXTICR2_EXTI6_0 (0x1UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR2_EXTI6_1 (0x2UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR2_EXTI6_2 (0x4UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR2_EXTI7_Pos (24U) +#define EXTI_EXTICR2_EXTI7_Msk (0x7UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR2_EXTI7 EXTI_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ +#define EXTI_EXTICR2_EXTI7_0 (0x1UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR2_EXTI7_1 (0x2UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR2_EXTI7_2 (0x4UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR3 register **************/ +#define EXTI_EXTICR3_EXTI8_Pos (0U) +#define EXTI_EXTICR3_EXTI8_Msk (0x7UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR3_EXTI8 EXTI_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define EXTI_EXTICR3_EXTI8_0 (0x1UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR3_EXTI8_1 (0x2UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR3_EXTI8_2 (0x4UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR3_EXTI9_Pos (8U) +#define EXTI_EXTICR3_EXTI9_Msk (0x7UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR3_EXTI9 EXTI_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define EXTI_EXTICR3_EXTI9_0 (0x1UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR3_EXTI9_1 (0x2UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR3_EXTI9_2 (0x4UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR3_EXTI10_Pos (16U) +#define EXTI_EXTICR3_EXTI10_Msk (0x7UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR3_EXTI10 EXTI_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define EXTI_EXTICR3_EXTI10_0 (0x1UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR3_EXTI10_1 (0x2UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR3_EXTI10_2 (0x4UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR3_EXTI11_Pos (24U) +#define EXTI_EXTICR3_EXTI11_Msk (0x7UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR3_EXTI11 EXTI_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ +#define EXTI_EXTICR3_EXTI11_0 (0x1UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR3_EXTI11_1 (0x2UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR3_EXTI11_2 (0x4UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR4 register **************/ +#define EXTI_EXTICR4_EXTI12_Pos (0U) +#define EXTI_EXTICR4_EXTI12_Msk (0x7UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR4_EXTI12 EXTI_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define EXTI_EXTICR4_EXTI12_0 (0x1UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR4_EXTI12_1 (0x2UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR4_EXTI12_2 (0x4UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR4_EXTI13_Pos (8U) +#define EXTI_EXTICR4_EXTI13_Msk (0x7UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR4_EXTI13 EXTI_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define EXTI_EXTICR4_EXTI13_0 (0x1UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR4_EXTI13_1 (0x2UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR4_EXTI13_2 (0x4UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR4_EXTI14_Pos (16U) +#define EXTI_EXTICR4_EXTI14_Msk (0x7UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR4_EXTI14 EXTI_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define EXTI_EXTICR4_EXTI14_0 (0x1UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR4_EXTI14_1 (0x2UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR4_EXTI14_2 (0x4UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR4_EXTI15_Pos (24U) +#define EXTI_EXTICR4_EXTI15_Msk (0x7UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR4_EXTI15 EXTI_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ +#define EXTI_EXTICR4_EXTI15_0 (0x1UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR4_EXTI15_1 (0x2UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR4_EXTI15_2 (0x4UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x04000000 */ + +/******************* Bit definition for EXTI_IMR1 register ******************/ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM28_Pos (28U) +#define EXTI_IMR1_IM28_Msk (0x1UL << EXTI_IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_IMR1_IM28 EXTI_IMR1_IM28_Msk /*!< Interrupt Mask on line 28 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< Interrupt Mask on line 31 */ +#define EXTI_IMR1_IM_Pos (0U) +#define EXTI_IMR1_IM_Msk (0xF2A9FFFFUL << EXTI_IMR1_IM_Pos) /*!< 0xF2A9FFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_IM_Msk /*!< Interrupt Mask All */ + + +/******************* Bit definition for EXTI_EMR1 register ******************/ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR1_EM16_Pos (16U) +#define EXTI_EMR1_EM16_Msk (0x1UL << EXTI_EMR1_EM16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR1_EM16 EXTI_EMR1_EM16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< Event Mask on line 19 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< Event Mask on line 21 */ +#define EXTI_EMR1_EM23_Pos (23U) +#define EXTI_EMR1_EM23_Msk (0x1UL << EXTI_EMR1_EM23_Pos) /*!< 0x00800000 */ +#define EXTI_EMR1_EM23 EXTI_EMR1_EM23_Msk /*!< Event Mask on line 23 */ +#define EXTI_EMR1_EM25_Pos (25U) +#define EXTI_EMR1_EM25_Msk (0x1UL << EXTI_EMR1_EM25_Pos) /*!< 0x02000000 */ +#define EXTI_EMR1_EM25 EXTI_EMR1_EM25_Msk /*!< Event Mask on line 25 */ +#define EXTI_EMR1_EM28_Pos (28U) +#define EXTI_EMR1_EM28_Msk (0x1UL << EXTI_EMR1_EM28_Pos) /*!< 0x10000000 */ +#define EXTI_EMR1_EM28 EXTI_EMR1_EM28_Msk /*!< Event Mask on line 28 */ +#define EXTI_EMR1_EM29_Pos (29U) +#define EXTI_EMR1_EM29_Msk (0x1UL << EXTI_EMR1_EM29_Pos) /*!< 0x20000000 */ +#define EXTI_EMR1_EM29 EXTI_EMR1_EM29_Msk /*!< Event Mask on line 29 */ +#define EXTI_EMR1_EM30_Pos (30U) +#define EXTI_EMR1_EM30_Msk (0x1UL << EXTI_EMR1_EM30_Pos) /*!< 0x40000000 */ +#define EXTI_EMR1_EM30 EXTI_EMR1_EM30_Msk /*!< Event Mask on line 30 */ +#define EXTI_EMR1_EM31_Pos (31U) +#define EXTI_EMR1_EM31_Msk (0x1UL << EXTI_EMR1_EM31_Pos) /*!< 0x80000000 */ +#define EXTI_EMR1_EM31 EXTI_EMR1_EM31_Msk /*!< Event Mask on line 31 */ + + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +#define GPIO_NRST_CONFIG_SUPPORT /*!< GPIO feature available only on specific devices: Configure NRST pin */ +#define FLASH_SECURABLE_MEMORY_SUPPORT /*!< Flash feature available only on specific devices: allow to secure memory */ +#define FLASH_PCROP_SUPPORT /*!< Flash feature available only on specific devices: proprietary code read protection areas selected by option */ + +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk +#define FLASH_ACR_PROGEMPTY_Pos (16U) +#define FLASH_ACR_PROGEMPTY_Msk (0x1UL << FLASH_ACR_PROGEMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_PROGEMPTY FLASH_ACR_PROGEMPTY_Msk +#define FLASH_ACR_DBG_SWEN_Pos (18U) +#define FLASH_ACR_DBG_SWEN_Msk (0x1UL << FLASH_ACR_DBG_SWEN_Pos) /*!< 0x00040000 */ +#define FLASH_ACR_DBG_SWEN FLASH_ACR_DBG_SWEN_Msk + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk +#define FLASH_SR_BSY1_Pos (16U) +#define FLASH_SR_BSY1_Msk (0x1UL << FLASH_SR_BSY1_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY1 FLASH_SR_BSY1_Msk +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk +#define FLASH_CR_MER1_Pos (2U) +#define FLASH_CR_MER1_Msk (0x1UL << FLASH_CR_MER1_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER1 FLASH_CR_MER1_Msk +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0x1FUL << FLASH_CR_PNB_Pos) /*!< 0x000000F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk +#define FLASH_CR_SEC_PROT_Pos (28U) +#define FLASH_CR_SEC_PROT_Msk (0x1UL << FLASH_CR_SEC_PROT_Pos) /*!< 0x10000000 */ +#define FLASH_CR_SEC_PROT FLASH_CR_SEC_PROT_Msk +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x3FFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x00003FFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk +#define FLASH_OPTR_BOR_EN_Pos (8U) +#define FLASH_OPTR_BOR_EN_Msk (0x1UL << FLASH_OPTR_BOR_EN_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_BOR_EN FLASH_OPTR_BOR_EN_Msk +#define FLASH_OPTR_BORR_LEV_Pos (9U) +#define FLASH_OPTR_BORR_LEV_Msk (0x3UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000600 */ +#define FLASH_OPTR_BORR_LEV FLASH_OPTR_BORR_LEV_Msk +#define FLASH_OPTR_BORR_LEV_0 (0x1UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BORR_LEV_1 (0x2UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BORF_LEV_Pos (11U) +#define FLASH_OPTR_BORF_LEV_Msk (0x3UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00001800 */ +#define FLASH_OPTR_BORF_LEV FLASH_OPTR_BORF_LEV_Msk +#define FLASH_OPTR_BORF_LEV_0 (0x1UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_BORF_LEV_1 (0x2UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP_Pos (13U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk +#define FLASH_OPTR_nRST_STDBY_Pos (14U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk +#define FLASH_OPTR_nRST_SHDW_Pos (15U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00008000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk +#define FLASH_OPTR_RAM_PARITY_CHECK_Pos (22U) +#define FLASH_OPTR_RAM_PARITY_CHECK_Msk (0x1UL << FLASH_OPTR_RAM_PARITY_CHECK_Pos) /*!< 0x00400000 */ +#define FLASH_OPTR_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK_Msk +#define FLASH_OPTR_nBOOT_SEL_Pos (24U) +#define FLASH_OPTR_nBOOT_SEL_Msk (0x1UL << FLASH_OPTR_nBOOT_SEL_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_nBOOT_SEL FLASH_OPTR_nBOOT_SEL_Msk +#define FLASH_OPTR_nBOOT1_Pos (25U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk +#define FLASH_OPTR_nBOOT0_Pos (26U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk +#define FLASH_OPTR_NRST_MODE_Pos (27U) +#define FLASH_OPTR_NRST_MODE_Msk (0x3UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x18000000 */ +#define FLASH_OPTR_NRST_MODE FLASH_OPTR_NRST_MODE_Msk +#define FLASH_OPTR_NRST_MODE_0 (0x1UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_NRST_MODE_1 (0x2UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x10000000 */ +#define FLASH_OPTR_IRHEN_Pos (29U) +#define FLASH_OPTR_IRHEN_Msk (0x1UL << FLASH_OPTR_IRHEN_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_IRHEN FLASH_OPTR_IRHEN_Msk + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x7FUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x7FUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x7FUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x7FUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk + + +/****************** Bits definition for FLASH_SECR register *****************/ +#define FLASH_SECR_SEC_SIZE_Pos (0U) +#define FLASH_SECR_SEC_SIZE_Msk (0x3FUL << FLASH_SECR_SEC_SIZE_Pos) /*!< 0x0000003F */ +#define FLASH_SECR_SEC_SIZE FLASH_SECR_SEC_SIZE_Msk +#define FLASH_SECR_BOOT_LOCK_Pos (16U) +#define FLASH_SECR_BOOT_LOCK_Msk (0x1UL << FLASH_SECR_BOOT_LOCK_Pos) /*!< 0x00010000 */ +#define FLASH_SECR_BOOT_LOCK FLASH_SECR_BOOT_LOCK_Msk + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0U) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE31_SR_RNG_Pos (0U) +#define SYSCFG_ITLINE31_SR_RNG_Msk (0x1UL << SYSCFG_ITLINE31_SR_RNG_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE31_SR_RNG SYSCFG_ITLINE31_SR_RNG_Msk /*!< RNG Interrupt */ +#define SYSCFG_ITLINE31_SR_AES_Pos (1U) +#define SYSCFG_ITLINE31_SR_AES_Msk (0x1UL << SYSCFG_ITLINE31_SR_AES_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE31_SR_AES SYSCFG_ITLINE31_SR_AES_Msk /*!< AES Interrupt */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g050xx + * @{ + */ + +#ifndef STM32G050xx_H +#define STM32G050xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g050xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 and DMAMUX1 Overrun Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_IRQn = 17, /*!< TIM6 global Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00004000UL) /*!< maximum SRAM size (up to 16 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x007FU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM6_BASE (APBPERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APBPERIPH_BASE + 0x00001400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM15_BASE (APBPERIPH_BASE + 0x00014000UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + + + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0x3FUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x0000003F */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger configuration for input line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger configuration for input line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger configuration for input line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger configuration for input line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger configuration for input line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger configuration for input line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger configuration for input line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger configuration for input line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger configuration for input line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger configuration for input line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger configuration for input line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger configuration for input line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger configuration for input line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger configuration for input line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger configuration for input line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger configuration for input line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger configuration for input line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger configuration for input line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger configuration for input line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger configuration for input line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger configuration for input line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger configuration for input line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger configuration for input line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger configuration for input line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger configuration for input line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger configuration for input line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger configuration for input line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger configuration for input line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger configuration for input line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger configuration for input line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ + +/******************* Bit definition for EXTI_RPR1 register ******************/ +#define EXTI_RPR1_RPIF0_Pos (0U) +#define EXTI_RPR1_RPIF0_Msk (0x1UL << EXTI_RPR1_RPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_RPR1_RPIF0 EXTI_RPR1_RPIF0_Msk /*!< Rising Pending Interrupt Flag on line 0 */ +#define EXTI_RPR1_RPIF1_Pos (1U) +#define EXTI_RPR1_RPIF1_Msk (0x1UL << EXTI_RPR1_RPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_RPR1_RPIF1 EXTI_RPR1_RPIF1_Msk /*!< Rising Pending Interrupt Flag on line 1 */ +#define EXTI_RPR1_RPIF2_Pos (2U) +#define EXTI_RPR1_RPIF2_Msk (0x1UL << EXTI_RPR1_RPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_RPR1_RPIF2 EXTI_RPR1_RPIF2_Msk /*!< Rising Pending Interrupt Flag on line 2 */ +#define EXTI_RPR1_RPIF3_Pos (3U) +#define EXTI_RPR1_RPIF3_Msk (0x1UL << EXTI_RPR1_RPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_RPR1_RPIF3 EXTI_RPR1_RPIF3_Msk /*!< Rising Pending Interrupt Flag on line 3 */ +#define EXTI_RPR1_RPIF4_Pos (4U) +#define EXTI_RPR1_RPIF4_Msk (0x1UL << EXTI_RPR1_RPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_RPR1_RPIF4 EXTI_RPR1_RPIF4_Msk /*!< Rising Pending Interrupt Flag on line 4 */ +#define EXTI_RPR1_RPIF5_Pos (5U) +#define EXTI_RPR1_RPIF5_Msk (0x1UL << EXTI_RPR1_RPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_RPR1_RPIF5 EXTI_RPR1_RPIF5_Msk /*!< Rising Pending Interrupt Flag on line 5 */ +#define EXTI_RPR1_RPIF6_Pos (6U) +#define EXTI_RPR1_RPIF6_Msk (0x1UL << EXTI_RPR1_RPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_RPR1_RPIF6 EXTI_RPR1_RPIF6_Msk /*!< Rising Pending Interrupt Flag on line 6 */ +#define EXTI_RPR1_RPIF7_Pos (7U) +#define EXTI_RPR1_RPIF7_Msk (0x1UL << EXTI_RPR1_RPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_RPR1_RPIF7 EXTI_RPR1_RPIF7_Msk /*!< Rising Pending Interrupt Flag on line 7 */ +#define EXTI_RPR1_RPIF8_Pos (8U) +#define EXTI_RPR1_RPIF8_Msk (0x1UL << EXTI_RPR1_RPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_RPR1_RPIF8 EXTI_RPR1_RPIF8_Msk /*!< Rising Pending Interrupt Flag on line 8 */ +#define EXTI_RPR1_RPIF9_Pos (9U) +#define EXTI_RPR1_RPIF9_Msk (0x1UL << EXTI_RPR1_RPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_RPR1_RPIF9 EXTI_RPR1_RPIF9_Msk /*!< Rising Pending Interrupt Flag on line 9 */ +#define EXTI_RPR1_RPIF10_Pos (10U) +#define EXTI_RPR1_RPIF10_Msk (0x1UL << EXTI_RPR1_RPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_RPR1_RPIF10 EXTI_RPR1_RPIF10_Msk /*!< Rising Pending Interrupt Flag on line 10 */ +#define EXTI_RPR1_RPIF11_Pos (11U) +#define EXTI_RPR1_RPIF11_Msk (0x1UL << EXTI_RPR1_RPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_RPR1_RPIF11 EXTI_RPR1_RPIF11_Msk /*!< Rising Pending Interrupt Flag on line 11 */ +#define EXTI_RPR1_RPIF12_Pos (12U) +#define EXTI_RPR1_RPIF12_Msk (0x1UL << EXTI_RPR1_RPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_RPR1_RPIF12 EXTI_RPR1_RPIF12_Msk /*!< Rising Pending Interrupt Flag on line 12 */ +#define EXTI_RPR1_RPIF13_Pos (13U) +#define EXTI_RPR1_RPIF13_Msk (0x1UL << EXTI_RPR1_RPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_RPR1_RPIF13 EXTI_RPR1_RPIF13_Msk /*!< Rising Pending Interrupt Flag on line 13 */ +#define EXTI_RPR1_RPIF14_Pos (14U) +#define EXTI_RPR1_RPIF14_Msk (0x1UL << EXTI_RPR1_RPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_RPR1_RPIF14 EXTI_RPR1_RPIF14_Msk /*!< Rising Pending Interrupt Flag on line 14 */ +#define EXTI_RPR1_RPIF15_Pos (15U) +#define EXTI_RPR1_RPIF15_Msk (0x1UL << EXTI_RPR1_RPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_RPR1_RPIF15 EXTI_RPR1_RPIF15_Msk /*!< Rising Pending Interrupt Flag on line 15 */ + +/******************* Bit definition for EXTI_FPR1 register ******************/ +#define EXTI_FPR1_FPIF0_Pos (0U) +#define EXTI_FPR1_FPIF0_Msk (0x1UL << EXTI_FPR1_FPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_FPR1_FPIF0 EXTI_FPR1_FPIF0_Msk /*!< Falling Pending Interrupt Flag on line 0 */ +#define EXTI_FPR1_FPIF1_Pos (1U) +#define EXTI_FPR1_FPIF1_Msk (0x1UL << EXTI_FPR1_FPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_FPR1_FPIF1 EXTI_FPR1_FPIF1_Msk /*!< Falling Pending Interrupt Flag on line 1 */ +#define EXTI_FPR1_FPIF2_Pos (2U) +#define EXTI_FPR1_FPIF2_Msk (0x1UL << EXTI_FPR1_FPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_FPR1_FPIF2 EXTI_FPR1_FPIF2_Msk /*!< Falling Pending Interrupt Flag on line 2 */ +#define EXTI_FPR1_FPIF3_Pos (3U) +#define EXTI_FPR1_FPIF3_Msk (0x1UL << EXTI_FPR1_FPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_FPR1_FPIF3 EXTI_FPR1_FPIF3_Msk /*!< Falling Pending Interrupt Flag on line 3 */ +#define EXTI_FPR1_FPIF4_Pos (4U) +#define EXTI_FPR1_FPIF4_Msk (0x1UL << EXTI_FPR1_FPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_FPR1_FPIF4 EXTI_FPR1_FPIF4_Msk /*!< Falling Pending Interrupt Flag on line 4 */ +#define EXTI_FPR1_FPIF5_Pos (5U) +#define EXTI_FPR1_FPIF5_Msk (0x1UL << EXTI_FPR1_FPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_FPR1_FPIF5 EXTI_FPR1_FPIF5_Msk /*!< Falling Pending Interrupt Flag on line 5 */ +#define EXTI_FPR1_FPIF6_Pos (6U) +#define EXTI_FPR1_FPIF6_Msk (0x1UL << EXTI_FPR1_FPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_FPR1_FPIF6 EXTI_FPR1_FPIF6_Msk /*!< Falling Pending Interrupt Flag on line 6 */ +#define EXTI_FPR1_FPIF7_Pos (7U) +#define EXTI_FPR1_FPIF7_Msk (0x1UL << EXTI_FPR1_FPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_FPR1_FPIF7 EXTI_FPR1_FPIF7_Msk /*!< Falling Pending Interrupt Flag on line 7 */ +#define EXTI_FPR1_FPIF8_Pos (8U) +#define EXTI_FPR1_FPIF8_Msk (0x1UL << EXTI_FPR1_FPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_FPR1_FPIF8 EXTI_FPR1_FPIF8_Msk /*!< Falling Pending Interrupt Flag on line 8 */ +#define EXTI_FPR1_FPIF9_Pos (9U) +#define EXTI_FPR1_FPIF9_Msk (0x1UL << EXTI_FPR1_FPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_FPR1_FPIF9 EXTI_FPR1_FPIF9_Msk /*!< Falling Pending Interrupt Flag on line 9 */ +#define EXTI_FPR1_FPIF10_Pos (10U) +#define EXTI_FPR1_FPIF10_Msk (0x1UL << EXTI_FPR1_FPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_FPR1_FPIF10 EXTI_FPR1_FPIF10_Msk /*!< Falling Pending Interrupt Flag on line 10 */ +#define EXTI_FPR1_FPIF11_Pos (11U) +#define EXTI_FPR1_FPIF11_Msk (0x1UL << EXTI_FPR1_FPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_FPR1_FPIF11 EXTI_FPR1_FPIF11_Msk /*!< Falling Pending Interrupt Flag on line 11 */ +#define EXTI_FPR1_FPIF12_Pos (12U) +#define EXTI_FPR1_FPIF12_Msk (0x1UL << EXTI_FPR1_FPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_FPR1_FPIF12 EXTI_FPR1_FPIF12_Msk /*!< Falling Pending Interrupt Flag on line 12 */ +#define EXTI_FPR1_FPIF13_Pos (13U) +#define EXTI_FPR1_FPIF13_Msk (0x1UL << EXTI_FPR1_FPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_FPR1_FPIF13 EXTI_FPR1_FPIF13_Msk /*!< Falling Pending Interrupt Flag on line 13 */ +#define EXTI_FPR1_FPIF14_Pos (14U) +#define EXTI_FPR1_FPIF14_Msk (0x1UL << EXTI_FPR1_FPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_FPR1_FPIF14 EXTI_FPR1_FPIF14_Msk /*!< Falling Pending Interrupt Flag on line 14 */ +#define EXTI_FPR1_FPIF15_Pos (15U) +#define EXTI_FPR1_FPIF15_Msk (0x1UL << EXTI_FPR1_FPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_FPR1_FPIF15 EXTI_FPR1_FPIF15_Msk /*!< Falling Pending Interrupt Flag on line 15 */ + +/***************** Bit definition for EXTI_EXTICR1 register **************/ +#define EXTI_EXTICR1_EXTI0_Pos (0U) +#define EXTI_EXTICR1_EXTI0_Msk (0x7UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR1_EXTI0 EXTI_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define EXTI_EXTICR1_EXTI0_0 (0x1UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR1_EXTI0_1 (0x2UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR1_EXTI0_2 (0x4UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR1_EXTI1_Pos (8U) +#define EXTI_EXTICR1_EXTI1_Msk (0x7UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR1_EXTI1 EXTI_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define EXTI_EXTICR1_EXTI1_0 (0x1UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR1_EXTI1_1 (0x2UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR1_EXTI1_2 (0x4UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR1_EXTI2_Pos (16U) +#define EXTI_EXTICR1_EXTI2_Msk (0x7UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR1_EXTI2 EXTI_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define EXTI_EXTICR1_EXTI2_0 (0x1UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR1_EXTI2_1 (0x2UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR1_EXTI2_2 (0x4UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR1_EXTI3_Pos (24U) +#define EXTI_EXTICR1_EXTI3_Msk (0x7UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR1_EXTI3 EXTI_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ +#define EXTI_EXTICR1_EXTI3_0 (0x1UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR1_EXTI3_1 (0x2UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR1_EXTI3_2 (0x4UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR2 register **************/ +#define EXTI_EXTICR2_EXTI4_Pos (0U) +#define EXTI_EXTICR2_EXTI4_Msk (0x7UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR2_EXTI4 EXTI_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define EXTI_EXTICR2_EXTI4_0 (0x1UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR2_EXTI4_1 (0x2UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR2_EXTI4_2 (0x4UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR2_EXTI5_Pos (8U) +#define EXTI_EXTICR2_EXTI5_Msk (0x7UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR2_EXTI5 EXTI_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define EXTI_EXTICR2_EXTI5_0 (0x1UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR2_EXTI5_1 (0x2UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR2_EXTI5_2 (0x4UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR2_EXTI6_Pos (16U) +#define EXTI_EXTICR2_EXTI6_Msk (0x7UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR2_EXTI6 EXTI_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define EXTI_EXTICR2_EXTI6_0 (0x1UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR2_EXTI6_1 (0x2UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR2_EXTI6_2 (0x4UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR2_EXTI7_Pos (24U) +#define EXTI_EXTICR2_EXTI7_Msk (0x7UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR2_EXTI7 EXTI_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ +#define EXTI_EXTICR2_EXTI7_0 (0x1UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR2_EXTI7_1 (0x2UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR2_EXTI7_2 (0x4UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR3 register **************/ +#define EXTI_EXTICR3_EXTI8_Pos (0U) +#define EXTI_EXTICR3_EXTI8_Msk (0x7UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR3_EXTI8 EXTI_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define EXTI_EXTICR3_EXTI8_0 (0x1UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR3_EXTI8_1 (0x2UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR3_EXTI8_2 (0x4UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR3_EXTI9_Pos (8U) +#define EXTI_EXTICR3_EXTI9_Msk (0x7UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR3_EXTI9 EXTI_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define EXTI_EXTICR3_EXTI9_0 (0x1UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR3_EXTI9_1 (0x2UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR3_EXTI9_2 (0x4UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR3_EXTI10_Pos (16U) +#define EXTI_EXTICR3_EXTI10_Msk (0x7UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR3_EXTI10 EXTI_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define EXTI_EXTICR3_EXTI10_0 (0x1UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR3_EXTI10_1 (0x2UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR3_EXTI10_2 (0x4UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR3_EXTI11_Pos (24U) +#define EXTI_EXTICR3_EXTI11_Msk (0x7UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR3_EXTI11 EXTI_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ +#define EXTI_EXTICR3_EXTI11_0 (0x1UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR3_EXTI11_1 (0x2UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR3_EXTI11_2 (0x4UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR4 register **************/ +#define EXTI_EXTICR4_EXTI12_Pos (0U) +#define EXTI_EXTICR4_EXTI12_Msk (0x7UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR4_EXTI12 EXTI_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define EXTI_EXTICR4_EXTI12_0 (0x1UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR4_EXTI12_1 (0x2UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR4_EXTI12_2 (0x4UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR4_EXTI13_Pos (8U) +#define EXTI_EXTICR4_EXTI13_Msk (0x7UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR4_EXTI13 EXTI_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define EXTI_EXTICR4_EXTI13_0 (0x1UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR4_EXTI13_1 (0x2UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR4_EXTI13_2 (0x4UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR4_EXTI14_Pos (16U) +#define EXTI_EXTICR4_EXTI14_Msk (0x7UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR4_EXTI14 EXTI_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define EXTI_EXTICR4_EXTI14_0 (0x1UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR4_EXTI14_1 (0x2UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR4_EXTI14_2 (0x4UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR4_EXTI15_Pos (24U) +#define EXTI_EXTICR4_EXTI15_Msk (0x7UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR4_EXTI15 EXTI_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ +#define EXTI_EXTICR4_EXTI15_0 (0x1UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR4_EXTI15_1 (0x2UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR4_EXTI15_2 (0x4UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x04000000 */ + +/******************* Bit definition for EXTI_IMR1 register ******************/ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< Interrupt Mask on line 31 */ +#define EXTI_IMR1_IM_Pos (0U) +#define EXTI_IMR1_IM_Msk (0x82A8FFFFUL << EXTI_IMR1_IM_Pos) /*!< 0x82A8FFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_IM_Msk /*!< Interrupt Mask All */ + + +/******************* Bit definition for EXTI_EMR1 register ******************/ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< Event Mask on line 19 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< Event Mask on line 21 */ +#define EXTI_EMR1_EM23_Pos (23U) +#define EXTI_EMR1_EM23_Msk (0x1UL << EXTI_EMR1_EM23_Pos) /*!< 0x00800000 */ +#define EXTI_EMR1_EM23 EXTI_EMR1_EM23_Msk /*!< Event Mask on line 23 */ +#define EXTI_EMR1_EM25_Pos (25U) +#define EXTI_EMR1_EM25_Msk (0x1UL << EXTI_EMR1_EM25_Pos) /*!< 0x02000000 */ +#define EXTI_EMR1_EM25 EXTI_EMR1_EM25_Msk /*!< Event Mask on line 25 */ +#define EXTI_EMR1_EM31_Pos (31U) +#define EXTI_EMR1_EM31_Msk (0x1UL << EXTI_EMR1_EM31_Pos) /*!< 0x80000000 */ +#define EXTI_EMR1_EM31 EXTI_EMR1_EM31_Msk /*!< Event Mask on line 31 */ + + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/* Note: No specific macro feature on this device */ + +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk +#define FLASH_ACR_PROGEMPTY_Pos (16U) +#define FLASH_ACR_PROGEMPTY_Msk (0x1UL << FLASH_ACR_PROGEMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_PROGEMPTY FLASH_ACR_PROGEMPTY_Msk + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk +#define FLASH_SR_BSY1_Pos (16U) +#define FLASH_SR_BSY1_Msk (0x1UL << FLASH_SR_BSY1_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY1 FLASH_SR_BSY1_Msk +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk +#define FLASH_CR_MER1_Pos (2U) +#define FLASH_CR_MER1_Msk (0x1UL << FLASH_CR_MER1_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER1 FLASH_CR_MER1_Msk +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0x1FUL << FLASH_CR_PNB_Pos) /*!< 0x000000F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x3FFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x00003FFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk +#define FLASH_OPTR_nRST_STOP_Pos (13U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk +#define FLASH_OPTR_nRST_STDBY_Pos (14U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk +#define FLASH_OPTR_RAM_PARITY_CHECK_Pos (22U) +#define FLASH_OPTR_RAM_PARITY_CHECK_Msk (0x1UL << FLASH_OPTR_RAM_PARITY_CHECK_Pos) /*!< 0x00400000 */ +#define FLASH_OPTR_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK_Msk +#define FLASH_OPTR_nBOOT_SEL_Pos (24U) +#define FLASH_OPTR_nBOOT_SEL_Msk (0x1UL << FLASH_OPTR_nBOOT_SEL_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_nBOOT_SEL FLASH_OPTR_nBOOT_SEL_Msk +#define FLASH_OPTR_nBOOT1_Pos (25U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk +#define FLASH_OPTR_nBOOT0_Pos (26U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk + + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0U) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g051xx + * @{ + */ + +#ifndef STM32G051xx_H +#define STM32G051xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g051xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI line 16 */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + LPUART1_IRQn = 29, /*!< LPUART1 globlal Interrupts (combined with EXTI 28) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd, used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even, used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED8[17];/*!< Reserved8, Address offset: 0x3C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00004000UL) /*!< maximum SRAM size (up to 16 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x007FU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM2_BASE (APBPERIPH_BASE + 0UL) +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM6_BASE (APBPERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APBPERIPH_BASE + 0x00001400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define DAC1_BASE (APBPERIPH_BASE + 0x00007400UL) +#define DAC_BASE (APBPERIPH_BASE + 0x00007400UL) /* Kept for legacy purpose */ +#define LPTIM1_BASE (APBPERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APBPERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APBPERIPH_BASE + 0x00009400UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define VREFBUF_BASE (APBPERIPH_BASE + 0x00010030UL) +#define COMP1_BASE (SYSCFG_BASE + 0x0200UL) +#define COMP2_BASE (SYSCFG_BASE + 0x0204UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM15_BASE (APBPERIPH_BASE + 0x00014000UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define DAC_ADDITIONAL_TRIGGERS_SUPPORT + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g061xx + * @{ + */ + +#ifndef STM32G061xx_H +#define STM32G061xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g061xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI line 16 */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + LPUART1_IRQn = 29, /*!< LPUART1 globlal Interrupts (combined with EXTI 28) */ + AES_RNG_IRQn = 31, /*!< AES & RNG Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd, used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even, used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED8[17];/*!< Reserved8, Address offset: 0x3C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x5C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00004000UL) /*!< maximum SRAM size (up to 16 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x007FU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM2_BASE (APBPERIPH_BASE + 0UL) +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM6_BASE (APBPERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APBPERIPH_BASE + 0x00001400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define DAC1_BASE (APBPERIPH_BASE + 0x00007400UL) +#define DAC_BASE (APBPERIPH_BASE + 0x00007400UL) /* Kept for legacy purpose */ +#define LPTIM1_BASE (APBPERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APBPERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APBPERIPH_BASE + 0x00009400UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define VREFBUF_BASE (APBPERIPH_BASE + 0x00010030UL) +#define COMP1_BASE (SYSCFG_BASE + 0x0200UL) +#define COMP2_BASE (SYSCFG_BASE + 0x0204UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM15_BASE (APBPERIPH_BASE + 0x00014000UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define RNG_BASE (AHBPERIPH_BASE + 0x00005000UL) +#define AES_BASE (AHBPERIPH_BASE + 0x00006000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + +#define AES ((AES_TypeDef *) AES_BASE) +#define AES1 ((AES_TypeDef *) AES_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1UL << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2UL << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1UL << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2UL << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001UL << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002UL << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800UL << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last block of payload. */ +#define AES_CR_NPBLB_0 (0x1UL << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2UL << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4UL << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8UL << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1UL << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2UL << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define DAC_ADDITIONAL_TRIGGERS_SUPPORT + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE31_SR_RNG_Pos (0U) +#define SYSCFG_ITLINE31_SR_RNG_Msk (0x1UL << SYSCFG_ITLINE31_SR_RNG_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE31_SR_RNG SYSCFG_ITLINE31_SR_RNG_Msk /*!< RNG Interrupt */ +#define SYSCFG_ITLINE31_SR_AES_Pos (1U) +#define SYSCFG_ITLINE31_SR_AES_Msk (0x1UL << SYSCFG_ITLINE31_SR_AES_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE31_SR_AES SYSCFG_ITLINE31_SR_AES_Msk /*!< AES Interrupt */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g070xx + * @{ + */ + +#ifndef STM32G070xx_H +#define STM32G070xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g070xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 and DMAMUX1 Overrun Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_IRQn = 17, /*!< TIM6 global Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + USART3_4_IRQn = 29, /*!< USART3, USART4 globlal Interrupts */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + uint32_t RESERVED3[2]; /*!< Reserved3, Address offset: 0x24--0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + uint32_t RESERVED4[2]; /*!< Reserved4, Address offset: 0x34--0x38 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00008000UL) /*!< maximum SRAM size (up to 32 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x00FFU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM6_BASE (APBPERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APBPERIPH_BASE + 0x00001400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APBPERIPH_BASE + 0x00004800UL) +#define USART4_BASE (APBPERIPH_BASE + 0x00004C00UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM15_BASE (APBPERIPH_BASE + 0x00014000UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define USART4 ((USART_TypeDef *) USART4_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + + + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0x3FUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x0000003F */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger configuration for input line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger configuration for input line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger configuration for input line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger configuration for input line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger configuration for input line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger configuration for input line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger configuration for input line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger configuration for input line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger configuration for input line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger configuration for input line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger configuration for input line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger configuration for input line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger configuration for input line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger configuration for input line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger configuration for input line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger configuration for input line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger configuration for input line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger configuration for input line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger configuration for input line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger configuration for input line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger configuration for input line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger configuration for input line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger configuration for input line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger configuration for input line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger configuration for input line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger configuration for input line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger configuration for input line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger configuration for input line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger configuration for input line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger configuration for input line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ + +/******************* Bit definition for EXTI_RPR1 register ******************/ +#define EXTI_RPR1_RPIF0_Pos (0U) +#define EXTI_RPR1_RPIF0_Msk (0x1UL << EXTI_RPR1_RPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_RPR1_RPIF0 EXTI_RPR1_RPIF0_Msk /*!< Rising Pending Interrupt Flag on line 0 */ +#define EXTI_RPR1_RPIF1_Pos (1U) +#define EXTI_RPR1_RPIF1_Msk (0x1UL << EXTI_RPR1_RPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_RPR1_RPIF1 EXTI_RPR1_RPIF1_Msk /*!< Rising Pending Interrupt Flag on line 1 */ +#define EXTI_RPR1_RPIF2_Pos (2U) +#define EXTI_RPR1_RPIF2_Msk (0x1UL << EXTI_RPR1_RPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_RPR1_RPIF2 EXTI_RPR1_RPIF2_Msk /*!< Rising Pending Interrupt Flag on line 2 */ +#define EXTI_RPR1_RPIF3_Pos (3U) +#define EXTI_RPR1_RPIF3_Msk (0x1UL << EXTI_RPR1_RPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_RPR1_RPIF3 EXTI_RPR1_RPIF3_Msk /*!< Rising Pending Interrupt Flag on line 3 */ +#define EXTI_RPR1_RPIF4_Pos (4U) +#define EXTI_RPR1_RPIF4_Msk (0x1UL << EXTI_RPR1_RPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_RPR1_RPIF4 EXTI_RPR1_RPIF4_Msk /*!< Rising Pending Interrupt Flag on line 4 */ +#define EXTI_RPR1_RPIF5_Pos (5U) +#define EXTI_RPR1_RPIF5_Msk (0x1UL << EXTI_RPR1_RPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_RPR1_RPIF5 EXTI_RPR1_RPIF5_Msk /*!< Rising Pending Interrupt Flag on line 5 */ +#define EXTI_RPR1_RPIF6_Pos (6U) +#define EXTI_RPR1_RPIF6_Msk (0x1UL << EXTI_RPR1_RPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_RPR1_RPIF6 EXTI_RPR1_RPIF6_Msk /*!< Rising Pending Interrupt Flag on line 6 */ +#define EXTI_RPR1_RPIF7_Pos (7U) +#define EXTI_RPR1_RPIF7_Msk (0x1UL << EXTI_RPR1_RPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_RPR1_RPIF7 EXTI_RPR1_RPIF7_Msk /*!< Rising Pending Interrupt Flag on line 7 */ +#define EXTI_RPR1_RPIF8_Pos (8U) +#define EXTI_RPR1_RPIF8_Msk (0x1UL << EXTI_RPR1_RPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_RPR1_RPIF8 EXTI_RPR1_RPIF8_Msk /*!< Rising Pending Interrupt Flag on line 8 */ +#define EXTI_RPR1_RPIF9_Pos (9U) +#define EXTI_RPR1_RPIF9_Msk (0x1UL << EXTI_RPR1_RPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_RPR1_RPIF9 EXTI_RPR1_RPIF9_Msk /*!< Rising Pending Interrupt Flag on line 9 */ +#define EXTI_RPR1_RPIF10_Pos (10U) +#define EXTI_RPR1_RPIF10_Msk (0x1UL << EXTI_RPR1_RPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_RPR1_RPIF10 EXTI_RPR1_RPIF10_Msk /*!< Rising Pending Interrupt Flag on line 10 */ +#define EXTI_RPR1_RPIF11_Pos (11U) +#define EXTI_RPR1_RPIF11_Msk (0x1UL << EXTI_RPR1_RPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_RPR1_RPIF11 EXTI_RPR1_RPIF11_Msk /*!< Rising Pending Interrupt Flag on line 11 */ +#define EXTI_RPR1_RPIF12_Pos (12U) +#define EXTI_RPR1_RPIF12_Msk (0x1UL << EXTI_RPR1_RPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_RPR1_RPIF12 EXTI_RPR1_RPIF12_Msk /*!< Rising Pending Interrupt Flag on line 12 */ +#define EXTI_RPR1_RPIF13_Pos (13U) +#define EXTI_RPR1_RPIF13_Msk (0x1UL << EXTI_RPR1_RPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_RPR1_RPIF13 EXTI_RPR1_RPIF13_Msk /*!< Rising Pending Interrupt Flag on line 13 */ +#define EXTI_RPR1_RPIF14_Pos (14U) +#define EXTI_RPR1_RPIF14_Msk (0x1UL << EXTI_RPR1_RPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_RPR1_RPIF14 EXTI_RPR1_RPIF14_Msk /*!< Rising Pending Interrupt Flag on line 14 */ +#define EXTI_RPR1_RPIF15_Pos (15U) +#define EXTI_RPR1_RPIF15_Msk (0x1UL << EXTI_RPR1_RPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_RPR1_RPIF15 EXTI_RPR1_RPIF15_Msk /*!< Rising Pending Interrupt Flag on line 15 */ + +/******************* Bit definition for EXTI_FPR1 register ******************/ +#define EXTI_FPR1_FPIF0_Pos (0U) +#define EXTI_FPR1_FPIF0_Msk (0x1UL << EXTI_FPR1_FPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_FPR1_FPIF0 EXTI_FPR1_FPIF0_Msk /*!< Falling Pending Interrupt Flag on line 0 */ +#define EXTI_FPR1_FPIF1_Pos (1U) +#define EXTI_FPR1_FPIF1_Msk (0x1UL << EXTI_FPR1_FPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_FPR1_FPIF1 EXTI_FPR1_FPIF1_Msk /*!< Falling Pending Interrupt Flag on line 1 */ +#define EXTI_FPR1_FPIF2_Pos (2U) +#define EXTI_FPR1_FPIF2_Msk (0x1UL << EXTI_FPR1_FPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_FPR1_FPIF2 EXTI_FPR1_FPIF2_Msk /*!< Falling Pending Interrupt Flag on line 2 */ +#define EXTI_FPR1_FPIF3_Pos (3U) +#define EXTI_FPR1_FPIF3_Msk (0x1UL << EXTI_FPR1_FPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_FPR1_FPIF3 EXTI_FPR1_FPIF3_Msk /*!< Falling Pending Interrupt Flag on line 3 */ +#define EXTI_FPR1_FPIF4_Pos (4U) +#define EXTI_FPR1_FPIF4_Msk (0x1UL << EXTI_FPR1_FPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_FPR1_FPIF4 EXTI_FPR1_FPIF4_Msk /*!< Falling Pending Interrupt Flag on line 4 */ +#define EXTI_FPR1_FPIF5_Pos (5U) +#define EXTI_FPR1_FPIF5_Msk (0x1UL << EXTI_FPR1_FPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_FPR1_FPIF5 EXTI_FPR1_FPIF5_Msk /*!< Falling Pending Interrupt Flag on line 5 */ +#define EXTI_FPR1_FPIF6_Pos (6U) +#define EXTI_FPR1_FPIF6_Msk (0x1UL << EXTI_FPR1_FPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_FPR1_FPIF6 EXTI_FPR1_FPIF6_Msk /*!< Falling Pending Interrupt Flag on line 6 */ +#define EXTI_FPR1_FPIF7_Pos (7U) +#define EXTI_FPR1_FPIF7_Msk (0x1UL << EXTI_FPR1_FPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_FPR1_FPIF7 EXTI_FPR1_FPIF7_Msk /*!< Falling Pending Interrupt Flag on line 7 */ +#define EXTI_FPR1_FPIF8_Pos (8U) +#define EXTI_FPR1_FPIF8_Msk (0x1UL << EXTI_FPR1_FPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_FPR1_FPIF8 EXTI_FPR1_FPIF8_Msk /*!< Falling Pending Interrupt Flag on line 8 */ +#define EXTI_FPR1_FPIF9_Pos (9U) +#define EXTI_FPR1_FPIF9_Msk (0x1UL << EXTI_FPR1_FPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_FPR1_FPIF9 EXTI_FPR1_FPIF9_Msk /*!< Falling Pending Interrupt Flag on line 9 */ +#define EXTI_FPR1_FPIF10_Pos (10U) +#define EXTI_FPR1_FPIF10_Msk (0x1UL << EXTI_FPR1_FPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_FPR1_FPIF10 EXTI_FPR1_FPIF10_Msk /*!< Falling Pending Interrupt Flag on line 10 */ +#define EXTI_FPR1_FPIF11_Pos (11U) +#define EXTI_FPR1_FPIF11_Msk (0x1UL << EXTI_FPR1_FPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_FPR1_FPIF11 EXTI_FPR1_FPIF11_Msk /*!< Falling Pending Interrupt Flag on line 11 */ +#define EXTI_FPR1_FPIF12_Pos (12U) +#define EXTI_FPR1_FPIF12_Msk (0x1UL << EXTI_FPR1_FPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_FPR1_FPIF12 EXTI_FPR1_FPIF12_Msk /*!< Falling Pending Interrupt Flag on line 12 */ +#define EXTI_FPR1_FPIF13_Pos (13U) +#define EXTI_FPR1_FPIF13_Msk (0x1UL << EXTI_FPR1_FPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_FPR1_FPIF13 EXTI_FPR1_FPIF13_Msk /*!< Falling Pending Interrupt Flag on line 13 */ +#define EXTI_FPR1_FPIF14_Pos (14U) +#define EXTI_FPR1_FPIF14_Msk (0x1UL << EXTI_FPR1_FPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_FPR1_FPIF14 EXTI_FPR1_FPIF14_Msk /*!< Falling Pending Interrupt Flag on line 14 */ +#define EXTI_FPR1_FPIF15_Pos (15U) +#define EXTI_FPR1_FPIF15_Msk (0x1UL << EXTI_FPR1_FPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_FPR1_FPIF15 EXTI_FPR1_FPIF15_Msk /*!< Falling Pending Interrupt Flag on line 15 */ + +/***************** Bit definition for EXTI_EXTICR1 register **************/ +#define EXTI_EXTICR1_EXTI0_Pos (0U) +#define EXTI_EXTICR1_EXTI0_Msk (0x7UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR1_EXTI0 EXTI_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define EXTI_EXTICR1_EXTI0_0 (0x1UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR1_EXTI0_1 (0x2UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR1_EXTI0_2 (0x4UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR1_EXTI1_Pos (8U) +#define EXTI_EXTICR1_EXTI1_Msk (0x7UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR1_EXTI1 EXTI_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define EXTI_EXTICR1_EXTI1_0 (0x1UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR1_EXTI1_1 (0x2UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR1_EXTI1_2 (0x4UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR1_EXTI2_Pos (16U) +#define EXTI_EXTICR1_EXTI2_Msk (0x7UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR1_EXTI2 EXTI_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define EXTI_EXTICR1_EXTI2_0 (0x1UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR1_EXTI2_1 (0x2UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR1_EXTI2_2 (0x4UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR1_EXTI3_Pos (24U) +#define EXTI_EXTICR1_EXTI3_Msk (0x7UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR1_EXTI3 EXTI_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ +#define EXTI_EXTICR1_EXTI3_0 (0x1UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR1_EXTI3_1 (0x2UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR1_EXTI3_2 (0x4UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR2 register **************/ +#define EXTI_EXTICR2_EXTI4_Pos (0U) +#define EXTI_EXTICR2_EXTI4_Msk (0x7UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR2_EXTI4 EXTI_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define EXTI_EXTICR2_EXTI4_0 (0x1UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR2_EXTI4_1 (0x2UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR2_EXTI4_2 (0x4UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR2_EXTI5_Pos (8U) +#define EXTI_EXTICR2_EXTI5_Msk (0x7UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR2_EXTI5 EXTI_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define EXTI_EXTICR2_EXTI5_0 (0x1UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR2_EXTI5_1 (0x2UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR2_EXTI5_2 (0x4UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR2_EXTI6_Pos (16U) +#define EXTI_EXTICR2_EXTI6_Msk (0x7UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR2_EXTI6 EXTI_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define EXTI_EXTICR2_EXTI6_0 (0x1UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR2_EXTI6_1 (0x2UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR2_EXTI6_2 (0x4UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR2_EXTI7_Pos (24U) +#define EXTI_EXTICR2_EXTI7_Msk (0x7UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR2_EXTI7 EXTI_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ +#define EXTI_EXTICR2_EXTI7_0 (0x1UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR2_EXTI7_1 (0x2UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR2_EXTI7_2 (0x4UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR3 register **************/ +#define EXTI_EXTICR3_EXTI8_Pos (0U) +#define EXTI_EXTICR3_EXTI8_Msk (0x7UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR3_EXTI8 EXTI_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define EXTI_EXTICR3_EXTI8_0 (0x1UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR3_EXTI8_1 (0x2UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR3_EXTI8_2 (0x4UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR3_EXTI9_Pos (8U) +#define EXTI_EXTICR3_EXTI9_Msk (0x7UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR3_EXTI9 EXTI_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define EXTI_EXTICR3_EXTI9_0 (0x1UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR3_EXTI9_1 (0x2UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR3_EXTI9_2 (0x4UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR3_EXTI10_Pos (16U) +#define EXTI_EXTICR3_EXTI10_Msk (0x7UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR3_EXTI10 EXTI_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define EXTI_EXTICR3_EXTI10_0 (0x1UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR3_EXTI10_1 (0x2UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR3_EXTI10_2 (0x4UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR3_EXTI11_Pos (24U) +#define EXTI_EXTICR3_EXTI11_Msk (0x7UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR3_EXTI11 EXTI_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ +#define EXTI_EXTICR3_EXTI11_0 (0x1UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR3_EXTI11_1 (0x2UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR3_EXTI11_2 (0x4UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR4 register **************/ +#define EXTI_EXTICR4_EXTI12_Pos (0U) +#define EXTI_EXTICR4_EXTI12_Msk (0x7UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR4_EXTI12 EXTI_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define EXTI_EXTICR4_EXTI12_0 (0x1UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR4_EXTI12_1 (0x2UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR4_EXTI12_2 (0x4UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR4_EXTI13_Pos (8U) +#define EXTI_EXTICR4_EXTI13_Msk (0x7UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR4_EXTI13 EXTI_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define EXTI_EXTICR4_EXTI13_0 (0x1UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR4_EXTI13_1 (0x2UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR4_EXTI13_2 (0x4UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR4_EXTI14_Pos (16U) +#define EXTI_EXTICR4_EXTI14_Msk (0x7UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR4_EXTI14 EXTI_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define EXTI_EXTICR4_EXTI14_0 (0x1UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR4_EXTI14_1 (0x2UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR4_EXTI14_2 (0x4UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR4_EXTI15_Pos (24U) +#define EXTI_EXTICR4_EXTI15_Msk (0x7UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR4_EXTI15 EXTI_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ +#define EXTI_EXTICR4_EXTI15_0 (0x1UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR4_EXTI15_1 (0x2UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR4_EXTI15_2 (0x4UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x04000000 */ + +/******************* Bit definition for EXTI_IMR1 register ******************/ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM26_Pos (26U) +#define EXTI_IMR1_IM26_Msk (0x1UL << EXTI_IMR1_IM26_Pos) /*!< 0x04000000 */ +#define EXTI_IMR1_IM26 EXTI_IMR1_IM26_Msk /*!< Interrupt Mask on line 26 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< Interrupt Mask on line 31 */ +#define EXTI_IMR1_IM_Pos (0U) +#define EXTI_IMR1_IM_Msk (0x86A8FFFFUL << EXTI_IMR1_IM_Pos) /*!< 0x86A8FFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_IM_Msk /*!< Interrupt Mask All */ + + +/******************* Bit definition for EXTI_EMR1 register ******************/ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< Event Mask on line 15 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< Event Mask on line 19 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< Event Mask on line 21 */ +#define EXTI_EMR1_EM23_Pos (23U) +#define EXTI_EMR1_EM23_Msk (0x1UL << EXTI_EMR1_EM23_Pos) /*!< 0x00800000 */ +#define EXTI_EMR1_EM23 EXTI_EMR1_EM23_Msk /*!< Event Mask on line 23 */ +#define EXTI_EMR1_EM25_Pos (25U) +#define EXTI_EMR1_EM25_Msk (0x1UL << EXTI_EMR1_EM25_Pos) /*!< 0x02000000 */ +#define EXTI_EMR1_EM25 EXTI_EMR1_EM25_Msk /*!< Event Mask on line 25 */ +#define EXTI_EMR1_EM26_Pos (26U) +#define EXTI_EMR1_EM26_Msk (0x1UL << EXTI_EMR1_EM26_Pos) /*!< 0x04000000 */ +#define EXTI_EMR1_EM26 EXTI_EMR1_EM26_Msk /*!< Event Mask on line 26 */ +#define EXTI_EMR1_EM31_Pos (31U) +#define EXTI_EMR1_EM31_Msk (0x1UL << EXTI_EMR1_EM31_Pos) /*!< 0x80000000 */ +#define EXTI_EMR1_EM31 EXTI_EMR1_EM31_Msk /*!< Event Mask on line 31 */ + + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/* Note: No specific macro feature on this device */ + +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk +#define FLASH_ACR_PROGEMPTY_Pos (16U) +#define FLASH_ACR_PROGEMPTY_Msk (0x1UL << FLASH_ACR_PROGEMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_PROGEMPTY FLASH_ACR_PROGEMPTY_Msk + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk +#define FLASH_SR_BSY1_Pos (16U) +#define FLASH_SR_BSY1_Msk (0x1UL << FLASH_SR_BSY1_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY1 FLASH_SR_BSY1_Msk +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk +#define FLASH_CR_MER1_Pos (2U) +#define FLASH_CR_MER1_Msk (0x1UL << FLASH_CR_MER1_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER1 FLASH_CR_MER1_Msk +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0x3FUL << FLASH_CR_PNB_Pos) /*!< 0x000001F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x3FFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x00003FFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk +#define FLASH_OPTR_nRST_STOP_Pos (13U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk +#define FLASH_OPTR_nRST_STDBY_Pos (14U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk +#define FLASH_OPTR_RAM_PARITY_CHECK_Pos (22U) +#define FLASH_OPTR_RAM_PARITY_CHECK_Msk (0x1UL << FLASH_OPTR_RAM_PARITY_CHECK_Pos) /*!< 0x00400000 */ +#define FLASH_OPTR_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK_Msk +#define FLASH_OPTR_nBOOT_SEL_Pos (24U) +#define FLASH_OPTR_nBOOT_SEL_Msk (0x1UL << FLASH_OPTR_nBOOT_SEL_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_nBOOT_SEL FLASH_OPTR_nBOOT_SEL_Msk +#define FLASH_OPTR_nBOOT1_Pos (25U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk +#define FLASH_OPTR_nBOOT0_Pos (26U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x3FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000003F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x3FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x003F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x3FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000003F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x3FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x003F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk + + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0U) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g071xx + * @{ + */ + +#ifndef STM32G071xx_H +#define STM32G071xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g071xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI line 16 */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + UCPD1_2_IRQn = 8, /*!< UCPD1 and UCPD2 global Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + USART3_4_LPUART1_IRQn = 29, /*!< USART3, USART4 and LPUART1 globlal Interrupts (combined with EXTI 28) */ + CEC_IRQn = 30, /*!< CEC Interrupt(combined with EXTI 27) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief HDMI-CEC + */ +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd, used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even, used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ + uint32_t RESERVED5[2]; /*!< Reserved 5, 0x88 -- 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt Mask Register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event Mask Register 2, Address offset: 0x94 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED8[17];/*!< Reserved8, Address offset: 0x3C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief UCPD + */ +typedef struct +{ + __IO uint32_t CFG1; /*!< UCPD configuration register 1, Address offset: 0x00 */ + __IO uint32_t CFG2; /*!< UCPD configuration register 2, Address offset: 0x04 */ + __IO uint32_t RESERVED0; /*!< UCPD reserved register, Address offset: 0x08 */ + __IO uint32_t CR; /*!< UCPD control register, Address offset: 0x0C */ + __IO uint32_t IMR; /*!< UCPD interrupt mask register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< UCPD status register, Address offset: 0x14 */ + __IO uint32_t ICR; /*!< UCPD interrupt flag clear register Address offset: 0x18 */ + __IO uint32_t TX_ORDSET; /*!< UCPD Tx ordered set type register, Address offset: 0x1C */ + __IO uint32_t TX_PAYSZ; /*!< UCPD Tx payload size register, Address offset: 0x20 */ + __IO uint32_t TXDR; /*!< UCPD Tx data register, Address offset: 0x24 */ + __IO uint32_t RX_ORDSET; /*!< UCPD Rx ordered set type register, Address offset: 0x28 */ + __IO uint32_t RX_PAYSZ; /*!< UCPD Rx payload size register, Address offset: 0x2C */ + __IO uint32_t RXDR; /*!< UCPD Rx data register, Address offset: 0x30 */ + __IO uint32_t RX_ORDEXT1; /*!< UCPD Rx ordered set extension 1 register, Address offset: 0x34 */ + __IO uint32_t RX_ORDEXT2; /*!< UCPD Rx ordered set extension 2 register, Address offset: 0x38 */ + +} UCPD_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00008000UL) /*!< maximum SRAM size (up to 32 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x00FFU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM2_BASE (APBPERIPH_BASE + 0UL) +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM6_BASE (APBPERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APBPERIPH_BASE + 0x00001400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APBPERIPH_BASE + 0x00004800UL) +#define USART4_BASE (APBPERIPH_BASE + 0x00004C00UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define DAC1_BASE (APBPERIPH_BASE + 0x00007400UL) +#define DAC_BASE (APBPERIPH_BASE + 0x00007400UL) /* Kept for legacy purpose */ +#define CEC_BASE (APBPERIPH_BASE + 0x00007800UL) +#define LPTIM1_BASE (APBPERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APBPERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APBPERIPH_BASE + 0x00009400UL) +#define UCPD1_BASE (APBPERIPH_BASE + 0x0000A000UL) +#define UCPD2_BASE (APBPERIPH_BASE + 0x0000A400UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define VREFBUF_BASE (APBPERIPH_BASE + 0x00010030UL) +#define COMP1_BASE (SYSCFG_BASE + 0x0200UL) +#define COMP2_BASE (SYSCFG_BASE + 0x0204UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM15_BASE (APBPERIPH_BASE + 0x00014000UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define USART4 ((USART_TypeDef *) USART4_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + +#define UCPD1 ((UCPD_TypeDef *) UCPD1_BASE) +#define UCPD2 ((UCPD_TypeDef *) UCPD2_BASE) + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + +/******************************************************************************/ +/* */ +/* HDMI-CEC (CEC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CEC_CR register *********************/ +#define CEC_CR_CECEN_Pos (0U) +#define CEC_CR_CECEN_Msk (0x1UL << CEC_CR_CECEN_Pos) /*!< 0x00000001 */ +#define CEC_CR_CECEN CEC_CR_CECEN_Msk /*!< CEC Enable */ +#define CEC_CR_TXSOM_Pos (1U) +#define CEC_CR_TXSOM_Msk (0x1UL << CEC_CR_TXSOM_Pos) /*!< 0x00000002 */ +#define CEC_CR_TXSOM CEC_CR_TXSOM_Msk /*!< CEC Tx Start Of Message */ +#define CEC_CR_TXEOM_Pos (2U) +#define CEC_CR_TXEOM_Msk (0x1UL << CEC_CR_TXEOM_Pos) /*!< 0x00000004 */ +#define CEC_CR_TXEOM CEC_CR_TXEOM_Msk /*!< CEC Tx End Of Message */ + +/******************* Bit definition for CEC_CFGR register *******************/ +#define CEC_CFGR_SFT_Pos (0U) +#define CEC_CFGR_SFT_Msk (0x7UL << CEC_CFGR_SFT_Pos) /*!< 0x00000007 */ +#define CEC_CFGR_SFT CEC_CFGR_SFT_Msk /*!< CEC Signal Free Time */ +#define CEC_CFGR_RXTOL_Pos (3U) +#define CEC_CFGR_RXTOL_Msk (0x1UL << CEC_CFGR_RXTOL_Pos) /*!< 0x00000008 */ +#define CEC_CFGR_RXTOL CEC_CFGR_RXTOL_Msk /*!< CEC Tolerance */ +#define CEC_CFGR_BRESTP_Pos (4U) +#define CEC_CFGR_BRESTP_Msk (0x1UL << CEC_CFGR_BRESTP_Pos) /*!< 0x00000010 */ +#define CEC_CFGR_BRESTP CEC_CFGR_BRESTP_Msk /*!< CEC Rx Stop */ +#define CEC_CFGR_BREGEN_Pos (5U) +#define CEC_CFGR_BREGEN_Msk (0x1UL << CEC_CFGR_BREGEN_Pos) /*!< 0x00000020 */ +#define CEC_CFGR_BREGEN CEC_CFGR_BREGEN_Msk /*!< CEC Bit Rising Error generation */ +#define CEC_CFGR_LBPEGEN_Pos (6U) +#define CEC_CFGR_LBPEGEN_Msk (0x1UL << CEC_CFGR_LBPEGEN_Pos) /*!< 0x00000040 */ +#define CEC_CFGR_LBPEGEN CEC_CFGR_LBPEGEN_Msk /*!< CEC Long Bit Period Error gener. */ +#define CEC_CFGR_BRDNOGEN_Pos (7U) +#define CEC_CFGR_BRDNOGEN_Msk (0x1UL << CEC_CFGR_BRDNOGEN_Pos) /*!< 0x00000080 */ +#define CEC_CFGR_BRDNOGEN CEC_CFGR_BRDNOGEN_Msk /*!< CEC Broadcast No Error generation */ +#define CEC_CFGR_SFTOPT_Pos (8U) +#define CEC_CFGR_SFTOPT_Msk (0x1UL << CEC_CFGR_SFTOPT_Pos) /*!< 0x00000100 */ +#define CEC_CFGR_SFTOPT CEC_CFGR_SFTOPT_Msk /*!< CEC Signal Free Time optional */ +#define CEC_CFGR_OAR_Pos (16U) +#define CEC_CFGR_OAR_Msk (0x7FFFUL << CEC_CFGR_OAR_Pos) /*!< 0x7FFF0000 */ +#define CEC_CFGR_OAR CEC_CFGR_OAR_Msk /*!< CEC Own Address */ +#define CEC_CFGR_LSTN_Pos (31U) +#define CEC_CFGR_LSTN_Msk (0x1UL << CEC_CFGR_LSTN_Pos) /*!< 0x80000000 */ +#define CEC_CFGR_LSTN CEC_CFGR_LSTN_Msk /*!< CEC Listen mode */ + +/******************* Bit definition for CEC_TXDR register *******************/ +#define CEC_TXDR_TXD_Pos (0U) +#define CEC_TXDR_TXD_Msk (0xFFUL << CEC_TXDR_TXD_Pos) /*!< 0x000000FF */ +#define CEC_TXDR_TXD CEC_TXDR_TXD_Msk /*!< CEC Tx Data */ + +/******************* Bit definition for CEC_RXDR register *******************/ +#define CEC_RXDR_RXD_Pos (0U) +#define CEC_RXDR_RXD_Msk (0xFFUL << CEC_RXDR_RXD_Pos) /*!< 0x000000FF */ +#define CEC_RXDR_RXD CEC_RXDR_RXD_Msk /*!< CEC Rx Data */ + +/******************* Bit definition for CEC_ISR register ********************/ +#define CEC_ISR_RXBR_Pos (0U) +#define CEC_ISR_RXBR_Msk (0x1UL << CEC_ISR_RXBR_Pos) /*!< 0x00000001 */ +#define CEC_ISR_RXBR CEC_ISR_RXBR_Msk /*!< CEC Rx-Byte Received */ +#define CEC_ISR_RXEND_Pos (1U) +#define CEC_ISR_RXEND_Msk (0x1UL << CEC_ISR_RXEND_Pos) /*!< 0x00000002 */ +#define CEC_ISR_RXEND CEC_ISR_RXEND_Msk /*!< CEC End Of Reception */ +#define CEC_ISR_RXOVR_Pos (2U) +#define CEC_ISR_RXOVR_Msk (0x1UL << CEC_ISR_RXOVR_Pos) /*!< 0x00000004 */ +#define CEC_ISR_RXOVR CEC_ISR_RXOVR_Msk /*!< CEC Rx-Overrun */ +#define CEC_ISR_BRE_Pos (3U) +#define CEC_ISR_BRE_Msk (0x1UL << CEC_ISR_BRE_Pos) /*!< 0x00000008 */ +#define CEC_ISR_BRE CEC_ISR_BRE_Msk /*!< CEC Rx Bit Rising Error */ +#define CEC_ISR_SBPE_Pos (4U) +#define CEC_ISR_SBPE_Msk (0x1UL << CEC_ISR_SBPE_Pos) /*!< 0x00000010 */ +#define CEC_ISR_SBPE CEC_ISR_SBPE_Msk /*!< CEC Rx Short Bit period Error */ +#define CEC_ISR_LBPE_Pos (5U) +#define CEC_ISR_LBPE_Msk (0x1UL << CEC_ISR_LBPE_Pos) /*!< 0x00000020 */ +#define CEC_ISR_LBPE CEC_ISR_LBPE_Msk /*!< CEC Rx Long Bit period Error */ +#define CEC_ISR_RXACKE_Pos (6U) +#define CEC_ISR_RXACKE_Msk (0x1UL << CEC_ISR_RXACKE_Pos) /*!< 0x00000040 */ +#define CEC_ISR_RXACKE CEC_ISR_RXACKE_Msk /*!< CEC Rx Missing Acknowledge */ +#define CEC_ISR_ARBLST_Pos (7U) +#define CEC_ISR_ARBLST_Msk (0x1UL << CEC_ISR_ARBLST_Pos) /*!< 0x00000080 */ +#define CEC_ISR_ARBLST CEC_ISR_ARBLST_Msk /*!< CEC Arbitration Lost */ +#define CEC_ISR_TXBR_Pos (8U) +#define CEC_ISR_TXBR_Msk (0x1UL << CEC_ISR_TXBR_Pos) /*!< 0x00000100 */ +#define CEC_ISR_TXBR CEC_ISR_TXBR_Msk /*!< CEC Tx Byte Request */ +#define CEC_ISR_TXEND_Pos (9U) +#define CEC_ISR_TXEND_Msk (0x1UL << CEC_ISR_TXEND_Pos) /*!< 0x00000200 */ +#define CEC_ISR_TXEND CEC_ISR_TXEND_Msk /*!< CEC End of Transmission */ +#define CEC_ISR_TXUDR_Pos (10U) +#define CEC_ISR_TXUDR_Msk (0x1UL << CEC_ISR_TXUDR_Pos) /*!< 0x00000400 */ +#define CEC_ISR_TXUDR CEC_ISR_TXUDR_Msk /*!< CEC Tx-Buffer Underrun */ +#define CEC_ISR_TXERR_Pos (11U) +#define CEC_ISR_TXERR_Msk (0x1UL << CEC_ISR_TXERR_Pos) /*!< 0x00000800 */ +#define CEC_ISR_TXERR CEC_ISR_TXERR_Msk /*!< CEC Tx-Error */ +#define CEC_ISR_TXACKE_Pos (12U) +#define CEC_ISR_TXACKE_Msk (0x1UL << CEC_ISR_TXACKE_Pos) /*!< 0x00001000 */ +#define CEC_ISR_TXACKE CEC_ISR_TXACKE_Msk /*!< CEC Tx Missing Acknowledge */ + +/******************* Bit definition for CEC_IER register ********************/ +#define CEC_IER_RXBRIE_Pos (0U) +#define CEC_IER_RXBRIE_Msk (0x1UL << CEC_IER_RXBRIE_Pos) /*!< 0x00000001 */ +#define CEC_IER_RXBRIE CEC_IER_RXBRIE_Msk /*!< CEC Rx-Byte Received IT Enable */ +#define CEC_IER_RXENDIE_Pos (1U) +#define CEC_IER_RXENDIE_Msk (0x1UL << CEC_IER_RXENDIE_Pos) /*!< 0x00000002 */ +#define CEC_IER_RXENDIE CEC_IER_RXENDIE_Msk /*!< CEC End Of Reception IT Enable */ +#define CEC_IER_RXOVRIE_Pos (2U) +#define CEC_IER_RXOVRIE_Msk (0x1UL << CEC_IER_RXOVRIE_Pos) /*!< 0x00000004 */ +#define CEC_IER_RXOVRIE CEC_IER_RXOVRIE_Msk /*!< CEC Rx-Overrun IT Enable */ +#define CEC_IER_BREIE_Pos (3U) +#define CEC_IER_BREIE_Msk (0x1UL << CEC_IER_BREIE_Pos) /*!< 0x00000008 */ +#define CEC_IER_BREIE CEC_IER_BREIE_Msk /*!< CEC Rx Bit Rising Error IT Enable */ +#define CEC_IER_SBPEIE_Pos (4U) +#define CEC_IER_SBPEIE_Msk (0x1UL << CEC_IER_SBPEIE_Pos) /*!< 0x00000010 */ +#define CEC_IER_SBPEIE CEC_IER_SBPEIE_Msk /*!< CEC Rx Short Bit period Error IT Enable*/ +#define CEC_IER_LBPEIE_Pos (5U) +#define CEC_IER_LBPEIE_Msk (0x1UL << CEC_IER_LBPEIE_Pos) /*!< 0x00000020 */ +#define CEC_IER_LBPEIE CEC_IER_LBPEIE_Msk /*!< CEC Rx Long Bit period Error IT Enable */ +#define CEC_IER_RXACKEIE_Pos (6U) +#define CEC_IER_RXACKEIE_Msk (0x1UL << CEC_IER_RXACKEIE_Pos) /*!< 0x00000040 */ +#define CEC_IER_RXACKEIE CEC_IER_RXACKEIE_Msk /*!< CEC Rx Missing Acknowledge IT Enable */ +#define CEC_IER_ARBLSTIE_Pos (7U) +#define CEC_IER_ARBLSTIE_Msk (0x1UL << CEC_IER_ARBLSTIE_Pos) /*!< 0x00000080 */ +#define CEC_IER_ARBLSTIE CEC_IER_ARBLSTIE_Msk /*!< CEC Arbitration Lost IT Enable */ +#define CEC_IER_TXBRIE_Pos (8U) +#define CEC_IER_TXBRIE_Msk (0x1UL << CEC_IER_TXBRIE_Pos) /*!< 0x00000100 */ +#define CEC_IER_TXBRIE CEC_IER_TXBRIE_Msk /*!< CEC Tx Byte Request IT Enable */ +#define CEC_IER_TXENDIE_Pos (9U) +#define CEC_IER_TXENDIE_Msk (0x1UL << CEC_IER_TXENDIE_Pos) /*!< 0x00000200 */ +#define CEC_IER_TXENDIE CEC_IER_TXENDIE_Msk /*!< CEC End of Transmission IT Enable */ +#define CEC_IER_TXUDRIE_Pos (10U) +#define CEC_IER_TXUDRIE_Msk (0x1UL << CEC_IER_TXUDRIE_Pos) /*!< 0x00000400 */ +#define CEC_IER_TXUDRIE CEC_IER_TXUDRIE_Msk /*!< CEC Tx-Buffer Underrun IT Enable */ +#define CEC_IER_TXERRIE_Pos (11U) +#define CEC_IER_TXERRIE_Msk (0x1UL << CEC_IER_TXERRIE_Pos) /*!< 0x00000800 */ +#define CEC_IER_TXERRIE CEC_IER_TXERRIE_Msk /*!< CEC Tx-Error IT Enable */ +#define CEC_IER_TXACKEIE_Pos (12U) +#define CEC_IER_TXACKEIE_Msk (0x1UL << CEC_IER_TXACKEIE_Pos) /*!< 0x00001000 */ +#define CEC_IER_TXACKEIE CEC_IER_TXACKEIE_Msk /*!< CEC Tx Missing Acknowledge IT Enable */ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define DAC_ADDITIONAL_TRIGGERS_SUPPORT + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE8_SR_UCPD1_Pos (0U) +#define SYSCFG_ITLINE8_SR_UCPD1_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE8_SR_UCPD1 SYSCFG_ITLINE8_SR_UCPD1_Msk /*!< UCPD1 -> exti[32] Interrupt */ +#define SYSCFG_ITLINE8_SR_UCPD2_Pos (1U) +#define SYSCFG_ITLINE8_SR_UCPD2_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD2_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE8_SR_UCPD2 SYSCFG_ITLINE8_SR_UCPD2_Msk /*!< UCPD2 -> exti[33] Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE30_SR_CEC_Pos (0U) +#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1UL << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt-> exti[27] */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g081xx + * @{ + */ + +#ifndef STM32G081xx_H +#define STM32G081xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g081xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI line 16 */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + UCPD1_2_IRQn = 8, /*!< UCPD1 and UCPD2 global Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + USART3_4_LPUART1_IRQn = 29, /*!< USART3, USART4 and LPUART1 globlal Interrupts (combined with EXTI 28) */ + CEC_IRQn = 30, /*!< CEC Interrupt(combined with EXTI 27) */ + AES_RNG_IRQn = 31, /*!< AES & RNG Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief HDMI-CEC + */ +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd, used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even, used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ + uint32_t RESERVED5[2]; /*!< Reserved 5, 0x88 -- 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt Mask Register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event Mask Register 2, Address offset: 0x94 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED8[17];/*!< Reserved8, Address offset: 0x3C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x5C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + + +/** + * @brief UCPD + */ +typedef struct +{ + __IO uint32_t CFG1; /*!< UCPD configuration register 1, Address offset: 0x00 */ + __IO uint32_t CFG2; /*!< UCPD configuration register 2, Address offset: 0x04 */ + __IO uint32_t RESERVED0; /*!< UCPD reserved register, Address offset: 0x08 */ + __IO uint32_t CR; /*!< UCPD control register, Address offset: 0x0C */ + __IO uint32_t IMR; /*!< UCPD interrupt mask register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< UCPD status register, Address offset: 0x14 */ + __IO uint32_t ICR; /*!< UCPD interrupt flag clear register Address offset: 0x18 */ + __IO uint32_t TX_ORDSET; /*!< UCPD Tx ordered set type register, Address offset: 0x1C */ + __IO uint32_t TX_PAYSZ; /*!< UCPD Tx payload size register, Address offset: 0x20 */ + __IO uint32_t TXDR; /*!< UCPD Tx data register, Address offset: 0x24 */ + __IO uint32_t RX_ORDSET; /*!< UCPD Rx ordered set type register, Address offset: 0x28 */ + __IO uint32_t RX_PAYSZ; /*!< UCPD Rx payload size register, Address offset: 0x2C */ + __IO uint32_t RXDR; /*!< UCPD Rx data register, Address offset: 0x30 */ + __IO uint32_t RX_ORDEXT1; /*!< UCPD Rx ordered set extension 1 register, Address offset: 0x34 */ + __IO uint32_t RX_ORDEXT2; /*!< UCPD Rx ordered set extension 2 register, Address offset: 0x38 */ + +} UCPD_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ +#define SRAM_SIZE_MAX (0x00008000UL) /*!< maximum SRAM size (up to 32 KBytes) */ + +#define FLASH_SIZE (((*((uint32_t *)FLASHSIZE_BASE)) & (0x00FFU)) << 10U) + +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM2_BASE (APBPERIPH_BASE + 0UL) +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM6_BASE (APBPERIPH_BASE + 0x00001000UL) +#define TIM7_BASE (APBPERIPH_BASE + 0x00001400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define USART3_BASE (APBPERIPH_BASE + 0x00004800UL) +#define USART4_BASE (APBPERIPH_BASE + 0x00004C00UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define DAC1_BASE (APBPERIPH_BASE + 0x00007400UL) +#define DAC_BASE (APBPERIPH_BASE + 0x00007400UL) /* Kept for legacy purpose */ +#define CEC_BASE (APBPERIPH_BASE + 0x00007800UL) +#define LPTIM1_BASE (APBPERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APBPERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APBPERIPH_BASE + 0x00009400UL) +#define UCPD1_BASE (APBPERIPH_BASE + 0x0000A000UL) +#define UCPD2_BASE (APBPERIPH_BASE + 0x0000A400UL) +#define TAMP_BASE (APBPERIPH_BASE + 0x0000B000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define VREFBUF_BASE (APBPERIPH_BASE + 0x00010030UL) +#define COMP1_BASE (SYSCFG_BASE + 0x0200UL) +#define COMP2_BASE (SYSCFG_BASE + 0x0204UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM15_BASE (APBPERIPH_BASE + 0x00014000UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + +#define RNG_BASE (AHBPERIPH_BASE + 0x00005000UL) +#define AES_BASE (AHBPERIPH_BASE + 0x00006000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define USART4 ((USART_TypeDef *) USART4_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + +#define AES ((AES_TypeDef *) AES_BASE) +#define AES1 ((AES_TypeDef *) AES_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) + +#define UCPD1 ((UCPD_TypeDef *) UCPD1_BASE) +#define UCPD2 ((UCPD_TypeDef *) UCPD2_BASE) + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32G0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32G0) */ + +/******************************************************************************/ +/* */ +/* HDMI-CEC (CEC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CEC_CR register *********************/ +#define CEC_CR_CECEN_Pos (0U) +#define CEC_CR_CECEN_Msk (0x1UL << CEC_CR_CECEN_Pos) /*!< 0x00000001 */ +#define CEC_CR_CECEN CEC_CR_CECEN_Msk /*!< CEC Enable */ +#define CEC_CR_TXSOM_Pos (1U) +#define CEC_CR_TXSOM_Msk (0x1UL << CEC_CR_TXSOM_Pos) /*!< 0x00000002 */ +#define CEC_CR_TXSOM CEC_CR_TXSOM_Msk /*!< CEC Tx Start Of Message */ +#define CEC_CR_TXEOM_Pos (2U) +#define CEC_CR_TXEOM_Msk (0x1UL << CEC_CR_TXEOM_Pos) /*!< 0x00000004 */ +#define CEC_CR_TXEOM CEC_CR_TXEOM_Msk /*!< CEC Tx End Of Message */ + +/******************* Bit definition for CEC_CFGR register *******************/ +#define CEC_CFGR_SFT_Pos (0U) +#define CEC_CFGR_SFT_Msk (0x7UL << CEC_CFGR_SFT_Pos) /*!< 0x00000007 */ +#define CEC_CFGR_SFT CEC_CFGR_SFT_Msk /*!< CEC Signal Free Time */ +#define CEC_CFGR_RXTOL_Pos (3U) +#define CEC_CFGR_RXTOL_Msk (0x1UL << CEC_CFGR_RXTOL_Pos) /*!< 0x00000008 */ +#define CEC_CFGR_RXTOL CEC_CFGR_RXTOL_Msk /*!< CEC Tolerance */ +#define CEC_CFGR_BRESTP_Pos (4U) +#define CEC_CFGR_BRESTP_Msk (0x1UL << CEC_CFGR_BRESTP_Pos) /*!< 0x00000010 */ +#define CEC_CFGR_BRESTP CEC_CFGR_BRESTP_Msk /*!< CEC Rx Stop */ +#define CEC_CFGR_BREGEN_Pos (5U) +#define CEC_CFGR_BREGEN_Msk (0x1UL << CEC_CFGR_BREGEN_Pos) /*!< 0x00000020 */ +#define CEC_CFGR_BREGEN CEC_CFGR_BREGEN_Msk /*!< CEC Bit Rising Error generation */ +#define CEC_CFGR_LBPEGEN_Pos (6U) +#define CEC_CFGR_LBPEGEN_Msk (0x1UL << CEC_CFGR_LBPEGEN_Pos) /*!< 0x00000040 */ +#define CEC_CFGR_LBPEGEN CEC_CFGR_LBPEGEN_Msk /*!< CEC Long Bit Period Error gener. */ +#define CEC_CFGR_BRDNOGEN_Pos (7U) +#define CEC_CFGR_BRDNOGEN_Msk (0x1UL << CEC_CFGR_BRDNOGEN_Pos) /*!< 0x00000080 */ +#define CEC_CFGR_BRDNOGEN CEC_CFGR_BRDNOGEN_Msk /*!< CEC Broadcast No Error generation */ +#define CEC_CFGR_SFTOPT_Pos (8U) +#define CEC_CFGR_SFTOPT_Msk (0x1UL << CEC_CFGR_SFTOPT_Pos) /*!< 0x00000100 */ +#define CEC_CFGR_SFTOPT CEC_CFGR_SFTOPT_Msk /*!< CEC Signal Free Time optional */ +#define CEC_CFGR_OAR_Pos (16U) +#define CEC_CFGR_OAR_Msk (0x7FFFUL << CEC_CFGR_OAR_Pos) /*!< 0x7FFF0000 */ +#define CEC_CFGR_OAR CEC_CFGR_OAR_Msk /*!< CEC Own Address */ +#define CEC_CFGR_LSTN_Pos (31U) +#define CEC_CFGR_LSTN_Msk (0x1UL << CEC_CFGR_LSTN_Pos) /*!< 0x80000000 */ +#define CEC_CFGR_LSTN CEC_CFGR_LSTN_Msk /*!< CEC Listen mode */ + +/******************* Bit definition for CEC_TXDR register *******************/ +#define CEC_TXDR_TXD_Pos (0U) +#define CEC_TXDR_TXD_Msk (0xFFUL << CEC_TXDR_TXD_Pos) /*!< 0x000000FF */ +#define CEC_TXDR_TXD CEC_TXDR_TXD_Msk /*!< CEC Tx Data */ + +/******************* Bit definition for CEC_RXDR register *******************/ +#define CEC_RXDR_RXD_Pos (0U) +#define CEC_RXDR_RXD_Msk (0xFFUL << CEC_RXDR_RXD_Pos) /*!< 0x000000FF */ +#define CEC_RXDR_RXD CEC_RXDR_RXD_Msk /*!< CEC Rx Data */ + +/******************* Bit definition for CEC_ISR register ********************/ +#define CEC_ISR_RXBR_Pos (0U) +#define CEC_ISR_RXBR_Msk (0x1UL << CEC_ISR_RXBR_Pos) /*!< 0x00000001 */ +#define CEC_ISR_RXBR CEC_ISR_RXBR_Msk /*!< CEC Rx-Byte Received */ +#define CEC_ISR_RXEND_Pos (1U) +#define CEC_ISR_RXEND_Msk (0x1UL << CEC_ISR_RXEND_Pos) /*!< 0x00000002 */ +#define CEC_ISR_RXEND CEC_ISR_RXEND_Msk /*!< CEC End Of Reception */ +#define CEC_ISR_RXOVR_Pos (2U) +#define CEC_ISR_RXOVR_Msk (0x1UL << CEC_ISR_RXOVR_Pos) /*!< 0x00000004 */ +#define CEC_ISR_RXOVR CEC_ISR_RXOVR_Msk /*!< CEC Rx-Overrun */ +#define CEC_ISR_BRE_Pos (3U) +#define CEC_ISR_BRE_Msk (0x1UL << CEC_ISR_BRE_Pos) /*!< 0x00000008 */ +#define CEC_ISR_BRE CEC_ISR_BRE_Msk /*!< CEC Rx Bit Rising Error */ +#define CEC_ISR_SBPE_Pos (4U) +#define CEC_ISR_SBPE_Msk (0x1UL << CEC_ISR_SBPE_Pos) /*!< 0x00000010 */ +#define CEC_ISR_SBPE CEC_ISR_SBPE_Msk /*!< CEC Rx Short Bit period Error */ +#define CEC_ISR_LBPE_Pos (5U) +#define CEC_ISR_LBPE_Msk (0x1UL << CEC_ISR_LBPE_Pos) /*!< 0x00000020 */ +#define CEC_ISR_LBPE CEC_ISR_LBPE_Msk /*!< CEC Rx Long Bit period Error */ +#define CEC_ISR_RXACKE_Pos (6U) +#define CEC_ISR_RXACKE_Msk (0x1UL << CEC_ISR_RXACKE_Pos) /*!< 0x00000040 */ +#define CEC_ISR_RXACKE CEC_ISR_RXACKE_Msk /*!< CEC Rx Missing Acknowledge */ +#define CEC_ISR_ARBLST_Pos (7U) +#define CEC_ISR_ARBLST_Msk (0x1UL << CEC_ISR_ARBLST_Pos) /*!< 0x00000080 */ +#define CEC_ISR_ARBLST CEC_ISR_ARBLST_Msk /*!< CEC Arbitration Lost */ +#define CEC_ISR_TXBR_Pos (8U) +#define CEC_ISR_TXBR_Msk (0x1UL << CEC_ISR_TXBR_Pos) /*!< 0x00000100 */ +#define CEC_ISR_TXBR CEC_ISR_TXBR_Msk /*!< CEC Tx Byte Request */ +#define CEC_ISR_TXEND_Pos (9U) +#define CEC_ISR_TXEND_Msk (0x1UL << CEC_ISR_TXEND_Pos) /*!< 0x00000200 */ +#define CEC_ISR_TXEND CEC_ISR_TXEND_Msk /*!< CEC End of Transmission */ +#define CEC_ISR_TXUDR_Pos (10U) +#define CEC_ISR_TXUDR_Msk (0x1UL << CEC_ISR_TXUDR_Pos) /*!< 0x00000400 */ +#define CEC_ISR_TXUDR CEC_ISR_TXUDR_Msk /*!< CEC Tx-Buffer Underrun */ +#define CEC_ISR_TXERR_Pos (11U) +#define CEC_ISR_TXERR_Msk (0x1UL << CEC_ISR_TXERR_Pos) /*!< 0x00000800 */ +#define CEC_ISR_TXERR CEC_ISR_TXERR_Msk /*!< CEC Tx-Error */ +#define CEC_ISR_TXACKE_Pos (12U) +#define CEC_ISR_TXACKE_Msk (0x1UL << CEC_ISR_TXACKE_Pos) /*!< 0x00001000 */ +#define CEC_ISR_TXACKE CEC_ISR_TXACKE_Msk /*!< CEC Tx Missing Acknowledge */ + +/******************* Bit definition for CEC_IER register ********************/ +#define CEC_IER_RXBRIE_Pos (0U) +#define CEC_IER_RXBRIE_Msk (0x1UL << CEC_IER_RXBRIE_Pos) /*!< 0x00000001 */ +#define CEC_IER_RXBRIE CEC_IER_RXBRIE_Msk /*!< CEC Rx-Byte Received IT Enable */ +#define CEC_IER_RXENDIE_Pos (1U) +#define CEC_IER_RXENDIE_Msk (0x1UL << CEC_IER_RXENDIE_Pos) /*!< 0x00000002 */ +#define CEC_IER_RXENDIE CEC_IER_RXENDIE_Msk /*!< CEC End Of Reception IT Enable */ +#define CEC_IER_RXOVRIE_Pos (2U) +#define CEC_IER_RXOVRIE_Msk (0x1UL << CEC_IER_RXOVRIE_Pos) /*!< 0x00000004 */ +#define CEC_IER_RXOVRIE CEC_IER_RXOVRIE_Msk /*!< CEC Rx-Overrun IT Enable */ +#define CEC_IER_BREIE_Pos (3U) +#define CEC_IER_BREIE_Msk (0x1UL << CEC_IER_BREIE_Pos) /*!< 0x00000008 */ +#define CEC_IER_BREIE CEC_IER_BREIE_Msk /*!< CEC Rx Bit Rising Error IT Enable */ +#define CEC_IER_SBPEIE_Pos (4U) +#define CEC_IER_SBPEIE_Msk (0x1UL << CEC_IER_SBPEIE_Pos) /*!< 0x00000010 */ +#define CEC_IER_SBPEIE CEC_IER_SBPEIE_Msk /*!< CEC Rx Short Bit period Error IT Enable*/ +#define CEC_IER_LBPEIE_Pos (5U) +#define CEC_IER_LBPEIE_Msk (0x1UL << CEC_IER_LBPEIE_Pos) /*!< 0x00000020 */ +#define CEC_IER_LBPEIE CEC_IER_LBPEIE_Msk /*!< CEC Rx Long Bit period Error IT Enable */ +#define CEC_IER_RXACKEIE_Pos (6U) +#define CEC_IER_RXACKEIE_Msk (0x1UL << CEC_IER_RXACKEIE_Pos) /*!< 0x00000040 */ +#define CEC_IER_RXACKEIE CEC_IER_RXACKEIE_Msk /*!< CEC Rx Missing Acknowledge IT Enable */ +#define CEC_IER_ARBLSTIE_Pos (7U) +#define CEC_IER_ARBLSTIE_Msk (0x1UL << CEC_IER_ARBLSTIE_Pos) /*!< 0x00000080 */ +#define CEC_IER_ARBLSTIE CEC_IER_ARBLSTIE_Msk /*!< CEC Arbitration Lost IT Enable */ +#define CEC_IER_TXBRIE_Pos (8U) +#define CEC_IER_TXBRIE_Msk (0x1UL << CEC_IER_TXBRIE_Pos) /*!< 0x00000100 */ +#define CEC_IER_TXBRIE CEC_IER_TXBRIE_Msk /*!< CEC Tx Byte Request IT Enable */ +#define CEC_IER_TXENDIE_Pos (9U) +#define CEC_IER_TXENDIE_Msk (0x1UL << CEC_IER_TXENDIE_Pos) /*!< 0x00000200 */ +#define CEC_IER_TXENDIE CEC_IER_TXENDIE_Msk /*!< CEC End of Transmission IT Enable */ +#define CEC_IER_TXUDRIE_Pos (10U) +#define CEC_IER_TXUDRIE_Msk (0x1UL << CEC_IER_TXUDRIE_Pos) /*!< 0x00000400 */ +#define CEC_IER_TXUDRIE CEC_IER_TXUDRIE_Msk /*!< CEC Tx-Buffer Underrun IT Enable */ +#define CEC_IER_TXERRIE_Pos (11U) +#define CEC_IER_TXERRIE_Msk (0x1UL << CEC_IER_TXERRIE_Pos) /*!< 0x00000800 */ +#define CEC_IER_TXERRIE CEC_IER_TXERRIE_Msk /*!< CEC Tx-Error IT Enable */ +#define CEC_IER_TXACKEIE_Pos (12U) +#define CEC_IER_TXACKEIE_Msk (0x1UL << CEC_IER_TXACKEIE_Pos) /*!< 0x00001000 */ +#define CEC_IER_TXACKEIE CEC_IER_TXACKEIE_Msk /*!< CEC Tx Missing Acknowledge IT Enable */ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1UL << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2UL << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1UL << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2UL << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001UL << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002UL << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800UL << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last block of payload. */ +#define AES_CR_NPBLB_0 (0x1UL << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2UL << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4UL << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8UL << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1UL << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2UL << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define DAC_ADDITIONAL_TRIGGERS_SUPPORT + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1_Pos (0U) +#define DAC_CR_EN1_Msk (0x1UL << DAC_CR_EN1_Pos) /*!< 0x00000001 */ +#define DAC_CR_EN1 DAC_CR_EN1_Msk /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE8_SR_UCPD1_Pos (0U) +#define SYSCFG_ITLINE8_SR_UCPD1_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE8_SR_UCPD1 SYSCFG_ITLINE8_SR_UCPD1_Msk /*!< UCPD1 -> exti[32] Interrupt */ +#define SYSCFG_ITLINE8_SR_UCPD2_Pos (1U) +#define SYSCFG_ITLINE8_SR_UCPD2_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD2_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE8_SR_UCPD2 SYSCFG_ITLINE8_SR_UCPD2_Msk /*!< UCPD2 -> exti[33] Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE30_SR_CEC_Pos (0U) +#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1UL << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt-> exti[27] */ +#define SYSCFG_ITLINE31_SR_RNG_Pos (0U) +#define SYSCFG_ITLINE31_SR_RNG_Msk (0x1UL << SYSCFG_ITLINE31_SR_RNG_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE31_SR_RNG SYSCFG_ITLINE31_SR_RNG_Msk /*!< RNG Interrupt */ +#define SYSCFG_ITLINE31_SR_AES_Pos (1U) +#define SYSCFG_ITLINE31_SR_AES_Msk (0x1UL << SYSCFG_ITLINE31_SR_AES_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE31_SR_AES SYSCFG_ITLINE31_SR_AES_Msk /*!< AES Interrupt */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g0b0xx + * @{ + */ + +#ifndef STM32G0B0xx_H +#define STM32G0B0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g0b0xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + USB_IRQn = 8, /*!< USB Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5 and DMAMUX1 Overrun Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_TIM4_IRQn = 16, /*!< TIM3, TIM4 global Interrupt */ + TIM6_IRQn = 17, /*!< TIM6 global Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_3_IRQn = 24, /*!< I2C2, I2C3 Interrupt (combined with EXTI 24 and EXTI 22) */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_3_IRQn = 26, /*!< SPI2/I2S2, SPI3/I2S3 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + USART3_4_5_6_IRQn = 29, /*!< USART3, USART4, USART5, USART6 globlal Interrupts (combined with EXTI 28) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ + uint32_t RESERVED5[2]; /*!< Reserved 5, 0x88 -- 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt Mask Register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event Mask Register 2, Address offset: 0x94 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC bank 1 register, Address offset: 0x18 */ + __IO uint32_t ECC2R; /*!< FLASH ECC bank 2 register, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + uint32_t RESERVED3[2]; /*!< Reserved3, Address offset: 0x24--0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + uint32_t RESERVED4[2]; /*!< Reserved4, Address offset: 0x34--0x38 */ + uint32_t RESERVED5[2]; /*!< Reserved5, Address offset: 0x3C--0x40 */ + uint32_t RESERVED6[2]; /*!< Reserved6, Address offset: 0x44--0x48 */ + __IO uint32_t WRP2AR; /*!< FLASH Bank2 WRP area A address register, Address offset: 0x4C */ + __IO uint32_t WRP2BR; /*!< FLASH Bank2 WRP area B address register, Address offset: 0x50 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t CRRCR; /*!< RCC Clock Configuration Register, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t CCIPR2; /*!< RCC Peripherals Independent Clocks Configuration Register2, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Dual Role Device + */ + +typedef struct +{ + __IO uint32_t CHEP0R; /*!< USB Channel/Endpoint 0 register, Address offset: 0x00 */ + __IO uint32_t CHEP1R; /*!< USB Channel/Endpoint 1 register, Address offset: 0x04 */ + __IO uint32_t CHEP2R; /*!< USB Channel/Endpoint 2 register, Address offset: 0x08 */ + __IO uint32_t CHEP3R; /*!< USB Channel/Endpoint 3 register, Address offset: 0x0C */ + __IO uint32_t CHEP4R; /*!< USB Channel/Endpoint 4 register, Address offset: 0x10 */ + __IO uint32_t CHEP5R; /*!< USB Channel/Endpoint 5 register, Address offset: 0x14 */ + __IO uint32_t CHEP6R; /*!< USB Channel/Endpoint 6 register, Address offset: 0x18 */ + __IO uint32_t CHEP7R; /*!< USB Channel/Endpoint 7 register, Address offset: 0x1C */ + __IO uint32_t RESERVED0[8]; /*!< Reserved, */ + __IO uint32_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint32_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint32_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint32_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint32_t RESERVED1; /*!< Reserved */ + __IO uint32_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint32_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ +} USB_DRD_TypeDef; + +/** + * @brief Universal Serial Bus PacketMemoryArea Buffer Descriptor Table + */ +typedef struct +{ + __IO uint32_t TXBD; /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_TAMP3E_Pos (2U) +#define TAMP_CR1_TAMP3E_Msk (0x1UL << TAMP_CR1_TAMP3E_Pos) /*!< 0x00000004 */ +#define TAMP_CR1_TAMP3E TAMP_CR1_TAMP3E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP3NOERASE_Pos (2U) +#define TAMP_CR2_TAMP3NOERASE_Msk (0x1UL << TAMP_CR2_TAMP3NOERASE_Pos) /*!< 0x00000004 */ +#define TAMP_CR2_TAMP3NOERASE TAMP_CR2_TAMP3NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP3MSK_Pos (18U) +#define TAMP_CR2_TAMP3MSK_Msk (0x1UL << TAMP_CR2_TAMP3MSK_Pos) /*!< 0x00040000 */ +#define TAMP_CR2_TAMP3MSK TAMP_CR2_TAMP3MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk +#define TAMP_CR2_TAMP3TRG_Pos (26U) +#define TAMP_CR2_TAMP3TRG_Msk (0x1UL << TAMP_CR2_TAMP3TRG_Pos) /*!< 0x04000000 */ +#define TAMP_CR2_TAMP3TRG TAMP_CR2_TAMP3TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_TAMP3IE_Pos (2U) +#define TAMP_IER_TAMP3IE_Msk (0x1UL << TAMP_IER_TAMP3IE_Pos) /*!< 0x00000004 */ +#define TAMP_IER_TAMP3IE TAMP_IER_TAMP3IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_TAMP3F_Pos (2U) +#define TAMP_SR_TAMP3F_Msk (0x1UL << TAMP_SR_TAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SR_TAMP3F TAMP_SR_TAMP3F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_TAMP3MF_Pos (2U) +#define TAMP_MISR_TAMP3MF_Msk (0x1UL << TAMP_MISR_TAMP3MF_Pos) /*!< 0x00000004 */ +#define TAMP_MISR_TAMP3MF TAMP_MISR_TAMP3MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CTAMP3F_Pos (2U) +#define TAMP_SCR_CTAMP3F_Msk (0x1UL << TAMP_SCR_CTAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SCR_CTAMP3F TAMP_SCR_CTAMP3F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE8_SR_USB_Pos (2U) +#define SYSCFG_ITLINE8_SR_USB_Msk (0x1UL << SYSCFG_ITLINE8_SR_USB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE8_SR_USB SYSCFG_ITLINE8_SR_USB_Msk /*!< USB Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Pos (5U) +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH1_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1 SYSCFG_ITLINE11_SR_DMA2_CH1_Msk /*!< DMA2 Channel 1 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Pos (6U) +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH2_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2 SYSCFG_ITLINE11_SR_DMA2_CH2_Msk /*!< DMA2 Channel 2 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Pos (7U) +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH3_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3 SYSCFG_ITLINE11_SR_DMA2_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Pos (8U) +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH4_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4 SYSCFG_ITLINE11_SR_DMA2_CH4_Msk /*!< DMA2 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Pos (9U) +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH5_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5 SYSCFG_ITLINE11_SR_DMA2_CH5_Msk /*!< DMA2 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Pos (1U) +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB SYSCFG_ITLINE16_SR_TIM4_GLB_Msk /*!< TIM4 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Pos (1U) +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C3_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE24_SR_I2C3_GLB SYSCFG_ITLINE24_SR_I2C3_GLB_Msk /*!< I2C3 GLB Interrupt -> exti[24]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI3_Pos (1U) +#define SYSCFG_ITLINE26_SR_SPI3_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE26_SR_SPI3 SYSCFG_ITLINE26_SR_SPI3_Msk /*!< SPI3 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART5_GLB_Pos (3U) +#define SYSCFG_ITLINE29_SR_USART5_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART5_GLB_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE29_SR_USART5_GLB SYSCFG_ITLINE29_SR_USART5_GLB_Msk /*!< USART5 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART6_GLB_Pos (4U) +#define SYSCFG_ITLINE29_SR_USART6_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART6_GLB_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE29_SR_USART6_GLB SYSCFG_ITLINE29_SR_USART6_GLB_Msk /*!< USART6 GLB Interrupt */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g0b1xx + * @{ + */ + +#ifndef STM32G0B1xx_H +#define STM32G0B1xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g0b1xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD through EXTI line 16, PVM (monit. VDDIO2) through EXTI line 34*/ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + USB_UCPD1_2_IRQn = 8, /*!< USB, UCPD1 and UCPD2 global Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1,COMP2, COMP3 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_TIM4_IRQn = 16, /*!< TIM3, TIM4 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_FDCAN_IT0_IRQn = 21, /*!< TIM16, FDCAN1_IT0 and FDCAN2_IT0 Interrupt */ + TIM17_FDCAN_IT1_IRQn = 22, /*!< TIM17, FDCAN1_IT1 and FDCAN2_IT1 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_3_IRQn = 24, /*!< I2C2, I2C3 Interrupt (combined with EXTI 24 and EXTI 22) */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_3_IRQn = 26, /*!< SPI2/I2S2, SPI3/I2S3 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_LPUART2_IRQn = 28, /*!< USART2 + LPUART2 Interrupt */ + USART3_4_5_6_LPUART1_IRQn = 29, /*!< USART3, USART4, USART5, USART6, LPUART1 globlal Interrupts (combined with EXTI 28) */ + CEC_IRQn = 30, /*!< CEC Interrupt(combined with EXTI 27) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ + +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ +} FDCAN_Config_TypeDef; + +/** + * @brief HDMI-CEC + */ +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising Trigger Selection Register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling Trigger Selection Register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software Interrupt event Register 2, Address offset: 0x28 */ + __IO uint32_t RPR2; /*!< EXTI Rising Pending Register 2, Address offset: 0x2C */ + __IO uint32_t FPR2; /*!< EXTI Falling Pending Register 2, Address offset: 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ + uint32_t RESERVED5[2]; /*!< Reserved 5, 0x88 -- 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt Mask Register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event Mask Register 2, Address offset: 0x94 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC bank 1 register, Address offset: 0x18 */ + __IO uint32_t ECC2R; /*!< FLASH ECC bank 2 register, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED5[2]; /*!< Reserved5, Address offset: 0x3C--0x40 */ + __IO uint32_t PCROP2ASR; /*!< FLASH Bank2 PCROP area A Start address register, Address offset: 0x44 */ + __IO uint32_t PCROP2AER; /*!< FLASH Bank2 PCROP area A End address register, Address offset: 0x48 */ + __IO uint32_t WRP2AR; /*!< FLASH Bank2 WRP area A address register, Address offset: 0x4C */ + __IO uint32_t WRP2BR; /*!< FLASH Bank2 WRP area B address register, Address offset: 0x50 */ + __IO uint32_t PCROP2BSR; /*!< FLASH Bank2 PCROP area B Start address register, Address offset: 0x54 */ + __IO uint32_t PCROP2BER; /*!< FLASH Bank2 PCROP area B End address register, Address offset: 0x58 */ + uint32_t RESERVED7[9]; /*!< Reserved7, Address offset: 0x5C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t CRRCR; /*!< RCC Clock Configuration Register, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t CCIPR2; /*!< RCC Peripherals Independent Clocks Configuration Register2, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Dual Role Device + */ + +typedef struct +{ + __IO uint32_t CHEP0R; /*!< USB Channel/Endpoint 0 register, Address offset: 0x00 */ + __IO uint32_t CHEP1R; /*!< USB Channel/Endpoint 1 register, Address offset: 0x04 */ + __IO uint32_t CHEP2R; /*!< USB Channel/Endpoint 2 register, Address offset: 0x08 */ + __IO uint32_t CHEP3R; /*!< USB Channel/Endpoint 3 register, Address offset: 0x0C */ + __IO uint32_t CHEP4R; /*!< USB Channel/Endpoint 4 register, Address offset: 0x10 */ + __IO uint32_t CHEP5R; /*!< USB Channel/Endpoint 5 register, Address offset: 0x14 */ + __IO uint32_t CHEP6R; /*!< USB Channel/Endpoint 6 register, Address offset: 0x18 */ + __IO uint32_t CHEP7R; /*!< USB Channel/Endpoint 7 register, Address offset: 0x1C */ + __IO uint32_t RESERVED0[8]; /*!< Reserved, */ + __IO uint32_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint32_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint32_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint32_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint32_t RESERVED1; /*!< Reserved */ + __IO uint32_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint32_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ +} USB_DRD_TypeDef; + +/** + * @brief Universal Serial Bus PacketMemoryArea Buffer Descriptor Table + */ +typedef struct +{ + __IO uint32_t TXBD; /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_TAMP3E_Pos (2U) +#define TAMP_CR1_TAMP3E_Msk (0x1UL << TAMP_CR1_TAMP3E_Pos) /*!< 0x00000004 */ +#define TAMP_CR1_TAMP3E TAMP_CR1_TAMP3E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP3NOERASE_Pos (2U) +#define TAMP_CR2_TAMP3NOERASE_Msk (0x1UL << TAMP_CR2_TAMP3NOERASE_Pos) /*!< 0x00000004 */ +#define TAMP_CR2_TAMP3NOERASE TAMP_CR2_TAMP3NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP3MSK_Pos (18U) +#define TAMP_CR2_TAMP3MSK_Msk (0x1UL << TAMP_CR2_TAMP3MSK_Pos) /*!< 0x00040000 */ +#define TAMP_CR2_TAMP3MSK TAMP_CR2_TAMP3MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk +#define TAMP_CR2_TAMP3TRG_Pos (26U) +#define TAMP_CR2_TAMP3TRG_Msk (0x1UL << TAMP_CR2_TAMP3TRG_Pos) /*!< 0x04000000 */ +#define TAMP_CR2_TAMP3TRG TAMP_CR2_TAMP3TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_TAMP3IE_Pos (2U) +#define TAMP_IER_TAMP3IE_Msk (0x1UL << TAMP_IER_TAMP3IE_Pos) /*!< 0x00000004 */ +#define TAMP_IER_TAMP3IE TAMP_IER_TAMP3IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_TAMP3F_Pos (2U) +#define TAMP_SR_TAMP3F_Msk (0x1UL << TAMP_SR_TAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SR_TAMP3F TAMP_SR_TAMP3F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_TAMP3MF_Pos (2U) +#define TAMP_MISR_TAMP3MF_Msk (0x1UL << TAMP_MISR_TAMP3MF_Pos) /*!< 0x00000004 */ +#define TAMP_MISR_TAMP3MF TAMP_MISR_TAMP3MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CTAMP3F_Pos (2U) +#define TAMP_SCR_CTAMP3F_Msk (0x1UL << TAMP_SCR_CTAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SCR_CTAMP3F TAMP_SCR_CTAMP3F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE1_SR_PVMOUT_Pos (1U) +#define SYSCFG_ITLINE1_SR_PVMOUT_Msk (0x1UL << SYSCFG_ITLINE1_SR_PVMOUT_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE1_SR_PVMOUT SYSCFG_ITLINE1_SR_PVMOUT_Msk /*!< VDDUSB Power voltage monitor -> exti[34] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE4_SR_CRS_Pos (1U) +#define SYSCFG_ITLINE4_SR_CRS_Msk (0x1UL << SYSCFG_ITLINE4_SR_CRS_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE4_SR_CRS SYSCFG_ITLINE4_SR_CRS_Msk /*!< CRS interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE8_SR_UCPD1_Pos (0U) +#define SYSCFG_ITLINE8_SR_UCPD1_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE8_SR_UCPD1 SYSCFG_ITLINE8_SR_UCPD1_Msk /*!< UCPD1 -> exti[32] Interrupt */ +#define SYSCFG_ITLINE8_SR_UCPD2_Pos (1U) +#define SYSCFG_ITLINE8_SR_UCPD2_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD2_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE8_SR_UCPD2 SYSCFG_ITLINE8_SR_UCPD2_Msk /*!< UCPD2 -> exti[33] Interrupt */ +#define SYSCFG_ITLINE8_SR_USB_Pos (2U) +#define SYSCFG_ITLINE8_SR_USB_Msk (0x1UL << SYSCFG_ITLINE8_SR_USB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE8_SR_USB SYSCFG_ITLINE8_SR_USB_Msk /*!< USB Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Pos (5U) +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH1_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1 SYSCFG_ITLINE11_SR_DMA2_CH1_Msk /*!< DMA2 Channel 1 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Pos (6U) +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH2_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2 SYSCFG_ITLINE11_SR_DMA2_CH2_Msk /*!< DMA2 Channel 2 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Pos (7U) +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH3_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3 SYSCFG_ITLINE11_SR_DMA2_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Pos (8U) +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH4_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4 SYSCFG_ITLINE11_SR_DMA2_CH4_Msk /*!< DMA2 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Pos (9U) +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH5_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5 SYSCFG_ITLINE11_SR_DMA2_CH5_Msk /*!< DMA2 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE12_SR_COMP3_Pos (3U) +#define SYSCFG_ITLINE12_SR_COMP3_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP3_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE12_SR_COMP3 SYSCFG_ITLINE12_SR_COMP3_Msk /*!< COMP3 Interrupt -> exti[20] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Pos (1U) +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB SYSCFG_ITLINE16_SR_TIM4_GLB_Msk /*!< TIM4 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos (1U) +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0 SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk /*!< FDCAN1 IT0 Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos (2U) +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0 SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk /*!< FDCAN2 IT0 Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos (1U) +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1 SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk /*!< FDCAN1 IT1 Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos (2U) +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1 SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk /*!< FDCAN2 IT1 Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Pos (1U) +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C3_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE24_SR_I2C3_GLB SYSCFG_ITLINE24_SR_I2C3_GLB_Msk /*!< I2C3 GLB Interrupt -> exti[24]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI3_Pos (1U) +#define SYSCFG_ITLINE26_SR_SPI3_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE26_SR_SPI3 SYSCFG_ITLINE26_SR_SPI3_Msk /*!< SPI3 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos (1U) +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk /*!< LPUART2 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE29_SR_USART5_GLB_Pos (3U) +#define SYSCFG_ITLINE29_SR_USART5_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART5_GLB_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE29_SR_USART5_GLB SYSCFG_ITLINE29_SR_USART5_GLB_Msk /*!< USART5 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART6_GLB_Pos (4U) +#define SYSCFG_ITLINE29_SR_USART6_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART6_GLB_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE29_SR_USART6_GLB SYSCFG_ITLINE29_SR_USART6_GLB_Msk /*!< USART6 GLB Interrupt */ +#define SYSCFG_ITLINE30_SR_CEC_Pos (0U) +#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1UL << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt-> exti[27] */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g0c1xx + * @{ + */ + +#ifndef STM32G0C1xx_H +#define STM32G0C1xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g0c1xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD through EXTI line 16, PVM (monit. VDDIO2) through EXTI line 34*/ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + USB_UCPD1_2_IRQn = 8, /*!< USB, UCPD1 and UCPD2 global Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1,COMP2, COMP3 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_TIM4_IRQn = 16, /*!< TIM3, TIM4 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_FDCAN_IT0_IRQn = 21, /*!< TIM16, FDCAN1_IT0 and FDCAN2_IT0 Interrupt */ + TIM17_FDCAN_IT1_IRQn = 22, /*!< TIM17, FDCAN1_IT1 and FDCAN2_IT1 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_3_IRQn = 24, /*!< I2C2, I2C3 Interrupt (combined with EXTI 24 and EXTI 22) */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_3_IRQn = 26, /*!< SPI2/I2S2, SPI3/I2S3 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_LPUART2_IRQn = 28, /*!< USART2 + LPUART2 Interrupt */ + USART3_4_5_6_LPUART1_IRQn = 29, /*!< USART3, USART4, USART5, USART6, LPUART1 globlal Interrupts (combined with EXTI 28) */ + CEC_IRQn = 30, /*!< CEC Interrupt(combined with EXTI 27) */ + AES_RNG_IRQn = 31, /*!< AES & RNG Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ + +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ +} FDCAN_Config_TypeDef; + +/** + * @brief HDMI-CEC + */ +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising Trigger Selection Register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling Trigger Selection Register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software Interrupt event Register 2, Address offset: 0x28 */ + __IO uint32_t RPR2; /*!< EXTI Rising Pending Register 2, Address offset: 0x2C */ + __IO uint32_t FPR2; /*!< EXTI Falling Pending Register 2, Address offset: 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ + uint32_t RESERVED5[2]; /*!< Reserved 5, 0x88 -- 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt Mask Register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event Mask Register 2, Address offset: 0x94 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC bank 1 register, Address offset: 0x18 */ + __IO uint32_t ECC2R; /*!< FLASH ECC bank 2 register, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED5[2]; /*!< Reserved5, Address offset: 0x3C--0x40 */ + __IO uint32_t PCROP2ASR; /*!< FLASH Bank2 PCROP area A Start address register, Address offset: 0x44 */ + __IO uint32_t PCROP2AER; /*!< FLASH Bank2 PCROP area A End address register, Address offset: 0x48 */ + __IO uint32_t WRP2AR; /*!< FLASH Bank2 WRP area A address register, Address offset: 0x4C */ + __IO uint32_t WRP2BR; /*!< FLASH Bank2 WRP area B address register, Address offset: 0x50 */ + __IO uint32_t PCROP2BSR; /*!< FLASH Bank2 PCROP area B Start address register, Address offset: 0x54 */ + __IO uint32_t PCROP2BER; /*!< FLASH Bank2 PCROP area B End address register, Address offset: 0x58 */ + uint32_t RESERVED7[9]; /*!< Reserved7, Address offset: 0x5C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t CRRCR; /*!< RCC Clock Configuration Register, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t CCIPR2; /*!< RCC Peripherals Independent Clocks Configuration Register2, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Dual Role Device + */ + +typedef struct +{ + __IO uint32_t CHEP0R; /*!< USB Channel/Endpoint 0 register, Address offset: 0x00 */ + __IO uint32_t CHEP1R; /*!< USB Channel/Endpoint 1 register, Address offset: 0x04 */ + __IO uint32_t CHEP2R; /*!< USB Channel/Endpoint 2 register, Address offset: 0x08 */ + __IO uint32_t CHEP3R; /*!< USB Channel/Endpoint 3 register, Address offset: 0x0C */ + __IO uint32_t CHEP4R; /*!< USB Channel/Endpoint 4 register, Address offset: 0x10 */ + __IO uint32_t CHEP5R; /*!< USB Channel/Endpoint 5 register, Address offset: 0x14 */ + __IO uint32_t CHEP6R; /*!< USB Channel/Endpoint 6 register, Address offset: 0x18 */ + __IO uint32_t CHEP7R; /*!< USB Channel/Endpoint 7 register, Address offset: 0x1C */ + __IO uint32_t RESERVED0[8]; /*!< Reserved, */ + __IO uint32_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint32_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint32_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint32_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint32_t RESERVED1; /*!< Reserved */ + __IO uint32_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint32_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ +} USB_DRD_TypeDef; + +/** + * @brief Universal Serial Bus PacketMemoryArea Buffer Descriptor Table + */ +typedef struct +{ + __IO uint32_t TXBD; /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_TAMP3E_Pos (2U) +#define TAMP_CR1_TAMP3E_Msk (0x1UL << TAMP_CR1_TAMP3E_Pos) /*!< 0x00000004 */ +#define TAMP_CR1_TAMP3E TAMP_CR1_TAMP3E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP3NOERASE_Pos (2U) +#define TAMP_CR2_TAMP3NOERASE_Msk (0x1UL << TAMP_CR2_TAMP3NOERASE_Pos) /*!< 0x00000004 */ +#define TAMP_CR2_TAMP3NOERASE TAMP_CR2_TAMP3NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP3MSK_Pos (18U) +#define TAMP_CR2_TAMP3MSK_Msk (0x1UL << TAMP_CR2_TAMP3MSK_Pos) /*!< 0x00040000 */ +#define TAMP_CR2_TAMP3MSK TAMP_CR2_TAMP3MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk +#define TAMP_CR2_TAMP3TRG_Pos (26U) +#define TAMP_CR2_TAMP3TRG_Msk (0x1UL << TAMP_CR2_TAMP3TRG_Pos) /*!< 0x04000000 */ +#define TAMP_CR2_TAMP3TRG TAMP_CR2_TAMP3TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_TAMP3IE_Pos (2U) +#define TAMP_IER_TAMP3IE_Msk (0x1UL << TAMP_IER_TAMP3IE_Pos) /*!< 0x00000004 */ +#define TAMP_IER_TAMP3IE TAMP_IER_TAMP3IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_TAMP3F_Pos (2U) +#define TAMP_SR_TAMP3F_Msk (0x1UL << TAMP_SR_TAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SR_TAMP3F TAMP_SR_TAMP3F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_TAMP3MF_Pos (2U) +#define TAMP_MISR_TAMP3MF_Msk (0x1UL << TAMP_MISR_TAMP3MF_Pos) /*!< 0x00000004 */ +#define TAMP_MISR_TAMP3MF TAMP_MISR_TAMP3MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CTAMP3F_Pos (2U) +#define TAMP_SCR_CTAMP3F_Msk (0x1UL << TAMP_SCR_CTAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SCR_CTAMP3F TAMP_SCR_CTAMP3F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE1_SR_PVMOUT_Pos (1U) +#define SYSCFG_ITLINE1_SR_PVMOUT_Msk (0x1UL << SYSCFG_ITLINE1_SR_PVMOUT_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE1_SR_PVMOUT SYSCFG_ITLINE1_SR_PVMOUT_Msk /*!< VDDUSB Power voltage monitor -> exti[34] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE4_SR_CRS_Pos (1U) +#define SYSCFG_ITLINE4_SR_CRS_Msk (0x1UL << SYSCFG_ITLINE4_SR_CRS_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE4_SR_CRS SYSCFG_ITLINE4_SR_CRS_Msk /*!< CRS interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE8_SR_UCPD1_Pos (0U) +#define SYSCFG_ITLINE8_SR_UCPD1_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE8_SR_UCPD1 SYSCFG_ITLINE8_SR_UCPD1_Msk /*!< UCPD1 -> exti[32] Interrupt */ +#define SYSCFG_ITLINE8_SR_UCPD2_Pos (1U) +#define SYSCFG_ITLINE8_SR_UCPD2_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD2_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE8_SR_UCPD2 SYSCFG_ITLINE8_SR_UCPD2_Msk /*!< UCPD2 -> exti[33] Interrupt */ +#define SYSCFG_ITLINE8_SR_USB_Pos (2U) +#define SYSCFG_ITLINE8_SR_USB_Msk (0x1UL << SYSCFG_ITLINE8_SR_USB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE8_SR_USB SYSCFG_ITLINE8_SR_USB_Msk /*!< USB Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Pos (5U) +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH1_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1 SYSCFG_ITLINE11_SR_DMA2_CH1_Msk /*!< DMA2 Channel 1 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Pos (6U) +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH2_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2 SYSCFG_ITLINE11_SR_DMA2_CH2_Msk /*!< DMA2 Channel 2 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Pos (7U) +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH3_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3 SYSCFG_ITLINE11_SR_DMA2_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Pos (8U) +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH4_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4 SYSCFG_ITLINE11_SR_DMA2_CH4_Msk /*!< DMA2 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Pos (9U) +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH5_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5 SYSCFG_ITLINE11_SR_DMA2_CH5_Msk /*!< DMA2 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE12_SR_COMP3_Pos (3U) +#define SYSCFG_ITLINE12_SR_COMP3_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP3_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE12_SR_COMP3 SYSCFG_ITLINE12_SR_COMP3_Msk /*!< COMP3 Interrupt -> exti[20] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Pos (1U) +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB SYSCFG_ITLINE16_SR_TIM4_GLB_Msk /*!< TIM4 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos (1U) +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0 SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk /*!< FDCAN1 IT0 Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos (2U) +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0 SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk /*!< FDCAN2 IT0 Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos (1U) +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1 SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk /*!< FDCAN1 IT1 Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos (2U) +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1 SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk /*!< FDCAN2 IT1 Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Pos (1U) +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C3_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE24_SR_I2C3_GLB SYSCFG_ITLINE24_SR_I2C3_GLB_Msk /*!< I2C3 GLB Interrupt -> exti[24]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI3_Pos (1U) +#define SYSCFG_ITLINE26_SR_SPI3_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE26_SR_SPI3 SYSCFG_ITLINE26_SR_SPI3_Msk /*!< SPI3 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos (1U) +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk /*!< LPUART2 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE29_SR_USART5_GLB_Pos (3U) +#define SYSCFG_ITLINE29_SR_USART5_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART5_GLB_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE29_SR_USART5_GLB SYSCFG_ITLINE29_SR_USART5_GLB_Msk /*!< USART5 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART6_GLB_Pos (4U) +#define SYSCFG_ITLINE29_SR_USART6_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART6_GLB_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE29_SR_USART6_GLB SYSCFG_ITLINE29_SR_USART6_GLB_Msk /*!< USART6 GLB Interrupt */ +#define SYSCFG_ITLINE30_SR_CEC_Pos (0U) +#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1UL << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt-> exti[27] */ +#define SYSCFG_ITLINE31_SR_RNG_Pos (0U) +#define SYSCFG_ITLINE31_SR_RNG_Msk (0x1UL << SYSCFG_ITLINE31_SR_RNG_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE31_SR_RNG SYSCFG_ITLINE31_SR_RNG_Msk /*!< RNG Interrupt */ +#define SYSCFG_ITLINE31_SR_AES_Pos (1U) +#define SYSCFG_ITLINE31_SR_AES_Msk (0x1UL << SYSCFG_ITLINE31_SR_AES_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE31_SR_AES SYSCFG_ITLINE31_SR_AES_Msk /*!< AES Interrupt */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!
© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32g0xx + * @{ + */ + +#ifndef STM32G0xx_H +#define STM32G0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32G0) +#define STM32G0 +#endif /* STM32G0 */ + +/* Uncomment the line below according to the target STM32G0 device used in your + application + */ + +#if !defined (STM32G071xx) && !defined (STM32G081xx) && !defined (STM32G070xx) \ + && !defined (STM32G030xx) && !defined (STM32G031xx) && !defined (STM32G041xx) \ + && !defined (STM32G0B0xx) && !defined (STM32G0B1xx) && !defined (STM32G0C1xx) \ + && !defined (STM32G050xx) && !defined (STM32G051xx) && !defined (STM32G061xx) + /* #define STM32G0B0xx */ /*!< STM32G0B0xx Devices */ + /* #define STM32G0B1xx */ /*!< STM32G0B1xx Devices */ + /* #define STM32G0C1xx */ /*!< STM32G0C1xx Devices */ + /* #define STM32G070xx */ /*!< STM32G070xx Devices */ + /* #define STM32G071xx */ /*!< STM32G071xx Devices */ + /* #define STM32G081xx */ /*!< STM32G081xx Devices */ + /* #define STM32G050xx */ /*!< STM32G050xx Devices */ + /* #define STM32G051xx */ /*!< STM32G051xx Devices */ + /* #define STM32G061xx */ /*!< STM32G061xx Devices */ + /* #define STM32G030xx */ /*!< STM32G030xx Devices */ + /* #define STM32G031xx */ /*!< STM32G031xx Devices */ + /* #define STM32G041xx */ /*!< STM32G041xx Devices */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number $VERSION$ + */ +#define __STM32G0_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32G0_CMSIS_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */ +#define __STM32G0_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32G0_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32G0_CMSIS_VERSION ((__STM32G0_CMSIS_VERSION_MAIN << 24)\ + |(__STM32G0_CMSIS_VERSION_SUB1 << 16)\ + |(__STM32G0_CMSIS_VERSION_SUB2 << 8 )\ + |(__STM32G0_CMSIS_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32G0B1xx) + #include "stm32g0b1xx.h" +#elif defined(STM32G0C1xx) + #include "stm32g0c1xx.h" +#elif defined(STM32G0B0xx) + #include "stm32g0b0xx.h" +#elif defined(STM32G071xx) + #include "stm32g071xx.h" +#elif defined(STM32G081xx) + #include "stm32g081xx.h" +#elif defined(STM32G070xx) + #include "stm32g070xx.h" +#elif defined(STM32G031xx) + #include "stm32g031xx.h" +#elif defined(STM32G041xx) + #include "stm32g041xx.h" +#elif defined(STM32G030xx) + #include "stm32g030xx.h" +#elif defined(STM32G051xx) + #include "stm32g051xx.h" +#elif defined(STM32G061xx) + #include "stm32g061xx.h" +#elif defined(STM32G050xx) + #include "stm32g050xx.h" +#else + #error "Please select first the target STM32G0xx device used in your application (in stm32g0xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + SUCCESS = 0, + ERROR = !SUCCESS +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/*#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))*/ +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32g0xx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32G0xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h b/USB-PD_Provider_1port/Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h new file mode 100644 index 0000000..4049967 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h @@ -0,0 +1,106 @@ +/** + ****************************************************************************** + * @file system_stm32g0xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device System Source File for STM32G0xx devices. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32g0xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef SYSTEM_STM32G0XX_H +#define SYSTEM_STM32G0XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32G0xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32G0xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +extern const uint32_t AHBPrescTable[16]; /*!< AHB prescalers table values */ +extern const uint32_t APBPrescTable[8]; /*!< APB prescalers table values */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G0xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*SYSTEM_STM32G0XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armcc.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armcc.h new file mode 100644 index 0000000..da9d654 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armcc.h @@ -0,0 +1,894 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.1.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + +/* CMSIS compiler control DSP macros */ +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __ARM_FEATURE_DSP 1 +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __memory_changed() +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() do {\ + __schedule_barrier();\ + __isb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() do {\ + __schedule_barrier();\ + __dsb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() do {\ + __schedule_barrier();\ + __dmb(0xF);\ + __schedule_barrier();\ + } while (0U) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armclang.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..478f75b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1444 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armclang_ltm.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armclang_ltm.h new file mode 100644 index 0000000..1b5a965 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_armclang_ltm.h @@ -0,0 +1,1891 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_compiler.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..21a2c71 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_gcc.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..1e08e7e --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2168 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section(".vectors"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_iccarm.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..7af7562 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,964 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.1.0 + * @date 08. May 2019 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2019 IAR Systems +// Copyright (c) 2017-2019 Arm Limited. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_version.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..3174cf6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.3 + * @date 24. June 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv81mml.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000..8cee930 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,2968 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 15. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +#define __ARM_ARCH_8M_MAIN__ 1 // patching for now +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (0x1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv8mbl.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..266f180 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1921 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv8mml.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..ba5d83f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2835 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. September 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm0.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..70e4505 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,952 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = 0x0U; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = 0x0U; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm0plus.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..fe7b424 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1085 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm1.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..44c2a49 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,979 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.1 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm23.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..49f4a5b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1996 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm3.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..1f69e8b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1937 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm33.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..2f1d98e --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm35p.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000..7d34367 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm35p.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm4.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..90c2a72 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2124 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm7.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..3da3c43 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2725 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.1.1 + * @date 28. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_sc000.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..f315013 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1025 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_sc300.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..ad031f2 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1912 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 31. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/mpu_armv7.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..337eb65 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,272 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/mpu_armv8.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..2fe28b6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,346 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/USB-PD_Provider_1port/Drivers/CMSIS/Include/tz_context.h b/USB-PD_Provider_1port/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..d4c1474 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..8d44e18 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3783 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ + +#if defined(STM32L1) + #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) + #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW + #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM + #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the events that can be selected to configure the + * set/reset crossbar of a timer output + */ +#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) +#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) +#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) +#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) +#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) +#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) +#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) +#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) +#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) + +#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) +#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) +#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) +#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) +#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) +#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) +#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) +#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) +#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) + +/** @brief Constants defining the event filtering applied to external events + * by a timer + */ +#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) + #define I2S_IT_TXE I2S_IT_TXP + #define I2S_IT_RXNE I2S_IT_RXP + + #define I2S_FLAG_TXE I2S_FLAG_TXP + #define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) + #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT + +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + + #define SPI_FLAG_TXE SPI_FLAG_TXP + #define SPI_FLAG_RXNE SPI_FLAG_RXP + + #define SPI_IT_TXE SPI_IT_TXP + #define SPI_IT_RXNE SPI_IT_RXP + + #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET + #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET + #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET + #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + + /** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ + /** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + + /** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else + #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG + #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG + #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG + #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) + #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32_assert_template.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32_assert_template.h new file mode 100644 index 0000000..f9b1102 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32_assert_template.h @@ -0,0 +1,57 @@ +/** + ****************************************************************************** + * @file stm32_assert.h + * @author MCD Application Team + * @brief STM32 assert template file. + * This file should be copied to the application folder and renamed + * to stm32_assert.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_ASSERT_H +#define STM32_ASSERT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Includes ------------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_ASSERT_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h new file mode 100644 index 0000000..7e896a2 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h @@ -0,0 +1,839 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_H +#define STM32G0xx_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_conf.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH 0x00000000U /*!< Main Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x0000 0000 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Break Break + * @{ + */ +#define SYSCFG_BREAK_SP SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM Parity error signal with Break Input of TIM1/15/16/17 */ +#if defined(SYSCFG_CFGR2_PVDL) +#define SYSCFG_BREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#endif /* SYSCFG_CFGR2_PVDL */ +#define SYSCFG_BREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM0+ with Break Input of TIM1/15/16/17 */ +#define SYSCFG_BREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC of CortexM0+ with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @defgroup SYSCFG_ClampingDiode Clamping Diode + * @{ + */ +#define SYSCFG_CDEN_PA1 SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping Diode on PA1 */ +#define SYSCFG_CDEN_PA3 SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping Diode on PA3 */ +#define SYSCFG_CDEN_PA5 SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping Diode on PA5 */ +#define SYSCFG_CDEN_PA6 SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping Diode on PA6 */ +#define SYSCFG_CDEN_PA13 SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping Diode on PA13 */ +#define SYSCFG_CDEN_PB0 SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping Diode on PB0 */ +#define SYSCFG_CDEN_PB1 SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping Diode on PB1 */ +#define SYSCFG_CDEN_PB2 SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping Diode on PB2 */ + +/** + * @} + */ +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @defgroup HAL_Pin_remapping Pin remapping + * @{ + */ +/* Only available on cut2.0 */ +#define SYSCFG_REMAP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves digitally as PA9 GPIO pin */ +#define SYSCFG_REMAP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves digitally as PA10 GPIO pin */ +/** + * @} + */ + +/** @defgroup HAL_IR_ENV_SEL IR Modulation Envelope signal selection + * @{ + */ +#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IR Modulation envelope source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IR Modulation envelope source */ +#if defined(USART4) +#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IR Modulation envelope source */ +#else +#define HAL_SYSCFG_IRDA_ENV_SEL_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IR Modulation envelope source */ +#endif /* USART4 */ + +/** + * @} + */ + +/** @defgroup HAL_IR_POL_SEL IR output polarity selection + * @{ + */ +#define HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED 0x00000000U /*!< 00: IR output polarity not inverted */ +#define HAL_SYSCFG_IRDA_POLARITY_INVERTED SYSCFG_CFGR1_IR_POL /*!< 01: IR output polarity inverted */ + +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale + * @{ + */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0: VREF_OUT1 around 2.048 V. + This requires VDDA equal to or higher than 2.4 V. */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1: VREF_OUT1 around 2.5 V. + This requires VDDA equal to or higher than 2.8 V. */ + +/** + * @} + */ + +/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance + * @{ + */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0x00000000U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast mode Plus on GPIO + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast mode Plus on PB9 */ +#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast mode Plus on PA9 */ +#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast mode Plus on PA10 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FastModePlus_I2Cx Fast mode Plus driving capability activation for I2Cx + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast mode Plus on I2C1 */ +#define SYSCFG_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast mode Plus on I2C2 */ +#if defined (I2C3) +#define SYSCFG_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast mode Plus on I2C3 */ +#endif /* I2C3 */ + +/** + * @} + */ +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +/** @defgroup SYSCFG_UCPDx_STROBE SYSCFG Dead Battery feature configuration + * @{ + */ +#define SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 Dead battery sw configuration */ +#define SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 Dead battery sw configuration */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_UCPD1_STROBE) || SYSCFG_CFGR1_UCPD2_STROBE */ + +/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper + * @brief ISR Wrapper + * @{ + */ +#define HAL_SYSCFG_ITLINE0 0x00000000U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE1 0x00000001U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE2 0x00000002U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE3 0x00000003U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE4 0x00000004U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE5 0x00000005U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE6 0x00000006U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE7 0x00000007U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE8 0x00000008U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE9 0x00000009U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE10 0x0000000AU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE11 0x0000000BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE12 0x0000000CU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE13 0x0000000DU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE14 0x0000000EU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE15 0x0000000FU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE16 0x00000010U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE17 0x00000011U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE18 0x00000012U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE19 0x00000013U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE20 0x00000014U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE21 0x00000015U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE22 0x00000016U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE23 0x00000017U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE24 0x00000018U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE25 0x00000019U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE26 0x0000001AU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE27 0x0000001BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE28 0x0000001CU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE29 0x0000001DU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE30 0x0000001EU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE31 0x0000001FU /*!< Internal define for macro handling */ + +#define HAL_ITLINE_WWDG ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG) /*!< WWDG has expired .... */ +#if defined (PWR_PVD_SUPPORT) +#define HAL_ITLINE_PVDOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT) /*!< Power voltage detection Interrupt .... */ +#endif /* PWR_PVD_SUPPORT */ +#if defined (PWR_PVM_SUPPORT) +#define HAL_ITLINE_PVMOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVMOUT) /*!< Power voltage monitor Interrupt .... */ +#endif /* PWR_PVM_SUPPORT */ +#define HAL_ITLINE_RTC ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC) /*!< RTC -> exti[19] Interrupt */ +#define HAL_ITLINE_TAMPER ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_TAMPER) /*!< TAMPER -> exti[21] interrupt .... */ +#define HAL_ITLINE_FLASH_ECC ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ECC) /*!< Flash ECC Interrupt */ +#define HAL_ITLINE_FLASH_ITF ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF) /*!< Flash ITF Interrupt */ +#define HAL_ITLINE_CLK_CTRL ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL) /*!< CLK Control Interrupt */ +#if defined (CRS) +#define HAL_ITLINE_CRS ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS) /*!< CRS Interrupt */ +#endif /*CRS */ +#define HAL_ITLINE_EXTI0 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0) /*!< External Interrupt 0 */ +#define HAL_ITLINE_EXTI1 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1) /*!< External Interrupt 1 */ +#define HAL_ITLINE_EXTI2 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2) /*!< External Interrupt 2 */ +#define HAL_ITLINE_EXTI3 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3) /*!< External Interrupt 3 */ +#define HAL_ITLINE_EXTI4 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4) /*!< EXTI4 Interrupt */ +#define HAL_ITLINE_EXTI5 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5) /*!< EXTI5 Interrupt */ +#define HAL_ITLINE_EXTI6 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6) /*!< EXTI6 Interrupt */ +#define HAL_ITLINE_EXTI7 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7) /*!< EXTI7 Interrupt */ +#define HAL_ITLINE_EXTI8 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8) /*!< EXTI8 Interrupt */ +#define HAL_ITLINE_EXTI9 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9) /*!< EXTI9 Interrupt */ +#define HAL_ITLINE_EXTI10 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10) /*!< EXTI10 Interrupt */ +#define HAL_ITLINE_EXTI11 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11) /*!< EXTI11 Interrupt */ +#define HAL_ITLINE_EXTI12 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12) /*!< EXTI12 Interrupt */ +#define HAL_ITLINE_EXTI13 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13) /*!< EXTI13 Interrupt */ +#define HAL_ITLINE_EXTI14 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14) /*!< EXTI14 Interrupt */ +#define HAL_ITLINE_EXTI15 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15) /*!< EXTI15 Interrupt */ +#if defined (UCPD1) +#define HAL_ITLINE_UCPD1 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD1) /*!< UCPD1 Interrupt */ +#endif /* UCPD1 */ +#if defined (UCPD2) +#define HAL_ITLINE_UCPD2 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD2) /*!< UCPD2 Interrupt */ +#endif /* UCPD2 */ +#if defined (STM32G0C1xx) || defined (STM32G0B1xx) || defined (STM32G0B0xx) +#define HAL_ITLINE_USB ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_USB) /*!< USB Interrupt */ +#endif /* STM32G0C1xx) || STM32G0B1xx) || STM32G0B0xx */ +#define HAL_ITLINE_DMA1_CH1 ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1) /*!< DMA1 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA1_CH2 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2) /*!< DMA1 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH3 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3) /*!< DMA1 Channel 3 Interrupt */ +#define HAL_ITLINE_DMAMUX1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMAMUX1) /*!< DMAMUX1 Interrupt */ +#define HAL_ITLINE_DMA1_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4) /*!< DMA1 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA1_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5) /*!< DMA1 Channel 5 Interrupt */ +#if defined(DMA1_Channel7) +#define HAL_ITLINE_DMA1_CH6 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6) /*!< DMA1 Channel 6 Interrupt */ +#define HAL_ITLINE_DMA1_CH7 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7) /*!< DMA1 Channel 7 Interrupt */ +#endif /* DMA1_Channel7 */ +#if defined (DMA2) +#define HAL_ITLINE_DMA2_CH1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH1) /*!< DMA2 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA2_CH2 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH2) /*!< DMA2 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA2_CH3 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3) /*!< DMA2 Channel 3 Interrupt */ +#define HAL_ITLINE_DMA2_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4) /*!< DMA2 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA2_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5) /*!< DMA2 Channel 5 Interrupt */ +#endif /* DMA2 */ +#define HAL_ITLINE_ADC ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC) /*!< ADC Interrupt */ +#if defined (COMP1) +#define HAL_ITLINE_COMP1 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1) /*!< COMP1 Interrupt -> exti[17] */ +#endif /* COMP1 */ +#if defined (COMP2) +#define HAL_ITLINE_COMP2 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2) /*!< COMP2 Interrupt -> exti[18] */ +#endif /* COMP2 */ +#if defined (COMP3) +#define HAL_ITLINE_COMP3 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP3) /*!< COMP3 Interrupt -> exti[1x] */ +#endif /* COMP3 */ +#define HAL_ITLINE_TIM1_BRK ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK) /*!< TIM1 BRK Interrupt */ +#define HAL_ITLINE_TIM1_UPD ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD) /*!< TIM1 UPD Interrupt */ +#define HAL_ITLINE_TIM1_TRG ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG) /*!< TIM1 TRG Interrupt */ +#define HAL_ITLINE_TIM1_CCU ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU) /*!< TIM1 CCU Interrupt */ +#define HAL_ITLINE_TIM1_CC ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC) /*!< TIM1 CC Interrupt */ +#if defined (TIM2) +#define HAL_ITLINE_TIM2 ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB) /*!< TIM2 Interrupt */ +#endif /* TIM2 */ +#define HAL_ITLINE_TIM3 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB) /*!< TIM3 Interrupt */ +#if defined (TIM4) +#define HAL_ITLINE_TIM4 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM4_GLB) /*!< TIM4 Interrupt */ +#endif /* TIM4 */ +#if defined(TIM6) +#define HAL_ITLINE_TIM6 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB) /*!< TIM6 Interrupt */ +#endif /* TIM6 */ +#if defined(DAC1) +#define HAL_ITLINE_DAC ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC) /*!< DAC Interrupt */ +#endif /* DAC1 */ +#if defined(LPTIM1) +#define HAL_ITLINE_LPTIM1 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_LPTIM1_GLB) /*!< LPTIM1 Interrupt -> exti[29] */ +#endif /* LPTIM1 */ +#if defined(TIM7) +#define HAL_ITLINE_TIM7 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB) /*!< TIM7 Interrupt */ +#endif /* TIM7 */ +#if defined(LPTIM2) +#define HAL_ITLINE_LPTIM2 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_LPTIM2_GLB) /*!< LPTIM2 Interrupt -> exti[30] */ +#endif /* LPTIM2 */ +#define HAL_ITLINE_TIM14 ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB) /*!< TIM14 Interrupt */ +#if defined(TIM15) +#define HAL_ITLINE_TIM15 ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB) /*!< TIM15 Interrupt */ +#endif /* TIM15 */ +#define HAL_ITLINE_TIM16 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB) /*!< TIM16 Interrupt */ +#if defined (FDCAN1) || defined (FDCAN2) +#define HAL_ITLINE_FDCAN1_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN1_IT0) /*!< FDCAN1_IT0 Interrupt */ +#define HAL_ITLINE_FDCAN2_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN2_IT0) /*!< FDCAN2_IT0 Interrupt */ +#endif /* FDCAN1 || FDCAN2 */ +#define HAL_ITLINE_TIM17 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB) /*!< TIM17 Interrupt */ +#if defined (FDCAN1) || defined (FDCAN2) +#define HAL_ITLINE_FDCAN1_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN1_IT1) /*!< FDCAN1_IT1 Interrupt */ +#define HAL_ITLINE_FDCAN2_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN2_IT1) /*!< FDCAN2_IT1 Interrupt */ +#endif /* FDCAN1 || FDCAN2 */ +#define HAL_ITLINE_I2C1 ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB) /*!< I2C1 Interrupt -> exti[23] */ +#define HAL_ITLINE_I2C2 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB) /*!< I2C2 Interrupt -> exti[24] */ +#if defined (I2C3) +#define HAL_ITLINE_I2C3 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C3_GLB) /*!< I2C3 Interrupt -> exti[22] */ +#endif /* I2C3 */ +#define HAL_ITLINE_SPI1 ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1) /*!< SPI1 Interrupt */ +#define HAL_ITLINE_SPI2 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2) /*!< SPI2 Interrupt */ +#if defined (SPI3) +#define HAL_ITLINE_SPI3 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI3) /*!< SPI3 Interrupt */ +#endif /* SPI3 */ +#define HAL_ITLINE_USART1 ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB) /*!< USART1 GLB Interrupt -> exti[25] */ +#define HAL_ITLINE_USART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB) /*!< USART2 GLB Interrupt -> exti[26] */ +#if defined (LPUART2) +#define HAL_ITLINE_LPUART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_LPUART2_GLB) /*!< LPUART2 GLB Interrupt -> exti[26] */ +#endif /* LPUART2 */ +#if defined(USART3) +#define HAL_ITLINE_USART3 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB) /*!< USART3 Interrupt .... */ +#endif /* USART3 */ +#if defined(USART4) +#define HAL_ITLINE_USART4 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB) /*!< USART4 Interrupt .... */ +#endif /* USART4 */ +#if defined (LPUART1) +#define HAL_ITLINE_LPUART1 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_LPUART1_GLB) /*!< LPUART1 Interrupt -> exti[28]*/ +#endif /* LPUART1 */ +#if defined (USART5) +#define HAL_ITLINE_USART5 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB) /*!< USART5 Interrupt .... */ +#endif /* USART5 */ +#if defined (USART6) +#define HAL_ITLINE_USART6 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB) /*!< USART6 Interrupt .... */ +#endif /* USART6 */ +#if defined (CEC) +#define HAL_ITLINE_CEC ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC) /*!< CEC Interrupt -> exti[27] */ +#endif /* CEC */ +#if defined (RNG) +#define HAL_ITLINE_RNG ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_RNG) /*!< RNG Interrupt */ +#endif /* RNG */ +#if defined (AES) +#define HAL_ITLINE_AES ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_AES) /*!< AES Interrupt */ +#endif /* AES */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBG_Exported_Macros DBG Exported Macros + * @{ + */ + +/** @brief Freeze and Unfreeze Peripherals in Debug mode + */ +#if defined(DBG_APB_FZ1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM2_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM3_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM4_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM6_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM7_STOP */ + +#if defined(DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#endif /* DBG_APB_FZ1_DBG_RTC_STOP */ + +#if defined(DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#endif /* DBG_APB_FZ1_DBG_WWDG_STOP */ + +#if defined(DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#endif /* DBG_APB_FZ1_DBG_IWDG_STOP */ + +#if defined(DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#endif /* DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP */ + +#if defined(DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#endif /* DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP */ + +#if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) +#endif /* DBG_APB_FZ1_DBG_LPTIM1_STOP */ + +#if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) +#endif /* DBG_APB_FZ1_DBG_LPTIM2_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM1_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM14_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM15_STOP) +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM15_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM16_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM17_STOP */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** + * @brief ISR wrapper check + * @note Allow to determine interrupt source per line. + */ +#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF)) + +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() \ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, (SYSCFG_CFGR1_MEM_MODE_1|SYSCFG_CFGR1_MEM_MODE_0)) + +/** + * @brief Return the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values @ref SYSCFG_BootMode + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief SYSCFG Break ECC lock. + * Enable and lock the connection of Flash ECC error connection to TIM1 Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL) + + +/** @brief SYSCFG Break Cortex-M0+ Lockup lock. + * Enables and locks the connection of Cortex-M0+ LOCKUP (Hardfault) output to TIM1/15/16/17 Break input + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) + +#if defined(SYSCFG_CFGR2_PVDL) +/** @brief SYSCFG Break PVD lock. + * Enables and locks the PVD connection with Timer1/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR register + * @note The selected configuration is locked and can be unlocked only by system reset + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL) +#endif /* SYSCFG_CFGR2_PVDL */ + +/** @brief SYSCFG Break SRAM PARITY lock + * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/15/16/17 + * @note The selected configuration is locked and can only be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() SET_BIT(SYSCFG->CFGR2,SYSCFG_CFGR2_SPL) + +/** @brief Parity check on RAM disable macro + * @note Disabling the parity check on RAM locks the configuration bit. + * To re-enable the parity check on RAM perform a system reset. + */ +#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SPF) + +/** @brief Set the PEF bit to clear the SRAM Parity Error Flag. + */ +#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @brief Clamping Diode on specific pins enable/disable macros + * @param __PIN__ This parameter can be a combination of values @ref SYSCFG_ClampingDiode + */ +#define __HAL_SYSCFG_CLAMPINGDIODE_ENABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ + SET_BIT(SYSCFG->CFGR2, (__PIN__));\ + }while(0U) + +#define __HAL_SYSCFG_CLAMPINGDIODE_DISABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ + CLEAR_BIT(SYSCFG->CFGR2, (__PIN__));\ + }while(0U) +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @brief ISR wrapper check + * @note Allow to determine interrupt source per line. + */ +#define __HAL_SYSCFG_GET_PENDING_IT(__SOURCE__) \ + (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFFU)) + +/** @brief selection of the modulation envelope signal macro, using bits [7:6] of SYSCFG_CFGR1 register + * @param __SOURCE__ This parameter can be a value of @ref HAL_IR_ENV_SEL + */ +#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD);\ + SET_BIT(SYSCFG->CFGR1, (__SOURCE__));\ + }while(0U) + +#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0U) + +/** @brief IROut Polarity Selection, using bit[5] of SYSCFG_CFGR1 register + * @param __SEL__ This parameter can be a value of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_IRDA_OUT_POLARITY_SELECTION(__SEL__) do { assert_param(IS_HAL_SYSCFG_IRDA_POL_SEL((__SEL__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL);\ + SET_BIT(SYSCFG->CFGR1,(__SEL__));\ + }while(0U) + +/** + * @brief Return the IROut Polarity mode as configured by user. + * @retval The IROut polarity as configured by user. The returned value can be one + * of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_GET_POLARITY() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL) + +/** @brief Break input to TIM1/15/16/17 capability enable/disable macros + * @param __BREAK__ This parameter can be a value of @ref SYSCFG_Break + */ +#define __HAL_SYSCFG_BREAK_ENABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + SET_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) + +#define __HAL_SYSCFG_BREAK_DISABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + CLEAR_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros + * @{ + */ +#if defined (PWR_PVD_SUPPORT) +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ + ((__CONFIG__) == SYSCFG_BREAK_PVD) || \ + ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) +#else +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ + ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) +#endif /* PWR_PVD_SUPPORT */ + +#if defined(SYSCFG_CDEN_SUPPORT) +#define IS_SYSCFG_CLAMPINGDIODE(__PIN__) ((((__PIN__) & SYSCFG_CDEN_PA1) == SYSCFG_CDEN_PA1) || \ + (((__PIN__) & SYSCFG_CDEN_PA3) == SYSCFG_CDEN_PA3) || \ + (((__PIN__) & SYSCFG_CDEN_PA5) == SYSCFG_CDEN_PA5) || \ + (((__PIN__) & SYSCFG_CDEN_PA6) == SYSCFG_CDEN_PA6) || \ + (((__PIN__) & SYSCFG_CDEN_PA13) == SYSCFG_CDEN_PA13) || \ + (((__PIN__) & SYSCFG_CDEN_PB0) == SYSCFG_CDEN_PB0) || \ + (((__PIN__) & SYSCFG_CDEN_PB1) == SYSCFG_CDEN_PB1) || \ + (((__PIN__) & SYSCFG_CDEN_PB2) == SYSCFG_CDEN_PB2)) +#endif /* SYSCFG_CDEN_SUPPORT */ + +#if defined (USART4) +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4)) +#else +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART2)) +#endif /* USART4 */ +#define IS_HAL_SYSCFG_IRDA_POL_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED) || \ + ((SEL) == HAL_SYSCFG_IRDA_POLARITY_INVERTED)) + +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +#define IS_SYSCFG_DBATT_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_UCPD1_STROBE) || \ + ((__CONFIG__) == SYSCFG_UCPD2_STROBE) || \ + ((__CONFIG__) == (SYSCFG_UCPD1_STROBE | SYSCFG_UCPD2_STROBE))) +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +#if defined(VREFBUF) +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) + +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ + ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) + +#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) +#endif /* VREFBUF */ + +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) + +#define IS_HAL_REMAP_PIN(RMP) (((RMP) == SYSCFG_REMAP_PA11) || \ + ((RMP) == SYSCFG_REMAP_PA12) || \ + ((RMP) == (SYSCFG_REMAP_PA11 | SYSCFG_REMAP_PA12))) +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions + * @{ + */ + +/* Initialization and Configuration functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions + * @{ + */ + +/* DBGMCU Peripheral Control functions *****************************************/ +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions + * @{ + */ + +/* SYSCFG Control functions ****************************************************/ + +#if defined(VREFBUF) +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); +void HAL_SYSCFG_DisableVREFBUF(void); +#endif /* VREFBUF */ + +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap); +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap); +#if defined(SYSCFG_CDEN_SUPPORT) +void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig); +void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig); +#endif /* SYSCFG_CDEN_SUPPORT */ +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery); +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h new file mode 100644 index 0000000..9f3ba0c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h @@ -0,0 +1,1756 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc.h + * @author MCD Application Team + * @brief Header file of ADC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_ADC_H +#define STM32G0xx_HAL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/* Include low level driver */ +#include "stm32g0xx_ll_adc.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief ADC group regular oversampling structure definition + */ +typedef struct +{ + uint32_t Ratio; /*!< Configures the oversampling ratio. + This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ + + uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. + This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ + + uint32_t TriggeredMode; /*!< Selects the regular triggered oversampling mode. + This parameter can be a value of @ref ADC_HAL_EC_OVS_DISCONT_MODE */ + +} ADC_OversamplingTypeDef; + +/** + * @brief Structure definition of ADC instance and ADC group regular. + * @note Parameters of this structure are shared within 2 scopes: + * - Scope entire ADC (differentiation done for compatibility with some other STM32 series featuring ADC groups regular and injected): ClockPrescaler, Resolution, DataAlign, + * ScanConvMode, EOCSelection, LowPowerAutoWait. + * - Scope ADC group regular: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, + * ExternalTrigConv, ExternalTrigConvEdge, DMAContinuousRequests, Overrun, OversamplingMode, Oversampling. + * @note The setting of these parameters by function HAL_ADC_Init() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled + * - For all parameters except 'ClockPrescaler' and 'Resolution': ADC enabled without conversion on going on group regular. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another parameter + * (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from system clock or PLL (Refer to reference manual for list of clocks available)) and clock prescaler. + This parameter can be a value of @ref ADC_HAL_EC_COMMON_CLOCK_SOURCE. + Note: The ADC clock configuration is common to all ADC instances. + Note: In case of synchronous clock mode based on HCLK/1, the configuration must be enabled only + if the system clock has a 50% duty clock cycle (APB prescaler configured inside RCC + must be bypassed and PCLK clock must have 50% duty cycle). Refer to reference manual for details. + Note: In case of usage of asynchronous clock, the selected clock must be preliminarily enabled at RCC top level. + Note: This parameter can be modified only if all ADC instances are disabled. */ + + uint32_t Resolution; /*!< Configure the ADC resolution. + This parameter can be a value of @ref ADC_HAL_EC_RESOLUTION */ + + uint32_t DataAlign; /*!< Specify ADC data alignment in conversion data register (right or left). + Refer to reference manual for alignments formats versus resolutions. + This parameter can be a value of @ref ADC_HAL_EC_DATA_ALIGN */ + + uint32_t ScanConvMode; /*!< Configure the sequencer of ADC group regular. + On this STM32 series, ADC group regular sequencer both modes "fully configurable" or "not fully configurable" are + available: + - sequencer configured to fully configurable: + sequencer length and each rank affectation to a channel are configurable. + - Sequence length: Set number of ranks in the scan sequence. + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from rank 1 to rank n). + - sequencer configured to not fully configurable: + sequencer length and each rank affectation to a channel are fixed by channel HW number. + - Sequence length: Number of ranks in the scan sequence is + defined by number of channels set in the sequence, + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from lowest channel number to + highest channel number). + This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. + Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices): + If only 1 channel is set: Conversion is performed in single mode. + If several channels are set: Conversions are performed in sequence mode. + This parameter can be a value of @ref ADC_Scan_mode */ + + uint32_t EOCSelection; /*!< Specify which EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of unitary conversion or end of sequence conversions. + This parameter can be a value of @ref ADC_EOCSelection. */ + + FunctionalState LowPowerAutoWait; /*!< Select the dynamic low power Auto Delay: new conversion start only when the previous + conversion (for ADC group regular) has been retrieved by user software, + using function HAL_ADC_GetValue(). + This feature automatically adapts the frequency of ADC conversions triggers to the speed of the system that reads the data. Moreover, this avoids risk of overrun + for low frequency applications. + This parameter can be set to ENABLE or DISABLE. + Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC flag (by CPU to free the IRQ pending event or by DMA). + Auto wait will work but fort a very short time, discarding its intended benefit (except specific case of high load of CPU or DMA transfers which can justify usage of auto wait). + Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when ADC conversion data is needed: + use HAL_ADC_PollForConversion() to ensure that conversion is completed and HAL_ADC_GetValue() to retrieve conversion result and trig another conversion start. */ + + FunctionalState LowPowerAutoPowerOff; /*!< Select the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling). + This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait'). + This parameter can be set to ENABLE or DISABLE. + Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */ + + FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) or continuous mode for ADC group regular, + after the first ADC conversion start trigger occurred (software start or external trigger). + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t NbrOfConversion; /*!< Specify the number of ranks that will be converted within the regular group sequencer. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Number of ranks in the scan sequence is configurable using this parameter. + Note: After the first call of 'HAL_ADC_Init()', each rank corresponding to parameter "NbrOfConversion" must be set using 'HAL_ADC_ConfigChannel()'. + Afterwards, when all needed sequencer ranks are set, parameter 'NbrOfConversion' can be updated without modifying configuration of sequencer ranks + (sequencer ranks above 'NbrOfConversion' are discarded). + - sequencer configured to not fully configurable: + Number of ranks in the scan sequence is defined by number of channels set in the sequence. This parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. + Note: This parameter must be modified when no conversion is on going on regular group (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion). */ + + FunctionalState DiscontinuousConvMode; /*!< Specify whether the conversions sequence of ADC group regular is performed in Complete-sequence/Discontinuous-sequence + (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. + Note: On this STM32 series, ADC group regular number of discontinuous ranks increment is fixed to one-by-one. */ + + uint32_t ExternalTrigConv; /*!< Select the external event source used to trigger ADC group regular conversion start. + If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger is used instead. + This parameter can be a value of @ref ADC_regular_external_trigger_source. + Caution: external trigger source is common to all ADC instances. */ + + uint32_t ExternalTrigConvEdge; /*!< Select the external event edge used to trigger ADC group regular conversion start. + If trigger source is set to ADC_SOFTWARE_START, this parameter is discarded. + This parameter can be a value of @ref ADC_regular_external_trigger_edge */ + + FunctionalState DMAContinuousRequests; /*!< Specify whether the DMA requests are performed in one shot mode (DMA transfer stops when number of conversions is reached) + or in continuous mode (DMA transfer unlimited, whatever number of conversions). + This parameter can be set to ENABLE or DISABLE. + Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. */ + + uint32_t Overrun; /*!< Select the behavior in case of overrun: data overwritten or preserved (default). + This parameter can be a value of @ref ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR. + Note: In case of overrun set to data preserved and usage with programming model with interruption (HAL_Start_IT()): ADC IRQ handler has to clear + end of conversion flags, this induces the release of the preserved data. If needed, this data can be saved in function + HAL_ADC_ConvCpltCallback(), placed in user program code (called before end of conversion flags clear). + Note: Error reporting with respect to the conversion mode: + - Usage with ADC conversion by polling for event or interruption: Error is reported only if overrun is set to data preserved. If overrun is set to data + overwritten, user can willingly not read all the converted data, this is not considered as an erroneous case. + - Usage with ADC conversion by DMA: Error is reported whatever overrun setting (DMA is expected to process all data from data register). */ + + uint32_t SamplingTimeCommon1; /*!< Set sampling time common to a group of channels. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + uint32_t SamplingTimeCommon2; /*!< Set sampling time common to a group of channels, second common setting possible. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + FunctionalState OversamplingMode; /*!< Specify whether the oversampling feature is enabled or disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter can be modified only if there is no conversion is ongoing on ADC group regular. */ + + ADC_OversamplingTypeDef Oversampling; /*!< Specify the Oversampling parameters. + Caution: this setting overwrites the previous oversampling configuration if oversampling is already enabled. */ + + uint32_t TriggerFrequencyMode; /*!< Set ADC trigger frequency mode. + This parameter can be a value of @ref ADC_HAL_EC_REG_TRIGGER_FREQ. + Note: ADC trigger frequency mode must be set to low frequency when + a duration is exceeded before ADC conversion start trigger event + (between ADC enable and ADC conversion start trigger event + or between two ADC conversion start trigger event). + Duration value: Refer to device datasheet, parameter "tIdle". + Note: When ADC trigger frequency mode is set to low frequency, + some rearm cycles are inserted before performing ADC conversion + start, inducing a delay of 2 ADC clock cycles. */ + +} ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters by function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled or enabled without conversion on going on regular group. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another parameter (which fulfills the ADC state condition) + * on the fly). + */ +typedef struct +{ + uint32_t Channel; /*!< Specify the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL + Note: Depending on devices and ADC instances, some channels may not be available on device package pins. Refer to device datasheet for channels availability. */ + + uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer and specify its conversion rank. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Channels ordering into each rank of scan sequence: + whatever channel can be placed into whatever rank. + - sequencer configured to not fully configurable: + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer. + This parameter can be a value of @ref ADC_HAL_EC_REG_SEQ_RANKS */ + + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_HAL_EC_SAMPLINGTIME_COMMON + Note: On this STM32 family, two different sampling time settings are available (refer to parameters "SamplingTimeCommon1" and "SamplingTimeCommon2"), each channel can use one of these two settings. + + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values. */ + +} ADC_ChannelConfTypeDef; + +/** + * @brief Structure definition of ADC analog watchdog + * @note The setting of these parameters by function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters except 'HighThreshold', 'LowThreshold': ADC disabled or ADC enabled without conversion on going on ADC groups regular. + * - For parameters 'HighThreshold', 'LowThreshold': ADC enabled with conversion on going on regular. + */ +typedef struct +{ + uint32_t WatchdogNumber; /*!< Select which ADC analog watchdog is monitoring the selected channel. + For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels by setting parameter 'WatchdogMode') + For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel) + This parameter can be a value of @ref ADC_HAL_EC_AWD_NUMBER. */ + + uint32_t WatchdogMode; /*!< Configure the ADC analog watchdog mode: single/all/none channels. + For Analog Watchdog 1: Configure the ADC analog watchdog mode: single channel or all channels, ADC group regular. + For Analog Watchdog 2 and 3: Several channels can be monitored by applying successively the AWD init structure. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + + uint32_t Channel; /*!< Select which ADC channel to monitor by analog watchdog. + For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' is configured on single channel (only 1 channel can be monitored). + For Analog Watchdog 2 and 3: Several channels can be monitored. To use this feature, call successively the function HAL_ADC_AnalogWDGConfig() for each channel to be added (or removed with value 'ADC_ANALOGWATCHDOG_NONE'). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL. */ + + FunctionalState ITMode; /*!< Specify whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t HighThreshold; /*!< Configure the ADC analog watchdog High threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number + between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits + the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ + + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog Low threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number + between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits + the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ +} ADC_AnalogWDGConfTypeDef; + +/** @defgroup ADC_States ADC States + * @{ + */ + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + * @note ADC state machine is managed by bitfields, state must be compared + * with bit by bit. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET (0x00000000UL) /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY (0x00000001UL) /*!< ADC peripheral ready for use */ +#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002UL) /*!< ADC is busy due to an internal process (initialization, calibration) */ +#define HAL_ADC_STATE_TIMEOUT (0x00000004UL) /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010UL) /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020UL) /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA (0x00000040UL) /*!< DMA error occurrence */ + +/* States of ADC group regular */ +#define HAL_ADC_STATE_REG_BUSY (0x00000100UL) /*!< A conversion on ADC group regular is ongoing or can occur (either by continuous mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */ +#define HAL_ADC_STATE_REG_EOC (0x00000200UL) /*!< Conversion data available on group regular */ +#define HAL_ADC_STATE_REG_OVR (0x00000400UL) /*!< Overrun occurrence */ +#define HAL_ADC_STATE_REG_EOSMP (0x00000800UL) /*!< Not available on this STM32 series: End Of Sampling flag raised */ + +/* States of ADC group injected */ +#define HAL_ADC_STATE_INJ_BUSY (0x00001000UL) /*!< Not available on this STM32 series: A conversion on group injected is ongoing or can occur (either by auto-injection mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available))*/ +#define HAL_ADC_STATE_INJ_EOC (0x00002000UL) /*!< Not available on this STM32 series: Conversion data available on group injected */ +#define HAL_ADC_STATE_INJ_JQOVF (0x00004000UL) /*!< Not available on this STM32 series: Injected queue overflow occurrence */ + +/* States of ADC analog watchdogs */ +#define HAL_ADC_STATE_AWD1 (0x00010000UL) /*!< Out-of-window occurrence of ADC analog watchdog 1 */ +#define HAL_ADC_STATE_AWD2 (0x00020000UL) /*!< Out-of-window occurrence of ADC analog watchdog 2 */ +#define HAL_ADC_STATE_AWD3 (0x00040000UL) /*!< Out-of-window occurrence of ADC analog watchdog 3 */ + +/* States of ADC multi-mode */ +#define HAL_ADC_STATE_MULTIMODE_SLAVE (0x00100000UL) /*!< Not available on this STM32 series: ADC in multimode slave state, controlled by another ADC master (when feature available) */ + + +/** + * @} + */ + +/** + * @brief ADC handle Structure definition + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +typedef struct __ADC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +{ + ADC_TypeDef *Instance; /*!< Register base address */ + ADC_InitTypeDef Init; /*!< ADC initialization parameters and regular conversions setting */ + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + HAL_LockTypeDef Lock; /*!< ADC locking object */ + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + __IO uint32_t ErrorCode; /*!< ADC Error code */ + + uint32_t ADCGroupRegularSequencerRanks; /*!< ADC group regular sequencer memorization of ranks setting, used in mode "fully configurable" (refer to parameter 'ScanConvMode') */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ + void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ + void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ + void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ + void (* LevelOutOfWindow2Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 2 callback */ + void (* LevelOutOfWindow3Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 3 callback */ + void (* EndOfSamplingCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC end of sampling callback */ + void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ + void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} ADC_HandleTypeDef; + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL ADC Callback ID enumeration definition + */ +typedef enum +{ + HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ + HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ + HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID = 0x06U, /*!< ADC analog watchdog 2 callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID = 0x07U, /*!< ADC analog watchdog 3 callback ID */ + HAL_ADC_END_OF_SAMPLING_CB_ID = 0x08U, /*!< ADC end of sampling callback ID */ + HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ + HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ +} HAL_ADC_CallbackIDTypeDef; + +/** + * @brief HAL ADC Callback pointer definition + */ +typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< ADC peripheral internal error (problem of clocking, + enable/disable, erroneous state, ...) */ +#define HAL_ADC_ERROR_OVR (0x02U) /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define ADC_CLOCK_SYNC_PCLK_DIV1 (LL_ADC_CLOCK_SYNC_PCLK_DIV1) /*!< ADC synchronous clock derived from AHB clock without prescaler. This configuration must be enabled only if PCLK has a 50% duty clock cycle (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle) */ +#define ADC_CLOCK_SYNC_PCLK_DIV2 (LL_ADC_CLOCK_SYNC_PCLK_DIV2) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */ +#define ADC_CLOCK_SYNC_PCLK_DIV4 (LL_ADC_CLOCK_SYNC_PCLK_DIV4) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */ + +#define ADC_CLOCK_ASYNC_DIV1 (LL_ADC_CLOCK_ASYNC_DIV1) /*!< ADC asynchronous clock without prescaler */ +#define ADC_CLOCK_ASYNC_DIV2 (LL_ADC_CLOCK_ASYNC_DIV2) /*!< ADC asynchronous clock with prescaler division by 2 */ +#define ADC_CLOCK_ASYNC_DIV4 (LL_ADC_CLOCK_ASYNC_DIV4) /*!< ADC asynchronous clock with prescaler division by 4 */ +#define ADC_CLOCK_ASYNC_DIV6 (LL_ADC_CLOCK_ASYNC_DIV6) /*!< ADC asynchronous clock with prescaler division by 6 */ +#define ADC_CLOCK_ASYNC_DIV8 (LL_ADC_CLOCK_ASYNC_DIV8) /*!< ADC asynchronous clock with prescaler division by 8 */ +#define ADC_CLOCK_ASYNC_DIV10 (LL_ADC_CLOCK_ASYNC_DIV10) /*!< ADC asynchronous clock with prescaler division by 10 */ +#define ADC_CLOCK_ASYNC_DIV12 (LL_ADC_CLOCK_ASYNC_DIV12) /*!< ADC asynchronous clock with prescaler division by 12 */ +#define ADC_CLOCK_ASYNC_DIV16 (LL_ADC_CLOCK_ASYNC_DIV16) /*!< ADC asynchronous clock with prescaler division by 16 */ +#define ADC_CLOCK_ASYNC_DIV32 (LL_ADC_CLOCK_ASYNC_DIV32) /*!< ADC asynchronous clock with prescaler division by 32 */ +#define ADC_CLOCK_ASYNC_DIV64 (LL_ADC_CLOCK_ASYNC_DIV64) /*!< ADC asynchronous clock with prescaler division by 64 */ +#define ADC_CLOCK_ASYNC_DIV128 (LL_ADC_CLOCK_ASYNC_DIV128) /*!< ADC asynchronous clock with prescaler division by 128 */ +#define ADC_CLOCK_ASYNC_DIV256 (LL_ADC_CLOCK_ASYNC_DIV256) /*!< ADC asynchronous clock with prescaler division by 256 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define ADC_RESOLUTION_12B (LL_ADC_RESOLUTION_12B) /*!< ADC resolution 12 bits */ +#define ADC_RESOLUTION_10B (LL_ADC_RESOLUTION_10B) /*!< ADC resolution 10 bits */ +#define ADC_RESOLUTION_8B (LL_ADC_RESOLUTION_8B) /*!< ADC resolution 8 bits */ +#define ADC_RESOLUTION_6B (LL_ADC_RESOLUTION_6B) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment + * @{ + */ +#define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC sequencer scan mode + * @{ + */ +/* Note: On this STM32 family, ADC group regular sequencer both modes */ +/* "fully configurable" or "not fully configurable" are */ +/* available. */ +/* Scan mode values must be compatible with other STM32 devices having */ +/* a configurable sequencer. */ +/* Scan direction setting values are defined by taking in account */ +/* already defined values for other STM32 devices: */ +/* ADC_SCAN_DISABLE (0x00000000UL) */ +/* ADC_SCAN_ENABLE (0x00000001UL) */ +/* Sequencer fully configurable with only rank 1 enabled is considered */ +/* as default setting equivalent to scan enable. */ +/* In case of migration from another STM32 device, the user will be */ +/* warned of change of setting choices with assert check. */ +#define ADC_SCAN_DISABLE (0x00000000UL) /*!< Sequencer set to fully configurable: only the rank 1 is enabled (no scan sequence on several ranks) */ +#define ADC_SCAN_ENABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer set to fully configurable: sequencer length and each rank affectation to a channel are configurable. */ + +#define ADC_SCAN_SEQ_FIXED (ADC_SCAN_SEQ_FIXED_INT) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction forward: from channel 0 to channel 18 */ +#define ADC_SCAN_SEQ_FIXED_BACKWARD (ADC_SCAN_SEQ_FIXED_INT | ADC_CFGR1_SCANDIR) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction backward: from channel 18 to channel 0 */ + +#define ADC_SCAN_DIRECTION_FORWARD (ADC_SCAN_SEQ_FIXED) /* For compatibility with other STM32 devices */ +#define ADC_SCAN_DIRECTION_BACKWARD (ADC_SCAN_SEQ_FIXED_BACKWARD) /* For compatibility with other STM32 devices */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_source ADC group regular trigger source + * @{ + */ +/* ADC group regular trigger sources for all ADC instances */ +#define ADC_SOFTWARE_START (LL_ADC_REG_TRIG_SOFTWARE) /*!< ADC group regular conversion trigger internal: SW start. */ +#define ADC_EXTERNALTRIG_T1_TRGO2 (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_T1_CC4 (LL_ADC_REG_TRIG_EXT_TIM1_CH4) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#if defined(TIM2) +#define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define ADC_EXTERNALTRIG_T3_TRGO (LL_ADC_REG_TRIG_EXT_TIM3_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#if defined(TIM4) +#define ADC_EXTERNALTRIG_T4_TRGO (LL_ADC_REG_TRIG_EXT_TIM4_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM6) +#define ADC_EXTERNALTRIG_T6_TRGO (LL_ADC_REG_TRIG_EXT_TIM6_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM15) +#define ADC_EXTERNALTRIG_T15_TRGO (LL_ADC_REG_TRIG_EXT_TIM15_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_edge ADC group regular trigger edge (when external trigger is selected) + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE (0x00000000UL) /*!< Regular conversions hardware trigger detection disabled */ +#define ADC_EXTERNALTRIGCONVEDGE_RISING (LL_ADC_REG_TRIG_EXT_RISING) /*!< ADC group regular conversion trigger polarity set to rising edge */ +#define ADC_EXTERNALTRIGCONVEDGE_FALLING (LL_ADC_REG_TRIG_EXT_FALLING) /*!< ADC group regular conversion trigger polarity set to falling edge */ +#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING (LL_ADC_REG_TRIG_EXT_RISINGFALLING) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_EOCSelection ADC sequencer end of unitary conversion or sequence conversions + * @{ + */ +#define ADC_EOC_SINGLE_CONV (ADC_ISR_EOC) /*!< End of unitary conversion flag */ +#define ADC_EOC_SEQ_CONV (ADC_ISR_EOS) /*!< End of sequence conversions flag */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define ADC_OVR_DATA_PRESERVED (LL_ADC_REG_OVR_DATA_PRESERVED) /*!< ADC group regular behavior in case of overrun: data preserved */ +#define ADC_OVR_DATA_OVERWRITTEN (LL_ADC_REG_OVR_DATA_OVERWRITTEN) /*!< ADC group regular behavior in case of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define ADC_RANK_CHANNEL_NUMBER (0x00000001U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Enable the rank of the selected channels. Number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */ +#define ADC_RANK_NONE (0x00000002U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Disable the selected rank (selected channel) from sequencer */ + +#define ADC_REGULAR_RANK_1 (LL_ADC_REG_RANK_1) /*!< ADC group regular sequencer rank 1 */ +#define ADC_REGULAR_RANK_2 (LL_ADC_REG_RANK_2) /*!< ADC group regular sequencer rank 2 */ +#define ADC_REGULAR_RANK_3 (LL_ADC_REG_RANK_3) /*!< ADC group regular sequencer rank 3 */ +#define ADC_REGULAR_RANK_4 (LL_ADC_REG_RANK_4) /*!< ADC group regular sequencer rank 4 */ +#define ADC_REGULAR_RANK_5 (LL_ADC_REG_RANK_5) /*!< ADC group regular sequencer rank 5 */ +#define ADC_REGULAR_RANK_6 (LL_ADC_REG_RANK_6) /*!< ADC group regular sequencer rank 6 */ +#define ADC_REGULAR_RANK_7 (LL_ADC_REG_RANK_7) /*!< ADC group regular sequencer rank 7 */ +#define ADC_REGULAR_RANK_8 (LL_ADC_REG_RANK_8) /*!< ADC group regular sequencer rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define ADC_SAMPLINGTIME_COMMON_1 (LL_ADC_SAMPLINGTIME_COMMON_1) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define ADC_SAMPLINGTIME_COMMON_2 (LL_ADC_SAMPLINGTIME_COMMON_2) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define ADC_SAMPLETIME_1CYCLE_5 (LL_ADC_SAMPLINGTIME_1CYCLE_5) /*!< Sampling time 1.5 ADC clock cycle */ +#define ADC_SAMPLETIME_3CYCLES_5 (LL_ADC_SAMPLINGTIME_3CYCLES_5) /*!< Sampling time 3.5 ADC clock cycles */ +#define ADC_SAMPLETIME_7CYCLES_5 (LL_ADC_SAMPLINGTIME_7CYCLES_5) /*!< Sampling time 7.5 ADC clock cycles */ +#define ADC_SAMPLETIME_12CYCLES_5 (LL_ADC_SAMPLINGTIME_12CYCLES_5) /*!< Sampling time 12.5 ADC clock cycles */ +#define ADC_SAMPLETIME_19CYCLES_5 (LL_ADC_SAMPLINGTIME_19CYCLES_5) /*!< Sampling time 19.5 ADC clock cycles */ +#define ADC_SAMPLETIME_39CYCLES_5 (LL_ADC_SAMPLINGTIME_39CYCLES_5) /*!< Sampling time 39.5 ADC clock cycles */ +#define ADC_SAMPLETIME_79CYCLES_5 (LL_ADC_SAMPLINGTIME_79CYCLES_5) /*!< Sampling time 79.5 ADC clock cycles */ +#define ADC_SAMPLETIME_160CYCLES_5 (LL_ADC_SAMPLINGTIME_160CYCLES_5) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define ADC_CHANNEL_0 (LL_ADC_CHANNEL_0) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ +#define ADC_CHANNEL_1 (LL_ADC_CHANNEL_1) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ +#define ADC_CHANNEL_2 (LL_ADC_CHANNEL_2) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ +#define ADC_CHANNEL_3 (LL_ADC_CHANNEL_3) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */ +#define ADC_CHANNEL_4 (LL_ADC_CHANNEL_4) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */ +#define ADC_CHANNEL_5 (LL_ADC_CHANNEL_5) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */ +#define ADC_CHANNEL_6 (LL_ADC_CHANNEL_6) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */ +#define ADC_CHANNEL_7 (LL_ADC_CHANNEL_7) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */ +#define ADC_CHANNEL_8 (LL_ADC_CHANNEL_8) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */ +#define ADC_CHANNEL_9 (LL_ADC_CHANNEL_9) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */ +#define ADC_CHANNEL_10 (LL_ADC_CHANNEL_10) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */ +#define ADC_CHANNEL_11 (LL_ADC_CHANNEL_11) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */ +#define ADC_CHANNEL_12 (LL_ADC_CHANNEL_12) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */ +#define ADC_CHANNEL_13 (LL_ADC_CHANNEL_13) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */ +#define ADC_CHANNEL_14 (LL_ADC_CHANNEL_14) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */ +#define ADC_CHANNEL_15 (LL_ADC_CHANNEL_15) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ +#define ADC_CHANNEL_16 (LL_ADC_CHANNEL_16) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ +#define ADC_CHANNEL_17 (LL_ADC_CHANNEL_17) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ +#define ADC_CHANNEL_18 (LL_ADC_CHANNEL_18) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ +#define ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_VREFINT) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ +#define ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_TEMPSENSOR) /*!< ADC internal channel connected to Temperature sensor. */ +#define ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_VBAT) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define ADC_ANALOGWATCHDOG_1 (LL_ADC_AWD1) /*!< ADC analog watchdog number 1 */ +#define ADC_ANALOGWATCHDOG_2 (LL_ADC_AWD2) /*!< ADC analog watchdog number 2 */ +#define ADC_ANALOGWATCHDOG_3 (LL_ADC_AWD3) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC Analog Watchdog Mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE (0x00000000UL) /*!< No analog watchdog selected */ +#define ADC_ANALOGWATCHDOG_SINGLE_REG (ADC_CFGR1_AWD1SGL | ADC_CFGR1_AWD1EN) /*!< Analog watchdog applied to a regular group single channel */ +#define ADC_ANALOGWATCHDOG_ALL_REG (ADC_CFGR1_AWD1EN) /*!< Analog watchdog applied to regular group all channels */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define ADC_OVERSAMPLING_RATIO_2 (LL_ADC_OVS_RATIO_2) /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_4 (LL_ADC_OVS_RATIO_4) /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_8 (LL_ADC_OVS_RATIO_8) /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_16 (LL_ADC_OVS_RATIO_16) /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_32 (LL_ADC_OVS_RATIO_32) /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_64 (LL_ADC_OVS_RATIO_64) /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_128 (LL_ADC_OVS_RATIO_128) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_256 (LL_ADC_OVS_RATIO_256) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +#define ADC_RIGHTBITSHIFT_NONE (LL_ADC_OVS_SHIFT_NONE) /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_1 (LL_ADC_OVS_SHIFT_RIGHT_1) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_2 (LL_ADC_OVS_SHIFT_RIGHT_2) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_3 (LL_ADC_OVS_SHIFT_RIGHT_3) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_4 (LL_ADC_OVS_SHIFT_RIGHT_4) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_5 (LL_ADC_OVS_SHIFT_RIGHT_5) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_6 (LL_ADC_OVS_SHIFT_RIGHT_6) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_7 (LL_ADC_OVS_SHIFT_RIGHT_7) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_8 (LL_ADC_OVS_SHIFT_RIGHT_8) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define ADC_TRIGGEREDMODE_SINGLE_TRIGGER (LL_ADC_OVS_REG_CONT) /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */ +#define ADC_TRIGGEREDMODE_MULTI_TRIGGER (LL_ADC_OVS_REG_DISCONT) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define ADC_TRIGGER_FREQ_HIGH (LL_ADC_TRIGGER_FREQ_HIGH) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define ADC_TRIGGER_FREQ_LOW (LL_ADC_TRIGGER_FREQ_LOW) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +#define ADC_EOSMP_EVENT (ADC_FLAG_EOSMP) /*!< ADC End of Sampling event */ +#define ADC_AWD1_EVENT (ADC_FLAG_AWD1) /*!< ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 series) */ +#define ADC_AWD2_EVENT (ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 series) */ +#define ADC_AWD3_EVENT (ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 series) */ +#define ADC_OVR_EVENT (ADC_FLAG_OVR) /*!< ADC overrun event */ +/** + * @} + */ +#define ADC_AWD_EVENT ADC_AWD1_EVENT /*!< ADC Analog watchdog 1 event: Naming for compatibility with other STM32 devices having only one analog watchdog */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */ +#define ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC channel configuration ready interrupt source */ +#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of sampling interrupt source */ +#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of regular conversion interrupt source */ +#define ADC_IT_EOS ADC_IER_EOSIE /*!< ADC End of regular sequence of conversions interrupt source */ +#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ +#define ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog) */ +#define ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC Analog watchdog 2 interrupt source (additional analog watchdog) */ +#define ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC Analog watchdog 3 interrupt source (additional analog watchdog) */ +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */ +#define ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC channel configuration ready flag */ +#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */ +#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ +#define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ +#define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag */ +#define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag */ +#define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Test if conversion trigger of regular group is software start + * or external trigger. + * @param __HANDLE__ ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ + (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == 0UL) + +/** + * @brief Return resolution bits in CFGR1 register RES[1:0] field. + * @param __HANDLE__ ADC handle + * @retval Value of bitfield RES in CFGR1 register. + */ +#define ADC_GET_RESOLUTION(__HANDLE__) \ + (LL_ADC_GetResolution((__HANDLE__)->Instance)) + +/** + * @brief Clear ADC error code (set it to no error code "HAL_ADC_ERROR_NONE"). + * @param __HANDLE__ ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Simultaneously clear and set specific bits of the handle State. + * @note ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Enable ADC discontinuous conversion mode for regular group + * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode. + * @retval None + */ +#define ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) \ + ((_REG_DISCONTINUOUS_MODE_) << 16U) + +/** + * @brief Enable the ADC auto off mode. + * @param _AUTOOFF_ Auto off bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOOFF(_AUTOOFF_) \ + ((_AUTOOFF_) << 15U) + +/** + * @brief Enable the ADC auto delay mode. + * @param _AUTOWAIT_ Auto delay bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) \ + ((_AUTOWAIT_) << 14U) + +/** + * @brief Enable ADC continuous conversion mode. + * @param _CONTINUOUS_MODE_ Continuous mode. + * @retval None + */ +#define ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) \ + ((_CONTINUOUS_MODE_) << 13U) + +/** + * @brief Enable ADC overrun mode. + * @param _OVERRUN_MODE_ Overrun mode. + * @retval Overrun bit setting to be programmed into CFGR register + */ +/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */ +/* "ADC_OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it */ +/* as the default case to be compliant with other STM32 devices. */ +#define ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \ + ( ( (_OVERRUN_MODE_) != (ADC_OVR_DATA_PRESERVED) \ + )? (ADC_CFGR1_OVRMOD) : (0x00000000UL) \ + ) + +/** + * @brief Set ADC scan mode with differentiation of sequencer setting + * fixed or configurable + * @param _SCAN_MODE_ Scan conversion mode. + * @retval None + */ +/* Note: Scan mode set using this macro (instead of parameter direct set) */ +/* due to different modes on other STM32 devices: */ +/* if scan mode is disabled, sequencer is set to fully configurable */ +/* with setting of only rank 1 enabled afterwards. */ +#define ADC_SCAN_SEQ_MODE(_SCAN_MODE_) \ + ( (((_SCAN_MODE_) & ADC_SCAN_SEQ_FIXED_INT) != 0UL \ + )? \ + ((_SCAN_MODE_) & (~ADC_SCAN_SEQ_FIXED_INT)) \ + : \ + (ADC_CFGR1_CHSELRMOD) \ + ) + +/** + * @brief Enable the ADC DMA continuous request. + * @param _DMACONTREQ_MODE_: DMA continuous request mode. + * @retval None + */ +#define ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) \ + ((_DMACONTREQ_MODE_) << 1U) + +/** + * @brief Shift the AWD threshold in function of the selected ADC resolution. + * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)) + * @param __HANDLE__ ADC handle + * @param _Threshold_ Value to be shifted + * @retval None + */ +#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \ + ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3U)*2U)) + +#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV1) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV1 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV2 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV4 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV6 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV8 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV10 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV12 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV16 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV32 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV64 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV128 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV256)) + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ + ((RESOLUTION) == ADC_RESOLUTION_10B) || \ + ((RESOLUTION) == ADC_RESOLUTION_8B) || \ + ((RESOLUTION) == ADC_RESOLUTION_6B) ) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ + ((ALIGN) == ADC_DATAALIGN_LEFT) ) + +#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \ + ((SCAN_MODE) == ADC_SCAN_ENABLE) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED_BACKWARD) ) + +#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) + +#if defined(TIM15) && defined(TIM6) && defined(TIM2) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T6_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T15_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#elif defined(TIM15) && defined(TIM6) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T6_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T15_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#elif defined(TIM2) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#else +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#endif + +#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \ + ((EOC_SELECTION) == ADC_EOC_SEQ_CONV)) + +#define IS_ADC_OVERRUN(OVR) (((OVR) == ADC_OVR_DATA_PRESERVED) || \ + ((OVR) == ADC_OVR_DATA_OVERWRITTEN) ) + +#define IS_ADC_REGULAR_RANK_SEQ_FIXED(RANK) (((RANK) == ADC_RANK_CHANNEL_NUMBER) || \ + ((RANK) == ADC_RANK_NONE) ) + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) == ADC_REGULAR_RANK_1 ) || \ + ((RANK) == ADC_REGULAR_RANK_2 ) || \ + ((RANK) == ADC_REGULAR_RANK_3 ) || \ + ((RANK) == ADC_REGULAR_RANK_4 ) || \ + ((RANK) == ADC_REGULAR_RANK_5 ) || \ + ((RANK) == ADC_REGULAR_RANK_6 ) || \ + ((RANK) == ADC_REGULAR_RANK_7 ) || \ + ((RANK) == ADC_REGULAR_RANK_8 ) ) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_16) || \ + ((CHANNEL) == ADC_CHANNEL_17) || \ + ((CHANNEL) == ADC_CHANNEL_18) || \ + ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \ + ((CHANNEL) == ADC_CHANNEL_VREFINT) || \ + ((CHANNEL) == ADC_CHANNEL_VBAT) ) + +#define IS_ADC_SAMPLING_TIME_COMMON(SAMPLING_TIME_COMMON) (((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_1) || \ + ((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_2) ) + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \ + ((TIME) == ADC_SAMPLETIME_3CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_12CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_19CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_39CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_79CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_160CYCLES_5) ) + +#define IS_ADC_ANALOG_WATCHDOG_NUMBER(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_1) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_2) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_3) ) + +#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) ) + +#define IS_ADC_TRIGGER_FREQ(TRIGGER_FREQ) (((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_HIGH) || \ + ((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_LOW) ) + +#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_EOSMP_EVENT) || \ + ((EVENT) == ADC_AWD1_EVENT) || \ + ((EVENT) == ADC_AWD2_EVENT) || \ + ((EVENT) == ADC_AWD3_EVENT) || \ + ((EVENT) == ADC_OVR_EVENT) ) + +/** + * @brief Verify that a given value is aligned with the ADC resolution range. + * @param __RESOLUTION__ ADC resolution (12, 10, 8 or 6 bits). + * @param __ADC_VALUE__ value checked against the resolution. + * @retval SET (__ADC_VALUE__ in line with __RESOLUTION__) or RESET (__ADC_VALUE__ not in line with __RESOLUTION__) + */ +#define IS_ADC_RANGE(__RESOLUTION__, __ADC_VALUE__) \ + ((__ADC_VALUE__) <= __LL_ADC_DIGITAL_SCALE(__RESOLUTION__)) + +/** @defgroup ADC_regular_nb_conv_verification ADC Regular Conversion Number Verification + * @{ + */ +#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= 1UL) && ((LENGTH) <= 8UL)) +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */ +#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC) + +#define ADC_SCAN_SEQ_FIXED_INT 0x80000000U /* Internal definition to differentiate sequencer setting fixed or configurable */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** @defgroup ADC_HAL_EM_HANDLE_IT_FLAG HAL ADC macro to manage HAL ADC handle, IT and flags. + * @{ + */ + +/** @brief Reset ADC handle state. + * @param __HANDLE__ ADC handle + * @retval None + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @brief Enable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) + +/** + * @brief Disable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC interrupt source to check + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval State of interruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Check whether the specified ADC flag is set or not. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval State of flag (TRUE or FALSE). + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified ADC flag. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval None + */ +/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (((__HANDLE__)->Instance->ISR) = (__FLAG__)) + +/** + * @} + */ + +/** @defgroup ADC_HAL_EM_HELPER_MACRO HAL ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals ADC_CHANNEL_x. + * @note Example: + * __HAL_ADC_CHANNEL_TO_DECIMAL_NB(ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __HAL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + __LL_ADC_CHANNEL_TO_DECIMAL_NB((__CHANNEL__)) + +/** + * @brief Helper macro to get ADC channel in literal format ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __HAL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __HAL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + __LL_ADC_DECIMAL_NB_TO_CHANNEL((__DECIMAL_NB__)) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * ADC_CHANNEL_1, ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (ADC_CHANNEL_1, ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + */ +#define __HAL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE((__ADC_INSTANCE__), (__CHANNEL__)) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __HAL_ADC_COMMON_INSTANCE(__ADCx__) \ + __LL_ADC_COMMON_INSTANCE((__ADCx__)) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __HAL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE((__ADCXY_COMMON__)) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value + */ +#define __HAL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + __LL_ADC_DIGITAL_SCALE((__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __HAL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +__LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__),\ + (__ADC_RESOLUTION_CURRENT__),\ + (__ADC_RESOLUTION_TARGET__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__),\ + (__ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __HAL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_VREFANALOG_VOLTAGE((__VREFINT_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE((__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32G0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32G0, refer to device datasheet parameter "V30" (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_TYP_AVGSLOPE__),\ + (__TEMPSENSOR_TYP_CALX_V__),\ + (__TEMPSENSOR_CALX_TEMP__),\ + (__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include ADC HAL Extended module */ +#include "stm32g0xx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc); + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig); + +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h new file mode 100644 index 0000000..7df2395 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h @@ -0,0 +1,189 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc_ex.h + * @author MCD Application Team + * @brief Header file of ADC HAL extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_ADC_EX_H +#define STM32G0xx_HAL_ADC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADC Extended Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants + * @{ + */ + +/** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on all STM32 devices) */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Check whether or not ADC is independent. + * @param __HANDLE__ ADC handle. + * @note When multimode feature is not available, the macro always returns SET. + * @retval SET (ADC is independent) or RESET (ADC is not). + */ +#define ADC_IS_INDEPENDENT(__HANDLE__) (SET) + + +/** + * @brief Calibration factor size verification (7 bits maximum). + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large) + */ +#define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU)) + +/** + * @brief Verify the ADC oversampling ratio. + * @param __RATIO__ programmed ADC oversampling ratio. + * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid) + */ +#define IS_ADC_OVERSAMPLING_RATIO(__RATIO__) (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) + +/** + * @brief Verify the ADC oversampling shift. + * @param __SHIFT__ programmed ADC oversampling shift. + * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid) + */ +#define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__) (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_1 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_2 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_3 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_4 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_5 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_6 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_7 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_8 )) + +/** + * @brief Verify the ADC oversampling triggered mode. + * @param __MODE__ programmed ADC oversampling triggered mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ + ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ + +/* ADC calibration */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_ADC_EX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cec.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cec.h new file mode 100644 index 0000000..3931e09 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cec.h @@ -0,0 +1,794 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cec.h + * @author MCD Application Team + * @brief Header file of CEC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CEC_H +#define STM32G0xx_HAL_CEC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined (CEC) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CEC_Exported_Types CEC Exported Types + * @{ + */ + +/** + * @brief CEC Init Structure definition + */ +typedef struct +{ + uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time. + It can be one of @ref CEC_Signal_Free_Time + and belongs to the set {0,...,7} where + 0x0 is the default configuration + else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */ + + uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms, + it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE + or CEC_EXTENDED_TOLERANCE */ + + uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception. + CEC_NO_RX_STOP_ON_BRE: reception is not stopped. + CEC_RX_STOP_ON_BRE: reception is stopped. */ + + uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the + CEC line upon Bit Rising Error detection. + CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation. + CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */ + + uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the + CEC line upon Long Bit Period Error detection. + CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation. + CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */ + + uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line + upon an error detected on a broadcast message. + + It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values: + + 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION. + a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE + and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION. + b) LBPE detection: error-bit generation on the CEC line + if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION. + + 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION. + no error-bit generation in case neither a) nor b) are satisfied. Additionally, + there is no error-bit generation in case of Short Bit Period Error detection in + a broadcast message while LSTN bit is set. */ + + uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts. + CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software. + CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */ + + uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values: + + CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its + own address (OAR). Messages addressed to different destination are ignored. + Broadcast messages are always received. + + CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own + address (OAR) with positive acknowledge. Messages addressed to different destination + are received, but without interfering with the CEC bus: no acknowledge sent. */ + + uint16_t OwnAddress; /*!< Own addresses configuration + This parameter can be a value of @ref CEC_OWN_ADDRESS */ + + uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */ + + +} CEC_InitTypeDef; + +/** + * @brief HAL CEC State definition + * @note HAL CEC State value is a combination of 2 different substates: gState and RxState (see @ref CEC_State_Definition). + * - gState contains CEC state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7 (not used) + * x : Should be set to 0 + * b6 Error information + * 0 : No Error + * 1 : Error + * b5 CEC peripheral initialization status + * 0 : Reset (peripheral not initialized) + * 1 : Init done (peripheral initialized. HAL CEC Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 CEC peripheral initialization status + * 0 : Reset (peripheral not initialized) + * 1 : Init done (peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_CEC_StateTypeDef; + +/** + * @brief CEC handle Structure definition + */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +typedef struct __CEC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +{ + CEC_TypeDef *Instance; /*!< CEC registers base address */ + + CEC_InitTypeDef Init; /*!< CEC communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ + + uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ + + uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_CEC_StateTypeDef */ + + HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. + This parameter can be a value of @ref HAL_CEC_StateTypeDef */ + + uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register + in case error is reported */ + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback)(struct __CEC_HandleTypeDef + *hcec); /*!< CEC Tx Transfer completed callback */ + void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec, + uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */ + void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback */ + + void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp Init callback */ + void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp DeInit callback */ + +#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */ +} CEC_HandleTypeDef; + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL CEC Callback ID enumeration definition + */ +typedef enum +{ + HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */ + HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */ + HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */ + HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */ + HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */ +} HAL_CEC_CallbackIDTypeDef; + +/** + * @brief HAL CEC Callback pointer definition + */ +typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec); /*!< pointer to an CEC callback function */ +typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec, + uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */ +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CEC_Exported_Constants CEC Exported Constants + * @{ + */ +/** @defgroup CEC_State_Definition CEC State Code Definition + * @{ + */ +#define HAL_CEC_STATE_RESET ((uint32_t)0x00000000) /*!< Peripheral is not yet Initialized + Value is allowed for gState and RxState */ +#define HAL_CEC_STATE_READY ((uint32_t)0x00000020) /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_CEC_STATE_BUSY ((uint32_t)0x00000024) /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_CEC_STATE_BUSY_RX ((uint32_t)0x00000022) /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_CEC_STATE_BUSY_TX ((uint32_t)0x00000021) /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023) /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_CEC_STATE_ERROR ((uint32_t)0x00000050) /*!< Error Value is allowed for gState only */ +/** + * @} + */ +/** @defgroup CEC_Error_Code CEC Error Code + * @{ + */ +#define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /*!< no error */ +#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */ +#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */ +#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */ +#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */ +#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */ +#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */ +#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */ +#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */ +#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /*!< Invalid Callback Error */ +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter + * @{ + */ +#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U) +#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U) +#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U) +#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U) +#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U) +#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U) +#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U) +#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U) +/** + * @} + */ + +/** @defgroup CEC_Tolerance CEC Receiver Tolerance + * @{ + */ +#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U) +#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) +/** + * @} + */ + +/** @defgroup CEC_BRERxStop CEC Reception Stop on Error + * @{ + */ +#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U) +#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) +/** + * @} + */ + +/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported + * @{ + */ +#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) +#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) +/** + * @} + */ + +/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported + * @{ + */ +#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) +#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) +/** + * @} + */ + +/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message + * @{ + */ +#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U) +#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) +/** + * @} + */ + +/** @defgroup CEC_SFT_Option CEC Signal Free Time start option + * @{ + */ +#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U) +#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) +/** + * @} + */ + +/** @defgroup CEC_Listening_Mode CEC Listening mode option + * @{ + */ +#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U) +#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) +/** + * @} + */ + +/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register + * @{ + */ +#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U) +/** + * @} + */ + +/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header + * @{ + */ +#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U) +/** + * @} + */ + +/** @defgroup CEC_OWN_ADDRESS CEC Own Address + * @{ + */ +#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */ +#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */ +#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */ +#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */ +#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */ +#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */ +#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */ +#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */ +#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */ +#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */ +#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */ +#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */ +#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */ +#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */ +#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */ +#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */ +/** + * @} + */ + +/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition + * @{ + */ +#define CEC_IT_TXACKE CEC_IER_TXACKEIE +#define CEC_IT_TXERR CEC_IER_TXERRIE +#define CEC_IT_TXUDR CEC_IER_TXUDRIE +#define CEC_IT_TXEND CEC_IER_TXENDIE +#define CEC_IT_TXBR CEC_IER_TXBRIE +#define CEC_IT_ARBLST CEC_IER_ARBLSTIE +#define CEC_IT_RXACKE CEC_IER_RXACKEIE +#define CEC_IT_LBPE CEC_IER_LBPEIE +#define CEC_IT_SBPE CEC_IER_SBPEIE +#define CEC_IT_BRE CEC_IER_BREIE +#define CEC_IT_RXOVR CEC_IER_RXOVRIE +#define CEC_IT_RXEND CEC_IER_RXENDIE +#define CEC_IT_RXBR CEC_IER_RXBRIE +/** + * @} + */ + +/** @defgroup CEC_Flags_Definitions CEC Flags definition + * @{ + */ +#define CEC_FLAG_TXACKE CEC_ISR_TXACKE +#define CEC_FLAG_TXERR CEC_ISR_TXERR +#define CEC_FLAG_TXUDR CEC_ISR_TXUDR +#define CEC_FLAG_TXEND CEC_ISR_TXEND +#define CEC_FLAG_TXBR CEC_ISR_TXBR +#define CEC_FLAG_ARBLST CEC_ISR_ARBLST +#define CEC_FLAG_RXACKE CEC_ISR_RXACKE +#define CEC_FLAG_LBPE CEC_ISR_LBPE +#define CEC_FLAG_SBPE CEC_ISR_SBPE +#define CEC_FLAG_BRE CEC_ISR_BRE +#define CEC_FLAG_RXOVR CEC_ISR_RXOVR +#define CEC_FLAG_RXEND CEC_ISR_RXEND +#define CEC_FLAG_RXBR CEC_ISR_RXBR +/** + * @} + */ + +/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags + * @{ + */ +#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\ + CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) +/** + * @} + */ + +/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag + * @{ + */ +#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) +/** + * @} + */ + +/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag + * @{ + */ +#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CEC_Exported_Macros CEC Exported Macros + * @{ + */ + +/** @brief Reset CEC handle gstate & RxState + * @param __HANDLE__ CEC handle. + * @retval None + */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** @brief Checks whether or not the specified CEC interrupt flag is set. + * @param __HANDLE__ specifies the CEC Handle. + * @param __FLAG__ specifies the flag to check. + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error. + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request. + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rising Error + * @arg CEC_FLAG_RXOVR: Rx Overrun. + * @arg CEC_FLAG_RXEND: End Of Reception. + * @arg CEC_FLAG_RXBR: Rx-Byte Received. + * @retval ITStatus + */ +#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) + +/** @brief Clears the interrupt or status flag when raised (write at 1) + * @param __HANDLE__ specifies the CEC Handle. + * @param __FLAG__ specifies the interrupt/status flag to clear. + * This parameter can be one of the following values: + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error. + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request. + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rising Error + * @arg CEC_FLAG_RXOVR: Rx Overrun. + * @arg CEC_FLAG_RXEND: End Of Reception. + * @arg CEC_FLAG_RXBR: Rx-Byte Received. + * @retval none + */ +#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__)) + +/** @brief Enables the specified CEC interrupt. + * @param __HANDLE__ specifies the CEC Handle. + * @param __INTERRUPT__ specifies the CEC interrupt to enable. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval none + */ +#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** @brief Disables the specified CEC interrupt. + * @param __HANDLE__ specifies the CEC Handle. + * @param __INTERRUPT__ specifies the CEC interrupt to disable. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval none + */ +#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) + +/** @brief Checks whether or not the specified CEC interrupt is enabled. + * @param __HANDLE__ specifies the CEC Handle. + * @param __INTERRUPT__ specifies the CEC interrupt to check. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval FlagStatus + */ +#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) + +/** @brief Enables the CEC device + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN) + +/** @brief Disables the CEC device + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN) + +/** @brief Set Transmission Start flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM) + +/** @brief Set Transmission End flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. + */ +#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM) + +/** @brief Get Transmission Start flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM) + +/** @brief Get Transmission End flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM) + +/** @brief Clear OAR register + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR) + +/** @brief Set OAR register (without resetting previously set address in case of multi-address mode) + * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand + * @param __HANDLE__ specifies the CEC Handle. + * @param __ADDRESS__ Own Address value (CEC logical address is identified by bit position) + * @retval none + */ +#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CEC_Exported_Functions + * @{ + */ + +/** @addtogroup CEC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); +void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); +void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, + pCEC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup CEC_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, + uint8_t *pData, uint32_t Size); +uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec); +void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer); +void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); +void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); +void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); +void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** @addtogroup CEC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec); +uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup CEC_Private_Types CEC Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Variables CEC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Constants CEC Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CEC_Private_Macros CEC Private Macros + * @{ + */ + +#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT) + +#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \ + ((__RXTOL__) == CEC_EXTENDED_TOLERANCE)) + +#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \ + ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE)) + +#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION)) + +#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION)) + +#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION)) + +#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \ + ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END)) + +#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \ + ((__MODE__) == CEC_FULL_LISTENING_MODE)) + +/** @brief Check CEC message size. + * The message size is the payload size: without counting the header, + * it varies from 0 byte (ping operation, one header only, no payload) to + * 15 bytes (1 opcode and up to 14 operands following the header). + * @param __SIZE__ CEC message size. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U) + +/** @brief Check CEC device Own Address Register (OAR) setting. + * OAR address is written in a 15-bit field within CEC_CFGR register. + * @param __ADDRESS__ CEC own address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU) + +/** @brief Check CEC initiator or destination logical address setting. + * Initiator and destination addresses are coded over 4 bits. + * @param __ADDRESS__ CEC initiator or logical address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU) +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Functions CEC Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* CEC */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xxHAL_CEC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_comp.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_comp.h new file mode 100644 index 0000000..e42dfc7 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_comp.h @@ -0,0 +1,884 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_comp.h + * @author MCD Application Team + * @brief Header file of COMP HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_COMP_H +#define STM32G0xx_HAL_COMP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_exti.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ +#if defined (COMP1) || defined (COMP2) + +/** @addtogroup COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup COMP_Exported_Types COMP Exported Types + * @{ + */ + +/** + * @brief COMP Init structure definition + */ +typedef struct +{ + + uint32_t WindowMode; /*!< Set window mode of a pair of comparators instances + (2 consecutive instances odd and even COMP and COMP). + Note: HAL COMP driver allows to set window mode from any COMP instance of the pair of COMP instances composing window mode, except for window mode with COMP2 and COMP3 (for devices featuring COMP3): it must be set from COMP3 instance. + This parameter can be a value of @ref COMP_WindowMode */ + + uint32_t WindowOutput; /*!< Set window mode output. + This parameter can be a value of @ref COMP_WindowOutput */ + + uint32_t Mode; /*!< Set comparator operating mode to adjust power and speed. + Note: For the characteristics of comparator power modes + (propagation delay and power consumption), refer to device datasheet. + This parameter can be a value of @ref COMP_PowerMode */ + + uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input). + This parameter can be a value of @ref COMP_InputPlus */ + + uint32_t InputMinus; /*!< Set comparator input minus (inverting input). + This parameter can be a value of @ref COMP_InputMinus */ + + uint32_t Hysteresis; /*!< Set comparator hysteresis mode of the input minus. + This parameter can be a value of @ref COMP_Hysteresis */ + + uint32_t OutputPol; /*!< Set comparator output polarity. + This parameter can be a value of @ref COMP_OutputPolarity */ + + uint32_t BlankingSrce; /*!< Set comparator blanking source. + This parameter can be a value of @ref COMP_BlankingSrce */ + + uint32_t TriggerMode; /*!< Set the comparator output triggering External Interrupt Line (EXTI). + This parameter can be a value of @ref COMP_EXTI_TriggerMode */ + +} COMP_InitTypeDef; + +/** + * @brief HAL COMP state machine: HAL COMP states definition + */ +#define COMP_STATE_BITFIELD_LOCK (0x10U) +typedef enum +{ + HAL_COMP_STATE_RESET = 0x00U, /*!< COMP not yet initialized */ + HAL_COMP_STATE_RESET_LOCKED = (HAL_COMP_STATE_RESET | COMP_STATE_BITFIELD_LOCK), /*!< COMP not yet initialized and configuration is locked */ + HAL_COMP_STATE_READY = 0x01U, /*!< COMP initialized and ready for use */ + HAL_COMP_STATE_READY_LOCKED = (HAL_COMP_STATE_READY | COMP_STATE_BITFIELD_LOCK), /*!< COMP initialized but configuration is locked */ + HAL_COMP_STATE_BUSY = 0x02U, /*!< COMP is running */ + HAL_COMP_STATE_BUSY_LOCKED = (HAL_COMP_STATE_BUSY | COMP_STATE_BITFIELD_LOCK) /*!< COMP is running and configuration is locked */ +} HAL_COMP_StateTypeDef; + +/** + * @brief COMP Handle Structure definition + */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +typedef struct __COMP_HandleTypeDef +#else +typedef struct +#endif +{ + COMP_TypeDef *Instance; /*!< Register base address */ + COMP_InitTypeDef Init; /*!< COMP required parameters */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ + __IO uint32_t ErrorCode; /*!< COMP error code */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + void (* TriggerCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP trigger callback */ + void (* MspInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp Init callback */ + void (* MspDeInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp DeInit callback */ +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ +} COMP_HandleTypeDef; + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +/** + * @brief HAL COMP Callback ID enumeration definition + */ +typedef enum +{ + HAL_COMP_TRIGGER_CB_ID = 0x00U, /*!< COMP trigger callback ID */ + HAL_COMP_MSPINIT_CB_ID = 0x01U, /*!< COMP Msp Init callback ID */ + HAL_COMP_MSPDEINIT_CB_ID = 0x02U /*!< COMP Msp DeInit callback ID */ +} HAL_COMP_CallbackIDTypeDef; + +/** + * @brief HAL COMP Callback pointer definition + */ +typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer to a COMP callback function */ + +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_Error_Code COMP Error Code + * @{ + */ +#define HAL_COMP_ERROR_NONE (0x00UL) /*!< No error */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +#define HAL_COMP_ERROR_INVALID_CALLBACK (0x01UL) /*!< Invalid Callback error */ +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup COMP_WindowMode COMP Window Mode + * @{ + */ +#define COMP_WINDOWMODE_DISABLE (0x00000000UL) /*!< Window mode disable: Comparators instances pair COMP1 and COMP2 are independent */ +#define COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */ +#define COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON (COMP_CSR_WINMODE | COMP_WINDOWMODE_COMP2) /*!< Window mode enable: if used from COMP1 or COMP2 instance, comparators instances pair COMP1 and COMP2 have their input plus connected together, the common input is COMP2 input plus (COMP1 input plus is no more accessible). If used from COMP3 instance (when available), comparators instances pair COMP2 and COMP3 have their input plus connected together, the common input is COMP2 input plus (COMP3 input plus is no more accessible). */ +/** + * @} + */ + +/** @defgroup COMP_WindowOutput COMP Window output + * @{ + */ +#define COMP_WINDOWOUTPUT_EACH_COMP (0x00000000UL) /*!< Window output default mode: Comparators output are indicating each their own state. To know window mode state: each comparator output must be read, if "((COMPx exclusive or COMPy) == 1)" then monitored signal is within comparators window. */ +#define COMP_WINDOWOUTPUT_COMP1 (COMP_CSR_WINOUT) /*!< Window output synthetized on COMP1 output: COMP1 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */ +#define COMP_WINDOWOUTPUT_COMP2 (COMP_CSR_WINOUT | COMP_WINDOWMODE_COMP2) /*!< Window output synthetized on COMP2 output: COMP2 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */ +#if defined(COMP3) +#define COMP_WINDOWOUTPUT_COMP3 (COMP_CSR_WINOUT) /*!< Window output synthetized on COMP3 output: COMP3 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */ +#endif +#define COMP_WINDOWOUTPUT_BOTH (0x00000001UL) /*!< Window output synthetized on both comparators output of pair of comparator selected (COMP1 and COMP2, or COMP2 and COMP3 for devices featuring COMP3 instance): both comparators outputs are no more indicating their own state, but global window mode state (logical high means monitored signal is within comparators window). This is a specific configuration (technically possible but not relevant from application point of view: 2 comparators output used for the same signal level), standard configuration for window mode is one of the settings above. */ +/** + * @} + */ + +/** @defgroup COMP_PowerMode COMP power mode + * @{ + */ +/* Note: For the characteristics of comparator power modes */ +/* (propagation delay and power consumption), */ +/* refer to device datasheet. */ +#define COMP_POWERMODE_HIGHSPEED (0x00000000UL) /*!< High Speed */ +#define COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< Medium Speed */ +/** + * @} + */ + +/** @defgroup COMP_InputPlus COMP input plus (non-inverting input) + * @{ + */ +#define COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1, pin PB4 for COMP2, pin PB0 for COMP3 (for devices featuring COMP3 instance)) */ +#define COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2, pin PC1 for COMP3 (for devices featuring COMP3 instance)) */ +#define COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2, pin PE7 for COMP3 (for devices featuring COMP3 instance)) */ +/** + * @} + */ + +/** @defgroup COMP_InputMinus COMP input minus (inverting input) + * @{ + */ +#define COMP_INPUT_MINUS_1_4VREFINT (0x00000000UL) /*!< Comparator input minus connected to 1/4 VrefInt */ +#define COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to 1/2 VrefInt */ +#define COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to 3/4 VrefInt */ +#define COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to VrefInt */ +#define COMP_INPUT_MINUS_DAC1_CH1 ( COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) */ +#define COMP_INPUT_MINUS_DAC1_CH2 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */ +#define COMP_INPUT_MINUS_IO1 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2, pin PB2 for COMP3 (for devices featuring COMP3 instance)) */ +#define COMP_INPUT_MINUS_IO2 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1, pin PB7 for COMP2, pin PC0 for COMP3 (for devices featuring COMP3 instance)) */ +#define COMP_INPUT_MINUS_IO3 (COMP_CSR_INMSEL_3 ) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2, pin PE8 for COMP3 (for devices featuring COMP3 instance)) */ +/** + * @} + */ + +/** @defgroup COMP_Hysteresis COMP hysteresis + * @{ + */ +#define COMP_HYSTERESIS_NONE (0x00000000UL) /*!< No hysteresis */ +#define COMP_HYSTERESIS_LOW ( COMP_CSR_HYST_0) /*!< Hysteresis level low */ +#define COMP_HYSTERESIS_MEDIUM (COMP_CSR_HYST_1 ) /*!< Hysteresis level medium */ +#define COMP_HYSTERESIS_HIGH (COMP_CSR_HYST_1 | COMP_CSR_HYST_0) /*!< Hysteresis level high */ +/** + * @} + */ + +/** @defgroup COMP_OutputPolarity COMP output Polarity + * @{ + */ +#define COMP_OUTPUTPOL_NONINVERTED (0x00000000UL) /*!< COMP output level is not inverted (comparator output is high when the input plus is at a higher voltage than the input minus) */ +#define COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output level is inverted (comparator output is low when the input plus is at a higher voltage than the input minus) */ +/** + * @} + */ + +/** @defgroup COMP_BlankingSrce COMP blanking source + * @{ + */ +#define COMP_BLANKINGSRC_NONE (0x00000000UL) /*!State = HAL_COMP_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) +#endif + +/** + * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE"). + * @param __HANDLE__ COMP handle + * @retval None + */ +#define COMP_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_COMP_ERROR_NONE) + +/** + * @brief Enable the specified comparator. + * @param __HANDLE__ COMP handle + * @retval None + */ +#define __HAL_COMP_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN) + +/** + * @brief Disable the specified comparator. + * @param __HANDLE__ COMP handle + * @retval None + */ +#define __HAL_COMP_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN) + +/** + * @brief Lock the specified comparator configuration. + * @note Using this macro induce HAL COMP handle state machine being no + * more in line with COMP instance state. + * To keep HAL COMP handle state machine updated, it is recommended + * to use function "HAL_COMP_Lock')". + * @param __HANDLE__ COMP handle + * @retval None + */ +#define __HAL_COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) + +/** + * @brief Check whether the specified comparator is locked. + * @param __HANDLE__ COMP handle + * @retval Value 0 if COMP instance is not locked, value 1 if COMP instance is locked + */ +#define __HAL_COMP_IS_LOCKED(__HANDLE__) (READ_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) == COMP_CSR_LOCK) + +/** + * @} + */ + +/** @defgroup COMP_Exti_Management COMP external interrupt line management + * @{ + */ + +/** + * @brief Enable the COMP1 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP1 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP1 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ + LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP1); \ + LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP1); \ + } while(0) + +/** + * @brief Disable the COMP1 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ + LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP1); \ + LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP1); \ + } while(0) + +/** + * @brief Enable the COMP1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() LL_EXTI_EnableIT_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() LL_EXTI_DisableIT_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Generate a software interrupt on the COMP1 EXTI line. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() LL_EXTI_GenerateSWI_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP1 EXTI line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() LL_EXTI_EnableEvent_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Disable the COMP1 EXTI line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() LL_EXTI_DisableEvent_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Check whether the COMP1 EXTI line rising flag is set. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP1_EXTI_GET_RISING_FLAG() LL_EXTI_IsActiveRisingFlag_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Clear the COMP1 EXTI rising flag. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG() LL_EXTI_ClearRisingFlag_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Check whether the COMP1 EXTI line falling flag is set. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP1_EXTI_GET_FALLING_FLAG() LL_EXTI_IsActiveFallingFlag_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Clear the COMP1 EXTI falling flag. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_CLEAR_FALLING_FLAG() LL_EXTI_ClearFallingFlag_0_31(COMP_EXTI_LINE_COMP1) + +/** + * @brief Enable the COMP2 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP2 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP2 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ + LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP2); \ + LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP2); \ + } while(0) + +/** + * @brief Disable the COMP2 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ + LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP2); \ + LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP2); \ + } while(0) + +/** + * @brief Enable the COMP2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() LL_EXTI_EnableIT_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() LL_EXTI_DisableIT_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Generate a software interrupt on the COMP2 EXTI line. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() LL_EXTI_GenerateSWI_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP2 EXTI line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() LL_EXTI_EnableEvent_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP2 EXTI line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() LL_EXTI_DisableEvent_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Check whether the COMP2 EXTI line rising flag is set. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP2_EXTI_GET_RISING_FLAG() LL_EXTI_IsActiveRisingFlag_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Clear the COMP2 EXTI rising flag. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_CLEAR_RISING_FLAG() LL_EXTI_ClearRisingFlag_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Check whether the COMP2 EXTI line falling flag is set. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP2_EXTI_GET_FALLING_FLAG() LL_EXTI_IsActiveFallingFlag_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Clear the COMP2 EXTI falling flag. + * @retval None + */ +#define __HAL_COMP_COMP2_EXTI_CLEAR_FALLING_FLAG() LL_EXTI_ClearFallingFlag_0_31(COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP3 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Disable the COMP3 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Enable the COMP3 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Disable the COMP3 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Enable the COMP3 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ + LL_EXTI_EnableRisingTrig_0_31(COMP_EXTI_LINE_COMP3); \ + LL_EXTI_EnableFallingTrig_0_31(COMP_EXTI_LINE_COMP3); \ + } while(0) + +/** + * @brief Disable the COMP3 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ + LL_EXTI_DisableRisingTrig_0_31(COMP_EXTI_LINE_COMP3); \ + LL_EXTI_DisableFallingTrig_0_31(COMP_EXTI_LINE_COMP3); \ + } while(0) + +/** + * @brief Enable the COMP3 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_ENABLE_IT() LL_EXTI_EnableIT_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Disable the COMP3 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_DISABLE_IT() LL_EXTI_DisableIT_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Generate a software interrupt on the COMP3 EXTI line. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_GENERATE_SWIT() LL_EXTI_GenerateSWI_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Enable the COMP3 EXTI line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_ENABLE_EVENT() LL_EXTI_EnableEvent_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Disable the COMP3 EXTI line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_DISABLE_EVENT() LL_EXTI_DisableEvent_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Check whether the COMP3 EXTI line rising flag is set. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP3_EXTI_GET_RISING_FLAG() LL_EXTI_IsActiveRisingFlag_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Clear the COMP3 EXTI rising flag. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_CLEAR_RISING_FLAG() LL_EXTI_ClearRisingFlag_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Check whether the COMP3 EXTI line falling flag is set. + * @retval RESET or SET + */ +#define __HAL_COMP_COMP3_EXTI_GET_FALLING_FLAG() LL_EXTI_IsActiveFallingFlag_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @brief Clear the COMP3 EXTI falling flag. + * @retval None + */ +#define __HAL_COMP_COMP3_EXTI_CLEAR_FALLING_FLAG() LL_EXTI_ClearFallingFlag_0_31(COMP_EXTI_LINE_COMP3) + +/** + * @} + */ + +/** + * @} + */ + + +/* Private types -------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup COMP_Private_Constants COMP Private Constants + * @{ + */ + +/** @defgroup COMP_WindowMode_Instance_Differentiator COMP window mode instance differentiator + * @{ + */ +#define COMP_WINDOWMODE_COMP2 0x00001000U /*!< COMP window mode using common input of COMP instance: COMP2 */ +/** + * @} + */ + +/** @defgroup COMP_ExtiLine COMP EXTI Lines + * @{ + */ +#define COMP_EXTI_LINE_COMP1 (EXTI_IMR1_IM17) /*!< EXTI line 17 connected to COMP1 output */ +#define COMP_EXTI_LINE_COMP2 (EXTI_IMR1_IM18) /*!< EXTI line 18 connected to COMP2 output */ +#if defined(COMP3) +#define COMP_EXTI_LINE_COMP3 (EXTI_IMR1_IM20) /*!< EXTI line 20 connected to COMP3 output */ +#endif +/** + * @} + */ + +/** @defgroup COMP_ExtiLine COMP EXTI Lines + * @{ + */ +#define COMP_EXTI_IT (0x00000001UL) /*!< EXTI line event with interruption */ +#define COMP_EXTI_EVENT (0x00000002UL) /*!< EXTI line event only (without interruption) */ +#define COMP_EXTI_RISING (0x00000010UL) /*!< EXTI line event on rising edge */ +#define COMP_EXTI_FALLING (0x00000020UL) /*!< EXTI line event on falling edge */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup COMP_Private_Macros COMP Private Macros + * @{ + */ + +/** @defgroup COMP_GET_EXTI_LINE COMP private macros to get EXTI line associated with comparators + * @{ + */ +/** + * @brief Get the specified EXTI line for a comparator instance. + * @param __INSTANCE__ specifies the COMP instance. + * @retval value of @ref COMP_ExtiLine + */ +#if defined(COMP3) +#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 \ + :((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2 \ + : COMP_EXTI_LINE_COMP3) +#else +#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 \ + : COMP_EXTI_LINE_COMP2) +#endif +/** + * @} + */ + +/** @defgroup COMP_IS_COMP_Private_Definitions COMP private macros to check input parameters + * @{ + */ +#if defined(COMP3) +#define IS_COMP_WINDOWMODE(__INSTANCE__, __WINDOWMODE__) \ +(((__INSTANCE__) == COMP3) \ + ? \ + (((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE) || \ + ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) ) \ + :\ + (((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE) || \ + ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)|| \ + ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) ) \ +) +#else +#define IS_COMP_WINDOWMODE(__INSTANCE__, __WINDOWMODE__) \ +(((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE) || \ + ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)|| \ + ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) ) +#endif + +#define IS_COMP_WINDOWOUTPUT(__WINDOWOUTPUT__) (((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_EACH_COMP) || \ + ((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_COMP1) || \ + ((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_COMP2) || \ + ((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_BOTH) ) + +#define IS_COMP_POWERMODE(__POWERMODE__) (((__POWERMODE__) == COMP_POWERMODE_HIGHSPEED) || \ + ((__POWERMODE__) == COMP_POWERMODE_MEDIUMSPEED) ) + +#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO1) || \ + ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2) || \ + ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO3)) + +#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2) || \ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3)) + +#define IS_COMP_HYSTERESIS(__HYSTERESIS__) (((__HYSTERESIS__) == COMP_HYSTERESIS_NONE) || \ + ((__HYSTERESIS__) == COMP_HYSTERESIS_LOW) || \ + ((__HYSTERESIS__) == COMP_HYSTERESIS_MEDIUM) || \ + ((__HYSTERESIS__) == COMP_HYSTERESIS_HIGH)) + +#define IS_COMP_OUTPUTPOL(__POL__) (((__POL__) == COMP_OUTPUTPOL_NONINVERTED) || \ + ((__POL__) == COMP_OUTPUTPOL_INVERTED)) + +#define IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__) \ + ( ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE) \ + || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC4) \ + || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5) \ + || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3) \ + || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3) \ + || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM15_OC2) \ + ) + +/* Note: Output blanking source common to all COMP instances */ +/* Macro kept for compatibility with other STM32 series */ +#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__) \ + (IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__)) + + +#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \ + ((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \ + ((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \ + ((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \ + ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \ + ((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \ + ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING)) + +#define IS_COMP_OUTPUT_LEVEL(__OUTPUT_LEVEL__) (((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_LOW) || \ + ((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_HIGH)) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_Exported_Functions + * @{ + */ + +/** @addtogroup COMP_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, + pCOMP_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup COMP_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup COMP_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); +/* Callback in interrupt mode */ +void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral State functions **************************************************/ +/** @addtogroup COMP_Exported_Functions_Group4 + * @{ + */ +HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* COMP1 || COMP2 */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_COMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_conf_template.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_conf_template.h new file mode 100644 index 0000000..0398830 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_conf_template.h @@ -0,0 +1,356 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32g0xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CONF_H +#define STM32G0xx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CEC_MODULE_ENABLED +#define HAL_COMP_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_FDCAN_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LPTIM_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_CEC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_I2S_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_HCD_REGISTER_CALLBACKS 0u +#define USE_HAL_PCD_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ +#endif + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S1 peripheral + * This value is used by the RCC HAL module to compute the I2S1 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S1_CLOCK_VALUE) +#define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/ +#endif /* EXTERNAL_I2S1_CLOCK_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief External clock source for I2S2 peripheral + * This value is used by the RCC HAL module to compute the I2S2 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S2_CLOCK_VALUE) + #define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/ +#endif /* EXTERNAL_I2S2_CLOCK_VALUE */ +#endif + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 1U + + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include modules header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32g0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32g0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32g0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32g0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32g0xx_hal_adc.h" +#include "stm32g0xx_hal_adc_ex.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32g0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32g0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32g0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32g0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32g0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32g0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32g0xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32g0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32g0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32g0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32g0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32g0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32g0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32g0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32g0xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32g0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32g0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32g0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32g0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32g0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32g0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32g0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32g0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32g0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32g0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h new file mode 100644 index 0000000..c6062c4 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h @@ -0,0 +1,387 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CORTEX_H +#define STM32G0xx_HAL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. + */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +} MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) +#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions *************************************************/ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1U) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) > SysTick_IRQn) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CORTEX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h new file mode 100644 index 0000000..35c7e6a --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h @@ -0,0 +1,344 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc.h + * @author MCD Application Team + * @brief Header file of CRC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CRC_H +#define STM32G0xx_HAL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CRC_Exported_Types CRC Exported Types + * @{ + */ + +/** + * @brief CRC HAL State Structure definition + */ +typedef enum +{ + HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */ + HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */ + HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */ + HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */ + HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */ +} HAL_CRC_StateTypeDef; + +/** + * @brief CRC Init Structure definition + */ +typedef struct +{ + uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used. + If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default + X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1. + In that case, there is no need to set GeneratingPolynomial field. + If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */ + + uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. + If set to DEFAULT_INIT_VALUE_ENABLE, resort to default + 0xFFFFFFFF value. In that case, there is no need to set InitValue field. + If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */ + + uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree + respectively equal to 7, 8, 16 or 32. This field is written in normal representation, + e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65. + No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE. */ + + uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length. + Value can be either one of + @arg @ref CRC_POLYLENGTH_32B (32-bit CRC), + @arg @ref CRC_POLYLENGTH_16B (16-bit CRC), + @arg @ref CRC_POLYLENGTH_8B (8-bit CRC), + @arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */ + + uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse + is set to DEFAULT_INIT_VALUE_ENABLE. */ + + uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. + Can be either one of the following values + @arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion + @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2 + @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C + @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */ + + uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode. + Can be either + @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion, + @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted into 0x22CC4488 */ +} CRC_InitTypeDef; + +/** + * @brief CRC Handle Structure definition + */ +typedef struct +{ + CRC_TypeDef *Instance; /*!< Register base address */ + + CRC_InitTypeDef Init; /*!< CRC configuration parameters */ + + HAL_LockTypeDef Lock; /*!< CRC Locking object */ + + __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ + + uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. + Can be either + @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bit data) + + Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error + must occur if InputBufferFormat is not one of the three values listed above */ +} CRC_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial + * @{ + */ +#define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used + * @{ + */ +#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */ +#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used + * @{ + */ +#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */ +#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral + * @{ + */ +#define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */ +#define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */ +#define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */ +#define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions + * @{ + */ +#define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */ +#define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */ +#define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */ +#define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */ +/** + * @} + */ + +/** @defgroup CRC_Input_Buffer_Format Input Buffer Format + * @{ + */ +/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but + * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set + * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for + * the CRC APIs to provide a correct result */ +#define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */ +#define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */ +#define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */ +#define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */ +/** + * @} + */ + +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRC_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @brief Reset CRC handle state. + * @param __HANDLE__ CRC handle. + * @retval None + */ +#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) + +/** + * @brief Reset CRC Data Register. + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) + +/** + * @brief Set CRC INIT non-default value + * @param __HANDLE__ CRC handle + * @param __INIT__ 32-bit initial value + * @retval None + */ +#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__)) + +/** + * @brief Store data in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @param __VALUE__ Value to be stored in the ID register + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval None + */ +#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) + +/** + * @brief Return the data stored in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval Value of the ID register + */ +#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRC_Private_Macros CRC Private Macros + * @{ + */ + +#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \ + ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE)) + + +#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \ + ((VALUE) == DEFAULT_INIT_VALUE_DISABLE)) + +#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \ + ((LENGTH) == CRC_POLYLENGTH_16B) || \ + ((LENGTH) == CRC_POLYLENGTH_8B) || \ + ((LENGTH) == CRC_POLYLENGTH_7B)) + +#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS)) + +/** + * @} + */ + +/* Include CRC HAL Extended module */ +#include "stm32g0xx_hal_crc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CRC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc_ex.h new file mode 100644 index 0000000..de6c71d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc_ex.h @@ -0,0 +1,153 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc_ex.h + * @author MCD Application Team + * @brief Header file of CRC HAL extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CRC_EX_H +#define STM32G0xx_HAL_CRC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants + * @{ + */ + +/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes + * @{ + */ +#define CRC_INPUTDATA_INVERSION_NONE 0x00000000U /*!< No input data inversion */ +#define CRC_INPUTDATA_INVERSION_BYTE CRC_CR_REV_IN_0 /*!< Byte-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_HALFWORD CRC_CR_REV_IN_1 /*!< HalfWord-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_WORD CRC_CR_REV_IN /*!< Word-wise input data inversion */ +/** + * @} + */ + +/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes + * @{ + */ +#define CRC_OUTPUTDATA_INVERSION_DISABLE 0x00000000U /*!< No output data inversion */ +#define CRC_OUTPUTDATA_INVERSION_ENABLE CRC_CR_REV_OUT /*!< Bit-wise output data inversion */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros + * @{ + */ + +/** + * @brief Set CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT) + +/** + * @brief Unset CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT)) + +/** + * @brief Set CRC non-default polynomial + * @param __HANDLE__ CRC handle + * @param __POLYNOMIAL__ 7, 8, 16 or 32-bit polynomial + * @retval None + */ +#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__)) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRCEx_Private_Macros CRC Extended Private Macros + * @{ + */ + +#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_WORD)) + +#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \ + ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLE)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRCEx_Exported_Functions + * @{ + */ + +/** @addtogroup CRCEx_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength); +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode); +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CRC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cryp.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cryp.h new file mode 100644 index 0000000..da86e3b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cryp.h @@ -0,0 +1,648 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cryp.h + * @author MCD Application Team + * @brief Header file of CRYP HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CRYP_H +#define STM32G0xx_HAL_CRYP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#if defined(AES) + +/** @defgroup CRYP CRYP + * @brief CRYP HAL module driver. + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Types CRYP Exported Types + * @{ + */ + +/** + * @brief CRYP Init Structure definition + */ + +typedef struct +{ + uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. + This parameter can be a value of @ref CRYP_Data_Type */ + uint32_t KeySize; /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1. + 128 or 256 bit key length in TinyAES This parameter can be a value of @ref CRYP_Key_Size */ + uint32_t *pKey; /*!< The key used for encryption/decryption */ + uint32_t *pInitVect; /*!< The initialization vector used also as initialization + counter in CTR mode */ + uint32_t Algorithm; /*!< DES/ TDES Algorithm ECB/CBC + AES Algorithm ECB/CBC/CTR/GCM or CCM + This parameter can be a value of @ref CRYP_Algorithm_Mode */ + uint32_t *Header; /*!< used only in AES GCM and CCM Algorithm for authentication, + GCM : also known as Additional Authentication Data + CCM : named B1 composed of the associated data length and Associated Data. */ + uint32_t HeaderSize; /*!< The size of header buffer */ + uint32_t *B0; /*!< B0 is first authentication block used only in AES CCM mode */ + uint32_t DataWidthUnit; /*!< Payload Data Width Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/ + uint32_t HeaderWidthUnit; /*!< Header Width Unit, this parameter can be value of @ref CRYP_Header_Width_Unit*/ + uint32_t KeyIVConfigSkip; /*!< CRYP peripheral Key and IV configuration skip, to config Key and Initialization + Vector only once and to skip configuration for consecutive processings. + This parameter can be a value of @ref CRYP_Configuration_Skip */ + +} CRYP_ConfigTypeDef; + + +/** + * @brief CRYP State Structure definition + */ + +typedef enum +{ + HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */ + HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */ + HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP BUSY, internal processing is ongoing */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + HAL_CRYP_STATE_SUSPENDED = 0x03U, /*!< CRYP suspended */ +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +} HAL_CRYP_STATETypeDef; + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief HAL CRYP mode suspend definitions + */ +typedef enum +{ + HAL_CRYP_SUSPEND_NONE = 0x00U, /*!< CRYP processing suspension not requested */ + HAL_CRYP_SUSPEND = 0x01U /*!< CRYP processing suspension requested */ +}HAL_SuspendTypeDef; +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +/** + * @brief CRYP handle Structure definition + */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) +typedef struct __CRYP_HandleTypeDef +#else +typedef struct +#endif +{ + AES_TypeDef *Instance; /*!< AES Register base address */ + + CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */ + + FunctionalState AutoKeyDerivation; /*!< Used only in TinyAES to allow to bypass or not key write-up before decryption. + This parameter can be a value of ENABLE/DISABLE */ + + uint32_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ + + uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ + + __IO uint16_t CrypHeaderCount; /*!< Counter of header data in words */ + + __IO uint16_t CrypInCount; /*!< Counter of input data in words */ + + __IO uint16_t CrypOutCount; /*!< Counter of output data in words */ + + uint16_t Size; /*!< Length of input data */ + + uint32_t Phase; /*!< CRYP peripheral phase */ + + DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ + + DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< CRYP locking object */ + + __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ + + __IO uint32_t ErrorCode; /*!< CRYP peripheral error code */ + + uint32_t KeyIVConfig; /*!< CRYP peripheral Key and IV configuration flag, used when + configuration can be skipped */ + + uint32_t SizesSum; /*!< Sum of successive payloads lengths (in bytes), stored + for a single signature computation after several + messages processing */ + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + void (*InCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Input FIFO transfer completed callback */ + void (*OutCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Output FIFO transfer completed callback */ + void (*ErrorCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Error callback */ + + void (* MspInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp Init callback */ + void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp DeInit callback */ + +#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + + __IO HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */ + + CRYP_ConfigTypeDef Init_saved; /*!< copy of CRYP required parameters when processing is suspended */ + + uint32_t *pCrypInBuffPtr_saved; /*!< copy of CRYP input pointer when processing is suspended */ + + uint32_t *pCrypOutBuffPtr_saved; /*!< copy of CRYP output pointer when processing is suspended */ + + uint32_t CrypInCount_saved; /*!< copy of CRYP input data counter when processing is suspended */ + + uint32_t CrypOutCount_saved; /*!< copy of CRYP output data counter when processing is suspended */ + + uint32_t Phase_saved; /*!< copy of CRYP authentication phase when processing is suspended */ + + __IO HAL_CRYP_STATETypeDef State_saved; /*!< copy of CRYP peripheral state when processing is suspended */ + + uint32_t IV_saved[4]; /*!< copy of Initialisation Vector registers */ + + uint32_t SUSPxR_saved[8]; /*!< copy of suspension registers */ + + uint32_t CR_saved; /*!< copy of CRYP control register when processing is suspended*/ + + uint32_t Key_saved[8]; /*!< copy of key registers */ + + uint16_t Size_saved; /*!< copy of input buffer size */ + + uint16_t CrypHeaderCount_saved; /*!< copy of CRYP header data counter when processing is suspended */ + + uint32_t SizesSum_saved; /*!< copy of SizesSum when processing is suspended */ + + uint32_t ResumingFlag; /*!< resumption flag to bypass steps already carried out */ + + FunctionalState AutoKeyDerivation_saved; /*!< copy of CRYP handle auto key derivation parameter */ + +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +} CRYP_HandleTypeDef; + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition + * @brief HAL CRYP Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_CRYP_MSPINIT_CB_ID = 0x00U, /*!< CRYP MspInit callback ID */ + HAL_CRYP_MSPDEINIT_CB_ID = 0x01U, /*!< CRYP MspDeInit callback ID */ + HAL_CRYP_INPUT_COMPLETE_CB_ID = 0x02U, /*!< CRYP Input FIFO transfer completed callback ID */ + HAL_CRYP_OUTPUT_COMPLETE_CB_ID = 0x03U, /*!< CRYP Output FIFO transfer completed callback ID */ + HAL_CRYP_ERROR_CB_ID = 0x04U, /*!< CRYP Error callback ID */ +} HAL_CRYP_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition + * @brief HAL CRYP Callback pointer definition + * @{ + */ + +typedef void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp); /*!< pointer to a common CRYP callback function */ + +/** + * @} + */ + +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Constants CRYP Exported Constants + * @{ + */ + +/** @defgroup CRYP_Error_Definition CRYP Error Definition + * @{ + */ +#define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_CRYP_ERROR_WRITE 0x00000001U /*!< Write error */ +#define HAL_CRYP_ERROR_READ 0x00000002U /*!< Read error */ +#define HAL_CRYP_ERROR_DMA 0x00000004U /*!< DMA error */ +#define HAL_CRYP_ERROR_BUSY 0x00000008U /*!< Busy flag error */ +#define HAL_CRYP_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */ +#define HAL_CRYP_ERROR_NOT_SUPPORTED 0x00000020U /*!< Not supported mode */ +#define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U /*!< Sequence are not respected only for GCM or CCM */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +#define HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit + * @{ + */ + +#define CRYP_DATAWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */ +#define CRYP_DATAWIDTHUNIT_BYTE 0x00000001U /*!< By default, size unit is byte */ + +/** + * @} + */ + +/** @defgroup CRYP_Header_Width_Unit CRYP Header Width Unit + * @{ + */ + +#define CRYP_HEADERWIDTHUNIT_WORD 0x00000000U /*!< By default, header size unit is word */ +#define CRYP_HEADERWIDTHUNIT_BYTE 0x00000001U /*!< By default, header size unit is byte */ + +/** + * @} + */ + +/** @defgroup CRYP_Algorithm_Mode CRYP Algorithm Mode + * @{ + */ + +#define CRYP_AES_ECB 0x00000000U /*!< Electronic codebook chaining algorithm */ +#define CRYP_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */ +#define CRYP_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */ +#define CRYP_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */ +#define CRYP_AES_CCM AES_CR_CHMOD_2 /*!< Counter with Cipher Mode */ + +/** + * @} + */ + +/** @defgroup CRYP_Key_Size CRYP Key Size + * @{ + */ + +#define CRYP_KEYSIZE_128B 0x00000000U /*!< 128-bit long key */ +#define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */ + +/** + * @} + */ + +/** @defgroup CRYP_Data_Type CRYP Data Type + * @{ + */ + +#define CRYP_DATATYPE_32B 0x00000000U /*!< 32-bit data type (no swapping) */ +#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */ +#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */ +#define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */ + +/** + * @} + */ + +/** @defgroup CRYP_Interrupt CRYP Interrupt + * @{ + */ + +#define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */ +#define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */ +#define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */ +#define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */ +#define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */ + +/** + * @} + */ + +/** @defgroup CRYP_Flags CRYP Flags + * @{ + */ + +/* status flags */ +#define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */ +#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */ +#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */ +#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */ +/* clearing flags */ +#define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */ +#define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */ + +/** + * @} + */ + +/** @defgroup CRYP_Configuration_Skip CRYP Key and IV Configuration Skip Mode + * @{ + */ + +#define CRYP_KEYIVCONFIG_ALWAYS 0x00000000U /*!< Peripheral Key and IV configuration to do systematically */ +#define CRYP_KEYIVCONFIG_ONCE 0x00000001U /*!< Peripheral Key and IV configuration to do only once */ + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Macros CRYP Exported Macros + * @{ + */ + +/** @brief Reset CRYP handle state + * @param __HANDLE__ specifies the CRYP handle. + * @retval None + */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_CRYP_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0U) +#else +#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET) +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/** + * @brief Enable/Disable the CRYP peripheral. + * @param __HANDLE__ specifies the CRYP handle. + * @retval None + */ + +#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= AES_CR_EN) +#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~AES_CR_EN) + + +/** @brief Check whether the specified CRYP status flag is set or not. + * @param __HANDLE__ specifies the CRYP handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden + * @arg @ref CRYP_IT_WRERR Write Error + * @arg @ref CRYP_IT_RDERR Read Error + * @arg @ref CRYP_IT_CCF Computation Complete + * This parameter can be one of the following values for CRYP: + * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data + * or a key preparation (for AES decryption). + * @arg CRYP_FLAG_IFEM: Input FIFO is empty + * @arg CRYP_FLAG_IFNF: Input FIFO is not full + * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending + * @arg CRYP_FLAG_OFNE: Output FIFO is not empty + * @arg CRYP_FLAG_OFFU: Output FIFO is full + * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending + * @retval The state of __FLAG__ (TRUE or FALSE). + */ + +#define CRYP_FLAG_MASK 0x0000001FU +#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the CRYP pending status flag. + * @param __HANDLE__ specifies the CRYP handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear + * @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear + * @retval None + */ + +#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT((__HANDLE__)->Instance->CR, (__FLAG__)) + + +/** @brief Check whether the specified CRYP interrupt source is enabled or not. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ CRYP interrupt source to check + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + * @retval State of interruption (TRUE or FALSE). + */ + +#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Check whether the specified CRYP interrupt is set or not. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ specifies the interrupt to check. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_WRERR Write Error + * @arg @ref CRYP_IT_RDERR Read Error + * @arg @ref CRYP_IT_CCF Computation Complete + * This parameter can be one of the following values for CRYP: + * @arg CRYP_IT_INI: Input FIFO service masked interrupt status + * @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ + +#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Enable the CRYP interrupt. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ CRYP Interrupt. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + * This parameter can be one of the following values for CRYP: + * @ CRYP_IT_INI : Input FIFO service interrupt mask. + * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. + * @retval None + */ + +#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) + +/** + * @brief Disable the CRYP interrupt. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ CRYP Interrupt. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + * This parameter can be one of the following values for CRYP: + * @ CRYP_IT_INI : Input FIFO service interrupt mask. + * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. + * @retval None + */ + +#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) + +/** + * @} + */ + +/* Include CRYP HAL Extended module */ +#include "stm32g0xx_hal_cryp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Functions CRYP Exported Functions + * @{ + */ + +/** @addtogroup CRYP_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); +HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, pCRYP_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp); +#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */ +/** + * @} + */ + +/** @addtogroup CRYP_Exported_Functions_Group2 + * @{ + */ + +/* encryption/decryption ***********************************/ +HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); + +/** + * @} + */ + + +/** @addtogroup CRYP_Exported_Functions_Group3 + * @{ + */ +/* Interrupt Handler functions **********************************************/ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); +uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRYP_Private_Macros CRYP Private Macros + * @{ + */ + +/** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters + * @{ + */ + +#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_AES_ECB) || \ + ((ALGORITHM) == CRYP_AES_CBC) || \ + ((ALGORITHM) == CRYP_AES_CTR) || \ + ((ALGORITHM) == CRYP_AES_GCM_GMAC)|| \ + ((ALGORITHM) == CRYP_AES_CCM)) + + +#define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B) || \ + ((KEYSIZE) == CRYP_KEYSIZE_256B)) + +#define IS_CRYP_DATATYPE(DATATYPE)(((DATATYPE) == CRYP_DATATYPE_32B) || \ + ((DATATYPE) == CRYP_DATATYPE_16B) || \ + ((DATATYPE) == CRYP_DATATYPE_8B) || \ + ((DATATYPE) == CRYP_DATATYPE_1B)) + +#define IS_CRYP_INIT(CONFIG)(((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \ + ((CONFIG) == CRYP_KEYIVCONFIG_ONCE)) + +#define IS_CRYP_BUFFERSIZE(ALGO, DATAWIDTH, SIZE) \ + (((((ALGO) == CRYP_AES_CTR)) && \ + ((((DATAWIDTH) == CRYP_DATAWIDTHUNIT_WORD) && (((SIZE) % 4U) == 0U)) || \ + (((DATAWIDTH) == CRYP_DATAWIDTHUNIT_BYTE) && (((SIZE) % 16U) == 0U)))) || \ + (((ALGO) == CRYP_AES_ECB) || ((ALGO) == CRYP_AES_CBC) || \ + ((ALGO)== CRYP_AES_GCM_GMAC) || ((ALGO) == CRYP_AES_CCM))) + +/** + * @} + */ + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Constants CRYP Private Constants + * @{ + */ + +/** + * @} + */ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup CRYP_Private_Defines CRYP Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Variables CRYP Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Functions CRYP Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* AES */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CRYP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cryp_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cryp_ex.h new file mode 100644 index 0000000..bb31cdb --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cryp_ex.h @@ -0,0 +1,133 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cryp_ex.h + * @author MCD Application Team + * @brief Header file of CRYPEx HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CRYP_EX_H +#define STM32G0xx_HAL_CRYP_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#if defined(AES) + +/** @defgroup CRYPEx CRYPEx + * @brief CRYP Extension HAL module driver. + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Private types -------------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Types CRYPEx Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions + * @{ + */ + +/** @addtogroup CRYPEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout); + +/** + * @} + */ + +/** @addtogroup CRYPEx_Exported_Functions_Group2 + * @{ + */ +void HAL_CRYPEx_EnableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp); +void HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* AES */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CRYP_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h new file mode 100644 index 0000000..18634a5 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h @@ -0,0 +1,533 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac.h + * @author MCD Application Team + * @brief Header file of DAC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DAC_H +#define STM32G0xx_HAL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined(DAC1) + +/** @addtogroup DAC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Types DAC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */ + HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */ + HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */ + HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */ + HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */ + +} HAL_DAC_StateTypeDef; + +/** + * @brief DAC handle Structure definition + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +typedef struct __DAC_HandleTypeDef +#else +typedef struct +#endif +{ + DAC_TypeDef *Instance; /*!< Register base address */ + + __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ + + HAL_LockTypeDef Lock; /*!< DAC locking object */ + + DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ + + DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */ + + __IO uint32_t ErrorCode; /*!< DAC Error code */ + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ConvHalfCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ErrorCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* DMAUnderrunCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ConvCpltCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + void (* ConvHalfCpltCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + void (* ErrorCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + void (* DMAUnderrunCallbackCh2)(struct __DAC_HandleTypeDef *hdac); + + void (* MspInitCallback)(struct __DAC_HandleTypeDef *hdac); + void (* MspDeInitCallback)(struct __DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +} DAC_HandleTypeDef; + +/** + * @brief DAC Configuration sample and hold Channel structure definition + */ +typedef struct +{ + uint32_t DAC_SampleTime ; /*!< Specifies the Sample time for the selected channel. + This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE. + This parameter must be a number between Min_Data = 0 and Max_Data = 1023 */ + + uint32_t DAC_HoldTime ; /*!< Specifies the hold time for the selected channel + This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE. + This parameter must be a number between Min_Data = 0 and Max_Data = 1023 */ + + uint32_t DAC_RefreshTime ; /*!< Specifies the refresh time for the selected channel + This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE. + This parameter must be a number between Min_Data = 0 and Max_Data = 255 */ +} DAC_SampleAndHoldConfTypeDef; + +/** + * @brief DAC Configuration regular Channel structure definition + */ +typedef struct +{ + uint32_t DAC_SampleAndHold; /*!< Specifies whether the DAC mode. + This parameter can be a value of @ref DAC_SampleAndHold */ + + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ + + uint32_t DAC_ConnectOnChipPeripheral ; /*!< Specifies whether the DAC output is connected or not to on chip peripheral . + This parameter can be a value of @ref DAC_ConnectOnChipPeripheral */ + + uint32_t DAC_UserTrimming; /*!< Specifies the trimming mode + This parameter must be a value of @ref DAC_UserTrimming + DAC_UserTrimming is either factory or user trimming */ + + uint32_t DAC_TrimmingValue; /*!< Specifies the offset trimming value + i.e. when DAC_SampleAndHold is DAC_TRIMMING_USER. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + DAC_SampleAndHoldConfTypeDef DAC_SampleAndHoldConfig; /*!< Sample and Hold settings */ + +} DAC_ChannelConfTypeDef; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DAC Callback ID enumeration definition + */ +typedef enum +{ + HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */ + HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */ + HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */ + HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */ + HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */ + HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */ + HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */ + HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */ + HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */ + HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */ + HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */ +} HAL_DAC_CallbackIDTypeDef; + +/** + * @brief HAL DAC Callback pointer definition + */ +typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_Error_Code DAC Error Code + * @{ + */ +#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */ +#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */ +#define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */ +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DAC_trigger_selection DAC trigger selection + * @{ + */ +#define DAC_TRIGGER_NONE 0x00000000U /*!< Conversion is automatic once the DAC_DHRxxxx register has been loaded, and not by external trigger */ +#define DAC_TRIGGER_SOFTWARE (DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ +#define DAC_TRIGGER_T1_TRGO (DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM1 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T2_TRGO (DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T3_TRGO (DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T6_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T7_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T15_TRGO (DAC_CR_TSEL1_3 | DAC_CR_TEN1) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_LPTIM1_OUT (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< LPTIM1_OUT selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_LPTIM2_OUT (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TEN1) /*!< LPTIM2_OUT selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_EXT_IT9 (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ + +/** + * @} + */ + +/** @defgroup DAC_output_buffer DAC output buffer + * @{ + */ +#define DAC_OUTPUTBUFFER_ENABLE 0x00000000U +#define DAC_OUTPUTBUFFER_DISABLE (DAC_MCR_MODE1_1) + +/** + * @} + */ + +/** @defgroup DAC_Channel_selection DAC Channel selection + * @{ + */ +#define DAC_CHANNEL_1 0x00000000U +#define DAC_CHANNEL_2 0x00000010U +/** + * @} + */ + +/** @defgroup DAC_data_alignment DAC data alignment + * @{ + */ +#define DAC_ALIGN_12B_R 0x00000000U +#define DAC_ALIGN_12B_L 0x00000004U +#define DAC_ALIGN_8B_R 0x00000008U + +/** + * @} + */ + +/** @defgroup DAC_flags_definition DAC flags definition + * @{ + */ +#define DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) +#define DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) + +/** + * @} + */ + +/** @defgroup DAC_IT_definition DAC IT definition + * @{ + */ +#define DAC_IT_DMAUDR1 (DAC_SR_DMAUDR1) +#define DAC_IT_DMAUDR2 (DAC_SR_DMAUDR2) + +/** + * @} + */ + +/** @defgroup DAC_ConnectOnChipPeripheral DAC ConnectOnChipPeripheral + * @{ + */ +#define DAC_CHIPCONNECT_DISABLE 0x00000000U +#define DAC_CHIPCONNECT_ENABLE (DAC_MCR_MODE1_0) + +/** + * @} + */ + +/** @defgroup DAC_UserTrimming DAC User Trimming + * @{ + */ +#define DAC_TRIMMING_FACTORY 0x00000000U /*!< Factory trimming */ +#define DAC_TRIMMING_USER 0x00000001U /*!< User trimming */ + +/** + * @} + */ +/** @defgroup DAC_SampleAndHold DAC power mode + * @{ + */ +#define DAC_SAMPLEANDHOLD_DISABLE 0x00000000U +#define DAC_SAMPLEANDHOLD_ENABLE (DAC_MCR_MODE1_2) + +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @brief Reset DAC handle state. + * @param __HANDLE__ specifies the DAC handle. + * @retval None + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_DAC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** @brief Enable the DAC channel. + * @param __HANDLE__ specifies the DAC handle. + * @param __DAC_Channel__ specifies the DAC channel + * @retval None + */ +#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) + +/** @brief Disable the DAC channel. + * @param __HANDLE__ specifies the DAC handle + * @param __DAC_Channel__ specifies the DAC channel. + * @retval None + */ +#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) + +/** @brief Set DHR12R1 alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008U + (__ALIGNMENT__)) + +/** @brief Set DHR12R2 alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014U + (__ALIGNMENT__)) + +/** @brief Set DHR12RD alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020U + (__ALIGNMENT__)) + +/** @brief Enable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) + +/** @brief Disable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) + +/** @brief Check whether the specified DAC interrupt source is enabled or not. + * @param __HANDLE__ DAC handle + * @param __INTERRUPT__ DAC interrupt source to check + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt + * @retval State of interruption (SET or RESET) + */ +#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Get the selected DAC's flag status. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to get. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the DAC's flag. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to clear. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DAC_Private_Macros DAC Private Macros + * @{ + */ +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ + ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) + +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ + ((CHANNEL) == DAC_CHANNEL_2)) + +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ + ((ALIGN) == DAC_ALIGN_12B_L) || \ + ((ALIGN) == DAC_ALIGN_8B_R)) + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U) + +#define IS_DAC_REFRESHTIME(TIME) ((TIME) <= 0x000000FFU) + +/** + * @} + */ + +/* Include DAC HAL Extended module */ +#include "stm32g0xx_hal_dac_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, + uint32_t Alignment); +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel); + +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac); + +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); + +void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/* DAC callback registering/unregistering */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel); + +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac); +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Functions DAC Private Functions + * @{ + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /*STM32G0xx_HAL_DAC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h new file mode 100644 index 0000000..f54e1d4 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h @@ -0,0 +1,231 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac_ex.h + * @author MCD Application Team + * @brief Header file of DAC HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DAC_EX_H +#define STM32G0xx_HAL_DAC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined(DAC1) + +/** @addtogroup DACEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL State structures definition + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Constants DACEx Exported Constants + * @{ + */ + +/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude + * @{ + */ +#define DAC_LFSRUNMASK_BIT0 0x00000000U /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TRIANGLEAMPLITUDE_1 0x00000000U /*!< Select max triangle amplitude of 1 */ +#define DAC_TRIANGLEAMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */ +#define DAC_TRIANGLEAMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 7 */ +#define DAC_TRIANGLEAMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */ +#define DAC_TRIANGLEAMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Select max triangle amplitude of 31 */ +#define DAC_TRIANGLEAMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */ +#define DAC_TRIANGLEAMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 127 */ +#define DAC_TRIANGLEAMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */ +#define DAC_TRIANGLEAMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Select max triangle amplitude of 511 */ +#define DAC_TRIANGLEAMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TRIANGLEAMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TRIANGLEAMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DACEx_Private_Macros DACEx Private Macros + * @{ + */ +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ + ((TRIGGER) == DAC_TRIGGER_SOFTWARE) || \ + ((TRIGGER) == DAC_TRIGGER_T1_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_LPTIM1_OUT) || \ + ((TRIGGER) == DAC_TRIGGER_LPTIM2_OUT) || \ + ((TRIGGER) == DAC_TRIGGER_EXT_IT9)) + + +#define IS_DAC_SAMPLETIME(TIME) ((TIME) <= 0x000003FFU) + +#define IS_DAC_HOLDTIME(TIME) ((TIME) <= 0x000003FFU) + +#define IS_DAC_SAMPLEANDHOLD(MODE) (((MODE) == DAC_SAMPLEANDHOLD_DISABLE) || \ + ((MODE) == DAC_SAMPLEANDHOLD_ENABLE)) + +#define IS_DAC_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU) + +#define IS_DAC_NEWTRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU) + +#define IS_DAC_CHIP_CONNECTION(CONNECT) (((CONNECT) == DAC_CHIPCONNECT_DISABLE) || \ + ((CONNECT) == DAC_CHIPCONNECT_ENABLE)) + +#define IS_DAC_TRIMMING(TRIMMING) (((TRIMMING) == DAC_TRIMMING_FACTORY) || \ + ((TRIMMING) == DAC_TRIMMING_USER)) + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/* Extended features functions ***********************************************/ + +/** @addtogroup DACEx_Exported_Functions + * @{ + */ + +/** @addtogroup DACEx_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ + +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); + +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac); + +void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac); + + +/** + * @} + */ + +/** @addtogroup DACEx_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ + +HAL_StatusTypeDef HAL_DACEx_SelfCalibrate(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_DACEx_SetUserTrimming(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel, + uint32_t NewTrimmingValue); +uint32_t HAL_DACEx_GetTrimOffset(DAC_HandleTypeDef *hdac, uint32_t Channel); + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DACEx_Private_Functions + * @{ + */ + +/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */ +/* are called by HAL_DAC_Start_DMA */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*STM32G0xx_HAL_DAC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h new file mode 100644 index 0000000..aac7360 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h @@ -0,0 +1,214 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DEF +#define STM32G0xx_HAL_DEF + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +/** @brief Reset the Handles State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handles "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handles "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) +/* Reserved for future use */ +#error " USE_RTOS should be 0 in the current HAL release " +#else +#define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + +#define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +/* GNU Compiler */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined (__GNUC__) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4U))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +/* ARM Compiler */ +#if defined (__CC_ARM) /* ARM Compiler V5 */ +#define __ALIGN_BEGIN __align(4U) +/* IAR Compiler */ +#elif defined (__ICCARM__) +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DEF */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h new file mode 100644 index 0000000..8a88f89 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h @@ -0,0 +1,803 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DMA_H +#define STM32G0xx_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_dma.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified channel. + This parameter can be a value of @ref DMA_request */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +} HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + +#if defined(DMA2) + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + +#endif + uint32_t ChannelIndex; /*!< DMA Channel Index */ + + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ +#define HAL_DMA_ERROR_BUSY 0x00000080U /*!< DMA Busy error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */ + +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#define DMA_REQUEST_MEM2MEM LL_DMAMUX_REQ_MEM2MEM /*!< memory to memory transfer */ +#define DMA_REQUEST_GENERATOR0 LL_DMAMUX_REQ_GENERATOR0 /*!< DMAMUX request generator 0 */ +#define DMA_REQUEST_GENERATOR1 LL_DMAMUX_REQ_GENERATOR1 /*!< DMAMUX request generator 1 */ +#define DMA_REQUEST_GENERATOR2 LL_DMAMUX_REQ_GENERATOR2 /*!< DMAMUX request generator 2 */ +#define DMA_REQUEST_GENERATOR3 LL_DMAMUX_REQ_GENERATOR3 /*!< DMAMUX request generator 3 */ +#define DMA_REQUEST_ADC1 LL_DMAMUX_REQ_ADC1 /*!< DMAMUX ADC1 request */ +#if defined(AES) +#define DMA_REQUEST_AES_IN LL_DMAMUX_REQ_AES_IN /*!< DMAMUX AES_IN request */ +#define DMA_REQUEST_AES_OUT LL_DMAMUX_REQ_AES_OUT /*!< DMAMUX AES_OUT request */ +#endif +#if defined(DAC1) +#define DMA_REQUEST_DAC1_CH1 LL_DMAMUX_REQ_DAC1_CH1 /*!< DMAMUX DAC_CH1 request */ +#define DMA_REQUEST_DAC1_CH2 LL_DMAMUX_REQ_DAC1_CH2 /*!< DMAMUX DAC_CH2 request */ +#endif +#define DMA_REQUEST_I2C1_RX LL_DMAMUX_REQ_I2C1_RX /*!< DMAMUX I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX LL_DMAMUX_REQ_I2C1_TX /*!< DMAMUX I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX LL_DMAMUX_REQ_I2C2_RX /*!< DMAMUX I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX LL_DMAMUX_REQ_I2C2_TX /*!< DMAMUX I2C2 TX request */ +#if defined(LPUART1) +#define DMA_REQUEST_LPUART1_RX LL_DMAMUX_REQ_LPUART1_RX /*!< DMAMUX LPUART1 RX request */ +#define DMA_REQUEST_LPUART1_TX LL_DMAMUX_REQ_LPUART1_TX /*!< DMAMUX LPUART1 TX request */ +#endif +#define DMA_REQUEST_SPI1_RX LL_DMAMUX_REQ_SPI1_RX /*!< DMAMUX SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX LL_DMAMUX_REQ_SPI1_TX /*!< DMAMUX SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX LL_DMAMUX_REQ_SPI2_RX /*!< DMAMUX SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX LL_DMAMUX_REQ_SPI2_TX /*!< DMAMUX SPI2 TX request */ +#define DMA_REQUEST_TIM1_CH1 LL_DMAMUX_REQ_TIM1_CH1 /*!< DMAMUX TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 LL_DMAMUX_REQ_TIM1_CH2 /*!< DMAMUX TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 LL_DMAMUX_REQ_TIM1_CH3 /*!< DMAMUX TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 LL_DMAMUX_REQ_TIM1_CH4 /*!< DMAMUX TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_TRIG_COM LL_DMAMUX_REQ_TIM1_TRIG_COM /*!< DMAMUX TIM1 TRIG COM request */ +#define DMA_REQUEST_TIM1_UP LL_DMAMUX_REQ_TIM1_UP /*!< DMAMUX TIM1 UP request */ +#if defined(TIM2) +#define DMA_REQUEST_TIM2_CH1 LL_DMAMUX_REQ_TIM2_CH1 /*!< DMAMUX TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 LL_DMAMUX_REQ_TIM2_CH2 /*!< DMAMUX TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 LL_DMAMUX_REQ_TIM2_CH3 /*!< DMAMUX TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 LL_DMAMUX_REQ_TIM2_CH4 /*!< DMAMUX TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_TRIG LL_DMAMUX_REQ_TIM2_TRIG /*!< DMAMUX TIM2 TRIG request */ +#define DMA_REQUEST_TIM2_UP LL_DMAMUX_REQ_TIM2_UP /*!< DMAMUX TIM2 UP request */ +#endif +#define DMA_REQUEST_TIM3_CH1 LL_DMAMUX_REQ_TIM3_CH1 /*!< DMAMUX TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 LL_DMAMUX_REQ_TIM3_CH2 /*!< DMAMUX TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 LL_DMAMUX_REQ_TIM3_CH3 /*!< DMAMUX TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 LL_DMAMUX_REQ_TIM3_CH4 /*!< DMAMUX TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_TRIG LL_DMAMUX_REQ_TIM3_TRIG /*!< DMAMUX TIM3 TRIG request */ +#define DMA_REQUEST_TIM3_UP LL_DMAMUX_REQ_TIM3_UP /*!< DMAMUX TIM3 UP request */ +#if defined(TIM6) +#define DMA_REQUEST_TIM6_UP LL_DMAMUX_REQ_TIM6_UP /*!< DMAMUX TIM6 UP request */ +#endif +#if defined(TIM7) +#define DMA_REQUEST_TIM7_UP LL_DMAMUX_REQ_TIM7_UP /*!< DMAMUX TIM7 UP request */ +#endif +#if defined(TIM15) +#define DMA_REQUEST_TIM15_CH1 LL_DMAMUX_REQ_TIM15_CH1 /*!< DMAMUX TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_CH2 LL_DMAMUX_REQ_TIM15_CH2 /*!< DMAMUX TIM15 CH2 request */ +#define DMA_REQUEST_TIM15_TRIG_COM LL_DMAMUX_REQ_TIM15_TRIG_COM /*!< DMAMUX TIM15 TRIG COM request */ +#define DMA_REQUEST_TIM15_UP LL_DMAMUX_REQ_TIM15_UP /*!< DMAMUX TIM15 UP request */ +#endif +#define DMA_REQUEST_TIM16_CH1 LL_DMAMUX_REQ_TIM16_CH1 /*!< DMAMUX TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_COM LL_DMAMUX_REQ_TIM16_COM /*!< DMAMUX TIM16 COM request */ +#define DMA_REQUEST_TIM16_UP LL_DMAMUX_REQ_TIM16_UP /*!< DMAMUX TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 LL_DMAMUX_REQ_TIM17_CH1 /*!< DMAMUX TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_COM LL_DMAMUX_REQ_TIM17_COM /*!< DMAMUX TIM17 COM request */ +#define DMA_REQUEST_TIM17_UP LL_DMAMUX_REQ_TIM17_UP /*!< DMAMUX TIM17 UP request */ +#define DMA_REQUEST_USART1_RX LL_DMAMUX_REQ_USART1_RX /*!< DMAMUX USART1 RX request */ +#define DMA_REQUEST_USART1_TX LL_DMAMUX_REQ_USART1_TX /*!< DMAMUX USART1 TX request */ +#define DMA_REQUEST_USART2_RX LL_DMAMUX_REQ_USART2_RX /*!< DMAMUX USART2 RX request */ +#define DMA_REQUEST_USART2_TX LL_DMAMUX_REQ_USART2_TX /*!< DMAMUX USART2 TX request */ +#if defined(USART3) +#define DMA_REQUEST_USART3_RX LL_DMAMUX_REQ_USART3_RX /*!< DMAMUX USART3 RX request */ +#define DMA_REQUEST_USART3_TX LL_DMAMUX_REQ_USART3_TX /*!< DMAMUX USART3 TX request */ +#endif +#if defined(USART4) +#define DMA_REQUEST_USART4_RX LL_DMAMUX_REQ_USART4_RX /*!< DMAMUX USART4 RX request */ +#define DMA_REQUEST_USART4_TX LL_DMAMUX_REQ_USART4_TX /*!< DMAMUX USART4 TX request */ +#endif +#if defined(UCPD1) +#define DMA_REQUEST_UCPD1_RX LL_DMAMUX_REQ_UCPD1_RX /*!< DMAMUX UCPD1 RX request */ +#define DMA_REQUEST_UCPD1_TX LL_DMAMUX_REQ_UCPD1_TX /*!< DMAMUX UCPD1 TX request */ +#endif +#if defined(UCPD2) +#define DMA_REQUEST_UCPD2_RX LL_DMAMUX_REQ_UCPD2_RX /*!< DMAMUX UCPD2 RX request */ +#define DMA_REQUEST_UCPD2_TX LL_DMAMUX_REQ_UCPD2_TX /*!< DMAMUX UCPD2 TX request */ +#endif + +#if defined(I2C3) +#define DMA_REQUEST_I2C3_RX LL_DMAMUX_REQ_I2C3_RX /*!< DMAMUX I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX LL_DMAMUX_REQ_I2C3_TX /*!< DMAMUX I2C3 TX request */ +#endif + +#if defined(LPUART2) +#define DMA_REQUEST_LPUART2_RX LL_DMAMUX_REQ_LPUART2_RX /*!< DMAMUX LPUART2 RX request */ +#define DMA_REQUEST_LPUART2_TX LL_DMAMUX_REQ_LPUART2_TX /*!< DMAMUX LPUART2 TX request */ +#endif + +#if defined(SPI3) +#define DMA_REQUEST_SPI3_RX LL_DMAMUX_REQ_SPI3_RX /*!< DMAMUX SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX LL_DMAMUX_REQ_SPI3_TX /*!< DMAMUX SPI3 TX request */ +#endif + +#if defined(TIM4) +#define DMA_REQUEST_TIM4_CH1 LL_DMAMUX_REQ_TIM4_CH1 /*!< DMAMUX TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 LL_DMAMUX_REQ_TIM4_CH2 /*!< DMAMUX TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 LL_DMAMUX_REQ_TIM4_CH3 /*!< DMAMUX TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_CH4 LL_DMAMUX_REQ_TIM4_CH4 /*!< DMAMUX TIM4 CH4 request */ +#define DMA_REQUEST_TIM4_TRIG LL_DMAMUX_REQ_TIM4_TRIG /*!< DMAMUX TIM4 TRIG request */ +#define DMA_REQUEST_TIM4_UP LL_DMAMUX_REQ_TIM4_UP /*!< DMAMUX TIM4 UP request */ +#endif + +#if defined(USART5) +#define DMA_REQUEST_USART5_RX LL_DMAMUX_REQ_USART5_RX /*!< DMAMUX USART5 RX request */ +#define DMA_REQUEST_USART5_TX LL_DMAMUX_REQ_USART5_TX /*!< DMAMUX USART5 TX request */ +#endif + +#if defined(USART6) +#define DMA_REQUEST_USART6_RX LL_DMAMUX_REQ_USART6_RX /*!< DMAMUX USART6 RX request */ +#define DMA_REQUEST_USART6_TX LL_DMAMUX_REQ_USART6_TX /*!< DMAMUX USART6 TX request */ +#endif + + +#define DMA_MAX_REQUEST LL_DMAMUX_MAX_REQ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY LL_DMA_DIRECTION_PERIPH_TO_MEMORY /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH LL_DMA_DIRECTION_MEMORY_TO_PERIPH /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY LL_DMA_DIRECTION_MEMORY_TO_MEMORY /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE LL_DMA_PERIPH_INCREMENT /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE LL_DMA_PERIPH_NOINCREMENT /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE LL_DMA_MEMORY_INCREMENT /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE LL_DMA_MEMORY_NOINCREMENT /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE LL_DMA_PDATAALIGN_BYTE /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD LL_DMA_PDATAALIGN_HALFWORD /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD LL_DMA_PDATAALIGN_WORD /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE LL_DMA_MDATAALIGN_BYTE /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD LL_DMA_MDATAALIGN_HALFWORD /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD LL_DMA_MDATAALIGN_WORD /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL LL_DMA_MODE_NORMAL /*!< Normal mode */ +#define DMA_CIRCULAR LL_DMA_MODE_CIRCULAR /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW LL_DMA_PRIORITY_LOW /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM LL_DMA_PRIORITY_MEDIUM /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH LL_DMA_PRIORITY_HIGH /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH LL_DMA_PRIORITY_VERYHIGH /*!< Priority level : Very_High */ +/** + * @} + */ + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC DMA_CCR_TCIE /*!< Transfer Complete interrupt */ +#define DMA_IT_HT DMA_CCR_HTIE /*!< Half Transfer Complete interrupt */ +#define DMA_IT_TE DMA_CCR_TEIE /*!< Transfer Error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ + +#define DMA_FLAG_GI1 DMA_ISR_GIF1 /*!< Global Interrupt flag for Channel 1 */ +#define DMA_FLAG_TC1 DMA_ISR_TCIF1 /*!< Transfer Complete flag for Channel 1 */ +#define DMA_FLAG_HT1 DMA_ISR_HTIF1 /*!< Half Transfer flag for Channel 1 */ +#define DMA_FLAG_TE1 DMA_ISR_TEIF1 /*!< Transfer Error flag for Channel 1 */ +#define DMA_FLAG_GI2 DMA_ISR_GIF2 /*!< Global Interrupt flag for Channel 2 */ +#define DMA_FLAG_TC2 DMA_ISR_TCIF2 /*!< Transfer Complete flag for Channel 2 */ +#define DMA_FLAG_HT2 DMA_ISR_HTIF2 /*!< Half Transfer flag for Channel 2 */ +#define DMA_FLAG_TE2 DMA_ISR_TEIF2 /*!< Transfer Error flag for Channel 2 */ +#define DMA_FLAG_GI3 DMA_ISR_GIF3 /*!< Global Interrupt flag for Channel 3 */ +#define DMA_FLAG_TC3 DMA_ISR_TCIF3 /*!< Transfer Complete flag for Channel 3 */ +#define DMA_FLAG_HT3 DMA_ISR_HTIF3 /*!< Half Transfer flag for Channel 3 */ +#define DMA_FLAG_TE3 DMA_ISR_TEIF3 /*!< Transfer Error flag for Channel 3 */ +#define DMA_FLAG_GI4 DMA_ISR_GIF4 /*!< Global Interrupt flag for Channel 4 */ +#define DMA_FLAG_TC4 DMA_ISR_TCIF4 /*!< Transfer Complete flag for Channel 4 */ +#define DMA_FLAG_HT4 DMA_ISR_HTIF4 /*!< Half Transfer flag for Channel 4 */ +#define DMA_FLAG_TE4 DMA_ISR_TEIF4 /*!< Transfer Error flag for Channel 4 */ +#define DMA_FLAG_GI5 DMA_ISR_GIF5 /*!< Global Interrupt flag for Channel 5 */ +#define DMA_FLAG_TC5 DMA_ISR_TCIF5 /*!< Transfer Complete flag for Channel 5 */ +#define DMA_FLAG_HT5 DMA_ISR_HTIF5 /*!< Half Transfer flag for Channel 5 */ +#define DMA_FLAG_TE5 DMA_ISR_TEIF5 /*!< Transfer Error for Channel 5 */ +#if defined(DMA1_Channel6) +#define DMA_FLAG_GI6 DMA_ISR_GIF6 /*!< Global Interrupt flag for Channel 6 */ +#define DMA_FLAG_TC6 DMA_ISR_TCIF6 /*!< Transfer Complete flag for Channel 6 */ +#define DMA_FLAG_HT6 DMA_ISR_HTIF6 /*!< Half Transfer flag for Channel 6 */ +#define DMA_FLAG_TE6 DMA_ISR_TEIF6 /*!< Transfer Error flag for Channel 6 */ +#endif +#if defined(DMA1_Channel7) +#define DMA_FLAG_GI7 DMA_ISR_GIF7 /*!< Global Interrupt flag for Channel 7 */ +#define DMA_FLAG_TC7 DMA_ISR_TCIF7 /*!< Transfer Complete flag for Channel 7 */ +#define DMA_FLAG_HT7 DMA_ISR_HTIF7 /*!< Half Transfer flag for Channel 7 */ +#define DMA_FLAG_TE7 DMA_ISR_TEIF7 /*!< Transfer Error flag for Channel 7 */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) +#else +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) +#endif +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) +#else +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) +#endif +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) +#else +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) +#endif +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\ + DMA_FLAG_GI7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\ + DMA_FLAG_GI7) +#else +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + DMA_FLAG_GI5) +#endif +#endif /* DMA2 */ + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GIx: Global interrupt flag + * Where x can be 1 to max Channel supported by the product to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ +#if defined(DMA2) +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) +#else /* DMA1 */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) +#endif /* DMA2 */ + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GIx: Global interrupt flag + * Where x can be 1 to max Channel supported by the product to select the DMA Channel flag. + * @retval None + */ +#if defined(DMA2) +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) +#else /* DMA1 */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR |= (__FLAG__)) +#endif /* DMA2 */ + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or disabled. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Returns the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__ DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32g0xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < DMA_CNDTR_NDT)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_ALL_REQUEST(REQUEST) ((REQUEST) <= DMA_MAX_REQUEST) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h new file mode 100644 index 0000000..7e5e0ce --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h @@ -0,0 +1,280 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DMA_EX_H +#define STM32G0xx_HAL_DMA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_dmamux.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @{ + */ + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE */ + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + + +} HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + +} HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ + +/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_EXTI0 LL_DMAMUX_SYNC_EXTI_LINE0 /*!< Synchronization signal from EXTI Line0 */ +#define HAL_DMAMUX1_SYNC_EXTI1 LL_DMAMUX_SYNC_EXTI_LINE1 /*!< Synchronization signal from EXTI Line1 */ +#define HAL_DMAMUX1_SYNC_EXTI2 LL_DMAMUX_SYNC_EXTI_LINE2 /*!< Synchronization signal from EXTI Line2 */ +#define HAL_DMAMUX1_SYNC_EXTI3 LL_DMAMUX_SYNC_EXTI_LINE3 /*!< Synchronization signal from EXTI Line3 */ +#define HAL_DMAMUX1_SYNC_EXTI4 LL_DMAMUX_SYNC_EXTI_LINE4 /*!< Synchronization signal from EXTI Line4 */ +#define HAL_DMAMUX1_SYNC_EXTI5 LL_DMAMUX_SYNC_EXTI_LINE5 /*!< Synchronization signal from EXTI Line5 */ +#define HAL_DMAMUX1_SYNC_EXTI6 LL_DMAMUX_SYNC_EXTI_LINE6 /*!< Synchronization signal from EXTI Line6 */ +#define HAL_DMAMUX1_SYNC_EXTI7 LL_DMAMUX_SYNC_EXTI_LINE7 /*!< Synchronization signal from EXTI Line7 */ +#define HAL_DMAMUX1_SYNC_EXTI8 LL_DMAMUX_SYNC_EXTI_LINE8 /*!< Synchronization signal from EXTI Line8 */ +#define HAL_DMAMUX1_SYNC_EXTI9 LL_DMAMUX_SYNC_EXTI_LINE9 /*!< Synchronization signal from EXTI Line9 */ +#define HAL_DMAMUX1_SYNC_EXTI10 LL_DMAMUX_SYNC_EXTI_LINE10 /*!< Synchronization signal from EXTI Line10 */ +#define HAL_DMAMUX1_SYNC_EXTI11 LL_DMAMUX_SYNC_EXTI_LINE11 /*!< Synchronization signal from EXTI Line11 */ +#define HAL_DMAMUX1_SYNC_EXTI12 LL_DMAMUX_SYNC_EXTI_LINE12 /*!< Synchronization signal from EXTI Line12 */ +#define HAL_DMAMUX1_SYNC_EXTI13 LL_DMAMUX_SYNC_EXTI_LINE13 /*!< Synchronization signal from EXTI Line1 3 */ +#define HAL_DMAMUX1_SYNC_EXTI14 LL_DMAMUX_SYNC_EXTI_LINE14 /*!< Synchronization signal from EXTI Line1 4 */ +#define HAL_DMAMUX1_SYNC_EXTI15 LL_DMAMUX_SYNC_EXTI_LINE15 /*!< Synchronization signal from EXTI Line1 5 */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT LL_DMAMUX_SYNC_DMAMUX_CH0 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT LL_DMAMUX_SYNC_DMAMUX_CH1 /*!< Synchronization signal from DMAMUX channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT LL_DMAMUX_SYNC_DMAMUX_CH2 /*!< Synchronization signal from DMAMUX channel2 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT LL_DMAMUX_SYNC_DMAMUX_CH3 /*!< Synchronization signal from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define HAL_DMAMUX1_SYNC_LPTIM1_OUT LL_DMAMUX_SYNC_LPTIM1_OUT /*!< Synchronization signal from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define HAL_DMAMUX1_SYNC_LPTIM2_OUT LL_DMAMUX_SYNC_LPTIM2_OUT /*!< Synchronization signal from LPTIM2 Output */ +#endif +#define HAL_DMAMUX1_SYNC_TIM14_OC LL_DMAMUX_SYNC_TIM14_OC /*!< Synchronization signal from TIM14 OC */ + +#define HAL_DMAMUX1_MAX_SYNC HAL_DMAMUX1_SYNC_TIM14_OC +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT LL_DMAMUX_SYNC_NO_EVENT /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING LL_DMAMUX_SYNC_POL_RISING /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING LL_DMAMUX_SYNC_POL_FALLING /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING LL_DMAMUX_SYNC_POL_RISING_FALLING /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection + * @{ + */ +#define HAL_DMAMUX1_REQ_GEN_EXTI0 LL_DMAMUX_REQ_GEN_EXTI_LINE0 /*!< Request signal generation from EXTI Line0 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI1 LL_DMAMUX_REQ_GEN_EXTI_LINE1 /*!< Request signal generation from EXTI Line1 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI2 LL_DMAMUX_REQ_GEN_EXTI_LINE2 /*!< Request signal generation from EXTI Line2 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI3 LL_DMAMUX_REQ_GEN_EXTI_LINE3 /*!< Request signal generation from EXTI Line3 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI4 LL_DMAMUX_REQ_GEN_EXTI_LINE4 /*!< Request signal generation from EXTI Line4 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI5 LL_DMAMUX_REQ_GEN_EXTI_LINE5 /*!< Request signal generation from EXTI Line5 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI6 LL_DMAMUX_REQ_GEN_EXTI_LINE6 /*!< Request signal generation from EXTI Line6 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI7 LL_DMAMUX_REQ_GEN_EXTI_LINE7 /*!< Request signal generation from EXTI Line7 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI8 LL_DMAMUX_REQ_GEN_EXTI_LINE8 /*!< Request signal generation from EXTI Line8 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI9 LL_DMAMUX_REQ_GEN_EXTI_LINE9 /*!< Request signal generation from EXTI Line9 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI10 LL_DMAMUX_REQ_GEN_EXTI_LINE10 /*!< Request signal generation from EXTI Line10 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI11 LL_DMAMUX_REQ_GEN_EXTI_LINE11 /*!< Request signal generation from EXTI Line11 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI12 LL_DMAMUX_REQ_GEN_EXTI_LINE12 /*!< Request signal generation from EXTI Line12 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI13 LL_DMAMUX_REQ_GEN_EXTI_LINE13 /*!< Request signal generation from EXTI Line13 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI14 LL_DMAMUX_REQ_GEN_EXTI_LINE14 /*!< Request signal generation from EXTI Line14 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI15 LL_DMAMUX_REQ_GEN_EXTI_LINE15 /*!< Request signal generation from EXTI Line15 */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH0 /*!< Request signal generation from DMAMUX channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH1 /*!< Request signal generation from DMAMUX channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH2 /*!< Request signal generation from DMAMUX channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH3 /*!< Request signal generation from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT LL_DMAMUX_REQ_GEN_LPTIM1_OUT /*!< Request signal generation from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT LL_DMAMUX_REQ_GEN_LPTIM2_OUT /*!< Request signal generation from LPTIM2 Output */ +#endif +#define HAL_DMAMUX1_REQ_GEN_TIM14_OC LL_DMAMUX_REQ_GEN_TIM14_OC /*!< Request signal generation from TIM14 OC */ + +#define HAL_DMAMUX1_MAX_REQ_GEN HAL_DMAMUX1_REQ_GEN_TIM14_OC +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT LL_DMAMUX_REQ_GEN_NO_EVENT /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING LL_DMAMUX_REQ_GEN_POL_RISING /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING LL_DMAMUX_REQ_GEN_POL_FALLING /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING LL_DMAMUX_REQ_GEN_POL_RISING_FALLING /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup DMAEx_Exported_Functions_Group1 + * @{ + */ + +/* ------------------------- REQUEST -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +/* -------------------------------------------------------------------------- */ + +/* ------------------------- SYNCHRO -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +/* -------------------------------------------------------------------------- */ + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMAEx Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_SYNC_EXTI0) || \ + (((SIGNAL_ID) >= HAL_DMAMUX1_SYNC_EXTI1) && \ + ((SIGNAL_ID) <= HAL_DMAMUX1_MAX_SYNC))) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_REQ_GEN_EXTI0) || \ + (((SIGNAL_ID) >= HAL_DMAMUX1_REQ_GEN_EXTI1) && \ + ((SIGNAL_ID) <= HAL_DMAMUX1_MAX_REQ_GEN))) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT)|| \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DMA_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h new file mode 100644 index 0000000..dbf24f5 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h @@ -0,0 +1,389 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_EXTI_H +#define STM32G0xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, + HAL_EXTI_RISING_CB_ID = 0x01U, + HAL_EXTI_FALLING_CB_ID = 0x02U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* RisingCallback)(void); /*!< Exti rising callback */ + void (* FallingCallback)(void); /*!< Exti falling callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | 0x10u) +#if defined(COMP1) +#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_REG1 | 0x11u) +#else +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#endif +#if defined(COMP2) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | 0x12u) +#else +#define EXTI_LINE_18 (EXTI_RESERVED | EXTI_REG1 | 0x12u) +#endif +#define EXTI_LINE_19 (EXTI_DIRECT | EXTI_REG1 | 0x13u) +#if defined(COMP3) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | 0x14u) +#else +#define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14u) +#endif +#define EXTI_LINE_21 (EXTI_DIRECT | EXTI_REG1 | 0x15u) +#if defined(RCC_CCIPR_I2C2SEL) +#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_REG1 | 0x16u) +#else +#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u) +#endif +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | 0x17u) +#if defined(RCC_CCIPR_USART3SEL) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | 0x18u) +#else +#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u) +#endif +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19u) +#if defined(RCC_CCIPR_USART2SEL) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | 0x1Au) +#else +#define EXTI_LINE_26 (EXTI_RESERVED | EXTI_REG1 | 0x1Au) +#endif +#if defined(CEC) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | 0x1Bu) +#else +#define EXTI_LINE_27 (EXTI_RESERVED | EXTI_REG1 | 0x1Bu) +#endif +#if defined(LPUART1) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | 0x1Cu) +#else +#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu) +#endif +#if defined(LPTIM1) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | 0x1Du) +#else +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#endif +#if defined(LPTIM2) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | 0x1Eu) +#else +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#endif +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | 0x1Fu) +#if defined(UCPD1) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | 0x00u) +#else +#define EXTI_LINE_32 (EXTI_RESERVED | EXTI_REG2 | 0x00u) +#endif +#if defined(UCPD2) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | 0x01u) +#else +#define EXTI_LINE_33 (EXTI_RESERVED | EXTI_REG2 | 0x01u) +#endif +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | 0x02u) +#else +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#endif +#if defined(LPUART2) +#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_REG2 | 0x03u) +#else +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#endif +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_REG2 | 0x04u) +#endif +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#define EXTI_GPIOD 0x00000003u +#if defined(GPIOE) +#define EXTI_GPIOE 0x00000004u +#endif +#define EXTI_GPIOF 0x00000005u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16u +#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2) +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define EXTI_LINE_NB 37uL +#elif defined(STM32G0B0xx) +#define EXTI_LINE_NB 37uL +#elif defined(STM32G081xx) || defined(STM32G071xx) +#define EXTI_LINE_NB 34uL +#elif defined(STM32G070xx) +#define EXTI_LINE_NB 34uL +#elif defined(STM32G041xx) || defined(STM32G031xx) +#define EXTI_LINE_NB 32uL +#else +#define EXTI_LINE_NB 32uL +#endif + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u)))) + +#define IS_EXTI_MODE(__MODE__) ((((__MODE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__MODE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \ + ((__EXTI_LINE__) == EXTI_TRIGGER_FALLING)) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined(GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOF)) +#endif + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_EXTI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h new file mode 100644 index 0000000..24c12f8 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_fdcan.h @@ -0,0 +1,1438 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_fdcan.h + * @author MCD Application Team + * @brief Header file of FDCAN HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FDCAN_H +#define STM32G0xx_HAL_FDCAN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined(FDCAN1) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FDCAN + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Types FDCAN Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_FDCAN_STATE_RESET = 0x00U, /*!< FDCAN not yet initialized or disabled */ + HAL_FDCAN_STATE_READY = 0x01U, /*!< FDCAN initialized and ready for use */ + HAL_FDCAN_STATE_BUSY = 0x02U, /*!< FDCAN process is ongoing */ + HAL_FDCAN_STATE_ERROR = 0x03U /*!< FDCAN error state */ +} HAL_FDCAN_StateTypeDef; + +/** + * @brief FDCAN Init structure definition + */ +typedef struct +{ + uint32_t ClockDivider; /*!< Specifies the FDCAN kernel clock divider. + The clock is common to all FDCAN instances. + This parameter is applied only at initialisation of + first FDCAN instance. + This parameter can be a value of @ref FDCAN_clock_divider. */ + + uint32_t FrameFormat; /*!< Specifies the FDCAN frame format. + This parameter can be a value of @ref FDCAN_frame_format */ + + uint32_t Mode; /*!< Specifies the FDCAN mode. + This parameter can be a value of @ref FDCAN_operating_mode */ + + FunctionalState AutoRetransmission; /*!< Enable or disable the automatic retransmission mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState TransmitPause; /*!< Enable or disable the Transmit Pause feature. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ProtocolException; /*!< Enable or disable the Protocol Exception Handling. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t NominalPrescaler; /*!< Specifies the value by which the oscillator frequency is + divided for generating the nominal bit time quanta. + This parameter must be a number between 1 and 512 */ + + uint32_t NominalSyncJumpWidth; /*!< Specifies the maximum number of time quanta the FDCAN + hardware is allowed to lengthen or shorten a bit to perform + resynchronization. + This parameter must be a number between 1 and 128 */ + + uint32_t NominalTimeSeg1; /*!< Specifies the number of time quanta in Bit Segment 1. + This parameter must be a number between 2 and 256 */ + + uint32_t NominalTimeSeg2; /*!< Specifies the number of time quanta in Bit Segment 2. + This parameter must be a number between 2 and 128 */ + + uint32_t DataPrescaler; /*!< Specifies the value by which the oscillator frequency is + divided for generating the data bit time quanta. + This parameter must be a number between 1 and 32 */ + + uint32_t DataSyncJumpWidth; /*!< Specifies the maximum number of time quanta the FDCAN + hardware is allowed to lengthen or shorten a data bit to + perform resynchronization. + This parameter must be a number between 1 and 16 */ + + uint32_t DataTimeSeg1; /*!< Specifies the number of time quanta in Data Bit Segment 1. + This parameter must be a number between 1 and 32 */ + + uint32_t DataTimeSeg2; /*!< Specifies the number of time quanta in Data Bit Segment 2. + This parameter must be a number between 1 and 16 */ + + uint32_t StdFiltersNbr; /*!< Specifies the number of standard Message ID filters. + This parameter must be a number between 0 and 28 */ + + uint32_t ExtFiltersNbr; /*!< Specifies the number of extended Message ID filters. + This parameter must be a number between 0 and 8 */ + + uint32_t TxFifoQueueMode; /*!< Tx FIFO/Queue Mode selection. + This parameter can be a value of @ref FDCAN_txFifoQueue_Mode */ + +} FDCAN_InitTypeDef; + +/** + * @brief FDCAN filter structure definition + */ +typedef struct +{ + uint32_t IdType; /*!< Specifies the identifier type. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t FilterIndex; /*!< Specifies the filter which will be initialized. + This parameter must be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if IdType is FDCAN_STANDARD_ID + - 0 and (SRAMCAN_FLE_NBR-1), if IdType is FDCAN_EXTENDED_ID */ + + uint32_t FilterType; /*!< Specifies the filter type. + This parameter can be a value of @ref FDCAN_filter_type. + The value FDCAN_FILTER_RANGE_NO_EIDM is permitted + only when IdType is FDCAN_EXTENDED_ID. */ + + uint32_t FilterConfig; /*!< Specifies the filter configuration. + This parameter can be a value of @ref FDCAN_filter_config */ + + uint32_t FilterID1; /*!< Specifies the filter identification 1. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t FilterID2; /*!< Specifies the filter identification 2. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + +} FDCAN_FilterTypeDef; + +/** + * @brief FDCAN Tx header structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type for the message that will be + transmitted. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t TxFrameType; /*!< Specifies the frame type of the message that will be transmitted. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the length of the frame that will be transmitted. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Tx frame will be transmitted with or without + bit rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Tx frame will be transmitted in classic or + FD format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t TxEventFifoControl; /*!< Specifies the event FIFO control. + This parameter can be a value of @ref FDCAN_EFC */ + + uint32_t MessageMarker; /*!< Specifies the message marker to be copied into Tx Event FIFO + element for identification of Tx message status. + This parameter must be a number between 0 and 0xFF */ + +} FDCAN_TxHeaderTypeDef; + +/** + * @brief FDCAN Rx header structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type of the received message. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t RxFrameType; /*!< Specifies the the received message frame type. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the received frame length. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Rx frame is received with or without bit + rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Rx frame is received in classic or FD + format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t RxTimestamp; /*!< Specifies the timestamp counter value captured on start of frame + reception. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FilterIndex; /*!< Specifies the index of matching Rx acceptance filter element. + This parameter must be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if IdType is FDCAN_STANDARD_ID + - 0 and (SRAMCAN_FLE_NBR-1), if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IsFilterMatchingFrame; /*!< Specifies whether the accepted frame did not match any Rx filter. + Acceptance of non-matching frames may be enabled via + HAL_FDCAN_ConfigGlobalFilter(). + This parameter can be 0 or 1 */ + +} FDCAN_RxHeaderTypeDef; + +/** + * @brief FDCAN Tx event FIFO structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type for the transmitted message. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t TxFrameType; /*!< Specifies the frame type of the transmitted message. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the length of the transmitted frame. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Tx frame is transmitted with or without bit + rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Tx frame is transmitted in classic or FD + format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t TxTimestamp; /*!< Specifies the timestamp counter value captured on start of frame + transmission. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t MessageMarker; /*!< Specifies the message marker copied into Tx Event FIFO element + for identification of Tx message status. + This parameter must be a number between 0 and 0xFF */ + + uint32_t EventType; /*!< Specifies the event type. + This parameter can be a value of @ref FDCAN_event_type */ + +} FDCAN_TxEventFifoTypeDef; + +/** + * @brief FDCAN High Priority Message Status structure definition + */ +typedef struct +{ + uint32_t FilterList; /*!< Specifies the filter list of the matching filter element. + This parameter can be: + - 0 : Standard Filter List + - 1 : Extended Filter List */ + + uint32_t FilterIndex; /*!< Specifies the index of matching filter element. + This parameter can be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if FilterList is 0 (Standard) + - 0 and (SRAMCAN_FLE_NBR-1), if FilterList is 1 (Extended) */ + + uint32_t MessageStorage; /*!< Specifies the HP Message Storage. + This parameter can be a value of @ref FDCAN_hp_msg_storage */ + + uint32_t MessageIndex; /*!< Specifies the Index of Rx FIFO element to which the + message was stored. + This parameter is valid only when MessageStorage is: + FDCAN_HP_STORAGE_RXFIFO0 + or + FDCAN_HP_STORAGE_RXFIFO1 */ + +} FDCAN_HpMsgStatusTypeDef; + +/** + * @brief FDCAN Protocol Status structure definition + */ +typedef struct +{ + uint32_t LastErrorCode; /*!< Specifies the type of the last error that occurred on the FDCAN bus. + This parameter can be a value of @ref FDCAN_protocol_error_code */ + + uint32_t DataLastErrorCode; /*!< Specifies the type of the last error that occurred in the data phase of a CAN FD format + frame with its BRS flag set. + This parameter can be a value of @ref FDCAN_protocol_error_code */ + + uint32_t Activity; /*!< Specifies the FDCAN module communication state. + This parameter can be a value of @ref FDCAN_communication_state */ + + uint32_t ErrorPassive; /*!< Specifies the FDCAN module error status. + This parameter can be: + - 0 : The FDCAN is in Error_Active state + - 1 : The FDCAN is in Error_Passive state */ + + uint32_t Warning; /*!< Specifies the FDCAN module warning status. + This parameter can be: + - 0 : error counters (RxErrorCnt and TxErrorCnt) are below the Error_Warning limit of 96 + - 1 : at least one of error counters has reached the Error_Warning limit of 96 */ + + uint32_t BusOff; /*!< Specifies the FDCAN module Bus_Off status. + This parameter can be: + - 0 : The FDCAN is not in Bus_Off state + - 1 : The FDCAN is in Bus_Off state */ + + uint32_t RxESIflag; /*!< Specifies ESI flag of last received CAN FD message. + This parameter can be: + - 0 : Last received CAN FD message did not have its ESI flag set + - 1 : Last received CAN FD message had its ESI flag set */ + + uint32_t RxBRSflag; /*!< Specifies BRS flag of last received CAN FD message. + This parameter can be: + - 0 : Last received CAN FD message did not have its BRS flag set + - 1 : Last received CAN FD message had its BRS flag set */ + + uint32_t RxFDFflag; /*!< Specifies if CAN FD message (FDF flag set) has been received since last protocol status + This parameter can be: + - 0 : No CAN FD message received + - 1 : CAN FD message received */ + + uint32_t ProtocolException; /*!< Specifies the FDCAN module Protocol Exception status. + This parameter can be: + - 0 : No protocol exception event occurred since last read access + - 1 : Protocol exception event occurred */ + + uint32_t TDCvalue; /*!< Specifies the Transmitter Delay Compensation Value. + This parameter can be a number between 0 and 127 */ + +} FDCAN_ProtocolStatusTypeDef; + +/** + * @brief FDCAN Error Counters structure definition + */ +typedef struct +{ + uint32_t TxErrorCnt; /*!< Specifies the Transmit Error Counter Value. + This parameter can be a number between 0 and 255 */ + + uint32_t RxErrorCnt; /*!< Specifies the Receive Error Counter Value. + This parameter can be a number between 0 and 127 */ + + uint32_t RxErrorPassive; /*!< Specifies the Receive Error Passive status. + This parameter can be: + - 0 : The Receive Error Counter (RxErrorCnt) is below the error passive level of 128 + - 1 : The Receive Error Counter (RxErrorCnt) has reached the error passive level of 128 */ + + uint32_t ErrorLogging; /*!< Specifies the Transmit/Receive error logging counter value. + This parameter can be a number between 0 and 255. + This counter is incremented each time when a FDCAN protocol error causes the TxErrorCnt + or the RxErrorCnt to be incremented. The counter stops at 255; the next increment of + TxErrorCnt or RxErrorCnt sets interrupt flag FDCAN_FLAG_ERROR_LOGGING_OVERFLOW */ + +} FDCAN_ErrorCountersTypeDef; + +/** + * @brief FDCAN Message RAM blocks + */ +typedef struct +{ + uint32_t StandardFilterSA; /*!< Specifies the Standard Filter List Start Address. + This parameter must be a 32-bit word address */ + + uint32_t ExtendedFilterSA; /*!< Specifies the Extended Filter List Start Address. + This parameter must be a 32-bit word address */ + + uint32_t RxFIFO0SA; /*!< Specifies the Rx FIFO 0 Start Address. + This parameter must be a 32-bit word address */ + + uint32_t RxFIFO1SA; /*!< Specifies the Rx FIFO 1 Start Address. + This parameter must be a 32-bit word address */ + + uint32_t TxEventFIFOSA; /*!< Specifies the Tx Event FIFO Start Address. + This parameter must be a 32-bit word address */ + + uint32_t TxFIFOQSA; /*!< Specifies the Tx FIFO/Queue Start Address. + This parameter must be a 32-bit word address */ + +} FDCAN_MsgRamAddressTypeDef; + +/** + * @brief FDCAN handle structure definition + */ +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +typedef struct __FDCAN_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +{ + FDCAN_GlobalTypeDef *Instance; /*!< Register base address */ + + FDCAN_InitTypeDef Init; /*!< FDCAN required parameters */ + + FDCAN_MsgRamAddressTypeDef msgRam; /*!< FDCAN Message RAM blocks */ + + uint32_t LatestTxFifoQRequest; /*!< FDCAN Tx buffer index + of latest Tx FIFO/Queue request */ + + __IO HAL_FDCAN_StateTypeDef State; /*!< FDCAN communication state */ + + HAL_LockTypeDef Lock; /*!< FDCAN locking object */ + + __IO uint32_t ErrorCode; /*!< FDCAN Error code */ + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + void (* TxEventFifoCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); /*!< FDCAN Tx Event Fifo callback */ + void (* RxFifo0Callback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); /*!< FDCAN Rx Fifo 0 callback */ + void (* RxFifo1Callback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); /*!< FDCAN Rx Fifo 1 callback */ + void (* TxFifoEmptyCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Tx Fifo Empty callback */ + void (* TxBufferCompleteCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< FDCAN Tx Buffer complete callback */ + void (* TxBufferAbortCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< FDCAN Tx Buffer abort callback */ + void (* HighPriorityMessageCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN High priority message callback */ + void (* TimestampWraparoundCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Timestamp wraparound callback */ + void (* TimeoutOccurredCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Timeout occurred callback */ + void (* ErrorCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Error callback */ + void (* ErrorStatusCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); /*!< FDCAN Error status callback */ + + void (* MspInitCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Msp Init callback */ + void (* MspDeInitCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Msp DeInit callback */ + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +} FDCAN_HandleTypeDef; + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/** + * @brief HAL FDCAN common Callback ID enumeration definition + */ +typedef enum +{ + HAL_FDCAN_TX_FIFO_EMPTY_CB_ID = 0x00U, /*!< FDCAN Tx Fifo Empty callback ID */ + HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID = 0x01U, /*!< FDCAN High priority message callback ID */ + HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID = 0x02U, /*!< FDCAN Timestamp wraparound callback ID */ + HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID = 0x03U, /*!< FDCAN Timeout occurred callback ID */ + HAL_FDCAN_ERROR_CALLBACK_CB_ID = 0x04U, /*!< FDCAN Error callback ID */ + + HAL_FDCAN_MSPINIT_CB_ID = 0x05U, /*!< FDCAN MspInit callback ID */ + HAL_FDCAN_MSPDEINIT_CB_ID = 0x06U, /*!< FDCAN MspDeInit callback ID */ + +} HAL_FDCAN_CallbackIDTypeDef; + +/** + * @brief HAL FDCAN Callback pointer definition + */ +typedef void (*pFDCAN_CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan); /*!< pointer to a common FDCAN callback function */ +typedef void (*pFDCAN_TxEventFifoCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); /*!< pointer to Tx event Fifo FDCAN callback function */ +typedef void (*pFDCAN_RxFifo0CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); /*!< pointer to Rx Fifo 0 FDCAN callback function */ +typedef void (*pFDCAN_RxFifo1CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); /*!< pointer to Rx Fifo 1 FDCAN callback function */ +typedef void (*pFDCAN_TxBufferCompleteCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< pointer to Tx Buffer complete FDCAN callback function */ +typedef void (*pFDCAN_TxBufferAbortCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< pointer to Tx Buffer abort FDCAN callback function */ +typedef void (*pFDCAN_ErrorStatusCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); /*!< pointer to Error Status callback function */ + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Constants FDCAN Exported Constants + * @{ + */ + +/** @defgroup HAL_FDCAN_Error_Code HAL FDCAN Error Code + * @{ + */ +#define HAL_FDCAN_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_FDCAN_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */ +#define HAL_FDCAN_ERROR_NOT_INITIALIZED ((uint32_t)0x00000002U) /*!< Peripheral not initialized */ +#define HAL_FDCAN_ERROR_NOT_READY ((uint32_t)0x00000004U) /*!< Peripheral not ready */ +#define HAL_FDCAN_ERROR_NOT_STARTED ((uint32_t)0x00000008U) /*!< Peripheral not started */ +#define HAL_FDCAN_ERROR_NOT_SUPPORTED ((uint32_t)0x00000010U) /*!< Mode not supported */ +#define HAL_FDCAN_ERROR_PARAM ((uint32_t)0x00000020U) /*!< Parameter error */ +#define HAL_FDCAN_ERROR_PENDING ((uint32_t)0x00000040U) /*!< Pending operation */ +#define HAL_FDCAN_ERROR_RAM_ACCESS ((uint32_t)0x00000080U) /*!< Message RAM Access Failure */ +#define HAL_FDCAN_ERROR_FIFO_EMPTY ((uint32_t)0x00000100U) /*!< Put element in full FIFO */ +#define HAL_FDCAN_ERROR_FIFO_FULL ((uint32_t)0x00000200U) /*!< Get element from empty FIFO */ +#define HAL_FDCAN_ERROR_LOG_OVERFLOW FDCAN_IR_ELO /*!< Overflow of CAN Error Logging Counter */ +#define HAL_FDCAN_ERROR_RAM_WDG FDCAN_IR_WDI /*!< Message RAM Watchdog event occurred */ +#define HAL_FDCAN_ERROR_PROTOCOL_ARBT FDCAN_IR_PEA /*!< Protocol Error in Arbitration Phase (Nominal Bit Time is used) */ +#define HAL_FDCAN_ERROR_PROTOCOL_DATA FDCAN_IR_PED /*!< Protocol Error in Data Phase (Data Bit Time is used) */ +#define HAL_FDCAN_ERROR_RESERVED_AREA FDCAN_IR_ARA /*!< Access to Reserved Address */ + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +#define HAL_FDCAN_ERROR_INVALID_CALLBACK ((uint32_t)0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup FDCAN_frame_format FDCAN Frame Format + * @{ + */ +#define FDCAN_FRAME_CLASSIC ((uint32_t)0x00000000U) /*!< Classic mode */ +#define FDCAN_FRAME_FD_NO_BRS ((uint32_t)FDCAN_CCCR_FDOE) /*!< FD mode without BitRate Switching */ +#define FDCAN_FRAME_FD_BRS ((uint32_t)(FDCAN_CCCR_FDOE | FDCAN_CCCR_BRSE)) /*!< FD mode with BitRate Switching */ +/** + * @} + */ + +/** @defgroup FDCAN_operating_mode FDCAN Operating Mode + * @{ + */ +#define FDCAN_MODE_NORMAL ((uint32_t)0x00000000U) /*!< Normal mode */ +#define FDCAN_MODE_RESTRICTED_OPERATION ((uint32_t)0x00000001U) /*!< Restricted Operation mode */ +#define FDCAN_MODE_BUS_MONITORING ((uint32_t)0x00000002U) /*!< Bus Monitoring mode */ +#define FDCAN_MODE_INTERNAL_LOOPBACK ((uint32_t)0x00000003U) /*!< Internal LoopBack mode */ +#define FDCAN_MODE_EXTERNAL_LOOPBACK ((uint32_t)0x00000004U) /*!< External LoopBack mode */ +/** + * @} + */ + +/** @defgroup FDCAN_clock_divider FDCAN Clock Divider + * @{ + */ +#define FDCAN_CLOCK_DIV1 ((uint32_t)0x00000000U) /*!< Divide kernel clock by 1 */ +#define FDCAN_CLOCK_DIV2 ((uint32_t)0x00000001U) /*!< Divide kernel clock by 2 */ +#define FDCAN_CLOCK_DIV4 ((uint32_t)0x00000002U) /*!< Divide kernel clock by 4 */ +#define FDCAN_CLOCK_DIV6 ((uint32_t)0x00000003U) /*!< Divide kernel clock by 6 */ +#define FDCAN_CLOCK_DIV8 ((uint32_t)0x00000004U) /*!< Divide kernel clock by 8 */ +#define FDCAN_CLOCK_DIV10 ((uint32_t)0x00000005U) /*!< Divide kernel clock by 10 */ +#define FDCAN_CLOCK_DIV12 ((uint32_t)0x00000006U) /*!< Divide kernel clock by 12 */ +#define FDCAN_CLOCK_DIV14 ((uint32_t)0x00000007U) /*!< Divide kernel clock by 14 */ +#define FDCAN_CLOCK_DIV16 ((uint32_t)0x00000008U) /*!< Divide kernel clock by 16 */ +#define FDCAN_CLOCK_DIV18 ((uint32_t)0x00000009U) /*!< Divide kernel clock by 18 */ +#define FDCAN_CLOCK_DIV20 ((uint32_t)0x0000000AU) /*!< Divide kernel clock by 20 */ +#define FDCAN_CLOCK_DIV22 ((uint32_t)0x0000000BU) /*!< Divide kernel clock by 22 */ +#define FDCAN_CLOCK_DIV24 ((uint32_t)0x0000000CU) /*!< Divide kernel clock by 24 */ +#define FDCAN_CLOCK_DIV26 ((uint32_t)0x0000000DU) /*!< Divide kernel clock by 26 */ +#define FDCAN_CLOCK_DIV28 ((uint32_t)0x0000000EU) /*!< Divide kernel clock by 28 */ +#define FDCAN_CLOCK_DIV30 ((uint32_t)0x0000000FU) /*!< Divide kernel clock by 30 */ +/** + * @} + */ + +/** @defgroup FDCAN_txFifoQueue_Mode FDCAN Tx FIFO/Queue Mode + * @{ + */ +#define FDCAN_TX_FIFO_OPERATION ((uint32_t)0x00000000U) /*!< FIFO mode */ +#define FDCAN_TX_QUEUE_OPERATION ((uint32_t)FDCAN_TXBC_TFQM) /*!< Queue mode */ +/** + * @} + */ + +/** @defgroup FDCAN_id_type FDCAN ID Type + * @{ + */ +#define FDCAN_STANDARD_ID ((uint32_t)0x00000000U) /*!< Standard ID element */ +#define FDCAN_EXTENDED_ID ((uint32_t)0x40000000U) /*!< Extended ID element */ +/** + * @} + */ + +/** @defgroup FDCAN_frame_type FDCAN Frame Type + * @{ + */ +#define FDCAN_DATA_FRAME ((uint32_t)0x00000000U) /*!< Data frame */ +#define FDCAN_REMOTE_FRAME ((uint32_t)0x20000000U) /*!< Remote frame */ +/** + * @} + */ + +/** @defgroup FDCAN_data_length_code FDCAN Data Length Code + * @{ + */ +#define FDCAN_DLC_BYTES_0 ((uint32_t)0x00000000U) /*!< 0 bytes data field */ +#define FDCAN_DLC_BYTES_1 ((uint32_t)0x00010000U) /*!< 1 bytes data field */ +#define FDCAN_DLC_BYTES_2 ((uint32_t)0x00020000U) /*!< 2 bytes data field */ +#define FDCAN_DLC_BYTES_3 ((uint32_t)0x00030000U) /*!< 3 bytes data field */ +#define FDCAN_DLC_BYTES_4 ((uint32_t)0x00040000U) /*!< 4 bytes data field */ +#define FDCAN_DLC_BYTES_5 ((uint32_t)0x00050000U) /*!< 5 bytes data field */ +#define FDCAN_DLC_BYTES_6 ((uint32_t)0x00060000U) /*!< 6 bytes data field */ +#define FDCAN_DLC_BYTES_7 ((uint32_t)0x00070000U) /*!< 7 bytes data field */ +#define FDCAN_DLC_BYTES_8 ((uint32_t)0x00080000U) /*!< 8 bytes data field */ +#define FDCAN_DLC_BYTES_12 ((uint32_t)0x00090000U) /*!< 12 bytes data field */ +#define FDCAN_DLC_BYTES_16 ((uint32_t)0x000A0000U) /*!< 16 bytes data field */ +#define FDCAN_DLC_BYTES_20 ((uint32_t)0x000B0000U) /*!< 20 bytes data field */ +#define FDCAN_DLC_BYTES_24 ((uint32_t)0x000C0000U) /*!< 24 bytes data field */ +#define FDCAN_DLC_BYTES_32 ((uint32_t)0x000D0000U) /*!< 32 bytes data field */ +#define FDCAN_DLC_BYTES_48 ((uint32_t)0x000E0000U) /*!< 48 bytes data field */ +#define FDCAN_DLC_BYTES_64 ((uint32_t)0x000F0000U) /*!< 64 bytes data field */ +/** + * @} + */ + +/** @defgroup FDCAN_error_state_indicator FDCAN Error State Indicator + * @{ + */ +#define FDCAN_ESI_ACTIVE ((uint32_t)0x00000000U) /*!< Transmitting node is error active */ +#define FDCAN_ESI_PASSIVE ((uint32_t)0x80000000U) /*!< Transmitting node is error passive */ +/** + * @} + */ + +/** @defgroup FDCAN_bit_rate_switching FDCAN Bit Rate Switching + * @{ + */ +#define FDCAN_BRS_OFF ((uint32_t)0x00000000U) /*!< FDCAN frames transmitted/received without bit rate switching */ +#define FDCAN_BRS_ON ((uint32_t)0x00100000U) /*!< FDCAN frames transmitted/received with bit rate switching */ +/** + * @} + */ + +/** @defgroup FDCAN_format FDCAN format + * @{ + */ +#define FDCAN_CLASSIC_CAN ((uint32_t)0x00000000U) /*!< Frame transmitted/received in Classic CAN format */ +#define FDCAN_FD_CAN ((uint32_t)0x00200000U) /*!< Frame transmitted/received in FDCAN format */ +/** + * @} + */ + +/** @defgroup FDCAN_EFC FDCAN Event FIFO control + * @{ + */ +#define FDCAN_NO_TX_EVENTS ((uint32_t)0x00000000U) /*!< Do not store Tx events */ +#define FDCAN_STORE_TX_EVENTS ((uint32_t)0x00800000U) /*!< Store Tx events */ +/** + * @} + */ + +/** @defgroup FDCAN_filter_type FDCAN Filter Type + * @{ + */ +#define FDCAN_FILTER_RANGE ((uint32_t)0x00000000U) /*!< Range filter from FilterID1 to FilterID2 */ +#define FDCAN_FILTER_DUAL ((uint32_t)0x00000001U) /*!< Dual ID filter for FilterID1 or FilterID2 */ +#define FDCAN_FILTER_MASK ((uint32_t)0x00000002U) /*!< Classic filter: FilterID1 = filter, FilterID2 = mask */ +#define FDCAN_FILTER_RANGE_NO_EIDM ((uint32_t)0x00000003U) /*!< Range filter from FilterID1 to FilterID2, EIDM mask not applied */ +/** + * @} + */ + +/** @defgroup FDCAN_filter_config FDCAN Filter Configuration + * @{ + */ +#define FDCAN_FILTER_DISABLE ((uint32_t)0x00000000U) /*!< Disable filter element */ +#define FDCAN_FILTER_TO_RXFIFO0 ((uint32_t)0x00000001U) /*!< Store in Rx FIFO 0 if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO1 ((uint32_t)0x00000002U) /*!< Store in Rx FIFO 1 if filter matches */ +#define FDCAN_FILTER_REJECT ((uint32_t)0x00000003U) /*!< Reject ID if filter matches */ +#define FDCAN_FILTER_HP ((uint32_t)0x00000004U) /*!< Set high priority if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO0_HP ((uint32_t)0x00000005U) /*!< Set high priority and store in FIFO 0 if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO1_HP ((uint32_t)0x00000006U) /*!< Set high priority and store in FIFO 1 if filter matches */ +/** + * @} + */ + +/** @defgroup FDCAN_Tx_location FDCAN Tx Location + * @{ + */ +#define FDCAN_TX_BUFFER0 ((uint32_t)0x00000001U) /*!< Add message to Tx Buffer 0 */ +#define FDCAN_TX_BUFFER1 ((uint32_t)0x00000002U) /*!< Add message to Tx Buffer 1 */ +#define FDCAN_TX_BUFFER2 ((uint32_t)0x00000004U) /*!< Add message to Tx Buffer 2 */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_location FDCAN Rx Location + * @{ + */ +#define FDCAN_RX_FIFO0 ((uint32_t)0x00000040U) /*!< Get received message from Rx FIFO 0 */ +#define FDCAN_RX_FIFO1 ((uint32_t)0x00000041U) /*!< Get received message from Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_event_type FDCAN Event Type + * @{ + */ +#define FDCAN_TX_EVENT ((uint32_t)0x00400000U) /*!< Tx event */ +#define FDCAN_TX_IN_SPITE_OF_ABORT ((uint32_t)0x00800000U) /*!< Transmission in spite of cancellation */ +/** + * @} + */ + +/** @defgroup FDCAN_hp_msg_storage FDCAN High Priority Message Storage + * @{ + */ +#define FDCAN_HP_STORAGE_NO_FIFO ((uint32_t)0x00000000U) /*!< No FIFO selected */ +#define FDCAN_HP_STORAGE_MSG_LOST ((uint32_t)0x00000040U) /*!< FIFO message lost */ +#define FDCAN_HP_STORAGE_RXFIFO0 ((uint32_t)0x00000080U) /*!< Message stored in FIFO 0 */ +#define FDCAN_HP_STORAGE_RXFIFO1 ((uint32_t)0x000000C0U) /*!< Message stored in FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_protocol_error_code FDCAN protocol error code + * @{ + */ +#define FDCAN_PROTOCOL_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error occurred */ +#define FDCAN_PROTOCOL_ERROR_STUFF ((uint32_t)0x00000001U) /*!< Stuff error */ +#define FDCAN_PROTOCOL_ERROR_FORM ((uint32_t)0x00000002U) /*!< Form error */ +#define FDCAN_PROTOCOL_ERROR_ACK ((uint32_t)0x00000003U) /*!< Acknowledge error */ +#define FDCAN_PROTOCOL_ERROR_BIT1 ((uint32_t)0x00000004U) /*!< Bit 1 (recessive) error */ +#define FDCAN_PROTOCOL_ERROR_BIT0 ((uint32_t)0x00000005U) /*!< Bit 0 (dominant) error */ +#define FDCAN_PROTOCOL_ERROR_CRC ((uint32_t)0x00000006U) /*!< CRC check sum error */ +#define FDCAN_PROTOCOL_ERROR_NO_CHANGE ((uint32_t)0x00000007U) /*!< No change since last read */ +/** + * @} + */ + +/** @defgroup FDCAN_communication_state FDCAN communication state + * @{ + */ +#define FDCAN_COM_STATE_SYNC ((uint32_t)0x00000000U) /*!< Node is synchronizing on CAN communication */ +#define FDCAN_COM_STATE_IDLE ((uint32_t)0x00000008U) /*!< Node is neither receiver nor transmitter */ +#define FDCAN_COM_STATE_RX ((uint32_t)0x00000010U) /*!< Node is operating as receiver */ +#define FDCAN_COM_STATE_TX ((uint32_t)0x00000018U) /*!< Node is operating as transmitter */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_FIFO_operation_mode FDCAN FIFO operation mode + * @{ + */ +#define FDCAN_RX_FIFO_BLOCKING ((uint32_t)0x00000000U) /*!< Rx FIFO blocking mode */ +#define FDCAN_RX_FIFO_OVERWRITE ((uint32_t)0x00000001U) /*!< Rx FIFO overwrite mode */ +/** + * @} + */ + +/** @defgroup FDCAN_Non_Matching_Frames FDCAN non-matching frames + * @{ + */ +#define FDCAN_ACCEPT_IN_RX_FIFO0 ((uint32_t)0x00000000U) /*!< Accept in Rx FIFO 0 */ +#define FDCAN_ACCEPT_IN_RX_FIFO1 ((uint32_t)0x00000001U) /*!< Accept in Rx FIFO 1 */ +#define FDCAN_REJECT ((uint32_t)0x00000002U) /*!< Reject */ +/** + * @} + */ + +/** @defgroup FDCAN_Reject_Remote_Frames FDCAN reject remote frames + * @{ + */ +#define FDCAN_FILTER_REMOTE ((uint32_t)0x00000000U) /*!< Filter remote frames */ +#define FDCAN_REJECT_REMOTE ((uint32_t)0x00000001U) /*!< Reject all remote frames */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupt_Line FDCAN interrupt line + * @{ + */ +#define FDCAN_INTERRUPT_LINE0 ((uint32_t)0x00000001U) /*!< Interrupt Line 0 */ +#define FDCAN_INTERRUPT_LINE1 ((uint32_t)0x00000002U) /*!< Interrupt Line 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_Timestamp FDCAN timestamp + * @{ + */ +#define FDCAN_TIMESTAMP_INTERNAL ((uint32_t)0x00000001U) /*!< Timestamp counter value incremented according to TCP */ +#define FDCAN_TIMESTAMP_EXTERNAL ((uint32_t)0x00000002U) /*!< External timestamp counter value used */ +/** + * @} + */ + +/** @defgroup FDCAN_Timestamp_Prescaler FDCAN timestamp prescaler + * @{ + */ +#define FDCAN_TIMESTAMP_PRESC_1 ((uint32_t)0x00000000U) /*!< Timestamp counter time unit in equal to CAN bit time */ +#define FDCAN_TIMESTAMP_PRESC_2 ((uint32_t)0x00010000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 2 */ +#define FDCAN_TIMESTAMP_PRESC_3 ((uint32_t)0x00020000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 3 */ +#define FDCAN_TIMESTAMP_PRESC_4 ((uint32_t)0x00030000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 4 */ +#define FDCAN_TIMESTAMP_PRESC_5 ((uint32_t)0x00040000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 5 */ +#define FDCAN_TIMESTAMP_PRESC_6 ((uint32_t)0x00050000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 6 */ +#define FDCAN_TIMESTAMP_PRESC_7 ((uint32_t)0x00060000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 7 */ +#define FDCAN_TIMESTAMP_PRESC_8 ((uint32_t)0x00070000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 8 */ +#define FDCAN_TIMESTAMP_PRESC_9 ((uint32_t)0x00080000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 9 */ +#define FDCAN_TIMESTAMP_PRESC_10 ((uint32_t)0x00090000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 10 */ +#define FDCAN_TIMESTAMP_PRESC_11 ((uint32_t)0x000A0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 11 */ +#define FDCAN_TIMESTAMP_PRESC_12 ((uint32_t)0x000B0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 12 */ +#define FDCAN_TIMESTAMP_PRESC_13 ((uint32_t)0x000C0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 13 */ +#define FDCAN_TIMESTAMP_PRESC_14 ((uint32_t)0x000D0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 14 */ +#define FDCAN_TIMESTAMP_PRESC_15 ((uint32_t)0x000E0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 15 */ +#define FDCAN_TIMESTAMP_PRESC_16 ((uint32_t)0x000F0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 16 */ +/** + * @} + */ + +/** @defgroup FDCAN_Timeout_Operation FDCAN timeout operation + * @{ + */ +#define FDCAN_TIMEOUT_CONTINUOUS ((uint32_t)0x00000000U) /*!< Timeout continuous operation */ +#define FDCAN_TIMEOUT_TX_EVENT_FIFO ((uint32_t)0x00000002U) /*!< Timeout controlled by Tx Event FIFO */ +#define FDCAN_TIMEOUT_RX_FIFO0 ((uint32_t)0x00000004U) /*!< Timeout controlled by Rx FIFO 0 */ +#define FDCAN_TIMEOUT_RX_FIFO1 ((uint32_t)0x00000006U) /*!< Timeout controlled by Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup Interrupt_Masks Interrupt masks + * @{ + */ +#define FDCAN_IR_MASK ((uint32_t)0x00FFFFFFU) /*!< FDCAN interrupts mask */ +#define FDCAN_ILS_MASK ((uint32_t)0x0000007FU) /*!< FDCAN interrupts group mask */ +/** + * @} + */ + +/** @defgroup FDCAN_flags FDCAN Flags + * @{ + */ +#define FDCAN_FLAG_TX_COMPLETE FDCAN_IR_TC /*!< Transmission Completed */ +#define FDCAN_FLAG_TX_ABORT_COMPLETE FDCAN_IR_TCF /*!< Transmission Cancellation Finished */ +#define FDCAN_FLAG_TX_FIFO_EMPTY FDCAN_IR_TFE /*!< Tx FIFO Empty */ +#define FDCAN_FLAG_RX_HIGH_PRIORITY_MSG FDCAN_IR_HPM /*!< High priority message received */ +#define FDCAN_FLAG_TX_EVT_FIFO_ELT_LOST FDCAN_IR_TEFL /*!< Tx Event FIFO element lost */ +#define FDCAN_FLAG_TX_EVT_FIFO_FULL FDCAN_IR_TEFF /*!< Tx Event FIFO full */ +#define FDCAN_FLAG_TX_EVT_FIFO_NEW_DATA FDCAN_IR_TEFN /*!< Tx Handler wrote Tx Event FIFO element */ +#define FDCAN_FLAG_RX_FIFO0_MESSAGE_LOST FDCAN_IR_RF0L /*!< Rx FIFO 0 message lost */ +#define FDCAN_FLAG_RX_FIFO0_FULL FDCAN_IR_RF0F /*!< Rx FIFO 0 full */ +#define FDCAN_FLAG_RX_FIFO0_NEW_MESSAGE FDCAN_IR_RF0N /*!< New message written to Rx FIFO 0 */ +#define FDCAN_FLAG_RX_FIFO1_MESSAGE_LOST FDCAN_IR_RF1L /*!< Rx FIFO 1 message lost */ +#define FDCAN_FLAG_RX_FIFO1_FULL FDCAN_IR_RF1F /*!< Rx FIFO 1 full */ +#define FDCAN_FLAG_RX_FIFO1_NEW_MESSAGE FDCAN_IR_RF1N /*!< New message written to Rx FIFO 1 */ +#define FDCAN_FLAG_RAM_ACCESS_FAILURE FDCAN_IR_MRAF /*!< Message RAM access failure occurred */ +#define FDCAN_FLAG_ERROR_LOGGING_OVERFLOW FDCAN_IR_ELO /*!< Overflow of FDCAN Error Logging Counter occurred */ +#define FDCAN_FLAG_ERROR_PASSIVE FDCAN_IR_EP /*!< Error_Passive status changed */ +#define FDCAN_FLAG_ERROR_WARNING FDCAN_IR_EW /*!< Error_Warning status changed */ +#define FDCAN_FLAG_BUS_OFF FDCAN_IR_BO /*!< Bus_Off status changed */ +#define FDCAN_FLAG_RAM_WATCHDOG FDCAN_IR_WDI /*!< Message RAM Watchdog event due to missing READY */ +#define FDCAN_FLAG_ARB_PROTOCOL_ERROR FDCAN_IR_PEA /*!< Protocol error in arbitration phase detected */ +#define FDCAN_FLAG_DATA_PROTOCOL_ERROR FDCAN_IR_PED /*!< Protocol error in data phase detected */ +#define FDCAN_FLAG_RESERVED_ADDRESS_ACCESS FDCAN_IR_ARA /*!< Access to reserved address occurred */ +#define FDCAN_FLAG_TIMESTAMP_WRAPAROUND FDCAN_IR_TSW /*!< Timestamp counter wrapped around */ +#define FDCAN_FLAG_TIMEOUT_OCCURRED FDCAN_IR_TOO /*!< Timeout reached */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts FDCAN Interrupts + * @{ + */ + +/** @defgroup FDCAN_Tx_Interrupts FDCAN Tx Interrupts + * @{ + */ +#define FDCAN_IT_TX_COMPLETE FDCAN_IE_TCE /*!< Transmission Completed */ +#define FDCAN_IT_TX_ABORT_COMPLETE FDCAN_IE_TCFE /*!< Transmission Cancellation Finished */ +#define FDCAN_IT_TX_FIFO_EMPTY FDCAN_IE_TFEE /*!< Tx FIFO Empty */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Interrupts FDCAN Rx Interrupts + * @{ + */ +#define FDCAN_IT_RX_HIGH_PRIORITY_MSG FDCAN_IE_HPME /*!< High priority message received */ +/** + * @} + */ + +/** @defgroup FDCAN_Counter_Interrupts FDCAN Counter Interrupts + * @{ + */ +#define FDCAN_IT_TIMESTAMP_WRAPAROUND FDCAN_IE_TSWE /*!< Timestamp counter wrapped around */ +#define FDCAN_IT_TIMEOUT_OCCURRED FDCAN_IE_TOOE /*!< Timeout reached */ +/** + * @} + */ + +/** @defgroup FDCAN_Tx_Event_Fifo_Interrupts FDCAN Tx Event FIFO Interrupts + * @{ + */ +#define FDCAN_IT_TX_EVT_FIFO_ELT_LOST FDCAN_IE_TEFLE /*!< Tx Event FIFO element lost */ +#define FDCAN_IT_TX_EVT_FIFO_FULL FDCAN_IE_TEFFE /*!< Tx Event FIFO full */ +#define FDCAN_IT_TX_EVT_FIFO_NEW_DATA FDCAN_IE_TEFNE /*!< Tx Handler wrote Tx Event FIFO element */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Fifo0_Interrupts FDCAN Rx FIFO 0 Interrupts + * @{ + */ +#define FDCAN_IT_RX_FIFO0_MESSAGE_LOST FDCAN_IE_RF0LE /*!< Rx FIFO 0 message lost */ +#define FDCAN_IT_RX_FIFO0_FULL FDCAN_IE_RF0FE /*!< Rx FIFO 0 full */ +#define FDCAN_IT_RX_FIFO0_NEW_MESSAGE FDCAN_IE_RF0NE /*!< New message written to Rx FIFO 0 */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Fifo1_Interrupts FDCAN Rx FIFO 1 Interrupts + * @{ + */ +#define FDCAN_IT_RX_FIFO1_MESSAGE_LOST FDCAN_IE_RF1LE /*!< Rx FIFO 1 message lost */ +#define FDCAN_IT_RX_FIFO1_FULL FDCAN_IE_RF1FE /*!< Rx FIFO 1 full */ +#define FDCAN_IT_RX_FIFO1_NEW_MESSAGE FDCAN_IE_RF1NE /*!< New message written to Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_Error_Interrupts FDCAN Error Interrupts + * @{ + */ +#define FDCAN_IT_RAM_ACCESS_FAILURE FDCAN_IE_MRAFE /*!< Message RAM access failure occurred */ +#define FDCAN_IT_ERROR_LOGGING_OVERFLOW FDCAN_IE_ELOE /*!< Overflow of FDCAN Error Logging Counter occurred */ +#define FDCAN_IT_RAM_WATCHDOG FDCAN_IE_WDIE /*!< Message RAM Watchdog event due to missing READY */ +#define FDCAN_IT_ARB_PROTOCOL_ERROR FDCAN_IE_PEAE /*!< Protocol error in arbitration phase detected */ +#define FDCAN_IT_DATA_PROTOCOL_ERROR FDCAN_IE_PEDE /*!< Protocol error in data phase detected */ +#define FDCAN_IT_RESERVED_ADDRESS_ACCESS FDCAN_IE_ARAE /*!< Access to reserved address occurred */ +/** + * @} + */ + +/** @defgroup FDCAN_Error_Status_Interrupts FDCAN Error Status Interrupts + * @{ + */ +#define FDCAN_IT_ERROR_PASSIVE FDCAN_IE_EPE /*!< Error_Passive status changed */ +#define FDCAN_IT_ERROR_WARNING FDCAN_IE_EWE /*!< Error_Warning status changed */ +#define FDCAN_IT_BUS_OFF FDCAN_IE_BOE /*!< Bus_Off status changed */ +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts_List FDCAN Interrupts List + * @{ + */ +#define FDCAN_IT_LIST_RX_FIFO0 (FDCAN_IT_RX_FIFO0_MESSAGE_LOST | \ + FDCAN_IT_RX_FIFO0_FULL | \ + FDCAN_IT_RX_FIFO0_NEW_MESSAGE) /*!< RX FIFO 0 Interrupts List */ +#define FDCAN_IT_LIST_RX_FIFO1 (FDCAN_IT_RX_FIFO1_MESSAGE_LOST | \ + FDCAN_IT_RX_FIFO1_FULL | \ + FDCAN_IT_RX_FIFO1_NEW_MESSAGE) /*!< RX FIFO 1 Interrupts List */ +#define FDCAN_IT_LIST_SMSG (FDCAN_IT_TX_ABORT_COMPLETE | \ + FDCAN_IT_TX_COMPLETE | \ + FDCAN_IT_RX_HIGH_PRIORITY_MSG) /*!< Status Message Interrupts List */ +#define FDCAN_IT_LIST_TX_FIFO_ERROR (FDCAN_IT_TX_EVT_FIFO_ELT_LOST | \ + FDCAN_IT_TX_EVT_FIFO_FULL | \ + FDCAN_IT_TX_EVT_FIFO_NEW_DATA | \ + FDCAN_IT_TX_FIFO_EMPTY) /*!< TX FIFO Error Interrupts List */ +#define FDCAN_IT_LIST_MISC (FDCAN_IT_TIMEOUT_OCCURRED | \ + FDCAN_IT_RAM_ACCESS_FAILURE | \ + FDCAN_IT_TIMESTAMP_WRAPAROUND) /*!< Misc. Interrupts List */ +#define FDCAN_IT_LIST_BIT_LINE_ERROR (FDCAN_IT_ERROR_PASSIVE | \ + FDCAN_IT_ERROR_LOGGING_OVERFLOW) /*!< Bit and Line Error Interrupts List */ +#define FDCAN_IT_LIST_PROTOCOL_ERROR (FDCAN_IT_RESERVED_ADDRESS_ACCESS | \ + FDCAN_IT_DATA_PROTOCOL_ERROR | \ + FDCAN_IT_ARB_PROTOCOL_ERROR | \ + FDCAN_IT_RAM_WATCHDOG | \ + FDCAN_IT_BUS_OFF | \ + FDCAN_IT_ERROR_WARNING) /*!< Protocol Error Interrupts List */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts_Group FDCAN Interrupts Group + * @{ + */ +#define FDCAN_IT_GROUP_RX_FIFO0 FDCAN_ILS_RXFIFO0 /*!< RX FIFO 0 Interrupts Group: + RF0LL: Rx FIFO 0 Message Lost + RF0FL: Rx FIFO 0 is Full + RF0NL: Rx FIFO 0 Has New Message */ +#define FDCAN_IT_GROUP_RX_FIFO1 FDCAN_ILS_RXFIFO1 /*!< RX FIFO 1 Interrupts Group: + RF1LL: Rx FIFO 1 Message Lost + RF1FL: Rx FIFO 1 is Full + RF1NL: Rx FIFO 1 Has New Message */ +#define FDCAN_IT_GROUP_SMSG FDCAN_ILS_SMSG /*!< Status Message Interrupts Group: + TCFL: Transmission Cancellation Finished + TCL: Transmission Completed + HPML: High Priority Message */ +#define FDCAN_IT_GROUP_TX_FIFO_ERROR FDCAN_ILS_TFERR /*!< TX FIFO Error Interrupts Group: + TEFLL: Tx Event FIFO Element Lost + TEFFL: Tx Event FIFO Full + TEFNL: Tx Event FIFO New Entry + TFEL: Tx FIFO Empty Interrupt Line */ +#define FDCAN_IT_GROUP_MISC FDCAN_ILS_MISC /*!< Misc. Interrupts Group: + TOOL: Timeout Occurred + MRAFL: Message RAM Access Failure + TSWL: Timestamp Wraparound */ +#define FDCAN_IT_GROUP_BIT_LINE_ERROR FDCAN_ILS_BERR /*!< Bit and Line Error Interrupts Group: + EPL: Error Passive + ELOL: Error Logging Overflow */ +#define FDCAN_IT_GROUP_PROTOCOL_ERROR FDCAN_ILS_PERR /*!< Protocol Error Group: + ARAL: Access to Reserved Address Line + PEDL: Protocol Error in Data Phase Line + PEAL: Protocol Error in Arbitration Phase Line + WDIL: Watchdog Interrupt Line + BOL: Bus_Off Status + EWL: Warning Status */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Macros FDCAN Exported Macros + * @{ + */ + +/** @brief Reset FDCAN handle state. + * @param __HANDLE__ FDCAN handle. + * @retval None + */ +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +#define __HAL_FDCAN_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_FDCAN_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_FDCAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FDCAN_STATE_RESET) +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @brief Enable the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (__HANDLE__)->Instance->IE |= (__INTERRUPT__) + +/** + * @brief Disable the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->IE) &= ~(__INTERRUPT__) + +/** + * @brief Check whether the specified FDCAN interrupt is set or not. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be one of @arg FDCAN_Interrupts + * @retval ITStatus + */ +#define __HAL_FDCAN_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IR & (__INTERRUPT__)) + +/** + * @brief Clear the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ specifies the interrupts to clear. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_CLEAR_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->IR) = (__INTERRUPT__) + +/** + * @brief Check whether the specified FDCAN flag is set or not. + * @param __HANDLE__ FDCAN handle. + * @param __FLAG__ FDCAN flag. + * This parameter can be one of @arg FDCAN_flags + * @retval FlagStatus + */ +#define __HAL_FDCAN_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IR & (__FLAG__)) + +/** + * @brief Clear the specified FDCAN flags. + * @param __HANDLE__ FDCAN handle. + * @param __FLAG__ specifies the flags to clear. + * This parameter can be any combination of @arg FDCAN_flags + * @retval None + */ +#define __HAL_FDCAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + ((__HANDLE__)->Instance->IR) = (__FLAG__) + +/** @brief Check if the specified FDCAN interrupt source is enabled or disabled. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ specifies the FDCAN interrupt source to check. + * This parameter can be a value of @arg FDCAN_Interrupts + * @retval ITStatus + */ +#define __HAL_FDCAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IE & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FDCAN_Exported_Functions + * @{ + */ + +/** @addtogroup FDCAN_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_FDCAN_Init(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DeInit(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnterPowerDownMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ExitPowerDownMode(FDCAN_HandleTypeDef *hfdcan); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_FDCAN_RegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID, pFDCAN_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxEventFifoCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo0CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo1CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferCompleteCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferAbortCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_ErrorStatusCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group2 + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_FDCAN_ConfigFilter(FDCAN_HandleTypeDef *hfdcan, FDCAN_FilterTypeDef *sFilterConfig); +HAL_StatusTypeDef HAL_FDCAN_ConfigGlobalFilter(FDCAN_HandleTypeDef *hfdcan, uint32_t NonMatchingStd, uint32_t NonMatchingExt, uint32_t RejectRemoteStd, uint32_t RejectRemoteExt); +HAL_StatusTypeDef HAL_FDCAN_ConfigExtendedIdMask(FDCAN_HandleTypeDef *hfdcan, uint32_t Mask); +HAL_StatusTypeDef HAL_FDCAN_ConfigRxFifoOverwrite(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo, uint32_t OperationMode); +HAL_StatusTypeDef HAL_FDCAN_ConfigRamWatchdog(FDCAN_HandleTypeDef *hfdcan, uint32_t CounterStartValue); +HAL_StatusTypeDef HAL_FDCAN_ConfigTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampPrescaler); +HAL_StatusTypeDef HAL_FDCAN_EnableTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampOperation); +HAL_StatusTypeDef HAL_FDCAN_DisableTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +uint16_t HAL_FDCAN_GetTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ResetTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ConfigTimeoutCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimeoutOperation, uint32_t TimeoutPeriod); +HAL_StatusTypeDef HAL_FDCAN_EnableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +uint16_t HAL_FDCAN_GetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ResetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ConfigTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan, uint32_t TdcOffset, uint32_t TdcFilter); +HAL_StatusTypeDef HAL_FDCAN_EnableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnableISOMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableISOMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group3 + * @{ + */ +/* Control functions **********************************************************/ +HAL_StatusTypeDef HAL_FDCAN_Start(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_Stop(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_AddMessageToTxFifoQ(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData); +uint32_t HAL_FDCAN_GetLatestTxFifoQRequestBuffer(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_AbortTxRequest(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndex); +HAL_StatusTypeDef HAL_FDCAN_GetRxMessage(FDCAN_HandleTypeDef *hfdcan, uint32_t RxLocation, FDCAN_RxHeaderTypeDef *pRxHeader, uint8_t *pRxData); +HAL_StatusTypeDef HAL_FDCAN_GetTxEvent(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxEventFifoTypeDef *pTxEvent); +HAL_StatusTypeDef HAL_FDCAN_GetHighPriorityMessageStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_HpMsgStatusTypeDef *HpMsgStatus); +HAL_StatusTypeDef HAL_FDCAN_GetProtocolStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_ProtocolStatusTypeDef *ProtocolStatus); +HAL_StatusTypeDef HAL_FDCAN_GetErrorCounters(FDCAN_HandleTypeDef *hfdcan, FDCAN_ErrorCountersTypeDef *ErrorCounters); +uint32_t HAL_FDCAN_IsTxBufferMessagePending(FDCAN_HandleTypeDef *hfdcan, uint32_t TxBufferIndex); +uint32_t HAL_FDCAN_GetRxFifoFillLevel(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo); +uint32_t HAL_FDCAN_GetTxFifoFreeLevel(FDCAN_HandleTypeDef *hfdcan); +uint32_t HAL_FDCAN_IsRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ExitRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group4 + * @{ + */ +/* Interrupts management ******************************************************/ +HAL_StatusTypeDef HAL_FDCAN_ConfigInterruptLines(FDCAN_HandleTypeDef *hfdcan, uint32_t ITList, uint32_t InterruptLine); +HAL_StatusTypeDef HAL_FDCAN_ActivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t ActiveITs, uint32_t BufferIndexes); +HAL_StatusTypeDef HAL_FDCAN_DeactivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t InactiveITs); +void HAL_FDCAN_IRQHandler(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group5 + * @{ + */ +/* Callback functions *********************************************************/ +void HAL_FDCAN_TxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); +void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); +void HAL_FDCAN_RxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); +void HAL_FDCAN_TxFifoEmptyCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); +void HAL_FDCAN_TxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); +void HAL_FDCAN_HighPriorityMessageCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TimestampWraparoundCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TimeoutOccurredCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_ErrorCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_ErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group6 + * @{ + */ +/* Peripheral State functions *************************************************/ +uint32_t HAL_FDCAN_GetError(FDCAN_HandleTypeDef *hfdcan); +HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Types FDCAN Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Variables FDCAN Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Constants FDCAN Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Macros FDCAN Private Macros + * @{ + */ +#define IS_FDCAN_FRAME_FORMAT(FORMAT) (((FORMAT) == FDCAN_FRAME_CLASSIC ) || \ + ((FORMAT) == FDCAN_FRAME_FD_NO_BRS) || \ + ((FORMAT) == FDCAN_FRAME_FD_BRS )) +#define IS_FDCAN_MODE(MODE) (((MODE) == FDCAN_MODE_NORMAL ) || \ + ((MODE) == FDCAN_MODE_RESTRICTED_OPERATION) || \ + ((MODE) == FDCAN_MODE_BUS_MONITORING ) || \ + ((MODE) == FDCAN_MODE_INTERNAL_LOOPBACK ) || \ + ((MODE) == FDCAN_MODE_EXTERNAL_LOOPBACK )) +#define IS_FDCAN_CKDIV(CKDIV) (((CKDIV) == FDCAN_CLOCK_DIV1 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV2 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV4 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV6 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV8 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV10) || \ + ((CKDIV) == FDCAN_CLOCK_DIV12) || \ + ((CKDIV) == FDCAN_CLOCK_DIV14) || \ + ((CKDIV) == FDCAN_CLOCK_DIV16) || \ + ((CKDIV) == FDCAN_CLOCK_DIV18) || \ + ((CKDIV) == FDCAN_CLOCK_DIV20) || \ + ((CKDIV) == FDCAN_CLOCK_DIV22) || \ + ((CKDIV) == FDCAN_CLOCK_DIV24) || \ + ((CKDIV) == FDCAN_CLOCK_DIV26) || \ + ((CKDIV) == FDCAN_CLOCK_DIV28) || \ + ((CKDIV) == FDCAN_CLOCK_DIV30)) +#define IS_FDCAN_NOMINAL_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 512U)) +#define IS_FDCAN_NOMINAL_SJW(SJW) (((SJW) >= 1U) && ((SJW) <= 128U)) +#define IS_FDCAN_NOMINAL_TSEG1(TSEG1) (((TSEG1) >= 1U) && ((TSEG1) <= 256U)) +#define IS_FDCAN_NOMINAL_TSEG2(TSEG2) (((TSEG2) >= 1U) && ((TSEG2) <= 128U)) +#define IS_FDCAN_DATA_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 32U)) +#define IS_FDCAN_DATA_SJW(SJW) (((SJW) >= 1U) && ((SJW) <= 16U)) +#define IS_FDCAN_DATA_TSEG1(TSEG1) (((TSEG1) >= 1U) && ((TSEG1) <= 32U)) +#define IS_FDCAN_DATA_TSEG2(TSEG2) (((TSEG2) >= 1U) && ((TSEG2) <= 16U)) +#define IS_FDCAN_MAX_VALUE(VALUE, MAX) ((VALUE) <= (MAX)) +#define IS_FDCAN_MIN_VALUE(VALUE, MIN) ((VALUE) >= (MIN)) +#define IS_FDCAN_TX_FIFO_QUEUE_MODE(MODE) (((MODE) == FDCAN_TX_FIFO_OPERATION ) || \ + ((MODE) == FDCAN_TX_QUEUE_OPERATION)) +#define IS_FDCAN_ID_TYPE(ID_TYPE) (((ID_TYPE) == FDCAN_STANDARD_ID) || \ + ((ID_TYPE) == FDCAN_EXTENDED_ID)) +#define IS_FDCAN_FILTER_CFG(CONFIG) (((CONFIG) == FDCAN_FILTER_DISABLE ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO0 ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO1 ) || \ + ((CONFIG) == FDCAN_FILTER_REJECT ) || \ + ((CONFIG) == FDCAN_FILTER_HP ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO0_HP) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO1_HP)) +#define IS_FDCAN_TX_LOCATION(LOCATION) (((LOCATION) == FDCAN_TX_BUFFER0 ) || ((LOCATION) == FDCAN_TX_BUFFER1 ) || \ + ((LOCATION) == FDCAN_TX_BUFFER2 )) +#define IS_FDCAN_TX_LOCATION_LIST(LOCATION) (((LOCATION) >= FDCAN_TX_BUFFER0) && \ + ((LOCATION) <= (FDCAN_TX_BUFFER0 | FDCAN_TX_BUFFER1 | FDCAN_TX_BUFFER2))) +#define IS_FDCAN_RX_FIFO(FIFO) (((FIFO) == FDCAN_RX_FIFO0) || \ + ((FIFO) == FDCAN_RX_FIFO1)) +#define IS_FDCAN_RX_FIFO_MODE(MODE) (((MODE) == FDCAN_RX_FIFO_BLOCKING ) || \ + ((MODE) == FDCAN_RX_FIFO_OVERWRITE)) +#define IS_FDCAN_STD_FILTER_TYPE(TYPE) (((TYPE) == FDCAN_FILTER_RANGE) || \ + ((TYPE) == FDCAN_FILTER_DUAL ) || \ + ((TYPE) == FDCAN_FILTER_MASK )) +#define IS_FDCAN_EXT_FILTER_TYPE(TYPE) (((TYPE) == FDCAN_FILTER_RANGE ) || \ + ((TYPE) == FDCAN_FILTER_DUAL ) || \ + ((TYPE) == FDCAN_FILTER_MASK ) || \ + ((TYPE) == FDCAN_FILTER_RANGE_NO_EIDM)) +#define IS_FDCAN_FRAME_TYPE(TYPE) (((TYPE) == FDCAN_DATA_FRAME ) || \ + ((TYPE) == FDCAN_REMOTE_FRAME)) +#define IS_FDCAN_DLC(DLC) (((DLC) == FDCAN_DLC_BYTES_0 ) || \ + ((DLC) == FDCAN_DLC_BYTES_1 ) || \ + ((DLC) == FDCAN_DLC_BYTES_2 ) || \ + ((DLC) == FDCAN_DLC_BYTES_3 ) || \ + ((DLC) == FDCAN_DLC_BYTES_4 ) || \ + ((DLC) == FDCAN_DLC_BYTES_5 ) || \ + ((DLC) == FDCAN_DLC_BYTES_6 ) || \ + ((DLC) == FDCAN_DLC_BYTES_7 ) || \ + ((DLC) == FDCAN_DLC_BYTES_8 ) || \ + ((DLC) == FDCAN_DLC_BYTES_12) || \ + ((DLC) == FDCAN_DLC_BYTES_16) || \ + ((DLC) == FDCAN_DLC_BYTES_20) || \ + ((DLC) == FDCAN_DLC_BYTES_24) || \ + ((DLC) == FDCAN_DLC_BYTES_32) || \ + ((DLC) == FDCAN_DLC_BYTES_48) || \ + ((DLC) == FDCAN_DLC_BYTES_64)) +#define IS_FDCAN_ESI(ESI) (((ESI) == FDCAN_ESI_ACTIVE ) || \ + ((ESI) == FDCAN_ESI_PASSIVE)) +#define IS_FDCAN_BRS(BRS) (((BRS) == FDCAN_BRS_OFF) || \ + ((BRS) == FDCAN_BRS_ON )) +#define IS_FDCAN_FDF(FDF) (((FDF) == FDCAN_CLASSIC_CAN) || \ + ((FDF) == FDCAN_FD_CAN )) +#define IS_FDCAN_EFC(EFC) (((EFC) == FDCAN_NO_TX_EVENTS ) || \ + ((EFC) == FDCAN_STORE_TX_EVENTS)) +#define IS_FDCAN_IT(IT) (((IT) & ~(FDCAN_IR_MASK)) == 0U) +#define IS_FDCAN_IT_GROUP(IT_GROUP) (((IT_GROUP) & ~(FDCAN_ILS_MASK)) == 0U) +#define IS_FDCAN_NON_MATCHING(DESTINATION) (((DESTINATION) == FDCAN_ACCEPT_IN_RX_FIFO0) || \ + ((DESTINATION) == FDCAN_ACCEPT_IN_RX_FIFO1) || \ + ((DESTINATION) == FDCAN_REJECT )) +#define IS_FDCAN_REJECT_REMOTE(DESTINATION) (((DESTINATION) == FDCAN_FILTER_REMOTE) || \ + ((DESTINATION) == FDCAN_REJECT_REMOTE)) +#define IS_FDCAN_IT_LINE(IT_LINE) (((IT_LINE) == FDCAN_INTERRUPT_LINE0) || \ + ((IT_LINE) == FDCAN_INTERRUPT_LINE1)) +#define IS_FDCAN_TIMESTAMP(OPERATION) (((OPERATION) == FDCAN_TIMESTAMP_INTERNAL) || \ + ((OPERATION) == FDCAN_TIMESTAMP_EXTERNAL)) +#define IS_FDCAN_TIMESTAMP_PRESCALER(PRESCALER) (((PRESCALER) == FDCAN_TIMESTAMP_PRESC_1 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_2 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_3 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_4 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_5 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_6 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_7 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_8 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_9 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_10) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_11) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_12) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_13) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_14) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_15) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_16)) +#define IS_FDCAN_TIMEOUT(OPERATION) (((OPERATION) == FDCAN_TIMEOUT_CONTINUOUS ) || \ + ((OPERATION) == FDCAN_TIMEOUT_TX_EVENT_FIFO) || \ + ((OPERATION) == FDCAN_TIMEOUT_RX_FIFO0 ) || \ + ((OPERATION) == FDCAN_TIMEOUT_RX_FIFO1 )) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup FDCAN_Private_Functions_Prototypes FDCAN Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Functions FDCAN Private Functions + * @{ + */ + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ +#endif /* FDCAN1 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FDCAN_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h new file mode 100644 index 0000000..1dad606 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h @@ -0,0 +1,1018 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FLASH_H +#define STM32G0xx_HAL_FLASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + uint32_t Banks; /*!< Select bank to erase. + This parameter must be a value of @ref FLASH_Banks + (FLASH_BANK_BOTH should be used only for mass erase) */ + uint32_t Page; /*!< Initial Flash page to erase when page erase is enabled + This parameter must be a value between 0 and (FLASH_PAGE_NB - 1) */ + uint32_t NbPages; /*!< Number of pages to be erased. + This parameter must be a value between 1 and (FLASH_PAGE_NB - value of initial page)*/ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a combination of the values of @ref FLASH_OB_Type */ + uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP). + Only one WRP area could be programmed at the same time. + This parameter can be value of @ref FLASH_OB_WRP_Area */ + uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP). + This parameter must be a value between 0 and [FLASH_PAGE_NB - 1]*/ + uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP). + This parameter must be a value between WRPStartOffset and [FLASH_PAGE_NB - 1] */ + uint32_t RDPLevel; /*!< Set the read protection level (used for OPTIONBYTE_RDP). + This parameter can be a value of @ref FLASH_OB_Read_Protection */ + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_Type */ + uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of + @ref FLASH_OB_USER_BOR_ENABLE(*), + @ref FLASH_OB_USER_BOR_LEVEL(*), + @ref FLASH_OB_USER_RESET_CONFIG(*), + @ref FLASH_OB_USER_nRST_STOP, + @ref FLASH_OB_USER_nRST_STANDBY, + @ref FLASH_OB_USER_nRST_SHUTDOWN(*), + @ref FLASH_OB_USER_IWDG_SW, + @ref FLASH_OB_USER_IWDG_STOP, + @ref FLASH_OB_USER_IWDG_STANDBY, + @ref FLASH_OB_USER_WWDG_SW, + @ref FLASH_OB_USER_SRAM_PARITY, + @ref FLASH_OB_USER_BANK_SWAP(*), + @ref FLASH_OB_USER_DUAL_BANK(*), + @ref FLASH_OB_USER_nBOOT_SEL, + @ref FLASH_OB_USER_nBOOT1, + @ref FLASH_OB_USER_nBOOT0, + @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + @note (*) availability depends on devices */ +#if defined(FLASH_PCROP_SUPPORT) + uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP). + This parameter must be a combination of @ref FLASH_OB_PCROP_ZONE + and @ref FLASH_OB_PCROP_RDP. Note that once set, Pcrop erase on RDP level 1 regression + (PCROP_RDP bit) can not be reset. It will be reset by mass erase */ + uint32_t PCROP1AStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1AEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1BStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ +#if defined(FLASH_DBANK_SUPPORT) + uint32_t PCROP2AStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2AEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2BStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ +#endif +#endif +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) + uint32_t BootEntryPoint; /*!< Allow to force a unique boot entry point to Flash or system Flash */ + uint32_t SecSize; /*!< This parameter defines securable memory area width in number of pages starting from Flash base address. + This parameter must be a value between [0] and [FLASH_PAGE_NB], + [0] meaning no secure area defined, [1] meaning first page only protected, etc... */ +#if defined(FLASH_DBANK_SUPPORT) + uint32_t SecSize2; /*!< This parameter defines securable memory area width in number of pages starting from 2nd Bank start address. + This parameter must be a value between [0] and [FLASH_PAGE_NB], + [0] meaning no secure area defined, [1] meaning first page only protected, etc... */ +#endif +#endif +} FLASH_OBProgramInitTypeDef; + +/** +* @brief FLASH handle Structure definition +*/ +typedef struct +{ + HAL_LockTypeDef Lock; /* FLASH locking object */ + uint32_t ErrorCode; /* FLASH error code */ + uint32_t ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ + uint32_t Address; /* Internal variable to save address selected for program in IT context */ + uint32_t Banks; /* Internal variable to save current bank selected during erase in IT context */ + uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */ + uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define FLASH_KEY1 0x45670123U /*!< Flash key1 */ +#define FLASH_KEY2 0xCDEF89ABU /*!< Flash key2: used with FLASH_KEY1 + to unlock the FLASH registers access */ +#define FLASH_OPTKEY1 0x08192A3BU /*!< Flash option byte key1 */ +#define FLASH_OPTKEY2 0x4C5D6E7FU /*!< Flash option byte key2: used with FLASH_OPTKEY1 + to allow option bytes operations */ +/** + * @} + */ + +/** @defgroup FLASH_Latency FLASH Latency + * @{ + */ +#define FLASH_LATENCY_0 0x00000000UL /*!< FLASH Zero wait state */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */ +#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ +/** + * @} + */ + +/** @defgroup FLASH_Flags FLASH Flags Definition + * @{ + */ +#define FLASH_FLAG_EOP ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_EOP_Pos) /*!< FLASH End of operation flag */ +#define FLASH_FLAG_OPERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_OPERR_Pos) /*!< FLASH Operation error flag */ +#define FLASH_FLAG_PROGERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PROGERR_Pos) /*!< FLASH Programming error flag */ +#define FLASH_FLAG_WRPERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_WRPERR_Pos) /*!< FLASH Write protection error flag */ +#define FLASH_FLAG_PGAERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PGAERR_Pos) /*!< FLASH Programming alignment error flag */ +#define FLASH_FLAG_SIZERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_SIZERR_Pos) /*!< FLASH Size error flag */ +#define FLASH_FLAG_PGSERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PGSERR_Pos) /*!< FLASH Programming sequence error flag */ +#define FLASH_FLAG_MISERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_MISERR_Pos) /*!< FLASH Fast programming data miss error flag */ +#define FLASH_FLAG_FASTERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_FASTERR_Pos) /*!< FLASH Fast programming error flag */ +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_FLAG_RDERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_RDERR_Pos) /*!< FLASH PCROP read error flag */ +#endif /* FLASH_PCROP_SUPPORT */ +#define FLASH_FLAG_OPTVERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_OPTVERR_Pos) /*!< FLASH Option validity error flag */ +#define FLASH_FLAG_BSY1 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY1_Pos) /*!< FLASH Operation Busy flag for Bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_BSY2 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY2_Pos) /*!< FLASH Operation Busy flag for Bank 2 */ +#endif +#define FLASH_FLAG_BSY FLASH_FLAG_BSY1 /*!< FLASH Operation Busy flag - legacy name for single bank */ +#define FLASH_FLAG_CFGBSY ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_CFGBSY_Pos) /*!< FLASH Configuration Busy flag */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_PESD ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PESD_Pos) /*!< FLASH Programming/erase operation suspended */ +#endif +#define FLASH_FLAG_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCC_Pos) /*!< FLASH ECC correction on bank 1 */ +#define FLASH_FLAG_ECCD1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCD_Pos) /*!< FLASH ECC detection on bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCC_Pos) /*!< FLASH ECC correction on bank 2 */ +#define FLASH_FLAG_ECCD2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCD_Pos) /*!< FLASH ECC detection on bank 2 */ +#endif +#define FLASH_FLAG_ECCC FLASH_FLAG_ECCC1 /*!< FLASH ECC correction - legacy name for single bank */ +#define FLASH_FLAG_ECCD FLASH_FLAG_ECCD1 /*!< FLASH ECC detection - legacy name for single bank */ +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_EOPIE_Pos) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_OPERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_ERRIE_Pos) /*!< Error Interrupt source */ +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_IT_RDERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_RDERRIE_Pos) /*!< PCROP Read Error Interrupt source*/ +#endif +#define FLASH_IT_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCCIE_Pos) /*!< ECC Correction on Bank 1 Interrupt source */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_IT_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCCIE_Pos) /*!< ECC Correction on Bank 2 Interrupt source */ +#endif +#define FLASH_IT_ECCC FLASH_IT_ECCC1 /*!< ECC Correction - legacy name for single bank */ +/** + * @} + */ + +/** @defgroup FLASH_Error FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_OP FLASH_SR_EOP +#define HAL_FLASH_ERROR_PROG FLASH_SR_PROGERR +#define HAL_FLASH_ERROR_WRP FLASH_SR_WRPERR +#define HAL_FLASH_ERROR_PGA FLASH_SR_PGAERR +#define HAL_FLASH_ERROR_SIZ FLASH_SR_SIZERR +#define HAL_FLASH_ERROR_PGS FLASH_SR_PGSERR +#define HAL_FLASH_ERROR_MIS FLASH_SR_MISERR +#define HAL_FLASH_ERROR_FAST FLASH_SR_FASTERR +#if defined(FLASH_PCROP_SUPPORT) +#define HAL_FLASH_ERROR_RD FLASH_SR_RDERR +#endif +#define HAL_FLASH_ERROR_OPTV FLASH_SR_OPTVERR +#define HAL_FLASH_ERROR_ECCD FLASH_ECCR_ECCD +/** + * @} + */ + +/** @defgroup FLASH_Type_Erase FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_PAGES FLASH_CR_PER /*!< Pages erase only */ +#define FLASH_TYPEERASE_MASS FLASH_CR_MER1 /*!< Flash mass erase activation */ +/** + * @} + */ + +/** @defgroup FLASH_Banks FLASH Banks + * @{ + */ +#define FLASH_BANK_1 FLASH_CR_MER1 /*!< Bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_BANK_2 FLASH_CR_MER2 /*!< Bank 2 */ +#endif +/** + * @} + */ + + +/** @defgroup FLASH_Type_Program FLASH Program Type + * @{ + */ +#define FLASH_TYPEPROGRAM_DOUBLEWORD FLASH_CR_PG /*!< Program a double-word (64-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_FAST FLASH_CR_FSTPG /*!< Fast program a 32 row double-word (64-bit) at a specified address */ +/** + * @} + */ + +/** @defgroup FLASH_OB_Type FLASH Option Bytes Type + * @{ + */ +#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ +#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ +#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ +#if defined(FLASH_PCROP_SUPPORT) +#define OPTIONBYTE_PCROP 0x00000008U /*!< PCROP option byte configuration */ +#endif +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define OPTIONBYTE_SEC 0x00000010U /*!< SEC option byte configuration */ +#endif + +#if defined(FLASH_PCROP_SUPPORT) && defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | \ + OPTIONBYTE_PCROP | OPTIONBYTE_SEC) /*!< All option byte configuration */ +#else +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER) /*!< All option byte configuration */ +#endif +/** + * @} + */ + +/** @defgroup FLASH_OB_WRP_Area FLASH WRP Area + * @{ + */ +#define OB_WRPAREA_ZONE_A 0x00000001U /*!< Flash Zone A */ +#define OB_WRPAREA_ZONE_B 0x00000002U /*!< Flash Zone B */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_WRPAREA_ZONE2_A 0x00000004U /*!< Flash Bank 2 Zone A */ +#define OB_WRPAREA_ZONE2_B 0x00000008U /*!< Flash Bank 2 Zone B */ +#endif +/** + * @} + */ + +/** @defgroup FLASH_OB_Read_Protection FLASH Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 0x000000AAU +#define OB_RDP_LEVEL_1 0x000000BBU +#define OB_RDP_LEVEL_2 0x000000CCU /*!< Warning: When enabling read protection level 2 + it is no more possible to go back to level 1 or 0 */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_Type FLASH Option Bytes User Type + * @{ + */ +#if defined(PWR_BOR_SUPPORT) +#define OB_USER_BOR_EN FLASH_OPTR_BOR_EN /*!< BOR reset enable */ +#define OB_USER_BOR_LEV (FLASH_OPTR_BORF_LEV | FLASH_OPTR_BORR_LEV) /*!< BOR reset Level */ +#endif +#define OB_USER_nRST_STOP FLASH_OPTR_nRST_STOP /*!< Reset generated when entering the stop mode */ +#define OB_USER_nRST_STDBY FLASH_OPTR_nRST_STDBY /*!< Reset generated when entering the standby mode */ +#if defined(PWR_SHDW_SUPPORT) +#define OB_USER_nRST_SHDW FLASH_OPTR_nRST_SHDW /*!< Reset generated when entering the shutdown mode */ +#endif +#define OB_USER_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Independent watchdog selection */ +#define OB_USER_IWDG_STOP FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter freeze in stop mode */ +#define OB_USER_IWDG_STDBY FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter freeze in standby mode */ +#define OB_USER_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Window watchdog selection */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_USER_BANK_SWAP FLASH_OPTR_nSWAP_BANK /*!< Swap bank memory addresses */ +#define OB_USER_DUAL_BANK FLASH_OPTR_DUAL_BANK /*!< Select single or dual bank (depending of device memory size) */ +#endif +#define OB_USER_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity check control */ +#define OB_USER_nBOOT_SEL FLASH_OPTR_nBOOT_SEL /*!< Boot Selection */ +#define OB_USER_nBOOT1 FLASH_OPTR_nBOOT1 /*!< nBoot1 configuration */ +#define OB_USER_nBOOT0 FLASH_OPTR_nBOOT0 /*!< nBoot0 configuration */ +#if defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_NRST_MODE FLASH_OPTR_NRST_MODE /*!< Reset pin configuration */ +#endif +#if defined(FLASH_OPTR_IRHEN) +#define OB_USER_INPUT_RESET_HOLDER FLASH_OPTR_IRHEN /*!< Internal reset holder enable */ +#endif + +#if defined(FLASH_DBANK_SUPPORT) +#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_ALL (OB_USER_BOR_EN | OB_USER_BOR_LEV | OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_nRST_SHDW | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +#else +#define OB_USER_ALL ( OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0) /*!< all option bits */ +#endif +#else +#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_ALL (OB_USER_BOR_EN | OB_USER_BOR_LEV | OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_nRST_SHDW | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +#else +#define OB_USER_ALL ( OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0) /*!< all option bits */ +#endif +#endif +/** + * @} + */ + +#if defined(PWR_BOR_SUPPORT) +/** @defgroup FLASH_OB_USER_BOR_ENABLE FLASH Option Bytes User BOR enable + * @{ + */ +#define OB_BOR_DISABLE 0x00000000U /*!< BOR Reset set to default */ +#define OB_BOR_ENABLE FLASH_OPTR_BOR_EN /*!< Use option byte to define BOR thresholds */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_BOR_LEVEL FLASH Option Bytes User BOR Level + * @{ + */ +#define OB_BOR_LEVEL_FALLING_0 0x00000000U /*!< BOR falling level 1 with threshold around 2.0V */ +#define OB_BOR_LEVEL_FALLING_1 FLASH_OPTR_BORF_LEV_0 /*!< BOR falling level 2 with threshold around 2.2V */ +#define OB_BOR_LEVEL_FALLING_2 FLASH_OPTR_BORF_LEV_1 /*!< BOR falling level 3 with threshold around 2.5V */ +#define OB_BOR_LEVEL_FALLING_3 (FLASH_OPTR_BORF_LEV_0 | FLASH_OPTR_BORF_LEV_1) /*!< BOR falling level 4 with threshold around 2.8V */ +#define OB_BOR_LEVEL_RISING_0 0x00000000U /*!< BOR rising level 1 with threshold around 2.1V */ +#define OB_BOR_LEVEL_RISING_1 FLASH_OPTR_BORR_LEV_0 /*!< BOR rising level 2 with threshold around 2.3V */ +#define OB_BOR_LEVEL_RISING_2 FLASH_OPTR_BORR_LEV_1 /*!< BOR rising level 3 with threshold around 2.6V */ +#define OB_BOR_LEVEL_RISING_3 (FLASH_OPTR_BORR_LEV_0 | FLASH_OPTR_BORR_LEV_1) /*!< BOR rising level 4 with threshold around 2.9V */ +/** + * @} + */ +#endif + +/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User Reset On Stop + * @{ + */ +#define OB_STOP_RST 0x00000000U /*!< Reset generated when entering the stop mode */ +#define OB_STOP_NORST FLASH_OPTR_nRST_STOP /*!< No reset generated when entering the stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_STANDBY FLASH Option Bytes User Reset On Standby + * @{ + */ +#define OB_STANDBY_RST 0x00000000U /*!< Reset generated when entering the standby mode */ +#define OB_STANDBY_NORST FLASH_OPTR_nRST_STDBY /*!< No reset generated when entering the standby mode */ +/** + * @} + */ + +#if defined(PWR_SHDW_SUPPORT) +/** @defgroup FLASH_OB_USER_nRST_SHUTDOWN FLASH Option Bytes User Reset On Shutdown + * @{ + */ +#define OB_SHUTDOWN_RST 0x00000000U /*!< Reset generated when entering the shutdown mode */ +#define OB_SHUTDOWN_NORST FLASH_OPTR_nRST_SHDW /*!< No reset generated when entering the shutdown mode */ +/** + * @} + */ +#endif + +/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG Type + * @{ + */ +#define OB_IWDG_HW 0x00000000U /*!< Hardware independent watchdog */ +#define OB_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Software independent watchdog */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STOP FLASH Option Bytes User IWDG Mode On Stop + * @{ + */ +#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Stop mode */ +#define OB_IWDG_STOP_RUN FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter is running in Stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STANDBY FLASH Option Bytes User IWDG Mode On Standby + * @{ + */ +#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Standby mode */ +#define OB_IWDG_STDBY_RUN FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter is running in Standby mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_WWDG_SW FLASH Option Bytes User WWDG Type + * @{ + */ +#define OB_WWDG_HW 0x00000000U /*!< Hardware window watchdog */ +#define OB_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Software window watchdog */ +/** + * @} + */ + +#if defined(FLASH_DBANK_SUPPORT) +/** @defgroup FLASH_OB_USER_BANK_SWAP FLASH Option Bytes User bank swap Type + * @{ + */ +#define OB_USER_DUALBANK_SWAP_ENABLE 0x00000000U /*!< Enable bank swap */ +#define OB_USER_DUALBANK_SWAP_DISABLE FLASH_OPTR_nSWAP_BANK /*!< Disable bank swap */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_DUAL_BANK FLASH Option Bytes User dual bank enable Type + * @{ + */ +#define OB_USER_DUALBANK_DISABLE 0x00000000U /*!< Disable dual bank */ +#define OB_USER_DUALBANK_ENABLE FLASH_OPTR_DUAL_BANK /*!< Enable dual bank */ +/** + * @} + */ +#endif + +/** @defgroup FLASH_OB_USER_SRAM_PARITY FLASH Option Bytes User SRAM parity + * @{ + */ +#define OB_SRAM_PARITY_ENABLE 0x00000000U /*!< Sram parity enable */ +#define OB_SRAM_PARITY_DISABLE FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity disable */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT_SEL FLASH Option Bytes User Boot0 Selection + * @{ + */ +#define OB_BOOT0_FROM_PIN 0x00000000U /*!< BOOT0 signal is defined by PA14/BOOT0 pin value */ +#define OB_BOOT0_FROM_OB FLASH_OPTR_nBOOT_SEL /*!< BOOT0 signal is defined by nBOOT0 option bit */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT1 FLASH Option Bytes User BOOT1 Type + * @{ + */ +#define OB_BOOT1_SRAM 0x00000000U /*!< Embedded SRAM is selected as boot space (if nBOOT0=0 or BOOT0_pin=1) */ +#define OB_BOOT1_SYSTEM FLASH_OPTR_nBOOT1 /*!< System memory is selected as boot space (if nBOOT0=0 or BOOT0_pin=1) */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT0 FLASH Option Bytes User nBOOT0 option bit + * @{ + */ +#define OB_nBOOT0_RESET 0x00000000U /*!< nBOOT0 = 0 */ +#define OB_nBOOT0_SET FLASH_OPTR_nBOOT0 /*!< nBOOT0 = 1 */ +/** + * @} + */ + +#if defined(GPIO_NRST_CONFIG_SUPPORT) +/** @defgroup FLASH_OB_USER_RESET_CONFIG FLASH Option Bytes User reset config bit + * @{ + */ +#define OB_RESET_MODE_INPUT_ONLY FLASH_OPTR_NRST_MODE_0 /*!< Reset pin is in Reset input mode only */ +#define OB_RESET_MODE_GPIO FLASH_OPTR_NRST_MODE_1 /*!< Reset pin is in GPIO mode mode only */ +#define OB_RESET_MODE_INPUT_OUTPUT FLASH_OPTR_NRST_MODE /*!< Reset pin is in reset input and output mode */ +/** + * @} + */ +#endif + +#if defined(FLASH_OPTR_IRHEN) +/** @defgroup FLASH_OB_USER_INPUT_RESET_HOLDER FLASH Option Bytes User input reset holder bit + * @{ + */ +#define OB_IRH_ENABLE 0x00000000U /*!< Internal Reset handler enable */ +#define OB_IRH_DISABLE FLASH_OPTR_IRHEN /*!< Internal Reset handler disable */ +/** + * @} + */ +#endif + +#if defined(FLASH_PCROP_SUPPORT) +/** @defgroup FLASH_OB_PCROP_ZONE FLASH Option Bytes PCROP ZONE + * @{ + */ +#define OB_PCROP_ZONE_A 0x00000001U /*!< PCROP Zone A */ +#define OB_PCROP_ZONE_B 0x00000002U /*!< PCROP Zone B */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_PCROP_ZONE2_A 0x00000004U /*!< PCROP Bank 2 Zone A */ +#define OB_PCROP_ZONE2_B 0x00000008U /*!< PCROP Bank 2 Zone B */ +#endif +/** + * @} + */ + +/** @defgroup FLASH_OB_PCROP_RDP FLASH Option Bytes PCROP On RDP Level Type + * @{ + */ +#define OB_PCROP_RDP_NOT_ERASE 0x00000000U /*!< PCROP area is not erased when the RDP level + is decreased from Level 1 to Level 0 */ +#define OB_PCROP_RDP_ERASE FLASH_PCROP1AER_PCROP_RDP /*!< PCROP area is erased when the RDP level is + decreased from Level 1 to Level 0 (full mass erase). + Once this bit is set only, it will be reset by mass erase */ +/** + * @} + */ +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +/** @defgroup FLASH_OB_SEC_BOOT_LOCK FLASH Option Bytes Secure boot lock + * @{ + */ +#define OB_BOOT_ENTRY_FORCED_NONE 0x00000000U /*!< Boot entry is free */ +#define OB_BOOT_ENTRY_FORCED_FLASH FLASH_SECR_BOOT_LOCK /*!< Boot entry is forced to Flash or System Flash */ +/** + * @} + */ +#endif + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + * @arg @ref FLASH_LATENCY_2 FLASH Two wait states + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * Returned value can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + * @arg @ref FLASH_LATENCY_2 FLASH Two wait states + */ +#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Reset the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + } while (0U) +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be one of the following values : + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt(*) + * @arg @ref FLASH_IT_ECCC1 ECC Correction Interrupt on bank 1 + * @arg @ref FLASH_IT_ECCC2 ECC Correction Interrupt on bank 2(*) + * @arg @ref FLASH_IT_ECCC ECC Correction Interrupt - legacy name for single bank + * @note (*) availability depends on devices + * @retval none + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECC2R, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#else +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#endif + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be one of the following values : + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt(*) + * @arg @ref FLASH_IT_ECCC1 ECC Correction Interrupt on bank 1 + * @arg @ref FLASH_IT_ECCC2 ECC Correction Interrupt on bank 2(*) + * @arg @ref FLASH_IT_ECCC ECC Correction Interrupt - legacy name for single bank + * @note (*) availability depends on devices + * @retval none + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECC2R, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#else +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#endif + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values : + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag(*) + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @arg @ref FLASH_FLAG_BSY1 FLASH bank 1 write/erase operations in progress flag + * @arg @ref FLASH_FLAG_BSY2 FLASH bank 2 write/erase operations in progress flag(*) + * @arg @ref FLASH_FLAG_BSY FLASH write/erase operations in progress flag - legacy name for single bank + * @arg @ref FLASH_FLAG_CFGBSY FLASH configuration is busy : program or erase setting are used. + * @arg @ref FLASH_FLAG_ECCC1 FLASH one ECC error has been detected and corrected + * @arg @ref FLASH_FLAG_ECCD1 FLASH two ECC errors have been detected on bank 1 + * @arg @ref FLASH_FLAG_ECCC2 FLASH one ECC error has been detected and corrected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCD2 FLASH two ECC errors have been detected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCC FLASH one ECC error has been detected and corrected - legacy name for single bank + * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected - legacy name for single bank + * @note (*) availability depends on devices + * @retval The state of FLASH_FLAG (SET or RESET). + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + ((((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + (READ_BIT(FLASH->ECC2R, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u))) +#else +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u)) +#endif + +/** + * @brief Clear the FLASH pending flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be one of the following values : + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @arg @ref FLASH_FLAG_ECCC1 FLASH one ECC error has been detected and corrected + * @arg @ref FLASH_FLAG_ECCD1 FLASH two ECC errors have been detected on bank 1 + * @arg @ref FLASH_FLAG_ECCC2 FLASH one ECC error has been detected and corrected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCD2 FLASH two ECC errors have been detected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCC FLASH one ECC error has been detected and corrected - legacy name for single bank + * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected - legacy name for single bank + * @note (*) availability depends on devices + * @retval None + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->SR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECCR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECC2R = (1uL << ((__FLAG__) & 0x1Fu)); } \ + } while(0U) +#else +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->SR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECCR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + } while(0U) +#endif +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32g0xx_hal_flash_ex.h" +/* Exported variables --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Variables FLASH Exported Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types --------------------------------------------------------*/ +/** @defgroup FLASH_Private_types FLASH Private Types + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#define FLASH_SIZE_DATA_REGISTER FLASHSIZE_BASE + +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_BANK_SIZE (FLASH_SIZE >> 1) /*!< FLASH Bank Size is Flash size divided by 2 */ +#else +#define FLASH_BANK_SIZE (FLASH_SIZE) /*!< FLASH Bank Size */ +#endif + +#define FLASH_PAGE_SIZE 0x00000800U /*!< FLASH Page Size, 2 KBytes */ + +#if defined(STM32G081xx)||defined(STM32G071xx)||defined(STM32G070xx) +#define FLASH_PAGE_NB 64U +#elif defined(STM32G0C1xx)||defined(STM32G0B1xx)||defined(STM32G0B0xx) +/* warning : on those product, constant represents number of page per bank */ +#define FLASH_PAGE_NB 128U +#else +#define FLASH_PAGE_NB 32U +#endif + +#define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */ + +#define FLASH_TYPENONE 0x00000000U /*!< No programming Procedure On Going */ + +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \ + FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \ + FLASH_SR_MISERR | FLASH_SR_FASTERR | FLASH_SR_RDERR | \ + FLASH_SR_OPTVERR) /*!< All SR error flags */ +#else +#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \ + FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \ + FLASH_SR_MISERR | FLASH_SR_FASTERR | \ + FLASH_SR_OPTVERR) /*!< All SR error flags */ +#endif + +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP | FLASH_SR_PESD) +#else +#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP) +#endif + +/* Internal defines for HAL macro usage */ +#define FLASH_FLAG_REG_POS 16u +#define FLASH_FLAG_SR_ID 1u +#define FLASH_FLAG_CR_ID 2u +#define FLASH_FLAG_ECCR1_ID 4u +#define FLASH_FLAG_ECCR2_ID 8u + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ +#define IS_FLASH_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL))) + +#define IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_BANK_SIZE - 1UL))) +#if defined(FLASH_DBANK_SUPPORT) +#define IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE + FLASH_BANK_SIZE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL))) +#endif + +#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 8UL))) + +#define IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= 0x1FFF7000U) && ((__ADDRESS__) <= (0x1FFF7400U - 8UL))) + +#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) ((IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__)) || (IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__))) + +#define IS_FLASH_FAST_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 256UL))) + +#define IS_FLASH_PAGE(__PAGE__) ((__PAGE__) < FLASH_PAGE_NB) + +#if defined(FLASH_DBANK_SUPPORT) +#define IS_FLASH_BANK(__BANK__) (((__BANK__) == FLASH_BANK_1) || \ + ((__BANK__) == FLASH_BANK_2) || \ + ((__BANK__) == (FLASH_BANK_2 | FLASH_BANK_1))) +#else +#define IS_FLASH_BANK(__BANK__) ((__BANK__) == FLASH_BANK_1) +#endif + +#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES) || \ + ((__VALUE__) == FLASH_TYPEERASE_MASS)) + +#define IS_FLASH_TYPEPROGRAM(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAM_FAST)) + +#define IS_OPTIONBYTE(__VALUE__) ((((__VALUE__) & OPTIONBYTE_ALL) != 0x00U) && \ + (((__VALUE__) & ~OPTIONBYTE_ALL) == 0x00U)) + +#if defined(FLASH_DBANK_SUPPORT) +#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B) || \ + ((__VALUE__) == OB_WRPAREA_ZONE2_A) || ((__VALUE__) == OB_WRPAREA_ZONE2_B)) +#else +#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B)) +#endif + +#define IS_OB_RDP_LEVEL(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_1) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_2)) + +#define IS_OB_USER_TYPE(__TYPE__) ((((__TYPE__) & OB_USER_ALL) != 0x00U) && \ + (((__TYPE__) & ~OB_USER_ALL) == 0x00U)) + +#define IS_OB_USER_CONFIG(__TYPE__,__CONFIG__) ((~(__TYPE__) & (__CONFIG__)) == 0x00U) + +#if defined(FLASH_PCROP_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | \ + OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B | OB_PCROP_RDP_ERASE)) == 0x00U) +#else +#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U) +#endif +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define IS_OB_SEC_BOOT_LOCK(__VALUE__) (((__VALUE__) == OB_BOOT_ENTRY_FORCED_NONE) || ((__VALUE__) == OB_BOOT_ENTRY_FORCED_FLASH)) + +#define IS_OB_SEC_SIZE(__VALUE__) ((__VALUE__) < (FLASH_PAGE_NB + 1U)) +#endif + +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1) || \ + ((__LATENCY__) == FLASH_LATENCY_2)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FLASH_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h new file mode 100644 index 0000000..e6538fd --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h @@ -0,0 +1,119 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FLASH_EX_H +#define STM32G0xx_HAL_FLASH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASHEx_Empty_Check FLASHEx Empty Check + * @{ + */ +#define FLASH_PROG_NOT_EMPTY 0x00000000u /*!< 1st location in Flash is programmed */ +#define FLASH_PROG_EMPTY FLASH_ACR_PROGEMPTY /*!< 1st location in Flash is empty */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +void HAL_FLASHEx_EnableDebugger(void); +void HAL_FLASHEx_DisableDebugger(void); +uint32_t HAL_FLASHEx_FlashEmptyCheck(void); +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty); +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks); +#endif +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_PCROP_GRANULARITY_OFFSET 9u /*!< FLASH Code Readout Protection granularity offset */ +#define FLASH_PCROP_GRANULARITY (1UL << FLASH_PCROP_GRANULARITY_OFFSET) /*!< FLASH Code Readout Protection granularity, 512 Bytes */ +/** + * @} + */ + + +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +#define IS_FLASH_EMPTY_CHECK(__VALUE__) (((__VALUE__) == FLASH_PROG_EMPTY) || ((__VALUE__) == FLASH_PROG_NOT_EMPTY)) +void FLASH_PageErase(uint32_t Banks, uint32_t Page); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FLASH_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h new file mode 100644 index 0000000..451c18c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h @@ -0,0 +1,340 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_GPIO_H +#define STM32G0xx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFu) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @{ + */ +#define GPIO_MODE_INPUT (0x00000000u) /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (0x00000001u) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (0x00000011u) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (0x00000002u) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (0x00000012u) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG (0x00000003u) /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (0x10110000u) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (0x10210000u) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (0x10310000u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (0x10120000u) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (0x10220000u) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (0x10320000u) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (0x00000000u) /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM (0x00000001u) /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH (0x00000002u) /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003u) /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL (0x00000000u) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP (0x00000001u) /*!< Pull-up activation */ +#define GPIO_PULLDOWN (0x00000002u) /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line is rising edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line rising pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is falling edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line falling pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (__HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) || \ + __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) \ + do { \ + __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__); \ + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__); \ + } while(0) + + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) + +/** + * @brief Clear the EXTI line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32g0xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @brief GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h new file mode 100644 index 0000000..58e4ff5 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h @@ -0,0 +1,838 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_GPIO_EX_H +#define STM32G0xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ +#if defined (STM32G0C1xx) || defined (STM32G0B1xx) +/*------------------------- STM32G0C1xx / STM32G0B1xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPTIM2 ((uint8_t)0x01) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_LPUART2 ((uint8_t)0x01) /*!< LPUART2 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */ + + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_FDCAN1 ((uint8_t)0x03) /*!< FDCAN1 Alternate Function mapping */ +#define GPIO_AF3_FDCAN2 ((uint8_t)0x03) /*!< FDCAN2 Alternate Function mapping */ +#define GPIO_AF3_LPUART2 ((uint8_t)0x03) /*!< LPUART2 Alternate Function mapping */ +#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */ +#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_COMP3 ((uint8_t)0x07) /*!< COMP3 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_LPUART2 ((uint8_t)0x0A) /*!< LPUART2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0A) + +#endif + +#if defined (STM32G0B0xx) +/*------------------------- STM32G0B0xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */ + + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x09) + +#endif + + +#if defined (STM32G081xx) || defined (STM32G071xx) +/*------------------------- STM32G081xx / STM32G071xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_UCPD1 ((uint8_t)0x03) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF3_UCPD2 ((uint8_t)0x03) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G081xx || STM32G071xx */ + +#if defined (STM32G070xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G070xx */ + +#if defined (STM32G051xx) || defined (STM32G061xx) +/*------------------------- STM32G061xx / STM32G051xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G051xx || STM32G061xx */ + +#if defined (STM32G050xx) +/*------------------------- STM32G050xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G050xx */ + +#if defined (STM32G031xx) || defined (STM32G041xx) +/*------------------------- STM32G041xx / STM32G031xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G031xx || STM32G041xx */ + +#if defined (STM32G030xx) +/*------------------------- STM32G030xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G030xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index +* @{ + */ +#if defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 5uL) +#else +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL : 5uL) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_GPIO_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_hcd.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_hcd.h new file mode 100644 index 0000000..046f1fb --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_hcd.h @@ -0,0 +1,498 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_hcd.h + * @author MCD Application Team + * @brief Header file of HCD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_HCD_H +#define STM32G0xx_HAL_HCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_usb.h" + + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HCD HCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HCD_Exported_Types HCD Exported Types + * @{ + */ + +/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition + * @{ + */ +typedef enum +{ + HAL_HCD_STATE_RESET = 0x00, + HAL_HCD_STATE_READY = 0x01, + HAL_HCD_STATE_ERROR = 0x02, + HAL_HCD_STATE_BUSY = 0x03, + HAL_HCD_STATE_TIMEOUT = 0x04 +} HCD_StateTypeDef; + +typedef USB_DRD_TypeDef HCD_TypeDef; +typedef USB_DRD_CfgTypeDef HCD_InitTypeDef; +typedef USB_DRD_HCTypeDef HCD_HCTypeDef; +typedef USB_DRD_URBStateTypeDef HCD_URBStateTypeDef; +typedef USB_DRD_HCStateTypeDef HCD_HCStateTypeDef; + +typedef enum +{ + HCD_HCD_STATE_DISCONNECTED = 0x00U, + HCD_HCD_STATE_CONNECTED = 0x01U, + HCD_HCD_STATE_RESETED = 0x02U, + HCD_HCD_STATE_RUN = 0x03U, + HCD_HCD_STATE_SUSPEND = 0x04U, + HCD_HCD_STATE_RESUME = 0x05U, +} HCD_HostStateTypeDef; + +/* PMA lookup Table size depending on PMA Size + * 8Bytes each Block 32Bit in each word + */ +#define PMA_BLOCKS ((USB_DRD_PMA_SIZE) / (8U * 32U)) +/** + * @} + */ + +/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition + * @{ + */ +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +typedef struct __HCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ +{ + HCD_TypeDef *Instance; /*!< Register base address */ + HCD_InitTypeDef Init; /*!< HCD required parameters */ + HCD_HCTypeDef hc[16]; /*!< Host channels parameters */ + uint16_t phy_chin_state[8]; /*!< Physical Channel in State (Used/Free) */ + uint16_t phy_chout_state[8]; /*!< Physical Channel out State (Used/Free)*/ + uint32_t PMALookupTable[PMA_BLOCKS]; /*PMA LookUp Table */ + HCD_HostStateTypeDef HostState; /*!< USB current state DICONNECT/CONNECT/RUN/SUSPEND/RESUME */ + HAL_LockTypeDef Lock; /*!< HCD peripheral status */ + __IO HCD_StateTypeDef State; /*!< HCD communication state */ + __IO uint32_t ErrorCode; /*!< HCD Error code */ + void *pData; /*!< Pointer Stack Handler */ +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD SOF callback */ + void (* ConnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Connect callback */ + void (* DisconnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Disconnect callback */ + void (* PortEnabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Enable callback */ + void (* PortDisabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Disable callback */ + void (* HC_NotifyURBChangeCallback)(struct __HCD_HandleTypeDef *hhcd, uint8_t chnum, + HCD_URBStateTypeDef urb_state); /*!< USB OTG HCD Host Channel Notify URB Change callback */ + + void (* MspInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp Init callback */ + void (* MspDeInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp DeInit callback */ +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ +} HCD_HandleTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HCD_Exported_Constants HCD Exported Constants + * @{ + */ + +/** @defgroup HCD_Speed HCD Speed + * @{ + */ +#define HCD_SPEED_FULL USBH_FSLS_SPEED +#define HCD_SPEED_LOW USBH_FSLS_SPEED + +/** + * @} + */ + +/** @defgroup HCD_PHY_Module HCD PHY Module + * @{ + */ +#define HCD_PHY_ULPI 1U +#define HCD_PHY_EMBEDDED 2U +/** + * @} + */ + +/** @defgroup HCD_Error_Code_definition HCD Error Code definition + * @brief HCD Error Code definition + * @{ + */ +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +#define HAL_HCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HCD_Exported_Macros HCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#define __HAL_HCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_HCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__)) +#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + +#define __HAL_HCD_GET_CHNUM(__HANDLE__) (((__HANDLE__)->Instance->ISTR) & USB_ISTR_IDN) +#define __HAL_HCD_GET_CHDIR(__HANDLE__) (((__HANDLE__)->Instance->ISTR) & USB_ISTR_DIR) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup HCD_Exported_Functions HCD Exported Functions + * @{ + */ + +/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, + uint8_t speed, uint8_t ep_type, uint16_t mps); + +HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num); +HAL_StatusTypeDef HAL_HCD_HC_Close(HCD_HandleTypeDef *hhcd, uint8_t ch_num); +void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd); +void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd); + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_HCD_Callback_ID_enumeration_definition HAL USB OTG HCD Callback ID enumeration definition + * @brief HAL USB OTG HCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_HCD_SOF_CB_ID = 0x01, /*!< USB HCD SOF callback ID */ + HAL_HCD_CONNECT_CB_ID = 0x02, /*!< USB HCD Connect callback ID */ + HAL_HCD_DISCONNECT_CB_ID = 0x03, /*!< USB HCD Disconnect callback ID */ + HAL_HCD_PORT_ENABLED_CB_ID = 0x04, /*!< USB HCD Port Enable callback ID */ + HAL_HCD_PORT_DISABLED_CB_ID = 0x05, /*!< USB HCD Port Disable callback ID */ + + HAL_HCD_MSPINIT_CB_ID = 0x06, /*!< USB HCD MspInit callback ID */ + HAL_HCD_MSPDEINIT_CB_ID = 0x07 /*!< USB HCD MspDeInit callback ID */ + +} HAL_HCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_HCD_Callback_pointer_definition HAL USB OTG HCD Callback pointer definition + * @brief HAL USB OTG HCD Callback pointer definition + * @{ + */ + +typedef void (*pHCD_CallbackTypeDef)(HCD_HandleTypeDef *hhcd); /*!< pointer to a common USB OTG HCD callback function */ +typedef void (*pHCD_HC_NotifyURBChangeCallbackTypeDef)(HCD_HandleTypeDef *hhcd, + uint8_t epnum, + HCD_URBStateTypeDef urb_state); /*!< pointer to USB OTG HCD host channel callback */ +/** + * @} + */ + +HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, + HAL_HCD_CallbackIDTypeDef CallbackID, + pHCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, + HAL_HCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, + pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t direction, uint8_t ep_type, + uint8_t token, uint8_t *pbuff, + uint16_t length, uint8_t do_ping); + +/* Non-Blocking mode: Interrupt */ +void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd); +void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_SuspendCallback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_ResumeCallback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, + HCD_URBStateTypeDef urb_state); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_Suspend(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_Resume(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_ResumePort(HCD_HandleTypeDef *hhcd); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd); +HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum); +HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum); +uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum); +uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd); +uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd); + +/* PMA Allocation functions **********************************************/ +/** @addtogroup PMA Allocation + * @{ + */ +HAL_StatusTypeDef HAL_HCD_PMAlloc(HCD_HandleTypeDef *hhcd, uint8_t pipe, + uint16_t pipe_kind, uint16_t mps); + +HAL_StatusTypeDef HAL_HCD_PMADeAlloc(HCD_HandleTypeDef *hhcd, uint8_t pipe); +HAL_StatusTypeDef HAL_HCD_PMAReset(HCD_HandleTypeDef *hhcd); + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup HCD_Private_Macros HCD Private Macros + * @{ + */ +/** @defgroup HCD_LOGICAL_CHANNEL HCD Logical Channel + * @{ + */ +#define HCD_LOGICAL_CH_NOT_OPENED 0xFFU +#define HCD_FREE_CH_NOT_FOUND 0xFFU +/** + * @} + */ + +/** @defgroup HCD_ENDP_Kind HCD Endpoint Kind + * @{ + */ +#define HCD_SNG_BUF 0U +#define HCD_DBL_BUF 1U +/** + * @} + */ + +/* Set Channel */ +#define HCD_SET_CHANNEL USB_DRD_SET_CHEP + +/* Get Channel Register */ +#define HCD_GET_CHANNEL USB_DRD_GET_CHEP + + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bChNum, bDir + * @retval None + */ +#define HCD_FreeUserBuffer USB_DRD_FreeUserBuffer + +/** + * @brief Set the Setup bit in the corresponding channel, when a Setup + transaction is needed. + * @param USBx USB device. + * @param bChNum + * @retval None + */ +#define HAC_SET_CH_TX_SETUP USB_DRD_CHEP_TX_SETUP + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define HCD_SET_CH_TX_STATUS USB_DRD_SET_CHEP_TX_STATUS + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define HCD_SET_CH_RX_STATUS USB_DRD_SET_CHEP_RX_STATUS +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval status + */ +#define HCD_GET_CH_TX_STATUS USB_DRD_GET_CHEP_TX_STATUS +#define HCD_GET_CH_RX_STATUS USB_DRD_GET_CHEP_RX_STATUS +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define HCD_SET_CH_DBUF USB_DRD_SET_CH_KIND + +/** + * @brief Clears bit ERR_RX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define HCD_CLEAR_RX_CH_ERR USB_DRD_CLEAR_CHEP_RX_ERR + +/** + * @brief Clears bit ERR_TX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define HCD_CLEAR_TX_CH_ERR USB_DRD_CLEAR_CHEP_TX_ERR +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define HCD_CLEAR_RX_CH_CTR USB_DRD_CLEAR_RX_CHEP_CTR +#define HCD_CLEAR_TX_CH_CTR USB_DRD_CLEAR_TX_CHEP_CTR + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define HCD_RX_DTOG USB_DRD_RX_DTOG +#define HCD_TX_DTOG USB_DRD_TX_DTOG +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define HCD_CLEAR_RX_DTOG USB_DRD_CLEAR_RX_DTOG +#define HCD_CLEAR_TX_DTOG USB_DRD_CLEAR_TX_DTOG + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define HCD_SET_CH_TX_CNT USB_DRD_SET_CHEP_TX_CNT +#define HCD_SET_CH_RX_CNT USB_DRD_SET_CHEP_RX_CNT +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval Counter value + */ +#define HCD_GET_CH_TX_CNT USB_DRD_GET_CHEP_TX_CNT +#define HCD_GET_CH_RX_CNT USB_DRD_GET_CHEP_RX_CNT +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define HCD_SET_CH_DBUF0_CNT USB_DRD_SET_CHEP_DBUF0_CNT +#define HCD_SET_CH_DBUF1_CNT USB_DRD_SET_CHEP_DBUF1_CNT +#define HCD_SET_CH_DBUF_CNT USB_DRD_SET_CHEP_DBUF_CNT + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define HCD_GET_CH_DBUF0_CNT USB_DRD_GET_CHEP_DBUF0_CNT +#define HCD_GET_CH_DBUF1_CNT USB_DRD_GET_CHEP_DBUF1_CNT +/** + * @} + */ +/* Private functions prototypes ----------------------------------------------*/ + + /** + * @} + */ + /** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_HCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h new file mode 100644 index 0000000..c102762 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h @@ -0,0 +1,782 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_I2C_H +#define STM32G0xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization + section in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \ + : ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32g0xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32g0xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_I2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h new file mode 100644 index 0000000..bf85c12 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h @@ -0,0 +1,166 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_I2C_EX_H +#define STM32G0xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#define I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#if defined(SYSCFG_CFGR1_I2C3_FMP) +#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#else +#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ + ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9)) == I2C_FASTMODEPLUS_PA9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3))) + + + +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32g0xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_I2C_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2s.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2s.h new file mode 100644 index 0000000..003fb8b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2s.h @@ -0,0 +1,556 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2s.h + * @author MCD Application Team + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_I2S_H +#define STM32G0xx_HAL_I2S_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2S + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_Types I2S Exported Types + * @{ + */ + +/** + * @brief I2S Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +} I2S_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */ + HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */ + HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ + HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ + HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ +} HAL_I2S_StateTypeDef; + +/** + * @brief I2S handle Structure definition + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1) +typedef struct __I2S_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +{ + SPI_TypeDef *Instance; /*!< I2S registers base address */ + + I2S_InitTypeDef Init; /*!< I2S communication parameters */ + + uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ + + __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ + + __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ + + uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ + + __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ + + __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ + + __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ + + __IO uint32_t ErrorCode; /*!< I2S Error code + This parameter can be a value of @ref I2S_Error */ + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ + void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ + void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ + void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ + void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ + void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} I2S_HandleTypeDef; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL I2S Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */ + HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */ + HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */ + HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */ + HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */ + HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */ + HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */ + +} HAL_I2S_CallbackIDTypeDef; + +/** + * @brief HAL I2S Callback pointer definition + */ +typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_Exported_Constants I2S Exported Constants + * @{ + */ +/** @defgroup I2S_Error I2S Error + * @{ + */ +#define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ +#define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */ +#define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */ +#define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */ +#define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +#define HAL_I2S_ERROR_BUSY_LINE_RX (0x00000040U) /*!< Busy Rx Line error */ +/** + * @} + */ + +/** @defgroup I2S_Mode I2S Mode + * @{ + */ +#define I2S_MODE_SLAVE_TX (0x00000000U) +#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) +#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) +#define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) +/** + * @} + */ + +/** @defgroup I2S_Standard I2S Standard + * @{ + */ +#define I2S_STANDARD_PHILIPS (0x00000000U) +#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) +#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) +#define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) +#define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format I2S Data Format + * @{ + */ +#define I2S_DATAFORMAT_16B (0x00000000U) +#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) +#define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) +#define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output I2S MCLK Output + * @{ + */ +#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE) +#define I2S_MCLKOUTPUT_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency I2S Audio Frequency + * @{ + */ +#define I2S_AUDIOFREQ_192K (192000U) +#define I2S_AUDIOFREQ_96K (96000U) +#define I2S_AUDIOFREQ_48K (48000U) +#define I2S_AUDIOFREQ_44K (44100U) +#define I2S_AUDIOFREQ_32K (32000U) +#define I2S_AUDIOFREQ_22K (22050U) +#define I2S_AUDIOFREQ_16K (16000U) +#define I2S_AUDIOFREQ_11K (11025U) +#define I2S_AUDIOFREQ_8K (8000U) +#define I2S_AUDIOFREQ_DEFAULT (2U) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity I2S Clock Polarity + * @{ + */ +#define I2S_CPOL_LOW (0x00000000U) +#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) +/** + * @} + */ + +/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition + * @{ + */ +#define I2S_IT_TXE SPI_CR2_TXEIE +#define I2S_IT_RXNE SPI_CR2_RXNEIE +#define I2S_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup I2S_Flags_Definition I2S Flags Definition + * @{ + */ +#define I2S_FLAG_TXE SPI_SR_TXE +#define I2S_FLAG_RXNE SPI_SR_RXNE + +#define I2S_FLAG_UDR SPI_SR_UDR +#define I2S_FLAG_OVR SPI_SR_OVR +#define I2S_FLAG_FRE SPI_SR_FRE + +#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE +#define I2S_FLAG_BSY SPI_SR_BSY + +#define I2S_FLAG_MASK (SPI_SR_RXNE\ + | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup I2S_Exported_macros I2S Exported Macros + * @{ + */ + +/** @brief Reset I2S handle state + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2S_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Disable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Enable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Disable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Checks if the specified I2S interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. + * @param __INTERRUPT__ specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2S flag is set or not. + * @param __HANDLE__ specifies the I2S Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_FRE: Frame error flag + * @arg I2S_FLAG_CHSIDE: Channel Side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the I2S OVR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + }while(0U) +/** @brief Clears the I2S UDR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\ + __IO uint32_t tmpreg_udr = 0x00U;\ + tmpreg_udr = ((__HANDLE__)->Instance->SR);\ + UNUSED(tmpreg_udr); \ + }while(0U) +/** @brief Flush the I2S DR Register. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_FLUSH_RX_DR(__HANDLE__) do{\ + __IO uint32_t tmpreg_dr = 0x00U;\ + tmpreg_dr = ((__HANDLE__)->Instance->DR);\ + UNUSED(tmpreg_dr); \ + }while(0U) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_Private_Macros I2S Private Macros + * @{ + */ + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of I2S SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun error flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_CHSIDE: Channel side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval SET or RESET. + */ +#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\ + & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of I2S CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if I2S Mode parameter is in allowed range. + * @param __MODE__ specifies the I2S Mode. + * This parameter can be a value of @ref I2S_Mode + * @retval None + */ +#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ + ((__MODE__) == I2S_MODE_SLAVE_RX) || \ + ((__MODE__) == I2S_MODE_MASTER_TX) || \ + ((__MODE__) == I2S_MODE_MASTER_RX)) + +#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \ + ((__STANDARD__) == I2S_STANDARD_MSB) || \ + ((__STANDARD__) == I2S_STANDARD_LSB) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_LONG)) + +#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \ + ((__FORMAT__) == I2S_DATAFORMAT_24B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_32B)) + +#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \ + ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE)) + +#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \ + ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ + ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) + +/** @brief Checks if I2S Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the I2S serial clock steady state. + * This parameter can be a value of @ref I2S_Clock_Polarity + * @retval None + */ +#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ + ((__CPOL__) == I2S_CPOL_HIGH)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_I2S_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_irda.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_irda.h new file mode 100644 index 0000000..c238814 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_irda.h @@ -0,0 +1,881 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_irda.h + * @author MCD Application Team + * @brief Header file of IRDA HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_IRDA_H +#define STM32G0xx_HAL_IRDA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup IRDA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Types IRDA Exported Types + * @{ + */ + +/** + * @brief IRDA Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hirda->Init.BaudRate))) + where usart_ker_ckpres is the IRDA input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref IRDAEx_Word_Length */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref IRDA_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref IRDA_Transfer_Mode */ + + uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock + to achieve low-power frequency. + @note Prescaler value 0 is forbidden */ + + uint16_t PowerMode; /*!< Specifies the IRDA power mode. + This parameter can be a value of @ref IRDA_Low_Power */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the IRDA clock source. + This parameter can be a value of @ref IRDA_ClockPrescaler. */ + +} IRDA_InitTypeDef; + +/** + * @brief HAL IRDA State definition + * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState (see @ref IRDA_State_Definition). + * - gState contains IRDA state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized. HAL IRDA Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_IRDA_StateTypeDef; + +/** + * @brief IRDA clock sources definition + */ +typedef enum +{ + IRDA_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + IRDA_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + IRDA_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + IRDA_CLOCKSOURCE_LSE = 0x10U, /*!< LSE clock source */ + IRDA_CLOCKSOURCE_UNDEFINED = 0x20U /*!< Undefined clock source */ +} IRDA_ClockSourceTypeDef; + +/** + * @brief IRDA handle Structure definition + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +typedef struct __IRDA_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ + + uint16_t Mask; /*!< USART RX RDR register mask */ + + DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< IRDA Error code */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Half Complete Callback */ + + void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Complete Callback */ + + void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Half Complete Callback */ + + void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Complete Callback */ + + void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Error Callback */ + + void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Receive Complete Callback */ + + + void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp Init callback */ + + void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp DeInit callback */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +} IRDA_HandleTypeDef; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief HAL IRDA Callback ID enumeration definition + */ +typedef enum +{ + HAL_IRDA_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< IRDA Tx Half Complete Callback ID */ + HAL_IRDA_TX_COMPLETE_CB_ID = 0x01U, /*!< IRDA Tx Complete Callback ID */ + HAL_IRDA_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< IRDA Rx Half Complete Callback ID */ + HAL_IRDA_RX_COMPLETE_CB_ID = 0x03U, /*!< IRDA Rx Complete Callback ID */ + HAL_IRDA_ERROR_CB_ID = 0x04U, /*!< IRDA Error Callback ID */ + HAL_IRDA_ABORT_COMPLETE_CB_ID = 0x05U, /*!< IRDA Abort Complete Callback ID */ + HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< IRDA Abort Transmit Complete Callback ID */ + HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< IRDA Abort Receive Complete Callback ID */ + + HAL_IRDA_MSPINIT_CB_ID = 0x08U, /*!< IRDA MspInit callback ID */ + HAL_IRDA_MSPDEINIT_CB_ID = 0x09U /*!< IRDA MspDeInit callback ID */ + +} HAL_IRDA_CallbackIDTypeDef; + +/** + * @brief HAL IRDA Callback pointer definition + */ +typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer to an IRDA callback function */ + +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Constants IRDA Exported Constants + * @{ + */ + +/** @defgroup IRDA_State_Definition IRDA State Code Definition + * @{ + */ +#define HAL_IRDA_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_BUSY 0x00000024U /*!< An internal process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_IRDA_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between gState and RxState values */ +#define HAL_IRDA_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_IRDA_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup IRDA_Error_Definition IRDA Error Code Definition + * @{ + */ +#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ +#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ +#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */ +#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ +#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +#define HAL_IRDA_ERROR_BUSY ((uint32_t)0x00000020U) /*!< Busy Error */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +#define HAL_IRDA_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup IRDA_Parity IRDA Parity + * @{ + */ +#define IRDA_PARITY_NONE 0x00000000U /*!< No parity */ +#define IRDA_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define IRDA_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode + * @{ + */ +#define IRDA_MODE_RX USART_CR1_RE /*!< RX mode */ +#define IRDA_MODE_TX USART_CR1_TE /*!< TX mode */ +#define IRDA_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup IRDA_Low_Power IRDA Low Power + * @{ + */ +#define IRDA_POWERMODE_NORMAL 0x00000000U /*!< IRDA normal power mode */ +#define IRDA_POWERMODE_LOWPOWER USART_CR3_IRLP /*!< IRDA low power mode */ +/** + * @} + */ + +/** @defgroup IRDA_ClockPrescaler IRDA Clock Prescaler + * @{ + */ +#define IRDA_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define IRDA_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define IRDA_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define IRDA_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define IRDA_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define IRDA_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define IRDA_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define IRDA_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define IRDA_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define IRDA_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define IRDA_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define IRDA_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup IRDA_State IRDA State + * @{ + */ +#define IRDA_STATE_DISABLE 0x00000000U /*!< IRDA disabled */ +#define IRDA_STATE_ENABLE USART_CR1_UE /*!< IRDA enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Mode IRDA Mode + * @{ + */ +#define IRDA_MODE_DISABLE 0x00000000U /*!< Associated UART disabled in IRDA mode */ +#define IRDA_MODE_ENABLE USART_CR3_IREN /*!< Associated UART enabled in IRDA mode */ +/** + * @} + */ + +/** @defgroup IRDA_One_Bit IRDA One Bit Sampling + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disabled */ +#define IRDA_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Tx IRDA DMA Tx + * @{ + */ +#define IRDA_DMA_TX_DISABLE 0x00000000U /*!< IRDA DMA TX disabled */ +#define IRDA_DMA_TX_ENABLE USART_CR3_DMAT /*!< IRDA DMA TX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Rx IRDA DMA Rx + * @{ + */ +#define IRDA_DMA_RX_DISABLE 0x00000000U /*!< IRDA DMA RX disabled */ +#define IRDA_DMA_RX_ENABLE USART_CR3_DMAR /*!< IRDA DMA RX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Request_Parameters IRDA Request Parameters + * @{ + */ +#define IRDA_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define IRDA_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define IRDA_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup IRDA_Flags IRDA Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define IRDA_FLAG_REACK USART_ISR_REACK /*!< IRDA receive enable acknowledge flag */ +#define IRDA_FLAG_TEACK USART_ISR_TEACK /*!< IRDA transmit enable acknowledge flag */ +#define IRDA_FLAG_BUSY USART_ISR_BUSY /*!< IRDA busy flag */ +#define IRDA_FLAG_ABRF USART_ISR_ABRF /*!< IRDA auto Baud rate flag */ +#define IRDA_FLAG_ABRE USART_ISR_ABRE /*!< IRDA auto Baud rate error */ +#define IRDA_FLAG_TXE USART_ISR_TXE_TXFNF /*!< IRDA transmit data register empty */ +#define IRDA_FLAG_TC USART_ISR_TC /*!< IRDA transmission complete */ +#define IRDA_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< IRDA read data register not empty */ +#define IRDA_FLAG_ORE USART_ISR_ORE /*!< IRDA overrun error */ +#define IRDA_FLAG_NE USART_ISR_NE /*!< IRDA noise error */ +#define IRDA_FLAG_FE USART_ISR_FE /*!< IRDA frame error */ +#define IRDA_FLAG_PE USART_ISR_PE /*!< IRDA parity error */ +/** + * @} + */ + +/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define IRDA_IT_PE 0x0028U /*!< IRDA Parity error interruption */ +#define IRDA_IT_TXE 0x0727U /*!< IRDA Transmit data register empty interruption */ +#define IRDA_IT_TC 0x0626U /*!< IRDA Transmission complete interruption */ +#define IRDA_IT_RXNE 0x0525U /*!< IRDA Read data register not empty interruption */ +#define IRDA_IT_IDLE 0x0424U /*!< IRDA Idle interruption */ + +/* Elements values convention: 000000000XXYYYYYb + - YYYYY : Interrupt source position in the XX register (5bits) + - XX : Interrupt source register (2bits) + - 01: CR1 register + - 10: CR2 register + - 11: CR3 register */ +#define IRDA_IT_ERR 0x0060U /*!< IRDA Error interruption */ + +/* Elements values convention: 0000ZZZZ00000000b + - ZZZZ : Flag position in the ISR register(4bits) */ +#define IRDA_IT_ORE 0x0300U /*!< IRDA Overrun error interruption */ +#define IRDA_IT_NE 0x0200U /*!< IRDA Noise error interruption */ +#define IRDA_IT_FE 0x0100U /*!< IRDA Frame error interruption */ +/** + * @} + */ + +/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags + * @{ + */ +#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define IRDA_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define IRDA_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +/** + * @} + */ + +/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask + * @{ + */ +#define IRDA_IT_MASK 0x001FU /*!< IRDA Interruptions flags mask */ +#define IRDA_CR_MASK 0x00E0U /*!< IRDA control register mask */ +#define IRDA_CR_POS 5U /*!< IRDA control register position */ +#define IRDA_ISR_MASK 0x1F00U /*!< IRDA ISR register mask */ +#define IRDA_ISR_POS 8U /*!< IRDA ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Macros IRDA Exported Macros + * @{ + */ + +/** @brief Reset IRDA handle state. + * @param __HANDLE__ IRDA handle. + * @retval None + */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** @brief Flush the IRDA DR register. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified IRDA pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref IRDA_CLEAR_PEF + * @arg @ref IRDA_CLEAR_FEF + * @arg @ref IRDA_CLEAR_NEF + * @arg @ref IRDA_CLEAR_OREF + * @arg @ref IRDA_CLEAR_TCF + * @arg @ref IRDA_CLEAR_IDLEF + * @retval None + */ +#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the IRDA PE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) + + +/** @brief Clear the IRDA FE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) + +/** @brief Clear the IRDA NE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) + +/** @brief Clear the IRDA ORE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) + +/** @brief Clear the IRDA IDLE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) + +/** @brief Check whether the specified IRDA flag is set or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag + * @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref IRDA_FLAG_BUSY Busy flag + * @arg @ref IRDA_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref IRDA_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref IRDA_FLAG_TXE Transmit data register empty flag + * @arg @ref IRDA_FLAG_TC Transmission Complete flag + * @arg @ref IRDA_FLAG_RXNE Receive data register not empty flag + * @arg @ref IRDA_FLAG_ORE OverRun Error flag + * @arg @ref IRDA_FLAG_NE Noise Error flag + * @arg @ref IRDA_FLAG_FE Framing Error flag + * @arg @ref IRDA_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + + +/** @brief Enable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Disable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK)))) + + +/** @brief Check whether the specified IRDA interrupt has occurred or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ORE OverRun Error interrupt + * @arg @ref IRDA_IT_NE Noise Error interrupt + * @arg @ref IRDA_IT_FE Framing Error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>> IRDA_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified IRDA interrupt source is enabled or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \ + (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag + * @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag + * @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag + * @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag + * @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + + +/** @brief Set a specific IRDA request flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup IRDA_Private_Macros + * @{ + */ + +/** @brief Ensure that IRDA Baud rate is less or equal to maximum value. + * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user. + * @retval True or False + */ +#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U) + +/** @brief Ensure that IRDA prescaler value is strictly larger than 0. + * @param __PRESCALER__ specifies the IRDA prescaler value set by the user. + * @retval True or False + */ +#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U) + +/** @brief Ensure that IRDA frame parity is valid. + * @param __PARITY__ IRDA frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ + ((__PARITY__) == IRDA_PARITY_EVEN) || \ + ((__PARITY__) == IRDA_PARITY_ODD)) + +/** @brief Ensure that IRDA communication mode is valid. + * @param __MODE__ IRDA communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__)\ + & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that IRDA power mode is valid. + * @param __MODE__ IRDA power mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ + ((__MODE__) == IRDA_POWERMODE_NORMAL)) + +/** @brief Ensure that IRDA clock Prescaler is valid. + * @param __CLOCKPRESCALER__ IRDA clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_IRDA_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV256)) + +/** @brief Ensure that IRDA state is valid. + * @param __STATE__ IRDA state mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ + ((__STATE__) == IRDA_STATE_ENABLE)) + +/** @brief Ensure that IRDA associated UART/USART mode is valid. + * @param __MODE__ IRDA associated UART/USART mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \ + ((__MODE__) == IRDA_MODE_ENABLE)) + +/** @brief Ensure that IRDA sampling rate is valid. + * @param __ONEBIT__ IRDA sampling rate. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that IRDA DMA TX mode is valid. + * @param __DMATX__ IRDA DMA TX mode. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ + ((__DMATX__) == IRDA_DMA_TX_ENABLE)) + +/** @brief Ensure that IRDA DMA RX mode is valid. + * @param __DMARX__ IRDA DMA RX mode. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ + ((__DMARX__) == IRDA_DMA_RX_ENABLE)) + +/** @brief Ensure that IRDA request is valid. + * @param __PARAM__ IRDA request. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + +/* Include IRDA HAL Extended module */ +#include "stm32g0xx_hal_irda_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); + +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ + +/** @addtogroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_IRDA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_irda_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_irda_ex.h new file mode 100644 index 0000000..5eab367 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_irda_ex.h @@ -0,0 +1,298 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_irda_ex.h + * @author MCD Application Team + * @brief Header file of IRDA HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_IRDA_EX_H +#define STM32G0xx_HAL_IRDA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup IRDAEx IRDAEx + * @brief IRDA Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDAEx_Extended_Exported_Constants IRDAEx Extended Exported Constants + * @{ + */ + +/** @defgroup IRDAEx_Word_Length IRDAEx Word Length + * @{ + */ +#define IRDA_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long frame */ +#define IRDA_WORDLENGTH_8B 0x00000000U /*!< 8-bit long frame */ +#define IRDA_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long frame */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup IRDAEx_Private_Macros IRDAEx Private Macros + * @{ + */ + +/** @brief Report the IRDA clock source. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval IRDA clocking source, written in __CLOCKSOURCE__. + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#else +#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif + +/** @brief Compute the mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None, the mask to apply to the associated UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define IRDA_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** @brief Ensure that IRDA frame length is valid. + * @param __LENGTH__ IRDA frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_IRDA_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == IRDA_WORDLENGTH_7B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_8B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_9B)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_IRDA_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_iwdg.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_iwdg.h new file mode 100644 index 0000000..be83eeb --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_iwdg.h @@ -0,0 +1,242 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_IWDG_H +#define STM32G0xx_HAL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup IWDG IWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Types IWDG Exported Types + * @{ + */ + +/** + * @brief IWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Select the prescaler of the IWDG. + This parameter can be a value of @ref IWDG_Prescaler */ + + uint32_t Reload; /*!< Specifies the IWDG down-counter reload value. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + + uint32_t Window; /*!< Specifies the window value to be compared to the down-counter. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + +} IWDG_InitTypeDef; + +/** + * @brief IWDG Handle Structure definition + */ +typedef struct +{ + IWDG_TypeDef *Instance; /*!< Register base address */ + + IWDG_InitTypeDef Init; /*!< IWDG required parameters */ +} IWDG_HandleTypeDef; + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_Prescaler IWDG Prescaler + * @{ + */ +#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */ +#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */ +#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */ +#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */ +#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */ +#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */ +#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */ + +/** + * @} + */ + +/** @defgroup IWDG_Window_option IWDG Window option + * @{ + */ +#define IWDG_WINDOW_DISABLE IWDG_WINR_WIN +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the IWDG peripheral. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE) + +/** + * @brief Reload IWDG counter with value defined in the reload register + * (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled). + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Functions IWDG Exported Functions + * @{ + */ + +/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions + * @{ + */ +/* Initialization/Start functions ********************************************/ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions + * @{ + */ +/* I/O operation functions ****************************************************/ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_Private_Constants IWDG Private Constants + * @{ + */ + +/** + * @brief IWDG Key Register BitMask + */ +#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */ +#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */ +#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */ +#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Macros IWDG Private Macros + * @{ + */ + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE) + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE) + +/** + * @brief Check IWDG prescaler value. + * @param __PRESCALER__ IWDG prescaler value + * @retval None + */ +#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \ + ((__PRESCALER__) == IWDG_PRESCALER_8) || \ + ((__PRESCALER__) == IWDG_PRESCALER_16) || \ + ((__PRESCALER__) == IWDG_PRESCALER_32) || \ + ((__PRESCALER__) == IWDG_PRESCALER_64) || \ + ((__PRESCALER__) == IWDG_PRESCALER_128)|| \ + ((__PRESCALER__) == IWDG_PRESCALER_256)) + +/** + * @brief Check IWDG reload value. + * @param __RELOAD__ IWDG reload value + * @retval None + */ +#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL) + +/** + * @brief Check IWDG window value. + * @param __WINDOW__ IWDG window value + * @retval None + */ +#define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN) + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_IWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_lptim.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_lptim.h new file mode 100644 index 0000000..e538b6c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_lptim.h @@ -0,0 +1,853 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_lptim.h + * @author MCD Application Team + * @brief Header file of LPTIM HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_LPTIM_H +#define STM32G0xx_HAL_LPTIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#if defined (LPTIM1) || defined (LPTIM2) + +/** @addtogroup LPTIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Types LPTIM Exported Types + * @{ + */ +#define LPTIM_EXTI_LINE_LPTIM1 EXTI_IMR1_IM29 /*!< External interrupt line 29 Connected to the LPTIM1 EXTI Line */ +#define LPTIM_EXTI_LINE_LPTIM2 EXTI_IMR1_IM30 /*!< External interrupt line 30 Connected to the LPTIM2 EXTI Line */ + +/** + * @brief LPTIM Clock configuration definition + */ +typedef struct +{ + uint32_t Source; /*!< Selects the clock source. + This parameter can be a value of @ref LPTIM_Clock_Source */ + + uint32_t Prescaler; /*!< Specifies the counter clock Prescaler. + This parameter can be a value of @ref LPTIM_Clock_Prescaler */ + +} LPTIM_ClockConfigTypeDef; + +/** + * @brief LPTIM Clock configuration definition + */ +typedef struct +{ + uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit + if the ULPTIM input is selected. + Note: This parameter is used only when Ultra low power clock source is used. + Note: If the polarity is configured on 'both edges', an auxiliary clock + (one of the Low power oscillator) must be active. + This parameter can be a value of @ref LPTIM_Clock_Polarity */ + + uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter. + Note: This parameter is used only when Ultra low power clock source is used. + This parameter can be a value of @ref LPTIM_Clock_Sample_Time */ + +} LPTIM_ULPClockConfigTypeDef; + +/** + * @brief LPTIM Trigger configuration definition + */ +typedef struct +{ + uint32_t Source; /*!< Selects the Trigger source. + This parameter can be a value of @ref LPTIM_Trigger_Source */ + + uint32_t ActiveEdge; /*!< Selects the Trigger active edge. + Note: This parameter is used only when an external trigger is used. + This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */ + + uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter. + Note: This parameter is used only when an external trigger is used. + This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */ +} LPTIM_TriggerConfigTypeDef; + +/** + * @brief LPTIM Initialization Structure definition + */ +typedef struct +{ + LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */ + + LPTIM_ULPClockConfigTypeDef UltraLowPowerClock; /*!< Specifies the Ultra Low Power clock parameters */ + + LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */ + + uint32_t OutputPolarity; /*!< Specifies the Output polarity. + This parameter can be a value of @ref LPTIM_Output_Polarity */ + + uint32_t UpdateMode; /*!< Specifies whether the update of the autoreload and the compare + values is done immediately or after the end of current period. + This parameter can be a value of @ref LPTIM_Updating_Mode */ + + uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event + or each external event. + This parameter can be a value of @ref LPTIM_Counter_Source */ + + uint32_t Input1Source; /*!< Specifies source selected for input1 (GPIO or comparator output). + This parameter can be a value of @ref LPTIM_Input1_Source */ + + uint32_t Input2Source; /*!< Specifies source selected for input2 (GPIO or comparator output). + Note: This parameter is used only for encoder feature so is used only + for LPTIM1 instance. + This parameter can be a value of @ref LPTIM_Input2_Source */ +} LPTIM_InitTypeDef; + +/** + * @brief HAL LPTIM State structure definition + */ +typedef enum +{ + HAL_LPTIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_LPTIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_LPTIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_LPTIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_LPTIM_STATE_ERROR = 0x04U /*!< Internal Process is ongoing */ +} HAL_LPTIM_StateTypeDef; + +/** + * @brief LPTIM handle Structure definition + */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +typedef struct __LPTIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +{ + LPTIM_TypeDef *Instance; /*!< Register base address */ + + LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */ + + HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */ + + HAL_LockTypeDef Lock; /*!< LPTIM locking object */ + + __IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */ + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp Init Callback */ + void (* MspDeInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp DeInit Callback */ + void (* CompareMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare match Callback */ + void (* AutoReloadMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload match Callback */ + void (* TriggerCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< External trigger event detection Callback */ + void (* CompareWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare register write complete Callback */ + void (* AutoReloadWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload register write complete Callback */ + void (* DirectionUpCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Up-counting direction change Callback */ + void (* DirectionDownCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Down-counting direction change Callback */ +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +} LPTIM_HandleTypeDef; + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL LPTIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_LPTIM_MSPINIT_CB_ID = 0x00U, /*!< LPTIM Base Msp Init Callback ID */ + HAL_LPTIM_MSPDEINIT_CB_ID = 0x01U, /*!< LPTIM Base Msp DeInit Callback ID */ + HAL_LPTIM_COMPARE_MATCH_CB_ID = 0x02U, /*!< Compare match Callback ID */ + HAL_LPTIM_AUTORELOAD_MATCH_CB_ID = 0x03U, /*!< Auto-reload match Callback ID */ + HAL_LPTIM_TRIGGER_CB_ID = 0x04U, /*!< External trigger event detection Callback ID */ + HAL_LPTIM_COMPARE_WRITE_CB_ID = 0x05U, /*!< Compare register write complete Callback ID */ + HAL_LPTIM_AUTORELOAD_WRITE_CB_ID = 0x06U, /*!< Auto-reload register write complete Callback ID */ + HAL_LPTIM_DIRECTION_UP_CB_ID = 0x07U, /*!< Up-counting direction change Callback ID */ + HAL_LPTIM_DIRECTION_DOWN_CB_ID = 0x08U, /*!< Down-counting direction change Callback ID */ +} HAL_LPTIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< pointer to the LPTIM callback function */ + +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants + * @{ + */ + +/** @defgroup LPTIM_Clock_Source LPTIM Clock Source + * @{ + */ +#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC 0x00000000U +#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL +/** + * @} + */ + +/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler + * @{ + */ +#define LPTIM_PRESCALER_DIV1 0x00000000U +#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0 +#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1 +#define LPTIM_PRESCALER_DIV8 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1) +#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2 +#define LPTIM_PRESCALER_DIV32 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2) +#define LPTIM_PRESCALER_DIV64 (LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2) +#define LPTIM_PRESCALER_DIV128 LPTIM_CFGR_PRESC +/** + * @} + */ + +/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity + * @{ + */ + +#define LPTIM_OUTPUTPOLARITY_HIGH 0x00000000U +#define LPTIM_OUTPUTPOLARITY_LOW LPTIM_CFGR_WAVPOL +/** + * @} + */ + +/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time + * @{ + */ +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION 0x00000000U +#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0 +#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1 +#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT +/** + * @} + */ + +/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity + * @{ + */ +#define LPTIM_CLOCKPOLARITY_RISING 0x00000000U +#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0 +#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1 +/** + * @} + */ + +/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source + * @{ + */ +#define LPTIM_TRIGSOURCE_SOFTWARE 0x0000FFFFU +#define LPTIM_TRIGSOURCE_0 0x00000000U +#define LPTIM_TRIGSOURCE_1 LPTIM_CFGR_TRIGSEL_0 +#define LPTIM_TRIGSOURCE_2 LPTIM_CFGR_TRIGSEL_1 +#define LPTIM_TRIGSOURCE_3 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1) +#define LPTIM_TRIGSOURCE_4 LPTIM_CFGR_TRIGSEL_2 +#define LPTIM_TRIGSOURCE_5 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2) +#define LPTIM_TRIGSOURCE_6 (LPTIM_CFGR_TRIGSEL_1 | LPTIM_CFGR_TRIGSEL_2) +#define LPTIM_TRIGSOURCE_7 LPTIM_CFGR_TRIGSEL +/** + * @} + */ + +/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity + * @{ + */ +#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0 +#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1 +#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN +/** + * @} + */ + +/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time + * @{ + */ +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION 0x00000000U +#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0 +#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1 +#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT +/** + * @} + */ + +/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode + * @{ + */ + +#define LPTIM_UPDATE_IMMEDIATE 0x00000000U +#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD +/** + * @} + */ + +/** @defgroup LPTIM_Counter_Source LPTIM Counter Source + * @{ + */ + +#define LPTIM_COUNTERSOURCE_INTERNAL 0x00000000U +#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE +/** + * @} + */ + +/** @defgroup LPTIM_Input1_Source LPTIM Input1 Source + * @{ + */ + +#define LPTIM_INPUT1SOURCE_GPIO 0x00000000U /*!< For LPTIM1 and LPTIM2 */ +#define LPTIM_INPUT1SOURCE_COMP1 LPTIM_CFGR2_IN1SEL_0 /*!< For LPTIM1 and LPTIM2 */ +#define LPTIM_INPUT1SOURCE_COMP2 LPTIM_CFGR2_IN1SEL_1 /*!< For LPTIM2 */ +#define LPTIM_INPUT1SOURCE_COMP1_COMP2 (LPTIM_CFGR2_IN1SEL_1 | LPTIM_CFGR2_IN1SEL_0) /*!< For LPTIM2 */ +/** + * @} + */ + +/** @defgroup LPTIM_Input2_Source LPTIM Input2 Source + * @{ + */ + +#define LPTIM_INPUT2SOURCE_GPIO 0x00000000U /*!< For LPTIM1 */ +#define LPTIM_INPUT2SOURCE_COMP2 LPTIM_CFGR2_IN2SEL_0 /*!< For LPTIM1 */ +/** + * @} + */ + +/** @defgroup LPTIM_Flag_Definition LPTIM Flags Definition + * @{ + */ + +#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN +#define LPTIM_FLAG_UP LPTIM_ISR_UP +#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK +#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK +#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG +#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM +#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM +/** + * @} + */ + +/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition + * @{ + */ +#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE +#define LPTIM_IT_UP LPTIM_IER_UPIE +#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE +#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE +#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE +#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE +#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros + * @{ + */ + +/** @brief Reset LPTIM handle state. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET) +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the LPTIM peripheral. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE)) + +/** + * @brief Disable the LPTIM peripheral. + * @param __HANDLE__ LPTIM handle + * @note The following sequence is required to solve LPTIM disable HW limitation. + * Please check Errata Sheet ES0335 for more details under "MCU may remain + * stuck in LPTIM interrupt when entering Stop mode" section. + * @note Please call @ref HAL_LPTIM_GetState() after a call to __HAL_LPTIM_DISABLE to + * check for TIMEOUT. + * @retval None + */ +#define __HAL_LPTIM_DISABLE(__HANDLE__) LPTIM_Disable(__HANDLE__) + +/** + * @brief Start the LPTIM peripheral in Continuous mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT) +/** + * @brief Start the LPTIM peripheral in single mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT) + +/** + * @brief Reset the LPTIM Counter register in synchronous mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_RESET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_COUNTRST) + +/** + * @brief Reset after read of the LPTIM Counter register in asynchronous mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_RESET_COUNTER_AFTERREAD(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_RSTARE) + +/** + * @brief Write the passed parameter in the Autoreload register. + * @param __HANDLE__ LPTIM handle + * @param __VALUE__ Autoreload value + * @retval None + * @note The ARR register can only be modified when the LPTIM instance is enabled. + */ +#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__)) + +/** + * @brief Write the passed parameter in the Compare register. + * @param __HANDLE__ LPTIM handle + * @param __VALUE__ Compare value + * @retval None + * @note The CMP register can only be modified when the LPTIM instance is enabled. + */ +#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__)) + +/** + * @brief Check whether the specified LPTIM flag is set or not. + * @param __HANDLE__ LPTIM handle + * @param __FLAG__ LPTIM flag to check + * This parameter can be a value of: + * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag. + * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag. + * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag. + * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag. + * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag. + * @arg LPTIM_FLAG_ARRM : Autoreload match Flag. + * @arg LPTIM_FLAG_CMPM : Compare match Flag. + * @retval The state of the specified flag (SET or RESET). + */ +#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified LPTIM flag. + * @param __HANDLE__ LPTIM handle. + * @param __FLAG__ LPTIM flag to clear. + * This parameter can be a value of: + * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag. + * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag. + * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag. + * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag. + * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag. + * @arg LPTIM_FLAG_ARRM : Autoreload match Flag. + * @arg LPTIM_FLAG_CMPM : Compare match Flag. + * @retval None. + */ +#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** + * @brief Enable the specified LPTIM interrupt. + * @param __HANDLE__ LPTIM handle. + * @param __INTERRUPT__ LPTIM interrupt to set. + * This parameter can be a value of: + * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. + * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. + * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. + * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt. + * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. + * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. + * @arg LPTIM_IT_CMPM : Compare match Interrupt. + * @retval None. + * @note The LPTIM interrupts can only be enabled when the LPTIM instance is disabled. + */ +#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** + * @brief Disable the specified LPTIM interrupt. + * @param __HANDLE__ LPTIM handle. + * @param __INTERRUPT__ LPTIM interrupt to set. + * This parameter can be a value of: + * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. + * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. + * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. + * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt. + * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. + * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. + * @arg LPTIM_IT_CMPM : Compare match Interrupt. + * @retval None. + * @note The LPTIM interrupts can only be disabled when the LPTIM instance is disabled. + */ +#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) + +/** + * @brief Check whether the specified LPTIM interrupt source is enabled or not. + * @param __HANDLE__ LPTIM handle. + * @param __INTERRUPT__ LPTIM interrupt to check. + * This parameter can be a value of: + * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. + * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. + * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. + * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt. + * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. + * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. + * @arg LPTIM_IT_CMPM : Compare match Interrupt. + * @retval Interrupt status. + */ + +#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @brief Enable the LPTIM1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() (EXTI->IMR1 |= LPTIM_EXTI_LINE_LPTIM1) + +/** + * @brief Disable the LPTIM1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM1)) + + +/** + * @brief Enable the LPTIM1 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= LPTIM_EXTI_LINE_LPTIM1) + +/** + * @brief Disable the LPTIM1 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(LPTIM_EXTI_LINE_LPTIM1)) + +/** + * @brief Enable the LPTIM2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT() (EXTI->IMR1 |= LPTIM_EXTI_LINE_LPTIM2) + +/** + * @brief Disable the LPTIM2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM2)) + + +/** + * @brief Enable the LPTIM2 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= LPTIM_EXTI_LINE_LPTIM2) + +/** + * @brief Disable the LPTIM2 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(LPTIM_EXTI_LINE_LPTIM2)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions + * @{ + */ + +/** @addtogroup LPTIM_Exported_Functions_Group1 + * @brief Initialization and Configuration functions. + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim); +HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim); + +/* MSP functions *************************************************************/ +void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ + +/** @addtogroup LPTIM_Exported_Functions_Group2 + * @brief Start-Stop operation functions. + * @{ + */ +/* Start/Stop operation functions *********************************************/ +/* ################################# PWM Mode ################################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################# One Pulse Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################## Set once Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse); +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################### Encoder Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period); +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period); +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################# Time out Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout); +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout); +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################## Counter Mode ###############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period); +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period); +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ + +/** @addtogroup LPTIM_Exported_Functions_Group3 + * @brief Read operation functions. + * @{ + */ +/* Reading operation functions ************************************************/ +uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim); +uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim); +uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ + +/** @addtogroup LPTIM_Exported_Functions_Group4 + * @brief LPTIM IRQ handler and callback functions. + * @{ + */ +/* LPTIM IRQ functions *******************************************************/ +void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim); + +/* CallBack functions ********************************************************/ +void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, pLPTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup LPTIM_Group5 + * @brief Peripheral State functions. + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Types LPTIM Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Variables LPTIM Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Constants LPTIM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Macros LPTIM Private Macros + * @{ + */ + +#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \ + ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC)) + + +#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV128)) + +#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1) + +#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \ + ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH)) + +#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \ + ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \ + ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \ + ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS)) + +#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING)) + +#define IS_LPTIM_TRG_SOURCE(__TRIG__) (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_0) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_1) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_2) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_3) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_4) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_5) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_6) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_7)) + +#define IS_LPTIM_EXT_TRG_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING ) || \ + ((__POLARITY__) == LPTIM_ACTIVEEDGE_FALLING ) || \ + ((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING_FALLING )) + +#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \ + ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \ + ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \ + ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS )) + +#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \ + ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD)) + +#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \ + ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL)) + +#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((__AUTORELOAD__) <= 0x0000FFFFUL) + +#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFFUL) + +#define IS_LPTIM_PERIOD(__PERIOD__) ((__PERIOD__) <= 0x0000FFFFUL) + +#define IS_LPTIM_PULSE(__PULSE__) ((__PULSE__) <= 0x0000FFFFUL) + +#define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__) \ + ((((__INSTANCE__) == LPTIM1) && \ + (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \ + || \ + (((__INSTANCE__) == LPTIM2) && \ + (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2)))) + +#define IS_LPTIM_INPUT2_SOURCE(__INSTANCE__, __SOURCE__) \ + (((__INSTANCE__) == LPTIM1) && \ + (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2))) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Functions LPTIM Private Functions + * @{ + */ +void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPTIM1 || LPTIM2 */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_LPTIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h new file mode 100644 index 0000000..d9a8841 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h @@ -0,0 +1,584 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PCD_H +#define STM32G0xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_usb.h" + +#if defined (USB_DRD_FS) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +typedef USB_DRD_TypeDef PCD_TypeDef; +typedef USB_DRD_CfgTypeDef PCD_InitTypeDef; +typedef USB_DRD_EPTypeDef PCD_EPTypeDef; + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + + + uint32_t lpm_active; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_active; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ + void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32g0xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + + +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= (uint16_t)(~(__INTERRUPT__))) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR2 |= USB_WAKEUP_EXTI_LINE +#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR2 &= ~(USB_WAKEUP_EXTI_LINE) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ +typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ +typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, + pPCD_BcdCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, + pPCD_LpmCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type); + +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + + +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ + + +#define USB_WAKEUP_EXTI_LINE (0x1U << 4) /*!< USB FS EXTI Line WakeUp Interrupt */ + + +/** + * @} + */ + +/** @defgroup PCD_EP0_MPS PCD EP0 MPS + * @{ + */ +#define PCD_EP0MPS_64 EP_MPS_64 +#define PCD_EP0MPS_32 EP_MPS_32 +#define PCD_EP0MPS_16 EP_MPS_16 +#define PCD_EP0MPS_08 EP_MPS_8 +/** + * @} + */ + +/** @defgroup PCD_ENDP PCD ENDP + * @{ + */ +#define PCD_ENDP0 0U +#define PCD_ENDP1 1U +#define PCD_ENDP2 2U +#define PCD_ENDP3 3U +#define PCD_ENDP4 4U +#define PCD_ENDP5 5U +#define PCD_ENDP6 6U +#define PCD_ENDP7 7U +/** + * @} + */ + +/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind + * @{ + */ +#define PCD_SNG_BUF 0U +#define PCD_DBL_BUF 1U +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +/* SetENDPOINT */ +#define PCD_SET_ENDPOINT USB_DRD_SET_CHEP + +/* GetENDPOINT Register value*/ +#define PCD_GET_ENDPOINT USB_DRD_GET_CHEP + +/* ENDPOINT transfer */ +#define USB_EP0StartXfer USB_EPStartXfer + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpNum, bDir + * @retval None + */ +#define PCD_FreeUserBuffer USB_DRD_FreeUserBuffer + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_TX_STATUS USB_DRD_SET_CHEP_TX_STATUS + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_RX_STATUS USB_DRD_SET_CHEP_RX_STATUS + +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_DBUF USB_DRD_SET_CHEP_KIND +#define PCD_CLEAR_EP_DBUF USB_DRD_CLEAR_CHEP_KIND + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_EP_CTR USB_DRD_CLEAR_RX_CHEP_CTR +#define PCD_CLEAR_TX_EP_CTR USB_DRD_CLEAR_TX_CHEP_CTR +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_RX_DTOG USB_DRD_RX_DTOG +#define PCD_TX_DTOG USB_DRD_TX_DTOG +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_DTOG USB_DRD_CLEAR_RX_DTOG +#define PCD_CLEAR_TX_DTOG USB_DRD_CLEAR_TX_DTOG + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define PCD_SET_EP_ADDRESS USB_DRD_SET_CHEP_ADDRESS + +/** + * @brief sets address of the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wAddr address to be set (must be word aligned). + * @retval None + */ +#define PCD_SET_EP_TX_ADDRESS USB_DRD_SET_CHEP_TX_ADDRESS +#define PCD_SET_EP_RX_ADDRESS USB_DRD_SET_CHEP_RX_ADDRESS + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define PCD_SET_EP_TX_CNT USB_DRD_SET_CHEP_TX_CNT +#define PCD_SET_EP_RX_CNT USB_DRD_SET_CHEP_RX_CNT + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval Counter value + */ +#define PCD_GET_EP_TX_CNT USB_DRD_GET_CHEP_TX_CNT +#define PCD_GET_EP_RX_CNT USB_DRD_GET_CHEP_RX_CNT + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define PCD_SET_EP_DBUF_ADDR USB_DRD_SET_CHEP_DBUF_ADDR + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define PCD_SET_EP_DBUF0_CNT USB_DRD_SET_CHEP_DBUF0_CNT +#define PCD_SET_EP_DBUF1_CNT USB_DRD_SET_CHEP_DBUF1_CNT +#define PCD_SET_EP_DBUF_CNT USB_DRD_SET_CHEP_DBUF_CNT + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_CNT USB_DRD_GET_CHEP_DBUF0_CNT +#define PCD_GET_EP_DBUF1_CNT USB_DRD_GET_CHEP_DBUF1_CNT + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_PCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h new file mode 100644 index 0000000..f0732d2 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h @@ -0,0 +1,91 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PCD_EX_H +#define STM32G0xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined (USB_DRD_FS) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + + + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); + +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PCD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h new file mode 100644 index 0000000..1603ce1 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h @@ -0,0 +1,328 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PWR_H +#define STM32G0xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_WakeUp_Pins PWR WakeUp pins + * @{ + */ +#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN6 PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */ +#endif +#define PWR_WAKEUP_PIN6_HIGH PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_LOW ((PWR_CR4_WP1 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP1) /*!< Wakeup pin 1 (with low level detection) */ +#define PWR_WAKEUP_PIN2_LOW ((PWR_CR4_WP2 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP2) /*!< Wakeup pin 2 (with low level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3_LOW ((PWR_CR4_WP3 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP3) /*!< Wakeup pin 3 (with low level detection) */ +#endif +#define PWR_WAKEUP_PIN4_LOW ((PWR_CR4_WP4 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP4) /*!< Wakeup pin 4 (with low level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5_LOW ((PWR_CR4_WP5 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP5) /*!< Wakeup pin 5 (with low level detection) */ +#endif +#define PWR_WAKEUP_PIN6_LOW ((PWR_CR4_WP6 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP6) /*!< Wakeup pin 6 (with low level detection) */ +/** + * @} + */ + +/** @defgroup PWR_Low_Power_Mode_Selection PWR Low Power Mode Selection + * @{ + */ +#define PWR_LOWPOWERMODE_STOP0 (0x00000000u) /*!< Stop 0: stop mode with main regulator */ +#define PWR_LOWPOWERMODE_STOP1 (PWR_CR1_LPMS_0) /*!< Stop 1: stop mode with low power regulator */ +#define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */ +#if defined(PWR_SHDW_SUPPORT) +#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2) /*!< Shutdown mode */ +#endif +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0x00000000u) /*!< Regulator in main mode */ +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Sleep mode */ +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Sleep mode */ +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Stop mode */ +#define PWR_STOPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Stop mode */ +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Status Flags + * @brief Elements values convention: 0000 00XX 000Y YYYYb + * - Y YYYY : Flag position in the XX register (5 bits) + * - XX : Status register (2 bits) + * - 01: SR1 register + * - 10: SR2 register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +#define PWR_FLAG_WUF1 (0x00010000u | PWR_SR1_WUF1) /*!< Wakeup event on wakeup pin 1 */ +#define PWR_FLAG_WUF2 (0x00010000u | PWR_SR1_WUF2) /*!< Wakeup event on wakeup pin 2 */ +#if defined(PWR_CR3_EWUP3) +#define PWR_FLAG_WUF3 (0x00010000u | PWR_SR1_WUF3) /*!< Wakeup event on wakeup pin 3 */ +#endif +#define PWR_FLAG_WUF4 (0x00010000u | PWR_SR1_WUF4) /*!< Wakeup event on wakeup pin 4 */ +#if defined(PWR_CR3_EWUP5) +#define PWR_FLAG_WUF5 (0x00010000u | PWR_SR1_WUF5) /*!< Wakeup event on wakeup pin 5 */ +#endif +#define PWR_FLAG_WUF6 (0x00010000u | PWR_SR1_WUF6) /*!< Wakeup event on wakeup pin 6 */ +#define PWR_FLAG_WUF (0x00010000u | PWR_SR1_WUF) /*!< Wakeup event on all wakeup pin */ +#define PWR_FLAG_SB (0x00010000u | PWR_SR1_SBF) /*!< Standby flag */ +#define PWR_FLAG_WUFI (0x00010000u | PWR_SR1_WUFI) /*!< Wakeup on internal wakeup line */ +#define PWR_FLAG_FLASH_READY (0x00020000u | PWR_SR2_FLASH_RDY) /*!< Flash ready */ +#define PWR_FLAG_REGLPS (0x00020000u | PWR_SR2_REGLPS) /*!< Regulator Low Power started */ +#define PWR_FLAG_REGLPF (0x00020000u | PWR_SR2_REGLPF) /*!< Regulator Low Power flag */ +#if defined(PWR_PVD_SUPPORT) +#define PWR_FLAG_PVDO (0x00020000u | PWR_SR2_PVDO) /*!< Power Voltage Detector output */ +#endif +#if defined(PWR_PVM_SUPPORT) +#define PWR_FLAG_PVMO_USB (0x00020000u | PWR_SR2_PVMO_USB) /*!< Power Voltage Monitoring output */ +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ +/** @brief Check whether or not a specific PWR flag is set. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. (*) + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. (*) + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_SB: StandBy Flag. Indicates that the system + * entered StandBy mode. + * @arg PWR_FLAG_WUFI: Wake-Up Flag Internal. Set when a wakeup is + * detected on the internal wakeup line. + * OR a combination of following values: + * @arg PWR_FLAG_FLASH_READY: Flash is ready. Indicates whether flash + * can be used or not + * @arg PWR_FLAG_REGLPS: Low Power Regulator Started. Indicates whether + * or not the low-power regulator is ready. + * @arg PWR_FLAG_REGLPF: Low Power Regulator Flag. Indicates whether the + * regulator is ready in main mode or is in low-power mode. + * @if defined(STM32G081xx) + * @arg PWR_FLAG_PVDO: Power Voltage Detector Output. Indicates whether + * VDD voltage is below or above the selected PVD threshold. + * @endif + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) (((__FLAG__) & 0x00010000u) ?\ + ((PWR->SR1 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)) :\ + ((PWR->SR2 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u))) + +/** @brief Clear a specific PWR flag. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. (*) + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. (*) + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_WUF: Encompasses all Wake Up Flags. + * @arg PWR_FLAG_SB: Standby Flag. Indicates that the system + * entered Standby mode. + * @retval None + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->SCR = (__FLAG__)) + +/** + * @} + */ + +/* Private constants-------------------------------------------------------*/ +/** @defgroup PWR_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants + * @{ + */ +#define PWR_WUP_POLARITY_SHIFT 0x08u /*!< Internal constant used to retrieve wakeup pin polariry */ +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +#define IS_PWR_WAKEUP_PIN(PIN) ((((PIN) & ((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) != 0x00000000u) && \ + (((PIN) & ~((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) == 0x00000000u)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || \ + ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || \ + ((ENTRY) == PWR_STOPENTRY_WFE)) +/** + * @} + */ + +/* Include PWR HAL Extended module */ +#include "stm32g0xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSTANDBYMode(void); +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h new file mode 100644 index 0000000..3459d99 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h @@ -0,0 +1,643 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PWR_EX_H +#define STM32G0xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Types PWR Extended Exported Types + * @{ + */ + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief PWR PVM configuration structure definition + */ +typedef struct +{ + uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold. + This parameter can be a value of @ref PWREx_PVM_Type. + @arg @ref PWR_PVM_USB Peripheral Voltage Monitoring USB enable */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWREx_PVM_Mode. */ +}PWR_PVMTypeDef; +#endif + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value or a combination of + @ref PWR_PVD_detection_level. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode. */ +}PWR_PVDTypeDef; +#endif + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants + * @{ + */ +#if defined(PWR_PVD_SUPPORT) +/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels + * @note see datasheet for selection voltage value + * @{ + */ +#define PWR_PVDLEVEL_RISING_0 (0x00000000u) /*!< PVD threshold level 0 for rising detection */ +#define PWR_PVDLEVEL_RISING_1 (PWR_CR2_PVDRT_0) /*!< PVD threshold level 1 for rising detection */ +#define PWR_PVDLEVEL_RISING_2 (PWR_CR2_PVDRT_1) /*!< PVD threshold level 2 for rising detection */ +#define PWR_PVDLEVEL_RISING_3 (PWR_CR2_PVDRT_0 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 3 for rising detection */ +#define PWR_PVDLEVEL_RISING_4 (PWR_CR2_PVDRT_2) /*!< PVD threshold level 4 for rising detection */ +#define PWR_PVDLEVEL_RISING_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /*!< PVD threshold level 5 for rising detection */ +#define PWR_PVDLEVEL_RISING_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 6 for rising detection */ +#define PWR_PVDLEVEL_FALLING_0 (0x00000000u) /*!< PVD threshold level 0 for falling detection */ +#define PWR_PVDLEVEL_FALLING_1 (PWR_CR2_PVDFT_0) /*!< PVD threshold level 1 for falling detection */ +#define PWR_PVDLEVEL_FALLING_2 (PWR_CR2_PVDFT_1) /*!< PVD threshold level 2 for falling detection */ +#define PWR_PVDLEVEL_FALLING_3 (PWR_CR2_PVDFT_0 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 3 for falling detection */ +#define PWR_PVDLEVEL_FALLING_4 (PWR_CR2_PVDFT_2) /*!< PVD threshold level 4 for falling detection */ +#define PWR_PVDLEVEL_FALLING_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /*!< PVD threshold level 5 for falling detection */ +#define PWR_PVDLEVEL_FALLING_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 6 for falling detection */ +#define PWR_PVDLEVEL_0 (PWR_PVDLEVEL_RISING_0 | PWR_PVDLEVEL_FALLING_0) /*!< same PVD threshold level 0 on rising & falling */ +#define PWR_PVDLEVEL_1 (PWR_PVDLEVEL_RISING_1 | PWR_PVDLEVEL_FALLING_1) /*!< same PVD threshold level 1 on rising & falling */ +#define PWR_PVDLEVEL_2 (PWR_PVDLEVEL_RISING_2 | PWR_PVDLEVEL_FALLING_2) /*!< same PVD threshold level 2 on rising & falling */ +#define PWR_PVDLEVEL_3 (PWR_PVDLEVEL_RISING_3 | PWR_PVDLEVEL_FALLING_3) /*!< same PVD threshold level 3 on rising & falling */ +#define PWR_PVDLEVEL_4 (PWR_PVDLEVEL_RISING_4 | PWR_PVDLEVEL_FALLING_4) /*!< same PVD threshold level 4 on rising & falling */ +#define PWR_PVDLEVEL_5 (PWR_PVDLEVEL_RISING_5 | PWR_PVDLEVEL_FALLING_5) /*!< same PVD threshold level 5 on rising & falling */ +#define PWR_PVDLEVEL_6 (PWR_PVDLEVEL_RISING_6 | PWR_PVDLEVEL_FALLING_6) /*!< same PVD threshold level 6 on rising & falling */ +#define PWR_PVDLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /*!< External input analog voltage (compared internally to VREFINT) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000u) /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001u) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002u) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001u) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002u) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003u) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVD (EXTI_IMR1_IM16) /*!< External interrupt line 16 connected to PVD */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line + * @{ + */ +#define PWR_EVENT_LINE_PVD (EXTI_EMR1_EM16) /*!< Event line 16 connected to PVD */ +/** + * @} + */ +#endif + +#if defined(PWR_PVM_SUPPORT) +/** @defgroup PWREx_PVM_Type Peripheral Voltage Monitoring type + * @{ + */ +#define PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */ +/** + * @} + */ +/** @defgroup PWREx_PVM_Mode PWR PVM interrupt and event mode + * @{ + */ +#define PWR_PVM_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */ +#define PWR_PVM_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVM_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVM_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVM_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVM_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVM_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ +/** @defgroup PWR_PVM_EXTI_LINE PWR PVM external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVM (EXTI_IMR2_IM34) /*!< External interrupt line 34 connected to PVM */ +/** + * @} + */ + +/** @defgroup PWR_PVM_EVENT_LINE PWR PVM event line + * @{ + */ +#define PWR_EVENT_LINE_PVM (EXTI_EMR2_EM34) /*!< Event line 34 connected to PVM */ +/** + * @} + */ +#endif + +/** @defgroup PWREx_VBAT_Battery_Charging_Selection PWR battery charging resistor selection + * @{ + */ +#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000u) /*!< VBAT charging through a 5 kOhms resistor */ +#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR4_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_Bit_Number GPIO bit position + * @brief for I/O pull up/down setting in standby/shutdown mode + * @{ + */ +#define PWR_GPIO_BIT_0 PWR_PUCRB_PU0 /*!< GPIO port I/O pin 0 */ +#define PWR_GPIO_BIT_1 PWR_PUCRB_PU1 /*!< GPIO port I/O pin 1 */ +#define PWR_GPIO_BIT_2 PWR_PUCRB_PU2 /*!< GPIO port I/O pin 2 */ +#define PWR_GPIO_BIT_3 PWR_PUCRB_PU3 /*!< GPIO port I/O pin 3 */ +#define PWR_GPIO_BIT_4 PWR_PUCRB_PU4 /*!< GPIO port I/O pin 4 */ +#define PWR_GPIO_BIT_5 PWR_PUCRB_PU5 /*!< GPIO port I/O pin 5 */ +#define PWR_GPIO_BIT_6 PWR_PUCRB_PU6 /*!< GPIO port I/O pin 6 */ +#define PWR_GPIO_BIT_7 PWR_PUCRB_PU7 /*!< GPIO port I/O pin 7 */ +#define PWR_GPIO_BIT_8 PWR_PUCRB_PU8 /*!< GPIO port I/O pin 8 */ +#define PWR_GPIO_BIT_9 PWR_PUCRB_PU9 /*!< GPIO port I/O pin 9 */ +#define PWR_GPIO_BIT_10 PWR_PUCRB_PU10 /*!< GPIO port I/O pin 10 */ +#define PWR_GPIO_BIT_11 PWR_PUCRB_PU11 /*!< GPIO port I/O pin 11 */ +#define PWR_GPIO_BIT_12 PWR_PUCRB_PU12 /*!< GPIO port I/O pin 12 */ +#define PWR_GPIO_BIT_13 PWR_PUCRB_PU13 /*!< GPIO port I/O pin 13 */ +#define PWR_GPIO_BIT_14 PWR_PUCRB_PU14 /*!< GPIO port I/O pin 14 */ +#define PWR_GPIO_BIT_15 PWR_PUCRB_PU15 /*!< GPIO port I/O pin 15 */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_Port GPIO Port + * @{ + */ +#define PWR_GPIO_A (0x00000000u) /*!< GPIO port A */ +#define PWR_GPIO_B (0x00000001u) /*!< GPIO port B */ +#define PWR_GPIO_C (0x00000002u) /*!< GPIO port C */ +#define PWR_GPIO_D (0x00000003u) /*!< GPIO port D */ +#if defined (GPIOE) +#define PWR_GPIO_E (0x00000004u) /*!< GPIO port E */ +#endif +#define PWR_GPIO_F (0x00000005u) /*!< GPIO port F */ +/** + * @} + */ + +/** @defgroup PWREx_Flash_PowerDown Flash Power Down modes + * @{ + */ +#define PWR_FLASHPD_LPRUN PWR_CR1_FPD_LPRUN /*!< Enable Flash power down in low power run mode */ +#define PWR_FLASHPD_LPSLEEP PWR_CR1_FPD_LPSLP /*!< Enable Flash power down in low power sleep mode */ +#define PWR_FLASHPD_STOP PWR_CR1_FPD_STOP /*!< Enable Flash power down in stop mode */ +/** + * @} + */ + +/** @defgroup PWREx_Regulator_Voltage_Scale PWR Regulator voltage scale + * @{ + */ +#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS_0 /*!< Voltage scaling range 1 */ +#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 /*!< Voltage scaling range 2 */ +/** + * @} + */ + +/** @addtogroup PWR_Flag PWR Status Flags + * @brief Elements values convention: 0000 00XX 000Y YYYYb + * - Y YYYY : Flag position in the XX register (5 bits) + * - XX : Status register (2 bits) + * - 01: SR1 register + * - 10: SR2 register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +#if defined(PWR_PVM_SUPPORT) +#define PWR_FLAG_PVMOUSB (0x00020000u | PWR_SR2_PVMO_USB) /*!< USB Peripheral Voltage Monitoring output */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Macros PWR Extended Exported Macros + * @{ + */ +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Enable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Disable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt Rising flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_RISING_FLAG() (EXTI->RPR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt Falling flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() (EXTI->FPR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt Rising flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt Falling flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR1, PWR_EXTI_LINE_PVD) +#endif + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Enable the PVM Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Event Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM) + +/** + * @brief Disable the PVM Event Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Disable the PVM Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM) + +/** + * @brief Check whether or not the PVM EXTI interrupt Rising flag is set. + * @retval EXTI PVM Line Status. + */ +#define __HAL_PWR_PVM_EXTI_GET_RISING_FLAG() (EXTI->RPR2 & PWR_EXTI_LINE_PVM) + +/** + * @brief Check whether or not the PVM EXTI interrupt Falling flag is set. + * @retval EXTI PVM Line Status. + */ +#define __HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() (EXTI->FPR2 & PWR_EXTI_LINE_PVM) + +/** + * @brief Clear the PVM EXTI interrupt Rising flag. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Clear the PVM EXTI interrupt Falling flag. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR2, PWR_EXTI_LINE_PVM) +#endif +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask + * @{ + */ +#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */ +#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */ +#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */ +#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */ +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros + * @{ + */ + +#define IS_PWR_BATTERY_RESISTOR_SELECT(__RESISTOR__) (((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_5) || \ + ((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) + +#define IS_PWR_GPIO_BIT_NUMBER(__BIT_NUMBER__) ((((__BIT_NUMBER__) & 0x0000FFFFu) != 0x00u) && \ + (((__BIT_NUMBER__) & 0xFFFF0000u) == 0x00u)) +#if defined (GPIOE) +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_D) || \ + ((__GPIO__) == PWR_GPIO_E) || \ + ((__GPIO__) == PWR_GPIO_F)) +#else +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_D) || \ + ((__GPIO__) == PWR_GPIO_F)) +#endif + +#define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) != 0x00u) && \ + (((__MODE__) & ~(PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) == 0x00u)) + +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) + +#if defined(PWR_PVD_SUPPORT) +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) & ~(PWR_CR2_PVDRT | PWR_CR2_PVDFT)) == 0x00000000u) + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING) || \ + ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) +#endif + +#if defined(PWR_PVM_SUPPORT) +#define IS_PWR_PVM_TYPE(TYPE) ((TYPE) == PWR_PVM_USB) + +#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING)) +#endif +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection); +void HAL_PWREx_DisableBatteryCharging(void); +#if defined(PWR_CR3_ENB_ULP) +void HAL_PWREx_EnablePORMonitorSampling(void); +void HAL_PWREx_DisablePORMonitorSampling(void); +#endif +void HAL_PWREx_EnableInternalWakeUpLine(void); +void HAL_PWREx_DisableInternalWakeUpLine(void); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); +#if defined(PWR_CR3_RRS) +void HAL_PWREx_EnableSRAMRetention(void); +void HAL_PWREx_DisableSRAMRetention(void); +#endif +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode); +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode); +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); +#if defined(PWR_PVD_SUPPORT) +/* Power voltage detection configuration functions ****************************/ +HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWREx_EnablePVD(void); +void HAL_PWREx_DisablePVD(void); +#endif +#if defined(PWR_PVM_SUPPORT) +/* Power voltage monitoring configuration functions ***************************/ +void HAL_PWREx_EnableVddIO2(void); +void HAL_PWREx_DisableVddIO2(void); +void HAL_PWREx_EnableVddUSB(void); +void HAL_PWREx_DisableVddUSB(void); +void HAL_PWREx_EnablePVMUSB(void); +void HAL_PWREx_DisablePVMUSB(void); +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM); +#endif + +/* Low Power modes configuration functions ************************************/ +void HAL_PWREx_EnableLowPowerRunMode(void); +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); +#if defined(PWR_SHDW_SUPPORT) +void HAL_PWREx_EnterSHUTDOWNMode(void); +#endif + +#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT) +void HAL_PWREx_PVD_PVM_IRQHandler(void); +void HAL_PWREx_PVD_PVM_Rising_Callback(void); +void HAL_PWREx_PVD_PVM_Falling_Callback(void); +#elif defined(PWR_PVD_SUPPORT) +void HAL_PWREx_PVD_IRQHandler(void); +void HAL_PWREx_PVD_Rising_Callback(void); +void HAL_PWREx_PVD_Falling_Callback(void); +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PWR_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h new file mode 100644 index 0000000..61d0101 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h @@ -0,0 +1,3111 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RCC_H +#define STM32G0xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_rcc.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RCC_Private_Constants + * @{ + */ +/* Defines used for Flags */ +#define CR_REG_INDEX 1U +#define BDCR_REG_INDEX 2U +#define CSR_REG_INDEX 3U +#if defined(RCC_HSI48_SUPPORT) +#define CRRCR_REG_INDEX 4U +#endif /* RCC_HSI48_SUPPORT */ + +#define RCC_FLAG_MASK 0x1FU + +/* Define used for IS_RCC_CLOCKTYPE() */ +#define RCC_CLOCKTYPE_ALL (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1) /*!< All clocktype to configure */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) \ + (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#else +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) \ + (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) + +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)127U) + +#define IS_RCC_HSIDIV(__DIV__) (((__DIV__) == RCC_HSI_DIV1) || ((__DIV__) == RCC_HSI_DIV2) || \ + ((__DIV__) == RCC_HSI_DIV4) || ((__DIV__) == RCC_HSI_DIV8) || \ + ((__DIV__) == RCC_HSI_DIV16) || ((__DIV__) == RCC_HSI_DIV32)|| \ + ((__DIV__) == RCC_HSI_DIV64) || ((__DIV__) == RCC_HSI_DIV128)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_NONE) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_PLLM_VALUE(__VALUE__) ((__VALUE__) <= RCC_PLLM_DIV8) + +#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) + +#define IS_RCC_PLLP_VALUE(__VALUE__) ((RCC_PLLP_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLP_DIV32)) + +#if defined(RCC_PLLQ_SUPPORT) +#define IS_RCC_PLLQ_VALUE(__VALUE__) ((RCC_PLLQ_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLQ_DIV8)) +#endif /* RCC_PLLQ_SUPPORT */ + +#define IS_RCC_PLLR_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8)) + +#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_ALL) != 0x00UL) && (((__CLK__) & ~RCC_CLOCKTYPE_ALL) == 0x00UL)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) + +#if defined(RCC_MCO2_SUPPORT) +#define IS_RCC_MCO(__MCOX__) ( ((__MCOX__) == RCC_MCO1) || ((__MCOX__) == RCC_MCO2) ) +#else +#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1) +#endif /* RCC_MCO2_SUPPORT */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI48) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTC_WKUP)) +#elif defined(STM32G0B0xx) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTC_WKUP)) +#else +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) +#endif /* STM32G0C1xx || STM32G0B1xx */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16) || ((__DIV__) == RCC_MCODIV_32) || \ + ((__DIV__) == RCC_MCODIV_64) || ((__DIV__) == RCC_MCODIV_128) || \ + ((__DIV__) == RCC_MCODIV_256)|| ((__DIV__) == RCC_MCODIV_512) || \ + ((__DIV__) == RCC_MCODIV_1024)) +#else +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16) || ((__DIV__) == RCC_MCODIV_32) || \ + ((__DIV__) == RCC_MCODIV_64) || ((__DIV__) == RCC_MCODIV_128)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_MCO2_SUPPORT) +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI48) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTC_WKUP)) +#else +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTC_WKUP)) +#endif /* RCC_HSI48_SUPPORT */ +#define IS_RCC_MCO2DIV(__DIV__) (((__DIV__) == RCC_MCO2DIV_1) || ((__DIV__) == RCC_MCO2DIV_2) || \ + ((__DIV__) == RCC_MCO2DIV_4) || ((__DIV__) == RCC_MCO2DIV_8) || \ + ((__DIV__) == RCC_MCO2DIV_16) || ((__DIV__) == RCC_MCO2DIV_32) || \ + ((__DIV__) == RCC_MCO2DIV_64) || ((__DIV__) == RCC_MCO2DIV_128)|| \ + ((__DIV__) == RCC_MCO2DIV_256)|| ((__DIV__) == RCC_MCO2DIV_512)|| \ + ((__DIV__) == RCC_MCO2DIV_1024)) + +#endif /* RCC_MCO2_SUPPORT */ + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a value of @ref RCC_PLLM_Clock_Divider */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 */ + + uint32_t PLLP; /*!< PLLP: PLL Division factor. + User have to set the PLLQ parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + +#if defined(RCC_PLLQ_SUPPORT) + uint32_t PLLQ; /*!< PLLQ: PLL Division factor. + User have to set the PLLQ parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ +#endif /* RCC_PLLQ_SUPPORT */ + + uint32_t PLLR; /*!< PLLR: PLL Division for the main system clock. + User have to set the PLLR parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSIDiv; /*!< The division factor of the HSI16. + This parameter can be a value of @ref RCC_HSI_Div */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + +#if defined(RCC_HSI48_SUPPORT) + uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32G0C1xx/STM32G0B1xx/STM32G0B0xx devices). + This parameter can be a value of @ref RCC_HSI48_Config */ + +#endif /* RCC_HSI48_SUPPORT */ + + RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a combination of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_DBP_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT /* LSE timeout in ms */ +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 0x00000020U /*!< HSI48 to configure */ +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< External clock source for LSE clock */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT 64U /*!< Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Div HSI Div + * @{ + */ +#define RCC_HSI_DIV1 0x00000000U /*!< HSI clock is not divided */ +#define RCC_HSI_DIV2 RCC_CR_HSIDIV_0 /*!< HSI clock is divided by 2 */ +#define RCC_HSI_DIV4 RCC_CR_HSIDIV_1 /*!< HSI clock is divided by 4 */ +#define RCC_HSI_DIV8 (RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 8 */ +#define RCC_HSI_DIV16 RCC_CR_HSIDIV_2 /*!< HSI clock is divided by 16 */ +#define RCC_HSI_DIV32 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 32 */ +#define RCC_HSI_DIV64 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1) /*!< HSI clock is divided by 64 */ +#define RCC_HSI_DIV128 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +#define RCC_HSI48_ON RCC_CR_HSI48ON /*!< HSI48 clock activation */ +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ +/** + * @} + */ + +/** @defgroup RCC_PLLM_Clock_Divider PLLM Clock Divider + * @{ + */ +#define RCC_PLLM_DIV1 0x00000000U /*!< PLLM division factor = 8 */ +#define RCC_PLLM_DIV2 RCC_PLLCFGR_PLLM_0 /*!< PLLM division factor = 2 */ +#define RCC_PLLM_DIV3 RCC_PLLCFGR_PLLM_1 /*!< PLLM division factor = 3 */ +#define RCC_PLLM_DIV4 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 4 */ +#define RCC_PLLM_DIV5 RCC_PLLCFGR_PLLM_2 /*!< PLLM division factor = 5 */ +#define RCC_PLLM_DIV6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 6 */ +#define RCC_PLLM_DIV7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLLM division factor = 7 */ +#define RCC_PLLM_DIV8 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1| RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider + * @{ + */ +#define RCC_PLLP_DIV2 RCC_PLLCFGR_PLLP_0 /*!< PLLP division factor = 2 */ +#define RCC_PLLP_DIV3 RCC_PLLCFGR_PLLP_1 /*!< PLLP division factor = 3 */ +#define RCC_PLLP_DIV4 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 4 */ +#define RCC_PLLP_DIV5 RCC_PLLCFGR_PLLP_2 /*!< PLLP division factor = 5 */ +#define RCC_PLLP_DIV6 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 6 */ +#define RCC_PLLP_DIV7 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV8 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 8 */ +#define RCC_PLLP_DIV9 RCC_PLLCFGR_PLLP_3 /*!< PLLP division factor = 9 */ +#define RCC_PLLP_DIV10 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 10 */ +#define RCC_PLLP_DIV11 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 11 */ +#define RCC_PLLP_DIV12 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 12 */ +#define RCC_PLLP_DIV13 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 13 */ +#define RCC_PLLP_DIV14 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 14 */ +#define RCC_PLLP_DIV15 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 15 */ +#define RCC_PLLP_DIV16 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 16 */ +#define RCC_PLLP_DIV17 RCC_PLLCFGR_PLLP_4 /*!< PLLP division factor = 17 */ +#define RCC_PLLP_DIV18 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 18 */ +#define RCC_PLLP_DIV19 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 19 */ +#define RCC_PLLP_DIV20 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 20 */ +#define RCC_PLLP_DIV21 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 21 */ +#define RCC_PLLP_DIV22 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 22 */ +#define RCC_PLLP_DIV23 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 23 */ +#define RCC_PLLP_DIV24 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 24 */ +#define RCC_PLLP_DIV25 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3) /*!< PLLP division factor = 25 */ +#define RCC_PLLP_DIV26 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 26 */ +#define RCC_PLLP_DIV27 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 27 */ +#define RCC_PLLP_DIV28 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 28 */ +#define RCC_PLLP_DIV29 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 29 */ +#define RCC_PLLP_DIV30 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 30 */ +#define RCC_PLLP_DIV31 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 31 */ +#define RCC_PLLP_DIV32 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 32 */ +/** + * @} + */ + +#if defined(RCC_PLLQ_SUPPORT) +/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider + * @{ + */ +#define RCC_PLLQ_DIV2 RCC_PLLCFGR_PLLQ_0 /*!< PLLQ division factor = 2 */ +#define RCC_PLLQ_DIV3 RCC_PLLCFGR_PLLQ_1 /*!< PLLQ division factor = 3 */ +#define RCC_PLLQ_DIV4 (RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 4 */ +#define RCC_PLLQ_DIV5 RCC_PLLCFGR_PLLQ_2 /*!< PLLQ division factor = 5 */ +#define RCC_PLLQ_DIV6 (RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 6 */ +#define RCC_PLLQ_DIV7 (RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_1) /*!< PLLQ division factor = 7 */ +#define RCC_PLLQ_DIV8 (RCC_PLLCFGR_PLLQ_2 |RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 8 */ +/** * @} + */ +#endif /* RCC_PLLQ_SUPPORT */ + +/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider + * @{ + */ +#define RCC_PLLR_DIV2 RCC_PLLCFGR_PLLR_0 /*!< PLLR division factor = 2 */ +#define RCC_PLLR_DIV3 RCC_PLLCFGR_PLLR_1 /*!< PLLR division factor = 3 */ +#define RCC_PLLR_DIV4 (RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 4 */ +#define RCC_PLLR_DIV5 RCC_PLLCFGR_PLLR_2 /*!< PLLR division factor = 5 */ +#define RCC_PLLR_DIV6 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 6 */ +#define RCC_PLLR_DIV7 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_1) /*!< PLLR division factor = 7 */ +#define RCC_PLLR_DIV8 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 8 */ +/** * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Output PLL Clock Output + * @{ + */ +#define RCC_PLLPCLK RCC_PLLCFGR_PLLPEN /*!< PLLPCLK selection from main PLL */ +#if defined(RCC_PLLQ_SUPPORT) +#define RCC_PLLQCLK RCC_PLLCFGR_PLLQEN /*!< PLLQCLK selection from main PLL */ +#endif /* RCC_PLLQ_SUPPORT */ +#define RCC_PLLRCLK RCC_PLLCFGR_PLLREN /*!< PLLRCLK selection from main PLL */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_1 /*!< PLL selection as system clock */ +#define RCC_SYSCLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection as system clock */ +#define RCC_SYSCLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_1 /*!< PLL used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source APB Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NONE 0x00000000U /*!< No clock configured for RTC */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U +#if defined(RCC_MCO2_SUPPORT) +#define RCC_MCO2 0x00000001U /*!< MCO2 index */ +#endif /* RCC_MCO2_SUPPORT */ + +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO1 output disabled, no clock on MCO1 */ +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_1 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< PLLCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_CFGR_MCOSEL_3) +#define RCC_MCO1SOURCE_PLLPCLK RCC_CFGR_MCOSEL_3 /*!< PLLPCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLQCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_0) /*!< PLLQCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_RTCCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1) /*!< RTCCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_RTC_WKUP (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_0) /*!< RTC_Wakeup selection as MCO1 source */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Prescaler MCO1 Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 0x00000000U /*!< MCO not divided */ +#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO divided by 16 */ +#define RCC_MCODIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 32 */ +#define RCC_MCODIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 64 */ +#define RCC_MCODIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 128 */ +#if defined(RCC_CFGR_MCOPRE_3) +#define RCC_MCODIV_256 RCC_CFGR_MCOPRE_3 /*!< MCO divided by 256 */ +#define RCC_MCODIV_512 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 512 */ +#define RCC_MCODIV_1024 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 1024 */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source + * @{ + */ +#define RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO2 output disabled, no clock on MCO2 */ +#define RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO2SOURCE_HSI48 RCC_CFGR_MCO2SEL_1 /*!< HSI48 selection as MCO2 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_1| RCC_CFGR_MCO2SEL_0) /*!< HSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLCLK (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_0) /*!< PLLCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_1) /*!< LSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< LSE selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLPCLK RCC_CFGR_MCO2SEL_3 /*!< PLLPCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLQCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_0) /*!< PLLQCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_RTCCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1) /*!< RTCCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< RTC_Wakeup selection as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_MCO2_Clock_Prescaler MCO2 Clock Prescaler + * @{ + */ +#define RCC_MCO2DIV_1 0x00000000U /*!< MCO2 not divided */ +#define RCC_MCO2DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO2 divided by 2 */ +#define RCC_MCO2DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO2 divided by 4 */ +#define RCC_MCO2DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 8 */ +#define RCC_MCO2DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO2 divided by 16 */ +#define RCC_MCO2DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 32 */ +#define RCC_MCO2DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 64 */ +#define RCC_MCO2DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 128 */ +#define RCC_MCO2DIV_256 RCC_CFGR_MCO2PRE_3 /*!< MCO2 divided by 256 */ +#define RCC_MCO2DIV_512 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 512 */ +#define RCC_MCO2DIV_1024 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 1024 */ +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define RCC_IT_CSS RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */ +#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ +#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */ +#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ +#define RCC_FLAG_PINRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos) /*!< PIN reset flag */ +#define RCC_FLAG_PWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PWRRSTF_Pos) /*!< BOR or POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ + +#if defined(RCC_HSI48_SUPPORT) +/* Flags in the CRRCR register */ +#define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_RC48RDY_Pos) /*!< HSI48 Ready flag */ +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Configuration + * @{ + */ +#define RCC_LSEDRIVE_LOW 0x00000000U /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable AHB Peripheral Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#endif /* DMA2 */ + + +#define __HAL_RCC_FLASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* RNG */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* AES */ + +#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) +#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enable_Disable IOPORT Clock Enable Disable + * @brief Enable or disable the IO Ports clock. + * @note After reset, the IO ports clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* GPIOE */ + +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) +#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) +#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) +#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM2 */ + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM4 */ + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRS */ + +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* USART5 */ + +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* USART6 */ + +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPUART1 */ + +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPUART2 */ + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* I2C3 */ + +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* CEC */ + +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* UCPD1 */ + +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* UCPD2 */ + +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* FDCAN1 || FDCAN2 */ + +#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* DAC1 */ + +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPTIM2 */ + +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM15 */ + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) +#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) +#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) +#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) +#endif /* DAC1 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) +#endif /* LPTIM2 */ +#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) +#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) +#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) +#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) +#define __HAL_RCC_TIM14_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) +#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) +#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enabled_Disabled_Status AHB Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) != RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) != RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) != RESET) +#endif /* AES */ + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) == RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) == RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) == RESET) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enabled_Disabled_Status IOPORT Clock Enabled or Disabled Status + * @brief Check whether the IO Port clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) != RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) != RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) != RESET) + + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) == RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) == RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enabled_Disabled_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) != 0U) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) != 0U) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) != 0U) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) != 0U) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) != 0U) +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN) != 0U) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) != 0U) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) != 0U) +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) != 0U) +#endif /* FDCAN1 || FDCAN2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) != 0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) != 0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) != 0U) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) != 0U) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) != 0U) +#define __HAL_RCC_USART4_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) != 0U) +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) != 0U) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) != 0U) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN)!= 0U) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN)!= 0U) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) != 0U) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) != 0U) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) != 0U) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) != 0U) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) != 0U) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) != 0U) +#endif /* UCPD2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) != 0U) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) != 0U) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) != 0U) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) != 0U) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) != 0U) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) == 0U) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) == 0U) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) == 0U) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) == 0U) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) == 0U) +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN) == 0U) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) == 0U) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) == 0U) +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) == 0U) +#endif /* FDCAN1 || FDCAN2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) == 0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) == 0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) == 0U) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) == 0U) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) == 0U) +#define __HAL_RCC_USART4_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) == 0U) +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) == 0U) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) == 0U) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN)== 0U) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN)== 0U) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) == 0U) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) == 0U) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) == 0U) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) == 0U) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) == 0U) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) == 0U) +#endif /* UCPD2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) == 0U) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) == 0U) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) == 0U) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) == 0U) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) == 0U) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enabled_Disabled_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) != 0U) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) != 0U) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) != 0U) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) != 0U) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) != 0U) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) != 0U) +#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) != 0U) + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) == 0U) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) == 0U) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) == 0U) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) == 0U) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) == 0U) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) == 0U) +#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Force_Release_Reset AHB Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() WRITE_REG(RCC->AHBRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#if defined(DMA2) +#define __HAL_RCC_DMA2_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA2RST) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) +#if defined(RNG) +#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_RNGRST) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_AESRST) +#endif /* AES */ + +#define __HAL_RCC_AHB_RELEASE_RESET() WRITE_REG(RCC->AHBRSTR, 0x00000000U) +#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#if defined(DMA2) +#define __HAL_RCC_DMA2_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA2RST) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) +#if defined(RNG) +#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_RNGRST) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_AESRST) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Force_Release_Reset IOPORT Force Release Reset + * @brief Force or release IO Port reset. + * @{ + */ +#define __HAL_RCC_IOP_FORCE_RESET() WRITE_REG(RCC->IOPRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOERST) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +#define __HAL_RCC_IOP_RELEASE_RESET() WRITE_REG(RCC->IOPRSTR, 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOERST) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() WRITE_REG(RCC->APBRSTR1, 0xFFFFFFFFU) + +#if defined(TIM2) +#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM2RST) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#if defined(TIM4) +#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM4RST) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM6RST) +#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM7RST) +#if defined(CRS) +#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CRSRST) +#endif /* CRS */ +#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI2RST) +#if defined(SPI3) +#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI3RST) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART3RST) +#define __HAL_RCC_USART4_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART4RST) +#if defined(USART5) +#define __HAL_RCC_USART5_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART5RST) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART6RST) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART1RST) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART2RST) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C2RST) +#if defined(I2C3) +#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C3RST) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CECRST) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD1RST) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD2RST) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USBRST) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_FDCANRST) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) +#if defined(DAC1) +#define __HAL_RCC_DAC1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DAC1RST) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM2RST) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM1RST) +#endif /* LPTIM1 */ +#define __HAL_RCC_APB1_RELEASE_RESET() WRITE_REG(RCC->APBRSTR1, 0x00000000U) +#if defined(TIM2) +#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM2RST) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#if defined(TIM4) +#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM4RST) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM6RST) +#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM7RST) +#if defined(CRS) +#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CRSRST) +#endif /* CRS */ +#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI2RST) +#if defined(SPI3) +#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI3RST) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART3RST) +#define __HAL_RCC_USART4_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART4RST) +#if defined(USART5) +#define __HAL_RCC_USART5_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART5RST) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART6RST) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART1RST) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART2RST) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C2RST) +#if defined(I2C3) +#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C3RST) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CECRST) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD1RST) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD2RST) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USBRST) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_FDCANRST) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) +#if defined(DAC1) +#define __HAL_RCC_DAC1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DAC1RST) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM2RST) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM1RST) +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APBRSTR2, 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#if defined(TIM15) +#define __HAL_RCC_TIM15_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM15RST) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) + +#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APBRSTR2, 0x00U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#if defined(TIM15) +#define __HAL_RCC_TIM15_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM15RST) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enable_Disable AHB Peripherals Clock Sleep Enable Disable + * @brief Enable or disable the AHB peripherals clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) +#endif /* AES */ +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) +#endif /* AES */ + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enable_Disable IOPORT Clock Sleep Enable Disable + * @brief Enable or disable the IOPORT clock during Low Power (Sleep) mode. + * @note IOPORT clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) +#define __HAL_RCC_USART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) +#define __HAL_RCC_USART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) +#endif /* FDCAN1) || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enabled_Disabled_Status AHB Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN)!= RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) != RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) != RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) != RESET) +#endif /* AES */ +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) == RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) == RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) == RESET) +#endif /* AES */ + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enabled_Disabled_Status IOPORT Clock Sleep Enabled or Disabled Status + * @brief Check whether the IOPORT clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN)!= RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN)!= RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN)!= RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN)!= RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN)!= RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN)!= RESET) + + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) == RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) == RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enabled_Disabled_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) != RESET) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) != RESET) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) != RESET) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) != RESET) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) != RESET) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) != RESET) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) != RESET) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) != RESET) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) != RESET) +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) != RESET) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) != RESET) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) != RESET) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) != RESET) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN)!= RESET) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN)!= RESET) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) != RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) != RESET) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) != RESET) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) != RESET) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) != RESET) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) != RESET) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) != RESET) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) != RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) != RESET) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) != RESET) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) != RESET) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) != RESET) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) == RESET) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) == RESET) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) == RESET) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) == RESET) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) == RESET) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) == RESET) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) == RESET) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) == RESET) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) == RESET) +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) == RESET) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) == RESET) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) == RESET) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) == RESET) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN)== RESET) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN)== RESET) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) == RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) == RESET) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) == RESET) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) == RESET) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) == RESET) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) == RESET) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) == RESET) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) == RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) == RESET) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) == RESET) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) == RESET) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) == RESET) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enabled_Disabled_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) != RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) != RESET) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) != RESET) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) != RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) != RESET) + + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) == RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) == RESET) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) == RESET) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) == RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) == RESET) + + +/** + * @} + */ + +/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset + * @{ + */ + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + * @retval None + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note As the RTC is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the RTC + * (to be done once after reset). + * @note These macros must be used after the RTC clock source was selected. + * @retval None + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** + * @} + */ + +/** @defgroup RCC_Clock_Configuration RCC Clock Configuration + * @{ + */ + +/** @brief Macros to enable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macros to disable the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 127. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_ICSCR_HSITRIM_Pos) + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI startup time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) + +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + +/** @brief Macro to configure the HSISYS clock. + * @param __HSIDIV__ specifies the HSI16 division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_HSI_DIV1 HSI clock source is divided by 1 + * @arg @ref RCC_HSI_DIV2 HSI clock source is divided by 2 + * @arg @ref RCC_HSI_DIV4 HSI clock source is divided by 4 + * @arg @ref RCC_HSI_DIV8 HSI clock source is divided by 8 + * @arg @ref RCC_HSI_DIV16 HSI clock source is divided by 16 + * @arg @ref RCC_HSI_DIV32 HSI clock source is divided by 32 + * @arg @ref RCC_HSI_DIV64 HSI clock source is divided by 64 + * @arg @ref RCC_HSI_DIV128 HSI clock source is divided by 128 + */ +#define __HAL_RCC_HSI_CONFIG(__HSIDIV__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, (__HSIDIV__)) + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0U) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0U) + +#if defined(RCC_HSI48_SUPPORT) +/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note After enabling the HSI48, the application software should wait on HSI48RDY + * flag to be set indicating that HSI48 clock is stable. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSI48ON) + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON) + +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @addtogroup RCC_RTC_Clock_Configuration + * @{ + */ + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * @retval None + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ + MODIFY_REG( RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + + +/** @brief Macro to get the RTC clock source. + * @retval The returned value can be one of the following: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + */ +#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))) + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ + +/** + * @} + */ + +/** @addtogroup RCC_Clock_Configuration + * @{ + */ + +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to configure the PLL multiplication factor. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a value of RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) + +/** + * @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * + * @param __PLLM__ specifies the division factor for PLL VCO input clock. + * This parameter must be a value of RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * + * @param __PLLP__ specifies the division factor for ADC clock. + * This parameter must be a value of @ref RCC_PLLP_Clock_Divider. + * + * @param __PLLQ__ specifies the division factor for RBG & HS Timers clocks.(1) + * This parameter must be a value of @ref RCC_PLLQ_Clock_Divider + * @note (1)__PLLQ__ parameter availability depends on devices + * @note If the USB FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the RNG needs a frequency lower than or equal to 48 MHz to work + * correctly. + * + * @param __PLLR__ specifies the division factor for the main system clock. + * This parameter must be a value of RCC_PLLR_Clock_Divider + * @note You have to set the PLL parameters correctly to not exceed 64MHZ. + * @retval None + */ +#if defined(RCC_PLLQ_SUPPORT) +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \ + ((uint32_t) (__PLLSOURCE__) | \ + (uint32_t) (__PLLM__) | \ + (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + (uint32_t) (__PLLP__) | \ + (uint32_t) (__PLLQ__) | \ + (uint32_t) (__PLLR__))) +#else +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLR), \ + ((uint32_t) (__PLLSOURCE__) | \ + (uint32_t) (__PLLM__) | \ + (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + (uint32_t) (__PLLP__) | \ + (uint32_t) (__PLLR__))) +#endif /* RCC_PLLQ_SUPPORT */ +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_NONE No oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) + +/** + * @brief Enable each clock output (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @note Enabling clock outputs RCC_PLLPCLK and RCC_PLLQCLK(*) can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLLRCLK cannot + * be stopped if used as System Clock. + * @note (*) RCC_PLLQCLK availability depends on devices + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLPCLK This clock is used to generate the clock for the ADC. + * @if defined(STM32G081xx) + * @arg @ref RCC_PLLQCLK This Clock is used to generate the clock for the High Speed Timers, + * and the random analog generator (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Disable each clock output (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @note Disabling clock outputs RCC_PLLPCLK and RCC_PLLQCLK(*) can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLLRCLK cannot + * be stopped if used as System Clock. + * @note (*) RCC_PLLQCLK availability depends on devices + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLPCLK This clock may be used to generate the clock for the ADC, I2S1. + * @if defined(STM32G081xx) + * @arg @ref RCC_PLLQCLK This Clock may be used to generate the clock for the High Speed Timers, + * and RNG (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Get clock output enable status (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked. + * This parameter can be one of the following values: + * @arg RCC_PLLPCLK This clock may be used to generate the clock for ADC, I2S1. + * @if defined(STM32G081xx) + * @arg RCC_PLLQCLK This Clock may be used to generate the clock for the HS Timers, + * the RNG (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval SET / RESET + * @note (*) RCC_PLLQCLK availability depends on devices + */ +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSI LSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSE LSE oscillator is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSI LSI used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSE LSE used as system clock source. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)) + +/** @brief Macro to configure the Microcontroller output clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee + * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP output clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ output clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO source + @if STM32G0C1xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 128 + * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 256 + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +#if defined(RCC_MCO2_SUPPORT) +/** @brief Macro to configure the Microcontroller output clock 2. + * @param __MCOCLKSOURCE__ specifies the MCO2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled + * @arg @ref RCC_MCO2SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 sourcee + * @arg @ref RCC_MCO2SOURCE_PLLCLK Main PLL clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLLPCLK PLLP output clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLLQCLK PLLQ output clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_RTCCLK RTC clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO2 source + @if STM32G0C1xx + * @arg @ref RCC_MCO2SOURCE_HSI48 HSI48 clock selected as MCO2 source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2DIV_1 MCO2 clock source is divided by 1 + * @arg @ref RCC_MCO2DIV_2 MCO2 clock source is divided by 2 + * @arg @ref RCC_MCO2DIV_4 MCO2 clock source is divided by 4 + * @arg @ref RCC_MCO2DIV_8 MCO2 clock source is divided by 8 + * @arg @ref RCC_MCO2DIV_16 MCO2 clock source is divided by 16 + * @arg @ref RCC_MCO2DIV_32 MCO2 clock source is divided by 32 + * @arg @ref RCC_MCO2DIV_64 MCO2 clock source is divided by 64 + * @arg @ref RCC_MCO2DIV_128 MCO2 clock source is divided by 128 + * @arg @ref RCC_MCO2DIV_256 MCO2 clock source is divided by 256 + * @arg @ref RCC_MCO2DIV_512 MCO2 clock source is divided by 512 + * @arg @ref RCC_MCO2DIV_1024 MCO2 clock source is divided by 1024 + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) +#endif /* RCC_MCO2_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear RCC interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PWRRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @arg @ref RCC_FLAG_PWRRST BOR or POR/PDR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#if defined(RCC_HSI48_SUPPORT) +#define __HAL_RCC_GET_FLAG(__FLAG__) \ + (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == CRRCR_REG_INDEX) ? RCC->CRRCR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR)))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U) +#else +#define __HAL_RCC_GET_FLAG(__FLAG__) \ + (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U) +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32g0xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_EnableLSECSS(void); +void HAL_RCC_DisableLSECSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* LSE & HSE CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); +void HAL_RCC_LSECSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h new file mode 100644 index 0000000..ad6ad73 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h @@ -0,0 +1,1593 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RCC_EX_H +#define STM32G0xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. + This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ +#if defined(RCC_CCIPR_USART2SEL) + uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source. + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + uint32_t Usart3ClockSelection; /*!< Specifies USART3 clock source. + This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) + uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source + This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ +#endif /* LPUART1 */ + +#if defined(LPUART2) + uint32_t Lpuart2ClockSelection; /*!< Specifies LPUART2 clock source + This parameter can be a value of @ref RCCEx_LPUART2_Clock_Source */ +#endif /* LPUART2 */ + + uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source + This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ + +#if defined(RCC_CCIPR_I2C2SEL) + uint32_t I2c2ClockSelection; /*!< Specifies I2C2 clock source + This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */ +#endif /* RCC_CCIPR_I2C2SEL */ + + uint32_t I2s1ClockSelection; /*!< Specifies I2S1 clock source + This parameter can be a value of @ref RCCEx_I2S1_Clock_Source */ +#if defined(RCC_CCIPR2_I2S2SEL) + uint32_t I2s2ClockSelection; /*!< Specifies I2S2 clock source + This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */ +#endif /* RCC_CCIPR2_I2S2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) + uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source + This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ +#endif /* RCC_CCIPR_LPTIM2SEL */ +#if defined(RNG) + uint32_t RngClockSelection; /*!< Specifies RNG clock source + This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ +#endif /* RNG */ + uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source + This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ +#if defined(CEC) + uint32_t CecClockSelection; /*!< Specifies CEC Clock clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ +#endif /* CEC */ +#if defined(RCC_CCIPR_TIM1SEL) + uint32_t Tim1ClockSelection; /*!< Specifies TIM1 Clock clock source + This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */ +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + uint32_t Tim15ClockSelection; /*!< Specifies TIM15 Clock clock source + This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */ +#endif /* RCC_CCIPR_TIM15SEL */ + uint32_t RTCClockSelection; /*!< Specifies RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ +#if defined(RCC_CCIPR2_USBSEL) + uint32_t UsbClockSelection; /*!< Specifies USB Clock clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(FDCAN1) || defined(FDCAN2) + uint32_t FdcanClockSelection; /*!< Specifies FDCAN Clock clock source + This parameter can be a value of @ref RCCEx_FDCAN_Clock_Source */ +#endif /* FDCAN1 || FDCAN2 */ +} RCC_PeriphCLKInitTypeDef; + +#if defined(CRS) + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x7F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +} RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x7F */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +} RCC_CRSSynchroInfoTypeDef; + +#endif /* CRS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source + * @{ + */ +#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ +#define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */ +/** + * @} + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_USART1 0x00000001U +#if defined(RCC_CCIPR_USART2SEL) +#define RCC_PERIPHCLK_USART2 0x00000002U +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +#define RCC_PERIPHCLK_USART3 0x00000004U +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(LPUART1) +#define RCC_PERIPHCLK_LPUART1 0x00000010U +#endif /* LPUART1 */ +#define RCC_PERIPHCLK_I2C1 0x00000020U +#if defined(RCC_CCIPR_I2C2SEL) +#define RCC_PERIPHCLK_I2C2 0x00000040U +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) +#define RCC_PERIPHCLK_LPTIM1 0x00000200U +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) +#define RCC_PERIPHCLK_LPTIM2 0x00000400U +#endif /* RCC_CCIPR_LPTIM2SEL */ +#define RCC_PERIPHCLK_I2S1 0x00000800U +#if defined(LPUART2) +#define RCC_PERIPHCLK_LPUART2 0x00001000U +#endif /* LPUART2 */ +#if defined(RCC_CCIPR2_I2S2SEL) +#define RCC_PERIPHCLK_I2S2 0x00002000U +#endif /* RCC_CCIPR2_I2S2SEL */ +#define RCC_PERIPHCLK_ADC 0x00004000U +#define RCC_PERIPHCLK_RTC 0x00020000U +#if defined(RCC_CCIPR_RNGSEL) +#define RCC_PERIPHCLK_RNG 0x00040000U +#endif /* RCC_CCIPR_RNGSEL */ +#if defined(RCC_CCIPR_CECSEL) +#define RCC_PERIPHCLK_CEC 0x00080000U +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR_TIM1SEL) +#define RCC_PERIPHCLK_TIM1 0x00200000U +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) +#define RCC_PERIPHCLK_TIM15 0x00400000U +#endif /* RCC_CCIPR_TIM15SEL */ +#if defined(RCC_CCIPR2_USBSEL) +#define RCC_PERIPHCLK_USB 0x01000000U +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(FDCAN1) || defined(FDCAN2) +#define RCC_PERIPHCLK_FDCAN 0x02000000U +#endif /* FDCAN1 || FDCAN2 */ +/** + * @} + */ + + +/** @defgroup RCCEx_USART1_Clock_Source RCC USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 /*!< SYSCLK clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 /*!< HSI clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) /*!< LSE clock selected as USART1 clock */ +/** + * @} + */ + +#if defined(RCC_CCIPR_USART2SEL) +/** @defgroup RCCEx_USART2_Clock_Source RCC USART2 Clock Source + * @{ + */ +#define RCC_USART2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0 /*!< SYSCLK clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1 /*!< HSI clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1) /*!< LSE clock selected as USART2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +/** @defgroup RCCEx_USART3_Clock_Source RCC USART3 Clock Source + * @{ + */ +#define RCC_USART3CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_SYSCLK RCC_CCIPR_USART3SEL_0 /*!< SYSCLK clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_HSI RCC_CCIPR_USART3SEL_1 /*!< HSI clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_LSE (RCC_CCIPR_USART3SEL_0 | RCC_CCIPR_USART3SEL_1) /*!< LSE clock selected as USART3 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) +/** @defgroup RCCEx_LPUART1_Clock_Source RCC LPUART1 Clock Source + * @{ + */ +#define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYSCLK clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1) /*!< LSE clock selected as LPUART1 clock */ +/** + * @} + */ +#endif /* LPUART1 */ + +#if defined(LPUART2) +/** @defgroup RCCEx_LPUART2_Clock_Source RCC LPUART2 Clock Source + * @{ + */ +#define RCC_LPUART2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_SYSCLK RCC_CCIPR_LPUART2SEL_0 /*!< SYSCLK clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_HSI RCC_CCIPR_LPUART2SEL_1 /*!< HSI clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_LSE (RCC_CCIPR_LPUART2SEL_0 | RCC_CCIPR_LPUART2SEL_1) /*!< LSE clock selected as LPUART2 clock */ +/** + * @} + */ +#endif /* LPUART2 */ + +/** @defgroup RCCEx_I2C1_Clock_Source RCC I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 /*!< SYSCLK clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1 /*!< HSI clock selected as I2C1 clock */ +/** + * @} + */ + +#if defined(RCC_CCIPR_I2C2SEL) +/** @defgroup RCCEx_I2C2_Clock_Source RCC I2C2 Clock Source + * @{ + */ +#define RCC_I2C2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C2 clock */ +#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CCIPR_I2C2SEL_0 /*!< SYSCLK clock selected as I2C2 clock */ +#define RCC_I2C2CLKSOURCE_HSI RCC_CCIPR_I2C2SEL_1 /*!< HSI clock selected as I2C2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_I2C2SEL */ + +/** @defgroup RCCEx_I2S1_Clock_Source RCC I2S1 Clock Source + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_PLL RCC_CCIPR2_I2S1SEL_0 /*!< PLL "P" selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_HSI RCC_CCIPR2_I2S1SEL_1 /*!< HSI clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR2_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ +#else +#define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_PLL RCC_CCIPR_I2S1SEL_0 /*!< PLL "P" selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_HSI RCC_CCIPR_I2S1SEL_1 /*!< HSI clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +#if defined(RCC_CCIPR2_I2S2SEL) +/** @defgroup RCCEx_I2S2_Clock_Source RCC I2S2 Clock Source + * @{ + */ +#define RCC_I2S2CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_PLL RCC_CCIPR2_I2S2SEL_0 /*!< PLL "P" selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_HSI RCC_CCIPR2_I2S2SEL_1 /*!< HSI clock selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_EXT RCC_CCIPR2_I2S2SEL /*!< External I2S clock source selected as I2S2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0 /*!< LSI clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1 /*!< HSI clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL /*!< LSE clock selected as LPTimer 1 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +/** @defgroup RCCEx_LPTIM2_Clock_Source RCC LPTIM2 Clock Source + * @{ + */ +#define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0 /*!< LSI clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1 /*!< HSI clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL /*!< LSE clock selected as LPTimer 2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(RNG) +/** @defgroup RCCEx_RNG_Clock_Source RCC RNG Clock Source + * @{ + */ +#define RCC_RNGCLKSOURCE_NONE 0x00000000U /*!< No clock selected */ +#define RCC_RNGCLKSOURCE_HSI_DIV8 RCC_CCIPR_RNGSEL_0 /*!< HSI oscillator divided by 8 clock selected as RNG clock */ +#define RCC_RNGCLKSOURCE_SYSCLK RCC_CCIPR_RNGSEL_1 /*!< SYSCLK selected as RNG clock */ +#define RCC_RNGCLKSOURCE_PLL (RCC_CCIPR_RNGSEL_0|RCC_CCIPR_RNGSEL_1) /*!< PLL "Q" selected as RNG clock */ + +/** + * @} + */ + +/** @defgroup RCCEx_RNG_Division_factor RCC RNG Division factor + * @{ + */ +#define RCC_RNGCLK_DIV1 0x00000000U /*!< RNG clock not divided */ +#define RCC_RNGCLK_DIV2 RCC_CCIPR_RNGDIV_0 /*!< RNG clock divided by 2 */ +#define RCC_RNGCLK_DIV4 RCC_CCIPR_RNGDIV_1 /*!< RNG clock divided by 4 */ +#define RCC_RNGCLK_DIV8 (RCC_CCIPR_RNGDIV_0|RCC_CCIPR_RNGDIV_1) /*!< RNG clock divided by 8 */ + +/** + * @} + */ +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCCEx_FDCAN_Clock_Source RCC FDCAN Clock Source + * @{ + */ +#define RCC_FDCANCLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 selected as FDCAN clock */ +#define RCC_FDCANCLKSOURCE_PLL RCC_CCIPR2_FDCANSEL_0 /*!< PLL "Q" selected as FDCAN clock */ +#define RCC_FDCANCLKSOURCE_HSE RCC_CCIPR2_FDCANSEL_1 /*!< HSE oscillator clock selected as FDCAN clock */ + +/** + * @} + */ +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RCC_CCIPR2_USBSEL) +/** @defgroup RCCEx_USB_Clock_Source USB Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_USBCLKSOURCE_HSI48 0x00000000U /*!< HSI48 oscillator clock selected as USB clock */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_USBCLKSOURCE_HSE RCC_CCIPR2_USBSEL_0 /*!< HSE oscillator clock selected as USB clock */ +#define RCC_USBCLKSOURCE_PLL RCC_CCIPR2_USBSEL_1 /*!< PLL "Q" selected as USB clock */ +/** + * @} + */ +#endif /* RCC_CCIPR2_USBSEL */ + +/** @defgroup RCCEx_ADC_Clock_Source RCC ADC Clock Source + * @{ + */ + +#define RCC_ADCCLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define RCC_ADCCLKSOURCE_PLLADC RCC_CCIPR_ADCSEL_0 /*!< PLL "P" (PLLADC) used as ADC clock */ +#define RCC_ADCCLKSOURCE_HSI RCC_CCIPR_ADCSEL_1 /*!< HSI used as ADC clock */ +/** + * @} + */ + +#if defined(CEC) +/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source + * @{ + */ +#define RCC_CECCLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as default CEC clock */ +#define RCC_CECCLKSOURCE_LSE RCC_CCIPR_CECSEL /*!< LSE oscillator clock used as CEC clock */ +/** + * @} + */ +#endif /* CEC */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCCEx_TIM1_Clock_Source RCC TIM1 Clock Source + * @{ + */ +#define RCC_TIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 1 clock */ +#define RCC_TIM1CLKSOURCE_PLL RCC_CCIPR_TIM1SEL /*!< PLL "Q" clock selected as Timer 1 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @defgroup RCCEx_TIM15_Clock_Source RCC TIM15 Clock Source + * @{ + */ +#define RCC_TIM15CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 15 clock */ +#define RCC_TIM15CLKSOURCE_PLL RCC_CCIPR_TIM15SEL /*!< PLL "Q" clock selected as Timer 15 clock */ + +/** + * @} + */ +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Status RCCEx CRS Status + * @{ + */ +#define RCC_CRS_NONE 0x00000000U +#define RCC_CRS_TIMEOUT 0x00000001U +#define RCC_CRS_SYNCOK 0x00000002U +#define RCC_CRS_SYNCWARN 0x00000004U +#define RCC_CRS_SYNCERR 0x00000008U +#define RCC_CRS_SYNCMISS 0x00000010U +#define RCC_CRS_TRIMOVF 0x00000020U +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault + * @{ + */ +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U /*!< The default value is 64, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value + corresponds to a higher output frequency */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL))) + +#if defined(RCC_CCIPR_I2C2SEL) +/** @brief Macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__)) + +/** @brief Macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C2SEL))) +#endif /* RCC_CCIPR_I2C2SEL */ + +/** @brief Macro to configure the I2S1 clock (I2S1CLK). + * + * @param __I2S1_CLKSOURCE__ specifies the I2S1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) +#else +#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** @brief Macro to get the I2S1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL))) +#else +#define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2S1SEL))) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_CCIPR2_I2S2SEL) +/** @brief Macro to configure the I2S2 clock (I2S2CLK). + * + * @param __I2S2_CLKSOURCE__ specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK System Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_PLL PLLP Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_HSI HSI Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_EXT External clock selected as I2S2 clock + */ +#define __HAL_RCC_I2S2_CONFIG(__I2S2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL, (uint32_t)(__I2S2_CLKSOURCE__)) + +/** @brief Macro to get the I2S2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK System Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_PLL PLLP Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_HSI HSI Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_EXT External clock selected as I2S2 clock + */ +#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL))) +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL))) + +#if defined(RCC_CCIPR_USART2SEL) +/** @brief Macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__)) + +/** @brief Macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL))) +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) +/** @brief Macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3_CLKSOURCE__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__)) + +/** @brief Macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART3SEL))) +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(RCC_CCIPR_LPUART1SEL) +/** @brief Macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__)) + +/** @brief Macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL))) +#endif /* RCC_CCIPR_LPUART1SEL */ + +#if defined(RCC_CCIPR_LPUART2SEL) +/** @brief Macro to configure the LPUART2 clock (LPUART2CLK). + * + * @param __LPUART2_CLKSOURCE__ specifies the LPUART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART2CLKSOURCE_PCLK1 PCLK1 selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_HSI HSI selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_SYSCLK System Clock selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_LSE LSE selected as LPUART2 clock + */ +#define __HAL_RCC_LPUART2_CONFIG(__LPUART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART2SEL, (uint32_t)(__LPUART2_CLKSOURCE__)) + +/** @brief Macro to get the LPUART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART2CLKSOURCE_PCLK1 PCLK1 selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_HSI HSI selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_SYSCLK System Clock selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_LSE LSE selected as LPUART2 clock + */ +#define __HAL_RCC_GET_LPUART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART2SEL))) +#endif /* RCC_CCIPR_LPUART2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). + * + * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock + */ +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL))) +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +/** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK). + * + * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + */ +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + */ +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL))) +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(CEC) +/** @brief Macro to configure the CEC clock (CECCLK). + * + * @param __CEC_CLKSOURCE__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, (uint32_t)(__CEC_CLKSOURCE__)) + +/** @brief Macro to get the CEC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 Clock selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_CECSEL))) +#endif /* CEC */ + +#if defined(RNG) +/** @brief Macro to configure the RNG clock. + * + * + * @param __RNG_CLKSOURCE__ specifies the RNG clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divided by 8 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System Clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock + */ +#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, (uint32_t)(__RNG_CLKSOURCE__)) + +/** @brief Macro to get the RNG clock. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divide by 8 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock + */ +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGSEL))) + +/** @brief Macro to configure the RNG clock. + * + * + * @param __RNG_CLKDIV__ specifies the RNG clock division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided + * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 + * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 + * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 + */ +#define __HAL_RCC_RNGDIV_CONFIG(__RNG_CLKDIV__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, (uint32_t)(__RNG_CLKDIV__)) + +/** @brief Macro to get the RNG clock division factor. + * @retval The division factor can be one of the following values: + * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided + * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 + * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 + * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 + */ +#define __HAL_RCC_GET_RNG_DIV() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV))) +#endif /* RNG */ + +/** @brief Macro to configure the ADC interface clock + * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock + */ +#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__)) + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL))) + +#if defined(RCC_CCIPR_TIM1SEL) +/** @brief Macro to configure the TIM1 interface clock + * @param __TIM1_CLKSOURCE__ specifies the TIM1 digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock + * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock + */ +#define __HAL_RCC_TIM1_CONFIG(__TIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM1SEL, (uint32_t)(__TIM1_CLKSOURCE__)) + +/** @brief Macro to get the TIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock + * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock + */ +#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM1SEL))) +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @brief Macro to configure the TIM15 interface clock + * @param __TIM15_CLKSOURCE__ specifies the TIM15 digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock + * @arg RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock + */ +#define __HAL_RCC_TIM15_CONFIG(__TIM15_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM15SEL, (uint32_t)(__TIM15_CLKSOURCE__)) + +/** @brief Macro to get the TIM15 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock + * @arg @ref RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock + */ +#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM15SEL))) +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(RCC_CCIPR2_USBSEL) +/** @brief Macro to configure the USB interface clock + * @param __USB_CLKSOURCE__ specifies the USB digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL PLLQ Output Clock selected as USB clock (*) + * @arg @ref RCC_USBCLKSOURCE_HSE HSE Output Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 Clock selected as USB clock (*) + * (*) Feature not available on all devices + */ +#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, (uint32_t)(__USB_CLKSOURCE__)) + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_HSE HSE Output Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL PLLQ Output Clock selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_USBSEL))) +#endif /* RCC_CCIPR2_USBSEL */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @brief Macro to configure the FDCAN interface clock + * @param __FDCAN_CLKSOURCE__ specifies the FDCAN digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_PLL PLLQ Output Clock selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PCLK1 System Clock selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_HSE HSE Clock selected as FDCAN clock + */ +#define __HAL_RCC_FDCAN_CONFIG(__FDCAN_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, (uint32_t)(__FDCAN_CLKSOURCE__)) + +/** @brief Macro to get the FDCAN clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_FDCANCLKSOURCE_PLL PLLQ Output Clock selected as FDCAN clock + * @arg @ref RCC_FDCANCLKSOURCE_PCLK1 System Clock selected as FDCAN clock + * @arg @ref RCC_FDCANCLKSOURCE_HSE HSE Clock selected as FDCAN clock + */ +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL))) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(CRS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +#endif /* CRS */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after prescaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +#endif /* CRS */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); +void HAL_RCCEx_DisableLSCO(void); + +/** + * @} + */ + +#if defined(CRS) + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ + +#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) + +#if defined(STM32G0C1xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G0B1xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G0B0xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + +#elif defined(STM32G081xx) +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) +#elif defined(STM32G071xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G070xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) + +#elif defined(STM32G061xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G051xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G041xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) + +#elif defined(STM32G031xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) + +#elif defined(STM32G030xx) || defined(STM32G050xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) +#endif /* STM32G0C1xx */ + +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) + +#if defined(RCC_CCIPR_USART2SEL) +#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI)) +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) +#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI)) +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) +#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) +#endif /* LPUART1 */ + +#if defined(LPUART2) +#define IS_RCC_LPUART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_HSI)) +#endif /* LPUART2 */ + +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) + +#if defined(RCC_CCIPR_I2C2SEL) +#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI)) + +#endif /* RCC_CCIPR_I2C2SEL */ + +#define IS_RCC_I2S1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2S1CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_EXT)) + +#if defined(RCC_CCIPR2_I2S2SEL) +#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_EXT)) +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +#define IS_RCC_LPTIM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1)|| \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE)) +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +#define IS_RCC_LPTIM2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1)|| \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_PLLADC) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI)) + +#if defined(RNG) +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_HSI_DIV8) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL)) +#define IS_RCC_RNGDIV(__DIV__) \ + (((__DIV__) == RCC_RNGCLK_DIV1) || \ + ((__DIV__) == RCC_RNGCLK_DIV2) || \ + ((__DIV__) == RCC_RNGCLK_DIV4) || \ + ((__DIV__) == RCC_RNGCLK_DIV8)) +#endif /* RNG */ + +#if defined(CEC) +#define IS_RCC_CECCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_CECCLKSOURCE_HSI_DIV488)|| \ + ((__SOURCE__) == RCC_CECCLKSOURCE_LSE)) +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_RCC_FDCANCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE)|| \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL)|| \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PCLK1)) + +#endif /* FDCAN1 */ + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48)|| \ + ((__SOURCE__) == RCC_USBCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL)) +#else +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSE)|| \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL)) +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_CCIPR_TIM1SEL) +#define IS_RCC_TIM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_TIM1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_TIM1CLKSOURCE_PCLK1)) +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +#define IS_RCC_TIM15CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_TIM15CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_TIM15CLKSOURCE_PCLK1)) +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(CRS) + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x7FU)) + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RCC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rng.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rng.h new file mode 100644 index 0000000..1f0a93e --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rng.h @@ -0,0 +1,380 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rng.h + * @author MCD Application Team + * @brief Header file of RNG HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RNG_H +#define STM32G0xx_HAL_RNG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @defgroup RNG RNG + * @brief RNG HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RNG_Exported_Types RNG Exported Types + * @{ + */ + +/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition + * @{ + */ +typedef struct +{ + uint32_t ClockErrorDetection; /*!< CED Clock error detection */ +} RNG_InitTypeDef; + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition + * @{ + */ +typedef enum +{ + HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */ + HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */ + HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */ + HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */ + HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */ + +} HAL_RNG_StateTypeDef; + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition + * @{ + */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +typedef struct __RNG_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_RNG_REGISTER_CALLBACKS) */ +{ + RNG_TypeDef *Instance; /*!< Register base address */ + + RNG_InitTypeDef Init; /*!< RNG configuration parameters */ + + HAL_LockTypeDef Lock; /*!< RNG locking object */ + + __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */ + + __IO uint32_t ErrorCode; /*!< RNG Error code */ + + uint32_t RandomNumber; /*!< Last Generated RNG Data */ + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + void (* ReadyDataCallback)(struct __RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< RNG Data Ready Callback */ + void (* ErrorCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Error Callback */ + + void (* MspInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp Init callback */ + void (* MspDeInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp DeInit callback */ +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +} RNG_HandleTypeDef; + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RNG Callback ID enumeration definition + */ +typedef enum +{ + HAL_RNG_ERROR_CB_ID = 0x00U, /*!< RNG Error Callback ID */ + + HAL_RNG_MSPINIT_CB_ID = 0x01U, /*!< RNG MspInit callback ID */ + HAL_RNG_MSPDEINIT_CB_ID = 0x02U /*!< RNG MspDeInit callback ID */ + +} HAL_RNG_CallbackIDTypeDef; + +/** + * @brief HAL RNG Callback pointer definition + */ +typedef void (*pRNG_CallbackTypeDef)(RNG_HandleTypeDef *hrng); /*!< pointer to a common RNG callback function */ +typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< pointer to an RNG Data Ready specific callback function */ + +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_Exported_Constants RNG Exported Constants + * @{ + */ + +/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition + * @{ + */ +#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */ +#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */ +#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */ +/** + * @} + */ + +/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition + * @{ + */ +#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */ +#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */ +#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */ +/** + * @} + */ + +/** @defgroup RNG_Exported_Constants_Group3 RNG Clock Error Detection + * @{ + */ +#define RNG_CED_ENABLE 0x00000000U /*!< Clock error detection Enabled */ +#define RNG_CED_DISABLE RNG_CR_CED /*!< Clock error detection Disabled */ +/** + * @} + */ + +/** @defgroup RNG_Error_Definition RNG Error Definition + * @{ + */ +#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */ +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ +#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */ +#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */ +#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */ +#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RNG_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @brief Reset RNG handle state + * @param __HANDLE__ RNG Handle + * @retval None + */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_RNG_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET) +#endif /*USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @brief Enables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN) + +/** + * @brief Disables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN) + +/** + * @brief Check the selected RNG flag status. + * @param __HANDLE__ RNG Handle + * @param __FLAG__ RNG flag + * This parameter can be one of the following values: + * @arg RNG_FLAG_DRDY: Data ready + * @arg RNG_FLAG_CECS: Clock error current status + * @arg RNG_FLAG_SECS: Seed error current status + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clears the selected RNG flag status. + * @param __HANDLE__ RNG handle + * @param __FLAG__ RNG flag to clear + * @note WARNING: This is a dummy macro for HAL code alignment, + * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only. + * @retval None + */ +#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */ + +/** + * @brief Enables the RNG interrupts. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE) + +/** + * @brief Disables the RNG interrupts. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE) + +/** + * @brief Checks whether the specified RNG interrupt has occurred or not. + * @param __HANDLE__ RNG Handle + * @param __INTERRUPT__ specifies the RNG interrupt status flag to check. + * This parameter can be one of the following values: + * @arg RNG_IT_DRDY: Data ready interrupt + * @arg RNG_IT_CEI: Clock error interrupt + * @arg RNG_IT_SEI: Seed error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clear the RNG interrupt status flags. + * @param __HANDLE__ RNG Handle + * @param __INTERRUPT__ specifies the RNG interrupt status flag to clear. + * This parameter can be one of the following values: + * @arg RNG_IT_CEI: Clock error interrupt + * @arg RNG_IT_SEI: Seed error interrupt + * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY. + * @retval None + */ +#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_Exported_Functions RNG Exported Functions + * @{ + */ + +/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions + * @{ + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng); +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit); +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng); +uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng); + +void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng); +void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng); +void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit); + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng); +uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RNG_Private_Macros RNG Private Macros + * @{ + */ +#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \ + ((IT) == RNG_IT_SEI)) + +#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \ + ((FLAG) == RNG_FLAG_CECS) || \ + ((FLAG) == RNG_FLAG_SECS)) + +/** + * @brief Verify the RNG Clock Error Detection mode. + * @param __MODE__ RNG Clock Error Detection mode + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_RNG_CED(__MODE__) (((__MODE__) == RNG_CED_ENABLE) || \ + ((__MODE__) == RNG_CED_DISABLE)) +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_RNG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h new file mode 100644 index 0000000..d81399f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h @@ -0,0 +1,967 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc.h + * @author MCD Application Team + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RTC_H +#define STM32G0xx_HAL_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RTC RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ + +}HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. + This parameter can be a value of @ref RTCEx_Output_selection_Definitions */ + + uint32_t OutPutRemap; /*!< Specifies the remap for RTC output. + This parameter can be a value of @ref RTC_Output_ALARM_OUT_Remap */ + + uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. + This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ + + uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. + This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ + + uint32_t OutPutPullUp; /*!< Specifies the RTC Output Pull-Up mode. + This parameter can be a value of @ref RTC_Output_PullUp_ALARM_OUT */ +}RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ + + uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity */ + + uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content + corresponding to Synchronous pre-scaler factor value (PREDIV_S) + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity. + This field will be used only by HAL_RTC_GetTime function */ + + uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment. + This parameter can be a value of @ref RTC_DayLightSaving_Definitions */ + + uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BKP bit + in CR register to store the operation. + This parameter can be a value of @ref RTC_StoreOperation_Definitions */ +}RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ + +}RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. + This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range. + If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint32_t Alarm; /*!< Specifies the alarm . + This parameter can be a value of @ref RTC_Alarms_Definitions */ +}RTC_AlarmTypeDef; + +/** + * @brief RTC Handle Structure definition + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +typedef struct __RTC_HandleTypeDef +#else +typedef struct +#endif +{ + RTC_TypeDef *Instance; /*!< Register base address */ + + uint32_t TampOffset; /*!< Offset to TAMP instance */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + void (* AlarmAEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Alarm A Event callback */ + + void (* AlarmBEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Alarm B Event callback */ + + void (* TimeStampEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC TimeStamp Event callback */ + + void (* WakeUpTimerEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC WakeUpTimer Event callback */ + + void (* Tamper1EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 1 Event callback */ + + void (* Tamper2EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 2 Event callback */ + +#if defined(TAMP_CR1_TAMP3E) + void (* Tamper3EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 3 Event callback */ +#endif + + void (* InternalTamper3EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 3 Event callback */ + + void (* InternalTamper4EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 4 Event callback */ + + void (* InternalTamper5EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 5 Event callback */ + + void (* InternalTamper6EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 6 Event callback */ + + + void (* MspInitCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Msp Init callback */ + + void (* MspDeInitCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Msp DeInit callback */ + +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + +}RTC_HandleTypeDef; + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RTC Callback ID enumeration definition + */ +typedef enum +{ + HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00U, /*!< RTC Alarm A Event Callback ID */ + HAL_RTC_ALARM_B_EVENT_CB_ID = 0x01U, /*!< RTC Alarm B Event Callback ID */ + HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02U, /*!< RTC TimeStamp Event Callback ID */ + HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03U, /*!< RTC WakeUp Timer Event Callback ID */ + HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04U, /*!< RTC Tamper 1 Callback ID */ + HAL_RTC_TAMPER2_EVENT_CB_ID = 0x05U, /*!< RTC Tamper 2 Callback ID */ +#if defined(TAMP_CR1_TAMP3E) + HAL_RTC_TAMPER3_EVENT_CB_ID = 0x06U, /*!< RTC Tamper 3 Callback ID */ +#endif + HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID = 0x09U, /*!< RTC Internal Tamper 3 Callback ID */ + HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID = 0x0AU, /*!< RTC Internal Tamper 4 Callback ID */ + HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID = 0x0BU, /*!< RTC Internal Tamper 5 Callback ID */ + HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID = 0x0CU, /*!< RTC Internal Tamper 6 Callback ID */ + HAL_RTC_MSPINIT_CB_ID = 0x0EU, /*!< RTC Msp Init callback ID */ + HAL_RTC_MSPDEINIT_CB_ID = 0x0FU /*!< RTC Msp DeInit callback ID */ +}HAL_RTC_CallbackIDTypeDef; + +/** + * @brief HAL RTC Callback pointer definition + */ +typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef * hrtc); /*!< pointer to an RTC callback function */ +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Hour_Formats RTC Hour Formats + * @{ + */ +#define RTC_HOURFORMAT_24 0x00000000u +#define RTC_HOURFORMAT_12 RTC_CR_FMT +/** + * @} + */ + +/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition + * @{ + */ +#define RTC_OUTPUT_DISABLE 0x00000000u +#define RTC_OUTPUT_ALARMA RTC_CR_OSEL_0 +#define RTC_OUTPUT_ALARMB RTC_CR_OSEL_1 +#define RTC_OUTPUT_WAKEUP RTC_CR_OSEL +#define RTC_OUTPUT_TAMPER RTC_CR_TAMPOE +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions + * @{ + */ +#define RTC_OUTPUT_POLARITY_HIGH 0x00000000u +#define RTC_OUTPUT_POLARITY_LOW RTC_CR_POL +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT + * @{ + */ +#define RTC_OUTPUT_TYPE_PUSHPULL 0x00000000u +#define RTC_OUTPUT_TYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE +/** + * @} + */ + +/** @defgroup RTC_Output_PullUp_ALARM_OUT RTC Output Pull-Up ALARM OUT + * @{ + */ +#define RTC_OUTPUT_PULLUP_NONE 0x00000000u +#define RTC_OUTPUT_PULLUP_ON RTC_CR_TAMPALRM_PU +/** + * @} + */ + +/** @defgroup RTC_Output_ALARM_OUT_Remap RTC Output ALARM OUT Remap + * @{ + */ +#define RTC_OUTPUT_REMAP_NONE 0x00000000u +#define RTC_OUTPUT_REMAP_POS1 RTC_CR_OUT2EN +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions + * @{ + */ +#define RTC_HOURFORMAT12_AM 0x0u +#define RTC_HOURFORMAT12_PM 0x1u +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions + * @{ + */ +#define RTC_DAYLIGHTSAVING_SUB1H RTC_CR_SUB1H +#define RTC_DAYLIGHTSAVING_ADD1H RTC_CR_ADD1H +#define RTC_DAYLIGHTSAVING_NONE 0x00000000u +/** + * @} + */ + +/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions + * @{ + */ +#define RTC_STOREOPERATION_RESET 0x00000000u +#define RTC_STOREOPERATION_SET RTC_CR_BKP +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions + * @{ + */ +#define RTC_FORMAT_BIN 0x00000000u +#define RTC_FORMAT_BCD 0x00000001u +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01U) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02U) +#define RTC_MONTH_MARCH ((uint8_t)0x03U) +#define RTC_MONTH_APRIL ((uint8_t)0x04U) +#define RTC_MONTH_MAY ((uint8_t)0x05U) +#define RTC_MONTH_JUNE ((uint8_t)0x06U) +#define RTC_MONTH_JULY ((uint8_t)0x07U) +#define RTC_MONTH_AUGUST ((uint8_t)0x08U) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10U) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11U) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12U) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) + +/** + * @} + */ + +/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions + * @{ + */ +#define RTC_ALARMDATEWEEKDAYSEL_DATE 0x00000000u +#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL + +/** + * @} + */ + +/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions + * @{ + */ +#define RTC_ALARMMASK_NONE 0x00000000u +#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 +#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 +#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 +#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 +#define RTC_ALARMMASK_ALL (RTC_ALARMMASK_NONE | RTC_ALARMMASK_DATEWEEKDAY | \ + RTC_ALARMMASK_HOURS | RTC_ALARMMASK_MINUTES | \ + RTC_ALARMMASK_SECONDS) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions + * @{ + */ +#define RTC_ALARM_A RTC_CR_ALRAE +#define RTC_ALARM_B RTC_CR_ALRBE + +/** + * @} + */ + + + /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions + * @{ + */ +#define RTC_ALARMSUBSECONDMASK_ALL 0x00000000u /*!< All Alarm SS fields are masked. + There is no comparison on sub seconds + for Alarm */ +#define RTC_ALARMSUBSECONDMASK_SS14_1 RTC_ALRMASSR_MASKSS_0 /*!< SS[14:1] not used in Alarm + comparison. Only SS[0] is compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_2 RTC_ALRMASSR_MASKSS_1 /*!< SS[14:2] not used in Alarm + comparison. Only SS[1:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_3 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1) /*!< SS[14:3] not used in Alarm + comparison. Only SS[2:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_4 RTC_ALRMASSR_MASKSS_2 /*!< SS[14:4] not used in Alarm + comparison. Only SS[3:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_5 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:5] not used in Alarm + comparison. Only SS[4:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_6 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:6] not used in Alarm + comparison. Only SS[5:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_7 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:7] not used in Alarm + comparison. Only SS[6:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_8 RTC_ALRMASSR_MASKSS_3 /*!< SS[14:8] not used in Alarm + comparison. Only SS[7:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_9 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:9] not used in Alarm + comparison. Only SS[8:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_10 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:10] not used in Alarm + comparison. Only SS[9:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_11 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:11] not used in Alarm + comparison. Only SS[10:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_12 (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:12] not used in Alarm + comparison.Only SS[11:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_13 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:13] not used in Alarm + comparison. Only SS[12:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14] not used in Alarm + comparison.Only SS[13:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_NONE RTC_ALRMASSR_MASKSS /*!< SS[14:0] are compared and must match + to activate alarm. */ +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions + * @{ + */ +#define RTC_IT_TS RTC_CR_TSIE /*!< Enable Timestamp Interrupt */ +#define RTC_IT_WUT RTC_CR_WUTIE /*!< Enable Wakeup timer Interrupt */ +#define RTC_IT_ALRA RTC_CR_ALRAIE /*!< Enable Alarm A Interrupt */ +#define RTC_IT_ALRB RTC_CR_ALRBIE /*!< Enable Alarm B Interrupt */ +/** + * @} + */ + +/** @defgroup RTC_Flag_Mask RTC Flag Mask (5bits) describe in RTC_Flags_Definitions + * @{ + */ +#define RTC_FLAG_MASK 0x001Fu /*!< RTC flags mask (5bits) */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions RTC Flags Definitions + * Elements values convention: 000000XX000YYYYYb + * - YYYYY : Interrupt flag position in the XX register (5bits) + * - XX : Interrupt status register (2bits) + * - 01: ICSR register + * - 10: SR or SCR or MISR or SMISR registers + * @{ + */ +#define RTC_FLAG_RECALPF (0x00000100U | RTC_ICSR_RECALPF_Pos) /*!< Recalibration pending Flag */ +#define RTC_FLAG_INITF (0x00000100U | RTC_ICSR_INITF_Pos) /*!< Initialization flag */ +#define RTC_FLAG_RSF (0x00000100U | RTC_ICSR_RSF_Pos) /*!< Registers synchronization flag */ +#define RTC_FLAG_INITS (0x00000100U | RTC_ICSR_INITS_Pos) /*!< Initialization status flag */ +#define RTC_FLAG_SHPF (0x00000100U | RTC_ICSR_SHPF_Pos) /*!< Shift operation pending flag */ +#define RTC_FLAG_WUTWF (0x00000100U | RTC_ICSR_WUTWF_Pos) /*!< Wakeup timer write flag */ +#define RTC_FLAG_ALRBWF (0x00000100U | RTC_ICSR_ALRBWF_Pos) /*!< Alarm B write flag */ +#define RTC_FLAG_ALRAWF (0x00000100U | RTC_ICSR_ALRAWF_Pos) /*!< Alarm A write flag */ +#define RTC_FLAG_ITSF (0x00000200U | RTC_SR_ITSF_Pos) /*!< Internal Time-stamp flag */ +#define RTC_FLAG_TSOVF (0x00000200U | RTC_SR_TSOVF_Pos) /*!< Time-stamp overflow flag */ +#define RTC_FLAG_TSF (0x00000200U | RTC_SR_TSF_Pos) /*!< Time-stamp flag */ +#define RTC_FLAG_WUTF (0x00000200U | RTC_SR_WUTF_Pos) /*!< Wakeup timer flag */ +#define RTC_FLAG_ALRBF (0x00000200U | RTC_SR_ALRBF_Pos) /*!< Alarm B flag */ +#define RTC_FLAG_ALRAF (0x00000200U | RTC_SR_ALRAF_Pos) /*!< Alarm A flag */ +/** + * @} + */ + +/** @defgroup RTC_Clear_Flags_Definitions RTC Clear Flags Definitions + * @{ + */ +#define RTC_CLEAR_ITSF RTC_SCR_CITSF /*!< Clear Internal Time-stamp flag */ +#define RTC_CLEAR_TSOVF RTC_SCR_CTSOVF /*!< Clear Time-stamp overflow flag */ +#define RTC_CLEAR_TSF RTC_SCR_CTSF /*!< Clear Time-stamp flag */ +#define RTC_CLEAR_WUTF RTC_SCR_CWUTF /*!< Clear Wakeup timer flag */ +#define RTC_CLEAR_ALRBF RTC_SCR_CALRBF /*!< Clear Alarm B flag */ +#define RTC_CLEAR_ALRAF RTC_SCR_CALRAF /*!< Clear Alarm A flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTC_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__ RTC handle. + * @retval None + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_RTC_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0) +#else +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xCAU; \ + (__HANDLE__)->Instance->WPR = 0x53U; \ + } while(0U) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xFFU; \ + } while(0U) + +/** + * @brief Add 1 hour (summer time change). + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_ADD1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_ADD1H); \ + MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + +/** + * @brief Subtract 1 hour (winter time change). + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_SUB1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_SUB1H); \ + MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + + /** + * @brief Enable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE)) + +/** + * @brief Disable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE)) + +/** + * @brief Enable the RTC ALARMB peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE)) + +/** + * @brief Disable the RTC ALARMB peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE)) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt, @ref RTC_Interrupts_Definitions + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->SR)& ((__INTERRUPT__)>> 12U)) != 0U)? 1U : 0U) + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC Alarms flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to check. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @arg @ref RTC_FLAG_ALRBF + * @arg @ref RTC_FLAG_ALRAWF + * @arg @ref RTC_FLAG_ALRBWF + * @retval None + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) + +/** + * @brief Clear the RTC Alarms pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @arg @ref RTC_FLAG_ALRBF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == RTC_FLAG_ALRAF) ? (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ALRAF)) : \ + (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ALRBF))) + +/** + * @brief Enable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Enable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @} + */ + +/* Include RTC HAL Extended module */ +#include "stm32g0xx_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); + +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions + * @{ + */ +/* RTC Time and Date functions ************************************************/ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions + * @{ + */ +/* RTC Alarm functions ********************************************************/ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_TR_RESERVED_MASK (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | \ + RTC_TR_MNT | RTC_TR_MNU| RTC_TR_ST | \ + RTC_TR_SU) +#define RTC_DR_RESERVED_MASK (RTC_DR_YT | RTC_DR_YU | RTC_DR_WDU | \ + RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | \ + RTC_DR_DU) +#define RTC_INIT_MASK 0xFFFFFFFFu +#define RTC_RSF_MASK (~(RTC_ICSR_INIT | RTC_ICSR_RSF)) + +#define RTC_TIMEOUT_VALUE 1000u + +#define RTC_EXTI_LINE_ALARM_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Alarm event */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTC_Private_Macros RTC Private Macros + * @{ + */ + +/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters + * @{ + */ +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMB) || \ + ((OUTPUT) == RTC_OUTPUT_WAKEUP) || \ + ((OUTPUT) == RTC_OUTPUT_TAMPER)) + +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ + ((FORMAT) == RTC_HOURFORMAT_24)) + +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ + ((POL) == RTC_OUTPUT_POLARITY_LOW)) + +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ + ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) + +#define IS_RTC_OUTPUT_PULLUP(TYPE) (((TYPE) == RTC_OUTPUT_PULLUP_NONE) || \ + ((TYPE) == RTC_OUTPUT_PULLUP_ON)) + +#define IS_RTC_OUTPUT_REMAP(REMAP) (((REMAP) == RTC_OUTPUT_REMAP_NONE) || \ + ((REMAP) == RTC_OUTPUT_REMAP_POS1)) + +#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \ + ((PM) == RTC_HOURFORMAT12_PM)) + +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) + +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ + ((OPERATION) == RTC_STOREOPERATION_SET)) + +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || \ + ((FORMAT) == RTC_FORMAT_BCD)) + +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99u) + +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1u) && ((MONTH) <= 12u)) + +#define IS_RTC_DATE(DATE) (((DATE) >= 1u) && ((DATE) <= 31u)) + +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >0u) && ((DATE) <= 31u)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ + ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) + +#define IS_RTC_ALARM_MASK(MASK) (((MASK) & ~(RTC_ALARMMASK_ALL)) == 0U) + +#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || \ + ((ALARM) == RTC_ALARM_B)) + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS) + +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_NONE)) + +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7Fu) + +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFFu) + +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0u) && ((HOUR) <= 12u)) + +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23u) + +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59u) + +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59u) + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------*/ +/** @defgroup RTC_Private_Functions RTC Private Functions + * @{ + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc); +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc); +uint8_t RTC_ByteToBcd2(uint8_t Value); +uint8_t RTC_Bcd2ToByte(uint8_t Value); +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RTC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h new file mode 100644 index 0000000..a575d5d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h @@ -0,0 +1,1157 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc_ex.h + * @author MCD Application Team + * @brief Header file of RTC HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RTC_EX_H +#define STM32G0xx_HAL_RTC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RTCEx RTCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Types RTCEx Exported Types + * @{ + */ + +/** @defgroup RTCEx_Tamper_structure_definition RTCEx Tamper structure definition + * @{ + */ +typedef struct +{ + uint32_t Tamper; /*!< Specifies the Tamper Pin. + This parameter can be a value of @ref RTCEx_Tamper_Pins */ + + uint32_t Trigger; /*!< Specifies the Tamper Trigger. + This parameter can be a value of @ref RTCEx_Tamper_Trigger */ + + uint32_t NoErase; /*!< Specifies the Tamper no erase mode. + This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */ + + uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. + This parameter can be a value of @ref RTCEx_Tamper_MaskFlag */ + + uint32_t Filter; /*!< Specifies the TAMP Filter Tamper. + This parameter can be a value of @ref RTCEx_Tamper_Filter */ + + uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. + This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies */ + + uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . + This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration */ + + uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . + This parameter can be a value of @ref RTCEx_Tamper_Pull_UP */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ +}RTC_TamperTypeDef; +/** + * @} + */ + + +/** @defgroup RTCEx_Internal_Tamper_structure_definition RTCEx Internal Tamper structure definition + * @{ + */ +typedef struct +{ + uint32_t IntTamper; /*!< Specifies the Internal Tamper Pin. + This parameter can be a value of @ref RTCEx_Internal_Tamper_Pins */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ +} RTC_InternalTamperTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants + * @{ + */ + +/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition + * @{ + */ +#define RTC_TIMESTAMPEDGE_RISING 0x00000000u +#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE +/** + * @} + */ + +/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection + * @{ + */ +#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000u +/** + * @} + */ + +/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions + * @{ + */ +#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000u +#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) +#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 +#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000u /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 32s, else 2exp20 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 16s, else 2exp19 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 8s, else 2exp18 RTCCLK pulses */ +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0] + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000u /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0] */ + +/** + * @} + */ + /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions + * @{ + */ +#define RTC_CALIBOUTPUT_512HZ 0x00000000u +#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL + +/** + * @} + */ + + +/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions + * @{ + */ +#define RTC_SHIFTADD1S_RESET 0x00000000u +#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pins RTCEx Tamper Pins Definition + * @{ + */ +#define RTC_TAMPER_1 TAMP_CR1_TAMP1E +#define RTC_TAMPER_2 TAMP_CR1_TAMP2E +#if defined(TAMP_CR1_TAMP3E) +#define RTC_TAMPER_3 TAMP_CR1_TAMP3E +#define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E | TAMP_CR1_TAMP3E) +#else +#define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E) +#endif +/** + * @} + */ + +/** @defgroup RTCEx_Internal_Tamper_Pins RTCEx Internal Tamper Pins Definition + * @{ + */ +#define RTC_INT_TAMPER_3 TAMP_CR1_ITAMP3E +#define RTC_INT_TAMPER_4 TAMP_CR1_ITAMP4E +#define RTC_INT_TAMPER_5 TAMP_CR1_ITAMP5E +#define RTC_INT_TAMPER_6 TAMP_CR1_ITAMP6E +#define RTC_INT_TAMPER_ALL (TAMP_CR1_ITAMP3E | TAMP_CR1_ITAMP4E | \ + TAMP_CR1_ITAMP5E | TAMP_CR1_ITAMP6E) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Trigger RTCEx Tamper Trigger + * @{ + */ +#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00u +#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x01u +#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE +#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_MaskFlag RTCEx Tamper MaskFlag + * @{ + */ +#define RTC_TAMPERMASK_FLAG_DISABLE 0x00u +#define RTC_TAMPERMASK_FLAG_ENABLE 0x01u +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_EraseBackUp RTCEx Tamper EraseBackUp +* @{ +*/ +#define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00u +#define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x01u +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Filter RTCEx Tamper Filter + * @{ + */ +#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ +#define RTC_TAMPERFILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 + consecutive samples at the active level */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Sampling_Frequencies RTCEx Tamper Sampling Frequencies + * @{ + */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 32768 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 16384 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 8192 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 4096 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 2048 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 1024 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 512 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1 | \ + TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 256 */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration RTCEx Tamper Pin Precharge Duration + * @{ + */ +#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before + sampling during 1 RTCCLK cycle */ +#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before + sampling during 2 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before + sampling during 4 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK (TAMP_FLTCR_TAMPPRCH_0 | TAMP_FLTCR_TAMPPRCH_1) /*!< Tamper pins are pre-charged before + sampling during 8 RTCCLK cycles */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pull_UP RTCEx Tamper Pull UP + * @{ + */ +#define RTC_TAMPER_PULLUP_ENABLE 0x00000000u /*!< Tamper pins are pre-charged before sampling */ +#define RTC_TAMPER_PULLUP_DISABLE TAMP_FLTCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStamp On Tamper Detection Definitions + * @{ + */ +#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000u /*!< TimeStamp on Tamper Detection event is not saved */ +#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_CR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ +/** + * @} + */ + + +/** @defgroup RTCEx_Internal_Tamper_Interrupt RTCEx Internal Tamper Interrupt + * @{ + */ +#define RTC_IT_TAMP1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */ +#define RTC_IT_TAMP2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */ +#if defined(TAMP_CR1_TAMP3E) +#define RTC_IT_TAMP3 TAMP_IER_TAMP3IE /*!< Tamper 3 Interrupt */ +#define RTC_IT_TAMPALL (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE | TAMP_IER_TAMP3IE) +#else +#define RTC_IT_TAMPALL (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE) +#endif + +#define RTC_IT_INT_TAMP3 TAMP_IER_ITAMP3IE +#define RTC_IT_INT_TAMP4 TAMP_IER_ITAMP4IE +#define RTC_IT_INT_TAMP5 TAMP_IER_ITAMP5IE +#define RTC_IT_INT_TAMP6 TAMP_IER_ITAMP6IE +#define RTC_IT_INT_TAMPALL (RTC_IT_INT_TAMP3 | RTC_IT_INT_TAMP4 | \ + RTC_IT_INT_TAMP5 | RTC_IT_INT_TAMP6) +/** + * @} + */ + +/** @defgroup RTCEx_Flags RTCEx Flags + * @{ + */ +#define RTC_FLAG_TAMP1 TAMP_SR_TAMP1F +#define RTC_FLAG_TAMP2 TAMP_SR_TAMP2F +#if defined(TAMP_CR1_TAMP3E) +#define RTC_FLAG_TAMP3 TAMP_SR_TAMP3F +#define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1 | RTC_FLAG_TAMP2 | RTC_FLAG_TAMP3) +#else +#define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1 | RTC_FLAG_TAMP2) +#endif +#define RTC_FLAG_INT_TAMP3 TAMP_SR_ITAMP3F +#define RTC_FLAG_INT_TAMP4 TAMP_SR_ITAMP4F +#define RTC_FLAG_INT_TAMP5 TAMP_SR_ITAMP5F +#define RTC_FLAG_INT_TAMP6 TAMP_SR_ITAMP6F +#define RTC_FLAG_INT_TAMPALL (RTC_FLAG_INT_TAMP3 | RTC_FLAG_INT_TAMP4 | \ + RTC_FLAG_INT_TAMP5 | RTC_FLAG_INT_TAMP6) +/** + * @} + */ + + +/** @defgroup RTCEx_Backup_Registers RTCEx Backup Registers Definition + * @{ + */ +#define RTC_BKP_NUMBER 0x00000005u +#define RTC_BKP_DR0 0x00000000u +#define RTC_BKP_DR1 0x00000001u +#define RTC_BKP_DR2 0x00000002u +#define RTC_BKP_DR3 0x00000003u +#define RTC_BKP_DR4 0x00000004u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros + * @{ + */ + +/** @brief Clear the specified RTC pending flag. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag + * @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag + * @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag + * @arg @ref RTC_CLEAR_WUTF Clear Wakeup timer flag + * @arg @ref RTC_CLEAR_ALRBF Clear Alarm B flag + * @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag + * @retval None + */ +#define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SCR |= (__FLAG__)) + +/** @brief Check whether the specified RTC flag is set or not. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be: + * @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag + * @arg @ref RTC_FLAG_INITF Initialization flag + * @arg @ref RTC_FLAG_RSF Registers synchronization flag + * @arg @ref RTC_FLAG_INITS Initialization status flag + * @arg @ref RTC_FLAG_SHPF Shift operation pending flag + * @arg @ref RTC_FLAG_WUTWF Wakeup timer write flag + * @arg @ref RTC_FLAG_ALRBWF Alarm B write flag + * @arg @ref RTC_FLAG_ALRAWF Alarm A write flag + * @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag + * @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag + * @arg @ref RTC_FLAG_TSF Time-stamp flag + * @arg @ref RTC_FLAG_WUTF Wakeup timer flag + * @arg @ref RTC_FLAG_ALRBF Alarm B flag + * @arg @ref RTC_FLAG_ALRAF Alarm A flag + * @retval None + */ +#define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__) (((((__FLAG__)) >> 8U) == 1U) ? ((((__HANDLE__)->Instance->ICSR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) != 0U) ? 1U : 0U) :\ + ((((__HANDLE__)->Instance->SR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) != 0U) ? 1U : 0U)) + +/* ---------------------------------WAKEUPTIMER---------------------------------*/ +/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer + * @{ + */ +/** + * @brief Enable the RTC WakeUp Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) + +/** + * @brief Disable the RTC WakeUp Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) + +/** + * @brief Enable the RTC WakeUpTimer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC WakeUpTimer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->SR) & ((__INTERRUPT__)>> 12U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC WakeUpTimers flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_WUTF + * @arg @ref RTC_FLAG_WUTWF + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) + +/** + * @brief Clear the RTC Wake Up timers pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_WUTF + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_WUTF)) + +/* WAKE-UP TIMER EXTI */ +/* ------------------ */ +/** + * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @brief Enable event on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable event on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @} + */ + +/* ---------------------------------TIMESTAMP---------------------------------*/ +/** @defgroup RTCEx_Timestamp RTC Timestamp + * @{ + */ +/** + * @brief Enable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) + +/** + * @brief Disable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) + +/** + * @brief Enable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->SR) & ((__INTERRUPT__)>> 12U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC TimeStamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) + +/** + * @brief Clear the RTC Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), (__FLAG__))) + +/** + * @brief Enable interrupt on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) + +/** + * @brief Disable interrupt on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) + +/** + * @brief Enable event on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) + +/** + * @brief Disable event on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) + +/** + * @brief Enable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) + +/** + * @brief Disable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) + +/** + * @brief Get the selected RTC Internal Time Stamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) + +/** + * @brief Clear the RTC Internal Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ITSF)) + +/** + * @brief Enable the RTC TimeStamp on Tamper detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPTS)) + +/** + * @brief Disable the RTC TimeStamp on Tamper detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPTS)) + +/** + * @brief Enable the RTC Tamper detection output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPOE)) + +/** + * @brief Disable the RTC Tamper detection output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPOE)) + + +/** + * @} + */ + + +/* ------------------------------Calibration----------------------------------*/ +/** @defgroup RTCEx_Calibration RTC Calibration + * @{ + */ + +/** + * @brief Enable the RTC calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) + +/** + * @brief Disable the calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) + + +/** + * @brief Enable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) + +/** + * @brief Disable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) + + +/** + * @brief Get the selected RTC shift operations flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_SHPF + * @retval None + */ +#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) +/** + * @} + */ + + +/* ------------------------------Tamper----------------------------------*/ +/** @defgroup RTCEx_Tamper RTCEx tamper + * @{ + */ +/** + * @brief Enable the TAMP Tamper input detection. + * @param __HANDLE__ specifies the RTC handle. + * @param __TAMPER__ specifies the RTC Tamper source to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_ALL_TAMPER: All tampers + * @arg RTC_TAMPER_1: Tamper1 + * @arg RTC_TAMPER_2: Tamper2 + * @arg RTC_TAMPER_3: Tamper3 (*) + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE(__HANDLE__, __TAMPER__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 |= (__TAMPER__)) + +/** + * @brief Disable the TAMP Tamper input detection. + * @param __HANDLE__ specifies the TAMP handle. + * @param __TAMPER__ specifies the TAMP Tamper sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_ALL_TAMPER: All tampers + * @arg RTC_TAMPER_1: Tamper1 + * @arg RTC_TAMPER_2: Tamper2 + * @arg RTC_TAMPER_3: Tamper3 (*) + */ +#define __HAL_RTC_TAMPER_DISABLE(__HANDLE__, __TAMPER__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 &= ~(__TAMPER__)) + + +/**************************************************************************************************/ +/** + * @brief Enable the TAMP Tamper interrupt. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER |= (__INTERRUPT__)) + +/** + * @brief Disable the TAMP Tamper interrupt. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @retval None + */ +#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER &= ~(__INTERRUPT__)) + + +/**************************************************************************************************/ +/** + * @brief Check whether the specified TAMP Tamper interrupt has occurred or not. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt to check. + * This parameter can be: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @arg RTC_IT_INT_TAMP3: Internal Tamper3 interrupt + * @arg RTC_IT_INT_TAMP4: Internal Tamper4 interrupt + * @arg RTC_IT_INT_TAMP5: Internal Tamper5 interrupt + * @arg RTC_IT_INT_TAMP6: Internal Tamper6 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + + +/** + * @brief Check whether the specified TAMP Tamper interrupt has been enabled or not. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt source to check. + * This parameter can be: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @arg RTC_IT_INT_TAMPALL: All internal tampers interrupts + * @arg RTC_IT_INT_TAMP3: Internal Tamper3 interrupt + * @arg RTC_IT_INT_TAMP4: Internal Tamper4 interrupt + * @arg RTC_IT_INT_TAMP5: Internal Tamper5 interrupt + * @arg RTC_IT_INT_TAMP6: Internal Tamper6 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + + +/** + * @brief Get the selected TAMP Tampers flag status. + * @param __HANDLE__ specifies the TAMP handle. + * @param __FLAG__ specifies the TAMP Tamper Flag is pending or not. + * This parameter can be: + * @arg RTC_FLAG_TAMP1: Tamper1 flag + * @arg RTC_FLAG_TAMP2: Tamper2 flag + * @arg RTC_FLAG_TAMP3: Tamper3 flag (*) + * @arg RTC_FLAG_INT_TAMP3: Internal Tamper3 flag + * @arg RTC_FLAG_INT_TAMP4: Internal Tamper4 flag + * @arg RTC_FLAG_INT_TAMP5: Internal Tamper5 flag + * @arg RTC_FLAG_INT_TAMP6: Internal Tamper6 flag + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SR) & (__FLAG__)) != 0U) + +/** + * @brief Clear the TAMP Tampers pending flags. + * @param __HANDLE__ specifies the TAMP handle. + * @param __FLAG__ specifies the TAMP Tamper Flag to clear. + * This parameter can be: + * @arg RTC_FLAG_TAMPALL: All Tamper flags + * @arg RTC_FLAG_TAMP1: Tamper1 flag + * @arg RTC_FLAG_TAMP2: Tamper2 flag + * @arg RTC_FLAG_TAMP3: Tamper3 flag (*) + * @arg RTC_FLAG_INT_TAMP3: Internal Tamper3 flag + * @arg RTC_FLAG_INT_TAMP4: Internal Tamper4 flag + * @arg RTC_FLAG_INT_TAMP5: Internal Tamper5 flag + * @arg RTC_FLAG_INT_TAMP6: Internal Tamper6 flag + * @retval None + */ +#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SCR) |= (__FLAG__)) + +/** + * @brief Enable interrupt on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_EVENT) + +/** + * @brief Disable interrupt on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_EVENT)) + +/** + * @brief Enable event on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_EVENT) + +/** + * @brief Disable event on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_EVENT)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/* RTC TimeStamp functions *****************************************/ +/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); + +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + + +/* RTC Wake-up functions ******************************************************/ +/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/* Extended Control functions ************************************************/ +/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Extended RTC features functions *******************************************/ +/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions + * @{ + */ + +void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group5 Extended RTC Tamper functions + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); +HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(RTC_HandleTypeDef *hrtc, uint32_t IntTamper); +HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout); +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); +#if defined(TAMP_CR1_TAMP3E) +void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); +#endif +void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group6 Extended RTC Backup register functions + * @{ + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); +/** + * @} + */ + + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Constants RTCEx Private Constants + * @{ + */ +#define RTC_EXTI_LINE_TIMESTAMP_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Time Stamp events */ +#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Wakeup event */ +#define RTC_EXTI_LINE_TAMPER_EVENT EXTI_IMR1_IM21 /*!< External interrupt line 19 Connected to the RTC tamper events*/ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Macros RTCEx Private Macros + * @{ + */ + +/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters + * @{ + */ +#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ + ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) + + +#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) + + + +#define IS_RTC_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) + +#define IS_RTC_TAMPER_TAMPERDETECTIONOUTPUT(MODE) (((MODE) == RTC_TAMPERDETECTIONOUTPUT_ENABLE) || \ + ((MODE) == RTC_TAMPERDETECTIONOUTPUT_DISABLE)) + + +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) + +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) + +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) + +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ + ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) + +#define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & RTC_TAMPER_ALL) != 0x00U) && \ + (((__TAMPER__) & ~RTC_TAMPER_ALL) == 0x00U)) + +#define IS_RTC_INTERNAL_TAMPER(__INT_TAMPER__) ((((__INT_TAMPER__) & RTC_INT_TAMPER_ALL) != 0x00U) && \ + (((__INT_TAMPER__) & ~RTC_INT_TAMPER_ALL) == 0x00U)) + +#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) + +#define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ + ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) + +#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ + ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) + +#define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) + +#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) + +#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ + ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) + +#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) + +#define IS_RTC_BKP(__BKP__) ((__BKP__) < RTC_BKP_NUMBER) + + +/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definitions + * @{ + */ +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) +/** + * @} + */ + + +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ + ((SEL) == RTC_SHIFTADD1S_SET)) + + + +/** @defgroup RTCEx_Subtract_Fraction_Of_Second_Value RTCEx Subtract Fraction Of Second Value + * @{ + */ +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) +/** + * @} + */ +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ + ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) + +/** + * @} + */ + +/** + * @} + */ + + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RTC_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smartcard.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smartcard.h new file mode 100644 index 0000000..0472380 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smartcard.h @@ -0,0 +1,1256 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_smartcard.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_SMARTCARD_H +#define STM32G0xx_HAL_SMARTCARD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types + * @{ + */ + +/** + * @brief SMARTCARD Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hsmartcard->Init.BaudRate))) + where usart_ker_ckpres is the USART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */ + + uint32_t StopBits; /*!< Specifies the number of stop bits. + This parameter can be a value of @ref SMARTCARD_Stop_Bits. */ + + uint16_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref SMARTCARD_Parity + @note The parity is enabled by default (PCE is forced to 1). + Since the WordLength is forced to 8 bits + parity, M is + forced to 1 and the parity bit is the 9th bit. */ + + uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref SMARTCARD_Mode */ + + uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ + + uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SMARTCARD_Clock_Phase */ + + uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref SMARTCARD_Last_Bit */ + + uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */ + + uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. + This parameter can be any value from 0x01 to 0x1F. Prescaler value is multiplied + by 2 to give the division factor of the source clock frequency */ + + uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */ + + uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled + in case of parity error. + This parameter can be a value of @ref SMARTCARD_NACK_Enable */ + + uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. + This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ + + uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: + it is used to implement the Character Wait Time (CWT) and + Block Wait Time (BWT). It is coded over 24 bits. */ + + uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. + This parameter can be any value from 0x0 to 0xFF */ + + uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in + receive and transmit mode). When set to 0, retransmission is + disabled. Otherwise, its maximum value is 7 (before signalling + an error) */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref SMARTCARD_ClockPrescaler. */ + +} SMARTCARD_InitTypeDef; + +/** + * @brief SMARTCARD advanced features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several + advanced features may be initialized at the same time. This parameter + can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Tx_Inv */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Rx_Inv */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref SMARTCARD_Data_Inv */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref SMARTCARD_MSB_First */ + + uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when + relevant flag is available) or once guard time period has elapsed. + This parameter can be a value of @ref SMARTCARDEx_Transmission_Completion_Indication. */ +} SMARTCARD_AdvFeatureInitTypeDef; + +/** + * @brief HAL SMARTCARD State definition + * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState (see @ref SMARTCARD_State_Definition). + * - gState contains SMARTCARD state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized. HAL SMARTCARD Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_SMARTCARD_StateTypeDef; + +/** + * @brief SMARTCARD handle Structure definition + */ +typedef struct __SMARTCARD_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ + + SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. + This parameter can be a value of @ref SMARTCARDEx_FIFO_mode. */ + + void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. + This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< SmartCard Error code */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Complete Callback */ + + void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Complete Callback */ + + void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Error Callback */ + + void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Receive Complete Callback */ + + void (* RxFifoFullCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Fifo Full Callback */ + + void (* TxFifoEmptyCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp Init callback */ + + void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp DeInit callback */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +} SMARTCARD_HandleTypeDef; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMARTCARD Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ + HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ + HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ + HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ + HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ + HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ + HAL_SMARTCARD_RX_FIFO_FULL_CB_ID = 0x06U, /*!< SMARTCARD Rx Fifo Full Callback ID */ + HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID = 0x07U, /*!< SMARTCARD Tx Fifo Empty Callback ID */ + + HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ + HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ + +} HAL_SMARTCARD_CallbackIDTypeDef; + +/** + * @brief HAL SMARTCARD Callback pointer definition + */ +typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsmartcard); /*!< pointer to an SMARTCARD callback function */ + +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief SMARTCARD clock sources + */ +typedef enum +{ + SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */ +} SMARTCARD_ClockSourceTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants + * @{ + */ + +/** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition + * @{ + */ +#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between gState and RxState values */ +#define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition + * @{ + */ +#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ +#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ +#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */ +#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ +#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver TimeOut error */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length + * @{ + */ +#define SMARTCARD_WORDLENGTH_9B USART_CR1_M0 /*!< SMARTCARD frame length */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits + * @{ + */ +#define SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 /*!< SMARTCARD frame with 0.5 stop bit */ +#define SMARTCARD_STOPBITS_1_5 USART_CR2_STOP /*!< SMARTCARD frame with 1.5 stop bits */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Parity SMARTCARD Parity + * @{ + */ +#define SMARTCARD_PARITY_EVEN USART_CR1_PCE /*!< SMARTCARD frame even parity */ +#define SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< SMARTCARD frame odd parity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode + * @{ + */ +#define SMARTCARD_MODE_RX USART_CR1_RE /*!< SMARTCARD RX mode */ +#define SMARTCARD_MODE_TX USART_CR1_TE /*!< SMARTCARD TX mode */ +#define SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< SMARTCARD RX and TX mode */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity + * @{ + */ +#define SMARTCARD_POLARITY_LOW 0x00000000U /*!< SMARTCARD frame low polarity */ +#define SMARTCARD_POLARITY_HIGH USART_CR2_CPOL /*!< SMARTCARD frame high polarity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase + * @{ + */ +#define SMARTCARD_PHASE_1EDGE 0x00000000U /*!< SMARTCARD frame phase on first clock transition */ +#define SMARTCARD_PHASE_2EDGE USART_CR2_CPHA /*!< SMARTCARD frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit + * @{ + */ +#define SMARTCARD_LASTBIT_DISABLE 0x00000000U /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */ +#define SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method + * @{ + */ +#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< SMARTCARD frame one-bit sample disabled */ +#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< SMARTCARD frame one-bit sample enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable + * @{ + */ +#define SMARTCARD_NACK_DISABLE 0x00000000U /*!< SMARTCARD NACK transmission disabled */ +#define SMARTCARD_NACK_ENABLE USART_CR3_NACK /*!< SMARTCARD NACK transmission enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable + * @{ + */ +#define SMARTCARD_TIMEOUT_DISABLE 0x00000000U /*!< SMARTCARD receiver timeout disabled */ +#define SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< SMARTCARD receiver timeout enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_ClockPrescaler SMARTCARD Clock Prescaler + * @{ + */ +#define SMARTCARD_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define SMARTCARD_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define SMARTCARD_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define SMARTCARD_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define SMARTCARD_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define SMARTCARD_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define SMARTCARD_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define SMARTCARD_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define SMARTCARD_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define SMARTCARD_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define SMARTCARD_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define SMARTCARD_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap + * @{ + */ +#define SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable + * @{ + */ +#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error + * @{ + */ +#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first + * @{ + */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters + * @{ + */ +#define SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive data flush request */ +#define SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush request */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask + * @{ + */ +#define SMARTCARD_IT_MASK 0x001FU /*!< SMARTCARD interruptions flags mask */ +#define SMARTCARD_CR_MASK 0x00E0U /*!< SMARTCARD control register mask */ +#define SMARTCARD_CR_POS 5U /*!< SMARTCARD control register position */ +#define SMARTCARD_ISR_MASK 0x1F00U /*!< SMARTCARD ISR register mask */ +#define SMARTCARD_ISR_POS 8U /*!< SMARTCARD ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros + * @{ + */ + +/** @brief Reset SMARTCARD handle states. + * @param __HANDLE__ SMARTCARD handle. + * @retval None + */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** @brief Flush the Smartcard Data registers. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified SMARTCARD pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the SMARTCARD PE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) + +/** @brief Clear the SMARTCARD FE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) + +/** @brief Clear the SMARTCARD NE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) + +/** @brief Clear the SMARTCARD ORE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) + +/** @brief Clear the SMARTCARD IDLE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) + +/** @brief Check whether the specified Smartcard flag is set or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available) + * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_BUSY Busy flag + * @arg @ref SMARTCARD_FLAG_EOBF End of block flag + * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag + * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag + * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag + * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag + * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag + * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag + * @arg @ref SMARTCARD_FLAG_NE Noise error flag + * @arg @ref SMARTCARD_FLAG_FE Framing error flag + * @arg @ref SMARTCARD_FLAG_PE Parity error flag + * @arg @ref SMARTCARD_FLAG_TXFNF TXFIFO not full flag + * @arg @ref SMARTCARD_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref SMARTCARD_FLAG_TXFE TXFIFO Empty flag + * @arg @ref SMARTCARD_FLAG_RXFF RXFIFO Full flag + * @arg @ref SMARTCARD_FLAG_RXFT SMARTCARD RXFIFO threshold flag + * @arg @ref SMARTCARD_FLAG_TXFT SMARTCARD TXFIFO threshold flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Disable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Check whether the specified SmartCard interrupt has occurred or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & ((uint32_t)0x01U << (((__INTERRUPT__) & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified SmartCard interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \ + (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & SMARTCARD_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available) + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific SMARTCARD request flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request + * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable the USART associated to the SMARTCARD Handle. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable the USART associated to the SMARTCARD Handle + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros -------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros + * @{ + */ + +/** @brief Report the SMARTCARD clock source. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__. + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#else +#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif + +/** @brief Check the Baud rate range. + * @note The maximum Baud Rate is derived from the maximum clock on G0 (64 MHz) + * divided by the oversampling used on the SMARTCARD (i.e. 16). + * @param __BAUDRATE__ Baud rate set by the configuration function. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4000001U) + +/** @brief Check the block length range. + * @note The maximum SMARTCARD block length is 0xFF. + * @param __LENGTH__ block length. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU) + +/** @brief Check the receiver timeout value. + * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** @brief Check the SMARTCARD autoretry counter value. + * @note The maximum number of retransmissions is 0x7. + * @param __COUNT__ number of retransmissions. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U) + +/** @brief Ensure that SMARTCARD frame length is valid. + * @param __LENGTH__ SMARTCARD frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) + +/** @brief Ensure that SMARTCARD frame number of stop bits is valid. + * @param __STOPBITS__ SMARTCARD frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\ + ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)) + +/** @brief Ensure that SMARTCARD frame parity is valid. + * @param __PARITY__ SMARTCARD frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ + ((__PARITY__) == SMARTCARD_PARITY_ODD)) + +/** @brief Ensure that SMARTCARD communication mode is valid. + * @param __MODE__ SMARTCARD communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that SMARTCARD frame polarity is valid. + * @param __CPOL__ SMARTCARD frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW)\ + || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) + +/** @brief Ensure that SMARTCARD frame phase is valid. + * @param __CPHA__ SMARTCARD frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) + +/** @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid. + * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) + +/** @brief Ensure that SMARTCARD frame sampling is valid. + * @param __ONEBIT__ SMARTCARD frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that SMARTCARD NACK transmission setting is valid. + * @param __NACK__ SMARTCARD NACK transmission setting. + * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid) + */ +#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ + ((__NACK__) == SMARTCARD_NACK_DISABLE)) + +/** @brief Ensure that SMARTCARD receiver timeout setting is valid. + * @param __TIMEOUT__ SMARTCARD receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) + +/** @brief Ensure that SMARTCARD clock Prescaler is valid. + * @param __CLOCKPRESCALER__ SMARTCARD clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_SMARTCARD_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV256)) + +/** @brief Ensure that SMARTCARD advanced features initialization is valid. + * @param __INIT__ SMARTCARD advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ + SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ + SMARTCARD_ADVFEATURE_SWAP_INIT | \ + SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ + SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + +/** @brief Ensure that SMARTCARD frame TX inversion setting is valid. + * @param __TXINV__ SMARTCARD frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX inversion setting is valid. + * @param __RXINV__ SMARTCARD frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame data inversion setting is valid. + * @param __DATAINV__ SMARTCARD frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid. + * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) + +/** @brief Ensure that SMARTCARD frame overrun setting is valid. + * @param __OVERRUN__ SMARTCARD frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) + +/** @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. + * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** @brief Ensure that SMARTCARD frame MSB first setting is valid. + * @param __MSBFIRST__ SMARTCARD frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) + +/** @brief Ensure that SMARTCARD request parameter is valid. + * @param __PARAM__ SMARTCARD request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST)) + +/** + * @} + */ + +/* Include SMARTCARD HAL Extended module */ +#include "stm32g0xx_hal_smartcard_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARD_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard); + +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group4 + * @{ + */ + +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard); +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_SMARTCARD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smartcard_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smartcard_ex.h new file mode 100644 index 0000000..ed15497 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smartcard_ex.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_smartcard_ex.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_SMARTCARD_EX_H +#define STM32G0xx_HAL_SMARTCARD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARDEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @addtogroup SMARTCARDEx_Exported_Constants SMARTCARD Extended Exported Constants + * @{ + */ + +/** @defgroup SMARTCARDEx_Transmission_Completion_Indication SMARTCARD Transmission Completion Indication + * @{ + */ +#define SMARTCARD_TCBGT SMARTCARD_IT_TCBGT /*!< SMARTCARD transmission complete before guard time */ +#define SMARTCARD_TC SMARTCARD_IT_TC /*!< SMARTCARD transmission complete (flag raised when guard time has elapsed) */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type + * @{ + */ +#define SMARTCARD_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define SMARTCARD_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define SMARTCARD_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +#define SMARTCARD_ADVFEATURE_TXCOMPLETION 0x00000100U /*!< TX completion indication before of after guard time */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_FIFO_mode SMARTCARD FIFO mode + * @brief SMARTCARD FIFO mode + * @{ + */ +#define SMARTCARD_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define SMARTCARD_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_TXFIFO_threshold_level SMARTCARD TXFIFO threshold level + * @brief SMARTCARD TXFIFO level + * @{ + */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_RXFIFO_threshold_level SMARTCARD RXFIFO threshold level + * @brief SMARTCARD RXFIFO level + * @{ + */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Flags SMARTCARD Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define SMARTCARD_FLAG_TCBGT USART_ISR_TCBGT /*!< SMARTCARD transmission complete before guard time completion */ +#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */ +#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */ +#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */ +#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */ +#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */ +#define SMARTCARD_FLAG_TXE USART_ISR_TXE_TXFNF /*!< SMARTCARD transmit data register empty */ +#define SMARTCARD_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< SMARTCARD TXFIFO not full */ +#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */ +#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD read data register not empty */ +#define SMARTCARD_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD RXFIFO not empty */ +#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */ +#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */ +#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */ +#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */ +#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */ +#define SMARTCARD_FLAG_TXFE USART_ISR_TXFE /*!< SMARTCARD TXFIFO Empty flag */ +#define SMARTCARD_FLAG_RXFF USART_ISR_RXFF /*!< SMARTCARD RXFIFO Full flag */ +#define SMARTCARD_FLAG_RXFT USART_ISR_RXFT /*!< SMARTCARD RXFIFO threshold flag */ +#define SMARTCARD_FLAG_TXFT USART_ISR_TXFT /*!< SMARTCARD TXFIFO threshold flag */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Interrupt_definition SMARTCARD Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5 bits) + * - XX : Interrupt source register (2 bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5 bits) + * @{ + */ +#define SMARTCARD_IT_PE 0x0028U /*!< SMARTCARD parity error interruption */ +#define SMARTCARD_IT_TXE 0x0727U /*!< SMARTCARD transmit data register empty interruption */ +#define SMARTCARD_IT_TXFNF 0x0727U /*!< SMARTCARD TX FIFO not full interruption */ +#define SMARTCARD_IT_TC 0x0626U /*!< SMARTCARD transmission complete interruption */ +#define SMARTCARD_IT_RXNE 0x0525U /*!< SMARTCARD read data register not empty interruption */ +#define SMARTCARD_IT_RXFNE 0x0525U /*!< SMARTCARD RXFIFO not empty interruption */ +#define SMARTCARD_IT_IDLE 0x0424U /*!< SMARTCARD idle line detection interruption */ + +#define SMARTCARD_IT_ERR 0x0060U /*!< SMARTCARD error interruption */ +#define SMARTCARD_IT_ORE 0x0300U /*!< SMARTCARD overrun error interruption */ +#define SMARTCARD_IT_NE 0x0200U /*!< SMARTCARD noise error interruption */ +#define SMARTCARD_IT_FE 0x0100U /*!< SMARTCARD frame error interruption */ + +#define SMARTCARD_IT_EOB 0x0C3BU /*!< SMARTCARD end of block interruption */ +#define SMARTCARD_IT_RTO 0x0B3AU /*!< SMARTCARD receiver timeout interruption */ +#define SMARTCARD_IT_TCBGT 0x1978U /*!< SMARTCARD transmission complete before guard time completion interruption */ + +#define SMARTCARD_IT_RXFF 0x183FU /*!< SMARTCARD RXFIFO full interruption */ +#define SMARTCARD_IT_TXFE 0x173EU /*!< SMARTCARD TXFIFO empty interruption */ +#define SMARTCARD_IT_RXFT 0x1A7CU /*!< SMARTCARD RXFIFO threshold reached interruption */ +#define SMARTCARD_IT_TXFT 0x1B77U /*!< SMARTCARD TXFIFO threshold reached interruption */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags + * @{ + */ +#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */ +#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */ +#define SMARTCARD_CLEAR_NEF USART_ICR_NECF /*!< SMARTCARD noise error detected clear flag */ +#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */ +#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */ +#define SMARTCARD_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty Clear Flag */ +#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */ +#define SMARTCARD_CLEAR_TCBGTF USART_ICR_TCBGTCF /*!< SMARTCARD transmission complete before guard time completion clear flag */ +#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */ +#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macros -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Macros SMARTCARD Extended Private Macros + * @{ + */ + +/** @brief Set the Transmission Completion flag + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note If TCBGT (Transmission Complete Before Guard Time) flag is not available or if + * AdvancedInit.TxCompletionIndication is not already filled, the latter is forced + * to SMARTCARD_TC (transmission completion indication when guard time has elapsed). + * @retval None + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_SETTING(__HANDLE__) \ + do { \ + if (HAL_IS_BIT_CLR((__HANDLE__)->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXCOMPLETION)) \ + { \ + (__HANDLE__)->AdvancedInit.TxCompletionIndication = SMARTCARD_TC; \ + } \ + else \ + { \ + assert_param(IS_SMARTCARD_TRANSMISSION_COMPLETION((__HANDLE__)->AdvancedInit.TxCompletionIndication)); \ + } \ + } while(0U) + +/** @brief Return the transmission completion flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note Based on AdvancedInit.TxCompletionIndication setting, return TC or TCBGT flag. + * When TCBGT flag (Transmission Complete Before Guard Time) is not available, TC flag is + * reported. + * @retval Transmission completion flag + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_FLAG(__HANDLE__) \ + (((__HANDLE__)->AdvancedInit.TxCompletionIndication == SMARTCARD_TC) ? (SMARTCARD_FLAG_TC) : (SMARTCARD_FLAG_TCBGT)) + + +/** @brief Ensure that SMARTCARD frame transmission completion used flag is valid. + * @param __TXCOMPLETE__ SMARTCARD frame transmission completion used flag. + * @retval SET (__TXCOMPLETE__ is valid) or RESET (__TXCOMPLETE__ is invalid) + */ +#define IS_SMARTCARD_TRANSMISSION_COMPLETION(__TXCOMPLETE__) (((__TXCOMPLETE__) == SMARTCARD_TCBGT) || \ + ((__TXCOMPLETE__) == SMARTCARD_TC)) + +/** @brief Ensure that SMARTCARD FIFO mode is valid. + * @param __STATE__ SMARTCARD FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_SMARTCARD_FIFOMODE_STATE(__STATE__) (((__STATE__) == SMARTCARD_FIFOMODE_DISABLE ) || \ + ((__STATE__) == SMARTCARD_FIFOMODE_ENABLE)) + +/** @brief Ensure that SMARTCARD TXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_8_8)) + +/** @brief Ensure that SMARTCARD RXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation methods *******************************************************/ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group1 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength); +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue); +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions_Group2 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_SMARTCARD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smbus.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smbus.h new file mode 100644 index 0000000..3a95572 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_smbus.h @@ -0,0 +1,749 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_smbus.h + * @author MCD Application Team + * @brief Header file of SMBUS HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_SMBUS_H +#define STM32G0xx_HAL_SMBUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMBUS + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Types SMBUS Exported Types + * @{ + */ + +/** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition + * @brief SMBUS Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value. + This parameter calculated by referring to SMBUS initialization + section in Reference manual */ + uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not. + This parameter can be a value of @ref SMBUS_Analog_Filter */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected. + This parameter can be a value of @ref SMBUS_addressing_mode */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref SMBUS_dual_addressing_mode */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected + This parameter can be a value of @ref SMBUS_own_address2_masks. */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref SMBUS_nostretch_mode */ + + uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected. + This parameter can be a value of @ref SMBUS_packet_error_check_mode */ + + uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected. + This parameter can be a value of @ref SMBUS_peripheral_mode */ + + uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value. + (Enable bits and different timeout values) + This parameter calculated by referring to SMBUS initialization + section in Reference manual */ +} SMBUS_InitTypeDef; +/** + * @} + */ + +/** @defgroup HAL_state_definition HAL state definition + * @brief HAL State definition + * @{ + */ +#define HAL_SMBUS_STATE_RESET (0x00000000U) /*!< SMBUS not yet initialized or disabled */ +#define HAL_SMBUS_STATE_READY (0x00000001U) /*!< SMBUS initialized and ready for use */ +#define HAL_SMBUS_STATE_BUSY (0x00000002U) /*!< SMBUS internal process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_TIMEOUT (0x00000003U) /*!< Timeout state */ +#define HAL_SMBUS_STATE_ERROR (0x00000004U) /*!< Reception process is ongoing */ +#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */ +/** + * @} + */ + +/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition + * @brief SMBUS Error Code definition + * @{ + */ +#define HAL_SMBUS_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_SMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_SMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */ +#define HAL_SMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_SMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */ +#define HAL_SMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */ +#define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */ +#define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +#define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition + * @brief SMBUS handle Structure definition + * @{ + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +typedef struct __SMBUS_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +{ + I2C_TypeDef *Instance; /*!< SMBUS registers base address */ + + SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */ + + uint16_t XferSize; /*!< SMBUS transfer size */ + + __IO uint16_t XferCount; /*!< SMBUS transfer counter */ + + __IO uint32_t XferOptions; /*!< SMBUS transfer options */ + + __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */ + + HAL_LockTypeDef Lock; /*!< SMBUS locking object */ + + __IO uint32_t State; /*!< SMBUS communication state */ + + __IO uint32_t ErrorCode; /*!< SMBUS Error code */ + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Listen Complete callback */ + void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Error callback */ + + void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< SMBUS Slave Address Match callback */ + + void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp Init callback */ + void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp DeInit callback */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +} SMBUS_HandleTypeDef; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMBUS Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */ + HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */ + HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */ + HAL_SMBUS_ERROR_CB_ID = 0x05U, /*!< SMBUS Error callback ID */ + + HAL_SMBUS_MSPINIT_CB_ID = 0x06U, /*!< SMBUS Msp Init callback ID */ + HAL_SMBUS_MSPDEINIT_CB_ID = 0x07U /*!< SMBUS Msp DeInit callback ID */ + +} HAL_SMBUS_CallbackIDTypeDef; + +/** + * @brief HAL SMBUS Callback pointer definition + */ +typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); /*!< pointer to an SMBUS callback function */ +typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an SMBUS Address Match callback function */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants + * @{ + */ + +/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter + * @{ + */ +#define SMBUS_ANALOGFILTER_ENABLE (0x00000000U) +#define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup SMBUS_addressing_mode SMBUS addressing mode + * @{ + */ +#define SMBUS_ADDRESSINGMODE_7BIT (0x00000001U) +#define SMBUS_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode + * @{ + */ + +#define SMBUS_DUALADDRESS_DISABLE (0x00000000U) +#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks + * @{ + */ + +#define SMBUS_OA2_NOMASK ((uint8_t)0x00U) +#define SMBUS_OA2_MASK01 ((uint8_t)0x01U) +#define SMBUS_OA2_MASK02 ((uint8_t)0x02U) +#define SMBUS_OA2_MASK03 ((uint8_t)0x03U) +#define SMBUS_OA2_MASK04 ((uint8_t)0x04U) +#define SMBUS_OA2_MASK05 ((uint8_t)0x05U) +#define SMBUS_OA2_MASK06 ((uint8_t)0x06U) +#define SMBUS_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + + +/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode + * @{ + */ +#define SMBUS_GENERALCALL_DISABLE (0x00000000U) +#define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode + * @{ + */ +#define SMBUS_NOSTRETCH_DISABLE (0x00000000U) +#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode + * @{ + */ +#define SMBUS_PEC_DISABLE (0x00000000U) +#define SMBUS_PEC_ENABLE I2C_CR1_PECEN +/** + * @} + */ + +/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode + * @{ + */ +#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST I2C_CR1_SMBHEN +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (0x00000000U) +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP I2C_CR1_SMBDEN +/** + * @} + */ + +/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition + * @{ + */ + +#define SMBUS_SOFTEND_MODE (0x00000000U) +#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD +#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND +#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE +/** + * @} + */ + +/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition + * @{ + */ + +#define SMBUS_NO_STARTSTOP (0x00000000U) +#define SMBUS_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define SMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define SMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition + * @{ + */ + +/* List of XferOptions in usage of : + * 1- Restart condition when direction change + * 2- No Restart condition in other use cases + */ +#define SMBUS_FIRST_FRAME SMBUS_SOFTEND_MODE +#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_FIRST_FRAME_WITH_PEC ((uint32_t)(SMBUS_SOFTEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define SMBUS_OTHER_FRAME_NO_PEC (0x000000AAU) +#define SMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U) +#define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U) +#define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U) +/** + * @} + */ + +/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition + * @brief SMBUS Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define SMBUS_IT_ERRI I2C_CR1_ERRIE +#define SMBUS_IT_TCI I2C_CR1_TCIE +#define SMBUS_IT_STOPI I2C_CR1_STOPIE +#define SMBUS_IT_NACKI I2C_CR1_NACKIE +#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE +#define SMBUS_IT_RXI I2C_CR1_RXIE +#define SMBUS_IT_TXI I2C_CR1_TXIE +#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI) +#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI) +#define SMBUS_IT_ALERT (SMBUS_IT_ERRI) +#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI) +/** + * @} + */ + +/** @defgroup SMBUS_Flag_definition SMBUS Flag definition + * @brief Flag definition + * Elements values convention: 0xXXXXYYYY + * - XXXXXXXX : Flag mask + * @{ + */ + +#define SMBUS_FLAG_TXE I2C_ISR_TXE +#define SMBUS_FLAG_TXIS I2C_ISR_TXIS +#define SMBUS_FLAG_RXNE I2C_ISR_RXNE +#define SMBUS_FLAG_ADDR I2C_ISR_ADDR +#define SMBUS_FLAG_AF I2C_ISR_NACKF +#define SMBUS_FLAG_STOPF I2C_ISR_STOPF +#define SMBUS_FLAG_TC I2C_ISR_TC +#define SMBUS_FLAG_TCR I2C_ISR_TCR +#define SMBUS_FLAG_BERR I2C_ISR_BERR +#define SMBUS_FLAG_ARLO I2C_ISR_ARLO +#define SMBUS_FLAG_OVR I2C_ISR_OVR +#define SMBUS_FLAG_PECERR I2C_ISR_PECERR +#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define SMBUS_FLAG_ALERT I2C_ISR_ALERT +#define SMBUS_FLAG_BUSY I2C_ISR_BUSY +#define SMBUS_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros + * @{ + */ + +/** @brief Reset SMBUS handle state. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET) +#endif + +/** @brief Enable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified SMBUS interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the SMBUS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SMBUS flag is set or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_FLAG_TXE Transmit data register empty + * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status + * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode) + * @arg @ref SMBUS_FLAG_TCR Transfer complete reload + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * @arg @ref SMBUS_FLAG_BUSY Bus busy + * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define SMBUS_FLAG_MASK (0x0001FFFFU) +#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) + +/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Enable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Macro SMBUS Private Macros + * @{ + */ + +#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \ + ((FILTER) == SMBUS_ANALOGFILTER_DISABLE)) + +#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \ + ((MODE) == SMBUS_ADDRESSINGMODE_10BIT)) + +#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE)) + +#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \ + ((MASK) == SMBUS_OA2_MASK01) || \ + ((MASK) == SMBUS_OA2_MASK02) || \ + ((MASK) == SMBUS_OA2_MASK03) || \ + ((MASK) == SMBUS_OA2_MASK04) || \ + ((MASK) == SMBUS_OA2_MASK05) || \ + ((MASK) == SMBUS_OA2_MASK06) || \ + ((MASK) == SMBUS_OA2_MASK07)) + +#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \ + ((CALL) == SMBUS_GENERALCALL_ENABLE)) + +#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \ + ((STRETCH) == SMBUS_NOSTRETCH_ENABLE)) + +#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \ + ((PEC) == SMBUS_PEC_ENABLE)) + +#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)) + +#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \ + ((MODE) == SMBUS_AUTOEND_MODE) || \ + ((MODE) == SMBUS_SOFTEND_MODE) || \ + ((MODE) == SMBUS_SENDPEC_MODE) || \ + ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE ))) + + +#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \ + ((REQUEST) == SMBUS_GENERATE_START_READ) || \ + ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \ + ((REQUEST) == SMBUS_NO_STARTSTOP)) + + +#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \ + ((REQUEST) == SMBUS_FIRST_FRAME) || \ + ((REQUEST) == SMBUS_NEXT_FRAME) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC)) + +#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC)) + +#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN))) +#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN))) + +#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U) +#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U) +#define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE) +#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN) + +#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) +#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) + +#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup Blocking_mode_Polling Blocking mode Polling + * @{ + */ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt + * @{ + */ +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress); +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions); + +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus); +uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +/* Private functions are defined in stm32g0xx_hal_smbus.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_SMBUS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h new file mode 100644 index 0000000..91b43de --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h @@ -0,0 +1,852 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_SPI_H +#define STM32G0xx_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Code SPI Error Code + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000U) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000U) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000300U) +#define SPI_DATASIZE_5BIT (0x00000400U) +#define SPI_DATASIZE_6BIT (0x00000500U) +#define SPI_DATASIZE_7BIT (0x00000600U) +#define SPI_DATASIZE_8BIT (0x00000700U) +#define SPI_DATASIZE_9BIT (0x00000800U) +#define SPI_DATASIZE_10BIT (0x00000900U) +#define SPI_DATASIZE_11BIT (0x00000A00U) +#define SPI_DATASIZE_12BIT (0x00000B00U) +#define SPI_DATASIZE_13BIT (0x00000C00U) +#define SPI_DATASIZE_14BIT (0x00000D00U) +#define SPI_DATASIZE_15BIT (0x00000E00U) +#define SPI_DATASIZE_16BIT (0x00000F00U) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000U) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000U) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT (0x00000000U) +#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) +#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000U) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000U) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000U) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) +#define SPI_CRC_LENGTH_8BIT (0x00000001U) +#define SPI_CRC_LENGTH_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level + * @{ + */ +#define SPI_FTLVL_EMPTY (0x00000000U) +#define SPI_FTLVL_QUARTER_FULL (0x00000800U) +#define SPI_FTLVL_HALF_FULL (0x00001000U) +#define SPI_FTLVL_FULL (0x00001800U) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_FRLVL_EMPTY (0x00000000U) +#define SPI_FRLVL_QUARTER_FULL (0x00000200U) +#define SPI_FRLVL_HALF_FULL (0x00000400U) +#define SPI_FRLVL_FULL (0x00000600U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI handle. + * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf = 0x00U; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + } while(0U) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + } while(0U) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + }while(0U) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Set the SPI receive-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Reset the CRC calculation of the SPI. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of SPI SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval SET or RESET. + */ +#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ + ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of SPI CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ + (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if SPI Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Mode. + * This parameter can be a value of @ref SPI_Mode + * @retval None + */ +#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ + ((__MODE__) == SPI_MODE_MASTER)) + +/** @brief Checks if SPI Direction Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Direction Mode. + * This parameter can be a value of @ref SPI_Direction + * @retval None + */ +#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Direction Mode parameter is 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) + +/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Data Size parameter is in allowed range. + * @param __DATASIZE__ specifies the SPI Data Size. + * This parameter can be a value of @ref SPI_Data_Size + * @retval None + */ +#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_4BIT)) + +/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the SPI serial clock steady state. + * This parameter can be a value of @ref SPI_Clock_Polarity + * @retval None + */ +#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ + ((__CPOL__) == SPI_POLARITY_HIGH)) + +/** @brief Checks if SPI Clock Phase parameter is in allowed range. + * @param __CPHA__ specifies the SPI Clock Phase. + * This parameter can be a value of @ref SPI_Clock_Phase + * @retval None + */ +#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ + ((__CPHA__) == SPI_PHASE_2EDGE)) + +/** @brief Checks if SPI Slave Select parameter is in allowed range. + * @param __NSS__ specifies the SPI Slave Select management parameter. + * This parameter can be a value of @ref SPI_Slave_Select_management + * @retval None + */ +#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ + ((__NSS__) == SPI_NSS_HARD_INPUT) || \ + ((__NSS__) == SPI_NSS_HARD_OUTPUT)) + +/** @brief Checks if SPI NSS Pulse parameter is in allowed range. + * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. + * This parameter can be a value of @ref SPI_NSSP_Mode + * @retval None + */ +#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ + ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) + +/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. + * @param __PRESCALER__ specifies the SPI Baudrate prescaler. + * This parameter can be a value of @ref SPI_BaudRate_Prescaler + * @retval None + */ +#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) + +/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. + * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). + * This parameter can be a value of @ref SPI_MSB_LSB_transmission + * @retval None + */ +#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ + ((__BIT__) == SPI_FIRSTBIT_LSB)) + +/** @brief Checks if SPI TI mode parameter is in allowed range. + * @param __MODE__ specifies the SPI TI mode. + * This parameter can be a value of @ref SPI_TI_mode + * @retval None + */ +#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ + ((__MODE__) == SPI_TIMODE_ENABLE)) + +/** @brief Checks if SPI CRC calculation enabled state is in allowed range. + * @param __CALCULATION__ specifies the SPI CRC calculation enable state. + * This parameter can be a value of @ref SPI_CRC_Calculation + * @retval None + */ +#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ + ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) + +/** @brief Checks if SPI CRC length is in allowed range. + * @param __LENGTH__ specifies the SPI CRC length. + * This parameter can be a value of @ref SPI_CRC_length + * @retval None + */ +#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) + +/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. + * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. + * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 + * @retval None + */ +#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ + ((__POLYNOMIAL__) <= 0xFFFFU) && \ + (((__POLYNOMIAL__)&0x1U) != 0U)) + +/** @brief Checks if DMA handle is valid. + * @param __HANDLE__ specifies a DMA Handle. + * @retval None + */ +#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) + +/** + * @} + */ + +/* Include SPI HAL Extended module */ +#include "stm32g0xx_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_SPI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h new file mode 100644 index 0000000..80b960c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h @@ -0,0 +1,75 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi_ex.h + * @author MCD Application Team + * @brief Header file of SPI HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_SPI_EX_H +#define STM32G0xx_HAL_SPI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPIEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation functions *****************************************************/ +/** @addtogroup SPIEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_SPI_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h new file mode 100644 index 0000000..4b64977 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h @@ -0,0 +1,2425 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_TIM_H +#define STM32G0xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode + This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode + This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + uint32_t LockLevel; /*!< TIM Lock level + This parameter can be a value of @ref TIM_Lock_level */ + uint32_t DeadTime; /*!< TIM dead Time + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint32_t BreakState; /*!< TIM Break State + This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + uint32_t BreakPolarity; /*!< TIM Break input polarity + This parameter can be a value of @ref TIM_Break_Polarity */ + uint32_t BreakFilter; /*!< Specifies the break input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input. + This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + uint32_t Break2State; /*!< TIM Break2 State + This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + uint32_t Break2Polarity; /*!< TIM Break2 input polarity + This parameter can be a value of @ref TIM_Break2_Polarity */ + uint32_t Break2Filter; /*!< TIM break2 input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input. + This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */ + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x10000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x20000000U /*!< OCREF_CLR is connected to ETRF input */ +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define TIM_CLEARINPUTSOURCE_COMP1 0x00000000U /*!< OCREF_CLR_INT is connected to COMP1 output */ +#define TIM_CLEARINPUTSOURCE_COMP2 TIM1_OR1_OCREF_CLR_0 /*!< OCREF_CLR_INT is connected to COMP2 output */ +#define TIM_CLEARINPUTSOURCE_COMP3 TIM1_OR1_OCREF_CLR_1 /*!< OCREF_CLR_INT is connected to COMP3 output */ +#elif defined(COMP1) && defined(COMP2) +#define TIM_CLEARINPUTSOURCE_COMP1 0x00000000U /*!< OCREF_CLR_INT is connected to COMP1 output */ +#define TIM_CLEARINPUTSOURCE_COMP2 TIM1_OR1_OCREF_CLR /*!< OCREF_CLR_INT is connected to COMP2 output */ +#endif /* COMP1 && COMP2 && COMP3 */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_OR1 0x00000014U +#define TIM_DMABASE_CCMR3 0x00000015U +#define TIM_DMABASE_CCR5 0x00000016U +#define TIM_DMABASE_CCR6 0x00000017U +#define TIM_DMABASE_AF1 0x00000018U +#define TIM_DMABASE_AF2 0x00000019U +#define TIM_DMABASE_TISEL 0x0000001AU +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#if defined(USB_BASE) +#define TIM_CLOCKSOURCE_ITR7 TIM_TS_ITR7 /*!< External clock source mode 1 (ITR7) */ +#endif /* USB_BASE */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_AF_Mode TIM Break2 Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK2_AFMODE_INPUT 0x00000000U /*!< Break2 input BRK2 in input mode */ +#define TIM_BREAK2_AFMODE_BIDIRECTIONAL TIM_BDTR_BK2BID /*!< Break2 input BRK2 in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event + (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASSYMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#if defined(USB_BASE) +#define TIM_TS_ITR7 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 7 (ITR7) */ +#endif /* USB_BASE */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#define TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder +mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP1) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP2) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP3) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#elif defined(COMP1) && defined(COMP2) +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP1) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP2) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#else +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#endif /* COMP1 && COMP2 && COMP3 */ + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_OR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ + ((__BASE__) == TIM_DMABASE_AF2) || \ + ((__BASE__) == TIM_DMABASE_TISEL)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENALE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) + +#define IS_TIM_BREAK2_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK2_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#if defined(USB_BASE) +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#else +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#endif /* USB_BASE */ + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#if defined(PWR_PVD_SUPPORT) +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#else +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#endif /* PWR_PVD_SUPPORT */ + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32g0xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h new file mode 100644 index 0000000..f62d821 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h @@ -0,0 +1,496 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_TIM_EX_H +#define STM32G0xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */ +} +TIMEx_BreakInputConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */ +#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_AF1_ETRSEL_2 /* !< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */ +#if defined(COMP3) +#define TIM_TIM1_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM1_ETR is connected to COMP3 output */ +#endif +#if defined(TIM2) +#define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */ +#define TIM_TIM2_ETR_COMP1 TIM2_AF1_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */ +#define TIM_TIM2_ETR_COMP2 TIM2_AF1_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */ +#define TIM_TIM2_ETR_LSE (TIM2_AF1_ETRSEL_1 | TIM2_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to LSE */ +#if defined(COMP3) +#define TIM_TIM2_ETR_MCO TIM2_AF1_ETRSEL_2 /* !< TIM2_ETR is connected to MCO */ +#define TIM_TIM2_ETR_MCO2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to MCO2 */ +#define TIM_TIM2_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM2_ETR is connected to COMP3 output */ +#endif +#endif /* TIM2 */ +#if defined(TIM3) +#define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 output */ +#define TIM_TIM3_ETR_COMP2 TIM3_AF1_ETRSEL_1 /* !< TIM3_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_TIM3_ETR_COMP3 (TIM3_AF1_ETRSEL_1 | TIM3_AF1_ETRSEL_0) /* !< TIM3_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#endif /* TIM3 */ +#if defined(TIM4) +#define TIM_TIM4_ETR_GPIO 0x00000000U /* !< TIM4_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM4_ETR_COMP1 TIM4_AF1_ETRSEL_0 /* !< TIM4_ETR is connected to COMP1 output */ +#define TIM_TIM4_ETR_COMP2 TIM4_AF1_ETRSEL_1 /* !< TIM4_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_TIM4_ETR_COMP3 (TIM4_AF1_ETRSEL_1 | TIM4_AF1_ETRSEL_0) /* !< TIM4_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#endif /* TIM4 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /* !< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /* !< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */ +#if defined(COMP1) && defined(COMP2) +#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_BREAKINPUTSOURCE_COMP3 0x00000008U /* !< The COMP3 output is connected to the break input */ +#endif /* COMP3 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /* !< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /* !< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /* !< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /* !< Break input source is active_high */ +/** + * @} + */ + +/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection + * @{ + */ +#define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM1_TI1_COMP1 0x00000001U /* !< TIM1_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM1_TI2_GPIO 0x00000000U /* !< TIM1_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM1_TI2_COMP2 0x00000100U /* !< TIM1_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM1_TI3_GPIO 0x00000000U /* !< TIM1_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM1_TI3_COMP3 0x00010000U /* !< TIM1_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ + +#if defined(TIM2) +#define TIM_TIM2_TI1_GPIO 0x00000000U /* !< TIM2_TI1 is connected to GPIO */ +#define TIM_TIM2_TI1_COMP1 0x00000001U /* !< TIM2_TI1 is connected to COMP1 OUT */ + +#define TIM_TIM2_TI2_GPIO 0x00000000U /* !< TIM2_TI2 is connected to GPIO */ +#define TIM_TIM2_TI2_COMP2 0x00000100U /* !< TIM2_TI2 is connected to COMP2 OUT */ + +#define TIM_TIM2_TI3_GPIO 0x00000000U /* !< TIM2_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM2_TI3_COMP3 0x00010000U /* !< TIM2_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ +#endif /* TIM2 */ + +#define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM3_TI1_COMP1 0x00000001U /* !< TIM3_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM3_TI2_GPIO 0x00000000U /* !< TIM3_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM3_TI2_COMP2 0x00000100U /* !< TIM3_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM3_TI3_GPIO 0x00000000U /* !< TIM3_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM3_TI3_COMP3 0x00010000U /* !< TIM3_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ + +#if defined(TIM4) +#define TIM_TIM4_TI1_GPIO 0x00000000U /* !< TIM4_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM4_TI1_COMP1 0x00000001U /* !< TIM4_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM4_TI2_GPIO 0x00000000U /* !< TIM4_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM4_TI2_COMP2 0x00000100U /* !< TIM4_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM4_TI3_GPIO 0x00000000U /* !< TIM4_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM4_TI3_COMP3 0x00010000U /* !< TIM4_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ +#endif /* TIM4 */ + +#define TIM_TIM14_TI1_GPIO 0x00000000U /* !< TIM14_TI1 is connected to GPIO */ +#define TIM_TIM14_TI1_RTC 0x00000001U /* !< TIM14_TI1 is connected to RTC clock */ +#define TIM_TIM14_TI1_HSE_32 0x00000002U /* !< TIM14_TI1 is connected to HSE div 32 */ +#define TIM_TIM14_TI1_MCO 0x00000003U /* !< TIM14_TI1 is connected to MCO */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM14_TI1_MCO2 0x00000004U /* !< TIM14_TI1 is connected to MCO2 */ +#endif + +#if defined(TIM15) +#define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15_TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_TIM2_CH1 0x00000001U /* !< TIM15_TI1 is connected to TIM2 CH1 */ +#define TIM_TIM15_TI1_TIM3_CH1 0x00000002U /* !< TIM15_TI1 is connected to TIM3 CH1 */ + +#define TIM_TIM15_TI2_GPIO 0x00000000U /* !< TIM15_TI2 is connected to GPIO */ +#define TIM_TIM15_TI2_TIM2_CH2 0x00000100U /* !< TIM15_TI2 is connected to TIM2 CH2 */ +#define TIM_TIM15_TI2_TIM3_CH2 0x00000200U /* !< TIM15_TI2 is connected to TIM3 CH2 */ +#endif /* TIM15 */ + +#define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16_TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_LSI 0x00000001U /* !< TIM16_TI1 is connected to LSI */ +#define TIM_TIM16_TI1_LSE 0x00000002U /* !< TIM16_TI1 is connected to LSE */ +#define TIM_TIM16_TI1_RTC_WAKEUP 0x00000003U /* !< TIM16_TI1 is connected to TRC wakeup interrupt */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM16_TI1_MCO2 0x00000004U /* !< TIM16_TI1 is connected to MCO2 */ +#endif + +#define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17_TI1 is connected to GPIO */ +#if defined(RCC_HSI48_SUPPORT) +#define TIM_TIM17_TI1_HSI48 0x00000001U /* !< TIM17_TI1 is connected to HSI48/256 */ +#endif +#define TIM_TIM17_TI1_HSE_32 0x00000002U /* !< TIM17_TI1 is connected to HSE div 32 */ +#define TIM_TIM17_TI1_MCO 0x00000003U /* !< TIM17_TI1 is connected to MCO */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM17_TI1_MCO2 0x00000004U /* !< TIM17_TI1 is connected to MCO2 */ +#endif +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__REMAP__) ((((__REMAP__) & 0xFFFC3FFFU) == 0x00000000U)) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP3)) +#elif defined(COMP1) && defined(COMP2) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) +#else +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) +#endif /* COMP1 && COMP2 && COMP3 */ + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h new file mode 100644 index 0000000..f6b0a37 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h @@ -0,0 +1,1718 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_UART_H +#define STM32G0xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + LPUART: + ======= + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock divided by a prescaler + UART: + ===== + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral not initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * It is expected to admit following values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +/** @brief Get UART clok division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on G0 (i.e. 64 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 8000001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32g0xx_hal_uart_ex.h" + + +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_UART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h new file mode 100644 index 0000000..a18e78c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h @@ -0,0 +1,770 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_UART_EX_H +#define STM32G0xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART2) \ + { \ + switch(__HAL_RCC_GET_LPUART2_SOURCE()) \ + { \ + case RCC_LPUART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G0B0xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G081xx) || defined(STM32G071xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G070xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G051xx) || defined(STM32G061xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G030xx) || defined(STM32G050xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_UART_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_usart.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_usart.h new file mode 100644 index 0000000..53bbcdd --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_usart.h @@ -0,0 +1,1087 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_usart.h + * @author MCD Application Team + * @brief Header file of USART HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_USART_H +#define STM32G0xx_HAL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USART_Exported_Types USART Exported Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. + The baud rate is computed using the following formula: + Baud Rate Register[15:4] = ((2 * fclk_pres) / ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * fclk_pres) / ((huart->Init.BaudRate)))[3:0]) >> 1 + where fclk_pres is the USART input clock frequency (fclk) divided by a prescaler. + @note Oversampling by 8 is systematically applied to achieve high baud rates. */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode. */ + + uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity. */ + + uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase. */ + + uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref USART_ClockPrescaler. */ +} USART_InitTypeDef; + +/** + * @brief HAL USART State structures definition + */ +typedef enum +{ + HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */ + HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */ + HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */ + HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_USART_STATE_ERROR = 0x04U /*!< Error */ +} HAL_USART_StateTypeDef; + +/** + * @brief USART clock sources definitions + */ +typedef enum +{ + USART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + USART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + USART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + USART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + USART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} USART_ClockSourceTypeDef; + +/** + * @brief USART handle Structure definition + */ +typedef struct __USART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + USART_InitTypeDef Init; /*!< USART communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< USART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< USART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< USART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< USART Rx Transfer Counter */ + + uint16_t Mask; /*!< USART Rx RDR register mask */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t SlaveMode; /*!< Enable/Disable USART SPI Slave Mode. This parameter can be a value + of @ref USARTEx_Slave_Mode */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. This parameter can be a value + of @ref USARTEx_FIFO_mode. */ + + void (*RxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_USART_StateTypeDef State; /*!< USART communication state */ + + __IO uint32_t ErrorCode; /*!< USART Error code */ + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Complete Callback */ + void (* TxRxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Rx Complete Callback */ + void (* ErrorCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Error Callback */ + void (* AbortCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Abort Complete Callback */ + void (* RxFifoFullCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp Init callback */ + void (* MspDeInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp DeInit callback */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} USART_HandleTypeDef; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL USART Callback ID enumeration definition + */ +typedef enum +{ + HAL_USART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< USART Tx Half Complete Callback ID */ + HAL_USART_TX_COMPLETE_CB_ID = 0x01U, /*!< USART Tx Complete Callback ID */ + HAL_USART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< USART Rx Half Complete Callback ID */ + HAL_USART_RX_COMPLETE_CB_ID = 0x03U, /*!< USART Rx Complete Callback ID */ + HAL_USART_TX_RX_COMPLETE_CB_ID = 0x04U, /*!< USART Tx Rx Complete Callback ID */ + HAL_USART_ERROR_CB_ID = 0x05U, /*!< USART Error Callback ID */ + HAL_USART_ABORT_COMPLETE_CB_ID = 0x06U, /*!< USART Abort Complete Callback ID */ + HAL_USART_RX_FIFO_FULL_CB_ID = 0x07U, /*!< USART Rx Fifo Full Callback ID */ + HAL_USART_TX_FIFO_EMPTY_CB_ID = 0x08U, /*!< USART Tx Fifo Empty Callback ID */ + + HAL_USART_MSPINIT_CB_ID = 0x09U, /*!< USART MspInit callback ID */ + HAL_USART_MSPDEINIT_CB_ID = 0x0AU /*!< USART MspDeInit callback ID */ + +} HAL_USART_CallbackIDTypeDef; + +/** + * @brief HAL USART Callback pointer definition + */ +typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< pointer to an USART callback function */ + +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_Error_Definition USART Error Definition + * @{ + */ +#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_USART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ +#define HAL_USART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ +#define HAL_USART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */ +#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ +#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +#define HAL_USART_ERROR_UDR ((uint32_t)0x00000020U) /*!< SPI slave underrun error */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define HAL_USART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup USART_Stop_Bits USART Number of Stop Bits + * @{ + */ +#define USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< USART frame with 0.5 stop bit */ +#define USART_STOPBITS_1 0x00000000U /*!< USART frame with 1 stop bit */ +#define USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< USART frame with 1.5 stop bits */ +#define USART_STOPBITS_2 USART_CR2_STOP_1 /*!< USART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_Parity USART Parity + * @{ + */ +#define USART_PARITY_NONE 0x00000000U /*!< No parity */ +#define USART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup USART_Mode USART Mode + * @{ + */ +#define USART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define USART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define USART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup USART_Over_Sampling USART Over Sampling + * @{ + */ +#define USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup USART_Clock USART Clock + * @{ + */ +#define USART_CLOCK_DISABLE 0x00000000U /*!< USART clock disable */ +#define USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< USART clock enable */ +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity USART Clock Polarity + * @{ + */ +#define USART_POLARITY_LOW 0x00000000U /*!< Driver enable signal is active high */ +#define USART_POLARITY_HIGH USART_CR2_CPOL /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup USART_Clock_Phase USART Clock Phase + * @{ + */ +#define USART_PHASE_1EDGE 0x00000000U /*!< USART frame phase on first clock transition */ +#define USART_PHASE_2EDGE USART_CR2_CPHA /*!< USART frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup USART_Last_Bit USART Last Bit + * @{ + */ +#define USART_LASTBIT_DISABLE 0x00000000U /*!< USART frame last data bit clock pulse not output to SCLK pin */ +#define USART_LASTBIT_ENABLE USART_CR2_LBCL /*!< USART frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_ClockPrescaler USART Clock Prescaler + * @{ + */ +#define USART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define USART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define USART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define USART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define USART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define USART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define USART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define USART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define USART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define USART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define USART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define USART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ + +/** + * @} + */ + +/** @defgroup USART_Request_Parameters USART Request Parameters + * @{ + */ +#define USART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define USART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup USART_Flags USART Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define USART_FLAG_TXFT USART_ISR_TXFT /*!< USART TXFIFO threshold flag */ +#define USART_FLAG_RXFT USART_ISR_RXFT /*!< USART RXFIFO threshold flag */ +#define USART_FLAG_RXFF USART_ISR_RXFF /*!< USART RXFIFO Full flag */ +#define USART_FLAG_TXFE USART_ISR_TXFE /*!< USART TXFIFO Empty flag */ +#define USART_FLAG_REACK USART_ISR_REACK /*!< USART receive enable acknowledge flag */ +#define USART_FLAG_TEACK USART_ISR_TEACK /*!< USART transmit enable acknowledge flag */ +#define USART_FLAG_BUSY USART_ISR_BUSY /*!< USART busy flag */ +#define USART_FLAG_UDR USART_ISR_UDR /*!< SPI slave underrun error flag */ +#define USART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< USART transmit data register empty */ +#define USART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< USART TXFIFO not full */ +#define USART_FLAG_TC USART_ISR_TC /*!< USART transmission complete */ +#define USART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< USART read data register not empty */ +#define USART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< USART RXFIFO not empty */ +#define USART_FLAG_IDLE USART_ISR_IDLE /*!< USART idle flag */ +#define USART_FLAG_ORE USART_ISR_ORE /*!< USART overrun error */ +#define USART_FLAG_NE USART_ISR_NE /*!< USART noise error */ +#define USART_FLAG_FE USART_ISR_FE /*!< USART frame error */ +#define USART_FLAG_PE USART_ISR_PE /*!< USART parity error */ +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition USART Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ + +#define USART_IT_PE 0x0028U /*!< USART parity error interruption */ +#define USART_IT_TXE 0x0727U /*!< USART transmit data register empty interruption */ +#define USART_IT_TXFNF 0x0727U /*!< USART TX FIFO not full interruption */ +#define USART_IT_TC 0x0626U /*!< USART transmission complete interruption */ +#define USART_IT_RXNE 0x0525U /*!< USART read data register not empty interruption */ +#define USART_IT_RXFNE 0x0525U /*!< USART RXFIFO not empty interruption */ +#define USART_IT_IDLE 0x0424U /*!< USART idle interruption */ +#define USART_IT_ERR 0x0060U /*!< USART error interruption */ +#define USART_IT_ORE 0x0300U /*!< USART overrun error interruption */ +#define USART_IT_NE 0x0200U /*!< USART noise error interruption */ +#define USART_IT_FE 0x0100U /*!< USART frame error interruption */ +#define USART_IT_RXFF 0x183FU /*!< USART RXFIFO full interruption */ +#define USART_IT_TXFE 0x173EU /*!< USART TXFIFO empty interruption */ +#define USART_IT_RXFT 0x1A7CU /*!< USART RXFIFO threshold reached interruption */ +#define USART_IT_TXFT 0x1B77U /*!< USART TXFIFO threshold reached interruption */ + +/** + * @} + */ + +/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags + * @{ + */ +#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define USART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define USART_CLEAR_UDRF USART_ICR_UDRCF /*!< SPI slave underrun error Clear Flag */ +#define USART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO Empty Clear Flag */ +/** + * @} + */ + +/** @defgroup USART_Interruption_Mask USART Interruption Flags Mask + * @{ + */ +#define USART_IT_MASK 0x001FU /*!< USART interruptions flags mask */ +#define USART_CR_MASK 0x00E0U /*!< USART control register mask */ +#define USART_CR_POS 5U /*!< USART control register position */ +#define USART_ISR_MASK 0x1F00U /*!< USART ISR register mask */ +#define USART_ISR_POS 8U /*!< USART ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup USART_Exported_Macros USART Exported Macros + * @{ + */ + +/** @brief Reset USART handle state. + * @param __HANDLE__ USART handle. + * @retval None + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_USART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** @brief Check whether the specified USART flag is set or not. + * @param __HANDLE__ specifies the USART Handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref USART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref USART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref USART_FLAG_RXFF RXFIFO Full flag + * @arg @ref USART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref USART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref USART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref USART_FLAG_BUSY Busy flag + * @arg @ref USART_FLAG_UDR SPI slave underrun error flag + * @arg @ref USART_FLAG_TXE Transmit data register empty flag + * @arg @ref USART_FLAG_TXFNF TXFIFO not full flag + * @arg @ref USART_FLAG_TC Transmission Complete flag + * @arg @ref USART_FLAG_RXNE Receive data register not empty flag + * @arg @ref USART_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref USART_FLAG_IDLE Idle Line detection flag + * @arg @ref USART_FLAG_ORE OverRun Error flag + * @arg @ref USART_FLAG_NE Noise Error flag + * @arg @ref USART_FLAG_FE Framing Error flag + * @arg @ref USART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified USART pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref USART_CLEAR_UDRF SPI slave underrun error Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the USART PE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_PEF) + +/** @brief Clear the USART FE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_FEF) + +/** @brief Clear the USART NE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_NEF) + +/** @brief Clear the USART ORE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_OREF) + +/** @brief Clear the USART IDLE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_IDLEF) + +/** @brief Clear the USART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_TXFECF(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_TXFECF) + +/** @brief Clear SPI slave underrun error flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_UDRFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_UDRF) + +/** @brief Enable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Disable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK)))) + + +/** @brief Check whether the specified USART interrupt has occurred or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & ((uint32_t)0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>> USART_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified USART interrupt source is enabled or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x01U) ? (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x02U) ? (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (0x01U << (((uint16_t)(__INTERRUPT__)) & USART_IT_MASK))) != 0U) ? SET : RESET) + + +/** @brief Clear the specified USART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific USART request flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __REQ__ specifies the request flag to set. + * This parameter can be one of the following values: + * @arg @ref USART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref USART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * + * @retval None + */ +#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup USART_Private_Macros USART Private Macros + * @{ + */ + +/** @brief Get USART clock division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval USART clock division factor + */ +#define USART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ USART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval Division result + */ +#define USART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/USART_GET_DIV_FACTOR(__CLOCKPRESCALER__))*2U)\ + + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Report the USART clock source. + * @param __HANDLE__ specifies the USART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval the USART clocking source, written in __CLOCKSOURCE__. + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#else +#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif + +/** @brief Check USART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on G0 (i.e. 64 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) */ +#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 8000000U) + +/** + * @brief Ensure that USART frame number of stop bits is valid. + * @param __STOPBITS__ USART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_0_5) || \ + ((__STOPBITS__) == USART_STOPBITS_1) || \ + ((__STOPBITS__) == USART_STOPBITS_1_5) || \ + ((__STOPBITS__) == USART_STOPBITS_2)) + +/** + * @brief Ensure that USART frame parity is valid. + * @param __PARITY__ USART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \ + ((__PARITY__) == USART_PARITY_EVEN) || \ + ((__PARITY__) == USART_PARITY_ODD)) + +/** + * @brief Ensure that USART communication mode is valid. + * @param __MODE__ USART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_USART_MODE(__MODE__) ((((__MODE__) & 0xFFFFFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that USART oversampling is valid. + * @param __SAMPLING__ USART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) + +/** + * @brief Ensure that USART clock state is valid. + * @param __CLOCK__ USART clock state. + * @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid) + */ +#define IS_USART_CLOCK(__CLOCK__) (((__CLOCK__) == USART_CLOCK_DISABLE) || \ + ((__CLOCK__) == USART_CLOCK_ENABLE)) + +/** + * @brief Ensure that USART frame polarity is valid. + * @param __CPOL__ USART frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH)) + +/** + * @brief Ensure that USART frame phase is valid. + * @param __CPHA__ USART frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE)) + +/** + * @brief Ensure that USART frame last bit clock pulse setting is valid. + * @param __LASTBIT__ USART frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == USART_LASTBIT_ENABLE)) + +/** + * @brief Ensure that USART request parameter is valid. + * @param __PARAM__ USART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_USART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == USART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == USART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that USART Prescaler is valid. + * @param __CLOCKPRESCALER__ USART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_USART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include USART HAL Extended module */ +#include "stm32g0xx_hal_usart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); +void HAL_USART_MspInit(USART_HandleTypeDef *husart); +void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart); + +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); +void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); +void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart); +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_USART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_usart_ex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_usart_ex.h new file mode 100644 index 0000000..a184a4c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_usart_ex.h @@ -0,0 +1,285 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_usart_ex.h + * @author MCD Application Team + * @brief Header file of USART HAL Extended module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_USART_EX_H +#define STM32G0xx_HAL_USART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup USARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants + * @{ + */ + +/** @defgroup USARTEx_Word_Length USARTEx Word Length + * @{ + */ +#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) /*!< 7-bit long USART frame */ +#define USART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long USART frame */ +#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< 9-bit long USART frame */ +/** + * @} + */ + +/** @defgroup USARTEx_Slave_Select_management USARTEx Slave Select Management + * @{ + */ +#define USART_NSS_HARD 0x00000000U /*!< SPI slave selection depends on NSS input pin */ +#define USART_NSS_SOFT USART_CR2_DIS_NSS /*!< SPI slave is always selected and NSS input pin is ignored */ +/** + * @} + */ + + +/** @defgroup USARTEx_Slave_Mode USARTEx Synchronous Slave mode enable + * @brief USART SLAVE mode + * @{ + */ +#define USART_SLAVEMODE_DISABLE 0x00000000U /*!< USART SPI Slave Mode Enable */ +#define USART_SLAVEMODE_ENABLE USART_CR2_SLVEN /*!< USART SPI Slave Mode Disable */ +/** + * @} + */ + +/** @defgroup USARTEx_FIFO_mode USARTEx FIFO mode + * @brief USART FIFO mode + * @{ + */ +#define USART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define USART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup USARTEx_TXFIFO_threshold_level USARTEx TXFIFO threshold level + * @brief USART TXFIFO level + * @{ + */ +#define USART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define USART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup USARTEx_RXFIFO_threshold_level USARTEx RXFIFO threshold level + * @brief USART RXFIFO level + * @{ + */ +#define USART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define USART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Macros USARTEx Private Macros + * @{ + */ + +/** @brief Compute the USART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the USART Handle. + * @retval None, the mask to apply to USART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define USART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + + +/** + * @brief Ensure that USART frame length is valid. + * @param __LENGTH__ USART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_7B) || \ + ((__LENGTH__) == USART_WORDLENGTH_8B) || \ + ((__LENGTH__) == USART_WORDLENGTH_9B)) + +/** + * @brief Ensure that USART Negative Slave Select (NSS) pin management is valid. + * @param __NSS__ USART Negative Slave Select pin management. + * @retval SET (__NSS__ is valid) or RESET (__NSS__ is invalid) + */ +#define IS_USART_NSS(__NSS__) (((__NSS__) == USART_NSS_HARD) || \ + ((__NSS__) == USART_NSS_SOFT)) + +/** + * @brief Ensure that USART Slave Mode is valid. + * @param __STATE__ USART Slave Mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_SLAVEMODE(__STATE__) (((__STATE__) == USART_SLAVEMODE_DISABLE ) || \ + ((__STATE__) == USART_SLAVEMODE_ENABLE)) + +/** + * @brief Ensure that USART FIFO mode is valid. + * @param __STATE__ USART FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_FIFO_MODE_STATE(__STATE__) (((__STATE__) == USART_FIFOMODE_DISABLE ) || \ + ((__STATE__) == USART_FIFOMODE_ENABLE)) + +/** + * @brief Ensure that USART TXFIFO threshold level is valid. + * @param __THRESHOLD__ USART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that USART RXFIFO threshold level is valid. + * @param __THRESHOLD__ USART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_8_8)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup USARTEx_Exported_Functions_Group1 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart); +void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USARTEx_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig); +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_USART_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_wwdg.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_wwdg.h new file mode 100644 index 0000000..331396f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_wwdg.h @@ -0,0 +1,309 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_wwdg.h + * @author MCD Application Team + * @brief Header file of WWDG HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_WWDG_H +#define STM32G0xx_HAL_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Types WWDG Exported Types + * @{ + */ + +/** + * @brief WWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG. + This parameter can be a value of @ref WWDG_Prescaler */ + + uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter. + This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value. + This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interrupt is enable or not. + This parameter can be a value of @ref WWDG_EWI_Mode */ + +} WWDG_InitTypeDef; + +/** + * @brief WWDG handle Structure definition + */ +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +typedef struct __WWDG_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +{ + WWDG_TypeDef *Instance; /*!< Register base address */ + + WWDG_InitTypeDef Init; /*!< WWDG required parameters */ + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */ + + void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */ +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +} WWDG_HandleTypeDef; + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +/** + * @brief HAL WWDG common Callback ID enumeration definition + */ +typedef enum +{ + HAL_WWDG_EWI_CB_ID = 0x00U, /*!< WWDG EWI callback ID */ + HAL_WWDG_MSPINIT_CB_ID = 0x01U, /*!< WWDG MspInit callback ID */ +} HAL_WWDG_CallbackIDTypeDef; + +/** + * @brief HAL WWDG Callback pointer definition + */ +typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */ + +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Constants WWDG Exported Constants + * @{ + */ + +/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition + * @{ + */ +#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */ +/** + * @} + */ + +/** @defgroup WWDG_Flag_definition WWDG Flag definition + * @brief WWDG Flag definition + * @{ + */ +#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */ +/** + * @} + */ + +/** @defgroup WWDG_Prescaler WWDG Prescaler + * @{ + */ +#define WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/8 */ +#define WWDG_PRESCALER_16 WWDG_CFR_WDGTB_2 /*!< WWDG counter clock = (PCLK1/4096)/16 */ +#define WWDG_PRESCALER_32 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/32 */ +#define WWDG_PRESCALER_64 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/64 */ +#define WWDG_PRESCALER_128 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/128 */ +/** + * @} + */ + +/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode + * @{ + */ +#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */ +#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Private_Macros WWDG Private Macros + * @{ + */ +#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \ + ((__PRESCALER__) == WWDG_PRESCALER_2) || \ + ((__PRESCALER__) == WWDG_PRESCALER_4) || \ + ((__PRESCALER__) == WWDG_PRESCALER_8) || \ + ((__PRESCALER__) == WWDG_PRESCALER_16) || \ + ((__PRESCALER__) == WWDG_PRESCALER_32) || \ + ((__PRESCALER__) == WWDG_PRESCALER_64) || \ + ((__PRESCALER__) == WWDG_PRESCALER_128)) + +#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W)) + +#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T)) + +#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \ + ((__MODE__) == WWDG_EWI_DISABLE)) +/** + * @} + */ + + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Macros WWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the WWDG peripheral. + * @param __HANDLE__ WWDG handle + * @retval None + */ +#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA) + +/** + * @brief Enable the WWDG early wakeup interrupt. + * @param __HANDLE__: WWDG handle + * @param __INTERRUPT__ specifies the interrupt to enable. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early wakeup interrupt + * @note Once enabled this interrupt cannot be disabled except by a system reset. + * @retval None + */ +#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__)) + +/** + * @brief Check whether the selected WWDG interrupt has occurred or not. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the it to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__)) + +/** @brief Clear the WWDG interrupt pending bits. + * bits to clear the selected interrupt pending bits. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + */ +#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__)) + +/** + * @brief Check whether the specified WWDG flag is set or not. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the WWDG's pending flags. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval None + */ +#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Check whether the specified WWDG interrupt source is enabled or not. + * @param __HANDLE__ WWDG Handle. + * @param __INTERRUPT__ specifies the WWDG interrupt source to check. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early Wakeup Interrupt + * @retval state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup WWDG_Exported_Functions + * @{ + */ + +/** @addtogroup WWDG_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup WWDG_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ******************************************************/ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_WWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h new file mode 100644 index 0000000..86d7913 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h @@ -0,0 +1,5164 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_adc.h + * @author MCD Application Team + * @brief Header file of ADC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_ADC_H +#define STM32G0xx_LL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @defgroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Constants ADC Private Constants + * @{ + */ + +/* Internal mask for ADC group regular sequencer: */ +/* To select into literal LL_ADC_REG_RANK_x the relevant bits for: */ +/* - sequencer rank bits position into the selected register */ + +#define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) + +/* Definition of ADC group regular sequencer bits information to be inserted */ +/* into ADC group regular sequencer ranks literals definition. */ +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ1" position in register */ +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ2" position in register */ +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ3" position in register */ +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ4" position in register */ +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ5" position in register */ +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ6" position in register */ +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ7" position in register */ +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (28UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ8" position in register */ + + + +/* Internal mask for ADC group regular trigger: */ +/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */ +/* - regular trigger source */ +/* - regular trigger edge */ +#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CFGR1_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTSEL) << (4U * 0UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 1UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 2UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 3UL)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN) << (4U * 0UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 1UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 2UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 3UL)) ) + +/* Definition of ADC group regular trigger bits information. */ +#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTSEL" position in register */ +#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTEN" position in register */ + + + +/* Internal mask for ADC channel: */ +/* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */ +/* - channel identifier defined by number */ +/* - channel identifier defined by bitfield */ +/* - channel differentiation between external channels (connected to */ +/* GPIO pins) and internal channels (connected to internal paths) */ +#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR1_AWD1CH) +#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_CHSELR_CHSEL) +#define ADC_CHANNEL_ID_NUMBER_MASK_SEQ (ADC_CHSELR_SQ1 << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) /* Value equivalent to ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer, if set to mode "fully configurable", can contain channels with a restricted channel number. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). */ +#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)/* Value equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" position in register */ +#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK | \ + ADC_CHANNEL_ID_INTERNAL_CH_MASK) +/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ +#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (0x0000001FUL) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */ + +/* Channel differentiation between external and internal channels */ +#define ADC_CHANNEL_ID_INTERNAL_CH (0x80000000UL) /* Marker of internal channel */ +#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH) + +/* Definition of channels ID number information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_NUMBER (0x00000000UL) +#define ADC_CHANNEL_1_NUMBER (ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_2_NUMBER (ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_3_NUMBER (ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_4_NUMBER (ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_5_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_6_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_7_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_8_NUMBER (ADC_CFGR1_AWD1CH_3) +#define ADC_CHANNEL_9_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_10_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_11_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_12_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_13_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_14_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_15_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | \ + ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_16_NUMBER (ADC_CFGR1_AWD1CH_4) +#define ADC_CHANNEL_17_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_18_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_1) + +/* Definition of channels ID bitfield information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_BITFIELD (ADC_CHSELR_CHSEL0) +#define ADC_CHANNEL_1_BITFIELD (ADC_CHSELR_CHSEL1) +#define ADC_CHANNEL_2_BITFIELD (ADC_CHSELR_CHSEL2) +#define ADC_CHANNEL_3_BITFIELD (ADC_CHSELR_CHSEL3) +#define ADC_CHANNEL_4_BITFIELD (ADC_CHSELR_CHSEL4) +#define ADC_CHANNEL_5_BITFIELD (ADC_CHSELR_CHSEL5) +#define ADC_CHANNEL_6_BITFIELD (ADC_CHSELR_CHSEL6) +#define ADC_CHANNEL_7_BITFIELD (ADC_CHSELR_CHSEL7) +#define ADC_CHANNEL_8_BITFIELD (ADC_CHSELR_CHSEL8) +#define ADC_CHANNEL_9_BITFIELD (ADC_CHSELR_CHSEL9) +#define ADC_CHANNEL_10_BITFIELD (ADC_CHSELR_CHSEL10) +#define ADC_CHANNEL_11_BITFIELD (ADC_CHSELR_CHSEL11) +#define ADC_CHANNEL_12_BITFIELD (ADC_CHSELR_CHSEL12) +#define ADC_CHANNEL_13_BITFIELD (ADC_CHSELR_CHSEL13) +#define ADC_CHANNEL_14_BITFIELD (ADC_CHSELR_CHSEL14) +#define ADC_CHANNEL_15_BITFIELD (ADC_CHSELR_CHSEL15) +#define ADC_CHANNEL_16_BITFIELD (ADC_CHSELR_CHSEL16) +#define ADC_CHANNEL_17_BITFIELD (ADC_CHSELR_CHSEL17) +#define ADC_CHANNEL_18_BITFIELD (ADC_CHSELR_CHSEL18) + +/* Internal mask for ADC channel sampling time: */ +/* To select into literals LL_ADC_SAMPLINGTIME_x */ +/* the relevant bits for: */ +/* (concatenation of multiple bits used in register SMPR) */ +/* - ADC channels sampling time: setting channel wise, to map each channel */ +/* on one of the common sampling time available. */ +/* - ADC channels common sampling time: set a sampling time into one of the */ +/* common sampling time available. */ +#define ADC_SAMPLING_TIME_CH_MASK (ADC_CHANNEL_ID_BITFIELD_MASK << ADC_SMPR_SMPSEL0_BITOFFSET_POS) +#define ADC_SAMPLING_TIME_SMP_MASK (ADC_SMPR_SMP2 | ADC_SMPR_SMP1) +#define ADC_SAMPLING_TIME_SMP_SHIFT_MASK (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SMPR_SMP1_BITOFFSET_POS) + +/* Internal mask for ADC analog watchdog: */ +/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */ +/* (concatenation of multiple bits used in different analog watchdogs, */ +/* (feature of several watchdogs not available on all STM32 families)). */ +/* - analog watchdog 1: monitored channel defined by number, */ +/* selection of ADC group (ADC group regular). */ +/* - analog watchdog 2 and 3: monitored channel defined by bitfield, no */ +/* selection on groups. */ + +/* Internal register offset for ADC analog watchdog channel configuration */ +#define ADC_AWD_CR1_REGOFFSET (0x00000000UL) +#define ADC_AWD_CR2_REGOFFSET (0x00100000UL) +#define ADC_AWD_CR3_REGOFFSET (0x00200000UL) + +/* Register offset gap between AWD1 and AWD2-AWD3 configuration registers */ +/* (Set separately as ADC_AWD_CRX_REGOFFSET to spare 32 bits space */ +#define ADC_AWD_CR12_REGOFFSETGAP_MASK (ADC_AWD2CR_AWD2CH_0) +#define ADC_AWD_CR12_REGOFFSETGAP_VAL (0x00000024UL) + +#define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET | ADC_AWD_CR2_REGOFFSET | ADC_AWD_CR3_REGOFFSET) +#define ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS (20UL) + +#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) +#define ADC_AWD_CR23_CHANNEL_MASK (ADC_AWD2CR_AWD2CH) +#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR23_CHANNEL_MASK) + +#define ADC_AWD_CRX_REGOFFSET_POS (20UL) /* Position of bits ADC_AWD_CRx_REGOFFSET in ADC_AWD_CRX_REGOFFSET_MASK */ + +/* Internal register offset for ADC analog watchdog threshold configuration */ +#define ADC_AWD_TR1_REGOFFSET (ADC_AWD_CR1_REGOFFSET) +#define ADC_AWD_TR2_REGOFFSET (ADC_AWD_CR2_REGOFFSET) +#define ADC_AWD_TR3_REGOFFSET (ADC_AWD_CR3_REGOFFSET + (1UL << ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS)) +#define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_REGOFFSET | ADC_AWD_TR2_REGOFFSET | ADC_AWD_TR3_REGOFFSET) +#define ADC_AWD_TRX_REGOFFSET_POS (ADC_AWD_CRX_REGOFFSET_POS) /* Position of bits ADC_SQRx_REGOFFSET in ADC_AWD_TRX_REGOFFSET_MASK */ +#define ADC_AWD_TRX_BIT_HIGH_MASK (0x00010000UL) /* Selection of 1 bit to discriminate threshold high: mask of bit */ +#define ADC_AWD_TRX_BIT_HIGH_POS (16UL) /* Selection of 1 bit to discriminate threshold high: position of bit */ +#define ADC_AWD_TRX_BIT_HIGH_SHIFT4 (ADC_AWD_TRX_BIT_HIGH_POS - 4UL) /* Shift of bit ADC_AWD_TRX_BIT_HIGH to position to perform a shift of 4 ranks */ +#define ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS (20UL) + + + +/* ADC registers bits positions */ +#define ADC_CFGR1_RES_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CFGR1_RES" position in register */ +#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22UL) /* Value equivalent to bitfield "ADC_CFGR1_AWDSGL" position in register */ +#define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_TR1_HT1" position in register */ +#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL0" position in register */ +#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL1" position in register */ +#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL2" position in register */ +#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL3" position in register */ +#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL4" position in register */ +#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL5" position in register */ +#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL6" position in register */ +#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL7" position in register */ +#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL8" position in register */ +#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL9" position in register */ +#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL10" position in register */ +#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL11" position in register */ +#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL12" position in register */ +#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL13" position in register */ +#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL14" position in register */ +#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL15" position in register */ +#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL16" position in register */ +#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL17" position in register */ +#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL18" position in register */ +#define ADC_SMPR_SMP1_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SMPR_SMP1" position in register */ +#define ADC_SMPR_SMP2_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_SMPR_SMP2" position in register */ +#define ADC_SMPR_SMPSEL0_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_SMPR_SMPSEL0" position in register */ + + +/* ADC registers bits groups */ +#define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": Software can read as well as set this bit. Writing '0' has no effect on the bit value. */ + + +/* ADC internal channels related definitions */ +/* Internal voltage reference VrefInt */ +#define VREFINT_CAL_ADDR ((uint16_t*) (0x1FFF75AAUL)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define VREFINT_CAL_VREF ( 3000UL) /* Analog voltage reference (Vref+) voltage with which VrefInt has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ +/* Temperature sensor */ +#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) (0x1FFF75A8UL)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32G0, temperature sensor ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL2_ADDR ((uint16_t*) (0x1FFF75CAUL)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32G0, temperature sensor ADC raw data acquired at temperature 130 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL1_TEMP (( int32_t) 30) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL2_TEMP (( int32_t) 130) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL_VREFANALOG ( 3000UL) /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Macros ADC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of ADC common parameters + * and multimode + * (all ADC instances belonging to the same ADC common instance). + * @note The setting of these parameters by function @ref LL_ADC_CommonInit() + * is conditioned to ADC instances state (all ADC instances + * sharing the same ADC common instance): + * All ADC instances sharing the same ADC common instance must be + * disabled. + */ +typedef struct +{ + uint32_t CommonClock; /*!< Set parameter common to several ADC: Clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetCommonClock(). */ + +} LL_ADC_CommonInitTypeDef; + +/** + * @brief Structure definition of some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t Clock; /*!< Set ADC instance clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_CLOCK_SOURCE + @note On this STM32 series, this parameter has some clock ratio constraints: + ADC clock synchronous (from PCLK) with prescaler 1 must be enabled only if PCLK has a 50% duty clock cycle + (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle). + + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetClock(). + For more details, refer to description of this function. */ + + uint32_t Resolution; /*!< Set ADC resolution. + This parameter can be a value of @ref ADC_LL_EC_RESOLUTION + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */ + + uint32_t DataAlignment; /*!< Set ADC conversion data alignment. + This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetDataAlignment(). */ + + uint32_t LowPowerMode; /*!< Set ADC low power mode. + This parameter can be a value of @ref ADC_LL_EC_LP_MODE + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetLowPowerMode(). */ + +} LL_ADC_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_REG_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external peripheral (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE + @note On this STM32 series, setting trigger source to external trigger also set trigger polarity to rising edge + (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value). + In case of need to modify trigger edge, use function @ref LL_ADC_REG_SetTriggerEdge(). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group regular sequencer length. + @note This parameter has an effect only if group regular sequencer is set to mode "fully configurable". Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE + @note This parameter has an effect only if group regular sequencer is enabled + (depending on the sequencer mode: scan length of 2 ranks or more, or several ADC channels enabled in group regular sequencer. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable() ). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerDiscont(). */ + + uint32_t ContinuousMode; /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically). + This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE + Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode. + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetContinuousMode(). */ + + uint32_t DMATransfer; /*!< Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode. + This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetDMATransfer(). */ + + uint32_t Overrun; /*!< Set ADC group regular behavior in case of overrun: + data preserved or overwritten. + This parameter can be a value of @ref ADC_LL_EC_REG_OVR_DATA_BEHAVIOR + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetOverrun(). */ + +} LL_ADC_REG_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_LL_EC_FLAG ADC flags + * @brief Flags defines which can be used with LL_ADC_ReadReg function + * @{ + */ +#define LL_ADC_FLAG_ADRDY ADC_ISR_ADRDY /*!< ADC flag ADC instance ready */ +#define LL_ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC flag ADC channel configuration ready */ +#define LL_ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC flag ADC group regular end of unitary conversion */ +#define LL_ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC flag ADC group regular end of sequence conversions */ +#define LL_ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC flag ADC group regular overrun */ +#define LL_ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC flag ADC group regular end of sampling phase */ +#define LL_ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC flag ADC analog watchdog 1 */ +#define LL_ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC flag ADC analog watchdog 2 */ +#define LL_ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC flag ADC analog watchdog 3 */ +#define LL_ADC_FLAG_EOCAL ADC_ISR_EOCAL /*!< ADC flag end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable) + * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions + * @{ + */ +#define LL_ADC_IT_ADRDY ADC_IER_ADRDYIE /*!< ADC interruption ADC instance ready */ +#define LL_ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC interruption channel configuration ready */ +#define LL_ADC_IT_EOC ADC_IER_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion */ +#define LL_ADC_IT_EOS ADC_IER_EOSIE /*!< ADC interruption ADC group regular end of sequence conversions */ +#define LL_ADC_IT_OVR ADC_IER_OVRIE /*!< ADC interruption ADC group regular overrun */ +#define LL_ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC interruption ADC group regular end of sampling phase */ +#define LL_ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC interruption ADC analog watchdog 1 */ +#define LL_ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC interruption ADC analog watchdog 2 */ +#define LL_ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC interruption ADC analog watchdog 3 */ +#define LL_ADC_IT_EOCAL ADC_IER_EOCALIE /*!< ADC interruption ADC end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REGISTERS ADC registers compliant with specific purpose + * @{ + */ +/* List of ADC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */ +#define LL_ADC_DMA_REG_REGULAR_DATA (0x00000000UL) /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define LL_ADC_CLOCK_ASYNC_DIV1 (0x00000000UL) /*!< ADC asynchronous clock without prescaler */ +#define LL_ADC_CLOCK_ASYNC_DIV2 (ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 2. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV4 (ADC_CCR_PRESC_1 ) /*!< ADC asynchronous clock with prescaler division by 4. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV6 (ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 6. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV8 (ADC_CCR_PRESC_2 ) /*!< ADC asynchronous clock with prescaler division by 8. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV10 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 10. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV12 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 ) /*!< ADC asynchronous clock with prescaler division by 12. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV16 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 16. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV32 (ADC_CCR_PRESC_3) /*!< ADC asynchronous clock with prescaler division by 32. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV64 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 64. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV128 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with prescaler division by 128. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV256 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 256. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_FREQ_MODE ADC common - Clock frequency mode + * @{ + */ +#define LL_ADC_CLOCK_FREQ_MODE_HIGH (0x00000000UL) /*!< ADC clock mode to high frequency. On STM32G0, ADC clock frequency above 3.5MHz. */ +#define LL_ADC_CLOCK_FREQ_MODE_LOW (ADC_CCR_LFMEN) /*!< ADC clock mode to low frequency. On STM32G0, ADC clock frequency below 3.5MHz. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels + * @{ + */ +/* Note: Other measurement paths to internal channels may be available */ +/* (connections to other peripherals). */ +/* If they are not listed below, they do not require any specific */ +/* path enable. In this case, Access to measurement path is done */ +/* only by selecting the corresponding ADC internal channel. */ +#define LL_ADC_PATH_INTERNAL_NONE (0x00000000UL) /*!< ADC measurement paths all disabled */ +#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_VREFEN) /*!< ADC measurement path to internal channel VrefInt */ +#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSEN) /*!< ADC measurement path to internal channel temperature sensor */ +#define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATEN) /*!< ADC measurement path to internal channel Vbat */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CLOCK_SOURCE ADC instance - Clock source + * @{ + */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by 4 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by 2 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV1 (ADC_CFGR2_CKMODE_1 | ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock not divided */ +#define LL_ADC_CLOCK_ASYNC (0x00000000UL) /*!< ADC asynchronous clock. Asynchronous clock prescaler can be configured using function @ref LL_ADC_SetCommonClock(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define LL_ADC_RESOLUTION_12B (0x00000000UL) /*!< ADC resolution 12 bits */ +#define LL_ADC_RESOLUTION_10B ( ADC_CFGR1_RES_0) /*!< ADC resolution 10 bits */ +#define LL_ADC_RESOLUTION_8B (ADC_CFGR1_RES_1 ) /*!< ADC resolution 8 bits */ +#define LL_ADC_RESOLUTION_6B (ADC_CFGR1_RES_1 | ADC_CFGR1_RES_0) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment + * @{ + */ +#define LL_ADC_DATA_ALIGN_RIGHT (0x00000000UL) /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR1_ALIGN) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_LP_MODE ADC instance - Low power mode + * @{ + */ +#define LL_ADC_LP_MODE_NONE (0x00000000UL) /*!< No ADC low power mode activated */ +#define LL_ADC_LP_AUTOWAIT (ADC_CFGR1_WAIT) /*!< ADC low power mode auto delay: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOPOWEROFF (ADC_CFGR1_AUTOFF) /*!< ADC low power mode auto power-off: the ADC automatically powers-off after a ADC conversion and automatically wakes up when a new ADC conversion is triggered (with startup time between trigger and start of sampling). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF) /*!< ADC low power modes auto wait and auto power-off combined. See description with function @ref LL_ADC_SetLowPowerMode(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define LL_ADC_TRIGGER_FREQ_HIGH (0x00000000UL) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define LL_ADC_TRIGGER_FREQ_LOW (ADC_CFGR2_LFTRIG) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define LL_ADC_SAMPLINGTIME_COMMON_1 (ADC_SMPR_SMP1_BITOFFSET_POS) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define LL_ADC_SAMPLINGTIME_COMMON_2 (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SAMPLING_TIME_CH_MASK) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define LL_ADC_GROUP_REGULAR (0x00000001UL) /*!< ADC group regular (available on all STM32 devices) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ +#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ +#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ +#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER | ADC_CHANNEL_3_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */ +#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER | ADC_CHANNEL_4_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */ +#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER | ADC_CHANNEL_5_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */ +#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER | ADC_CHANNEL_6_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */ +#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER | ADC_CHANNEL_7_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */ +#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER | ADC_CHANNEL_8_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */ +#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER | ADC_CHANNEL_9_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */ +#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */ +#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */ +#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */ +#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */ +#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */ +#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ +#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ +#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ +#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_13 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_12 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. */ +#define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_14 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source + * @{ + */ +#define LL_ADC_REG_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group regular conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 ( ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH4 ( ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#if defined(TIM2) +#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#if defined(TIM4) +#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM6) +#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM15) +#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge + * @{ + */ +#define LL_ADC_REG_TRIG_EXT_RISING ( ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to rising edge */ +#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CFGR1_EXTEN_1 ) /*!< ADC group regular conversion trigger polarity set to falling edge */ +#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CFGR1_EXTEN_1 | ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode + * @{ + */ +#define LL_ADC_REG_CONV_SINGLE (0x00000000UL) /*!< ADC conversions are performed in single mode: one conversion per trigger */ +#define LL_ADC_REG_CONV_CONTINUOUS (ADC_CFGR1_CONT) /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data + * @{ + */ +#define LL_ADC_REG_DMA_TRANSFER_NONE (0x00000000UL) /*!< ADC conversions are not transferred by DMA */ +#define LL_ADC_REG_DMA_TRANSFER_LIMITED ( ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */ +#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define LL_ADC_REG_OVR_DATA_PRESERVED (0x00000000UL) /*!< ADC group regular behavior in case of overrun: data preserved */ +#define LL_ADC_REG_OVR_DATA_OVERWRITTEN (ADC_CFGR1_OVRMOD) /*!< ADC group regular behavior in case of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_MODE ADC group regular - Sequencer configuration flexibility + * @{ + */ +#define LL_ADC_REG_SEQ_FIXED (0x00000000UL) /*!< Sequencer configured to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number. Refer to description of function @ref LL_ADC_REG_SetSequencerChannels(). */ +#define LL_ADC_REG_SEQ_CONFIGURABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer configured to fully configurable: sequencer length and each rank affectation to a channel are configurable. Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DISABLE (ADC_CHSELR_SQ2) /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS (ADC_CHSELR_SQ3) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS (ADC_CHSELR_SQ4) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS (ADC_CHSELR_SQ5) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS (ADC_CHSELR_SQ6) /*!< ADC group regular sequencer enable with 5 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS (ADC_CHSELR_SQ7) /*!< ADC group regular sequencer enable with 6 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS (ADC_CHSELR_SQ8) /*!< ADC group regular sequencer enable with 7 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS (0x00000000UL) /*!< ADC group regular sequencer enable with 8 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_DIRECTION ADC group regular - Sequencer scan direction + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DIR_FORWARD (0x00000000UL) /*!< On this STM32 series, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction forward: from lowest channel number to highest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer). On some other STM32 families, this setting is not available and the default scan direction is forward. */ +#define LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD (ADC_CFGR1_SCANDIR) /*!< On this STM32 series, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction backward: from highest channel number to lowest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_REG_SEQ_DISCONT_DISABLE (0x00000000UL) /*!< ADC group regular sequencer discontinuous mode disable */ +#define LL_ADC_REG_SEQ_DISCONT_1RANK (ADC_CFGR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define LL_ADC_REG_RANK_1 (ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 1 */ +#define LL_ADC_REG_RANK_2 (ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 2 */ +#define LL_ADC_REG_RANK_3 (ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 3 */ +#define LL_ADC_REG_RANK_4 (ADC_REG_RANK_4_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 4 */ +#define LL_ADC_REG_RANK_5 (ADC_REG_RANK_5_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 5 */ +#define LL_ADC_REG_RANK_6 (ADC_REG_RANK_6_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 6 */ +#define LL_ADC_REG_RANK_7 (ADC_REG_RANK_7_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 7 */ +#define LL_ADC_REG_RANK_8 (ADC_REG_RANK_8_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define LL_ADC_SAMPLINGTIME_1CYCLE_5 (0x00000000UL) /*!< Sampling time 1.5 ADC clock cycle */ +#define LL_ADC_SAMPLINGTIME_3CYCLES_5 (ADC_SMPR_SMP1_0) /*!< Sampling time 3.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_7CYCLES_5 (ADC_SMPR_SMP1_1) /*!< Sampling time 7.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_12CYCLES_5 (ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 12.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_19CYCLES_5 (ADC_SMPR_SMP1_2) /*!< Sampling time 19.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_39CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_0) /*!< Sampling time 39.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_79CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1) /*!< Sampling time 79.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_160CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */ +#define LL_ADC_AWD2 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */ +#define LL_ADC_AWD3 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels + * @{ + */ +#define LL_ADC_AWD_DISABLE (0x00000000UL) /*!< ADC analog watchdog monitoring disabled */ +#define LL_ADC_AWD_ALL_CHANNELS_REG (ADC_AWD_CR23_CHANNEL_MASK | ADC_CFGR1_AWD1EN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */ +#define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds + * @{ + */ +#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_TR1_HT1 ) /*!< ADC analog watchdog threshold high */ +#define LL_ADC_AWD_THRESHOLD_LOW ( ADC_TR1_LT1) /*!< ADC analog watchdog threshold low */ +#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_TR1_HT1 | ADC_TR1_LT1) /*!< ADC analog watchdog both thresholds high and low concatenated into the same data */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SCOPE Oversampling - Oversampling scope + * @{ + */ +#define LL_ADC_OVS_DISABLE (0x00000000UL) /*!< ADC oversampling disabled. */ +#define LL_ADC_OVS_GRP_REGULAR_CONTINUED ( ADC_CFGR2_OVSE) /*!< ADC oversampling on conversions of ADC group regular. Literal suffix "continued" is kept for compatibility with other STM32 devices featuring ADC group injected, in this case other oversampling scope parameters are available. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define LL_ADC_OVS_REG_CONT (0x00000000UL) /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */ +#define LL_ADC_OVS_REG_DISCONT (ADC_CFGR2_TOVS) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define LL_ADC_OVS_RATIO_2 (0x00000000UL) /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_4 ( ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_8 ( ADC_CFGR2_OVSR_1 ) /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_16 ( ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_32 (ADC_CFGR2_OVSR_2 ) /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_64 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_128 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 ) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_256 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +#define LL_ADC_OVS_SHIFT_NONE (0x00000000UL) /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_1 ( ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_2 ( ADC_CFGR2_OVSS_1 ) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_3 ( ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_4 ( ADC_CFGR2_OVSS_2 ) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_5 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_6 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 ) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_7 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_8 (ADC_CFGR2_OVSS_3 ) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HELPER_MACRO Definitions of constants used by helper macro + * @{ + */ +#define LL_ADC_TEMPERATURE_CALC_ERROR ((int16_t)0x7FFF) /* Temperature calculation error using helper macro @ref __LL_ADC_CALC_TEMPERATURE(), due to issue on calibration parameters. This value is coded on 16 bits (to fit on signed word or double word) and corresponds to an inconsistent temperature value. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HW_DELAYS Definitions of ADC hardware constraints delays + * @note Only ADC peripheral HW delays are defined in ADC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values. */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Indications for estimation of ADC timeout delays, for this */ +/* STM32 series: */ +/* - ADC calibration time: maximum delay is 82/fADC. */ +/* (refer to device datasheet, parameter "tCAL") */ +/* - ADC enable time: maximum delay is 1 conversion cycle. */ +/* (refer to device datasheet, parameter "tSTAB") */ +/* - ADC disable time: maximum delay should be a few ADC clock cycles */ +/* - ADC stop conversion time: maximum delay should be a few ADC clock */ +/* cycles */ +/* - ADC conversion time: duration depending on ADC clock and ADC */ +/* configuration. */ +/* (refer to device reference manual, section "Timing") */ + +/* Delay for ADC stabilization time (ADC voltage regulator start-up time) */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tADCVREG_STUP"). */ +/* Unit: us */ +#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL) /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */ + +/* Delay for internal voltage reference stabilization time. */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tstart_vrefint"). */ +/* Unit: us */ +#define LL_ADC_DELAY_VREFINT_STAB_US ( 12UL) /*!< Delay for internal voltage reference stabilization time */ + +/* Delay for temperature sensor stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (120UL) /*!< Delay for temperature sensor stabilization time (starting from temperature sensor enable, refer to @ref LL_ADC_SetCommonPathInternalCh()) */ +#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL) /*!< Delay for temperature sensor buffer stabilization time (starting from ADC enable, refer to @ref LL_ADC_Enable()) */ + +/* Delay required between ADC end of calibration and ADC enable. */ +/* Note: On this STM32 series, a minimum number of ADC clock cycles */ +/* are required between ADC end of calibration and ADC enable. */ +/* Wait time can be computed in user application by waiting for the */ +/* equivalent number of CPU cycles, by taking into account */ +/* ratio of CPU clock versus ADC clock prescalers. */ +/* Unit: ADC clock cycles. */ +#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES ( 2UL) /*!< Delay required between ADC end of calibration and ADC enable */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals LL_ADC_CHANNEL_x. + * @note Example: + * __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((((__CHANNEL__) & ADC_CHANNEL_ID_BITFIELD_MASK) == 0UL) ? \ + ( \ + ((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS \ + ) \ + : \ + ((((__CHANNEL__) & ADC_CHANNEL_0_BITFIELD) == ADC_CHANNEL_0_BITFIELD) ? (0UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_1_BITFIELD) == ADC_CHANNEL_1_BITFIELD) ? (1UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_2_BITFIELD) == ADC_CHANNEL_2_BITFIELD) ? (2UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_3_BITFIELD) == ADC_CHANNEL_3_BITFIELD) ? (3UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_4_BITFIELD) == ADC_CHANNEL_4_BITFIELD) ? (4UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_5_BITFIELD) == ADC_CHANNEL_5_BITFIELD) ? (5UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_6_BITFIELD) == ADC_CHANNEL_6_BITFIELD) ? (6UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_7_BITFIELD) == ADC_CHANNEL_7_BITFIELD) ? (7UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_8_BITFIELD) == ADC_CHANNEL_8_BITFIELD) ? (8UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_9_BITFIELD) == ADC_CHANNEL_9_BITFIELD) ? (9UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_10_BITFIELD) == ADC_CHANNEL_10_BITFIELD) ? (10UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_11_BITFIELD) == ADC_CHANNEL_11_BITFIELD) ? (11UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_12_BITFIELD) == ADC_CHANNEL_12_BITFIELD) ? (12UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_13_BITFIELD) == ADC_CHANNEL_13_BITFIELD) ? (13UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_14_BITFIELD) == ADC_CHANNEL_14_BITFIELD) ? (14UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_15_BITFIELD) == ADC_CHANNEL_15_BITFIELD) ? (15UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_16_BITFIELD) == ADC_CHANNEL_16_BITFIELD) ? (16UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_17_BITFIELD) == ADC_CHANNEL_17_BITFIELD) ? (17UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_18_BITFIELD) == ADC_CHANNEL_18_BITFIELD) ? (18UL) : \ + (0UL))))))))))))))))))))) + +/** + * @brief Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "LL_ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_CHSELR_CHSEL0 << (__DECIMAL_NB__))) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0UL) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + */ +#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + (((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT)) + +/** + * @brief Helper macro to define ADC analog watchdog parameter: + * define a single channel to monitor with analog watchdog + * from sequencer channel and groups definition. + * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels(). + * Example: + * LL_ADC_SetAnalogWDMonitChannels( + * ADC1, LL_ADC_AWD1, + * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR)) + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * @param __GROUP__ This parameter can be one of the following values: + * @arg @ref LL_ADC_GROUP_REGULAR + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VBAT_REG + */ +#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + +/** + * @brief Helper macro to set the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_ConfigAnalogWDThresholds() + * or @ref LL_ADC_SetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to set the value of + * analog watchdog threshold high (on 8 bits): + * LL_ADC_SetAnalogWDThresholds + * (< ADCx param >, + * __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, ) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \ + ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to get the value of + * analog watchdog threshold high (on 8 bits): + * < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION + * (LL_ADC_RESOLUTION_8B, + * LL_ADC_GetAnalogWDThresholds(, LL_ADC_AWD_THRESHOLD_HIGH) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \ + ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the ADC analog watchdog threshold high + * or low from raw value containing both thresholds concatenated. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, to get analog watchdog threshold high from the register raw value: + * __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(LL_ADC_AWD_THRESHOLD_HIGH, ); + * @param __AWD_THRESHOLD_TYPE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param __AWD_THRESHOLDS__ Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__) \ + (((__AWD_THRESHOLDS__) >> (((__AWD_THRESHOLD_TYPE__) & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)) & LL_ADC_AWD_THRESHOLD_LOW) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __LL_ADC_COMMON_INSTANCE(__ADCx__) \ + (ADC1_COMMON) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + LL_ADC_IsEnabled(ADC1) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value (unit: digital value of ADC conversion data) + */ +#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + (0xFFFUL >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of the data to be converted + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +(((__DATA__) \ + << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) \ + >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL)) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ +) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ + / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + * In case or error, value LL_ADC_TEMPERATURE_CALC_ERROR is returned (inconsistent temperature value) + */ +#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__)\ +((((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) != 0) ? \ + (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ + * (__VREFANALOG_VOLTAGE__)) \ + / TEMPSENSOR_CAL_VREFANALOG) \ + - (int32_t) *TEMPSENSOR_CAL1_ADDR) \ + ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP) \ + ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \ + ) + TEMPSENSOR_CAL1_TEMP \ + ) \ + : \ + ((int32_t)LL_ADC_TEMPERATURE_CALC_ERROR) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12 bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32G0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32G0, refer to device datasheet parameter "V30" (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((((int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__)) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)) \ + * 1000UL) \ + - \ + (int32_t)(((__TEMPSENSOR_TYP_CALX_V__)) \ + * 1000UL) \ + ) \ + ) / (int32_t)(__TEMPSENSOR_TYP_AVGSLOPE__) \ + ) + (int32_t)(__TEMPSENSOR_CALX_TEMP__) \ +) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management + * @{ + */ +/* Note: LL ADC functions to set DMA transfer are located into sections of */ +/* configuration of ADC instance, groups and multimode (if available): */ +/* @ref LL_ADC_REG_SetDMATransfer(), ... */ + +/** + * @brief Function to help to configure DMA transfer from ADC: retrieve the + * ADC register address from ADC instance and a list of ADC registers + * intended to be used (most commonly) with DMA transfer. + * @note These ADC registers are data registers: + * when ADC conversion data is available in ADC data registers, + * ADC generates a DMA transfer request. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA), + * (uint32_t)&< array or variable >, + * LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + * @note For devices with several ADC: in multimode, some devices + * use a different data register outside of ADC instance scope + * (common data register). This macro manages this register difference, + * only ADC instance has to be set as parameter. + * @rmtoll DR DATA LL_ADC_DMA_GetRegAddr + * @param ADCx ADC instance + * @param Register This parameter can be one of the following values: + * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA + * @retval ADC register address + */ +__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register) +{ + /* Prevent unused argument(s) compilation warning */ + (void)(Register); + + /* Retrieve address of register DR */ + return (uint32_t) &(ADCx->DR); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several ADC instances + * @{ + */ + +/** + * @brief Set parameter common to several ADC: Clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR PRESC LL_ADC_SetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonClock This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_PRESC, CommonClock); +} + +/** + * @brief Get parameter common to several ADC: Clock source and prescaler. + * @rmtoll CCR PRESC LL_ADC_GetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_PRESC)); +} + +/** + * @brief Legacy feature, useless on STM32G0 (ADC common clock low frequency + mode is automatically managed by ADC peripheral on STM32G0). + Function kept for legacy purpose. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CCR LFMEN LL_ADC_SetCommonFrequencyMode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_HIGH + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonFrequencyMode(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonFrequencyMode) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_LFMEN, CommonFrequencyMode); +} + +/** + * @brief Legacy feature, useless on STM32G0 (ADC common clock low frequency + mode is automatically managed by ADC peripheral on STM32G0). + Function kept for legacy purpose. + * @rmtoll CCR LFMEN LL_ADC_GetCommonFrequencyMode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_HIGH + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonFrequencyMode(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_LFMEN)); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Configure all paths (overwrite current configuration). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalCh\n + * CCR TSEN LL_ADC_SetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_SetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Add paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR TSEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChAdd + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChAdd(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + SET_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Remove paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChRem\n + * CCR TSEN LL_ADC_SetCommonPathInternalChRem\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChRem + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChRem(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + CLEAR_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Get parameter common to several ADC: measurement path to internal + * channels (VrefInt, temperature sensor, ...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @rmtoll CCR VREFEN LL_ADC_GetCommonPathInternalCh\n + * CCR TSEN LL_ADC_GetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_GetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Set ADC instance clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 CKMODE LL_ADC_SetClock + * @param ADCx ADC instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be configured using + * function @ref LL_ADC_SetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetClock(ADC_TypeDef *ADCx, uint32_t ClockSource) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_CKMODE, ClockSource); +} + +/** + * @brief Get ADC instance clock source and prescaler. + * @rmtoll CFGR2 CKMODE LL_ADC_GetClock + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be retrieved using + * function @ref LL_ADC_GetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + */ +__STATIC_INLINE uint32_t LL_ADC_GetClock(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_CKMODE)); +} + +/** + * @brief Set ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note This function is intended to set calibration parameters + * without having to perform a new calibration using + * @ref LL_ADC_StartCalibration(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled, without calibration on going, without conversion + * on going on group regular. + * @rmtoll CALFACT CALFACT LL_ADC_SetCalibrationFactor + * @param ADCx ADC instance + * @param CalibrationFactor Value between Min_Data=0x00 and Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t CalibrationFactor) +{ + MODIFY_REG(ADCx->CALFACT, + ADC_CALFACT_CALFACT, + CalibrationFactor); +} + +/** + * @brief Get ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note Calibration factors are set by hardware after performing + * a calibration run using function @ref LL_ADC_StartCalibration(). + * @rmtoll CALFACT CALFACT LL_ADC_GetCalibrationFactor + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7F + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT)); +} + +/** + * @brief Set ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 RES LL_ADC_SetResolution + * @param ADCx ADC instance + * @param Resolution This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_RES, Resolution); +} + +/** + * @brief Get ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 RES LL_ADC_GetResolution + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + */ +__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_RES)); +} + +/** + * @brief Set ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 ALIGN LL_ADC_SetDataAlignment + * @param ADCx ADC instance + * @param DataAlignment This parameter can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_ALIGN, DataAlignment); +} + +/** + * @brief Get ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 ALIGN LL_ADC_GetDataAlignment + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + */ +__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_ALIGN)); +} + +/** + * @brief Set ADC low power mode. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 WAIT LL_ADC_SetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_SetLowPowerMode + * @param ADCx ADC instance + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPowerMode) +{ + MODIFY_REG(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF), LowPowerMode); +} + +/** + * @brief Get ADC low power mode: + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @rmtoll CFGR1 WAIT LL_ADC_GetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_GetLowPowerMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF))); +} + +/** + * @brief Set ADC trigger frequency mode. + * @note ADC trigger frequency mode must be set to low frequency when + * a duration is exceeded before ADC conversion start trigger event + * (between ADC enable and ADC conversion start trigger event + * or between two ADC conversion start trigger event). + * Duration value: Refer to device datasheet, parameter "tIdle". + * @note When ADC trigger frequency mode is set to low frequency, + * some rearm cycles are inserted before performing ADC conversion + * start, inducing a delay of 2 ADC clock cycles. + * @note Usage of ADC trigger frequency mode with ADC low power mode: + * - Low power mode auto wait: Only the first ADC conversion + * start trigger inserts the rearm delay. + * - Low power mode auto power-off: ADC trigger frequency mode + * is discarded. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 LFTRIG LL_ADC_SetTriggerFrequencyMode + * @param ADCx ADC instance + * @param TriggerFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetTriggerFrequencyMode(ADC_TypeDef *ADCx, uint32_t TriggerFrequencyMode) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_LFTRIG, TriggerFrequencyMode); +} + +/** + * @brief Get ADC trigger frequency mode. + * @rmtoll CFGR2 LFTRIG LL_ADC_GetTriggerFrequencyMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetTriggerFrequencyMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_LFTRIG)); +} + +/** + * @brief Set sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 families, sampling time is channel wise) + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 series, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMP1 LL_ADC_SetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_SetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @param SamplingTime This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY, + uint32_t SamplingTime) +{ + MODIFY_REG(ADCx->SMPR, + ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK), + SamplingTime << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @brief Get sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 families, sampling time is channel wise) + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMP1 LL_ADC_GetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_GetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + */ +__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY) +{ + return (uint32_t)((READ_BIT(ADCx->SMPR, ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK))) + >> (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Set ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note On this STM32 series, setting trigger source to external trigger + * also set trigger polarity to rising edge + * (default setting for compatibility with some ADC on other + * STM32 families having this setting set by HW default value). + * In case of need to modify trigger edge, use + * function @ref LL_ADC_REG_SetTriggerEdge(). + * @note On this STM32 series, ADC trigger frequency mode must be set + * in function of frequency of ADC group regular conversion trigger. + * Refer to description of function + * @ref LL_ADC_SetTriggerFrequencyMode(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_SetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32G0, parameter not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL, TriggerSource); +} + +/** + * @brief Get ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note To determine whether group regular trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)") + * use function @ref LL_ADC_REG_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_GetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32G0, parameter not available on all devices + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) +{ + __IO uint32_t TriggerSource = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CFGR1_EXTEN {0; 1; 2; 3}. */ + uint32_t ShiftExten = ((TriggerSource & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL)); + + /* Set bitfield corresponding to ADC_CFGR1_EXTEN and ADC_CFGR1_EXTSEL */ + /* to match with triggers literals definition. */ + return ((TriggerSource + & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR1_EXTSEL) + | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR1_EXTEN) + ); +} + +/** + * @brief Get ADC group regular conversion trigger source internal (SW start) + * or external. + * @note In case of group regular trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_REG_GetTriggerSource(). + * @rmtoll CFGR1 EXTEN LL_ADC_REG_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN)) ? 1UL : 0UL); +} + +/** + * @brief Set ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_SetTriggerEdge + * @param ADCx ADC instance + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN, ExternalTriggerEdge); +} + +/** + * @brief Get ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN)); +} + +/** + * @brief Set ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @param Configurability This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerConfigurable(ADC_TypeDef *ADCx, uint32_t Configurability) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD, Configurability); +} + +/** + * @brief Get ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerConfigurable(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD)); +} + +/** + * @brief Set ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + SET_BIT(ADCx->CHSELR, SequencerNbRanks); +} + +/** + * @brief Get ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx) +{ + __IO uint32_t ChannelsRanks = READ_BIT(ADCx->CHSELR, ADC_CHSELR_SQ_ALL); + uint32_t SequencerLength = LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS; + uint32_t RankIndex; + + /* Parse register for end of sequence identifier */ + for (RankIndex = 0UL; RankIndex < (32U - 4U); RankIndex += 4U) + { + if ((ChannelsRanks & (ADC_CHSELR_SQ2 << RankIndex)) == (ADC_CHSELR_SQ2 << RankIndex)) + { + SequencerLength = (ADC_CHSELR_SQ2 << RankIndex); + break; + } + } + + return SequencerLength; +} + +/** + * @brief Set ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 series, this setting is not available and + * the default scan direction is forward. + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_SetSequencerScanDirection + * @param ADCx ADC instance + * @param ScanDirection This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerScanDirection(ADC_TypeDef *ADCx, uint32_t ScanDirection) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_SCANDIR, ScanDirection); +} + +/** + * @brief Get ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 families, this setting is not available and + * the default scan direction is forward. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_GetSequencerScanDirection + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerScanDirection(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_SCANDIR)); +} + +/** + * @brief Set ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_SetSequencerDiscont\n + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DISCEN, SeqDiscont); +} + +/** + * @brief Get ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_GetSequencerDiscont\n + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DISCEN)); +} + +/** + * @brief Set ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note This function performs configuration of: + * - Channels ordering into each rank of scan sequence: + * whatever channel can be placed into whatever rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK), + ((Channel & ADC_CHANNEL_ID_NUMBER_MASK_SEQ) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) +{ + return (uint32_t)((READ_BIT(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) + >> (Rank & ADC_REG_RANK_ID_SQRX_MASK) + ) << (ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ); +} + +/** + * @brief Set ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by overwriting the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChannels + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChannels(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + WRITE_REG(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Add channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by adding them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChAdd + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChAdd(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + SET_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Remove channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by removing them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChRem + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChRem(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + CLEAR_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels order reading into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be retrieved. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_GetSequencerChannels + * @param ADCx ADC instance + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerChannels(ADC_TypeDef *ADCx) +{ + uint32_t ChannelsBitfield = (uint32_t)READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL); + + return ((((ChannelsBitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17) +#if defined(ADC_CCR_VBATEN) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18) +#endif + ); +} + +/** + * @brief Set ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 CONT LL_ADC_REG_SetContinuousMode + * @param ADCx ADC instance + * @param Continuous This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CONT, Continuous); +} + +/** + * @brief Get ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @rmtoll CFGR1 CONT LL_ADC_REG_GetContinuousMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CONT)); +} + +/** + * @brief Set ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 DMAEN LL_ADC_REG_SetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_SetDMATransfer + * @param ADCx ADC instance + * @param DMATransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG, DMATransfer); +} + +/** + * @brief Get ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @rmtoll CFGR1 DMAEN LL_ADC_REG_GetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_GetDMATransfer + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG)); +} + +/** + * @brief Set ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @note Compatibility with devices without feature overrun: + * other devices without this feature have a behavior + * equivalent to data overwritten. + * The default setting of overrun is data preserved. + * Therefore, for compatibility with all devices, parameter + * overrun should be set to data overwritten. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_SetOverrun + * @param ADCx ADC instance + * @param Overrun This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_OVRMOD, Overrun); +} + +/** + * @brief Get ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_GetOverrun + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_OVRMOD)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels + * @{ + */ + +/** + * @brief Set sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMPSEL0 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_SetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTimeY) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->SMPR, + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS), + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS) & (SamplingTimeY & ADC_SAMPLING_TIME_CH_MASK) + ); +} + +/** + * @brief Get sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMPSEL0 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_GetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel) +{ + __IO uint32_t smpr = READ_REG(ADCx->SMPR); + + /* Retrieve sampling time bit corresponding to the selected channel */ + /* and shift it to position 0. */ + uint32_t smp_channel_posbit0 = ((smpr & ADC_SAMPLING_TIME_CH_MASK) + >> ((((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ADC_SMPR_SMPSEL0_BITOFFSET_POS) & + 0x1FUL)); + + /* Select sampling time bitfield depending on sampling time bit value 0 or 1. */ + return ((~(smp_channel_posbit0) * LL_ADC_SAMPLINGTIME_COMMON_1) + | (smp_channel_posbit0 * LL_ADC_SAMPLINGTIME_COMMON_2)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog + * @{ + */ + +/** + * @brief Set ADC analog watchdog monitored channels: + * a single channel, multiple channels or all channels, + * on ADC group regular. + * @note Once monitored channels are selected, analog watchdog + * is enabled. + * @note In case of need to define a single channel to monitor + * with analog watchdog from sequencer channel definition, + * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 AWD1CH LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_SetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_SetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_SetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDChannelGroup This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VBAT_REG + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDChannelGroup) +{ + /* Set bits with content of parameter "AWDChannelGroup" with bits position */ + /* in register and register position depending on parameter "AWDy". */ + /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg; + + if (AWDy == LL_ADC_AWD1) + { + preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, 0UL); + } + else + { + preg = __ADC_PTR_REG_OFFSET(ADCx->AWD2CR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK)) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL)); + } + + MODIFY_REG(*preg, + (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK), + AWDChannelGroup & AWDy); +} + +/** + * @brief Get ADC analog watchdog monitored channel. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Applicable only when the analog watchdog is set to monitor + * one channel. + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 AWD1CH LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_GetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_GetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_GetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On this AWD number, monitored channel can be retrieved + * if only 1 channel is programmed (or none or all channels). + * This function cannot retrieve monitored channel if + * multiple channels are programmed simultaneously + * by bitfield. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK); + + /* If "AnalogWDMonitChannels" == 0, then the selected AWD is disabled */ + /* (parameter value LL_ADC_AWD_DISABLE). */ + /* Else, the selected AWD is enabled and is monitoring a group of channels */ + /* or a single channel. */ + if (AnalogWDMonitChannels != 0UL) + { + if (AWDy == LL_ADC_AWD1) + { + if ((AnalogWDMonitChannels & ADC_CFGR1_AWD1SGL) == 0UL) + { + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = ((AnalogWDMonitChannels + | (ADC_AWD_CR23_CHANNEL_MASK) + ) + & (~(ADC_CFGR1_AWD1CH)) + ); + } + else + { + /* AWD monitoring a single channel */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + | (ADC_AWD2CR_AWD2CH_0 << (AnalogWDMonitChannels >> ADC_CFGR1_AWD1CH_Pos)) + ); + } + } + else + { + if ((AnalogWDMonitChannels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK) + { + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = (ADC_AWD_CR23_CHANNEL_MASK + | (ADC_CFGR1_AWD1EN) + ); + } + else + { + /* AWD monitoring a single channel */ + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + | (ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDMonitChannels) << ADC_CFGR1_AWD1CH_Pos) + ); + } + } + } + + return AnalogWDMonitChannels; +} + +/** + * @brief Set ADC analog watchdog thresholds value of both thresholds + * high and low. + * @note If value of only one threshold high or low must be set, + * use function @ref LL_ADC_SetAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll TR1 HT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 HT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 HT3 LL_ADC_ConfigAnalogWDThresholds\n + * TR1 LT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 LT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 LT3 LL_ADC_ConfigAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdHighValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdHighValue, + uint32_t AWDThresholdLowValue) +{ + /* Set bits with content of parameter "AWDThresholdxxxValue" with bits */ + /* position in register and register position depending on parameter */ + /* "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + MODIFY_REG(*preg, + ADC_TR1_HT1 | ADC_TR1_LT1, + (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); +} + +/** + * @brief Set ADC analog watchdog threshold value of threshold + * high or low. + * @note If values of both thresholds high or low must be set, + * use function @ref LL_ADC_ConfigAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is not conditioned to + * ADC state: + * ADC can be disabled, enabled with or without conversion on going + * on ADC group regular. + * @rmtoll TR1 HT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_SetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_SetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow, + uint32_t AWDThresholdValue) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + MODIFY_REG(*preg, + AWDThresholdsHighLow, + AWDThresholdValue << ((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)); +} + +/** + * @brief Get ADC analog watchdog threshold value of threshold high, + * threshold low or raw data with ADC thresholds high and low + * concatenated. + * @note If raw data with ADC thresholds high and low is retrieved, + * the data of each threshold high or low can be isolated + * using helper macro: + * @ref __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(). + * @rmtoll TR1 HT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_GetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_GetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + return (uint32_t)(READ_BIT(*preg, + (AWDThresholdsHighLow | ADC_TR1_LT1)) + >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) + & ~(AWDThresholdsHighLow & ADC_TR1_LT1))); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_oversampling Configuration of ADC transversal scope: oversampling + * @{ + */ + +/** + * @brief Set ADC oversampling scope. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSE LL_ADC_SetOverSamplingScope + * @param ADCx ADC instance + * @param OvsScope This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingScope(ADC_TypeDef *ADCx, uint32_t OvsScope) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_OVSE, OvsScope); +} + +/** + * @brief Get ADC oversampling scope. + * @rmtoll CFGR2 OVSE LL_ADC_GetOverSamplingScope + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSE)); +} + +/** + * @brief Set ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR2 TOVS LL_ADC_SetOverSamplingDiscont + * @param ADCx ADC instance + * @param OverSamplingDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingDiscont(ADC_TypeDef *ADCx, uint32_t OverSamplingDiscont) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_TOVS, OverSamplingDiscont); +} + +/** + * @brief Get ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @rmtoll CFGR2 TOVS LL_ADC_GetOverSamplingDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TOVS)); +} + +/** + * @brief Set ADC oversampling + * @note This function set the 2 items of oversampling configuration: + * - ratio + * - shift + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSS LL_ADC_ConfigOverSamplingRatioShift\n + * CFGR2 OVSR LL_ADC_ConfigOverSamplingRatioShift + * @param ADCx ADC instance + * @param Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + * @param Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigOverSamplingRatioShift(ADC_TypeDef *ADCx, uint32_t Ratio, uint32_t Shift) +{ + MODIFY_REG(ADCx->CFGR2, (ADC_CFGR2_OVSS | ADC_CFGR2_OVSR), (Shift | Ratio)); +} + +/** + * @brief Get ADC oversampling ratio + * @rmtoll CFGR2 OVSR LL_ADC_GetOverSamplingRatio + * @param ADCx ADC instance + * @retval Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSR)); +} + +/** + * @brief Get ADC oversampling shift + * @rmtoll CFGR2 OVSS LL_ADC_GetOverSamplingShift + * @param ADCx ADC instance + * @retval Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSS)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Enable ADC instance internal voltage regulator. + * @note On this STM32 series, there are three possibilities to enable + * the voltage regulator: + * - by enabling it manually + * using function @ref LL_ADC_EnableInternalRegulator(). + * - by launching a calibration + * using function @ref LL_ADC_StartCalibration(). + * - by enabling the ADC + * using function @ref LL_ADC_Enable(). + * @note On this STM32 series, after ADC internal voltage regulator enable, + * a delay for ADC internal voltage regulator stabilization + * is required before performing a ADC calibration or ADC enable. + * Refer to device datasheet, parameter "tADCVREG_STUP". + * Refer to literal @ref LL_ADC_DELAY_INTERNAL_REGUL_STAB_US. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_EnableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableInternalRegulator(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADVREGEN); +} + +/** + * @brief Disable ADC internal voltage regulator. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_DisableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableInternalRegulator(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR, (ADC_CR_ADVREGEN | ADC_CR_BITS_PROPERTY_RS)); +} + +/** + * @brief Get the selected ADC instance internal voltage regulator state. + * @rmtoll CR ADVREGEN LL_ADC_IsInternalRegulatorEnabled + * @param ADCx ADC instance + * @retval 0: internal regulator is disabled, 1: internal regulator is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsInternalRegulatorEnabled(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADVREGEN) == (ADC_CR_ADVREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the selected ADC instance. + * @note On this STM32 series, after ADC enable, a delay for + * ADC internal analog stabilization is required before performing a + * ADC conversion start. + * Refer to device datasheet, parameter tSTAB. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled and ADC internal voltage regulator enabled. + * @rmtoll CR ADEN LL_ADC_Enable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADEN); +} + +/** + * @brief Disable the selected ADC instance. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be not disabled. Must be enabled without conversion on going + * on group regular. + * @rmtoll CR ADDIS LL_ADC_Disable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADDIS); +} + +/** + * @brief Get the selected ADC instance enable state. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll CR ADEN LL_ADC_IsEnabled + * @param ADCx ADC instance + * @retval 0: ADC is disabled, 1: ADC is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADEN) == (ADC_CR_ADEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the selected ADC instance disable state. + * @rmtoll CR ADDIS LL_ADC_IsDisableOngoing + * @param ADCx ADC instance + * @retval 0: no ADC disable command on going. + */ +__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS)) ? 1UL : 0UL); +} + +/** + * @brief Start ADC calibration in the mode single-ended + * or differential (for devices with differential mode available). + * @note On this STM32 series, a minimum number of ADC clock cycles + * are required between ADC end of calibration and ADC enable. + * Refer to literal @ref LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES. + * @note In case of usage of ADC with DMA transfer: + * On this STM32 series, ADC DMA transfer request should be disabled + * during calibration: + * Calibration factor is available in data register + * and also transferred by DMA. + * To not insert ADC calibration factor among ADC conversion data + * in array variable, DMA transfer must be disabled during + * calibration. + * (DMA transfer setting backup and disable before calibration, + * DMA transfer setting restore after calibration. + * Refer to functions @ref LL_ADC_REG_GetDMATransfer(), + * @ref LL_ADC_REG_SetDMATransfer() ). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADCAL LL_ADC_StartCalibration + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADCAL); +} + +/** + * @brief Get ADC calibration state. + * @rmtoll CR ADCAL LL_ADC_IsCalibrationOnGoing + * @param ADCx ADC instance + * @retval 0: calibration complete, 1: calibration in progress. + */ +__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADCAL) == (ADC_CR_ADCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Start ADC group regular conversion. + * @note On this STM32 series, this function is relevant for both + * internal trigger (SW start) and external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * will start at next trigger event (on the selected trigger edge) + * following the ADC start conversion command. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group regular, + * without conversion stop command on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTART LL_ADC_REG_StartConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTART); +} + +/** + * @brief Stop ADC group regular conversion. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled with conversion on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTP LL_ADC_REG_StopConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StopConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTP); +} + +/** + * @brief Get ADC group regular conversion state. + * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing + * @param ADCx ADC instance + * @retval 0: no conversion is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTART) == (ADC_CR_ADSTART)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular command of conversion stop state + * @rmtoll CR ADSTP LL_ADC_REG_IsStopConversionOngoing + * @param ADCx ADC instance + * @retval 0: no command of conversion stop is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTP) == (ADC_CR_ADSTP)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData32 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData12 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData10 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData8 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData6 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management + * @{ + */ + +/** + * @brief Get flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_IsActiveFlag_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC channel configuration ready. + * @note On this STM32 series, after modifying sequencer + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, performing some actions (configuration update, + * ADC conversion start, ... ) will be ignored. + * Functions requiring wait for CCRDY flag are: + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks() + * @ref LL_ADC_REG_SetSequencerChannels() + * @ref LL_ADC_REG_SetSequencerChAdd() + * @ref LL_ADC_REG_SetSequencerChRem() + * @ref LL_ADC_REG_SetSequencerScanDirection() + * @ref LL_ADC_REG_SetSequencerConfigurable() + * @note Duration of ADC channel configuration ready: CCRDY handshake + * requires 1APB + 2 ADC + 3 APB cycles after the channel configuration + * has been changed. + * @rmtoll ISR CCRDY LL_ADC_IsActiveFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_IsActiveFlag_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, ADC_ISR_EOC) == (ADC_ISR_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_IsActiveFlag_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_IsActiveFlag_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_IsActiveFlag_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 1 flag + * @rmtoll ISR AWD1 LL_ADC_IsActiveFlag_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_IsActiveFlag_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD2(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD2) == (LL_ADC_FLAG_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_IsActiveFlag_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD3) == (LL_ADC_FLAG_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_IsActiveFlag_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOCAL) == (LL_ADC_FLAG_EOCAL)) ? 1UL : 0UL); +} + +/** + * @brief Clear flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_ClearFlag_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_ADRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_ADRDY); +} + +/** + * @brief Clear flag ADC channel configuration ready. + * @rmtoll ISR CCRDY LL_ADC_ClearFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_ClearFlag_CCRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Clear flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_ClearFlag_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOC(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOC); +} + +/** + * @brief Clear flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_ClearFlag_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOS); +} + +/** + * @brief Clear flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_ClearFlag_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_OVR); +} + +/** + * @brief Clear flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_ClearFlag_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOSMP(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOSMP); +} + +/** + * @brief Clear flag ADC analog watchdog 1. + * @rmtoll ISR AWD1 LL_ADC_ClearFlag_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD1); +} + +/** + * @brief Clear flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_ClearFlag_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD2(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD2); +} + +/** + * @brief Clear flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_ClearFlag_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD3(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD3); +} + +/** + * @brief Clear flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_ClearFlag_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOCAL(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOCAL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_IT_Management ADC IT management + * @{ + */ + +/** + * @brief Enable ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_ADRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Enable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_EnableIT_CCRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Enable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_EnableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOC(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Enable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_EnableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Enable ADC group regular interruption overrun. + * @rmtoll IER OVRIE LL_ADC_EnableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Enable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_EnableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOSMP(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Enable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Enable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_EnableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD2(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Enable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_EnableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD3(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Enable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_EnableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOCAL(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Disable interruption ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_ADRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Disable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_DisableIT_CCRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Disable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_DisableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOC(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Disable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_DisableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Disable interruption ADC group regular overrun. + * @rmtoll IER OVRIE LL_ADC_DisableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Disable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_DisableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOSMP(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Disable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_DisableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Disable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_DisableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD2(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Disable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_DisableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD3(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Disable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_DisableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOCAL(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Get state of interruption ADC ready + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of unitary conversion + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCIE LL_ADC_IsEnabledIT_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOC) == (LL_ADC_IT_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sequence conversions + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSIE LL_ADC_IsEnabledIT_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular overrun + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER OVRIE LL_ADC_IsEnabledIT_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sampling + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSMPIE LL_ADC_IsEnabledIT_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC analog watchdog 1 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD1IE LL_ADC_IsEnabledIT_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 2 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD2IE LL_ADC_IsEnabledIT_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD2(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD2) == (LL_ADC_IT_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 3 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD3IE LL_ADC_IsEnabledIT_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD3) == (LL_ADC_IT_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC end of calibration + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCALIE LL_ADC_IsEnabledIT_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOCAL) == (LL_ADC_IT_EOCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +/* Initialization of some features of ADC common parameters and multimode */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON); +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); + +/* De-initialization of ADC instance */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx); + +/* Initialization of some features of ADC instance */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct); +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct); + +/* Initialization of some features of ADC instance and ADC group regular */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_bus.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_bus.h new file mode 100644 index 0000000..213f28b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_bus.h @@ -0,0 +1,1313 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_BUS_H +#define STM32G0xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN +#if defined(DMA2) +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN +#endif /* DMA2 */ +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLASHEN +#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBSMENR_SRAMSMEN +#if defined(CRC) +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN +#endif /* CRC */ +#if defined(AES) +#define LL_AHB1_GRP1_PERIPH_CRYP RCC_AHBENR_AESEN +#endif /* AES */ +#if defined(RNG) +#define LL_AHB1_GRP1_PERIPH_RNG RCC_AHBENR_RNGEN +#endif /* RNG */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#if defined(TIM2) +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APBENR1_TIM2EN +#endif /* TIM2 */ +#if defined(TIM3) +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APBENR1_TIM3EN +#endif /* TIM3 */ +#if defined(TIM4) +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APBENR1_TIM4EN +#endif /* TIM4 */ +#if defined(TIM6) +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APBENR1_TIM6EN +#endif /* TIM6 */ +#if defined(TIM7) +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APBENR1_TIM7EN +#endif /* TIM7 */ +#if defined(LPUART2) +#define LL_APB1_GRP1_PERIPH_LPUART2 RCC_APBENR1_LPUART2EN +#endif /* LPUART2 */ +#if defined(USART5) +#define LL_APB1_GRP1_PERIPH_USART5 RCC_APBENR1_USART5EN +#endif /* USART5 */ +#if defined(USART6) +#define LL_APB1_GRP1_PERIPH_USART6 RCC_APBENR1_USART6EN +#endif /* USART6 */ +#define LL_APB1_GRP1_PERIPH_RTC RCC_APBENR1_RTCAPBEN +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APBENR1_WWDGEN +#if defined(FDCAN1) || defined(FDCAN2) +#define LL_APB1_GRP1_PERIPH_FDCAN RCC_APBENR1_FDCANEN +#endif /* FDCAN1 */ +#if defined(USB_DRD_FS) +#define LL_APB1_GRP1_PERIPH_USB RCC_APBENR1_USBEN +#endif /* USB_DRD_FS */ +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APBENR1_SPI2EN +#if defined(SPI3) +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APBENR1_SPI3EN +#endif /* SPI3 */ +#if defined(CRS) +#define LL_APB1_GRP1_PERIPH_CRS RCC_APBENR1_CRSEN +#endif /* CRS */ +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APBENR1_USART2EN +#if defined(USART3) +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APBENR1_USART3EN +#endif /* USART3 */ +#if defined(USART4) +#define LL_APB1_GRP1_PERIPH_USART4 RCC_APBENR1_USART4EN +#endif /* USART4 */ +#if defined(LPUART1) +#define LL_APB1_GRP1_PERIPH_LPUART1 RCC_APBENR1_LPUART1EN +#endif /* LPUART1 */ +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APBENR1_I2C1EN +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APBENR1_I2C2EN +#if defined(I2C3) +#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APBENR1_I2C3EN +#endif /* I2C3 */ +#if defined(CEC) +#define LL_APB1_GRP1_PERIPH_CEC RCC_APBENR1_CECEN +#endif /* CEC */ +#if defined(UCPD1) +#define LL_APB1_GRP1_PERIPH_UCPD1 RCC_APBENR1_UCPD1EN +#endif /* UCPD1 */ +#if defined(UCPD2) +#define LL_APB1_GRP1_PERIPH_UCPD2 RCC_APBENR1_UCPD2EN +#endif /* UCPD2 */ +#define LL_APB1_GRP1_PERIPH_DBGMCU RCC_APBENR1_DBGEN +#define LL_APB1_GRP1_PERIPH_PWR RCC_APBENR1_PWREN +#if defined(DAC1) +#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APBENR1_DAC1EN +#endif /* DAC1 */ +#if defined(LPTIM2) +#define LL_APB1_GRP1_PERIPH_LPTIM2 RCC_APBENR1_LPTIM2EN +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APBENR1_LPTIM1EN +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APBENR2_SYSCFGEN +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APBENR2_TIM1EN +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APBENR2_SPI1EN +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APBENR2_USART1EN +#if defined(TIM14) +#define LL_APB2_GRP1_PERIPH_TIM14 RCC_APBENR2_TIM14EN +#endif /* TIM14 */ +#if defined(TIM15) +#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APBENR2_TIM15EN +#endif /* TIM15 */ +#if defined(TIM16) +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APBENR2_TIM16EN +#endif /* TIM16 */ +#if defined(TIM17) +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APBENR2_TIM17EN +#endif /* TIM17 */ +#if defined(ADC) +#define LL_APB2_GRP1_PERIPH_ADC RCC_APBENR2_ADCEN +#endif /* ADC */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_IOP_GRP1_PERIPH IOP GRP1 PERIPH + * @{ + */ +#define LL_IOP_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_IOP_GRP1_PERIPH_GPIOA RCC_IOPENR_GPIOAEN +#define LL_IOP_GRP1_PERIPH_GPIOB RCC_IOPENR_GPIOBEN +#define LL_IOP_GRP1_PERIPH_GPIOC RCC_IOPENR_GPIOCEN +#define LL_IOP_GRP1_PERIPH_GPIOD RCC_IOPENR_GPIODEN +#if defined(GPIOE) +#define LL_IOP_GRP1_PERIPH_GPIOE RCC_IOPENR_GPIOEEN +#endif /* GPIOE */ +#if defined(GPIOF) +#define LL_IOP_GRP1_PERIPH_GPIOF RCC_IOPENR_GPIOFEN +#endif /* GPIOF */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_EnableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR AESEN LL_AHB1_GRP1_EnableClock\n + * AHBENR RNGEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR AESEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR RNGEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHBENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_DisableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR AESEN LL_AHB1_GRP1_DisableClock\n + * AHBENR RNGEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHBRSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR FLASHRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR AESRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR RNGRST LL_AHB1_GRP1_ForceReset +* @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHBRSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR AESRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR RNGRST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHBSMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR SRAMSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR AESSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR RNGSMEN LL_AHB1_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBSMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBSMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHBSMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR SRAMSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR AESSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR RNGSMEN LL_AHB1_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBSMENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APBENR1 TIM2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM4EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM6EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM7EN LL_APB1_GRP1_EnableClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_EnableClock\n + * APBENR1 SPI2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 SPI3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART4EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART5EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART6EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPUART1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPUART2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 I2C2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 I2C3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 CECEN LL_APB1_GRP1_EnableClock\n + * APBENR1 UCPD1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 UCPD2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USBEN LL_APB1_GRP1_EnableClock\n + * APBENR1 FDCANEN LL_APB1_GRP1_EnableClock\n + * APBENR1 DBGEN LL_APB1_GRP1_EnableClock\n + * APBENR1 PWREN LL_APB1_GRP1_EnableClock\n + * APBENR1 DAC1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPTIM2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPTIM1EN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APBENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART4EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART5EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART6EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPUART1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPUART2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 CECEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 UCPD1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 UCPD2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USBEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 FDCANEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 DBGEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 DAC1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPTIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APBENR1, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APBENR1 TIM2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM4EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM6EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM7EN LL_APB1_GRP1_DisableClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_DisableClock\n + * APBENR1 SPI2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 SPI3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART4EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART5EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART6EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPUART1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPUART2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 I2C2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 I2C3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 CECEN LL_APB1_GRP1_DisableClock\n + * APBENR1 UCPD1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 UCPD2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USBEN LL_APB1_GRP1_DisableClock\n + * APBENR1 FDCANEN LL_APB1_GRP1_DisableClock\n + * APBENR1 DBGEN LL_APB1_GRP1_DisableClock\n + * APBENR1 PWREN LL_APB1_GRP1_DisableClock\n + * APBENR1 DAC1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPTIM2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPTIM1EN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBENR1, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APBRSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 RTCRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 WWDGRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART4RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART5RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART6RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPUART1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPUART2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 CECRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 UCPD1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 UCPD2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USBRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 FDCANRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 DBGRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 PWRRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 DAC1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPTIM2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APBRSTR1, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APBRSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 RTCRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 WWDGRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART4RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART5RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART6RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPUART1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPUART2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 CECRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 UCPD1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 UCPD2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USBRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 FDCANRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 DBGRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 DAC1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPTIM2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBRSTR1, Periphs); +} + +/** + * @brief Enable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART6SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPUART1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPUART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 CECSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 UCPD1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 UCPD2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USBSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 FDCANSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 DBGSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 DAC1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPTIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBSMENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBSMENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM'SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART6SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPUART1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPUART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 CECSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 UCPD1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 UCPD2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USBSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 FSCANSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 DBGSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 DAC1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPTIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBSMENR1, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 USART1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM15EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_EnableClock\n + * APBENR2 ADCEN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM15EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 ADCEN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APBENR2, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 USART1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM15EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_DisableClock\n + * APBENR2 ADCEN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBENR2, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APBRSTR2 SYSCFGRST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 SPI1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 USART1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM14RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM15RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM16RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM17RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 ADCRST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APBRSTR2, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APBRSTR2 SYSCFGRST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 USART1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM14RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM15RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 ADCRST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBRSTR2, Periphs); +} + +/** + * @brief Enable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR2 SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM14SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 ADCSMEN LL_APB2_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBSMENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBSMENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR2 SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM14SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 ADCSMEN LL_APB2_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBSMENR2, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_IOP IOP + * @{ + */ + +/** + * @brief Enable IOP peripherals clock. + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIODEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOEEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->IOPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->IOPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if IOP peripheral clock is enabled or not + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIODEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOEEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IOP_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->IOPENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable IOP peripherals clock. + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIODEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOEEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPENR, Periphs); +} + +/** + * @brief Disable IOP peripherals clock. + * @rmtoll IOPRSTR GPIOARST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOBRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOCRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIODRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOERST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOFRST LL_IOP_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_ALL + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->IOPRSTR, Periphs); +} + +/** + * @brief Release IOP peripherals reset. + * @rmtoll IOPRSTR GPIOARST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOBRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOCRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIODRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOERST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOFRST LL_IOP_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_ALL + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPRSTR, Periphs); +} + +/** + * @brief Enable IOP peripheral clocks in Sleep and Stop modes + * @rmtoll IOPSMENR GPIOASMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOBSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOCSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIODSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOESMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOFSMEN LL_IOP_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->IOPSMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->IOPSMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable IOP peripheral clocks in Sleep and Stop modes + * @rmtoll IOPSMENR GPIOASMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOBSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOCSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIODSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOESMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOFSMEN LL_IOP_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPSMENR, Periphs); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_BUS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_comp.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_comp.h new file mode 100644 index 0000000..1f5d132 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_comp.h @@ -0,0 +1,971 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_comp.h + * @author MCD Application Team + * @brief Header file of COMP LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_COMP_H +#define STM32G0xx_LL_COMP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (COMP1) || defined (COMP2) + +/** @defgroup COMP_LL COMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup COMP_LL_Private_Constants COMP Private Constants + * @{ + */ + +/* Internal mask for pair of comparators instances window mode: */ +/* To select into literals LL_COMP_WINDOWMODE_COMPx_INPUT_PLUS_COMMON */ +/* the relevant bits for: */ +/* (concatenation of multiple bits used in different registers) */ +/* - Comparator instance selected as master for window mode : register offset */ +/* - Window mode enable or disable: bit value */ +#define LL_COMP_WINDOWMODE_COMP_ODD_REGOFFSET_MASK (0x00000000UL) /* Register of COMP instance odd (COMP1_CSR, ...) defined as reference register */ +#define LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK (0x00000001UL) /* Register of COMP instance even (COMP2_CSR, ...) offset vs register of COMP instance odd */ +#define LL_COMP_WINDOWMODE_COMPX_REGOFFSET_MASK (LL_COMP_WINDOWMODE_COMP_ODD_REGOFFSET_MASK | LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK) +#define LL_COMP_WINDOWMODE_COMPX_SETTING_MASK (COMP_CSR_WINMODE) +#define LL_COMP_WINDOWOUTPUT_COMPX_SETTING_MASK (COMP_CSR_WINOUT) +#define LL_COMP_WINDOWOUTPUT_BOTH_SETTING_MASK (COMP_CSR_WINOUT << 1UL) +#define LL_COMP_WINDOWOUTPUT_BOTH_POS_VS_WINDOW (1UL) + +/* COMP registers bits positions */ +#define LL_COMP_WINDOWMODE_BITOFFSET_POS (11UL) /* Value equivalent to POSITION_VAL(COMP_CSR_WINMODE) */ +#define LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS (30UL) /* Value equivalent to POSITION_VAL(COMP_CSR_VALUE) */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup COMP_LL_Private_Macros COMP Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __COMP_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup COMP_LL_ES_INIT COMP Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of COMP instance. + */ +typedef struct +{ + uint32_t PowerMode; /*!< Set comparator operating mode to adjust power and speed. + This parameter can be a value of @ref COMP_LL_EC_POWERMODE + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetPowerMode(). */ + + uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input). + This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputPlus(). */ + + uint32_t InputMinus; /*!< Set comparator input minus (inverting input). + This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputMinus(). */ + + uint32_t InputHysteresis; /*!< Set comparator hysteresis mode of the input minus. + This parameter can be a value of @ref COMP_LL_EC_INPUT_HYSTERESIS + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputHysteresis(). */ + + uint32_t OutputPolarity; /*!< Set comparator output polarity. + This parameter can be a value of @ref COMP_LL_EC_OUTPUT_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputPolarity(). */ + + uint32_t OutputBlankingSource; /*!< Set comparator blanking source. + This parameter can be a value of @ref COMP_LL_EC_OUTPUT_BLANKING_SOURCE + + This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputBlankingSource(). */ + +} LL_COMP_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_LL_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_LL_EC_COMMON_WINDOWMODE Comparator common modes - Window mode + * @{ + */ +#define LL_COMP_WINDOWMODE_DISABLE (0x00000000UL) /*!< Window mode disable: Comparators 1 and 2 are independent */ +#define LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE | LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */ +#define LL_COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON (COMP_CSR_WINMODE | LL_COMP_WINDOWMODE_COMP_ODD_REGOFFSET_MASK) /*!< Window mode enable: if used from COMP1 or COMP2 instance, comparators instances pair COMP1 and COMP2 have their input plus connected together, the common input is COMP2 input plus (COMP1 input plus is no more accessible). If used from COMP3 instance (when available), comparators instances pair COMP2 and COMP3 have their input plus connected together, the common input is COMP2 input plus (COMP3 input plus is no more accessible). */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_COMMON_WINDOWOUTPUT Comparator common modes - Window output + * @{ + */ +#define LL_COMP_WINDOWOUTPUT_EACH_COMP (0x00000000UL) /*!< Window output default mode: Comparators output are indicating each their own state. To know window mode state: each comparator output must be read, if "((COMPx exclusive or COMPy) == 1)" then monitored signal is within comparators window. The same way, if both comparators output are high, then monitored signal is below window. */ +#define LL_COMP_WINDOWOUTPUT_COMP1 (COMP_CSR_WINOUT | LL_COMP_WINDOWMODE_COMP_ODD_REGOFFSET_MASK) /*!< Window output synthetized on COMP1 output: COMP1 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */ +#define LL_COMP_WINDOWOUTPUT_COMP2 (COMP_CSR_WINOUT | LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK) /*!< Window output synthetized on COMP2 output: COMP2 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */ +#if defined(COMP3) +#define LL_COMP_WINDOWOUTPUT_COMP3 (COMP_CSR_WINOUT | LL_COMP_WINDOWMODE_COMP_ODD_REGOFFSET_MASK) /*!< Window output synthetized on COMP3 output: COMP3 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). Available only on devices featuring COMP3 instance. */ +#endif +#define LL_COMP_WINDOWOUTPUT_BOTH (COMP_CSR_WINOUT | LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK | LL_COMP_WINDOWOUTPUT_BOTH_SETTING_MASK) /*!< Window output synthetized on both comparators output of pair of comparator selected (COMP1 and COMP2, or COMP2 and COMP3 for devices featuring COMP3 instance): both comparators outputs are no more indicating their own state, but global window mode state (logical high means monitored signal is within comparators window). This is a specific configuration (technically possible but not relevant from application point of view: 2 comparators output used for the same signal level), standard configuration for window mode is one of the settings above. */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode + * @{ + */ +#define LL_COMP_POWERMODE_HIGHSPEED (0x00000000UL) /*!< COMP power mode to high speed */ +#define LL_COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< COMP power mode to medium speed */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection + * @{ + */ +#define LL_COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1, pin PB4 for COMP2, pin PB0 for COMP3 (for devices featuring COMP3 instance)) */ +#define LL_COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2, pin PC1 for COMP3 (for devices featuring COMP3 instance)) */ +#define LL_COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2, pin PE7 for COMP3 (for devices featuring COMP3 instance)) */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_MINUS Comparator inputs - Input minus (input inverting) selection + * @{ + */ +#define LL_COMP_INPUT_MINUS_1_4VREFINT (0x00000000UL) /*!< Comparator input minus connected to 1/4 VrefInt */ +#define LL_COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to 1/2 VrefInt */ +#define LL_COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to 3/4 VrefInt */ +#define LL_COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to VrefInt */ +#define LL_COMP_INPUT_MINUS_DAC1_CH1 ( COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) */ +#define LL_COMP_INPUT_MINUS_DAC1_CH2 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */ +#define LL_COMP_INPUT_MINUS_IO1 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2, pin PB2 for COMP3 (for devices featuring COMP3 instance)) */ +#define LL_COMP_INPUT_MINUS_IO2 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1, pin PB7 for COMP2, pin PC0 for COMP3 (for devices featuring COMP3 instance)) */ +#define LL_COMP_INPUT_MINUS_IO3 (COMP_CSR_INMSEL_3 ) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2, pin PE8 for COMP3 (for devices featuring COMP3 instance)) */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_HYSTERESIS Comparator input - Hysteresis + * @{ + */ +#define LL_COMP_HYSTERESIS_NONE (0x00000000UL) /*!< No hysteresis */ +#define LL_COMP_HYSTERESIS_LOW ( COMP_CSR_HYST_0) /*!< Hysteresis level low */ +#define LL_COMP_HYSTERESIS_MEDIUM (COMP_CSR_HYST_1 ) /*!< Hysteresis level medium */ +#define LL_COMP_HYSTERESIS_HIGH (COMP_CSR_HYST_1 | COMP_CSR_HYST_0) /*!< Hysteresis level high */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_OUTPUT_POLARITY Comparator output - Output polarity + * @{ + */ +#define LL_COMP_OUTPUTPOL_NONINVERTED (0x00000000UL) /*!< COMP output polarity is not inverted: comparator output is high when the plus (non-inverting) input is at a higher voltage than the minus (inverting) input */ +#define LL_COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output polarity is inverted: comparator output is low when the plus (non-inverting) input is at a lower voltage than the minus (inverting) input */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_OUTPUT_BLANKING_SOURCE Comparator output - Blanking source + * @{ + */ +#define LL_COMP_BLANKINGSRC_NONE (0x00000000UL) /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in COMP register + * @param __INSTANCE__ comparator instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_COMP_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** @defgroup COMP_LL_EM_HELPER_MACRO COMP helper macro + * @{ + */ + +/** + * @brief Helper macro to select the COMP common instance + * to which is belonging the selected COMP instance. + * @note COMP common register instance can be used to + * set parameters common to several COMP instances. + * Refer to functions having argument "COMPxy_COMMON" as parameter. + * @param __COMPx__ COMP instance + * @retval COMP common instance or value "0" if there is no COMP common instance. + */ +#if defined(COMP3) +#define __LL_COMP_COMMON_INSTANCE(__COMPx__) \ + ((((__COMPx__) == COMP3)) \ + ? ( \ + (COMP23_COMMON) \ + ) \ + : \ + ( \ + (COMP12_COMMON) \ + ) \ + ) +#else +#define __LL_COMP_COMMON_INSTANCE(__COMPx__) \ + (COMP12_COMMON) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup COMP_LL_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope: common to several COMP instances + * @{ + */ + +/** + * @brief Set window mode of a pair of comparators instances + * (2 consecutive COMP instances COMP and COMP). + * @rmtoll CSR WINMODE LL_COMP_SetCommonWindowMode + * @param COMPxy_COMMON Comparator common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) + * @param WindowMode This parameter can be one of the following values: + * @arg @ref LL_COMP_WINDOWMODE_DISABLE + * @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (1) + * @arg @ref LL_COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON (1)(2) + * + * (1) Parameter available on all STM32G0 devices, must be used with comparator common instance COMP12_COMMON + * (2) Parameter specificity on devices STM32G0B1xx and STM32G0C1xx: only parameter that can be used only with comparator common instance COMP23_COMMON + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowMode) +{ + uint32_t window_mode_tmp = WindowMode; + + /* Note: On this STM32 series, window mode can be set from any instance */ + /* of the pair of comparator instances. */ +#if defined(COMP3) + /* Note: Exception for STM32G0 devices featuring ADC3 instance: in common */ + /* group of COMP2 and COMP3, instances odd and even are inverted. */ + /* Perform switch of parameter selected. */ + if(COMPxy_COMMON == COMP23_COMMON) + { + if(WindowMode == LL_COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) + { + window_mode_tmp = LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON; + } + } +#endif + + __IO uint32_t *preg = __COMP_PTR_REG_OFFSET(COMPxy_COMMON->CSR_ODD, (window_mode_tmp & LL_COMP_WINDOWMODE_COMPX_REGOFFSET_MASK)); + + /* Clear the potential previous setting of window mode */ + __IO uint32_t *preg_clear = __COMP_PTR_REG_OFFSET(COMPxy_COMMON->CSR_ODD, (~(window_mode_tmp & LL_COMP_WINDOWMODE_COMPX_REGOFFSET_MASK) & 0x1UL)); + CLEAR_BIT(*preg_clear, + COMP_CSR_WINMODE + ); + + /* Set window mode */ + MODIFY_REG(*preg, + COMP_CSR_WINMODE, + (window_mode_tmp & LL_COMP_WINDOWMODE_COMPX_SETTING_MASK) + ); +} + +/** + * @brief Get window mode of a pair of comparators instances + * (2 consecutive COMP instances COMP and COMP). + * @rmtoll CSR WINMODE LL_COMP_GetCommonWindowMode + * @param COMPxy_COMMON Comparator common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_WINDOWMODE_DISABLE + * @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (1) + * @arg @ref LL_COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON (1)(2) + * + * (1) Parameter available on all STM32G0 devices, must be used with comparator common instance COMP12_COMMON + * (2) Parameter specificity on devices STM32G0B1xx and STM32G0C1xx: only parameter that can be used only with comparator common instance COMP23_COMMON + */ +__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON) +{ + /* Note: On this STM32 series, window mode can be set from any instance */ + /* of the pair of comparator instances. */ +#if defined(COMP3) + uint32_t window_mode_comp_odd; + uint32_t window_mode_comp_even; + + /* Note: Exception for STM32G0 devices featuring ADC3 instance: in common */ + /* group of COMP2 and COMP3, instances odd and even are inverted. */ + /* Perform switch of parameter selected. */ + if(COMPxy_COMMON == COMP23_COMMON) + { + window_mode_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + window_mode_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINMODE); + } + else + { + window_mode_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINMODE); + window_mode_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + } +#else + const uint32_t window_mode_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINMODE); + const uint32_t window_mode_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINMODE); +#endif + + return (uint32_t)(window_mode_comp_odd + | window_mode_comp_even + | ((window_mode_comp_even >> LL_COMP_WINDOWMODE_BITOFFSET_POS) * LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK)); +} + +/** + * @brief Set window output of a pair of comparators instances + * (2 consecutive COMP instances COMP and COMP). + * @rmtoll CSR WINOUT LL_COMP_SetCommonWindowOutput + * @param COMPxy_COMMON Comparator common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) + * @param WindowOutput This parameter can be one of the following values: + * @arg @ref LL_COMP_WINDOWOUTPUT_EACH_COMP + * @arg @ref LL_COMP_WINDOWOUTPUT_COMP1 (1) + * @arg @ref LL_COMP_WINDOWOUTPUT_COMP2 (1) + * @arg @ref LL_COMP_WINDOWOUTPUT_COMP3 (2) + * @arg @ref LL_COMP_WINDOWOUTPUT_BOTH + * + * (1) Parameter available on all STM32G0 devices, must be used with comparator common instance COMP12_COMMON + * (2) Parameter available only on devices STM32G0B1xx and STM32G0C1xx, must be used with comparator common instance COMP23_COMMON + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetCommonWindowOutput(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowOutput) +{ + uint32_t window_output_tmp = WindowOutput; + +#if defined(COMP3) + /* Note: Exception for STM32G0 devices featuring ADC3 instance: in common */ + /* group of COMP2 and COMP3, instances odd and even are inverted. */ + /* Perform switch of parameter selected. */ + if(COMPxy_COMMON == COMP23_COMMON) + { + if(WindowOutput == LL_COMP_WINDOWOUTPUT_COMP2) + { + window_output_tmp = LL_COMP_WINDOWOUTPUT_COMP3; + } + else if(WindowOutput == LL_COMP_WINDOWOUTPUT_COMP3) + { + window_output_tmp = LL_COMP_WINDOWOUTPUT_COMP2; + } + else + { + /* No modification of other parameters */ + } + } +#endif + + __IO uint32_t *preg = __COMP_PTR_REG_OFFSET(COMPxy_COMMON->CSR_ODD, (window_output_tmp & LL_COMP_WINDOWMODE_COMPX_REGOFFSET_MASK)); + + /* Clear the potential previous setting of window output on the relevant comparator instance */ + /* (clear bit of window output unless specific case of setting of comparator both output selected) */ + __IO uint32_t *preg_clear = __COMP_PTR_REG_OFFSET(COMPxy_COMMON->CSR_ODD, (~(window_output_tmp & LL_COMP_WINDOWMODE_COMPX_REGOFFSET_MASK) & 0x1UL)); + MODIFY_REG(*preg_clear, + COMP_CSR_WINOUT, + ((window_output_tmp & LL_COMP_WINDOWOUTPUT_BOTH_SETTING_MASK) >> LL_COMP_WINDOWOUTPUT_BOTH_POS_VS_WINDOW) + ); + + /* Set window output */ + MODIFY_REG(*preg, + COMP_CSR_WINOUT, + (window_output_tmp & LL_COMP_WINDOWOUTPUT_COMPX_SETTING_MASK) + ); +} + +/** + * @brief Get window output of a pair of comparators instances + * (2 consecutive COMP instances COMP and COMP). + * @rmtoll CSR WINMODE LL_COMP_GetCommonWindowOutput + * @param COMPxy_COMMON Comparator common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_WINDOWOUTPUT_EACH_COMP + * @arg @ref LL_COMP_WINDOWOUTPUT_COMP1 (1) + * @arg @ref LL_COMP_WINDOWOUTPUT_COMP2 (1) + * @arg @ref LL_COMP_WINDOWOUTPUT_COMP3 (2) + * @arg @ref LL_COMP_WINDOWOUTPUT_BOTH + * + * (1) Parameter available on all STM32G0 devices, must be used with comparator common instance COMP12_COMMON + * (2) Parameter available only on devices STM32G0B1xx and STM32G0C1xx, must be used with comparator common instance COMP23_COMMON + */ +__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowOutput(COMP_Common_TypeDef *COMPxy_COMMON) +{ +#if defined(COMP3) + uint32_t window_output_comp_odd; + uint32_t window_output_comp_even; + + /* Note: Exception for STM32G0 devices featuring ADC3 instance: in common */ + /* group of COMP2 and COMP3, instances odd and even are inverted. */ + /* Perform switch of parameter selected. */ + if(COMPxy_COMMON == COMP23_COMMON) + { + window_output_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINOUT); + window_output_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINOUT); + } + else + { + window_output_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINOUT); + window_output_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINOUT); + } +#else + const uint32_t window_output_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINOUT); + const uint32_t window_output_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINOUT); +#endif + + /* Construct value corresponding to LL_COMP_WINDOWOUTPUT_xxx */ + return (uint32_t)(window_output_comp_odd + | window_output_comp_even + | ((window_output_comp_even >> COMP_CSR_WINOUT_Pos) * LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK) + | (window_output_comp_odd + window_output_comp_even)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_modes Configuration of comparator modes + * @{ + */ + +/** + * @brief Set comparator instance operating mode to adjust power and speed. + * @rmtoll CSR PWRMODE LL_COMP_SetPowerMode + * @param COMPx Comparator instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_COMP_POWERMODE_HIGHSPEED + * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetPowerMode(COMP_TypeDef *COMPx, uint32_t PowerMode) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_PWRMODE, PowerMode); +} + +/** + * @brief Get comparator instance operating mode to adjust power and speed. + * @rmtoll CSR PWRMODE LL_COMP_GetPowerMode + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_POWERMODE_HIGHSPEED + * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED + */ +__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_PWRMODE)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_inputs Configuration of comparator inputs + * @{ + */ + +/** + * @brief Set comparator inputs minus (inverting) and plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @note On this STM32 series, a voltage scaler is used + * when COMP input is based on VrefInt (VrefInt or subdivision + * of VrefInt): + * Voltage scaler requires a delay for voltage stabilization. + * Refer to device datasheet, parameter "tSTART_SCALER". + * @rmtoll CSR INMSEL LL_COMP_ConfigInputs\n + * CSR INPSEL LL_COMP_ConfigInputs\n + * @param COMPx Comparator instance + * @param InputMinus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 + * @arg @ref LL_COMP_INPUT_MINUS_IO1 + * @arg @ref LL_COMP_INPUT_MINUS_IO2 + * @arg @ref LL_COMP_INPUT_MINUS_IO3 + * @param InputPlus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_IO1 + * @arg @ref LL_COMP_INPUT_PLUS_IO2 + * @arg @ref LL_COMP_INPUT_PLUS_IO3 + * @retval None + */ +__STATIC_INLINE void LL_COMP_ConfigInputs(COMP_TypeDef *COMPx, uint32_t InputMinus, uint32_t InputPlus) +{ + MODIFY_REG(COMPx->CSR, + COMP_CSR_INMSEL | COMP_CSR_INPSEL, + InputMinus | InputPlus); +} + +/** + * @brief Set comparator input plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR INPSEL LL_COMP_SetInputPlus + * @param COMPx Comparator instance + * @param InputPlus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_IO1 + * @arg @ref LL_COMP_INPUT_PLUS_IO2 + * @arg @ref LL_COMP_INPUT_PLUS_IO3 + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputPlus(COMP_TypeDef *COMPx, uint32_t InputPlus) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_INPSEL, InputPlus); +} + +/** + * @brief Get comparator input plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR INPSEL LL_COMP_GetInputPlus + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_IO1 + * @arg @ref LL_COMP_INPUT_PLUS_IO2 + * @arg @ref LL_COMP_INPUT_PLUS_IO3 + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INPSEL)); +} + +/** + * @brief Set comparator input minus (inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @note On this STM32 series, a voltage scaler is used + * when COMP input is based on VrefInt (VrefInt or subdivision + * of VrefInt): + * Voltage scaler requires a delay for voltage stabilization. + * Refer to device datasheet, parameter "tSTART_SCALER". + * @rmtoll CSR INMSEL LL_COMP_SetInputMinus + * @param COMPx Comparator instance + * @param InputMinus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 + * @arg @ref LL_COMP_INPUT_MINUS_IO1 + * @arg @ref LL_COMP_INPUT_MINUS_IO2 + * @arg @ref LL_COMP_INPUT_MINUS_IO3 + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputMinus(COMP_TypeDef *COMPx, uint32_t InputMinus) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_INMSEL, InputMinus); +} + +/** + * @brief Get comparator input minus (inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR INMSEL LL_COMP_GetInputMinus + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 + * @arg @ref LL_COMP_INPUT_MINUS_IO1 + * @arg @ref LL_COMP_INPUT_MINUS_IO2 + * @arg @ref LL_COMP_INPUT_MINUS_IO3 + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INMSEL)); +} + +/** + * @brief Set comparator instance hysteresis mode of the input minus (inverting input). + * @rmtoll CSR HYST LL_COMP_SetInputHysteresis + * @param COMPx Comparator instance + * @param InputHysteresis This parameter can be one of the following values: + * @arg @ref LL_COMP_HYSTERESIS_NONE + * @arg @ref LL_COMP_HYSTERESIS_LOW + * @arg @ref LL_COMP_HYSTERESIS_MEDIUM + * @arg @ref LL_COMP_HYSTERESIS_HIGH + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputHysteresis(COMP_TypeDef *COMPx, uint32_t InputHysteresis) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_HYST, InputHysteresis); +} + +/** + * @brief Get comparator instance hysteresis mode of the minus (inverting) input. + * @rmtoll CSR HYST LL_COMP_GetInputHysteresis + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_HYSTERESIS_NONE + * @arg @ref LL_COMP_HYSTERESIS_LOW + * @arg @ref LL_COMP_HYSTERESIS_MEDIUM + * @arg @ref LL_COMP_HYSTERESIS_HIGH + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_HYST)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_output Configuration of comparator output + * @{ + */ + +/** + * @brief Set comparator instance output polarity. + * @rmtoll CSR POLARITY LL_COMP_SetOutputPolarity + * @param COMPx Comparator instance + * @param OutputPolarity This parameter can be one of the following values: + * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED + * @arg @ref LL_COMP_OUTPUTPOL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetOutputPolarity(COMP_TypeDef *COMPx, uint32_t OutputPolarity) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_POLARITY, OutputPolarity); +} + +/** + * @brief Get comparator instance output polarity. + * @rmtoll CSR POLARITY LL_COMP_GetOutputPolarity + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED + * @arg @ref LL_COMP_OUTPUTPOL_INVERTED + */ +__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_POLARITY)); +} + +/** + * @brief Set comparator instance blanking source. + * @note Blanking source may be specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @note Availability of parameters of blanking source from timer + * depends on timers availability on the selected device. + * @rmtoll CSR BLANKING LL_COMP_SetOutputBlankingSource + * @param COMPx Comparator instance + * @param BlankingSource This parameter can be one of the following values: + * @arg @ref LL_COMP_BLANKINGSRC_NONE + * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC4 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC3 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM15_OC2 (1) + * + * (1) Parameter availability depending on timer availability + * on the selected device. + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetOutputBlankingSource(COMP_TypeDef *COMPx, uint32_t BlankingSource) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_BLANKING, BlankingSource); +} + +/** + * @brief Get comparator instance blanking source. + * @note Availability of parameters of blanking source from timer + * depends on timers availability on the selected device. + * @note Blanking source may be specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR BLANKING LL_COMP_GetOutputBlankingSource + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_BLANKINGSRC_NONE + * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC4 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC3 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM15_OC2 (1) + * + * (1) Parameter availability depending on timer availability + * on the selected device. + */ +__STATIC_INLINE uint32_t LL_COMP_GetOutputBlankingSource(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_BLANKING)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Operation Operation on comparator instance + * @{ + */ + +/** + * @brief Enable comparator instance. + * @note After enable from off state, comparator requires a delay + * to reach reach propagation delay specification. + * Refer to device datasheet, parameter "tSTART". + * @rmtoll CSR EN LL_COMP_Enable + * @param COMPx Comparator instance + * @retval None + */ +__STATIC_INLINE void LL_COMP_Enable(COMP_TypeDef *COMPx) +{ + SET_BIT(COMPx->CSR, COMP_CSR_EN); +} + +/** + * @brief Disable comparator instance. + * @rmtoll CSR EN LL_COMP_Disable + * @param COMPx Comparator instance + * @retval None + */ +__STATIC_INLINE void LL_COMP_Disable(COMP_TypeDef *COMPx) +{ + CLEAR_BIT(COMPx->CSR, COMP_CSR_EN); +} + +/** + * @brief Get comparator enable state + * (0: COMP is disabled, 1: COMP is enabled) + * @rmtoll CSR EN LL_COMP_IsEnabled + * @param COMPx Comparator instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_COMP_IsEnabled(COMP_TypeDef *COMPx) +{ + return ((READ_BIT(COMPx->CSR, COMP_CSR_EN) == (COMP_CSR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Lock comparator instance. + * @note Once locked, comparator configuration can be accessed in read-only. + * @note The only way to unlock the comparator is a device hardware reset. + * @rmtoll CSR LOCK LL_COMP_Lock + * @param COMPx Comparator instance + * @retval None + */ +__STATIC_INLINE void LL_COMP_Lock(COMP_TypeDef *COMPx) +{ + SET_BIT(COMPx->CSR, COMP_CSR_LOCK); +} + +/** + * @brief Get comparator lock state + * (0: COMP is unlocked, 1: COMP is locked). + * @note Once locked, comparator configuration can be accessed in read-only. + * @note The only way to unlock the comparator is a device hardware reset. + * @rmtoll CSR LOCK LL_COMP_IsLocked + * @param COMPx Comparator instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_COMP_IsLocked(COMP_TypeDef *COMPx) +{ + return ((READ_BIT(COMPx->CSR, COMP_CSR_LOCK) == (COMP_CSR_LOCK)) ? 1UL : 0UL); +} + +/** + * @brief Read comparator instance output level. + * @note The comparator output level depends on the selected polarity + * (Refer to function @ref LL_COMP_SetOutputPolarity()). + * If the comparator polarity is not inverted: + * - Comparator output is low when the input plus + * is at a lower voltage than the input minus + * - Comparator output is high when the input plus + * is at a higher voltage than the input minus + * If the comparator polarity is inverted: + * - Comparator output is high when the input plus + * is at a lower voltage than the input minus + * - Comparator output is low when the input plus + * is at a higher voltage than the input minus + * @rmtoll CSR VALUE LL_COMP_ReadOutputLevel + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_OUTPUT_LEVEL_LOW + * @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH + */ +__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_VALUE) + >> LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup COMP_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx); +ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct); +void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 || COMP2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_COMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_cortex.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_cortex.h new file mode 100644 index 0000000..90917fa --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_cortex.h @@ -0,0 +1,587 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_CORTEX_H +#define STM32G0xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + if (Source == LL_SYSTICK_CLKSOURCE_HCLK) + { + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } + else + { + CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Architecture number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture + * @retval Value should be equal to 0xC for Cortex-M0+ devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC60 for Cortex-M0+ + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS + * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_CORTEX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crc.h new file mode 100644 index 0000000..5c2fe83 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crc.h @@ -0,0 +1,464 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_crc.h + * @author MCD Application Team + * @brief Header file of CRC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_CRC_H +#define STM32G0xx_LL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(CRC) + +/** @defgroup CRC_LL CRC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length + * @{ + */ +#define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse + * @{ + */ +#define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ +#define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ +#define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ +#define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse + * @{ + */ +#define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ +#define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value + * @brief Normal representation of this polynomial value is + * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . + * @{ + */ +#define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) + +/** + * @brief Read a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions + * @{ + */ + +/** + * @brief Reset the CRC calculation unit. + * @note If Programmable Initial CRC value feature + * is available, also set the Data Register to the value stored in the + * CRC_INIT register, otherwise, reset Data Register to its default value. + * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit + * @param CRCx CRC Instance + * @retval None + */ +__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) +{ + SET_BIT(CRCx->CR, CRC_CR_RESET); +} + +/** + * @brief Configure size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize + * @param CRCx CRC Instance + * @param PolySize This parameter can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) +{ + MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); +} + +/** + * @brief Return size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); +} + +/** + * @brief Configure the reversal of the bit order of the input data + * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); +} + +/** + * @brief Return type of reversal for input data bit order + * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + */ +__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); +} + +/** + * @brief Configure the reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); +} + +/** + * @brief Configure the reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + */ +__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); +} + +/** + * @brief Initialize the Programmable initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to write the correct value + * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. + * @rmtoll INIT INIT LL_CRC_SetInitialData + * @param CRCx CRC Instance + * @param InitCrc Value to be programmed in Programmable initial CRC value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) +{ + WRITE_REG(CRCx->INIT, InitCrc); +} + +/** + * @brief Return current Initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to read the correct value + * @rmtoll INIT INIT LL_CRC_GetInitialData + * @param CRCx CRC Instance + * @retval Value programmed in Programmable initial CRC value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetInitialData(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->INIT)); +} + +/** + * @brief Initialize the Programmable polynomial value + * (coefficients of the polynomial to be used for CRC calculation). + * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_SetPolynomialCoef + * @param CRCx CRC Instance + * @param PolynomCoef Value to be programmed in Programmable Polynomial value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) +{ + WRITE_REG(CRCx->POL, PolynomCoef); +} + +/** + * @brief Return current Programmable polynomial value + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_GetPolynomialCoef + * @param CRCx CRC Instance + * @retval Value programmed in Programmable Polynomial value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->POL)); +} + +/** + * @} + */ + +/** @defgroup CRC_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Write given 32-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData32 + * @param CRCx CRC Instance + * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) +{ + WRITE_REG(CRCx->DR, InData); +} + +/** + * @brief Write given 16-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData16 + * @param CRCx CRC Instance + * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) +{ + __IO uint16_t *pReg; + + pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = InData; +} + +/** + * @brief Write given 8-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData8 + * @param CRCx CRC Instance + * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) +{ + *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; +} + +/** + * @brief Return current CRC calculation result. 32 bits value is returned. + * @rmtoll DR DR LL_CRC_ReadData32 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). + */ +__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->DR)); +} + +/** + * @brief Return current CRC calculation result. 16 bits value is returned. + * @note This function is expected to be used in a 16 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData16 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). + */ +__STATIC_INLINE uint16_t LL_CRC_ReadData16(CRC_TypeDef *CRCx) +{ + return (uint16_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 8 bits value is returned. + * @note This function is expected to be used in a 8 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData8 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData8(CRC_TypeDef *CRCx) +{ + return (uint8_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 7 bits value is returned. + * @note This function is expected to be used in a 7 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData7 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData7(CRC_TypeDef *CRCx) +{ + return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); +} + +/** + * @brief Return data stored in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Read_IDR + * @param CRCx CRC Instance + * @retval Value stored in CRC_IDR register (General-purpose 32-bit data register). + */ +__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->IDR)); +} + +/** + * @brief Store data in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Write_IDR + * @param CRCx CRC Instance + * @param InData value to be stored in CRC_IDR register (32-bit) between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) +{ + *((uint32_t __IO *)(&CRCx->IDR)) = (uint32_t) InData; +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_CRC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crs.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crs.h new file mode 100644 index 0000000..da74275 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crs.h @@ -0,0 +1,783 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_crs.h + * @author MCD Application Team + * @brief Header file of CRS LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_CRS_H +#define STM32G0xx_LL_CRS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants + * @{ + */ + +/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CRS_ReadReg function + * @{ + */ +#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF +#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF +#define LL_CRS_ISR_ERRF CRS_ISR_ERRF +#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF +#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR +#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS +#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF +/** + * @} + */ + +/** @defgroup CRS_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions + * @{ + */ +#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE +#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE +#define LL_CRS_CR_ERRIE CRS_CR_ERRIE +#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider + * @{ + */ +#define LL_CRS_SYNC_DIV_1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source + * @{ + */ +#define LL_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity + * @{ + */ +#define LL_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction + * @{ + */ +#define LL_CRS_FREQ_ERROR_DIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define LL_CRS_FREQ_ERROR_DIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values + * @{ + */ +/** + * @brief Reset value of the RELOAD field + * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz + * and a synchronization signal frequency of 1 kHz (SOF signal from USB) + */ +#define LL_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU + +/** + * @brief Reset value of Frequency error limit. + */ +#define LL_CRS_ERRORLIMIT_DEFAULT 0x00000022U + +/** + * @brief Reset value of the HSI48 Calibration field + * @note The default value is 64, which corresponds to the middle of the trimming interval. + * The trimming step is specified in the product datasheet. + * A higher TRIM value corresponds to a higher output frequency. + */ +#define LL_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros + * @{ + */ + +/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload + * @{ + */ + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between + * the target frequency and the frequency of the synchronization source after + * prescaling. It is then decreased by one in order to reach the expected + * synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval Reload value (in Hz) + */ +#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions + * @{ + */ + +/** @defgroup CRS_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Frequency error counter + * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified + * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void) +{ + SET_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Disable Frequency error counter + * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Check if Frequency error counter is enabled or not + * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void) +{ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Disable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Check if Automatic trimming is enabled or not + * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI48 oscillator smooth trimming + * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only + * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming + * @param Value a number between Min_Data = 0 and Max_Data = 127 + * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos); +} + +/** + * @brief Get HSI48 oscillator smooth trimming + * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming + * @retval a number between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void) +{ + return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); +} + +/** + * @brief Set counter reload value + * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter + * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF + * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT + * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_) + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value); +} + +/** + * @brief Get counter reload value + * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter + * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); +} + +/** + * @brief Set frequency error limit + * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit + * @param Value a number between Min_Data = 0 and Max_Data = 255 + * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Get frequency error limit + * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit + * @retval A number between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Set division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider); +} + +/** + * @brief Get division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV)); +} + +/** + * @brief Set SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source); +} + +/** + * @brief Get SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC)); +} + +/** + * @brief Set input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity); +} + +/** + * @brief Get input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL)); +} + +/** + * @brief Configure CRS for the synchronization + * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n + * CFGR RELOAD LL_CRS_ConfigSynchronization\n + * CFGR FELIM LL_CRS_ConfigSynchronization\n + * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n + * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n + * CFGR SYNCPOL LL_CRS_ConfigSynchronization + * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 127 + * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF + * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255 + * @param Settings This parameter can be a combination of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8 + * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128 + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB + * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue); + MODIFY_REG(CRS->CFGR, + CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL, + ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_CRS_Management CRS_Management + * @{ + */ + +/** + * @brief Generate software SYNC event + * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Get the frequency error direction latched in the time of the last + * SYNC event + * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP + * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Get the frequency error counter value latched in the time of the last SYNC event + * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture + * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if SYNC event OK signal occurred or not + * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC warning signal occurred or not + * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Synchronization or trimming error signal occurred or not + * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Expected SYNC signal occurred or not + * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC error signal occurred or not + * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC missed error signal occurred or not + * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS)) ? 1UL : 0UL); +} + +/** + * @brief Check if Trimming overflow or underflow occurred or not + * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the SYNC event OK flag + * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); +} + +/** + * @brief Clear the SYNC warning flag + * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); +} + +/** + * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also + * the ERR flag + * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); +} + +/** + * @brief Clear Expected SYNC flag + * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Disable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Check if SYNC event OK interrupt is enabled or not + * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Disable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Check if SYNC warning interrupt is enabled or not + * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ERR(void) +{ + SET_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Disable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ERR(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Check if Synchronization or trimming error interrupt is enabled or not + * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Disable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Check if Expected SYNC interrupt is enabled or not + * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRS_DeInit(void); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_CRS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dac.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dac.h new file mode 100644 index 0000000..718a6ec --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dac.h @@ -0,0 +1,1775 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dac.h + * @author MCD Application Team + * @brief Header file of DAC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_DAC_H +#define STM32G0xx_LL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(DAC1) + +/** @defgroup DAC_LL DAC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Constants DAC Private Constants + * @{ + */ + +/* Internal masks for DAC channels definition */ +/* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */ +/* - channel bits position into registers CR, MCR, CCR, SHHR, SHRR */ +/* - channel bits position into register SWTRIG */ +/* - channel register offset of data holding register DHRx */ +/* - channel register offset of data output register DORx */ +/* - channel register offset of sample-and-hold sample time register SHSRx */ +#define DAC_CR_CH1_BITOFFSET 0U /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 1 */ +#define DAC_CR_CH2_BITOFFSET 16U /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 2 */ +#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET) + +#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. */ +#define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. */ +#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2) + +#define DAC_REG_DHR12R1_REGOFFSET 0x00000000U /* Register DHR12Rx channel 1 taken as reference */ +#define DAC_REG_DHR12L1_REGOFFSET 0x00100000U /* Register offset of DHR12Lx channel 1 versus DHR12Rx channel 1 (shifted left of 20 bits) */ +#define DAC_REG_DHR8R1_REGOFFSET 0x02000000U /* Register offset of DHR8Rx channel 1 versus DHR12Rx channel 1 (shifted left of 24 bits) */ +#define DAC_REG_DHR12R2_REGOFFSET 0x30000000U /* Register offset of DHR12Rx channel 2 versus DHR12Rx channel 1 (shifted left of 28 bits) */ +#define DAC_REG_DHR12L2_REGOFFSET 0x00400000U /* Register offset of DHR12Lx channel 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */ +#define DAC_REG_DHR8R2_REGOFFSET 0x05000000U /* Register offset of DHR8Rx channel 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */ +#define DAC_REG_DHR12RX_REGOFFSET_MASK 0xF0000000U +#define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000U +#define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000U +#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK) + +#define DAC_REG_DOR1_REGOFFSET 0x00000000U /* Register DORx channel 1 taken as reference */ +#define DAC_REG_DOR2_REGOFFSET 0x00000020U /* Register offset of DORx channel 1 versus DORx channel 2 (shifted left of 5 bits) */ +#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET) +#define DAC_REG_SHSR1_REGOFFSET 0x00000000U /* Register SHSRx channel 1 taken as reference */ +#define DAC_REG_SHSR2_REGOFFSET 0x00000040U /* Register offset of SHSRx channel 1 versus SHSRx channel 2 (shifted left of 6 bits) */ +#define DAC_REG_SHSRX_REGOFFSET_MASK (DAC_REG_SHSR1_REGOFFSET | DAC_REG_SHSR2_REGOFFSET) + + +#define DAC_REG_DHR_REGOFFSET_MASK_POSBIT0 0x0000000FU /* Mask of data hold registers offset (DHR12Rx, DHR12Lx, DHR8Rx, ...) when shifted to position 0 */ +#define DAC_REG_DORX_REGOFFSET_MASK_POSBIT0 0x00000001U /* Mask of DORx registers offset when shifted to position 0 */ +#define DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0 0x00000001U /* Mask of SHSRx registers offset when shifted to position 0 */ + +#define DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS 28U /* Position of bits register offset of DHR12Rx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 28 bits) */ +#define DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS 20U /* Position of bits register offset of DHR12Lx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */ +#define DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS 24U /* Position of bits register offset of DHR8Rx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */ +#define DAC_REG_DORX_REGOFFSET_BITOFFSET_POS 5U /* Position of bits register offset of DORx channel 1 or 2 versus DORx channel 1 (shifted left of 5 bits) */ +#define DAC_REG_SHSRX_REGOFFSET_BITOFFSET_POS 6U /* Position of bits register offset of SHSRx channel 1 or 2 versus SHSRx channel 1 (shifted left of 6 bits) */ + +/* DAC registers bits positions */ +#define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS DAC_DHR12RD_DACC2DHR_Pos +#define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS DAC_DHR12LD_DACC2DHR_Pos +#define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS DAC_DHR8RD_DACC2DHR_Pos + +/* Miscellaneous data */ +#define DAC_DIGITAL_SCALE_12BITS 4095U /* Full-scale digital value with a resolution of 12 bits (voltage range determined by analog voltage references Vref+ and Vref-, refer to reference manual) */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Macros DAC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address +*/ +#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2U)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_ES_INIT DAC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of DAC instance. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: internal (SW start) or from external peripheral (timer event, external interrupt line). + This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetTriggerSource(). */ + + uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveAutoGeneration(). */ + + uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel. + If waveform automatic generation mode is set to noise, this parameter can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS + If waveform automatic generation mode is set to triangle, this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE + @note If waveform automatic generation mode is disabled, this parameter is discarded. + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveNoiseLFSR(), @ref LL_DAC_SetWaveTriangleAmplitude() + depending on the wave automatic generation selected. */ + + uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetOutputBuffer(). */ + + + uint32_t OutputConnection; /*!< Set the output connection for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_OUTPUT_CONNECTION + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetOutputConnection(). */ + + uint32_t OutputMode; /*!< Set the output mode normal or sample-and-hold for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_OUTPUT_MODE + + This feature can be modified afterwards using unitary function @ref LL_DAC_SetOutputMode(). */ +} LL_DAC_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_LL_EC_GET_FLAG DAC flags + * @brief Flags defines which can be used with LL_DAC_ReadReg function + * @{ + */ +/* DAC channel 1 flags */ +#define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */ +#define LL_DAC_FLAG_CAL1 (DAC_SR_CAL_FLAG1) /*!< DAC channel 1 flag offset calibration status */ +#define LL_DAC_FLAG_BWST1 (DAC_SR_BWST1) /*!< DAC channel 1 flag busy writing sample time */ + +/* DAC channel 2 flags */ +#define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */ +#define LL_DAC_FLAG_CAL2 (DAC_SR_CAL_FLAG2) /*!< DAC channel 2 flag offset calibration status */ +#define LL_DAC_FLAG_BWST2 (DAC_SR_BWST2) /*!< DAC channel 2 flag busy writing sample time */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_IT DAC interruptions + * @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions + * @{ + */ +#define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */ +#define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_CHANNEL DAC channels + * @{ + */ +#define LL_DAC_CHANNEL_1 (DAC_REG_SHSR1_REGOFFSET | DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */ +#define LL_DAC_CHANNEL_2 (DAC_REG_SHSR2_REGOFFSET | DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OPERATING_MODE DAC operating mode + * @{ + */ +#define LL_DAC_MODE_NORMAL_OPERATION 0x00000000U /*!< DAC channel in mode normal operation */ +#define LL_DAC_MODE_CALIBRATION (DAC_CR_CEN1) /*!< DAC channel in mode calibration */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source + * @{ + */ +#define LL_DAC_TRIG_SOFTWARE 0x00000000U /*!< DAC channel conversion trigger internal (SW start) */ +#define LL_DAC_TRIG_EXT_TIM1_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM1 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM2_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: TIM2 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM3 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM6_TRGO ( DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM6 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: TIM7 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM15_TRGO (DAC_CR_TSEL1_3 ) /*!< DAC channel conversion trigger from external peripheral: TIM15 TRGO. */ +#define LL_DAC_TRIG_EXT_LPTIM1_OUT (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: LPTIM1 TRGO. */ +#define LL_DAC_TRIG_EXT_LPTIM2_OUT (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external peripheral: LPTIM2 TRGO. */ +#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: external interrupt line 9. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode + * @{ + */ +#define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000U /*!< DAC channel wave auto generation mode disabled. */ +#define LL_DAC_WAVE_AUTO_GENERATION_NOISE ( DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */ +#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1 ) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits + * @{ + */ +#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000U /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[6:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[7:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Noise wave generation, unmask LFSR bits[8:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[9:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[10:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[11:0], for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude + * @{ + */ +#define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000U /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 127 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 255 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Triangle wave generation, amplitude of 512 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 1023 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 2047 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 4095 LSB of DAC output range, for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OUTPUT_MODE DAC channel output mode + * @{ + */ +#define LL_DAC_OUTPUT_MODE_NORMAL 0x00000000U /*!< The selected DAC channel output is on mode normal. */ +#define LL_DAC_OUTPUT_MODE_SAMPLE_AND_HOLD (DAC_MCR_MODE1_2) /*!< The selected DAC channel output is on mode sample-and-hold. Mode sample-and-hold requires an external capacitor, refer to description of function @ref LL_DAC_ConfigOutput() or @ref LL_DAC_SetOutputMode(). */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer + * @{ + */ +#define LL_DAC_OUTPUT_BUFFER_ENABLE 0x00000000U /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */ +#define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_MCR_MODE1_1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OUTPUT_CONNECTION DAC channel output connection + * @{ + */ +#define LL_DAC_OUTPUT_CONNECT_GPIO 0x00000000U /*!< The selected DAC channel output is connected to external pin */ +#define LL_DAC_OUTPUT_CONNECT_INTERNAL (DAC_MCR_MODE1_0) /*!< The selected DAC channel output is connected to on-chip peripherals via internal paths. On this STM32 series, output connection depends on output mode (normal or sample and hold) and output buffer state. Refer to comments of function @ref LL_DAC_SetOutputConnection(). */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution + * @{ + */ +#define LL_DAC_RESOLUTION_12B 0x00000000U /*!< DAC channel resolution 12 bits */ +#define LL_DAC_RESOLUTION_8B 0x00000002U /*!< DAC channel resolution 8 bits */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_REGISTERS DAC registers compliant with specific purpose + * @{ + */ +/* List of DAC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_DAC_DMA_GetRegAddr(). */ +#define LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits right aligned */ +#define LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits left aligned */ +#define LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 8 bits right aligned */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays + * @note Only DAC peripheral HW delays are defined in DAC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Delay for DAC channel voltage settling time from DAC channel startup */ +/* (transition from disable to enable). */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm (min), 50pF (max) */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tWAKEUP"). */ +/* Unit: us */ +#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 8U /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */ + +/* Delay for DAC channel voltage settling time. */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm min, 50pF max */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSETTLING"). */ +/* Unit: us */ +#define LL_DAC_DELAY_VOLTAGE_SETTLING_US 3U /*!< Delay for DAC channel voltage settling time */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros + * @{ + */ + +/** + * @brief Write a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) + +/** + * @} + */ + +/** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro + * @{ + */ + +/** + * @brief Helper macro to get DAC channel number in decimal format + * from literals LL_DAC_CHANNEL_x. + * Example: + * __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1) + * will return decimal number "1". + * @note The input can be a value from functions where a channel + * number is returned. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval 1...2 + */ +#define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((__CHANNEL__) & DAC_SWTR_CHX_MASK) + +/** + * @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x + * from number in decimal format. + * Example: + * __LL_DAC_DECIMAL_NB_TO_CHANNEL(1) + * will return a data equivalent to "LL_DAC_CHANNEL_1". + * @note If the input parameter does not correspond to a DAC channel, + * this macro returns value '0'. + * @param __DECIMAL_NB__ 1...2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + */ +#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) == 1U) \ + ? ( \ + LL_DAC_CHANNEL_1 \ + ) \ + : \ + (((__DECIMAL_NB__) == 2U) \ + ? ( \ + LL_DAC_CHANNEL_2 \ + ) \ + : \ + ( \ + 0U \ + ) \ + ) \ + ) + +/** + * @brief Helper macro to define the DAC conversion data full-scale digital + * value corresponding to the selected DAC resolution. + * @note DAC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + ((0x00000FFFU) >> ((__DAC_RESOLUTION__) << 1U)) + +/** + * @brief Helper macro to calculate the DAC conversion data (unit: digital + * value) corresponding to a voltage (unit: mVolt). + * @note This helper macro is intended to provide input data in voltage + * rather than digital value, + * to be used with LL DAC functions such as + * @ref LL_DAC_ConvertData12RightAligned(). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel + * (unit: mVolt). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval DAC conversion data (unit: digital value) + */ +#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__,\ + __DAC_VOLTAGE__,\ + __DAC_RESOLUTION__) \ + ((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + / (__VREFANALOG_VOLTAGE__) \ + ) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Functions DAC Exported Functions + * @{ + */ +/** @defgroup DAC_LL_EF_Configuration Configuration of DAC channels + * @{ + */ + +/** + * @brief Set the operating mode for the selected DAC channel: + * calibration or normal operating mode. + * @rmtoll CR CEN1 LL_DAC_SetMode\n + * CR CEN2 LL_DAC_SetMode + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param ChannelMode This parameter can be one of the following values: + * @arg @ref LL_DAC_MODE_NORMAL_OPERATION + * @arg @ref LL_DAC_MODE_CALIBRATION + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetMode(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t ChannelMode) +{ + MODIFY_REG(DACx->CR, + DAC_CR_CEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + ChannelMode << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the operating mode for the selected DAC channel: + * calibration or normal operating mode. + * @rmtoll CR CEN1 LL_DAC_GetMode\n + * CR CEN2 LL_DAC_GetMode + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_MODE_NORMAL_OPERATION + * @arg @ref LL_DAC_MODE_CALIBRATION + */ +__STATIC_INLINE uint32_t LL_DAC_GetMode(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_CEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the offset trimming value for the selected DAC channel. + * Trimming has an impact when output buffer is enabled + * and is intended to replace factory calibration default values. + * @rmtoll CCR OTRIM1 LL_DAC_SetTrimmingValue\n + * CCR OTRIM2 LL_DAC_SetTrimmingValue + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param TrimmingValue Value between Min_Data=0x00 and Max_Data=0x1F + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetTrimmingValue(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TrimmingValue) +{ + MODIFY_REG(DACx->CCR, + DAC_CCR_OTRIM1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TrimmingValue << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the offset trimming value for the selected DAC channel. + * Trimming has an impact when output buffer is enabled + * and is intended to replace factory calibration default values. + * @rmtoll CCR OTRIM1 LL_DAC_GetTrimmingValue\n + * CCR OTRIM2 LL_DAC_GetTrimmingValue + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval TrimmingValue Value between Min_Data=0x00 and Max_Data=0x1F + */ +__STATIC_INLINE uint32_t LL_DAC_GetTrimmingValue(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CCR, DAC_CCR_OTRIM1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note To set conversion trigger source, DAC channel must be disabled. + * Otherwise, the setting is discarded. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL1 LL_DAC_SetTriggerSource\n + * CR TSEL2 LL_DAC_SetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO + * @arg @ref LL_DAC_TRIG_EXT_LPTIM1_OUT + * @arg @ref LL_DAC_TRIG_EXT_LPTIM2_OUT + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource) +{ + MODIFY_REG(DACx->CR, + DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL1 LL_DAC_GetTriggerSource\n + * CR TSEL2 LL_DAC_GetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO + * @arg @ref LL_DAC_TRIG_EXT_LPTIM1_OUT + * @arg @ref LL_DAC_TRIG_EXT_LPTIM2_OUT + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 + */ +__STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE1 LL_DAC_SetWaveAutoGeneration\n + * CR WAVE2 LL_DAC_SetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param WaveAutoGeneration This parameter can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration) +{ + MODIFY_REG(DACx->CR, + DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE1 LL_DAC_GetWaveAutoGeneration\n + * CR WAVE2 LL_DAC_GetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP1 LL_DAC_SetWaveNoiseLFSR\n + * CR MAMP2 LL_DAC_SetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param NoiseLFSRMask This parameter can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @rmtoll CR MAMP1 LL_DAC_GetWaveNoiseLFSR\n + * CR MAMP2 LL_DAC_GetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP1 LL_DAC_SetWaveTriangleAmplitude\n + * CR MAMP2 LL_DAC_SetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param TriangleAmplitude This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, + uint32_t TriangleAmplitude) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @rmtoll CR MAMP1 LL_DAC_GetWaveTriangleAmplitude\n + * CR MAMP2 LL_DAC_GetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the output for the selected DAC channel. + * @note This function set several features: + * - mode normal or sample-and-hold + * - buffer + * - connection to GPIO or internal path. + * These features can also be set individually using + * dedicated functions: + * - @ref LL_DAC_SetOutputBuffer() + * - @ref LL_DAC_SetOutputMode() + * - @ref LL_DAC_SetOutputConnection() + * @note On this STM32 series, output connection depends on output mode + * (normal or sample and hold) and output buffer state. + * - if output connection is set to internal path and output buffer + * is enabled (whatever output mode): + * output connection is also connected to GPIO pin + * (both connections to GPIO pin and internal path). + * - if output connection is set to GPIO pin, output buffer + * is disabled, output mode set to sample and hold: + * output connection is also connected to internal path + * (both connections to GPIO pin and internal path). + * @note Mode sample-and-hold requires an external capacitor + * to be connected between DAC channel output and ground. + * Capacitor value depends on load on DAC channel output and + * sample-and-hold timings configured. + * As indication, capacitor typical value is 100nF + * (refer to device datasheet, parameter "CSH"). + * @rmtoll CR MODE1 LL_DAC_ConfigOutput\n + * CR MODE2 LL_DAC_ConfigOutput + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param OutputMode This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_MODE_NORMAL + * @arg @ref LL_DAC_OUTPUT_MODE_SAMPLE_AND_HOLD + * @param OutputBuffer This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + * @param OutputConnection This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_CONNECT_GPIO + * @arg @ref LL_DAC_OUTPUT_CONNECT_INTERNAL + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConfigOutput(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputMode, + uint32_t OutputBuffer, uint32_t OutputConnection) +{ + MODIFY_REG(DACx->MCR, + (DAC_MCR_MODE1_2 | DAC_MCR_MODE1_1 | DAC_MCR_MODE1_0) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + (OutputMode | OutputBuffer | OutputConnection) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Set the output mode normal or sample-and-hold + * for the selected DAC channel. + * @note Mode sample-and-hold requires an external capacitor + * to be connected between DAC channel output and ground. + * Capacitor value depends on load on DAC channel output and + * sample-and-hold timings configured. + * As indication, capacitor typical value is 100nF + * (refer to device datasheet, parameter "CSH"). + * @rmtoll CR MODE1 LL_DAC_SetOutputMode\n + * CR MODE2 LL_DAC_SetOutputMode + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param OutputMode This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_MODE_NORMAL + * @arg @ref LL_DAC_OUTPUT_MODE_SAMPLE_AND_HOLD + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetOutputMode(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputMode) +{ + MODIFY_REG(DACx->MCR, + (uint32_t)DAC_MCR_MODE1_2 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + OutputMode << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the output mode normal or sample-and-hold for the selected DAC channel. + * @rmtoll CR MODE1 LL_DAC_GetOutputMode\n + * CR MODE2 LL_DAC_GetOutputMode + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_MODE_NORMAL + * @arg @ref LL_DAC_OUTPUT_MODE_SAMPLE_AND_HOLD + */ +__STATIC_INLINE uint32_t LL_DAC_GetOutputMode(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->MCR, (uint32_t)DAC_MCR_MODE1_2 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the output buffer for the selected DAC channel. + * @note On this STM32 series, when buffer is enabled, its offset can be + * trimmed: factory calibration default values can be + * replaced by user trimming values, using function + * @ref LL_DAC_SetTrimmingValue(). + * @rmtoll CR MODE1 LL_DAC_SetOutputBuffer\n + * CR MODE2 LL_DAC_SetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param OutputBuffer This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer) +{ + MODIFY_REG(DACx->MCR, + (uint32_t)DAC_MCR_MODE1_1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the output buffer state for the selected DAC channel. + * @rmtoll CR MODE1 LL_DAC_GetOutputBuffer\n + * CR MODE2 LL_DAC_GetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->MCR, (uint32_t)DAC_MCR_MODE1_1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the output connection for the selected DAC channel. + * @note On this STM32 series, output connection depends on output mode (normal or + * sample and hold) and output buffer state. + * - if output connection is set to internal path and output buffer + * is enabled (whatever output mode): + * output connection is also connected to GPIO pin + * (both connections to GPIO pin and internal path). + * - if output connection is set to GPIO pin, output buffer + * is disabled, output mode set to sample and hold: + * output connection is also connected to internal path + * (both connections to GPIO pin and internal path). + * @rmtoll CR MODE1 LL_DAC_SetOutputConnection\n + * CR MODE2 LL_DAC_SetOutputConnection + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param OutputConnection This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_CONNECT_GPIO + * @arg @ref LL_DAC_OUTPUT_CONNECT_INTERNAL + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetOutputConnection(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputConnection) +{ + MODIFY_REG(DACx->MCR, + (uint32_t)DAC_MCR_MODE1_0 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + OutputConnection << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the output connection for the selected DAC channel. + * @note On this STM32 series, output connection depends on output mode (normal or + * sample and hold) and output buffer state. + * - if output connection is set to internal path and output buffer + * is enabled (whatever output mode): + * output connection is also connected to GPIO pin + * (both connections to GPIO pin and internal path). + * - if output connection is set to GPIO pin, output buffer + * is disabled, output mode set to sample and hold: + * output connection is also connected to internal path + * (both connections to GPIO pin and internal path). + * @rmtoll CR MODE1 LL_DAC_GetOutputConnection\n + * CR MODE2 LL_DAC_GetOutputConnection + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_CONNECT_GPIO + * @arg @ref LL_DAC_OUTPUT_CONNECT_INTERNAL + */ +__STATIC_INLINE uint32_t LL_DAC_GetOutputConnection(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->MCR, (uint32_t)DAC_MCR_MODE1_0 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the sample-and-hold timing for the selected DAC channel: + * sample time + * @note Sample time must be set when DAC channel is disabled + * or during DAC operation when DAC channel flag BWSTx is reset, + * otherwise the setting is ignored. + * Check BWSTx flag state using function "LL_DAC_IsActiveFlag_BWSTx()". + * @rmtoll SHSR1 TSAMPLE1 LL_DAC_SetSampleAndHoldSampleTime\n + * SHSR2 TSAMPLE2 LL_DAC_SetSampleAndHoldSampleTime + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param SampleTime Value between Min_Data=0x000 and Max_Data=0x3FF + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetSampleAndHoldSampleTime(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t SampleTime) +{ + __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->SHSR1, (DAC_Channel >> DAC_REG_SHSRX_REGOFFSET_BITOFFSET_POS) & DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0); + + MODIFY_REG(*preg, + DAC_SHSR1_TSAMPLE1, + SampleTime); +} + +/** + * @brief Get the sample-and-hold timing for the selected DAC channel: + * sample time + * @rmtoll SHSR1 TSAMPLE1 LL_DAC_GetSampleAndHoldSampleTime\n + * SHSR2 TSAMPLE2 LL_DAC_GetSampleAndHoldSampleTime + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint32_t LL_DAC_GetSampleAndHoldSampleTime(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + __IO uint32_t const *preg = __DAC_PTR_REG_OFFSET(DACx->SHSR1, (DAC_Channel >> DAC_REG_SHSRX_REGOFFSET_BITOFFSET_POS) & DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0); + + return (uint32_t) READ_BIT(*preg, DAC_SHSR1_TSAMPLE1); +} + +/** + * @brief Set the sample-and-hold timing for the selected DAC channel: + * hold time + * @rmtoll SHHR THOLD1 LL_DAC_SetSampleAndHoldHoldTime\n + * SHHR THOLD2 LL_DAC_SetSampleAndHoldHoldTime + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param HoldTime Value between Min_Data=0x000 and Max_Data=0x3FF + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetSampleAndHoldHoldTime(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t HoldTime) +{ + MODIFY_REG(DACx->SHHR, + DAC_SHHR_THOLD1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + HoldTime << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the sample-and-hold timing for the selected DAC channel: + * hold time + * @rmtoll SHHR THOLD1 LL_DAC_GetSampleAndHoldHoldTime\n + * SHHR THOLD2 LL_DAC_GetSampleAndHoldHoldTime + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint32_t LL_DAC_GetSampleAndHoldHoldTime(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->SHHR, DAC_SHHR_THOLD1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the sample-and-hold timing for the selected DAC channel: + * refresh time + * @rmtoll SHRR TREFRESH1 LL_DAC_SetSampleAndHoldRefreshTime\n + * SHRR TREFRESH2 LL_DAC_SetSampleAndHoldRefreshTime + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param RefreshTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetSampleAndHoldRefreshTime(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t RefreshTime) +{ + MODIFY_REG(DACx->SHRR, + DAC_SHRR_TREFRESH1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + RefreshTime << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the sample-and-hold timing for the selected DAC channel: + * refresh time + * @rmtoll SHRR TREFRESH1 LL_DAC_GetSampleAndHoldRefreshTime\n + * SHRR TREFRESH2 LL_DAC_GetSampleAndHoldRefreshTime + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DAC_GetSampleAndHoldRefreshTime(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->SHRR, DAC_SHRR_TREFRESH1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN1 LL_DAC_EnableDMAReq\n + * CR DMAEN2 LL_DAC_EnableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN1 LL_DAC_DisableDMAReq\n + * CR DMAEN2 LL_DAC_DisableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC DMA transfer request state of the selected channel. + * (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled) + * @rmtoll CR DMAEN1 LL_DAC_IsDMAReqEnabled\n + * CR DMAEN2 LL_DAC_IsDMAReqEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Function to help to configure DMA transfer to DAC: retrieve the + * DAC register address from DAC instance and a list of DAC registers + * intended to be used (most commonly) with DMA transfer. + * @note These DAC registers are data holding registers: + * when DAC conversion is requested, DAC generates a DMA transfer + * request to have data available in DAC data holding registers. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * (uint32_t)&< array or variable >, + * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED), + * LL_DMA_DIRECTION_MEMORY_TO_PERIPH); + * @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR8R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR12R2 DACC2DHR LL_DAC_DMA_GetRegAddr\n + * DHR12L2 DACC2DHR LL_DAC_DMA_GetRegAddr\n + * DHR8R2 DACC2DHR LL_DAC_DMA_GetRegAddr + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Register This parameter can be one of the following values: + * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED + * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED + * @arg @ref LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED + * @retval DAC register address + */ +__STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Register) +{ + /* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */ + /* DAC channel selected. */ + return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, + ((DAC_Channel >> (Register & 0x1FUL)) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0)))); +} +/** + * @} + */ + +/** @defgroup DAC_LL_EF_Operation Operation on DAC channels + * @{ + */ + +/** + * @brief Enable DAC selected channel. + * @rmtoll CR EN1 LL_DAC_Enable\n + * CR EN2 LL_DAC_Enable + * @note After enable from off state, DAC channel requires a delay + * for output voltage to reach accuracy +/- 1 LSB. + * Refer to device datasheet, parameter "tWAKEUP". + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC selected channel. + * @rmtoll CR EN1 LL_DAC_Disable\n + * CR EN2 LL_DAC_Disable + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC enable state of the selected channel. + * (0: DAC channel is disabled, 1: DAC channel is enabled) + * @rmtoll CR EN1 LL_DAC_IsEnabled\n + * CR EN2 LL_DAC_IsEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Enable DAC trigger of the selected channel. + * @note - If DAC trigger is disabled, DAC conversion is performed + * automatically once the data holding register is updated, + * using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ... + * - If DAC trigger is enabled, DAC conversion is performed + * only when a hardware of software trigger event is occurring. + * Select trigger source using + * function @ref LL_DAC_SetTriggerSource(). + * @rmtoll CR TEN1 LL_DAC_EnableTrigger\n + * CR TEN2 LL_DAC_EnableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC trigger of the selected channel. + * @rmtoll CR TEN1 LL_DAC_DisableTrigger\n + * CR TEN2 LL_DAC_DisableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC trigger state of the selected channel. + * (0: DAC trigger is disabled, 1: DAC trigger is enabled) + * @rmtoll CR TEN1 LL_DAC_IsTriggerEnabled\n + * CR TEN2 LL_DAC_IsTriggerEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Trig DAC conversion by software for the selected DAC channel. + * @note Preliminarily, DAC trigger must be set to software trigger + * using function + * @ref LL_DAC_Init() + * @ref LL_DAC_SetTriggerSource() + * with parameter "LL_DAC_TRIGGER_SOFTWARE". + * and DAC trigger must be enabled using + * function @ref LL_DAC_EnableTrigger(). + * @note For devices featuring DAC with 2 channels: this function + * can perform a SW start of both DAC channels simultaneously. + * Two channels can be selected as parameter. + * Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2) + * @rmtoll SWTRIGR SWTRIG1 LL_DAC_TrigSWConversion\n + * SWTRIGR SWTRIG2 LL_DAC_TrigSWConversion + * @param DACx DAC instance + * @param DAC_Channel This parameter can a combination of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->SWTRIGR, + (DAC_Channel & DAC_SWTR_CHX_MASK)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (LSB aligned on bit 0), + * for the selected DAC channel. + * @rmtoll DHR12R1 DACC1DHR LL_DAC_ConvertData12RightAligned\n + * DHR12R2 DACC2DHR LL_DAC_ConvertData12RightAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); + + MODIFY_REG(*preg, + DAC_DHR12R1_DACC1DHR, + Data); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (MSB aligned on bit 15), + * for the selected DAC channel. + * @rmtoll DHR12L1 DACC1DHR LL_DAC_ConvertData12LeftAligned\n + * DHR12L2 DACC2DHR LL_DAC_ConvertData12LeftAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); + + MODIFY_REG(*preg, + DAC_DHR12L1_DACC1DHR, + Data); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 8 bits left alignment (LSB aligned on bit 0), + * for the selected DAC channel. + * @rmtoll DHR8R1 DACC1DHR LL_DAC_ConvertData8RightAligned\n + * DHR8R2 DACC2DHR LL_DAC_ConvertData8RightAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); + + MODIFY_REG(*preg, + DAC_DHR8R1_DACC1DHR, + Data); +} + + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (LSB aligned on bit 0), + * for both DAC channels. + * @rmtoll DHR12RD DACC1DHR LL_DAC_ConvertDualData12RightAligned\n + * DHR12RD DACC2DHR LL_DAC_ConvertDualData12RightAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF + * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData12RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, + uint32_t DataChannel2) +{ + MODIFY_REG(DACx->DHR12RD, + (DAC_DHR12RD_DACC2DHR | DAC_DHR12RD_DACC1DHR), + ((DataChannel2 << DAC_DHR12RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (MSB aligned on bit 15), + * for both DAC channels. + * @rmtoll DHR12LD DACC1DHR LL_DAC_ConvertDualData12LeftAligned\n + * DHR12LD DACC2DHR LL_DAC_ConvertDualData12LeftAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF + * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData12LeftAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, + uint32_t DataChannel2) +{ + /* Note: Data of DAC channel 2 shift value subtracted of 4 because */ + /* data on 16 bits and DAC channel 2 bits field is on the 12 MSB, */ + /* the 4 LSB must be taken into account for the shift value. */ + MODIFY_REG(DACx->DHR12LD, + (DAC_DHR12LD_DACC2DHR | DAC_DHR12LD_DACC1DHR), + ((DataChannel2 << (DAC_DHR12LD_DACC2DHR_BITOFFSET_POS - 4U)) | DataChannel1)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 8 bits left alignment (LSB aligned on bit 0), + * for both DAC channels. + * @rmtoll DHR8RD DACC1DHR LL_DAC_ConvertDualData8RightAligned\n + * DHR8RD DACC2DHR LL_DAC_ConvertDualData8RightAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x00 and Max_Data=0xFF + * @param DataChannel2 Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, + uint32_t DataChannel2) +{ + MODIFY_REG(DACx->DHR8RD, + (DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR), + ((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); +} + + +/** + * @brief Retrieve output data currently generated for the selected DAC channel. + * @note Whatever alignment and resolution settings + * (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ...), + * output data format is 12 bits right aligned (LSB aligned on bit 0). + * @rmtoll DOR1 DACC1DOR LL_DAC_RetrieveOutputData\n + * DOR2 DACC2DOR LL_DAC_RetrieveOutputData + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + __IO uint32_t const *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, (DAC_Channel >> DAC_REG_DORX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DORX_REGOFFSET_MASK_POSBIT0); + + return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management + * @{ + */ +/** + * @brief Get DAC calibration offset flag for DAC channel 1 + * @rmtoll SR CAL_FLAG1 LL_DAC_IsActiveFlag_CAL1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_CAL1(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_CAL1) == (LL_DAC_FLAG_CAL1)) ? 1UL : 0UL); +} + + +/** + * @brief Get DAC calibration offset flag for DAC channel 2 + * @rmtoll SR CAL_FLAG2 LL_DAC_IsActiveFlag_CAL2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_CAL2(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_CAL2) == (LL_DAC_FLAG_CAL2)) ? 1UL : 0UL); +} + + +/** + * @brief Get DAC busy writing sample time flag for DAC channel 1 + * @rmtoll SR BWST1 LL_DAC_IsActiveFlag_BWST1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_BWST1(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_BWST1) == (LL_DAC_FLAG_BWST1)) ? 1UL : 0UL); +} + + +/** + * @brief Get DAC busy writing sample time flag for DAC channel 2 + * @rmtoll SR BWST2 LL_DAC_IsActiveFlag_BWST2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_BWST2(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_BWST2) == (LL_DAC_FLAG_BWST2)) ? 1UL : 0UL); +} + + +/** + * @brief Get DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1)) ? 1UL : 0UL); +} + + +/** + * @brief Get DAC underrun flag for DAC channel 2 + * @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2)) ? 1UL : 0UL); +} + + +/** + * @brief Clear DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx) +{ + WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1); +} + + +/** + * @brief Clear DAC underrun flag for DAC channel 2 + * @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx) +{ + WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2); +} + + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_IT_Management IT management + * @{ + */ + +/** + * @brief Enable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); +} + + +/** + * @brief Enable DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); +} + + +/** + * @brief Disable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); +} + + +/** + * @brief Disable DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); +} + + +/** + * @brief Get DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1)) ? 1UL : 0UL); +} + + +/** + * @brief Get DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2)) ? 1UL : 0UL); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_DAC_DeInit(DAC_TypeDef *DACx); +ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef *DAC_InitStruct); +void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_DAC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h new file mode 100644 index 0000000..14727c2 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h @@ -0,0 +1,2272 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_DMA_H +#define STM32G0xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "stm32g0xx_ll_dmamux.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), +#if defined(DMA1_Channel6_BASE) + (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE), +#endif +#if defined(DMA1_Channel7_BASE) + (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE), +#endif +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @brief Helper macro to convert DMA Instance DMAx into DMAMUX channel + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @param __DMA_INSTANCE__ DMAx + * @retval Channel_Offset (LL_DMA_CHANNEL_7 or 0). + */ +#define __LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(__DMA_INSTANCE__) \ +(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) ? 0 : LL_DMA_CHANNEL_7) +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000000U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000001U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000002U /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 0x00000003U /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 0x00000004U /*!< DMA Channel 5 */ +#if defined(DMA1_Channel6) +#define LL_DMA_CHANNEL_6 0x00000005U /*!< DMA Channel 6 */ +#endif +#if defined(DMA1_Channel7) +#define LL_DMA_CHANNEL_7 0x00000006U /*!< DMA Channel 7 */ +#endif +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#if defined(DMA2) +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1) +#else /* DMA1 */ +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) +#endif + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#if defined(DMA2) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + LL_DMA_CHANNEL_5) +#endif +#endif /* DMA2 */ + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#if defined(DMA2) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + DMA1_Channel5) +#endif +#endif /* DMA2 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each peripheral using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +/** + * @brief Set DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + MODIFY_REG((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + return (READ_BIT((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Clear Channel 1 global interrupt flag. + * @note Do not Clear Channel 1 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC1, LL_DMA_ClearFlag_HT1, + LL_DMA_ClearFlag_TE1. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @note Do not Clear Channel 2 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC2, LL_DMA_ClearFlag_HT2, + LL_DMA_ClearFlag_TE2. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @note Do not Clear Channel 3 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC3, LL_DMA_ClearFlag_HT3, + LL_DMA_ClearFlag_TE3. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @note Do not Clear Channel 4 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC4, LL_DMA_ClearFlag_HT4, + LL_DMA_ClearFlag_TE4. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @note Do not Clear Channel 5 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC5, LL_DMA_ClearFlag_HT5, + LL_DMA_ClearFlag_TE5. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 global interrupt flag. + * @note Do not Clear Channel 6 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC6, LL_DMA_ClearFlag_HT6, + LL_DMA_ClearFlag_TE6. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 global interrupt flag. + * @note Do not Clear Channel 7 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC7, LL_DMA_ClearFlag_HT7, + LL_DMA_ClearFlag_TE7. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); +} + +#endif +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); +} + +#endif +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); +} + +#endif +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); +} + +#endif +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); +} + +#endif +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h new file mode 100644 index 0000000..9b7a71a --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h @@ -0,0 +1,1828 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_DMAMUX_H +#define STM32G0xx_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004UL + +/* Define used to get DMAMUX RGCR register size */ +#define DMAMUX_RGCR_SIZE 0x00000004UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ +/** @defgroup DMAMUX_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_WriteReg function + * @{ + */ +#define LL_DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#endif +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#endif +#if defined(DMA2) +#define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#endif /* DMA2 */ +#define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF3 DMAMUX_RGCFR_COF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_ReadReg function + * @{ + */ +#define LL_DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#endif +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#endif +#if defined(DMA2) +#define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#endif /* DMA2 */ +#define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF3 DMAMUX_RGSR_OF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMAMUX_WriteReg functions + * @{ + */ +#define LL_DMAMUX_CCR_SOIE DMAMUX_CxCR_SOIE /*!< Synchronization Event Overrun Interrupt */ +#define LL_DMAMUX_RGCR_RGOIE DMAMUX_RGxCR_OIE /*!< Request Generation Trigger Event Overrun Interrupt */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST Transfer request + * @{ + */ +#define LL_DMAMUX_REQ_MEM2MEM 0x00000000U /*!< memory to memory transfer */ +#define LL_DMAMUX_REQ_GENERATOR0 0x00000001U /*!< DMAMUX request generator 0 */ +#define LL_DMAMUX_REQ_GENERATOR1 0x00000002U /*!< DMAMUX request generator 1 */ +#define LL_DMAMUX_REQ_GENERATOR2 0x00000003U /*!< DMAMUX request generator 2 */ +#define LL_DMAMUX_REQ_GENERATOR3 0x00000004U /*!< DMAMUX request generator 3 */ +#define LL_DMAMUX_REQ_ADC1 0x00000005U /*!< DMAMUX ADC1 request */ +#if defined(AES) +#define LL_DMAMUX_REQ_AES_IN 0x00000006U /*!< DMAMUX AES_IN request */ +#define LL_DMAMUX_REQ_AES_OUT 0x00000007U /*!< DMAMUX AES_OUT request */ +#endif +#if defined(DAC1) +#define LL_DMAMUX_REQ_DAC1_CH1 0x00000008U /*!< DMAMUX DAC_CH1 request */ +#define LL_DMAMUX_REQ_DAC1_CH2 0x00000009U /*!< DMAMUX DAC_CH2 request */ +#endif +#define LL_DMAMUX_REQ_I2C1_RX 0x0000000AU /*!< DMAMUX I2C1 RX request */ +#define LL_DMAMUX_REQ_I2C1_TX 0x0000000BU /*!< DMAMUX I2C1 TX request */ +#define LL_DMAMUX_REQ_I2C2_RX 0x0000000CU /*!< DMAMUX I2C2 RX request */ +#define LL_DMAMUX_REQ_I2C2_TX 0x0000000DU /*!< DMAMUX I2C2 TX request */ +#if defined(LPUART1) +#define LL_DMAMUX_REQ_LPUART1_RX 0x0000000EU /*!< DMAMUX LPUART1 RX request */ +#define LL_DMAMUX_REQ_LPUART1_TX 0x0000000FU /*!< DMAMUX LPUART1 TX request */ +#endif +#define LL_DMAMUX_REQ_SPI1_RX 0x00000010U /*!< DMAMUX SPI1 RX request */ +#define LL_DMAMUX_REQ_SPI1_TX 0x00000011U /*!< DMAMUX SPI1 TX request */ +#define LL_DMAMUX_REQ_SPI2_RX 0x00000012U /*!< DMAMUX SPI2 RX request */ +#define LL_DMAMUX_REQ_SPI2_TX 0x00000013U /*!< DMAMUX SPI2 TX request */ +#define LL_DMAMUX_REQ_TIM1_CH1 0x00000014U /*!< DMAMUX TIM1 CH1 request */ +#define LL_DMAMUX_REQ_TIM1_CH2 0x00000015U /*!< DMAMUX TIM1 CH2 request */ +#define LL_DMAMUX_REQ_TIM1_CH3 0x00000016U /*!< DMAMUX TIM1 CH3 request */ +#define LL_DMAMUX_REQ_TIM1_CH4 0x00000017U /*!< DMAMUX TIM1 CH4 request */ +#define LL_DMAMUX_REQ_TIM1_TRIG_COM 0x00000018U /*!< DMAMUX TIM1 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM1_UP 0x00000019U /*!< DMAMUX TIM1 UP request */ +#if defined(TIM2) +#define LL_DMAMUX_REQ_TIM2_CH1 0x0000001AU /*!< DMAMUX TIM2 CH1 request */ +#define LL_DMAMUX_REQ_TIM2_CH2 0x0000001BU /*!< DMAMUX TIM2 CH2 request */ +#define LL_DMAMUX_REQ_TIM2_CH3 0x0000001CU /*!< DMAMUX TIM2 CH3 request */ +#define LL_DMAMUX_REQ_TIM2_CH4 0x0000001DU /*!< DMAMUX TIM2 CH4 request */ +#define LL_DMAMUX_REQ_TIM2_TRIG 0x0000001EU /*!< DMAMUX TIM2 TRIG request */ +#define LL_DMAMUX_REQ_TIM2_UP 0x0000001FU /*!< DMAMUX TIM2 UP request */ +#endif +#define LL_DMAMUX_REQ_TIM3_CH1 0x00000020U /*!< DMAMUX TIM3 CH1 request */ +#define LL_DMAMUX_REQ_TIM3_CH2 0x00000021U /*!< DMAMUX TIM3 CH2 request */ +#define LL_DMAMUX_REQ_TIM3_CH3 0x00000022U /*!< DMAMUX TIM3 CH3 request */ +#define LL_DMAMUX_REQ_TIM3_CH4 0x00000023U /*!< DMAMUX TIM3 CH4 request */ +#define LL_DMAMUX_REQ_TIM3_TRIG 0x00000024U /*!< DMAMUX TIM3 TRIG request */ +#define LL_DMAMUX_REQ_TIM3_UP 0x00000025U /*!< DMAMUX TIM3 UP request */ +#if defined(TIM6) +#define LL_DMAMUX_REQ_TIM6_UP 0x00000026U /*!< DMAMUX TIM6 UP request */ +#endif +#if defined(TIM7) +#define LL_DMAMUX_REQ_TIM7_UP 0x00000027U /*!< DMAMUX TIM7 UP request */ +#endif +#if defined(TIM15) +#define LL_DMAMUX_REQ_TIM15_CH1 0x00000028U /*!< DMAMUX TIM15 CH1 request */ +#define LL_DMAMUX_REQ_TIM15_CH2 0x00000029U /*!< DMAMUX TIM15 CH2 request */ +#define LL_DMAMUX_REQ_TIM15_TRIG_COM 0x0000002AU /*!< DMAMUX TIM15 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM15_UP 0x0000002BU /*!< DMAMUX TIM15 UP request */ +#endif +#define LL_DMAMUX_REQ_TIM16_CH1 0x0000002CU /*!< DMAMUX TIM16 CH1 request */ +#define LL_DMAMUX_REQ_TIM16_COM 0x0000002DU /*!< DMAMUX TIM16 COM request */ +#define LL_DMAMUX_REQ_TIM16_UP 0x0000002EU /*!< DMAMUX TIM16 UP request */ +#define LL_DMAMUX_REQ_TIM17_CH1 0x0000002FU /*!< DMAMUX TIM17 CH1 request */ +#define LL_DMAMUX_REQ_TIM17_COM 0x00000030U /*!< DMAMUX TIM17 COM request */ +#define LL_DMAMUX_REQ_TIM17_UP 0x00000031U /*!< DMAMUX TIM17 UP request */ +#define LL_DMAMUX_REQ_USART1_RX 0x00000032U /*!< DMAMUX USART1 RX request */ +#define LL_DMAMUX_REQ_USART1_TX 0x00000033U /*!< DMAMUX USART1 TX request */ +#define LL_DMAMUX_REQ_USART2_RX 0x00000034U /*!< DMAMUX USART2 RX request */ +#define LL_DMAMUX_REQ_USART2_TX 0x00000035U /*!< DMAMUX USART2 TX request */ +#if defined(USART3) +#define LL_DMAMUX_REQ_USART3_RX 0x00000036U /*!< DMAMUX USART3 RX request */ +#define LL_DMAMUX_REQ_USART3_TX 0x00000037U /*!< DMAMUX USART3 TX request */ +#endif +#if defined(USART4) +#define LL_DMAMUX_REQ_USART4_RX 0x00000038U /*!< DMAMUX USART4 RX request */ +#define LL_DMAMUX_REQ_USART4_TX 0x00000039U /*!< DMAMUX USART4 TX request */ +#endif +#if defined(UCPD1) +#define LL_DMAMUX_REQ_UCPD1_RX 0x0000003AU /*!< DMAMUX UCPD1 RX request */ +#define LL_DMAMUX_REQ_UCPD1_TX 0x0000003BU /*!< DMAMUX UCPD1 TX request */ +#endif +#if defined(UCPD2) +#define LL_DMAMUX_REQ_UCPD2_RX 0x0000003CU /*!< DMAMUX UCPD2 RX request */ +#define LL_DMAMUX_REQ_UCPD2_TX 0x0000003DU /*!< DMAMUX UCPD2 TX request */ +#endif + +#if defined(I2C3) +#define LL_DMAMUX_REQ_I2C3_RX 0x0000003EU /*!< DMAMUX I2C3 RX request */ +#define LL_DMAMUX_REQ_I2C3_TX 0x0000003FU /*!< DMAMUX I2C3 TX request */ +#endif + +#if defined(LPUART2) +#define LL_DMAMUX_REQ_LPUART2_RX 0x00000040U /*!< DMAMUX LPUART2 RX request */ +#define LL_DMAMUX_REQ_LPUART2_TX 0x00000041U /*!< DMAMUX LPUART2 TX request */ +#endif + +#if defined(SPI3) +#define LL_DMAMUX_REQ_SPI3_RX 0x00000042U /*!< DMAMUX SPI3 RX request */ +#define LL_DMAMUX_REQ_SPI3_TX 0x00000043U /*!< DMAMUX SPI3 TX request */ +#endif + +#if defined(TIM4) +#define LL_DMAMUX_REQ_TIM4_CH1 0x00000044U /*!< DMAMUX TIM4 CH1 request */ +#define LL_DMAMUX_REQ_TIM4_CH2 0x00000045U /*!< DMAMUX TIM4 CH2 request */ +#define LL_DMAMUX_REQ_TIM4_CH3 0x00000046U /*!< DMAMUX TIM4 CH3 request */ +#define LL_DMAMUX_REQ_TIM4_CH4 0x00000047U /*!< DMAMUX TIM4 CH4 request */ +#define LL_DMAMUX_REQ_TIM4_TRIG 0x00000048U /*!< DMAMUX TIM4 TRIG request */ +#define LL_DMAMUX_REQ_TIM4_UP 0x00000049U /*!< DMAMUX TIM4 UP request */ +#endif + +#if defined(USART5) +#define LL_DMAMUX_REQ_USART5_RX 0x0000004AU /*!< DMAMUX USART5 RX request */ +#define LL_DMAMUX_REQ_USART5_TX 0x0000004BU /*!< DMAMUX USART5 TX request */ +#endif + +#if defined(USART6) +#define LL_DMAMUX_REQ_USART6_RX 0x0000004CU /*!< DMAMUX USART6 RX request */ +#define LL_DMAMUX_REQ_USART6_TX 0x0000004DU /*!< DMAMUX USART6 TX request */ +#endif + +#if defined(STM32G0C1xx)||defined(STM32G0B1xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART6_TX +#elif defined(STM32G0B0xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART4_TX +#elif defined(STM32G081xx)||defined(STM32G071xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_UCPD2_TX +#elif defined(STM32G070xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART4_TX +#else +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART2_TX +#endif +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX Channel 0 connected to DMA1 Channel 1 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX Channel 1 connected to DMA1 Channel 2 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX Channel 2 connected to DMA1 Channel 3 */ +#define LL_DMAMUX_CHANNEL_3 0x00000003U /*!< DMAMUX Channel 3 connected to DMA1 Channel 4 */ +#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX Channel 4 connected to DMA1 Channel 5 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX Channel 5 connected to DMA1 Channel 6 */ +#endif +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX Channel 6 connected to DMA1 Channel 7 */ +#endif +#if defined(DMA2) +#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX Channel 7 connected to DMA2 Channel 1 */ +#define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX Channel 8 connected to DMA2 Channel 2 */ +#define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX Channel 9 connected to DMA2 Channel 3 */ +#define LL_DMAMUX_CHANNEL_10 0x0000000AU /*!< DMAMUX Channel 10 connected to DMA2 Channel 4 */ +#define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX Channel 11 connected to DMA2 Channel 5 */ +#endif +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_NO Synchronization Signal Polarity + * @{ + */ +#define LL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< All requests are blocked */ +#define LL_DMAMUX_SYNC_POL_RISING DMAMUX_CxCR_SPOL_0 /*!< Synchronization on event on rising edge */ +#define LL_DMAMUX_SYNC_POL_FALLING DMAMUX_CxCR_SPOL_1 /*!< Synchronization on event on falling edge */ +#define LL_DMAMUX_SYNC_POL_RISING_FALLING (DMAMUX_CxCR_SPOL_0 | DMAMUX_CxCR_SPOL_1) /*!< Synchronization on event on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_EVT Synchronization Signal Event + * @{ + */ +#define LL_DMAMUX_SYNC_EXTI_LINE0 0x00000000U /*!< Synchronization signal from EXTI Line0 */ +#define LL_DMAMUX_SYNC_EXTI_LINE1 DMAMUX_CxCR_SYNC_ID_0 /*!< Synchronization signal from EXTI Line1 */ +#define LL_DMAMUX_SYNC_EXTI_LINE2 DMAMUX_CxCR_SYNC_ID_1 /*!< Synchronization signal from EXTI Line2 */ +#define LL_DMAMUX_SYNC_EXTI_LINE3 (DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE4 DMAMUX_CxCR_SYNC_ID_2 /*!< Synchronization signal from EXTI Line4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE5 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line5 */ +#define LL_DMAMUX_SYNC_EXTI_LINE6 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line6 */ +#define LL_DMAMUX_SYNC_EXTI_LINE7 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line7 */ +#define LL_DMAMUX_SYNC_EXTI_LINE8 DMAMUX_CxCR_SYNC_ID_3 /*!< Synchronization signal from EXTI Line8 */ +#define LL_DMAMUX_SYNC_EXTI_LINE9 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line9 */ +#define LL_DMAMUX_SYNC_EXTI_LINE10 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line10 */ +#define LL_DMAMUX_SYNC_EXTI_LINE11 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line11 */ +#define LL_DMAMUX_SYNC_EXTI_LINE12 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from EXTI Line12 */ +#define LL_DMAMUX_SYNC_EXTI_LINE13 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE14 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line1 4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE15 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 5 */ +#define LL_DMAMUX_SYNC_DMAMUX_CH0 DMAMUX_CxCR_SYNC_ID_4 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH1 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel1 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH2 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from DMAMUX channel2 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH3 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define LL_DMAMUX_SYNC_LPTIM1_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define LL_DMAMUX_SYNC_LPTIM2_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from LPTIM2 Output */ +#endif +#define LL_DMAMUX_SYNC_TIM14_OC (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from TIM14 OC */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GENERATOR Request Generator Channel + * @{ + */ +#define LL_DMAMUX_REQ_GEN_0 0x00000000U +#define LL_DMAMUX_REQ_GEN_1 0x00000001U +#define LL_DMAMUX_REQ_GEN_2 0x00000002U +#define LL_DMAMUX_REQ_GEN_3 0x00000003U +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN_POLARITY External Request Signal Generation Polarity + * @{ + */ +#define LL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< No external DMA request generation */ +#define LL_DMAMUX_REQ_GEN_POL_RISING DMAMUX_RGxCR_GPOL_0 /*!< External DMA request generation on event on rising edge */ +#define LL_DMAMUX_REQ_GEN_POL_FALLING DMAMUX_RGxCR_GPOL_1 /*!< External DMA request generation on event on falling edge */ +#define LL_DMAMUX_REQ_GEN_POL_RISING_FALLING (DMAMUX_RGxCR_GPOL_0 | DMAMUX_RGxCR_GPOL_1) /*!< External DMA request generation on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN External Request Signal Generation + * @{ + */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE0 0x00000000U /*!< Request signal generation from EXTI Line0 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE1 DMAMUX_RGxCR_SIG_ID_0 /*!< Request signal generation from EXTI Line1 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE2 DMAMUX_RGxCR_SIG_ID_1 /*!< Request signal generation from EXTI Line2 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE3 (DMAMUX_RGxCR_SIG_ID_1 |DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line3 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE4 DMAMUX_RGxCR_SIG_ID_2 /*!< Request signal generation from EXTI Line4 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE5 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line5 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE6 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line6 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE7 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line7 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE8 DMAMUX_RGxCR_SIG_ID_3 /*!< Request signal generation from EXTI Line8 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE9 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line9 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE10 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line10 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE11 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line11 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE12 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from EXTI Line12 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE13 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line13 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE14 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line14 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE15 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line15 */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH0 DMAMUX_RGxCR_SIG_ID_4 /*!< Request signal generation from DMAMUX channel0 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH1 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel1 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH2 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from DMAMUX channel2 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH3 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define LL_DMAMUX_REQ_GEN_LPTIM1_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from LPTIM1 Output */ +#endif +#if defined(LPTIM2) +#define LL_DMAMUX_REQ_GEN_LPTIM2_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from LPTIM2 Output */ +#endif +#define LL_DMAMUX_REQ_GEN_TIM14_OC (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from TIM14 OC */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR NBREQ LL_DMAMUX_SetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ, ((RequestNb - 1U) << DMAMUX_CxCR_NBREQ_Pos)); +} + +/** + * @brief Get the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR NBREQ LL_DMAMUX_GetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ)) >> DMAMUX_CxCR_NBREQ_Pos) + 1U); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is synchronized. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SPOL LL_DMAMUX_SetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is synchronized. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SPOL LL_DMAMUX_GetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL)); +} + +/** + * @brief Enable the Event Generation on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_EnableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Disable the Event Generation on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_DisableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Check if the Event Generation on DMAMUX channel x is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_IsEnabledEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the synchronization mode. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_EnableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Disable the synchronization mode. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_DisableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Check if the synchronization mode is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_IsEnabledSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL); +} + +/** + * @brief Set DMAMUX synchronization ID on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SYNC_ID LL_DMAMUX_SetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param SyncID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t SyncID) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID, SyncID); +} + +/** + * @brief Get DMAMUX synchronization ID on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SYNC_ID LL_DMAMUX_GetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID)); +} + +/** + * @brief Enable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_EnableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Disable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_DisableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Check if the Request Generator is enabled or disabled. + * @rmtoll RGxCR GE LL_DMAMUX_IsEnabledRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_SetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_GetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a generation event. + * @note This field can only be written when Generator is disabled. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_SetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ, (RequestNb - 1U) << DMAMUX_RGxCR_GNBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a generation event. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_GetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ) >> DMAMUX_RGxCR_GNBREQ_Pos) + 1U); +} + +/** + * @brief Set DMAMUX external Request Signal ID on DMAMUX Request Generation Trigger Event Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_SetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestSignalID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestSignalID) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID, RequestSignalID); +} + +/** + * @brief Get DMAMUX external Request Signal ID set on DMAMUX Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_GetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID)); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Synchronization Event Overrun Flag Channel 0. + * @rmtoll CSR SOF0 LL_DMAMUX_IsActiveFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF0) == (DMAMUX_CSR_SOF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 1. + * @rmtoll CSR SOF1 LL_DMAMUX_IsActiveFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF1) == (DMAMUX_CSR_SOF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 2. + * @rmtoll CSR SOF2 LL_DMAMUX_IsActiveFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF2) == (DMAMUX_CSR_SOF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 3. + * @rmtoll CSR SOF3 LL_DMAMUX_IsActiveFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF3) == (DMAMUX_CSR_SOF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 4. + * @rmtoll CSR SOF4 LL_DMAMUX_IsActiveFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF4) == (DMAMUX_CSR_SOF4)) ? 1UL : 0UL); +} + +#if defined(DMAMUX1_Channel5) +/** + * @brief Get Synchronization Event Overrun Flag Channel 5. + * @rmtoll CSR SOF5 LL_DMAMUX_IsActiveFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF5) == (DMAMUX_CSR_SOF5)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel6) +/** + * @brief Get Synchronization Event Overrun Flag Channel 6. + * @rmtoll CSR SOF6 LL_DMAMUX_IsActiveFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF6) == (DMAMUX_CSR_SOF6)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel7) +/** + * @brief Get Synchronization Event Overrun Flag Channel 7. + * @rmtoll CSR SOF7 LL_DMAMUX_IsActiveFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF7) == (DMAMUX_CSR_SOF7)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel8) +/** + * @brief Get Synchronization Event Overrun Flag Channel 8. + * @rmtoll CSR SOF8 LL_DMAMUX_IsActiveFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF8) == (DMAMUX_CSR_SOF8)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel9) +/** + * @brief Get Synchronization Event Overrun Flag Channel 9. + * @rmtoll CSR SOF9 LL_DMAMUX_IsActiveFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF9) == (DMAMUX_CSR_SOF9)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel10) +/** + * @brief Get Synchronization Event Overrun Flag Channel 10. + * @rmtoll CSR SOF10 LL_DMAMUX_IsActiveFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF10) == (DMAMUX_CSR_SOF10)) ? 1UL : 0UL); +} + +#endif +#if defined(DMAMUX1_Channel11) +/** + * @brief Get Synchronization Event Overrun Flag Channel 11. + * @rmtoll CSR SOF11 LL_DMAMUX_IsActiveFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF11) == (DMAMUX_CSR_SOF11)) ? 1UL : 0UL); +} + +#endif +/** + * @brief Get Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF0) == (DMAMUX_RGSR_OF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGSR OF1 LL_DMAMUX_IsActiveFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF1) == (DMAMUX_RGSR_OF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGSR OF2 LL_DMAMUX_IsActiveFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF2) == (DMAMUX_RGSR_OF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGSR OF3 LL_DMAMUX_IsActiveFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF3) == (DMAMUX_RGSR_OF3)) ? 1UL : 0UL); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 0. + * @rmtoll CFR CSOF0 LL_DMAMUX_ClearFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF0); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 1. + * @rmtoll CFR CSOF1 LL_DMAMUX_ClearFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF1); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 2. + * @rmtoll CFR CSOF2 LL_DMAMUX_ClearFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF2); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 3. + * @rmtoll CFR CSOF3 LL_DMAMUX_ClearFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF3); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 4. + * @rmtoll CFR CSOF4 LL_DMAMUX_ClearFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF4); +} + +#if defined(DMAMUX1_Channel5) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 5. + * @rmtoll CFR CSOF5 LL_DMAMUX_ClearFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF5); +} + +#endif +#if defined(DMAMUX1_Channel6) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 6. + * @rmtoll CFR CSOF6 LL_DMAMUX_ClearFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF6); +} + +#endif +#if defined(DMAMUX1_Channel7) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 7. + * @rmtoll CFR CSOF7 LL_DMAMUX_ClearFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF7); +} + +#endif +#if defined(DMAMUX1_Channel8) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 8. + * @rmtoll CFR CSOF8 LL_DMAMUX_ClearFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF8); +} + +#endif +#if defined(DMAMUX1_Channel9) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 9. + * @rmtoll CFR CSOF9 LL_DMAMUX_ClearFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF9); +} + +#endif +#if defined(DMAMUX1_Channel10) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 10. + * @rmtoll CFR CSOF10 LL_DMAMUX_ClearFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF10); +} + +#endif +#if defined(DMAMUX1_Channel11) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 11. + * @rmtoll CFR CSOF11 LL_DMAMUX_ClearFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF11); +} + +#endif +/** + * @brief Clear Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF0); +} + +/** + * @brief Clear Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF1 LL_DMAMUX_ClearFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF1); +} + +/** + * @brief Clear Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF2 LL_DMAMUX_ClearFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF2); +} + +/** + * @brief Clear Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF3 LL_DMAMUX_ClearFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF3); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_EnableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Disable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_DisableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Check if the Synchronization Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_IsEnabledIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE)) == (DMAMUX_CxCR_SOIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_EnableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Disable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_DisableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Check if the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll RGxCR OIE LL_DMAMUX_IsEnabledIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_DMAMUX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_exti.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_exti.h new file mode 100644 index 0000000..90475fa --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_exti.h @@ -0,0 +1,1559 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_EXTI_H +#define STM32G0xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +#define LL_EXTI_REGISTER_PINPOS_SHFT 16u /*!< Define used to shift pin position in EXTICR register */ + +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ +#endif + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */ +#if defined(EXTI_IMR1_IM16) +#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */ +#endif +#if defined(EXTI_IMR1_IM17) +#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ +#endif +#if defined(EXTI_IMR1_IM18) +#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ +#endif +#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#if defined(EXTI_IMR1_IM20) +#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ +#endif +#if defined(EXTI_IMR1_IM21) +#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */ +#endif +#if defined(EXTI_IMR1_IM22) +#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */ +#endif +#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#if defined(EXTI_IMR1_IM24) +#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ +#endif +#if defined(EXTI_IMR1_IM25) +#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ +#endif +#if defined(EXTI_IMR1_IM26) +#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */ +#endif +#if defined(EXTI_IMR1_IM27) +#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */ +#endif +#if defined(EXTI_IMR1_IM28) +#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */ +#endif +#if defined(EXTI_IMR1_IM29) +#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ +#endif +#if defined(EXTI_IMR1_IM30) +#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ +#endif +#if defined(EXTI_IMR1_IM31) +#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ +#endif +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/ + +#if defined(EXTI_IMR2_IM32) +#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */ +#endif +#if defined(EXTI_IMR2_IM33) +#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */ +#endif +#if defined(EXTI_IMR2_IM34) +#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */ +#endif +#if defined(EXTI_IMR2_IM35) +#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */ +#endif +#if defined(EXTI_IMR2_IM36) +#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */ +#endif +#if defined(EXTI_IMR2_IM32) || defined(EXTI_IMR2_IM33) || defined(EXTI_IMR2_IM34) || defined(EXTI_IMR2_IM35) || defined(EXTI_IMR2_IM36) +#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/ +#endif + +#define LL_EXTI_LINE_ALL 0xFFFFFFFFU /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE 0x00000000U /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup EXTI_LL_EC_CONFIG_PORT EXTI CONFIG PORT + * @{ + */ +#define LL_EXTI_CONFIG_PORTA 0U /*!< EXTI PORT A */ +#define LL_EXTI_CONFIG_PORTB EXTI_EXTICR1_EXTI0_0 /*!< EXTI PORT B */ +#define LL_EXTI_CONFIG_PORTC EXTI_EXTICR1_EXTI0_1 /*!< EXTI PORT C */ +#if defined(GPIOD_BASE) +#define LL_EXTI_CONFIG_PORTD (EXTI_EXTICR1_EXTI0_1|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT D */ +#endif /*GPIOD_BASE*/ +#if defined(GPIOE_BASE) +#define LL_EXTI_CONFIG_PORTE EXTI_EXTICR1_EXTI0_2 /*!< EXTI PORT E */ +#endif /*GPIOE_BASE*/ +#define LL_EXTI_CONFIG_PORTF (EXTI_EXTICR1_EXTI0_2|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT F */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_CONFIG_LINE EXTI CONFIG LINE + * @{ + */ +#define LL_EXTI_CONFIG_LINE0 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE1 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE2 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_16 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE3 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_24 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE4 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE5 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE6 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_16 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE7 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_24 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE8 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE9 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE10 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_16 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE11 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_24 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE12 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE13 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE14 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_16 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE15 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_24 | EXTICR[3] */ +/** + * @} + */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR1, ExtiLine); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines 32 & 33) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR2, ExtiLine); +} +#endif + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR1, ExtiLine); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines 32 & 33) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR2, ExtiLine); +} +#endif + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines 32 & 33) + * is set to 1 in order to enable the interrupt by default. + * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR1, ExtiLine); + +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR2, ExtiLine); +} +#endif +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR1, ExtiLine); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR2, ExtiLine); +} +#endif +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR1, ExtiLine); + +} +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR2, ExtiLine); + +} +#endif + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR1, ExtiLine); + +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR2, ExtiLine); + +} +#endif + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR2, ExtiLine); +} +#endif + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR2, ExtiLine); +} +#endif + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Generate a software Interrupt Event for Lines in range 32 to 63 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER2, ExtiLine); +} +#endif + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Falling Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_IsActiveFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFallingFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if the ExtLine Falling Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR2 FPIFx LL_EXTI_IsActiveFallingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFallingFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Read ExtLine Combination Falling Flag for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_ReadFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFallingFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FPR1, ExtiLine)); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Read ExtLine Combination Falling Flag for Lines in range 32 to 63 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR2 FPIFx LL_EXTI_ReadFallingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFallingFlag_32_63(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FPR2, ExtiLine)); +} +#endif + +/** + * @brief Clear ExtLine Falling Flags for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_ClearFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFallingFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->FPR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Clear ExtLine Falling Flags for Lines in range 32 to 63 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR2 FPIFx LL_EXTI_ClearFallingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFallingFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->FPR2, ExtiLine); +} +#endif + +/** + * @brief Check if the ExtLine Rising Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_IsActiveRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveRisingFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if the ExtLine Rising Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR2 RPIFx LL_EXTI_IsActiveRisingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveRisingFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Read ExtLine Combination Rising Flag for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_ReadRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadRisingFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RPR1, ExtiLine)); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Read ExtLine Combination Rising Flag for Lines in range 32 to 63 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR2 RPIFx LL_EXTI_ReadRisingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadRisingFlag_32_63(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RPR2, ExtiLine)); +} +#endif + +/** + * @brief Clear ExtLine Rising Flags for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_ClearRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearRisingFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->RPR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Clear ExtLine Rising Flags for Lines in range 32 to 63 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR2 RPIFx LL_EXTI_ClearRisingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearRisingFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->RPR2, ExtiLine); +} +#endif + +/** + * @} + */ +/** @defgroup EXTI_LL_EF_Config EF configuration functions + * @{ + */ + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI1 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI2 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI3 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI4 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI5 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI6 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI7 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI8 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI9 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI10 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI11 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI12 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI13 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI14 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI15 LL_EXTI_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref EXTI_LL_EC_CONFIG_PORT + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_EXTI_CONFIG_LINE0 + * @arg @ref LL_EXTI_CONFIG_LINE1 + * @arg @ref LL_EXTI_CONFIG_LINE2 + * @arg @ref LL_EXTI_CONFIG_LINE3 + * @arg @ref LL_EXTI_CONFIG_LINE4 + * @arg @ref LL_EXTI_CONFIG_LINE5 + * @arg @ref LL_EXTI_CONFIG_LINE6 + * @arg @ref LL_EXTI_CONFIG_LINE7 + * @arg @ref LL_EXTI_CONFIG_LINE8 + * @arg @ref LL_EXTI_CONFIG_LINE9 + * @arg @ref LL_EXTI_CONFIG_LINE10 + * @arg @ref LL_EXTI_CONFIG_LINE11 + * @arg @ref LL_EXTI_CONFIG_LINE12 + * @arg @ref LL_EXTI_CONFIG_LINE13 + * @arg @ref LL_EXTI_CONFIG_LINE14 + * @arg @ref LL_EXTI_CONFIG_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(EXTI->EXTICR[Line & 0x03u], EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT), Port << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI1 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI2 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI3 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI4 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI5 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI6 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI7 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI8 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI9 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI10 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI11 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI12 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI13 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI14 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI15 LL_EXTI_SetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_EXTI_CONFIG_LINE0 + * @arg @ref LL_EXTI_CONFIG_LINE1 + * @arg @ref LL_EXTI_CONFIG_LINE2 + * @arg @ref LL_EXTI_CONFIG_LINE3 + * @arg @ref LL_EXTI_CONFIG_LINE4 + * @arg @ref LL_EXTI_CONFIG_LINE5 + * @arg @ref LL_EXTI_CONFIG_LINE6 + * @arg @ref LL_EXTI_CONFIG_LINE7 + * @arg @ref LL_EXTI_CONFIG_LINE8 + * @arg @ref LL_EXTI_CONFIG_LINE9 + * @arg @ref LL_EXTI_CONFIG_LINE10 + * @arg @ref LL_EXTI_CONFIG_LINE11 + * @arg @ref LL_EXTI_CONFIG_LINE12 + * @arg @ref LL_EXTI_CONFIG_LINE13 + * @arg @ref LL_EXTI_CONFIG_LINE14 + * @arg @ref LL_EXTI_CONFIG_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref EXTI_LL_EC_CONFIG_PORT + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_EXTI_GetEXTISource(uint32_t Line) +{ + return (READ_BIT(EXTI->EXTICR[Line & 0x03u], (EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT))) >> (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +uint32_t LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_EXTI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_gpio.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_gpio.h new file mode 100644 index 0000000..f95ad2f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_gpio.h @@ -0,0 +1,960 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_GPIO_H +#define STM32G0xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) + +/** @defgroup GPIO_LL GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..] + * which may be out of array bounds [..,UNKNOWN] in following APIs: + * LL_GPIO_GetAFPin_0_7 + * LL_GPIO_SetAFPin_0_7 + * LL_GPIO_SetAFPin_8_15 + * LL_GPIO_GetAFPin_8_15 + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ +#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW +#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM +#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH +#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH + + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0), ((Pin * Pin) * Mode)); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0), ((Pin * Pin) * Speed)); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0), ((Pin * Pin) * Pull)); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0), + ((((Pin * Pin) * Pin) * Pin) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8), + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) * + (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U))); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, PinMask); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_GPIO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_i2c.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_i2c.h new file mode 100644 index 0000000..e8281f2 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_i2c.h @@ -0,0 +1,2228 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_I2C_H +#define STM32G0xx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) || defined (I2C3) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE. + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */ + + uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. + This parameter must be set by referring to the STM32CubeMX Tool and + the helper macro @ref __LL_I2C_CONVERT_TIMINGS(). + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetTiming(). */ + + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION. + + This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE. + + This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1. + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_I2C_WriteReg function + * @{ + */ +#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */ +#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */ +#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */ +#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */ +#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */ +#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */ +#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */ +#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */ +#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */ +#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */ +#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */ +#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */ +#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */ +#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */ +#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */ +#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */ +#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */ +#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */ +#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ +#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */ +#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */ +#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ +#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ +#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ +#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ +#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode + * @{ + */ +#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ +#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks + * @{ + */ +#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ +#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. All Address2 are acknowledged.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length + * @{ + */ +#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ +#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction + * @{ + */ +#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ +#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_MODE Transfer End Mode + * @{ + */ +#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */ +#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode with no HW PEC comparison. */ +#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode with no HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) /*!< Enable SMBUS Software end mode with HW PEC comparison. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation + * @{ + */ +#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U /*!< Don't Generate Stop and Start condition. */ +#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) /*!< Generate Stop condition (Size should be set to 0). */ +#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) /*!< Generate Start for read request. */ +#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Start for write request. */ +#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) /*!< Generate Restart for read request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Restart for write request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) /*!< Generate Restart for read request, slave 10Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Restart for write request, slave 10Bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, slave enters receiver mode. */ +#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, slave enters transmitter mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect SCL low level timeout. */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect both SCL and SDA high level timeout.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ +#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) enable bit */ +#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB (extended clock) enable bits */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings + * @{ + */ +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @param __DATA_SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tscldel = (SCLDEL+1)xtpresc) + * @param __DATA_HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tsdadel = SDADELxtpresc) + * @param __CLOCK_HIGH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. (tsclh = (SCLH+1)xtpresc) + * @param __CLOCK_LOW_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. (tscll = (SCLL+1)xtpresc) + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __DATA_SETUP_TIME__, __DATA_HOLD_TIME__, __CLOCK_HIGH_PERIOD__, __CLOCK_LOW_PERIOD__) \ + ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \ + (((uint32_t)(__DATA_SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \ + (((uint32_t)(__DATA_HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \ + (((uint32_t)(__CLOCK_HIGH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \ + (((uint32_t)(__CLOCK_LOW_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @note When PE = 0, the I2C SCL and SDA lines are released. + * Internal state machines and status bits are put back to their reset value. + * When cleared, PE must be kept low for at least 3 APB clock cycles. + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL); +} + +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n + * CR1 DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos)); +} + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos); +} + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n + * RXDR RXDATA LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(I2C_TypeDef *I2Cx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT) + { + /* return address of TXDR register */ + data_reg_addr = (uint32_t) & (I2Cx->TXDR); + } + else + { + /* return address of RXDR register */ + data_reg_addr = (uint32_t) & (I2Cx->RXDR); + } + + return data_reg_addr; +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL); +} + +/** + * @brief Enable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Disable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Check if hardware byte control in slave mode is enabled or disabled. + * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL); +} + +/** + * @brief Enable Wakeup from STOP. + * @note Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when Digital Filter is disabled. + * @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Disable Wakeup from STOP. + * @note Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Check if Wakeup from STOP is enabled or disabled. + * @note Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_WUPEN) == (I2C_CR1_WUPEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. + * @note Changing this bit is not allowed, when the START bit is set. + * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode + * @param I2Cx I2C Instance. + * @param AddressingMode This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode); +} + +/** + * @brief Get the Master addressing mode. + * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + */ +__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n + * OAR1 OA1MODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Enable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Disable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n + * OAR2 OA2MSK LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. + * @param OwnAddrMask This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS2_NOMASK + * @arg @ref LL_I2C_OWNADDRESS2_MASK01 + * @arg @ref LL_I2C_OWNADDRESS2_MASK02 + * @arg @ref LL_I2C_OWNADDRESS2_MASK03 + * @arg @ref LL_I2C_OWNADDRESS2_MASK04 + * @arg @ref LL_I2C_OWNADDRESS2_MASK05 + * @arg @ref LL_I2C_OWNADDRESS2_MASK06 + * @arg @ref LL_I2C_OWNADDRESS2_MASK07 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming + * @param I2Cx I2C Instance. + * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @note This parameter is computed with the STM32CubeMX Tool. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing) +{ + WRITE_REG(I2Cx->TIMINGR, Timing); +} + +/** + * @brief Get the Timing Prescaler setting. + * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos); +} + +/** + * @brief Get the SCL low period setting. + * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos); +} + +/** + * @brief Get the SCL high period setting. + * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos); +} + +/** + * @brief Get the SDA hold time. + * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos); +} + +/** + * @brief Get the SDA setup time. + * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos); +} + +/** + * @brief Configure peripheral mode. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n + * CR1 SMBDEN LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n + * CR1 SMBDEN LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SMBus Clock Timeout. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @param TimeoutB + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, + uint32_t TimeoutB) +{ + MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB, + TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos)); +} + +/** + * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutA); +} + +/** + * @brief Get the SMBus Clock TimeoutA setting. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA)); +} + +/** + * @brief Set the SMBus Clock TimeoutA mode. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode); +} + +/** + * @brief Get the SMBus Clock TimeoutA mode. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE)); +} + +/** + * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutB is disabled. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Enable the SMBus Clock Timeout. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + SET_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Disable the SMBus Clock Timeout. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Check if the SMBus Clock Timeout is enabled or disabled. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == (ClockTimeout)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Disable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Check if the TXIS Interrupt is enabled or disabled. + * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Disable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Check if Address match interrupt is enabled or disabled. + * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Disable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Check if Not acknowledge received interrupt is enabled or disabled. + * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Disable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Check if STOP detection interrupt is enabled or disabled. + * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Disable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Check if Transfer Complete interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupts. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Disable Error interrupts. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transmit interrupt flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the received slave address matched with one of the enabled slave address. + * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Not Acknowledge received flag. + * @note RESET: Clear default value. + * SET: When a NACK is received after a byte transmission. + * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Stop detection flag. + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. + * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=1 and NBYTES date have been transferred. + * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag (slave mode). + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When the received PEC does not match with the PEC register content. + * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When a timeout or extended clock timeout occurs. + * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When SMBus host configuration, SMBus alert enabled and + * a falling edge event occurs on SMBA pin. + * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear Address Matched flag. + * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF); +} + +/** + * @brief Clear Not Acknowledge flag. + * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF); +} + +/** + * @brief Clear Stop detection flag. + * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF); +} + +/** + * @brief Clear Transmit data register empty flag (TXE). + * @note This bit can be clear by software in order to flush the transmit data register (TXDR). + * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx) +{ + WRITE_REG(I2Cx->ISR, I2C_ISR_TXE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF); +} + +/** + * @brief Clear SMBus PEC error flag. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_PECCF); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF); +} + +/** + * @brief Clear SMBus Alert flag. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable automatic STOP condition generation (master mode). + * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. + * This bit has no effect in slave mode or when RELOAD bit is set. + * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Disable automatic STOP condition generation (master mode). + * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. + * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Check if automatic STOP condition is enabled or disabled. + * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL); +} + +/** + * @brief Enable reload mode (master mode). + * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. + * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Disable reload mode (master mode). + * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). + * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Check if reload mode is enabled or disabled. + * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Configure the number of bytes for transfer. + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize + * @param I2Cx I2C Instance. + * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Get the number of bytes configured for transfer. + * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. + * @note Usage in Slave mode only. + * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR2 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_STOP); +} + +/** + * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master sends the complete 10bit slave address read sequence : + * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master only sends the first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. + * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL); +} + +/** + * @brief Configure the transfer direction (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest + * @param I2Cx I2C Instance. + * @param TransferRequest This parameter can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest); +} + +/** + * @brief Get the transfer direction requested (master mode). + * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN)); +} + +/** + * @brief Configure the slave address for transfer (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr + * @param I2Cx I2C Instance. + * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr); +} + +/** + * @brief Get the slave address programmed for transfer. + * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD)); +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n + * CR2 ADD10 LL_I2C_HandleTransfer\n + * CR2 RD_WRN LL_I2C_HandleTransfer\n + * CR2 START LL_I2C_HandleTransfer\n + * CR2 STOP LL_I2C_HandleTransfer\n + * CR2 RELOAD LL_I2C_HandleTransfer\n + * CR2 NBYTES LL_I2C_HandleTransfer\n + * CR2 AUTOEND LL_I2C_HandleTransfer\n + * CR2 HEAD10R LL_I2C_HandleTransfer + * @param I2Cx I2C Instance. + * @param SlaveAddr Specifies the slave address to be programmed. + * @param SlaveAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRSLAVE_7BIT + * @arg @ref LL_I2C_ADDRSLAVE_10BIT + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=255. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_RELOAD + * @arg @ref LL_I2C_MODE_AUTOEND + * @arg @ref LL_I2C_MODE_SOFTEND + * @arg @ref LL_I2C_MODE_SMBUS_RELOAD + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC + * @param Request This parameter can be one of the following values: + * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP + * @arg @ref LL_I2C_GENERATE_STOP + * @arg @ref LL_I2C_GENERATE_START_READ + * @arg @ref LL_I2C_GENERATE_START_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE + * @retval None + */ +__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, + uint32_t TransferSize, uint32_t EndMode, uint32_t Request) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD | + I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R, + SlaveAddr | SlaveAddrSize | (TransferSize << I2C_CR2_NBYTES_Pos) | EndMode | Request); +} + +/** + * @brief Indicate the value of transfer direction (slave mode). + * @note RESET: Write transfer, Slave enters in receiver mode. + * SET: Read transfer, Slave enters in transmitter mode. + * @rmtoll ISR DIR LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR)); +} + +/** + * @brief Return the slave matched address. + * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1); +} + +/** + * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition or an Address Matched is received. + * This bit has no effect when RELOAD bit is set. + * This bit has no effect in device mode when SBC bit is not set. + * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE); +} + +/** + * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll PECR PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF +*/ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC)); +} + +/** + * @brief Read Receive Data register. + * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll TXDR TXDATA LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + WRITE_REG(I2Cx->TXDR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct); +ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 || I2C3 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_I2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_iwdg.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_iwdg.h new file mode 100644 index 0000000..8c3e7d6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_iwdg.h @@ -0,0 +1,342 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_IWDG_H +#define STM32G0xx_LL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(IWDG) + +/** @defgroup IWDG_LL IWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants + * @{ + */ +#define LL_IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */ +#define LL_IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */ +#define LL_IWDG_KEY_WR_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */ +#define LL_IWDG_KEY_WR_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_IWDG_ReadReg function + * @{ + */ +#define LL_IWDG_SR_PVU IWDG_SR_PVU /*!< Watchdog prescaler value update */ +#define LL_IWDG_SR_RVU IWDG_SR_RVU /*!< Watchdog counter reload value update */ +#define LL_IWDG_SR_WVU IWDG_SR_WVU /*!< Watchdog counter window value update */ +/** + * @} + */ + +/** @defgroup IWDG_LL_EC_PRESCALER Prescaler Divider + * @{ + */ +#define LL_IWDG_PRESCALER_4 0x00000000U /*!< Divider by 4 */ +#define LL_IWDG_PRESCALER_8 (IWDG_PR_PR_0) /*!< Divider by 8 */ +#define LL_IWDG_PRESCALER_16 (IWDG_PR_PR_1) /*!< Divider by 16 */ +#define LL_IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 32 */ +#define LL_IWDG_PRESCALER_64 (IWDG_PR_PR_2) /*!< Divider by 64 */ +#define LL_IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< Divider by 128 */ +#define LL_IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< Divider by 256 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions + * @{ + */ +/** @defgroup IWDG_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Start the Independent Watchdog + * @note Except if the hardware watchdog option is selected + * @rmtoll KR KEY LL_IWDG_Enable + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_ENABLE); +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * @rmtoll KR KEY LL_IWDG_ReloadCounter + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_RELOAD); +} + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_EnableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE); +} + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_DisableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE); +} + +/** + * @brief Select the prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_SetPrescaler + * @param IWDGx IWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler) +{ + WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler); +} + +/** + * @brief Get the selected prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_GetPrescaler + * @param IWDGx IWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + */ +__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->PR)); +} + +/** + * @brief Specify the IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_SetReloadCounter + * @param IWDGx IWDG Instance + * @param Counter Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter) +{ + WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter); +} + +/** + * @brief Get the specified IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_GetReloadCounter + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->RLR)); +} + +/** + * @brief Specify high limit of the window value to be compared to the down-counter. + * @rmtoll WINR WIN LL_IWDG_SetWindow + * @param IWDGx IWDG Instance + * @param Window Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetWindow(IWDG_TypeDef *IWDGx, uint32_t Window) +{ + WRITE_REG(IWDGx->WINR, IWDG_WINR_WIN & Window); +} + +/** + * @brief Get the high limit of the window value specified. + * @rmtoll WINR WIN LL_IWDG_GetWindow + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetWindow(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->WINR)); +} + +/** + * @} + */ + +/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if flag Prescaler Value Update is set or not + * @rmtoll SR PVU LL_IWDG_IsActiveFlag_PVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Reload Value Update is set or not + * @rmtoll SR RVU LL_IWDG_IsActiveFlag_RVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Window Value Update is set or not + * @rmtoll SR WVU LL_IWDG_IsActiveFlag_WVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_WVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_WVU) == (IWDG_SR_WVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if all flags Prescaler, Reload & Window Value Update are reset or not + * @rmtoll SR PVU LL_IWDG_IsReady\n + * SR WVU LL_IWDG_IsReady\n + * SR RVU LL_IWDG_IsReady + * @param IWDGx IWDG Instance + * @retval State of bits (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU | IWDG_SR_WVU) == 0U) ? 1UL : 0UL); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* IWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_IWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lptim.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lptim.h new file mode 100644 index 0000000..93c0c23 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lptim.h @@ -0,0 +1,1464 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_lptim.h + * @author MCD Application Team + * @brief Header file of LPTIM LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_LPTIM_H +#define STM32G0xx_LL_LPTIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (LPTIM1) || defined (LPTIM2) + +/** @defgroup LPTIM_LL LPTIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPTIM_LL_Private_Macros LPTIM Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPTIM_LL_ES_INIT LPTIM Exported Init structure + * @{ + */ + +/** + * @brief LPTIM Init structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< Specifies the source of the clock used by the LPTIM instance. + This parameter can be a value of @ref LPTIM_LL_EC_CLK_SOURCE. + + This feature can be modified afterwards using unitary function @ref LL_LPTIM_SetClockSource().*/ + + uint32_t Prescaler; /*!< Specifies the prescaler division ratio. + This parameter can be a value of @ref LPTIM_LL_EC_PRESCALER. + + This feature can be modified afterwards using using unitary function @ref LL_LPTIM_SetPrescaler().*/ + + uint32_t Waveform; /*!< Specifies the waveform shape. + This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_WAVEFORM. + + This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/ + + uint32_t Polarity; /*!< Specifies waveform polarity. + This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/ +} LL_LPTIM_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPTIM_LL_Exported_Constants LPTIM Exported Constants + * @{ + */ + +/** @defgroup LPTIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPTIM_ReadReg function + * @{ + */ +#define LL_LPTIM_ISR_CMPM LPTIM_ISR_CMPM /*!< Compare match */ +#define LL_LPTIM_ISR_ARRM LPTIM_ISR_ARRM /*!< Autoreload match */ +#define LL_LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG /*!< External trigger edge event */ +#define LL_LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK /*!< Compare register update OK */ +#define LL_LPTIM_ISR_ARROK LPTIM_ISR_ARROK /*!< Autoreload register update OK */ +#define LL_LPTIM_ISR_UP LPTIM_ISR_UP /*!< Counter direction change down to up */ +#define LL_LPTIM_ISR_DOWN LPTIM_ISR_DOWN /*!< Counter direction change up to down */ +/** + * @} + */ + +/** @defgroup LPTIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPTIM_ReadReg and LL_LPTIM_WriteReg functions + * @{ + */ +#define LL_LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE /*!< Compare match Interrupt Enable */ +#define LL_LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE /*!< Autoreload match Interrupt Enable */ +#define LL_LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE /*!< External trigger valid edge Interrupt Enable */ +#define LL_LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE /*!< Compare register update OK Interrupt Enable */ +#define LL_LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE /*!< Autoreload register update OK Interrupt Enable */ +#define LL_LPTIM_IER_UPIE LPTIM_IER_UPIE /*!< Direction change to UP Interrupt Enable */ +#define LL_LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE /*!< Direction change to down Interrupt Enable */ +/** + * @} + */ + +/** @defgroup LPTIM_LL_EC_OPERATING_MODE Operating Mode + * @{ + */ +#define LL_LPTIM_OPERATING_MODE_CONTINUOUS LPTIM_CR_CNTSTRT /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPTIM register + * @param __INSTANCE__ LPTIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPTIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPTIM_LL_Exported_Functions LPTIM Exported Functions + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPTIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx); +void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct); +ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, LL_LPTIM_InitTypeDef *LPTIM_InitStruct); +void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup LPTIM_LL_EF_LPTIM_Configuration LPTIM Configuration + * @{ + */ + +/** + * @brief Enable the LPTIM instance + * @note After setting the ENABLE bit, a delay of two counter clock is needed + * before the LPTIM instance is actually enabled. + * @rmtoll CR ENABLE LL_LPTIM_Enable + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_Enable(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CR, LPTIM_CR_ENABLE); +} + +/** + * @brief Indicates whether the LPTIM instance is enabled. + * @rmtoll CR ENABLE LL_LPTIM_IsEnabled + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabled(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CR, LPTIM_CR_ENABLE) == LPTIM_CR_ENABLE) ? 1UL : 0UL)); +} + +/** + * @brief Starts the LPTIM counter in the desired mode. + * @note LPTIM instance must be enabled before starting the counter. + * @note It is possible to change on the fly from One Shot mode to + * Continuous mode. + * @rmtoll CR CNTSTRT LL_LPTIM_StartCounter\n + * CR SNGSTRT LL_LPTIM_StartCounter + * @param LPTIMx Low-Power Timer instance + * @param OperatingMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OPERATING_MODE_CONTINUOUS + * @arg @ref LL_LPTIM_OPERATING_MODE_ONESHOT + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_StartCounter(LPTIM_TypeDef *LPTIMx, uint32_t OperatingMode) +{ + MODIFY_REG(LPTIMx->CR, LPTIM_CR_CNTSTRT | LPTIM_CR_SNGSTRT, OperatingMode); +} + +/** + * @brief Enable reset after read. + * @note After calling this function any read access to LPTIM_CNT + * register will asynchronously reset the LPTIM_CNT register content. + * @rmtoll CR RSTARE LL_LPTIM_EnableResetAfterRead + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableResetAfterRead(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CR, LPTIM_CR_RSTARE); +} + +/** + * @brief Disable reset after read. + * @rmtoll CR RSTARE LL_LPTIM_DisableResetAfterRead + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableResetAfterRead(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CR, LPTIM_CR_RSTARE); +} + +/** + * @brief Indicate whether the reset after read feature is enabled. + * @rmtoll CR RSTARE LL_LPTIM_IsEnabledResetAfterRead + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledResetAfterRead(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CR, LPTIM_CR_RSTARE) == LPTIM_CR_RSTARE) ? 1UL : 0UL)); +} + +/** + * @brief Reset of the LPTIM_CNT counter register (synchronous). + * @note Due to the synchronous nature of this reset, it only takes + * place after a synchronization delay of 3 LPTIM core clock cycles + * (LPTIM core clock may be different from APB clock). + * @note COUNTRST is automatically cleared by hardware + * @rmtoll CR COUNTRST LL_LPTIM_ResetCounter\n + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ResetCounter(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CR, LPTIM_CR_COUNTRST); +} + +/** + * @brief Set the LPTIM registers update mode (enable/disable register preload) + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR PRELOAD LL_LPTIM_SetUpdateMode + * @param LPTIMx Low-Power Timer instance + * @param UpdateMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE + * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetUpdateMode(LPTIM_TypeDef *LPTIMx, uint32_t UpdateMode) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD, UpdateMode); +} + +/** + * @brief Get the LPTIM registers update mode + * @rmtoll CFGR PRELOAD LL_LPTIM_GetUpdateMode + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE + * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetUpdateMode(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD)); +} + +/** + * @brief Set the auto reload value + * @note The LPTIMx_ARR register content must only be modified when the LPTIM is enabled + * @note After a write to the LPTIMx_ARR register a new write operation to the + * same register can only be performed when the previous write operation + * is completed. Any successive write before the ARROK flag is set, will + * lead to unpredictable results. + * @note autoreload value be strictly greater than the compare value. + * @rmtoll ARR ARR LL_LPTIM_SetAutoReload + * @param LPTIMx Low-Power Timer instance + * @param AutoReload Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetAutoReload(LPTIM_TypeDef *LPTIMx, uint32_t AutoReload) +{ + MODIFY_REG(LPTIMx->ARR, LPTIM_ARR_ARR, AutoReload); +} + +/** + * @brief Get actual auto reload value + * @rmtoll ARR ARR LL_LPTIM_GetAutoReload + * @param LPTIMx Low-Power Timer instance + * @retval AutoReload Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetAutoReload(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->ARR, LPTIM_ARR_ARR)); +} + +/** + * @brief Set the compare value + * @note After a write to the LPTIMx_CMP register a new write operation to the + * same register can only be performed when the previous write operation + * is completed. Any successive write before the CMPOK flag is set, will + * lead to unpredictable results. + * @rmtoll CMP CMP LL_LPTIM_SetCompare + * @param LPTIMx Low-Power Timer instance + * @param CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetCompare(LPTIM_TypeDef *LPTIMx, uint32_t CompareValue) +{ + MODIFY_REG(LPTIMx->CMP, LPTIM_CMP_CMP, CompareValue); +} + +/** + * @brief Get actual compare value + * @rmtoll CMP CMP LL_LPTIM_GetCompare + * @param LPTIMx Low-Power Timer instance + * @retval CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetCompare(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CMP, LPTIM_CMP_CMP)); +} + +/** + * @brief Get actual counter value + * @note When the LPTIM instance is running with an asynchronous clock, reading + * the LPTIMx_CNT register may return unreliable values. So in this case + * it is necessary to perform two consecutive read accesses and verify + * that the two returned values are identical. + * @rmtoll CNT CNT LL_LPTIM_GetCounter + * @param LPTIMx Low-Power Timer instance + * @retval Counter value + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetCounter(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CNT, LPTIM_CNT_CNT)); +} + +/** + * @brief Set the counter mode (selection of the LPTIM counter clock source). + * @note The counter mode can be set only when the LPTIM instance is disabled. + * @rmtoll CFGR COUNTMODE LL_LPTIM_SetCounterMode + * @param LPTIMx Low-Power Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL + * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetCounterMode(LPTIM_TypeDef *LPTIMx, uint32_t CounterMode) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE, CounterMode); +} + +/** + * @brief Get the counter mode + * @rmtoll CFGR COUNTMODE LL_LPTIM_GetCounterMode + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL + * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetCounterMode(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE)); +} + +/** + * @brief Configure the LPTIM instance output (LPTIMx_OUT) + * @note This function must be called when the LPTIM instance is disabled. + * @note Regarding the LPTIM output polarity the change takes effect + * immediately, so the output default value will change immediately after + * the polarity is re-configured, even before the timer is enabled. + * @rmtoll CFGR WAVE LL_LPTIM_ConfigOutput\n + * CFGR WAVPOL LL_LPTIM_ConfigOutput + * @param LPTIMx Low-Power Timer instance + * @param Waveform This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ConfigOutput(LPTIM_TypeDef *LPTIMx, uint32_t Waveform, uint32_t Polarity) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE | LPTIM_CFGR_WAVPOL, Waveform | Polarity); +} + +/** + * @brief Set waveform shape + * @rmtoll CFGR WAVE LL_LPTIM_SetWaveform + * @param LPTIMx Low-Power Timer instance + * @param Waveform This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetWaveform(LPTIM_TypeDef *LPTIMx, uint32_t Waveform) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE, Waveform); +} + +/** + * @brief Get actual waveform shape + * @rmtoll CFGR WAVE LL_LPTIM_GetWaveform + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetWaveform(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVE)); +} + +/** + * @brief Set output polarity + * @rmtoll CFGR WAVPOL LL_LPTIM_SetPolarity + * @param LPTIMx Low-Power Timer instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetPolarity(LPTIM_TypeDef *LPTIMx, uint32_t Polarity) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL, Polarity); +} + +/** + * @brief Get actual output polarity + * @rmtoll CFGR WAVPOL LL_LPTIM_GetPolarity + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetPolarity(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL)); +} + +/** + * @brief Set actual prescaler division ratio. + * @note This function must be called when the LPTIM instance is disabled. + * @note When the LPTIM is configured to be clocked by an internal clock source + * and the LPTIM counter is configured to be updated by active edges + * detected on the LPTIM external Input1, the internal clock provided to + * the LPTIM must be not be prescaled. + * @rmtoll CFGR PRESC LL_LPTIM_SetPrescaler + * @param LPTIMx Low-Power Timer instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_LPTIM_PRESCALER_DIV1 + * @arg @ref LL_LPTIM_PRESCALER_DIV2 + * @arg @ref LL_LPTIM_PRESCALER_DIV4 + * @arg @ref LL_LPTIM_PRESCALER_DIV8 + * @arg @ref LL_LPTIM_PRESCALER_DIV16 + * @arg @ref LL_LPTIM_PRESCALER_DIV32 + * @arg @ref LL_LPTIM_PRESCALER_DIV64 + * @arg @ref LL_LPTIM_PRESCALER_DIV128 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetPrescaler(LPTIM_TypeDef *LPTIMx, uint32_t Prescaler) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRESC, Prescaler); +} + +/** + * @brief Get actual prescaler division ratio. + * @rmtoll CFGR PRESC LL_LPTIM_GetPrescaler + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_PRESCALER_DIV1 + * @arg @ref LL_LPTIM_PRESCALER_DIV2 + * @arg @ref LL_LPTIM_PRESCALER_DIV4 + * @arg @ref LL_LPTIM_PRESCALER_DIV8 + * @arg @ref LL_LPTIM_PRESCALER_DIV16 + * @arg @ref LL_LPTIM_PRESCALER_DIV32 + * @arg @ref LL_LPTIM_PRESCALER_DIV64 + * @arg @ref LL_LPTIM_PRESCALER_DIV128 + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetPrescaler(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRESC)); +} + +/** + * @brief Set LPTIM input 1 source (default GPIO). + * @rmtoll CFGR2 IN1SEL LL_LPTIM_SetInput1Src + * @param LPTIMx Low-Power Timer instance + * @param Src This parameter can be one of the following values: + * @arg @ref LL_LPTIM_INPUT1_SRC_GPIO + * @arg @ref LL_LPTIM_INPUT1_SRC_COMP1 + * @arg @ref LL_LPTIM_INPUT1_SRC_COMP2 + * @arg @ref LL_LPTIM_INPUT1_SRC_COMP1_COMP2 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetInput1Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) +{ + MODIFY_REG(LPTIMx->CFGR2, LPTIM_CFGR2_IN1SEL, Src); +} + +/** + * @brief Set LPTIM input 2 source (default GPIO). + * @rmtoll CFGR2 IN2SEL LL_LPTIM_SetInput2Src + * @param LPTIMx Low-Power Timer instance + * @param Src This parameter can be one of the following values: + * @arg @ref LL_LPTIM_INPUT2_SRC_GPIO + * @arg @ref LL_LPTIM_INPUT2_SRC_COMP2 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetInput2Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) +{ + MODIFY_REG(LPTIMx->CFGR2, LPTIM_CFGR2_IN2SEL, Src); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_Trigger_Configuration Trigger Configuration + * @{ + */ + +/** + * @brief Enable the timeout function + * @note This function must be called when the LPTIM instance is disabled. + * @note The first trigger event will start the timer, any successive trigger + * event will reset the counter and the timer will restart. + * @note The timeout value corresponds to the compare value; if no trigger + * occurs within the expected time frame, the MCU is waked-up by the + * compare match event. + * @rmtoll CFGR TIMOUT LL_LPTIM_EnableTimeout + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableTimeout(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); +} + +/** + * @brief Disable the timeout function + * @note This function must be called when the LPTIM instance is disabled. + * @note A trigger event arriving when the timer is already started will be + * ignored. + * @rmtoll CFGR TIMOUT LL_LPTIM_DisableTimeout + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableTimeout(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); +} + +/** + * @brief Indicate whether the timeout function is enabled. + * @rmtoll CFGR TIMOUT LL_LPTIM_IsEnabledTimeout + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledTimeout(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT) == LPTIM_CFGR_TIMOUT) ? 1UL : 0UL)); +} + +/** + * @brief Start the LPTIM counter + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR TRIGEN LL_LPTIM_TrigSw + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_TrigSw(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN); +} + +/** + * @brief Configure the external trigger used as a trigger event for the LPTIM. + * @note This function must be called when the LPTIM instance is disabled. + * @note An internal clock source must be present when a digital filter is + * required for the trigger. + * @rmtoll CFGR TRIGSEL LL_LPTIM_ConfigTrigger\n + * CFGR TRGFLT LL_LPTIM_ConfigTrigger\n + * CFGR TRIGEN LL_LPTIM_ConfigTrigger + * @param LPTIMx Low-Power Timer instance + * @param Source This parameter can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 (*) + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP3 (*) + * + * (*) Value not defined in all devices. \n + * + * @param Filter This parameter can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_FILTER_NONE + * @arg @ref LL_LPTIM_TRIG_FILTER_2 + * @arg @ref LL_LPTIM_TRIG_FILTER_4 + * @arg @ref LL_LPTIM_TRIG_FILTER_8 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING + * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ConfigTrigger(LPTIM_TypeDef *LPTIMx, uint32_t Source, uint32_t Filter, uint32_t Polarity) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL | LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGEN, Source | Filter | Polarity); +} + +/** + * @brief Get actual external trigger source. + * @rmtoll CFGR TRIGSEL LL_LPTIM_GetTriggerSource + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 (*) + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP3 (*) + * + * (*) Value not defined in all devices. \n + * + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerSource(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL)); +} + +/** + * @brief Get actual external trigger filter. + * @rmtoll CFGR TRGFLT LL_LPTIM_GetTriggerFilter + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_FILTER_NONE + * @arg @ref LL_LPTIM_TRIG_FILTER_2 + * @arg @ref LL_LPTIM_TRIG_FILTER_4 + * @arg @ref LL_LPTIM_TRIG_FILTER_8 + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerFilter(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRGFLT)); +} + +/** + * @brief Get actual external trigger polarity. + * @rmtoll CFGR TRIGEN LL_LPTIM_GetTriggerPolarity + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING + * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerPolarity(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_Clock_Configuration Clock Configuration + * @{ + */ + +/** + * @brief Set the source of the clock used by the LPTIM instance. + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR CKSEL LL_LPTIM_SetClockSource + * @param LPTIMx Low-Power Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL + * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetClockSource(LPTIM_TypeDef *LPTIMx, uint32_t ClockSource) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKSEL, ClockSource); +} + +/** + * @brief Get actual LPTIM instance clock source. + * @rmtoll CFGR CKSEL LL_LPTIM_GetClockSource + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL + * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetClockSource(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKSEL)); +} + +/** + * @brief Configure the active edge or edges used by the counter when the LPTIM is clocked by an external clock source. + * @note This function must be called when the LPTIM instance is disabled. + * @note When both external clock signal edges are considered active ones, + * the LPTIM must also be clocked by an internal clock source with a + * frequency equal to at least four times the external clock frequency. + * @note An internal clock source must be present when a digital filter is + * required for external clock. + * @rmtoll CFGR CKFLT LL_LPTIM_ConfigClock\n + * CFGR CKPOL LL_LPTIM_ConfigClock + * @param LPTIMx Low-Power Timer instance + * @param ClockFilter This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CLK_FILTER_NONE + * @arg @ref LL_LPTIM_CLK_FILTER_2 + * @arg @ref LL_LPTIM_CLK_FILTER_4 + * @arg @ref LL_LPTIM_CLK_FILTER_8 + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING + * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ConfigClock(LPTIM_TypeDef *LPTIMx, uint32_t ClockFilter, uint32_t ClockPolarity) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKFLT | LPTIM_CFGR_CKPOL, ClockFilter | ClockPolarity); +} + +/** + * @brief Get actual clock polarity + * @rmtoll CFGR CKPOL LL_LPTIM_GetClockPolarity + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING + * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetClockPolarity(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); +} + +/** + * @brief Get actual clock digital filter + * @rmtoll CFGR CKFLT LL_LPTIM_GetClockFilter + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_CLK_FILTER_NONE + * @arg @ref LL_LPTIM_CLK_FILTER_2 + * @arg @ref LL_LPTIM_CLK_FILTER_4 + * @arg @ref LL_LPTIM_CLK_FILTER_8 + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetClockFilter(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKFLT)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_Encoder_Mode Encoder Mode + * @{ + */ + +/** + * @brief Configure the encoder mode. + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR CKPOL LL_LPTIM_SetEncoderMode + * @param LPTIMx Low-Power Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING + * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetEncoderMode(LPTIM_TypeDef *LPTIMx, uint32_t EncoderMode) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKPOL, EncoderMode); +} + +/** + * @brief Get actual encoder mode. + * @rmtoll CFGR CKPOL LL_LPTIM_GetEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING + * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetEncoderMode(LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); +} + +/** + * @brief Enable the encoder mode + * @note This function must be called when the LPTIM instance is disabled. + * @note In this mode the LPTIM instance must be clocked by an internal clock + * source. Also, the prescaler division ratio must be equal to 1. + * @note LPTIM instance must be configured in continuous mode prior enabling + * the encoder mode. + * @rmtoll CFGR ENC LL_LPTIM_EnableEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableEncoderMode(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); +} + +/** + * @brief Disable the encoder mode + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR ENC LL_LPTIM_DisableEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableEncoderMode(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); +} + +/** + * @brief Indicates whether the LPTIM operates in encoder mode. + * @rmtoll CFGR ENC LL_LPTIM_IsEnabledEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledEncoderMode(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC) == LPTIM_CFGR_ENC) ? 1UL : 0UL)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear the compare match flag (CMPMCF) + * @rmtoll ICR CMPMCF LL_LPTIM_ClearFLAG_CMPM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFLAG_CMPM(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPMCF); +} + +/** + * @brief Inform application whether a compare match interrupt has occurred. + * @rmtoll ISR CMPM LL_LPTIM_IsActiveFlag_CMPM + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPM(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPM) == LPTIM_ISR_CMPM) ? 1UL : 0UL)); +} + +/** + * @brief Clear the autoreload match flag (ARRMCF) + * @rmtoll ICR ARRMCF LL_LPTIM_ClearFLAG_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFLAG_ARRM(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARRMCF); +} + +/** + * @brief Inform application whether a autoreload match interrupt has occurred. + * @rmtoll ISR ARRM LL_LPTIM_IsActiveFlag_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARRM(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARRM) == LPTIM_ISR_ARRM) ? 1UL : 0UL)); +} + +/** + * @brief Clear the external trigger valid edge flag(EXTTRIGCF). + * @rmtoll ICR EXTTRIGCF LL_LPTIM_ClearFlag_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_EXTTRIGCF); +} + +/** + * @brief Inform application whether a valid edge on the selected external trigger input has occurred. + * @rmtoll ISR EXTTRIG LL_LPTIM_IsActiveFlag_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_EXTTRIG) == LPTIM_ISR_EXTTRIG) ? 1UL : 0UL)); +} + +/** + * @brief Clear the compare register update interrupt flag (CMPOKCF). + * @rmtoll ICR CMPOKCF LL_LPTIM_ClearFlag_CMPOK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_CMPOK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPOKCF); +} + +/** + * @brief Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully completed. If so, a new one can be initiated. + * @rmtoll ISR CMPOK LL_LPTIM_IsActiveFlag_CMPOK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPOK(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPOK) == LPTIM_ISR_CMPOK) ? 1UL : 0UL)); +} + +/** + * @brief Clear the autoreload register update interrupt flag (ARROKCF). + * @rmtoll ICR ARROKCF LL_LPTIM_ClearFlag_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_ARROK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARROKCF); +} + +/** + * @brief Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully completed. If so, a new one can be initiated. + * @rmtoll ISR ARROK LL_LPTIM_IsActiveFlag_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARROK(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARROK) == LPTIM_ISR_ARROK) ? 1UL : 0UL)); +} + +/** + * @brief Clear the counter direction change to up interrupt flag (UPCF). + * @rmtoll ICR UPCF LL_LPTIM_ClearFlag_UP + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_UP(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_UPCF); +} + +/** + * @brief Informs the application whether the counter direction has changed from down to up (when the LPTIM instance operates in encoder mode). + * @rmtoll ISR UP LL_LPTIM_IsActiveFlag_UP + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_UP(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_UP) == LPTIM_ISR_UP) ? 1UL : 0UL)); +} + +/** + * @brief Clear the counter direction change to down interrupt flag (DOWNCF). + * @rmtoll ICR DOWNCF LL_LPTIM_ClearFlag_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_DOWN(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_DOWNCF); +} + +/** + * @brief Informs the application whether the counter direction has changed from up to down (when the LPTIM instance operates in encoder mode). + * @rmtoll ISR DOWN LL_LPTIM_IsActiveFlag_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_DOWN(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_DOWN) == LPTIM_ISR_DOWN) ? 1UL : 0UL)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable compare match interrupt (CMPMIE). + * @rmtoll IER CMPMIE LL_LPTIM_EnableIT_CMPM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CMPM(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE); +} + +/** + * @brief Disable compare match interrupt (CMPMIE). + * @rmtoll IER CMPMIE LL_LPTIM_DisableIT_CMPM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CMPM(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE); +} + +/** + * @brief Indicates whether the compare match interrupt (CMPMIE) is enabled. + * @rmtoll IER CMPMIE LL_LPTIM_IsEnabledIT_CMPM + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPM(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE) == LPTIM_IER_CMPMIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable autoreload match interrupt (ARRMIE). + * @rmtoll IER ARRMIE LL_LPTIM_EnableIT_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_ARRM(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE); +} + +/** + * @brief Disable autoreload match interrupt (ARRMIE). + * @rmtoll IER ARRMIE LL_LPTIM_DisableIT_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_ARRM(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE); +} + +/** + * @brief Indicates whether the autoreload match interrupt (ARRMIE) is enabled. + * @rmtoll IER ARRMIE LL_LPTIM_IsEnabledIT_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARRM(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE) == LPTIM_IER_ARRMIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable external trigger valid edge interrupt (EXTTRIGIE). + * @rmtoll IER EXTTRIGIE LL_LPTIM_EnableIT_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE); +} + +/** + * @brief Disable external trigger valid edge interrupt (EXTTRIGIE). + * @rmtoll IER EXTTRIGIE LL_LPTIM_DisableIT_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE); +} + +/** + * @brief Indicates external trigger valid edge interrupt (EXTTRIGIE) is enabled. + * @rmtoll IER EXTTRIGIE LL_LPTIM_IsEnabledIT_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE) == LPTIM_IER_EXTTRIGIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable compare register write completed interrupt (CMPOKIE). + * @rmtoll IER CMPOKIE LL_LPTIM_EnableIT_CMPOK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CMPOK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE); +} + +/** + * @brief Disable compare register write completed interrupt (CMPOKIE). + * @rmtoll IER CMPOKIE LL_LPTIM_DisableIT_CMPOK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CMPOK(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE); +} + +/** + * @brief Indicates whether the compare register write completed interrupt (CMPOKIE) is enabled. + * @rmtoll IER CMPOKIE LL_LPTIM_IsEnabledIT_CMPOK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPOK(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE) == LPTIM_IER_CMPOKIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable autoreload register write completed interrupt (ARROKIE). + * @rmtoll IER ARROKIE LL_LPTIM_EnableIT_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_ARROK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE); +} + +/** + * @brief Disable autoreload register write completed interrupt (ARROKIE). + * @rmtoll IER ARROKIE LL_LPTIM_DisableIT_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_ARROK(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE); +} + +/** + * @brief Indicates whether the autoreload register write completed interrupt (ARROKIE) is enabled. + * @rmtoll IER ARROKIE LL_LPTIM_IsEnabledIT_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARROK(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE) == LPTIM_IER_ARROKIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable direction change to up interrupt (UPIE). + * @rmtoll IER UPIE LL_LPTIM_EnableIT_UP + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_UP(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->IER, LPTIM_IER_UPIE); +} + +/** + * @brief Disable direction change to up interrupt (UPIE). + * @rmtoll IER UPIE LL_LPTIM_DisableIT_UP + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_UP(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->IER, LPTIM_IER_UPIE); +} + +/** + * @brief Indicates whether the direction change to up interrupt (UPIE) is enabled. + * @rmtoll IER UPIE LL_LPTIM_IsEnabledIT_UP + * @param LPTIMx Low-Power Timer instance + * @retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_UP(LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_UPIE) == LPTIM_IER_UPIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable direction change to down interrupt (DOWNIE). + * @rmtoll IER DOWNIE LL_LPTIM_EnableIT_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_DOWN(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE); +} + +/** + * @brief Disable direction change to down interrupt (DOWNIE). + * @rmtoll IER DOWNIE LL_LPTIM_DisableIT_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_DOWN(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE); +} + +/** + * @brief Indicates whether the direction change to down interrupt (DOWNIE) is enabled. + * @rmtoll IER DOWNIE LL_LPTIM_IsEnabledIT_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_DOWN(LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE) == LPTIM_IER_DOWNIE) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPTIM1 || LPTIM2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_LPTIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lpuart.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lpuart.h new file mode 100644 index 0000000..ef7f193 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lpuart.h @@ -0,0 +1,2646 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_lpuart.h + * @author MCD Application Team + * @brief Header file of LPUART LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_LPUART_H +#define STM32G0xx_LL_LPUART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (LPUART1) || defined (LPUART2) + +/** @defgroup LPUART_LL LPUART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Variables LPUART Private Variables + * @{ + */ +/* Array used to get the LPUART prescaler division decimal values versus @ref LPUART_LL_EC_PRESCALER values */ +static const uint16_t LPUART_PRESCALER_TAB[] = +{ + (uint16_t)1, + (uint16_t)2, + (uint16_t)4, + (uint16_t)6, + (uint16_t)8, + (uint16_t)10, + (uint16_t)12, + (uint16_t)16, + (uint16_t)32, + (uint16_t)64, + (uint16_t)128, + (uint16_t)256 +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Constants LPUART Private Constants + * @{ + */ +/* Defines used in Baud Rate related macros and corresponding register setting computation */ +#define LPUART_LPUARTDIV_FREQ_MUL 256U +#define LPUART_BRR_MASK 0x000FFFFFU +#define LPUART_BRR_MIN_VALUE 0x00000300U +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_Private_Macros LPUART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_ES_INIT LPUART Exported Init structures + * @{ + */ + +/** + * @brief LL LPUART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref LPUART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref LPUART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref LPUART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetHWFlowCtrl().*/ + +} LL_LPUART_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Constants LPUART Exported Constants + * @{ + */ + +/** @defgroup LPUART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_LPUART_WriteReg function + * @{ + */ +#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error flag */ +#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error flag */ +#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected flag */ +#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error flag */ +#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected flag */ +#define LL_LPUART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty Clear flag */ +#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */ +#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */ +#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */ +#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPUART_ReadReg function + * @{ + */ +#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPUART_ReadReg and LL_LPUART_WriteReg functions + * @{ + */ +#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_LPUART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DIRECTION Direction + * @{ + */ +#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */ +#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Macros LPUART Exported Macros + * @{ + */ + +/** @defgroup LPUART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_LPUART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPUART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup LPUART_LL_EM_Exported_Macros_Helper Helper Macros + * @{ + */ + +/** + * @brief Compute LPUARTDIV value according to Peripheral Clock and + * expected Baud Rate (20-bit value of LPUARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for LPUART Instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud Rate value to achieve + * @retval LPUARTDIV value to be used for BRR register filling + */ +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\ + ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\ + * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Functions LPUART Exported Functions + * @{ + */ + +/** @defgroup LPUART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief LPUART Enable + * @rmtoll CR1 UE LL_LPUART_Enable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Enable(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief LPUART Disable + * @note When LPUART is disabled, LPUART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the LPUART is kept, but all the status + * flags, in the LPUARTx_ISR are set to their default values. + * @note In order to go into low-power mode without generating errors on the line, + * the TE bit must be reset before and the software must wait + * for the TC bit in the LPUART_ISR to be set before resetting the UE bit. + * The DMA requests are also reset when UE = 0 so the DMA channel must + * be disabled before resetting the UE bit. + * @rmtoll CR1 UE LL_LPUART_Disable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Disable(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if LPUART is enabled + * @rmtoll CR1 UE LL_LPUART_IsEnabled + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabled(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @rmtoll CR1 FIFOEN LL_LPUART_EnableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableFIFO(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @rmtoll CR1 FIFOEN LL_LPUART_DisableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableFIFO(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @rmtoll CR1 FIFOEN LL_LPUART_IsEnabledFIFO + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledFIFO(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_SetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @rmtoll CR3 TXFTCFG LL_LPUART_GetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXFIFOThreshold(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @rmtoll CR3 RXFTCFG LL_LPUART_SetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @rmtoll CR3 RXFTCFG LL_LPUART_GetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_LPUART_ConfigFIFOsThreshold + * @param LPUARTx LPUART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \ + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief LPUART enabled in STOP Mode + * @note When this function is enabled, LPUART is able to wake up the MCU from Stop mode, provided that + * LPUART clock selection is HSI or LSE in RCC. + * @rmtoll CR1 UESM LL_LPUART_EnableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief LPUART disabled in STOP Mode + * @note When this function is disabled, LPUART is not able to wake up the MCU from Stop mode + * @rmtoll CR1 UESM LL_LPUART_DisableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if LPUART is enabled in STOP Mode + * (able to wake up MCU from Stop mode or not) + * @rmtoll CR1 UESM LL_LPUART_IsEnabledInStopMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledInStopMode(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_LPUART_EnableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_LPUART_DisableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_LPUART_EnableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_LPUART_DisableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_SetTransferDirection\n + * CR1 TE LL_LPUART_SetTransferDirection + * @param LPUARTx LPUART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_GetTransferDirection\n + * CR1 TE LL_LPUART_GetTransferDirection + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferDirection(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled) + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_LPUART_SetParity\n + * CR1 PCE LL_LPUART_SetParity + * @param LPUARTx LPUART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetParity(USART_TypeDef *LPUARTx, uint32_t Parity) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_LPUART_GetParity\n + * CR1 PCE LL_LPUART_GetParity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_LPUART_GetParity(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_LPUART_SetWakeUpMethod + * @param LPUARTx LPUART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWakeUpMethod(USART_TypeDef *LPUARTx, uint32_t Method) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_LPUART_GetWakeUpMethod + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWakeUpMethod(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_SetDataWidth + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDataWidth(USART_TypeDef *LPUARTx, uint32_t DataWidth) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_GetDataWidth + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDataWidth(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_LPUART_EnableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_LPUART_DisableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_LPUART_IsEnabledMuteMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledMuteMode(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_SetPrescaler + * @param LPUARTx LPUART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetPrescaler(USART_TypeDef *LPUARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(LPUARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_GetPrescaler + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetPrescaler(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_SetStopBitsLength + * @param LPUARTx LPUART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetStopBitsLength(USART_TypeDef *LPUARTx, uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_GetStopBitsLength + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetStopBitsLength(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_LPUART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_LPUART_SetParity() function + * - Stop bits configuration using @ref LL_LPUART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_LPUART_ConfigCharacter\n + * CR1 PCE LL_LPUART_ConfigCharacter\n + * CR1 M LL_LPUART_ConfigCharacter\n + * CR2 STOP LL_LPUART_ConfigCharacter + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigCharacter(USART_TypeDef *LPUARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_LPUART_SetTXRXSwap + * @param LPUARTx LPUART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXRXSwap(USART_TypeDef *LPUARTx, uint32_t SwapConfig) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_LPUART_GetTXRXSwap + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXRXSwap(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_LPUART_SetRXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_LPUART_GetRXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXPinLevel(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_LPUART_SetTXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_LPUART_GetTXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXPinLevel(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_LPUART_SetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBinaryDataLogic(USART_TypeDef *LPUARTx, uint32_t DataLogic) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_LPUART_GetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBinaryDataLogic(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_SetTransferBitOrder + * @param LPUARTx LPUART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferBitOrder(USART_TypeDef *LPUARTx, uint32_t BitOrder) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_GetTransferBitOrder + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferBitOrder(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Set Address of the LPUART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_LPUART_ConfigNodeAddress\n + * CR2 ADDM7 LL_LPUART_ConfigNodeAddress + * @param LPUARTx LPUART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the LPUART node. + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigNodeAddress(USART_TypeDef *LPUARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the LPUART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_LPUART_GetNodeAddress + * @param LPUARTx LPUART Instance + * @retval Address of the LPUART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddress(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_LPUART_GetNodeAddressLen + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddressLen(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_EnableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_DisableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_EnableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_DisableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_SetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_SetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetHWFlowCtrl(USART_TypeDef *LPUARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_GetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_GetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_LPUART_GetHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_EnableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableOverrunDetect(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_DisableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableOverrunDetect(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_LPUART_IsEnabledOverrunDetect + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledOverrunDetect(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_SetWKUPType + * @param LPUARTx LPUART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWKUPType(USART_TypeDef *LPUARTx, uint32_t Type) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_GetWKUPType + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure LPUART BRR register for achieving expected Baud Rate value. + * + * @note Compute and set LPUARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock and expected Baud Rate values + * @note Peripheral clock and Baud Rate values provided as function parameters should be valid + * (Baud rate value != 0). + * @note Provided that LPUARTx_BRR must be > = 0x300 and LPUART_BRR is 20-bit, + * a care should be taken when generating high baud rates using high PeriphClk + * values. PeriphClk must be in the range [3 x BaudRate, 4096 x BaudRate]. + * @rmtoll BRR BRR LL_LPUART_SetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t BaudRate) +{ + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + } +} + +/** + * @brief Return current Baud Rate value, according to LPUARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_LPUART_GetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue) +{ + uint32_t lpuartdiv; + uint32_t brrresult; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (LPUART_PRESCALER_TAB[(uint16_t)PrescalerValue])); + + lpuartdiv = LPUARTx->BRR & LPUART_BRR_MASK; + + if (lpuartdiv >= LPUART_BRR_MIN_VALUE) + { + brrresult = (uint32_t)(((uint64_t)(periphclkpresc) * LPUART_LPUARTDIV_FREQ_MUL) / lpuartdiv); + } + else + { + brrresult = 0x0UL; + } + + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_EnableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableHalfDuplex(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_DisableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableHalfDuplex(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @rmtoll CR3 HDSEL LL_LPUART_IsEnabledHalfDuplex + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledHalfDuplex(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEDT LL_LPUART_SetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEDeassertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @rmtoll CR1 DEDT LL_LPUART_GetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : c + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEDeassertionTime(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEAT LL_LPUART_SetDEAssertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEAssertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @rmtoll CR1 DEAT LL_LPUART_GetDEAssertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Time Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEAssertionTime(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_EnableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDEMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_DisableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDEMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @rmtoll CR3 DEM LL_LPUART_IsEnabledDEMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDEMode(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_SetDESignalPolarity + * @param LPUARTx LPUART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDESignalPolarity(USART_TypeDef *LPUARTx, uint32_t Polarity) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_GetDESignalPolarity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDESignalPolarity(USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the LPUART Parity Error Flag is set or not + * @rmtoll ISR PE LL_LPUART_IsActiveFlag_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_PE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Framing Error Flag is set or not + * @rmtoll ISR FE LL_LPUART_IsActiveFlag_FE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_FE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_LPUART_IsActiveFlag_NE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_NE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_LPUART_IsActiveFlag_ORE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_ORE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_LPUART_IsActiveFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_IDLE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_LPUART_IsActiveFlag_RXNE LL_LPUART_IsActiveFlag_RXNE_RXFNE + +/** + * @brief Check if the LPUART Read Data Register or LPUART RX FIFO Not Empty Flag is set or not + * @rmtoll ISR RXNE_RXFNE LL_LPUART_IsActiveFlag_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_LPUART_IsActiveFlag_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TC(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_LPUART_IsActiveFlag_TXE LL_LPUART_IsActiveFlag_TXE_TXFNF + +/** + * @brief Check if the LPUART Transmit Data Register Empty or LPUART TX FIFO Not Full Flag is set or not + * @rmtoll ISR TXE_TXFNF LL_LPUART_IsActiveFlag_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS interrupt Flag is set or not + * @rmtoll ISR CTSIF LL_LPUART_IsActiveFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_nCTS(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Flag is set or not + * @rmtoll ISR CTS LL_LPUART_IsActiveFlag_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CTS(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Busy Flag is set or not + * @rmtoll ISR BUSY LL_LPUART_IsActiveFlag_BUSY + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_BUSY(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Flag is set or not + * @rmtoll ISR CMF LL_LPUART_IsActiveFlag_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CM(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_LPUART_IsActiveFlag_SBK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_SBK(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_LPUART_IsActiveFlag_RWU + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RWU(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from stop mode Flag is set or not + * @rmtoll ISR WUF LL_LPUART_IsActiveFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_WKUP(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_LPUART_IsActiveFlag_TEACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TEACK(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_LPUART_IsActiveFlag_REACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_REACK(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Flag is set or not + * @rmtoll ISR TXFE LL_LPUART_IsActiveFlag_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Flag is set or not + * @rmtoll ISR RXFF LL_LPUART_IsActiveFlag_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFF(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Threshold Flag is set or not + * @rmtoll ISR TXFT LL_LPUART_IsActiveFlag_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFT(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Threshold Flag is set or not + * @rmtoll ISR RXFT LL_LPUART_IsActiveFlag_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFT(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_LPUART_ClearFlag_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_PE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_LPUART_ClearFlag_FE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_FE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise detected Flag + * @rmtoll ICR NECF LL_LPUART_ClearFlag_NE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_NE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_LPUART_ClearFlag_ORE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_ORE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_LPUART_ClearFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_IDLE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear TX FIFO Empty Flag + * @rmtoll ICR TXFECF LL_LPUART_ClearFlag_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_TXFE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_TXFECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_LPUART_ClearFlag_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_TC(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @rmtoll ICR CTSCF LL_LPUART_ClearFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_nCTS(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_LPUART_ClearFlag_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_CM(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @rmtoll ICR WUCF LL_LPUART_ClearFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_WKUP(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_EnableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +/* Legacy define */ +#define LL_LPUART_EnableIT_RXNE LL_LPUART_EnableIT_RXNE_RXFNE + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_EnableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_EnableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +/* Legacy define */ +#define LL_LPUART_EnableIT_TXE LL_LPUART_EnableIT_TXE_TXFNF + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_EnableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_EnableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_EnableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_EnableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_EnableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_EnableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_EnableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_EnableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_EnableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_EnableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_DisableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +/* Legacy define */ +#define LL_LPUART_DisableIT_RXNE LL_LPUART_DisableIT_RXNE_RXFNE + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_DisableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_DisableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +/* Legacy define */ +#define LL_LPUART_DisableIT_TXE LL_LPUART_DisableIT_TXE_TXFNF + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_DisableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_DisableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_DisableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_DisableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_DisableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_DisableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_DisableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_DisableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_DisableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_DisableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the LPUART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_LPUART_IsEnabledIT_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_IDLE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_LPUART_IsEnabledIT_RXNE LL_LPUART_IsEnabledIT_RXNE_RXFNE + +/** + * @brief Check if the LPUART RX Not Empty and LPUART RX FIFO Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_IsEnabledIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_LPUART_IsEnabledIT_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TC(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_LPUART_IsEnabledIT_TXE LL_LPUART_IsEnabledIT_TXE_TXFNF + +/** + * @brief Check if the LPUART TX Empty and LPUART TX FIFO Not Full Interrupt is enabled or disabled + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_IsEnabledIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_LPUART_IsEnabledIT_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_PE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_LPUART_IsEnabledIT_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CM(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Interrupt is enabled or disabled + * @rmtoll CR1 TXFEIE LL_LPUART_IsEnabledIT_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFE(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Interrupt is enabled or disabled + * @rmtoll CR1 RXFFIE LL_LPUART_IsEnabledIT_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFF(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_LPUART_IsEnabledIT_ERROR + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_ERROR(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Interrupt is enabled or disabled. + * @rmtoll CR3 CTSIE LL_LPUART_IsEnabledIT_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CTS(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @rmtoll CR3 WUFIE LL_LPUART_IsEnabledIT_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_WKUP(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART TX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 TXFTIE LL_LPUART_IsEnabledIT_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFT(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART RX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 RXFTIE LL_LPUART_IsEnabledIT_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFT(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_EnableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_DisableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_LPUART_IsEnabledDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_RX(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_EnableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_DisableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_LPUART_IsEnabledDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_TX(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_EnableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_DisableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_LPUART_IsEnabledDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the LPUART data register address used for DMA transfer + * @rmtoll RDR RDR LL_LPUART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_LPUART_DMA_GetRegAddr + * @param LPUARTx LPUART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_LPUART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_LPUART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_LPUART_DMA_GetRegAddr(USART_TypeDef *LPUARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_LPUART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData8 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_LPUART_ReceiveData8(USART_TypeDef *LPUARTx) +{ + return (uint8_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData9 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_LPUART_ReceiveData9(USART_TypeDef *LPUARTx) +{ + return (uint16_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData8 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData8(USART_TypeDef *LPUARTx, uint8_t Value) +{ + LPUARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData9 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData9(USART_TypeDef *LPUARTx, uint16_t Value) +{ + LPUARTx->TDR = Value & 0x1FFUL; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_LPUART_RequestBreakSending + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put LPUART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_LPUART_RequestEnterMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_LPUART_RequestRxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestRxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_LPUART_DeInit(USART_TypeDef *LPUARTx); +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, LL_LPUART_InitTypeDef *LPUART_InitStruct); +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 || LPUART2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_LPUART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_pwr.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_pwr.h new file mode 100644 index 0000000..23ca567 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_pwr.h @@ -0,0 +1,1531 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_PWR_H +#define STM32G0xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_SCR_CSBF PWR_SCR_CSBF +#define LL_PWR_SCR_CWUF PWR_SCR_CWUF +#define LL_PWR_SCR_CWUF6 PWR_SCR_CWUF6 +#define LL_PWR_SCR_CWUF5 PWR_SCR_CWUF5 +#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4 +#if defined(PWR_CR3_EWUP3) +#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3 +#endif +#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2 +#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1 +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_SR1_WUFI PWR_SR1_WUFI +#define LL_PWR_SR1_SBF PWR_SR1_SBF +#define LL_PWR_SR1_WUF6 PWR_SR1_WUF6 +#define LL_PWR_SR1_WUF5 PWR_SR1_WUF5 +#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4 +#if defined(PWR_CR3_EWUP3) +#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3 +#endif +#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2 +#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1 +#if defined(PWR_SR2_PVDO) +#define LL_PWR_SR2_PVDO PWR_SR2_PVDO +#endif +#define LL_PWR_SR2_VOSF PWR_SR2_VOSF +#define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF +#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE REGU VOLTAGE + * @{ + */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 PWR_CR1_VOS_0 +#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_CR1_VOS_1 +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR MODE PWR + * @{ + */ +#define LL_PWR_MODE_STOP0 (0x00000000UL) +#define LL_PWR_MODE_STOP1 (PWR_CR1_LPMS_0) +#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_1|PWR_CR1_LPMS_0) +#if defined (PWR_CR1_LPMS_2) +#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_2) +#endif +/** + * @} + */ + +#if defined(PWR_CR2_PVDE) +/** @defgroup PWR_LL_EC_PVDLEVEL PVDLEVEL + * @{ + */ +#define LL_PWR_PVDLLEVEL_0 0x000000000u /* VPVD0 > 2.05 V */ +#define LL_PWR_PVDLLEVEL_1 (PWR_CR2_PVDFT_0) /* VPVD0 > 2.2 V */ +#define LL_PWR_PVDLLEVEL_2 (PWR_CR2_PVDFT_1) /* VPVD1 > 2.36 V */ +#define LL_PWR_PVDLLEVEL_3 (PWR_CR2_PVDFT_1 | PWR_CR2_PVDFT_0) /* VPVD2 > 2.52 V */ +#define LL_PWR_PVDLLEVEL_4 (PWR_CR2_PVDFT_2) /* VPVD3 > 2.64 V */ +#define LL_PWR_PVDLLEVEL_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /* VPVD4 > 2.81 V */ +#define LL_PWR_PVDLLEVEL_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /* VPVD5 > 2.91 V */ + +#define LL_PWR_PVDHLEVEL_0 0x00000000u /* VPDD0 > 2.15 V */ +#define LL_PWR_PVDHLEVEL_1 (PWR_CR2_PVDRT_0) /* VPVD1 > 2.3 V */ +#define LL_PWR_PVDHLEVEL_2 (PWR_CR2_PVDRT_1) /* VPVD1 > 2.46 V */ +#define LL_PWR_PVDHLEVEL_3 (PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /* VPVD2 > 2.62 V */ +#define LL_PWR_PVDHLEVEL_4 (PWR_CR2_PVDRT_2) /* VPVD3 > 2.74 V */ +#define LL_PWR_PVDHLEVEL_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /* VPVD4 > 2.91 V */ +#define LL_PWR_PVDHLEVEL_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /* VPVD5 > 3.01 V */ +#define LL_PWR_PVDHLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /* External input analog voltage (Compare internally to VREFINT) */ +/** + * @} + */ +#endif + +#if defined(PWR_PVM_SUPPORT) +/** @defgroup PWR_LL_EC_PVM_IP PVM_IP + * @{ + */ +#define LL_PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */ +/** + * @} + */ +#endif + +/** @defgroup PWR_LL_EC_WAKEUP WAKEUP + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1) +#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2) +#if defined(PWR_CR3_EWUP3) +#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3) +#endif +#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4) +#if defined(PWR_CR3_EWUP5) +#define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5) +#endif +#define LL_PWR_WAKEUP_PIN6 (PWR_CR3_EWUP6) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR BATT CHARG RESISTOR + * @{ + */ +#define LL_PWR_BATTCHARG_RESISTOR_5K 0x000000000u +#define LL_PWR_BATTCHARG_RESISTOR_1_5K (PWR_CR4_VBRS) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO GPIO + * @{ + */ +#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA))) +#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB))) +#define LL_PWR_GPIO_C ((uint32_t)(&(PWR->PUCRC))) +#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD))) +#if defined(GPIOE) +#define LL_PWR_GPIO_E ((uint32_t)(&(PWR->PUCRE))) +#endif +#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF))) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT + * @{ + */ +#define LL_PWR_GPIO_BIT_0 0x00000001u +#define LL_PWR_GPIO_BIT_1 0x00000002u +#define LL_PWR_GPIO_BIT_2 0x00000004u +#define LL_PWR_GPIO_BIT_3 0x00000008u +#define LL_PWR_GPIO_BIT_4 0x00000010u +#define LL_PWR_GPIO_BIT_5 0x00000020u +#define LL_PWR_GPIO_BIT_6 0x00000040u +#define LL_PWR_GPIO_BIT_7 0x00000080u +#define LL_PWR_GPIO_BIT_8 0x00000100u +#define LL_PWR_GPIO_BIT_9 0x00000200u +#define LL_PWR_GPIO_BIT_10 0x00000400u +#define LL_PWR_GPIO_BIT_11 0x00000800u +#define LL_PWR_GPIO_BIT_12 0x00001000u +#define LL_PWR_GPIO_BIT_13 0x00002000u +#define LL_PWR_GPIO_BIT_14 0x00004000u +#define LL_PWR_GPIO_BIT_15 0x00008000u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set the main internal regulator output voltage + * @rmtoll CR1 VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling); +} + +/** + * @brief Get the main internal regulator output voltage + * @rmtoll CR1 VOS LL_PWR_GetRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ + return (READ_BIT(PWR->CR1, PWR_CR1_VOS)); +} + +/** + * @brief Switch the regulator from main mode to low-power mode + * @rmtoll CR1 LPR LL_PWR_EnableLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + +/** + * @brief Switch the regulator from low-power mode to main mode + * @rmtoll CR1 LPR LL_PWR_DisableLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); +} + +/** + * @brief Check if the regulator is in low-power mode + * @rmtoll CR1 LPR LL_PWR_IsEnabledLowPowerRunMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_LPR) == (PWR_CR1_LPR)) ? 1UL : 0UL); +} + +/** + * @brief Switch from run main mode to run low-power mode. + * @rmtoll CR1 LPR LL_PWR_EnterLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void) +{ + LL_PWR_EnableLowPowerRunMode(); +} + +/** + * @brief Switch from run main mode to low-power mode. + * @rmtoll CR1 LPR LL_PWR_ExitLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void) +{ + LL_PWR_DisableLowPowerRunMode(); +} + +/** + * @brief Enable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP)) ? 1UL : 0UL); +} + +/** + * @brief Enable Flash Power-down mode during low power sleep mode + * @rmtoll CR1 CFIPD_SLP LL_PWR_EnableFlashPowerDownInLPSleep + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInLPSleep(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP); +} + +/** + * @brief Disable Flash Power-down mode during Low power sleep mode + * @rmtoll CR1 CFIPD_SLP LL_PWR_DisableFlashPowerDownInLPSleep + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInLPSleep(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP); +} + +/** + * @brief Check if flash power-down mode during low power sleep mode domain is enabled + * @rmtoll CR1 CFIPD_SLP LL_PWR_IsEnableFlashPowerDownInLPSleep + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInLPSleep(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP) == (PWR_CR1_FPD_LPSLP)) ? 1UL : 0UL); +} + +/** + * @brief Enable Flash Power-down mode during low power run mode + * @rmtoll CR1 CFIPD_RUN LL_PWR_EnableFlashPowerDownInLPRun + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInLPRun(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN); +} + +/** + * @brief Disable Flash Power-down mode during Low power run mode + * @rmtoll CR1 CFIPD_RUN LL_PWR_DisableFlashPowerDownInLPRun + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInLPRun(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN); +} + +/** + * @brief Check if flash power-down mode during low power run mode domain is enabled + * @rmtoll CR1 CFIPD_RUN LL_PWR_IsEnableFlashPowerDownInLPRun + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInLPRun(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN) == (PWR_CR1_FPD_LPRUN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Flash Power-down mode during stop mode + * @rmtoll CR1 CFIPD_STOP LL_PWR_EnableFlashPowerDownInStop + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInStop(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_STOP); +} + +/** + * @brief Disable Flash Power-down mode during stop mode + * @rmtoll CR1 CFIPD_STOP LL_PWR_DisableFlashPowerDownInStop + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInStop(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_STOP); +} + +/** + * @brief Check if flash power-down mode during stop mode domain is enabled + * @rmtoll CR1 CFIPD_STOP LL_PWR_IsEnableFlashPowerDownInStop + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInStop(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_STOP) == (PWR_CR1_FPD_STOP)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Enable VDDIO2 supply + * @rmtoll CR2 IOSV LL_PWR_EnableVddIO2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + +/** + * @brief Disable VDDIO2 supply + * @rmtoll CR2 IOSV LL_PWR_DisableVddIO2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} + +/** + * @brief Check if VDDIO2 supply is enabled + * @rmtoll CR2 IOSV LL_PWR_IsEnabledVddIO2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddIO2(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_IOSV) == (PWR_CR2_IOSV)) ? 1UL : 0UL); +} +#endif + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Enable VDDUSB supply + * @rmtoll CR2 USV LL_PWR_EnableVddUSB + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Disable VDDUSB supply + * @rmtoll CR2 USV LL_PWR_DisableVddUSB + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Check if VDDUSB supply is enabled + * @rmtoll CR2 USV LL_PWR_IsEnabledVddUSB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV)) ? 1UL : 0UL); +} +#endif + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Enable the Power Voltage Monitoring on a peripheral + * @rmtoll CR2 PVMUSB LL_PWR_EnablePVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_USB (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage) +{ + SET_BIT(PWR->CR2, PeriphVoltage); +} + +/** + * @brief Disable the Power Voltage Monitoring on a peripheral + * @rmtoll CR2 PVMUSB LL_PWR_DisablePVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_USB (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage) +{ + CLEAR_BIT(PWR->CR2, PeriphVoltage); +} + +/** + * @brief Check if Power Voltage Monitoring is enabled on a peripheral + * @rmtoll CR2 PVMUSB LL_PWR_IsEnabledPVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_USB (*) + * + * (*) value not defined in all devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage) +{ + return ((READ_BIT(PWR->CR2, PeriphVoltage) == (PeriphVoltage)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Set Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_SetPowerMode + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STOP1 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, LowPowerMode); +} + +/** + * @brief Get Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STOP1 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS)); +} + +#if defined (PWR_CR2_PVDE) +/** + * @brief Configure the high voltage threshold detected by the Power Voltage Detector + * @rmtoll CR2 PLS LL_PWR_SetPVDHighLevel + * @param PVDHighLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDHLEVEL_0 + * @arg @ref LL_PWR_PVDHLEVEL_1 + * @arg @ref LL_PWR_PVDHLEVEL_2 + * @arg @ref LL_PWR_PVDHLEVEL_3 + * @arg @ref LL_PWR_PVDHLEVEL_4 + * @arg @ref LL_PWR_PVDHLEVEL_5 + * @arg @ref LL_PWR_PVDHLEVEL_6 + * @arg @ref LL_PWR_PVDHLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDHighLevel(uint32_t PVDHighLevel) +{ + MODIFY_REG(PWR->CR2, PWR_CR2_PVDRT, PVDHighLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR2 PLS LL_PWR_GetPVDHighLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDHLEVEL_0 + * @arg @ref LL_PWR_PVDHLEVEL_1 + * @arg @ref LL_PWR_PVDHLEVEL_2 + * @arg @ref LL_PWR_PVDHLEVEL_3 + * @arg @ref LL_PWR_PVDHLEVEL_4 + * @arg @ref LL_PWR_PVDHLEVEL_5 + * @arg @ref LL_PWR_PVDHLEVEL_6 + * @arg @ref LL_PWR_PVDHLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDHighLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PVDRT)); +} +/** + * @brief Configure the low voltage threshold detected by the Power Voltage Detector + * @rmtoll CR2 PLS LL_PWR_SetPVDLowLevel + * @param PVDLowLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLLEVEL_0 + * @arg @ref LL_PWR_PVDLLEVEL_1 + * @arg @ref LL_PWR_PVDLLEVEL_2 + * @arg @ref LL_PWR_PVDLLEVEL_3 + * @arg @ref LL_PWR_PVDLLEVEL_4 + * @arg @ref LL_PWR_PVDLLEVEL_5 + * @arg @ref LL_PWR_PVDLLEVEL_6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLowLevel(uint32_t PVDLowLevel) +{ + MODIFY_REG(PWR->CR2, PWR_CR2_PVDFT, PVDLowLevel); +} + +/** + * @brief Get the low voltage threshold detection + * @rmtoll CR2 PLS LL_PWR_GetPVDLowLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLLEVEL_0 + * @arg @ref LL_PWR_PVDLLEVEL_1 + * @arg @ref LL_PWR_PVDLLEVEL_2 + * @arg @ref LL_PWR_PVDLLEVEL_3 + * @arg @ref LL_PWR_PVDLLEVEL_4 + * @arg @ref LL_PWR_PVDLLEVEL_5 + * @arg @ref LL_PWR_PVDLLEVEL_6 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLowLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PVDFT)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR2 PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR2 PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR2 PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Enable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_EnableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableInternWU(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Disable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_DisableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableInternWU(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Check if Internal Wake-up line is enabled + * @rmtoll CR3 EIWF LL_PWR_IsEnabledInternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_EIWUL) == (PWR_CR3_EIWUL)) ? 1UL : 0UL); +} + +/** + * @brief Enable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_EnablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_DisablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Check if pull-up and pull-down configuration is enabled + * @rmtoll CR3 APC LL_PWR_IsEnabledPUPDCfg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_APC) == (PWR_CR3_APC)) ? 1UL : 0UL); +} + +#if defined(PWR_CR3_RRS) +/** + * @brief Enable SRAM content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_EnableSRAMRetention + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSRAMRetention(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_RRS); +} + +/** + * @brief Disable SRAM content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_DisableSRAMRetention + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSRAMRetention(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); +} + +/** + * @brief Check if SRAM content retention in Standby mode is enabled + * @rmtoll CR3 RRS LL_PWR_IsEnabledSRAMRetention + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAMRetention(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_RRS) == (PWR_CR3_RRS)) ? 1UL : 0UL); +} +#endif + +#if defined(PWR_CR3_ENB_ULP) +/** + * @brief Enable sampling mode of LPMMU reset block + * @rmtoll CR3 ENB_ULP LL_PWR_EnableLPMUResetSamplingMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLPMUResetSamplingMode(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_ENB_ULP); +} + +/** + * @brief Disable sampling mode of LPMMU reset block + * @rmtoll CR3 ENB_ULP LL_PWR_DisableLPMUResetSamplingMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLPMUResetSamplingMode(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_ENB_ULP); +} + +/** + * @brief Check if sampling mode of LPMMU reset block + * @rmtoll CR3 ENB_ULP LL_PWR_IsEnableLPMUResetSamplingMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableLPMUResetSamplingMode(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_ENB_ULP) == (PWR_CR3_ENB_ULP)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP2 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP3 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP4 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP5 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP6 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + * @note (*) availability depends on devices + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP2 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP3 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP4 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP5 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP6 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + * @note (*) availability depends on devices + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CR3 EWUP1 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP2 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP3 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP4 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP5 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP6 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval State of bit (1 or 0). + * @note (*) availability depends on devices + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR3, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Set the resistor impedance + * @rmtoll CR4 VBRS LL_PWR_SetBattChargResistor + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_1_5K + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor) +{ + MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, Resistor); +} + +/** + * @brief Get the resistor impedance + * @rmtoll CR4 VBRS LL_PWR_GetBattChargResistor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_1_5K + */ +__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void) +{ + return (uint32_t)(READ_BIT(PWR->CR4, PWR_CR4_VBRS)); +} + +/** + * @brief Enable battery charging + * @rmtoll CR4 VBE LL_PWR_EnableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void) +{ + SET_BIT(PWR->CR4, PWR_CR4_VBE); +} + +/** + * @brief Disable battery charging + * @rmtoll CR4 VBE LL_PWR_DisableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + +/** + * @brief Check if battery charging is enabled + * @rmtoll CR4 VBE LL_PWR_IsEnabledBatteryCharging + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) +{ + return ((READ_BIT(PWR->CR4, PWR_CR4_VBE) == (PWR_CR4_VBE)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin polarity low for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP5 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP6 LL_PWR_SetWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + * @note (*) availability depends on devices + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Set the Wake-Up pin polarity high for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP5 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP6 LL_PWR_SetWakeUpPinPolarityHigh + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @note (*) availability depends on devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Get the Wake-Up pin polarity for the event detection + * @rmtoll CR4 WP1 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP5 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP6 LL_PWR_IsWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @note (*) availability depends on devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR4, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRF PU0-13 LL_PWR_EnableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Disable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRF PU0-13 LL_PWR_DisableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Check if GPIO pull-up state is enabled + * @rmtoll PUCRA PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRF PU0-13 LL_PWR_IsEnabledGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)GPIO), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRF PD0-13 LL_PWR_EnableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRF PD0-13 LL_PWR_DisableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Check if GPIO pull-down state is enabled + * @rmtoll PDCRA PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRF PD0-13 LL_PWR_IsEnabledGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Wake-up line Flag + * @rmtoll SR1 WUFI LL_PWR_IsActiveFlag_InternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI)) ? 1UL : 0UL); +} + +/** + * @brief Get Stand-By Flag + * @rmtoll SR1 SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_SBF) == (PWR_SR1_SBF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 6 + * @rmtoll SR1 WUF6 LL_PWR_IsActiveFlag_WU6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU6(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF6) == (PWR_SR1_WUF6)) ? 1UL : 0UL); +} + +#if defined(PWR_CR3_EWUP5) +/** + * @brief Get Wake-up Flag 5 + * @rmtoll SR1 WUF5 LL_PWR_IsActiveFlag_WU5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Get Wake-up Flag 4 + * @rmtoll SR1 WUF4 LL_PWR_IsActiveFlag_WU4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4)) ? 1UL : 0UL); +} + +#if defined(PWR_CR3_EWUP3) +/** + * @brief Get Wake-up Flag 3 + * @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Get Wake-up Flag 2 + * @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 1 + * @rmtoll SR1 WUF1 LL_PWR_IsActiveFlag_WU1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF1) == (PWR_SR1_WUF1)) ? 1UL : 0UL); +} + +/** + * @brief Clear Stand-By Flag + * @rmtoll SCR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll SCR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF); +} + +/** + * @brief Clear Wake-up Flag 6 + * @rmtoll SCR CWUF6 LL_PWR_ClearFlag_WU6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU6(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF6); +} + +#if defined(PWR_CR3_EWUP5) +/** + * @brief Clear Wake-up Flag 5 + * @rmtoll SCR CWUF5 LL_PWR_ClearFlag_WU5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF5); +} +#endif + +/** + * @brief Clear Wake-up Flag 4 + * @rmtoll SCR CWUF4 LL_PWR_ClearFlag_WU4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF4); +} + +#if defined(PWR_CR3_EWUP3) +/** + * @brief Clear Wake-up Flag 3 + * @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF3); +} +#endif + +/** + * @brief Clear Wake-up Flag 2 + * @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF2); +} + +/** + * @brief Clear Wake-up Flag 1 + * @rmtoll SCR CWUF1 LL_PWR_ClearFlag_WU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF1); +} + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Indicate whether VDD voltage is below or above the selected PVD + * threshold + * @rmtoll SR2 PVDMO_USB LL_PWR_IsActiveFlag_PVMOUSB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMOUSB(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO_USB) == (PWR_SR2_PVMO_USB)) ? 1UL : 0UL); +} +#endif + +#if defined(PWR_SR2_PVDO) +/** + * @brief Indicate whether VDD voltage is below or above the selected PVD + * threshold + * @rmtoll SR2 PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Indicate whether the regulator is ready in the selected voltage + * range or if its output voltage is still changing to the required + * voltage level + * @note: Take care, return value "0" means the regulator is ready. + * Return value "1" means the output voltage range is still changing. + * @rmtoll SR2 VOSF LL_PWR_IsActiveFlag_VOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_VOSF) == (PWR_SR2_VOSF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the regulator is ready in main mode or is in + * low-power mode + * @note: Take care, return value "0" means regulator is ready in main mode + * Return value "1" means regulator is in low-power mode (LPR) + * @rmtoll SR2 REGLPF LL_PWR_IsActiveFlag_REGLPF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPF) == (PWR_SR2_REGLPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether or not the low-power regulator is ready + * @rmtoll SR2 REGLPS LL_PWR_IsActiveFlag_REGLPS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == (PWR_SR2_REGLPS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether or not the flash is ready to be accessed + * @rmtoll SR2 FLASH_RDY LL_PWR_IsActiveFlag_FLASH_RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_FLASH_RDY(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_FLASH_RDY) == (PWR_SR2_FLASH_RDY)) ? 1UL : 0UL); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_PWR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h new file mode 100644 index 0000000..6ccd2b8 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h @@ -0,0 +1,3886 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_RCC_H +#define STM32G0xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ + + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 48000000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +#if defined(RCC_HSI48_SUPPORT) +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ +#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_PWRRSTF RCC_CSR_PWRRSTF /*!< BOR or POR/PDR reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Selection + * @{ + */ +#define LL_RCC_LSCO_CLKSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock */ +#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_1 /*!< PLL selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_1 /*!< PLL used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 0x00000000U /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 0x00000000U /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE_2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSI_DIV HSI division factor + * @{ + */ +#define LL_RCC_HSI_DIV_1 0x00000000U /*!< HSI not divided */ +#define LL_RCC_HSI_DIV_2 RCC_CR_HSIDIV_0 /*!< HSI divided by 2 */ +#define LL_RCC_HSI_DIV_4 RCC_CR_HSIDIV_1 /*!< HSI divided by 4 */ +#define LL_RCC_HSI_DIV_8 (RCC_CR_HSIDIV_1 | RCC_CR_HSIDIV_0) /*!< HSI divided by 8 */ +#define LL_RCC_HSI_DIV_16 RCC_CR_HSIDIV_2 /*!< HSI divided by 16 */ +#define LL_RCC_HSI_DIV_32 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_0) /*!< HSI divided by 32 */ +#define LL_RCC_HSI_DIV_64 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_1) /*!< HSI divided by 64 */ +#define LL_RCC_HSI_DIV_128 RCC_CR_HSIDIV /*!< HSI divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_1 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI16 selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_CFGR_MCOSEL_3) +#define LL_RCC_MCO1SOURCE_PLLPCLK RCC_CFGR_MCOSEL_3 /*!< PLLPCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLQCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_0) /*!< PLLQCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_RTCCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1) /*!< RTCCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_RTC_WKUP (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_0) /*!< RTC_Wakeup selection as MCO1 source */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 0x00000000U /*!< MCO1 not divided */ +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO1 divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO1 divided by 4 */ +#define LL_RCC_MCO1_DIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO1 divided by 16 */ +#define LL_RCC_MCO1_DIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 32 */ +#define LL_RCC_MCO1_DIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO1 divided by 64 */ +#define LL_RCC_MCO1_DIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 128 */ +#if defined(RCC_CFGR_MCOPRE_3) +#define LL_RCC_MCO1_DIV_256 RCC_CFGR_MCOPRE_3 /*!< MCO divided by 256 */ +#define LL_RCC_MCO1_DIV_512 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 512 */ +#define LL_RCC_MCO1_DIV_1024 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 1024 */ +#endif /* RCC_CFGR_MCOPRE_3 */ +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_LL_EC_MCO2SOURCE MCO2 SOURCE selection + * @{ + */ +#define LL_RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO2SOURCE_HSI48 RCC_CFGR_MCO2SEL_1 /*!< HSI48 selection as MCO2 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< HSI16 selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLCLK (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_0) /*!< Main PLL "R" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_1) /*!< LSI selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< LSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLPCLK RCC_CFGR_MCO2SEL_3 /*!< PLL "P" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLQCLK (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_0) /*!< PLL "Q" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_RTCCLK (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_1) /*!< RTC Clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< RTC Wakeup timer selection as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO2_DIV MCO2 prescaler + * @{ + */ +#define LL_RCC_MCO2_DIV_1 0x00000000U /*!< MCO2 not divided */ +#define LL_RCC_MCO2_DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO2 divided by 2 */ +#define LL_RCC_MCO2_DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO2 divided by 4 */ +#define LL_RCC_MCO2_DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 8 */ +#define LL_RCC_MCO2_DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO2 divided by 16 */ +#define LL_RCC_MCO2_DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 32 */ +#define LL_RCC_MCO2_DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 64 */ +#define LL_RCC_MCO2_DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 128 */ +#define LL_RCC_MCO2_DIV_256 RCC_CFGR_MCO2PRE_3 /*!< MCO2 divided by 256 */ +#define LL_RCC_MCO2_DIV_512 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 512 */ +#define LL_RCC_MCO2_DIV_1024 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 1024 */ +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_HSI ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_1) /*!< HSI clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_LSE ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL) /*!< LSE clock used as USART1 clock source */ +#define LL_RCC_USART2_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_HSI ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_1) /*!< HSI clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_LSE ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL) /*!< LSE clock used as USART2 clock source */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART3SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_HSI ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_1) /*!< HSI clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_LSE ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL) /*!< LSE clock used as USART3 clock source */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(LPUART1) || defined(LPUART2) +/** @defgroup RCC_LL_EC_LPUARTx_CLKSOURCE Peripheral LPUART clock source selection + * @{ + */ +#if defined(LPUART2) +#define LL_RCC_LPUART2_CLKSOURCE_PCLK1 ((RCC_CCIPR_LPUART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL_0) /*!< SYSCLK clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_HSI ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL_1) /*!< HSI clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_LSE ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL) /*!< LSE clock used as LPUART2 clock source */ +#endif /* LPUART2 */ +#define LL_RCC_LPUART1_CLKSOURCE_PCLK1 ((RCC_CCIPR_LPUART1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL_0) /*!< SYSCLK clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_HSI ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL_1) /*!< HSI clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_LSE ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL) /*!< LSE clock used as LPUART1 clock source */ +/** + * @} + */ +#endif /* LPUART1 || LPUART2 */ + +/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE_PCLK1 ((RCC_CCIPR_I2C1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_SYSCLK ((RCC_CCIPR_I2C1SEL << 16U) | RCC_CCIPR_I2C1SEL_0) /*!< SYSCLK clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_HSI ((RCC_CCIPR_I2C1SEL << 16U) | RCC_CCIPR_I2C1SEL_1) /*!< HSI clock used as I2C1 clock source */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE_PCLK1 ((RCC_CCIPR_I2C2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_SYSCLK ((RCC_CCIPR_I2C2SEL << 16U) | RCC_CCIPR_I2C2SEL_0) /*!< SYSCLK clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_HSI ((RCC_CCIPR_I2C2SEL << 16U) | RCC_CCIPR_I2C2SEL_1) /*!< HSI clock used as I2C2 clock source */ +#endif /* RCC_CCIPR_I2C2SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Sx_CLKSOURCE Peripheral I2S clock source selection + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_RCC_I2S1_CLKSOURCE_SYSCLK ((RCC_CCIPR2_I2S1SEL << 16U) | 0x00000000U) /*!< SYSCLK clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLL ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL_0) /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_HSI ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL_1) /*!< HSI clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL) /*!< External clock used as I2S1 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_SYSCLK ((RCC_CCIPR2_I2S2SEL << 16U) | 0x00000000U) /*!< SYSCLK clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PLL ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL_0) /*!< PLL clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_HSI ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL_1) /*!< HSI clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PIN ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL) /*!< External clock used as I2S2 clock source */ +#else +#define LL_RCC_I2S1_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLL RCC_CCIPR_I2S1SEL_0 /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_HSI RCC_CCIPR_I2S1SEL_1 /*!< HSI clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CCIPR_I2S1SEL /*!< External clock used as I2S1 clock source */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @} + */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCC_LL_EC_TIMx_CLKSOURCE Peripheral TIM clock source selection + * @{ + */ +#define LL_RCC_TIM1_CLKSOURCE_PCLK1 (RCC_CCIPR_TIM1SEL | (0x00000000U >> 16U)) /*!< PCLK1 clock used as TIM1 clock source */ +#define LL_RCC_TIM1_CLKSOURCE_PLL (RCC_CCIPR_TIM1SEL | (RCC_CCIPR_TIM1SEL >> 16U)) /*!< PLL used as TIM1 clock source */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @addtogroup RCC_LL_EC_TIMx_CLKSOURCE + * @{ + */ +#define LL_RCC_TIM15_CLKSOURCE_PCLK1 (RCC_CCIPR_TIM15SEL | (0x00000000U >> 16U)) /*!< PCLK1 clock used as TIM15 clock source */ +#define LL_RCC_TIM15_CLKSOURCE_PLL (RCC_CCIPR_TIM15SEL | (RCC_CCIPR_TIM15SEL >> 16U)) /*!< PLL used as TIM15 clock source */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** @defgroup RCC_LL_EC_LPTIMx_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 (RCC_CCIPR_LPTIM1SEL | (0x00000000U >> 16U)) /*!< PCLK1 selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16U)) /*!< LSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_HSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16U)) /*!< HSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSE (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16U)) /*!< LSE selected as LPTIM1 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK1 (RCC_CCIPR_LPTIM2SEL | (0x00000000U >> 16U)) /*!< PCLK1 selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16U)) /*!< LSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_HSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16U)) /*!< HSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSE (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16U)) /*!< LSE selected as LPTIM2 clock */ +/** + * @} + */ +#endif /* LPTIM1 && LPTIM2*/ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE_HSI Peripheral CEC clock source selection + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as CEC clock */ +#define LL_RCC_CEC_CLKSOURCE_LSE RCC_CCIPR_CECSEL /*!< LSE oscillator clock used as CEC clock */ + +/** + * @} +*/ +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN_CLKSOURCE_HSI Peripheral FDCAN clock source selection + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 oscillator clock used as FDCAN clock */ +#define LL_RCC_FDCAN_CLKSOURCE_PLL RCC_CCIPR2_FDCANSEL_0 /*!< PLL "Q" oscillator clock used as FDCAN clock */ +#define LL_RCC_FDCAN_CLKSOURCE_HSE RCC_CCIPR2_FDCANSEL_1 /*!< HSE oscillator clock used as FDCAN clock */ + +/** + * @} +*/ +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RNG clock */ +#define LL_RCC_RNG_CLKSOURCE_HSI_DIV8 RCC_CCIPR_RNGSEL_0 /*!< HSI oscillator clock divided by 8 used as RNG clock, available on cut2.0 */ +#define LL_RCC_RNG_CLKSOURCE_SYSCLK RCC_CCIPR_RNGSEL_1 /*!< SYSCLK divided by 1 used as RNG clock */ +#define LL_RCC_RNG_CLKSOURCE_PLL RCC_CCIPR_RNGSEL /*!< PLL used as RNG clock */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG_CLK_DIV Peripheral RNG clock division factor + * @{ + */ +#define LL_RCC_RNG_CLK_DIV1 0x00000000U /*!< RNG clock not divided */ +#define LL_RCC_RNG_CLK_DIV2 RCC_CCIPR_RNGDIV_0 /*!< RNG clock divided by 2 */ +#define LL_RCC_RNG_CLK_DIV4 RCC_CCIPR_RNGDIV_1 /*!< RNG clock divided by 4 */ +#define LL_RCC_RNG_CLK_DIV8 RCC_CCIPR_RNGDIV /*!< RNG clock divided by 8 */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_USB_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as USB clock source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_USB_CLKSOURCE_HSE RCC_CCIPR2_USBSEL_0 /*!< PLL clock used as USB clock source */ +#define LL_RCC_USB_CLKSOURCE_PLL RCC_CCIPR2_USBSEL_1 /*!< PLL clock used as USB clock source */ +/** + * @} + */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_PLL RCC_CCIPR_ADCSEL_0 /*!< PLL used as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_HSI RCC_CCIPR_ADCSEL_1 /*!< HSI used as ADC clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx Peripheral USARTx get clock source + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE RCC_CCIPR_USART1SEL /*!< USART1 Clock source selection */ +#define LL_RCC_USART2_CLKSOURCE RCC_CCIPR_USART2SEL /*!< USART2 Clock source selection */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE RCC_CCIPR_USART3SEL /*!< USART3 Clock source selection */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(LPUART1) +/** @defgroup RCC_LL_EC_LPUART1 Peripheral LPUART get clock source + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE RCC_CCIPR_LPUART1SEL /*!< LPUART1 Clock source selection */ +#if defined(LPUART2) +#define LL_RCC_LPUART2_CLKSOURCE RCC_CCIPR_LPUART2SEL /*!< LPUART2 Clock source selection */ +#endif /* LPUART2 */ +/** + * @} + */ +#endif /* LPUART1 */ + +/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE RCC_CCIPR_I2C1SEL /*!< I2C1 Clock source selection */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE RCC_CCIPR_I2C2SEL /*!< I2C2 Clock source selection */ +#endif /* RCC_CCIPR_I2C2SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_RCC_I2S1_CLKSOURCE RCC_CCIPR2_I2S1SEL /*!< I2S1 Clock source selection */ +#define LL_RCC_I2S2_CLKSOURCE RCC_CCIPR2_I2S2SEL /*!< I2S2 Clock source selection */ +#else +#define LL_RCC_I2S1_CLKSOURCE RCC_CCIPR_I2S1SEL /*!< I2S1 Clock source selection */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCC_LL_EC_TIMx Peripheral TIMx get clock source + * @{ + */ +#define LL_RCC_TIM1_CLKSOURCE RCC_CCIPR_TIM1SEL /*!< TIM1 Clock source selection */ +#if defined(RCC_CCIPR_TIM15SEL) +#define LL_RCC_TIM15_CLKSOURCE RCC_CCIPR_TIM15SEL /*!< TIM15 Clock source selection */ +#endif /* RCC_CCIPR_TIM15SEL */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE RCC_CCIPR_LPTIM1SEL /*!< LPTIM2 Clock source selection */ +#define LL_RCC_LPTIM2_CLKSOURCE RCC_CCIPR_LPTIM2SEL /*!< LPTIM2 Clock source selection */ +/** + * @} + */ +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE RCC_CCIPR_CECSEL /*!< CEC Clock source selection */ +/** + * @} + */ +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN Peripheral FDCAN get clock source + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE RCC_CCIPR2_FDCANSEL /*!< FDCAN Clock source selection */ +/** + * @} + */ +#endif /* FDCAN1 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#define LL_RCC_USB_CLKSOURCE RCC_CCIPR2_USBSEL /*!< USB Clock source selection */ +/** + * @} + */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE RCC_CCIPR_RNGSEL /*!< RNG Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RNG_DIV Peripheral RNG get clock division factor + * @{ + */ +#define LL_RCC_RNG_CLKDIV RCC_CCIPR_RNGDIV /*!< RNG Clock division factor */ +/** + * @} + */ +#endif /* RNG */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR_ADCSEL /*!< ADC Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLM_DIV PLL division factor (PLLM) + * @{ + */ +#define LL_RCC_PLLM_DIV_1 0x00000000U /*!< PLL division factor by 1 */ +#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_0) /*!< PLL division factor by 2 */ +#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1) /*!< PLL division factor by 3 */ +#define LL_RCC_PLLM_DIV_4 ((RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0)) /*!< PLL division factor by 4 */ +#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2) /*!< PLL division factor by 5 */ +#define LL_RCC_PLLM_DIV_6 ((RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0)) /*!< PLL division factor by 6 */ +#define LL_RCC_PLLM_DIV_7 ((RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1)) /*!< PLL division factor by 7 */ +#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM) /*!< PLL division factor by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) + * @{ + */ +#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ +#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */ +#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ +#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */ +#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ +#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */ +#define LL_RCC_PLLR_DIV_8 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) + * @{ + */ +#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 2 */ +#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 3 */ +#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 4 */ +#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 5 */ +#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 6 */ +#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 7 */ +#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 8 */ +#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 9 */ +#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 10 */ +#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 11 */ +#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 12 */ +#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 13 */ +#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 14 */ +#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 15 */ +#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 16 */ +#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 17 */ +#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 18 */ +#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 19 */ +#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 20 */ +#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 21 */ +#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 22 */ +#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 23 */ +#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 24 */ +#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 25 */ +#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 26 */ +#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 27*/ +#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 28 */ +#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 29 */ +#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 30 */ +#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 31 */ +#define LL_RCC_PLLP_DIV_32 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 32 */ +/** + * @} + */ + +#if defined(RCC_PLLQ_SUPPORT) +/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) + * @{ + */ +#define LL_RCC_PLLQ_DIV_2 (RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 2 */ +#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 3 */ +#define LL_RCC_PLLQ_DIV_4 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 4 */ +#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 5 */ +#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 6 */ +#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 7 */ +#define LL_RCC_PLLQ_DIV_8 (RCC_PLLCFGR_PLLQ) /*!< Main PLL division factor for PLLQ output by 8 */ +/** + * @} + */ +#endif /* RCC_PLLQ_SUPPORT */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG((RCC->__REG__), (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency on system domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U)) + +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on I2S domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S1_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on I2S2 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S2_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S2_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on ADC domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) + +#if defined(RNG) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on RNG domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_RNG_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_RNG_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* RNG */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on TIM1 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_TIM1_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_TIM1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#if defined(TIM15) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on TIM15 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_TIM15_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_TIM15_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* TIM15 */ +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on FDCAN domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FDCAN_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FDCAN_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on USB domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_USB_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_USB_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__,__AHBPRESCALER__) \ + ((__SYSCLKFREQ__) >> (AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) \ + ((__HCLKFREQ__) >> (APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE_Pos] & 0x1FU)) + +/** + * @brief Helper macro to calculate the HSISYS frequency + * @param __HSIDIV__ This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval HSISYS clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HSI_FREQ(__HSIDIV__) (HSI_VALUE / (1U << ((__HSIDIV__)>> RCC_CR_HSIDIV_Pos))) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI even in stop mode + * @note HSI oscillator is forced ON even in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI in stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_DisableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Check if HSI in stop mode is enabled + * @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledInStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIKERON) == (RCC_CR_HSIKERON)) ? 1UL : 0UL); +} + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_ICSCR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 64, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 127 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 + * @rmtoll CR HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Disable HSI48 + * @rmtoll CR HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Check if HSI48 oscillator Ready + * @rmtoll CR HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == RCC_CR_HSI48RDY) ? 1UL : 0UL); +} + +/** + * @brief Get HSI48 Calibration value + * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0x1FF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos); +} + +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Enable Clock security system on LSE. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Disable Clock security system on LSE. + * @note Clock security system can be disabled only after a LSE + * failure detection. In that case it MUST be disabled by software. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)) ? 1UL : 0UL); +} + +/** + * @brief Check if CSS on LSE failure Detection + * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsCSSDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == (RCC_BDCR_LSECSSD)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSCO LSCO + * @{ + */ + +/** + * @brief Enable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Disable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Configure Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_SetSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL, Source); +} + +/** + * @brief Get Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSCOSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, Prescaler); +} + +/** + * @brief Set HSI16 division factor + * @rmtoll CR HSIDIV LL_RCC_SetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @param HSIDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetHSIDiv(uint32_t HSIDiv) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, HSIDiv); +} +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE)); +} + +/** + * @brief Get HSI16 Division factor + * @rmtoll CR HSIDIV LL_RCC_GetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + */ +__STATIC_INLINE uint32_t LL_RCC_GetHSIDiv(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO1 MCO1 + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n + * CFGR MCOPRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*) + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO1SOURCE_LSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLPCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLQCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_RTCCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_RTC_WKUP (*) + * + * (*) value not defined in all devices. + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_32 + * @arg @ref LL_RCC_MCO1_DIV_64 + * @arg @ref LL_RCC_MCO1_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_LL_EF_MCO2 MCO2 + * @{ + */ + +/** + * @brief Configure MCO2 + * @rmtoll CFGR MCO2SEL LL_RCC_ConfigMCO2\n + * CFGR MCO2PRE LL_RCC_ConfigMCO2 + * @note feature not available in all devices. + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_HSI + * @arg @ref LL_RCC_MCO2SOURCE_HSI48 + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO2SOURCE_LSI + * @arg @ref LL_RCC_MCO2SOURCE_LSE + * @arg @ref LL_RCC_MCO2SOURCE_PLLPCLK + * @arg @ref LL_RCC_MCO2SOURCE_PLLQCLK + * @arg @ref LL_RCC_MCO2SOURCE_RTCCLK + * @arg @ref LL_RCC_MCO2SOURCE_RTC_WKUP + * + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_8 + * @arg @ref LL_RCC_MCO2_DIV_16 + * @arg @ref LL_RCC_MCO2_DIV_32 + * @arg @ref LL_RCC_MCO2_DIV_64 + * @arg @ref LL_RCC_MCO2_DIV_128 + * @arg @ref LL_RCC_MCO2_DIV_256 + * @arg @ref LL_RCC_MCO2_DIV_512 + * @arg @ref LL_RCC_MCO2_DIV_1024 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO2(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_SetUSARTClockSource + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (USARTxSource >> 16U), (USARTxSource & 0x0000FFFFU)); +} + +#if defined(LPUART1) +/** + * @brief Configure LPUARTx clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource + * @rmtoll CCIPR LPUART2SEL LL_RCC_SetLPUARTClockSource + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (LPUARTxSource >> 16U), (LPUARTxSource & 0x0000FFFFU)); +} +#endif /* LPUART1 */ + +/** + * @brief Configure I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_SetI2CClockSource + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*) + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) +{ + MODIFY_REG(RCC->CCIPR, (I2CxSource >> 16U), (I2CxSource & 0x0000FFFFU)); +} + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Configure TIMx clock source + * @rmtoll CCIPR TIMxSEL LL_RCC_SetTIMClockSource + * @param TIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK1 + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK1 + * @endif + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetTIMClockSource(uint32_t TIMxSource) +{ + MODIFY_REG(RCC->CCIPR, (TIMxSource & 0xFFFF0000U), (TIMxSource << 16)); +} +#endif /* RCC_CCIPR_TIM1SEL && RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Configure LPTIMx clock source + * @rmtoll CCIPR LPTIMxSEL LL_RCC_SetLPTIMClockSource + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) +{ + MODIFY_REG(RCC->CCIPR, (LPTIMxSource & 0xFFFF0000U), (LPTIMxSource << 16U)); +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(CEC) +/** + * @brief Configure CEC clock source + * @rmtoll CCIPR CECSEL LL_RCC_SetCECClockSource + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t CECxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, CECxSource); +} +#endif /* CEC */ + +#if defined(RCC_CCIPR_RNGDIV) +/** + * @brief Configure RNG division factor + * @rmtoll CCIPR RNGDIV LL_RCC_SetRNGClockDiv + * @param RNGxDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLK_DIV1 + * @arg @ref LL_RCC_RNG_CLK_DIV2 + * @arg @ref LL_RCC_RNG_CLK_DIV4 + * @arg @ref LL_RCC_RNG_CLK_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockDiv(uint32_t RNGxDiv) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, RNGxDiv); +} +#endif /* RNG */ + +#if defined (RCC_CCIPR_RNGSEL) +/** + * @brief Configure RNG clock source + * @rmtoll CCIPR RNGSEL LL_RCC_SetRNGClockSource + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI_DIV8 + * @arg @ref LL_RCC_RNG_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, RNGxSource); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure USB clock source + * @rmtoll CCIPR2 CK48MSEL LL_RCC_SetUSBClockSource + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_USB_CLKSOURCE_HSE + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, USBxSource); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined (FDCAN1) || defined (FDCAN2) +/** + * @brief Configure FDCAN clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_SetFDCANClockSource + * @param FDCANxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFDCANClockSource(uint32_t FDCANxSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, FDCANxSource); +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Configure ADC clock source + * @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR2 I2SxSEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S2_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR2, (I2SxSource >> 16U), (I2SxSource & 0x0000FFFFU)); +} + +#else +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR I2S1SEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, I2SxSource); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Get USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_GetUSARTClockSource + * @param USARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE + * @arg @ref LL_RCC_USART3_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx) | (USARTx << 16U)); +} + +#if defined (LPUART2) || defined (LPUART1) +/** + * @brief Get LPUARTx clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource\n + * CCIPR LPUART2SEL LL_RCC_GetLPUARTClockSource + * @param LPUARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, LPUARTx) | (LPUARTx << 16U)); +} +#endif /* LPUART2 || LPUART1 */ + +/** + * @brief Get I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_GetI2CClockSource\n + * CCIPR I2C2SEL LL_RCC_GetI2CClockSource + * @param I2Cx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @arg @ref LL_RCC_I2C2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Cx) | (I2Cx << 16U)); +} + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Get TIMx clock source + * @rmtoll CCIPR TIMxSEL LL_RCC_GetTIMClockSource + * @param TIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE + * @arg @ref LL_RCC_TIM15_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK1 + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK1 + * @endif + */ +__STATIC_INLINE uint32_t LL_RCC_GetTIMClockSource(uint32_t TIMx) +{ + return (uint32_t)((READ_BIT(RCC->CCIPR, TIMx) >> 16U) | TIMx); +} +#endif /* RCC_CCIPR_TIM1SEL || RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Get LPTIMx clock source + * @rmtoll CCIPR LPTIM1SEL LL_RCC_GetLPTIMClockSource\n + CCIPR LPTIM2SEL LL_RCC_GetLPTIMClockSource + * @param LPTIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) +{ + return (uint32_t)((READ_BIT(RCC->CCIPR, LPTIMx) >> 16U) | LPTIMx); +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined (RCC_CCIPR_CECSEL) +/** + * @brief Get CEC clock source + * @rmtoll CCIPR CECSEL LL_RCC_GetCECClockSource + * @param CECx This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, CECx)); +} +#endif /* CEC */ + +#if defined(RCC_CCIPR2_FDCANSEL) +/** + * @brief Get FDCAN clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_GetFDCANClockSource + * @param FDCANx This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetFDCANClockSource(uint32_t FDCANx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, FDCANx)); +} +#endif /* RCC_CCIPR2_FDCANSEL */ + +#if defined(RNG) +/** + * @brief Get RNGx clock source + * @rmtoll CCIPR RNGSEL LL_RCC_GetRNGClockSource + * @param RNGx This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI_DIV8 + * @arg @ref LL_RCC_RNG_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, RNGx)); +} +#endif /* RNG */ + +#if defined(RNG) +/** + * @brief Get RNGx clock division factor + * @rmtoll CCIPR RNGDIV LL_RCC_GetRNGClockDiv + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLK_DIV1 + * @arg @ref LL_RCC_RNG_CLK_DIV2 + * @arg @ref LL_RCC_RNG_CLK_DIV4 + * @arg @ref LL_RCC_RNG_CLK_DIV8 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockDiv(void) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Get USBx clock source + * @rmtoll CCIPR2 CK48MSEL LL_RCC_GetUSBClockSource + * @param USBx This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, USBx)); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Get ADCx clock source + * @rmtoll CCIPR ADCSEL LL_RCC_GetADCClockSource + * @param ADCx This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx)); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR2 I2S1SEL LL_RCC_GetI2SClockSource\n + * CCIPR2 I2S2SEL LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @arg @ref LL_RCC_I2S2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, I2Sx) | (I2Sx << 16U)); +} +#else +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR I2S1SEL LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Sx)); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)) ? 1UL : 0UL); +} + +/** + * @brief Configure PLL used for SYSCLK Domain + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLR can be written only when PLL is disabled + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLR); +} + +/** + * @brief Configure PLL used for ADC domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: I2S1) + * @note This can be selected for ADC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_ADC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} + +/** + * @brief Configure PLL used for I2S1 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: ADC) + * @note This can be selected for I2S1 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_I2S1 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S1(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Configure PLL used for I2S2 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: ADC) + * @note This can be selected for I2S2 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_I2S2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S2(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Configure PLL used for RNG domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for RNG + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_RNG + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_RNG(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Configure PLL used for FDCAN domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for FDCAN + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_FDCAN + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_FDCAN(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure PLL used for USB domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for USB + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_USB + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_USB(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Configure PLL used for TIM1 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: RNG, TIM15) + * @note This can be selected for TIM1 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_TIM1 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_TIM1(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Configure PLL used for TIM15 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: RNG, TIM1) + * @note This can be selected for TIM15 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_TIM15 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_TIM15(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ + +/** + * @brief Get Main PLL multiplication factor for VCO + * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN + * @retval Between 8 and 86 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); +} + +/** + * @brief Get Main PLL division factor for PLLP + * @note used for PLLPCLK (ADC & I2S clock) + * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); +} + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Get Main PLL division factor for PLLQ + * @note used for PLLQCLK selected for RNG, TIM1, TIM15 clock + * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); +} +#endif /* RCC_PLLQ_SUPPORT */ + +/** + * @brief Get Main PLL division factor for PLLR + * @note used for PLLCLK (system clock) + * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); +} + +/** + * @brief Configure PLL clock source + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); +} + +/** + * @brief Get Division factor for the main PLL and other PLL + * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); +} + +/** + * @brief Enable PLL output mapped on ADC domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_ADC + * @note User shall check that PLL enable is not done through + * other functions (ex: I2S1) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_ADC(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Disable PLL output mapped on ADC domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: I2S1) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_ADC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_ADC(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Enable PLL output mapped on I2S domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_I2S1 + * @note User shall check that PLL enable is not done through + * other functions (ex: ADC) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_I2S1(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Enable PLL output mapped on I2S2 domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_I2S2 + * @note User shall check that PLL enable is not done through + * other functions (ex: ADC) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_I2S2(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** + * @brief Disable PLL output mapped on I2S1 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_I2S1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_I2S1(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Disable PLL output mapped on I2S2 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_I2S2 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_I2S2(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Enable PLL output mapped on RNG domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_RNG + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_RNG(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on RNG domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_RNG + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_RNG(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Enable PLL output mapped on FDCAN domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_FDCAN + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_FDCAN(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on FDCAN domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_FDCAN + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_FDCAN(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Enable PLL output mapped on USB domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_USB + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_USB(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on USB domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_USB + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_USB(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Enable PLL output mapped on TIM1 domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_TIM1 + * @note User shall check that PLL enable is not done through + * other functions (ex: RNG, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_TIM1(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on TIM1 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_TIM1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_TIM1(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Enable PLL output mapped on TIM15 domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_TIM15 + * @note User shall check that PLL enable is not done through + * other functions (ex: RNG, TIM1) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_TIM15(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on TIM15 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG, TIM1) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_TIM15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_TIM15(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ + +/** + * @brief Enable PLL output mapped on SYSCLK domain + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_EnableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SYS(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @brief Disable PLL output mapped on SYSCLK domain + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note In order to save power, when the PLLCLK of the PLL is + * not used, Main PLL should be 0 + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_DisableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @} + */ + + + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CICR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); +} +#endif /* RCC_HSI48_SUPPORT */ +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CICR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSSC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF)) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF)) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIFR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == (RCC_CIFR_CSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Option byte reset is set or not. + * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR or POR/PDR reset is set or not. + * @rmtoll CSR PWRRSTF LL_RCC_IsActiveFlag_PWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PWRRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PWRRSTF) == (RCC_CSR_PWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == (RCC_CIER_LSIRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == (RCC_CIER_LSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == (RCC_CIER_HSIRDYIE)) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == (RCC_CIER_HSI48RDYIE)) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == (RCC_CIER_HSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIER PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLLRDYIE) == (RCC_CIER_PLLRDYIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +#if defined(LPUART1) || defined(LPUART2) +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +#endif /* LPUART1 */ +#if defined(LPTIM1) && defined(LPTIM2) +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +#endif /* LPTIM1 && LPTIM2 */ +#if defined(RNG) +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +#endif /* RNG */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); +#if defined(CEC) +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +#endif /* CEC */ +#if defined(FDCAN1) || defined(FDCAN2) +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource); +#endif /* FDCAN1 */ +uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource); +uint32_t LL_RCC_GetRTCClockFreq(void); +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rng.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rng.h new file mode 100644 index 0000000..4215417 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rng.h @@ -0,0 +1,401 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rng.h + * @author MCD Application Team + * @brief Header file of RNG LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_RNG_H +#define STM32G0xx_LL_RNG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (RNG) + +/** @defgroup RNG_LL RNG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RNG_LL_ES_Init_Struct RNG Exported Init structures + * @{ + */ + + +/** + * @brief LL RNG Init Structure Definition + */ +typedef struct +{ + uint32_t ClockErrorDetection; /*!< Clock error detection. + This parameter can be one value of @ref RNG_LL_CED. + + This parameter can be modified using unitary functions @ref LL_RNG_EnableClkErrorDetect(). */ +} LL_RNG_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Constants RNG Exported Constants + * @{ + */ + +/** @defgroup RNG_LL_CED Clock Error Detection + * @{ + */ +#define LL_RNG_CED_ENABLE 0x00000000U /*!< Clock error detection enabled */ +#define LL_RNG_CED_DISABLE RNG_CR_CED /*!< Clock error detection disabled */ +/** + * @} + */ + +/** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RNG_ReadReg function + * @{ + */ +#define LL_RNG_SR_DRDY RNG_SR_DRDY /*!< Register contains valid random data */ +#define LL_RNG_SR_CECS RNG_SR_CECS /*!< Clock error current status */ +#define LL_RNG_SR_SECS RNG_SR_SECS /*!< Seed error current status */ +#define LL_RNG_SR_CEIS RNG_SR_CEIS /*!< Clock error interrupt status */ +#define LL_RNG_SR_SEIS RNG_SR_SEIS /*!< Seed error interrupt status */ +/** + * @} + */ + +/** @defgroup RNG_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RNG_ReadReg and LL_RNG_WriteReg macros + * @{ + */ +#define LL_RNG_CR_IE RNG_CR_IE /*!< RNG Interrupt enable */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @defgroup RNG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RNG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RNG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Functions RNG Exported Functions + * @{ + */ +/** @defgroup RNG_LL_EF_Configuration RNG Configuration functions + * @{ + */ + +/** + * @brief Enable Random Number Generation + * @rmtoll CR RNGEN LL_RNG_Enable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Enable(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_RNGEN); +} + +/** + * @brief Disable Random Number Generation + * @rmtoll CR RNGEN LL_RNG_Disable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Disable(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_RNGEN); +} + +/** + * @brief Check if Random Number Generator is enabled + * @rmtoll CR RNGEN LL_RNG_IsEnabled + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabled(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_RNGEN) == (RNG_CR_RNGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Clock Error Detection + * @rmtoll CR CED LL_RNG_EnableClkErrorDetect + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableClkErrorDetect(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_CED); +} + +/** + * @brief Disable RNG Clock Error Detection + * @rmtoll CR CED LL_RNG_DisableClkErrorDetect + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableClkErrorDetect(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_CED); +} + +/** + * @brief Check if RNG Clock Error Detection is enabled + * @rmtoll CR CED LL_RNG_IsEnabledClkErrorDetect + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledClkErrorDetect(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_CED) != (RNG_CR_CED)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Indicate if the RNG Data ready Flag is set or not + * @rmtoll SR DRDY LL_RNG_IsActiveFlag_DRDY + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_DRDY) == (RNG_SR_DRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Clock Error Current Status Flag is set or not + * @rmtoll SR CECS LL_RNG_IsActiveFlag_CECS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_CECS) == (RNG_SR_CECS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Seed Error Current Status Flag is set or not + * @rmtoll SR SECS LL_RNG_IsActiveFlag_SECS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_SECS) == (RNG_SR_SECS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Clock Error Interrupt Status Flag is set or not + * @rmtoll SR CEIS LL_RNG_IsActiveFlag_CEIS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_CEIS) == (RNG_SR_CEIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Seed Error Interrupt Status Flag is set or not + * @rmtoll SR SEIS LL_RNG_IsActiveFlag_SEIS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_SEIS) == (RNG_SR_SEIS)) ? 1UL : 0UL); +} + +/** + * @brief Clear Clock Error interrupt Status (CEIS) Flag + * @rmtoll SR CEIS LL_RNG_ClearFlag_CEIS + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ClearFlag_CEIS(RNG_TypeDef *RNGx) +{ + WRITE_REG(RNGx->SR, ~RNG_SR_CEIS); +} + +/** + * @brief Clear Seed Error interrupt Status (SEIS) Flag + * @rmtoll SR SEIS LL_RNG_ClearFlag_SEIS + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ClearFlag_SEIS(RNG_TypeDef *RNGx) +{ + WRITE_REG(RNGx->SR, ~RNG_SR_SEIS); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable Random Number Generator Interrupt + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_EnableIT + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableIT(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_IE); +} + +/** + * @brief Disable Random Number Generator Interrupt + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_DisableIT + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableIT(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_IE); +} + +/** + * @brief Check if Random Number Generator Interrupt is enabled + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_IsEnabledIT + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_IE) == (RNG_CR_IE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_Data_Management Data Management + * @{ + */ + +/** + * @brief Return32-bit Random Number value + * @rmtoll DR RNDATA LL_RNG_ReadRandData32 + * @param RNGx RNG Instance + * @retval Generated 32-bit random value + */ +__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(RNG_TypeDef *RNGx) +{ + return (uint32_t)(READ_REG(RNGx->DR)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_RNG_Init(RNG_TypeDef *RNGx, LL_RNG_InitTypeDef *RNG_InitStruct); +void LL_RNG_StructInit(LL_RNG_InitTypeDef *RNG_InitStruct); +ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32G0xx_LL_RNG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rtc.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rtc.h new file mode 100644 index 0000000..a64ae79 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rtc.h @@ -0,0 +1,4216 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rtc.h + * @author MCD Application Team + * @brief Header file of RTC LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_RTC_H +#define STM32G0xx_LL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @defgroup RTC_LL RTC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_LL_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_LL_INIT_MASK 0xFFFFFFFFU +#define RTC_LL_RSF_MASK 0xFFFFFF5FU + +/* Write protection defines */ +#define RTC_WRITE_PROTECTION_DISABLE ((uint8_t)0xFFU) +#define RTC_WRITE_PROTECTION_ENABLE_1 ((uint8_t)0xCAU) +#define RTC_WRITE_PROTECTION_ENABLE_2 ((uint8_t)0x53U) + +/* Defines used to combine date & time */ +#define RTC_OFFSET_WEEKDAY (uint32_t)24U +#define RTC_OFFSET_DAY (uint32_t)16U +#define RTC_OFFSET_MONTH (uint32_t)8U +#define RTC_OFFSET_HOUR (uint32_t)16U +#define RTC_OFFSET_MINUTE (uint32_t)8U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure + * @{ + */ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hours Format. + This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetHourFormat(). */ + + uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetAsynchPrescaler(). */ + + uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetSynchPrescaler(). */ +} LL_RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetFormat(). */ + + uint8_t Hours; /*!< Specifies the RTC Time Hours. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the @ref LL_RTC_TIME_FORMAT_PM is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected. + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetHour(). */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetMinute(). */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetSecond(). */ +} LL_RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_LL_EC_WEEKDAY + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetWeekDay(). */ + + uint8_t Month; /*!< Specifies the RTC Date Month. + This parameter can be a value of @ref RTC_LL_EC_MONTH + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetMonth(). */ + + uint8_t Day; /*!< Specifies the RTC Date Day. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetDay(). */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetYear(). */ +} LL_RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK for ALARM A or @ref RTC_LL_EC_ALMB_MASK for ALARM B. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetMask() for ALARM A + or @ref LL_RTC_ALMB_SetMask() for ALARM B + */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay. + This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION for ALARM A or @ref RTC_LL_EC_ALMB_WEEKDAY_SELECTION for ALARM B + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday() + for ALARM A or @ref LL_RTC_ALMB_EnableWeekday() or @ref LL_RTC_ALMB_DisableWeekday() for ALARM B + */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay. + If AlarmDateWeekDaySel set to day, this parameter must be a number between Min_Data = 1 and Max_Data = 31. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetDay() + for ALARM A or @ref LL_RTC_ALMB_SetDay() for ALARM B. + + If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of @ref RTC_LL_EC_WEEKDAY. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetWeekDay() + for ALARM A or @ref LL_RTC_ALMB_SetWeekDay() for ALARM B. + */ +} LL_RTC_AlarmTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EC_FORMAT FORMAT + * @{ + */ +#define LL_RTC_FORMAT_BIN 0x00000000U /*!< Binary data format */ +#define LL_RTC_FORMAT_BCD 0x00000001U /*!< BCD data format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay + * @{ + */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm A Date is selected */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_WEEKDAY_SELECTION RTC Alarm B Date WeekDay + * @{ + */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm B Date is selected */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMBR_WDSEL /*!< Alarm B WeekDay is selected */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RTC_ReadReg function + * @{ + */ +#define LL_RTC_SCR_ITSF RTC_SCR_CITSF +#define LL_RTC_SCR_TSOVF RTC_SCR_CTSOVF +#define LL_RTC_SCR_TSF RTC_SCR_CTSF +#define LL_RTC_SCR_WUTF RTC_SCR_CWUTF +#define LL_RTC_SCR_ALRBF RTC_SCR_CALRBF +#define LL_RTC_SCR_ALRAF RTC_SCR_CALRAF + +#define LL_RTC_ICSR_RECALPF RTC_ICSR_RECALPF +#define LL_RTC_ICSR_INITF RTC_ICSR_INITF +#define LL_RTC_ICSR_RSF RTC_ICSR_RSF +#define LL_RTC_ICSR_INITS RTC_ICSR_INITS +#define LL_RTC_ICSR_SHPF RTC_ICSR_SHPF +#define LL_RTC_ICSR_WUTWF RTC_ICSR_WUTWF +#define LL_RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF +#define LL_RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF +/** + * @} + */ + +/** @defgroup RTC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions + * @{ + */ +#define LL_RTC_CR_TSIE RTC_CR_TSIE +#define LL_RTC_CR_WUTIE RTC_CR_WUTIE +#define LL_RTC_CR_ALRBIE RTC_CR_ALRBIE +#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY + * @{ + */ +#define LL_RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) /*!< Monday */ +#define LL_RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) /*!< Tuesday */ +#define LL_RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) /*!< Wednesday */ +#define LL_RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) /*!< Thursday */ +#define LL_RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) /*!< Friday */ +#define LL_RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) /*!< Saturday */ +#define LL_RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) /*!< Sunday */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_MONTH MONTH + * @{ + */ +#define LL_RTC_MONTH_JANUARY ((uint8_t)0x01U) /*!< January */ +#define LL_RTC_MONTH_FEBRUARY ((uint8_t)0x02U) /*!< February */ +#define LL_RTC_MONTH_MARCH ((uint8_t)0x03U) /*!< March */ +#define LL_RTC_MONTH_APRIL ((uint8_t)0x04U) /*!< April */ +#define LL_RTC_MONTH_MAY ((uint8_t)0x05U) /*!< May */ +#define LL_RTC_MONTH_JUNE ((uint8_t)0x06U) /*!< June */ +#define LL_RTC_MONTH_JULY ((uint8_t)0x07U) /*!< July */ +#define LL_RTC_MONTH_AUGUST ((uint8_t)0x08U) /*!< August */ +#define LL_RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) /*!< September */ +#define LL_RTC_MONTH_OCTOBER ((uint8_t)0x10U) /*!< October */ +#define LL_RTC_MONTH_NOVEMBER ((uint8_t)0x11U) /*!< November */ +#define LL_RTC_MONTH_DECEMBER ((uint8_t)0x12U) /*!< December */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT + * @{ + */ +#define LL_RTC_HOURFORMAT_24HOUR 0x00000000U /*!< 24 hour/day format */ +#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT + * @{ + */ +#define LL_RTC_ALARMOUT_DISABLE 0x00000000U /*!< Output disabled */ +#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */ +#define LL_RTC_ALARMOUT_ALMB RTC_CR_OSEL_1 /*!< Alarm B output enabled */ +#define LL_RTC_ALARMOUT_WAKEUP RTC_CR_OSEL /*!< Wakeup output enabled */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE + * @{ + */ +#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE /*!< RTC_ALARM is open-drain output */ +#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL 0x00000000U /*!< RTC_ALARM is push-pull output */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN + * @{ + */ +#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH 0x00000000U /*!< Pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL)*/ +#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT + * @{ + */ +#define LL_RTC_TIME_FORMAT_AM_OR_24 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND + * @{ + */ +#define LL_RTC_SHIFT_SECOND_DELAY 0x00000000U /* Delay (seconds) = SUBFS / (PREDIV_S + 1) */ +#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /* Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK + * @{ + */ +#define LL_RTC_ALMA_MASK_NONE 0x00000000U /*!< No masks applied on Alarm A*/ +#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT + * @{ + */ +#define LL_RTC_ALMA_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_MASK ALARMB MASK + * @{ + */ +#define LL_RTC_ALMB_MASK_NONE 0x00000000U /*!< No masks applied on Alarm B*/ +#define LL_RTC_ALMB_MASK_DATEWEEKDAY RTC_ALRMBR_MSK4 /*!< Date/day do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_HOURS RTC_ALRMBR_MSK3 /*!< Hours do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_MINUTES RTC_ALRMBR_MSK2 /*!< Minutes do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_SECONDS RTC_ALRMBR_MSK1 /*!< Seconds do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_ALL (RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_TIME_FORMAT ALARMB TIME FORMAT + * @{ + */ +#define LL_RTC_ALMB_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMB_TIME_FORMAT_PM RTC_ALRMBR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE + * @{ + */ +#define LL_RTC_TIMESTAMP_EDGE_RISING 0x00000000U /*!< RTC_TS input rising edge generates a time-stamp event */ +#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp even */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT + * @{ + */ +#define LL_RTC_TS_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER TAMPER + * @{ + */ +#define LL_RTC_TAMPER_1 TAMP_CR1_TAMP1E /*!< Tamper 1 input detection */ +#define LL_RTC_TAMPER_2 TAMP_CR1_TAMP2E /*!< Tamper 2 input detection */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_3 TAMP_CR1_TAMP3E /*!< Tamper 3 input detection */ +#endif +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_MASK TAMPER MASK + * @{ + */ +#define LL_RTC_TAMPER_MASK_TAMPER1 TAMP_CR2_TAMP1MSK /*!< Tamper 1 event generates a trigger event. TAMP1F is masked and internally cleared by hardware.The backup registers are not erased */ +#define LL_RTC_TAMPER_MASK_TAMPER2 TAMP_CR2_TAMP2MSK /*!< Tamper 2 event generates a trigger event. TAMP2F is masked and internally cleared by hardware. The backup registers are not erased. */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_MASK_TAMPER3 TAMP_CR2_TAMP3MSK /*!< Tamper 3 event generates a trigger event. TAMP3F is masked and internally cleared by hardware. The backup registers are not erased. */ +#endif +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_NOERASE TAMPER NO ERASE + * @{ + */ +#define LL_RTC_TAMPER_NOERASE_TAMPER1 TAMP_CR2_TAMP1NOERASE /*!< Tamper 1 event does not erase the backup registers. */ +#define LL_RTC_TAMPER_NOERASE_TAMPER2 TAMP_CR2_TAMP2NOERASE /*!< Tamper 2 event does not erase the backup registers. */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_NOERASE_TAMPER3 TAMP_CR2_TAMP3NOERASE /*!< Tamper 3 event does not erase the backup registers. */ +#endif +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_DURATION TAMPER DURATION + * @{ + */ +#define LL_RTC_TAMPER_DURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ +#define LL_RTC_TAMPER_DURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_8RTCCLK TAMP_FLTCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_FILTER TAMPER FILTER + * @{ + */ +#define LL_RTC_TAMPER_FILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ +#define LL_RTC_TAMPER_FILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level. */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_SAMPLFREQDIV TAMPER SAMPLING FREQUENCY DIVIDER + * @{ + */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_4096 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_1024 (TAMP_FLTCR_TAMPFREQ_2 | TAMP_FLTCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_512 (TAMP_FLTCR_TAMPFREQ_2 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_256 TAMP_FLTCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_ACTIVELEVEL TAMPER ACTIVE LEVEL + * @{ + */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 TAMP_CR2_TAMP1TRG /*!< Tamper 1 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 TAMP_CR2_TAMP2TRG /*!< Tamper 2 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 TAMP_CR2_TAMP3TRG /*!< Tamper 3 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#endif +/** + * @} + */ + + +/** @defgroup RTC_LL_EC_INTERNAL INTERNAL TAMPER + * @{ + */ +#define LL_RTC_TAMPER_ITAMP3 TAMP_CR1_ITAMP3E /*!< Internal tamper 3: LSE monitoring */ +#define LL_RTC_TAMPER_ITAMP4 TAMP_CR1_ITAMP4E /*!< Internal tamper 4: HSE monitoring */ +#define LL_RTC_TAMPER_ITAMP5 TAMP_CR1_ITAMP5E /*!< Internal tamper 5: RTC calendar overflow */ +#define LL_RTC_TAMPER_ITAMP6 TAMP_CR1_ITAMP6E /*!< Internal tamper 6: Test mode entry */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_BKP BACKUP + * @{ + */ +#define LL_RTC_BKP_DR0 0x00000000U +#define LL_RTC_BKP_DR1 0x00000001U +#define LL_RTC_BKP_DR2 0x00000002U +#define LL_RTC_BKP_DR3 0x00000003U +#define LL_RTC_BKP_DR4 0x00000004U +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WAKEUPCLOCK_DIV WAKEUP CLOCK DIV + * @{ + */ +#define LL_RTC_WAKEUPCLOCK_DIV_16 0x00000000U /*!< RTC/16 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_8 RTC_CR_WUCKSEL_0 /*!< RTC/8 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_4 RTC_CR_WUCKSEL_1 /*!< RTC/4 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_2 (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_0) /*!< RTC/2 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE RTC_CR_WUCKSEL_2 /*!< ck_spre (usually 1 Hz) clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE_WUT (RTC_CR_WUCKSEL_2 | RTC_CR_WUCKSEL_1) /*!< ck_spre (usually 1 Hz) clock is selected and 2exp16 is added to the WUT counter value*/ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output + * @{ + */ +#define LL_RTC_CALIB_OUTPUT_NONE 0x00000000U /*!< Calibration output disabled */ +#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 1 Hz */ +#define LL_RTC_CALIB_OUTPUT_512HZ RTC_CR_COE /*!< Calibration output is 512 Hz */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion + * @{ + */ +#define LL_RTC_CALIB_INSERTPULSE_NONE 0x00000000U /*!< No RTCCLK pulses are added */ +#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period + * @{ + */ +#define LL_RTC_CALIB_PERIOD_32SEC 0x00000000U /*!< Use a 32-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Convert Convert helper Macros + * @{ + */ + +/** + * @brief Helper macro to convert a value from 2 digit decimal format to BCD format + * @param __VALUE__ Byte to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U)) + +/** + * @brief Helper macro to convert a value from BCD format to 2 digit decimal format + * @param __VALUE__ BCD value to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)((((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U ) + ((__VALUE__) & (uint8_t)0x0FU)) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Date Date helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve weekday. + * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Year in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Year in BCD format (0x00 . . . 0x99) + */ +#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Month in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Day in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Day in BCD format (0x01 . . . 0x31) + */ +#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Time Time helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve hour in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23) + */ +#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve minute in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Minutes in BCD format (0x00. . .0x59) + */ +#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve second in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Seconds in format (0x00. . .0x59) + */ +#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set Hours format (24 hour/day or AM/PM hour format) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR FMT LL_RTC_SetHourFormat + * @param RTCx RTC Instance + * @param HourFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat) +{ + MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat); +} + +/** + * @brief Get Hours format (24 hour/day or AM/PM hour format) + * @rmtoll RTC_CR FMT LL_RTC_GetHourFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + */ +__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT)); +} + +/** + * @brief Select the flag to be routed to RTC_ALARM output + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR OSEL LL_RTC_SetAlarmOutEvent + * @param RTCx RTC Instance + * @param AlarmOutput This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput) +{ + MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput); +} + +/** + * @brief Get the flag to be routed to RTC_ALARM output + * @rmtoll RTC_CR OSEL LL_RTC_GetAlarmOutEvent + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); +} + +/** + * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @param Output This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TAMPALRM_TYPE, Output); +} + +/** + * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_TYPE)); +} + +/** + * @brief Enable initialization mode + * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR) + * and prescaler register (RTC_PRER). + * Counters are stopped and start counting from the new value when INIT is reset. + * @rmtoll RTC_ICSR INIT LL_RTC_EnableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx) +{ + /* Set the Initialization mode */ + WRITE_REG(RTCx->ICSR, RTC_LL_INIT_MASK); +} + +/** + * @brief Disable initialization mode (Free running mode) + * @rmtoll RTC_ICSR INIT LL_RTC_DisableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx) +{ + /* Exit Initialization mode */ + WRITE_REG(RTCx->ICSR, (uint32_t)~RTC_ICSR_INIT); +} + +/** + * @brief Set Output polarity (pin is low when ALRAF/ALRBF/WUTF is asserted) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR POL LL_RTC_SetOutputPolarity + * @param RTCx RTC Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity) +{ + MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity); +} + +/** + * @brief Get Output polarity + * @rmtoll RTC_CR POL LL_RTC_GetOutputPolarity + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + */ +__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL)); +} + +/** + * @brief Enable Bypass the shadow registers + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BYPSHAD LL_RTC_EnableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Disable Bypass the shadow registers + * @rmtoll RTC_CR BYPSHAD LL_RTC_DisableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Check if Shadow registers bypass is enabled or not. + * @rmtoll RTC_CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD)) ? 1UL : 0UL); +} + +/** + * @brief Enable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_EnableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableRefClock(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Disable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_DisableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableRefClock(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Set Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_SetAsynchPrescaler + * @param RTCx RTC Instance + * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Set Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_SetSynchPrescaler + * @param RTCx RTC Instance + * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler); +} + +/** + * @brief Get Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_GetAsynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7F + */ +__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Get Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_GetSynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S)); +} + +/** + * @brief Enable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_EnableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE); +} + +/** + * @brief Disable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_DisableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1); + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2); +} + +/** + * @brief Enable tamper output. + * @note When the tamper output is enabled, all external and internal tamper flags + * are ORed and routed to the TAMPALRM output. + * @rmtoll RTC_CR TAMPOE LL_RTC_EnableTamperOutput + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableTamperOutput(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPOE); +} + +/** + * @brief Disable tamper output. + * @rmtoll RTC_CR TAMPOE LL_RTC_DisableTamperOutput + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableTamperOutput(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPOE); +} + +/** + * @brief Check if tamper output is enabled or not. + * @rmtoll RTC_CR TAMPOE LL_RTC_IsTamperOutputEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsTamperOutputEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TAMPOE) == (RTC_CR_TAMPOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableAlarmPullUp(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} + +/** + * @brief Disable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableAlarmPullUp(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} + +/** + * @brief Check if internal pull-up in output mode is enabled or not. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_IsAlarmPullUpEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsAlarmPullUpEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU) == (RTC_CR_TAMPALRM_PU)) ? 1UL : 0UL); +} + +/** + * @brief Enable RTC_OUT2 output + * @note RTC_OUT2 mapping depends on both OSEL (@ref LL_RTC_SetAlarmOutEvent) + * and COE (@ref LL_RTC_CAL_SetOutputFreq) settings. + * @note RTC_OUT2 is not available ins VBAT mode. + * @rmtoll RTC_CR OUT2EN LL_RTC_EnableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableOutput2(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Disable RTC_OUT2 output + * @rmtoll RTC_CR OUT2EN LL_RTC_DisableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableOutput2(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Check if RTC_OUT2 output is enabled or not. + * @rmtoll RTC_CR OUT2EN LL_RTC_IsOutput2Enabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsOutput2Enabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_OUT2EN) == (RTC_CR_OUT2EN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Time Time + * @{ + */ + +/** + * @brief Set time format (AM/24-hour or PM notation) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_TR PM LL_RTC_TIME_SetFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat); +} + +/** + * @brief Get time format (AM or PM notation) + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @rmtoll RTC_TR PM LL_RTC_TIME_GetFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM)); +} + +/** + * @brief Set Hours in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format + * @rmtoll RTC_TR HT LL_RTC_TIME_SetHour\n + * RTC_TR HU LL_RTC_TIME_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU), + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos))); +} + +/** + * @brief Get Hours in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to + * Binary format + * @rmtoll RTC_TR HT LL_RTC_TIME_GetHour\n + * RTC_TR HU LL_RTC_TIME_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU))) >> RTC_TR_HU_Pos); +} + +/** + * @brief Set Minutes in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_TR MNT LL_RTC_TIME_SetMinute\n + * RTC_TR MNU LL_RTC_TIME_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU), + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos))); +} + +/** + * @brief Get Minutes in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD + * to Binary format + * @rmtoll RTC_TR MNT LL_RTC_TIME_GetMinute\n + * RTC_TR MNU LL_RTC_TIME_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU)))>> RTC_TR_MNU_Pos); +} + +/** + * @brief Set Seconds in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_TR ST LL_RTC_TIME_SetSecond\n + * RTC_TR SU LL_RTC_TIME_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU), + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos))); +} + +/** + * @brief Get Seconds in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD + * to Binary format + * @rmtoll RTC_TR ST LL_RTC_TIME_GetSecond\n + * RTC_TR SU LL_RTC_TIME_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU))) >> RTC_TR_SU_Pos); +} + +/** + * @brief Set time (hour, minute and second) in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note TimeFormat and Hours should follow the same format + * @rmtoll RTC_TR PM LL_RTC_TIME_Config\n + * RTC_TR HT LL_RTC_TIME_Config\n + * RTC_TR HU LL_RTC_TIME_Config\n + * RTC_TR MNT LL_RTC_TIME_Config\n + * RTC_TR MNU LL_RTC_TIME_Config\n + * RTC_TR ST LL_RTC_TIME_Config\n + * RTC_TR SU LL_RTC_TIME_Config + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | \ + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos)); + MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp); +} + +/** + * @brief Get time (hour, minute and second) in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TR HT LL_RTC_TIME_Get\n + * RTC_TR HU LL_RTC_TIME_Get\n + * RTC_TR MNT LL_RTC_TIME_Get\n + * RTC_TR MNU LL_RTC_TIME_Get\n + * RTC_TR ST LL_RTC_TIME_Get\n + * RTC_TR SU LL_RTC_TIME_Get + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx) +{ + uint32_t temp; + + temp = READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU)); + return (uint32_t)((((((temp & RTC_TR_HT) >> RTC_TR_HT_Pos) << 4U) | ((temp & RTC_TR_HU) >> RTC_TR_HU_Pos)) << RTC_OFFSET_HOUR) | \ + (((((temp & RTC_TR_MNT) >> RTC_TR_MNT_Pos) << 4U) | ((temp & RTC_TR_MNU) >> RTC_TR_MNU_Pos)) << RTC_OFFSET_MINUTE) | \ + ((((temp & RTC_TR_ST) >> RTC_TR_ST_Pos) << 4U) | ((temp & RTC_TR_SU) >> RTC_TR_SU_Pos))); +} + +/** + * @brief Memorize whether the daylight saving time change has been performed + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_EnableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Disable memorization whether the daylight saving time change has been performed. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_DisableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Check if RTC Day Light Saving stored operation has been enabled or not + * @rmtoll RTC_CR BKP LL_RTC_TIME_IsDayLightStoreEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BKP) == (RTC_CR_BKP)) ? 1UL : 0UL); +} + +/** + * @brief Subtract 1 hour (winter time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR SUB1H LL_RTC_TIME_DecHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_SUB1H); +} + +/** + * @brief Add 1 hour (summer time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ADD1H LL_RTC_TIME_IncHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ADD1H); +} + +/** + * @brief Get Sub second value in the synchronous prescaler counter. + * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through + * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar + * SubSeconds value in second fraction ratio with time unit following + * generic formula: + * ==> Seconds fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending + * (ie. SHFP=0) when PREDIV_S >= SS. + * @rmtoll RTC_SSR SS LL_RTC_TIME_GetSubSecond + * @param RTCx RTC Instance + * @retval Sub second value (number between 0 and 65535) + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS)); +} + +/** + * @brief Synchronize to a remote clock with a high degree of precision. + * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @rmtoll RTC_SHIFTR ADD1S LL_RTC_TIME_Synchronize\n + * RTC_SHIFTR SUBFS LL_RTC_TIME_Synchronize + * @param RTCx RTC Instance + * @param ShiftSecond This parameter can be one of the following values: + * @arg @ref LL_RTC_SHIFT_SECOND_DELAY + * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE + * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF) + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction) +{ + WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Date Date + * @{ + */ + +/** + * @brief Set Year in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format + * @rmtoll RTC_DR YT LL_RTC_DATE_SetYear\n + * RTC_DR YU LL_RTC_DATE_SetYear + * @param RTCx RTC Instance + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU), + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos))); +} + +/** + * @brief Get Year in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format + * @rmtoll RTC_DR YT LL_RTC_DATE_GetYear\n + * RTC_DR YU LL_RTC_DATE_GetYear + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x99 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU))) >> RTC_DR_YU_Pos); +} + +/** + * @brief Set Week day + * @rmtoll RTC_DR WDU LL_RTC_DATE_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_DR_WDU_Pos); +} + +/** + * @brief Get Week day + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @rmtoll RTC_DR WDU LL_RTC_DATE_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_DR_WDU_Pos); +} + +/** + * @brief Set Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format + * @rmtoll RTC_DR MT LL_RTC_DATE_SetMonth\n + * RTC_DR MU LL_RTC_DATE_SetMonth + * @param RTCx RTC Instance + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU), + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos))); +} + +/** + * @brief Get Month in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_DR MT LL_RTC_DATE_GetMonth\n + * RTC_DR MU LL_RTC_DATE_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU)))>> RTC_DR_MU_Pos); +} + +/** + * @brief Set Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_DR DT LL_RTC_DATE_SetDay\n + * RTC_DR DU LL_RTC_DATE_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU), + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos))); +} + +/** + * @brief Get Day in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_DR DT LL_RTC_DATE_GetDay\n + * RTC_DR DU LL_RTC_DATE_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU))) >> RTC_DR_DU_Pos); +} + +/** + * @brief Set date (WeekDay, Day, Month and Year) in BCD format + * @rmtoll RTC_DR WDU LL_RTC_DATE_Config\n + * RTC_DR MT LL_RTC_DATE_Config\n + * RTC_DR MU LL_RTC_DATE_Config\n + * RTC_DR DT LL_RTC_DATE_Config\n + * RTC_DR DU LL_RTC_DATE_Config\n + * RTC_DR YT LL_RTC_DATE_Config\n + * RTC_DR YU LL_RTC_DATE_Config + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, uint32_t WeekDay, uint32_t Day, uint32_t Month, uint32_t Year) +{ + uint32_t temp; + + temp = (WeekDay << RTC_DR_WDU_Pos) | \ + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)) | \ + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)) | \ + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos)); + + MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp); +} + +/** + * @brief Get date (WeekDay, Day, Month and Year) in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_DR WDU LL_RTC_DATE_Get\n + * RTC_DR MT LL_RTC_DATE_Get\n + * RTC_DR MU LL_RTC_DATE_Get\n + * RTC_DR DT LL_RTC_DATE_Get\n + * RTC_DR DU LL_RTC_DATE_Get\n + * RTC_DR YT LL_RTC_DATE_Get\n + * RTC_DR YU LL_RTC_DATE_Get + * @param RTCx RTC Instance + * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY). + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_Get(RTC_TypeDef *RTCx) +{ + uint32_t temp; + + temp = READ_BIT(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU)); + return (uint32_t)((((temp & RTC_DR_WDU) >> RTC_DR_WDU_Pos) << RTC_OFFSET_WEEKDAY) | \ + (((((temp & RTC_DR_DT) >> RTC_DR_DT_Pos) << 4U) | ((temp & RTC_DR_DU) >> RTC_DR_DU_Pos)) << RTC_OFFSET_DAY) | \ + (((((temp & RTC_DR_MT) >> RTC_DR_MT_Pos) << 4U) | ((temp & RTC_DR_MU) >> RTC_DR_MU_Pos)) << RTC_OFFSET_MONTH) | \ + ((((temp & RTC_DR_YT) >> RTC_DR_YT_Pos) << 4U) | ((temp & RTC_DR_YU) >> RTC_DR_YU_Pos))); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMA ALARMA + * @{ + */ + +/** + * @brief Enable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Disable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Specify the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask); +} + +/** + * @brief Get the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1)); +} + +/** + * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Disable AlarmA Week day selection (DU[3:0] represents the date ) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Set ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_SetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU), + (((Day & 0xF0U) << (RTC_ALRMAR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMAR_DU_Pos))); +} + +/** + * @brief Get ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_GetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU))) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Get ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set Alarm A time format (AM/24-hour or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat); +} + +/** + * @brief Get Alarm A time format (AM or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM)); +} + +/** + * @brief Set ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_SetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU), + (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos))); +} + +/** + * @brief Get ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU))) >> RTC_ALRMAR_HU_Pos); +} + +/** + * @brief Set ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_SetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos))); +} + +/** + * @brief Get ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_GetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU))) >> RTC_ALRMAR_MNU_Pos); +} + +/** + * @brief Set ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_SetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos))); +} + +/** + * @brief Get ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_GetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU))) >> RTC_ALRMAR_SU_Pos); +} + +/** + * @brief Set Alarm A Time (hour, minute and second) in BCD format + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | RTC_ALRMAR_ST | RTC_ALRMAR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx)); +} + +/** + * @brief Set Alarm A Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRAE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm A Mask the most-significant bits starting at this bit + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond); +} + +/** + * @brief Get Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMB ALARMB + * @{ + */ + +/** + * @brief Enable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBE LL_RTC_ALMB_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Disable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBE LL_RTC_ALMB_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Specify the Alarm B masks. + * @rmtoll RTC_ALRMBR MSK4 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK3 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK2 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK1 LL_RTC_ALMB_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1, Mask); +} + +/** + * @brief Get the Alarm B masks. + * @rmtoll RTC_ALRMBR MSK4 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK3 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK2 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK1 LL_RTC_ALMB_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1)); +} + +/** + * @brief Enable AlarmB Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll RTC_ALRMBR WDSEL LL_RTC_ALMB_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Disable AlarmB Week day selection (DU[3:0] represents the date ) + * @rmtoll RTC_ALRMBR WDSEL LL_RTC_ALMB_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Set ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_ALRMBR DT LL_RTC_ALMB_SetDay\n + * RTC_ALRMBR DU LL_RTC_ALMB_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU), + (((Day & 0xF0U) << (RTC_ALRMBR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMBR_DU_Pos))); +} + +/** + * @brief Get ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_ALRMBR DT LL_RTC_ALMB_GetDay\n + * RTC_ALRMBR DU LL_RTC_ALMB_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU))) >> RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Set ALARM B Weekday + * @rmtoll RTC_ALRMBR DU LL_RTC_ALMB_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_DU, WeekDay << RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Get ALARM B Weekday + * @rmtoll RTC_ALRMBR DU LL_RTC_ALMB_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_DU) >> RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Set ALARM B time format (AM/24-hour or PM notation) + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM, TimeFormat); +} + +/** + * @brief Get ALARM B time format (AM or PM notation) + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_PM)); +} + +/** + * @brief Set ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_SetHour\n + * RTC_ALRMBR HU LL_RTC_ALMB_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU), + (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos))); +} + +/** + * @brief Get ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_GetHour\n + * RTC_ALRMBR HU LL_RTC_ALMB_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU))) >> RTC_ALRMBR_HU_Pos); +} + +/** + * @brief Set ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_ALRMBR MNT LL_RTC_ALMB_SetMinute\n + * RTC_ALRMBR MNU LL_RTC_ALMB_SetMinute + * @param RTCx RTC Instance + * @param Minutes between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos))); +} + +/** + * @brief Get ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_ALRMBR MNT LL_RTC_ALMB_GetMinute\n + * RTC_ALRMBR MNU LL_RTC_ALMB_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU))) >> RTC_ALRMBR_MNU_Pos); +} + +/** + * @brief Set ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_ALRMBR ST LL_RTC_ALMB_SetSecond\n + * RTC_ALRMBR SU LL_RTC_ALMB_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos))); +} + +/** + * @brief Get ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_ALRMBR ST LL_RTC_ALMB_GetSecond\n + * RTC_ALRMBR SU LL_RTC_ALMB_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU))) >> RTC_ALRMBR_SU_Pos); +} + +/** + * @brief Set Alarm B Time (hour, minute and second) in BCD format + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR HT LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR HU LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR MNT LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR MNU LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR ST LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR SU LL_RTC_ALMB_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM| RTC_ALRMBR_HT | RTC_ALRMBR_HU | RTC_ALRMBR_MNT | RTC_ALRMBR_MNU | RTC_ALRMBR_ST | RTC_ALRMBR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR HU LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR MNT LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR MNU LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR ST LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR SU LL_RTC_ALMB_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMB_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMB_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMB_GetSecond(RTCx)); +} + +/** + * @brief Set Alarm B Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRBE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRMBSSR MASKSS LL_RTC_ALMB_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS, Mask << RTC_ALRMBSSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm B Mask the most-significant bits starting at this bit + * @rmtoll RTC_ALRMBSSR MASKSS LL_RTC_ALMB_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS) >> RTC_ALRMBSSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm B Sub seconds value + * @rmtoll RTC_ALRMBSSR SS LL_RTC_ALMB_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS, Subsecond); +} + +/** + * @brief Get Alarm B Sub seconds value + * @rmtoll RTC_ALRMBSSR SS LL_RTC_ALMB_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Timestamp Timestamp + * @{ + */ + +/** + * @brief Enable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_EnableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableInternalEvent(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ITSE); +} + +/** + * @brief Disable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_DisableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableInternalEvent(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ITSE); +} + +/** + * @brief Enable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSE LL_RTC_TS_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Disable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSE LL_RTC_TS_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Set Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_SetActiveEdge + * @param RTCx RTC Instance + * @param Edge This parameter can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge); +} + +/** + * @brief Get Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_GetActiveEdge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE)); +} + +/** + * @brief Get Timestamp AM/PM notation (AM or 24-hour format) + * @rmtoll RTC_TSTR PM LL_RTC_TS_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TS_TIME_FORMAT_AM + * @arg @ref LL_RTC_TS_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM)); +} + +/** + * @brief Get Timestamp Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetHour\n + * RTC_TSTR HU LL_RTC_TS_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_TSTR_HU_Pos); +} + +/** + * @brief Get Timestamp Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_TSTR MNT LL_RTC_TS_GetMinute\n + * RTC_TSTR MNU LL_RTC_TS_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_TSTR_MNU_Pos); +} + +/** + * @brief Get Timestamp Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_TSTR ST LL_RTC_TS_GetSecond\n + * RTC_TSTR SU LL_RTC_TS_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetTime\n + * RTC_TSTR HU LL_RTC_TS_GetTime\n + * RTC_TSTR MNT LL_RTC_TS_GetTime\n + * RTC_TSTR MNU LL_RTC_TS_GetTime\n + * RTC_TSTR ST LL_RTC_TS_GetTime\n + * RTC_TSTR SU LL_RTC_TS_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, + RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp Week day + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_TSDR_WDU_Pos); +} + +/** + * @brief Get Timestamp Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_TSDR MT LL_RTC_TS_GetMonth\n + * RTC_TSDR MU LL_RTC_TS_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_TSDR_MU_Pos); +} + +/** + * @brief Get Timestamp Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_TSDR DT LL_RTC_TS_GetDay\n + * RTC_TSDR DU LL_RTC_TS_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetDate\n + * RTC_TSDR MT LL_RTC_TS_GetDate\n + * RTC_TSDR MU LL_RTC_TS_GetDate\n + * RTC_TSDR DT LL_RTC_TS_GetDate\n + * RTC_TSDR DU LL_RTC_TS_GetDate + * @param RTCx RTC Instance + * @retval Combination of Weekday, Day and Month + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get time-stamp sub second value + * @rmtoll RTC_TSSSR SS LL_RTC_TS_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS)); +} + +/** + * @brief Activate timestamp on tamper detection event + * @rmtoll RTC_CR TAMPTS LL_RTC_TS_EnableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableOnTamper(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPTS); +} + +/** + * @brief Disable timestamp on tamper detection event + * @rmtoll RTC_CR TAMPTS LL_RTC_TS_DisableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPTS); +} + + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Tamper Tamper + * @{ + */ + +/** + * @brief Enable TAMPx input detection + * @rmtoll TAMP_CR1 TAMP1E LL_RTC_TAMPER_Enable\n + * TAMP_CR1 TAMP2E LL_RTC_TAMPER_Enable\n + * TAMP_CR1 TAMP3E LL_RTC_TAMPER_Enable + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_2 + * @arg @ref LL_RTC_TAMPER_3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Enable(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + SET_BIT(TAMPx->CR1, Tamper); +} + +/** + * @brief Clear TAMPx input detection + * @rmtoll TAMP_CR1 TAMP1E LL_RTC_TAMPER_Disable\n + * TAMP_CR1 TAMP2E LL_RTC_TAMPER_Disable\n + * TAMP_CR1 TAMP3E LL_RTC_TAMPER_Disable + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_2 + * @arg @ref LL_RTC_TAMPER_2 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Disable(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + CLEAR_BIT(TAMPx->CR1, Tamper); +} + +/** + * @brief Enable Tamper mask flag + * @note Associated Tamper IT must not enabled when tamper mask is set. + * @rmtoll TAMP_CR2 TAMP1MF LL_RTC_TAMPER_EnableMask\n + * TAMP_CR2 TAMP2MF LL_RTC_TAMPER_EnableMask\n + * TAMP_CR2 TAMP3MF LL_RTC_TAMPER_EnableMask + * @param TAMPx TAMP Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER2 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableMask(TAMP_TypeDef *TAMPx, uint32_t Mask) +{ + SET_BIT(TAMPx->CR2, Mask); +} + +/** + * @brief Disable Tamper mask flag + * @rmtoll TAMP_CR2 TAMP1MF LL_RTC_TAMPER_DisableMask\n + * TAMP_CR2 TAMP2MF LL_RTC_TAMPER_DisableMask\n + * TAMP_CR2 TAMP3MF LL_RTC_TAMPER_DisableMask + * @param TAMPx TAMP Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER2 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableMask(TAMP_TypeDef *TAMPx, uint32_t Mask) +{ + CLEAR_BIT(TAMPx->CR2, Mask); +} + +/** + * @brief Enable backup register erase after Tamper event detection + * @rmtoll TAMP_CR2 TAMP1NOERASE LL_RTC_TAMPER_EnableEraseBKP\n + * TAMP_CR2 TAMP2NOERASE LL_RTC_TAMPER_EnableEraseBKP\n + * TAMP_CR2 TAMP3NOERASE LL_RTC_TAMPER_EnableEraseBKP + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER2 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableEraseBKP(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + CLEAR_BIT(TAMPx->CR2, Tamper); +} + +/** + * @brief Disable backup register erase after Tamper event detection + * @rmtoll TAMP_CR2 TAMP1NOERASE LL_RTC_TAMPER_DisableEraseBKP\n + * TAMP_CR2 TAMP2NOERASE LL_RTC_TAMPER_DisableEraseBKP\n + * TAMP_CR2 TAMP3NOERASE LL_RTC_TAMPER_DisableEraseBKP + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER2 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableEraseBKP(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + SET_BIT(TAMPx->CR2, Tamper); +} + +/** + * @brief Disable RTC_TAMPx pull-up disable (Disable precharge of RTC_TAMPx pins) + * @rmtoll TAMP_FLTCR TAMPPUDIS LL_RTC_TAMPER_DisablePullUp + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisablePullUp(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPPUDIS); +} + +/** + * @brief Enable RTC_TAMPx pull-up disable ( Precharge RTC_TAMPx pins before sampling) + * @rmtoll TAMP_FLTCR TAMPPUDIS LL_RTC_TAMPER_EnablePullUp + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnablePullUp(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPPUDIS); +} + +/** + * @brief Set RTC_TAMPx precharge duration + * @rmtoll TAMP_FLTCR TAMPPRCH LL_RTC_TAMPER_SetPrecharge + * @param TAMPx TAMP Instance + * @param Duration This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetPrecharge(TAMP_TypeDef *TAMPx, uint32_t Duration) +{ + MODIFY_REG(TAMPx->FLTCR, TAMP_FLTCR_TAMPPRCH, Duration); +} + +/** + * @brief Get RTC_TAMPx precharge duration + * @rmtoll TAMP_FLTCR TAMPPRCH LL_RTC_TAMPER_GetPrecharge + * @param TAMPx TAMP Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPrecharge(TAMP_TypeDef *TAMPx) +{ + return (uint32_t)(READ_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPPRCH)); +} + +/** + * @brief Set RTC_TAMPx filter count + * @rmtoll TAMP_FLTCR TAMPFLT LL_RTC_TAMPER_SetFilterCount + * @param TAMPx TAMP Instance + * @param FilterCount This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetFilterCount(TAMP_TypeDef *TAMPx, uint32_t FilterCount) +{ + MODIFY_REG(TAMPx->FLTCR, TAMP_FLTCR_TAMPFLT, FilterCount); +} + +/** + * @brief Get RTC_TAMPx filter count + * @rmtoll TAMP_FLTCR TAMPFLT LL_RTC_TAMPER_GetFilterCount + * @param TAMPx TAMP Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetFilterCount(TAMP_TypeDef *TAMPx) +{ + return (uint32_t)(READ_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPFLT)); +} + +/** + * @brief Set Tamper sampling frequency + * @rmtoll TAMP_FLTCR TAMPFREQ LL_RTC_TAMPER_SetSamplingFreq + * @param TAMPx TAMP Instance + * @param SamplingFreq This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetSamplingFreq(TAMP_TypeDef *TAMPx, uint32_t SamplingFreq) +{ + MODIFY_REG(TAMPx->FLTCR, TAMP_FLTCR_TAMPFREQ, SamplingFreq); +} + +/** + * @brief Get Tamper sampling frequency + * @rmtoll TAMP_FLTCR TAMPFREQ LL_RTC_TAMPER_GetSamplingFreq + * @param TAMPx TAMP Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetSamplingFreq(TAMP_TypeDef *TAMPx) +{ + return (uint32_t)(READ_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPFREQ)); +} + +/** + * @brief Enable Active level for Tamper input + * @rmtoll TAMP_CR2 TAMP1TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAMP_CR2 TAMP2TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAMP_CR2 TAMP3TRG LL_RTC_TAMPER_EnableActiveLevel + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableActiveLevel(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + SET_BIT(TAMPx->CR2, Tamper); +} + +/** + * @brief Disable Active level for Tamper input + * @rmtoll TAMP_CR2 TAMP1TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAMP_CR2 TAMP2TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAMP_CR2 TAMP3TRG LL_RTC_TAMPER_DisableActiveLevel + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableActiveLevel(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + CLEAR_BIT(TAMPx->CR2, Tamper); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Internal_Tamper Internal Tamper + * @{ + */ + +/** + * @brief Enable internal tamper detection. + * @rmtoll TAMP_CR1 ITAMP3E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMP4E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMP5E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMP6E LL_RTC_TAMPER_ITAMP_Enable\n + * @param TAMPx TAMP Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ITAMP3 + * @arg @ref LL_RTC_TAMPER_ITAMP4 + * @arg @ref LL_RTC_TAMPER_ITAMP5 + * @arg @ref LL_RTC_TAMPER_ITAMP6 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_Enable(TAMP_TypeDef *TAMPx, uint32_t InternalTamper) +{ + SET_BIT(TAMPx->CR1, InternalTamper); +} + +/** + * @brief Disable internal tamper detection. + * @rmtoll TAMP_CR1 ITAMP3E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMP4E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMP5E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMP6E LL_RTC_TAMPER_ITAMP_Disable\n + * @param TAMPx TAMP Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ITAMP3 + * @arg @ref LL_RTC_TAMPER_ITAMP4 + * @arg @ref LL_RTC_TAMPER_ITAMP5 + * @arg @ref LL_RTC_TAMPER_ITAMP6 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_Disable(TAMP_TypeDef *TAMPx, uint32_t InternalTamper) +{ + CLEAR_BIT(TAMPx->CR1, InternalTamper); +} + +/** + * @} + */ + + +/** @defgroup RTC_LL_EF_Wakeup Wakeup + * @{ + */ + +/** + * @brief Enable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Disable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Check if Wakeup timer is enabled or not + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_IsEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_IsEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTE) == (RTC_CR_WUTE)) ? 1UL : 0UL); +} + +/** + * @brief Select Wakeup clock + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when WUTE bit = 0 and WUTWF bit = 1 + * @rmtoll RTC_CR WUCKSEL LL_RTC_WAKEUP_SetClock + * @param RTCx RTC Instance + * @param WakeupClock This parameter can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetClock(RTC_TypeDef *RTCx, uint32_t WakeupClock) +{ + MODIFY_REG(RTCx->CR, RTC_CR_WUCKSEL, WakeupClock); +} + +/** + * @brief Get Wakeup clock + * @rmtoll RTC_CR WUCKSEL LL_RTC_WAKEUP_GetClock + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetClock(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_WUCKSEL)); +} + +/** + * @brief Set Wakeup auto-reload value + * @note Bit can be written only when WUTWF is set to 1 + * @rmtoll RTC_WUTR WUT LL_RTC_WAKEUP_SetAutoReload + * @param RTCx RTC Instance + * @param Value Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetAutoReload(RTC_TypeDef *RTCx, uint32_t Value) +{ + MODIFY_REG(RTCx->WUTR, RTC_WUTR_WUT, Value); +} + +/** + * @brief Get Wakeup auto-reload value + * @rmtoll RTC_WUTR WUT LL_RTC_WAKEUP_GetAutoReload + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetAutoReload(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->WUTR, RTC_WUTR_WUT)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers + * @{ + */ + +/** + * @brief Writes a data in a specified Backup data register. + * @rmtoll TAMP_BKPxR BKP LL_RTC_BKP_SetRegister + * @param TAMPx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_BKP_SetRegister(TAMP_TypeDef *TAMPx, uint32_t BackupRegister, uint32_t Data) +{ + __IO uint32_t *tmp; + + tmp = &(TAMPx->BKP0R) + BackupRegister; + + /* Write the specified register */ + *tmp = Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @rmtoll TAMP_BKPxR BKP LL_RTC_BKP_GetRegister + * @param TAMPx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_BKP_GetRegister(TAMP_TypeDef *TAMPx, uint32_t BackupRegister) +{ + const __IO uint32_t *tmp; + + tmp = &(TAMPx->BKP0R) + BackupRegister; + + /* Read the specified register */ + return *tmp; +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Calibration Calibration + * @{ + */ + +/** + * @brief Set Calibration output frequency (1 Hz or 512 Hz) + * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR COE LL_RTC_CAL_SetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_SetOutputFreq + * @param RTCx RTC Instance + * @param Frequency This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency) +{ + MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency); +} + +/** + * @brief Get Calibration output frequency (1 Hz or 512 Hz) + * @rmtoll RTC_CR COE LL_RTC_CAL_GetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_GetOutputFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL)); +} + +/** + * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALP LL_RTC_CAL_SetPulse + * @param RTCx RTC Instance + * @param Pulse This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE + * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse); +} + +/** + * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm) + * @rmtoll RTC_CALR CALP LL_RTC_CAL_IsPulseInserted + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP)) ? 1UL : 0UL); +} + +/** + * @brief Set the calibration cycle period + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_SetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_SetPeriod + * @param RTCx RTC Instance + * @param Period This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period); +} + +/** + * @brief Get the calibration cycle period + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_GetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_GetPeriod + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16)); +} + +/** + * @brief Set Calibration minus + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALM LL_RTC_CAL_SetMinus + * @param RTCx RTC Instance + * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus); +} + +/** + * @brief Get Calibration minus + * @rmtoll RTC_CALR CALM LL_RTC_CAL_GetMinus + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Time-stamp flag + * @rmtoll RTC_SR ITSF LL_RTC_IsActiveFlag_ITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ITSF) == (RTC_SR_ITSF)) ? 1UL : 0UL); +} + +/** + * @brief Get Recalibration pending Flag + * @rmtoll RTC_ICSR RECALPF LL_RTC_IsActiveFlag_RECALP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RECALPF) == (RTC_ICSR_RECALPF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp overflow flag + * @rmtoll RTC_SR TSOVF LL_RTC_IsActiveFlag_TSOV + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSOVF) == (RTC_SR_TSOVF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp flag + * @rmtoll RTC_SR TSF LL_RTC_IsActiveFlag_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSF) == (RTC_SR_TSF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer flag + * @rmtoll RTC_SR WUTF LL_RTC_IsActiveFlag_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_WUTF) == (RTC_SR_WUTF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm B flag + * @rmtoll RTC_SR ALRBF LL_RTC_IsActiveFlag_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRB(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ALRBF) == (RTC_SR_ALRBF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A flag + * @rmtoll RTC_SR ALRAF LL_RTC_IsActiveFlag_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ALRAF) == (RTC_SR_ALRAF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Internal Time-stamp flag + * @rmtoll RTC_SCR CITSF LL_RTC_ClearFlag_ITS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CITSF); +} + +/** + * @brief Clear Time-stamp overflow flag + * @rmtoll RTC_SCR CTSOVF LL_RTC_ClearFlag_TSOV + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CTSOVF); +} + +/** + * @brief Clear Time-stamp flag + * @rmtoll RTC_SCR CTSF LL_RTC_ClearFlag_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CTSF); +} + +/** + * @brief Clear Wakeup timer flag + * @rmtoll RTC_SCR CWUTF LL_RTC_ClearFlag_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_WUT(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CWUTF); +} + +/** + * @brief Clear Alarm B flag + * @rmtoll RTC_SCR CALRBF LL_RTC_ClearFlag_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRB(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CALRBF); +} + +/** + * @brief Clear Alarm A flag + * @rmtoll RTC_SCR CALRAF LL_RTC_ClearFlag_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CALRAF); +} + +/** + * @brief Get Initialization flag + * @rmtoll RTC_ICSR INITF LL_RTC_IsActiveFlag_INIT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITF) == (RTC_ICSR_INITF)) ? 1UL : 0UL); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_IsActiveFlag_RS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RSF) == (RTC_ICSR_RSF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_ClearFlag_RS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ICSR, (~((RTC_ICSR_RSF | RTC_ICSR_INIT) & 0x000000FFU) | (RTCx->ICSR & RTC_ICSR_INIT))); +} + +/** + * @brief Get Initialization status flag + * @rmtoll RTC_ICSR INITS LL_RTC_IsActiveFlag_INITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITS) == (RTC_ICSR_INITS)) ? 1UL : 0UL); +} + +/** + * @brief Get Shift operation pending flag + * @rmtoll RTC_ICSR SHPF LL_RTC_IsActiveFlag_SHP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_SHPF) == (RTC_ICSR_SHPF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer write flag + * @rmtoll RTC_ICSR WUTWF LL_RTC_IsActiveFlag_WUTW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_WUTWF) == (RTC_ICSR_WUTWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm B write flag + * @rmtoll RTC_ICSR ALRBWF LL_RTC_IsActiveFlag_ALRBW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRBW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_ALRBWF) == (RTC_ICSR_ALRBWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A write flag + * @rmtoll RTC_ICSR ALRAWF LL_RTC_IsActiveFlag_ALRAW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_ALRAWF) == (RTC_ICSR_ALRAWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A masked flag. + * @rmtoll RTC_MISR ALRAMF LL_RTC_IsActiveFlag_ALRAM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ALRAMF) == (RTC_MISR_ALRAMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm B masked flag. + * @rmtoll RTC_MISR ALRBMF LL_RTC_IsActiveFlag_ALRBM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRBM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ALRBMF) == (RTC_MISR_ALRBMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer masked flag. + * @rmtoll RTC_MISR WUTMF LL_RTC_IsActiveFlag_WUTM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_WUTMF) == (RTC_MISR_WUTMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp masked flag. + * @rmtoll RTC_MISR TSMF LL_RTC_IsActiveFlag_TSM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSMF) == (RTC_MISR_TSMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp overflow masked flag. + * @rmtoll RTC_MISR TSOVMF LL_RTC_IsActiveFlag_TSOVM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOVM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSOVMF) == (RTC_MISR_TSOVMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Internal Time-stamp masked flag. + * @rmtoll RTC_MISR ITSMF LL_RTC_IsActiveFlag_ITSM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITSM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ITSMF) == (RTC_MISR_ITSMF)) ? 1UL : 0UL); +} + +/** + * @brief Get tamper 1 detection flag. + * @rmtoll TAMP_SR TAMP1F LL_RTC_IsActiveFlag_TAMP1 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_TAMP1F) == (TAMP_SR_TAMP1F)) ? 1UL : 0UL); +} + +/** + * @brief Get tamper 2 detection flag. + * @rmtoll TAMP_SR TAMP2F LL_RTC_IsActiveFlag_TAMP2 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_TAMP2F) == (TAMP_SR_TAMP2F)) ? 1UL : 0UL); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Get tamper 3 detection flag. + * @rmtoll TAMP_SR TAMP3F LL_RTC_IsActiveFlag_TAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_TAMP3F) == (TAMP_SR_TAMP3F)) ? 1UL : 0UL); +} +#endif +/** + * @brief Get internal tamper 3 detection flag. + * @rmtoll TAMP_SR ITAMP3F LL_RTC_IsActiveFlag_ITAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP3F) == (TAMP_SR_ITAMP3F)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 4 detection flag. + * @rmtoll TAMP_SR ITAMP3F LL_RTC_IsActiveFlag_ITAMP4 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP4(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP4F) == (TAMP_SR_ITAMP4F)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 5 detection flag. + * @rmtoll TAMP_SR ITAMP5F LL_RTC_IsActiveFlag_ITAMP5 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP5(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP5F) == (TAMP_SR_ITAMP5F)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 6 detection flag. + * @rmtoll TAMP_SR ITAMP6F LL_RTC_IsActiveFlag_ITAMP6 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP6(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP6F) == (TAMP_SR_ITAMP6F)) ? 1UL : 0UL); +} + + +/** + * @brief Get tamper 1 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP1MF LL_RTC_IsActiveFlag_TAMP1M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_TAMP1MF) == (TAMP_MISR_TAMP1MF)) ? 1UL : 0UL); +} + +/** + * @brief Get tamper 2 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP2MF LL_RTC_IsActiveFlag_TAMP2M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_TAMP2MF) == (TAMP_MISR_TAMP2MF)) ? 1UL : 0UL); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Get tamper 3 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP3MF LL_RTC_IsActiveFlag_TAMP3M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_TAMP3MF) == (TAMP_MISR_TAMP3MF)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Get internal tamper 3 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP3MF LL_RTC_IsActiveFlag_ITAMP3M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP3M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP3MF) == (TAMP_MISR_ITAMP3MF)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 4 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP4MF LL_RTC_IsActiveFlag_ITAMP4M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP4M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP4MF) == (TAMP_MISR_ITAMP4MF)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 5 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP5MF LL_RTC_IsActiveFlag_ITAMP5M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP5M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP5MF) == (TAMP_MISR_ITAMP5MF)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 6 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP6MF LL_RTC_IsActiveFlag_ITAMP6M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP6M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP6MF) == (TAMP_MISR_ITAMP6MF)) ? 1UL : 0UL); +} + + +/** + * @brief Clear tamper 1 detection flag. + * @rmtoll TAMP_SCR CTAMP1F LL_RTC_ClearFlag_TAMP1 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP1(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CTAMP1F); +} + +/** + * @brief Clear tamper 2 detection flag. + * @rmtoll TAMP_SCR CTAMP2F LL_RTC_ClearFlag_TAMP2 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP2(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CTAMP2F); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Clear tamper 3 detection flag. + * @rmtoll TAMP_SCR CTAMP3F LL_RTC_ClearFlag_TAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CTAMP3F); +} +#endif + +/** + * @brief Clear internal tamper 3 detection flag. + * @rmtoll TAMP_SCR CITAMP3F LL_RTC_ClearFlag_ITAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP3F); +} + +/** + * @brief Clear internal tamper 4 detection flag. + * @rmtoll TAMP_SCR CITAMP4F LL_RTC_ClearFlag_ITAMP4 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP4(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP4F); +} + +/** + * @brief Clear internal tamper 5 detection flag. + * @rmtoll TAMP_SCR CITAMP5F LL_RTC_ClearFlag_ITAMP5 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP5(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP5F); +} + +/** + * @brief Clear internal tamper 6 detection flag. + * @rmtoll TAMP_SCR CITAMP6F LL_RTC_ClearFlag_ITAMP6 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP6(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP6F); +} + + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_EnableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Disable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_DisableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Enable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTIE LL_RTC_EnableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_WUT(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Disable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTIE LL_RTC_DisableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_WUT(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Enable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBIE LL_RTC_EnableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRB(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Disable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBIE LL_RTC_DisableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRB(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Enable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_EnableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Disable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_DisableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Check if Time-stamp interrupt is enabled or not + * @rmtoll RTC_CR TSIE LL_RTC_IsEnabledIT_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Wakeup timer interrupt is enabled or not + * @rmtoll RTC_CR WUTIE LL_RTC_IsEnabledIT_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_WUT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTIE) == (RTC_CR_WUTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Alarm B interrupt is enabled or not + * @rmtoll RTC_CR ALRBIE LL_RTC_IsEnabledIT_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRB(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRBIE) == (RTC_CR_ALRBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Alarm A interrupt is enabled or not + * @rmtoll RTC_CR ALRAIE LL_RTC_IsEnabledIT_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable tamper 1 interrupt. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_EnableIT_TAMP1 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP1(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_TAMP1IE); +} + +/** + * @brief Disable tamper 1 interrupt. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_DisableIT_TAMP1 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP1(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_TAMP1IE); +} + +/** + * @brief Enable tamper 2 interrupt. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_EnableIT_TAMP2 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP2(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_TAMP2IE); +} + +/** + * @brief Disable tamper 2 interrupt. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_DisableIT_TAMP2 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP2(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_TAMP2IE); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Enable tamper 3 interrupt. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_EnableIT_TAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_TAMP3IE); +} + +/** + * @brief Disable tamper 3 interrupt. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_DisableIT_TAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP3(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_TAMP3IE); +} +#endif + +/** + * @brief Enable internal tamper 3 interrupt. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_EnableIT_ITAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP3IE); +} + +/** + * @brief Disable internal tamper 3 interrupt. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_DisableIT_ITAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP3(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP3IE); +} + +/** + * @brief Enable internal tamper 4 interrupt. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_EnableIT_ITAMP4 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP4(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP4IE); +} + +/** + * @brief Disable internal tamper 4 interrupt. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_DisableIT_ITAMP4 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP4(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP4IE); +} + +/** + * @brief Enable internal tamper 5 interrupt. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_EnableIT_ITAMP5 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP5(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP5IE); +} + +/** + * @brief Disable internal tamper 5 interrupt. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_DisableIT_ITAMP5 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP5(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP5IE); +} + +/** + * @brief Enable internal tamper 6 interrupt. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_EnableIT_ITAMP6 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP6(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP6IE); +} + +/** + * @brief Disable internal tamper 6 interrupt. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_DisableIT_ITAMP6 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP6(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP6IE); +} + + +/** + * @brief Check if tamper 1 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_IsEnabledIT_TAMP1 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP1(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_TAMP1IE) == (TAMP_IER_TAMP1IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if tamper 2 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_IsEnabledIT_TAMP2 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP2(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_TAMP2IE) == (TAMP_IER_TAMP2IE)) ? 1UL : 0UL); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Check if tamper 3 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_IsEnabledIT_TAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_TAMP3IE) == (TAMP_IER_TAMP3IE)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Check if internal tamper 3 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_IsEnabledIT_ITAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP3IE) == (TAMP_IER_ITAMP3IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if internal tamper 4 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_IsEnabledIT_ITAMP4 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP4(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP4IE) == (TAMP_IER_ITAMP4IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if internal tamper 5 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_IsEnabledIT_ITAMP5 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP5(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP5IE) == (TAMP_IER_ITAMP5IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if internal tamper 6 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_IsEnabledIT_ITAMP6 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP6(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP6IE) == (TAMP_IER_ITAMP6IE)) ? 1UL : 0UL); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct); +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct); +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_RTC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_spi.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_spi.h new file mode 100644 index 0000000..b2bdb1e --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_spi.h @@ -0,0 +1,2286 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_spi.h + * @author MCD Application Team + * @brief Header file of SPI LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_SPI_H +#define STM32G0xx_LL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (SPI1) || defined (SPI2) || defined (SPI3) + +/** @defgroup SPI_LL SPI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure + * @{ + */ + +/** + * @brief SPI Init structures definition + */ +typedef struct +{ + uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/ + + uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_LL_EC_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/ + + uint32_t DataWidth; /*!< Specifies the SPI data width. + This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/ + + uint32_t ClockPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_LL_EC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/ + + uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_LL_EC_PHASE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_LL_EC_NSS_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/ + + uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER. + @note The communication clock is derived from the master clock. The slave clock does not need to be set. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/ + + uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION. + + This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/ + + uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/ + +} LL_SPI_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_SPI_ReadReg function + * @{ + */ +#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */ +#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */ +#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */ +#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */ +#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */ +#define LL_SPI_MODE_SLAVE 0x00000000U /*!< Slave configuration */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol + * @{ + */ +#define LL_SPI_PROTOCOL_MOTOROLA 0x00000000U /*!< Motorola mode. Used as default value */ +#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_SPI_PHASE_1EDGE 0x00000000U /*!< First clock transition is the first data capture edge */ +#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_SPI_POLARITY_LOW 0x00000000U /*!< Clock to 0 when idle */ +#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler + * @{ + */ +#define LL_SPI_BAUDRATEPRESCALER_DIV2 0x00000000U /*!< BaudRate control equal to fPCLK/2 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order + * @{ + */ +#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */ +#define LL_SPI_MSB_FIRST 0x00000000U /*!< Data is transmitted/received with the MSB first */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_SPI_FULL_DUPLEX 0x00000000U /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */ +#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */ +#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */ +#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode + * @{ + */ +#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */ +#define LL_SPI_NSS_HARD_INPUT 0x00000000U /*!< NSS pin used in Input. Only used in Master mode */ +#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_SPI_DATAWIDTH_4BIT (SPI_CR2_DS_0 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 4 bits */ +#define LL_SPI_DATAWIDTH_5BIT (SPI_CR2_DS_2) /*!< Data length for SPI transfer: 5 bits */ +#define LL_SPI_DATAWIDTH_6BIT (SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 6 bits */ +#define LL_SPI_DATAWIDTH_7BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 7 bits */ +#define LL_SPI_DATAWIDTH_8BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 8 bits */ +#define LL_SPI_DATAWIDTH_9BIT (SPI_CR2_DS_3) /*!< Data length for SPI transfer: 9 bits */ +#define LL_SPI_DATAWIDTH_10BIT (SPI_CR2_DS_3 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 10 bits */ +#define LL_SPI_DATAWIDTH_11BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 11 bits */ +#define LL_SPI_DATAWIDTH_12BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 12 bits */ +#define LL_SPI_DATAWIDTH_13BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2) /*!< Data length for SPI transfer: 13 bits */ +#define LL_SPI_DATAWIDTH_14BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 14 bits */ +#define LL_SPI_DATAWIDTH_15BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 15 bits */ +#define LL_SPI_DATAWIDTH_16BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 16 bits */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation + * @{ + */ +#define LL_SPI_CRCCALCULATION_DISABLE 0x00000000U /*!< CRC calculation disabled */ +#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup SPI_LL_EC_CRC_LENGTH CRC Length + * @{ + */ +#define LL_SPI_CRC_8BIT 0x00000000U /*!< 8-bit CRC length */ +#define LL_SPI_CRC_16BIT (SPI_CR1_CRCL) /*!< 16-bit CRC length */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO_TH RX FIFO Threshold + * @{ + */ +#define LL_SPI_RX_FIFO_TH_HALF 0x00000000U /*!< RXNE event is generated if FIFO level is greater than or equal to 1/2 (16-bit) */ +#define LL_SPI_RX_FIFO_TH_QUARTER (SPI_CR2_FRXTH) /*!< RXNE event is generated if FIFO level is greater than or equal to 1/4 (8-bit) */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO RX FIFO Level + * @{ + */ +#define LL_SPI_RX_FIFO_EMPTY 0x00000000U /*!< FIFO reception empty */ +#define LL_SPI_RX_FIFO_QUARTER_FULL (SPI_SR_FRLVL_0) /*!< FIFO reception 1/4 */ +#define LL_SPI_RX_FIFO_HALF_FULL (SPI_SR_FRLVL_1) /*!< FIFO reception 1/2 */ +#define LL_SPI_RX_FIFO_FULL (SPI_SR_FRLVL_1 | SPI_SR_FRLVL_0) /*!< FIFO reception full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TX_FIFO TX FIFO Level + * @{ + */ +#define LL_SPI_TX_FIFO_EMPTY 0x00000000U /*!< FIFO transmission empty */ +#define LL_SPI_TX_FIFO_QUARTER_FULL (SPI_SR_FTLVL_0) /*!< FIFO transmission 1/4 */ +#define LL_SPI_TX_FIFO_HALF_FULL (SPI_SR_FTLVL_1) /*!< FIFO transmission 1/2 */ +#define LL_SPI_TX_FIFO_FULL (SPI_SR_FTLVL_1 | SPI_SR_FTLVL_0) /*!< FIFO transmission full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DMA_PARITY DMA Parity + * @{ + */ +#define LL_SPI_DMA_PARITY_EVEN 0x00000000U /*!< Select DMA parity Even */ +#define LL_SPI_DMA_PARITY_ODD 0x00000001U /*!< Select DMA parity Odd */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable SPI peripheral + * @rmtoll CR1 SPE LL_SPI_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable SPI peripheral + * @note When disabling the SPI, follow the procedure described in the Reference Manual. + * @rmtoll CR1 SPE LL_SPI_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Check if SPI peripheral is enabled + * @rmtoll CR1 SPE LL_SPI_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)) ? 1UL : 0UL); +} + +/** + * @brief Set SPI operation mode to Master or Slave + * @note This bit should not be changed when communication is ongoing. + * @rmtoll CR1 MSTR LL_SPI_SetMode\n + * CR1 SSI LL_SPI_SetMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode); +} + +/** + * @brief Get SPI operation mode (Master or Slave) + * @rmtoll CR1 MSTR LL_SPI_GetMode\n + * CR1 SSI LL_SPI_GetMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI)); +} + +/** + * @brief Set serial protocol used + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR2 FRF LL_SPI_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard); +} + +/** + * @brief Get serial protocol used + * @rmtoll CR2 FRF LL_SPI_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + */ +__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF)); +} + +/** + * @brief Set clock phase + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPHA LL_SPI_SetClockPhase + * @param SPIx SPI Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase); +} + +/** + * @brief Get clock phase + * @rmtoll CR1 CPHA LL_SPI_GetClockPhase + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA)); +} + +/** + * @brief Set clock polarity + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPOL LL_SPI_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity); +} + +/** + * @brief Get clock polarity + * @rmtoll CR1 CPOL LL_SPI_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL)); +} + +/** + * @brief Set baud rate prescaler + * @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler. + * @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler + * @param SPIx SPI Instance + * @param BaudRate This parameter can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate); +} + +/** + * @brief Get baud rate prescaler + * @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR)); +} + +/** + * @brief Set transfer bit order + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder); +} + +/** + * @brief Get transfer bit order + * @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST)); +} + +/** + * @brief Set transfer direction mode + * @note For Half-Duplex mode, Rx Direction is set by default. + * In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex. + * @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n + * CR1 BIDIMODE LL_SPI_SetTransferDirection\n + * CR1 BIDIOE LL_SPI_SetTransferDirection + * @param SPIx SPI Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection); +} + +/** + * @brief Get transfer direction mode + * @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n + * CR1 BIDIMODE LL_SPI_GetTransferDirection\n + * CR1 BIDIOE LL_SPI_GetTransferDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE)); +} + +/** + * @brief Set frame data width + * @rmtoll CR2 DS LL_SPI_SetDataWidth + * @param SPIx SPI Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_DS, DataWidth); +} + +/** + * @brief Get frame data width + * @rmtoll CR2 DS LL_SPI_GetDataWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_DS)); +} + +/** + * @brief Set threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_SetRxFIFOThreshold + * @param SPIx SPI Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetRxFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRXTH, Threshold); +} + +/** + * @brief Get threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_GetRxFIFOThreshold + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOThreshold(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRXTH)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_CRC_Management CRC Management + * @{ + */ + +/** + * @brief Enable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_EnableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Disable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_DisableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Check if CRC is enabled + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set CRC Length + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCL LL_SPI_SetCRCWidth + * @param SPIx SPI Instance + * @param CRCLength This parameter can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCWidth(SPI_TypeDef *SPIx, uint32_t CRCLength) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CRCL, CRCLength); +} + +/** + * @brief Get CRC Length + * @rmtoll CR1 CRCL LL_SPI_GetCRCWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CRCL)); +} + +/** + * @brief Set CRCNext to transfer CRC on the line + * @note This bit has to be written as soon as the last data is written in the SPIx_DR register. + * @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT); +} + +/** + * @brief Set polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial + * @param SPIx SPI Instance + * @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly) +{ + WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly); +} + +/** + * @brief Get polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->CRCPR)); +} + +/** + * @brief Get Rx CRC + * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->RXCRCR)); +} + +/** + * @brief Get Tx CRC + * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->TXCRCR)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management + * @{ + */ + +/** + * @brief Set NSS mode + * @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode. + * @rmtoll CR1 SSM LL_SPI_SetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_SetNSSMode + * @param SPIx SPI Instance + * @param NSS This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS); + MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U))); +} + +/** + * @brief Get NSS mode + * @rmtoll CR1 SSM LL_SPI_GetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_GetNSSMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx) +{ + uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); + uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); + return (Ssm | Ssoe); +} + +/** + * @brief Enable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_EnableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Disable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_DisableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Check if NSS pulse is enabled + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_IsEnabledNSSPulse + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledNSSPulse(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_NSSP) == (SPI_CR2_NSSP)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Get CRC error flag + * @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR)) ? 1UL : 0UL); +} + +/** + * @brief Get mode fault error flag + * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)) ? 1UL : 0UL); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get busy flag + * @note The BSY flag is cleared under any one of the following conditions: + * -When the SPI is correctly disabled + * -When a fault is detected in Master mode (MODF bit set to 1) + * -In Master mode, when it finishes a data transmission and no new data is ready to be + * sent + * -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between + * each data transfer. + * @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)) ? 1UL : 0UL); +} + +/** + * @brief Get FIFO reception Level + * @rmtoll SR FRLVL LL_SPI_GetRxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_EMPTY + * @arg @ref LL_SPI_RX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_RX_FIFO_HALF_FULL + * @arg @ref LL_SPI_RX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FRLVL)); +} + +/** + * @brief Get FIFO Transmission Level + * @rmtoll SR FTLVL LL_SPI_GetTxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_TX_FIFO_EMPTY + * @arg @ref LL_SPI_TX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_TX_FIFO_HALF_FULL + * @arg @ref LL_SPI_TX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FTLVL)); +} + +/** + * @brief Clear CRC error flag + * @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR); +} + +/** + * @brief Clear mode fault error flag + * @note Clearing this flag is done by a read access to the SPIx_SR + * register followed by a write access to the SPIx_CR1 register + * @rmtoll SR MODF LL_SPI_ClearFlag_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg_sr; + tmpreg_sr = SPIx->SR; + (void) tmpreg_sr; + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Clear overrun error flag + * @note Clearing this flag is done by a read access to the SPIx_DR + * register followed by a read access to the SPIx_SR register + * @rmtoll SR OVR LL_SPI_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->DR; + (void) tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @brief Clear frame format error flag + * @note Clearing this flag is done by reading SPIx_SR register + * @rmtoll SR FRE LL_SPI_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Enable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Enable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Disable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Disable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Disable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Check if error interrupt is enabled + * @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx buffer not empty interrupt is enabled + * @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set parity of Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_SetDMAParity_RX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_RX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMARX, (Parity << SPI_CR2_LDMARX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_GetDMAParity_RX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_RX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMARX) >> SPI_CR2_LDMARX_Pos); +} + +/** + * @brief Set parity of Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_SetDMAParity_TX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_TX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMATX, (Parity << SPI_CR2_LDMATX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_GetDMAParity_TX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_TX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMATX) >> SPI_CR2_LDMATX_Pos); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_SPI_DMA_GetRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) +{ + return (uint32_t) &(SPIx->DR); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief Read 8-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData8 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) +{ + return (uint8_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Read 16-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx) +{ + return (uint16_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Write 8-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData8 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) +{ +#if defined (__GNUC__) + __IO uint8_t *spidr = ((__IO uint8_t *)&SPIx->DR); + *spidr = TxData; +#else + *((__IO uint8_t *)&SPIx->DR) = TxData; +#endif /* __GNUC__ */ +} + +/** + * @brief Write 16-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ +#if defined (__GNUC__) + __IO uint16_t *spidr = ((__IO uint16_t *)&SPIx->DR); + *spidr = TxData; +#else + SPIx->DR = TxData; +#endif /* __GNUC__ */ +} + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct); +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** + * @} + */ + +#if defined(SPI_I2S_SUPPORT) +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity + and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2S_ReadReg function + * @{ + */ +#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */ +#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */ +#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */ +#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel length 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel length 32bit */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */ +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2s Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */ +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */ +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */ +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */ +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */ +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */ +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */ +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */ +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * I2SCFGR I2SE LL_I2S_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Disable I2S peripheral + * @rmtoll I2SCFGR I2SE LL_I2S_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Check if I2S peripheral is enabled + * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)) ? 1UL : 0UL); +} + +/** + * @brief Set I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat + * @param SPIx SPI Instance + * @param DataFormat This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat); +} + +/** + * @brief Get I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)); +} + +/** + * @brief Set I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + SET_BIT(SPIx->I2SCFGR, ClockPolarity); +} + +/** + * @brief Get I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode); +} + +/** + * @brief Get I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV)); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U); +} + +/** + * @brief Enable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Disable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Check if the master clock output (Pin MCK) is enabled + * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL); +} + +#if defined(SPI_I2SCFGR_ASTRTEN) +/** + * @brief Enable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Disable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Check if asynchronous start is enabled + * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL); +} +#endif /* SPI_I2SCFGR_ASTRTEN */ + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_FLAG FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXNE(SPIx); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXE(SPIx); +} + +/** + * @brief Get busy flag + * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_BSY(SPIx); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Get channel side flag. + * @note 0: Channel Left has to be transmitted or has been received\n + * 1: Channel Right has to be transmitted or has been received\n + * It has no significance in PCM mode. + * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)) ? 1UL : 0UL); +} + +/** + * @brief Clear overrun error flag + * @rmtoll SR OVR LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear underrun error flag + * @rmtoll SR UDR LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void)tmpreg; +} + +/** + * @brief Clear frame format error flag + * @rmtoll SR FRE LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT Interrupt Management + * @{ + */ + +/** + * @brief Enable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_ERR(SPIx); +} + +/** + * @brief Enable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXNE(SPIx); +} + +/** + * @brief Enable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXE(SPIx); +} + +/** + * @brief Disable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_ERR(SPIx); +} + +/** + * @brief Disable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXNE(SPIx); +} + +/** + * @brief Disable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXE(SPIx); +} + +/** + * @brief Check if ERR IT is enabled + * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_ERR(SPIx); +} + +/** + * @brief Check if RXNE IT is enabled + * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXNE(SPIx); +} + +/** + * @brief Check if TXE IT is enabled + * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA DATA Management + * @{ + */ + +/** + * @brief Read 16-Bits in data register + * @rmtoll DR DR LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Write 16-Bits in data register + * @rmtoll DR DR LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_SPI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h new file mode 100644 index 0000000..bec06f8 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h @@ -0,0 +1,2084 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBG registers + (+) Access to SYSCFG registers + (+) Access to VREFBUF registers + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_SYSTEM_H +#define STM32G0xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBG) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP + * @{ + */ +#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x00000000 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_PIN_RMP SYSCFG PIN RMP + * @{ + */ +#define LL_SYSCFG_PIN_RMP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves as PA9 pin */ +#define LL_SYSCFG_PIN_RMP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves as PA10 pin */ +/** + * @} + */ + + +#if defined(SYSCFG_CFGR1_IR_MOD) +/** @defgroup SYSTEM_LL_EC_IR_MOD SYSCFG IR Modulation + * @{ + */ +#define LL_SYSCFG_IR_MOD_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IRDA Modulation enveloppe source */ +#define LL_SYSCFG_IR_MOD_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IRDA Modulation enveloppe source */ +#if defined(USART4) +#define LL_SYSCFG_IR_MOD_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IRDA Modulation enveloppe source */ +#else +#define LL_SYSCFG_IR_MOD_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IRDA Modulation enveloppe source */ +#endif /* USART4 */ +/** + * @} + */ +/** @defgroup SYSTEM_LL_EC_IR_POL SYSCFG IR Polarity + * @{ + */ +#define LL_SYSCFG_IR_POL_NOT_INVERTED 0x00000000U /*!< 0: Output of IRDA (IROut) not inverted */ +#define LL_SYSCFG_IR_POL_INVERTED (SYSCFG_CFGR1_IR_POL) /*!< 1: Output of IRDA (IROut) inverted */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_IR_MOD */ + +#if defined(SYSCFG_CFGR1_BOOSTEN) +/** @defgroup SYSTEM_LL_EC_BOOSTEN SYSCFG I/O analog switch voltage booster enable + * @{ + */ +#define LL_SYSCFG_CFGR1_BOOSTEN SYSCFG_CFGR1_BOOSTEN /*!< I/O analog switch voltage booster enable */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_BOOSTEN */ + +#if defined(SYSCFG_CFGR1_UCPD1_STROBE) || defined(SYSCFG_CFGR1_UCPD2_STROBE) +/** @defgroup SYSTEM_LL_EC_UCPD_DBATTDIS SYSCFG UCPD Dead Battery feature Disable + * @{ + */ +#define LL_SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 STROBE sw configuration */ +#define LL_SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 STROBE sw configuration */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_UCPD1_STROBE) || SYSCFG_CFGR1_UCPD2_STROBE */ + +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< I2C PB6 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< I2C PB7 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< I2C PB8 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< I2C PB9 Fast mode plus */ +#if defined(SYSCFG_CFGR1_I2C1_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable I2C1 Fast mode Plus */ +#endif /*SYSCFG_CFGR1_I2C1_FMP*/ +#if defined(SYSCFG_CFGR1_I2C2_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable I2C2 Fast mode plus */ +#endif /*SYSCFG_CFGR1_I2C2_FMP*/ +#if defined(SYSCFG_CFGR1_I2C_PA9_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#endif /*SYSCFG_CFGR1_I2C_PA9_FMP*/ +#if defined(SYSCFG_CFGR1_I2C_PA10_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#endif /*SYSCFG_CFGR1_I2C_PA10_FMP*/ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#if defined(SYSCFG_CFGR1_I2C3_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable I2C3 Fast mode plus */ +#endif /*SYSCFG_CFGR1_I2C3_FMP*/ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#define LL_SYSCFG_TIMBREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal + with Break Input of TIM1/15/16/17 */ +#if defined (PWR_PVD_SUPPORT) +#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection + with TIM1/15/16/17 Break Input and also + the PVDE and PLS bits of the Power Control Interface */ +#endif /* PWR_PVD_SUPPORT */ +#define LL_SYSCFG_TIMBREAK_SRAM_PARITY SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal + with Break Input of TIM1/15/16/17 */ +#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP (Hardfault) output of + CortexM0 with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @defgroup SYSTEM_LL_EC_CLAMPING_DIODE SYSCFG CLAMPING DIODE + * @{ + */ +#define LL_SYSCFG_CFGR2_PA1_CDEN SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping diode of PA1 */ +#define LL_SYSCFG_CFGR2_PA3_CDEN SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping diode of PA3 */ +#define LL_SYSCFG_CFGR2_PA5_CDEN SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping diode of PA5 */ +#define LL_SYSCFG_CFGR2_PA6_CDEN SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping diode of PA6 */ +#define LL_SYSCFG_CFGR2_PA13_CDEN SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping diode of PA13 */ +#define LL_SYSCFG_CFGR2_PB0_CDEN SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping diode of PB0 */ +#define LL_SYSCFG_CFGR2_PB1_CDEN SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping diode of PB1 */ +#define LL_SYSCFG_CFGR2_PB2_CDEN SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping diode of PB2 */ +/** + * @} + */ +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#if defined(DBG_APB_FZ1_DBG_TIM2_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBG_APB_FZ1_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ +#endif /*DBG_APB_FZ1_DBG_TIM2_STOP*/ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBG_APB_FZ1_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBG_APB_FZ1_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +#if defined(DBG_APB_FZ1_DBG_TIM6_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBG_APB_FZ1_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ +#endif /*DBG_APB_FZ1_DBG_TIM6_STOP*/ +#if defined(DBG_APB_FZ1_DBG_TIM7_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBG_APB_FZ1_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ +#endif /*DBG_APB_FZ1_DBG_TIM7_STOP*/ +#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBG_APB_FZ1_DBG_RTC_STOP /*!< RTC Calendar frozen when core is halted */ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBG_APB_FZ1_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBG_APB_FZ1_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +#if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define LL_DBGMCU_APB1_GRP1_LPTIM2_STOP DBG_APB_FZ1_DBG_LPTIM2_STOP /*!< LPTIM2 counter stopped when Core is halted */ +#endif /* DBG_APB_FZ1_DBG_LPTIM2_STOP */ +#if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBG_APB_FZ1_DBG_LPTIM1_STOP /*!< LPTIM1 counter stopped when Core is halted */ +#endif /* DBG_APB_FZ1_DBG_LPTIM1_STOP */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBG_APB_FZ2_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ +#if defined(DBG_APB_FZ2_DBG_TIM14_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM14_STOP DBG_APB_FZ2_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ +#endif /* DBG_APB_FZ2_DBG_TIM14_STOP */ +#if defined(DBG_APB_FZ2_DBG_TIM15_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBG_APB_FZ2_DBG_TIM15_STOP /*!< TIM15 counter stopped when core is halted */ +#endif /*DBG_APB_FZ2_DBG_TIM15_STOP*/ +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBG_APB_FZ2_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBG_APB_FZ2_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */ +/** + * @} + */ + + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EC_VOLTAGE VREFBUF VOLTAGE + * @{ + */ +#define LL_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define LL_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1 (VREF_OUT2) */ +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ +#define LL_FLASH_LATENCY_3 (FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) /*!< FLASH Three wait states */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ + +/** + * @brief Set memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_SetRemapMemory + * @param Memory This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)); +} + +/** + * @brief Enable remap of a pin on different pad + * @rmtoll SYSCFG_CFGR1 PA11_RMP LL_SYSCFG_EnablePinRemap\n + * SYSCFG_CFGR1 PA12_RMP LL_SYSCFG_EnablePinRemap\n + * @param PinRemap This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_PIN_RMP_PA11 + * @arg @ref LL_SYSCFG_PIN_RMP_PA12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnablePinRemap(uint32_t PinRemap) +{ + SET_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Enable remap of a pin on different pad + * @rmtoll SYSCFG_CFGR1 PA11_RMP LL_SYSCFG_DisablePinRemap\n + * SYSCFG_CFGR1 PA12_RMP LL_SYSCFG_DisablePinRemap\n + * @param PinRemap This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_PIN_RMP_PA11 + * @arg @ref LL_SYSCFG_PIN_RMP_PA12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisablePinRemap(uint32_t PinRemap) +{ + CLEAR_BIT(SYSCFG->CFGR1, PinRemap); +} + +#if defined(SYSCFG_CFGR1_IR_MOD) +/** + * @brief Set IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_SetIRModEnvelopeSignal + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART4 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetIRModEnvelopeSignal(uint32_t Source) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD, Source); +} + +/** + * @brief Get IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_GetIRModEnvelopeSignal + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART4 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIRModEnvelopeSignal(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD)); +} + +/** + * @brief Set IR Output polarity. + * @rmtoll SYSCFG_CFGR1 IR_POL LL_SYSCFG_SetIRPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_IR_POL_INVERTED + * @arg @ref LL_SYSCFG_IR_POL_NOT_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetIRPolarity(uint32_t Polarity) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL, Polarity); +} + +/** + * @brief Get IR Output polarity. + * @rmtoll SYSCFG_CFGR1 IR_POL LL_SYSCFG_GetIRPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IR_POL_INVERTED + * @arg @ref LL_SYSCFG_IR_POL_NOT_INVERTED + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIRPolarity(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL)); +} +#endif /* SYSCFG_CFGR1_IR_MOD */ + +#if defined(SYSCFG_CFGR1_BOOSTEN) +/** + * @brief Enable I/O analog switch voltage booster. + * @note When voltage booster is enabled, I/O analog switches are supplied + * by a dedicated voltage booster, from VDD power domain. This is + * the recommended configuration with low VDDA voltage operation. + * @note The I/O analog switch voltage booster is relevant for peripherals + * using I/O in analog input: ADC, COMP. + * However, COMP and OPAMP inputs have a high impedance and + * voltage booster do not impact performance significantly. + * Therefore, the voltage booster is mainly intended for + * usage with ADC. + * @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_EnableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableAnalogBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable I/O analog switch voltage booster. + * @note When voltage booster is enabled, I/O analog switches are supplied + * by a dedicated voltage booster, from VDD power domain. This is + * the recommended configuration with low VDDA voltage operation. + * @note The I/O analog switch voltage booster is relevant for peripherals + * using I/O in analog input: ADC, COMP. + * However, COMP and OPAMP inputs have a high impedance and + * voltage booster do not impact performance significantly. + * Therefore, the voltage booster is mainly intended for + * usage with ADC. + * @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_DisableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableAnalogBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} +#endif /* SYSCFG_CFGR1_BOOSTEN */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C3 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C3 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_DisableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +#if defined(SYSCFG_CFGR1_UCPD1_STROBE) || defined(SYSCFG_CFGR1_UCPD2_STROBE) +/** + * @brief Disable dead battery behavior + * @rmtoll SYSCFG_CFGR1 UCPD1_STROBE LL_SYSCFG_DisableDBATT\n + * SYSCFG_CFGR1 UCPD2_STROBE LL_SYSCFG_DisableDBATT + * @param ConfigDeadBattery This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_UCPD1_STROBE\n + * @arg @ref LL_SYSCFG_UCPD2_STROBE + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableDBATT(uint32_t ConfigDeadBattery) +{ + SET_BIT(SYSCFG->CFGR1, ConfigDeadBattery); +} +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ + +#if defined(SYSCFG_ITLINE0_SR_EWDG) +/** + * @brief Check if Window watchdog interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE0 SR_EWDG LL_SYSCFG_IsActiveFlag_WWDG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_WWDG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[0], SYSCFG_ITLINE0_SR_EWDG) == (SYSCFG_ITLINE0_SR_EWDG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE0_SR_EWDG */ + +#if defined (PWR_PVD_SUPPORT) +/** + * @brief Check if PVD supply monitoring interrupt occurred or not (EXTI line 16). + * @rmtoll SYSCFG_ITLINE1 SR_PVDOUT LL_SYSCFG_IsActiveFlag_PVDOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_PVDOUT(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_PVDOUT) == (SYSCFG_ITLINE1_SR_PVDOUT)) ? 1UL : 0UL); +} +#endif /* PWR_PVD_SUPPORT */ + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Check if VDDUSB supply monitoring interrupt occurred or not (EXTI line 34). + * @rmtoll SYSCFG_ITLINE1 SR_PVMOUT LL_SYSCFG_IsActiveFlag_PVMOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_PVMOUT(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_PVMOUT) == (SYSCFG_ITLINE1_SR_PVMOUT)) ? 1UL : 0UL); +} +#endif /* PWR_PVM_SUPPORT */ + +#if defined(SYSCFG_ITLINE2_SR_RTC) +/** + * @brief Check if RTC Wake Up interrupt occurred or not (EXTI line 19). + * @rmtoll SYSCFG_ITLINE2 SR_RTC_WAKEUP LL_SYSCFG_IsActiveFlag_RTC_WAKEUP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_WAKEUP(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC) == (SYSCFG_ITLINE2_SR_RTC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE2_SR_RTC */ + +#if defined(SYSCFG_ITLINE2_SR_TAMPER) +/** + * @brief Check if RTC Tamper and TimeStamp interrupt occurred or not (EXTI line 21). + * @rmtoll SYSCFG_ITLINE2 SR_TAMPER LL_SYSCFG_IsActiveFlag_TAMPER + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TAMPER(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_TAMPER) == (SYSCFG_ITLINE2_SR_TAMPER)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE2_SR_TAMPER */ + +#if defined(SYSCFG_ITLINE3_SR_FLASH_ITF) +/** + * @brief Check if Flash interface interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE3 SR_FLASH_ITF LL_SYSCFG_IsActiveFlag_FLASH_ITF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FLASH_ITF(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[3], SYSCFG_ITLINE3_SR_FLASH_ITF) == (SYSCFG_ITLINE3_SR_FLASH_ITF)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE3_SR_FLASH_ITF */ + +#if defined(SYSCFG_ITLINE3_SR_FLASH_ECC) +/** + * @brief Check if Flash interface interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE3 SR_FLASH_ECC LL_SYSCFG_IsActiveFlag_FLASH_ECC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FLASH_ECC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[3], SYSCFG_ITLINE3_SR_FLASH_ECC) == (SYSCFG_ITLINE3_SR_FLASH_ECC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE3_SR_FLASH_ECC */ + +#if defined(SYSCFG_ITLINE4_SR_CLK_CTRL) +/** + * @brief Check if Reset and clock control interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE4 SR_CLK_CTRL LL_SYSCFG_IsActiveFlag_CLK_CTRL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CLK_CTRL(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CLK_CTRL) == (SYSCFG_ITLINE4_SR_CLK_CTRL)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE4_SR_CLK_CTRL */ + +#if defined(CRS) +/** + * @brief Check if Reset and clock control interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE4 SR_CRS LL_SYSCFG_IsActiveFlag_CRS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CRS(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CRS) == (SYSCFG_ITLINE4_SR_CRS)) ? 1UL : 0UL); +} +#endif /* CRS */ +#if defined(SYSCFG_ITLINE5_SR_EXTI0) +/** + * @brief Check if EXTI line 0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI0 LL_SYSCFG_IsActiveFlag_EXTI0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI0(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI0) == (SYSCFG_ITLINE5_SR_EXTI0)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI0 */ + +#if defined(SYSCFG_ITLINE5_SR_EXTI1) +/** + * @brief Check if EXTI line 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI1 LL_SYSCFG_IsActiveFlag_EXTI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI1) == (SYSCFG_ITLINE5_SR_EXTI1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI1 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI2) +/** + * @brief Check if EXTI line 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI2 LL_SYSCFG_IsActiveFlag_EXTI2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI2) == (SYSCFG_ITLINE6_SR_EXTI2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI2 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI3) +/** + * @brief Check if EXTI line 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI3 LL_SYSCFG_IsActiveFlag_EXTI3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI3) == (SYSCFG_ITLINE6_SR_EXTI3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI3 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI4) +/** + * @brief Check if EXTI line 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI4 LL_SYSCFG_IsActiveFlag_EXTI4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI4) == (SYSCFG_ITLINE7_SR_EXTI4)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI4 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI5) +/** + * @brief Check if EXTI line 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI5 LL_SYSCFG_IsActiveFlag_EXTI5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI5) == (SYSCFG_ITLINE7_SR_EXTI5)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI5 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI6) +/** + * @brief Check if EXTI line 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI6 LL_SYSCFG_IsActiveFlag_EXTI6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI6) == (SYSCFG_ITLINE7_SR_EXTI6)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI6 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI7) +/** + * @brief Check if EXTI line 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI7 LL_SYSCFG_IsActiveFlag_EXTI7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI7(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI7) == (SYSCFG_ITLINE7_SR_EXTI7)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI7 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI8) +/** + * @brief Check if EXTI line 8 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI8 LL_SYSCFG_IsActiveFlag_EXTI8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI8(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI8) == (SYSCFG_ITLINE7_SR_EXTI8)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI8 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI9) +/** + * @brief Check if EXTI line 9 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI9 LL_SYSCFG_IsActiveFlag_EXTI9 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI9(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI9) == (SYSCFG_ITLINE7_SR_EXTI9)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI9 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI10) +/** + * @brief Check if EXTI line 10 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI10 LL_SYSCFG_IsActiveFlag_EXTI10 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI10(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI10) == (SYSCFG_ITLINE7_SR_EXTI10)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI10 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI11) +/** + * @brief Check if EXTI line 11 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI11 LL_SYSCFG_IsActiveFlag_EXTI11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI11(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI11) == (SYSCFG_ITLINE7_SR_EXTI11)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI11 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI12) +/** + * @brief Check if EXTI line 12 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI12 LL_SYSCFG_IsActiveFlag_EXTI12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI12(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI12) == (SYSCFG_ITLINE7_SR_EXTI12)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI12 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI13) +/** + * @brief Check if EXTI line 13 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI13 LL_SYSCFG_IsActiveFlag_EXTI13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI13(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI13) == (SYSCFG_ITLINE7_SR_EXTI13)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI13 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI14) +/** + * @brief Check if EXTI line 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI14 LL_SYSCFG_IsActiveFlag_EXTI14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI14(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI14) == (SYSCFG_ITLINE7_SR_EXTI14)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI14 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI15) +/** + * @brief Check if EXTI line 15 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI15 LL_SYSCFG_IsActiveFlag_EXTI15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI15(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI15) == (SYSCFG_ITLINE7_SR_EXTI15)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI15 */ + +#if defined(SYSCFG_ITLINE8_SR_UCPD1) +/** + * @brief Check if UCPD1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_UCPD1 LL_SYSCFG_IsActiveFlag_UCPD1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_UCPD1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_UCPD1) == (SYSCFG_ITLINE8_SR_UCPD1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE8_SR_UCPD1 */ + +#if defined(SYSCFG_ITLINE8_SR_UCPD2) +/** + * @brief Check if UCPD2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_UCPD2 LL_SYSCFG_IsActiveFlag_UCPD2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_UCPD2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_UCPD2) == (SYSCFG_ITLINE8_SR_UCPD2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE8_SR_UCPD2 */ + +#if defined(SYSCFG_ITLINE8_SR_USB) +/** + * @brief Check if USB interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_USB LL_SYSCFG_IsActiveFlag_USB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USB(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_USB) == (SYSCFG_ITLINE8_SR_USB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE8_SR_USB */ + +#if defined(SYSCFG_ITLINE9_SR_DMA1_CH1) +/** + * @brief Check if DMA1 channel 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE9 SR_DMA1_CH1 LL_SYSCFG_IsActiveFlag_DMA1_CH1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[9], SYSCFG_ITLINE9_SR_DMA1_CH1) == (SYSCFG_ITLINE9_SR_DMA1_CH1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE9_SR_DMA1_CH1 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH2) +/** + * @brief Check if DMA1 channel 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH2 LL_SYSCFG_IsActiveFlag_DMA1_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH2) == (SYSCFG_ITLINE10_SR_DMA1_CH2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH2 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH3) +/** + * @brief Check if DMA1 channel 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH3 LL_SYSCFG_IsActiveFlag_DMA1_CH3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH3) == (SYSCFG_ITLINE10_SR_DMA1_CH3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH3 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH4) +/** + * @brief Check if DMA1 channel 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH4 LL_SYSCFG_IsActiveFlag_DMA1_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH4) == (SYSCFG_ITLINE11_SR_DMA1_CH4)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH4 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH5) +/** + * @brief Check if DMA1 channel 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH5 LL_SYSCFG_IsActiveFlag_DMA1_CH5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH5) == (SYSCFG_ITLINE11_SR_DMA1_CH5)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH5 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH6) +/** + * @brief Check if DMA1 channel 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH6 LL_SYSCFG_IsActiveFlag_DMA1_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH6) == (SYSCFG_ITLINE11_SR_DMA1_CH6)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH6 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH7) +/** + * @brief Check if DMA1 channel 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH7 LL_SYSCFG_IsActiveFlag_DMA1_CH7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH7(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH7) == (SYSCFG_ITLINE11_SR_DMA1_CH7)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH7 */ + +#if defined(SYSCFG_ITLINE11_SR_DMAMUX1) +/** + * @brief Check if DMAMUX interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMAMUX1 LL_SYSCFG_IsActiveFlag_DMAMUX + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMAMUX(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMAMUX1) == (SYSCFG_ITLINE11_SR_DMAMUX1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMAMUX */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH1) +/** + * @brief Check if DMA2_CH1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH1 LL_SYSCFG_IsActiveFlag_DMA2_CH1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH1) == (SYSCFG_ITLINE11_SR_DMA2_CH1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH1 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH2) +/** + * @brief Check if DMA2_CH2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH2 LL_SYSCFG_IsActiveFlag_DMA2_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH2) == (SYSCFG_ITLINE11_SR_DMA2_CH2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH2 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH3) +/** + * @brief Check if DMA2_CH3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH3 LL_SYSCFG_IsActiveFlag_DMA2_CH3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH3) == (SYSCFG_ITLINE11_SR_DMA2_CH3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH3 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH4) +/** + * @brief Check if DMA2_CH4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH4 LL_SYSCFG_IsActiveFlag_DMA2_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH4) == (SYSCFG_ITLINE11_SR_DMA2_CH4)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH4 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH5) +/** + * @brief Check if DMA2_CH5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH5 LL_SYSCFG_IsActiveFlag_DMA2_CH5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH5) == (SYSCFG_ITLINE11_SR_DMA2_CH5)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH5 */ + +#if defined(SYSCFG_ITLINE12_SR_ADC) +/** + * @brief Check if ADC interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE12 SR_ADC LL_SYSCFG_IsActiveFlag_ADC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_ADC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_ADC) == (SYSCFG_ITLINE12_SR_ADC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_ADC */ + +#if defined(SYSCFG_ITLINE12_SR_COMP1) +/** + * @brief Check if Comparator 1 interrupt occurred or not (EXTI line 21). + * @rmtoll SYSCFG_ITLINE12 SR_COMP1 LL_SYSCFG_IsActiveFlag_COMP1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP1) == (SYSCFG_ITLINE12_SR_COMP1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_COMP1 */ + +#if defined(SYSCFG_ITLINE12_SR_COMP2) +/** + * @brief Check if Comparator 2 interrupt occurred or not (EXTI line 22). + * @rmtoll SYSCFG_ITLINE12 SR_COMP2 LL_SYSCFG_IsActiveFlag_COMP2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP2) == (SYSCFG_ITLINE12_SR_COMP2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_COMP2 */ + +#if defined(SYSCFG_ITLINE12_SR_COMP3) +/** + * @brief Check if Comparator 3 interrupt occurred or not (EXTI line 20). + * @rmtoll SYSCFG_ITLINE12 SR_COMP3 LL_SYSCFG_IsActiveFlag_COMP3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP3) == (SYSCFG_ITLINE12_SR_COMP3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_COMP3 */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_BRK) +/** + * @brief Check if Timer 1 break interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_BRK LL_SYSCFG_IsActiveFlag_TIM1_BRK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_BRK(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_BRK) == (SYSCFG_ITLINE13_SR_TIM1_BRK)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_BRK */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_UPD) +/** + * @brief Check if Timer 1 update interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_UPD LL_SYSCFG_IsActiveFlag_TIM1_UPD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_UPD(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_UPD) == (SYSCFG_ITLINE13_SR_TIM1_UPD)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_UPD */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_TRG) +/** + * @brief Check if Timer 1 trigger interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_TRG LL_SYSCFG_IsActiveFlag_TIM1_TRG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_TRG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_TRG) == (SYSCFG_ITLINE13_SR_TIM1_TRG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_TRG */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_CCU) +/** + * @brief Check if Timer 1 commutation interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_CCU LL_SYSCFG_IsActiveFlag_TIM1_CCU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CCU(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_CCU) == (SYSCFG_ITLINE13_SR_TIM1_CCU)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_CCU */ + +#if defined(SYSCFG_ITLINE14_SR_TIM1_CC) +/** + * @brief Check if Timer 1 capture compare interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE14 SR_TIM1_CC LL_SYSCFG_IsActiveFlag_TIM1_CC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[14], SYSCFG_ITLINE14_SR_TIM1_CC) == (SYSCFG_ITLINE14_SR_TIM1_CC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE14_SR_TIM1_CC */ + +#if defined(SYSCFG_ITLINE15_SR_TIM2_GLB) +/** + * @brief Check if Timer 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE15 SR_TIM2_GLB LL_SYSCFG_IsActiveFlag_TIM2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[15], SYSCFG_ITLINE15_SR_TIM2_GLB) == (SYSCFG_ITLINE15_SR_TIM2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE15_SR_TIM2_GLB */ + +#if defined(SYSCFG_ITLINE16_SR_TIM3_GLB) +/** + * @brief Check if Timer 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE16 SR_TIM3_GLB LL_SYSCFG_IsActiveFlag_TIM3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[16], SYSCFG_ITLINE16_SR_TIM3_GLB) == (SYSCFG_ITLINE16_SR_TIM3_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE16_SR_TIM3_GLB */ + +#if defined(SYSCFG_ITLINE16_SR_TIM4_GLB) +/** + * @brief Check if Timer 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE16 SR_TIM4_GLB LL_SYSCFG_IsActiveFlag_TIM4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[16], SYSCFG_ITLINE16_SR_TIM4_GLB) == (SYSCFG_ITLINE16_SR_TIM4_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE16_SR_TIM4_GLB */ + +#if defined(SYSCFG_ITLINE17_SR_DAC) +/** + * @brief Check if DAC underrun interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_DAC LL_SYSCFG_IsActiveFlag_DAC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DAC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_DAC) == (SYSCFG_ITLINE17_SR_DAC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE17_SR_DAC */ + +#if defined(SYSCFG_ITLINE17_SR_TIM6_GLB) +/** + * @brief Check if Timer 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_TIM6_GLB LL_SYSCFG_IsActiveFlag_TIM6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_TIM6_GLB) == (SYSCFG_ITLINE17_SR_TIM6_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE17_SR_TIM6_GLB */ + +#if defined(SYSCFG_ITLINE17_SR_LPTIM1_GLB) +/** + * @brief Check if LPTIM1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_LPTIM1_GLB LL_SYSCFG_IsActiveFlag_LPTIM1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPTIM1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_LPTIM1_GLB) == (SYSCFG_ITLINE17_SR_LPTIM1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE17_SR_LPTIM1_GLB */ + +#if defined(SYSCFG_ITLINE18_SR_TIM7_GLB) +/** + * @brief Check if Timer 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE18 SR_TIM7_GLB LL_SYSCFG_IsActiveFlag_TIM7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM7(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[18], SYSCFG_ITLINE18_SR_TIM7_GLB) == (SYSCFG_ITLINE18_SR_TIM7_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE18_SR_TIM7_GLB */ + +#if defined(SYSCFG_ITLINE18_SR_LPTIM2_GLB) +/** + * @brief Check if LPTIM2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE18 SR_LPTIM2_GLB LL_SYSCFG_IsActiveFlag_LPTIM2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPTIM2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[18], SYSCFG_ITLINE18_SR_LPTIM2_GLB) == (SYSCFG_ITLINE18_SR_LPTIM2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE18_SR_LPTIM2_GLB */ + +#if defined(SYSCFG_ITLINE19_SR_TIM14_GLB) +/** + * @brief Check if Timer 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE19 SR_TIM14_GLB LL_SYSCFG_IsActiveFlag_TIM14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM14(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[19], SYSCFG_ITLINE19_SR_TIM14_GLB) == (SYSCFG_ITLINE19_SR_TIM14_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE19_SR_TIM14_GLB */ + +#if defined(SYSCFG_ITLINE20_SR_TIM15_GLB) +/** + * @brief Check if Timer 15 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE20 SR_TIM15_GLB LL_SYSCFG_IsActiveFlag_TIM15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM15(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[20], SYSCFG_ITLINE20_SR_TIM15_GLB) == (SYSCFG_ITLINE20_SR_TIM15_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE20_SR_TIM15_GLB */ + +#if defined(SYSCFG_ITLINE21_SR_TIM16_GLB) +/** + * @brief Check if Timer 16 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_TIM16_GLB LL_SYSCFG_IsActiveFlag_TIM16 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM16(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_TIM16_GLB) == (SYSCFG_ITLINE21_SR_TIM16_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE21_SR_TIM16_GLB */ + +#if defined(SYSCFG_ITLINE21_SR_FDCAN1_IT0) +/** + * @brief Check if FDCAN1_IT0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_FDCAN1_IT0 LL_SYSCFG_IsActiveFlag_FDCAN1_IT0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN1_IT0(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_FDCAN1_IT0) == (SYSCFG_ITLINE21_SR_FDCAN1_IT0)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE21_SR_FDCAN1_IT0 */ +#if defined(SYSCFG_ITLINE21_SR_FDCAN2_IT0) +/** + * @brief Check if FDCAN2_IT0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_FDCAN2_IT0 LL_SYSCFG_IsActiveFlag_FDCAN2_IT0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN2_IT0(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_FDCAN2_IT0) == (SYSCFG_ITLINE21_SR_FDCAN2_IT0)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE21_SR_FDCAN2_IT0 */ + +#if defined(SYSCFG_ITLINE22_SR_TIM17_GLB) +/** + * @brief Check if Timer 17 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_TIM17_GLB LL_SYSCFG_IsActiveFlag_TIM17 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM17(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_TIM17_GLB) == (SYSCFG_ITLINE22_SR_TIM17_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE22_SR_TIM17_GLB */ + +#if defined(SYSCFG_ITLINE22_SR_FDCAN1_IT1) +/** + * @brief Check if FDCAN1_IT1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_FDCAN1_IT1 LL_SYSCFG_IsActiveFlag_FDCAN1_IT1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN1_IT1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_FDCAN1_IT1) == (SYSCFG_ITLINE22_SR_FDCAN1_IT1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE22_SR_FDCAN1_IT1 */ +#if defined(SYSCFG_ITLINE22_SR_FDCAN2_IT1) +/** + * @brief Check if FDCAN2_IT1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_FDCAN2_IT1 LL_SYSCFG_IsActiveFlag_FDCAN2_IT1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN2_IT1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_FDCAN2_IT1) == (SYSCFG_ITLINE22_SR_FDCAN2_IT1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE22_SR_FDCAN2_IT1 */ + +#if defined(SYSCFG_ITLINE23_SR_I2C1_GLB) +/** + * @brief Check if I2C1 interrupt occurred or not, combined with EXTI line 23. + * @rmtoll SYSCFG_ITLINE23 SR_I2C1_GLB LL_SYSCFG_IsActiveFlag_I2C1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[23], SYSCFG_ITLINE23_SR_I2C1_GLB) == (SYSCFG_ITLINE23_SR_I2C1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE23_SR_I2C1_GLB */ + +#if defined(SYSCFG_ITLINE24_SR_I2C2_GLB) +/** + * @brief Check if I2C2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE24 SR_I2C2_GLB LL_SYSCFG_IsActiveFlag_I2C2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[24], SYSCFG_ITLINE24_SR_I2C2_GLB) == (SYSCFG_ITLINE24_SR_I2C2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE24_SR_I2C2_GLB */ + +#if defined(SYSCFG_ITLINE24_SR_I2C3_GLB) +/** + * @brief Check if I2C3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE24 SR_I2C3_GLB LL_SYSCFG_IsActiveFlag_I2C3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[24], SYSCFG_ITLINE24_SR_I2C3_GLB) == (SYSCFG_ITLINE24_SR_I2C3_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE24_SR_I2C3_GLB */ + +#if defined(SYSCFG_ITLINE25_SR_SPI1) +/** + * @brief Check if SPI1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE25 SR_SPI1 LL_SYSCFG_IsActiveFlag_SPI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[25], SYSCFG_ITLINE25_SR_SPI1) == (SYSCFG_ITLINE25_SR_SPI1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE25_SR_SPI1 */ + +#if defined(SYSCFG_ITLINE26_SR_SPI2) +/** + * @brief Check if SPI2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE26 SR_SPI2 LL_SYSCFG_IsActiveFlag_SPI2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[26], SYSCFG_ITLINE26_SR_SPI2) == (SYSCFG_ITLINE26_SR_SPI2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE26_SR_SPI2 */ + +#if defined(SYSCFG_ITLINE26_SR_SPI3) +/** + * @brief Check if SPI3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE26 SR_SPI3 LL_SYSCFG_IsActiveFlag_SPI3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[26], SYSCFG_ITLINE26_SR_SPI3) == (SYSCFG_ITLINE26_SR_SPI3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE26_SR_SPI3 */ + +#if defined(SYSCFG_ITLINE27_SR_USART1_GLB) +/** + * @brief Check if USART1 interrupt occurred or not, combined with EXTI line 25. + * @rmtoll SYSCFG_ITLINE27 SR_USART1_GLB LL_SYSCFG_IsActiveFlag_USART1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[27], SYSCFG_ITLINE27_SR_USART1_GLB) == (SYSCFG_ITLINE27_SR_USART1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE27_SR_USART1_GLB */ + +#if defined(SYSCFG_ITLINE28_SR_USART2_GLB) +/** + * @brief Check if USART2 interrupt occurred or not, combined with EXTI line 26. + * @rmtoll SYSCFG_ITLINE28 SR_USART2_GLB LL_SYSCFG_IsActiveFlag_USART2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[28], SYSCFG_ITLINE28_SR_USART2_GLB) == (SYSCFG_ITLINE28_SR_USART2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE28_SR_USART2_GLB */ + +#if defined(SYSCFG_ITLINE28_SR_LPUART2_GLB) +/** + * @brief Check if LPUART2 interrupt occurred or not, combined with EXTI line 26. + * @rmtoll SYSCFG_ITLINE28 SR_LPUART2_GLB LL_SYSCFG_IsActiveFlag_LPUART2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPUART2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[28], SYSCFG_ITLINE28_SR_LPUART2_GLB) == (SYSCFG_ITLINE28_SR_LPUART2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE28_SR_LPUART2_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART3_GLB) +/** + * @brief Check if USART3 interrupt occurred or not, combined with EXTI line 28. + * @rmtoll SYSCFG_ITLINE29 SR_USART3_GLB LL_SYSCFG_IsActiveFlag_USART3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART3_GLB) == (SYSCFG_ITLINE29_SR_USART3_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART3_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART4_GLB) +/** + * @brief Check if USART4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART4_GLB LL_SYSCFG_IsActiveFlag_USART4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART4_GLB) == (SYSCFG_ITLINE29_SR_USART4_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART4_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_LPUART1_GLB) +/** + * @brief Check if LPUART1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_LPUART1_GLB LL_SYSCFG_IsActiveFlag_LPUART1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPUART1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_LPUART1_GLB) == (SYSCFG_ITLINE29_SR_LPUART1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_LPUART1_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART5_GLB) +/** + * @brief Check if USART5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART5_GLB LL_SYSCFG_IsActiveFlag_USART5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART5_GLB) == (SYSCFG_ITLINE29_SR_USART5_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART5_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART6_GLB) +/** + * @brief Check if USART6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART6_GLB LL_SYSCFG_IsActiveFlag_USART6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART6_GLB) == (SYSCFG_ITLINE29_SR_USART6_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART6_GLB */ + +#if defined(SYSCFG_ITLINE30_SR_CEC) +/** + * @brief Check if CEC interrupt occurred or not, combined with EXTI line 27. + * @rmtoll SYSCFG_ITLINE30 SR_CEC LL_SYSCFG_IsActiveFlag_CEC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CEC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[30], SYSCFG_ITLINE30_SR_CEC) == (SYSCFG_ITLINE30_SR_CEC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE30_SR_CEC */ + +#if defined(SYSCFG_ITLINE31_SR_AES) +/** + * @brief Check if AES interrupt occurred or not + * @rmtoll SYSCFG_ITLINE31 SR_AES LL_SYSCFG_IsActiveFlag_AES + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_AES(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[31], SYSCFG_ITLINE31_SR_AES) == (SYSCFG_ITLINE31_SR_AES)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE31_SR_AES */ + +#if defined(SYSCFG_ITLINE31_SR_RNG) +/** + * @brief Check if RNG interrupt occurred or not, combined with EXTI line 31. + * @rmtoll SYSCFG_ITLINE31 SR_RNG LL_SYSCFG_IsActiveFlag_RNG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RNG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[31], SYSCFG_ITLINE31_SR_RNG) == (SYSCFG_ITLINE31_SR_RNG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE31_SR_RNG */ + +/** + * @brief Set connections to TIM1/15/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 SPL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 PVDL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 ECCL LL_SYSCFG_GetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @ifnot STM32G070xx + * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*) + * @endif + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_ECC + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ +#if defined(SYSCFG_CFGR2_PVDL) + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL, Break); +#else + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_ECCL, Break); +#endif /*SYSCFG_CFGR2_PVDL*/ +} + +/** + * @brief Get connections to TIM1/15/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 SPL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 PVDL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 ECCL LL_SYSCFG_GetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @ifnot STM32G070xx + * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*) + * @endif + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_ECC + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ +#if defined(SYSCFG_CFGR2_PVDL) + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL)); +#else + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_ECCL)); +#endif /*SYSCFG_CFGR2_PVDL*/ +} + +/** + * @brief Check if SRAM parity error detected + * @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_IsActiveFlag_SP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void) +{ + return ((READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) == (SYSCFG_CFGR2_SPF)) ? 1UL : 0UL); +} + +/** + * @brief Clear SRAM parity error flag + * @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_ClearFlag_SP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void) +{ + SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF); +} + +#if defined(SYSCFG_CDEN_SUPPORT) +/** + * @brief Enable Clamping Diode on specific pin + * @rmtoll SYSCFG_CFGR2 PA1_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA3_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA5_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA6_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA13_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PB0_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PB1_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR1 PB2_CDEN LL_SYSCFG_EnableClampingDiode + * @param ConfigClampingDiode This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_CFGR2_PA1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA3_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA5_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA6_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA13_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB0_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB2_CDEN + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableClampingDiode(uint32_t ConfigClampingDiode) +{ + SET_BIT(SYSCFG->CFGR2, ConfigClampingDiode); +} + +/** + * @brief Disable Clamping Diode on specific pin + * @rmtoll SYSCFG_CFGR2 PA1_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA3_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA5_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA6_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA13_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PB0_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PB1_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR1 PB2_CDEN LL_SYSCFG_DisableClampingDiode + * @param ConfigClampingDiode This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_CFGR2_PA1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA3_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA5_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA6_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA13_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB0_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB2_CDEN + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableClampingDiode(uint32_t ConfigClampingDiode) +{ + CLEAR_BIT(SYSCFG->CFGR2, ConfigClampingDiode); +} +/** + * @brief Indicates whether clamping diode(s) is(are) enabled. + * @rmtoll SYSCFG_CFGR2 PA1_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA3_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA5_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA6_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA13_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PB0_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PB1_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR1 PB2_CDEN LL_SYSCFG_IsEnabledClampingDiode + * @param ConfigClampingDiode This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_CFGR2_PA1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA3_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA5_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA6_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA13_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB0_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB2_CDEN + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledClampingDiode(uint32_t ConfigClampingDiode) +{ + return ((READ_BIT(SYSCFG->CFGR2, ConfigClampingDiode) == (ConfigClampingDiode)) ? 1UL : 0UL); +} +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @note For STM32G081xx devices, the device ID is 0x460 + * @rmtoll DBG_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBG->IDCODE, DBG_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + * @rmtoll DBG_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBG->IDCODE, DBG_IDCODE_REV_ID) >> DBG_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBG_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBG_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBG_APB_FZ1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_I2C1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_I2C2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBG->APBFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBG_APB_FZ1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBG->APBFZ1, Periphs); +} + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBG_APB_FZ2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM14_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBG->APBFZ2, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBG_APB_FZ2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM14_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBG->APBFZ2, Periphs); +} +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EF_VREFBUF VREFBUF + * @{ + */ + +/** + * @brief Enable Internal voltage reference + * @rmtoll VREFBUF_CSR VREFBUF_CSR_ENVR LL_VREFBUF_Enable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Enable(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Disable Internal voltage reference + * @rmtoll VREFBUF_CSR VREFBUF_CSR_ENVR LL_VREFBUF_Disable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Disable(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Enable high impedance (VREF+pin is high impedance) + * @rmtoll VREFBUF_CSR VREFBUF_CSR_HIZ LL_VREFBUF_EnableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_EnableHIZ(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Disable high impedance (VREF+pin is internally connected to the voltage reference buffer output) + * @rmtoll VREFBUF_CSR VREFBUF_CSR_HIZ LL_VREFBUF_DisableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_DisableHIZ(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Set the Voltage reference scale + * @rmtoll VREFBUF_CSR VREFBUF_CSR_VRS LL_VREFBUF_SetVoltageScaling + * @param Scale This parameter can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetVoltageScaling(uint32_t Scale) +{ + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, Scale); +} + +/** + * @brief Get the Voltage reference scale + * @rmtoll VREFBUF_CSR VREFBUF_CSR_VRS LL_VREFBUF_GetVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRS)); +} + +/** + * @brief Check if Voltage reference buffer is ready + * @rmtoll VREFBUF_CSR VREFBUF_CSR_VRS LL_VREFBUF_IsVREFReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_VREFBUF_IsVREFReady(void) +{ + return ((READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == (VREFBUF_CSR_VRR)) ? 1UL : 0UL); +} + +/** + * @brief Get the trimming code for VREFBUF calibration + * @rmtoll VREFBUF_CCR VREFBUF_CCR_TRIM LL_VREFBUF_GetTrimming + * @retval Between 0 and 0x3F + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetTrimming(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CCR, VREFBUF_CCR_TRIM)); +} + +/** + * @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage) + * @note VrefBuf voltage scale is calibrated in production for each device, + * using voltage scale 1. This calibration value is loaded + * as default trimming value at device power up. + * This trimming value can be fine tuned for voltage scales 0 and 1 + * using this function. + * @rmtoll VREFBUF_CCR VREFBUF_CCR_TRIM LL_VREFBUF_SetTrimming + * @param Value Between 0 and 0x3F + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetTrimming(uint32_t Value) +{ + WRITE_REG(VREFBUF->CCR, Value); +} + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Disable Prefetch + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return ((READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Instruction cache + * @rmtoll FLASH_ACR FLASH_ACR_ICEN LL_FLASH_EnableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCache(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Disable Instruction cache + * @rmtoll FLASH_ACR FLASH_ACR_ICEN LL_FLASH_DisableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCache(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Enable Instruction cache reset + * @note bit can be written only when the instruction cache is disabled + * @rmtoll FLASH_ACR FLASH_ACR_ICRST LL_FLASH_EnableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @brief Disable Instruction cache reset + * @rmtoll FLASH_ACR FLASH_ACR_ICRST LL_FLASH_DisableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBG) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_SYSTEM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_tim.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_tim.h new file mode 100644 index 0000000..ed9ab9f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_tim.h @@ -0,0 +1,5192 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32G0xx_LL_TIM_H +#define __STM32G0xx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) || defined (TIM6) || defined (TIM7) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U, /* 6: TIMx_CH4 */ + 0x3CU, /* 7: TIMx_CH5 */ + 0x3CU /* 8: TIMx_CH6 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U, /* 6: OC4M, OC4FE, OC4PE */ + 0U, /* 7: OC5M, OC5FE, OC5PE */ + 8U /* 8: OC6M, OC6FE, OC6PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U, /* 6: CC4S, IC4PSC, IC4F */ + 0U, /* 7: - NA */ + 0U /* 8: - NA */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U, /* 6: CC4P */ + 16U, /* 7: CC5P */ + 20U /* 8: CC6P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U, /* 6: OIS4 */ + 8U, /* 7: OIS5 */ + 10U /* 8: OIS6 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + +/* Defines used for the bit position in the register and perform offsets */ +#if defined(COMP3) +#define TIM_POSITION_BRK_SOURCE \ + ((Source == LL_TIM_BKIN_SOURCE_BKIN) ? 0U :\ + (Source == LL_TIM_BKIN_SOURCE_BKCOMP1) ? 1U :\ + (Source == LL_TIM_BKIN_SOURCE_BKCOMP2) ? 2U :3U) +#else +#define TIM_POSITION_BRK_SOURCE ((Source >> 1U) & 0x1FUL) +#endif + +/* Generic bit definitions for TIMx_AF1 register */ +#define TIMx_AF1_BKINP TIM1_AF1_BKINP /*!< BRK BKIN input polarity */ +#define TIMx_AF1_ETRSEL TIM1_AF1_ETRSEL /*!< TIMx ETR source selection */ + + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + +/** Legacy definitions for compatibility purpose +@cond 0 + */ +/** +@endcond + */ + +#define OCREF_CLEAR_SELECT_Pos (16U) +#define OCREF_CLEAR_SELECT_Msk (0x1U << OCREF_CLEAR_SELECT_Pos) /*!< 0x00010000 */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH4) ? 6U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH5) ? 7U : 8U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + +/** + * @brief TIM Hall sensor interface configuration structure definition. + */ +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + Prescaler must be set to get a maximum counter period longer than the + time interval between 2 consecutive changes on the Hall inputs. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ + + uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. + A positive pulse (TRGO event) is generated with a programmable delay every time + a change occurs on the Hall inputs. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/ +} LL_TIM_HALLSENSOR_InitTypeDef; + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register + has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t BreakFilter; /*!< Specifies the TIM Break Filter. + This parameter can be a value of @ref TIM_LL_EC_BREAK_FILTER + + This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input. + This parameter can be a value of @ref TIM_LL_EC_BREAK_AFMODE + + This feature can be modified afterwards using unitary functions @ref LL_TIM_ConfigBRK() + + @note Bidirectional break input is only supported by advanced timers instances. + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t Break2State; /*!< Specifies whether the TIM Break2 input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_ENABLE + + This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t Break2Polarity; /*!< Specifies the TIM Break2 Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t Break2Filter; /*!< Specifies the TIM Break2 Filter. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_FILTER + + This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_AFMODE + + This feature can be modified afterwards using unitary functions @ref LL_TIM_ConfigBRK2() + + @note Bidirectional break input is only supported by advanced timers instances. + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_CC5IF TIM_SR_CC5IF /*!< Capture/compare 5 interrupt flag */ +#define LL_TIM_SR_CC6IF TIM_SR_CC6IF /*!< Capture/compare 6 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_B2IF TIM_SR_B2IF /*!< Second break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +#define LL_TIM_SR_SBIF TIM_SR_SBIF /*!< System Break interrupt flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_BREAK2_ENABLE Break2 Enable + * @{ + */ +#define LL_TIM_BREAK2_DISABLE 0x00000000U /*!< Break2 function disabled */ +#define LL_TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break2 function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +#define LL_TIM_OCMODE_RETRIG_OPM1 TIM_CCMR1_OC1M_3 /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros + * @{ + */ + +/** + * @brief HELPER macro retrieving the UIFCPY flag from the counter value. + * @note ex: @ref __LL_TIM_GETFLAG_UIFCPY (@ref LL_TIM_GetCounter ()); + * @note Relevant only if UIF flag remapping has been enabled (UIF status bit is copied + * to TIMx_CNT register bit 31) + * @param __CNT__ Counter value + * @retval UIF status bit + */ +#define __LL_TIM_GETFLAG_UIFCPY(__CNT__) \ + (READ_BIT((__CNT__), TIM_CNT_UIFCPY) >> TIM_CNT_UIFCPY_Pos) + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)(((__TIMCLK__)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS)); +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note For advanced timer instances RepetitionCounter can be up to 65535. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way. + * @rmtoll CR1 UIFREMAP LL_TIM_EnableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUIFRemap(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @rmtoll CR1 UIFREMAP LL_TIM_DisableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) copy is set. + * @param Counter Counter value + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveUIFCPY(uint32_t Counter) +{ + return (((Counter & TIM_CNT_UIFCPY) == (TIM_CNT_UIFCPY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel\n + * CCER CC5E LL_TIM_CC_EnableChannel\n + * CCER CC6E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel\n + * CCER CC5E LL_TIM_CC_DisableChannel\n + * CCER CC6E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel\n + * CCER CC5E LL_TIM_CC_IsEnabledChannel\n + * CCER CC6E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCMR3 CC5S LL_TIM_OC_ConfigOutput\n + * CCMR3 CC6S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CCER CC5P LL_TIM_OC_ConfigOutput\n + * CCER CC6P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput\n + * CR2 OIS5 LL_TIM_OC_ConfigOutput\n + * CR2 OIS6 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode\n + * CCMR3 OC5M LL_TIM_OC_SetMode\n + * CCMR3 OC6M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode\n + * CCMR3 OC5M LL_TIM_OC_GetMode\n + * CCMR3 OC6M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity\n + * CCER CC5P LL_TIM_OC_SetPolarity\n + * CCER CC6P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity\n + * CCER CC5P LL_TIM_OC_GetPolarity\n + * CCER CC6P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState\n + * CR2 OIS5 LL_TIM_OC_SetIdleState\n + * CR2 OIS6 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState\n + * CR2 OIS5 LL_TIM_OC_GetIdleState\n + * CR2 OIS6 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast\n + * CCMR3 OC5FE LL_TIM_OC_EnableFast\n + * CCMR3 OC6FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast\n + * CCMR3 OC5FE LL_TIM_OC_DisableFast\n + * CCMR3 OC6FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * CCMR3 OC5FE LL_TIM_OC_IsEnabledFast\n + * CCMR3 OC6FE LL_TIM_OC_IsEnabledFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload\n + * CCMR3 OC5PE LL_TIM_OC_EnablePreload\n + * CCMR3 OC6PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload\n + * CCMR3 OC5PE LL_TIM_OC_DisablePreload\n + * CCMR3 OC6PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * CCMR3 OC5PE LL_TIM_OC_IsEnabledPreload\n + * CCMR3 OC6PE LL_TIM_OC_IsEnabledPreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear\n + * CCMR3 OC5CE LL_TIM_OC_EnableClear\n + * CCMR3 OC6CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear\n + * CCMR3 OC5CE LL_TIM_OC_DisableClear\n + * CCMR3 OC6CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * CCMR3 OC5CE LL_TIM_OC_IsEnabledClear\n + * CCMR3 OC6CE LL_TIM_OC_IsEnabledClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Set compare value for output channel 5 (TIMx_CCR5). + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * output channel 5 is supported by a timer instance. + * @rmtoll CCR5 CCR5 LL_TIM_OC_SetCompareCH5 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH5(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + MODIFY_REG(TIMx->CCR5, TIM_CCR5_CCR5, CompareValue); +} + +/** + * @brief Set compare value for output channel 6 (TIMx_CCR6). + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * output channel 6 is supported by a timer instance. + * @rmtoll CCR6 CCR6 LL_TIM_OC_SetCompareCH6 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH6(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR6, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @brief Get compare value (TIMx_CCR5) set for output channel 5. + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * output channel 5 is supported by a timer instance. + * @rmtoll CCR5 CCR5 LL_TIM_OC_GetCompareCH5 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH5(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CCR5, TIM_CCR5_CCR5)); +} + +/** + * @brief Get compare value (TIMx_CCR6) set for output channel 6. + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * output channel 6 is supported by a timer instance. + * @rmtoll CCR6 CCR6 LL_TIM_OC_GetCompareCH6 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH6(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR6)); +} + +/** + * @brief Select on which reference signal the OC5REF is combined to. + * @note Macro IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the combined 3-phase PWM mode. + * @rmtoll CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels\n + * CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels\n + * CCR5 GC5C1 LL_TIM_SetCH5CombinedChannels + * @param TIMx Timer instance + * @param GroupCH5 This parameter can be a combination of the following values: + * @arg @ref LL_TIM_GROUPCH5_NONE + * @arg @ref LL_TIM_GROUPCH5_OC1REFC + * @arg @ref LL_TIM_GROUPCH5_OC2REFC + * @arg @ref LL_TIM_GROUPCH5_OC3REFC + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCH5CombinedChannels(TIM_TypeDef *TIMx, uint32_t GroupCH5) +{ + MODIFY_REG(TIMx->CCR5, (TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1), GroupCH5); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the trigger output 2 (TRGO2) used for ADC synchronization . + * @note Macro IS_TIM_TRGO2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can be used for ADC synchronization. + * @rmtoll CR2 MMS2 LL_TIM_SetTriggerOutput2 + * @param TIMx Timer Instance + * @param ADCSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO2_RESET + * @arg @ref LL_TIM_TRGO2_ENABLE + * @arg @ref LL_TIM_TRGO2_UPDATE + * @arg @ref LL_TIM_TRGO2_CC1F + * @arg @ref LL_TIM_TRGO2_OC1 + * @arg @ref LL_TIM_TRGO2_OC2 + * @arg @ref LL_TIM_TRGO2_OC3 + * @arg @ref LL_TIM_TRGO2_OC4 + * @arg @ref LL_TIM_TRGO2_OC5 + * @arg @ref LL_TIM_TRGO2_OC6 + * @arg @ref LL_TIM_TRGO2_OC4_RISINGFALLING + * @arg @ref LL_TIM_TRGO2_OC6_RISINGFALLING + * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_RISING + * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_FALLING + * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_RISING + * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_FALLING + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput2(TIM_TypeDef *TIMx, uint32_t ADCSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS2, ADCSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @arg @ref LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @arg @ref LL_TIM_TS_ITR7 (*) + * + * (*) Value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @brief Select the external trigger (ETR) input source. + * @note Macro IS_TIM_ETRSEL_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports ETR source selection. + * @rmtoll AF1 ETRSEL LL_TIM_SetETRSource + * @param TIMx Timer instance + * @param ETRSource This parameter can be one of the following values: + * TIM1 + * + * @arg @ref LL_TIM_ETRSOURCE_GPIO + * @arg @ref LL_TIM_ETRSOURCE_COMP1 (**) + * @arg @ref LL_TIM_ETRSOURCE_COMP2 (**) + * @arg @ref LL_TIM_ETRSOURCE_COMP3 (**) + * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD1 + * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD2 + * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD3 + * + * TIM2 (*) + * + * @arg @ref LL_TIM_ETRSOURCE_GPIO + * @arg @ref LL_TIM_ETRSOURCE_COMP1 + * @arg @ref LL_TIM_ETRSOURCE_COMP2 + * @arg @ref LL_TIM_ETRSOURCE_COMP3 (**) + * @arg @ref LL_TIM_ETRSOURCE_LSE + * @arg @ref LL_TIM_ETRSOURCE_MCO (**) + * @arg @ref LL_TIM_ETRSOURCE_MCO2 (**) + * + * TIM3 + * + * @arg @ref LL_TIM_ETRSOURCE_GPIO + * @arg @ref LL_TIM_ETRSOURCE_COMP1 (**) + * @arg @ref LL_TIM_ETRSOURCE_COMP2 (**) + * @arg @ref LL_TIM_ETRSOURCE_COMP3 (**) + * + * TIM4 (*) + * + * @arg @ref LL_TIM_ETRSOURCE_GPIO + * @arg @ref LL_TIM_ETRSOURCE_COMP1 + * @arg @ref LL_TIM_ETRSOURCE_COMP2 + * @arg @ref LL_TIM_ETRSOURCE_COMP3 (**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource) +{ +#if defined(COMP3) + uint32_t etrsel_shift = ((ETRSource == LL_TIM_ETRSOURCE_COMP3) ? 1u : 0u); + if ((TIMx == TIM1) || (TIMx == TIM2)) + { + MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource); + } + else + { + MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource >> etrsel_shift); + } +#else + MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource); +#endif +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @note Bidirectional mode is only supported by advanced timer instances. + * Macro IS_TIM_ADVANCED_INSTANCE(TIMx) can be used to check whether or not + * a timer instance is an advanced-control timer. + * @note In bidirectional mode (BKBID bit set), the Break input is configured both + * in input mode and in open drain output mode. Any active Break event will + * assert a low logic level on the Break input to indicate an internal break + * event to external devices. + * @note When bidirectional mode isn't supported, BreakAFMode must be set to + * LL_TIM_BREAK_AFMODE_INPUT. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK\n + * BDTR BKF LL_TIM_ConfigBRK\n + * BDTR BKBID LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @param BreakFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N8 + * @param BreakAFMode This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_AFMODE_INPUT + * @arg @ref LL_TIM_BREAK_AFMODE_BIDIRECTIONAL + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity, uint32_t BreakFilter, + uint32_t BreakAFMode) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP | TIM_BDTR_BKF | TIM_BDTR_BKBID, BreakPolarity | BreakFilter | BreakAFMode); +} + +/** + * @brief Disarm the break input (when it operates in bidirectional mode). + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @rmtoll BDTR BKDSRM LL_TIM_DisarmBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisarmBRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BKDSRM); +} + +/** + * @brief Re-arm the break input (when it operates in bidirectional mode). + * @note The Break input is automatically armed as soon as MOE bit is set. + * @rmtoll BDTR BKDSRM LL_TIM_ReArmBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ReArmBRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKDSRM); +} + +/** + * @brief Enable the break 2 function. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @rmtoll BDTR BK2E LL_TIM_EnableBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BK2E); +} + +/** + * @brief Disable the break 2 function. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @rmtoll BDTR BK2E LL_TIM_DisableBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BK2E); +} + +/** + * @brief Configure the break 2 input. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @note Bidirectional mode is only supported by advanced timer instances. + * Macro IS_TIM_ADVANCED_INSTANCE(TIMx) can be used to check whether or not + * a timer instance is an advanced-control timer. + * @note In bidirectional mode (BK2BID bit set), the Break 2 input is configured both + * in input mode and in open drain output mode. Any active Break event will + * assert a low logic level on the Break 2 input to indicate an internal break + * event to external devices. + * @note When bidirectional mode isn't supported, Break2AFMode must be set to + * LL_TIM_BREAK2_AFMODE_INPUT. + * @rmtoll BDTR BK2P LL_TIM_ConfigBRK2\n + * BDTR BK2F LL_TIM_ConfigBRK2\n + * BDTR BK2BID LL_TIM_ConfigBRK2 + * @param TIMx Timer instance + * @param Break2Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_POLARITY_LOW + * @arg @ref LL_TIM_BREAK2_POLARITY_HIGH + * @param Break2Filter This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N8 + * @param Break2AFMode This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_AFMODE_INPUT + * @arg @ref LL_TIM_BREAK2_AFMODE_BIDIRECTIONAL + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK2(TIM_TypeDef *TIMx, uint32_t Break2Polarity, uint32_t Break2Filter, + uint32_t Break2AFMode) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BK2P | TIM_BDTR_BK2F | TIM_BDTR_BK2BID, Break2Polarity | Break2Filter | Break2AFMode); +} + +/** + * @brief Disarm the break 2 input (when it operates in bidirectional mode). + * @note The break 2 input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output. + * @rmtoll BDTR BK2DSRM LL_TIM_DisarmBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisarmBRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BK2DSRM); +} + +/** + * @brief Re-arm the break 2 input (when it operates in bidirectional mode). + * @note The Break 2 input is automatically armed as soon as MOE bit is set. + * @rmtoll BDTR BK2DSRM LL_TIM_ReArmBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ReArmBRK2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BK2DSRM); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_EnableBreakInputSource\n + * AF1 BKCMP1E LL_TIM_EnableBreakInputSource\n + * AF1 BKCMP2E LL_TIM_EnableBreakInputSource\n + * AF1 BKCMP3E LL_TIM_EnableBreakInputSource\n + * AF2 BK2INE LL_TIM_EnableBreakInputSource\n + * AF2 BK2CMP1E LL_TIM_EnableBreakInputSource\n + * AF2 BK2CMP2E LL_TIM_EnableBreakInputSource\n + * AF2 BK2CMP3E LL_TIM_EnableBreakInputSource + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP3 (*) + * + * (*) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + SET_BIT(*pReg, Source); +} + +/** + * @brief Disable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_DisableBreakInputSource\n + * AF1 BKCMP1E LL_TIM_DisableBreakInputSource\n + * AF1 BKCMP2E LL_TIM_DisableBreakInputSource\n + * AF1 BKCMP3E LL_TIM_DisableBreakInputSource\n + * AF2 BK2INE LL_TIM_DisableBreakInputSource\n + * AF2 BK2CMP1E LL_TIM_DisableBreakInputSource\n + * AF2 BK2CMP2E LL_TIM_DisableBreakInputSource\n + * AF2 BK2CMP3E LL_TIM_DisableBreakInputSource + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP3 (*) + * + * (*) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + CLEAR_BIT(*pReg, Source); +} + +/** + * @brief Set the polarity of the break signal for the timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINP LL_TIM_SetBreakInputSourcePolarity\n + * AF1 BKCMP1P LL_TIM_SetBreakInputSourcePolarity\n + * AF1 BKCMP2P LL_TIM_SetBreakInputSourcePolarity\n + * AF1 BKCMP3P LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2INP LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2CMP1P LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2CMP2P LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2CMP3P LL_TIM_SetBreakInputSourcePolarity + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP3 (*) + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_POLARITY_LOW + * @arg @ref LL_TIM_BKIN_POLARITY_HIGH + * + * (*) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source, + uint32_t Polarity) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + MODIFY_REG(*pReg, (TIMx_AF1_BKINP << TIM_POSITION_BRK_SOURCE), (Polarity << TIM_POSITION_BRK_SOURCE)); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @arg @ref LL_TIM_DMABURST_BASEADDR_OR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR5 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR6 + * @arg @ref LL_TIM_DMABURST_BASEADDR_AF1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_AF2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_TISEL + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @rmtoll TIM1_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM1_TISEL TI2SEL LL_TIM_SetRemap\n + * TIM2_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM2_TISEL TI2SEL LL_TIM_SetRemap\n + * TIM3_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM3_TISEL TI2SEL LL_TIM_SetRemap\n + * TIM4_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM4_TISEL TI2SEL LL_TIM_SetRemap\n + * TIM4_TISEL TI3SEL LL_TIM_SetRemap\n + * TIM14_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM15_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM15_TISEL TI2SEL LL_TIM_SetRemap\n + * TIM16_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM17_TISEL TI1SEL LL_TIM_SetRemap + * @param TIMx Timer instance + * @param Remap Remap param depends on the TIMx. Description available only + * in CHM version of the User Manual (not in .pdf). + * Otherwise see Reference Manual description of TISEL registers. + * + * Below description summarizes "Timer Instance" and "Remap" param combinations: + * + * TIM1: any combination of TI1_RMP and TI2_RMP where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM1_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM1_TI1_RMP_COMP1 (**) + * + * . . TI2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM1_TI2_RMP_GPIO + * @arg @ref LL_TIM_TIM1_TI2_RMP_COMP2 (**) + * + * . . TI3_RMP can be one of the following values + * @arg @ref LL_TIM_TIM1_TI3_RMP_GPIO + * @arg @ref LL_TIM_TIM1_TI3_RMP_COMP3 (**) + * + * TIM2: any combination of TI1_RMP and TI2_RMP where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM2_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM2_TI1_RMP_COMP1 (**) + * + * . . TI2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM2_TI2_RMP_GPIO + * @arg @ref LL_TIM_TIM2_TI2_RMP_COMP2 (**) + * + * . . TI3_RMP can be one of the following values + * @arg @ref LL_TIM_TIM2_TI3_RMP_GPIO + * @arg @ref LL_TIM_TIM2_TI3_RMP_COMP3 (**) + * + * TIM3: any combination of TI1_RMP and TI2_RMP where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM3_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM3_TI1_RMP_COMP1 (**) + * + * . . TI2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM3_TI2_RMP_GPIO + * @arg @ref LL_TIM_TIM3_TI2_RMP_COMP2 (**) + * + * . . TI3_RMP can be one of the following values + * @arg @ref LL_TIM_TIM3_TI3_RMP_GPIO + * @arg @ref LL_TIM_TIM3_TI3_RMP_COMP3 (**) + * + * TIM4: any combination of TI1_RMP, TI2_RMP and TI3_RMP where (*) + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM4_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM4_TI1_RMP_COMP1 (**) + * + * . . TI2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM4_TI2_RMP_GPIO + * @arg @ref LL_TIM_TIM4_TI2_RMP_COMP2 (**) + * + * . . TI3_RMP can be one of the following values + * @arg @ref LL_TIM_TIM4_TI3_RMP_GPIO + * @arg @ref LL_TIM_TIM4_TI3_RMP_COMP3 (**) + * + * TIM14: one of the following values + * + * @arg @ref LL_TIM_TIM14_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM14_TI1_RMP_RTC_CLK + * @arg @ref LL_TIM_TIM14_TI1_RMP_HSE_32 + * @arg @ref LL_TIM_TIM14_TI1_RMP_MCO + * @arg @ref LL_TIM_TIM14_TI1_RMP_MCO2 (**) + * + * TIM15: any combination of TI1_RMP and TI2_RMP where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM15_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM15_TI1_RMP_TIM2_IC1 + * @arg @ref LL_TIM_TIM15_TI1_RMP_TIM3_IC1 + * + * . . TI2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM15_TI2_RMP_GPIO + * @arg @ref LL_TIM_TIM15_TI2_RMP_TIM2_IC2 + * @arg @ref LL_TIM_TIM15_TI2_RMP_TIM3_IC2 + * + * TIM16: one of the following values + * + * @arg @ref LL_TIM_TIM16_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM16_TI1_RMP_LSI + * @arg @ref LL_TIM_TIM16_TI1_RMP_LSE + * @arg @ref LL_TIM_TIM16_TI1_RMP_RTC_WK + * @arg @ref LL_TIM_TIM16_TI1_RMP_MCO2(**) + * + * TIM17: one of the following values + * + * @arg @ref LL_TIM_TIM17_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM17_TI1_RMP_HSE_32 + * @arg @ref LL_TIM_TIM17_TI1_RMP_MCO + * @arg @ref LL_TIM_TIM17_TI1_RMP_HSI48 (**) + * @arg @ref LL_TIM_TIM17_TI1_RMP_MCO2(**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ + MODIFY_REG(TIMx->TISEL, (TIM_TISEL_TI1SEL | TIM_TISEL_TI2SEL | TIM_TISEL_TI3SEL | TIM_TISEL_TI4SEL), Remap); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management + * @{ + */ +/** + * @brief Set the OCREF clear input source + * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT + * @note This function can only be used in Output compare and PWM modes. + * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource + * @rmtoll OR1 OCREF_CLR LL_TIM_SetOCRefClearInputSource + * @param TIMx Timer instance + * @param OCRefClearInputSource This parameter can be one of the following values: + * @arg @ref LL_TIM_OCREF_CLR_INT_ETR + * @arg @ref LL_TIM_OCREF_CLR_INT_COMP1 (*) + * @arg @ref LL_TIM_OCREF_CLR_INT_COMP2 (*) + * @arg @ref LL_TIM_OCREF_CLR_INT_COMP3 (*) + * + * (*) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, + ((OCRefClearInputSource & OCREF_CLEAR_SELECT_Msk) >> OCREF_CLEAR_SELECT_Pos) << TIM_SMCR_OCCS_Pos); + MODIFY_REG(TIMx->OR1, TIM1_OR1_OCREF_CLR, OCRefClearInputSource); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 5 interrupt flag (CC5F). + * @rmtoll SR CC5IF LL_TIM_ClearFlag_CC5 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC5(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC5IF)); +} + +/** + * @brief Indicate whether Capture/Compare 5 interrupt flag (CC5F) is set (Capture/Compare 5 interrupt is pending). + * @rmtoll SR CC5IF LL_TIM_IsActiveFlag_CC5 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC5(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC5IF) == (TIM_SR_CC5IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 6 interrupt flag (CC6F). + * @rmtoll SR CC6IF LL_TIM_ClearFlag_CC6 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC6(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC6IF)); +} + +/** + * @brief Indicate whether Capture/Compare 6 interrupt flag (CC6F) is set (Capture/Compare 6 interrupt is pending). + * @rmtoll SR CC6IF LL_TIM_IsActiveFlag_CC6 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC6(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC6IF) == (TIM_SR_CC6IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break 2 interrupt flag (B2IF). + * @rmtoll SR B2IF LL_TIM_ClearFlag_BRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_B2IF)); +} + +/** + * @brief Indicate whether break 2 interrupt flag (B2IF) is set (break 2 interrupt is pending). + * @rmtoll SR B2IF LL_TIM_IsActiveFlag_BRK2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_B2IF) == (TIM_SR_B2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the system break interrupt flag (SBIF). + * @rmtoll SR SBIF LL_TIM_ClearFlag_SYSBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_SYSBRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_SBIF)); +} + +/** + * @brief Indicate whether system break interrupt flag (SBIF) is set (system break interrupt is pending). + * @rmtoll SR SBIF LL_TIM_IsActiveFlag_SYSBRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_SYSBRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_SBIF) == (TIM_SR_SBIF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA-Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Disable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Indicates whether the commutation DMA request (COMDE) is enabled. + * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @brief Generate break 2 event. + * @rmtoll EGR B2G LL_TIM_GenerateEvent_BRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_B2G); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM14 || TIM15 || TIM16 || TIM17 || TIM6 || TIM7 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32G0xx_LL_TIM_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_ucpd.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_ucpd.h new file mode 100644 index 0000000..57dbe7a --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_ucpd.h @@ -0,0 +1,1857 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_ucpd.h + * @author MCD Application Team + * @brief Header file of UCPD LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_UCPD_H +#define STM32G0xx_LL_UCPD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (UCPD1) || defined (UCPD2) + +/** @defgroup UCPD_LL UCPD + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup UCPD_LL_ES_INIT UCPD Exported Init structure + * @{ + */ + +/** + * @brief UCPD Init structures definition + */ +typedef struct +{ + uint32_t psc_ucpdclk; /*!< Specify the prescaler for the UCPD clock. + This parameter can be a value of @ref UCPD_LL_EC_PSC. + This feature can be modified afterwards using unitary function @ref LL_UCPD_SetPSCClk(). */ + + uint32_t transwin; /*!< Specify the number of cycles (minus 1) of the half bit clock (see HBITCLKDIV) to achieve a legal + tTransitionWindow (set according to peripheral clock to define an interval of between 12 and 20 us) + This parameter can be a value between Min_Data=0x1 and Max_Data=0x1F + This value can be modified afterwards using unitary function @ref LL_UCPD_SetTransWin(). */ + + uint32_t IfrGap; /*!< Specify the definition of the clock divider (minus 1) in order to generate tInterframeGap + from the peripheral clock. + This parameter can be a value between Min_Data=0x1 and Max_Data=0x1F + This feature can be modified afterwards using unitary function @ref LL_UCPD_SetIfrGap(). */ + + uint32_t HbitClockDiv; /*!< Specify the number of cycles (minus one) at UCPD peripheral for a half bit clock e.g. program 3 + for a bit clock that takes 8 cycles of the peripheral clock "UCPD1_CLK".. + This parameter can be a value between Min_Data=0x0 and Max_Data=0x3F. + This feature can be modified afterwards using unitary function @ref LL_UCPD_SetHbitClockDiv(). */ + +} LL_UCPD_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UCPD_LL_Exported_Constants UCPD Exported Constants + * @{ + */ + +/** @defgroup UCPD_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_ucpd_ReadReg function + * @{ + */ +#define LL_UCPD_SR_TXIS UCPD_SR_TXIS /*!< Transmit interrupt status */ +#define LL_UCPD_SR_TXMSGDISC UCPD_SR_TXMSGDISC /*!< Transmit message discarded interrupt */ +#define LL_UCPD_SR_TXMSGSENT UCPD_SR_TXMSGSENT /*!< Transmit message sent interrupt */ +#define LL_UCPD_SR_TXMSGABT UCPD_SR_TXMSGABT /*!< Transmit message abort interrupt */ +#define LL_UCPD_SR_HRSTDISC UCPD_SR_HRSTDISC /*!< HRST discarded interrupt */ +#define LL_UCPD_SR_HRSTSENT UCPD_SR_HRSTSENT /*!< HRST sent interrupt */ +#define LL_UCPD_SR_TXUND UCPD_SR_TXUND /*!< Tx data underrun condition interrupt */ +#define LL_UCPD_SR_RXNE UCPD_SR_RXNE /*!< Receive data register not empty interrupt */ +#define LL_UCPD_SR_RXORDDET UCPD_SR_RXORDDET /*!< Rx ordered set (4 K-codes) detected interrupt */ +#define LL_UCPD_SR_RXHRSTDET UCPD_SR_RXHRSTDET /*!< Rx Hard Reset detect interrupt */ +#define LL_UCPD_SR_RXOVR UCPD_SR_RXOVR /*!< Rx data overflow interrupt */ +#define LL_UCPD_SR_RXMSGEND UCPD_SR_RXMSGEND /*!< Rx message received */ +#define LL_UCPD_SR_RXERR UCPD_SR_RXERR /*!< Rx error */ +#define LL_UCPD_SR_TYPECEVT1 UCPD_SR_TYPECEVT1 /*!< Type C voltage level event on CC1 */ +#define LL_UCPD_SR_TYPECEVT2 UCPD_SR_TYPECEVT2 /*!< Type C voltage level event on CC2 */ +#define LL_UCPD_SR_TYPEC_VSTATE_CC1 UCPD_SR_TYPEC_VSTATE_CC1 /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in UCPD register + * @param __INSTANCE__ UCPD Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_UCPD_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UCPD_LL_Exported_Functions UCPD Exported Functions + * @{ + */ + +/** @defgroup UCPD_LL_EF_Configuration Configuration + * @{ + */ + +/** @defgroup UCPD_LL_EF_CFG1 CFG1 register + * @{ + */ +/** + * @brief Enable UCPD peripheral + * @rmtoll CFG1 UCPDEN LL_UCPD_Enable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_Enable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG1, UCPD_CFG1_UCPDEN); +} + +/** + * @brief Disable UCPD peripheral + * @note When disabling the UCPD, follow the procedure described in the Reference Manual. + * @rmtoll CFG1 UCPDEN LL_UCPD_Disable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_Disable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG1, UCPD_CFG1_UCPDEN); +} + +/** + * @brief Check if UCPD peripheral is enabled + * @rmtoll CFG1 UCPDEN LL_UCPD_IsEnabled + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnabled(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_UCPDEN) == (UCPD_CFG1_UCPDEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the receiver ordered set detection enable + * @rmtoll CFG1 RXORDSETEN LL_UCPD_SetRxOrderSet + * @param UCPDx UCPD Instance + * @param OrderSet This parameter can be combination of the following values: + * @arg @ref LL_UCPD_ORDERSET_SOP + * @arg @ref LL_UCPD_ORDERSET_SOP1 + * @arg @ref LL_UCPD_ORDERSET_SOP2 + * @arg @ref LL_UCPD_ORDERSET_HARDRST + * @arg @ref LL_UCPD_ORDERSET_CABLERST + * @arg @ref LL_UCPD_ORDERSET_SOP1_DEBUG + * @arg @ref LL_UCPD_ORDERSET_SOP2_DEBUG + * @arg @ref LL_UCPD_ORDERSET_SOP_EXT1 + * @arg @ref LL_UCPD_ORDERSET_SOP_EXT2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxOrderSet(UCPD_TypeDef *UCPDx, uint32_t OrderSet) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_RXORDSETEN, OrderSet); +} + +/** + * @brief Set the prescaler for ucpd clock + * @rmtoll CFG1 UCPDCLK LL_UCPD_SetPSCClk + * @param UCPDx UCPD Instance + * @param Psc This parameter can be one of the following values: + * @arg @ref LL_UCPD_PSC_DIV1 + * @arg @ref LL_UCPD_PSC_DIV2 + * @arg @ref LL_UCPD_PSC_DIV4 + * @arg @ref LL_UCPD_PSC_DIV8 + * @arg @ref LL_UCPD_PSC_DIV16 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetPSCClk(UCPD_TypeDef *UCPDx, uint32_t Psc) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_PSC_UCPDCLK, Psc); +} + +/** + * @brief Set the number of cycles (minus 1) of the half bit clock + * @rmtoll CFG1 TRANSWIN LL_UCPD_SetTransWin + * @param UCPDx UCPD Instance + * @param TransWin a value between Min_Data=0x1 and Max_Data=0x1F + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetTransWin(UCPD_TypeDef *UCPDx, uint32_t TransWin) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_TRANSWIN, TransWin << UCPD_CFG1_TRANSWIN_Pos); +} + +/** + * @brief Set the clock divider value to generate an interframe gap + * @rmtoll CFG1 IFRGAP LL_UCPD_SetIfrGap + * @param UCPDx UCPD Instance + * @param IfrGap a value between Min_Data=0x1 and Max_Data=0x1F + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetIfrGap(UCPD_TypeDef *UCPDx, uint32_t IfrGap) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_IFRGAP, IfrGap << UCPD_CFG1_IFRGAP_Pos); +} + +/** + * @brief Set the clock divider value to generate an interframe gap + * @rmtoll CFG1 HBITCLKDIV LL_UCPD_SetHbitClockDiv + * @param UCPDx UCPD Instance + * @param HbitClock a value between Min_Data=0x0 and Max_Data=0x3F + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetHbitClockDiv(UCPD_TypeDef *UCPDx, uint32_t HbitClock) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_HBITCLKDIV, HbitClock << UCPD_CFG1_HBITCLKDIV_Pos); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_CFG2 CFG2 register + * @{ + */ + +/** + * @brief Enable the wakeup mode + * @rmtoll CFG2 WUPEN LL_UCPD_WakeUpEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_WakeUpEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG2, UCPD_CFG2_WUPEN); +} + +/** + * @brief Disable the wakeup mode + * @rmtoll CFG2 WUPEN LL_UCPD_WakeUpDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_WakeUpDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG2, UCPD_CFG2_WUPEN); +} + +/** + * @brief Force clock enable + * @rmtoll CFG2 FORCECLK LL_UCPD_ForceClockEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ForceClockEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG2, UCPD_CFG2_FORCECLK); +} + +/** + * @brief Force clock disable + * @rmtoll CFG2 FORCECLK LL_UCPD_ForceClockDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ForceClockDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG2, UCPD_CFG2_FORCECLK); +} + +/** + * @brief RxFilter enable + * @rmtoll CFG2 RXFILTDIS LL_UCPD_RxFilterEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxFilterEnable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG2, UCPD_CFG2_RXFILTDIS); +} + +/** + * @brief RxFilter disable + * @rmtoll CFG2 RXFILTDIS LL_UCPD_RxFilterDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxFilterDisable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG2, UCPD_CFG2_RXFILTDIS); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_CR CR register + * @{ + */ +/** + * @brief Type C detector for CC2 enable + * @rmtoll CR CC2TCDIS LL_UCPD_TypeCDetectionCC2Enable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC2Enable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_CC2TCDIS); +} + +/** + * @brief Type C detector for CC2 disable + * @rmtoll CR CC2TCDIS LL_UCPD_TypeCDetectionCC2Disable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC2Disable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_CC2TCDIS); +} + +/** + * @brief Type C detector for CC1 enable + * @rmtoll CR CC1TCDIS LL_UCPD_TypeCDetectionCC1Enable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC1Enable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_CC1TCDIS); +} + +/** + * @brief Type C detector for CC1 disable + * @rmtoll CR CC1TCDIS LL_UCPD_TypeCDetectionCC1Disable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC1Disable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_CC1TCDIS); +} + +/** + * @brief Source Vconn discharge enable + * @rmtoll CR RDCH LL_UCPD_VconnDischargeEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_VconnDischargeEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_RDCH); +} + +/** + * @brief Source Vconn discharge disable + * @rmtoll CR RDCH LL_UCPD_VconnDischargeDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_VconnDischargeDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_RDCH); +} + +/** + * @brief Signal Fast Role Swap request + * @rmtoll CR FRSTX LL_UCPD_VconnDischargeDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SignalFRSTX(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_FRSTX); +} + +/** + * @brief Fast Role swap RX detection enable + * @rmtoll CR FRSRXEN LL_UCPD_FRSDetectionEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_FRSDetectionEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_FRSRXEN); +} + +/** + * @brief Fast Role swap RX detection disable + * @rmtoll CR FRSRXEN LL_UCPD_FRSDetectionDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_FRSDetectionDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_FRSRXEN); +} + +/** + * @brief Set cc enable + * @rmtoll CR CC1VCONNEN LL_UCPD_SetccEnable + * @param UCPDx UCPD Instance + * @param CCEnable This parameter can be one of the following values: + * @arg @ref LL_UCPD_CCENABLE_NONE + * @arg @ref LL_UCPD_CCENABLE_CC1 + * @arg @ref LL_UCPD_CCENABLE_CC2 + * @arg @ref LL_UCPD_CCENABLE_CC1CC2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetccEnable(UCPD_TypeDef *UCPDx, uint32_t CCEnable) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_CCENABLE, CCEnable); +} + +/** + * @brief Set UCPD SNK role + * @rmtoll CR ANAMODE LL_UCPD_SetSNKRole + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetSNKRole(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_ANAMODE); +} + +/** + * @brief Set UCPD SRC role + * @rmtoll CR ANAMODE LL_UCPD_SetSRCRole + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetSRCRole(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_ANAMODE); +} + +/** + * @brief Get UCPD Role + * @rmtoll CR ANAMODE LL_UCPD_GetRole + * @param UCPDx UCPD Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_UCPD_ROLE_SNK + * @arg @ref LL_UCPD_ROLE_SRC + */ +__STATIC_INLINE uint32_t LL_UCPD_GetRole(UCPD_TypeDef const * const UCPDx) +{ + return (uint32_t)(READ_BIT(UCPDx->CR, UCPD_CR_ANAMODE)); +} + +/** + * @brief Set Rp resistor + * @rmtoll CR ANASUBMODE LL_UCPD_SetRpResistor + * @param UCPDx UCPD Instance + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_UCPD_RESISTOR_DEFAULT + * @arg @ref LL_UCPD_RESISTOR_1_5A + * @arg @ref LL_UCPD_RESISTOR_3_0A + * @arg @ref LL_UCPD_RESISTOR_NONE + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRpResistor(UCPD_TypeDef *UCPDx, uint32_t Resistor) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_ANASUBMODE, Resistor); +} + +/** + * @brief Set CC pin + * @rmtoll CR PHYCCSEL LL_UCPD_SetCCPin + * @param UCPDx UCPD Instance + * @param CCPin This parameter can be one of the following values: + * @arg @ref LL_UCPD_CCPIN_CC1 + * @arg @ref LL_UCPD_CCPIN_CC2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetCCPin(UCPD_TypeDef *UCPDx, uint32_t CCPin) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_PHYCCSEL, CCPin); +} + +/** + * @brief Rx enable + * @rmtoll CR PHYRXEN LL_UCPD_RxEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_PHYRXEN); +} + +/** + * @brief Rx disable + * @rmtoll CR PHYRXEN LL_UCPD_RxDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_PHYRXEN); +} + +/** + * @brief Set Rx mode + * @rmtoll CR RXMODE LL_UCPD_SetRxMode + * @param UCPDx UCPD Instance + * @param RxMode This parameter can be one of the following values: + * @arg @ref LL_UCPD_RXMODE_NORMAL + * @arg @ref LL_UCPD_RXMODE_BIST_TEST_DATA + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxMode(UCPD_TypeDef *UCPDx, uint32_t RxMode) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_RXMODE, RxMode); +} + +/** + * @brief Send Hard Reset + * @rmtoll CR TXHRST LL_UCPD_SendHardReset + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SendHardReset(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_TXHRST); +} + +/** + * @brief Send message + * @rmtoll CR TXSEND LL_UCPD_SendMessage + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SendMessage(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_TXSEND); +} + +/** + * @brief Set Tx mode + * @rmtoll CR TXMODE LL_UCPD_SetTxMode + * @param UCPDx UCPD Instance + * @param TxMode This parameter can be one of the following values: + * @arg @ref LL_UCPD_TXMODE_NORMAL + * @arg @ref LL_UCPD_TXMODE_CABLE_RESET + * @arg @ref LL_UCPD_TXMODE_BIST_CARRIER2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetTxMode(UCPD_TypeDef *UCPDx, uint32_t TxMode) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_TXMODE, TxMode); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable FRS interrupt + * @rmtoll IMR FRSEVTIE LL_UCPD_EnableIT_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_FRS(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_FRSEVTIE); +} + +/** + * @brief Enable type c event on CC2 + * @rmtoll IMR TYPECEVT2IE LL_UCPD_EnableIT_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TypeCEventCC2(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT2IE); +} + +/** + * @brief Enable type c event on CC1 + * @rmtoll IMR TYPECEVT1IE LL_UCPD_EnableIT_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TypeCEventCC1(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT1IE); +} + +/** + * @brief Enable Rx message end interrupt + * @rmtoll IMR RXMSGENDIE LL_UCPD_EnableIT_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxMsgEnd(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXMSGENDIE); +} + +/** + * @brief Enable Rx overrun interrupt + * @rmtoll IMR RXOVRIE LL_UCPD_EnableIT_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxOvr(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXOVRIE); +} + +/** + * @brief Enable Rx hard resrt interrupt + * @rmtoll IMR RXHRSTDETIE LL_UCPD_EnableIT_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxHRST(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXHRSTDETIE); +} + +/** + * @brief Enable Rx orderset interrupt + * @rmtoll IMR RXORDDETIE LL_UCPD_EnableIT_RxOrderSet + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxOrderSet(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXORDDETIE); +} + +/** + * @brief Enable Rx non empty interrupt + * @rmtoll IMR RXNEIE LL_UCPD_EnableIT_RxNE + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxNE(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXNEIE); +} + +/** + * @brief Enable TX underrun interrupt + * @rmtoll IMR TXUNDIE LL_UCPD_EnableIT_TxUND + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxUND(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXUNDIE); +} + +/** + * @brief Enable hard reset sent interrupt + * @rmtoll IMR HRSTSENTIE LL_UCPD_EnableIT_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxHRSTSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_HRSTSENTIE); +} + +/** + * @brief Enable hard reset discard interrupt + * @rmtoll IMR HRSTDISCIE LL_UCPD_EnableIT_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxHRSTDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_HRSTDISCIE); +} + +/** + * @brief Enable Tx message abort interrupt + * @rmtoll IMR TXMSGABTIE LL_UCPD_EnableIT_TxMSGABT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxMSGABT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXMSGABTIE); +} + +/** + * @brief Enable Tx message sent interrupt + * @rmtoll IMR TXMSGSENTIE LL_UCPD_EnableIT_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxMSGSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXMSGSENTIE); +} + +/** + * @brief Enable Tx message discarded interrupt + * @rmtoll IMR TXMSGDISCIE LL_UCPD_EnableIT_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxMSGDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXMSGDISCIE); +} + +/** + * @brief Enable Tx data receive interrupt + * @rmtoll IMR TXISIE LL_UCPD_EnableIT_TxIS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxIS(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXISIE); +} + +/** + * @brief Disable FRS interrupt + * @rmtoll IMR FRSEVTIE LL_UCPD_DisableIT_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_FRS(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_FRSEVTIE); +} + +/** + * @brief Disable type c event on CC2 + * @rmtoll IMR TYPECEVT2IE LL_UCPD_DisableIT_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TypeCEventCC2(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT2IE); +} + +/** + * @brief Disable type c event on CC1 + * @rmtoll IMR TYPECEVT1IE LL_UCPD_DisableIT_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TypeCEventCC1(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT1IE); +} + +/** + * @brief Disable Rx message end interrupt + * @rmtoll IMR RXMSGENDIE LL_UCPD_DisableIT_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxMsgEnd(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXMSGENDIE); +} + +/** + * @brief Disable Rx overrun interrupt + * @rmtoll IMR RXOVRIE LL_UCPD_DisableIT_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxOvr(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXOVRIE); +} + +/** + * @brief Disable Rx hard resrt interrupt + * @rmtoll IMR RXHRSTDETIE LL_UCPD_DisableIT_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxHRST(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXHRSTDETIE); +} + +/** + * @brief Disable Rx orderset interrupt + * @rmtoll IMR RXORDDETIE LL_UCPD_DisableIT_RxOrderSet + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxOrderSet(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXORDDETIE); +} + +/** + * @brief Disable Rx non empty interrupt + * @rmtoll IMR RXNEIE LL_UCPD_DisableIT_RxNE + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxNE(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXNEIE); +} + +/** + * @brief Disable TX underrun interrupt + * @rmtoll IMR TXUNDIE LL_UCPD_DisableIT_TxUND + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxUND(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXUNDIE); +} + +/** + * @brief Disable hard reset sent interrupt + * @rmtoll IMR HRSTSENTIE LL_UCPD_DisableIT_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxHRSTSENT(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_HRSTSENTIE); +} + +/** + * @brief Disable hard reset discard interrupt + * @rmtoll IMR HRSTDISCIE LL_UCPD_DisableIT_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxHRSTDISC(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_HRSTDISCIE); +} + +/** + * @brief Disable Tx message abort interrupt + * @rmtoll IMR TXMSGABTIE LL_UCPD_DisableIT_TxMSGABT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxMSGABT(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXMSGABTIE); +} + +/** + * @brief Disable Tx message sent interrupt + * @rmtoll IMR TXMSGSENTIE LL_UCPD_DisableIT_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxMSGSENT(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXMSGSENTIE); +} + +/** + * @brief Disable Tx message discarded interrupt + * @rmtoll IMR TXMSGDISCIE LL_UCPD_DisableIT_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxMSGDISC(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXMSGDISCIE); +} + +/** + * @brief Disable Tx data receive interrupt + * @rmtoll IMR TXISIE LL_UCPD_DisableIT_TxIS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxIS(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXISIE); +} + +/** + * @brief Check if FRS interrupt enabled + * @rmtoll IMR FRSEVTIE LL_UCPD_DisableIT_FRS + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_FRS(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_FRSEVTIE) == UCPD_IMR_FRSEVTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC2 enabled + * @rmtoll IMR TYPECEVT2IE LL_UCPD_DisableIT_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC2(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT2IE) == UCPD_IMR_TYPECEVT2IE) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC1 enabled + * @rmtoll IMR2 TYPECEVT1IE LL_UCPD_IsEnableIT_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC1(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT1IE) == UCPD_IMR_TYPECEVT1IE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx message end interrupt enabled + * @rmtoll IMR RXMSGENDIE LL_UCPD_IsEnableIT_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxMsgEnd(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXMSGENDIE) == UCPD_IMR_RXMSGENDIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx overrun interrupt enabled + * @rmtoll IMR RXOVRIE LL_UCPD_IsEnableIT_RxOvr + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOvr(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXOVRIE) == UCPD_IMR_RXOVRIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx hard resrt interrupt enabled + * @rmtoll IMR RXHRSTDETIE LL_UCPD_IsEnableIT_RxHRST + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxHRST(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXHRSTDETIE) == UCPD_IMR_RXHRSTDETIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx orderset interrupt enabled + * @rmtoll IMR RXORDDETIE LL_UCPD_IsEnableIT_RxOrderSet + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOrderSet(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXORDDETIE) == UCPD_IMR_RXORDDETIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx non empty interrupt enabled + * @rmtoll IMR RXNEIE LL_UCPD_IsEnableIT_RxNE + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxNE(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXNEIE) == UCPD_IMR_RXNEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if TX underrun interrupt enabled + * @rmtoll IMR TXUNDIE LL_UCPD_IsEnableIT_TxUND + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxUND(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXUNDIE) == UCPD_IMR_TXUNDIE) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset sent interrupt enabled + * @rmtoll IMR HRSTSENTIE LL_UCPD_IsEnableIT_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTSENT(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_HRSTSENTIE) == UCPD_IMR_HRSTSENTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset discard interrupt enabled + * @rmtoll IMR HRSTDISCIE LL_UCPD_IsEnableIT_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTDISC(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_HRSTDISCIE) == UCPD_IMR_HRSTDISCIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message abort interrupt enabled + * @rmtoll IMR TXMSGABTIE LL_UCPD_IsEnableIT_TxMSGABT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGABT(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGABTIE) == UCPD_IMR_TXMSGABTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message sent interrupt enabled + * @rmtoll IMR TXMSGSENTIE LL_UCPD_IsEnableIT_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGSENT(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGSENTIE) == UCPD_IMR_TXMSGSENTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message discarded interrupt enabled + * @rmtoll IMR TXMSGDISCIE LL_UCPD_IsEnableIT_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGDISC(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGDISCIE) == UCPD_IMR_TXMSGDISCIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx data receive interrupt enabled + * @rmtoll IMR TXISIE LL_UCPD_IsEnableIT_TxIS + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxIS(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXISIE) == UCPD_IMR_TXISIE) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_IT_Clear Interrupt Clear + * @{ + */ +/** + * @brief Clear FRS interrupt + * @rmtoll ICR FRSEVTIE LL_UCPD_ClearFlag_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_FRS(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_FRSEVTCF); +} + +/** + * @brief Clear type c event on CC2 + * @rmtoll IIMR TYPECEVT2IE LL_UCPD_ClearFlag_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TypeCEventCC2(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TYPECEVT2CF); +} + +/** + * @brief Clear type c event on CC1 + * @rmtoll IIMR TYPECEVT1IE LL_UCPD_ClearFlag_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TypeCEventCC1(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TYPECEVT1CF); +} + +/** + * @brief Clear Rx message end interrupt + * @rmtoll ICR RXMSGENDIE LL_UCPD_ClearFlag_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxMsgEnd(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXMSGENDCF); +} + +/** + * @brief Clear Rx overrun interrupt + * @rmtoll ICR RXOVRIE LL_UCPD_ClearFlag_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxOvr(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXOVRCF); +} + +/** + * @brief Clear Rx hard resrt interrupt + * @rmtoll ICR RXHRSTDETIE LL_UCPD_ClearFlag_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxHRST(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXHRSTDETCF); +} + +/** + * @brief Clear Rx orderset interrupt + * @rmtoll ICR RXORDDETIE LL_UCPD_ClearFlag_RxOrderSet + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxOrderSet(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXORDDETCF); +} + +/** + * @brief Clear TX underrun interrupt + * @rmtoll ICR TXUNDIE LL_UCPD_ClearFlag_TxUND + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxUND(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXUNDCF); +} + +/** + * @brief Clear hard reset sent interrupt + * @rmtoll ICR HRSTSENTIE LL_UCPD_ClearFlag_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxHRSTSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_HRSTSENTCF); +} + +/** + * @brief Clear hard reset discard interrupt + * @rmtoll ICR HRSTDISCIE LL_UCPD_ClearFlag_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxHRSTDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_HRSTDISCCF); +} + +/** + * @brief Clear Tx message abort interrupt + * @rmtoll ICR TXMSGABTIE LL_UCPD_ClearFlag_TxMSGABT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxMSGABT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXMSGABTCF); +} + +/** + * @brief Clear Tx message sent interrupt + * @rmtoll ICR TXMSGSENTIE LL_UCPD_ClearFlag_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxMSGSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXMSGSENTCF); +} + +/** + * @brief Clear Tx message discarded interrupt + * @rmtoll ICR TXMSGDISCIE LL_UCPD_ClearFlag_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxMSGDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXMSGDISCCF); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if FRS interrupt + * @rmtoll SR FRSEVT LL_UCPD_IsActiveFlag_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_FRS(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_FRSEVT) == UCPD_SR_FRSEVT) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC2 + * @rmtoll SR TYPECEVT2 LL_UCPD_IsActiveFlag_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC2(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TYPECEVT2) == UCPD_SR_TYPECEVT2) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC1 + * @rmtoll SR TYPECEVT1 LL_UCPD_IsActiveFlag_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC1(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TYPECEVT1) == UCPD_SR_TYPECEVT1) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx message end interrupt + * @rmtoll SR RXMSGEND LL_UCPD_IsActiveFlag_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxMsgEnd(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXMSGEND) == UCPD_SR_RXMSGEND) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx overrun interrupt + * @rmtoll SR RXOVR LL_UCPD_IsActiveFlag_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOvr(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXOVR) == UCPD_SR_RXOVR) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx hard resrt interrupt + * @rmtoll SR RXHRSTDET LL_UCPD_IsActiveFlag_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxHRST(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXHRSTDET) == UCPD_SR_RXHRSTDET) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx orderset interrupt + * @rmtoll SR RXORDDET LL_UCPD_IsActiveFlag_RxOrderSet + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOrderSet(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXORDDET) == UCPD_SR_RXORDDET) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx non empty interrupt + * @rmtoll SR RXNE LL_UCPD_IsActiveFlag_RxNE + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxNE(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXNE) == UCPD_SR_RXNE) ? 1UL : 0UL); +} + +/** + * @brief Check if TX underrun interrupt + * @rmtoll SR TXUND LL_UCPD_IsActiveFlag_TxUND + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxUND(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXUND) == UCPD_SR_TXUND) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset sent interrupt + * @rmtoll SR HRSTSENT LL_UCPD_IsActiveFlag_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTSENT(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_HRSTSENT) == UCPD_SR_HRSTSENT) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset discard interrupt + * @rmtoll SR HRSTDISC LL_UCPD_IsActiveFlag_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTDISC(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_HRSTDISC) == UCPD_SR_HRSTDISC) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message abort interrupt + * @rmtoll SR TXMSGABT LL_UCPD_IsActiveFlag_TxMSGABT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGABT(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGABT) == UCPD_SR_TXMSGABT) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message sent interrupt + * @rmtoll SR TXMSGSENT LL_UCPD_IsActiveFlag_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGSENT(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGSENT) == UCPD_SR_TXMSGSENT) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message discarded interrupt + * @rmtoll SR TXMSGDISC LL_UCPD_IsActiveFlag_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGDISC(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGDISC) == UCPD_SR_TXMSGDISC) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx data receive interrupt + * @rmtoll SR TXIS LL_UCPD_IsActiveFlag_TxIS + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxIS(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXIS) == UCPD_SR_TXIS) ? 1UL : 0UL); +} + +/** + * @brief return the vstate value for CC2 + * @rmtoll SR TXIS LL_UCPD_GetTypeCVstateCC2 + * @param UCPDx UCPD Instance + * @retval val + */ +__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC2(UCPD_TypeDef const * const UCPDx) +{ + return UCPDx->SR & UCPD_SR_TYPEC_VSTATE_CC2; +} + +/** + * @brief return the vstate value for CC1 + * @rmtoll SR TXIS LL_UCPD_GetTypeCVstateCC1 + * @param UCPDx UCPD Instance + * @retval val + */ +__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC1(UCPD_TypeDef const * const UCPDx) +{ + return UCPDx->SR & UCPD_SR_TYPEC_VSTATE_CC1; +} + +/** + * @} + */ + + +/** @defgroup UCPD_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Rx DMA Enable + * @rmtoll CFG1 RXDMAEN LL_UCPD_RxDMAEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxDMAEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG1, UCPD_CFG1_RXDMAEN); +} + +/** + * @brief Rx DMA Disable + * @rmtoll CFG1 RXDMAEN LL_UCPD_RxDMADisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxDMADisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG1, UCPD_CFG1_RXDMAEN); +} + +/** + * @brief Tx DMA Enable + * @rmtoll CFG1 TXDMAEN LL_UCPD_TxDMAEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TxDMAEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG1, UCPD_CFG1_TXDMAEN); +} + +/** + * @brief Tx DMA Disable + * @rmtoll CFG1 TXDMAEN LL_UCPD_TxDMADisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TxDMADisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG1, UCPD_CFG1_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_UCPD_IsEnabledTxDMA + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnabledTxDMA(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_TXDMAEN) == (UCPD_CFG1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_UCPD_IsEnabledRxDMA + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnabledRxDMA(UCPD_TypeDef const * const UCPDx) +{ + return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_RXDMAEN) == (UCPD_CFG1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief write the orderset for Tx message + * @rmtoll TX_ORDSET TXORDSET LL_UCPD_WriteTxOrderSet + * @param UCPDx UCPD Instance + * @param TxOrderSet one of the following value + * @arg @ref LL_UCPD_ORDERED_SET_SOP + * @arg @ref LL_UCPD_ORDERED_SET_SOP1 + * @arg @ref LL_UCPD_ORDERED_SET_SOP2 + * @arg @ref LL_UCPD_ORDERED_SET_HARD_RESET + * @arg @ref LL_UCPD_ORDERED_SET_CABLE_RESET + * @arg @ref LL_UCPD_ORDERED_SET_SOP1_DEBUG + * @arg @ref LL_UCPD_ORDERED_SET_SOP2_DEBUG + * @retval None + */ +__STATIC_INLINE void LL_UCPD_WriteTxOrderSet(UCPD_TypeDef *UCPDx, uint32_t TxOrderSet) +{ + WRITE_REG(UCPDx->TX_ORDSET, TxOrderSet); +} + +/** + * @brief write the Tx paysize + * @rmtoll TX_PAYSZ TXPAYSZ LL_UCPD_WriteTxPaySize + * @param UCPDx UCPD Instance + * @param TxPaySize + * @retval None. + */ +__STATIC_INLINE void LL_UCPD_WriteTxPaySize(UCPD_TypeDef *UCPDx, uint32_t TxPaySize) +{ + WRITE_REG(UCPDx->TX_PAYSZ, TxPaySize); +} + +/** + * @brief Write data + * @rmtoll TXDR DR LL_UCPD_WriteData + * @param UCPDx UCPD Instance + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None. + */ +__STATIC_INLINE void LL_UCPD_WriteData(UCPD_TypeDef *UCPDx, uint8_t Data) +{ + WRITE_REG(UCPDx->TXDR, Data); +} + +/** + * @brief read RX the orderset + * @rmtoll RX_ORDSET RXORDSET LL_UCPD_ReadRxOrderSet + * @param UCPDx UCPD Instance + * @retval RxOrderSet one of the following value + * @arg @ref LL_UCPD_RXORDSET_SOP + * @arg @ref LL_UCPD_RXORDSET_SOP1 + * @arg @ref LL_UCPD_RXORDSET_SOP2 + * @arg @ref LL_UCPD_RXORDSET_SOP1_DEBUG + * @arg @ref LL_UCPD_RXORDSET_SOP2_DEBUG + * @arg @ref LL_UCPD_RXORDSET_CABLE_RESET + * @arg @ref LL_UCPD_RXORDSET_SOPEXT1 + * @arg @ref LL_UCPD_RXORDSET_SOPEXT2 + */ +__STATIC_INLINE uint32_t LL_UCPD_ReadRxOrderSet(UCPD_TypeDef const * const UCPDx) +{ + return READ_BIT(UCPDx->RX_ORDSET, UCPD_RX_ORDSET_RXORDSET); +} + +/** + * @brief Read the Rx paysize + * @rmtoll TX_PAYSZ TXPAYSZ LL_UCPD_ReadRxPaySize + * @param UCPDx UCPD Instance + * @retval RXPaysize. + */ +__STATIC_INLINE uint32_t LL_UCPD_ReadRxPaySize(UCPD_TypeDef const * const UCPDx) +{ + return READ_BIT(UCPDx->TX_PAYSZ, UCPD_RX_PAYSZ_RXPAYSZ); +} + +/** + * @brief Read data + * @rmtoll TXDR RXDATA LL_UCPD_ReadData + * @param UCPDx UCPD Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_UCPD_ReadData(UCPD_TypeDef const * const UCPDx) +{ + return READ_REG(UCPDx->RXDR); +} + +/** + * @brief Set Rx OrderSet Ext1 + * @rmtoll RX_ORDEXT1 RXSOPX1 LL_UCPD_SetRxOrdExt1 + * @param UCPDx UCPD Instance + * @param SOPExt Value between Min_Data=0x00000 and Max_Data=0xFFFFF + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxOrdExt1(UCPD_TypeDef *UCPDx, uint32_t SOPExt) +{ + WRITE_REG(UCPDx->RX_ORDEXT1, SOPExt); +} + +/** + * @brief Set Rx OrderSet Ext2 + * @rmtoll RX_ORDEXT2 RXSOPX2 LL_UCPD_SetRxOrdExt2 + * @param UCPDx UCPD Instance + * @param SOPExt Value between Min_Data=0x00000 and Max_Data=0xFFFFF + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxOrdExt2(UCPD_TypeDef *UCPDx, uint32_t SOPExt) +{ + WRITE_REG(UCPDx->RX_ORDEXT2, SOPExt); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup UCPD_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_UCPD_DeInit(UCPD_TypeDef *UCPDx); +ErrorStatus LL_UCPD_Init(UCPD_TypeDef *UCPDx, LL_UCPD_InitTypeDef *UCPD_InitStruct); +void LL_UCPD_StructInit(LL_UCPD_InitTypeDef *UCPD_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +#endif /* defined (UCPD1) || defined (UCPD2) */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_UCPD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usart.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usart.h new file mode 100644 index 0000000..839a7df --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usart.h @@ -0,0 +1,4378 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_USART_H +#define STM32G0xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART4) || defined (USART5) || defined (USART6) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Variables USART Private Variables + * @{ + */ +/* Array used to get the USART prescaler division decimal values versus @ref USART_LL_EC_PRESCALER values */ +static const uint32_t USART_PRESCALER_TAB[] = +{ + 1UL, + 2UL, + 4UL, + 6UL, + 8UL, + 10UL, + 12UL, + 16UL, + 32UL, + 64UL, + 128UL, + 256UL +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref USART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error flag */ +#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected flag */ +#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty Clear flag */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */ +#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time flag */ +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection flag */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout flag */ +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block flag */ +#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun Clear flag */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */ +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_USART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_USART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#define LL_USART_ISR_UDR USART_ISR_UDR /*!< SPI Slave underrun error flag */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_USART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_USART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */ +#define LL_USART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_USART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#define LL_USART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_USART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_USART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */ +#define LL_USART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_USART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_USART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_USART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_USART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_USART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_USART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_USART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_USART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_USART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_USART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_USART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_USART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_USART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_USART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_EnableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableFIFO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_DisableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableFIFO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_IsEnabledFIFO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_SetTXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_GetTXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_SetRXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_GetRXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_USART_ConfigFIFOsThreshold + * @param USARTx USART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_SetPrescaler + * @param USARTx USART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_GetPrescaler + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_USART_GetPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling, + uint32_t BaudRate) +{ + uint32_t usartdiv; + uint32_t brrtemp; + + if (PrescalerValue > LL_USART_PRESCALER_DIV256) + { + /* Do not overstep the size of USART_PRESCALER_TAB */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling) +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (USART_PRESCALER_TAB[(uint8_t)PrescalerValue])); + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { + brrresult = (periphclkpresc * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = periphclkpresc / usartdiv; + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_SPI_SLAVE Configuration functions related to SPI Slave feature + * @{ + */ +/** + * @brief Enable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_EnableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlave(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Disable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_DisableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlave(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Indicate if SPI Synchronous Slave mode is enabled + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_IsEnabledSPISlave + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlave(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_SLVEN) == (USART_CR2_SLVEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave Selection depends on NSS input pin + * (The slave is selected when NSS is low and deselected when NSS is high). + * @rmtoll CR2 DIS_NSS LL_USART_EnableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlaveSelect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Disable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave will be always selected and NSS input pin will be ignored. + * @rmtoll CR2 DIS_NSS LL_USART_DisableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlaveSelect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Indicate if SPI Slave Selection depends on NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 DIS_NSS LL_USART_IsEnabledSPISlaveSelect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlaveSelect(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_DIS_NSS) != (USART_CR2_DIS_NSS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsActiveFlag_RXNE LL_USART_IsActiveFlag_RXNE_RXFNE + +/** + * @brief Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXNE_RXFNE LL_USART_IsActiveFlag_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsActiveFlag_TXE LL_USART_IsActiveFlag_TXE_TXFNF + +/** + * @brief Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXE_TXFNF LL_USART_IsActiveFlag_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE_TXFNF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the SPI Slave Underrun error flag is set or not + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ISR UDR LL_USART_IsActiveFlag_UDR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_UDR(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_UDR) == (USART_ISR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFE LL_USART_IsActiveFlag_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFF LL_USART_IsActiveFlag_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not + * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFT LL_USART_IsActiveFlag_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFT LL_USART_IsActiveFlag_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NECF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear TX FIFO Empty Flag + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ICR TXFECF LL_USART_ClearFlag_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TXFE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TXFECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear Smartcard Transmission Complete Before Guard Time Flag + * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} + +/** + * @brief Clear SPI Slave Underrun Flag + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ICR UDRCF LL_USART_ClearFlag_UDR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_UDR(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_UDRCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/* Legacy define */ +#define LL_USART_EnableIT_RXNE LL_USART_EnableIT_RXNE_RXFNE + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_EnableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/* Legacy define */ +#define LL_USART_EnableIT_TXE LL_USART_EnableIT_TXE_TXFNF + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_EnableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_EnableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_USART_EnableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_EnableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_EnableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/* Legacy define */ +#define LL_USART_DisableIT_RXNE LL_USART_DisableIT_RXNE_RXFNE + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_DisableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/* Legacy define */ +#define LL_USART_DisableIT_TXE LL_USART_DisableIT_TXE_TXFNF + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_DisableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_DisableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_DisableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_DisableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_DisableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsEnabledIT_RXNE LL_USART_IsEnabledIT_RXNE_RXFNE + +/** + * @brief Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled. + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_IsEnabledIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsEnabledIT_TXE LL_USART_IsEnabledIT_TXE_TXFNF + +/** + * @brief Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_IsEnabledIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_IsEnabledIT_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_IsEnabledIT_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART TX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_IsEnabledIT_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART RX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_IsEnabledIT_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || USART4 || USART5 || USART6 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_USART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h new file mode 100644 index 0000000..dd4e612 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h @@ -0,0 +1,881 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_USB_H +#define STM32G0xx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined (USB_DRD_FS) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief USB Mode definition + */ + + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1 +} USB_DRD_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_DRD_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR, + HC_ACK +} USB_DRD_HCStateTypeDef; + +/** + * USB HOST Double buffer Isochronous State + */ +typedef enum +{ + USB_PMABUF_EMPTY = 0U, + USB_PMABUF_NOT_EMPTY = 1U +} USB_BuffStateTypedDef; + +/** + * @brief USB Instance Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref USB_Core_Speed */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref USB_Core_PHY */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ + + uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint32_t bulk_doublebuffer_enable; /*!< Enable or disable the double buffer mode on bulk EP */ + + uint32_t iso_singlebuffer_enable; /*!< Enable or disable the Single buffer mode on Isochronous EP */ +} USB_DRD_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type_ */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + + uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ + + uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ +} USB_DRD_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t phy_ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ch_dir; /*!< channel direction + This parameter store the physical channel direction IN/OUT/BIDIR */ + + uint8_t speed; /*!< USB Host speed. + This parameter can be any value of @ref USB_Core_Speed_ */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_EP_Type_ */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_len_db; /*!< Current transfer length used in double buffer mode. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t ErrCnt; /*!< Host channel error count. */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + USB_BuffStateTypedDef pmabuff0_state; /*!< PMA Buffer0 State empty / notEmpty : used in double buffer OUT isochronous */ + + USB_BuffStateTypedDef pmabuff1_state; /*!< PMA Buffer1 State empty / notEmpty : used in double buffer OUT isochronous */ + + USB_DRD_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ + + USB_DRD_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ +} USB_DRD_HCTypeDef; + + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + + +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_FS_SPEED 2U +#define USBH_FSLS_SPEED 1U +/** + * @} + */ + +#define BTABLE_ADDRESS 0x000U + +#define EP_ADDR_MSK 0x7U + +/*!< USB Speed */ +#define USB_DRD_SPEED_FS 1U +#define USB_DRD_SPEED_LS 2U +#define USB_DRD_SPEED_LSFS 3U + +/*!< PID */ +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U + +/*!< Channel Direction */ +#define CH_IN_DIR 1U +#define CH_OUT_DIR 0U + +/*!< Number of used channels in the Application */ +#ifndef USB_DRD_USED_CHANNELS +#define USB_DRD_USED_CHANNELS 8U +#endif /* USB_DRD_USED_CHANNELS */ + +/* First available address in PMA */ +#define PMA_START_ADDR (0x10U + (8U *(USB_DRD_USED_CHANNELS - 2U))) +#define PMA_END_ADDR USB_DRD_PMA_SIZE + + +/** + * used for USB_HC_DoubleBuffer API + */ +#define USB_DRD_DBUFF_ENBALE 1U +#define USB_DRD_DBUFF_DISABLE 2U + + +/* Exported macro ------------------------------------------------------------*/ +/** + * @} + */ +/******************** Bit definition for USB_COUNTn_RX register *************/ +#define USB_CNTRX_NBLK_MSK (0x1FU << 26) +#define USB_CNTRX_BLSIZE (0x1U << 31) + + +/*Set Channel/Endpoint to the USB Register */ +#define USB_DRD_SET_CHEP(USBx, bEpChNum, wRegValue) (*(__IO uint32_t *)(&(USBx)->CHEP0R + (bEpChNum)) = (uint32_t)(wRegValue)) + +/*Get Channel/Endpoint from the USB Register */ +#define USB_DRD_GET_CHEP(USBx, bEpChNum) (*(__IO uint32_t *)(&(USBx)->CHEP0R + (bEpChNum))) + + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpChNum, bDir + * @retval None + */ +#define USB_DRD_FreeUserBuffer(USBx, bEpChNum, bDir) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT double buffered endpoint */ \ + USB_DRD_TX_DTOG((USBx), (bEpChNum)); \ + } \ + else if ((bDir) == 1U) \ + { \ + /* IN double buffered endpoint */ \ + USB_DRD_RX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) + + +/** + * @brief Set the Setup bit in the corresponding channel, when a Setup + transaction is needed. + * @param USBx USB device. + * @param bEpChNum + * @retval None + */ +#define USB_DRD_CHEP_TX_SETUP(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) ; \ + \ + /*Set Setup bit*/ \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_SETUP)); \ + } while(0) + + +/** + * @brief Clears bit ERR_RX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_RX_ERR(USBx, bChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bChNum)); \ + _wRegVal = (_wRegVal & USB_CHEP_REG_MASK & (~USB_CHEP_ERRRX) & (~USB_CHEP_VTRX)) | \ + (USB_CHEP_VTTX | USB_CHEP_ERRTX); \ + \ + USB_DRD_SET_CHEP((USBx), (bChNum), _wRegVal); \ + } while(0) /* USB_DRD_CLEAR_CHEP_RX_ERR */ + + +/** + * @brief Clears bit ERR_TX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_TX_ERR(USBx, bChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bChNum)); \ + _wRegVal = (_wRegVal & USB_CHEP_REG_MASK & (~USB_CHEP_ERRTX) & (~USB_CHEP_VTTX)) | \ + (USB_CHEP_VTRX|USB_CHEP_ERRRX); \ + \ + USB_DRD_SET_CHEP((USBx), (bChNum), _wRegVal); \ + } while(0) /* USB_DRD_CLEAR_CHEP_TX_ERR */ + + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define USB_DRD_SET_CHEP_TX_STATUS(USBx, bEpChNum, wState) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_TX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_CHEP_TX_DTOG1 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_TX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_CHEP_TX_DTOG2 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_TX_DTOG2; \ + } \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX| USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_TX_STATUS */ + + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define USB_DRD_SET_CHEP_RX_STATUS(USBx, bEpChNum, wState) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_RX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_CHEP_RX_DTOG1 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_RX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_CHEP_RX_DTOG2 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_RX_DTOG2; \ + } \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_RX_STATUS */ + + +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval status + */ +#define USB_DRD_GET_CHEP_TX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_TX_STTX) +#define USB_DRD_GET_CHEP_RX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_RX_STRX) + + +/** + * @brief set EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_SET_CHEP_KIND(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_KIND)); \ + } while(0) /* USB_DRD_SET_CHEP_KIND */ + + +/** + * @brief clear EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_KIND(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_EP_KIND_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_CLEAR_CHEP_KIND */ + + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_RX_CHEP_CTR(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & (0xFFFF7FFFU & USB_CHEP_REG_MASK); \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTTX)); \ + } while(0) /* USB_CLEAR_RX_CHEP_CTR */ + +#define USB_DRD_CLEAR_TX_CHEP_CTR(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & (0xFFFFFF7FU & USB_CHEP_REG_MASK); \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX)); \ + } while(0) /* USB_CLEAR_TX_CHEP_CTR */ + + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_RX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wEPVal; \ + \ + _wEPVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wEPVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_DTOG_RX)); \ + } while(0) /* USB_DRD_RX_DTOG */ + +#define USB_DRD_TX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wEPVal; \ + \ + _wEPVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wEPVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_DTOG_TX)); \ + } while(0) /* USB_TX_DTOG */ + + +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_RX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)); \ + \ + if ((_wRegVal & USB_CHEP_DTOG_RX) != 0U) \ + { \ + USB_DRD_RX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) /* USB_DRD_CLEAR_RX_DTOG */ + +#define USB_DRD_CLEAR_TX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)); \ + \ + if ((_wRegVal & USB_CHEP_DTOG_TX) != 0U) \ + { \ + USB_DRD_TX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) /* USB_DRD_CLEAR_TX_DTOG */ + + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define USB_DRD_SET_CHEP_ADDRESS(USBx, bEpChNum, bAddr) \ + do { \ + uint32_t _wRegVal; \ + \ + /*Read the USB->CHEPx into _wRegVal, Reset(DTOGRX/STRX/DTOGTX/STTX) and set the EpAddress*/ \ + _wRegVal = (USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK) | (bAddr); \ + \ + /*Set _wRegVal in USB->CHEPx and set Transmit/Receive Valid Transfer (x=bEpChNum)*/ \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_ADDRESS */ + + +/* PMA API Buffer Descriptor Management ------------------------------------------------------------*/ +/* Buffer Descriptor Table TXBD0/RXBD0 --- > TXBD7/RXBD7 8 possible descriptor +* The buffer descriptor is located inside the packet buffer memory (USB_PMA_BUFF) +* TXBD [Reserve |Countx| Address_Tx] +* RXBD [BLSIEZ|NUM_Block |CounRx| Address_Rx] */ + +/* Set TX Buffer Descriptor Address Field */ +#define USB_DRD_SET_CHEP_TX_ADDRESS(USBx, bEpChNum, wAddr) \ + do { \ + /* Reset old Address */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD &= USB_PMA_TXBD_ADDMSK; \ + \ + /* Bit0 & Bit1 should be =0 PMA must be Word aligned */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD |= (uint32_t)(((uint32_t)(wAddr) >> 2U) << 2U); \ + } while(0) /* USB_DRD_SET_CHEP_TX_ADDRESS */ + +/* Set RX Buffer Descriptor Address Field */ +#define USB_DRD_SET_CHEP_RX_ADDRESS(USBx, bEpChNum, wAddr) \ + do { \ + /* Reset old Address */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD &= USB_PMA_RXBD_ADDMSK; \ + \ + /* Bit0 & Bit1 should be =0 PMA must be Word aligned */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD |= (uint32_t)(((uint32_t)(wAddr) >> 2U) << 2U); \ + } while(0) /* USB_SET_CHEP_RX_ADDRESS */ + + +/** + * @brief Sets counter of rx buffer with no. of blocks. + * @param pdwReg Register pointer + * @param wCount Counter. + * @param wNBlocks no. of Blocks. + * @retval None + */ +#define USB_DRD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ + do { \ + /* Divide PacketSize by 32 to calculate the Nb of Block32 */ \ + (wNBlocks) =((uint32_t)(wCount) >> 5U); \ + if (((uint32_t)(wCount) % 32U) == 0U) \ + { \ + (wNBlocks)--; \ + } \ + \ + (pdwReg)|= (uint32_t)((((wNBlocks) << 26U)) | USB_CNTRX_BLSIZE); \ + } while(0) /* USB_DRD_CALC_BLK32 */ + +#define USB_DRD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ + do { \ + /* Divide PacketSize by 32 to calculate the Nb of Block32 */ \ + (wNBlocks) = (uint32_t)((uint32_t)(wCount) >> 1U); \ + if (((wCount) & 0x1U) != 0U) \ + { \ + (wNBlocks)++; \ + } \ + (pdwReg) |= (uint32_t)((wNBlocks) << 26U); \ + } while(0) /* USB_DRD_CALC_BLK2 */ + +#define USB_DRD_SET_CHEP_CNT_RX_REG(pdwReg, wCount) \ + do { \ + uint32_t wNBlocks; \ + \ + (pdwReg) &= USB_PMA_RXBD_COUNTMSK; \ + if ((wCount) == 0U) \ + { \ + (pdwReg) &= (uint32_t)~USB_CNTRX_NBLK_MSK; \ + (pdwReg) |= USB_CNTRX_BLSIZE; \ + } \ + else if((wCount) <= 62U) \ + { \ + USB_DRD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ + } \ + else \ + { \ + USB_DRD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ + } \ + } while(0) /* USB_DRD_SET_CHEP_CNT_RX_REG */ + + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define USB_DRD_SET_CHEP_TX_CNT(USBx,bEpChNum, wCount) \ + do { \ + /* Reset old TX_Count value */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD &= USB_PMA_TXBD_COUNTMSK; \ + \ + /* Set the wCount in the dedicated EP_TXBuffer */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD |= (uint32_t)((uint32_t)(wCount) << 16U); \ + } while(0) + + +#define USB_DRD_SET_CHEP_RX_DBUF0_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->TXBD), (wCount)) +#define USB_DRD_SET_CHEP_RX_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->RXBD), (wCount)) + + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval Counter value + */ +#define USB_DRD_GET_CHEP_TX_CNT(USBx, bEpChNum) (((USB_DRD_PMA_BUFF + (bEpChNum))->TXBD & 0x03FF0000U) >>16U) +#define USB_DRD_GET_CHEP_RX_CNT(USBx, bEpChNum) (((USB_DRD_PMA_BUFF + (bEpChNum))->RXBD & 0x03FF0000U) >>16U) + +#define USB_DRD_GET_EP_TX_CNT USB_GET_CHEP_TX_CNT +#define USB_DRD_GET_CH_TX_CNT USB_GET_CHEP_TX_CNT + +#define USB_DRD_GET_EP_RX_CNT USB_DRD_GET_CHEP_RX_CNT +#define USB_DRD_GET_CH_RX_CNT USB_DRD_GET_CHEP_RX_CNT +/** + * @brief Sets buffer 0/1 address in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wBuf0Addr buffer 0 address. + * @retval Counter value + */ +#define USB_DRD_SET_CHEP_DBUF0_ADDR(USBx, bEpChNum, wBuf0Addr) USB_DRD_SET_CHEP_TX_ADDRESS((USBx), (bEpChNum), (wBuf0Addr)) +#define USB_DRD_SET_CHEP_DBUF1_ADDR(USBx, bEpChNum, wBuf1Addr) USB_DRD_SET_CHEP_RX_ADDRESS((USBx), (bEpChNum), (wBuf1Addr)) + + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define USB_DRD_SET_CHEP_DBUF_ADDR(USBx, bEpChNum, wBuf0Addr, wBuf1Addr) \ + do { \ + USB_DRD_SET_CHEP_DBUF0_ADDR((USBx), (bEpChNum), (wBuf0Addr)); \ + USB_DRD_SET_CHEP_DBUF1_ADDR((USBx), (bEpChNum), (wBuf1Addr)); \ + } while(0) /* USB_DRD_SET_CHEP_DBUF_ADDR */ + + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define USB_DRD_SET_CHEP_DBUF0_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + USB_DRD_SET_CHEP_RX_DBUF0_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + USB_DRD_SET_CHEP_TX_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + } \ + } while(0) /* USB_DRD_SET_CHEP_DBUF0_CNT */ + +#define USB_DRD_SET_CHEP_DBUF1_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + USB_DRD_SET_CHEP_RX_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD &= USB_PMA_TXBD_COUNTMSK; \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD |= (uint32_t)((uint32_t)(wCount) << 16U); \ + } \ + } \ + } while(0) /* USB_DRD_SET_CHEP_DBUF1_CNT */ + +#define USB_DRD_SET_CHEP_DBUF_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + USB_DRD_SET_CHEP_DBUF0_CNT((USBx), (bEpChNum), (bDir), (wCount)); \ + USB_DRD_SET_CHEP_DBUF1_CNT((USBx), (bEpChNum), (bDir), (wCount)); \ + } while(0) /* USB_DRD_SET_EPCH_DBUF_CNT */ + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_GET_CHEP_DBUF0_CNT(USBx, bEpChNum) (USB_DRD_GET_CHEP_TX_CNT((USBx), (bEpChNum))) +#define USB_DRD_GET_CHEP_DBUF1_CNT(USBx, bEpChNum) (USB_DRD_GET_CHEP_RX_CNT((USBx), (bEpChNum))) +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + + +HAL_StatusTypeDef USB_CoreInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_SetCurrentMode(USB_DRD_TypeDef *USBx, USB_DRD_ModeTypeDef mode); + +#if defined (HAL_PCD_MODULE_ENABLED) +HAL_StatusTypeDef USB_ActivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPSetStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +#endif + +HAL_StatusTypeDef USB_SetDevAddress(USB_DRD_TypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_DRD_TypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_DRD_TypeDef *USBx); + +HAL_StatusTypeDef USB_ResetPort(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_HostInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_HC_IN_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch); +HAL_StatusTypeDef USB_HC_OUT_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch); +HAL_StatusTypeDef USB_HC_StartXfer(USB_DRD_TypeDef *USBx, USB_DRD_HCTypeDef *hc); + +uint32_t USB_GetHostSpeed(USB_DRD_TypeDef *USBx); +uint32_t USB_GetCurrentFrame(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_StopHost(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_HC_DoubleBuffer(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, uint8_t db_state); +HAL_StatusTypeDef USB_HC_Init(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, uint8_t epnum, + uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps); + +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_DRD_TypeDef *USBx); + +void USB_WritePMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +void USB_ReadPMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_LL_USB_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_utils.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_utils.h new file mode 100644 index 0000000..60d4b38 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_utils.h @@ -0,0 +1,345 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_UTILS_H +#define STM32G0xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLR; /*!< Division for the main system clock. + This parameter can be a value of @ref RCC_LL_EC_PLLR_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_UTILS_PACKAGETYPE_QFP100 0x00000000U /*!< LQFP100 package type */ +#define LL_UTILS_PACKAGETYPE_QFN32_GP 0x00000001U /*!< LQFP32/UFQFPN32 General purpose (GP) */ +#define LL_UTILS_PACKAGETYPE_QFN32_N 0x00000002U /*!< LQFP32/UFQFPN32 N-version */ +#define LL_UTILS_PACKAGETYPE_QFN48_GP 0x00000004U /*!< LQFP48/UFQPN48 General purpose (GP) */ +#define LL_UTILS_PACKAGETYPE_QFN48_N 0x00000005U /*!< LQFP48/UFQPN48 N-version */ +#define LL_UTILS_PACKAGETYPE_WLCSP52 0x00000006U /*!< WLCSP52 */ +#define LL_UTILS_PACKAGETYPE_QFN64_GP 0x00000007U /*!< LQFP64 General purpose (GP) */ +#define LL_UTILS_PACKAGETYPE_QFN64_N 0x00000008U /*!< LQFP64 N-version */ +#define LL_UTILS_PACKAGETYPE_BGA64_N 0x0000000AU /*!< UFBGA64 N-version */ +#define LL_UTILS_PACKAGETYPE_QFP80 0x0000000BU /*!< LQFP80 package type */ +#define LL_UTILS_PACKAGETYPE_BGA100 0x0000000CU /*!< UBGA100 package type */ +#elif defined(STM32G061xx) || defined(STM32G051xx) || defined(STM32G050xx) || defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G030xx) +#define LL_UTILS_PACKAGETYPE_SO8 0x00000001U /*!< SO8 package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP18 0x00000002U /*!< WLCSP18 package type */ +#define LL_UTILS_PACKAGETYPE_TSSOP20 0x00000003U /*!< TSSOP20 package type */ +#define LL_UTILS_PACKAGETYPE_QFP28 0x00000004U /*!< UFQFPN28 package type */ +#define LL_UTILS_PACKAGETYPE_QFN32 0x00000005U /*!< UFQFPN32 / LQFP32 package type */ +#define LL_UTILS_PACKAGETYPE_QFN48 0x00000007U /*!< UFQFPN48 / LQFP48 package type */ +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define LL_UTILS_PACKAGETYPE_QFN28_GP 0x00000000U /*!< UFQFPN28 general purpose (GP) package type */ +#define LL_UTILS_PACKAGETYPE_QFN28_PD 0x00000001U /*!< UFQFPN28 Power Delivery (PD) */ +#define LL_UTILS_PACKAGETYPE_QFN32_GP 0x00000004U /*!< UFQFPN32 / LQFP32 general purpose (GP) package type */ +#define LL_UTILS_PACKAGETYPE_QFN32_PD 0x00000005U /*!< UFQFPN32 / LQFP32 Power Delivery (PD) package type */ +#define LL_UTILS_PACKAGETYPE_QFN48 0x00000008U /*!< UFQFPN48 / LQFP488 package type */ +#define LL_UTILS_PACKAGETYPE_QFP64 0x0000000CU /*!< LQPF64 package type */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40]) + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0x0000FFFFUL); +} + +/** + * @brief Get Package type + * @retval PKG[3:0]: Package type - This parameter can be a value of @ref UTILS_EC_PACKAGETYPE + * @if defined(STM32G0C1xx) + * @arg @ref LL_UTILS_PACKAGETYPE_QFP100 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_N + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48_N + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP52 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN64_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN64_N + * @arg @ref LL_UTILS_PACKAGETYPE_BGA64_N + * @arg @ref LL_UTILS_PACKAGETYPE_QFP80 + * @arg @ref LL_UTILS_PACKAGETYPE_BGA100 + * @elif defined(STM32G061xx) || defined(STM32G041xx) + * @arg @ref LL_UTILS_PACKAGETYPE_SO8 + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP18 + * @arg @ref LL_UTILS_PACKAGETYPE_TSSOP20 + * @arg @ref LL_UTILS_PACKAGETYPE_QFP28 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 + * @elif defined(STM32G081xx) + * @arg @ref LL_UTILS_PACKAGETYPE_QFN28_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN28_PD + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_PD + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 + * @arg @ref LL_UTILS_PACKAGETYPE_QFP64 + * @endif + * + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU); +#else + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0xFU); +#endif +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Number of ticks + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_SetFlashLatency(uint32_t HCLKFrequency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_UTILS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_wwdg.h b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_wwdg.h new file mode 100644 index 0000000..b8dc39f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_wwdg.h @@ -0,0 +1,331 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_wwdg.h + * @author MCD Application Team + * @brief Header file of WWDG LL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_WWDG_H +#define STM32G0xx_LL_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (WWDG) + +/** @defgroup WWDG_LL WWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Constants WWDG Exported Constants + * @{ + */ + +/** @defgroup WWDG_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_WWDG_ReadReg and LL_WWDG_WriteReg functions + * @{ + */ +#define LL_WWDG_CFR_EWI WWDG_CFR_EWI +/** + * @} + */ + +/** @defgroup WWDG_LL_EC_PRESCALER PRESCALER + * @{ + */ +#define LL_WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define LL_WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define LL_WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define LL_WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_0 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/8 */ +#define LL_WWDG_PRESCALER_16 WWDG_CFR_WDGTB_2 /*!< WWDG counter clock = (PCLK1/4096)/16 */ +#define LL_WWDG_PRESCALER_32 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/32 */ +#define LL_WWDG_PRESCALER_64 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/64 */ +#define LL_WWDG_PRESCALER_128 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/128 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Macros WWDG Exported Macros + * @{ + */ +/** @defgroup WWDG_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_WWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_WWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable Window Watchdog. The watchdog is always disabled after a reset. + * @note It is enabled by setting the WDGA bit in the WWDG_CR register, + * then it cannot be disabled again except by a reset. + * This bit is set by software and only cleared by hardware after a reset. + * When WDGA = 1, the watchdog can generate a reset. + * @rmtoll CR WDGA LL_WWDG_Enable + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_Enable(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CR, WWDG_CR_WDGA); +} + +/** + * @brief Checks if Window Watchdog is enabled + * @rmtoll CR WDGA LL_WWDG_IsEnabled + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabled(WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->CR, WWDG_CR_WDGA) == (WWDG_CR_WDGA)) ? 1UL : 0UL); +} + +/** + * @brief Set the Watchdog counter value to provided value (7-bits T[6:0]) + * @note When writing to the WWDG_CR register, always write 1 in the MSB b6 to avoid generating an immediate reset + * This counter is decremented every (4096 x 2expWDGTB) PCLK cycles + * A reset is produced when it rolls over from 0x40 to 0x3F (bit T6 becomes cleared) + * Setting the counter lower then 0x40 causes an immediate reset (if WWDG enabled) + * @rmtoll CR T LL_WWDG_SetCounter + * @param WWDGx WWDG Instance + * @param Counter 0..0x7F (7 bit counter value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetCounter(WWDG_TypeDef *WWDGx, uint32_t Counter) +{ + MODIFY_REG(WWDGx->CR, WWDG_CR_T, Counter); +} + +/** + * @brief Return current Watchdog Counter Value (7 bits counter value) + * @rmtoll CR T LL_WWDG_GetCounter + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Counter value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetCounter(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CR, WWDG_CR_T)); +} + +/** + * @brief Set the time base of the prescaler (WDGTB). + * @note Prescaler is used to apply ratio on PCLK clock, so that Watchdog counter + * is decremented every (4096 x 2expWDGTB) PCLK cycles + * @rmtoll CFR WDGTB LL_WWDG_SetPrescaler + * @param WWDGx WWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + * @arg @ref LL_WWDG_PRESCALER_16 + * @arg @ref LL_WWDG_PRESCALER_32 + * @arg @ref LL_WWDG_PRESCALER_64 + * @arg @ref LL_WWDG_PRESCALER_128 + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_WDGTB, Prescaler); +} + +/** + * @brief Return current Watchdog Prescaler Value + * @rmtoll CFR WDGTB LL_WWDG_GetPrescaler + * @param WWDGx WWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + * @arg @ref LL_WWDG_PRESCALER_16 + * @arg @ref LL_WWDG_PRESCALER_32 + * @arg @ref LL_WWDG_PRESCALER_64 + * @arg @ref LL_WWDG_PRESCALER_128 + */ +__STATIC_INLINE uint32_t LL_WWDG_GetPrescaler(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CFR, WWDG_CFR_WDGTB)); +} + +/** + * @brief Set the Watchdog Window value to be compared to the downcounter (7-bits W[6:0]). + * @note This window value defines when write in the WWDG_CR register + * to program Watchdog counter is allowed. + * Watchdog counter value update must occur only when the counter value + * is lower than the Watchdog window register value. + * Otherwise, a MCU reset is generated if the 7-bit Watchdog counter value + * (in the control register) is refreshed before the downcounter has reached + * the watchdog window register value. + * Physically is possible to set the Window lower then 0x40 but it is not recommended. + * To generate an immediate reset, it is possible to set the Counter lower than 0x40. + * @rmtoll CFR W LL_WWDG_SetWindow + * @param WWDGx WWDG Instance + * @param Window 0x00..0x7F (7 bit Window value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetWindow(WWDG_TypeDef *WWDGx, uint32_t Window) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_W, Window); +} + +/** + * @brief Return current Watchdog Window Value (7 bits value) + * @rmtoll CFR W LL_WWDG_GetWindow + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Window value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetWindow(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CFR, WWDG_CFR_W)); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ +/** + * @brief Indicates if the WWDG Early Wakeup Interrupt Flag is set or not. + * @note This bit is set by hardware when the counter has reached the value 0x40. + * It must be cleared by software by writing 0. + * A write of 1 has no effect. This bit is also set if the interrupt is not enabled. + * @rmtoll SR EWIF LL_WWDG_IsActiveFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsActiveFlag_EWKUP(WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->SR, WWDG_SR_EWIF) == (WWDG_SR_EWIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear WWDG Early Wakeup Interrupt Flag (EWIF) + * @rmtoll SR EWIF LL_WWDG_ClearFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_ClearFlag_EWKUP(WWDG_TypeDef *WWDGx) +{ + WRITE_REG(WWDGx->SR, ~WWDG_SR_EWIF); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable the Early Wakeup Interrupt. + * @note When set, an interrupt occurs whenever the counter reaches value 0x40. + * This interrupt is only cleared by hardware after a reset + * @rmtoll CFR EWI LL_WWDG_EnableIT_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_EnableIT_EWKUP(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CFR, WWDG_CFR_EWI); +} + +/** + * @brief Check if Early Wakeup Interrupt is enabled + * @rmtoll CFR EWI LL_WWDG_IsEnabledIT_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->CFR, WWDG_CFR_EWI) == (WWDG_CFR_EWI)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* WWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_WWDG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c new file mode 100644 index 0000000..af4c01d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c @@ -0,0 +1,759 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief STM32G0xx HAL Driver version number + */ +#define __STM32G0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32G0xx_HAL_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */ +#define __STM32G0xx_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32G0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32G0xx_HAL_VERSION ((__STM32G0xx_HAL_VERSION_MAIN << 24U)\ + |(__STM32G0xx_HAL_VERSION_SUB1 << 16U)\ + |(__STM32G0xx_HAL_VERSION_SUB2 << 8U )\ + |(__STM32G0xx_HAL_VERSION_RC)) + +#if defined(VREFBUF) +#define VREFBUF_TIMEOUT_VALUE 10U /*!< 10 ms */ +#endif /* VREFBUF */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Exported variables ---------------------------------------------------------*/ +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @brief HAL Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### HAL Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief Configure the Flash prefetch and the Instruction cache, + * the time base source, NVIC and any required global low level hardware + * by calling the HAL_MspInit() callback function to be optionally defined in user file + * stm32g0xx_hal_msp.c. + * + * @note HAL_Init() function is called at the beginning of program after reset and before + * the clock configuration. + * + * @note In the default implementation the System Timer (Systick) is used as source of time base. + * The Systick configuration is based on HSI clock, as HSI is the clock + * used after a system Reset. + * Once done, time base tick starts incrementing: the tick variable counter is incremented + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Configure Flash prefetch, Instruction cache */ + /* Default configuration at reset is: */ + /* - Prefetch disabled */ + /* - Instruction cache enabled */ + +#if (INSTRUCTION_CACHE_ENABLE == 0U) + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); +#endif /* INSTRUCTION_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0U) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); + + __HAL_RCC_IOP_FORCE_RESET(); + __HAL_RCC_IOP_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U /(uint32_t)uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32G0xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return ((DBG->IDCODE & DBG_IDCODE_REV_ID) >> 16U); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return ((DBG->IDCODE) & DBG_IDCODE_DEV_ID); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return (READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @brief SYSCFG configuration functions + * +@verbatim + =============================================================================== + ##### HAL SYSCFG configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Pin remap + (+) Configure the Voltage reference buffer + (+) Enable/Disable the Voltage reference buffer + (+) Enable/Disable the I/O analog switch voltage booster + (+) Enable/Disable dead battery behavior(*) + (+) Configure Clamping Diode on specific pins(*) + (*) Feature not available on all devices + +@endverbatim + * @{ + */ +#if defined(VREFBUF) +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg @ref SYSCFG_VREFBUF_VoltageScale + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg @ref SYSCFG_VREFBUF_HighImpedance + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @note VrefBuf voltage scale is calibrated in production for each device, + * using voltage scale 1. This calibration value is loaded + * as default trimming value at device power up. + * This trimming value can be fine tuned for voltage scales 0 and 1 + * using this function. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while (READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0x00U) + { + if ((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} +#endif /* VREFBUF */ + +/** + * @brief Enable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Enable the remap on PA11_PA12 + * @param PinRemap specifies which pins have to be remapped + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + SET_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Disable the remap on PA11_PA12 + * @param PinRemap specifies which pins will behave normally + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + CLEAR_BIT(SYSCFG->CFGR1, PinRemap); +} + +#if defined(SYSCFG_CDEN_SUPPORT) +/** + * @brief Enable Clamping Diode on specified IO + * @param PinConfig specifies on which pins clamping Diode has to be enabled + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_ClampingDiode + * @retval None + */ +void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig)); + SET_BIT(SYSCFG->CFGR2, PinConfig); +} + +/** + * @brief Disable Clamping Diode on specified IO + * @param PinConfig specifies on which pins clamping Diode has to be disabled + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_ClampingDiode + * @retval None + */ +void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig)); + CLEAR_BIT(SYSCFG->CFGR2, PinConfig); +} +#endif /* SYSCFG_CDEN_SUPPORT */ + +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +/** + * @brief Strobe configuration of GPIO depending on UCPDx dead battery settings + * @param ConfigDeadBattery specifies on which pins to make effective or not Dead Battery sw configuration + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_UCPD1_STROBE + * @arg @ref SYSCFG_UCPD2_STROBE + * @retval None + */ +void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery) +{ + assert_param(IS_SYSCFG_DBATT_CONFIG(ConfigDeadBattery)); + + /* Change strobe configuration of GPIO depending on UCPDx dead battery settings */ + MODIFY_REG(SYSCFG->CFGR1, (SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE), ConfigDeadBattery); +} +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c new file mode 100644 index 0000000..eac23b0 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c @@ -0,0 +1,3006 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Initialization and de-initialization functions + * ++ Initialization and Configuration of ADC + * + Operation functions + * ++ Start, stop, get result of conversions of regular + * group, using 3 possible modes: polling, interruption or DMA. + * + Control functions + * ++ Channels configuration on regular group + * ++ Analog Watchdog configuration + * + State functions + * ++ ADC state machine management + * ++ Interrupts and flags management + * Other functions (extended functions) are available in file + * "stm32g0xx_hal_adc_ex.c". + * + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution. + + (+) Interrupt generation at the end of regular conversion and in case of + analog watchdog or overrun events. + + (+) Single and continuous conversion modes. + + (+) Scan mode for conversion of several channels sequentially. + + (+) Data alignment with in-built data coherency. + + (+) Programmable sampling time (common to group of channels) + + (+) External trigger (timer or EXTI) with configurable polarity + + (+) DMA request generation for transfer of conversions data of regular group. + + (+) ADC calibration + + (+) ADC conversion of regular group. + + (+) ADC supply requirements: 1.62 V to 3.6 V. + + (+) ADC input range: from Vref- (connected to Vssa) to Vref+ (connected to + Vdda or to an external voltage reference). + + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + Caution: On STM32G0, ADC clock frequency max is 35MHz (refer + to device datasheet). + Therefore, ADC clock source from RCC and ADC clock + prescaler must be configured to remain below + this maximum frequency. + + (++) Two clock settings are mandatory: + (+++) ADC clock (core clock, also possibly conversion clock). + + (+++) ADC clock (conversions clock). + Four possible clock sources: synchronous clock from APB clock (same as ADC core clock) + or asynchronous clock from RCC level: SYSCLK, HSI16, PLLPCLK. + + (+++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) __HAL_RCC_ADC_CLK_ENABLE(); (mandatory: core clock) + + (++) ADC clock source and clock prescaler are configured at ADC level with + parameter "ClockPrescaler" using function HAL_ADC_Init(). + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADCx_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, group regular, channels parameters *** + ================================================================ + [..] + + (#) Configure the ADC parameters (resolution, data alignment, ...) + and regular group parameters (conversion trigger, sequencer, ...) + using function HAL_ADC_Init(). + + (#) Configure the channels for regular group parameters (channel number, + channel rank into sequencer, ..., into regular group) + using function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AnalogWDGConfig(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) Optionally, perform an automatic ADC calibration to improve the + conversion accuracy + using function HAL_ADCEx_Calibration_Start(). + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) HAL_ADC_LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __ADCx_FORCE_RESET(), __ADCx_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location) or with + other device clock parameters configuration: + (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI14; + (+++) RCC_OscInitStructure.HSI14State = RCC_HSI14_OFF; (if not used for system clock) + (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_Init(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_ADC_RegisterCallback() + to register an interrupt callback. + [..] + + Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + [..] + + By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit() + or @ref HAL_ADC_Init() function. + [..] + + When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Fixed timeout values for ADC calibration, enable settling time, disable */ +/* settling time. */ +/* Values defined to be higher than worst cases: low clock frequency, */ +/* maximum prescaler. */ +/* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */ +/* prescaler 4, sampling time 7.5 ADC clock cycles, resolution 12 bits. */ +/* Unit: ms */ +#define ADC_ENABLE_TIMEOUT (2UL) +#define ADC_DISABLE_TIMEOUT (2UL) +#define ADC_STOP_CONVERSION_TIMEOUT (2UL) +#define ADC_CHANNEL_CONF_RDY_TIMEOUT (1UL) + +/* Register CHSELR bits corresponding to ranks 2 to 8 . */ +#define ADC_CHSELR_SQ2_TO_SQ8 (ADC_CHSELR_SQ2 | ADC_CHSELR_SQ3 | ADC_CHSELR_SQ4 | \ + ADC_CHSELR_SQ5 | ADC_CHSELR_SQ6 | ADC_CHSELR_SQ7 | ADC_CHSELR_SQ8) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief ADC Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the ADC peripheral and regular group according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (refer to description of RCC configuration for ADC + * in header of this file). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @note This function configures the ADC within 2 scopes: scope of entire + * ADC and scope of regular group. For parameters details, see comments + * of structure "ADC_InitTypeDef". + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmpCFGR1 = 0UL; + uint32_t tmpCFGR2 = 0UL; + uint32_t tmp_adc_reg_is_conversion_on_going; + __IO uint32_t wait_loop_index = 0UL; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler)); + assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution)); + assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); + assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); + assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoPowerOff)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon1)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon2)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode)); + + assert_param(IS_ADC_TRIGGER_FREQ(hadc->Init.TriggerFrequencyMode)); + + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + + if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + } + } + + /* ADC group regular discontinuous mode can be enabled only if */ + /* continuous mode is disabled. */ + assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (hadc->Init.ContinuousConvMode == ENABLE))); + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + /* Init the ADC Callback settings */ + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ + hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; /* Legacy weak callback */ + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; /* Legacy weak callback */ + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; /* Legacy weak callback */ + + if (hadc->MspInitCallback == NULL) + { + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hadc->MspInitCallback(hadc); +#else + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Initialize Lock */ + hadc->Lock = HAL_UNLOCKED; + } + + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Enable ADC internal voltage regulator */ + LL_ADC_EnableInternalRegulator(hadc->Instance); + + /* Delay for ADC stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* Verification that ADC voltage regulator is correctly enabled, whether */ + /* or not ADC is coming from state reset (if any potential problem of */ + /* clocking, voltage regulator would not be enabled). */ + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed and if there is no conversion on going on regular */ + /* group (ADC may already be enabled at this point if HAL_ADC_Init() is */ + /* called to update a parameter on the fly). */ + tmp_adc_reg_is_conversion_on_going = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + && (tmp_adc_reg_is_conversion_on_going == 0UL) + ) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Configuration of common ADC parameters */ + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Internal voltage regulator (no parameter in HAL ADC init structure) */ + /* - Clock configuration */ + /* - ADC resolution */ + /* - Oversampling */ + /* - Trigger frequency mode */ + /* Note: If low power mode AutoPowerOff is enabled, ADC enable */ + /* and disable phases are performed automatically by hardware */ + /* (in this case, flag ADC_FLAG_RDY is not set). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Some parameters of this register are not reset, since they are set */ + /* by other functions and must be kept in case of usage of this */ + /* function on the fly (update of a parameter of ADC_InitTypeDef */ + /* without needing to reconfigure all other ADC groups/channels */ + /* parameters): */ + /* - internal measurement paths: Vbat, temperature sensor, Vref */ + /* (set into HAL_ADC_ConfigChannel() ) */ + + /* Configuration of ADC resolution */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_RES, + hadc->Init.Resolution); + + tmpCFGR2 |= ((hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) | + hadc->Init.Oversampling.Ratio | + hadc->Init.Oversampling.RightBitShift | + hadc->Init.Oversampling.TriggeredMode | + hadc->Init.TriggerFrequencyMode + ); + + if (hadc->Init.OversamplingMode == ENABLE) + { + SET_BIT(tmpCFGR2, ADC_CFGR2_OVSE); + } + + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_CKMODE | + ADC_CFGR2_LFTRIG | + ADC_CFGR2_OVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS | + ADC_CFGR2_TOVS, + tmpCFGR2); + + /* Configuration of ADC clock mode: asynchronous clock source */ + /* with selectable prescaler. */ + if (((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV1) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV2) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV4)) + { + MODIFY_REG(ADC1_COMMON->CCR, + ADC_CCR_PRESC, + hadc->Init.ClockPrescaler & ADC_CCR_PRESC); + } + } + + /* Configuration of ADC: */ + /* - discontinuous mode */ + /* - LowPowerAutoWait mode */ + /* - LowPowerAutoPowerOff mode */ + /* - continuous conversion mode */ + /* - overrun */ + /* - external trigger to start conversion */ + /* - external trigger polarity */ + /* - data alignment */ + /* - resolution */ + /* - scan direction */ + /* - DMA continuous request */ + tmpCFGR1 |= (ADC_CFGR1_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | + ADC_CFGR1_AUTOOFF((uint32_t)hadc->Init.LowPowerAutoPowerOff) | + ADC_CFGR1_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | + ADC_CFGR1_OVERRUN(hadc->Init.Overrun) | + hadc->Init.DataAlign | + ADC_SCAN_SEQ_MODE(hadc->Init.ScanConvMode) | + ADC_CFGR1_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests)); + + /* Update setting of discontinuous mode only if continuous mode is disabled */ + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + if (hadc->Init.ContinuousConvMode == DISABLE) + { + /* Enable the selected ADC group regular discontinuous mode */ + tmpCFGR1 |= ADC_CFGR1_DISCEN; + } + else + { + /* ADC regular group discontinuous was intended to be enabled, */ + /* but ADC regular group modes continuous and sequencer discontinuous */ + /* cannot be enabled simultaneously. */ + + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + tmpCFGR1 |= ((hadc->Init.ExternalTrigConv & ADC_CFGR1_EXTSEL) | + hadc->Init.ExternalTrigConvEdge); + } + + /* Update ADC configuration register with previous settings */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | + ADC_CFGR1_WAIT | + ADC_CFGR1_CONT | + ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTSEL | + ADC_CFGR1_EXTEN | + ADC_CFGR1_ALIGN | + ADC_CFGR1_SCANDIR | + ADC_CFGR1_DMACFG, + tmpCFGR1); + + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_LFTRIG | + ADC_CFGR2_OVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS | + ADC_CFGR2_TOVS, + tmpCFGR2); + + /* Channel sampling time configuration */ + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_1, hadc->Init.SamplingTimeCommon1); + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_2, hadc->Init.SamplingTimeCommon2); + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is not present by hardware on this device, but */ + /* emulated by software for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion". */ + /* Channels must be configured into each rank using function */ + /* "HAL_ADC_ConfigChannel()". */ + if (hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) + { + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + /* Count number of ranks available in HAL ADC handle variable */ + uint32_t ADCGroupRegularSequencerRanksCount; + + /* Parse all ranks from 1 to 8 */ + for (ADCGroupRegularSequencerRanksCount = 0UL; ADCGroupRegularSequencerRanksCount < (8UL); ADCGroupRegularSequencerRanksCount++) + { + /* Check each sequencer rank until value of end of sequence */ + if (((hadc->ADCGroupRegularSequencerRanks >> (ADCGroupRegularSequencerRanksCount * 4UL)) & ADC_CHSELR_SQ1) == + ADC_CHSELR_SQ1) + { + break; + } + } + + if (ADCGroupRegularSequencerRanksCount == 1UL) + { + /* Set ADC group regular sequencer: */ + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else + { + /* Set ADC group regular sequencer: */ + /* - Set ADC group regular sequencer to value memorized */ + /* in HAL ADC handle */ + /* Note: This value maybe be initialized at a unknown value, */ + /* therefore after the first call of "HAL_ADC_Init()", */ + /* each rank corresponding to parameter "NbrOfConversion" */ + /* must be set using "HAL_ADC_ConfigChannel()". */ + /* - Set sequencer scan length by clearing ranks above maximum rank */ + /* and do not modify other ranks value. */ + MODIFY_REG(hadc->Instance->CHSELR, + ADC_CHSELR_SQ_ALL, + (ADC_CHSELR_SQ2_TO_SQ8 << (((hadc->Init.NbrOfConversion - 1UL) * ADC_REGULAR_RANK_2) & 0x1FUL)) | (hadc->ADCGroupRegularSequencerRanks) + ); + } + } + + /* Check back that ADC registers have effectively been configured to */ + /* ensure of no potential problem of ADC core peripheral clocking. */ + /* Check through register CFGR1 (excluding analog watchdog configuration: */ + /* set into separate dedicated function, and bits of ADC resolution set */ + /* out of temporary variable 'tmpCFGR1'). */ + if ((hadc->Instance->CFGR1 & ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_RES)) + == tmpCFGR1) + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to their default reset + * values, with deinitialization of the ADC MSP. + * @note For devices with several ADCs: reset of ADC common registers is done + * only if all ADCs sharing the same common group are disabled. + * (function "HAL_ADC_MspDeInit()" is also called under the same conditions: + * all ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * If this is not the case, reset of these common parameters reset is + * bypassed without error reporting: it can be the intended behavior in + * case of reset of a single ADC while the other ADCs sharing the same + * common group is still running. + * @note By default, HAL_ADC_DeInit() set ADC in mode deep power-down: + * this saves more power by reducing leakage currents + * and is particularly interesting before entering MCU low-power modes. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going, on regular group */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Change ADC state */ + hadc->State = HAL_ADC_STATE_READY; + } + + /* Disable ADC internal voltage regulator */ + LL_ADC_DisableInternalRegulator(hadc->Instance); + } + + /* Note: HAL ADC deInit is done independently of ADC conversion stop */ + /* and disable return status. In case of status fail, attempt to */ + /* perform deinitialization anyway and it is up user code in */ + /* in HAL_ADC_MspDeInit() to reset the ADC peripheral using */ + /* system RCC hard reset. */ + + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD3 | ADC_IT_AWD2 | + ADC_IT_AWD1 | ADC_IT_OVR | + ADC_IT_EOS | ADC_IT_EOC | + ADC_IT_EOSMP | ADC_IT_RDY)); + + /* Reset register ISR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | + ADC_FLAG_AWD1 | ADC_FLAG_OVR | + ADC_FLAG_EOS | ADC_FLAG_EOC | + ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + + /* Reset register CFGR1 */ + hadc->Instance->CFGR1 &= ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES | + ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + hadc->Instance->CFGR2 &= ~ADC_CFGR2_CKMODE; + + /* Reset register SMPR */ + hadc->Instance->SMPR &= ~ADC_SMPR_SMP1; + + /* Reset register TR1 */ + hadc->Instance->TR1 &= ~(ADC_TR1_HT1 | ADC_TR1_LT1); + + /* Reset register CHSELR */ + hadc->Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CCR */ + ADC1_COMMON->CCR &= ~(ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN | ADC_CCR_PRESC); + + /* ========== Hard reset ADC peripheral ========== */ + /* Performs a global reset of the entire ADC peripheral: ADC state is */ + /* forced to a similar state after device power-on. */ + /* If needed, copy-paste and uncomment the following reset code into */ + /* function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */ + /* */ + /* __HAL_RCC_ADC1_FORCE_RESET() */ + /* __HAL_RCC_ADC1_RELEASE_RESET() */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + if (hadc->MspDeInitCallback == NULL) + { + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hadc->MspDeInitCallback(hadc); +#else + /* DeInit the low level hardware */ + HAL_ADC_MspDeInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Reset HAL ADC handle variable */ + hadc->ADCGroupRegularSequencerRanks = 0x00000000UL; + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Initialize the ADC MSP. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitialize the ADC MSP. + * @param hadc ADC handle + * @note All ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ADC Callback + * To be used instead of the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = pCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = pCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = pCallback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = pCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a ADC Callback + * ADC callback is redirected to the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hadc->State & HAL_ADC_STATE_READY) != 0) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = HAL_ADC_ErrorCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions + * @brief ADC IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular group. + (+) Stop conversion of regular group. + (+) Poll for conversion complete on regular group. + (+) Poll for conversion event. + (+) Get result of regular channel conversion. + (+) Start conversion of regular group and enable interruptions. + (+) Stop conversion of regular group and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion of regular group and enable DMA transfer. + (+) Stop conversion of regular group and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enable ADC, start conversion of regular group. + * @note Interruptions enabled in this function: None. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for regular group conversion to be completed. + * @note ADC conversion flags EOS (end of sequence) and EOC (end of + * conversion) are cleared by this function, with an exception: + * if low power feature "LowPowerAutoWait" is enabled, flags are + * not cleared to not interfere with this feature until data register + * is read using function HAL_ADC_GetValue(). + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode and polling for end of each conversion (ADC init + * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV). + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. Nevertheless, polling can still + * be performed on the complete sequence (ADC init + * parameter "EOCSelection" set to ADC_EOC_SEQ_CONV). + * @param hadc ADC handle + * @param Timeout Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t tmp_Flag_End; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* If end of conversion selected to end of sequence conversions */ + if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV) + { + tmp_Flag_End = ADC_FLAG_EOS; + } + /* If end of conversion selected to end of unitary conversion */ + else /* ADC_EOC_SINGLE_CONV */ + { + /* Verification that ADC configuration is compliant with polling for */ + /* each conversion: */ + /* Particular case is ADC configured in DMA mode and ADC sequencer with */ + /* several ranks and polling for end of each conversion. */ + /* For code simplicity sake, this particular case is generalized to */ + /* ADC configured in DMA mode and and polling for end of each conversion. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + return HAL_ERROR; + } + else + { + tmp_Flag_End = (ADC_FLAG_EOC); + } + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait until End of unitary conversion or sequence conversions flag is raised */ + while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* Check whether end of sequence is reached */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Clear end of conversion flag of regular group if low power feature */ + /* "LowPowerAutoWait " is disabled, to not interfere with this feature */ + /* until data register is read using function HAL_ADC_GetValue(). */ + if (hadc->Init.LowPowerAutoWait == DISABLE) + { + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Poll for ADC event. + * @param hadc ADC handle + * @param EventType the ADC event type. + * This parameter can be one of the following values: + * @arg @ref ADC_EOSMP_EVENT ADC End of Sampling event + * @arg @ref ADC_AWD1_EVENT ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 devices) + * @arg @ref ADC_AWD2_EVENT ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 families) + * @arg @ref ADC_AWD3_EVENT ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 families) + * @arg @ref ADC_OVR_EVENT ADC Overrun event + * @param Timeout Timeout value in millisecond. + * @note The relevant flag is cleared if found to be set, except for ADC_FLAG_OVR. + * Indeed, the latter is reset only if hadc->Init.Overrun field is set + * to ADC_OVR_DATA_OVERWRITTEN. Otherwise, data register may be potentially overwritten + * by a new converted data as soon as OVR is cleared. + * To reset OVR flag once the preserved data is retrieved, the user can resort + * to macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + switch (EventType) + { + /* End Of Sampling event */ + case ADC_EOSMP_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + + /* Clear the End Of Sampling flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + + break; + + /* Analog watchdog (level out of window) event */ + /* Note: In case of several analog watchdog enabled, if needed to know */ + /* which one triggered and on which ADCx, test ADC state of analog watchdog */ + /* flags HAL_ADC_STATE_AWD1/2/3 using function "HAL_ADC_GetState()". */ + /* For example: */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD2) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD3) != 0UL) " */ + + /* Check analog watchdog 1 flag */ + case ADC_AWD_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + + break; + + /* Check analog watchdog 2 flag */ + case ADC_AWD2_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + + break; + + /* Check analog watchdog 3 flag */ + case ADC_AWD3_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + + break; + + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* If overrun is set to overwrite previous data, overrun event is not */ + /* considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + } + else + { + /* Clear ADC Overrun flag only if Overrun is set to ADC_OVR_DATA_OVERWRITTEN + otherwise, data register is potentially overwritten by new converted data as soon + as OVR is cleared. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable ADC, start conversion of regular group with interruption. + * @note Interruptions enabled in this function according to initialization + * setting : EOC (end of conversion), EOS (end of sequence), + * OVR overrun. + * Each of these interruptions has its dedicated callback function. + * @note To guarantee a proper reset of all interruptions once all the needed + * conversions are obtained, HAL_ADC_Stop_IT() must be called to ensure + * a correct stop of the IT-based conversions. + * @note By default, HAL_ADC_Start_IT() does not enable the End Of Sampling + * interruption. If required (e.g. in case of oversampling with trigger + * mode), the user must: + * 1. first clear the EOSMP flag if set with macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP) + * 2. then enable the EOSMP interrupt with macro __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOSMP) + * before calling HAL_ADC_Start_IT(). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Disable all interruptions before enabling the desired ones */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* Enable ADC end of conversion interrupt */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC); + break; + } + + /* Enable ADC overrun interrupt */ + /* If hadc->Init.Overrun is set to ADC_OVR_DATA_PRESERVED, only then is + ADC_IT_OVR enabled; otherwise data overwrite is considered as normal + behavior and no CPU time is lost for a non-processed interruption */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + } + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for regular group */ + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enable ADC, start conversion of regular group and transfer result through DMA. + * @note Interruptions enabled in this function: + * overrun (if applicable), DMA half transfer, DMA transfer complete. + * Each of these interruptions has its dedicated callback function. + * @param hadc ADC handle + * @param pData Destination Buffer address. + * @param Length Number of data to be transferred from ADC peripheral to memory + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Specific case for first call occurrence of this function (DMA transfer */ + /* not activated and ADC disabled), DMA transfer must be activated */ + /* with ADC disabled. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) == 0UL) + { + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + /* Disable ADC */ + LL_ADC_Disable(hadc->Instance); + } + + /* Enable ADC DMA mode */ + hadc->Instance->CFGR1 |= ADC_CFGR1_DMAEN; + } + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC */ + /* operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable ADC overrun interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + + /* Start the DMA channel */ + tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential ADC group regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + { + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripheral */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, */ + /* to keep in memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Disable(hadc); + } + else + { + (void)ADC_Disable(hadc); + } + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + + /* Disable ADC DMA (ADC DMA configuration of continuous requests is kept) */ + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC regular group conversion result. + * @note Reading register DR automatically clears ADC flag EOC + * (ADC group regular end of unitary conversion). + * @note This function does not clear ADC flag EOS + * (ADC group regular end of sequence conversion). + * Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_EOS). + * @param hadc ADC handle + * @retval ADC group regular conversion data + */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* Return ADC converted value */ + return hadc->Instance->DR; +} + +/** + * @brief Handle ADC interrupt request. + * @param hadc ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) +{ + uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ + uint32_t tmp_isr = hadc->Instance->ISR; + uint32_t tmp_ier = hadc->Instance->IER; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + + /* ========== Check End of Sampling flag for ADC group regular ========== */ + if (((tmp_isr & ADC_FLAG_EOSMP) == ADC_FLAG_EOSMP) && ((tmp_ier & ADC_IT_EOSMP) == ADC_IT_EOSMP)) + { + /* Update state machine on end of sampling status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + } + + /* End Of Sampling callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->EndOfSamplingCallback(hadc); +#else + HAL_ADCEx_EndOfSamplingCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + } + + /* ====== Check ADC group regular end of unitary conversion sequence conversions ===== */ + if ((((tmp_isr & ADC_FLAG_EOC) == ADC_FLAG_EOC) && ((tmp_ier & ADC_IT_EOC) == ADC_IT_EOC)) || + (((tmp_isr & ADC_FLAG_EOS) == ADC_FLAG_EOS) && ((tmp_ier & ADC_IT_EOS) == ADC_IT_EOS))) + { + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + } + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ + /* Note: Into callback function "HAL_ADC_ConvCpltCallback()", */ + /* to determine if conversion has been triggered from EOC or EOS, */ + /* possibility to use: */ + /* " if ( __HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_EOS)) " */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + /* Note: in case of overrun set to ADC_OVR_DATA_PRESERVED, end of */ + /* conversion flags clear induces the release of the preserved data.*/ + /* Therefore, if the preserved data value is needed, it must be */ + /* read preliminarily into HAL_ADC_ConvCpltCallback(). */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* ========== Check Analog watchdog 1 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD1) == ADC_FLAG_AWD1) && ((tmp_ier & ADC_IT_AWD1) == ADC_IT_AWD1)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window 1 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindowCallback(hadc); +#else + HAL_ADC_LevelOutOfWindowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + } + + /* ========== Check analog watchdog 2 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD2) == ADC_FLAG_AWD2) && ((tmp_ier & ADC_IT_AWD2) == ADC_IT_AWD2)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Level out of window 2 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow2Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow2Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + } + + /* ========== Check analog watchdog 3 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD3) == ADC_FLAG_AWD3) && ((tmp_ier & ADC_IT_AWD3) == ADC_IT_AWD3)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Level out of window 3 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow3Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow3Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + } + + /* ========== Check Overrun flag ========== */ + if (((tmp_isr & ADC_FLAG_OVR) == ADC_FLAG_OVR) && ((tmp_ier & ADC_IT_OVR) == ADC_IT_OVR)) + { + /* If overrun is set to overwrite previous data (default setting), */ + /* overrun event is not considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + /* Exception for usage with DMA overrun event always considered as an */ + /* error. */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + overrun_error = 1UL; + } + else + { + /* Check DMA configuration */ + if (LL_ADC_REG_GetDMATransfer(hadc->Instance) != LL_ADC_REG_DMA_TRANSFER_NONE) + { + overrun_error = 1UL; + } + } + + if (overrun_error == 1UL) + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Error callback */ + /* Note: In case of overrun, ADC conversion data is preserved until */ + /* flag OVR is reset. */ + /* Therefore, old ADC conversion data can be retrieved in */ + /* function "HAL_ADC_ErrorCallback()". */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + + /* ========== Check channel configuration ready flag ========== */ + if (((tmp_isr & ADC_FLAG_CCRDY) == ADC_FLAG_CCRDY) && ((tmp_ier & ADC_IT_CCRDY) == ADC_IT_CCRDY)) + { + /* Level out of window 1 callback */ + HAL_ADCEx_ChannelConfigReadyCallback(hadc); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_CCRDY); + } +} + +/** + * @brief Conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Conversion DMA half-transfer callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 1 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC error callback in non-blocking mode + * (ADC conversion with interruption or transfer by DMA). + * @note In case of error due to overrun when using ADC with DMA transfer + * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"): + * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". + * - If needed, restart a new ADC conversion using function + * "HAL_ADC_Start_DMA()" + * (this function is also clearing overrun flag) + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on regular group + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configure a channel to be assigned to ADC group regular. + * @note In case of usage of internal measurement channels: + * Vbat/VrefInt/TempSensor. + * These internal paths can be disabled using function + * HAL_ADC_DeInit(). + * @note Possibility to update parameters on the fly: + * This function initializes channel into ADC group regular, + * following calls to this function can be used to reconfigure + * some parameters of structure "ADC_ChannelConfTypeDef" on the fly, + * without resetting the ADC. + * The setting of these parameters is conditioned to ADC state: + * Refer to comments of structure "ADC_ChannelConfTypeDef". + * @param hadc ADC handle + * @param sConfig Structure of ADC channel assigned to ADC group regular. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_config_internal_channel; + __IO uint32_t wait_loop_index = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(sConfig->Channel)); + assert_param(IS_ADC_SAMPLING_TIME_COMMON(sConfig->SamplingTime)); + + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + assert_param(IS_ADC_REGULAR_RANK_SEQ_FIXED(sConfig->Rank)); + } + else + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + + assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Channel number */ + /* - Channel sampling time */ + /* - Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Configure channel: depending on rank setting, add it or remove it from */ + /* ADC sequencer. */ + /* If sequencer set to not fully configurable with channel rank set to */ + /* none, remove the channel from the sequencer. */ + /* Otherwise (sequencer set to fully configurable or to to not fully */ + /* configurable with channel rank to be set), configure the selected */ + /* channel. */ + if (sConfig->Rank != ADC_RANK_NONE) + { + /* Regular sequence configuration */ + /* Note: ADC channel configuration requires few ADC clock cycles */ + /* to be ready. Processing of ADC settings in this function */ + /* induce that a specific wait time is not necessary. */ + /* For more details on ADC channel configuration ready, */ + /* refer to function "LL_ADC_IsActiveFlag_CCRDY()". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Set the channel by enabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChAdd(hadc->Instance, sConfig->Channel); + } + else + { + /* Sequencer set to fully configurable: */ + /* Set the channel by entering it into the selected rank. */ + + /* Memorize the channel set into variable in HAL ADC handle */ + MODIFY_REG(hadc->ADCGroupRegularSequencerRanks, + ADC_CHSELR_SQ1 << (sConfig->Rank & 0x1FUL), + __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel) << (sConfig->Rank & 0x1FUL)); + + /* If the selected rank is below ADC group regular sequencer length, */ + /* apply the configuration in ADC register. */ + /* Note: Otherwise, configuration is not applied. */ + /* To apply it, parameter'NbrOfConversion' must be increased. */ + if (((sConfig->Rank >> 2UL) + 1UL) <= hadc->Init.NbrOfConversion) + { + LL_ADC_REG_SetSequencerRanks(hadc->Instance, sConfig->Rank, sConfig->Channel); + } + } + + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime); + + /* Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + /* internal measurement paths enable: If internal channel selected, */ + /* enable dedicated internal buffers and path. */ + /* Note: these internal measurement paths can be disabled using */ + /* HAL_ADC_DeInit() or removing the channel from sequencer with */ + /* channel configuration parameter "Rank". */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + /* If the requested internal measurement path has already been enabled, */ + /* bypass the configuration processing. */ + if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel); + + /* Delay for temperature sensor stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + else if ((sConfig->Channel == ADC_CHANNEL_VBAT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel); + } + else if ((sConfig->Channel == ADC_CHANNEL_VREFINT) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + else + { + /* Regular sequencer configuration */ + /* Note: Case of sequencer set to fully configurable: */ + /* Sequencer rank cannot be disabled, only affected to */ + /* another channel. */ + /* To remove a rank, use parameter 'NbrOfConversion". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Reset the channel by disabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChRem(hadc->Instance, sConfig->Channel); + } + + /* Management of internal measurement channels: Vbat/VrefInt/TempSensor. */ + /* If internal channel selected, enable dedicated internal buffers and */ + /* paths. */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_TEMPSENSOR & tmp_config_internal_channel); + } + else if (sConfig->Channel == ADC_CHANNEL_VBAT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_VBAT & tmp_config_internal_channel); + } + else if (sConfig->Channel == ADC_CHANNEL_VREFINT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_VREFINT & tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + } + + /* If a conversion is on going on regular group, no update on regular */ + /* channel could be done on neither of the channel configuration structure */ + /* parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Configure the analog watchdog. + * @note Possibility to update parameters on the fly: + * This function initializes the selected analog watchdog, successive + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_AnalogWDGConfTypeDef" on the fly, without resetting + * the ADC. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_AnalogWDGConfTypeDef". + * @note On this STM32 series, analog watchdog thresholds can be modified + * while ADC conversion is on going. + * In this case, some constraints must be taken into account: + * the programmed threshold values are effective from the next + * ADC EOC (end of unitary conversion). + * Considering that registers write delay may happen due to + * bus activity, this might cause an uncertainty on the + * effective timing of the new programmed threshold values. + * @param hadc ADC handle + * @param AnalogWDGConfig Structure of ADC analog watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmpAWDHighThresholdShifted; + uint32_t tmpAWDLowThresholdShifted; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(AnalogWDGConfig->WatchdogNumber)); + assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode)); + assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); + + if (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) + { + assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel)); + } + + /* Verify thresholds range */ + if (hadc->Init.OversamplingMode == ENABLE) + { + /* Case of oversampling enabled: depending on ratio and shift configuration, + analog watchdog thresholds can be higher than ADC resolution. + Verify if thresholds are within maximum thresholds range. */ + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->LowThreshold)); + } + else + { + /* Verify if thresholds are within the selected ADC resolution */ + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on ADC group regular: */ + /* - Analog watchdog channels */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Analog watchdog configuration */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Configuration of analog watchdog: */ + /* - Set the analog watchdog enable mode: one or overall group of */ + /* channels. */ + switch (AnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, + __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR)); + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_DISABLE); + break; + } + + /* Update state, clear previous result related to AWD1 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD1(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD1(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD1(hadc->Instance); + } + } + /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */ + else + { + switch (AnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + /* Update AWD by bitfield to keep the possibility to monitor */ + /* several channels by successive calls of this function. */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + SET_BIT(hadc->Instance->AWD2CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel))); + } + else + { + SET_BIT(hadc->Instance->AWD3CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel))); + } + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE); + break; + } + + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + /* Update state, clear previous result related to AWD2 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD2(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD2(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD2(hadc->Instance); + } + } + /* (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */ + else + { + /* Update state, clear previous result related to AWD3 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD3(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD3(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD3(hadc->Instance); + } + } + } + + } + + /* Analog watchdog thresholds configuration */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmpAWDHighThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->HighThreshold); + tmpAWDLowThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->LowThreshold); + } + /* Case of ADC_ANALOGWATCHDOG_2 and ADC_ANALOGWATCHDOG_3 */ + else + { + /* No need to shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmpAWDHighThresholdShifted = AnalogWDGConfig->HighThreshold; + tmpAWDLowThresholdShifted = AnalogWDGConfig->LowThreshold; + } + + /* Set ADC analog watchdog thresholds value of both thresholds high and low */ + LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, AnalogWDGConfig->WatchdogNumber, tmpAWDHighThresholdShifted, + tmpAWDLowThresholdShifted); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions + * @brief ADC Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral state and errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the ADC handle state. + * @note ADC state machine is managed by bitfields, ADC status must be + * compared with states bits. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + * @param hadc ADC handle + * @retval ADC handle state (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return ADC handle state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code. + * @param hadc ADC handle + * @retval ADC error code (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Stop ADC conversion. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped to disable the ADC. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Verification if ADC is not already stopped on regular group to bypass */ + /* this function if not needed. */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) != 0UL) + { + /* Stop potential conversion on going on regular group */ + /* Software is allowed to set ADSTP only when ADSTART=1 and ADDIS=0 */ + if (LL_ADC_IsDisableOngoing(hadc->Instance) == 0UL) + { + /* Stop ADC group regular conversion */ + LL_ADC_REG_StopConversion(hadc->Instance); + } + + /* Wait for conversion effectively stopped */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADSTART) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + __IO uint32_t wait_loop_index = 0UL; + + /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ + /* enabling phase not yet completed: flag ADC ready not yet set). */ + /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */ + /* causes: ADC clock not running, ...). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Check if conditions to enable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN)) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Enable the ADC peripheral */ + LL_ADC_Enable(hadc->Instance); + + if ((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) & LL_ADC_PATH_INTERNAL_TEMPSENSOR) != 0UL) + { + /* Delay for temperature sensor buffer stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* If low power mode AutoPowerOff is enabled, power-on/off phases are */ + /* performed automatically by hardware and flag ADC ready is not set. */ + if (hadc->Init.LowPowerAutoPowerOff != ENABLE) + { + /* Wait for ADC effectively enabled */ + tickstart = HAL_GetTick(); + + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + { + /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit + has been cleared (after a calibration), ADEN bit is reset by the + calibration logic. + The workaround is to continue setting ADEN until ADRDY is becomes 1. + Additionally, ADC_ENABLE_TIMEOUT is defined to encompass this + 4 ADC clock cycle duration */ + /* Note: Test of ADC enabled required due to hardware constraint to */ + /* not enable ADC if already enabled. */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_Enable(hadc->Instance); + } + + if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Disable the selected ADC. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + const uint32_t tmp_adc_is_disable_on_going = LL_ADC_IsDisableOngoing(hadc->Instance); + + /* Verification if ADC is not already disabled: */ + /* Note: forbidden to disable ADC (set bit ADC_CR_ADDIS) if ADC is already */ + /* disabled. */ + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_disable_on_going == 0UL) + ) + { + /* Check if conditions to disable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) + { + /* Disable the ADC peripheral */ + LL_ADC_Disable(hadc->Instance); + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Wait for ADC effectively disabled */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else /* DMA and-or internal error occurred */ + { + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL) + { + /* Call HAL ADC Error Callback function */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else + { + /* Call ADC DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Half conversion callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvHalfCpltCallback(hadc); +#else + HAL_ADC_ConvHalfCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c new file mode 100644 index 0000000..542c22c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c @@ -0,0 +1,356 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc_ex.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Operation functions + * ++ Calibration + * +++ ADC automatic self-calibration + * +++ Calibration factors get or set + * Other functions (generic functions) are available in file + * "stm32g0xx_hal_adc.c". + * + @verbatim + [..] + (@) Sections "ADC peripheral features" and "How to use this driver" are + available in file of generic functions "stm32g0xx_hal_adc.c". + [..] + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADCEx ADCEx + * @brief ADC Extended HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Constants ADC Extended Private Constants + * @{ + */ + +/* Fixed timeout value for ADC calibration. */ +/* Values defined to be higher than worst cases: maximum ratio between ADC */ +/* and CPU clock frequencies. */ +/* Example of profile low frequency : ADC frequency at 31.25kHz (ADC clock */ +/* source PLL 8MHz, ADC clock prescaler 256), CPU frequency 52MHz. */ +/* Calibration time max = 116 / fADC (refer to datasheet) */ +/* = 193 024 CPU cycles */ +#define ADC_CALIBRATION_TIMEOUT (193024UL) /*!< ADC calibration time-out value (unit: CPU cycles) */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Functions ADC Extended Exported Functions + * @{ + */ + +/** @defgroup ADCEx_Exported_Functions_Group1 Extended Input and Output operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Perform the ADC self-calibration. + (+) Get calibration factors. + (+) Set calibration factors. + +@endverbatim + * @{ + */ + +/** + * @brief Perform an ADC automatic self-calibration + * Calibration prerequisite: ADC must be disabled (execute this + * function before HAL_ADC_Start() or after HAL_ADC_Stop() ). + * @note Calibration factor can be read after calibration, using function + * HAL_ADC_GetValue() (value on 7 bits: from DR[6;0]). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + __IO uint32_t wait_loop_index = 0UL; + uint32_t backup_setting_adc_dma_transfer; /* Note: Variable not declared as volatile because register read is already declared as volatile */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Calibration prerequisite: ADC must be disabled. */ + + /* Disable the ADC (if not already disabled) */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Disable ADC DMA transfer request during calibration */ + /* Note: Specificity of this STM32 series: Calibration factor is */ + /* available in data register and also transferred by DMA. */ + /* To not insert ADC calibration factor among ADC conversion data */ + /* in array variable, DMA transfer must be disabled during */ + /* calibration. */ + backup_setting_adc_dma_transfer = READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG); + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG); + + /* Start ADC calibration */ + SET_BIT(hadc->Instance->CR, ADC_CR_ADCAL); + + /* Wait for calibration completion */ + while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) + { + wait_loop_index++; + if (wait_loop_index >= ADC_CALIBRATION_TIMEOUT) + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + + /* Restore ADC DMA transfer request after calibration */ + SET_BIT(hadc->Instance->CFGR1, backup_setting_adc_dma_transfer); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Note: No need to update variable "tmp_hal_status" here: already set */ + /* to state "HAL_ERROR" by function disabling the ADC. */ + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get the calibration factor. + * @param hadc ADC handle. + * @retval Calibration value. + */ +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return the selected ADC calibration value */ + return ((hadc->Instance->CALFACT) & 0x0000007FU); +} + +/** + * @brief Set the calibration factor to overwrite automatic conversion result. + * ADC must be enabled and no conversion is ongoing. + * @param hadc ADC handle + * @param CalibrationFactor Calibration factor (coded on 7 bits maximum) + * @retval HAL state + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_adc_is_conversion_on_going_regular; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CALFACT(CalibrationFactor)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Verification of hardware constraints before modifying the calibration */ + /* factors register: ADC must be enabled, no conversion on going. */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_conversion_on_going_regular == 0UL) + ) + { + hadc->Instance->CALFACT &= ~ADC_CALFACT_CALFACT; + hadc->Instance->CALFACT |= CalibrationFactor; + } + else + { + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + /* Update ADC error code */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + /* Update ADC state machine to error */ + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Analog watchdog 2 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow2Callback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 3 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow3Callback must be implemented in the user file. + */ +} + + +/** + * @brief End Of Sampling callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_EndOfSamplingCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC channel configuration ready callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_ChannelConfigReadyCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** + * @brief Disable ADC voltage regulator. + * @note Disabling voltage regulator allows to save power. This operation can + * be carried out only when ADC is disabled. + * @note To enable again the voltage regulator, the user is expected to + * resort to HAL_ADC_Init() API. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_DisableInternalRegulator(hadc->Instance); + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cec.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cec.c new file mode 100644 index 0000000..8bc18a0 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cec.c @@ -0,0 +1,1001 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cec.c + * @author MCD Application Team + * @brief CEC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the High Definition Multimedia Interface + * Consumer Electronics Control Peripheral (CEC). + * + Initialization and de-initialization function + * + IO operation function + * + Peripheral Control function + * + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The CEC HAL driver can be used as follow: + + (#) Declare a CEC_HandleTypeDef handle structure. + (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API: + (##) Enable the CEC interface clock. + (##) CEC pins configuration: + (+++) Enable the clock for the CEC GPIOs. + (+++) Configure these CEC pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT() + and HAL_CEC_Receive_IT() APIs): + (+++) Configure the CEC interrupt priority. + (+++) Enable the NVIC CEC IRQ handle. + (+++) The specific CEC interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit + and receive process. + + (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in + in case of Bit Rising Error, Error-Bit generation conditions, device logical + address and Listen mode in the hcec Init structure. + + (#) Initialize the CEC registers by calling the HAL_CEC_Init() API. + + [..] + (@) This API (HAL_CEC_Init()) configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc) + by calling the customed HAL_CEC_MspInit() API. + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_CEC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_CEC_RegisterCallback() or HAL_CEC_RegisterXXXCallback() + to register an interrupt callback. + + Function @ref HAL_CEC_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CEC MspInit. + (+) MspDeInitCallback : CEC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callback HAL_CEC_RxCpltCallback use dedicated register callbacks + @ref HAL_CEC_RegisterRxCpltCallback(). + + Use function @ref HAL_CEC_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_CEC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CEC MspInit. + (+) MspDeInitCallback : CEC MspDeInit. + + For callback HAL_CEC_RxCpltCallback use dedicated unregister callback : + @ref HAL_CEC_UnRegisterRxCpltCallback(). + + By default, after the @ref HAL_CEC_Init() and when the state is HAL_CEC_STATE_RESET + all callbacks are set to the corresponding weak functions : + examples @ref HAL_CEC_TxCpltCallback() , @ref HAL_CEC_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the @ref HAL_CEC_Init()/ @ref HAL_CEC_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the @ref HAL_CEC_Init() / @ref HAL_CEC_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + Callbacks can be registered/unregistered in HAL_CEC_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_CEC_STATE_READY or HAL_CEC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_CEC_RegisterCallback() before calling @ref HAL_CEC_DeInit() + or @ref HAL_CEC_Init() function. + + When the compilation define USE_HAL_CEC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CEC CEC + * @brief HAL CEC module driver + * @{ + */ +#ifdef HAL_CEC_MODULE_ENABLED +#if defined (CEC) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup CEC_Private_Constants CEC Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup CEC_Private_Functions CEC Private Functions + * @{ + */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup CEC_Exported_Functions CEC Exported Functions + * @{ + */ + +/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the CEC + (+) The following parameters need to be configured: + (++) SignalFreeTime + (++) Tolerance + (++) BRERxStop (RX stopped or not upon Bit Rising Error) + (++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error) + (++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error) + (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error) + (++) SignalFreeTimeOption (SFT Timer start definition) + (++) OwnAddress (CEC device address) + (++) ListenMode + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CEC mode according to the specified + * parameters in the CEC_InitTypeDef and creates the associated handle . + * @param hcec CEC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec) +{ + /* Check the CEC handle allocation */ + if ((hcec == NULL) || (hcec->Init.RxBuffer == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance)); + assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime)); + assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance)); + assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop)); + assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen)); + assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen)); + assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen)); + assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption)); + assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode)); + assert_param(IS_CEC_OWN_ADDRESS(hcec->Init.OwnAddress)); + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + if (hcec->gState == HAL_CEC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcec->Lock = HAL_UNLOCKED; + + hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hcec->MspInitCallback == NULL) + { + hcec->MspInitCallback = HAL_CEC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hcec->MspInitCallback(hcec); + } +#else + if (hcec->gState == HAL_CEC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcec->Lock = HAL_UNLOCKED; + /* Init the low level hardware : GPIO, CLOCK */ + HAL_CEC_MspInit(hcec); + } +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + + hcec->gState = HAL_CEC_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_CEC_DISABLE(hcec); + + /* Write to CEC Control Register */ + hcec->Instance->CFGR = hcec->Init.SignalFreeTime | hcec->Init.Tolerance | hcec->Init.BRERxStop | \ + hcec->Init.BREErrorBitGen | hcec->Init.LBPEErrorBitGen | hcec->Init.BroadcastMsgNoErrorBitGen | \ + hcec->Init.SignalFreeTimeOption | ((uint32_t)(hcec->Init.OwnAddress) << 16U) | \ + hcec->Init.ListenMode; + + /* Enable the following CEC Transmission/Reception interrupts as + * well as the following CEC Transmission/Reception Errors interrupts + * Rx Byte Received IT + * End of Reception IT + * Rx overrun + * Rx bit rising error + * Rx short bit period error + * Rx long bit period error + * Rx missing acknowledge + * Tx Byte Request IT + * End of Transmission IT + * Tx Missing Acknowledge IT + * Tx-Error IT + * Tx-Buffer Underrun IT + * Tx arbitration lost */ + __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND | + CEC_IER_TX_ALL_ERR); + + /* Enable the CEC Peripheral */ + __HAL_CEC_ENABLE(hcec); + + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + hcec->gState = HAL_CEC_STATE_READY; + hcec->RxState = HAL_CEC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the CEC peripheral + * @param hcec CEC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec) +{ + /* Check the CEC handle allocation */ + if (hcec == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance)); + + hcec->gState = HAL_CEC_STATE_BUSY; + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + if (hcec->MspDeInitCallback == NULL) + { + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hcec->MspDeInitCallback(hcec); + +#else + /* DeInit the low level hardware */ + HAL_CEC_MspDeInit(hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + + /* Disable the Peripheral */ + __HAL_CEC_DISABLE(hcec); + + /* Clear Flags */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND | CEC_FLAG_TXBR | CEC_FLAG_RXBR | CEC_FLAG_RXEND | CEC_ISR_ALL_ERROR); + + /* Disable the following CEC Transmission/Reception interrupts as + * well as the following CEC Transmission/Reception Errors interrupts + * Rx Byte Received IT + * End of Reception IT + * Rx overrun + * Rx bit rising error + * Rx short bit period error + * Rx long bit period error + * Rx missing acknowledge + * Tx Byte Request IT + * End of Transmission IT + * Tx Missing Acknowledge IT + * Tx-Error IT + * Tx-Buffer Underrun IT + * Tx arbitration lost */ + __HAL_CEC_DISABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND | + CEC_IER_TX_ALL_ERR); + + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + hcec->gState = HAL_CEC_STATE_RESET; + hcec->RxState = HAL_CEC_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hcec); + + return HAL_OK; +} + +/** + * @brief Initializes the Own Address of the CEC device + * @param hcec CEC handle + * @param CEC_OwnAddress The CEC own address. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress) +{ + /* Check the parameters */ + assert_param(IS_CEC_OWN_ADDRESS(CEC_OwnAddress)); + + if ((hcec->gState == HAL_CEC_STATE_READY) && (hcec->RxState == HAL_CEC_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcec); + + hcec->gState = HAL_CEC_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_CEC_DISABLE(hcec); + + if (CEC_OwnAddress != CEC_OWN_ADDRESS_NONE) + { + hcec->Instance->CFGR |= ((uint32_t)CEC_OwnAddress << 16); + } + else + { + hcec->Instance->CFGR &= ~(CEC_CFGR_OAR); + } + + hcec->gState = HAL_CEC_STATE_READY; + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hcec); + + /* Enable the Peripheral */ + __HAL_CEC_ENABLE(hcec); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief CEC MSP Init + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_MspInit can be implemented in the user file + */ +} + +/** + * @brief CEC MSP DeInit + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_MspDeInit can be implemented in the user file + */ +} +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User CEC Callback + * To be used instead of the weak predefined callback + * @param hcec CEC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID + * @arg @ref HAL_CEC_ERROR_CB_ID Error callback ID + * @arg @ref HAL_CEC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, + pCEC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hcec); + + if (hcec->gState == HAL_CEC_STATE_READY) + { + switch (CallbackID) + { + case HAL_CEC_TX_CPLT_CB_ID : + hcec->TxCpltCallback = pCallback; + break; + + case HAL_CEC_ERROR_CB_ID : + hcec->ErrorCallback = pCallback; + break; + + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = pCallback; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcec->gState == HAL_CEC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = pCallback; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + + return status; +} + +/** + * @brief Unregister an CEC Callback + * CEC callabck is redirected to the weak predefined callback + * @param hcec uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID + * @arg @ref HAL_CEC_ERROR_CB_ID Error callback ID + * @arg @ref HAL_CEC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hcec); + + if (hcec->gState == HAL_CEC_STATE_READY) + { + switch (CallbackID) + { + case HAL_CEC_TX_CPLT_CB_ID : + hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_CEC_ERROR_CB_ID : + hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = HAL_CEC_MspInit; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcec->gState == HAL_CEC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = HAL_CEC_MspInit; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + + return status; +} + +/** + * @brief Register CEC RX complete Callback + * To be used instead of the weak HAL_CEC_RxCpltCallback() predefined callback + * @param hcec CEC handle + * @param pCallback pointer to the Rx transfer compelete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hcec); + + if (HAL_CEC_STATE_READY == hcec->RxState) + { + hcec->RxCpltCallback = pCallback; + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + return status; +} + +/** + * @brief UnRegister CEC RX complete Callback + * CEC RX complete Callback is redirected to the weak HAL_CEC_RxCpltCallback() predefined callback + * @param hcec CEC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hcec); + + if (HAL_CEC_STATE_READY == hcec->RxState) + { + hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak CEC RxCpltCallback */ + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + return status; +} +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions + * @brief CEC Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the CEC data transfers. + + (#) The CEC handle must contain the initiator (TX side) and the destination (RX side) + logical addresses (4-bit long addresses, 0xF for broadcast messages destination) + + (#) The communication is performed using Interrupts. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated CEC IRQ when using Interrupt mode. + The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_CEC_ErrorCallback() user callback will be executed when a communication + error is detected + + (#) API's with Interrupt are : + (+) HAL_CEC_Transmit_IT() + (+) HAL_CEC_IRQHandler() + + (#) A set of User Callbacks are provided: + (+) HAL_CEC_TxCpltCallback() + (+) HAL_CEC_RxCpltCallback() + (+) HAL_CEC_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Send data in interrupt mode + * @param hcec CEC handle + * @param InitiatorAddress Initiator address + * @param DestinationAddress destination logical address + * @param pData pointer to input byte data buffer + * @param Size amount of data to be sent in bytes (without counting the header). + * 0 means only the header is sent (ping operation). + * Maximum TX size is 15 bytes (1 opcode and up to 14 operands). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, + uint8_t *pData, uint32_t Size) +{ + /* if the peripheral isn't already busy and if there is no previous transmission + already pending due to arbitration lost */ + if (hcec->gState == HAL_CEC_STATE_READY) + { + if ((pData == NULL) && (Size > 0U)) + { + return HAL_ERROR; + } + + assert_param(IS_CEC_ADDRESS(DestinationAddress)); + assert_param(IS_CEC_ADDRESS(InitiatorAddress)); + assert_param(IS_CEC_MSGSIZE(Size)); + + /* Process Locked */ + __HAL_LOCK(hcec); + hcec->pTxBuffPtr = pData; + hcec->gState = HAL_CEC_STATE_BUSY_TX; + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + + /* initialize the number of bytes to send, + * 0 means only one header is sent (ping operation) */ + hcec->TxXferCount = (uint16_t)Size; + + /* in case of no payload (Size = 0), sender is only pinging the system; + Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */ + if (Size == 0U) + { + __HAL_CEC_LAST_BYTE_TX_SET(hcec); + } + + /* send header block */ + hcec->Instance->TXDR = (uint32_t)(((uint32_t)InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress); + + /* Set TX Start of Message (TXSOM) bit */ + __HAL_CEC_FIRST_BYTE_TX_SET(hcec); + + /* Process Unlocked */ + __HAL_UNLOCK(hcec); + + return HAL_OK; + + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Get size of the received frame. + * @param hcec CEC handle + * @retval Frame size + */ +uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec) +{ + return hcec->RxXferSize; +} + +/** + * @brief Change Rx Buffer. + * @param hcec CEC handle + * @param Rxbuffer Rx Buffer + * @note This function can be called only inside the HAL_CEC_RxCpltCallback() + * @retval Frame size + */ +void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer) +{ + hcec->Init.RxBuffer = Rxbuffer; +} + +/** + * @brief This function handles CEC interrupt requests. + * @param hcec CEC handle + * @retval None + */ +void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec) +{ + + /* save interrupts register for further error or interrupts handling purposes */ + uint32_t reg; + reg = hcec->Instance->ISR; + + + /* ----------------------------Arbitration Lost Management----------------------------------*/ + /* CEC TX arbitration error interrupt occurred --------------------------------------*/ + if ((reg & CEC_FLAG_ARBLST) != 0U) + { + hcec->ErrorCode = HAL_CEC_ERROR_ARBLST; + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST); + } + + /* ----------------------------Rx Management----------------------------------*/ + /* CEC RX byte received interrupt ---------------------------------------------------*/ + if ((reg & CEC_FLAG_RXBR) != 0U) + { + /* reception is starting */ + hcec->RxState = HAL_CEC_STATE_BUSY_RX; + hcec->RxXferSize++; + /* read received byte */ + *hcec->Init.RxBuffer = (uint8_t) hcec->Instance->RXDR; + hcec->Init.RxBuffer++; + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR); + } + + /* CEC RX end received interrupt ---------------------------------------------------*/ + if ((reg & CEC_FLAG_RXEND) != 0U) + { + /* clear IT */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND); + + /* Rx process is completed, restore hcec->RxState to Ready */ + hcec->RxState = HAL_CEC_STATE_READY; + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + hcec->Init.RxBuffer -= hcec->RxXferSize; +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) + hcec->RxCpltCallback(hcec, hcec->RxXferSize); +#else + HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + hcec->RxXferSize = 0U; + } + + /* ----------------------------Tx Management----------------------------------*/ + /* CEC TX byte request interrupt ------------------------------------------------*/ + if ((reg & CEC_FLAG_TXBR) != 0U) + { + if (hcec->TxXferCount == 0U) + { + /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */ + __HAL_CEC_LAST_BYTE_TX_SET(hcec); + hcec->Instance->TXDR = *hcec->pTxBuffPtr; + hcec->pTxBuffPtr++; + } + else + { + hcec->Instance->TXDR = *hcec->pTxBuffPtr; + hcec->pTxBuffPtr++; + hcec->TxXferCount--; + } + /* clear Tx-Byte request flag */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR); + } + + /* CEC TX end interrupt ------------------------------------------------*/ + if ((reg & CEC_FLAG_TXEND) != 0U) + { + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND); + + /* Tx process is ended, restore hcec->gState to Ready */ + hcec->gState = HAL_CEC_STATE_READY; + /* Call the Process Unlocked before calling the Tx call back API to give the possibility to + start again the Transmission under the Tx call back API */ + __HAL_UNLOCK(hcec); + hcec->ErrorCode = HAL_CEC_ERROR_NONE; +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) + hcec->TxCpltCallback(hcec); +#else + HAL_CEC_TxCpltCallback(hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + } + + /* ----------------------------Rx/Tx Error Management----------------------------------*/ + if ((reg & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE | CEC_ISR_TXUDR | CEC_ISR_TXERR | + CEC_ISR_TXACKE)) != 0U) + { + hcec->ErrorCode = reg; + __HAL_CEC_CLEAR_FLAG(hcec, HAL_CEC_ERROR_RXOVR | HAL_CEC_ERROR_BRE | CEC_FLAG_LBPE | CEC_FLAG_SBPE | + HAL_CEC_ERROR_RXACKE | HAL_CEC_ERROR_TXUDR | HAL_CEC_ERROR_TXERR | HAL_CEC_ERROR_TXACKE); + + + if ((reg & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE)) != 0U) + { + hcec->Init.RxBuffer -= hcec->RxXferSize; + hcec->RxXferSize = 0U; + hcec->RxState = HAL_CEC_STATE_READY; + } + else if (((reg & CEC_ISR_ARBLST) == 0U) && ((reg & (CEC_ISR_TXUDR | CEC_ISR_TXERR | CEC_ISR_TXACKE)) != 0U)) + { + /* Set the CEC state ready to be able to start again the process */ + hcec->gState = HAL_CEC_STATE_READY; + } + else + { + /* Nothing todo*/ + } +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) + hcec->ErrorCallback(hcec); +#else + /* Error Call Back */ + HAL_CEC_ErrorCallback(hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + } + else + { + /* Nothing todo*/ + } +} + +/** + * @brief Tx Transfer completed callback + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback + * @param hcec CEC handle + * @param RxFrameSize Size of frame + * @retval None + */ +__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + UNUSED(RxFrameSize); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief CEC error callbacks + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_ErrorCallback can be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function + * @brief CEC control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control function ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the CEC. + (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral. + (+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral. +@endverbatim + * @{ + */ +/** + * @brief return the CEC state + * @param hcec pointer to a CEC_HandleTypeDef structure that contains + * the configuration information for the specified CEC module. + * @retval HAL state + */ +HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec) +{ + uint32_t temp1, temp2; + temp1 = hcec->gState; + temp2 = hcec->RxState; + + return (HAL_CEC_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the CEC error code + * @param hcec pointer to a CEC_HandleTypeDef structure that contains + * the configuration information for the specified CEC. + * @retval CEC Error Code + */ +uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec) +{ + return hcec->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* CEC */ +#endif /* HAL_CEC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_comp.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_comp.c new file mode 100644 index 0000000..7eddc60 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_comp.c @@ -0,0 +1,1156 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_comp.c + * @author MCD Application Team + * @brief COMP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the COMP peripheral: + * + Initialization and de-initialization functions + * + Start/Stop operation functions in polling mode + * + Start/Stop operation functions in interrupt mode (through EXTI interrupt) + * + Peripheral control functions + * + Peripheral state functions + * + @verbatim +================================================================================ + ##### COMP Peripheral features ##### +================================================================================ + + [..] + The STM32G0xx device family integrates two analog comparators instances: + COMP1, COMP2. + (#) Comparators input minus (inverting input) and input plus (non inverting input) + can be set to internal references or to GPIO pins + (refer to GPIO list in reference manual). + + (#) Comparators output level is available using HAL_COMP_GetOutputLevel() + and can be redirected to other peripherals: GPIO pins (in mode + alternate functions for comparator), timers. + (refer to GPIO list in reference manual). + + (#) The comparators have interrupt capability through the EXTI controller + with wake-up from sleep and stop modes. + + (#) Pairs of comparators instances can be combined in window mode + (2 consecutive instances odd and even COMP and COMP). + + From the corresponding IRQ handler, the right interrupt source can be retrieved + using macro __HAL_COMP_COMPx_EXTI_GET_FLAG(). + + ##### How to use this driver ##### +================================================================================ + [..] + This driver provides functions to configure and program the comparator instances + of STM32G0xx devices. + + To use the comparator, perform the following steps: + + (#) Initialize the COMP low level resources by implementing the HAL_COMP_MspInit(): + (++) Configure the GPIO connected to comparator inputs plus and minus in analog mode + using HAL_GPIO_Init(). + (++) If needed, configure the GPIO connected to comparator output in alternate function mode + using HAL_GPIO_Init(). + (++) If required enable the COMP interrupt by configuring and enabling EXTI line in Interrupt mode and + selecting the desired sensitivity level using HAL_GPIO_Init() function. After that enable the comparator + interrupt vector using HAL_NVIC_EnableIRQ() function. + + (#) Configure the comparator using HAL_COMP_Init() function: + (++) Select the input minus (inverting input) + (++) Select the input plus (non-inverting input) + (++) Select the hysteresis + (++) Select the blanking source + (++) Select the output polarity + (++) Select the power mode + (++) Select the window mode + + -@@- HAL_COMP_Init() calls internally __HAL_RCC_SYSCFG_CLK_ENABLE() + to enable internal control clock of the comparators. + However, this is a legacy strategy. In future STM32 families, + COMP clock enable must be implemented by user in "HAL_COMP_MspInit()". + Therefore, for compatibility anticipation, it is recommended to + implement __HAL_RCC_SYSCFG_CLK_ENABLE() in "HAL_COMP_MspInit()". + + (#) Reconfiguration on-the-fly of comparator can be done by calling again + function HAL_COMP_Init() with new input structure parameters values. + + (#) Enable the comparator using HAL_COMP_Start() function. + + (#) Use HAL_COMP_TriggerCallback() or HAL_COMP_GetOutputLevel() functions + to manage comparator outputs (events and output level). + + (#) Disable the comparator using HAL_COMP_Stop() function. + + (#) De-initialize the comparator using HAL_COMP_DeInit() function. + + (#) For safety purpose, comparator configuration can be locked using HAL_COMP_Lock() function. + The only way to unlock the comparator is a device hardware reset. + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_COMP_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_COMP_RegisterCallback() + to register an interrupt callback. + [..] + + Function HAL_COMP_RegisterCallback() allows to register following callbacks: + (+) TriggerCallback : callback for COMP trigger. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function HAL_COMP_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + HAL_COMP_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TriggerCallback : callback for COMP trigger. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + + By default, after the HAL_COMP_Init() and when the state is HAL_COMP_STATE_RESET + all callbacks are set to the corresponding weak functions: + example HAL_COMP_TriggerCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_COMP_Init()/ HAL_COMP_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the HAL_COMP_Init()/ HAL_COMP_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in HAL_COMP_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_COMP_STATE_READY or HAL_COMP_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_COMP_RegisterCallback() before calling HAL_COMP_DeInit() + or HAL_COMP_Init() function. + [..] + + When the compilation flag USE_HAL_COMP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_COMP_MODULE_ENABLED + +#if defined (COMP1) || defined (COMP2) + +/** @defgroup COMP COMP + * @brief COMP HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup COMP_Private_Constants + * @{ + */ + +/* Delay for COMP startup time. */ +/* Note: Delay required to reach propagation delay specification. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define COMP_DELAY_STARTUP_US (80UL) /*!< Delay for COMP startup time */ + +/* Delay for COMP voltage scaler stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART_SCALER"). */ +/* Unit: us */ +#define COMP_DELAY_VOLTAGE_SCALER_STAB_US (200UL) /*!< Delay for COMP voltage scaler stabilization time */ + +#define COMP_OUTPUT_LEVEL_BITOFFSET_POS (30UL) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and de-initialization functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions to initialize and de-initialize comparators + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the COMP according to the specified + * parameters in the COMP_InitTypeDef and initialize the associated handle. + * @note If the selected comparator is locked, initialization can't be performed. + * To unlock the configuration, perform a system reset. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp) +{ + uint32_t tmp_csr; + uint32_t exti_line; + uint32_t comp_voltage_scaler_initialized; /* Value "0" if comparator voltage scaler is not initialized */ + __IO uint32_t wait_loop_index = 0UL; + HAL_StatusTypeDef status = HAL_OK; +#if defined(COMP3) + __IO uint32_t * comp_common_odd; + __IO uint32_t * comp_common_even; +#endif + + /* Check the COMP handle allocation and lock status */ + if(hcomp == NULL) + { + status = HAL_ERROR; + } + else if(__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + assert_param(IS_COMP_INPUT_PLUS(hcomp->Instance, hcomp->Init.InputPlus)); + assert_param(IS_COMP_INPUT_MINUS(hcomp->Instance, hcomp->Init.InputMinus)); + assert_param(IS_COMP_OUTPUTPOL(hcomp->Init.OutputPol)); + assert_param(IS_COMP_POWERMODE(hcomp->Init.Mode)); + assert_param(IS_COMP_HYSTERESIS(hcomp->Init.Hysteresis)); + assert_param(IS_COMP_BLANKINGSRC_INSTANCE(hcomp->Instance, hcomp->Init.BlankingSrce)); + assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode)); + assert_param(IS_COMP_WINDOWMODE(hcomp->Instance, hcomp->Init.WindowMode)); + if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLE) + { + assert_param(IS_COMP_WINDOWOUTPUT(hcomp->Init.WindowOutput)); + } + + if(hcomp->State == HAL_COMP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcomp->Lock = HAL_UNLOCKED; + + /* Set COMP error code to none */ + COMP_CLEAR_ERRORCODE(hcomp); + + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + /* Init the COMP Callback settings */ + hcomp->TriggerCallback = HAL_COMP_TriggerCallback; /* Legacy weak callback */ + + if (hcomp->MspInitCallback == NULL) + { + hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + /* Note: Internal control clock of the comparators must */ + /* be enabled in "HAL_COMP_MspInit()" */ + /* using "__HAL_RCC_SYSCFG_CLK_ENABLE()". */ + hcomp->MspInitCallback(hcomp); +#else + /* Init the low level hardware */ + /* Note: Internal control clock of the comparators must */ + /* be enabled in "HAL_COMP_MspInit()" */ + /* using "__HAL_RCC_SYSCFG_CLK_ENABLE()". */ + HAL_COMP_MspInit(hcomp); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + } + + /* Memorize voltage scaler state before initialization */ + comp_voltage_scaler_initialized = READ_BIT(hcomp->Instance->CSR, (COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0)); + + /* Set COMP parameters */ + tmp_csr = ( hcomp->Init.InputMinus + | hcomp->Init.InputPlus + | hcomp->Init.BlankingSrce + | hcomp->Init.Hysteresis + | hcomp->Init.OutputPol + | hcomp->Init.Mode + ); + + /* Set parameters in COMP register */ + /* Note: Update all bits except read-only, lock and enable bits */ + MODIFY_REG(hcomp->Instance->CSR, + COMP_CSR_PWRMODE | COMP_CSR_INMSEL | COMP_CSR_INPSEL | + COMP_CSR_WINMODE | COMP_CSR_POLARITY | COMP_CSR_HYST | + COMP_CSR_BLANKING , + tmp_csr + ); + + /* Set window mode */ + /* Note: Window mode bit is located into 1 out of the 2 pairs of COMP */ + /* instances. Therefore, this function can update another COMP */ + /* instance that the one currently selected. */ +#if defined(COMP3) + if(hcomp->Instance == COMP3) + { + /* Note: Exception for STM32G0 devices featuring ADC3 instance: in common */ + /* group of COMP2 and COMP3, instances odd and even are inverted. */ + /* Perform switch of parameter selected. */ + comp_common_odd = &(COMP23_COMMON->CSR_EVEN); + comp_common_even = &(COMP23_COMMON->CSR_ODD); + } + else + { + comp_common_odd = &(COMP12_COMMON->CSR_ODD); + comp_common_even = &(COMP12_COMMON->CSR_EVEN); + } + + if(hcomp->Init.WindowMode == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON) + { + CLEAR_BIT(*comp_common_odd, COMP_CSR_WINMODE); + SET_BIT(*comp_common_even, COMP_CSR_WINMODE); + } + else if(hcomp->Init.WindowMode == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) + { + SET_BIT(*comp_common_odd, COMP_CSR_WINMODE); + CLEAR_BIT(*comp_common_even, COMP_CSR_WINMODE); + } + else + { + CLEAR_BIT(*comp_common_odd, COMP_CSR_WINMODE); + CLEAR_BIT(*comp_common_even, COMP_CSR_WINMODE); + } + + /* Set window mode output */ + /* Note: Window mode mode output can also be used when window mode */ + /* is disabled, to use comparators in independent mode with their */ + /* output connected through exclusive-or circuitry. */ + switch (hcomp->Init.WindowOutput) + { + case COMP_WINDOWOUTPUT_COMP1: /* idem COMP_WINDOWOUTPUT_COMP3 (same literal value) */ + SET_BIT(*comp_common_odd, COMP_CSR_WINOUT); + CLEAR_BIT(*comp_common_even, COMP_CSR_WINOUT); + break; + + case COMP_WINDOWOUTPUT_COMP2: + CLEAR_BIT(*comp_common_odd, COMP_CSR_WINOUT); + SET_BIT(*comp_common_even, COMP_CSR_WINOUT); + break; + + case COMP_WINDOWOUTPUT_BOTH: + SET_BIT(*comp_common_odd, COMP_CSR_WINOUT); + SET_BIT(*comp_common_even, COMP_CSR_WINOUT); + break; + + default: /* COMP_WINDOWOUTPUT_EACH_COMP */ + CLEAR_BIT(*comp_common_odd, COMP_CSR_WINOUT); + CLEAR_BIT(*comp_common_even, COMP_CSR_WINOUT); + break; + } +#else + if(hcomp->Init.WindowMode == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON) + { + CLEAR_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINMODE); + SET_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + } + else if(hcomp->Init.WindowMode == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) + { + SET_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINMODE); + CLEAR_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + } + else + { + CLEAR_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINMODE); + CLEAR_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + } + + /* Set window mode output */ + /* Note: Window mode mode output can also be used when window mode */ + /* is disabled, to use comparators in independent mode with their */ + /* output connected through exclusive-or circuitry. */ + switch (hcomp->Init.WindowOutput) + { + case COMP_WINDOWOUTPUT_COMP1: + SET_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINOUT); + CLEAR_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINOUT); + break; + + case COMP_WINDOWOUTPUT_COMP2: + CLEAR_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINOUT); + SET_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINOUT); + break; + + case COMP_WINDOWOUTPUT_BOTH: + SET_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINOUT); + SET_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINOUT); + break; + + default: /* COMP_WINDOWOUTPUT_EACH_COMP */ + CLEAR_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINOUT); + CLEAR_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINOUT); + break; + } +#endif + + /* Delay for COMP scaler bridge voltage stabilization */ + /* Apply the delay if voltage scaler bridge is required and not already enabled */ + if ((READ_BIT(hcomp->Instance->CSR, (COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0)) != 0UL) && + (comp_voltage_scaler_initialized == 0UL) ) + { + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + while(wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* Get the EXTI line corresponding to the selected COMP instance */ + exti_line = COMP_GET_EXTI_LINE(hcomp->Instance); + + /* Manage EXTI settings */ + if((hcomp->Init.TriggerMode & (COMP_EXTI_IT | COMP_EXTI_EVENT)) != 0UL) + { + /* Configure EXTI rising edge */ + if((hcomp->Init.TriggerMode & COMP_EXTI_RISING) != 0UL) + { + LL_EXTI_EnableRisingTrig_0_31(exti_line); + } + else + { + LL_EXTI_DisableRisingTrig_0_31(exti_line); + } + + /* Configure EXTI falling edge */ + if((hcomp->Init.TriggerMode & COMP_EXTI_FALLING) != 0UL) + { + LL_EXTI_EnableFallingTrig_0_31(exti_line); + } + else + { + LL_EXTI_DisableFallingTrig_0_31(exti_line); + } + + /* Clear COMP EXTI pending bit (if any) */ + LL_EXTI_ClearRisingFlag_0_31(exti_line); + LL_EXTI_ClearFallingFlag_0_31(exti_line); + + /* Configure EXTI event mode */ + if((hcomp->Init.TriggerMode & COMP_EXTI_EVENT) != 0UL) + { + LL_EXTI_EnableEvent_0_31(exti_line); + } + else + { + LL_EXTI_DisableEvent_0_31(exti_line); + } + + /* Configure EXTI interrupt mode */ + if((hcomp->Init.TriggerMode & COMP_EXTI_IT) != 0UL) + { + LL_EXTI_EnableIT_0_31(exti_line); + } + else + { + LL_EXTI_DisableIT_0_31(exti_line); + } + } + else + { + /* Disable EXTI event mode */ + LL_EXTI_DisableEvent_0_31(exti_line); + + /* Disable EXTI interrupt mode */ + LL_EXTI_DisableIT_0_31(exti_line); + } + + /* Set HAL COMP handle state */ + /* Note: Transition from state reset to state ready, */ + /* otherwise (coming from state ready or busy) no state update. */ + if (hcomp->State == HAL_COMP_STATE_RESET) + { + hcomp->State = HAL_COMP_STATE_READY; + } + } + + return status; +} + +/** + * @brief DeInitialize the COMP peripheral. + * @note Deinitialization cannot be performed if the COMP configuration is locked. + * To unlock the configuration, perform a system reset. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if(hcomp == NULL) + { + status = HAL_ERROR; + } + else if(__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Set COMP_CSR register to reset value */ + WRITE_REG(hcomp->Instance->CSR, 0x00000000UL); + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + if (hcomp->MspDeInitCallback == NULL) + { + hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, RCC clock, NVIC */ + hcomp->MspDeInitCallback(hcomp); +#else + /* DeInit the low level hardware: GPIO, RCC clock, NVIC */ + HAL_COMP_MspDeInit(hcomp); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + + /* Set HAL COMP handle state */ + hcomp->State = HAL_COMP_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcomp); + } + + return status; +} + +/** + * @brief Initialize the COMP MSP. + * @param hcomp COMP handle + * @retval None + */ +__weak void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the COMP MSP. + * @param hcomp COMP handle + * @retval None + */ +__weak void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User COMP Callback + * To be used instead of the weak predefined callback + * @param hcomp Pointer to a COMP_HandleTypeDef structure that contains + * the configuration information for the specified COMP. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_COMP_TRIGGER_CB_ID Trigger callback ID + * @arg @ref HAL_COMP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_COMP_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, pCOMP_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_COMP_STATE_READY == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_TRIGGER_CB_ID : + hcomp->TriggerCallback = pCallback; + break; + + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = pCallback; + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_COMP_STATE_RESET == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = pCallback; + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a COMP Callback + * COMP callback is redirected to the weak predefined callback + * @param hcomp Pointer to a COMP_HandleTypeDef structure that contains + * the configuration information for the specified COMP. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_COMP_TRIGGER_CB_ID Trigger callback ID + * @arg @ref HAL_COMP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_COMP_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_COMP_STATE_READY == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_TRIGGER_CB_ID : + hcomp->TriggerCallback = HAL_COMP_TriggerCallback; /* Legacy weak callback */ + break; + + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_COMP_STATE_RESET == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group2 Start-Stop operation functions + * @brief Start-Stop operation functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start a comparator instance. + (+) Stop a comparator instance. + +@endverbatim + * @{ + */ + +/** + * @brief Start the comparator. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp) +{ + __IO uint32_t wait_loop_index = 0UL; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if(hcomp == NULL) + { + status = HAL_ERROR; + } + else if(__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if(hcomp->State == HAL_COMP_STATE_READY) + { + /* Enable the selected comparator */ + SET_BIT(hcomp->Instance->CSR, COMP_CSR_EN); + + /* Set HAL COMP handle state */ + hcomp->State = HAL_COMP_STATE_BUSY; + + /* Delay for COMP startup time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + while(wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Stop the comparator. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if(hcomp == NULL) + { + status = HAL_ERROR; + } + else if(__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Check compliant states: HAL_COMP_STATE_READY or HAL_COMP_STATE_BUSY */ + /* (all states except HAL_COMP_STATE_RESET and except locked status. */ + if(hcomp->State != HAL_COMP_STATE_RESET) + { + /* Disable the selected comparator */ + CLEAR_BIT(hcomp->Instance->CSR, COMP_CSR_EN); + + /* Set HAL COMP handle state */ + hcomp->State = HAL_COMP_STATE_READY; + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Comparator IRQ handler. + * @param hcomp COMP handle + * @retval None + */ +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp) +{ + /* Get the EXTI line corresponding to the selected COMP instance */ + uint32_t exti_line = COMP_GET_EXTI_LINE(hcomp->Instance); + uint32_t comparator_window_mode; + uint32_t comparator_window_exti_lines; + +#if defined(COMP3) + if(hcomp->Instance == COMP3) + { + /* Case of window mode with COMP2 and COMP3 */ + comparator_window_mode = READ_BIT(COMP23_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + comparator_window_exti_lines = (COMP_EXTI_LINE_COMP2 | COMP_EXTI_LINE_COMP3); + } + else + { + comparator_window_mode = READ_BIT(COMP23_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + if( (hcomp->Instance == COMP2) && (comparator_window_mode != 0UL)) + { + /* Case of window mode with COMP2 and COMP3 */ + comparator_window_exti_lines = (COMP_EXTI_LINE_COMP2 | COMP_EXTI_LINE_COMP3); + } + else + { + /* Case of window mode with COMP1 and COMP2 */ + comparator_window_mode = READ_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINMODE); + comparator_window_mode |= READ_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + comparator_window_exti_lines = (COMP_EXTI_LINE_COMP1 | COMP_EXTI_LINE_COMP2); + } + } +#else + comparator_window_mode = READ_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINMODE); + comparator_window_mode |= READ_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINMODE); + comparator_window_exti_lines = (COMP_EXTI_LINE_COMP1 | COMP_EXTI_LINE_COMP2); +#endif + + /* Check COMP EXTI flag */ + if(LL_EXTI_IsActiveRisingFlag_0_31(exti_line) != 0UL) + { + /* Check whether comparator is in independent or window mode */ + if(comparator_window_mode != 0UL) + { + /* Clear COMP EXTI line pending bit of the pair of comparators */ + /* in window mode. */ + /* Note: Pair of comparators in window mode can both trig IRQ when */ + /* input voltage is changing from "out of window" area */ + /* (low or high ) to the other "out of window" area (high or low).*/ + /* Both flags must be cleared to call comparator trigger */ + /* callback is called once. */ + LL_EXTI_ClearRisingFlag_0_31(comparator_window_exti_lines); + } + else + { + /* Clear COMP EXTI line pending bit */ + LL_EXTI_ClearRisingFlag_0_31(exti_line); + } + + /* COMP trigger user callback */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + hcomp->TriggerCallback(hcomp); +#else + HAL_COMP_TriggerCallback(hcomp); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + } + else if(LL_EXTI_IsActiveFallingFlag_0_31(exti_line) != 0UL) + { + /* Check whether comparator is in independent or window mode */ + if(comparator_window_mode != 0UL) + { + /* Clear COMP EXTI line pending bit of the pair of comparators */ + /* in window mode. */ + /* Note: Pair of comparators in window mode can both trig IRQ when */ + /* input voltage is changing from "out of window" area */ + /* (low or high ) to the other "out of window" area (high or low).*/ + /* Both flags must be cleared to call comparator trigger */ + /* callback is called once. */ + LL_EXTI_ClearFallingFlag_0_31(comparator_window_exti_lines); + } + else + { + /* Clear COMP EXTI line pending bit */ + LL_EXTI_ClearFallingFlag_0_31(exti_line); + } + + /* COMP trigger callback */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + hcomp->TriggerCallback(hcomp); +#else + HAL_COMP_TriggerCallback(hcomp); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + } + else + { + /* nothing to do */ + } +} + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions + * @brief Management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the comparators. + +@endverbatim + * @{ + */ + +/** + * @brief Lock the selected comparator configuration. + * @note A system reset is required to unlock the comparator configuration. + * @note Locking the comparator from reset state is possible + * if __HAL_RCC_SYSCFG_CLK_ENABLE() is being called before. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if(hcomp == NULL) + { + status = HAL_ERROR; + } + else if(__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Set HAL COMP handle state */ + switch(hcomp->State) + { + case HAL_COMP_STATE_RESET: + hcomp->State = HAL_COMP_STATE_RESET_LOCKED; + break; + case HAL_COMP_STATE_READY: + hcomp->State = HAL_COMP_STATE_READY_LOCKED; + break; + default: /* HAL_COMP_STATE_BUSY */ + hcomp->State = HAL_COMP_STATE_BUSY_LOCKED; + break; + } + } + + if(status == HAL_OK) + { + /* Set the lock bit corresponding to selected comparator */ + __HAL_COMP_LOCK(hcomp); + } + + return status; +} + +/** + * @brief Return the output level (high or low) of the selected comparator. + * The output level depends on the selected polarity. + * If the polarity is not inverted: + * - Comparator output is low when the input plus is at a lower + * voltage than the input minus + * - Comparator output is high when the input plus is at a higher + * voltage than the input minus + * If the polarity is inverted: + * - Comparator output is high when the input plus is at a lower + * voltage than the input minus + * - Comparator output is low when the input plus is at a higher + * voltage than the input minus + * @param hcomp COMP handle + * @retval Returns the selected comparator output level: + * @arg COMP_OUTPUT_LEVEL_LOW + * @arg COMP_OUTPUT_LEVEL_HIGH + * + */ +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp) +{ + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + return (uint32_t)(READ_BIT(hcomp->Instance->CSR, COMP_CSR_VALUE) + >> COMP_OUTPUT_LEVEL_BITOFFSET_POS); +} + +/** + * @brief Comparator trigger callback. + * @param hcomp COMP handle + * @retval None + */ +__weak void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_TriggerCallback should be implemented in the user file + */ +} + + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the COMP handle state. + * @param hcomp COMP handle + * @retval HAL state + */ +HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp) +{ + /* Check the COMP handle allocation */ + if(hcomp == NULL) + { + return HAL_COMP_STATE_RESET; + } + + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Return HAL COMP handle state */ + return hcomp->State; +} + +/** + * @brief Return the COMP error code. + * @param hcomp COMP handle + * @retval COMP error code + */ +uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp) +{ + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + return hcomp->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 || COMP2 */ + +#endif /* HAL_COMP_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c new file mode 100644 index 0000000..6f99df3 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c @@ -0,0 +1,417 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex M0+ exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + -@- Negative value of IRQn_Type are not allowed. + + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x03). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32g0xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number . + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to stm32g0xx.h file) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 3. + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * with stm32g0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0+ based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn,PreemptPriority); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn) +{ + /* Get priority for Cortex-M system or device specific interrupts */ + return NVIC_GetPriority(IRQn); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Configure the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if (__MPU_PRESENT == 1U) +/** + * @brief Enable the MPU. + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + + +/** + * @brief Disable the MPU. + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != 0U) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00U; + MPU->RASR = 0x00U; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c new file mode 100644 index 0000000..63d98ea --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c @@ -0,0 +1,518 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc.c + * @author MCD Application Team + * @brief CRC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cyclic Redundancy Check (CRC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); + (+) Initialize CRC calculator + (++) specify generating polynomial (peripheral default or non-default one) + (++) specify initialization value (peripheral default or non-default one) + (++) specify input data format + (++) specify input or output data inversion mode if any + (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the + input data buffer starting with the previously computed CRC as + initialization value + (+) Use HAL_CRC_Calculate() function to compute the CRC value of the + input data buffer starting with the defined initialization value + (default or non-default) to initiate CRC calculation + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CRC CRC + * @brief CRC HAL module driver. + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup CRC_Private_Functions CRC Private Functions + * @{ + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength); +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP (MCU Specific Package) + (+) DeInitialize the CRC MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the CRC according to the specified + * parameters in the CRC_InitTypeDef and create the associated handle. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + if (hcrc->State == HAL_CRC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcrc->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_CRC_MspInit(hcrc); + } + + hcrc->State = HAL_CRC_STATE_BUSY; + + /* check whether or not non-default generating polynomial has been + * picked up by user */ + assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse)); + if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE) + { + /* initialize peripheral with default generating polynomial */ + WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B); + } + else + { + /* initialize CRC peripheral with generating polynomial defined by user */ + if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* check whether or not non-default CRC initial value has been + * picked up by user */ + assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse)); + if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE) + { + WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE); + } + else + { + WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue); + } + + + /* set input data inversion mode */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode); + + /* set output data inversion mode */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode); + + /* makes sure the input data format (bytes, halfwords or words stream) + * is properly specified by user */ + assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the CRC peripheral. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + /* Check the CRC peripheral state */ + if (hcrc->State == HAL_CRC_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC calculation unit */ + __HAL_CRC_DR_RESET(hcrc); + + /* Reset IDR register content */ + CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR); + + /* DeInit the low level hardware */ + HAL_CRC_MspDeInit(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + using combination of the previous CRC value and the new one. + + [..] or + + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + independently of the previous CRC value. + +@endverbatim + * @{ + */ + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with the previously computed CRC as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter Data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with hcrc->Instance->INIT as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC Calculation Unit (hcrc->Instance->INIT is + * written in hcrc->Instance->DR) */ + __HAL_CRC_DR_RESET(hcrc); + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter 32-bit input data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + /* Specific 8-bit input data handling */ + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + /* Specific 16-bit input data handling */ + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the CRC handle state. + * @param hcrc CRC handle + * @retval HAL state + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) +{ + /* Return CRC handle state */ + return hcrc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Enter 8-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + uint16_t data; + __IO uint16_t *pReg; + + /* Processing time optimization: 4 bytes are entered in a row with a single word write, + * last bytes must be carefully fed to the CRC calculator to ensure a correct type + * handling by the peripheral */ + for (i = 0U; i < (BufferLength / 4U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[4U * i] << 24U) | \ + ((uint32_t)pBuffer[(4U * i) + 1U] << 16U) | \ + ((uint32_t)pBuffer[(4U * i) + 2U] << 8U) | \ + (uint32_t)pBuffer[(4U * i) + 3U]; + } + /* last bytes specific handling */ + if ((BufferLength % 4U) != 0U) + { + if ((BufferLength % 4U) == 1U) + { + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[4U * i]; /* Derogation MisraC2012 R.11.5 */ + } + if ((BufferLength % 4U) == 2U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + } + if ((BufferLength % 4U) == 3U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[(4U * i) + 2U]; /* Derogation MisraC2012 R.11.5 */ + } + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @brief Enter 16-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + __IO uint16_t *pReg; + + /* Processing time optimization: 2 HalfWords are entered in a row with a single word write, + * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure + * a correct type handling by the peripheral */ + for (i = 0U; i < (BufferLength / 2U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[2U * i] << 16U) | (uint32_t)pBuffer[(2U * i) + 1U]; + } + if ((BufferLength % 2U) != 0U) + { + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = pBuffer[2U * i]; + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @} + */ + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c new file mode 100644 index 0000000..e08c8dc --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c @@ -0,0 +1,225 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc_ex.c + * @author MCD Application Team + * @brief Extended CRC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the CRC peripheral. + * + @verbatim +================================================================================ + ##### How to use this driver ##### +================================================================================ + [..] + (+) Set user-defined generating polynomial through HAL_CRCEx_Polynomial_Set() + (+) Configure Input or Output data inversion + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CRCEx CRCEx + * @brief CRC Extended HAL module driver + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRCEx_Exported_Functions CRC Extended Exported Functions + * @{ + */ + +/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions + * @brief Extended Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Extended configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the generating polynomial + (+) Configure the input data inversion + (+) Configure the output data inversion + +@endverbatim + * @{ + */ + + +/** + * @brief Initialize the CRC polynomial if different from default one. + * @param hcrc CRC handle + * @param Pol CRC generating polynomial (7, 8, 16 or 32-bit long). + * This parameter is written in normal representation, e.g. + * @arg for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @arg for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021 + * @param PolyLength CRC polynomial length. + * This parameter can be one of the following values: + * @arg @ref CRC_POLYLENGTH_7B 7-bit long CRC (generating polynomial of degree 7) + * @arg @ref CRC_POLYLENGTH_8B 8-bit long CRC (generating polynomial of degree 8) + * @arg @ref CRC_POLYLENGTH_16B 16-bit long CRC (generating polynomial of degree 16) + * @arg @ref CRC_POLYLENGTH_32B 32-bit long CRC (generating polynomial of degree 32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t msb = 31U; /* polynomial degree is 32 at most, so msb is initialized to max value */ + + /* Check the parameters */ + assert_param(IS_CRC_POL_LENGTH(PolyLength)); + + /* check polynomial definition vs polynomial size: + * polynomial length must be aligned with polynomial + * definition. HAL_ERROR is reported if Pol degree is + * larger than that indicated by PolyLength. + * Look for MSB position: msb will contain the degree of + * the second to the largest polynomial member. E.g., for + * X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */ + while ((msb-- > 0U) && ((Pol & ((uint32_t)(0x1U) << (msb & 0x1FU))) == 0U)) + { + } + + switch (PolyLength) + { + case CRC_POLYLENGTH_7B: + if (msb >= HAL_CRC_LENGTH_7B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_8B: + if (msb >= HAL_CRC_LENGTH_8B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_16B: + if (msb >= HAL_CRC_LENGTH_16B) + { + status = HAL_ERROR; + } + break; + + case CRC_POLYLENGTH_32B: + /* no polynomial definition vs. polynomial length issue possible */ + break; + default: + status = HAL_ERROR; + break; + } + if (status == HAL_OK) + { + /* set generating polynomial */ + WRITE_REG(hcrc->Instance->POL, Pol); + + /* set generating polynomial size */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength); + } + /* Return function status */ + return status; +} + +/** + * @brief Set the Reverse Input data mode. + * @param hcrc CRC handle + * @param InputReverseMode Input Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_INPUTDATA_INVERSION_NONE no change in bit order (default value) + * @arg @ref CRC_INPUTDATA_INVERSION_BYTE Byte-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD HalfWord-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_WORD Word-wise bit reversal + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set input data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode); + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the Reverse Output data mode. + * @param hcrc CRC handle + * @param OutputReverseMode Output Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion (default value) + * @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE bit-level inversion (e.g. for a 8-bit CRC: 0xB5 becomes 0xAD) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set output data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + + + + +/** + * @} + */ + + +/** + * @} + */ + + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cryp.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cryp.c new file mode 100644 index 0000000..49dc2e3 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cryp.c @@ -0,0 +1,5467 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cryp.c + * @author MCD Application Team + * @brief CRYP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cryptography (CRYP) peripheral: + * + Initialization, de-initialization, set config and get config functions + * + AES processing functions + * + DMA callback functions + * + CRYP IRQ handler management + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The CRYP HAL driver can be used in CRYP or TinyAES peripheral as follows: + + (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit(): + (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()or __HAL_RCC_AES_CLK_ENABLE for TinyAES peripheral + (##) In case of using interrupts (e.g. HAL_CRYP_Encrypt_IT()) + (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority() + (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ() + (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler() + (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_Encrypt_DMA()) + (+++) Enable the DMAx interface clock using __RCC_DMAx_CLK_ENABLE() + (+++) Configure and enable two DMA streams one for managing data transfer from + memory to peripheral (input stream) and another stream for managing data + transfer from peripheral to memory (output stream) + (+++) Associate the initialized DMA handle to the CRYP DMA handle + using __HAL_LINKDMA() + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the two DMA channels. The output channel should have higher + priority than the input channel HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + + (#)Initialize the CRYP according to the specified parameters : + (##) The data type: 1-bit, 8-bit, 16-bit or 32-bit. + (##) The key size: 128, 192 or 256. + (##) The AlgoMode DES/ TDES Algorithm ECB/CBC or AES Algorithm ECB/CBC/CTR/GCM or CCM. + (##) The initialization vector (counter). It is not used in ECB mode. + (##) The key buffer used for encryption/decryption. + (+++) In some specific configurations, the key is written by the application + code out of the HAL scope. In that case, user can still resort to the + HAL APIs as usual but must make sure that pKey pointer is set to NULL. + (##) The DataWidthUnit field. It specifies whether the data length (or the payload length for authentication + algorithms) is in words or bytes. + (##) The Header used only in AES GCM and CCM Algorithm for authentication. + (##) The HeaderSize providing the size of the header buffer in words or bytes, depending upon HeaderWidthUnit field. + (##) The HeaderWidthUnit field. It specifies whether the header length (for authentication algorithms) is in words or bytes. + (##) The B0 block is the first authentication block used only in AES CCM mode. + (##) The KeyIVConfigSkip used to process several messages in a row (please see more information below). + + (#)Three processing (encryption/decryption) functions are available: + (##) Polling mode: encryption and decryption APIs are blocking functions + i.e. they process the data and wait till the processing is finished, + e.g. HAL_CRYP_Encrypt & HAL_CRYP_Decrypt + (##) Interrupt mode: encryption and decryption APIs are not blocking functions + i.e. they process the data under interrupt, + e.g. HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT + (##) DMA mode: encryption and decryption APIs are not blocking functions + i.e. the data transfer is ensured by DMA, + e.g. HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA + + (#)When the processing function is called at first time after HAL_CRYP_Init() + the CRYP peripheral is configured and processes the buffer in input. + At second call, no need to Initialize the CRYP, user have to get current configuration via + HAL_CRYP_GetConfig() API, then only HAL_CRYP_SetConfig() is requested to set + new parametres, finally user can start encryption/decryption. + + (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral. + + (#)To process a single message with consecutive calls to HAL_CRYP_Encrypt() or HAL_CRYP_Decrypt() + without having to configure again the Key or the Initialization Vector between each API call, + the field KeyIVConfigSkip of the initialization structure must be set to CRYP_KEYIVCONFIG_ONCE. + Same is true for consecutive calls of HAL_CRYP_Encrypt_IT(), HAL_CRYP_Decrypt_IT(), HAL_CRYP_Encrypt_DMA() + or HAL_CRYP_Decrypt_DMA(). + + [..] + The cryptographic processor supports following standards: + (#) The data encryption standard (DES) and Triple-DES (TDES) supported only by CRYP1 peripheral: + (##)64-bit data block processing + (##) chaining modes supported : + (+++) Electronic Code Book(ECB) + (+++) Cipher Block Chaining (CBC) + (##) keys length supported :64-bit, 128-bit and 192-bit. + (#) The advanced encryption standard (AES) supported by CRYP1 & TinyAES peripheral: + (##)128-bit data block processing + (##) chaining modes supported : + (+++) Electronic Code Book(ECB) + (+++) Cipher Block Chaining (CBC) + (+++) Counter mode (CTR) + (+++) Galois/counter mode (GCM/GMAC) + (+++) Counter with Cipher Block Chaining-Message(CCM) + (##) keys length Supported : + (+++) for CRYP1 peripheral: 128-bit, 192-bit and 256-bit. + (+++) for TinyAES peripheral: 128-bit and 256-bit + + [..] + (@) Specific care must be taken to format the key and the Initialization Vector IV! + + [..] If the key is defined as a 128-bit long array key[127..0] = {b127 ... b0} where + b127 is the MSB and b0 the LSB, the key must be stored in MCU memory + (+) as a sequence of words where the MSB word comes first (occupies the + lowest memory address) + (++) address n+0 : 0b b127 .. b120 b119 .. b112 b111 .. b104 b103 .. b96 + (++) address n+4 : 0b b95 .. b88 b87 .. b80 b79 .. b72 b71 .. b64 + (++) address n+8 : 0b b63 .. b56 b55 .. b48 b47 .. b40 b39 .. b32 + (++) address n+C : 0b b31 .. b24 b23 .. b16 b15 .. b8 b7 .. b0 + [..] Hereafter, another illustration when considering a 128-bit long key made of 16 bytes {B15..B0}. + The 4 32-bit words that make the key must be stored as follows in MCU memory: + (+) address n+0 : 0x B15 B14 B13 B12 + (+) address n+4 : 0x B11 B10 B9 B8 + (+) address n+8 : 0x B7 B6 B5 B4 + (+) address n+C : 0x B3 B2 B1 B0 + [..] which leads to the expected setting + (+) AES_KEYR3 = 0x B15 B14 B13 B12 + (+) AES_KEYR2 = 0x B11 B10 B9 B8 + (+) AES_KEYR1 = 0x B7 B6 B5 B4 + (+) AES_KEYR0 = 0x B3 B2 B1 B0 + + [..] Same format must be applied for a 256-bit long key made of 32 bytes {B31..B0}. + The 8 32-bit words that make the key must be stored as follows in MCU memory: + (+) address n+00 : 0x B31 B30 B29 B28 + (+) address n+04 : 0x B27 B26 B25 B24 + (+) address n+08 : 0x B23 B22 B21 B20 + (+) address n+0C : 0x B19 B18 B17 B16 + (+) address n+10 : 0x B15 B14 B13 B12 + (+) address n+14 : 0x B11 B10 B9 B8 + (+) address n+18 : 0x B7 B6 B5 B4 + (+) address n+1C : 0x B3 B2 B1 B0 + [..] which leads to the expected setting + (+) AES_KEYR7 = 0x B31 B30 B29 B28 + (+) AES_KEYR6 = 0x B27 B26 B25 B24 + (+) AES_KEYR5 = 0x B23 B22 B21 B20 + (+) AES_KEYR4 = 0x B19 B18 B17 B16 + (+) AES_KEYR3 = 0x B15 B14 B13 B12 + (+) AES_KEYR2 = 0x B11 B10 B9 B8 + (+) AES_KEYR1 = 0x B7 B6 B5 B4 + (+) AES_KEYR0 = 0x B3 B2 B1 B0 + + [..] Initialization Vector IV (4 32-bit words) format must follow the same as + that of a 128-bit long key. + + [..] Note that key and IV registers are not sensitive to swap mode selection. + + [..] This section describes the AES Galois/counter mode (GCM) supported by both CRYP1 and TinyAES peripherals: + (#) Algorithm supported : + (##) Galois/counter mode (GCM) + (##) Galois message authentication code (GMAC) :is exactly the same as + GCM algorithm composed only by an header. + (#) Four phases are performed in GCM : + (##) Init phase: peripheral prepares the GCM hash subkey (H) and do the IV processing + (##) Header phase: peripheral processes the Additional Authenticated Data (AAD), with hash + computation only. + (##) Payload phase: peripheral processes the plaintext (P) with hash computation + keystream + encryption + data XORing. It works in a similar way for ciphertext (C). + (##) Final phase: peripheral generates the authenticated tag (T) using the last block of data. + (#) structure of message construction in GCM is defined as below : + (##) 16 bytes Initial Counter Block (ICB)composed of IV and counter + (##) The authenticated header A (also knows as Additional Authentication Data AAD) + this part of the message is only authenticated, not encrypted. + (##) The plaintext message P is both authenticated and encrypted as ciphertext. + GCM standard specifies that ciphertext has same bit length as the plaintext. + (##) The last block is composed of the length of A (on 64 bits) and the length of ciphertext + (on 64 bits) + + [..] A more detailed description of the GCM message structure is available below. + + [..] This section describe The AES Counter with Cipher Block Chaining-Message + Authentication Code (CCM) supported by both CRYP1 and TinyAES peripheral: + (#) Specific parameters for CCM : + + (##) B0 block : follows NIST Special Publication 800-38C, + (##) B1 block (header) + (##) CTRx block : control blocks + + [..] A detailed description of the CCM message structure is available below. + + (#) Four phases are performed in CCM for CRYP1 peripheral: + (##) Init phase: peripheral prepares the GCM hash subkey (H) and do the IV processing + (##) Header phase: peripheral processes the Additional Authenticated Data (AAD), with hash + computation only. + (##) Payload phase: peripheral processes the plaintext (P) with hash computation + keystream + encryption + data XORing. It works in a similar way for ciphertext (C). + (##) Final phase: peripheral generates the authenticated tag (T) using the last block of data. + (#) CCM in TinyAES peripheral: + (##) To perform message payload encryption or decryption AES is configured in CTR mode. + (##) For authentication two phases are performed : + - Header phase: peripheral processes the Additional Authenticated Data (AAD) first, then the cleartext message + only cleartext payload (not the ciphertext payload) is used and no outpout. + (##) Final phase: peripheral generates the authenticated tag (T) using the last block of data. + + *** Callback registration *** + ============================= + + [..] + The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_CRYP_RegisterCallback() or HAL_CRYP_RegisterXXXCallback() + to register an interrupt callback. + + [..] + Function HAL_CRYP_RegisterCallback() allows to register following callbacks: + (+) InCpltCallback : Input FIFO transfer completed callback. + (+) OutCpltCallback : Output FIFO transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CRYP MspInit. + (+) MspDeInitCallback : CRYP MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_CRYP_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_CRYP_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) InCpltCallback : Input FIFO transfer completed callback. + (+) OutCpltCallback : Output FIFO transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CRYP MspInit. + (+) MspDeInitCallback : CRYP MspDeInit. + + [..] + By default, after the HAL_CRYP_Init() and when the state is HAL_CRYP_STATE_RESET + all callbacks are set to the corresponding weak functions : + examples HAL_CRYP_InCpltCallback() , HAL_CRYP_OutCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_CRYP_Init()/ HAL_CRYP_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_CRYP_Init() / HAL_CRYP_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_CRYP_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_CRYP_STATE_READY or HAL_CRYP_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_CRYP_RegisterCallback() before calling HAL_CRYP_DeInit() + or HAL_CRYP_Init() function. + + [..] + When The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + + *** Suspend/Resume feature *** + ============================== + + [..] + The compilation define USE_HAL_CRYP_SUSPEND_RESUME when set to 1 + allows the user to resort to the suspend/resume feature. + A low priority block processing can be suspended to process a high priority block + instead. When the high priority block processing is over, the low priority block + processing can be resumed, restarting from the point where it was suspended. This + feature is applicable only in non-blocking interrupt mode. + + [..] User must resort to HAL_CRYP_Suspend() to suspend the low priority block + processing. This API manages the hardware block processing suspension and saves all the + internal data that will be needed to restart later on. Upon HAL_CRYP_Suspend() completion, + the user can launch the processing of any other block (high priority block processing). + + [..] When the high priority block processing is over, user must invoke HAL_CRYP_Resume() + to resume the low priority block processing. Ciphering (or deciphering) restarts from + the suspension point and ends as usual. + + [..] HAL_CRYP_Suspend() reports an error when the suspension request is sent too late + (i.e when the low priority block processing is about to end). There is no use to + suspend the tag generation processing for authentication algorithms. + + [..] + (@) If the key is written out of HAL scope (case pKey pointer set to NULL by the user), + the block processing suspension/resumption mechanism is NOT applicable. + + [..] + (@) If the Key and Initialization Vector are configured only once and configuration is + skipped for consecutive processings (case KeyIVConfigSkip set to CRYP_KEYIVCONFIG_ONCE), + the block processing suspension/resumption mechanism is NOT applicable. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRYP + * @{ + */ + +#if defined(AES) +#ifdef HAL_CRYP_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Defines + * @{ + */ +#define CRYP_TIMEOUT_KEYPREPARATION 82U /* The latency of key preparation operation is 82 clock cycles.*/ +#define CRYP_TIMEOUT_GCMCCMINITPHASE 299U /* The latency of GCM/CCM init phase to prepare hash subkey is 299 clock cycles.*/ +#define CRYP_TIMEOUT_GCMCCMHEADERPHASE 290U /* The latency of GCM/CCM header phase is 290 clock cycles.*/ + +#define CRYP_PHASE_READY 0x00000001U /*!< CRYP peripheral is ready for initialization. */ +#define CRYP_PHASE_PROCESS 0x00000002U /*!< CRYP peripheral is in processing phase */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +#define CRYP_PHASE_HEADER_SUSPENDED 0x00000004U /*!< GCM/GMAC/CCM header phase is suspended */ +#define CRYP_PHASE_PAYLOAD_SUSPENDED 0x00000005U /*!< GCM/CCM payload phase is suspended */ +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +#define CRYP_PHASE_HEADER_DMA_FEED 0x00000006U /*!< GCM/GMAC/CCM header is fed to the peripheral in DMA mode */ + +#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode(Mode 1) */ +#define CRYP_OPERATINGMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode only used when performing ECB and CBC decryptions (Mode 2) */ +#define CRYP_OPERATINGMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption (Mode 3) */ +#define CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption only used when performing ECB and CBC decryptions (Mode 4) */ +#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ +#define CRYP_PHASE_HEADER AES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ +#define CRYP_PHASE_PAYLOAD AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ +#define CRYP_PHASE_FINAL AES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ + +/* CTR1 information to use in CCM algorithm */ +#define CRYP_CCM_CTR1_0 0x07FFFFFFU +#define CRYP_CCM_CTR1_1 0xFFFFFF00U +#define CRYP_CCM_CTR1_2 0x00000001U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Macros + * @{ + */ + +#define CRYP_SET_PHASE(__HANDLE__, __PHASE__) MODIFY_REG((__HANDLE__)->Instance->CR, AES_CR_GCMPH, (uint32_t)(__PHASE__)) + +/** + * @} + */ + +/* Private struct -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup CRYP_Private_Functions + * @{ + */ + +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr); +static HAL_StatusTypeDef CRYP_SetHeaderDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size); +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAError(DMA_HandleTypeDef *hdma); +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize); +static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp); +static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetPayloadPhase_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp); +static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcrypt, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static void CRYP_ClearCCFlagWhenHigh(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +static void CRYP_Read_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Output); +static void CRYP_Write_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input); +static void CRYP_Read_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Output); +static void CRYP_Write_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input); +static void CRYP_Read_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Output, uint32_t KeySize); +static void CRYP_Write_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input, uint32_t KeySize); +static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp); +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup CRYP_Exported_Functions + * @{ + */ + +/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ======================================================================================== + ##### Initialization, de-initialization and Set and Get configuration functions ##### + ======================================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRYP + (+) DeInitialize the CRYP + (+) Initialize the CRYP MSP + (+) DeInitialize the CRYP MSP + (+) configure CRYP (HAL_CRYP_SetConfig) with the specified parameters in the CRYP_ConfigTypeDef + Parameters which are configured in This section are : + (++) Key size + (++) Data Type : 32,16, 8 or 1bit + (++) AlgoMode : + (+++) for CRYP1 peripheral : + ECB and CBC in DES/TDES Standard + ECB,CBC,CTR,GCM/GMAC and CCM in AES Standard. + (+++) for TinyAES2 peripheral, only ECB,CBC,CTR,GCM/GMAC and CCM in AES Standard are supported. + (+) Get CRYP configuration (HAL_CRYP_GetConfig) from the specified parameters in the CRYP_HandleTypeDef + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CRYP according to the specified + * parameters in the CRYP_ConfigTypeDef and creates the associated handle. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize)); + assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType)); + assert_param(IS_CRYP_ALGORITHM(hcryp->Init.Algorithm)); + assert_param(IS_CRYP_INIT(hcryp->Init.KeyIVConfigSkip)); + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + if (hcryp->State == HAL_CRYP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcryp->Lock = HAL_UNLOCKED; + + hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy weak InCpltCallback */ + hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy weak OutCpltCallback */ + hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hcryp->MspInitCallback == NULL) + { + hcryp->MspInitCallback = HAL_CRYP_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hcryp->MspInitCallback(hcryp); + } +#else + if (hcryp->State == HAL_CRYP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcryp->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_CRYP_MspInit(hcryp); + } +#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ + + /* Set the key size (This bit field is do not care in the DES or TDES modes), data type and Algorithm */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); + + /* Reset Error Code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; + + /* Reset peripheral Key and IV configuration flag */ + hcryp->KeyIVConfig = 0U; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief De-Initializes the CRYP peripheral. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status +*/ +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Reset CrypInCount and CrypOutCount */ + hcryp->CrypInCount = 0; + hcryp->CrypOutCount = 0; + hcryp->CrypHeaderCount = 0; + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + + if (hcryp->MspDeInitCallback == NULL) + { + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; /* Legacy weak MspDeInit */ + } + /* DeInit the low level hardware */ + hcryp->MspDeInitCallback(hcryp); + +#else + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_CRYP_MspDeInit(hcryp); + +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the CRYP according to the specified + * parameters in the CRYP_ConfigTypeDef + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param pConf pointer to a CRYP_ConfigTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) +{ + /* Check the CRYP handle allocation */ + if ((hcryp == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_CRYP_KEYSIZE(pConf->KeySize)); + assert_param(IS_CRYP_DATATYPE(pConf->DataType)); + assert_param(IS_CRYP_ALGORITHM(pConf->Algorithm)); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Set CRYP parameters */ + hcryp->Init.DataType = pConf->DataType; + hcryp->Init.pKey = pConf->pKey; + hcryp->Init.Algorithm = pConf->Algorithm; + hcryp->Init.KeySize = pConf->KeySize; + hcryp->Init.pInitVect = pConf->pInitVect; + hcryp->Init.Header = pConf->Header; + hcryp->Init.HeaderSize = pConf->HeaderSize; + hcryp->Init.B0 = pConf->B0; + hcryp->Init.DataWidthUnit = pConf->DataWidthUnit; + + /* Set the key size (This bit field is do not care in the DES or TDES modes), data type and operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); + + /*clear error flags*/ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_ERR_CLEAR); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Reset Error Code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Get CRYP Configuration parameters in associated handle. + * @param pConf pointer to a CRYP_ConfigTypeDef structure + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) +{ + /* Check the CRYP handle allocation */ + if ((hcryp == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Get CRYP parameters */ + pConf->DataType = hcryp->Init.DataType; + pConf->pKey = hcryp->Init.pKey; + pConf->Algorithm = hcryp->Init.Algorithm; + pConf->KeySize = hcryp->Init.KeySize ; + pConf->pInitVect = hcryp->Init.pInitVect; + pConf->Header = hcryp->Init.Header ; + pConf->HeaderSize = hcryp->Init.HeaderSize; + pConf->B0 = hcryp->Init.B0; + pConf->DataWidthUnit = hcryp->Init.DataWidthUnit; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } +} +/** + * @brief Initializes the CRYP MSP. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes CRYP MSP. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User CRYP Callback + * To be used instead of the weak predefined callback + * @param hcryp cryp handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_ERROR_CB_ID Error callback ID + * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, pCRYP_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hcryp); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + switch (CallbackID) + { + case HAL_CRYP_INPUT_COMPLETE_CB_ID : + hcryp->InCpltCallback = pCallback; + break; + + case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : + hcryp->OutCpltCallback = pCallback; + break; + + case HAL_CRYP_ERROR_CB_ID : + hcryp->ErrorCallback = pCallback; + break; + + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = pCallback; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcryp->State == HAL_CRYP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = pCallback; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return status; +} + +/** + * @brief Unregister an CRYP Callback + * CRYP callback is redirected to the weak predefined callback + * @param hcryp cryp handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_ERROR_CB_ID Error callback ID + * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hcryp); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + switch (CallbackID) + { + case HAL_CRYP_INPUT_COMPLETE_CB_ID : + hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy weak InCpltCallback */ + break; + + case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : + hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy weak OutCpltCallback */ + break; + + case HAL_CRYP_ERROR_CB_ID : + hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = HAL_CRYP_MspInit; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcryp->State == HAL_CRYP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = HAL_CRYP_MspInit; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK;; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return status; +} +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief Request CRYP processing suspension when in interruption mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @note Set the handle field SuspendRequest to the appropriate value so that + * the on-going CRYP processing is suspended as soon as the required + * conditions are met. + * @note HAL_CRYP_ProcessSuspend() can only be invoked when the processing is done + * in non-blocking interrupt mode. + * @note It is advised not to suspend the CRYP processing when the DMA controller + * is managing the data transfer. + * @retval None + */ +void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp) +{ + /* Set Handle SuspendRequest field */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND; +} + + + +/** + * @brief CRYP processing suspension and peripheral internal parameters storage. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @note peripheral internal parameters are stored to be readily available when + * suspended processing is resumed later on. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp) +{ + HAL_CRYP_STATETypeDef state; + + /* Request suspension */ + HAL_CRYP_ProcessSuspend(hcryp); + + do + { + state = HAL_CRYP_GetState(hcryp); + } while ((state != HAL_CRYP_STATE_SUSPENDED) && (state != HAL_CRYP_STATE_READY)); + + if (HAL_CRYP_GetState(hcryp) == HAL_CRYP_STATE_READY) + { + /* Processing was already over or was about to end. No suspension done */ + return HAL_ERROR; + } + else + { + /* Suspend Processing */ + + /* If authentication algorithms on-going, carry out first saving steps + before disable the peripheral */ + if ((hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + /* Save Suspension registers */ + CRYP_Read_SuspendRegisters(hcryp, hcryp->SUSPxR_saved); + /* Save Key */ + CRYP_Read_KeyRegisters(hcryp, hcryp->Key_saved, hcryp->Init.KeySize); + /* Save IV */ + CRYP_Read_IVRegisters(hcryp, hcryp->IV_saved); + } + /* Disable AES */ + __HAL_CRYP_DISABLE(hcryp); + + /* Save low-priority block CRYP handle parameters */ + hcryp->Init_saved = hcryp->Init; + hcryp->pCrypInBuffPtr_saved = hcryp->pCrypInBuffPtr; + hcryp->pCrypOutBuffPtr_saved = hcryp->pCrypOutBuffPtr; + hcryp->CrypInCount_saved = hcryp->CrypInCount; + hcryp->CrypOutCount_saved = hcryp->CrypOutCount; + hcryp->Phase_saved = hcryp->Phase; + hcryp->State_saved = hcryp->State; + hcryp->Size_saved = ( (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) ? (hcryp->Size /4U) : hcryp->Size); + hcryp->SizesSum_saved = hcryp->SizesSum; + hcryp->AutoKeyDerivation_saved = hcryp->AutoKeyDerivation; + hcryp->CrypHeaderCount_saved = hcryp->CrypHeaderCount; + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + + if ((hcryp->Init.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CTR)) + { + /* Save Initialisation Vector registers */ + CRYP_Read_IVRegisters(hcryp, hcryp->IV_saved); + } + + /* Save Control register */ + hcryp->CR_saved = hcryp->Instance->CR; + + } + return HAL_OK; +} + + +/** + * @brief CRYP processing resumption. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @note Processing restarts at the exact point where it was suspended, based + * on the parameters saved at suspension time. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + + if (hcryp->State_saved != HAL_CRYP_STATE_SUSPENDED) + { + /* CRYP was not suspended */ + return HAL_ERROR; + } + else + { + + /* Restore low-priority block CRYP handle parameters */ + hcryp->Init = hcryp->Init_saved; + hcryp->State = hcryp->State_saved; + + /* Chaining algorithms case */ + if ((hcryp->Init_saved.Algorithm == CRYP_AES_ECB) || \ + (hcryp->Init_saved.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init_saved.Algorithm == CRYP_AES_CTR)) + { + /* Restore low-priority block CRYP handle parameters */ + hcryp->AutoKeyDerivation = hcryp->AutoKeyDerivation_saved; + + if ((hcryp->Init.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CTR)) + { + hcryp->Init.pInitVect = hcryp->IV_saved; + } + __HAL_CRYP_DISABLE(hcryp); + (void) HAL_CRYP_Init(hcryp); + } + else /* Authentication algorithms case */ + { + /* Restore low-priority block CRYP handle parameters */ + hcryp->Phase = hcryp->Phase_saved; + hcryp->CrypHeaderCount = hcryp->CrypHeaderCount_saved; + hcryp->SizesSum = hcryp->SizesSum_saved; + + /* Disable AES and write-back SUSPxR registers */; + __HAL_CRYP_DISABLE(hcryp); + /* Restore AES Suspend Registers */ + CRYP_Write_SuspendRegisters(hcryp, hcryp->SUSPxR_saved); + /* Restore Control, Key and IV Registers, then enable AES */ + hcryp->Instance->CR = hcryp->CR_saved; + CRYP_Write_KeyRegisters(hcryp, hcryp->Key_saved, hcryp->Init.KeySize); + CRYP_Write_IVRegisters(hcryp, hcryp->IV_saved); + + /* At the same time, set handle state back to READY to be able to resume the AES calculations + without the processing APIs returning HAL_BUSY when called. */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + + /* Resume low-priority block processing under IT */ + hcryp->ResumingFlag = 1U; + if (READ_BIT(hcryp->CR_saved, AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + if (HAL_CRYP_Encrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + if (HAL_CRYP_Decrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} +#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */ + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group2 Encryption Decryption functions + * @brief Encryption Decryption functions. + * +@verbatim + ============================================================================== + ##### Encrypt Decrypt functions ##### + ============================================================================== + [..] This section provides API allowing to Encrypt/Decrypt Data following + Standard DES/TDES or AES, and Algorithm configured by the user: + (+) Standard DES/TDES only supported by CRYP1 peripheral, below list of Algorithm supported : + - Electronic Code Book(ECB) + - Cipher Block Chaining (CBC) + (+) Standard AES supported by CRYP1 peripheral & TinyAES, list of Algorithm supported: + - Electronic Code Book(ECB) + - Cipher Block Chaining (CBC) + - Counter mode (CTR) + - Cipher Block Chaining (CBC) + - Counter mode (CTR) + - Galois/counter mode (GCM) + - Counter with Cipher Block Chaining-Message(CCM) + [..] Three processing functions are available: + (+) Polling mode : HAL_CRYP_Encrypt & HAL_CRYP_Decrypt + (+) Interrupt mode : HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT + (+) DMA mode : HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA + +@endverbatim + * @{ + */ + +/* GCM message structure additional details + + ICB + +-------------------------------------------------------+ + | Initialization vector (IV) | Counter | + |----------------|----------------|-----------|---------| + 127 95 63 31 0 + + + Bit Number Register Contents + ---------- --------------- ----------- + 127 ...96 CRYP_IV1R[31:0] ICB[127:96] + 95 ...64 CRYP_IV1L[31:0] B0[95:64] + 63 ... 32 CRYP_IV0R[31:0] ICB[63:32] + 31 ... 0 CRYP_IV0L[31:0] ICB[31:0], where 32-bit counter= 0x2 + + + + GCM last block definition + +-------------------------------------------------------------------+ + | Bit[0] | Bit[32] | Bit[64] | Bit[96] | + |-----------|--------------------|-----------|----------------------| + | 0x0 | Header length[31:0]| 0x0 | Payload length[31:0] | + |-----------|--------------------|-----------|----------------------| + +*/ + +/* CCM message blocks description + + (##) B0 block : According to NIST Special Publication 800-38C, + The first block B0 is formatted as follows, where l(m) is encoded in + most-significant-byte first order: + + Octet Number Contents + ------------ --------- + 0 Flags + 1 ... 15-q Nonce N + 16-q ... 15 Q + + the Flags field is formatted as follows: + + Bit Number Contents + ---------- ---------------------- + 7 Reserved (always zero) + 6 Adata + 5 ... 3 (t-2)/2 + 2 ... 0 [q-1]3 + + - Q: a bit string representation of the octet length of P (plaintext) + - q The octet length of the binary representation of the octet length of the payload + - A nonce (N), n The octet length of the where n+q=15. + - Flags: most significant octet containing four flags for control information, + - t The octet length of the MAC. + (##) B1 block (header) : associated data length(a) concatenated with Associated Data (A) + the associated data length expressed in bytes (a) defined as below: + - If 0 < a < 216-28, then it is encoded as [a]16, i.e. two octets + - If 216-28 < a < 232, then it is encoded as 0xff || 0xfe || [a]32, i.e. six octets + - If 232 < a < 264, then it is encoded as 0xff || 0xff || [a]64, i.e. ten octets + (##) CTRx block : control blocks + - Generation of CTR1 from first block B0 information : + equal to B0 with first 5 bits zeroed and most significant bits storing octet + length of P also zeroed, then incremented by one + + Bit Number Register Contents + ---------- --------------- ----------- + 127 ...96 CRYP_IV1R[31:0] B0[127:96], where Q length bits are set to 0, except for + bit 0 that is set to 1 + 95 ...64 CRYP_IV1L[31:0] B0[95:64] + 63 ... 32 CRYP_IV0R[31:0] B0[63:32] + 31 ... 0 CRYP_IV0L[31:0] B0[31:0], where flag bits set to 0 + + - Generation of CTR0: same as CTR1 with bit[0] set to zero. + +*/ + +/** + * @brief Encryption mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (plaintext) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(ciphertext) + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout) +{ + uint32_t algo; + HAL_StatusTypeDef status; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set the operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES encryption */ + status = CRYP_AES_Encrypt(hcryp, Timeout); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process(hcryp, Timeout) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process(hcryp, Timeout); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Decryption mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (ciphertext ) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(plaintext) + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set Decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt(hcryp, Timeout); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process(hcryp, Timeout) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process(hcryp, Timeout); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Encryption in interrupt mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (plaintext) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(ciphertext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if (hcryp->ResumingFlag == 1U) + { + hcryp->ResumingFlag = 0U; + if (hcryp->Phase != CRYP_PHASE_HEADER_SUSPENDED) + { + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; + } + else + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set encryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES encryption */ + status = CRYP_AES_Encrypt_IT(hcryp); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process_IT(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process_IT(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Decryption in interrupt mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (ciphertext ) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(plaintext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if (hcryp->ResumingFlag == 1U) + { + hcryp->ResumingFlag = 0U; + if (hcryp->Phase != CRYP_PHASE_HEADER_SUSPENDED) + { + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; + } + else + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt_IT(hcryp); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process_IT(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process_IT(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Encryption in DMA mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (plaintext) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(ciphertext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set encryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the Initialization Vector*/ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Start DMA process transfer for AES */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr)); + status = HAL_OK; + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process_DMA(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process_DMA(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Decryption in DMA mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (ciphertext ) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(plaintext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt_DMA(hcryp); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process_DMA(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process_DMA(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group3 CRYP IRQ handler management + * @brief CRYP IRQ handler. + * +@verbatim + ============================================================================== + ##### CRYP IRQ handler management ##### + ============================================================================== +[..] This section provides CRYP IRQ handler and callback functions. + (+) HAL_CRYP_IRQHandler CRYP interrupt request + (+) HAL_CRYP_InCpltCallback input data transfer complete callback + (+) HAL_CRYP_OutCpltCallback output data transfer complete callback + (+) HAL_CRYP_ErrorCallback CRYP error callback + (+) HAL_CRYP_GetState return the CRYP state + (+) HAL_CRYP_GetError return the CRYP error code +@endverbatim + * @{ + */ + +/** + * @brief This function handles cryptographic interrupt request. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp) +{ + + /* Check if error occurred */ + if (__HAL_CRYP_GET_IT_SOURCE(hcryp,CRYP_IT_ERRIE) != RESET) + { + /* If write Error occurred */ + if (__HAL_CRYP_GET_FLAG(hcryp,CRYP_IT_WRERR) != RESET) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_WRITE; + } + /* If read Error occurred */ + if (__HAL_CRYP_GET_FLAG(hcryp,CRYP_IT_RDERR) != RESET) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_READ; + } + } + + if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_IT_CCF) != RESET) + { + if(__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_CCFIE) != RESET) + { + /* Clear computation complete flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + if ((hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) || (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + + /* if header phase */ + if ((hcryp->Instance->CR & CRYP_PHASE_HEADER) == CRYP_PHASE_HEADER) + { + CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); + } + else /* if payload phase */ + { + CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); + } + } + else /* AES Algorithm ECB,CBC or CTR*/ + { + CRYP_AES_IT(hcryp); + } + } +} +} + +/** + * @brief Return the CRYP error code. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for the CRYP peripheral + * @retval CRYP error code + */ +uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp) +{ + return hcryp->ErrorCode; +} + +/** + * @brief Returns the CRYP state. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval HAL state + */ +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp) +{ + return hcryp->State; +} + +/** + * @brief Input FIFO transfer completed callback. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_InCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output FIFO transfer completed callback. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_OutCpltCallback could be implemented in the user file + */ +} + +/** + * @brief CRYP error callback. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_ErrorCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Functions + * @{ + */ + +/** + * @brief Encryption in ECB/CBC & CTR Algorithm with AES Standard + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param Timeout specify Timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) + { + /* Write plain Ddta and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Encryption in ECB/CBC & CTR mode with AES Standard using interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Size != 0U) + { + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + else + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param Timeout Specify Timeout value + * @retval HAL status +*/ +static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) /*ECB or CBC*/ + { + if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 Key preparation*/ + { + /* Set key preparation for decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); + + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & error code*/ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + } + else /*Mode 4 : decryption & Key preparation*/ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set decryption & Key preparation operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); + } + } + else /*Algorithm CTR */ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Set IV */ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; +} +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard using interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) + { + if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 Key preparation*/ + { + /* Set key preparation for decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); + + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + count = CRYP_TIMEOUT_KEYPREPARATION; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + } + else /*Mode 4 : decryption & key preparation*/ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set decryption & key preparation operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); + } + } + else /*Algorithm CTR */ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Set IV */ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + if (hcryp->Size != 0U) + { + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + else + { + /* Process locked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + /* Return function status */ + return HAL_OK; +} +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard using DMA mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) + { + if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 key preparation*/ + { + /* Set key preparation for decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); + + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + count = CRYP_TIMEOUT_KEYPREPARATION; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + } + else /*Mode 4 : decryption & key preparation*/ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set decryption & Key preparation operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); + } + } + else /*Algorithm CTR */ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Size != 0U) + { + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief DMA CRYP input data process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + uint32_t loopcounter; + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ + + /* Stop the DMA transfers to the IN FIFO by clearing to "0" the DMAINEN */ + CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); + + if (hcryp->Phase == CRYP_PHASE_HEADER_DMA_FEED) + { + /* DMA is disabled, CCF is meaningful. Wait for computation completion before moving forward */ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + if ((headersize_in_bytes % 16U) != 0U) + { + /* Write last words that couldn't be fed by DMA */ + hcryp->CrypHeaderCount = (uint16_t)((headersize_in_bytes / 16U) * 4U); + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + + /* Wait for computation completion before moving forward */ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + } /* if ((headersize_in_bytes % 16U) != 0U) */ + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Initiate payload DMA IN and processed data DMA OUT transfers */ + (void)CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp); + } + + /* Call input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA CRYP output data process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma) +{ + uint32_t count; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t mode; + + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Stop the DMA transfers to the OUT FIFO by clearing to "0" the DMAOUTEN */ + CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAOUTEN); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Last block transfer in case of GCM or CCM with Size not %16*/ + if (((hcryp->Size) % 16U) != 0U) + { + /* set CrypInCount and CrypOutCount to exact number of word already computed via DMA */ + hcryp->CrypInCount = (hcryp->Size / 16U) * 4U; + hcryp->CrypOutCount = hcryp->CrypInCount; + + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (count = 0U; count < lastwordsize; count++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (count < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + count++; + } + + /*Wait on CCF flag*/ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + + /*Read the output block from the output FIFO */ + for (count = 0U; count < 4U; count++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ + temp[count] = hcryp->Instance->DOUTR; + } + + count = 0U; + while((hcryp->CrypOutCount < ((hcryp->Size + 3U)/4U)) && (count<4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[count]; + hcryp->CrypOutCount++; + count++; + } + } + + if (((hcryp->Init.Algorithm & CRYP_AES_GCM_GMAC) != CRYP_AES_GCM_GMAC) && ((hcryp->Init.Algorithm & CRYP_AES_CCM) != CRYP_AES_CCM)) + { + /* Disable CRYP (not allowed in GCM)*/ + __HAL_CRYP_DISABLE(hcryp); + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA CRYP communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void CRYP_DMAError(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + +/** + * @brief Set the DMA configuration and start the DMA transfer + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param inputaddr address of the input buffer + * @param Size size of the input and output buffers in words, must be a multiple of 4 + * @param outputaddr address of the output buffer + * @retval None + */ +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr) +{ + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; + + /* Set the DMA input error callback */ + hcryp->hdmain->XferErrorCallback = CRYP_DMAError; + + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt; + + /* Set the DMA output error callback */ + hcryp->hdmaout->XferErrorCallback = CRYP_DMAError; + + if ((hcryp->Init.Algorithm & CRYP_AES_GCM_GMAC) != CRYP_AES_GCM_GMAC) + { + /* Enable CRYP (not allowed in GCM & CCM)*/ + __HAL_CRYP_ENABLE(hcryp); + } + + /* Enable the DMA input stream */ + if (HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DINR, Size) != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /* Enable the DMA output stream */ + if (HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUTR, outputaddr, Size) != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /* Enable In and Out DMA requests */ + SET_BIT(hcryp->Instance->CR, (AES_CR_DMAINEN | AES_CR_DMAOUTEN)); +} + +/** + * @brief Set the DMA configuration and start the header DMA transfer + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param inputaddr address of the input buffer + * @param Size size of the input buffer in words, must be a multiple of 4 + * @retval None + */ +static HAL_StatusTypeDef CRYP_SetHeaderDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size) +{ + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; + + /* Set the DMA input error callback */ + hcryp->hdmain->XferErrorCallback = CRYP_DMAError; + + /* Mark that header is fed to the peripheral in DMA mode */ + hcryp->Phase = CRYP_PHASE_HEADER_DMA_FEED; + /* Enable the DMA input stream */ + if (HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DINR, Size) != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + /* Call error callback */ + } + + /* Enable IN DMA requests */ + SET_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); + + return HAL_OK; +} + +/** + * @brief Process Data: Write Input data in polling mode and used in AES functions. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout Specify Timeout value + * @retval None + */ +static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t i; + + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + /*Call registered error callback*/ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = hcryp->Instance->DOUTR; + } + i= 0U; + while((hcryp->CrypOutCount < ((hcryp->Size + 3U)/4U)) && (i<4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } +} + +/** + * @brief Handle CRYP block input/output data handling under interruption. + * @note The function is called under interruption only, once + * interruptions have been enabled by HAL_CRYP_Encrypt_IT or HAL_CRYP_Decrypt_IT. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval HAL status + */ +static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t i; + + if (hcryp->State == HAL_CRYP_STATE_BUSY) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = hcryp->Instance->DOUTR; + } + i= 0U; + while((hcryp->CrypOutCount < ((hcryp->Size + 3U)/4U)) && (i<4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + if (hcryp->CrypOutCount == (hcryp->Size / 4U)) + { + /* Disable Computation Complete flag and errors interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call Output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE|CRYP_IT_ERRIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_PAYLOAD_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if (hcryp->CrypInCount == (hcryp->Size / 4U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Writes Key in Key registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param KeySize Size of Key + * @note If pKey is NULL, the Key registers are not written. This configuration + * occurs when the key is written out of HAL scope. + * @retval None + */ +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize) +{ + if (hcryp->Init.pKey != NULL) + { + switch (KeySize) + { + case CRYP_KEYSIZE_256B: + hcryp->Instance->KEYR7 = *(uint32_t *)(hcryp->Init.pKey); + hcryp->Instance->KEYR6 = *(uint32_t *)(hcryp->Init.pKey + 1U); + hcryp->Instance->KEYR5 = *(uint32_t *)(hcryp->Init.pKey + 2U); + hcryp->Instance->KEYR4 = *(uint32_t *)(hcryp->Init.pKey + 3U); + hcryp->Instance->KEYR3 = *(uint32_t *)(hcryp->Init.pKey + 4U); + hcryp->Instance->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 5U); + hcryp->Instance->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 6U); + hcryp->Instance->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 7U); + break; + case CRYP_KEYSIZE_128B: + hcryp->Instance->KEYR3 = *(uint32_t *)(hcryp->Init.pKey); + hcryp->Instance->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 1U); + hcryp->Instance->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 2U); + hcryp->Instance->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 3U); + + break; + default: + break; + } + } +} + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t wordsize = ((uint32_t)hcryp->Size / 4U) ; + uint32_t npblb; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t index; + uint32_t lastwordsize; + uint32_t incount; /* Temporary CrypInCount Value */ + uint32_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /****************************** Init phase **********************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /************************ Header phase *************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /*************************Payload phase ************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + } /* if (DoKeyIVConfig == 1U) */ + + if ((hcryp->Size % 16U) != 0U) + { + /* recalculate wordsize */ + wordsize = ((wordsize / 4U) * 4U) ; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Write input data and get output Data */ + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < wordsize) && (outcount < wordsize)) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + if ((hcryp->Size % 16U) != 0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + /* Set Npblb in case of AES GCM payload encryption to get right tag*/ + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + /* last block optionally pad the data with zeros*/ + for (index = 0U; index < lastwordsize; index ++) + { + /* Write the last Input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (index < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0U; + index++; + } + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ + temp[index] = hcryp->Instance->DOUTR; + } + for (index = 0U; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = temp[index]; + hcryp->CrypOutCount++; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t npblb; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ + + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED)) + { + CRYP_PhaseProcessingResume(hcryp); + return HAL_OK; + } +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + + /* Manage header size given in bytes to handle cases where + header size is not a multiple of 4 bytes */ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + /* Configure Key, IV and process message (header and payload) */ + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /******************************* Init phase *********************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /***************************** Header phase *********************************/ + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if (hcryp->Init.HeaderSize == 0U) /*header phase is skipped*/ + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if (hcryp->CrypInCount == (hcryp->Size / 4U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 16Bytes : first block is the last block*/ + { + /* Workaround not implemented for TinyAES2*/ + /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: + Workaround is implemented in polling mode, so if last block of + payload <128bit do not use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ + + + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize ; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + /* Enter header data */ + /* Cher first whether header length is small enough to enter the full header in one shot */ + else if (headersize_in_bytes <= 16U) + { + /* Write header data, padded with zeros if need be */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++ ; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + else + { + /* Write the first input header block in the Input FIFO, + the following header data will be fed after interrupt occurrence */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + + } /* end of if (DoKeyIVConfig == 1U) */ + else /* Key and IV have already been configured, + header has already been processed; + only process here message payload */ + { + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if (hcryp->CrypInCount == (hcryp->Size / 4U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 16Bytes : first block is the last block*/ + { + /* Workaround not implemented for TinyAES2*/ + /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: + Workaround is implemented in polling mode, so if last block of + payload <128bit do not use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ + + + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize ; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG using DMA + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t count; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /*************************** Init phase ************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /************************ Header phase *************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + + } + else + { + /* Initialization and header phases already done, only do payload phase */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief AES CCM encryption/decryption processing in polling mode + * for TinyAES peripheral, no encrypt/decrypt performed, only authentication preparation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t wordsize = ((uint32_t)hcryp->Size / 4U) ; + uint32_t loopcounter; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp[4] ; /* Temporary CrypOutBuff */ + uint32_t incount; /* Temporary CrypInCount Value */ + uint32_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /********************** Init phase ******************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector (IV) with B0 */ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.B0); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /************************ Header phase *************************************/ + /* Header block(B1) : associated data length expressed in bytes concatenated + with Associated Data (A)*/ + if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /*************************Payload phase ************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + } /* if (DoKeyIVConfig == 1U) */ + + if ((hcryp->Size % 16U) != 0U) + { + /* recalculate wordsize */ + wordsize = ((wordsize / 4U) * 4U) ; + } + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Write input data and get output data */ + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < wordsize) && (outcount < wordsize)) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) ||(Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + if ((hcryp->Size % 16U) != 0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_DECRYPT) + { + /* Set Npblb in case of AES CCM payload decryption to get right tag */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20); + + } + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter ++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0U; + loopcounter++; + } + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + for (loopcounter = 0U; loopcounter < 4U; loopcounter++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ + temp[loopcounter] = hcryp->Instance->DOUTR; + } + for (loopcounter = 0U; loopcounterpCrypOutBuffPtr + hcryp->CrypOutCount) = temp[loopcounter]; + hcryp->CrypOutCount++; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM encryption/decryption process in interrupt mode + * for TinyAES peripheral, no encrypt/decrypt performed, only authentication preparation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED)) + { + CRYP_PhaseProcessingResume(hcryp); + return HAL_OK; + } +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + /* Configure Key, IV and process message (header and payload) */ + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /********************** Init phase ******************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector (IV) with B0 */ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.B0); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /***************************** Header phase *********************************/ + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if (hcryp->Init.HeaderSize == 0U) /*header phase is skipped*/ + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + if (hcryp->Init.Algorithm == CRYP_AES_CCM) + { + /* Increment CrypHeaderCount to pass in CRYP_GCMCCM_SetPayloadPhase_IT */ + hcryp->CrypHeaderCount++; + } + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + else if ((hcryp->Init.HeaderSize) < 4U) /*HeaderSize < 4 */ + { + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < (hcryp->Init.HeaderSize % 4U); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + + } /* end of if (DoKeyIVConfig == 1U) */ + else /* Key and IV have already been configured, + header has already been processed; + only process here message payload */ + { + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM encryption/decryption process in DMA mode + * for TinyAES peripheral, no encrypt/decrypt performed, only authentication preparation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t count; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + + /********************** Init phase ******************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector (IV) with B0 */ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.B0); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + + /********************* Header phase *****************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + + } + else + { + /* Initialization and header phases already done, only do payload phase */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the payload phase in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval state + */ +static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t i; + + /***************************** Payload phase *******************************/ + + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = hcryp->Instance->DOUTR; + } + i= 0U; + while((hcryp->CrypOutCount < ((hcryp->Size + 3U)/4U)) && (i<4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + if ((outcount >= (hcryp->Size / 4U)) && ((incount * 4U) >= hcryp->Size)) + { + + /* When in CCM with Key and IV configuration skipped, don't disable interruptions */ + if (!((hcryp->Init.Algorithm == CRYP_AES_CCM) && (hcryp->KeyIVConfig == 1U))) + { + /* Disable computation complete flag and errors interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + else if (((hcryp->Size / 4U) - (hcryp->CrypInCount)) >= 4U) + { + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE|CRYP_IT_ERRIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_PAYLOAD_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if ((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) + { + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } + else /* Last block of payload < 128bit*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } +} + + +/** + * @brief Sets the payload phase in DMA mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval state + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetPayloadPhase_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint16_t wordsize = hcryp->Size / 4U ; + uint32_t index; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t count; + uint32_t reg; + + /************************ Payload phase ************************************/ + if (hcryp->Size == 0U) + { + /* Process unLocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state and phase */ + hcryp->State = HAL_CRYP_STATE_READY; + } + else if (hcryp->Size >= 16U) + { + /*DMA transfer must not include the last block in case of Size is not %16 */ + wordsize = wordsize - (wordsize % 4U); + + /*DMA transfer */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), wordsize, (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else /* length of input data is < 16 */ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + /* Set Npblb in case of AES GCM payload encryption or AES CCM payload decryption to get right tag*/ + reg = hcryp->Instance->CR & (AES_CR_CHMOD|AES_CR_MODE); + if ((reg == (CRYP_AES_GCM_GMAC|CRYP_OPERATINGMODE_ENCRYPT)) ||\ + (reg == (CRYP_AES_CCM|CRYP_OPERATINGMODE_DECRYPT))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (index = 0U; index < lastwordsize; index ++) + { + /* Write the last Input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (index < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0U; + index++; + } + /* Wait for CCF flag to be raised */ + count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ + temp[index] = hcryp->Instance->DOUTR; + } + for (index = 0U; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; + hcryp->CrypOutCount++; + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + + return HAL_OK; +} + +/** + * @brief Sets the header phase in polling mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @param Timeout Timeout value + * @retval state + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t loopcounter; + uint32_t size_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ + + /***************************** Header phase for GCM/GMAC or CCM *********************************/ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + size_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + size_in_bytes = hcryp->Init.HeaderSize; + } + + if ((size_in_bytes != 0U)) + { + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* If size_in_bytes is a multiple of blocks (a multiple of four 32-bits words ) */ + if ((size_in_bytes % 16U) == 0U) + { + /* No padding */ + for (loopcounter = 0U; (loopcounter < (size_in_bytes / 4U)); loopcounter += 4U) + { + /* Write the input block in the data input register */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } + } + else + { + /* Write header block in the IN FIFO without last block */ + for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 16U) * 4U)); loopcounter += 4U) + { + /* Write the input block in the data input register */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } + /* Write last complete words */ + for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 4U) % 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((size_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (size_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } + } + else + { + /*Workaround 1: only AES, before re-enabling the peripheral, datatype can be configured.*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the header phase when using DMA in process + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ + + /***************************** Header phase for GCM/GMAC or CCM *********************************/ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* If header size is at least equal to 16 bytes, feed the header through DMA. + If size_in_bytes is not a multiple of blocks (is not a multiple of four 32-bit words ), + last bytes feeding and padding will be done in CRYP_DMAInCplt() */ + if (headersize_in_bytes >= 16U) + { + /* Initiate header DMA transfer */ + if (CRYP_SetHeaderDMAConfig(hcryp, (uint32_t)(hcryp->Init.Header), (uint16_t)((headersize_in_bytes / 16U) * 4U)) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + if (headersize_in_bytes != 0U) + { + /* Header length is larger than 0 and strictly less than 16 bytes */ + /* Write last complete words */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + + if (CRYP_WaitOnCCFlag(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } /* if (headersize_in_bytes != 0U) */ + + /* Move to payload phase if header length is null or + if the header length was less than 16 and header written by software instead of DMA */ + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Initiate payload DMA IN and processed data DMA OUT transfers */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + } /* if (headersize_in_bytes >= 16U) */ + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the header phase in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + /***************************** Header phase *********************************/ + /* Test whether or not the header phase is over. + If the test below is true, move to payload phase */ + if (headersize_in_bytes <= ((uint32_t)(hcryp->CrypHeaderCount) * 4U)) + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + /* Select payload phase */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + if (hcryp->Init.Algorithm == CRYP_AES_CCM) + { + /* Increment CrypHeaderCount to pass in CRYP_GCMCCM_SetPayloadPhase_IT */ + hcryp->CrypHeaderCount++; + } + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + else if ((((headersize_in_bytes / 4U) - (hcryp->CrypHeaderCount)) >= 4U)) + { + /* Can enter full 4 header words */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the header */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE|CRYP_IT_ERRIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_HEADER_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + } + else /* Write last header block (4 words), padded with zeros if needed */ + { + + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + } +} + +/** + * @brief Handle CRYP hardware block Timeout when waiting for CCF flag to be raised. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout Timeout duration. + * @note This function can only be used in thread mode. + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief Wait for Computation Complete Flag (CCF) to raise then clear it. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout Timeout duration. + * @note This function can be used in thread or handler mode. + * @retval HAL status + */ +static void CRYP_ClearCCFlagWhenHigh(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t count = Timeout; + + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + hcryp->State = HAL_CRYP_STATE_READY; + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); +} + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief In case of message processing suspension, read the Initialization Vector. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Initialization Vector. + * @note This value has to be stored for reuse by writing the AES_IVRx registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Output) +{ + uint32_t outputaddr = (uint32_t)Output; + + *(uint32_t*)(outputaddr) = hcryp->Instance->IVR3; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->IVR2; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->IVR1; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->IVR0; +} + +/** + * @brief In case of message processing resumption, rewrite the Initialization + * Vector in the AES_IVRx registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved Initialization Vector to + * write back in the CRYP hardware block. + * @note AES must be disabled when reconfiguring the IV values. + * @retval None + */ +static void CRYP_Write_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input) +{ + uint32_t ivaddr = (uint32_t)Input; + + hcryp->Instance->IVR3 = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->IVR2 = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->IVR1 = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->IVR0 = *(uint32_t*)(ivaddr); +} + +/** + * @brief In case of message GCM/GMAC/CCM processing suspension, + * read the Suspend Registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Suspend Registers. + * @note These values have to be stored for reuse by writing back the AES_SUSPxR registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Output) +{ + uint32_t outputaddr = (uint32_t)Output; + __IO uint32_t count = 0U; + + /* In case of GCM payload phase encryption, check that suspension can be carried out */ + if (READ_BIT(hcryp->Instance->CR, (AES_CR_CHMOD|AES_CR_GCMPH|AES_CR_MODE)) == (CRYP_AES_GCM_GMAC|AES_CR_GCMPH_1|0x0U)) + { + + /* Wait for BUSY flag to be cleared */ + count = 0xFFF; + do + { + count-- ; + if(count == 0U) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + HAL_CRYP_ErrorCallback(hcryp); + return; + } + } + while(HAL_IS_BIT_SET(hcryp->Instance->SR, AES_SR_BUSY)); + + } + + + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP7R; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP6R; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP5R; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP4R; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP3R; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP2R; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP1R; + outputaddr+=4U; + *(uint32_t*)(outputaddr) = hcryp->Instance->SUSP0R; +} + +/** + * @brief In case of message GCM/GMAC/CCM processing resumption, rewrite the Suspend + * Registers in the AES_SUSPxR registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved suspend registers to + * write back in the CRYP hardware block. + * @note AES must be disabled when reconfiguring the suspend registers. + * @retval None + */ +static void CRYP_Write_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input) +{ + uint32_t ivaddr = (uint32_t)Input; + + hcryp->Instance->SUSP7R = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->SUSP6R = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->SUSP5R = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->SUSP4R = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->SUSP3R = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->SUSP2R = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->SUSP1R = *(uint32_t*)(ivaddr); + ivaddr+=4U; + hcryp->Instance->SUSP0R = *(uint32_t*)(ivaddr); +} + +/** + * @brief In case of message GCM/GMAC/CCM processing suspension, read the Key Registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Key Registers. + * @param KeySize Indicates the key size (128 or 256 bits). + * @note These values have to be stored for reuse by writing back the AES_KEYRx registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Output, uint32_t KeySize) +{ + uint32_t keyaddr = (uint32_t)Output; + + switch (KeySize) + { + case CRYP_KEYSIZE_256B: + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 1U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 2U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 3U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 4U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 5U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 6U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 7U); + break; + case CRYP_KEYSIZE_128B: + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 1U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 2U); + keyaddr+=4U; + *(uint32_t*)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 3U); + break; + default: + break; + } +} + +/** + * @brief In case of message GCM/GMAC (CCM/CMAC when applicable) processing resumption, rewrite the Key + * Registers in the AES_KEYRx registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved key registers to + * write back in the CRYP hardware block. + * @param KeySize Indicates the key size (128 or 256 bits) + * @note AES must be disabled when reconfiguring the Key registers. + * @retval None + */ +static void CRYP_Write_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input, uint32_t KeySize) +{ + uint32_t keyaddr = (uint32_t)Input; + + if (KeySize == CRYP_KEYSIZE_256B) + { + hcryp->Instance->KEYR7 = *(uint32_t*)(keyaddr); + keyaddr+=4U; + hcryp->Instance->KEYR6 = *(uint32_t*)(keyaddr); + keyaddr+=4U; + hcryp->Instance->KEYR5 = *(uint32_t*)(keyaddr); + keyaddr+=4U; + hcryp->Instance->KEYR4 = *(uint32_t*)(keyaddr); + keyaddr+=4U; + } + + hcryp->Instance->KEYR3 = *(uint32_t*)(keyaddr); + keyaddr+=4U; + hcryp->Instance->KEYR2 = *(uint32_t*)(keyaddr); + keyaddr+=4U; + hcryp->Instance->KEYR1 = *(uint32_t*)(keyaddr); + keyaddr+=4U; + hcryp->Instance->KEYR0 = *(uint32_t*)(keyaddr); +} + +/** + * @brief Authentication phase resumption in case of GCM/GMAC/CCM process in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint16_t lastwordsize; + uint16_t npblb; + uint32_t cr_temp; + + + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_ERR_CLEAR | CRYP_CCF_CLEAR); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Case of header phase resumption =================================================*/ + if (hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + if ((((hcryp->Init.HeaderSize) - (hcryp->CrypHeaderCount)) >= 4U)) + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount ); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount ); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount ); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount ); + hcryp->CrypHeaderCount++; + } + else /*HeaderSize < 4 or HeaderSize >4 & HeaderSize %4 != 0*/ + { + /* Last block optionally pad the data with zeros*/ + for(loopcounter = 0U; loopcounter < (hcryp->Init.HeaderSize %4U ); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t*)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + while(loopcounter <4U ) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + /* Case of payload phase resumption =================================================*/ + else + { + if (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED) + { + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + if (((hcryp->Size/4U) - (hcryp->CrypInCount)) >= 4U) + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + if((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) + { + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Last block of payload < 128bit*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = (((hcryp->Size/16U)+1U)*16U) - (hcryp->Size); + cr_temp = hcryp->Instance->CR; + if((((cr_temp & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + (((cr_temp& AES_CR_MODE) == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, ((uint32_t)npblb)<< 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) ==0U) + { + lastwordsize = (16U-npblb)/4U; + } + else + { + lastwordsize = ((16U-npblb)/4U) +1U; + } + + /* Last block optionally pad the data with zeros*/ + for(loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + } + while(loopcounter < 4U ) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + } +} +#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */ +/** + * @} + */ + + +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#endif /* AES */ +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cryp_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cryp_ex.c new file mode 100644 index 0000000..72b7da7 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cryp_ex.c @@ -0,0 +1,389 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cryp_ex.c + * @author MCD Application Team + * @brief CRYPEx HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the Cryptography (CRYP) peripheral. + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRYPEx + * @{ + */ + +#if defined(AES) + +#ifdef HAL_CRYP_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup CRYPEx_Private_Defines + * @{ + */ + +#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ +#define CRYP_PHASE_HEADER AES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ +#define CRYP_PHASE_PAYLOAD AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ +#define CRYP_PHASE_FINAL AES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ + +#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode */ +#define CRYP_OPERATINGMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode only used when performing ECB and CBC decryptions */ +#define CRYP_OPERATINGMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption */ +#define CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption only used when performing ECB and CBC decryptions */ + +#define CRYPEx_PHASE_PROCESS 0x02U /*!< CRYP peripheral is in processing phase */ +#define CRYPEx_PHASE_FINAL 0x03U /*!< CRYP peripheral is in final phase this is relevant only with CCM and GCM modes */ + +/* CTR0 information to use in CCM algorithm */ +#define CRYP_CCM_CTR0_0 0x07FFFFFFU +#define CRYP_CCM_CTR0_3 0xFFFFFF00U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions---------------------------------------------------------*/ +/** @addtogroup CRYPEx_Exported_Functions + * @{ + */ + +/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions + * @brief Extended processing functions. + * +@verbatim + ============================================================================== + ##### Extended AES processing functions ##### + ============================================================================== + [..] This section provides functions allowing to generate the authentication + TAG in Polling mode + (#)HAL_CRYPEx_AESGCM_GenerateAuthTAG + (#)HAL_CRYPEx_AESCCM_GenerateAuthTAG + they should be used after Encrypt/Decrypt operation. + +@endverbatim + * @{ + */ + +/** + * @brief generate the GCM authentication TAG. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param AuthTag Pointer to the authentication buffer + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout) +{ + uint32_t tickstart; + /* Assume first Init.HeaderSize is in words */ + uint64_t headerlength = (uint64_t)hcryp->Init.HeaderSize * 32U; /* Header length in bits */ + uint64_t inputlength = (uint64_t)hcryp->SizesSum * 8U; /* Input length in bits */ + uint32_t tagaddr = (uint32_t)AuthTag; + + /* Correct headerlength if Init.HeaderSize is actually in bytes */ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_BYTE) + { + headerlength /= 4U; + } + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if (hcryp->Phase == CRYPEx_PHASE_PROCESS) + { + /* Change the CRYP phase */ + hcryp->Phase = CRYPEx_PHASE_FINAL; + } + else /* Initialization phase has not been performed*/ + { + /* Disable the Peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Sequence error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + + /* Select final phase */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_FINAL); + + /* Set the encrypt operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /*TinyAES peripheral from V3.1.1 : data has to be inserted normally (no swapping)*/ + /* Write into the AES_DINR register the number of bits in header (64 bits) + followed by the number of bits in the payload */ + + hcryp->Instance->DINR = 0U; + hcryp->Instance->DINR = (uint32_t)(headerlength); + hcryp->Instance->DINR = 0U; + hcryp->Instance->DINR = (uint32_t)(inputlength); + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout)||(Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + /* Read the authentication TAG in the output FIFO */ + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Disable the peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM Authentication TAG generation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param AuthTag Pointer to the authentication buffer + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout) +{ + uint32_t tagaddr = (uint32_t)AuthTag; + uint32_t tickstart; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Disable interrupts in case they were kept enabled to proceed + a single message in several iterations */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if (hcryp->Phase == CRYPEx_PHASE_PROCESS) + { + /* Change the CRYP phase */ + hcryp->Phase = CRYPEx_PHASE_FINAL; + } + else /* Initialization phase has not been performed*/ + { + /* Disable the peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Sequence error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Select final phase */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_FINAL); + + /* Set encrypt operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) ||(Timeout == 0U)) + { + /* Disable the CRYP peripheral Clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + /* Read the authentication TAG in the output FIFO */ + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + } + else + { + /* Busy error code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup CRYPEx_Exported_Functions_Group2 Extended AES Key Derivations functions + * @brief Extended Key Derivations functions. + * +@verbatim + ============================================================================== + ##### Key Derivation functions ##### + ============================================================================== + [..] This section provides functions allowing to Enable or Disable the + the AutoKeyDerivation parameter in CRYP_HandleTypeDef structure + These function are allowed only in TinyAES peripheral. +@endverbatim + * @{ + */ + +/** + * @brief AES enable key derivation functions + * @param hcryp pointer to a CRYP_HandleTypeDef structure. + */ +void HAL_CRYPEx_EnableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp) +{ + if (hcryp->State == HAL_CRYP_STATE_READY) + { + hcryp->AutoKeyDerivation = ENABLE; + } + else + { + /* Busy error code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; + } +} +/** + * @brief AES disable key derivation functions + * @param hcryp pointer to a CRYP_HandleTypeDef structure. + */ +void HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp) +{ + if (hcryp->State == HAL_CRYP_STATE_READY) + { + hcryp->AutoKeyDerivation = DISABLE; + } + else + { + /* Busy error code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#endif /* AES */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c new file mode 100644 index 0000000..45fe033 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c @@ -0,0 +1,1509 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac.c + * @author MCD Application Team + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Digital to Analog Converter (DAC) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + * + @verbatim + ============================================================================== + ##### DAC Peripheral features ##### + ============================================================================== + [..] + *** DAC Channels *** + ==================== + [..] + STM32G0 devices integrate two 12-bit Digital Analog Converters + + The 2 converters (i.e. channel1 & channel2) + can be used independently or simultaneously (dual mode): + (#) DAC channel1 with DAC_OUT1 (PA4) as output or connected to on-chip + peripherals (ex. timers). + (#) DAC channel2 with DAC_OUT2 (PA5) as output or connected to on-chip + peripherals (ex. timers). + + *** DAC Triggers *** + ==================== + [..] + Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE + and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register. + [..] + Digital to Analog conversion can be triggered by: + (#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9. + The used pin (GPIOx_PIN_9) must be configured in input mode. + + (#) Timers TRGO: TIM2, TIM3, TIM4, TIM5, TIM6 and TIM7 + (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T3_TRGO...) + + (#) Software using DAC_TRIGGER_SOFTWARE + + *** DAC Buffer mode feature *** + =============================== + [..] + Each DAC channel integrates an output buffer that can be used to + reduce the output impedance, and to drive external loads directly + without having to add an external operational amplifier. + To enable, the output buffer use + sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; + [..] + (@) Refer to the device datasheet for more details about output + impedance value with and without output buffer. + + *** DAC connect feature *** + =============================== + [..] + Each DAC channel can be connected internally. + To connect, use + sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_ENABLE; + + *** GPIO configurations guidelines *** + ===================== + [..] + When a DAC channel is used (ex channel1 on PA4) and the other is not + (ex channel2 on PA5 is configured in Analog and disabled). + Channel1 may disturb channel2 as coupling effect. + Note that there is no coupling on channel2 as soon as channel2 is turned on. + Coupling on adjacent channel could be avoided as follows: + when unused PA5 is configured as INPUT PULL-UP or DOWN. + PA5 is configured in ANALOG just before it is turned on. + + *** DAC Sample and Hold feature *** + ======================== + [..] + For each converter, 2 modes are supported: normal mode and + "sample and hold" mode (i.e. low power mode). + In the sample and hold mode, the DAC core converts data, then holds the + converted voltage on a capacitor. When not converting, the DAC cores and + buffer are completely turned off between samples and the DAC output is + tri-stated, therefore reducing the overall power consumption. A new + stabilization period is needed before each new conversion. + + The sample and hold allow setting internal or external voltage @ + low power consumption cost (output value can be at any given rate either + by CPU or DMA). + + The Sample and hold block and registers uses either LSI & run in + several power modes: run mode, sleep mode, low power run, low power sleep + mode & stop1 mode. + + Low power stop1 mode allows only static conversion. + + To enable Sample and Hold mode + Enable LSI using HAL_RCC_OscConfig with RCC_OSCILLATORTYPE_LSI & + RCC_LSI_ON parameters. + + Use DAC_InitStructure.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_ENABLE; + & DAC_ChannelConfTypeDef.DAC_SampleAndHoldConfig.DAC_SampleTime, + DAC_HoldTime & DAC_RefreshTime; + + *** DAC calibration feature *** + =================================== + [..] + (#) The 2 converters (channel1 & channel2) provide calibration capabilities. + (++) Calibration aims at correcting some offset of output buffer. + (++) The DAC uses either factory calibration settings OR user defined + calibration (trimming) settings (i.e. trimming mode). + (++) The user defined settings can be figured out using self calibration + handled by HAL_DACEx_SelfCalibrate. + (++) HAL_DACEx_SelfCalibrate: + (+++) Runs automatically the calibration. + (+++) Enables the user trimming mode + (+++) Updates a structure with trimming values with fresh calibration + results. + The user may store the calibration results for larger + (ex monitoring the trimming as a function of temperature + for instance) + + *** DAC wave generation feature *** + =================================== + [..] + Both DAC channels can be used to generate + (#) Noise wave + (#) Triangle wave + + *** DAC data format *** + ======================= + [..] + The DAC data format can be: + (#) 8-bit right alignment using DAC_ALIGN_8B_R + (#) 12-bit left alignment using DAC_ALIGN_12B_L + (#) 12-bit right alignment using DAC_ALIGN_12B_R + + *** DAC data value to voltage correspondence *** + ================================================ + [..] + The analog output voltage on each DAC channel pin is determined + by the following equation: + [..] + DAC_OUTx = VREF+ * DOR / 4095 + (+) with DOR is the Data Output Register + [..] + VEF+ is the input voltage reference (refer to the device datasheet) + [..] + e.g. To set DAC_OUT1 to 0.7V, use + (+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V + + *** DMA requests *** + ===================== + [..] + A DMA1 request can be generated when an external trigger (but not a software trigger) + occurs if DMA1 requests are enabled using HAL_DAC_Start_DMA(). + DMA requests are mapped as following: + (#) DAC channel1: mapped on DMA channel1 request 8 + (#) DAC channel2: mapped on DMA channel2 request 9 + + [..] + (@) For Dual mode and specific signal (Triangle and noise) generation please + refer to Extended Features Driver description + + ##### How to use this driver ##### + ============================================================================== + [..] + (+) DAC APB clock must be enabled to get write access to DAC + registers using HAL_DAC_Init() + (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode. + (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function. + (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA() functions. + + *** Calibration mode IO operation *** + ====================================== + [..] + (+) Retrieve the factory trimming (calibration settings) using HAL_DACEx_GetTrimOffset() + (+) Run the calibration using HAL_DACEx_SelfCalibrate() + (+) Update the trimming while DAC running using HAL_DACEx_SetUserTrimming() + + *** Polling mode IO operation *** + ================================= + [..] + (+) Start the DAC peripheral using HAL_DAC_Start() + (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function. + (+) Stop the DAC peripheral using HAL_DAC_Stop() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length + of data to be transferred at each end of conversion + First issued trigger will start the conversion of the value previously set by HAL_DAC_SetValue(). + (+) At the middle of data transfer HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 + (+) In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler. + HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() and + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1() + (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_DAC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions @ref HAL_DAC_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. + (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. + (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. + (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_DAC_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. + (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. + (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. + (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + (+) All Callbacks + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the @ref HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_DAC_Init + and @ref HAL_DAC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_DAC_Init and @ref HAL_DAC_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_DAC_RegisterCallback before calling @ref HAL_DAC_DeInit + or @ref HAL_DAC_Init function. + + When The compilation define USE_HAL_DAC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + *** DAC HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DAC HAL driver. + + (+) __HAL_DAC_ENABLE : Enable the DAC peripheral + (+) __HAL_DAC_DISABLE : Disable the DAC peripheral + (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags + (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status + + [..] + (@) You can refer to the DAC HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED +#if defined(DAC1) + +/** @defgroup DAC DAC + * @brief DAC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup DAC_Private_Constants DAC Private Constants + * @{ + */ +#define TIMEOUT_DAC_CALIBCONFIG 1U /* 1 ms */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions -------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Functions DAC Exported Functions + * @{ + */ + +/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DAC. + (+) De-initialize the DAC. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DAC peripheral according to the specified parameters + * in the DAC_InitStruct and initialize the associated handle. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac) +{ + /* Check DAC handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + if (hdac->State == HAL_DAC_STATE_RESET) + { +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the DAC Callback settings */ + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; + + if (hdac->MspInitCallback == NULL) + { + hdac->MspInitCallback = HAL_DAC_MspInit; + } +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Allocate lock resource and initialize it */ + hdac->Lock = HAL_UNLOCKED; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the low level hardware */ + hdac->MspInitCallback(hdac); +#else + /* Init the low level hardware */ + HAL_DAC_MspInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitialize the DAC peripheral registers to their default reset values. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac) +{ + /* Check DAC handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + if (hdac->MspDeInitCallback == NULL) + { + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + } + /* DeInit the low level hardware */ + hdac->MspDeInitCallback(hdac); +#else + /* DeInit the low level hardware */ + HAL_DAC_MspDeInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + + if (Channel == DAC_CHANNEL_1) + { + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE) + { + /* Enable the selected DAC software conversion */ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1); + } + } + else + { + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << Channel)) + { + /* Enable the selected DAC software conversion*/ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2); + } + } + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param pData The destination peripheral Buffer address. + * @param Length The length of data to be transferred from memory to DAC peripheral + * @param Alignment Specifies the data alignment for DAC channel. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, + uint32_t Alignment) +{ + HAL_StatusTypeDef status; + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + if (Channel == DAC_CHANNEL_1) + { + /* Set the DMA transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1; + + /* Set the DMA half transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1; + + /* Set the DMA error callback for channel1 */ + hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1; + + /* Enable the selected DAC channel1 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); + + /* Case of use of channel 1 */ + switch (Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R1; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L1; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R1; + break; + default: + break; + } + } + else + { + /* Set the DMA transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2; + + /* Set the DMA half transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2; + + /* Set the DMA error callback for channel2 */ + hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2; + + /* Enable the selected DAC channel2 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); + + /* Case of use of channel 2 */ + switch (Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R2; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L2; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R2; + break; + default: + break; + } + } + + /* Enable the DMA channel */ + if (Channel == DAC_CHANNEL_1) + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1); + + /* Enable the DMA channel */ + status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length); + } + else + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2); + + /* Enable the DMA channel */ + status = HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdac); + + if (status == HAL_OK) + { + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + } + else + { + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + } + + /* Return function status */ + return status; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the selected DAC channel DMA request */ + hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << (Channel & 0x10UL)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Disable the DMA channel */ + + /* Channel1 is used */ + if (Channel == DAC_CHANNEL_1) + { + /* Disable the DMA channel */ + status = HAL_DMA_Abort(hdac->DMA_Handle1); + + /* Disable the DAC DMA underrun interrupt */ + __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1); + } + else /* Channel2 is used for */ + { + /* Disable the DMA channel */ + status = HAL_DMA_Abort(hdac->DMA_Handle2); + + /* Disable the DAC DMA underrun interrupt */ + __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2); + } + + /* Check if DMA Channel effectively disabled */ + if (status != HAL_OK) + { + /* Update DAC state machine to error */ + hdac->State = HAL_DAC_STATE_ERROR; + } + else + { + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Handles DAC interrupt request + * This function uses the interruption of DMA + * underrun. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) +{ + if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1)) + { + /* Check underrun flag of DAC channel 1 */ + if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to chanel1 DMA underrun error */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH1); + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR1); + + /* Disable the selected DAC channel1 DMA request */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); + + /* Error callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->DMAUnderrunCallbackCh1(hdac); +#else + HAL_DAC_DMAUnderrunCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + } + + if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2)) + { + /* Check underrun flag of DAC channel 2 */ + if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to channel2 DMA underrun error */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH2); + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR2); + + /* Disable the selected DAC channel2 DMA request */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); + + /* Error callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->DMAUnderrunCallbackCh2(hdac); +#else + HAL_DACEx_DMAUnderrunCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Set the specified data holding register value for DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Alignment Specifies the data alignment. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data Data to be loaded in the selected data holding register. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)hdac->Instance; + if (Channel == DAC_CHANNEL_1) + { + tmp += DAC_DHR12R1_ALIGNMENT(Alignment); + } + else + { + tmp += DAC_DHR12R2_ALIGNMENT(Alignment); + } + + /* Set the DAC channel selected data holding register */ + *(__IO uint32_t *) tmp = Data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Conversion complete callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels. + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Returns the DAC channel data output register value */ + if (Channel == DAC_CHANNEL_1) + { + return hdac->Instance->DOR1; + } + else + { + return hdac->Instance->DOR2; + } +} + +/** + * @brief Configures the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC configuration structure. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) +{ + uint32_t tmpreg1; + uint32_t tmpreg2; + uint32_t tickstart = 0U; + + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer)); + assert_param(IS_DAC_CHIP_CONNECTION(sConfig->DAC_ConnectOnChipPeripheral)); + assert_param(IS_DAC_TRIMMING(sConfig->DAC_UserTrimming)); + if ((sConfig->DAC_UserTrimming) == DAC_TRIMMING_USER) + { + assert_param(IS_DAC_TRIMMINGVALUE(sConfig->DAC_TrimmingValue)); + } + assert_param(IS_DAC_SAMPLEANDHOLD(sConfig->DAC_SampleAndHold)); + if ((sConfig->DAC_SampleAndHold) == DAC_SAMPLEANDHOLD_ENABLE) + { + assert_param(IS_DAC_SAMPLETIME(sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime)); + assert_param(IS_DAC_HOLDTIME(sConfig->DAC_SampleAndHoldConfig.DAC_HoldTime)); + assert_param(IS_DAC_REFRESHTIME(sConfig->DAC_SampleAndHoldConfig.DAC_RefreshTime)); + } + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + if (sConfig->DAC_SampleAndHold == DAC_SAMPLEANDHOLD_ENABLE) + /* Sample on old configuration */ + { + /* SampleTime */ + if (Channel == DAC_CHANNEL_1) + { + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* SHSR1 can be written when BWST1 is cleared */ + while (((hdac->Instance->SR) & DAC_SR_BWST1) != 0UL) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > TIMEOUT_DAC_CALIBCONFIG) + { + /* Update error code */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_TIMEOUT); + + /* Change the DMA state */ + hdac->State = HAL_DAC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + HAL_Delay(1); + hdac->Instance->SHSR1 = sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime; + } + else /* Channel 2 */ + { + /* SHSR2 can be written when BWST2 is cleared */ + + while (((hdac->Instance->SR) & DAC_SR_BWST2) != 0UL) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > TIMEOUT_DAC_CALIBCONFIG) + { + /* Update error code */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_TIMEOUT); + + /* Change the DMA state */ + hdac->State = HAL_DAC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + HAL_Delay(1U); + hdac->Instance->SHSR2 = sConfig->DAC_SampleAndHoldConfig.DAC_SampleTime; + } + + /* HoldTime */ + MODIFY_REG(hdac->Instance->SHHR, DAC_SHHR_THOLD1 << (Channel & 0x10UL), (sConfig->DAC_SampleAndHoldConfig.DAC_HoldTime) << (Channel & 0x10UL)); + /* RefreshTime */ + MODIFY_REG(hdac->Instance->SHRR, DAC_SHRR_TREFRESH1 << (Channel & 0x10UL), (sConfig->DAC_SampleAndHoldConfig.DAC_RefreshTime) << (Channel & 0x10UL)); + } + + if (sConfig->DAC_UserTrimming == DAC_TRIMMING_USER) + /* USER TRIMMING */ + { + /* Get the DAC CCR value */ + tmpreg1 = hdac->Instance->CCR; + /* Clear trimming value */ + tmpreg1 &= ~(((uint32_t)(DAC_CCR_OTRIM1)) << (Channel & 0x10UL)); + /* Configure for the selected trimming offset */ + tmpreg2 = sConfig->DAC_TrimmingValue; + /* Calculate CCR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC CCR */ + hdac->Instance->CCR = tmpreg1; + } + /* else factory trimming is used (factory setting are available at reset)*/ + /* SW Nothing has nothing to do */ + + /* Get the DAC MCR value */ + tmpreg1 = hdac->Instance->MCR; + /* Clear DAC_MCR_MODEx bits */ + tmpreg1 &= ~(((uint32_t)(DAC_MCR_MODE1)) << (Channel & 0x10UL)); + /* Configure for the selected DAC channel: mode, buffer output & on chip peripheral connect */ + tmpreg2 = (sConfig->DAC_SampleAndHold | sConfig->DAC_OutputBuffer | sConfig->DAC_ConnectOnChipPeripheral); + /* Calculate MCR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC MCR */ + hdac->Instance->MCR = tmpreg1; + + /* DAC in normal operating mode hence clear DAC_CR_CENx bit */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_CEN1 << (Channel & 0x10UL)); + + /* Get the DAC CR value */ + tmpreg1 = hdac->Instance->CR; + /* Clear TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1)) << (Channel & 0x10UL)); + /* Configure for the selected DAC channel: trigger */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + tmpreg2 = sConfig->DAC_Trigger; + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC CR */ + hdac->Instance->CR = tmpreg1; + /* Disable wave generation */ + hdac->Instance->CR &= ~(DAC_CR_WAVE1 << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DAC state. + (+) Check the DAC Errors. + +@endverbatim + * @{ + */ + +/** + * @brief return the DAC handle state + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL state + */ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac) +{ + /* Return DAC handle state */ + return hdac->State; +} + + +/** + * @brief Return the DAC error code + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval DAC Error Code + */ +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac) +{ + return hdac->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DAC Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hdac DAC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_ERROR_INVALID_CALLBACK DAC Error Callback ID + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID + * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID + * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID + * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdac); + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = pCallback; + break; + case HAL_DAC_CH2_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_ERROR_ID : + hdac->ErrorCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh2 = pCallback; + break; + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdac); + return status; +} + +/** + * @brief Unregister a User DAC Callback + * DAC Callback is redirected to the weak (surcharged) predefined callback + * @param hdac DAC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Transfer Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID + * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID + * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID + * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * @arg @ref HAL_DAC_ALL_CB_ID DAC All callbacks + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdac); + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + break; + case HAL_DAC_CH2_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + break; + case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + break; + case HAL_DAC_CH2_ERROR_ID : + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + break; + case HAL_DAC_CH2_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; + break; + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + case HAL_DAC_ALL_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; + hdac->MspInitCallback = HAL_DAC_MspInit; + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdac); + return status; +} +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Private_Functions + * @{ + */ + +/** + * @brief DMA conversion complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* Conversion complete callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvHalfCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvHalfCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ErrorCallbackCh1(hdac); +#else + HAL_DAC_ErrorCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c new file mode 100644 index 0000000..330a2ce --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c @@ -0,0 +1,621 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dac_ex.c + * @author MCD Application Team + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the DAC peripheral. + * + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** Dual mode IO operation *** + ============================== + (+) When Dual mode is enabled (i.e. DAC Channel1 and Channel2 are used simultaneously) : + Use HAL_DACEx_DualGetValue() to get digital data to be converted and use + HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in + Channel 1 and Channel 2. + + *** Signal generation operation *** + =================================== + (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. + (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. + + (+) HAL_DACEx_SelfCalibrate to calibrate one DAC channel. + (+) HAL_DACEx_SetUserTrimming to set user trimming value. + (+) HAL_DACEx_GetTrimOffset to retrieve trimming value (factory setting + after reset, user setting if HAL_DACEx_SetUserTrimming have been used + at least one time after reset). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED + +#if defined(DAC1) + +/** @defgroup DACEx DACEx + * @brief DAC Extended HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Functions DACEx Exported Functions + * @{ + */ + +/** @defgroup DACEx_Exported_Functions_Group2 IO operation functions + * @brief Extended IO operation functions + * +@verbatim + ============================================================================== + ##### Extended features functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + (+) Get result of dual mode conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Amplitude Select max triangle amplitude. + * This parameter can be one of the following values: + * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 + * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 + * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 + * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 + * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 + * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 + * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 + * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 + * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 + * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 + * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 + * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the triangle wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_1 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Amplitude Unmask DAC channel LFSR for noise wave generation. + * This parameter can be one of the following values: + * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation + * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the noise wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_0 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the specified data holding register value for dual DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Alignment Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * DAC_ALIGN_8B_R: 8bit right data alignment selected + * DAC_ALIGN_12B_L: 12bit left data alignment selected + * DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data1 Data for DAC Channel1 to be loaded in the selected data holding register. + * @param Data2 Data for DAC Channel2 to be loaded in the selected data holding register. + * @note In dual mode, a unique register access is required to write in both + * DAC channels at the same time. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2) +{ + uint32_t data; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (Alignment == DAC_ALIGN_8B_R) + { + data = ((uint32_t)Data2 << 8U) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16U) | Data1; + } + + tmp = (uint32_t)hdac->Instance; + tmp += DAC_DHR12RD_ALIGNMENT(Alignment); + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Conversion complete callback in non-blocking mode for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ConvCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non-blocking mode for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Run the self calibration of one DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC channel configuration structure. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval Updates DAC_TrimmingValue. , DAC_UserTrimming set to DAC_UserTrimming + * @retval HAL status + * @note Calibration runs about 7 ms. + */ + +HAL_StatusTypeDef HAL_DACEx_SelfCalibrate(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + __IO uint32_t tmp; + uint32_t trimmingvalue; + uint32_t delta; + + /* store/restore channel configuration structure purpose */ + uint32_t oldmodeconfiguration; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Check the DAC handle allocation */ + /* Check if DAC running */ + if (hdac == NULL) + { + status = HAL_ERROR; + } + else if (hdac->State == HAL_DAC_STATE_BUSY) + { + status = HAL_ERROR; + } + else + { + /* Process locked */ + __HAL_LOCK(hdac); + + /* Store configuration */ + oldmodeconfiguration = (hdac->Instance->MCR & (DAC_MCR_MODE1 << (Channel & 0x10UL))); + + /* Disable the selected DAC channel */ + CLEAR_BIT((hdac->Instance->CR), (DAC_CR_EN1 << (Channel & 0x10UL))); + + /* Set mode in MCR for calibration */ + MODIFY_REG(hdac->Instance->MCR, (DAC_MCR_MODE1 << (Channel & 0x10UL)), 0U); + + /* Set DAC Channel1 DHR register to the middle value */ + tmp = (uint32_t)hdac->Instance; + + if (Channel == DAC_CHANNEL_1) + { + tmp += DAC_DHR12R1_ALIGNMENT(DAC_ALIGN_12B_R); + } + else + { + tmp += DAC_DHR12R2_ALIGNMENT(DAC_ALIGN_12B_R); + } + + *(__IO uint32_t *) tmp = 0x0800U; + + /* Enable the selected DAC channel calibration */ + /* i.e. set DAC_CR_CENx bit */ + SET_BIT((hdac->Instance->CR), (DAC_CR_CEN1 << (Channel & 0x10UL))); + + /* Init trimming counter */ + /* Medium value */ + trimmingvalue = 16U; + delta = 8U; + while (delta != 0U) + { + /* Set candidate trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (trimmingvalue << (Channel & 0x10UL))); + + /* tOFFTRIMmax delay x ms as per datasheet (electrical characteristics */ + /* i.e. minimum time needed between two calibration steps */ + HAL_Delay(1); + + if ((hdac->Instance->SR & (DAC_SR_CAL_FLAG1 << (Channel & 0x10UL))) == (DAC_SR_CAL_FLAG1 << (Channel & 0x10UL))) + { + /* DAC_SR_CAL_FLAGx is HIGH try higher trimming */ + trimmingvalue -= delta; + } + else + { + /* DAC_SR_CAL_FLAGx is LOW try lower trimming */ + trimmingvalue += delta; + } + delta >>= 1U; + } + + /* Still need to check if right calibration is current value or one step below */ + /* Indeed the first value that causes the DAC_SR_CAL_FLAGx bit to change from 0 to 1 */ + /* Set candidate trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (trimmingvalue << (Channel & 0x10UL))); + + /* tOFFTRIMmax delay x ms as per datasheet (electrical characteristics */ + /* i.e. minimum time needed between two calibration steps */ + HAL_Delay(1U); + + if ((hdac->Instance->SR & (DAC_SR_CAL_FLAG1 << (Channel & 0x10UL))) == 0UL) + { + /* OPAMP_CSR_OUTCAL is actually one value more */ + trimmingvalue++; + /* Set right trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (trimmingvalue << (Channel & 0x10UL))); + } + + /* Disable the selected DAC channel calibration */ + /* i.e. clear DAC_CR_CENx bit */ + CLEAR_BIT((hdac->Instance->CR), (DAC_CR_CEN1 << (Channel & 0x10UL))); + + sConfig->DAC_TrimmingValue = trimmingvalue; + sConfig->DAC_UserTrimming = DAC_TRIMMING_USER; + + /* Restore configuration */ + MODIFY_REG(hdac->Instance->MCR, (DAC_MCR_MODE1 << (Channel & 0x10UL)), oldmodeconfiguration); + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + } + + return status; +} + +/** + * @brief Set the trimming mode and trimming value (user trimming mode applied). + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC configuration structure updated with new DAC trimming value. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param NewTrimmingValue DAC new trimming value + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_DACEx_SetUserTrimming(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel, + uint32_t NewTrimmingValue) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_NEWTRIMMINGVALUE(NewTrimmingValue)); + + /* Check the DAC handle allocation */ + if (hdac == NULL) + { + status = HAL_ERROR; + } + else + { + /* Process locked */ + __HAL_LOCK(hdac); + + /* Set new trimming */ + MODIFY_REG(hdac->Instance->CCR, (DAC_CCR_OTRIM1 << (Channel & 0x10UL)), (NewTrimmingValue << (Channel & 0x10UL))); + + /* Update trimming mode */ + sConfig->DAC_UserTrimming = DAC_TRIMMING_USER; + sConfig->DAC_TrimmingValue = NewTrimmingValue; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + } + return status; +} + +/** + * @brief Return the DAC trimming value. + * @param hdac DAC handle + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval Trimming value : range: 0->31 + * + */ + +uint32_t HAL_DACEx_GetTrimOffset(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameter */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Retrieve trimming */ + return ((hdac->Instance->CCR & (DAC_CCR_OTRIM1 << (Channel & 0x10UL))) >> (Channel & 0x10UL)); +} + +/** + * @} + */ + +/** @defgroup DACEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +/** + * @brief Return the last data output value of the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac) +{ + uint32_t tmp = 0U; + + tmp |= hdac->Instance->DOR1; + + tmp |= hdac->Instance->DOR2 << 16U; + + /* Returns the DAC channel data output register value */ + return tmp; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DACEx_Private_Functions DACEx private functions + * @brief Extended private functions + * @{ + */ + +/** + * @brief DMA conversion complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvCpltCallbackCh2(hdac); +#else + HAL_DACEx_ConvCpltCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* Conversion complete callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvHalfCpltCallbackCh2(hdac); +#else + HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ErrorCallbackCh2(hdac); +#else + HAL_DACEx_ErrorCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c new file mode 100644 index 0000000..6548d57 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c @@ -0,0 +1,1192 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX + thanks to: + (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(); + (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function to register callbacks with HAL_DMA_RegisterCallback(). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); + + /* Compute the channel index */ +#if defined(DMA2) + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; +#endif + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ + CLEAR_BIT(hdma->Instance->CCR, (DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + + /* Set the DMA Channel configuration */ + SET_BIT(hdma->Instance->CCR, (hdma->Init.Direction | \ + hdma->Init.PeriphInc | hdma->Init.MemInc | \ + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | \ + hdma->Init.Mode | hdma->Init.Priority)); + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* Compute the channel index */ +#if defined(DMA2) + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; +#endif + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + /* Reset the DMAMUX channel that corresponds to the DMA channel */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Reset Request generator parameters if any */ + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + (+) Register and Unregister DMA callbacks + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Change the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if (NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + + /* Check if DMAMUX Synchronization is enabled*/ + if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Change the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA peripheral handle */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart; + + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU); + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + +#if defined(DMA2) + while ((hdma->DmaBaseAddress->ISR & temp) == 0U) + { + if ((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } +#else + while (0U == __HAL_DMA_GET_FLAG(hdma, temp)) + { + if (0U != __HAL_DMA_GET_FLAG(hdma, (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU)))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } +#endif + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + /*Check for DMAMUX Request generator (if used) overrun status */ + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } + + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))); +#endif + } + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ +#if defined(DMA2) + uint32_t flag_it = hdma->DmaBaseAddress->ISR; +#else + uint32_t flag_it = DMA1->ISR; +#endif + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((0U != (flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)))) && (0U != (source_it & DMA_IT_TC))) + { + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + return; +} + +/** + * @brief Register callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback Pointer to private callbacsk function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA handle state. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + /* Return the DMA error code */ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on channel number + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t channel_number; + +#if defined(DMA2) + /* check if instance is not outside the DMA channel range */ + if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) + { + /* DMA1 */ + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; + } + else + { + /* DMA2 */ + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel7 + (hdma->ChannelIndex >> 2U)); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U) + 7U); + } +#else + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)(uint32_t)((uint32_t)DMAMUX1_Channel0 + ((hdma->ChannelIndex >> 2U) * ((uint32_t)DMAMUX1_Channel1 - (uint32_t)DMAMUX1_Channel0))); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; +#endif + + /* Initialize the field DMAmuxChannelStatus to DMAMUX1_ChannelStatus base */ + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + + /* Initialize the field DMAmuxChannelStatusMask with the corresponding index of the DMAMUX channel selected for the current ChannelIndex */ + hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1FU); +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ + +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + /* DMA Channels are connected to DMAMUX1 request generator blocks*/ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + + /* here "Request" is either DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR3, i.e. <= 4*/ + hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c new file mode 100644 index 0000000..1b2b909 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c @@ -0,0 +1,320 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler. + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be + called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + + +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + (+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from + the DMAMUX IRQ handler + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pSyncConfig Pointer to HAL_DMA_MuxSyncConfigTypeDef contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + /*Check if the DMA state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG(hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID), \ + (pSyncConfig->SyncSignalID | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ + pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos))); + + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pRequestGeneratorConfig Pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + HAL_StatusTypeDef status; + HAL_DMA_StateTypeDef temp_state = hdma->State; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if (hdma->DMAmuxRequestGen == 0U) + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* error status */ + status = HAL_ERROR; + } + else if (((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY)) + { + /* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */ + + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters*/ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \ + pRequestGeneratorConfig->Polarity; + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if (hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c new file mode 100644 index 0000000..db1b102 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c @@ -0,0 +1,681 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two diffenrents + interrupt pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x04u /* 0x10: offset between CPU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between CPU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + EXTI->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* Configure event mode : read current mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configiguration structure */ + pExtiConfig->Line = hexti->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + } + + /* Get falling configuration */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = ((regval << (EXTI_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); + } + else + { + pExtiConfig->GPIOSel = 0x00u; + } + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + EXTI->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicaated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->RisingCallback = pPendingCbfn; + hexti->FallingCallback = pPendingCbfn; + break; + + case HAL_EXTI_RISING_CB_ID: + hexti->RisingCallback = pPendingCbfn; + break; + + case HAL_EXTI_FALLING_CB_ID: + hexti->FallingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get rising edge pending bit */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->RisingCallback != NULL) + { + hexti->RisingCallback(); + } + } + + /* Get falling edge pending bit */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->FallingCallback != NULL) + { + hexti->FallingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending bit */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get rising edge pending bit */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending register address */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get falling edge pending register address */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* Clear Pending bit */ + *regaddr = maskline; +} + + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameterd */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c new file mode 100644 index 0000000..b649f4c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_fdcan.c @@ -0,0 +1,3455 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_fdcan.c + * @author MCD Application Team + * @brief FDCAN HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Flexible DataRate Controller Area Network + * (FDCAN) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Configuration and Control functions + * + Peripheral State and Error functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the FDCAN peripheral using HAL_FDCAN_Init function. + + (#) If needed , configure the reception filters and optional features using + the following configuration functions: + (++) HAL_FDCAN_ConfigFilter + (++) HAL_FDCAN_ConfigGlobalFilter + (++) HAL_FDCAN_ConfigExtendedIdMask + (++) HAL_FDCAN_ConfigRxFifoOverwrite + (++) HAL_FDCAN_ConfigRamWatchdog + (++) HAL_FDCAN_ConfigTimestampCounter + (++) HAL_FDCAN_EnableTimestampCounter + (++) HAL_FDCAN_DisableTimestampCounter + (++) HAL_FDCAN_ConfigTimeoutCounter + (++) HAL_FDCAN_EnableTimeoutCounter + (++) HAL_FDCAN_DisableTimeoutCounter + (++) HAL_FDCAN_ConfigTxDelayCompensation + (++) HAL_FDCAN_EnableTxDelayCompensation + (++) HAL_FDCAN_DisableTxDelayCompensation + (++) HAL_FDCAN_EnableISOMode + (++) HAL_FDCAN_DisableISOMode + (++) HAL_FDCAN_EnableEdgeFiltering + (++) HAL_FDCAN_DisableEdgeFiltering + + (#) Start the FDCAN module using HAL_FDCAN_Start function. At this level + the node is active on the bus: it can send and receive messages. + + (#) The following Tx control functions can only be called when the FDCAN + module is started: + (++) HAL_FDCAN_AddMessageToTxFifoQ + (++) HAL_FDCAN_AbortTxRequest + + (#) After having submitted a Tx request in Tx Fifo or Queue, it is possible to + get Tx buffer location used to place the Tx request thanks to + HAL_FDCAN_GetLatestTxFifoQRequestBuffer API. + It is then possible to abort later on the corresponding Tx Request using + HAL_FDCAN_AbortTxRequest API. + + (#) When a message is received into the FDCAN message RAM, it can be + retrieved using the HAL_FDCAN_GetRxMessage function. + + (#) Calling the HAL_FDCAN_Stop function stops the FDCAN module by entering + it to initialization mode and re-enabling access to configuration + registers through the configuration functions listed here above. + + (#) All other control functions can be called any time after initialization + phase, no matter if the FDCAN module is started or stopped. + + *** Polling mode operation *** + ============================== + [..] + (#) Reception and transmission states can be monitored via the following + functions: + (++) HAL_FDCAN_IsTxBufferMessagePending + (++) HAL_FDCAN_GetRxFifoFillLevel + (++) HAL_FDCAN_GetTxFifoFreeLevel + + *** Interrupt mode operation *** + ================================ + [..] + (#) There are two interrupt lines: line 0 and 1. + By default, all interrupts are assigned to line 0. Interrupt lines + can be configured using HAL_FDCAN_ConfigInterruptLines function. + + (#) Notifications are activated using HAL_FDCAN_ActivateNotification + function. Then, the process can be controlled through one of the + available user callbacks: HAL_FDCAN_xxxCallback. + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_FDCAN_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_FDCAN_RegisterCallback() or HAL_FDCAN_RegisterXXXCallback() + to register an interrupt callback. + + Function @ref HAL_FDCAN_RegisterCallback() allows to register following callbacks: + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) HighPriorityMessageCallback : High Priority Message Callback. + (+) TimestampWraparoundCallback : Timestamp Wraparound Callback. + (+) TimeoutOccurredCallback : Timeout Occurred Callback. + (+) ErrorCallback : Error Callback. + (+) MspInitCallback : FDCAN MspInit. + (+) MspDeInitCallback : FDCAN MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callbacks TxEventFifoCallback, RxFifo0Callback, RxFifo1Callback, + TxBufferCompleteCallback, TxBufferAbortCallback and ErrorStatusCallback use dedicated + register callbacks : respectively @ref HAL_FDCAN_RegisterTxEventFifoCallback(), + @ref HAL_FDCAN_RegisterRxFifo0Callback(), @ref HAL_FDCAN_RegisterRxFifo1Callback(), + @ref HAL_FDCAN_RegisterTxBufferCompleteCallback(), @ref HAL_FDCAN_RegisterTxBufferAbortCallback() + and @ref HAL_FDCAN_RegisterErrorStatusCallback(). + + Use function @ref HAL_FDCAN_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_FDCAN_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) HighPriorityMessageCallback : High Priority Message Callback. + (+) TimestampWraparoundCallback : Timestamp Wraparound Callback. + (+) TimeoutOccurredCallback : Timeout Occurred Callback. + (+) ErrorCallback : Error Callback. + (+) MspInitCallback : FDCAN MspInit. + (+) MspDeInitCallback : FDCAN MspDeInit. + + For specific callbacks TxEventFifoCallback, RxFifo0Callback, RxFifo1Callback, + TxBufferCompleteCallback and TxBufferAbortCallback, use dedicated + unregister callbacks : respectively @ref HAL_FDCAN_UnRegisterTxEventFifoCallback(), + @ref HAL_FDCAN_UnRegisterRxFifo0Callback(), @ref HAL_FDCAN_UnRegisterRxFifo1Callback(), + @ref HAL_FDCAN_UnRegisterTxBufferCompleteCallback(), @ref HAL_FDCAN_UnRegisterTxBufferAbortCallback() + and @ref HAL_FDCAN_UnRegisterErrorStatusCallback(). + + By default, after the @ref HAL_FDCAN_Init() and when the state is HAL_FDCAN_STATE_RESET, + all callbacks are set to the corresponding weak functions: + examples @ref HAL_FDCAN_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the @ref HAL_FDCAN_Init()/ @ref HAL_FDCAN_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the @ref HAL_FDCAN_Init()/ @ref HAL_FDCAN_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_FDCAN_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_FDCAN_STATE_READY or HAL_FDCAN_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_FDCAN_RegisterCallback() before calling @ref HAL_FDCAN_DeInit() + or @ref HAL_FDCAN_Init() function. + + When The compilation define USE_HAL_FDCAN_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +#if defined(FDCAN1) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FDCAN FDCAN + * @brief FDCAN HAL module driver + * @{ + */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FDCAN_Private_Constants + * @{ + */ +#define FDCAN_TIMEOUT_VALUE 10U + +#define FDCAN_TX_EVENT_FIFO_MASK (FDCAN_IR_TEFL | FDCAN_IR_TEFF | FDCAN_IR_TEFN) +#define FDCAN_RX_FIFO0_MASK (FDCAN_IR_RF0L | FDCAN_IR_RF0F | FDCAN_IR_RF0N) +#define FDCAN_RX_FIFO1_MASK (FDCAN_IR_RF1L | FDCAN_IR_RF1F | FDCAN_IR_RF1N) +#define FDCAN_ERROR_MASK (FDCAN_IR_ELO | FDCAN_IR_WDI | FDCAN_IR_PEA | FDCAN_IR_PED | FDCAN_IR_ARA) +#define FDCAN_ERROR_STATUS_MASK (FDCAN_IR_EP | FDCAN_IR_EW | FDCAN_IR_BO) + +#define FDCAN_ELEMENT_MASK_STDID ((uint32_t)0x1FFC0000U) /* Standard Identifier */ +#define FDCAN_ELEMENT_MASK_EXTID ((uint32_t)0x1FFFFFFFU) /* Extended Identifier */ +#define FDCAN_ELEMENT_MASK_RTR ((uint32_t)0x20000000U) /* Remote Transmission Request */ +#define FDCAN_ELEMENT_MASK_XTD ((uint32_t)0x40000000U) /* Extended Identifier */ +#define FDCAN_ELEMENT_MASK_ESI ((uint32_t)0x80000000U) /* Error State Indicator */ +#define FDCAN_ELEMENT_MASK_TS ((uint32_t)0x0000FFFFU) /* Timestamp */ +#define FDCAN_ELEMENT_MASK_DLC ((uint32_t)0x000F0000U) /* Data Length Code */ +#define FDCAN_ELEMENT_MASK_BRS ((uint32_t)0x00100000U) /* Bit Rate Switch */ +#define FDCAN_ELEMENT_MASK_FDF ((uint32_t)0x00200000U) /* FD Format */ +#define FDCAN_ELEMENT_MASK_EFC ((uint32_t)0x00800000U) /* Event FIFO Control */ +#define FDCAN_ELEMENT_MASK_MM ((uint32_t)0xFF000000U) /* Message Marker */ +#define FDCAN_ELEMENT_MASK_FIDX ((uint32_t)0x7F000000U) /* Filter Index */ +#define FDCAN_ELEMENT_MASK_ANMF ((uint32_t)0x80000000U) /* Accepted Non-matching Frame */ +#define FDCAN_ELEMENT_MASK_ET ((uint32_t)0x00C00000U) /* Event type */ + +#define SRAMCAN_FLS_NBR (28U) /* Max. Filter List Standard Number */ +#define SRAMCAN_FLE_NBR ( 8U) /* Max. Filter List Extended Number */ +#define SRAMCAN_RF0_NBR ( 3U) /* RX FIFO 0 Elements Number */ +#define SRAMCAN_RF1_NBR ( 3U) /* RX FIFO 1 Elements Number */ +#define SRAMCAN_TEF_NBR ( 3U) /* TX Event FIFO Elements Number */ +#define SRAMCAN_TFQ_NBR ( 3U) /* TX FIFO/Queue Elements Number */ + +#define SRAMCAN_FLS_SIZE ( 1U * 4U) /* Filter Standard Element Size in bytes */ +#define SRAMCAN_FLE_SIZE ( 2U * 4U) /* Filter Extended Element Size in bytes */ +#define SRAMCAN_RF0_SIZE (18U * 4U) /* RX FIFO 0 Elements Size in bytes */ +#define SRAMCAN_RF1_SIZE (18U * 4U) /* RX FIFO 1 Elements Size in bytes */ +#define SRAMCAN_TEF_SIZE ( 2U * 4U) /* TX Event FIFO Elements Size in bytes */ +#define SRAMCAN_TFQ_SIZE (18U * 4U) /* TX FIFO/Queue Elements Size in bytes */ + +#define SRAMCAN_FLSSA ((uint32_t)0) /* Filter List Standard Start Address */ +#define SRAMCAN_FLESA ((uint32_t)(SRAMCAN_FLSSA + (SRAMCAN_FLS_NBR * SRAMCAN_FLS_SIZE))) /* Filter List Extended Start Address */ +#define SRAMCAN_RF0SA ((uint32_t)(SRAMCAN_FLESA + (SRAMCAN_FLE_NBR * SRAMCAN_FLE_SIZE))) /* Rx FIFO 0 Start Address */ +#define SRAMCAN_RF1SA ((uint32_t)(SRAMCAN_RF0SA + (SRAMCAN_RF0_NBR * SRAMCAN_RF0_SIZE))) /* Rx FIFO 1 Start Address */ +#define SRAMCAN_TEFSA ((uint32_t)(SRAMCAN_RF1SA + (SRAMCAN_RF1_NBR * SRAMCAN_RF1_SIZE))) /* Tx Event FIFO Start Address */ +#define SRAMCAN_TFQSA ((uint32_t)(SRAMCAN_TEFSA + (SRAMCAN_TEF_NBR * SRAMCAN_TEF_SIZE))) /* Tx FIFO/Queue Start Address */ +#define SRAMCAN_SIZE ((uint32_t)(SRAMCAN_TFQSA + (SRAMCAN_TFQ_NBR * SRAMCAN_TFQ_SIZE))) /* Message RAM size */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +static const uint8_t DLCtoBytes[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, 24, 32, 48, 64}; + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup FDCAN_Private_Functions_Prototypes + * @{ + */ +static void FDCAN_CalcultateRamBlockAddresses(FDCAN_HandleTypeDef *hfdcan); +static void FDCAN_CopyMessageToRAM(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData, uint32_t BufferIndex); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Functions FDCAN Exported Functions + * @{ + */ + +/** @defgroup FDCAN_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the FDCAN. + (+) De-initialize the FDCAN. + (+) Enter FDCAN peripheral in power down mode. + (+) Exit power down mode. + (+) Register callbacks. + (+) Unregister callbacks. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FDCAN peripheral according to the specified + * parameters in the FDCAN_InitTypeDef structure. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Init(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Check FDCAN handle */ + if (hfdcan == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_FDCAN_ALL_INSTANCE(hfdcan->Instance)); + if (hfdcan->Instance == FDCAN1) + { + assert_param(IS_FDCAN_CKDIV(hfdcan->Init.ClockDivider)); + } + assert_param(IS_FDCAN_FRAME_FORMAT(hfdcan->Init.FrameFormat)); + assert_param(IS_FDCAN_MODE(hfdcan->Init.Mode)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.AutoRetransmission)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.TransmitPause)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.ProtocolException)); + assert_param(IS_FDCAN_NOMINAL_PRESCALER(hfdcan->Init.NominalPrescaler)); + assert_param(IS_FDCAN_NOMINAL_SJW(hfdcan->Init.NominalSyncJumpWidth)); + assert_param(IS_FDCAN_NOMINAL_TSEG1(hfdcan->Init.NominalTimeSeg1)); + assert_param(IS_FDCAN_NOMINAL_TSEG2(hfdcan->Init.NominalTimeSeg2)); + if (hfdcan->Init.FrameFormat == FDCAN_FRAME_FD_BRS) + { + assert_param(IS_FDCAN_DATA_PRESCALER(hfdcan->Init.DataPrescaler)); + assert_param(IS_FDCAN_DATA_SJW(hfdcan->Init.DataSyncJumpWidth)); + assert_param(IS_FDCAN_DATA_TSEG1(hfdcan->Init.DataTimeSeg1)); + assert_param(IS_FDCAN_DATA_TSEG2(hfdcan->Init.DataTimeSeg2)); + } + assert_param(IS_FDCAN_MAX_VALUE(hfdcan->Init.StdFiltersNbr, SRAMCAN_FLS_NBR)); + assert_param(IS_FDCAN_MAX_VALUE(hfdcan->Init.ExtFiltersNbr, SRAMCAN_FLE_NBR)); + assert_param(IS_FDCAN_TX_FIFO_QUEUE_MODE(hfdcan->Init.TxFifoQueueMode)); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hfdcan->Lock = HAL_UNLOCKED; + + /* Reset callbacks to legacy functions */ + hfdcan->TxEventFifoCallback = HAL_FDCAN_TxEventFifoCallback; /* Legacy weak TxEventFifoCallback */ + hfdcan->RxFifo0Callback = HAL_FDCAN_RxFifo0Callback; /* Legacy weak RxFifo0Callback */ + hfdcan->RxFifo1Callback = HAL_FDCAN_RxFifo1Callback; /* Legacy weak RxFifo1Callback */ + hfdcan->TxFifoEmptyCallback = HAL_FDCAN_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + hfdcan->TxBufferCompleteCallback = HAL_FDCAN_TxBufferCompleteCallback; /* Legacy weak TxBufferCompleteCallback */ + hfdcan->TxBufferAbortCallback = HAL_FDCAN_TxBufferAbortCallback; /* Legacy weak TxBufferAbortCallback */ + hfdcan->HighPriorityMessageCallback = HAL_FDCAN_HighPriorityMessageCallback; /* Legacy weak HighPriorityMessageCallback */ + hfdcan->TimestampWraparoundCallback = HAL_FDCAN_TimestampWraparoundCallback; /* Legacy weak TimestampWraparoundCallback */ + hfdcan->TimeoutOccurredCallback = HAL_FDCAN_TimeoutOccurredCallback; /* Legacy weak TimeoutOccurredCallback */ + hfdcan->ErrorCallback = HAL_FDCAN_ErrorCallback; /* Legacy weak ErrorCallback */ + hfdcan->ErrorStatusCallback = HAL_FDCAN_ErrorStatusCallback; /* Legacy weak ErrorStatusCallback */ + + if (hfdcan->MspInitCallback == NULL) + { + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware: CLOCK, NVIC */ + hfdcan->MspInitCallback(hfdcan); + } +#else + if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hfdcan->Lock = HAL_UNLOCKED; + + /* Init the low level hardware: CLOCK, NVIC */ + HAL_FDCAN_MspInit(hfdcan); + } +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + + /* Exit from Sleep mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check Sleep mode acknowledge */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Request initialisation */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until the INIT bit into CCCR register is set */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_INIT) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Enable configuration change */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CCE); + + /* Check FDCAN instance */ + if (hfdcan->Instance == FDCAN1) + { + /* Configure Clock divider */ + FDCAN_CONFIG->CKDIV = hfdcan->Init.ClockDivider; + } + + /* Set the no automatic retransmission */ + if (hfdcan->Init.AutoRetransmission == ENABLE) + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_DAR); + } + else + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_DAR); + } + + /* Set the transmit pause feature */ + if (hfdcan->Init.TransmitPause == ENABLE) + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TXP); + } + else + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TXP); + } + + /* Set the Protocol Exception Handling */ + if (hfdcan->Init.ProtocolException == ENABLE) + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_PXHD); + } + else + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_PXHD); + } + + /* Set FDCAN Frame Format */ + MODIFY_REG(hfdcan->Instance->CCCR, FDCAN_FRAME_FD_BRS, hfdcan->Init.FrameFormat); + + /* Reset FDCAN Operation Mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, (FDCAN_CCCR_TEST | FDCAN_CCCR_MON | FDCAN_CCCR_ASM)); + CLEAR_BIT(hfdcan->Instance->TEST, FDCAN_TEST_LBCK); + + /* Set FDCAN Operating Mode: + | Normal | Restricted | Bus | Internal | External + | | Operation | Monitoring | LoopBack | LoopBack + CCCR.TEST | 0 | 0 | 0 | 1 | 1 + CCCR.MON | 0 | 0 | 1 | 1 | 0 + TEST.LBCK | 0 | 0 | 0 | 1 | 1 + CCCR.ASM | 0 | 1 | 0 | 0 | 0 + */ + if (hfdcan->Init.Mode == FDCAN_MODE_RESTRICTED_OPERATION) + { + /* Enable Restricted Operation mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_ASM); + } + else if (hfdcan->Init.Mode != FDCAN_MODE_NORMAL) + { + if (hfdcan->Init.Mode != FDCAN_MODE_BUS_MONITORING) + { + /* Enable write access to TEST register */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TEST); + + /* Enable LoopBack mode */ + SET_BIT(hfdcan->Instance->TEST, FDCAN_TEST_LBCK); + + if (hfdcan->Init.Mode == FDCAN_MODE_INTERNAL_LOOPBACK) + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_MON); + } + } + else + { + /* Enable bus monitoring mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_MON); + } + } + else + { + /* Nothing to do: normal mode */ + } + + /* Set the nominal bit timing register */ + hfdcan->Instance->NBTP = ((((uint32_t)hfdcan->Init.NominalSyncJumpWidth - 1U) << FDCAN_NBTP_NSJW_Pos) | \ + (((uint32_t)hfdcan->Init.NominalTimeSeg1 - 1U) << FDCAN_NBTP_NTSEG1_Pos) | \ + (((uint32_t)hfdcan->Init.NominalTimeSeg2 - 1U) << FDCAN_NBTP_NTSEG2_Pos) | \ + (((uint32_t)hfdcan->Init.NominalPrescaler - 1U) << FDCAN_NBTP_NBRP_Pos)); + + /* If FD operation with BRS is selected, set the data bit timing register */ + if (hfdcan->Init.FrameFormat == FDCAN_FRAME_FD_BRS) + { + hfdcan->Instance->DBTP = ((((uint32_t)hfdcan->Init.DataSyncJumpWidth - 1U) << FDCAN_DBTP_DSJW_Pos) | \ + (((uint32_t)hfdcan->Init.DataTimeSeg1 - 1U) << FDCAN_DBTP_DTSEG1_Pos) | \ + (((uint32_t)hfdcan->Init.DataTimeSeg2 - 1U) << FDCAN_DBTP_DTSEG2_Pos) | \ + (((uint32_t)hfdcan->Init.DataPrescaler - 1U) << FDCAN_DBTP_DBRP_Pos)); + } + + /* Select between Tx FIFO and Tx Queue operation modes */ + SET_BIT(hfdcan->Instance->TXBC, hfdcan->Init.TxFifoQueueMode); + + /* Calculate each RAM block address */ + FDCAN_CalcultateRamBlockAddresses(hfdcan); + + /* Initialize the Latest Tx request buffer index */ + hfdcan->LatestTxFifoQRequest = 0U; + + /* Initialize the error code */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Initialize the FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitializes the FDCAN peripheral registers to their default reset values. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DeInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Check FDCAN handle */ + if (hfdcan == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_FDCAN_ALL_INSTANCE(hfdcan->Instance)); + + /* Stop the FDCAN module: return value is voluntary ignored */ + (void)HAL_FDCAN_Stop(hfdcan); + + /* Disable Interrupt lines */ + CLEAR_BIT(hfdcan->Instance->ILE, (FDCAN_INTERRUPT_LINE0 | FDCAN_INTERRUPT_LINE1)); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + if (hfdcan->MspDeInitCallback == NULL) + { + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: CLOCK, NVIC */ + hfdcan->MspDeInitCallback(hfdcan); +#else + /* DeInit the low level hardware: CLOCK, NVIC */ + HAL_FDCAN_MspDeInit(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + + /* Reset the FDCAN ErrorCode */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_RESET; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the FDCAN MSP. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the FDCAN MSP. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Enter FDCAN peripheral in sleep mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnterPowerDownMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Request clock stop */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FDCAN is ready for power down */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == 0U) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Exit power down mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ExitPowerDownMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Reset clock stop request */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FDCAN exits sleep mode */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Enter normal operation */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Return function status */ + return HAL_OK; +} + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/** + * @brief Register a FDCAN CallBack. + * To be used instead of the weak predefined callback + * @param hfdcan pointer to a FDCAN_HandleTypeDef structure that contains + * the configuration information for FDCAN module + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_FDCAN_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty callback ID + * @arg @ref HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID High priority message callback ID + * @arg @ref HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID Timestamp wraparound callback ID + * @arg @ref HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID Timeout occurred callback ID + * @arg @ref HAL_FDCAN_ERROR_CALLBACK_CB_ID Error callback ID + * @arg @ref HAL_FDCAN_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_FDCAN_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID, void (* pCallback)(FDCAN_HandleTypeDef *_hFDCAN)) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + switch (CallbackID) + { + case HAL_FDCAN_TX_FIFO_EMPTY_CB_ID : + hfdcan->TxFifoEmptyCallback = pCallback; + break; + + case HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID : + hfdcan->HighPriorityMessageCallback = pCallback; + break; + + case HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID : + hfdcan->TimestampWraparoundCallback = pCallback; + break; + + case HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID : + hfdcan->TimeoutOccurredCallback = pCallback; + break; + + case HAL_FDCAN_ERROR_CALLBACK_CB_ID : + hfdcan->ErrorCallback = pCallback; + break; + + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = pCallback; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + switch (CallbackID) + { + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = pCallback; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a FDCAN CallBack. + * FDCAN callback is redirected to the weak predefined callback + * @param hfdcan pointer to a FDCAN_HandleTypeDef structure that contains + * the configuration information for FDCAN module + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_FDCAN_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty callback ID + * @arg @ref HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID High priority message callback ID + * @arg @ref HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID Timestamp wraparound callback ID + * @arg @ref HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID Timeout occurred callback ID + * @arg @ref HAL_FDCAN_ERROR_CALLBACK_CB_ID Error callback ID + * @arg @ref HAL_FDCAN_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_FDCAN_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + switch (CallbackID) + { + case HAL_FDCAN_TX_FIFO_EMPTY_CB_ID : + hfdcan->TxFifoEmptyCallback = HAL_FDCAN_TxFifoEmptyCallback; + break; + + case HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID : + hfdcan->HighPriorityMessageCallback = HAL_FDCAN_HighPriorityMessageCallback; + break; + + case HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID : + hfdcan->TimestampWraparoundCallback = HAL_FDCAN_TimestampWraparoundCallback; + break; + + case HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID : + hfdcan->TimeoutOccurredCallback = HAL_FDCAN_TimeoutOccurredCallback; + break; + + case HAL_FDCAN_ERROR_CALLBACK_CB_ID : + hfdcan->ErrorCallback = HAL_FDCAN_ErrorCallback; + break; + + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + switch (CallbackID) + { + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Event Fifo FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxEventFifoCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Event Fifo Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxEventFifoCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxEventFifoCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Event Fifo FDCAN Callback + * Tx Event Fifo FDCAN Callback is redirected to the weak HAL_FDCAN_TxEventFifoCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxEventFifoCallback = HAL_FDCAN_TxEventFifoCallback; /* Legacy weak TxEventFifoCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Rx Fifo 0 FDCAN Callback + * To be used instead of the weak HAL_FDCAN_RxFifo0Callback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Rx Fifo 0 Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo0CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo0Callback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Rx Fifo 0 FDCAN Callback + * Rx Fifo 0 FDCAN Callback is redirected to the weak HAL_FDCAN_RxFifo0Callback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo0Callback = HAL_FDCAN_RxFifo0Callback; /* Legacy weak RxFifo0Callback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Rx Fifo 1 FDCAN Callback + * To be used instead of the weak HAL_FDCAN_RxFifo1Callback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Rx Fifo 1 Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_RxFifo1CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo1Callback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Rx Fifo 1 FDCAN Callback + * Rx Fifo 1 FDCAN Callback is redirected to the weak HAL_FDCAN_RxFifo1Callback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo1Callback = HAL_FDCAN_RxFifo1Callback; /* Legacy weak RxFifo1Callback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Buffer Complete FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxBufferCompleteCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Buffer Complete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferCompleteCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferCompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Buffer Complete FDCAN Callback + * Tx Buffer Complete FDCAN Callback is redirected to the weak HAL_FDCAN_TxBufferCompleteCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferCompleteCallback = HAL_FDCAN_TxBufferCompleteCallback; /* Legacy weak TxBufferCompleteCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Buffer Abort FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxBufferAbortCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Buffer Abort Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_TxBufferAbortCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferAbortCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Buffer Abort FDCAN Callback + * Tx Buffer Abort FDCAN Callback is redirected to the weak HAL_FDCAN_TxBufferAbortCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferAbortCallback = HAL_FDCAN_TxBufferAbortCallback; /* Legacy weak TxBufferAbortCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Error Status FDCAN Callback + * To be used instead of the weak HAL_FDCAN_ErrorStatusCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Error Status Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, pFDCAN_ErrorStatusCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->ErrorStatusCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Error Status FDCAN Callback + * Error Status FDCAN Callback is redirected to the weak HAL_FDCAN_ErrorStatusCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->ErrorStatusCallback = HAL_FDCAN_ErrorStatusCallback; /* Legacy weak ErrorStatusCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group2 Configuration functions + * @brief FDCAN Configuration functions. + * +@verbatim + ============================================================================== + ##### Configuration functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_ConfigFilter : Configure the FDCAN reception filters + (+) HAL_FDCAN_ConfigGlobalFilter : Configure the FDCAN global filter + (+) HAL_FDCAN_ConfigExtendedIdMask : Configure the extended ID mask + (+) HAL_FDCAN_ConfigRxFifoOverwrite : Configure the Rx FIFO operation mode + (+) HAL_FDCAN_ConfigRamWatchdog : Configure the RAM watchdog + (+) HAL_FDCAN_ConfigTimestampCounter : Configure the timestamp counter + (+) HAL_FDCAN_EnableTimestampCounter : Enable the timestamp counter + (+) HAL_FDCAN_DisableTimestampCounter : Disable the timestamp counter + (+) HAL_FDCAN_GetTimestampCounter : Get the timestamp counter value + (+) HAL_FDCAN_ResetTimestampCounter : Reset the timestamp counter to zero + (+) HAL_FDCAN_ConfigTimeoutCounter : Configure the timeout counter + (+) HAL_FDCAN_EnableTimeoutCounter : Enable the timeout counter + (+) HAL_FDCAN_DisableTimeoutCounter : Disable the timeout counter + (+) HAL_FDCAN_GetTimeoutCounter : Get the timeout counter value + (+) HAL_FDCAN_ResetTimeoutCounter : Reset the timeout counter to its start value + (+) HAL_FDCAN_ConfigTxDelayCompensation : Configure the transmitter delay compensation + (+) HAL_FDCAN_EnableTxDelayCompensation : Enable the transmitter delay compensation + (+) HAL_FDCAN_DisableTxDelayCompensation : Disable the transmitter delay compensation + (+) HAL_FDCAN_EnableISOMode : Enable ISO 11898-1 protocol mode + (+) HAL_FDCAN_DisableISOMode : Disable ISO 11898-1 protocol mode + (+) HAL_FDCAN_EnableEdgeFiltering : Enable edge filtering during bus integration + (+) HAL_FDCAN_DisableEdgeFiltering : Disable edge filtering during bus integration + +@endverbatim + * @{ + */ + +/** + * @brief Configure the FDCAN reception filter according to the specified + * parameters in the FDCAN_FilterTypeDef structure. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param sFilterConfig pointer to an FDCAN_FilterTypeDef structure that + * contains the filter configuration information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigFilter(FDCAN_HandleTypeDef *hfdcan, FDCAN_FilterTypeDef *sFilterConfig) +{ + uint32_t FilterElementW1; + uint32_t FilterElementW2; + uint32_t *FilterAddress; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Check function parameters */ + assert_param(IS_FDCAN_ID_TYPE(sFilterConfig->IdType)); + assert_param(IS_FDCAN_FILTER_CFG(sFilterConfig->FilterConfig)); + + if (sFilterConfig->IdType == FDCAN_STANDARD_ID) + { + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterIndex, (hfdcan->Init.StdFiltersNbr - 1U))); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID1, 0x7FFU)); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID2, 0x7FFU)); + assert_param(IS_FDCAN_STD_FILTER_TYPE(sFilterConfig->FilterType)); + + /* Build filter element */ + FilterElementW1 = ((sFilterConfig->FilterType << 30U) | + (sFilterConfig->FilterConfig << 27U) | + (sFilterConfig->FilterID1 << 16U) | + sFilterConfig->FilterID2); + + /* Calculate filter address */ + FilterAddress = (uint32_t *)(hfdcan->msgRam.StandardFilterSA + (sFilterConfig->FilterIndex * SRAMCAN_FLS_SIZE)); + + /* Write filter element to the message RAM */ + *FilterAddress = FilterElementW1; + } + else /* sFilterConfig->IdType == FDCAN_EXTENDED_ID */ + { + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterIndex, (hfdcan->Init.ExtFiltersNbr - 1U))); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID1, 0x1FFFFFFFU)); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID2, 0x1FFFFFFFU)); + assert_param(IS_FDCAN_EXT_FILTER_TYPE(sFilterConfig->FilterType)); + + /* Build first word of filter element */ + FilterElementW1 = ((sFilterConfig->FilterConfig << 29U) | sFilterConfig->FilterID1); + + /* Build second word of filter element */ + FilterElementW2 = ((sFilterConfig->FilterType << 30U) | sFilterConfig->FilterID2); + + /* Calculate filter address */ + FilterAddress = (uint32_t *)(hfdcan->msgRam.ExtendedFilterSA + (sFilterConfig->FilterIndex * SRAMCAN_FLE_SIZE)); + + /* Write filter element to the message RAM */ + *FilterAddress = FilterElementW1; + FilterAddress++; + *FilterAddress = FilterElementW2; + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the FDCAN global filter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param NonMatchingStd Defines how received messages with 11-bit IDs that + * do not match any element of the filter list are treated. + * This parameter can be a value of @arg FDCAN_Non_Matching_Frames. + * @param NonMatchingExt Defines how received messages with 29-bit IDs that + * do not match any element of the filter list are treated. + * This parameter can be a value of @arg FDCAN_Non_Matching_Frames. + * @param RejectRemoteStd Filter or reject all the remote 11-bit IDs frames. + * This parameter can be a value of @arg FDCAN_Reject_Remote_Frames. + * @param RejectRemoteExt Filter or reject all the remote 29-bit IDs frames. + * This parameter can be a value of @arg FDCAN_Reject_Remote_Frames. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigGlobalFilter(FDCAN_HandleTypeDef *hfdcan, + uint32_t NonMatchingStd, + uint32_t NonMatchingExt, + uint32_t RejectRemoteStd, + uint32_t RejectRemoteExt) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_NON_MATCHING(NonMatchingStd)); + assert_param(IS_FDCAN_NON_MATCHING(NonMatchingExt)); + assert_param(IS_FDCAN_REJECT_REMOTE(RejectRemoteStd)); + assert_param(IS_FDCAN_REJECT_REMOTE(RejectRemoteExt)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure global filter */ + MODIFY_REG(hfdcan->Instance->RXGFC, (FDCAN_RXGFC_ANFS | + FDCAN_RXGFC_ANFE | + FDCAN_RXGFC_RRFS | + FDCAN_RXGFC_RRFE), + ((NonMatchingStd << FDCAN_RXGFC_ANFS_Pos) | + (NonMatchingExt << FDCAN_RXGFC_ANFE_Pos) | + (RejectRemoteStd << FDCAN_RXGFC_RRFS_Pos) | + (RejectRemoteExt << FDCAN_RXGFC_RRFE_Pos))); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the extended ID mask. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param Mask Extended ID Mask. + This parameter must be a number between 0 and 0x1FFFFFFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigExtendedIdMask(FDCAN_HandleTypeDef *hfdcan, uint32_t Mask) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(Mask, 0x1FFFFFFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure the extended ID mask */ + hfdcan->Instance->XIDAM = Mask; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the Rx FIFO operation mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo Rx FIFO. + * This parameter can be one of the following values: + * @arg FDCAN_RX_FIFO0: Rx FIFO 0 + * @arg FDCAN_RX_FIFO1: Rx FIFO 1 + * @param OperationMode operation mode. + * This parameter can be a value of @arg FDCAN_Rx_FIFO_operation_mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigRxFifoOverwrite(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo, uint32_t OperationMode) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxFifo)); + assert_param(IS_FDCAN_RX_FIFO_MODE(OperationMode)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + if (RxFifo == FDCAN_RX_FIFO0) + { + /* Select FIFO 0 Operation Mode */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_F0OM, (OperationMode << FDCAN_RXGFC_F0OM_Pos)); + } + else /* RxFifo == FDCAN_RX_FIFO1 */ + { + /* Select FIFO 1 Operation Mode */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_F1OM, (OperationMode << FDCAN_RXGFC_F1OM_Pos)); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the RAM watchdog. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param CounterStartValue Start value of the Message RAM Watchdog Counter, + * This parameter must be a number between 0x00 and 0xFF, + * with the reset value of 0x00 the counter is disabled. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigRamWatchdog(FDCAN_HandleTypeDef *hfdcan, uint32_t CounterStartValue) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(CounterStartValue, 0xFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure the RAM watchdog counter start value */ + MODIFY_REG(hfdcan->Instance->RWD, FDCAN_RWD_WDC, CounterStartValue); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimestampPrescaler Timestamp Counter Prescaler. + * This parameter can be a value of @arg FDCAN_Timestamp_Prescaler. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampPrescaler) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMESTAMP_PRESCALER(TimestampPrescaler)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure prescaler */ + MODIFY_REG(hfdcan->Instance->TSCC, FDCAN_TSCC_TCP, TimestampPrescaler); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimestampOperation Timestamp counter operation. + * This parameter can be a value of @arg FDCAN_Timestamp. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampOperation) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMESTAMP(TimestampOperation)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable timestamp counter */ + MODIFY_REG(hfdcan->Instance->TSCC, FDCAN_TSCC_TSS, TimestampOperation); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable timestamp counter */ + CLEAR_BIT(hfdcan->Instance->TSCC, FDCAN_TSCC_TSS); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Get the timestamp counter value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Timestamp counter value + */ +uint16_t HAL_FDCAN_GetTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + return (uint16_t)(hfdcan->Instance->TSCV); +} + +/** + * @brief Reset the timestamp counter to zero. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ResetTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if ((hfdcan->Instance->TSCC & FDCAN_TSCC_TSS) != FDCAN_TIMESTAMP_EXTERNAL) + { + /* Reset timestamp counter. + Actually any write operation to TSCV clears the counter */ + CLEAR_REG(hfdcan->Instance->TSCV); + } + else + { + /* Update error code. + Unable to reset external counter */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_SUPPORTED; + + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimeoutOperation Timeout counter operation. + * This parameter can be a value of @arg FDCAN_Timeout_Operation. + * @param TimeoutPeriod Start value of the timeout down-counter. + * This parameter must be a number between 0x0000 and 0xFFFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTimeoutCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimeoutOperation, uint32_t TimeoutPeriod) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMEOUT(TimeoutOperation)); + assert_param(IS_FDCAN_MAX_VALUE(TimeoutPeriod, 0xFFFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Select timeout operation and configure period */ + MODIFY_REG(hfdcan->Instance->TOCC, (FDCAN_TOCC_TOS | FDCAN_TOCC_TOP), (TimeoutOperation | (TimeoutPeriod << FDCAN_TOCC_TOP_Pos))); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable timeout counter */ + SET_BIT(hfdcan->Instance->TOCC, FDCAN_TOCC_ETOC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable timeout counter */ + CLEAR_BIT(hfdcan->Instance->TOCC, FDCAN_TOCC_ETOC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Get the timeout counter value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Timeout counter value + */ +uint16_t HAL_FDCAN_GetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + return (uint16_t)(hfdcan->Instance->TOCV); +} + +/** + * @brief Reset the timeout counter to its start value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ResetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if ((hfdcan->Instance->TOCC & FDCAN_TOCC_TOS) == FDCAN_TIMEOUT_CONTINUOUS) + { + /* Reset timeout counter to start value */ + CLEAR_REG(hfdcan->Instance->TOCV); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code. + Unable to reset counter: controlled only by FIFO empty state */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_SUPPORTED; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TdcOffset Transmitter Delay Compensation Offset. + * This parameter must be a number between 0x00 and 0x7F. + * @param TdcFilter Transmitter Delay Compensation Filter Window Length. + * This parameter must be a number between 0x00 and 0x7F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan, uint32_t TdcOffset, uint32_t TdcFilter) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(TdcOffset, 0x7FU)); + assert_param(IS_FDCAN_MAX_VALUE(TdcFilter, 0x7FU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure TDC offset and filter window */ + hfdcan->Instance->TDCR = ((TdcFilter << FDCAN_TDCR_TDCF_Pos) | (TdcOffset << FDCAN_TDCR_TDCO_Pos)); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable transmitter delay compensation */ + SET_BIT(hfdcan->Instance->DBTP, FDCAN_DBTP_TDC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable transmitter delay compensation */ + CLEAR_BIT(hfdcan->Instance->DBTP, FDCAN_DBTP_TDC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable ISO 11898-1 protocol mode. + * CAN FD frame format is according to ISO 11898-1 standard. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableISOMode(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable Non ISO protocol mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_NISO); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable ISO 11898-1 protocol mode. + * CAN FD frame format is according to Bosch CAN FD specification V1.0. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableISOMode(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable Non ISO protocol mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_NISO); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable edge filtering during bus integration. + * Two consecutive dominant tq are required to detect an edge for hard synchronization. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable edge filtering */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_EFBI); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable edge filtering during bus integration. + * One dominant tq is required to detect an edge for hard synchronization. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable edge filtering */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_EFBI); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group3 Control functions + * @brief Control functions + * +@verbatim + ============================================================================== + ##### Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_Start : Start the FDCAN module + (+) HAL_FDCAN_Stop : Stop the FDCAN module and enable access to configuration registers + (+) HAL_FDCAN_AddMessageToTxFifoQ : Add a message to the Tx FIFO/Queue and activate the corresponding transmission request + (+) HAL_FDCAN_GetLatestTxFifoQRequestBuffer : Get Tx buffer index of latest Tx FIFO/Queue request + (+) HAL_FDCAN_AbortTxRequest : Abort transmission request + (+) HAL_FDCAN_GetRxMessage : Get an FDCAN frame from the Rx FIFO zone into the message RAM + (+) HAL_FDCAN_GetTxEvent : Get an FDCAN Tx event from the Tx Event FIFO zone into the message RAM + (+) HAL_FDCAN_GetHighPriorityMessageStatus : Get high priority message status + (+) HAL_FDCAN_GetProtocolStatus : Get protocol status + (+) HAL_FDCAN_GetErrorCounters : Get error counter values + (+) HAL_FDCAN_IsTxBufferMessagePending : Check if a transmission request is pending on the selected Tx buffer + (+) HAL_FDCAN_GetRxFifoFillLevel : Return Rx FIFO fill level + (+) HAL_FDCAN_GetTxFifoFreeLevel : Return Tx FIFO free level + (+) HAL_FDCAN_IsRestrictedOperationMode : Check if the FDCAN peripheral entered Restricted Operation Mode + (+) HAL_FDCAN_ExitRestrictedOperationMode : Exit Restricted Operation Mode + +@endverbatim + * @{ + */ + +/** + * @brief Start the FDCAN module. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Start(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Change FDCAN peripheral state */ + hfdcan->State = HAL_FDCAN_STATE_BUSY; + + /* Request leave initialisation */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Reset the FDCAN ErrorCode */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Stop the FDCAN module and enable access to configuration registers. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Stop(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t Counter = 0U; + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Request initialisation */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Wait until the INIT bit into CCCR register is set */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_INIT) == 0U) + { + /* Check for the Timeout */ + if (Counter > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + + /* Increment counter */ + Counter++; + } + + /* Reset counter */ + Counter = 0U; + + /* Exit from Sleep mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Wait until FDCAN exits sleep mode */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + /* Check for the Timeout */ + if (Counter > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + + /* Increment counter */ + Counter++; + } + + /* Enable configuration change */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CCE); + + /* Reset Latest Tx FIFO/Queue Request Buffer Index */ + hfdcan->LatestTxFifoQRequest = 0U; + + /* Change FDCAN peripheral state */ + hfdcan->State = HAL_FDCAN_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Add a message to the Tx FIFO/Queue and activate the corresponding transmission request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxHeader pointer to a FDCAN_TxHeaderTypeDef structure. + * @param pTxData pointer to a buffer containing the payload of the Tx frame. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_AddMessageToTxFifoQ(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData) +{ + uint32_t PutIndex; + + /* Check function parameters */ + assert_param(IS_FDCAN_ID_TYPE(pTxHeader->IdType)); + if (pTxHeader->IdType == FDCAN_STANDARD_ID) + { + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->Identifier, 0x7FFU)); + } + else /* pTxHeader->IdType == FDCAN_EXTENDED_ID */ + { + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->Identifier, 0x1FFFFFFFU)); + } + assert_param(IS_FDCAN_FRAME_TYPE(pTxHeader->TxFrameType)); + assert_param(IS_FDCAN_DLC(pTxHeader->DataLength)); + assert_param(IS_FDCAN_ESI(pTxHeader->ErrorStateIndicator)); + assert_param(IS_FDCAN_BRS(pTxHeader->BitRateSwitch)); + assert_param(IS_FDCAN_FDF(pTxHeader->FDFormat)); + assert_param(IS_FDCAN_EFC(pTxHeader->TxEventFifoControl)); + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->MessageMarker, 0xFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Check that the Tx FIFO/Queue is not full */ + if ((hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFQF) != 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_FULL; + + return HAL_ERROR; + } + else + { + /* Retrieve the Tx FIFO PutIndex */ + PutIndex = ((hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFQPI) >> FDCAN_TXFQS_TFQPI_Pos); + + /* Add the message to the Tx FIFO/Queue */ + FDCAN_CopyMessageToRAM(hfdcan, pTxHeader, pTxData, PutIndex); + + /* Activate the corresponding transmission request */ + hfdcan->Instance->TXBAR = ((uint32_t)1 << PutIndex); + + /* Store the Latest Tx FIFO/Queue Request Buffer Index */ + hfdcan->LatestTxFifoQRequest = ((uint32_t)1 << PutIndex); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get Tx buffer index of latest Tx FIFO/Queue request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Tx buffer index of last Tx FIFO/Queue request + * - Any value of @arg FDCAN_Tx_location if Tx request has been submitted. + * - 0 if no Tx FIFO/Queue request have been submitted. + */ +uint32_t HAL_FDCAN_GetLatestTxFifoQRequestBuffer(FDCAN_HandleTypeDef *hfdcan) +{ + /* Return Last Tx FIFO/Queue Request Buffer */ + return hfdcan->LatestTxFifoQRequest; +} + +/** + * @brief Abort transmission request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndex buffer index. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_AbortTxRequest(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndex) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TX_LOCATION_LIST(BufferIndex)); + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Add cancellation request */ + hfdcan->Instance->TXBCR = BufferIndex; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get an FDCAN frame from the Rx FIFO zone into the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxLocation Location of the received message to be read. + * This parameter can be a value of @arg FDCAN_Rx_location. + * @param pRxHeader pointer to a FDCAN_RxHeaderTypeDef structure. + * @param pRxData pointer to a buffer where the payload of the Rx frame will be stored. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetRxMessage(FDCAN_HandleTypeDef *hfdcan, uint32_t RxLocation, FDCAN_RxHeaderTypeDef *pRxHeader, uint8_t *pRxData) +{ + uint32_t *RxAddress; + uint8_t *pData; + uint32_t ByteCounter; + uint32_t GetIndex; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxLocation)); + + if (state == HAL_FDCAN_STATE_BUSY) + { + if (RxLocation == FDCAN_RX_FIFO0) /* Rx element is assigned to the Rx FIFO 0 */ + { + /* Check that the Rx FIFO 0 is not empty */ + if ((hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0FL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + else + { + /* Calculate Rx FIFO 0 element address */ + GetIndex = ((hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0GI) >> FDCAN_RXF0S_F0GI_Pos); + RxAddress = (uint32_t *)(hfdcan->msgRam.RxFIFO0SA + (GetIndex * SRAMCAN_RF0_SIZE)); + } + } + else /* Rx element is assigned to the Rx FIFO 1 */ + { + /* Check that the Rx FIFO 1 is not empty */ + if ((hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1FL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + else + { + /* Calculate Rx FIFO 1 element address */ + GetIndex = ((hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1GI) >> FDCAN_RXF1S_F1GI_Pos); + RxAddress = (uint32_t *)(hfdcan->msgRam.RxFIFO1SA + (GetIndex * SRAMCAN_RF1_SIZE)); + } + } + + /* Retrieve IdType */ + pRxHeader->IdType = *RxAddress & FDCAN_ELEMENT_MASK_XTD; + + /* Retrieve Identifier */ + if (pRxHeader->IdType == FDCAN_STANDARD_ID) /* Standard ID element */ + { + pRxHeader->Identifier = ((*RxAddress & FDCAN_ELEMENT_MASK_STDID) >> 18U); + } + else /* Extended ID element */ + { + pRxHeader->Identifier = (*RxAddress & FDCAN_ELEMENT_MASK_EXTID); + } + + /* Retrieve RxFrameType */ + pRxHeader->RxFrameType = (*RxAddress & FDCAN_ELEMENT_MASK_RTR); + + /* Retrieve ErrorStateIndicator */ + pRxHeader->ErrorStateIndicator = (*RxAddress & FDCAN_ELEMENT_MASK_ESI); + + /* Increment RxAddress pointer to second word of Rx FIFO element */ + RxAddress++; + + /* Retrieve RxTimestamp */ + pRxHeader->RxTimestamp = (*RxAddress & FDCAN_ELEMENT_MASK_TS); + + /* Retrieve DataLength */ + pRxHeader->DataLength = (*RxAddress & FDCAN_ELEMENT_MASK_DLC); + + /* Retrieve BitRateSwitch */ + pRxHeader->BitRateSwitch = (*RxAddress & FDCAN_ELEMENT_MASK_BRS); + + /* Retrieve FDFormat */ + pRxHeader->FDFormat = (*RxAddress & FDCAN_ELEMENT_MASK_FDF); + + /* Retrieve FilterIndex */ + pRxHeader->FilterIndex = ((*RxAddress & FDCAN_ELEMENT_MASK_FIDX) >> 24U); + + /* Retrieve NonMatchingFrame */ + pRxHeader->IsFilterMatchingFrame = ((*RxAddress & FDCAN_ELEMENT_MASK_ANMF) >> 31U); + + /* Increment RxAddress pointer to payload of Rx FIFO element */ + RxAddress++; + + /* Retrieve Rx payload */ + pData = (uint8_t *)RxAddress; + for (ByteCounter = 0; ByteCounter < DLCtoBytes[pRxHeader->DataLength >> 16U]; ByteCounter++) + { + pRxData[ByteCounter] = pData[ByteCounter]; + } + + if (RxLocation == FDCAN_RX_FIFO0) /* Rx element is assigned to the Rx FIFO 0 */ + { + /* Acknowledge the Rx FIFO 0 that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->RXF0A = GetIndex; + } + else /* Rx element is assigned to the Rx FIFO 1 */ + { + /* Acknowledge the Rx FIFO 1 that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->RXF1A = GetIndex; + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get an FDCAN Tx event from the Tx Event FIFO zone into the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxEvent pointer to a FDCAN_TxEventFifoTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetTxEvent(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxEventFifoTypeDef *pTxEvent) +{ + uint32_t *TxEventAddress; + uint32_t GetIndex; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if (state == HAL_FDCAN_STATE_BUSY) + { + /* Check that the Tx event FIFO is not empty */ + if ((hfdcan->Instance->TXEFS & FDCAN_TXEFS_EFFL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + + /* Calculate Tx event FIFO element address */ + GetIndex = ((hfdcan->Instance->TXEFS & FDCAN_TXEFS_EFGI) >> FDCAN_TXEFS_EFGI_Pos); + TxEventAddress = (uint32_t *)(hfdcan->msgRam.TxEventFIFOSA + (GetIndex * SRAMCAN_TEF_SIZE)); + + /* Retrieve IdType */ + pTxEvent->IdType = *TxEventAddress & FDCAN_ELEMENT_MASK_XTD; + + /* Retrieve Identifier */ + if (pTxEvent->IdType == FDCAN_STANDARD_ID) /* Standard ID element */ + { + pTxEvent->Identifier = ((*TxEventAddress & FDCAN_ELEMENT_MASK_STDID) >> 18U); + } + else /* Extended ID element */ + { + pTxEvent->Identifier = (*TxEventAddress & FDCAN_ELEMENT_MASK_EXTID); + } + + /* Retrieve TxFrameType */ + pTxEvent->TxFrameType = (*TxEventAddress & FDCAN_ELEMENT_MASK_RTR); + + /* Retrieve ErrorStateIndicator */ + pTxEvent->ErrorStateIndicator = (*TxEventAddress & FDCAN_ELEMENT_MASK_ESI); + + /* Increment TxEventAddress pointer to second word of Tx Event FIFO element */ + TxEventAddress++; + + /* Retrieve TxTimestamp */ + pTxEvent->TxTimestamp = (*TxEventAddress & FDCAN_ELEMENT_MASK_TS); + + /* Retrieve DataLength */ + pTxEvent->DataLength = (*TxEventAddress & FDCAN_ELEMENT_MASK_DLC); + + /* Retrieve BitRateSwitch */ + pTxEvent->BitRateSwitch = (*TxEventAddress & FDCAN_ELEMENT_MASK_BRS); + + /* Retrieve FDFormat */ + pTxEvent->FDFormat = (*TxEventAddress & FDCAN_ELEMENT_MASK_FDF); + + /* Retrieve EventType */ + pTxEvent->EventType = (*TxEventAddress & FDCAN_ELEMENT_MASK_ET); + + /* Retrieve MessageMarker */ + pTxEvent->MessageMarker = ((*TxEventAddress & FDCAN_ELEMENT_MASK_MM) >> 24U); + + /* Acknowledge the Tx Event FIFO that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->TXEFA = GetIndex; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get high priority message status. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param HpMsgStatus pointer to an FDCAN_HpMsgStatusTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetHighPriorityMessageStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_HpMsgStatusTypeDef *HpMsgStatus) +{ + HpMsgStatus->FilterList = ((hfdcan->Instance->HPMS & FDCAN_HPMS_FLST) >> FDCAN_HPMS_FLST_Pos); + HpMsgStatus->FilterIndex = ((hfdcan->Instance->HPMS & FDCAN_HPMS_FIDX) >> FDCAN_HPMS_FIDX_Pos); + HpMsgStatus->MessageStorage = (hfdcan->Instance->HPMS & FDCAN_HPMS_MSI); + HpMsgStatus->MessageIndex = (hfdcan->Instance->HPMS & FDCAN_HPMS_BIDX); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get protocol status. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ProtocolStatus pointer to an FDCAN_ProtocolStatusTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetProtocolStatus(FDCAN_HandleTypeDef *hfdcan, FDCAN_ProtocolStatusTypeDef *ProtocolStatus) +{ + uint32_t StatusReg; + + /* Read the protocol status register */ + StatusReg = READ_REG(hfdcan->Instance->PSR); + + /* Fill the protocol status structure */ + ProtocolStatus->LastErrorCode = (StatusReg & FDCAN_PSR_LEC); + ProtocolStatus->DataLastErrorCode = ((StatusReg & FDCAN_PSR_DLEC) >> FDCAN_PSR_DLEC_Pos); + ProtocolStatus->Activity = (StatusReg & FDCAN_PSR_ACT); + ProtocolStatus->ErrorPassive = ((StatusReg & FDCAN_PSR_EP) >> FDCAN_PSR_EP_Pos); + ProtocolStatus->Warning = ((StatusReg & FDCAN_PSR_EW) >> FDCAN_PSR_EW_Pos); + ProtocolStatus->BusOff = ((StatusReg & FDCAN_PSR_BO) >> FDCAN_PSR_BO_Pos); + ProtocolStatus->RxESIflag = ((StatusReg & FDCAN_PSR_RESI) >> FDCAN_PSR_RESI_Pos); + ProtocolStatus->RxBRSflag = ((StatusReg & FDCAN_PSR_RBRS) >> FDCAN_PSR_RBRS_Pos); + ProtocolStatus->RxFDFflag = ((StatusReg & FDCAN_PSR_REDL) >> FDCAN_PSR_REDL_Pos); + ProtocolStatus->ProtocolException = ((StatusReg & FDCAN_PSR_PXE) >> FDCAN_PSR_PXE_Pos); + ProtocolStatus->TDCvalue = ((StatusReg & FDCAN_PSR_TDCV) >> FDCAN_PSR_TDCV_Pos); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get error counter values. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ErrorCounters pointer to an FDCAN_ErrorCountersTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetErrorCounters(FDCAN_HandleTypeDef *hfdcan, FDCAN_ErrorCountersTypeDef *ErrorCounters) +{ + uint32_t CountersReg; + + /* Read the error counters register */ + CountersReg = READ_REG(hfdcan->Instance->ECR); + + /* Fill the error counters structure */ + ErrorCounters->TxErrorCnt = ((CountersReg & FDCAN_ECR_TEC) >> FDCAN_ECR_TEC_Pos); + ErrorCounters->RxErrorCnt = ((CountersReg & FDCAN_ECR_REC) >> FDCAN_ECR_REC_Pos); + ErrorCounters->RxErrorPassive = ((CountersReg & FDCAN_ECR_RP) >> FDCAN_ECR_RP_Pos); + ErrorCounters->ErrorLogging = ((CountersReg & FDCAN_ECR_CEL) >> FDCAN_ECR_CEL_Pos); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Check if a transmission request is pending on the selected Tx buffer. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TxBufferIndex Tx buffer index. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval Status + * - 0 : No pending transmission request on TxBufferIndex list + * - 1 : Pending transmission request on TxBufferIndex. + */ +uint32_t HAL_FDCAN_IsTxBufferMessagePending(FDCAN_HandleTypeDef *hfdcan, uint32_t TxBufferIndex) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TX_LOCATION_LIST(TxBufferIndex)); + + /* Check pending transmission request on the selected buffer */ + if ((hfdcan->Instance->TXBRP & TxBufferIndex) == 0U) + { + return 0; + } + return 1; +} + +/** + * @brief Return Rx FIFO fill level. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo Rx FIFO. + * This parameter can be one of the following values: + * @arg FDCAN_RX_FIFO0: Rx FIFO 0 + * @arg FDCAN_RX_FIFO1: Rx FIFO 1 + * @retval Rx FIFO fill level. + */ +uint32_t HAL_FDCAN_GetRxFifoFillLevel(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo) +{ + uint32_t FillLevel; + + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxFifo)); + + if (RxFifo == FDCAN_RX_FIFO0) + { + FillLevel = hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0FL; + } + else /* RxFifo == FDCAN_RX_FIFO1 */ + { + FillLevel = hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1FL; + } + + /* Return Rx FIFO fill level */ + return FillLevel; +} + +/** + * @brief Return Tx FIFO free level: number of consecutive free Tx FIFO + * elements starting from Tx FIFO GetIndex. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Tx FIFO free level. + */ +uint32_t HAL_FDCAN_GetTxFifoFreeLevel(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t FreeLevel; + + FreeLevel = hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFFL; + + /* Return Tx FIFO free level */ + return FreeLevel; +} + +/** + * @brief Check if the FDCAN peripheral entered Restricted Operation Mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Status + * - 0 : Normal FDCAN operation. + * - 1 : Restricted Operation Mode active. + */ +uint32_t HAL_FDCAN_IsRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t OperationMode; + + /* Get Operation Mode */ + OperationMode = ((hfdcan->Instance->CCCR & FDCAN_CCCR_ASM) >> FDCAN_CCCR_ASM_Pos); + + return OperationMode; +} + +/** + * @brief Exit Restricted Operation Mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ExitRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Exit Restricted Operation mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_ASM); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group4 Interrupts management + * @brief Interrupts management + * +@verbatim + ============================================================================== + ##### Interrupts management ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_ConfigInterruptLines : Assign interrupts to either Interrupt line 0 or 1 + (+) HAL_FDCAN_ActivateNotification : Enable interrupts + (+) HAL_FDCAN_DeactivateNotification : Disable interrupts + (+) HAL_FDCAN_IRQHandler : Handles FDCAN interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Assign interrupts to either Interrupt line 0 or 1. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ITList indicates which interrupts group will be assigned to the selected interrupt line. + * This parameter can be any combination of @arg FDCAN_Interrupts_Group. + * @param InterruptLine Interrupt line. + * This parameter can be a value of @arg FDCAN_Interrupt_Line. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigInterruptLines(FDCAN_HandleTypeDef *hfdcan, uint32_t ITList, uint32_t InterruptLine) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT_GROUP(ITList)); + assert_param(IS_FDCAN_IT_LINE(InterruptLine)); + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Assign list of interrupts to the selected line */ + if (InterruptLine == FDCAN_INTERRUPT_LINE0) + { + CLEAR_BIT(hfdcan->Instance->ILS, ITList); + } + else /* InterruptLine == FDCAN_INTERRUPT_LINE1 */ + { + SET_BIT(hfdcan->Instance->ILS, ITList); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Enable interrupts. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ActiveITs indicates which interrupts will be enabled. + * This parameter can be any combination of @arg FDCAN_Interrupts. + * @param BufferIndexes Tx Buffer Indexes. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * This parameter is ignored if ActiveITs does not include one of the following: + * - FDCAN_IT_TX_COMPLETE + * - FDCAN_IT_TX_ABORT_COMPLETE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ActivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t ActiveITs, uint32_t BufferIndexes) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + uint32_t ITs_lines_selection; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT(ActiveITs)); + if ((ActiveITs & (FDCAN_IT_TX_COMPLETE | FDCAN_IT_TX_ABORT_COMPLETE)) != 0U) + { + assert_param(IS_FDCAN_TX_LOCATION_LIST(BufferIndexes)); + } + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Get interrupts line selection */ + ITs_lines_selection = hfdcan->Instance->ILS; + + /* Enable Interrupt lines */ + if ((((ActiveITs & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) == 0U))) + { + /* Enable Interrupt line 0 */ + SET_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE0); + } + if ((((ActiveITs & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) != 0U))) + { + /* Enable Interrupt line 1 */ + SET_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE1); + } + + if ((ActiveITs & FDCAN_IT_TX_COMPLETE) != 0U) + { + /* Enable Tx Buffer Transmission Interrupt to set TC flag in IR register, + but interrupt will only occur if TC is enabled in IE register */ + SET_BIT(hfdcan->Instance->TXBTIE, BufferIndexes); + } + + if ((ActiveITs & FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* Enable Tx Buffer Cancellation Finished Interrupt to set TCF flag in IR register, + but interrupt will only occur if TCF is enabled in IE register */ + SET_BIT(hfdcan->Instance->TXBCIE, BufferIndexes); + } + + /* Enable the selected interrupts */ + __HAL_FDCAN_ENABLE_IT(hfdcan, ActiveITs); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Disable interrupts. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param InactiveITs indicates which interrupts will be disabled. + * This parameter can be any combination of @arg FDCAN_Interrupts. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DeactivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t InactiveITs) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + uint32_t ITs_enabled; + uint32_t ITs_lines_selection; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT(InactiveITs)); + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Disable the selected interrupts */ + __HAL_FDCAN_DISABLE_IT(hfdcan, InactiveITs); + + if ((InactiveITs & FDCAN_IT_TX_COMPLETE) != 0U) + { + /* Disable Tx Buffer Transmission Interrupts */ + CLEAR_REG(hfdcan->Instance->TXBTIE); + } + + if ((InactiveITs & FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* Disable Tx Buffer Cancellation Finished Interrupt */ + CLEAR_REG(hfdcan->Instance->TXBCIE); + } + + /* Get interrupts enabled and interrupts line selection */ + ITs_enabled = hfdcan->Instance->IE; + ITs_lines_selection = hfdcan->Instance->ILS; + + /* Check if some interrupts are still enabled on interrupt line 0 */ + if ((((ITs_enabled & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) == 0U))) + { + /* Do nothing */ + } + else /* no more interrupts enabled on interrupt line 0 */ + { + /* Disable interrupt line 0 */ + CLEAR_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE0); + } + + /* Check if some interrupts are still enabled on interrupt line 1 */ + if ((((ITs_enabled & FDCAN_IT_LIST_RX_FIFO0) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_RX_FIFO1) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_SMSG) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_MISC) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) != 0U))) + { + /* Do nothing */ + } + else /* no more interrupts enabled on interrupt line 1 */ + { + /* Disable interrupt line 1 */ + CLEAR_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE1); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Handles FDCAN interrupt request. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +void HAL_FDCAN_IRQHandler(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t TxEventFifoITs; + uint32_t RxFifo0ITs; + uint32_t RxFifo1ITs; + uint32_t Errors; + uint32_t ErrorStatusITs; + uint32_t TransmittedBuffers; + uint32_t AbortedBuffers; + + TxEventFifoITs = hfdcan->Instance->IR & FDCAN_TX_EVENT_FIFO_MASK; + TxEventFifoITs &= hfdcan->Instance->IE; + RxFifo0ITs = hfdcan->Instance->IR & FDCAN_RX_FIFO0_MASK; + RxFifo0ITs &= hfdcan->Instance->IE; + RxFifo1ITs = hfdcan->Instance->IR & FDCAN_RX_FIFO1_MASK; + RxFifo1ITs &= hfdcan->Instance->IE; + Errors = hfdcan->Instance->IR & FDCAN_ERROR_MASK; + Errors &= hfdcan->Instance->IE; + ErrorStatusITs = hfdcan->Instance->IR & FDCAN_ERROR_STATUS_MASK; + ErrorStatusITs &= hfdcan->Instance->IE; + + /* High Priority Message interrupt management *******************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_RX_HIGH_PRIORITY_MSG) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_RX_HIGH_PRIORITY_MSG) != 0U) + { + /* Clear the High Priority Message flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_RX_HIGH_PRIORITY_MSG); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->HighPriorityMessageCallback(hfdcan); +#else + /* High Priority Message Callback */ + HAL_FDCAN_HighPriorityMessageCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Transmission Abort interrupt management **********************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TX_ABORT_COMPLETE) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* List of aborted monitored buffers */ + AbortedBuffers = hfdcan->Instance->TXBCF; + AbortedBuffers &= hfdcan->Instance->TXBCIE; + + /* Clear the Transmission Cancellation flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_ABORT_COMPLETE); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxBufferAbortCallback(hfdcan, AbortedBuffers); +#else + /* Transmission Cancellation Callback */ + HAL_FDCAN_TxBufferAbortCallback(hfdcan, AbortedBuffers); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Tx event FIFO interrupts management **************************************/ + if (TxEventFifoITs != 0U) + { + /* Clear the Tx Event FIFO flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, TxEventFifoITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxEventFifoCallback(hfdcan, TxEventFifoITs); +#else + /* Tx Event FIFO Callback */ + HAL_FDCAN_TxEventFifoCallback(hfdcan, TxEventFifoITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Rx FIFO 0 interrupts management ******************************************/ + if (RxFifo0ITs != 0U) + { + /* Clear the Rx FIFO 0 flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, RxFifo0ITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->RxFifo0Callback(hfdcan, RxFifo0ITs); +#else + /* Rx FIFO 0 Callback */ + HAL_FDCAN_RxFifo0Callback(hfdcan, RxFifo0ITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Rx FIFO 1 interrupts management ******************************************/ + if (RxFifo1ITs != 0U) + { + /* Clear the Rx FIFO 1 flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, RxFifo1ITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->RxFifo1Callback(hfdcan, RxFifo1ITs); +#else + /* Rx FIFO 1 Callback */ + HAL_FDCAN_RxFifo1Callback(hfdcan, RxFifo1ITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Tx FIFO empty interrupt management ***************************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TX_FIFO_EMPTY) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TX_FIFO_EMPTY) != 0U) + { + /* Clear the Tx FIFO empty flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_FIFO_EMPTY); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxFifoEmptyCallback(hfdcan); +#else + /* Tx FIFO empty Callback */ + HAL_FDCAN_TxFifoEmptyCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Transmission Complete interrupt management *******************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TX_COMPLETE) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TX_COMPLETE) != 0U) + { + /* List of transmitted monitored buffers */ + TransmittedBuffers = hfdcan->Instance->TXBTO; + TransmittedBuffers &= hfdcan->Instance->TXBTIE; + + /* Clear the Transmission Complete flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_COMPLETE); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxBufferCompleteCallback(hfdcan, TransmittedBuffers); +#else + /* Transmission Complete Callback */ + HAL_FDCAN_TxBufferCompleteCallback(hfdcan, TransmittedBuffers); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Timestamp Wraparound interrupt management ********************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TIMESTAMP_WRAPAROUND) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TIMESTAMP_WRAPAROUND) != 0U) + { + /* Clear the Timestamp Wraparound flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TIMESTAMP_WRAPAROUND); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TimestampWraparoundCallback(hfdcan); +#else + /* Timestamp Wraparound Callback */ + HAL_FDCAN_TimestampWraparoundCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Timeout Occurred interrupt management ************************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_TIMEOUT_OCCURRED) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_TIMEOUT_OCCURRED) != 0U) + { + /* Clear the Timeout Occurred flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TIMEOUT_OCCURRED); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TimeoutOccurredCallback(hfdcan); +#else + /* Timeout Occurred Callback */ + HAL_FDCAN_TimeoutOccurredCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Message RAM access failure interrupt management **************************/ + if (__HAL_FDCAN_GET_FLAG(hfdcan, FDCAN_FLAG_RAM_ACCESS_FAILURE) != 0U) + { + if (__HAL_FDCAN_GET_IT_SOURCE(hfdcan, FDCAN_IT_RAM_ACCESS_FAILURE) != 0U) + { + /* Clear the Message RAM access failure flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_RAM_ACCESS_FAILURE); + + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_RAM_ACCESS; + } + } + + /* Error Status interrupts management ***************************************/ + if (ErrorStatusITs != 0U) + { + /* Clear the Error flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, ErrorStatusITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->ErrorStatusCallback(hfdcan, ErrorStatusITs); +#else + /* Error Status Callback */ + HAL_FDCAN_ErrorStatusCallback(hfdcan, ErrorStatusITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Error interrupts management **********************************************/ + if (Errors != 0U) + { + /* Clear the Error flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, Errors); + + /* Update error code */ + hfdcan->ErrorCode |= Errors; + } + + if (hfdcan->ErrorCode != HAL_FDCAN_ERROR_NONE) + { +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->ErrorCallback(hfdcan); +#else + /* Error Callback */ + HAL_FDCAN_ErrorCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group5 Callback functions + * @brief FDCAN Callback functions + * +@verbatim + ============================================================================== + ##### Callback functions ##### + ============================================================================== + [..] + This subsection provides the following callback functions: + (+) HAL_FDCAN_TxEventFifoCallback + (+) HAL_FDCAN_RxFifo0Callback + (+) HAL_FDCAN_RxFifo1Callback + (+) HAL_FDCAN_TxFifoEmptyCallback + (+) HAL_FDCAN_TxBufferCompleteCallback + (+) HAL_FDCAN_TxBufferAbortCallback + (+) HAL_FDCAN_HighPriorityMessageCallback + (+) HAL_FDCAN_TimestampWraparoundCallback + (+) HAL_FDCAN_TimeoutOccurredCallback + (+) HAL_FDCAN_ErrorCallback + (+) HAL_FDCAN_ErrorStatusCallback + +@endverbatim + * @{ + */ + +/** + * @brief Tx Event callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TxEventFifoITs indicates which Tx Event FIFO interrupts are signalled. + * This parameter can be any combination of @arg FDCAN_Tx_Event_Fifo_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_TxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(TxEventFifoITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxEventFifoCallback could be implemented in the user file + */ +} + +/** + * @brief Rx FIFO 0 callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo0ITs indicates which Rx FIFO 0 interrupts are signalled. + * This parameter can be any combination of @arg FDCAN_Rx_Fifo0_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(RxFifo0ITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_RxFifo0Callback could be implemented in the user file + */ +} + +/** + * @brief Rx FIFO 1 callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo1ITs indicates which Rx FIFO 1 interrupts are signalled. + * This parameter can be any combination of @arg FDCAN_Rx_Fifo1_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_RxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(RxFifo1ITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_RxFifo1Callback could be implemented in the user file + */ +} + +/** + * @brief Tx FIFO Empty callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TxFifoEmptyCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxFifoEmptyCallback could be implemented in the user file + */ +} + +/** + * @brief Transmission Complete callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndexes Indexes of the transmitted buffers. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval None + */ +__weak void HAL_FDCAN_TxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(BufferIndexes); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxBufferCompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Transmission Cancellation callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndexes Indexes of the aborted buffers. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval None + */ +__weak void HAL_FDCAN_TxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(BufferIndexes); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxBufferAbortCallback could be implemented in the user file + */ +} + +/** + * @brief Timestamp Wraparound callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TimestampWraparoundCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TimestampWraparoundCallback could be implemented in the user file + */ +} + +/** + * @brief Timeout Occurred callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TimeoutOccurredCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TimeoutOccurredCallback could be implemented in the user file + */ +} + +/** + * @brief High Priority Message callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_HighPriorityMessageCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_HighPriorityMessageCallback could be implemented in the user file + */ +} + +/** + * @brief Error callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_ErrorCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Error status callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ErrorStatusITs indicates which Error Status interrupts are signaled. + * This parameter can be any combination of @arg FDCAN_Error_Status_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_ErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(ErrorStatusITs); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FDCAN_ErrorStatusCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group6 Peripheral State functions + * @brief FDCAN Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) HAL_FDCAN_GetState() : Return the FDCAN state. + (+) HAL_FDCAN_GetError() : Return the FDCAN error code if any. + +@endverbatim + * @{ + */ +/** + * @brief Return the FDCAN state + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL state + */ +HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan) +{ + /* Return FDCAN state */ + return hfdcan->State; +} + +/** + * @brief Return the FDCAN error code + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval FDCAN Error Code + */ +uint32_t HAL_FDCAN_GetError(FDCAN_HandleTypeDef *hfdcan) +{ + /* Return FDCAN error code */ + return hfdcan->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup FDCAN_Private_Functions + * @{ + */ + +/** + * @brief Calculate each RAM block start address and size + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval none + */ +static void FDCAN_CalcultateRamBlockAddresses(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t RAMcounter; + uint32_t SramCanInstanceBase = SRAMCAN_BASE; +#if defined(FDCAN2) + + if (hfdcan->Instance == FDCAN2) + { + SramCanInstanceBase += SRAMCAN_SIZE; + } +#endif /* FDCAN2 */ + + /* Standard filter list start address */ + hfdcan->msgRam.StandardFilterSA = SramCanInstanceBase + SRAMCAN_FLSSA; + + /* Standard filter elements number */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_LSS, (hfdcan->Init.StdFiltersNbr << FDCAN_RXGFC_LSS_Pos)); + + /* Extended filter list start address */ + hfdcan->msgRam.ExtendedFilterSA = SramCanInstanceBase + SRAMCAN_FLESA; + + /* Extended filter elements number */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_LSE, (hfdcan->Init.ExtFiltersNbr << FDCAN_RXGFC_LSE_Pos)); + + /* Rx FIFO 0 start address */ + hfdcan->msgRam.RxFIFO0SA = SramCanInstanceBase + SRAMCAN_RF0SA; + + /* Rx FIFO 1 start address */ + hfdcan->msgRam.RxFIFO1SA = SramCanInstanceBase + SRAMCAN_RF1SA; + + /* Tx event FIFO start address */ + hfdcan->msgRam.TxEventFIFOSA = SramCanInstanceBase + SRAMCAN_TEFSA; + + /* Tx FIFO/queue start address */ + hfdcan->msgRam.TxFIFOQSA = SramCanInstanceBase + SRAMCAN_TFQSA; + + /* Flush the allocated Message RAM area */ + for (RAMcounter = SramCanInstanceBase; RAMcounter < (SramCanInstanceBase + SRAMCAN_SIZE); RAMcounter += 4U) + { + *(uint32_t *)(RAMcounter) = 0x00000000U; + } +} + +/** + * @brief Copy Tx message to the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxHeader pointer to a FDCAN_TxHeaderTypeDef structure. + * @param pTxData pointer to a buffer containing the payload of the Tx frame. + * @param BufferIndex index of the buffer to be configured. + * @retval none + */ +static void FDCAN_CopyMessageToRAM(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxHeaderTypeDef *pTxHeader, uint8_t *pTxData, uint32_t BufferIndex) +{ + uint32_t TxElementW1; + uint32_t TxElementW2; + uint32_t *TxAddress; + uint32_t ByteCounter; + + /* Build first word of Tx header element */ + if (pTxHeader->IdType == FDCAN_STANDARD_ID) + { + TxElementW1 = (pTxHeader->ErrorStateIndicator | + FDCAN_STANDARD_ID | + pTxHeader->TxFrameType | + (pTxHeader->Identifier << 18U)); + } + else /* pTxHeader->IdType == FDCAN_EXTENDED_ID */ + { + TxElementW1 = (pTxHeader->ErrorStateIndicator | + FDCAN_EXTENDED_ID | + pTxHeader->TxFrameType | + pTxHeader->Identifier); + } + + /* Build second word of Tx header element */ + TxElementW2 = ((pTxHeader->MessageMarker << 24U) | + pTxHeader->TxEventFifoControl | + pTxHeader->FDFormat | + pTxHeader->BitRateSwitch | + pTxHeader->DataLength); + + /* Calculate Tx element address */ + TxAddress = (uint32_t *)(hfdcan->msgRam.TxFIFOQSA + (BufferIndex * SRAMCAN_TFQ_SIZE)); + + /* Write Tx element header to the message RAM */ + *TxAddress = TxElementW1; + TxAddress++; + *TxAddress = TxElementW2; + TxAddress++; + + /* Write Tx payload to the message RAM */ + for (ByteCounter = 0; ByteCounter < DLCtoBytes[pTxHeader->DataLength >> 16U]; ByteCounter += 4U) + { + *TxAddress = (((uint32_t)pTxData[ByteCounter + 3U] << 24U) | + ((uint32_t)pTxData[ByteCounter + 2U] << 16U) | + ((uint32_t)pTxData[ByteCounter + 1U] << 8U) | + (uint32_t)pTxData[ByteCounter]); + TxAddress++; + } +} + +/** + * @} + */ +#endif /* HAL_FDCAN_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* FDCAN1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c new file mode 100644 index 0000000..4b2b2ff --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c @@ -0,0 +1,719 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch and cache lines. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Prefetch on I-Code + (+) 32 cache lines of 4*64 bits on I-Code + (+) Error code correction (ECC) : Data in flash are 72-bits word + (8 bits added per double word) + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32G0xx devices. + + (#) Flash Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: double word and fast program (full row programming) + (++) There are two modes of programming: + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions: + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_OB_Launch() function. + In this case, a reset is generated + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the Instruction cache + (+) Reset the Instruction cache + (+) Enable/Disable the Flash power-down during low-power run and sleep modes + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_FLASH_ERROR_NONE, \ + .ProcedureOnGoing = FLASH_TYPENONE, \ + .Address = 0U, \ + .Banks = 0U, \ + .Page = 0U, \ + .NbPagesToErase = 0U + }; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program double word or fast program of a row at a specified address. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG or FSTPG Bit */ + CLEAR_BIT(FLASH->CR, TypeProgram); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Program double word or fast program of a row at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = TypeProgram; + pFlash.Address = Address; + + /* Enable End of Operation and Error interrupts */ + FLASH->CR |= FLASH_CR_EOPIE | FLASH_CR_ERRIE; + + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + } + + /* return status */ + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t param; + uint32_t error; + + /* Save flash errors. */ + error = (FLASH->SR & FLASH_SR_ERRORS); + + /* A] Set parameter for user or error callbacks */ + /* check operation was a program or erase */ + if ((pFlash.ProcedureOnGoing & FLASH_TYPEERASE_MASS) != 0x00U) + { + /* return bank number */ + param = pFlash.Banks; + } + else + { + /* Clear operation only for page erase or program */ + CLEAR_BIT(FLASH->CR, pFlash.ProcedureOnGoing); + + if ((pFlash.ProcedureOnGoing & (FLASH_TYPEPROGRAM_DOUBLEWORD | FLASH_TYPEPROGRAM_FAST)) != 0x00U) + { + /* return address being programmed */ + param = pFlash.Address; + } + else + { + /* return page number being erased */ + param = pFlash.Page; + } + } + + /* B] Check errors */ + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* clear error flags */ + FLASH->SR = FLASH_SR_ERRORS; + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + + /* Error callback */ + HAL_FLASH_OperationErrorCallback(param); + } + + /* C] Check FLASH End of Operation flag */ + if ((FLASH->SR & FLASH_SR_EOP) != 0x00U) + { + /* Clear FLASH End of Operation pending bit */ + FLASH->SR = FLASH_SR_EOP; + + if (pFlash.ProcedureOnGoing == FLASH_TYPEERASE_PAGES) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase*/ + if (pFlash.NbPagesToErase != 0x00U) + { + /* Increment page number */ + pFlash.Page++; + FLASH_PageErase(pFlash.Banks, pFlash.Page); + } + else + { + /* No more pages to erase: stop erase pages procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + } + else + { + /*Stop the ongoing procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + + /* User callback */ + HAL_FLASH_EndOfOperationCallback(param); + } + + if (pFlash.ProcedureOnGoing == FLASH_TYPENONE) + { + /* Disable End of Operation and Error interrupts */ + FLASH->CR &= ~(FLASH_CR_EOPIE | FLASH_CR_ERRIE); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page which has been erased + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* verify Flash is unlock */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Lock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + /* verify Flash is locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Unlock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00U) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + + /* verify option bytes are unlocked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) == 0x00U) + { + status = HAL_OK; + } + } + + return status; +} + +/** + * @brief Lock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK); + + /* verify option bytes are locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Launch the option byte loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* We should not reach here : Option byte launch generates Option byte reset + so return error */ + return HAL_ERROR; +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be + * @arg @ref HAL_FLASH_ERROR_NONE No error set + * @arg @ref HAL_FLASH_ERROR_OP Operation error + * @arg @ref HAL_FLASH_ERROR_PROG Programming error + * @arg @ref HAL_FLASH_ERROR_WRP Write protection error + * @arg @ref HAL_FLASH_ERROR_PGA Programming alignment error + * @arg @ref HAL_FLASH_ERROR_SIZ Size error + * @arg @ref HAL_FLASH_ERROR_PGS Programming sequence error + * @arg @ref HAL_FLASH_ERROR_MIS Fast programming data miss error + * @arg @ref HAL_FLASH_ERROR_FAST Fast programming error + * @arg @ref HAL_FLASH_ERROR_RD Read Protection error (PCROP)(*) + * @arg @ref HAL_FLASH_ERROR_OPTV Option validity error + * @arg @ref HAL_FLASH_ERROR_ECCD two ECC errors have been detected + * @note (*) availability depends on devices + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + uint32_t error; + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + uint32_t timeout = HAL_GetTick() + Timeout; + + /* Wait if any operation is ongoing */ +#if defined(FLASH_DBANK_SUPPORT) + error = (FLASH_SR_BSY1 | FLASH_SR_BSY2); +#else + error = FLASH_SR_BSY1; +#endif + + while ((FLASH->SR & error) != 0x00U) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + /* check flash errors */ + error = (FLASH->SR & FLASH_SR_ERRORS); + + /* Clear SR register */ + FLASH->SR = FLASH_SR_CLEAR; + + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode = error; + return HAL_ERROR; + } + + /* Wait for control register to be written */ + timeout = HAL_GetTick() + Timeout; + + while ((FLASH->SR & FLASH_SR_CFGBSY) != 0x00U) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Program double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) +{ + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Program first word */ + *(uint32_t *)Address = (uint32_t)Data; + + /* Barrier to ensure programming is performed in 2 steps, in right order + (independently of compiler optimization behavior) */ + __ISB(); + + /* Program second word */ + *(uint32_t *)(Address + 4U) = (uint32_t)(Data >> 32U); +} + +/** + * @brief Fast program a 32 row double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param DataAddress Specifies the address where the data are stored. + * @retval None + */ +static __RAM_FUNC void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 0; + uint32_t dest = Address; + uint32_t src = DataAddress; + uint32_t primask_bit; + + /* Set FSTPG bit */ + SET_BIT(FLASH->CR, FLASH_CR_FSTPG); + + /* Enter critical section: row programming should not be longer than 7 ms */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Fast Program : 64 words */ + while (index < 64U) + { + *(uint32_t *)dest = *(uint32_t *)src; + src += 4U; + dest += 4U; + index++; + } + + /* wait for BSY1 in order to be sure that flash operation is ended befoire + allowing prefetch in flash. Timeout does not return status, as it will + be anyway done later */ + +#if defined(FLASH_DBANK_SUPPORT) + while ((FLASH->SR & (FLASH_SR_BSY1 | FLASH_SR_BSY2)) != 0x00U) +#else + while ((FLASH->SR & FLASH_SR_BSY1) != 0x00U) +#endif + { + } + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c new file mode 100644 index 0000000..7f68312 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c @@ -0,0 +1,1304 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32G0xx + devices contains the following additional features + + (+) Capacity up to 128 Kbytes with single bank architecture supporting read-while-write + capability (RWW) + (+) Single bank memory organization + (+) PCROP protection + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32G0xx devices. It includes + (#) Flash Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Erase page, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to : + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Configure the PCROP protection + (++) Set Securable memory area and boot entry point + + (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to : + (++) Get the value of a write protection area + (++) Know if the read protection is activated + (++) Get the value of the user Option Bytes + (++) Get Securable memory area and boot entry point information + + (#) Enable or disable debugger usage using HAL_FLASHEx_EnableDebugger and + HAL_FLASHEx_DisableDebugger. + + (#) Check is flash content is empty or not using HAL_FLASHEx_FlashEmptyCheck. + and modify this setting (for flash loader purpose e.g.) using + HAL_FLASHEx_ForceFlashEmpty. + + (#) Enable securable memory area protectionusing HAL_FLASHEx_EnableSecMemProtection + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(uint32_t Banks); +void FLASH_FlushCaches(void); +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset); +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel); +static uint32_t FLASH_OB_GetRDP(void); +static uint32_t FLASH_OB_GetUser(void); +#if defined(FLASH_PCROP_SUPPORT) +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr); +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr); +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr); +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr); +#if defined(FLASH_DBANK_SUPPORT) +static void FLASH_OB_PCROP2AConfig(uint32_t PCROP2AStartAddr, uint32_t PCROP2AEndAddr); +static void FLASH_OB_PCROP2BConfig(uint32_t PCROP2BStartAddr, uint32_t PCROP2BEndAddr); +static void FLASH_OB_GetPCROP2A(uint32_t *PCROP2AStartAddr, uint32_t *PCROP2AEndAddr); +static void FLASH_OB_GetPCROP2B(uint32_t *PCROP2BStartAddr, uint32_t *PCROP2BEndAddr); +#endif +#endif +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize, uint32_t SecSize2); +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize, uint32_t *SecSize2); +#else +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize); +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize); +#endif +#endif +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASH Extended Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @param[in] pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @param[out] PageError Pointer to variable that contains the configuration + * information on faulty page in case of error (0xFFFFFFFF means that all + * the pages have been correctly erased) + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status; + uint32_t index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { +#if !defined(FLASH_DBANK_SUPPORT) + /* For single bank product force Banks to Bank 1 */ + pEraseInit->Banks = FLASH_BANK_1; +#endif + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Proceed to Mass Erase */ + FLASH_MassErase(pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + for (index = pEraseInit->Page; index < (pEraseInit->Page + pEraseInit->NbPages); index++) + { + /* Start erase page */ + FLASH_PageErase(pEraseInit->Banks, index); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = index; + break; + } + } + + /* If operation is completed or interrupted, disable the Page Erase Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @param pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* save procedure for interrupt treatment */ + pFlash.ProcedureOnGoing = pEraseInit->TypeErase; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { +#if !defined(FLASH_DBANK_SUPPORT) + /* For single bank product force Banks to Bank 1 */ + pEraseInit->Banks = FLASH_BANK_1; +#endif + /* Store Bank number */ + pFlash.Banks = pEraseInit->Banks; + + /* Enable End of Operation and Error interrupts */ + FLASH->CR |= FLASH_CR_EOPIE | FLASH_CR_ERRIE; + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Set Page to 0 for Interrupt callback management */ + pFlash.Page = 0; + + /* Proceed to Mass Erase */ + FLASH_MassErase(pEraseInit->Banks); + } + else + { + /* Erase by page to be done */ + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->Page; + + /*Erase 1st page and wait for IT */ + FLASH_PageErase(pEraseInit->Banks, pEraseInit->Page); + } + } + + /* return status */ + return status; +} + +/** + * @brief Program Option bytes. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * @note To configure any option bytes, the option lock bit OPTLOCK must be + * cleared with the call of @ref HAL_FLASH_OB_Unlock() function. + * @note New option bytes configuration will be taken into account only + * - after an option bytes launch through the call of @ref HAL_FLASH_OB_Launch() + * - a Power On Reset + * - an exit from Standby or Shutdown mode. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + uint32_t optr; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write protection configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_WRP) != 0x00U) + { + /* Configure of Write protection on the selected area */ + FLASH_OB_WRPConfig(pOBInit->WRPArea, pOBInit->WRPStartOffset, pOBInit->WRPEndOffset); + } + + /* Option register */ + if ((pOBInit->OptionType & (OPTIONBYTE_RDP | OPTIONBYTE_USER)) == (OPTIONBYTE_RDP | OPTIONBYTE_USER)) + { + /* Fully modify OPTR register with RDP & user data */ + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_RDP) != 0x00U) + { + /* Only modify RDP so get current user data */ + optr = FLASH_OB_GetUser(); + FLASH_OB_OptrConfig(optr, optr, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_USER) != 0x00U) + { + /* Only modify user so get current RDP level */ + optr = FLASH_OB_GetRDP(); + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, optr); + } + else + { + /* nothing to do */ + } + +#if defined(FLASH_PCROP_SUPPORT) + /* PCROP Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0x00U) + { + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(pOBInit->PCROPConfig)); + + if ((pOBInit->PCROPConfig & (OB_PCROP_ZONE_A | OB_PCROP_RDP_ERASE)) != 0x00U) + { + /* Configure the 1A Proprietary code readout protection */ + FLASH_OB_PCROP1AConfig(pOBInit->PCROPConfig, pOBInit->PCROP1AStartAddr, pOBInit->PCROP1AEndAddr); + } + + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE_B) != 0x00U) + { + /* Configure the 1B Proprietary code readout protection */ + FLASH_OB_PCROP1BConfig(pOBInit->PCROP1BStartAddr, pOBInit->PCROP1BEndAddr); + } + +#if defined(FLASH_DBANK_SUPPORT) + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE2_A) != 0x00U) + { + /* Configure the 2A Proprietary code readout protection */ + FLASH_OB_PCROP2AConfig(pOBInit->PCROP2AStartAddr, pOBInit->PCROP2AEndAddr); + } + + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE2_B) != 0x00U) + { + /* Configure the 2B Proprietary code readout protection */ + FLASH_OB_PCROP2BConfig(pOBInit->PCROP2BStartAddr, pOBInit->PCROP2BEndAddr); + } +#endif + } +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) + /* Securable Memory Area Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_SEC) != 0x00U) + { +#if defined(FLASH_DBANK_SUPPORT) + /* Configure the securable memory area protection */ + FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize, pOBInit->SecSize2); +#else + /* Configure the securable memory area protection */ + FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize); +#endif + } +#endif + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Get the Option bytes configuration. + * @note warning: this API only read flash register, it does not reflect any + * change that would have been programmed between previous Option byte + * loading and current call. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that contains the + * configuration information. The fields pOBInit->WRPArea should + * indicate which area is requested for the WRP. + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_ALL; + + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(pOBInit->WRPArea, &(pOBInit->WRPStartOffset), &(pOBInit->WRPEndOffset)); + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + pOBInit->USERType = OB_USER_ALL; + +#if defined(FLASH_PCROP_SUPPORT) + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP1A(&(pOBInit->PCROPConfig), &(pOBInit->PCROP1AStartAddr), &(pOBInit->PCROP1AEndAddr)); + FLASH_OB_GetPCROP1B(&(pOBInit->PCROP1BStartAddr), &(pOBInit->PCROP1BEndAddr)); + pOBInit->PCROPConfig |= (OB_PCROP_ZONE_A | OB_PCROP_ZONE_B); +#if defined(FLASH_DBANK_SUPPORT) + FLASH_OB_GetPCROP2A(&(pOBInit->PCROP2AStartAddr), &(pOBInit->PCROP2AEndAddr)); + FLASH_OB_GetPCROP2B(&(pOBInit->PCROP2BStartAddr), &(pOBInit->PCROP2BEndAddr)); + pOBInit->PCROPConfig |= (OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B); +#endif +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) + /* Get the Securable Memory Area protection */ + FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize), &(pOBInit->SecSize2)); +#else + /* Get the Securable Memory Area protection */ + FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize)); +#endif +#endif +} + +#if defined(FLASH_ACR_DBG_SWEN) +/** + * @brief Enable Debugger. + * @note After calling this API, flash interface allow debugger intrusion. + * @retval None + */ +void HAL_FLASHEx_EnableDebugger(void) +{ + FLASH->ACR |= FLASH_ACR_DBG_SWEN; +} + + +/** + * @brief Disable Debugger. + * @note After calling this API, Debugger is disabled: it is no more possible to + * break, see CPU register, etc... + * @retval None + */ +void HAL_FLASHEx_DisableDebugger(void) +{ + FLASH->ACR &= ~FLASH_ACR_DBG_SWEN; +} +#endif /* FLASH_ACR_DBG_SWEN */ + +/** + * @brief Flash Empty check + * @note This API checks if first location in Flash is programmed or not. + * This check is done once by Option Byte Loader. + * @retval 0 if 1st location is not programmed else + */ +uint32_t HAL_FLASHEx_FlashEmptyCheck(void) +{ + return ((FLASH->ACR & FLASH_ACR_PROGEMPTY)); +} + + +/** + * @brief Force Empty check value. + * @note Allows to modify program empty check value in order to force this + * infrmation in Flash Interface, for all next reset that do not launch + * Option Byte Loader. + * @param FlashEmpty this parameter can be a value of @ref FLASHEx_Empty_Check + * @retval None + */ +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty) +{ + uint32_t acr; + assert_param(IS_FLASH_EMPTY_CHECK(FlashEmpty)); + + acr = (FLASH->ACR & ~FLASH_ACR_PROGEMPTY); + FLASH->ACR = (acr | FlashEmpty); +} + + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +/** + * @brief Securable memory area protection enable + * @param Banks Select Bank to be secured. + * This parameter can be a value of @ref FLASH_Banks + * @note On some devices, there is only 1 bank so parameter has to be set FLASH_BANK_1. + * @note This API locks Securable memory area which is defined in SEC_SIZE option byte + * (that can be retrieved calling HAL_FLASHEx_OBGetConfig API and checking + * Secsize). + * @note SEC_PROT bit can only be set, it will be reset by system reset. + * @retval None + */ +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks) +{ +#if defined(FLASH_DBANK_SUPPORT) + assert_param(IS_FLASH_BANK(Banks)); + + if (Banks == (FLASH_BANK_2 | FLASH_BANK_1)) + { + FLASH->CR |= (FLASH_CR_SEC_PROT2 | FLASH_CR_SEC_PROT); + } + else if (Banks == FLASH_BANK_2) + { + FLASH->CR |= FLASH_CR_SEC_PROT2; + } + else +#else + UNUSED(Banks); +#endif + { + FLASH->CR |= FLASH_CR_SEC_PROT; + } +} +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Mass erase of FLASH memory. + * @param Banks: Banks to be erased + * This parameter can be a combination of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased* + * @note (*) availability depends on devices + * @retval None + */ +static void FLASH_MassErase(uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Set the Mass Erase Bit and start bit */ + FLASH->CR |= (FLASH_CR_STRT | Banks); +} + +/** + * @brief Erase the specified FLASH memory page. + * @param Banks: Banks to be erased + * This parameter can one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased* + * @param Page FLASH page to erase + * This parameter must be a value between 0 and (max number of pages in Flash - 1) + * @note (*) availability depends on devices + * @retval None + */ +void FLASH_PageErase(uint32_t Banks, uint32_t Page) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + assert_param(IS_FLASH_PAGE(Page)); + + /* Get configuration register, then clear page number */ + tmp = (FLASH->CR & ~FLASH_CR_PNB); + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if page has to be erased in bank 1 or 2 */ + if(Banks != FLASH_BANK_1) + { + tmp |= FLASH_CR_BKER; + } + else + { + tmp &= ~FLASH_CR_BKER; + } +#endif + + /* Set page number, Page Erase bit & Start bit */ + FLASH->CR = (tmp | (FLASH_CR_STRT | (Page << FLASH_CR_PNB_Pos) | FLASH_CR_PER)); +} + +/** + * @brief Flush the instruction cache. + * @retval None + */ +void FLASH_FlushCaches(void) +{ + /* Flush instruction cache */ + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + /* Disable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + /* Reset instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + /* Enable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + } +} + + +/** + * @brief Configure the write protection of the desired pages. + * @note When WRP is active in a zone, it cannot be erased or programmed. + * Consequently, a software mass erase cannot be performed if one zone + * is write-protected. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase Flash memory if the CPU debug + * features are connected (JTAG or single wire) or boot code is being + * executed from RAM or System flash, even if WRP is not activated. + * @param WRPArea Specifies the area to be configured. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @arg @ref OB_WRPAREA_ZONE2_A Flash Bank 2 Zone A (*) + * @arg @ref OB_WRPAREA_ZONE2_B Flash Bank 2 Zone B (*) + * @note (*) availability depends on devices + * @param WRPStartOffset Specifies the start page of the write protected area + * This parameter can be page number between 0 and (max number of pages in the Flash Bank - 1) + * @param WRDPEndOffset Specifies the end page of the write protected area + * This parameter can be page number between WRPStartOffset and (max number of pages in the Flash Bank - 1) + * @retval None + */ +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + assert_param(IS_FLASH_PAGE(WRPStartOffset)); + assert_param(IS_FLASH_PAGE(WRDPEndOffset)); + + /* Configure the write protected area */ + if (WRPArea == OB_WRPAREA_ZONE_A) + { + FLASH->WRP1AR = ((WRDPEndOffset << FLASH_WRP1AR_WRP1A_END_Pos) | WRPStartOffset); + } +#if defined(FLASH_DBANK_SUPPORT) + else if (WRPArea == OB_WRPAREA_ZONE2_A) + { + FLASH->WRP2AR = ((WRDPEndOffset << FLASH_WRP2AR_WRP2A_END_Pos) | WRPStartOffset); + } + else if (WRPArea == OB_WRPAREA_ZONE2_B) + { + FLASH->WRP2BR = ((WRDPEndOffset << FLASH_WRP2BR_WRP2B_END_Pos) | WRPStartOffset); + } +#endif + else + { + FLASH->WRP1BR = ((WRDPEndOffset << FLASH_WRP1BR_WRP1B_END_Pos) | WRPStartOffset); + } +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @param[in] WRPArea Specifies the area to be returned. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @arg @ref OB_WRPAREA_ZONE2_A Flash Bank 2 Zone A (*) + * @arg @ref OB_WRPAREA_ZONE2_B Flash Bank 2 Zone B (*) + * @note (*) availability depends on devices + * @param[out] WRPStartOffset Specifies the address where to copied the start page + * of the write protected area + * @param[out] WRDPEndOffset Dpecifies the address where to copied the end page of + * the write protected area + * @retval None + */ +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + + /* Get the configuration of the write protected area */ + if (WRPArea == OB_WRPAREA_ZONE_A) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos); + } +#if defined(FLASH_DBANK_SUPPORT) + else if (WRPArea == OB_WRPAREA_ZONE2_A) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_END) >> FLASH_WRP2AR_WRP2A_END_Pos); + } + else if (WRPArea == OB_WRPAREA_ZONE2_B) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos); + } +#endif +else + { + *WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos); + } +} + +/** + * @brief Set user & RDP configuration + * @note !!! Warning : When enabling OB_RDP level 2 it is no more possible + * to go back to level 1 or 0 !!! + * @param UserType The FLASH User Option Bytes to be modified. + * This parameter can be a combination of @ref FLASH_OB_USER_Type + * @param UserConfig The FLASH User Option Bytes values. + * This parameter can be a combination of: + * @arg @ref FLASH_OB_USER_BOR_ENABLE(*) + * @arg @ref FLASH_OB_USER_BOR_LEVEL(*) + * @arg @ref FLASH_OB_USER_RESET_CONFIG(*) + * @arg @ref FLASH_OB_USER_nRST_STOP + * @arg @ref FLASH_OB_USER_nRST_STANDBY + * @arg @ref FLASH_OB_USER_nRST_SHUTDOWN(*) + * @arg @ref FLASH_OB_USER_IWDG_SW + * @arg @ref FLASH_OB_USER_IWDG_STOP + * @arg @ref FLASH_OB_USER_IWDG_STANDBY + * @arg @ref FLASH_OB_USER_WWDG_SW + * @arg @ref FLASH_OB_USER_SRAM_PARITY + * @arg @ref FLASH_OB_USER_BANK_SWAP(*) + * @arg @ref FLASH_OB_USER_DUAL_BANK(*) + * @arg @ref FLASH_OB_USER_nBOOT_SEL + * @arg @ref FLASH_OB_USER_nBOOT1 + * @arg @ref FLASH_OB_USER_nBOOT0 + * @arg @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Memory Read protection + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + * @note (*) availability depends on devices + * @retval None + */ +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel) +{ + uint32_t optr; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + assert_param(IS_OB_USER_CONFIG(UserType, UserConfig)); + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Configure the RDP level in the option bytes register */ + optr = FLASH->OPTR; + optr &= ~(UserType | FLASH_OPTR_RDP); + FLASH->OPTR = (optr | UserConfig | RDPLevel); +} + +/** + * @brief Return the FLASH Read Protection level. + * @retval FLASH ReadOut Protection Status: + * This return value can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdplvl = READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP); + + if ((rdplvl != OB_RDP_LEVEL_0) && (rdplvl != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return rdplvl; + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values. It will be a combination of all the following values: + * @arg @ref FLASH_OB_USER_BOR_ENABLE(*) + * @arg @ref FLASH_OB_USER_BOR_LEVEL(*) + * @arg @ref FLASH_OB_USER_RESET_CONFIG(*) + * @arg @ref FLASH_OB_USER_nRST_STOP + * @arg @ref FLASH_OB_USER_nRST_STANDBY + * @arg @ref FLASH_OB_USER_nRST_SHUTDOWN(*) + * @arg @ref FLASH_OB_USER_IWDG_SW + * @arg @ref FLASH_OB_USER_IWDG_STOP + * @arg @ref FLASH_OB_USER_IWDG_STANDBY + * @arg @ref FLASH_OB_USER_WWDG_SW + * @arg @ref FLASH_OB_USER_SRAM_PARITY + * @arg @ref FLASH_OB_USER_BANK_SWAP(*) + * @arg @ref FLASH_OB_USER_DUAL_BANK(*) + * @arg @ref FLASH_OB_USER_nBOOT_SEL + * @arg @ref FLASH_OB_USER_nBOOT1 + * @arg @ref FLASH_OB_USER_nBOOT0 + * @arg @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + * @note (*) availability depends on devices + */ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t user = ((FLASH->OPTR & ~FLASH_OPTR_RDP) & OB_USER_ALL); + return user; +} + +#if defined(FLASH_PCROP_SUPPORT) +/** + * @brief Configure the 1A Proprietary code readout protection & erase configuration on RDP regression. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROPConfig specifies the erase configuration (OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE) + * on RDP level 1 regression. + * @param PCROP1AStartAddr Specifies the Zone 1A Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1AEndAddr Specifies the Zone 1A end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1AStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t pcrop1aend; + uint32_t ropbase; + + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(PCROPConfig)); + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1AStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1AEndAddr)); + + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1AStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1AEndAddr)); + + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* get pcrop 1A end register */ + pcrop1aend = FLASH->PCROP1AER; + + /* Configure the Proprietary code readout protection offset */ + if ((PCROPConfig & OB_PCROP_ZONE_A) != 0x00U) + { + /* Compute offset depending on pcrop granularity */ + startoffset = ((PCROP1AStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1AEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone A start offset */ + FLASH->PCROP1ASR = startoffset; + + /* Set Zone A end offset */ + pcrop1aend &= ~FLASH_PCROP1AER_PCROP1A_END; + pcrop1aend |= endoffset; + } + + /* Set RDP erase protection if needed. This bit is only set & will be reset by mass erase */ + if ((PCROPConfig & OB_PCROP_RDP_ERASE) != 0x00U) + { + pcrop1aend |= FLASH_PCROP1AER_PCROP_RDP; + } + + /* set 1A End register */ + FLASH->PCROP1AER = pcrop1aend; +} + +/** + * @brief Configure the 1B Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPB_STRT and PCROPB_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP1BStartAddr Specifies the Zone 1B Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1BEndAddr Specifies the Zone 1B end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1BStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1BStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1BEndAddr)); + + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1BStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1BEndAddr)); + + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP1BStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1BEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone B start offset */ + FLASH->PCROP1BSR = startoffset; + /* Set Zone B end offset */ + FLASH->PCROP1BER = endoffset; +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROPConfig [out] specifies the configuration of PCROP_RDP option. + * @param PCROP1AStartAddr [out] Specifies the address where to copied the start address + * of the 1A Proprietary code readout protection + * @param PCROP1AEndAddr [out] Specifies the address where to copied the end address of + * the 1A Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP1ASR & FLASH_PCROP1ASR_PCROP1A_STRT); + *PCROP1AStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AStartAddr += ropbase; + + pcrop = FLASH->PCROP1AER; + *PCROP1AEndAddr = ((pcrop & FLASH_PCROP1AER_PCROP1A_END) << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); + + *PCROPConfig &= ~OB_PCROP_RDP_ERASE; + *PCROPConfig |= (pcrop & FLASH_PCROP1AER_PCROP_RDP); +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP1BStartAddr [out] Specifies the address where to copied the start address + * of the 1B Proprietary code readout protection + * @param PCROP1BEndAddr [out] Specifies the address where to copied the end address of + * the 1B Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) + { + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif + { + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP1BSR & FLASH_PCROP1BSR_PCROP1B_STRT); + *PCROP1BStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BStartAddr += ropbase; + + pcrop = (FLASH->PCROP1BER & FLASH_PCROP1BER_PCROP1B_END); + *PCROP1BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} + +#if defined(FLASH_DBANK_SUPPORT) +/** + * @brief Configure the 2A Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP2AStartAddr Specifies the Zone 2A Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP2AEndAddr Specifies the Zone 2A end address of the Proprietary code readout protection + * This parameter can be an address between PCROP2AStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP2AConfig(uint32_t PCROP2AStartAddr, uint32_t PCROP2AEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2AStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2AEndAddr)); + + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2AStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2AEndAddr)); + + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP2AStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP2AEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone A start offset */ + FLASH->PCROP2ASR = startoffset; + /* Set Zone A end offset */ + FLASH->PCROP2AER = endoffset; +} + +/** + * @brief Configure the 2B Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROP_STRT and PCROP_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP2BStartAddr Specifies the Zone 2B Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP2BEndAddr Specifies the Zone 2B end address of the Proprietary code readout protection + * This parameter can be an address between PCROP2BStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP2BConfig(uint32_t PCROP2BStartAddr, uint32_t PCROP2BEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2BStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2BEndAddr)); + + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2BStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2BEndAddr)); + + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP2BStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP2BEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone B start offset */ + FLASH->PCROP2BSR = startoffset; + /* Set Zone B end offset */ + FLASH->PCROP2BER = endoffset; +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP2AStartAddr [out] Specifies the address where to copied the start address + * of the 2A Proprietary code readout protection + * @param PCROP2AEndAddr [out] Specifies the address where to copied the end address of + * the 2A Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP2A(uint32_t *PCROP2AStartAddr, uint32_t *PCROP2AEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP2ASR & FLASH_PCROP2ASR_PCROP2A_STRT); + *PCROP2AStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2AStartAddr += ropbase; + + pcrop = (FLASH->PCROP2AER & FLASH_PCROP2AER_PCROP2A_END); + *PCROP2AEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2AEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP2BStartAddr [out] Specifies the address where to copied the start address + * of the 2B Proprietary code readout protection + * @param PCROP2BEndAddr [out] Specifies the address where to copied the end address of + * the 2B Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP2B(uint32_t *PCROP2BStartAddr, uint32_t *PCROP2BEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP2BSR & FLASH_PCROP2BSR_PCROP2B_STRT); + *PCROP2BStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2BStartAddr += ropbase; + + pcrop = (FLASH->PCROP2BER & FLASH_PCROP2BER_PCROP2B_END); + *PCROP2BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2BEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} +#endif +#endif + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +/** + * @brief Configure Securable Memory area feature. + * @param BootEntry specifies if boot scheme is forced to Flash (System or user) or not + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_ENTRY_FORCED_NONE No boot entry forced + * @arg @ref OB_BOOT_ENTRY_FORCED_FLASH Flash selected as unique entry boot + * @param SecSize specifies number of pages to protect as securable memory area, starting from + * beginning of Bank1 (page 0). + * @param SecSize2 specifies number of pages to protect as securable memory area, starting from + * beginning of Bank2 (page 0). + * @retval None + */ +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize, uint32_t SecSize2) +{ + uint32_t secmem; + + /* Check the parameters */ + assert_param(IS_OB_SEC_BOOT_LOCK(BootEntry)); + assert_param(IS_OB_SEC_SIZE(SecSize)); + assert_param(IS_OB_SEC_SIZE(SecSize2)); + + /* Set securable memory area configuration */ + secmem = (FLASH->SECR & ~(FLASH_SECR_BOOT_LOCK | FLASH_SECR_SEC_SIZE | FLASH_SECR_SEC_SIZE2)); + FLASH->SECR = (secmem | BootEntry | SecSize | (SecSize2 << FLASH_SECR_SEC_SIZE2_Pos)); +} + +/** + * @brief Return the FLASH Securable memory area protection Option Bytes value. + * @param BootEntry specifies boot scheme configuration + * @param SecSize specifies number of pages to protect as secure memory area, starting from + * beginning of Bank1 (page 0). + * @param SecSize2 specifies number of pages to protect as secure memory area, starting from + * beginning of Bank2 (page 0). + * @retval None + */ +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize, uint32_t *SecSize2) +{ + uint32_t secmem = FLASH->SECR; + + *BootEntry = (secmem & FLASH_SECR_BOOT_LOCK); + *SecSize = (secmem & FLASH_SECR_SEC_SIZE); + *SecSize2 = (secmem & FLASH_SECR_SEC_SIZE2) >> FLASH_SECR_SEC_SIZE2_Pos; +} + +#else +/** + * @brief Configure Securable Memory area feature. + * @param BootEntry specifies if boot scheme is forced to Flash (System or user) or not + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_ENTRY_FORCED_NONE No boot entry forced + * @arg @ref OB_BOOT_ENTRY_FORCED_FLASH FLash selected as unique entry boot + * @param SecSize specifies number of pages to protect as securable memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize) +{ + uint32_t secmem; + + /* Check the parameters */ + assert_param(IS_OB_SEC_BOOT_LOCK(BootEntry)); + assert_param(IS_OB_SEC_SIZE(SecSize)); + + /* Set securable memory area configuration */ + secmem = (FLASH->SECR & ~(FLASH_SECR_BOOT_LOCK | FLASH_SECR_SEC_SIZE)); + FLASH->SECR = (secmem | BootEntry | SecSize); +} + +/** + * @brief Return the FLASH Securable memory area protection Option Bytes value. + * @param BootEntry specifies boot scheme configuration + * @param SecSize specifies number of pages to protect as secure memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize) +{ + uint32_t secmem = FLASH->SECR; + + *BootEntry = (secmem & FLASH_SECR_BOOT_LOCK); + *SecSize = (secmem & FLASH_SECR_SEC_SIZE); +} +#endif +#endif + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c new file mode 100644 index 0000000..28d1103 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c @@ -0,0 +1,554 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 28 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PF0 and PF1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE (0x00000003u) +#define EXTI_MODE (0x10000000u) +#define GPIO_MODE_IT (0x00010000u) +#define GPIO_MODE_EVT (0x00020000u) +#define RISING_EDGE (0x00100000u) +#define FALLING_EDGE (0x00200000u) +#define GPIO_OUTPUT_TYPE (0x00000010u) + +#define GPIO_NUMBER (16u) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || + (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position); + GPIOx->OTYPER = temp; + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + temp |= ((GPIO_Init->Pull) << (position * 2u)); + GPIOx->PUPDR = temp; + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + temp = EXTI->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << (8u * (position & 0x03u))); + temp |= (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u))); + EXTI->EXTICR[position >> 2u] = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + temp |= iocurrent; + } + EXTI->IMR1 = temp; + + temp = EXTI->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + temp |= iocurrent; + } + EXTI->EMR1 = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = EXTI->EXTICR[position >> 2u]; + tmp &= (0x0FuL << (8u * (position & 0x03u))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR1 &= ~(iocurrent); + EXTI->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR1 &= ~(iocurrent); + EXTI->FTSR1 &= ~(iocurrent); + + tmp = 0x0FuL << (8u * (position & 0x03u)); + EXTI->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + } + + position++; + } +} + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00u) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the pin to be toggled. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_RISING_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_RISING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Rising_Callback(GPIO_Pin); + } + + if (__HAL_GPIO_EXTI_GET_FALLING_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Falling_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Rising_Callback could be implemented in the user file + */ +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Falling_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_hcd.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_hcd.c new file mode 100644 index 0000000..1fddd2d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_hcd.c @@ -0,0 +1,2506 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_hcd.c + * @author MCD Application Team + * @brief HCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#)Declare a HCD_HandleTypeDef handle structure, for example: + HCD_HandleTypeDef hhcd; + + (#)Fill parameters of Init structure in HCD handle + + (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...) + + (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API: + (##) Enable the HCD/USB Low Level interface clock using the following macros + (+++) __HAL_RCC_USB_CLK_ENABLE(); + (##) Initialize the related GPIO clocks + (##) Configure HCD pin-out + (##) Configure HCD NVIC interrupt + + (#)Associate the Upper USB Host stack to the HAL HCD Driver: + (##) hhcd.pData = phost; + + (#)Enable HCD transmission and reception: + (##) HAL_HCD_Start(); + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_HCD_MODULE_ENABLED + + + +/** @defgroup HCD HCD + * @brief HCD HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function ----------------------------------------------------------*/ +/** @defgroup HCD_Private_Functions HCD Private Functions + * @{ + */ +static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); +static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); +static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd); +static void HAL_HCD_ClearPhyChannel(HCD_HandleTypeDef *hhcd); +static uint8_t HAL_HCD_GetLogical_Channel(HCD_HandleTypeDef *hhcd, uint8_t phy_chnum, uint8_t dir); +static uint8_t HAL_HCD_Check_usedChannel(HCD_HandleTypeDef *hhcd, uint8_t ch_num); +static uint8_t HAL_HCD_Get_FreePhyChannel(HCD_HandleTypeDef *hhcd, uint8_t ch_num, uint8_t epnum, uint8_t ep_type); + +static void HCD_HC_IN_BulkDb(HCD_HandleTypeDef *hhcd, uint8_t ch_num, uint8_t phy_chnum, uint32_t regvalue); +static void HCD_HC_OUT_BulkDb(HCD_HandleTypeDef *hhcd, uint8_t ch_num, uint8_t phy_chnum, uint32_t regvalue); +static uint16_t HAL_HCD_GetFreePMA(HCD_HandleTypeDef *hhcd, uint16_t mps); +static HAL_StatusTypeDef HAL_HCD_PMAFree(HCD_HandleTypeDef *hhcd, uint32_t pma_base, uint16_t mps); +static void inline HCD_HC_IN_ISO(HCD_HandleTypeDef *hhcd, uint8_t ch_num, uint8_t phy_chnum, uint32_t regvalue); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HCD_Exported_Functions HCD Exported Functions + * @{ + */ + +/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== +##### Initialization and de-initialization functions ##### +=============================================================================== +[..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd) +{ + /* Check the HCD handle allocation */ + if (hhcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance)); + + if (hhcd->State == HAL_HCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hhcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->SOFCallback = HAL_HCD_SOF_Callback; + hhcd->ConnectCallback = HAL_HCD_Connect_Callback; + hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback; + hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback; + hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback; + hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback; + + if (hhcd->MspInitCallback == NULL) + { + hhcd->MspInitCallback = HAL_HCD_MspInit; + } + + /* Init the low level hardware */ + hhcd->MspInitCallback(hhcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_HCD_MspInit(hhcd); +#endif /* (USE_HAL_HCD_REGISTER_CALLBACKS) */ + } + hhcd->State = HAL_HCD_STATE_BUSY; + + /* Disable the Interrupts */ + (void)__HAL_HCD_DISABLE(hhcd); + + /*Init the Core (common init.) */ + (void)USB_CoreInit(hhcd->Instance, hhcd->Init); + + /* Force Host Mode*/ + (void)USB_SetCurrentMode(hhcd->Instance, USB_HOST_MODE); + + /* Init Host */ + (void)USB_HostInit(hhcd->Instance, hhcd->Init); + + /* Deactivate the power down*/ + hhcd->Instance->CNTR &= ~USB_CNTR_PDWN; + + hhcd->State = HAL_HCD_STATE_READY; + + /*Host Port State*/ + hhcd->HostState = HCD_HCD_STATE_DISCONNECTED; + + /*Init PMA Address */ + (void)HAL_HCD_PMAReset(hhcd); + + hhcd->State = HAL_HCD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initialize a host channel. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number. + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed. + * This parameter can be one of these values: + * HCD_SPEED_HIGH High speed mode, + * HCD_SPEED_FULL Full speed mode, + * HCD_SPEED_LOW Low speed mode + * @param ep_type Endpoint Type. + * This parameter can be one of these values: + * USBH_EP_CONTROL Control type, + * USBH_EP_ISO Isochronous type, + * USBH_EP_BULK Bulk type, + * USBH_EP_INTERRUPT Interrupt type + * @param mps Max Packet Size. + * This parameter can be a value from 0 to32K + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, + uint8_t speed, uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef status; + uint8_t used_channel; + + __HAL_LOCK(hhcd); + + /* Check if the logical channel are already allocated */ + used_channel = HAL_HCD_Check_usedChannel(hhcd, ch_num); + + /*Check if the channel is not already opened */ + if (used_channel == 0U) + { + /*Allocate New Physical channel */ + hhcd->hc[ch_num & 0xFU].phy_ch_num = HAL_HCD_Get_FreePhyChannel(hhcd, ch_num, epnum, ep_type); + + /*if it is not able to allocate channel */ + if (hhcd->hc[ch_num & 0xFU].phy_ch_num == HCD_FREE_CH_NOT_FOUND) + { + return HAL_ERROR; + } + } + /* Channel already opened */ + else + { + /*Get Physical Channel number */ + hhcd->hc[ch_num & 0xFU].phy_ch_num = (used_channel & 0xF0U) >> 4U; + } + + if ((epnum & 0x80U) != 0U) + { + hhcd->hc[ch_num & 0xFU].ch_dir = CH_IN_DIR; + } + else + { + hhcd->hc[ch_num & 0xFU].ch_dir = CH_OUT_DIR; + } + + hhcd->hc[ch_num & 0xFU].dev_addr = dev_address; + hhcd->hc[ch_num & 0xFU].max_packet = mps; + hhcd->hc[ch_num & 0xFU].ep_type = ep_type; + hhcd->hc[ch_num & 0xFU].ep_num = epnum & 0x7FU; + hhcd->hc[ch_num & 0xFU].speed = speed; + + /*Check if the channel is not already opened */ + if (used_channel == 0U) + { + if (((ep_type == EP_TYPE_ISOC) && (hhcd->Init.iso_singlebuffer_enable == 0U)) || + ((ep_type == EP_TYPE_BULK) && (hhcd->Init.bulk_doublebuffer_enable == 1U))) + { + /* PMA Dynamic Allocation */ + status = HAL_HCD_PMAlloc(hhcd, ch_num, HCD_DBL_BUF, mps); + if (status == HAL_ERROR) + { + return HAL_ERROR; + } + } + else + { + /* PMA Dynamic Allocation */ + status = HAL_HCD_PMAlloc(hhcd, ch_num, HCD_SNG_BUF, mps); + if (status == HAL_ERROR) + { + return HAL_ERROR; + } + } + } + + /* Init the USB Channel CHEPRx */ + status = USB_HC_Init(hhcd->Instance, hhcd->hc[ch_num & 0xFU].phy_ch_num, + epnum, dev_address, speed, ep_type, mps); + + /* check single buffer for isochronous channel */ + if (ep_type == EP_TYPE_ISOC) + { + if (hhcd->Init.iso_singlebuffer_enable == 1U) + { + (void)USB_HC_DoubleBuffer(hhcd->Instance, hhcd->hc[ch_num & 0xFU].phy_ch_num, USB_DRD_DBUFF_ENBALE); + } + /*Init Buffer State */ + hhcd->hc[ch_num & 0xFU].pmabuff0_state = USB_PMABUF_EMPTY; + hhcd->hc[ch_num & 0xFU].pmabuff1_state = USB_PMABUF_EMPTY; + } + + /* Bulk double buffer check */ + if (ep_type == EP_TYPE_BULK) + { + if (hhcd->Init.bulk_doublebuffer_enable == 1U) + { + (void)USB_HC_DoubleBuffer(hhcd->Instance, hhcd->hc[ch_num & 0xFU].phy_ch_num, USB_DRD_DBUFF_ENBALE); + } + } + __HAL_UNLOCK(hhcd); + + return status; +} + +/** + * @brief HAL_HCD_HC_Close Pipe + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_Close(HCD_HandleTypeDef *hhcd, uint8_t ch_num) +{ + /* Stop the channel */ + (void) HAL_HCD_HC_Halt(hhcd, ch_num); + + HAL_Delay(3U); + + if (hhcd->hc[ch_num & 0xFU].ch_dir == CH_IN_DIR) + { + /* Free Allocated Channel */ + hhcd->phy_chin_state[hhcd->hc[ch_num & 0xFU].phy_ch_num] = 0U; + } + else + { + /* Free Allocated Channel */ + hhcd->phy_chout_state[hhcd->hc[ch_num & 0xFU].phy_ch_num] = 0U; + } + + /* Reset PMA Channel_Allocation */ + (void)HAL_HCD_PMADeAlloc(hhcd, ch_num); + + return HAL_OK; +} + +/** + * @brief Halt a host channel. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num) +{ + HAL_StatusTypeDef status = HAL_OK; + + __HAL_LOCK(hhcd); + if (hhcd->hc[ch_num & 0xFU].ch_dir == CH_IN_DIR) + { + (void)USB_HC_IN_Halt(hhcd->Instance, (uint8_t) hhcd->hc[ch_num & 0xFU].phy_ch_num); + } + else + { + (void)USB_HC_OUT_Halt(hhcd->Instance, (uint8_t) hhcd->hc[ch_num & 0xFU].phy_ch_num); + } + __HAL_UNLOCK(hhcd); + + return status; +} + +/** + * @brief DeInitialize the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd) +{ + uint8_t idx; + + /* Host Port State */ + hhcd->HostState = HCD_HCD_STATE_DISCONNECTED; + + /* Reset PMA Address */ + (void)HAL_HCD_PMAReset(hhcd); + + for (idx = 0U; idx < hhcd->Init.Host_channels; idx++) + { + hhcd->phy_chin_state[idx] = 0U; + hhcd->phy_chout_state[idx] = 0U; + } + + return HAL_OK; +} + +/** + * @brief Initialize the HCD MSP. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the HCD MSP. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_MspDeInit could be implemented in the user file + */ +} + +__weak void HAL_HCD_SuspendCallback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_SuspendCallback could be implemented in the user file + */ + +} + +__weak void HAL_HCD_ResumeCallback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions + * @brief HCD IO operation functions + * +@verbatim +=============================================================================== +##### IO operation functions ##### +=============================================================================== +[..] This subsection provides a set of functions allowing to manage the USB Host Data +Transfer + +@endverbatim + * @{ + */ + +/** + * @brief Submit a new URB for processing. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @param direction Channel number. + * This parameter can be one of these values: + * 0 : Output / 1 : Input + * @param ep_type Endpoint Type. + * This parameter can be one of these values: + * USBH_EP_CONTROL : Control type/ + * USBH_EP_ISO : Isochronous type/ + * USBH_EP_BULK : Bulk type/ + * USBH_EP_INTERRUPT : Interrupt type/ + * @param token Endpoint Type. + * This parameter can be one of these values: + * 0: HC_PID_SETUP / 1: HC_PID_DATA1 + * @param pbuff pointer to URB data + * @param length Length of URB data + * @param do_ping activate do ping protocol (for high speed only). + * This parameter can be one of these values: + * 0 : do ping inactive / 1 : do ping active + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t direction, uint8_t ep_type, + uint8_t token, uint8_t *pbuff, + uint16_t length, uint8_t do_ping) +{ + UNUSED(do_ping); + + if (token == 0U) + { + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_SETUP; + } + else + { + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA1; + } + + /* Manage Data Toggle */ + switch (ep_type) + { + case EP_TYPE_CTRL: + if ((token == 1U) && (direction == 0U)) /* send data */ + { + if (length == 0U) + { + /* For Status OUT stage, Length==0, Status Out PID = 1 */ + hhcd->hc[ch_num & 0xFU].toggle_out = 1U; + } + + /* Set the Data Toggle bit as per the Flag */ + if (hhcd->hc[ch_num & 0xFU].toggle_out == 0U) + { + /* Put the PID 0 */ + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA0; + } + else + { + /* Put the PID 1 */ + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA1; + } + } + break; + + case EP_TYPE_BULK: + if (direction == 0U) + { + /* Set the Data Toggle bit as per the Flag */ + if (hhcd->hc[ch_num & 0xFU].toggle_out == 0U) + { + /* Put the PID 0 */ + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA0; + } + else + { + /* Put the PID 1 */ + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA1; + } + } + else + { + if (hhcd->hc[ch_num & 0xFU].toggle_in == 0U) + { + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA0; + } + else + { + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA1; + } + } + break; + + case EP_TYPE_INTR: + if (direction == 0U) + { + /* Set the Data Toggle bit as per the Flag */ + if (hhcd->hc[ch_num & 0xFU].toggle_out == 0U) + { + /* Put the PID 0 */ + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA0; + } + else + { + /* Put the PID 1 */ + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA1; + } + } + else + { + if (hhcd->hc[ch_num & 0xFU].toggle_in == 0U) + { + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA0; + } + else + { + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA1; + } + } + break; + + case EP_TYPE_ISOC: + hhcd->hc[ch_num & 0xFU].data_pid = HC_PID_DATA0; + break; + + default: + break; + } + + hhcd->hc[ch_num & 0xFU].xfer_buff = pbuff; + hhcd->hc[ch_num & 0xFU].xfer_len = length; + hhcd->hc[ch_num & 0xFU].xfer_len_db = length; + hhcd->hc[ch_num & 0xFU].urb_state = URB_IDLE; + hhcd->hc[ch_num & 0xFU].xfer_count = 0U; + hhcd->hc[ch_num & 0xFU].state = HC_IDLE; + + return USB_HC_StartXfer(hhcd->Instance, &hhcd->hc[ch_num & 0xFU]); +} +/** + * @brief Handle HCD interrupt request. + * @param hhcd HCD handle + * @retval None + */ +void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd) +{ + uint8_t phy_chnum; + uint8_t chnum; + uint32_t epch_reg; + + /* Port Change Detected (Connection/Disconnection) */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_DCON)) + { + /* Clear Flag */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_DCON); + + /* Call Port IRQHandler */ + HCD_Port_IRQHandler(hhcd); + } + + /* Correct Transaction Detected -------*/ + if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_CTR)) + { + /* Handle Host channel Interrupt */ + for (phy_chnum = 0U; phy_chnum < hhcd->Init.Host_channels; phy_chnum++) + { + if ((HCD_GET_CHANNEL(hhcd->Instance, phy_chnum) &USB_CH_VTRX) != 0U) + { + /* Get Logical channel to check if the channel is already opened */ + chnum = HAL_HCD_GetLogical_Channel(hhcd, phy_chnum, 1U); + + if (chnum != HCD_LOGICAL_CH_NOT_OPENED) + { + /* Call Channel_IN_IRQ() */ + HCD_HC_IN_IRQHandler(hhcd, chnum); + } + else + { + /*Channel was not closed correctly still have interrupt */ + epch_reg = HCD_GET_CHANNEL(hhcd->Instance, phy_chnum); + epch_reg = (epch_reg & (USB_CHEP_REG_MASK & (~USB_CH_ERRRX) & (~USB_CH_VTRX))) | + (USB_CH_VTTX | USB_CH_ERRTX); + + HCD_SET_CHANNEL(hhcd->Instance, phy_chnum, epch_reg); + } + } + + if ((HCD_GET_CHANNEL(hhcd->Instance, phy_chnum) &USB_CH_VTTX) != 0U) + { + /*Get Logical channel to check if the channel is already opened*/ + chnum = HAL_HCD_GetLogical_Channel(hhcd, phy_chnum, 0U); + + if (chnum != HCD_LOGICAL_CH_NOT_OPENED) + { + /*Call Channel_OUT_IRQ()*/ + HCD_HC_OUT_IRQHandler(hhcd, chnum); + } + else + { + /*Clear Error & unwanted VTTX or Channel was not closed correctly */ + epch_reg = HCD_GET_CHANNEL(hhcd->Instance, phy_chnum); + epch_reg = (epch_reg & (USB_CHEP_REG_MASK & (~USB_CH_ERRTX) & (~USB_CH_VTTX))) | + (USB_CH_VTRX | USB_CH_ERRRX); + + HCD_SET_CHANNEL(hhcd->Instance, phy_chnum, epch_reg); + } + } + } + + /* Clear Correct Transfer */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_CTR); + + } + + /* Wakeup Flag Detected */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_WKUP)) + { + if (hhcd->HostState == HCD_HCD_STATE_SUSPEND) + { + /* Set The L2Resume bit */ + hhcd->Instance->CNTR |= USB_CNTR_L2RES; + + /* Clear the wake-up flag */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_WKUP); + + /* Update the USB Software state machine */ + HAL_HCD_ResumeCallback(hhcd); + hhcd->HostState = HCD_HCD_STATE_RESUME; + } + else + { + /*Clear the wake-up flag*/ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_WKUP); + } + } + + /*Global Error Flag Detected */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_ERR)) + { + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_ERR); + } + + /* PMA Overrun detected */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_PMAOVR)) + { + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_PMAOVR); + } + + /* Suspend Detected */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_SUSP)) + { + /*Set HAL State to Suspend */ + hhcd->HostState = HCD_HCD_STATE_SUSPEND; + + /* Force low-power mode in the macrocell */ + hhcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_SUSP); + + /*Call suspend Callback*/ + HAL_HCD_SuspendCallback(hhcd); + } + + /*Start Of Frame Detected */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_SOF)) + { +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->SOFCallback(hhcd); +#else + HAL_HCD_SOF_Callback(hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + + __HAL_HCD_CLEAR_FLAG(hhcd, USB_ISTR_SOF); + + /* when first SOF is detected after USB_RESET is asserted */ + if (hhcd->HostState == HCD_HCD_STATE_RESETED) + { + /* HAL State */ + hhcd->HostState = HCD_HCD_STATE_RUN; + HAL_HCD_PortEnabled_Callback(hhcd); + } + } +} + +/** + * @brief SOF callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_SOF_Callback could be implemented in the user file + */ +} + +/** + * @brief Connection Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_Connect_Callback could be implemented in the user file + */ +} + +/** + * @brief Disconnection Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_Disconnect_Callback could be implemented in the user file + */ +} +/** + * @brief Port Enabled Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_Disconnect_Callback could be implemented in the user file + */ +} +/** + * @brief Port Disabled Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_Disconnect_Callback could be implemented in the user file + */ +} + +/** + * @brief Notify URB state change callback. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @param urb_state + * This parameter can be one of these values: + * URB_IDLE/ + * URB_DONE/ + * URB_NOTREADY/ + * URB_NYET/ + * URB_ERROR/ + * URB_STALL/ + * @retval None + */ +__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, + uint8_t chnum, HCD_URBStateTypeDef urb_state) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + UNUSED(chnum); + UNUSED(urb_state); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file + */ +} +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB HCD Callback + * To be used instead of the weak predefined callback + * @param hhcd USB HCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID + * @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID + * @arg @ref HAL_HCD_DISCONNECT_CB_ID HCD Disconnect callback ID + * @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enable callback ID + * @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disable callback ID + * @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, + HAL_HCD_CallbackIDTypeDef CallbackID, + pHCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hhcd); + + if (hhcd->State == HAL_HCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_HCD_SOF_CB_ID : + hhcd->SOFCallback = pCallback; + break; + + case HAL_HCD_CONNECT_CB_ID : + hhcd->ConnectCallback = pCallback; + break; + + case HAL_HCD_DISCONNECT_CB_ID : + hhcd->DisconnectCallback = pCallback; + break; + + case HAL_HCD_PORT_ENABLED_CB_ID : + hhcd->PortEnabledCallback = pCallback; + break; + + case HAL_HCD_PORT_DISABLED_CB_ID : + hhcd->PortDisabledCallback = pCallback; + break; + + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = pCallback; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hhcd->State == HAL_HCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = pCallback; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + return status; +} + +/** + * @brief Unregister an USB HCD Callback + * USB HCD callback is redirected to the weak predefined callback + * @param hhcd USB HCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID + * @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID + * @arg @ref HAL_HCD_DISCONNECT_CB_ID DRD HCD Disconnect callback ID + * @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enabled callback ID + * @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disabled callback ID + * @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, + HAL_HCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hhcd); + + /* Setup Legacy weak Callbacks */ + if (hhcd->State == HAL_HCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_HCD_SOF_CB_ID : + hhcd->SOFCallback = HAL_HCD_SOF_Callback; + break; + + case HAL_HCD_CONNECT_CB_ID : + hhcd->ConnectCallback = HAL_HCD_Connect_Callback; + break; + + case HAL_HCD_DISCONNECT_CB_ID : + hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback; + break; + + case HAL_HCD_PORT_ENABLED_CB_ID : + hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback; + break; + + case HAL_HCD_PORT_DISABLED_CB_ID : + hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback; + break; + + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = HAL_HCD_MspInit; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hhcd->State == HAL_HCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = HAL_HCD_MspInit; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + return status; +} + +/** + * @brief Register USB HCD Host Channel Notify URB Change Callback + * To be used instead of the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback + * @param hhcd HCD handle + * @param pCallback pointer to the USB HCD Host Channel Notify URB Change Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, + pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hhcd); + + if (hhcd->State == HAL_HCD_STATE_READY) + { + hhcd->HC_NotifyURBChangeCallback = pCallback; + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + + return status; +} + +/** + * @brief Unregister the USB HCD Host Channel Notify URB Change Callback + * USB HCD Host Channel Notify URB Change Callback is redirected + * to the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hhcd); + + if (hhcd->State == HAL_HCD_STATE_READY) + { + hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + + return status; +} +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions + * @brief Management functions + * +@verbatim +=============================================================================== +##### Peripheral Control functions ##### +=============================================================================== +[..] +This subsection provides a set of functions allowing to control the HCD data +transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd) +{ + __HAL_LOCK(hhcd); + + /*Set the PullDown on the PHY */ + hhcd->Instance->BCDR |= USB_BCDR_DPPD; + + /* Clear Reset */ + hhcd->Instance->CNTR &= ~USB_CNTR_USBRST; + + /*Remove PowerDown */ + hhcd->Instance->CNTR &= ~USB_CNTR_PDWN; + + __HAL_UNLOCK(hhcd); + + return HAL_OK; +} + +/** + * @brief Stop the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd) +{ + __HAL_LOCK(hhcd); + /*Stop the Host IP: setting powerdown */ + (void)USB_StopHost(hhcd->Instance); + + /* clear all allocated virtual channel */ + HAL_HCD_ClearPhyChannel(hhcd); + + /* Reset the PMA current pointer */ + (void)HAL_HCD_PMAReset(hhcd); + + __HAL_UNLOCK(hhcd); + return HAL_OK; +} + +/** + * @brief Put the Device in suspend mode + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_Suspend(HCD_HandleTypeDef *hhcd) +{ + uint32_t count = 0U; + + /* Set Suspend Mode */ + hhcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + /* wait for Suspend Ready */ + while ((hhcd->Instance->CNTR & USB_CNTR_SUSPRDY) == 0U) + { + if (++count > 0xFFFFFFU) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Resume host port + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_Resume(HCD_HandleTypeDef *hhcd) +{ + /* Set Resume bit */ + hhcd->Instance->CNTR |= USB_CNTR_L2RES; + + return HAL_OK; +} + +/** + * @brief Reset the host port. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd) +{ + __HAL_LOCK(hhcd); + + /* Reset the USB Port by inserting an SE0 on the bus */ + (void)USB_ResetPort(hhcd->Instance); + + if (hhcd->HostState == HCD_HCD_STATE_CONNECTED) + { + hhcd->HostState = HCD_HCD_STATE_RESETED; + } + __HAL_UNLOCK(hhcd); + + return HAL_OK; +} + +/** + * @brief Resme the host port. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_ResumePort(HCD_HandleTypeDef *hhcd) +{ + /* Set Resume bit */ + hhcd->Instance->CNTR |= USB_CNTR_L2RES; + HAL_Delay(30U); + + /* Clear Resume bit */ + hhcd->Instance->CNTR &= ~USB_CNTR_L2RES; + + return HAL_OK; +} + + +/** + * @} + */ + +/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim +=============================================================================== +##### Peripheral State functions ##### +=============================================================================== +[..] +This subsection permits to get in run-time the status of the peripheral +and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the HCD handle state. + * @param hhcd HCD handle + * @retval HAL state + */ +HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd) +{ + return hhcd->State; +} + +/** + * @brief Return URB state for a channel. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval URB state. + * This parameter can be one of these values: + * URB_IDLE/ + * URB_DONE/ + * URB_NOTREADY/ + * URB_NYET/ + * URB_ERROR/ + * URB_STALL + */ +HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum) +{ + return hhcd->hc[chnum].urb_state; +} + + +/** + * @brief Return the last host transfer size. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval last transfer size in byte + */ +uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum) +{ + return hhcd->hc[chnum].xfer_count; +} + +/** + * @brief Return the Host Channel state. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval Host channel state + * This parameter can be one of these values: + * HC_IDLE/ + * HC_XFRC/ + * HC_HALTED/ + * HC_NYET/ + * HC_NAK/ + * HC_STALL/ + * HC_XACTERR/ + * HC_BBLERR/ + * HC_DATATGLERR + */ +HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum) +{ + return hhcd->hc[chnum].state; +} + +/** + * @brief Return the current Host frame number. + * @param hhcd HCD handle + * @retval Current Host frame number + */ +uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd) +{ + return (USB_GetCurrentFrame(hhcd->Instance)); +} + +/** + * @brief Return the Host enumeration speed. + * @param hhcd HCD handle + * @retval Enumeration speed + */ +uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd) +{ + return (USB_GetHostSpeed(hhcd->Instance)); +} + +/** + * @brief Handle Host Channel OUT Double Buffer Bulk requests. + * @param hhcd HCD handle + * @param ch_num Channel number This parameter can be a value from 1 to 15 + * @param phy_chnum Physical Channel number [0..7] + * @param regvalue contain Snapshot of the EPCHn register when ISR is detected + * @retval none + */ +static void HCD_HC_OUT_BulkDb(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t phy_chnum, uint32_t regvalue) +{ + uint16_t data_xfr; + uint16_t len; + + /* Send Buffer0 */ + if ((regvalue & USB_CH_DTOG_TX) != 0U) + { + data_xfr = (uint16_t)(((USB_DRD_PMA_BUFF + phy_chnum)->TXBD & 0x03FF0000U) >> 16U); + + if (hhcd->hc[ch_num & 0xFU].xfer_len >= data_xfr) + { + hhcd->hc[ch_num & 0xFU].xfer_len -= data_xfr; + } + else + { + hhcd->hc[ch_num & 0xFU].xfer_len = 0U; + } + + /* Transfer no yet finished only one packet of mps is transferred and ACKed from device */ + if (hhcd->hc[ch_num & 0xFU].xfer_len != 0U) + { + /* manage multiple Xfer */ + hhcd->hc[ch_num & 0xFU].xfer_count += data_xfr; + + /* check if we need to free user buffer */ + if ((regvalue & USB_CH_DTOG_RX) != 0U) + { + /* Toggle SwBuff */ + HCD_FreeUserBuffer(hhcd->Instance, phy_chnum, 1U); + } + + /* hhcd->hc[ch_num&0xFU].xfer_len_db==0 ==> when all data are written in the PMA to yet transferred */ + if (hhcd->hc[ch_num & 0xFU].xfer_len_db > 0U) /* Still data to fill in the buffer */ + { + hhcd->hc[ch_num & 0xFU].xfer_buff += data_xfr; + + /* calculate len of new buffer to fill */ + if (hhcd->hc[ch_num & 0xFU].xfer_len_db > hhcd->hc[ch_num & 0xFU].max_packet) + { + len = (uint16_t)hhcd->hc[ch_num & 0xFU].max_packet; + hhcd->hc[ch_num & 0xFU].xfer_len_db -= len; + } + else + { + len = (uint16_t)hhcd->hc[ch_num & 0xFU].xfer_len_db; + hhcd->hc[ch_num & 0xFU].xfer_len_db = 0U; /* end of fill buffer */ + } + + /* Write remaining data to Buffer0 */ + HCD_SET_CH_TX_CNT(hhcd->Instance, phy_chnum, (uint16_t)len); + USB_WritePMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaaddr0, (uint16_t)len); + } + /* start a new transfer */ + HCD_SET_CH_TX_STATUS(hhcd->Instance, phy_chnum, USB_CH_TX_VALID); + } + else + { + /* Transfer complete state */ + hhcd->hc[ch_num & 0xFU].xfer_count += data_xfr; + hhcd->hc[ch_num & 0xFU].state = HC_XFRC; + hhcd->hc[ch_num & 0xFU].urb_state = URB_DONE; + hhcd->hc[ch_num & 0xFU].toggle_out ^= 1U; + /* Close the Channel */ + HCD_SET_CH_TX_STATUS(hhcd->Instance, phy_chnum, USB_CH_TX_DIS); + } + } + else + { + /* Send Buffer1 */ + data_xfr = (uint16_t)(((USB_DRD_PMA_BUFF + phy_chnum)->RXBD & 0x03FF0000U) >> 16U); + + if (hhcd->hc[ch_num & 0xFU].xfer_len >= data_xfr) /* updated */ + { + hhcd->hc[ch_num & 0xFU].xfer_len -= data_xfr; + } + + /* Transfer no yet finished only one packet of mps is transferred and ACKed from device */ + if (hhcd->hc[ch_num & 0xFU].xfer_len != 0U) + { + /* manage multiple Xfer */ + hhcd->hc[ch_num & 0xFU].xfer_count += data_xfr; + + /* check if we need to free user buffer */ + if ((regvalue & USB_CH_DTOG_RX) == 0U) + { + /* Toggle SwBuff */ + HCD_FreeUserBuffer(hhcd->Instance, phy_chnum, 1U); + } + + /* hhcd->hc[ch_num&0xFU].xfer_len_db==0 ==> when all data are written in the PMA to yet transferred */ + if (hhcd->hc[ch_num & 0xFU].xfer_len_db > 0U) /* Still data to fill in the buffer */ + { + hhcd->hc[ch_num & 0xFU].xfer_buff += data_xfr; + + /* calculate len of new buffer to fill */ + if (hhcd->hc[ch_num & 0xFU].xfer_len_db > hhcd->hc[ch_num & 0xFU].max_packet) + { + len = hhcd->hc[ch_num & 0xFU].max_packet; + hhcd->hc[ch_num & 0xFU].xfer_len_db -= len; + } + else + { + len = (uint16_t)hhcd->hc[ch_num & 0xFU].xfer_len_db; + hhcd->hc[ch_num & 0xFU].xfer_len_db = 0U; /* end of fill buffer */ + } + + /* Write remaining data to Buffer0 */ + HCD_SET_CH_DBUF1_CNT(hhcd->Instance, phy_chnum, 0U, (uint16_t)len); + + USB_WritePMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaaddr1, (uint16_t)len); + } + /* start a new transfer */ + HCD_SET_CH_TX_STATUS(hhcd->Instance, phy_chnum, USB_CH_TX_VALID); + } + else + { + /* Transfer complete state */ + hhcd->hc[ch_num & 0xFU].xfer_count += data_xfr; + hhcd->hc[ch_num & 0xFU].state = HC_XFRC; + hhcd->hc[ch_num & 0xFU].urb_state = URB_DONE; + hhcd->hc[ch_num & 0xFU].toggle_out ^= 1U; + /* Close the channel */ + HCD_SET_CH_TX_STATUS(hhcd->Instance, phy_chnum, USB_CH_TX_DIS); + } + } +} + + +/** + * @brief Handle Host Channel IN Isochronous Transaction + * @param hhcd HCD handle + * @param ch_num Channel number: This parameter can be a value from 1 to 15 + * @param phy_chnum Physical Channel number [0..7] + * @param regvalue contain Snapshot of the EPCHn register when ISR is detected + * @retval none + */ +static void inline HCD_HC_IN_ISO(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t phy_chnum, uint32_t regvalue) +{ + /* Check if Double buffer isochronous */ + if ((regvalue & USB_CH_KIND) == 0U) + { + /* Read from Buffer0 */ + if ((regvalue & USB_CH_DTOG_RX) != 0U) + { + /* Get number of Received byte in buffer0 */ + hhcd->hc[ch_num & 0xFU].xfer_count = HCD_GET_CH_DBUF0_CNT(hhcd->Instance, phy_chnum); + + if (hhcd->hc[ch_num & 0xFU].xfer_count != 0U) + { + /* Read from Buffer0 */ + USB_ReadPMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaaddr0, + (uint16_t)hhcd->hc[ch_num & 0xFU].xfer_count); + + hhcd->hc[ch_num & 0xFU].urb_state = URB_DONE; + } + } + else + { + /* Get number of Received byte in buffer1 */ + hhcd->hc[ch_num & 0xFU].xfer_count = HCD_GET_CH_DBUF1_CNT(hhcd->Instance, phy_chnum); + + if (hhcd->hc[ch_num & 0xFU].xfer_count != 0U) + { + /* Read from Buffer1 */ + USB_ReadPMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaaddr1, + (uint16_t)hhcd->hc[ch_num & 0xFU].xfer_count); + + hhcd->hc[ch_num & 0xFU].urb_state = URB_DONE; + } + } + } + else /* single buffer isochronous */ + { + /* Get Control Data OUT Packet*/ + hhcd->hc[ch_num & 0xFU].xfer_count = HCD_GET_CH_RX_CNT(hhcd->Instance, phy_chnum); + if (hhcd->hc[ch_num & 0xFU].xfer_count != 0U) + { + USB_ReadPMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaadress, + (uint16_t)hhcd->hc[ch_num & 0xFU].xfer_count); + + hhcd->hc[ch_num & 0xFU].urb_state = URB_DONE; + } + } + + /* Transfer complete state */ + hhcd->hc[ch_num & 0xFU].state = HC_XFRC; + + /* Clear VTRX */ + HCD_CLEAR_RX_CH_CTR(hhcd->Instance, phy_chnum); + +} +/** + * @brief Handle Host Channel IN Double Buffer Bulk requests. + * @param hhcd HCD handle + * @param ch_num Channel number: This parameter can be a value from 1 to 15 + * @param phy_chnum Physical Channel number [0..7] + * @param regvalue contain Snapshot of the EPCHn register when ISR is detected + * @retval none + */ +static void HCD_HC_IN_BulkDb(HCD_HandleTypeDef *hhcd, + uint8_t ch_num, uint8_t phy_chnum, uint32_t regvalue) +{ + uint16_t received_bytes; + + /* Read from Buffer 0 */ + if ((regvalue & USB_CH_DTOG_RX) != 0U) + { + received_bytes = (uint16_t)HCD_GET_CH_DBUF0_CNT(hhcd->Instance, phy_chnum); + + if (hhcd->hc[ch_num & 0xFU].xfer_len <= received_bytes) + { + hhcd->hc[ch_num & 0xFU].xfer_len = 0U; + } + else + { + hhcd->hc[ch_num & 0xFU].xfer_len -= received_bytes; + } + /* Check if we Need to free the other buffer for the IP */ + if ((hhcd->hc[ch_num & 0xFU].xfer_len != 0U) && ((regvalue & USB_CH_DTOG_TX) != 0U)) + { + /* Toggle SwBuff */ + HCD_FreeUserBuffer(hhcd->Instance, phy_chnum, 0U);/* Allow the IP to submit a new IN */ + } + /* Read the byte from PMA to user Buffer(System Memory) */ + USB_ReadPMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaaddr0, (uint16_t)received_bytes); + } + else + { + /* Read from Buffer 1 */ + received_bytes = (uint16_t) HCD_GET_CH_DBUF1_CNT(hhcd->Instance, phy_chnum); + + if (hhcd->hc[ch_num & 0xFU].xfer_len <= received_bytes) + { + hhcd->hc[ch_num & 0xFU].xfer_len = 0U; + } + else + { + hhcd->hc[ch_num & 0xFU].xfer_len -= received_bytes; + } + + /* Check if we Need to free the other buffer for the IP */ + if ((hhcd->hc[ch_num & 0xFU].xfer_len != 0U) && ((regvalue & USB_CH_DTOG_TX) == 0U)) + { + /* Toggle SwBuff */ + HCD_FreeUserBuffer(hhcd->Instance, phy_chnum, 0U); + } + + /* Read the byte from PMA to user Buffer(System Memory) */ + USB_ReadPMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaaddr1, (uint16_t)received_bytes); + } + + /* update the global number of all received bytes */ + hhcd->hc[ch_num & 0xFU].xfer_count += received_bytes; + + /* Transfer complete state */ + hhcd->hc[ch_num & 0xFU].state = HC_ACK; + hhcd->hc[ch_num & 0xFU].ErrCnt = 0U; + + if ((hhcd->hc[ch_num & 0xFU].xfer_len == 0U) || + ((received_bytes < hhcd->hc[ch_num & 0xFU].max_packet))) + { + hhcd->hc[ch_num & 0xFU].urb_state = URB_DONE; + hhcd->hc[ch_num & 0xFU].state = HC_XFRC; + + /* disable channel */ + HCD_SET_CH_RX_STATUS(hhcd->Instance, phy_chnum, USB_CH_RX_DIS); + } + else + { + hhcd->hc[ch_num & 0xFU].xfer_buff += received_bytes; + + /* Reactivate the Channel Submit an other URB since the Transfer is not yet completed */ + HCD_SET_CH_RX_STATUS(hhcd->Instance, phy_chnum, USB_CH_RX_STRX); + } +} + +/** + * @brief Handle Host Channel IN interrupt requests. + * @param hhcd HCD handle + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @retval none + */ +static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t ch_num) +{ + uint16_t received_bytes; + uint8_t phy_chnum = (uint8_t)__HAL_HCD_GET_CHNUM(hhcd); + + /*Take a Flag snapshot from the CHEP register, due to STRX bits are used for both control and status */ + uint32_t ch_reg = HCD_GET_CHANNEL(hhcd->Instance, phy_chnum); + + /* Manage Correct Transaction */ + if ((ch_reg & USB_CH_ERRRX) == 0U) + { + /* Isochronous Channel */ + if ((ch_reg & USB_CH_UTYPE) == USB_EP_ISOCHRONOUS) + { + HCD_HC_IN_ISO(hhcd, ch_num, phy_chnum, ch_reg); + } + else + { + /* manage ACK response single buffer */ + if (((ch_reg) & USB_CH_RX_STRX) == USB_CH_RX_ACK_SBUF) + { + /* Get Control Data OUT Packet */ + received_bytes = (uint16_t)HCD_GET_CH_RX_CNT(hhcd->Instance, phy_chnum); + + /* Read the byte from PMA to user Buffer(System Memory) */ + USB_ReadPMA(hhcd->Instance, hhcd->hc[ch_num & 0xFU].xfer_buff, + hhcd->hc[ch_num & 0xFU].pmaadress, (uint16_t)received_bytes); + + /* update the global number of all received bytes */ + hhcd->hc[ch_num & 0xFU].xfer_count += received_bytes; + + /* Transfer complete state */ + hhcd->hc[ch_num & 0xFU].state = HC_ACK; + hhcd->hc[ch_num & 0xFU].ErrCnt = 0U; + if (hhcd->hc[ch_num & 0xFU].xfer_len <= received_bytes) + { + hhcd->hc[ch_num & 0xFU].xfer_len = 0U; + } + else + { + hhcd->hc[ch_num & 0xFU].xfer_len -= received_bytes; + } + if ((hhcd->hc[ch_num & 0xFU].xfer_len == 0U) || + ((received_bytes < hhcd->hc[ch_num & 0xFU].max_packet))) + { + hhcd->hc[ch_num & 0xFU].urb_state = URB_DONE; + hhcd->hc[ch_num & 0xFU].state = HC_XFRC; + } + else + { + hhcd->hc[ch_num & 0xFU].xfer_buff += received_bytes; + + /* Reactivate the Channel to Submit another URB since the Transfer is not yet completed */ + HCD_SET_CH_RX_STATUS(hhcd->Instance, phy_chnum, USB_CH_RX_STRX); + } + if ((hhcd->hc[ch_num & 0xFU].ep_type == EP_TYPE_BULK) || + (hhcd->hc[ch_num & 0xFU].ep_type == EP_TYPE_INTR)) + { + hhcd->hc[ch_num & 0xFU].toggle_out ^= 1U; + } + } + + /* manage NACK Response */ + else if (((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_NAK) + && (hhcd->hc[ch_num & 0xFU].urb_state != URB_DONE)) + { + hhcd->hc[ch_num & 0xFU].urb_state = URB_NOTREADY; + hhcd->hc[ch_num & 0xFU].ErrCnt = 0U; + hhcd->hc[ch_num & 0xFU].state = HC_NAK; + } + + /* manage STALL Response */ + else if ((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_STALL) + { + (void)HAL_HCD_HC_Halt(hhcd, (uint8_t)ch_num); + hhcd->hc[ch_num & 0xFU].state = HC_STALL; + hhcd->hc[ch_num & 0xFU].urb_state = URB_STALL; + + /* Close the channel */ + HCD_SET_CH_RX_STATUS(hhcd->Instance, phy_chnum, USB_CH_RX_DIS); + } + + /* Double Buffer Management in case of Bulk Transaction */ + else if (((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_ACK_DBUF) + && ((ch_reg & USB_CH_KIND) != 0U)) + { + /* Bulk IN Double Buffer ISR */ + HCD_HC_IN_BulkDb(hhcd, ch_num, phy_chnum, ch_reg); + } + else + { + /*....*/ + /* not defined state: STRX=11 in single buffer no iso is not defined */ + } + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, + hhcd->hc[ch_num & 0xFU].urb_state); + + /*Clear VTRX */ + HCD_CLEAR_RX_CH_CTR(hhcd->Instance, phy_chnum); + } + } + else /* Error detected during last transaction */ + { + /* Set URB Error State */ + hhcd->hc[ch_num & 0xFU].urb_state = URB_NOTREADY; + hhcd->hc[ch_num & 0xFU].ErrCnt++; + hhcd->hc[ch_num & 0xFU].state = HC_XACTERR; + + /* Clear VTTRX & ERR_RX */ + HCD_CLEAR_RX_CH_ERR(hhcd->Instance, phy_chnum); + + /* Check Error number */ + if (hhcd->hc[ch_num & 0xFU].ErrCnt > 3U) + { + hhcd->hc[ch_num & 0xFU].urb_state = URB_ERROR; + HCD_SET_CH_RX_STATUS(hhcd->Instance, phy_chnum, USB_CH_RX_DIS); + + /* Clear pending err_tx */ + HCD_CLEAR_RX_CH_ERR(hhcd->Instance, phy_chnum); + } + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, + hhcd->hc[ch_num & 0xFU].urb_state); + } +} + + +/** + * @brief Handle Host Channel OUT interrupt requests. + * @param hhcd HCD handle + * @param chnum Channel number + * This parameter can be a value from 1 to 15 + * @retval none + */ +static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) +{ + uint16_t data_xfr; + + /* Get Physical Channel number */ + uint32_t phy_chnum = (uint8_t)__HAL_HCD_GET_CHNUM(hhcd); + + /* Take a Flag snapshot from the CHEP register, due to STRX bits are used for both control &status */ + __IO uint32_t ch_reg = *(__IO uint32_t *)(&(hhcd->Instance->CHEP0R) + phy_chnum); + + /*------ Manage Correct Transaction ------*/ + if ((ch_reg & USB_CH_ERRTX) == 0U) + { + /* Handle Isochronous channel */ + if ((ch_reg & USB_CH_UTYPE) == USB_EP_ISOCHRONOUS) + { + /* correct transaction */ + if ((hhcd->Instance->ISTR & USB_ISTR_ERR) == 0U) + { + /* Double buffer isochronous out*/ + if ((ch_reg & USB_CH_KIND) == 0U) + { + /* Odd Transaction */ + if ((ch_reg & USB_CH_DTOG_TX) != 0U) + { + hhcd->hc[chnum & 0xFU].pmabuff0_state = USB_PMABUF_EMPTY; + } + /* Even Transaction */ + else + { + hhcd->hc[chnum & 0xFU].pmabuff1_state = USB_PMABUF_EMPTY; + } + } + else /* single buffer isochronous out */ + { + HCD_SET_CH_TX_CNT(hhcd->Instance, phy_chnum, (uint16_t)0U); + } + + /* Transfer complete state */ + hhcd->hc[chnum & 0xFU].state = HC_XFRC; + hhcd->hc[chnum & 0xFU].urb_state = URB_DONE; + } + + /*Clear Correct Transfer */ + HCD_CLEAR_TX_CH_CTR(hhcd->Instance, phy_chnum); + } + else /* Manage all Non Isochronous Transaction */ + { + /* Check ACK response */ + if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_ACK_SBUF) + { + data_xfr = (uint16_t)(((USB_DRD_PMA_BUFF + phy_chnum)->TXBD & 0x03FF0000U) >> 16U); + + if (hhcd->hc[chnum & 0xFU].xfer_len >= data_xfr) + { + hhcd->hc[chnum & 0xFU].xfer_len -= data_xfr; + } + else + { + hhcd->hc[chnum & 0xFU].xfer_len = 0U; + } + + /* Transfer no yet finished only one packet of mps is transferred and ACKed from device */ + if (hhcd->hc[chnum & 0xFU].xfer_len != 0U) + { + /* manage multiple Xfer */ + hhcd->hc[chnum & 0xFU].xfer_buff += data_xfr; + hhcd->hc[chnum & 0xFU].xfer_count += data_xfr; + + /* start a new transfer */ + (void) USB_HC_StartXfer(hhcd->Instance, &hhcd->hc[chnum & 0xFU]); + } + else + { + /* Transfer complete */ + hhcd->hc[chnum & 0xFU].xfer_count += data_xfr; + hhcd->hc[chnum & 0xFU].state = HC_XFRC; + hhcd->hc[chnum & 0xFU].urb_state = URB_DONE; + if ((hhcd->hc[chnum & 0xFU].ep_type == EP_TYPE_BULK) || + (hhcd->hc[chnum & 0xFU].ep_type == EP_TYPE_INTR)) + { + hhcd->hc[chnum & 0xFU].toggle_out ^= 1U; + } + } + } + + /* Check NACK Response */ + else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_NAK) + { + hhcd->hc[chnum & 0xFU].urb_state = URB_NOTREADY; + hhcd->hc[chnum & 0xFU].ErrCnt = 0U; + hhcd->hc[chnum & 0xFU].state = HC_NAK; + } + + /*Check STALL Response*/ + else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_STALL) + { + (void) HAL_HCD_HC_Halt(hhcd, (uint8_t)chnum); + hhcd->hc[chnum & 0xFU].state = HC_STALL; + hhcd->hc[chnum & 0xFU].urb_state = URB_STALL; + } + + /*Check double buffer ACK in case of bulk transaction */ + else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_ACK_DBUF) + { + /*Double buffer management Bulk Out*/ + (void) HCD_HC_OUT_BulkDb(hhcd, chnum, (uint8_t)phy_chnum, ch_reg); + } + else + { + /*...*/ + } + + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)chnum, + hhcd->hc[chnum & 0xFU].urb_state); + HCD_CLEAR_TX_CH_CTR(hhcd->Instance, phy_chnum); + } /* end no isochronous */ + } + + /*------ Manage Transaction Error------*/ + else + { + hhcd->hc[chnum & 0xFU].ErrCnt++; + if (hhcd->hc[chnum & 0xFU].ErrCnt > 3U) + { + HCD_SET_CH_TX_STATUS(hhcd->Instance, phy_chnum, USB_CH_TX_DIS); + hhcd->hc[chnum & 0xFU].urb_state = URB_ERROR; + } + else + { + hhcd->hc[chnum & 0xFU].urb_state = URB_NOTREADY; + } + + hhcd->hc[chnum & 0xFU].state = HC_XACTERR; + + /*Clear ERR_TX*/ + HCD_CLEAR_TX_CH_ERR(hhcd->Instance, phy_chnum); + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)chnum, + hhcd->hc[chnum & 0xFU].urb_state); + } +} + + +/** + * @brief Handle Host Port interrupt requests. + * @param hhcd HCD handle + * @retval None + */ +static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd) +{ + /* J-state detected & LastState=Disconnected */ + if (((hhcd->Instance->FNR & USB_FNR_RXDP) != 0U) && + ((hhcd->HostState == HCD_HCD_STATE_DISCONNECTED) != 0U)) + { + HAL_HCD_Connect_Callback(hhcd); + hhcd->HostState = HCD_HCD_STATE_CONNECTED; + } + /* K-state detected & LastState=Disconnected */ + else if (((hhcd->Instance->ISTR & USB_ISTR_LS_DCONN) != 0U) + && ((hhcd->HostState == HCD_HCD_STATE_DISCONNECTED) != 0U)) + { + HAL_HCD_Connect_Callback(hhcd); + hhcd->HostState = HCD_HCD_STATE_CONNECTED; + } + /* SE0 detected USB Disconnected state */ + else if ((hhcd->Instance->FNR & (USB_FNR_RXDP | USB_FNR_RXDM)) == 0U) + { + /*Host Port State*/ + hhcd->HostState = HCD_HCD_STATE_DISCONNECTED; + /*Disconnection Callback */ + HAL_HCD_Disconnect_Callback(hhcd); + } + /* J-state detected & lastState=Connected: a Missing disconnection is detected */ + else if (((hhcd->Instance->FNR & USB_FNR_RXDP) != 0U) && + ((hhcd->HostState == HCD_HCD_STATE_CONNECTED) != 0U)) + { + /*Disconnection Callback */ + HAL_HCD_Disconnect_Callback(hhcd); + /*Host Port State*/ + hhcd->HostState = HCD_HCD_STATE_DISCONNECTED; + } + /* K-state detected & LastState=Disconnected: a Missing disconnection is detected */ + else if (((hhcd->Instance->ISTR & USB_ISTR_LS_DCONN) != 0U) + && ((hhcd->HostState == HCD_HCD_STATE_CONNECTED) != 0U)) + { + /*Disconnection Callback */ + HAL_HCD_Disconnect_Callback(hhcd); + /*Host Port State*/ + hhcd->HostState = HCD_HCD_STATE_DISCONNECTED; + } + else + { + /* should not be here */ + } +} + +/** + * @brief Check if the ch_num are already reserved to a physical channel + * @param hhcd HCD handle + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL status + */ +static uint8_t HAL_HCD_Check_usedChannel(HCD_HandleTypeDef *hhcd, uint8_t ch_num) +{ + uint8_t idx; + + /* Check if the logical channel are already opened */ + for (idx = 0U; idx < hhcd->Init.Host_channels; idx++) + { + if ((((hhcd->phy_chin_state[idx] & 0x00F0U) >> 4U) == ((uint16_t)ch_num + 1U)) && (hhcd->phy_chin_state[idx] != 0U)) + { + return (1U | (idx << 4U)); + } + if ((((hhcd->phy_chout_state[idx] & 0x00F0U) >> 4U) == ((uint16_t)ch_num + 1U)) && (hhcd->phy_chout_state[idx] != 0U)) + { + return (1U | (idx << 4U)); + } + } + + return 0U; +} + +/** + * @brief Get a Logical Channel number from physical Channel + * @param hhcd HCD handle + * @param phy_chnum + * This parameter can be a value from 1 to 15 + * @param dir Channel direction + * -0 OUT_Channel + * -1 IN_Channel + * @retval HAL status + */ +static uint8_t HAL_HCD_GetLogical_Channel(HCD_HandleTypeDef *hhcd, + uint8_t phy_chnum, uint8_t dir) +{ + /* Out Channel Direction */ + if (dir == 0U) + { + if (((hhcd->phy_chout_state[phy_chnum & 0x7U] & 0x00F0U) >> 4U) != 0U) + { + return ((uint8_t)((hhcd->phy_chout_state[phy_chnum & 0x7U] & 0x00F0U) >> 4U) - 1U); + } + else + { + /*Channel not registered Error*/ + return HCD_LOGICAL_CH_NOT_OPENED; + } + } + /* IN Channel Direction */ + else + { + if (((hhcd->phy_chin_state[phy_chnum & 0x7U] & 0x00F0U) >> 4U) != 0U) + { + return ((uint8_t)((hhcd->phy_chin_state[phy_chnum & 0x7U] & 0x00F0U) >> 4U) - 1U); + } + else + { + /*Channel not registered Error*/ + return HCD_LOGICAL_CH_NOT_OPENED; + } + } +} +/** + * @brief Get a free physical Channel number according to the direction + * @param hhcd HCD handle + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * EP_TYPE_CTRL Control type, + * EP_TYPE_ISOC Isochronous type, + * EP_TYPE_BULK Bulk type, + * EP_TYPE_INTR Interrupt type + * @retval if physical channel is available return Phy_channel number + else return HCD_FREE_CH_NOT_FOUND + */ +static uint8_t HAL_HCD_Get_FreePhyChannel(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t epnum, uint8_t ep_type) +{ + uint8_t idx; + + if ((epnum & 0x80U) != 0U) + { + /* Find a new available physical in channel */ + for (idx = 0U; idx < hhcd->Init.Host_channels; idx++) + { + if ((hhcd->phy_chin_state[idx] == 0U) && /* if PhysicalChannelx(EPCHidx) IN is Free */ + ((((hhcd->phy_chout_state[idx] & 0x000FU) == ((uint16_t)ep_type + 1U)) && /* if the same (EPCHidx) Channelx OUT is already opened check if the same type is allocated */ + (((hhcd->phy_chout_state[idx] & 0x0F00U) == ((uint16_t)epnum & 0x0FU)))) || /* Check if the same Epnum is allocated then allocate the same physical channelOUT for IN Logical Channel */ + (hhcd->phy_chout_state[idx] == 0U))) /* OR if physical Channel OUT (EPCHidx)is free */ + { + /* chin_state will store the ep_type to be used for the same channel in out direction */ + hhcd->phy_chin_state[idx] = (((uint16_t)ch_num + 1U) << 4U) | + ((uint16_t)ep_type + 1U) | /* ep_type(0/1/2/3) so adding + 1 to avoid having a 0 value */ + (((uint16_t)epnum & 0x0FU) << 8U); + + return idx; + } + } + } + else + { + /* Find a new available physical out channel */ + for (idx = 0U; idx < hhcd->Init.Host_channels; idx++) + { + /* if there is a free out channel and the same channel is used for the in direction then check if same ep_type used */ + if ((hhcd->phy_chout_state[idx] == 0U) && + ((((hhcd->phy_chin_state[idx] & 0x0FU) == ((uint16_t)ep_type + 1U)) && + ((hhcd->phy_chin_state[idx] & 0x0F00U) == ((uint16_t)epnum & 0x0FU))) || + (hhcd->phy_chin_state[idx] == 0U))) + { + /* chin_state will store the ep_type to be used for the same channel in out direction */ + hhcd->phy_chout_state[idx] = (((uint16_t)ch_num + 1U) << 4U) | + ((uint16_t)ep_type + 1U) | /* ep_type(0/1/2/3) so adding +1 to avoid having a 0 value */ + (((uint16_t)epnum & 0x0FU) << 8U); + + return idx; + } + } + } + + /*in case of Error */ + return HCD_FREE_CH_NOT_FOUND; +} + +/** + * @brief Free All Channel allocation + * @param hhcd HCD handle + * @retval HAL status + */ +static void HAL_HCD_ClearPhyChannel(HCD_HandleTypeDef *hhcd) +{ + uint8_t idx; + + for (idx = 0U; idx < hhcd->Init.Host_channels; idx++) + { + /*Reset channel allocation value */ + hhcd->phy_chout_state[idx] = 0U; + hhcd->phy_chin_state[idx] = 0U; + } +} + +/*---------------------- PMA Allocation Section --------------------- */ +/* + __col31________________col0__ Column-- > + lin0 | entry31.|....... | entry0 | Line + |---------|---------|--------| | + line1| entry63.|....... | entry32| | + |---------|---------|--------| \|/ + | entry127|....... | entry64| + |---------|---------|--------| + | entry256|...... |entry128| + ---------------------------- + an allocation space of 64byte need 8 Free contiguous Entry in the Matrix + - a Free Entry is a bit with 0 Value/ a busy entry is a bit with 1 value. */ + +/** + * @brief Fetch in the PMA_LockupTable free space of number of mps byte + * @param hhcd Host instance + * @param mps Channel Max Packet Size + * @retval PMA_Address of the first free block containing mps byte + 0xFFFF in case of no space available + */ +static uint16_t HAL_HCD_GetFreePMA(HCD_HandleTypeDef *hhcd, uint16_t mps) +{ + uint32_t Entry, FreeBlocks = 0U; + uint8_t FirstFreeBlock_col = 0U, FirstFreeBlock_line = 0U; + uint8_t ColIndex; + uint16_t NbrReqBlocks; + uint16_t mps_t = mps; + + /* since PMA buffer descriptor RXBD allocate address according to BLSIZE, BLSIZE=1==> mps>64 + allocation in PMA is done in 32Bytes each entry */ + if ((mps_t > 64U) && ((mps_t % 32U) != 0U)) + { + /* Align the mps to 32byte block to match the allocation in PMA, + check Definition of allocation buffer memory in usb user spec */ + mps_t = (uint16_t)(((mps_t / 32U) + 1U) * 32U); + } + + /* calculate the number of block(8byte) to allocate */ + NbrReqBlocks = mps_t / 8U; + + /* check if we need remaining Block */ + if ((mps_t % 8U) != 0U) + { + NbrReqBlocks++; + } + + /* Look For NbrReqBlocks * Empty Block */ + for (uint8_t i = 0U; ((i < PMA_BLOCKS) && (FreeBlocks != NbrReqBlocks)); i++) + { + Entry = hhcd->PMALookupTable[i]; + + /* when parse is in progress, check the first col to look for a contiguous block */ + if ((FreeBlocks != 0U) && ((Entry & (uint32_t)1U) != 0U)) + { + FreeBlocks = 0U; + } + uint8_t j = 0U; + while ((j <= 31U) && (FreeBlocks != NbrReqBlocks)) + { + /* check if block j is free */ + if ((Entry & ((uint32_t)1U << j)) == 0U) + { + if (FreeBlocks == 0U) + { + FirstFreeBlock_col = j; + FirstFreeBlock_line = i; + FreeBlocks++; + } + j++; + + /* Parse Column PMALockTable */ + while ((j <= 31U) && ((Entry & ((uint32_t)1U << j)) == 0U) && (FreeBlocks < NbrReqBlocks)) + { + FreeBlocks++; + j++; + } + + /* Free contiguous Blocks not found */ + if (((FreeBlocks < NbrReqBlocks) && (j < 31U)) || + ((j == 31U) && ((Entry & ((uint32_t)1U << j)) != 0U))) + { + FreeBlocks = 0U; + } + } + j++; + } /* end for j */ + } /* end for i */ + + /* Free block found */ + if (FreeBlocks >= NbrReqBlocks) + { + ColIndex = FirstFreeBlock_col; + + for (uint8_t i = FirstFreeBlock_line; ((i < PMA_BLOCKS) && (FreeBlocks > 0U)); i++) + { + for (uint8_t j = ColIndex; j <= 31U; j++) + { + hhcd->PMALookupTable[i] |= ((uint32_t)1U << j); + if (--FreeBlocks == 0U) + { + break; + } + } + ColIndex = 0U; + } + + return (uint16_t)((FirstFreeBlock_line * (uint16_t)256U) + (FirstFreeBlock_col * (uint16_t)8U)); + } + else + { + return 0xFFFFU; + } +} + +/** + * @brief Allocate PMA buffer for Channel + * This API will fetch a free space + * @param hhcd Host instance + * @param ch_num Channel number + * @param ch_kind endpoint Kind + * USB_SNG_BUF Single Buffer used + * USB_DBL_BUF Double Buffer used + * @param mps Channel Max Packet Size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_PMAlloc(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint16_t ch_kind, uint16_t mps) +{ + uint16_t pma_addr0; + uint16_t pma_addr1; /* used for double buffer mode if enabled */ + + /* Host Channel */ + HCD_HCTypeDef *hc = &(hhcd->hc[ch_num]); + + /* Get a FreePMA Address */ + pma_addr0 = HAL_HCD_GetFreePMA(hhcd, mps); + + /* if there is no free space to allocate */ + if (pma_addr0 == 0xFFFFU) + { + return HAL_ERROR; + } + else + { + /* Here we check if the endpoint is single or double Buffer */ + if (ch_kind == HCD_SNG_BUF) + { + /* Single Buffer */ + hc->doublebuffer = 0U; + + /* Configure the PMA */ + if (hc->ch_dir == CH_IN_DIR) + { + (USB_DRD_PMA_BUFF + hc->phy_ch_num)->RXBD = pma_addr0; + } + else + { + (USB_DRD_PMA_BUFF + hc->phy_ch_num)->TXBD = pma_addr0; + } + + /* Set the Pmaaddress */ + hc->pmaadress = pma_addr0; + } + else /* USB_DBL_BUF */ + { + /* Double Buffer Endpoint */ + hc->doublebuffer = 1U; + + /* Get a FreePMA Address for buffer 2 */ + pma_addr1 = HAL_HCD_GetFreePMA(hhcd, mps); + + if (pma_addr1 == 0xFFFFU) + { + /* Free the first buffer */ + (void)HAL_HCD_PMAFree(hhcd, pma_addr0, mps); + return HAL_ERROR; + } + else + { + /* Configure the PMA */ + hc->pmaaddr0 = (uint16_t)(pma_addr0); + hc->pmaaddr1 = (uint16_t)(pma_addr1); + + /* Set Buffer0 pma address */ + (USB_DRD_PMA_BUFF + hc->phy_ch_num)->TXBD = pma_addr0; + + /* Set Buffer1 pma address */ + (USB_DRD_PMA_BUFF + hc->phy_ch_num)->RXBD = pma_addr1; + + /* Used for Bulk DB MPS < 64bytes */ + if (hc->ch_dir == CH_IN_DIR) + { + hc->pmaadress = hc->pmaaddr1; + } + else + { + hc->pmaadress = hc->pmaaddr0; + } + } + } + } + + return HAL_OK; +} + +/** + * @brief PMA De-Allocation for Channel Free the reserved block in the PMA-LookupTable + * @param hhcd Host instance + * @param ch_num Channel number + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_PMADeAlloc(HCD_HandleTypeDef *hhcd, uint8_t ch_num) +{ + HAL_StatusTypeDef status; + uint8_t Err = 0U; + + /* Host Channel */ + HCD_HCTypeDef *hc = &(hhcd->hc[ch_num]); + + /* Single Buffer */ + if (hc->doublebuffer == 0U) + { + status = HAL_HCD_PMAFree(hhcd, hc->pmaadress, hc->max_packet); + } + else /* Double buffer */ + { + status = HAL_HCD_PMAFree(hhcd, hc->pmaaddr0, hc->max_packet); + if (status != HAL_OK) + { + Err++; + } + + status = HAL_HCD_PMAFree(hhcd, hc->pmaaddr1, hc->max_packet); + if (status != HAL_OK) + { + Err++; + } + + if (Err != 0U) + { + return HAL_ERROR; + } + } + + return status; +} + + +/** + * @brief PMA Reset + * @param hhcd Host instance + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_PMAReset(HCD_HandleTypeDef *hhcd) +{ + /* Reset All PMA Entry */ + for (uint8_t i = 0U; i < PMA_BLOCKS; i++) + { + hhcd->PMALookupTable[i] = 0U; + } + + /* Allocate a Space for buffer descriptor table depending on the Host channel number */ + for (uint8_t i = 0U; i < hhcd->Init.Host_channels; i++) + { + hhcd->PMALookupTable[0] |= ((uint32_t)1U << i); + } + + return HAL_OK; +} + +/** + * @brief PMA FRee + * @param hhcd Host instance + * @param pma_base PMA base offset stored in hhcd->hc.pmaaddr + * @param mps Max Packet Size + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_HCD_PMAFree(HCD_HandleTypeDef *hhcd, uint32_t pma_base, uint16_t mps) +{ + uint32_t block_nbr; + uint8_t ColIndex; + uint8_t LineIndex; + uint16_t mps_t = mps; + + /* since PMA buffer descriptor RXBD allocate address according to BLSIZE, BLSIZE=1==> mps>64 + allocation in PMA is done in 32Bytes each entry */ + if ((mps_t > 64U) && ((mps_t % 32U) != 0U)) + { + /* Align the mps to 32byte block to match the allocation in PMA, + check Definition of allocation buffer memory in usb user spec */ + mps_t = (uint16_t)(((mps_t / 32U) + 1U) * 32U); + } + + /* Calculate the number of needed block to Free */ + if ((mps_t / 8U) != 0U) + { + block_nbr = ((uint32_t)mps_t / 8U); + + if ((mps_t % 8U) != 0U) + { + block_nbr++; + } + } + else + { + block_nbr = 1U; + } + + /* Decode Col/Line of PMA_Base position in the PMA_LookupTable */ + if (pma_base > 256U) + { + LineIndex = (uint8_t)(pma_base / 256U); + ColIndex = (uint8_t)((pma_base - ((uint32_t)LineIndex * 256U)) / 8U); + } + else + { + LineIndex = 0U; + ColIndex = (uint8_t)(pma_base / 8U); + } + + /* Reset the corresponding bit in the lookupTable */ + for (uint8_t i = LineIndex; ((i < PMA_BLOCKS) && (block_nbr > 0U)); i++) + { + for (uint8_t j = ColIndex; j <= 31U; j++) + { + /* Check if the block is not already reserved or it was already closed */ + if ((hhcd->PMALookupTable[i] & ((uint32_t)1U << j)) == 0U) + { + return HAL_ERROR; + } + /* Free the reserved block by resetting the corresponding bit */ + hhcd->PMALookupTable[i] &= ~(1U << j); + + if (--block_nbr == 0U) + { + break; + } + } + ColIndex = 0U; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_HCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c new file mode 100644 index 0000000..bdfd1c4 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c @@ -0,0 +1,6613 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition, an then permit a call the same master sequential interface + several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT() + or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential + interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() + or using @ref HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT() + or using @ref HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can + add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). + (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT() + or using @ref HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT() + or using @ref HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + @ref HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + @ref HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + @ref HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() + (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + @ref HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + @ref HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback(). + [..] + Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit() + or @ref HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SlaveAddr_SHIFT 7U +#define SlaveAddr_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + hi2c->Instance->CR2 = (I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Normal use case for Transmitter mode */ + /* A NACK is generated to confirm the end of transfer */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + return HAL_ERROR; + } + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + + } + while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (I2C_Trials == Trials) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } + while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** +* @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. +* @retval I2C Error Code +*/ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tmpoptions = hi2c->XferOptions; + + if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +/** + * @brief This function handles I2C Communication Timeout. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + return HAL_OK; + } + else + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles Acknowledge failed detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Wait until STOP Flag is reset */ + /* AutoEnd should be initiate after AF */ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ + (hi2c->XferISR == I2C_Slave_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK, and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c new file mode 100644 index 0000000..c029d9c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c @@ -0,0 +1,335 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32G0xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + (+) Configure Wake Up Feature + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2s.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2s.c new file mode 100644 index 0000000..ca64550 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2s.c @@ -0,0 +1,1872 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2s.c + * @author MCD Application Team + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Integrated Interchip Sound (I2S) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The I2S HAL driver can be used as follow: + + (#) Declare a I2S_HandleTypeDef handle structure. + (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: + (##) Enable the SPIx interface clock. + (##) I2S pins configuration: + (+++) Enable the clock for the I2S GPIOs. + (+++) Configure these I2S pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() + and HAL_I2S_Receive_IT() APIs). + (+++) Configure the I2Sx interrupt priority. + (+++) Enable the NVIC I2S IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() + and HAL_I2S_Receive_DMA() APIs: + (+++) Declare a DMA handle structure for the Tx/Rx Stream/Channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream/Channel. + (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream/Channel. + + (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity + using HAL_I2S_Init() function. + + -@- The specific I2S interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. + -@- Make sure that either: + (+@) SYSCLK is configured or + (+@) PLLPCLK output is configured or + (+@) HSI is enabled or + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_I2S1_CLOCK_VALUE in the stm32g0xx_hal_conf.h file. + + (#) Three mode of operations are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() + (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + (+) Pause the DMA Transfer using HAL_I2S_DMAPause() + (+) Resume the DMA Transfer using HAL_I2S_DMAResume() + (+) Stop the DMA Transfer using HAL_I2S_DMAStop() + In Slave mode, if HAL_I2S_DMAStop is used to stop the communication, an error + HAL_I2S_ERROR_BUSY_LINE_RX is raised as the master continue to transmit data. + In this case __HAL_I2S_FLUSH_RX_DR macro must be used to flush the remaining data + inside DR register and avoid using DeInit/Init process for the next transfer. + + *** I2S HAL driver macros list *** + =================================== + [..] + Below the list of most used macros in I2S HAL driver. + + (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts + (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts + (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not + (+) __HAL_I2S_FLUSH_RX_DR: Read DR Register to Flush RX Data + + [..] + (@) You can refer to the I2S HAL driver header file for more useful macros + + *** I2S HAL driver macros list *** + =================================== + [..] + Callback registration: + + (#) The compilation flag USE_HAL_I2S_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2S_RegisterCallback() to register an interrupt callback. + + Function HAL_I2S_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_I2S_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2S_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + + [..] + By default, after the HAL_I2S_Init() and when the state is HAL_I2S_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2S_MasterTxCpltCallback(), HAL_I2S_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2S_Init()/ HAL_I2S_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2S_Init()/ HAL_I2S_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_I2S_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2S_STATE_READY or HAL_I2S_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2S_RegisterCallback() before calling HAL_I2S_DeInit() + or HAL_I2S_Init() function. + + [..] + When the compilation define USE_HAL_I2S_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +#ifdef HAL_I2S_MODULE_ENABLED + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2S I2S + * @brief I2S HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define I2S_TIMEOUT_FLAG 100U /*!< Timeout 100 ms */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup I2S_Private_Functions I2S Private Functions + * @{ + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMAError(DMA_HandleTypeDef *hdma); +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup I2S_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the I2Sx peripheral in simplex mode: + + (+) User must Implement HAL_I2S_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2S_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Standard + (++) Data Format + (++) MCLK Output + (++) Audio frequency + (++) Polarity + + (+) Call the function HAL_I2S_DeInit() to restore the default configuration + of the selected I2Sx peripheral. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the I2S according to the specified parameters + * in the I2S_InitTypeDef and create the associated handle. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2sdiv; + uint32_t i2sodd; + uint32_t packetlength; + uint32_t tmp; + uint32_t i2sclk; + + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + assert_param(IS_I2S_MODE(hi2s->Init.Mode)); + assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); + assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); + assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); + + if (hi2s->State == HAL_I2S_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2s->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + /* Init the I2S Callback settings */ + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hi2s->MspInitCallback == NULL) + { + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hi2s->MspInitCallback(hi2s); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2S_MspInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + + hi2s->State = HAL_I2S_STATE_BUSY; + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + CLEAR_BIT(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ + SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); + hi2s->Instance->I2SPR = 0x0002U; + + /*----------------------- I2SPR: I2SDIV and ODD Calculation -----------------*/ + /* If the requested audio frequency is not the default, compute the prescaler */ + if (hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) ********************/ + if (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) + { + /* Packet length is 16 bits */ + packetlength = 16U; + } + else + { + /* Packet length is 32 bits */ + packetlength = 32U; + } + + /* I2S standard */ + if (hi2s->Init.Standard <= I2S_STANDARD_LSB) + { + /* In I2S standard packet length is multiplied by 2 */ + packetlength = packetlength * 2U; + } + +#if defined (RCC_PERIPHCLK_I2S2) + if (hi2s->Instance == SPI1) + { + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S1); + } + else /* SPI2 case */ + { + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S2); + } +#else + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S1); +#endif + /* Compute the Real divider depending on the MCLK output state, with a floating point */ + if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) + { + /* MCLK output is enabled */ + if (hi2s->Init.DataFormat != I2S_DATAFORMAT_16B) + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 4U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + else + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 8U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + } + else + { + /* MCLK output is disabled */ + tmp = (uint32_t)(((((i2sclk / packetlength) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + + /* Remove the flatting point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (uint32_t)(tmp & (uint32_t)1U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint32_t)((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint32_t)(i2sodd << 8U); + } + else + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_PRESCALER); + return HAL_ERROR; + } + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + + /* Write to SPIx I2SPR register the computed value */ + hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput)); + + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + /* And configure the I2S with the I2S_InitStruct values */ + MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD), \ + (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | \ + hi2s->Init.Standard | hi2s->Init.DataFormat | \ + hi2s->Init.CPOL)); + +#if defined(SPI_I2SCFGR_ASTRTEN) + if ((hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT) || ((hi2s->Init.Standard == I2S_STANDARD_PCM_LONG))) + { + /* Write to SPIx I2SCFGR */ + SET_BIT(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_ASTRTEN); + } +#endif /* SPI_I2SCFGR_ASTRTEN */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the I2S peripheral + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) +{ + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* Disable the I2S Peripheral Clock */ + __HAL_I2S_DISABLE(hi2s); + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + if (hi2s->MspDeInitCallback == NULL) + { + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hi2s->MspDeInitCallback(hi2s); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_I2S_MspDeInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief I2S MSP Init + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspInit could be implemented in the user file + */ +} + +/** + * @brief I2S MSP DeInit + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User I2S Callback + * To be used instead of the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2s->ErrorCode |= HAL_I2S_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = pCallback; + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = pCallback; + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = pCallback; + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} + +/** + * @brief Unregister an I2S Callback + * I2S callback is redirected to the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2S data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2S_Transmit() + (++) HAL_I2S_Receive() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2S_Transmit_IT() + (++) HAL_I2S_Receive_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2S_Transmit_DMA() + (++) HAL_I2S_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2S_TxCpltCallback() + (++) HAL_I2S_RxCpltCallback() + (++) HAL_I2S_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + tmpreg_cfgr = hi2s->Instance->I2SCFGR; + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + while (hi2s->TxXferCount > 0U) + { + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if an underrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) + { + /* Clear underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + } + + /* Check if Slave mode is selected */ + if (((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) + || ((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX)) + { + /* Wait until Busy flag is reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate + * in continuous way and as the I2S is not disabled at the end of the I2S transaction. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Receive data */ + while (hi2s->RxXferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + /* Check if an overrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) + { + /* Clear overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Enable TXE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization + * between Master and Slave otherwise the I2S interrupt should be optimized. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Enable RXNE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Transmit data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Set the I2S Tx DMA Half transfer complete callback */ + hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; + + /* Set the I2S Tx DMA transfer complete callback */ + hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; + + /* Set the DMA error callback */ + hi2s->hdmatx->XferErrorCallback = I2S_DMAError; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmatx, + (uint32_t)hi2s->pTxBuffPtr, + (uint32_t)&hi2s->Instance->DR, + hi2s->TxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Tx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Enable Tx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Set the I2S Rx DMA Half transfer complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; + + /* Set the I2S Rx DMA transfer complete callback */ + hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; + + /* Set the DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, + hi2s->RxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Rx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Enable Rx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Pauses the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Disable the I2S DMA Tx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Disable the I2S DMA Rx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Resumes the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Enable the I2S DMA Tx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Enable the I2S DMA Rx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* If the I2S peripheral is still not enabled, enable it */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Stops the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + when calling HAL_DMA_Abort() API the DMA TX or RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + */ + + if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) + { + /* Abort the I2S DMA tx Stream/Channel */ + if (hi2s->hdmatx != NULL) + { + /* Disable the I2S DMA tx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, I2S_TIMEOUT_FLAG) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + + /* Wait until BSY flag is Reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, I2S_TIMEOUT_FLAG) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + /* Clear UDR flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Disable the I2S Tx DMA requests */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + } + + else if ((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX)) + { + /* Abort the I2S DMA rx Stream/Channel */ + if (hi2s->hdmarx != NULL) + { + /* Disable the I2S DMA rx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + /* Clear OVR flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Disable the I2S Rx DMA request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + + if (hi2s->Init.Mode == I2S_MODE_SLAVE_RX) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_BUSY_LINE_RX); + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + else + { + /* Read DR to Flush RX Data */ + READ_REG((hi2s->Instance)->DR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + + return errorcode; +} + +/** + * @brief This function handles I2S interrupt request. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) +{ + uint32_t itsource = hi2s->Instance->CR2; + uint32_t itflag = hi2s->Instance->SR; + + /* I2S in mode Receiver ------------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) == RESET) && + (I2S_CHECK_FLAG(itflag, I2S_FLAG_RXNE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_RXNE) != RESET)) + { + I2S_Receive_IT(hi2s); + return; + } + + /* I2S in mode Tramitter -----------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_TXE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_TXE) != RESET)) + { + I2S_Transmit_IT(hi2s); + return; + } + + /* I2S interrupt error -------------------------------------------------*/ + if (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_ERR) != RESET) + { + /* I2S Overrun error interrupt occurred ---------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) != RESET) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + + /* I2S Underrun error interrupt occurred --------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_UDR) != RESET) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Tx Transfer Half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2S error callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2S state + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL state + */ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s) +{ + return hi2s->State; +} + +/** + * @brief Return the I2S error code + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval I2S Error Code + */ +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s) +{ + return hi2s->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2S_Private_Functions I2S Private Functions + * @{ + */ +/** + * @brief DMA I2S transmit process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + hi2s->TxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S transmit process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxHalfCpltCallback(hi2s); +#else + HAL_I2S_TxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Rx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + hi2s->RxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxHalfCpltCallback(hi2s); +#else + HAL_I2S_RxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S communication error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMAError(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Rx and Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); + hi2s->TxXferCount = 0U; + hi2s->RxXferCount = 0U; + + hi2s->State = HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Transmit data */ + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + if (hi2s->TxXferCount == 0U) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) +{ + /* Receive data */ + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + if (hi2s->RxXferCount == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles I2S Communication Timeout. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param Flag Flag checked + * @param State Value of the flag expected + * @param Timeout Duration of the timeout + * @retval HAL status + */ +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set to status*/ + while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* HAL_I2S_MODULE_ENABLED */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_irda.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_irda.c new file mode 100644 index 0000000..40ce75d --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_irda.c @@ -0,0 +1,2987 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_irda.c + * @author MCD Application Team + * @brief IRDA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the IrDA (Infrared Data Association) Peripheral + * (IRDA) + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The IRDA HAL driver can be used as follows: + + (#) Declare a IRDA_HandleTypeDef handle structure (eg. IRDA_HandleTypeDef hirda). + (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API + in setting the associated USART or UART in IRDA mode: + (++) Enable the USARTx/UARTx interface clock. + (++) USARTx/UARTx pins configuration: + (+++) Enable the clock for the USARTx/UARTx GPIOs. + (+++) Configure these USARTx/UARTx pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT() + and HAL_IRDA_Receive_IT() APIs): + (+++) Configure the USARTx/UARTx interrupt priority. + (+++) Enable the NVIC USARTx/UARTx IRQ handle. + (+++) The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (++) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA() + and HAL_IRDA_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter), + the normal or low power mode and the clock prescaler in the hirda handle Init structure. + + (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_IRDA_MspInit() API. + + -@@- The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (#) Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit() + (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_IRDA_Transmit_IT() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_IRDA_Receive_IT() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_IRDA_Transmit_DMA() + (+) At transmission half of transfer HAL_IRDA_TxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxHalfCpltCallback() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_IRDA_Receive_DMA() + (+) At reception half of transfer HAL_IRDA_RxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxHalfCpltCallback() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** IRDA HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IRDA HAL driver. + + (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral + (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral + (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not + (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag + (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt + (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt + (+) __HAL_IRDA_GET_IT_SOURCE: Check whether or not the specified IRDA interrupt is enabled + + [..] + (@) You can refer to the IRDA HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_IRDA_RegisterCallback() to register a user callback. + Function @ref HAL_IRDA_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_IRDA_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + + [..] + By default, after the @ref HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_IRDA_TxCpltCallback(), @ref HAL_IRDA_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_IRDA_Init() + and @ref HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_IRDA_Init() and @ref HAL_IRDA_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_IRDA_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_IRDA_STATE_READY or HAL_IRDA_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_IRDA_RegisterCallback() before calling @ref HAL_IRDA_DeInit() + or @ref HAL_IRDA_Init() function. + + [..] + When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup IRDA IRDA + * @brief HAL IRDA module driver + * @{ + */ + +#ifdef HAL_IRDA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Constants IRDA Private Constants + * @{ + */ +#define IRDA_TEACK_REACK_TIMEOUT 1000U /*!< IRDA TX or RX enable acknowledge time-out value */ + +#define IRDA_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE \ + | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)) /*!< UART or USART CR1 fields of parameters set by IRDA_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Macros IRDA Private Macros + * @{ + */ +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ IRDA clock source. + * @param __BAUD__ Baud rate set by the user. + * @param __PRESCALER__ IRDA clock prescaler value. + * @retval Division result + */ +#define IRDA_DIV_SAMPLING16(__PCLK__, __BAUD__, __PRESCALER__) ((((__PCLK__)/IRDAPrescTable[(__PRESCALER__)])\ + + ((__BAUD__)/2U)) / (__BAUD__)) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup IRDA_Private_Functions + * @{ + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda); +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda); +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAError(DMA_HandleTypeDef *hdma); +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + in asynchronous IRDA mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Power mode + (++) Prescaler setting + (++) Receiver/transmitter modes + + [..] + The HAL_IRDA_Init() API follows the USART asynchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible IRDA frame formats are listed in the + following table. + + Table 1. IRDA frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | IRDA frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the IRDA mode according to the specified + * parameters in the IRDA_InitTypeDef and initialize the associated handle. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + if (hirda->gState == HAL_IRDA_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hirda->Lock = HAL_UNLOCKED; + +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + IRDA_InitCallbacksToDefault(hirda); + + if (hirda->MspInitCallback == NULL) + { + hirda->MspInitCallback = HAL_IRDA_MspInit; + } + + /* Init the low level hardware */ + hirda->MspInitCallback(hirda); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_IRDA_MspInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* Disable the Peripheral to update the configuration registers */ + __HAL_IRDA_DISABLE(hirda); + + /* Set the IRDA Communication parameters */ + if (IRDA_SetConfig(hirda) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(hirda->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + + /* set the UART/USART in IRDA mode */ + hirda->Instance->CR3 |= USART_CR3_IREN; + + /* Enable the Peripheral */ + __HAL_IRDA_ENABLE(hirda); + + /* TEACK and/or REACK to check before moving hirda->gState and hirda->RxState to Ready */ + return (IRDA_CheckIdleState(hirda)); +} + +/** + * @brief DeInitialize the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* DeInit the low level hardware */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + if (hirda->MspDeInitCallback == NULL) + { + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + } + /* DeInit the low level hardware */ + hirda->MspDeInitCallback(hirda); +#else + HAL_IRDA_MspDeInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + /* Disable the Peripheral */ + __HAL_IRDA_DISABLE(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_RESET; + hirda->RxState = HAL_IRDA_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Initialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User IRDA Callback + * To be used instead of the weak predefined callback + * @param hirda irda handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_READY) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = pCallback; + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = pCallback; + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hirda->gState == HAL_IRDA_STATE_RESET) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hirda); + + return status; +} + +/** + * @brief Unregister an IRDA callback + * IRDA callback is redirected to the weak predefined callback + * @param hirda irda handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hirda); + + if (HAL_IRDA_STATE_READY == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_IRDA_STATE_RESET == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hirda); + + return status; +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions + * @brief IRDA Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the IRDA data transfers. + + [..] + IrDA is a half duplex communication protocol. If the Transmitter is busy, any data + on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver + is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. + While receiving data, transmission should be avoided as the data to be transmitted + could be corrupted. + + [..] + (#) There are two modes of transfer: + (++) Blocking mode: the communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non-Blocking mode: the communication is performed using Interrupts + or DMA, these API's return the HAL status. + The end of the data processing will be indicated through the + dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected + + (#) Blocking mode APIs are : + (++) HAL_IRDA_Transmit() + (++) HAL_IRDA_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (++) HAL_IRDA_Transmit_IT() + (++) HAL_IRDA_Receive_IT() + (++) HAL_IRDA_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (++) HAL_IRDA_Transmit_DMA() + (++) HAL_IRDA_Receive_DMA() + (++) HAL_IRDA_DMAPause() + (++) HAL_IRDA_DMAResume() + (++) HAL_IRDA_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode: + (++) HAL_IRDA_TxHalfCpltCallback() + (++) HAL_IRDA_TxCpltCallback() + (++) HAL_IRDA_RxHalfCpltCallback() + (++) HAL_IRDA_RxCpltCallback() + (++) HAL_IRDA_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_IRDA_Abort() + (++) HAL_IRDA_AbortTransmit() + (++) HAL_IRDA_AbortReceive() + (++) HAL_IRDA_Abort_IT() + (++) HAL_IRDA_AbortTransmit_IT() + (++) HAL_IRDA_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (++) HAL_IRDA_AbortCpltCallback() + (++) HAL_IRDA_AbortTransmitCpltCallback() + (++) HAL_IRDA_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, + and HAL_IRDA_ErrorCallback() user callback is executed. Transfer is kept ongoing on IRDA side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (hirda->TxXferCount > 0U) + { + hirda->TxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + hirda->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + hirda->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + } + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + uhMask = hirda->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Check data remaining to be received */ + while (hirda->RxXferCount > 0U) + { + hirda->RxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(hirda->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + } + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the IRDA Transmit Data Register Empty Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to the RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the IRDA Parity Error and Data Register not empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + + /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmatx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmatx->XferAbortCallback = NULL; + + /* Enable the IRDA transmit DMA channel */ + if (HAL_DMA_Start_IT(hirda->hdmatx, (uint32_t)hirda->pTxBuffPtr, (uint32_t)&hirda->Instance->TDR, Size) == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->gState to ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @note When the IRDA parity is enabled (PCE = 1), the received data contains + * the parity bit (MSB position). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmarx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, (uint32_t)hirda->pRxBuffPtr, Size) == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the UART Parity Error Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->RxState to ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Pause the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the IRDA DMA Tx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + /* Enable the IRDA DMA Tx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_IRDA_CLEAR_OREFLAG(hirda); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the IRDA DMA Rx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() / + HAL_IRDA_TxHalfCpltCallback / HAL_IRDA_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel */ + if (hirda->hdmatx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndRxTransfer(hirda); + } + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* If DMA Tx and/or DMA Rx Handles are associated to IRDA Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hirda->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->hdmatx->XferAbortCallback = IRDA_DMATxAbortCallback; + } + else + { + hirda->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hirda->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->hdmarx->XferAbortCallback = IRDA_DMARxAbortCallback; + } + else + { + hirda->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* IRDA Tx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + hirda->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* IRDA Rx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + hirda->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = IRDA_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + /* Call Directly hirda->hdmatx->XferAbortCallback function in case of error */ + hirda->hdmatx->XferAbortCallback(hirda->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle IRDA interrupt request. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda) +{ + uint32_t isrflags = READ_REG(hirda->Instance->ISR); + uint32_t cr1its = READ_REG(hirda->Instance->CR1); + uint32_t cr3its; + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); + if (errorflags == 0U) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + return; + } + } + + /* If some errors occur */ + cr3its = READ_REG(hirda->Instance->CR3); + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* IRDA parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_PE; + } + + /* IRDA frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_FE; + } + + /* IRDA noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_NE; + } + + /* IRDA Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) && + (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_ORE; + } + + /* Call IRDA Error Call back function if need be --------------------------*/ + if (hirda->ErrorCode != HAL_IRDA_ERROR_NONE) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = hirda->ErrorCode; + if ((HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & HAL_IRDA_ERROR_ORE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the IRDA state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + IRDA_EndRxTransfer(hirda); + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* IRDA in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) && ((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U)) + { + IRDA_Transmit_IT(hirda); + return; + } + + /* IRDA in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + IRDA_EndTransmit_IT(hirda); + return; + } + +} + +/** + * @brief Tx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA error callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Receive Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @brief IRDA State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of IrDA + communication process and also return Peripheral Errors occurred during communication process + (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state + of the IRDA peripheral handle. + (+) HAL_IRDA_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the IRDA handle state. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL state + */ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda) +{ + /* Return IRDA handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hirda->gState; + temp2 = (uint32_t)hirda->RxState; + + return (HAL_IRDA_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the IRDA handle error code. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval IRDA Error Code + */ +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda) +{ + return hirda->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IRDA_Private_Functions IRDA Private Functions + * @{ + */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hirda IRDA handle. + * @retval none + */ +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda) +{ + /* Init the IRDA Callback settings */ + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @brief Configure the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) +{ + uint32_t tmpreg; + IRDA_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; + + /* Check the communication parameters */ + assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate)); + assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength)); + assert_param(IS_IRDA_PARITY(hirda->Init.Parity)); + assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode)); + assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler)); + assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode)); + assert_param(IS_IRDA_CLOCKPRESCALER(hirda->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Configure the IRDA Word Length, Parity and transfer Mode: + Set the M bits according to hirda->Init.WordLength value + Set PCE and PS bits according to hirda->Init.Parity value + Set TE and RE bits according to hirda->Init.Mode value */ + tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ; + + MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode); + + /*--------------------- USART clock PRESC Configuration ----------------*/ + /* Configure + * - IRDA Clock Prescaler: set PRESCALER according to hirda->Init.ClockPrescaler value */ + MODIFY_REG(hirda->Instance->PRESC, USART_PRESC_PRESCALER, hirda->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + MODIFY_REG(hirda->Instance->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)hirda->Init.Prescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + IRDA_GETCLOCKSOURCE(hirda, clocksource); + tmpreg = 0U; + switch (clocksource) + { + case IRDA_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_HSI: + tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(HSI_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_LSE: + tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16((uint32_t)LSE_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hirda->Instance->BRR = tmpreg; + } + else + { + ret = HAL_ERROR; + } + + return ret; +} + +/** + * @brief Check the IRDA Idle State. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda) +{ + uint32_t tickstart; + + /* Initialize the IRDA ErrorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the IRDA state*/ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Handle IRDA Communication Timeout. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param Flag Specifies the IRDA flag to check. + * @param Status Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; +} + + +/** + * @brief DMA IRDA transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + hirda->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + +} + +/** + * @brief DMA IRDA transmit process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half complete callback */ + hirda->TxHalfCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + hirda->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + } + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA IRDA receive process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + hirda->RxHalfCpltCallback(hirda); +#else + /* Call legacy weak Rx Half complete callback */ + HAL_IRDA_RxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->TxXferCount = 0U; + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->RxXferCount = 0U; + IRDA_EndRxTransfer(hirda); + } + } + + hirda->ErrorCode |= HAL_IRDA_ERROR_DMA; +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + hirda->RxXferCount = 0U; + hirda->TxXferCount = 0U; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmarx != NULL) + { + if (hirda->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmatx != NULL) + { + if (hirda->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Transmit_IT(). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda) +{ + uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (hirda->TxXferCount == 0U) + { + /* Disable the IRDA Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + else + { + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (uint16_t *) hirda->pTxBuffPtr; /* Derogation R.11.3 */ + hirda->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + hirda->pTxBuffPtr += 2U; + } + else + { + hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr & 0xFFU); + hirda->pTxBuffPtr++; + } + hirda->TxXferCount--; + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable the IRDA Transmit Complete Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Receive_IT() + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda) +{ + uint16_t *tmp; + uint16_t uhMask = hirda->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(hirda->Instance->RDR); + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (uint16_t *) hirda->pRxBuffPtr; /* Derogation R.11.3 */ + *tmp = (uint16_t)(uhdata & uhMask); + hirda->pRxBuffPtr += 2U; + } + else + { + *hirda->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + hirda->pRxBuffPtr++; + } + + hirda->RxXferCount--; + if (hirda->RxXferCount == 0U) + { + /* Disable the IRDA Parity Error Interrupt and RXNE interrupt */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_IRDA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_iwdg.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_iwdg.c new file mode 100644 index 0000000..4cfce03 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_iwdg.c @@ -0,0 +1,278 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_iwdg.c + * @author MCD Application Team + * @brief IWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Independent Watchdog (IWDG) peripheral: + * + Initialization and Start functions + * + IO operation functions + * + @verbatim + ============================================================================== + ##### IWDG Generic features ##### + ============================================================================== + [..] + (+) The IWDG can be started by either software or hardware (configurable + through option byte). + + (+) The IWDG is clocked by the Low-Speed Internal clock (LSI) and thus stays + active even if the main clock fails. + + (+) Once the IWDG is started, the LSI is forced ON and both cannot be + disabled. The counter starts counting down from the reset value (0xFFF). + When it reaches the end of count value (0x000) a reset signal is + generated (IWDG reset). + + (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register, + the IWDG_RLR value is reloaded into the counter and the watchdog reset + is prevented. + + (+) The IWDG is implemented in the VDD voltage domain that is still functional + in STOP and STANDBY mode (IWDG reset can wake up the CPU from STANDBY). + IWDGRST flag in RCC_CSR register can be used to inform when an IWDG + reset occurs. + + (+) Debug mode: When the microcontroller enters debug mode (core halted), + the IWDG counter either continues to work normally or stops, depending + on DBG_IWDG_STOP configuration bit in DBG module, accessible through + __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros. + + [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s + The IWDG timeout may vary due to LSI clock frequency dispersion. + STM32G0xx devices provide the capability to measure the LSI clock + frequency (LSI clock is internally connected to TIM16 CH1 input capture). + The measured value can be used to have an IWDG timeout with an + acceptable accuracy. + + [..] Default timeout value (necessary for IWDG_SR status register update): + Constant LSI_VALUE is defined based on the nominal LSI clock frequency. + This frequency being subject to variations as mentioned above, the + default timeout value (defined through constant HAL_IWDG_DEFAULT_TIMEOUT + below) may become too short or too long. + In such cases, this default timeout value can be tuned by redefining + the constant LSI_VALUE at user-application level (based, for instance, + on the measured LSI clock frequency as explained above). + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Use IWDG using HAL_IWDG_Init() function to : + (++) Enable instance by writing Start keyword in IWDG_KEY register. LSI + clock is forced ON and IWDG counter starts counting down. + (++) Enable write access to configuration registers: + IWDG_PR, IWDG_RLR and IWDG_WINR. + (++) Configure the IWDG prescaler and counter reload value. This reload + value will be loaded in the IWDG counter each time the watchdog is + reloaded, then the IWDG will start counting down from this value. + (++) Wait for status flags to be reset. + (++) Depending on window parameter: + (+++) If Window Init parameter is same as Window register value, + nothing more is done but reload counter value in order to exit + function with exact time base. + (+++) Else modify Window register. This will automatically reload + watchdog counter. + + (#) Then the application program must refresh the IWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_IWDG_Refresh() function. + + *** IWDG HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IWDG HAL driver: + (+) __HAL_IWDG_START: Enable the IWDG peripheral + (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in + the reload register + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_IWDG_MODULE_ENABLED +/** @addtogroup IWDG + * @brief IWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Defines IWDG Private Defines + * @{ + */ +/* Status register needs up to 5 LSI clock periods divided by the clock + prescaler to be updated. The number of LSI clock periods is upper-rounded to + 6 for the timeout value calculation. + The timeout value is also calculated using the highest prescaler (256) and + the LSI_VALUE constant. The value of this constant can be changed by the user + to take into account possible LSI clock period variations. + The timeout value is multiplied by 1000 to be converted in milliseconds. */ +#define HAL_IWDG_DEFAULT_TIMEOUT ((6UL * 256UL * 1000UL) / LSI_VALUE) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup IWDG_Exported_Functions + * @{ + */ + +/** @addtogroup IWDG_Exported_Functions_Group1 + * @brief Initialization and Start functions. + * +@verbatim + =============================================================================== + ##### Initialization and Start functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the IWDG according to the specified parameters in the + IWDG_InitTypeDef of associated handle. + (+) Manage Window option. + (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog + is reloaded in order to exit function with correct time base. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the IWDG according to the specified parameters in the + * IWDG_InitTypeDef and start watchdog. Before exiting function, + * watchdog is refreshed in order to have correct time base. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg) +{ + uint32_t tickstart; + + /* Check the IWDG handle allocation */ + if (hiwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance)); + assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler)); + assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload)); + assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window)); + + /* Enable IWDG. LSI is turned on automatically */ + __HAL_IWDG_START(hiwdg); + + /* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers by writing + 0x5555 in KR */ + IWDG_ENABLE_WRITE_ACCESS(hiwdg); + + /* Write to IWDG registers the Prescaler & Reload values to work with */ + hiwdg->Instance->PR = hiwdg->Init.Prescaler; + hiwdg->Instance->RLR = hiwdg->Init.Reload; + + /* Check pending flag, if previous update not done, return timeout */ + tickstart = HAL_GetTick(); + + /* Wait for register to be updated */ + while (hiwdg->Instance->SR != 0x00u) + { + if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* If window parameter is different than current value, modify window + register */ + if (hiwdg->Instance->WINR != hiwdg->Init.Window) + { + /* Write to IWDG WINR the IWDG_Window value to compare with. In any case, + even if window feature is disabled, Watchdog will be reloaded by writing + windows register */ + hiwdg->Instance->WINR = hiwdg->Init.Window; + } + else + { + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + + +/** @addtogroup IWDG_Exported_Functions_Group2 + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Refresh the IWDG. + +@endverbatim + * @{ + */ + + +/** + * @brief Refresh the IWDG. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg) +{ + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_IWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_lptim.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_lptim.c new file mode 100644 index 0000000..441e792 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_lptim.c @@ -0,0 +1,2512 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_lptim.c + * @author MCD Application Team + * @brief LPTIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Low Power Timer (LPTIM) peripheral: + * + Initialization and de-initialization functions. + * + Start/Stop operation functions in polling mode. + * + Start/Stop operation functions in interrupt mode. + * + Reading operation functions. + * + Peripheral State functions. + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LPTIM HAL driver can be used as follows: + + (#)Initialize the LPTIM low level resources by implementing the + HAL_LPTIM_MspInit(): + (++) Enable the LPTIM interface clock using __HAL_RCC_LPTIMx_CLK_ENABLE(). + (++) In case of using interrupts (e.g. HAL_LPTIM_PWM_Start_IT()): + (+++) Configure the LPTIM interrupt priority using HAL_NVIC_SetPriority(). + (+++) Enable the LPTIM IRQ handler using HAL_NVIC_EnableIRQ(). + (+++) In LPTIM IRQ handler, call HAL_LPTIM_IRQHandler(). + + (#)Initialize the LPTIM HAL using HAL_LPTIM_Init(). This function + configures mainly: + (++) The instance: LPTIM1 or LPTIM2. + (++) Clock: the counter clock. + (+++) Source : it can be either the ULPTIM input (IN1) or one of + the internal clock; (APB, LSE, LSI or MSI). + (+++) Prescaler: select the clock divider. + (++) UltraLowPowerClock : To be used only if the ULPTIM is selected + as counter clock source. + (+++) Polarity: polarity of the active edge for the counter unit + if the ULPTIM input is selected. + (+++) SampleTime: clock sampling time to configure the clock glitch + filter. + (++) Trigger: How the counter start. + (+++) Source: trigger can be software or one of the hardware triggers. + (+++) ActiveEdge : only for hardware trigger. + (+++) SampleTime : trigger sampling time to configure the trigger + glitch filter. + (++) OutputPolarity : 2 opposite polarities are possible. + (++) UpdateMode: specifies whether the update of the autoreload and + the compare values is done immediately or after the end of current + period. + (++) Input1Source: Source selected for input1 (GPIO or comparator output). + (++) Input2Source: Source selected for input2 (GPIO or comparator output). + Input2 is used only for encoder feature so is used only for LPTIM1 instance. + + (#)Six modes are available: + + (++) PWM Mode: To generate a PWM signal with specified period and pulse, + call HAL_LPTIM_PWM_Start() or HAL_LPTIM_PWM_Start_IT() for interruption + mode. + + (++) One Pulse Mode: To generate pulse with specified width in response + to a stimulus, call HAL_LPTIM_OnePulse_Start() or + HAL_LPTIM_OnePulse_Start_IT() for interruption mode. + + (++) Set once Mode: In this mode, the output changes the level (from + low level to high level if the output polarity is configured high, else + the opposite) when a compare match occurs. To start this mode, call + HAL_LPTIM_SetOnce_Start() or HAL_LPTIM_SetOnce_Start_IT() for + interruption mode. + + (++) Encoder Mode: To use the encoder interface call + HAL_LPTIM_Encoder_Start() or HAL_LPTIM_Encoder_Start_IT() for + interruption mode. Only available for LPTIM1 instance. + + (++) Time out Mode: an active edge on one selected trigger input rests + the counter. The first trigger event will start the timer, any + successive trigger event will reset the counter and the timer will + restart. To start this mode call HAL_LPTIM_TimeOut_Start_IT() or + HAL_LPTIM_TimeOut_Start_IT() for interruption mode. + + (++) Counter Mode: counter can be used to count external events on + the LPTIM Input1 or it can be used to count internal clock cycles. + To start this mode, call HAL_LPTIM_Counter_Start() or + HAL_LPTIM_Counter_Start_IT() for interruption mode. + + + (#) User can stop any process by calling the corresponding API: + HAL_LPTIM_Xxx_Stop() or HAL_LPTIM_Xxx_Stop_IT() if the process is + already started in interruption mode. + + (#) De-initialize the LPTIM peripheral using HAL_LPTIM_DeInit(). + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + [..] + Use Function @ref HAL_LPTIM_RegisterCallback() to register a callback. + @ref HAL_LPTIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + [..] + Use function @ref HAL_LPTIM_UnRegisterCallback() to reset a callback to the + default weak function. + @ref HAL_LPTIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + [..] + These functions allow to register/unregister following callbacks: + + (+) MspInitCallback : LPTIM Base Msp Init Callback. + (+) MspDeInitCallback : LPTIM Base Msp DeInit Callback. + (+) CompareMatchCallback : Compare match Callback. + (+) AutoReloadMatchCallback : Auto-reload match Callback. + (+) TriggerCallback : External trigger event detection Callback. + (+) CompareWriteCallback : Compare register write complete Callback. + (+) AutoReloadWriteCallback : Auto-reload register write complete Callback. + (+) DirectionUpCallback : Up-counting direction change Callback. + (+) DirectionDownCallback : Down-counting direction change Callback. + + [..] + By default, after the Init and when the state is HAL_LPTIM_STATE_RESET + all interrupt callbacks are set to the corresponding weak functions: + examples @ref HAL_LPTIM_TriggerCallback(), @ref HAL_LPTIM_CompareMatchCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init/DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init/DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_LPTIM_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_LPTIM_STATE_READY or HAL_LPTIM_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_LPTIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup LPTIM LPTIM + * @brief LPTIM HAL module driver. + * @{ + */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + +#if defined (LPTIM1) || defined (LPTIM2) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup LPTIM_Private_Constants + * @{ + */ +#define TIMEOUT 1000UL /* Timeout is 1s */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @addtogroup LPTIM_Private_Macros + * @{ + */ +#if defined(LPTIM2) +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) \ + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT()) + +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) \ + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT()) +#else +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() + +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() +#endif /* LPTIM2 */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions + * @{ + */ + +/** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the LPTIM according to the specified parameters in the + LPTIM_InitTypeDef and initialize the associated handle. + (+) DeInitialize the LPTIM peripheral. + (+) Initialize the LPTIM MSP. + (+) DeInitialize the LPTIM MSP. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the LPTIM according to the specified parameters in the + * LPTIM_InitTypeDef and initialize the associated handle. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) +{ + uint32_t tmpcfgr; + + /* Check the LPTIM handle allocation */ + if (hlptim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source)); + assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler)); + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + { + assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); + } + assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source)); + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) + { + assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge)); + } + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) + { + assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime)); + assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime)); + } + assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity)); + assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode)); + assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource)); + + if (hlptim->State == HAL_LPTIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hlptim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + LPTIM_ResetCallback(hlptim); + + if (hlptim->MspInitCallback == NULL) + { + hlptim->MspInitCallback = HAL_LPTIM_MspInit; + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + hlptim->MspInitCallback(hlptim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_LPTIM_MspInit(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Get the LPTIMx CFGR value */ + tmpcfgr = hlptim->Instance->CFGR; + + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + { + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL)); + } + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) + { + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRIGSEL)); + } + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) + { + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_CKFLT)); + } + + /* Clear CKSEL, CKPOL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */ + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_CKPOL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD | + LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE)); + + /* Set initialization parameters */ + tmpcfgr |= (hlptim->Init.Clock.Source | + hlptim->Init.Clock.Prescaler | + hlptim->Init.OutputPolarity | + hlptim->Init.UpdateMode | + hlptim->Init.CounterSource); + + /* Glitch filters for internal triggers and external inputs are configured + * only if an internal clock source is provided to the LPTIM + */ + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) + { + tmpcfgr |= (hlptim->Init.Trigger.SampleTime | + hlptim->Init.UltraLowPowerClock.SampleTime); + } + + /* Configure the active edge or edges used by the counter only if LPTIM is + * clocked by an external clock source + */ + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + { + tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity); + } + + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Enable External trigger and set the trigger source */ + tmpcfgr |= (hlptim->Init.Trigger.Source | + hlptim->Init.Trigger.ActiveEdge); + } + + /* Write to LPTIMx CFGR */ + hlptim->Instance->CFGR = tmpcfgr; + + /* Configure LPTIM input sources */ + if (hlptim->Instance == LPTIM1) + { + /* Check LPTIM Input1 and Input2 sources */ + assert_param(IS_LPTIM_INPUT1_SOURCE(hlptim->Instance, hlptim->Init.Input1Source)); + assert_param(IS_LPTIM_INPUT2_SOURCE(hlptim->Instance, hlptim->Init.Input2Source)); + + /* Configure LPTIM Input1 and Input2 sources */ + hlptim->Instance->CFGR2 = (hlptim->Init.Input1Source | hlptim->Init.Input2Source); + } + else + { + /* Check LPTIM2 Input1 source */ + assert_param(IS_LPTIM_INPUT1_SOURCE(hlptim->Instance, hlptim->Init.Input1Source)); + + /* Configure LPTIM2 Input1 source */ + hlptim->Instance->CFGR2 = hlptim->Init.Input1Source; + } + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the LPTIM peripheral. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the LPTIM handle allocation */ + if (hlptim == NULL) + { + return HAL_ERROR; + } + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the LPTIM Peripheral Clock */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + if (hlptim->MspDeInitCallback == NULL) + { + hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hlptim->MspDeInitCallback(hlptim); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_LPTIM_MspDeInit(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hlptim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the LPTIM MSP. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize LPTIM MSP. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions + * @brief Start-Stop operation functions. + * +@verbatim + ============================================================================== + ##### LPTIM Start Stop operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start the PWM mode. + (+) Stop the PWM mode. + (+) Start the One pulse mode. + (+) Stop the One pulse mode. + (+) Start the Set once mode. + (+) Stop the Set once mode. + (+) Start the Encoder mode. + (+) Stop the Encoder mode. + (+) Start the Timeout mode. + (+) Stop the Timeout mode. + (+) Start the Counter mode. + (+) Stop the Counter mode. + + +@endverbatim + * @{ + */ + +/** + * @brief Start the LPTIM PWM generation. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @param Pulse Specifies the compare value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Pulse)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Reset WAVE bit to set PWM mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM PWM generation. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM PWM generation in interrupt mode. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF + * @param Pulse Specifies the compare value. + * This parameter must be a value between 0x0000 and 0xFFFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Pulse)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Reset WAVE bit to set PWM mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Enable Autoreload write complete interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Enable Compare write complete interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK); + + /* Enable Autoreload match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); + + /* Enable Compare match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Enable external trigger interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM PWM generation in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable Autoreload write complete interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Disable Compare write complete interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK); + + /* Disable Autoreload match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); + + /* Disable Compare match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* If external trigger source is used, then disable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Disable external trigger interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + } + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM One pulse generation. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @param Pulse Specifies the compare value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Pulse)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Reset WAVE bit to set one pulse mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM One pulse generation. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM One pulse generation in interrupt mode. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @param Pulse Specifies the compare value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Pulse)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Reset WAVE bit to set one pulse mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Enable Autoreload write complete interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Enable Compare write complete interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK); + + /* Enable Autoreload match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); + + /* Enable Compare match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Enable external trigger interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM One pulse generation in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable Autoreload write complete interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Disable Compare write complete interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK); + + /* Disable Autoreload match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); + + /* Disable Compare match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* If external trigger source is used, then disable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Disable external trigger interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + } + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM in Set once mode. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @param Pulse Specifies the compare value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Pulse)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set WAVE bit to enable the set once mode */ + hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM Set once mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM Set once mode in interrupt mode. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @param Pulse Specifies the compare value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Pulse)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set WAVE bit to enable the set once mode */ + hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Enable Autoreload write complete interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Enable Compare write complete interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK); + + /* Enable Autoreload match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); + + /* Enable Compare match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Enable external trigger interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM Set once mode in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable Autoreload write complete interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Disable Compare write complete interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK); + + /* Disable Autoreload match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); + + /* Disable Compare match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* If external trigger source is used, then disable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Disable external trigger interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + } + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Encoder interface. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period) +{ + uint32_t tmpcfgr; + + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC); + assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1); + assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Get the LPTIMx CFGR value */ + tmpcfgr = hlptim->Instance->CFGR; + + /* Clear CKPOL bits */ + tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL); + + /* Set Input polarity */ + tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity; + + /* Write to LPTIMx CFGR */ + hlptim->Instance->CFGR = tmpcfgr; + + /* Set ENC bit to enable the encoder interface */ + hlptim->Instance->CFGR |= LPTIM_CFGR_ENC; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Encoder interface. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Reset ENC bit to disable the encoder interface */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Encoder interface in interrupt mode. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period) +{ + uint32_t tmpcfgr; + + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC); + assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1); + assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Configure edge sensitivity for encoder mode */ + /* Get the LPTIMx CFGR value */ + tmpcfgr = hlptim->Instance->CFGR; + + /* Clear CKPOL bits */ + tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL); + + /* Set Input polarity */ + tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity; + + /* Write to LPTIMx CFGR */ + hlptim->Instance->CFGR = tmpcfgr; + + /* Set ENC bit to enable the encoder interface */ + hlptim->Instance->CFGR |= LPTIM_CFGR_ENC; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Enable "switch to down direction" interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_DOWN); + + /* Enable "switch to up direction" interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_UP); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Encoder interface in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Reset ENC bit to disable the encoder interface */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; + + /* Disable "switch to down direction" interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_DOWN); + + /* Disable "switch to up direction" interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_UP); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Timeout function. + * @note The first trigger event will start the timer, any successive + * trigger event will reset the counter and the timer restarts. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @param Timeout Specifies the TimeOut value to reset the counter. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Timeout)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the Timeout value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Timeout); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Timeout function. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Reset TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Timeout function in interrupt mode. + * @note The first trigger event will start the timer, any successive + * trigger event will reset the counter and the timer restarts. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @param Timeout Specifies the TimeOut value to reset the counter. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + assert_param(IS_LPTIM_PULSE(Timeout)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance); + + /* Set TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the Timeout value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Timeout); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Enable Compare match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Timeout function in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(hlptim->Instance); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Reset TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; + + /* Disable Compare match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Counter mode. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ + if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + { + /* Check if clock is prescaled */ + assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); + /* Set clock prescaler to 0 */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC; + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Counter mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Counter mode in interrupt mode. + * @param hlptim LPTIM handle + * @param Period Specifies the Autoreload value. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(Period)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance); + + /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ + if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + { + /* Check if clock is prescaled */ + assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); + /* Set clock prescaler to 0 */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC; + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Enable Autoreload write complete interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Enable Autoreload match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Counter mode in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(hlptim->Instance); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable Autoreload write complete interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); + + /* Disable Autoreload match interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); + /* Change the TIM state*/ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions + * @brief Read operation functions. + * +@verbatim + ============================================================================== + ##### LPTIM Read operation functions ##### + ============================================================================== +[..] This section provides LPTIM Reading functions. + (+) Read the counter value. + (+) Read the period (Auto-reload) value. + (+) Read the pulse (Compare)value. +@endverbatim + * @{ + */ + +/** + * @brief Return the current counter value. + * @param hlptim LPTIM handle + * @retval Counter value. + */ +uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + return (hlptim->Instance->CNT); +} + +/** + * @brief Return the current Autoreload (Period) value. + * @param hlptim LPTIM handle + * @retval Autoreload value. + */ +uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + return (hlptim->Instance->ARR); +} + +/** + * @brief Return the current Compare (Pulse) value. + * @param hlptim LPTIM handle + * @retval Compare value. + */ +uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + return (hlptim->Instance->CMP); +} + +/** + * @} + */ + +/** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler and callbacks + * @brief LPTIM IRQ handler. + * +@verbatim + ============================================================================== + ##### LPTIM IRQ handler and callbacks ##### + ============================================================================== +[..] This section provides LPTIM IRQ handler and callback functions called within + the IRQ handler: + (+) LPTIM interrupt request handler + (+) Compare match Callback + (+) Auto-reload match Callback + (+) External trigger event detection Callback + (+) Compare register write complete Callback + (+) Auto-reload register write complete Callback + (+) Up-counting direction change Callback + (+) Down-counting direction change Callback + +@endverbatim + * @{ + */ + +/** + * @brief Handle LPTIM interrupt request. + * @param hlptim LPTIM handle + * @retval None + */ +void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim) +{ + /* Compare match interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPM) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPM) != RESET) + { + /* Clear Compare match flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPM); + + /* Compare match Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->CompareMatchCallback(hlptim); +#else + HAL_LPTIM_CompareMatchCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Autoreload match interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARRM) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARRM) != RESET) + { + /* Clear Autoreload match flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARRM); + + /* Autoreload match Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->AutoReloadMatchCallback(hlptim); +#else + HAL_LPTIM_AutoReloadMatchCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Trigger detected interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_EXTTRIG) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_EXTTRIG) != RESET) + { + /* Clear Trigger detected flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_EXTTRIG); + + /* Trigger detected callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->TriggerCallback(hlptim); +#else + HAL_LPTIM_TriggerCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Compare write interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPOK) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPOK) != RESET) + { + /* Clear Compare write flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Compare write Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->CompareWriteCallback(hlptim); +#else + HAL_LPTIM_CompareWriteCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Autoreload write interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARROK) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARROK) != RESET) + { + /* Clear Autoreload write flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Autoreload write Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->AutoReloadWriteCallback(hlptim); +#else + HAL_LPTIM_AutoReloadWriteCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Direction counter changed from Down to Up interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UP) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UP) != RESET) + { + /* Clear Direction counter changed from Down to Up flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UP); + + /* Direction counter changed from Down to Up Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->DirectionUpCallback(hlptim); +#else + HAL_LPTIM_DirectionUpCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Direction counter changed from Up to Down interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_DOWN) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_DOWN) != RESET) + { + /* Clear Direction counter changed from Up to Down flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DOWN); + + /* Direction counter changed from Up to Down Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->DirectionDownCallback(hlptim); +#else + HAL_LPTIM_DirectionDownCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Compare match callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_CompareMatchCallback could be implemented in the user file + */ +} + +/** + * @brief Autoreload match callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_AutoReloadMatchCallback could be implemented in the user file + */ +} + +/** + * @brief Trigger detected callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Compare write callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_CompareWriteCallback could be implemented in the user file + */ +} + +/** + * @brief Autoreload write callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_AutoReloadWriteCallback could be implemented in the user file + */ +} + +/** + * @brief Direction counter changed from Down to Up callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_DirectionUpCallback could be implemented in the user file + */ +} + +/** + * @brief Direction counter changed from Up to Down callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_DirectionDownCallback could be implemented in the user file + */ +} + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User LPTIM callback to be used instead of the weak predefined callback + * @param hlptim LPTIM handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_LPTIM_MSPINIT_CB_ID LPTIM Base Msp Init Callback ID + * @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID LPTIM Base Msp DeInit Callback ID + * @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare match Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_MATCH_CB_ID Auto-reload match Callback ID + * @arg @ref HAL_LPTIM_TRIGGER_CB_ID External trigger event detection Callback ID + * @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare register write complete Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_WRITE_CB_ID Auto-reload register write complete Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Up-counting direction change Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Down-counting direction change Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *hlptim, + HAL_LPTIM_CallbackIDTypeDef CallbackID, + pLPTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hlptim); + + if (hlptim->State == HAL_LPTIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + hlptim->MspInitCallback = pCallback; + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + hlptim->MspDeInitCallback = pCallback; + break; + + case HAL_LPTIM_COMPARE_MATCH_CB_ID : + hlptim->CompareMatchCallback = pCallback; + break; + + case HAL_LPTIM_AUTORELOAD_MATCH_CB_ID : + hlptim->AutoReloadMatchCallback = pCallback; + break; + + case HAL_LPTIM_TRIGGER_CB_ID : + hlptim->TriggerCallback = pCallback; + break; + + case HAL_LPTIM_COMPARE_WRITE_CB_ID : + hlptim->CompareWriteCallback = pCallback; + break; + + case HAL_LPTIM_AUTORELOAD_WRITE_CB_ID : + hlptim->AutoReloadWriteCallback = pCallback; + break; + + case HAL_LPTIM_DIRECTION_UP_CB_ID : + hlptim->DirectionUpCallback = pCallback; + break; + + case HAL_LPTIM_DIRECTION_DOWN_CB_ID : + hlptim->DirectionDownCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hlptim->State == HAL_LPTIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + hlptim->MspInitCallback = pCallback; + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + hlptim->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hlptim); + + return status; +} + +/** + * @brief Unregister a LPTIM callback + * LLPTIM callback is redirected to the weak predefined callback + * @param hlptim LPTIM handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_LPTIM_MSPINIT_CB_ID LPTIM Base Msp Init Callback ID + * @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID LPTIM Base Msp DeInit Callback ID + * @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare match Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_MATCH_CB_ID Auto-reload match Callback ID + * @arg @ref HAL_LPTIM_TRIGGER_CB_ID External trigger event detection Callback ID + * @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare register write complete Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_WRITE_CB_ID Auto-reload register write complete Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Up-counting direction change Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Down-counting direction change Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *hlptim, + HAL_LPTIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hlptim); + + if (hlptim->State == HAL_LPTIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + hlptim->MspInitCallback = HAL_LPTIM_MspInit; /* Legacy weak MspInit Callback */ + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; /* Legacy weak Msp DeInit Callback */ + break; + + case HAL_LPTIM_COMPARE_MATCH_CB_ID : + hlptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; /* Legacy weak Compare match Callback */ + break; + + case HAL_LPTIM_AUTORELOAD_MATCH_CB_ID : + hlptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; /* Legacy weak Auto-reload match Callback */ + break; + + case HAL_LPTIM_TRIGGER_CB_ID : + hlptim->TriggerCallback = HAL_LPTIM_TriggerCallback; /* Legacy weak External trigger event detection Callback */ + break; + + case HAL_LPTIM_COMPARE_WRITE_CB_ID : + hlptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; /* Legacy weak Compare register write complete Callback */ + break; + + case HAL_LPTIM_AUTORELOAD_WRITE_CB_ID : + hlptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; /* Legacy weak Auto-reload register write complete Callback */ + break; + + case HAL_LPTIM_DIRECTION_UP_CB_ID : + hlptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; /* Legacy weak Up-counting direction change Callback */ + break; + + case HAL_LPTIM_DIRECTION_DOWN_CB_ID : + hlptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; /* Legacy weak Down-counting direction change Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hlptim->State == HAL_LPTIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + hlptim->MspInitCallback = HAL_LPTIM_MspInit; /* Legacy weak MspInit Callback */ + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; /* Legacy weak Msp DeInit Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hlptim); + + return status; +} +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup LPTIM_Group5 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the LPTIM handle state. + * @param hlptim LPTIM handle + * @retval HAL state + */ +HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim) +{ + /* Return LPTIM handle state */ + return hlptim->State; +} + +/** + * @} + */ + + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup LPTIM_Private_Functions LPTIM Private Functions + * @{ + */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param lptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @retval None + */ +static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim) +{ + /* Reset the LPTIM callback to the legacy weak callbacks */ + lptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; /* Compare match Callback */ + lptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; /* Auto-reload match Callback */ + lptim->TriggerCallback = HAL_LPTIM_TriggerCallback; /* External trigger event detection Callback */ + lptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; /* Compare register write complete Callback */ + lptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; /* Auto-reload register write complete Callback */ + lptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; /* Up-counting direction change Callback */ + lptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; /* Down-counting direction change Callback */ +} +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + +/** + * @brief LPTimer Wait for flag set + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param flag The lptim flag + * @retval HAL status + */ +static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag) +{ + HAL_StatusTypeDef result = HAL_OK; + uint32_t count = TIMEOUT * (SystemCoreClock / 20UL / 1000UL); + do + { + count--; + if (count == 0UL) + { + result = HAL_TIMEOUT; + } + } + while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL)); + + return result; +} + +/** + * @brief Disable LPTIM HW instance. + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @note The following sequence is required to solve LPTIM disable HW limitation. + * Please check Errata Sheet ES0335 for more details under "MCU may remain + * stuck in LPTIM interrupt when entering Stop mode" section. + * @retval None + */ +void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim) +{ + uint32_t tmpclksource = 0; + uint32_t tmpIER; + uint32_t tmpCFGR; + uint32_t tmpCMP; + uint32_t tmpARR; + uint32_t tmpCFGR2; + + __disable_irq(); + + /*********** Save LPTIM Config ***********/ + /* Save LPTIM source clock */ + switch ((uint32_t)hlptim->Instance) + { + case LPTIM1_BASE: + tmpclksource = __HAL_RCC_GET_LPTIM1_SOURCE(); + break; +#if defined(LPTIM2) + case LPTIM2_BASE: + tmpclksource = __HAL_RCC_GET_LPTIM2_SOURCE(); + break; +#endif /* LPTIM2 */ + default: + break; + } + + /* Save LPTIM configuration registers */ + tmpIER = hlptim->Instance->IER; + tmpCFGR = hlptim->Instance->CFGR; + tmpCMP = hlptim->Instance->CMP; + tmpARR = hlptim->Instance->ARR; + tmpCFGR2 = hlptim->Instance->CFGR2; + + /*********** Reset LPTIM ***********/ + switch ((uint32_t)hlptim->Instance) + { + case LPTIM1_BASE: + __HAL_RCC_LPTIM1_FORCE_RESET(); + __HAL_RCC_LPTIM1_RELEASE_RESET(); + break; +#if defined(LPTIM2) + case LPTIM2_BASE: + __HAL_RCC_LPTIM2_FORCE_RESET(); + __HAL_RCC_LPTIM2_RELEASE_RESET(); + break; +#endif /* LPTIM2 */ + default: + break; + } + + /*********** Restore LPTIM Config ***********/ + if ((tmpCMP != 0UL) || (tmpARR != 0UL)) + { + /* Force LPTIM source kernel clock from APB */ + switch ((uint32_t)hlptim->Instance) + { + case LPTIM1_BASE: + __HAL_RCC_LPTIM1_CONFIG(RCC_LPTIM1CLKSOURCE_PCLK1); + break; +#if defined(LPTIM2) + case LPTIM2_BASE: + __HAL_RCC_LPTIM2_CONFIG(RCC_LPTIM2CLKSOURCE_PCLK1); + break; +#endif /* LPTIM2 */ + default: + break; + } + + if (tmpCMP != 0UL) + { + /* Restore CMP register (LPTIM should be enabled first) */ + hlptim->Instance->CR |= LPTIM_CR_ENABLE; + hlptim->Instance->CMP = tmpCMP; + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + hlptim->State = HAL_LPTIM_STATE_TIMEOUT; + } + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + } + + if (tmpARR != 0UL) + { + /* Restore ARR register (LPTIM should be enabled first) */ + hlptim->Instance->CR |= LPTIM_CR_ENABLE; + hlptim->Instance->ARR = tmpARR; + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + hlptim->State = HAL_LPTIM_STATE_TIMEOUT; + } + + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + } + + /* Restore LPTIM source kernel clock */ + switch ((uint32_t)hlptim->Instance) + { + case LPTIM1_BASE: + __HAL_RCC_LPTIM1_CONFIG(tmpclksource); + break; +#if defined(LPTIM2) + case LPTIM2_BASE: + __HAL_RCC_LPTIM2_CONFIG(tmpclksource); + break; +#endif /* LPTIM2 */ + default: + break; + } + } + + /* Restore configuration registers (LPTIM should be disabled first) */ + hlptim->Instance->CR &= ~(LPTIM_CR_ENABLE); + hlptim->Instance->IER = tmpIER; + hlptim->Instance->CFGR = tmpCFGR; + hlptim->Instance->CFGR2 = tmpCFGR2; + + __enable_irq(); +} +/** + * @} + */ +#endif /* LPTIM1 || LPTIM2 */ + +#endif /* HAL_LPTIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_msp_template.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_msp_template.c new file mode 100644 index 0000000..8c17ee0 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_msp_template.c @@ -0,0 +1,101 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_msp_template.c + * @author MCD Application Team + * @brief HAL MSP module. + * This file template is located in the HAL folder and should be copied + * to the user folder. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_MSP HAL MSP module driver + * @brief HAL MSP module. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HAL_MSP_Private_Functions + * @{ + */ + +/** + * @brief Initialize the Global MSP. + * @retval None + */ +void HAL_MspInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief DeInitialize the Global MSP. + * @retval None + */ +void HAL_MspDeInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief Initialize the PPP MSP. + * @retval None + */ +void HAL_PPP_MspInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief DeInitialize the PPP MSP. + * @retval None + */ +void HAL_PPP_MspDeInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c new file mode 100644 index 0000000..251bc3f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c @@ -0,0 +1,2154 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_DRD_FS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ + +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + hpcd->IN_ep[i].tx_fifo_num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + (void)USB_DevInit(hpcd->Instance, hpcd->Init); + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; + + /* Activate LPM */ + if (hpcd->Init.lpm_enable == 1U) + { + (void)HAL_PCDEx_ActivateLPM(hpcd); + } + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callabck is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD BCD Callback + * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD BCD Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD BCD Callback + * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD LPM Callback + * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD LPM Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD LPM Callback + * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_ENABLE(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + + +/** + * @brief This function handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + (void)PCD_EP_ISR_Handler(hpcd); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + (void)HAL_PCD_SetAddress(hpcd, 0U); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) + { + hpcd->Instance->CNTR &= ~(USB_CNTR_SUSPRDY); + hpcd->Instance->CNTR &= ~(USB_CNTR_SUSPEN); + + if (hpcd->LPM_State == LPM_L1) + { + hpcd->LPM_State = LPM_L0; +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) + { + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + + hpcd->Instance->CNTR |= USB_CNTR_SUSPRDY; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /* Handle LPM Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_L1REQ)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_L1REQ); + if (hpcd->LPM_State == LPM_L0) + { + /* Force suspend and low-power mode before going to L1 state*/ + hpcd->Instance->CNTR |= USB_CNTR_SUSPRDY; + hpcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + hpcd->LPM_State = LPM_L1; + hpcd->BESL = ((uint32_t)hpcd->Instance->LPMCSR & USB_LPMCSR_BESL) >> 2; +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); + } +} + + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + if (ep->is_in != 0U) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_fill_db = 1U; + ep->xfer_len_db = len; + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(ep_addr); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) +{ + return hpcd->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ + + +/** + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + PCD_EPTypeDef *ep; + uint16_t count, wIstr, wEPVal, TxByteNbre; + uint8_t epindex; + + /* stay in loop while pending interrupts */ + while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) + { + wIstr = (uint16_t)hpcd->Instance->ISTR; + + /* extract highest priority endpoint number */ + epindex = (uint8_t)(wIstr & USB_ISTR_IDN); + + if (epindex == 0U) + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0U) + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + ep = &hpcd->IN_ep[0]; + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff += ep->xfer_count; + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, 0U); +#else + HAL_PCD_DataInStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) + { + hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); + hpcd->USB_Address = 0U; + } + } + else + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + wEPVal = (uint16_t)PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if ((wEPVal & USB_EP_SETUP) != 0U) + { + /* Get SETUP Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + ep->pmaadress, (uint16_t)ep->xfer_count); + + /* SETUP bit kept frozen while CTR_RX = 1 */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Process SETUP Packet*/ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else if ((wEPVal & USB_EP_VTRX) != 0U) + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Get Control Data OUT Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + ep->pmaadress, (uint16_t)ep->xfer_count); + + ep->xfer_buff += ep->xfer_count; + + /* Process Control Data OUT Packet */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, 0U); +#else + HAL_PCD_DataOutStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } + } + } + else + { + /* Decode and service non control endpoints interrupt */ + /* process related endpoint register */ + wEPVal = (uint16_t)PCD_GET_ENDPOINT(hpcd->Instance, epindex); + + if ((wEPVal & USB_EP_VTRX) != 0U) + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); + ep = &hpcd->OUT_ep[epindex]; + + /* OUT Single Buffering */ + if (ep->doublebuffer == 0U) + { + count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + } + } + else + { + /* manage double buffer bulk out */ + if (ep->type == EP_TYPE_BULK) + { + count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); + } + else /* manage double buffer iso out */ + { + /* free EP OUT Buffer */ + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + + if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) + { + /* read from endpoint BUF0Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /* read from endpoint BUF1Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + } + } + /* multi-packet on the NON control OUT endpoint */ + ep->xfer_count += count; + ep->xfer_buff += count; + + if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) + { + /* RX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataOutStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + (void) USB_EPStartXfer(hpcd->Instance, ep); + } + + } + + if ((wEPVal & USB_EP_VTTX) != 0U) + { + ep = &hpcd->IN_ep[epindex]; + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); + + /* Manage all non bulk transaction or Bulk Single Buffer Transaction */ + if ((ep->type != EP_TYPE_BULK) || + ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Transfer is not yet Done */ + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + } + /* bulk in double buffer enable in case of transferLen> Ep_Mps */ + else + { + (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); + } + } + } + } + + return HAL_OK; +} + + +/** + * @brief Manage double buffer bulk out transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint16_t count; + + /* Manage Buffer0 OUT */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + /* Get count of received Data on buffer0 */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK to OUT endpoint since double buffer is enabled */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /* Check if Buffer1 is in blocked state which requires to toggle */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + /* Manage Buffer 1 DTOG_RX=0 */ + else + { + /* Get count of received data */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK on the current endpoint */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /*Need to FreeUser Buffer*/ + if ((wEPVal & USB_EP_DTOG_TX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + + return count; +} + + +/** + * @brief Manage double buffer bulk IN transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint32_t len; + uint16_t TxByteNbre; + + /* Data Buffer0 ACK received */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + ep->xfer_fill_db = 0U; + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Write remaining Data to Buffer */ + /* Set the Double buffer counter for pma buffer1 */ + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); + } + } + } + else /* Data Buffer1 ACK received */ + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + /*need to Free USB Buff*/ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + ep->xfer_fill_db = 0; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy the user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); + } + } + } + + /*enable endpoint IN*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + + return HAL_OK; +} + + + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c new file mode 100644 index 0000000..63412e4 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c @@ -0,0 +1,336 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_DRD_FS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ + +/** + * @brief Configure PMA for EP + * @param hpcd Device instance + * @param ep_addr endpoint address + * @param ep_kind endpoint Kind + * USB_SNG_BUF: Single Buffer used + * USB_DBL_BUF: Double Buffer used + * @param pmaadress: EP address in The PMA: In case of single buffer endpoint + * this parameter is 16-bit value providing the address + * in PMA allocated to endpoint. + * In case of double buffer endpoint this parameter + * is a 32-bit value providing the endpoint buffer 0 address + * in the LSB part of 32-bit value and endpoint buffer 1 address + * in the MSB part of 32-bit value. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress) +{ + PCD_EPTypeDef *ep; + + /* initialize ep structure*/ + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + { + /* Single Buffer */ + ep->doublebuffer = 0U; + /* Configure the PMA */ + ep->pmaadress = (uint16_t)pmaadress; + } + else /* USB_DBL_BUF */ + { + /* Double Buffer Endpoint */ + ep->doublebuffer = 1U; + /* Configure the PMA */ + ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); + ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); + } + + return HAL_OK; +} + +/** + * @brief Activate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->battery_charging_active = 1U; + + /* Enable BCD feature */ + USBx->BCDR |= USB_BCDR_BCDEN; + + /* Enable DCD : Data Contact Detect */ + USBx->BCDR &= ~(USB_BCDR_PDEN); + USBx->BCDR &= ~(USB_BCDR_SDEN); + USBx->BCDR |= USB_BCDR_DCDEN; + + return HAL_OK; +} + +/** + * @brief Deactivate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->battery_charging_active = 0U; + + /* Disable BCD feature */ + USBx->BCDR &= ~(USB_BCDR_BCDEN); + + return HAL_OK; +} + +/** + * @brief Handle BatteryCharging Process. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + uint32_t tickstart = HAL_GetTick(); + + /* Wait Detect flag or a timeout is happen*/ + while ((USBx->BCDR & USB_BCDR_DCDET) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > 1000U) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + return; + } + } + + HAL_Delay(200U); + + /* Data Pin Contact ? Check Detect flag */ + if ((USBx->BCDR & USB_BCDR_DCDET) == USB_BCDR_DCDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + /* Primary detection: checks if connected to Standard Downstream Port + (without charging capability) */ + USBx->BCDR &= ~(USB_BCDR_DCDEN); + HAL_Delay(50U); + USBx->BCDR |= (USB_BCDR_PDEN); + HAL_Delay(50U); + + /* If Charger detect ? */ + if ((USBx->BCDR & USB_BCDR_PDET) == USB_BCDR_PDET) + { + /* Start secondary detection to check connection to Charging Downstream + Port or Dedicated Charging Port */ + USBx->BCDR &= ~(USB_BCDR_PDEN); + HAL_Delay(50U); + USBx->BCDR |= (USB_BCDR_SDEN); + HAL_Delay(50U); + + /* If CDP ? */ + if ((USBx->BCDR & USB_BCDR_SDET) == USB_BCDR_SDET) + { + /* Dedicated Downstream Port DCP */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Charging Downstream Port CDP */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else /* NO */ + { + /* Standard Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /* Battery Charging capability discovery finished Start Enumeration */ + (void)HAL_PCDEx_DeActivateBCD(hpcd); +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} + + +/** + * @brief Activate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) +{ + + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->lpm_active = 1U; + hpcd->LPM_State = LPM_L0; + + USBx->LPMCSR |= USB_LPMCSR_LMPEN; + USBx->LPMCSR |= USB_LPMCSR_LPMACK; + + return HAL_OK; +} + +/** + * @brief Deactivate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 0U; + + USBx->LPMCSR &= ~(USB_LPMCSR_LMPEN); + USBx->LPMCSR &= ~(USB_LPMCSR_LPMACK); + + return HAL_OK; +} + + + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c new file mode 100644 index 0000000..bd2bf99 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c @@ -0,0 +1,545 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Defines PWR Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset + values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + [..] + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pins are used to wakeup the system from Standby mode or + Shutdown mode. WakeUp pins polarity can be set to configure event + detection on high level (rising edge) or low level (falling edge). + + *** Low Power mode configuration *** + ===================================== + [..] + The devices feature 7 low-power modes: + (+) Low-power run mode: core and peripherals are running at low frequency. + Regulator is in low power mode. + (+) Sleep mode: Cortex-M0+ core stopped, peripherals kept running, + regulator is main mode. + (+) Low-power Sleep mode: Cortex-M0+ core stopped, peripherals kept running + and regulator in low power mode. + (+) Stop 0 mode: all clocks are stopped except LSI and LSE, regulator is + main mode. + (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator + off, low power regulator on. + (+) Standby mode: all clocks are stopped except LSI and LSE, regulator is + disable. + (+) Shutdown mode: all clocks are stopped except LSE, regulator is + disable. + + *** Low-power run mode *** + ========================== + [..] + (+) Entry: (from main run mode) + (++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after + having decreased the system clock below 2 MHz. + (+) Exit: + (++) clear LPR bit then wait for REGLPF bit to be reset with + HAL_PWREx_DisableLowPowerRunMode() API. Only then can the + system clock frequency be increased above 2 MHz. + + *** Sleep mode / Low-power sleep mode *** + ========================================= + [..] + (+) Entry: + The Sleep & Low-power Sleep modes are entered through + HAL_PWR_EnterSLEEPMode() API specifying whether or not the regulator + is forced to low-power mode and if exit is interrupt or event + triggered. + (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode). + (++) PWR_LOWPOWERREGULATOR_ON: Low-power Sleep mode (regulator in low + power mode). In this case, the system clock frequency must have + been decreased below 2 MHz beforehand. + (++) PWR_SLEEPENTRY_WFI: Core enters sleep mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: Core enters sleep mode with WFE instruction + (+) WFI Exit: + (++) Any interrupt enabled in nested vectored interrupt controller (NVIC) + (+) WFE Exit: + (++) Any wakeup event if cortex is configured with SEVONPEND = 0 + (++) Interrupt even when disabled in NVIC if cortex is configured with + SEVONPEND = 1 + [..] When exiting the Low-power Sleep mode by issuing an interrupt or a wakeup event, + the MCU is in Low-power Run mode. + + *** Stop 0 & Stop 1 modes *** + ============================= + [..] + (+) Entry: + The Stop modes are entered through the following APIs: + (++) HAL_PWR_EnterSTOPMode() with following settings: + (+++) PWR_MAINREGULATOR_ON to enter STOP0 mode. + (+++) PWR_LOWPOWERREGULATOR_ON to enter STOP1 mode. + (+) Exit (interrupt or event-triggered, specified when entering STOP mode): + (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction + (+) WFI Exit: + (++) Any EXTI line (internal or external) configured in interrupt mode + with corresponding interrupt enable in NVIC + (+) WFE Exit: + (++) Any EXTI line (internal or external) configured in event mode if + cortex is configured with SEVONPEND = 0 + (++) Any EXTI line configured in interrupt mode (even if the + corresponding EXTI Interrupt vector is disabled in the NVIC) if + cortex is configured with SEVONPEND = 0. The interrupt source can + be external interrupts or peripherals with wakeup capability. + [..] When exiting Stop, the MCU is either in Run mode or in Low-power Run mode + depending on the LPR bit setting. + + *** Standby mode *** + ==================== + [..] In Standby mode, it is possible to keep backup SRAM content (defined as + full SRAM) keeping low power regulator on. This is achievable by setting + Ram retention bit calling HAL_PWREx_EnableSRAMRetention API. This increases + power consumption. + Its also possible to define I/O states using APIs: + HAL_PWREx_EnableGPIOPullUp, HAL_PWREx_EnableGPIOPullDown & + HAL_PWREx_EnablePullUpPullDownConfig + (+) Entry: + (++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API, by + setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp), + tamper event (internal & external), LSE CSS detection, reset on + NRST pin, IWDG reset & BOR reset. + [..] Exiting Standby generates a power reset: Cortex is reset and execute + Reset handler vector, all registers in the Vcore domain are set to + their reset value. Registers outside the VCORE domain (RTC, WKUP, IWDG, + and Standby/Shutdown modes control) are not impacted. + + *** Shutdown mode *** + ====================== + [..] + In Shutdown mode, + voltage regulator is disabled, all clocks are off except LSE, RRS bit is + cleared. SRAM and registers contents are lost except for backup domain + registers. + (+) Entry: + (++) The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API, + by setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp), + tamper event (internal & external), LSE CSS detection, reset on + NRST pin. + [..] Exiting Shutdown generates a brown out reset: Cortex is reset and execute + Reset handler vector, all registers are set to their reset value but ones + in backup domain. + +@endverbatim + * @{ + */ + +/** + * @brief Enable access to the backup domain + * (RTC & TAMP registers, backup registers, RCC BDCR register). + * @note After reset, the backup domain is protected against + * possible unwanted write accesses. All RTC & TAMP registers (backup + * registers included) and RCC BDCR register are concerned. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + + +/** + * @brief Disable access to the backup domain + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values which set + * the default polarity i.e. detection on high level (rising edge): + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3(*), + * PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6 + * or one of the following value where the user can explicitly specify + * the enabled pin and the chosen polarity: + * @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW + * @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW + * @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW (*) + * @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW + * @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW (*) + * @arg @ref PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @note (*) availability depends on devices + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); + + /* Specifies the Wake-Up pin polarity for the event detection + (rising or falling edge) */ + MODIFY_REG(PWR->CR4, (PWR_CR4_WP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); + + /* Enable wake-up pin */ + SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity)); +} + + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2,PWR_WAKEUP_PIN3(*), + * PWR_WAKEUP_PIN4,PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6 + * @note (*) availability depends on devices + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx)); +} + + +/** + * @brief Enter Sleep or Low-power Sleep mode. + * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as + * in Run mode. + * @param Regulator Specifies the regulator state in Sleep/Low-power Sleep + * mode. This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator + * in low-power mode) + * @note Low-power Sleep mode is entered from Low-power Run mode only. In + * case Regulator parameter is set to Low Power but MCU is in Run mode, + * we will first enter in Low-power Run mode. Therefore, user should + * take care that HCLK frequency is less than 2 MHz. + * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. + * To switch back to Run mode, user must call + * HAL_PWREx_DisableLowPowerRunMode() API. + * @param SLEEPEntry Specifies if Sleep mode is entered with WFI or WFE + * instruction. This parameter can be one of the following values: + * @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep + * mode with WFI instruction + * @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep + * mode with WFE instruction + * @note When WFI entry is used, tick interrupt have to be disabled if not + * desired as the interrupt wake up source. + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Set Regulator parameter */ + if(Regulator != PWR_MAINREGULATOR_ON) + { + /* If in run mode, first move to low-power run mode. + The system clock frequency must be below 2 MHz at this point. */ + if((PWR->SR2 & PWR_SR2_REGLPF) == 0x00u) + { + HAL_PWREx_EnableLowPowerRunMode(); + } + } + else + { + /* If in low-power run mode at this point, exit it */ + if((PWR->SR2 & PWR_SR2_REGLPF) != 0x00u) + { + if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK) + { + return ; + } + } + } + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + + +/** + * @brief Enter Stop mode + * @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with + * legacy code running on devices where only "Stop mode" is mentioned + * with main or low power regulator ON. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the HSI and the + * HSE oscillators are disabled. Some peripherals with the wakeup + * capability can switch on the HSI to receive a frame, and switch off + * the HSI after receiving the frame if it is not a wakeup frame. + * SRAM and register contents are preserved. + * The BOR is available. + * The voltage regulator can be configured either in normal (Stop 0) or + * low-power mode (Stop 1). + * @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a + * wakeup event, the HSI RC oscillator is selected as system clock + * @note When the voltage regulator operates in low power mode (Stop 1), + * an additional startup delay is incurred when waking up. By keeping + * the internal regulator ON during Stop mode (Stop 0), the consumption + * is higher although the startup time is reduced. + * @param Regulator Specifies the regulator state in Stop mode + * This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power + * regulator ON) + * @param STOPEntry Specifies Stop 0 or Stop 1 mode is entered with WFI or + * WFE instruction. This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI + * instruction. + * @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE + * instruction. + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + if (Regulator != PWR_MAINREGULATOR_ON) + { + /* Stop mode with Low-Power Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP1); + } + else + { + /* Stop mode with Main Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP0); + } + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Standby mode. + * @note In Standby mode, the PLL, the HSI and the HSE oscillators are + * switched off. The voltage regulator is disabled. SRAM and register + * contents are lost except for registers in the Backup domain and + * Standby circuitry. BOR is available. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note Sram content can be kept setting RRS through HAL_PWREx_EnableSRAMRetention() + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Set Stand-by mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STANDBY); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + + /* Request Wait For Interrupt */ + __WFI(); +} + + +/** + * @brief Enable Sleep-On-Exit Cortex feature + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over returning to thread mode. Setting this bit is + * useful when the processor is expected to run only on interruptions + * handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disable Sleep-On-Exit Cortex feature + * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Enable Cortex Sev On Pending feature. + * @note Set SEVONPEND bit of SCR register. When this bit is set, enabled + * events and all interrupts, including disabled ones can wakeup + * processor from WFE. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disable Cortex Sev On Pending feature. + * @note Clear SEVONPEND bit of SCR register. When this bit is clear, only + * enable interrupts or events can wakeup processor from WFE + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c new file mode 100644 index 0000000..0f60295 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c @@ -0,0 +1,1019 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +#if defined(PWR_PVD_SUPPORT) +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT 0x00010000U /*!< Mask for interruption yielded + by PVD threshold crossing */ +#define PVD_MODE_EVT 0x00020000U /*!< Mask for event yielded + by PVD threshold crossing */ +#define PVD_RISING_EDGE 0x00000001U /*!< Mask for rising edge set as + PVD trigger */ +#define PVD_FALLING_EDGE 0x00000002U /*!< Mask for falling edge set as + PVD trigger */ +/** + * @} + */ +#endif + +/** @defgroup PWREx_TimeOut_Value PWREx Flag Setting Time Out Value + * @{ + */ +#define PWR_REGLPF_SETTING_DELAY_6_US 6u /*!< REGLPF should rise in about 5 us plus + 2 APB clock. Taking in account max Sysclk at + 2 MHz, and rounded to upper value */ + +#define PWR_VOSF_SETTING_DELAY_6_US 6u /*!< VOSF should rise in about 5 us plus + 2 APB clock. Taking in account max Sysclk at + 16 MHz, and rounded to upper value */ +/** + * @} + */ + +/** @defgroup PWREx_Gpio_Pin_Number PWREx Gpio Pin Number + * @{ + */ +#define PWR_GPIO_PIN_NB 16u /*!< Number of gpio pin in bank */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Initialization and de-initialization functions ##### + =============================================================================== + [..] + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PVDRT[2:0] & PVDFT[2:0] bits in + PWR CR2 register). + (+) PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line 16 and can generate an interrupt if enabled. + (+) The PVD is stopped in Standby & Shutdown mode. + + *** PVM configuration *** + ========================= + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Enable battery charging. + * @note When VDD is present, charge the external battery on VBAT through an + * internal resistor. + * @param ResistorSelection specifies the resistor impedance. + * This parameter can be one of the following values: + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_5 5 kOhms resistor + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_1_5 1.5 kOhms resistor + * @retval None + */ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection) +{ + uint32_t tmpreg; + assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorSelection)); + + /* Specify resistor selection and enable battery charging */ + tmpreg = (PWR->CR4 & ~PWR_CR4_VBRS); + PWR->CR4 = (tmpreg | ResistorSelection | PWR_CR4_VBE); +} + + +/** + * @brief Disable battery charging. + * @retval None + */ +void HAL_PWREx_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + +#if defined(PWR_CR3_ENB_ULP) +/** + * @brief Enable POR Monitor sampling mode. + * @note When entering ultra low power modes (standby, shutdown) this feature + * can be enabled to reduce further consumption: Power On Reset monitor + * is then set in sampling mode, and no more in always on mode. + * @retval None + */ +void HAL_PWREx_EnablePORMonitorSampling(void) +{ + PWR->CR3 |= PWR_CR3_ENB_ULP; +} + + +/** + * @brief Disable POR Monitor sampling mode. + * @retval None + */ +void HAL_PWREx_DisablePORMonitorSampling(void) +{ + PWR->CR3 &= ~PWR_CR3_ENB_ULP; +} +#endif + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Configure the Power Voltage Detector (PVD). + * @param sConfigPVD pointer to a PWR_PVDTypeDef structure that contains the + PVD configuration information: threshold levels, operating mode. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level. + * @note User should take care that rising threshold is higher than falling + * one in order to avoid having always PVDO output set. + * @retval HAL_OK + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PVD level bits only according to PVDLevel value */ + MODIFY_REG(PWR->CR2, (PWR_CR2_PVDFT | PWR_CR2_PVDRT), sConfigPVD->PVDLevel); + + /* Clear any previous config, in case no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } + + return HAL_OK; +} + + +/** + * @brief Enable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWREx_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + + +/** + * @brief Disable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWREx_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} +#endif + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Enable VDDUSB supply. + * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Disable VDDUSB supply. + * @retval None + */ +void HAL_PWREx_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} +#endif + +#if defined(PWR_CR2_IOSV) +/** + * @brief Enable VDDIO2 supply. + * @note Remove VDDIO2 electrical and logical isolation, once VDDIO2 supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + + +/** + * @brief Disable VDDIO2 supply. + * @retval None + */ +void HAL_PWREx_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} +#endif /* PWR_CR2_IOSV */ + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Enable the Power Voltage Monitoring for USB peripheral (power domain Vddio2) + * @retval None + */ +void HAL_PWREx_EnablePVMUSB(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_USB); +} + +/** + * @brief Disable the Power Voltage Monitoring for USB peripheral (power domain Vddio2) + * @retval None + */ +void HAL_PWREx_DisablePVMUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_USB); +} +#endif + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Configure the Peripheral Voltage Monitoring (PVM). + * @param sConfigPVM: pointer to a PWR_PVMTypeDef structure that contains the + * PVM configuration information. + * @note The API configures a single PVM according to the information contained + * in the input structure. To configure several PVMs, the API must be singly + * called for each PVM used. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level and to each monitored supply. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_PVM_TYPE(sConfigPVM->PVMType)); + assert_param(IS_PWR_PVM_MODE(sConfigPVM->Mode)); + + /* Configure EXTI 34 interrupts if so required: + scan through PVMType to detect which PVMx is set and + configure the corresponding EXTI line accordingly. */ + switch (sConfigPVM->PVMType) + { + case PWR_PVM_USB: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM_EXTI_DISABLE_IT(); + __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); + } + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif +/** + * @brief Enable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_EnableInternalWakeUpLine(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Disable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_DisableInternalWakeUpLine(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes. + * @note Set the relevant PUy bit of PWR_PUCRx register to configure the I/O in + * pull-up state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PDy bit of PWR_PDCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PUCRB, GPIONumber); + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PUCRC, GPIONumber); + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; + + case PWR_GPIO_D: + SET_BIT(PWR->PUCRD, GPIONumber); + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; + +#if defined(GPI0E) + case PWR_GPIO_E: + SET_BIT(PWR->PUCRE, GPIONumber); + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + SET_BIT(PWR->PUCRF, GPIONumber); + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-up state in Standby mode and Shutdown modes. + * @note Reset the relevant PUy bit of PWR_PUCRx register used to configure the I/O + * in pull-up state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; + + case PWR_GPIO_D: + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; + +#if defined(GPI0E) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes. + * @note Set the relevant PDy bit of PWR_PDCRx register to configure the I/O in + * pull-down state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PUy bit of PWR_PUCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PDCRB, GPIONumber); + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PDCRC, GPIONumber); + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; + + case PWR_GPIO_D: + SET_BIT(PWR->PDCRD, GPIONumber); + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; + +#if defined(GPIOE) + case PWR_GPIO_E: + SET_BIT(PWR->PDCRE, GPIONumber); + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + SET_BIT(PWR->PDCRF, GPIONumber); + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes. + * @note Reset the relevant PDy bit of PWR_PDCRx register used to configure the I/O + * in pull-down state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; + + case PWR_GPIO_D: + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; + +#if defined(GPIOE) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif + case PWR_GPIO_F: + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are applied in Standby and Shutdown modes. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding + * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() APIs ensure there + * is no conflict when setting PUy or PDy bit. + * @retval None + */ +void HAL_PWREx_EnablePullUpPullDownConfig(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are not applied in Standby and Shutdown modes. + * @retval None + */ +void HAL_PWREx_DisablePullUpPullDownConfig(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + +#if defined(PWR_CR3_RRS) +/** + * @brief Enable SRAM content retention in Standby mode. + * @note When RRS bit is set, SRAM is powered by the low-power regulator in + * Standby mode and its content is kept. + * @retval None + */ +void HAL_PWREx_EnableSRAMRetention(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_RRS); +} + + +/** + * @brief Disable SRAM content retention in Standby mode. + * @note When RRS bit is reset, SRAM is powered off in Standby mode + * and its content is lost. + * @retval None + */ +void HAL_PWREx_DisableSRAMRetention(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); +} +#endif + +/** + * @brief Enable Flash Power Down. + * @note This API allows to enable flash power down capabilities in low power + * run, low power sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_LPRUN + * @arg @ref PWR_FLASHPD_LPSLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 |= PowerMode; +} + + +/** + * @brief Disable Flash Power Down. + * @note This API allows to disable flash power down capabilities in low power + * run, low power sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_LPRUN + * @arg @ref PWR_FLASHPD_LPSLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 &= ~PowerMode; +} + + +/** + * @brief Return Voltage Scaling Range. + * @retval VOS bit field: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ + return (PWR->CR1 & PWR_CR1_VOS); +} + + +/** + * @brief Configure the main regulator output voltage. + * @param VoltageScaling specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, + * typical output voltage at 1.2 V, + * system frequency up to 64 MHz. + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, + * typical output voltage at 1.0 V, + * system frequency up to 16 MHz. + * @note When moving from Range 1 to Range 2, the system frequency must be decreased to + * a value below 16 MHz before calling HAL_PWREx_ControlVoltageScaling() API. + * When moving from Range 2 to Range 1, the system frequency can be increased to + * a value up to 64 MHz after calling HAL_PWREx_ControlVoltageScaling() API. + * @note When moving from Range 2 to Range 1, the API waits for VOSF flag to be + * cleared before returning the status. If the flag is not cleared within + * 6 microseconds, HAL_TIMEOUT status is reported. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t wait_loop_index; + + assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); + + /* Modify voltage scaling range */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling); + + /* In case of Range 1 selected, we need to ensure that main regulator reaches new value */ + if(VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + { + /* Set timeout value */ + wait_loop_index = ((PWR_VOSF_SETTING_DELAY_6_US * SystemCoreClock ) / 1000000U) + 1U; + + /* Wait until VOSF is reset */ + while(HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + if(wait_loop_index != 0U) + { + wait_loop_index--; + } + else + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + + + +/** + * @brief Enter Low-power Run mode + * @note System clock frequency has to be decreased below 2 MHz before entering + * low power run mode + * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode. + * @retval None + */ +void HAL_PWREx_EnableLowPowerRunMode(void) +{ + /* Set Regulator parameter */ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + + +/** + * @brief Exit Low-power Run mode. + * @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that + * REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode + * returns HAL_TIMEOUT status). The system clock frequency can then be + * increased above 2 MHz. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) +{ + uint32_t wait_loop_index = ((PWR_REGLPF_SETTING_DELAY_6_US * SystemCoreClock ) / 1000000U) + 1U; + + /* Clear LPR bit */ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); + + /* Wait until REGLPF is reset */ + while(HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) + { + if(wait_loop_index != 0U) + { + wait_loop_index--; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + + +#if defined(PWR_SHDW_SUPPORT) +/** + * @brief Enter Shutdown mode. + * @note In Shutdown mode, the PLL, the HSI, the LSI and the HSE oscillators are switched + * off. The voltage regulator is disabled and Vcore domain is powered off. + * SRAM and registers contents are lost except for registers in the Backup domain. + * The BOR is not available. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @retval None + + * @retval None + */ +void HAL_PWREx_EnterSHUTDOWNMode(void) +{ + /* Set Shutdown mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_SHUTDOWN); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + + /* Request Wait For Interrupt */ + __WFI(); +} +#endif + +#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT) +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_PVM_IRQHandler(void) +{ + /* Check PWR PVD exti Rising flag */ + if(__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD interrupt rising user callback */ + HAL_PWREx_PVD_PVM_Rising_Callback(); + } + + /* Check PWR exti fallling flag */ + if(__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVD interrupt falling user callback */ + HAL_PWREx_PVD_PVM_Falling_Callback(); + } + + /* Check PWR PVM exti Rising flag */ + if(__HAL_PWR_PVM_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVM exti pending bit */ + __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD PVM interrupt rising user callback */ + HAL_PWREx_PVD_PVM_Rising_Callback(); + } + + /* Check PWR PVM exti fallling flag */ + if(__HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVM exti pending bit */ + __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVM interrupt falling user callback */ + HAL_PWREx_PVD_PVM_Falling_Callback(); + } +} + +/** + * @brief PWR PVD interrupt rising callback + * @retval None + */ +__weak void HAL_PWREx_PVD_PVM_Rising_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Rising_Callback can be implemented in the user file + */ +} + +/** + * @brief PWR PVD interrupt Falling callback + * @retval None + */ +__weak void HAL_PWREx_PVD_PVM_Falling_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Falling_Callback can be implemented in the user file + */ +} +#elif defined(PWR_PVD_SUPPORT) +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_IRQHandler(void) +{ + /* Check PWR exti Rising flag */ + if(__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD interrupt rising user callback */ + HAL_PWREx_PVD_Rising_Callback(); + } + + /* Check PWR exti fallling flag */ + if(__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVD interrupt falling user callback */ + HAL_PWREx_PVD_Falling_Callback(); + } +} + +/** + * @brief PWR PVD interrupt rising callback + * @retval None + */ +__weak void HAL_PWREx_PVD_Rising_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Rising_Callback can be implemented in the user file + */ +} + +/** + * @brief PWR PVD interrupt Falling callback + * @retval None + */ +__weak void HAL_PWREx_PVD_Falling_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Falling_Callback can be implemented in the user file + */ +} + +#endif + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c new file mode 100644 index 0000000..36a6bf0 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c @@ -0,0 +1,1437 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from High Speed Internal oscillator + (from 8 MHz to reach 16MHz) with Flash 0 wait state. Flash prefetch buffer, + D-Cache and I-Cache are disabled, and all peripherals are off except internal + SRAM, Flash and JTAG. + + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses: + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analog mode, except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (RTC, ADC, RNG, HSTIM) + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ + +#if defined(RCC_HSI48_SUPPORT) +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#endif /* RCC_HSI48_SUPPORT */ +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ + +#define PLLSOURCE_NONE (0U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +#if defined(RCC_MCO2_SUPPORT) +#define MCO2_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO2_GPIO_PORT GPIOA +#define MCO2_PIN GPIO_PIN_10 +#endif /* RCC_MCO2_SUPPORT */ + +#define RCC_PLL_OSCSOURCE_CONFIG(__HAL_RCC_PLLSOURCE__) \ + (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (uint32_t)(__HAL_RCC_PLLSOURCE__))) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal and external oscillators + (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB) + + [..] Internal/external clock and PLL configuration + (+) HSI (high-speed internal): 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + + (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (+) HSE (high-speed external): 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also optionally as RTC clock source. + + (+) LSE (low-speed external): 32.768 KHz oscillator used optionally as RTC clock source. + + (+) PLL (clocked by HSI, HSE) providing up to three independent output clocks: + (++) The first output (R) is used to generate the high speed system clock (up to 64MHz). + (++) The second output(Q) is used to generate the clock for the random analog generator and HStim. + (++) The Third output (P) is used to generate the clock for the Analog to Digital Converter and I2S. + + (+) CSS (Clock security system): once enabled, if a HSE or LSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched respectively to HSI or LSI and an interrupt is generated + if enabled. The interrupt is linked to the Cortex-M0+ NMI (Non-Maskable Interrupt) + exception vector. + + (+) MCOx (microcontroller clock output): + (++) MCO1 used to output LSI, HSI48(*), HSI, LSE, HSE or main PLL clock (through a configurable prescaler) on PA8 pin. + (++) MCO2(*) used to output LSI, HSI48(*), HSI, LSE, HSE, main PLLR clock, PLLQ clock, PLLP clock, RTC clock or RTC_Wakeup (through a configurable prescaler) on PA10 pin. + (*) available on certain devices only + + [..] System, AHB and APB buses clocks configuration + (+) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE, LSI, LSE and main PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...).and APB (PCLK1) clock is derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + + (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 31. + You have to use @ref __HAL_RCC_RTC_ENABLE() and @ref HAL_RCCEx_PeriphCLKConfig() function + to configure this clock. + + (+@) RNG(*) requires a frequency equal or lower than 48 MHz. + This clock is derived from the main PLL or HSI or System clock. + (*) available on certain devices only + + (+@) IWDG clock which is always the LSI clock. + + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK is 64 MHz. + Depending on the device voltage range, the maximum frequency should be + adapted accordingly. + + @endverbatim + + (++) Table 1. HCLK clock frequency. + (++) +-------------------------------------------------------+ + (++) | Latency | HCLK clock frequency (MHz) | + (++) | |-------------------------------------| + (++) | | voltage range 1 | voltage range 2 | + (++) | | 1.2 V | 1.0 V | + (++) |-----------------|------------------|------------------| + (++) |0WS(1 CPU cycles)| HCLK <= 24 | HCLK <= 8 | + (++) |-----------------|------------------|------------------| + (++) |1WS(2 CPU cycles)| HCLK <= 48 | HCLK <= 16 | + (++) |-----------------|------------------|------------------| + (++) |2WS(3 CPU cycles)| HCLK <= 64 | - | + (++) |-----------------|------------------|------------------| + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL OFF + * - AHB and APB prescaler set to 1. + * - CSS, MCO1 OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Set HSION bit to the reset value */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[6:0] bits to the reset value */ + RCC->ICSCR = RCC_ICSCR_HSITRIM_6; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Reset CFGR register (HSI is selected as system clock source) */ + RCC->CFGR = 0x00000000u; + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Clear CR register in 2 steps: first to clear HSEON in case bypass was enabled */ + RCC->CR = RCC_CR_HSION; + + /* Then again to HSEBYP in case bypass was enabled */ + RCC->CR = RCC_CR_HSION; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* once PLL is OFF, reset PLLCFGR register to default value */ + RCC->PLLCFGR = RCC_PLLCFGR_PLLN_4; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000u; + + /* Clear all flags */ + RCC->CICR = 0xFFFFFFFFu; + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Initialize the RCC Oscillators according to the specified parameters in the + * @ref RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to a @ref RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this function. User should request a transition to HSE Off + * first and then to HSE On or HSE Bypass. + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this function. User should request a transition to LSE Off + * first and then to LSE On or LSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t temp_sysclksrc; + uint32_t temp_pllckcfg; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE(); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSE)) || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSE)) + { + if ((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + assert_param(IS_RCC_HSIDIV(RCC_OscInitStruct->HSIDiv)); + + /* Check if HSI16 is used as system clock or as PLL source when PLL is selected as system clock */ + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE(); + if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSI)) || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI)) + { + /* When HSI is used as system clock or as PLL input clock it can not be disabled */ + if ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + + if (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI) + { + /* Adjust the HSI16 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Update the SystemCoreClock global variable with HSISYS value */ + SystemCoreClock = (HSI_VALUE / (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos))); + } + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + } + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Configure the HSI16 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Enable the Internal High Speed oscillator (HSI16). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI16). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check if LSI is used as system clock */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSI) + { + /* When LSI is used as system clock it will not be disabled */ + if ((((RCC->CSR) & RCC_CSR_LSIRDY) != 0U) && (RCC_OscInitStruct->LSIState == RCC_LSI_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* When the LSE is used as system clock, it is not allowed disable it */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSE) + { + if ((((RCC->BDCR) & RCC_BDCR_LSERDY) != 0U) && (RCC_OscInitStruct->LSEState == RCC_LSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED() != 0U) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + } +#if defined(RCC_HSI48_SUPPORT) + /*------------------------------ HSI48 Configuration -----------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the LSI State */ + if (RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } +#endif /* RCC_HSI48_SUPPORT */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + + if (RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if (RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); +#if defined(RCC_PLLQ_SUPPORT) + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); +#endif /* RCC_PLLQ_SUPPORT */ + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, +#if defined(RCC_PLLQ_SUPPORT) + RCC_OscInitStruct->PLL.PLLQ, +#endif /* RCC_PLLQ_SUPPORT */ + RCC_OscInitStruct->PLL.PLLR); + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLLR Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLRCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Disable all PLL outputs to save power */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSOURCE_NONE); + +#if defined(RCC_PLLQ_SUPPORT) + __HAL_RCC_PLLCLKOUT_DISABLE(RCC_PLLCFGR_PLLPEN | RCC_PLLCFGR_PLLQEN | RCC_PLLCFGR_PLLREN); +#else + __HAL_RCC_PLLCLKOUT_DISABLE(RCC_PLLCFGR_PLLPEN | RCC_PLLCFGR_PLLREN); +#endif /* RCC_PLLQ_SUPPORT */ + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + temp_pllckcfg = RCC->PLLCFGR; + if ((READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLP) != RCC_OscInitStruct->PLL.PLLP) || +#if defined (RCC_PLLQ_SUPPORT) + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLQ) != RCC_OscInitStruct->PLL.PLLQ) || +#endif /* RCC_PLLQ_SUPPORT */ + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLR) != RCC_OscInitStruct->PLL.PLLR)) + { + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Initialize the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to a @ref RCC_ClkInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * This parameter can be one of the following values: + * @arg FLASH_LATENCY_0 FLASH 0 Latency cycle + * @arg FLASH_LATENCY_1 FLASH 1 Latency cycle + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used by default as system clock source after + * startup from Reset, wake-up from STANDBY mode. After restart from Reset, + * the HSI frequency is set to 8 Mhz, then it reaches its default value 16 MHz. + * + * @note The HSI can be selected as system clock source after + * from STOP modes or in case of failure of the HSE used directly or indirectly + * as system clock (if the Clock Security System CSS is enabled). + * + * @note The LSI can be selected as system clock source after + * in case of failure of the LSE used directly or indirectly + * as system clock (if the Clock Security System LSECSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source is ready. + * + * @note You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the FLASH clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI) + { + /* Check the HSI ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_LSI) + { + /* Check the LSI ready flag */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSE is selected as System Clock Source */ + else + { + /* Check the LSE ready flag */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + return HAL_ERROR; + } + } + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = (HAL_RCC_GetSysClockFreq() >> ((AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) & 0x1FU)); + + /* Configure the source of time base considering new system clocks settings*/ + return HAL_InitTick(uwTickPrio); +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to: + + (+) Output clock to MCO pin. + (+) Retrieve current clock frequencies. + (+) Enable the Clock Security System. + +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on MCO1 pin(PA8) or MC02 pin (PA10)(*). + * @note PA8, PA10(*) should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * For STM32G0xx family this parameter can have only one value: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @arg @ref RCC_MCO2 Clock source to output on MCO2 pin(PA10)(*). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled, no clock on MCO + * @arg @ref RCC_MCO1SOURCE_SYSCLK system clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48(*) + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee + * @arg @ref RCC_MCO1SOURCE_PLLCLK main PLLR clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_Wakeup selected as MCO1 source(*) + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled, no clock on MCO2(*) + * @arg @ref RCC_MCO2SOURCE_SYSCLK system clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_HSI48 HSI48 clock selected as MCO2 source for devices with HSI48(*) + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLCLK main PLLR clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLPCLK PLLP clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLQCLK PLLQ clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_RTCCLK RTC clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_RTC_WKUP RTC_Wakeup selected as MCO2 source(*) + * @param RCC_MCODiv specifies the MCO prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock + * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock + * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock + * @arg @ref RCC_MCO2DIV_1 no division applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_2 division by 2 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_4 division by 4 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_8 division by 8 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_16 division by 16 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_32 division by 32 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_64 division by 64 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_128 division by 128 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_256 division by 256 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_512 division by 512 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_1024 division by 1024 applied to MCO2 clock(*) + * + * (*) Feature not available on all devices of the family + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + + /* Common GPIO init parameters */ + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + + if (RCC_MCOx == RCC_MCO1) + { + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), (RCC_MCOSource | RCC_MCODiv)); + } +#if defined(RCC_MCO2_SUPPORT) + else if (RCC_MCOx == RCC_MCO2) + { + assert_param(IS_RCC_MCO2DIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + /* MCO2 Clock Enable */ + MCO2_CLK_ENABLE(); + /* Configure the MCO2 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO2_PIN; + GPIO_InitStruct.Alternate = GPIO_AF3_MCO2; + HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE), (RCC_MCOSource | RCC_MCODiv)); + } +#endif /* RCC_MCO2_SUPPORT */ +} + +/** + * @brief Return the SYSCLK frequency. + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE/HSIDIV(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**), + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note If SYSCLK source is LSI, function returns values based on LSI_VALUE(***) + * @note If SYSCLK source is LSE, function returns values based on LSE_VALUE(****) + * @note (*) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note (***) LSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 32768 Hz). + * @note (****) LSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 32000 Hz). + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllvco, pllsource, pllr, pllm, hsidiv; + uint32_t sysclockfreq; + + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + { + /* HSISYS can be derived for HSI16 */ + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + + /* HSI used as system clock source */ + sysclockfreq = (HSI_VALUE / hsidiv); + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + { + /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + /* PLL used as system clock source */ + + /* PLL_VCO = ((HSE_VALUE or HSI_VALUE)/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + + switch (pllsource) + { + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + break; + + case RCC_PLLSOURCE_HSI: /* HSI16 used as PLL clock source */ + default: /* HSI16 used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) ; + break; + } + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U); + sysclockfreq = pllvco / pllr; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSE) + { + /* LSE used as system clock source */ + sysclockfreq = LSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSI) + { + /* LSI used as system clock source */ + sysclockfreq = LSI_VALUE; + } + else + { + sysclockfreq = 0U; + } + + return sysclockfreq; +} + +/** + * @brief Return the HCLK frequency. + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Return the PCLK1 frequency. + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return ((uint32_t)(__LL_RCC_CALC_PCLK1_FREQ(HAL_RCC_GetHCLKFreq(), LL_RCC_GetAPB1Prescaler()))); +} + +/** + * @brief Configure the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; +#else + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the HSE configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = ((RCC->ICSCR & RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); + RCC_OscInitStruct->HSIDiv = ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos); + + /* Get the LSE configuration -----------------------------------------------*/ + if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + +#if defined(RCC_HSI48_SUPPORT) + /* Get the HSI48 configuration ---------------------------------------------*/ + if (READ_BIT(RCC->CR, RCC_CR_HSI48ON) == RCC_CR_HSI48ON) + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; + } + else + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; + } +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the PLL configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (RCC->PLLCFGR & RCC_PLLCFGR_PLLM); + RCC_OscInitStruct->PLL.PLLN = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + RCC_OscInitStruct->PLL.PLLP = (RCC->PLLCFGR & RCC_PLLCFGR_PLLP); +#if defined(RCC_PLLQ_SUPPORT) + RCC_OscInitStruct->PLL.PLLQ = (RCC->PLLCFGR & RCC_PLLCFGR_PLLQ); +#endif /* RCC_PLLQ_SUPPORT */ + RCC_OscInitStruct->PLL.PLLR = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR); +} + +/** + * @brief Configure the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct Pointer to a @ref RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != (void *)NULL); + assert_param(pFLatency != (void *)NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE); + + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief Enable the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The Clock Security System can only be cleared by reset. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Enable the LSE Clock Security System. + * @note If a failure is detected on the LSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The LSE Clock Security System Detection bit (LSECSSD in BDCR) can only be + * cleared by a backup domain reset. + * @retval None + */ +void HAL_RCC_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Disable the LSE Clock Security System. + * @note After LSE failure detection, the software must disable LSECSSON + * @note The Clock Security System can only be cleared by reset otherwise. + * @retval None + */ +void HAL_RCC_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Handle the RCC Clock Security System interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + uint32_t itflag = RCC->CIFR; + + /* Clear interrupt flags related to CSS */ + RCC->CICR = (itflag & (RCC_CIFR_CSSF | RCC_CIFR_LSECSSF)); + + /* Check RCC CSSF interrupt flag */ + if ((itflag & RCC_CIFR_CSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + } + + /* Check RCC LSECSSF interrupt flag */ + if ((itflag & RCC_CIFR_LSECSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_LSECSSCallback(); + } +} + +/** + * @brief Handle the RCC HSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCC_CSSCallback should be implemented in the user file + */ +} + +/** + * @brief RCC LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_LSECSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_LSECSSCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c new file mode 100644 index 0000000..5a734da --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c @@ -0,0 +1,1682 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extended peripheral: + * + Extended Peripheral Control functions + * + Extended Clock management functions + * + Extended Clock Recovery System Control functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +#define PLL_TIMEOUT_VALUE 100U /* 100 ms (minimum Tick + 1) */ + +#define LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO_GPIO_PORT GPIOA +#define LSCO_PIN GPIO_PIN_2 +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initialize the RCC extended peripherals clocks according to the specified + * parameters in the @ref RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to a @ref RCC_PeriphCLKInitTypeDef structure that + * contains a field PeriphClockSelection which can be a combination of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART2 LPUART2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_FDCAN FDCAN peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (1) + * + * @note (1) Peripherals are not available on all devices + * @note (2) Peripherals clock selection is not available on all devices + * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source: in this case the access to Backup domain is enabled. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpregister; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*-------------------------- RTC clock source configuration ----------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + FlagStatus pwrclkchanged = RESET; + + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if (ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ + tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); + + /* Reset the Backup domain only if the RTC Clock source selection is modified */ + if ((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpregister; + } + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + /* Apply new RTC clock source selection */ + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*-------------------------- USART1 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + +#if defined(RCC_CCIPR_USART2SEL) + /*-------------------------- USART2 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + /*-------------------------- USART3 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) + /*-------------------------- LPUART1 clock source configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); + + /* Configure the LPUART1 clock source */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } +#endif /* LPUART1 */ + +#if defined(LPUART2) + /*-------------------------- LPUART2 clock source configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART2CLKSOURCE(PeriphClkInit->Lpuart2ClockSelection)); + + /* Configure the LPUART clock source */ + __HAL_RCC_LPUART2_CONFIG(PeriphClkInit->Lpuart2ClockSelection); + } +#endif /* LPUART2 */ + +#if defined(RCC_CCIPR_LPTIM1SEL) + /*-------------------------- LPTIM1 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) + { + assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) + /*-------------------------- LPTIM2 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) + { + assert_param(IS_RCC_LPTIM2CLKSOURCE(PeriphClkInit->Lptim2ClockSelection)); + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } +#endif /* RCC_CCIPR_LPTIM2SEL */ + + /*-------------------------- I2C1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(RCC_CCIPR_I2C2SEL) + /*-------------------------- I2C2 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); + + /* Configure the I2C2 clock source */ + __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); + } +#endif /* (RCC_CCIPR_I2C2SEL */ + +#if defined(RNG) + /*-------------------------- RNG clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) + { + assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + + if (PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RNG */ + /*-------------------------- ADC clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC interface clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + + if (PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLADC) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } + +#if defined(CEC) + /*-------------------------- CEC clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } +#endif /* CEC */ + +#if defined(RCC_CCIPR_TIM1SEL) + /*-------------------------- TIM1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM1CLKSOURCE(PeriphClkInit->Tim1ClockSelection)); + + /* Configure the TIM1 clock source */ + __HAL_RCC_TIM1_CONFIG(PeriphClkInit->Tim1ClockSelection); + + if (PeriphClkInit->Tim1ClockSelection == RCC_TIM1CLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) + /*-------------------------- TIM15 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection)); + + /* Configure the TIM15 clock source */ + __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection); + + if (PeriphClkInit->Tim15ClockSelection == RCC_TIM15CLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RCC_CCIPR_TIM15SEL */ + + /*-------------------------- I2S1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S1CLKSOURCE(PeriphClkInit->I2s1ClockSelection)); + + /* Configure the I2S1 clock source */ + __HAL_RCC_I2S1_CONFIG(PeriphClkInit->I2s1ClockSelection); + + if (PeriphClkInit->I2s1ClockSelection == RCC_I2S1CLKSOURCE_PLL) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } + +#if defined(RCC_CCIPR2_I2S2SEL) + /*-------------------------- I2S2 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection)); + + /* Configure the I2S2 clock source */ + __HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection); + + if (PeriphClkInit->I2s2ClockSelection == RCC_I2S2CLKSOURCE_PLL) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + /*-------------------------- USB clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + + if (PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(FDCAN1) || defined(FDCAN2) + /*-------------------------- FDCAN clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) + { + /* Check the parameters */ + assert_param(IS_RCC_FDCANCLKSOURCE(PeriphClkInit->FdcanClockSelection)); + + /* Configure the FDCAN clock source */ + __HAL_RCC_FDCAN_CONFIG(PeriphClkInit->FdcanClockSelection); + + if (PeriphClkInit->FdcanClockSelection == RCC_FDCANCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* FDCAN1 || FDCAN2 */ + + return status; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals + * clocks: I2C1, I2S1, USART1, RTC, ADC, + * LPTIM1 (1), LPTIM2 (1), TIM1 (2), TIM15 (1)(2), USART2 (2), LPUART1 (1), CEC (1) and RNG (1) + * @note (1) Peripheral is not available on all devices + * @note (2) Peripheral clock selection is not available on all devices + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2S1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC ; + +#if defined(RCC_CCIPR_LPTIM1SEL) && defined(RCC_CCIPR_LPTIM2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_LPTIM1; +#endif /* RCC_CCIPR_LPTIM1SEL && RCC_CCIPR_LPTIM2SEL */ +#if defined(RCC_CCIPR_RNGSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_RNG; +#endif /* RCC_CCIPR_RNGSEL */ +#if defined(RCC_CCIPR_LPUART1SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPUART1; +#endif /* RCC_CCIPR_LPUART1SEL */ +#if defined(RCC_CCIPR_LPUART2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPUART2; +#endif /* RCC_CCIPR_LPUART2SEL */ +#if defined(RCC_CCIPR_CECSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC; +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR_TIM1SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM1; +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM15; +#endif /* RCC_CCIPR_TIM15SEL */ +#if defined(RCC_CCIPR_USART2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART2; +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART3; +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(RCC_CCIPR_I2C2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C2; +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR2_I2S2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; +#endif /* RCC_CCIPR2_I2S2SEL */ +#if defined(RCC_CCIPR2_USBSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(RCC_CCIPR2_FDCANSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_FDCAN; +#endif /* RCC_CCIPR_FDCANSEL */ + /* Get the USART1 clock source ---------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); +#if defined(RCC_CCIPR_USART2SEL) + /* Get the USART2 clock source ---------------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + /* Get the USART3 clock source ---------------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(RCC_CCIPR_LPUART1SEL) + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); +#endif /* RCC_CCIPR_LPUART1SEL */ +#if defined(RCC_CCIPR_LPUART2SEL) + /* Get the LPUART2 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart2ClockSelection = __HAL_RCC_GET_LPUART2_SOURCE(); +#endif /* RCC_CCIPR_LPUART2SEL */ + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#if defined(RCC_CCIPR_I2C2SEL) + /* Get the I2C2 clock source -----------------------------------------------*/ + PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); +#endif /* RCC_CCIPR_LPTIM2SEL */ +#if defined(RCC_CCIPR_TIM1SEL) + /* Get the TIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Tim1ClockSelection = __HAL_RCC_GET_TIM1_SOURCE(); +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + /* Get the TIM15 clock source ---------------------------------------------*/ + PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE(); +#endif /* RCC_CCIPR_TIM15SEL */ + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); +#if defined(RCC_CCIPR_RNGSEL) + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); +#endif /* RCC_CCIPR_RNGSEL */ + /* Get the ADC clock source -----------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); +#if defined(RCC_CCIPR_CECSEL) + /* Get the CEC clock source -----------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR2_USBSEL) + /* Get the USB clock source -----------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(RCC_CCIPR2_FDCANSEL) + /* Get the FDCAN clock source -----------------------------------------------*/ + PeriphClkInit->FdcanClockSelection = __HAL_RCC_GET_FDCAN_SOURCE(); +#endif /* RCC_CCIPR2_FDCANSEL */ + /* Get the I2S1 clock source -----------------------------------------------*/ + PeriphClkInit->I2s1ClockSelection = __HAL_RCC_GET_I2S1_SOURCE(); +#if defined(RCC_CCIPR2_I2S2SEL) + /* Get the I2S2 clock source -----------------------------------------------*/ + PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE(); +#endif /* RCC_CCIPR2_I2S2SEL */ +} + +/** + * @brief Return the peripheral clock frequency for peripherals with clock source from PLL + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock(1) + * @arg @ref RCC_PERIPHCLK_LPUART2 LPUART2 peripheral clock(1) + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_FDCAN FDCAN peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (1) + * @note (1) Peripheral not available on all devices + * @note (2) Peripheral Clock configuration not available on all devices + * @retval Frequency in Hz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency = 0U; + uint32_t srcclk; + uint32_t pllvco; + uint32_t plln; +#if defined(RCC_CCIPR_RNGSEL) + uint32_t rngclk; + uint32_t rngdiv; +#endif /* RCC_CCIPR_RNGSEL */ + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + if (PeriphClk == RCC_PERIPHCLK_RTC) + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + /* Check if LSE is ready and if RTC clock selection is LSE */ + if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_RTCCLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready and if RTC clock selection is LSI */ + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_RTCCLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/ + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_RTCCLKSOURCE_HSE_DIV32)) + { + frequency = HSE_VALUE / 32U; + } + /* Clock not enabled for RTC*/ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + } + else + { + /* Other external peripheral clock source than RTC */ + + /* Compute PLL clock input */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI) /* HSI ? */ + { + pllvco = HSI_VALUE; + } + else if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) /* HSE ? */ + { + pllvco = HSE_VALUE; + } + else /* No source */ + { + pllvco = 0U; + } + + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + + switch (PeriphClk) + { +#if defined(RCC_CCIPR_RNGSEL) + case RCC_PERIPHCLK_RNG: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGSEL); + if (srcclk == RCC_RNGCLKSOURCE_HSI_DIV8) /* HSI_DIV8 ? */ + { + rngclk = HSI_VALUE / 8U; + } + else if (srcclk == RCC_RNGCLKSOURCE_PLL) /* PLL ? */ + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + rngclk = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + else if (srcclk == RCC_RNGCLKSOURCE_SYSCLK) /* SYSCLK ? */ + { + rngclk = HAL_RCC_GetSysClockFreq(); + } + else /* No clock source */ + { + rngclk = 0U; + } + + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + frequency = (rngclk / rngdiv); + + break; +#endif /* RCC_CCIPR_RNGSEL */ + case RCC_PERIPHCLK_USART1: + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + if (srcclk == RCC_USART1CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK) /* SYSCLK ? */ + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#if defined(RCC_CCIPR_USART2SEL) + case RCC_PERIPHCLK_USART2: + /* Get the current USART2 source */ + srcclk = __HAL_RCC_GET_USART2_SOURCE(); + + if (srcclk == RCC_USART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + case RCC_PERIPHCLK_USART3: + /* Get the current USART3 source */ + srcclk = __HAL_RCC_GET_USART3_SOURCE(); + + if (srcclk == RCC_USART3CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART3CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART3CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART3 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(RCC_CCIPR_CECSEL) + case RCC_PERIPHCLK_CEC: + /* Get the current CEC source */ + srcclk = __HAL_RCC_GET_CEC_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_CECCLKSOURCE_HSI_DIV488)) + { + frequency = (HSI_VALUE / 488U); + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_CECCLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for CEC */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_CECSEL */ + +#if defined(RCC_CCIPR_LPUART1SEL) + case RCC_PERIPHCLK_LPUART1: + /* Get the current LPUART1 source */ + srcclk = __HAL_RCC_GET_LPUART1_SOURCE(); + + if (srcclk == RCC_LPUART1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_LPUART1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPUART1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPUART1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPUART1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPUART1SEL */ + +#if defined(RCC_CCIPR_LPUART2SEL) + case RCC_PERIPHCLK_LPUART2: + /* Get the current LPUART2 source */ + srcclk = __HAL_RCC_GET_LPUART2_SOURCE(); + + if (srcclk == RCC_LPUART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_LPUART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPUART2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPUART2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPUART2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPUART2SEL */ + + case RCC_PERIPHCLK_ADC: + + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + if (srcclk == RCC_ADCCLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if (srcclk == RCC_ADCCLKSOURCE_HSI) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_ADCCLKSOURCE_PLLADC) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + /* Clock not enabled for ADC */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + + case RCC_PERIPHCLK_I2C1: + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + if (srcclk == RCC_I2C1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2C1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + /* Clock not enabled for I2C1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + +#if defined(RCC_CCIPR_I2C2SEL) + case RCC_PERIPHCLK_I2C2: + /* Get the current I2C2 source */ + srcclk = __HAL_RCC_GET_I2C2_SOURCE(); + + if (srcclk == RCC_I2C2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_I2C2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2C2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + /* Clock not enabled for I2C2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_I2C2SEL */ + + case RCC_PERIPHCLK_I2S1: + /* Get the current I2S1 source */ + srcclk = __HAL_RCC_GET_I2S1_SOURCE(); + + if (srcclk == RCC_I2S1CLKSOURCE_PLL) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + else if (srcclk == RCC_I2S1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2S1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_I2S1CLKSOURCE_EXT) + { + /* External clock used.*/ + frequency = EXTERNAL_I2S1_CLOCK_VALUE; + } + /* Clock not enabled for I2S1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + +#if defined(RCC_CCIPR2_I2S2SEL) + case RCC_PERIPHCLK_I2S2: + /* Get the current I2S2 source */ + srcclk = __HAL_RCC_GET_I2S2_SOURCE(); + + if (srcclk == RCC_I2S2CLKSOURCE_PLL) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + else if (srcclk == RCC_I2S2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2S2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_I2S2CLKSOURCE_EXT) + { + /* External clock used.*/ + frequency = EXTERNAL_I2S2_CLOCK_VALUE; + } + /* Clock not enabled for I2S2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) + case RCC_PERIPHCLK_LPTIM1: + /* Get the current LPTIM1 source */ + srcclk = __HAL_RCC_GET_LPTIM1_SOURCE(); + + if (srcclk == RCC_LPTIM1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPTIM1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) + case RCC_PERIPHCLK_LPTIM2: + /* Get the current LPTIM2 source */ + srcclk = __HAL_RCC_GET_LPTIM2_SOURCE(); + + if (srcclk == RCC_LPTIM2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPTIM2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(RCC_CCIPR_TIM1SEL) + case RCC_PERIPHCLK_TIM1: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM1SEL); + + if (srcclk == RCC_TIM1CLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_TIM1CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) + case RCC_PERIPHCLK_TIM15: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM15SEL); + + if (srcclk == RCC_TIM15CLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_TIM15CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(RCC_CCIPR2_USBSEL) + case RCC_PERIPHCLK_USB: + + srcclk = READ_BIT(RCC->CCIPR2, RCC_CCIPR2_USBSEL); + + if (srcclk == RCC_USBCLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } +#if defined(RCC_HSI48_SUPPORT) + else if (srcclk == RCC_USBCLKSOURCE_HSI48) /* HSI48 ? */ + { + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSI48RDY)) && (srcclk == RCC_USBCLKSOURCE_HSI48)) + { + frequency = HSI48_VALUE; + } + } +#endif /* RCC_HSI48_SUPPORT */ + else if (srcclk == RCC_USBCLKSOURCE_HSE) + { + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_USBCLKSOURCE_HSE)) + { + frequency = HSE_VALUE; + } + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_USBSEL */ + +#if defined(RCC_CCIPR2_FDCANSEL) + case RCC_PERIPHCLK_FDCAN: + + srcclk = READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL); + + if (srcclk == RCC_FDCANCLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_FDCANCLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_FDCANCLKSOURCE_HSE)) + { + frequency = HSE_VALUE; + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_FDCANSEL */ + + default: + break; + } + } + + return (frequency); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation of LSE CSS, Low speed clock output and + clock after wake-up from STOP mode. +@endverbatim + * @{ + */ + +/** + * @brief Select the Low Speed clock source to output on LSCO pin (PA2). + * @param LSCOSource specifies the Low Speed clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + */ +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); + + /* LSCO Pin Clock Enable */ + LSCO_CLK_ENABLE(); + + /* Configure the LSCO pin in analog mode */ + GPIO_InitStruct.Pin = LSCO_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); + + /* Update LSCOSEL clock source in Backup Domain control register */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, LSCOSource | RCC_BDCR_LSCOEN); + + if (backupchanged == SET) + { + HAL_PWR_DisableBkUpAccess(); + } + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @brief Disable the Low Speed clock output. + * @retval None + */ +void HAL_RCCEx_DisableLSCO(void) +{ + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Update LSCOEN bit in Backup Domain control register */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable access to the backup domain */ + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); + + /* Restore previous configuration */ + if (backupchanged == SET) + { + /* Disable access to the backup domain */ + HAL_PWR_DisableBkUpAccess(); + } + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and sychronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; /* no init needed */ + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[6:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Wait for CRS Synchronization status. + * @param Timeout Duration of the timeout + * @note Timeout is based on the maximum time to receive a SYNC event based on synchronization + * frequency. + * @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. + * @retval Combination of Synchronization status + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_TIMEOUT + * @arg @ref RCC_CRS_SYNCOK + * @arg @ref RCC_CRS_SYNCWARN + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + */ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } + while (RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if (((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if (((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if (((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if (((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if ((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if ((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if ((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rng.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rng.c new file mode 100644 index 0000000..a20bac6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rng.c @@ -0,0 +1,833 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rng.c + * @author MCD Application Team + * @brief RNG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * + Initialization and configuration functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The RNG HAL driver can be used as follows: + + (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro + in HAL_RNG_MspInit(). + (#) Activate the RNG peripheral using HAL_RNG_Init() function. + (#) Wait until the 32 bit Random Number Generator contains a valid + random data using (polling/interrupt) mode. + (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_RNG_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_RNG_RegisterCallback() to register a user callback. + Function @ref HAL_RNG_RegisterCallback() allows to register following callbacks: + (+) ErrorCallback : RNG Error Callback. + (+) MspInitCallback : RNG MspInit. + (+) MspDeInitCallback : RNG MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_RNG_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_RNG_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ErrorCallback : RNG Error Callback. + (+) MspInitCallback : RNG MspInit. + (+) MspDeInitCallback : RNG MspDeInit. + + [..] + For specific callback ReadyDataCallback, use dedicated register callbacks: + respectively @ref HAL_RNG_RegisterReadyDataCallback() , @ref HAL_RNG_UnRegisterReadyDataCallback(). + + [..] + By default, after the @ref HAL_RNG_Init() and when the state is HAL_RNG_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + example @ref HAL_RNG_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_RNG_Init() + and @ref HAL_RNG_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_RNG_Init() and @ref HAL_RNG_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_RNG_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RNG_STATE_READY or HAL_RNG_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_RNG_RegisterCallback() before calling @ref HAL_RNG_DeInit() + or @ref HAL_RNG_Init() function. + + [..] + When The compilation define USE_HAL_RNG_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @addtogroup RNG + * @brief RNG HAL module driver. + * @{ + */ + +#ifdef HAL_RNG_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RNG_Private_Constants RNG Private Constants + * @{ + */ +#define RNG_TIMEOUT_VALUE 2U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RNG_Exported_Functions + * @{ + */ + +/** @addtogroup RNG_Exported_Functions_Group1 + * @brief Initialization and configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the RNG according to the specified parameters + in the RNG_InitTypeDef and create the associated handle + (+) DeInitialize the RNG peripheral + (+) Initialize the RNG MSP + (+) DeInitialize RNG MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RNG peripheral and creates the associated handle. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); + assert_param(IS_RNG_CED(hrng->Init.ClockErrorDetection)); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + if (hrng->State == HAL_RNG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrng->Lock = HAL_UNLOCKED; + + hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ + hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hrng->MspInitCallback == NULL) + { + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hrng->MspInitCallback(hrng); + } +#else + if (hrng->State == HAL_RNG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrng->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_RNG_MspInit(hrng); + } +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Clock Error Detection Configuration */ + MODIFY_REG(hrng->Instance->CR, RNG_CR_CED, hrng->Init.ClockErrorDetection); + + /* Enable the RNG Peripheral */ + __HAL_RNG_ENABLE(hrng); + + /* Initialize the RNG state */ + hrng->State = HAL_RNG_STATE_READY; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the RNG peripheral. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + + /* Clear Clock Error Detection bit */ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_CED); + /* Disable the RNG Peripheral */ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN); + + /* Clear RNG interrupt status flags */ + CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + if (hrng->MspDeInitCallback == NULL) + { + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hrng->MspDeInitCallback(hrng); +#else + /* DeInit the low level hardware */ + HAL_RNG_MspDeInit(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Update the RNG state */ + hrng->State = HAL_RNG_STATE_RESET; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hrng); + + /* Return the function status */ + return HAL_OK; +} + +/** + * @brief Initializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RNG Callback + * To be used instead of the weak predefined callback + * @param hrng RNG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_ERROR_CB_ID : + hrng->ErrorCallback = pCallback; + break; + + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = pCallback; + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RNG_STATE_RESET == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = pCallback; + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +/** + * @brief Unregister an RNG Callback + * RNG callabck is redirected to the weak predefined callback + * @param hrng RNG handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_ERROR_CB_ID : + hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RNG_STATE_RESET == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */ + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +/** + * @brief Register Data Ready RNG Callback + * To be used instead of the weak HAL_RNG_ReadyDataCallback() predefined callback + * @param hrng RNG handle + * @param pCallback pointer to the Data Ready Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + hrng->ReadyDataCallback = pCallback; + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +/** + * @brief UnRegister the Data Ready RNG Callback + * Data Ready RNG Callback is redirected to the weak HAL_RNG_ReadyDataCallback() predefined callback + * @param hrng RNG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup RNG_Exported_Functions_Group2 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Get the 32 bit Random number + (+) Get the 32 bit Random number with interrupt enabled + (+) Handle RNG interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Generates a 32-bit random number. + * @note This function checks value of RNG_FLAG_DRDY flag to know if valid + * random number is available in the DR register (RNG_FLAG_DRDY flag set + * whenever a random number is available through the RNG_DR register). + * After transitioning from 0 to 1 (random number available), + * RNG_FLAG_DRDY flag remains high until output buffer becomes empty after reading + * four words from the RNG_DR register, i.e. further function calls + * will immediately return a new u32 random number (additional words are + * available and can be read by the application, till RNG_FLAG_DRDY flag remains high). + * @note When no more random number data is available in DR register, RNG_FLAG_DRDY + * flag is automatically cleared. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param random32bit pointer to generated random number variable if successful. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if data register contains valid random data */ + while (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + return HAL_ERROR; + } + } + + /* Get a 32bit Random number */ + hrng->RandomNumber = hrng->Instance->DR; + *random32bit = hrng->RandomNumber; + + hrng->State = HAL_RNG_STATE_READY; + } + else + { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + return status; +} + +/** + * @brief Generates a 32-bit random number in interrupt mode. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ + __HAL_RNG_ENABLE_IT(hrng); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Handles RNG interrupt request. + * @note In the case of a clock error, the RNG is no more able to generate + * random numbers because the PLL48CLK clock is not correct. User has + * to check that the clock controller is correctly configured to provide + * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT(). + * The clock error has no impact on the previously generated + * random numbers, and the RNG_DR register contents can be used. + * @note In the case of a seed error, the generation of random numbers is + * interrupted as long as the SECS bit is '1'. If a number is + * available in the RNG_DR register, it must not be used because it may + * not have enough entropy. In this case, it is recommended to clear the + * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable + * the RNG peripheral to reinitialize and restart the RNG. + * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS + * or CEIS are set. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + + */ +void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng) +{ + uint32_t rngclockerror = 0U; + + /* RNG clock error interrupt occurred */ + if (__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_CLOCK; + rngclockerror = 1U; + } + else if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_SEED; + rngclockerror = 1U; + } + else + { + /* Nothing to do */ + } + + if (rngclockerror == 1U) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_ERROR; + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Error callback */ + hrng->ErrorCallback(hrng); +#else + /* Call legacy weak Error callback */ + HAL_RNG_ErrorCallback(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Clear the clock error flag */ + __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI); + } + + /* Check RNG data ready interrupt occurred */ + if (__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET) + { + /* Generate random number once, so disable the IT */ + __HAL_RNG_DISABLE_IT(hrng); + + /* Get the 32bit Random number (DRDY flag automatically cleared) */ + hrng->RandomNumber = hrng->Instance->DR; + + if (hrng->State != HAL_RNG_STATE_ERROR) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Data Ready callback */ + hrng->ReadyDataCallback(hrng, hrng->RandomNumber); +#else + /* Call legacy weak Data Ready callback */ + HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Read latest generated random number. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval random value + */ +uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng) +{ + return (hrng->RandomNumber); +} + +/** + * @brief Data Ready callback in non-blocking mode. + * @note When RNG_FLAG_DRDY flag value is set, first random number has been read + * from DR register in IRQ Handler and is provided as callback parameter. + * Depending on valid data available in the conditioning output buffer, + * additional words can be read by the application from DR register till + * DRDY bit remains high. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param random32bit generated random number. + * @retval None + */ +__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + UNUSED(random32bit); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_ReadyDataCallback must be implemented in the user file. + */ +} + +/** + * @brief RNG error callbacks. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_ErrorCallback must be implemented in the user file. + */ +} +/** + * @} + */ + + +/** @addtogroup RNG_Exported_Functions_Group3 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the RNG state. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL state + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng) +{ + return hrng->State; +} + +/** + * @brief Return the RNG handle error code. + * @param hrng: pointer to a RNG_HandleTypeDef structure. + * @retval RNG Error Code +*/ +uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng) +{ + /* Return RNG Error Code */ + return hrng->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + + +#endif /* HAL_RNG_MODULE_ENABLED */ +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c new file mode 100644 index 0000000..246c0be --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c @@ -0,0 +1,1849 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc.c + * @author MCD Application Team + * @brief RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) peripheral: + * + Initialization/de-initialization functions + * + Calendar (Time and Date) configuration + * + Alarms (Alarm A and Alarm B) configuration + * + WakeUp Timer configuration + * + TimeStamp configuration + * + Tampers configuration + * + Backup Data Registers configuration + * + RTC Tamper and TimeStamp Pins Selection + * + Interrupts and flags management + * + @verbatim + =============================================================================== + ##### RTC Operating Condition ##### + =============================================================================== + [..] The real-time clock (RTC) and the RTC backup registers can be powered + from the VBAT voltage when the main VDD supply is powered off. + To retain the content of the RTC backup registers and supply the RTC + when VDD is turned off, VBAT pin can be connected to an optional + standby voltage supplied by a battery or by another source. + + ##### Backup Domain Reset ##### + =============================================================================== + [..] The backup domain reset sets all RTC registers and the RCC_BDCR register + to their reset values. + A backup domain reset is generated when one of the following events occurs: + (+) Software reset, triggered by setting the BDRST bit in the + RCC Backup domain control register (RCC_BDCR). + (+) VDD or VBAT power on, if both supplies have previously been powered off. + (+) Tamper detection event resets all data backup registers. + + ##### Backup Domain Access ##### + ============================================================================= + [..] After reset, the backup domain (RTC registers and RTC backup data registers) + is protected against possible unwanted write accesses. + [..] To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() function. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function. + (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function. + + [..] To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Call the function HAL_RCCEx_PeriphCLKConfig with RCC_PERIPHCLK_RTC for + PeriphClockSelection and select RTCClockSelection (LSE, LSI or HSEdiv32) + (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() macro. + + ##### How to use RTC Driver ##### + =================================================================== + [..] + (+) Enable the RTC domain access (see description in the section above). + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** Time and Date configuration *** + =================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() + and HAL_RTC_SetDate() functions. + (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions. + + *** Alarm configuration *** + =========================== + [..] + (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. + You can also configure the RTC Alarm with interrupt mode using the + HAL_RTC_SetAlarm_IT() function. + (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. + + ##### RTC and low power modes ##### + ================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), + RTC wakeup, RTC tamper event detection and RTC time stamp event detection. + These RTC alternate functions can wake up the system from the Stop and + Standby low power modes. + [..] The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm + or the RTC wakeup events. + [..] The RTC provides a programmable time base for waking up from the + Stop or Standby mode at regular intervals. + Wakeup from STOP and STANDBY modes is possible only when the RTC clock source + is LSE or LSI. + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_RTC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_RTC_RegisterCallback() to register an interrupt callback. + + [..] + Function @ref HAL_RTC_RegisterCallback() allows to register following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) AlarmBEventCallback : RTC Alarm B Event callback. + (+) TimeStampEventCallback : RTC TimeStamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) Tamper1EventCallback : RTC Tamper1Event callback. + (+) Tamper2EventCallback : RTC Tamper2Event callback. + (+) Tamper3EventCallback : RTC Tamper3Event callback. (*) + (+) InternalTamper3EventCallback : RTC Internal Tamper 3 Event callback. + (+) InternalTamper4EventCallback : RTC Internal Tamper 4 Event callback. + (+) InternalTamper5EventCallback : RTC Internal Tamper 5 Event callback. + (+) InternalTamper6EventCallback : RTC Internal Tamper 6 Event callback. + (+) MspInitCallback : RTC MspInit. + (+) MspDeInitCallback : RTC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_RTC_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) AlarmBEventCallback : RTC Alarm B Event callback. + (+) TimeStampEventCallback : RTC TimeStamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) Tamper2EventCallback : RTC Tamper 2 Event callback. + (+) Tamper3EventCallback : RTC Tamper 3 Event callback.(*) + (+) InternalTamper3EventCallback : RTC Internal Tamper 3 Event callback. + (+) InternalTamper4EventCallback : RTC Internal Tamper 4 Event callback. + (+) InternalTamper5EventCallback : RTC Internal Tamper 5 Event callback. + (+) InternalTamper6EventCallback : RTC Internal Tamper 6 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + + [..] + By default, after the @ref HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET, + all callbacks are set to the corresponding weak functions : + examples @ref AlarmAEventCallback(), @ref WakeUpTimerEventCallback(). + Exception done for MspInit and MspDeInit callbacks that are reset to the legacy weak function + in the @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() only when these callbacks are null + (not registered beforehand). + If not, MspInit or MspDeInit are not null, @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_RTC_RegisterCallback() before calling @ref HAL_RTC_DeInit() + or @ref HAL_RTC_Init() function. + + [..] + When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + + +/** @addtogroup RTC + * @brief RTC HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTC_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize and configure the + RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable + RTC registers Write protection, enter and exit the RTC initialization mode, + RTC registers synchronization check and reference clock detection enable. + (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. + It is split into 2 programmable prescalers to minimize power consumption. + (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler. + (++) When both prescalers are used, it is recommended to configure the + asynchronous prescaler to a high value to minimize power consumption. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + (#) To configure the RTC Calendar, user application should enter + initialization mode. In this mode, the calendar counter is stopped + and its value can be updated. When the initialization sequence is + complete, the calendar restarts counting after 4 RTCCLK cycles. + (#) To read the calendar through the shadow registers after Calendar + initialization, calendar update or after wakeup from low power modes + the software must first clear the RSF flag. The software must then + wait until it is set again before reading the calendar, which means + that the calendar registers have been correctly copied into the + RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function + implements the above software sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the RTC peripheral + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the RTC peripheral state */ + if(hrtc != NULL) + { + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv)); + assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut)); + assert_param(IS_RTC_OUTPUT_REMAP(hrtc->Init.OutPutRemap)); + assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity)); + assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType)); + assert_param(IS_RTC_OUTPUT_PULLUP(hrtc->Init.OutPutPullUp)); + + if(hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + /* Process TAMP peripheral offset from RTC one */ + hrtc->TampOffset = (TAMP_BASE - RTC_BASE); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; /* Legacy weak AlarmBEventCallback */ + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ +#if defined(TAMP_CR1_TAMP3E) + hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */ +#endif + hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; /*!< Legacy weak InternalTamper3EventCallback */ + hrtc->InternalTamper4EventCallback = HAL_RTCEx_InternalTamper4EventCallback; /*!< Legacy weak InternalTamper4EventCallback */ + hrtc->InternalTamper5EventCallback = HAL_RTCEx_InternalTamper5EventCallback; /*!< Legacy weak InternalTamper5EventCallback */ + hrtc->InternalTamper6EventCallback = HAL_RTCEx_InternalTamper6EventCallback; /*!< Legacy weak InternalTamper6EventCallback */ + + if(hrtc->MspInitCallback == NULL) + { + hrtc->MspInitCallback = HAL_RTC_MspInit; + } + /* Init the low level hardware */ + hrtc->MspInitCallback(hrtc); + + if(hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } +#else + /* Initialize RTC MSP */ + HAL_RTC_MspInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + } + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + /* Clear RTC_CR FMT, OSEL and POL Bits */ + hrtc->Instance->CR &= ~(RTC_CR_FMT | RTC_CR_POL | RTC_CR_OSEL | RTC_CR_TAMPOE); + /* Set RTC_CR register */ + hrtc->Instance->CR |= (hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity); + + /* Configure the RTC PRER */ + hrtc->Instance->PRER = (hrtc->Init.SynchPrediv); + hrtc->Instance->PRER |= (hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + if (status == HAL_OK) + { + hrtc->Instance->CR &= ~(RTC_CR_TAMPALRM_PU |RTC_CR_TAMPALRM_TYPE | RTC_CR_OUT2EN); + hrtc->Instance->CR |= (hrtc->Init.OutPutPullUp | hrtc->Init.OutPutType | hrtc->Init.OutPutRemap); + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + } + + return status; +} + +/** + * @brief DeInitialize the RTC peripheral. + * @note This function does not reset the RTC Backup Data registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + /* Reset TR, DR and CR registers */ + hrtc->Instance->TR = 0x00000000U; + hrtc->Instance->DR = ((uint32_t)(RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + /* Reset All CR bits except CR[2:0] */ + hrtc->Instance->CR &= RTC_CR_WUCKSEL; + + tickstart = HAL_GetTick(); + + /* Wait till WUTWF flag is set and if Time out is reached exit */ + while(((hrtc->Instance->ICSR) & RTC_ICSR_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + + /* Reset all RTC CR register bits */ + hrtc->Instance->CR &= 0x00000000U; + hrtc->Instance->WUTR = RTC_WUTR_WUT; + hrtc->Instance->PRER = ((uint32_t)(RTC_PRER_PREDIV_A | 0x000000FFU)); + hrtc->Instance->ALRMAR = 0x00000000U; + hrtc->Instance->ALRMBR = 0x00000000U; + hrtc->Instance->SHIFTR = 0x00000000U; + hrtc->Instance->CALR = 0x00000000U; + hrtc->Instance->ALRMASSR = 0x00000000U; + hrtc->Instance->ALRMBSSR = 0x00000000U; + + /* Exit initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if(hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hrtc->MspDeInitCallback(hrtc); + +#else + /* De-Initialize RTC MSP */ + HAL_RTC_MspDeInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + + hrtc->State = HAL_RTC_STATE_RESET; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RTC Callback + * To be used instead of the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID (*) + * @arg @ref HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID Internal Tamper 3 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID Internal Tamper 4 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID Internal Tamper 5 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID Internal Tamper 6 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hrtc); + + if(HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = pCallback; + break; + + case HAL_RTC_ALARM_B_EVENT_CB_ID : + hrtc->AlarmBEventCallback = pCallback; + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = pCallback; + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + hrtc->WakeUpTimerEventCallback = pCallback; + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER2_EVENT_CB_ID : + hrtc->Tamper2EventCallback = pCallback; + break; + +#if defined(TAMP_CR1_TAMP3E) + case HAL_RTC_TAMPER3_EVENT_CB_ID : + hrtc->Tamper3EventCallback = pCallback; + break; +#endif + + case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID : + hrtc->InternalTamper3EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID : + hrtc->InternalTamper4EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID : + hrtc->InternalTamper5EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID : + hrtc->InternalTamper6EventCallback = pCallback; + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Unregister an RTC Callback + * RTC callback is redirected to the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID (*) + * @arg @ref HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID Internal Tamper 3 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID Internal Tamper 4 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID Internal Tamper 5 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID Internal Tamper 6 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrtc); + + if(HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + break; + + case HAL_RTC_ALARM_B_EVENT_CB_ID : + hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; /* Legacy weak AlarmBEventCallback */ + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + break; + + case HAL_RTC_TAMPER2_EVENT_CB_ID : + hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ + break; + +#if defined(TAMP_CR1_TAMP3E) + case HAL_RTC_TAMPER3_EVENT_CB_ID : + hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */ + break; +#endif + + case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID : + hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; /* Legacy weak InternalTamper3EventCallback */ + break; + + case HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID : + hrtc->InternalTamper4EventCallback = HAL_RTCEx_InternalTamper4EventCallback; /* Legacy weak InternalTamper4EventCallback */ + break; + + case HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID : + hrtc->InternalTamper5EventCallback = HAL_RTCEx_InternalTamper5EventCallback; /* Legacy weak InternalTamper5EventCallback */ + break; + + case HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID : + hrtc->InternalTamper6EventCallback = HAL_RTCEx_InternalTamper6EventCallback; /* Legacy weak InternalTamper6EventCallback */ + break; + + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Initialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group2 + * @brief RTC Time and Date functions + * +@verbatim + =============================================================================== + ##### RTC Time and Date functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Time and Date features + +@endverbatim + * @{ + */ + +/** + * @brief Set RTC current time. + * @param hrtc RTC handle + * @param sTime Pointer to Time structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving)); + assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sTime->Hours)); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sTime->Hours)); + } + assert_param(IS_RTC_MINUTES(sTime->Minutes)); + assert_param(IS_RTC_SECONDS(sTime->Seconds)); + + tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Seconds) << RTC_TR_SU_Pos) | \ + (((uint32_t)sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours))); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); + tmpreg = (((uint32_t)(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)(sTime->Seconds) << RTC_TR_SU_Pos) | \ + ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + + /* Set the RTC_TR register */ + hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); + + /* Clear the bits to be configured */ + hrtc->Instance->CR &= ((uint32_t)~RTC_CR_BKP); + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current time. + * @note You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds + * value in second fraction ratio with time unit following generic formula: + * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read + * to ensure consistency between the time and date values. + * @param hrtc RTC handle + * @param sTime Pointer to Time structure with Hours, Minutes and Seconds fields returned + * with input format (BIN or BCD), also SubSeconds field returning the + * RTC_SSR register content and SecondFraction field the Synchronous pre-scaler + * factor to be used for second fraction ratio computation. + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get subseconds structure field from the corresponding register*/ + sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR); + + /* Get SecondFraction structure field from the corresponding register field*/ + sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S); + + /* Get the TR register */ + tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TR_HU_Pos); + sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); + sTime->Seconds = (uint8_t)((tmpreg & (RTC_TR_ST | RTC_TR_SU)) >> RTC_TR_SU_Pos); + sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> RTC_TR_PM_Pos); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the time structure parameters to Binary format */ + sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); + sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); + sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); + } + + return HAL_OK; +} + +/** + * @brief Set RTC current date. + * @param hrtc RTC handle + * @param sDate Pointer to date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U)) + { + sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU); + } + + assert_param(IS_RTC_WEEKDAY(sDate->WeekDay)); + + if(Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_YEAR(sDate->Year)); + assert_param(IS_RTC_MONTH(sDate->Month)); + assert_param(IS_RTC_DATE(sDate->Date)); + + datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << RTC_DR_YU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Date) << RTC_DR_DU_Pos) | \ + ((uint32_t)sDate->WeekDay << RTC_DR_WDU_Pos)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); + assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month))); + assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date))); + + datetmpreg = ((((uint32_t)sDate->Year) << RTC_DR_YU_Pos) | \ + (((uint32_t)sDate->Month) << RTC_DR_MU_Pos) | \ + (((uint32_t)sDate->Date) << RTC_DR_DU_Pos)| \ + (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + /* Set the RTC_DR register */ + hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current date. + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read. + * @param hrtc RTC handle + * @param sDate Pointer to Date structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the DR register */ + datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos); + sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos); + sDate->Date = (uint8_t)((datetmpreg & (RTC_DR_DT | RTC_DR_DU)) >> RTC_DR_DU_Pos); + sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> RTC_DR_WDU_Pos); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the date structure parameters to Binary format */ + sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); + sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); + sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); + } + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group3 + * @brief RTC Alarm functions + * +@verbatim + =============================================================================== + ##### RTC Alarm functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Alarm feature + +@endverbatim + * @{ + */ +/** + * @brief Set the specified RTC Alarm. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart; + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + + /* Configure the Alarm A or Alarm B Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if(sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + } + else + { + /* Disable the Alarm B interrupt */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMBR = (uint32_t)tmpreg; + /* Configure the Alarm B Sub Second register */ + hrtc->Instance->ALRMBSSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMB_ENABLE(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set the specified RTC Alarm with Interrupt. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the HAL_RTC_DeactivateAlarm()). + * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart; + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + /* Configure the Alarm A or Alarm B Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if(sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA); + } + else + { + /* Disable the Alarm B interrupt */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* Clear flag alarm B */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_CLEAR_ALRBF); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMBR = (uint32_t)tmpreg; + /* Configure the Alarm B Sub Second register */ + hrtc->Instance->ALRMBSSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMB_ENABLE(hrtc); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB); + } + + /* RTC Alarm Interrupt Configuration: EXTI configuration */ + __HAL_RTC_ALARM_EXTI_ENABLE_IT(); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the specified RTC Alarm. + * @param hrtc RTC handle + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + if(Alarm == RTC_ALARM_A) + { + /* AlarmA */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if( (HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + else + { + /* AlarmB */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB); + + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC Alarm value and masks. + * @param hrtc RTC handle + * @param sAlarm Pointer to Date structure + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) +{ + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(Alarm)); + + if(Alarm == RTC_ALARM_A) + { + /* AlarmA */ + sAlarm->Alarm = RTC_ALARM_A; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMAR); + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> RTC_ALRMAR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t)((tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)) >> RTC_ALRMAR_SU_Pos); + sAlarm->AlarmTime.TimeFormat = (uint8_t)((tmpreg & RTC_ALRMAR_PM) >> RTC_ALRMAR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> RTC_ALRMAR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + } + else + { + sAlarm->Alarm = RTC_ALARM_B; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMBR); + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t)((tmpreg & (RTC_ALRMBR_HT | RTC_ALRMBR_HU)) >> RTC_ALRMBR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t)((tmpreg & (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU)) >> RTC_ALRMBR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t)((tmpreg & (RTC_ALRMBR_ST | RTC_ALRMBR_SU)) >> RTC_ALRMBR_SU_Pos); + sAlarm->AlarmTime.TimeFormat = (uint8_t)((tmpreg & RTC_ALRMBR_PM) >> RTC_ALRMBR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t)((tmpreg & (RTC_ALRMBR_DT | RTC_ALRMBR_DU)) >> RTC_ALRMBR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMBR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + } + + if(Format == RTC_FORMAT_BIN) + { + sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); + sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); + sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + } + + return HAL_OK; +} + +/** + * @brief Handle Alarm interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc) +{ + /* Get the AlarmA interrupt source enable status */ + if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != 0U) + { + /* Get the pending status of the AlarmA Interrupt */ + if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != 0U) + { + /* Clear the AlarmA interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Compare Match registered Callback */ + hrtc->AlarmAEventCallback(hrtc); +#else + /* AlarmA callback */ + HAL_RTC_AlarmAEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + } + + /* Get the AlarmB interrupt source enable status */ + if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRB) != 0U) + { + /* Get the pending status of the AlarmB Interrupt */ + if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) != 0U) + { + /* Clear the AlarmB interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_CLEAR_ALRBF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Compare Match registered Callback */ + hrtc->AlarmBEventCallback(hrtc); +#else + /* AlarmB callback */ + HAL_RTCEx_AlarmBEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Alarm A callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_AlarmAEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle AlarmA Polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group4 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Wait for RTC Time and Date Synchronization + +@endverbatim + * @{ + */ + +/** + * @brief Wait until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc) +{ + uint32_t tickstart; + + /* Clear RSF flag */ + hrtc->Instance->ICSR &= (uint32_t)RTC_RSF_MASK; + + tickstart = HAL_GetTick(); + + /* Wait the registers to be synchronised */ + while((hrtc->Instance->ICSR & RTC_ICSR_RSF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group5 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Get RTC state + +@endverbatim + * @{ + */ +/** + * @brief Return the RTC handle state. + * @param hrtc RTC handle + * @retval HAL state + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc) +{ + /* Return RTC handle state */ + return hrtc->State; +} + +/** + * @} + */ +/** + * @} + */ + +/** @addtogroup RTC_Private_Functions + * @{ + */ +/** + * @brief Enter the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Check if the Initialization mode is set */ + if((hrtc->Instance->ICSR & RTC_ICSR_INITF) == 0U) + { + /* Set the Initialization mode */ + SET_BIT(hrtc->Instance->ICSR, RTC_ICSR_INIT); + + tickstart = HAL_GetTick(); + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while(((hrtc->Instance->ICSR & RTC_ICSR_INITF) == 0U) && (status != HAL_TIMEOUT)) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + hrtc->State = HAL_RTC_STATE_TIMEOUT; + } + } + } + + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Exit Initialization mode */ + CLEAR_BIT(RTC->ICSR, RTC_ICSR_INIT); + + /* If CR_BYPSHAD bit = 0, wait for synchro */ + if (READ_BIT(RTC->CR, RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + } + else /* WA 2.7.1 Calendar initialization may fail in case of consecutive INIT mode entry. + Please look at STM32G0 Errata sheet on the internet for details. */ + { + /* Clear BYPSHAD bit */ + CLEAR_BIT(RTC->CR, RTC_CR_BYPSHAD); + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + /* Restore BYPSHAD bit */ + SET_BIT(RTC->CR, RTC_CR_BYPSHAD); + } + + return status; +} +/** + * @brief Convert a 2 digit decimal to BCD format. + * @param Value Byte to be converted + * @retval Converted byte + */ +uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint32_t bcdhigh = 0U; + uint8_t Param = Value; + + while(Param >= 10U) + { + bcdhigh++; + Param -= 10U; + } + + return ((uint8_t)(bcdhigh << 4U) | Param); +} + +/** + * @brief Convert from 2 digit BCD to Binary. + * @param Value BCD value to be converted + * @retval Converted word + */ +uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint32_t tmp; + tmp = (((uint32_t)Value & 0xF0U) >> 4U) * 10U; + return (uint8_t)(tmp + ((uint32_t)Value & 0x0FU)); +} + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c new file mode 100644 index 0000000..2f46d85 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c @@ -0,0 +1,1976 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc_ex.c + * @author MCD Application Team + * @brief Extended RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) Extended peripheral: + * + RTC Time Stamp functions + * + RTC Tamper functions + * + RTC Wake-up functions + * + Extended Control functions + * + Extended RTC features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Enable the RTC domain access. + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** RTC Wakeup configuration *** + ================================ + [..] + (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer() + function. You can also configure the RTC Wakeup timer with interrupt mode + using the HAL_RTCEx_SetWakeUpTimer_IT() function. + (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer() + function. + + *** Outputs configuration *** + ============================= + [..] The RTC has 2 different outputs: + (+) RTC_ALARM: this output is used to manage the RTC Alarm A, Alarm B + and WaKeUp signals. + To output the selected RTC signal, use the HAL_RTC_Init() function. + (+) RTC_CALIB: this output is 512Hz signal or 1Hz. + To enable the RTC_CALIB, use the HAL_RTCEx_SetCalibrationOutPut() function. + (+) Two pins can be used as RTC_ALARM or RTC_CALIB (PC13, PB2) managed on + the RTC_OR register. + (+) When the RTC_CALIB or RTC_ALARM output is selected, the RTC_OUT pin is + automatically configured in output alternate function. + + *** Smooth digital Calibration configuration *** + ================================================ + [..] + (+) Configure the RTC Original Digital Calibration Value and the corresponding + calibration cycle period (32s,16s and 8s) using the HAL_RTCEx_SetSmoothCalib() + function. + + *** TimeStamp configuration *** + =============================== + [..] + (+) Enable the RTC TimeStamp using the HAL_RTCEx_SetTimeStamp() function. + You can also configure the RTC TimeStamp with interrupt mode using the + HAL_RTCEx_SetTimeStamp_IT() function. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + *** Internal TimeStamp configuration *** + =============================== + [..] + (+) Enable the RTC internal TimeStamp using the HAL_RTCEx_SetInternalTimeStamp() function. + User has to check internal timestamp occurrence using __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + *** Tamper configuration *** + ============================ + [..] + (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge + or Level according to the Tamper filter (if equal to 0 Edge else Level) + value, sampling frequency, NoErase, MaskFlag, precharge or discharge and + Pull-UP using the HAL_RTCEx_SetTamper() function. You can configure RTC Tamper + with interrupt mode using HAL_RTCEx_SetTamper_IT() function. + (+) The default configuration of the Tamper erases the backup registers. To avoid + erase, enable the NoErase field on the RTC_TAMPCR register. + (+) With new RTC tamper configuration, you have to call HAL_RTC_Init() in order to + perform TAMP base address offset calculation. + (+) If you do not intend to have tamper using RTC clock, you can bypass its initialization + by setting ClockEnable inti field to RTC_CLOCK_DISABLE. + (+) Enable Internal tamper using HAL_RTCEx_SetInternalTamper. IT mode can be chosen using + setting Interrupt field. + + *** Backup Data Registers configuration *** + =========================================== + [..] + (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() + function. + (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() + function. + (+) Before calling those functions you have to call HAL_RTC_Init() in order to + perform TAMP base address offset calculation. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTCEx + * @brief RTC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTCEx_Exported_Functions + * @{ + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group1 + * @brief RTC TimeStamp and Tamper functions + * +@verbatim + =============================================================================== + ##### RTC TimeStamp and Tamper functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure TimeStamp feature + +@endverbatim + * @{ + */ + +/** + * @brief Set TimeStamp. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg|= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set TimeStamp with Interrupt. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin Specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg |= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable IT timestamp */ + __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS); + + /* RTC timestamp Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT(); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate TimeStamp. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) +{ + uint32_t tmpreg; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS); + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set Internal TimeStamp. + * @note This API must be called before enabling the internal TimeStamp feature. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the internal Time Stamp Enable bits */ + __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate Internal TimeStamp. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the internal Time Stamp Enable bits */ + __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC TimeStamp value. + * @param hrtc RTC handle + * @param sTimeStamp Pointer to Time structure + * @param sTimeStampDate Pointer to Date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format) +{ + uint32_t tmptime, tmpdate; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the TimeStamp time and date registers values */ + tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK); + tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TSTR_HU_Pos); + sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >>RTC_TSTR_MNU_Pos); + sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TR_ST | RTC_TR_SU)) >> RTC_TSTR_SU_Pos); + sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> RTC_TSTR_PM_Pos); + sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR; + + /* Fill the Date structure fields with the read parameters */ + sTimeStampDate->Year = 0U; + sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> RTC_TSDR_MU_Pos); + sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); + sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> RTC_TSDR_WDU_Pos); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the TimeStamp structure parameters to Binary format */ + sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); + sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); + sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); + + /* Convert the DateTimeStamp structure parameters to Binary format */ + sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); + sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); + sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); + } + + /* Clear the TIMESTAMP Flags */ + __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_ITSF); + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + + return HAL_OK; +} + +/** + * @brief TimeStamp callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file + */ +} + + +/** + * @brief Handle TimeStamp interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the TimeStamp interrupt source enable status */ + if (READ_BIT(RTC->MISR, RTC_MISR_TSMF) != 0U) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call TimeStampEvent registered Callback */ + hrtc->TimeStampEventCallback(hrtc); +#else + /* TIMESTAMP callback */ + HAL_RTCEx_TimeStampEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Clearing flags after the Callback because the content of RTC_TSTR and RTC_TSDR are cleared when TSF bit is reset.*/ + WRITE_REG(RTC->SCR, RTC_SCR_CITSF | RTC_SCR_CTSF); + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + + +/** + * @brief Handle TimeStamp polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == 0U) + { + if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != 0U) + { + /* Clear the TIMESTAMP OverRun Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); + + /* Change TIMESTAMP state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group2 + * @brief RTC Wake-up functions + * +@verbatim + =============================================================================== + ##### RTC Wake-up functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Wake-up feature + +@endverbatim + * @{ + */ + +/** + * @brief Set wake up timer. + * @param hrtc RTC handle + * @param WakeUpCounter Wake up counter + * @param WakeUpClock Wake up clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Clear WUTE in RTC_CR to disable the wakeup timer */ + CLEAR_BIT(RTC->CR, RTC_CR_WUTE); + + /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload + counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in + calendar initialization mode. */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + tickstart = HAL_GetTick(); + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set wake up timer with interrupt. + * @param hrtc RTC handle + * @param WakeUpCounter Wake up counter + * @param WakeUpClock Wake up clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable the Wake-Up timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* Clear flag Wake-Up */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload + counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in + calendar initialization mode. */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + tickstart = HAL_GetTick(); + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ + __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); + + /* Configure the Interrupt in the RTC_CR register */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT); + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate wake up timer counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT); + + tickstart = HAL_GetTick(); + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get wake up timer counter. + * @param hrtc RTC handle + * @retval Counter value + */ +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + /* Get the counter value */ + return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT)); +} + +/** + * @brief Handle Wake Up Timer interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the WAKEUPTIMER Interrupt */ + if(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != 0U) + { + /* Clear the WAKEUPTIMER interrupt pending bit */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call WakeUpTimerEvent registered Callback */ + hrtc->WakeUpTimerEventCallback(hrtc); +#else + /* WAKEUPTIMER callback */ + HAL_RTCEx_WakeUpTimerEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Wake Up Timer callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file + */ +} + + +/** + * @brief Handle Wake Up Timer Polling. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the WAKEUPTIMER Flag */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group3 + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Write a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register + (+) Set the Coarse calibration parameters. + (+) Deactivate the Coarse calibration parameters + (+) Set the Smooth calibration parameters. + (+) Configure the Synchronization Shift Control Settings. + (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Enable the RTC reference clock detection. + (+) Disable the RTC reference clock detection. + (+) Enable the Bypass Shadow feature. + (+) Disable the Bypass Shadow feature. + +@endverbatim + * @{ + */ + + + +/** + * @brief Set the Smooth calibration parameters. + * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses + * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field + * SmoothCalibMinusPulsesValue must be equal to 0. + * @param hrtc RTC handle + * @param SmoothCalibPeriod Select the Smooth Calibration Period. + * This parameter can be can be one of the following values : + * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s. + * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s. + * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s. + * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses. + * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. + * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* check if a calibration is pending*/ + if((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U) + { + tickstart = HAL_GetTick(); + + /* check if a calibration is pending*/ + while((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Configure the Smooth calibration settings */ + hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmoothCalibMinusPulsesValue); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configure the Synchronization Shift Control Settings. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @param hrtc RTC handle + * @param ShiftAdd1S Select to add or not 1 second to the time calendar. + * This parameter can be one of the following values: + * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. + * @arg RTC_SHIFTADD1S_RESET: No effect. + * @param ShiftSubFS Select the number of Second Fractions to substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + tickstart = HAL_GetTick(); + + /* Wait until the shift is completed*/ + while((hrtc->Instance->ICSR & RTC_ICSR_SHPF) != 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Check if the reference clock detection is disabled */ + if((hrtc->Instance->CR & RTC_CR_REFCKON) == 0U) + { + /* Configure the Shift settings */ + hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == 0U) + { + if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + } + else + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @param CalibOutput Select the Calibration output Selection . + * This parameter can be one of the following values: + * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. + * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Clear flags before config */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL; + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)CalibOutput; + + __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Enable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + /* Enable clockref detection */ + __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Disable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Disable clockref detection */ + __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Enable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the BYPSHAD bit */ + hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Disable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Reset the BYPSHAD bit */ + hrtc->Instance->CR &= ((uint8_t)~RTC_CR_BYPSHAD); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group4 + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) RTC Alarm B callback + (+) RTC Poll for Alarm B request + +@endverbatim + * @{ + */ + +/** + * @brief Alarm B callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle Alarm B Polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm Flag */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group5 + * @brief Extended RTC Tamper functions + * +@verbatim + ============================================================================== + ##### Tamper functions ##### + ============================================================================== + [..] + (+) Before calling any tamper or internal tamper function, you have to call first + HAL_RTC_Init() function. + (+) In that ine you can select to output tamper event on RTC pin. + [..] + (+) Enable the Tamper and configure the Tamper filter count, trigger Edge + or Level according to the Tamper filter (if equal to 0 Edge else Level) + value, sampling frequency, NoErase, MaskFlag, precharge or discharge and + Pull-UP, timestamp using the HAL_RTCEx_SetTamper() function. + You can configure Tamper with interrupt mode using HAL_RTCEx_SetTamper_IT() function. + (+) The default configuration of the Tamper erases the backup registers. To avoid + erase, enable the NoErase field on the TAMP_TAMPCR register. + [..] + (+) Enable Internal Tamper and configure it with interrupt, timestamp using + the HAL_RTCEx_SetInternalTamper() function. + +@endverbatim + * @{ + */ + + +/** + * @brief Set Tamper + * @param hrtc RTC handle + * @param sTamper Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) +{ + uint32_t tmpreg; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); + + /* Configuration register 2 */ + tmpreg = tamp->CR2; + tmpreg &= ~((sTamper->Tamper << 24) | (sTamper->Tamper << 16) | (sTamper->Tamper)); + + if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE) + { + tmpreg |= (sTamper->Tamper << 24); + } + + if(sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + tmpreg |= (sTamper->Tamper << 16); + } + + if(sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + tmpreg |= sTamper->Tamper; + } + tamp->CR2 = tmpreg; + + /* Filter control register */ + tamp->FLTCR = (sTamper->Filter) | (sTamper->SamplingFrequency) | \ + (sTamper->PrechargeDuration) | (sTamper->TamperPullUp); + + /* timestamp on tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* Control register 1 */ + tamp->CR1 |= (sTamper->Tamper); + + return HAL_OK; +} + + +/** + * @brief Set Tamper in IT mode + * @param hrtc RTC handle + * @param sTamper Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) +{ + uint32_t tmpreg; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); + + /* Configuration register 2 */ + tmpreg = tamp->CR2; + tmpreg &= ~((sTamper->Tamper << 24) | (sTamper->Tamper << 16) | (sTamper->Tamper)); + + if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE) + { + tmpreg |= (sTamper->Tamper << 24); + } + + if(sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + tmpreg |= (sTamper->Tamper << 16); + } + + if(sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + tmpreg |= sTamper->Tamper; + } + tamp->CR2 = tmpreg; + + /* Filter control register */ + tamp->FLTCR = (sTamper->Filter) | (sTamper->SamplingFrequency) | \ + (sTamper->PrechargeDuration) | (sTamper->TamperPullUp); + + /* timestamp on tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* RTC Tamper Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TAMPER_EXTI_ENABLE_IT(); + + /* Interrupt enable register */ + tamp->IER |= sTamper->Tamper; + + /* Control register 1 */ + tamp->CR1 |= (sTamper->Tamper); + + return HAL_OK; +} + + + +/** + * @brief Deactivate Tamper. + * @param hrtc RTC handle + * @param Tamper Selected tamper pin. + * This parameter can be a combination of the following values: + * @arg RTC_TAMPER_1 + * @arg RTC_TAMPER_2 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_TAMPER(Tamper)); + + /* Disable the selected Tamper pin */ + tamp->CR1 &= ~Tamper; + + /* Clear tamper mask/noerase/trigger configuration */ + tamp->CR2 &= ~((Tamper << 24) | (Tamper << 16) | Tamper); + + /* Clear tamper interrupt mode configuration */ + tamp->IER &= ~Tamper; + + return HAL_OK; +} + + +/** + * @brief Tamper event polling. + * @param hrtc RTC handle + * @param Tamper Selected tamper pin. + * This parameter can be a combination of the following values: + * @arg RTC_TAMPER_1 + * @arg RTC_TAMPER_2 + * @arg RTC_TAMPER_3 (*) + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_TAMPER(Tamper)); + + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while((tamp->SR & Tamper) != Tamper) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + tamp->SCR = Tamper; + + return HAL_OK; +} + + +/** + * @brief Set Internal Tamper in interrupt mode + * @param hrtc RTC handle + * @param sIntTamper Pointer to Internal Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); + + /* timestamp on internal tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sIntTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sIntTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* Control register 1 */ + tamp->CR1 |= (sIntTamper->IntTamper); + + return HAL_OK; +} + + +/** + * @brief Set Internal Tamper + * @param hrtc RTC handle + * @param sIntTamper Pointer to Internal Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); + + /* timestamp on internal tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sIntTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sIntTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* RTC Tamper Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TAMPER_EXTI_ENABLE_IT(); + + /* Interrupt enable register */ + tamp->IER |= sIntTamper->IntTamper; + + /* Control register 1 */ + tamp->CR1 |= (sIntTamper->IntTamper); + + return HAL_OK; +} + +/** + * @brief Deactivate Internal Tamper. + * @param hrtc RTC handle + * @param IntTamper Selected internal tamper event. + * This parameter can be any combination of existing internal tampers. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(RTC_HandleTypeDef *hrtc, uint32_t IntTamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); + + /* Disable the selected Tamper pin */ + tamp->CR1 &= ~IntTamper; + + /* Clear internal tamper interrupt mode configuration */ + tamp->IER &= ~IntTamper; + + return HAL_OK; +} + + +/** + * @brief Internal Tamper event polling. + * @param hrtc RTC handle + * @param IntTamper selected tamper. + * This parameter can be any combination of existing internal tampers. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); + + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while((tamp->SR & IntTamper) != IntTamper) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + tamp->SCR = IntTamper; + + return HAL_OK; +} + + +/** + * @brief Handle Tamper interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) +{ + uint32_t tmp; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Get interrupt status */ + tmp = tamp->MISR; + + /* Immediately clear flags */ + tamp->SCR = tmp; + + /* Check Tamper1 status */ + if((tmp & RTC_TAMPER_1) == RTC_TAMPER_1) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 1 Event registered Callback */ + hrtc->Tamper1EventCallback(hrtc); +#else + /* Tamper1 callback */ + HAL_RTCEx_Tamper1EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Tamper2 status */ + if((tmp & RTC_TAMPER_2) == RTC_TAMPER_2) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 2 Event registered Callback */ + hrtc->Tamper2EventCallback(hrtc); +#else + /* Tamper2 callback */ + HAL_RTCEx_Tamper2EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + +#if defined(TAMP_CR1_TAMP3E) + /* Check Tamper3 status */ + if((tmp & RTC_TAMPER_3) == RTC_TAMPER_3) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 3 Event registered Callback */ + hrtc->Tamper3EventCallback(hrtc); +#else + /* Tamper3 callback */ + HAL_RTCEx_Tamper3EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } +#endif + + /* Check Internal Tamper3 status */ + if((tmp & RTC_INT_TAMPER_3) == RTC_INT_TAMPER_3) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 3 Event registered Callback */ + hrtc->InternalTamper3EventCallback(hrtc); +#else + /* Internal Tamper3 callback */ + HAL_RTCEx_InternalTamper3EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper4 status */ + if((tmp & RTC_INT_TAMPER_4) == RTC_INT_TAMPER_4) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 4 Event registered Callback */ + hrtc->InternalTamper4EventCallback(hrtc); +#else + /* Internal Tamper4 callback */ + HAL_RTCEx_InternalTamper4EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper5 status */ + if((tmp & RTC_INT_TAMPER_5) == RTC_INT_TAMPER_5) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 5 Event registered Callback */ + hrtc->InternalTamper5EventCallback(hrtc); +#else + /* Internal Tamper5 callback */ + HAL_RTCEx_InternalTamper5EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper6 status */ + if((tmp & RTC_INT_TAMPER_6) == RTC_INT_TAMPER_6) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 6 Event registered Callback */ + hrtc->InternalTamper6EventCallback(hrtc); +#else + /* Internal Tamper6 callback */ + HAL_RTCEx_InternalTamper6EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + +} + + +/** + * @brief Tamper 1 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Tamper 2 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file + */ +} + +#if defined(TAMP_CR1_TAMP3E) +/** + * @brief Tamper 3 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file + */ +} +#endif + +/** + * @brief Internal Tamper 3 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper3EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Internal Tamper 4 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper4EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Internal Tamper 5 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper5EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Internal Tamper 6 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper6EventCallback could be implemented in the user file + */ +} + + + +/** + * @} + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group6 + * @brief Extended RTC Backup register functions + * +@verbatim + =============================================================================== + ##### Extended RTC Backup register functions ##### + =============================================================================== + [..] + (+) Before calling any tamper or internal tamper function, you have to call first + HAL_RTC_Init() function. + (+) In that ine you can select to output tamper event on RTC pin. + [..] + This subsection provides functions allowing to + (+) Write a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register +@endverbatim + * @{ + */ + + +/** + * @brief Write a data in a specified RTC Backup data register. + * @param hrtc RTC handle + * @param BackupRegister: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 + * specify the register. + * @param Data Data to be written in the specified Backup data register. + * @retval None + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) +{ + uint32_t tmp; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t)&(tamp->BKP0R); + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param hrtc RTC handle + * @param BackupRegister RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 + * specify the register. + * @retval Read value + */ +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) +{ + uint32_t tmp ; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t)&(tamp->BKP0R); + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smartcard.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smartcard.c new file mode 100644 index 0000000..b6ed8b6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smartcard.c @@ -0,0 +1,3158 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_smartcard.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the SMARTCARD peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMARTCARD HAL driver can be used as follows: + + (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard). + (#) Associate a USART to the SMARTCARD handle hsmartcard. + (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT() + and HAL_SMARTCARD_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() + and HAL_SMARTCARD_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly, + the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission + error enabling or disabling in the hsmartcard handle Init structure. + + (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...) + in the hsmartcard handle AdvancedInit structure. + + (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMARTCARD_MspInit() API. + [..] + (@) The specific SMARTCARD interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process. + + [..] + [..] Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** SMARTCARD HAL driver macros list *** + ======================================== + [..] + Below the list of most used macros in SMARTCARD HAL driver. + + (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set + (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag + (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled + + [..] + (@) You can refer to the SMARTCARD HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_SMARTCARD_RegisterCallback() to register a user callback. + Function @ref HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + + [..] + By default, after the @ref HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_SMARTCARD_TxCpltCallback(), @ref HAL_SMARTCARD_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_SMARTCARD_Init() + and @ref HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_SMARTCARD_Init() and @ref HAL_SMARTCARD_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_SMARTCARD_RegisterCallback() before calling @ref HAL_SMARTCARD_DeInit() + or @ref HAL_SMARTCARD_Init() function. + + [..] + When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARD SMARTCARD + * @brief HAL SMARTCARD module driver + * @{ + */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants + * @{ + */ +#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */ + +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8| \ + USART_CR1_FIFOEN )) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | USART_CR2_CPHA | \ + USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT | \ + USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMARTCARD_Private_Functions + * @{ + */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + associated to the SmartCard. + (+) These parameters can be configured: + (++) Baud Rate + (++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity + (++) Receiver/transmitter modes + (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters) + (++) Prescaler value + (++) Guard bit time + (++) NACK enabling or disabling on transmission error + + (+) The following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) Time out enabling (and if activated, timeout value) + (++) Block length + (++) Auto-retry counter + [..] + The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + The USART frame format is given in the following table: + + Table 1. USART frame format. + +---------------------------------------------------------------+ + | M1M0 bits | PCE bit | USART frame | + |-----------------------|---------------------------------------| + | 01 | 1 | | SB | 8 bit data | PB | STB | | + +---------------------------------------------------------------+ + + + * @{ + */ + +/** + * @brief Initialize the SMARTCARD mode according to the specified + * parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmartcard->Lock = HAL_UNLOCKED; + +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + SMARTCARD_InitCallbacksToDefault(hsmartcard); + + if (hsmartcard->MspInitCallback == NULL) + { + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + } + + /* Init the low level hardware */ + hsmartcard->MspInitCallback(hsmartcard); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_SMARTCARD_MspInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + } + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral to set smartcard mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In SmartCard mode, the following bits must be kept cleared: + - LINEN in the USART_CR2 register, + - HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); + + /* set the USART in SMARTCARD mode */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN); + + /* Set the SMARTCARD Communication parameters */ + if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Set the SMARTCARD transmission completion indication */ + SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard); + + if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT) + { + SMARTCARD_AdvFeatureConfig(hsmartcard); + } + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */ + return (SMARTCARD_CheckIdleState(hsmartcard)); +} + +/** + * @brief DeInitialize the SMARTCARD peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + WRITE_REG(hsmartcard->Instance->CR1, 0x0U); + WRITE_REG(hsmartcard->Instance->CR2, 0x0U); + WRITE_REG(hsmartcard->Instance->CR3, 0x0U); + WRITE_REG(hsmartcard->Instance->RTOR, 0x0U); + WRITE_REG(hsmartcard->Instance->GTPR, 0x0U); + + /* DeInit the low level hardware */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + if (hsmartcard->MspDeInitCallback == NULL) + { + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + } + /* DeInit the low level hardware */ + hsmartcard->MspDeInitCallback(hsmartcard); +#else + HAL_SMARTCARD_MspDeInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_RESET; + hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Initialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMARTCARD Callback + * To be used instead of the weak predefined callback + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hsmartcard); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + switch (CallbackID) + { + + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = pCallback; + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmartcard); + + return status; +} + +/** + * @brief Unregister an SMARTCARD callback + * SMARTCARD callback is redirected to the weak predefined callback + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsmartcard); + + if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmartcard); + + return status; +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMARTCARD data transfers. + + [..] + Smartcard is a single wire half duplex communication protocol. + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. The USART should be configured as: + (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register + (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. + + [..] + (+) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non-Blocking mode: The communication is performed using Interrupts + or DMA, the relevant API's return the HAL status. + The end of the data processing will be indicated through the + dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + (++) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication + error is detected. + + (+) Blocking mode APIs are : + (++) HAL_SMARTCARD_Transmit() + (++) HAL_SMARTCARD_Receive() + + (+) Non Blocking mode APIs with Interrupt are : + (++) HAL_SMARTCARD_Transmit_IT() + (++) HAL_SMARTCARD_Receive_IT() + (++) HAL_SMARTCARD_IRQHandler() + + (+) Non Blocking mode functions with DMA are : + (++) HAL_SMARTCARD_Transmit_DMA() + (++) HAL_SMARTCARD_Receive_DMA() + + (+) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_SMARTCARD_TxCpltCallback() + (++) HAL_SMARTCARD_RxCpltCallback() + (++) HAL_SMARTCARD_ErrorCallback() + + [..] + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_SMARTCARD_Abort() + (++) HAL_SMARTCARD_AbortTransmit() + (++) HAL_SMARTCARD_AbortReceive() + (++) HAL_SMARTCARD_Abort_IT() + (++) HAL_SMARTCARD_AbortTransmit_IT() + (++) HAL_SMARTCARD_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (++) HAL_SMARTCARD_AbortCpltCallback() + (++) HAL_SMARTCARD_AbortTransmitCpltCallback() + (++) HAL_SMARTCARD_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint8_t *ptmpdata = pData; + + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + while (hsmartcard->TxXferCount > 0U) + { + hsmartcard->TxXferCount--; + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU); + ptmpdata++; + } + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET, tickstart, + Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint8_t *ptmpdata = pData; + + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Check the remain data to be received */ + while (hsmartcard->RxXferCount > 0U) + { + hsmartcard->RxXferCount--; + + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF); + ptmpdata++; + } + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_TDR register is empty, i.e one interrupt per data to transmit. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * TXFIFO threshold reached. In that case the interrupt rate depends on + * TXFIFO threshold configuration. + * @note This function sets the hsmartcard->TxIsr function pointer according to + * the FIFO mode (data transmission processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + hsmartcard->TxISR = NULL; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Configure Tx interrupt processing */ + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the TX FIFO threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_RDR register can be read, i.e one interrupt per data to receive. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * RXFIFO threshold reached. In that case the interrupt rate depends on + * RXFIFO threshold configuration. + * @note This function sets the hsmartcard->RxIsr function pointer according to + * the FIFO mode (data reception processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Configure Rx interrupt processing */ + if ((hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) && (Size >= hsmartcard->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt; + + /* Set the SMARTCARD error callback */ + hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Enable the SMARTCARD transmit DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR, + Size) == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the UART Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @note The SMARTCARD-associated USART parity is enabled (PCE = 1), + * the received data contain the parity bit (MSB position). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt; + + /* Set the SMARTCARD DMA error callback */ + hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr, + Size) == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t abortcplt = 1U; + + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hsmartcard->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback; + } + else + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hsmartcard->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback; + } + else + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* SMARTCARD Tx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* SMARTCARD Rx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD interrupt requests. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR); + uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1); + uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3); + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U)))) + { + /* SMARTCARD parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE; + } + + /* SMARTCARD frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE; + } + + /* SMARTCARD noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE; + } + + /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U) + || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; + } + + /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; + } + + /* Call SMARTCARD Error Call back function if need be --------------------------*/ + if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = hsmartcard->ErrorCode; + if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + || ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + SMARTCARD_EndRxTransfer(hsmartcard); + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + /* other error type to be considered as blocking : + - Frame error in Transmission + */ + else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + && ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Tx Interrupts, and disable Tx DMA request, if ongoing */ + SMARTCARD_EndTxTransfer(hsmartcard); + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/ + if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U)) + { + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + __HAL_UNLOCK(hsmartcard); +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information + to be available during HAL_SMARTCARD_RxCpltCallback() processing */ + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF); + return; + } + + /* SMARTCARD in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (hsmartcard->TxISR != NULL) + { + hsmartcard->TxISR(hsmartcard); + } + return; + } + + /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/ + if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + SMARTCARD_EndTransmit_IT(hsmartcard); + return; + } + } + + /* SMARTCARD TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + hsmartcard->TxFifoEmptyCallback(hsmartcard); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_SMARTCARDEx_TxFifoEmptyCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } + + /* SMARTCARD RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + hsmartcard->RxFifoFullCallback(hsmartcard); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_SMARTCARDEx_RxFifoFullCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD error callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Receive Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief SMARTCARD State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of SmartCard + handle and also return Peripheral Errors occurred during communication process + (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state + of the SMARTCARD peripheral. + (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMARTCARD handle state. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle state + */ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Return SMARTCARD handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hsmartcard->gState; + temp2 = (uint32_t)hsmartcard->RxState; + + return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the SMARTCARD handle error code. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle Error Code + */ +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard) +{ + return hsmartcard->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions + * @{ + */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hsmartcard SMARTCARD handle. + * @retval none + */ +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Init the SMARTCARD Callback settings */ + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief Configure the SMARTCARD associated USART peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpreg; + SMARTCARD_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate)); + assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength)); + assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits)); + assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity)); + assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode)); + assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity)); + assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase)); + assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit)); + assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling)); + assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable)); + assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable)); + assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount)); + assert_param(IS_SMARTCARD_CLOCKPRESCALER(hsmartcard->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity). + * Oversampling is forced to 16 (OVER8 = 0). + * Configure the Parity and Mode: + * set PS bit according to hsmartcard->Init.Parity value + * set TE and RE bits according to hsmartcard->Init.Mode value */ + tmpreg = (uint32_t) hsmartcard->Init.Parity | hsmartcard->Init.Mode; + tmpreg |= (uint32_t) hsmartcard->Init.WordLength | hsmartcard->FifoMode; + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = hsmartcard->Init.StopBits; + /* Synchronous mode is activated by default */ + tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity; + tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit; + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable; + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - one-bit sampling method versus three samples' majority rule + * according to hsmartcard->Init.OneBitSampling + * - NACK transmission in case of parity error according + * to hsmartcard->Init.NACKEnable + * - autoretry counter according to hsmartcard->Init.AutoRetryCount */ + + tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable; + tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*--------------------- SMARTCARD clock PRESC Configuration ----------------*/ + /* Configure + * - SMARTCARD Clock Prescaler: set PRESCALER according to hsmartcard->Init.ClockPrescaler value */ + MODIFY_REG(hsmartcard->Instance->PRESC, USART_PRESC_PRESCALER, hsmartcard->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos)); + MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg); + + /*-------------------------- USART RTOR Configuration ----------------------*/ + tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos); + if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE) + { + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue; + } + MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO | USART_RTOR_BLEN), tmpreg); + + /*-------------------------- USART BRR Configuration -----------------------*/ + SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource); + tmpreg = 0U; + switch (clocksource) + { + case SMARTCARD_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_HSI: + tmpreg = (uint16_t)(((HSI_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_LSE: + tmpreg = (uint16_t)(((uint16_t)(LSE_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hsmartcard->Instance->BRR = tmpreg; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + return ret; +} + + +/** + * @brief Configure the SMARTCARD associated USART peripheral advanced features. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst); + } + +} + +/** + * @brief Check the SMARTCARD Idle State. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tickstart; + + /* Initialize the SMARTCARD ErrorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the SMARTCARD states */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD Communication Timeout. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param Flag Specifies the SMARTCARD flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief DMA SMARTCARD transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); +} + +/** + * @brief DMA SMARTCARD receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + /* Stop SMARTCARD DMA Tx request if ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->TxXferCount = 0U; + SMARTCARD_EndTxTransfer(hsmartcard); + } + } + + /* Stop SMARTCARD DMA Rx request if ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->RxXferCount = 0U; + SMARTCARD_EndRxTransfer(hsmartcard); + } + } + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA; +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + hsmartcard->TxXferCount = 0U; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmarx != NULL) + { + if (hsmartcard->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmatx != NULL) + { + if (hsmartcard->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + } +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + for (nb_tx_data = hsmartcard->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else if (READ_BIT(hsmartcard->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Tx process is ended, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Clear TxISR function pointer */ + hsmartcard->TxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hsmartcard->TxCpltCallback(hsmartcard); +#else + /* Call legacy weak Tx complete callback */ + HAL_SMARTCARD_TxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_rx_data; + uint16_t rxdatacount; + + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + for (nb_rx_data = hsmartcard->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = hsmartcard->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < hsmartcard->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smartcard_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smartcard_ex.c new file mode 100644 index 0000000..d1b0be2 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smartcard_ex.c @@ -0,0 +1,494 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_smartcard_ex.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides extended firmware functions to manage the following + * functionalities of the SmartCard. + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================= + ##### SMARTCARD peripheral extended features ##### + ============================================================================= + [..] + The Extended SMARTCARD HAL driver can be used as follows: + + (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(), + then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut, + auto-retry counter,...) in the hsmartcard AdvancedInit structure. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When SMARTCARD operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARDEx SMARTCARDEx + * @brief SMARTCARD Extended HAL module driver + * @{ + */ +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Constants SMARTCARD Extended Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions + * @{ + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the SMARTCARD. + (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly + (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature + (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature + +@endverbatim + * @{ + */ + +/** @brief Update on the fly the SMARTCARD block length in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param BlockLength SMARTCARD block length (8-bit long at most) + * @retval None + */ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength) +{ + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos)); +} + +/** @brief Update on the fly the receiver timeout value in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue) +{ + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue); +} + +/** @brief Enable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** @brief Disable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (++) HAL_SMARTCARDEx_RxFifoFullCallback() + (++) HAL_SMARTCARDEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief SMARTCARD RX Fifo full callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD TX Fifo empty callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group3 Extended Peripheral FIFO Control functions + * @brief SMARTCARD control functions + * +@verbatim + =============================================================================== + ##### Peripheral FIFO Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SMARTCARD + FIFO feature. + (+) HAL_SMARTCARDEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_SMARTCARDEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_SMARTCARDEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_SMARTCARDEx_SetRxFifoThreshold() API sets the RX FIFO threshold +@endverbatim + * @{ + */ + +/** + * @brief Enable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_ENABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_DISABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update TX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update RX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Private_Functions SMARTCARD Extended Private Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param hsmartcard SMARTCARD handle. + * @retval None + */ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_DISABLE) + { + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + hsmartcard->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold]; + hsmartcard->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold]; + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smbus.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smbus.c new file mode 100644 index 0000000..0885a90 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_smbus.c @@ -0,0 +1,2673 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_smbus.c + * @author MCD Application Team + * @brief SMBUS HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the System Management Bus (SMBus) peripheral, + * based on I2C principles of operation : + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMBUS HAL driver can be used as follows: + + (#) Declare a SMBUS_HandleTypeDef handle structure, for example: + SMBUS_HandleTypeDef hsmbus; + + (#)Initialize the SMBUS low level resources by implementing the @ref HAL_SMBUS_MspInit() API: + (##) Enable the SMBUSx interface clock + (##) SMBUS pins configuration + (+++) Enable the clock for the SMBUS GPIOs + (+++) Configure SMBUS pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SMBUSx interrupt priority + (+++) Enable the NVIC SMBUS IRQ Channel + + (#) Configure the Communication Clock Timing, Bus Timeout, Own Address1, Master Addressing mode, + Dual Addressing mode, Own Address2, Own Address2 Mask, General call, Nostretch mode, + Peripheral mode and Packet Error Check mode in the hsmbus Init structure. + + (#) Initialize the SMBUS registers by calling the @ref HAL_SMBUS_Init() API: + (++) These API's configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized @ref HAL_SMBUS_MspInit(&hsmbus) API. + + (#) To check if target device is ready for communication, use the function @ref HAL_SMBUS_IsDeviceReady() + + (#) For SMBUS IO operations, only one mode of operations is available within this driver + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master/host SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Master_Transmit_IT() + (++) At transmission end of transfer @ref HAL_SMBUS_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_SMBUS_MasterTxCpltCallback() + (+) Receive in master/host SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Master_Receive_IT() + (++) At reception end of transfer @ref HAL_SMBUS_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_SMBUS_MasterRxCpltCallback() + (+) Abort a master/host SMBUS process communication with Interrupt using @ref HAL_SMBUS_Master_Abort_IT() + (++) The associated previous transfer callback is called at the end of abort process + (++) mean @ref HAL_SMBUS_MasterTxCpltCallback() in case of previous state was master transmit + (++) mean @ref HAL_SMBUS_MasterRxCpltCallback() in case of previous state was master receive + (+) Enable/disable the Address listen mode in slave/device or host/slave SMBUS mode + using @ref HAL_SMBUS_EnableListen_IT() @ref HAL_SMBUS_DisableListen_IT() + (++) When address slave/device SMBUS match, @ref HAL_SMBUS_AddrCallback() is executed and user can + add his own code to check the Address Match Code and the transmission direction request by master/host (Write/Read). + (++) At Listen mode end @ref HAL_SMBUS_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_SMBUS_ListenCpltCallback() + (+) Transmit in slave/device SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Slave_Transmit_IT() + (++) At transmission end of transfer @ref HAL_SMBUS_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_SMBUS_SlaveTxCpltCallback() + (+) Receive in slave/device SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Slave_Receive_IT() + (++) At reception end of transfer @ref HAL_SMBUS_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_SMBUS_SlaveRxCpltCallback() + (+) Enable/Disable the SMBUS alert mode using @ref HAL_SMBUS_EnableAlert_IT() @ref HAL_SMBUS_DisableAlert_IT() + (++) When SMBUS Alert is generated @ref HAL_SMBUS_ErrorCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_SMBUS_ErrorCallback() + to check the Alert Error Code using function @ref HAL_SMBUS_GetError() + (+) Get HAL state machine or error values using @ref HAL_SMBUS_GetState() or @ref HAL_SMBUS_GetError() + (+) In case of transfer Error, @ref HAL_SMBUS_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_SMBUS_ErrorCallback() + to check the Error Code using function @ref HAL_SMBUS_GetError() + + *** SMBUS HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SMBUS HAL driver. + + (+) @ref __HAL_SMBUS_ENABLE: Enable the SMBUS peripheral + (+) @ref __HAL_SMBUS_DISABLE: Disable the SMBUS peripheral + (+) @ref __HAL_SMBUS_GET_FLAG: Check whether the specified SMBUS flag is set or not + (+) @ref __HAL_SMBUS_CLEAR_FLAG: Clear the specified SMBUS pending flag + (+) @ref __HAL_SMBUS_ENABLE_IT: Enable the specified SMBUS interrupt + (+) @ref __HAL_SMBUS_DISABLE_IT: Disable the specified SMBUS interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_SMBUS_RegisterCallback() or @ref HAL_SMBUS_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function @ref HAL_SMBUS_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : @ref HAL_SMBUS_RegisterAddrCallback. + [..] + Use function @ref HAL_SMBUS_UnRegisterCallback to reset a callback to the default + weak function. + @ref HAL_SMBUS_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : @ref HAL_SMBUS_UnRegisterAddrCallback. + [..] + By default, after the @ref HAL_SMBUS_Init() and when the state is @ref HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_SMBUS_MasterTxCpltCallback(), @ref HAL_SMBUS_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_SMBUS_Init()/ @ref HAL_SMBUS_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the @ref HAL_SMBUS_Init()/ @ref HAL_SMBUS_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_SMBUS_RegisterCallback() before calling @ref HAL_SMBUS_DeInit() + or @ref HAL_SMBUS_Init() function. + [..] + When the compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the SMBUS HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMBUS SMBUS + * @brief SMBUS HAL module driver + * @{ + */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Define SMBUS Private Constants + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFUL) /*!< SMBUS TIMING clear register Mask */ +#define HAL_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define HAL_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TC (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define MAX_NBYTE_SIZE 255U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout); + +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); + +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus); + +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus); + +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @defgroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the SMBUSx peripheral: + + (+) User must Implement HAL_SMBUS_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, IT and NVIC ). + + (+) Call the function HAL_SMBUS_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Bus Timeout + (++) Analog Filer mode + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + (++) Packet Error Check mode + (++) Peripheral mode + + + (+) Call the function HAL_SMBUS_DeInit() to restore the default configuration + of the selected SMBUSx peripheral. + + (+) Enable/Disable Analog/Digital filters with HAL_SMBUS_ConfigAnalogFilter() and + HAL_SMBUS_ConfigDigitalFilter(). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SMBUS according to the specified parameters + * in the SMBUS_InitTypeDef and initialize the associated handle. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(hsmbus->Init.AnalogFilter)); + assert_param(IS_SMBUS_OWN_ADDRESS1(hsmbus->Init.OwnAddress1)); + assert_param(IS_SMBUS_ADDRESSING_MODE(hsmbus->Init.AddressingMode)); + assert_param(IS_SMBUS_DUAL_ADDRESS(hsmbus->Init.DualAddressMode)); + assert_param(IS_SMBUS_OWN_ADDRESS2(hsmbus->Init.OwnAddress2)); + assert_param(IS_SMBUS_OWN_ADDRESS2_MASK(hsmbus->Init.OwnAddress2Masks)); + assert_param(IS_SMBUS_GENERAL_CALL(hsmbus->Init.GeneralCallMode)); + assert_param(IS_SMBUS_NO_STRETCH(hsmbus->Init.NoStretchMode)); + assert_param(IS_SMBUS_PEC(hsmbus->Init.PacketErrorCheckMode)); + assert_param(IS_SMBUS_PERIPHERAL_MODE(hsmbus->Init.PeripheralMode)); + + if (hsmbus->State == HAL_SMBUS_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmbus->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + + if (hsmbus->MspInitCallback == NULL) + { + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hsmbus->MspInitCallback(hsmbus); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /*---------------------------- SMBUSx TIMINGR Configuration ------------------------*/ + /* Configure SMBUSx: Frequency range */ + hsmbus->Instance->TIMINGR = hsmbus->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- SMBUSx TIMEOUTR Configuration ------------------------*/ + /* Configure SMBUSx: Bus Timeout */ + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TIMOUTEN; + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TEXTEN; + hsmbus->Instance->TIMEOUTR = hsmbus->Init.SMBusTimeout; + + /*---------------------------- SMBUSx OAR1 Configuration -----------------------*/ + /* Configure SMBUSx: Own Address1 and ack own address1 mode */ + hsmbus->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + if (hsmbus->Init.OwnAddress1 != 0UL) + { + if (hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_7BIT) + { + hsmbus->Instance->OAR1 = (I2C_OAR1_OA1EN | hsmbus->Init.OwnAddress1); + } + else /* SMBUS_ADDRESSINGMODE_10BIT */ + { + hsmbus->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hsmbus->Init.OwnAddress1); + } + } + + /*---------------------------- SMBUSx CR2 Configuration ------------------------*/ + /* Configure SMBUSx: Addressing Master mode */ + if (hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_10BIT) + { + hsmbus->Instance->CR2 = (I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process) */ + /* AUTOEND and NACK bit will be manage during Transfer process */ + hsmbus->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- SMBUSx OAR2 Configuration -----------------------*/ + /* Configure SMBUSx: Dual mode and Own Address2 */ + hsmbus->Instance->OAR2 = (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2 | (hsmbus->Init.OwnAddress2Masks << 8U)); + + /*---------------------------- SMBUSx CR1 Configuration ------------------------*/ + /* Configure SMBUSx: Generalcall and NoStretch mode */ + hsmbus->Instance->CR1 = (hsmbus->Init.GeneralCallMode | hsmbus->Init.NoStretchMode | hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode | hsmbus->Init.AnalogFilter); + + /* Enable Slave Byte Control only in case of Packet Error Check is enabled and SMBUS Peripheral is set in Slave mode */ + if ((hsmbus->Init.PacketErrorCheckMode == SMBUS_PEC_ENABLE) + && ((hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))) + { + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + } + + /* Enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the SMBUS peripheral. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the SMBUS Peripheral Clock */ + __HAL_SMBUS_DISABLE(hsmbus); + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + if (hsmbus->MspDeInitCallback == NULL) + { + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hsmbus->MspDeInitCallback(hsmbus); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspDeInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_RESET; + hsmbus->State = HAL_SMBUS_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} + +/** + * @brief Initialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Configure Analog noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref SMBUS_ANALOGFILTER_ENABLE + * @arg @ref SMBUS_ANALOGFILTER_DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(AnalogFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Reset ANOFF bit */ + hsmbus->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hsmbus->Instance->CR1 |= AnalogFilter; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure Digital noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_DIGITAL_FILTER(DigitalFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Get the old register value */ + tmpreg = hsmbus->Instance->CR1; + + /* Reset I2C DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << I2C_CR1_DNF_Pos; + + /* Store the new register value */ + hsmbus->Instance->CR1 = tmpreg; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMBUS Callback + * To be used instead of the weak predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = pCallback; + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = pCallback; + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +/** + * @brief Unregister an SMBUS Callback + * SMBUS callback is redirected to the weak predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +/** + * @brief Register the Slave Address Match SMBUS Callback + * To be used instead of the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +/** + * @brief UnRegister the Slave Address Match SMBUS Callback + * Info Ready SMBUS Callback is redirected to the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMBUS data + transfers. + + (#) Blocking mode function to check if device is ready for usage is : + (++) HAL_SMBUS_IsDeviceReady() + + (#) There is only one mode of transfer: + (++) Non-Blocking mode : The communication is performed using Interrupts. + These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated SMBUS IRQ when using Interrupt mode. + + (#) Non-Blocking mode functions with Interrupt are : + (++) HAL_SMBUS_Master_Transmit_IT() + (++) HAL_SMBUS_Master_Receive_IT() + (++) HAL_SMBUS_Slave_Transmit_IT() + (++) HAL_SMBUS_Slave_Receive_IT() + (++) HAL_SMBUS_EnableListen_IT() or alias HAL_SMBUS_EnableListen_IT() + (++) HAL_SMBUS_DisableListen_IT() + (++) HAL_SMBUS_EnableAlert_IT() + (++) HAL_SMBUS_DisableAlert_IT() + + (#) A set of Transfer Complete Callbacks are provided in non-Blocking mode: + (++) HAL_SMBUS_MasterTxCpltCallback() + (++) HAL_SMBUS_MasterRxCpltCallback() + (++) HAL_SMBUS_SlaveTxCpltCallback() + (++) HAL_SMBUS_SlaveRxCpltCallback() + (++) HAL_SMBUS_AddrCallback() + (++) HAL_SMBUS_ListenCpltCallback() + (++) HAL_SMBUS_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_GENERATE_START_WRITE); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) && (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_GENERATE_START_WRITE); + } + + /* If PEC mode is enable, size to transmit manage by SW part should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_GENERATE_START_READ); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, Misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) && (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_GENERATE_START_READ); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master/host SMBUS process communication with Interrupt. + * @note This abort can be called only if state is ready + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress) +{ + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + /* Keep the same state as previous */ + /* to perform as well the call of the corresponding end of transfer callback */ + if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + } + else if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set NBYTES to 1 to generate a dummy read on SMBUS peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, 1, SMBUS_AUTOEND_MODE, SMBUS_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + } + else + { + /* Nothing to do */ + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_TX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_TX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_NO_STARTSTOP); + } + else + { + /* Set NBYTE to transmit */ + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_RX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_RX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferSize = Size; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Set NBYTE to receive */ + /* If XferSize equal "1", or XferSize equal "2" with PEC requested (mean 1 data byte + 1 PEC byte */ + /* no need to set RELOAD bit mode, a ACK will be automatically generated in that case */ + /* else need to set RELOAD bit mode to generate an automatic ACK at each byte Received */ + /* This RELOAD bit will be reset for last BYTE to be receive in SMBUS_Slave_ISR */ + if (((SMBUS_GET_PEC_MODE(hsmbus) != 0UL) && (hsmbus->XferSize == 2U)) || (hsmbus->XferSize == 1U)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + } + else + { + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions | SMBUS_RELOAD_MODE, SMBUS_NO_STARTSTOP); + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + + /* Enable the Address Match interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hsmbus->State == HAL_SMBUS_STATE_LISTEN) + { + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Disable the Address Match interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 |= I2C_CR1_ALERTEN; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + + /* Enable Alert Interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} +/** + * @brief Disable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 &= ~I2C_CR1_ALERTEN; + + /* Disable Alert Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} + +/** + * @brief Check if target device is ready for communication. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t SMBUS_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BUSY) != RESET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + do + { + /* Generate Start */ + hsmbus->Instance->CR2 = SMBUS_GENERATE_START(hsmbus->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + return HAL_ERROR; + } + } + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (SMBUS_Trials == Trials) + { + /* Generate Stop */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Increment Trials */ + SMBUS_Trials++; + } + while (SMBUS_Trials < Trials); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief Handle SMBUS event interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + /* Use a local variable to store the current ISR flags */ + /* This action will avoid a wrong treatment due to ISR flags change during interrupt handler */ + uint32_t tmpisrvalue = READ_REG(hsmbus->Instance->ISR); + uint32_t tmpcr1value = READ_REG(hsmbus->Instance->CR1); + + /* SMBUS in mode Transmitter ---------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)) != RESET) && ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TXIS) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_TX) == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Receiver ----------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_RXI)) != RESET) && ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_RXNE) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_RX) == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Listener Only --------------------------------------------------*/ + if (((SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_ADDRI) != RESET) || (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_STOPI) != RESET) || (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_NACKI) != RESET)) && ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_ADDR) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + } +} + +/** + * @brief Handle SMBUS error interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + SMBUS_ITErrorHandler(hsmbus); +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterRxCpltCallback() could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveRxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param TransferDirection Master request Transfer Direction (Write/Read) + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief SMBUS error callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ErrorCallback() could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMBUS handle state. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL state + */ +uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus) +{ + /* Return SMBUS handle state */ + return hsmbus->State; +} + +/** +* @brief Return the SMBUS error code. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. +* @retval SMBUS Error Code +*/ +uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus) +{ + return hsmbus->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @brief Data transfers Private functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint16_t DevAddress; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + /* Check and treat errors if errors occurs during STOP process */ + SMBUS_ITErrorHandler(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Flush remaining data in Fifo register in case of error occurs before TXEmpty */ + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Re-enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + /* Store Last receive data if any */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + DevAddress = (uint16_t)(hsmbus->Instance->CR2 & I2C_CR2_SADD); + + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, DevAddress, MAX_NBYTE_SIZE, (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + else if ((hsmbus->XferCount == 0U) && (hsmbus->XferSize == 0U)) + { + /* Call TxCpltCallback() if no stop mode is set */ + if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TC) != RESET) + { + if (hsmbus->XferCount == 0U) + { + /* Specific use case for Quick command */ + if (hsmbus->pBuffPtr == NULL) + { + /* Generate a Stop command */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + } + /* Call TxCpltCallback() if no stop mode is set */ + else if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when SMBUS_AUTOEND_MODE enable */ + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint8_t TransferDirection; + uint16_t SlaveAddrCode; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Check that SMBUS transfer finished */ + /* if yes, normal usecase, a NACK is sent by the HOST when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hsmbus->XferCount == 0U) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + } + else + { + /* if no, error usecase, a Non-Acknowledge of last Data is generated by the HOST*/ + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set HAL State to "Idle" State, mean to LISTEN state */ + /* So reset Slave Busy state */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Disable RX/TX Interrupts, keep only ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_ADDR) != RESET) + { + TransferDirection = (uint8_t)(SMBUS_GET_DIR(hsmbus)); + SlaveAddrCode = (uint16_t)(SMBUS_GET_ADDR_MATCH(hsmbus)); + + /* Disable ADDR interrupt to prevent multiple ADDRInterrupt*/ + /* Other ADDRInterrupt will be treat in next Listen usecase */ + __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_ADDRI); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call Slave Addr callback */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#else + HAL_SMBUS_AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if ((SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) || (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET)) + { + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferSize--; + hsmbus->XferCount--; + + if (hsmbus->XferCount == 1U) + { + /* Receive last Byte, can be PEC byte in case of PEC BYTE enabled */ + /* or only the last Byte of Transfer */ + /* So reset the RELOAD bit mode */ + hsmbus->XferOptions &= ~SMBUS_RELOAD_MODE; + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + } + else if (hsmbus->XferCount == 0U) + { + /* Last Byte is received, disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_RX, keep only HAL_SMBUS_STATE_LISTEN */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveRxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Set Reload for next Bytes */ + SMBUS_TransferConfig(hsmbus, 0, 1, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_NO_STARTSTOP); + + /* Ack last Byte Read */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + } + } + else if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, 0, MAX_NBYTE_SIZE, (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hsmbus->XferCount > 0U) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferCount--; + hsmbus->XferSize--; + } + + if (hsmbus->XferCount == 0U) + { + /* Last Byte is Transmitted */ + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_TX, keep only HAL_SMBUS_STATE_LISTEN */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveTxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + + /* Check if STOPF is set */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + /* Store Last receive data if any */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable RX and TX Interrupts */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Disable ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + /* Disable Address Acknowledge */ + hsmbus->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear ADDR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + hsmbus->XferOptions = 0; + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ListenCpltCallback(hsmbus); +#else + HAL_SMBUS_ListenCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Manage the enabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + + if ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT) + { + /* Enable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Enable ADDR, STOP interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI; + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_RXI; + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of SMBUS interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_SMBUS_ENABLE_IT(hsmbus, tmpisr); +} +/** + * @brief Manage the disabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + uint32_t tmpstate = hsmbus->State; + + if ((tmpstate == HAL_SMBUS_STATE_READY) && ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Disable TC, STOP, NACK and TXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_TXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Disable TC, STOP, NACK and RXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_RXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Disable ADDR, STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI; + + if (SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_SMBUS_DISABLE_IT(hsmbus, tmpisr); +} + +/** + * @brief SMBUS interrupts error handler. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus) +{ + uint32_t itflags = READ_REG(hsmbus->Instance->ISR); + uint32_t itsources = READ_REG(hsmbus->Instance->CR1); + uint32_t tmpstate; + uint32_t tmperror; + + /* SMBUS Bus error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_BERR) == SMBUS_FLAG_BERR) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_BERR); + } + + /* SMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if (((itflags & SMBUS_FLAG_OVR) == SMBUS_FLAG_OVR) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_OVR); + } + + /* SMBUS Arbitration Loss error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_ARLO) == SMBUS_FLAG_ARLO) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ARLO); + } + + /* SMBUS Timeout error interrupt occurred ---------------------------------------------*/ + if (((itflags & SMBUS_FLAG_TIMEOUT) == SMBUS_FLAG_TIMEOUT) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BUSTIMEOUT; + + /* Clear TIMEOUT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TIMEOUT); + } + + /* SMBUS Alert error interrupt occurred -----------------------------------------------*/ + if (((itflags & SMBUS_FLAG_ALERT) == SMBUS_FLAG_ALERT) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ALERT; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + } + + /* SMBUS Packet Error Check error interrupt occurred ----------------------------------*/ + if (((itflags & SMBUS_FLAG_PECERR) == SMBUS_FLAG_PECERR) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_PECERR; + + /* Clear PEC error flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_PECERR); + } + + /* Store current volatile hsmbus->State, misra rule */ + tmperror = hsmbus->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror != HAL_SMBUS_ERROR_NONE) && (tmperror != HAL_SMBUS_ERROR_ACKF)) + { + /* Do not Reset the HAL state in case of ALERT error */ + if ((tmperror & HAL_SMBUS_ERROR_ALERT) != HAL_SMBUS_ERROR_ALERT) + { + /* Store current volatile hsmbus->State, misra rule */ + tmpstate = hsmbus->State; + + if (((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + || ((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)) + { + /* Reset only HAL_SMBUS_STATE_SLAVE_BUSY_XX */ + /* keep HAL_SMBUS_STATE_LISTEN if set */ + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + } + } + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle SMBUS Communication Timeout. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param Flag Specifies the SMBUS flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + while ((FlagStatus)(__HAL_SMBUS_GET_FLAG(hsmbus, Flag)) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + } + } + + return HAL_OK; +} + +/** + * @brief Handle SMBUSx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hsmbus SMBUS handle. + * @param DevAddress specifies the slave address to be programmed. + * @param Size specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the SMBUS START condition generation. + * This parameter can be one or a combination of the following values: + * @arg @ref SMBUS_RELOAD_MODE Enable Reload mode. + * @arg @ref SMBUS_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref SMBUS_SOFTEND_MODE Enable Software end mode and Reload mode. + * @arg @ref SMBUS_SENDPEC_MODE Enable Packet Error Calculation mode. + * @param Request New state of the SMBUS START condition generation. + * This parameter can be one of the following values: + * @arg @ref SMBUS_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref SMBUS_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref SMBUS_GENERATE_START_READ Generate Restart for read request. + * @arg @ref SMBUS_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_TRANSFER_MODE(Mode)); + assert_param(IS_SMBUS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hsmbus->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31UL - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_PECBYTE)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Convert SMBUSx OTHER_xxx XferOptions to functional XferOptions. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus) +{ + /* if user set XferOptions to SMBUS_OTHER_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME */ + if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME; + } + /* else if user set XferOptions to SMBUS_OTHER_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE */ + else if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_NO_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_NO_PEC; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC; + } + else + { + /* Nothing to do */ + } +} +/** + * @} + */ + +#endif /* HAL_SMBUS_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c new file mode 100644 index 0000000..836ffb3 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c @@ -0,0 +1,4308 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi.c + * @author MCD Application Team + * @brief SPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream/Channel + (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel + + (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SPI_MspInit() API. + [..] + Circular mode restriction: + (#) The DMA circular mode cannot be used when the SPI is configured in these modes: + (##) Master 2Lines RxOnly + (##) Master 1Line Rx + (#) The CRC feature is not managed when the DMA circular mode is enabled + (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs + the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks + [..] + Master Receive mode restriction: + (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or + bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI + does not initiate a new transfer the following procedure has to be respected: + (##) HAL_SPI_DeInit() + (##) HAL_SPI_Init() + [..] + Callback registration: + + (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. + + Function HAL_SPI_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + + [..] + By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() + or HAL_SPI_Init() function. + + [..] + When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, + the following table resume the max SPI frequency reached with data size 8bits/16bits, + according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. + + @endverbatim + + Additional table : + + DataSize = SPI_DATASIZE_8BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + + DataSize = SPI_DATASIZE_16BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits), + SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). + @note + (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA() + (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() + (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() + + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_DEFAULT_TIMEOUT 100U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAError(DMA_HandleTypeDef *hdma); +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart); +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +#if (USE_SPI_CRC != 0U) +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +#endif /* USE_SPI_CRC */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + (++) CRC Length, used only with Data8 and Data16 + (++) FIFO reception threshold + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SPI according to the specified parameters + * in the SPI_InitTypeDef and initialize the associated handle. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + uint32_t frxth; + + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) + { + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + } + else + { + /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ + hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + } + } + else + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + + /* Force polarity and phase to TI protocaol requirements */ + hspi->Init.CLKPolarity = SPI_POLARITY_LOW; + hspi->Init.CLKPhase = SPI_PHASE_1EDGE; + } +#if (USE_SPI_CRC != 0U) + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); + } +#else + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; +#endif /* USE_SPI_CRC */ + + if (hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + /* Init the SPI Callback settings */ + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + + if (hspi->MspInitCallback == NULL) + { + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hspi->MspInitCallback(hspi); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Align by default the rs fifo threshold on the data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + frxth = SPI_RXFIFO_THRESHOLD_HF; + } + else + { + frxth = SPI_RXFIFO_THRESHOLD_QF; + } + + /* CRC calculation is valid only for 16Bit and 8 Bit */ + if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT)) + { + /* CRC must be disabled */ + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + } + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, + Communication speed, First bit and CRC calculation state */ + WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | + (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | + (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | + (hspi->Init.CLKPhase & SPI_CR1_CPHA) | + (hspi->Init.NSS & SPI_CR1_SSM) | + (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | + (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | + (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCL Configuration -------------------*/ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Align the CRC Length on the data size */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) + { + /* CRC Length aligned on the data size : value set by default */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT; + } + else + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT; + } + } + + /* Configure : CRC Length */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL); + } + } +#endif /* USE_SPI_CRC */ + + /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */ + WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | + (hspi->Init.TIMode & SPI_CR2_FRF) | + (hspi->Init.NSSPMode & SPI_CR2_NSSP) | + (hspi->Init.DataSize & SPI_CR2_DS_Msk) | + (frxth & SPI_CR2_FRXTH))); + +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); + } +#endif /* USE_SPI_CRC */ + +#if defined(SPI_I2SCFGR_I2SMOD) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2SCFGR_I2SMOD */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-Initialize the SPI peripheral. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check SPI Instance parameter */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + if (hspi->MspDeInitCallback == NULL) + { + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hspi->MspDeInitCallback(hspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspInit should be implemented in the user file + */ +} + +/** + * @brief De-Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit should be implemented in the user file + */ +} + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SPI Callback + * To be used instead of the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = pCallback; + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = pCallback; + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = pCallback; + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} + +/** + * @brief Unregister an SPI Callback + * SPI callback is redirected to the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + uint16_t initial_TxXferCount; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + initial_TxXferCount = Size; + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + /* Transmit data in 16 Bit mode */ + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } + /* Transmit data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + +error: + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + /* this is done to handle the CRCNEXT before the latest data */ + hspi->RxXferCount--; + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Configure communication direction: 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Receive data in 8 Bit mode */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + /* read the received data */ + (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } + else + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Handle the CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* freeze the CRC before the latest data */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + + /* Read the latest data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* the latest data has not been received */ + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Receive last data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + } + /* Receive last data in 8 Bit mode */ + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + } + + /* Wait the CRC data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Read CRC to Flush DR and RXNE flag */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + READ_REG(hspi->Instance->DR); + } + else + { + /* Read 8bit CRC */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + +error : + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout) +{ + uint16_t initial_TxXferCount; + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + uint32_t spi_cr1; + uint32_t spi_cr2; +#endif /* USE_SPI_CRC */ + + /* Variable used to alternate Rx and Tx during transfer */ + uint32_t txallowed = 1U; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + initial_TxXferCount = Size; +#if (USE_SPI_CRC != 0U) + spi_cr1 = READ_REG(hspi->Instance->CR1); + spi_cr2 = READ_REG(hspi->Instance->CR2); +#endif /* USE_SPI_CRC */ + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferCount = Size; + hspi->RxXferSize = Size; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferCount = Size; + hspi->TxXferSize = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set fiforxthreshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit and Receive data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Check RXNE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Wait until RXNE flag is reset */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Read CRC from DR to close CRC calculation process */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until TXE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read CRC */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + READ_REG(hspi->Instance->DR); + } + else + { + /* Read 8bit CRC */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + } + } + } + + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + /* Clear CRC Flag */ + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + + errorcode = HAL_ERROR; + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + errorcode = HAL_ERROR; + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +error : + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->RxISR = NULL; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + +error : + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->TxISR = NULL; + + /* Check the data size to adapt Rx threshold and the set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_16BIT; + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_2linesRxISR_16BIT; + hspi->TxISR = SPI_2linesTxISR_16BIT; + } + else + { + hspi->RxISR = SPI_2linesRxISR_8BIT; + hspi->TxISR = SPI_2linesTxISR_8BIT; + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Check if packing mode is enabled and if there is more than 2 data to receive */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U)) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Enable TXE, RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmatx->XferAbortCallback = NULL; + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + /* Packing mode is enabled only if the DMA setting is HALWORD */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Check the even/odd of the data size + crc if enabled */ + if ((hspi->TxXferCount & 0x1U) == 0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U); + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + +error: + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx & tx dma handles */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Reset the threshold bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX); + + /* The packing mode management is enabled by the DMA settings according the spi data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + if ((hspi->TxXferSize & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = hspi->TxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + /* Set the SPI Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + } + else + { + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + } + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + hspi->hdmatx->XferHalfCpltCallback = NULL; + hspi->hdmatx->XferCpltCallback = NULL; + hspi->hdmatx->XferErrorCallback = NULL; + hspi->hdmatx->XferAbortCallback = NULL; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Abort ongoing transfer (blocking mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); + } + } + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + return errorcode; +} + +/** + * @brief Abort ongoing transfer (Interrupt mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + uint32_t abortcplt ; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + abortcplt = 1U; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hspi->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; + } + else + { + hspi->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hspi->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; + } + else + { + hspi->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) + { + hspi->hdmatx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) + { + hspi->hdmarx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + return errorcode; +} + +/** + * @brief Pause the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Enable the SPI DMA Tx & Rx requests */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() + */ + + /* Abort the SPI DMA tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + /* Abort the SPI DMA rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + hspi->State = HAL_SPI_STATE_READY; + return errorcode; +} + +/** + * @brief Handle SPI interrupt request. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval None + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + uint32_t itsource = hspi->Instance->CR2; + uint32_t itflag = hspi->Instance->SR; + + /* SPI in mode Receiver ----------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && + (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) + { + hspi->RxISR(hspi); + return; + } + + /* SPI in mode Transmitter -------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) + { + hspi->TxISR(hspi); + return; + } + + /* SPI in Error Treatment --------------------------------------------------*/ + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + { + /* SPI Overrun error interrupt occurred ----------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + { + if (hspi->State != HAL_SPI_STATE_BUSY_TX) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + else + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + return; + } + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Disable all interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); + + hspi->State = HAL_SPI_STATE_READY; + /* Disable the SPI DMA requests if enabled */ + if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) + { + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); + + /* Abort the SPI DMA Rx channel */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + /* Abort the SPI DMA Tx channel */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Half Transfer callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief SPI error callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback should be implemented in the user file + */ + /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred + */ +} + +/** + * @brief SPI Abort Complete callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI handle state. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) +{ + /* Return SPI handle state */ + return hspi->State; +} + +/** + * @brief Return the SPI error code. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI error code in bitmap format + */ +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) +{ + /* Return SPI ErrorCode */ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SPI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief DMA SPI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received data is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->TxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Tx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Read 16bit CRC */ + READ_REG(hspi->Instance->DR); + } + else + { + /* Read 8bit CRC */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check if we are in Master RX 2 line mode */ + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + } + else + { + /* Normal case */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT)) + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT, + tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC to Flush DR and RXNE flag */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + } + else + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC to Flush DR and RXNE flag */ + READ_REG(hspi->Instance->DR); + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Rx/Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + hspi->TxXferCount = 0U; + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxHalfCpltCallback(hspi); +#else + HAL_SPI_TxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxHalfCpltCallback(hspi); +#else + HAL_SPI_RxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user TxRx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxHalfCpltCallback(hspi); +#else + HAL_SPI_TxRxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Stop the disable DMA transfer on SPI side */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + hspi->hdmatx->XferAbortCallback = NULL; + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmarx != NULL) + { + if (hspi->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + hspi->hdmarx->XferAbortCallback = NULL; + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmatx != NULL) + { + if (hspi->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in packing mode */ + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount == 1U) + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + /* Receive data in 8 Bit mode */ + else + { + *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + + /* Check end of the reception */ + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_2linesRxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + /* Read 8bit CRC to flush Data Register */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + + hspi->CRCSize--; + + /* Check end of the reception */ + if (hspi->CRCSize == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in packing Bit mode */ + if (hspi->TxXferCount >= 2U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + /* Transmit data in 8 Bit mode */ + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + + /* Check the end of the transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +/** + * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 16 Bit mode */ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_2linesRxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + /* Read 16bit CRC to flush Data Register */ + READ_REG(hspi->Instance->DR); + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + SPI_CloseRxTx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 8-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + /* Read 8bit CRC to flush Data Register */ + READ_REG(*(__IO uint8_t *)&hspi->Instance->DR); + + hspi->CRCSize--; + + if (hspi->CRCSize == 0U) + { + SPI_CloseRx_ISR(hspi); + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the receive 8-bit in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + /* Read 16bit CRC to flush Data Register */ + READ_REG(hspi->Instance->DR); + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + SPI_CloseRx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +/** + * @brief Handle the data 8-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle the data 16-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle SPI Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag SPI flag to check + * @param State flag state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); + + while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if(count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle SPI FIFO Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Fifo Fifo to check + * @param State Fifo state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U); + + while ((hspi->Instance->SR & Fifo) != State) + { + if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY)) + { + /* Read 8bit CRC to flush Data Register */ + READ_REG(*((__IO uint8_t *)&hspi->Instance->DR)); + } + + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if(count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle the check of the RX transaction complete. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Handle the check of the RXTX or TX transaction complete. + * @param hspi SPI handle + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + /* Control if the TX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control if the RX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + return HAL_OK; +} + +/** + * @brief Handle the end of the RXTX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + hspi->State = HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the RX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) +{ + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the TX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Disable TXE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle abort a Rx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @brief Handle abort a Tx or Rx/Tx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable TXEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); + + /* Check TXEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c new file mode 100644 index 0000000..42c86b6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c @@ -0,0 +1,115 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi_ex.c + * @author MCD Application Team + * @brief Extended SPI HAL module driver. + * This file provides firmware functions to manage the following + * SPI peripheral extended functionalities : + * + IO operation functions + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPIEx SPIEx + * @brief SPI Extended HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPIEx_Private_Constants SPIEx Private Constants + * @{ + */ +#define SPI_FIFO_SIZE 4UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions + * @{ + */ + +/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of extended functions to manage the SPI + data transfers. + + (#) Rx data flush function: + (++) HAL_SPIEx_FlushRxFifo() + +@endverbatim + * @{ + */ + +/** + * @brief Flush the RX fifo. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg; + uint8_t count = 0U; + while ((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY) + { + count++; + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); /* To avoid GCC warning */ + if (count == SPI_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c new file mode 100644 index 0000000..7e67120 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c @@ -0,0 +1,7719 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_TIM_RegisterCallback() to register a callback. + @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup TIM_Private_Constants + * @{ + */ +#define TIMx_OR1_OCREF_CLR 0x00000001U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + break; + } + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + break; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + break; + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_ALL: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + default: + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + default: + break; + } + + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + break; + } + + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + break; + } + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } +#if defined(COMP1) || defined(COMP2) || defined(COMP3) +#if defined(COMP1) && defined(COMP2) + case TIM_CLEARINPUTSOURCE_COMP1: + case TIM_CLEARINPUTSOURCE_COMP2: +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) + case TIM_CLEARINPUTSOURCE_COMP3: +#endif /* COMP3 */ + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* OCREF_CLR_INT is connected to COMPx output */ + MODIFY_REG(htim->Instance->OR1, TIMx_OR1_OCREF_CLR, sClearInputConfig->ClearInputSource); + break; + } +#endif /* COMP1 || COMP2 || COMP3 */ + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } + + default: + break; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */ + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */ + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */ + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */ + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */ + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */ + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */ + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */ + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */ + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */ + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */ + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */ + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2 Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */ + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */ + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */ + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */ + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */ + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */ + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */ + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */ + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */ + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */ + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */ + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */ + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + break; + } + return HAL_OK; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2Callback */ +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c new file mode 100644 index 0000000..7b07d4c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c @@ -0,0 +1,2800 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + break; + } + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + break; + } + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); + HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @param htim TIM One Pulse handle + * @param OutputChannel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Select timer input source. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); + + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); + + /* Set BREAK AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); + } + + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); + + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_AFMODE(sBreakDeadTimeConfig->Break2AFMode)); + + /* Set BREAK2 AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, sBreakDeadTimeConfig->Break2AFMode); + } + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) + +{ + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM1_AF1_BKINE; + bkin_enable_bitpos = TIM1_AF1_BKINE_Pos; + bkin_polarity_mask = TIM1_AF1_BKINP; + bkin_polarity_bitpos = TIM1_AF1_BKINP_Pos; + break; + } +#if defined(COMP1) && defined(COMP2) + case TIM_BREAKINPUTSOURCE_COMP1: + { + bkin_enable_mask = TIM1_AF1_BKCMP1E; + bkin_enable_bitpos = TIM1_AF1_BKCMP1E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP1P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP1P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP2: + { + bkin_enable_mask = TIM1_AF1_BKCMP2E; + bkin_enable_bitpos = TIM1_AF1_BKCMP2E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP2P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP2P_Pos; + break; + } +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) + case TIM_BREAKINPUTSOURCE_COMP3: + { + bkin_enable_mask = TIM1_AF1_BKCMP3E; + bkin_enable_bitpos = TIM1_AF1_BKCMP3E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP3P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP3P_Pos; + break; + } +#endif /* COMP3 */ + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_AF2 register value */ + tmporx = htim->Instance->AF2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF2 */ + htim->Instance->AF2 = tmporx; + break; + } + default: + break; + } + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM1, the parameter can take one of the following values: + * @arg TIM_TIM1_ETR_GPIO: TIM1 ETR is is connected to GPIO + * @arg TIM_TIM1_ETR_COMP1: TIM1 ETR is connected to COMP1 output + * @arg TIM_TIM1_ETR_COMP2: TIM1 ETR is connected to COMP2 output + * @arg TIM_TIM1_ETR_COMP3: TIM1 ETR is connected to COMP3 output (**) + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1 ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1 ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1 ETR is connected to ADC1 AWD3 + * + * For TIM2, the parameter can take one of the following values: (*) + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * @arg TIM_TIM2_ETR_COMP3: TIM2_ETR is connected to COMP3 output (**) + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_MCO: TIM2_ETR is connected to MCO (**) + * @arg TIM_TIM2_ETR_MCO2: TIM2_ETR is connected to MCO2 (**) + * + * For TIM3, the parameter can take one of the following values: + * @arg TIM_TIM3_ETR_GPIO TIM3_ETR is connected to GPIO + * @arg TIM_TIM3_ETR_COMP1 TIM3_ETR is connected to COMP1 output + * @arg TIM_TIM3_ETR_COMP2 TIM3_ETR is connected to COMP2 output + * @arg TIM_TIM3_ETR_COMP3 TIM3_ETR is connected to COMP3 output (**) + * + * For TIM4, the parameter can take one of the following values:(*) + * @arg TIM_TIM4_ETR_GPIO TIM4_ETR is connected to GPIO + * @arg TIM_TIM4_ETR_COMP1 TIM4_ETR is connected to COMP1 output + * @arg TIM_TIM4_ETR_COMP2 TIM4_ETR is connected to COMP2 output + * @arg TIM_TIM4_ETR_COMP3 TIM4_ETR is connected to COMP3 output (**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(Remap)); + + __HAL_LOCK(htim); + + MODIFY_REG(htim->Instance->AF1, TIM1_AF1_ETRSEL_Msk, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Select the timer input source + * @param htim TIM handle. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TI1 input channel + * @arg TIM_CHANNEL_2: TI2 input channel + * @arg TIM_CHANNEL_3: TI3 input channel + * @param TISelection specifies the timer input source + * + * For TIM1 this parameter can be one of the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * @arg TIM_TIM1_TI2_GPIO: TIM1 TI2 is connected to GPIO + * @arg TIM_TIM1_TI2_COMP2: TIM1 TI2 is connected to COMP2 output + * @arg TIM_TIM1_TI3_GPIO: TIM1 TI3 is connected to GPIO + * @arg TIM_TIM1_TI3_COMP3: TIM1 TI3 is connected to COMP3 output (**) + * + * For TIM2, the parameter is one of the following values: (*) + * @arg TIM_TIM2_TI1_GPIO: TIM2 TI1 is connected to GPIO + * @arg TIM_TIM2_TI1_COMP1: TIM2 TI1 is connected to COMP1 output + * @arg TIM_TIM2_TI2_GPIO: TIM2 TI2 is connected to GPIO + * @arg TIM_TIM2_TI2_COMP2: TIM2 TI2 is connected to COMP2 output + * @arg TIM_TIM2_TI3_GPIO: TIM2 TI3 is connected to GPIO + * @arg TIM_TIM2_TI3_COMP3: TIM2 TI3 is connected to COMP3 output (**) + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO + * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output + * @arg TIM_TIM3_TI2_GPIO: TIM3 TI2 is connected to GPIO + * @arg TIM_TIM3_TI2_COMP2: TIM3 TI2 is connected to COMP2 output + * @arg TIM_TIM3_TI3_GPIO: TIM3 TI3 is connected to GPIO + * @arg TIM_TIM3_TI3_COMP3: TIM3 TI3 is connected to COMP3 output (**) + * + * For TIM4, the parameter is one of the following values: (*) + * @arg TIM_TIM4_TI1_GPIO: TIM4 TI1 is connected to GPIO + * @arg TIM_TIM4_TI1_COMP1: TIM4 TI1 is connected to COMP1 output + * @arg TIM_TIM4_TI2_GPIO: TIM4 TI2 is connected to GPIO + * @arg TIM_TIM4_TI2_COMP2: TIM4 TI2 is connected to COMP2 output + * @arg TIM_TIM4_TI3_GPIO: TIM4 TI3 is connected to GPIO + * @arg TIM_TIM4_TI3_COMP3: TIM4 TI3 is connected to COMP3 output + * + * For TIM14, the parameter is one of the following values: + * @arg TIM_TIM14_TI1_GPIO: TIM14 TI1 is connected to GPIO + * @arg TIM_TIM14_TI1_RTC: TIM14 TI1 is connected to RTC clock + * @arg TIM_TIM14_TI1_HSE_32: TIM14 TI1 is connected to HSE div 32 + * @arg TIM_TIM14_TI1_MCO: TIM14 TI1 is connected to MCO + * @arg TIM_TIM14_TI1_MCO2: TIM14 TI1 is connected to MCO2 (**) + * + * For TIM15, the parameter is one of the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_TIM2_CH1: TIM15 TI1 is connected to TIM2 CH1 + * @arg TIM_TIM15_TI1_TIM3_CH1: TIM15 TI1 is connected to TIM3 CH1 + * @arg TIM_TIM15_TI2_GPIO: TIM15 TI2 is connected to GPIO + * @arg TIM_TIM15_TI2_TIM2_CH2: TIM15 TI2 is connected to TIM2 CH2 + * @arg TIM_TIM15_TI2_TIM3_CH2: TIM15 TI2 is connected to TIM3 CH2 + * + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_RTC_WAKEUP: TIM16 TI1 is connected to TRC wakeup interrupt + * @arg TIM_TIM16_TI1_MCO2: TIM16 TI1 is connected to MCO2 (**) + * + * For TIM17, the parameter can have the following values: + * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO + * @arg TIM_TIM14_TI1_HSI: TIM17 TI1 is connected to HSI (**) + * @arg TIM_TIM17_TI1_HSE_32: TIM17 TI1 is connected to HSE div 32 + * @arg TIM_TIM17_TI1_MCO: TIM17 TI1 is connected to MCO + * @arg TIM_TIM17_TI1_MCO2: TIM17 TI1 is connected to MCO2 (**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_TIM_TISEL_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TISEL(TISelection)); + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI1SEL, TISelection); + break; + case TIM_CHANNEL_2: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI2SEL, TISelection); + break; + case TIM_CHANNEL_3: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI3SEL, TISelection); + break; + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM); + } + break; + } + default: + break; + } + + return HAL_OK; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + do + { + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != TIM_BDTR_BKDSRM) + { + return HAL_OK; + } + } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT); + + return HAL_TIMEOUT; + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) + { + /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + do + { + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != TIM_BDTR_BK2DSRM) + { + return HAL_OK; + } + } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT); + + return HAL_TIMEOUT; + } + break; + } + default: + break; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIMEx Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_rtc_alarm_template.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_rtc_alarm_template.c new file mode 100644 index 0000000..9042975 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_rtc_alarm_template.c @@ -0,0 +1,348 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_timebase_rtc_alarm_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware RTC_ALARM Template. + * + * This file override the native HAL time base functions (defined as weak) + * to use the RTC ALARM for time base generation: + * + Initializes the RTC peripheral to increment the seconds registers each 1ms + * + The alarm is configured to assert an interrupt when the RTC reaches 1ms + * + HAL_IncTick is called at each Alarm event and the time is reset to 00:00:00 + * + HSE (default), LSE or LSI can be selected as RTC clock source + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32g0xx_hal_timebase_rtc_alarm.c' + (#) Add this file and the RTC HAL drivers to your project and uncomment + HAL_RTC_MODULE_ENABLED define in stm32g0xx_hal_conf.h + + [..] + (@) HAL RTC alarm and HAL RTC wakeup drivers can’t be used with low power modes: + The wake up capability of the RTC may be intrusive in case of prior low power mode + configuration requiring different wake up sources. + Application/Example behavior is no more guaranteed + (@) The stm32g0xx_hal_timebase_tim use is recommended for the Applications/Examples + requiring low power modes + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_TimeBase_RTC_Alarm_Template HAL TimeBase RTC Alarm Template + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing + precision. + + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing + precision. + */ +/* #define RTC_CLOCK_SOURCE_HSE */ +/* #define RTC_CLOCK_SOURCE_LSE */ +#define RTC_CLOCK_SOURCE_LSI + +/* Minimize Asynchronous prescaler for power consumption : + ck_apre = RTCCLK / (ASYNC prediv + 1) + ck_spre = ck_apre/(SYNC prediv + 1) = 1 Hz */ +#if defined (RTC_CLOCK_SOURCE_LSE) +/* LSE Freq = 32.768 kHz RC */ +#define RTC_ASYNCH_PREDIV 0u +#define RTC_SYNCH_PREDIV 0x3FFFu /* (16384 - 1) */ +#elif defined (RTC_CLOCK_SOURCE_LSI) +/* LSI Freq = 32 kHz RC */ +#define RTC_ASYNCH_PREDIV 0u +#define RTC_SYNCH_PREDIV 0x3E7Fu /* (16000 - 1) */ +#elif defined (RTC_CLOCK_SOURCE_HSE) +/* HSE Freq as RTCCLK = 8 MHz / 32 = 250 kHz */ +#define RTC_ASYNCH_PREDIV 0x07u /* (8 - 1) */ +#define RTC_SYNCH_PREDIV 0x7A11u /* (31250 -1) */ +#endif + + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +RTC_HandleTypeDef hRTC_Handle = {.Init = {0}}; + +/* Private function prototypes -----------------------------------------------*/ +void RTC_TAMP_IRQHandler(void); +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the RTC ALARM A as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * Calendar time base is = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + * = 1s + * Alarm interrupt timebase is = (RTC_SYNCH_PREDIV / (1000 / uwTickFreq)) + * = 1 ms when uwTickFreq is set to 1 kHz + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + RTC_TimeTypeDef time; + RTC_DateTypeDef date; + RTC_AlarmTypeDef alarm; + + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /* Disable backup domeain protection */ + HAL_PWR_EnableBkUpAccess(); + + /* Enable RTC APB clock gating */ + __HAL_RCC_RTCAPB_CLK_ENABLE(); + + /* Disable the Alarm A */ + __HAL_RTC_ALARMA_DISABLE(&hRTC_Handle); + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + __HAL_RTC_ALARM_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_ALRAF); + + /* Get RTC clock configuration */ + HAL_RCCEx_GetPeriphCLKConfig(&PeriphClkInitStruct); + + /*In case of RTC clock already enable, make sure it's the good one */ +#if defined (RTC_CLOCK_SOURCE_LSE) + if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_LSE) && (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != 0x00u)) +#elif defined (RTC_CLOCK_SOURCE_LSI) + if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_LSI) && (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != 0x00u)) +#elif defined (RTC_CLOCK_SOURCE_HSE) + if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_HSE_DIV32) && (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0x00u)) +#else +#error Please select the RTC Clock source +#endif + { + /* Do nothing */ + } + else + { +#ifdef RTC_CLOCK_SOURCE_LSE + /* Configure LSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; +#elif defined (RTC_CLOCK_SOURCE_LSI) + /* Configure LSI as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; +#elif defined (RTC_CLOCK_SOURCE_HSE) + /* Configure HSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32; +#endif + + /* Configure oscillator */ + status = HAL_RCC_OscConfig(&RCC_OscInitStruct); + if (status == HAL_OK) + { + /* Configure RTC clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; + status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Enable RTC Clock */ + if(status == HAL_OK) + { + __HAL_RCC_RTC_ENABLE(); + } + } + } + + /* If RTC Clock configuration is ok */ + if (status == HAL_OK) + { + /* The time base is defined to have highest synchronous prescaler but keeping + a 1Hz RTC frequency. */ + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; + hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; + hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; + hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; + hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + status = HAL_RTC_Init(&hRTC_Handle); + } + + /* HAL RTC Init is ok & calendar has never been initialized */ + if((status == HAL_OK) && (__HAL_RTC_GET_FLAG(&hRTC_Handle, RTC_FLAG_INITS) == 0x00u)) + { + time.Hours = 0x00u; + time.Minutes = 0x00u; + time.Seconds = 0x00u; + time.TimeFormat = RTC_HOURFORMAT12_PM; + time.SubSeconds = 0x00u; + time.SecondFraction = 0x00u; + time.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; + time.StoreOperation = RTC_STOREOPERATION_RESET; + status = HAL_RTC_SetTime(&hRTC_Handle, &time, RTC_FORMAT_BCD); + if(status == HAL_OK) + { + date.WeekDay = RTC_WEEKDAY_MONDAY; + date.Date = 0x01u; + date.Month = RTC_MONTH_JANUARY; + date.Year = 0x01u; + status = HAL_RTC_SetDate(&hRTC_Handle, &date, RTC_FORMAT_BCD); + } + } + + /* If RTC calendar is initialized */ + if (status == HAL_OK) + { + alarm.AlarmTime.Hours = 0x00u; + alarm.AlarmTime.Minutes = 0x00u; + alarm.AlarmTime.Seconds = 0x00u; + alarm.AlarmTime.TimeFormat = RTC_HOURFORMAT12_PM; + alarm.AlarmTime.SubSeconds = (RTC_SYNCH_PREDIV / (1000 / (uint32_t)uwTickFreq)); + alarm.AlarmTime.SecondFraction = 0x00u; + alarm.AlarmTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; + alarm.AlarmTime.StoreOperation = RTC_STOREOPERATION_RESET; + alarm.AlarmMask = RTC_ALARMMASK_ALL; + + /* Depending on input frequency select Subsecond mask */ + if (uwTickFreq == HAL_TICK_FREQ_1KHZ) + { + alarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_SS14_5; + } + else if (uwTickFreq == HAL_TICK_FREQ_100HZ) + { + alarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_SS14_9; + } + else + { +#if defined (RTC_CLOCK_SOURCE_HSE) + /* When RTCCLK = 1 MHz, need to mask Subsecond register bit 12 to 14 + to have 10 Hhz interrupt */ + alarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_SS14_12; +#else + /* When RTCCLK is around 32 kHz, need to mask Subsecond register bit 12 to 11 + to have 10 Hhz interrupt */ + alarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_SS14_11; +#endif + } + alarm.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE; + alarm.AlarmDateWeekDay = RTC_WEEKDAY_MONDAY; + alarm.Alarm = RTC_ALARM_A; + status = HAL_RTC_SetAlarm_IT(&hRTC_Handle, &alarm, RTC_FORMAT_BCD); + if(status == HAL_OK) + { + /* Enable the RTC global Interrupt */ + HAL_NVIC_EnableIRQ(RTC_TAMP_IRQn); + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(RTC_TAMP_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + } + } + else + { + status = HAL_ERROR; + } + return status; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling RTC_ALRA interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Disable ALARM A Interrupt */ + __HAL_RTC_ALARM_DISABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling RTC ALARM interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Enable ALARM A interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Alarm Timer Event Callback in non blocking mode + * @note This function is called when RTC Alarm takes place, inside + * HAL_RTC_AlarmIRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + HAL_IncTick(); +} + +/** + * @brief This function handles RTC ALARM interrupt request. + * @retval None + */ +void RTC_TAMP_IRQHandler(void) +{ + HAL_RTC_AlarmIRQHandler(&hRTC_Handle); +} + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_rtc_wakeup_template.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_rtc_wakeup_template.c new file mode 100644 index 0000000..2f13753 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_rtc_wakeup_template.c @@ -0,0 +1,302 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_timebase_rtc_wakeup_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware RTC_WAKEUP Template. + * + * This file overrides the native HAL time base functions (defined as weak) + * to use the RTC WAKEUP for the time base generation: + * + Initializes the RTC peripheral and configures the wakeup timer to be + * incremented each 1ms + * + The wakeup feature is configured to assert an interrupt each 1ms + * + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback + * + HSE (default), LSE or LSI can be selected as RTC clock source + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32g0xx_hal_timebase_rtc_wakeup.c' + (#) Add this file and the RTC HAL drivers to your project and uncomment + HAL_RTC_MODULE_ENABLED define in stm32g0xx_hal_conf.h + + [..] + (@) HAL RTC alarm and HAL RTC wakeup drivers can’t be used with low power modes: + The wake up capability of the RTC may be intrusive in case of prior low power mode + configuration requiring different wake up sources. + Application/Example behavior is no more guaranteed + (@) The stm32g0xx_hal_timebase_tim use is recommended for the Applications/Examples + requiring low power modes + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing + precision. + + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing + precision. + */ +/* #define RTC_CLOCK_SOURCE_HSE */ +/* #define RTC_CLOCK_SOURCE_LSE */ +#define RTC_CLOCK_SOURCE_LSI + +#if defined (RTC_CLOCK_SOURCE_LSE) +/* LSE Freq = 32.768 kHz RC */ +#define RTC_ASYNCH_PREDIV 0x7Fu +#define RTC_SYNCH_PREDIV 0x00FFu +#elif defined (RTC_CLOCK_SOURCE_LSI) +/* LSI Freq = 32 kHz RC */ +#define RTC_ASYNCH_PREDIV 0x7Fu +#define RTC_SYNCH_PREDIV 0x00FEu +#elif defined (RTC_CLOCK_SOURCE_HSE) +/* HSE Freq as RTCCLK = 8 MHz / 32 = 250 kHz */ +#define RTC_ASYNCH_PREDIV 0x07u /* (8 - 1) */ +#define RTC_SYNCH_PREDIV 0x7A11u /* (31250 -1) */ +#endif + + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +RTC_HandleTypeDef hRTC_Handle = {.Init = {0}}; + +/* Private function prototypes -----------------------------------------------*/ +void RTC_TAMP_IRQHandler(void); + +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the RTC_TAMP as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + = 1ms + * Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1) + = 1 ms + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t wucounter; + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /* Disable backup domain protection */ + HAL_PWR_EnableBkUpAccess(); + + /* Enable RTC APB clock gating */ + __HAL_RCC_RTCAPB_CLK_ENABLE(); + + /* Disable the Wake-up Timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle); + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle,RTC_IT_WUT); + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle,RTC_FLAG_WUTF); + + /* Get RTC clock configuration */ + HAL_RCCEx_GetPeriphCLKConfig(&PeriphClkInitStruct); + + /*In case of RTC clock already enable, make sure it's the good one */ +#ifdef RTC_CLOCK_SOURCE_LSE + if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_LSE) && (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != 0x00u)) +#elif defined (RTC_CLOCK_SOURCE_LSI) + if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_LSI) && (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != 0x00u)) +#elif defined (RTC_CLOCK_SOURCE_HSE) + if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_HSE_DIV32) && (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0x00u)) +#else +#error Please select the RTC Clock source +#endif + { + /* Do nothing */ + } + else + { +#ifdef RTC_CLOCK_SOURCE_LSE + /* Configure LSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; +#elif defined (RTC_CLOCK_SOURCE_LSI) + /* Configure LSI as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; +#elif defined (RTC_CLOCK_SOURCE_HSE) + /* Configure HSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32; +#endif + + /* COnfigure oscillator */ + status = HAL_RCC_OscConfig(&RCC_OscInitStruct); + if(status == HAL_OK) + { + /* Configure RTC clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; + status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Enable RTC Clock */ + if(status == HAL_OK) + { + __HAL_RCC_RTC_ENABLE(); + } + } + } + + /* If RTC Clock configuration is ok */ + if(status == HAL_OK) + { + /* No care of RTC init parameter here. Only needed if RTC is being used + for other features in same time: calendar, alarm, timestamp, etc... */ + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; + hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; + hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; + hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; + hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + status = HAL_RTC_Init(&hRTC_Handle); + + if(status == HAL_OK) + { + /* The time base should be of (uint32_t)uwTickFreq) ms. Tick counter + is incremented eachtime wakeup time reaches zero. Wakeup timer is + clocked on RTCCLK divided by 2. So downcounting counter has to be + set to (RTCCLK / 2) / (1000 / (uint32_t)uwTickFreq)) minus 1 */ +#ifdef RTC_CLOCK_SOURCE_LSE + wucounter = LSE_VALUE; +#elif defined (RTC_CLOCK_SOURCE_LSI) + wucounter = LSI_VALUE; +#elif defined (RTC_CLOCK_SOURCE_HSE) + /* HSE input clock to RTC is divided by 32 */ + wucounter = (HSE_VALUE >> 5); +#endif + wucounter = ((wucounter >> 1) / (1000U / (uint32_t)uwTickFreq)) -1u; + status = HAL_RTCEx_SetWakeUpTimer_IT(&hRTC_Handle, wucounter, RTC_WAKEUPCLOCK_RTCCLK_DIV2); + + if(status == HAL_OK) + { + /* Enable the RTC global Interrupt */ + + HAL_NVIC_EnableIRQ(RTC_TAMP_IRQn); + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(RTC_TAMP_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + } + } + } + else + { + status = HAL_ERROR; + } + return status; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling RTC_TAMP interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Disable WAKE UP TIMER Interrupt */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling RTC_TAMP interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Enable WAKE UP TIMER interrupt */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Wake Up Timer Event Callback in non blocking mode + * @note This function is called when RTC_TAMP interrupt took place, inside + * RTC_TAMP_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param hrtc : RTC handle + * @retval None + */ +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +{ + HAL_IncTick(); +} + +/** + * @brief This function handles RTC WAKE UP TIMER interrupt request. + * @retval None + */ +void RTC_TAMP_IRQHandler(void) +{ + HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); +} + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_tim_template.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_tim_template.c new file mode 100644 index 0000000..0eae5b0 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_timebase_tim_template.c @@ -0,0 +1,211 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_timebase_tim_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware TIM Template. + * + * This file overrides the native HAL time base functions (defined as weak) + * the TIM time base: + * + Initializes the TIM peripheral to generate a Period elapsed Event each 1ms + * + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32g0xx_hal_timebase_tim.c' + (#) Add this file and the TIM HAL driver files to your project and make sure + HAL_TIM_MODULE_ENABLED is defined in stm32g0xx_hal_conf.h + + [..] + (@) The application needs to ensure that the time base is always set to 1 millisecond + to have correct HAL operation. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL_TimeBase_TIM + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +TIM_HandleTypeDef TimHandle = {.Init = {0}}; + +/* Private function prototypes -----------------------------------------------*/ +void TIM14_IRQHandler(void); +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the TIM14 as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program + * after reset by HAL_Init() or at any time when clock is configured, + * by HAL_RCC_ClockConfig(). + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + RCC_ClkInitTypeDef clkconfig; + uint32_t uwTimclock; + uint32_t uwAPB1Prescaler; + uint32_t uwPrescalerValue; + uint32_t pFLatency; + HAL_StatusTypeDef status = HAL_OK; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /* Enable TIM14 clock */ + __HAL_RCC_TIM14_CLK_ENABLE(); + + /* Get clock configuration */ + HAL_RCC_GetClockConfig(&clkconfig, &pFLatency); + + /* Get APB1 prescaler */ + uwAPB1Prescaler = clkconfig.APB1CLKDivider; + + /* Compute TIM14 clock */ + if (uwAPB1Prescaler == RCC_HCLK_DIV1) + { + uwTimclock = HAL_RCC_GetPCLK1Freq(); + } + else + { + uwTimclock = 2U*HAL_RCC_GetPCLK1Freq(); + } + + /* Compute the prescaler value to have TIM14 counter clock equal to 1MHz */ + uwPrescalerValue = (uint32_t)((uwTimclock / 1000000U) - 1U); + + /* Initialize TIM14 */ + TimHandle.Instance = TIM14; + + /* Initialize TIMx peripheral as follow: + + Period = [(TIM14CLK/uwTickFreq) - 1]. to have a (1/uwTickFreq) s time base. + + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock. + + ClockDivision = 0 + + Counter direction = Up + */ + TimHandle.Init.Period = (1000000U / (1000U / (uint32_t)uwTickFreq)) - 1U; + TimHandle.Init.Prescaler = uwPrescalerValue; + TimHandle.Init.ClockDivision = 0U; + TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&TimHandle) == HAL_OK) + { + /* Start the TIM time Base generation in interrupt mode */ + if (HAL_TIM_Base_Start_IT(&TimHandle) == HAL_OK) + { + /* Enable the TIM14 global Interrupt */ + HAL_NVIC_EnableIRQ(TIM14_IRQn); + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + /*Configure the TIM14 IRQ priority */ + HAL_NVIC_SetPriority(TIM14_IRQn, TickPriority,0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling TIM14 update interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable TIM14 update interrupt */ + __HAL_TIM_DISABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by enabling TIM14 update interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Enable TIM14 update interrupt */ + __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Period elapsed callback in non blocking mode + * @note This function is called when TIM14 interrupt took place, inside + * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + HAL_IncTick(); +} + +/** + * @brief This function handles TIM interrupt request. + * @retval None + */ +void TIM14_IRQHandler(void) +{ + HAL_TIM_IRQHandler(&TimHandle); +} + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c new file mode 100644 index 0000000..a152e73 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c @@ -0,0 +1,4624 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_UART_RegisterCallback() to register a user callback. + Function @ref HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_UART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively @ref HAL_UART_RegisterRxEventCallback() , @ref HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_UART_Init() + and @ref HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_UART_Init() and @ref HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_UART_RegisterCallback() before calling @ref HAL_UART_DeInit() + or @ref HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8| \ + USART_CR1_FIFOEN )) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT| \ + USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used instead of the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + __HAL_LOCK(huart); + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + __HAL_UNLOCK(huart); + + /* Enable the TX FIFO threshold interrupt */ + SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the Transmit Data Register Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return(UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + __HAL_UNLOCK(huart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return(UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + __HAL_LOCK(huart); + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + &&((isrflags & USART_ISR_IDLE) != 0U) + &&((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ( (nb_remaining_rx_data > 0U) + &&(nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ( (huart->RxXferCount > 0U) + &&(nb_rx_data > 0U) ) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif + } + return; + } + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t lpuart_ker_ck_pres; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + tmpreg |= (uint32_t)huart->FifoMode; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* If proper clock source reported */ + if (pclk != 0U) + { + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint16_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint16_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Handle UART Communication Timeout. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + + if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, TXFT interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize/2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c new file mode 100644 index 0000000..f9991ef --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c @@ -0,0 +1,1059 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_IT(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data copy from RDR will be + handled by DMA from a uint16_t frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_usart.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_usart.c new file mode 100644 index 0000000..b36423a --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_usart.c @@ -0,0 +1,3790 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_usart.c + * @author MCD Application Team + * @brief USART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter + * Peripheral (USART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The USART HAL driver can be used as follows: + + (#) Declare a USART_HandleTypeDef handle structure (eg. USART_HandleTypeDef husart). + (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure these USART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(), + HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) USART interrupts handling: + -@@- The specific USART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process. + (++) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() + HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode + (Receiver/Transmitter) in the husart handle Init structure. + + (#) Initialize the USART registers by calling the HAL_USART_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_USART_MspInit(&husart) API. + + [..] + (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's + HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and + HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_USART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_USART_RegisterCallback() to register a user callback. + Function @ref HAL_USART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_USART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + + [..] + By default, after the @ref HAL_USART_Init() and when the state is HAL_USART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_USART_TxCpltCallback(), @ref HAL_USART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_USART_Init() + and @ref HAL_USART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_USART_Init() and @ref HAL_USART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_USART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_USART_STATE_READY or HAL_USART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_USART_RegisterCallback() before calling @ref HAL_USART_DeInit() + or @ref HAL_USART_Init() function. + + [..] + When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup USART USART + * @brief HAL USART Synchronous module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup USART_Private_Constants USART Private Constants + * @{ + */ +#define USART_DUMMY_DATA ((uint16_t) 0xFFFF) /*!< USART transmitted dummy data */ +#define USART_TEACK_REACK_TIMEOUT 1000U /*!< USART TX or RX enable acknowledge time-out value */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8 | \ + USART_CR1_FIFOEN )) /*!< USART CR1 fields of parameters set by USART_SetConfig API */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | \ + USART_CR2_LBCL | USART_CR2_STOP | USART_CR2_SLVEN | \ + USART_CR2_DIS_NSS)) /*!< USART CR2 fields of parameters set by USART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART or USART CR3 fields of parameters set by USART_SetConfig API */ + +#define USART_BRR_MIN 0x10U /* USART BRR minimum authorized value */ +#define USART_BRR_MAX 0xFFFFU /* USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup USART_Private_Functions + * @{ + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +static void USART_EndTransfer(USART_HandleTypeDef *husart); +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAError(DMA_HandleTypeDef *hdma); +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in asynchronous and in synchronous modes. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) USART polarity + (++) USART phase + (++) USART LastBit + (++) Receiver/transmitter modes + + [..] + The HAL_USART_Init() function follows the USART synchronous configuration + procedure (details for the procedure are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible USART formats are listed in the + following table. + + Table 1. USART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | USART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the USART mode according to the specified + * parameters in the USART_InitTypeDef and initialize the associated handle. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + if (husart->State == HAL_USART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + husart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + USART_InitCallbacksToDefault(husart); + + if (husart->MspInitCallback == NULL) + { + husart->MspInitCallback = HAL_USART_MspInit; + } + + /* Init the low level hardware */ + husart->MspInitCallback(husart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_USART_MspInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + husart->State = HAL_USART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_USART_DISABLE(husart); + + /* Set the Usart Communication parameters */ + if (USART_SetConfig(husart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/ + husart->Instance->CR2 &= ~USART_CR2_LINEN; + husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN); + + /* Enable the Peripheral */ + __HAL_USART_ENABLE(husart); + + /* TEACK and/or REACK to check before moving husart->State to Ready */ + return (USART_CheckIdleState(husart)); +} + +/** + * @brief DeInitialize the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + husart->State = HAL_USART_STATE_BUSY; + + husart->Instance->CR1 = 0x0U; + husart->Instance->CR2 = 0x0U; + husart->Instance->CR3 = 0x0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + if (husart->MspDeInitCallback == NULL) + { + husart->MspDeInitCallback = HAL_USART_MspDeInit; + } + /* DeInit the low level hardware */ + husart->MspDeInitCallback(husart); +#else + /* DeInit the low level hardware */ + HAL_USART_MspDeInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Initialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User USART Callback + * To be used instead of the weak predefined callback + * @param husart usart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status ++ */ +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(husart); + + if (husart->State == HAL_USART_STATE_READY) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = pCallback; + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = pCallback; + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = pCallback; + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = pCallback; + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = pCallback; + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = pCallback; + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = pCallback; + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = pCallback; + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (husart->State == HAL_USART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(husart); + + return status; +} + +/** + * @brief Unregister an USART Callback + * USART callback is redirected to the weak predefined callback + * @param husart usart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(husart); + + if (HAL_USART_STATE_READY == husart->State) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_USART_STATE_RESET == husart->State) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(husart); + + return status; +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group2 IO operation functions + * @brief USART Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART synchronous + data transfers. + + [..] The USART supports master mode only: it cannot receive or send data related to an input + clock (SCLK is always an output). + + [..] + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated USART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (++) HAL_USART_Transmit() in simplex mode + (++) HAL_USART_Receive() in full duplex receive only + (++) HAL_USART_TransmitReceive() in full duplex mode + + (#) Non-Blocking mode API's with Interrupt are : + (++) HAL_USART_Transmit_IT() in simplex mode + (++) HAL_USART_Receive_IT() in full duplex receive only + (++) HAL_USART_TransmitReceive_IT() in full duplex mode + (++) HAL_USART_IRQHandler() + + (#) No-Blocking mode API's with DMA are : + (++) HAL_USART_Transmit_DMA() in simplex mode + (++) HAL_USART_Receive_DMA() in full duplex receive only + (++) HAL_USART_TransmitReceive_DMA() in full duplex mode + (++) HAL_USART_DMAPause() + (++) HAL_USART_DMAResume() + (++) HAL_USART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (++) HAL_USART_TxCpltCallback() + (++) HAL_USART_RxCpltCallback() + (++) HAL_USART_TxHalfCpltCallback() + (++) HAL_USART_RxHalfCpltCallback() + (++) HAL_USART_ErrorCallback() + (++) HAL_USART_TxRxCpltCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_USART_Abort() + (++) HAL_USART_Abort_IT() + + (#) For Abort services based on interrupts (HAL_USART_Abort_IT), a Abort Complete Callbacks is provided: + (++) HAL_USART_AbortCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, + and HAL_USART_ErrorCallback() user callback is executed. Transfer is kept ongoing on USART side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_USART_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Simplex send an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *ptxdata8bits; + uint16_t *ptxdata16bits; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pTxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + ptxdata8bits = NULL; + ptxdata16bits = (uint16_t *) pTxData; + } + else + { + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + } + + /* Check the remaining data to be sent */ + while (husart->TxXferCount > 0U) + { + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & 0x01FFU); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & 0xFFU); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear Transmission Complete Flag */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + + /* At end of Tx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + prxdata16bits = NULL; + } + + /* as long as data have to be received */ + while (husart->RxXferCount > 0U) + { + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Wait until TXE flag is set to send dummy byte in order to generate the + * clock for the slave to send data. + * Whatever the frame length (7, 8 or 9-bit long), the same dummy value + * can be written for all the cases. */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x0FF); + } + + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + + } + + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* At end of Rx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + uint8_t *ptxdata8bits; + uint16_t *ptxdata16bits; + uint16_t uhMask; + uint16_t rxdatacount; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + ptxdata8bits = NULL; + ptxdata16bits = (uint16_t *) pTxData; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + prxdata16bits = NULL; + } + + if ((husart->TxXferCount == 0x01U) || (husart->SlaveMode == USART_SLAVEMODE_ENABLE)) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + /* Check the remain data to be sent */ + /* rxdatacount is a temporary variable for MISRAC2012-Rule-13.5 */ + rxdatacount = husart->RxXferCount; + while ((husart->TxXferCount > 0U) || (rxdatacount > 0U)) + { + if (husart->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (husart->RxXferCount > 0U) + { + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + } + rxdatacount = husart->RxXferCount; + } + + /* At end of TxRx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) +{ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->TxISR = NULL; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* The USART Error Interrupts: (Frame error, noise error, overrun error) + are not managed by the USART Transmit Process to avoid the overrun interrupt + when the usart mode is configured for transmit and receive "USART_MODE_TX_RX" + to benefit for the frame error and noise interrupts the usart mode should be + configured only for transmit "USART_MODE_TX" */ + + /* Configure Tx interrupt processing */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the TX FIFO threshold interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXFT); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + uint16_t nb_dummy_data; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->RxISR = NULL; + + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error and Data Register not empty Interrupts */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Send dummy data in order to generate the clock for the Slave to send the next data. + When FIFO mode is disabled only one data must be transferred. + When FIFO mode is enabled data must be transmitted until the RX FIFO reaches its threshold. + */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + for (nb_dummy_data = husart->NbRxDataToProcess ; nb_dummy_data > 0U ; nb_dummy_data--) + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + else + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + /* Configure TxRx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART Parity Error interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the TX and RX FIFO Threshold interrupts */ + SET_BIT(husart->Instance->CR3, (USART_CR3_TXFTIE | USART_CR3_RXFTIE)); + } + else + { + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART Parity Error and USART Data Register not empty Interrupts */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + if (husart->hdmatx != NULL) + { + /* Set the USART DMA transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the DMA error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Enable the USART transmit DMA channel */ + tmp = (uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + + if (status == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the USART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t *tmp = (uint32_t *)&pRxData; + + /* Check that a Rx process is not already ongoing */ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pRxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size); + } + + if ((status == HAL_OK) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Enable the USART transmit DMA channel: the transmit channel is used in order + to generate in the non-blocking mode the clock to the slave device, + this mode isn't a simplex receive mode but a full-duplex receive mode */ + + /* Set the USART DMA Tx Complete and Error callback to Null */ + if (husart->hdmatx != NULL) + { + husart->hdmatx->XferErrorCallback = NULL; + husart->hdmatx->XferHalfCpltCallback = NULL; + husart->hdmatx->XferCpltCallback = NULL; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. + * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received/sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef status; + uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data copy to/from TDR/RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + if ((husart->hdmarx != NULL) && (husart->hdmatx != NULL)) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Tx transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the USART DMA Tx transfer error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + tmp = (uint32_t *)&pRxData; + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size); + + /* Enable the USART transmit DMA channel */ + if (status == HAL_OK) + { + tmp = (uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + else + { + status = HAL_ERROR; + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) && + (state == HAL_USART_STATE_BUSY_TX)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the USART DMA Rx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if (state == HAL_USART_STATE_BUSY_TX) + { + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART DMA Rx request before the DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() / + HAL_USART_TxHalfCpltCallback / HAL_USART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Disable the USART Tx/Rx DMA requests */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA tx channel */ + if (husart->hdmatx != NULL) + { + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + /* Abort the USART DMA rx channel */ + if (husart->hdmarx != NULL) + { + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + USART_EndTransfer(husart); + husart->State = HAL_USART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* Disable the USART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmatx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the USART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If DMA Tx and/or DMA Rx Handles are associated to USART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (husart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + husart->hdmatx->XferAbortCallback = USART_DMATxAbortCallback; + } + else + { + husart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (husart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + husart->hdmarx->XferAbortCallback = USART_DMARxAbortCallback; + } + else + { + husart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the USART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at USART level */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmatx != NULL) + { + /* USART Tx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(husart->hdmatx) != HAL_OK) + { + husart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the USART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmarx != NULL) + { + /* USART Rx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + husart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle USART interrupt request. + * @param husart USART handle. + * @retval None + */ +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart) +{ + uint32_t isrflags = READ_REG(husart->Instance->ISR); + uint32_t cr1its = READ_REG(husart->Instance->CR1); + uint32_t cr3its = READ_REG(husart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_UDR)); + if (errorflags == 0U) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && (((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* USART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_PEF); + + husart->ErrorCode |= HAL_USART_ERROR_PE; + } + + /* USART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_FEF); + + husart->ErrorCode |= HAL_USART_ERROR_FE; + } + + /* USART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_NEF); + + husart->ErrorCode |= HAL_USART_ERROR_NE; + } + + /* USART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF); + + husart->ErrorCode |= HAL_USART_ERROR_ORE; + } + + /* USART SPI slave underrun error interrupt occurred -------------------------*/ + if (((isrflags & USART_ISR_UDR) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + /* Ignore SPI slave underrun errors when reception is going on */ + if (husart->State == HAL_USART_STATE_BUSY_RX) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + return; + } + else + { + __HAL_USART_CLEAR_UDRFLAG(husart); + husart->ErrorCode |= HAL_USART_ERROR_UDR; + } + } + + /* Call USART Error Call back function if need be --------------------------*/ + if (husart->ErrorCode != HAL_USART_ERROR_NONE) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = husart->ErrorCode & HAL_USART_ERROR_ORE; + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) || + (errorcode != 0U)) + { + /* Blocking error : transfer is aborted + Set the USART state ready to be able to start again the process, + Disable Interrupts, and disable DMA requests, if ongoing */ + USART_EndTransfer(husart); + + /* Disable the USART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR | USART_CR3_DMAR); + + /* Abort the USART DMA Tx channel */ + if (husart->hdmatx != NULL) + { + /* Set the USART Tx DMA Abort callback to NULL : no callback + executed at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA TX */ + (void)HAL_DMA_Abort_IT(husart->hdmatx); + } + + /* Abort the USART DMA Rx channel */ + if (husart->hdmarx != NULL) + { + /* Set the USART Rx DMA Abort callback : + will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + /* Call Directly husart->hdmarx->XferAbortCallback function in case of error */ + husart->hdmarx->XferAbortCallback(husart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + + /* USART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (husart->TxISR != NULL) + { + husart->TxISR(husart); + } + return; + } + + /* USART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + USART_EndTransmit_IT(husart); + return; + } + + /* USART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + husart->TxFifoEmptyCallback(husart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_USARTEx_TxFifoEmptyCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } + + /* USART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + husart->RxFifoFullCallback(husart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_USARTEx_RxFifoFullCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx/Rx Transfers completed callback for the non-blocking process. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief USART error callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief USART Abort Complete callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief USART Peripheral State and Error functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the USART handle state + (+) Return the USART handle error code + +@endverbatim + * @{ + */ + + +/** + * @brief Return the USART handle state. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle state + */ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart) +{ + return husart->State; +} + +/** + * @brief Return the USART error code. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle Error Code + */ +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart) +{ + return husart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions USART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param husart USART handle. + * @retval none + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart) +{ + /* Init the USART Callback settings */ + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @brief End ongoing transfer on USART peripheral (following error detection or Transfer completion). + * @param husart USART handle. + * @retval None + */ +static void USART_EndTransfer(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* At end of process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; +} + +/** + * @brief DMA USART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->TxXferCount = 0U; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + } + /* DMA Circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_TX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half Complete Callback */ + husart->TxHalfCpltCallback(husart); +#else + /* Call legacy weak Tx Half Complete Callback */ + HAL_USART_TxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit + in USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + /* similarly, disable the DMA TX transfer that was started to provide the + clock to the slave device */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + husart->State = HAL_USART_STATE_READY; + } + /* DMA circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Half Complete Callback */ + husart->RxHalfCpltCallback(husart); +#else + /* Call legacy weak Rx Half Complete Callback */ + HAL_USART_RxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + USART_EndTransfer(husart); + + husart->ErrorCode |= HAL_USART_ERROR_DMA; + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmarx != NULL) + { + if (husart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} + + +/** + * @brief DMA USART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmatx != NULL) + { + if (husart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + + +/** + * @brief Handle USART Communication Timeout. + * @param husart USART handle. + * @param Flag Specifies the USART flag to check. + * @param Status the Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart) +{ + uint32_t tmpreg; + USART_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + uint16_t brrtemp; + uint32_t usartdiv = 0x00000000; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); + assert_param(IS_USART_PHASE(husart->Init.CLKPhase)); + assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit)); + assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate)); + assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength)); + assert_param(IS_USART_STOPBITS(husart->Init.StopBits)); + assert_param(IS_USART_PARITY(husart->Init.Parity)); + assert_param(IS_USART_MODE(husart->Init.Mode)); + assert_param(IS_USART_PRESCALER(husart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE and RE bits and configure + * the USART Word Length, Parity and Mode: + * set the M bits according to husart->Init.WordLength value + * set PCE and PS bits according to husart->Init.Parity value + * set TE and RE bits according to husart->Init.Mode value + * force OVER8 to 1 to allow to reach the maximum speed (Fclock/8) */ + tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8; + MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*---------------------------- USART CR2 Configuration ---------------------*/ + /* Clear and configure the USART Clock, CPOL, CPHA, LBCL STOP and SLVEN bits: + * set CPOL bit according to husart->Init.CLKPolarity value + * set CPHA bit according to husart->Init.CLKPhase value + * set LBCL bit according to husart->Init.CLKLastBit value (used in SPI master mode only) + * set STOP[13:12] bits according to husart->Init.StopBits value */ + tmpreg = (uint32_t)(USART_CLOCK_ENABLE); + tmpreg |= (uint32_t)husart->Init.CLKLastBit; + tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase); + tmpreg |= (uint32_t)husart->Init.StopBits; + MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - USART Clock Prescaler : set PRESCALER according to husart->Init.ClockPrescaler value */ + MODIFY_REG(husart->Instance->PRESC, USART_PRESC_PRESCALER, husart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + /* BRR is filled-up according to OVER8 bit setting which is forced to 1 */ + USART_GETCLOCKSOURCE(husart, clocksource); + + switch (clocksource) + { + case USART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_HSI: + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(HSI_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_LSE: + usartdiv = (uint32_t)(USART_DIV_SAMPLING8((uint32_t)LSE_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 and smaller than or equal to ffff */ + if ((usartdiv >= USART_BRR_MIN) && (usartdiv <= USART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + husart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + husart->RxISR = NULL; + husart->TxISR = NULL; + + return ret; +} + +/** + * @brief Check the USART Idle State. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart) +{ + uint32_t tickstart; + + /* Initialize the USART ErrorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the USART state*/ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t *tmp; + + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + tmp = (uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + tmp = (uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wraps up transmission in non-blocking mode. + * @param husart Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart) +{ + /* Disable the USART Transmit Complete Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TC); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + /* Clear TxISR function pointer */ + husart->TxISR = NULL; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Tx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if (husart->RxXferCount == 0U) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Rx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_8BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_16BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_usart_ex.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_usart_ex.c new file mode 100644 index 0000000..d9c7419 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_usart_ex.c @@ -0,0 +1,538 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_usart_ex.c + * @author MCD Application Team + * @brief Extended USART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Synchronous Receiver Transmitter Peripheral (USART). + * + Peripheral Control functions + * + * + @verbatim + ============================================================================== + ##### USART peripheral extended features ##### + ============================================================================== + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When USART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + (#) Slave mode enabling/disabling and NSS pin configuration. + + -@- When USART operates in Slave mode, Slave mode must be enabled prior + starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup USARTEx USARTEx + * @brief USART Extended HAL module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Constants USARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup USARTEx_Private_Functions USARTEx Private Functions + * @{ + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USARTEx_Exported_Functions USARTEx Exported Functions + * @{ + */ + +/** @defgroup USARTEx_Exported_Functions_Group1 IO operation functions + * @brief Extended USART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (+) HAL_USARTEx_RxFifoFullCallback() + (+) HAL_USARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief USART RX Fifo full callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief USART TX Fifo empty callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USARTEx_Exported_Functions_Group2 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_USARTEx_EnableSPISlaveMode() API enables the SPI slave mode + (+) HAL_USARTEx_DisableSPISlaveMode() API disables the SPI slave mode + (+) HAL_USARTEx_ConfigNSS API configures the Slave Select input pin (NSS) + (+) HAL_USARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_USARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_USARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_USARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + +@endverbatim + * @{ + */ + +/** + * @brief Enable the SPI slave mode. + * @note When the USART operates in SPI slave mode, it handles data flow using + * the serial interface clock derived from the external SCLK signal + * provided by the external master SPI device. + * @note In SPI slave mode, the USART must be enabled before starting the master + * communications (or between frames while the clock is stable). Otherwise, + * if the USART slave is enabled while the master is in the middle of a + * frame, it will become desynchronized with the master. + * @note The data register of the slave needs to be ready before the first edge + * of the communication clock or before the end of the ongoing communication, + * otherwise the SPI slave will transmit zeros. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* In SPI slave mode mode, the following bits must be kept cleared: + - LINEN and CLKEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(husart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Enable SPI slave mode */ + SET_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_ENABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Enable USART */ + __HAL_USART_ENABLE(husart); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the SPI slave mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Disable SPI slave mode */ + CLEAR_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_DISABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Configure the Slave Select input pin (NSS). + * @note Software NSS management: SPI slave will always be selected and NSS + * input pin will be ignored. + * @note Hardware NSS management: the SPI slave selection depends on NSS + * input pin. The slave is selected when NSS is low and deselected when + * NSS is high. + * @param husart USART handle. + * @param NSSConfig NSS configuration. + * This parameter can be one of the following values: + * @arg @ref USART_NSS_HARD + * @arg @ref USART_NSS_SOFT + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + assert_param(IS_USART_NSS(NSSConfig)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Program DIS_NSS bit in the USART_CR2 register */ + MODIFY_REG(husart->Instance->CR2, USART_CR2_DIS_NSS, NSSConfig); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_ENABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_DISABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param husart USART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_TXFIFO_THRESHOLD_1_8 + * @arg @ref USART_TXFIFO_THRESHOLD_1_4 + * @arg @ref USART_TXFIFO_THRESHOLD_1_2 + * @arg @ref USART_TXFIFO_THRESHOLD_3_4 + * @arg @ref USART_TXFIFO_THRESHOLD_7_8 + * @arg @ref USART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update TX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param husart USART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_RXFIFO_THRESHOLD_1_8 + * @arg @ref USART_RXFIFO_THRESHOLD_1_4 + * @arg @ref USART_RXFIFO_THRESHOLD_1_2 + * @arg @ref USART_RXFIFO_THRESHOLD_3_4 + * @arg @ref USART_RXFIFO_THRESHOLD_7_8 + * @arg @ref USART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update RX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup USARTEx_Private_Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param husart USART handle. + * @retval None + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (husart->FifoMode == USART_FIFOMODE_DISABLE) + { + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos) & 0xFFU); + tx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos) & 0xFFU); + husart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold]; + husart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_wwdg.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_wwdg.c new file mode 100644 index 0000000..9ca939c --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_wwdg.c @@ -0,0 +1,422 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_wwdg.c + * @author MCD Application Team + * @brief WWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Window Watchdog (WWDG) peripheral: + * + Initialization and Configuration functions + * + IO operation functions + @verbatim + ============================================================================== + ##### WWDG Specific features ##### + ============================================================================== + [..] + Once enabled the WWDG generates a system reset on expiry of a programmed + time period, unless the program refreshes the counter (T[6;0] downcounter) + before reaching 0x3F value (i.e. a reset is generated when the counter + value rolls down from 0x40 to 0x3F). + + (+) An MCU reset is also generated if the counter value is refreshed + before the counter has reached the refresh window value. This + implies that the counter must be refreshed in a limited window. + (+) Once enabled the WWDG cannot be disabled except by a system reset. + (+) If required by application, an Early Wakeup Interrupt can be triggered + in order to be warned before WWDG expiration. The Early Wakeup Interrupt + (EWI) can be used if specific safety operations or data logging must + be performed before the actual reset is generated. When the downcounter + reaches 0x40, interrupt occurs. This mechanism requires WWDG interrupt + line to be enabled in NVIC. Once enabled, EWI interrupt cannot be + disabled except by a system reset. + (+) WWDGRST flag in RCC CSR register can be used to inform when a WWDG + reset occurs. + (+) The WWDG counter input clock is derived from the APB clock divided + by a programmable prescaler. + (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler) + (+) WWDG timeout (mS) = 1000 * (T[5;0] + 1) / WWDG clock (Hz) + where T[5;0] are the lowest 6 bits of Counter. + (+) WWDG Counter refresh is allowed between the following limits : + (++) min time (mS) = 1000 * (Counter - Window) / WWDG clock + (++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock + (+) Typical values: + (++) Counter min (T[5;0] = 0x00) at 64 MHz (PCLK1) with zero prescaler: + max timeout before reset: approximately 64µs + (++) Counter max (T[5;0] = 0x3F) at 64 MHz (PCLK1) with prescaler + dividing by 128: + max timeout before reset: approximately 524.28ms + + ##### How to use this driver ##### + ============================================================================== + + *** Common driver usage *** + =========================== + + [..] + (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). + (+) Configure the WWDG prescaler, refresh window value, counter value and early + interrupt status using HAL_WWDG_Init() function. This will automatically + enable WWDG and start its downcounter. Time reference can be taken from + function exit. Care must be taken to provide a counter value + greater than 0x40 to prevent generation of immediate reset. + (+) If the Early Wakeup Interrupt (EWI) feature is enabled, an interrupt is + generated when the counter reaches 0x40. When HAL_WWDG_IRQHandler is + triggered by the interrupt service routine, flag will be automatically + cleared and HAL_WWDG_WakeupCallback user callback will be executed. User + can add his own code by customization of callback HAL_WWDG_WakeupCallback. + (+) Then the application program must refresh the WWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_WWDG_Refresh() function. This operation must occur only when + the counter is lower than the refresh window value already programmed. + + *** Callback registration *** + ============================= + + [..] + The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows + the user to configure dynamically the driver callbacks. Use Functions + HAL_WWDG_RegisterCallback() to register a user callback. + + (+) Function HAL_WWDG_RegisterCallback() allows to register following + callbacks: + (++) EwiCallback : callback for Early WakeUp Interrupt. + (++) MspInitCallback : WWDG MspInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + (+) Use function HAL_WWDG_UnRegisterCallback() to reset a callback to + the default weak (surcharged) function. HAL_WWDG_UnRegisterCallback() + takes as parameters the HAL peripheral handle and the Callback ID. + This function allows to reset following callbacks: + (++) EwiCallback : callback for Early WakeUp Interrupt. + (++) MspInitCallback : WWDG MspInit. + + [..] + When calling HAL_WWDG_Init function, callbacks are reset to the + corresponding legacy weak (surcharged) functions: + HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have + not been registered before. + + [..] + When compilation define USE_HAL_WWDG_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + *** WWDG HAL driver macros list *** + =================================== + [..] + Below the list of available macros in WWDG HAL driver. + (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral + (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status + (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags + (+) __HAL_WWDG_ENABLE_IT: Enable the WWDG early wakeup interrupt + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_WWDG_MODULE_ENABLED +/** @defgroup WWDG WWDG + * @brief WWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and start the WWDG according to the specified parameters + in the WWDG_InitTypeDef of associated handle. + (+) Initialize the WWDG MSP. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the WWDG according to the specified. + * parameters in the WWDG_InitTypeDef of associated handle. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) +{ + /* Check the WWDG handle allocation */ + if (hwwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); + assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler)); + assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); + assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); + assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode)); + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + /* Reset Callback pointers */ + if (hwwdg->EwiCallback == NULL) + { + hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; + } + + if (hwwdg->MspInitCallback == NULL) + { + hwwdg->MspInitCallback = HAL_WWDG_MspInit; + } + + /* Init the low level hardware */ + hwwdg->MspInitCallback(hwwdg); +#else + /* Init the low level hardware */ + HAL_WWDG_MspInit(hwwdg); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + + /* Set WWDG Counter */ + WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter)); + + /* Set WWDG Prescaler and Window */ + WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window)); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Initialize the WWDG MSP. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @note When rewriting this function in user file, mechanism may be added + * to avoid multiple initialize when HAL_WWDG_Init function is called + * again to change parameters. + * @retval None + */ +__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_MspInit could be implemented in the user file + */ +} + + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User WWDG Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hwwdg WWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + status = HAL_ERROR; + } + else + { + switch (CallbackID) + { + case HAL_WWDG_EWI_CB_ID: + hwwdg->EwiCallback = pCallback; + break; + + case HAL_WWDG_MSPINIT_CB_ID: + hwwdg->MspInitCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + + return status; +} + + +/** + * @brief Unregister a WWDG Callback + * WWDG Callback is redirected to the weak (surcharged) predefined callback + * @param hwwdg WWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_WWDG_EWI_CB_ID: + hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; + break; + + case HAL_WWDG_MSPINIT_CB_ID: + hwwdg->MspInitCallback = HAL_WWDG_MspInit; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Refresh the WWDG. + (+) Handle WWDG interrupt request and associated function callback. + +@endverbatim + * @{ + */ + +/** + * @brief Refresh the WWDG. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg) +{ + /* Write to WWDG CR the WWDG Counter value to refresh with */ + WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter)); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handle WWDG interrupt request. + * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations + * or data logging must be performed before the actual reset is generated. + * The EWI interrupt is enabled by calling HAL_WWDG_Init function with + * EWIMode set to WWDG_EWI_ENABLE. + * When the downcounter reaches the value 0x40, and EWI interrupt is + * generated and the corresponding Interrupt Service Routine (ISR) can + * be used to trigger specific actions (such as communications or data + * logging), before resetting the device. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg) +{ + /* Check if Early Wakeup Interrupt is enable */ + if (__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET) + { + /* Check if WWDG Early Wakeup Interrupt occurred */ + if (__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET) + { + /* Clear the WWDG Early Wakeup flag */ + __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF); + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + /* Early Wakeup registered callback */ + hwwdg->EwiCallback(hwwdg); +#else + /* Early Wakeup callback */ + HAL_WWDG_EarlyWakeupCallback(hwwdg); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + } + } +} + + +/** + * @brief WWDG Early Wakeup callback. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +__weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_EarlyWakeupCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_WWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c new file mode 100644 index 0000000..a5031d6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c @@ -0,0 +1,787 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_adc.c + * @author MCD Application Team + * @brief ADC LL module driver + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_adc.h" +#include "stm32g0xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @addtogroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup ADC_LL_Private_Constants + * @{ + */ + +/* Definitions of ADC hardware constraints delays */ +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values: */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Refer to @ref ADC_LL_EC_HW_DELAYS for description of ADC timeout */ +/* values definition. */ +/* Note: ADC timeout values are defined here in CPU cycles to be independent */ +/* of device clock setting. */ +/* In user application, ADC timeout values should be defined with */ +/* temporal values, in function of device clock settings. */ +/* Highest ratio CPU clock frequency vs ADC clock frequency: */ +/* - ADC clock from synchronous clock with AHB prescaler 512, */ +/* APB prescaler 16, ADC prescaler 4. */ +/* - ADC clock from asynchronous clock (HSI) with prescaler 1, */ +/* with highest ratio CPU clock frequency vs HSI clock frequency: */ +/* CPU clock frequency max 56MHz, HSI frequency 16MHz: ratio 4. */ +/* Unit: CPU cycles. */ +#define ADC_CLOCK_RATIO_VS_CPU_HIGHEST (512UL * 16UL * 4UL) +#define ADC_TIMEOUT_DISABLE_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +#define ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +/* Note: CCRDY handshake requires 1APB + 2 ADC + 3 APB cycles */ +/* after the channel configuration has been changed. */ +/* Driver timeout is approximated to 6 CPU cycles. */ +#define ADC_TIMEOUT_CCRDY_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 6UL) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup ADC_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* common to several ADC instances. */ +#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV6) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV8) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV10) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV12) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV16) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV32) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV64) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV128) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV256) \ + ) + +#define IS_LL_ADC_CLOCK_FREQ_MODE(__CLOCK_FREQ_MODE__) \ + (((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_HIGH) \ + || ((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_LOW) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC instance. */ +#define IS_LL_ADC_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC) \ + ) + +#define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ + (((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ + ) + +#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ + (((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ + || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ + ) + +#define IS_LL_ADC_LOW_POWER(__LOW_POWER__) \ + (((__LOW_POWER__) == LL_ADC_LP_MODE_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group regular */ +#if defined(TIM15) && defined(TIM6) && defined(TIM2) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM15_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#elif defined(TIM15) && defined(TIM6) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM15_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#elif defined(TIM2) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#else +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#endif + +#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ + (((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ + || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ + ) + +#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ + (((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ + ) + +#define IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(__REG_OVR_DATA_BEHAVIOR__) \ + (((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_PRESERVED) \ + || ((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_OVERWRITTEN) \ + ) + +#define IS_LL_ADC_REG_SEQ_MODE(__REG_SEQ_MODE__) \ + (((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_FIXED) \ + || ((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_CONFIGURABLE) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ + (((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ + (((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of all ADC instances belonging to + * the same ADC common instance to their default reset values. + * @note This function is performing a hard reset, using high level + * clock source RCC ADC reset. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) +{ + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + + /* Force reset of ADC clock (core clock) */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); + + /* Release reset of ADC clock (core clock) */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); + + return SUCCESS; +} + +/** + * @brief Initialize some features of ADC common parameters + * (all ADC instances belonging to the same ADC common instance) + * and multimode (for devices with several ADC instances available). + * @note The setting of ADC common parameters is conditioned to + * ADC instances state: + * All ADC instances belonging to the same ADC common instance + * must be disabled. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are initialized + * - ERROR: ADC common registers are not initialized + */ +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock)); + + /* Note: Hardware constraint (refer to description of functions */ + /* "LL_ADC_SetCommonXXX()": */ + /* On this STM32 series, setting of these features is conditioned to */ + /* ADC state: */ + /* All ADC instances of the ADC common group must be disabled. */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - common to several ADC */ + /* (all ADC instances belonging to the same ADC common instance) */ + /* - Set ADC clock (conversion clock) */ + LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock); + } + else + { + /* Initialization error: One or several ADC instances belonging to */ + /* the same ADC common instance are not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + /* Set ADC_CommonInitStruct fields to default values */ + /* Set fields of ADC common */ + /* (all ADC instances belonging to the same ADC common instance) */ + ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2; + +} + +/** + * @brief De-initialize registers of the selected ADC instance + * to their default reset values. + * @note To reset all ADC instances quickly (perform a hard reset), + * use function @ref LL_ADC_CommonDeInit(). + * @note If this functions returns error status, it means that ADC instance + * is in an unknown state. + * In this case, perform a hard reset using high level + * clock source RCC ADC reset. + * Refer to function @ref LL_ADC_CommonDeInit(). + * @param ADCx ADC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are de-initialized + * - ERROR: ADC registers are not de-initialized + */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) +{ + ErrorStatus status = SUCCESS; + + __IO uint32_t timeout_cpu_cycles = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + /* Disable ADC instance if not already disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 1UL) + { + /* Set ADC group regular trigger source to SW start to ensure to not */ + /* have an external trigger event occurring during the conversion stop */ + /* ADC disable process. */ + LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE); + + /* Stop potential ADC conversion on going on ADC group regular. */ + if (LL_ADC_REG_IsConversionOngoing(ADCx) != 0UL) + { + if (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 0UL) + { + LL_ADC_REG_StopConversion(ADCx); + } + } + + /* Wait for ADC conversions are effectively stopped */ + timeout_cpu_cycles = ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES; + while (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Disable the ADC instance */ + LL_ADC_Disable(ADCx); + + /* Wait for ADC instance is effectively disabled */ + timeout_cpu_cycles = ADC_TIMEOUT_DISABLE_CPU_CYCLES; + while (LL_ADC_IsDisableOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + } + + /* Check whether ADC state is compliant with expected state */ + if (READ_BIT(ADCx->CR, + (ADC_CR_ADSTP | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN) + ) + == 0UL) + { + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + CLEAR_BIT(ADCx->IER, + (LL_ADC_IT_ADRDY + | LL_ADC_IT_EOC + | LL_ADC_IT_EOS + | LL_ADC_IT_OVR + | LL_ADC_IT_EOSMP + | LL_ADC_IT_AWD1 + | LL_ADC_IT_AWD2 + | LL_ADC_IT_AWD3 + | LL_ADC_IT_EOCAL + | LL_ADC_IT_CCRDY + ) + ); + + /* Reset register ISR */ + SET_BIT(ADCx->ISR, + (LL_ADC_FLAG_ADRDY + | LL_ADC_FLAG_EOC + | LL_ADC_FLAG_EOS + | LL_ADC_FLAG_OVR + | LL_ADC_FLAG_EOSMP + | LL_ADC_FLAG_AWD1 + | LL_ADC_FLAG_AWD2 + | LL_ADC_FLAG_AWD3 + | LL_ADC_FLAG_EOCAL + | LL_ADC_FLAG_CCRDY + ) + ); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + CLEAR_BIT(ADCx->CR, ADC_CR_ADVREGEN); + + /* Reset register CFGR1 */ + CLEAR_BIT(ADCx->CFGR1, + (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN + | ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD + | ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES + | ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) + ); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + CLEAR_BIT(ADCx->CFGR2, + (ADC_CFGR2_CKMODE + | ADC_CFGR2_TOVS | ADC_CFGR2_OVSS | ADC_CFGR2_OVSR + | ADC_CFGR2_OVSE) + ); + + /* Reset register SMPR */ + CLEAR_BIT(ADCx->SMPR, ADC_SMPR_SMP1 | ADC_SMPR_SMP2 | ADC_SMPR_SMPSEL); + + /* Reset register TR1 */ + MODIFY_REG(ADCx->TR1, ADC_TR1_HT1 | ADC_TR1_LT1, ADC_TR1_HT1); + + /* Reset register TR2 */ + MODIFY_REG(ADCx->TR2, ADC_TR2_HT2 | ADC_TR2_LT2, ADC_TR2_HT2); + + /* Reset register TR3 */ + MODIFY_REG(ADCx->TR3, ADC_TR3_HT3 | ADC_TR3_LT3, ADC_TR3_HT3); + + /* Reset register CHSELR */ + CLEAR_BIT(ADCx->CHSELR, + (ADC_CHSELR_CHSEL18 | ADC_CHSELR_CHSEL17 | ADC_CHSELR_CHSEL16 + | ADC_CHSELR_CHSEL15 | ADC_CHSELR_CHSEL14 | ADC_CHSELR_CHSEL13 | ADC_CHSELR_CHSEL12 + | ADC_CHSELR_CHSEL11 | ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL9 | ADC_CHSELR_CHSEL8 + | ADC_CHSELR_CHSEL7 | ADC_CHSELR_CHSEL6 | ADC_CHSELR_CHSEL5 | ADC_CHSELR_CHSEL4 + | ADC_CHSELR_CHSEL3 | ADC_CHSELR_CHSEL2 | ADC_CHSELR_CHSEL1 | ADC_CHSELR_CHSEL0) + ); + + /* Wait for ADC channel configuration ready */ + timeout_cpu_cycles = ADC_TIMEOUT_CCRDY_CPU_CYCLES; + while (LL_ADC_IsActiveFlag_CCRDY(ADCx) == 0UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Clear flag ADC channel configuration ready */ + LL_ADC_ClearFlag_CCRDY(ADCx); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CALFACT */ + CLEAR_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT); + + } + else + { + /* ADC instance is in an unknown state */ + /* Need to performing a hard reset of ADC instance, using high level */ + /* clock source RCC ADC reset. */ + /* Caution: On this STM32 series, if several ADC instances are available */ + /* on the selected device, RCC ADC reset will reset */ + /* all ADC instances belonging to the common ADC instance. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, some other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + assert_param(IS_LL_ADC_CLOCK(ADC_InitStruct->Clock)); + assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); + assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); + assert_param(IS_LL_ADC_LOW_POWER(ADC_InitStruct->LowPowerMode)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC instance */ + /* - Set ADC data resolution */ + /* - Set ADC conversion data alignment */ + /* - Set ADC low power mode */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_RES + | ADC_CFGR1_ALIGN + | ADC_CFGR1_WAIT + | ADC_CFGR1_AUTOFF + , + ADC_InitStruct->Resolution + | ADC_InitStruct->DataAlignment + | ADC_InitStruct->LowPowerMode + ); + + MODIFY_REG(ADCx->CFGR2, + ADC_CFGR2_CKMODE + , + ADC_InitStruct->Clock + ); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_InitTypeDef field to default value. + * @param ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) +{ + /* Set ADC_InitStruct fields to default values */ + /* Set fields of ADC instance */ + ADC_InitStruct->Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; + ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; + ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; + ADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE; + +} + +/** + * @brief Initialize some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note Before using this function, ADC group regular sequencer + * must be configured: refer to function + * @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); + assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode)); + assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer)); + assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(ADC_REG_InitStruct->Overrun)); + + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); + } + + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); + + /* ADC group regular continuous mode and discontinuous mode */ + /* can not be enabled simultenaeously */ + assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) + || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); + } + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group regular */ + /* - Set ADC group regular trigger source */ + /* - Set ADC group regular sequencer length */ + /* - Set ADC group regular sequencer discontinuous mode */ + /* - Set ADC group regular continuous mode */ + /* - Set ADC group regular conversion data transfer: no transfer or */ + /* transfer by DMA, and DMA requests mode */ + /* - Set ADC group regular overrun behavior */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + /* Case of sequencer mode fixed + or sequencer length >= 2 ranks with sequencer mode fully configurable: + discontinuous mode configured */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | ADC_REG_InitStruct->SequencerDiscont + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } + else + { + /* Case of sequencer mode fully configurable + and sequencer length 1 rank (sequencer disabled): + discontinuous mode discarded (fixed to disable) */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | LL_ADC_REG_SEQ_DISCONT_DISABLE + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } + + /* Set ADC group regular sequencer length */ + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); + } + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + /* Set ADC_REG_InitStruct fields to default values */ + /* Set fields of ADC group regular */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; + ADC_REG_InitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; + ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; + ADC_REG_InitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; + ADC_REG_InitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; + ADC_REG_InitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_crs.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_crs.c new file mode 100644 index 0000000..9d6b455 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_crs.c @@ -0,0 +1,86 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_crs.h + * @author MCD Application Team + * @brief CRS LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_crs.h" +#include "stm32g0xx_ll_bus.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CRS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup CRS_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initializes CRS peripheral registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: CRS registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_CRS_DeInit(void) +{ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_CRS); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_CRS); + + return SUCCESS; +} + + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c new file mode 100644 index 0000000..b8e711b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c @@ -0,0 +1,369 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dma.c + * @author MCD Application Team + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_dma.h" +#include "stm32g0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ + ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) + +#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ + ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) + +#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ + ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) + +#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) + +#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) + +#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + +#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) ((__VALUE__) <= LL_DMAMUX_MAX_REQ) + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ + ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ + ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ + ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) + +#if defined(DMA2) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ + (((INSTANCE) == DMA2) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7)))) +#else +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#endif +#endif /* DMA2 */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_ALL + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are de-initialized + * - ERROR: DMA registers are not de-initialized + */ +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel) || (Channel == LL_DMA_CHANNEL_ALL)); + + if (Channel == LL_DMA_CHANNEL_ALL) + { + if (DMAx == DMA1) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1); + } +#if defined(DMA2) + else if (DMAx == DMA2) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2); + } +#endif + else + { + status = ERROR; + } + } + else + { + DMA_Channel_TypeDef *tmp; + + tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Disable the selected DMAx_Channely */ + CLEAR_BIT(tmp->CCR, DMA_CCR_EN); + + /* Reset DMAx_Channely control register */ + WRITE_REG(tmp->CCR, 0U); + + /* Reset DMAx_Channely remaining bytes register */ + WRITE_REG(tmp->CNDTR, 0U); + + /* Reset DMAx_Channely peripheral address register */ + WRITE_REG(tmp->CPAR, 0U); + + /* Reset DMAx_Channely memory address register */ + WRITE_REG(tmp->CMAR, 0U); + + /* Reset Request register field for DMAx Channel */ + LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMAMUX_REQ_MEM2MEM); + + if (Channel == LL_DMA_CHANNEL_1) + { + /* Reset interrupt pending bits for DMAx Channel1 */ + LL_DMA_ClearFlag_GI1(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_2) + { + /* Reset interrupt pending bits for DMAx Channel2 */ + LL_DMA_ClearFlag_GI2(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_3) + { + /* Reset interrupt pending bits for DMAx Channel3 */ + LL_DMA_ClearFlag_GI3(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_4) + { + /* Reset interrupt pending bits for DMAx Channel4 */ + LL_DMA_ClearFlag_GI4(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_5) + { + /* Reset interrupt pending bits for DMAx Channel5 */ + LL_DMA_ClearFlag_GI5(DMAx); + } +#if defined(DMA1_Channel6) + else if (Channel == LL_DMA_CHANNEL_6) + { + /* Reset interrupt pending bits for DMAx Channel6 */ + LL_DMA_ClearFlag_GI6(DMAx); + } +#endif +#if defined(DMA1_Channel7) + else if (Channel == LL_DMA_CHANNEL_7) + { + /* Reset interrupt pending bits for DMAx Channel7 */ + LL_DMA_ClearFlag_GI7(DMAx); + } +#endif + else + { + status = ERROR; + } + } + + return status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : + * @arg @ref __LL_DMA_GET_INSTANCE + * @arg @ref __LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); + assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); + assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); + assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); + assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); + assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + + /*---------------------------- DMAx CCR Configuration ------------------------ + * Configure DMAx_Channely: data transfer direction, data transfer mode, + * peripheral and memory increment mode, + * data size alignment and priority level with parameters : + * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits + * - Mode: DMA_CCR_CIRC bit + * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit + * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit + * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits + * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits + * - Priority: DMA_CCR_PL[1:0] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->PeriphOrM2MSrcIncMode | \ + DMA_InitStruct->MemoryOrM2MDstIncMode | \ + DMA_InitStruct->PeriphOrM2MSrcDataSize | \ + DMA_InitStruct->MemoryOrM2MDstDataSize | \ + DMA_InitStruct->Priority); + + /*-------------------------- DMAx CMAR Configuration ------------------------- + * Configure the memory or destination base address with parameter : + * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits + */ + LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); + + /*-------------------------- DMAx CPAR Configuration ------------------------- + * Configure the peripheral or source base address with parameter : + * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits + */ + LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); + + /*--------------------------- DMAx CNDTR Configuration ----------------------- + * Configure the peripheral base address with parameter : + * - NbData: DMA_CNDTR_NDT[15:0] bits + */ + LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); + + /*--------------------------- DMAMUXx CCR Configuration ---------------------- + * Configure the DMA request for DMA Channels on DMAMUX Channel x with parameter : + * - PeriphRequest: DMA_CxCR[7:0] bits + */ + LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; + DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; + DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct->NbData = 0x00000000U; + DMA_InitStruct->PeriphRequest = LL_DMAMUX_REQ_MEM2MEM; + DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_exti.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_exti.c new file mode 100644 index 0000000..5154021 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_exti.c @@ -0,0 +1,295 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_exti.c + * @author MCD Application Team + * @brief EXTI LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_exti.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Private_Macros + * @{ + */ + +#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U) +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_EXTI_LINE_32_63(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_32_63) == 0x00000000U) +#endif +#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \ + || ((__VALUE__) == LL_EXTI_MODE_EVENT) \ + || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT)) + + +#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the EXTI registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - 0x00: EXTI registers are de-initialized + */ +uint32_t LL_EXTI_DeInit(void) +{ + /* Interrupt mask register set to default reset values */ + LL_EXTI_WriteReg(IMR1, 0xFFF80000U); + /* Event mask register set to default reset values */ + LL_EXTI_WriteReg(EMR1, 0x00000000U); + /* Rising Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(RTSR1, 0x00000000U); + /* Falling Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(FTSR1, 0x00000000U); + /* Software interrupt event register set to default reset values */ + LL_EXTI_WriteReg(SWIER1, 0x00000000U); + /* Pending register set to default reset values */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) + LL_EXTI_WriteReg(RPR1, 0x0017FFFFU); + LL_EXTI_WriteReg(FPR1, 0x0017FFFFU); +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G061xx) || defined(STM32G051xx) + LL_EXTI_WriteReg(RPR1, 0x0007FFFFU); + LL_EXTI_WriteReg(FPR1, 0x0007FFFFU); +#elif defined(STM32G041xx) || defined(STM32G031xx) + LL_EXTI_WriteReg(RPR1, 0x0001FFFFU); + LL_EXTI_WriteReg(FPR1, 0x0001FFFFU); +#elif defined(STM32G0B0xx) || defined(STM32G070xx) || defined(STM32G050xx) || defined(STM32G030xx) + LL_EXTI_WriteReg(RPR1, 0x0000FFFFU); + LL_EXTI_WriteReg(FPR1, 0x0000FFFFU); +#endif + +#if defined(STM32G081xx) || defined(STM32G071xx) + /* Interrupt mask register 2 set to default reset values */ + LL_EXTI_WriteReg(IMR2, 0x00000003U); + /* Event mask register 2 set to default reset values */ + LL_EXTI_WriteReg(EMR2, 0x00000000U); +#elif defined(STM32G0C1xx) || defined(STM32G0B1xx) + /* Interrupt mask register 2 set to default reset values */ + LL_EXTI_WriteReg(IMR2, 0x0000001FU); + /* Event mask register 2 set to default reset values */ + LL_EXTI_WriteReg(EMR2, 0x00000000U); + /* Rising Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(RTSR2, 0x00000000U); + /* Falling Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(FTSR2, 0x00000000U); + /* Software interrupt event register set to default reset values */ + LL_EXTI_WriteReg(SWIER2, 0x00000000U); + /* Pending register set to default reset values */ + LL_EXTI_WriteReg(RPR2, 0x00000004U); + LL_EXTI_WriteReg(FPR2, 0x00000004U); +#elif defined(STM32G0B0xx) + /* Interrupt mask register 2 set to default reset values */ + LL_EXTI_WriteReg(IMR2, 0x00000010U); + /* Event mask register 2 set to default reset values */ + LL_EXTI_WriteReg(EMR2, 0x00000000U); +#endif + + return 0x00u; +} + +/** + * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct. + * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - 0x00: EXTI registers are initialized + * - any other value : wrong configuration + */ +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + uint32_t status = 0x00u; + + /* Check the parameters */ + assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31)); +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + assert_param(IS_LL_EXTI_LINE_32_63(EXTI_InitStruct->Line_32_63)); +#endif + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand)); + assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode)); + + /* ENABLE LineCommand */ + if (EXTI_InitStruct->LineCommand != DISABLE) + { + assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger)); + + /* Configure EXTI Lines in range from 0 to 31 */ + if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE) + { + switch (EXTI_InitStruct->Mode) + { + case LL_EXTI_MODE_IT: + /* First Disable Event on provided Lines */ + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_EVENT: + /* First Disable IT on provided Lines */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Event on provided Lines */ + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_IT_EVENT: + /* Directly Enable IT & Event on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status = 0x01u; + break; + } + if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) + { + switch (EXTI_InitStruct->Trigger) + { + case LL_EXTI_TRIGGER_RISING: + /* First Disable Falling Trigger on provided Lines */ + LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Rising Trigger on provided Lines */ + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_FALLING: + /* First Disable Rising Trigger on provided Lines */ + LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Falling Trigger on provided Lines */ + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_RISING_FALLING: + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status |= 0x02u; + break; + } + } + } +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + /* Configure EXTI Lines in range from 32 to 63 */ + if (EXTI_InitStruct->Line_32_63 != LL_EXTI_LINE_NONE) + { + switch (EXTI_InitStruct->Mode) + { + case LL_EXTI_MODE_IT: + /* First Disable Event on provided Lines */ + LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63); + break; + case LL_EXTI_MODE_EVENT: + /* First Disable IT on provided Lines */ + LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63); + /* Then Enable Event on provided Lines */ + LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63); + break; + case LL_EXTI_MODE_IT_EVENT: + /* Directly Enable IT & Event on provided Lines */ + LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63); + LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63); + break; + default: + status |= 0x04u; + break; + } + } +#endif + } + /* DISABLE LineCommand */ + else + { + /* De-configure EXTI Lines in range from 0 to 31 */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + /* De-configure EXTI Lines in range from 32 to 63 */ + LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63); + LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63); +#endif + } + + return status; +} + +/** + * @brief Set each @ref LL_EXTI_InitTypeDef field to default value. + * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval None + */ +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE; +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + EXTI_InitStruct->Line_32_63 = LL_EXTI_LINE_NONE; +#endif + EXTI_InitStruct->LineCommand = DISABLE; + EXTI_InitStruct->Mode = LL_EXTI_MODE_IT; + EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (EXTI) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_gpio.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_gpio.c new file mode 100644 index 0000000..c1d90eb --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_gpio.c @@ -0,0 +1,281 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_gpio.c + * @author MCD Application Team + * @brief GPIO LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_gpio.h" +#include "stm32g0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) + +/** @addtogroup GPIO_LL + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * LL_GPIO_Init + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Private_Macros + * @{ + */ +#define IS_LL_GPIO_PIN(__VALUE__) (((0x00u) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) + +#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ + ((__VALUE__) == LL_GPIO_MODE_ANALOG)) + +#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ + ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) + +#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ + ((__VALUE__) == LL_GPIO_PULL_UP) ||\ + ((__VALUE__) == LL_GPIO_PULL_DOWN)) + +#if defined(GPIOE) +#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ + ((__VALUE__) == LL_GPIO_AF_1 ) ||\ + ((__VALUE__) == LL_GPIO_AF_2 ) ||\ + ((__VALUE__) == LL_GPIO_AF_3 ) ||\ + ((__VALUE__) == LL_GPIO_AF_4 ) ||\ + ((__VALUE__) == LL_GPIO_AF_5 ) ||\ + ((__VALUE__) == LL_GPIO_AF_6 ) ||\ + ((__VALUE__) == LL_GPIO_AF_7 ) ||\ + ((__VALUE__) == LL_GPIO_AF_8 ) ||\ + ((__VALUE__) == LL_GPIO_AF_9 ) ||\ + ((__VALUE__) == LL_GPIO_AF_10 )) +#else +#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ + ((__VALUE__) == LL_GPIO_AF_1 ) ||\ + ((__VALUE__) == LL_GPIO_AF_2 ) ||\ + ((__VALUE__) == LL_GPIO_AF_3 ) ||\ + ((__VALUE__) == LL_GPIO_AF_4 ) ||\ + ((__VALUE__) == LL_GPIO_AF_5 ) ||\ + ((__VALUE__) == LL_GPIO_AF_6 ) ||\ + ((__VALUE__) == LL_GPIO_AF_7 )) +#endif +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize GPIO registers (Registers restored to their default values). + * @param GPIOx GPIO Port + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are de-initialized + * - ERROR: Wrong GPIO Port + */ +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + + /* Force and Release reset on clock of GPIOx Port */ + if (GPIOx == GPIOA) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOA); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOA); + } + else if (GPIOx == GPIOB) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOB); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOB); + } + else if (GPIOx == GPIOC) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOC); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOC); + } +#if defined(GPIOD) + else if (GPIOx == GPIOD) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOD); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOD); + } +#endif /* GPIOD */ +#if defined(GPIOE) + else if (GPIOx == GPIOE) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOE); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOE); + } +#endif /* GPIOE */ +#if defined(GPIOF) + else if (GPIOx == GPIOF) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOF); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOF); + } +#endif /* GPIOF */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. + * @param GPIOx GPIO Port + * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure + * that contains the configuration information for the specified GPIO peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content + * - ERROR: Not applicable + */ +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + uint32_t pinpos; + uint32_t currentpin; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); + assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); + assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); + + /* ------------------------- Configure the port pins ---------------- */ + /* Initialize pinpos on first pin set */ + pinpos = 0; + + /* Configure the port pins */ + while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00u) + { + /* Get current io position */ + currentpin = (GPIO_InitStruct->Pin) & (0x00000001uL << pinpos); + + if (currentpin != 0x00u) + { + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check Speed mode parameters */ + assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); + + /* Speed mode configuration */ + LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); + + /* Check Output mode parameters */ + assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); + + /* Output mode configuration*/ + LL_GPIO_SetPinOutputType(GPIOx, currentpin, GPIO_InitStruct->OutputType); + } + + /* Pull-up Pull down resistor configuration*/ + LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); + + if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) + { + /* Check Alternate parameter */ + assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); + + /* Speed mode configuration */ + if (currentpin < LL_GPIO_PIN_8) + { + LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + else + { + LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + } + + /* Pin Mode configuration */ + LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); + } + pinpos++; + } + + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. + * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; + GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; + GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct->Alternate = LL_GPIO_AF_0; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_lpuart.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_lpuart.c new file mode 100644 index 0000000..7a58aea --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_lpuart.c @@ -0,0 +1,315 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_lpuart.c + * @author MCD Application Team + * @brief LPUART LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_lpuart.h" +#include "stm32g0xx_ll_rcc.h" +#include "stm32g0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (LPUART1) || defined (LPUART2) + +/** @addtogroup LPUART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Private_Constants + * @{ + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of LPUART registers */ + +#define IS_LL_LPUART_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPUART_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV256)) + +/* __BAUDRATE__ Depending on constraints applicable for LPUART BRR register */ +/* value : */ +/* - fck must be in the range [3 x baudrate, 4096 x baudrate] */ +/* - LPUART_BRR register value should be >= 0x300 */ +/* - LPUART_BRR register value should be <= 0xFFFFF (20 bits) */ +/* Baudrate specified by the user should belong to [8, 21300000].*/ +#define IS_LL_LPUART_BAUDRATE(__BAUDRATE__) (((__BAUDRATE__) <= 21300000U) && ((__BAUDRATE__) >= 8U)) + +/* __VALUE__ BRR content must be greater than or equal to 0x300. */ +#define IS_LL_LPUART_BRR_MIN(__VALUE__) ((__VALUE__) >= 0x300U) + +/* __VALUE__ BRR content must be lower than or equal to 0xFFFFF. */ +#define IS_LL_LPUART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x000FFFFFU) + +#define IS_LL_LPUART_DIRECTION(__VALUE__) (((__VALUE__) == LL_LPUART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_RX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX_RX)) + +#define IS_LL_LPUART_PARITY(__VALUE__) (((__VALUE__) == LL_LPUART_PARITY_NONE) \ + || ((__VALUE__) == LL_LPUART_PARITY_EVEN) \ + || ((__VALUE__) == LL_LPUART_PARITY_ODD)) + +#define IS_LL_LPUART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_LPUART_DATAWIDTH_7B) \ + || ((__VALUE__) == LL_LPUART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_LPUART_DATAWIDTH_9B)) + +#define IS_LL_LPUART_STOPBITS(__VALUE__) (((__VALUE__) == LL_LPUART_STOPBITS_1) \ + || ((__VALUE__) == LL_LPUART_STOPBITS_2)) + +#define IS_LL_LPUART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_LPUART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup LPUART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize LPUART registers (Registers restored to their default values). + * @param LPUARTx LPUART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPUART registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_LPUART_DeInit(USART_TypeDef *LPUARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_LPUART_INSTANCE(LPUARTx)); + + if (LPUARTx == LPUART1) + { + /* Force reset of LPUART peripheral */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPUART1); + + /* Release reset of LPUART peripheral */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPUART1); + } +#if defined(LPUART2) + else if (LPUARTx == LPUART2) + { + /* Force reset of LPUART peripheral */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPUART2); + + /* Release reset of LPUART peripheral */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPUART2); + } +#endif + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize LPUART registers according to the specified + * parameters in LPUART_InitStruct. + * @note As some bits in LPUART configuration registers can only be written when + * the LPUART is disabled (USART_CR1_UE bit =0), + * LPUART Peripheral should be in disabled state prior calling this function. + * Otherwise, ERROR result will be returned. + * @note Baud rate value stored in LPUART_InitStruct BaudRate field, should be valid (different from 0). + * @param LPUARTx LPUART Instance + * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure + * that contains the configuration information for the specified LPUART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPUART registers are initialized according to LPUART_InitStruct content + * - ERROR: Problem occurred during LPUART Registers initialization + */ +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, LL_LPUART_InitTypeDef *LPUART_InitStruct) +{ + ErrorStatus status = ERROR; +#if defined(LPUART2) + uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; +#else + uint32_t periphclk; +#endif + + /* Check the parameters */ + assert_param(IS_LPUART_INSTANCE(LPUARTx)); + assert_param(IS_LL_LPUART_PRESCALER(LPUART_InitStruct->PrescalerValue)); + assert_param(IS_LL_LPUART_BAUDRATE(LPUART_InitStruct->BaudRate)); + assert_param(IS_LL_LPUART_DATAWIDTH(LPUART_InitStruct->DataWidth)); + assert_param(IS_LL_LPUART_STOPBITS(LPUART_InitStruct->StopBits)); + assert_param(IS_LL_LPUART_PARITY(LPUART_InitStruct->Parity)); + assert_param(IS_LL_LPUART_DIRECTION(LPUART_InitStruct->TransferDirection)); + assert_param(IS_LL_LPUART_HWCONTROL(LPUART_InitStruct->HardwareFlowControl)); + + /* LPUART needs to be in disabled state, in order to be able to configure some bits in + CRx registers. Otherwise (LPUART not in Disabled state) => return ERROR */ + if (LL_LPUART_IsEnabled(LPUARTx) == 0U) + { + /*---------------------------- LPUART CR1 Configuration ----------------------- + * Configure LPUARTx CR1 (LPUART Word Length, Parity and Transfer Direction bits) with parameters: + * - DataWidth: USART_CR1_M bits according to LPUART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to LPUART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to LPUART_InitStruct->TransferDirection value + */ + MODIFY_REG(LPUARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE), + (LPUART_InitStruct->DataWidth | LPUART_InitStruct->Parity | LPUART_InitStruct->TransferDirection)); + + /*---------------------------- LPUART CR2 Configuration ----------------------- + * Configure LPUARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to LPUART_InitStruct->StopBits value. + */ + LL_LPUART_SetStopBitsLength(LPUARTx, LPUART_InitStruct->StopBits); + + /*---------------------------- LPUART CR3 Configuration ----------------------- + * Configure LPUARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according + * to LPUART_InitStruct->HardwareFlowControl value. + */ + LL_LPUART_SetHWFlowCtrl(LPUARTx, LPUART_InitStruct->HardwareFlowControl); + + /*---------------------------- LPUART BRR Configuration ----------------------- + * Retrieve Clock frequency used for LPUART Peripheral + */ +#if defined(LPUART2) + if (LPUARTx == LPUART1) + { + periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE); + } + else if (LPUARTx == LPUART2) + { + periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART2_CLKSOURCE); + } + else + { + /* Nothing to do, as error code is already assigned to ERROR value */ + } +#else + periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE); +#endif + + /* Configure the LPUART Baud Rate : + - prescaler value is required + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (LPUART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_LPUART_SetBaudRate(LPUARTx, + periphclk, + LPUART_InitStruct->PrescalerValue, + LPUART_InitStruct->BaudRate); + + /* Check BRR is greater than or equal to 0x300 */ + assert_param(IS_LL_LPUART_BRR_MIN(LPUARTx->BRR)); + + /* Check BRR is lower than or equal to 0xFFFFF */ + assert_param(IS_LL_LPUART_BRR_MAX(LPUARTx->BRR)); + } + + /*---------------------------- LPUART PRESC Configuration ----------------------- + * Configure LPUARTx PRESC (Prescaler) with parameters: + * - PrescalerValue: LPUART_PRESC_PRESCALER bits according to LPUART_InitStruct->PrescalerValue value. + */ + LL_LPUART_SetPrescaler(LPUARTx, LPUART_InitStruct->PrescalerValue); + } + + return (status); +} + +/** + * @brief Set each @ref LL_LPUART_InitTypeDef field to default value. + * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct) +{ + /* Set LPUART_InitStruct fields to default values */ + LPUART_InitStruct->PrescalerValue = LL_LPUART_PRESCALER_DIV1; + LPUART_InitStruct->BaudRate = 9600U; + LPUART_InitStruct->DataWidth = LL_LPUART_DATAWIDTH_8B; + LPUART_InitStruct->StopBits = LL_LPUART_STOPBITS_1; + LPUART_InitStruct->Parity = LL_LPUART_PARITY_NONE ; + LPUART_InitStruct->TransferDirection = LL_LPUART_DIRECTION_TX_RX; + LPUART_InitStruct->HardwareFlowControl = LL_LPUART_HWCONTROL_NONE; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 || LPUART2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c new file mode 100644 index 0000000..b0d231f --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c @@ -0,0 +1,1349 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rcc.c + * @author MCD Application Team + * @brief RCC LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @addtogroup RCC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_LL_Private_Macros + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE)) +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE)) +#else +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_USART1_CLKSOURCE) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(LPUART1) && defined(LPUART2) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPUART2_CLKSOURCE)) +#elif defined(LPUART1) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) +#endif /* LPUART1 && LPUART2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE)) +#else +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(LPTIM1) || defined(LPTIM2) +#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPTIM2_CLKSOURCE)) +#endif /* LPTIM1 || LPTIM2 */ + +#if defined(RNG) +#define IS_LL_RCC_RNG_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_RNG_CLKSOURCE)) +#endif /* RNG */ + +#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE)) + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2S2_CLKSOURCE)) +#else +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(CEC) +#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE)) +#endif /* CEC */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_LL_RCC_FDCAN_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_FDCAN_CLKSOURCE)) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RCC_CCIPR_TIM1SEL) && defined(RCC_CCIPR_TIM15SEL) +#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE)) +#elif defined(RCC_CCIPR_TIM1SEL) +#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE)) +#endif /* RCC_CCIPR_TIM1SEL */ + + + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +uint32_t RCC_GetSystemClockFreq(void); +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +uint32_t RCC_PLL_GetFreqDomain_SYS(void); +uint32_t RCC_PLL_GetFreqDomain_ADC(void); +uint32_t RCC_PLL_GetFreqDomain_I2S1(void); +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +uint32_t RCC_PLL_GetFreqDomain_I2S2(void); +uint32_t RCC_PLL_GetFreqDomain_USB(void); +uint32_t RCC_PLL_GetFreqDomain_FDCAN(void); +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +uint32_t RCC_PLL_GetFreqDomain_RNG(void); +uint32_t RCC_PLL_GetFreqDomain_TIM1(void); +uint32_t RCC_PLL_GetFreqDomain_TIM15(void); +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE and PLL OFF + * - AHB and APB1 prescaler set to 1. + * - CSS, MCO OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RCC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RCC_DeInit(void) +{ + /* Set HSION bit and wait for HSI READY bit */ + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + {} + + /* Set HSITRIM bits to reset value*/ + LL_RCC_HSI_SetCalibTrimming(0x40U); + + /* Reset CFGR register */ + LL_RCC_WriteReg(CFGR, 0x00000000U); + + /* Reset whole CR register but HSI in 2 steps in case HSEBYP is set */ + LL_RCC_WriteReg(CR, RCC_CR_HSION); + while (LL_RCC_HSE_IsReady() != 0U) + {} + LL_RCC_WriteReg(CR, RCC_CR_HSION); + + /* Wait for PLL READY bit to be reset */ + while (LL_RCC_PLL_IsReady() != 0U) + {} + + /* Reset PLLCFGR register */ + LL_RCC_WriteReg(PLLCFGR, 16U << RCC_PLLCFGR_PLLN_Pos); + + /* Disable all interrupts */ + LL_RCC_WriteReg(CIER, 0x00000000U); + + /* Clear all interrupts flags */ + LL_RCC_WriteReg(CICR, 0xFFFFFFFFU); + + return SUCCESS; +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * and different peripheral clocks available on the device. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE divided by HSI division factor(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(***) + * or HSI_VALUE(**) multiplied/divided by the PLL factors. + * @note (**) HSI_VALUE is a constant defined in this file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in this file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note The result of this function could be incorrect when using fractional + * value for HSE crystal. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * @{ + */ + +/** + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * @note Each time SYSCLK, HCLK and/or PCLK1 clock changes, this function + * must be called to update structure fields. Otherwise, any + * configuration based on this function will be incorrect. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); + + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); + + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); +} + +/** + * @brief Return USARTx clock frequency + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE + * @arg @ref LL_RCC_USART3_CLKSOURCE + * @retval USART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource) +{ + uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource)); + + if (USARTxSource == LL_RCC_USART1_CLKSOURCE) + { + /* USART1CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_PCLK1: /* USART1 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(RCC_CCIPR_USART2SEL) + else if (USARTxSource == LL_RCC_USART2_CLKSOURCE) + { + /* USART2CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + else if (USARTxSource == LL_RCC_USART3_CLKSOURCE) + { + /* USART3CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_USART3SEL */ + else + { + /* nothing to do */ + } + return usart_frequency; +} + +/** + * @brief Return I2Cx clock frequency + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @retval I2C clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready + */ +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) +{ + uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource)); + + if (I2CxSource == LL_RCC_I2C1_CLKSOURCE) + { + /* I2C1 CLK clock frequency */ + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */ + i2c_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + i2c_frequency = HSI_VALUE; + } + break; + + case LL_RCC_I2C1_CLKSOURCE_PCLK1: /* I2C1 Clock is PCLK1 */ + default: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(RCC_CCIPR_I2C2SEL) + else if (I2CxSource == LL_RCC_I2C2_CLKSOURCE) + { + /* I2C2 CLK clock frequency */ + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C2_CLKSOURCE_SYSCLK: /* I2C2 Clock is System Clock */ + i2c_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2C2_CLKSOURCE_HSI: /* I2C2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + i2c_frequency = HSI_VALUE; + } + break; + + case LL_RCC_I2C2_CLKSOURCE_PCLK1: /* I2C2 Clock is PCLK1 */ + default: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_I2C2SEL */ + else + { + } + + return i2c_frequency; +} + +/** + * @brief Return I2Sx clock frequency + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval I2S clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) +{ + uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); + + if (I2SxSource == LL_RCC_I2S1_CLKSOURCE) + { + /* I2S1 CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S1_CLKSOURCE_HSI: /* I2S1 Clock is HSI */ + i2s_frequency = HSI_VALUE; + break; + + case LL_RCC_I2S1_CLKSOURCE_PLL: /* I2S1 Clock is PLL"P" */ + if (LL_RCC_PLL_IsReady() == 1U) + { + i2s_frequency = RCC_PLL_GetFreqDomain_I2S1(); + } + break; + + + case LL_RCC_I2S1_CLKSOURCE_PIN: /* I2S1 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S1_CLKSOURCE_SYSCLK: /* I2S1 Clock is System Clock */ + default: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + } + } +#if defined(RCC_CCIPR2_I2S2SEL) + else if (I2SxSource == LL_RCC_I2S2_CLKSOURCE) + { + /* I2S2 CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S2_CLKSOURCE_HSI: /* I2S2 Clock is HSI */ + i2s_frequency = HSI_VALUE; + break; + + case LL_RCC_I2S2_CLKSOURCE_PLL: /* I2S2 Clock is PLL"P" */ + if (LL_RCC_PLL_IsReady() == 1U) + { + i2s_frequency = RCC_PLL_GetFreqDomain_I2S2(); + } + break; + + case LL_RCC_I2S2_CLKSOURCE_PIN: /* I2S2 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S2_CLKSOURCE_SYSCLK: /* I2S2 Clock is System Clock */ + default: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + } + } +#endif /* RCC_CCIPR2_I2S2SEL */ + else + { + } + return i2s_frequency; +} + +#if defined(LPUART1) || defined(LPUART2) +/** + * @brief Return LPUARTx clock frequency + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE (*) + * @retval LPUART clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + * (*) feature not available on all devices + */ +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource) +{ + uint32_t lpuart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPUART_CLKSOURCE(LPUARTxSource)); + + if (LPUARTxSource == LL_RCC_LPUART1_CLKSOURCE) + { + /* LPUART1CLK clock frequency */ + switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource)) + { + case LL_RCC_LPUART1_CLKSOURCE_SYSCLK: /* LPUART1 Clock is System Clock */ + lpuart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_LPUART1_CLKSOURCE_HSI: /* LPUART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lpuart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_LSE: /* LPUART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_PCLK1: /* LPUART1 Clock is PCLK1 */ + default: + lpuart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(LPUART2) + else if (LPUARTxSource == LL_RCC_LPUART2_CLKSOURCE) + { + /* LPUART2CLK clock frequency */ + switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource)) + { + case LL_RCC_LPUART2_CLKSOURCE_SYSCLK: /* LPUART2 Clock is System Clock */ + lpuart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_LPUART2_CLKSOURCE_HSI: /* LPUART2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lpuart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPUART2_CLKSOURCE_LSE: /* LPUART2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPUART2_CLKSOURCE_PCLK1: /* LPUART2 Clock is PCLK1 */ + default: + lpuart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* LPUART2 */ + else + { + } + + return lpuart_frequency; +} +#endif /* LPUART1 */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Return LPTIMx clock frequency + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @retval LPTIM clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready + */ +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource) +{ + uint32_t lptim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPTIM_CLKSOURCE(LPTIMxSource)); + + if (LPTIMxSource == LL_RCC_LPTIM1_CLKSOURCE) + { + /* LPTIM1CLK clock frequency */ + switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) + { + case LL_RCC_LPTIM1_CLKSOURCE_LSI: /* LPTIM1 Clock is LSI Osc. */ + if (LL_RCC_LSI_IsReady() == 1U) + { + lptim_frequency = LSI_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_HSI: /* LPTIM1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lptim_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_LSE: /* LPTIM1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lptim_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_PCLK1: /* LPTIM1 Clock is PCLK1 */ + default: + lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + else + { + /* LPTIM2CLK clock frequency */ + switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) + { + case LL_RCC_LPTIM2_CLKSOURCE_LSI: /* LPTIM2 Clock is LSI Osc. */ + if (LL_RCC_LSI_IsReady() == 1U) + { + lptim_frequency = LSI_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_HSI: /* LPTIM2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lptim_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_LSE: /* LPTIM2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lptim_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_PCLK1: /* LPTIM2 Clock is PCLK1 */ + default: + lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + + return lptim_frequency; +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Return TIMx clock frequency + * @param TIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE + * @endif + * @retval TIMx clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource) +{ + uint32_t tim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_TIM_CLKSOURCE(TIMxSource)); + + if (TIMxSource == LL_RCC_TIM1_CLKSOURCE) + { + /* TIM1CLK clock frequency */ + switch (LL_RCC_GetTIMClockSource(TIMxSource)) + { + case LL_RCC_TIM1_CLKSOURCE_PLL: /* TIM1 Clock is PLLQ */ + if (LL_RCC_PLL_IsReady() == 1U) + { + tim_frequency = RCC_PLL_GetFreqDomain_TIM1(); + } + break; + + case LL_RCC_TIM1_CLKSOURCE_PCLK1: /* TIM1 Clock is PCLK1 */ + default: + tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(TIM15) + else + { + if (TIMxSource == LL_RCC_TIM15_CLKSOURCE) + { + /* TIM15CLK clock frequency */ + switch (LL_RCC_GetTIMClockSource(TIMxSource)) + { + case LL_RCC_TIM15_CLKSOURCE_PLL: /* TIM1 Clock is PLLQ */ + if (LL_RCC_PLL_IsReady() == 1U) + { + tim_frequency = RCC_PLL_GetFreqDomain_TIM15(); + } + break; + + case LL_RCC_TIM15_CLKSOURCE_PCLK1: /* TIM15 Clock is PCLK1 */ + default: + tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + } +#endif /* TIM15 */ + return tim_frequency; +} +#endif /* RCC_CCIPR_TIM1SEL && RCC_CCIPR_TIM15SEL */ + + +#if defined(RNG) +/** + * @brief Return RNGx clock frequency + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval RNG clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource) +{ + uint32_t rng_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + uint32_t rngdiv; + + /* Check parameter */ + assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource)); + + /* RNGCLK clock frequency */ + switch (LL_RCC_GetRNGClockSource(RNGxSource)) + { + case LL_RCC_RNG_CLKSOURCE_PLL: /* PLL clock used as RNG clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + rng_frequency = RCC_PLL_GetFreqDomain_RNG(); + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + } + break; + + case LL_RCC_RNG_CLKSOURCE_HSI_DIV8: /* HSI clock divided by 8 used as RNG clock source */ + rng_frequency = HSI_VALUE / 8U; + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + break; + case LL_RCC_RNG_CLKSOURCE_SYSCLK: /* SYSCLK clock used as RNG clock source */ + rng_frequency = RCC_GetSystemClockFreq(); + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + break; + + case LL_RCC_RNG_CLKSOURCE_NONE: /* No clock used as RNG clock source */ + default: + rng_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + + } + + return rng_frequency; +} +#endif /* RNG */ + +#if defined(CEC) +/** + * @brief Return CEC clock frequency + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval CEC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource) +{ + uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource)); + + /* CECCLK clock frequency */ + switch (LL_RCC_GetCECClockSource(CECxSource)) + { + case LL_RCC_CEC_CLKSOURCE_LSE: /* CEC Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + cec_frequency = LSE_VALUE; + } + break; + + case LL_RCC_CEC_CLKSOURCE_HSI_DIV488: /* CEC Clock is HSI Osc. */ + default: + if (LL_RCC_HSI_IsReady() == 1U) + { + cec_frequency = (HSI_VALUE / 488U); + } + break; + } + + return cec_frequency; +} +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Return FDCANx clock frequency + * @param FDCANxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval FDCANx clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready + */ +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource) +{ + uint32_t fdcan_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_FDCAN_CLKSOURCE(FDCANxSource)); + + /* FDCANCLK clock frequency */ + switch (LL_RCC_GetFDCANClockSource(FDCANxSource)) + { + case LL_RCC_FDCAN_CLKSOURCE_PLL: /* FDCAN Clock is PLL "Q" Osc. */ + if (LL_RCC_PLL_IsReady() == 1U) + { + fdcan_frequency = RCC_PLL_GetFreqDomain_FDCAN(); + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_HSE: /* FDCAN Clock is HSE Osc. */ + if (LL_RCC_HSE_IsReady() == 1U) + { + fdcan_frequency = HSE_VALUE; + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_PCLK1: /* FDCAN Clock is PCLK1 */ + default: + fdcan_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + + return fdcan_frequency; +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Return ADCx clock frequency + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval ADC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource) +{ + uint32_t adc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource)); + + /* ADCCLK clock frequency */ + switch (LL_RCC_GetADCClockSource(ADCxSource)) + { + case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ + adc_frequency = RCC_GetSystemClockFreq(); + break; + case LL_RCC_ADC_CLKSOURCE_HSI : /* HSI clock used as ADC clock source */ + adc_frequency = HSI_VALUE; + break; + + case LL_RCC_ADC_CLKSOURCE_PLL: /* PLLP clock used as ADC clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + adc_frequency = RCC_PLL_GetFreqDomain_ADC(); + } + break; + default: + adc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return adc_frequency; +} + +/** + * @brief Return RTC clock frequency + * @retval RTC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (LSI, LSE or HSE) are not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetRTCClockFreq(void) +{ + uint32_t rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* RTCCLK clock frequency */ + switch (LL_RCC_GetRTCClockSource()) + { + case LL_RCC_RTC_CLKSOURCE_LSE: /* LSE clock used as RTC clock source */ + if (LL_RCC_LSE_IsReady() == 1U) + { + rtc_frequency = LSE_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_LSI: /* LSI clock used as RTC clock source */ + if (LL_RCC_LSI_IsReady() == 1U) + { + rtc_frequency = LSI_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_HSE_DIV32: /* HSE clock used as ADC clock source */ + rtc_frequency = HSE_VALUE / 32U; + break; + + case LL_RCC_RTC_CLKSOURCE_NONE: /* No clock used as RTC clock source */ + default: + rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return rtc_frequency; +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Return USBx clock frequency + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval USB clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI48) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource) +{ + uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource)); + + /* USBCLK clock frequency */ + switch (LL_RCC_GetUSBClockSource(USBxSource)) + { +#if defined(RCC_HSI48_SUPPORT) + case LL_RCC_USB_CLKSOURCE_HSI48: /* HSI48 used as USB clock source */ + if (LL_RCC_HSI48_IsReady() != 0U) + { + usb_frequency = HSI48_VALUE; + } + break; +#endif /* RCC_HSI48_SUPPORT */ + + case LL_RCC_USB_CLKSOURCE_HSE: /* HSE used as USB clock source */ + if (LL_RCC_HSE_IsReady() != 0U) + { + usb_frequency = HSE_VALUE; + } + break; + + case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ + if (LL_RCC_PLL_IsReady() != 0U) + { + usb_frequency = RCC_PLL_GetFreqDomain_USB(); + } + break; + + default: + usb_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return usb_frequency; +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx) */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock frequency + * @retval SYSTEM clock frequency (in Hz) + */ +uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency; + uint32_t hsidiv; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (LL_RCC_GetSysClkSource()) + { + case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ + frequency = HSE_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */ + frequency = RCC_PLL_GetFreqDomain_SYS(); + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + frequency = (HSI_VALUE / hsidiv); + break; + } + + return frequency; +} + +/** + * @brief Return HCLK clock frequency + * @param SYSCLK_Frequency SYSCLK clock frequency + * @retval HCLK clock frequency (in Hz) + */ +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) +{ + /* HCLK clock frequency */ + return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); +} + +/** + * @brief Return PCLK1 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK1 clock frequency (in Hz) + */ +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK1 clock frequency */ + return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); +} +/** + * @brief Return PLL clock frequency used for system domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_SYS(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllinputfreq = HSI_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); +} +/** + * @brief Return PLL clock frequency used for ADC domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_ADC(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + ADC Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Return PLL clock frequency used for FDCAN domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_FDCAN(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + FDCAN Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_FDCAN_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Return PLL clock frequency used for I2S1 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_I2S1(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + I2S1 Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_I2S1_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Return PLL clock frequency used for I2S2 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_I2S2(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + I2S2 Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_I2S2_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Return PLL clock frequency used for RNG domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_RNG(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + RNG Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_RNG_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Return PLL clock frequency used for USB domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_USB(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + RNG Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_USB_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Return PLL clock frequency used for TIM1 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_TIM1(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + TIM1 Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_TIM1_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Return PLL clock frequency used for TIM15 domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_TIM15(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + TIM15 Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_TIM15_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_tim.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_tim.c new file mode 100644 index 0000000..328d05b --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_tim.c @@ -0,0 +1,1360 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_tim.c + * @author MCD Application Team + * @brief TIM LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_tim.h" +#include "stm32g0xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) || defined (TIM6) || defined (TIM7) + +/** @addtogroup TIM_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup TIM_LL_Private_Macros + * @{ + */ +#define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) + +#define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) + +#define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ + || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASSYMETRIC_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASSYMETRIC_PWM2)) + +#define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ + || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) + +#define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ + || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) + +#define IS_LL_TIM_OCIDLESTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCIDLESTATE_LOW) \ + || ((__VALUE__) == LL_TIM_OCIDLESTATE_HIGH)) + +#define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) + +#define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) + +#define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) + +#define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12)) + +#define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) + +#define IS_LL_TIM_OSSR_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSR_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSR_ENABLE)) + +#define IS_LL_TIM_OSSI_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSI_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSI_ENABLE)) + +#define IS_LL_TIM_LOCK_LEVEL(__VALUE__) (((__VALUE__) == LL_TIM_LOCKLEVEL_OFF) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_1) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_2) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_3)) + +#define IS_LL_TIM_BREAK_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK_ENABLE)) + +#define IS_LL_TIM_BREAK_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK_POLARITY_HIGH)) + +#define IS_LL_TIM_BREAK_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_BREAK_AFMODE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_AFMODE_INPUT) \ + || ((__VALUE__) == LL_TIM_BREAK_AFMODE_BIDIRECTIONAL)) + +#define IS_LL_TIM_BREAK2_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK2_ENABLE)) + +#define IS_LL_TIM_BREAK2_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK2_POLARITY_HIGH)) + +#define IS_LL_TIM_BREAK2_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_BREAK2_AFMODE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_AFMODE_INPUT) \ + || ((__VALUE__) == LL_TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + +#define IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(__VALUE__) (((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_DISABLE) \ + || ((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_ENABLE)) +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup TIM_LL_Private_Functions TIM Private Functions + * @{ + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC5Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC6Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_LL_Exported_Functions + * @{ + */ + +/** @addtogroup TIM_LL_EF_Init + * @{ + */ + +/** + * @brief Set TIMx registers to their reset values. + * @param TIMx Timer instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: invalid TIMx instance + */ +ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx) +{ + ErrorStatus result = SUCCESS; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + + if (TIMx == TIM1) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1); + } +#if defined(TIM2) + else if (TIMx == TIM2) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2); + } +#endif +#if defined(TIM3) + else if (TIMx == TIM3) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); + } +#endif +#if defined(TIM4) + else if (TIMx == TIM4) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM4); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM4); + } +#endif +#if defined(TIM6) + else if (TIMx == TIM6) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6); + } +#endif +#if defined(TIM7) + else if (TIMx == TIM7) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7); + } +#endif + else if (TIMx == TIM14) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM14); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM14); + } +#if defined(TIM15) + else if (TIMx == TIM15) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM15); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM15); + } +#endif + else if (TIMx == TIM16) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16); + } +#if defined(TIM17) + else if (TIMx == TIM17) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17); + } +#endif + else + { + result = ERROR; + } + + return result; +} + +/** + * @brief Set the fields of the time base unit configuration data structure + * to their default values. + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) + * @retval None + */ +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) +{ + /* Set the default configuration */ + TIM_InitStruct->Prescaler = (uint16_t)0x0000; + TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; + TIM_InitStruct->Autoreload = 0xFFFFFFFFU; + TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; + TIM_InitStruct->RepetitionCounter = 0x00000000U; +} + +/** + * @brief Configure the TIMx time base unit. + * @param TIMx Timer Instance + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (TIMx time base unit configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); + assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); + + tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); + + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); + } + + /* Write to TIMx CR1 */ + LL_TIM_WriteReg(TIMx, CR1, tmpcr1); + + /* Set the Autoreload value */ + LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); + + /* Set the Prescaler value */ + LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + LL_TIM_SetRepetitionCounter(TIMx, TIM_InitStruct->RepetitionCounter); + } + + /* Generate an update event to reload the Prescaler + and the repetition counter value (if applicable) immediately */ + LL_TIM_GenerateEvent_UPDATE(TIMx); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx output channel configuration data + * structure to their default values. + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (the output channel configuration data structure) + * @retval None + */ +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + /* Set the default configuration */ + TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; + TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->OCNState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->CompareValue = 0x00000000U; + TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCNPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCIdleState = LL_TIM_OCIDLESTATE_LOW; + TIM_OC_InitStruct->OCNIdleState = LL_TIM_OCIDLESTATE_LOW; +} + +/** + * @brief Configure the TIMx output channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = OC1Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = OC2Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = OC3Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = OC4Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH5: + result = OC5Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH6: + result = OC6Config(TIMx, TIM_OC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Set the fields of the TIMx input channel configuration data + * structure to their default values. + * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration data structure) + * @retval None + */ +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; + TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; + TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the TIMx input channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = IC1Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = IC2Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = IC3Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = IC4Config(TIMx, TIM_IC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Fills each TIM_EncoderInitStruct field with its default value + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface configuration data structure) + * @retval None + */ +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + /* Set the default configuration */ + TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; + TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the encoder interface of the timer instance. + * @param TIMx Timer Instance + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Configure TI1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); + + /* Configure TI2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); + + /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Set encoder mode */ + LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx Hall sensor interface configuration data + * structure to their default values. + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface configuration data structure) + * @retval None + */ +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + /* Set the default configuration */ + TIM_HallSensorInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_HallSensorInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_HallSensorInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_HallSensorInitStruct->CommutationDelay = 0U; +} + +/** + * @brief Configure the Hall sensor interface of the timer instance. + * @note TIMx CH1, CH2 and CH3 inputs connected through a XOR + * to the TI1 input channel + * @note TIMx slave mode controller is configured in reset mode. + Selected internal trigger is TI1F_ED. + * @note Channel 1 is configured as input, IC1 is mapped on TRC. + * @note Captured value stored in TIMx_CCR1 correspond to the time elapsed + * between 2 changes on the inputs. It gives information about motor speed. + * @note Channel 2 is configured in output PWM 2 mode. + * @note Compare value stored in TIMx_CCR2 corresponds to the commutation delay. + * @note OC2REF is selected as trigger output on TRGO. + * @note LL_TIM_IC_POLARITY_BOTHEDGE must not be used for TI1 when it is used + * when TIMx operates in Hall sensor interface mode. + * @param TIMx Timer Instance + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor interface configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + uint32_t tmpcr2; + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_HallSensorInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ICPSC(TIM_HallSensorInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_HallSensorInitStruct->IC1Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx SMCR register value */ + tmpsmcr = LL_TIM_ReadReg(TIMx, SMCR); + + /* Connect TIMx_CH1, CH2 and CH3 pins to the TI1 input */ + tmpcr2 |= TIM_CR2_TI1S; + + /* OC2REF signal is used as trigger output (TRGO) */ + tmpcr2 |= LL_TIM_TRGO_OC2REF; + + /* Configure the slave mode controller */ + tmpsmcr &= (uint32_t)~(TIM_SMCR_TS | TIM_SMCR_SMS); + tmpsmcr |= LL_TIM_TS_TI1F_ED; + tmpsmcr |= LL_TIM_SLAVEMODE_RESET; + + /* Configure input channel 1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(LL_TIM_ACTIVEINPUT_TRC >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Prescaler >> 16U); + + /* Configure input channel 2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_OC2M | TIM_CCMR1_OC2FE | TIM_CCMR1_OC2PE | TIM_CCMR1_OC2CE); + tmpccmr1 |= (uint32_t)(LL_TIM_OCMODE_PWM2 << 8U); + + /* Set Channel 1 polarity and enable Channel 1 and Channel2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_HallSensorInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx SMCR */ + LL_TIM_WriteReg(TIMx, SMCR, tmpsmcr); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + /* Write to TIMx CCR2 */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_HallSensorInitStruct->CommutationDelay); + + return SUCCESS; +} + +/** + * @brief Set the fields of the Break and Dead Time configuration data structure + * to their default values. + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure) + * @retval None + */ +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->OSSRState = LL_TIM_OSSR_DISABLE; + TIM_BDTRInitStruct->OSSIState = LL_TIM_OSSI_DISABLE; + TIM_BDTRInitStruct->LockLevel = LL_TIM_LOCKLEVEL_OFF; + TIM_BDTRInitStruct->DeadTime = (uint8_t)0x00; + TIM_BDTRInitStruct->BreakState = LL_TIM_BREAK_DISABLE; + TIM_BDTRInitStruct->BreakPolarity = LL_TIM_BREAK_POLARITY_LOW; + TIM_BDTRInitStruct->BreakFilter = LL_TIM_BREAK_FILTER_FDIV1; + TIM_BDTRInitStruct->BreakAFMode = LL_TIM_BREAK_AFMODE_INPUT; + TIM_BDTRInitStruct->Break2State = LL_TIM_BREAK2_DISABLE; + TIM_BDTRInitStruct->Break2Polarity = LL_TIM_BREAK2_POLARITY_LOW; + TIM_BDTRInitStruct->Break2Filter = LL_TIM_BREAK2_FILTER_FDIV1; + TIM_BDTRInitStruct->Break2AFMode = LL_TIM_BREAK2_AFMODE_INPUT; + TIM_BDTRInitStruct->AutomaticOutput = LL_TIM_AUTOMATICOUTPUT_DISABLE; +} + +/** + * @brief Configure the Break and Dead Time feature of the timer instance. + * @note As the bits BK2P, BK2E, BK2F[3:0], BKF[3:0], AOE, BKP, BKE, OSSI, OSSR + * and DTG[7:0] can be write-locked depending on the LOCK configuration, it + * can be necessary to configure all of them during the first write access to + * the TIMx_BDTR register. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @param TIMx Timer Instance + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Break and Dead Time is initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + uint32_t tmpbdtr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OSSR_STATE(TIM_BDTRInitStruct->OSSRState)); + assert_param(IS_LL_TIM_OSSI_STATE(TIM_BDTRInitStruct->OSSIState)); + assert_param(IS_LL_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->LockLevel)); + assert_param(IS_LL_TIM_BREAK_STATE(TIM_BDTRInitStruct->BreakState)); + assert_param(IS_LL_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->BreakPolarity)); + assert_param(IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->AutomaticOutput)); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, TIM_BDTRInitStruct->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, TIM_BDTRInitStruct->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, TIM_BDTRInitStruct->OSSIState); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, TIM_BDTRInitStruct->OSSRState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, TIM_BDTRInitStruct->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, TIM_BDTRInitStruct->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, TIM_BDTRInitStruct->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, TIM_BDTRInitStruct->AutomaticOutput); + if (IS_TIM_ADVANCED_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_BREAK_FILTER(TIM_BDTRInitStruct->BreakFilter)); + assert_param(IS_LL_TIM_BREAK_AFMODE(TIM_BDTRInitStruct->BreakAFMode)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, TIM_BDTRInitStruct->BreakFilter); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, TIM_BDTRInitStruct->BreakAFMode); + } + + if (IS_TIM_BKIN2_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_BREAK2_STATE(TIM_BDTRInitStruct->Break2State)); + assert_param(IS_LL_TIM_BREAK2_POLARITY(TIM_BDTRInitStruct->Break2Polarity)); + assert_param(IS_LL_TIM_BREAK2_FILTER(TIM_BDTRInitStruct->Break2Filter)); + assert_param(IS_LL_TIM_BREAK2_AFMODE(TIM_BDTRInitStruct->Break2AFMode)); + + /* Set the BREAK2 input related BDTR bit-fields */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (TIM_BDTRInitStruct->Break2Filter)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, TIM_BDTRInitStruct->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, TIM_BDTRInitStruct->Break2Polarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, TIM_BDTRInitStruct->Break2AFMode); + } + + /* Set TIMx_BDTR */ + LL_TIM_WriteReg(TIMx, BDTR, tmpbdtr); + + return SUCCESS; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup TIM_LL_Private_Functions TIM Private Functions + * @brief Private functions + * @{ + */ +/** + * @brief Configure the TIMx output channel 1. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); + + /* Set the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NP, TIM_OCInitStruct->OCNPolarity << 2U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NE, TIM_OCInitStruct->OCNState << 2U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1, TIM_OCInitStruct->OCIdleState); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1N, TIM_OCInitStruct->OCNIdleState << 1U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 2. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NP, TIM_OCInitStruct->OCNPolarity << 6U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NE, TIM_OCInitStruct->OCNState << 6U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2, TIM_OCInitStruct->OCIdleState << 2U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2N, TIM_OCInitStruct->OCNIdleState << 3U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 3. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NP, TIM_OCInitStruct->OCNPolarity << 10U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NE, TIM_OCInitStruct->OCNState << 10U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3, TIM_OCInitStruct->OCIdleState << 4U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3N, TIM_OCInitStruct->OCNIdleState << 5U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 4. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS4, TIM_OCInitStruct->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 5. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 5 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC5Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr3; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 5: Reset the CC5E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC5E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CCMR3 register value */ + tmpccmr3 = LL_TIM_ReadReg(TIMx, CCMR3); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr3, TIM_CCMR3_OC5M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC5P, TIM_OCInitStruct->OCPolarity << 16U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC5E, TIM_OCInitStruct->OCState << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(TIMx->CR2, TIM_CR2_OIS5, TIM_OCInitStruct->OCIdleState << 8U); + + } + + /* Write to TIMx CCMR3 */ + LL_TIM_WriteReg(TIMx, CCMR3, tmpccmr3); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH5(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 6. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 6 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC6Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr3; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 5: Reset the CC6E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC6E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CCMR3 register value */ + tmpccmr3 = LL_TIM_ReadReg(TIMx, CCMR3); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr3, TIM_CCMR3_OC6M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC6P, TIM_OCInitStruct->OCPolarity << 20U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC6E, TIM_OCInitStruct->OCState << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(TIMx->CR2, TIM_CR2_OIS6, TIM_OCInitStruct->OCIdleState << 10U); + } + + /* Write to TIMx CCMR3 */ + LL_TIM_WriteReg(TIMx, CCMR3, tmpccmr3); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH6(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 1. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC1E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC1P | TIM_CCER_CC1NP), + (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 2. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC2P | TIM_CCER_CC2NP), + ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 3. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC3E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC3P | TIM_CCER_CC3NP), + ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 4. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC4P | TIM_CCER_CC4NP), + ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); + + return SUCCESS; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM14 || TIM15 || TIM16 || TIM17 || TIM6 || TIM7 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_ucpd.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_ucpd.c new file mode 100644 index 0000000..e6810e6 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_ucpd.c @@ -0,0 +1,187 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_ucpd.c + * @author MCD Application Team + * @brief UCPD LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_ucpd.h" +#include "stm32g0xx_ll_bus.h" +#include "stm32g0xx_ll_rcc.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ +#if defined (UCPD1) || defined (UCPD2) +/** @addtogroup UCPD_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UCPD_LL_Private_Constants UCPD Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UCPD_LL_Private_Macros UCPD Private Macros + * @{ + */ + + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UCPD_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UCPD_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the UCPD registers to their default reset values. + * @param UCPDx ucpd Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ucpd registers are de-initialized + * - ERROR: ucpd registers are not de-initialized + */ +ErrorStatus LL_UCPD_DeInit(UCPD_TypeDef *UCPDx) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_UCPD_ALL_INSTANCE(UCPDx)); + + LL_UCPD_Disable(UCPDx); + + if (UCPD1 == UCPDx) + { + /* Force reset of ucpd clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UCPD1); + + /* Release reset of ucpd clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UCPD1); + + /* Disable ucpd clock */ + LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_UCPD1); + + status = SUCCESS; + } + if (UCPD2 == UCPDx) + { + /* Force reset of ucpd clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UCPD2); + + /* Release reset of ucpd clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UCPD2); + + /* Disable ucpd clock */ + LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_UCPD2); + + status = SUCCESS; + } + + return status; +} + +/** + * @brief Initialize the ucpd registers according to the specified parameters in UCPD_InitStruct. + * @note As some bits in ucpd configuration registers can only be written when the ucpd is disabled (ucpd_CR1_SPE bit =0), + * UCPD peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param UCPDx UCPD Instance + * @param UCPD_InitStruct pointer to a @ref LL_UCPD_InitTypeDef structure that contains + * the configuration information for the UCPD peripheral. + * @retval An ErrorStatus enumeration value. (Return always SUCCESS) + */ +ErrorStatus LL_UCPD_Init(UCPD_TypeDef *UCPDx, LL_UCPD_InitTypeDef *UCPD_InitStruct) +{ + /* Check the ucpd Instance UCPDx*/ + assert_param(IS_UCPD_ALL_INSTANCE(UCPDx)); + + if(UCPD1 == UCPDx) + { + LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_UCPD1); + } + + if(UCPD2 == UCPDx) + { + LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_UCPD2); + } + + LL_UCPD_Disable(UCPDx); + + /*---------------------------- UCPDx CFG1 Configuration ------------------------*/ + MODIFY_REG(UCPDx->CFG1, + UCPD_CFG1_PSC_UCPDCLK | UCPD_CFG1_TRANSWIN | UCPD_CFG1_IFRGAP | UCPD_CFG1_HBITCLKDIV, + UCPD_InitStruct->psc_ucpdclk | (UCPD_InitStruct->transwin << UCPD_CFG1_TRANSWIN_Pos) | + (UCPD_InitStruct->IfrGap << UCPD_CFG1_IFRGAP_Pos) | UCPD_InitStruct->HbitClockDiv); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_UCPD_InitTypeDef field to default value. + * @param UCPD_InitStruct pointer to a @ref LL_UCPD_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_UCPD_StructInit(LL_UCPD_InitTypeDef *UCPD_InitStruct) +{ + /* Set UCPD_InitStruct fields to default values */ + UCPD_InitStruct->psc_ucpdclk = LL_UCPD_PSC_DIV2; + UCPD_InitStruct->transwin = 0x7; /* Divide by 8 */ + UCPD_InitStruct->IfrGap = 0x10; /* Divide by 17 */ + UCPD_InitStruct->HbitClockDiv = 0x0D; /* Divide by 14 to produce HBITCLK */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (UCPD1) || defined (UCPD2) */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usart.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usart.c new file mode 100644 index 0000000..2819f79 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usart.c @@ -0,0 +1,481 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usart.c + * @author MCD Application Team + * @brief USART LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_usart.h" +#include "stm32g0xx_ll_rcc.h" +#include "stm32g0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART4) || defined (USART5) || defined (USART6) + +/** @addtogroup USART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Macros + * @{ + */ + +#define IS_LL_USART_PRESCALER(__VALUE__) (((__VALUE__) == LL_USART_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV256)) + +/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available + * divided by the smallest oversampling used on the USART (i.e. 8) */ +#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 8000000U) + +/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ +#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) + +/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */ +#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + +#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + +#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) + +#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_7B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + +#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + +#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + +#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + +#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + +#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + +#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) + +#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup USART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize USART registers (Registers restored to their default values). + * @param USARTx USART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are de-initialized + * - ERROR: USART registers are not de-initialized + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + + if (USARTx == USART1) + { + /* Force reset of USART clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1); + + /* Release reset of USART clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1); + } + else if (USARTx == USART2) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2); + } +#if defined(USART3) + else if (USARTx == USART3) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3); + } +#endif /* USART3 */ +#if defined(USART4) + else if (USARTx == USART4) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART4); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART4); + } +#endif /* USART4 */ +#if defined(USART5) + else if (USARTx == USART5) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART5); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART5); + } +#endif /* USART5 */ +#if defined(USART6) + else if (USARTx == USART6) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART6); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART6); + } +#endif /* USART6 */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize USART registers according to the specified + * parameters in USART_InitStruct. + * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), + * USART Peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). + * @param USARTx USART Instance + * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure + * that contains the configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are initialized according to USART_InitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; +#if !defined(RCC_CCIPR_USART3SEL)&&!defined(RCC_CCIPR_USART4SEL)||!defined(RCC_CCIPR_USART2SEL) ||!defined(RCC_CCIPR_USART5SEL) ||!defined(RCC_CCIPR_USART6SEL) + LL_RCC_ClocksTypeDef RCC_Clocks; +#endif /* !RCC_CCIPR_USART3SEL && !RCC_CCIPR_USART4SEL || !RCC_CCIPR_USART2SEL */ + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_PRESCALER(USART_InitStruct->PrescalerValue)); + assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); + assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); + assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); + assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); + assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); + assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); + assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR1 Configuration --------------------- + * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: + * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value + * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. + */ + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); + + /*---------------------------- USART CR2 Configuration --------------------- + * Configure USARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. + * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). + */ + LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); + + /*---------------------------- USART CR3 Configuration --------------------- + * Configure USARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value. + */ + LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); + + /*---------------------------- USART BRR Configuration --------------------- + * Retrieve Clock frequency used for USART Peripheral + */ + if (USARTx == USART1) + { + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART1_CLKSOURCE); + } + else if (USARTx == USART2) + { +#if defined(RCC_CCIPR_USART2SEL) + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART2_CLKSOURCE); +#else + /* USART2 clock is PCLK */ + LL_RCC_GetSystemClocksFreq(&RCC_Clocks); + periphclk = RCC_Clocks.PCLK1_Frequency; +#endif /* RCC_CCIPR_USART2SEL */ + } +#if defined(USART3) + else if (USARTx == USART3) + { +#if defined(RCC_CCIPR_USART3SEL) + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART3_CLKSOURCE); +#else + /* USART3 clock is PCLK */ + LL_RCC_GetSystemClocksFreq(&RCC_Clocks); + periphclk = RCC_Clocks.PCLK1_Frequency; +#endif /* RCC_CCIPR_USART3SEL */ + } +#endif /* USART3 */ +#if defined(USART4) + else if (USARTx == USART4) + { +#if defined(RCC_CCIPR_USART4SEL) + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART4_CLKSOURCE); +#else + /* USART4 clock is PCLK1 */ + LL_RCC_GetSystemClocksFreq(&RCC_Clocks); + periphclk = RCC_Clocks.PCLK1_Frequency; +#endif /* RCC_CCIPR_USART4SEL */ + } +#endif /* USART4 */ +#if defined(USART5) + else if (USARTx == USART5) + { + /* USART5 clock is PCLK1 */ + LL_RCC_GetSystemClocksFreq(&RCC_Clocks); + periphclk = RCC_Clocks.PCLK1_Frequency; + } +#endif /* USART5 */ +#if defined(USART6) + else if (USARTx == USART6) + { + /* USART6 clock is PCLK1 */ + LL_RCC_GetSystemClocksFreq(&RCC_Clocks); + periphclk = RCC_Clocks.PCLK1_Frequency; + } +#endif /* USART6 */ + else + { + /* Nothing to do, as error code is already assigned to ERROR value */ + } + + /* Configure the USART Baud Rate : + - prescaler value is required + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (USART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->PrescalerValue, + USART_InitStruct->OverSampling, + USART_InitStruct->BaudRate); + + /* Check BRR is greater than or equal to 16d */ + assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); + + /* Check BRR is lower than or equal to 0xFFFF */ + assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR)); + } + + /*---------------------------- USART PRESC Configuration ----------------------- + * Configure USARTx PRESC (Prescaler) with parameters: + * - PrescalerValue: USART_PRESC_PRESCALER bits according to USART_InitStruct->PrescalerValue value. + */ + LL_USART_SetPrescaler(USARTx, USART_InitStruct->PrescalerValue); + } + /* Endif (=> USART not in Disabled state => return ERROR) */ + + return (status); +} + +/** + * @brief Set each @ref LL_USART_InitTypeDef field to default value. + * @param USART_InitStruct pointer to a @ref LL_USART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) +{ + /* Set USART_InitStruct fields to default values */ + USART_InitStruct->PrescalerValue = LL_USART_PRESCALER_DIV1; + USART_InitStruct->BaudRate = 9600U; + USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct->StopBits = LL_USART_STOPBITS_1; + USART_InitStruct->Parity = LL_USART_PARITY_NONE ; + USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; +} + +/** + * @brief Initialize USART Clock related settings according to the + * specified parameters in the USART_ClockInitStruct. + * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), + * USART Peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param USARTx USART Instance + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * that contains the Clock configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check USART Instance and Clock signal output parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR2 Configuration -----------------------*/ + /* If Clock signal has to be output */ + if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE) + { + /* Deactivate Clock signal delivery : + * - Disable Clock Output: USART_CR2_CLKEN cleared + */ + LL_USART_DisableSCLKOutput(USARTx); + } + else + { + /* Ensure USART instance is USART capable */ + assert_param(IS_USART_INSTANCE(USARTx)); + + /* Check clock related parameters */ + assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); + assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); + assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Clock signal related bits) with parameters: + * - Enable Clock Output: USART_CR2_CLKEN set + * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value + * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value + * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. + */ + MODIFY_REG(USARTx->CR2, + USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, + USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity | + USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); + } + } + /* Else (USART not in Disabled state => return ERROR */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + /* Set LL_USART_ClockInitStruct fields with default values */ + USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; + USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || USART4 || USART5 || USART6 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_utils.c b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_utils.c new file mode 100644 index 0000000..05a18d5 --- /dev/null +++ b/USB-PD_Provider_1port/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_utils.c @@ -0,0 +1,577 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_utils.c + * @author MCD Application Team + * @brief UTILS LL module driver. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_utils.h" +#include "stm32g0xx_ll_rcc.h" +#include "stm32g0xx_ll_system.h" +#include "stm32g0xx_ll_pwr.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +/** @addtogroup UTILS_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Constants + * @{ + */ +#define UTILS_MAX_FREQUENCY 64000000U /*!< Maximum frequency for system clock, in Hz */ + +/* Defines used for PLL range */ +#define UTILS_PLLVCO_INPUT_MIN 4000000U /*!< Frequency min for PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MAX 8000000U /*!< Frequency max for PLLVCO input, in Hz */ +#define UTILS_PLLVCO_OUTPUT_MIN 64000000U /*!< Frequency min for PLLVCO output, in Hz */ +#define UTILS_PLLVCO_OUTPUT_MAX 344000000U /*!< Frequency max for PLLVCO output, in Hz */ + +/* Defines used for HSE range */ +#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */ +#define UTILS_HSE_FREQUENCY_MAX 48000000U /*!< Frequency max for HSE frequency, in Hz */ + +/* Defines used for FLASH latency according to HCLK Frequency */ +#define UTILS_SCALE1_LATENCY1_FREQ 24000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */ +#define UTILS_SCALE1_LATENCY2_FREQ 48000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */ +#define UTILS_SCALE1_LATENCY3_FREQ 64000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 1 */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Macros + * @{ + */ +#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) + +#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_16)) + +#define IS_LL_UTILS_HSI_DIV(__VALUE__) (((__VALUE__) == LL_RCC_HSI_DIV_1) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_2) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_4) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_8) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_16) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_32) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_64) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_128)) + +#define IS_LL_UTILS_PLLM_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLM_DIV_1) \ + || ((__VALUE__) == LL_RCC_PLLM_DIV_2) \ + || ((__VALUE__) == LL_RCC_PLLM_DIV_3) \ + || ((__VALUE__) == LL_RCC_PLLM_DIV_4) \ + || ((__VALUE__) == LL_RCC_PLLM_DIV_5) \ + || ((__VALUE__) == LL_RCC_PLLM_DIV_6) \ + || ((__VALUE__) == LL_RCC_PLLM_DIV_7) \ + || ((__VALUE__) == LL_RCC_PLLM_DIV_8)) + +#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) + +#define IS_LL_UTILS_PLLR_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLR_DIV_2) \ + || ((__VALUE__) == LL_RCC_PLLR_DIV_3) \ + || ((__VALUE__) == LL_RCC_PLLR_DIV_4) \ + || ((__VALUE__) == LL_RCC_PLLR_DIV_5) \ + || ((__VALUE__) == LL_RCC_PLLR_DIV_6) \ + || ((__VALUE__) == LL_RCC_PLLR_DIV_7) \ + || ((__VALUE__) == LL_RCC_PLLR_DIV_8)) + +#define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__) ((UTILS_PLLVCO_INPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX)) + +#define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX)) + +#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((__VALUE__) <= UTILS_MAX_FREQUENCY) + +#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ + || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) + +#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Functions UTILS Private functions + * @{ + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +static ErrorStatus UTILS_PLL_IsBusy(void); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UTILS_LL_EF_DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source to have 1ms time base. + * @note When a RTOS is used, it is recommended to avoid changing the Systick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param HCLKFrequency HCLK frequency in Hz + * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq + * @retval None + */ +void LL_Init1msTick(uint32_t HCLKFrequency) +{ + /* Use frequency provided in argument */ + LL_InitTick(HCLKFrequency, 1000U); +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on SysTick counter flag + * @note When a RTOS is used, it is recommended to avoid using blocking delay + * and use rather osDelay service. + * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which + * will configure Systick to 1ms + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +void LL_mDelay(uint32_t Delay) +{ + __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ + uint32_t tmpDelay; /* MISRAC2012-Rule-17.8 */ + /* Add this code to indicate that local variable is not used */ + ((void)tmp); + tmpDelay = Delay; + /* Add a period to guaranty minimum wait */ + if (tmpDelay < LL_MAX_DELAY) + { + tmpDelay ++; + } + + while (tmpDelay != 0U) + { + if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) + { + tmpDelay --; + } + } +} + +/** + * @} + */ + +/** @addtogroup UTILS_EF_SYSTEM + * @brief System Configuration functions + * + @verbatim + =============================================================================== + ##### System Configuration functions ##### + =============================================================================== + [..] + System, AHB and APB buses clocks configuration + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 is 64000000 Hz. + @endverbatim + @internal + Depending on the device voltage range, the maximum frequency should be + adapted accordingly: + + (++) Table 1. HCLK clock frequency. + (++) +-------------------------------------------------------+ + (++) | Latency | HCLK clock frequency (MHz) | + (++) | |-------------------------------------| + (++) | | voltage range 1 | voltage range 2 | + (++) | | 1.08V - 1.32V | 0.9 V - 1.10V | + (++) |-----------------|------------------|------------------| + (++) |0WS(1 CPU cycles)| HCLK <= 24 | HCLK <= 8 | + (++) |-----------------|------------------|------------------| + (++) |1WS(2 CPU cycles)| HCLK <= 48 | HCLK <= 16 | + (++) |-----------------|------------------|------------------| + (++) |2WS(3 CPU cycles)| HCLK <= 64 | - | + (++) |-----------------|------------------|------------------| + + @endinternal + * @{ + */ + +/** + * @brief This function sets directly SystemCoreClock CMSIS variable. + * @note Variable can be calculated also through SystemCoreClockUpdate function. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @retval None + */ +void LL_SetSystemCoreClock(uint32_t HCLKFrequency) +{ + /* HCLK clock frequency */ + SystemCoreClock = HCLKFrequency; +} + +/** + * @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLR) + * - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = HSI frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLR: ensure that max frequency at 64000000 Hz is reach (PLLVCO_output / PLLR) + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status; + uint32_t pllfreq; + + /* Check if one of the PLL is enabled */ + if (UTILS_PLL_IsBusy() == SUCCESS) + { + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); + + /* Enable HSI if not enabled */ + if (LL_RCC_HSI_IsReady() != 1U) + { + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + { + /* Wait for HSI ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, + UTILS_PLLInitStruct->PLLR); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @brief This function configures system clock with HSE as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLR) + * - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = HSE frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLR: ensure that max frequency at 64000000 Hz is reached (PLLVCO_output / PLLR) + * @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 48000000 + * @param HSEBypass This parameter can be one of the following values: + * @arg @ref LL_UTILS_HSEBYPASS_ON + * @arg @ref LL_UTILS_HSEBYPASS_OFF + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status; + uint32_t pllfreq; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); + assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); + + /* Check if one of the PLL is enabled */ + if (UTILS_PLL_IsBusy() == SUCCESS) + { + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); + + /* Enable HSE if not enabled */ + if (LL_RCC_HSE_IsReady() != 1U) + { + /* Check if need to enable HSE bypass feature or not */ + if (HSEBypass == LL_UTILS_HSEBYPASS_ON) + { + LL_RCC_HSE_EnableBypass(); + } + else + { + LL_RCC_HSE_DisableBypass(); + } + + /* Enable HSE */ + LL_RCC_HSE_Enable(); + while (LL_RCC_HSE_IsReady() != 1U) + { + /* Wait for HSE ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, + UTILS_PLLInitStruct->PLLR); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @brief Update number of Flash wait states in line with new frequency and current + * voltage range. + * @param HCLKFrequency HCLK frequency + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Latency has been modified + * - ERROR: Latency cannot be modified + */ +ErrorStatus LL_SetFlashLatency(uint32_t HCLKFrequency) +{ + uint32_t timeout; + uint32_t getlatency; + uint32_t latency; + ErrorStatus status; + + /* Frequency cannot be equal to 0 or greater than max clock */ + if ((HCLKFrequency == 0U) || (HCLKFrequency > UTILS_SCALE1_LATENCY3_FREQ)) + { + status = ERROR; + } + else + { + if (HCLKFrequency > UTILS_SCALE1_LATENCY2_FREQ) + { + /* 48 < HCLK <= 64 => 2WS (3 CPU cycles) */ + latency = LL_FLASH_LATENCY_2; + } + else + { + if (HCLKFrequency > UTILS_SCALE1_LATENCY1_FREQ) + { + /* 24 < HCLK <= 48 => 1WS (2 CPU cycles) */ + latency = LL_FLASH_LATENCY_1; + } + else + { + /* else HCLKFrequency < 24MHz default LL_FLASH_LATENCY_0 0WS */ + latency = LL_FLASH_LATENCY_0; + } + } + + LL_FLASH_SetLatency(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + timeout = 2u; + do + { + /* Wait for Flash latency to be updated */ + getlatency = LL_FLASH_GetLatency(); + timeout--; + } while ((getlatency != latency) && (timeout > 0u)); + + if(getlatency != latency) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UTILS_LL_Private_Functions + * @{ + */ + +/** + * @brief Function to check that PLL can be modified + * @param PLL_InputFrequency PLL input frequency (in Hz) + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @retval PLL output frequency (in Hz) + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) +{ + uint32_t pllfreq; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); + assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); + assert_param(IS_LL_UTILS_PLLR_VALUE(UTILS_PLLInitStruct->PLLR)); + + /* Check different PLL parameters according to RM */ + /* - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz. */ + pllfreq = PLL_InputFrequency / (((UTILS_PLLInitStruct->PLLM >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq)); + + /* - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz.*/ + pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN & (RCC_PLLCFGR_PLLN >> RCC_PLLCFGR_PLLN_Pos)); + assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq)); + + /* - PLLR: ensure that max frequency at 64000000 Hz is reached */ + pllfreq = pllfreq / (((UTILS_PLLInitStruct->PLLR >> RCC_PLLCFGR_PLLR_Pos) + 1U)); + assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq)); + + return pllfreq; +} + +/** + * @brief Function to check that PLL can be modified + * @retval An ErrorStatus enumeration value: + * - SUCCESS: PLL modification can be done + * - ERROR: PLL is busy + */ +static ErrorStatus UTILS_PLL_IsBusy(void) +{ + ErrorStatus status = SUCCESS; + + /* Check if PLL is busy*/ + if (LL_RCC_PLL_IsReady() != 0U) + { + /* PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @brief Function to enable PLL and switch system clock to PLL + * @param SYSCLK_Frequency SYSCLK frequency + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: No problem to switch system to PLL + * - ERROR: Problem to switch system to PLL + */ +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t hclk_frequency; + + assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider)); + assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); + + /* Calculate HCLK frequency */ + hclk_frequency = __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider); + + /* Increasing the number of wait states because of higher CPU frequency */ + if (SystemCoreClock < hclk_frequency) + { + /* Set FLASH latency to highest latency */ + status = LL_SetFlashLatency(hclk_frequency); + } + + /* Update system clock configuration */ + if (status == SUCCESS) + { + /* Enable PLL */ + LL_RCC_PLL_Enable(); + LL_RCC_PLL_EnableDomain_SYS(); + while (LL_RCC_PLL_IsReady() != 1U) + { + /* Wait for PLL ready */ + } + + /* Sysclk activation on the main PLL */ + LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider); + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) + { + /* Wait for system clock switch to PLL */ + } + + /* Set APB1 & APB2 prescaler*/ + LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (SystemCoreClock > hclk_frequency) + { + /* Set FLASH latency to lowest latency */ + status = LL_SetFlashLatency(hclk_frequency); + } + + /* Update SystemCoreClock variable */ + if (status == SUCCESS) + { + LL_SetSystemCoreClock(hclk_frequency); + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/FreeRTOSConfig.h b/USB-PD_Provider_1port/Inc/FreeRTOSConfig.h new file mode 100644 index 0000000..e24a2ae --- /dev/null +++ b/USB-PD_Provider_1port/Inc/FreeRTOSConfig.h @@ -0,0 +1,115 @@ +/* USER CODE BEGIN Header */ +/* + * FreeRTOS Kernel V10.3.1 + * Portion Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * Portion Copyright (C) 2019 StMicroelectronics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ +/* USER CODE END Header */ + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * These parameters and more are described within the 'configuration' section of the + * FreeRTOS API documentation available on the FreeRTOS.org web site. + * + * See http://www.freertos.org/a00110.html + *----------------------------------------------------------*/ + +/* USER CODE BEGIN Includes */ +/* Section where include file can be added */ +/* USER CODE END Includes */ + +/* Ensure definitions are only used by the compiler, and not by the assembler. */ +#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__) + #include + extern uint32_t SystemCoreClock; + void xPortSysTickHandler(void); +#endif +#define configENABLE_FPU 0 +#define configENABLE_MPU 0 + +#define configUSE_PREEMPTION 1 +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configCPU_CLOCK_HZ ( SystemCoreClock ) +#define configTICK_RATE_HZ ((TickType_t)1000) +#define configMAX_PRIORITIES ( 7 ) +#define configMINIMAL_STACK_SIZE ((uint16_t)128) +#define configTOTAL_HEAP_SIZE ((size_t)5000) +#define configMAX_TASK_NAME_LEN ( 16 ) +#define configUSE_16_BIT_TICKS 0 +#define configUSE_MUTEXES 1 +#define configQUEUE_REGISTRY_SIZE 8 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */ +/* Defaults to size_t for backward compatibility, but can be changed + if lengths will always be less than the number of bytes in a size_t. */ +#define configMESSAGE_BUFFER_LENGTH_TYPE size_t +/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */ + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) + +/* Set the following definitions to 1 to include the API function, or zero +to exclude the API function. */ +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 0 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 0 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 1 + +/* Normal assert() semantics without relying on the provision of an assert.h +header file. */ +/* USER CODE BEGIN 1 */ +#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );} +/* USER CODE END 1 */ + +/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS +standard names. */ +#define vPortSVCHandler SVC_Handler +#define xPortPendSVHandler PendSV_Handler + +/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick, + to prevent overwriting SysTick_Handler defined within STM32Cube HAL */ + +/* #define xPortSysTickHandler SysTick_Handler */ + +/* USER CODE BEGIN Defines */ +/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */ +/* USER CODE END Defines */ + +#endif /* FREERTOS_CONFIG_H */ diff --git a/USB-PD_Provider_1port/Inc/main.h b/USB-PD_Provider_1port/Inc/main.h new file mode 100644 index 0000000..ccb6526 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/main.h @@ -0,0 +1,112 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" +#include "stm32g0xx_ll_dma.h" +#include "stm32g0xx_ll_rcc.h" +#include "stm32g0xx_ll_bus.h" +#include "stm32g0xx_ll_crs.h" +#include "stm32g0xx_ll_system.h" +#include "stm32g0xx_ll_exti.h" +#include "stm32g0xx_ll_cortex.h" +#include "stm32g0xx_ll_utils.h" +#include "stm32g0xx_ll_pwr.h" +#include "stm32g0xx_ll_ucpd.h" +#include "stm32g0xx_ll_usart.h" +#include "stm32g0xx_ll_gpio.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define USBPD_FW_VERSION 0x16092020 +#define VCONN_EN2_Pin LL_GPIO_PIN_9 +#define VCONN_EN2_GPIO_Port GPIOB +#define V_CTL1_Pin LL_GPIO_PIN_2 +#define V_CTL1_GPIO_Port GPIOC +#define VSENSE_2_Pin LL_GPIO_PIN_3 +#define VSENSE_2_GPIO_Port GPIOA +#define VCONN_DISCHARGE2_Pin LL_GPIO_PIN_0 +#define VCONN_DISCHARGE2_GPIO_Port GPIOB +#define VSENSE_1_Pin LL_GPIO_PIN_10 +#define VSENSE_1_GPIO_Port GPIOB +#define VSENSE_DCDC_Pin LL_GPIO_PIN_11 +#define VSENSE_DCDC_GPIO_Port GPIOB +#define ISENSE_2_Pin LL_GPIO_PIN_12 +#define ISENSE_2_GPIO_Port GPIOB +#define VBUS_DISCHARGE1_Pin LL_GPIO_PIN_13 +#define VBUS_DISCHARGE1_GPIO_Port GPIOB +#define VBUS_DISCHARGE2_Pin LL_GPIO_PIN_14 +#define VBUS_DISCHARGE2_GPIO_Port GPIOB +#define SOURCE_EN_Pin LL_GPIO_PIN_3 +#define SOURCE_EN_GPIO_Port GPIOD +#define VCONN_EN1_Pin LL_GPIO_PIN_4 +#define VCONN_EN1_GPIO_Port GPIOD +void MX_GPIO_Init(void); +void MX_DMA_Init(void); +void MX_UCPD1_Init(void); +void MX_ADC1_Init(void); +void MX_USART3_UART_Init(void); +void MX_LPTIM1_Init(void); +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/stm32_assert.h b/USB-PD_Provider_1port/Inc/stm32_assert.h new file mode 100644 index 0000000..ca09699 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/stm32_assert.h @@ -0,0 +1,53 @@ +/** + ****************************************************************************** + * @file stm32_assert.h + * @brief STM32 assert file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32_ASSERT_H +#define __STM32_ASSERT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Includes ------------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32_ASSERT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/stm32g0xx_hal_conf.h b/USB-PD_Provider_1port/Inc/stm32g0xx_hal_conf.h new file mode 100644 index 0000000..abc7603 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/stm32g0xx_hal_conf.h @@ -0,0 +1,352 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CONF_H +#define STM32G0xx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +#define HAL_LPTIM_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 1u +#define USE_HAL_CEC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u +#define USE_HAL_HCD_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_I2S_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_PCD_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ +#endif + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S1 peripheral + * This value is used by the RCC HAL module to compute the I2S1 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S1_CLOCK_VALUE) +#define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/ +#endif /* EXTERNAL_I2S1_CLOCK_VALUE */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief External clock source for I2S2 peripheral + * This value is used by the RCC HAL module to compute the I2S2 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S2_CLOCK_VALUE) + #define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/ +#endif /* EXTERNAL_I2S2_CLOCK_VALUE */ +#endif + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 3U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include modules header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32g0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32g0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32g0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32g0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32g0xx_hal_adc.h" +#include "stm32g0xx_hal_adc_ex.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32g0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32g0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32g0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32g0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32g0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32g0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32g0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32g0xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32g0xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32g0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32g0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32g0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32g0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32g0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32g0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32g0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32g0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32g0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32g0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32g0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32g0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32g0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32g0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32g0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32g0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/stm32g0xx_it.h b/USB-PD_Provider_1port/Inc/stm32g0xx_it.h new file mode 100644 index 0000000..85ed677 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/stm32g0xx_it.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32G0xx_IT_H +#define __STM32G0xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void SysTick_Handler(void); +void USB_UCPD1_2_IRQHandler(void); +void DMA1_Channel1_IRQHandler(void); +void DMA1_Channel2_3_IRQHandler(void); +void DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler(void); +void ADC1_COMP_IRQHandler(void); +void USART3_4_5_6_LPUART1_IRQHandler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32G0xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/tracer_emb_conf.h b/USB-PD_Provider_1port/Inc/tracer_emb_conf.h new file mode 100644 index 0000000..cabbff6 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/tracer_emb_conf.h @@ -0,0 +1,95 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file tracer_emb_conf.h + * @author MCD Application Team + * @brief This file contains the Trace HW related defines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* CubeMX Generated */ +#define CUBEMX_GENERATED + +#ifndef TRACER_EMB_CONF_H +#define TRACER_EMB_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_bus.h" +#include "stm32g0xx_ll_dma.h" +#include "stm32g0xx_ll_gpio.h" +#include "stm32g0xx_ll_rcc.h" +#include "stm32g0xx_ll_usart.h" +/* Private typedef -----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ----------------------------------------------------------------------------- + Definitions for TRACE feature +-------------------------------------------------------------------------------*/ + +#define TRACER_EMB_BAUDRATE 921600UL + +#define TRACER_EMB_DMA_MODE 1UL +#define TRACER_EMB_IT_MODE 0UL + +#define TRACER_EMB_BUFFER_SIZE 1024UL + +/* ----------------------------------------------------------------------------- + Definitions for TRACE Hw information +-------------------------------------------------------------------------------*/ + +#define TRACER_EMB_IS_INSTANCE_LPUART_TYPE 0UL /* set to 0UL if USART is used */ + +#define TRACER_EMB_USART_INSTANCE USART3 + +#define TRACER_EMB_TX_GPIO GPIOC +#define TRACER_EMB_TX_PIN LL_GPIO_PIN_10 +#define TRACER_EMB_TX_AF LL_GPIO_AF_0 +#define TRACER_EMB_TX_GPIO_ENABLE_CLOCK() LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOC) +#define TRACER_EMB_RX_GPIO GPIOC +#define TRACER_EMB_RX_PIN LL_GPIO_PIN_11 +#define TRACER_EMB_RX_AF LL_GPIO_AF_0 +#define TRACER_EMB_RX_GPIO_ENABLE_CLOCK() LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOC) + +#define TRACER_EMB_ENABLE_CLK_USART() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3) +#define TRACER_EMB_DISABLE_CLK_USART() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_USART3) +#define TRACER_EMB_SET_CLK_SOURCE_USART() /* No need for clock source selection in case of USART3 // LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK2) */ +#define TRACER_EMB_USART_IRQ USART3_4_5_6_LPUART1_IRQn +#define TRACER_EMB_USART_IRQHANDLER USART3_4_5_6_LPUART1_IRQHandler +#define TRACER_EMB_TX_AF_FUNCTION LL_GPIO_SetAFPin_8_15 +#define TRACER_EMB_RX_AF_FUNCTION LL_GPIO_SetAFPin_8_15 + +#define TRACER_EMB_DMA_INSTANCE DMA1 +#define TRACER_EMB_ENABLE_CLK_DMA() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) +#define TRACER_EMB_TX_DMA_REQUEST LL_DMAMUX_REQ_USART3_TX +#define TRACER_EMB_TX_DMA_CHANNEL LL_DMA_CHANNEL_7 +#define TRACER_EMB_ENABLECHANNEL LL_DMA_EnableChannel +#define TRACER_EMB_DISABLECHANNEL LL_DMA_DisableChannel +#define TRACER_EMB_TX_DMA_IRQ DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn +#define TRACER_EMB_TX_DMA_IRQHANDLER DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler +#define TRACER_EMB_TX_DMA_ACTIVE_FLAG LL_DMA_IsActiveFlag_TC7 +#define TRACER_EMB_TX_DMA_CLEAR_FLAG LL_DMA_ClearFlag_GI7 + +#ifdef __cplusplus +} +#endif + +#endif /* TRACER_EMB_CONF_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd.h b/USB-PD_Provider_1port/Inc/usbpd.h new file mode 100644 index 0000000..f487f22 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd.h @@ -0,0 +1,61 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd.h + * @author MCD Application Team + * @brief This file contains the device define. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __usbpd_H +#define __usbpd_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_core.h" +#include "usbpd_dpm_core.h" +#include "usbpd_dpm_conf.h" +#include "usbpd_hw_if.h" + +/* USER CODE BEGIN 0 */ +/* USER CODE END 0 */ + +/* Global variables ---------------------------------------------------------*/ + +/* USER CODE BEGIN 1 */ +/* USER CODE END 1 */ + +/* USBPD init function */ +void MX_USBPD_Init(void); + +/* USER CODE BEGIN 2 */ +/* USER CODE END 2 */ + +#ifdef __cplusplus +} +#endif +#endif /*__usbpd_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_devices_conf.h b/USB-PD_Provider_1port/Inc/usbpd_devices_conf.h new file mode 100644 index 0000000..fce39f7 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_devices_conf.h @@ -0,0 +1,128 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_devices_conf.h + * @author MCD Application Team + * @brief This file contains the device define. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* CubeMX Generated */ +#define CUBEMX_GENERATED + +#ifndef USBPD_DEVICE_CONF_H +#define USBPD_DEVICE_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_bus.h" +#include "stm32g0xx_ll_dma.h" +#include "stm32g0xx_ll_gpio.h" +#include "stm32g0xx_ll_rcc.h" +#include "stm32g0xx_ll_ucpd.h" +#include "stm32g0xx_ll_pwr.h" +#include "stm32g0xx_ll_tim.h" +#include "usbpd_pwr_user.h" +#include "usbpd_pwr_if.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ----------------------------------------------------------------------------- + usbpd_hw.c +-------------------------------------------------------------------------------*/ + +/* defined used to configure function : BSP_USBPD_GetUSPDInstance */ +#define UCPD_INSTANCE0 UCPD1 + +/* defined used to configure function : BSP_USBPD_Init_DMARxInstance,BSP_USBPD_DeInit_DMARxInstance */ +#define UCPDDMA_INSTANCE0_CLOCKENABLE_RX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) + +#define UCPDDMA_INSTANCE0_DMA_RX DMA1 + +#define UCPDDMA_INSTANCE0_REQUEST_RX DMA_REQUEST_UCPD1_RX + +#define UCPDDMA_INSTANCE0_LL_CHANNEL_RX LL_DMA_CHANNEL_4 + +#define UCPDDMA_INSTANCE0_CHANNEL_RX DMA1_Channel4 + +/* defined used to configure function : BSP_USBPD_Init_DMATxInstance, BSP_USBPD_DeInit_DMATxInstance */ +#define UCPDDMA_INSTANCE0_CLOCKENABLE_TX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) + +#define UCPDDMA_INSTANCE0_DMA_TX DMA1 + +#define UCPDDMA_INSTANCE0_REQUEST_TX DMA_REQUEST_UCPD1_TX + +#define UCPDDMA_INSTANCE0_LL_CHANNEL_TX LL_DMA_CHANNEL_2 + +#define UCPDDMA_INSTANCE0_CHANNEL_TX DMA1_Channel2 + +/* defined used to configure BSP_USBPD_SetFRSSignalling */ +#define UCPDFRS_INSTANCE0_FRSCC1 +#define UCPDFRS_INSTANCE0_FRSCC2 + +#define UCPD_INSTANCE0_ENABLEIRQ do{ \ + NVIC_SetPriority(USB_UCPD1_2_IRQn,0); \ + NVIC_EnableIRQ(USB_UCPD1_2_IRQn); \ + } while(0) + +/* ----------------------------------------------------------------------------- + Definitions for timer service feature +-------------------------------------------------------------------------------*/ + +#define TIMX TIM1 +#define TIMX_CLK_ENABLE LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM1) +#define TIMX_CLK_DISABLE LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM1) +#define TIMX_IRQ TIM1_BRK_UP_TRG_COM_IRQn +#define TIMX_CHANNEL_CH1 LL_TIM_CHANNEL_CH1 +#define TIMX_CHANNEL_CH2 LL_TIM_CHANNEL_CH2 +#define TIMX_CHANNEL_CH3 LL_TIM_CHANNEL_CH3 +#define TIMX_CHANNEL_CH4 LL_TIM_CHANNEL_CH4 +#define TIMX_CHANNEL1_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH1(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC1(TIMX); \ + }while(0) +#define TIMX_CHANNEL2_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH2(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC2(TIMX); \ + }while(0) +#define TIMX_CHANNEL3_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH3(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC3(TIMX); \ + }while(0) +#define TIMX_CHANNEL4_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH4(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC4(TIMX); \ + }while(0) +#define TIMX_CHANNEL1_GETFLAG LL_TIM_IsActiveFlag_CC1 +#define TIMX_CHANNEL2_GETFLAG LL_TIM_IsActiveFlag_CC2 +#define TIMX_CHANNEL3_GETFLAG LL_TIM_IsActiveFlag_CC3 +#define TIMX_CHANNEL4_GETFLAG LL_TIM_IsActiveFlag_CC4 + +#ifdef __cplusplus + } +#endif + +#endif /* USBPD_DEVICE_CONF_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_dpm_conf.h b/USB-PD_Provider_1port/Inc/usbpd_dpm_conf.h new file mode 100644 index 0000000..0573f7a --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_dpm_conf.h @@ -0,0 +1,156 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_dpm_conf.h + * @author MCD Application Team + * @brief Header file for stack/application settings file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_DPM_CONF_H_ +#define __USBPD_DPM_CONF_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_pdo_defs.h" +#include "usbpd_dpm_user.h" +#include "usbpd_vdm_user.h" + +#include "gui_api.h" +#include "usbpd_gui_memmap.h" + +/* USER CODE BEGIN Includes */ +/* Section where include file can be added */ + +/* USER CODE END Includes */ + +/* Define ------------------------------------------------------------------*/ +/* Define VID, PID,... manufacturer parameters */ +#define USBPD_VID (0x0483u) /*!< Vendor ID (assigned by the USB-IF) */ +#define USBPD_PID (0x0002u) /*!< Product ID (assigned by the manufacturer) */ +#define USBPD_XID (0xF0000003u) /*!< Value provided by the USB-IF assigned to the product */ + +/* USER CODE BEGIN Define */ +/* Section where Define can be added */ + +/* USER CODE END Define */ + +/* Exported typedef ----------------------------------------------------------*/ +/* USER CODE BEGIN Typedef */ +/* Section where Typedef can be added */ + +/* USER CODE END Typedef */ + +/* Private variables ---------------------------------------------------------*/ +#ifndef __USBPD_DPM_CORE_C +extern USBPD_SettingsTypeDef DPM_Settings[USBPD_PORT_COUNT]; +extern USBPD_IdSettingsTypeDef DPM_ID_Settings[USBPD_PORT_COUNT]; +extern USBPD_USER_SettingsTypeDef DPM_USER_Settings[USBPD_PORT_COUNT]; +#else /* __USBPD_DPM_CORE_C */ +USBPD_SettingsTypeDef DPM_Settings[USBPD_PORT_COUNT] = +{ + { + .PE_SupportedSOP = USBPD_SUPPORTED_SOP_SOP , /* Supported SOP : SOP, SOP' SOP" SOP'Debug SOP"Debug */ + .PE_SpecRevision = USBPD_SPECIFICATION_REV3,/* spec revision value */ + .PE_DefaultRole = USBPD_PORTPOWERROLE_SRC, /* Default port role */ + .PE_RoleSwap = USBPD_FALSE, /* support port role swap */ + .PE_VDMSupport = USBPD_FALSE, + .PE_RespondsToDiscovSOP = USBPD_FALSE, /*!< Can respond successfully to a Discover Identity */ + .PE_AttemptsDiscovSOP = USBPD_FALSE, /*!< Can send a Discover Identity */ + .PE_PingSupport = USBPD_FALSE, /* support Ping (only for PD3.0) */ + .PE_CapscounterSupport = USBPD_FALSE, /* support caps counter */ + .CAD_RoleToggle = USBPD_FALSE, /* CAD role toggle */ + .CAD_DefaultResistor = 0x00u, + .CAD_TryFeature = 0, /* CAD try feature */ + .CAD_AccesorySupport = USBPD_FALSE, /* CAD accessory support */ + .PE_PD3_Support.d = /*!< PD3 SUPPORT FEATURE */ + { + .PE_UnchunkSupport = USBPD_FALSE, /* support Unchunked mode (valid only spec revision 3.0) */ + .PE_FastRoleSwapSupport = USBPD_FALSE, /* support fast role swap only spec revsion 3.0 */ + .Is_GetPPSStatus_Supported = USBPD_FALSE, /*!< PPS message NOT supported by PE stack */ + .Is_SrcCapaExt_Supported = USBPD_FALSE, /*!< Source_Capabilities_Extended message supported or not by DPM */ + .Is_Alert_Supported = USBPD_FALSE, /*!< Alert message supported or not by DPM */ + .Is_GetStatus_Supported = USBPD_FALSE, /*!< Status message supported or not by DPM (Is_Alert_Supported should be enabled) */ + .Is_GetManufacturerInfo_Supported = USBPD_FALSE, /*!< Manufacturer_Info message supported or not by DPM */ + .Is_GetCountryCodes_Supported = USBPD_FALSE, /*!< Country_Codes message supported or not by DPM */ + .Is_GetCountryInfo_Supported = USBPD_FALSE, /*!< Country_Info message supported or not by DPM */ + .Is_SecurityRequest_Supported = USBPD_FALSE, /*!< Security_Response message supported or not by DPM */ + .Is_FirmUpdateRequest_Supported = USBPD_FALSE, /*!< Firmware update response message supported by PE */ + .Is_GetBattery_Supported = USBPD_FALSE, /*!< Get Battery Capabitity and Status messages supported by PE */ + }, + + .CAD_SRCToggleTime = 0, /* uint8_t CAD_SRCToggleTime; */ + .CAD_SNKToggleTime = 0, /* uint8_t CAD_SNKToggleTime; */ + } +}; + +USBPD_IdSettingsTypeDef DPM_ID_Settings[USBPD_PORT_COUNT] = +{ + { + .XID = USBPD_XID, /*!< Value provided by the USB-IF assigned to the product */ + .VID = USBPD_VID, /*!< Vendor ID (assigned by the USB-IF) */ + .PID = USBPD_PID, /*!< Product ID (assigned by the manufacturer) */ + }, +}; + +USBPD_USER_SettingsTypeDef DPM_USER_Settings[USBPD_PORT_COUNT] = +{ + { + .PE_DataSwap = USBPD_FALSE, /* support data swap */ + .PE_VconnSwap = USBPD_FALSE, /* support VCONN swap */ + .PE_DR_Swap_To_DFP = USBPD_TRUE, /* Support of DR Swap to DFP */ + .PE_DR_Swap_To_UFP = USBPD_TRUE, /* Support of DR Swap to UFP */ +#if defined(USBPD_REV30_SUPPORT) +#if _MANU_INFO + .DPM_ManuInfoPort = /*!< Manufacturer information used for the port */ + { + .VID = USBPD_VID, /*!< Vendor ID (assigned by the USB-IF) */ + .PID = USBPD_PID, /*!< Product ID (assigned by the manufacturer) */ + .ManuString = "STMicroelectronics", /*!< Vendor defined byte array */ + }, +#endif /* _MANU_INFO */ +#endif /* USBPD_REV30_SUPPORT */ + }, +}; + +#endif /* !__USBPD_DPM_CORE_C */ + +/* USER CODE BEGIN Variable */ +/* Section where Variable can be added */ + +/* USER CODE END Variable */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN Constant */ +/* Section where Constant can be added */ + +/* USER CODE END Constant */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ +/* Section where Macro can be added */ + +/* USER CODE END Macro */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_DPM_CONF_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_dpm_core.h b/USB-PD_Provider_1port/Inc/usbpd_dpm_core.h new file mode 100644 index 0000000..847ff27 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_dpm_core.h @@ -0,0 +1,76 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_dpm_core.h + * @author MCD Application Team + * @brief Header file for usbpd_dpm_core.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_DPM_CORE_H_ +#define __USBPD_DPM_CORE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported typedef ----------------------------------------------------------*/ +/* USER CODE BEGIN typedef */ + +/* USER CODE END typedef */ + +/* Exported define -----------------------------------------------------------*/ + +/* USER CODE BEGIN define */ + +/* USER CODE END define */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN constants */ + +/* USER CODE END constants */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN macro */ + +/* USER CODE END macro */ + +/* Exported variables --------------------------------------------------------*/ +extern USBPD_ParamsTypeDef DPM_Params[USBPD_PORT_COUNT]; +/* USER CODE BEGIN variables */ + +/* USER CODE END variables */ + +/* Exported functions --------------------------------------------------------*/ +USBPD_StatusTypeDef USBPD_DPM_InitCore(void); +USBPD_StatusTypeDef USBPD_DPM_InitOS(void); +void USBPD_DPM_Run(void); +void USBPD_DPM_TimerCounter(void); +/* USER CODE BEGIN functions */ + +/* USER CODE END functions */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_DPM_CORE_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_dpm_user.h b/USB-PD_Provider_1port/Inc/usbpd_dpm_user.h new file mode 100644 index 0000000..429a00b --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_dpm_user.h @@ -0,0 +1,172 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_dpm_user.h + * @author MCD Application Team + * @brief Header file for usbpd_dpm_user.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_DPM_USER_H_ +#define __USBPD_DPM_USER_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* USER CODE BEGIN Include */ + +/* USER CODE END Include */ + +/** @addtogroup STM32_USBPD_APPLICATION + * @{ + */ + +/** @addtogroup STM32_USBPD_APPLICATION_DPM_USER + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/* USER CODE BEGIN Typedef */ +typedef struct +{ + uint32_t DPM_RDOPosition; /*!< RDO Position of requested DO in Source list of capabilities */ + uint32_t DPM_RDOPositionPrevious; /*!< RDO Position of requested DO in Source list of capabilities */ + uint32_t DPM_RequestedVoltage; /*!< Value of requested voltage */ + uint32_t DPM_RequestedCurrent; /*!< Value of requested current */ + uint32_t DPM_RcvRequestDOMsg; +} USBPD_HandleTypeDef; +/* USER CODE END Typedef */ + +typedef void (*GUI_NOTIFICATION_POST)(uint8_t PortNum, uint16_t EventVal); +typedef uint32_t (*GUI_NOTIFICATION_FORMAT_SEND)(uint32_t PortNum, uint32_t TypeNotification, uint32_t Value); +typedef void (*GUI_SAVE_INFO)(uint8_t PortNum, uint8_t DataId, uint8_t *Ptr, uint32_t Size); +/* Exported define -----------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN Constant */ + +/* USER CODE END Constant */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Exported variables --------------------------------------------------------*/ +/* USER CODE BEGIN Private_Variables */ +extern USBPD_HandleTypeDef DPM_Ports[USBPD_PORT_COUNT]; +/* USER CODE END Private_Variables */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USBPD_USER_EXPORTED_FUNCTIONS + * @{ + */ +/** @addtogroup USBPD_USER_EXPORTED_FUNCTIONS_GROUP1 + * @{ + */ +USBPD_StatusTypeDef USBPD_DPM_UserInit(void); +void USBPD_DPM_SetNotification_GUI(GUI_NOTIFICATION_FORMAT_SEND PtrFormatSend, GUI_NOTIFICATION_POST PtrPost, GUI_SAVE_INFO PtrSaveInfo); +void USBPD_DPM_UserCableDetection(uint8_t PortNum, USBPD_CAD_EVENT State); +void USBPD_DPM_UserTimerCounter(uint8_t PortNum); + +/** + * @} + */ + +/** @addtogroup USBPD_USER_EXPORTED_FUNCTIONS_GROUP2 + * @{ + */ +USBPD_StatusTypeDef USBPD_DPM_SetupNewPower(uint8_t PortNum); +void USBPD_DPM_HardReset(uint8_t PortNum, USBPD_PortPowerRole_TypeDef CurrentRole, USBPD_HR_Status_TypeDef Status); +void USBPD_DPM_Notification(uint8_t PortNum, USBPD_NotifyEventValue_TypeDef EventVal); +void USBPD_DPM_ExtendedMessageReceived(uint8_t PortNum, USBPD_ExtendedMsg_TypeDef MsgType, uint8_t *ptrData, uint16_t DataSize); +void USBPD_DPM_GetDataInfo(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId , uint8_t *Ptr, uint32_t *Size); +void USBPD_DPM_SetDataInfo(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId , uint8_t *Ptr, uint32_t Size); +USBPD_StatusTypeDef USBPD_DPM_EvaluateRequest(uint8_t PortNum, USBPD_CORE_PDO_Type_TypeDef *PtrPowerObject); +USBPD_StatusTypeDef USBPD_DPM_EvaluateVconnSwap(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_PE_VconnPwr(uint8_t PortNum, USBPD_FunctionalState State); +USBPD_StatusTypeDef USBPD_DPM_EvaluateDataRoleSwap(uint8_t PortNum); +USBPD_FunctionalState USBPD_DPM_IsPowerReady(uint8_t PortNum, USBPD_VSAFE_StatusTypeDef Vsafe); + +/** + * @} + */ + +/** @addtogroup USBPD_USER_EXPORTED_FUNCTIONS_GROUP3 + * @{ + */ +USBPD_StatusTypeDef USBPD_DPM_RequestHardReset(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestCableReset(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestGotoMin(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestPing(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestMessageRequest(uint8_t PortNum, uint8_t IndexSrcPDO, uint16_t RequestedVoltage); +USBPD_StatusTypeDef USBPD_DPM_RequestGetSourceCapability(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestGetSinkCapability(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestDataRoleSwap(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestPowerRoleSwap(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestVconnSwap(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestSoftReset(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType); +USBPD_StatusTypeDef USBPD_DPM_RequestSourceCapability(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestVDM_DiscoveryIdentify(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType); +USBPD_StatusTypeDef USBPD_DPM_RequestVDM_DiscoverySVID(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType); +USBPD_StatusTypeDef USBPD_DPM_RequestVDM_DiscoveryMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID); +USBPD_StatusTypeDef USBPD_DPM_RequestVDM_EnterMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint8_t ModeIndex); +USBPD_StatusTypeDef USBPD_DPM_RequestVDM_ExitMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint8_t ModeIndex); +USBPD_StatusTypeDef USBPD_DPM_RequestDisplayPortStatus(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint32_t *pDPStatus); +USBPD_StatusTypeDef USBPD_DPM_RequestDisplayPortConfig(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint32_t *pDPConfig); +USBPD_StatusTypeDef USBPD_DPM_RequestAttention(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID); +USBPD_StatusTypeDef USBPD_DPM_RequestAlert(uint8_t PortNum, USBPD_ADO_TypeDef Alert); +USBPD_StatusTypeDef USBPD_DPM_RequestGetSourceCapabilityExt(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestGetSinkCapabilityExt(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestGetManufacturerInfo(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint8_t* pManuInfoData); +USBPD_StatusTypeDef USBPD_DPM_RequestGetStatus(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestFastRoleSwap(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestGetPPS_Status(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestGetCountryCodes(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_DPM_RequestGetCountryInfo(uint8_t PortNum, uint16_t CountryCode); +USBPD_StatusTypeDef USBPD_DPM_RequestGetBatteryCapability(uint8_t PortNum, uint8_t *pBatteryCapRef); +USBPD_StatusTypeDef USBPD_DPM_RequestGetBatteryStatus(uint8_t PortNum, uint8_t *pBatteryStatusRef); +USBPD_StatusTypeDef USBPD_DPM_RequestSecurityRequest(uint8_t PortNum); +/* USER CODE BEGIN Function */ + +/* USER CODE END Function */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_DPM_USER_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_gui_memmap.h b/USB-PD_Provider_1port/Inc/usbpd_gui_memmap.h new file mode 100644 index 0000000..886de2c --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_gui_memmap.h @@ -0,0 +1,106 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_gui_memmap.h + * @author MCD Application Team + * @brief This file contains memory mapping configuration to be able to run + * Cube-Monitor-UCPD on embedded side. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_GUI_MEMMAP_H_ +#define __USBPD_GUI_MEMMAP_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "usbpd_def.h" + +/** @addtogroup STM32_USBPD_APPLICATION + * @{ + */ + +/** @addtogroup STM32_USBPD_APPLICATION_GUI + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/* Exported define -----------------------------------------------------------*/ + +/* Following definitions should be adapted to used Flash configuration : + INDEX_PAGE : represents the number of the page used for storing USBPD settings (usually the last page) + ADDR_FLASH_LAST_PAGE : Flash address value of beginning of USBPD settings page + ADDR_FLASH_PAGE_END : Flash address value of end of USBPD settings page +*/ + +#if defined (FLASH_OPTR_DBANK) +#define INDEX_PAGE ((FLASH_PAGE_NB * 2U) - 1U) /* Index of latest page */ +#else +#define INDEX_PAGE (FLASH_PAGE_NB - 1U) /* Index of latest page */ +#endif /* FLASH_OPTR_DBANK */ +#define ADDR_FLASH_LAST_PAGE (FLASH_BASE + (INDEX_PAGE * FLASH_PAGE_SIZE)) /* Base @ of latest page */ +#define ADDR_FLASH_PAGE_END (ADDR_FLASH_LAST_PAGE + FLASH_PAGE_SIZE - 1U) + +#define GUI_FLASH_MAGIC_NUMBER ADDR_FLASH_LAST_PAGE +/* should be aligned on double word */ +#define GUI_FLASH_ADDR_NB_PDO_SNK_P0 (GUI_FLASH_MAGIC_NUMBER + 8u) +#define GUI_FLASH_ADDR_NB_PDO_SRC_P0 (GUI_FLASH_ADDR_NB_PDO_SNK_P0 + 1u) +#define GUI_FLASH_ADDR_NB_PDO_SNK_P1 (GUI_FLASH_ADDR_NB_PDO_SRC_P0 + 1u) +#define GUI_FLASH_ADDR_NB_PDO_SRC_P1 (GUI_FLASH_ADDR_NB_PDO_SNK_P1 + 1u) + +/* should be aligned on double word */ +#define GUI_FLASH_ADDR_PDO_SRC_P0 (GUI_FLASH_MAGIC_NUMBER + 16u) +/* New Address should be modulo 8 */ +/* New Address = (Previous Address + (size / 8 * 8) + ((size % 8) + 7) / 8 * 8) */ +#define GUI_FLASH_ADDR_PDO_SNK_P0 (GUI_FLASH_ADDR_PDO_SRC_P0 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 )) +#define GUI_FLASH_ADDR_PDO_SRC_P1 (GUI_FLASH_ADDR_PDO_SNK_P0 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 )) +#define GUI_FLASH_ADDR_PDO_SNK_P1 (GUI_FLASH_ADDR_PDO_SRC_P1 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 )) + +#define GUI_FLASH_ADDR_DPM_SETTINGS (GUI_FLASH_ADDR_PDO_SNK_P1 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 )) + +#define GUI_FLASH_ADDR_DPM_USER_SETTINGS (GUI_FLASH_ADDR_DPM_SETTINGS + (sizeof(USBPD_SettingsTypeDef) * USBPD_PORT_COUNT)) + +#define GUI_FLASH_ADDR_DPM_VDM_SETTINGS (GUI_FLASH_ADDR_DPM_USER_SETTINGS + (sizeof(USBPD_USER_SettingsTypeDef) * USBPD_PORT_COUNT)) + +#define GUI_FLASH_ADDR_DPM_ID_SETTINGS (GUI_FLASH_ADDR_DPM_VDM_SETTINGS + (sizeof(USBPD_VDM_SettingsTypeDef) * USBPD_PORT_COUNT)) + +#define GUI_FLASH_ADDR_RESERVED (GUI_FLASH_ADDR_DPM_ID_SETTINGS + (sizeof(USBPD_IdSettingsTypeDef) * USBPD_PORT_COUNT)) + +#define GUI_FLASH_SIZE_RESERVED (int32_t)(ADDR_FLASH_PAGE_END - GUI_FLASH_ADDR_RESERVED) + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_GUI_MEMMAP_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_pdo_defs.h b/USB-PD_Provider_1port/Inc/usbpd_pdo_defs.h new file mode 100644 index 0000000..cfc232c --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_pdo_defs.h @@ -0,0 +1,159 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_pdo_defs.h + * @author MCD Application Team + * @brief Header file for definition of PDO/APDO values for 2 ports(DRP/SNK) configuration + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_PDO_DEF_H_ +#define __USBPD_PDO_DEF_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "usbpd_def.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Define ------------------------------------------------------------------*/ +#define PORT0_NB_SOURCEPDO 1U /* Number of Source PDOs (applicable for port 0) */ +#define PORT0_NB_SINKPDO 0U /* Number of Sink PDOs (applicable for port 0) */ +#define PORT1_NB_SOURCEPDO 0U /* Number of Source PDOs (applicable for port 1) */ +#define PORT1_NB_SINKPDO 0U /* Number of Sink PDOs (applicable for port 1) */ + +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Exported typedef ----------------------------------------------------------*/ + +/* USER CODE BEGIN typedef */ + +/** + * @brief USBPD Port PDO Structure definition + * + */ +typedef struct +{ + uint32_t *ListOfPDO; /*!< Pointer on Power Data Objects list, defining + port capabilities */ + + uint8_t *NumberOfPDO; /*!< Number of Power Data Objects defined in ListOfPDO + This parameter must be set at max to @ref USBPD_MAX_NB_PDO value */ +} USBPD_PortPDO_TypeDef; + +/** + * @brief USBPD Port PDO Storage Structure definition + */ +typedef struct +{ + USBPD_PortPDO_TypeDef SourcePDO; /*!< SRC Power Data Objects */ +} USBPD_PWR_Port_PDO_Storage_TypeDef; +/* USER CODE END typedef */ + +/* Exported define -----------------------------------------------------------*/ + +/* USER CODE BEGIN Exported_Define */ + +#define USBPD_CORE_PDO_SRC_FIXED_MAX_CURRENT 3 +#define USBPD_CORE_PDO_SNK_FIXED_MAX_CURRENT 1500 + +/* USER CODE END Exported_Define */ + +/* Exported constants --------------------------------------------------------*/ + +/* USER CODE BEGIN constants */ + +/* USER CODE END constants */ + +/* Exported macro ------------------------------------------------------------*/ + +/* USER CODE BEGIN macro */ + +/* USER CODE END macro */ + +/* Exported variables --------------------------------------------------------*/ + +/* USER CODE BEGIN variables */ + +/* USER CODE END variables */ + +#ifndef __USBPD_PWR_IF_C +extern uint8_t USBPD_NbPDO[4]; +extern uint32_t PORT0_PDO_ListSRC[USBPD_MAX_NB_PDO]; +extern uint32_t PORT0_PDO_ListSNK[USBPD_MAX_NB_PDO]; +#else +uint8_t USBPD_NbPDO[4] = {(PORT0_NB_SINKPDO), + (PORT0_NB_SOURCEPDO)}; +/* Definition of Source PDO for Port 0 */ +uint32_t PORT0_PDO_ListSRC[USBPD_MAX_NB_PDO] = +{ + /* PDO 1 */ + (0x2201912CU), + /* PDO 2 */ + (0x00000000U), + /* PDO 3 */ + (0x00000000U), + /* PDO 4 */ + (0x00000000U), + /* PDO 5 */ + (0x00000000U), + /* PDO 6 */ + (0x00000000U), + /* PDO 7 */ + (0x00000000U) +}; + +/* Definition of Sink PDO for Port 0 */ +uint32_t PORT0_PDO_ListSNK[USBPD_MAX_NB_PDO] = +{ + /* PDO 1 */ + (0x00000000U), + /* PDO 2 */ + (0x00000000U), + /* PDO 3 */ + (0x00000000U), + /* PDO 4 */ + (0x00000000U), + /* PDO 5 */ + (0x00000000U), + /* PDO 6 */ + (0x00000000U), + /* PDO 7 */ + (0x00000000U) +}; + +#endif + +/* Exported functions --------------------------------------------------------*/ + +/* USER CODE BEGIN functions */ + +/* USER CODE END functions */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_PDO_DEF_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_pwr_if.h b/USB-PD_Provider_1port/Inc/usbpd_pwr_if.h new file mode 100644 index 0000000..1944427 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_pwr_if.h @@ -0,0 +1,223 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_pwr_if.h + * @author MCD Application Team + * @brief This file contains the headers of usbpd_pw_if.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_PW_IF_H_ +#define __USBPD_PW_IF_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_def.h" + +/** @addtogroup STM32_USBPD_APPLICATION + * @{ + */ + +/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/* Exported define -----------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USBPD_USER_PWR_IF_Exported_Macros USBPD PWR IF Exported Macros + * @{ + */ + +/* enumeration of the different power status available for VBUS */ +typedef enum{ + USBPD_PWR_BELOWVSAFE0V, + USBPD_PWR_VSAFE5V, + USBPD_PWR_SNKDETACH +} USBPD_VBUSPOWER_STATUS; + +/* Macros used to convert values into PDO representation */ +#define PWR_V_20MV(_V_) ((uint16_t)(( (_V_) * 1000) / 20)) /* From Volt to 20mV multiples */ +#define PWR_V_50MV(_V_) ((uint16_t)(( (_V_) * 1000) / 50)) /* From Volt to 50mV multiples */ +#define PWR_V_100MV(_V_) ((uint16_t)(( (_V_) * 1000) / 100)) /* From Volt to 100mV multiples */ +#define PWR_A_10MA(_A_) ((uint16_t)(( (_A_) * 1000) / 10)) /* From Ampere to 10mA multiples */ +#define PWR_A_50MA(_A_) ((uint16_t)(( (_A_) * 1000) / 50)) /* From Ampere to 50mA multiples */ +#define PWR_W(_W_) ((uint16_t)(( (_W_) * 1000) / 250)) /* From Watt to 250mW multiples */ + +/* Macros used to get values from PDO representation */ +#define PWR_DECODE_50MV(_Value_) ((uint16_t)(((_Value_) * 50))) /* From 50mV multiples to mV */ +#define PWR_DECODE_100MV(_Value_) ((uint16_t)(((_Value_) * 100))) /* From 100mV multiples to mV */ +#define PWR_DECODE_10MA(_Value_) ((uint16_t)(((_Value_) * 10))) /* From 10mA multiples to mA */ +#define PWR_DECODE_50MA(_Value_) ((uint16_t)(((_Value_) * 50))) /* From 50mA multiples to mA */ +#define PWR_DECODE_MW(_Value_) ((uint16_t)(((_Value_) * 250))) /* From 250mW multiples to mW */ + +#define USBPD_PORT_IsValid(__Port__) ((__Port__) < (USBPD_PORT_COUNT)) + +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup STM32_USBPD_APPLICATION_POWER_IF_Exported_Functions USBPD PWR IF Exported Functions + * @{ + */ +/** + * @brief Initialize structures and variables related to power board profiles + * used by Sink and Source, for all available ports. + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_PWR_IF_Init(void); + +/** + * @brief Sets the required power profile + * @param PortNum Port number + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_PWR_IF_SetProfile(uint8_t PortNum); + +/** + * @brief Checks if the power on a specified port is ready + * @param PortNum Port number + * @param Vsafe Vsafe status based on @ref USBPD_VSAFE_StatusTypeDef + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_PWR_IF_SupplyReady(uint8_t PortNum, USBPD_VSAFE_StatusTypeDef Vsafe); + +/** + * @brief Enable VBUS power on a specified port + * @param PortNum Port number + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_PWR_IF_VBUSEnable(uint8_t PortNum); + +/** + * @brief Disable VBUS power on a specified port + * @param PortNum Port number + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_PWR_IF_VBUSDisable(uint8_t PortNum); + +/** + * @brief Checks if the power on a specified port is enabled + * @param PortNum Port number + * @retval ENABLE or DISABLE + */ +USBPD_FunctionalState USBPD_PWR_IF_VBUSIsEnabled(uint8_t PortNum); + +/** + * @brief Reads the voltage and the current on a specified port + * @param PortNum Port number + * @param pVoltage The Voltage in mV + * @param pCurrent The Current in mA + * @retval ENABLE or DISABLE + */ +USBPD_StatusTypeDef USBPD_PWR_IF_ReadVA(uint8_t PortNum, uint16_t *pVoltage, uint16_t *pCurrent); + +/** + * @brief Enables the VConn on the port. + * @param PortNum Port number + * @param CC Specifies the CCx to be selected based on @ref CCxPin_TypeDef structure + * @retval USBPD Status + */ +USBPD_StatusTypeDef USBPD_PWR_IF_Enable_VConn(uint8_t PortNum, CCxPin_TypeDef CC); + +/** + * @brief Disable the VConn on the port. + * @param PortNum Port number + * @param CC Specifies the CCx to be selected based on @ref CCxPin_TypeDef structure + * @retval USBPD Status + */ +USBPD_StatusTypeDef USBPD_PWR_IF_Disable_VConn(uint8_t PortNum, CCxPin_TypeDef CC); + +/** + * @brief Allow PDO data reading from PWR_IF storage. + * @param PortNum Port number + * @param DataId Type of data to be read from PWR_IF + * This parameter can be one of the following values: + * @arg @ref USBPD_CORE_DATATYPE_SRC_PDO Source PDO reading requested + * @arg @ref USBPD_CORE_DATATYPE_SNK_PDO Sink PDO reading requested + * @param Ptr Pointer on address where PDO values should be written (u8 pointer) + * @param Size Pointer on nb of u32 written by PWR_IF (nb of PDOs) + * @retval None + */ +void USBPD_PWR_IF_GetPortPDOs(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId, uint8_t *Ptr, uint32_t *Size); + +/** + * @brief Find out SRC PDO pointed out by a position provided in a Request DO (from Sink). + * @param PortNum Port number + * @param RdoPosition RDO Position in list of provided PDO + * @param Pdo Pointer on PDO value pointed out by RDO position (u32 pointer) + * @retval Status of search + * USBPD_OK : Src PDO found for requested DO position (output Pdo parameter is set) + * USBPD_FAIL : Position is not compliant with current Src PDO for this port (no corresponding PDO value) + */ +USBPD_StatusTypeDef USBPD_PWR_IF_SearchRequestedPDO(uint8_t PortNum, uint32_t RdoPosition, uint32_t *Pdo); + +/** + * @brief the function is called in case of critical issue is detected to switch in safety mode. + * @retval None + */ +void USBPD_PWR_IF_Alarm(void); + +/** + * @brief Function is called to get VBUS power status. + * @param PortNum Port number + * @param PowerTypeStatus Power type status based on @ref USBPD_VBUSPOWER_STATUS + * @retval UBBPD_TRUE or USBPD_FALSE + */ +uint8_t USBPD_PWR_IF_GetVBUSStatus(uint8_t PortNum, USBPD_VBUSPOWER_STATUS PowerTypeStatus); + +/** + * @brief Function is called to set the VBUS threshold when a request has been accepted. + * @param PortNum Port number + * @retval None + */ +void USBPD_PWR_IF_UpdateVbusThreshold(uint8_t PortNum); + +/** + * @brief Function is called to reset the VBUS threshold when there is a power reset. + * @param PortNum Port number + * @retval None + */ +void USBPD_PWR_IF_ResetVbusThreshold(uint8_t PortNum); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_PW_IF_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Inc/usbpd_pwr_user.h b/USB-PD_Provider_1port/Inc/usbpd_pwr_user.h new file mode 100644 index 0000000..7306bc5 --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_pwr_user.h @@ -0,0 +1,412 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_pwr_user.h + * @author MCD Application Team + * @brief Header file for usbpd_pwr_user.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBPD_PWR_USER_H_ +#define __USBPD_PWR_USER_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup POWER + * @{ + */ + +/** @defgroup POWER_Exported_Types Exported Types (BSP V1) + * @{ + */ + +/** + * @brief POWER Status + */ +typedef enum +{ + PWR_OK = 0, + PWR_ERROR +} PWR_StatusTypeDef; + +/** + * @brief Power role + */ +#define PWR_PowerRoleTypeDef USBPD_PWR_PowerRoleTypeDef + +/** + * @brief Voltage control mode + */ +#define PWR_DCDCCtrlModeTypeDef USBPD_PWR_DCDCCtrlModeTypeDef + +/** + * @brief VBUS connection status + */ +#define PWR_VBUSConnectionStatusTypeDef USBPD_PWR_VBUSConnectionStatusTypeDef + +/** + * @} + */ + +/** @defgroup POWER_Exported_Types2 Exported Types based on BSP V2 specification + *@{ + */ + +/** + * @brief Power role + */ +typedef enum +{ + POWER_ROLE_SOURCE = 0, + POWER_ROLE_SINK, + POWER_ROLE_DUAL +} USBPD_PWR_PowerRoleTypeDef; + +/** + * @brief Voltage control mode + */ +typedef enum +{ + DCDC_CTRL_MODE_UNKNOWN = 0, + DCDC_CTRL_MODE_GPIO, + DCDC_CTRL_MODE_PWM, +} USBPD_PWR_DCDCCtrlModeTypeDef; + +/** + * @brief VBUS connection status + */ +typedef enum +{ + VBUS_CONNECTED = 0, + VBUS_NOT_CONNECTED +} USBPD_PWR_VBUSConnectionStatusTypeDef; + +/* Keep for Legacy BSP V1 */ +/** + * @brief VBUS Detection Callback + */ +typedef void PWR_VBUSDetectCallbackFunc(uint32_t Instance, + PWR_VBUSConnectionStatusTypeDef VBUSConnectionStatus); + +/** + * @brief VBUS Detection Callback + */ +typedef void USBPD_PWR_VBUSDetectCallbackFunc(uint32_t Instance, + USBPD_PWR_VBUSConnectionStatusTypeDef VBUSConnectionStatus); + +/** + * @} + */ + +/** @defgroup POWER_Exported_Constants Exported Constants (BSP V1) + * @{ + */ +/** + * @brief Number of TypeC ports + */ +#define PWR_TYPEC_PORT_NB USBPD_PWR_INSTANCES_NBR + +/** + * @brief Type-C port identifier + */ +#define TYPE_C_PORT_1 USBPD_PWR_TYPE_C_PORT_1 +#define TYPE_C_PORT_2 USBPD_PWR_TYPE_C_PORT_2 + +/** + * @brief CC pin identifier + */ +#define TYPE_C_CC1 USBPD_PWR_TYPE_C_CC1 +#define TYPE_C_CC2 USBPD_PWR_TYPE_C_CC2 + +/** + * @brief VBUS disconnection threshold values (in mV) + */ +#define BSP_PWR_HIGH_VBUS_THRESHOLD USBPD_PWR_HIGH_VBUS_THRESHOLD +#define BSP_PWR_LOW_VBUS_THRESHOLD USBPD_PWR_LOW_VBUS_THRESHOLD + +/** + * @brief VBUS discharge parameters + */ +#define BSP_PWR_DISCHARGE_MARGIN USBPD_PWR_DISCHARGE_MARGIN +#define BSP_PWR_DISCHARGE_TIME USBPD_PWR_DISCHARGE_TIME + +/** + * @brief Calibration settings + */ +#define BSP_PWR_DCDC_PRECISION USBPD_PWR_DCDC_PRECISION +#define BSP_PWR_CALIBRATION_ENABLED USBPD_PWR_CALIBRATION_ENABLED +#define BSP_PWR_CALIBRATION_DISABLED USBPD_PWR_CALIBRATION_DISABLED + +/** + * @brief Standard VBUS voltage levels + */ +#define BSP_PWR_VBUS_5V 5000 +#define BSP_PWR_VBUS_9V 9000 +#define BSP_PWR_VBUS_15V 15000 + +/** + * @brief power timeout + */ +#define BSP_PWR_TIMEOUT_PDO USBPD_PWR_TIMEOUT_PDO +#define BSP_PWR_TIMEOUT_APDO USBPD_PWR_TIMEOUT_APDO + +/** + * @brief Invalid value set during issue with voltage setting + */ +#define BSP_PWR_INVALID_VALUE USBPD_PWR_INVALID_VALUE + +/** + * @} + */ + +/** @defgroup POWER_Exported_Constants2 Exported Constants (BSP V2) + * @{ + */ +/* Common Error codes */ +#define BSP_ERROR_NONE 0 +#define BSP_ERROR_NO_INIT -1 +#define BSP_ERROR_WRONG_PARAM -2 +#define BSP_ERROR_BUSY -3 +#define BSP_ERROR_PERIPH_FAILURE -4 +#define BSP_ERROR_COMPONENT_FAILURE -5 +#define BSP_ERROR_UNKNOWN_FAILURE -6 +#define BSP_ERROR_UNKNOWN_COMPONENT -7 +#define BSP_ERROR_BUS_FAILURE -8 +#define BSP_ERROR_CLOCK_FAILURE -9 +#define BSP_ERROR_MSP_FAILURE -10 +#define BSP_ERROR_FEATURE_NOT_SUPPORTED -11 + +/** + * @brief Number of TypeC ports + */ +#define USBPD_PWR_INSTANCES_NBR 2u + +/** + * @brief Type-C port identifier + */ +#define USBPD_PWR_TYPE_C_PORT_1 0u +#define USBPD_PWR_TYPE_C_PORT_2 1u + +/** + * @brief CC pin identifier + */ +#define USBPD_PWR_TYPE_C_CC1 1U +#define USBPD_PWR_TYPE_C_CC2 2U + +/** + * @brief VBUS disconnection threshold values (in mV) + */ +#define USBPD_PWR_HIGH_VBUS_THRESHOLD (2800U) +#define USBPD_PWR_LOW_VBUS_THRESHOLD (750U) +#define USBPD_PWR_VBUS_THRESHOLD_5V (3900U) +#define USBPD_PWR_VBUS_THRESHOLD_9V (7000U) +#define USBPD_PWR_VBUS_THRESHOLD_15V (12500U) +#define USBPD_PWR_VBUS_THRESHOLD_20V (17000U) +#define USBPD_PWR_VBUS_THRESHOLD_APDO (2150U) + +/** + * @brief VBUS discharge parameters + */ +#define USBPD_PWR_DISCHARGE_MARGIN (500U) +#define USBPD_PWR_DISCHARGE_TIME (6U) + +/** + * @brief Calibration settings + */ +#define USBPD_PWR_DCDC_PRECISION (20U) /* DCDC output precision set to 20mV (Noise)*/ +#define USBPD_PWR_CALIBRATION_ENABLED (1U) +#define USBPD_PWR_CALIBRATION_DISABLED (0U) + +/** + * @brief Standard VBUS voltage levels + */ +#define USBPD_PWR_VBUS_5V 5000U +#define USBPD_PWR_VBUS_9V 9000U +#define USBPD_PWR_VBUS_15V 15000U + +/** + * @brief power timeout + */ +#define USBPD_PWR_TIMEOUT_PDO 250U /* Timeout for PDO to PDO or PDO to APDO at 250ms*/ +#define USBPD_PWR_TIMEOUT_APDO 25U /* Timeout for APDO to APDO at 25ms*/ + +/** + * @brief Invalid value set during issue with voltage setting + */ +#define USBPD_PWR_INVALID_VALUE 0xFFFFFFFFU + +/** + * @} + */ + +/** @defgroup POWER_Exported_Functions Exported Functions (BSP V1) + * @{ + */ +PWR_StatusTypeDef BSP_PWR_VBUSInit(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSDeInit(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSOn(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSOff(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Fixed(uint32_t PortNum, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Variable(uint32_t PortNum, + uint32_t VbusTargetMaxInmv, + uint32_t VbusTargetMinInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Battery(uint32_t PortId, + uint32_t VbusTargetMin, + uint32_t VbusTargetMax, + uint32_t OperatingPower, + uint32_t MaxOperatingPower); +PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_APDO(uint32_t PortId, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + int32_t Delta); +uint32_t BSP_PWR_VBUSGetVoltage(uint32_t PortId); + +int32_t BSP_PWR_VBUSGetCurrent(uint32_t PortId); + +PWR_StatusTypeDef BSP_PWR_VCONNInit(uint32_t PortId, + uint32_t CCPinId); + +PWR_StatusTypeDef BSP_PWR_VCONNDeInit(uint32_t PortId, + uint32_t CCPinId); + +PWR_StatusTypeDef BSP_PWR_VCONNOn(uint32_t PortId, + uint32_t CCPinId); + +PWR_StatusTypeDef BSP_PWR_VCONNOff(uint32_t PortId, + uint32_t CCPinId); + +void BSP_PWR_SetVBUSDisconnectionThreshold(uint32_t PortId, + uint32_t VoltageThreshold); + +PWR_StatusTypeDef BSP_PWR_RegisterVBUSDetectCallback(uint32_t PortId, + PWR_VBUSDetectCallbackFunc * pfnVBUSDetectCallback); + +uint8_t BSP_PWR_VBUSIsOn(uint32_t PortId); + +uint8_t BSP_PWR_VCONNIsOn(uint32_t PortId, + uint32_t CCPinId); + +/** + * @} + */ + +/** @defgroup POWER_Exported_Functions2 Exported Functions (BSP V2) + * @{ + */ +/* Common functions */ +int32_t BSP_USBPD_PWR_Init(uint32_t Instance); + +int32_t BSP_USBPD_PWR_Deinit(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSInit(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSDeInit(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSOn(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSOff(uint32_t Instance); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Fixed(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Variable(uint32_t Instance, + uint32_t VbusTargetMaxInmv, + uint32_t VbusTargetMinInmv, + uint32_t OperatingCurrent, + uint32_t MaxOperatingCurrent); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_Battery(uint32_t Instance, + uint32_t VbusTargetMin, + uint32_t VbusTargetMax, + uint32_t OperatingPower, + uint32_t MaxOperatingPower); + +int32_t BSP_USBPD_PWR_VBUSSetVoltage_APDO(uint32_t Instance, + uint32_t VbusTargetInmv, + uint32_t OperatingCurrent, + int32_t Delta); + +int32_t BSP_USBPD_PWR_VBUSGetVoltage(uint32_t Instance, uint32_t *pVoltage); + +int32_t BSP_USBPD_PWR_VBUSGetCurrent(uint32_t Instance, int32_t *pCurrent); + +int32_t BSP_USBPD_PWR_VCONNInit(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_VCONNDeInit(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_VCONNOn(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_VCONNOff(uint32_t Instance, + uint32_t CCPinId); + +int32_t BSP_USBPD_PWR_SetVBUSDisconnectionThreshold(uint32_t Instance, + uint32_t VoltageThreshold); + +int32_t BSP_USBPD_PWR_RegisterVBUSDetectCallback(uint32_t Instance, + USBPD_PWR_VBUSDetectCallbackFunc *pfnVBUSDetectCallback); + +int32_t BSP_USBPD_PWR_VBUSIsOn(uint32_t Instance, uint8_t *pState); + +int32_t BSP_USBPD_PWR_VCONNIsOn(uint32_t Instance, + uint32_t CCPinId, uint8_t *pState); + +int32_t BSP_USBPD_PWR_VCCSetState(uint32_t Instance, uint32_t State); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_PWR_USER_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Inc/usbpd_vdm_user.h b/USB-PD_Provider_1port/Inc/usbpd_vdm_user.h new file mode 100644 index 0000000..ce6bf8a --- /dev/null +++ b/USB-PD_Provider_1port/Inc/usbpd_vdm_user.h @@ -0,0 +1,62 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file usbpd_vdm_user.h + * @author MCD Application Team + * @brief Header file for usbpd_vdm_user.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_VDM_USER_H_ +#define __USBPD_VDM_USER_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/** @addtogroup STM32_USBPD_APPLICATION + * @{ + */ + +/** @addtogroup STM32_USBPD_APPLICATION_VDM_USER + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/* Exported define -----------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +USBPD_StatusTypeDef USBPD_VDM_UserInit(uint8_t PortNum); +void USBPD_VDM_UserReset(uint8_t PortNum); + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_VDM_USER_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_core.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_core.h new file mode 100644 index 0000000..3fd97bc --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_core.h @@ -0,0 +1,1097 @@ +/** + ****************************************************************************** + * @file usbpd_core.h + * @author MCD Application Team + * @brief This file contains the core stack API. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +#ifndef __USBPD_CORE_H_ +#define __USBPD_CORE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_def.h" +#if defined(USBPDCORE_TCPM_SUPPORT) +#include "tcpc.h" +#endif /* USBPDCORE_TCPM_SUPPORT */ + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_CORE + * @{ + */ + +/** @addtogroup USBPD_CORE_CAD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USBPD_CORE_CAD_Exported_Types USBPD CORE CAD Exported Types + * @{ + */ + +/** + * @brief function return value @ref USBPD_CORE_CAD + * @{ + */ +typedef enum +{ + USBPD_CAD_OK, /*!< USBPD CAD Status OK */ + USBPD_CAD_INVALID_PORT, /*!< USBPD CAD Status INVALID PORT */ + USBPD_CAD_ERROR, /*!< USBPD CAD Status ERROR */ + USBPD_CAD_MALLOCERROR, /*!< USBPD CAD Status ERROR MALLOC */ + USBPD_CAD_INVALIDRESISTOR /*!< USBPD CAD Status INVALID RESISTOR */ +} +USBPD_CAD_StatusTypeDef; +/** + * @} + */ + +/** + * @brief activation value @ref USBPD_CORE_CAD + * @{ + */ +typedef enum +{ + USBPD_CAD_DISABLE, /*!< USBPD CAD activation status Disable */ + USBPD_CAD_ENABLE /*!< USBPD CAD activation status Enable */ +} USBPD_CAD_activation; +/** + * @} + */ + +/** + * @brief CallBacks exposed by the @ref USBPD_CORE_CAD + */ +typedef struct +{ + /** + * @brief CallBack used to report events to DPM. + * @param PortNum The handle of the port + * @param State CAD state @ref USBPD_CAD_EVENT + * @param Cc The Communication Channel for the USBPD communication @ref CCxPin_TypeDef + * @retval None + */ + void (*USBPD_CAD_CallbackEvent)(uint8_t PortNum, USBPD_CAD_EVENT State, CCxPin_TypeDef Cc); + /** + * @brief CallBack to wakeup the CAD. + * @retval None + */ + void (*USBPD_CAD_WakeUp)(void); +} USBPD_CAD_Callbacks; + +/** + * @} + */ + +/** @defgroup USBPD_CORE_CAD_Exported_Functions_Grp1 USBPD CORE CAD Exported Functions + * @{ + */ +/** + * @brief Initialize the CAD module for a specified port. + * @param PortNum Index of current used port + * @param CallbackFunctions CAD port callback function + * @param Settings Pointer on @ref USBPD_SettingsTypeDef structure + * @param Params Pointer on @ref USBPD_ParamsTypeDef structure + * @retval USBPD_CAD status + */ +USBPD_CAD_StatusTypeDef USBPD_CAD_Init(uint8_t PortNum, const USBPD_CAD_Callbacks *CallbackFunctions, USBPD_SettingsTypeDef *Settings, USBPD_ParamsTypeDef *Params); + +/** + * @brief function used to process type C state machine detection. + * @retval Timing in ms + */ +uint32_t USBPD_CAD_Process(void); + +/** + * @brief Enable or Disable CAD port. + * @param PortNum Index of current used port + * @param State The new state of the port @ref USBPD_CAD_activation + * @retval None + */ +void USBPD_CAD_PortEnable(uint8_t PortNum, USBPD_CAD_activation State); + +/** + * @brief Set the resitor to present a SNK. + * @param PortNum Index of current used port + * @retval None + */ +void USBPD_CAD_AssertRd(uint8_t PortNum); + +/** + * @brief Set the resitor to present a SRC. + * @param PortNum Index of current used port + * @retval None + */ +void USBPD_CAD_AssertRp(uint8_t PortNum); + +/** + * @brief Force type C state machine to enter recovery state + * @param PortNum Index of current used port + * @retval None + */ +void USBPD_CAD_EnterErrorRecovery(uint8_t PortNum); + +#if defined(USBPDCORE_DRP) || defined(USBPDCORE_SRC) +/** + * @brief Set the default Rd resistor (valid for SRC only) + * @param PortNum Index of current used port + * @param RdValue + * @retval USBPD_CAD_OK or USBPD_CAD_INVALIDRESISTOR + */ +USBPD_CAD_StatusTypeDef USBPD_CAD_SRC_SetRpResistor(uint8_t PortNum, CAD_RP_Source_Current_Adv_Typedef RdValue); + +/** @defgroup USBPD_CORE_CAD_Exported_Functions_Legacy USBPD CORE CAD Legacy Function + * @{ + */ +/* Keep for legacy reason */ +USBPD_CAD_StatusTypeDef USBPD_CAD_SetRpResistor(uint8_t PortNum, CAD_RP_Source_Current_Adv_Typedef RdValue); +/** + * @} + */ +#endif /* USBPDCORE_DRP || USBPDCORE_SRC */ + +/** + * @} + */ + +/** @addtogroup USBPD_CORE_TRACE + * @{ + */ + +/** @defgroup USBPD_CORE_TRACE_Exported_Types USBPD CORE TRACE Exported Types + * @{ + */ +typedef enum +{ + USBPD_TRACE_FORMAT_TLV = 0, + USBPD_TRACE_MESSAGE_IN = 1, + USBPD_TRACE_MESSAGE_OUT = 2, + USBPD_TRACE_CADEVENT = 3, + USBPD_TRACE_PE_STATE = 4, + USBPD_TRACE_CAD_LOW = 5, + USBPD_TRACE_DEBUG = 6, + USBPD_TRACE_SRC = 7, + USBPD_TRACE_SNK = 8, + USBPD_TRACE_NOTIF = 9, + USBPD_TRACE_POWER = 10, + USBPD_TRACE_TCPM = 11, + USBPD_TRACE_PRL_STATE = 12, + USBPD_TRACE_PRL_EVENT = 13, + USBPD_TRACE_PHY_NOTFRWD = 14 +} +TRACE_EVENT; + +typedef void (*TRACE_ENTRY_POINT)(TRACE_EVENT type, uint8_t port, uint8_t sop, uint8_t *ptr, uint32_t size); + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup USBPD_CORE_PE + * @{ + */ +/** @defgroup USBPD_CORE_PE_Private_Defines USBPD CORE PE Private Defines + * @brief These defines are used in the stack library. Just provided for infomation. + * Those timers values are not to be changed by user (changing values on user side, will not have any impacts on lib behavior). + * @{ + * + */ + +/* Policy Engine Timers */ +#ifdef USBPDCORE_PPS +#define PE_TPPSREQUEST 9000u /*!< tPPSRequest: Max value set to 10s */ +#define PE_TPPSTIMEOUT 14000u /*!< tPPSTimeout: min 12s to max 15s */ +#endif /* USBPDCORE_PPS */ +#define PE_TPSHARDRESET 27u /*!< tPSHardReset: min 25ms to max 30ms */ +#define PE_SRC_TSRCRECOVER 800u /*!< tSrcRecover for SRC: min 660 ms max 1s */ +#define PE_SNK_TSRCRECOVER 2000u /*!< tSrcRecover for SNK: 2s (less restrictive for SINK tests) */ +#define PE_SRC_TSAFE0V_T2 650u /*!< tSafe0V for SRC: 650 ms */ +#define PE_SNK_TSAFE0V_T2 1000u /*!< tSafe0V for SNK: 1000 ms */ +#define PE_TSRCTURNON_T4 275u /*!< tSrcTurnOn: 275 ms */ +#define PE_TPSSOURCEOFF 910u /*!< tPSSourceOff: min 750ms to max 920ms */ +#define PE_TPSSOURCEON 470u /*!< tPSSourceOn: min 390ms to max 480ms */ + +#define PE_TPSTRANSITION 500u /*!< tPSTransition: min 450ms to max 550ms */ + +#define PE_TSENDERRESPONSE 27u /*!< tSenderResponse: min 24ms to max 30ms */ + +#define PE_TTYPECSINKWAITCAP 500u /*!< tTypeCSinkWaitCap: min 310ms to max 620ms */ + +#define PE_TTYPECSENDSOURCECAPA 150u /*!< tTypeCSendSourceCap: min 100ms to max 200ms */ +#define PE_TSRCTRANSITION 30u /*!< tSrcTransition: min 25ms to max 35ms */ + +#define PE_TSWAPSRCSTART_MIN 20u /*!< tSwapSourceStart: 20 ms */ + +#define PE_TBISTCONTMODE 58u /*!< tBISTContMode: min 30ms to 60 ms */ +#if defined(USBPDCORE_VCONN_SUPPORT) +#define PE_TDISCOVERIDENTITY 45u /*!< tDiscoverIdentity: min 40ms to max 50ms */ +#endif /* USBPDCORE_VCONN_SUPPORT */ + +#define PE_TVDMSENDERRESPONSE 30u /*!< tVDMSenderResponse: min 24ms to max 30ms */ + +#if defined(USBPDCORE_SVDM) +#define PE_TVDMRECEIVERRESPONSE 15u /*!< tVDMReceiverResponse: max 15ms */ +#define PE_TVDMENTERMODE 25u /*!< tVDMEnterMode: max 25ms */ +#define PE_TVDMEXITMODE 25u /*!< tVDMExitMode: max 25ms */ +#endif /* USBPDCORE_SVDM */ + +#if defined(USBPDCORE_SVDM) || defined(USBPDCORE_VCONN_SUPPORT) +#define PE_TVDMWAITMODEENTRY 50u /*!< tVDMWaitModeEntry: max 40ms to 50ms */ +#define PE_TVDMWAITMODEEXIT 50u /*!< tVDMWaitModeExit: max 40ms to 50ms */ +#endif /* USBPDCORE_SVDM || USBPDCORE_VCONN_SUPPORT */ + +#ifdef USBPDCORE_VCONN_SUPPORT +#define PE_TVCONNSOURCETIMEOUT 150u /*!< tVCONNSourceTimeout: min 100ms to max 200ms */ +#endif /* USBPDCORE_VCONN_SUPPORT */ +/** + * @} + */ + +#if defined(USBPDCORE_SVDM) || defined(USBPDCORE_UVDM) || defined(USBPDCORE_VCONN_SUPPORT) +/** @defgroup USBPD_CORE_VDM_Exported_Callback USBPD CORE VDM Exported Callback + * @{ + */ + +/** + * @brief CallBacks exposed by the @ref USBPD_CORE_PE + * */ +typedef struct +{ +#if defined(USBPDCORE_SVDM) || defined(USBPDCORE_VCONN_SUPPORT) + /** + * @brief VDM Discovery identity callback + * @note Function is called to get Discovery identity information linked to the device and answer + * to SVDM Discovery identity init message sent by port partner + * @param PortNum current port number + * @param pIdentity Pointer on @ref USBPD_DiscoveryIdentity_TypeDef structure + * @retval USBPD status: @ref USBPD_ACK or @ref USBPD_BUSY + */ + USBPD_StatusTypeDef(*USBPD_VDM_DiscoverIdentity)(uint8_t PortNum, USBPD_DiscoveryIdentity_TypeDef *pIdentity); + + /** + * @brief VDM Discover SVID callback + * @note Function is called to retrieve SVID supported by device and answer + * to SVDM Discovery SVID init message sent by port partner + * @param PortNum current port number + * @param p_SVID_Info Pointer on @ref USBPD_SVIDInfo_TypeDef structure + * @param pNbSVID Pointer on number of SVID + * @retval USBPD status @ref USBPD_BUSY or @ref USBPD_ACK or @ref USBPD_NAK + */ + USBPD_StatusTypeDef(*USBPD_VDM_DiscoverSVIDs)(uint8_t PortNum, uint16_t **p_SVID_Info, uint8_t *pNbSVID); + + /** + * @brief VDM Discover Mode callback (report all the modes supported by SVID) + * @note Function is called to report all the modes supported by selected SVID and answer + * to SVDM Discovery Mode init message sent by port partner + * @param PortNum current port number + * @param SVID SVID value + * @param p_ModeTab Pointer on the mode value + * @param NumberOfMode Number of mode available + * @retval USBPD status + */ + USBPD_StatusTypeDef(*USBPD_VDM_DiscoverModes)(uint8_t PortNum, uint16_t SVID, uint32_t **p_ModeTab, uint8_t *NumberOfMode); + + /** + * @brief VDM Mode enter callback + * @note Function is called to check if device can enter in the mode received for the selected SVID in the + * SVDM enter mode init message sent by port partner + * @param PortNum current port number + * @param SVID SVID value + * @param ModeIndex Index of the mode to be entered + * @retval USBPD status @ref USBPD_ACK/@ref USBPD_NAK + */ + USBPD_StatusTypeDef(*USBPD_VDM_ModeEnter)(uint8_t PortNum, uint16_t SVID, uint32_t ModeIndex); + + /** + * @brief VDM Mode exit callback + * @note Function is called to check if device can exit from the mode received for the selected SVID in the + * SVDM exit mode init message sent by port partner + * @param PortNum current port number + * @param SVID SVID value + * @param ModeIndex Index of the mode to be exited + * @retval USBPD status @ref USBPD_ACK/@ref USBPD_NAK + */ + USBPD_StatusTypeDef(*USBPD_VDM_ModeExit)(uint8_t PortNum, uint16_t SVID, uint32_t ModeIndex); + + /** + * @brief Inform identity callback + * @note Function is called to save Identity information received in Discovery identity from port partner + (answer to SVDM discovery identity sent by device) + * @param PortNum current port number + * @param SOPType SOP type + * @param CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef + * @param pIdentity Pointer on the discovery identity information based on @ref USBPD_DiscoveryIdentity_TypeDef + * @retval None + */ + void (*USBPD_VDM_InformIdentity)(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_DiscoveryIdentity_TypeDef *pIdentity); + + /** + * @brief Inform SVID callback + * @note Function is called to save list of SVID received in Discovery SVID from port partner + (answer to SVDM discovery SVID sent by device) + * @param PortNum current port number + * @param SOPType SOP type + * @param CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef + * @param pListSVID Pointer of list of SVID based on @ref USBPD_SVIDInfo_TypeDef + * @retval None + */ + void (*USBPD_VDM_InformSVID)(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_SVIDInfo_TypeDef *pListSVID); + + /** + * @brief Inform Mode callback ( received in Discovery Modes ACK) + * @note Function is called to save list of modes linked to SVID received in Discovery mode from port partner + (answer to SVDM discovery mode sent by device) + * @param PortNum current port number + * @param SOPType SOP type + * @param CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef + * @param pModesInfo Pointer of Modes info based on @ref USBPD_ModeInfo_TypeDef + * @retval None + */ + void (*USBPD_VDM_InformMode)(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_ModeInfo_TypeDef *pModesInfo); + + /** + * @brief Inform Mode enter callback + * @note Function is called to inform if port partner accepted or not to enter in the mode + * specified in the SVDM enter mode sent by the device + * @param PortNum current port number + * @param SOPType SOP type + * @param CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef + * @param SVID SVID ID + * @param ModeIndex Index of the mode to be entered + * @retval None + */ + void (*USBPD_VDM_InformModeEnter)(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, uint16_t SVID, uint32_t ModeIndex); + + /** + * @brief Inform Mode exit callback + * @note Function is called to inform if port partner accepted or not to exit from the mode + * specified in the SVDM exit mode sent by the device + * @param PortNum current port number + * @param SOPType SOP type + * @param CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef + * @param SVID SVID ID + * @param ModeIndex Index of the mode to be exited + * @retval None + */ + void (*USBPD_VDM_InformModeExit)(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, uint16_t SVID, uint32_t ModeIndex); + + /** + * @brief Send VDM Attention message callback + * @note Function is called when device wants to send a SVDM attention message to port partner + * (for instance DP status can be filled through this function) + * @param PortNum current port number + * @param pNbData Pointer of number of VDO to send + * @param pVDO Pointer of VDO to send + * @retval None + */ + void (*USBPD_VDM_SendAttention)(uint8_t PortNum, uint8_t *pNbData, uint32_t *pVDO); + + /** + * @brief Receive VDM Attention callback + * @note Function is called when a SVDM attention init message has been received from port partner + * (for instance, save DP status data through this function) + * @param PortNum current port number + * @param NbData Number of received VDO + * @param VDO Received VDO + * @retval None + */ + void (*USBPD_VDM_ReceiveAttention)(uint8_t PortNum, uint8_t NbData, uint32_t VDO); + + /** + * @brief VDM Send Specific message callback + * @note Function is called when device wants to send a SVDM specific init message to port partner + * (for instance DP status or DP configure can be filled through this function) + * @param PortNum current port number + * @param SOPType SOP type + * @param VDMCommand VDM command based on @ref USBPD_VDM_Command_Typedef + * @param pNbData Pointer of number of VDO to send + * @param pVDO Pointer of VDO to send + * @retval None + */ + void (*USBPD_VDM_SendSpecific)(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *pNbData, uint32_t *pVDO); + + /** + * @brief VDM Receive Specific message callback + * @note Function is called to answer to a SVDM specific init message received by port partner. + * (for instance, retrieve DP status or DP configure data through this function) + * @param PortNum Current port number + * @param VDMCommand VDM command based on @ref USBPD_VDM_Command_Typedef + * @param pNbData Pointer of number of received VDO and used for the answer + * @param pVDO Pointer of received VDO and use for the answer + * @retval USBPD Status + */ + USBPD_StatusTypeDef(*USBPD_VDM_ReceiveSpecific)(uint8_t PortNum, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *pNbData, uint32_t *pVDO); + + /** + * @brief VDM Specific message callback to inform user of reception of VDM specific message + * @note Function is called when answer from SVDM specific init message has been received by the device + * (for instance, save DP status and DP configure data through this function) + * @param PortNum current port number + * @param SOPType SOP type + * @param VDMCommand VDM command based on @ref USBPD_VDM_Command_Typedef + * @param pNbData Pointer of number of received VDO + * @param pVDO Pointer of received VDO + * @retval None + */ + void (*USBPD_VDM_InformSpecific)(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *pNbData, uint32_t *pVDO); + +#endif /* USBPDCORE_SVDM || USBPDCORE_VCONN_SUPPORT */ +#if defined(USBPDCORE_UVDM) + /** + * @brief VDM Send Unstructured message callback + * @param PortNum current port number + * @param pUVDM_Header Pointer on UVDM header based on @ref USBPD_UVDMHeader_TypeDef + * @param pNbData Pointer of number of VDO to send + * @param pVDO Pointer of VDO to send + * @retval None + */ + void (*USBPD_VDM_SendUVDM)(uint8_t PortNum, USBPD_UVDMHeader_TypeDef *pUVDM_Header, uint8_t *pNbData, uint32_t *pVDO); + + /** + * @brief Unstructured VDM message callback to inform user of reception of UVDM message + * @param PortNum current port number + * @param UVDM_Header UVDM header based on @ref USBPD_UVDMHeader_TypeDef + * @param pNbData Pointer of number of received VDO + * @param pVDO Pointer of received VDO + * @retval USBPD Status + */ + USBPD_StatusTypeDef(*USBPD_VDM_ReceiveUVDM)(uint8_t PortNum, USBPD_UVDMHeader_TypeDef UVDM_Header, uint8_t *pNbData, uint32_t *pVDO); +#endif /* USBPDCORE_UVDM */ +} USBPD_VDM_Callbacks; + +/** + * @} + */ + +#endif /* USBPDCORE_SVDM || USBPDCORE_UVDM || USBPDCORE_VCONN_SUPPORT */ + +/** @defgroup USBPD_CORE_PE_Exported_TypesDefinitions USBPD CORE PE Exported Types Definitions + * @{ + */ + +/** @defgroup PE_CallBacks_structure_definition PE CallBacks structure definition + * @brief PE CallBacks exposed by the PE to the DMP + * @{ + */ +typedef struct +{ + /** + * @brief Callback used to request DPM to setup the new power level. + * @note this callback is mandatory for a SRC and DRP. + * @param PortNum Port number + * @retval Returned values are: @ref USBPD_ACCEPT, @ref USBPD_REJECT, @ref USBPD_WAIT + */ + USBPD_StatusTypeDef(*USBPD_PE_RequestSetupNewPower)(uint8_t PortNum); + + /** + * @brief Callback used to inform the DPM about the different HardReset step. + * @param PortNum Port number + * @param Role of the board @ref USBPD_PortPowerRole_TypeDef + * @param Status HR Status @ref USBPD_HR_Status_TypeDef + * @retval None + */ + void (*USBPD_PE_HardReset)(uint8_t PortNum, USBPD_PortPowerRole_TypeDef CurrentRole, USBPD_HR_Status_TypeDef Status); + + /** + * @brief Callback used to ask application the reply status for a power role swap request. + * @note if the callback is NULL, the request power role swap are automatically rejected. + * @param PortNum Port number + * @retval Returned values are: @ref USBPD_ACCEPT, @ref USBPD_WAIT, @ref USBPD_REJECT + */ + USBPD_StatusTypeDef(*USBPD_PE_EvaluatPRSwap)(uint8_t PortNum); + + /** + * @brief Callback used by the stack to notify an event. + * @note this callback is mandatory + * @param PortNum Port number + * @param EventVal @ref USBPD_NotifyEventValue_TypeDef + * @retval none + */ + void (*USBPD_PE_Notify)(uint8_t PortNum, USBPD_NotifyEventValue_TypeDef EventVal); + + /** + * @brief Callback used by the stack to inform DPM that an extended message has been received. + * @param PortNum port number value + * @param MsgId extended message id @ref USBPD_ExtendedMsg_TypeDef + * @param ptrData pointer on the data + * @param DataSize size of the data + * @retval None + */ + void (*USBPD_PE_ExtendedMessage)(uint8_t PortNum, USBPD_ExtendedMsg_TypeDef MsgId, uint8_t *ptrData, uint16_t DataSize); + + /** + * @brief Callback used by the stack to get information from DPM or PWR_IF. + * @param PortNum Port number + * @param DataId Type of data to be read from DPM based on @ref USBPD_CORE_DataInfoType_TypeDef + * @param Ptr Pointer on address where DPM data should be written (u8 pointer) + * @param Size Pointer on nb of bytes written by DPM + * @retval None + */ + void (*USBPD_PE_GetDataInfo)(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId , uint8_t *Ptr, uint32_t *Size); + + /** + * @brief Callback used by the stack to set information inside DPM or PWR_IF. + * @param PortNum Port number + * @param DataId Type of data to be read from DPM based on @ref USBPD_CORE_DataInfoType_TypeDef + * @param Ptr Pointer on address where DPM data to be updated could be read (u8 pointer) + * @param Size Nb of byte to be updated in DPM + * @retval None + */ + void (*USBPD_PE_SetDataInfo)(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId , uint8_t *Ptr, uint32_t Size); + + /** + * @brief Callback used by a SOURCE to evluate the SINK request + * @param PortNum Port number + * @param PtrPowerObject Pointer on the power data object + * @retval Returned values are: @ref USBPD_ACCEPT, @ref USBPD_REJECT, @ref USBPD_WAIT, @ref USBPD_GOTOMIN + */ + USBPD_StatusTypeDef(*USBPD_PE_SRC_EvaluateRequest)(uint8_t PortNum, USBPD_CORE_PDO_Type_TypeDef *PtrPowerObject); + + /** + * @brief Callback used by a sink to evaluate the Source Capabilities. + * @note the callback is used in the SNK and DRP context. + * @param PortNum Port number + * @param PtrRequestData Pointer on selected request data object + * @param PtrPowerObject Pointer on selected power data object + * @retval None + */ + void (*USBPD_PE_SNK_EvaluateCapabilities)(uint8_t PortNum, uint32_t *RequestData, USBPD_CORE_PDO_Type_TypeDef *PtrPowerObject); + + /** + * @brief Callback used during the different step of the power role swap + * @note see MSC documentation to get more detail + * @param PortNum Port number + * @param Role of the board @ref USBPD_PortPowerRole_TypeDef + * @param Status HR Status update @ref USBPD_PRS_Status_TypeDef + * @retval None + */ + void (*USBPD_PE_PowerRoleSwap)(uint8_t PortNum, USBPD_PortPowerRole_TypeDef CurrentRole, USBPD_PRS_Status_TypeDef Status); + + /** + * @brief Callback used to wakeup the current state machine + * @note this function is mandatory but has effect only in RTOS context + * @param PortNum Port number + * @retval None + */ + void (*USBPD_PE_WakeupCallback)(uint8_t PortNum); + + /** + * @brief Callback used to ask application the reply status for a Vconn swap request + * @param PortNum Port number + * @retval Returned values are: @ref USBPD_ACCEPT, @ref USBPD_REJECT, @ref USBPD_WAIT + */ + USBPD_StatusTypeDef(*USBPD_PE_EvaluateVconnSwap)(uint8_t PortNum); + + /** + * @brief Callback used to enable/disable the vconn power + * @note the function is mandatory to manage the VconnPower + * @param PortNum Port number + * @param State Enable or Disable VConn on CC lines + * @retval Returned values are: @ref USBPD_ACCEPT, @ref USBPD_REJECT + */ + USBPD_StatusTypeDef(*USBPD_PE_VconnPwr)(uint8_t PortNum, USBPD_FunctionalState State); + + /** + * @brief Callback used by PE to enter in error recovery state + * @param PortNum Port number + * @retval None + */ + void (*USBPD_PE_EnterErrorRecovery)(uint8_t PortNum); + + /** + * @brief Callback used to ask application the reply status for a DataRoleSwap request + * @note if the callback is not set (ie NULL) the stack will automatically reject the request + * @param PortNum Port number + * @retval Returned values are: + @ref USBPD_ACCEPT if DRS can be accepted + @ref USBPD_REJECT if DRS is not accepted in one data role (DFP or UFP) or in PD2.0 config + @ref USBPD_NOTSUPPORTED if DRS is not supported at all by the application (in both data roles) - P3.0 only + */ + USBPD_StatusTypeDef(*USBPD_PE_DataRoleSwap)(uint8_t PortNum); + + /** + * @brief Callback used to check the VBUS status + * @note this function is mandatory for a SNK port and used inside the hardreset process + * @param PortNum Port number + * @param Vsafe Vsafe status based on @ref USBPD_VSAFE_StatusTypeDef + * @retval Returned values are: @ref USBPD_DISABLE or @ref USBPD_ENABLE + */ + USBPD_FunctionalState(*USBPD_PE_IsPowerReady)(uint8_t PortNum, USBPD_VSAFE_StatusTypeDef Vsafe); + +} USBPD_PE_Callbacks; + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USBPD_CORE_PE_Exported_Functions USBPD CORE PE Exported Functions + * @{ + */ + +/** @defgroup USBPD_CORE_PE_Exported_Functions_Group1 USBPD CORE PE Exported Functions to DPM CORE + * @{ + */ +/** + * @brief Initialize Policy Engine layer for a Port + * @note the value pSettings and pParams shall be presistante because the stack keep there memory location + * @param PortNum Index of current used port + * @param pSettings Pointer on @ref USBPD_SettingsTypeDef structure + * @param pParams Pointer on @ref USBPD_ParamsTypeDef structure + * @param PECallbacks Callback function to be passed to PRL layer + * @retval USBPD status @ref USBPD_OK or @ref USBPD_ERROR + */ +USBPD_StatusTypeDef USBPD_PE_Init(uint8_t PortNum, USBPD_SettingsTypeDef *pSettings, USBPD_ParamsTypeDef *pParams, const USBPD_PE_Callbacks *PECallbacks); + +/** + * @brief Check coherence between lib selected and the lib include inside the project + * @note This function can be used only during development process to avoid mismatch + * @param LibId Value fix defined with the switch lib. + * @retval if the check is OK @ref USBPD_TRUE else @ref USBPD_FALSE + */ +uint32_t USBPD_PE_CheckLIB(uint32_t LibId); + +/** + * @brief Return the need of the stack in terms of dynamique allocation + * @note the value returned corresponds to the allocationt need for 2 ports so if application manage + * only one port the need is be divided by 2 + * @retval Memory size + */ +uint32_t USBPD_PE_GetMemoryConsumption(void); + +/** + * @brief Set the trace pointer and the debug level + * @note the recommended value for debug trace level is 0x3 + * 0x1 : Policy engine state + * 0x2 : Notification + * 0x3 : Policy engine state + Notification + * @param Ptr function on trace + * @param Debug Trace debug level + * @retval None + */ +void USBPD_PE_SetTrace(TRACE_ENTRY_POINT Ptr, uint8_t Debug); + +#if defined(USBPDCORE_SRC) || defined(USBPDCORE_DRP) +/** + * @brief Policy Engine Source state machine + * @param PortNum Index of current used port + * @retval Timing in ms + */ +uint32_t USBPD_PE_StateMachine_SRC(uint8_t PortNum); +#endif /* USBPDCORE_SRC || USBPDCORE_DRP */ + +#if defined(USBPDCORE_SNK) || defined(USBPDCORE_DRP) +/** + * @brief Policy Engine Sink state machine + * @param PortNum Index of current used port + * @retval Timing in ms + */ +uint32_t USBPD_PE_StateMachine_SNK(uint8_t PortNum); +#endif /* USBPDCORE_SNK || USBPDCORE_DRP */ + +#ifdef USBPDCORE_DRP +/** + * @brief Policy Engine DRP state machine + * @param PortNum Index of current used port + * @retval Timing in ms + */ +uint32_t USBPD_PE_StateMachine_DRP(uint8_t PortNum); +#endif /* USBPDCORE_DRP */ + +#if defined(USBPDCORE_VPD) && defined(USBPDCORE_SNK) +/** + * @brief Policy Engine SNK state machine supporting VPD + * @param PortNum Index of current used port + * @retval Timing in ms + */ +uint32_t USBPD_PE_StateMachine_SNKwVPD(uint8_t PortNum); +#endif /* USBPDCORE_DRP */ + +/** + * @brief Function called by DPM to set the cable status connected or disconnected. + * @param PortNum Index of current used port + * @param IsConnected Cable connection status: 1 if connected and 0 is disconnected + * @retval USBPD status @ref USBPD_OK + */ +void USBPD_PE_IsCableConnected(uint8_t PortNum, uint8_t IsConnected); + +/** + * @brief Increment PE Timers tick + * @note This function must be called each elasped ms + * @param PortNum Index of current used port + * @retval None + */ +void USBPD_PE_TimerCounter(uint8_t PortNum); + +/** + * @brief Update PE Timers tick + * @note This function must be called when exited the low power mode + * @param PortNum Index of current used port + * @param Tick value in ms + * @retval None + */ +void USBPD_PE_TimerCounteUpdate(uint8_t PortNum, uint32_t Tick); + +/** + * @} + */ + +#if defined(USBPDCORE_SVDM) || defined(USBPDCORE_UVDM) || defined(USBPDCORE_VCONN_SUPPORT) +/** @defgroup USBPD_CORE_PE_Exported_Functions_Group2 USBPD CORE PE Exported Functions to VDM USER + * @{ + */ +/** + * @brief Initialize VDM callback functions in PE + * @param PortNum Index of current used port + * @param VDMCallbacks Pointer on VDM callbacks based on @ref USBPD_VDM_Callbacks + * @retval None + */ +void USBPD_PE_InitVDM_Callback(uint8_t PortNum, USBPD_VDM_Callbacks *VDMCallbacks); +/** + * @} + */ +#endif /* USBPDCORE_SVDM || USBPDCORE_UVDM || USBPDCORE_VCONN_SUPPORT*/ + +/** @defgroup USBPD_CORE_PE_Exported_Functions_Group3 USBPD CORE PE Exported Functions to DPM USER + * @{ + */ + +/** + * @brief This generic function to send a control message + * @param PortNum Index of current used port + * @param CtrlMsg Control message id @ref USBPD_ControlMsg_TypeDef + * @param SOPType SOP Type based on @ref USBPD_SOPType_TypeDef + * @retval status @ref USBPD_OK, @ref USBPD_BUSY, @ref USBPD_ERROR or @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_Request_CtrlMessage(uint8_t PortNum, USBPD_ControlMsg_TypeDef CtrlMsg, USBPD_SOPType_TypeDef SOPType); + +/** + * @brief This generic function is used to send data message + * @note the parameter pData is used only if DataMsg is equal to USBPD_DATAMSG_ALERT or USBPD_DATAMSG_GET_COUNTRY_INFO + * @param PortNum Index of current used port + * @param DataMsg Data message id based on @ref USBPD_DataMsg_TypeDef + * @param pData Pointer on the data to send + * @retval status @ref USBPD_OK, @ref USBPD_BUSY, @ref USBPD_ERROR or @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_Request_DataMessage(uint8_t PortNum, USBPD_DataMsg_TypeDef DataMsg, uint32_t *pData); + +/** + * @brief This function is used to force PE to perform an Hard Reset. + * @param PortNum Index of current used port + * @retval status @ref USBPD_OK + */ +USBPD_StatusTypeDef USBPD_PE_Request_HardReset(uint8_t PortNum); + +/** + * @brief Request the PE to send a cable reset. + * @note Only a DFP Shall generate Cable Reset Signaling. A DFP Shall only generate Cable Reset Signaling within an Explicit Contract. + The DFP has to be supplying VCONN prior to a Cable Reset + * @param PortNum The current port number + * @retval USBPD Status + */ +USBPD_StatusTypeDef USBPD_PE_Request_CableReset(uint8_t PortNum); + +#if defined(USBPDCORE_SNK) || defined(USBPDCORE_DRP) +/** + * @brief This function request PE to send a request message + * @param PortNum Index of current used port + * @param Rdo Requested data object + * @param PWobject Power Object + * @retval status @ref USBPD_OK, @ref USBPD_BUSY, @ref USBPD_ERROR or @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_Send_Request(uint8_t PortNum, uint32_t Rdo, USBPD_CORE_PDO_Type_TypeDef PWobject); +#endif /* USBPDCORE_SNK || USBPDCORE_DRP */ + +#if defined(USBPD_REV30_SUPPORT) +#if defined(USBPDCORE_BATTERY) || defined(USBPDCORE_MANU_INFO) || defined(USBPDCORE_SECURITY_MSG) || defined(USBPDCORE_FWUPD) +/** + * @brief This function send an extended message + * @note The management of chunk or unchunked message is manage inside the + * @param PortNum Port number value + * @param SOPType Message type based on @ref USBPD_SOPType_TypeDef + * @param MessageType Extended Msg type @ref USBPD_ExtendedMsg_TypeDef + * @param Ptrdata Data pointer to PRL layer + * @param DataSize Size of the data (<= 260) + * @retval status @ref USBPD_OK, @ref USBPD_BUSY, @ref USBPD_ERROR or @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_SendExtendedMessage(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_ExtendedMsg_TypeDef MessageType, uint8_t *Ptrdata, uint16_t DataSize); +#endif + +#if defined(USBPDCORE_FASTROLESWAP) +/** + * @brief this function request PE to perform an FRS signalling. + * @param PortNum + * @retval None + */ +void USBPD_PE_ExecFastRoleSwapSignalling(uint8_t PortNum); +#endif +#endif /* USBPD_REV30_SUPPORT */ + +#if defined(USBPDCORE_SVDM) || defined(USBPDCORE_VCONN_SUPPORT) +/** + * @brief Called by DPM to request the PE to perform a VDM identity request. + * @note On PD2.0, SVDM Identity cannot be sent by UFP. + * @param PortNum Index of current used port + * @param SOPType SOP Type (Only SOP or SOP') + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_PE_SVDM_RequestIdentity(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType); + +/** + * @brief Called by DPM to request the PE to perform a VDM SVID request. + * @param PortNum Index of current used port + * @param SOPType SOP Type (only valid for SOP or SOP') + * @retval USBPD status: @ref USBPD_BUSY, @ref USBPD_OK, @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_SVDM_RequestSVID(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType); + +/** + * @brief Called by DPM to request the PE to perform a VDM Discovery mode message on one SVID. + * @param PortNum Index of current used port + * @param SOPType SOP Type + * @param SVID SVID used for discovery mode message + * @retval USBPD status: @ref USBPD_BUSY, @ref USBPD_OK, @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_SVDM_RequestMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID); + +/** + * @brief Called by DPM to request the PE to perform a VDM Discovery mode message on one SVID. + * @param PortNum Index of current used port + * @param SOPType SOP Type + * @param SVID SVID used for discovery mode message + * @param ModeIndex Index of the mode to be entered + * @retval USBPD status: @ref USBPD_BUSY, @ref USBPD_OK, @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_SVDM_RequestModeEnter(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint8_t ModeIndex); + +/** + * @brief Called by DPM to request the PE to perform a VDM mode exit. + * @param PortNum Index of current used port + * @param SOPType SOP Type + * @param SVID SVID used for discovery mode message + * @param ModeIndex Index of the mode to be exit + * @retval USBPD status: @ref USBPD_BUSY, @ref USBPD_OK, @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_SVDM_RequestModeExit(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint8_t ModeIndex); + +/** + * @brief Called by DPM to request the PE to send a specific SVDM message. + * @param PortNum Index of current used port + * @param SOPType Received message type based on @ref USBPD_SOPType_TypeDef + * @param Command VDM command based on @ref USBPD_VDM_Command_Typedef + * @param SVID Used SVID + * @retval USBPD status: @ref USBPD_BUSY, @ref USBPD_OK, @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_SVDM_RequestSpecific(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_Command_Typedef Command, uint16_t SVID); +#endif /* USBPDCORE_SVDM || USBPDCORE_VCONN_SUPPORT */ + +#if defined(USBPDCORE_SVDM) +/** + * @brief Called by DPM to request the PE to perform a VDM Attention. + * @param PortNum Index of current used port + * @param SOPType Received message type based on @ref USBPD_SOPType_TypeDef (valid with SOP only) + * @param SVID Used SVID + * @retval USBPD status: @ref USBPD_BUSY, @ref USBPD_OK, @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_SVDM_RequestAttention(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID); +#endif /* USBPDCORE_SVDM */ + +#if defined(USBPDCORE_UVDM) +/** + * @brief Called by DPM to request the PE to send a UVDM message. + * @param PortNum Index of current used port + * @param SOPType Received message type based on @ref USBPD_SOPType_TypeDef + * @retval USBPD status: @ref USBPD_BUSY, @ref USBPD_OK, @ref USBPD_FAIL + */ +USBPD_StatusTypeDef USBPD_PE_UVDM_RequestMessage(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType); +#endif /* USBPDCORE_UVDM */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup USBPD_CORE_PRL + * @{ + */ + +/** @defgroup USBPD_CORE_PRL_Exported_Functions USBPD CORE PRL Exported Functions + * @{ + */ + +/** @defgroup USBPD_CORE_PRL_Exported_Functions_Group1 USBPD CORE PRL Interface function for timer + * @{ + */ + +/** + * @brief Decrement The PRL Timers values + * @param PortNum port number value + * @retval None + */ +void USBPD_PRL_TimerCounter(uint8_t PortNum); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#if defined(USBPDCORE_TCPM_SUPPORT) +/** @addtogroup USBPD_CORE_TCPM + * @{ + */ + +/** @defgroup USBPD_CORE_TCPM_Exported_Functions USBPD CORE TCPM Exported Functions + * @{ + */ + +/** @defgroup USBPD_CORE_TCPM_Exported_Functions_Grp1 USBPD CORE TCPM Exported Functions to applications (DPM and PWR_IF) + * @{ + */ + +/** + * @brief Initialize TCPC devices + * @param PortNum Port number value + * @param TCPC_ToggleRole Indication if TCPC should perform a role toggle or not + * @param Params Pointer on PE parameters based on @ref USBPD_ParamsTypeDef + * @param CallbackFunctions Pointer on CAD callbacks + * @param TCPC_Driver Pointer on TCPC drivers based on @ref TCPC_DrvTypeDef + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_TCPM_HWInit(uint8_t PortNum, uint8_t TCPC_ToggleRole, USBPD_ParamsTypeDef *Params, USBPD_CAD_Callbacks *CallbackFunctions, TCPC_DrvTypeDef *TCPC_Driver); + +/** + * @brief Set CC line for PD connection + * @param PortNum Port number value + * @param Pull Power role can be one of the following values: + * @arg @ref TYPEC_CC_RA + * @arg @ref TYPEC_CC_RP + * @arg @ref TYPEC_CC_RD + * @arg @ref TYPEC_CC_OPEN + * @param State Activation or deactivation of connection + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_TCPM_set_cc(uint32_t PortNum, TCPC_CC_Pull_TypeDef Pull, USBPD_FunctionalState State); + +/** + * @brief Enable or disable VCONN + * @param PortNum Port number value + * @param State Activation or deactivation of VCONN + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_TCPM_set_vconn(uint32_t PortNum, USBPD_FunctionalState State); + +/** + * @brief Enable VBUS + * @param PortNum The port handle. + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_TCPM_VBUS_Enable(uint32_t PortNum); + +/** + * @brief Disable VBUS + * @param PortNum The port handle. + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_TCPM_VBUS_Disable(uint32_t PortNum); + +/** + * @brief Get VBUS voltage + * @param PortNum The port handle. + * @retval VBUS value in mV + */ +uint16_t USBPD_TCPM_VBUS_GetVoltage(uint32_t PortNum); + +/** + * @brief Retrieve the VBUS VSafe0 status for a specified port. + * @param PortNum The port handle. + * @retval USBPD_StatusTypeDef + */ +USBPD_StatusTypeDef USBPD_TCPM_VBUS_IsVsafe0V(uint32_t PortNum); + +/** + * @brief Retrieve the VBUS Vsafe5V status for a specified port. + * @param PortNum The port handle. + * @retval USBPD_StatusTypeDef + */ +USBPD_StatusTypeDef USBPD_TCPM_VBUS_IsVsafe5V(uint32_t PortNum); + +/** + * @brief Management of ALERT + * @param Event Event reported by application + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_TCPM_alert(uint32_t Event); + +/** + * @brief Force type C state machine to enter recovery state + * @param PortNum Index of current used port + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_TCPM_EnterErrorRecovery(uint32_t PortNum); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* USBPDCORE_TCPM_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_CORE_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_def.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_def.h new file mode 100644 index 0000000..c9ae512 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_def.h @@ -0,0 +1,3264 @@ +/** + ****************************************************************************** + * @file usbpd_def.h + * @author MCD Application Team + * @brief Global defines for USB-PD libarary + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +#ifndef __USBPD_DEF_H_ +#define __USBPD_DEF_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "cmsis_compiler.h" + +#include +#include + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_CORE + * @{ + */ + +/** @addtogroup USBPD_CORE_DEF + * @{ + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USBPD_CORE_DEF_Exported_Macros USBPD CORE DEF Exported Macros + * @{ + */ +/** + * @brief Compare two variables and return the smallest + * @param __VAR1__ First variable to be compared + * @param __VAR2__ Second variable to be compared + * @retval Returns the smallest variable + */ +#define USBPD_MIN(__VAR1__, __VAR2__) (((__VAR1__) > (__VAR2__))?(__VAR2__):(__VAR1__)) + +/** + * @brief Compare two variables and return the biggest + * @param __VAR1__ First variable to be compared + * @param __VAR2__ Second variable to be compared + * @retval Returns the biggest variable + */ +#define USBPD_MAX(__VAR1__, __VAR2__) (((__VAR1__) < (__VAR2__))?(__VAR2__):(__VAR1__)) + +/** + * @brief Check if the requested voltage is valid + * @param __MV__ Requested voltage in mV units + * @param __MAXMV__ Max Requested voltage in mV units + * @param __MINMV__ Min Requested voltage in mV units + * @retval 1 if valid voltage else 0 + */ +#define USBPD_IS_VALID_VOLTAGE(__MV__, __MAXMV__, __MINMV__) ((((__MV__) <= (__MAXMV__)) && ((__MV__) >= (__MINMV__)))? 1u: 0u) + +#define DIV_ROUND_UP(x, y) (((x) + ((y) - 1u)) / (y)) +#define MV2ADC(__X__) ( (__X__*4095) / 3300 ) +#define ADC2MV(__X__) ( (__X__*3300) / 4095 ) + +/* Macros for integer division with various rounding variants default integer + division rounds down. */ +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define MAX(a, b) (((a) > (b)) ? (a) : (b)) + +#define USPBPD_WRITE32(addr,data) do { \ + uint8_t bindex; \ + for(bindex = 0u; bindex < 4u; bindex++) \ + { \ + ((uint8_t *)addr)[bindex] = ((uint8_t)(data >> (8u * bindex)) & 0x000000FFu); \ + } \ + } while(0u); + +#define LE16(addr) (((uint16_t)(*((uint8_t *)(addr))))\ + + (((uint16_t)(*(((uint8_t *)(addr)) + 1u))) << 8u)) + +#define LE32(addr) ((((uint32_t)(*(((uint8_t *)(addr)) + 0u))) + \ + (((uint32_t)(*(((uint8_t *)(addr)) + 1u))) << 8u) + \ + (((uint32_t)(*(((uint8_t *)(addr)) + 2u))) << 16u) + \ + (((uint32_t)(*(((uint8_t *)(addr)) + 3u))) << 24))) + +/** + * @} + */ + +/* Exported defines --------------------------------------------------------*/ +/** @defgroup USBPD_CORE_DEF_Exported_Defines USBPD CORE DEF Exported Defines + * @{ + */ +#define USBPD_TRUE 1u +#define USBPD_FALSE 0u + +#define __DEBUG_PESTATEMACHINE + + +/** @defgroup USBPD_CORE_DEF_Exported_Defines_Swiches USBPD Compilations switches + * @brief List of compilation switches which can be used to reduce size of the CORE library + * @{ + */ +#if defined(USBPDCORE_LIB_NO_PD) +#define USBPDCORE_NOPD +#else +/* Default Switch */ +#define USBPDCORE_GOTOMIN +#define USBPDCORE_BIST +#define USBPDCORE_GETSNKCAP +#define USBPDCORE_GETSRCCAP +#define USBPDCORE_GIVESNKCAP +#define USBPDCORE_ERROR_RECOVERY + +#if defined(USBPDCORE_LIB_PD3_FULL) || defined(USBPDCORE_LIB_PD3_CONFIG_1) || defined(USBPD_TCPM_LIB_PD3_FULL) || defined(USBPD_TCPM_LIB_PD3_CONFIG_1) || defined(USBPDCORE_LIB_PD3_CONFIG_MINSRC) || defined(USBPDCORE_LIB_PD3_CONFIG_MINSNK) + +/* + USBPDCORE_LIB_PD3_FULL + USBPDCORE_LIB_PD3_CONFIG_1 : NO VDM + USBPDCORE_LIB_PD3_CONFIG_MINSRC : ONLY SRC and NO option + USBPDCORE_LIB_PD3_CONFIG_MINSNK : ONLY SNK, and NO option + USBPD_TCPM_LIB_PD3_FULL : PD3.0 TCPM FULL + USBPD_TCPM_LIB_PD3_CONFIG_1 : PD3.0 TCPM FULL without VDM +*/ +#define USBPD_REV30_SUPPORT + +#if !defined(USBPDCORE_LIB_PD3_CONFIG_MINSNK) +#define USBPDCORE_SRC +#endif + +#if !defined(USBPDCORE_LIB_PD3_CONFIG_MINSRC) +#define USBPDCORE_SNK +#define USBPDCORE_SNK_CAPA_EXT +#endif + +#if defined(USBPDCORE_LIB_PD3_FULL) || defined(USBPD_TCPM_LIB_PD3_FULL) +#define USBPDCORE_SVDM +#endif /* USBPDCORE_LIB_PD3_FULL || USBPD_TCPM_LIB_PD3_FULL */ + +#if defined(USBPDCORE_LIB_PD3_CONFIG_MINSNK)||defined(USBPDCORE_LIB_PD3_CONFIG_MINSRC) +#else +#define USBPDCORE_DRP +#define USBPDCORE_UVDM +#define USBPDCORE_FASTROLESWAP +#define USBPDCORE_PPS +#define USBPDCORE_ALERT +#define USBPDCORE_SRC_CAPA_EXT +#define USBPDCORE_STATUS +#define USBPDCORE_BATTERY +#define USBPDCORE_MANU_INFO +#define USBPDCORE_SECURITY_MSG +#define USBPDCORE_FWUPD +#define USBPDCORE_COUNTRY_MSG +#define USBPDCORE_VCONN_SUPPORT +#define USBPDCORE_DATA_SWAP +#define USBPDCORE_PING_SUPPORT +#endif /* USBPDCORE_LIB_PD3_CONFIG_MINSNK || USBPDCORE_LIB_PD3_CONFIG_MINSRC */ + +#if defined(USBPD_TCPM_LIB_PD3_FULL) || defined(USBPD_TCPM_LIB_PD3_CONFIG_1) +#define USBPDCORE_TCPM_SUPPORT +#endif /* TCPM */ + +#endif /* PD3.0 */ + +/* List of compilation switches which can be used to reduce size of the CORE librairy */ +#if defined(USBPDCORE_LIB_PD2_FULL) || defined(USBPDCORE_LIB_PD2_CONFIG_1) || defined(USBPDCORE_LIB_PD2_CONFIG_MINSRC) || defined(USBPDCORE_LIB_PD2_CONFIG_MINSNK) || defined(USBPD_TCPM_LIB_PD2_FULL) || defined(USBPD_TCPM_LIB_PD2_CONFIG_1) || defined(USBPD_TCPM_LIB_PD2_MINSRC) || defined(USBPD_TCPM_LIB_PD2_MINSNK) +/* + USBPDCORE_LIB_PD2_FULL + USBPDCORE_LIB_PD2_CONFIG_1 : NO VDM + USBPDCORE_LIB_PD2_CONFIG_MINSRC : ONLY SRC and NO option + USBPDCORE_LIB_PD2_CONFIG_MINSNK : ONLY SNK, and NO option + USBPD_TCPM_LIB_PD2_FULL : PD2.0 TCPM FULL + USBPD_TCPM_LIB_PD2_CONFIG_1 : PD2.0 TCPM FULL without VDM + USBPD_TCPM_LIB_PD2_MINSRC : PD2.0 TCPM Only SRC + USBPD_TCPM_LIB_PD2_MINSNK : PD2.0 TCPM Only SNK +*/ +#define USBPD_REV20_SUPPORT + +#if !defined(USBPDCORE_LIB_PD2_CONFIG_MINSNK) && !defined(USBPD_TCPM_LIB_PD2_MINSNK) +#define USBPDCORE_SRC +#endif + +#if !defined(USBPDCORE_LIB_PD2_CONFIG_MINSRC) && !defined(USBPD_TCPM_LIB_PD2_MINSRC) +#define USBPDCORE_SNK +#endif + +#if defined(USBPDCORE_LIB_PD2_CONFIG_MINSRC) || defined(USBPDCORE_LIB_PD2_CONFIG_MINSNK) || defined(USBPD_TCPM_LIB_PD2_MINSRC) || defined(USBPD_TCPM_LIB_PD2_MINSNK) +#else +#define USBPDCORE_DRP +#define USBPDCORE_VCONN_SUPPORT +#define USBPDCORE_DATA_SWAP +#define USBPDCORE_UVDM +#endif + +#if defined(USBPDCORE_LIB_PD2_FULL) || defined(USBPD_TCPM_LIB_PD2_FULL) +#define USBPDCORE_SVDM +#endif /* USBPDCORE_LIB_PD3_FULL || USBPD_TCPM_LIB_PD2_FULL */ + +#if defined(USBPD_TCPM_LIB_PD2_FULL) || defined(USBPD_TCPM_LIB_PD2_CONFIG_1) || defined(USBPD_TCPM_LIB_PD2_MINSRC) || defined(USBPD_TCPM_LIB_PD2_MINSNK) +#define USBPDCORE_TCPM_SUPPORT +#endif /* TCPM */ + +#endif /* PD2.0 */ + +#if defined(USBPDCORE_LIB_PD3_CONFIG_2) +#undef USBPDCORE_GOTOMIN +#undef USBPDCORE_BIST +#undef USBPDCORE_GETSNKCAP +#undef USBPDCORE_GETSRCCAP +#undef USBPDCORE_GIVESNKCAP +#undef USBPDCORE_SNK_CAPA_EXT + +#define USBPDCORE_SNK +#define USBPD_REV30_SUPPORT +#define USBPDCORE_FWUPD +#define USBPDCORE_UVDM +#endif /* USBPDCORE_LIB_PD3_CONFIG_2 */ + +/* No need to enable USBPDCORE_UNCHUNCKED_MODE if FW Update et Security messages are not supported by the configuration */ +#if defined(USBPDCORE_SECURITY_MSG) || defined(USBPDCORE_FWUPD) +#define USBPDCORE_UNCHUNCKED_MODE +#endif /* USBPDCORE_SECURITY_MSG || USBPDCORE_FWUPD */ + +#endif /* USBPDCORE_LIB_NO_PD */ + +/* _LIB_ID definition */ +/* + _LIB_ID constructs like this: 0xXYVVVWWW + * X: 3 (PD3.0) or 2 (PD2.0) + * Y: 0 (CORE) or 1 (TCPM) + * VVV: Stack version (ex 200 for Stack 2.0.0) + * WWW: 0 (FULL VERSION) or config_x +*/ +/* Defines for PD revision */ +#define LIB_PD_VERSION_POS 28u +#define LIB_PD_VERSION_MSK (0xFu << LIB_PD_VERSION_POS) +#define LIB_PD2 (2u << LIB_PD_VERSION_POS) +#define LIB_PD3 (3u << LIB_PD_VERSION_POS) +/* Defines for CORE or TCPM */ +#define LIB_CORE_TCPM_POS 24u +#define LIB_CORE_TCPM_MSK (0xFu << LIB_CORE_TCPM_POS) +#define LIB_CORE (0u << LIB_CORE_TCPM_POS) +#define LIB_TCPM (1u << LIB_CORE_TCPM_POS) +/* Defines for STACK version */ +#define LIB_STACK_VER_POS 12u +#define LIB_STACK_VER_MSK (0xFFFu << LIB_STACK_VER_POS) +#define LIB_STACK_VER (0x320u << LIB_STACK_VER_POS) +/* Defines for configuration */ +#define LIB_CONFIG_MSK 0xFFFu +#define LIB_FULL 0x000u +#define LIB_CONFIG_1 0x001u +#define LIB_CONFIG_MINSRC 0x002u +#define LIB_CONFIG_MINSNK 0x004u +#define LIB_CONFIG_2 0x010u +#define LIB_CONFIG_NOPD 0x100u + +#ifdef USBPDCORE_LIB_PD3_FULL +#define _LIB_ID (LIB_PD3 | LIB_CORE | LIB_STACK_VER | LIB_FULL) +#endif +#ifdef USBPDCORE_LIB_PD3_CONFIG_1 +#define _LIB_ID (LIB_PD3 | LIB_CORE | LIB_STACK_VER | LIB_CONFIG_1) +#endif +#ifdef USBPDCORE_LIB_PD2_FULL +#define _LIB_ID (LIB_PD2 | LIB_CORE | LIB_STACK_VER | LIB_FULL) +#endif +#ifdef USBPDCORE_LIB_PD2_CONFIG_1 +#define _LIB_ID (LIB_PD2 | LIB_CORE | LIB_STACK_VER | LIB_CONFIG_1) +#endif +#ifdef USBPDCORE_LIB_PD2_CONFIG_MINSRC +#define _LIB_ID (LIB_PD2 | LIB_CORE | LIB_STACK_VER | LIB_CONFIG_MINSRC) +#endif +#ifdef USBPDCORE_LIB_PD3_CONFIG_MINSRC +#define _LIB_ID (LIB_PD3 | LIB_CORE | LIB_STACK_VER | LIB_CONFIG_MINSRC) +#endif +#ifdef USBPDCORE_LIB_PD2_CONFIG_MINSNK +#define _LIB_ID (LIB_PD2 | LIB_CORE | LIB_STACK_VER | LIB_CONFIG_MINSNK) +#endif +#ifdef USBPDCORE_LIB_PD3_CONFIG_MINSNK +#define _LIB_ID (LIB_PD3 | LIB_CORE | LIB_STACK_VER | LIB_CONFIG_MINSNK) +#endif +#ifdef USBPD_TCPM_LIB_PD2_FULL +#define _LIB_ID (LIB_PD2 | LIB_TCPM | LIB_STACK_VER | LIB_FULL) +#endif +#ifdef USBPD_TCPM_LIB_PD2_MINSRC +#define _LIB_ID (LIB_PD2 | LIB_TCPM | LIB_STACK_VER | LIB_CONFIG_MINSRC) +#endif +#ifdef USBPD_TCPM_LIB_PD2_MINSNK +#define _LIB_ID (LIB_PD2 | LIB_TCPM | LIB_STACK_VER | LIB_CONFIG_MINSNK) +#endif +#ifdef USBPD_TCPM_LIB_PD2_CONFIG_1 +#define _LIB_ID (LIB_PD2 | LIB_TCPM | LIB_STACK_VER | LIB_CONFIG_1) +#endif +#ifdef USBPD_TCPM_LIB_PD3_CONFIG_1 +#define _LIB_ID (LIB_PD3 | LIB_TCPM | LIB_STACK_VER | LIB_CONFIG_1) +#endif +#ifdef USBPD_TCPM_LIB_PD3_FULL +#define _LIB_ID (LIB_PD3 | LIB_TCPM | LIB_STACK_VER | LIB_FULL) +#endif +#if defined(USBPDCORE_LIB_PD3_CONFIG_2) +#define _LIB_ID (LIB_PD3 | LIB_TCPM | LIB_STACK_VER | LIB_CONFIG_2) +#endif +#if defined(USBPDCORE_LIB_NO_PD) +#define _LIB_ID (LIB_STACK_VER | LIB_CONFIG_NOPD) +#endif +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +#define USBPD_PORT_0 (0U) /*!< Port 0 identifier */ +#define USBPD_PORT_1 (1U) /*!< Port 1 identifier */ + +#define USBPD_MAX_NB_PDO (7U) /*!< Maximum number of supported Power Data Objects: fix by the Specification */ +#define BIST_CARRIER_MODE_MS (50U) /*!< Time in ms of the BIST signal*/ + +/* + @brief Maximum size of the RX buffer allocated in the stack to receive a PD frame + @note TX buffer size is used internally in the stack (size if available in @ref USBPD_PHY_SendMessage) + */ +#if defined(USBPDCORE_UNCHUNCKED_MODE) +#define USBPD_MAX_RX_BUFFER_SIZE (264U) /*!< Maximum size of Rx buffer used when unchuncked is supported by the stack */ +#else +#define USBPD_MAX_RX_BUFFER_SIZE (30U) /*!< Maximum size of Rx buffer used when unchuncked is NOT supported by the stack */ +#endif /* USBPDCORE_UNCHUNCKED_MODE */ + +/* + * Maximum size of a Power Delivery packet (in bits on the wire) : + * 16-bit header + 0..7 32-bit data objects (+ 4b5b encoding) + * 64-bit preamble + SOP (4x 5b) + header (16-bit) + message in 4b5b + 32-bit CRC + EOP (1x 5b) + * = 64bit + 4*5bit + 16bit * 5/4 + 7 * 32bit * 5/4 + 32bit * 5/4 + 5 + */ +#define PHY_BIT_LEN ((uint16_t)429u) +#define PHY_MAX_RAW_SIZE ((uint16_t)((PHY_BIT_LEN*2u) + 3u)) +#define PHY_MAX_RAW_BYTE_SIZE ((uint8_t)60u) /*! 70ns (>~7m) for P2.0 or 1000ns (~100m) for P3.0 */ +#if defined(USBPD_REV30_SUPPORT) + ,CABLE_LATENCY_2000NS = 9u, /*!< 2000ns (~200m) */ + CABLE_LATENCY_3000NS = 10u /*!< 3000ns (~300m) */ +#endif /* USBPD_REV30_SUPPORT */ +} USBPD_CableLatency; + +/** + * @} + */ + +/** + * @brief Cable maximun VBUS voltage + * @{ + */ +#define VBUS_MAX_20V 0u +#define VBUS_MAX_30V 1u +#define VBUS_MAX_40V 2u +#define VBUS_MAX_50V 3u + +typedef uint32_t USBPD_CableMaxVoltage; + +/** + * @} + */ + +/** + * @brief Cable Termination Type in Active/Passive cable + * @{ + */ +#define CABLE_TERM_BOTH_PASSIVE_NO_VCONN 0u /*!< VCONN not required (PD2.0 only) */ +#define CABLE_TERM_BOTH_PASSIVE_VCONN 1u /*!< VCONN required (PD2.0 only) */ +#if defined(USBPD_REV30_SUPPORT) +#define CABLE_TERM_ONE_EACH_VCONN 2u /*!< One end Active, one end passive, VCONN required */ +#define CABLE_TERM_BOTH_ACTIVE_VCONN 3u /*!< Both ends Active, VCONN required */ +#endif /* USBPD_REV30_SUPPORT */ + +typedef uint32_t USBPD_CableTermType; + +/** + * @} + */ + +#if defined(USBPD_REV30_SUPPORT) +/** + * @brief Maximum Cable VBUS Voltage in Active/Passive cable + * @{ + */ +#define VBUS_20V 0u /*!< Maximum Cable VBUS Voltage 20V */ +#define VBUS_30V 1u /*!< Maximum Cable VBUS Voltage 30V */ +#define VBUS_40V 2u /*!< Maximum Cable VBUS Voltage 40V */ +#define VBUS_50V 3u /*!< Maximum Cable VBUS Voltage 50V */ + +typedef uint32_t USBPD_VBUSMaxVoltage; + +/** + * @} + */ + +/** + * @brief Active cable - SBU Supported + * @{ + */ +#define ACTIVE_CABLE_SBU_NOT_SUPPORTED 0u /*!< SBUs connections not supported */ +#define ACTIVE_CABLE_SBU_SUPPORTED 1u /*!< SBUs connections supported */ + +typedef uint32_t USBPD_ActiveCableSBUSupported; + +/** + * @} + */ + +/** + * @brief Active cable - SBU Type (valid only if SBU Connection is supported @ref ACTIVE_CABLE_SBU_SUPPORTED) + * @{ + */ +#define ACTIVE_CABLE_SBU_TYPE_PASSIVE 0u /*!< SBU is passive */ +#define ACTIVE_CABLE_SBU_TYPE_ACTIVE 1u /*!< SBU is active */ + +typedef uint32_t USBPD_ActiveCableSBUType; + +/** + * @} + */ + +/** + * @brief UFP VDO - Device capability + * @{ + */ +#define DEVICE_CAPABILITY_USB2P0 0u /*!< [USB 2.0] Device Capable */ +#define DEVICE_CAPABILITY_USB2P0_BILLBOARD 1u /*!< [USB 2.0] Device Capable (Billboard only) */ +#define DEVICE_CAPABILITY_USB3P2 2u /*!< [USB 3.2] Device Capable */ +#define DEVICE_CAPABILITY_USB4 3u /*!< [USB4] Device Capable */ + +typedef uint32_t USBPD_VDO_UFP_DeviceCapability; + +/** + * @} + */ + +/** + * @brief UFP VDO - Alternate Modes + * @{ + */ +#define ALTERNATE_MODES_TBT3 0u /*!< Supports [TBT3] Alternate Mode */ +#define ALTERNATE_MODES_RECONFIG_TYPEC_2P0 1u /*!< Supports Alternate Modes that reconfigure the signals on the [USB Type-C 2.0] connector – except for [TBT3]. */ +#define ALTERNATE_MODES_NO_RECONFIG_TYPEC_2P0 2u /*!< Supports Alternate Modes that do not reconfigure the signals on the [USB Type-C 2.0] connector */ + +typedef uint32_t USBPD_VDO_UFP_AlternateModes; + +/** + * @} + */ + +/** + * @brief DFP VDO - Host capability + * @{ + */ +#define HOST_CAPABILITY_USB2P0 0u /*!< [USB 2.0] Host Capable */ +#define HOST_CAPABILITY_USB3P2 1u /*!< [USB 3.2] Host Capable */ +#define HOST_CAPABILITY_USB4 2u /*!< [USB4] Host Capable */ + +typedef uint32_t USBPD_VDO_DFP_HostCapability; + +/** + * @} + */ + +#endif /* USBPD_REV30_SUPPORT */ + +/** + * @brief configurability of SS Directionality in Active/Passive cable and AMA VDO (PD2.0 only) + * @{ + */ +#define SS_DIR_FIXED 0u /*!< SSTX Directionality Support Fixed */ +#define SS_DIR_CONFIGURABLE 1u /*!< SSTX Directionality Support Configurable */ + +typedef uint32_t USBPD_SsDirectionality; + +/** + * @} + */ + +/** + * @brief SVDM commands definition + */ +#define SVDM_RESERVEDCOMMAND 0x00u +#define SVDM_DISCOVER_IDENTITY 0x01u +#define SVDM_DISCOVER_SVIDS 0x02u +#define SVDM_DISCOVER_MODES 0x03u +#define SVDM_ENTER_MODE 0x04u +#define SVDM_EXIT_MODE 0x05u +#define SVDM_ATTENTION 0x06u +#define SVDM_SPECIFIC_1 0x10u +#define SVDM_SPECIFIC_2 0x11u +#define SVDM_SPECIFIC_3 0x12u +#define SVDM_SPECIFIC_4 0x13u +#define SVDM_SPECIFIC_5 0x14u +#define SVDM_SPECIFIC_6 0x15u +#define SVDM_SPECIFIC_7 0x16u +#define SVDM_SPECIFIC_8 0x17u +#define SVDM_SPECIFIC_9 0x18u +#define SVDM_SPECIFIC_10 0x19u +#define SVDM_SPECIFIC_11 0x1Au +#define SVDM_SPECIFIC_12 0x1Bu +#define SVDM_SPECIFIC_13 0x1Cu +#define SVDM_SPECIFIC_14 0x1Du +#define SVDM_SPECIFIC_15 0x1Eu +#define SVDM_SPECIFIC_16 0x1Fu + +typedef uint32_t USBPD_VDM_Command_Typedef; + +/** + * @brief VBUS Current Handling Capability in Active/Passive cable VDO + * @{ + */ +#define VBUS_DEFAULT 0u /*!< USB Type-C Default Current */ +#define VBUS_3A 1u /*!< VBUS Current Handling Capability 3A */ +#define VBUS_5A 2u /*!< VBUS Current Handling Capability 5A */ + +typedef uint32_t USBPD_VBUSCurrentHandCap; + +/** + * @} + */ + +/** + * @brief USB Superspeed Signaling Support in Active/Passive cable VDO + * @{ + */ +#define USB2P0_ONLY 0u /*!< [USB 2.0] only, no SuperSpeed support */ +#define USB3P2_GEN1 1u /*!< [USB 3.2] Gen1 */ +#define USB3P2_USB4_GEN2 2u /*!< [USB 3.2]/[USB4] Gen2 */ +#if defined(USBPD_REV30_SUPPORT) +#define USB4_GEN3 3u /*!< [USB4] Gen3 */ +#endif /* USBPD_REV30_SUPPORT */ + +/* Used for legacy */ +#define USB3P1_GEN1 USB3P2_GEN1 /*!< USB3.1 Gen1 and USB2.0 */ +#define USB3P1_GEN1N2 USB3P2_USB4_GEN2 /*!< USB3.1 Gen1, Gen2 and USB2.0*/ + +typedef uint32_t USBPD_UsbSsSupport; +/** + * @} + */ + +/** + * @brief Power needed by adapter for full functionality in AMA VDO header + * @{ + */ +typedef enum +{ + VCONN_1W = 0u, /*!< VCONN power 1W */ + VCONN_1P5W = 1u, /*!< VCONN power 1.5W */ + VCONN_2W = 2u, /*!< VCONN power 2W */ + VCONN_3W = 3u, /*!< VCONN power 3W */ + VCONN_4W = 4u, /*!< VCONN power 4W */ + VCONN_5W = 5u, /*!< VCONN power 5W */ + VCONN_6W = 6u, /*!< VCONN power 6W */ +} USBPD_VConnPower; + +/** + * @} + */ + +/** + * @brief VCONN being required by an adapter in AMA VDO header + * @{ + */ +typedef enum +{ + VCONN_NOT_REQUIRED = 0u, /*!< VCONN not required */ + VCONN_REQUIRED = 1u, /*!< VCONN required */ +} USBPD_VConnRequirement; + +/** + * @} + */ + +/** + * @brief VBUS being required by an adapter in AMA VDO header + * @{ + */ +typedef enum +{ + VBUS_NOT_REQUIRED = 0u, /*!< VBUS not required */ + VBUS_REQUIRED = 1u, /*!< VBUS required */ +} USBPD_VBusRequirement; + +/** + * @} + */ + +#if defined(USBPD_REV30_SUPPORT) +#if defined(USBPDCORE_VPD) +/** + * @brief Vconn Powered USB Device VDO - Charge Through Current Support + * @{ + */ +#define VPD_CHARGE_THROUGH_NOT_SUPPORTED 0u /*!< the VPD does not support Charge Through */ +#define VPD_CHARGE_THROUGH_SUPPORTED 1u /*!< the VPD supports Charge Through */ + +typedef uint32_t USBPD_VDO_VPD_ChargeSupport; +/** + * @} + */ + +/** + * @brief Vconn Powered USB Device VDO - Charge Through Support + * @{ + */ +#define VPD_CHARGE_CURRENT_3A 0u /*!< 3A capable */ +#define VPD_CHARGE_CURRENT_5A 1u /*!< 5A capable */ + +typedef uint32_t USBPD_VDO_VPD_ChargeCurrent; +/** + * @} + */ +#endif /* USBPDCORE_VPD */ +#endif /* USBPD_REV30_SUPPORT */ + +#define SVDM_INITIATOR 0x00u +#define SVDM_RESPONDER_ACK 0x01u +#define SVDM_RESPONDER_NAK 0x02u +#define SVDM_RESPONDER_BUSY 0x03u +#define SVDM_CABLE_TIMEOUT 0x04u /*!< Indication that cable is PD capable but no answer to VDM Discovery identity */ +#define SVDM_CABLE_NO_PD_CAPABLE 0x05u /*!< Indication that cable is not PD capable (no goodCRC to VDM Discovery identity */ + +typedef uint32_t USBPD_VDM_CommandType_Typedef; + +/** + * @brief AMA USB Superspeed Signaling Support in AMA VDO header + * @{ + */ + +#define AMA_USB2P0_ONLY 0u /*!< [USB 2.0] only, no SuperSpeed support */ +#define AMA_USB3P2_GEN1 1u /*!< [USB 3.2] Gen1 and USB 2.0 */ +#define AMA_USB3P2_GEN1N2 2u /*!< [USB 3.2] Gen1, Gen2 and USB 2.0 */ +#define AMA_USB2P0_BILLBOARD 3u /*!< [USB 2.0] billboard only */ + +/* Keep for legacy reasons */ +#define AMA_USB3P1_GEN1 USB3P2_GEN1 /*!< USB3.1 Gen1 and USB2.0 */ +#define AMA_USB3P1_GEN1N2 AMA_USB3P2_GEN1N2 /*!< USB3.1 Gen1, Gen2 and USB2.0 */ + +typedef uint32_t USBPD_AmaUsbSsSupport; + +/** + * @} + */ + +/** + * @} + */ + +#if defined(USBPDCORE_FWUPD) +/** + * @brief USBPD Firmware Update Status Information + * @{ + */ +typedef enum +{ + USBPD_FWUPD_STATUS_OK = 0x00u, /*!< Request completed successfully or delayed */ + USBPD_FWUPD_STATUS_ERR_TARGET = 0x01u, /*!< FW not targeted for this device */ + USBPD_FWUPD_STATUS_ERR_FILE = 0x02u, /*!< Fails vendor-specific verification test */ + USBPD_FWUPD_STATUS_ERR_WRITE = 0x03u, /*!< Unable to write memory */ + USBPD_FWUPD_STATUS_ERR_ERASE = 0x04u, /*!< Memory erase function failed */ + USBPD_FWUPD_STATUS_ERR_CHECK_ERASED = 0x05u, /*!< Memory erase check failed */ + USBPD_FWUPD_STATUS_ERR_PROG = 0x06u, /*!< Program memory function failed */ + USBPD_FWUPD_STATUS_ERR_VERIFY = 0x07u, /*!< Program memory failed verification */ + USBPD_FWUPD_STATUS_ERR_ADDRESS = 0x08u, /*!< Received address is out of range */ + USBPD_FWUPD_STATUS_ERR_NOTDONE = 0x09u, /*!< Received PDFU_DATA Request with a zero length Data Block, but the + PDFU Responder expects more data */ + USBPD_FWUPD_STATUS_ERR_FIRMWARE = 0x0Au, /*!< Device's firmware is corrupt. It cannot return to normal operations. */ + USBPD_FWUPD_STATUS_ERR_POR = 0x0Du, /*!< Unexpected power on reset */ + USBPD_FWUPD_STATUS_ERR_UNKNOWN = 0x0Eu, /*!< Something went wrong */ + USBPD_FWUPD_STATUS_ERR_UNEXPECTED_HARD_RESET = 0x80u, /*!< Used when firmware update starts after a hard reset (enumeration, etc.) + that occurred in the middle of firmware update */ + USBPD_FWUPD_STATUS_ERR_UNEXPECTED_SOFT_RESET = 0x81u, /*!< Used when firmware update starts after soft reset (new power contract, etc.) + that occurred in the middle of firmware update */ + USBPD_FWUPD_STATUS_ERR_UNEXPECTED_REQUEST = 0x82u, /*!< PDFU Responder received a request that is not appropriate for the current Phase */ + USBPD_FWUPD_STATUS_ERR_REJECT_PAUSE = 0x83u, /*!< PDFU Responder is unable or unwilling to pause a firmware image transfer */ +} USBPD_FWUPD_Status_TypeDef; +/** + * @} + */ +#endif /* USBPDCORE_FWUPD */ + +/** @defgroup USBPD_CORE_DataInfoType_TypeDef USB CORE Data information type + * @brief Data Infor types used in PE callbacks (USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) + * @{ + */ +typedef enum +{ + USBPD_CORE_DATATYPE_SRC_PDO = 0x00u, /*!< Handling of port Source PDO + (SRC or DRP configuration used only in USBPD_PE_GetDataInfo) */ + USBPD_CORE_DATATYPE_SNK_PDO = 0x01u, /*!< Handling of port Sink PDO, requested by get sink capa + (SNK or DRP configuration used only in USBPD_PE_GetDataInfo) */ + USBPD_CORE_DATATYPE_RDO_POSITION = 0x02u, /*!< Reset the PDO position selected by the sink only + (used only in USBPD_PE_SetDataInfo) */ + USBPD_CORE_DATATYPE_REQ_VOLTAGE = 0x03u, /*!< Get voltage value requested for BIST tests, expect 5V + (used only in USBPD_PE_GetDataInfo) */ + USBPD_CORE_DATATYPE_RCV_SRC_PDO = 0x04u, /*!< Storage of Received Source PDO values + (used only in USBPD_PE_SetDataInfo) */ + USBPD_CORE_DATATYPE_RCV_SNK_PDO = 0x05u, /*!< Storage of Received Sink PDO values + (used only in USBPD_PE_SetDataInfo) */ + USBPD_CORE_DATATYPE_RCV_REQ_PDO = 0x06u, /*!< Storage of Received Sink Request PDO value + (SRC or DRP configuration used in USBPD_PE_SetDataInfo) */ + USBPD_CORE_DATATYPE_REQUEST_DO = 0x07u, /*!< Not used - keep for legacy reason */ + USBPD_CORE_EXTENDED_CAPA = 0x08u, /*!< Source Extended capability message content + (used in USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) */ + USBPD_CORE_INFO_STATUS = 0x09u, /*!< Information status message content + (used in USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) */ + USBPD_CORE_PPS_STATUS = 0x0Au, /*!< PPS Status message content + (used in USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) */ + USBPD_CORE_ALERT , /*!< Storing of received Alert message content + (used only in USBPD_PE_SetDataInfo) */ + USBPD_CORE_GET_MANUFACTURER_INFO , /*!< Storing of received Get Manufacturer info message content + (used only in USBPD_PE_SetDataInfo) */ + USBPD_CORE_MANUFACTURER_INFO , /*!< Retrieve of Manufacturer info message content + (used in USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) */ + USBPD_CORE_GET_BATTERY_STATUS , /*!< Storing of received Get Battery status message content + (used only in USBPD_PE_SetDataInfo) */ + USBPD_CORE_BATTERY_STATUS , /*!< Retrieve of Battery status message content + (used in USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) */ + USBPD_CORE_GET_BATTERY_CAPABILITY , /*!< Storing of received Get Battery capability message content + (used only in USBPD_PE_SetDataInfo) */ + USBPD_CORE_BATTERY_CAPABILITY , /*!< Retrieve of Battery capability message content + (used in USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) */ + USBPD_CORE_UNSTRUCTURED_VDM , /*!< Not used - keep for legacy reason */ +#if defined(USBPDCORE_SNK_CAPA_EXT) + USBPD_CORE_SNK_EXTENDED_CAPA , /*!< Storing and retrieve of Sink Extended capability message content + (used in USBPD_PE_GetDataInfo and USBPD_PE_SetDataInfo) */ +#endif /* USBPDCORE_SNK_CAPA_EXT */ +} USBPD_CORE_DataInfoType_TypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup USBPD_CORE_DEF_Exported_TypeDef USBPD CORE DEF Exported TypeDef + * @{ + */ + +#if defined(USBPD_REV30_SUPPORT) && defined(USBPDCORE_PPS) +/** + * @brief USB PD Programmable Power Supply APDO Structure definition (same for SRC and SNK) + * + */ +typedef struct +{ + uint32_t MaxCurrentIn50mAunits : 7u; /*!< Maximum Current in 50mA increments */ + uint32_t Reserved1 : 1u; /*!< Reserved - Shall be set to zero */ + uint32_t MinVoltageIn100mV : 8u; /*!< Minimum Voltage in 100mV increments */ + uint32_t Reserved2 : 1u; /*!< Reserved - Shall be set to zero */ + uint32_t MaxVoltageIn100mV : 8u; /*!< Maximum Voltage in 100mV increments */ + uint32_t Reserved3 : 2u; /*!< Reserved - Shall be set to zero */ + uint32_t PPSPowerLimited : 1u; /*!< PPS Power Limited Bit */ + uint32_t ProgrammablePowerSupply: 2u; /*!< 00b - Programmable Power Supply */ + uint32_t PPS_APDO : 2u; /*!< 11b - Augmented Power Data Object (APDO) */ +} USBPD_ProgrammablePowerSupplyAPDO_TypeDef; + +#endif /*_USBPD_REV30_SUPPORT && PPS*/ + +/** + * @brief USB PD Source Fixed Supply Power Data Object Structure definition + * + */ +typedef struct +{ + uint32_t MaxCurrentIn10mAunits : 10u; + uint32_t VoltageIn50mVunits : 10u; + USBPD_CORE_PDO_PeakCurr_TypeDef PeakCurrent : 2u; +#if defined(USBPD_REV30_SUPPORT) + uint32_t Reserved22_23 : 2u; + uint32_t UnchunkedExtendedMessage : 1u; +#else + uint32_t Reserved22_24 : 3u; +#endif /* USBPD_REV30_SUPPORT */ + USBPD_CORE_PDO_DRDataSupport_TypeDef DataRoleSwap : 1u; + USBPD_CORE_PDO_USBCommCapable_TypeDef USBCommunicationsCapable : 1u; + USBPD_CORE_PDO_ExtPowered_TypeDef ExternallyPowered : 1u; + USBPD_CORE_PDO_USBSuspendSupport_TypeDef USBSuspendSupported : 1u; + USBPD_CORE_PDO_DRPowerSupport_TypeDef DualRolePower : 1u; + USBPD_CORE_PDO_Type_TypeDef FixedSupply : 2u; + +} USBPD_SRCFixedSupplyPDO_TypeDef; + +/** + * @brief USB PD Source Variable Supply Power Data Object Structure definition + * + */ +typedef struct +{ + uint32_t MaxCurrentIn10mAunits : + 10u; + uint32_t MinVoltageIn50mVunits : + 10u; + uint32_t MaxVoltageIn50mVunits : + 10u; + uint32_t VariableSupply : + 2u; +} USBPD_SRCVariableSupplyPDO_TypeDef; + +/** + * @brief USB PD Source Battery Supply Power Data Object Structure definition + * + */ +typedef struct +{ + uint32_t MaxAllowablePowerIn250mWunits : + 10u; + uint32_t MinVoltageIn50mVunits : + 10u; + uint32_t MaxVoltageIn50mVunits : + 10u; + uint32_t Battery : + 2u; +} USBPD_SRCBatterySupplyPDO_TypeDef; + +/** + * @brief USB PD Sink Fixed Supply Power Data Object Structure definition + * + */ +typedef struct +{ + uint32_t OperationalCurrentIn10mAunits : + 10u; + uint32_t VoltageIn50mVunits : + 10u; +#if defined(USBPD_REV30_SUPPORT) + uint32_t FastRoleSwapRequiredCurrent : + 2u; + uint32_t Reserved20_22 : + 3u; +#else + uint32_t Reserved20_24 : + 5u; +#endif /* USBPD_REV30_SUPPORT */ + uint32_t DataRoleSwap : + 1u; + uint32_t USBCommunicationsCapable : + 1; + uint32_t ExternallyPowered : + 1u; + uint32_t HigherCapability : + 1u; + uint32_t DualRolePower : + 1u; + uint32_t FixedSupply : + 2u; +} USBPD_SNKFixedSupplyPDO_TypeDef; + +/** + * @brief USB PD Sink Variable Supply Power Data Object Structure definition + * + */ +typedef struct +{ + uint32_t OperationalCurrentIn10mAunits : + 10u; + uint32_t MinVoltageIn50mVunits : + 10u; + uint32_t MaxVoltageIn50mVunits : + 10u; + uint32_t VariableSupply : + 2u; +} USBPD_SNKVariableSupplyPDO_TypeDef; + +/** + * @brief USB PD Sink Battery Supply Power Data Object Structure definition + * + */ +typedef struct +{ + uint32_t OperationalPowerIn250mWunits : + 10u; + uint32_t MinVoltageIn50mVunits : + 10u; + uint32_t MaxVoltageIn50mVunits : + 10u; + uint32_t Battery : + 2u; +} USBPD_SNKBatterySupplyPDO_TypeDef; + +/** + * @brief USB PD Sink Generic Power Data Object Structure definition + * + */ +typedef struct +{ + uint32_t Bits_0_10 : 10u; /*!< Specific Power Capabilities are described by the (A)PDOs in the following sections. */ + uint32_t VoltageIn50mVunits : 10u; /*!< Maximum Voltage in 50mV units valid for all PDO (not APDO) */ + uint32_t Bits_20_29 : 10u; /*!< Specific Power Capabilities are described by the (A)PDOs in the following sections. */ + USBPD_CORE_PDO_Type_TypeDef PowerObject : 2u; /*!< (A) Power Data Object */ +} USBPD_GenericPDO_TypeDef; + +/** + * @brief USB PD Power Data Object Structure definition + * + */ +typedef union +{ + uint32_t d32; + + USBPD_GenericPDO_TypeDef GenericPDO; /*!< Generic Power Data Object Structure */ + + USBPD_SRCFixedSupplyPDO_TypeDef SRCFixedPDO; /*!< Fixed Supply PDO - Source */ + + USBPD_SRCVariableSupplyPDO_TypeDef SRCVariablePDO; /*!< Variable Supply (non-Battery) PDO - Source */ + + USBPD_SRCBatterySupplyPDO_TypeDef SRCBatteryPDO; /*!< Battery Supply PDO - Source */ + + USBPD_SNKFixedSupplyPDO_TypeDef SNKFixedPDO; /*!< Fixed Supply PDO - Sink */ + + USBPD_SNKVariableSupplyPDO_TypeDef SNKVariablePDO; /*!< Variable Supply (non-Battery) PDO - Sink */ + + USBPD_SNKBatterySupplyPDO_TypeDef SNKBatteryPDO; /*!< Battery Supply PDO - Sink */ + +#if defined(USBPD_REV30_SUPPORT) +#ifdef USBPDCORE_PPS + USBPD_ProgrammablePowerSupplyAPDO_TypeDef SRCSNKAPDO;/*!< Programmable Power Supply APDO - Source / Sink */ +#endif /* USBPDCORE_PPS */ +#endif /* USBPD_REV30_SUPPORT */ + +} USBPD_PDO_TypeDef; + +/** + * @brief USB PD Sink Fixed and Variable Request Data Object Structure definition + * + */ +typedef struct +{ + uint32_t MaxOperatingCurrent10mAunits : /*!< Corresponding to min if GiveBackFlag = 1 */ + 10u; + uint32_t OperatingCurrentIn10mAunits : + 10u; +#if defined(USBPD_REV30_SUPPORT) + uint32_t Reserved20_22 : + 3u; + uint32_t UnchunkedExtendedMessage : + 1u; +#else + uint32_t Reserved20_23 : + 4u; +#endif /* USBPD_REV30_SUPPORT */ + uint32_t NoUSBSuspend : + 1u; + uint32_t USBCommunicationsCapable : + 1u; + uint32_t CapabilityMismatch : + 1u; + uint32_t GiveBackFlag : + 1u; + uint32_t ObjectPosition : + 3u; + uint32_t Reserved31 : + 1u; +} USBPD_SNKFixedVariableRDO_TypeDef; + +/** + * @brief USB PD Sink Battery Request Data Object Structure definition + * + */ +typedef struct +{ + uint32_t MaxOperatingPowerIn250mWunits : + 10u; + uint32_t OperatingPowerIn250mWunits : + 10u; +#if defined(USBPD_REV30_SUPPORT) + uint32_t Reserved20_22 : + 3u; + uint32_t UnchunkedExtendedMessage : + 1u; /*!< Unchunked Extended Messages Supported */ +#else + uint32_t Reserved20_23 : + 4u; +#endif /* USBPD_REV30_SUPPORT */ + uint32_t NoUSBSuspend : + 1u; + uint32_t USBCommunicationsCapable : + 1u; + uint32_t CapabilityMismatch : + 1u; + uint32_t GiveBackFlag : + 1u; + uint32_t ObjectPosition : + 3u; + uint32_t Reserved31 : + 1u; +} USBPD_SNKBatteryRDO_TypeDef; + +#if defined(USBPD_REV30_SUPPORT) +/** + * @brief USB PD Sink Programmable Request Data Object Structure definition + * + */ +typedef struct +{ + uint32_t OperatingCurrentIn50mAunits : 7u; /*!< Operating Current 50mA units */ + uint32_t Reserved1 : 2u; /*!< Reserved - Shall be set to zero */ + uint32_t OutputVoltageIn20mV : 11; /*!< Output Voltage in 20mV units */ + uint32_t Reserved2 : 3u; /*!< Reserved - Shall be set to zero */ + uint32_t UnchunkedExtendedMessage : 1u; /*!< Unchunked Extended Messages Supported */ + uint32_t NoUSBSuspend : 1u; /*!< No USB Suspend */ + uint32_t USBCommunicationsCapable : 1u; /*!< USB Communications Capable */ + uint32_t CapabilityMismatch : 1u; /*!< Capability Mismatch */ + uint32_t Reserved3 : 1u; /*!< Reserved - Shall be set to zero */ + uint32_t ObjectPosition : 3u; /*!< Object position (000b is Reserved and Shall Not be used) */ + uint32_t Reserved4 : 1u; /*!< USB Communications Capable */ +} USBPD_SNKProgrammableRDO_TypeDef; +#endif /* USBPD_REV30_SUPPORT */ + + +/** + * @brief USB PD Sink Generic Request Data Object Structure definition + * + */ +typedef struct +{ +#if defined(USBPD_REV30_SUPPORT) + uint32_t Bits_0_22 : 23; /*!< Bits 0 to 22 of RDO */ + uint32_t UnchunkedExtendedMessage : 1u; /*!< Unchunked Extended Messages Supported */ +#else + uint32_t Bits_0_23 : 24u; /*!< Bits 0 to 23 of RDO */ +#endif /* USBPD_REV30_SUPPORT */ + uint32_t NoUSBSuspend : 1u; /*!< No USB Suspend */ + uint32_t USBCommunicationsCapable : 1u; /*!< USB Communications Capable */ + uint32_t CapabilityMismatch : 1u; /*!< Capability Mismatch */ + uint32_t Bit_27 : 1u; /*!< Reserved - Shall be set to zero */ + uint32_t ObjectPosition : 3u; /*!< Object position (000b is Reserved and Shall Not be used) */ + uint32_t Bit_31 : 1u; /*!< USB Communications Capable */ +} USBPD_SNKGenericRDO_TypeDef; + +/** + * @brief USB PD Sink Request Data Object Structure definition + * + */ +typedef union +{ + uint32_t d32; + + USBPD_SNKGenericRDO_TypeDef GenericRDO; /*!< Generic Request Data Object Structure */ + + USBPD_SNKFixedVariableRDO_TypeDef FixedVariableRDO; /*!< Fixed and Variable Request Data Object Structure */ + + USBPD_SNKBatteryRDO_TypeDef BatteryRDO; /*!< Battery Request Data Object Structure */ + +#if defined(USBPD_REV30_SUPPORT) + USBPD_SNKProgrammableRDO_TypeDef ProgRDO; /*!< Programmable Request Data Object Structure */ +#endif /* USBPD_REV30_SUPPORT */ + +} USBPD_SNKRDO_TypeDef; + +#if defined(USBPD_REV30_SUPPORT) && defined(USBPDCORE_PPS) +/** + * @brief USBPD Port APDO Structure definition + * + */ +typedef struct +{ + uint32_t *ListOfAPDO; /*!< Pointer on Augmented Power Data Objects list, defining + port capabilities */ + uint8_t NumberOfAPDO; /*!< Number of Augmented Power Data Objects defined in ListOfAPDO + This parameter must be set at max to @ref USBPD_MAX_NB_PDO value */ +} USBPD_PortAPDO_TypeDef; +#endif /* USBPD_REV30_SUPPORT && USBPDCORE_PPS */ + +/** + * @brief USB PD BIST Data Object Structure definition + * + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t BistErrorCounter : + 16u; + uint32_t Reserved16_27 : + 12u; + uint32_t BistMode : + 4u; + } + b; +} USBPD_BISTDataObject_TypeDef; + +/** @brief Sink requested power profile Structure definition + * + */ +typedef struct +{ + uint32_t MaxOperatingCurrentInmAunits; /*!< Sink board Max operating current in mA units */ + uint32_t OperatingVoltageInmVunits; /*!< Sink board operating voltage in mV units */ + uint32_t MaxOperatingVoltageInmVunits; /*!< Sink board Max operating voltage in mV units */ + uint32_t MinOperatingVoltageInmVunits; /*!< Sink board Min operating voltage in mV units */ + uint32_t OperatingPowerInmWunits; /*!< Sink board operating power in mW units */ + uint32_t MaxOperatingPowerInmWunits; /*!< Sink board Max operating power in mW units */ +} USBPD_SNKPowerRequest_TypeDef; + + +/** @defgroup USBPD_CORE_VDM_Exported_Structures USBPD CORE VDM Exported Structures + * @{ + */ + +/** @defgroup USBPD_ProductVdo_TypeDef USB PD VDM Product VDO + * @brief USB PD Product VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t bcdDevice : /*!< Device version */ + 16u; + uint32_t USBProductId : /*!< USB Product ID */ + 16u; + } + b; +} USBPD_ProductVdo_TypeDef; + +/** + * @} + */ + +/** @defgroup USBPD_IDHeaderVDOStructure_definition USB SVDM ID header VDO Structure definition + * @brief USB SVDM ID header VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t VID : 16u; /*!< SVDM Header's SVDM Version */ + uint32_t Reserved : 10u; /*!< Reserved */ + USBPD_ModalOp_TypeDef ModalOperation : 1u; /*!< Modal Operation Supported based on @ref USBPD_ModalOp_TypeDef */ + USBPD_ProductType_TypeDef ProductTypeUFPorCP : 3u; /*!< Product Type (UFP or Cable Plug)based on @ref USBPD_ProductType_TypeDef */ + USBPD_USBCapa_TypeDef USBDevCapability : 1u; /*!< USB Communications Capable as a USB Device based on @ref USBPD_USBCapa_TypeDef */ + USBPD_USBCapa_TypeDef USBHostCapability : 1u; /*!< USB Communications Capable as USB Host based on @ref USBPD_USBCapa_TypeDef */ + } b20; +#if defined(USBPD_REV30_SUPPORT) + struct + { + uint32_t VID : 16u; /*!< SVDM Header's SVDM Version */ + uint32_t Reserved : 5u; /*!< Reserved */ + uint32_t ConnectorType : 2u; /*!< Connector Type based on @ref USBPD_ConnectorType_TypeDef */ + uint32_t ProductTypeDFP : 3u; /*!< Product Type (DFP) based on @ref USBPD_ProductType_TypeDef */ + USBPD_ModalOp_TypeDef ModalOperation : 1u; /*!< Modal Operation Supported based on @ref USBPD_ModalOp_TypeDef */ + USBPD_ProductType_TypeDef ProductTypeUFPorCP : 3u; /*!< Product Type (UFP or Cable Plug)based on @ref USBPD_ProductType_TypeDef */ + USBPD_USBCapa_TypeDef USBDevCapability : 1u; /*!< USB Communications Capable as a USB Device based on @ref USBPD_USBCapa_TypeDef */ + USBPD_USBCapa_TypeDef USBHostCapability : 1u; /*!< USB Communications Capable as USB Host based on @ref USBPD_USBCapa_TypeDef */ + } b30; +#endif /* USBPD_REV30_SUPPORT */ +} USBPD_IDHeaderVDO_TypeDef; +/** + * @} + */ + +typedef union +{ + struct /* PD 2.0*/ + { + USBPD_SsDirectionality SSRX2_DirSupport : 1u; /*!< SSRX2 Directionality Support (PD2.0) */ + USBPD_SsDirectionality SSRX1_DirSupport : 1u; /*!< SSRX1 Directionality Support (PD2.0) */ + USBPD_SsDirectionality SSTX2_DirSupport : 1u; /*!< SSTX2 Directionality Support (PD2.0) */ + USBPD_SsDirectionality SSTX1_DirSupport : 1u; /*!< SSTX1 Directionality Support (PD2.0) */ + } + pd_v20; +#if defined(USBPD_REV30_SUPPORT) + struct /* PD 3.0*/ + { + uint8_t Reserved : 2u; /*!< Reserved */ + USBPD_VBUSMaxVoltage MaxVBUS_Voltage : 2u; /*!< Maximum Cable VBUS Voltage */ + } + pd_v30; +#endif /* USBPD_REV30_SUPPORT */ +} USBPD_CableVdo_Field1TypeDef; + +/** @defgroup USBPD_AttentionInfo_TypeDef USB PD Attention Info object Structure definition + * @brief USB PD Attention Info object Structure definition + * @{ + */ +typedef struct +{ + uint32_t VDO; + uint16_t SVID; + USBPD_VDM_Command_Typedef Command; + uint8_t ModeIndex; +} USBPD_AttentionInfo_TypeDef; + +/** + * @} + */ + +typedef union +{ + struct /* PD 2.0*/ + { + uint8_t Reserved : 4u; /*!< Reserved */ + } + pd_v20; +#if defined(USBPD_REV30_SUPPORT) + struct /* PD 3.0*/ + { + uint8_t VDOVersion : 3u; /*!< Version Number of the VDO */ + uint8_t Reserved : 1u; /*!< Reserved */ + } + pd_v30; +#endif /* USBPD_REV30_SUPPORT */ +} USBPD_CableVdo_Field2TypeDef; + +#define VDM_UNSTRUCTUREDVDM_TYPE 0x0u +#define VDM_STRUCTUREDVDM_TYPE 0x1u + +typedef uint32_t USBPD_VDM_VDMType_Typedef; + +/** @defgroup USBPD_SVDMHeaderStructure_definition USB SVDM Message header Structure definition + * @brief USB SVDM Message header Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + USBPD_VDM_Command_Typedef Command : /*!< SVDM Header's Command */ + 5u; + uint32_t Reserved5 : /*!< Reserved */ + 1u; + USBPD_VDM_CommandType_Typedef CommandType : /*!< SVDM Header's Command Type */ + 2u; + uint32_t ObjectPosition : /*!< SVDM Header's Object Position */ + 3u; + uint32_t Reserved11 : /*!< Reserved */ + 2u; + uint32_t SVDMVersion : /*!< SVDM Header's SVDM Version */ + 2u; + USBPD_VDM_VDMType_Typedef VDMType : /*!< SVDM Header's VDM Type */ + 1u; + uint32_t SVID : /*!< SVDM Header's SVID */ + 16u; + } + b; +} USBPD_SVDMHeader_TypeDef; + +/** + * @} + */ + +#ifdef USBPDCORE_UVDM +/** @defgroup USBPD_UVDMHeaderStructure_definition USB UVDM Message header Structure definition + * @brief USB UVDM Message header Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t VendorUse : 15u; /*!< Content of this field is defined by the vendor. */ + USBPD_VDM_VDMType_Typedef VDMType : 1u; /*!< VDM Type */ + uint32_t VID : 16u; /*!< Vendor ID (VID) */ + } + b; +} USBPD_UVDMHeader_TypeDef; + +/** + * @} + */ +#endif /* USBPDCORE_UVDM */ + +/** @defgroup USBPD_CableVdo_TypeDef USB PD VDM Passive Cable VDO + * @brief USB PD Passive Cable VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + USBPD_UsbSsSupport USB_SS_Support : 3u; /*!< USB SuperSpeed Signaling Support */ + uint32_t reserved : 2u; + USBPD_VBUSCurrentHandCap VBUS_CurrentHandCap : 2u; /*!< VBUS Current Handling Capability */ + uint32_t Fields1 : 2u; /*!< Based on @ref USBPD_CableVdo_Field1TypeDef */ + USBPD_CableMaxVoltage CableMaxVoltage : 2u; /*!< Cable maximun voltage */ + USBPD_CableTermType CableTermType : 2u; /*!< Cable Termination Type */ + uint32_t CableLatency : 4u; /*!< Cable Latency */ + uint32_t Reserved : 1u; /*!< Reserved */ + USBPD_CableToType CableToType : 2u; /*!< USB Type-C plug to USB Type-A/B/C/Captive (PD 2.0) + USB Type-C plug to USB Type-C/Captive (PD 3.0) */ + uint32_t Fields2 : 1u; /*!< Based on @ref USBPD_CableVdo_Field2TypeDef */ + USBPD_VDM_VDO_PassiveCable_Version_TypeDef VDO_Version : 3u; /*!< Version number of the VDO */ + uint32_t CableFWVersion : 4u; /*!< Cable FW version number (vendor defined) */ + uint32_t CableHWVersion : 4u; /*!< Cable HW version number (vendor defined) */ + } + b; +} USBPD_CableVdo_TypeDef; + +#if defined(USBPD_REV30_SUPPORT) +/** @defgroup USBPD_ActiveCableVdo1_TypeDef USB PD VDM Active Cable VDO + * @brief USB PD Active Cable VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + USBPD_UsbSsSupport USB_HighestSpeed : 3u; /*!< USB Highest Speed Support */ + uint32_t SOPSecondControllerPresent : 1u; /*!< SOP'' controller present Support */ + uint32_t VBUS_ThroughCable : 1u; /*!< VBUS Through Cable Support */ + USBPD_VBUSCurrentHandCap VBUS_CurrentHandCap : 2u; /*!< VBUS Current Handling Capability */ + USBPD_ActiveCableSBUType SBUType : 1u; /*!< SBU Type */ + USBPD_ActiveCableSBUSupported SBUSupported : 1u; /*!< SBUs connections supported */ + USBPD_CableMaxVoltage CableMaxVoltage : 2u; /*!< Cable maximun voltage */ + USBPD_CableTermType CableTermType : 2u; /*!< Cable Termination Type (@ref CABLE_TERM_ONE_EACH_VCONN or @ref CABLE_TERM_BOTH_ACTIVE_VCONN */ + uint32_t CableLatency : 4u; /*!< Cable Latency */ + uint32_t : 1u; /*!< B17 Reserved bit */ + USBPD_CableToType ConnectorType : 2u; /*!< Connector Type (@ref CABLE_TO_TYPE_C or @ref CABLE_CAPTIVE) */ + uint32_t : 1u; /*!< B20 Reserved bit */ + USBPD_VDM_VDO_ActiveCable_Version_TypeDef VDO_Version : 3u; /*!< Version number of the Active Cable VDO */ + uint32_t CableFWVersion : 4u; /*!< Cable FW version number (vendor defined) */ + uint32_t CableHWVersion : 4u; /*!< Cable HW version number (vendor defined) */ + } + b; +} USBPD_ActiveCableVdo1_TypeDef; + +/** + * @} + */ +#endif /* USBPD_REV30_SUPPORT */ + +/** @defgroup USBPD_CertStatVdo_TypeDef USB PD VDM Cert stat VDO + * @brief USB PD Cert stat VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t XID : /*!< USB-IF assigned XID */ + 32; + } + b; +} USBPD_CertStatVdo_TypeDef; + +/** + * @} + */ + +/** @defgroup USBPD_AMAVdo_TypeDef USB PD VDM Alternate Mode Adapter VDO + * @brief USB PD Alternate Mode Adapter VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t AMA_USB_SS_Support : 3u; /*!< AMA USB SuperSpeed Signaling Support based on + @ref USBPD_AmaUsbSsSupport */ + uint32_t VBUSRequirement : 1u; /*!< VBUS required based on + @ref USBPD_VBusRequirement */ + uint32_t VCONNRequirement : 1u; /*!< VCONN required based on + @ref USBPD_VConnRequirement */ + uint32_t VCONNPower : 3u; /*!< VCONN power based on + @ref USBPD_VConnPower */ +#if defined(USBPD_REV30_SUPPORT) + uint32_t Reserved : 13; /*!< Reserved */ + uint32_t VDO_Version : 3u; /*!< Version Number of the VDO */ +#else + uint32_t SSRX2_DirSupport : 1u; /*!< SSRX2 Directionality Support (PD2.0) based on + @ref USBPD_SsDirectionality */ + uint32_t SSRX1_DirSupport : 1u; /*!< SSRX1 Directionality Support (PD2.0) based on + @ref USBPD_SsDirectionality */ + uint32_t SSTX2_DirSupport : 1u; /*!< SSTX2 Directionality Support (PD2.0) based on + @ref USBPD_SsDirectionality */ + uint32_t SSTX1_DirSupport : 1u; /*!< SSTX1 Directionality Support (PD2.0) based on + @ref USBPD_SsDirectionality */ + uint32_t Reserved : 12u; /*!< Reserved */ +#endif /* USBPD_REV30_SUPPORT */ + uint32_t AMAFWVersion : 4u; /*!< AMA FW version number (vendor defined) */ + uint32_t AMAHWVersion : 4u; /*!< AMA HW version number (vendor defined) */ + } + b; +} USBPD_AMAVdo_TypeDef; +/** + * @} + */ + +#if defined(USBPD_REV30_SUPPORT) +/** @defgroup USBPD_UFPVdo1_TypeDef USB PD VDM UFP1 VDO + * @brief USB PD UFP1 VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + USBPD_UsbSsSupport USB_HighestSpeed : 3u; /*!< USB Highest Speed Support */ + USBPD_VDO_UFP_AlternateModes AlternateModes : 3u; /*!< Alternate Modes based */ + uint32_t : 16u; /*!< B21…6 Reserved bit */ + USBPD_ConnectorType_TypeDef ConnectorType : 2u; /*!< Connector Type */ + USBPD_VDO_UFP_DeviceCapability DeviceCapability : 4u; /*!< Device Capability */ + uint32_t : 1u; /*!< B28 Reserved bit */ + USBPD_VDM_VDO_UFP_Version_TypeDef UFPVDOVersion : 3u; /*!< Version Number of the VDO (should be set to Version1.1) */ + } + b; +} USBPD_UFPVdo1_TypeDef; +/** + * @} + */ + +/** @defgroup USBPD_UFPVdo2_TypeDef USB PD VDM UFP2 VDO + * @brief USB PD UFP2 VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t USB3_MaxPower : 7u; /*!< Power in watts required for full functionality excluding any power required for battery charging or for redistribution in [USB 3.2] operation. */ + uint32_t USB3_MinPower : 7u; /*!< Minimum power in watts required to function in [USB 3.2] operation. */ + uint32_t : 2u; /*!< B15…14 Reserved bit */ + uint32_t USB4_MaxPower : 7u; /*!< Power in watts required for full functionality excluding any power required for battery charging or for redistribution in [USB4] operation */ + uint32_t USB4_MinPower : 7u; /*!< Minimum power in watts required to function in [USB4] operation. */ + uint32_t : 2u; /*!< B31…30 Reserved bit */ + } + b; +} USBPD_UFPVdo2_TypeDef; + +/** @defgroup USBPD_DFPVdo_TypeDef USB PD VDM DFP VDO + * @brief USB PD DFP VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t PortNumber : 5u; /*!< Unique port number to identify a specific port on a multi-port device */ + uint32_t : 17u; /*!< B21…5 Reserved bits */ + USBPD_ConnectorType_TypeDef ConnectorType : 2u; /*!< Connector Type */ + USBPD_VDO_DFP_HostCapability HostCapability : 3u; /*!< Host Capability */ + uint32_t : 2u; /*!< B28…27 Reserved bits */ + USBPD_VDM_VDO_DFP_Version_TypeDef DFPVDOVersion : 3u; /*!< Version Number of the VDO (should be set to Version1.1) */ + } + b; +} USBPD_DFPVdo_TypeDef; +/** + * @} + */ + +#if defined(USBPDCORE_VPD) +/** @defgroup USBPD_VPDVdo_TypeDef USB PD VDM Vconn Powered USB Device VDO + * @brief USB PD Vconn Powered USB Device VDO Structure definition + * @{ + */ +typedef union +{ + uint32_t d32; + struct + { + USBPD_VDO_VPD_ChargeSupport ChargeThroughSupport : 1u; /*!< Charge Through Support */ + uint32_t GroundImpedance : 6u; /*!< Charge Through Support bit = 1b: Ground impedance through the VPD in 1 mOhm increments. + Values less than 10 mOhm are Reserved and Shall Not be used. + Charge Through Support bit = 0b: Reserved, Shall be set to zero */ + uint32_t VBUS_Impedance : 6u; /*!< Charge Through Support bit = 1b: Vbus impedance through the VPD in 2 mOhm increments. + Values less than 10 mOhm are Reserved and Shall Not be used. + Charge Through Support bit = 0b: Reserved, Shall be set to zero */ + uint32_t : 2u; /*!< B14…13 Reserved bit */ + USBPD_VDO_VPD_ChargeCurrent ChargeThroughCurrent : 1u; /*!< Charge Through Current Support */ + USBPD_CableMaxVoltage CableMaxVoltage : 2u; /*!< Cable maximun voltage */ + uint32_t : 4u; /*!< B20…17 Reserved bit */ + USBPD_VDM_VDO_VPD_Version_TypeDef VDO_Version : 3u; /*!< Version number of the VPD VDO */ + uint32_t FWVersion : 4u; /*!< Cable FW version number (vendor defined) */ + uint32_t HWVersion : 4u; /*!< Cable HW version number (vendor defined) */ + } + b; +} USBPD_VPDVdo_TypeDef; +/** + * @} + */ +#endif /* USBPDCORE_VPD */ +#endif /* USBPD_REV30_SUPPORT */ + +/** @defgroup USBPD_DiscoveryIdentity_TypeDef USB PD Discovery identity Structure definition + * @brief Data received from Discover Identity messages + * @{ + */ +typedef struct +{ + + USBPD_IDHeaderVDO_TypeDef IDHeader; /*!< ID Header VDO */ + USBPD_CertStatVdo_TypeDef CertStatVDO; /*!< Cert Stat VDO */ + USBPD_ProductVdo_TypeDef ProductVDO; /*!< Product VDO */ +#if defined(USBPDCORE_VCONN_SUPPORT) + USBPD_CableVdo_TypeDef CableVDO; /*!< Passive Cable VDO */ +#endif /* USBPDCORE_VCONN_SUPPORT */ + USBPD_AMAVdo_TypeDef AMA_VDO; /*!< Alternate Mode Adapter VDO */ +#if defined(USBPD_REV30_SUPPORT) +#if defined(USBPDCORE_VCONN_SUPPORT) + USBPD_ActiveCableVdo1_TypeDef ActiveCableVDO1; /*!< Active Cable VDO 1 */ +#endif /* USBPDCORE_VCONN_SUPPORT */ + USBPD_UFPVdo1_TypeDef UFP_VDO1; /*!< UFP VDO 1 */ + USBPD_UFPVdo2_TypeDef UFP_VDO2; /*!< UFP VDO 2 */ + USBPD_DFPVdo_TypeDef DFP_VDO; /*!< DFP VDO */ +#if defined(USBPDCORE_VPD) + USBPD_VPDVdo_TypeDef VPD_VDO; /*!< VPD VDO */ +#endif /* USBPDCORE_VPD */ +#endif /* USBPD_REV30_SUPPORT */ +#if defined(USBPDCORE_VCONN_SUPPORT) + uint8_t CableVDO_Presence : 1U; /*!< Indicate Passive Cable VDO presence or not */ +#endif /* USBPDCORE_VCONN_SUPPORT */ + uint8_t AMA_VDO_Presence : 1U; /*!< Indicate Alternate Mode Adapter VDO presence or not */ +#if defined(USBPD_REV30_SUPPORT) +#if defined(USBPDCORE_VCONN_SUPPORT) + uint8_t ActiveCableVDO1_Presence: 1U; /*!< indicate active cable vdo 1 presence or not */ +#endif /* USBPDCORE_VCONN_SUPPORT */ + uint8_t UFP_VDO_Presence : 1U; /*!< Indicate UFP VDO presence or not */ + uint8_t DFP_VDO_Presence : 1U; /*!< Indicate DFP VDO presence or not */ +#if defined(USBPDCORE_VPD) + uint8_t VPD_VDO_Presence : 1U; /*!< Indicate VPD VDO presence or not */ +#if defined(USBPDCORE_VCONN_SUPPORT) + uint8_t Reserved : 2U; /*!< Reserved bits */ +#else + uint8_t Reserved : 3U; /*!< Reserved bits */ +#endif /* USBPDCORE_VCONN_SUPPORT */ +#else +#if defined(USBPDCORE_VCONN_SUPPORT) + uint8_t Reserved : 3U; /*!< Reserved bits */ +#else + uint8_t Reserved : 4U; /*!< Reserved bits */ +#endif /* USBPDCORE_VCONN_SUPPORT */ +#endif /* USBPDCORE_VPD */ +#else +#if defined(USBPDCORE_VCONN_SUPPORT) + uint8_t Reserved : 6U; /*!< Reserved bits */ +#else + uint8_t Reserved : 7U; /*!< Reserved bits */ +#endif /* USBPDCORE_VCONN_SUPPORT */ +#endif /* USBPD_REV30_SUPPORT */ +} USBPD_DiscoveryIdentity_TypeDef; +/** + * @} + */ + +/** @defgroup USBPD_ModeInfo_TypeDef USB PD Mode Info object Structure definition + * @brief USB PD Mode Info object Structure definition + * @{ + */ +typedef struct +{ + uint32_t NumModes; + uint32_t Modes[MAX_MODES_PER_SVID]; + uint16_t SVID; +} USBPD_ModeInfo_TypeDef; + +/** + * @} + */ + +/** @defgroup USBPD_SVID_TypeDef USB PD Discovery SVID Structure definition + * @brief Data received from Discover Identity messages + * @{ + */ +/* + * Structure to SVID supported by the devices + */ +typedef struct +{ + uint16_t SVIDs[12u]; + uint8_t NumSVIDs; + uint8_t AllSVID_Received; /*!< Flag to indicate that all the SVIDs have been received. + No need to send new SVDM Discovery SVID message */ +} USBPD_SVIDInfo_TypeDef; +/** + * @} + */ + +#if defined(USBPD_REV30_SUPPORT) +/** + * @brief USBPD Alert Data Object Structure definition + * + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t Reserved : 16u; /*!< Reserved */ + uint32_t HotSwappableBatteries: 4u; /*!< Hot Swappable Batteries is a combination of @ref USBPD_ADO_HOT_SWAP_BATT */ + uint32_t FixedBatteries : 4u; /*!< Fixed Batteries is a combination of @ref USBPD_ADO_FIXED_BATT */ + uint32_t TypeAlert : 8u; /*!< Type of Alert is a combination of @ref USBPD_ADO_TYPE_ALERT */ + } + b; +} USBPD_ADO_TypeDef; + +/** + * @brief USBPD Battery Status Data Object Structure definition + * + */ +typedef union +{ + uint32_t d32; + struct + { + uint32_t Reserved: 8u; + uint32_t BatteryInfo: 8u; /*!< Based on @ref USBPD_BSDO_BATT_INFO */ + uint32_t BatteryPC: 16u; + } + b; +} USBPD_BSDO_TypeDef; + +/** + * @brief USBPD Source Capabilities Extended Message Structure definition + * + */ +typedef struct USBPD_SCEDB_TypeDef +{ + uint16_t VID; /*!< Vendor ID (assigned by the USB-IF) */ + uint16_t PID; /*!< Product ID (assigned by the manufacturer) */ + uint32_t XID; /*!< Value provided by the USB-IF assigned to the product */ + uint8_t FW_revision; /*!< Firmware version number */ + uint8_t HW_revision; /*!< Hardware version number */ + uint8_t Voltage_regulation; /*!< Voltage Regulation */ + uint8_t Holdup_time; /*!< Holdup Time */ + uint8_t Compliance; /*!< Compliance */ + uint8_t TouchCurrent; /*!< Touch Current */ + uint16_t PeakCurrent1; /*!< Peak Current1 */ + uint16_t PeakCurrent2; /*!< Peak Current2 */ + uint16_t PeakCurrent3; /*!< Peak Current3 */ + uint8_t Touchtemp; /*!< Touch Temp */ + uint8_t Source_inputs; /*!< Source Inputs */ + uint8_t NbBatteries; /*!< Number of Batteries/Battery Slots */ + uint8_t SourcePDP; /*!< Source PDP */ +} USBPD_SCEDB_TypeDef; + +#if defined(USBPDCORE_SNK_CAPA_EXT) +/** + * @brief SKEDB - Sink Load Characteristics structure definition + * + */ +typedef union +{ + uint16_t Value; + struct + { + uint16_t PercentOverload : 5u; /*!< Percent overload in 10% increments Values higher than 25 (11001b) are clipped to 250%. + 00000b is the default. */ + uint16_t OverloadPeriod : 6u; /*!< Overload period in 20ms when bits 0-4 non-zero. */ + uint16_t DutyCycle : 4u; /*!< Duty cycle in 5% increments when bits 0-4 are non-zero. */ + uint16_t VBusVoltageDrop : 1u; /*!< Can tolerate VBUS Voltage drop. */ + } b; +} USBPD_SKEDB_SinkLoadCharac_TypeDef; +/** + * @brief USBPD Sink Capabilities Extended Message Structure definition + * + */ +typedef struct USBPD_SKEDB_TypeDef +{ + uint16_t VID; /*!< Vendor ID (assigned by the USB-IF) */ + uint16_t PID; /*!< Product ID (assigned by the manufacturer) */ + uint32_t XID; /*!< Value provided by the USB-IF assigned to the product */ + uint8_t FW_revision; /*!< Firmware version number */ + uint8_t HW_revision; /*!< Hardware version number */ + uint8_t SKEDB_Version; /*!< SKEDB Version (not the specification Version) based on + @ref USBPD_SKEDB_VERSION */ + uint8_t LoadStep; /*!< Load Step based on @ref USBPD_SKEDB_LOADSTEP */ + USBPD_SKEDB_SinkLoadCharac_TypeDef SinkLoadCharac; /*!< Sink Load Characteristics */ + uint8_t Compliance; /*!< Compliance based on combination of @ref USBPD_SKEDB_COMPLIANCE */ + uint8_t Touchtemp; /*!< Touch Temp based on @ref USBPD_SKEDB_TOUCHTEMP */ + uint8_t BatteryInfo; /*!< Battery info */ + uint8_t SinkModes; /*!< Sink Modes based on combination of @ref USBPD_SKEDB_SINKMODES */ + uint8_t SinkMinimumPDP; /*!< The Minimum PDP required by the Sink to operate without + consuming any power from its Battery(s) should it have one */ + uint8_t SinkOperationalPDP; /*!< The PDP the Sink requires to operate normally. For Sinks with + a Battery, it is the PDP Rating of the charger supplied with + it or recommended for it. */ + uint8_t SinkMaximumPDP; /*!< The Maximum PDP the Sink can consume to operate and + charge its Battery(s) should it have one. */ +} USBPD_SKEDB_TypeDef; +#endif /* USBPDCORE_SNK_CAPA_EXT */ + +/** + * @brief USBPD Source Status Extended Message Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint8_t InternalTemp; /*!< Source or Sink internal temperature in degrees centigrade */ + uint8_t PresentInput; /*!< Present Input */ + uint8_t PresentBatteryInput; /*!< Present Battery Input */ + uint8_t EventFlags; /*!< Event Flags */ + uint8_t TemperatureStatus; /*!< Temperature */ + uint8_t PowerStatus; /*!< Power Status based on combination of @ref USBPD_SDB_POWER_STATUS */ +} USBPD_SDB_TypeDef; + +/** + * @brief USBPD Get Battery Capabilities Data Block Extended Message Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint8_t BatteryCapRef; /*!< Number of the Battery indexed from zero */ +} USBPD_GBCDB_TypeDef; + +/** + * @brief USBPD Get Battery Status Data Block Extended Message Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint8_t BatteryStatusRef; /*!< Number of the Battery indexed from zero */ +} USBPD_GBSDB_TypeDef; + +/** + * @brief USBPD Battery Capability Data Block Extended Message Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint16_t VID; /*!< Vendor ID (assigned by the USB-IF) */ + uint16_t PID; /*!< Product ID (assigned by the manufacturer) */ + uint16_t BatteryDesignCapa; /*!< Battery Design Capacity */ + uint16_t BatteryLastFullChargeCapa; /*!< Battery last full charge capacity */ + uint8_t BatteryType; /*!< Battery Type */ +} USBPD_BCDB_TypeDef; + +/** + * @brief USBPD Get Manufacturer Info Info Data Block Extended Message Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint8_t ManufacturerInfoTarget; /*!< Manufacturer Info Target based on @ref USBPD_MANUFINFO_TARGET */ + uint8_t ManufacturerInfoRef; /*!< Manufacturer Info Ref between Min_Data=0 and Max_Data=7 (@ref USBPD_MANUFINFO_REF) */ +} USBPD_GMIDB_TypeDef; + +/** + * @brief USBPD Manufacturer Info Data Block Extended Message Structure definition + * + */ +typedef struct +{ + uint16_t VID; /*!< Vendor ID (assigned by the USB-IF) */ + uint16_t PID; /*!< Product ID (assigned by the manufacturer) */ + uint8_t ManuString[22]; /*!< Vendor defined byte array */ +} USBPD_MIDB_TypeDef; + +#if defined(USBPDCORE_FWUPD) +/** + * @brief USBPD Firmware Update GET_FW_ID Response Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + USBPD_FWUPD_Status_TypeDef Status; /*!< Status Information during Firmware Update */ + uint16_t VID; /*!< USB-IF assigned Vendor ID */ + uint16_t PID; /*!< USB-IF assigned Product ID */ + uint8_t HWVersion; /*!< Hardware Version */ + uint8_t SiVersion; /*!< Silicon Version */ + uint16_t FWVersion1; /*!< Most significant component of the firmware version */ + uint16_t FWVersion2; /*!< Second-most significant component of the firmware version */ + uint16_t FWVersion3; /*!< Third-most significant component of the firmware version */ + uint16_t FWVersion4; /*!< Least significant component of the firmware version */ + uint8_t ImageBank; /*!< Image bank for which firmware is requested */ + uint8_t Flags1; /*!< Flags1 */ + uint8_t Flags2; /*!< Flags2 */ + uint8_t Flags3; /*!< Flags3 */ + uint8_t Flags4; /*!< Flags4 */ +} USBPD_FWUPD_GetFwIDRspPayload_TypeDef; + +/** + * @brief USBPD Firmware Update PDFU_INITIATE Request Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint16_t FWVersion1; /*!< Most significant component of the firmware version */ + uint16_t FWVersion2; /*!< Second-most significant component of the firmware version */ + uint16_t FWVersion3; /*!< Third-most significant component of the firmware version */ + uint16_t FWVersion4; /*!< Least significant component of the firmware version */ +} USBPD_FWUPD_PdfuInitReqPayload_TypeDef; + +/** + * @brief USBPD Firmware Update PDFU_INITIATE Response Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + USBPD_FWUPD_Status_TypeDef Status; /*!< Status Information during Firmware Update */ + uint8_t WaitTime; /*!< Wait time */ + uint8_t MaxImageSize[3u]; /*!< Max image size */ +} USBPD_FWUPD_PdfuInitRspPayload_TypeDef; + +/** + * @brief USBPD Firmware Update PDFU_DATA Response Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + USBPD_FWUPD_Status_TypeDef Status; /*!< Status Information during Firmware Update */ + uint8_t WaitTime; /*!< Wait time */ + uint8_t NumDataNR; /*!< Number of PDFU_DATA_NR Requests */ + uint16_t DataBlockNum; /*!< Data Block Number of the next PDFU_DATA or PDFU_DATA_NR */ +} USBPD_FWUPD_PdfuDataRspPayload_TypeDef; + +/** + * @brief USBPD Firmware Update PDFU_VALIDATE Response Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + USBPD_FWUPD_Status_TypeDef Status; /*!< Status Information during Firmware Update */ + uint8_t WaitTime; /*!< Wait time */ + uint8_t Flags; /*!< Flags */ +} USBPD_FWUPD_PdfuValidateRspPayload_TypeDef; + +/** + * @brief USBPD Firmware Update PDFU_DATA_PAUSE Response Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + USBPD_FWUPD_Status_TypeDef Status; /*!< Status Information during Firmware Update */ +} USBPD_FWUPD_PdfuDataPauseRspPayload_TypeDef; + +/** + * @brief USBPD Firmware Update VENDOR_SPECIFIC Request Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint16_t VID; /*!< USB-IF assigned Vendor ID */ + uint8_t VendorDefined[256]; /*!< Vendor defined */ +} USBPD_FWUPD_VendorSpecificReqPayload_TypeDef; + +/** + * @brief USBPD Firmware Update VENDOR_SPECIFIC Response Payload Structure definition + * + */ +typedef __PACKED_STRUCT +{ + USBPD_FWUPD_Status_TypeDef Status; /*!< Status Information during Firmware Update */ + uint16_t VID; /*!< USB-IF assigned Vendor ID */ + uint8_t VendorDefined[255]; /*!< Vendor defined */ +} USBPD_FWUPD_VendorSpecificRspPayload_TypeDef; + +/** + * @brief USBPD Firmware Update Request Data Block Extended Message Structure definition + * + */ +typedef __PACKED_STRUCT +{ + uint8_t ProtocolVersion; /*!< Protocol Version (@ref USBPD_FWUPD_PROT_VER) */ + uint8_t MessageType; /*!< Firmware Update Message type (@ref USBPD_FWUPD_MSGTYPE) */ + uint8_t Payload[258]; /*!< Payload */ +} USBPD_FRQDB_TypeDef; + +#endif /* USBPDCORE_FWUPD */ + +#ifdef USBPDCORE_PPS +/** + * @brief USBPD PPS Status Data Block Extended Message Structure definition + * + */ +typedef union +{ + uint32_t d32; + struct + { + uint16_t OutputVoltageIn20mVunits; /*!< Source output voltage in 20mV units. + When set to 0xFFFF, the Source does not support this field. */ + uint8_t OutputCurrentIn50mAunits; /*!< Source output current in 50mA units. + When set to 0xFF, the Source does not support this field. */ + uint8_t RealTimeFlags; /*!< Real Time Flags, combination of @ref USBPD_CORE_DEF_REAL_TIME_FLAGS */ + } fields; +} USBPD_PPSSDB_TypeDef; +#endif /* USBPDCORE_PPS */ + +/** + * @brief USBPD Country Code Data Block Extended Message Structure definition + * + */ +typedef struct +{ + uint32_t Length; /*!< Number of country codes in the message */ + uint16_t *PtrCountryCode; /*!< Pointer of the country codes (1 to n) */ +} USBPD_CCDB_TypeDef; + +/** + * @brief USBPD Country Info Data Block Extended Message Structure definition + * + */ +typedef struct +{ + uint16_t CountryCode; /*!< 1st and 2nd character of the Alpha-2 Country Code defined by [ISO 3166] */ + uint32_t Reserved; /*!< Reserved - Shall be set to 0. */ + uint8_t PtrCountrySpecificData; /*!< Pointer on Content defined by the country authority (0 t 256 bytes). */ +} USBPD_CIDB_TypeDef; + +#endif /* USBPD_REV30_SUPPORT */ + +/** + * @} + */ + +/** @defgroup USBPD_CORE_SETTINGS_Exported_Structures USBPD CORE Settings Exported Structures + * @brief USBPD Settings Structure definition + * @{ + */ +#if defined(USBPD_REV30_SUPPORT) +typedef union +{ + uint16_t PD3_Support; + struct + { + uint16_t PE_UnchunkSupport : 1u; /*!< Unchunked support */ + uint16_t PE_FastRoleSwapSupport : 1u; /*!< Fast role swap support (not yet implemented) */ + uint16_t Is_GetPPSStatus_Supported : 1u; /*!< Get PPS status message supported by PE */ + uint16_t Is_SrcCapaExt_Supported : 1u; /*!< Source_Capabilities_Extended message supported by PE */ + uint16_t Is_Alert_Supported : 1u; /*!< Alert message supported by PE */ + uint16_t Is_GetStatus_Supported : 1u; /*!< Get_Status message supported by PE (Is_Alert_Supported should be enabled) */ + uint16_t Is_GetManufacturerInfo_Supported : 1u; /*!< Manufacturer_Info message supported by PE */ + uint16_t Is_GetCountryCodes_Supported : 1u; /*!< Get_Country_Codes message supported by PE */ + uint16_t Is_GetCountryInfo_Supported : 1u; /*!< Get_Country_Info message supported by PE */ + uint16_t Is_SecurityRequest_Supported : 1u; /*!< Security_Response message supported by PE */ + uint16_t Is_FirmUpdateRequest_Supported : 1u; /*!< Firmware update response message supported by PE */ + uint16_t Reserved2 : 1u; /*!< Reserved bits: old Is_SnkCapaExt_Supported (SNK_CAPA_EXT msg mandatory) */ + uint16_t Is_GetBattery_Supported : 1u; /*!< Get Battery Capabitity and Status messages supported by PE */ + uint16_t reserved : 3u; /*!< Reserved bits */ + } d; +} USBPD_PD3SupportTypeDef; +#endif /* USBPD_REV30_SUPPORT */ + +typedef struct +{ +#if defined(USBPDCORE_LIB_NO_PD) + USBPD_PortPowerRole_TypeDef PE_DefaultRole: 1u; /*!< Default port role based on @ref USBPD_PortPowerRole_TypeDef */ + CAD_RP_Source_Current_Adv_Typedef CAD_DefaultResistor : 2u; /*!< Default RP resistor based on @ref CAD_RP_Source_Current_Adv_Typedef */ + uint8_t : 5u; /*!< Reserved bits */ +#else + USBPD_SupportedSOP_TypeDef PE_SupportedSOP; /*!< Corresponds to the message managed by the stack and this should be set depending if you want discuss with the cable + So if VconnSupport is enabling this field must be set to + @ref USBPD_SUPPORTED_SOP_SOP | @ref USBPD_SUPPORTED_SOP_SOP1 | @ref USBPD_SUPPORTED_SOP_SOP2 + else + @ref USBPD_SUPPORTED_SOP_SOP + */ + USBPD_SpecRev_TypeDef PE_SpecRevision : 2u; /*!< Spec revision value based on @ref USBPD_SpecRev_TypeDef */ + USBPD_PortPowerRole_TypeDef PE_DefaultRole: 1u; /*!< Default port role based on @ref USBPD_PortPowerRole_TypeDef */ + uint32_t PE_RoleSwap : 1u; /*!< If enabled, allows the port to have DRP behavior */ +#if defined(USBPDCORE_VPD) + uint32_t VPDSupport : 1u; /*!< support of the CTVPD device */ +#else + uint32_t _empty1 : 1u; /*!< Reserved bit */ +#endif /* defined(USBPDCORE_VPD)*/ + uint32_t PE_VDMSupport : 1u; /*!< Support VDM: If not enabled any VDM message received is replied "not supported" */ + uint32_t PE_PingSupport : 1u; /*!< support Ping (only for PD3.0): If enabled allows DPM to send ping message */ + uint32_t PE_CapscounterSupport : 1u; /*!< If enabled after an amount of message source capabilities not replied, the stack stop the message send.*/ + uint32_t PE_RespondsToDiscovSOP : 1u; /*!< Can respond successfully to a Discover Identity */ + uint32_t PE_AttemptsDiscovSOP : 1u; /*!< Can send a Discover Identity */ + uint32_t CAD_TryFeature : 2u; /*!< Not yet implemented */ + uint32_t CAD_AccesorySupport : 1u; /*!< Not yet implemented */ + uint32_t CAD_RoleToggle : 1u; /*!< If enabled allows the detection state machine switch Rp/Rd means toggle the presented role between source and sink */ + CAD_RP_Source_Current_Adv_Typedef CAD_DefaultResistor : 2u; /*!< Default RP resistor based on @ref CAD_RP_Source_Current_Adv_Typedef */ + uint32_t CAD_SNKToggleTime : 8u; /*!< Sink toggle time in ms */ + uint32_t CAD_SRCToggleTime : 8u; /*!< Source toggle time in ms */ +#if defined(USBPD_REV30_SUPPORT) + USBPD_PD3SupportTypeDef PE_PD3_Support; /*!< PD3 structure support flags based on @ref USBPD_PD3SupportTypeDef */ +#else + uint16_t reserved : 16u; /*!< Reserved bits */ +#endif /* USBPD_REV30_SUPPORT */ +#endif /*USBPDCORE_LIB_NO_PD*/ +} USBPD_SettingsTypeDef; + +/** + * @} + */ + +/** @defgroup USBPD_CORE_PARAMS_Exported_Structures USBPD CORE Params Exported Structures + * @brief USBPD Params Structure definition + * @{ + */ +typedef struct +{ + USBPD_SpecRev_TypeDef PE_SpecRevision : 2u; /*!< PE Specification revision */ + USBPD_PortPowerRole_TypeDef PE_PowerRole : 1u; /*!< PE Power role */ + USBPD_PortDataRole_TypeDef PE_DataRole : 1u; /*!< PE Data role */ + uint32_t PE_SwapOngoing : 1u; /*!< Power role swap ongoing flag */ + USBPD_VDMVersion_TypeDef VDM_Version : 1u; /*!< VDM version */ + CCxPin_TypeDef ActiveCCIs : 2u; /*!< Active CC line based on @ref CCxPin_TypeDef */ + USBPD_POWER_StateTypedef PE_Power : 3u; /*!< Power status based on @ref USBPD_POWER_StateTypedef */ + uint32_t DPM_Initialized : 1u; /*!< DPM initialized flag */ + uint32_t PE_IsConnected : 1u; /*!< USB-PD PE stack is connected to CC line */ + CCxPin_TypeDef VconnCCIs : 2u; /*!< VConn CC line based on @ref CCxPin_TypeDef */ + uint32_t VconnStatus : 1u; /*!< VConnStatus USBP_TRUE = vconn on USBPD_FALSE = vconn off */ + CAD_RP_Source_Current_Adv_Typedef RpResistor : 2u; /*!< RpResistor presented */ + CAD_SNK_Source_Current_Adv_Typedef SNKExposedRP_AtAttach : 2u; /*!< Exposed resistance from source at attach */ +#if defined(USBPDCORE_VPD) + uint32_t VPDflag : 1u; /*!< VPD detection flag */ + uint32_t CAD_VPDStatus : 2u; /*!< CAD VPD status used between CAD and PE */ + uint32_t PE_VPDStatus : 2u; /*!< CAD VPD status used between CAD and PE */ +#else + uint32_t Reserved1 : 5u; /*!< Reserved bits */ +#endif /* defined(USBPDCORE_VPD) */ +#if defined(USBPD_REV30_SUPPORT) && defined(USBPDCORE_UNCHUNCKED_MODE) + uint32_t PE_UnchunkSupport: 1u; /*!< Unchunked support */ +#if defined(USBPDCORE_VCONN_SUPPORT) + USBPD_SpecRev_TypeDef CBL_SpecRevision: 2u; /*!< Cable Specification revision */ + uint32_t Reserved : 6u; /*!< Reserved bits */ +#else + uint32_t Reserved : 8u; /*!< Reserved bits */ +#endif /* USBPDCORE_VCONN_SUPPORT */ +#else +#if defined(USBPDCORE_VCONN_SUPPORT) + USBPD_SpecRev_TypeDef CBL_SpecRevision: 2u; /*!< Cable Specification revision */ + uint32_t Reserved : 7u; /*!< Reserved bits */ +#else + uint32_t Reserved : 9u; /*!< Reserved bits */ +#endif /* USBPDCORE_VCONN_SUPPORT */ +#endif /* USBPD_REV30_SUPPORT && USBPDCORE_UNCHUNCKED_MODE */ +} USBPD_ParamsTypeDef; + +/** + * @} + */ + +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_DEF_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_dpm_core.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_dpm_core.h new file mode 100644 index 0000000..fce43e6 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_dpm_core.h @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file usbpd_dpm_core.h + * @author MCD Application Team + * @brief Header file for usbpd_dpm_core.c file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef __USBPD_DPM_CORE_H_ +#define __USBPD_DPM_CORE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported typedef ----------------------------------------------------------*/ +/* USER CODE BEGIN typedef */ + +/* USER CODE END typedef */ + +/* Exported define -----------------------------------------------------------*/ +#ifdef _RTOS +#if defined(USBPD_TCPM_MODULE_ENABLED) +#define TCPM_ALARMBOX_MESSAGES_MAX (3U * USBPD_PORT_COUNT) +#endif /* USBPD_TCPM_MODULE_ENABLED */ +#endif /* _RTOS */ +/* USER CODE BEGIN define */ + +/* USER CODE END define */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN constants */ + +/* USER CODE END constants */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN macro */ + +/* USER CODE END macro */ + +/* Exported variables --------------------------------------------------------*/ +extern USBPD_ParamsTypeDef DPM_Params[USBPD_PORT_COUNT]; +/* USER CODE BEGIN variables */ + +/* USER CODE END variables */ + +/* Exported functions --------------------------------------------------------*/ +USBPD_StatusTypeDef USBPD_DPM_InitCore(void); +USBPD_StatusTypeDef USBPD_DPM_InitOS(void); +void USBPD_DPM_Run(void); +#if !defined(USBPDCORE_LIB_NO_PD) +void USBPD_DPM_TimerCounter(void); +#endif /* USBPDCORE_LIB_NO_PD */ +/* USER CODE BEGIN functions */ + +/* USER CODE END functions */ +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_DPM_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_trace.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_trace.h new file mode 100644 index 0000000..12457de --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/inc/usbpd_trace.h @@ -0,0 +1,135 @@ +/** + ****************************************************************************** + * @file usbpd_trace.h + * @author MCD Application Team + * @brief This file contains the headers of usbpd_cad.h for Cable Attach-Detach + * controls. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +#ifndef __USBPD_TRACE_H_ +#define __USBPD_TRACE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_core.h" +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_CORE + * @{ + */ + +/** @addtogroup USBPD_CORE_TRACE + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported define -----------------------------------------------------------*/ +typedef enum { + TCPM_TRACE_CORE_ALERT, /*!< ALERT_TASK */ + TCPM_TRACE_ALERT, /*!< USBPD_TCPM_alert */ + TCPM_TRACE_ALERT_CLEAR, /*!< USBPD_TCPM_alert: tcpc_clear_alert */ + TCPM_TRACE_ALERT_GET_POWER_STATUS, /*!< USBPD_TCPM_alert: get_power_status */ + TCPM_TRACE_ALERT_GET_FAULT_STATUS, /*!< USBPD_TCPM_alert: get_fault_status */ + TCPM_TRACE_ALERT_SET_FAULT_STATUS, /*!< USBPD_TCPM_alert: set_fault_status */ + TCPM_TRACE_ALERT_READ_ALERT, /*!< USBPD_TCPM_alert: set_fault_status */ + TCPM_TRACE_HW_INIT, /*!< USBPD_TCPM_HWInit */ + TCPM_TRACE_SET_CC, /*!< USBPD_TCPM_set_cc */ + TCPM_TRACE_VBUS_GET_VOLTAGE, /*!< USBPD_TCPM_VBUS_GetVoltage */ + TCPM_TRACE_VBUS_IS_VSAFE0V, /*!< USBPD_TCPM_VBUS_IsVsafe0V */ + TCPM_TRACE_VBUS_IS_VSAFEEV, /*!< USBPD_TCPM_VBUS_IsVsafe5V */ + TCPM_TRACE_VBUS_ENABLE, /*!< USBPD_TCPM_VBUS_Enable */ + TCPM_TRACE_VBUS_DISABLE, /*!< USBPD_TCPM_VBUS_Disable */ + TCPM_TRACE_INIT, /*USBPD_PHY_Init*/ + TCPM_TRACE_DEINIT, /*USBPD_PHY_Deinit*/ + TCPM_TRACE_RESET, /*USBPD_PHY_Reset*/ + TCPM_TRACE_SOP_SUPPORTED, /*USBPD_PHY_SOPSupported*/ + TCPM_TRACE_GET_CC, /*USBPD_TCPM_get_cc*/ + TCPM_TRACE_SET_POLARITY, /*USBPD_TCPM_set_polarity*/ + TCPM_TRACE_SET_VCONN, /*USBPD_TCPM_set_vconn*/ + TCPM_TRACE_SET_MSG_HEADER, /*USBPD_TCPM_set_msg_header*/ + TCPM_TRACE_SET_RX_STATE, /*USBPD_TCPM_set_rx_state*/ + TCPM_TRACE_SET_GET_MESSAGE, /*USBPD_TCPM_get_message*/ + TCPM_TRACE_TRANSMIT, /*USBPD_TCPM_transmit*/ + TCPM_TRACE_RESET_REQUEST, /*USBPD_PHY_ResetRequest*/ + TCPM_TRACE_SEND_BIST, /*USBPD_PHY_Send_BIST_Pattern*/ + TCPM_TRACE_SEND_BIST_PATTERN, /*USBPD_TCPM_Send_BIST_Pattern*/ + TCPM_TRACE_SINK_TXNG, /*USBPD_PHY_SetResistor_SinkTxNG*/ + TCPM_TRACE_SINK_TXOK, /*USBPD_PHY_SetResistor_SinkTxOK*/ + TCPM_TRACE_SINK_IF_TXOK, /*USBPD_PHY_IsResistor_SinkTxOk*/ + TCPM_TRACE_FAST_ROLE_SWAP, /*USBPD_PHY_FastRoleSwapSignalling*/ + TCPM_TRACE_ENABLE_RX, /* tcpc_EnableRx */ + TCPM_TRACE_DISABLE_RX, /* tcpc_DisableRx */ + TCPM_TRACE_SET_PIN_ROLE, /* tcpc_tcpc_set_cc */ +} USBPD_TCPM_TRACE; + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ +extern TRACE_ENTRY_POINT USBPD_Trace; +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USBPD_CORE_TRACE_Exported_Functions USBPD CORE TRACE Exported Functions + * @{ + */ +/** + * @brief Initialize the TRACE module + * @retval None + */ +void USBPD_TRACE_Init(void); + +/** + * @brief DeInitialize the TRACE module + * @retval None + */ +void USBPD_TRACE_DeInit(void); + +/** + * @brief Add information in debug trace buffer + * @param Type Trace Type based on @ref TRACE_EVENT + * @param PortNum Port number value + * @param Sop SOP type + * @param Ptr Pointer on the data to send + * @param Size Size of the data to send + * @retval None. + */ +void USBPD_TRACE_Add(TRACE_EVENT Type, uint8_t PortNum, uint8_t Sop, uint8_t *Ptr, uint32_t Size); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_CAD_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_NOPD_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_NOPD_CM0PLUS_Keil.lib new file mode 100644 index 0000000..88c84e2 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_NOPD_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_NOPD_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_NOPD_CM0PLUS_wc32.a new file mode 100644 index 0000000..6a03fae Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_NOPD_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_1_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_1_CM0PLUS_Keil.lib new file mode 100644 index 0000000..f6ba783 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_1_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_1_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_1_CM0PLUS_wc32.a new file mode 100644 index 0000000..e8653cd Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_1_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSNK_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSNK_CM0PLUS_Keil.lib new file mode 100644 index 0000000..93953d6 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSNK_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSNK_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSNK_CM0PLUS_wc32.a new file mode 100644 index 0000000..9e79f80 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSNK_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSRC_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSRC_CM0PLUS_Keil.lib new file mode 100644 index 0000000..7b79ecf Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSRC_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSRC_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSRC_CM0PLUS_wc32.a new file mode 100644 index 0000000..ac112d9 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_CONFIG_MINSRC_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_FULL_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_FULL_CM0PLUS_Keil.lib new file mode 100644 index 0000000..c96d8a4 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_FULL_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_FULL_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_FULL_CM0PLUS_wc32.a new file mode 100644 index 0000000..07e985c Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD2_FULL_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_1_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_1_CM0PLUS_Keil.lib new file mode 100644 index 0000000..1e90482 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_1_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_1_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_1_CM0PLUS_wc32.a new file mode 100644 index 0000000..a70ee95 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_1_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_2_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_2_CM0PLUS_Keil.lib new file mode 100644 index 0000000..65f4ad7 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_2_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_2_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_2_CM0PLUS_wc32.a new file mode 100644 index 0000000..99cbc39 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_2_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSNK_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSNK_CM0PLUS_Keil.lib new file mode 100644 index 0000000..922cb02 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSNK_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSNK_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSNK_CM0PLUS_wc32.a new file mode 100644 index 0000000..7a96b71 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSNK_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSRC_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSRC_CM0PLUS_Keil.lib new file mode 100644 index 0000000..58127f1 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSRC_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSRC_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSRC_CM0PLUS_wc32.a new file mode 100644 index 0000000..4a8a22f Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_CONFIG_MINSRC_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_FULL_CM0PLUS_Keil.lib b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_FULL_CM0PLUS_Keil.lib new file mode 100644 index 0000000..1a58ae7 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_FULL_CM0PLUS_Keil.lib differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_FULL_CM0PLUS_wc32.a b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_FULL_CM0PLUS_wc32.a new file mode 100644 index 0000000..70f40d4 Binary files /dev/null and b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/lib/USBPDCORE_PD3_FULL_CM0PLUS_wc32.a differ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/src/usbpd_trace.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/src/usbpd_trace.c new file mode 100644 index 0000000..7681cbb --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Core/src/usbpd_trace.c @@ -0,0 +1,217 @@ +/** + ****************************************************************************** + * @file usbpd_trace.c + * @author MCD Application Team + * @brief This file contains trace control functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#define USBPD_TRACE_C + +#include "usbpd_def.h" +#include "usbpd_core.h" +#include "usbpd_trace.h" +#ifdef _TRACE +#include "tracer_emb.h" +#endif + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_CORE + * @{ + */ + +/** @addtogroup USBPD_CORE_TRACE + * @{ + */ + +/* Private enums -------------------------------------------------------------*/ +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup USBPD_CORE_TRACE_Private_Defines USBPD TRACE Private Defines + * @{ + */ + +#define TRACE_SIZE_HEADER_TRACE 9u /* Type + Time x 2 + PortNum + Sop + Size */ + +#define TRACE_PORT_BIT_POSITION 5u /* Bit position of port number in TAG id */ + +#define TLV_SOF (uint8_t)0xFDu +#define TLV_EOF (uint8_t)0xA5u +#define TLV_SIZE_MAX 256u +#define TLV_HEADER_SIZE 3u /* Size of TLV header (TAG(1) + LENGTH(2) */ +#define TLV_SOF_SIZE 4u /* TLV_SOF * 4 */ +#define TLV_EOF_SIZE 4u /* TLV_EOF * 4 */ + +#define DEBUG_STACK_MESSAGE 0x12u +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup USBPD_CORE_TRACE_Private_Macros USBPD TRACE Private Macros + * @{ + */ +#define __TRACE_SET_TAG_ID(_PORT_, _TAG_) (((_PORT_) << TRACE_PORT_BIT_POSITION) | (_TAG_)) + +#define TRACER_EMB_WRITE_DATA(_POSITION_,_DATA_) TRACER_EMB_WriteData((_POSITION_),(_DATA_));\ + (_POSITION_) = ((_POSITION_) + 1u); + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +const uint8_t OverFlow_String[] = { TLV_SOF, TLV_SOF, TLV_SOF, TLV_SOF, /* Buffer header */ + 0x32, /* Tag id */ + 0x0, 0x18, /* Length */ + 0x6, /* Type */ + 0x0, 0x0, 0x0, 0x0, /* Time */ + 0x0, /* PortNum */ + 0x0, /* SOP */ + 0x0, 0x0F, /* Size */ + 'T','R','A','C','E',' ','O','V','E','R','_','F','L','O','W', /* Data */ + TLV_EOF, TLV_EOF, TLV_EOF, TLV_EOF /* Buffer end */ + }; + +/** @defgroup USBPD_CORE_TRACE_Private_Variables USBPD TRACE Private Variables + * @{ + */ +extern uint32_t HAL_GetTick(void); +extern void USBPD_DPM_TraceWakeUp(void); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup USBPD_CORE_TRACE_Exported_Functions + * @{ + */ +void USBPD_TRACE_Init(void) +{ +#if defined(_TRACE) + /* initialize tracer module */ + TRACER_EMB_Init(); + + /* Initialize PE trace */ + USBPD_PE_SetTrace(USBPD_TRACE_Add, 3u); + + /* Initialize the overflow detection */ + (void)TRACER_EMB_EnableOverFlow(OverFlow_String, sizeof(OverFlow_String)); +#else + return; +#endif +} + +void USBPD_TRACE_DeInit(void) +{ + /* Nothing to do */ + return; +} + +void USBPD_TRACE_Add(TRACE_EVENT Type, uint8_t PortNum, uint8_t Sop, uint8_t *Ptr, uint32_t Size) +{ +#if defined(_TRACE) + uint32_t _time; + int32_t _writepos; + uint32_t index; + + /* Get trace timing */ + _time = HAL_GetTick(); + + TRACER_EMB_Lock(); + + /* Data are encapsulate inside a TLV string*/ + /* Allocate buffer Size */ + _writepos = TRACER_EMB_AllocateBufer(Size + TRACE_SIZE_HEADER_TRACE + TLV_HEADER_SIZE + TLV_SOF_SIZE + TLV_EOF_SIZE); + + /* Check allocation */ + if (_writepos != -1) + { + /* Copy SOF bytes */ + for (index = 0u; index < TLV_SOF_SIZE; index++) + { + TRACER_EMB_WRITE_DATA(_writepos, TLV_SOF); + } + /* Copy the TAG */ + TRACER_EMB_WRITE_DATA(_writepos, __TRACE_SET_TAG_ID((PortNum + 1u), DEBUG_STACK_MESSAGE)); + /* Copy the LENGTH */ + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)((Size + TRACE_SIZE_HEADER_TRACE) >> 8u)); + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)(Size+ TRACE_SIZE_HEADER_TRACE)); + + /* Trace type */ + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)Type); + + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)_time); + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)(_time >> 8u)); + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)(_time >> 16u)); + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)(_time >> 24u)); + + TRACER_EMB_WRITE_DATA(_writepos, PortNum); + TRACER_EMB_WRITE_DATA(_writepos, Sop); + + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)(Size >> 8u)); + TRACER_EMB_WRITE_DATA(_writepos, (uint8_t)Size); + + /* initialize the Ptr for Read/Write */ + for (index = 0u; index < Size; index++) + { + TRACER_EMB_WRITE_DATA(_writepos, Ptr[index]); + } + + /* Copy EOF bytes */ + for (index = 0u; index < TLV_EOF_SIZE; index++) + { + TRACER_EMB_WRITE_DATA(_writepos, TLV_EOF); + } + } + + TRACER_EMB_UnLock(); + + TRACER_EMB_SendData(); +#else + return; +#endif +} + +/** + * @} + */ + +/** @defgroup USBPD_CORE_TRACE_Private_Functions USBPD TRACE Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_cad_hw_if.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_cad_hw_if.h new file mode 100644 index 0000000..0cf0af4 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_cad_hw_if.h @@ -0,0 +1,88 @@ +/** + ****************************************************************************** + * @file usbpd_cad_hw_if.h + * @author MCD Application Team + * @brief This file contains the headers of usbpd_cad_hw_if.c for Cable Attach-Detach + * controls. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +#ifndef __USBPD_CAD_HW_IF_H_ +#define __USBPD_CAD_HW_IF_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_core.h" + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_DEVICE + * @{ + */ + +/** @addtogroup USBPD_DEVICE_CAD_HW_IF + * @{ + */ + + +/* Exported types ------------------------------------------------------------*/ +/* Exported define -----------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +#if defined(USBPDCORE_DRP) || defined(USBPDCORE_SRC) +/* Keep for legacy */ +uint32_t CAD_Set_ResistorRp(uint8_t PortNum, CAD_RP_Source_Current_Adv_Typedef RpValue); +#endif /* USBPDCORE_DRP || USBPDCORE_SRC */ + +/** @addtogroup USBPD_DEVICE_CAD_HW_IF_Exported_Functions + * @{ + */ +void CAD_Init(uint8_t PortNum, USBPD_SettingsTypeDef *Settings, USBPD_ParamsTypeDef *Params, void (*PtrWakeUp)(void)); +uint32_t CAD_StateMachine(uint8_t PortNum, USBPD_CAD_EVENT *Event, CCxPin_TypeDef *CCXX); +void CAD_Enter_ErrorRecovery(uint8_t PortNum); +#if defined(USBPDCORE_DRP) || defined(USBPDCORE_SRC) +uint32_t CAD_SRC_Set_ResistorRp(uint8_t PortNum, CAD_RP_Source_Current_Adv_Typedef RpValue); +#endif /* USBPDCORE_DRP || USBPDCORE_SRC */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_CAD_HW_IF_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_devices_conf_template.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_devices_conf_template.h new file mode 100644 index 0000000..c2c5dd4 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_devices_conf_template.h @@ -0,0 +1,156 @@ +/** + ****************************************************************************** + * @file usbpd_devices_conf.h + * @author MCD Application Team + * @brief This file contains the device define. + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#ifndef USBPD_DEVICE_CONF_H +#define USBPD_DEVICE_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_adc.h" +#include "stm32g0xx_ll_bus.h" +#if defined(USBPD_HW_C)||defined(USBPD_BSP_TRACE_C) +#include "stm32g0xx_ll_dma.h" +#endif +#if defined(USBPD_HW_C)||defined(USBPD_BSP_TRACE_C) +#include "stm32g0xx_ll_gpio.h" +#endif +#include "stm32g0xx_ll_usart.h" +#include "stm32g0xx_ll_ucpd.h" +#include "stm32g0xx_ll_rcc.h" +#include "stm32g0xx_ll_tim.h" + +/* Following include file may be replaced with the BSP UBSPD PWR header file */ +#if defined(STM32G081xx) +#include "stm32g081b_eval_usbpd_pwr.h" +#else +#include "usbpd_bsp_pwr.h" +#endif + +/* Private typedef -----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ----------------------------------------------------------------------------- + usbpd_hw.c +-------------------------------------------------------------------------------*/ + +/* defined used to configure function : USBPD_HW_GetUSPDInstance */ +#define UCPD_INSTANCE0 UCPD1 +#define UCPD_INSTANCE1 UCPD2 + +/* defined used to configure function : USBPD_HW_Init_DMARxInstance,USBPD_HW_DeInit_DMARxInstance */ +#define UCPDDMA_INSTANCE0_CLOCKENABLE_RX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) +#define UCPDDMA_INSTANCE1_CLOCKENABLE_RX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) + +#define UCPDDMA_INSTANCE0_DMA_RX DMA1 +#define UCPDDMA_INSTANCE1_DMA_RX DMA1 + +#define UCPDDMA_INSTANCE0_REQUEST_RX DMA_REQUEST_UCPD1_RX +#define UCPDDMA_INSTANCE1_REQUEST_RX DMA_REQUEST_UCPD2_RX + +#define UCPDDMA_INSTANCE0_LL_CHANNEL_RX LL_DMA_CHANNEL_5 +#define UCPDDMA_INSTANCE1_LL_CHANNEL_RX LL_DMA_CHANNEL_2 + +#define UCPDDMA_INSTANCE0_CHANNEL_RX DMA1_Channel5 +#define UCPDDMA_INSTANCE1_CHANNEL_RX DMA1_Channel2 + +/* defined used to configure function : USBPD_HW_Init_DMATxInstance, USBPD_HW_DeInit_DMATxInstance */ +#define UCPDDMA_INSTANCE0_CLOCKENABLE_TX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) +#define UCPDDMA_INSTANCE1_CLOCKENABLE_TX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) + +#define UCPDDMA_INSTANCE0_DMA_TX DMA1 +#define UCPDDMA_INSTANCE1_DMA_TX DMA1 + +#define UCPDDMA_INSTANCE0_REQUEST_TX DMA_REQUEST_UCPD1_TX +#define UCPDDMA_INSTANCE1_REQUEST_TX DMA_REQUEST_UCPD2_TX + +#define UCPDDMA_INSTANCE0_LL_CHANNEL_TX LL_DMA_CHANNEL_3 +#define UCPDDMA_INSTANCE1_LL_CHANNEL_TX LL_DMA_CHANNEL_4 + +#define UCPDDMA_INSTANCE0_CHANNEL_TX DMA1_Channel3 +#define UCPDDMA_INSTANCE1_CHANNEL_TX DMA1_Channel4 + +/* defined used to configure USBPD_HW_SetFRSSignalling */ +#define UCPDFRS_INSTANCE0_FRSCC1 do{ \ + LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOA); \ + LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_2, LL_GPIO_MODE_ALTERNATE); \ + LL_GPIO_SetAFPin_0_7(GPIOA, LL_GPIO_PIN_2, LL_GPIO_AF_4); \ + } while(0) + +#define UCPDFRS_INSTANCE1_FRSCC1 + +#define UCPDFRS_INSTANCE0_FRSCC2 do{ \ + LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB); \ + LL_GPIO_SetPinMode(GPIOB, LL_GPIO_PIN_0, LL_GPIO_MODE_ALTERNATE); \ + LL_GPIO_SetAFPin_0_7(GPIOB, LL_GPIO_PIN_0, LL_GPIO_AF_6); \ + } while(0) + +#define UCPDFRS_INSTANCE1_FRSCC2 + +#define UCPD_INSTANCE0_ENABLEIRQ do{ \ + NVIC_SetPriority(UCPD1_2_IRQn,2); \ + NVIC_EnableIRQ(UCPD1_2_IRQn); \ + } while(0) + +#define UCPD_INSTANCE1_ENABLEIRQ do{ \ + NVIC_SetPriority(UCPD1_2_IRQn,2); \ + NVIC_EnableIRQ(UCPD1_2_IRQn); \ + } while(0) + +/* ----------------------------------------------------------------------------- + Definitions for timer service feature +-------------------------------------------------------------------------------*/ +#define TIMX TIM2 +#define TIMX_CLK_ENABLE LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2) +#define TIMX_CLK_DISABLE LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_TIM2) +#define TIMX_IRQ TIM2_IRQn +#define TIMX_CHANNEL_CH1 LL_TIM_CHANNEL_CH1 +#define TIMX_CHANNEL_CH2 LL_TIM_CHANNEL_CH2 +#define TIMX_CHANNEL_CH3 LL_TIM_CHANNEL_CH3 +#define TIMX_CHANNEL_CH4 LL_TIM_CHANNEL_CH4 +#define TIMX_CHANNEL1_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH1(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC1(TIMX); \ + }while(0) +#define TIMX_CHANNEL2_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH2(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC2(TIMX); \ + }while(0) +#define TIMX_CHANNEL3_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH3(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC3(TIMX); \ + }while(0) +#define TIMX_CHANNEL4_SETEVENT do{ \ + LL_TIM_OC_SetCompareCH4(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\ + LL_TIM_ClearFlag_CC4(TIMX); \ + }while(0) +#define TIMX_CHANNEL1_GETFLAG LL_TIM_IsActiveFlag_CC1 +#define TIMX_CHANNEL2_GETFLAG LL_TIM_IsActiveFlag_CC2 +#define TIMX_CHANNEL3_GETFLAG LL_TIM_IsActiveFlag_CC3 +#define TIMX_CHANNEL4_GETFLAG LL_TIM_IsActiveFlag_CC4 + +#ifdef __cplusplus +} +#endif + +#endif /* USBPD_DEVICE_CONF_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_hw.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_hw.h new file mode 100644 index 0000000..d2b16f0 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_hw.h @@ -0,0 +1,36 @@ +/** + ****************************************************************************** + * @file usbpd_hw.h + * @author MCD Application Team + * @brief This file contains interface hw control. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#ifndef USBPD_HW_H +#define USBPD_HW_H +/* Includes ------------------------------------------------------------------*/ +/* Private typedef -----------------------------------------------------------*/ +/* Variable containing ADC conversions results */ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +UCPD_TypeDef *USBPD_HW_GetUSPDInstance(uint8_t PortNum); +DMA_Channel_TypeDef *USBPD_HW_Init_DMARxInstance(uint8_t PortNum); +void USBPD_HW_DeInit_DMARxInstance(uint8_t PortNum); +DMA_Channel_TypeDef *USBPD_HW_Init_DMATxInstance(uint8_t PortNum); +void USBPD_HW_DeInit_DMATxInstance(uint8_t PortNum); +uint32_t USBPD_HW_GetRpResistorValue(uint8_t Portnum); +void USBPD_HW_SetFRSSignalling(uint8_t Portnum, uint8_t cc); +#endif /* USBPD_BSP_HW_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_hw_if.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_hw_if.h new file mode 100644 index 0000000..a6d9437 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_hw_if.h @@ -0,0 +1,379 @@ +/** + ****************************************************************************** + * @file usbpd_hw_if.h + * @author MCD Application Team + * @brief This file contains the headers of usbpd_hw_if.h for USB-PD Hardware + Interface layer. This file is specific for each device. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#ifndef __USBPD_HW_IF_H_ +#define __USBPD_HW_IF_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_def.h" +#include "usbpd_devices_conf.h" + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_DEVICE + * @{ + */ + +/** @addtogroup USBPD_DEVICE_HW_IF + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup USBPD_DEVICE_DEVICE_HW_IF_Exported_Types USBPD DEVICE HW_IF Exported Types + * @{ + */ + +/** + * @brief Enum used to get the status of decoding + */ +typedef enum +{ + USBPD_PHY_RX_STATUS_NONE, + USBPD_PHY_RX_STATUS_OK, + USBPD_PHY_RX_STATUS_SOP_DETECTING, + USBPD_PHY_RX_STATUS_DATA, + USBPD_PHY_RX_STATUS_MESSAGE_READY, + USBPD_PHY_RX_STATUS_ERROR, + USBPD_PHY_RX_STATUS_ERROR_UNSUPPORTED_SOP, + USBPD_PHY_RX_STATUS_ERROR_INVALID_SOP, + USBPD_PHY_RX_STATUS_ERROR_INVALID_SYMBOL, + USBPD_PHY_RX_STATUS_ERROR_EOP_NOT_FOUND, + USBPD_PHY_RX_STATUS_ERROR_CRC_FAILED, +} +USBPD_PHY_RX_Status_TypeDef; + +/** + * @brief CallBacks exposed by the HW_IF to the PHY + */ +typedef struct +{ + /** + * @brief The message transfer has been completed + * @param PortNum Port number + * @param Status (0 means OK) + * @retval None + */ + void (*USBPD_HW_IF_TxCompleted)(uint8_t PortNum, uint32_t Status); + + /** + * @brief Bist data sent callback from PHY_HW_IF + * @param PortNum Port number + * @param bistmode: Bist mode + * @retval None + */ + void (*USBPD_HW_IF_BistCompleted)(uint8_t PortNum, USBPD_BISTMsg_TypeDef bistmode); + + /** + * @brief The reception phase of an hard reset is completed notify it. + * @param PortNum Port number + * @param SOPType SOP Message Type based on @ref USBPD_SOPType_TypeDef + * @retval None + */ + void (*USBPD_HW_IF_RX_ResetIndication)(uint8_t PortNum, USBPD_SOPType_TypeDef Type); + + /** + * @brief The reception phase of the current message is completed and notify it. + * @param PortNum Port number + * @param MsgType Message Type + * @retval None + */ + void (*USBPD_HW_IF_RX_Completed)(uint8_t PortNum, uint32_t MsgType); + + /** + * @brief The emission of HRST has been completed. + * @param PortNum Port number + * @retval None + */ + void (*USBPD_HW_IF_TX_HardResetCompleted)(uint8_t PortNum, USBPD_SOPType_TypeDef Type); + + /** + * @brief FRS reception. + * @param PortNum Port number + * @retval None + */ + void (*USBPD_HW_IF_TX_FRSReception)(uint8_t PortNum); + +} USBPD_HW_IF_Callbacks; + +/** @defgroup USBPD_PORT_HandleTypeDef USB PD handle Structure definition for USBPD_PHY_HW_IF + * @brief USBPD PORT handle Structure definition + * @{ + */ +typedef struct +{ + UCPD_TypeDef *husbpd; /*!< UCPD Handle parameters */ + DMA_Channel_TypeDef *hdmatx; /*!< Tx DMA Handle parameters */ + DMA_Channel_TypeDef *hdmarx; /*!< Rx DMA Handle parameters */ + + USBPD_SettingsTypeDef *settings; + USBPD_ParamsTypeDef *params; + USBPD_HW_IF_Callbacks cbs; /*!< USBPD_PHY_HW_IF callbacks */ + + void (*USBPD_CAD_WakeUp)(void); /*!< function used to wakeup cad task */ + + uint8_t *ptr_RxBuff; /*!< Pointer to Raw Rx transfer Buffer */ + + CCxPin_TypeDef CCx; /*!< CC pin used for communication */ +} USBPD_PORT_HandleTypeDef; + +extern USBPD_PORT_HandleTypeDef Ports[USBPD_PORT_COUNT]; + +/** + * @} + */ + +/** + * @} + */ + +/* Exported define -----------------------------------------------------------*/ + +/** @defgroup USBPD_DEVICE_DEVICE_HW_IF_Exported_Defines USBPD DEVICE HW_IF Exported Defines + * @{ + */ + +#define SIZE_MAX_PD_TRANSACTION_CHUNK 30u +#define SIZE_MAX_PD_TRANSACTION_UNCHUNK (260u + 4u) + +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USBPD_DEVICE_DEVICE_HW_IF_Exported_Functions USBPD DEVICE HW_IF Exported Functions + * @{ + */ + +/** + * @brief Enable the interrupt for the reception. + * @param PortNum The handle of the port. + * @retval None + */ +void USBPDM1_RX_EnableInterrupt(uint8_t PortNum); + +/** + * @brief stop bist carrier mode 2. + * @param PortNum The port handle. + * @retval None + */ +void USBPD_HW_IF_StopBISTMode2(uint8_t PortNum); + +/** + * @brief Initialize specific peripheral for the APP. + * @retval None + */ +void USBPD_HW_IF_GlobalHwInit(void); + +/** + * @brief Send a Buffer . + * @note The data will be converted in bmc and send through the line + * @param PortNum The port handle. + * @param Type SOP Message Type based on @ref USBPD_SOPType_TypeDef + * @param pBuffer Data buffer to be transmitted + * @param Bitsize The number of bits to be transmitted + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_HW_IF_SendBuffer(uint8_t PortNum, USBPD_SOPType_TypeDef Type, uint8_t *pBuffer, uint32_t Bitsize); + +#if defined(_SRC) || defined(_DRP) +/** + * @brief Enable the VBUS on a specified port. + * @param PortNum The port handle. + * @param State ENABLE or DISABLE. + * @param Cc CC pin based on @ref CCxPin_TypeDef + * @param VconnState VCONN State activation + * @param role The role of the port. + * @retval USBPD status + */ +USBPD_StatusTypeDef HW_IF_PWR_Enable(uint8_t PortNum, USBPD_FunctionalState State, CCxPin_TypeDef Cc, uint32_t VconnState, USBPD_PortPowerRole_TypeDef role); +#endif /* _SRC || _DRP */ + +/** + * @brief Retrieve the VBUS status for a specified port. + * @param PortNum The port handle. + * @retval FunctionalState + */ +USBPD_FunctionalState HW_IF_PWR_VBUSIsEnabled(uint8_t PortNum); + +/** + * @brief Set the VBUS voltage level on a specified port. + * @param PortNum The port handle. + * @param Voltage voltage value to be set. + * @retval USBPD status + */ +USBPD_StatusTypeDef HW_IF_PWR_SetVoltage(uint8_t PortNum, uint16_t Voltage); + +/** + * @brief Get the voltage level on a specified port. + * @param PortNum The port handle. + * @retval The voltage value + */ +uint16_t HW_IF_PWR_GetVoltage(uint8_t PortNum); + +/** + * @brief Get the current level on a specified port. + * @param PortNum The port handle. + * @retval The current value + */ +int16_t HW_IF_PWR_GetCurrent(uint8_t PortNum); + +/** + * @brief Connect the Rp resitors on the CC lines + * @param PortNum The port handle. + * @retval none + */ +void USBPDM1_AssertRp(uint8_t PortNum); + +/** + * @brief Disconnect the Rp resitors on the CC lines + * @param PortNum The port handle. + * @retval none + */ +void USBPDM1_DeAssertRp(uint8_t PortNum); + +/** + * @brief Connect the Rd resitors on the CC lines + * @param PortNum The port handle. + * @retval none + */ +void USBPDM1_AssertRd(uint8_t PortNum); + +/** + * @brief Disconnect the Rd resitors on the CC lines + * @param PortNum The port handle. + * @retval none + */ +void USBPDM1_DeAssertRd(uint8_t PortNum); + +/** + * @brief Set the CCx pin. + * @param PortNum The port handle. + * @param cc Specify the ccx to be selected. + * @retval None + */ +void USBPDM1_Set_CC(uint8_t PortNum, CCxPin_TypeDef cc); + +/** + * @brief Sends the BIST pattern + * @param PortNum The port handle. + * @retval none + */ +void USBPD_HW_IF_Send_BIST_Pattern(uint8_t PortNum); + +/** + * @brief Sends a detachemnt signal. + * @param PortNum The port handle. + * @retval none + */ +void HW_SignalDetachment(uint8_t PortNum); + +/** + * @brief Sends an Attachment signal. + * @param PortNum The port handle. + * @param cc the PD pin. + * @retval none + */ +void HW_SignalAttachement(uint8_t PortNum, CCxPin_TypeDef cc); + +/** + * @brief Set SinkTxNG resistor. + * @param PortNum The port handle. + * @retval none + */ +void USBPD_HW_IF_SetResistor_SinkTxNG(uint8_t PortNum); + +/** + * @brief Set SinkTxOk resistor. + * @param PortNum The port handle. + * @retval none + */ +void USBPD_HW_IF_SetResistor_SinkTxOK(uint8_t PortNum); + +/** + * @brief Is SinkTxOk resistor. + * @param PortNum The port handle. + * @retval TRUE FALSE + */ +uint8_t USBPD_HW_IF_IsResistor_SinkTxOk(uint8_t PortNum); + +/** + * @brief send a Fast Role swap signalling. + * @param PortNum The port handle. + * @retval None + */ +void USBPD_HW_IF_FastRoleSwapSignalling(uint8_t PortNum); + +/** + * @brief enter in error recovery state. + * @param PortNum The port handle. + * @retval None + */ +void USBPDM1_EnterErrorRecovery(uint8_t PortNum); + + +void USBPD_PORT0_IRQHandler(void); +void USBPD_PORT1_IRQHandler(void); + +/** + * @brief Enable RX + * @param PortNum The port handle. + * @retval None + */ +void USBPD_HW_IF_EnableRX(uint8_t PortNum); + +/** + * @brief Disable RX + * @param PortNum The port handle. + * @retval None + */ +void USBPD_HW_IF_DisableRX(uint8_t PortNum); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_HW_IF_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_phy.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_phy.h new file mode 100644 index 0000000..292e8fe --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_phy.h @@ -0,0 +1,155 @@ +/** + ****************************************************************************** + * @file usbpd_phy.h + * @author MCD Application Team + * @brief This file contains the headers of usbpd_phy.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#ifndef __USBPD_PHY_H_ +#define __USBPD_PHY_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_DEVICE + * @{ + */ + +/** @addtogroup USBPD_DEVICE_PHY + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup USBPD_DEVICE_PHY_Exported_TypeDef USBPD DEVICE PHY Exported TypeDef + * @{ + */ +/** + * @brief CallBacks exposed by the @ref USBPD_DEVICE_PHY to the USBPD_CORE_PRL + */ +typedef struct +{ + /** + * @brief Reports that a message has been received on a specified port. + * @note Received data are stored inside PortNum->pRxBuffPtr + * function called in the interrupt context + * @param PortNum The handle of the port + * @param Type The type of the message received @ref USBPD_SOPType_TypeDef + * @retval None + */ + void (*USBPD_PHY_MessageReceived)(uint8_t PortNum, USBPD_SOPType_TypeDef Type); + + /** + * @brief Reports to the PRL that a Reset received from channel. + * @param PortNum The handle of the port + * @param Type The type of reset performed @ref USBPD_SOPTYPE_HARD_RESET or @ref USBPD_SOPTYPE_CABLE_RESET + * @retval None + */ + void (*USBPD_PHY_ResetIndication)(uint8_t PortNum, USBPD_SOPType_TypeDef Type); + + /** + * @brief Reports to the PRL that a Reset operation has been completed. + * @param PortNum The handle of the port + * @param Type The type of reset performed @ref USBPD_SOPTYPE_HARD_RESET or @ref USBPD_SOPTYPE_CABLE_RESET + * @retval None + */ + void (*USBPD_PHY_ResetCompleted)(uint8_t PortNum, USBPD_SOPType_TypeDef Type); + + /** + * @brief Reports to the PRL that a Bist operation has been completed. + * @param PortNum The handle of the port + * @param Type The type of Bist performed @ref USBPD_BISTMsg_TypeDef + * @retval None + */ + void (*USBPD_PHY_BistCompleted)(uint8_t PortNum, USBPD_BISTMsg_TypeDef bistmode); + + /** + * @brief Reports to the PRL that a tx operation has been completed. + * @param PortNum: The handle of the port + * @param Status: 0 if no error else error + * @retval None + */ + void (*USBPD_PHY_TxCompleted)(uint8_t PortNum, uint32_t Status); + + /** + * @brief Reports to the PRL that an FRS has been detected. + * @param PortNum: The handle of the port + * @retval None + */ + void (*USBPD_PHY_FastRoleSwapReception)(uint8_t PortNum); + +} USBPD_PHY_Callbacks; + +/** + * @} + */ + +/* Exported define -----------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup USBPD_DEVICE_PHY_Exported_Functions + * @{ + */ +USBPD_StatusTypeDef USBPD_PHY_Init(uint8_t PortNum, const USBPD_PHY_Callbacks *cbs, uint8_t *pRxBuffer, USBPD_PortPowerRole_TypeDef role, uint32_t SupportedSOP); +void USBPD_PHY_Reset(uint8_t PortNum); +uint16_t USBPD_PHY_GetRetryTimerValue(uint8_t PortNum); +uint16_t USBPD_PHY_GetMinGOODCRCTimerValue(uint8_t PortNum); + +USBPD_StatusTypeDef USBPD_PHY_ResetRequest(uint8_t PortNum, USBPD_SOPType_TypeDef Type); +USBPD_StatusTypeDef USBPD_PHY_SendMessage(uint8_t PortNum, USBPD_SOPType_TypeDef Type, uint8_t *pBuffer, uint16_t Size); +USBPD_StatusTypeDef USBPD_PHY_Send_BIST_Pattern(uint8_t PortNum); +USBPD_StatusTypeDef USBPD_PHY_ExitTransmit(uint8_t PortNum, USBPD_SOPType_TypeDef BistType); +void USBPD_PHY_SetResistor_SinkTxNG(uint8_t PortNum); +void USBPD_PHY_SetResistor_SinkTxOK(uint8_t PortNum); +uint8_t USBPD_PHY_IsResistor_SinkTxOk(uint8_t PortNum); +void USBPD_PHY_FastRoleSwapSignalling(uint8_t PortNum); +void USBPD_PHY_SOPSupported(uint8_t PortNum, uint32_t SOPSupported); + +void USBPD_PHY_EnableRX(uint8_t PortNum); +void USBPD_PHY_DisableRX(uint8_t PortNum); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_PHY_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_timersserver.h b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_timersserver.h new file mode 100644 index 0000000..c5fc893 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/inc/usbpd_timersserver.h @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file usbpd_timersserver.h + * @author MCD Application Team + * @brief This file contains the headers of usbpd_timerserver.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#ifndef __USBPD_TIMERSSERVER_H_ +#define __USBPD_TIMERSSERVER_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_DEVICE + * @{ + */ + +/** @addtogroup USBPD_DEVICE_TIMESERVER + * @{ + */ + +/* Exported constants --------------------------------------------------------*/ +typedef enum { + TIM_PORT0_CRC, + TIM_PORT0_RETRY, + TIM_PORT1_CRC, + TIM_PORT1_RETRY, + TIM_MAX +} +TIM_identifier; + +#define TIM_MAX_TIME 10000u /*time in us, means 10 ms */ +/* Exported types ------------------------------------------------------------*/ +/* External variables --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +void USBPD_TIM_Init(void); +void USBPD_TIM_DeInit(void); +void USBPD_TIM_Start(TIM_identifier Id, uint32_t TimeUs); +uint32_t USBPD_TIM_IsExpired(TIM_identifier Id); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBPD_TIMERSSERVER_H_ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_cad_hw_if.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_cad_hw_if.c new file mode 100644 index 0000000..2046d54 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_cad_hw_if.c @@ -0,0 +1,1745 @@ +/** + ****************************************************************************** + * @file usbpd_cad_hw_if.c + * @author MCD Application Team + * @brief This file contains power hardware interface cad functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#define USBPD_CAD_HW_IF_C +#include "usbpd_devices_conf.h" +#include "usbpd_hw.h" +#include "usbpd_def.h" +#include "usbpd_cad_hw_if.h" +#include "usbpd_hw_if.h" +#if defined(_TRACE) +#include "usbpd_trace.h" +#endif /* _TRACE*/ +#include "string.h" + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_DEVICE + * @{ + */ + +/** @addtogroup USBPD_DEVICE_CAD_HW_IF + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/** + * @brief CAD State Machine funtion pointer + * @{ + */ +typedef uint32_t CAD_StateMachinePtr(uint8_t PortNum, USBPD_CAD_EVENT *Event, CCxPin_TypeDef *CCXX); + +/** + * @brief CAD State value @ref USBPD_DEVICE_CAD_HW_IF + * @{ + */ +typedef enum { + USBPD_CAD_STATE_RESET = 0U, /*!< USBPD CAD State Reset */ + USBPD_CAD_STATE_DETACHED = 1U, /*!< USBPD CAD State No cable detected */ + USBPD_CAD_STATE_ATTACHED_WAIT = 2U, /*!< USBPD CAD State Port partner detected */ + USBPD_CAD_STATE_ATTACHED = 3U, /*!< USBPD CAD State Port partner attached */ +#if defined(_DRP) || defined(_SRC) + USBPD_CAD_STATE_EMC = 4U, /*!< USBPD CAD State Electronically Marked Cable detected */ + USBPD_CAD_STATE_ATTEMC = 5U, /*!< USBPD CAD State Port Partner detected throug EMC */ +#if defined(_ACCESSORY_SRC) + USBPD_CAD_STATE_DEBUG = 7U, /*!< USBPD CAD State Debug detected */ + USBPD_CAD_STATE_ACCESSORY = 6U, /*!< USBPD CAD State Accessory detected */ +#endif /* _ACCESSORY_SRC */ +#endif /* _DRP || _SRC */ + USBPD_CAD_STATE_SWITCH_TO_SRC = 8U, /*!< USBPD CAD State switch to Source */ + USBPD_CAD_STATE_SWITCH_TO_SNK = 9U, /*!< USBPD CAD State switch to Sink */ + USBPD_CAD_STATE_UNKNOW = 10U, /*!< USBPD CAD State unknow */ + USBPD_CAD_STATE_DETACH_SRC = 11U, + USBPD_CAD_STATE_ERRORRECOVERY = 12U, /*!< USBPD CAD State error recovery */ + USBPD_CAD_STATE_ERRORRECOVERY_EXIT = 13U, /*!< USBPD CAD State to exit error recovery */ +#if defined(_SNK) && defined(_ACCESSORY_SNK) + USBPD_CAD_STATE_UNATTACHED_ACCESSORY = 14U, /*!< USBPD CAD State Unattached.Accessory */ + USBPD_CAD_STATE_AUDIO_ACCESSORY = 15U, /*!< USBPD CAD State Wait detached after Accessory detection */ +#endif /* _SNK && _ACCESSORY_SNK */ + USBPD_CAD_STATE_ATTACHED_ACCESSORY_WAIT = 16U, +#if defined(USBPDCORE_VPD) + USBPD_CAD_STATE_POWERED_ACCESSORY = 17U, + USBPD_CAD_STATE_UNSUPPORTED_ACCESSORY = 18U, + USBPD_CAD_STATE_CTVPD_UNATTACHED = 19U, + USBPD_CAD_STATE_CTVPD_ATTACHED = 20U +#endif /* USBPDCORE_VPD */ +} USBPD_CAD_STATE; +/** + * @} + */ + +/** + * @brief USB PD CC lines HW condition + */ +typedef enum { + HW_Detachment = 0x00UL, /*!< Nothing attached */ + HW_Attachment = 0x01UL, /*!< Sink attached */ + HW_PwrCable_NoSink_Attachment = 0x02UL, /*!< Powered cable without Sink attached */ + HW_PwrCable_Sink_Attachment = 0x03UL, /*!< Powered cable with Sink or VCONN-powered Accessory attached */ + HW_Debug_Attachment = 0x04UL, /*!< Debug Accessory Mode attached */ + HW_AudioAdapter_Attachment = 0x05UL, /*!< Audio Adapter Accessory Mode attached */ +} CAD_HW_Condition_TypeDef; + +/** + * @brief CAD State value @ref USBPD_DEVICE_CAD_HW_IF + * @{ + */ +typedef struct +{ + CCxPin_TypeDef cc : 2; + CAD_HW_Condition_TypeDef CurrentHWcondition : 3; + uint32_t CAD_tDebounce_flag : 1; + uint32_t CAD_tDebounceAcc_flag : 1; + uint32_t CAD_ErrorRecoveryflag : 1; + uint32_t CAD_ResistorUpdateflag : 1; + USBPD_CAD_STATE cstate : 5; /* current state */ + uint32_t CAD_Accessory_SRC : 1; + uint32_t CAD_Accessory_SNK : 1; + uint32_t reserved : 1; + USBPD_CAD_STATE pstate : 5; /* previous state */ +#if defined(USBPDCORE_VPD) + uint32_t CAD_VPD_SRC : 1; + uint32_t CAD_VPD_SNK : 1; + uint32_t reserved2 : 8; +#else + uint32_t reserved2 : 10; +#endif /* USBPDCORE_VPD */ + +#if defined(_DRP) || defined(_ACCESSORY_SNK) + uint32_t CAD_tToggle_start; +#endif /* _DRP */ + uint32_t CAD_tDebounce_start; /* Variable used for attach or detach debounce timers */ + CAD_StateMachinePtr *CAD_PtrStateMachine; +} CAD_HW_HandleTypeDef; +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +#define CAD_TPDDEBOUCE_THRESHOLD 12u /**< tPDDebounce threshold between 10 to 20ms */ +#define CAD_TCCDEBOUCE_THRESHOLD 120u /**< tCCDebounce threshold between 100 to 200ms */ +#define CAD_TSRCDISCONNECT_THRESHOLD 2u /**< tSRCDisconnect detach threshold between 0 to 20ms */ +#define CAD_INFINITE_TIME 0xFFFFFFFFu /**< infinite time to wait a new interrupt event */ +#define CAD_TERROR_RECOVERY_TIME 26u /**< tErrorRecovery min 25ms */ +#define CAD_DEFAULT_TIME 2u /**< default transition timing of the state machine */ +#define CAD_ACCESSORY_TOGGLE 40u /**< toggle time for snk accessory detection */ +#define CAD_TVPDDETACH 10u /**< tVPDDetach timing between 10 and 20 ms */ + +#if defined(_DRP) || defined(_SRC) +#define CAD_DETACH_POLLING 40u +#elif defined(_SNK) +#define CAD_DETACH_POLLING 100u +#endif /* _DRP || _SRC */ + +#if defined(_LOW_POWER) +#define CAD_VBUS_POLLING_TIME 38u +#else +#define CAD_VBUS_POLLING_TIME 10u +#endif /* _LOW_POWER */ + +/* Private macro -------------------------------------------------------------*/ + +/* Private variables ---------------------------------------------------------*/ +/* handle to manage the detection state machine */ +static CAD_HW_HandleTypeDef CAD_HW_Handles[USBPD_PORT_COUNT]; + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup USBPD_DEVICE_CAD_HW_IF_Private_Functions USBPD DEVICE_CAD HW IF Private Functions + * @{ + */ +#if !defined(USBPDCORE_LIB_NO_PD) || defined(USBPD_TYPE_STATE_MACHINE) +#if defined(_DRP) || defined(_SRC) +static void CAD_Check_HW_SRC(uint8_t PortNum); +#endif /* _DRP || _SRC */ + +#if defined(_DRP) || defined(_SNK) +static uint32_t ManageStateAttachedWait_SNK(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +static uint32_t ManageStateAttached_SNK(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +static uint32_t ManageStateDetached_SNK(uint8_t PortNum); +static void CAD_Check_HW_SNK(uint8_t PortNum); +#endif /* _DRP || _SNK */ + +#if defined(_DRP) +static uint32_t ManageStateAttachedWait_DRP(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +static uint32_t ManageStateAttached_DRP(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +#endif /* _DRP */ + +#if defined(_DRP) || defined(_SRC) +static uint32_t ManageStateAttachedWait_SRC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +#endif /* _DRP || _SRC || (_ACCESSORY && _SNK) */ + +#if defined(_SRC) || defined(_DRP) +static uint32_t ManageStateDetached_SRC(uint8_t PortNum); +#endif /* _SRC */ + +#if defined(_DRP) || defined(_SRC) +static uint32_t ManageStateEMC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +static uint32_t ManageStateAttached_SRC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +#endif /* _DRP || _SRC */ + +#if defined(_DRP) +static uint32_t ManageStateDetached_DRP(uint8_t PortNum); +#endif /* _DRP */ + + +#if defined(_SNK) +static uint32_t CAD_StateMachine_SNK(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +#endif /* _SNK */ + +#if defined(_SRC) +static uint32_t CAD_StateMachine_SRC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +#endif /* _SRC */ + +#if defined(_DRP) +static uint32_t CAD_StateMachine_DRP(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX); +#endif /* _DRP */ + +#endif /* !USBPDCORE_LIB_NO_PD || USBPD_TYPE_STATE_MACHINE */ + +/** + * @} + */ + +/** @defgroup USBPD_DEVICE_CAD_HW_IF_Exported_Functions USBPD DEVICE_CAD HW IF Exported Functions + * @{ + */ + +/** + * @brief function to initialize the cable detection state machine + * @param PortNum port + * @param pSettings Pointer on PD settings based on @ref USBPD_SettingsTypeDef + * @param pParams Pointer on PD params based on @ref USBPD_ParamsTypeDef + * @param WakeUp Wake-up callback function used for waking up CAD + * @retval None + */ +void CAD_Init(uint8_t PortNum, USBPD_SettingsTypeDef *pSettings, USBPD_ParamsTypeDef *pParams, void (*WakeUp)(void)) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + LL_UCPD_InitTypeDef settings; + + Ports[PortNum].params = pParams; + Ports[PortNum].settings = pSettings; + Ports[PortNum].params->RpResistor = Ports[PortNum].settings->CAD_DefaultResistor; + Ports[PortNum].params->SNKExposedRP_AtAttach = vRd_Undefined; + + memset(_handle, 0, sizeof(CAD_HW_HandleTypeDef)); + + Ports[PortNum].USBPD_CAD_WakeUp = WakeUp; + + /* Initialize the USBPD_IP */ + Ports[PortNum].husbpd = USBPD_HW_GetUSPDInstance(PortNum); + + /* Initialize usbpd */ + LL_UCPD_StructInit(&settings); + (void)LL_UCPD_Init(Ports[PortNum].husbpd, &settings); + LL_UCPD_SetRxOrderSet(Ports[PortNum].husbpd, LL_UCPD_ORDERSET_SOP | LL_UCPD_ORDERSET_SOP1 | LL_UCPD_ORDERSET_SOP2 | LL_UCPD_ORDERSET_CABLERST | LL_UCPD_ORDERSET_HARDRST); + /* Controls whether pull-ups and pull-downs controls related to ANAMODE and ANASUBMODE should be applied to CC1 and CC2 analog PHYs */ + /* Should be done when UCPDEN is 1 */ + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_CC1CC2); + +#ifdef _LOW_POWER + LL_UCPD_WakeUpEnable(Ports[PortNum].husbpd); +#endif /* _LOW_POWER */ + + +#if !defined(USBPDCORE_LIB_NO_PD) || defined(USBPD_TYPE_STATE_MACHINE) + /* Init power */ + BSP_USBPD_PWR_Init(PortNum); +#endif /* !USBPDCORE_LIB_NO_PD || USBPD_TYPE_STATE_MACHINE */ + +#ifdef USBPD_PWR_CAPTIVE_CABLE_ENABLED + BSP_USBPD_PWR_CaptiveCablePreConfig(PortNum); +#endif /* USBPD_PWR_CAPTIVE_CABLE_ENABLED */ + + /* Enable USBPD IP */ + LL_UCPD_Enable(Ports[PortNum].husbpd); + +#if defined(_SRC) || defined(_DRP) + /* Initialize usbpd interrupt */ + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].params->PE_PowerRole) + { + USBPDM1_AssertRp(PortNum); + } +#endif /* _SRC || _DRP */ +#if defined(_DRP) + else +#endif /* _DRP */ +#if defined(_SNK) || defined(_DRP) + { + USBPDM1_AssertRd(PortNum); + } +#endif /* _SNK || _DRP */ + +#ifdef USBPD_PWR_CAPTIVE_CABLE_ENABLED + BSP_USBPD_PWR_CaptiveCablePostConfig(PortNum); +#endif /* USBPD_PWR_CAPTIVE_CABLE_ENABLED */ + + /* Set the state machine according the SW configuration */ +#if !defined(USBPDCORE_LIB_NO_PD) +#if defined(_DRP) + if (Ports[PortNum].settings->CAD_RoleToggle == USBPD_TRUE) + { + _handle->CAD_PtrStateMachine = CAD_StateMachine_DRP; + _handle->CAD_Accessory_SRC = Ports[PortNum].settings->CAD_AccesorySupport; +#if defined(USBPDCORE_VPD) + _handle->CAD_VPD_SRC = Ports[PortNum].settings->CAD_VPDSupport; +#endif /* USBPDCORE_VPD */ + } + else +#endif /* !USBPDCORE_LIB_NO_PD */ + { +#if defined(_SRC) + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].settings->PE_DefaultRole) + { + _handle->CAD_PtrStateMachine = CAD_StateMachine_SRC; + _handle->CAD_Accessory_SRC = Ports[PortNum].settings->CAD_AccesorySupport; +#if defined(USBPDCORE_VPD) + _handle->CAD_VPD_SRC = Ports[PortNum].settings->CAD_VPDSupport; +#endif /* USBPDCORE_VPD */ + } + else +#endif /* _SRC */ + { +#if defined(_SNK) + _handle->CAD_PtrStateMachine = CAD_StateMachine_SNK; + _handle->CAD_Accessory_SNK = Ports[PortNum].settings->CAD_AccesorySupport; +#if defined(USBPDCORE_VPD) + _handle->CAD_VPD_SNK = Ports[PortNum].settings->VPDSupport; +#endif /* USBPDCORE_VPD */ +#endif /* _SNK */ + } + } +#else /* USBPDCORE_LIB_NO_PD */ +#if defined(USBPD_TYPE_STATE_MACHINE) +#if defined(_SRC) + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].settings->PE_DefaultRole) + { + _handle->CAD_PtrStateMachine = CAD_StateMachine_SRC; +#if !defined(USBPDCORE_LIB_NO_PD) + _handle->CAD_Accessory_SRC = Ports[PortNum].settings->CAD_AccesorySupport; +#endif /* !USBPDCORE_LIB_NO_PD */ +#if defined(USBPDCORE_VPD) + _handle->CAD_VPD_SRC = Ports[PortNum].settings->CAD_VPDSupport; +#endif /* USBPDCORE_VPD */ + } + else +#endif /* _SRC */ + { +#if defined(_SNK) + _handle->CAD_PtrStateMachine = CAD_StateMachine_SNK; +#if !defined(USBPDCORE_LIB_NO_PD) + _handle->CAD_Accessory_SNK = Ports[PortNum].settings->CAD_AccesorySupport; +#endif /* !USBPDCORE_LIB_NO_PD */ +#if defined(USBPDCORE_VPD) + _handle->CAD_VPD_SNK = Ports[PortNum].settings->CAD_VPDSupport; +#endif /* USBPDCORE_VPD */ +#endif /* _SNK */ + } +#endif /* USBPD_TYPE_STATE_MACHINE */ +#endif /* USBPDCORE_LIB_NO_PD */ +} + +/** + * @brief function to force CAD state machine into error recovery state + * @param PortNum Index of current used port + * @retval None + */ +void CAD_Enter_ErrorRecovery(uint8_t PortNum) +{ + /* remove the ucpd resistor */ + USBPDM1_EnterErrorRecovery(PortNum); + /* set the error recovery flag to allow the stack to switch into errorRecovery Flag */ + CAD_HW_Handles[PortNum].CAD_ErrorRecoveryflag = USBPD_TRUE; + Ports[PortNum].USBPD_CAD_WakeUp(); +} + +#if defined(USBPDCORE_DRP) || defined(USBPDCORE_SRC) +/** + * @brief function to force the value of the RP resistor + * @note Must be called only if you want change the settings value + * @param PortNum Index of current used port + * @param RpValue RP value to set in devices based on @ref CAD_RP_Source_Current_Adv_Typedef + * @retval 0 success else error + */ +uint32_t CAD_SRC_Set_ResistorRp(uint8_t PortNum, CAD_RP_Source_Current_Adv_Typedef RpValue) +{ + /* update the information about the default resistor value presented in detach mode */ + Ports[PortNum].params->RpResistor = RpValue; + + /* inform state machine about a resistor update */ + CAD_HW_Handles[PortNum].CAD_ResistorUpdateflag = USBPD_TRUE; + Ports[PortNum].USBPD_CAD_WakeUp(); + return 0; +} + +/* Keep for legacy */ +uint32_t CAD_Set_ResistorRp(uint8_t PortNum, CAD_RP_Source_Current_Adv_Typedef RpValue) +{ + return CAD_SRC_Set_ResistorRp(PortNum, RpValue); +} +#endif /* USBPDCORE_DRP || USBPDCORE_SRC */ + +#if !defined(USBPDCORE_LIB_NO_PD) || defined(USBPD_TYPE_STATE_MACHINE) + +/** + * @brief CAD State machine + * @param PortNum Port + * @param pEvent Pointer on CAD event based on @ref USBPD_CAD_EVENT + * @param pCCXX Pointer on CC Pin based on @ref CCxPin_TypeDef + * @retval Timeout value + */ +#if defined(_SNK) +/* function to handle SNK and SNK + ACCESSORY OPTION */ +uint32_t CAD_StateMachine_SNK(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + +#if defined(USBPDM1_VCC_FEATURE_ENABLED) + BSP_USBPD_PWR_VCCSetState(PortNum, 1); +#endif /* USBPDM1_VCC_FEATURE_ENABLED */ + + /*Check CAD STATE*/ + switch (_handle->cstate) + { + case USBPD_CAD_STATE_DETACHED: + { + _timing = ManageStateDetached_SNK(PortNum); + break; + } + + case USBPD_CAD_STATE_ATTACHED_WAIT: + _timing = ManageStateAttachedWait_SNK(PortNum, pEvent, pCCXX); + break; + + case USBPD_CAD_STATE_ATTACHED: + _timing = ManageStateAttached_SNK(PortNum, pEvent, pCCXX); + break; + +#if defined(_ACCESSORY_SNK) + case USBPD_CAD_STATE_UNATTACHED_ACCESSORY: + { + uint32_t cc; + cc = Ports[PortNum].husbpd->SR & (UCPD_SR_TYPEC_VSTATE_CC1 | UCPD_SR_TYPEC_VSTATE_CC2); + + _handle->CAD_tDebounce_flag = USBPD_FALSE; + if((USBPD_TRUE == _handle->CAD_Accessory_SNK) && (cc == (LL_UCPD_SRC_CC1_VRA | LL_UCPD_SRC_CC2_VRA))) + { + /* Get the time of this event */ + _handle->CAD_tDebounce_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_ATTACHED_ACCESSORY_WAIT; + } +#if defined(USBPDCORE_VPD) + else if ((USBPD_TRUE == _handle->CAD_VPD_SNK) && + ((cc == (LL_UCPD_SRC_CC1_VRD | LL_UCPD_SRC_CC2_VRA) || ((LL_UCPD_SRC_CC1_VRA | LL_UCPD_SRC_CC2_VRD) == cc))) + ) + { + _handle->CAD_tDebounce_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_ATTACHED_ACCESSORY_WAIT; + } +#endif /* USBPDCORE_VPD */ + else if ( + ((cc == (LL_UCPD_SRC_CC1_VRD | LL_UCPD_SRC_CC2_VRA) || ((LL_UCPD_SRC_CC1_VRA | LL_UCPD_SRC_CC2_VRD) == cc))) + ) + { + if ((HAL_GetTick() - _handle->CAD_tToggle_start) > 200) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + USBPDM1_AssertRd(PortNum); + } + } + else + { + if ((HAL_GetTick() - _handle->CAD_tToggle_start) > CAD_ACCESSORY_TOGGLE) /* tOnePortToggleConnect between 0 and 80ms */ + { + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + USBPDM1_AssertRd(PortNum); + } + } + break; + } + + case USBPD_CAD_STATE_ATTACHED_ACCESSORY_WAIT : + { + uint32_t cc; + cc = Ports[PortNum].husbpd->SR & (UCPD_SR_TYPEC_VSTATE_CC1 | UCPD_SR_TYPEC_VSTATE_CC2); + _handle->CAD_tDebounce_flag = USBPD_FALSE; + switch(cc) + { + case LL_UCPD_SRC_CC1_VRA | LL_UCPD_SRC_CC2_VRA : /* Audio accessory */ + { + /* check if the device is still connected after the debouce timming */ + if (HAL_GetTick() - _handle->CAD_tDebounce_start > CAD_TCCDEBOUCE_THRESHOLD) + { + _handle->cstate = USBPD_CAD_STATE_AUDIO_ACCESSORY; + *pEvent = USBPD_CAD_EVENT_ACCESSORY; + } + break; + } +#if defined(USBPDCORE_VPD) + case LL_UCPD_SRC_CC1_VRD | LL_UCPD_SRC_CC2_VRA: /* VPD CC1 */ + case LL_UCPD_SRC_CC1_VRA | LL_UCPD_SRC_CC2_VRD: /* VPD CC2 */ + { + if (HAL_GetTick() - _handle->CAD_tDebounce_start > CAD_TCCDEBOUCE_THRESHOLD) + { + _handle->cstate = USBPD_CAD_STATE_POWERED_ACCESSORY; + *pEvent = USPPD_CAD_EVENT_VPD; + Ports[PortNum].params->PE_VPDStatus = VPD_UNKNOWN; + Ports[PortNum].params->CAD_VPDStatus = VPD_NONE; + if((LL_UCPD_SRC_CC1_VRD | LL_UCPD_SRC_CC2_VRA) == cc) + { + _handle->cc = CC1; + } + else + { + _handle->cc = CC2; + } + *pCCXX = _handle->cc; + HW_SignalAttachement(PortNum, _handle->cc); + } + break; + } +#endif /* USBPDCORE_VPD */ + default : + { + if(( HAL_GetTick() - _handle->CAD_tDebounce_start) > CAD_TCCDEBOUCE_THRESHOLD) + { + /* Get the time of this event */ + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + USBPDM1_AssertRd(PortNum); + } + break; + } + } + break; + } + + case USBPD_CAD_STATE_AUDIO_ACCESSORY: + { + /* check if the device is still connected after the debouce timming */ + if(( LL_UCPD_SRC_CC1_VRA != (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1)) + && ( LL_UCPD_SRC_CC2_VRA != (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2))) + { + if (USBPD_FALSE == _handle->CAD_tDebounce_flag) + { + _handle->CAD_tDebounce_start = HAL_GetTick(); + _handle->CAD_tDebounce_flag = USBPD_TRUE; + _timing = CAD_TCCDEBOUCE_THRESHOLD + 49U; + } + else + { + if ((HAL_GetTick() - _handle->CAD_tDebounce_start) > (CAD_TCCDEBOUCE_THRESHOLD + 50U)) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->CAD_tDebounce_flag = USBPD_FALSE; + _handle->cstate = USBPD_CAD_STATE_DETACHED; + _handle->cc = CCNONE; + USBPDM1_AssertRd(PortNum); + *pEvent = USBPD_CAD_EVENT_DETACHED; + *pCCXX = CCNONE; + } + } + } + else + { + _handle->CAD_tDebounce_flag = USBPD_FALSE; + _timing = CAD_INFINITE_TIME; + } + break; + } + +#if defined(USBPDCORE_VPD) + case USBPD_CAD_STATE_POWERED_ACCESSORY: + { + uint32_t cc; + cc = Ports[PortNum].husbpd->SR & (UCPD_SR_TYPEC_VSTATE_CC1 | UCPD_SR_TYPEC_VSTATE_CC2); + + /* if SRC.Open detected on the monitored PIN switch to Unattached.SNK */ + if(((CC1 == _handle->cc) && (LL_UCPD_SRC_CC1_OPEN == (cc & UCPD_SR_TYPEC_VSTATE_CC1))) || + ((CC2 == _handle->cc) && (LL_UCPD_SRC_CC2_OPEN == (cc & UCPD_SR_TYPEC_VSTATE_CC2)))) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + Ports[PortNum].params->PE_VPDStatus = VPD_NONE; + *pEvent = USBPD_CAD_EVENT_DETACHED; + USBPDM1_AssertRd(PortNum); + } + else + { + /* if the port is not PD or a SRC it must switch to try.SNK */ + if (VPD_NOPD == Ports[PortNum].params->CAD_VPDStatus) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + *pEvent = USBPD_CAD_EVENT_DETACHED; + USBPDM1_AssertRd(PortNum); + Ports[PortNum].params->PE_VPDStatus = VPD_NONE; + } + /* if the port is PD but doesn't enter Alternate mode within tAMETimeout switch to Unsupported.Accessory */ + else if (VPD_FAILED_ENTER_ALTERNATE == Ports[PortNum].params->CAD_VPDStatus) + { + _handle->cstate = USBPD_CAD_STATE_UNSUPPORTED_ACCESSORY; + } + /* if Powered USB DEvice confirmed transition to CTUnattached.SNK */ + else if (VPD_DETECTED == Ports[PortNum].params->CAD_VPDStatus) + { + _handle->cstate = USBPD_CAD_STATE_CTVPD_UNATTACHED; + } + } + break; + } + + case USBPD_CAD_STATE_UNSUPPORTED_ACCESSORY: + { + uint32_t cc; + cc = Ports[PortNum].husbpd->SR & (UCPD_SR_TYPEC_VSTATE_CC1 | UCPD_SR_TYPEC_VSTATE_CC2); + + /* if SRC.Open detected on the monitored PIN switch to Unattached.SNK */ + if((LL_UCPD_SRC_CC1_OPEN == (cc | UCPD_SR_TYPEC_VSTATE_CC1)) || + (LL_UCPD_SRC_CC2_OPEN == (cc | UCPD_SR_TYPEC_VSTATE_CC2))) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + *pEvent = USBPD_CAD_EVENT_DETACHED; + USBPDM1_AssertRp(PortNum); + } + break; + } + + case USBPD_CAD_STATE_CTVPD_UNATTACHED: + { + if (USBPD_TRUE == USBPD_PWR_IF_GetVBUSStatus(PortNum, USBPD_PWR_VSAFE5V)) /* Check if Vbus is on */ + { + /* the charger/SRC has been plug */ + _handle->cstate = USBPD_CAD_STATE_CTVPD_ATTACHED; + } + else + { + uint32_t cc; + cc = Ports[PortNum].husbpd->SR & (UCPD_SR_TYPEC_VSTATE_CC1 | UCPD_SR_TYPEC_VSTATE_CC2); + + /* if VBUS is VSafe0V and CC low for tVPDDetach = 10/20ms */ + if(((LL_UCPD_SRC_CC1_OPEN == (cc | UCPD_SR_TYPEC_VSTATE_CC1)) || + (LL_UCPD_SRC_CC2_OPEN == (cc | UCPD_SR_TYPEC_VSTATE_CC2))) && + (USBPD_TRUE == USBPD_PWR_IF_GetVBUSStatus(PortNum, USBPD_PWR_BELOWVSAFE0V))) + { + if (USBPD_TRUE == _handle->CAD_tDebounce_flag) + { + _handle->CAD_tDebounce_start = HAL_GetTick(); + } + else + { + if (HAL_GetTick() - _handle->CAD_tDebounce_start > CAD_TVPDDETACH) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + *pEvent = USBPD_CAD_EVENT_DETACHED; + USBPDM1_AssertRp(PortNum); + } + } + } + else + { + _handle->CAD_tDebounce_flag = USBPD_FALSE; + } + } + break; + } + + case USBPD_CAD_STATE_CTVPD_ATTACHED: + { + /* if VBUS removed */ + if (USBPD_TRUE == USBPD_PWR_IF_GetVBUSStatus(PortNum, USBPD_PWR_SNKDETACH)) + { + /* the charger/SRC has been unplug */ + _handle->cstate = USBPD_CAD_STATE_CTVPD_UNATTACHED; + } + break; + } +#endif /* USBPDCORE_VPD */ +#endif /* _ACCESSORY_SNK */ + + default: + { + break; + } + } + +#if defined(USBPDM1_VCC_FEATURE_ENABLED) + switch(_handle->pstate) + { + case USBPD_CAD_STATE_ATTACHED_WAIT: + case USBPD_CAD_STATE_ATTACHED: + case USBPD_CAD_STATE_ERRORRECOVERY : + case USBPD_CAD_STATE_ERRORRECOVERY_EXIT: + /* nothing to do, the VCC must stay high */ + break; + default : + BSP_USBPD_PWR_VCCSetState(PortNum, 0); + _timing = 2; + break; + } +#endif /* USBPDM1_VCC_FEATURE_ENABLED */ + + return _timing; +} +#endif /* _SNK */ + +#if defined(_SRC) +/* function to handle SRC */ +uint32_t CAD_StateMachine_SRC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + /*Check CAD STATE*/ + switch (_handle->cstate) + { + case USBPD_CAD_STATE_DETACH_SRC : + { +#if defined(_VCONN_SUPPORT) + /* DeInitialize Vconn management */ + (void)BSP_USBPD_PWR_VCONNDeInit(PortNum, (Ports[PortNum].CCx == CC1) ? 1u : 2u); +#endif /* _VCONN_SUPPORT */ + /* DeInitialise VBUS power */ + (void)BSP_USBPD_PWR_VBUSDeInit(PortNum); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + _timing = 0; + break; + } + + case USBPD_CAD_STATE_SWITCH_TO_SNK : + case USBPD_CAD_STATE_DETACHED: + { + _timing = ManageStateDetached_SRC(PortNum); + break; + } + + case USBPD_CAD_STATE_ATTACHED_WAIT: + { + _timing = ManageStateAttachedWait_SRC(PortNum, pEvent, pCCXX); + break; + } + +#if defined(_ACCESSORY_SRC) + case USBPD_CAD_STATE_ACCESSORY: + { + _timing = CAD_INFINITE_TIME; + CAD_Check_HW_SRC(PortNum); + if ((HW_AudioAdapter_Attachment != _handle->CurrentHWcondition) + && (HW_PwrCable_Sink_Attachment != _handle->CurrentHWcondition)) + { + _handle->cstate = USBPD_CAD_STATE_DETACH_SRC; + *pCCXX = CCNONE; + _handle->cc = CCNONE; + *pEvent = USBPD_CAD_EVENT_DETACHED; + } + break; + } + + case USBPD_CAD_STATE_DEBUG: + { + _timing = CAD_INFINITE_TIME; + CAD_Check_HW_SRC(PortNum); + if (_handle->CurrentHWcondition != HW_Debug_Attachment) + { + _handle->cstate = USBPD_CAD_STATE_DETACH_SRC; + *pCCXX = CCNONE; + _handle->cc = CCNONE; + *pEvent = USBPD_CAD_EVENT_DETACHED; + } + break; + } +#endif /* _ACCESSORY_SRC */ + + case USBPD_CAD_STATE_EMC : + { + _timing = ManageStateEMC(PortNum, pEvent, pCCXX); + break; + } + + /*CAD electronic cable with Sink ATTACHED*/ + case USBPD_CAD_STATE_ATTEMC: + case USBPD_CAD_STATE_ATTACHED: + { + _timing = ManageStateAttached_SRC(PortNum, pEvent, pCCXX); + break; + } + + default : + { + break; + } + } + + return _timing; +} +#endif /* _SRC */ + +#if defined(_DRP) +/* function to handle DRP */ +uint32_t CAD_StateMachine_DRP(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + /*Check CAD STATE*/ + switch (_handle->cstate) + { + case USBPD_CAD_STATE_DETACH_SRC : + { +#if defined(_VCONN_SUPPORT) + /* DeInitialize Vconn management */ + (void)BSP_USBPD_PWR_VCONNDeInit(PortNum, (Ports[PortNum].CCx == CC1) ? 1u : 2u); +#endif /* _VCONN_SUPPORT */ + /* DeInitialise VBUS power */ + (void)BSP_USBPD_PWR_VBUSDeInit(PortNum); + _timing = 0; + _handle->cstate = USBPD_CAD_STATE_SWITCH_TO_SNK; + break; + } + + case USBPD_CAD_STATE_SWITCH_TO_SRC: + case USBPD_CAD_STATE_SWITCH_TO_SNK: + { + LL_UCPD_RxDisable(Ports[PortNum].husbpd); + if (USBPD_CAD_STATE_SWITCH_TO_SRC == _handle->cstate) + { + USBPDM1_AssertRp(PortNum); + Ports[PortNum].params->PE_PowerRole = USBPD_PORTPOWERROLE_SRC; + Ports[PortNum].params->PE_DataRole = USBPD_PORTDATAROLE_DFP; + _timing = Ports[PortNum].settings->CAD_SRCToggleTime; + } + if (USBPD_CAD_STATE_SWITCH_TO_SNK == _handle->cstate) + { + USBPDM1_AssertRd(PortNum); + Ports[PortNum].params->PE_PowerRole = USBPD_PORTPOWERROLE_SNK; + Ports[PortNum].params->PE_DataRole = USBPD_PORTDATAROLE_UFP; + _timing = Ports[PortNum].settings->CAD_SNKToggleTime; + } + _handle->CAD_tToggle_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_DETACHED; + } + break; + + case USBPD_CAD_STATE_DETACHED: + _timing = ManageStateDetached_DRP(PortNum); + break; + + /*CAD STATE ATTACHED WAIT*/ + case USBPD_CAD_STATE_ATTACHED_WAIT: + _timing = ManageStateAttachedWait_DRP(PortNum, pEvent, pCCXX); + break; + +#if defined(_ACCESSORY_SRC) + case USBPD_CAD_STATE_ACCESSORY: + { + CAD_Check_HW_SRC(PortNum); + if ((HW_AudioAdapter_Attachment != _handle->CurrentHWcondition) + && (HW_PwrCable_Sink_Attachment != _handle->CurrentHWcondition)) + { + _handle->cstate = USBPD_CAD_STATE_DETACH_SRC; + *pCCXX = CCNONE; + _handle->cc = CCNONE; + *pEvent = USBPD_CAD_EVENT_DETACHED; + } + else + { + _timing = CAD_INFINITE_TIME; + } + break; + } + + case USBPD_CAD_STATE_DEBUG: + { + _timing = CAD_INFINITE_TIME; + CAD_Check_HW_SRC(PortNum); + if (_handle->CurrentHWcondition != HW_Debug_Attachment) + { + _handle->cstate = USBPD_CAD_STATE_DETACH_SRC; + *pCCXX = CCNONE; + _handle->cc = CCNONE; + *pEvent = USBPD_CAD_EVENT_DETACHED; + } + break; + } +#endif /* _ACCESSORY_SRC */ + + /* CAD ELECTRONIC CABLE ATTACHED */ + case USBPD_CAD_STATE_EMC : + _timing = ManageStateEMC(PortNum, pEvent, pCCXX); + break; + + /*CAD electronic cable with Sink ATTACHED*/ + case USBPD_CAD_STATE_ATTEMC: + case USBPD_CAD_STATE_ATTACHED: + _timing = ManageStateAttached_DRP(PortNum, pEvent, pCCXX); + break; + + default : + break; + } + + return _timing; +} +#endif /* _DRP */ +#endif /* !USBPDCORE_LIB_NO_PD || USBPD_TYPE_STATE_MACHINE */ + +#if !defined(USBPDCORE_LIB_NO_PD) +uint32_t CAD_StateMachine(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + /* set by default event to none */ + *pEvent = USBPD_CAD_EVENT_NONE; + + if (USBPD_TRUE == Ports[PortNum].params->PE_SwapOngoing) + { + return _timing; + } + + if (_handle->CAD_ErrorRecoveryflag == USBPD_TRUE) + { + /* Force the state error recovery */ + _handle->CAD_ErrorRecoveryflag = USBPD_FALSE; + _handle->cstate = USBPD_CAD_STATE_ERRORRECOVERY; +#if defined(_TRACE) + USBPD_TRACE_Add(USBPD_TRACE_CAD_LOW, PortNum, (uint8_t)_handle->cstate, NULL, 0); +#endif /* _TRACE */ + } + + switch(_handle->cstate) + { + case USBPD_CAD_STATE_RESET: + { +#if !defined(_LOW_POWER) && !defined(USBPDM1_VCC_FEATURE_ENABLED) + LL_UCPD_EnableIT_TypeCEventCC2(Ports[PortNum].husbpd); + LL_UCPD_EnableIT_TypeCEventCC1(Ports[PortNum].husbpd); +#endif /* !_LOW_POWER */ + if( 0 == PortNum) + { + UCPD_INSTANCE0_ENABLEIRQ; + } +#if USBPD_PORT_COUNT > 1 + else + { + UCPD_INSTANCE1_ENABLEIRQ; + } +#endif /* USBPD_PORT_COUNT > 1 */ +#if defined(_DRP) || defined(_ACCESSORY_SNK) + _handle->CAD_tToggle_start = HAL_GetTick(); +#endif /* _DRP || _ACCESSORY_SNK */ + _handle->cstate = USBPD_CAD_STATE_DETACHED; + break; + } + + case USBPD_CAD_STATE_ERRORRECOVERY : + { + /* Remove the resistor */ + /* Enter recovery = Switch to SRC with no resistor */ + USBPDM1_EnterErrorRecovery(PortNum); + + /* forward detach event to DPM */ + Ports[PortNum].CCx = CCNONE; + *pCCXX = CCNONE; + _handle->cc = CCNONE; + *pEvent = USBPD_CAD_EVENT_DETACHED; + + /* start tErrorRecovery timeout */ + _handle->CAD_tDebounce_start = HAL_GetTick(); + _timing = CAD_TERROR_RECOVERY_TIME; + _handle->cstate = USBPD_CAD_STATE_ERRORRECOVERY_EXIT; + break; + } + + case USBPD_CAD_STATE_ERRORRECOVERY_EXIT : + { + if ((HAL_GetTick() - _handle->CAD_tDebounce_start) > CAD_TERROR_RECOVERY_TIME) + { + /* reconfigure the port + port source to src + port snk to snk + port drp to src */ + +#if defined(_SRC) || defined(_DRP) + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].params->PE_PowerRole) + { + USBPDM1_AssertRp(PortNum); + } +#endif /* _SRC || _DRP */ +#if defined(_DRP) + else +#endif /* _DRP */ +#if defined(_SNK) + { + USBPDM1_AssertRd(PortNum); + } +#endif /* _SNK */ + /* switch to state detach */ +#if defined(_DRP) || defined(_ACCESSORY_SNK) + _handle->CAD_tToggle_start = HAL_GetTick(); +#endif /* _DRP || _ACCESSORY_SNK */ + _handle->cstate = USBPD_CAD_STATE_DETACHED; + } + break; + } + + default: + { + /* call the state machine corresponding to the port SNK or SRC or DRP */ + _timing = _handle->CAD_PtrStateMachine(PortNum, pEvent, pCCXX); + break; + } + } + +#if defined(_TRACE) + if (_handle->cstate != _handle->pstate) + { + _handle->pstate = _handle->cstate; + USBPD_TRACE_Add(USBPD_TRACE_CAD_LOW, PortNum, (uint8_t)_handle->cstate, NULL, 0); +#if defined(CAD_DEBUG_TRACE) + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].params->PE_PowerRole) + { + USBPD_TRACE_Add(USBPD_TRACE_CAD_LOW, PortNum, (uint8_t)(0xC0 | _handle->CurrentHWcondition), NULL, 0); + } + else + { + USBPD_TRACE_Add(USBPD_TRACE_CAD_LOW, PortNum, (uint8_t)(0x80 | (Ports[PortNum].params->SNKExposedRP_AtAttach << 4) | _handle->CurrentHWcondition), NULL, 0); + } +#endif /* CAD_DEBUG_TRACE */ + } +#endif /* _TRACE */ + + return _timing; +} + +#elif defined(USBPDCORE_LIB_NO_PD) && defined(USBPD_TYPE_STATE_MACHINE) +uint32_t CAD_StateMachine(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + /* set by default event to none */ + *pEvent = USBPD_CAD_EVENT_NONE; + + switch(_handle->cstate) + { + case USBPD_CAD_STATE_RESET: + { +#ifndef _LOW_POWER + LL_UCPD_EnableIT_TypeCEventCC2(Ports[PortNum].husbpd); + LL_UCPD_EnableIT_TypeCEventCC1(Ports[PortNum].husbpd); +#endif + if( 0 == PortNum) + { + UCPD_INSTANCE0_ENABLEIRQ; + } +#if USBPD_PORT_COUNT > 1 + else + { + UCPD_INSTANCE1_ENABLEIRQ; + } +#endif /* USBPD_PORT_COUNT */ +#if defined(_DRP) || defined(_ACCESSORY_SNK) + _handle->CAD_tToggle_start = HAL_GetTick(); +#endif /* _DRP || _ACCESSORY_SNK */ + _handle->cstate = USBPD_CAD_STATE_DETACHED; + break; + } + + default: + { + /* call the state machine corresponding to the port SNK or SRC or DRP */ + _timing = _handle->CAD_PtrStateMachine(PortNum, pEvent, pCCXX); + break; + } + } + +#if defined(_TRACE) + if (_handle->cstate != _handle->pstate) + { + _handle->pstate = _handle->cstate; + USBPD_TRACE_Add(USBPD_TRACE_CAD_LOW, PortNum, (uint8_t)_handle->cstate, NULL, 0); +#if defined(CAD_DEBUG_TRACE) + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].params->PE_PowerRole) + { + USBPD_TRACE_Add(USBPD_TRACE_CAD_LOW, PortNum, (uint8_t)(0xC0 | _handle->CurrentHWcondition), NULL, 0); + } + else + { + USBPD_TRACE_Add(USBPD_TRACE_CAD_LOW, PortNum, (uint8_t)(0x80 | (Ports[PortNum].params->SNKExposedRP_AtAttach << 4) | _handle->CurrentHWcondition), NULL, 0); + } +#endif /* CAD_DEBUG_TRACE */ + } +#endif /* _TRACE */ + + return _timing; +} +#elif defined(USBPDCORE_LIB_NO_PD) +uint32_t CAD_StateMachine(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + /* Not used in NO_PD lib but should exist for CORE library */ + return CAD_INFINITE_TIME; +} +#endif /* !USBPDCORE_LIB_NO_PD */ + +/** + * @} + */ + +/** @addtogroup USBPD_DEVICE_CAD_HW_IF_Private_Functions + * @{ + */ + +#if !defined(USBPDCORE_LIB_NO_PD) || defined(USBPD_TYPE_STATE_MACHINE) +/** + * @brief Check CCx HW condition + * @param PortNum port + * @retval none + */ +#if defined(_DRP) || defined(_SNK) +void CAD_Check_HW_SNK(uint8_t PortNum) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + /* done to prevent code optimization issue with GCC */ + uint32_t CC1_value, CC2_value; + + /* + ---------------------------------------------------------------------------- + | ANAMODE | ANASUBMODE[1:0] | Notes | TYPEC_VSTATE_CCx[1:0] | + | | | | 00 | 01 | 10 | 11 | + ---------------------------------------------------------------------------- + | 0: Source | 00: Disabled |Disabled N/A | NA | + | | 01: Default USB Rp| |vRaDef|vRdDef|vOPENDef| | + | | 10: 1.5A Rp | |vRa1.5|vRd1.5|vOPEN1.5| NA | + | | 11: 3.0A Rp | |vRa3.0|vRd3.0|vOPEN3.0| NA | + ----------------------------------------------------------------------------- + | 1: Sink | | |xx vRa|vRdUSB| vRd1.5 |vRd3.0| + ----------------------------------------------------------------------------- + */ + +#if defined(_LOW_POWER) || defined(USBPDM1_VCC_FEATURE_ENABLED) + /* Enable type C state machine */ + CLEAR_BIT(Ports[PortNum].husbpd->CR, UCPD_CR_CC1TCDIS | UCPD_CR_CC2TCDIS); + + for(int32_t index=0; index < 200/2; index++){ __DSB();}; + + /* Read the CC line */ + CC1_value = Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1; + CC2_value = Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2; + + /* Disable the C state machine */ + SET_BIT(Ports[PortNum].husbpd->CR, UCPD_CR_CC1TCDIS | UCPD_CR_CC2TCDIS); +#else + CC1_value = Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1; + CC2_value = Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2; +#endif /* _LOW_POWER */ + + _handle->cc = CCNONE; + _handle->CurrentHWcondition = HW_Detachment; + + if ((CC1_value != LL_UCPD_SNK_CC1_VOPEN) && (CC2_value == LL_UCPD_SNK_CC2_VOPEN)) + { + _handle->CurrentHWcondition = HW_Attachment; + _handle->cc = CC1; + Ports[PortNum].params->SNKExposedRP_AtAttach = CC1_value >> UCPD_SR_TYPEC_VSTATE_CC1_Pos; + } + + if ((CC1_value == LL_UCPD_SNK_CC1_VOPEN) && (CC2_value != LL_UCPD_SNK_CC2_VOPEN)) + { + _handle->CurrentHWcondition = HW_Attachment; + _handle->cc = CC2; + Ports[PortNum].params->SNKExposedRP_AtAttach = CC2_value >> UCPD_SR_TYPEC_VSTATE_CC2_Pos;; + } +} +#endif /* _DRP || _SNK */ + +#if defined(_DRP) || defined(_SRC) +void CAD_Check_HW_SRC(uint8_t PortNum) +{ +#if !defined(_RTOS) + uint32_t CC1_value_temp, CC2_value_temp; +#endif /* !_RTOS */ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + /* done to prevent code optimization issue with GCC */ + uint32_t CC1_value, CC2_value; + + /* + ---------------------------------------------------------------------------- + | ANAMODE | ANASUBMODE[1:0] | Notes | TYPEC_VSTATE_CCx[1:0] | + | | | | 00 | 01 | 10 | 11 | + ---------------------------------------------------------------------------- + | 0: Source | 00: Disabled |Disabled N/A | NA | + | | 01: Default USB Rp| |vRaDef|vRdDef|vOPENDef| | + | | 10: 1.5A Rp | |vRa1.5|vRd1.5|vOPEN1.5| NA | + | | 11: 3.0A Rp | |vRa3.0|vRd3.0|vOPEN3.0| NA | + ----------------------------------------------------------------------------- + | 1: Sink | | |xx vRa|vRdUSB| vRd1.5 |vRd3.0| + ----------------------------------------------------------------------------- + */ + +#ifdef _LOW_POWER + /* Enable type C state machine */ + CLEAR_BIT(Ports[PortNum].husbpd->CR, UCPD_CR_CC1TCDIS | UCPD_CR_CC2TCDIS); + + for(int32_t index=0; index < 200/2; index++){ __DSB();}; +#endif /* _LOW_POWER */ + + CC1_value = (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1) >> UCPD_SR_TYPEC_VSTATE_CC1_Pos; + CC2_value = (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2) >> UCPD_SR_TYPEC_VSTATE_CC2_Pos; + +#ifdef _LOW_POWER + /* Disable the C state machine */ + SET_BIT(Ports[PortNum].husbpd->CR, UCPD_CR_CC1TCDIS | UCPD_CR_CC2TCDIS); +#endif /* _LOW_POWER */ + + +#if !defined(_RTOS) + /* Workaround linked to issue with Ellisys test TD.PC.E5 + - it seems that in NRTOS version, we detect a glitch during DRP transition SNK to SRC */ + CC1_value_temp = (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1) >> UCPD_SR_TYPEC_VSTATE_CC1_Pos; + CC2_value_temp = (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2) >> UCPD_SR_TYPEC_VSTATE_CC2_Pos; + if ((CC1_value_temp != CC1_value) || (CC2_value_temp != CC2_value)) + { + return; + } +#endif /* !_RTOS */ + + const CCxPin_TypeDef table_cc[] = { CCNONE, CC2, CC2, + CC1, CCNONE, CC1, + CC1, CC2, CCNONE }; + + const CAD_HW_Condition_TypeDef table_CurrentHWcondition[] = { HW_AudioAdapter_Attachment, HW_PwrCable_Sink_Attachment, HW_PwrCable_NoSink_Attachment, + HW_PwrCable_Sink_Attachment, HW_Debug_Attachment, HW_Attachment, + HW_PwrCable_NoSink_Attachment, HW_Attachment, HW_Detachment }; + if(CC1_value * 3 + CC2_value < 9) + { + _handle->cc = table_cc[CC1_value * 3 + CC2_value]; + _handle->CurrentHWcondition = table_CurrentHWcondition[CC1_value * 3 + CC2_value]; + } +} +#endif /* _DRP || _SRC */ + +#if defined(_DRP) || defined(_SNK) +static uint32_t ManageStateDetached_SNK(uint8_t PortNum) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + CAD_Check_HW_SNK(PortNum); + /* Change the status on the basis of the HW event given by CAD_Check_HW() */ + if (_handle->CurrentHWcondition == HW_Detachment) + { +#if defined(_LOW_POWER) + /* value returned by a SRC or a SINK */ + _timing = CAD_DETACH_POLLING; /* 100ms in the sink cases */ +#elif defined(USBPDM1_VCC_FEATURE_ENABLED) + _timing = CAD_DEFAULT_TIME; +#else + _timing = CAD_INFINITE_TIME; +#endif /* _LOW_POWER */ + +#if defined(_ACCESSORY_SNK) + if((USBPD_TRUE == _handle->CAD_Accessory_SNK) +#if defined(USBPDCORE_VPD) + || (USBPD_TRUE == _handle->CAD_VPD_SNK) +#endif /* USBPDCORE_VPD */ + ) + { + /* A Sink with Accessory support shall transition to Unattached.Accessory within tDRPTransition + after the state of both the CC1 and CC2 pins is SNK.Open for tDRP - dcSRC.DRP · tDRP, or if directed.*/ + if ( (HAL_GetTick() - _handle->CAD_tToggle_start) > CAD_ACCESSORY_TOGGLE) + { + _handle->cstate = USBPD_CAD_STATE_UNATTACHED_ACCESSORY; + _handle->CAD_tToggle_start = HAL_GetTick(); + USBPDM1_AssertRp(PortNum); + } + _timing = CAD_DEFAULT_TIME; + } +#endif /* _SNK && _ACCESSORY */ + } + else + { + /* Get the time of this event */ + _handle->CAD_tDebounce_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_ATTACHED_WAIT; + + /* Temporary patch for test TD.PD 4.5.2 + rework for Patch TP.PD.C.E5 */ + HAL_Delay(1); + CAD_Check_HW_SNK(PortNum); + + if (_handle->CurrentHWcondition == HW_Detachment) + { + _handle->cstate = USBPD_CAD_STATE_DETACHED; + } + else + { + BSP_USBPD_PWR_VBUSInit(PortNum); + } + } + return _timing; +} +#endif /* _SNK */ + +#if defined(_SRC) || defined(_DRP) +static uint32_t ManageStateDetached_SRC(uint8_t PortNum) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + if (_handle->CAD_ResistorUpdateflag == USBPD_TRUE) + { + /* update the reistor value */ + USBPDM1_AssertRp(PortNum); + _handle->CAD_ResistorUpdateflag = USBPD_FALSE; + + /* let time to internal state machine update */ + HAL_Delay(1); + } + + CAD_Check_HW_SRC(PortNum); + /* Change the status on the basis of the HW event given by CAD_Check_HW() */ + if (_handle->CurrentHWcondition == HW_Detachment) + { +#ifdef _LOW_POWER + /* value returned by a SRC or a SINK */ + _timing = CAD_DETACH_POLLING; /* 100ms in the sink cases */ +#else + _timing = CAD_INFINITE_TIME; +#endif /* _LOW_POWER */ + } + else + { + if (_handle->CurrentHWcondition == HW_PwrCable_NoSink_Attachment) + { + _handle->cstate = USBPD_CAD_STATE_EMC; + } + else + { + /* Get the time of this event */ + _handle->CAD_tDebounce_start = HAL_GetTick(); + _handle->cstate = USBPD_CAD_STATE_ATTACHED_WAIT; + + /* Temporary patch for test TD.PD 4.5.2 + rework for Patch TP.PD.C.E5 */ + HAL_Delay(1); + CAD_Check_HW_SRC(PortNum); + + if (_handle->CurrentHWcondition == HW_Detachment) + { + _handle->cstate = USBPD_CAD_STATE_DETACHED; + } + else + { + BSP_USBPD_PWR_VBUSInit(PortNum); + } + /* End */ + } + } + return _timing; +} +#endif /* _SRC || _DRP */ + +#if defined(_DRP) +static uint32_t ManageStateDetached_DRP(uint8_t PortNum) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].params->PE_PowerRole) + { + ManageStateDetached_SRC(PortNum); + } + else + { + ManageStateDetached_SNK(PortNum); + } + + /* Manage the toggle */ + if(_handle->CurrentHWcondition == HW_Detachment) + { + switch (Ports[PortNum].params->PE_PowerRole) + { + case USBPD_PORTPOWERROLE_SRC : + if ((HAL_GetTick() - _handle->CAD_tToggle_start) > Ports[PortNum].settings->CAD_SRCToggleTime) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + Ports[PortNum].params->PE_PowerRole = USBPD_PORTPOWERROLE_SNK; + Ports[PortNum].params->PE_DataRole = USBPD_PORTDATAROLE_UFP; + _timing = Ports[PortNum].settings->CAD_SNKToggleTime; + USBPDM1_AssertRd(PortNum); + } + break; + case USBPD_PORTPOWERROLE_SNK : + if ((HAL_GetTick() - _handle->CAD_tToggle_start) > Ports[PortNum].settings->CAD_SNKToggleTime) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + Ports[PortNum].params->PE_PowerRole = USBPD_PORTPOWERROLE_SRC; + Ports[PortNum].params->PE_DataRole = USBPD_PORTDATAROLE_DFP; + _timing = Ports[PortNum].settings->CAD_SRCToggleTime; + USBPDM1_AssertRp(PortNum); + } + break; + default: + break; + } + } + + return _timing; +} +#endif /* _DRP */ + +#if defined(_DRP) || defined(_SRC) +static uint32_t ManageStateAttachedWait_SRC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = 2; + + /* Evaluate elapsed time in Attach_Wait state */ + uint32_t CAD_tDebounce = HAL_GetTick() - _handle->CAD_tDebounce_start; + CAD_Check_HW_SRC(PortNum); + + if ((_handle->CurrentHWcondition != HW_Detachment) && (_handle->CurrentHWcondition != HW_PwrCable_NoSink_Attachment)) + { + if(USBPD_FALSE == USBPD_PWR_IF_GetVBUSStatus(PortNum,USBPD_PWR_BELOWVSAFE0V)) + { + /* reset the timing because VBUS threshold not yet reach */ + _handle->CAD_tDebounce_start = HAL_GetTick(); + return CAD_TCCDEBOUCE_THRESHOLD; + } + + /* Check tCCDebounce */ + if (CAD_tDebounce > CAD_TCCDEBOUCE_THRESHOLD) + { + switch (_handle->CurrentHWcondition) + { + case HW_Attachment: + HW_SignalAttachement(PortNum, _handle->cc); + _handle->cstate = USBPD_CAD_STATE_ATTACHED; + *pEvent = USBPD_CAD_EVENT_ATTACHED; + *pCCXX = _handle->cc; + break; + + case HW_PwrCable_Sink_Attachment: + HW_SignalAttachement(PortNum, _handle->cc); + _handle->cstate = USBPD_CAD_STATE_ATTEMC; + *pEvent = USBPD_CAD_EVENT_ATTEMC; + break; + + case HW_PwrCable_NoSink_Attachment: + BSP_USBPD_PWR_VBUSDeInit(PortNum); + _handle->cstate = USBPD_CAD_STATE_EMC; + *pEvent = USBPD_CAD_EVENT_EMC; + *pCCXX = _handle->cc; + break; + +#if defined(_ACCESSORY_SRC) + case HW_Debug_Attachment: + _handle->cstate = USBPD_CAD_STATE_DEBUG; + *pEvent = USBPD_CAD_EVENT_DEBUG; + break; + + case HW_AudioAdapter_Attachment: + _handle->cstate = USBPD_CAD_STATE_ACCESSORY; + *pEvent = USBPD_CAD_EVENT_ACCESSORY; + break; +#endif /* _ACCESSORY_SRC */ + + case HW_Detachment: + default: +#if !defined(_ACCESSORY_SRC) + _handle->cstate = USBPD_CAD_STATE_DETACH_SRC; +#endif /* _ACCESSORY_SRC */ + break; + } /* end of switch */ + *pCCXX = _handle->cc; + _timing = 2; + } + /* reset the flag for CAD_tDebounce */ + _handle->CAD_tDebounce_flag = USBPD_FALSE; + } + else /* CAD_HW_Condition[PortNum] = HW_Detachment */ + { + /* start counting of CAD_tDebounce */ + if (USBPD_FALSE == _handle->CAD_tDebounce_flag) + { + _handle->CAD_tDebounce_start = HAL_GetTick(); + _handle->CAD_tDebounce_flag = USBPD_TRUE; + _timing = CAD_TSRCDISCONNECT_THRESHOLD; + } + else /* CAD_tDebounce already running */ + { + /* evaluate CAD_tDebounce */ + CAD_tDebounce = HAL_GetTick() - _handle->CAD_tDebounce_start; + if (CAD_tDebounce > CAD_TSRCDISCONNECT_THRESHOLD) + { + _handle->CAD_tDebounce_flag = USBPD_FALSE; + _handle->cstate = USBPD_CAD_STATE_DETACH_SRC; + _timing = 0; + } + } + } + return _timing; +} +#endif /* _DRP || _SRC || (_ACCESSORY && _SNK) */ + +#if defined(_DRP) || defined(_SRC) +static uint32_t ManageStateEMC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + uint32_t _timing = CAD_INFINITE_TIME; + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + + CAD_Check_HW_SRC(PortNum); + /* Change the status on the basis of the HW event given by CAD_Check_HW() */ + switch (_handle->CurrentHWcondition) + { + case HW_Detachment : + _handle->cstate = USBPD_CAD_STATE_SWITCH_TO_SNK; + _timing = 1; + break; + case HW_PwrCable_Sink_Attachment: + case HW_Attachment : + _handle->cstate = USBPD_CAD_STATE_ATTACHED_WAIT; + _handle->CAD_tDebounce_start = HAL_GetTick() - 5u; /* this is only to check cable presence */ + BSP_USBPD_PWR_VBUSInit(PortNum); + _timing = 2; + break; + case HW_PwrCable_NoSink_Attachment: + default : + /* nothing to do still the same status */ +#if defined(_DRP) + if (USBPD_TRUE == Ports[PortNum].settings->CAD_RoleToggle) + { + if ((HAL_GetTick() - _handle->CAD_tToggle_start) > Ports[PortNum].settings->CAD_SRCToggleTime) + { + _handle->cstate = USBPD_CAD_STATE_SWITCH_TO_SNK; + } + _timing = 0; + } +#endif /* _DRP */ + break; + } + return _timing; +} +#endif /* _DRP || _SRC */ + +#if defined(_DRP) +static uint32_t ManageStateAttached_DRP(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].params->PE_PowerRole) + { + return ManageStateAttached_SRC(PortNum, pEvent, pCCXX); + } + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = ManageStateAttached_SNK(PortNum, pEvent, pCCXX); + + /* Toggle management */ + if (_handle->CurrentHWcondition == HW_Detachment) + { + _handle->cstate = USBPD_CAD_STATE_SWITCH_TO_SRC; + _timing = 0; + } + return _timing; +} +#endif /* _DRP */ + +#if defined(_DRP) || (defined(_ACCESSORY) && defined(_SNK)) +static uint32_t ManageStateAttachedWait_DRP(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + if (USBPD_PORTPOWERROLE_SRC == Ports[PortNum].params->PE_PowerRole) + { + return ManageStateAttachedWait_SRC(PortNum, pEvent, pCCXX); + } + return ManageStateAttachedWait_SNK(PortNum, pEvent, pCCXX); +} +#endif /* _DRP || (_ACCESSORY && _SNK) */ + +#if defined(_SRC) || defined(_DRP) +static uint32_t ManageStateAttached_SRC(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + uint32_t ccx = (Ports[PortNum].CCx == CC1) ? (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1) : (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2); + uint32_t comp = (Ports[PortNum].CCx == CC1) ? LL_UCPD_SRC_CC1_VRD : LL_UCPD_SRC_CC2_VRD; + + /* Check if CC lines is opened or switch to debug accessory */ + if (comp != ccx) + { + /* start counting of CAD_tDebounce */ + if (USBPD_FALSE == _handle->CAD_tDebounce_flag) + { + _handle->CAD_tDebounce_flag = USBPD_TRUE; + _handle->CAD_tDebounce_start = HAL_GetTick(); + _timing = CAD_TSRCDISCONNECT_THRESHOLD; + } + else /* CAD_tDebounce already running */ + { + /* evaluate CAD_tDebounce */ + uint32_t CAD_tDebounce = HAL_GetTick() - _handle->CAD_tDebounce_start; + if (CAD_tDebounce > CAD_TSRCDISCONNECT_THRESHOLD) + { + HW_SignalDetachment(PortNum); +#ifdef _DRP + if (USBPD_TRUE == Ports[PortNum].settings->CAD_RoleToggle) + { + USBPDM1_AssertRd(PortNum); + } +#endif /* _DRP */ + _handle->CAD_tDebounce_flag = USBPD_FALSE; + /* move inside state DETACH to avoid wrong VCONN level*/ + _handle->cstate = USBPD_CAD_STATE_DETACH_SRC; + *pEvent = USBPD_CAD_EVENT_DETACHED; + *pCCXX = CCNONE; + _timing = 0; + } + } + } + else + { + /* Reset tPDDebounce flag*/ + _handle->CAD_tDebounce_flag = USBPD_FALSE; + _timing = CAD_INFINITE_TIME; + } + + return _timing; +} +#endif /* _SRC || _DRP */ + +#if defined(_SNK) || defined(_DRP) +static uint32_t ManageStateAttachedWait_SNK(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + uint32_t CAD_tDebounce = HAL_GetTick() - _handle->CAD_tDebounce_start; + CAD_Check_HW_SNK(PortNum); + if (_handle->CurrentHWcondition == HW_Attachment) + { + if (CAD_tDebounce > CAD_TCCDEBOUCE_THRESHOLD) + { + if (USBPD_TRUE == USBPD_PWR_IF_GetVBUSStatus(PortNum, USBPD_PWR_VSAFE5V)) /* Check if Vbus is on */ + { + HW_SignalAttachement(PortNum, _handle->cc); + _handle->cstate = USBPD_CAD_STATE_ATTACHED; + *pEvent = USBPD_CAD_EVENT_ATTACHED; + *pCCXX = _handle->cc; + } + } + _handle->CAD_tDebounce_flag = USBPD_FALSE; + } + else + { + /* start counting of CAD_tDebounce */ + if (USBPD_FALSE == _handle->CAD_tDebounce_flag) + { + _handle->CAD_tDebounce_start = HAL_GetTick(); + _handle->CAD_tDebounce_flag = USBPD_TRUE; + _timing = CAD_TPDDEBOUCE_THRESHOLD; + } + else /* CAD_tDebounce already running */ + { + /* evaluate CAD_tDebounce */ + if ((HAL_GetTick() - _handle->CAD_tDebounce_start > CAD_TPDDEBOUCE_THRESHOLD)) + { + _handle->CAD_tDebounce_flag = USBPD_FALSE; + _handle->cstate = USBPD_CAD_STATE_DETACHED; + BSP_USBPD_PWR_VBUSDeInit(PortNum); +#if defined(_ACCESSORY_SNK) + if(USBPD_TRUE == _handle->CAD_Accessory_SNK) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + } +#endif /* _ACCESSORY_SNK */ + } + } + } + return _timing; +} + +static uint32_t ManageStateAttached_SNK(uint8_t PortNum, USBPD_CAD_EVENT *pEvent, CCxPin_TypeDef *pCCXX) +{ + CAD_HW_HandleTypeDef *_handle = &CAD_HW_Handles[PortNum]; + uint32_t _timing = CAD_DEFAULT_TIME; + + uint32_t ccx; + uint32_t comp = (Ports[PortNum].CCx == CC1) ? LL_UCPD_SNK_CC1_VOPEN : LL_UCPD_SNK_CC2_VOPEN; + +#if defined(_LOW_POWER) || defined(USBPDM1_VCC_FEATURE_ENABLED) + /* Enable type C state machine */ + CLEAR_BIT(Ports[PortNum].husbpd->CR, UCPD_CR_CC1TCDIS | UCPD_CR_CC2TCDIS); + + for(int32_t index=0; index < 200/2; index++){ __DSB();}; +#endif + + ccx = (Ports[PortNum].CCx == CC1) ? (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1) : (Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2); + if((USBPD_TRUE == USBPD_PWR_IF_GetVBUSStatus(PortNum, USBPD_PWR_SNKDETACH)) /* Check if Vbus is below disconnect threshold */ + && + (comp == ccx) /* confirm that there is no RP */ + ) + { + HW_SignalDetachment(PortNum); + /* restart the toggle time */ + _handle->CurrentHWcondition = HW_Detachment; + _handle->cstate = USBPD_CAD_STATE_DETACHED; +#if defined(_ACCESSORY_SNK) + if(USBPD_TRUE == _handle->CAD_Accessory_SNK) + { + _handle->CAD_tToggle_start = HAL_GetTick(); + } +#endif /* _ACCESSORY_SNK */ + *pEvent = USBPD_CAD_EVENT_DETACHED; + *pCCXX = CCNONE; + _timing = 0; + } + else + { + _timing = CAD_VBUS_POLLING_TIME; + } + + return _timing; +} +#endif /* _SNK || _DRP */ + +#endif /* !USBPDCORE_LIB_NO_PD || USBPD_TYPE_STATE_MACHINE */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw.c new file mode 100644 index 0000000..6f724ef --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw.c @@ -0,0 +1,191 @@ +/** + ****************************************************************************** + * @file usbpd_phy_hw_if.c + * @author MCD Application Team + * @brief This file contains phy interface control functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +#define USBPD_HW_C +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_devices_conf.h" +#include "usbpd_hw.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Variable containing ADC conversions results */ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +UCPD_TypeDef *USBPD_HW_GetUSPDInstance(uint8_t PortNum) +{ +#if defined(UCPD_INSTANCE0) && defined(UCPD_INSTANCE1) + return PortNum == 0u ? UCPD_INSTANCE0 : UCPD_INSTANCE1; +#else + return UCPD_INSTANCE0; +#endif +} + +DMA_Channel_TypeDef *USBPD_HW_Init_DMARxInstance(uint8_t PortNum) +{ + LL_DMA_InitTypeDef DMA_InitStruct; + + /* Initialise the DMA */ + LL_DMA_StructInit(&DMA_InitStruct); + DMA_InitStruct.Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct.Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT; + DMA_InitStruct.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct.NbData = 0; + DMA_InitStruct.MemoryOrM2MDstAddress = 0x0; + DMA_InitStruct.PeriphOrM2MSrcAddress = 0x0; + DMA_InitStruct.Priority = LL_DMA_PRIORITY_HIGH; + + switch (PortNum) + { + case 0 : + /* Enable the clock */ + UCPDDMA_INSTANCE0_CLOCKENABLE_RX; + + /* Initialise the DMA */ + DMA_InitStruct.PeriphRequest = UCPDDMA_INSTANCE0_REQUEST_RX; + + (void)LL_DMA_Init(UCPDDMA_INSTANCE0_DMA_RX, UCPDDMA_INSTANCE0_LL_CHANNEL_RX, &DMA_InitStruct); + break; +#if defined(UCPD_INSTANCE1) + case 1 : + /* Enable the clock */ + UCPDDMA_INSTANCE1_CLOCKENABLE_RX; + + /* Initialise the DMA */ + DMA_InitStruct.PeriphRequest = UCPDDMA_INSTANCE1_REQUEST_RX; + + (void)LL_DMA_Init(UCPDDMA_INSTANCE1_DMA_RX, UCPDDMA_INSTANCE1_LL_CHANNEL_RX, &DMA_InitStruct); + break; +#endif + default: + break; + } + +#if defined(UCPD_INSTANCE1) + return (PortNum == 0u) ? UCPDDMA_INSTANCE0_CHANNEL_RX : UCPDDMA_INSTANCE1_CHANNEL_RX; +#else + return UCPDDMA_INSTANCE0_CHANNEL_RX; +#endif +} + +void USBPD_HW_DeInit_DMARxInstance(uint8_t PortNum) +{ + (void)PortNum; +} + +DMA_Channel_TypeDef *USBPD_HW_Init_DMATxInstance(uint8_t PortNum) +{ + LL_DMA_InitTypeDef DMA_InitStruct; + + /* Initialise the DMA */ + LL_DMA_StructInit(&DMA_InitStruct); + DMA_InitStruct.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH; + DMA_InitStruct.Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT; + DMA_InitStruct.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct.NbData = 0; + DMA_InitStruct.MemoryOrM2MDstAddress = 0x0; + DMA_InitStruct.PeriphOrM2MSrcAddress = 0x0; + + switch (PortNum) + { + case 0 : + /* Enable the clock */ + UCPDDMA_INSTANCE0_CLOCKENABLE_TX; + + DMA_InitStruct.PeriphRequest = UCPDDMA_INSTANCE0_REQUEST_TX; + DMA_InitStruct.Priority = LL_DMA_PRIORITY_MEDIUM; + (void)LL_DMA_Init(UCPDDMA_INSTANCE0_DMA_TX, UCPDDMA_INSTANCE0_LL_CHANNEL_TX, &DMA_InitStruct); + break; +#if defined(UCPD_INSTANCE1) + case 1 : + UCPDDMA_INSTANCE1_CLOCKENABLE_TX; + + DMA_InitStruct.PeriphRequest = UCPDDMA_INSTANCE1_REQUEST_TX; + DMA_InitStruct.Priority = LL_DMA_PRIORITY_MEDIUM; + (void)LL_DMA_Init(UCPDDMA_INSTANCE1_DMA_TX, UCPDDMA_INSTANCE1_LL_CHANNEL_TX, &DMA_InitStruct); + break; +#endif + default: + break; + } + +#if defined(UCPD_INSTANCE1) + return (PortNum == 0u) ? UCPDDMA_INSTANCE0_CHANNEL_TX : UCPDDMA_INSTANCE1_CHANNEL_TX; +#else + return UCPDDMA_INSTANCE0_CHANNEL_TX; +#endif +} + +void USBPD_HW_DeInit_DMATxInstance(uint8_t PortNum) +{ + (void)PortNum; +} + +uint32_t USBPD_HW_GetRpResistorValue(uint8_t PortNum) +{ + (void)PortNum; + return LL_UCPD_RESISTOR_3_0A; +} + +void USBPD_HW_SetFRSSignalling(uint8_t PortNum, uint8_t cc) +{ + switch (PortNum) + { + case 0 : + { + /* Configure the GPIO with the AF corresponding to UCPD */ + if (1u == cc) + { + /* FRS_TX1 PA2 (CC1) */ + UCPDFRS_INSTANCE0_FRSCC1; + } + else + { + /* FRS_TX2 PB0 (CC2) */ + UCPDFRS_INSTANCE0_FRSCC2; + } + break; + } +#if defined(UCPD_INSTANCE1) + case 1 : + { + /* the FRS is not available for the second port */ + if (1u == cc) + { + UCPDFRS_INSTANCE1_FRSCC1; + } + else + { + UCPDFRS_INSTANCE1_FRSCC2; + } + break; + } +#endif + default: + break; + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw_if_it.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw_if_it.c new file mode 100644 index 0000000..13ccd58 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw_if_it.c @@ -0,0 +1,193 @@ +/** + ****************************************************************************** + * @file usbpd_hw_if_it.c + * @author MCD Application Team + * @brief This file contains HW interface interrupt routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_devices_conf.h" +#include "usbpd_core.h" +#include "usbpd_hw_if.h" +#include "usbpd_trace.h" +#if defined(_LOW_POWER) +#include "usbpd_lowpower.h" +#endif + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +void PORTx_IRQHandler(uint8_t PortNum); + +void USBPD_PORT0_IRQHandler(void) +{ + PORTx_IRQHandler(USBPD_PORT_0); +} + +void USBPD_PORT1_IRQHandler(void) +{ + PORTx_IRQHandler(USBPD_PORT_1); +} + +void PORTx_IRQHandler(uint8_t PortNum) +{ + UCPD_TypeDef *hucpd = Ports[PortNum].husbpd; + uint32_t _interrupt = LL_UCPD_ReadReg(hucpd, SR); + static uint8_t ovrflag[2] = {0,0}; + + if ((hucpd->IMR & _interrupt) != 0u) + { + /* TXIS no need to enable it all the transfer are done by DMA */ + if (UCPD_SR_TXMSGDISC == (_interrupt & UCPD_SR_TXMSGDISC)) + { + /* the message has been discarded */ + LL_UCPD_ClearFlag_TxMSGDISC(hucpd); + CLEAR_BIT(Ports[PortNum].hdmatx->CCR, DMA_CCR_EN); + Ports[PortNum].cbs.USBPD_HW_IF_TxCompleted(PortNum, 1); + return; + } + + if (UCPD_SR_TXMSGSENT == (_interrupt & UCPD_SR_TXMSGSENT)) + { + /* Message has been fully transferred */ + LL_UCPD_ClearFlag_TxMSGSENT(hucpd); + CLEAR_BIT(Ports[PortNum].hdmatx->CCR, DMA_CCR_EN); + Ports[PortNum].cbs.USBPD_HW_IF_TxCompleted(PortNum, 0); + +#if defined(_LOW_POWER) + LPM_SetStopMode((LPM_Id_t)(LPM_PE_0 + PortNum), LPM_Enable); +#endif + return; + } + + if (UCPD_SR_TXMSGABT == (_interrupt & UCPD_SR_TXMSGABT)) + { + LL_UCPD_ClearFlag_TxMSGABT(hucpd); + CLEAR_BIT(Ports[PortNum].hdmatx->CCR, DMA_CCR_EN); + Ports[PortNum].cbs.USBPD_HW_IF_TxCompleted(PortNum, 2); + return; + } + + /* TXUND : tx underrun detected */ + if (UCPD_SR_HRSTDISC == (_interrupt & UCPD_SR_HRSTDISC)) + { + LL_UCPD_ClearFlag_TxHRSTDISC(hucpd); + return; + } + + /* TXUND : tx underrun detected */ + if (UCPD_SR_HRSTSENT == (_interrupt & UCPD_SR_HRSTSENT)) + { + /* Mhum, the stack is not expected to get this answer */ + LL_UCPD_ClearFlag_TxHRSTSENT(hucpd); + Ports[PortNum].cbs.USBPD_HW_IF_TX_HardResetCompleted(PortNum, USBPD_SOPTYPE_HARD_RESET); + return; + } + + /* TXUND : tx underrun detected */ + if (UCPD_SR_TXUND == (_interrupt & UCPD_SR_TXUND)) + { + /* nothing to do the port partner check message integrity with CRC so PRL will repeat the sent + can be used for debug purpose */ + LL_UCPD_ClearFlag_TxUND(hucpd); + return; + } + + /* RXNE : not needed the stack only perform transfer by DMA */ + /* RXORDDET: not needed so stack will not enabled this interrupt */ + if (UCPD_SR_RXORDDET == (_interrupt & UCPD_SR_RXORDDET)) + { + LL_UCPD_ClearFlag_RxOrderSet(hucpd); +#if defined(_LOW_POWER) + LPM_SetStopMode((LPM_Id_t)(LPM_PE_0 + PortNum), LPM_Disable); +#endif + return; + } + + /* check RXHRSTDET */ + if (UCPD_SR_RXHRSTDET == (_interrupt & UCPD_SR_RXHRSTDET)) + { + Ports[PortNum].cbs.USBPD_HW_IF_RX_ResetIndication(PortNum, USBPD_SOPTYPE_HARD_RESET); + LL_UCPD_ClearFlag_RxHRST(hucpd); + return; + } + + /* check RXOVR */ + if (UCPD_SR_RXOVR == (_interrupt & UCPD_SR_RXOVR)) + { + /* nothing to do the message will be discarded and the port partner retry the send */ + ovrflag[PortNum] = 1; + LL_UCPD_ClearFlag_RxOvr(hucpd); + return; + } + + /* check RXMSGEND an Rx message has been received */ + if (UCPD_SR_RXMSGEND == (_interrupt & UCPD_SR_RXMSGEND)) + { + /* for DMA mode add a control to check if the number of data received is corresponding with the number of + data receive by USBPD */ + LL_UCPD_ClearFlag_RxMsgEnd(hucpd); + + /* disable DMA */ + CLEAR_BIT(Ports[PortNum].hdmarx->CCR, DMA_CCR_EN); + +#if defined(_LOW_POWER) + LPM_SetStopMode((LPM_Id_t)(LPM_PE_0 + PortNum), LPM_Enable); +#endif + + if (((_interrupt & UCPD_SR_RXERR) == 0u) && (ovrflag[PortNum] == 0u)) + { + /* Rx message has been received without error */ + Ports[PortNum].cbs.USBPD_HW_IF_RX_Completed(PortNum, hucpd->RX_ORDSET & UCPD_RX_ORDSET_RXORDSET); + } + ovrflag[PortNum] = 0; + + /* Ready for next transaction */ + WRITE_REG(Ports[PortNum].hdmarx->CMAR, (uint32_t)Ports[PortNum].ptr_RxBuff); + WRITE_REG(Ports[PortNum].hdmarx->CNDTR, SIZE_MAX_PD_TRANSACTION_UNCHUNK); + + SET_BIT(Ports[PortNum].hdmarx->CCR, DMA_CCR_EN); + return; + } + + /* check TYPECEVT1IE/TYPECEVT1IE || check TYPECEVT2IE/TYPECEVT2IE */ + if ((UCPD_SR_TYPECEVT1 == (_interrupt & UCPD_SR_TYPECEVT1)) || (UCPD_SR_TYPECEVT2 == (_interrupt & UCPD_SR_TYPECEVT2))) + { + /* clear both interrupt */ + LL_UCPD_ClearFlag_TypeCEventCC1(hucpd); + LL_UCPD_ClearFlag_TypeCEventCC2(hucpd); + Ports[PortNum].USBPD_CAD_WakeUp(); + /* Wakeup CAD to check the detection event */ + return; + } + + /* check FRSEVTIE */ + if (UCPD_SR_FRSEVT == (_interrupt & UCPD_SR_FRSEVT)) + { + LL_UCPD_ClearFlag_FRS(hucpd); + if (USBPD_PORTPOWERROLE_SNK == Ports[PortNum].params->PE_PowerRole) + { + /* we shall calculate the FRS timing to confirm the timing */ + Ports[PortNum].cbs.USBPD_HW_IF_TX_FRSReception(PortNum); + } + } + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy.c new file mode 100644 index 0000000..ab740b8 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy.c @@ -0,0 +1,388 @@ +/** + ****************************************************************************** + * @file usbpd_phy.c + * @author MCD Application Team + * @brief This file contains PHY layer functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_def.h" +#include "usbpd_phy.h" +#include "usbpd_hw_if.h" +#include "usbpd_pwr_if.h" + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_DEVICE + * @{ + */ + +/** @addtogroup USBPD_DEVICE_PHY + * @brief This file contains PHY layer functions. + * @details Receive from PRL a message and create a structured packet (according to the USBPD specifications): + * |SOP|DATA:[HEADER|DATAOBJECTS]|CRC|EOP| + * @{ + */ + +/* Private defines -----------------------------------------------------------*/ +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup USBPD_DEVICE_PHY_Private_typedef USBPD DEVICE PHY Private typedef + * @brief Structures and enums internally used by the PHY layer + * @{ + */ + + +/** + * @brief Handle to support the data of the layer + */ +typedef struct +{ + /** + * @brief Reports that a message has been received on a specified port. + * @note Received data are stored inside PortNum->pRxBuffPtr + * function called in the interrupt context + * @param PortNum The handle of the port + * @param Type The type of the message received @ref USBPD_SOPType_TypeDef + * @retval None + */ + void (*USBPD_PHY_MessageReceived)(uint8_t PortNum, USBPD_SOPType_TypeDef Type); + + uint32_t SupportedSOP; /*!USBPD_PHY_TxCompleted; + Ports[PortNum].cbs.USBPD_HW_IF_BistCompleted = pCallbacks->USBPD_PHY_BistCompleted; + Ports[PortNum].cbs.USBPD_HW_IF_RX_ResetIndication = pCallbacks->USBPD_PHY_ResetIndication; + Ports[PortNum].cbs.USBPD_HW_IF_RX_Completed = PHY_Rx_Completed; + Ports[PortNum].cbs.USBPD_HW_IF_TX_HardResetCompleted = pCallbacks->USBPD_PHY_ResetCompleted; + Ports[PortNum].cbs.USBPD_HW_IF_TX_FRSReception = pCallbacks->USBPD_PHY_FastRoleSwapReception; + /* Initialize the hardware for the port */ + Ports[PortNum].ptr_RxBuff = pRxBuffer; + + /* Initialize port related functionalities inside this layer */ + PHY_Ports[PortNum].SupportedSOP = SupportedSOP; + PHY_Ports[PortNum].USBPD_PHY_MessageReceived = pCallbacks->USBPD_PHY_MessageReceived; + + return USBPD_OK; +} + +/** + * @brief this function return the retry counter value in us. + * @note time used to determine when the protocol layer must re-send a message not aknowledge by a goodCRC + * @param PortNum Number of the port. + * @retval retry counter value in us. + */ +uint16_t USBPD_PHY_GetRetryTimerValue(uint8_t PortNum) +{ + (void)PortNum; + return 905u; +} + +/** + * @brief this function return the min time to wait before sending a goodCRC to ack a message (in us). + * @note time used to guarantee the min time of 26us between two PD message. + * @param PortNum Number of the port. + * @retval value in us. + */ +uint16_t USBPD_PHY_GetMinGOODCRCTimerValue(uint8_t PortNum) +{ + return 30u; +} + +/** + * @brief Reset the PHY of a specified port. + * @param PortNum Number of the port. + * @retval None + */ +void USBPD_PHY_Reset(uint8_t PortNum) +{ + (void)PortNum; + /* reset PHY layer */ + /* reset HW_IF layer */ +} + +/** + * @brief Request to send a reset on a port. + * @param PortNum Number of the port + * @param Type Type of reset (hard or cable reset) @ref USBPD_SOPTYPE_HARD_RESET or @ref USBPD_SOPTYPE_CABLE_RESET + * @retval status @ref USBPD_OK + */ +USBPD_StatusTypeDef USBPD_PHY_ResetRequest(uint8_t PortNum, USBPD_SOPType_TypeDef Type) +{ + /* Send the requested reset */ + return USBPD_PHY_SendMessage(PortNum, Type, NULL, 0); +} + +/** + * @brief Send a Message. + * @param PortNum Number of the port + * @param Type Type of the message + * @param pBuffer Pointer to the buffer to be transmitted + * @param Size Size of the buffer (bytes) + * @retval status @ref USBPD_OK + */ +USBPD_StatusTypeDef USBPD_PHY_SendMessage(uint8_t PortNum, USBPD_SOPType_TypeDef Type, uint8_t *pBuffer, uint16_t Size) +{ + /* Trace to track message */ + return USBPD_HW_IF_SendBuffer(PortNum, Type, pBuffer, Size); +} + +/** + * @brief Send BIST pattern. + * @param PortNum Number of the port + * @retval status @ref USBPD_OK + */ +USBPD_StatusTypeDef USBPD_PHY_Send_BIST_Pattern(uint8_t PortNum) +{ + /* Call the low-level function (HW_IF) to accomplish the BIST Carrier Mode Transmission */ + USBPD_HW_IF_Send_BIST_Pattern(PortNum); + return USBPD_OK; +} + +/** + * @brief Request PHY to exit of BIST mode 2 + * @param PortNum port number value + * @param mode SOP BIST MODE 2 + * @retval USBPD status + */ +USBPD_StatusTypeDef USBPD_PHY_ExitTransmit(uint8_t PortNum, USBPD_SOPType_TypeDef mode) +{ + if (USBPD_SOPTYPE_BIST_MODE_2 == mode) + { + USBPD_HW_IF_StopBISTMode2(PortNum); + } + return USBPD_OK; +} + +/** + * @brief Set the SinkTxNg value of the resistor, + * @note used to manage the collision avoidance + * @param PortNum Number of the port + * @retval None + */ +void USBPD_PHY_SetResistor_SinkTxNG(uint8_t PortNum) +{ + USBPD_HW_IF_SetResistor_SinkTxNG(PortNum); +} + +/** + * @brief function to set the SinkTxOK + * @note used to manage the collision avoidance + * @param PortNum Number of the port. + * @retval none. + */ +void USBPD_PHY_SetResistor_SinkTxOK(uint8_t PortNum) +{ + USBPD_HW_IF_SetResistor_SinkTxOK(PortNum); +} + +/** + * @brief function to set the supported SOP + * @param PortNum Number of the port. + * @param SOPSupported List of the supported SOP + * @retval None. + */ +void USBPD_PHY_SOPSupported(uint8_t PortNum, uint32_t SOPSupported) +{ + PHY_Ports[PortNum].SupportedSOP = SOPSupported; +} + +/** + * @brief Check if SinkTxOK is set or not + * @note used to manage the collision avoidance + * @param PortNum Number of the port. + * @retval USBPD_TRUE or USBPD_FALSE + */ +uint8_t USBPD_PHY_IsResistor_SinkTxOk(uint8_t PortNum) +{ + return USBPD_HW_IF_IsResistor_SinkTxOk(PortNum); +} + +/** + * @brief function to generate an FRS signalling + * @param PortNum Number of the port. + * @retval None. + */ +void USBPD_PHY_FastRoleSwapSignalling(uint8_t PortNum) +{ + USBPD_HW_IF_FastRoleSwapSignalling(PortNum); +} + +/** + * @brief function used to enable RX + * @param PortNum Number of the port. + * @retval None + */ +void USBPD_PHY_EnableRX(uint8_t PortNum) +{ + USBPD_HW_IF_EnableRX(PortNum); +} + +/** + * @brief function used to disable RX + * @param PortNum Number of the port. + * @retval None + */ +void USBPD_PHY_DisableRX(uint8_t PortNum) +{ + USBPD_HW_IF_DisableRX(PortNum); +} + +/** + * @} + */ + +/** @addtogroup USBPD_DEVICE_PHY_Private_functions + * @brief PHY internally used functions + * @{ + */ + +/** + * @brief Callback to notify the end of the current reception + * @param PortNum Number of the port. + * @param MsgType SOP Message Type + * @retval None. + */ +void PHY_Rx_Completed(uint8_t PortNum, uint32_t MsgType) +{ + const USBPD_SOPType_TypeDef tab_sop_value[] = { USBPD_SOPTYPE_SOP, USBPD_SOPTYPE_SOP1, USBPD_SOPTYPE_SOP2, + USBPD_SOPTYPE_SOP1_DEBUG, USBPD_SOPTYPE_SOP2_DEBUG, USBPD_SOPTYPE_CABLE_RESET + }; + USBPD_SOPType_TypeDef _msgtype; + + _msgtype = tab_sop_value[MsgType]; + + /* check if the message must be forwarded to usbpd stack */ + switch (_msgtype) + { + case USBPD_SOPTYPE_CABLE_RESET : + if (0x1Eu == (PHY_Ports[PortNum].SupportedSOP & 0x1Eu)) + { + /* nothing to do the message will be discarded and the port partner retry the send */ + Ports[PortNum].cbs.USBPD_HW_IF_RX_ResetIndication(PortNum, USBPD_SOPTYPE_CABLE_RESET); + } + break; + case USBPD_SOPTYPE_SOP : + case USBPD_SOPTYPE_SOP1 : + case USBPD_SOPTYPE_SOP2 : + case USBPD_SOPTYPE_SOP1_DEBUG : + case USBPD_SOPTYPE_SOP2_DEBUG : + if (!((uint8_t)(0x1u << _msgtype) != (PHY_Ports[PortNum].SupportedSOP & (uint8_t)(0x1u << _msgtype)))) + { + PHY_Ports[PortNum].USBPD_PHY_MessageReceived(PortNum, _msgtype); + } +#if defined(DEBUG_NOTFWD) + else + { + typedef union + { + uint16_t d16; + struct + { + uint16_t MessageType :5; /*!< Message Header's message Type */ + uint16_t PortDataRole :1; /*!< Message Header's Port Data Role */ + uint16_t SpecificationRevision :2; /*!< Message Header's Spec Revision */ + uint16_t PortPowerRole_CablePlug:1; /*!< Message Header's Port Power Role/Cable Plug field */ + uint16_t MessageID :3; /*!< Message Header's message ID */ + uint16_t NumberOfDataObjects :3; /*!< Message Header's Number of data object */ + uint16_t Extended :1; /*!< Reserved */ + } + b; + } USBPD_MsgHeader_TypeDef; + + USBPD_MsgHeader_TypeDef header_rx; + header_rx.d16 = LE16(Ports[PortNum].ptr_RxBuff); + USBPD_TRACE_Add( USBPD_TRACE_PHY_NOTFRWD,PortNum, _msgtype, Ports[PortNum].ptr_RxBuff, 2u + (header_rx.b.NumberOfDataObjects * 4u)); + } +#endif + break; + default : + break; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy_hw_if.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy_hw_if.c new file mode 100644 index 0000000..f5b9fe9 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy_hw_if.c @@ -0,0 +1,379 @@ +/** + ****************************************************************************** + * @file usbpd_phy_hw_if.c + * @author MCD Application Team + * @brief This file contains phy interface control functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#define USBPD_PHY_HW_IF_C + +#include "usbpd_devices_conf.h" +#include "usbpd_hw.h" +#include "usbpd_core.h" +#include "usbpd_hw_if.h" +#if !defined(USBPDCORE_LIB_NO_PD) +#include "usbpd_timersserver.h" +#endif /* !USBPDCORE_LIB_NO_PD */ +#if defined(_LOW_POWER) +#include "usbpd_lowpower.h" +#endif + +/* Private typedef -----------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ +USBPD_PORT_HandleTypeDef Ports[USBPD_PORT_COUNT]; + + +/* Private functions ---------------------------------------------------------*/ + + +void USBPD_HW_IF_GlobalHwInit(void) +{ + /* PWR register access (for disabling dead battery feature) */ + LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR); + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_CRC); +} + +#if !defined(USBPDCORE_LIB_NO_PD) +void USBPD_HW_IF_StopBISTMode2(uint8_t PortNum) +{ + uint32_t _cr = READ_REG(Ports[PortNum].husbpd->CR) & ~(UCPD_CR_TXMODE | UCPD_CR_TXSEND); + + LL_UCPD_Disable(Ports[PortNum].husbpd); + LL_UCPD_Enable(Ports[PortNum].husbpd); + + Ports[PortNum].husbpd->CR = _cr; +} + +USBPD_StatusTypeDef USBPD_HW_IF_SendBuffer(uint8_t PortNum, USBPD_SOPType_TypeDef Type, uint8_t *pBuffer, uint32_t Size) +{ + USBPD_StatusTypeDef _status = USBPD_OK; + + if (USBPD_SOPTYPE_HARD_RESET == Type) + { + LL_UCPD_SendHardReset(Ports[PortNum].husbpd); + } + else + { + switch (Type) + { + case USBPD_SOPTYPE_SOP : + { + LL_UCPD_WriteTxOrderSet(Ports[PortNum].husbpd, LL_UCPD_ORDERED_SET_SOP); + LL_UCPD_SetTxMode(Ports[PortNum].husbpd, LL_UCPD_TXMODE_NORMAL); + break; + } + case USBPD_SOPTYPE_SOP1 : + { + LL_UCPD_WriteTxOrderSet(Ports[PortNum].husbpd, LL_UCPD_ORDERED_SET_SOP1); + LL_UCPD_SetTxMode(Ports[PortNum].husbpd, LL_UCPD_TXMODE_NORMAL); + break; + } + case USBPD_SOPTYPE_SOP2 : + { + LL_UCPD_WriteTxOrderSet(Ports[PortNum].husbpd, LL_UCPD_ORDERED_SET_SOP2); + LL_UCPD_SetTxMode(Ports[PortNum].husbpd, LL_UCPD_TXMODE_NORMAL); + break; + } + case USBPD_SOPTYPE_CABLE_RESET : + { + LL_UCPD_SetTxMode(Ports[PortNum].husbpd, LL_UCPD_TXMODE_CABLE_RESET); + break; + } + case USBPD_SOPTYPE_BIST_MODE_2 : + { + LL_UCPD_SetTxMode(Ports[PortNum].husbpd, LL_UCPD_TXMODE_BIST_CARRIER2); + break; + } + default : + _status = USBPD_ERROR; + break; + } + + if (USBPD_OK == _status) + { +#if defined(_LOW_POWER) + LPM_SetStopMode((LPM_Id_t)(LPM_PE_0 + PortNum), LPM_Disable); +#endif + WRITE_REG(Ports[PortNum].hdmatx->CMAR, (uint32_t)pBuffer); + WRITE_REG(Ports[PortNum].hdmatx->CNDTR, Size); + Ports[PortNum].hdmatx->CCR |= DMA_CCR_EN; + + LL_UCPD_WriteTxPaySize(Ports[PortNum].husbpd, Size); + LL_UCPD_SendMessage(Ports[PortNum].husbpd); + } + } + return _status; +} + +void USBPD_HW_IF_Send_BIST_Pattern(uint8_t PortNum) +{ + LL_UCPD_SetTxMode(Ports[PortNum].husbpd, LL_UCPD_TXMODE_BIST_CARRIER2); + LL_UCPD_SendMessage(Ports[PortNum].husbpd); +} +#endif /* !USBPDCORE_LIB_NO_PD */ + +void USBPDM1_AssertRp(uint8_t PortNum) +{ + LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG); + switch (Ports[PortNum].params->RpResistor) + { + case vRp_Default : + LL_UCPD_SetRpResistor(Ports[PortNum].husbpd, LL_UCPD_RESISTOR_DEFAULT); + break; + case vRp_1_5A: + LL_UCPD_SetRpResistor(Ports[PortNum].husbpd, LL_UCPD_RESISTOR_1_5A); + break; + case vRp_3_0A: + LL_UCPD_SetRpResistor(Ports[PortNum].husbpd, LL_UCPD_RESISTOR_3_0A); + break; + default: + break; + } + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_NONE); + LL_UCPD_SetSRCRole(Ports[PortNum].husbpd); + if (CCNONE == Ports[PortNum].CCx) + { + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_CC1CC2); + } + else + { + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, (Ports[PortNum].CCx == CC1) ? LL_UCPD_CCENABLE_CC1 : LL_UCPD_CCENABLE_CC2); + } + SET_BIT(SYSCFG->CFGR1, (Ports[PortNum].husbpd == UCPD1) ? SYSCFG_CFGR1_UCPD1_STROBE : SYSCFG_CFGR1_UCPD2_STROBE); +} + +void USBPDM1_DeAssertRp(uint8_t PortNum) +{ + /* not needed on STM32G0xx, so nothing to do, keep only for compatibility */ + UNUSED(PortNum); +} + +void USBPDM1_AssertRd(uint8_t PortNum) +{ + LL_UCPD_TypeCDetectionCC2Disable(Ports[PortNum].husbpd); + LL_UCPD_TypeCDetectionCC1Disable(Ports[PortNum].husbpd); + + LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG); + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_NONE); + LL_UCPD_SetSNKRole(Ports[PortNum].husbpd); + if (CCNONE == Ports[PortNum].CCx) + { + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_CC1CC2); + } + else + { + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, (Ports[PortNum].CCx == CC1) ? LL_UCPD_CCENABLE_CC1 : LL_UCPD_CCENABLE_CC2); + } + + SET_BIT(SYSCFG->CFGR1, (Ports[PortNum].husbpd == UCPD1) ? SYSCFG_CFGR1_UCPD1_STROBE : SYSCFG_CFGR1_UCPD2_STROBE); + HAL_Delay(1); + +#ifndef _LOW_POWER + LL_UCPD_TypeCDetectionCC2Enable(Ports[PortNum].husbpd); + LL_UCPD_TypeCDetectionCC1Enable(Ports[PortNum].husbpd); +#endif +} + +void USBPDM1_DeAssertRd(uint8_t PortNum) +{ + /* not needed on STM32G0xx, so nothing to do, keep only for compatibility */ + UNUSED(PortNum); +} + +void USBPDM1_EnterErrorRecovery(uint8_t PortNum) +{ + LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG); + LL_UCPD_SetSRCRole(Ports[PortNum].husbpd); + LL_UCPD_SetRpResistor(Ports[PortNum].husbpd, LL_UCPD_RESISTOR_NONE); + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_NONE); + SET_BIT(SYSCFG->CFGR1, (Ports[PortNum].husbpd == UCPD1) ? SYSCFG_CFGR1_UCPD1_STROBE : SYSCFG_CFGR1_UCPD2_STROBE); + LL_UCPD_RxDisable(Ports[PortNum].husbpd); +} + +void USBPDM1_Set_CC(uint8_t PortNum, CCxPin_TypeDef cc) +{ + /* Set the correct pin on the comparator*/ + Ports[PortNum].CCx = cc; + LL_UCPD_SetCCPin(Ports[PortNum].husbpd , (cc == CC1) ? LL_UCPD_CCPIN_CC1 : LL_UCPD_CCPIN_CC2); +} + +void USBPDM1_RX_EnableInterrupt(uint8_t PortNum) +{ + /* Enable the RX interrupt process */ + MODIFY_REG(Ports[PortNum].husbpd->IMR, UCPD_IMR_RXORDDETIE | UCPD_IMR_RXHRSTDETIE | UCPD_IMR_RXOVRIE | UCPD_IMR_RXMSGENDIE, + UCPD_IMR_RXORDDETIE | UCPD_IMR_RXHRSTDETIE | UCPD_IMR_RXOVRIE | UCPD_IMR_RXMSGENDIE); + LL_UCPD_RxDMAEnable(Ports[PortNum].husbpd); +} + +void USBPD_HW_IF_EnableRX(uint8_t PortNum) +{ + LL_UCPD_RxEnable(Ports[PortNum].husbpd); +} + +void USBPD_HW_IF_DisableRX(uint8_t PortNum) +{ + LL_UCPD_RxDisable(Ports[PortNum].husbpd); +} + +void HW_SignalAttachement(uint8_t PortNum, CCxPin_TypeDef cc) +{ +#if !defined(USBPDCORE_LIB_NO_PD) + uint32_t _temp; + + /* Init timer to detect the reception of goodCRC */ + USBPD_TIM_Init(); + + /* Prepare ucpd to handle PD message + RX message start listen + TX prepare the DMA to be transfer ready + Detection listen only the line corresponding CC=Rd for SRC/SNK */ + Ports[PortNum].hdmatx = USBPD_HW_Init_DMATxInstance(PortNum); + Ports[PortNum].hdmarx = USBPD_HW_Init_DMARxInstance(PortNum); + + /* Set the RX dma to allow reception */ + _temp = (uint32_t)&Ports[PortNum].husbpd->RXDR; + WRITE_REG(Ports[PortNum].hdmarx->CPAR, _temp); + WRITE_REG(Ports[PortNum].hdmarx->CMAR, (uint32_t)Ports[PortNum].ptr_RxBuff); + Ports[PortNum].hdmarx->CNDTR = SIZE_MAX_PD_TRANSACTION_UNCHUNK; + Ports[PortNum].hdmarx->CCR |= DMA_CCR_EN; + + /* Set the TX dma only UCPD address */ + _temp = (uint32_t)&Ports[PortNum].husbpd->TXDR; + Ports[PortNum].hdmatx->CPAR = _temp; + + /* disabled non Rd line set CC line enable */ +#define INTERRUPT_MASK UCPD_IMR_TXMSGDISCIE | UCPD_IMR_TXMSGSENTIE | UCPD_IMR_HRSTDISCIE | UCPD_IMR_HRSTSENTIE | UCPD_IMR_TXMSGABTIE |\ + UCPD_IMR_TXUNDIE | UCPD_IMR_RXORDDETIE | UCPD_IMR_RXHRSTDETIE | UCPD_IMR_RXOVRIE | UCPD_IMR_RXMSGENDIE + + MODIFY_REG(Ports[PortNum].husbpd->IMR, INTERRUPT_MASK, INTERRUPT_MASK); +#endif /* !USBPDCORE_LIB_NO_PD */ + +#if !defined(USBPDCORE_LIB_NO_PD)||defined(USBPD_TYPE_STATE_MACHINE) + /* Handle CC enable */ + Ports[PortNum].CCx = cc; +#endif /* !USBPDCORE_LIB_NO_PD || USBPD_TYPE_STATE_MACHINE */ + +#if !defined(USBPDCORE_LIB_NO_PD) + /* Set CC pin for PD message */ + LL_UCPD_SetCCPin(Ports[PortNum].husbpd, (Ports[PortNum].CCx == CC1) ? LL_UCPD_CCPIN_CC1 : LL_UCPD_CCPIN_CC2); + + +#if defined(_VCONN_SUPPORT) + /* Initialize Vconn management */ + (void)BSP_USBPD_PWR_VCONNInit(PortNum, (Ports[PortNum].CCx == CC1) ? 1u : 2u); +#endif /* _VCONN_SUPPORT */ + +#if defined(USBPD_REV30_SUPPORT) + if (Ports[PortNum].settings->PE_PD3_Support.d.PE_FastRoleSwapSupport == USBPD_TRUE) + { + /* Set GPIO to allow the FRSTX handling */ + USBPD_HW_SetFRSSignalling(PortNum, (Ports[PortNum].CCx == CC1) ? 1u : 2u); + LL_UCPD_FRSDetectionEnable(Ports[PortNum].husbpd); + Ports[PortNum].husbpd->IMR |= UCPD_IMR_FRSEVTIE; + } +#endif /* USBPD_REV30_SUPPORT */ + + /* Disable the Resistor on Vconn PIN */ + (Ports[PortNum].CCx == CC1) ? LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_CC1) : LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_CC2); + + /* Prepare the rx processing */ + LL_UCPD_SetRxMode(Ports[PortNum].husbpd, LL_UCPD_RXMODE_NORMAL); + LL_UCPD_RxDMAEnable(Ports[PortNum].husbpd); + LL_UCPD_TxDMAEnable(Ports[PortNum].husbpd); +#endif /* !USBPDCORE_LIB_NO_PD */ +} + + +void HW_SignalDetachment(uint8_t PortNum) +{ +#if !defined(USBPDCORE_LIB_NO_PD) + /* stop DMA RX/TX */ + LL_UCPD_RxDMADisable(Ports[PortNum].husbpd); + LL_UCPD_TxDMADisable(Ports[PortNum].husbpd); + LL_UCPD_RxDisable(Ports[PortNum].husbpd); + +#if !defined(_LOW_POWER) && !defined(USBPDM1_VCC_FEATURE_ENABLED) + /* Enable only detection interrupt */ + WRITE_REG(Ports[PortNum].husbpd->IMR, UCPD_IMR_TYPECEVT1IE | UCPD_IMR_TYPECEVT2IE); +#endif /* !_LOW_POWER && !USBPDM1_VCC_FEATURE_ENABLED */ + + USBPD_HW_DeInit_DMATxInstance(PortNum); + USBPD_HW_DeInit_DMARxInstance(PortNum); + + LL_UCPD_SetccEnable(Ports[PortNum].husbpd, LL_UCPD_CCENABLE_CC1CC2); + + if (USBPD_PORTPOWERROLE_SNK == Ports[PortNum].params->PE_PowerRole) + { +#if defined(_VCONN_SUPPORT) + /* DeInitialize Vconn management */ + (void)BSP_USBPD_PWR_VCONNDeInit(PortNum, (Ports[PortNum].CCx == CC1) ? 1u : 2u); +#endif + /* DeInitialise VBUS power */ + (void)BSP_USBPD_PWR_VBUSDeInit(PortNum); + } +#endif /* !USBPDCORE_LIB_NO_PD */ +#if !defined(USBPDCORE_LIB_NO_PD)||defined(USBPD_TYPE_STATE_MACHINE) + Ports[PortNum].CCx = CCNONE; +#endif /* !USBPDCORE_LIB_NO_PD || USBPD_TYPE_STATE_MACHINE */ +#if !defined(USBPDCORE_LIB_NO_PD) + /* DeInit timer to detect the reception of goodCRC */ + USBPD_TIM_DeInit(); +#endif /* !USBPDCORE_LIB_NO_PD */ +} + +void USBPD_HW_IF_SetResistor_SinkTxNG(uint8_t PortNum) +{ + /* set the resistor SinkTxNG 1.5A5V */ + LL_UCPD_SetRpResistor(Ports[PortNum].husbpd, LL_UCPD_RESISTOR_1_5A); +} + +void USBPD_HW_IF_SetResistor_SinkTxOK(uint8_t PortNum) +{ + /* set the resistor SinkTxNG 3.0A5V */ + LL_UCPD_SetRpResistor(Ports[PortNum].husbpd, LL_UCPD_RESISTOR_3_0A); +} + +uint8_t USBPD_HW_IF_IsResistor_SinkTxOk(uint8_t PortNum) +{ + switch (Ports[PortNum].CCx) + { + case CC1 : + if((Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC1) == LL_UCPD_SNK_CC1_VRP30A) + { + return USBPD_TRUE; + } + break; + case CC2 : + if((Ports[PortNum].husbpd->SR & UCPD_SR_TYPEC_VSTATE_CC2) == LL_UCPD_SNK_CC2_VRP30A) + { + return USBPD_TRUE; + } + break; + default: + break; + } + + return USBPD_FALSE; +} + +void USBPD_HW_IF_FastRoleSwapSignalling(uint8_t PortNum) +{ + LL_UCPD_SignalFRSTX(Ports[PortNum].husbpd); +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_pwr_hw_if.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_pwr_hw_if.c new file mode 100644 index 0000000..cd235df --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_pwr_hw_if.c @@ -0,0 +1,107 @@ +/** + ****************************************************************************** + * @file usbpd_pwr_hw_if.c + * @author MCD Application Team + * @brief This file contains power hardware interface functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_hw_if.h" + + +#define _USBPD_POWER_DEBUG +#if defined(_TRACE) +#include "usbpd_core.h" +#include "usbpd_trace.h" +#endif + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(_TRACE) +#define POWER_DEBUG(__MSG__,__SIZE__) USBPD_TRACE_Add(USBPD_TRACE_DEBUG, PortNum, 0,__MSG__,__SIZE__); +#else +#define POWER_DEBUG(__MSG__,__SIZE__) +#endif + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +USBPD_StatusTypeDef HW_IF_PWR_SetVoltage(uint8_t PortNum, uint16_t voltage) +{ + UNUSED(PortNum); + UNUSED(voltage); + return USBPD_OK; +} + +uint16_t HW_IF_PWR_GetVoltage(uint8_t PortNum) +{ + uint32_t _voltage; + BSP_USBPD_PWR_VBUSGetVoltage(PortNum, &_voltage); + return (uint16_t)_voltage; +} + +int16_t HW_IF_PWR_GetCurrent(uint8_t PortNum) +{ + int32_t _current; + BSP_USBPD_PWR_VBUSGetCurrent(PortNum, &_current); + return (int16_t)_current; +} + +#if defined(_SRC) || defined(_DRP) +USBPD_StatusTypeDef HW_IF_PWR_Enable(uint8_t PortNum, USBPD_FunctionalState state, CCxPin_TypeDef Cc, uint32_t VconnState, USBPD_PortPowerRole_TypeDef role) +{ + UNUSED(role); + int32_t status; + if (USBPD_ENABLE == state) + { +#if defined(_VCONN_SUPPORT) + if (USBPD_TRUE == VconnState) + { + POWER_DEBUG((uint8_t *)"VCONN ON", 8); + (void)BSP_USBPD_PWR_VCONNOn(PortNum, Cc); + } +#endif /* _VCONN_SUPPORT */ + POWER_DEBUG((uint8_t *)"VBUS ON", 7); + status = BSP_USBPD_PWR_VBUSOn(PortNum); + } + else + { +#if defined(_VCONN_SUPPORT) + if (VconnState == USBPD_TRUE) + { + POWER_DEBUG((uint8_t *)"VCONN OFF", 9); + (void)BSP_USBPD_PWR_VCONNOff(PortNum, Cc); + } +#endif /* _VCONN_SUPPORT */ + POWER_DEBUG((uint8_t *)"VBUS OFF", 8); + status = BSP_USBPD_PWR_VBUSOff(PortNum); + } + return (status == BSP_ERROR_NONE) ? USBPD_OK : USBPD_FAIL; +} +#endif /* _SRC || _DRP */ + +USBPD_FunctionalState HW_IF_PWR_VBUSIsEnabled(uint8_t PortNum) +{ +#if defined(_SRC)||defined(_DRP) + uint8_t _state; + BSP_USBPD_PWR_VBUSIsOn(PortNum, &_state); + return (_state == BSP_ERROR_NONE) ? USBPD_DISABLE : USBPD_ENABLE; +#else + return USBPD_DISABLE; +#endif /* _SRC || _DRP */ +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_timersserver.c b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_timersserver.c new file mode 100644 index 0000000..0c9e845 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_timersserver.c @@ -0,0 +1,170 @@ +/** + ****************************************************************************** + * @file usbpd_timersserver.c + * @author MCD Application Team + * @brief This file contains timer server functions. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbpd_devices_conf.h" +#include "usbpd_timersserver.h" + +/** @addtogroup STM32_USBPD_LIBRARY + * @{ + */ + +/** @addtogroup USBPD_DEVICE + * @{ + */ + +/** @addtogroup USBPD_DEVICE_TIMESERVER + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +int8_t timer_initcounter = 0; +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief Initialize a timer to manage timing in us + * @retval None + */ +void USBPD_TIM_Init(void) +{ + if (0 == timer_initcounter) + { + TIMX_CLK_ENABLE; + /***************************/ + /* Time base configuration */ + /***************************/ + /* Counter mode: select up-counting mode */ + LL_TIM_SetCounterMode(TIMX, LL_TIM_COUNTERMODE_UP); + + /* Set the pre-scaler value to have TIMx counter clock equal to 1 MHz */ + LL_TIM_SetPrescaler(TIMX, __LL_TIM_CALC_PSC(SystemCoreClock, 1000000u)); + + /* Set the auto-reload value to have a counter frequency of 100Hz */ + LL_TIM_SetAutoReload(TIMX, __LL_TIM_CALC_ARR(SystemCoreClock, LL_TIM_GetPrescaler(TIMX), 100u)); + + /*********************************/ + /* Output waveform configuration */ + /*********************************/ + /* Set output compare mode: TOGGLE */ + LL_TIM_OC_SetMode(TIMX, TIMX_CHANNEL_CH1, LL_TIM_OCMODE_TOGGLE); + LL_TIM_OC_SetMode(TIMX, TIMX_CHANNEL_CH2, LL_TIM_OCMODE_TOGGLE); + LL_TIM_OC_SetMode(TIMX, TIMX_CHANNEL_CH3, LL_TIM_OCMODE_TOGGLE); + LL_TIM_OC_SetMode(TIMX, TIMX_CHANNEL_CH4, LL_TIM_OCMODE_TOGGLE); + + /* Set output channel polarity: OC is active high */ + LL_TIM_OC_SetPolarity(TIMX, TIMX_CHANNEL_CH1, LL_TIM_OCPOLARITY_HIGH); + LL_TIM_OC_SetPolarity(TIMX, TIMX_CHANNEL_CH2, LL_TIM_OCPOLARITY_HIGH); + LL_TIM_OC_SetPolarity(TIMX, TIMX_CHANNEL_CH3, LL_TIM_OCPOLARITY_HIGH); + LL_TIM_OC_SetPolarity(TIMX, TIMX_CHANNEL_CH4, LL_TIM_OCPOLARITY_HIGH); + + /* Enable counter */ + LL_TIM_EnableCounter(TIMX); + } + + /* Enable the timer counter */ + timer_initcounter++; +} + +/** + * @brief UnInitialize a timer to manage timing in us + * @retval None + */ +void USBPD_TIM_DeInit(void) +{ + timer_initcounter--; + if(0 == timer_initcounter) + { + TIMX_CLK_DISABLE; + } +} + +/** + * @brief start the timer counting + * @param timer id @TIM_identifier + * @param time in us + * @retval None + */ +void USBPD_TIM_Start(TIM_identifier Id, uint32_t TimeUs) +{ + /* Positionne l'evenement pour sa detection */ + switch (Id) + { + case TIM_PORT0_CRC: + TIMX_CHANNEL1_SETEVENT; + break; + case TIM_PORT0_RETRY: + TIMX_CHANNEL2_SETEVENT; + break; + case TIM_PORT1_CRC: + TIMX_CHANNEL3_SETEVENT; + break; + case TIM_PORT1_RETRY: + TIMX_CHANNEL4_SETEVENT; + break; + default: + break; + } +} + +/** + * @brief check timer expiration + * @param timer id @TIM_identifier + * @retval None + */ +uint32_t USBPD_TIM_IsExpired(TIM_identifier Id) +{ + uint32_t _expired = 1u; + switch (Id) + { + case TIM_PORT0_CRC: + _expired = TIMX_CHANNEL1_GETFLAG(TIMX); + break; + case TIM_PORT0_RETRY: + _expired = TIMX_CHANNEL2_GETFLAG(TIMX); + break; + case TIM_PORT1_CRC: + _expired = TIMX_CHANNEL3_GETFLAG(TIMX); + break; + case TIM_PORT1_RETRY: + _expired = TIMX_CHANNEL4_GETFLAG(TIMX); + break; + default: + break; + } + return _expired; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c new file mode 100644 index 0000000..0900213 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c @@ -0,0 +1,1727 @@ +/* ---------------------------------------------------------------------- + * $Date: 5. February 2013 + * $Revision: V1.02 + * + * Project: CMSIS-RTOS API + * Title: cmsis_os.c + * + * Version 0.02 + * Initial Proposal Phase + * Version 0.03 + * osKernelStart added, optional feature: main started as thread + * osSemaphores have standard behavior + * osTimerCreate does not start the timer, added osTimerStart + * osThreadPass is renamed to osThreadYield + * Version 1.01 + * Support for C++ interface + * - const attribute removed from the osXxxxDef_t typedef's + * - const attribute added to the osXxxxDef macros + * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete + * Added: osKernelInitialize + * Version 1.02 + * Control functions for short timeouts in microsecond resolution: + * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec + * Removed: osSignalGet + * + * + *---------------------------------------------------------------------------- + * + * Portions Copyright © 2016 STMicroelectronics International N.V. All rights reserved. + * Portions Copyright (c) 2013 ARM LIMITED + * All rights reserved. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * - Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + *---------------------------------------------------------------------------*/ + +#include +#include "cmsis_os.h" + +/* + * ARM Compiler 4/5 + */ +#if defined ( __CC_ARM ) + + #define __ASM __asm + #define __INLINE __inline + #define __STATIC_INLINE static __inline + + #include "cmsis_armcc.h" + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + + #include +#endif + +extern void xPortSysTickHandler(void); + +/* Convert from CMSIS type osPriority to FreeRTOS priority number */ +static unsigned portBASE_TYPE makeFreeRtosPriority (osPriority priority) +{ + unsigned portBASE_TYPE fpriority = tskIDLE_PRIORITY; + + if (priority != osPriorityError) { + fpriority += (priority - osPriorityIdle); + } + + return fpriority; +} + +#if (INCLUDE_uxTaskPriorityGet == 1) +/* Convert from FreeRTOS priority number to CMSIS type osPriority */ +static osPriority makeCmsisPriority (unsigned portBASE_TYPE fpriority) +{ + osPriority priority = osPriorityError; + + if ((fpriority - tskIDLE_PRIORITY) <= (osPriorityRealtime - osPriorityIdle)) { + priority = (osPriority)((int)osPriorityIdle + (int)(fpriority - tskIDLE_PRIORITY)); + } + + return priority; +} +#endif + + +/* Determine whether we are in thread mode or handler mode. */ +static int inHandlerMode (void) +{ + return __get_IPSR() != 0; +} + +/*********************** Kernel Control Functions *****************************/ +/** +* @brief Initialize the RTOS Kernel for creating objects. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS. +*/ +osStatus osKernelInitialize (void); + +/** +* @brief Start the RTOS Kernel with executing the specified thread. +* @param thread_def thread definition referenced with \ref osThread. +* @param argument pointer that is passed to the thread function as start argument. +* @retval status code that indicates the execution status of the function +* @note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS. +*/ +osStatus osKernelStart (void) +{ + vTaskStartScheduler(); + + return osOK; +} + +/** +* @brief Check if the RTOS kernel is already started +* @param None +* @retval (0) RTOS is not started +* (1) RTOS is started +* (-1) if this feature is disabled in FreeRTOSConfig.h +* @note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS. +*/ +int32_t osKernelRunning(void) +{ +#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) + if (xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED) + return 0; + else + return 1; +#else + return (-1); +#endif +} + +#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available +/** +* @brief Get the value of the Kernel SysTick timer +* @param None +* @retval None +* @note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS. +*/ +uint32_t osKernelSysTick(void) +{ + if (inHandlerMode()) { + return xTaskGetTickCountFromISR(); + } + else { + return xTaskGetTickCount(); + } +} +#endif // System Timer available +/*********************** Thread Management *****************************/ +/** +* @brief Create a thread and add it to Active Threads and set it to state READY. +* @param thread_def thread definition referenced with \ref osThread. +* @param argument pointer that is passed to the thread function as start argument. +* @retval thread ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS. +*/ +osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument) +{ + TaskHandle_t handle; + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + if((thread_def->buffer != NULL) && (thread_def->controlblock != NULL)) { + handle = xTaskCreateStatic((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, + thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), + thread_def->buffer, thread_def->controlblock); + } + else { + if (xTaskCreate((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, + thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), + &handle) != pdPASS) { + return NULL; + } + } +#elif( configSUPPORT_STATIC_ALLOCATION == 1 ) + + handle = xTaskCreateStatic((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, + thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), + thread_def->buffer, thread_def->controlblock); +#else + if (xTaskCreate((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, + thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), + &handle) != pdPASS) { + return NULL; + } +#endif + + return handle; +} + +/** +* @brief Return the thread ID of the current running thread. +* @retval thread ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS. +*/ +osThreadId osThreadGetId (void) +{ +#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) ) + return xTaskGetCurrentTaskHandle(); +#else + return NULL; +#endif +} + +/** +* @brief Terminate execution of a thread and remove it from Active Threads. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS. +*/ +osStatus osThreadTerminate (osThreadId thread_id) +{ +#if (INCLUDE_vTaskDelete == 1) + vTaskDelete(thread_id); + return osOK; +#else + return osErrorOS; +#endif +} + +/** +* @brief Pass control to next thread that is in state \b READY. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS. +*/ +osStatus osThreadYield (void) +{ + taskYIELD(); + + return osOK; +} + +/** +* @brief Change priority of an active thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @param priority new priority value for the thread function. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS. +*/ +osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority) +{ +#if (INCLUDE_vTaskPrioritySet == 1) + vTaskPrioritySet(thread_id, makeFreeRtosPriority(priority)); + return osOK; +#else + return osErrorOS; +#endif +} + +/** +* @brief Get current priority of an active thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval current priority value of the thread function. +* @note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS. +*/ +osPriority osThreadGetPriority (osThreadId thread_id) +{ +#if (INCLUDE_uxTaskPriorityGet == 1) + if (inHandlerMode()) + { + return makeCmsisPriority(uxTaskPriorityGetFromISR(thread_id)); + } + else + { + return makeCmsisPriority(uxTaskPriorityGet(thread_id)); + } +#else + return osPriorityError; +#endif +} + +/*********************** Generic Wait Functions *******************************/ +/** +* @brief Wait for Timeout (Time Delay) +* @param millisec time delay value +* @retval status code that indicates the execution status of the function. +*/ +osStatus osDelay (uint32_t millisec) +{ +#if INCLUDE_vTaskDelay + TickType_t ticks = millisec / portTICK_PERIOD_MS; + + vTaskDelay(ticks ? ticks : 1); /* Minimum delay = 1 tick */ + + return osOK; +#else + (void) millisec; + + return osErrorResource; +#endif +} + +#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) /* Generic Wait available */ +/** +* @brief Wait for Signal, Message, Mail, or Timeout +* @param millisec timeout value or 0 in case of no time-out +* @retval event that contains signal, message, or mail information or error code. +* @note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS. +*/ +osEvent osWait (uint32_t millisec); + +#endif /* Generic Wait available */ + +/*********************** Timer Management Functions ***************************/ +/** +* @brief Create a timer. +* @param timer_def timer object referenced with \ref osTimer. +* @param type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. +* @param argument argument to the timer call back function. +* @retval timer ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS. +*/ +osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument) +{ +#if (configUSE_TIMERS == 1) + +#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + if(timer_def->controlblock != NULL) { + return xTimerCreateStatic((const char *)"", + 1, // period should be filled when starting the Timer using osTimerStart + (type == osTimerPeriodic) ? pdTRUE : pdFALSE, + (void *) argument, + (TimerCallbackFunction_t)timer_def->ptimer, + (StaticTimer_t *)timer_def->controlblock); + } + else { + return xTimerCreate((const char *)"", + 1, // period should be filled when starting the Timer using osTimerStart + (type == osTimerPeriodic) ? pdTRUE : pdFALSE, + (void *) argument, + (TimerCallbackFunction_t)timer_def->ptimer); + } +#elif( configSUPPORT_STATIC_ALLOCATION == 1 ) + return xTimerCreateStatic((const char *)"", + 1, // period should be filled when starting the Timer using osTimerStart + (type == osTimerPeriodic) ? pdTRUE : pdFALSE, + (void *) argument, + (TimerCallbackFunction_t)timer_def->ptimer, + (StaticTimer_t *)timer_def->controlblock); +#else + return xTimerCreate((const char *)"", + 1, // period should be filled when starting the Timer using osTimerStart + (type == osTimerPeriodic) ? pdTRUE : pdFALSE, + (void *) argument, + (TimerCallbackFunction_t)timer_def->ptimer); +#endif + +#else + return NULL; +#endif +} + +/** +* @brief Start or restart a timer. +* @param timer_id timer ID obtained by \ref osTimerCreate. +* @param millisec time delay value of the timer. +* @retval status code that indicates the execution status of the function +* @note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS. +*/ +osStatus osTimerStart (osTimerId timer_id, uint32_t millisec) +{ + osStatus result = osOK; +#if (configUSE_TIMERS == 1) + portBASE_TYPE taskWoken = pdFALSE; + TickType_t ticks = millisec / portTICK_PERIOD_MS; + + if (ticks == 0) + ticks = 1; + + if (inHandlerMode()) + { + if (xTimerChangePeriodFromISR(timer_id, ticks, &taskWoken) != pdPASS) + { + result = osErrorOS; + } + else + { + portEND_SWITCHING_ISR(taskWoken); + } + } + else + { + if (xTimerChangePeriod(timer_id, ticks, 0) != pdPASS) + result = osErrorOS; + } + +#else + result = osErrorOS; +#endif + return result; +} + +/** +* @brief Stop a timer. +* @param timer_id timer ID obtained by \ref osTimerCreate +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS. +*/ +osStatus osTimerStop (osTimerId timer_id) +{ + osStatus result = osOK; +#if (configUSE_TIMERS == 1) + portBASE_TYPE taskWoken = pdFALSE; + + if (inHandlerMode()) { + if (xTimerStopFromISR(timer_id, &taskWoken) != pdPASS) { + return osErrorOS; + } + portEND_SWITCHING_ISR(taskWoken); + } + else { + if (xTimerStop(timer_id, 0) != pdPASS) { + result = osErrorOS; + } + } +#else + result = osErrorOS; +#endif + return result; +} + +/** +* @brief Delete a timer. +* @param timer_id timer ID obtained by \ref osTimerCreate +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS. +*/ +osStatus osTimerDelete (osTimerId timer_id) +{ +osStatus result = osOK; + +#if (configUSE_TIMERS == 1) + + if (inHandlerMode()) { + return osErrorISR; + } + else { + if ((xTimerDelete(timer_id, osWaitForever )) != pdPASS) { + result = osErrorOS; + } + } + +#else + result = osErrorOS; +#endif + + return result; +} + +/*************************** Signal Management ********************************/ +/** +* @brief Set the specified Signal Flags of an active thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @param signals specifies the signal flags of the thread that should be set. +* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. +* @note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS. +*/ +int32_t osSignalSet (osThreadId thread_id, int32_t signal) +{ +#if( configUSE_TASK_NOTIFICATIONS == 1 ) + BaseType_t xHigherPriorityTaskWoken = pdFALSE; + uint32_t ulPreviousNotificationValue = 0; + + if (inHandlerMode()) + { + if(xTaskGenericNotifyFromISR( thread_id , (uint32_t)signal, eSetBits, &ulPreviousNotificationValue, &xHigherPriorityTaskWoken ) != pdPASS ) + return 0x80000000; + + portYIELD_FROM_ISR( xHigherPriorityTaskWoken ); + } + else if(xTaskGenericNotify( thread_id , (uint32_t)signal, eSetBits, &ulPreviousNotificationValue) != pdPASS ) + return 0x80000000; + + return ulPreviousNotificationValue; +#else + (void) thread_id; + (void) signal; + + return 0x80000000; /* Task Notification not supported */ +#endif +} + +/** +* @brief Clear the specified Signal Flags of an active thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @param signals specifies the signal flags of the thread that shall be cleared. +* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. +* @note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS. +*/ +int32_t osSignalClear (osThreadId thread_id, int32_t signal); + +/** +* @brief Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. +* @param signals wait until all specified signal flags set or 0 for any single signal flag. +* @param millisec timeout value or 0 in case of no time-out. +* @retval event flag information or error code. +* @note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS. +*/ +osEvent osSignalWait (int32_t signals, uint32_t millisec) +{ + osEvent ret; + +#if( configUSE_TASK_NOTIFICATIONS == 1 ) + + TickType_t ticks; + + ret.value.signals = 0; + ticks = 0; + if (millisec == osWaitForever) { + ticks = portMAX_DELAY; + } + else if (millisec != 0) { + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) { + ticks = 1; + } + } + + if (inHandlerMode()) + { + ret.status = osErrorISR; /*Not allowed in ISR*/ + } + else + { + if(xTaskNotifyWait( 0,(uint32_t) signals, (uint32_t *)&ret.value.signals, ticks) != pdTRUE) + { + if(ticks == 0) ret.status = osOK; + else ret.status = osEventTimeout; + } + else if(ret.value.signals < 0) + { + ret.status = osErrorValue; + } + else ret.status = osEventSignal; + } +#else + (void) signals; + (void) millisec; + + ret.status = osErrorOS; /* Task Notification not supported */ +#endif + + return ret; +} + +/**************************** Mutex Management ********************************/ +/** +* @brief Create and Initialize a Mutex object +* @param mutex_def mutex definition referenced with \ref osMutex. +* @retval mutex ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS. +*/ +osMutexId osMutexCreate (const osMutexDef_t *mutex_def) +{ +#if ( configUSE_MUTEXES == 1) + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + + if (mutex_def->controlblock != NULL) { + return xSemaphoreCreateMutexStatic( mutex_def->controlblock ); + } + else { + return xSemaphoreCreateMutex(); + } +#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) + return xSemaphoreCreateMutexStatic( mutex_def->controlblock ); +#else + return xSemaphoreCreateMutex(); +#endif +#else + return NULL; +#endif +} + +/** +* @brief Wait until a Mutex becomes available +* @param mutex_id mutex ID obtained by \ref osMutexCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS. +*/ +osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec) +{ + TickType_t ticks; + portBASE_TYPE taskWoken = pdFALSE; + + + if (mutex_id == NULL) { + return osErrorParameter; + } + + ticks = 0; + if (millisec == osWaitForever) { + ticks = portMAX_DELAY; + } + else if (millisec != 0) { + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) { + ticks = 1; + } + } + + if (inHandlerMode()) { + if (xSemaphoreTakeFromISR(mutex_id, &taskWoken) != pdTRUE) { + return osErrorOS; + } + portEND_SWITCHING_ISR(taskWoken); + } + else if (xSemaphoreTake(mutex_id, ticks) != pdTRUE) { + return osErrorOS; + } + + return osOK; +} + +/** +* @brief Release a Mutex that was obtained by \ref osMutexWait +* @param mutex_id mutex ID obtained by \ref osMutexCreate. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS. +*/ +osStatus osMutexRelease (osMutexId mutex_id) +{ + osStatus result = osOK; + portBASE_TYPE taskWoken = pdFALSE; + + if (inHandlerMode()) { + if (xSemaphoreGiveFromISR(mutex_id, &taskWoken) != pdTRUE) { + return osErrorOS; + } + portEND_SWITCHING_ISR(taskWoken); + } + else if (xSemaphoreGive(mutex_id) != pdTRUE) + { + result = osErrorOS; + } + return result; +} + +/** +* @brief Delete a Mutex +* @param mutex_id mutex ID obtained by \ref osMutexCreate. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS. +*/ +osStatus osMutexDelete (osMutexId mutex_id) +{ + if (inHandlerMode()) { + return osErrorISR; + } + + vQueueDelete(mutex_id); + + return osOK; +} + +/******************** Semaphore Management Functions **************************/ + +#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) + +/** +* @brief Create and Initialize a Semaphore object used for managing resources +* @param semaphore_def semaphore definition referenced with \ref osSemaphore. +* @param count number of available resources. +* @retval semaphore ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS. +*/ +osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count) +{ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + + osSemaphoreId sema; + + if (semaphore_def->controlblock != NULL){ + if (count == 1) { + return xSemaphoreCreateBinaryStatic( semaphore_def->controlblock ); + } + else { +#if (configUSE_COUNTING_SEMAPHORES == 1 ) + return xSemaphoreCreateCountingStatic( count, count, semaphore_def->controlblock ); +#else + return NULL; +#endif + } + } + else { + if (count == 1) { + vSemaphoreCreateBinary(sema); + return sema; + } + else { +#if (configUSE_COUNTING_SEMAPHORES == 1 ) + return xSemaphoreCreateCounting(count, count); +#else + return NULL; +#endif + } + } +#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) // configSUPPORT_DYNAMIC_ALLOCATION == 0 + if(count == 1) { + return xSemaphoreCreateBinaryStatic( semaphore_def->controlblock ); + } + else + { +#if (configUSE_COUNTING_SEMAPHORES == 1 ) + return xSemaphoreCreateCountingStatic( count, count, semaphore_def->controlblock ); +#else + return NULL; +#endif + } +#else // configSUPPORT_STATIC_ALLOCATION == 0 && configSUPPORT_DYNAMIC_ALLOCATION == 1 + osSemaphoreId sema; + + if (count == 1) { + vSemaphoreCreateBinary(sema); + return sema; + } + else { +#if (configUSE_COUNTING_SEMAPHORES == 1 ) + return xSemaphoreCreateCounting(count, count); +#else + return NULL; +#endif + } +#endif +} + +/** +* @brief Wait until a Semaphore token becomes available +* @param semaphore_id semaphore object referenced with \ref osSemaphore. +* @param millisec timeout value or 0 in case of no time-out. +* @retval number of available tokens, or -1 in case of incorrect parameters. +* @note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS. +*/ +int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec) +{ + TickType_t ticks; + portBASE_TYPE taskWoken = pdFALSE; + + + if (semaphore_id == NULL) { + return osErrorParameter; + } + + ticks = 0; + if (millisec == osWaitForever) { + ticks = portMAX_DELAY; + } + else if (millisec != 0) { + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) { + ticks = 1; + } + } + + if (inHandlerMode()) { + if (xSemaphoreTakeFromISR(semaphore_id, &taskWoken) != pdTRUE) { + return osErrorOS; + } + portEND_SWITCHING_ISR(taskWoken); + } + else if (xSemaphoreTake(semaphore_id, ticks) != pdTRUE) { + return osErrorOS; + } + + return osOK; +} + +/** +* @brief Release a Semaphore token +* @param semaphore_id semaphore object referenced with \ref osSemaphore. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS. +*/ +osStatus osSemaphoreRelease (osSemaphoreId semaphore_id) +{ + osStatus result = osOK; + portBASE_TYPE taskWoken = pdFALSE; + + + if (inHandlerMode()) { + if (xSemaphoreGiveFromISR(semaphore_id, &taskWoken) != pdTRUE) { + return osErrorOS; + } + portEND_SWITCHING_ISR(taskWoken); + } + else { + if (xSemaphoreGive(semaphore_id) != pdTRUE) { + result = osErrorOS; + } + } + + return result; +} + +/** +* @brief Delete a Semaphore +* @param semaphore_id semaphore object referenced with \ref osSemaphore. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS. +*/ +osStatus osSemaphoreDelete (osSemaphoreId semaphore_id) +{ + if (inHandlerMode()) { + return osErrorISR; + } + + vSemaphoreDelete(semaphore_id); + + return osOK; +} + +#endif /* Use Semaphores */ + +/******************* Memory Pool Management Functions ***********************/ + +#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) + +//TODO +//This is a primitive and inefficient wrapper around the existing FreeRTOS memory management. +//A better implementation will have to modify heap_x.c! + + +typedef struct os_pool_cb { + void *pool; + uint8_t *markers; + uint32_t pool_sz; + uint32_t item_sz; + uint32_t currentIndex; +} os_pool_cb_t; + + +/** +* @brief Create and Initialize a memory pool +* @param pool_def memory pool definition referenced with \ref osPool. +* @retval memory pool ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS. +*/ +osPoolId osPoolCreate (const osPoolDef_t *pool_def) +{ +#if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + osPoolId thePool; + int itemSize = 4 * ((pool_def->item_sz + 3) / 4); + uint32_t i; + + /* First have to allocate memory for the pool control block. */ + thePool = pvPortMalloc(sizeof(os_pool_cb_t)); + + + if (thePool) { + thePool->pool_sz = pool_def->pool_sz; + thePool->item_sz = itemSize; + thePool->currentIndex = 0; + + /* Memory for markers */ + thePool->markers = pvPortMalloc(pool_def->pool_sz); + + if (thePool->markers) { + /* Now allocate the pool itself. */ + thePool->pool = pvPortMalloc(pool_def->pool_sz * itemSize); + + if (thePool->pool) { + for (i = 0; i < pool_def->pool_sz; i++) { + thePool->markers[i] = 0; + } + } + else { + vPortFree(thePool->markers); + vPortFree(thePool); + thePool = NULL; + } + } + else { + vPortFree(thePool); + thePool = NULL; + } + } + + return thePool; + +#else + return NULL; +#endif +} + +/** +* @brief Allocate a memory block from a memory pool +* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate. +* @retval address of the allocated memory block or NULL in case of no memory available. +* @note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS. +*/ +void *osPoolAlloc (osPoolId pool_id) +{ + int dummy = 0; + void *p = NULL; + uint32_t i; + uint32_t index; + + if (inHandlerMode()) { + dummy = portSET_INTERRUPT_MASK_FROM_ISR(); + } + else { + vPortEnterCritical(); + } + + for (i = 0; i < pool_id->pool_sz; i++) { + index = (pool_id->currentIndex + i) % pool_id->pool_sz; + + if (pool_id->markers[index] == 0) { + pool_id->markers[index] = 1; + p = (void *)((uint32_t)(pool_id->pool) + (index * pool_id->item_sz)); + pool_id->currentIndex = index; + break; + } + } + + if (inHandlerMode()) { + portCLEAR_INTERRUPT_MASK_FROM_ISR(dummy); + } + else { + vPortExitCritical(); + } + + return p; +} + +/** +* @brief Allocate a memory block from a memory pool and set memory block to zero +* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate. +* @retval address of the allocated memory block or NULL in case of no memory available. +* @note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS. +*/ +void *osPoolCAlloc (osPoolId pool_id) +{ + void *p = osPoolAlloc(pool_id); + + if (p != NULL) + { + memset(p, 0, sizeof(pool_id->pool_sz)); + } + + return p; +} + +/** +* @brief Return an allocated memory block back to a specific memory pool +* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate. +* @param block address of the allocated memory block that is returned to the memory pool. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS. +*/ +osStatus osPoolFree (osPoolId pool_id, void *block) +{ + uint32_t index; + + if (pool_id == NULL) { + return osErrorParameter; + } + + if (block == NULL) { + return osErrorParameter; + } + + if (block < pool_id->pool) { + return osErrorParameter; + } + + index = (uint32_t)block - (uint32_t)(pool_id->pool); + if (index % pool_id->item_sz) { + return osErrorParameter; + } + index = index / pool_id->item_sz; + if (index >= pool_id->pool_sz) { + return osErrorParameter; + } + + pool_id->markers[index] = 0; + + return osOK; +} + + +#endif /* Use Memory Pool Management */ + +/******************* Message Queue Management Functions *********************/ + +#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) /* Use Message Queues */ + +/** +* @brief Create and Initialize a Message Queue +* @param queue_def queue definition referenced with \ref osMessageQ. +* @param thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +* @retval message queue ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS. +*/ +osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id) +{ + (void) thread_id; + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + + if ((queue_def->buffer != NULL) && (queue_def->controlblock != NULL)) { + return xQueueCreateStatic(queue_def->queue_sz, queue_def->item_sz, queue_def->buffer, queue_def->controlblock); + } + else { + return xQueueCreate(queue_def->queue_sz, queue_def->item_sz); + } +#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) + return xQueueCreateStatic(queue_def->queue_sz, queue_def->item_sz, queue_def->buffer, queue_def->controlblock); +#else + return xQueueCreate(queue_def->queue_sz, queue_def->item_sz); +#endif +} + +/** +* @brief Put a Message to a Queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @param info message information. +* @param millisec timeout value or 0 in case of no time-out. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS. +*/ +osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec) +{ + portBASE_TYPE taskWoken = pdFALSE; + TickType_t ticks; + + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) { + ticks = 1; + } + + if (inHandlerMode()) { + if (xQueueSendFromISR(queue_id, &info, &taskWoken) != pdTRUE) { + return osErrorOS; + } + portEND_SWITCHING_ISR(taskWoken); + } + else { + if (xQueueSend(queue_id, &info, ticks) != pdTRUE) { + return osErrorOS; + } + } + + return osOK; +} + +/** +* @brief Get a Message or Wait for a Message from a Queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval event information that includes status code. +* @note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS. +*/ +osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec) +{ + portBASE_TYPE taskWoken; + TickType_t ticks; + osEvent event; + + event.def.message_id = queue_id; + event.value.v = 0; + + if (queue_id == NULL) { + event.status = osErrorParameter; + return event; + } + + taskWoken = pdFALSE; + + ticks = 0; + if (millisec == osWaitForever) { + ticks = portMAX_DELAY; + } + else if (millisec != 0) { + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) { + ticks = 1; + } + } + + if (inHandlerMode()) { + if (xQueueReceiveFromISR(queue_id, &event.value.v, &taskWoken) == pdTRUE) { + /* We have mail */ + event.status = osEventMessage; + } + else { + event.status = osOK; + } + portEND_SWITCHING_ISR(taskWoken); + } + else { + if (xQueueReceive(queue_id, &event.value.v, ticks) == pdTRUE) { + /* We have mail */ + event.status = osEventMessage; + } + else { + event.status = (ticks == 0) ? osOK : osEventTimeout; + } + } + + return event; +} + +#endif /* Use Message Queues */ + +/******************** Mail Queue Management Functions ***********************/ +#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) /* Use Mail Queues */ + + +typedef struct os_mailQ_cb { + const osMailQDef_t *queue_def; + QueueHandle_t handle; + osPoolId pool; +} os_mailQ_cb_t; + +/** +* @brief Create and Initialize mail queue +* @param queue_def reference to the mail queue definition obtain with \ref osMailQ +* @param thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +* @retval mail queue ID for reference by other functions or NULL in case of error. +* @note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS. +*/ +osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id) +{ +#if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + (void) thread_id; + + osPoolDef_t pool_def = {queue_def->queue_sz, queue_def->item_sz, NULL}; + + /* Create a mail queue control block */ + + *(queue_def->cb) = pvPortMalloc(sizeof(struct os_mailQ_cb)); + + if (*(queue_def->cb) == NULL) { + return NULL; + } + (*(queue_def->cb))->queue_def = queue_def; + + /* Create a queue in FreeRTOS */ + (*(queue_def->cb))->handle = xQueueCreate(queue_def->queue_sz, sizeof(void *)); + + + if ((*(queue_def->cb))->handle == NULL) { + vPortFree(*(queue_def->cb)); + return NULL; + } + + /* Create a mail pool */ + (*(queue_def->cb))->pool = osPoolCreate(&pool_def); + if ((*(queue_def->cb))->pool == NULL) { + //TODO: Delete queue. How to do it in FreeRTOS? + vPortFree(*(queue_def->cb)); + return NULL; + } + + return *(queue_def->cb); +#else + return NULL; +#endif +} + +/** +* @brief Allocate a memory block from a mail +* @param queue_id mail queue ID obtained with \ref osMailCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval pointer to memory block that can be filled with mail or NULL in case error. +* @note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS. +*/ +void *osMailAlloc (osMailQId queue_id, uint32_t millisec) +{ + (void) millisec; + void *p; + + + if (queue_id == NULL) { + return NULL; + } + + p = osPoolAlloc(queue_id->pool); + + return p; +} + +/** +* @brief Allocate a memory block from a mail and set memory block to zero +* @param queue_id mail queue ID obtained with \ref osMailCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval pointer to memory block that can be filled with mail or NULL in case error. +* @note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS. +*/ +void *osMailCAlloc (osMailQId queue_id, uint32_t millisec) +{ + uint32_t i; + void *p = osMailAlloc(queue_id, millisec); + + if (p) { + for (i = 0; i < queue_id->queue_def->item_sz; i++) { + ((uint8_t *)p)[i] = 0; + } + } + + return p; +} + +/** +* @brief Put a mail to a queue +* @param queue_id mail queue ID obtained with \ref osMailCreate. +* @param mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS. +*/ +osStatus osMailPut (osMailQId queue_id, void *mail) +{ + portBASE_TYPE taskWoken; + + + if (queue_id == NULL) { + return osErrorParameter; + } + + taskWoken = pdFALSE; + + if (inHandlerMode()) { + if (xQueueSendFromISR(queue_id->handle, &mail, &taskWoken) != pdTRUE) { + return osErrorOS; + } + portEND_SWITCHING_ISR(taskWoken); + } + else { + if (xQueueSend(queue_id->handle, &mail, 0) != pdTRUE) { + return osErrorOS; + } + } + + return osOK; +} + +/** +* @brief Get a mail from a queue +* @param queue_id mail queue ID obtained with \ref osMailCreate. +* @param millisec timeout value or 0 in case of no time-out +* @retval event that contains mail information or error code. +* @note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS. +*/ +osEvent osMailGet (osMailQId queue_id, uint32_t millisec) +{ + portBASE_TYPE taskWoken; + TickType_t ticks; + osEvent event; + + event.def.mail_id = queue_id; + + if (queue_id == NULL) { + event.status = osErrorParameter; + return event; + } + + taskWoken = pdFALSE; + + ticks = 0; + if (millisec == osWaitForever) { + ticks = portMAX_DELAY; + } + else if (millisec != 0) { + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) { + ticks = 1; + } + } + + if (inHandlerMode()) { + if (xQueueReceiveFromISR(queue_id->handle, &event.value.p, &taskWoken) == pdTRUE) { + /* We have mail */ + event.status = osEventMail; + } + else { + event.status = osOK; + } + portEND_SWITCHING_ISR(taskWoken); + } + else { + if (xQueueReceive(queue_id->handle, &event.value.p, ticks) == pdTRUE) { + /* We have mail */ + event.status = osEventMail; + } + else { + event.status = (ticks == 0) ? osOK : osEventTimeout; + } + } + + return event; +} + +/** +* @brief Free a memory block from a mail +* @param queue_id mail queue ID obtained with \ref osMailCreate. +* @param mail pointer to the memory block that was obtained with \ref osMailGet. +* @retval status code that indicates the execution status of the function. +* @note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS. +*/ +osStatus osMailFree (osMailQId queue_id, void *mail) +{ + if (queue_id == NULL) { + return osErrorParameter; + } + + return osPoolFree(queue_id->pool, mail); +} +#endif /* Use Mail Queues */ + +/*************************** Additional specific APIs to Free RTOS ************/ +/** +* @brief Handles the tick increment +* @param none. +* @retval none. +*/ +void osSystickHandler(void) +{ + +#if (INCLUDE_xTaskGetSchedulerState == 1 ) + if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED) + { +#endif /* INCLUDE_xTaskGetSchedulerState */ + xPortSysTickHandler(); +#if (INCLUDE_xTaskGetSchedulerState == 1 ) + } +#endif /* INCLUDE_xTaskGetSchedulerState */ +} + +#if ( INCLUDE_eTaskGetState == 1 ) +/** +* @brief Obtain the state of any thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval the stae of the thread, states are encoded by the osThreadState enumerated type. +*/ +osThreadState osThreadGetState(osThreadId thread_id) +{ + eTaskState ThreadState; + osThreadState result; + + ThreadState = eTaskGetState(thread_id); + + switch (ThreadState) + { + case eRunning : + result = osThreadRunning; + break; + case eReady : + result = osThreadReady; + break; + case eBlocked : + result = osThreadBlocked; + break; + case eSuspended : + result = osThreadSuspended; + break; + case eDeleted : + result = osThreadDeleted; + break; + default: + result = osThreadError; + } + + return result; +} +#endif /* INCLUDE_eTaskGetState */ + +#if (INCLUDE_eTaskGetState == 1) +/** +* @brief Check if a thread is already suspended or not. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadIsSuspended(osThreadId thread_id) +{ + if (eTaskGetState(thread_id) == eSuspended) + return osOK; + else + return osErrorOS; +} +#endif /* INCLUDE_eTaskGetState */ +/** +* @brief Suspend execution of a thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadSuspend (osThreadId thread_id) +{ +#if (INCLUDE_vTaskSuspend == 1) + vTaskSuspend(thread_id); + + return osOK; +#else + return osErrorResource; +#endif +} + +/** +* @brief Resume execution of a suspended thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadResume (osThreadId thread_id) +{ +#if (INCLUDE_vTaskSuspend == 1) + if(inHandlerMode()) + { + if (xTaskResumeFromISR(thread_id) == pdTRUE) + { + portYIELD_FROM_ISR(pdTRUE); + } + } + else + { + vTaskResume(thread_id); + } + return osOK; +#else + return osErrorResource; +#endif +} + +/** +* @brief Suspend execution of a all active threads. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadSuspendAll (void) +{ + vTaskSuspendAll(); + + return osOK; +} + +/** +* @brief Resume execution of a all suspended threads. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadResumeAll (void) +{ + if (xTaskResumeAll() == pdTRUE) + return osOK; + else + return osErrorOS; + +} + +/** +* @brief Delay a task until a specified time +* @param PreviousWakeTime Pointer to a variable that holds the time at which the +* task was last unblocked. PreviousWakeTime must be initialised with the current time +* prior to its first use (PreviousWakeTime = osKernelSysTick() ) +* @param millisec time delay value +* @retval status code that indicates the execution status of the function. +*/ +osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec) +{ +#if INCLUDE_vTaskDelayUntil + TickType_t ticks = (millisec / portTICK_PERIOD_MS); + vTaskDelayUntil((TickType_t *) PreviousWakeTime, ticks ? ticks : 1); + + return osOK; +#else + (void) millisec; + (void) PreviousWakeTime; + + return osErrorResource; +#endif +} + +/** +* @brief Abort the delay for a specific thread +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId +* @retval status code that indicates the execution status of the function. +*/ +osStatus osAbortDelay(osThreadId thread_id) +{ +#if INCLUDE_xTaskAbortDelay + + xTaskAbortDelay(thread_id); + + return osOK; +#else + (void) thread_id; + + return osErrorResource; +#endif +} + +/** +* @brief Lists all the current threads, along with their current state +* and stack usage high water mark. +* @param buffer A buffer into which the above mentioned details +* will be written +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadList (uint8_t *buffer) +{ +#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS == 1 ) ) + vTaskList((char *)buffer); +#endif + return osOK; +} + +/** +* @brief Receive an item from a queue without removing the item from the queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval event information that includes status code. +*/ +osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec) +{ + TickType_t ticks; + osEvent event; + + event.def.message_id = queue_id; + + if (queue_id == NULL) { + event.status = osErrorParameter; + return event; + } + + ticks = 0; + if (millisec == osWaitForever) { + ticks = portMAX_DELAY; + } + else if (millisec != 0) { + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) { + ticks = 1; + } + } + + if (xQueuePeek(queue_id, &event.value.v, ticks) == pdTRUE) + { + /* We have mail */ + event.status = osEventMessage; + } + else + { + event.status = (ticks == 0) ? osOK : osEventTimeout; + } + + return event; +} + +/** +* @brief Get the number of messaged stored in a queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval number of messages stored in a queue. +*/ +uint32_t osMessageWaiting(osMessageQId queue_id) +{ + if (inHandlerMode()) { + return uxQueueMessagesWaitingFromISR(queue_id); + } + else + { + return uxQueueMessagesWaiting(queue_id); + } +} + +/** +* @brief Get the available space in a message queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval available space in a message queue. +*/ +uint32_t osMessageAvailableSpace(osMessageQId queue_id) +{ + return uxQueueSpacesAvailable(queue_id); +} + +/** +* @brief Delete a Message Queue +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osMessageDelete (osMessageQId queue_id) +{ + if (inHandlerMode()) { + return osErrorISR; + } + + vQueueDelete(queue_id); + + return osOK; +} + +/** +* @brief Create and Initialize a Recursive Mutex +* @param mutex_def mutex definition referenced with \ref osMutex. +* @retval mutex ID for reference by other functions or NULL in case of error.. +*/ +osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def) +{ +#if (configUSE_RECURSIVE_MUTEXES == 1) +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + + if (mutex_def->controlblock != NULL){ + return xSemaphoreCreateRecursiveMutexStatic( mutex_def->controlblock ); + } + else { + return xSemaphoreCreateRecursiveMutex(); + } +#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) + return xSemaphoreCreateRecursiveMutexStatic( mutex_def->controlblock ); +#else + return xSemaphoreCreateRecursiveMutex(); +#endif +#else + return NULL; +#endif +} + +/** +* @brief Release a Recursive Mutex +* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osRecursiveMutexRelease (osMutexId mutex_id) +{ +#if (configUSE_RECURSIVE_MUTEXES == 1) + osStatus result = osOK; + + if (xSemaphoreGiveRecursive(mutex_id) != pdTRUE) + { + result = osErrorOS; + } + return result; +#else + return osErrorResource; +#endif +} + +/** +* @brief Release a Recursive Mutex +* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec) +{ +#if (configUSE_RECURSIVE_MUTEXES == 1) + TickType_t ticks; + + if (mutex_id == NULL) + { + return osErrorParameter; + } + + ticks = 0; + if (millisec == osWaitForever) + { + ticks = portMAX_DELAY; + } + else if (millisec != 0) + { + ticks = millisec / portTICK_PERIOD_MS; + if (ticks == 0) + { + ticks = 1; + } + } + + if (xSemaphoreTakeRecursive(mutex_id, ticks) != pdTRUE) + { + return osErrorOS; + } + return osOK; +#else + return osErrorResource; +#endif +} + +/** +* @brief Returns the current count value of a counting semaphore +* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate. +* @retval count value +*/ +uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id) +{ + return uxSemaphoreGetCount(semaphore_id); +} diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h new file mode 100644 index 0000000..1fb4186 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h @@ -0,0 +1,1026 @@ +/* ---------------------------------------------------------------------- + * $Date: 5. February 2013 + * $Revision: V1.02 + * + * Project: CMSIS-RTOS API + * Title: cmsis_os.h header file + * + * Version 0.02 + * Initial Proposal Phase + * Version 0.03 + * osKernelStart added, optional feature: main started as thread + * osSemaphores have standard behavior + * osTimerCreate does not start the timer, added osTimerStart + * osThreadPass is renamed to osThreadYield + * Version 1.01 + * Support for C++ interface + * - const attribute removed from the osXxxxDef_t typedef's + * - const attribute added to the osXxxxDef macros + * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete + * Added: osKernelInitialize + * Version 1.02 + * Control functions for short timeouts in microsecond resolution: + * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec + * Removed: osSignalGet + * + * + *---------------------------------------------------------------------------- + * + * Portions Copyright © 2016 STMicroelectronics International N.V. All rights reserved. + * Portions Copyright (c) 2013 ARM LIMITED + * All rights reserved. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * - Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + *---------------------------------------------------------------------------*/ + +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "queue.h" +#include "semphr.h" +#include "event_groups.h" + +/** +\page cmsis_os_h Header File Template: cmsis_os.h + +The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS). +Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents +its implementation. + +The file cmsis_os.h contains: + - CMSIS-RTOS API function definitions + - struct definitions for parameters and return types + - status and priority values used by CMSIS-RTOS API functions + - macros for defining threads and other kernel objects + + +Name conventions and header file modifications + +All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions. +Definitions that are prefixed \b os_ are not used in the application code but local to this header file. +All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread. + +Definitions that are marked with CAN BE CHANGED can be adapted towards the needs of the actual CMSIS-RTOS implementation. +These definitions can be specific to the underlying RTOS kernel. + +Definitions that are marked with MUST REMAIN UNCHANGED cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer +compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation. + + +Function calls from interrupt service routines + +The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR): + - \ref osSignalSet + - \ref osSemaphoreRelease + - \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree + - \ref osMessagePut, \ref osMessageGet + - \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree + +Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called +from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector. + +Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time. +If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive. + + +Define and reference object definitions + +With \#define osObjectsExternal objects are defined as external symbols. This allows to create a consistent header file +that is used throughout a project as shown below: + +Header File +\code +#include // CMSIS RTOS header file + +// Thread definition +extern void thread_sample (void const *argument); // function prototype +osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100); + +// Pool definition +osPoolDef(MyPool, 10, long); +\endcode + + +This header file defines all objects when included in a C/C++ source file. When \#define osObjectsExternal is +present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be +used throughout the whole project. + +Example +\code +#include "osObjects.h" // Definition of the CMSIS-RTOS objects +\endcode + +\code +#define osObjectExternal // Objects will be defined as external symbols +#include "osObjects.h" // Reference to the CMSIS-RTOS objects +\endcode + +*/ + +#ifndef _CMSIS_OS_H +#define _CMSIS_OS_H + +/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version. +#define osCMSIS 0x10002 ///< API version (main [31:16] .sub [15:0]) + +/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number. +#define osCMSIS_KERNEL 0x10000 ///< RTOS identification and version (main [31:16] .sub [15:0]) + +/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS. +#define osKernelSystemId "KERNEL V1.00" ///< RTOS identification string + +/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS. +#define osFeature_MainThread 1 ///< main thread 1=main can be thread, 0=not available +#define osFeature_Pool 1 ///< Memory Pools: 1=available, 0=not available +#define osFeature_MailQ 1 ///< Mail Queues: 1=available, 0=not available +#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available +#define osFeature_Signals 8 ///< maximum number of Signal Flags available per thread +#define osFeature_Semaphore 1 ///< osFeature_Semaphore function: 1=available, 0=not available +#define osFeature_Wait 0 ///< osWait function: 1=available, 0=not available +#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available + +#ifdef __cplusplus +extern "C" +{ +#endif + + +// ==== Enumeration, structures, defines ==== + +/// Priority used for thread control. +/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS. +typedef enum { + osPriorityIdle = -3, ///< priority: idle (lowest) + osPriorityLow = -2, ///< priority: low + osPriorityBelowNormal = -1, ///< priority: below normal + osPriorityNormal = 0, ///< priority: normal (default) + osPriorityAboveNormal = +1, ///< priority: above normal + osPriorityHigh = +2, ///< priority: high + osPriorityRealtime = +3, ///< priority: realtime (highest) + osPriorityError = 0x84 ///< system cannot determine priority or thread has illegal priority +} osPriority; + +/// Timeout value. +/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS. +#define osWaitForever 0xFFFFFFFF ///< wait forever timeout value + +/// Status code values returned by CMSIS-RTOS functions. +/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS. +typedef enum { + osOK = 0, ///< function completed; no error or event occurred. + osEventSignal = 0x08, ///< function completed; signal event occurred. + osEventMessage = 0x10, ///< function completed; message event occurred. + osEventMail = 0x20, ///< function completed; mail event occurred. + osEventTimeout = 0x40, ///< function completed; timeout occurred. + osErrorParameter = 0x80, ///< parameter error: a mandatory parameter was missing or specified an incorrect object. + osErrorResource = 0x81, ///< resource not available: a specified resource was not available. + osErrorTimeoutResource = 0xC1, ///< resource not available within given time: a specified resource was not available within the timeout period. + osErrorISR = 0x82, ///< not allowed in ISR context: the function cannot be called from interrupt service routines. + osErrorISRRecursive = 0x83, ///< function called multiple times from ISR with same object. + osErrorPriority = 0x84, ///< system cannot determine priority or thread has illegal priority. + osErrorNoMemory = 0x85, ///< system is out of memory: it was impossible to allocate or reserve memory for the operation. + osErrorValue = 0x86, ///< value of a parameter is out of range. + osErrorOS = 0xFF, ///< unspecified RTOS error: run-time error but no other error message fits. + os_status_reserved = 0x7FFFFFFF ///< prevent from enum down-size compiler optimization. +} osStatus; + +#if ( INCLUDE_eTaskGetState == 1 ) +/* Thread state returned by osThreadGetState */ +typedef enum { + osThreadRunning = 0x0, /* A thread is querying the state of itself, so must be running. */ + osThreadReady = 0x1 , /* The thread being queried is in a read or pending ready list. */ + osThreadBlocked = 0x2, /* The thread being queried is in the Blocked state. */ + osThreadSuspended = 0x3, /* The thread being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */ + osThreadDeleted = 0x4, /* The thread being queried has been deleted, but its TCB has not yet been freed. */ + osThreadError = 0x7FFFFFFF +} osThreadState; +#endif /* INCLUDE_eTaskGetState */ + +/// Timer type value for the timer definition. +/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS. +typedef enum { + osTimerOnce = 0, ///< one-shot timer + osTimerPeriodic = 1 ///< repeating timer +} os_timer_type; + +/// Entry point of a thread. +/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS. +typedef void (*os_pthread) (void const *argument); + +/// Entry point of a timer call back function. +/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS. +typedef void (*os_ptimer) (void const *argument); + +// >>> the following data type definitions may shall adapted towards a specific RTOS + +/// Thread ID identifies the thread (pointer to a thread control block). +/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS. +typedef TaskHandle_t osThreadId; + +/// Timer ID identifies the timer (pointer to a timer control block). +/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS. +typedef TimerHandle_t osTimerId; + +/// Mutex ID identifies the mutex (pointer to a mutex control block). +/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS. +typedef SemaphoreHandle_t osMutexId; + +/// Semaphore ID identifies the semaphore (pointer to a semaphore control block). +/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS. +typedef SemaphoreHandle_t osSemaphoreId; + +/// Pool ID identifies the memory pool (pointer to a memory pool control block). +/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_pool_cb *osPoolId; + +/// Message ID identifies the message queue (pointer to a message queue control block). +/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS. +typedef QueueHandle_t osMessageQId; + +/// Mail ID identifies the mail queue (pointer to a mail queue control block). +/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_mailQ_cb *osMailQId; + + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + +typedef StaticTask_t osStaticThreadDef_t; +typedef StaticTimer_t osStaticTimerDef_t; +typedef StaticSemaphore_t osStaticMutexDef_t; +typedef StaticSemaphore_t osStaticSemaphoreDef_t; +typedef StaticQueue_t osStaticMessageQDef_t; + +#endif + + + + +/// Thread Definition structure contains startup information of a thread. +/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS. +typedef struct os_thread_def { + char *name; ///< Thread name + os_pthread pthread; ///< start address of thread function + osPriority tpriority; ///< initial thread priority + uint32_t instances; ///< maximum number of instances of that thread function + uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + uint32_t *buffer; ///< stack buffer for static allocation; NULL for dynamic allocation + osStaticThreadDef_t *controlblock; ///< control block to hold thread's data for static allocation; NULL for dynamic allocation +#endif +} osThreadDef_t; + +/// Timer Definition structure contains timer parameters. +/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS. +typedef struct os_timer_def { + os_ptimer ptimer; ///< start address of a timer function +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + osStaticTimerDef_t *controlblock; ///< control block to hold timer's data for static allocation; NULL for dynamic allocation +#endif +} osTimerDef_t; + +/// Mutex Definition structure contains setup information for a mutex. +/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS. +typedef struct os_mutex_def { + uint32_t dummy; ///< dummy value. +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + osStaticMutexDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation +#endif +} osMutexDef_t; + +/// Semaphore Definition structure contains setup information for a semaphore. +/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS. +typedef struct os_semaphore_def { + uint32_t dummy; ///< dummy value. +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + osStaticSemaphoreDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation +#endif +} osSemaphoreDef_t; + +/// Definition structure for memory block allocation. +/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS. +typedef struct os_pool_def { + uint32_t pool_sz; ///< number of items (elements) in the pool + uint32_t item_sz; ///< size of an item + void *pool; ///< pointer to memory for pool +} osPoolDef_t; + +/// Definition structure for message queue. +/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS. +typedef struct os_messageQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + uint8_t *buffer; ///< buffer for static allocation; NULL for dynamic allocation + osStaticMessageQDef_t *controlblock; ///< control block to hold queue's data for static allocation; NULL for dynamic allocation +#endif + //void *pool; ///< memory array for messages +} osMessageQDef_t; + +/// Definition structure for mail queue. +/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS. +typedef struct os_mailQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item + struct os_mailQ_cb **cb; +} osMailQDef_t; + +/// Event structure contains detailed information about an event. +/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS. +/// However the struct may be extended at the end. +typedef struct { + osStatus status; ///< status code: event or error information + union { + uint32_t v; ///< message as 32-bit value + void *p; ///< message or mail as void pointer + int32_t signals; ///< signal flags + } value; ///< event value + union { + osMailQId mail_id; ///< mail id obtained by \ref osMailCreate + osMessageQId message_id; ///< message id obtained by \ref osMessageCreate + } def; ///< event definition +} osEvent; + + +// ==== Kernel Control Functions ==== + +/// Initialize the RTOS Kernel for creating objects. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS. +osStatus osKernelInitialize (void); + +/// Start the RTOS Kernel. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS. +osStatus osKernelStart (void); + +/// Check if the RTOS kernel is already started. +/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS. +/// \return 0 RTOS is not started, 1 RTOS is started. +int32_t osKernelRunning(void); + +#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available + +/// Get the RTOS kernel system timer counter +/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS. +/// \return RTOS kernel system timer as 32-bit value +uint32_t osKernelSysTick (void); + +/// The RTOS kernel system timer frequency in Hz +/// \note Reflects the system timer setting and is typically defined in a configuration file. +#define osKernelSysTickFrequency (configTICK_RATE_HZ) + +/// Convert a microseconds value to a RTOS kernel system timer value. +/// \param microsec time value in microseconds. +/// \return time value normalized to the \ref osKernelSysTickFrequency +#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000) + +#endif // System Timer available + +// ==== Thread Management ==== + +/// Create a Thread Definition with function, priority, and stack requirements. +/// \param name name of the thread function. +/// \param priority initial priority of the thread function. +/// \param instances number of possible thread instances. +/// \param stacksz stack size (in bytes) requirements for the thread function. +/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osThreadDef(name, thread, priority, instances, stacksz) \ +extern const osThreadDef_t os_thread_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osThreadDef(name, thread, priority, instances, stacksz) \ +const osThreadDef_t os_thread_def_##name = \ +{ #name, (thread), (priority), (instances), (stacksz), NULL, NULL } + +#define osThreadStaticDef(name, thread, priority, instances, stacksz, buffer, control) \ +const osThreadDef_t os_thread_def_##name = \ +{ #name, (thread), (priority), (instances), (stacksz), (buffer), (control) } +#else //configSUPPORT_STATIC_ALLOCATION == 0 + +#define osThreadDef(name, thread, priority, instances, stacksz) \ +const osThreadDef_t os_thread_def_##name = \ +{ #name, (thread), (priority), (instances), (stacksz)} +#endif +#endif + +/// Access a Thread definition. +/// \param name name of the thread definition object. +/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osThread(name) \ +&os_thread_def_##name + +/// Create a thread and add it to Active Threads and set it to state READY. +/// \param[in] thread_def thread definition referenced with \ref osThread. +/// \param[in] argument pointer that is passed to the thread function as start argument. +/// \return thread ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS. +osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument); + +/// Return the thread ID of the current running thread. +/// \return thread ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS. +osThreadId osThreadGetId (void); + +/// Terminate execution of a thread and remove it from Active Threads. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS. +osStatus osThreadTerminate (osThreadId thread_id); + +/// Pass control to next thread that is in state \b READY. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS. +osStatus osThreadYield (void); + +/// Change priority of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] priority new priority value for the thread function. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS. +osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority); + +/// Get current priority of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return current priority value of the thread function. +/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS. +osPriority osThreadGetPriority (osThreadId thread_id); + + +// ==== Generic Wait Functions ==== + +/// Wait for Timeout (Time Delay). +/// \param[in] millisec time delay value +/// \return status code that indicates the execution status of the function. +osStatus osDelay (uint32_t millisec); + +#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available + +/// Wait for Signal, Message, Mail, or Timeout. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return event that contains signal, message, or mail information or error code. +/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS. +osEvent osWait (uint32_t millisec); + +#endif // Generic Wait available + + +// ==== Timer Management Functions ==== +/// Define a Timer object. +/// \param name name of the timer object. +/// \param function name of the timer call back function. +/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osTimerDef(name, function) \ +extern const osTimerDef_t os_timer_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osTimerDef(name, function) \ +const osTimerDef_t os_timer_def_##name = \ +{ (function), NULL } + +#define osTimerStaticDef(name, function, control) \ +const osTimerDef_t os_timer_def_##name = \ +{ (function), (control) } +#else //configSUPPORT_STATIC_ALLOCATION == 0 +#define osTimerDef(name, function) \ +const osTimerDef_t os_timer_def_##name = \ +{ (function) } +#endif +#endif + +/// Access a Timer definition. +/// \param name name of the timer object. +/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osTimer(name) \ +&os_timer_def_##name + +/// Create a timer. +/// \param[in] timer_def timer object referenced with \ref osTimer. +/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. +/// \param[in] argument argument to the timer call back function. +/// \return timer ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS. +osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument); + +/// Start or restart a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \param[in] millisec time delay value of the timer. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS. +osStatus osTimerStart (osTimerId timer_id, uint32_t millisec); + +/// Stop the timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS. +osStatus osTimerStop (osTimerId timer_id); + +/// Delete a timer that was created by \ref osTimerCreate. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS. +osStatus osTimerDelete (osTimerId timer_id); + + +// ==== Signal Management ==== + +/// Set the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that should be set. +/// \return osOK if successful, osErrorOS if failed. +/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS. +int32_t osSignalSet (osThreadId thread_id, int32_t signals); + +/// Clear the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that shall be cleared. +/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. +/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS. +int32_t osSignalClear (osThreadId thread_id, int32_t signals); + +/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. +/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return event flag information or error code. +/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS. +osEvent osSignalWait (int32_t signals, uint32_t millisec); + + +// ==== Mutex Management ==== + +/// Define a Mutex. +/// \param name name of the mutex object. +/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMutexDef(name) \ +extern const osMutexDef_t os_mutex_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osMutexDef(name) \ +const osMutexDef_t os_mutex_def_##name = { 0, NULL } + +#define osMutexStaticDef(name, control) \ +const osMutexDef_t os_mutex_def_##name = { 0, (control) } +#else //configSUPPORT_STATIC_ALLOCATION == 0 +#define osMutexDef(name) \ +const osMutexDef_t os_mutex_def_##name = { 0 } + +#endif + +#endif + +/// Access a Mutex definition. +/// \param name name of the mutex object. +/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMutex(name) \ +&os_mutex_def_##name + +/// Create and Initialize a Mutex object. +/// \param[in] mutex_def mutex definition referenced with \ref osMutex. +/// \return mutex ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS. +osMutexId osMutexCreate (const osMutexDef_t *mutex_def); + +/// Wait until a Mutex becomes available. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS. +osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec); + +/// Release a Mutex that was obtained by \ref osMutexWait. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS. +osStatus osMutexRelease (osMutexId mutex_id); + +/// Delete a Mutex that was created by \ref osMutexCreate. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS. +osStatus osMutexDelete (osMutexId mutex_id); + + +// ==== Semaphore Management Functions ==== + +#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) // Semaphore available + +/// Define a Semaphore object. +/// \param name name of the semaphore object. +/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osSemaphoreDef(name) \ +extern const osSemaphoreDef_t os_semaphore_def_##name +#else // define the object + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osSemaphoreDef(name) \ +const osSemaphoreDef_t os_semaphore_def_##name = { 0, NULL } + +#define osSemaphoreStaticDef(name, control) \ +const osSemaphoreDef_t os_semaphore_def_##name = { 0, (control) } + +#else //configSUPPORT_STATIC_ALLOCATION == 0 +#define osSemaphoreDef(name) \ +const osSemaphoreDef_t os_semaphore_def_##name = { 0 } +#endif +#endif + +/// Access a Semaphore definition. +/// \param name name of the semaphore object. +/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osSemaphore(name) \ +&os_semaphore_def_##name + +/// Create and Initialize a Semaphore object used for managing resources. +/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore. +/// \param[in] count number of available resources. +/// \return semaphore ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS. +osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count); + +/// Wait until a Semaphore token becomes available. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return number of available tokens, or -1 in case of incorrect parameters. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS. +int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec); + +/// Release a Semaphore token. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS. +osStatus osSemaphoreRelease (osSemaphoreId semaphore_id); + +/// Delete a Semaphore that was created by \ref osSemaphoreCreate. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS. +osStatus osSemaphoreDelete (osSemaphoreId semaphore_id); + +#endif // Semaphore available + + +// ==== Memory Pool Management Functions ==== + +#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool Management available + +/// \brief Define a Memory Pool. +/// \param name name of the memory pool. +/// \param no maximum number of blocks (objects) in the memory pool. +/// \param type data type of a single block (object). +/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osPoolDef(name, no, type) \ +extern const osPoolDef_t os_pool_def_##name +#else // define the object +#define osPoolDef(name, no, type) \ +const osPoolDef_t os_pool_def_##name = \ +{ (no), sizeof(type), NULL } +#endif + +/// \brief Access a Memory Pool definition. +/// \param name name of the memory pool +/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osPool(name) \ +&os_pool_def_##name + +/// Create and Initialize a memory pool. +/// \param[in] pool_def memory pool definition referenced with \ref osPool. +/// \return memory pool ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS. +osPoolId osPoolCreate (const osPoolDef_t *pool_def); + +/// Allocate a memory block from a memory pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS. +void *osPoolAlloc (osPoolId pool_id); + +/// Allocate a memory block from a memory pool and set memory block to zero. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS. +void *osPoolCAlloc (osPoolId pool_id); + +/// Return an allocated memory block back to a specific memory pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \param[in] block address of the allocated memory block that is returned to the memory pool. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS. +osStatus osPoolFree (osPoolId pool_id, void *block); + +#endif // Memory Pool Management available + + +// ==== Message Queue Management Functions ==== + +#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queues available + +/// \brief Create a Message Queue Definition. +/// \param name name of the queue. +/// \param queue_sz maximum number of messages in the queue. +/// \param type data type of a single message element (for debugger). +/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMessageQDef(name, queue_sz, type) \ +extern const osMessageQDef_t os_messageQ_def_##name +#else // define the object +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) +#define osMessageQDef(name, queue_sz, type) \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), sizeof (type), NULL, NULL } + +#define osMessageQStaticDef(name, queue_sz, type, buffer, control) \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), sizeof (type) , (buffer), (control)} +#else //configSUPPORT_STATIC_ALLOCATION == 1 +#define osMessageQDef(name, queue_sz, type) \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), sizeof (type) } + +#endif +#endif + +/// \brief Access a Message Queue Definition. +/// \param name name of the queue +/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMessageQ(name) \ +&os_messageQ_def_##name + +/// Create and Initialize a Message Queue. +/// \param[in] queue_def queue definition referenced with \ref osMessageQ. +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return message queue ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS. +osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id); + +/// Put a Message to a Queue. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] info message information. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS. +osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec); + +/// Get a Message or Wait for a Message from a Queue. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return event information that includes status code. +/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS. +osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec); + +#endif // Message Queues available + + +// ==== Mail Queue Management Functions ==== + +#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queues available + +/// \brief Create a Mail Queue Definition. +/// \param name name of the queue +/// \param queue_sz maximum number of messages in queue +/// \param type data type of a single message element +/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMailQDef(name, queue_sz, type) \ +extern struct os_mailQ_cb *os_mailQ_cb_##name \ +extern osMailQDef_t os_mailQ_def_##name +#else // define the object +#define osMailQDef(name, queue_sz, type) \ +struct os_mailQ_cb *os_mailQ_cb_##name; \ +const osMailQDef_t os_mailQ_def_##name = \ +{ (queue_sz), sizeof (type), (&os_mailQ_cb_##name) } +#endif + +/// \brief Access a Mail Queue Definition. +/// \param name name of the queue +/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMailQ(name) \ +&os_mailQ_def_##name + +/// Create and Initialize mail queue. +/// \param[in] queue_def reference to the mail queue definition obtain with \ref osMailQ +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return mail queue ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS. +osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id); + +/// Allocate a memory block from a mail. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS. +void *osMailAlloc (osMailQId queue_id, uint32_t millisec); + +/// Allocate a memory block from a mail and set memory block to zero. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS. +void *osMailCAlloc (osMailQId queue_id, uint32_t millisec); + +/// Put a mail to a queue. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS. +osStatus osMailPut (osMailQId queue_id, void *mail); + +/// Get a mail from a queue. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return event that contains mail information or error code. +/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS. +osEvent osMailGet (osMailQId queue_id, uint32_t millisec); + +/// Free a memory block from a mail. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail pointer to the memory block that was obtained with \ref osMailGet. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS. +osStatus osMailFree (osMailQId queue_id, void *mail); + +#endif // Mail Queues available + +/*************************** Additional specific APIs to Free RTOS ************/ +/** +* @brief Handles the tick increment +* @param none. +* @retval none. +*/ +void osSystickHandler(void); + +#if ( INCLUDE_eTaskGetState == 1 ) +/** +* @brief Obtain the state of any thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval the stae of the thread, states are encoded by the osThreadState enumerated type. +*/ +osThreadState osThreadGetState(osThreadId thread_id); +#endif /* INCLUDE_eTaskGetState */ + +#if ( INCLUDE_eTaskGetState == 1 ) +/** +* @brief Check if a thread is already suspended or not. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ + +osStatus osThreadIsSuspended(osThreadId thread_id); + +#endif /* INCLUDE_eTaskGetState */ + +/** +* @brief Suspend execution of a thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadSuspend (osThreadId thread_id); + +/** +* @brief Resume execution of a suspended thread. +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadResume (osThreadId thread_id); + +/** +* @brief Suspend execution of a all active threads. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadSuspendAll (void); + +/** +* @brief Resume execution of a all suspended threads. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadResumeAll (void); + +/** +* @brief Delay a task until a specified time +* @param PreviousWakeTime Pointer to a variable that holds the time at which the +* task was last unblocked. PreviousWakeTime must be initialised with the current time +* prior to its first use (PreviousWakeTime = osKernelSysTick() ) +* @param millisec time delay value +* @retval status code that indicates the execution status of the function. +*/ +osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec); + +/** +* @brief Abort the delay for a specific thread +* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId +* @retval status code that indicates the execution status of the function. +*/ +osStatus osAbortDelay(osThreadId thread_id); + +/** +* @brief Lists all the current threads, along with their current state +* and stack usage high water mark. +* @param buffer A buffer into which the above mentioned details +* will be written +* @retval status code that indicates the execution status of the function. +*/ +osStatus osThreadList (uint8_t *buffer); + +/** +* @brief Receive an item from a queue without removing the item from the queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval event information that includes status code. +*/ +osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec); + +/** +* @brief Get the number of messaged stored in a queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval number of messages stored in a queue. +*/ +uint32_t osMessageWaiting(osMessageQId queue_id); + +/** +* @brief Get the available space in a message queue. +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval available space in a message queue. +*/ +uint32_t osMessageAvailableSpace(osMessageQId queue_id); + +/** +* @brief Delete a Message Queue +* @param queue_id message queue ID obtained with \ref osMessageCreate. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osMessageDelete (osMessageQId queue_id); + +/** +* @brief Create and Initialize a Recursive Mutex +* @param mutex_def mutex definition referenced with \ref osMutex. +* @retval mutex ID for reference by other functions or NULL in case of error.. +*/ +osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def); + +/** +* @brief Release a Recursive Mutex +* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osRecursiveMutexRelease (osMutexId mutex_id); + +/** +* @brief Release a Recursive Mutex +* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. +* @param millisec timeout value or 0 in case of no time-out. +* @retval status code that indicates the execution status of the function. +*/ +osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec); + +/** +* @brief Returns the current count value of a counting semaphore +* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate. +* @retval count value +*/ +uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id); + +#ifdef __cplusplus +} +#endif + +#endif // _CMSIS_OS_H diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/croutine.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/croutine.c new file mode 100644 index 0000000..507e217 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/croutine.c @@ -0,0 +1,353 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#include "FreeRTOS.h" +#include "task.h" +#include "croutine.h" + +/* Remove the whole file is co-routines are not being used. */ +#if( configUSE_CO_ROUTINES != 0 ) + +/* + * Some kernel aware debuggers require data to be viewed to be global, rather + * than file scope. + */ +#ifdef portREMOVE_STATIC_QUALIFIER + #define static +#endif + + +/* Lists for ready and blocked co-routines. --------------------*/ +static List_t pxReadyCoRoutineLists[ configMAX_CO_ROUTINE_PRIORITIES ]; /*< Prioritised ready co-routines. */ +static List_t xDelayedCoRoutineList1; /*< Delayed co-routines. */ +static List_t xDelayedCoRoutineList2; /*< Delayed co-routines (two lists are used - one for delays that have overflowed the current tick count. */ +static List_t * pxDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used. */ +static List_t * pxOverflowDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used to hold co-routines that have overflowed the current tick count. */ +static List_t xPendingReadyCoRoutineList; /*< Holds co-routines that have been readied by an external event. They cannot be added directly to the ready lists as the ready lists cannot be accessed by interrupts. */ + +/* Other file private variables. --------------------------------*/ +CRCB_t * pxCurrentCoRoutine = NULL; +static UBaseType_t uxTopCoRoutineReadyPriority = 0; +static TickType_t xCoRoutineTickCount = 0, xLastTickCount = 0, xPassedTicks = 0; + +/* The initial state of the co-routine when it is created. */ +#define corINITIAL_STATE ( 0 ) + +/* + * Place the co-routine represented by pxCRCB into the appropriate ready queue + * for the priority. It is inserted at the end of the list. + * + * This macro accesses the co-routine ready lists and therefore must not be + * used from within an ISR. + */ +#define prvAddCoRoutineToReadyQueue( pxCRCB ) \ +{ \ + if( pxCRCB->uxPriority > uxTopCoRoutineReadyPriority ) \ + { \ + uxTopCoRoutineReadyPriority = pxCRCB->uxPriority; \ + } \ + vListInsertEnd( ( List_t * ) &( pxReadyCoRoutineLists[ pxCRCB->uxPriority ] ), &( pxCRCB->xGenericListItem ) ); \ +} + +/* + * Utility to ready all the lists used by the scheduler. This is called + * automatically upon the creation of the first co-routine. + */ +static void prvInitialiseCoRoutineLists( void ); + +/* + * Co-routines that are readied by an interrupt cannot be placed directly into + * the ready lists (there is no mutual exclusion). Instead they are placed in + * in the pending ready list in order that they can later be moved to the ready + * list by the co-routine scheduler. + */ +static void prvCheckPendingReadyList( void ); + +/* + * Macro that looks at the list of co-routines that are currently delayed to + * see if any require waking. + * + * Co-routines are stored in the queue in the order of their wake time - + * meaning once one co-routine has been found whose timer has not expired + * we need not look any further down the list. + */ +static void prvCheckDelayedList( void ); + +/*-----------------------------------------------------------*/ + +BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex ) +{ +BaseType_t xReturn; +CRCB_t *pxCoRoutine; + + /* Allocate the memory that will store the co-routine control block. */ + pxCoRoutine = ( CRCB_t * ) pvPortMalloc( sizeof( CRCB_t ) ); + if( pxCoRoutine ) + { + /* If pxCurrentCoRoutine is NULL then this is the first co-routine to + be created and the co-routine data structures need initialising. */ + if( pxCurrentCoRoutine == NULL ) + { + pxCurrentCoRoutine = pxCoRoutine; + prvInitialiseCoRoutineLists(); + } + + /* Check the priority is within limits. */ + if( uxPriority >= configMAX_CO_ROUTINE_PRIORITIES ) + { + uxPriority = configMAX_CO_ROUTINE_PRIORITIES - 1; + } + + /* Fill out the co-routine control block from the function parameters. */ + pxCoRoutine->uxState = corINITIAL_STATE; + pxCoRoutine->uxPriority = uxPriority; + pxCoRoutine->uxIndex = uxIndex; + pxCoRoutine->pxCoRoutineFunction = pxCoRoutineCode; + + /* Initialise all the other co-routine control block parameters. */ + vListInitialiseItem( &( pxCoRoutine->xGenericListItem ) ); + vListInitialiseItem( &( pxCoRoutine->xEventListItem ) ); + + /* Set the co-routine control block as a link back from the ListItem_t. + This is so we can get back to the containing CRCB from a generic item + in a list. */ + listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xGenericListItem ), pxCoRoutine ); + listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xEventListItem ), pxCoRoutine ); + + /* Event lists are always in priority order. */ + listSET_LIST_ITEM_VALUE( &( pxCoRoutine->xEventListItem ), ( ( TickType_t ) configMAX_CO_ROUTINE_PRIORITIES - ( TickType_t ) uxPriority ) ); + + /* Now the co-routine has been initialised it can be added to the ready + list at the correct priority. */ + prvAddCoRoutineToReadyQueue( pxCoRoutine ); + + xReturn = pdPASS; + } + else + { + xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY; + } + + return xReturn; +} +/*-----------------------------------------------------------*/ + +void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList ) +{ +TickType_t xTimeToWake; + + /* Calculate the time to wake - this may overflow but this is + not a problem. */ + xTimeToWake = xCoRoutineTickCount + xTicksToDelay; + + /* We must remove ourselves from the ready list before adding + ourselves to the blocked list as the same list item is used for + both lists. */ + ( void ) uxListRemove( ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) ); + + /* The list item will be inserted in wake time order. */ + listSET_LIST_ITEM_VALUE( &( pxCurrentCoRoutine->xGenericListItem ), xTimeToWake ); + + if( xTimeToWake < xCoRoutineTickCount ) + { + /* Wake time has overflowed. Place this item in the + overflow list. */ + vListInsert( ( List_t * ) pxOverflowDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) ); + } + else + { + /* The wake time has not overflowed, so we can use the + current block list. */ + vListInsert( ( List_t * ) pxDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) ); + } + + if( pxEventList ) + { + /* Also add the co-routine to an event list. If this is done then the + function must be called with interrupts disabled. */ + vListInsert( pxEventList, &( pxCurrentCoRoutine->xEventListItem ) ); + } +} +/*-----------------------------------------------------------*/ + +static void prvCheckPendingReadyList( void ) +{ + /* Are there any co-routines waiting to get moved to the ready list? These + are co-routines that have been readied by an ISR. The ISR cannot access + the ready lists itself. */ + while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE ) + { + CRCB_t *pxUnblockedCRCB; + + /* The pending ready list can be accessed by an ISR. */ + portDISABLE_INTERRUPTS(); + { + pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( (&xPendingReadyCoRoutineList) ); + ( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) ); + } + portENABLE_INTERRUPTS(); + + ( void ) uxListRemove( &( pxUnblockedCRCB->xGenericListItem ) ); + prvAddCoRoutineToReadyQueue( pxUnblockedCRCB ); + } +} +/*-----------------------------------------------------------*/ + +static void prvCheckDelayedList( void ) +{ +CRCB_t *pxCRCB; + + xPassedTicks = xTaskGetTickCount() - xLastTickCount; + while( xPassedTicks ) + { + xCoRoutineTickCount++; + xPassedTicks--; + + /* If the tick count has overflowed we need to swap the ready lists. */ + if( xCoRoutineTickCount == 0 ) + { + List_t * pxTemp; + + /* Tick count has overflowed so we need to swap the delay lists. If there are + any items in pxDelayedCoRoutineList here then there is an error! */ + pxTemp = pxDelayedCoRoutineList; + pxDelayedCoRoutineList = pxOverflowDelayedCoRoutineList; + pxOverflowDelayedCoRoutineList = pxTemp; + } + + /* See if this tick has made a timeout expire. */ + while( listLIST_IS_EMPTY( pxDelayedCoRoutineList ) == pdFALSE ) + { + pxCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedCoRoutineList ); + + if( xCoRoutineTickCount < listGET_LIST_ITEM_VALUE( &( pxCRCB->xGenericListItem ) ) ) + { + /* Timeout not yet expired. */ + break; + } + + portDISABLE_INTERRUPTS(); + { + /* The event could have occurred just before this critical + section. If this is the case then the generic list item will + have been moved to the pending ready list and the following + line is still valid. Also the pvContainer parameter will have + been set to NULL so the following lines are also valid. */ + ( void ) uxListRemove( &( pxCRCB->xGenericListItem ) ); + + /* Is the co-routine waiting on an event also? */ + if( pxCRCB->xEventListItem.pxContainer ) + { + ( void ) uxListRemove( &( pxCRCB->xEventListItem ) ); + } + } + portENABLE_INTERRUPTS(); + + prvAddCoRoutineToReadyQueue( pxCRCB ); + } + } + + xLastTickCount = xCoRoutineTickCount; +} +/*-----------------------------------------------------------*/ + +void vCoRoutineSchedule( void ) +{ + /* See if any co-routines readied by events need moving to the ready lists. */ + prvCheckPendingReadyList(); + + /* See if any delayed co-routines have timed out. */ + prvCheckDelayedList(); + + /* Find the highest priority queue that contains ready co-routines. */ + while( listLIST_IS_EMPTY( &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ) ) + { + if( uxTopCoRoutineReadyPriority == 0 ) + { + /* No more co-routines to check. */ + return; + } + --uxTopCoRoutineReadyPriority; + } + + /* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines + of the same priority get an equal share of the processor time. */ + listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ); + + /* Call the co-routine. */ + ( pxCurrentCoRoutine->pxCoRoutineFunction )( pxCurrentCoRoutine, pxCurrentCoRoutine->uxIndex ); + + return; +} +/*-----------------------------------------------------------*/ + +static void prvInitialiseCoRoutineLists( void ) +{ +UBaseType_t uxPriority; + + for( uxPriority = 0; uxPriority < configMAX_CO_ROUTINE_PRIORITIES; uxPriority++ ) + { + vListInitialise( ( List_t * ) &( pxReadyCoRoutineLists[ uxPriority ] ) ); + } + + vListInitialise( ( List_t * ) &xDelayedCoRoutineList1 ); + vListInitialise( ( List_t * ) &xDelayedCoRoutineList2 ); + vListInitialise( ( List_t * ) &xPendingReadyCoRoutineList ); + + /* Start with pxDelayedCoRoutineList using list1 and the + pxOverflowDelayedCoRoutineList using list2. */ + pxDelayedCoRoutineList = &xDelayedCoRoutineList1; + pxOverflowDelayedCoRoutineList = &xDelayedCoRoutineList2; +} +/*-----------------------------------------------------------*/ + +BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList ) +{ +CRCB_t *pxUnblockedCRCB; +BaseType_t xReturn; + + /* This function is called from within an interrupt. It can only access + event lists and the pending ready list. This function assumes that a + check has already been made to ensure pxEventList is not empty. */ + pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList ); + ( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) ); + vListInsertEnd( ( List_t * ) &( xPendingReadyCoRoutineList ), &( pxUnblockedCRCB->xEventListItem ) ); + + if( pxUnblockedCRCB->uxPriority >= pxCurrentCoRoutine->uxPriority ) + { + xReturn = pdTRUE; + } + else + { + xReturn = pdFALSE; + } + + return xReturn; +} + +#endif /* configUSE_CO_ROUTINES == 0 */ + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c new file mode 100644 index 0000000..0bf3b96 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c @@ -0,0 +1,753 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* Standard includes. */ +#include + +/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining +all the API functions to use the MPU wrappers. That should only be done when +task.h is included from an application file. */ +#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "event_groups.h" + +/* Lint e961, e750 and e9021 are suppressed as a MISRA exception justified +because the MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined +for the header files above, but not in this file, in order to generate the +correct privileged Vs unprivileged linkage and placement. */ +#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750 !e9021 See comment above. */ + +/* The following bit fields convey control information in a task's event list +item value. It is important they don't clash with the +taskEVENT_LIST_ITEM_VALUE_IN_USE definition. */ +#if configUSE_16_BIT_TICKS == 1 + #define eventCLEAR_EVENTS_ON_EXIT_BIT 0x0100U + #define eventUNBLOCKED_DUE_TO_BIT_SET 0x0200U + #define eventWAIT_FOR_ALL_BITS 0x0400U + #define eventEVENT_BITS_CONTROL_BYTES 0xff00U +#else + #define eventCLEAR_EVENTS_ON_EXIT_BIT 0x01000000UL + #define eventUNBLOCKED_DUE_TO_BIT_SET 0x02000000UL + #define eventWAIT_FOR_ALL_BITS 0x04000000UL + #define eventEVENT_BITS_CONTROL_BYTES 0xff000000UL +#endif + +typedef struct EventGroupDef_t +{ + EventBits_t uxEventBits; + List_t xTasksWaitingForBits; /*< List of tasks waiting for a bit to be set. */ + + #if( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxEventGroupNumber; + #endif + + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t ucStaticallyAllocated; /*< Set to pdTRUE if the event group is statically allocated to ensure no attempt is made to free the memory. */ + #endif +} EventGroup_t; + +/*-----------------------------------------------------------*/ + +/* + * Test the bits set in uxCurrentEventBits to see if the wait condition is met. + * The wait condition is defined by xWaitForAllBits. If xWaitForAllBits is + * pdTRUE then the wait condition is met if all the bits set in uxBitsToWaitFor + * are also set in uxCurrentEventBits. If xWaitForAllBits is pdFALSE then the + * wait condition is met if any of the bits set in uxBitsToWait for are also set + * in uxCurrentEventBits. + */ +static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits ) PRIVILEGED_FUNCTION; + +/*-----------------------------------------------------------*/ + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + + EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ) + { + EventGroup_t *pxEventBits; + + /* A StaticEventGroup_t object must be provided. */ + configASSERT( pxEventGroupBuffer ); + + #if( configASSERT_DEFINED == 1 ) + { + /* Sanity check that the size of the structure used to declare a + variable of type StaticEventGroup_t equals the size of the real + event group structure. */ + volatile size_t xSize = sizeof( StaticEventGroup_t ); + configASSERT( xSize == sizeof( EventGroup_t ) ); + } /*lint !e529 xSize is referenced if configASSERT() is defined. */ + #endif /* configASSERT_DEFINED */ + + /* The user has provided a statically allocated event group - use it. */ + pxEventBits = ( EventGroup_t * ) pxEventGroupBuffer; /*lint !e740 !e9087 EventGroup_t and StaticEventGroup_t are deliberately aliased for data hiding purposes and guaranteed to have the same size and alignment requirement - checked by configASSERT(). */ + + if( pxEventBits != NULL ) + { + pxEventBits->uxEventBits = 0; + vListInitialise( &( pxEventBits->xTasksWaitingForBits ) ); + + #if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + { + /* Both static and dynamic allocation can be used, so note that + this event group was created statically in case the event group + is later deleted. */ + pxEventBits->ucStaticallyAllocated = pdTRUE; + } + #endif /* configSUPPORT_DYNAMIC_ALLOCATION */ + + traceEVENT_GROUP_CREATE( pxEventBits ); + } + else + { + /* xEventGroupCreateStatic should only ever be called with + pxEventGroupBuffer pointing to a pre-allocated (compile time + allocated) StaticEventGroup_t variable. */ + traceEVENT_GROUP_CREATE_FAILED(); + } + + return pxEventBits; + } + +#endif /* configSUPPORT_STATIC_ALLOCATION */ +/*-----------------------------------------------------------*/ + +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + + EventGroupHandle_t xEventGroupCreate( void ) + { + EventGroup_t *pxEventBits; + + /* Allocate the event group. Justification for MISRA deviation as + follows: pvPortMalloc() always ensures returned memory blocks are + aligned per the requirements of the MCU stack. In this case + pvPortMalloc() must return a pointer that is guaranteed to meet the + alignment requirements of the EventGroup_t structure - which (if you + follow it through) is the alignment requirements of the TickType_t type + (EventBits_t being of TickType_t itself). Therefore, whenever the + stack alignment requirements are greater than or equal to the + TickType_t alignment requirements the cast is safe. In other cases, + where the natural word size of the architecture is less than + sizeof( TickType_t ), the TickType_t variables will be accessed in two + or more reads operations, and the alignment requirements is only that + of each individual read. */ + pxEventBits = ( EventGroup_t * ) pvPortMalloc( sizeof( EventGroup_t ) ); /*lint !e9087 !e9079 see comment above. */ + + if( pxEventBits != NULL ) + { + pxEventBits->uxEventBits = 0; + vListInitialise( &( pxEventBits->xTasksWaitingForBits ) ); + + #if( configSUPPORT_STATIC_ALLOCATION == 1 ) + { + /* Both static and dynamic allocation can be used, so note this + event group was allocated statically in case the event group is + later deleted. */ + pxEventBits->ucStaticallyAllocated = pdFALSE; + } + #endif /* configSUPPORT_STATIC_ALLOCATION */ + + traceEVENT_GROUP_CREATE( pxEventBits ); + } + else + { + traceEVENT_GROUP_CREATE_FAILED(); /*lint !e9063 Else branch only exists to allow tracing and does not generate code if trace macros are not defined. */ + } + + return pxEventBits; + } + +#endif /* configSUPPORT_DYNAMIC_ALLOCATION */ +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ) +{ +EventBits_t uxOriginalBitValue, uxReturn; +EventGroup_t *pxEventBits = xEventGroup; +BaseType_t xAlreadyYielded; +BaseType_t xTimeoutOccurred = pdFALSE; + + configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + configASSERT( uxBitsToWaitFor != 0 ); + #if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) + { + configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) ); + } + #endif + + vTaskSuspendAll(); + { + uxOriginalBitValue = pxEventBits->uxEventBits; + + ( void ) xEventGroupSetBits( xEventGroup, uxBitsToSet ); + + if( ( ( uxOriginalBitValue | uxBitsToSet ) & uxBitsToWaitFor ) == uxBitsToWaitFor ) + { + /* All the rendezvous bits are now set - no need to block. */ + uxReturn = ( uxOriginalBitValue | uxBitsToSet ); + + /* Rendezvous always clear the bits. They will have been cleared + already unless this is the only task in the rendezvous. */ + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + + xTicksToWait = 0; + } + else + { + if( xTicksToWait != ( TickType_t ) 0 ) + { + traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor ); + + /* Store the bits that the calling task is waiting for in the + task's event list item so the kernel knows when a match is + found. Then enter the blocked state. */ + vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | eventCLEAR_EVENTS_ON_EXIT_BIT | eventWAIT_FOR_ALL_BITS ), xTicksToWait ); + + /* This assignment is obsolete as uxReturn will get set after + the task unblocks, but some compilers mistakenly generate a + warning about uxReturn being returned without being set if the + assignment is omitted. */ + uxReturn = 0; + } + else + { + /* The rendezvous bits were not set, but no block time was + specified - just return the current event bit value. */ + uxReturn = pxEventBits->uxEventBits; + xTimeoutOccurred = pdTRUE; + } + } + } + xAlreadyYielded = xTaskResumeAll(); + + if( xTicksToWait != ( TickType_t ) 0 ) + { + if( xAlreadyYielded == pdFALSE ) + { + portYIELD_WITHIN_API(); + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* The task blocked to wait for its required bits to be set - at this + point either the required bits were set or the block time expired. If + the required bits were set they will have been stored in the task's + event list item, and they should now be retrieved then cleared. */ + uxReturn = uxTaskResetEventItemValue(); + + if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 ) + { + /* The task timed out, just return the current event bit value. */ + taskENTER_CRITICAL(); + { + uxReturn = pxEventBits->uxEventBits; + + /* Although the task got here because it timed out before the + bits it was waiting for were set, it is possible that since it + unblocked another task has set the bits. If this is the case + then it needs to clear the bits before exiting. */ + if( ( uxReturn & uxBitsToWaitFor ) == uxBitsToWaitFor ) + { + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + taskEXIT_CRITICAL(); + + xTimeoutOccurred = pdTRUE; + } + else + { + /* The task unblocked because the bits were set. */ + } + + /* Control bits might be set as the task had blocked should not be + returned. */ + uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES; + } + + traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred ); + + /* Prevent compiler warnings when trace macros are not used. */ + ( void ) xTimeoutOccurred; + + return uxReturn; +} +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ) +{ +EventGroup_t *pxEventBits = xEventGroup; +EventBits_t uxReturn, uxControlBits = 0; +BaseType_t xWaitConditionMet, xAlreadyYielded; +BaseType_t xTimeoutOccurred = pdFALSE; + + /* Check the user is not attempting to wait on the bits used by the kernel + itself, and that at least one bit is being requested. */ + configASSERT( xEventGroup ); + configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + configASSERT( uxBitsToWaitFor != 0 ); + #if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) + { + configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) ); + } + #endif + + vTaskSuspendAll(); + { + const EventBits_t uxCurrentEventBits = pxEventBits->uxEventBits; + + /* Check to see if the wait condition is already met or not. */ + xWaitConditionMet = prvTestWaitCondition( uxCurrentEventBits, uxBitsToWaitFor, xWaitForAllBits ); + + if( xWaitConditionMet != pdFALSE ) + { + /* The wait condition has already been met so there is no need to + block. */ + uxReturn = uxCurrentEventBits; + xTicksToWait = ( TickType_t ) 0; + + /* Clear the wait bits if requested to do so. */ + if( xClearOnExit != pdFALSE ) + { + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else if( xTicksToWait == ( TickType_t ) 0 ) + { + /* The wait condition has not been met, but no block time was + specified, so just return the current value. */ + uxReturn = uxCurrentEventBits; + xTimeoutOccurred = pdTRUE; + } + else + { + /* The task is going to block to wait for its required bits to be + set. uxControlBits are used to remember the specified behaviour of + this call to xEventGroupWaitBits() - for use when the event bits + unblock the task. */ + if( xClearOnExit != pdFALSE ) + { + uxControlBits |= eventCLEAR_EVENTS_ON_EXIT_BIT; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + if( xWaitForAllBits != pdFALSE ) + { + uxControlBits |= eventWAIT_FOR_ALL_BITS; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* Store the bits that the calling task is waiting for in the + task's event list item so the kernel knows when a match is + found. Then enter the blocked state. */ + vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | uxControlBits ), xTicksToWait ); + + /* This is obsolete as it will get set after the task unblocks, but + some compilers mistakenly generate a warning about the variable + being returned without being set if it is not done. */ + uxReturn = 0; + + traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor ); + } + } + xAlreadyYielded = xTaskResumeAll(); + + if( xTicksToWait != ( TickType_t ) 0 ) + { + if( xAlreadyYielded == pdFALSE ) + { + portYIELD_WITHIN_API(); + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* The task blocked to wait for its required bits to be set - at this + point either the required bits were set or the block time expired. If + the required bits were set they will have been stored in the task's + event list item, and they should now be retrieved then cleared. */ + uxReturn = uxTaskResetEventItemValue(); + + if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 ) + { + taskENTER_CRITICAL(); + { + /* The task timed out, just return the current event bit value. */ + uxReturn = pxEventBits->uxEventBits; + + /* It is possible that the event bits were updated between this + task leaving the Blocked state and running again. */ + if( prvTestWaitCondition( uxReturn, uxBitsToWaitFor, xWaitForAllBits ) != pdFALSE ) + { + if( xClearOnExit != pdFALSE ) + { + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + xTimeoutOccurred = pdTRUE; + } + taskEXIT_CRITICAL(); + } + else + { + /* The task unblocked because the bits were set. */ + } + + /* The task blocked so control bits may have been set. */ + uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES; + } + traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred ); + + /* Prevent compiler warnings when trace macros are not used. */ + ( void ) xTimeoutOccurred; + + return uxReturn; +} +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) +{ +EventGroup_t *pxEventBits = xEventGroup; +EventBits_t uxReturn; + + /* Check the user is not attempting to clear the bits used by the kernel + itself. */ + configASSERT( xEventGroup ); + configASSERT( ( uxBitsToClear & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + + taskENTER_CRITICAL(); + { + traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear ); + + /* The value returned is the event group value prior to the bits being + cleared. */ + uxReturn = pxEventBits->uxEventBits; + + /* Clear the bits. */ + pxEventBits->uxEventBits &= ~uxBitsToClear; + } + taskEXIT_CRITICAL(); + + return uxReturn; +} +/*-----------------------------------------------------------*/ + +#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) ) + + BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) + { + BaseType_t xReturn; + + traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear ); + xReturn = xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL ); /*lint !e9087 Can't avoid cast to void* as a generic callback function not specific to this use case. Callback casts back to original type so safe. */ + + return xReturn; + } + +#endif +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) +{ +UBaseType_t uxSavedInterruptStatus; +EventGroup_t const * const pxEventBits = xEventGroup; +EventBits_t uxReturn; + + uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR(); + { + uxReturn = pxEventBits->uxEventBits; + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus ); + + return uxReturn; +} /*lint !e818 EventGroupHandle_t is a typedef used in other functions to so can't be pointer to const. */ +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) +{ +ListItem_t *pxListItem, *pxNext; +ListItem_t const *pxListEnd; +List_t const * pxList; +EventBits_t uxBitsToClear = 0, uxBitsWaitedFor, uxControlBits; +EventGroup_t *pxEventBits = xEventGroup; +BaseType_t xMatchFound = pdFALSE; + + /* Check the user is not attempting to set the bits used by the kernel + itself. */ + configASSERT( xEventGroup ); + configASSERT( ( uxBitsToSet & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + + pxList = &( pxEventBits->xTasksWaitingForBits ); + pxListEnd = listGET_END_MARKER( pxList ); /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. */ + vTaskSuspendAll(); + { + traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet ); + + pxListItem = listGET_HEAD_ENTRY( pxList ); + + /* Set the bits. */ + pxEventBits->uxEventBits |= uxBitsToSet; + + /* See if the new bit value should unblock any tasks. */ + while( pxListItem != pxListEnd ) + { + pxNext = listGET_NEXT( pxListItem ); + uxBitsWaitedFor = listGET_LIST_ITEM_VALUE( pxListItem ); + xMatchFound = pdFALSE; + + /* Split the bits waited for from the control bits. */ + uxControlBits = uxBitsWaitedFor & eventEVENT_BITS_CONTROL_BYTES; + uxBitsWaitedFor &= ~eventEVENT_BITS_CONTROL_BYTES; + + if( ( uxControlBits & eventWAIT_FOR_ALL_BITS ) == ( EventBits_t ) 0 ) + { + /* Just looking for single bit being set. */ + if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) != ( EventBits_t ) 0 ) + { + xMatchFound = pdTRUE; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) == uxBitsWaitedFor ) + { + /* All bits are set. */ + xMatchFound = pdTRUE; + } + else + { + /* Need all bits to be set, but not all the bits were set. */ + } + + if( xMatchFound != pdFALSE ) + { + /* The bits match. Should the bits be cleared on exit? */ + if( ( uxControlBits & eventCLEAR_EVENTS_ON_EXIT_BIT ) != ( EventBits_t ) 0 ) + { + uxBitsToClear |= uxBitsWaitedFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* Store the actual event flag value in the task's event list + item before removing the task from the event list. The + eventUNBLOCKED_DUE_TO_BIT_SET bit is set so the task knows + that is was unblocked due to its required bits matching, rather + than because it timed out. */ + vTaskRemoveFromUnorderedEventList( pxListItem, pxEventBits->uxEventBits | eventUNBLOCKED_DUE_TO_BIT_SET ); + } + + /* Move onto the next list item. Note pxListItem->pxNext is not + used here as the list item may have been removed from the event list + and inserted into the ready/pending reading list. */ + pxListItem = pxNext; + } + + /* Clear any bits that matched when the eventCLEAR_EVENTS_ON_EXIT_BIT + bit was set in the control word. */ + pxEventBits->uxEventBits &= ~uxBitsToClear; + } + ( void ) xTaskResumeAll(); + + return pxEventBits->uxEventBits; +} +/*-----------------------------------------------------------*/ + +void vEventGroupDelete( EventGroupHandle_t xEventGroup ) +{ +EventGroup_t *pxEventBits = xEventGroup; +const List_t *pxTasksWaitingForBits = &( pxEventBits->xTasksWaitingForBits ); + + vTaskSuspendAll(); + { + traceEVENT_GROUP_DELETE( xEventGroup ); + + while( listCURRENT_LIST_LENGTH( pxTasksWaitingForBits ) > ( UBaseType_t ) 0 ) + { + /* Unblock the task, returning 0 as the event list is being deleted + and cannot therefore have any bits set. */ + configASSERT( pxTasksWaitingForBits->xListEnd.pxNext != ( const ListItem_t * ) &( pxTasksWaitingForBits->xListEnd ) ); + vTaskRemoveFromUnorderedEventList( pxTasksWaitingForBits->xListEnd.pxNext, eventUNBLOCKED_DUE_TO_BIT_SET ); + } + + #if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) ) + { + /* The event group can only have been allocated dynamically - free + it again. */ + vPortFree( pxEventBits ); + } + #elif( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) ) + { + /* The event group could have been allocated statically or + dynamically, so check before attempting to free the memory. */ + if( pxEventBits->ucStaticallyAllocated == ( uint8_t ) pdFALSE ) + { + vPortFree( pxEventBits ); + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + #endif /* configSUPPORT_DYNAMIC_ALLOCATION */ + } + ( void ) xTaskResumeAll(); +} +/*-----------------------------------------------------------*/ + +/* For internal use only - execute a 'set bits' command that was pended from +an interrupt. */ +void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet ) +{ + ( void ) xEventGroupSetBits( pvEventGroup, ( EventBits_t ) ulBitsToSet ); /*lint !e9079 Can't avoid cast to void* as a generic timer callback prototype. Callback casts back to original type so safe. */ +} +/*-----------------------------------------------------------*/ + +/* For internal use only - execute a 'clear bits' command that was pended from +an interrupt. */ +void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear ) +{ + ( void ) xEventGroupClearBits( pvEventGroup, ( EventBits_t ) ulBitsToClear ); /*lint !e9079 Can't avoid cast to void* as a generic timer callback prototype. Callback casts back to original type so safe. */ +} +/*-----------------------------------------------------------*/ + +static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits ) +{ +BaseType_t xWaitConditionMet = pdFALSE; + + if( xWaitForAllBits == pdFALSE ) + { + /* Task only has to wait for one bit within uxBitsToWaitFor to be + set. Is one already set? */ + if( ( uxCurrentEventBits & uxBitsToWaitFor ) != ( EventBits_t ) 0 ) + { + xWaitConditionMet = pdTRUE; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else + { + /* Task has to wait for all the bits in uxBitsToWaitFor to be set. + Are they set already? */ + if( ( uxCurrentEventBits & uxBitsToWaitFor ) == uxBitsToWaitFor ) + { + xWaitConditionMet = pdTRUE; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + + return xWaitConditionMet; +} +/*-----------------------------------------------------------*/ + +#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) ) + + BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken ) + { + BaseType_t xReturn; + + traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet ); + xReturn = xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken ); /*lint !e9087 Can't avoid cast to void* as a generic callback function not specific to this use case. Callback casts back to original type so safe. */ + + return xReturn; + } + +#endif +/*-----------------------------------------------------------*/ + +#if (configUSE_TRACE_FACILITY == 1) + + UBaseType_t uxEventGroupGetNumber( void* xEventGroup ) + { + UBaseType_t xReturn; + EventGroup_t const *pxEventBits = ( EventGroup_t * ) xEventGroup; /*lint !e9087 !e9079 EventGroupHandle_t is a pointer to an EventGroup_t, but EventGroupHandle_t is kept opaque outside of this file for data hiding purposes. */ + + if( xEventGroup == NULL ) + { + xReturn = 0; + } + else + { + xReturn = pxEventBits->uxEventGroupNumber; + } + + return xReturn; + } + +#endif /* configUSE_TRACE_FACILITY */ +/*-----------------------------------------------------------*/ + +#if ( configUSE_TRACE_FACILITY == 1 ) + + void vEventGroupSetNumber( void * xEventGroup, UBaseType_t uxEventGroupNumber ) + { + ( ( EventGroup_t * ) xEventGroup )->uxEventGroupNumber = uxEventGroupNumber; /*lint !e9087 !e9079 EventGroupHandle_t is a pointer to an EventGroup_t, but EventGroupHandle_t is kept opaque outside of this file for data hiding purposes. */ + } + +#endif /* configUSE_TRACE_FACILITY */ +/*-----------------------------------------------------------*/ + + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h new file mode 100644 index 0000000..5a1a497 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h @@ -0,0 +1,1295 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef INC_FREERTOS_H +#define INC_FREERTOS_H + +/* + * Include the generic headers required for the FreeRTOS port being used. + */ +#include + +/* + * If stdint.h cannot be located then: + * + If using GCC ensure the -nostdint options is *not* being used. + * + Ensure the project's include path includes the directory in which your + * compiler stores stdint.h. + * + Set any compiler options necessary for it to support C99, as technically + * stdint.h is only mandatory with C99 (FreeRTOS does not require C99 in any + * other way). + * + The FreeRTOS download includes a simple stdint.h definition that can be + * used in cases where none is provided by the compiler. The files only + * contains the typedefs required to build FreeRTOS. Read the instructions + * in FreeRTOS/source/stdint.readme for more information. + */ +#include /* READ COMMENT ABOVE. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Application specific configuration options. */ +#include "FreeRTOSConfig.h" + +/* Basic FreeRTOS definitions. */ +#include "projdefs.h" + +/* Definitions specific to the port being used. */ +#include "portable.h" + +/* Must be defaulted before configUSE_NEWLIB_REENTRANT is used below. */ +#ifndef configUSE_NEWLIB_REENTRANT + #define configUSE_NEWLIB_REENTRANT 0 +#endif + +/* Required if struct _reent is used. */ +#if ( configUSE_NEWLIB_REENTRANT == 1 ) + #include +#endif +/* + * Check all the required application specific macros have been defined. + * These macros are application specific and (as downloaded) are defined + * within FreeRTOSConfig.h. + */ + +#ifndef configMINIMAL_STACK_SIZE + #error Missing definition: configMINIMAL_STACK_SIZE must be defined in FreeRTOSConfig.h. configMINIMAL_STACK_SIZE defines the size (in words) of the stack allocated to the idle task. Refer to the demo project provided for your port for a suitable value. +#endif + +#ifndef configMAX_PRIORITIES + #error Missing definition: configMAX_PRIORITIES must be defined in FreeRTOSConfig.h. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#if configMAX_PRIORITIES < 1 + #error configMAX_PRIORITIES must be defined to be greater than or equal to 1. +#endif + +#ifndef configUSE_PREEMPTION + #error Missing definition: configUSE_PREEMPTION must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_IDLE_HOOK + #error Missing definition: configUSE_IDLE_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_TICK_HOOK + #error Missing definition: configUSE_TICK_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_16_BIT_TICKS + #error Missing definition: configUSE_16_BIT_TICKS must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_CO_ROUTINES + #define configUSE_CO_ROUTINES 0 +#endif + +#ifndef INCLUDE_vTaskPrioritySet + #define INCLUDE_vTaskPrioritySet 0 +#endif + +#ifndef INCLUDE_uxTaskPriorityGet + #define INCLUDE_uxTaskPriorityGet 0 +#endif + +#ifndef INCLUDE_vTaskDelete + #define INCLUDE_vTaskDelete 0 +#endif + +#ifndef INCLUDE_vTaskSuspend + #define INCLUDE_vTaskSuspend 0 +#endif + +#ifndef INCLUDE_vTaskDelayUntil + #define INCLUDE_vTaskDelayUntil 0 +#endif + +#ifndef INCLUDE_vTaskDelay + #define INCLUDE_vTaskDelay 0 +#endif + +#ifndef INCLUDE_xTaskGetIdleTaskHandle + #define INCLUDE_xTaskGetIdleTaskHandle 0 +#endif + +#ifndef INCLUDE_xTaskAbortDelay + #define INCLUDE_xTaskAbortDelay 0 +#endif + +#ifndef INCLUDE_xQueueGetMutexHolder + #define INCLUDE_xQueueGetMutexHolder 0 +#endif + +#ifndef INCLUDE_xSemaphoreGetMutexHolder + #define INCLUDE_xSemaphoreGetMutexHolder INCLUDE_xQueueGetMutexHolder +#endif + +#ifndef INCLUDE_xTaskGetHandle + #define INCLUDE_xTaskGetHandle 0 +#endif + +#ifndef INCLUDE_uxTaskGetStackHighWaterMark + #define INCLUDE_uxTaskGetStackHighWaterMark 0 +#endif + +#ifndef INCLUDE_uxTaskGetStackHighWaterMark2 + #define INCLUDE_uxTaskGetStackHighWaterMark2 0 +#endif + +#ifndef INCLUDE_eTaskGetState + #define INCLUDE_eTaskGetState 0 +#endif + +#ifndef INCLUDE_xTaskResumeFromISR + #define INCLUDE_xTaskResumeFromISR 1 +#endif + +#ifndef INCLUDE_xTimerPendFunctionCall + #define INCLUDE_xTimerPendFunctionCall 0 +#endif + +#ifndef INCLUDE_xTaskGetSchedulerState + #define INCLUDE_xTaskGetSchedulerState 0 +#endif + +#ifndef INCLUDE_xTaskGetCurrentTaskHandle + #define INCLUDE_xTaskGetCurrentTaskHandle 0 +#endif + +#if configUSE_CO_ROUTINES != 0 + #ifndef configMAX_CO_ROUTINE_PRIORITIES + #error configMAX_CO_ROUTINE_PRIORITIES must be greater than or equal to 1. + #endif +#endif + +#ifndef configUSE_DAEMON_TASK_STARTUP_HOOK + #define configUSE_DAEMON_TASK_STARTUP_HOOK 0 +#endif + +#ifndef configUSE_APPLICATION_TASK_TAG + #define configUSE_APPLICATION_TASK_TAG 0 +#endif + +#ifndef configNUM_THREAD_LOCAL_STORAGE_POINTERS + #define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0 +#endif + +#ifndef configUSE_RECURSIVE_MUTEXES + #define configUSE_RECURSIVE_MUTEXES 0 +#endif + +#ifndef configUSE_MUTEXES + #define configUSE_MUTEXES 0 +#endif + +#ifndef configUSE_TIMERS + #define configUSE_TIMERS 0 +#endif + +#ifndef configUSE_COUNTING_SEMAPHORES + #define configUSE_COUNTING_SEMAPHORES 0 +#endif + +#ifndef configUSE_ALTERNATIVE_API + #define configUSE_ALTERNATIVE_API 0 +#endif + +#ifndef portCRITICAL_NESTING_IN_TCB + #define portCRITICAL_NESTING_IN_TCB 0 +#endif + +#ifndef configMAX_TASK_NAME_LEN + #define configMAX_TASK_NAME_LEN 16 +#endif + +#ifndef configIDLE_SHOULD_YIELD + #define configIDLE_SHOULD_YIELD 1 +#endif + +#if configMAX_TASK_NAME_LEN < 1 + #error configMAX_TASK_NAME_LEN must be set to a minimum of 1 in FreeRTOSConfig.h +#endif + +#ifndef configASSERT + #define configASSERT( x ) + #define configASSERT_DEFINED 0 +#else + #define configASSERT_DEFINED 1 +#endif + +/* configPRECONDITION should be defined as configASSERT. +The CBMC proofs need a way to track assumptions and assertions. +A configPRECONDITION statement should express an implicit invariant or +assumption made. A configASSERT statement should express an invariant that must +hold explicit before calling the code. */ +#ifndef configPRECONDITION + #define configPRECONDITION( X ) configASSERT(X) + #define configPRECONDITION_DEFINED 0 +#else + #define configPRECONDITION_DEFINED 1 +#endif + +#ifndef portMEMORY_BARRIER + #define portMEMORY_BARRIER() +#endif + +#ifndef portSOFTWARE_BARRIER + #define portSOFTWARE_BARRIER() +#endif + +/* The timers module relies on xTaskGetSchedulerState(). */ +#if configUSE_TIMERS == 1 + + #ifndef configTIMER_TASK_PRIORITY + #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_PRIORITY must also be defined. + #endif /* configTIMER_TASK_PRIORITY */ + + #ifndef configTIMER_QUEUE_LENGTH + #error If configUSE_TIMERS is set to 1 then configTIMER_QUEUE_LENGTH must also be defined. + #endif /* configTIMER_QUEUE_LENGTH */ + + #ifndef configTIMER_TASK_STACK_DEPTH + #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_STACK_DEPTH must also be defined. + #endif /* configTIMER_TASK_STACK_DEPTH */ + +#endif /* configUSE_TIMERS */ + +#ifndef portSET_INTERRUPT_MASK_FROM_ISR + #define portSET_INTERRUPT_MASK_FROM_ISR() 0 +#endif + +#ifndef portCLEAR_INTERRUPT_MASK_FROM_ISR + #define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue +#endif + +#ifndef portCLEAN_UP_TCB + #define portCLEAN_UP_TCB( pxTCB ) ( void ) pxTCB +#endif + +#ifndef portPRE_TASK_DELETE_HOOK + #define portPRE_TASK_DELETE_HOOK( pvTaskToDelete, pxYieldPending ) +#endif + +#ifndef portSETUP_TCB + #define portSETUP_TCB( pxTCB ) ( void ) pxTCB +#endif + +#ifndef configQUEUE_REGISTRY_SIZE + #define configQUEUE_REGISTRY_SIZE 0U +#endif + +#if ( configQUEUE_REGISTRY_SIZE < 1 ) + #define vQueueAddToRegistry( xQueue, pcName ) + #define vQueueUnregisterQueue( xQueue ) + #define pcQueueGetName( xQueue ) +#endif + +#ifndef portPOINTER_SIZE_TYPE + #define portPOINTER_SIZE_TYPE uint32_t +#endif + +/* Remove any unused trace macros. */ +#ifndef traceSTART + /* Used to perform any necessary initialisation - for example, open a file + into which trace is to be written. */ + #define traceSTART() +#endif + +#ifndef traceEND + /* Use to close a trace, for example close a file into which trace has been + written. */ + #define traceEND() +#endif + +#ifndef traceTASK_SWITCHED_IN + /* Called after a task has been selected to run. pxCurrentTCB holds a pointer + to the task control block of the selected task. */ + #define traceTASK_SWITCHED_IN() +#endif + +#ifndef traceINCREASE_TICK_COUNT + /* Called before stepping the tick count after waking from tickless idle + sleep. */ + #define traceINCREASE_TICK_COUNT( x ) +#endif + +#ifndef traceLOW_POWER_IDLE_BEGIN + /* Called immediately before entering tickless idle. */ + #define traceLOW_POWER_IDLE_BEGIN() +#endif + +#ifndef traceLOW_POWER_IDLE_END + /* Called when returning to the Idle task after a tickless idle. */ + #define traceLOW_POWER_IDLE_END() +#endif + +#ifndef traceTASK_SWITCHED_OUT + /* Called before a task has been selected to run. pxCurrentTCB holds a pointer + to the task control block of the task being switched out. */ + #define traceTASK_SWITCHED_OUT() +#endif + +#ifndef traceTASK_PRIORITY_INHERIT + /* Called when a task attempts to take a mutex that is already held by a + lower priority task. pxTCBOfMutexHolder is a pointer to the TCB of the task + that holds the mutex. uxInheritedPriority is the priority the mutex holder + will inherit (the priority of the task that is attempting to obtain the + muted. */ + #define traceTASK_PRIORITY_INHERIT( pxTCBOfMutexHolder, uxInheritedPriority ) +#endif + +#ifndef traceTASK_PRIORITY_DISINHERIT + /* Called when a task releases a mutex, the holding of which had resulted in + the task inheriting the priority of a higher priority task. + pxTCBOfMutexHolder is a pointer to the TCB of the task that is releasing the + mutex. uxOriginalPriority is the task's configured (base) priority. */ + #define traceTASK_PRIORITY_DISINHERIT( pxTCBOfMutexHolder, uxOriginalPriority ) +#endif + +#ifndef traceBLOCKING_ON_QUEUE_RECEIVE + /* Task is about to block because it cannot read from a + queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore + upon which the read was attempted. pxCurrentTCB points to the TCB of the + task that attempted the read. */ + #define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue ) +#endif + +#ifndef traceBLOCKING_ON_QUEUE_PEEK + /* Task is about to block because it cannot read from a + queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore + upon which the read was attempted. pxCurrentTCB points to the TCB of the + task that attempted the read. */ + #define traceBLOCKING_ON_QUEUE_PEEK( pxQueue ) +#endif + +#ifndef traceBLOCKING_ON_QUEUE_SEND + /* Task is about to block because it cannot write to a + queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore + upon which the write was attempted. pxCurrentTCB points to the TCB of the + task that attempted the write. */ + #define traceBLOCKING_ON_QUEUE_SEND( pxQueue ) +#endif + +#ifndef configCHECK_FOR_STACK_OVERFLOW + #define configCHECK_FOR_STACK_OVERFLOW 0 +#endif + +#ifndef configRECORD_STACK_HIGH_ADDRESS + #define configRECORD_STACK_HIGH_ADDRESS 0 +#endif + +#ifndef configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H + #define configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H 0 +#endif + +/* The following event macros are embedded in the kernel API calls. */ + +#ifndef traceMOVED_TASK_TO_READY_STATE + #define traceMOVED_TASK_TO_READY_STATE( pxTCB ) +#endif + +#ifndef tracePOST_MOVED_TASK_TO_READY_STATE + #define tracePOST_MOVED_TASK_TO_READY_STATE( pxTCB ) +#endif + +#ifndef traceQUEUE_CREATE + #define traceQUEUE_CREATE( pxNewQueue ) +#endif + +#ifndef traceQUEUE_CREATE_FAILED + #define traceQUEUE_CREATE_FAILED( ucQueueType ) +#endif + +#ifndef traceCREATE_MUTEX + #define traceCREATE_MUTEX( pxNewQueue ) +#endif + +#ifndef traceCREATE_MUTEX_FAILED + #define traceCREATE_MUTEX_FAILED() +#endif + +#ifndef traceGIVE_MUTEX_RECURSIVE + #define traceGIVE_MUTEX_RECURSIVE( pxMutex ) +#endif + +#ifndef traceGIVE_MUTEX_RECURSIVE_FAILED + #define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex ) +#endif + +#ifndef traceTAKE_MUTEX_RECURSIVE + #define traceTAKE_MUTEX_RECURSIVE( pxMutex ) +#endif + +#ifndef traceTAKE_MUTEX_RECURSIVE_FAILED + #define traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex ) +#endif + +#ifndef traceCREATE_COUNTING_SEMAPHORE + #define traceCREATE_COUNTING_SEMAPHORE() +#endif + +#ifndef traceCREATE_COUNTING_SEMAPHORE_FAILED + #define traceCREATE_COUNTING_SEMAPHORE_FAILED() +#endif + +#ifndef traceQUEUE_SEND + #define traceQUEUE_SEND( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FAILED + #define traceQUEUE_SEND_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE + #define traceQUEUE_RECEIVE( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK + #define traceQUEUE_PEEK( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK_FAILED + #define traceQUEUE_PEEK_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK_FROM_ISR + #define traceQUEUE_PEEK_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FAILED + #define traceQUEUE_RECEIVE_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FROM_ISR + #define traceQUEUE_SEND_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FROM_ISR_FAILED + #define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FROM_ISR + #define traceQUEUE_RECEIVE_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FROM_ISR_FAILED + #define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK_FROM_ISR_FAILED + #define traceQUEUE_PEEK_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_DELETE + #define traceQUEUE_DELETE( pxQueue ) +#endif + +#ifndef traceTASK_CREATE + #define traceTASK_CREATE( pxNewTCB ) +#endif + +#ifndef traceTASK_CREATE_FAILED + #define traceTASK_CREATE_FAILED() +#endif + +#ifndef traceTASK_DELETE + #define traceTASK_DELETE( pxTaskToDelete ) +#endif + +#ifndef traceTASK_DELAY_UNTIL + #define traceTASK_DELAY_UNTIL( x ) +#endif + +#ifndef traceTASK_DELAY + #define traceTASK_DELAY() +#endif + +#ifndef traceTASK_PRIORITY_SET + #define traceTASK_PRIORITY_SET( pxTask, uxNewPriority ) +#endif + +#ifndef traceTASK_SUSPEND + #define traceTASK_SUSPEND( pxTaskToSuspend ) +#endif + +#ifndef traceTASK_RESUME + #define traceTASK_RESUME( pxTaskToResume ) +#endif + +#ifndef traceTASK_RESUME_FROM_ISR + #define traceTASK_RESUME_FROM_ISR( pxTaskToResume ) +#endif + +#ifndef traceTASK_INCREMENT_TICK + #define traceTASK_INCREMENT_TICK( xTickCount ) +#endif + +#ifndef traceTIMER_CREATE + #define traceTIMER_CREATE( pxNewTimer ) +#endif + +#ifndef traceTIMER_CREATE_FAILED + #define traceTIMER_CREATE_FAILED() +#endif + +#ifndef traceTIMER_COMMAND_SEND + #define traceTIMER_COMMAND_SEND( xTimer, xMessageID, xMessageValueValue, xReturn ) +#endif + +#ifndef traceTIMER_EXPIRED + #define traceTIMER_EXPIRED( pxTimer ) +#endif + +#ifndef traceTIMER_COMMAND_RECEIVED + #define traceTIMER_COMMAND_RECEIVED( pxTimer, xMessageID, xMessageValue ) +#endif + +#ifndef traceMALLOC + #define traceMALLOC( pvAddress, uiSize ) +#endif + +#ifndef traceFREE + #define traceFREE( pvAddress, uiSize ) +#endif + +#ifndef traceEVENT_GROUP_CREATE + #define traceEVENT_GROUP_CREATE( xEventGroup ) +#endif + +#ifndef traceEVENT_GROUP_CREATE_FAILED + #define traceEVENT_GROUP_CREATE_FAILED() +#endif + +#ifndef traceEVENT_GROUP_SYNC_BLOCK + #define traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor ) +#endif + +#ifndef traceEVENT_GROUP_SYNC_END + #define traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred +#endif + +#ifndef traceEVENT_GROUP_WAIT_BITS_BLOCK + #define traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor ) +#endif + +#ifndef traceEVENT_GROUP_WAIT_BITS_END + #define traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred +#endif + +#ifndef traceEVENT_GROUP_CLEAR_BITS + #define traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear ) +#endif + +#ifndef traceEVENT_GROUP_CLEAR_BITS_FROM_ISR + #define traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear ) +#endif + +#ifndef traceEVENT_GROUP_SET_BITS + #define traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet ) +#endif + +#ifndef traceEVENT_GROUP_SET_BITS_FROM_ISR + #define traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet ) +#endif + +#ifndef traceEVENT_GROUP_DELETE + #define traceEVENT_GROUP_DELETE( xEventGroup ) +#endif + +#ifndef tracePEND_FUNC_CALL + #define tracePEND_FUNC_CALL(xFunctionToPend, pvParameter1, ulParameter2, ret) +#endif + +#ifndef tracePEND_FUNC_CALL_FROM_ISR + #define tracePEND_FUNC_CALL_FROM_ISR(xFunctionToPend, pvParameter1, ulParameter2, ret) +#endif + +#ifndef traceQUEUE_REGISTRY_ADD + #define traceQUEUE_REGISTRY_ADD(xQueue, pcQueueName) +#endif + +#ifndef traceTASK_NOTIFY_TAKE_BLOCK + #define traceTASK_NOTIFY_TAKE_BLOCK() +#endif + +#ifndef traceTASK_NOTIFY_TAKE + #define traceTASK_NOTIFY_TAKE() +#endif + +#ifndef traceTASK_NOTIFY_WAIT_BLOCK + #define traceTASK_NOTIFY_WAIT_BLOCK() +#endif + +#ifndef traceTASK_NOTIFY_WAIT + #define traceTASK_NOTIFY_WAIT() +#endif + +#ifndef traceTASK_NOTIFY + #define traceTASK_NOTIFY() +#endif + +#ifndef traceTASK_NOTIFY_FROM_ISR + #define traceTASK_NOTIFY_FROM_ISR() +#endif + +#ifndef traceTASK_NOTIFY_GIVE_FROM_ISR + #define traceTASK_NOTIFY_GIVE_FROM_ISR() +#endif + +#ifndef traceSTREAM_BUFFER_CREATE_FAILED + #define traceSTREAM_BUFFER_CREATE_FAILED( xIsMessageBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_CREATE_STATIC_FAILED + #define traceSTREAM_BUFFER_CREATE_STATIC_FAILED( xReturn, xIsMessageBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_CREATE + #define traceSTREAM_BUFFER_CREATE( pxStreamBuffer, xIsMessageBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_DELETE + #define traceSTREAM_BUFFER_DELETE( xStreamBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_RESET + #define traceSTREAM_BUFFER_RESET( xStreamBuffer ) +#endif + +#ifndef traceBLOCKING_ON_STREAM_BUFFER_SEND + #define traceBLOCKING_ON_STREAM_BUFFER_SEND( xStreamBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_SEND + #define traceSTREAM_BUFFER_SEND( xStreamBuffer, xBytesSent ) +#endif + +#ifndef traceSTREAM_BUFFER_SEND_FAILED + #define traceSTREAM_BUFFER_SEND_FAILED( xStreamBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_SEND_FROM_ISR + #define traceSTREAM_BUFFER_SEND_FROM_ISR( xStreamBuffer, xBytesSent ) +#endif + +#ifndef traceBLOCKING_ON_STREAM_BUFFER_RECEIVE + #define traceBLOCKING_ON_STREAM_BUFFER_RECEIVE( xStreamBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_RECEIVE + #define traceSTREAM_BUFFER_RECEIVE( xStreamBuffer, xReceivedLength ) +#endif + +#ifndef traceSTREAM_BUFFER_RECEIVE_FAILED + #define traceSTREAM_BUFFER_RECEIVE_FAILED( xStreamBuffer ) +#endif + +#ifndef traceSTREAM_BUFFER_RECEIVE_FROM_ISR + #define traceSTREAM_BUFFER_RECEIVE_FROM_ISR( xStreamBuffer, xReceivedLength ) +#endif + +#ifndef configGENERATE_RUN_TIME_STATS + #define configGENERATE_RUN_TIME_STATS 0 +#endif + +#if ( configGENERATE_RUN_TIME_STATS == 1 ) + + #ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS + #error If configGENERATE_RUN_TIME_STATS is defined then portCONFIGURE_TIMER_FOR_RUN_TIME_STATS must also be defined. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS should call a port layer function to setup a peripheral timer/counter that can then be used as the run time counter time base. + #endif /* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS */ + + #ifndef portGET_RUN_TIME_COUNTER_VALUE + #ifndef portALT_GET_RUN_TIME_COUNTER_VALUE + #error If configGENERATE_RUN_TIME_STATS is defined then either portGET_RUN_TIME_COUNTER_VALUE or portALT_GET_RUN_TIME_COUNTER_VALUE must also be defined. See the examples provided and the FreeRTOS web site for more information. + #endif /* portALT_GET_RUN_TIME_COUNTER_VALUE */ + #endif /* portGET_RUN_TIME_COUNTER_VALUE */ + +#endif /* configGENERATE_RUN_TIME_STATS */ + +#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS + #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() +#endif + +#ifndef configUSE_MALLOC_FAILED_HOOK + #define configUSE_MALLOC_FAILED_HOOK 0 +#endif + +#ifndef portPRIVILEGE_BIT + #define portPRIVILEGE_BIT ( ( UBaseType_t ) 0x00 ) +#endif + +#ifndef portYIELD_WITHIN_API + #define portYIELD_WITHIN_API portYIELD +#endif + +#ifndef portSUPPRESS_TICKS_AND_SLEEP + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) +#endif + +#ifndef configEXPECTED_IDLE_TIME_BEFORE_SLEEP + #define configEXPECTED_IDLE_TIME_BEFORE_SLEEP 2 +#endif + +#if configEXPECTED_IDLE_TIME_BEFORE_SLEEP < 2 + #error configEXPECTED_IDLE_TIME_BEFORE_SLEEP must not be less than 2 +#endif + +#ifndef configUSE_TICKLESS_IDLE + #define configUSE_TICKLESS_IDLE 0 +#endif + +#ifndef configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING + #define configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING( x ) +#endif + +#ifndef configPRE_SLEEP_PROCESSING + #define configPRE_SLEEP_PROCESSING( x ) +#endif + +#ifndef configPOST_SLEEP_PROCESSING + #define configPOST_SLEEP_PROCESSING( x ) +#endif + +#ifndef configUSE_QUEUE_SETS + #define configUSE_QUEUE_SETS 0 +#endif + +#ifndef portTASK_USES_FLOATING_POINT + #define portTASK_USES_FLOATING_POINT() +#endif + +#ifndef portALLOCATE_SECURE_CONTEXT + #define portALLOCATE_SECURE_CONTEXT( ulSecureStackSize ) +#endif + +#ifndef portDONT_DISCARD + #define portDONT_DISCARD +#endif + +#ifndef configUSE_TIME_SLICING + #define configUSE_TIME_SLICING 1 +#endif + +#ifndef configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS + #define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0 +#endif + +#ifndef configUSE_STATS_FORMATTING_FUNCTIONS + #define configUSE_STATS_FORMATTING_FUNCTIONS 0 +#endif + +#ifndef portASSERT_IF_INTERRUPT_PRIORITY_INVALID + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() +#endif + +#ifndef configUSE_TRACE_FACILITY + #define configUSE_TRACE_FACILITY 0 +#endif + +#ifndef mtCOVERAGE_TEST_MARKER + #define mtCOVERAGE_TEST_MARKER() +#endif + +#ifndef mtCOVERAGE_TEST_DELAY + #define mtCOVERAGE_TEST_DELAY() +#endif + +#ifndef portASSERT_IF_IN_ISR + #define portASSERT_IF_IN_ISR() +#endif + +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#endif + +#ifndef configAPPLICATION_ALLOCATED_HEAP + #define configAPPLICATION_ALLOCATED_HEAP 0 +#endif + +#ifndef configUSE_TASK_NOTIFICATIONS + #define configUSE_TASK_NOTIFICATIONS 1 +#endif + +#ifndef configUSE_POSIX_ERRNO + #define configUSE_POSIX_ERRNO 0 +#endif + +#ifndef portTICK_TYPE_IS_ATOMIC + #define portTICK_TYPE_IS_ATOMIC 0 +#endif + +#ifndef configSUPPORT_STATIC_ALLOCATION + /* Defaults to 0 for backward compatibility. */ + #define configSUPPORT_STATIC_ALLOCATION 0 +#endif + +#ifndef configSUPPORT_DYNAMIC_ALLOCATION + /* Defaults to 1 for backward compatibility. */ + #define configSUPPORT_DYNAMIC_ALLOCATION 1 +#endif + +#ifndef configSTACK_DEPTH_TYPE + /* Defaults to uint16_t for backward compatibility, but can be overridden + in FreeRTOSConfig.h if uint16_t is too restrictive. */ + #define configSTACK_DEPTH_TYPE uint16_t +#endif + +#ifndef configMESSAGE_BUFFER_LENGTH_TYPE + /* Defaults to size_t for backward compatibility, but can be overridden + in FreeRTOSConfig.h if lengths will always be less than the number of bytes + in a size_t. */ + #define configMESSAGE_BUFFER_LENGTH_TYPE size_t +#endif + +/* Sanity check the configuration. */ +#if( configUSE_TICKLESS_IDLE != 0 ) + #if( INCLUDE_vTaskSuspend != 1 ) + #error INCLUDE_vTaskSuspend must be set to 1 if configUSE_TICKLESS_IDLE is not set to 0 + #endif /* INCLUDE_vTaskSuspend */ +#endif /* configUSE_TICKLESS_IDLE */ + +#if( ( configSUPPORT_STATIC_ALLOCATION == 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 0 ) ) + #error configSUPPORT_STATIC_ALLOCATION and configSUPPORT_DYNAMIC_ALLOCATION cannot both be 0, but can both be 1. +#endif + +#if( ( configUSE_RECURSIVE_MUTEXES == 1 ) && ( configUSE_MUTEXES != 1 ) ) + #error configUSE_MUTEXES must be set to 1 to use recursive mutexes +#endif + +#ifndef configINITIAL_TICK_COUNT + #define configINITIAL_TICK_COUNT 0 +#endif + +#if( portTICK_TYPE_IS_ATOMIC == 0 ) + /* Either variables of tick type cannot be read atomically, or + portTICK_TYPE_IS_ATOMIC was not set - map the critical sections used when + the tick count is returned to the standard critical section macros. */ + #define portTICK_TYPE_ENTER_CRITICAL() portENTER_CRITICAL() + #define portTICK_TYPE_EXIT_CRITICAL() portEXIT_CRITICAL() + #define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() portSET_INTERRUPT_MASK_FROM_ISR() + #define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) portCLEAR_INTERRUPT_MASK_FROM_ISR( ( x ) ) +#else + /* The tick type can be read atomically, so critical sections used when the + tick count is returned can be defined away. */ + #define portTICK_TYPE_ENTER_CRITICAL() + #define portTICK_TYPE_EXIT_CRITICAL() + #define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() 0 + #define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) ( void ) x +#endif + +/* Definitions to allow backward compatibility with FreeRTOS versions prior to +V8 if desired. */ +#ifndef configENABLE_BACKWARD_COMPATIBILITY + #define configENABLE_BACKWARD_COMPATIBILITY 1 +#endif + +#ifndef configPRINTF + /* configPRINTF() was not defined, so define it away to nothing. To use + configPRINTF() then define it as follows (where MyPrintFunction() is + provided by the application writer): + + void MyPrintFunction(const char *pcFormat, ... ); + #define configPRINTF( X ) MyPrintFunction X + + Then call like a standard printf() function, but placing brackets around + all parameters so they are passed as a single parameter. For example: + configPRINTF( ("Value = %d", MyVariable) ); */ + #define configPRINTF( X ) +#endif + +#ifndef configMAX + /* The application writer has not provided their own MAX macro, so define + the following generic implementation. */ + #define configMAX( a, b ) ( ( ( a ) > ( b ) ) ? ( a ) : ( b ) ) +#endif + +#ifndef configMIN + /* The application writer has not provided their own MAX macro, so define + the following generic implementation. */ + #define configMIN( a, b ) ( ( ( a ) < ( b ) ) ? ( a ) : ( b ) ) +#endif + +#if configENABLE_BACKWARD_COMPATIBILITY == 1 + #define eTaskStateGet eTaskGetState + #define portTickType TickType_t + #define xTaskHandle TaskHandle_t + #define xQueueHandle QueueHandle_t + #define xSemaphoreHandle SemaphoreHandle_t + #define xQueueSetHandle QueueSetHandle_t + #define xQueueSetMemberHandle QueueSetMemberHandle_t + #define xTimeOutType TimeOut_t + #define xMemoryRegion MemoryRegion_t + #define xTaskParameters TaskParameters_t + #define xTaskStatusType TaskStatus_t + #define xTimerHandle TimerHandle_t + #define xCoRoutineHandle CoRoutineHandle_t + #define pdTASK_HOOK_CODE TaskHookFunction_t + #define portTICK_RATE_MS portTICK_PERIOD_MS + #define pcTaskGetTaskName pcTaskGetName + #define pcTimerGetTimerName pcTimerGetName + #define pcQueueGetQueueName pcQueueGetName + #define vTaskGetTaskInfo vTaskGetInfo + #define xTaskGetIdleRunTimeCounter ulTaskGetIdleRunTimeCounter + + /* Backward compatibility within the scheduler code only - these definitions + are not really required but are included for completeness. */ + #define tmrTIMER_CALLBACK TimerCallbackFunction_t + #define pdTASK_CODE TaskFunction_t + #define xListItem ListItem_t + #define xList List_t + + /* For libraries that break the list data hiding, and access list structure + members directly (which is not supposed to be done). */ + #define pxContainer pvContainer +#endif /* configENABLE_BACKWARD_COMPATIBILITY */ + +#if( configUSE_ALTERNATIVE_API != 0 ) + #error The alternative API was deprecated some time ago, and was removed in FreeRTOS V9.0 0 +#endif + +/* Set configUSE_TASK_FPU_SUPPORT to 0 to omit floating point support even +if floating point hardware is otherwise supported by the FreeRTOS port in use. +This constant is not supported by all FreeRTOS ports that include floating +point support. */ +#ifndef configUSE_TASK_FPU_SUPPORT + #define configUSE_TASK_FPU_SUPPORT 1 +#endif + +/* Set configENABLE_MPU to 1 to enable MPU support and 0 to disable it. This is +currently used in ARMv8M ports. */ +#ifndef configENABLE_MPU + #define configENABLE_MPU 0 +#endif + +/* Set configENABLE_FPU to 1 to enable FPU support and 0 to disable it. This is +currently used in ARMv8M ports. */ +#ifndef configENABLE_FPU + #define configENABLE_FPU 1 +#endif + +/* Set configENABLE_TRUSTZONE to 1 enable TrustZone support and 0 to disable it. +This is currently used in ARMv8M ports. */ +#ifndef configENABLE_TRUSTZONE + #define configENABLE_TRUSTZONE 1 +#endif + +/* Set configRUN_FREERTOS_SECURE_ONLY to 1 to run the FreeRTOS ARMv8M port on +the Secure Side only. */ +#ifndef configRUN_FREERTOS_SECURE_ONLY + #define configRUN_FREERTOS_SECURE_ONLY 0 +#endif + +/* Sometimes the FreeRTOSConfig.h settings only allow a task to be created using + * dynamically allocated RAM, in which case when any task is deleted it is known + * that both the task's stack and TCB need to be freed. Sometimes the + * FreeRTOSConfig.h settings only allow a task to be created using statically + * allocated RAM, in which case when any task is deleted it is known that neither + * the task's stack or TCB should be freed. Sometimes the FreeRTOSConfig.h + * settings allow a task to be created using either statically or dynamically + * allocated RAM, in which case a member of the TCB is used to record whether the + * stack and/or TCB were allocated statically or dynamically, so when a task is + * deleted the RAM that was allocated dynamically is freed again and no attempt is + * made to free the RAM that was allocated statically. + * tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE is only true if it is possible for a + * task to be created using either statically or dynamically allocated RAM. Note + * that if portUSING_MPU_WRAPPERS is 1 then a protected task can be created with + * a statically allocated stack and a dynamically allocated TCB. + * + * The following table lists various combinations of portUSING_MPU_WRAPPERS, + * configSUPPORT_DYNAMIC_ALLOCATION and configSUPPORT_STATIC_ALLOCATION and + * when it is possible to have both static and dynamic allocation: + * +-----+---------+--------+-----------------------------+-----------------------------------+------------------+-----------+ + * | MPU | Dynamic | Static | Available Functions | Possible Allocations | Both Dynamic and | Need Free | + * | | | | | | Static Possible | | + * +-----+---------+--------+-----------------------------+-----------------------------------+------------------+-----------+ + * | 0 | 0 | 1 | xTaskCreateStatic | TCB - Static, Stack - Static | No | No | + * +-----|---------|--------|-----------------------------|-----------------------------------|------------------|-----------| + * | 0 | 1 | 0 | xTaskCreate | TCB - Dynamic, Stack - Dynamic | No | Yes | + * +-----|---------|--------|-----------------------------|-----------------------------------|------------------|-----------| + * | 0 | 1 | 1 | xTaskCreate, | 1. TCB - Dynamic, Stack - Dynamic | Yes | Yes | + * | | | | xTaskCreateStatic | 2. TCB - Static, Stack - Static | | | + * +-----|---------|--------|-----------------------------|-----------------------------------|------------------|-----------| + * | 1 | 0 | 1 | xTaskCreateStatic, | TCB - Static, Stack - Static | No | No | + * | | | | xTaskCreateRestrictedStatic | | | | + * +-----|---------|--------|-----------------------------|-----------------------------------|------------------|-----------| + * | 1 | 1 | 0 | xTaskCreate, | 1. TCB - Dynamic, Stack - Dynamic | Yes | Yes | + * | | | | xTaskCreateRestricted | 2. TCB - Dynamic, Stack - Static | | | + * +-----|---------|--------|-----------------------------|-----------------------------------|------------------|-----------| + * | 1 | 1 | 1 | xTaskCreate, | 1. TCB - Dynamic, Stack - Dynamic | Yes | Yes | + * | | | | xTaskCreateStatic, | 2. TCB - Dynamic, Stack - Static | | | + * | | | | xTaskCreateRestricted, | 3. TCB - Static, Stack - Static | | | + * | | | | xTaskCreateRestrictedStatic | | | | + * +-----+---------+--------+-----------------------------+-----------------------------------+------------------+-----------+ + */ +#define tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE ( ( ( portUSING_MPU_WRAPPERS == 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) ) || \ + ( ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) ) + +/* + * In line with software engineering best practice, FreeRTOS implements a strict + * data hiding policy, so the real structures used by FreeRTOS to maintain the + * state of tasks, queues, semaphores, etc. are not accessible to the application + * code. However, if the application writer wants to statically allocate such + * an object then the size of the object needs to be know. Dummy structures + * that are guaranteed to have the same size and alignment requirements of the + * real objects are used for this purpose. The dummy list and list item + * structures below are used for inclusion in such a dummy structure. + */ +struct xSTATIC_LIST_ITEM +{ + #if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 1 ) + TickType_t xDummy1; + #endif + TickType_t xDummy2; + void *pvDummy3[ 4 ]; + #if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 1 ) + TickType_t xDummy4; + #endif +}; +typedef struct xSTATIC_LIST_ITEM StaticListItem_t; + +/* See the comments above the struct xSTATIC_LIST_ITEM definition. */ +struct xSTATIC_MINI_LIST_ITEM +{ + #if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 1 ) + TickType_t xDummy1; + #endif + TickType_t xDummy2; + void *pvDummy3[ 2 ]; +}; +typedef struct xSTATIC_MINI_LIST_ITEM StaticMiniListItem_t; + +/* See the comments above the struct xSTATIC_LIST_ITEM definition. */ +typedef struct xSTATIC_LIST +{ + #if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 1 ) + TickType_t xDummy1; + #endif + UBaseType_t uxDummy2; + void *pvDummy3; + StaticMiniListItem_t xDummy4; + #if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 1 ) + TickType_t xDummy5; + #endif +} StaticList_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the Task structure used internally by + * FreeRTOS is not accessible to application code. However, if the application + * writer wants to statically allocate the memory required to create a task then + * the size of the task object needs to be know. The StaticTask_t structure + * below is provided for this purpose. Its sizes and alignment requirements are + * guaranteed to match those of the genuine structure, no matter which + * architecture is being used, and no matter how the values in FreeRTOSConfig.h + * are set. Its contents are somewhat obfuscated in the hope users will + * recognise that it would be unwise to make direct use of the structure members. + */ +typedef struct xSTATIC_TCB +{ + void *pxDummy1; + #if ( portUSING_MPU_WRAPPERS == 1 ) + xMPU_SETTINGS xDummy2; + #endif + StaticListItem_t xDummy3[ 2 ]; + UBaseType_t uxDummy5; + void *pxDummy6; + uint8_t ucDummy7[ configMAX_TASK_NAME_LEN ]; + #if ( ( portSTACK_GROWTH > 0 ) || ( configRECORD_STACK_HIGH_ADDRESS == 1 ) ) + void *pxDummy8; + #endif + #if ( portCRITICAL_NESTING_IN_TCB == 1 ) + UBaseType_t uxDummy9; + #endif + #if ( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy10[ 2 ]; + #endif + #if ( configUSE_MUTEXES == 1 ) + UBaseType_t uxDummy12[ 2 ]; + #endif + #if ( configUSE_APPLICATION_TASK_TAG == 1 ) + void *pxDummy14; + #endif + #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 ) + void *pvDummy15[ configNUM_THREAD_LOCAL_STORAGE_POINTERS ]; + #endif + #if ( configGENERATE_RUN_TIME_STATS == 1 ) + uint32_t ulDummy16; + #endif + #if ( configUSE_NEWLIB_REENTRANT == 1 ) + struct _reent xDummy17; + #endif + #if ( configUSE_TASK_NOTIFICATIONS == 1 ) + uint32_t ulDummy18; + uint8_t ucDummy19; + #endif + #if ( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) + uint8_t uxDummy20; + #endif + + #if( INCLUDE_xTaskAbortDelay == 1 ) + uint8_t ucDummy21; + #endif + #if ( configUSE_POSIX_ERRNO == 1 ) + int iDummy22; + #endif +} StaticTask_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the Queue structure used internally by + * FreeRTOS is not accessible to application code. However, if the application + * writer wants to statically allocate the memory required to create a queue + * then the size of the queue object needs to be know. The StaticQueue_t + * structure below is provided for this purpose. Its sizes and alignment + * requirements are guaranteed to match those of the genuine structure, no + * matter which architecture is being used, and no matter how the values in + * FreeRTOSConfig.h are set. Its contents are somewhat obfuscated in the hope + * users will recognise that it would be unwise to make direct use of the + * structure members. + */ +typedef struct xSTATIC_QUEUE +{ + void *pvDummy1[ 3 ]; + + union + { + void *pvDummy2; + UBaseType_t uxDummy2; + } u; + + StaticList_t xDummy3[ 2 ]; + UBaseType_t uxDummy4[ 3 ]; + uint8_t ucDummy5[ 2 ]; + + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t ucDummy6; + #endif + + #if ( configUSE_QUEUE_SETS == 1 ) + void *pvDummy7; + #endif + + #if ( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy8; + uint8_t ucDummy9; + #endif + +} StaticQueue_t; +typedef StaticQueue_t StaticSemaphore_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the event group structure used + * internally by FreeRTOS is not accessible to application code. However, if + * the application writer wants to statically allocate the memory required to + * create an event group then the size of the event group object needs to be + * know. The StaticEventGroup_t structure below is provided for this purpose. + * Its sizes and alignment requirements are guaranteed to match those of the + * genuine structure, no matter which architecture is being used, and no matter + * how the values in FreeRTOSConfig.h are set. Its contents are somewhat + * obfuscated in the hope users will recognise that it would be unwise to make + * direct use of the structure members. + */ +typedef struct xSTATIC_EVENT_GROUP +{ + TickType_t xDummy1; + StaticList_t xDummy2; + + #if( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy3; + #endif + + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t ucDummy4; + #endif + +} StaticEventGroup_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the software timer structure used + * internally by FreeRTOS is not accessible to application code. However, if + * the application writer wants to statically allocate the memory required to + * create a software timer then the size of the queue object needs to be know. + * The StaticTimer_t structure below is provided for this purpose. Its sizes + * and alignment requirements are guaranteed to match those of the genuine + * structure, no matter which architecture is being used, and no matter how the + * values in FreeRTOSConfig.h are set. Its contents are somewhat obfuscated in + * the hope users will recognise that it would be unwise to make direct use of + * the structure members. + */ +typedef struct xSTATIC_TIMER +{ + void *pvDummy1; + StaticListItem_t xDummy2; + TickType_t xDummy3; + void *pvDummy5; + TaskFunction_t pvDummy6; + #if( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy7; + #endif + uint8_t ucDummy8; + +} StaticTimer_t; + +/* +* In line with software engineering best practice, especially when supplying a +* library that is likely to change in future versions, FreeRTOS implements a +* strict data hiding policy. This means the stream buffer structure used +* internally by FreeRTOS is not accessible to application code. However, if +* the application writer wants to statically allocate the memory required to +* create a stream buffer then the size of the stream buffer object needs to be +* know. The StaticStreamBuffer_t structure below is provided for this purpose. +* Its size and alignment requirements are guaranteed to match those of the +* genuine structure, no matter which architecture is being used, and no matter +* how the values in FreeRTOSConfig.h are set. Its contents are somewhat +* obfuscated in the hope users will recognise that it would be unwise to make +* direct use of the structure members. +*/ +typedef struct xSTATIC_STREAM_BUFFER +{ + size_t uxDummy1[ 4 ]; + void * pvDummy2[ 3 ]; + uint8_t ucDummy3; + #if ( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy4; + #endif +} StaticStreamBuffer_t; + +/* Message buffers are built on stream buffers. */ +typedef StaticStreamBuffer_t StaticMessageBuffer_t; + +#ifdef __cplusplus +} +#endif + +#endif /* INC_FREERTOS_H */ + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOSConfig_template.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOSConfig_template.h new file mode 100644 index 0000000..c28791d --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOSConfig_template.h @@ -0,0 +1,162 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * this is a template configuration files + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * These parameters and more are described within the 'configuration' section of the + * FreeRTOS API documentation available on the FreeRTOS.org web site. + * + * See http://www.freertos.org/a00110.html + *----------------------------------------------------------*/ + +/* Ensure stdint is only used by the compiler, and not the assembler. */ +#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__) + #include + extern uint32_t SystemCoreClock; +#endif + +/* CMSIS-RTOSv2 defines 56 levels of priorities. To be able to use them + * all and avoid application misbehavior, configUSE_PORT_OPTIMISED_TASK_SELECTION + * must be set to 0 and configMAX_PRIORITIES to 56 + * + */ +/* #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0*/ +/* #define configMAX_PRIORITIES ( 56 ) */ +#define configUSE_PREEMPTION 1 +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configMAX_PRIORITIES (7) +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configCPU_CLOCK_HZ (SystemCoreClock) +#define configTICK_RATE_HZ ((TickType_t)1000) +#define configMINIMAL_STACK_SIZE ((uint16_t)128) +#define configTOTAL_HEAP_SIZE ((size_t)(15 * 1024)) +#define configMAX_TASK_NAME_LEN (16) +#define configUSE_TRACE_FACILITY 1 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configQUEUE_REGISTRY_SIZE 8 +#define configCHECK_FOR_STACK_OVERFLOW 0 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configUSE_APPLICATION_TASK_TAG 0 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configGENERATE_RUN_TIME_STATS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES (2) + +/* Software timer definitions. */ +#define configUSE_TIMERS 0 +#define configTIMER_TASK_PRIORITY (2) +#define configTIMER_QUEUE_LENGTH 10 +#define configTIMER_TASK_STACK_DEPTH (configMINIMAL_STACK_SIZE * 2) + +/* Set the following definitions to 1 to include the API function, or zero +to exclude the API function. */ +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 0 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 0 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 1 + +/*------------- CMSIS-RTOS V2 specific defines -----------*/ +/* When using CMSIS-RTOSv2 set configSUPPORT_STATIC_ALLOCATION to 1 + * is mandatory to avoid compile errors. + * CMSIS-RTOS V2 implmentation requires the following defines + * +#define configSUPPORT_STATIC_ALLOCATION 1 <-- cmsis_os threads are created using xTaskCreateStatic() API +#define configMAX_PRIORITIES (56) <-- Priority range in CMSIS-RTOS V2 is [0 .. 56] +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 <-- when set to 1, configMAX_PRIORITIES can't be more than 32 which is not suitable for the new CMSIS-RTOS v2 priority range +*/ + +/* the CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used + * by the application thus the correct define need to be enabled from the list + * below + * +//define USE_FreeRTOS_HEAP_1 +//define USE_FreeRTOS_HEAP_2 +//define USE_FreeRTOS_HEAP_3 +//define USE_FreeRTOS_HEAP_4 +//define USE_FreeRTOS_HEAP_5 + +*/ + + +/* Cortex-M specific definitions. */ +#ifdef __NVIC_PRIO_BITS + /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */ + #define configPRIO_BITS __NVIC_PRIO_BITS +#else + #define configPRIO_BITS 4 /* 15 priority levels */ +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" +function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 0xf + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* Normal assert() semantics without relying on the provision of an assert.h +header file. */ +#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); } + +/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS + standard names. */ +#define vPortSVCHandler SVC_Handler +#define xPortPendSVHandler PendSV_Handler + +/* IMPORTANT: FreeRTOS is using the SysTick as internal time base, thus make sure the system and peripherials are + using a different time base (TIM based for example). + */ +#define xPortSysTickHandler SysTick_Handler + +#endif /* FREERTOS_CONFIG_H */ + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h new file mode 100644 index 0000000..ac94611 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h @@ -0,0 +1,133 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef STACK_MACROS_H +#define STACK_MACROS_H + +#ifndef _MSC_VER /* Visual Studio doesn't support #warning. */ + #warning The name of this file has changed to stack_macros.h. Please update your code accordingly. This source file (which has the original name) will be removed in future released. +#endif + +/* + * Call the stack overflow hook function if the stack of the task being swapped + * out is currently overflowed, or looks like it might have overflowed in the + * past. + * + * Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check + * the current stack state only - comparing the current top of stack value to + * the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1 + * will also cause the last few stack bytes to be checked to ensure the value + * to which the bytes were set when the task was created have not been + * overwritten. Note this second test does not guarantee that an overflowed + * stack will always be recognised. + */ + +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) ) + + /* Only the current stack state is to be checked. */ + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + /* Is the currently saved stack pointer within the stack limit? */ \ + if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */ +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) ) + + /* Only the current stack state is to be checked. */ + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + \ + /* Is the currently saved stack pointer within the stack limit? */ \ + if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */ +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) ) + + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \ + const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5; \ + \ + if( ( pulStack[ 0 ] != ulCheckValue ) || \ + ( pulStack[ 1 ] != ulCheckValue ) || \ + ( pulStack[ 2 ] != ulCheckValue ) || \ + ( pulStack[ 3 ] != ulCheckValue ) ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */ +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) ) + + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + int8_t *pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \ + static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \ + \ + \ + pcEndOfStack -= sizeof( ucExpectedStackBytes ); \ + \ + /* Has the extremity of the task stack ever been written over? */ \ + if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */ +/*-----------------------------------------------------------*/ + +/* Remove stack overflow macro if not being used. */ +#ifndef taskCHECK_FOR_STACK_OVERFLOW + #define taskCHECK_FOR_STACK_OVERFLOW() +#endif + + + +#endif /* STACK_MACROS_H */ + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/atomic.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/atomic.h new file mode 100644 index 0000000..795d801 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/atomic.h @@ -0,0 +1,414 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/** + * @file atomic.h + * @brief FreeRTOS atomic operation support. + * + * This file implements atomic functions by disabling interrupts globally. + * Implementations with architecture specific atomic instructions can be + * provided under each compiler directory. + */ + +#ifndef ATOMIC_H +#define ATOMIC_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h must appear in source files before include atomic.h" +#endif + +/* Standard includes. */ +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Port specific definitions -- entering/exiting critical section. + * Refer template -- ./lib/FreeRTOS/portable/Compiler/Arch/portmacro.h + * + * Every call to ATOMIC_EXIT_CRITICAL() must be closely paired with + * ATOMIC_ENTER_CRITICAL(). + * + */ +#if defined( portSET_INTERRUPT_MASK_FROM_ISR ) + + /* Nested interrupt scheme is supported in this port. */ + #define ATOMIC_ENTER_CRITICAL() \ + UBaseType_t uxCriticalSectionType = portSET_INTERRUPT_MASK_FROM_ISR() + + #define ATOMIC_EXIT_CRITICAL() \ + portCLEAR_INTERRUPT_MASK_FROM_ISR( uxCriticalSectionType ) + +#else + + /* Nested interrupt scheme is NOT supported in this port. */ + #define ATOMIC_ENTER_CRITICAL() portENTER_CRITICAL() + #define ATOMIC_EXIT_CRITICAL() portEXIT_CRITICAL() + +#endif /* portSET_INTERRUPT_MASK_FROM_ISR() */ + +/* + * Port specific definition -- "always inline". + * Inline is compiler specific, and may not always get inlined depending on your + * optimization level. Also, inline is considered as performance optimization + * for atomic. Thus, if portFORCE_INLINE is not provided by portmacro.h, + * instead of resulting error, simply define it away. + */ +#ifndef portFORCE_INLINE + #define portFORCE_INLINE +#endif + +#define ATOMIC_COMPARE_AND_SWAP_SUCCESS 0x1U /**< Compare and swap succeeded, swapped. */ +#define ATOMIC_COMPARE_AND_SWAP_FAILURE 0x0U /**< Compare and swap failed, did not swap. */ + +/*----------------------------- Swap && CAS ------------------------------*/ + +/** + * Atomic compare-and-swap + * + * @brief Performs an atomic compare-and-swap operation on the specified values. + * + * @param[in, out] pulDestination Pointer to memory location from where value is + * to be loaded and checked. + * @param[in] ulExchange If condition meets, write this value to memory. + * @param[in] ulComparand Swap condition. + * + * @return Unsigned integer of value 1 or 0. 1 for swapped, 0 for not swapped. + * + * @note This function only swaps *pulDestination with ulExchange, if previous + * *pulDestination value equals ulComparand. + */ +static portFORCE_INLINE uint32_t Atomic_CompareAndSwap_u32( uint32_t volatile * pulDestination, + uint32_t ulExchange, + uint32_t ulComparand ) +{ +uint32_t ulReturnValue; + + ATOMIC_ENTER_CRITICAL(); + { + if( *pulDestination == ulComparand ) + { + *pulDestination = ulExchange; + ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS; + } + else + { + ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE; + } + } + ATOMIC_EXIT_CRITICAL(); + + return ulReturnValue; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic swap (pointers) + * + * @brief Atomically sets the address pointed to by *ppvDestination to the value + * of *pvExchange. + * + * @param[in, out] ppvDestination Pointer to memory location from where a pointer + * value is to be loaded and written back to. + * @param[in] pvExchange Pointer value to be written to *ppvDestination. + * + * @return The initial value of *ppvDestination. + */ +static portFORCE_INLINE void * Atomic_SwapPointers_p32( void * volatile * ppvDestination, + void * pvExchange ) +{ +void * pReturnValue; + + ATOMIC_ENTER_CRITICAL(); + { + pReturnValue = *ppvDestination; + *ppvDestination = pvExchange; + } + ATOMIC_EXIT_CRITICAL(); + + return pReturnValue; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic compare-and-swap (pointers) + * + * @brief Performs an atomic compare-and-swap operation on the specified pointer + * values. + * + * @param[in, out] ppvDestination Pointer to memory location from where a pointer + * value is to be loaded and checked. + * @param[in] pvExchange If condition meets, write this value to memory. + * @param[in] pvComparand Swap condition. + * + * @return Unsigned integer of value 1 or 0. 1 for swapped, 0 for not swapped. + * + * @note This function only swaps *ppvDestination with pvExchange, if previous + * *ppvDestination value equals pvComparand. + */ +static portFORCE_INLINE uint32_t Atomic_CompareAndSwapPointers_p32( void * volatile * ppvDestination, + void * pvExchange, + void * pvComparand ) +{ +uint32_t ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE; + + ATOMIC_ENTER_CRITICAL(); + { + if( *ppvDestination == pvComparand ) + { + *ppvDestination = pvExchange; + ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS; + } + } + ATOMIC_EXIT_CRITICAL(); + + return ulReturnValue; +} + + +/*----------------------------- Arithmetic ------------------------------*/ + +/** + * Atomic add + * + * @brief Atomically adds count to the value of the specified pointer points to. + * + * @param[in,out] pulAddend Pointer to memory location from where value is to be + * loaded and written back to. + * @param[in] ulCount Value to be added to *pulAddend. + * + * @return previous *pulAddend value. + */ +static portFORCE_INLINE uint32_t Atomic_Add_u32( uint32_t volatile * pulAddend, + uint32_t ulCount ) +{ + uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulAddend; + *pulAddend += ulCount; + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic subtract + * + * @brief Atomically subtracts count from the value of the specified pointer + * pointers to. + * + * @param[in,out] pulAddend Pointer to memory location from where value is to be + * loaded and written back to. + * @param[in] ulCount Value to be subtract from *pulAddend. + * + * @return previous *pulAddend value. + */ +static portFORCE_INLINE uint32_t Atomic_Subtract_u32( uint32_t volatile * pulAddend, + uint32_t ulCount ) +{ + uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulAddend; + *pulAddend -= ulCount; + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic increment + * + * @brief Atomically increments the value of the specified pointer points to. + * + * @param[in,out] pulAddend Pointer to memory location from where value is to be + * loaded and written back to. + * + * @return *pulAddend value before increment. + */ +static portFORCE_INLINE uint32_t Atomic_Increment_u32( uint32_t volatile * pulAddend ) +{ +uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulAddend; + *pulAddend += 1; + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic decrement + * + * @brief Atomically decrements the value of the specified pointer points to + * + * @param[in,out] pulAddend Pointer to memory location from where value is to be + * loaded and written back to. + * + * @return *pulAddend value before decrement. + */ +static portFORCE_INLINE uint32_t Atomic_Decrement_u32( uint32_t volatile * pulAddend ) +{ +uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulAddend; + *pulAddend -= 1; + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} + +/*----------------------------- Bitwise Logical ------------------------------*/ + +/** + * Atomic OR + * + * @brief Performs an atomic OR operation on the specified values. + * + * @param [in, out] pulDestination Pointer to memory location from where value is + * to be loaded and written back to. + * @param [in] ulValue Value to be ORed with *pulDestination. + * + * @return The original value of *pulDestination. + */ +static portFORCE_INLINE uint32_t Atomic_OR_u32( uint32_t volatile * pulDestination, + uint32_t ulValue ) +{ +uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulDestination; + *pulDestination |= ulValue; + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic AND + * + * @brief Performs an atomic AND operation on the specified values. + * + * @param [in, out] pulDestination Pointer to memory location from where value is + * to be loaded and written back to. + * @param [in] ulValue Value to be ANDed with *pulDestination. + * + * @return The original value of *pulDestination. + */ +static portFORCE_INLINE uint32_t Atomic_AND_u32( uint32_t volatile * pulDestination, + uint32_t ulValue ) +{ +uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulDestination; + *pulDestination &= ulValue; + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic NAND + * + * @brief Performs an atomic NAND operation on the specified values. + * + * @param [in, out] pulDestination Pointer to memory location from where value is + * to be loaded and written back to. + * @param [in] ulValue Value to be NANDed with *pulDestination. + * + * @return The original value of *pulDestination. + */ +static portFORCE_INLINE uint32_t Atomic_NAND_u32( uint32_t volatile * pulDestination, + uint32_t ulValue ) +{ +uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulDestination; + *pulDestination = ~( ulCurrent & ulValue ); + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} +/*-----------------------------------------------------------*/ + +/** + * Atomic XOR + * + * @brief Performs an atomic XOR operation on the specified values. + * + * @param [in, out] pulDestination Pointer to memory location from where value is + * to be loaded and written back to. + * @param [in] ulValue Value to be XORed with *pulDestination. + * + * @return The original value of *pulDestination. + */ +static portFORCE_INLINE uint32_t Atomic_XOR_u32( uint32_t volatile * pulDestination, + uint32_t ulValue ) +{ +uint32_t ulCurrent; + + ATOMIC_ENTER_CRITICAL(); + { + ulCurrent = *pulDestination; + *pulDestination ^= ulValue; + } + ATOMIC_EXIT_CRITICAL(); + + return ulCurrent; +} + +#ifdef __cplusplus +} +#endif + +#endif /* ATOMIC_H */ diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h new file mode 100644 index 0000000..ed2c161 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h @@ -0,0 +1,720 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef CO_ROUTINE_H +#define CO_ROUTINE_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h must appear in source files before include croutine.h" +#endif + +#include "list.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* Used to hide the implementation of the co-routine control block. The +control block structure however has to be included in the header due to +the macro implementation of the co-routine functionality. */ +typedef void * CoRoutineHandle_t; + +/* Defines the prototype to which co-routine functions must conform. */ +typedef void (*crCOROUTINE_CODE)( CoRoutineHandle_t, UBaseType_t ); + +typedef struct corCoRoutineControlBlock +{ + crCOROUTINE_CODE pxCoRoutineFunction; + ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */ + ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */ + UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */ + UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */ + uint16_t uxState; /*< Used internally by the co-routine implementation. */ +} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */ + +/** + * croutine. h + *
+ BaseType_t xCoRoutineCreate(
+                                 crCOROUTINE_CODE pxCoRoutineCode,
+                                 UBaseType_t uxPriority,
+                                 UBaseType_t uxIndex
+                               );
+ * + * Create a new co-routine and add it to the list of co-routines that are + * ready to run. + * + * @param pxCoRoutineCode Pointer to the co-routine function. Co-routine + * functions require special syntax - see the co-routine section of the WEB + * documentation for more information. + * + * @param uxPriority The priority with respect to other co-routines at which + * the co-routine will run. + * + * @param uxIndex Used to distinguish between different co-routines that + * execute the same function. See the example below and the co-routine section + * of the WEB documentation for further information. + * + * @return pdPASS if the co-routine was successfully created and added to a ready + * list, otherwise an error code defined with ProjDefs.h. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ static const char cLedToFlash[ 2 ] = { 5, 6 };
+ static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+         // This co-routine just delays for a fixed period, then toggles
+         // an LED.  Two co-routines are created using this function, so
+         // the uxIndex parameter is used to tell the co-routine which
+         // LED to flash and how int32_t to delay.  This assumes xQueue has
+         // already been created.
+         vParTestToggleLED( cLedToFlash[ uxIndex ] );
+         crDELAY( xHandle, uxFlashRates[ uxIndex ] );
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+
+ // Function that creates two co-routines.
+ void vOtherFunction( void )
+ {
+ uint8_t ucParameterToPass;
+ TaskHandle_t xHandle;
+
+     // Create two co-routines at priority 0.  The first is given index 0
+     // so (from the code above) toggles LED 5 every 200 ticks.  The second
+     // is given index 1 so toggles LED 6 every 400 ticks.
+     for( uxIndex = 0; uxIndex < 2; uxIndex++ )
+     {
+         xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
+     }
+ }
+
+ * \defgroup xCoRoutineCreate xCoRoutineCreate + * \ingroup Tasks + */ +BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex ); + + +/** + * croutine. h + *
+ void vCoRoutineSchedule( void );
+ * + * Run a co-routine. + * + * vCoRoutineSchedule() executes the highest priority co-routine that is able + * to run. The co-routine will execute until it either blocks, yields or is + * preempted by a task. Co-routines execute cooperatively so one + * co-routine cannot be preempted by another, but can be preempted by a task. + * + * If an application comprises of both tasks and co-routines then + * vCoRoutineSchedule should be called from the idle task (in an idle task + * hook). + * + * Example usage: + 
+ // This idle task hook will schedule a co-routine each time it is called.
+ // The rest of the idle task will execute between co-routine calls.
+ void vApplicationIdleHook( void )
+ {
+	vCoRoutineSchedule();
+ }
+
+ // Alternatively, if you do not require any other part of the idle task to
+ // execute, the idle task hook can call vCoRoutineSchedule() within an
+ // infinite loop.
+ void vApplicationIdleHook( void )
+ {
+    for( ;; )
+    {
+        vCoRoutineSchedule();
+    }
+ }
+
+ * \defgroup vCoRoutineSchedule vCoRoutineSchedule + * \ingroup Tasks + */ +void vCoRoutineSchedule( void ); + +/** + * croutine. h + * 
+ crSTART( CoRoutineHandle_t xHandle );
+ * + * This macro MUST always be called at the start of a co-routine function. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static int32_t ulAVariable;
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+          // Co-routine functionality goes here.
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+ * \defgroup crSTART crSTART + * \ingroup Tasks + */ +#define crSTART( pxCRCB ) switch( ( ( CRCB_t * )( pxCRCB ) )->uxState ) { case 0: + +/** + * croutine. h + * 
+ crEND();
+ * + * This macro MUST always be called at the end of a co-routine function. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static int32_t ulAVariable;
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+          // Co-routine functionality goes here.
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+ * \defgroup crSTART crSTART + * \ingroup Tasks + */ +#define crEND() } + +/* + * These macros are intended for internal use by the co-routine implementation + * only. The macros should not be used directly by application writers. + */ +#define crSET_STATE0( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = (__LINE__ * 2); return; case (__LINE__ * 2): +#define crSET_STATE1( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1): + +/** + * croutine. h + *
+ crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );
+ * + * Delay a co-routine for a fixed period of time. + * + * crDELAY can only be called from the co-routine function itself - not + * from within a function called by the co-routine function. This is because + * co-routines do not maintain their own stack. + * + * @param xHandle The handle of the co-routine to delay. This is the xHandle + * parameter of the co-routine function. + * + * @param xTickToDelay The number of ticks that the co-routine should delay + * for. The actual amount of time this equates to is defined by + * configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_PERIOD_MS + * can be used to convert ticks to milliseconds. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ // We are to delay for 200ms.
+ static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+        // Delay for 200ms.
+        crDELAY( xHandle, xDelayTime );
+
+        // Do something here.
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+ * \defgroup crDELAY crDELAY + * \ingroup Tasks + */ +#define crDELAY( xHandle, xTicksToDelay ) \ + if( ( xTicksToDelay ) > 0 ) \ + { \ + vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \ + } \ + crSET_STATE0( ( xHandle ) ); + +/** + * 
+ crQUEUE_SEND(
+                  CoRoutineHandle_t xHandle,
+                  QueueHandle_t pxQueue,
+                  void *pvItemToQueue,
+                  TickType_t xTicksToWait,
+                  BaseType_t *pxResult
+             )
+ * + * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine + * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks. + * + * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas + * xQueueSend() and xQueueReceive() can only be used from tasks. + * + * crQUEUE_SEND can only be called from the co-routine function itself - not + * from within a function called by the co-routine function. This is because + * co-routines do not maintain their own stack. + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xHandle The handle of the calling co-routine. This is the xHandle + * parameter of the co-routine function. + * + * @param pxQueue The handle of the queue on which the data will be posted. + * The handle is obtained as the return value when the queue is created using + * the xQueueCreate() API function. + * + * @param pvItemToQueue A pointer to the data being posted onto the queue. + * The number of bytes of each queued item is specified when the queue is + * created. This number of bytes is copied from pvItemToQueue into the queue + * itself. + * + * @param xTickToDelay The number of ticks that the co-routine should block + * to wait for space to become available on the queue, should space not be + * available immediately. The actual amount of time this equates to is defined + * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant + * portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see example + * below). + * + * @param pxResult The variable pointed to by pxResult will be set to pdPASS if + * data was successfully posted onto the queue, otherwise it will be set to an + * error defined within ProjDefs.h. + * + * Example usage: + 
+ // Co-routine function that blocks for a fixed period then posts a number onto
+ // a queue.
+ static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static BaseType_t xNumberToPost = 0;
+ static BaseType_t xResult;
+
+    // Co-routines must begin with a call to crSTART().
+    crSTART( xHandle );
+
+    for( ;; )
+    {
+        // This assumes the queue has already been created.
+        crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
+
+        if( xResult != pdPASS )
+        {
+            // The message was not posted!
+        }
+
+        // Increment the number to be posted onto the queue.
+        xNumberToPost++;
+
+        // Delay for 100 ticks.
+        crDELAY( xHandle, 100 );
+    }
+
+    // Co-routines must end with a call to crEND().
+    crEND();
+ }
+ * \defgroup crQUEUE_SEND crQUEUE_SEND + * \ingroup Tasks + */ +#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \ +{ \ + *( pxResult ) = xQueueCRSend( ( pxQueue) , ( pvItemToQueue) , ( xTicksToWait ) ); \ + if( *( pxResult ) == errQUEUE_BLOCKED ) \ + { \ + crSET_STATE0( ( xHandle ) ); \ + *pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \ + } \ + if( *pxResult == errQUEUE_YIELD ) \ + { \ + crSET_STATE1( ( xHandle ) ); \ + *pxResult = pdPASS; \ + } \ +} + +/** + * croutine. h + * 
+  crQUEUE_RECEIVE(
+                     CoRoutineHandle_t xHandle,
+                     QueueHandle_t pxQueue,
+                     void *pvBuffer,
+                     TickType_t xTicksToWait,
+                     BaseType_t *pxResult
+                 )
+ * + * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine + * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks. + * + * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas + * xQueueSend() and xQueueReceive() can only be used from tasks. + * + * crQUEUE_RECEIVE can only be called from the co-routine function itself - not + * from within a function called by the co-routine function. This is because + * co-routines do not maintain their own stack. + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xHandle The handle of the calling co-routine. This is the xHandle + * parameter of the co-routine function. + * + * @param pxQueue The handle of the queue from which the data will be received. + * The handle is obtained as the return value when the queue is created using + * the xQueueCreate() API function. + * + * @param pvBuffer The buffer into which the received item is to be copied. + * The number of bytes of each queued item is specified when the queue is + * created. This number of bytes is copied into pvBuffer. + * + * @param xTickToDelay The number of ticks that the co-routine should block + * to wait for data to become available from the queue, should data not be + * available immediately. The actual amount of time this equates to is defined + * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant + * portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see the + * crQUEUE_SEND example). + * + * @param pxResult The variable pointed to by pxResult will be set to pdPASS if + * data was successfully retrieved from the queue, otherwise it will be set to + * an error code as defined within ProjDefs.h. + * + * Example usage: + 
+ // A co-routine receives the number of an LED to flash from a queue.  It
+ // blocks on the queue until the number is received.
+ static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static BaseType_t xResult;
+ static UBaseType_t uxLEDToFlash;
+
+    // All co-routines must start with a call to crSTART().
+    crSTART( xHandle );
+
+    for( ;; )
+    {
+        // Wait for data to become available on the queue.
+        crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+        if( xResult == pdPASS )
+        {
+            // We received the LED to flash - flash it!
+            vParTestToggleLED( uxLEDToFlash );
+        }
+    }
+
+    crEND();
+ }
+ * \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE + * \ingroup Tasks + */ +#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \ +{ \ + *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), ( xTicksToWait ) ); \ + if( *( pxResult ) == errQUEUE_BLOCKED ) \ + { \ + crSET_STATE0( ( xHandle ) ); \ + *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), 0 ); \ + } \ + if( *( pxResult ) == errQUEUE_YIELD ) \ + { \ + crSET_STATE1( ( xHandle ) ); \ + *( pxResult ) = pdPASS; \ + } \ +} + +/** + * croutine. h + * 
+  crQUEUE_SEND_FROM_ISR(
+                            QueueHandle_t pxQueue,
+                            void *pvItemToQueue,
+                            BaseType_t xCoRoutinePreviouslyWoken
+                       )
+ * + * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the + * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR() + * functions used by tasks. + * + * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to + * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and + * xQueueReceiveFromISR() can only be used to pass data between a task and and + * ISR. + * + * crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue + * that is being used from within a co-routine. + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto + * the same queue multiple times from a single interrupt. The first call + * should always pass in pdFALSE. Subsequent calls should pass in + * the value returned from the previous call. + * + * @return pdTRUE if a co-routine was woken by posting onto the queue. This is + * used by the ISR to determine if a context switch may be required following + * the ISR. + * + * Example usage: + 
+ // A co-routine that blocks on a queue waiting for characters to be received.
+ static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ char cRxedChar;
+ BaseType_t xResult;
+
+     // All co-routines must start with a call to crSTART().
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+         // Wait for data to become available on the queue.  This assumes the
+         // queue xCommsRxQueue has already been created!
+         crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+         // Was a character received?
+         if( xResult == pdPASS )
+         {
+             // Process the character here.
+         }
+     }
+
+     // All co-routines must end with a call to crEND().
+     crEND();
+ }
+
+ // An ISR that uses a queue to send characters received on a serial port to
+ // a co-routine.
+ void vUART_ISR( void )
+ {
+ char cRxedChar;
+ BaseType_t xCRWokenByPost = pdFALSE;
+
+     // We loop around reading characters until there are none left in the UART.
+     while( UART_RX_REG_NOT_EMPTY() )
+     {
+         // Obtain the character from the UART.
+         cRxedChar = UART_RX_REG;
+
+         // Post the character onto a queue.  xCRWokenByPost will be pdFALSE
+         // the first time around the loop.  If the post causes a co-routine
+         // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
+         // In this manner we can ensure that if more than one co-routine is
+         // blocked on the queue only one is woken by this ISR no matter how
+         // many characters are posted to the queue.
+         xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
+     }
+ }
+ * \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR + * \ingroup Tasks + */ +#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) ) + + +/** + * croutine. h + * 
+  crQUEUE_SEND_FROM_ISR(
+                            QueueHandle_t pxQueue,
+                            void *pvBuffer,
+                            BaseType_t * pxCoRoutineWoken
+                       )
+ * + * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the + * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR() + * functions used by tasks. + * + * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to + * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and + * xQueueReceiveFromISR() can only be used to pass data between a task and and + * ISR. + * + * crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data + * from a queue that is being used from within a co-routine (a co-routine + * posted to the queue). + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvBuffer A pointer to a buffer into which the received item will be + * placed. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from the queue into + * pvBuffer. + * + * @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become + * available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a + * co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise + * *pxCoRoutineWoken will remain unchanged. + * + * @return pdTRUE an item was successfully received from the queue, otherwise + * pdFALSE. + * + * Example usage: + 
+ // A co-routine that posts a character to a queue then blocks for a fixed
+ // period.  The character is incremented each time.
+ static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // cChar holds its value while this co-routine is blocked and must therefore
+ // be declared static.
+ static char cCharToTx = 'a';
+ BaseType_t xResult;
+
+     // All co-routines must start with a call to crSTART().
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+         // Send the next character to the queue.
+         crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
+
+         if( xResult == pdPASS )
+         {
+             // The character was successfully posted to the queue.
+         }
+		 else
+		 {
+			// Could not post the character to the queue.
+		 }
+
+         // Enable the UART Tx interrupt to cause an interrupt in this
+		 // hypothetical UART.  The interrupt will obtain the character
+		 // from the queue and send it.
+		 ENABLE_RX_INTERRUPT();
+
+		 // Increment to the next character then block for a fixed period.
+		 // cCharToTx will maintain its value across the delay as it is
+		 // declared static.
+		 cCharToTx++;
+		 if( cCharToTx > 'x' )
+		 {
+			cCharToTx = 'a';
+		 }
+		 crDELAY( 100 );
+     }
+
+     // All co-routines must end with a call to crEND().
+     crEND();
+ }
+
+ // An ISR that uses a queue to receive characters to send on a UART.
+ void vUART_ISR( void )
+ {
+ char cCharToTx;
+ BaseType_t xCRWokenByPost = pdFALSE;
+
+     while( UART_TX_REG_EMPTY() )
+     {
+         // Are there any characters in the queue waiting to be sent?
+		 // xCRWokenByPost will automatically be set to pdTRUE if a co-routine
+		 // is woken by the post - ensuring that only a single co-routine is
+		 // woken no matter how many times we go around this loop.
+         if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
+		 {
+			 SEND_CHARACTER( cCharToTx );
+		 }
+     }
+ }
+ * \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR + * \ingroup Tasks + */ +#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) ) + +/* + * This function is intended for internal use by the co-routine macros only. + * The macro nature of the co-routine implementation requires that the + * prototype appears here. The function should not be used by application + * writers. + * + * Removes the current co-routine from its ready list and places it in the + * appropriate delayed list. + */ +void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList ); + +/* + * This function is intended for internal use by the queue implementation only. + * The function should not be used by application writers. + * + * Removes the highest priority co-routine from the event list and places it in + * the pending ready list. + */ +BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList ); + +#ifdef __cplusplus +} +#endif + +#endif /* CO_ROUTINE_H */ diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h new file mode 100644 index 0000000..e048e6c --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h @@ -0,0 +1,279 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef DEPRECATED_DEFINITIONS_H +#define DEPRECATED_DEFINITIONS_H + + +/* Each FreeRTOS port has a unique portmacro.h header file. Originally a +pre-processor definition was used to ensure the pre-processor found the correct +portmacro.h file for the port being used. That scheme was deprecated in favour +of setting the compiler's include path such that it found the correct +portmacro.h file - removing the need for the constant and allowing the +portmacro.h file to be located anywhere in relation to the port being used. The +definitions below remain in the code for backward compatibility only. New +projects should not use them. */ + +#ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT + #include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef OPEN_WATCOM_FLASH_LITE_186_PORT + #include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef GCC_MEGA_AVR + #include "../portable/GCC/ATMega323/portmacro.h" +#endif + +#ifdef IAR_MEGA_AVR + #include "../portable/IAR/ATMega323/portmacro.h" +#endif + +#ifdef MPLAB_PIC24_PORT + #include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h" +#endif + +#ifdef MPLAB_DSPIC_PORT + #include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h" +#endif + +#ifdef MPLAB_PIC18F_PORT + #include "../../Source/portable/MPLAB/PIC18F/portmacro.h" +#endif + +#ifdef MPLAB_PIC32MX_PORT + #include "../../Source/portable/MPLAB/PIC32MX/portmacro.h" +#endif + +#ifdef _FEDPICC + #include "libFreeRTOS/Include/portmacro.h" +#endif + +#ifdef SDCC_CYGNAL + #include "../../Source/portable/SDCC/Cygnal/portmacro.h" +#endif + +#ifdef GCC_ARM7 + #include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h" +#endif + +#ifdef GCC_ARM7_ECLIPSE + #include "portmacro.h" +#endif + +#ifdef ROWLEY_LPC23xx + #include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h" +#endif + +#ifdef IAR_MSP430 + #include "..\..\Source\portable\IAR\MSP430\portmacro.h" +#endif + +#ifdef GCC_MSP430 + #include "../../Source/portable/GCC/MSP430F449/portmacro.h" +#endif + +#ifdef ROWLEY_MSP430 + #include "../../Source/portable/Rowley/MSP430F449/portmacro.h" +#endif + +#ifdef ARM7_LPC21xx_KEIL_RVDS + #include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h" +#endif + +#ifdef SAM7_GCC + #include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h" +#endif + +#ifdef SAM7_IAR + #include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h" +#endif + +#ifdef SAM9XE_IAR + #include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h" +#endif + +#ifdef LPC2000_IAR + #include "..\..\Source\portable\IAR\LPC2000\portmacro.h" +#endif + +#ifdef STR71X_IAR + #include "..\..\Source\portable\IAR\STR71x\portmacro.h" +#endif + +#ifdef STR75X_IAR + #include "..\..\Source\portable\IAR\STR75x\portmacro.h" +#endif + +#ifdef STR75X_GCC + #include "..\..\Source\portable\GCC\STR75x\portmacro.h" +#endif + +#ifdef STR91X_IAR + #include "..\..\Source\portable\IAR\STR91x\portmacro.h" +#endif + +#ifdef GCC_H8S + #include "../../Source/portable/GCC/H8S2329/portmacro.h" +#endif + +#ifdef GCC_AT91FR40008 + #include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h" +#endif + +#ifdef RVDS_ARMCM3_LM3S102 + #include "../../Source/portable/RVDS/ARM_CM3/portmacro.h" +#endif + +#ifdef GCC_ARMCM3_LM3S102 + #include "../../Source/portable/GCC/ARM_CM3/portmacro.h" +#endif + +#ifdef GCC_ARMCM3 + #include "../../Source/portable/GCC/ARM_CM3/portmacro.h" +#endif + +#ifdef IAR_ARM_CM3 + #include "../../Source/portable/IAR/ARM_CM3/portmacro.h" +#endif + +#ifdef IAR_ARMCM3_LM + #include "../../Source/portable/IAR/ARM_CM3/portmacro.h" +#endif + +#ifdef HCS12_CODE_WARRIOR + #include "../../Source/portable/CodeWarrior/HCS12/portmacro.h" +#endif + +#ifdef MICROBLAZE_GCC + #include "../../Source/portable/GCC/MicroBlaze/portmacro.h" +#endif + +#ifdef TERN_EE + #include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h" +#endif + +#ifdef GCC_HCS12 + #include "../../Source/portable/GCC/HCS12/portmacro.h" +#endif + +#ifdef GCC_MCF5235 + #include "../../Source/portable/GCC/MCF5235/portmacro.h" +#endif + +#ifdef COLDFIRE_V2_GCC + #include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h" +#endif + +#ifdef COLDFIRE_V2_CODEWARRIOR + #include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h" +#endif + +#ifdef GCC_PPC405 + #include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h" +#endif + +#ifdef GCC_PPC440 + #include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h" +#endif + +#ifdef _16FX_SOFTUNE + #include "..\..\Source\portable\Softune\MB96340\portmacro.h" +#endif + +#ifdef BCC_INDUSTRIAL_PC_PORT + /* A short file name has to be used in place of the normal + FreeRTOSConfig.h when using the Borland compiler. */ + #include "frconfig.h" + #include "..\portable\BCC\16BitDOS\PC\prtmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef BCC_FLASH_LITE_186_PORT + /* A short file name has to be used in place of the normal + FreeRTOSConfig.h when using the Borland compiler. */ + #include "frconfig.h" + #include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef __GNUC__ + #ifdef __AVR32_AVR32A__ + #include "portmacro.h" + #endif +#endif + +#ifdef __ICCAVR32__ + #ifdef __CORE__ + #if __CORE__ == __AVR32A__ + #include "portmacro.h" + #endif + #endif +#endif + +#ifdef __91467D + #include "portmacro.h" +#endif + +#ifdef __96340 + #include "portmacro.h" +#endif + + +#ifdef __IAR_V850ES_Fx3__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Jx3__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Jx3_L__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Jx2__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Hx2__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_78K0R_Kx3__ + #include "../../Source/portable/IAR/78K0R/portmacro.h" +#endif + +#ifdef __IAR_78K0R_Kx3L__ + #include "../../Source/portable/IAR/78K0R/portmacro.h" +#endif + +#endif /* DEPRECATED_DEFINITIONS_H */ + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h new file mode 100644 index 0000000..bf8a985 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h @@ -0,0 +1,757 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef EVENT_GROUPS_H +#define EVENT_GROUPS_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h" must appear in source files before "include event_groups.h" +#endif + +/* FreeRTOS includes. */ +#include "timers.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * An event group is a collection of bits to which an application can assign a + * meaning. For example, an application may create an event group to convey + * the status of various CAN bus related events in which bit 0 might mean "A CAN + * message has been received and is ready for processing", bit 1 might mean "The + * application has queued a message that is ready for sending onto the CAN + * network", and bit 2 might mean "It is time to send a SYNC message onto the + * CAN network" etc. A task can then test the bit values to see which events + * are active, and optionally enter the Blocked state to wait for a specified + * bit or a group of specified bits to be active. To continue the CAN bus + * example, a CAN controlling task can enter the Blocked state (and therefore + * not consume any processing time) until either bit 0, bit 1 or bit 2 are + * active, at which time the bit that was actually active would inform the task + * which action it had to take (process a received message, send a message, or + * send a SYNC). + * + * The event groups implementation contains intelligence to avoid race + * conditions that would otherwise occur were an application to use a simple + * variable for the same purpose. This is particularly important with respect + * to when a bit within an event group is to be cleared, and when bits have to + * be set and then tested atomically - as is the case where event groups are + * used to create a synchronisation point between multiple tasks (a + * 'rendezvous'). + * + * \defgroup EventGroup + */ + + + +/** + * event_groups.h + * + * Type by which event groups are referenced. For example, a call to + * xEventGroupCreate() returns an EventGroupHandle_t variable that can then + * be used as a parameter to other event group functions. + * + * \defgroup EventGroupHandle_t EventGroupHandle_t + * \ingroup EventGroup + */ +struct EventGroupDef_t; +typedef struct EventGroupDef_t * EventGroupHandle_t; + +/* + * The type that holds event bits always matches TickType_t - therefore the + * number of bits it holds is set by configUSE_16_BIT_TICKS (16 bits if set to 1, + * 32 bits if set to 0. + * + * \defgroup EventBits_t EventBits_t + * \ingroup EventGroup + */ +typedef TickType_t EventBits_t; + +/** + * event_groups.h + *
+ EventGroupHandle_t xEventGroupCreate( void );
+
+ * + * Create a new event group. + * + * Internally, within the FreeRTOS implementation, event groups use a [small] + * block of memory, in which the event group's structure is stored. If an event + * groups is created using xEventGropuCreate() then the required memory is + * automatically dynamically allocated inside the xEventGroupCreate() function. + * (see http://www.freertos.org/a00111.html). If an event group is created + * using xEventGropuCreateStatic() then the application writer must instead + * provide the memory that will get used by the event group. + * xEventGroupCreateStatic() therefore allows an event group to be created + * without using any dynamic memory allocation. + * + * Although event groups are not related to ticks, for internal implementation + * reasons the number of bits available for use in an event group is dependent + * on the configUSE_16_BIT_TICKS setting in FreeRTOSConfig.h. If + * configUSE_16_BIT_TICKS is 1 then each event group contains 8 usable bits (bit + * 0 to bit 7). If configUSE_16_BIT_TICKS is set to 0 then each event group has + * 24 usable bits (bit 0 to bit 23). The EventBits_t type is used to store + * event bits within an event group. + * + * @return If the event group was created then a handle to the event group is + * returned. If there was insufficient FreeRTOS heap available to create the + * event group then NULL is returned. See http://www.freertos.org/a00111.html + * + * Example usage: + 
+	// Declare a variable to hold the created event group.
+	EventGroupHandle_t xCreatedEventGroup;
+
+	// Attempt to create the event group.
+	xCreatedEventGroup = xEventGroupCreate();
+
+	// Was the event group created successfully?
+	if( xCreatedEventGroup == NULL )
+	{
+		// The event group was not created because there was insufficient
+		// FreeRTOS heap available.
+	}
+	else
+	{
+		// The event group was created.
+	}
+
+ * \defgroup xEventGroupCreate xEventGroupCreate + * \ingroup EventGroup + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + EventGroupHandle_t xEventGroupCreate( void ) PRIVILEGED_FUNCTION; +#endif + +/** + * event_groups.h + *
+ EventGroupHandle_t xEventGroupCreateStatic( EventGroupHandle_t * pxEventGroupBuffer );
+
+ * + * Create a new event group. + * + * Internally, within the FreeRTOS implementation, event groups use a [small] + * block of memory, in which the event group's structure is stored. If an event + * groups is created using xEventGropuCreate() then the required memory is + * automatically dynamically allocated inside the xEventGroupCreate() function. + * (see http://www.freertos.org/a00111.html). If an event group is created + * using xEventGropuCreateStatic() then the application writer must instead + * provide the memory that will get used by the event group. + * xEventGroupCreateStatic() therefore allows an event group to be created + * without using any dynamic memory allocation. + * + * Although event groups are not related to ticks, for internal implementation + * reasons the number of bits available for use in an event group is dependent + * on the configUSE_16_BIT_TICKS setting in FreeRTOSConfig.h. If + * configUSE_16_BIT_TICKS is 1 then each event group contains 8 usable bits (bit + * 0 to bit 7). If configUSE_16_BIT_TICKS is set to 0 then each event group has + * 24 usable bits (bit 0 to bit 23). The EventBits_t type is used to store + * event bits within an event group. + * + * @param pxEventGroupBuffer pxEventGroupBuffer must point to a variable of type + * StaticEventGroup_t, which will be then be used to hold the event group's data + * structures, removing the need for the memory to be allocated dynamically. + * + * @return If the event group was created then a handle to the event group is + * returned. If pxEventGroupBuffer was NULL then NULL is returned. + * + * Example usage: + 
+	// StaticEventGroup_t is a publicly accessible structure that has the same
+	// size and alignment requirements as the real event group structure.  It is
+	// provided as a mechanism for applications to know the size of the event
+	// group (which is dependent on the architecture and configuration file
+	// settings) without breaking the strict data hiding policy by exposing the
+	// real event group internals.  This StaticEventGroup_t variable is passed
+	// into the xSemaphoreCreateEventGroupStatic() function and is used to store
+	// the event group's data structures
+	StaticEventGroup_t xEventGroupBuffer;
+
+	// Create the event group without dynamically allocating any memory.
+	xEventGroup = xEventGroupCreateStatic( &xEventGroupBuffer );
+
+ */ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ) PRIVILEGED_FUNCTION; +#endif + +/** + * event_groups.h + *
+	EventBits_t xEventGroupWaitBits( 	EventGroupHandle_t xEventGroup,
+										const EventBits_t uxBitsToWaitFor,
+										const BaseType_t xClearOnExit,
+										const BaseType_t xWaitForAllBits,
+										const TickType_t xTicksToWait );
+
+ * + * [Potentially] block to wait for one or more bits to be set within a + * previously created event group. + * + * This function cannot be called from an interrupt. + * + * @param xEventGroup The event group in which the bits are being tested. The + * event group must have previously been created using a call to + * xEventGroupCreate(). + * + * @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test + * inside the event group. For example, to wait for bit 0 and/or bit 2 set + * uxBitsToWaitFor to 0x05. To wait for bits 0 and/or bit 1 and/or bit 2 set + * uxBitsToWaitFor to 0x07. Etc. + * + * @param xClearOnExit If xClearOnExit is set to pdTRUE then any bits within + * uxBitsToWaitFor that are set within the event group will be cleared before + * xEventGroupWaitBits() returns if the wait condition was met (if the function + * returns for a reason other than a timeout). If xClearOnExit is set to + * pdFALSE then the bits set in the event group are not altered when the call to + * xEventGroupWaitBits() returns. + * + * @param xWaitForAllBits If xWaitForAllBits is set to pdTRUE then + * xEventGroupWaitBits() will return when either all the bits in uxBitsToWaitFor + * are set or the specified block time expires. If xWaitForAllBits is set to + * pdFALSE then xEventGroupWaitBits() will return when any one of the bits set + * in uxBitsToWaitFor is set or the specified block time expires. The block + * time is specified by the xTicksToWait parameter. + * + * @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait + * for one/all (depending on the xWaitForAllBits value) of the bits specified by + * uxBitsToWaitFor to become set. + * + * @return The value of the event group at the time either the bits being waited + * for became set, or the block time expired. Test the return value to know + * which bits were set. If xEventGroupWaitBits() returned because its timeout + * expired then not all the bits being waited for will be set. If + * xEventGroupWaitBits() returned because the bits it was waiting for were set + * then the returned value is the event group value before any bits were + * automatically cleared in the case that xClearOnExit parameter was set to + * pdTRUE. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   void aFunction( EventGroupHandle_t xEventGroup )
+   {
+   EventBits_t uxBits;
+   const TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
+
+		// Wait a maximum of 100ms for either bit 0 or bit 4 to be set within
+		// the event group.  Clear the bits before exiting.
+		uxBits = xEventGroupWaitBits(
+					xEventGroup,	// The event group being tested.
+					BIT_0 | BIT_4,	// The bits within the event group to wait for.
+					pdTRUE,			// BIT_0 and BIT_4 should be cleared before returning.
+					pdFALSE,		// Don't wait for both bits, either bit will do.
+					xTicksToWait );	// Wait a maximum of 100ms for either bit to be set.
+
+		if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+		{
+			// xEventGroupWaitBits() returned because both bits were set.
+		}
+		else if( ( uxBits & BIT_0 ) != 0 )
+		{
+			// xEventGroupWaitBits() returned because just BIT_0 was set.
+		}
+		else if( ( uxBits & BIT_4 ) != 0 )
+		{
+			// xEventGroupWaitBits() returned because just BIT_4 was set.
+		}
+		else
+		{
+			// xEventGroupWaitBits() returned because xTicksToWait ticks passed
+			// without either BIT_0 or BIT_4 becoming set.
+		}
+   }
+
+ * \defgroup xEventGroupWaitBits xEventGroupWaitBits + * \ingroup EventGroup + */ +EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear );
+
+ * + * Clear bits within an event group. This function cannot be called from an + * interrupt. + * + * @param xEventGroup The event group in which the bits are to be cleared. + * + * @param uxBitsToClear A bitwise value that indicates the bit or bits to clear + * in the event group. For example, to clear bit 3 only, set uxBitsToClear to + * 0x08. To clear bit 3 and bit 0 set uxBitsToClear to 0x09. + * + * @return The value of the event group before the specified bits were cleared. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   void aFunction( EventGroupHandle_t xEventGroup )
+   {
+   EventBits_t uxBits;
+
+		// Clear bit 0 and bit 4 in xEventGroup.
+		uxBits = xEventGroupClearBits(
+								xEventGroup,	// The event group being updated.
+								BIT_0 | BIT_4 );// The bits being cleared.
+
+		if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+		{
+			// Both bit 0 and bit 4 were set before xEventGroupClearBits() was
+			// called.  Both will now be clear (not set).
+		}
+		else if( ( uxBits & BIT_0 ) != 0 )
+		{
+			// Bit 0 was set before xEventGroupClearBits() was called.  It will
+			// now be clear.
+		}
+		else if( ( uxBits & BIT_4 ) != 0 )
+		{
+			// Bit 4 was set before xEventGroupClearBits() was called.  It will
+			// now be clear.
+		}
+		else
+		{
+			// Neither bit 0 nor bit 4 were set in the first place.
+		}
+   }
+
+ * \defgroup xEventGroupClearBits xEventGroupClearBits + * \ingroup EventGroup + */ +EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+
+ * + * A version of xEventGroupClearBits() that can be called from an interrupt. + * + * Setting bits in an event group is not a deterministic operation because there + * are an unknown number of tasks that may be waiting for the bit or bits being + * set. FreeRTOS does not allow nondeterministic operations to be performed + * while interrupts are disabled, so protects event groups that are accessed + * from tasks by suspending the scheduler rather than disabling interrupts. As + * a result event groups cannot be accessed directly from an interrupt service + * routine. Therefore xEventGroupClearBitsFromISR() sends a message to the + * timer task to have the clear operation performed in the context of the timer + * task. + * + * @param xEventGroup The event group in which the bits are to be cleared. + * + * @param uxBitsToClear A bitwise value that indicates the bit or bits to clear. + * For example, to clear bit 3 only, set uxBitsToClear to 0x08. To clear bit 3 + * and bit 0 set uxBitsToClear to 0x09. + * + * @return If the request to execute the function was posted successfully then + * pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned + * if the timer service queue was full. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   // An event group which it is assumed has already been created by a call to
+   // xEventGroupCreate().
+   EventGroupHandle_t xEventGroup;
+
+   void anInterruptHandler( void )
+   {
+		// Clear bit 0 and bit 4 in xEventGroup.
+		xResult = xEventGroupClearBitsFromISR(
+							xEventGroup,	 // The event group being updated.
+							BIT_0 | BIT_4 ); // The bits being set.
+
+		if( xResult == pdPASS )
+		{
+			// The message was posted successfully.
+		}
+  }
+
+ * \defgroup xEventGroupClearBitsFromISR xEventGroupClearBitsFromISR + * \ingroup EventGroup + */ +#if( configUSE_TRACE_FACILITY == 1 ) + BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION; +#else + #define xEventGroupClearBitsFromISR( xEventGroup, uxBitsToClear ) xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL ) +#endif + +/** + * event_groups.h + *
+	EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+
+ * + * Set bits within an event group. + * This function cannot be called from an interrupt. xEventGroupSetBitsFromISR() + * is a version that can be called from an interrupt. + * + * Setting bits in an event group will automatically unblock tasks that are + * blocked waiting for the bits. + * + * @param xEventGroup The event group in which the bits are to be set. + * + * @param uxBitsToSet A bitwise value that indicates the bit or bits to set. + * For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3 + * and bit 0 set uxBitsToSet to 0x09. + * + * @return The value of the event group at the time the call to + * xEventGroupSetBits() returns. There are two reasons why the returned value + * might have the bits specified by the uxBitsToSet parameter cleared. First, + * if setting a bit results in a task that was waiting for the bit leaving the + * blocked state then it is possible the bit will be cleared automatically + * (see the xClearBitOnExit parameter of xEventGroupWaitBits()). Second, any + * unblocked (or otherwise Ready state) task that has a priority above that of + * the task that called xEventGroupSetBits() will execute and may change the + * event group value before the call to xEventGroupSetBits() returns. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   void aFunction( EventGroupHandle_t xEventGroup )
+   {
+   EventBits_t uxBits;
+
+		// Set bit 0 and bit 4 in xEventGroup.
+		uxBits = xEventGroupSetBits(
+							xEventGroup,	// The event group being updated.
+							BIT_0 | BIT_4 );// The bits being set.
+
+		if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+		{
+			// Both bit 0 and bit 4 remained set when the function returned.
+		}
+		else if( ( uxBits & BIT_0 ) != 0 )
+		{
+			// Bit 0 remained set when the function returned, but bit 4 was
+			// cleared.  It might be that bit 4 was cleared automatically as a
+			// task that was waiting for bit 4 was removed from the Blocked
+			// state.
+		}
+		else if( ( uxBits & BIT_4 ) != 0 )
+		{
+			// Bit 4 remained set when the function returned, but bit 0 was
+			// cleared.  It might be that bit 0 was cleared automatically as a
+			// task that was waiting for bit 0 was removed from the Blocked
+			// state.
+		}
+		else
+		{
+			// Neither bit 0 nor bit 4 remained set.  It might be that a task
+			// was waiting for both of the bits to be set, and the bits were
+			// cleared as the task left the Blocked state.
+		}
+   }
+
+ * \defgroup xEventGroupSetBits xEventGroupSetBits + * \ingroup EventGroup + */ +EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken );
+
+ * + * A version of xEventGroupSetBits() that can be called from an interrupt. + * + * Setting bits in an event group is not a deterministic operation because there + * are an unknown number of tasks that may be waiting for the bit or bits being + * set. FreeRTOS does not allow nondeterministic operations to be performed in + * interrupts or from critical sections. Therefore xEventGroupSetBitsFromISR() + * sends a message to the timer task to have the set operation performed in the + * context of the timer task - where a scheduler lock is used in place of a + * critical section. + * + * @param xEventGroup The event group in which the bits are to be set. + * + * @param uxBitsToSet A bitwise value that indicates the bit or bits to set. + * For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3 + * and bit 0 set uxBitsToSet to 0x09. + * + * @param pxHigherPriorityTaskWoken As mentioned above, calling this function + * will result in a message being sent to the timer daemon task. If the + * priority of the timer daemon task is higher than the priority of the + * currently running task (the task the interrupt interrupted) then + * *pxHigherPriorityTaskWoken will be set to pdTRUE by + * xEventGroupSetBitsFromISR(), indicating that a context switch should be + * requested before the interrupt exits. For that reason + * *pxHigherPriorityTaskWoken must be initialised to pdFALSE. See the + * example code below. + * + * @return If the request to execute the function was posted successfully then + * pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned + * if the timer service queue was full. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   // An event group which it is assumed has already been created by a call to
+   // xEventGroupCreate().
+   EventGroupHandle_t xEventGroup;
+
+   void anInterruptHandler( void )
+   {
+   BaseType_t xHigherPriorityTaskWoken, xResult;
+
+		// xHigherPriorityTaskWoken must be initialised to pdFALSE.
+		xHigherPriorityTaskWoken = pdFALSE;
+
+		// Set bit 0 and bit 4 in xEventGroup.
+		xResult = xEventGroupSetBitsFromISR(
+							xEventGroup,	// The event group being updated.
+							BIT_0 | BIT_4   // The bits being set.
+							&xHigherPriorityTaskWoken );
+
+		// Was the message posted successfully?
+		if( xResult == pdPASS )
+		{
+			// If xHigherPriorityTaskWoken is now set to pdTRUE then a context
+			// switch should be requested.  The macro used is port specific and
+			// will be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() -
+			// refer to the documentation page for the port being used.
+			portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+		}
+  }
+
+ * \defgroup xEventGroupSetBitsFromISR xEventGroupSetBitsFromISR + * \ingroup EventGroup + */ +#if( configUSE_TRACE_FACILITY == 1 ) + BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; +#else + #define xEventGroupSetBitsFromISR( xEventGroup, uxBitsToSet, pxHigherPriorityTaskWoken ) xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken ) +#endif + +/** + * event_groups.h + *
+	EventBits_t xEventGroupSync(	EventGroupHandle_t xEventGroup,
+									const EventBits_t uxBitsToSet,
+									const EventBits_t uxBitsToWaitFor,
+									TickType_t xTicksToWait );
+
+ * + * Atomically set bits within an event group, then wait for a combination of + * bits to be set within the same event group. This functionality is typically + * used to synchronise multiple tasks, where each task has to wait for the other + * tasks to reach a synchronisation point before proceeding. + * + * This function cannot be used from an interrupt. + * + * The function will return before its block time expires if the bits specified + * by the uxBitsToWait parameter are set, or become set within that time. In + * this case all the bits specified by uxBitsToWait will be automatically + * cleared before the function returns. + * + * @param xEventGroup The event group in which the bits are being tested. The + * event group must have previously been created using a call to + * xEventGroupCreate(). + * + * @param uxBitsToSet The bits to set in the event group before determining + * if, and possibly waiting for, all the bits specified by the uxBitsToWait + * parameter are set. + * + * @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test + * inside the event group. For example, to wait for bit 0 and bit 2 set + * uxBitsToWaitFor to 0x05. To wait for bits 0 and bit 1 and bit 2 set + * uxBitsToWaitFor to 0x07. Etc. + * + * @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait + * for all of the bits specified by uxBitsToWaitFor to become set. + * + * @return The value of the event group at the time either the bits being waited + * for became set, or the block time expired. Test the return value to know + * which bits were set. If xEventGroupSync() returned because its timeout + * expired then not all the bits being waited for will be set. If + * xEventGroupSync() returned because all the bits it was waiting for were + * set then the returned value is the event group value before any bits were + * automatically cleared. + * + * Example usage: + 
+ // Bits used by the three tasks.
+ #define TASK_0_BIT		( 1 << 0 )
+ #define TASK_1_BIT		( 1 << 1 )
+ #define TASK_2_BIT		( 1 << 2 )
+
+ #define ALL_SYNC_BITS ( TASK_0_BIT | TASK_1_BIT | TASK_2_BIT )
+
+ // Use an event group to synchronise three tasks.  It is assumed this event
+ // group has already been created elsewhere.
+ EventGroupHandle_t xEventBits;
+
+ void vTask0( void *pvParameters )
+ {
+ EventBits_t uxReturn;
+ TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
+
+	 for( ;; )
+	 {
+		// Perform task functionality here.
+
+		// Set bit 0 in the event flag to note this task has reached the
+		// sync point.  The other two tasks will set the other two bits defined
+		// by ALL_SYNC_BITS.  All three tasks have reached the synchronisation
+		// point when all the ALL_SYNC_BITS are set.  Wait a maximum of 100ms
+		// for this to happen.
+		uxReturn = xEventGroupSync( xEventBits, TASK_0_BIT, ALL_SYNC_BITS, xTicksToWait );
+
+		if( ( uxReturn & ALL_SYNC_BITS ) == ALL_SYNC_BITS )
+		{
+			// All three tasks reached the synchronisation point before the call
+			// to xEventGroupSync() timed out.
+		}
+	}
+ }
+
+ void vTask1( void *pvParameters )
+ {
+	 for( ;; )
+	 {
+		// Perform task functionality here.
+
+		// Set bit 1 in the event flag to note this task has reached the
+		// synchronisation point.  The other two tasks will set the other two
+		// bits defined by ALL_SYNC_BITS.  All three tasks have reached the
+		// synchronisation point when all the ALL_SYNC_BITS are set.  Wait
+		// indefinitely for this to happen.
+		xEventGroupSync( xEventBits, TASK_1_BIT, ALL_SYNC_BITS, portMAX_DELAY );
+
+		// xEventGroupSync() was called with an indefinite block time, so
+		// this task will only reach here if the syncrhonisation was made by all
+		// three tasks, so there is no need to test the return value.
+	 }
+ }
+
+ void vTask2( void *pvParameters )
+ {
+	 for( ;; )
+	 {
+		// Perform task functionality here.
+
+		// Set bit 2 in the event flag to note this task has reached the
+		// synchronisation point.  The other two tasks will set the other two
+		// bits defined by ALL_SYNC_BITS.  All three tasks have reached the
+		// synchronisation point when all the ALL_SYNC_BITS are set.  Wait
+		// indefinitely for this to happen.
+		xEventGroupSync( xEventBits, TASK_2_BIT, ALL_SYNC_BITS, portMAX_DELAY );
+
+		// xEventGroupSync() was called with an indefinite block time, so
+		// this task will only reach here if the syncrhonisation was made by all
+		// three tasks, so there is no need to test the return value.
+	}
+ }
+
+
+ * \defgroup xEventGroupSync xEventGroupSync + * \ingroup EventGroup + */ +EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; + + +/** + * event_groups.h + *
+	EventBits_t xEventGroupGetBits( EventGroupHandle_t xEventGroup );
+
+ * + * Returns the current value of the bits in an event group. This function + * cannot be used from an interrupt. + * + * @param xEventGroup The event group being queried. + * + * @return The event group bits at the time xEventGroupGetBits() was called. + * + * \defgroup xEventGroupGetBits xEventGroupGetBits + * \ingroup EventGroup + */ +#define xEventGroupGetBits( xEventGroup ) xEventGroupClearBits( xEventGroup, 0 ) + +/** + * event_groups.h + *
+	EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup );
+
+ * + * A version of xEventGroupGetBits() that can be called from an ISR. + * + * @param xEventGroup The event group being queried. + * + * @return The event group bits at the time xEventGroupGetBitsFromISR() was called. + * + * \defgroup xEventGroupGetBitsFromISR xEventGroupGetBitsFromISR + * \ingroup EventGroup + */ +EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	void xEventGroupDelete( EventGroupHandle_t xEventGroup );
+
+ * + * Delete an event group that was previously created by a call to + * xEventGroupCreate(). Tasks that are blocked on the event group will be + * unblocked and obtain 0 as the event group's value. + * + * @param xEventGroup The event group being deleted. + */ +void vEventGroupDelete( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION; + +/* For internal use only. */ +void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet ) PRIVILEGED_FUNCTION; +void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear ) PRIVILEGED_FUNCTION; + + +#if (configUSE_TRACE_FACILITY == 1) + UBaseType_t uxEventGroupGetNumber( void* xEventGroup ) PRIVILEGED_FUNCTION; + void vEventGroupSetNumber( void* xEventGroup, UBaseType_t uxEventGroupNumber ) PRIVILEGED_FUNCTION; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* EVENT_GROUPS_H */ + + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/list.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/list.h new file mode 100644 index 0000000..0598a93 --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/list.h @@ -0,0 +1,412 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* + * This is the list implementation used by the scheduler. While it is tailored + * heavily for the schedulers needs, it is also available for use by + * application code. + * + * list_ts can only store pointers to list_item_ts. Each ListItem_t contains a + * numeric value (xItemValue). Most of the time the lists are sorted in + * descending item value order. + * + * Lists are created already containing one list item. The value of this + * item is the maximum possible that can be stored, it is therefore always at + * the end of the list and acts as a marker. The list member pxHead always + * points to this marker - even though it is at the tail of the list. This + * is because the tail contains a wrap back pointer to the true head of + * the list. + * + * In addition to it's value, each list item contains a pointer to the next + * item in the list (pxNext), a pointer to the list it is in (pxContainer) + * and a pointer to back to the object that contains it. These later two + * pointers are included for efficiency of list manipulation. There is + * effectively a two way link between the object containing the list item and + * the list item itself. + * + * + * \page ListIntroduction List Implementation + * \ingroup FreeRTOSIntro + */ + +#ifndef INC_FREERTOS_H + #error FreeRTOS.h must be included before list.h +#endif + +#ifndef LIST_H +#define LIST_H + +/* + * The list structure members are modified from within interrupts, and therefore + * by rights should be declared volatile. However, they are only modified in a + * functionally atomic way (within critical sections of with the scheduler + * suspended) and are either passed by reference into a function or indexed via + * a volatile variable. Therefore, in all use cases tested so far, the volatile + * qualifier can be omitted in order to provide a moderate performance + * improvement without adversely affecting functional behaviour. The assembly + * instructions generated by the IAR, ARM and GCC compilers when the respective + * compiler's options were set for maximum optimisation has been inspected and + * deemed to be as intended. That said, as compiler technology advances, and + * especially if aggressive cross module optimisation is used (a use case that + * has not been exercised to any great extend) then it is feasible that the + * volatile qualifier will be needed for correct optimisation. It is expected + * that a compiler removing essential code because, without the volatile + * qualifier on the list structure members and with aggressive cross module + * optimisation, the compiler deemed the code unnecessary will result in + * complete and obvious failure of the scheduler. If this is ever experienced + * then the volatile qualifier can be inserted in the relevant places within the + * list structures by simply defining configLIST_VOLATILE to volatile in + * FreeRTOSConfig.h (as per the example at the bottom of this comment block). + * If configLIST_VOLATILE is not defined then the preprocessor directives below + * will simply #define configLIST_VOLATILE away completely. + * + * To use volatile list structure members then add the following line to + * FreeRTOSConfig.h (without the quotes): + * "#define configLIST_VOLATILE volatile" + */ +#ifndef configLIST_VOLATILE + #define configLIST_VOLATILE +#endif /* configSUPPORT_CROSS_MODULE_OPTIMISATION */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Macros that can be used to place known values within the list structures, +then check that the known values do not get corrupted during the execution of +the application. These may catch the list data structures being overwritten in +memory. They will not catch data errors caused by incorrect configuration or +use of FreeRTOS.*/ +#if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 ) + /* Define the macros to do nothing. */ + #define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE + #define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE + #define listFIRST_LIST_INTEGRITY_CHECK_VALUE + #define listSECOND_LIST_INTEGRITY_CHECK_VALUE + #define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) + #define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) + #define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) + #define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) + #define listTEST_LIST_ITEM_INTEGRITY( pxItem ) + #define listTEST_LIST_INTEGRITY( pxList ) +#else + /* Define macros that add new members into the list structures. */ + #define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1; + #define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2; + #define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1; + #define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2; + + /* Define macros that set the new structure members to known values. */ + #define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE + #define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE + #define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE + #define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE + + /* Define macros that will assert if one of the structure members does not + contain its expected value. */ + #define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) ) + #define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) ) +#endif /* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES */ + + +/* + * Definition of the only type of object that a list can contain. + */ +struct xLIST; +struct xLIST_ITEM +{ + listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ + configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */ + struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */ + struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */ + void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */ + struct xLIST * configLIST_VOLATILE pxContainer; /*< Pointer to the list in which this list item is placed (if any). */ + listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ +}; +typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */ + +struct xMINI_LIST_ITEM +{ + listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ + configLIST_VOLATILE TickType_t xItemValue; + struct xLIST_ITEM * configLIST_VOLATILE pxNext; + struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; +}; +typedef struct xMINI_LIST_ITEM MiniListItem_t; + +/* + * Definition of the type of queue used by the scheduler. + */ +typedef struct xLIST +{ + listFIRST_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ + volatile UBaseType_t uxNumberOfItems; + ListItem_t * configLIST_VOLATILE pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */ + MiniListItem_t xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */ + listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ +} List_t; + +/* + * Access macro to set the owner of a list item. The owner of a list item + * is the object (usually a TCB) that contains the list item. + * + * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER + * \ingroup LinkedList + */ +#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) ) + +/* + * Access macro to get the owner of a list item. The owner of a list item + * is the object (usually a TCB) that contains the list item. + * + * \page listGET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER + * \ingroup LinkedList + */ +#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner ) + +/* + * Access macro to set the value of the list item. In most cases the value is + * used to sort the list in descending order. + * + * \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE + * \ingroup LinkedList + */ +#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) ) + +/* + * Access macro to retrieve the value of the list item. The value can + * represent anything - for example the priority of a task, or the time at + * which a task should be unblocked. + * + * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE + * \ingroup LinkedList + */ +#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue ) + +/* + * Access macro to retrieve the value of the list item at the head of a given + * list. + * + * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE + * \ingroup LinkedList + */ +#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue ) + +/* + * Return the list item at the head of the list. + * + * \page listGET_HEAD_ENTRY listGET_HEAD_ENTRY + * \ingroup LinkedList + */ +#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext ) + +/* + * Return the next list item. + * + * \page listGET_NEXT listGET_NEXT + * \ingroup LinkedList + */ +#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext ) + +/* + * Return the list item that marks the end of the list + * + * \page listGET_END_MARKER listGET_END_MARKER + * \ingroup LinkedList + */ +#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) ) + +/* + * Access macro to determine if a list contains any items. The macro will + * only have the value true if the list is empty. + * + * \page listLIST_IS_EMPTY listLIST_IS_EMPTY + * \ingroup LinkedList + */ +#define listLIST_IS_EMPTY( pxList ) ( ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) ? pdTRUE : pdFALSE ) + +/* + * Access macro to return the number of items in the list. + */ +#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems ) + +/* + * Access function to obtain the owner of the next entry in a list. + * + * The list member pxIndex is used to walk through a list. Calling + * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list + * and returns that entry's pxOwner parameter. Using multiple calls to this + * function it is therefore possible to move through every item contained in + * a list. + * + * The pxOwner parameter of a list item is a pointer to the object that owns + * the list item. In the scheduler this is normally a task control block. + * The pxOwner parameter effectively creates a two way link between the list + * item and its owner. + * + * @param pxTCB pxTCB is set to the address of the owner of the next list item. + * @param pxList The list from which the next item owner is to be returned. + * + * \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY + * \ingroup LinkedList + */ +#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \ +{ \ +List_t * const pxConstList = ( pxList ); \ + /* Increment the index to the next item and return the item, ensuring */ \ + /* we don't return the marker used at the end of the list. */ \ + ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \ + if( ( void * ) ( pxConstList )->pxIndex == ( void * ) &( ( pxConstList )->xListEnd ) ) \ + { \ + ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \ + } \ + ( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \ +} + + +/* + * Access function to obtain the owner of the first entry in a list. Lists + * are normally sorted in ascending item value order. + * + * This function returns the pxOwner member of the first item in the list. + * The pxOwner parameter of a list item is a pointer to the object that owns + * the list item. In the scheduler this is normally a task control block. + * The pxOwner parameter effectively creates a two way link between the list + * item and its owner. + * + * @param pxList The list from which the owner of the head item is to be + * returned. + * + * \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY + * \ingroup LinkedList + */ +#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->pvOwner ) + +/* + * Check to see if a list item is within a list. The list item maintains a + * "container" pointer that points to the list it is in. All this macro does + * is check to see if the container and the list match. + * + * @param pxList The list we want to know if the list item is within. + * @param pxListItem The list item we want to know if is in the list. + * @return pdTRUE if the list item is in the list, otherwise pdFALSE. + */ +#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( ( pxListItem )->pxContainer == ( pxList ) ) ? ( pdTRUE ) : ( pdFALSE ) ) + +/* + * Return the list a list item is contained within (referenced from). + * + * @param pxListItem The list item being queried. + * @return A pointer to the List_t object that references the pxListItem + */ +#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pxContainer ) + +/* + * This provides a crude means of knowing if a list has been initialised, as + * pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise() + * function. + */ +#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY ) + +/* + * Must be called before a list is used! This initialises all the members + * of the list structure and inserts the xListEnd item into the list as a + * marker to the back of the list. + * + * @param pxList Pointer to the list being initialised. + * + * \page vListInitialise vListInitialise + * \ingroup LinkedList + */ +void vListInitialise( List_t * const pxList ) PRIVILEGED_FUNCTION; + +/* + * Must be called before a list item is used. This sets the list container to + * null so the item does not think that it is already contained in a list. + * + * @param pxItem Pointer to the list item being initialised. + * + * \page vListInitialiseItem vListInitialiseItem + * \ingroup LinkedList + */ +void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION; + +/* + * Insert a list item into a list. The item will be inserted into the list in + * a position determined by its item value (descending item value order). + * + * @param pxList The list into which the item is to be inserted. + * + * @param pxNewListItem The item that is to be placed in the list. + * + * \page vListInsert vListInsert + * \ingroup LinkedList + */ +void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION; + +/* + * Insert a list item into a list. The item will be inserted in a position + * such that it will be the last item within the list returned by multiple + * calls to listGET_OWNER_OF_NEXT_ENTRY. + * + * The list member pxIndex is used to walk through a list. Calling + * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list. + * Placing an item in a list using vListInsertEnd effectively places the item + * in the list position pointed to by pxIndex. This means that every other + * item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before + * the pxIndex parameter again points to the item being inserted. + * + * @param pxList The list into which the item is to be inserted. + * + * @param pxNewListItem The list item to be inserted into the list. + * + * \page vListInsertEnd vListInsertEnd + * \ingroup LinkedList + */ +void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION; + +/* + * Remove an item from a list. The list item has a pointer to the list that + * it is in, so only the list item need be passed into the function. + * + * @param uxListRemove The item to be removed. The item will remove itself from + * the list pointed to by it's pxContainer parameter. + * + * @return The number of items that remain in the list after the list item has + * been removed. + * + * \page uxListRemove uxListRemove + * \ingroup LinkedList + */ +UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION; + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h new file mode 100644 index 0000000..b20c09e --- /dev/null +++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h @@ -0,0 +1,803 @@ +/* + * FreeRTOS Kernel V10.3.1 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +/* + * Message buffers build functionality on top of FreeRTOS stream buffers. + * Whereas stream buffers are used to send a continuous stream of data from one + * task or interrupt to another, message buffers are used to send variable + * length discrete messages from one task or interrupt to another. Their + * implementation is light weight, making them particularly suited for interrupt + * to task and core to core communication scenarios. + * + * ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer + * implementation (so also the message buffer implementation, as message buffers + * are built on top of stream buffers) assumes there is only one task or + * interrupt that will write to the buffer (the writer), and only one task or + * interrupt that will read from the buffer (the reader). It is safe for the + * writer and reader to be different tasks or interrupts, but, unlike other + * FreeRTOS objects, it is not safe to have multiple different writers or + * multiple different readers. If there are to be multiple different writers + * then the application writer must place each call to a writing API function + * (such as xMessageBufferSend()) inside a critical section and set the send + * block time to 0. Likewise, if there are to be multiple different readers + * then the application writer must place each call to a reading API function + * (such as xMessageBufferRead()) inside a critical section and set the receive + * timeout to 0. + * + * Message buffers hold variable length messages. To enable that, when a + * message is written to the message buffer an additional sizeof( size_t ) bytes + * are also written to store the message's length (that happens internally, with + * the API function). sizeof( size_t ) is typically 4 bytes on a 32-bit + * architecture, so writing a 10 byte message to a message buffer on a 32-bit + * architecture will actually reduce the available space in the message buffer + * by 14 bytes (10 byte are used by the message, and 4 bytes to hold the length + * of the message). + */ + +#ifndef FREERTOS_MESSAGE_BUFFER_H +#define FREERTOS_MESSAGE_BUFFER_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h must appear in source files before include message_buffer.h" +#endif + +/* Message buffers are built onto of stream buffers. */ +#include "stream_buffer.h" + +#if defined( __cplusplus ) +extern "C" { +#endif + +/** + * Type by which message buffers are referenced. For example, a call to + * xMessageBufferCreate() returns an MessageBufferHandle_t variable that can + * then be used as a parameter to xMessageBufferSend(), xMessageBufferReceive(), + * etc. + */ +typedef void * MessageBufferHandle_t; + +/*-----------------------------------------------------------*/ + +/** + * message_buffer.h + * +
+MessageBufferHandle_t xMessageBufferCreate( size_t xBufferSizeBytes );
+
+ * + * Creates a new message buffer using dynamically allocated memory. See + * xMessageBufferCreateStatic() for a version that uses statically allocated + * memory (memory that is allocated at compile time). + * + * configSUPPORT_DYNAMIC_ALLOCATION must be set to 1 or left undefined in + * FreeRTOSConfig.h for xMessageBufferCreate() to be available. + * + * @param xBufferSizeBytes The total number of bytes (not messages) the message + * buffer will be able to hold at any one time. When a message is written to + * the message buffer an additional sizeof( size_t ) bytes are also written to + * store the message's length. sizeof( size_t ) is typically 4 bytes on a + * 32-bit architecture, so on most 32-bit architectures a 10 byte message will + * take up 14 bytes of message buffer space. + * + * @return If NULL is returned, then the message buffer cannot be created + * because there is insufficient heap memory available for FreeRTOS to allocate + * the message buffer data structures and storage area. A non-NULL value being + * returned indicates that the message buffer has been created successfully - + * the returned value should be stored as the handle to the created message + * buffer. + * + * Example use: +
+
+void vAFunction( void )
+{
+MessageBufferHandle_t xMessageBuffer;
+const size_t xMessageBufferSizeBytes = 100;
+
+    // Create a message buffer that can hold 100 bytes.  The memory used to hold
+    // both the message buffer structure and the messages themselves is allocated
+    // dynamically.  Each message added to the buffer consumes an additional 4
+    // bytes which are used to hold the lengh of the message.
+    xMessageBuffer = xMessageBufferCreate( xMessageBufferSizeBytes );
+
+    if( xMessageBuffer == NULL )
+    {
+        // There was not enough heap memory space available to create the
+        // message buffer.
+    }
+    else
+    {
+        // The message buffer was created successfully and can now be used.
+    }
+
+
+ * \defgroup xMessageBufferCreate xMessageBufferCreate + * \ingroup MessageBufferManagement + */ +#define xMessageBufferCreate( xBufferSizeBytes ) ( MessageBufferHandle_t ) xStreamBufferGenericCreate( xBufferSizeBytes, ( size_t ) 0, pdTRUE ) + +/** + * message_buffer.h + * +
+MessageBufferHandle_t xMessageBufferCreateStatic( size_t xBufferSizeBytes,
+                                                  uint8_t *pucMessageBufferStorageArea,
+                                                  StaticMessageBuffer_t *pxStaticMessageBuffer );
+
+ * Creates a new message buffer using statically allocated memory. See + * xMessageBufferCreate() for a version that uses dynamically allocated memory. + * + * @param xBufferSizeBytes The size, in bytes, of the buffer pointed to by the + * pucMessageBufferStorageArea parameter. When a message is written to the + * message buffer an additional sizeof( size_t ) bytes are also written to store + * the message's length. sizeof( size_t ) is typically 4 bytes on a 32-bit + * architecture, so on most 32-bit architecture a 10 byte message will take up + * 14 bytes of message buffer space. The maximum number of bytes that can be + * stored in the message buffer is actually (xBufferSizeBytes - 1). + * + * @param pucMessageBufferStorageArea Must point to a uint8_t array that is at + * least xBufferSizeBytes + 1 big. This is the array to which messages are + * copied when they are written to the message buffer. + * + * @param pxStaticMessageBuffer Must point to a variable of type + * StaticMessageBuffer_t, which will be used to hold the message buffer's data + * structure. + * + * @return If the message buffer is created successfully then a handle to the + * created message buffer is returned. If either pucMessageBufferStorageArea or + * pxStaticmessageBuffer are NULL then NULL is returned. + * + * Example use: +
+
+// Used to dimension the array used to hold the messages.  The available space
+// will actually be one less than this, so 999.
+#define STORAGE_SIZE_BYTES 1000
+
+// Defines the memory that will actually hold the messages within the message
+// buffer.
+static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
+
+// The variable used to hold the message buffer structure.
+StaticMessageBuffer_t xMessageBufferStruct;
+
+void MyFunction( void )
+{
+MessageBufferHandle_t xMessageBuffer;
+
+    xMessageBuffer = xMessageBufferCreateStatic( sizeof( ucBufferStorage ),
+                                                 ucBufferStorage,
+                                                 &xMessageBufferStruct );
+
+    // As neither the pucMessageBufferStorageArea or pxStaticMessageBuffer
+    // parameters were NULL, xMessageBuffer will not be NULL, and can be used to
+    // reference the created message buffer in other message buffer API calls.
+
+    // Other code that uses the message buffer can go here.
+}
+
+
+ * \defgroup xMessageBufferCreateStatic xMessageBufferCreateStatic + * \ingroup MessageBufferManagement + */ +#define xMessageBufferCreateStatic( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer ) ( MessageBufferHandle_t ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, 0, pdTRUE, pucMessageBufferStorageArea, pxStaticMessageBuffer ) + +/** + * message_buffer.h + * +
+size_t xMessageBufferSend( MessageBufferHandle_t xMessageBuffer,
+                           const void *pvTxData,
+                           size_t xDataLengthBytes,
+                           TickType_t xTicksToWait );
+
+ *
+ * Sends a discrete message to the message buffer.  The message can be any
+ * length that fits within the buffer's free space, and is copied into the
+ * buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferSend() to write to a message buffer from a task.  Use
+ * xMessageBufferSendFromISR() to write to a message buffer from an interrupt
+ * service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer to which a message is
+ * being sent.
+ *
+ * @param pvTxData A pointer to the message that is to be copied into the
+ * message buffer.
+ *
+ * @param xDataLengthBytes The length of the message.  That is, the number of
+ * bytes to copy from pvTxData into the message buffer.  When a message is
+ * written to the message buffer an additional sizeof( size_t ) bytes are also
+ * written to store the message's length.  sizeof( size_t ) is typically 4 bytes
+ * on a 32-bit architecture, so on most 32-bit architecture setting
+ * xDataLengthBytes to 20 will reduce the free space in the message buffer by 24
+ * bytes (20 bytes of message data and 4 bytes to hold the message length).
+ *
+ * @param xTicksToWait The maximum amount of time the calling task should remain
+ * in the Blocked state to wait for enough space to become available in the
+ * message buffer, should the message buffer have insufficient space when
+ * xMessageBufferSend() is called.  The calling task will never block if
+ * xTicksToWait is zero.  The block time is specified in tick periods, so the
+ * absolute time it represents is dependent on the tick frequency.  The macro
+ * pdMS_TO_TICKS() can be used to convert a time specified in milliseconds into
+ * a time specified in ticks.  Setting xTicksToWait to portMAX_DELAY will cause
+ * the task to wait indefinitely (without timing out), provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h.  Tasks do not use any
+ * CPU time when they are in the Blocked state.
+ *
+ * @return The number of bytes written to the message buffer.  If the call to
+ * xMessageBufferSend() times out before there was enough space to write the
+ * message into the message buffer then zero is returned.  If the call did not
+ * time out then xDataLengthBytes is returned.
+ *
+ * Example use:
+
+void vAFunction( MessageBufferHandle_t xMessageBuffer )
+{
+size_t xBytesSent;
+uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
+char *pcStringToSend = "String to send";
+const TickType_t x100ms = pdMS_TO_TICKS( 100 );
+
+    // Send an array to the message buffer, blocking for a maximum of 100ms to
+    // wait for enough space to be available in the message buffer.
+    xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
+
+    if( xBytesSent != sizeof( ucArrayToSend ) )
+    {
+        // The call to xMessageBufferSend() times out before there was enough
+        // space in the buffer for the data to be written.
+    }
+
+    // Send the string to the message buffer.  Return immediately if there is
+    // not enough space in the buffer.
+    xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
+
+    if( xBytesSent != strlen( pcStringToSend ) )
+    {
+        // The string could not be added to the message buffer because there was
+        // not enough free space in the buffer.
+    }
+}
+

+ * \defgroup xMessageBufferSend xMessageBufferSend
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferSend( xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait ) xStreamBufferSend( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait )
+
+/**
+ * message_buffer.h
+ *
+
+size_t xMessageBufferSendFromISR( MessageBufferHandle_t xMessageBuffer,
+                                  const void *pvTxData,
+                                  size_t xDataLengthBytes,
+                                  BaseType_t *pxHigherPriorityTaskWoken );
+
+ *
+ * Interrupt safe version of the API function that sends a discrete message to
+ * the message buffer.  The message can be any length that fits within the
+ * buffer's free space, and is copied into the buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferSend() to write to a message buffer from a task.  Use
+ * xMessageBufferSendFromISR() to write to a message buffer from an interrupt
+ * service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer to which a message is
+ * being sent.
+ *
+ * @param pvTxData A pointer to the message that is to be copied into the
+ * message buffer.
+ *
+ * @param xDataLengthBytes The length of the message.  That is, the number of
+ * bytes to copy from pvTxData into the message buffer.  When a message is
+ * written to the message buffer an additional sizeof( size_t ) bytes are also
+ * written to store the message's length.  sizeof( size_t ) is typically 4 bytes
+ * on a 32-bit architecture, so on most 32-bit architecture setting
+ * xDataLengthBytes to 20 will reduce the free space in the message buffer by 24
+ * bytes (20 bytes of message data and 4 bytes to hold the message length).
+ *
+ * @param pxHigherPriorityTaskWoken  It is possible that a message buffer will
+ * have a task blocked on it waiting for data.  Calling
+ * xMessageBufferSendFromISR() can make data available, and so cause a task that
+ * was waiting for data to leave the Blocked state.  If calling
+ * xMessageBufferSendFromISR() causes a task to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently executing task (the
+ * task that was interrupted), then, internally, xMessageBufferSendFromISR()
+ * will set *pxHigherPriorityTaskWoken to pdTRUE.  If
+ * xMessageBufferSendFromISR() sets this value to pdTRUE, then normally a
+ * context switch should be performed before the interrupt is exited.  This will
+ * ensure that the interrupt returns directly to the highest priority Ready
+ * state task.  *pxHigherPriorityTaskWoken should be set to pdFALSE before it
+ * is passed into the function.  See the code example below for an example.
+ *
+ * @return The number of bytes actually written to the message buffer.  If the
+ * message buffer didn't have enough free space for the message to be stored
+ * then 0 is returned, otherwise xDataLengthBytes is returned.
+ *
+ * Example use:
+
+// A message buffer that has already been created.
+MessageBufferHandle_t xMessageBuffer;
+
+void vAnInterruptServiceRoutine( void )
+{
+size_t xBytesSent;
+char *pcStringToSend = "String to send";
+BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
+
+    // Attempt to send the string to the message buffer.
+    xBytesSent = xMessageBufferSendFromISR( xMessageBuffer,
+                                            ( void * ) pcStringToSend,
+                                            strlen( pcStringToSend ),
+                                            &xHigherPriorityTaskWoken );
+
+    if( xBytesSent != strlen( pcStringToSend ) )
+    {
+        // The string could not be added to the message buffer because there was
+        // not enough free space in the buffer.
+    }
+
+    // If xHigherPriorityTaskWoken was set to pdTRUE inside
+    // xMessageBufferSendFromISR() then a task that has a priority above the
+    // priority of the currently executing task was unblocked and a context
+    // switch should be performed to ensure the ISR returns to the unblocked
+    // task.  In most FreeRTOS ports this is done by simply passing
+    // xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
+    // variables value, and perform the context switch if necessary.  Check the
+    // documentation for the port in use for port specific instructions.
+    portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+}
+

+ * \defgroup xMessageBufferSendFromISR xMessageBufferSendFromISR
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferSendFromISR( xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferSendFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken )
+
+/**
+ * message_buffer.h
+ *
+
+size_t xMessageBufferReceive( MessageBufferHandle_t xMessageBuffer,
+                              void *pvRxData,
+                              size_t xBufferLengthBytes,
+                              TickType_t xTicksToWait );
+

+ *
+ * Receives a discrete message from a message buffer.  Messages can be of
+ * variable length and are copied out of the buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferReceive() to read from a message buffer from a task.  Use
+ * xMessageBufferReceiveFromISR() to read from a message buffer from an
+ * interrupt service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer from which a message
+ * is being received.
+ *
+ * @param pvRxData A pointer to the buffer into which the received message is
+ * to be copied.
+ *
+ * @param xBufferLengthBytes The length of the buffer pointed to by the pvRxData
+ * parameter.  This sets the maximum length of the message that can be received.
+ * If xBufferLengthBytes is too small to hold the next message then the message
+ * will be left in the message buffer and 0 will be returned.
+ *
+ * @param xTicksToWait The maximum amount of time the task should remain in the
+ * Blocked state to wait for a message, should the message buffer be empty.
+ * xMessageBufferReceive() will return immediately if xTicksToWait is zero and
+ * the message buffer is empty.  The block time is specified in tick periods, so
+ * the absolute time it represents is dependent on the tick frequency.  The
+ * macro pdMS_TO_TICKS() can be used to convert a time specified in milliseconds
+ * into a time specified in ticks.  Setting xTicksToWait to portMAX_DELAY will
+ * cause the task to wait indefinitely (without timing out), provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h.  Tasks do not use any
+ * CPU time when they are in the Blocked state.
+ *
+ * @return The length, in bytes, of the message read from the message buffer, if
+ * any.  If xMessageBufferReceive() times out before a message became available
+ * then zero is returned.  If the length of the message is greater than
+ * xBufferLengthBytes then the message will be left in the message buffer and
+ * zero is returned.
+ *
+ * Example use:
+
+void vAFunction( MessageBuffer_t xMessageBuffer )
+{
+uint8_t ucRxData[ 20 ];
+size_t xReceivedBytes;
+const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
+
+    // Receive the next message from the message buffer.  Wait in the Blocked
+    // state (so not using any CPU processing time) for a maximum of 100ms for
+    // a message to become available.
+    xReceivedBytes = xMessageBufferReceive( xMessageBuffer,
+                                            ( void * ) ucRxData,
+                                            sizeof( ucRxData ),
+                                            xBlockTime );
+
+    if( xReceivedBytes > 0 )
+    {
+        // A ucRxData contains a message that is xReceivedBytes long.  Process
+        // the message here....
+    }
+}
+

+ * \defgroup xMessageBufferReceive xMessageBufferReceive
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferReceive( xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait ) xStreamBufferReceive( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait )
+
+
+/**
+ * message_buffer.h
+ *
+
+size_t xMessageBufferReceiveFromISR( MessageBufferHandle_t xMessageBuffer,
+                                     void *pvRxData,
+                                     size_t xBufferLengthBytes,
+                                     BaseType_t *pxHigherPriorityTaskWoken );
+

+ *
+ * An interrupt safe version of the API function that receives a discrete
+ * message from a message buffer.  Messages can be of variable length and are
+ * copied out of the buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xMessageBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xMessageBufferRead()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xMessageBufferReceive() to read from a message buffer from a task.  Use
+ * xMessageBufferReceiveFromISR() to read from a message buffer from an
+ * interrupt service routine (ISR).
+ *
+ * @param xMessageBuffer The handle of the message buffer from which a message
+ * is being received.
+ *
+ * @param pvRxData A pointer to the buffer into which the received message is
+ * to be copied.
+ *
+ * @param xBufferLengthBytes The length of the buffer pointed to by the pvRxData
+ * parameter.  This sets the maximum length of the message that can be received.
+ * If xBufferLengthBytes is too small to hold the next message then the message
+ * will be left in the message buffer and 0 will be returned.
+ *
+ * @param pxHigherPriorityTaskWoken  It is possible that a message buffer will
+ * have a task blocked on it waiting for space to become available.  Calling
+ * xMessageBufferReceiveFromISR() can make space available, and so cause a task
+ * that is waiting for space to leave the Blocked state.  If calling
+ * xMessageBufferReceiveFromISR() causes a task to leave the Blocked state, and
+ * the unblocked task has a priority higher than the currently executing task
+ * (the task that was interrupted), then, internally,
+ * xMessageBufferReceiveFromISR() will set *pxHigherPriorityTaskWoken to pdTRUE.
+ * If xMessageBufferReceiveFromISR() sets this value to pdTRUE, then normally a
+ * context switch should be performed before the interrupt is exited.  That will
+ * ensure the interrupt returns directly to the highest priority Ready state
+ * task.  *pxHigherPriorityTaskWoken should be set to pdFALSE before it is
+ * passed into the function.  See the code example below for an example.
+ *
+ * @return The length, in bytes, of the message read from the message buffer, if
+ * any.
+ *
+ * Example use:
+
+// A message buffer that has already been created.
+MessageBuffer_t xMessageBuffer;
+
+void vAnInterruptServiceRoutine( void )
+{
+uint8_t ucRxData[ 20 ];
+size_t xReceivedBytes;
+BaseType_t xHigherPriorityTaskWoken = pdFALSE;  // Initialised to pdFALSE.
+
+    // Receive the next message from the message buffer.
+    xReceivedBytes = xMessageBufferReceiveFromISR( xMessageBuffer,
+                                                  ( void * ) ucRxData,
+                                                  sizeof( ucRxData ),
+                                                  &xHigherPriorityTaskWoken );
+
+    if( xReceivedBytes > 0 )
+    {
+        // A ucRxData contains a message that is xReceivedBytes long.  Process
+        // the message here....
+    }
+
+    // If xHigherPriorityTaskWoken was set to pdTRUE inside
+    // xMessageBufferReceiveFromISR() then a task that has a priority above the
+    // priority of the currently executing task was unblocked and a context
+    // switch should be performed to ensure the ISR returns to the unblocked
+    // task.  In most FreeRTOS ports this is done by simply passing
+    // xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
+    // variables value, and perform the context switch if necessary.  Check the
+    // documentation for the port in use for port specific instructions.
+    portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+}
+

+ * \defgroup xMessageBufferReceiveFromISR xMessageBufferReceiveFromISR
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferReceiveFromISR( xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferReceiveFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken )
+
+/**
+ * message_buffer.h
+ *
+
+void vMessageBufferDelete( MessageBufferHandle_t xMessageBuffer );
+

+ *
+ * Deletes a message buffer that was previously created using a call to
+ * xMessageBufferCreate() or xMessageBufferCreateStatic().  If the message
+ * buffer was created using dynamic memory (that is, by xMessageBufferCreate()),
+ * then the allocated memory is freed.
+ *
+ * A message buffer handle must not be used after the message buffer has been
+ * deleted.
+ *
+ * @param xMessageBuffer The handle of the message buffer to be deleted.
+ *
+ */
+#define vMessageBufferDelete( xMessageBuffer ) vStreamBufferDelete( ( StreamBufferHandle_t ) xMessageBuffer )
+
+/**
+ * message_buffer.h
+
+BaseType_t xMessageBufferIsFull( MessageBufferHandle_t xMessageBuffer ) );
+

+ *
+ * Tests to see if a message buffer is full.  A message buffer is full if it
+ * cannot accept any more messages, of any size, until space is made available
+ * by a message being removed from the message buffer.
+ *
+ * @param xMessageBuffer The handle of the message buffer being queried.
+ *
+ * @return If the message buffer referenced by xMessageBuffer is full then
+ * pdTRUE is returned.  Otherwise pdFALSE is returned.
+ */
+#define xMessageBufferIsFull( xMessageBuffer ) xStreamBufferIsFull( ( StreamBufferHandle_t ) xMessageBuffer )
+
+/**
+ * message_buffer.h
+
+BaseType_t xMessageBufferIsEmpty( MessageBufferHandle_t xMessageBuffer ) );
+

+ *
+ * Tests to see if a message buffer is empty (does not contain any messages).
+ *
+ * @param xMessageBuffer The handle of the message buffer being queried.
+ *
+ * @return If the message buffer referenced by xMessageBuffer is empty then
+ * pdTRUE is returned.  Otherwise pdFALSE is returned.
+ *
+ */
+#define xMessageBufferIsEmpty( xMessageBuffer ) xStreamBufferIsEmpty( ( StreamBufferHandle_t ) xMessageBuffer )
+
+/**
+ * message_buffer.h
+
+BaseType_t xMessageBufferReset( MessageBufferHandle_t xMessageBuffer );
+

+ *
+ * Resets a message buffer to its initial empty state, discarding any message it
+ * contained.
+ *
+ * A message buffer can only be reset if there are no tasks blocked on it.
+ *
+ * @param xMessageBuffer The handle of the message buffer being reset.
+ *
+ * @return If the message buffer was reset then pdPASS is returned.  If the
+ * message buffer could not be reset because either there was a task blocked on
+ * the message queue to wait for space to become available, or to wait for a
+ * a message to be available, then pdFAIL is returned.
+ *
+ * \defgroup xMessageBufferReset xMessageBufferReset
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferReset( xMessageBuffer ) xStreamBufferReset( ( StreamBufferHandle_t ) xMessageBuffer )
+
+
+/**
+ * message_buffer.h
+
+size_t xMessageBufferSpaceAvailable( MessageBufferHandle_t xMessageBuffer ) );
+

+ * Returns the number of bytes of free space in the message buffer.
+ *
+ * @param xMessageBuffer The handle of the message buffer being queried.
+ *
+ * @return The number of bytes that can be written to the message buffer before
+ * the message buffer would be full.  When a message is written to the message
+ * buffer an additional sizeof( size_t ) bytes are also written to store the
+ * message's length.  sizeof( size_t ) is typically 4 bytes on a 32-bit
+ * architecture, so if xMessageBufferSpacesAvailable() returns 10, then the size
+ * of the largest message that can be written to the message buffer is 6 bytes.
+ *
+ * \defgroup xMessageBufferSpaceAvailable xMessageBufferSpaceAvailable
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferSpaceAvailable( xMessageBuffer ) xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer )
+#define xMessageBufferSpacesAvailable( xMessageBuffer ) xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer ) /* Corrects typo in original macro name. */
+
+/**
+ * message_buffer.h
+ 
+ size_t xMessageBufferNextLengthBytes( MessageBufferHandle_t xMessageBuffer ) );
+ 

+ * Returns the length (in bytes) of the next message in a message buffer.
+ * Useful if xMessageBufferReceive() returned 0 because the size of the buffer
+ * passed into xMessageBufferReceive() was too small to hold the next message.
+ *
+ * @param xMessageBuffer The handle of the message buffer being queried.
+ *
+ * @return The length (in bytes) of the next message in the message buffer, or 0
+ * if the message buffer is empty.
+ *
+ * \defgroup xMessageBufferNextLengthBytes xMessageBufferNextLengthBytes
+ * \ingroup MessageBufferManagement
+ */
+#define xMessageBufferNextLengthBytes( xMessageBuffer ) xStreamBufferNextMessageLengthBytes( ( StreamBufferHandle_t ) xMessageBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * message_buffer.h
+ *
+
+BaseType_t xMessageBufferSendCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
+

+ *
+ * For advanced users only.
+ *
+ * The sbSEND_COMPLETED() macro is called from within the FreeRTOS APIs when
+ * data is sent to a message buffer or stream buffer.  If there was a task that
+ * was blocked on the message or stream buffer waiting for data to arrive then
+ * the sbSEND_COMPLETED() macro sends a notification to the task to remove it
+ * from the Blocked state.  xMessageBufferSendCompletedFromISR() does the same
+ * thing.  It is provided to enable application writers to implement their own
+ * version of sbSEND_COMPLETED(), and MUST NOT BE USED AT ANY OTHER TIME.
+ *
+ * See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
+ * additional information.
+ *
+ * @param xStreamBuffer The handle of the stream buffer to which data was
+ * written.
+ *
+ * @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
+ * initialised to pdFALSE before it is passed into
+ * xMessageBufferSendCompletedFromISR().  If calling
+ * xMessageBufferSendCompletedFromISR() removes a task from the Blocked state,
+ * and the task has a priority above the priority of the currently running task,
+ * then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
+ * context switch should be performed before exiting the ISR.
+ *
+ * @return If a task was removed from the Blocked state then pdTRUE is returned.
+ * Otherwise pdFALSE is returned.
+ *
+ * \defgroup xMessageBufferSendCompletedFromISR xMessageBufferSendCompletedFromISR
+ * \ingroup StreamBufferManagement
+ */
+#define xMessageBufferSendCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferSendCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
+
+/**
+ * message_buffer.h
+ *
+
+BaseType_t xMessageBufferReceiveCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
+

+ *
+ * For advanced users only.
+ *
+ * The sbRECEIVE_COMPLETED() macro is called from within the FreeRTOS APIs when
+ * data is read out of a message buffer or stream buffer.  If there was a task
+ * that was blocked on the message or stream buffer waiting for data to arrive
+ * then the sbRECEIVE_COMPLETED() macro sends a notification to the task to
+ * remove it from the Blocked state.  xMessageBufferReceiveCompletedFromISR()
+ * does the same thing.  It is provided to enable application writers to
+ * implement their own version of sbRECEIVE_COMPLETED(), and MUST NOT BE USED AT
+ * ANY OTHER TIME.
+ *
+ * See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
+ * additional information.
+ *
+ * @param xStreamBuffer The handle of the stream buffer from which data was
+ * read.
+ *
+ * @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
+ * initialised to pdFALSE before it is passed into
+ * xMessageBufferReceiveCompletedFromISR().  If calling
+ * xMessageBufferReceiveCompletedFromISR() removes a task from the Blocked state,
+ * and the task has a priority above the priority of the currently running task,
+ * then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
+ * context switch should be performed before exiting the ISR.
+ *
+ * @return If a task was removed from the Blocked state then pdTRUE is returned.
+ * Otherwise pdFALSE is returned.
+ *
+ * \defgroup xMessageBufferReceiveCompletedFromISR xMessageBufferReceiveCompletedFromISR
+ * \ingroup StreamBufferManagement
+ */
+#define xMessageBufferReceiveCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferReceiveCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
+
+#if defined( __cplusplus )
+} /* extern "C" */
+#endif
+
+#endif	/* !defined( FREERTOS_MESSAGE_BUFFER_H ) */
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h
new file mode 100644
index 0000000..79a185b
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h
@@ -0,0 +1,160 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/*
+ * When the MPU is used the standard (non MPU) API functions are mapped to
+ * equivalents that start "MPU_", the prototypes for which are defined in this
+ * header files.  This will cause the application code to call the MPU_ version
+ * which wraps the non-MPU version with privilege promoting then demoting code,
+ * so the kernel code always runs will full privileges.
+ */
+
+
+#ifndef MPU_PROTOTYPES_H
+#define MPU_PROTOTYPES_H
+
+/* MPU versions of tasks.h API functions. */
+BaseType_t MPU_xTaskCreate( TaskFunction_t pxTaskCode, const char * const pcName, const uint16_t usStackDepth, void * const pvParameters, UBaseType_t uxPriority, TaskHandle_t * const pxCreatedTask ) FREERTOS_SYSTEM_CALL;
+TaskHandle_t MPU_xTaskCreateStatic( TaskFunction_t pxTaskCode, const char * const pcName, const uint32_t ulStackDepth, void * const pvParameters, UBaseType_t uxPriority, StackType_t * const puxStackBuffer, StaticTask_t * const pxTaskBuffer ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskCreateRestrictedStatic( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskDelete( TaskHandle_t xTaskToDelete ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskDelay( const TickType_t xTicksToDelay ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskAbortDelay( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxTaskPriorityGet( const TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
+eTaskState MPU_eTaskGetState( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskSuspend( TaskHandle_t xTaskToSuspend ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskResume( TaskHandle_t xTaskToResume ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskStartScheduler( void ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskSuspendAll( void ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskResumeAll( void ) FREERTOS_SYSTEM_CALL;
+TickType_t MPU_xTaskGetTickCount( void ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxTaskGetNumberOfTasks( void ) FREERTOS_SYSTEM_CALL;
+char * MPU_pcTaskGetName( TaskHandle_t xTaskToQuery ) FREERTOS_SYSTEM_CALL;
+TaskHandle_t MPU_xTaskGetHandle( const char *pcNameToQuery ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxTaskGetStackHighWaterMark( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
+configSTACK_DEPTH_TYPE MPU_uxTaskGetStackHighWaterMark2( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction ) FREERTOS_SYSTEM_CALL;
+TaskHookFunction_t MPU_xTaskGetApplicationTaskTag( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue ) FREERTOS_SYSTEM_CALL;
+void * MPU_pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter ) FREERTOS_SYSTEM_CALL;
+TaskHandle_t MPU_xTaskGetIdleTaskHandle( void ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime ) FREERTOS_SYSTEM_CALL;
+uint32_t MPU_ulTaskGetIdleRunTimeCounter( void ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskList( char * pcWriteBuffer ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskGetRunTimeStats( char *pcWriteBuffer ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+uint32_t MPU_ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskNotifyStateClear( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
+uint32_t MPU_ulTaskNotifyValueClear( TaskHandle_t xTask, uint32_t ulBitsToClear ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskIncrementTick( void ) FREERTOS_SYSTEM_CALL;
+TaskHandle_t MPU_xTaskGetCurrentTaskHandle( void ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskSetTimeOutState( TimeOut_t * const pxTimeOut ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait ) FREERTOS_SYSTEM_CALL;
+void MPU_vTaskMissedYield( void ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskGetSchedulerState( void ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTaskCatchUpTicks( TickType_t xTicksToCatchUp ) FREERTOS_SYSTEM_CALL;
+
+/* MPU versions of queue.h API functions. */
+BaseType_t MPU_xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueueReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueuePeek( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueueSemaphoreTake( QueueHandle_t xQueue, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxQueueMessagesWaiting( const QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxQueueSpacesAvailable( const QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
+void MPU_vQueueDelete( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
+QueueHandle_t MPU_xQueueCreateMutex( const uint8_t ucQueueType ) FREERTOS_SYSTEM_CALL;
+QueueHandle_t MPU_xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue ) FREERTOS_SYSTEM_CALL;
+QueueHandle_t MPU_xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount ) FREERTOS_SYSTEM_CALL;
+QueueHandle_t MPU_xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue ) FREERTOS_SYSTEM_CALL;
+TaskHandle_t MPU_xQueueGetMutexHolder( QueueHandle_t xSemaphore ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueueGiveMutexRecursive( QueueHandle_t pxMutex ) FREERTOS_SYSTEM_CALL;
+void MPU_vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcName ) FREERTOS_SYSTEM_CALL;
+void MPU_vQueueUnregisterQueue( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
+const char * MPU_pcQueueGetName( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
+QueueHandle_t MPU_xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType ) FREERTOS_SYSTEM_CALL;
+QueueHandle_t MPU_xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType ) FREERTOS_SYSTEM_CALL;
+QueueSetHandle_t MPU_xQueueCreateSet( const UBaseType_t uxEventQueueLength ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) FREERTOS_SYSTEM_CALL;
+QueueSetMemberHandle_t MPU_xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue ) FREERTOS_SYSTEM_CALL;
+void MPU_vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxQueueGetQueueNumber( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
+uint8_t MPU_ucQueueGetQueueType( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
+
+/* MPU versions of timers.h API functions. */
+TimerHandle_t MPU_xTimerCreate( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction ) FREERTOS_SYSTEM_CALL;
+TimerHandle_t MPU_xTimerCreateStatic( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction, StaticTimer_t *pxTimerBuffer ) FREERTOS_SYSTEM_CALL;
+void * MPU_pvTimerGetTimerID( const TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
+void MPU_vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTimerIsTimerActive( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
+TaskHandle_t MPU_xTimerGetTimerDaemonTaskHandle( void ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+const char * MPU_pcTimerGetName( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
+void MPU_vTimerSetReloadMode( TimerHandle_t xTimer, const UBaseType_t uxAutoReload ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxTimerGetReloadMode( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
+TickType_t MPU_xTimerGetPeriod( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
+TickType_t MPU_xTimerGetExpiryTime( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTimerCreateTimerTask( void ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+
+/* MPU versions of event_group.h API functions. */
+EventGroupHandle_t MPU_xEventGroupCreate( void ) FREERTOS_SYSTEM_CALL;
+EventGroupHandle_t MPU_xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ) FREERTOS_SYSTEM_CALL;
+EventBits_t MPU_xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+EventBits_t MPU_xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) FREERTOS_SYSTEM_CALL;
+EventBits_t MPU_xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) FREERTOS_SYSTEM_CALL;
+EventBits_t MPU_xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+void MPU_vEventGroupDelete( EventGroupHandle_t xEventGroup ) FREERTOS_SYSTEM_CALL;
+UBaseType_t MPU_uxEventGroupGetNumber( void* xEventGroup ) FREERTOS_SYSTEM_CALL;
+
+/* MPU versions of message/stream_buffer.h API functions. */
+size_t MPU_xStreamBufferSend( StreamBufferHandle_t xStreamBuffer, const void *pvTxData, size_t xDataLengthBytes, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+size_t MPU_xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer, void *pvRxData, size_t xBufferLengthBytes, TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
+size_t MPU_xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
+void MPU_vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
+size_t MPU_xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
+size_t MPU_xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
+BaseType_t MPU_xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel ) FREERTOS_SYSTEM_CALL;
+StreamBufferHandle_t MPU_xStreamBufferGenericCreate( size_t xBufferSizeBytes, size_t xTriggerLevelBytes, BaseType_t xIsMessageBuffer ) FREERTOS_SYSTEM_CALL;
+StreamBufferHandle_t MPU_xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes, size_t xTriggerLevelBytes, BaseType_t xIsMessageBuffer, uint8_t * const pucStreamBufferStorageArea, StaticStreamBuffer_t * const pxStaticStreamBuffer ) FREERTOS_SYSTEM_CALL;
+
+
+
+#endif /* MPU_PROTOTYPES_H */
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h
new file mode 100644
index 0000000..87a2f2c
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h
@@ -0,0 +1,189 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef MPU_WRAPPERS_H
+#define MPU_WRAPPERS_H
+
+/* This file redefines API functions to be called through a wrapper macro, but
+only for ports that are using the MPU. */
+#ifdef portUSING_MPU_WRAPPERS
+
+	/* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is
+	included from queue.c or task.c to prevent it from having an effect within
+	those files. */
+	#ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+		/*
+		 * Map standard (non MPU) API functions to equivalents that start
+		 * "MPU_".  This will cause the application code to call the MPU_
+		 * version, which wraps the non-MPU version with privilege promoting
+		 * then demoting code, so the kernel code always runs will full
+		 * privileges.
+		 */
+
+		/* Map standard tasks.h API functions to the MPU equivalents. */
+		#define xTaskCreate								MPU_xTaskCreate
+		#define xTaskCreateStatic						MPU_xTaskCreateStatic
+		#define xTaskCreateRestricted					MPU_xTaskCreateRestricted
+		#define vTaskAllocateMPURegions					MPU_vTaskAllocateMPURegions
+		#define vTaskDelete								MPU_vTaskDelete
+		#define vTaskDelay								MPU_vTaskDelay
+		#define vTaskDelayUntil							MPU_vTaskDelayUntil
+		#define xTaskAbortDelay							MPU_xTaskAbortDelay
+		#define uxTaskPriorityGet						MPU_uxTaskPriorityGet
+		#define eTaskGetState							MPU_eTaskGetState
+		#define vTaskGetInfo							MPU_vTaskGetInfo
+		#define vTaskPrioritySet						MPU_vTaskPrioritySet
+		#define vTaskSuspend							MPU_vTaskSuspend
+		#define vTaskResume								MPU_vTaskResume
+		#define vTaskSuspendAll							MPU_vTaskSuspendAll
+		#define xTaskResumeAll							MPU_xTaskResumeAll
+		#define xTaskGetTickCount						MPU_xTaskGetTickCount
+		#define uxTaskGetNumberOfTasks					MPU_uxTaskGetNumberOfTasks
+		#define pcTaskGetName							MPU_pcTaskGetName
+		#define xTaskGetHandle							MPU_xTaskGetHandle
+		#define uxTaskGetStackHighWaterMark				MPU_uxTaskGetStackHighWaterMark
+		#define uxTaskGetStackHighWaterMark2			MPU_uxTaskGetStackHighWaterMark2
+		#define vTaskSetApplicationTaskTag				MPU_vTaskSetApplicationTaskTag
+		#define xTaskGetApplicationTaskTag				MPU_xTaskGetApplicationTaskTag
+		#define vTaskSetThreadLocalStoragePointer		MPU_vTaskSetThreadLocalStoragePointer
+		#define pvTaskGetThreadLocalStoragePointer		MPU_pvTaskGetThreadLocalStoragePointer
+		#define xTaskCallApplicationTaskHook			MPU_xTaskCallApplicationTaskHook
+		#define xTaskGetIdleTaskHandle					MPU_xTaskGetIdleTaskHandle
+		#define uxTaskGetSystemState					MPU_uxTaskGetSystemState
+		#define vTaskList								MPU_vTaskList
+		#define vTaskGetRunTimeStats					MPU_vTaskGetRunTimeStats
+		#define ulTaskGetIdleRunTimeCounter				MPU_ulTaskGetIdleRunTimeCounter
+		#define xTaskGenericNotify						MPU_xTaskGenericNotify
+		#define xTaskNotifyWait							MPU_xTaskNotifyWait
+		#define ulTaskNotifyTake						MPU_ulTaskNotifyTake
+		#define xTaskNotifyStateClear					MPU_xTaskNotifyStateClear
+		#define ulTaskNotifyValueClear					MPU_ulTaskNotifyValueClear
+		#define xTaskCatchUpTicks						MPU_xTaskCatchUpTicks
+
+		#define xTaskGetCurrentTaskHandle				MPU_xTaskGetCurrentTaskHandle
+		#define vTaskSetTimeOutState					MPU_vTaskSetTimeOutState
+		#define xTaskCheckForTimeOut					MPU_xTaskCheckForTimeOut
+		#define xTaskGetSchedulerState					MPU_xTaskGetSchedulerState
+
+		/* Map standard queue.h API functions to the MPU equivalents. */
+		#define xQueueGenericSend						MPU_xQueueGenericSend
+		#define xQueueReceive							MPU_xQueueReceive
+		#define xQueuePeek								MPU_xQueuePeek
+		#define xQueueSemaphoreTake						MPU_xQueueSemaphoreTake
+		#define uxQueueMessagesWaiting					MPU_uxQueueMessagesWaiting
+		#define uxQueueSpacesAvailable					MPU_uxQueueSpacesAvailable
+		#define vQueueDelete							MPU_vQueueDelete
+		#define xQueueCreateMutex						MPU_xQueueCreateMutex
+		#define xQueueCreateMutexStatic					MPU_xQueueCreateMutexStatic
+		#define xQueueCreateCountingSemaphore			MPU_xQueueCreateCountingSemaphore
+		#define xQueueCreateCountingSemaphoreStatic		MPU_xQueueCreateCountingSemaphoreStatic
+		#define xQueueGetMutexHolder					MPU_xQueueGetMutexHolder
+		#define xQueueTakeMutexRecursive				MPU_xQueueTakeMutexRecursive
+		#define xQueueGiveMutexRecursive				MPU_xQueueGiveMutexRecursive
+		#define xQueueGenericCreate						MPU_xQueueGenericCreate
+		#define xQueueGenericCreateStatic				MPU_xQueueGenericCreateStatic
+		#define xQueueCreateSet							MPU_xQueueCreateSet
+		#define xQueueAddToSet							MPU_xQueueAddToSet
+		#define xQueueRemoveFromSet						MPU_xQueueRemoveFromSet
+		#define xQueueSelectFromSet						MPU_xQueueSelectFromSet
+		#define xQueueGenericReset						MPU_xQueueGenericReset
+
+		#if( configQUEUE_REGISTRY_SIZE > 0 )
+			#define vQueueAddToRegistry						MPU_vQueueAddToRegistry
+			#define vQueueUnregisterQueue					MPU_vQueueUnregisterQueue
+			#define pcQueueGetName							MPU_pcQueueGetName
+		#endif
+
+		/* Map standard timer.h API functions to the MPU equivalents. */
+		#define xTimerCreate							MPU_xTimerCreate
+		#define xTimerCreateStatic						MPU_xTimerCreateStatic
+		#define pvTimerGetTimerID						MPU_pvTimerGetTimerID
+		#define vTimerSetTimerID						MPU_vTimerSetTimerID
+		#define xTimerIsTimerActive						MPU_xTimerIsTimerActive
+		#define xTimerGetTimerDaemonTaskHandle			MPU_xTimerGetTimerDaemonTaskHandle
+		#define xTimerPendFunctionCall					MPU_xTimerPendFunctionCall
+		#define pcTimerGetName							MPU_pcTimerGetName
+		#define vTimerSetReloadMode						MPU_vTimerSetReloadMode
+		#define uxTimerGetReloadMode					MPU_uxTimerGetReloadMode
+		#define xTimerGetPeriod							MPU_xTimerGetPeriod
+		#define xTimerGetExpiryTime						MPU_xTimerGetExpiryTime
+		#define xTimerGenericCommand					MPU_xTimerGenericCommand
+
+		/* Map standard event_group.h API functions to the MPU equivalents. */
+		#define xEventGroupCreate						MPU_xEventGroupCreate
+		#define xEventGroupCreateStatic					MPU_xEventGroupCreateStatic
+		#define xEventGroupWaitBits						MPU_xEventGroupWaitBits
+		#define xEventGroupClearBits					MPU_xEventGroupClearBits
+		#define xEventGroupSetBits						MPU_xEventGroupSetBits
+		#define xEventGroupSync							MPU_xEventGroupSync
+		#define vEventGroupDelete						MPU_vEventGroupDelete
+
+		/* Map standard message/stream_buffer.h API functions to the MPU
+		equivalents. */
+		#define xStreamBufferSend						MPU_xStreamBufferSend
+		#define xStreamBufferReceive					MPU_xStreamBufferReceive
+		#define xStreamBufferNextMessageLengthBytes		MPU_xStreamBufferNextMessageLengthBytes
+		#define vStreamBufferDelete						MPU_vStreamBufferDelete
+		#define xStreamBufferIsFull						MPU_xStreamBufferIsFull
+		#define xStreamBufferIsEmpty					MPU_xStreamBufferIsEmpty
+		#define xStreamBufferReset						MPU_xStreamBufferReset
+		#define xStreamBufferSpacesAvailable			MPU_xStreamBufferSpacesAvailable
+		#define xStreamBufferBytesAvailable				MPU_xStreamBufferBytesAvailable
+		#define xStreamBufferSetTriggerLevel			MPU_xStreamBufferSetTriggerLevel
+		#define xStreamBufferGenericCreate				MPU_xStreamBufferGenericCreate
+		#define xStreamBufferGenericCreateStatic		MPU_xStreamBufferGenericCreateStatic
+
+
+		/* Remove the privileged function macro, but keep the PRIVILEGED_DATA
+		macro so applications can place data in privileged access sections
+		(useful when using statically allocated objects). */
+		#define PRIVILEGED_FUNCTION
+		#define PRIVILEGED_DATA __attribute__((section("privileged_data")))
+		#define FREERTOS_SYSTEM_CALL
+
+	#else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
+
+		/* Ensure API functions go in the privileged execution section. */
+		#define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))
+		#define PRIVILEGED_DATA __attribute__((section("privileged_data")))
+		#define FREERTOS_SYSTEM_CALL __attribute__((section( "freertos_system_calls")))
+
+	#endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
+
+#else /* portUSING_MPU_WRAPPERS */
+
+	#define PRIVILEGED_FUNCTION
+	#define PRIVILEGED_DATA
+	#define FREERTOS_SYSTEM_CALL
+	#define portUSING_MPU_WRAPPERS 0
+
+#endif /* portUSING_MPU_WRAPPERS */
+
+
+#endif /* MPU_WRAPPERS_H */
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h
new file mode 100644
index 0000000..47ceab9
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h
@@ -0,0 +1,199 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/*-----------------------------------------------------------
+ * Portable layer API.  Each function must be defined for each port.
+ *----------------------------------------------------------*/
+
+#ifndef PORTABLE_H
+#define PORTABLE_H
+
+/* Each FreeRTOS port has a unique portmacro.h header file.  Originally a
+pre-processor definition was used to ensure the pre-processor found the correct
+portmacro.h file for the port being used.  That scheme was deprecated in favour
+of setting the compiler's include path such that it found the correct
+portmacro.h file - removing the need for the constant and allowing the
+portmacro.h file to be located anywhere in relation to the port being used.
+Purely for reasons of backward compatibility the old method is still valid, but
+to make it clear that new projects should not use it, support for the port
+specific constants has been moved into the deprecated_definitions.h header
+file. */
+#include "deprecated_definitions.h"
+
+/* If portENTER_CRITICAL is not defined then including deprecated_definitions.h
+did not result in a portmacro.h header file being included - and it should be
+included here.  In this case the path to the correct portmacro.h header file
+must be set in the compiler's include path. */
+#ifndef portENTER_CRITICAL
+	#include "portmacro.h"
+#endif
+
+#if portBYTE_ALIGNMENT == 32
+	#define portBYTE_ALIGNMENT_MASK ( 0x001f )
+#endif
+
+#if portBYTE_ALIGNMENT == 16
+	#define portBYTE_ALIGNMENT_MASK ( 0x000f )
+#endif
+
+#if portBYTE_ALIGNMENT == 8
+	#define portBYTE_ALIGNMENT_MASK ( 0x0007 )
+#endif
+
+#if portBYTE_ALIGNMENT == 4
+	#define portBYTE_ALIGNMENT_MASK	( 0x0003 )
+#endif
+
+#if portBYTE_ALIGNMENT == 2
+	#define portBYTE_ALIGNMENT_MASK	( 0x0001 )
+#endif
+
+#if portBYTE_ALIGNMENT == 1
+	#define portBYTE_ALIGNMENT_MASK	( 0x0000 )
+#endif
+
+#ifndef portBYTE_ALIGNMENT_MASK
+	#error "Invalid portBYTE_ALIGNMENT definition"
+#endif
+
+#ifndef portNUM_CONFIGURABLE_REGIONS
+	#define portNUM_CONFIGURABLE_REGIONS 1
+#endif
+
+#ifndef portHAS_STACK_OVERFLOW_CHECKING
+	#define portHAS_STACK_OVERFLOW_CHECKING 0
+#endif
+
+#ifndef portARCH_NAME
+	#define portARCH_NAME NULL
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "mpu_wrappers.h"
+
+/*
+ * Setup the stack of a new task so it is ready to be placed under the
+ * scheduler control.  The registers have to be placed on the stack in
+ * the order that the port expects to find them.
+ *
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+	#if( portHAS_STACK_OVERFLOW_CHECKING == 1 )
+		StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
+	#else
+		StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
+	#endif
+#else
+	#if( portHAS_STACK_OVERFLOW_CHECKING == 1 )
+		StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters ) PRIVILEGED_FUNCTION;
+	#else
+		StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) PRIVILEGED_FUNCTION;
+	#endif
+#endif
+
+/* Used by heap_5.c to define the start address and size of each memory region
+that together comprise the total FreeRTOS heap space. */
+typedef struct HeapRegion
+{
+	uint8_t *pucStartAddress;
+	size_t xSizeInBytes;
+} HeapRegion_t;
+
+/* Used to pass information about the heap out of vPortGetHeapStats(). */
+typedef struct xHeapStats
+{
+	size_t xAvailableHeapSpaceInBytes;		/* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
+	size_t xSizeOfLargestFreeBlockInBytes; 	/* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
+	size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
+	size_t xNumberOfFreeBlocks;				/* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
+	size_t xMinimumEverFreeBytesRemaining;	/* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
+	size_t xNumberOfSuccessfulAllocations;	/* The number of calls to pvPortMalloc() that have returned a valid memory block. */
+	size_t xNumberOfSuccessfulFrees;		/* The number of calls to vPortFree() that has successfully freed a block of memory. */
+} HeapStats_t;
+
+/*
+ * Used to define multiple heap regions for use by heap_5.c.  This function
+ * must be called before any calls to pvPortMalloc() - not creating a task,
+ * queue, semaphore, mutex, software timer, event group, etc. will result in
+ * pvPortMalloc being called.
+ *
+ * pxHeapRegions passes in an array of HeapRegion_t structures - each of which
+ * defines a region of memory that can be used as the heap.  The array is
+ * terminated by a HeapRegions_t structure that has a size of 0.  The region
+ * with the lowest start address must appear first in the array.
+ */
+void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;
+
+/*
+ * Returns a HeapStats_t structure filled with information about the current
+ * heap state.
+ */
+void vPortGetHeapStats( HeapStats_t *pxHeapStats );
+
+/*
+ * Map to the memory management routines required for the port.
+ */
+void *pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
+void vPortFree( void *pv ) PRIVILEGED_FUNCTION;
+void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
+size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
+size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Setup the hardware ready for the scheduler to take control.  This generally
+ * sets up a tick interrupt and sets timers for the correct tick frequency.
+ */
+BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
+ * the hardware is left in its original condition after the scheduler stops
+ * executing.
+ */
+void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The structures and methods of manipulating the MPU are contained within the
+ * port layer.
+ *
+ * Fills the xMPUSettings structure with the memory region information
+ * contained in xRegions.
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+	struct xMEMORY_REGION;
+	void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth ) PRIVILEGED_FUNCTION;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTABLE_H */
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h
new file mode 100644
index 0000000..75d4155
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h
@@ -0,0 +1,124 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef PROJDEFS_H
+#define PROJDEFS_H
+
+/*
+ * Defines the prototype to which task functions must conform.  Defined in this
+ * file to ensure the type is known before portable.h is included.
+ */
+typedef void (*TaskFunction_t)( void * );
+
+/* Converts a time in milliseconds to a time in ticks.  This macro can be
+overridden by a macro of the same name defined in FreeRTOSConfig.h in case the
+definition here is not suitable for your application. */
+#ifndef pdMS_TO_TICKS
+	#define pdMS_TO_TICKS( xTimeInMs ) ( ( TickType_t ) ( ( ( TickType_t ) ( xTimeInMs ) * ( TickType_t ) configTICK_RATE_HZ ) / ( TickType_t ) 1000 ) )
+#endif
+
+#define pdFALSE			( ( BaseType_t ) 0 )
+#define pdTRUE			( ( BaseType_t ) 1 )
+
+#define pdPASS			( pdTRUE )
+#define pdFAIL			( pdFALSE )
+#define errQUEUE_EMPTY	( ( BaseType_t ) 0 )
+#define errQUEUE_FULL	( ( BaseType_t ) 0 )
+
+/* FreeRTOS error definitions. */
+#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY	( -1 )
+#define errQUEUE_BLOCKED						( -4 )
+#define errQUEUE_YIELD							( -5 )
+
+/* Macros used for basic data corruption checks. */
+#ifndef configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES
+	#define configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES 0
+#endif
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	#define pdINTEGRITY_CHECK_VALUE 0x5a5a
+#else
+	#define pdINTEGRITY_CHECK_VALUE 0x5a5a5a5aUL
+#endif
+
+/* The following errno values are used by FreeRTOS+ components, not FreeRTOS
+itself. */
+#define pdFREERTOS_ERRNO_NONE			0	/* No errors */
+#define	pdFREERTOS_ERRNO_ENOENT			2	/* No such file or directory */
+#define	pdFREERTOS_ERRNO_EINTR			4	/* Interrupted system call */
+#define	pdFREERTOS_ERRNO_EIO			5	/* I/O error */
+#define	pdFREERTOS_ERRNO_ENXIO			6	/* No such device or address */
+#define	pdFREERTOS_ERRNO_EBADF			9	/* Bad file number */
+#define	pdFREERTOS_ERRNO_EAGAIN			11	/* No more processes */
+#define	pdFREERTOS_ERRNO_EWOULDBLOCK	11	/* Operation would block */
+#define	pdFREERTOS_ERRNO_ENOMEM			12	/* Not enough memory */
+#define	pdFREERTOS_ERRNO_EACCES			13	/* Permission denied */
+#define	pdFREERTOS_ERRNO_EFAULT			14	/* Bad address */
+#define	pdFREERTOS_ERRNO_EBUSY			16	/* Mount device busy */
+#define	pdFREERTOS_ERRNO_EEXIST			17	/* File exists */
+#define	pdFREERTOS_ERRNO_EXDEV			18	/* Cross-device link */
+#define	pdFREERTOS_ERRNO_ENODEV			19	/* No such device */
+#define	pdFREERTOS_ERRNO_ENOTDIR		20	/* Not a directory */
+#define	pdFREERTOS_ERRNO_EISDIR			21	/* Is a directory */
+#define	pdFREERTOS_ERRNO_EINVAL			22	/* Invalid argument */
+#define	pdFREERTOS_ERRNO_ENOSPC			28	/* No space left on device */
+#define	pdFREERTOS_ERRNO_ESPIPE			29	/* Illegal seek */
+#define	pdFREERTOS_ERRNO_EROFS			30	/* Read only file system */
+#define	pdFREERTOS_ERRNO_EUNATCH		42	/* Protocol driver not attached */
+#define	pdFREERTOS_ERRNO_EBADE			50	/* Invalid exchange */
+#define	pdFREERTOS_ERRNO_EFTYPE			79	/* Inappropriate file type or format */
+#define	pdFREERTOS_ERRNO_ENMFILE		89	/* No more files */
+#define	pdFREERTOS_ERRNO_ENOTEMPTY		90	/* Directory not empty */
+#define	pdFREERTOS_ERRNO_ENAMETOOLONG 	91	/* File or path name too long */
+#define	pdFREERTOS_ERRNO_EOPNOTSUPP		95	/* Operation not supported on transport endpoint */
+#define	pdFREERTOS_ERRNO_ENOBUFS		105	/* No buffer space available */
+#define	pdFREERTOS_ERRNO_ENOPROTOOPT	109	/* Protocol not available */
+#define	pdFREERTOS_ERRNO_EADDRINUSE		112	/* Address already in use */
+#define	pdFREERTOS_ERRNO_ETIMEDOUT		116	/* Connection timed out */
+#define	pdFREERTOS_ERRNO_EINPROGRESS	119	/* Connection already in progress */
+#define	pdFREERTOS_ERRNO_EALREADY		120	/* Socket already connected */
+#define	pdFREERTOS_ERRNO_EADDRNOTAVAIL 	125	/* Address not available */
+#define	pdFREERTOS_ERRNO_EISCONN		127	/* Socket is already connected */
+#define	pdFREERTOS_ERRNO_ENOTCONN		128	/* Socket is not connected */
+#define	pdFREERTOS_ERRNO_ENOMEDIUM		135	/* No medium inserted */
+#define	pdFREERTOS_ERRNO_EILSEQ			138	/* An invalid UTF-16 sequence was encountered. */
+#define	pdFREERTOS_ERRNO_ECANCELED		140	/* Operation canceled. */
+
+/* The following endian values are used by FreeRTOS+ components, not FreeRTOS
+itself. */
+#define pdFREERTOS_LITTLE_ENDIAN		0
+#define pdFREERTOS_BIG_ENDIAN			1
+
+/* Re-defining endian values for generic naming. */
+#define pdLITTLE_ENDIAN					pdFREERTOS_LITTLE_ENDIAN
+#define pdBIG_ENDIAN					pdFREERTOS_BIG_ENDIAN
+
+
+#endif /* PROJDEFS_H */
+
+
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h
new file mode 100644
index 0000000..fb82315
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h
@@ -0,0 +1,1655 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef QUEUE_H
+#define QUEUE_H
+
+#ifndef INC_FREERTOS_H
+	#error "include FreeRTOS.h" must appear in source files before "include queue.h"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "task.h"
+
+/**
+ * Type by which queues are referenced.  For example, a call to xQueueCreate()
+ * returns an QueueHandle_t variable that can then be used as a parameter to
+ * xQueueSend(), xQueueReceive(), etc.
+ */
+struct QueueDefinition; /* Using old naming convention so as not to break kernel aware debuggers. */
+typedef struct QueueDefinition * QueueHandle_t;
+
+/**
+ * Type by which queue sets are referenced.  For example, a call to
+ * xQueueCreateSet() returns an xQueueSet variable that can then be used as a
+ * parameter to xQueueSelectFromSet(), xQueueAddToSet(), etc.
+ */
+typedef struct QueueDefinition * QueueSetHandle_t;
+
+/**
+ * Queue sets can contain both queues and semaphores, so the
+ * QueueSetMemberHandle_t is defined as a type to be used where a parameter or
+ * return value can be either an QueueHandle_t or an SemaphoreHandle_t.
+ */
+typedef struct QueueDefinition * QueueSetMemberHandle_t;
+
+/* For internal use only. */
+#define	queueSEND_TO_BACK		( ( BaseType_t ) 0 )
+#define	queueSEND_TO_FRONT		( ( BaseType_t ) 1 )
+#define queueOVERWRITE			( ( BaseType_t ) 2 )
+
+/* For internal use only.  These definitions *must* match those in queue.c. */
+#define queueQUEUE_TYPE_BASE				( ( uint8_t ) 0U )
+#define queueQUEUE_TYPE_SET					( ( uint8_t ) 0U )
+#define queueQUEUE_TYPE_MUTEX 				( ( uint8_t ) 1U )
+#define queueQUEUE_TYPE_COUNTING_SEMAPHORE	( ( uint8_t ) 2U )
+#define queueQUEUE_TYPE_BINARY_SEMAPHORE	( ( uint8_t ) 3U )
+#define queueQUEUE_TYPE_RECURSIVE_MUTEX		( ( uint8_t ) 4U )
+
+/**
+ * queue. h
+ * 
+ QueueHandle_t xQueueCreate(
+							  UBaseType_t uxQueueLength,
+							  UBaseType_t uxItemSize
+						  );
+ * 

+ *
+ * Creates a new queue instance, and returns a handle by which the new queue
+ * can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, queues use two blocks of
+ * memory.  The first block is used to hold the queue's data structures.  The
+ * second block is used to hold items placed into the queue.  If a queue is
+ * created using xQueueCreate() then both blocks of memory are automatically
+ * dynamically allocated inside the xQueueCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a queue is created using
+ * xQueueCreateStatic() then the application writer must provide the memory that
+ * will get used by the queue.  xQueueCreateStatic() therefore allows a queue to
+ * be created without using any dynamic memory allocation.
+ *
+ * http://www.FreeRTOS.org/Embedded-RTOS-Queues.html
+ *
+ * @param uxQueueLength The maximum number of items that the queue can contain.
+ *
+ * @param uxItemSize The number of bytes each item in the queue will require.
+ * Items are queued by copy, not by reference, so this is the number of bytes
+ * that will be copied for each posted item.  Each item on the queue must be
+ * the same size.
+ *
+ * @return If the queue is successfully create then a handle to the newly
+ * created queue is returned.  If the queue cannot be created then 0 is
+ * returned.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ };
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+	if( xQueue1 == 0 )
+	{
+		// Queue was not created and must not be used.
+	}
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+	if( xQueue2 == 0 )
+	{
+		// Queue was not created and must not be used.
+	}
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueueCreate xQueueCreate
+ * \ingroup QueueManagement
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	#define xQueueCreate( uxQueueLength, uxItemSize ) xQueueGenericCreate( ( uxQueueLength ), ( uxItemSize ), ( queueQUEUE_TYPE_BASE ) )
+#endif
+
+/**
+ * queue. h
+ * 
+ QueueHandle_t xQueueCreateStatic(
+							  UBaseType_t uxQueueLength,
+							  UBaseType_t uxItemSize,
+							  uint8_t *pucQueueStorageBuffer,
+							  StaticQueue_t *pxQueueBuffer
+						  );
+ * 

+ *
+ * Creates a new queue instance, and returns a handle by which the new queue
+ * can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, queues use two blocks of
+ * memory.  The first block is used to hold the queue's data structures.  The
+ * second block is used to hold items placed into the queue.  If a queue is
+ * created using xQueueCreate() then both blocks of memory are automatically
+ * dynamically allocated inside the xQueueCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a queue is created using
+ * xQueueCreateStatic() then the application writer must provide the memory that
+ * will get used by the queue.  xQueueCreateStatic() therefore allows a queue to
+ * be created without using any dynamic memory allocation.
+ *
+ * http://www.FreeRTOS.org/Embedded-RTOS-Queues.html
+ *
+ * @param uxQueueLength The maximum number of items that the queue can contain.
+ *
+ * @param uxItemSize The number of bytes each item in the queue will require.
+ * Items are queued by copy, not by reference, so this is the number of bytes
+ * that will be copied for each posted item.  Each item on the queue must be
+ * the same size.
+ *
+ * @param pucQueueStorageBuffer If uxItemSize is not zero then
+ * pucQueueStorageBuffer must point to a uint8_t array that is at least large
+ * enough to hold the maximum number of items that can be in the queue at any
+ * one time - which is ( uxQueueLength * uxItemsSize ) bytes.  If uxItemSize is
+ * zero then pucQueueStorageBuffer can be NULL.
+ *
+ * @param pxQueueBuffer Must point to a variable of type StaticQueue_t, which
+ * will be used to hold the queue's data structure.
+ *
+ * @return If the queue is created then a handle to the created queue is
+ * returned.  If pxQueueBuffer is NULL then NULL is returned.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ };
+
+ #define QUEUE_LENGTH 10
+ #define ITEM_SIZE sizeof( uint32_t )
+
+ // xQueueBuffer will hold the queue structure.
+ StaticQueue_t xQueueBuffer;
+
+ // ucQueueStorage will hold the items posted to the queue.  Must be at least
+ // [(queue length) * ( queue item size)] bytes long.
+ uint8_t ucQueueStorage[ QUEUE_LENGTH * ITEM_SIZE ];
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( QUEUE_LENGTH, // The number of items the queue can hold.
+							ITEM_SIZE	  // The size of each item in the queue
+							&( ucQueueStorage[ 0 ] ), // The buffer that will hold the items in the queue.
+							&xQueueBuffer ); // The buffer that will hold the queue structure.
+
+	// The queue is guaranteed to be created successfully as no dynamic memory
+	// allocation is used.  Therefore xQueue1 is now a handle to a valid queue.
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueueCreateStatic xQueueCreateStatic
+ * \ingroup QueueManagement
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	#define xQueueCreateStatic( uxQueueLength, uxItemSize, pucQueueStorage, pxQueueBuffer ) xQueueGenericCreateStatic( ( uxQueueLength ), ( uxItemSize ), ( pucQueueStorage ), ( pxQueueBuffer ), ( queueQUEUE_TYPE_BASE ) )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueSendToToFront(
+								   QueueHandle_t	xQueue,
+								   const void		*pvItemToQueue,
+								   TickType_t		xTicksToWait
+							   );
+ * 

+ *
+ * Post an item to the front of a queue.  The item is queued by copy, not by
+ * reference.  This function must not be called from an interrupt service
+ * routine.  See xQueueSendFromISR () for an alternative which may be used
+ * in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full.  The call will return immediately if this is set to 0 and the
+ * queue is full.  The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueSendToFront( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueSendToFront( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+	}
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_FRONT )
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueSendToBack(
+								   QueueHandle_t	xQueue,
+								   const void		*pvItemToQueue,
+								   TickType_t		xTicksToWait
+							   );
+ * 

+ *
+ * This is a macro that calls xQueueGenericSend().
+ *
+ * Post an item to the back of a queue.  The item is queued by copy, not by
+ * reference.  This function must not be called from an interrupt service
+ * routine.  See xQueueSendFromISR () for an alternative which may be used
+ * in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full.  The call will return immediately if this is set to 0 and the queue
+ * is full.  The  time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueSendToBack( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueSendToBack( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+	}
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueSend(
+							  QueueHandle_t xQueue,
+							  const void * pvItemToQueue,
+							  TickType_t xTicksToWait
+						 );
+ * 

+ *
+ * This is a macro that calls xQueueGenericSend().  It is included for
+ * backward compatibility with versions of FreeRTOS.org that did not
+ * include the xQueueSendToFront() and xQueueSendToBack() macros.  It is
+ * equivalent to xQueueSendToBack().
+ *
+ * Post an item on a queue.  The item is queued by copy, not by reference.
+ * This function must not be called from an interrupt service routine.
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full.  The call will return immediately if this is set to 0 and the
+ * queue is full.  The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueSend( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueSend( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+	}
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueOverwrite(
+							  QueueHandle_t xQueue,
+							  const void * pvItemToQueue
+						 );
+ * 

+ *
+ * Only for use with queues that have a length of one - so the queue is either
+ * empty or full.
+ *
+ * Post an item on a queue.  If the queue is already full then overwrite the
+ * value held in the queue.  The item is queued by copy, not by reference.
+ *
+ * This function must not be called from an interrupt service routine.
+ * See xQueueOverwriteFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle of the queue to which the data is being sent.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @return xQueueOverwrite() is a macro that calls xQueueGenericSend(), and
+ * therefore has the same return values as xQueueSendToFront().  However, pdPASS
+ * is the only value that can be returned because xQueueOverwrite() will write
+ * to the queue even when the queue is already full.
+ *
+ * Example usage:
+   
+
+ void vFunction( void *pvParameters )
+ {
+ QueueHandle_t xQueue;
+ uint32_t ulVarToSend, ulValReceived;
+
+	// Create a queue to hold one uint32_t value.  It is strongly
+	// recommended *not* to use xQueueOverwrite() on queues that can
+	// contain more than one value, and doing so will trigger an assertion
+	// if configASSERT() is defined.
+	xQueue = xQueueCreate( 1, sizeof( uint32_t ) );
+
+	// Write the value 10 to the queue using xQueueOverwrite().
+	ulVarToSend = 10;
+	xQueueOverwrite( xQueue, &ulVarToSend );
+
+	// Peeking the queue should now return 10, but leave the value 10 in
+	// the queue.  A block time of zero is used as it is known that the
+	// queue holds a value.
+	ulValReceived = 0;
+	xQueuePeek( xQueue, &ulValReceived, 0 );
+
+	if( ulValReceived != 10 )
+	{
+		// Error unless the item was removed by a different task.
+	}
+
+	// The queue is still full.  Use xQueueOverwrite() to overwrite the
+	// value held in the queue with 100.
+	ulVarToSend = 100;
+	xQueueOverwrite( xQueue, &ulVarToSend );
+
+	// This time read from the queue, leaving the queue empty once more.
+	// A block time of 0 is used again.
+	xQueueReceive( xQueue, &ulValReceived, 0 );
+
+	// The value read should be the last value written, even though the
+	// queue was already full when the value was written.
+	if( ulValReceived != 100 )
+	{
+		// Error!
+	}
+
+	// ...
+}
+ 

+ * \defgroup xQueueOverwrite xQueueOverwrite
+ * \ingroup QueueManagement
+ */
+#define xQueueOverwrite( xQueue, pvItemToQueue ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), 0, queueOVERWRITE )
+
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueGenericSend(
+									QueueHandle_t xQueue,
+									const void * pvItemToQueue,
+									TickType_t xTicksToWait
+									BaseType_t xCopyPosition
+								);
+ * 

+ *
+ * It is preferred that the macros xQueueSend(), xQueueSendToFront() and
+ * xQueueSendToBack() are used in place of calling this function directly.
+ *
+ * Post an item on a queue.  The item is queued by copy, not by reference.
+ * This function must not be called from an interrupt service routine.
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full.  The call will return immediately if this is set to 0 and the
+ * queue is full.  The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item
+ * at the front of the queue (for high priority messages).
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueGenericSend( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10, queueSEND_TO_BACK ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueGenericSend( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0, queueSEND_TO_BACK );
+	}
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueuePeek(
+							 QueueHandle_t xQueue,
+							 void * const pvBuffer,
+							 TickType_t xTicksToWait
+						 );

+ *
+ * Receive an item from a queue without removing the item from the queue.
+ * The item is received by copy so a buffer of adequate size must be
+ * provided.  The number of bytes copied into the buffer was defined when
+ * the queue was created.
+ *
+ * Successfully received items remain on the queue so will be returned again
+ * by the next call, or a call to xQueueReceive().
+ *
+ * This macro must not be used in an interrupt service routine.  See
+ * xQueuePeekFromISR() for an alternative that can be called from an interrupt
+ * service routine.
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call.	 The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ * xQueuePeek() will return immediately if xTicksToWait is 0 and the queue
+ * is empty.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+	if( xQueue == 0 )
+	{
+		// Failed to create the queue.
+	}
+
+	// ...
+
+	// Send a pointer to a struct AMessage object.  Don't block if the
+	// queue is already full.
+	pxMessage = & xMessage;
+	xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+	// ... Rest of task code.
+ }
+
+ // Task to peek the data from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+	if( xQueue != 0 )
+	{
+		// Peek a message on the created queue.  Block for 10 ticks if a
+		// message is not immediately available.
+		if( xQueuePeek( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+		{
+			// pcRxedMessage now points to the struct AMessage variable posted
+			// by vATask, but the item still remains on the queue.
+		}
+	}
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueuePeek xQueuePeek
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueuePeek( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueuePeekFromISR(
+									QueueHandle_t xQueue,
+									void *pvBuffer,
+								);

+ *
+ * A version of xQueuePeek() that can be called from an interrupt service
+ * routine (ISR).
+ *
+ * Receive an item from a queue without removing the item from the queue.
+ * The item is received by copy so a buffer of adequate size must be
+ * provided.  The number of bytes copied into the buffer was defined when
+ * the queue was created.
+ *
+ * Successfully received items remain on the queue so will be returned again
+ * by the next call, or a call to xQueueReceive().
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * \defgroup xQueuePeekFromISR xQueuePeekFromISR
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * const pvBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueReceive(
+								 QueueHandle_t xQueue,
+								 void *pvBuffer,
+								 TickType_t xTicksToWait
+							);

+ *
+ * Receive an item from a queue.  The item is received by copy so a buffer of
+ * adequate size must be provided.  The number of bytes copied into the buffer
+ * was defined when the queue was created.
+ *
+ * Successfully received items are removed from the queue.
+ *
+ * This function must not be used in an interrupt service routine.  See
+ * xQueueReceiveFromISR for an alternative that can.
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call.	 xQueueReceive() will return immediately if xTicksToWait
+ * is zero and the queue is empty.  The time is defined in tick periods so the
+ * constant portTICK_PERIOD_MS should be used to convert to real time if this is
+ * required.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+   
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+	if( xQueue == 0 )
+	{
+		// Failed to create the queue.
+	}
+
+	// ...
+
+	// Send a pointer to a struct AMessage object.  Don't block if the
+	// queue is already full.
+	pxMessage = & xMessage;
+	xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+	// ... Rest of task code.
+ }
+
+ // Task to receive from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+	if( xQueue != 0 )
+	{
+		// Receive a message on the created queue.  Block for 10 ticks if a
+		// message is not immediately available.
+		if( xQueueReceive( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+		{
+			// pcRxedMessage now points to the struct AMessage variable posted
+			// by vATask.
+		}
+	}
+
+	// ... Rest of task code.
+ }
+ 

+ * \defgroup xQueueReceive xQueueReceive
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue );

+ *
+ * Return the number of messages stored in a queue.
+ *
+ * @param xQueue A handle to the queue being queried.
+ *
+ * @return The number of messages available in the queue.
+ *
+ * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting
+ * \ingroup QueueManagement
+ */
+UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue );

+ *
+ * Return the number of free spaces available in a queue.  This is equal to the
+ * number of items that can be sent to the queue before the queue becomes full
+ * if no items are removed.
+ *
+ * @param xQueue A handle to the queue being queried.
+ *
+ * @return The number of spaces available in the queue.
+ *
+ * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting
+ * \ingroup QueueManagement
+ */
+UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
void vQueueDelete( QueueHandle_t xQueue );

+ *
+ * Delete a queue - freeing all the memory allocated for storing of items
+ * placed on the queue.
+ *
+ * @param xQueue A handle to the queue to be deleted.
+ *
+ * \defgroup vQueueDelete vQueueDelete
+ * \ingroup QueueManagement
+ */
+void vQueueDelete( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueSendToFrontFromISR(
+										 QueueHandle_t xQueue,
+										 const void *pvItemToQueue,
+										 BaseType_t *pxHigherPriorityTaskWoken
+									  );
+ 

+ *
+ * This is a macro that calls xQueueGenericSendFromISR().
+ *
+ * Post an item to the front of a queue.  It is safe to use this macro from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR.  In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendToFrontFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task.  If xQueueSendToFromFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+   
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPrioritTaskWoken;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWoken = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post the byte.
+		xQueueSendToFrontFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.
+	if( xHigherPriorityTaskWoken )
+	{
+		taskYIELD ();
+	}
+ }
+ 

+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToFrontFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_FRONT )
+
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueSendToBackFromISR(
+										 QueueHandle_t xQueue,
+										 const void *pvItemToQueue,
+										 BaseType_t *pxHigherPriorityTaskWoken
+									  );
+ 

+ *
+ * This is a macro that calls xQueueGenericSendFromISR().
+ *
+ * Post an item to the back of a queue.  It is safe to use this macro from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR.  In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendToBackFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task.  If xQueueSendToBackFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+   
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWoken;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWoken = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post the byte.
+		xQueueSendToBackFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.
+	if( xHigherPriorityTaskWoken )
+	{
+		taskYIELD ();
+	}
+ }
+ 

+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToBackFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueOverwriteFromISR(
+							  QueueHandle_t xQueue,
+							  const void * pvItemToQueue,
+							  BaseType_t *pxHigherPriorityTaskWoken
+						 );
+ * 

+ *
+ * A version of xQueueOverwrite() that can be used in an interrupt service
+ * routine (ISR).
+ *
+ * Only for use with queues that can hold a single item - so the queue is either
+ * empty or full.
+ *
+ * Post an item on a queue.  If the queue is already full then overwrite the
+ * value held in the queue.  The item is queued by copy, not by reference.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueOverwriteFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task.  If xQueueOverwriteFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return xQueueOverwriteFromISR() is a macro that calls
+ * xQueueGenericSendFromISR(), and therefore has the same return values as
+ * xQueueSendToFrontFromISR().  However, pdPASS is the only value that can be
+ * returned because xQueueOverwriteFromISR() will write to the queue even when
+ * the queue is already full.
+ *
+ * Example usage:
+   
+
+ QueueHandle_t xQueue;
+
+ void vFunction( void *pvParameters )
+ {
+ 	// Create a queue to hold one uint32_t value.  It is strongly
+	// recommended *not* to use xQueueOverwriteFromISR() on queues that can
+	// contain more than one value, and doing so will trigger an assertion
+	// if configASSERT() is defined.
+	xQueue = xQueueCreate( 1, sizeof( uint32_t ) );
+}
+
+void vAnInterruptHandler( void )
+{
+// xHigherPriorityTaskWoken must be set to pdFALSE before it is used.
+BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+uint32_t ulVarToSend, ulValReceived;
+
+	// Write the value 10 to the queue using xQueueOverwriteFromISR().
+	ulVarToSend = 10;
+	xQueueOverwriteFromISR( xQueue, &ulVarToSend, &xHigherPriorityTaskWoken );
+
+	// The queue is full, but calling xQueueOverwriteFromISR() again will still
+	// pass because the value held in the queue will be overwritten with the
+	// new value.
+	ulVarToSend = 100;
+	xQueueOverwriteFromISR( xQueue, &ulVarToSend, &xHigherPriorityTaskWoken );
+
+	// Reading from the queue will now return 100.
+
+	// ...
+
+	if( xHigherPrioritytaskWoken == pdTRUE )
+	{
+		// Writing to the queue caused a task to unblock and the unblocked task
+		// has a priority higher than or equal to the priority of the currently
+		// executing task (the task this interrupt interrupted).  Perform a context
+		// switch so this interrupt returns directly to the unblocked task.
+		portYIELD_FROM_ISR(); // or portEND_SWITCHING_ISR() depending on the port.
+	}
+}
+ 

+ * \defgroup xQueueOverwriteFromISR xQueueOverwriteFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueOverwriteFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueOVERWRITE )
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueSendFromISR(
+									 QueueHandle_t xQueue,
+									 const void *pvItemToQueue,
+									 BaseType_t *pxHigherPriorityTaskWoken
+								);
+ 

+ *
+ * This is a macro that calls xQueueGenericSendFromISR().  It is included
+ * for backward compatibility with versions of FreeRTOS.org that did not
+ * include the xQueueSendToBackFromISR() and xQueueSendToFrontFromISR()
+ * macros.
+ *
+ * Post an item to the back of a queue.  It is safe to use this function from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR.  In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task.  If xQueueSendFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+   
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWoken;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWoken = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post the byte.
+		xQueueSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.
+	if( xHigherPriorityTaskWoken )
+	{
+		// Actual macro used here is port specific.
+		portYIELD_FROM_ISR ();
+	}
+ }
+ 

+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueGenericSendFromISR(
+										   QueueHandle_t		xQueue,
+										   const	void	*pvItemToQueue,
+										   BaseType_t	*pxHigherPriorityTaskWoken,
+										   BaseType_t	xCopyPosition
+									   );
+ 

+ *
+ * It is preferred that the macros xQueueSendFromISR(),
+ * xQueueSendToFrontFromISR() and xQueueSendToBackFromISR() be used in place
+ * of calling this function directly.  xQueueGiveFromISR() is an
+ * equivalent for use by semaphores that don't actually copy any data.
+ *
+ * Post an item on a queue.  It is safe to use this function from within an
+ * interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR.  In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue.  The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueGenericSendFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task.  If xQueueGenericSendFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item
+ * at the front of the queue (for high priority messages).
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+   
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWokenByPost;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWokenByPost = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post each byte.
+		xQueueGenericSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWokenByPost, queueSEND_TO_BACK );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.  Note that the
+	// name of the yield function required is port specific.
+	if( xHigherPriorityTaskWokenByPost )
+	{
+		portYIELD_FROM_ISR();
+	}
+ }
+ 

+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * 
+ BaseType_t xQueueReceiveFromISR(
+									   QueueHandle_t	xQueue,
+									   void	*pvBuffer,
+									   BaseType_t *pxTaskWoken
+								   );
+ * 

+ *
+ * Receive an item from a queue.  It is safe to use this function from within an
+ * interrupt service routine.
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param pxTaskWoken A task may be blocked waiting for space to become
+ * available on the queue.  If xQueueReceiveFromISR causes such a task to
+ * unblock *pxTaskWoken will get set to pdTRUE, otherwise *pxTaskWoken will
+ * remain unchanged.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+   
+
+ QueueHandle_t xQueue;
+
+ // Function to create a queue and post some values.
+ void vAFunction( void *pvParameters )
+ {
+ char cValueToPost;
+ const TickType_t xTicksToWait = ( TickType_t )0xff;
+
+	// Create a queue capable of containing 10 characters.
+	xQueue = xQueueCreate( 10, sizeof( char ) );
+	if( xQueue == 0 )
+	{
+		// Failed to create the queue.
+	}
+
+	// ...
+
+	// Post some characters that will be used within an ISR.  If the queue
+	// is full then this task will block for xTicksToWait ticks.
+	cValueToPost = 'a';
+	xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+	cValueToPost = 'b';
+	xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+
+	// ... keep posting characters ... this task may block when the queue
+	// becomes full.
+
+	cValueToPost = 'c';
+	xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+ }
+
+ // ISR that outputs all the characters received on the queue.
+ void vISR_Routine( void )
+ {
+ BaseType_t xTaskWokenByReceive = pdFALSE;
+ char cRxedChar;
+
+	while( xQueueReceiveFromISR( xQueue, ( void * ) &cRxedChar, &xTaskWokenByReceive) )
+	{
+		// A character was received.  Output the character now.
+		vOutputCharacter( cRxedChar );
+
+		// If removing the character from the queue woke the task that was
+		// posting onto the queue cTaskWokenByReceive will have been set to
+		// pdTRUE.  No matter how many times this loop iterates only one
+		// task will be woken.
+	}
+
+	if( cTaskWokenByPost != ( char ) pdFALSE;
+	{
+		taskYIELD ();
+	}
+ }
+ 

+ * \defgroup xQueueReceiveFromISR xQueueReceiveFromISR
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/*
+ * Utilities to query queues that are safe to use from an ISR.  These utilities
+ * should be used only from witin an ISR, or within a critical section.
+ */
+BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * The functions defined above are for passing data to and from tasks.  The
+ * functions below are the equivalents for passing data to and from
+ * co-routines.
+ *
+ * These functions are called from the co-routine macro implementation and
+ * should not be called directly from application code.  Instead use the macro
+ * wrappers defined within croutine.h.
+ */
+BaseType_t xQueueCRSendFromISR( QueueHandle_t xQueue, const void *pvItemToQueue, BaseType_t xCoRoutinePreviouslyWoken );
+BaseType_t xQueueCRReceiveFromISR( QueueHandle_t xQueue, void *pvBuffer, BaseType_t *pxTaskWoken );
+BaseType_t xQueueCRSend( QueueHandle_t xQueue, const void *pvItemToQueue, TickType_t xTicksToWait );
+BaseType_t xQueueCRReceive( QueueHandle_t xQueue, void *pvBuffer, TickType_t xTicksToWait );
+
+/*
+ * For internal use only.  Use xSemaphoreCreateMutex(),
+ * xSemaphoreCreateCounting() or xSemaphoreGetMutexHolder() instead of calling
+ * these functions directly.
+ */
+QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueSemaphoreTake( QueueHandle_t xQueue, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+TaskHandle_t xQueueGetMutexHolder( QueueHandle_t xSemaphore ) PRIVILEGED_FUNCTION;
+TaskHandle_t xQueueGetMutexHolderFromISR( QueueHandle_t xSemaphore ) PRIVILEGED_FUNCTION;
+
+/*
+ * For internal use only.  Use xSemaphoreTakeMutexRecursive() or
+ * xSemaphoreGiveMutexRecursive() instead of calling these functions directly.
+ */
+BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGiveMutexRecursive( QueueHandle_t xMutex ) PRIVILEGED_FUNCTION;
+
+/*
+ * Reset a queue back to its original empty state.  The return value is now
+ * obsolete and is always set to pdPASS.
+ */
+#define xQueueReset( xQueue ) xQueueGenericReset( xQueue, pdFALSE )
+
+/*
+ * The registry is provided as a means for kernel aware debuggers to
+ * locate queues, semaphores and mutexes.  Call vQueueAddToRegistry() add
+ * a queue, semaphore or mutex handle to the registry if you want the handle
+ * to be available to a kernel aware debugger.  If you are not using a kernel
+ * aware debugger then this function can be ignored.
+ *
+ * configQUEUE_REGISTRY_SIZE defines the maximum number of handles the
+ * registry can hold.  configQUEUE_REGISTRY_SIZE must be greater than 0
+ * within FreeRTOSConfig.h for the registry to be available.  Its value
+ * does not effect the number of queues, semaphores and mutexes that can be
+ * created - just the number that the registry can hold.
+ *
+ * @param xQueue The handle of the queue being added to the registry.  This
+ * is the handle returned by a call to xQueueCreate().  Semaphore and mutex
+ * handles can also be passed in here.
+ *
+ * @param pcName The name to be associated with the handle.  This is the
+ * name that the kernel aware debugger will display.  The queue registry only
+ * stores a pointer to the string - so the string must be persistent (global or
+ * preferably in ROM/Flash), not on the stack.
+ */
+#if( configQUEUE_REGISTRY_SIZE > 0 )
+	void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcQueueName ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif
+
+/*
+ * The registry is provided as a means for kernel aware debuggers to
+ * locate queues, semaphores and mutexes.  Call vQueueAddToRegistry() add
+ * a queue, semaphore or mutex handle to the registry if you want the handle
+ * to be available to a kernel aware debugger, and vQueueUnregisterQueue() to
+ * remove the queue, semaphore or mutex from the register.  If you are not using
+ * a kernel aware debugger then this function can be ignored.
+ *
+ * @param xQueue The handle of the queue being removed from the registry.
+ */
+#if( configQUEUE_REGISTRY_SIZE > 0 )
+	void vQueueUnregisterQueue( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * The queue registry is provided as a means for kernel aware debuggers to
+ * locate queues, semaphores and mutexes.  Call pcQueueGetName() to look
+ * up and return the name of a queue in the queue registry from the queue's
+ * handle.
+ *
+ * @param xQueue The handle of the queue the name of which will be returned.
+ * @return If the queue is in the registry then a pointer to the name of the
+ * queue is returned.  If the queue is not in the registry then NULL is
+ * returned.
+ */
+#if( configQUEUE_REGISTRY_SIZE > 0 )
+	const char *pcQueueGetName( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif
+
+/*
+ * Generic version of the function used to creaet a queue using dynamic memory
+ * allocation.  This is called by other functions and macros that create other
+ * RTOS objects that use the queue structure as their base.
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * Generic version of the function used to creaet a queue using dynamic memory
+ * allocation.  This is called by other functions and macros that create other
+ * RTOS objects that use the queue structure as their base.
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * Queue sets provide a mechanism to allow a task to block (pend) on a read
+ * operation from multiple queues or semaphores simultaneously.
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * A queue set must be explicitly created using a call to xQueueCreateSet()
+ * before it can be used.  Once created, standard FreeRTOS queues and semaphores
+ * can be added to the set using calls to xQueueAddToSet().
+ * xQueueSelectFromSet() is then used to determine which, if any, of the queues
+ * or semaphores contained in the set is in a state where a queue read or
+ * semaphore take operation would be successful.
+ *
+ * Note 1:  See the documentation on http://wwwFreeRTOS.org/RTOS-queue-sets.html
+ * for reasons why queue sets are very rarely needed in practice as there are
+ * simpler methods of blocking on multiple objects.
+ *
+ * Note 2:  Blocking on a queue set that contains a mutex will not cause the
+ * mutex holder to inherit the priority of the blocked task.
+ *
+ * Note 3:  An additional 4 bytes of RAM is required for each space in a every
+ * queue added to a queue set.  Therefore counting semaphores that have a high
+ * maximum count value should not be added to a queue set.
+ *
+ * Note 4:  A receive (in the case of a queue) or take (in the case of a
+ * semaphore) operation must not be performed on a member of a queue set unless
+ * a call to xQueueSelectFromSet() has first returned a handle to that set member.
+ *
+ * @param uxEventQueueLength Queue sets store events that occur on
+ * the queues and semaphores contained in the set.  uxEventQueueLength specifies
+ * the maximum number of events that can be queued at once.  To be absolutely
+ * certain that events are not lost uxEventQueueLength should be set to the
+ * total sum of the length of the queues added to the set, where binary
+ * semaphores and mutexes have a length of 1, and counting semaphores have a
+ * length set by their maximum count value.  Examples:
+ *  + If a queue set is to hold a queue of length 5, another queue of length 12,
+ *    and a binary semaphore, then uxEventQueueLength should be set to
+ *    (5 + 12 + 1), or 18.
+ *  + If a queue set is to hold three binary semaphores then uxEventQueueLength
+ *    should be set to (1 + 1 + 1 ), or 3.
+ *  + If a queue set is to hold a counting semaphore that has a maximum count of
+ *    5, and a counting semaphore that has a maximum count of 3, then
+ *    uxEventQueueLength should be set to (5 + 3), or 8.
+ *
+ * @return If the queue set is created successfully then a handle to the created
+ * queue set is returned.  Otherwise NULL is returned.
+ */
+QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength ) PRIVILEGED_FUNCTION;
+
+/*
+ * Adds a queue or semaphore to a queue set that was previously created by a
+ * call to xQueueCreateSet().
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * Note 1:  A receive (in the case of a queue) or take (in the case of a
+ * semaphore) operation must not be performed on a member of a queue set unless
+ * a call to xQueueSelectFromSet() has first returned a handle to that set member.
+ *
+ * @param xQueueOrSemaphore The handle of the queue or semaphore being added to
+ * the queue set (cast to an QueueSetMemberHandle_t type).
+ *
+ * @param xQueueSet The handle of the queue set to which the queue or semaphore
+ * is being added.
+ *
+ * @return If the queue or semaphore was successfully added to the queue set
+ * then pdPASS is returned.  If the queue could not be successfully added to the
+ * queue set because it is already a member of a different queue set then pdFAIL
+ * is returned.
+ */
+BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
+
+/*
+ * Removes a queue or semaphore from a queue set.  A queue or semaphore can only
+ * be removed from a set if the queue or semaphore is empty.
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * @param xQueueOrSemaphore The handle of the queue or semaphore being removed
+ * from the queue set (cast to an QueueSetMemberHandle_t type).
+ *
+ * @param xQueueSet The handle of the queue set in which the queue or semaphore
+ * is included.
+ *
+ * @return If the queue or semaphore was successfully removed from the queue set
+ * then pdPASS is returned.  If the queue was not in the queue set, or the
+ * queue (or semaphore) was not empty, then pdFAIL is returned.
+ */
+BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
+
+/*
+ * xQueueSelectFromSet() selects from the members of a queue set a queue or
+ * semaphore that either contains data (in the case of a queue) or is available
+ * to take (in the case of a semaphore).  xQueueSelectFromSet() effectively
+ * allows a task to block (pend) on a read operation on all the queues and
+ * semaphores in a queue set simultaneously.
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * Note 1:  See the documentation on http://wwwFreeRTOS.org/RTOS-queue-sets.html
+ * for reasons why queue sets are very rarely needed in practice as there are
+ * simpler methods of blocking on multiple objects.
+ *
+ * Note 2:  Blocking on a queue set that contains a mutex will not cause the
+ * mutex holder to inherit the priority of the blocked task.
+ *
+ * Note 3:  A receive (in the case of a queue) or take (in the case of a
+ * semaphore) operation must not be performed on a member of a queue set unless
+ * a call to xQueueSelectFromSet() has first returned a handle to that set member.
+ *
+ * @param xQueueSet The queue set on which the task will (potentially) block.
+ *
+ * @param xTicksToWait The maximum time, in ticks, that the calling task will
+ * remain in the Blocked state (with other tasks executing) to wait for a member
+ * of the queue set to be ready for a successful queue read or semaphore take
+ * operation.
+ *
+ * @return xQueueSelectFromSet() will return the handle of a queue (cast to
+ * a QueueSetMemberHandle_t type) contained in the queue set that contains data,
+ * or the handle of a semaphore (cast to a QueueSetMemberHandle_t type) contained
+ * in the queue set that is available, or NULL if no such queue or semaphore
+ * exists before before the specified block time expires.
+ */
+QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * A version of xQueueSelectFromSet() that can be used from an ISR.
+ */
+QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
+
+/* Not public API functions. */
+void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue ) PRIVILEGED_FUNCTION;
+void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber ) PRIVILEGED_FUNCTION;
+UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+uint8_t ucQueueGetQueueType( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* QUEUE_H */
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h
new file mode 100644
index 0000000..ff21a39
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h
@@ -0,0 +1,1140 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef SEMAPHORE_H
+#define SEMAPHORE_H
+
+#ifndef INC_FREERTOS_H
+	#error "include FreeRTOS.h" must appear in source files before "include semphr.h"
+#endif
+
+#include "queue.h"
+
+typedef QueueHandle_t SemaphoreHandle_t;
+
+#define semBINARY_SEMAPHORE_QUEUE_LENGTH	( ( uint8_t ) 1U )
+#define semSEMAPHORE_QUEUE_ITEM_LENGTH		( ( uint8_t ) 0U )
+#define semGIVE_BLOCK_TIME					( ( TickType_t ) 0U )
+
+
+/**
+ * semphr. h
+ * 
vSemaphoreCreateBinary( SemaphoreHandle_t xSemaphore )

+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a binary semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * This old vSemaphoreCreateBinary() macro is now deprecated in favour of the
+ * xSemaphoreCreateBinary() function.  Note that binary semaphores created using
+ * the vSemaphoreCreateBinary() macro are created in a state such that the
+ * first call to 'take' the semaphore would pass, whereas binary semaphores
+ * created using xSemaphoreCreateBinary() are created in a state such that the
+ * the semaphore must first be 'given' before it can be 'taken'.
+ *
+ * Macro that implements a semaphore by using the existing queue mechanism.
+ * The queue length is 1 as this is a binary semaphore.  The data size is 0
+ * as we don't want to actually store any data - we just want to know if the
+ * queue is empty or full.
+ *
+ * This type of semaphore can be used for pure synchronisation between tasks or
+ * between an interrupt and a task.  The semaphore need not be given back once
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while
+ * another continuously 'takes' the semaphore.  For this reason this type of
+ * semaphore does not use a priority inheritance mechanism.  For an alternative
+ * that does use priority inheritance see xSemaphoreCreateMutex().
+ *
+ * @param xSemaphore Handle to the created semaphore.  Should be of type SemaphoreHandle_t.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to vSemaphoreCreateBinary ().
+    // This is a macro so pass the variable in directly.
+    vSemaphoreCreateBinary( xSemaphore );
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+ 

+ * \defgroup vSemaphoreCreateBinary vSemaphoreCreateBinary
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	#define vSemaphoreCreateBinary( xSemaphore )																							\
+		{																																	\
+			( xSemaphore ) = xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE );	\
+			if( ( xSemaphore ) != NULL )																									\
+			{																																\
+				( void ) xSemaphoreGive( ( xSemaphore ) );																					\
+			}																																\
+		}
+#endif
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateBinary( void )

+ *
+ * Creates a new binary semaphore instance, and returns a handle by which the
+ * new semaphore can be referenced.
+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a binary semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, binary semaphores use a block
+ * of memory, in which the semaphore structure is stored.  If a binary semaphore
+ * is created using xSemaphoreCreateBinary() then the required memory is
+ * automatically dynamically allocated inside the xSemaphoreCreateBinary()
+ * function.  (see http://www.freertos.org/a00111.html).  If a binary semaphore
+ * is created using xSemaphoreCreateBinaryStatic() then the application writer
+ * must provide the memory.  xSemaphoreCreateBinaryStatic() therefore allows a
+ * binary semaphore to be created without using any dynamic memory allocation.
+ *
+ * The old vSemaphoreCreateBinary() macro is now deprecated in favour of this
+ * xSemaphoreCreateBinary() function.  Note that binary semaphores created using
+ * the vSemaphoreCreateBinary() macro are created in a state such that the
+ * first call to 'take' the semaphore would pass, whereas binary semaphores
+ * created using xSemaphoreCreateBinary() are created in a state such that the
+ * the semaphore must first be 'given' before it can be 'taken'.
+ *
+ * This type of semaphore can be used for pure synchronisation between tasks or
+ * between an interrupt and a task.  The semaphore need not be given back once
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while
+ * another continuously 'takes' the semaphore.  For this reason this type of
+ * semaphore does not use a priority inheritance mechanism.  For an alternative
+ * that does use priority inheritance see xSemaphoreCreateMutex().
+ *
+ * @return Handle to the created semaphore, or NULL if the memory required to
+ * hold the semaphore's data structures could not be allocated.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateBinary().
+    // This is a macro so pass the variable in directly.
+    xSemaphore = xSemaphoreCreateBinary();
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+ 

+ * \defgroup xSemaphoreCreateBinary xSemaphoreCreateBinary
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	#define xSemaphoreCreateBinary() xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE )
+#endif
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateBinaryStatic( StaticSemaphore_t *pxSemaphoreBuffer )

+ *
+ * Creates a new binary semaphore instance, and returns a handle by which the
+ * new semaphore can be referenced.
+ *
+ * NOTE: In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a binary semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, binary semaphores use a block
+ * of memory, in which the semaphore structure is stored.  If a binary semaphore
+ * is created using xSemaphoreCreateBinary() then the required memory is
+ * automatically dynamically allocated inside the xSemaphoreCreateBinary()
+ * function.  (see http://www.freertos.org/a00111.html).  If a binary semaphore
+ * is created using xSemaphoreCreateBinaryStatic() then the application writer
+ * must provide the memory.  xSemaphoreCreateBinaryStatic() therefore allows a
+ * binary semaphore to be created without using any dynamic memory allocation.
+ *
+ * This type of semaphore can be used for pure synchronisation between tasks or
+ * between an interrupt and a task.  The semaphore need not be given back once
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while
+ * another continuously 'takes' the semaphore.  For this reason this type of
+ * semaphore does not use a priority inheritance mechanism.  For an alternative
+ * that does use priority inheritance see xSemaphoreCreateMutex().
+ *
+ * @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will then be used to hold the semaphore's data structure, removing the
+ * need for the memory to be allocated dynamically.
+ *
+ * @return If the semaphore is created then a handle to the created semaphore is
+ * returned.  If pxSemaphoreBuffer is NULL then NULL is returned.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore = NULL;
+ StaticSemaphore_t xSemaphoreBuffer;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateBinary().
+    // The semaphore's data structures will be placed in the xSemaphoreBuffer
+    // variable, the address of which is passed into the function.  The
+    // function's parameter is not NULL, so the function will not attempt any
+    // dynamic memory allocation, and therefore the function will not return
+    // return NULL.
+    xSemaphore = xSemaphoreCreateBinary( &xSemaphoreBuffer );
+
+    // Rest of task code goes here.
+ }
+ 

+ * \defgroup xSemaphoreCreateBinaryStatic xSemaphoreCreateBinaryStatic
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	#define xSemaphoreCreateBinaryStatic( pxStaticSemaphore ) xQueueGenericCreateStatic( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, NULL, pxStaticSemaphore, queueQUEUE_TYPE_BINARY_SEMAPHORE )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * semphr. h
+ * 
xSemaphoreTake(
+ *                   SemaphoreHandle_t xSemaphore,
+ *                   TickType_t xBlockTime
+ *               )

+ *
+ * Macro to obtain a semaphore.  The semaphore must have previously been
+ * created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or
+ * xSemaphoreCreateCounting().
+ *
+ * @param xSemaphore A handle to the semaphore being taken - obtained when
+ * the semaphore was created.
+ *
+ * @param xBlockTime The time in ticks to wait for the semaphore to become
+ * available.  The macro portTICK_PERIOD_MS can be used to convert this to a
+ * real time.  A block time of zero can be used to poll the semaphore.  A block
+ * time of portMAX_DELAY can be used to block indefinitely (provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h).
+ *
+ * @return pdTRUE if the semaphore was obtained.  pdFALSE
+ * if xBlockTime expired without the semaphore becoming available.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // A task that creates a semaphore.
+ void vATask( void * pvParameters )
+ {
+    // Create the semaphore to guard a shared resource.
+    xSemaphore = xSemaphoreCreateBinary();
+ }
+
+ // A task that uses the semaphore.
+ void vAnotherTask( void * pvParameters )
+ {
+    // ... Do other things.
+
+    if( xSemaphore != NULL )
+    {
+        // See if we can obtain the semaphore.  If the semaphore is not available
+        // wait 10 ticks to see if it becomes free.
+        if( xSemaphoreTake( xSemaphore, ( TickType_t ) 10 ) == pdTRUE )
+        {
+            // We were able to obtain the semaphore and can now access the
+            // shared resource.
+
+            // ...
+
+            // We have finished accessing the shared resource.  Release the
+            // semaphore.
+            xSemaphoreGive( xSemaphore );
+        }
+        else
+        {
+            // We could not obtain the semaphore and can therefore not access
+            // the shared resource safely.
+        }
+    }
+ }
+ 

+ * \defgroup xSemaphoreTake xSemaphoreTake
+ * \ingroup Semaphores
+ */
+#define xSemaphoreTake( xSemaphore, xBlockTime )		xQueueSemaphoreTake( ( xSemaphore ), ( xBlockTime ) )
+
+/**
+ * semphr. h
+ * xSemaphoreTakeRecursive(
+ *                          SemaphoreHandle_t xMutex,
+ *                          TickType_t xBlockTime
+ *                        )
+ *
+ * Macro to recursively obtain, or 'take', a mutex type semaphore.
+ * The mutex must have previously been created using a call to
+ * xSemaphoreCreateRecursiveMutex();
+ *
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this
+ * macro to be available.
+ *
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request.  For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also  'given' the mutex back
+ * exactly five times.
+ *
+ * @param xMutex A handle to the mutex being obtained.  This is the
+ * handle returned by xSemaphoreCreateRecursiveMutex();
+ *
+ * @param xBlockTime The time in ticks to wait for the semaphore to become
+ * available.  The macro portTICK_PERIOD_MS can be used to convert this to a
+ * real time.  A block time of zero can be used to poll the semaphore.  If
+ * the task already owns the semaphore then xSemaphoreTakeRecursive() will
+ * return immediately no matter what the value of xBlockTime.
+ *
+ * @return pdTRUE if the semaphore was obtained.  pdFALSE if xBlockTime
+ * expired without the semaphore becoming available.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+    // Create the mutex to guard a shared resource.
+    xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+    // ... Do other things.
+
+    if( xMutex != NULL )
+    {
+        // See if we can obtain the mutex.  If the mutex is not available
+        // wait 10 ticks to see if it becomes free.
+        if( xSemaphoreTakeRecursive( xSemaphore, ( TickType_t ) 10 ) == pdTRUE )
+        {
+            // We were able to obtain the mutex and can now access the
+            // shared resource.
+
+            // ...
+            // For some reason due to the nature of the code further calls to
+            // xSemaphoreTakeRecursive() are made on the same mutex.  In real
+            // code these would not be just sequential calls as this would make
+            // no sense.  Instead the calls are likely to be buried inside
+            // a more complex call structure.
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+
+            // The mutex has now been 'taken' three times, so will not be
+            // available to another task until it has also been given back
+            // three times.  Again it is unlikely that real code would have
+            // these calls sequentially, but instead buried in a more complex
+            // call structure.  This is just for illustrative purposes.
+            xSemaphoreGiveRecursive( xMutex );
+            xSemaphoreGiveRecursive( xMutex );
+            xSemaphoreGiveRecursive( xMutex );
+
+            // Now the mutex can be taken by other tasks.
+        }
+        else
+        {
+            // We could not obtain the mutex and can therefore not access
+            // the shared resource safely.
+        }
+    }
+ }
+ 

+ * \defgroup xSemaphoreTakeRecursive xSemaphoreTakeRecursive
+ * \ingroup Semaphores
+ */
+#if( configUSE_RECURSIVE_MUTEXES == 1 )
+	#define xSemaphoreTakeRecursive( xMutex, xBlockTime )	xQueueTakeMutexRecursive( ( xMutex ), ( xBlockTime ) )
+#endif
+
+/**
+ * semphr. h
+ * 
xSemaphoreGive( SemaphoreHandle_t xSemaphore )

+ *
+ * Macro to release a semaphore.  The semaphore must have previously been
+ * created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or
+ * xSemaphoreCreateCounting(). and obtained using sSemaphoreTake().
+ *
+ * This macro must not be used from an ISR.  See xSemaphoreGiveFromISR () for
+ * an alternative which can be used from an ISR.
+ *
+ * This macro must also not be used on semaphores created using
+ * xSemaphoreCreateRecursiveMutex().
+ *
+ * @param xSemaphore A handle to the semaphore being released.  This is the
+ * handle returned when the semaphore was created.
+ *
+ * @return pdTRUE if the semaphore was released.  pdFALSE if an error occurred.
+ * Semaphores are implemented using queues.  An error can occur if there is
+ * no space on the queue to post a message - indicating that the
+ * semaphore was not first obtained correctly.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+    // Create the semaphore to guard a shared resource.
+    xSemaphore = vSemaphoreCreateBinary();
+
+    if( xSemaphore != NULL )
+    {
+        if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+        {
+            // We would expect this call to fail because we cannot give
+            // a semaphore without first "taking" it!
+        }
+
+        // Obtain the semaphore - don't block if the semaphore is not
+        // immediately available.
+        if( xSemaphoreTake( xSemaphore, ( TickType_t ) 0 ) )
+        {
+            // We now have the semaphore and can access the shared resource.
+
+            // ...
+
+            // We have finished accessing the shared resource so can free the
+            // semaphore.
+            if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+            {
+                // We would not expect this call to fail because we must have
+                // obtained the semaphore to get here.
+            }
+        }
+    }
+ }
+ 

+ * \defgroup xSemaphoreGive xSemaphoreGive
+ * \ingroup Semaphores
+ */
+#define xSemaphoreGive( xSemaphore )		xQueueGenericSend( ( QueueHandle_t ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )
+
+/**
+ * semphr. h
+ * 
xSemaphoreGiveRecursive( SemaphoreHandle_t xMutex )

+ *
+ * Macro to recursively release, or 'give', a mutex type semaphore.
+ * The mutex must have previously been created using a call to
+ * xSemaphoreCreateRecursiveMutex();
+ *
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this
+ * macro to be available.
+ *
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request.  For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also  'given' the mutex back
+ * exactly five times.
+ *
+ * @param xMutex A handle to the mutex being released, or 'given'.  This is the
+ * handle returned by xSemaphoreCreateMutex();
+ *
+ * @return pdTRUE if the semaphore was given.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+    // Create the mutex to guard a shared resource.
+    xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+    // ... Do other things.
+
+    if( xMutex != NULL )
+    {
+        // See if we can obtain the mutex.  If the mutex is not available
+        // wait 10 ticks to see if it becomes free.
+        if( xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ) == pdTRUE )
+        {
+            // We were able to obtain the mutex and can now access the
+            // shared resource.
+
+            // ...
+            // For some reason due to the nature of the code further calls to
+			// xSemaphoreTakeRecursive() are made on the same mutex.  In real
+			// code these would not be just sequential calls as this would make
+			// no sense.  Instead the calls are likely to be buried inside
+			// a more complex call structure.
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+
+            // The mutex has now been 'taken' three times, so will not be
+			// available to another task until it has also been given back
+			// three times.  Again it is unlikely that real code would have
+			// these calls sequentially, it would be more likely that the calls
+			// to xSemaphoreGiveRecursive() would be called as a call stack
+			// unwound.  This is just for demonstrative purposes.
+            xSemaphoreGiveRecursive( xMutex );
+			xSemaphoreGiveRecursive( xMutex );
+			xSemaphoreGiveRecursive( xMutex );
+
+			// Now the mutex can be taken by other tasks.
+        }
+        else
+        {
+            // We could not obtain the mutex and can therefore not access
+            // the shared resource safely.
+        }
+    }
+ }
+ 

+ * \defgroup xSemaphoreGiveRecursive xSemaphoreGiveRecursive
+ * \ingroup Semaphores
+ */
+#if( configUSE_RECURSIVE_MUTEXES == 1 )
+	#define xSemaphoreGiveRecursive( xMutex )	xQueueGiveMutexRecursive( ( xMutex ) )
+#endif
+
+/**
+ * semphr. h
+ * 
+ xSemaphoreGiveFromISR(
+                          SemaphoreHandle_t xSemaphore,
+                          BaseType_t *pxHigherPriorityTaskWoken
+                      )

+ *
+ * Macro to  release a semaphore.  The semaphore must have previously been
+ * created with a call to xSemaphoreCreateBinary() or xSemaphoreCreateCounting().
+ *
+ * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())
+ * must not be used with this macro.
+ *
+ * This macro can be used from an ISR.
+ *
+ * @param xSemaphore A handle to the semaphore being released.  This is the
+ * handle returned when the semaphore was created.
+ *
+ * @param pxHigherPriorityTaskWoken xSemaphoreGiveFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if giving the semaphore caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task.  If xSemaphoreGiveFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the semaphore was successfully given, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+ 
+ \#define LONG_TIME 0xffff
+ \#define TICKS_TO_WAIT	10
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // Repetitive task.
+ void vATask( void * pvParameters )
+ {
+    for( ;; )
+    {
+        // We want this task to run every 10 ticks of a timer.  The semaphore
+        // was created before this task was started.
+
+        // Block waiting for the semaphore to become available.
+        if( xSemaphoreTake( xSemaphore, LONG_TIME ) == pdTRUE )
+        {
+            // It is time to execute.
+
+            // ...
+
+            // We have finished our task.  Return to the top of the loop where
+            // we will block on the semaphore until it is time to execute
+            // again.  Note when using the semaphore for synchronisation with an
+			// ISR in this manner there is no need to 'give' the semaphore back.
+        }
+    }
+ }
+
+ // Timer ISR
+ void vTimerISR( void * pvParameters )
+ {
+ static uint8_t ucLocalTickCount = 0;
+ static BaseType_t xHigherPriorityTaskWoken;
+
+    // A timer tick has occurred.
+
+    // ... Do other time functions.
+
+    // Is it time for vATask () to run?
+	xHigherPriorityTaskWoken = pdFALSE;
+    ucLocalTickCount++;
+    if( ucLocalTickCount >= TICKS_TO_WAIT )
+    {
+        // Unblock the task by releasing the semaphore.
+        xSemaphoreGiveFromISR( xSemaphore, &xHigherPriorityTaskWoken );
+
+        // Reset the count so we release the semaphore again in 10 ticks time.
+        ucLocalTickCount = 0;
+    }
+
+    if( xHigherPriorityTaskWoken != pdFALSE )
+    {
+        // We can force a context switch here.  Context switching from an
+        // ISR uses port specific syntax.  Check the demo task for your port
+        // to find the syntax required.
+    }
+ }
+ 

+ * \defgroup xSemaphoreGiveFromISR xSemaphoreGiveFromISR
+ * \ingroup Semaphores
+ */
+#define xSemaphoreGiveFromISR( xSemaphore, pxHigherPriorityTaskWoken )	xQueueGiveFromISR( ( QueueHandle_t ) ( xSemaphore ), ( pxHigherPriorityTaskWoken ) )
+
+/**
+ * semphr. h
+ * 
+ xSemaphoreTakeFromISR(
+                          SemaphoreHandle_t xSemaphore,
+                          BaseType_t *pxHigherPriorityTaskWoken
+                      )

+ *
+ * Macro to  take a semaphore from an ISR.  The semaphore must have
+ * previously been created with a call to xSemaphoreCreateBinary() or
+ * xSemaphoreCreateCounting().
+ *
+ * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())
+ * must not be used with this macro.
+ *
+ * This macro can be used from an ISR, however taking a semaphore from an ISR
+ * is not a common operation.  It is likely to only be useful when taking a
+ * counting semaphore when an interrupt is obtaining an object from a resource
+ * pool (when the semaphore count indicates the number of resources available).
+ *
+ * @param xSemaphore A handle to the semaphore being taken.  This is the
+ * handle returned when the semaphore was created.
+ *
+ * @param pxHigherPriorityTaskWoken xSemaphoreTakeFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if taking the semaphore caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task.  If xSemaphoreTakeFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the semaphore was successfully taken, otherwise
+ * pdFALSE
+ */
+#define xSemaphoreTakeFromISR( xSemaphore, pxHigherPriorityTaskWoken )	xQueueReceiveFromISR( ( QueueHandle_t ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ) )
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateMutex( void )

+ *
+ * Creates a new mutex type semaphore instance, and returns a handle by which
+ * the new mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, mutex semaphores use a block
+ * of memory, in which the mutex structure is stored.  If a mutex is created
+ * using xSemaphoreCreateMutex() then the required memory is automatically
+ * dynamically allocated inside the xSemaphoreCreateMutex() function.  (see
+ * http://www.freertos.org/a00111.html).  If a mutex is created using
+ * xSemaphoreCreateMutexStatic() then the application writer must provided the
+ * memory.  xSemaphoreCreateMutexStatic() therefore allows a mutex to be created
+ * without using any dynamic memory allocation.
+ *
+ * Mutexes created using this function can be accessed using the xSemaphoreTake()
+ * and xSemaphoreGive() macros.  The xSemaphoreTakeRecursive() and
+ * xSemaphoreGiveRecursive() macros must not be used.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @return If the mutex was successfully created then a handle to the created
+ * semaphore is returned.  If there was not enough heap to allocate the mutex
+ * data structures then NULL is returned.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+    // This is a macro so pass the variable in directly.
+    xSemaphore = xSemaphoreCreateMutex();
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+ 

+ * \defgroup xSemaphoreCreateMutex xSemaphoreCreateMutex
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	#define xSemaphoreCreateMutex() xQueueCreateMutex( queueQUEUE_TYPE_MUTEX )
+#endif
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateMutexStatic( StaticSemaphore_t *pxMutexBuffer )

+ *
+ * Creates a new mutex type semaphore instance, and returns a handle by which
+ * the new mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, mutex semaphores use a block
+ * of memory, in which the mutex structure is stored.  If a mutex is created
+ * using xSemaphoreCreateMutex() then the required memory is automatically
+ * dynamically allocated inside the xSemaphoreCreateMutex() function.  (see
+ * http://www.freertos.org/a00111.html).  If a mutex is created using
+ * xSemaphoreCreateMutexStatic() then the application writer must provided the
+ * memory.  xSemaphoreCreateMutexStatic() therefore allows a mutex to be created
+ * without using any dynamic memory allocation.
+ *
+ * Mutexes created using this function can be accessed using the xSemaphoreTake()
+ * and xSemaphoreGive() macros.  The xSemaphoreTakeRecursive() and
+ * xSemaphoreGiveRecursive() macros must not be used.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will be used to hold the mutex's data structure, removing the need for
+ * the memory to be allocated dynamically.
+ *
+ * @return If the mutex was successfully created then a handle to the created
+ * mutex is returned.  If pxMutexBuffer was NULL then NULL is returned.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xMutexBuffer;
+
+ void vATask( void * pvParameters )
+ {
+    // A mutex cannot be used before it has been created.  xMutexBuffer is
+    // into xSemaphoreCreateMutexStatic() so no dynamic memory allocation is
+    // attempted.
+    xSemaphore = xSemaphoreCreateMutexStatic( &xMutexBuffer );
+
+    // As no dynamic memory allocation was performed, xSemaphore cannot be NULL,
+    // so there is no need to check it.
+ }
+ 

+ * \defgroup xSemaphoreCreateMutexStatic xSemaphoreCreateMutexStatic
+ * \ingroup Semaphores
+ */
+ #if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	#define xSemaphoreCreateMutexStatic( pxMutexBuffer ) xQueueCreateMutexStatic( queueQUEUE_TYPE_MUTEX, ( pxMutexBuffer ) )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateRecursiveMutex( void )

+ *
+ * Creates a new recursive mutex type semaphore instance, and returns a handle
+ * by which the new recursive mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, recursive mutexs use a block
+ * of memory, in which the mutex structure is stored.  If a recursive mutex is
+ * created using xSemaphoreCreateRecursiveMutex() then the required memory is
+ * automatically dynamically allocated inside the
+ * xSemaphoreCreateRecursiveMutex() function.  (see
+ * http://www.freertos.org/a00111.html).  If a recursive mutex is created using
+ * xSemaphoreCreateRecursiveMutexStatic() then the application writer must
+ * provide the memory that will get used by the mutex.
+ * xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to
+ * be created without using any dynamic memory allocation.
+ *
+ * Mutexes created using this macro can be accessed using the
+ * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros.  The
+ * xSemaphoreTake() and xSemaphoreGive() macros must not be used.
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request.  For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also  'given' the mutex back
+ * exactly five times.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @return xSemaphore Handle to the created mutex semaphore.  Should be of type
+ * SemaphoreHandle_t.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+    // This is a macro so pass the variable in directly.
+    xSemaphore = xSemaphoreCreateRecursiveMutex();
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+ 

+ * \defgroup xSemaphoreCreateRecursiveMutex xSemaphoreCreateRecursiveMutex
+ * \ingroup Semaphores
+ */
+#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) )
+	#define xSemaphoreCreateRecursiveMutex() xQueueCreateMutex( queueQUEUE_TYPE_RECURSIVE_MUTEX )
+#endif
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateRecursiveMutexStatic( StaticSemaphore_t *pxMutexBuffer )

+ *
+ * Creates a new recursive mutex type semaphore instance, and returns a handle
+ * by which the new recursive mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, recursive mutexs use a block
+ * of memory, in which the mutex structure is stored.  If a recursive mutex is
+ * created using xSemaphoreCreateRecursiveMutex() then the required memory is
+ * automatically dynamically allocated inside the
+ * xSemaphoreCreateRecursiveMutex() function.  (see
+ * http://www.freertos.org/a00111.html).  If a recursive mutex is created using
+ * xSemaphoreCreateRecursiveMutexStatic() then the application writer must
+ * provide the memory that will get used by the mutex.
+ * xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to
+ * be created without using any dynamic memory allocation.
+ *
+ * Mutexes created using this macro can be accessed using the
+ * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros.  The
+ * xSemaphoreTake() and xSemaphoreGive() macros must not be used.
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request.  For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also  'given' the mutex back
+ * exactly five times.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will then be used to hold the recursive mutex's data structure,
+ * removing the need for the memory to be allocated dynamically.
+ *
+ * @return If the recursive mutex was successfully created then a handle to the
+ * created recursive mutex is returned.  If pxMutexBuffer was NULL then NULL is
+ * returned.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xMutexBuffer;
+
+ void vATask( void * pvParameters )
+ {
+    // A recursive semaphore cannot be used before it is created.  Here a
+    // recursive mutex is created using xSemaphoreCreateRecursiveMutexStatic().
+    // The address of xMutexBuffer is passed into the function, and will hold
+    // the mutexes data structures - so no dynamic memory allocation will be
+    // attempted.
+    xSemaphore = xSemaphoreCreateRecursiveMutexStatic( &xMutexBuffer );
+
+    // As no dynamic memory allocation was performed, xSemaphore cannot be NULL,
+    // so there is no need to check it.
+ }
+ 

+ * \defgroup xSemaphoreCreateRecursiveMutexStatic xSemaphoreCreateRecursiveMutexStatic
+ * \ingroup Semaphores
+ */
+#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) )
+	#define xSemaphoreCreateRecursiveMutexStatic( pxStaticSemaphore ) xQueueCreateMutexStatic( queueQUEUE_TYPE_RECURSIVE_MUTEX, pxStaticSemaphore )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateCounting( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount )

+ *
+ * Creates a new counting semaphore instance, and returns a handle by which the
+ * new counting semaphore can be referenced.
+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a counting semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, counting semaphores use a
+ * block of memory, in which the counting semaphore structure is stored.  If a
+ * counting semaphore is created using xSemaphoreCreateCounting() then the
+ * required memory is automatically dynamically allocated inside the
+ * xSemaphoreCreateCounting() function.  (see
+ * http://www.freertos.org/a00111.html).  If a counting semaphore is created
+ * using xSemaphoreCreateCountingStatic() then the application writer can
+ * instead optionally provide the memory that will get used by the counting
+ * semaphore.  xSemaphoreCreateCountingStatic() therefore allows a counting
+ * semaphore to be created without using any dynamic memory allocation.
+ *
+ * Counting semaphores are typically used for two things:
+ *
+ * 1) Counting events.
+ *
+ *    In this usage scenario an event handler will 'give' a semaphore each time
+ *    an event occurs (incrementing the semaphore count value), and a handler
+ *    task will 'take' a semaphore each time it processes an event
+ *    (decrementing the semaphore count value).  The count value is therefore
+ *    the difference between the number of events that have occurred and the
+ *    number that have been processed.  In this case it is desirable for the
+ *    initial count value to be zero.
+ *
+ * 2) Resource management.
+ *
+ *    In this usage scenario the count value indicates the number of resources
+ *    available.  To obtain control of a resource a task must first obtain a
+ *    semaphore - decrementing the semaphore count value.  When the count value
+ *    reaches zero there are no free resources.  When a task finishes with the
+ *    resource it 'gives' the semaphore back - incrementing the semaphore count
+ *    value.  In this case it is desirable for the initial count value to be
+ *    equal to the maximum count value, indicating that all resources are free.
+ *
+ * @param uxMaxCount The maximum count value that can be reached.  When the
+ *        semaphore reaches this value it can no longer be 'given'.
+ *
+ * @param uxInitialCount The count value assigned to the semaphore when it is
+ *        created.
+ *
+ * @return Handle to the created semaphore.  Null if the semaphore could not be
+ *         created.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ SemaphoreHandle_t xSemaphore = NULL;
+
+    // Semaphore cannot be used before a call to xSemaphoreCreateCounting().
+    // The max value to which the semaphore can count should be 10, and the
+    // initial value assigned to the count should be 0.
+    xSemaphore = xSemaphoreCreateCounting( 10, 0 );
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+ 

+ * \defgroup xSemaphoreCreateCounting xSemaphoreCreateCounting
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	#define xSemaphoreCreateCounting( uxMaxCount, uxInitialCount ) xQueueCreateCountingSemaphore( ( uxMaxCount ), ( uxInitialCount ) )
+#endif
+
+/**
+ * semphr. h
+ * 
SemaphoreHandle_t xSemaphoreCreateCountingStatic( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount, StaticSemaphore_t *pxSemaphoreBuffer )

+ *
+ * Creates a new counting semaphore instance, and returns a handle by which the
+ * new counting semaphore can be referenced.
+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a counting semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, counting semaphores use a
+ * block of memory, in which the counting semaphore structure is stored.  If a
+ * counting semaphore is created using xSemaphoreCreateCounting() then the
+ * required memory is automatically dynamically allocated inside the
+ * xSemaphoreCreateCounting() function.  (see
+ * http://www.freertos.org/a00111.html).  If a counting semaphore is created
+ * using xSemaphoreCreateCountingStatic() then the application writer must
+ * provide the memory.  xSemaphoreCreateCountingStatic() therefore allows a
+ * counting semaphore to be created without using any dynamic memory allocation.
+ *
+ * Counting semaphores are typically used for two things:
+ *
+ * 1) Counting events.
+ *
+ *    In this usage scenario an event handler will 'give' a semaphore each time
+ *    an event occurs (incrementing the semaphore count value), and a handler
+ *    task will 'take' a semaphore each time it processes an event
+ *    (decrementing the semaphore count value).  The count value is therefore
+ *    the difference between the number of events that have occurred and the
+ *    number that have been processed.  In this case it is desirable for the
+ *    initial count value to be zero.
+ *
+ * 2) Resource management.
+ *
+ *    In this usage scenario the count value indicates the number of resources
+ *    available.  To obtain control of a resource a task must first obtain a
+ *    semaphore - decrementing the semaphore count value.  When the count value
+ *    reaches zero there are no free resources.  When a task finishes with the
+ *    resource it 'gives' the semaphore back - incrementing the semaphore count
+ *    value.  In this case it is desirable for the initial count value to be
+ *    equal to the maximum count value, indicating that all resources are free.
+ *
+ * @param uxMaxCount The maximum count value that can be reached.  When the
+ *        semaphore reaches this value it can no longer be 'given'.
+ *
+ * @param uxInitialCount The count value assigned to the semaphore when it is
+ *        created.
+ *
+ * @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will then be used to hold the semaphore's data structure, removing the
+ * need for the memory to be allocated dynamically.
+ *
+ * @return If the counting semaphore was successfully created then a handle to
+ * the created counting semaphore is returned.  If pxSemaphoreBuffer was NULL
+ * then NULL is returned.
+ *
+ * Example usage:
+ 
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xSemaphoreBuffer;
+
+ void vATask( void * pvParameters )
+ {
+ SemaphoreHandle_t xSemaphore = NULL;
+
+    // Counting semaphore cannot be used before they have been created.  Create
+    // a counting semaphore using xSemaphoreCreateCountingStatic().  The max
+    // value to which the semaphore can count is 10, and the initial value
+    // assigned to the count will be 0.  The address of xSemaphoreBuffer is
+    // passed in and will be used to hold the semaphore structure, so no dynamic
+    // memory allocation will be used.
+    xSemaphore = xSemaphoreCreateCounting( 10, 0, &xSemaphoreBuffer );
+
+    // No memory allocation was attempted so xSemaphore cannot be NULL, so there
+    // is no need to check its value.
+ }
+ 

+ * \defgroup xSemaphoreCreateCountingStatic xSemaphoreCreateCountingStatic
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	#define xSemaphoreCreateCountingStatic( uxMaxCount, uxInitialCount, pxSemaphoreBuffer ) xQueueCreateCountingSemaphoreStatic( ( uxMaxCount ), ( uxInitialCount ), ( pxSemaphoreBuffer ) )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * semphr. h
+ * 
void vSemaphoreDelete( SemaphoreHandle_t xSemaphore );

+ *
+ * Delete a semaphore.  This function must be used with care.  For example,
+ * do not delete a mutex type semaphore if the mutex is held by a task.
+ *
+ * @param xSemaphore A handle to the semaphore to be deleted.
+ *
+ * \defgroup vSemaphoreDelete vSemaphoreDelete
+ * \ingroup Semaphores
+ */
+#define vSemaphoreDelete( xSemaphore ) vQueueDelete( ( QueueHandle_t ) ( xSemaphore ) )
+
+/**
+ * semphr.h
+ * 
TaskHandle_t xSemaphoreGetMutexHolder( SemaphoreHandle_t xMutex );

+ *
+ * If xMutex is indeed a mutex type semaphore, return the current mutex holder.
+ * If xMutex is not a mutex type semaphore, or the mutex is available (not held
+ * by a task), return NULL.
+ *
+ * Note: This is a good way of determining if the calling task is the mutex
+ * holder, but not a good way of determining the identity of the mutex holder as
+ * the holder may change between the function exiting and the returned value
+ * being tested.
+ */
+#define xSemaphoreGetMutexHolder( xSemaphore ) xQueueGetMutexHolder( ( xSemaphore ) )
+
+/**
+ * semphr.h
+ * 
TaskHandle_t xSemaphoreGetMutexHolderFromISR( SemaphoreHandle_t xMutex );

+ *
+ * If xMutex is indeed a mutex type semaphore, return the current mutex holder.
+ * If xMutex is not a mutex type semaphore, or the mutex is available (not held
+ * by a task), return NULL.
+ *
+ */
+#define xSemaphoreGetMutexHolderFromISR( xSemaphore ) xQueueGetMutexHolderFromISR( ( xSemaphore ) )
+
+/**
+ * semphr.h
+ * 
UBaseType_t uxSemaphoreGetCount( SemaphoreHandle_t xSemaphore );

+ *
+ * If the semaphore is a counting semaphore then uxSemaphoreGetCount() returns
+ * its current count value.  If the semaphore is a binary semaphore then
+ * uxSemaphoreGetCount() returns 1 if the semaphore is available, and 0 if the
+ * semaphore is not available.
+ *
+ */
+#define uxSemaphoreGetCount( xSemaphore ) uxQueueMessagesWaiting( ( QueueHandle_t ) ( xSemaphore ) )
+
+#endif /* SEMAPHORE_H */
+
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h
new file mode 100644
index 0000000..c505574
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h
@@ -0,0 +1,129 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef STACK_MACROS_H
+#define STACK_MACROS_H
+
+/*
+ * Call the stack overflow hook function if the stack of the task being swapped
+ * out is currently overflowed, or looks like it might have overflowed in the
+ * past.
+ *
+ * Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check
+ * the current stack state only - comparing the current top of stack value to
+ * the stack limit.  Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1
+ * will also cause the last few stack bytes to be checked to ensure the value
+ * to which the bytes were set when the task was created have not been
+ * overwritten.  Note this second test does not guarantee that an overflowed
+ * stack will always be recognised.
+ */
+
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
+
+	/* Only the current stack state is to be checked. */
+	#define taskCHECK_FOR_STACK_OVERFLOW()																\
+	{																									\
+		/* Is the currently saved stack pointer within the stack limit? */								\
+		if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack )										\
+		{																								\
+			vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName );	\
+		}																								\
+	}
+
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) )
+
+	/* Only the current stack state is to be checked. */
+	#define taskCHECK_FOR_STACK_OVERFLOW()																\
+	{																									\
+																										\
+		/* Is the currently saved stack pointer within the stack limit? */								\
+		if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack )									\
+		{																								\
+			vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName );	\
+		}																								\
+	}
+
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
+
+	#define taskCHECK_FOR_STACK_OVERFLOW()																\
+	{																									\
+		const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack;							\
+		const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5;											\
+																										\
+		if( ( pulStack[ 0 ] != ulCheckValue ) ||														\
+			( pulStack[ 1 ] != ulCheckValue ) ||														\
+			( pulStack[ 2 ] != ulCheckValue ) ||														\
+			( pulStack[ 3 ] != ulCheckValue ) )															\
+		{																								\
+			vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName );	\
+		}																								\
+	}
+
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
+
+	#define taskCHECK_FOR_STACK_OVERFLOW()																								\
+	{																																	\
+	int8_t *pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack;																		\
+	static const uint8_t ucExpectedStackBytes[] = {	tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE,		\
+													tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE,		\
+													tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE,		\
+													tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE,		\
+													tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE };	\
+																																		\
+																																		\
+		pcEndOfStack -= sizeof( ucExpectedStackBytes );																					\
+																																		\
+		/* Has the extremity of the task stack ever been written over? */																\
+		if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 )					\
+		{																																\
+			vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName );									\
+		}																																\
+	}
+
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
+/*-----------------------------------------------------------*/
+
+/* Remove stack overflow macro if not being used. */
+#ifndef taskCHECK_FOR_STACK_OVERFLOW
+	#define taskCHECK_FOR_STACK_OVERFLOW()
+#endif
+
+
+
+#endif /* STACK_MACROS_H */
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stdint.readme b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stdint.readme
new file mode 100644
index 0000000..6d86149
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stdint.readme
@@ -0,0 +1,27 @@
+
+#ifndef FREERTOS_STDINT
+#define FREERTOS_STDINT
+
+/*******************************************************************************
+ * THIS IS NOT A FULL stdint.h IMPLEMENTATION - It only contains the definitions
+ * necessary to build the FreeRTOS code.  It is provided to allow FreeRTOS to be
+ * built using compilers that do not provide their own stdint.h definition.
+ *
+ * To use this file:
+ *
+ *    1) Copy this file into the directory that contains your FreeRTOSConfig.h
+ *       header file, as that directory will already be in the compilers include
+ *       path.
+ *
+ *    2) Rename the copied file stdint.h.
+ *
+ */
+
+typedef signed char int8_t;
+typedef unsigned char uint8_t;
+typedef short int16_t;
+typedef unsigned short uint16_t;
+typedef long int32_t;
+typedef unsigned long uint32_t;
+
+#endif /* FREERTOS_STDINT */
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h
new file mode 100644
index 0000000..3605703
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h
@@ -0,0 +1,859 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/*
+ * Stream buffers are used to send a continuous stream of data from one task or
+ * interrupt to another.  Their implementation is light weight, making them
+ * particularly suited for interrupt to task and core to core communication
+ * scenarios.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xStreamBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xStreamBufferReceive()) inside a critical section section and set the
+ * receive block time to 0.
+ *
+ */
+
+#ifndef STREAM_BUFFER_H
+#define STREAM_BUFFER_H
+
+#ifndef INC_FREERTOS_H
+	#error "include FreeRTOS.h must appear in source files before include stream_buffer.h"
+#endif
+
+#if defined( __cplusplus )
+extern "C" {
+#endif
+
+/**
+ * Type by which stream buffers are referenced.  For example, a call to
+ * xStreamBufferCreate() returns an StreamBufferHandle_t variable that can
+ * then be used as a parameter to xStreamBufferSend(), xStreamBufferReceive(),
+ * etc.
+ */
+struct StreamBufferDef_t;
+typedef struct StreamBufferDef_t * StreamBufferHandle_t;
+
+
+/**
+ * message_buffer.h
+ *
+
+StreamBufferHandle_t xStreamBufferCreate( size_t xBufferSizeBytes, size_t xTriggerLevelBytes );
+

+ *
+ * Creates a new stream buffer using dynamically allocated memory.  See
+ * xStreamBufferCreateStatic() for a version that uses statically allocated
+ * memory (memory that is allocated at compile time).
+ *
+ * configSUPPORT_DYNAMIC_ALLOCATION must be set to 1 or left undefined in
+ * FreeRTOSConfig.h for xStreamBufferCreate() to be available.
+ *
+ * @param xBufferSizeBytes The total number of bytes the stream buffer will be
+ * able to hold at any one time.
+ *
+ * @param xTriggerLevelBytes The number of bytes that must be in the stream
+ * buffer before a task that is blocked on the stream buffer to wait for data is
+ * moved out of the blocked state.  For example, if a task is blocked on a read
+ * of an empty stream buffer that has a trigger level of 1 then the task will be
+ * unblocked when a single byte is written to the buffer or the task's block
+ * time expires.  As another example, if a task is blocked on a read of an empty
+ * stream buffer that has a trigger level of 10 then the task will not be
+ * unblocked until the stream buffer contains at least 10 bytes or the task's
+ * block time expires.  If a reading task's block time expires before the
+ * trigger level is reached then the task will still receive however many bytes
+ * are actually available.  Setting a trigger level of 0 will result in a
+ * trigger level of 1 being used.  It is not valid to specify a trigger level
+ * that is greater than the buffer size.
+ *
+ * @return If NULL is returned, then the stream buffer cannot be created
+ * because there is insufficient heap memory available for FreeRTOS to allocate
+ * the stream buffer data structures and storage area.  A non-NULL value being
+ * returned indicates that the stream buffer has been created successfully -
+ * the returned value should be stored as the handle to the created stream
+ * buffer.
+ *
+ * Example use:
+
+
+void vAFunction( void )
+{
+StreamBufferHandle_t xStreamBuffer;
+const size_t xStreamBufferSizeBytes = 100, xTriggerLevel = 10;
+
+    // Create a stream buffer that can hold 100 bytes.  The memory used to hold
+    // both the stream buffer structure and the data in the stream buffer is
+    // allocated dynamically.
+    xStreamBuffer = xStreamBufferCreate( xStreamBufferSizeBytes, xTriggerLevel );
+
+    if( xStreamBuffer == NULL )
+    {
+        // There was not enough heap memory space available to create the
+        // stream buffer.
+    }
+    else
+    {
+        // The stream buffer was created successfully and can now be used.
+    }
+}
+

+ * \defgroup xStreamBufferCreate xStreamBufferCreate
+ * \ingroup StreamBufferManagement
+ */
+#define xStreamBufferCreate( xBufferSizeBytes, xTriggerLevelBytes ) xStreamBufferGenericCreate( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE )
+
+/**
+ * stream_buffer.h
+ *
+
+StreamBufferHandle_t xStreamBufferCreateStatic( size_t xBufferSizeBytes,
+                                                size_t xTriggerLevelBytes,
+                                                uint8_t *pucStreamBufferStorageArea,
+                                                StaticStreamBuffer_t *pxStaticStreamBuffer );
+

+ * Creates a new stream buffer using statically allocated memory.  See
+ * xStreamBufferCreate() for a version that uses dynamically allocated memory.
+ *
+ * configSUPPORT_STATIC_ALLOCATION must be set to 1 in FreeRTOSConfig.h for
+ * xStreamBufferCreateStatic() to be available.
+ *
+ * @param xBufferSizeBytes The size, in bytes, of the buffer pointed to by the
+ * pucStreamBufferStorageArea parameter.
+ *
+ * @param xTriggerLevelBytes The number of bytes that must be in the stream
+ * buffer before a task that is blocked on the stream buffer to wait for data is
+ * moved out of the blocked state.  For example, if a task is blocked on a read
+ * of an empty stream buffer that has a trigger level of 1 then the task will be
+ * unblocked when a single byte is written to the buffer or the task's block
+ * time expires.  As another example, if a task is blocked on a read of an empty
+ * stream buffer that has a trigger level of 10 then the task will not be
+ * unblocked until the stream buffer contains at least 10 bytes or the task's
+ * block time expires.  If a reading task's block time expires before the
+ * trigger level is reached then the task will still receive however many bytes
+ * are actually available.  Setting a trigger level of 0 will result in a
+ * trigger level of 1 being used.  It is not valid to specify a trigger level
+ * that is greater than the buffer size.
+ *
+ * @param pucStreamBufferStorageArea Must point to a uint8_t array that is at
+ * least xBufferSizeBytes + 1 big.  This is the array to which streams are
+ * copied when they are written to the stream buffer.
+ *
+ * @param pxStaticStreamBuffer Must point to a variable of type
+ * StaticStreamBuffer_t, which will be used to hold the stream buffer's data
+ * structure.
+ *
+ * @return If the stream buffer is created successfully then a handle to the
+ * created stream buffer is returned. If either pucStreamBufferStorageArea or
+ * pxStaticstreamBuffer are NULL then NULL is returned.
+ *
+ * Example use:
+
+
+// Used to dimension the array used to hold the streams.  The available space
+// will actually be one less than this, so 999.
+#define STORAGE_SIZE_BYTES 1000
+
+// Defines the memory that will actually hold the streams within the stream
+// buffer.
+static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
+
+// The variable used to hold the stream buffer structure.
+StaticStreamBuffer_t xStreamBufferStruct;
+
+void MyFunction( void )
+{
+StreamBufferHandle_t xStreamBuffer;
+const size_t xTriggerLevel = 1;
+
+    xStreamBuffer = xStreamBufferCreateStatic( sizeof( ucBufferStorage ),
+                                               xTriggerLevel,
+                                               ucBufferStorage,
+                                               &xStreamBufferStruct );
+
+    // As neither the pucStreamBufferStorageArea or pxStaticStreamBuffer
+    // parameters were NULL, xStreamBuffer will not be NULL, and can be used to
+    // reference the created stream buffer in other stream buffer API calls.
+
+    // Other code that uses the stream buffer can go here.
+}
+
+

+ * \defgroup xStreamBufferCreateStatic xStreamBufferCreateStatic
+ * \ingroup StreamBufferManagement
+ */
+#define xStreamBufferCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pucStreamBufferStorageArea, pxStaticStreamBuffer ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE, pucStreamBufferStorageArea, pxStaticStreamBuffer )
+
+/**
+ * stream_buffer.h
+ *
+
+size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
+                          const void *pvTxData,
+                          size_t xDataLengthBytes,
+                          TickType_t xTicksToWait );
+

+ *
+ * Sends bytes to a stream buffer.  The bytes are copied into the stream buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xStreamBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xStreamBufferReceive()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xStreamBufferSend() to write to a stream buffer from a task.  Use
+ * xStreamBufferSendFromISR() to write to a stream buffer from an interrupt
+ * service routine (ISR).
+ *
+ * @param xStreamBuffer The handle of the stream buffer to which a stream is
+ * being sent.
+ *
+ * @param pvTxData A pointer to the buffer that holds the bytes to be copied
+ * into the stream buffer.
+ *
+ * @param xDataLengthBytes   The maximum number of bytes to copy from pvTxData
+ * into the stream buffer.
+ *
+ * @param xTicksToWait The maximum amount of time the task should remain in the
+ * Blocked state to wait for enough space to become available in the stream
+ * buffer, should the stream buffer contain too little space to hold the
+ * another xDataLengthBytes bytes.  The block time is specified in tick periods,
+ * so the absolute time it represents is dependent on the tick frequency.  The
+ * macro pdMS_TO_TICKS() can be used to convert a time specified in milliseconds
+ * into a time specified in ticks.  Setting xTicksToWait to portMAX_DELAY will
+ * cause the task to wait indefinitely (without timing out), provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h.  If a task times out
+ * before it can write all xDataLengthBytes into the buffer it will still write
+ * as many bytes as possible.  A task does not use any CPU time when it is in
+ * the blocked state.
+ *
+ * @return The number of bytes written to the stream buffer.  If a task times
+ * out before it can write all xDataLengthBytes into the buffer it will still
+ * write as many bytes as possible.
+ *
+ * Example use:
+
+void vAFunction( StreamBufferHandle_t xStreamBuffer )
+{
+size_t xBytesSent;
+uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
+char *pcStringToSend = "String to send";
+const TickType_t x100ms = pdMS_TO_TICKS( 100 );
+
+    // Send an array to the stream buffer, blocking for a maximum of 100ms to
+    // wait for enough space to be available in the stream buffer.
+    xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
+
+    if( xBytesSent != sizeof( ucArrayToSend ) )
+    {
+        // The call to xStreamBufferSend() times out before there was enough
+        // space in the buffer for the data to be written, but it did
+        // successfully write xBytesSent bytes.
+    }
+
+    // Send the string to the stream buffer.  Return immediately if there is not
+    // enough space in the buffer.
+    xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
+
+    if( xBytesSent != strlen( pcStringToSend ) )
+    {
+        // The entire string could not be added to the stream buffer because
+        // there was not enough free space in the buffer, but xBytesSent bytes
+        // were sent.  Could try again to send the remaining bytes.
+    }
+}
+

+ * \defgroup xStreamBufferSend xStreamBufferSend
+ * \ingroup StreamBufferManagement
+ */
+size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
+						  const void *pvTxData,
+						  size_t xDataLengthBytes,
+						  TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
+                                 const void *pvTxData,
+                                 size_t xDataLengthBytes,
+                                 BaseType_t *pxHigherPriorityTaskWoken );
+

+ *
+ * Interrupt safe version of the API function that sends a stream of bytes to
+ * the stream buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xStreamBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xStreamBufferReceive()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xStreamBufferSend() to write to a stream buffer from a task.  Use
+ * xStreamBufferSendFromISR() to write to a stream buffer from an interrupt
+ * service routine (ISR).
+ *
+ * @param xStreamBuffer The handle of the stream buffer to which a stream is
+ * being sent.
+ *
+ * @param pvTxData A pointer to the data that is to be copied into the stream
+ * buffer.
+ *
+ * @param xDataLengthBytes The maximum number of bytes to copy from pvTxData
+ * into the stream buffer.
+ *
+ * @param pxHigherPriorityTaskWoken  It is possible that a stream buffer will
+ * have a task blocked on it waiting for data.  Calling
+ * xStreamBufferSendFromISR() can make data available, and so cause a task that
+ * was waiting for data to leave the Blocked state.  If calling
+ * xStreamBufferSendFromISR() causes a task to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently executing task (the
+ * task that was interrupted), then, internally, xStreamBufferSendFromISR()
+ * will set *pxHigherPriorityTaskWoken to pdTRUE.  If
+ * xStreamBufferSendFromISR() sets this value to pdTRUE, then normally a
+ * context switch should be performed before the interrupt is exited.  This will
+ * ensure that the interrupt returns directly to the highest priority Ready
+ * state task.  *pxHigherPriorityTaskWoken should be set to pdFALSE before it
+ * is passed into the function.  See the example code below for an example.
+ *
+ * @return The number of bytes actually written to the stream buffer, which will
+ * be less than xDataLengthBytes if the stream buffer didn't have enough free
+ * space for all the bytes to be written.
+ *
+ * Example use:
+
+// A stream buffer that has already been created.
+StreamBufferHandle_t xStreamBuffer;
+
+void vAnInterruptServiceRoutine( void )
+{
+size_t xBytesSent;
+char *pcStringToSend = "String to send";
+BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
+
+    // Attempt to send the string to the stream buffer.
+    xBytesSent = xStreamBufferSendFromISR( xStreamBuffer,
+                                           ( void * ) pcStringToSend,
+                                           strlen( pcStringToSend ),
+                                           &xHigherPriorityTaskWoken );
+
+    if( xBytesSent != strlen( pcStringToSend ) )
+    {
+        // There was not enough free space in the stream buffer for the entire
+        // string to be written, ut xBytesSent bytes were written.
+    }
+
+    // If xHigherPriorityTaskWoken was set to pdTRUE inside
+    // xStreamBufferSendFromISR() then a task that has a priority above the
+    // priority of the currently executing task was unblocked and a context
+    // switch should be performed to ensure the ISR returns to the unblocked
+    // task.  In most FreeRTOS ports this is done by simply passing
+    // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
+    // variables value, and perform the context switch if necessary.  Check the
+    // documentation for the port in use for port specific instructions.
+    taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+}
+

+ * \defgroup xStreamBufferSendFromISR xStreamBufferSendFromISR
+ * \ingroup StreamBufferManagement
+ */
+size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
+								 const void *pvTxData,
+								 size_t xDataLengthBytes,
+								 BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
+                             void *pvRxData,
+                             size_t xBufferLengthBytes,
+                             TickType_t xTicksToWait );
+

+ *
+ * Receives bytes from a stream buffer.
+ *
+ * ***NOTE***:  Uniquely among FreeRTOS objects, the stream buffer
+ * implementation (so also the message buffer implementation, as message buffers
+ * are built on top of stream buffers) assumes there is only one task or
+ * interrupt that will write to the buffer (the writer), and only one task or
+ * interrupt that will read from the buffer (the reader).  It is safe for the
+ * writer and reader to be different tasks or interrupts, but, unlike other
+ * FreeRTOS objects, it is not safe to have multiple different writers or
+ * multiple different readers.  If there are to be multiple different writers
+ * then the application writer must place each call to a writing API function
+ * (such as xStreamBufferSend()) inside a critical section and set the send
+ * block time to 0.  Likewise, if there are to be multiple different readers
+ * then the application writer must place each call to a reading API function
+ * (such as xStreamBufferReceive()) inside a critical section and set the receive
+ * block time to 0.
+ *
+ * Use xStreamBufferReceive() to read from a stream buffer from a task.  Use
+ * xStreamBufferReceiveFromISR() to read from a stream buffer from an
+ * interrupt service routine (ISR).
+ *
+ * @param xStreamBuffer The handle of the stream buffer from which bytes are to
+ * be received.
+ *
+ * @param pvRxData A pointer to the buffer into which the received bytes will be
+ * copied.
+ *
+ * @param xBufferLengthBytes The length of the buffer pointed to by the
+ * pvRxData parameter.  This sets the maximum number of bytes to receive in one
+ * call.  xStreamBufferReceive will return as many bytes as possible up to a
+ * maximum set by xBufferLengthBytes.
+ *
+ * @param xTicksToWait The maximum amount of time the task should remain in the
+ * Blocked state to wait for data to become available if the stream buffer is
+ * empty.  xStreamBufferReceive() will return immediately if xTicksToWait is
+ * zero.  The block time is specified in tick periods, so the absolute time it
+ * represents is dependent on the tick frequency.  The macro pdMS_TO_TICKS() can
+ * be used to convert a time specified in milliseconds into a time specified in
+ * ticks.  Setting xTicksToWait to portMAX_DELAY will cause the task to wait
+ * indefinitely (without timing out), provided INCLUDE_vTaskSuspend is set to 1
+ * in FreeRTOSConfig.h.  A task does not use any CPU time when it is in the
+ * Blocked state.
+ *
+ * @return The number of bytes actually read from the stream buffer, which will
+ * be less than xBufferLengthBytes if the call to xStreamBufferReceive() timed
+ * out before xBufferLengthBytes were available.
+ *
+ * Example use:
+
+void vAFunction( StreamBuffer_t xStreamBuffer )
+{
+uint8_t ucRxData[ 20 ];
+size_t xReceivedBytes;
+const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
+
+    // Receive up to another sizeof( ucRxData ) bytes from the stream buffer.
+    // Wait in the Blocked state (so not using any CPU processing time) for a
+    // maximum of 100ms for the full sizeof( ucRxData ) number of bytes to be
+    // available.
+    xReceivedBytes = xStreamBufferReceive( xStreamBuffer,
+                                           ( void * ) ucRxData,
+                                           sizeof( ucRxData ),
+                                           xBlockTime );
+
+    if( xReceivedBytes > 0 )
+    {
+        // A ucRxData contains another xRecievedBytes bytes of data, which can
+        // be processed here....
+    }
+}
+

+ * \defgroup xStreamBufferReceive xStreamBufferReceive
+ * \ingroup StreamBufferManagement
+ */
+size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
+							 void *pvRxData,
+							 size_t xBufferLengthBytes,
+							 TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
+                                    void *pvRxData,
+                                    size_t xBufferLengthBytes,
+                                    BaseType_t *pxHigherPriorityTaskWoken );
+

+ *
+ * An interrupt safe version of the API function that receives bytes from a
+ * stream buffer.
+ *
+ * Use xStreamBufferReceive() to read bytes from a stream buffer from a task.
+ * Use xStreamBufferReceiveFromISR() to read bytes from a stream buffer from an
+ * interrupt service routine (ISR).
+ *
+ * @param xStreamBuffer The handle of the stream buffer from which a stream
+ * is being received.
+ *
+ * @param pvRxData A pointer to the buffer into which the received bytes are
+ * copied.
+ *
+ * @param xBufferLengthBytes The length of the buffer pointed to by the
+ * pvRxData parameter.  This sets the maximum number of bytes to receive in one
+ * call.  xStreamBufferReceive will return as many bytes as possible up to a
+ * maximum set by xBufferLengthBytes.
+ *
+ * @param pxHigherPriorityTaskWoken  It is possible that a stream buffer will
+ * have a task blocked on it waiting for space to become available.  Calling
+ * xStreamBufferReceiveFromISR() can make space available, and so cause a task
+ * that is waiting for space to leave the Blocked state.  If calling
+ * xStreamBufferReceiveFromISR() causes a task to leave the Blocked state, and
+ * the unblocked task has a priority higher than the currently executing task
+ * (the task that was interrupted), then, internally,
+ * xStreamBufferReceiveFromISR() will set *pxHigherPriorityTaskWoken to pdTRUE.
+ * If xStreamBufferReceiveFromISR() sets this value to pdTRUE, then normally a
+ * context switch should be performed before the interrupt is exited.  That will
+ * ensure the interrupt returns directly to the highest priority Ready state
+ * task.  *pxHigherPriorityTaskWoken should be set to pdFALSE before it is
+ * passed into the function.  See the code example below for an example.
+ *
+ * @return The number of bytes read from the stream buffer, if any.
+ *
+ * Example use:
+
+// A stream buffer that has already been created.
+StreamBuffer_t xStreamBuffer;
+
+void vAnInterruptServiceRoutine( void )
+{
+uint8_t ucRxData[ 20 ];
+size_t xReceivedBytes;
+BaseType_t xHigherPriorityTaskWoken = pdFALSE;  // Initialised to pdFALSE.
+
+    // Receive the next stream from the stream buffer.
+    xReceivedBytes = xStreamBufferReceiveFromISR( xStreamBuffer,
+                                                  ( void * ) ucRxData,
+                                                  sizeof( ucRxData ),
+                                                  &xHigherPriorityTaskWoken );
+
+    if( xReceivedBytes > 0 )
+    {
+        // ucRxData contains xReceivedBytes read from the stream buffer.
+        // Process the stream here....
+    }
+
+    // If xHigherPriorityTaskWoken was set to pdTRUE inside
+    // xStreamBufferReceiveFromISR() then a task that has a priority above the
+    // priority of the currently executing task was unblocked and a context
+    // switch should be performed to ensure the ISR returns to the unblocked
+    // task.  In most FreeRTOS ports this is done by simply passing
+    // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
+    // variables value, and perform the context switch if necessary.  Check the
+    // documentation for the port in use for port specific instructions.
+    taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+}
+

+ * \defgroup xStreamBufferReceiveFromISR xStreamBufferReceiveFromISR
+ * \ingroup StreamBufferManagement
+ */
+size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
+									void *pvRxData,
+									size_t xBufferLengthBytes,
+									BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer );
+

+ *
+ * Deletes a stream buffer that was previously created using a call to
+ * xStreamBufferCreate() or xStreamBufferCreateStatic().  If the stream
+ * buffer was created using dynamic memory (that is, by xStreamBufferCreate()),
+ * then the allocated memory is freed.
+ *
+ * A stream buffer handle must not be used after the stream buffer has been
+ * deleted.
+ *
+ * @param xStreamBuffer The handle of the stream buffer to be deleted.
+ *
+ * \defgroup vStreamBufferDelete vStreamBufferDelete
+ * \ingroup StreamBufferManagement
+ */
+void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer );
+

+ *
+ * Queries a stream buffer to see if it is full.  A stream buffer is full if it
+ * does not have any free space, and therefore cannot accept any more data.
+ *
+ * @param xStreamBuffer The handle of the stream buffer being queried.
+ *
+ * @return If the stream buffer is full then pdTRUE is returned.  Otherwise
+ * pdFALSE is returned.
+ *
+ * \defgroup xStreamBufferIsFull xStreamBufferIsFull
+ * \ingroup StreamBufferManagement
+ */
+BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer );
+

+ *
+ * Queries a stream buffer to see if it is empty.  A stream buffer is empty if
+ * it does not contain any data.
+ *
+ * @param xStreamBuffer The handle of the stream buffer being queried.
+ *
+ * @return If the stream buffer is empty then pdTRUE is returned.  Otherwise
+ * pdFALSE is returned.
+ *
+ * \defgroup xStreamBufferIsEmpty xStreamBufferIsEmpty
+ * \ingroup StreamBufferManagement
+ */
+BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer );
+

+ *
+ * Resets a stream buffer to its initial, empty, state.  Any data that was in
+ * the stream buffer is discarded.  A stream buffer can only be reset if there
+ * are no tasks blocked waiting to either send to or receive from the stream
+ * buffer.
+ *
+ * @param xStreamBuffer The handle of the stream buffer being reset.
+ *
+ * @return If the stream buffer is reset then pdPASS is returned.  If there was
+ * a task blocked waiting to send to or read from the stream buffer then the
+ * stream buffer is not reset and pdFAIL is returned.
+ *
+ * \defgroup xStreamBufferReset xStreamBufferReset
+ * \ingroup StreamBufferManagement
+ */
+BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer );
+

+ *
+ * Queries a stream buffer to see how much free space it contains, which is
+ * equal to the amount of data that can be sent to the stream buffer before it
+ * is full.
+ *
+ * @param xStreamBuffer The handle of the stream buffer being queried.
+ *
+ * @return The number of bytes that can be written to the stream buffer before
+ * the stream buffer would be full.
+ *
+ * \defgroup xStreamBufferSpacesAvailable xStreamBufferSpacesAvailable
+ * \ingroup StreamBufferManagement
+ */
+size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer );
+

+ *
+ * Queries a stream buffer to see how much data it contains, which is equal to
+ * the number of bytes that can be read from the stream buffer before the stream
+ * buffer would be empty.
+ *
+ * @param xStreamBuffer The handle of the stream buffer being queried.
+ *
+ * @return The number of bytes that can be read from the stream buffer before
+ * the stream buffer would be empty.
+ *
+ * \defgroup xStreamBufferBytesAvailable xStreamBufferBytesAvailable
+ * \ingroup StreamBufferManagement
+ */
+size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel );
+

+ *
+ * A stream buffer's trigger level is the number of bytes that must be in the
+ * stream buffer before a task that is blocked on the stream buffer to
+ * wait for data is moved out of the blocked state.  For example, if a task is
+ * blocked on a read of an empty stream buffer that has a trigger level of 1
+ * then the task will be unblocked when a single byte is written to the buffer
+ * or the task's block time expires.  As another example, if a task is blocked
+ * on a read of an empty stream buffer that has a trigger level of 10 then the
+ * task will not be unblocked until the stream buffer contains at least 10 bytes
+ * or the task's block time expires.  If a reading task's block time expires
+ * before the trigger level is reached then the task will still receive however
+ * many bytes are actually available.  Setting a trigger level of 0 will result
+ * in a trigger level of 1 being used.  It is not valid to specify a trigger
+ * level that is greater than the buffer size.
+ *
+ * A trigger level is set when the stream buffer is created, and can be modified
+ * using xStreamBufferSetTriggerLevel().
+ *
+ * @param xStreamBuffer The handle of the stream buffer being updated.
+ *
+ * @param xTriggerLevel The new trigger level for the stream buffer.
+ *
+ * @return If xTriggerLevel was less than or equal to the stream buffer's length
+ * then the trigger level will be updated and pdTRUE is returned.  Otherwise
+ * pdFALSE is returned.
+ *
+ * \defgroup xStreamBufferSetTriggerLevel xStreamBufferSetTriggerLevel
+ * \ingroup StreamBufferManagement
+ */
+BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
+

+ *
+ * For advanced users only.
+ *
+ * The sbSEND_COMPLETED() macro is called from within the FreeRTOS APIs when
+ * data is sent to a message buffer or stream buffer.  If there was a task that
+ * was blocked on the message or stream buffer waiting for data to arrive then
+ * the sbSEND_COMPLETED() macro sends a notification to the task to remove it
+ * from the Blocked state.  xStreamBufferSendCompletedFromISR() does the same
+ * thing.  It is provided to enable application writers to implement their own
+ * version of sbSEND_COMPLETED(), and MUST NOT BE USED AT ANY OTHER TIME.
+ *
+ * See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
+ * additional information.
+ *
+ * @param xStreamBuffer The handle of the stream buffer to which data was
+ * written.
+ *
+ * @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
+ * initialised to pdFALSE before it is passed into
+ * xStreamBufferSendCompletedFromISR().  If calling
+ * xStreamBufferSendCompletedFromISR() removes a task from the Blocked state,
+ * and the task has a priority above the priority of the currently running task,
+ * then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
+ * context switch should be performed before exiting the ISR.
+ *
+ * @return If a task was removed from the Blocked state then pdTRUE is returned.
+ * Otherwise pdFALSE is returned.
+ *
+ * \defgroup xStreamBufferSendCompletedFromISR xStreamBufferSendCompletedFromISR
+ * \ingroup StreamBufferManagement
+ */
+BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * stream_buffer.h
+ *
+
+BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
+

+ *
+ * For advanced users only.
+ *
+ * The sbRECEIVE_COMPLETED() macro is called from within the FreeRTOS APIs when
+ * data is read out of a message buffer or stream buffer.  If there was a task
+ * that was blocked on the message or stream buffer waiting for data to arrive
+ * then the sbRECEIVE_COMPLETED() macro sends a notification to the task to
+ * remove it from the Blocked state.  xStreamBufferReceiveCompletedFromISR()
+ * does the same thing.  It is provided to enable application writers to
+ * implement their own version of sbRECEIVE_COMPLETED(), and MUST NOT BE USED AT
+ * ANY OTHER TIME.
+ *
+ * See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for
+ * additional information.
+ *
+ * @param xStreamBuffer The handle of the stream buffer from which data was
+ * read.
+ *
+ * @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be
+ * initialised to pdFALSE before it is passed into
+ * xStreamBufferReceiveCompletedFromISR().  If calling
+ * xStreamBufferReceiveCompletedFromISR() removes a task from the Blocked state,
+ * and the task has a priority above the priority of the currently running task,
+ * then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a
+ * context switch should be performed before exiting the ISR.
+ *
+ * @return If a task was removed from the Blocked state then pdTRUE is returned.
+ * Otherwise pdFALSE is returned.
+ *
+ * \defgroup xStreamBufferReceiveCompletedFromISR xStreamBufferReceiveCompletedFromISR
+ * \ingroup StreamBufferManagement
+ */
+BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/* Functions below here are not part of the public API. */
+StreamBufferHandle_t xStreamBufferGenericCreate( size_t xBufferSizeBytes,
+												 size_t xTriggerLevelBytes,
+												 BaseType_t xIsMessageBuffer ) PRIVILEGED_FUNCTION;
+
+StreamBufferHandle_t xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes,
+													   size_t xTriggerLevelBytes,
+													   BaseType_t xIsMessageBuffer,
+													   uint8_t * const pucStreamBufferStorageArea,
+													   StaticStreamBuffer_t * const pxStaticStreamBuffer ) PRIVILEGED_FUNCTION;
+
+size_t xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+
+#if( configUSE_TRACE_FACILITY == 1 )
+	void vStreamBufferSetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer, UBaseType_t uxStreamBufferNumber ) PRIVILEGED_FUNCTION;
+	UBaseType_t uxStreamBufferGetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+	uint8_t ucStreamBufferGetStreamBufferType( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
+#endif
+
+#if defined( __cplusplus )
+}
+#endif
+
+#endif	/* !defined( STREAM_BUFFER_H ) */
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/task.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/task.h
new file mode 100644
index 0000000..4b8639c
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/task.h
@@ -0,0 +1,2543 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef INC_TASK_H
+#define INC_TASK_H
+
+#ifndef INC_FREERTOS_H
+	#error "include FreeRTOS.h must appear in source files before include task.h"
+#endif
+
+#include "list.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * MACROS AND DEFINITIONS
+ *----------------------------------------------------------*/
+
+#define tskKERNEL_VERSION_NUMBER "V10.3.1"
+#define tskKERNEL_VERSION_MAJOR 10
+#define tskKERNEL_VERSION_MINOR 3
+#define tskKERNEL_VERSION_BUILD 1
+
+/* MPU region parameters passed in ulParameters
+ * of MemoryRegion_t struct. */
+#define tskMPU_REGION_READ_ONLY			( 1UL << 0UL )
+#define tskMPU_REGION_READ_WRITE		( 1UL << 1UL )
+#define tskMPU_REGION_EXECUTE_NEVER		( 1UL << 2UL )
+#define tskMPU_REGION_NORMAL_MEMORY		( 1UL << 3UL )
+#define tskMPU_REGION_DEVICE_MEMORY		( 1UL << 4UL )
+
+/**
+ * task. h
+ *
+ * Type by which tasks are referenced.  For example, a call to xTaskCreate
+ * returns (via a pointer parameter) an TaskHandle_t variable that can then
+ * be used as a parameter to vTaskDelete to delete the task.
+ *
+ * \defgroup TaskHandle_t TaskHandle_t
+ * \ingroup Tasks
+ */
+struct tskTaskControlBlock; /* The old naming convention is used to prevent breaking kernel aware debuggers. */
+typedef struct tskTaskControlBlock* TaskHandle_t;
+
+/*
+ * Defines the prototype to which the application task hook function must
+ * conform.
+ */
+typedef BaseType_t (*TaskHookFunction_t)( void * );
+
+/* Task states returned by eTaskGetState. */
+typedef enum
+{
+	eRunning = 0,	/* A task is querying the state of itself, so must be running. */
+	eReady,			/* The task being queried is in a read or pending ready list. */
+	eBlocked,		/* The task being queried is in the Blocked state. */
+	eSuspended,		/* The task being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */
+	eDeleted,		/* The task being queried has been deleted, but its TCB has not yet been freed. */
+	eInvalid		/* Used as an 'invalid state' value. */
+} eTaskState;
+
+/* Actions that can be performed when vTaskNotify() is called. */
+typedef enum
+{
+	eNoAction = 0,				/* Notify the task without updating its notify value. */
+	eSetBits,					/* Set bits in the task's notification value. */
+	eIncrement,					/* Increment the task's notification value. */
+	eSetValueWithOverwrite,		/* Set the task's notification value to a specific value even if the previous value has not yet been read by the task. */
+	eSetValueWithoutOverwrite	/* Set the task's notification value if the previous value has been read by the task. */
+} eNotifyAction;
+
+/*
+ * Used internally only.
+ */
+typedef struct xTIME_OUT
+{
+	BaseType_t xOverflowCount;
+	TickType_t xTimeOnEntering;
+} TimeOut_t;
+
+/*
+ * Defines the memory ranges allocated to the task when an MPU is used.
+ */
+typedef struct xMEMORY_REGION
+{
+	void *pvBaseAddress;
+	uint32_t ulLengthInBytes;
+	uint32_t ulParameters;
+} MemoryRegion_t;
+
+/*
+ * Parameters required to create an MPU protected task.
+ */
+typedef struct xTASK_PARAMETERS
+{
+	TaskFunction_t pvTaskCode;
+	const char * const pcName;	/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	configSTACK_DEPTH_TYPE usStackDepth;
+	void *pvParameters;
+	UBaseType_t uxPriority;
+	StackType_t *puxStackBuffer;
+	MemoryRegion_t xRegions[ portNUM_CONFIGURABLE_REGIONS ];
+	#if ( ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+		StaticTask_t * const pxTaskBuffer;
+	#endif
+} TaskParameters_t;
+
+/* Used with the uxTaskGetSystemState() function to return the state of each task
+in the system. */
+typedef struct xTASK_STATUS
+{
+	TaskHandle_t xHandle;			/* The handle of the task to which the rest of the information in the structure relates. */
+	const char *pcTaskName;			/* A pointer to the task's name.  This value will be invalid if the task was deleted since the structure was populated! */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	UBaseType_t xTaskNumber;		/* A number unique to the task. */
+	eTaskState eCurrentState;		/* The state in which the task existed when the structure was populated. */
+	UBaseType_t uxCurrentPriority;	/* The priority at which the task was running (may be inherited) when the structure was populated. */
+	UBaseType_t uxBasePriority;		/* The priority to which the task will return if the task's current priority has been inherited to avoid unbounded priority inversion when obtaining a mutex.  Only valid if configUSE_MUTEXES is defined as 1 in FreeRTOSConfig.h. */
+	uint32_t ulRunTimeCounter;		/* The total run time allocated to the task so far, as defined by the run time stats clock.  See http://www.freertos.org/rtos-run-time-stats.html.  Only valid when configGENERATE_RUN_TIME_STATS is defined as 1 in FreeRTOSConfig.h. */
+	StackType_t *pxStackBase;		/* Points to the lowest address of the task's stack area. */
+	configSTACK_DEPTH_TYPE usStackHighWaterMark;	/* The minimum amount of stack space that has remained for the task since the task was created.  The closer this value is to zero the closer the task has come to overflowing its stack. */
+} TaskStatus_t;
+
+/* Possible return values for eTaskConfirmSleepModeStatus(). */
+typedef enum
+{
+	eAbortSleep = 0,		/* A task has been made ready or a context switch pended since portSUPPORESS_TICKS_AND_SLEEP() was called - abort entering a sleep mode. */
+	eStandardSleep,			/* Enter a sleep mode that will not last any longer than the expected idle time. */
+	eNoTasksWaitingTimeout	/* No tasks are waiting for a timeout so it is safe to enter a sleep mode that can only be exited by an external interrupt. */
+} eSleepModeStatus;
+
+/**
+ * Defines the priority used by the idle task.  This must not be modified.
+ *
+ * \ingroup TaskUtils
+ */
+#define tskIDLE_PRIORITY			( ( UBaseType_t ) 0U )
+
+/**
+ * task. h
+ *
+ * Macro for forcing a context switch.
+ *
+ * \defgroup taskYIELD taskYIELD
+ * \ingroup SchedulerControl
+ */
+#define taskYIELD()					portYIELD()
+
+/**
+ * task. h
+ *
+ * Macro to mark the start of a critical code region.  Preemptive context
+ * switches cannot occur when in a critical region.
+ *
+ * NOTE: This may alter the stack (depending on the portable implementation)
+ * so must be used with care!
+ *
+ * \defgroup taskENTER_CRITICAL taskENTER_CRITICAL
+ * \ingroup SchedulerControl
+ */
+#define taskENTER_CRITICAL()		portENTER_CRITICAL()
+#define taskENTER_CRITICAL_FROM_ISR() portSET_INTERRUPT_MASK_FROM_ISR()
+
+/**
+ * task. h
+ *
+ * Macro to mark the end of a critical code region.  Preemptive context
+ * switches cannot occur when in a critical region.
+ *
+ * NOTE: This may alter the stack (depending on the portable implementation)
+ * so must be used with care!
+ *
+ * \defgroup taskEXIT_CRITICAL taskEXIT_CRITICAL
+ * \ingroup SchedulerControl
+ */
+#define taskEXIT_CRITICAL()			portEXIT_CRITICAL()
+#define taskEXIT_CRITICAL_FROM_ISR( x ) portCLEAR_INTERRUPT_MASK_FROM_ISR( x )
+/**
+ * task. h
+ *
+ * Macro to disable all maskable interrupts.
+ *
+ * \defgroup taskDISABLE_INTERRUPTS taskDISABLE_INTERRUPTS
+ * \ingroup SchedulerControl
+ */
+#define taskDISABLE_INTERRUPTS()	portDISABLE_INTERRUPTS()
+
+/**
+ * task. h
+ *
+ * Macro to enable microcontroller interrupts.
+ *
+ * \defgroup taskENABLE_INTERRUPTS taskENABLE_INTERRUPTS
+ * \ingroup SchedulerControl
+ */
+#define taskENABLE_INTERRUPTS()		portENABLE_INTERRUPTS()
+
+/* Definitions returned by xTaskGetSchedulerState().  taskSCHEDULER_SUSPENDED is
+0 to generate more optimal code when configASSERT() is defined as the constant
+is used in assert() statements. */
+#define taskSCHEDULER_SUSPENDED		( ( BaseType_t ) 0 )
+#define taskSCHEDULER_NOT_STARTED	( ( BaseType_t ) 1 )
+#define taskSCHEDULER_RUNNING		( ( BaseType_t ) 2 )
+
+
+/*-----------------------------------------------------------
+ * TASK CREATION API
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ *
+ BaseType_t xTaskCreate(
+							  TaskFunction_t pvTaskCode,
+							  const char * const pcName,
+							  configSTACK_DEPTH_TYPE usStackDepth,
+							  void *pvParameters,
+							  UBaseType_t uxPriority,
+							  TaskHandle_t *pvCreatedTask
+						  );

+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ *
+ * Internally, within the FreeRTOS implementation, tasks use two blocks of
+ * memory.  The first block is used to hold the task's data structures.  The
+ * second block is used by the task as its stack.  If a task is created using
+ * xTaskCreate() then both blocks of memory are automatically dynamically
+ * allocated inside the xTaskCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a task is created using
+ * xTaskCreateStatic() then the application writer must provide the required
+ * memory.  xTaskCreateStatic() therefore allows a task to be created without
+ * using any dynamic memory allocation.
+ *
+ * See xTaskCreateStatic() for a version that does not use any dynamic memory
+ * allocation.
+ *
+ * xTaskCreate() can only be used to create a task that has unrestricted
+ * access to the entire microcontroller memory map.  Systems that include MPU
+ * support can alternatively create an MPU constrained task using
+ * xTaskCreateRestricted().
+ *
+ * @param pvTaskCode Pointer to the task entry function.  Tasks
+ * must be implemented to never return (i.e. continuous loop).
+ *
+ * @param pcName A descriptive name for the task.  This is mainly used to
+ * facilitate debugging.  Max length defined by configMAX_TASK_NAME_LEN - default
+ * is 16.
+ *
+ * @param usStackDepth The size of the task stack specified as the number of
+ * variables the stack can hold - not the number of bytes.  For example, if
+ * the stack is 16 bits wide and usStackDepth is defined as 100, 200 bytes
+ * will be allocated for stack storage.
+ *
+ * @param pvParameters Pointer that will be used as the parameter for the task
+ * being created.
+ *
+ * @param uxPriority The priority at which the task should run.  Systems that
+ * include MPU support can optionally create tasks in a privileged (system)
+ * mode by setting bit portPRIVILEGE_BIT of the priority parameter.  For
+ * example, to create a privileged task at priority 2 the uxPriority parameter
+ * should be set to ( 2 | portPRIVILEGE_BIT ).
+ *
+ * @param pvCreatedTask Used to pass back a handle by which the created task
+ * can be referenced.
+ *
+ * @return pdPASS if the task was successfully created and added to a ready
+ * list, otherwise an error code defined in the file projdefs.h
+ *
+ * Example usage:
+   
+ // Task to be created.
+ void vTaskCode( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+	 }
+ }
+
+ // Function that creates a task.
+ void vOtherFunction( void )
+ {
+ static uint8_t ucParameterToPass;
+ TaskHandle_t xHandle = NULL;
+
+	 // Create the task, storing the handle.  Note that the passed parameter ucParameterToPass
+	 // must exist for the lifetime of the task, so in this case is declared static.  If it was just an
+	 // an automatic stack variable it might no longer exist, or at least have been corrupted, by the time
+	 // the new task attempts to access it.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, &ucParameterToPass, tskIDLE_PRIORITY, &xHandle );
+	 configASSERT( xHandle );
+
+	 // Use the handle to delete the task.
+	 if( xHandle != NULL )
+	 {
+	 	vTaskDelete( xHandle );
+	 }
+ }
+   

+ * \defgroup xTaskCreate xTaskCreate
+ * \ingroup Tasks
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	BaseType_t xTaskCreate(	TaskFunction_t pxTaskCode,
+							const char * const pcName,	/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+							const configSTACK_DEPTH_TYPE usStackDepth,
+							void * const pvParameters,
+							UBaseType_t uxPriority,
+							TaskHandle_t * const pxCreatedTask ) PRIVILEGED_FUNCTION;
+#endif
+
+/**
+ * task. h
+ *
+ TaskHandle_t xTaskCreateStatic( TaskFunction_t pvTaskCode,
+								 const char * const pcName,
+								 uint32_t ulStackDepth,
+								 void *pvParameters,
+								 UBaseType_t uxPriority,
+								 StackType_t *pxStackBuffer,
+								 StaticTask_t *pxTaskBuffer );

+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ *
+ * Internally, within the FreeRTOS implementation, tasks use two blocks of
+ * memory.  The first block is used to hold the task's data structures.  The
+ * second block is used by the task as its stack.  If a task is created using
+ * xTaskCreate() then both blocks of memory are automatically dynamically
+ * allocated inside the xTaskCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a task is created using
+ * xTaskCreateStatic() then the application writer must provide the required
+ * memory.  xTaskCreateStatic() therefore allows a task to be created without
+ * using any dynamic memory allocation.
+ *
+ * @param pvTaskCode Pointer to the task entry function.  Tasks
+ * must be implemented to never return (i.e. continuous loop).
+ *
+ * @param pcName A descriptive name for the task.  This is mainly used to
+ * facilitate debugging.  The maximum length of the string is defined by
+ * configMAX_TASK_NAME_LEN in FreeRTOSConfig.h.
+ *
+ * @param ulStackDepth The size of the task stack specified as the number of
+ * variables the stack can hold - not the number of bytes.  For example, if
+ * the stack is 32-bits wide and ulStackDepth is defined as 100 then 400 bytes
+ * will be allocated for stack storage.
+ *
+ * @param pvParameters Pointer that will be used as the parameter for the task
+ * being created.
+ *
+ * @param uxPriority The priority at which the task will run.
+ *
+ * @param pxStackBuffer Must point to a StackType_t array that has at least
+ * ulStackDepth indexes - the array will then be used as the task's stack,
+ * removing the need for the stack to be allocated dynamically.
+ *
+ * @param pxTaskBuffer Must point to a variable of type StaticTask_t, which will
+ * then be used to hold the task's data structures, removing the need for the
+ * memory to be allocated dynamically.
+ *
+ * @return If neither pxStackBuffer or pxTaskBuffer are NULL, then the task will
+ * be created and a handle to the created task is returned.  If either
+ * pxStackBuffer or pxTaskBuffer are NULL then the task will not be created and
+ * NULL is returned.
+ *
+ * Example usage:
+   
+
+    // Dimensions the buffer that the task being created will use as its stack.
+    // NOTE:  This is the number of words the stack will hold, not the number of
+    // bytes.  For example, if each stack item is 32-bits, and this is set to 100,
+    // then 400 bytes (100 * 32-bits) will be allocated.
+    #define STACK_SIZE 200
+
+    // Structure that will hold the TCB of the task being created.
+    StaticTask_t xTaskBuffer;
+
+    // Buffer that the task being created will use as its stack.  Note this is
+    // an array of StackType_t variables.  The size of StackType_t is dependent on
+    // the RTOS port.
+    StackType_t xStack[ STACK_SIZE ];
+
+    // Function that implements the task being created.
+    void vTaskCode( void * pvParameters )
+    {
+        // The parameter value is expected to be 1 as 1 is passed in the
+        // pvParameters value in the call to xTaskCreateStatic().
+        configASSERT( ( uint32_t ) pvParameters == 1UL );
+
+        for( ;; )
+        {
+            // Task code goes here.
+        }
+    }
+
+    // Function that creates a task.
+    void vOtherFunction( void )
+    {
+        TaskHandle_t xHandle = NULL;
+
+        // Create the task without using any dynamic memory allocation.
+        xHandle = xTaskCreateStatic(
+                      vTaskCode,       // Function that implements the task.
+                      "NAME",          // Text name for the task.
+                      STACK_SIZE,      // Stack size in words, not bytes.
+                      ( void * ) 1,    // Parameter passed into the task.
+                      tskIDLE_PRIORITY,// Priority at which the task is created.
+                      xStack,          // Array to use as the task's stack.
+                      &xTaskBuffer );  // Variable to hold the task's data structure.
+
+        // puxStackBuffer and pxTaskBuffer were not NULL, so the task will have
+        // been created, and xHandle will be the task's handle.  Use the handle
+        // to suspend the task.
+        vTaskSuspend( xHandle );
+    }
+   

+ * \defgroup xTaskCreateStatic xTaskCreateStatic
+ * \ingroup Tasks
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	TaskHandle_t xTaskCreateStatic(	TaskFunction_t pxTaskCode,
+									const char * const pcName, /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+									const uint32_t ulStackDepth,
+									void * const pvParameters,
+									UBaseType_t uxPriority,
+									StackType_t * const puxStackBuffer,
+									StaticTask_t * const pxTaskBuffer ) PRIVILEGED_FUNCTION;
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * task. h
+ *
+ BaseType_t xTaskCreateRestricted( TaskParameters_t *pxTaskDefinition, TaskHandle_t *pxCreatedTask );

+ *
+ * Only available when configSUPPORT_DYNAMIC_ALLOCATION is set to 1.
+ *
+ * xTaskCreateRestricted() should only be used in systems that include an MPU
+ * implementation.
+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ * The function parameters define the memory regions and associated access
+ * permissions allocated to the task.
+ *
+ * See xTaskCreateRestrictedStatic() for a version that does not use any
+ * dynamic memory allocation.
+ *
+ * @param pxTaskDefinition Pointer to a structure that contains a member
+ * for each of the normal xTaskCreate() parameters (see the xTaskCreate() API
+ * documentation) plus an optional stack buffer and the memory region
+ * definitions.
+ *
+ * @param pxCreatedTask Used to pass back a handle by which the created task
+ * can be referenced.
+ *
+ * @return pdPASS if the task was successfully created and added to a ready
+ * list, otherwise an error code defined in the file projdefs.h
+ *
+ * Example usage:
+   
+// Create an TaskParameters_t structure that defines the task to be created.
+static const TaskParameters_t xCheckTaskParameters =
+{
+	vATask,		// pvTaskCode - the function that implements the task.
+	"ATask",	// pcName - just a text name for the task to assist debugging.
+	100,		// usStackDepth	- the stack size DEFINED IN WORDS.
+	NULL,		// pvParameters - passed into the task function as the function parameters.
+	( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.
+	cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.
+
+	// xRegions - Allocate up to three separate memory regions for access by
+	// the task, with appropriate access permissions.  Different processors have
+	// different memory alignment requirements - refer to the FreeRTOS documentation
+	// for full information.
+	{
+		// Base address					Length	Parameters
+		{ cReadWriteArray,				32,		portMPU_REGION_READ_WRITE },
+		{ cReadOnlyArray,				32,		portMPU_REGION_READ_ONLY },
+		{ cPrivilegedOnlyAccessArray,	128,	portMPU_REGION_PRIVILEGED_READ_WRITE }
+	}
+};
+
+int main( void )
+{
+TaskHandle_t xHandle;
+
+	// Create a task from the const structure defined above.  The task handle
+	// is requested (the second parameter is not NULL) but in this case just for
+	// demonstration purposes as its not actually used.
+	xTaskCreateRestricted( &xRegTest1Parameters, &xHandle );
+
+	// Start the scheduler.
+	vTaskStartScheduler();
+
+	// Will only get here if there was insufficient memory to create the idle
+	// and/or timer task.
+	for( ;; );
+}
+   

+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted
+ * \ingroup Tasks
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+	BaseType_t xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask ) PRIVILEGED_FUNCTION;
+#endif
+
+/**
+ * task. h
+ *
+ BaseType_t xTaskCreateRestrictedStatic( TaskParameters_t *pxTaskDefinition, TaskHandle_t *pxCreatedTask );

+ *
+ * Only available when configSUPPORT_STATIC_ALLOCATION is set to 1.
+ *
+ * xTaskCreateRestrictedStatic() should only be used in systems that include an
+ * MPU implementation.
+ *
+ * Internally, within the FreeRTOS implementation, tasks use two blocks of
+ * memory.  The first block is used to hold the task's data structures.  The
+ * second block is used by the task as its stack.  If a task is created using
+ * xTaskCreateRestricted() then the stack is provided by the application writer,
+ * and the memory used to hold the task's data structure is automatically
+ * dynamically allocated inside the xTaskCreateRestricted() function.  If a task
+ * is created using xTaskCreateRestrictedStatic() then the application writer
+ * must provide the memory used to hold the task's data structures too.
+ * xTaskCreateRestrictedStatic() therefore allows a memory protected task to be
+ * created without using any dynamic memory allocation.
+ *
+ * @param pxTaskDefinition Pointer to a structure that contains a member
+ * for each of the normal xTaskCreate() parameters (see the xTaskCreate() API
+ * documentation) plus an optional stack buffer and the memory region
+ * definitions.  If configSUPPORT_STATIC_ALLOCATION is set to 1 the structure
+ * contains an additional member, which is used to point to a variable of type
+ * StaticTask_t - which is then used to hold the task's data structure.
+ *
+ * @param pxCreatedTask Used to pass back a handle by which the created task
+ * can be referenced.
+ *
+ * @return pdPASS if the task was successfully created and added to a ready
+ * list, otherwise an error code defined in the file projdefs.h
+ *
+ * Example usage:
+   
+// Create an TaskParameters_t structure that defines the task to be created.
+// The StaticTask_t variable is only included in the structure when
+// configSUPPORT_STATIC_ALLOCATION is set to 1.  The PRIVILEGED_DATA macro can
+// be used to force the variable into the RTOS kernel's privileged data area.
+static PRIVILEGED_DATA StaticTask_t xTaskBuffer;
+static const TaskParameters_t xCheckTaskParameters =
+{
+	vATask,		// pvTaskCode - the function that implements the task.
+	"ATask",	// pcName - just a text name for the task to assist debugging.
+	100,		// usStackDepth	- the stack size DEFINED IN WORDS.
+	NULL,		// pvParameters - passed into the task function as the function parameters.
+	( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.
+	cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.
+
+	// xRegions - Allocate up to three separate memory regions for access by
+	// the task, with appropriate access permissions.  Different processors have
+	// different memory alignment requirements - refer to the FreeRTOS documentation
+	// for full information.
+	{
+		// Base address					Length	Parameters
+		{ cReadWriteArray,				32,		portMPU_REGION_READ_WRITE },
+		{ cReadOnlyArray,				32,		portMPU_REGION_READ_ONLY },
+		{ cPrivilegedOnlyAccessArray,	128,	portMPU_REGION_PRIVILEGED_READ_WRITE }
+	}
+
+	&xTaskBuffer; // Holds the task's data structure.
+};
+
+int main( void )
+{
+TaskHandle_t xHandle;
+
+	// Create a task from the const structure defined above.  The task handle
+	// is requested (the second parameter is not NULL) but in this case just for
+	// demonstration purposes as its not actually used.
+	xTaskCreateRestricted( &xRegTest1Parameters, &xHandle );
+
+	// Start the scheduler.
+	vTaskStartScheduler();
+
+	// Will only get here if there was insufficient memory to create the idle
+	// and/or timer task.
+	for( ;; );
+}
+   

+ * \defgroup xTaskCreateRestrictedStatic xTaskCreateRestrictedStatic
+ * \ingroup Tasks
+ */
+#if( ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+	BaseType_t xTaskCreateRestrictedStatic( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask ) PRIVILEGED_FUNCTION;
+#endif
+
+/**
+ * task. h
+ *
+ void vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions );

+ *
+ * Memory regions are assigned to a restricted task when the task is created by
+ * a call to xTaskCreateRestricted().  These regions can be redefined using
+ * vTaskAllocateMPURegions().
+ *
+ * @param xTask The handle of the task being updated.
+ *
+ * @param xRegions A pointer to an MemoryRegion_t structure that contains the
+ * new memory region definitions.
+ *
+ * Example usage:
+   
+// Define an array of MemoryRegion_t structures that configures an MPU region
+// allowing read/write access for 1024 bytes starting at the beginning of the
+// ucOneKByte array.  The other two of the maximum 3 definable regions are
+// unused so set to zero.
+static const MemoryRegion_t xAltRegions[ portNUM_CONFIGURABLE_REGIONS ] =
+{
+	// Base address		Length		Parameters
+	{ ucOneKByte,		1024,		portMPU_REGION_READ_WRITE },
+	{ 0,				0,			0 },
+	{ 0,				0,			0 }
+};
+
+void vATask( void *pvParameters )
+{
+	// This task was created such that it has access to certain regions of
+	// memory as defined by the MPU configuration.  At some point it is
+	// desired that these MPU regions are replaced with that defined in the
+	// xAltRegions const struct above.  Use a call to vTaskAllocateMPURegions()
+	// for this purpose.  NULL is used as the task handle to indicate that this
+	// function should modify the MPU regions of the calling task.
+	vTaskAllocateMPURegions( NULL, xAltRegions );
+
+	// Now the task can continue its function, but from this point on can only
+	// access its stack and the ucOneKByte array (unless any other statically
+	// defined or shared regions have been declared elsewhere).
+}
+   

+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted
+ * \ingroup Tasks
+ */
+void vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskDelete( TaskHandle_t xTask );

+ *
+ * INCLUDE_vTaskDelete must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Remove a task from the RTOS real time kernel's management.  The task being
+ * deleted will be removed from all ready, blocked, suspended and event lists.
+ *
+ * NOTE:  The idle task is responsible for freeing the kernel allocated
+ * memory from tasks that have been deleted.  It is therefore important that
+ * the idle task is not starved of microcontroller processing time if your
+ * application makes any calls to vTaskDelete ().  Memory allocated by the
+ * task code is not automatically freed, and should be freed before the task
+ * is deleted.
+ *
+ * See the demo application file death.c for sample code that utilises
+ * vTaskDelete ().
+ *
+ * @param xTask The handle of the task to be deleted.  Passing NULL will
+ * cause the calling task to be deleted.
+ *
+ * Example usage:
+   
+ void vOtherFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create the task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // Use the handle to delete the task.
+	 vTaskDelete( xHandle );
+ }
+   

+ * \defgroup vTaskDelete vTaskDelete
+ * \ingroup Tasks
+ */
+void vTaskDelete( TaskHandle_t xTaskToDelete ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * TASK CONTROL API
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * 
void vTaskDelay( const TickType_t xTicksToDelay );

+ *
+ * Delay a task for a given number of ticks.  The actual time that the
+ * task remains blocked depends on the tick rate.  The constant
+ * portTICK_PERIOD_MS can be used to calculate real time from the tick
+ * rate - with the resolution of one tick period.
+ *
+ * INCLUDE_vTaskDelay must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ *
+ * vTaskDelay() specifies a time at which the task wishes to unblock relative to
+ * the time at which vTaskDelay() is called.  For example, specifying a block
+ * period of 100 ticks will cause the task to unblock 100 ticks after
+ * vTaskDelay() is called.  vTaskDelay() does not therefore provide a good method
+ * of controlling the frequency of a periodic task as the path taken through the
+ * code, as well as other task and interrupt activity, will effect the frequency
+ * at which vTaskDelay() gets called and therefore the time at which the task
+ * next executes.  See vTaskDelayUntil() for an alternative API function designed
+ * to facilitate fixed frequency execution.  It does this by specifying an
+ * absolute time (rather than a relative time) at which the calling task should
+ * unblock.
+ *
+ * @param xTicksToDelay The amount of time, in tick periods, that
+ * the calling task should block.
+ *
+ * Example usage:
+
+ void vTaskFunction( void * pvParameters )
+ {
+ // Block for 500ms.
+ const TickType_t xDelay = 500 / portTICK_PERIOD_MS;
+
+	 for( ;; )
+	 {
+		 // Simply toggle the LED every 500ms, blocking between each toggle.
+		 vToggleLED();
+		 vTaskDelay( xDelay );
+	 }
+ }
+
+ * \defgroup vTaskDelay vTaskDelay
+ * \ingroup TaskCtrl
+ */
+void vTaskDelay( const TickType_t xTicksToDelay ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskDelayUntil( TickType_t *pxPreviousWakeTime, const TickType_t xTimeIncrement );

+ *
+ * INCLUDE_vTaskDelayUntil must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Delay a task until a specified time.  This function can be used by periodic
+ * tasks to ensure a constant execution frequency.
+ *
+ * This function differs from vTaskDelay () in one important aspect:  vTaskDelay () will
+ * cause a task to block for the specified number of ticks from the time vTaskDelay () is
+ * called.  It is therefore difficult to use vTaskDelay () by itself to generate a fixed
+ * execution frequency as the time between a task starting to execute and that task
+ * calling vTaskDelay () may not be fixed [the task may take a different path though the
+ * code between calls, or may get interrupted or preempted a different number of times
+ * each time it executes].
+ *
+ * Whereas vTaskDelay () specifies a wake time relative to the time at which the function
+ * is called, vTaskDelayUntil () specifies the absolute (exact) time at which it wishes to
+ * unblock.
+ *
+ * The constant portTICK_PERIOD_MS can be used to calculate real time from the tick
+ * rate - with the resolution of one tick period.
+ *
+ * @param pxPreviousWakeTime Pointer to a variable that holds the time at which the
+ * task was last unblocked.  The variable must be initialised with the current time
+ * prior to its first use (see the example below).  Following this the variable is
+ * automatically updated within vTaskDelayUntil ().
+ *
+ * @param xTimeIncrement The cycle time period.  The task will be unblocked at
+ * time *pxPreviousWakeTime + xTimeIncrement.  Calling vTaskDelayUntil with the
+ * same xTimeIncrement parameter value will cause the task to execute with
+ * a fixed interface period.
+ *
+ * Example usage:
+   
+ // Perform an action every 10 ticks.
+ void vTaskFunction( void * pvParameters )
+ {
+ TickType_t xLastWakeTime;
+ const TickType_t xFrequency = 10;
+
+	 // Initialise the xLastWakeTime variable with the current time.
+	 xLastWakeTime = xTaskGetTickCount ();
+	 for( ;; )
+	 {
+		 // Wait for the next cycle.
+		 vTaskDelayUntil( &xLastWakeTime, xFrequency );
+
+		 // Perform action here.
+	 }
+ }
+   

+ * \defgroup vTaskDelayUntil vTaskDelayUntil
+ * \ingroup TaskCtrl
+ */
+void vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
BaseType_t xTaskAbortDelay( TaskHandle_t xTask );

+ *
+ * INCLUDE_xTaskAbortDelay must be defined as 1 in FreeRTOSConfig.h for this
+ * function to be available.
+ *
+ * A task will enter the Blocked state when it is waiting for an event.  The
+ * event it is waiting for can be a temporal event (waiting for a time), such
+ * as when vTaskDelay() is called, or an event on an object, such as when
+ * xQueueReceive() or ulTaskNotifyTake() is called.  If the handle of a task
+ * that is in the Blocked state is used in a call to xTaskAbortDelay() then the
+ * task will leave the Blocked state, and return from whichever function call
+ * placed the task into the Blocked state.
+ *
+ * There is no 'FromISR' version of this function as an interrupt would need to
+ * know which object a task was blocked on in order to know which actions to
+ * take.  For example, if the task was blocked on a queue the interrupt handler
+ * would then need to know if the queue was locked.
+ *
+ * @param xTask The handle of the task to remove from the Blocked state.
+ *
+ * @return If the task referenced by xTask was not in the Blocked state then
+ * pdFAIL is returned.  Otherwise pdPASS is returned.
+ *
+ * \defgroup xTaskAbortDelay xTaskAbortDelay
+ * \ingroup TaskCtrl
+ */
+BaseType_t xTaskAbortDelay( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
UBaseType_t uxTaskPriorityGet( const TaskHandle_t xTask );

+ *
+ * INCLUDE_uxTaskPriorityGet must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Obtain the priority of any task.
+ *
+ * @param xTask Handle of the task to be queried.  Passing a NULL
+ * handle results in the priority of the calling task being returned.
+ *
+ * @return The priority of xTask.
+ *
+ * Example usage:
+   
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to obtain the priority of the created task.
+	 // It was created with tskIDLE_PRIORITY, but may have changed
+	 // it itself.
+	 if( uxTaskPriorityGet( xHandle ) != tskIDLE_PRIORITY )
+	 {
+		 // The task has changed it's priority.
+	 }
+
+	 // ...
+
+	 // Is our priority higher than the created task?
+	 if( uxTaskPriorityGet( xHandle ) < uxTaskPriorityGet( NULL ) )
+	 {
+		 // Our priority (obtained using NULL handle) is higher.
+	 }
+ }
+   

+ * \defgroup uxTaskPriorityGet uxTaskPriorityGet
+ * \ingroup TaskCtrl
+ */
+UBaseType_t uxTaskPriorityGet( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
UBaseType_t uxTaskPriorityGetFromISR( const TaskHandle_t xTask );

+ *
+ * A version of uxTaskPriorityGet() that can be used from an ISR.
+ */
+UBaseType_t uxTaskPriorityGetFromISR( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
eTaskState eTaskGetState( TaskHandle_t xTask );

+ *
+ * INCLUDE_eTaskGetState must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Obtain the state of any task.  States are encoded by the eTaskState
+ * enumerated type.
+ *
+ * @param xTask Handle of the task to be queried.
+ *
+ * @return The state of xTask at the time the function was called.  Note the
+ * state of the task might change between the function being called, and the
+ * functions return value being tested by the calling task.
+ */
+eTaskState eTaskGetState( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState );

+ *
+ * configUSE_TRACE_FACILITY must be defined as 1 for this function to be
+ * available.  See the configuration section for more information.
+ *
+ * Populates a TaskStatus_t structure with information about a task.
+ *
+ * @param xTask Handle of the task being queried.  If xTask is NULL then
+ * information will be returned about the calling task.
+ *
+ * @param pxTaskStatus A pointer to the TaskStatus_t structure that will be
+ * filled with information about the task referenced by the handle passed using
+ * the xTask parameter.
+ *
+ * @xGetFreeStackSpace The TaskStatus_t structure contains a member to report
+ * the stack high water mark of the task being queried.  Calculating the stack
+ * high water mark takes a relatively long time, and can make the system
+ * temporarily unresponsive - so the xGetFreeStackSpace parameter is provided to
+ * allow the high water mark checking to be skipped.  The high watermark value
+ * will only be written to the TaskStatus_t structure if xGetFreeStackSpace is
+ * not set to pdFALSE;
+ *
+ * @param eState The TaskStatus_t structure contains a member to report the
+ * state of the task being queried.  Obtaining the task state is not as fast as
+ * a simple assignment - so the eState parameter is provided to allow the state
+ * information to be omitted from the TaskStatus_t structure.  To obtain state
+ * information then set eState to eInvalid - otherwise the value passed in
+ * eState will be reported as the task state in the TaskStatus_t structure.
+ *
+ * Example usage:
+   
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+ TaskStatus_t xTaskDetails;
+
+    // Obtain the handle of a task from its name.
+    xHandle = xTaskGetHandle( "Task_Name" );
+
+    // Check the handle is not NULL.
+    configASSERT( xHandle );
+
+    // Use the handle to obtain further information about the task.
+    vTaskGetInfo( xHandle,
+                  &xTaskDetails,
+                  pdTRUE, // Include the high water mark in xTaskDetails.
+                  eInvalid ); // Include the task state in xTaskDetails.
+ }
+   

+ * \defgroup vTaskGetInfo vTaskGetInfo
+ * \ingroup TaskCtrl
+ */
+void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority );

+ *
+ * INCLUDE_vTaskPrioritySet must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Set the priority of any task.
+ *
+ * A context switch will occur before the function returns if the priority
+ * being set is higher than the currently executing task.
+ *
+ * @param xTask Handle to the task for which the priority is being set.
+ * Passing a NULL handle results in the priority of the calling task being set.
+ *
+ * @param uxNewPriority The priority to which the task will be set.
+ *
+ * Example usage:
+   
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to raise the priority of the created task.
+	 vTaskPrioritySet( xHandle, tskIDLE_PRIORITY + 1 );
+
+	 // ...
+
+	 // Use a NULL handle to raise our priority to the same value.
+	 vTaskPrioritySet( NULL, tskIDLE_PRIORITY + 1 );
+ }
+   

+ * \defgroup vTaskPrioritySet vTaskPrioritySet
+ * \ingroup TaskCtrl
+ */
+void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskSuspend( TaskHandle_t xTaskToSuspend );

+ *
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Suspend any task.  When suspended a task will never get any microcontroller
+ * processing time, no matter what its priority.
+ *
+ * Calls to vTaskSuspend are not accumulative -
+ * i.e. calling vTaskSuspend () twice on the same task still only requires one
+ * call to vTaskResume () to ready the suspended task.
+ *
+ * @param xTaskToSuspend Handle to the task being suspended.  Passing a NULL
+ * handle will cause the calling task to be suspended.
+ *
+ * Example usage:
+   
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to suspend the created task.
+	 vTaskSuspend( xHandle );
+
+	 // ...
+
+	 // The created task will not run during this period, unless
+	 // another task calls vTaskResume( xHandle ).
+
+	 //...
+
+
+	 // Suspend ourselves.
+	 vTaskSuspend( NULL );
+
+	 // We cannot get here unless another task calls vTaskResume
+	 // with our handle as the parameter.
+ }
+   

+ * \defgroup vTaskSuspend vTaskSuspend
+ * \ingroup TaskCtrl
+ */
+void vTaskSuspend( TaskHandle_t xTaskToSuspend ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskResume( TaskHandle_t xTaskToResume );

+ *
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Resumes a suspended task.
+ *
+ * A task that has been suspended by one or more calls to vTaskSuspend ()
+ * will be made available for running again by a single call to
+ * vTaskResume ().
+ *
+ * @param xTaskToResume Handle to the task being readied.
+ *
+ * Example usage:
+   
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to suspend the created task.
+	 vTaskSuspend( xHandle );
+
+	 // ...
+
+	 // The created task will not run during this period, unless
+	 // another task calls vTaskResume( xHandle ).
+
+	 //...
+
+
+	 // Resume the suspended task ourselves.
+	 vTaskResume( xHandle );
+
+	 // The created task will once again get microcontroller processing
+	 // time in accordance with its priority within the system.
+ }
+   

+ * \defgroup vTaskResume vTaskResume
+ * \ingroup TaskCtrl
+ */
+void vTaskResume( TaskHandle_t xTaskToResume ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void xTaskResumeFromISR( TaskHandle_t xTaskToResume );

+ *
+ * INCLUDE_xTaskResumeFromISR must be defined as 1 for this function to be
+ * available.  See the configuration section for more information.
+ *
+ * An implementation of vTaskResume() that can be called from within an ISR.
+ *
+ * A task that has been suspended by one or more calls to vTaskSuspend ()
+ * will be made available for running again by a single call to
+ * xTaskResumeFromISR ().
+ *
+ * xTaskResumeFromISR() should not be used to synchronise a task with an
+ * interrupt if there is a chance that the interrupt could arrive prior to the
+ * task being suspended - as this can lead to interrupts being missed. Use of a
+ * semaphore as a synchronisation mechanism would avoid this eventuality.
+ *
+ * @param xTaskToResume Handle to the task being readied.
+ *
+ * @return pdTRUE if resuming the task should result in a context switch,
+ * otherwise pdFALSE. This is used by the ISR to determine if a context switch
+ * may be required following the ISR.
+ *
+ * \defgroup vTaskResumeFromISR vTaskResumeFromISR
+ * \ingroup TaskCtrl
+ */
+BaseType_t xTaskResumeFromISR( TaskHandle_t xTaskToResume ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * SCHEDULER CONTROL
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * 
void vTaskStartScheduler( void );

+ *
+ * Starts the real time kernel tick processing.  After calling the kernel
+ * has control over which tasks are executed and when.
+ *
+ * See the demo application file main.c for an example of creating
+ * tasks and starting the kernel.
+ *
+ * Example usage:
+   
+ void vAFunction( void )
+ {
+	 // Create at least one task before starting the kernel.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+	 // Start the real time kernel with preemption.
+	 vTaskStartScheduler ();
+
+	 // Will not get here unless a task calls vTaskEndScheduler ()
+ }
+   

+ *
+ * \defgroup vTaskStartScheduler vTaskStartScheduler
+ * \ingroup SchedulerControl
+ */
+void vTaskStartScheduler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskEndScheduler( void );

+ *
+ * NOTE:  At the time of writing only the x86 real mode port, which runs on a PC
+ * in place of DOS, implements this function.
+ *
+ * Stops the real time kernel tick.  All created tasks will be automatically
+ * deleted and multitasking (either preemptive or cooperative) will
+ * stop.  Execution then resumes from the point where vTaskStartScheduler ()
+ * was called, as if vTaskStartScheduler () had just returned.
+ *
+ * See the demo application file main. c in the demo/PC directory for an
+ * example that uses vTaskEndScheduler ().
+ *
+ * vTaskEndScheduler () requires an exit function to be defined within the
+ * portable layer (see vPortEndScheduler () in port. c for the PC port).  This
+ * performs hardware specific operations such as stopping the kernel tick.
+ *
+ * vTaskEndScheduler () will cause all of the resources allocated by the
+ * kernel to be freed - but will not free resources allocated by application
+ * tasks.
+ *
+ * Example usage:
+   
+ void vTaskCode( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+
+		 // At some point we want to end the real time kernel processing
+		 // so call ...
+		 vTaskEndScheduler ();
+	 }
+ }
+
+ void vAFunction( void )
+ {
+	 // Create at least one task before starting the kernel.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+	 // Start the real time kernel with preemption.
+	 vTaskStartScheduler ();
+
+	 // Will only get here when the vTaskCode () task has called
+	 // vTaskEndScheduler ().  When we get here we are back to single task
+	 // execution.
+ }
+   

+ *
+ * \defgroup vTaskEndScheduler vTaskEndScheduler
+ * \ingroup SchedulerControl
+ */
+void vTaskEndScheduler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskSuspendAll( void );

+ *
+ * Suspends the scheduler without disabling interrupts.  Context switches will
+ * not occur while the scheduler is suspended.
+ *
+ * After calling vTaskSuspendAll () the calling task will continue to execute
+ * without risk of being swapped out until a call to xTaskResumeAll () has been
+ * made.
+ *
+ * API functions that have the potential to cause a context switch (for example,
+ * vTaskDelayUntil(), xQueueSend(), etc.) must not be called while the scheduler
+ * is suspended.
+ *
+ * Example usage:
+   
+ void vTask1( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+
+		 // ...
+
+		 // At some point the task wants to perform a long operation during
+		 // which it does not want to get swapped out.  It cannot use
+		 // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+		 // operation may cause interrupts to be missed - including the
+		 // ticks.
+
+		 // Prevent the real time kernel swapping out the task.
+		 vTaskSuspendAll ();
+
+		 // Perform the operation here.  There is no need to use critical
+		 // sections as we have all the microcontroller processing time.
+		 // During this time interrupts will still operate and the kernel
+		 // tick count will be maintained.
+
+		 // ...
+
+		 // The operation is complete.  Restart the kernel.
+		 xTaskResumeAll ();
+	 }
+ }
+   

+ * \defgroup vTaskSuspendAll vTaskSuspendAll
+ * \ingroup SchedulerControl
+ */
+void vTaskSuspendAll( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
BaseType_t xTaskResumeAll( void );

+ *
+ * Resumes scheduler activity after it was suspended by a call to
+ * vTaskSuspendAll().
+ *
+ * xTaskResumeAll() only resumes the scheduler.  It does not unsuspend tasks
+ * that were previously suspended by a call to vTaskSuspend().
+ *
+ * @return If resuming the scheduler caused a context switch then pdTRUE is
+ *		  returned, otherwise pdFALSE is returned.
+ *
+ * Example usage:
+   
+ void vTask1( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+
+		 // ...
+
+		 // At some point the task wants to perform a long operation during
+		 // which it does not want to get swapped out.  It cannot use
+		 // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+		 // operation may cause interrupts to be missed - including the
+		 // ticks.
+
+		 // Prevent the real time kernel swapping out the task.
+		 vTaskSuspendAll ();
+
+		 // Perform the operation here.  There is no need to use critical
+		 // sections as we have all the microcontroller processing time.
+		 // During this time interrupts will still operate and the real
+		 // time kernel tick count will be maintained.
+
+		 // ...
+
+		 // The operation is complete.  Restart the kernel.  We want to force
+		 // a context switch - but there is no point if resuming the scheduler
+		 // caused a context switch already.
+		 if( !xTaskResumeAll () )
+		 {
+			  taskYIELD ();
+		 }
+	 }
+ }
+   

+ * \defgroup xTaskResumeAll xTaskResumeAll
+ * \ingroup SchedulerControl
+ */
+BaseType_t xTaskResumeAll( void ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * TASK UTILITIES
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * 
TickType_t xTaskGetTickCount( void );

+ *
+ * @return The count of ticks since vTaskStartScheduler was called.
+ *
+ * \defgroup xTaskGetTickCount xTaskGetTickCount
+ * \ingroup TaskUtils
+ */
+TickType_t xTaskGetTickCount( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
TickType_t xTaskGetTickCountFromISR( void );

+ *
+ * @return The count of ticks since vTaskStartScheduler was called.
+ *
+ * This is a version of xTaskGetTickCount() that is safe to be called from an
+ * ISR - provided that TickType_t is the natural word size of the
+ * microcontroller being used or interrupt nesting is either not supported or
+ * not being used.
+ *
+ * \defgroup xTaskGetTickCountFromISR xTaskGetTickCountFromISR
+ * \ingroup TaskUtils
+ */
+TickType_t xTaskGetTickCountFromISR( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
uint16_t uxTaskGetNumberOfTasks( void );

+ *
+ * @return The number of tasks that the real time kernel is currently managing.
+ * This includes all ready, blocked and suspended tasks.  A task that
+ * has been deleted but not yet freed by the idle task will also be
+ * included in the count.
+ *
+ * \defgroup uxTaskGetNumberOfTasks uxTaskGetNumberOfTasks
+ * \ingroup TaskUtils
+ */
+UBaseType_t uxTaskGetNumberOfTasks( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
char *pcTaskGetName( TaskHandle_t xTaskToQuery );

+ *
+ * @return The text (human readable) name of the task referenced by the handle
+ * xTaskToQuery.  A task can query its own name by either passing in its own
+ * handle, or by setting xTaskToQuery to NULL.
+ *
+ * \defgroup pcTaskGetName pcTaskGetName
+ * \ingroup TaskUtils
+ */
+char *pcTaskGetName( TaskHandle_t xTaskToQuery ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * task. h
+ * 
TaskHandle_t xTaskGetHandle( const char *pcNameToQuery );

+ *
+ * NOTE:  This function takes a relatively long time to complete and should be
+ * used sparingly.
+ *
+ * @return The handle of the task that has the human readable name pcNameToQuery.
+ * NULL is returned if no matching name is found.  INCLUDE_xTaskGetHandle
+ * must be set to 1 in FreeRTOSConfig.h for pcTaskGetHandle() to be available.
+ *
+ * \defgroup pcTaskGetHandle pcTaskGetHandle
+ * \ingroup TaskUtils
+ */
+TaskHandle_t xTaskGetHandle( const char *pcNameToQuery ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * task.h
+ * 
UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask );

+ *
+ * INCLUDE_uxTaskGetStackHighWaterMark must be set to 1 in FreeRTOSConfig.h for
+ * this function to be available.
+ *
+ * Returns the high water mark of the stack associated with xTask.  That is,
+ * the minimum free stack space there has been (in words, so on a 32 bit machine
+ * a value of 1 means 4 bytes) since the task started.  The smaller the returned
+ * number the closer the task has come to overflowing its stack.
+ *
+ * uxTaskGetStackHighWaterMark() and uxTaskGetStackHighWaterMark2() are the
+ * same except for their return type.  Using configSTACK_DEPTH_TYPE allows the
+ * user to determine the return type.  It gets around the problem of the value
+ * overflowing on 8-bit types without breaking backward compatibility for
+ * applications that expect an 8-bit return type.
+ *
+ * @param xTask Handle of the task associated with the stack to be checked.
+ * Set xTask to NULL to check the stack of the calling task.
+ *
+ * @return The smallest amount of free stack space there has been (in words, so
+ * actual spaces on the stack rather than bytes) since the task referenced by
+ * xTask was created.
+ */
+UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task.h
+ * 
configSTACK_DEPTH_TYPE uxTaskGetStackHighWaterMark2( TaskHandle_t xTask );

+ *
+ * INCLUDE_uxTaskGetStackHighWaterMark2 must be set to 1 in FreeRTOSConfig.h for
+ * this function to be available.
+ *
+ * Returns the high water mark of the stack associated with xTask.  That is,
+ * the minimum free stack space there has been (in words, so on a 32 bit machine
+ * a value of 1 means 4 bytes) since the task started.  The smaller the returned
+ * number the closer the task has come to overflowing its stack.
+ *
+ * uxTaskGetStackHighWaterMark() and uxTaskGetStackHighWaterMark2() are the
+ * same except for their return type.  Using configSTACK_DEPTH_TYPE allows the
+ * user to determine the return type.  It gets around the problem of the value
+ * overflowing on 8-bit types without breaking backward compatibility for
+ * applications that expect an 8-bit return type.
+ *
+ * @param xTask Handle of the task associated with the stack to be checked.
+ * Set xTask to NULL to check the stack of the calling task.
+ *
+ * @return The smallest amount of free stack space there has been (in words, so
+ * actual spaces on the stack rather than bytes) since the task referenced by
+ * xTask was created.
+ */
+configSTACK_DEPTH_TYPE uxTaskGetStackHighWaterMark2( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/* When using trace macros it is sometimes necessary to include task.h before
+FreeRTOS.h.  When this is done TaskHookFunction_t will not yet have been defined,
+so the following two prototypes will cause a compilation error.  This can be
+fixed by simply guarding against the inclusion of these two prototypes unless
+they are explicitly required by the configUSE_APPLICATION_TASK_TAG configuration
+constant. */
+#ifdef configUSE_APPLICATION_TASK_TAG
+	#if configUSE_APPLICATION_TASK_TAG == 1
+		/**
+		 * task.h
+		 * 
void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction );

+		 *
+		 * Sets pxHookFunction to be the task hook function used by the task xTask.
+		 * Passing xTask as NULL has the effect of setting the calling tasks hook
+		 * function.
+		 */
+		void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction ) PRIVILEGED_FUNCTION;
+
+		/**
+		 * task.h
+		 * 
void xTaskGetApplicationTaskTag( TaskHandle_t xTask );

+		 *
+		 * Returns the pxHookFunction value assigned to the task xTask.  Do not
+		 * call from an interrupt service routine - call
+		 * xTaskGetApplicationTaskTagFromISR() instead.
+		 */
+		TaskHookFunction_t xTaskGetApplicationTaskTag( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+		/**
+		 * task.h
+		 * 
void xTaskGetApplicationTaskTagFromISR( TaskHandle_t xTask );

+		 *
+		 * Returns the pxHookFunction value assigned to the task xTask.  Can
+		 * be called from an interrupt service routine.
+		 */
+		TaskHookFunction_t xTaskGetApplicationTaskTagFromISR( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+	#endif /* configUSE_APPLICATION_TASK_TAG ==1 */
+#endif /* ifdef configUSE_APPLICATION_TASK_TAG */
+
+#if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 )
+
+	/* Each task contains an array of pointers that is dimensioned by the
+	configNUM_THREAD_LOCAL_STORAGE_POINTERS setting in FreeRTOSConfig.h.  The
+	kernel does not use the pointers itself, so the application writer can use
+	the pointers for any purpose they wish.  The following two functions are
+	used to set and query a pointer respectively. */
+	void vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue ) PRIVILEGED_FUNCTION;
+	void *pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/**
+ * task.h
+ * 
BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter );

+ *
+ * Calls the hook function associated with xTask.  Passing xTask as NULL has
+ * the effect of calling the Running tasks (the calling task) hook function.
+ *
+ * pvParameter is passed to the hook function for the task to interpret as it
+ * wants.  The return value is the value returned by the task hook function
+ * registered by the user.
+ */
+BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter ) PRIVILEGED_FUNCTION;
+
+/**
+ * xTaskGetIdleTaskHandle() is only available if
+ * INCLUDE_xTaskGetIdleTaskHandle is set to 1 in FreeRTOSConfig.h.
+ *
+ * Simply returns the handle of the idle task.  It is not valid to call
+ * xTaskGetIdleTaskHandle() before the scheduler has been started.
+ */
+TaskHandle_t xTaskGetIdleTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * configUSE_TRACE_FACILITY must be defined as 1 in FreeRTOSConfig.h for
+ * uxTaskGetSystemState() to be available.
+ *
+ * uxTaskGetSystemState() populates an TaskStatus_t structure for each task in
+ * the system.  TaskStatus_t structures contain, among other things, members
+ * for the task handle, task name, task priority, task state, and total amount
+ * of run time consumed by the task.  See the TaskStatus_t structure
+ * definition in this file for the full member list.
+ *
+ * NOTE:  This function is intended for debugging use only as its use results in
+ * the scheduler remaining suspended for an extended period.
+ *
+ * @param pxTaskStatusArray A pointer to an array of TaskStatus_t structures.
+ * The array must contain at least one TaskStatus_t structure for each task
+ * that is under the control of the RTOS.  The number of tasks under the control
+ * of the RTOS can be determined using the uxTaskGetNumberOfTasks() API function.
+ *
+ * @param uxArraySize The size of the array pointed to by the pxTaskStatusArray
+ * parameter.  The size is specified as the number of indexes in the array, or
+ * the number of TaskStatus_t structures contained in the array, not by the
+ * number of bytes in the array.
+ *
+ * @param pulTotalRunTime If configGENERATE_RUN_TIME_STATS is set to 1 in
+ * FreeRTOSConfig.h then *pulTotalRunTime is set by uxTaskGetSystemState() to the
+ * total run time (as defined by the run time stats clock, see
+ * http://www.freertos.org/rtos-run-time-stats.html) since the target booted.
+ * pulTotalRunTime can be set to NULL to omit the total run time information.
+ *
+ * @return The number of TaskStatus_t structures that were populated by
+ * uxTaskGetSystemState().  This should equal the number returned by the
+ * uxTaskGetNumberOfTasks() API function, but will be zero if the value passed
+ * in the uxArraySize parameter was too small.
+ *
+ * Example usage:
+   
+    // This example demonstrates how a human readable table of run time stats
+	// information is generated from raw data provided by uxTaskGetSystemState().
+	// The human readable table is written to pcWriteBuffer
+	void vTaskGetRunTimeStats( char *pcWriteBuffer )
+	{
+	TaskStatus_t *pxTaskStatusArray;
+	volatile UBaseType_t uxArraySize, x;
+	uint32_t ulTotalRunTime, ulStatsAsPercentage;
+
+		// Make sure the write buffer does not contain a string.
+		*pcWriteBuffer = 0x00;
+
+		// Take a snapshot of the number of tasks in case it changes while this
+		// function is executing.
+		uxArraySize = uxTaskGetNumberOfTasks();
+
+		// Allocate a TaskStatus_t structure for each task.  An array could be
+		// allocated statically at compile time.
+		pxTaskStatusArray = pvPortMalloc( uxArraySize * sizeof( TaskStatus_t ) );
+
+		if( pxTaskStatusArray != NULL )
+		{
+			// Generate raw status information about each task.
+			uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, &ulTotalRunTime );
+
+			// For percentage calculations.
+			ulTotalRunTime /= 100UL;
+
+			// Avoid divide by zero errors.
+			if( ulTotalRunTime > 0 )
+			{
+				// For each populated position in the pxTaskStatusArray array,
+				// format the raw data as human readable ASCII data
+				for( x = 0; x < uxArraySize; x++ )
+				{
+					// What percentage of the total run time has the task used?
+					// This will always be rounded down to the nearest integer.
+					// ulTotalRunTimeDiv100 has already been divided by 100.
+					ulStatsAsPercentage = pxTaskStatusArray[ x ].ulRunTimeCounter / ulTotalRunTime;
+
+					if( ulStatsAsPercentage > 0UL )
+					{
+						sprintf( pcWriteBuffer, "%s\t\t%lu\t\t%lu%%\r\n", pxTaskStatusArray[ x ].pcTaskName, pxTaskStatusArray[ x ].ulRunTimeCounter, ulStatsAsPercentage );
+					}
+					else
+					{
+						// If the percentage is zero here then the task has
+						// consumed less than 1% of the total run time.
+						sprintf( pcWriteBuffer, "%s\t\t%lu\t\t<1%%\r\n", pxTaskStatusArray[ x ].pcTaskName, pxTaskStatusArray[ x ].ulRunTimeCounter );
+					}
+
+					pcWriteBuffer += strlen( ( char * ) pcWriteBuffer );
+				}
+			}
+
+			// The array is no longer needed, free the memory it consumes.
+			vPortFree( pxTaskStatusArray );
+		}
+	}
+	

+ */
+UBaseType_t uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
void vTaskList( char *pcWriteBuffer );

+ *
+ * configUSE_TRACE_FACILITY and configUSE_STATS_FORMATTING_FUNCTIONS must
+ * both be defined as 1 for this function to be available.  See the
+ * configuration section of the FreeRTOS.org website for more information.
+ *
+ * NOTE 1: This function will disable interrupts for its duration.  It is
+ * not intended for normal application runtime use but as a debug aid.
+ *
+ * Lists all the current tasks, along with their current state and stack
+ * usage high water mark.
+ *
+ * Tasks are reported as blocked ('B'), ready ('R'), deleted ('D') or
+ * suspended ('S').
+ *
+ * PLEASE NOTE:
+ *
+ * This function is provided for convenience only, and is used by many of the
+ * demo applications.  Do not consider it to be part of the scheduler.
+ *
+ * vTaskList() calls uxTaskGetSystemState(), then formats part of the
+ * uxTaskGetSystemState() output into a human readable table that displays task
+ * names, states and stack usage.
+ *
+ * vTaskList() has a dependency on the sprintf() C library function that might
+ * bloat the code size, use a lot of stack, and provide different results on
+ * different platforms.  An alternative, tiny, third party, and limited
+ * functionality implementation of sprintf() is provided in many of the
+ * FreeRTOS/Demo sub-directories in a file called printf-stdarg.c (note
+ * printf-stdarg.c does not provide a full snprintf() implementation!).
+ *
+ * It is recommended that production systems call uxTaskGetSystemState()
+ * directly to get access to raw stats data, rather than indirectly through a
+ * call to vTaskList().
+ *
+ * @param pcWriteBuffer A buffer into which the above mentioned details
+ * will be written, in ASCII form.  This buffer is assumed to be large
+ * enough to contain the generated report.  Approximately 40 bytes per
+ * task should be sufficient.
+ *
+ * \defgroup vTaskList vTaskList
+ * \ingroup TaskUtils
+ */
+void vTaskList( char * pcWriteBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * task. h
+ * 
void vTaskGetRunTimeStats( char *pcWriteBuffer );

+ *
+ * configGENERATE_RUN_TIME_STATS and configUSE_STATS_FORMATTING_FUNCTIONS
+ * must both be defined as 1 for this function to be available.  The application
+ * must also then provide definitions for
+ * portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and portGET_RUN_TIME_COUNTER_VALUE()
+ * to configure a peripheral timer/counter and return the timers current count
+ * value respectively.  The counter should be at least 10 times the frequency of
+ * the tick count.
+ *
+ * NOTE 1: This function will disable interrupts for its duration.  It is
+ * not intended for normal application runtime use but as a debug aid.
+ *
+ * Setting configGENERATE_RUN_TIME_STATS to 1 will result in a total
+ * accumulated execution time being stored for each task.  The resolution
+ * of the accumulated time value depends on the frequency of the timer
+ * configured by the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro.
+ * Calling vTaskGetRunTimeStats() writes the total execution time of each
+ * task into a buffer, both as an absolute count value and as a percentage
+ * of the total system execution time.
+ *
+ * NOTE 2:
+ *
+ * This function is provided for convenience only, and is used by many of the
+ * demo applications.  Do not consider it to be part of the scheduler.
+ *
+ * vTaskGetRunTimeStats() calls uxTaskGetSystemState(), then formats part of the
+ * uxTaskGetSystemState() output into a human readable table that displays the
+ * amount of time each task has spent in the Running state in both absolute and
+ * percentage terms.
+ *
+ * vTaskGetRunTimeStats() has a dependency on the sprintf() C library function
+ * that might bloat the code size, use a lot of stack, and provide different
+ * results on different platforms.  An alternative, tiny, third party, and
+ * limited functionality implementation of sprintf() is provided in many of the
+ * FreeRTOS/Demo sub-directories in a file called printf-stdarg.c (note
+ * printf-stdarg.c does not provide a full snprintf() implementation!).
+ *
+ * It is recommended that production systems call uxTaskGetSystemState() directly
+ * to get access to raw stats data, rather than indirectly through a call to
+ * vTaskGetRunTimeStats().
+ *
+ * @param pcWriteBuffer A buffer into which the execution times will be
+ * written, in ASCII form.  This buffer is assumed to be large enough to
+ * contain the generated report.  Approximately 40 bytes per task should
+ * be sufficient.
+ *
+ * \defgroup vTaskGetRunTimeStats vTaskGetRunTimeStats
+ * \ingroup TaskUtils
+ */
+void vTaskGetRunTimeStats( char *pcWriteBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+* task. h
+* 
uint32_t ulTaskGetIdleRunTimeCounter( void );

+*
+* configGENERATE_RUN_TIME_STATS and configUSE_STATS_FORMATTING_FUNCTIONS
+* must both be defined as 1 for this function to be available.  The application
+* must also then provide definitions for
+* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and portGET_RUN_TIME_COUNTER_VALUE()
+* to configure a peripheral timer/counter and return the timers current count
+* value respectively.  The counter should be at least 10 times the frequency of
+* the tick count.
+*
+* Setting configGENERATE_RUN_TIME_STATS to 1 will result in a total
+* accumulated execution time being stored for each task.  The resolution
+* of the accumulated time value depends on the frequency of the timer
+* configured by the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro.
+* While uxTaskGetSystemState() and vTaskGetRunTimeStats() writes the total
+* execution time of each task into a buffer, ulTaskGetIdleRunTimeCounter()
+* returns the total execution time of just the idle task.
+*
+* @return The total run time of the idle task.  This is the amount of time the
+* idle task has actually been executing.  The unit of time is dependent on the
+* frequency configured using the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and
+* portGET_RUN_TIME_COUNTER_VALUE() macros.
+*
+* \defgroup ulTaskGetIdleRunTimeCounter ulTaskGetIdleRunTimeCounter
+* \ingroup TaskUtils
+*/
+uint32_t ulTaskGetIdleRunTimeCounter( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
BaseType_t xTaskNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction );

+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * A notification sent to a task will remain pending until it is cleared by the
+ * task calling xTaskNotifyWait() or ulTaskNotifyTake().  If the task was
+ * already in the Blocked state to wait for a notification when the notification
+ * arrives then the task will automatically be removed from the Blocked state
+ * (unblocked) and the notification cleared.
+ *
+ * A task can use xTaskNotifyWait() to [optionally] block to wait for a
+ * notification to be pending, or ulTaskNotifyTake() to [optionally] block
+ * to wait for its notification value to have a non-zero value.  The task does
+ * not consume any CPU time while it is in the Blocked state.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param xTaskToNotify The handle of the task being notified.  The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @param ulValue Data that can be sent with the notification.  How the data is
+ * used depends on the value of the eAction parameter.
+ *
+ * @param eAction Specifies how the notification updates the task's notification
+ * value, if at all.  Valid values for eAction are as follows:
+ *
+ * eSetBits -
+ * The task's notification value is bitwise ORed with ulValue.  xTaskNofify()
+ * always returns pdPASS in this case.
+ *
+ * eIncrement -
+ * The task's notification value is incremented.  ulValue is not used and
+ * xTaskNotify() always returns pdPASS in this case.
+ *
+ * eSetValueWithOverwrite -
+ * The task's notification value is set to the value of ulValue, even if the
+ * task being notified had not yet processed the previous notification (the
+ * task already had a notification pending).  xTaskNotify() always returns
+ * pdPASS in this case.
+ *
+ * eSetValueWithoutOverwrite -
+ * If the task being notified did not already have a notification pending then
+ * the task's notification value is set to ulValue and xTaskNotify() will
+ * return pdPASS.  If the task being notified already had a notification
+ * pending then no action is performed and pdFAIL is returned.
+ *
+ * eNoAction -
+ * The task receives a notification without its notification value being
+ * updated.  ulValue is not used and xTaskNotify() always returns pdPASS in
+ * this case.
+ *
+ *  pulPreviousNotificationValue -
+ *  Can be used to pass out the subject task's notification value before any
+ *  bits are modified by the notify function.
+ *
+ * @return Dependent on the value of eAction.  See the description of the
+ * eAction parameter.
+ *
+ * \defgroup xTaskNotify xTaskNotify
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue ) PRIVILEGED_FUNCTION;
+#define xTaskNotify( xTaskToNotify, ulValue, eAction ) xTaskGenericNotify( ( xTaskToNotify ), ( ulValue ), ( eAction ), NULL )
+#define xTaskNotifyAndQuery( xTaskToNotify, ulValue, eAction, pulPreviousNotifyValue ) xTaskGenericNotify( ( xTaskToNotify ), ( ulValue ), ( eAction ), ( pulPreviousNotifyValue ) )
+
+/**
+ * task. h
+ * 
BaseType_t xTaskNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, BaseType_t *pxHigherPriorityTaskWoken );

+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * A version of xTaskNotify() that can be used from an interrupt service routine
+ * (ISR).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * A notification sent to a task will remain pending until it is cleared by the
+ * task calling xTaskNotifyWait() or ulTaskNotifyTake().  If the task was
+ * already in the Blocked state to wait for a notification when the notification
+ * arrives then the task will automatically be removed from the Blocked state
+ * (unblocked) and the notification cleared.
+ *
+ * A task can use xTaskNotifyWait() to [optionally] block to wait for a
+ * notification to be pending, or ulTaskNotifyTake() to [optionally] block
+ * to wait for its notification value to have a non-zero value.  The task does
+ * not consume any CPU time while it is in the Blocked state.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param xTaskToNotify The handle of the task being notified.  The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @param ulValue Data that can be sent with the notification.  How the data is
+ * used depends on the value of the eAction parameter.
+ *
+ * @param eAction Specifies how the notification updates the task's notification
+ * value, if at all.  Valid values for eAction are as follows:
+ *
+ * eSetBits -
+ * The task's notification value is bitwise ORed with ulValue.  xTaskNofify()
+ * always returns pdPASS in this case.
+ *
+ * eIncrement -
+ * The task's notification value is incremented.  ulValue is not used and
+ * xTaskNotify() always returns pdPASS in this case.
+ *
+ * eSetValueWithOverwrite -
+ * The task's notification value is set to the value of ulValue, even if the
+ * task being notified had not yet processed the previous notification (the
+ * task already had a notification pending).  xTaskNotify() always returns
+ * pdPASS in this case.
+ *
+ * eSetValueWithoutOverwrite -
+ * If the task being notified did not already have a notification pending then
+ * the task's notification value is set to ulValue and xTaskNotify() will
+ * return pdPASS.  If the task being notified already had a notification
+ * pending then no action is performed and pdFAIL is returned.
+ *
+ * eNoAction -
+ * The task receives a notification without its notification value being
+ * updated.  ulValue is not used and xTaskNotify() always returns pdPASS in
+ * this case.
+ *
+ * @param pxHigherPriorityTaskWoken  xTaskNotifyFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending the notification caused the
+ * task to which the notification was sent to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently running task.  If
+ * xTaskNotifyFromISR() sets this value to pdTRUE then a context switch should
+ * be requested before the interrupt is exited.  How a context switch is
+ * requested from an ISR is dependent on the port - see the documentation page
+ * for the port in use.
+ *
+ * @return Dependent on the value of eAction.  See the description of the
+ * eAction parameter.
+ *
+ * \defgroup xTaskNotify xTaskNotify
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskGenericNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+#define xTaskNotifyFromISR( xTaskToNotify, ulValue, eAction, pxHigherPriorityTaskWoken ) xTaskGenericNotifyFromISR( ( xTaskToNotify ), ( ulValue ), ( eAction ), NULL, ( pxHigherPriorityTaskWoken ) )
+#define xTaskNotifyAndQueryFromISR( xTaskToNotify, ulValue, eAction, pulPreviousNotificationValue, pxHigherPriorityTaskWoken ) xTaskGenericNotifyFromISR( ( xTaskToNotify ), ( ulValue ), ( eAction ), ( pulPreviousNotificationValue ), ( pxHigherPriorityTaskWoken ) )
+
+/**
+ * task. h
+ * 
BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait );

+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * A notification sent to a task will remain pending until it is cleared by the
+ * task calling xTaskNotifyWait() or ulTaskNotifyTake().  If the task was
+ * already in the Blocked state to wait for a notification when the notification
+ * arrives then the task will automatically be removed from the Blocked state
+ * (unblocked) and the notification cleared.
+ *
+ * A task can use xTaskNotifyWait() to [optionally] block to wait for a
+ * notification to be pending, or ulTaskNotifyTake() to [optionally] block
+ * to wait for its notification value to have a non-zero value.  The task does
+ * not consume any CPU time while it is in the Blocked state.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param ulBitsToClearOnEntry Bits that are set in ulBitsToClearOnEntry value
+ * will be cleared in the calling task's notification value before the task
+ * checks to see if any notifications are pending, and optionally blocks if no
+ * notifications are pending.  Setting ulBitsToClearOnEntry to ULONG_MAX (if
+ * limits.h is included) or 0xffffffffUL (if limits.h is not included) will have
+ * the effect of resetting the task's notification value to 0.  Setting
+ * ulBitsToClearOnEntry to 0 will leave the task's notification value unchanged.
+ *
+ * @param ulBitsToClearOnExit If a notification is pending or received before
+ * the calling task exits the xTaskNotifyWait() function then the task's
+ * notification value (see the xTaskNotify() API function) is passed out using
+ * the pulNotificationValue parameter.  Then any bits that are set in
+ * ulBitsToClearOnExit will be cleared in the task's notification value (note
+ * *pulNotificationValue is set before any bits are cleared).  Setting
+ * ulBitsToClearOnExit to ULONG_MAX (if limits.h is included) or 0xffffffffUL
+ * (if limits.h is not included) will have the effect of resetting the task's
+ * notification value to 0 before the function exits.  Setting
+ * ulBitsToClearOnExit to 0 will leave the task's notification value unchanged
+ * when the function exits (in which case the value passed out in
+ * pulNotificationValue will match the task's notification value).
+ *
+ * @param pulNotificationValue Used to pass the task's notification value out
+ * of the function.  Note the value passed out will not be effected by the
+ * clearing of any bits caused by ulBitsToClearOnExit being non-zero.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait in
+ * the Blocked state for a notification to be received, should a notification
+ * not already be pending when xTaskNotifyWait() was called.  The task
+ * will not consume any processing time while it is in the Blocked state.  This
+ * is specified in kernel ticks, the macro pdMS_TO_TICSK( value_in_ms ) can be
+ * used to convert a time specified in milliseconds to a time specified in
+ * ticks.
+ *
+ * @return If a notification was received (including notifications that were
+ * already pending when xTaskNotifyWait was called) then pdPASS is
+ * returned.  Otherwise pdFAIL is returned.
+ *
+ * \defgroup xTaskNotifyWait xTaskNotifyWait
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
BaseType_t xTaskNotifyGive( TaskHandle_t xTaskToNotify );

+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this macro
+ * to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * xTaskNotifyGive() is a helper macro intended for use when task notifications
+ * are used as light weight and faster binary or counting semaphore equivalents.
+ * Actual FreeRTOS semaphores are given using the xSemaphoreGive() API function,
+ * the equivalent action that instead uses a task notification is
+ * xTaskNotifyGive().
+ *
+ * When task notifications are being used as a binary or counting semaphore
+ * equivalent then the task being notified should wait for the notification
+ * using the ulTaskNotificationTake() API function rather than the
+ * xTaskNotifyWait() API function.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for more details.
+ *
+ * @param xTaskToNotify The handle of the task being notified.  The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @return xTaskNotifyGive() is a macro that calls xTaskNotify() with the
+ * eAction parameter set to eIncrement - so pdPASS is always returned.
+ *
+ * \defgroup xTaskNotifyGive xTaskNotifyGive
+ * \ingroup TaskNotifications
+ */
+#define xTaskNotifyGive( xTaskToNotify ) xTaskGenericNotify( ( xTaskToNotify ), ( 0 ), eIncrement, NULL )
+
+/**
+ * task. h
+ * 
void vTaskNotifyGiveFromISR( TaskHandle_t xTaskHandle, BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this macro
+ * to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * A version of xTaskNotifyGive() that can be called from an interrupt service
+ * routine (ISR).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * vTaskNotifyGiveFromISR() is intended for use when task notifications are
+ * used as light weight and faster binary or counting semaphore equivalents.
+ * Actual FreeRTOS semaphores are given from an ISR using the
+ * xSemaphoreGiveFromISR() API function, the equivalent action that instead uses
+ * a task notification is vTaskNotifyGiveFromISR().
+ *
+ * When task notifications are being used as a binary or counting semaphore
+ * equivalent then the task being notified should wait for the notification
+ * using the ulTaskNotificationTake() API function rather than the
+ * xTaskNotifyWait() API function.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for more details.
+ *
+ * @param xTaskToNotify The handle of the task being notified.  The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @param pxHigherPriorityTaskWoken  vTaskNotifyGiveFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending the notification caused the
+ * task to which the notification was sent to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently running task.  If
+ * vTaskNotifyGiveFromISR() sets this value to pdTRUE then a context switch
+ * should be requested before the interrupt is exited.  How a context switch is
+ * requested from an ISR is dependent on the port - see the documentation page
+ * for the port in use.
+ *
+ * \defgroup xTaskNotifyWait xTaskNotifyWait
+ * \ingroup TaskNotifications
+ */
+void vTaskNotifyGiveFromISR( TaskHandle_t xTaskToNotify, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait );

+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * ulTaskNotifyTake() is intended for use when a task notification is used as a
+ * faster and lighter weight binary or counting semaphore alternative.  Actual
+ * FreeRTOS semaphores are taken using the xSemaphoreTake() API function, the
+ * equivalent action that instead uses a task notification is
+ * ulTaskNotifyTake().
+ *
+ * When a task is using its notification value as a binary or counting semaphore
+ * other tasks should send notifications to it using the xTaskNotifyGive()
+ * macro, or xTaskNotify() function with the eAction parameter set to
+ * eIncrement.
+ *
+ * ulTaskNotifyTake() can either clear the task's notification value to
+ * zero on exit, in which case the notification value acts like a binary
+ * semaphore, or decrement the task's notification value on exit, in which case
+ * the notification value acts like a counting semaphore.
+ *
+ * A task can use ulTaskNotifyTake() to [optionally] block to wait for a
+ * the task's notification value to be non-zero.  The task does not consume any
+ * CPU time while it is in the Blocked state.
+ *
+ * Where as xTaskNotifyWait() will return when a notification is pending,
+ * ulTaskNotifyTake() will return when the task's notification value is
+ * not zero.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param xClearCountOnExit if xClearCountOnExit is pdFALSE then the task's
+ * notification value is decremented when the function exits.  In this way the
+ * notification value acts like a counting semaphore.  If xClearCountOnExit is
+ * not pdFALSE then the task's notification value is cleared to zero when the
+ * function exits.  In this way the notification value acts like a binary
+ * semaphore.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait in
+ * the Blocked state for the task's notification value to be greater than zero,
+ * should the count not already be greater than zero when
+ * ulTaskNotifyTake() was called.  The task will not consume any processing
+ * time while it is in the Blocked state.  This is specified in kernel ticks,
+ * the macro pdMS_TO_TICSK( value_in_ms ) can be used to convert a time
+ * specified in milliseconds to a time specified in ticks.
+ *
+ * @return The task's notification count before it is either cleared to zero or
+ * decremented (see the xClearCountOnExit parameter).
+ *
+ * \defgroup ulTaskNotifyTake ulTaskNotifyTake
+ * \ingroup TaskNotifications
+ */
+uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask );

+ *
+ * If the notification state of the task referenced by the handle xTask is
+ * eNotified, then set the task's notification state to eNotWaitingNotification.
+ * The task's notification value is not altered.  Set xTask to NULL to clear the
+ * notification state of the calling task.
+ *
+ * @return pdTRUE if the task's notification state was set to
+ * eNotWaitingNotification, otherwise pdFALSE.
+ * \defgroup xTaskNotifyStateClear xTaskNotifyStateClear
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask );
+
+/**
+* task. h
+* 
uint32_t ulTaskNotifyValueClear( TaskHandle_t xTask, uint32_t ulBitsToClear );

+*
+* Clears the bits specified by the ulBitsToClear bit mask in the notification
+* value of the task referenced by xTask.
+*
+* Set ulBitsToClear to 0xffffffff (UINT_MAX on 32-bit architectures) to clear
+* the notification value to 0.  Set ulBitsToClear to 0 to query the task's
+* notification value without clearing any bits.
+*
+* @return The value of the target task's notification value before the bits
+* specified by ulBitsToClear were cleared.
+* \defgroup ulTaskNotifyValueClear ulTaskNotifyValueClear
+* \ingroup TaskNotifications
+*/
+uint32_t ulTaskNotifyValueClear( TaskHandle_t xTask, uint32_t ulBitsToClear ) PRIVILEGED_FUNCTION;
+
+/**
+ * task.h
+ * 
void vTaskSetTimeOutState( TimeOut_t * const pxTimeOut )

+ *
+ * Capture the current time for future use with xTaskCheckForTimeOut().
+ *
+ * @param pxTimeOut Pointer to a timeout object into which the current time
+ * is to be captured.  The captured time includes the tick count and the number
+ * of times the tick count has overflowed since the system first booted.
+ * \defgroup vTaskSetTimeOutState vTaskSetTimeOutState
+ * \ingroup TaskCtrl
+ */
+void vTaskSetTimeOutState( TimeOut_t * const pxTimeOut ) PRIVILEGED_FUNCTION;
+
+/**
+ * task.h
+ * 
BaseType_t xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait );

+ *
+ * Determines if pxTicksToWait ticks has passed since a time was captured
+ * using a call to vTaskSetTimeOutState().  The captured time includes the tick
+ * count and the number of times the tick count has overflowed.
+ *
+ * @param pxTimeOut The time status as captured previously using
+ * vTaskSetTimeOutState. If the timeout has not yet occurred, it is updated
+ * to reflect the current time status.
+ * @param pxTicksToWait The number of ticks to check for timeout i.e. if
+ * pxTicksToWait ticks have passed since pxTimeOut was last updated (either by
+ * vTaskSetTimeOutState() or xTaskCheckForTimeOut()), the timeout has occurred.
+ * If the timeout has not occurred, pxTIcksToWait is updated to reflect the
+ * number of remaining ticks.
+ *
+ * @return If timeout has occurred, pdTRUE is returned. Otherwise pdFALSE is
+ * returned and pxTicksToWait is updated to reflect the number of remaining
+ * ticks.
+ *
+ * @see https://www.freertos.org/xTaskCheckForTimeOut.html
+ *
+ * Example Usage:
+ * 
+	// Driver library function used to receive uxWantedBytes from an Rx buffer
+	// that is filled by a UART interrupt. If there are not enough bytes in the
+	// Rx buffer then the task enters the Blocked state until it is notified that
+	// more data has been placed into the buffer. If there is still not enough
+	// data then the task re-enters the Blocked state, and xTaskCheckForTimeOut()
+	// is used to re-calculate the Block time to ensure the total amount of time
+	// spent in the Blocked state does not exceed MAX_TIME_TO_WAIT. This
+	// continues until either the buffer contains at least uxWantedBytes bytes,
+	// or the total amount of time spent in the Blocked state reaches
+	// MAX_TIME_TO_WAIT – at which point the task reads however many bytes are
+	// available up to a maximum of uxWantedBytes.
+
+	size_t xUART_Receive( uint8_t *pucBuffer, size_t uxWantedBytes )
+	{
+	size_t uxReceived = 0;
+	TickType_t xTicksToWait = MAX_TIME_TO_WAIT;
+	TimeOut_t xTimeOut;
+
+		// Initialize xTimeOut.  This records the time at which this function
+		// was entered.
+		vTaskSetTimeOutState( &xTimeOut );
+
+		// Loop until the buffer contains the wanted number of bytes, or a
+		// timeout occurs.
+		while( UART_bytes_in_rx_buffer( pxUARTInstance ) < uxWantedBytes )
+		{
+			// The buffer didn't contain enough data so this task is going to
+			// enter the Blocked state. Adjusting xTicksToWait to account for
+			// any time that has been spent in the Blocked state within this
+			// function so far to ensure the total amount of time spent in the
+			// Blocked state does not exceed MAX_TIME_TO_WAIT.
+			if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) != pdFALSE )
+			{
+				//Timed out before the wanted number of bytes were available,
+				// exit the loop.
+				break;
+			}
+
+			// Wait for a maximum of xTicksToWait ticks to be notified that the
+			// receive interrupt has placed more data into the buffer.
+			ulTaskNotifyTake( pdTRUE, xTicksToWait );
+		}
+
+		// Attempt to read uxWantedBytes from the receive buffer into pucBuffer.
+		// The actual number of bytes read (which might be less than
+		// uxWantedBytes) is returned.
+		uxReceived = UART_read_from_receive_buffer( pxUARTInstance,
+													pucBuffer,
+													uxWantedBytes );
+
+		return uxReceived;
+	}
+ 

+ * \defgroup xTaskCheckForTimeOut xTaskCheckForTimeOut
+ * \ingroup TaskCtrl
+ */
+BaseType_t xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES
+ *----------------------------------------------------------*/
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Called from the real time kernel tick (either preemptive or cooperative),
+ * this increments the tick count and checks if any tasks that are blocked
+ * for a finite period required removing from a blocked list and placing on
+ * a ready list.  If a non-zero value is returned then a context switch is
+ * required because either:
+ *   + A task was removed from a blocked list because its timeout had expired,
+ *     or
+ *   + Time slicing is in use and there is a task of equal priority to the
+ *     currently running task.
+ */
+BaseType_t xTaskIncrementTick( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes the calling task from the ready list and places it both
+ * on the list of tasks waiting for a particular event, and the
+ * list of delayed tasks.  The task will be removed from both lists
+ * and replaced on the ready list should either the event occur (and
+ * there be no higher priority tasks waiting on the same event) or
+ * the delay period expires.
+ *
+ * The 'unordered' version replaces the event list item value with the
+ * xItemValue value, and inserts the list item at the end of the list.
+ *
+ * The 'ordered' version uses the existing event list item value (which is the
+ * owning tasks priority) to insert the list item into the event list is task
+ * priority order.
+ *
+ * @param pxEventList The list containing tasks that are blocked waiting
+ * for the event to occur.
+ *
+ * @param xItemValue The item value to use for the event list item when the
+ * event list is not ordered by task priority.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait
+ * for the event to occur.  This is specified in kernel ticks,the constant
+ * portTICK_PERIOD_MS can be used to convert kernel ticks into a real time
+ * period.
+ */
+void vTaskPlaceOnEventList( List_t * const pxEventList, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+void vTaskPlaceOnUnorderedEventList( List_t * pxEventList, const TickType_t xItemValue, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * This function performs nearly the same function as vTaskPlaceOnEventList().
+ * The difference being that this function does not permit tasks to block
+ * indefinitely, whereas vTaskPlaceOnEventList() does.
+ *
+ */
+void vTaskPlaceOnEventListRestricted( List_t * const pxEventList, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes a task from both the specified event list and the list of blocked
+ * tasks, and places it on a ready queue.
+ *
+ * xTaskRemoveFromEventList()/vTaskRemoveFromUnorderedEventList() will be called
+ * if either an event occurs to unblock a task, or the block timeout period
+ * expires.
+ *
+ * xTaskRemoveFromEventList() is used when the event list is in task priority
+ * order.  It removes the list item from the head of the event list as that will
+ * have the highest priority owning task of all the tasks on the event list.
+ * vTaskRemoveFromUnorderedEventList() is used when the event list is not
+ * ordered and the event list items hold something other than the owning tasks
+ * priority.  In this case the event list item value is updated to the value
+ * passed in the xItemValue parameter.
+ *
+ * @return pdTRUE if the task being removed has a higher priority than the task
+ * making the call, otherwise pdFALSE.
+ */
+BaseType_t xTaskRemoveFromEventList( const List_t * const pxEventList ) PRIVILEGED_FUNCTION;
+void vTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Sets the pointer to the current TCB to the TCB of the highest priority task
+ * that is ready to run.
+ */
+portDONT_DISCARD void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THESE FUNCTIONS MUST NOT BE USED FROM APPLICATION CODE.  THEY ARE USED BY
+ * THE EVENT BITS MODULE.
+ */
+TickType_t uxTaskResetEventItemValue( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Return the handle of the calling task.
+ */
+TaskHandle_t xTaskGetCurrentTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Shortcut used by the queue implementation to prevent unnecessary call to
+ * taskYIELD();
+ */
+void vTaskMissedYield( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Returns the scheduler state as taskSCHEDULER_RUNNING,
+ * taskSCHEDULER_NOT_STARTED or taskSCHEDULER_SUSPENDED.
+ */
+BaseType_t xTaskGetSchedulerState( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Raises the priority of the mutex holder to that of the calling task should
+ * the mutex holder have a priority less than the calling task.
+ */
+BaseType_t xTaskPriorityInherit( TaskHandle_t const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * Set the priority of a task back to its proper priority in the case that it
+ * inherited a higher priority while it was holding a semaphore.
+ */
+BaseType_t xTaskPriorityDisinherit( TaskHandle_t const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * If a higher priority task attempting to obtain a mutex caused a lower
+ * priority task to inherit the higher priority task's priority - but the higher
+ * priority task then timed out without obtaining the mutex, then the lower
+ * priority task will disinherit the priority again - but only down as far as
+ * the highest priority task that is still waiting for the mutex (if there were
+ * more than one task waiting for the mutex).
+ */
+void vTaskPriorityDisinheritAfterTimeout( TaskHandle_t const pxMutexHolder, UBaseType_t uxHighestPriorityWaitingTask ) PRIVILEGED_FUNCTION;
+
+/*
+ * Get the uxTCBNumber assigned to the task referenced by the xTask parameter.
+ */
+UBaseType_t uxTaskGetTaskNumber( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/*
+ * Set the uxTaskNumber of the task referenced by the xTask parameter to
+ * uxHandle.
+ */
+void vTaskSetTaskNumber( TaskHandle_t xTask, const UBaseType_t uxHandle ) PRIVILEGED_FUNCTION;
+
+/*
+ * Only available when configUSE_TICKLESS_IDLE is set to 1.
+ * If tickless mode is being used, or a low power mode is implemented, then
+ * the tick interrupt will not execute during idle periods.  When this is the
+ * case, the tick count value maintained by the scheduler needs to be kept up
+ * to date with the actual execution time by being skipped forward by a time
+ * equal to the idle period.
+ */
+void vTaskStepTick( const TickType_t xTicksToJump ) PRIVILEGED_FUNCTION;
+
+/* Correct the tick count value after the application code has held
+interrupts disabled for an extended period.  xTicksToCatchUp is the number
+of tick interrupts that have been missed due to interrupts being disabled.
+Its value is not computed automatically, so must be computed by the
+application writer.
+
+This function is similar to vTaskStepTick(), however, unlike
+vTaskStepTick(), xTaskCatchUpTicks() may move the tick count forward past a
+time at which a task should be removed from the blocked state.  That means
+tasks may have to be removed from the blocked state as the tick count is
+moved. */
+BaseType_t xTaskCatchUpTicks( TickType_t xTicksToCatchUp ) PRIVILEGED_FUNCTION;
+
+/*
+ * Only available when configUSE_TICKLESS_IDLE is set to 1.
+ * Provided for use within portSUPPRESS_TICKS_AND_SLEEP() to allow the port
+ * specific sleep function to determine if it is ok to proceed with the sleep,
+ * and if it is ok to proceed, if it is ok to sleep indefinitely.
+ *
+ * This function is necessary because portSUPPRESS_TICKS_AND_SLEEP() is only
+ * called with the scheduler suspended, not from within a critical section.  It
+ * is therefore possible for an interrupt to request a context switch between
+ * portSUPPRESS_TICKS_AND_SLEEP() and the low power mode actually being
+ * entered.  eTaskConfirmSleepModeStatus() should be called from a short
+ * critical section between the timer being stopped and the sleep mode being
+ * entered to ensure it is ok to proceed into the sleep mode.
+ */
+eSleepModeStatus eTaskConfirmSleepModeStatus( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * For internal use only.  Increment the mutex held count when a mutex is
+ * taken and return the handle of the task that has taken the mutex.
+ */
+TaskHandle_t pvTaskIncrementMutexHeldCount( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * For internal use only.  Same as vTaskSetTimeOutState(), but without a critial
+ * section.
+ */
+void vTaskInternalSetTimeOutState( TimeOut_t * const pxTimeOut ) PRIVILEGED_FUNCTION;
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* INC_TASK_H */
+
+
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/timers.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/timers.h
new file mode 100644
index 0000000..9ee2a0c
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/include/timers.h
@@ -0,0 +1,1309 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef TIMERS_H
+#define TIMERS_H
+
+#ifndef INC_FREERTOS_H
+	#error "include FreeRTOS.h must appear in source files before include timers.h"
+#endif
+
+/*lint -save -e537 This headers are only multiply included if the application code
+happens to also be including task.h. */
+#include "task.h"
+/*lint -restore */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * MACROS AND DEFINITIONS
+ *----------------------------------------------------------*/
+
+/* IDs for commands that can be sent/received on the timer queue.  These are to
+be used solely through the macros that make up the public software timer API,
+as defined below.  The commands that are sent from interrupts must use the
+highest numbers as tmrFIRST_FROM_ISR_COMMAND is used to determine if the task
+or interrupt version of the queue send function should be used. */
+#define tmrCOMMAND_EXECUTE_CALLBACK_FROM_ISR 	( ( BaseType_t ) -2 )
+#define tmrCOMMAND_EXECUTE_CALLBACK				( ( BaseType_t ) -1 )
+#define tmrCOMMAND_START_DONT_TRACE				( ( BaseType_t ) 0 )
+#define tmrCOMMAND_START					    ( ( BaseType_t ) 1 )
+#define tmrCOMMAND_RESET						( ( BaseType_t ) 2 )
+#define tmrCOMMAND_STOP							( ( BaseType_t ) 3 )
+#define tmrCOMMAND_CHANGE_PERIOD				( ( BaseType_t ) 4 )
+#define tmrCOMMAND_DELETE						( ( BaseType_t ) 5 )
+
+#define tmrFIRST_FROM_ISR_COMMAND				( ( BaseType_t ) 6 )
+#define tmrCOMMAND_START_FROM_ISR				( ( BaseType_t ) 6 )
+#define tmrCOMMAND_RESET_FROM_ISR				( ( BaseType_t ) 7 )
+#define tmrCOMMAND_STOP_FROM_ISR				( ( BaseType_t ) 8 )
+#define tmrCOMMAND_CHANGE_PERIOD_FROM_ISR		( ( BaseType_t ) 9 )
+
+
+/**
+ * Type by which software timers are referenced.  For example, a call to
+ * xTimerCreate() returns an TimerHandle_t variable that can then be used to
+ * reference the subject timer in calls to other software timer API functions
+ * (for example, xTimerStart(), xTimerReset(), etc.).
+ */
+struct tmrTimerControl; /* The old naming convention is used to prevent breaking kernel aware debuggers. */
+typedef struct tmrTimerControl * TimerHandle_t;
+
+/*
+ * Defines the prototype to which timer callback functions must conform.
+ */
+typedef void (*TimerCallbackFunction_t)( TimerHandle_t xTimer );
+
+/*
+ * Defines the prototype to which functions used with the
+ * xTimerPendFunctionCallFromISR() function must conform.
+ */
+typedef void (*PendedFunction_t)( void *, uint32_t );
+
+/**
+ * TimerHandle_t xTimerCreate( 	const char * const pcTimerName,
+ * 								TickType_t xTimerPeriodInTicks,
+ * 								UBaseType_t uxAutoReload,
+ * 								void * pvTimerID,
+ * 								TimerCallbackFunction_t pxCallbackFunction );
+ *
+ * Creates a new software timer instance, and returns a handle by which the
+ * created software timer can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, software timers use a block
+ * of memory, in which the timer data structure is stored.  If a software timer
+ * is created using xTimerCreate() then the required memory is automatically
+ * dynamically allocated inside the xTimerCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a software timer is created using
+ * xTimerCreateStatic() then the application writer must provide the memory that
+ * will get used by the software timer.  xTimerCreateStatic() therefore allows a
+ * software timer to be created without using any dynamic memory allocation.
+ *
+ * Timers are created in the dormant state.  The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a
+ * timer into the active state.
+ *
+ * @param pcTimerName A text name that is assigned to the timer.  This is done
+ * purely to assist debugging.  The kernel itself only ever references a timer
+ * by its handle, and never by its name.
+ *
+ * @param xTimerPeriodInTicks The timer period.  The time is defined in tick
+ * periods so the constant portTICK_PERIOD_MS can be used to convert a time that
+ * has been specified in milliseconds.  For example, if the timer must expire
+ * after 100 ticks, then xTimerPeriodInTicks should be set to 100.
+ * Alternatively, if the timer must expire after 500ms, then xPeriod can be set
+ * to ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than or
+ * equal to 1000.  Time timer period must be greater than 0.
+ *
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will
+ * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter.
+ * If uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and
+ * enter the dormant state after it expires.
+ *
+ * @param pvTimerID An identifier that is assigned to the timer being created.
+ * Typically this would be used in the timer callback function to identify which
+ * timer expired when the same callback function is assigned to more than one
+ * timer.
+ *
+ * @param pxCallbackFunction The function to call when the timer expires.
+ * Callback functions must have the prototype defined by TimerCallbackFunction_t,
+ * which is	"void vCallbackFunction( TimerHandle_t xTimer );".
+ *
+ * @return If the timer is successfully created then a handle to the newly
+ * created timer is returned.  If the timer cannot be created because there is
+ * insufficient FreeRTOS heap remaining to allocate the timer
+ * structures then NULL is returned.
+ *
+ * Example usage:
+ * @verbatim
+ * #define NUM_TIMERS 5
+ *
+ * // An array to hold handles to the created timers.
+ * TimerHandle_t xTimers[ NUM_TIMERS ];
+ *
+ * // An array to hold a count of the number of times each timer expires.
+ * int32_t lExpireCounters[ NUM_TIMERS ] = { 0 };
+ *
+ * // Define a callback function that will be used by multiple timer instances.
+ * // The callback function does nothing but count the number of times the
+ * // associated timer expires, and stop the timer once the timer has expired
+ * // 10 times.
+ * void vTimerCallback( TimerHandle_t pxTimer )
+ * {
+ * int32_t lArrayIndex;
+ * const int32_t xMaxExpiryCountBeforeStopping = 10;
+ *
+ * 	   // Optionally do something if the pxTimer parameter is NULL.
+ * 	   configASSERT( pxTimer );
+ *
+ *     // Which timer expired?
+ *     lArrayIndex = ( int32_t ) pvTimerGetTimerID( pxTimer );
+ *
+ *     // Increment the number of times that pxTimer has expired.
+ *     lExpireCounters[ lArrayIndex ] += 1;
+ *
+ *     // If the timer has expired 10 times then stop it from running.
+ *     if( lExpireCounters[ lArrayIndex ] == xMaxExpiryCountBeforeStopping )
+ *     {
+ *         // Do not use a block time if calling a timer API function from a
+ *         // timer callback function, as doing so could cause a deadlock!
+ *         xTimerStop( pxTimer, 0 );
+ *     }
+ * }
+ *
+ * void main( void )
+ * {
+ * int32_t x;
+ *
+ *     // Create then start some timers.  Starting the timers before the scheduler
+ *     // has been started means the timers will start running immediately that
+ *     // the scheduler starts.
+ *     for( x = 0; x < NUM_TIMERS; x++ )
+ *     {
+ *         xTimers[ x ] = xTimerCreate(    "Timer",       // Just a text name, not used by the kernel.
+ *                                         ( 100 * x ),   // The timer period in ticks.
+ *                                         pdTRUE,        // The timers will auto-reload themselves when they expire.
+ *                                         ( void * ) x,  // Assign each timer a unique id equal to its array index.
+ *                                         vTimerCallback // Each timer calls the same callback when it expires.
+ *                                     );
+ *
+ *         if( xTimers[ x ] == NULL )
+ *         {
+ *             // The timer was not created.
+ *         }
+ *         else
+ *         {
+ *             // Start the timer.  No block time is specified, and even if one was
+ *             // it would be ignored because the scheduler has not yet been
+ *             // started.
+ *             if( xTimerStart( xTimers[ x ], 0 ) != pdPASS )
+ *             {
+ *                 // The timer could not be set into the Active state.
+ *             }
+ *         }
+ *     }
+ *
+ *     // ...
+ *     // Create tasks here.
+ *     // ...
+ *
+ *     // Starting the scheduler will start the timers running as they have already
+ *     // been set into the active state.
+ *     vTaskStartScheduler();
+ *
+ *     // Should not reach here.
+ *     for( ;; );
+ * }
+ * @endverbatim
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	TimerHandle_t xTimerCreate(	const char * const pcTimerName,			/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+								const TickType_t xTimerPeriodInTicks,
+								const UBaseType_t uxAutoReload,
+								void * const pvTimerID,
+								TimerCallbackFunction_t pxCallbackFunction ) PRIVILEGED_FUNCTION;
+#endif
+
+/**
+ * TimerHandle_t xTimerCreateStatic(const char * const pcTimerName,
+ * 									TickType_t xTimerPeriodInTicks,
+ * 									UBaseType_t uxAutoReload,
+ * 									void * pvTimerID,
+ * 									TimerCallbackFunction_t pxCallbackFunction,
+ *									StaticTimer_t *pxTimerBuffer );
+ *
+ * Creates a new software timer instance, and returns a handle by which the
+ * created software timer can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, software timers use a block
+ * of memory, in which the timer data structure is stored.  If a software timer
+ * is created using xTimerCreate() then the required memory is automatically
+ * dynamically allocated inside the xTimerCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a software timer is created using
+ * xTimerCreateStatic() then the application writer must provide the memory that
+ * will get used by the software timer.  xTimerCreateStatic() therefore allows a
+ * software timer to be created without using any dynamic memory allocation.
+ *
+ * Timers are created in the dormant state.  The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a
+ * timer into the active state.
+ *
+ * @param pcTimerName A text name that is assigned to the timer.  This is done
+ * purely to assist debugging.  The kernel itself only ever references a timer
+ * by its handle, and never by its name.
+ *
+ * @param xTimerPeriodInTicks The timer period.  The time is defined in tick
+ * periods so the constant portTICK_PERIOD_MS can be used to convert a time that
+ * has been specified in milliseconds.  For example, if the timer must expire
+ * after 100 ticks, then xTimerPeriodInTicks should be set to 100.
+ * Alternatively, if the timer must expire after 500ms, then xPeriod can be set
+ * to ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than or
+ * equal to 1000.  The timer period must be greater than 0.
+ *
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will
+ * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter.
+ * If uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and
+ * enter the dormant state after it expires.
+ *
+ * @param pvTimerID An identifier that is assigned to the timer being created.
+ * Typically this would be used in the timer callback function to identify which
+ * timer expired when the same callback function is assigned to more than one
+ * timer.
+ *
+ * @param pxCallbackFunction The function to call when the timer expires.
+ * Callback functions must have the prototype defined by TimerCallbackFunction_t,
+ * which is "void vCallbackFunction( TimerHandle_t xTimer );".
+ *
+ * @param pxTimerBuffer Must point to a variable of type StaticTimer_t, which
+ * will be then be used to hold the software timer's data structures, removing
+ * the need for the memory to be allocated dynamically.
+ *
+ * @return If the timer is created then a handle to the created timer is
+ * returned.  If pxTimerBuffer was NULL then NULL is returned.
+ *
+ * Example usage:
+ * @verbatim
+ *
+ * // The buffer used to hold the software timer's data structure.
+ * static StaticTimer_t xTimerBuffer;
+ *
+ * // A variable that will be incremented by the software timer's callback
+ * // function.
+ * UBaseType_t uxVariableToIncrement = 0;
+ *
+ * // A software timer callback function that increments a variable passed to
+ * // it when the software timer was created.  After the 5th increment the
+ * // callback function stops the software timer.
+ * static void prvTimerCallback( TimerHandle_t xExpiredTimer )
+ * {
+ * UBaseType_t *puxVariableToIncrement;
+ * BaseType_t xReturned;
+ *
+ *     // Obtain the address of the variable to increment from the timer ID.
+ *     puxVariableToIncrement = ( UBaseType_t * ) pvTimerGetTimerID( xExpiredTimer );
+ *
+ *     // Increment the variable to show the timer callback has executed.
+ *     ( *puxVariableToIncrement )++;
+ *
+ *     // If this callback has executed the required number of times, stop the
+ *     // timer.
+ *     if( *puxVariableToIncrement == 5 )
+ *     {
+ *         // This is called from a timer callback so must not block.
+ *         xTimerStop( xExpiredTimer, staticDONT_BLOCK );
+ *     }
+ * }
+ *
+ *
+ * void main( void )
+ * {
+ *     // Create the software time.  xTimerCreateStatic() has an extra parameter
+ *     // than the normal xTimerCreate() API function.  The parameter is a pointer
+ *     // to the StaticTimer_t structure that will hold the software timer
+ *     // structure.  If the parameter is passed as NULL then the structure will be
+ *     // allocated dynamically, just as if xTimerCreate() had been called.
+ *     xTimer = xTimerCreateStatic( "T1",             // Text name for the task.  Helps debugging only.  Not used by FreeRTOS.
+ *                                  xTimerPeriod,     // The period of the timer in ticks.
+ *                                  pdTRUE,           // This is an auto-reload timer.
+ *                                  ( void * ) &uxVariableToIncrement,    // A variable incremented by the software timer's callback function
+ *                                  prvTimerCallback, // The function to execute when the timer expires.
+ *                                  &xTimerBuffer );  // The buffer that will hold the software timer structure.
+ *
+ *     // The scheduler has not started yet so a block time is not used.
+ *     xReturned = xTimerStart( xTimer, 0 );
+ *
+ *     // ...
+ *     // Create tasks here.
+ *     // ...
+ *
+ *     // Starting the scheduler will start the timers running as they have already
+ *     // been set into the active state.
+ *     vTaskStartScheduler();
+ *
+ *     // Should not reach here.
+ *     for( ;; );
+ * }
+ * @endverbatim
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	TimerHandle_t xTimerCreateStatic(	const char * const pcTimerName,			/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+										const TickType_t xTimerPeriodInTicks,
+										const UBaseType_t uxAutoReload,
+										void * const pvTimerID,
+										TimerCallbackFunction_t pxCallbackFunction,
+										StaticTimer_t *pxTimerBuffer ) PRIVILEGED_FUNCTION;
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * void *pvTimerGetTimerID( TimerHandle_t xTimer );
+ *
+ * Returns the ID assigned to the timer.
+ *
+ * IDs are assigned to timers using the pvTimerID parameter of the call to
+ * xTimerCreated() that was used to create the timer, and by calling the
+ * vTimerSetTimerID() API function.
+ *
+ * If the same callback function is assigned to multiple timers then the timer
+ * ID can be used as time specific (timer local) storage.
+ *
+ * @param xTimer The timer being queried.
+ *
+ * @return The ID assigned to the timer being queried.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ */
+void *pvTimerGetTimerID( const TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+ * void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID );
+ *
+ * Sets the ID assigned to the timer.
+ *
+ * IDs are assigned to timers using the pvTimerID parameter of the call to
+ * xTimerCreated() that was used to create the timer.
+ *
+ * If the same callback function is assigned to multiple timers then the timer
+ * ID can be used as time specific (timer local) storage.
+ *
+ * @param xTimer The timer being updated.
+ *
+ * @param pvNewID The ID to assign to the timer.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ */
+void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID ) PRIVILEGED_FUNCTION;
+
+/**
+ * BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer );
+ *
+ * Queries a timer to see if it is active or dormant.
+ *
+ * A timer will be dormant if:
+ *     1) It has been created but not started, or
+ *     2) It is an expired one-shot timer that has not been restarted.
+ *
+ * Timers are created in the dormant state.  The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a timer into the
+ * active state.
+ *
+ * @param xTimer The timer being queried.
+ *
+ * @return pdFALSE will be returned if the timer is dormant.  A value other than
+ * pdFALSE will be returned if the timer is active.
+ *
+ * Example usage:
+ * @verbatim
+ * // This function assumes xTimer has already been created.
+ * void vAFunction( TimerHandle_t xTimer )
+ * {
+ *     if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"
+ *     {
+ *         // xTimer is active, do something.
+ *     }
+ *     else
+ *     {
+ *         // xTimer is not active, do something else.
+ *     }
+ * }
+ * @endverbatim
+ */
+BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+ * TaskHandle_t xTimerGetTimerDaemonTaskHandle( void );
+ *
+ * Simply returns the handle of the timer service/daemon task.  It it not valid
+ * to call xTimerGetTimerDaemonTaskHandle() before the scheduler has been started.
+ */
+TaskHandle_t xTimerGetTimerDaemonTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * BaseType_t xTimerStart( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerStart() starts a timer that was previously created using the
+ * xTimerCreate() API function.  If the timer had already been started and was
+ * already in the active state, then xTimerStart() has equivalent functionality
+ * to the xTimerReset() API function.
+ *
+ * Starting a timer ensures the timer is in the active state.  If the timer
+ * is not stopped, deleted, or reset in the mean time, the callback function
+ * associated with the timer will get called 'n' ticks after xTimerStart() was
+ * called, where 'n' is the timers defined period.
+ *
+ * It is valid to call xTimerStart() before the scheduler has been started, but
+ * when this is done the timer will not actually start until the scheduler is
+ * started, and the timers expiry time will be relative to when the scheduler is
+ * started, not relative to when xTimerStart() was called.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStart()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being started/restarted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the start command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerStart() was called.  xTicksToWait is ignored if xTimerStart() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the start command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system, although the
+ * timers expiry time is relative to when xTimerStart() is actually called.  The
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ *
+ */
+#define xTimerStart( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCount() ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerStop( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerStop() stops a timer that was previously started using either of the
+ * The xTimerStart(), xTimerReset(), xTimerStartFromISR(), xTimerResetFromISR(),
+ * xTimerChangePeriod() or xTimerChangePeriodFromISR() API functions.
+ *
+ * Stopping a timer ensures the timer is not in the active state.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStop()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being stopped.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the stop command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerStop() was called.  xTicksToWait is ignored if xTimerStop() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the stop command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system.  The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ *
+ */
+#define xTimerStop( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0U, NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerChangePeriod( 	TimerHandle_t xTimer,
+ *										TickType_t xNewPeriod,
+ *										TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerChangePeriod() changes the period of a timer that was previously
+ * created using the xTimerCreate() API function.
+ *
+ * xTimerChangePeriod() can be called to change the period of an active or
+ * dormant state timer.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for
+ * xTimerChangePeriod() to be available.
+ *
+ * @param xTimer The handle of the timer that is having its period changed.
+ *
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in
+ * tick periods, so the constant portTICK_PERIOD_MS can be used to convert a time
+ * that has been specified in milliseconds.  For example, if the timer must
+ * expire after 100 ticks, then xNewPeriod should be set to 100.  Alternatively,
+ * if the timer must expire after 500ms, then xNewPeriod can be set to
+ * ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than
+ * or equal to 1000.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the change period command to be
+ * successfully sent to the timer command queue, should the queue already be
+ * full when xTimerChangePeriod() was called.  xTicksToWait is ignored if
+ * xTimerChangePeriod() is called before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the change period command could not be
+ * sent to the timer command queue even after xTicksToWait ticks had passed.
+ * pdPASS will be returned if the command was successfully sent to the timer
+ * command queue.  When the command is actually processed will depend on the
+ * priority of the timer service/daemon task relative to other tasks in the
+ * system.  The timer service/daemon task priority is set by the
+ * configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This function assumes xTimer has already been created.  If the timer
+ * // referenced by xTimer is already active when it is called, then the timer
+ * // is deleted.  If the timer referenced by xTimer is not active when it is
+ * // called, then the period of the timer is set to 500ms and the timer is
+ * // started.
+ * void vAFunction( TimerHandle_t xTimer )
+ * {
+ *     if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"
+ *     {
+ *         // xTimer is already active - delete it.
+ *         xTimerDelete( xTimer );
+ *     }
+ *     else
+ *     {
+ *         // xTimer is not active, change its period to 500ms.  This will also
+ *         // cause the timer to start.  Block for a maximum of 100 ticks if the
+ *         // change period command cannot immediately be sent to the timer
+ *         // command queue.
+ *         if( xTimerChangePeriod( xTimer, 500 / portTICK_PERIOD_MS, 100 ) == pdPASS )
+ *         {
+ *             // The command was successfully sent.
+ *         }
+ *         else
+ *         {
+ *             // The command could not be sent, even after waiting for 100 ticks
+ *             // to pass.  Take appropriate action here.
+ *         }
+ *     }
+ * }
+ * @endverbatim
+ */
+ #define xTimerChangePeriod( xTimer, xNewPeriod, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD, ( xNewPeriod ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerDelete( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerDelete() deletes a timer that was previously created using the
+ * xTimerCreate() API function.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for
+ * xTimerDelete() to be available.
+ *
+ * @param xTimer The handle of the timer being deleted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the delete command to be
+ * successfully sent to the timer command queue, should the queue already be
+ * full when xTimerDelete() was called.  xTicksToWait is ignored if xTimerDelete()
+ * is called before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the delete command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system.  The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerChangePeriod() API function example usage scenario.
+ */
+#define xTimerDelete( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_DELETE, 0U, NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerReset( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerReset() re-starts a timer that was previously created using the
+ * xTimerCreate() API function.  If the timer had already been started and was
+ * already in the active state, then xTimerReset() will cause the timer to
+ * re-evaluate its expiry time so that it is relative to when xTimerReset() was
+ * called.  If the timer was in the dormant state then xTimerReset() has
+ * equivalent functionality to the xTimerStart() API function.
+ *
+ * Resetting a timer ensures the timer is in the active state.  If the timer
+ * is not stopped, deleted, or reset in the mean time, the callback function
+ * associated with the timer will get called 'n' ticks after xTimerReset() was
+ * called, where 'n' is the timers defined period.
+ *
+ * It is valid to call xTimerReset() before the scheduler has been started, but
+ * when this is done the timer will not actually start until the scheduler is
+ * started, and the timers expiry time will be relative to when the scheduler is
+ * started, not relative to when xTimerReset() was called.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerReset()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being reset/started/restarted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the reset command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerReset() was called.  xTicksToWait is ignored if xTimerReset() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the reset command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system, although the
+ * timers expiry time is relative to when xTimerStart() is actually called.  The
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // When a key is pressed, an LCD back-light is switched on.  If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off.  In
+ * // this case, the timer is a one-shot timer.
+ *
+ * TimerHandle_t xBacklightTimer = NULL;
+ *
+ * // The callback function assigned to the one-shot timer.  In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ *     // The timer expired, therefore 5 seconds must have passed since a key
+ *     // was pressed.  Switch off the LCD back-light.
+ *     vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press event handler.
+ * void vKeyPressEventHandler( char cKey )
+ * {
+ *     // Ensure the LCD back-light is on, then reset the timer that is
+ *     // responsible for turning the back-light off after 5 seconds of
+ *     // key inactivity.  Wait 10 ticks for the command to be successfully sent
+ *     // if it cannot be sent immediately.
+ *     vSetBacklightState( BACKLIGHT_ON );
+ *     if( xTimerReset( xBacklightTimer, 100 ) != pdPASS )
+ *     {
+ *         // The reset command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // Perform the rest of the key processing here.
+ * }
+ *
+ * void main( void )
+ * {
+ * int32_t x;
+ *
+ *     // Create then start the one-shot timer that is responsible for turning
+ *     // the back-light off if no keys are pressed within a 5 second period.
+ *     xBacklightTimer = xTimerCreate( "BacklightTimer",           // Just a text name, not used by the kernel.
+ *                                     ( 5000 / portTICK_PERIOD_MS), // The timer period in ticks.
+ *                                     pdFALSE,                    // The timer is a one-shot timer.
+ *                                     0,                          // The id is not used by the callback so can take any value.
+ *                                     vBacklightTimerCallback     // The callback function that switches the LCD back-light off.
+ *                                   );
+ *
+ *     if( xBacklightTimer == NULL )
+ *     {
+ *         // The timer was not created.
+ *     }
+ *     else
+ *     {
+ *         // Start the timer.  No block time is specified, and even if one was
+ *         // it would be ignored because the scheduler has not yet been
+ *         // started.
+ *         if( xTimerStart( xBacklightTimer, 0 ) != pdPASS )
+ *         {
+ *             // The timer could not be set into the Active state.
+ *         }
+ *     }
+ *
+ *     // ...
+ *     // Create tasks here.
+ *     // ...
+ *
+ *     // Starting the scheduler will start the timer running as it has already
+ *     // been set into the active state.
+ *     vTaskStartScheduler();
+ *
+ *     // Should not reach here.
+ *     for( ;; );
+ * }
+ * @endverbatim
+ */
+#define xTimerReset( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_RESET, ( xTaskGetTickCount() ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerStartFromISR( 	TimerHandle_t xTimer,
+ *									BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerStart() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer being started/restarted.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerStartFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state.  If calling xTimerStartFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerStartFromISR() function.  If
+ * xTimerStartFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the start command could not be sent to
+ * the timer command queue.  pdPASS will be returned if the command was
+ * successfully sent to the timer command queue.  When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system, although the timers expiry time is
+ * relative to when xTimerStartFromISR() is actually called.  The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xBacklightTimer has already been created.  When a
+ * // key is pressed, an LCD back-light is switched on.  If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off.  In
+ * // this case, the timer is a one-shot timer, and unlike the example given for
+ * // the xTimerReset() function, the key press event handler is an interrupt
+ * // service routine.
+ *
+ * // The callback function assigned to the one-shot timer.  In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ *     // The timer expired, therefore 5 seconds must have passed since a key
+ *     // was pressed.  Switch off the LCD back-light.
+ *     vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press interrupt service routine.
+ * void vKeyPressEventInterruptHandler( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // Ensure the LCD back-light is on, then restart the timer that is
+ *     // responsible for turning the back-light off after 5 seconds of
+ *     // key inactivity.  This is an interrupt service routine so can only
+ *     // call FreeRTOS API functions that end in "FromISR".
+ *     vSetBacklightState( BACKLIGHT_ON );
+ *
+ *     // xTimerStartFromISR() or xTimerResetFromISR() could be called here
+ *     // as both cause the timer to re-calculate its expiry time.
+ *     // xHigherPriorityTaskWoken was initialised to pdFALSE when it was
+ *     // declared (in this function).
+ *     if( xTimerStartFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The start command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // Perform the rest of the key processing here.
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerStartFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START_FROM_ISR, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerStopFromISR( 	TimerHandle_t xTimer,
+ *									BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerStop() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer being stopped.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerStopFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state.  If calling xTimerStopFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerStopFromISR() function.  If
+ * xTimerStopFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the stop command could not be sent to
+ * the timer command queue.  pdPASS will be returned if the command was
+ * successfully sent to the timer command queue.  When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system.  The timer service/daemon task
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xTimer has already been created and started.  When
+ * // an interrupt occurs, the timer should be simply stopped.
+ *
+ * // The interrupt service routine that stops the timer.
+ * void vAnExampleInterruptServiceRoutine( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // The interrupt has occurred - simply stop the timer.
+ *     // xHigherPriorityTaskWoken was set to pdFALSE where it was defined
+ *     // (within this function).  As this is an interrupt service routine, only
+ *     // FreeRTOS API functions that end in "FromISR" can be used.
+ *     if( xTimerStopFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The stop command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerStopFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP_FROM_ISR, 0, ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerChangePeriodFromISR( TimerHandle_t xTimer,
+ *										 TickType_t xNewPeriod,
+ *										 BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerChangePeriod() that can be called from an interrupt
+ * service routine.
+ *
+ * @param xTimer The handle of the timer that is having its period changed.
+ *
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in
+ * tick periods, so the constant portTICK_PERIOD_MS can be used to convert a time
+ * that has been specified in milliseconds.  For example, if the timer must
+ * expire after 100 ticks, then xNewPeriod should be set to 100.  Alternatively,
+ * if the timer must expire after 500ms, then xNewPeriod can be set to
+ * ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than
+ * or equal to 1000.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerChangePeriodFromISR() writes a message to the
+ * timer command queue, so has the potential to transition the timer service/
+ * daemon task out of the Blocked state.  If calling xTimerChangePeriodFromISR()
+ * causes the timer service/daemon task to leave the Blocked state, and the
+ * timer service/daemon task has a priority equal to or greater than the
+ * currently executing task (the task that was interrupted), then
+ * *pxHigherPriorityTaskWoken will get set to pdTRUE internally within the
+ * xTimerChangePeriodFromISR() function.  If xTimerChangePeriodFromISR() sets
+ * this value to pdTRUE then a context switch should be performed before the
+ * interrupt exits.
+ *
+ * @return pdFAIL will be returned if the command to change the timers period
+ * could not be sent to the timer command queue.  pdPASS will be returned if the
+ * command was successfully sent to the timer command queue.  When the command
+ * is actually processed will depend on the priority of the timer service/daemon
+ * task relative to other tasks in the system.  The timer service/daemon task
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xTimer has already been created and started.  When
+ * // an interrupt occurs, the period of xTimer should be changed to 500ms.
+ *
+ * // The interrupt service routine that changes the period of xTimer.
+ * void vAnExampleInterruptServiceRoutine( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // The interrupt has occurred - change the period of xTimer to 500ms.
+ *     // xHigherPriorityTaskWoken was set to pdFALSE where it was defined
+ *     // (within this function).  As this is an interrupt service routine, only
+ *     // FreeRTOS API functions that end in "FromISR" can be used.
+ *     if( xTimerChangePeriodFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The command to change the timers period was not executed
+ *         // successfully.  Take appropriate action here.
+ *     }
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerChangePeriodFromISR( xTimer, xNewPeriod, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD_FROM_ISR, ( xNewPeriod ), ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerResetFromISR( 	TimerHandle_t xTimer,
+ *									BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerReset() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer that is to be started, reset, or
+ * restarted.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerResetFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state.  If calling xTimerResetFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerResetFromISR() function.  If
+ * xTimerResetFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the reset command could not be sent to
+ * the timer command queue.  pdPASS will be returned if the command was
+ * successfully sent to the timer command queue.  When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system, although the timers expiry time is
+ * relative to when xTimerResetFromISR() is actually called.  The timer service/daemon
+ * task priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xBacklightTimer has already been created.  When a
+ * // key is pressed, an LCD back-light is switched on.  If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off.  In
+ * // this case, the timer is a one-shot timer, and unlike the example given for
+ * // the xTimerReset() function, the key press event handler is an interrupt
+ * // service routine.
+ *
+ * // The callback function assigned to the one-shot timer.  In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ *     // The timer expired, therefore 5 seconds must have passed since a key
+ *     // was pressed.  Switch off the LCD back-light.
+ *     vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press interrupt service routine.
+ * void vKeyPressEventInterruptHandler( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // Ensure the LCD back-light is on, then reset the timer that is
+ *     // responsible for turning the back-light off after 5 seconds of
+ *     // key inactivity.  This is an interrupt service routine so can only
+ *     // call FreeRTOS API functions that end in "FromISR".
+ *     vSetBacklightState( BACKLIGHT_ON );
+ *
+ *     // xTimerStartFromISR() or xTimerResetFromISR() could be called here
+ *     // as both cause the timer to re-calculate its expiry time.
+ *     // xHigherPriorityTaskWoken was initialised to pdFALSE when it was
+ *     // declared (in this function).
+ *     if( xTimerResetFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The reset command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // Perform the rest of the key processing here.
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerResetFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_RESET_FROM_ISR, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )
+
+
+/**
+ * BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend,
+ *                                          void *pvParameter1,
+ *                                          uint32_t ulParameter2,
+ *                                          BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ *
+ * Used from application interrupt service routines to defer the execution of a
+ * function to the RTOS daemon task (the timer service task, hence this function
+ * is implemented in timers.c and is prefixed with 'Timer').
+ *
+ * Ideally an interrupt service routine (ISR) is kept as short as possible, but
+ * sometimes an ISR either has a lot of processing to do, or needs to perform
+ * processing that is not deterministic.  In these cases
+ * xTimerPendFunctionCallFromISR() can be used to defer processing of a function
+ * to the RTOS daemon task.
+ *
+ * A mechanism is provided that allows the interrupt to return directly to the
+ * task that will subsequently execute the pended callback function.  This
+ * allows the callback function to execute contiguously in time with the
+ * interrupt - just as if the callback had executed in the interrupt itself.
+ *
+ * @param xFunctionToPend The function to execute from the timer service/
+ * daemon task.  The function must conform to the PendedFunction_t
+ * prototype.
+ *
+ * @param pvParameter1 The value of the callback function's first parameter.
+ * The parameter has a void * type to allow it to be used to pass any type.
+ * For example, unsigned longs can be cast to a void *, or the void * can be
+ * used to point to a structure.
+ *
+ * @param ulParameter2 The value of the callback function's second parameter.
+ *
+ * @param pxHigherPriorityTaskWoken As mentioned above, calling this function
+ * will result in a message being sent to the timer daemon task.  If the
+ * priority of the timer daemon task (which is set using
+ * configTIMER_TASK_PRIORITY in FreeRTOSConfig.h) is higher than the priority of
+ * the currently running task (the task the interrupt interrupted) then
+ * *pxHigherPriorityTaskWoken will be set to pdTRUE within
+ * xTimerPendFunctionCallFromISR(), indicating that a context switch should be
+ * requested before the interrupt exits.  For that reason
+ * *pxHigherPriorityTaskWoken must be initialised to pdFALSE.  See the
+ * example code below.
+ *
+ * @return pdPASS is returned if the message was successfully sent to the
+ * timer daemon task, otherwise pdFALSE is returned.
+ *
+ * Example usage:
+ * @verbatim
+ *
+ *	// The callback function that will execute in the context of the daemon task.
+ *  // Note callback functions must all use this same prototype.
+ *  void vProcessInterface( void *pvParameter1, uint32_t ulParameter2 )
+ *	{
+ *		BaseType_t xInterfaceToService;
+ *
+ *		// The interface that requires servicing is passed in the second
+ *      // parameter.  The first parameter is not used in this case.
+ *		xInterfaceToService = ( BaseType_t ) ulParameter2;
+ *
+ *		// ...Perform the processing here...
+ *	}
+ *
+ *	// An ISR that receives data packets from multiple interfaces
+ *  void vAnISR( void )
+ *	{
+ *		BaseType_t xInterfaceToService, xHigherPriorityTaskWoken;
+ *
+ *		// Query the hardware to determine which interface needs processing.
+ *		xInterfaceToService = prvCheckInterfaces();
+ *
+ *      // The actual processing is to be deferred to a task.  Request the
+ *      // vProcessInterface() callback function is executed, passing in the
+ *		// number of the interface that needs processing.  The interface to
+ *		// service is passed in the second parameter.  The first parameter is
+ *		// not used in this case.
+ *		xHigherPriorityTaskWoken = pdFALSE;
+ *		xTimerPendFunctionCallFromISR( vProcessInterface, NULL, ( uint32_t ) xInterfaceToService, &xHigherPriorityTaskWoken );
+ *
+ *		// If xHigherPriorityTaskWoken is now set to pdTRUE then a context
+ *		// switch should be requested.  The macro used is port specific and will
+ *		// be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() - refer to
+ *		// the documentation page for the port being used.
+ *		portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+ *
+ *	}
+ * @endverbatim
+ */
+BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+ /**
+  * BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend,
+  *                                    void *pvParameter1,
+  *                                    uint32_t ulParameter2,
+  *                                    TickType_t xTicksToWait );
+  *
+  *
+  * Used to defer the execution of a function to the RTOS daemon task (the timer
+  * service task, hence this function is implemented in timers.c and is prefixed
+  * with 'Timer').
+  *
+  * @param xFunctionToPend The function to execute from the timer service/
+  * daemon task.  The function must conform to the PendedFunction_t
+  * prototype.
+  *
+  * @param pvParameter1 The value of the callback function's first parameter.
+  * The parameter has a void * type to allow it to be used to pass any type.
+  * For example, unsigned longs can be cast to a void *, or the void * can be
+  * used to point to a structure.
+  *
+  * @param ulParameter2 The value of the callback function's second parameter.
+  *
+  * @param xTicksToWait Calling this function will result in a message being
+  * sent to the timer daemon task on a queue.  xTicksToWait is the amount of
+  * time the calling task should remain in the Blocked state (so not using any
+  * processing time) for space to become available on the timer queue if the
+  * queue is found to be full.
+  *
+  * @return pdPASS is returned if the message was successfully sent to the
+  * timer daemon task, otherwise pdFALSE is returned.
+  *
+  */
+BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * const char * const pcTimerGetName( TimerHandle_t xTimer );
+ *
+ * Returns the name that was assigned to a timer when the timer was created.
+ *
+ * @param xTimer The handle of the timer being queried.
+ *
+ * @return The name assigned to the timer specified by the xTimer parameter.
+ */
+const char * pcTimerGetName( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * void vTimerSetReloadMode( TimerHandle_t xTimer, const UBaseType_t uxAutoReload );
+ *
+ * Updates a timer to be either an auto-reload timer, in which case the timer
+ * automatically resets itself each time it expires, or a one-shot timer, in
+ * which case the timer will only expire once unless it is manually restarted.
+ *
+ * @param xTimer The handle of the timer being updated.
+ *
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will
+ * expire repeatedly with a frequency set by the timer's period (see the
+ * xTimerPeriodInTicks parameter of the xTimerCreate() API function).  If
+ * uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and
+ * enter the dormant state after it expires.
+ */
+void vTimerSetReloadMode( TimerHandle_t xTimer, const UBaseType_t uxAutoReload ) PRIVILEGED_FUNCTION;
+
+/**
+* UBaseType_t uxTimerGetReloadMode( TimerHandle_t xTimer );
+*
+* Queries a timer to determine if it is an auto-reload timer, in which case the timer
+* automatically resets itself each time it expires, or a one-shot timer, in
+* which case the timer will only expire once unless it is manually restarted.
+*
+* @param xTimer The handle of the timer being queried.
+*
+* @return If the timer is an auto-reload timer then pdTRUE is returned, otherwise
+* pdFALSE is returned.
+*/
+UBaseType_t uxTimerGetReloadMode( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+ * TickType_t xTimerGetPeriod( TimerHandle_t xTimer );
+ *
+ * Returns the period of a timer.
+ *
+ * @param xTimer The handle of the timer being queried.
+ *
+ * @return The period of the timer in ticks.
+ */
+TickType_t xTimerGetPeriod( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+* TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer );
+*
+* Returns the time in ticks at which the timer will expire.  If this is less
+* than the current tick count then the expiry time has overflowed from the
+* current time.
+*
+* @param xTimer The handle of the timer being queried.
+*
+* @return If the timer is running then the time in ticks at which the timer
+* will next expire is returned.  If the timer is not running then the return
+* value is undefined.
+*/
+TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/*
+ * Functions beyond this part are not part of the public API and are intended
+ * for use by the kernel only.
+ */
+BaseType_t xTimerCreateTimerTask( void ) PRIVILEGED_FUNCTION;
+BaseType_t xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+#if( configUSE_TRACE_FACILITY == 1 )
+	void vTimerSetTimerNumber( TimerHandle_t xTimer, UBaseType_t uxTimerNumber ) PRIVILEGED_FUNCTION;
+	UBaseType_t uxTimerGetTimerNumber( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* TIMERS_H */
+
+
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/list.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/list.c
new file mode 100644
index 0000000..0e0e72d
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/list.c
@@ -0,0 +1,198 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#include 
+#include "FreeRTOS.h"
+#include "list.h"
+
+/*-----------------------------------------------------------
+ * PUBLIC LIST API documented in list.h
+ *----------------------------------------------------------*/
+
+void vListInitialise( List_t * const pxList )
+{
+	/* The list structure contains a list item which is used to mark the
+	end of the list.  To initialise the list the list end is inserted
+	as the only list entry. */
+	pxList->pxIndex = ( ListItem_t * ) &( pxList->xListEnd );			/*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM.  This is checked and valid. */
+
+	/* The list end value is the highest possible value in the list to
+	ensure it remains at the end of the list. */
+	pxList->xListEnd.xItemValue = portMAX_DELAY;
+
+	/* The list end next and previous pointers point to itself so we know
+	when the list is empty. */
+	pxList->xListEnd.pxNext = ( ListItem_t * ) &( pxList->xListEnd );	/*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM.  This is checked and valid. */
+	pxList->xListEnd.pxPrevious = ( ListItem_t * ) &( pxList->xListEnd );/*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM.  This is checked and valid. */
+
+	pxList->uxNumberOfItems = ( UBaseType_t ) 0U;
+
+	/* Write known values into the list if
+	configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+	listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList );
+	listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList );
+}
+/*-----------------------------------------------------------*/
+
+void vListInitialiseItem( ListItem_t * const pxItem )
+{
+	/* Make sure the list item is not recorded as being on a list. */
+	pxItem->pxContainer = NULL;
+
+	/* Write known values into the list item if
+	configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+	listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
+	listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
+}
+/*-----------------------------------------------------------*/
+
+void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem )
+{
+ListItem_t * const pxIndex = pxList->pxIndex;
+
+	/* Only effective when configASSERT() is also defined, these tests may catch
+	the list data structures being overwritten in memory.  They will not catch
+	data errors caused by incorrect configuration or use of FreeRTOS. */
+	listTEST_LIST_INTEGRITY( pxList );
+	listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
+
+	/* Insert a new list item into pxList, but rather than sort the list,
+	makes the new list item the last item to be removed by a call to
+	listGET_OWNER_OF_NEXT_ENTRY(). */
+	pxNewListItem->pxNext = pxIndex;
+	pxNewListItem->pxPrevious = pxIndex->pxPrevious;
+
+	/* Only used during decision coverage testing. */
+	mtCOVERAGE_TEST_DELAY();
+
+	pxIndex->pxPrevious->pxNext = pxNewListItem;
+	pxIndex->pxPrevious = pxNewListItem;
+
+	/* Remember which list the item is in. */
+	pxNewListItem->pxContainer = pxList;
+
+	( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem )
+{
+ListItem_t *pxIterator;
+const TickType_t xValueOfInsertion = pxNewListItem->xItemValue;
+
+	/* Only effective when configASSERT() is also defined, these tests may catch
+	the list data structures being overwritten in memory.  They will not catch
+	data errors caused by incorrect configuration or use of FreeRTOS. */
+	listTEST_LIST_INTEGRITY( pxList );
+	listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
+
+	/* Insert the new list item into the list, sorted in xItemValue order.
+
+	If the list already contains a list item with the same item value then the
+	new list item should be placed after it.  This ensures that TCBs which are
+	stored in ready lists (all of which have the same xItemValue value) get a
+	share of the CPU.  However, if the xItemValue is the same as the back marker
+	the iteration loop below will not end.  Therefore the value is checked
+	first, and the algorithm slightly modified if necessary. */
+	if( xValueOfInsertion == portMAX_DELAY )
+	{
+		pxIterator = pxList->xListEnd.pxPrevious;
+	}
+	else
+	{
+		/* *** NOTE ***********************************************************
+		If you find your application is crashing here then likely causes are
+		listed below.  In addition see https://www.freertos.org/FAQHelp.html for
+		more tips, and ensure configASSERT() is defined!
+		https://www.freertos.org/a00110.html#configASSERT
+
+			1) Stack overflow -
+			   see https://www.freertos.org/Stacks-and-stack-overflow-checking.html
+			2) Incorrect interrupt priority assignment, especially on Cortex-M
+			   parts where numerically high priority values denote low actual
+			   interrupt priorities, which can seem counter intuitive.  See
+			   https://www.freertos.org/RTOS-Cortex-M3-M4.html and the definition
+			   of configMAX_SYSCALL_INTERRUPT_PRIORITY on
+			   https://www.freertos.org/a00110.html
+			3) Calling an API function from within a critical section or when
+			   the scheduler is suspended, or calling an API function that does
+			   not end in "FromISR" from an interrupt.
+			4) Using a queue or semaphore before it has been initialised or
+			   before the scheduler has been started (are interrupts firing
+			   before vTaskStartScheduler() has been called?).
+		**********************************************************************/
+
+		for( pxIterator = ( ListItem_t * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext ) /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM.  This is checked and valid. *//*lint !e440 The iterator moves to a different value, not xValueOfInsertion. */
+		{
+			/* There is nothing to do here, just iterating to the wanted
+			insertion position. */
+		}
+	}
+
+	pxNewListItem->pxNext = pxIterator->pxNext;
+	pxNewListItem->pxNext->pxPrevious = pxNewListItem;
+	pxNewListItem->pxPrevious = pxIterator;
+	pxIterator->pxNext = pxNewListItem;
+
+	/* Remember which list the item is in.  This allows fast removal of the
+	item later. */
+	pxNewListItem->pxContainer = pxList;
+
+	( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove )
+{
+/* The list item knows which list it is in.  Obtain the list from the list
+item. */
+List_t * const pxList = pxItemToRemove->pxContainer;
+
+	pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;
+	pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;
+
+	/* Only used during decision coverage testing. */
+	mtCOVERAGE_TEST_DELAY();
+
+	/* Make sure the index is left pointing to a valid item. */
+	if( pxList->pxIndex == pxItemToRemove )
+	{
+		pxList->pxIndex = pxItemToRemove->pxPrevious;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	pxItemToRemove->pxContainer = NULL;
+	( pxList->uxNumberOfItems )--;
+
+	return pxList->uxNumberOfItems;
+}
+/*-----------------------------------------------------------*/
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c
new file mode 100644
index 0000000..2b32b20
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c
@@ -0,0 +1,560 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM0 port.
+ *----------------------------------------------------------*/
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* Constants required to manipulate the NVIC. */
+#define portNVIC_SYSTICK_CTRL_REG			( * ( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG			( * ( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG	( * ( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_INT_CTRL_REG				( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_SYSPRI2_REG				( * ( ( volatile uint32_t * ) 0xe000ed20 ) )
+#define portNVIC_SYSTICK_CLK_BIT			( 1UL << 2UL )
+#define portNVIC_SYSTICK_INT_BIT			( 1UL << 1UL )
+#define portNVIC_SYSTICK_ENABLE_BIT			( 1UL << 0UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT		( 1UL << 16UL )
+#define portNVIC_PENDSVSET_BIT				( 1UL << 28UL )
+#define portMIN_INTERRUPT_PRIORITY		( 255UL )
+#define portNVIC_PENDSV_PRI				( portMIN_INTERRUPT_PRIORITY << 16UL )
+#define portNVIC_SYSTICK_PRI			( portMIN_INTERRUPT_PRIORITY << 24UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR			( 0x01000000 )
+
+/* The systick is a 24-bit counter. */
+#define portMAX_24_BIT_NUMBER				( 0xffffffUL )
+
+/* A fiddle factor to estimate the number of SysTick counts that would have
+occurred while the SysTick counter is stopped during tickless idle
+calculations. */
+#ifndef portMISSED_COUNTS_FACTOR
+	#define portMISSED_COUNTS_FACTOR			( 45UL )
+#endif
+
+/* Let the user override the pre-loading of the initial LR with the address of
+prvTaskExitError() in case it messes up unwinding of the stack in the
+debugger. */
+#ifdef configTASK_RETURN_ADDRESS
+	#define portTASK_RETURN_ADDRESS	configTASK_RETURN_ADDRESS
+#else
+	#define portTASK_RETURN_ADDRESS	prvTaskExitError
+#endif
+
+/*
+ * Setup the timer to generate the tick interrupts.  The implementation in this
+ * file is weak to allow application writers to change the timer used to
+ * generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+void xPortPendSVHandler( void ) __attribute__ (( naked ));
+void xPortSysTickHandler( void );
+void vPortSVCHandler( void );
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void vPortStartFirstTask( void ) __attribute__ (( naked ));
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable. */
+static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
+
+/*-----------------------------------------------------------*/
+
+/*
+* The number of SysTick increments that make up one tick period.
+*/
+#if( configUSE_TICKLESS_IDLE == 1 )
+	static uint32_t ulTimerCountsForOneTick = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * The maximum number of tick periods that can be suppressed is limited by the
+ * 24 bit resolution of the SysTick timer.
+ */
+#if( configUSE_TICKLESS_IDLE == 1 )
+	static uint32_t xMaximumPossibleSuppressedTicks = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Compensate for the CPU cycles that pass while the SysTick is stopped (low
+ * power functionality only.
+ */
+#if( configUSE_TICKLESS_IDLE == 1 )
+	static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+	/* Simulate the stack frame as it would be created by a context switch
+	interrupt. */
+	pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+	*pxTopOfStack = portINITIAL_XPSR;	/* xPSR */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) pxCode;	/* PC */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS;	/* LR */
+	pxTopOfStack -= 5;	/* R12, R3, R2 and R1. */
+	*pxTopOfStack = ( StackType_t ) pvParameters;	/* R0 */
+	pxTopOfStack -= 8; /* R11..R4. */
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+volatile uint32_t ulDummy = 0UL;
+
+	/* A function that implements a task must not exit or attempt to return to
+	its caller as there is nothing to return to.  If a task wants to exit it
+	should instead call vTaskDelete( NULL ).
+
+	Artificially force an assert() to be triggered if configASSERT() is
+	defined, then stop here so application writers can catch the error. */
+	configASSERT( uxCriticalNesting == ~0UL );
+	portDISABLE_INTERRUPTS();
+	while( ulDummy == 0 )
+	{
+		/* This file calls prvTaskExitError() after the scheduler has been
+		started to remove a compiler warning about the function being defined
+		but never called.  ulDummy is used purely to quieten other warnings
+		about code appearing after this function is called - making ulDummy
+		volatile makes the compiler think the function could return and
+		therefore not output an 'unreachable code' warning for code that appears
+		after it. */
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vPortSVCHandler( void )
+{
+	/* This function is no longer used, but retained for backward
+	compatibility. */
+}
+/*-----------------------------------------------------------*/
+
+void vPortStartFirstTask( void )
+{
+	/* The MSP stack is not reset as, unlike on M3/4 parts, there is no vector
+	table offset register that can be used to locate the initial stack value.
+	Not all M0 parts have the application vector table at address 0. */
+	__asm volatile(
+	"	.syntax unified				\n"
+	"	ldr  r2, pxCurrentTCBConst2	\n" /* Obtain location of pxCurrentTCB. */
+	"	ldr  r3, [r2]				\n"
+	"	ldr  r0, [r3]				\n" /* The first item in pxCurrentTCB is the task top of stack. */
+	"	adds r0, #32					\n" /* Discard everything up to r0. */
+	"	msr  psp, r0					\n" /* This is now the new top of stack to use in the task. */
+	"	movs r0, #2					\n" /* Switch to the psp stack. */
+	"	msr  CONTROL, r0				\n"
+	"	isb							\n"
+	"	pop  {r0-r5}					\n" /* Pop the registers that are saved automatically. */
+	"	mov  lr, r5					\n" /* lr is now in r5. */
+	"	pop  {r3}					\n" /* Return address is now in r3. */
+	"	pop  {r2}					\n" /* Pop and discard XPSR. */
+	"	cpsie i						\n" /* The first task has its context and interrupts can be enabled. */
+	"	bx   r3						\n" /* Finally, jump to the user defined task code. */
+	"								\n"
+	"	.align 4					\n"
+	"pxCurrentTCBConst2: .word pxCurrentTCB	  "
+				  );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+	/* Make PendSV, CallSV and SysTick the same priority as the kernel. */
+	portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI;
+	portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI;
+
+	/* Start the timer that generates the tick ISR.  Interrupts are disabled
+	here already. */
+	vPortSetupTimerInterrupt();
+
+	/* Initialise the critical nesting count ready for the first task. */
+	uxCriticalNesting = 0;
+
+	/* Start the first task. */
+	vPortStartFirstTask();
+
+	/* Should never get here as the tasks will now be executing!  Call the task
+	exit error function to prevent compiler warnings about a static function
+	not being called in the case that the application writer overrides this
+	functionality by defining configTASK_RETURN_ADDRESS.  Call
+	vTaskSwitchContext() so link time optimisation does not remove the
+	symbol. */
+	vTaskSwitchContext();
+	prvTaskExitError();
+
+	/* Should not get here! */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+	/* Not implemented in ports where there is nothing to return to.
+	Artificially force an assert. */
+	configASSERT( uxCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortYield( void )
+{
+	/* Set a PendSV to request a context switch. */
+	portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+
+	/* Barriers are normally not required but do ensure the code is completely
+	within the specified behaviour for the architecture. */
+	__asm volatile( "dsb" ::: "memory" );
+	__asm volatile( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+	portDISABLE_INTERRUPTS();
+	uxCriticalNesting++;
+	__asm volatile( "dsb" ::: "memory" );
+	__asm volatile( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+	configASSERT( uxCriticalNesting );
+	uxCriticalNesting--;
+	if( uxCriticalNesting == 0 )
+	{
+		portENABLE_INTERRUPTS();
+	}
+}
+/*-----------------------------------------------------------*/
+
+uint32_t ulSetInterruptMaskFromISR( void )
+{
+	__asm volatile(
+					" mrs r0, PRIMASK	\n"
+					" cpsid i			\n"
+					" bx lr				  "
+					::: "memory"
+				  );
+}
+/*-----------------------------------------------------------*/
+
+void vClearInterruptMaskFromISR( __attribute__( ( unused ) ) uint32_t ulMask )
+{
+	__asm volatile(
+					" msr PRIMASK, r0	\n"
+					" bx lr				  "
+					::: "memory"
+				  );
+}
+/*-----------------------------------------------------------*/
+
+void xPortPendSVHandler( void )
+{
+	/* This is a naked function. */
+
+	__asm volatile
+	(
+	"	.syntax unified						\n"
+	"	mrs r0, psp							\n"
+	"										\n"
+	"	ldr	r3, pxCurrentTCBConst			\n" /* Get the location of the current TCB. */
+	"	ldr	r2, [r3]						\n"
+	"										\n"
+	"	subs r0, r0, #32					\n" /* Make space for the remaining low registers. */
+	"	str r0, [r2]						\n" /* Save the new top of stack. */
+	"	stmia r0!, {r4-r7}					\n" /* Store the low registers that are not saved automatically. */
+	" 	mov r4, r8							\n" /* Store the high registers. */
+	" 	mov r5, r9							\n"
+	" 	mov r6, r10							\n"
+	" 	mov r7, r11							\n"
+	" 	stmia r0!, {r4-r7}					\n"
+	"										\n"
+	"	push {r3, r14}						\n"
+	"	cpsid i								\n"
+	"	bl vTaskSwitchContext				\n"
+	"	cpsie i								\n"
+	"	pop {r2, r3}						\n" /* lr goes in r3. r2 now holds tcb pointer. */
+	"										\n"
+	"	ldr r1, [r2]						\n"
+	"	ldr r0, [r1]						\n" /* The first item in pxCurrentTCB is the task top of stack. */
+	"	adds r0, r0, #16					\n" /* Move to the high registers. */
+	"	ldmia r0!, {r4-r7}					\n" /* Pop the high registers. */
+	" 	mov r8, r4							\n"
+	" 	mov r9, r5							\n"
+	" 	mov r10, r6							\n"
+	" 	mov r11, r7							\n"
+	"										\n"
+	"	msr psp, r0							\n" /* Remember the new top of stack for the task. */
+	"										\n"
+	"	subs r0, r0, #32					\n" /* Go back for the low registers that are not automatically restored. */
+	" 	ldmia r0!, {r4-r7}					\n" /* Pop low registers.  */
+	"										\n"
+	"	bx r3								\n"
+	"										\n"
+	"	.align 4							\n"
+	"pxCurrentTCBConst: .word pxCurrentTCB	  "
+	);
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+uint32_t ulPreviousMask;
+
+	ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		/* Increment the RTOS tick. */
+		if( xTaskIncrementTick() != pdFALSE )
+		{
+			/* Pend a context switch. */
+			portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the systick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+__attribute__(( weak )) void vPortSetupTimerInterrupt( void )
+{
+	/* Calculate the constants required to configure the tick interrupt. */
+	#if( configUSE_TICKLESS_IDLE == 1 )
+	{
+		ulTimerCountsForOneTick = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ );
+		xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+		ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR;
+	}
+	#endif /* configUSE_TICKLESS_IDLE */
+
+	/* Stop and reset the SysTick. */
+	portNVIC_SYSTICK_CTRL_REG = 0UL;
+	portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+	/* Configure SysTick to interrupt at the requested rate. */
+	portNVIC_SYSTICK_LOAD_REG = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+	portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT;
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TICKLESS_IDLE == 1 )
+
+	__attribute__((weak)) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+	{
+	uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements;
+	TickType_t xModifiableIdleTime;
+
+		/* Make sure the SysTick reload value does not overflow the counter. */
+		if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+		{
+			xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+		}
+
+		/* Stop the SysTick momentarily.  The time the SysTick is stopped for
+		is accounted for as best it can be, but using the tickless mode will
+		inevitably result in some tiny drift of the time maintained by the
+		kernel with respect to calendar time. */
+		portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+		/* Calculate the reload value required to wait xExpectedIdleTime
+		tick periods.  -1 is used because this code will execute part way
+		through one of the tick periods. */
+		ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+		if( ulReloadValue > ulStoppedTimerCompensation )
+		{
+			ulReloadValue -= ulStoppedTimerCompensation;
+		}
+
+		/* Enter a critical section but don't use the taskENTER_CRITICAL()
+		method as that will mask interrupts that should exit sleep mode. */
+		__asm volatile( "cpsid i" ::: "memory" );
+		__asm volatile( "dsb" );
+		__asm volatile( "isb" );
+
+		/* If a context switch is pending or a task is waiting for the scheduler
+		to be unsuspended then abandon the low power entry. */
+		if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+		{
+			/* Restart from whatever is left in the count register to complete
+			this tick period. */
+			portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Reset the reload register to the value required for normal tick
+			periods. */
+			portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+			/* Re-enable interrupts - see comments above the cpsid instruction()
+			above. */
+			__asm volatile( "cpsie i" ::: "memory" );
+		}
+		else
+		{
+			/* Set the new reload value. */
+			portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+			/* Clear the SysTick count flag and set the count value back to
+			zero. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Sleep until something happens.  configPRE_SLEEP_PROCESSING() can
+			set its parameter to 0 to indicate that its implementation contains
+			its own wait for interrupt or wait for event instruction, and so wfi
+			should not be executed again.  However, the original expected idle
+			time variable must remain unmodified, so a copy is taken. */
+			xModifiableIdleTime = xExpectedIdleTime;
+			configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+			if( xModifiableIdleTime > 0 )
+			{
+				__asm volatile( "dsb" ::: "memory" );
+				__asm volatile( "wfi" );
+				__asm volatile( "isb" );
+			}
+			configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+			/* Re-enable interrupts to allow the interrupt that brought the MCU
+			out of sleep mode to execute immediately.  see comments above
+			__disable_interrupt() call above. */
+			__asm volatile( "cpsie i" ::: "memory" );
+			__asm volatile( "dsb" );
+			__asm volatile( "isb" );
+
+			/* Disable interrupts again because the clock is about to be stopped
+			and interrupts that execute while the clock is stopped will increase
+			any slippage between the time maintained by the RTOS and calendar
+			time. */
+			__asm volatile( "cpsid i" ::: "memory" );
+			__asm volatile( "dsb" );
+			__asm volatile( "isb" );
+
+			/* Disable the SysTick clock without reading the
+			portNVIC_SYSTICK_CTRL_REG register to ensure the
+			portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set.  Again,
+			the time the SysTick is stopped for is accounted for as best it can
+			be, but using the tickless mode will inevitably result in some tiny
+			drift of the time maintained by the kernel with respect to calendar
+			time*/
+			portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT );
+
+			/* Determine if the SysTick clock has already counted to zero and
+			been set back to the current reload value (the reload back being
+			correct for the entire expected idle time) or if the SysTick is yet
+			to count to zero (in which case an interrupt other than the SysTick
+			must have brought the system out of sleep mode). */
+			if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+			{
+				uint32_t ulCalculatedLoadValue;
+
+				/* The tick interrupt is already pending, and the SysTick count
+				reloaded with ulReloadValue.  Reset the
+				portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+				period. */
+				ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+				/* Don't allow a tiny value, or values that have somehow
+				underflowed because the post sleep hook did something
+				that took too long. */
+				if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+				{
+					ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+				}
+
+				portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+				/* As the pending tick will be processed as soon as this
+				function exits, the tick value maintained by the tick is stepped
+				forward by one less than the time spent waiting. */
+				ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+			}
+			else
+			{
+				/* Something other than the tick interrupt ended the sleep.
+				Work out how long the sleep lasted rounded to complete tick
+				periods (not the ulReload value which accounted for part
+				ticks). */
+				ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+				/* How many complete tick periods passed while the processor
+				was waiting? */
+				ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+				/* The reload value is set to whatever fraction of a single tick
+				period remains. */
+				portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+			}
+
+			/* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+			again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+			value. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+			vTaskStepTick( ulCompleteTickPeriods );
+			portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+			/* Exit with interrpts enabled. */
+			__asm volatile( "cpsie i" ::: "memory" );
+		}
+	}
+
+#endif /* configUSE_TICKLESS_IDLE */
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/portmacro.h b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/portmacro.h
new file mode 100644
index 0000000..3b402b4
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/portmacro.h
@@ -0,0 +1,124 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+	not need to be guarded with a critical section. */
+	#define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+/*-----------------------------------------------------------*/
+
+
+/* Scheduler utilities. */
+extern void vPortYield( void );
+#define portNVIC_INT_CTRL_REG		( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT		( 1UL << 28UL )
+#define portYIELD()					vPortYield()
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+extern uint32_t ulSetInterruptMaskFromISR( void ) __attribute__((naked));
+extern void vClearInterruptMaskFromISR( uint32_t ulMask )  __attribute__((naked));
+
+#define portSET_INTERRUPT_MASK_FROM_ISR()		ulSetInterruptMaskFromISR()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x)	vClearInterruptMaskFromISR( x )
+#define portDISABLE_INTERRUPTS()				__asm volatile 	( " cpsid i " ::: "memory" )
+#define portENABLE_INTERRUPTS()					__asm volatile 	( " cpsie i " ::: "memory" )
+#define portENTER_CRITICAL()					vPortEnterCritical()
+#define portEXIT_CRITICAL()						vPortExitCritical()
+
+/*-----------------------------------------------------------*/
+
+/* Tickless idle/low power functionality. */
+#ifndef portSUPPRESS_TICKS_AND_SLEEP
+	extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+	#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
+#endif
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+
+#define portNOP()
+
+#define portMEMORY_BARRIER() __asm volatile( "" ::: "memory" )
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c
new file mode 100644
index 0000000..a266144
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c
@@ -0,0 +1,492 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/*
+ * A sample implementation of pvPortMalloc() and vPortFree() that combines
+ * (coalescences) adjacent memory blocks as they are freed, and in so doing
+ * limits memory fragmentation.
+ *
+ * See heap_1.c, heap_2.c and heap_3.c for alternative implementations, and the
+ * memory management pages of http://www.FreeRTOS.org for more information.
+ */
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
+	#error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
+#endif
+
+/* Block sizes must not get too small. */
+#define heapMINIMUM_BLOCK_SIZE	( ( size_t ) ( xHeapStructSize << 1 ) )
+
+/* Assumes 8bit bytes! */
+#define heapBITS_PER_BYTE		( ( size_t ) 8 )
+
+/* Allocate the memory for the heap. */
+#if( configAPPLICATION_ALLOCATED_HEAP == 1 )
+	/* The application writer has already defined the array used for the RTOS
+	heap - probably so it can be placed in a special segment or address. */
+	extern uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#else
+	static uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#endif /* configAPPLICATION_ALLOCATED_HEAP */
+
+/* Define the linked list structure.  This is used to link free blocks in order
+of their memory address. */
+typedef struct A_BLOCK_LINK
+{
+	struct A_BLOCK_LINK *pxNextFreeBlock;	/*<< The next free block in the list. */
+	size_t xBlockSize;						/*<< The size of the free block. */
+} BlockLink_t;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Inserts a block of memory that is being freed into the correct position in
+ * the list of free memory blocks.  The block being freed will be merged with
+ * the block in front it and/or the block behind it if the memory blocks are
+ * adjacent to each other.
+ */
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert );
+
+/*
+ * Called automatically to setup the required heap structures the first time
+ * pvPortMalloc() is called.
+ */
+static void prvHeapInit( void );
+
+/*-----------------------------------------------------------*/
+
+/* The size of the structure placed at the beginning of each allocated memory
+block must by correctly byte aligned. */
+static const size_t xHeapStructSize	= ( sizeof( BlockLink_t ) + ( ( size_t ) ( portBYTE_ALIGNMENT - 1 ) ) ) & ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+
+/* Create a couple of list links to mark the start and end of the list. */
+static BlockLink_t xStart, *pxEnd = NULL;
+
+/* Keeps track of the number of calls to allocate and free memory as well as the
+number of free bytes remaining, but says nothing about fragmentation. */
+static size_t xFreeBytesRemaining = 0U;
+static size_t xMinimumEverFreeBytesRemaining = 0U;
+static size_t xNumberOfSuccessfulAllocations = 0;
+static size_t xNumberOfSuccessfulFrees = 0;
+
+/* Gets set to the top bit of an size_t type.  When this bit in the xBlockSize
+member of an BlockLink_t structure is set then the block belongs to the
+application.  When the bit is free the block is still part of the free heap
+space. */
+static size_t xBlockAllocatedBit = 0;
+
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
+void *pvReturn = NULL;
+
+	vTaskSuspendAll();
+	{
+		/* If this is the first call to malloc then the heap will require
+		initialisation to setup the list of free blocks. */
+		if( pxEnd == NULL )
+		{
+			prvHeapInit();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		/* Check the requested block size is not so large that the top bit is
+		set.  The top bit of the block size member of the BlockLink_t structure
+		is used to determine who owns the block - the application or the
+		kernel, so it must be free. */
+		if( ( xWantedSize & xBlockAllocatedBit ) == 0 )
+		{
+			/* The wanted size is increased so it can contain a BlockLink_t
+			structure in addition to the requested amount of bytes. */
+			if( xWantedSize > 0 )
+			{
+				xWantedSize += xHeapStructSize;
+
+				/* Ensure that blocks are always aligned to the required number
+				of bytes. */
+				if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0x00 )
+				{
+					/* Byte alignment required. */
+					xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
+					configASSERT( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) == 0 );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			if( ( xWantedSize > 0 ) && ( xWantedSize <= xFreeBytesRemaining ) )
+			{
+				/* Traverse the list from the start	(lowest address) block until
+				one	of adequate size is found. */
+				pxPreviousBlock = &xStart;
+				pxBlock = xStart.pxNextFreeBlock;
+				while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
+				{
+					pxPreviousBlock = pxBlock;
+					pxBlock = pxBlock->pxNextFreeBlock;
+				}
+
+				/* If the end marker was reached then a block of adequate size
+				was	not found. */
+				if( pxBlock != pxEnd )
+				{
+					/* Return the memory space pointed to - jumping over the
+					BlockLink_t structure at its start. */
+					pvReturn = ( void * ) ( ( ( uint8_t * ) pxPreviousBlock->pxNextFreeBlock ) + xHeapStructSize );
+
+					/* This block is being returned for use so must be taken out
+					of the list of free blocks. */
+					pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
+
+					/* If the block is larger than required it can be split into
+					two. */
+					if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
+					{
+						/* This block is to be split into two.  Create a new
+						block following the number of bytes requested. The void
+						cast is used to prevent byte alignment warnings from the
+						compiler. */
+						pxNewBlockLink = ( void * ) ( ( ( uint8_t * ) pxBlock ) + xWantedSize );
+						configASSERT( ( ( ( size_t ) pxNewBlockLink ) & portBYTE_ALIGNMENT_MASK ) == 0 );
+
+						/* Calculate the sizes of two blocks split from the
+						single block. */
+						pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
+						pxBlock->xBlockSize = xWantedSize;
+
+						/* Insert the new block into the list of free blocks. */
+						prvInsertBlockIntoFreeList( pxNewBlockLink );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					xFreeBytesRemaining -= pxBlock->xBlockSize;
+
+					if( xFreeBytesRemaining < xMinimumEverFreeBytesRemaining )
+					{
+						xMinimumEverFreeBytesRemaining = xFreeBytesRemaining;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* The block is being returned - it is allocated and owned
+					by the application and has no "next" block. */
+					pxBlock->xBlockSize |= xBlockAllocatedBit;
+					pxBlock->pxNextFreeBlock = NULL;
+					xNumberOfSuccessfulAllocations++;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		traceMALLOC( pvReturn, xWantedSize );
+	}
+	( void ) xTaskResumeAll();
+
+	#if( configUSE_MALLOC_FAILED_HOOK == 1 )
+	{
+		if( pvReturn == NULL )
+		{
+			extern void vApplicationMallocFailedHook( void );
+			vApplicationMallocFailedHook();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#endif
+
+	configASSERT( ( ( ( size_t ) pvReturn ) & ( size_t ) portBYTE_ALIGNMENT_MASK ) == 0 );
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+uint8_t *puc = ( uint8_t * ) pv;
+BlockLink_t *pxLink;
+
+	if( pv != NULL )
+	{
+		/* The memory being freed will have an BlockLink_t structure immediately
+		before it. */
+		puc -= xHeapStructSize;
+
+		/* This casting is to keep the compiler from issuing warnings. */
+		pxLink = ( void * ) puc;
+
+		/* Check the block is actually allocated. */
+		configASSERT( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 );
+		configASSERT( pxLink->pxNextFreeBlock == NULL );
+
+		if( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 )
+		{
+			if( pxLink->pxNextFreeBlock == NULL )
+			{
+				/* The block is being returned to the heap - it is no longer
+				allocated. */
+				pxLink->xBlockSize &= ~xBlockAllocatedBit;
+
+				vTaskSuspendAll();
+				{
+					/* Add this block to the list of free blocks. */
+					xFreeBytesRemaining += pxLink->xBlockSize;
+					traceFREE( pv, pxLink->xBlockSize );
+					prvInsertBlockIntoFreeList( ( ( BlockLink_t * ) pxLink ) );
+					xNumberOfSuccessfulFrees++;
+				}
+				( void ) xTaskResumeAll();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetFreeHeapSize( void )
+{
+	return xFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetMinimumEverFreeHeapSize( void )
+{
+	return xMinimumEverFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+void vPortInitialiseBlocks( void )
+{
+	/* This just exists to keep the linker quiet. */
+}
+/*-----------------------------------------------------------*/
+
+static void prvHeapInit( void )
+{
+BlockLink_t *pxFirstFreeBlock;
+uint8_t *pucAlignedHeap;
+size_t uxAddress;
+size_t xTotalHeapSize = configTOTAL_HEAP_SIZE;
+
+	/* Ensure the heap starts on a correctly aligned boundary. */
+	uxAddress = ( size_t ) ucHeap;
+
+	if( ( uxAddress & portBYTE_ALIGNMENT_MASK ) != 0 )
+	{
+		uxAddress += ( portBYTE_ALIGNMENT - 1 );
+		uxAddress &= ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+		xTotalHeapSize -= uxAddress - ( size_t ) ucHeap;
+	}
+
+	pucAlignedHeap = ( uint8_t * ) uxAddress;
+
+	/* xStart is used to hold a pointer to the first item in the list of free
+	blocks.  The void cast is used to prevent compiler warnings. */
+	xStart.pxNextFreeBlock = ( void * ) pucAlignedHeap;
+	xStart.xBlockSize = ( size_t ) 0;
+
+	/* pxEnd is used to mark the end of the list of free blocks and is inserted
+	at the end of the heap space. */
+	uxAddress = ( ( size_t ) pucAlignedHeap ) + xTotalHeapSize;
+	uxAddress -= xHeapStructSize;
+	uxAddress &= ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+	pxEnd = ( void * ) uxAddress;
+	pxEnd->xBlockSize = 0;
+	pxEnd->pxNextFreeBlock = NULL;
+
+	/* To start with there is a single free block that is sized to take up the
+	entire heap space, minus the space taken by pxEnd. */
+	pxFirstFreeBlock = ( void * ) pucAlignedHeap;
+	pxFirstFreeBlock->xBlockSize = uxAddress - ( size_t ) pxFirstFreeBlock;
+	pxFirstFreeBlock->pxNextFreeBlock = pxEnd;
+
+	/* Only one block exists - and it covers the entire usable heap space. */
+	xMinimumEverFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;
+	xFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;
+
+	/* Work out the position of the top bit in a size_t variable. */
+	xBlockAllocatedBit = ( ( size_t ) 1 ) << ( ( sizeof( size_t ) * heapBITS_PER_BYTE ) - 1 );
+}
+/*-----------------------------------------------------------*/
+
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert )
+{
+BlockLink_t *pxIterator;
+uint8_t *puc;
+
+	/* Iterate through the list until a block is found that has a higher address
+	than the block being inserted. */
+	for( pxIterator = &xStart; pxIterator->pxNextFreeBlock < pxBlockToInsert; pxIterator = pxIterator->pxNextFreeBlock )
+	{
+		/* Nothing to do here, just iterate to the right position. */
+	}
+
+	/* Do the block being inserted, and the block it is being inserted after
+	make a contiguous block of memory? */
+	puc = ( uint8_t * ) pxIterator;
+	if( ( puc + pxIterator->xBlockSize ) == ( uint8_t * ) pxBlockToInsert )
+	{
+		pxIterator->xBlockSize += pxBlockToInsert->xBlockSize;
+		pxBlockToInsert = pxIterator;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	/* Do the block being inserted, and the block it is being inserted before
+	make a contiguous block of memory? */
+	puc = ( uint8_t * ) pxBlockToInsert;
+	if( ( puc + pxBlockToInsert->xBlockSize ) == ( uint8_t * ) pxIterator->pxNextFreeBlock )
+	{
+		if( pxIterator->pxNextFreeBlock != pxEnd )
+		{
+			/* Form one big block from the two blocks. */
+			pxBlockToInsert->xBlockSize += pxIterator->pxNextFreeBlock->xBlockSize;
+			pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock->pxNextFreeBlock;
+		}
+		else
+		{
+			pxBlockToInsert->pxNextFreeBlock = pxEnd;
+		}
+	}
+	else
+	{
+		pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock;
+	}
+
+	/* If the block being inserted plugged a gab, so was merged with the block
+	before and the block after, then it's pxNextFreeBlock pointer will have
+	already been set, and should not be set here as that would make it point
+	to itself. */
+	if( pxIterator != pxBlockToInsert )
+	{
+		pxIterator->pxNextFreeBlock = pxBlockToInsert;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vPortGetHeapStats( HeapStats_t *pxHeapStats )
+{
+BlockLink_t *pxBlock;
+size_t xBlocks = 0, xMaxSize = 0, xMinSize = portMAX_DELAY; /* portMAX_DELAY used as a portable way of getting the maximum value. */
+
+	vTaskSuspendAll();
+	{
+		pxBlock = xStart.pxNextFreeBlock;
+
+		/* pxBlock will be NULL if the heap has not been initialised.  The heap
+		is initialised automatically when the first allocation is made. */
+		if( pxBlock != NULL )
+		{
+			do
+			{
+				/* Increment the number of blocks and record the largest block seen
+				so far. */
+				xBlocks++;
+
+				if( pxBlock->xBlockSize > xMaxSize )
+				{
+					xMaxSize = pxBlock->xBlockSize;
+				}
+
+				if( pxBlock->xBlockSize < xMinSize )
+				{
+					xMinSize = pxBlock->xBlockSize;
+				}
+
+				/* Move to the next block in the chain until the last block is
+				reached. */
+				pxBlock = pxBlock->pxNextFreeBlock;
+			} while( pxBlock != pxEnd );
+		}
+	}
+	xTaskResumeAll();
+
+	pxHeapStats->xSizeOfLargestFreeBlockInBytes = xMaxSize;
+	pxHeapStats->xSizeOfSmallestFreeBlockInBytes = xMinSize;
+	pxHeapStats->xNumberOfFreeBlocks = xBlocks;
+
+	taskENTER_CRITICAL();
+	{
+		pxHeapStats->xAvailableHeapSpaceInBytes = xFreeBytesRemaining;
+		pxHeapStats->xNumberOfSuccessfulAllocations = xNumberOfSuccessfulAllocations;
+		pxHeapStats->xNumberOfSuccessfulFrees = xNumberOfSuccessfulFrees;
+		pxHeapStats->xMinimumEverFreeBytesRemaining = xMinimumEverFreeBytesRemaining;
+	}
+	taskEXIT_CRITICAL();
+}
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/queue.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/queue.c
new file mode 100644
index 0000000..e35055f
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/queue.c
@@ -0,0 +1,2945 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#include 
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+#if ( configUSE_CO_ROUTINES == 1 )
+	#include "croutine.h"
+#endif
+
+/* Lint e9021, e961 and e750 are suppressed as a MISRA exception justified
+because the MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined
+for the header files above, but not in this file, in order to generate the
+correct privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750 !e9021. */
+
+
+/* Constants used with the cRxLock and cTxLock structure members. */
+#define queueUNLOCKED					( ( int8_t ) -1 )
+#define queueLOCKED_UNMODIFIED			( ( int8_t ) 0 )
+
+/* When the Queue_t structure is used to represent a base queue its pcHead and
+pcTail members are used as pointers into the queue storage area.  When the
+Queue_t structure is used to represent a mutex pcHead and pcTail pointers are
+not necessary, and the pcHead pointer is set to NULL to indicate that the
+structure instead holds a pointer to the mutex holder (if any).  Map alternative
+names to the pcHead and structure member to ensure the readability of the code
+is maintained.  The QueuePointers_t and SemaphoreData_t types are used to form
+a union as their usage is mutually exclusive dependent on what the queue is
+being used for. */
+#define uxQueueType						pcHead
+#define queueQUEUE_IS_MUTEX				NULL
+
+typedef struct QueuePointers
+{
+	int8_t *pcTail;					/*< Points to the byte at the end of the queue storage area.  Once more byte is allocated than necessary to store the queue items, this is used as a marker. */
+	int8_t *pcReadFrom;				/*< Points to the last place that a queued item was read from when the structure is used as a queue. */
+} QueuePointers_t;
+
+typedef struct SemaphoreData
+{
+	TaskHandle_t xMutexHolder;		 /*< The handle of the task that holds the mutex. */
+	UBaseType_t uxRecursiveCallCount;/*< Maintains a count of the number of times a recursive mutex has been recursively 'taken' when the structure is used as a mutex. */
+} SemaphoreData_t;
+
+/* Semaphores do not actually store or copy data, so have an item size of
+zero. */
+#define queueSEMAPHORE_QUEUE_ITEM_LENGTH ( ( UBaseType_t ) 0 )
+#define queueMUTEX_GIVE_BLOCK_TIME		 ( ( TickType_t ) 0U )
+
+#if( configUSE_PREEMPTION == 0 )
+	/* If the cooperative scheduler is being used then a yield should not be
+	performed just because a higher priority task has been woken. */
+	#define queueYIELD_IF_USING_PREEMPTION()
+#else
+	#define queueYIELD_IF_USING_PREEMPTION() portYIELD_WITHIN_API()
+#endif
+
+/*
+ * Definition of the queue used by the scheduler.
+ * Items are queued by copy, not reference.  See the following link for the
+ * rationale: https://www.freertos.org/Embedded-RTOS-Queues.html
+ */
+typedef struct QueueDefinition 		/* The old naming convention is used to prevent breaking kernel aware debuggers. */
+{
+	int8_t *pcHead;					/*< Points to the beginning of the queue storage area. */
+	int8_t *pcWriteTo;				/*< Points to the free next place in the storage area. */
+
+	union
+	{
+		QueuePointers_t xQueue;		/*< Data required exclusively when this structure is used as a queue. */
+		SemaphoreData_t xSemaphore; /*< Data required exclusively when this structure is used as a semaphore. */
+	} u;
+
+	List_t xTasksWaitingToSend;		/*< List of tasks that are blocked waiting to post onto this queue.  Stored in priority order. */
+	List_t xTasksWaitingToReceive;	/*< List of tasks that are blocked waiting to read from this queue.  Stored in priority order. */
+
+	volatile UBaseType_t uxMessagesWaiting;/*< The number of items currently in the queue. */
+	UBaseType_t uxLength;			/*< The length of the queue defined as the number of items it will hold, not the number of bytes. */
+	UBaseType_t uxItemSize;			/*< The size of each items that the queue will hold. */
+
+	volatile int8_t cRxLock;		/*< Stores the number of items received from the queue (removed from the queue) while the queue was locked.  Set to queueUNLOCKED when the queue is not locked. */
+	volatile int8_t cTxLock;		/*< Stores the number of items transmitted to the queue (added to the queue) while the queue was locked.  Set to queueUNLOCKED when the queue is not locked. */
+
+	#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+		uint8_t ucStaticallyAllocated;	/*< Set to pdTRUE if the memory used by the queue was statically allocated to ensure no attempt is made to free the memory. */
+	#endif
+
+	#if ( configUSE_QUEUE_SETS == 1 )
+		struct QueueDefinition *pxQueueSetContainer;
+	#endif
+
+	#if ( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t uxQueueNumber;
+		uint8_t ucQueueType;
+	#endif
+
+} xQUEUE;
+
+/* The old xQUEUE name is maintained above then typedefed to the new Queue_t
+name below to enable the use of older kernel aware debuggers. */
+typedef xQUEUE Queue_t;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The queue registry is just a means for kernel aware debuggers to locate
+ * queue structures.  It has no other purpose so is an optional component.
+ */
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	/* The type stored within the queue registry array.  This allows a name
+	to be assigned to each queue making kernel aware debugging a little
+	more user friendly. */
+	typedef struct QUEUE_REGISTRY_ITEM
+	{
+		const char *pcQueueName; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+		QueueHandle_t xHandle;
+	} xQueueRegistryItem;
+
+	/* The old xQueueRegistryItem name is maintained above then typedefed to the
+	new xQueueRegistryItem name below to enable the use of older kernel aware
+	debuggers. */
+	typedef xQueueRegistryItem QueueRegistryItem_t;
+
+	/* The queue registry is simply an array of QueueRegistryItem_t structures.
+	The pcQueueName member of a structure being NULL is indicative of the
+	array position being vacant. */
+	PRIVILEGED_DATA QueueRegistryItem_t xQueueRegistry[ configQUEUE_REGISTRY_SIZE ];
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+
+/*
+ * Unlocks a queue locked by a call to prvLockQueue.  Locking a queue does not
+ * prevent an ISR from adding or removing items to the queue, but does prevent
+ * an ISR from removing tasks from the queue event lists.  If an ISR finds a
+ * queue is locked it will instead increment the appropriate queue lock count
+ * to indicate that a task may require unblocking.  When the queue in unlocked
+ * these lock counts are inspected, and the appropriate action taken.
+ */
+static void prvUnlockQueue( Queue_t * const pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any data in a queue.
+ *
+ * @return pdTRUE if the queue contains no items, otherwise pdFALSE.
+ */
+static BaseType_t prvIsQueueEmpty( const Queue_t *pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any space in a queue.
+ *
+ * @return pdTRUE if there is no space, otherwise pdFALSE;
+ */
+static BaseType_t prvIsQueueFull( const Queue_t *pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Copies an item into the queue, either at the front of the queue or the
+ * back of the queue.
+ */
+static BaseType_t prvCopyDataToQueue( Queue_t * const pxQueue, const void *pvItemToQueue, const BaseType_t xPosition ) PRIVILEGED_FUNCTION;
+
+/*
+ * Copies an item out of a queue.
+ */
+static void prvCopyDataFromQueue( Queue_t * const pxQueue, void * const pvBuffer ) PRIVILEGED_FUNCTION;
+
+#if ( configUSE_QUEUE_SETS == 1 )
+	/*
+	 * Checks to see if a queue is a member of a queue set, and if so, notifies
+	 * the queue set that the queue contains data.
+	 */
+	static BaseType_t prvNotifyQueueSetContainer( const Queue_t * const pxQueue ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * Called after a Queue_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewQueue( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, const uint8_t ucQueueType, Queue_t *pxNewQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Mutexes are a special type of queue.  When a mutex is created, first the
+ * queue is created, then prvInitialiseMutex() is called to configure the queue
+ * as a mutex.
+ */
+#if( configUSE_MUTEXES == 1 )
+	static void prvInitialiseMutex( Queue_t *pxNewQueue ) PRIVILEGED_FUNCTION;
+#endif
+
+#if( configUSE_MUTEXES == 1 )
+	/*
+	 * If a task waiting for a mutex causes the mutex holder to inherit a
+	 * priority, but the waiting task times out, then the holder should
+	 * disinherit the priority - but only down to the highest priority of any
+	 * other tasks that are waiting for the same mutex.  This function returns
+	 * that priority.
+	 */
+	static UBaseType_t prvGetDisinheritPriorityAfterTimeout( const Queue_t * const pxQueue ) PRIVILEGED_FUNCTION;
+#endif
+/*-----------------------------------------------------------*/
+
+/*
+ * Macro to mark a queue as locked.  Locking a queue prevents an ISR from
+ * accessing the queue event lists.
+ */
+#define prvLockQueue( pxQueue )								\
+	taskENTER_CRITICAL();									\
+	{														\
+		if( ( pxQueue )->cRxLock == queueUNLOCKED )			\
+		{													\
+			( pxQueue )->cRxLock = queueLOCKED_UNMODIFIED;	\
+		}													\
+		if( ( pxQueue )->cTxLock == queueUNLOCKED )			\
+		{													\
+			( pxQueue )->cTxLock = queueLOCKED_UNMODIFIED;	\
+		}													\
+	}														\
+	taskEXIT_CRITICAL()
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue )
+{
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+
+	taskENTER_CRITICAL();
+	{
+		pxQueue->u.xQueue.pcTail = pxQueue->pcHead + ( pxQueue->uxLength * pxQueue->uxItemSize ); /*lint !e9016 Pointer arithmetic allowed on char types, especially when it assists conveying intent. */
+		pxQueue->uxMessagesWaiting = ( UBaseType_t ) 0U;
+		pxQueue->pcWriteTo = pxQueue->pcHead;
+		pxQueue->u.xQueue.pcReadFrom = pxQueue->pcHead + ( ( pxQueue->uxLength - 1U ) * pxQueue->uxItemSize ); /*lint !e9016 Pointer arithmetic allowed on char types, especially when it assists conveying intent. */
+		pxQueue->cRxLock = queueUNLOCKED;
+		pxQueue->cTxLock = queueUNLOCKED;
+
+		if( xNewQueue == pdFALSE )
+		{
+			/* If there are tasks blocked waiting to read from the queue, then
+			the tasks will remain blocked as after this function exits the queue
+			will still be empty.  If there are tasks blocked waiting to write to
+			the queue, then one should be unblocked as after this function exits
+			it will be possible to write to it. */
+			if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+			{
+				if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+				{
+					queueYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			/* Ensure the event queues start in the correct state. */
+			vListInitialise( &( pxQueue->xTasksWaitingToSend ) );
+			vListInitialise( &( pxQueue->xTasksWaitingToReceive ) );
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	/* A value is returned for calling semantic consistency with previous
+	versions. */
+	return pdPASS;
+}
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType )
+	{
+	Queue_t *pxNewQueue;
+
+		configASSERT( uxQueueLength > ( UBaseType_t ) 0 );
+
+		/* The StaticQueue_t structure and the queue storage area must be
+		supplied. */
+		configASSERT( pxStaticQueue != NULL );
+
+		/* A queue storage area should be provided if the item size is not 0, and
+		should not be provided if the item size is 0. */
+		configASSERT( !( ( pucQueueStorage != NULL ) && ( uxItemSize == 0 ) ) );
+		configASSERT( !( ( pucQueueStorage == NULL ) && ( uxItemSize != 0 ) ) );
+
+		#if( configASSERT_DEFINED == 1 )
+		{
+			/* Sanity check that the size of the structure used to declare a
+			variable of type StaticQueue_t or StaticSemaphore_t equals the size of
+			the real queue and semaphore structures. */
+			volatile size_t xSize = sizeof( StaticQueue_t );
+			configASSERT( xSize == sizeof( Queue_t ) );
+			( void ) xSize; /* Keeps lint quiet when configASSERT() is not defined. */
+		}
+		#endif /* configASSERT_DEFINED */
+
+		/* The address of a statically allocated queue was passed in, use it.
+		The address of a statically allocated storage area was also passed in
+		but is already set. */
+		pxNewQueue = ( Queue_t * ) pxStaticQueue; /*lint !e740 !e9087 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+
+		if( pxNewQueue != NULL )
+		{
+			#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+			{
+				/* Queues can be allocated wither statically or dynamically, so
+				note this queue was allocated statically in case the queue is
+				later deleted. */
+				pxNewQueue->ucStaticallyAllocated = pdTRUE;
+			}
+			#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+
+			prvInitialiseNewQueue( uxQueueLength, uxItemSize, pucQueueStorage, ucQueueType, pxNewQueue );
+		}
+		else
+		{
+			traceQUEUE_CREATE_FAILED( ucQueueType );
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return pxNewQueue;
+	}
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+	QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType )
+	{
+	Queue_t *pxNewQueue;
+	size_t xQueueSizeInBytes;
+	uint8_t *pucQueueStorage;
+
+		configASSERT( uxQueueLength > ( UBaseType_t ) 0 );
+
+		/* Allocate enough space to hold the maximum number of items that
+		can be in the queue at any time.  It is valid for uxItemSize to be
+		zero in the case the queue is used as a semaphore. */
+		xQueueSizeInBytes = ( size_t ) ( uxQueueLength * uxItemSize ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+		/* Allocate the queue and storage area.  Justification for MISRA
+		deviation as follows:  pvPortMalloc() always ensures returned memory
+		blocks are aligned per the requirements of the MCU stack.  In this case
+		pvPortMalloc() must return a pointer that is guaranteed to meet the
+		alignment requirements of the Queue_t structure - which in this case
+		is an int8_t *.  Therefore, whenever the stack alignment requirements
+		are greater than or equal to the pointer to char requirements the cast
+		is safe.  In other cases alignment requirements are not strict (one or
+		two bytes). */
+		pxNewQueue = ( Queue_t * ) pvPortMalloc( sizeof( Queue_t ) + xQueueSizeInBytes ); /*lint !e9087 !e9079 see comment above. */
+
+		if( pxNewQueue != NULL )
+		{
+			/* Jump past the queue structure to find the location of the queue
+			storage area. */
+			pucQueueStorage = ( uint8_t * ) pxNewQueue;
+			pucQueueStorage += sizeof( Queue_t ); /*lint !e9016 Pointer arithmetic allowed on char types, especially when it assists conveying intent. */
+
+			#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+			{
+				/* Queues can be created either statically or dynamically, so
+				note this task was created dynamically in case it is later
+				deleted. */
+				pxNewQueue->ucStaticallyAllocated = pdFALSE;
+			}
+			#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+			prvInitialiseNewQueue( uxQueueLength, uxItemSize, pucQueueStorage, ucQueueType, pxNewQueue );
+		}
+		else
+		{
+			traceQUEUE_CREATE_FAILED( ucQueueType );
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return pxNewQueue;
+	}
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewQueue( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, const uint8_t ucQueueType, Queue_t *pxNewQueue )
+{
+	/* Remove compiler warnings about unused parameters should
+	configUSE_TRACE_FACILITY not be set to 1. */
+	( void ) ucQueueType;
+
+	if( uxItemSize == ( UBaseType_t ) 0 )
+	{
+		/* No RAM was allocated for the queue storage area, but PC head cannot
+		be set to NULL because NULL is used as a key to say the queue is used as
+		a mutex.  Therefore just set pcHead to point to the queue as a benign
+		value that is known to be within the memory map. */
+		pxNewQueue->pcHead = ( int8_t * ) pxNewQueue;
+	}
+	else
+	{
+		/* Set the head to the start of the queue storage area. */
+		pxNewQueue->pcHead = ( int8_t * ) pucQueueStorage;
+	}
+
+	/* Initialise the queue members as described where the queue type is
+	defined. */
+	pxNewQueue->uxLength = uxQueueLength;
+	pxNewQueue->uxItemSize = uxItemSize;
+	( void ) xQueueGenericReset( pxNewQueue, pdTRUE );
+
+	#if ( configUSE_TRACE_FACILITY == 1 )
+	{
+		pxNewQueue->ucQueueType = ucQueueType;
+	}
+	#endif /* configUSE_TRACE_FACILITY */
+
+	#if( configUSE_QUEUE_SETS == 1 )
+	{
+		pxNewQueue->pxQueueSetContainer = NULL;
+	}
+	#endif /* configUSE_QUEUE_SETS */
+
+	traceQUEUE_CREATE( pxNewQueue );
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_MUTEXES == 1 )
+
+	static void prvInitialiseMutex( Queue_t *pxNewQueue )
+	{
+		if( pxNewQueue != NULL )
+		{
+			/* The queue create function will set all the queue structure members
+			correctly for a generic queue, but this function is creating a
+			mutex.  Overwrite those members that need to be set differently -
+			in particular the information required for priority inheritance. */
+			pxNewQueue->u.xSemaphore.xMutexHolder = NULL;
+			pxNewQueue->uxQueueType = queueQUEUE_IS_MUTEX;
+
+			/* In case this is a recursive mutex. */
+			pxNewQueue->u.xSemaphore.uxRecursiveCallCount = 0;
+
+			traceCREATE_MUTEX( pxNewQueue );
+
+			/* Start with the semaphore in the expected state. */
+			( void ) xQueueGenericSend( pxNewQueue, NULL, ( TickType_t ) 0U, queueSEND_TO_BACK );
+		}
+		else
+		{
+			traceCREATE_MUTEX_FAILED();
+		}
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_MUTEXES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType )
+	{
+	QueueHandle_t xNewQueue;
+	const UBaseType_t uxMutexLength = ( UBaseType_t ) 1, uxMutexSize = ( UBaseType_t ) 0;
+
+		xNewQueue = xQueueGenericCreate( uxMutexLength, uxMutexSize, ucQueueType );
+		prvInitialiseMutex( ( Queue_t * ) xNewQueue );
+
+		return xNewQueue;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_MUTEXES == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue )
+	{
+	QueueHandle_t xNewQueue;
+	const UBaseType_t uxMutexLength = ( UBaseType_t ) 1, uxMutexSize = ( UBaseType_t ) 0;
+
+		/* Prevent compiler warnings about unused parameters if
+		configUSE_TRACE_FACILITY does not equal 1. */
+		( void ) ucQueueType;
+
+		xNewQueue = xQueueGenericCreateStatic( uxMutexLength, uxMutexSize, NULL, pxStaticQueue, ucQueueType );
+		prvInitialiseMutex( ( Queue_t * ) xNewQueue );
+
+		return xNewQueue;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_MUTEXES == 1 ) && ( INCLUDE_xSemaphoreGetMutexHolder == 1 ) )
+
+	TaskHandle_t xQueueGetMutexHolder( QueueHandle_t xSemaphore )
+	{
+	TaskHandle_t pxReturn;
+	Queue_t * const pxSemaphore = ( Queue_t * ) xSemaphore;
+
+		/* This function is called by xSemaphoreGetMutexHolder(), and should not
+		be called directly.  Note:  This is a good way of determining if the
+		calling task is the mutex holder, but not a good way of determining the
+		identity of the mutex holder, as the holder may change between the
+		following critical section exiting and the function returning. */
+		taskENTER_CRITICAL();
+		{
+			if( pxSemaphore->uxQueueType == queueQUEUE_IS_MUTEX )
+			{
+				pxReturn = pxSemaphore->u.xSemaphore.xMutexHolder;
+			}
+			else
+			{
+				pxReturn = NULL;
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return pxReturn;
+	} /*lint !e818 xSemaphore cannot be a pointer to const because it is a typedef. */
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_MUTEXES == 1 ) && ( INCLUDE_xSemaphoreGetMutexHolder == 1 ) )
+
+	TaskHandle_t xQueueGetMutexHolderFromISR( QueueHandle_t xSemaphore )
+	{
+	TaskHandle_t pxReturn;
+
+		configASSERT( xSemaphore );
+
+		/* Mutexes cannot be used in interrupt service routines, so the mutex
+		holder should not change in an ISR, and therefore a critical section is
+		not required here. */
+		if( ( ( Queue_t * ) xSemaphore )->uxQueueType == queueQUEUE_IS_MUTEX )
+		{
+			pxReturn = ( ( Queue_t * ) xSemaphore )->u.xSemaphore.xMutexHolder;
+		}
+		else
+		{
+			pxReturn = NULL;
+		}
+
+		return pxReturn;
+	} /*lint !e818 xSemaphore cannot be a pointer to const because it is a typedef. */
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_RECURSIVE_MUTEXES == 1 )
+
+	BaseType_t xQueueGiveMutexRecursive( QueueHandle_t xMutex )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxMutex = ( Queue_t * ) xMutex;
+
+		configASSERT( pxMutex );
+
+		/* If this is the task that holds the mutex then xMutexHolder will not
+		change outside of this task.  If this task does not hold the mutex then
+		pxMutexHolder can never coincidentally equal the tasks handle, and as
+		this is the only condition we are interested in it does not matter if
+		pxMutexHolder is accessed simultaneously by another task.  Therefore no
+		mutual exclusion is required to test the pxMutexHolder variable. */
+		if( pxMutex->u.xSemaphore.xMutexHolder == xTaskGetCurrentTaskHandle() )
+		{
+			traceGIVE_MUTEX_RECURSIVE( pxMutex );
+
+			/* uxRecursiveCallCount cannot be zero if xMutexHolder is equal to
+			the task handle, therefore no underflow check is required.  Also,
+			uxRecursiveCallCount is only modified by the mutex holder, and as
+			there can only be one, no mutual exclusion is required to modify the
+			uxRecursiveCallCount member. */
+			( pxMutex->u.xSemaphore.uxRecursiveCallCount )--;
+
+			/* Has the recursive call count unwound to 0? */
+			if( pxMutex->u.xSemaphore.uxRecursiveCallCount == ( UBaseType_t ) 0 )
+			{
+				/* Return the mutex.  This will automatically unblock any other
+				task that might be waiting to access the mutex. */
+				( void ) xQueueGenericSend( pxMutex, NULL, queueMUTEX_GIVE_BLOCK_TIME, queueSEND_TO_BACK );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			/* The mutex cannot be given because the calling task is not the
+			holder. */
+			xReturn = pdFAIL;
+
+			traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex );
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_RECURSIVE_MUTEXES == 1 )
+
+	BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxMutex = ( Queue_t * ) xMutex;
+
+		configASSERT( pxMutex );
+
+		/* Comments regarding mutual exclusion as per those within
+		xQueueGiveMutexRecursive(). */
+
+		traceTAKE_MUTEX_RECURSIVE( pxMutex );
+
+		if( pxMutex->u.xSemaphore.xMutexHolder == xTaskGetCurrentTaskHandle() )
+		{
+			( pxMutex->u.xSemaphore.uxRecursiveCallCount )++;
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = xQueueSemaphoreTake( pxMutex, xTicksToWait );
+
+			/* pdPASS will only be returned if the mutex was successfully
+			obtained.  The calling task may have entered the Blocked state
+			before reaching here. */
+			if( xReturn != pdFAIL )
+			{
+				( pxMutex->u.xSemaphore.uxRecursiveCallCount )++;
+			}
+			else
+			{
+				traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex );
+			}
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue )
+	{
+	QueueHandle_t xHandle;
+
+		configASSERT( uxMaxCount != 0 );
+		configASSERT( uxInitialCount <= uxMaxCount );
+
+		xHandle = xQueueGenericCreateStatic( uxMaxCount, queueSEMAPHORE_QUEUE_ITEM_LENGTH, NULL, pxStaticQueue, queueQUEUE_TYPE_COUNTING_SEMAPHORE );
+
+		if( xHandle != NULL )
+		{
+			( ( Queue_t * ) xHandle )->uxMessagesWaiting = uxInitialCount;
+
+			traceCREATE_COUNTING_SEMAPHORE();
+		}
+		else
+		{
+			traceCREATE_COUNTING_SEMAPHORE_FAILED();
+		}
+
+		return xHandle;
+	}
+
+#endif /* ( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount )
+	{
+	QueueHandle_t xHandle;
+
+		configASSERT( uxMaxCount != 0 );
+		configASSERT( uxInitialCount <= uxMaxCount );
+
+		xHandle = xQueueGenericCreate( uxMaxCount, queueSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_COUNTING_SEMAPHORE );
+
+		if( xHandle != NULL )
+		{
+			( ( Queue_t * ) xHandle )->uxMessagesWaiting = uxInitialCount;
+
+			traceCREATE_COUNTING_SEMAPHORE();
+		}
+		else
+		{
+			traceCREATE_COUNTING_SEMAPHORE_FAILED();
+		}
+
+		return xHandle;
+	}
+
+#endif /* ( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition )
+{
+BaseType_t xEntryTimeSet = pdFALSE, xYieldRequired;
+TimeOut_t xTimeOut;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+	configASSERT( !( ( xCopyPosition == queueOVERWRITE ) && ( pxQueue->uxLength != 1 ) ) );
+	#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+	{
+		configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+	}
+	#endif
+
+
+	/*lint -save -e904 This function relaxes the coding standard somewhat to
+	allow return statements within the function itself.  This is done in the
+	interest of execution time efficiency. */
+	for( ;; )
+	{
+		taskENTER_CRITICAL();
+		{
+			/* Is there room on the queue now?  The running task must be the
+			highest priority task wanting to access the queue.  If the head item
+			in the queue is to be overwritten then it does not matter if the
+			queue is full. */
+			if( ( pxQueue->uxMessagesWaiting < pxQueue->uxLength ) || ( xCopyPosition == queueOVERWRITE ) )
+			{
+				traceQUEUE_SEND( pxQueue );
+
+				#if ( configUSE_QUEUE_SETS == 1 )
+				{
+				const UBaseType_t uxPreviousMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+					xYieldRequired = prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+					if( pxQueue->pxQueueSetContainer != NULL )
+					{
+						if( ( xCopyPosition == queueOVERWRITE ) && ( uxPreviousMessagesWaiting != ( UBaseType_t ) 0 ) )
+						{
+							/* Do not notify the queue set as an existing item
+							was overwritten in the queue so the number of items
+							in the queue has not changed. */
+							mtCOVERAGE_TEST_MARKER();
+						}
+						else if( prvNotifyQueueSetContainer( pxQueue ) != pdFALSE )
+						{
+							/* The queue is a member of a queue set, and posting
+							to the queue set caused a higher priority task to
+							unblock. A context switch is required. */
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						/* If there was a task waiting for data to arrive on the
+						queue then unblock it now. */
+						if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+						{
+							if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+							{
+								/* The unblocked task has a priority higher than
+								our own so yield immediately.  Yes it is ok to
+								do this from within the critical section - the
+								kernel takes care of that. */
+								queueYIELD_IF_USING_PREEMPTION();
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else if( xYieldRequired != pdFALSE )
+						{
+							/* This path is a special case that will only get
+							executed if the task was holding multiple mutexes
+							and the mutexes were given back in an order that is
+							different to that in which they were taken. */
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+				}
+				#else /* configUSE_QUEUE_SETS */
+				{
+					xYieldRequired = prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+					/* If there was a task waiting for data to arrive on the
+					queue then unblock it now. */
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The unblocked task has a priority higher than
+							our own so yield immediately.  Yes it is ok to do
+							this from within the critical section - the kernel
+							takes care of that. */
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else if( xYieldRequired != pdFALSE )
+					{
+						/* This path is a special case that will only get
+						executed if the task was holding multiple mutexes and
+						the mutexes were given back in an order that is
+						different to that in which they were taken. */
+						queueYIELD_IF_USING_PREEMPTION();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_QUEUE_SETS */
+
+				taskEXIT_CRITICAL();
+				return pdPASS;
+			}
+			else
+			{
+				if( xTicksToWait == ( TickType_t ) 0 )
+				{
+					/* The queue was full and no block time is specified (or
+					the block time has expired) so leave now. */
+					taskEXIT_CRITICAL();
+
+					/* Return to the original privilege level before exiting
+					the function. */
+					traceQUEUE_SEND_FAILED( pxQueue );
+					return errQUEUE_FULL;
+				}
+				else if( xEntryTimeSet == pdFALSE )
+				{
+					/* The queue was full and a block time was specified so
+					configure the timeout structure. */
+					vTaskInternalSetTimeOutState( &xTimeOut );
+					xEntryTimeSet = pdTRUE;
+				}
+				else
+				{
+					/* Entry time was already set. */
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		/* Interrupts and other tasks can send to and receive from the queue
+		now the critical section has been exited. */
+
+		vTaskSuspendAll();
+		prvLockQueue( pxQueue );
+
+		/* Update the timeout state to see if it has expired yet. */
+		if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+		{
+			if( prvIsQueueFull( pxQueue ) != pdFALSE )
+			{
+				traceBLOCKING_ON_QUEUE_SEND( pxQueue );
+				vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );
+
+				/* Unlocking the queue means queue events can effect the
+				event list.  It is possible that interrupts occurring now
+				remove this task from the event list again - but as the
+				scheduler is suspended the task will go onto the pending
+				ready last instead of the actual ready list. */
+				prvUnlockQueue( pxQueue );
+
+				/* Resuming the scheduler will move tasks from the pending
+				ready list into the ready list - so it is feasible that this
+				task is already in a ready list before it yields - in which
+				case the yield will not cause a context switch unless there
+				is also a higher priority task in the pending ready list. */
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					portYIELD_WITHIN_API();
+				}
+			}
+			else
+			{
+				/* Try again. */
+				prvUnlockQueue( pxQueue );
+				( void ) xTaskResumeAll();
+			}
+		}
+		else
+		{
+			/* The timeout has expired. */
+			prvUnlockQueue( pxQueue );
+			( void ) xTaskResumeAll();
+
+			traceQUEUE_SEND_FAILED( pxQueue );
+			return errQUEUE_FULL;
+		}
+	} /*lint -restore */
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+	configASSERT( !( ( xCopyPosition == queueOVERWRITE ) && ( pxQueue->uxLength != 1 ) ) );
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	/* Similar to xQueueGenericSend, except without blocking if there is no room
+	in the queue.  Also don't directly wake a task that was blocked on a queue
+	read, instead return a flag to say whether a context switch is required or
+	not (i.e. has a task with a higher priority than us been woken by this
+	post). */
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		if( ( pxQueue->uxMessagesWaiting < pxQueue->uxLength ) || ( xCopyPosition == queueOVERWRITE ) )
+		{
+			const int8_t cTxLock = pxQueue->cTxLock;
+			const UBaseType_t uxPreviousMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+			traceQUEUE_SEND_FROM_ISR( pxQueue );
+
+			/* Semaphores use xQueueGiveFromISR(), so pxQueue will not be a
+			semaphore or mutex.  That means prvCopyDataToQueue() cannot result
+			in a task disinheriting a priority and prvCopyDataToQueue() can be
+			called here even though the disinherit function does not check if
+			the scheduler is suspended before accessing the ready lists. */
+			( void ) prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+			/* The event list is not altered if the queue is locked.  This will
+			be done when the queue is unlocked later. */
+			if( cTxLock == queueUNLOCKED )
+			{
+				#if ( configUSE_QUEUE_SETS == 1 )
+				{
+					if( pxQueue->pxQueueSetContainer != NULL )
+					{
+						if( ( xCopyPosition == queueOVERWRITE ) && ( uxPreviousMessagesWaiting != ( UBaseType_t ) 0 ) )
+						{
+							/* Do not notify the queue set as an existing item
+							was overwritten in the queue so the number of items
+							in the queue has not changed. */
+							mtCOVERAGE_TEST_MARKER();
+						}
+						else if( prvNotifyQueueSetContainer( pxQueue ) != pdFALSE )
+						{
+							/* The queue is a member of a queue set, and posting
+							to the queue set caused a higher priority task to
+							unblock.  A context switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+						{
+							if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+							{
+								/* The task waiting has a higher priority so
+								record that a context switch is required. */
+								if( pxHigherPriorityTaskWoken != NULL )
+								{
+									*pxHigherPriorityTaskWoken = pdTRUE;
+								}
+								else
+								{
+									mtCOVERAGE_TEST_MARKER();
+								}
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+				}
+				#else /* configUSE_QUEUE_SETS */
+				{
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The task waiting has a higher priority so record that a
+							context	switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+					
+					/* Not used in this path. */
+					( void ) uxPreviousMessagesWaiting;
+				}
+				#endif /* configUSE_QUEUE_SETS */
+			}
+			else
+			{
+				/* Increment the lock count so the task that unlocks the queue
+				knows that data was posted while it was locked. */
+				pxQueue->cTxLock = ( int8_t ) ( cTxLock + 1 );
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
+			xReturn = errQUEUE_FULL;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = xQueue;
+
+	/* Similar to xQueueGenericSendFromISR() but used with semaphores where the
+	item size is 0.  Don't directly wake a task that was blocked on a queue
+	read, instead return a flag to say whether a context switch is required or
+	not (i.e. has a task with a higher priority than us been woken by this
+	post). */
+
+	configASSERT( pxQueue );
+
+	/* xQueueGenericSendFromISR() should be used instead of xQueueGiveFromISR()
+	if the item size is not 0. */
+	configASSERT( pxQueue->uxItemSize == 0 );
+
+	/* Normally a mutex would not be given from an interrupt, especially if
+	there is a mutex holder, as priority inheritance makes no sense for an
+	interrupts, only tasks. */
+	configASSERT( !( ( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX ) && ( pxQueue->u.xSemaphore.xMutexHolder != NULL ) ) );
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+		/* When the queue is used to implement a semaphore no data is ever
+		moved through the queue but it is still valid to see if the queue 'has
+		space'. */
+		if( uxMessagesWaiting < pxQueue->uxLength )
+		{
+			const int8_t cTxLock = pxQueue->cTxLock;
+
+			traceQUEUE_SEND_FROM_ISR( pxQueue );
+
+			/* A task can only have an inherited priority if it is a mutex
+			holder - and if there is a mutex holder then the mutex cannot be
+			given from an ISR.  As this is the ISR version of the function it
+			can be assumed there is no mutex holder and no need to determine if
+			priority disinheritance is needed.  Simply increase the count of
+			messages (semaphores) available. */
+			pxQueue->uxMessagesWaiting = uxMessagesWaiting + ( UBaseType_t ) 1;
+
+			/* The event list is not altered if the queue is locked.  This will
+			be done when the queue is unlocked later. */
+			if( cTxLock == queueUNLOCKED )
+			{
+				#if ( configUSE_QUEUE_SETS == 1 )
+				{
+					if( pxQueue->pxQueueSetContainer != NULL )
+					{
+						if( prvNotifyQueueSetContainer( pxQueue ) != pdFALSE )
+						{
+							/* The semaphore is a member of a queue set, and
+							posting	to the queue set caused a higher priority
+							task to	unblock.  A context switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+						{
+							if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+							{
+								/* The task waiting has a higher priority so
+								record that a context switch is required. */
+								if( pxHigherPriorityTaskWoken != NULL )
+								{
+									*pxHigherPriorityTaskWoken = pdTRUE;
+								}
+								else
+								{
+									mtCOVERAGE_TEST_MARKER();
+								}
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+				}
+				#else /* configUSE_QUEUE_SETS */
+				{
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The task waiting has a higher priority so record that a
+							context	switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_QUEUE_SETS */
+			}
+			else
+			{
+				/* Increment the lock count so the task that unlocks the queue
+				knows that data was posted while it was locked. */
+				pxQueue->cTxLock = ( int8_t ) ( cTxLock + 1 );
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
+			xReturn = errQUEUE_FULL;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait )
+{
+BaseType_t xEntryTimeSet = pdFALSE;
+TimeOut_t xTimeOut;
+Queue_t * const pxQueue = xQueue;
+
+	/* Check the pointer is not NULL. */
+	configASSERT( ( pxQueue ) );
+
+	/* The buffer into which data is received can only be NULL if the data size
+	is zero (so no data is copied into the buffer. */
+	configASSERT( !( ( ( pvBuffer ) == NULL ) && ( ( pxQueue )->uxItemSize != ( UBaseType_t ) 0U ) ) );
+
+	/* Cannot block if the scheduler is suspended. */
+	#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+	{
+		configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+	}
+	#endif
+
+
+	/*lint -save -e904  This function relaxes the coding standard somewhat to
+	allow return statements within the function itself.  This is done in the
+	interest of execution time efficiency. */
+	for( ;; )
+	{
+		taskENTER_CRITICAL();
+		{
+			const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+			/* Is there data in the queue now?  To be running the calling task
+			must be the highest priority task wanting to access the queue. */
+			if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+			{
+				/* Data available, remove one item. */
+				prvCopyDataFromQueue( pxQueue, pvBuffer );
+				traceQUEUE_RECEIVE( pxQueue );
+				pxQueue->uxMessagesWaiting = uxMessagesWaiting - ( UBaseType_t ) 1;
+
+				/* There is now space in the queue, were any tasks waiting to
+				post to the queue?  If so, unblock the highest priority waiting
+				task. */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						queueYIELD_IF_USING_PREEMPTION();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				taskEXIT_CRITICAL();
+				return pdPASS;
+			}
+			else
+			{
+				if( xTicksToWait == ( TickType_t ) 0 )
+				{
+					/* The queue was empty and no block time is specified (or
+					the block time has expired) so leave now. */
+					taskEXIT_CRITICAL();
+					traceQUEUE_RECEIVE_FAILED( pxQueue );
+					return errQUEUE_EMPTY;
+				}
+				else if( xEntryTimeSet == pdFALSE )
+				{
+					/* The queue was empty and a block time was specified so
+					configure the timeout structure. */
+					vTaskInternalSetTimeOutState( &xTimeOut );
+					xEntryTimeSet = pdTRUE;
+				}
+				else
+				{
+					/* Entry time was already set. */
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		/* Interrupts and other tasks can send to and receive from the queue
+		now the critical section has been exited. */
+
+		vTaskSuspendAll();
+		prvLockQueue( pxQueue );
+
+		/* Update the timeout state to see if it has expired yet. */
+		if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+		{
+			/* The timeout has not expired.  If the queue is still empty place
+			the task on the list of tasks waiting to receive from the queue. */
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
+				vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
+				prvUnlockQueue( pxQueue );
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* The queue contains data again.  Loop back to try and read the
+				data. */
+				prvUnlockQueue( pxQueue );
+				( void ) xTaskResumeAll();
+			}
+		}
+		else
+		{
+			/* Timed out.  If there is no data in the queue exit, otherwise loop
+			back and attempt to read the data. */
+			prvUnlockQueue( pxQueue );
+			( void ) xTaskResumeAll();
+
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				traceQUEUE_RECEIVE_FAILED( pxQueue );
+				return errQUEUE_EMPTY;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	} /*lint -restore */
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueSemaphoreTake( QueueHandle_t xQueue, TickType_t xTicksToWait )
+{
+BaseType_t xEntryTimeSet = pdFALSE;
+TimeOut_t xTimeOut;
+Queue_t * const pxQueue = xQueue;
+
+#if( configUSE_MUTEXES == 1 )
+	BaseType_t xInheritanceOccurred = pdFALSE;
+#endif
+
+	/* Check the queue pointer is not NULL. */
+	configASSERT( ( pxQueue ) );
+
+	/* Check this really is a semaphore, in which case the item size will be
+	0. */
+	configASSERT( pxQueue->uxItemSize == 0 );
+
+	/* Cannot block if the scheduler is suspended. */
+	#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+	{
+		configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+	}
+	#endif
+
+
+	/*lint -save -e904 This function relaxes the coding standard somewhat to allow return
+	statements within the function itself.  This is done in the interest
+	of execution time efficiency. */
+	for( ;; )
+	{
+		taskENTER_CRITICAL();
+		{
+			/* Semaphores are queues with an item size of 0, and where the
+			number of messages in the queue is the semaphore's count value. */
+			const UBaseType_t uxSemaphoreCount = pxQueue->uxMessagesWaiting;
+
+			/* Is there data in the queue now?  To be running the calling task
+			must be the highest priority task wanting to access the queue. */
+			if( uxSemaphoreCount > ( UBaseType_t ) 0 )
+			{
+				traceQUEUE_RECEIVE( pxQueue );
+
+				/* Semaphores are queues with a data size of zero and where the
+				messages waiting is the semaphore's count.  Reduce the count. */
+				pxQueue->uxMessagesWaiting = uxSemaphoreCount - ( UBaseType_t ) 1;
+
+				#if ( configUSE_MUTEXES == 1 )
+				{
+					if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+					{
+						/* Record the information required to implement
+						priority inheritance should it become necessary. */
+						pxQueue->u.xSemaphore.xMutexHolder = pvTaskIncrementMutexHeldCount();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_MUTEXES */
+
+				/* Check to see if other tasks are blocked waiting to give the
+				semaphore, and if so, unblock the highest priority such task. */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						queueYIELD_IF_USING_PREEMPTION();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				taskEXIT_CRITICAL();
+				return pdPASS;
+			}
+			else
+			{
+				if( xTicksToWait == ( TickType_t ) 0 )
+				{
+					/* For inheritance to have occurred there must have been an
+					initial timeout, and an adjusted timeout cannot become 0, as
+					if it were 0 the function would have exited. */
+					#if( configUSE_MUTEXES == 1 )
+					{
+						configASSERT( xInheritanceOccurred == pdFALSE );
+					}
+					#endif /* configUSE_MUTEXES */
+
+					/* The semaphore count was 0 and no block time is specified
+					(or the block time has expired) so exit now. */
+					taskEXIT_CRITICAL();
+					traceQUEUE_RECEIVE_FAILED( pxQueue );
+					return errQUEUE_EMPTY;
+				}
+				else if( xEntryTimeSet == pdFALSE )
+				{
+					/* The semaphore count was 0 and a block time was specified
+					so configure the timeout structure ready to block. */
+					vTaskInternalSetTimeOutState( &xTimeOut );
+					xEntryTimeSet = pdTRUE;
+				}
+				else
+				{
+					/* Entry time was already set. */
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		/* Interrupts and other tasks can give to and take from the semaphore
+		now the critical section has been exited. */
+
+		vTaskSuspendAll();
+		prvLockQueue( pxQueue );
+
+		/* Update the timeout state to see if it has expired yet. */
+		if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+		{
+			/* A block time is specified and not expired.  If the semaphore
+			count is 0 then enter the Blocked state to wait for a semaphore to
+			become available.  As semaphores are implemented with queues the
+			queue being empty is equivalent to the semaphore count being 0. */
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
+
+				#if ( configUSE_MUTEXES == 1 )
+				{
+					if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+					{
+						taskENTER_CRITICAL();
+						{
+							xInheritanceOccurred = xTaskPriorityInherit( pxQueue->u.xSemaphore.xMutexHolder );
+						}
+						taskEXIT_CRITICAL();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif
+
+				vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
+				prvUnlockQueue( pxQueue );
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* There was no timeout and the semaphore count was not 0, so
+				attempt to take the semaphore again. */
+				prvUnlockQueue( pxQueue );
+				( void ) xTaskResumeAll();
+			}
+		}
+		else
+		{
+			/* Timed out. */
+			prvUnlockQueue( pxQueue );
+			( void ) xTaskResumeAll();
+
+			/* If the semaphore count is 0 exit now as the timeout has
+			expired.  Otherwise return to attempt to take the semaphore that is
+			known to be available.  As semaphores are implemented by queues the
+			queue being empty is equivalent to the semaphore count being 0. */
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				#if ( configUSE_MUTEXES == 1 )
+				{
+					/* xInheritanceOccurred could only have be set if
+					pxQueue->uxQueueType == queueQUEUE_IS_MUTEX so no need to
+					test the mutex type again to check it is actually a mutex. */
+					if( xInheritanceOccurred != pdFALSE )
+					{
+						taskENTER_CRITICAL();
+						{
+							UBaseType_t uxHighestWaitingPriority;
+
+							/* This task blocking on the mutex caused another
+							task to inherit this task's priority.  Now this task
+							has timed out the priority should be disinherited
+							again, but only as low as the next highest priority
+							task that is waiting for the same mutex. */
+							uxHighestWaitingPriority = prvGetDisinheritPriorityAfterTimeout( pxQueue );
+							vTaskPriorityDisinheritAfterTimeout( pxQueue->u.xSemaphore.xMutexHolder, uxHighestWaitingPriority );
+						}
+						taskEXIT_CRITICAL();
+					}
+				}
+				#endif /* configUSE_MUTEXES */
+
+				traceQUEUE_RECEIVE_FAILED( pxQueue );
+				return errQUEUE_EMPTY;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	} /*lint -restore */
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueuePeek( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait )
+{
+BaseType_t xEntryTimeSet = pdFALSE;
+TimeOut_t xTimeOut;
+int8_t *pcOriginalReadPosition;
+Queue_t * const pxQueue = xQueue;
+
+	/* Check the pointer is not NULL. */
+	configASSERT( ( pxQueue ) );
+
+	/* The buffer into which data is received can only be NULL if the data size
+	is zero (so no data is copied into the buffer. */
+	configASSERT( !( ( ( pvBuffer ) == NULL ) && ( ( pxQueue )->uxItemSize != ( UBaseType_t ) 0U ) ) );
+
+	/* Cannot block if the scheduler is suspended. */
+	#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+	{
+		configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+	}
+	#endif
+
+
+	/*lint -save -e904  This function relaxes the coding standard somewhat to
+	allow return statements within the function itself.  This is done in the
+	interest of execution time efficiency. */
+	for( ;; )
+	{
+		taskENTER_CRITICAL();
+		{
+			const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+			/* Is there data in the queue now?  To be running the calling task
+			must be the highest priority task wanting to access the queue. */
+			if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+			{
+				/* Remember the read position so it can be reset after the data
+				is read from the queue as this function is only peeking the
+				data, not removing it. */
+				pcOriginalReadPosition = pxQueue->u.xQueue.pcReadFrom;
+
+				prvCopyDataFromQueue( pxQueue, pvBuffer );
+				traceQUEUE_PEEK( pxQueue );
+
+				/* The data is not being removed, so reset the read pointer. */
+				pxQueue->u.xQueue.pcReadFrom = pcOriginalReadPosition;
+
+				/* The data is being left in the queue, so see if there are
+				any other tasks waiting for the data. */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						/* The task waiting has a higher priority than this task. */
+						queueYIELD_IF_USING_PREEMPTION();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				taskEXIT_CRITICAL();
+				return pdPASS;
+			}
+			else
+			{
+				if( xTicksToWait == ( TickType_t ) 0 )
+				{
+					/* The queue was empty and no block time is specified (or
+					the block time has expired) so leave now. */
+					taskEXIT_CRITICAL();
+					traceQUEUE_PEEK_FAILED( pxQueue );
+					return errQUEUE_EMPTY;
+				}
+				else if( xEntryTimeSet == pdFALSE )
+				{
+					/* The queue was empty and a block time was specified so
+					configure the timeout structure ready to enter the blocked
+					state. */
+					vTaskInternalSetTimeOutState( &xTimeOut );
+					xEntryTimeSet = pdTRUE;
+				}
+				else
+				{
+					/* Entry time was already set. */
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		/* Interrupts and other tasks can send to and receive from the queue
+		now the critical section has been exited. */
+
+		vTaskSuspendAll();
+		prvLockQueue( pxQueue );
+
+		/* Update the timeout state to see if it has expired yet. */
+		if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+		{
+			/* Timeout has not expired yet, check to see if there is data in the
+			queue now, and if not enter the Blocked state to wait for data. */
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				traceBLOCKING_ON_QUEUE_PEEK( pxQueue );
+				vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
+				prvUnlockQueue( pxQueue );
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* There is data in the queue now, so don't enter the blocked
+				state, instead return to try and obtain the data. */
+				prvUnlockQueue( pxQueue );
+				( void ) xTaskResumeAll();
+			}
+		}
+		else
+		{
+			/* The timeout has expired.  If there is still no data in the queue
+			exit, otherwise go back and try to read the data again. */
+			prvUnlockQueue( pxQueue );
+			( void ) xTaskResumeAll();
+
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				traceQUEUE_PEEK_FAILED( pxQueue );
+				return errQUEUE_EMPTY;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	} /*lint -restore */
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+		/* Cannot block in an ISR, so check there is data available. */
+		if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+		{
+			const int8_t cRxLock = pxQueue->cRxLock;
+
+			traceQUEUE_RECEIVE_FROM_ISR( pxQueue );
+
+			prvCopyDataFromQueue( pxQueue, pvBuffer );
+			pxQueue->uxMessagesWaiting = uxMessagesWaiting - ( UBaseType_t ) 1;
+
+			/* If the queue is locked the event list will not be modified.
+			Instead update the lock count so the task that unlocks the queue
+			will know that an ISR has removed data while the queue was
+			locked. */
+			if( cRxLock == queueUNLOCKED )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						/* The task waiting has a higher priority than us so
+						force a context switch. */
+						if( pxHigherPriorityTaskWoken != NULL )
+						{
+							*pxHigherPriorityTaskWoken = pdTRUE;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* Increment the lock count so the task that unlocks the queue
+				knows that data was removed while it was locked. */
+				pxQueue->cRxLock = ( int8_t ) ( cRxLock + 1 );
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+			traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue );
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue,  void * const pvBuffer )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+int8_t *pcOriginalReadPosition;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+	configASSERT( pxQueue->uxItemSize != 0 ); /* Can't peek a semaphore. */
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		/* Cannot block in an ISR, so check there is data available. */
+		if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+		{
+			traceQUEUE_PEEK_FROM_ISR( pxQueue );
+
+			/* Remember the read position so it can be reset as nothing is
+			actually being removed from the queue. */
+			pcOriginalReadPosition = pxQueue->u.xQueue.pcReadFrom;
+			prvCopyDataFromQueue( pxQueue, pvBuffer );
+			pxQueue->u.xQueue.pcReadFrom = pcOriginalReadPosition;
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+			traceQUEUE_PEEK_FROM_ISR_FAILED( pxQueue );
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+
+	configASSERT( xQueue );
+
+	taskENTER_CRITICAL();
+	{
+		uxReturn = ( ( Queue_t * ) xQueue )->uxMessagesWaiting;
+	}
+	taskEXIT_CRITICAL();
+
+	return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+
+	taskENTER_CRITICAL();
+	{
+		uxReturn = pxQueue->uxLength - pxQueue->uxMessagesWaiting;
+	}
+	taskEXIT_CRITICAL();
+
+	return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	uxReturn = pxQueue->uxMessagesWaiting;
+
+	return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+void vQueueDelete( QueueHandle_t xQueue )
+{
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	traceQUEUE_DELETE( pxQueue );
+
+	#if ( configQUEUE_REGISTRY_SIZE > 0 )
+	{
+		vQueueUnregisterQueue( pxQueue );
+	}
+	#endif
+
+	#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) )
+	{
+		/* The queue can only have been allocated dynamically - free it
+		again. */
+		vPortFree( pxQueue );
+	}
+	#elif( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+	{
+		/* The queue could have been allocated statically or dynamically, so
+		check before attempting to free the memory. */
+		if( pxQueue->ucStaticallyAllocated == ( uint8_t ) pdFALSE )
+		{
+			vPortFree( pxQueue );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#else
+	{
+		/* The queue must have been statically allocated, so is not going to be
+		deleted.  Avoid compiler warnings about the unused parameter. */
+		( void ) pxQueue;
+	}
+	#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue )
+	{
+		return ( ( Queue_t * ) xQueue )->uxQueueNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber )
+	{
+		( ( Queue_t * ) xQueue )->uxQueueNumber = uxQueueNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	uint8_t ucQueueGetQueueType( QueueHandle_t xQueue )
+	{
+		return ( ( Queue_t * ) xQueue )->ucQueueType;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_MUTEXES == 1 )
+
+	static UBaseType_t prvGetDisinheritPriorityAfterTimeout( const Queue_t * const pxQueue )
+	{
+	UBaseType_t uxHighestPriorityOfWaitingTasks;
+
+		/* If a task waiting for a mutex causes the mutex holder to inherit a
+		priority, but the waiting task times out, then the holder should
+		disinherit the priority - but only down to the highest priority of any
+		other tasks that are waiting for the same mutex.  For this purpose,
+		return the priority of the highest priority task that is waiting for the
+		mutex. */
+		if( listCURRENT_LIST_LENGTH( &( pxQueue->xTasksWaitingToReceive ) ) > 0U )
+		{
+			uxHighestPriorityOfWaitingTasks = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) listGET_ITEM_VALUE_OF_HEAD_ENTRY( &( pxQueue->xTasksWaitingToReceive ) );
+		}
+		else
+		{
+			uxHighestPriorityOfWaitingTasks = tskIDLE_PRIORITY;
+		}
+
+		return uxHighestPriorityOfWaitingTasks;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvCopyDataToQueue( Queue_t * const pxQueue, const void *pvItemToQueue, const BaseType_t xPosition )
+{
+BaseType_t xReturn = pdFALSE;
+UBaseType_t uxMessagesWaiting;
+
+	/* This function is called from a critical section. */
+
+	uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+	if( pxQueue->uxItemSize == ( UBaseType_t ) 0 )
+	{
+		#if ( configUSE_MUTEXES == 1 )
+		{
+			if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+			{
+				/* The mutex is no longer being held. */
+				xReturn = xTaskPriorityDisinherit( pxQueue->u.xSemaphore.xMutexHolder );
+				pxQueue->u.xSemaphore.xMutexHolder = NULL;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configUSE_MUTEXES */
+	}
+	else if( xPosition == queueSEND_TO_BACK )
+	{
+		( void ) memcpy( ( void * ) pxQueue->pcWriteTo, pvItemToQueue, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 !e418 !e9087 MISRA exception as the casts are only redundant for some ports, plus previous logic ensures a null pointer can only be passed to memcpy() if the copy size is 0.  Cast to void required by function signature and safe as no alignment requirement and copy length specified in bytes. */
+		pxQueue->pcWriteTo += pxQueue->uxItemSize; /*lint !e9016 Pointer arithmetic on char types ok, especially in this use case where it is the clearest way of conveying intent. */
+		if( pxQueue->pcWriteTo >= pxQueue->u.xQueue.pcTail ) /*lint !e946 MISRA exception justified as comparison of pointers is the cleanest solution. */
+		{
+			pxQueue->pcWriteTo = pxQueue->pcHead;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		( void ) memcpy( ( void * ) pxQueue->u.xQueue.pcReadFrom, pvItemToQueue, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 !e9087 !e418 MISRA exception as the casts are only redundant for some ports.  Cast to void required by function signature and safe as no alignment requirement and copy length specified in bytes.  Assert checks null pointer only used when length is 0. */
+		pxQueue->u.xQueue.pcReadFrom -= pxQueue->uxItemSize;
+		if( pxQueue->u.xQueue.pcReadFrom < pxQueue->pcHead ) /*lint !e946 MISRA exception justified as comparison of pointers is the cleanest solution. */
+		{
+			pxQueue->u.xQueue.pcReadFrom = ( pxQueue->u.xQueue.pcTail - pxQueue->uxItemSize );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		if( xPosition == queueOVERWRITE )
+		{
+			if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+			{
+				/* An item is not being added but overwritten, so subtract
+				one from the recorded number of items in the queue so when
+				one is added again below the number of recorded items remains
+				correct. */
+				--uxMessagesWaiting;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+	pxQueue->uxMessagesWaiting = uxMessagesWaiting + ( UBaseType_t ) 1;
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCopyDataFromQueue( Queue_t * const pxQueue, void * const pvBuffer )
+{
+	if( pxQueue->uxItemSize != ( UBaseType_t ) 0 )
+	{
+		pxQueue->u.xQueue.pcReadFrom += pxQueue->uxItemSize; /*lint !e9016 Pointer arithmetic on char types ok, especially in this use case where it is the clearest way of conveying intent. */
+		if( pxQueue->u.xQueue.pcReadFrom >= pxQueue->u.xQueue.pcTail ) /*lint !e946 MISRA exception justified as use of the relational operator is the cleanest solutions. */
+		{
+			pxQueue->u.xQueue.pcReadFrom = pxQueue->pcHead;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+		( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.xQueue.pcReadFrom, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 !e418 !e9087 MISRA exception as the casts are only redundant for some ports.  Also previous logic ensures a null pointer can only be passed to memcpy() when the count is 0.  Cast to void required by function signature and safe as no alignment requirement and copy length specified in bytes. */
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvUnlockQueue( Queue_t * const pxQueue )
+{
+	/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. */
+
+	/* The lock counts contains the number of extra data items placed or
+	removed from the queue while the queue was locked.  When a queue is
+	locked items can be added or removed, but the event lists cannot be
+	updated. */
+	taskENTER_CRITICAL();
+	{
+		int8_t cTxLock = pxQueue->cTxLock;
+
+		/* See if data was added to the queue while it was locked. */
+		while( cTxLock > queueLOCKED_UNMODIFIED )
+		{
+			/* Data was posted while the queue was locked.  Are any tasks
+			blocked waiting for data to become available? */
+			#if ( configUSE_QUEUE_SETS == 1 )
+			{
+				if( pxQueue->pxQueueSetContainer != NULL )
+				{
+					if( prvNotifyQueueSetContainer( pxQueue ) != pdFALSE )
+					{
+						/* The queue is a member of a queue set, and posting to
+						the queue set caused a higher priority task to unblock.
+						A context switch is required. */
+						vTaskMissedYield();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					/* Tasks that are removed from the event list will get
+					added to the pending ready list as the scheduler is still
+					suspended. */
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The task waiting has a higher priority so record that a
+							context	switch is required. */
+							vTaskMissedYield();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						break;
+					}
+				}
+			}
+			#else /* configUSE_QUEUE_SETS */
+			{
+				/* Tasks that are removed from the event list will get added to
+				the pending ready list as the scheduler is still suspended. */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						/* The task waiting has a higher priority so record that
+						a context switch is required. */
+						vTaskMissedYield();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					break;
+				}
+			}
+			#endif /* configUSE_QUEUE_SETS */
+
+			--cTxLock;
+		}
+
+		pxQueue->cTxLock = queueUNLOCKED;
+	}
+	taskEXIT_CRITICAL();
+
+	/* Do the same for the Rx lock. */
+	taskENTER_CRITICAL();
+	{
+		int8_t cRxLock = pxQueue->cRxLock;
+
+		while( cRxLock > queueLOCKED_UNMODIFIED )
+		{
+			if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+			{
+				if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+				{
+					vTaskMissedYield();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				--cRxLock;
+			}
+			else
+			{
+				break;
+			}
+		}
+
+		pxQueue->cRxLock = queueUNLOCKED;
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvIsQueueEmpty( const Queue_t *pxQueue )
+{
+BaseType_t xReturn;
+
+	taskENTER_CRITICAL();
+	{
+		if( pxQueue->uxMessagesWaiting == ( UBaseType_t )  0 )
+		{
+			xReturn = pdTRUE;
+		}
+		else
+		{
+			xReturn = pdFALSE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue )
+{
+BaseType_t xReturn;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0 )
+	{
+		xReturn = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvIsQueueFull( const Queue_t *pxQueue )
+{
+BaseType_t xReturn;
+
+	taskENTER_CRITICAL();
+	{
+		if( pxQueue->uxMessagesWaiting == pxQueue->uxLength )
+		{
+			xReturn = pdTRUE;
+		}
+		else
+		{
+			xReturn = pdFALSE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue )
+{
+BaseType_t xReturn;
+Queue_t * const pxQueue = xQueue;
+
+	configASSERT( pxQueue );
+	if( pxQueue->uxMessagesWaiting == pxQueue->uxLength )
+	{
+		xReturn = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRSend( QueueHandle_t xQueue, const void *pvItemToQueue, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueue = xQueue;
+
+		/* If the queue is already full we may have to block.  A critical section
+		is required to prevent an interrupt removing something from the queue
+		between the check to see if the queue is full and blocking on the queue. */
+		portDISABLE_INTERRUPTS();
+		{
+			if( prvIsQueueFull( pxQueue ) != pdFALSE )
+			{
+				/* The queue is full - do we want to block or just leave without
+				posting? */
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					/* As this is called from a coroutine we cannot block directly, but
+					return indicating that we need to block. */
+					vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToSend ) );
+					portENABLE_INTERRUPTS();
+					return errQUEUE_BLOCKED;
+				}
+				else
+				{
+					portENABLE_INTERRUPTS();
+					return errQUEUE_FULL;
+				}
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		portDISABLE_INTERRUPTS();
+		{
+			if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+			{
+				/* There is room in the queue, copy the data into the queue. */
+				prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+				xReturn = pdPASS;
+
+				/* Were any co-routines waiting for data to become available? */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					/* In this instance the co-routine could be placed directly
+					into the ready list as we are within a critical section.
+					Instead the same pending ready list mechanism is used as if
+					the event were caused from within an interrupt. */
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						/* The co-routine waiting has a higher priority so record
+						that a yield might be appropriate. */
+						xReturn = errQUEUE_YIELD;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				xReturn = errQUEUE_FULL;
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRReceive( QueueHandle_t xQueue, void *pvBuffer, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueue = xQueue;
+
+		/* If the queue is already empty we may have to block.  A critical section
+		is required to prevent an interrupt adding something to the queue
+		between the check to see if the queue is empty and blocking on the queue. */
+		portDISABLE_INTERRUPTS();
+		{
+			if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0 )
+			{
+				/* There are no messages in the queue, do we want to block or just
+				leave with nothing? */
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					/* As this is a co-routine we cannot block directly, but return
+					indicating that we need to block. */
+					vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToReceive ) );
+					portENABLE_INTERRUPTS();
+					return errQUEUE_BLOCKED;
+				}
+				else
+				{
+					portENABLE_INTERRUPTS();
+					return errQUEUE_FULL;
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		portDISABLE_INTERRUPTS();
+		{
+			if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+			{
+				/* Data is available from the queue. */
+				pxQueue->u.xQueue.pcReadFrom += pxQueue->uxItemSize;
+				if( pxQueue->u.xQueue.pcReadFrom >= pxQueue->u.xQueue.pcTail )
+				{
+					pxQueue->u.xQueue.pcReadFrom = pxQueue->pcHead;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+				--( pxQueue->uxMessagesWaiting );
+				( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.xQueue.pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+				xReturn = pdPASS;
+
+				/* Were any co-routines waiting for space to become available? */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					/* In this instance the co-routine could be placed directly
+					into the ready list as we are within a critical section.
+					Instead the same pending ready list mechanism is used as if
+					the event were caused from within an interrupt. */
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						xReturn = errQUEUE_YIELD;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				xReturn = pdFAIL;
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRSendFromISR( QueueHandle_t xQueue, const void *pvItemToQueue, BaseType_t xCoRoutinePreviouslyWoken )
+	{
+	Queue_t * const pxQueue = xQueue;
+
+		/* Cannot block within an ISR so if there is no space on the queue then
+		exit without doing anything. */
+		if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+		{
+			prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+
+			/* We only want to wake one co-routine per ISR, so check that a
+			co-routine has not already been woken. */
+			if( xCoRoutinePreviouslyWoken == pdFALSE )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						return pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xCoRoutinePreviouslyWoken;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRReceiveFromISR( QueueHandle_t xQueue, void *pvBuffer, BaseType_t *pxCoRoutineWoken )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueue = xQueue;
+
+		/* We cannot block from an ISR, so check there is data available. If
+		not then just leave without doing anything. */
+		if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+		{
+			/* Copy the data from the queue. */
+			pxQueue->u.xQueue.pcReadFrom += pxQueue->uxItemSize;
+			if( pxQueue->u.xQueue.pcReadFrom >= pxQueue->u.xQueue.pcTail )
+			{
+				pxQueue->u.xQueue.pcReadFrom = pxQueue->pcHead;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+			--( pxQueue->uxMessagesWaiting );
+			( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.xQueue.pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+			if( ( *pxCoRoutineWoken ) == pdFALSE )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						*pxCoRoutineWoken = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcQueueName ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	UBaseType_t ux;
+
+		/* See if there is an empty space in the registry.  A NULL name denotes
+		a free slot. */
+		for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+		{
+			if( xQueueRegistry[ ux ].pcQueueName == NULL )
+			{
+				/* Store the information on this queue. */
+				xQueueRegistry[ ux ].pcQueueName = pcQueueName;
+				xQueueRegistry[ ux ].xHandle = xQueue;
+
+				traceQUEUE_REGISTRY_ADD( xQueue, pcQueueName );
+				break;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	}
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	const char *pcQueueGetName( QueueHandle_t xQueue ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	UBaseType_t ux;
+	const char *pcReturn = NULL; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+		/* Note there is nothing here to protect against another task adding or
+		removing entries from the registry while it is being searched. */
+		for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+		{
+			if( xQueueRegistry[ ux ].xHandle == xQueue )
+			{
+				pcReturn = xQueueRegistry[ ux ].pcQueueName;
+				break;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		return pcReturn;
+	} /*lint !e818 xQueue cannot be a pointer to const because it is a typedef. */
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	void vQueueUnregisterQueue( QueueHandle_t xQueue )
+	{
+	UBaseType_t ux;
+
+		/* See if the handle of the queue being unregistered in actually in the
+		registry. */
+		for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+		{
+			if( xQueueRegistry[ ux ].xHandle == xQueue )
+			{
+				/* Set the name to NULL to show that this slot if free again. */
+				xQueueRegistry[ ux ].pcQueueName = NULL;
+
+				/* Set the handle to NULL to ensure the same queue handle cannot
+				appear in the registry twice if it is added, removed, then
+				added again. */
+				xQueueRegistry[ ux ].xHandle = ( QueueHandle_t ) 0;
+				break;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+	} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TIMERS == 1 )
+
+	void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely )
+	{
+	Queue_t * const pxQueue = xQueue;
+
+		/* This function should not be called by application code hence the
+		'Restricted' in its name.  It is not part of the public API.  It is
+		designed for use by kernel code, and has special calling requirements.
+		It can result in vListInsert() being called on a list that can only
+		possibly ever have one item in it, so the list will be fast, but even
+		so it should be called with the scheduler locked and not from a critical
+		section. */
+
+		/* Only do anything if there are no messages in the queue.  This function
+		will not actually cause the task to block, just place it on a blocked
+		list.  It will not block until the scheduler is unlocked - at which
+		time a yield will be performed.  If an item is added to the queue while
+		the queue is locked, and the calling task blocks on the queue, then the
+		calling task will be immediately unblocked when the queue is unlocked. */
+		prvLockQueue( pxQueue );
+		if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0U )
+		{
+			/* There is nothing in the queue, block for the specified period. */
+			vTaskPlaceOnEventListRestricted( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait, xWaitIndefinitely );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+		prvUnlockQueue( pxQueue );
+	}
+
+#endif /* configUSE_TIMERS */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_QUEUE_SETS == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength )
+	{
+	QueueSetHandle_t pxQueue;
+
+		pxQueue = xQueueGenericCreate( uxEventQueueLength, ( UBaseType_t ) sizeof( Queue_t * ), queueQUEUE_TYPE_SET );
+
+		return pxQueue;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet )
+	{
+	BaseType_t xReturn;
+
+		taskENTER_CRITICAL();
+		{
+			if( ( ( Queue_t * ) xQueueOrSemaphore )->pxQueueSetContainer != NULL )
+			{
+				/* Cannot add a queue/semaphore to more than one queue set. */
+				xReturn = pdFAIL;
+			}
+			else if( ( ( Queue_t * ) xQueueOrSemaphore )->uxMessagesWaiting != ( UBaseType_t ) 0 )
+			{
+				/* Cannot add a queue/semaphore to a queue set if there are already
+				items in the queue/semaphore. */
+				xReturn = pdFAIL;
+			}
+			else
+			{
+				( ( Queue_t * ) xQueueOrSemaphore )->pxQueueSetContainer = xQueueSet;
+				xReturn = pdPASS;
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueueOrSemaphore = ( Queue_t * ) xQueueOrSemaphore;
+
+		if( pxQueueOrSemaphore->pxQueueSetContainer != xQueueSet )
+		{
+			/* The queue was not a member of the set. */
+			xReturn = pdFAIL;
+		}
+		else if( pxQueueOrSemaphore->uxMessagesWaiting != ( UBaseType_t ) 0 )
+		{
+			/* It is dangerous to remove a queue from a set when the queue is
+			not empty because the queue set will still hold pending events for
+			the queue. */
+			xReturn = pdFAIL;
+		}
+		else
+		{
+			taskENTER_CRITICAL();
+			{
+				/* The queue is no longer contained in the set. */
+				pxQueueOrSemaphore->pxQueueSetContainer = NULL;
+			}
+			taskEXIT_CRITICAL();
+			xReturn = pdPASS;
+		}
+
+		return xReturn;
+	} /*lint !e818 xQueueSet could not be declared as pointing to const as it is a typedef. */
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, TickType_t const xTicksToWait )
+	{
+	QueueSetMemberHandle_t xReturn = NULL;
+
+		( void ) xQueueReceive( ( QueueHandle_t ) xQueueSet, &xReturn, xTicksToWait ); /*lint !e961 Casting from one typedef to another is not redundant. */
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet )
+	{
+	QueueSetMemberHandle_t xReturn = NULL;
+
+		( void ) xQueueReceiveFromISR( ( QueueHandle_t ) xQueueSet, &xReturn, NULL ); /*lint !e961 Casting from one typedef to another is not redundant. */
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	static BaseType_t prvNotifyQueueSetContainer( const Queue_t * const pxQueue )
+	{
+	Queue_t *pxQueueSetContainer = pxQueue->pxQueueSetContainer;
+	BaseType_t xReturn = pdFALSE;
+
+		/* This function must be called form a critical section. */
+
+		configASSERT( pxQueueSetContainer );
+		configASSERT( pxQueueSetContainer->uxMessagesWaiting < pxQueueSetContainer->uxLength );
+
+		if( pxQueueSetContainer->uxMessagesWaiting < pxQueueSetContainer->uxLength )
+		{
+			const int8_t cTxLock = pxQueueSetContainer->cTxLock;
+
+			traceQUEUE_SEND( pxQueueSetContainer );
+
+			/* The data copied is the handle of the queue that contains data. */
+			xReturn = prvCopyDataToQueue( pxQueueSetContainer, &pxQueue, queueSEND_TO_BACK );
+
+			if( cTxLock == queueUNLOCKED )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueueSetContainer->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueueSetContainer->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						/* The task waiting has a higher priority. */
+						xReturn = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				pxQueueSetContainer->cTxLock = ( int8_t ) ( cTxLock + 1 );
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c
new file mode 100644
index 0000000..c88e4ea
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c
@@ -0,0 +1,1263 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/* Standard includes. */
+#include 
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* FreeRTOS includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "stream_buffer.h"
+
+#if( configUSE_TASK_NOTIFICATIONS != 1 )
+	#error configUSE_TASK_NOTIFICATIONS must be set to 1 to build stream_buffer.c
+#endif
+
+/* Lint e961, e9021 and e750 are suppressed as a MISRA exception justified
+because the MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined
+for the header files above, but not in this file, in order to generate the
+correct privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750 !e9021. */
+
+/* If the user has not provided application specific Rx notification macros,
+or #defined the notification macros away, them provide default implementations
+that uses task notifications. */
+/*lint -save -e9026 Function like macros allowed and needed here so they can be overidden. */
+#ifndef sbRECEIVE_COMPLETED
+	#define sbRECEIVE_COMPLETED( pxStreamBuffer )										\
+		vTaskSuspendAll();																\
+		{																				\
+			if( ( pxStreamBuffer )->xTaskWaitingToSend != NULL )						\
+			{																			\
+				( void ) xTaskNotify( ( pxStreamBuffer )->xTaskWaitingToSend,			\
+									  ( uint32_t ) 0,									\
+									  eNoAction );										\
+				( pxStreamBuffer )->xTaskWaitingToSend = NULL;							\
+			}																			\
+		}																				\
+		( void ) xTaskResumeAll();
+#endif /* sbRECEIVE_COMPLETED */
+
+#ifndef sbRECEIVE_COMPLETED_FROM_ISR
+	#define sbRECEIVE_COMPLETED_FROM_ISR( pxStreamBuffer,								\
+										  pxHigherPriorityTaskWoken )					\
+	{																					\
+	UBaseType_t uxSavedInterruptStatus;													\
+																						\
+		uxSavedInterruptStatus = ( UBaseType_t ) portSET_INTERRUPT_MASK_FROM_ISR();		\
+		{																				\
+			if( ( pxStreamBuffer )->xTaskWaitingToSend != NULL )						\
+			{																			\
+				( void ) xTaskNotifyFromISR( ( pxStreamBuffer )->xTaskWaitingToSend,	\
+											 ( uint32_t ) 0,							\
+											 eNoAction,									\
+											 pxHigherPriorityTaskWoken );				\
+				( pxStreamBuffer )->xTaskWaitingToSend = NULL;							\
+			}																			\
+		}																				\
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );					\
+	}
+#endif /* sbRECEIVE_COMPLETED_FROM_ISR */
+
+/* If the user has not provided an application specific Tx notification macro,
+or #defined the notification macro away, them provide a default implementation
+that uses task notifications. */
+#ifndef sbSEND_COMPLETED
+	#define sbSEND_COMPLETED( pxStreamBuffer )											\
+		vTaskSuspendAll();																\
+		{																				\
+			if( ( pxStreamBuffer )->xTaskWaitingToReceive != NULL )						\
+			{																			\
+				( void ) xTaskNotify( ( pxStreamBuffer )->xTaskWaitingToReceive,		\
+									  ( uint32_t ) 0,									\
+									  eNoAction );										\
+				( pxStreamBuffer )->xTaskWaitingToReceive = NULL;						\
+			}																			\
+		}																				\
+		( void ) xTaskResumeAll();
+#endif /* sbSEND_COMPLETED */
+
+#ifndef sbSEND_COMPLETE_FROM_ISR
+	#define sbSEND_COMPLETE_FROM_ISR( pxStreamBuffer, pxHigherPriorityTaskWoken )		\
+	{																					\
+	UBaseType_t uxSavedInterruptStatus;													\
+																						\
+		uxSavedInterruptStatus = ( UBaseType_t ) portSET_INTERRUPT_MASK_FROM_ISR();		\
+		{																				\
+			if( ( pxStreamBuffer )->xTaskWaitingToReceive != NULL )						\
+			{																			\
+				( void ) xTaskNotifyFromISR( ( pxStreamBuffer )->xTaskWaitingToReceive,	\
+											 ( uint32_t ) 0,							\
+											 eNoAction,									\
+											 pxHigherPriorityTaskWoken );				\
+				( pxStreamBuffer )->xTaskWaitingToReceive = NULL;						\
+			}																			\
+		}																				\
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );					\
+	}
+#endif /* sbSEND_COMPLETE_FROM_ISR */
+/*lint -restore (9026) */
+
+/* The number of bytes used to hold the length of a message in the buffer. */
+#define sbBYTES_TO_STORE_MESSAGE_LENGTH ( sizeof( configMESSAGE_BUFFER_LENGTH_TYPE ) )
+
+/* Bits stored in the ucFlags field of the stream buffer. */
+#define sbFLAGS_IS_MESSAGE_BUFFER		( ( uint8_t ) 1 ) /* Set if the stream buffer was created as a message buffer, in which case it holds discrete messages rather than a stream. */
+#define sbFLAGS_IS_STATICALLY_ALLOCATED ( ( uint8_t ) 2 ) /* Set if the stream buffer was created using statically allocated memory. */
+
+/*-----------------------------------------------------------*/
+
+/* Structure that hold state information on the buffer. */
+typedef struct StreamBufferDef_t /*lint !e9058 Style convention uses tag. */
+{
+	volatile size_t xTail;				/* Index to the next item to read within the buffer. */
+	volatile size_t xHead;				/* Index to the next item to write within the buffer. */
+	size_t xLength;						/* The length of the buffer pointed to by pucBuffer. */
+	size_t xTriggerLevelBytes;			/* The number of bytes that must be in the stream buffer before a task that is waiting for data is unblocked. */
+	volatile TaskHandle_t xTaskWaitingToReceive; /* Holds the handle of a task waiting for data, or NULL if no tasks are waiting. */
+	volatile TaskHandle_t xTaskWaitingToSend;	/* Holds the handle of a task waiting to send data to a message buffer that is full. */
+	uint8_t *pucBuffer;					/* Points to the buffer itself - that is - the RAM that stores the data passed through the buffer. */
+	uint8_t ucFlags;
+
+	#if ( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t uxStreamBufferNumber;		/* Used for tracing purposes. */
+	#endif
+} StreamBuffer_t;
+
+/*
+ * The number of bytes available to be read from the buffer.
+ */
+static size_t prvBytesInBuffer( const StreamBuffer_t * const pxStreamBuffer ) PRIVILEGED_FUNCTION;
+
+/*
+ * Add xCount bytes from pucData into the pxStreamBuffer message buffer.
+ * Returns the number of bytes written, which will either equal xCount in the
+ * success case, or 0 if there was not enough space in the buffer (in which case
+ * no data is written into the buffer).
+ */
+static size_t prvWriteBytesToBuffer( StreamBuffer_t * const pxStreamBuffer, const uint8_t *pucData, size_t xCount ) PRIVILEGED_FUNCTION;
+
+/*
+ * If the stream buffer is being used as a message buffer, then reads an entire
+ * message out of the buffer.  If the stream buffer is being used as a stream
+ * buffer then read as many bytes as possible from the buffer.
+ * prvReadBytesFromBuffer() is called to actually extract the bytes from the
+ * buffer's data storage area.
+ */
+static size_t prvReadMessageFromBuffer( StreamBuffer_t *pxStreamBuffer,
+										void *pvRxData,
+										size_t xBufferLengthBytes,
+										size_t xBytesAvailable,
+										size_t xBytesToStoreMessageLength ) PRIVILEGED_FUNCTION;
+
+/*
+ * If the stream buffer is being used as a message buffer, then writes an entire
+ * message to the buffer.  If the stream buffer is being used as a stream
+ * buffer then write as many bytes as possible to the buffer.
+ * prvWriteBytestoBuffer() is called to actually send the bytes to the buffer's
+ * data storage area.
+ */
+static size_t prvWriteMessageToBuffer(  StreamBuffer_t * const pxStreamBuffer,
+										const void * pvTxData,
+										size_t xDataLengthBytes,
+										size_t xSpace,
+										size_t xRequiredSpace ) PRIVILEGED_FUNCTION;
+
+/*
+ * Read xMaxCount bytes from the pxStreamBuffer message buffer and write them
+ * to pucData.
+ */
+static size_t prvReadBytesFromBuffer( StreamBuffer_t *pxStreamBuffer,
+									  uint8_t *pucData,
+									  size_t xMaxCount,
+									  size_t xBytesAvailable ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called by both pxStreamBufferCreate() and pxStreamBufferCreateStatic() to
+ * initialise the members of the newly created stream buffer structure.
+ */
+static void prvInitialiseNewStreamBuffer( StreamBuffer_t * const pxStreamBuffer,
+										  uint8_t * const pucBuffer,
+										  size_t xBufferSizeBytes,
+										  size_t xTriggerLevelBytes,
+										  uint8_t ucFlags ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+	StreamBufferHandle_t xStreamBufferGenericCreate( size_t xBufferSizeBytes, size_t xTriggerLevelBytes, BaseType_t xIsMessageBuffer )
+	{
+	uint8_t *pucAllocatedMemory;
+	uint8_t ucFlags;
+
+		/* In case the stream buffer is going to be used as a message buffer
+		(that is, it will hold discrete messages with a little meta data that
+		says how big the next message is) check the buffer will be large enough
+		to hold at least one message. */
+		if( xIsMessageBuffer == pdTRUE )
+		{
+			/* Is a message buffer but not statically allocated. */
+			ucFlags = sbFLAGS_IS_MESSAGE_BUFFER;
+			configASSERT( xBufferSizeBytes > sbBYTES_TO_STORE_MESSAGE_LENGTH );
+		}
+		else
+		{
+			/* Not a message buffer and not statically allocated. */
+			ucFlags = 0;
+			configASSERT( xBufferSizeBytes > 0 );
+		}
+		configASSERT( xTriggerLevelBytes <= xBufferSizeBytes );
+
+		/* A trigger level of 0 would cause a waiting task to unblock even when
+		the buffer was empty. */
+		if( xTriggerLevelBytes == ( size_t ) 0 )
+		{
+			xTriggerLevelBytes = ( size_t ) 1;
+		}
+
+		/* A stream buffer requires a StreamBuffer_t structure and a buffer.
+		Both are allocated in a single call to pvPortMalloc().  The
+		StreamBuffer_t structure is placed at the start of the allocated memory
+		and the buffer follows immediately after.  The requested size is
+		incremented so the free space is returned as the user would expect -
+		this is a quirk of the implementation that means otherwise the free
+		space would be reported as one byte smaller than would be logically
+		expected. */
+		xBufferSizeBytes++;
+		pucAllocatedMemory = ( uint8_t * ) pvPortMalloc( xBufferSizeBytes + sizeof( StreamBuffer_t ) ); /*lint !e9079 malloc() only returns void*. */
+
+		if( pucAllocatedMemory != NULL )
+		{
+			prvInitialiseNewStreamBuffer( ( StreamBuffer_t * ) pucAllocatedMemory, /* Structure at the start of the allocated memory. */ /*lint !e9087 Safe cast as allocated memory is aligned. */ /*lint !e826 Area is not too small and alignment is guaranteed provided malloc() behaves as expected and returns aligned buffer. */
+										   pucAllocatedMemory + sizeof( StreamBuffer_t ),  /* Storage area follows. */ /*lint !e9016 Indexing past structure valid for uint8_t pointer, also storage area has no alignment requirement. */
+										   xBufferSizeBytes,
+										   xTriggerLevelBytes,
+										   ucFlags );
+
+			traceSTREAM_BUFFER_CREATE( ( ( StreamBuffer_t * ) pucAllocatedMemory ), xIsMessageBuffer );
+		}
+		else
+		{
+			traceSTREAM_BUFFER_CREATE_FAILED( xIsMessageBuffer );
+		}
+
+		return ( StreamBufferHandle_t ) pucAllocatedMemory; /*lint !e9087 !e826 Safe cast as allocated memory is aligned. */
+	}
+
+#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	StreamBufferHandle_t xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes,
+														   size_t xTriggerLevelBytes,
+														   BaseType_t xIsMessageBuffer,
+														   uint8_t * const pucStreamBufferStorageArea,
+														   StaticStreamBuffer_t * const pxStaticStreamBuffer )
+	{
+	StreamBuffer_t * const pxStreamBuffer = ( StreamBuffer_t * ) pxStaticStreamBuffer; /*lint !e740 !e9087 Safe cast as StaticStreamBuffer_t is opaque Streambuffer_t. */
+	StreamBufferHandle_t xReturn;
+	uint8_t ucFlags;
+
+		configASSERT( pucStreamBufferStorageArea );
+		configASSERT( pxStaticStreamBuffer );
+		configASSERT( xTriggerLevelBytes <= xBufferSizeBytes );
+
+		/* A trigger level of 0 would cause a waiting task to unblock even when
+		the buffer was empty. */
+		if( xTriggerLevelBytes == ( size_t ) 0 )
+		{
+			xTriggerLevelBytes = ( size_t ) 1;
+		}
+
+		if( xIsMessageBuffer != pdFALSE )
+		{
+			/* Statically allocated message buffer. */
+			ucFlags = sbFLAGS_IS_MESSAGE_BUFFER | sbFLAGS_IS_STATICALLY_ALLOCATED;
+		}
+		else
+		{
+			/* Statically allocated stream buffer. */
+			ucFlags = sbFLAGS_IS_STATICALLY_ALLOCATED;
+		}
+
+		/* In case the stream buffer is going to be used as a message buffer
+		(that is, it will hold discrete messages with a little meta data that
+		says how big the next message is) check the buffer will be large enough
+		to hold at least one message. */
+		configASSERT( xBufferSizeBytes > sbBYTES_TO_STORE_MESSAGE_LENGTH );
+
+		#if( configASSERT_DEFINED == 1 )
+		{
+			/* Sanity check that the size of the structure used to declare a
+			variable of type StaticStreamBuffer_t equals the size of the real
+			message buffer structure. */
+			volatile size_t xSize = sizeof( StaticStreamBuffer_t );
+			configASSERT( xSize == sizeof( StreamBuffer_t ) );
+		} /*lint !e529 xSize is referenced is configASSERT() is defined. */
+		#endif /* configASSERT_DEFINED */
+
+		if( ( pucStreamBufferStorageArea != NULL ) && ( pxStaticStreamBuffer != NULL ) )
+		{
+			prvInitialiseNewStreamBuffer( pxStreamBuffer,
+										  pucStreamBufferStorageArea,
+										  xBufferSizeBytes,
+										  xTriggerLevelBytes,
+										  ucFlags );
+
+			/* Remember this was statically allocated in case it is ever deleted
+			again. */
+			pxStreamBuffer->ucFlags |= sbFLAGS_IS_STATICALLY_ALLOCATED;
+
+			traceSTREAM_BUFFER_CREATE( pxStreamBuffer, xIsMessageBuffer );
+
+			xReturn = ( StreamBufferHandle_t ) pxStaticStreamBuffer; /*lint !e9087 Data hiding requires cast to opaque type. */
+		}
+		else
+		{
+			xReturn = NULL;
+			traceSTREAM_BUFFER_CREATE_STATIC_FAILED( xReturn, xIsMessageBuffer );
+		}
+
+		return xReturn;
+	}
+
+#endif /* ( configSUPPORT_STATIC_ALLOCATION == 1 ) */
+/*-----------------------------------------------------------*/
+
+void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer )
+{
+StreamBuffer_t * pxStreamBuffer = xStreamBuffer;
+
+	configASSERT( pxStreamBuffer );
+
+	traceSTREAM_BUFFER_DELETE( xStreamBuffer );
+
+	if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_STATICALLY_ALLOCATED ) == ( uint8_t ) pdFALSE )
+	{
+		#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+		{
+			/* Both the structure and the buffer were allocated using a single call
+			to pvPortMalloc(), hence only one call to vPortFree() is required. */
+			vPortFree( ( void * ) pxStreamBuffer ); /*lint !e9087 Standard free() semantics require void *, plus pxStreamBuffer was allocated by pvPortMalloc(). */
+		}
+		#else
+		{
+			/* Should not be possible to get here, ucFlags must be corrupt.
+			Force an assert. */
+			configASSERT( xStreamBuffer == ( StreamBufferHandle_t ) ~0 );
+		}
+		#endif
+	}
+	else
+	{
+		/* The structure and buffer were not allocated dynamically and cannot be
+		freed - just scrub the structure so future use will assert. */
+		( void ) memset( pxStreamBuffer, 0x00, sizeof( StreamBuffer_t ) );
+	}
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+BaseType_t xReturn = pdFAIL;
+
+#if( configUSE_TRACE_FACILITY == 1 )
+	UBaseType_t uxStreamBufferNumber;
+#endif
+
+	configASSERT( pxStreamBuffer );
+
+	#if( configUSE_TRACE_FACILITY == 1 )
+	{
+		/* Store the stream buffer number so it can be restored after the
+		reset. */
+		uxStreamBufferNumber = pxStreamBuffer->uxStreamBufferNumber;
+	}
+	#endif
+
+	/* Can only reset a message buffer if there are no tasks blocked on it. */
+	taskENTER_CRITICAL();
+	{
+		if( pxStreamBuffer->xTaskWaitingToReceive == NULL )
+		{
+			if( pxStreamBuffer->xTaskWaitingToSend == NULL )
+			{
+				prvInitialiseNewStreamBuffer( pxStreamBuffer,
+											  pxStreamBuffer->pucBuffer,
+											  pxStreamBuffer->xLength,
+											  pxStreamBuffer->xTriggerLevelBytes,
+											  pxStreamBuffer->ucFlags );
+				xReturn = pdPASS;
+
+				#if( configUSE_TRACE_FACILITY == 1 )
+				{
+					pxStreamBuffer->uxStreamBufferNumber = uxStreamBufferNumber;
+				}
+				#endif
+
+				traceSTREAM_BUFFER_RESET( xStreamBuffer );
+			}
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+BaseType_t xReturn;
+
+	configASSERT( pxStreamBuffer );
+
+	/* It is not valid for the trigger level to be 0. */
+	if( xTriggerLevel == ( size_t ) 0 )
+	{
+		xTriggerLevel = ( size_t ) 1;
+	}
+
+	/* The trigger level is the number of bytes that must be in the stream
+	buffer before a task that is waiting for data is unblocked. */
+	if( xTriggerLevel <= pxStreamBuffer->xLength )
+	{
+		pxStreamBuffer->xTriggerLevelBytes = xTriggerLevel;
+		xReturn = pdPASS;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer )
+{
+const StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+size_t xSpace;
+
+	configASSERT( pxStreamBuffer );
+
+	xSpace = pxStreamBuffer->xLength + pxStreamBuffer->xTail;
+	xSpace -= pxStreamBuffer->xHead;
+	xSpace -= ( size_t ) 1;
+
+	if( xSpace >= pxStreamBuffer->xLength )
+	{
+		xSpace -= pxStreamBuffer->xLength;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	return xSpace;
+}
+/*-----------------------------------------------------------*/
+
+size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer )
+{
+const StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+size_t xReturn;
+
+	configASSERT( pxStreamBuffer );
+
+	xReturn = prvBytesInBuffer( pxStreamBuffer );
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
+						  const void *pvTxData,
+						  size_t xDataLengthBytes,
+						  TickType_t xTicksToWait )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+size_t xReturn, xSpace = 0;
+size_t xRequiredSpace = xDataLengthBytes;
+TimeOut_t xTimeOut;
+
+	configASSERT( pvTxData );
+	configASSERT( pxStreamBuffer );
+
+	/* This send function is used to write to both message buffers and stream
+	buffers.  If this is a message buffer then the space needed must be
+	increased by the amount of bytes needed to store the length of the
+	message. */
+	if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER ) != ( uint8_t ) 0 )
+	{
+		xRequiredSpace += sbBYTES_TO_STORE_MESSAGE_LENGTH;
+
+		/* Overflow? */
+		configASSERT( xRequiredSpace > xDataLengthBytes );
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	if( xTicksToWait != ( TickType_t ) 0 )
+	{
+		vTaskSetTimeOutState( &xTimeOut );
+
+		do
+		{
+			/* Wait until the required number of bytes are free in the message
+			buffer. */
+			taskENTER_CRITICAL();
+			{
+				xSpace = xStreamBufferSpacesAvailable( pxStreamBuffer );
+
+				if( xSpace < xRequiredSpace )
+				{
+					/* Clear notification state as going to wait for space. */
+					( void ) xTaskNotifyStateClear( NULL );
+
+					/* Should only be one writer. */
+					configASSERT( pxStreamBuffer->xTaskWaitingToSend == NULL );
+					pxStreamBuffer->xTaskWaitingToSend = xTaskGetCurrentTaskHandle();
+				}
+				else
+				{
+					taskEXIT_CRITICAL();
+					break;
+				}
+			}
+			taskEXIT_CRITICAL();
+
+			traceBLOCKING_ON_STREAM_BUFFER_SEND( xStreamBuffer );
+			( void ) xTaskNotifyWait( ( uint32_t ) 0, ( uint32_t ) 0, NULL, xTicksToWait );
+			pxStreamBuffer->xTaskWaitingToSend = NULL;
+
+		} while( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE );
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	if( xSpace == ( size_t ) 0 )
+	{
+		xSpace = xStreamBufferSpacesAvailable( pxStreamBuffer );
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	xReturn = prvWriteMessageToBuffer( pxStreamBuffer, pvTxData, xDataLengthBytes, xSpace, xRequiredSpace );
+
+	if( xReturn > ( size_t ) 0 )
+	{
+		traceSTREAM_BUFFER_SEND( xStreamBuffer, xReturn );
+
+		/* Was a task waiting for the data? */
+		if( prvBytesInBuffer( pxStreamBuffer ) >= pxStreamBuffer->xTriggerLevelBytes )
+		{
+			sbSEND_COMPLETED( pxStreamBuffer );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+		traceSTREAM_BUFFER_SEND_FAILED( xStreamBuffer );
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
+								 const void *pvTxData,
+								 size_t xDataLengthBytes,
+								 BaseType_t * const pxHigherPriorityTaskWoken )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+size_t xReturn, xSpace;
+size_t xRequiredSpace = xDataLengthBytes;
+
+	configASSERT( pvTxData );
+	configASSERT( pxStreamBuffer );
+
+	/* This send function is used to write to both message buffers and stream
+	buffers.  If this is a message buffer then the space needed must be
+	increased by the amount of bytes needed to store the length of the
+	message. */
+	if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER ) != ( uint8_t ) 0 )
+	{
+		xRequiredSpace += sbBYTES_TO_STORE_MESSAGE_LENGTH;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	xSpace = xStreamBufferSpacesAvailable( pxStreamBuffer );
+	xReturn = prvWriteMessageToBuffer( pxStreamBuffer, pvTxData, xDataLengthBytes, xSpace, xRequiredSpace );
+
+	if( xReturn > ( size_t ) 0 )
+	{
+		/* Was a task waiting for the data? */
+		if( prvBytesInBuffer( pxStreamBuffer ) >= pxStreamBuffer->xTriggerLevelBytes )
+		{
+			sbSEND_COMPLETE_FROM_ISR( pxStreamBuffer, pxHigherPriorityTaskWoken );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	traceSTREAM_BUFFER_SEND_FROM_ISR( xStreamBuffer, xReturn );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+static size_t prvWriteMessageToBuffer( StreamBuffer_t * const pxStreamBuffer,
+									   const void * pvTxData,
+									   size_t xDataLengthBytes,
+									   size_t xSpace,
+									   size_t xRequiredSpace )
+{
+	BaseType_t xShouldWrite;
+	size_t xReturn;
+
+	if( xSpace == ( size_t ) 0 )
+	{
+		/* Doesn't matter if this is a stream buffer or a message buffer, there
+		is no space to write. */
+		xShouldWrite = pdFALSE;
+	}
+	else if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER ) == ( uint8_t ) 0 )
+	{
+		/* This is a stream buffer, as opposed to a message buffer, so writing a
+		stream of bytes rather than discrete messages.  Write as many bytes as
+		possible. */
+		xShouldWrite = pdTRUE;
+		xDataLengthBytes = configMIN( xDataLengthBytes, xSpace );
+	}
+	else if( xSpace >= xRequiredSpace )
+	{
+		/* This is a message buffer, as opposed to a stream buffer, and there
+		is enough space to write both the message length and the message itself
+		into the buffer.  Start by writing the length of the data, the data
+		itself will be written later in this function. */
+		xShouldWrite = pdTRUE;
+		( void ) prvWriteBytesToBuffer( pxStreamBuffer, ( const uint8_t * ) &( xDataLengthBytes ), sbBYTES_TO_STORE_MESSAGE_LENGTH );
+	}
+	else
+	{
+		/* There is space available, but not enough space. */
+		xShouldWrite = pdFALSE;
+	}
+
+	if( xShouldWrite != pdFALSE )
+	{
+		/* Writes the data itself. */
+		xReturn = prvWriteBytesToBuffer( pxStreamBuffer, ( const uint8_t * ) pvTxData, xDataLengthBytes ); /*lint !e9079 Storage buffer is implemented as uint8_t for ease of sizing, alighment and access. */
+	}
+	else
+	{
+		xReturn = 0;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
+							 void *pvRxData,
+							 size_t xBufferLengthBytes,
+							 TickType_t xTicksToWait )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+size_t xReceivedLength = 0, xBytesAvailable, xBytesToStoreMessageLength;
+
+	configASSERT( pvRxData );
+	configASSERT( pxStreamBuffer );
+
+	/* This receive function is used by both message buffers, which store
+	discrete messages, and stream buffers, which store a continuous stream of
+	bytes.  Discrete messages include an additional
+	sbBYTES_TO_STORE_MESSAGE_LENGTH bytes that hold the length of the
+	message. */
+	if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER ) != ( uint8_t ) 0 )
+	{
+		xBytesToStoreMessageLength = sbBYTES_TO_STORE_MESSAGE_LENGTH;
+	}
+	else
+	{
+		xBytesToStoreMessageLength = 0;
+	}
+
+	if( xTicksToWait != ( TickType_t ) 0 )
+	{
+		/* Checking if there is data and clearing the notification state must be
+		performed atomically. */
+		taskENTER_CRITICAL();
+		{
+			xBytesAvailable = prvBytesInBuffer( pxStreamBuffer );
+
+			/* If this function was invoked by a message buffer read then
+			xBytesToStoreMessageLength holds the number of bytes used to hold
+			the length of the next discrete message.  If this function was
+			invoked by a stream buffer read then xBytesToStoreMessageLength will
+			be 0. */
+			if( xBytesAvailable <= xBytesToStoreMessageLength )
+			{
+				/* Clear notification state as going to wait for data. */
+				( void ) xTaskNotifyStateClear( NULL );
+
+				/* Should only be one reader. */
+				configASSERT( pxStreamBuffer->xTaskWaitingToReceive == NULL );
+				pxStreamBuffer->xTaskWaitingToReceive = xTaskGetCurrentTaskHandle();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		if( xBytesAvailable <= xBytesToStoreMessageLength )
+		{
+			/* Wait for data to be available. */
+			traceBLOCKING_ON_STREAM_BUFFER_RECEIVE( xStreamBuffer );
+			( void ) xTaskNotifyWait( ( uint32_t ) 0, ( uint32_t ) 0, NULL, xTicksToWait );
+			pxStreamBuffer->xTaskWaitingToReceive = NULL;
+
+			/* Recheck the data available after blocking. */
+			xBytesAvailable = prvBytesInBuffer( pxStreamBuffer );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		xBytesAvailable = prvBytesInBuffer( pxStreamBuffer );
+	}
+
+	/* Whether receiving a discrete message (where xBytesToStoreMessageLength
+	holds the number of bytes used to store the message length) or a stream of
+	bytes (where xBytesToStoreMessageLength is zero), the number of bytes
+	available must be greater than xBytesToStoreMessageLength to be able to
+	read bytes from the buffer. */
+	if( xBytesAvailable > xBytesToStoreMessageLength )
+	{
+		xReceivedLength = prvReadMessageFromBuffer( pxStreamBuffer, pvRxData, xBufferLengthBytes, xBytesAvailable, xBytesToStoreMessageLength );
+
+		/* Was a task waiting for space in the buffer? */
+		if( xReceivedLength != ( size_t ) 0 )
+		{
+			traceSTREAM_BUFFER_RECEIVE( xStreamBuffer, xReceivedLength );
+			sbRECEIVE_COMPLETED( pxStreamBuffer );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		traceSTREAM_BUFFER_RECEIVE_FAILED( xStreamBuffer );
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	return xReceivedLength;
+}
+/*-----------------------------------------------------------*/
+
+size_t xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+size_t xReturn, xBytesAvailable, xOriginalTail;
+configMESSAGE_BUFFER_LENGTH_TYPE xTempReturn;
+
+	configASSERT( pxStreamBuffer );
+
+	/* Ensure the stream buffer is being used as a message buffer. */
+	if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER ) != ( uint8_t ) 0 )
+	{
+		xBytesAvailable = prvBytesInBuffer( pxStreamBuffer );
+		if( xBytesAvailable > sbBYTES_TO_STORE_MESSAGE_LENGTH )
+		{
+			/* The number of bytes available is greater than the number of bytes
+			required to hold the length of the next message, so another message
+			is available.  Return its length without removing the length bytes
+			from the buffer.  A copy of the tail is stored so the buffer can be
+			returned to its prior state as the message is not actually being
+			removed from the buffer. */
+			xOriginalTail = pxStreamBuffer->xTail;
+			( void ) prvReadBytesFromBuffer( pxStreamBuffer, ( uint8_t * ) &xTempReturn, sbBYTES_TO_STORE_MESSAGE_LENGTH, xBytesAvailable );
+			xReturn = ( size_t ) xTempReturn;
+			pxStreamBuffer->xTail = xOriginalTail;
+		}
+		else
+		{
+			/* The minimum amount of bytes in a message buffer is
+			( sbBYTES_TO_STORE_MESSAGE_LENGTH + 1 ), so if xBytesAvailable is
+			less than sbBYTES_TO_STORE_MESSAGE_LENGTH the only other valid
+			value is 0. */
+			configASSERT( xBytesAvailable == 0 );
+			xReturn = 0;
+		}
+	}
+	else
+	{
+		xReturn = 0;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
+									void *pvRxData,
+									size_t xBufferLengthBytes,
+									BaseType_t * const pxHigherPriorityTaskWoken )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+size_t xReceivedLength = 0, xBytesAvailable, xBytesToStoreMessageLength;
+
+	configASSERT( pvRxData );
+	configASSERT( pxStreamBuffer );
+
+	/* This receive function is used by both message buffers, which store
+	discrete messages, and stream buffers, which store a continuous stream of
+	bytes.  Discrete messages include an additional
+	sbBYTES_TO_STORE_MESSAGE_LENGTH bytes that hold the length of the
+	message. */
+	if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER ) != ( uint8_t ) 0 )
+	{
+		xBytesToStoreMessageLength = sbBYTES_TO_STORE_MESSAGE_LENGTH;
+	}
+	else
+	{
+		xBytesToStoreMessageLength = 0;
+	}
+
+	xBytesAvailable = prvBytesInBuffer( pxStreamBuffer );
+
+	/* Whether receiving a discrete message (where xBytesToStoreMessageLength
+	holds the number of bytes used to store the message length) or a stream of
+	bytes (where xBytesToStoreMessageLength is zero), the number of bytes
+	available must be greater than xBytesToStoreMessageLength to be able to
+	read bytes from the buffer. */
+	if( xBytesAvailable > xBytesToStoreMessageLength )
+	{
+		xReceivedLength = prvReadMessageFromBuffer( pxStreamBuffer, pvRxData, xBufferLengthBytes, xBytesAvailable, xBytesToStoreMessageLength );
+
+		/* Was a task waiting for space in the buffer? */
+		if( xReceivedLength != ( size_t ) 0 )
+		{
+			sbRECEIVE_COMPLETED_FROM_ISR( pxStreamBuffer, pxHigherPriorityTaskWoken );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	traceSTREAM_BUFFER_RECEIVE_FROM_ISR( xStreamBuffer, xReceivedLength );
+
+	return xReceivedLength;
+}
+/*-----------------------------------------------------------*/
+
+static size_t prvReadMessageFromBuffer( StreamBuffer_t *pxStreamBuffer,
+										void *pvRxData,
+										size_t xBufferLengthBytes,
+										size_t xBytesAvailable,
+										size_t xBytesToStoreMessageLength )
+{
+size_t xOriginalTail, xReceivedLength, xNextMessageLength;
+configMESSAGE_BUFFER_LENGTH_TYPE xTempNextMessageLength;
+
+	if( xBytesToStoreMessageLength != ( size_t ) 0 )
+	{
+		/* A discrete message is being received.  First receive the length
+		of the message.  A copy of the tail is stored so the buffer can be
+		returned to its prior state if the length of the message is too
+		large for the provided buffer. */
+		xOriginalTail = pxStreamBuffer->xTail;
+		( void ) prvReadBytesFromBuffer( pxStreamBuffer, ( uint8_t * ) &xTempNextMessageLength, xBytesToStoreMessageLength, xBytesAvailable );
+		xNextMessageLength = ( size_t ) xTempNextMessageLength;
+
+		/* Reduce the number of bytes available by the number of bytes just
+		read out. */
+		xBytesAvailable -= xBytesToStoreMessageLength;
+
+		/* Check there is enough space in the buffer provided by the
+		user. */
+		if( xNextMessageLength > xBufferLengthBytes )
+		{
+			/* The user has provided insufficient space to read the message
+			so return the buffer to its previous state (so the length of
+			the message is in the buffer again). */
+			pxStreamBuffer->xTail = xOriginalTail;
+			xNextMessageLength = 0;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		/* A stream of bytes is being received (as opposed to a discrete
+		message), so read as many bytes as possible. */
+		xNextMessageLength = xBufferLengthBytes;
+	}
+
+	/* Read the actual data. */
+	xReceivedLength = prvReadBytesFromBuffer( pxStreamBuffer, ( uint8_t * ) pvRxData, xNextMessageLength, xBytesAvailable ); /*lint !e9079 Data storage area is implemented as uint8_t array for ease of sizing, indexing and alignment. */
+
+	return xReceivedLength;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer )
+{
+const StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+BaseType_t xReturn;
+size_t xTail;
+
+	configASSERT( pxStreamBuffer );
+
+	/* True if no bytes are available. */
+	xTail = pxStreamBuffer->xTail;
+	if( pxStreamBuffer->xHead == xTail )
+	{
+		xReturn = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer )
+{
+BaseType_t xReturn;
+size_t xBytesToStoreMessageLength;
+const StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+
+	configASSERT( pxStreamBuffer );
+
+	/* This generic version of the receive function is used by both message
+	buffers, which store discrete messages, and stream buffers, which store a
+	continuous stream of bytes.  Discrete messages include an additional
+	sbBYTES_TO_STORE_MESSAGE_LENGTH bytes that hold the length of the message. */
+	if( ( pxStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER ) != ( uint8_t ) 0 )
+	{
+		xBytesToStoreMessageLength = sbBYTES_TO_STORE_MESSAGE_LENGTH;
+	}
+	else
+	{
+		xBytesToStoreMessageLength = 0;
+	}
+
+	/* True if the available space equals zero. */
+	if( xStreamBufferSpacesAvailable( xStreamBuffer ) <= xBytesToStoreMessageLength )
+	{
+		xReturn = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+
+	configASSERT( pxStreamBuffer );
+
+	uxSavedInterruptStatus = ( UBaseType_t ) portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		if( ( pxStreamBuffer )->xTaskWaitingToReceive != NULL )
+		{
+			( void ) xTaskNotifyFromISR( ( pxStreamBuffer )->xTaskWaitingToReceive,
+										 ( uint32_t ) 0,
+										 eNoAction,
+										 pxHigherPriorityTaskWoken );
+			( pxStreamBuffer )->xTaskWaitingToReceive = NULL;
+			xReturn = pdTRUE;
+		}
+		else
+		{
+			xReturn = pdFALSE;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken )
+{
+StreamBuffer_t * const pxStreamBuffer = xStreamBuffer;
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+
+	configASSERT( pxStreamBuffer );
+
+	uxSavedInterruptStatus = ( UBaseType_t ) portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		if( ( pxStreamBuffer )->xTaskWaitingToSend != NULL )
+		{
+			( void ) xTaskNotifyFromISR( ( pxStreamBuffer )->xTaskWaitingToSend,
+										 ( uint32_t ) 0,
+										 eNoAction,
+										 pxHigherPriorityTaskWoken );
+			( pxStreamBuffer )->xTaskWaitingToSend = NULL;
+			xReturn = pdTRUE;
+		}
+		else
+		{
+			xReturn = pdFALSE;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+static size_t prvWriteBytesToBuffer( StreamBuffer_t * const pxStreamBuffer, const uint8_t *pucData, size_t xCount )
+{
+size_t xNextHead, xFirstLength;
+
+	configASSERT( xCount > ( size_t ) 0 );
+
+	xNextHead = pxStreamBuffer->xHead;
+
+	/* Calculate the number of bytes that can be added in the first write -
+	which may be less than the total number of bytes that need to be added if
+	the buffer will wrap back to the beginning. */
+	xFirstLength = configMIN( pxStreamBuffer->xLength - xNextHead, xCount );
+
+	/* Write as many bytes as can be written in the first write. */
+	configASSERT( ( xNextHead + xFirstLength ) <= pxStreamBuffer->xLength );
+	( void ) memcpy( ( void* ) ( &( pxStreamBuffer->pucBuffer[ xNextHead ] ) ), ( const void * ) pucData, xFirstLength ); /*lint !e9087 memcpy() requires void *. */
+
+	/* If the number of bytes written was less than the number that could be
+	written in the first write... */
+	if( xCount > xFirstLength )
+	{
+		/* ...then write the remaining bytes to the start of the buffer. */
+		configASSERT( ( xCount - xFirstLength ) <= pxStreamBuffer->xLength );
+		( void ) memcpy( ( void * ) pxStreamBuffer->pucBuffer, ( const void * ) &( pucData[ xFirstLength ] ), xCount - xFirstLength ); /*lint !e9087 memcpy() requires void *. */
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	xNextHead += xCount;
+	if( xNextHead >= pxStreamBuffer->xLength )
+	{
+		xNextHead -= pxStreamBuffer->xLength;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	pxStreamBuffer->xHead = xNextHead;
+
+	return xCount;
+}
+/*-----------------------------------------------------------*/
+
+static size_t prvReadBytesFromBuffer( StreamBuffer_t *pxStreamBuffer, uint8_t *pucData, size_t xMaxCount, size_t xBytesAvailable )
+{
+size_t xCount, xFirstLength, xNextTail;
+
+	/* Use the minimum of the wanted bytes and the available bytes. */
+	xCount = configMIN( xBytesAvailable, xMaxCount );
+
+	if( xCount > ( size_t ) 0 )
+	{
+		xNextTail = pxStreamBuffer->xTail;
+
+		/* Calculate the number of bytes that can be read - which may be
+		less than the number wanted if the data wraps around to the start of
+		the buffer. */
+		xFirstLength = configMIN( pxStreamBuffer->xLength - xNextTail, xCount );
+
+		/* Obtain the number of bytes it is possible to obtain in the first
+		read.  Asserts check bounds of read and write. */
+		configASSERT( xFirstLength <= xMaxCount );
+		configASSERT( ( xNextTail + xFirstLength ) <= pxStreamBuffer->xLength );
+		( void ) memcpy( ( void * ) pucData, ( const void * ) &( pxStreamBuffer->pucBuffer[ xNextTail ] ), xFirstLength ); /*lint !e9087 memcpy() requires void *. */
+
+		/* If the total number of wanted bytes is greater than the number
+		that could be read in the first read... */
+		if( xCount > xFirstLength )
+		{
+			/*...then read the remaining bytes from the start of the buffer. */
+			configASSERT( xCount <= xMaxCount );
+			( void ) memcpy( ( void * ) &( pucData[ xFirstLength ] ), ( void * ) ( pxStreamBuffer->pucBuffer ), xCount - xFirstLength ); /*lint !e9087 memcpy() requires void *. */
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		/* Move the tail pointer to effectively remove the data read from
+		the buffer. */
+		xNextTail += xCount;
+
+		if( xNextTail >= pxStreamBuffer->xLength )
+		{
+			xNextTail -= pxStreamBuffer->xLength;
+		}
+
+		pxStreamBuffer->xTail = xNextTail;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	return xCount;
+}
+/*-----------------------------------------------------------*/
+
+static size_t prvBytesInBuffer( const StreamBuffer_t * const pxStreamBuffer )
+{
+/* Returns the distance between xTail and xHead. */
+size_t xCount;
+
+	xCount = pxStreamBuffer->xLength + pxStreamBuffer->xHead;
+	xCount -= pxStreamBuffer->xTail;
+	if ( xCount >= pxStreamBuffer->xLength )
+	{
+		xCount -= pxStreamBuffer->xLength;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	return xCount;
+}
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewStreamBuffer( StreamBuffer_t * const pxStreamBuffer,
+										  uint8_t * const pucBuffer,
+										  size_t xBufferSizeBytes,
+										  size_t xTriggerLevelBytes,
+										  uint8_t ucFlags )
+{
+	/* Assert here is deliberately writing to the entire buffer to ensure it can
+	be written to without generating exceptions, and is setting the buffer to a
+	known value to assist in development/debugging. */
+	#if( configASSERT_DEFINED == 1 )
+	{
+		/* The value written just has to be identifiable when looking at the
+		memory.  Don't use 0xA5 as that is the stack fill value and could
+		result in confusion as to what is actually being observed. */
+		const BaseType_t xWriteValue = 0x55;
+		configASSERT( memset( pucBuffer, ( int ) xWriteValue, xBufferSizeBytes ) == pucBuffer );
+	} /*lint !e529 !e438 xWriteValue is only used if configASSERT() is defined. */
+	#endif
+
+	( void ) memset( ( void * ) pxStreamBuffer, 0x00, sizeof( StreamBuffer_t ) ); /*lint !e9087 memset() requires void *. */
+	pxStreamBuffer->pucBuffer = pucBuffer;
+	pxStreamBuffer->xLength = xBufferSizeBytes;
+	pxStreamBuffer->xTriggerLevelBytes = xTriggerLevelBytes;
+	pxStreamBuffer->ucFlags = ucFlags;
+}
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxStreamBufferGetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer )
+	{
+		return xStreamBuffer->uxStreamBufferNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	void vStreamBufferSetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer, UBaseType_t uxStreamBufferNumber )
+	{
+		xStreamBuffer->uxStreamBufferNumber = uxStreamBufferNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	uint8_t ucStreamBufferGetStreamBufferType( StreamBufferHandle_t xStreamBuffer )
+	{
+		return ( xStreamBuffer->ucFlags & sbFLAGS_IS_MESSAGE_BUFFER );
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/tasks.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/tasks.c
new file mode 100644
index 0000000..f93fca0
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/tasks.c
@@ -0,0 +1,5310 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/* Standard includes. */
+#include 
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* FreeRTOS includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "timers.h"
+#include "stack_macros.h"
+
+/* Lint e9021, e961 and e750 are suppressed as a MISRA exception justified
+because the MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined
+for the header files above, but not in this file, in order to generate the
+correct privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750 !e9021. */
+
+/* Set configUSE_STATS_FORMATTING_FUNCTIONS to 2 to include the stats formatting
+functions but without including stdio.h here. */
+#if ( configUSE_STATS_FORMATTING_FUNCTIONS == 1 )
+	/* At the bottom of this file are two optional functions that can be used
+	to generate human readable text from the raw data generated by the
+	uxTaskGetSystemState() function.  Note the formatting functions are provided
+	for convenience only, and are NOT considered part of the kernel. */
+	#include 
+#endif /* configUSE_STATS_FORMATTING_FUNCTIONS == 1 ) */
+
+#if( configUSE_PREEMPTION == 0 )
+	/* If the cooperative scheduler is being used then a yield should not be
+	performed just because a higher priority task has been woken. */
+	#define taskYIELD_IF_USING_PREEMPTION()
+#else
+	#define taskYIELD_IF_USING_PREEMPTION() portYIELD_WITHIN_API()
+#endif
+
+/* Values that can be assigned to the ucNotifyState member of the TCB. */
+#define taskNOT_WAITING_NOTIFICATION	( ( uint8_t ) 0 )
+#define taskWAITING_NOTIFICATION		( ( uint8_t ) 1 )
+#define taskNOTIFICATION_RECEIVED		( ( uint8_t ) 2 )
+
+/*
+ * The value used to fill the stack of a task when the task is created.  This
+ * is used purely for checking the high water mark for tasks.
+ */
+#define tskSTACK_FILL_BYTE	( 0xa5U )
+
+/* Bits used to recored how a task's stack and TCB were allocated. */
+#define tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB 		( ( uint8_t ) 0 )
+#define tskSTATICALLY_ALLOCATED_STACK_ONLY 			( ( uint8_t ) 1 )
+#define tskSTATICALLY_ALLOCATED_STACK_AND_TCB		( ( uint8_t ) 2 )
+
+/* If any of the following are set then task stacks are filled with a known
+value so the high water mark can be determined.  If none of the following are
+set then don't fill the stack so there is no unnecessary dependency on memset. */
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) )
+	#define tskSET_NEW_STACKS_TO_KNOWN_VALUE	1
+#else
+	#define tskSET_NEW_STACKS_TO_KNOWN_VALUE	0
+#endif
+
+/*
+ * Macros used by vListTask to indicate which state a task is in.
+ */
+#define tskRUNNING_CHAR		( 'X' )
+#define tskBLOCKED_CHAR		( 'B' )
+#define tskREADY_CHAR		( 'R' )
+#define tskDELETED_CHAR		( 'D' )
+#define tskSUSPENDED_CHAR	( 'S' )
+
+/*
+ * Some kernel aware debuggers require the data the debugger needs access to be
+ * global, rather than file scope.
+ */
+#ifdef portREMOVE_STATIC_QUALIFIER
+	#define static
+#endif
+
+/* The name allocated to the Idle task.  This can be overridden by defining
+configIDLE_TASK_NAME in FreeRTOSConfig.h. */
+#ifndef configIDLE_TASK_NAME
+	#define configIDLE_TASK_NAME "IDLE"
+#endif
+
+#if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 0 )
+
+	/* If configUSE_PORT_OPTIMISED_TASK_SELECTION is 0 then task selection is
+	performed in a generic way that is not optimised to any particular
+	microcontroller architecture. */
+
+	/* uxTopReadyPriority holds the priority of the highest priority ready
+	state task. */
+	#define taskRECORD_READY_PRIORITY( uxPriority )														\
+	{																									\
+		if( ( uxPriority ) > uxTopReadyPriority )														\
+		{																								\
+			uxTopReadyPriority = ( uxPriority );														\
+		}																								\
+	} /* taskRECORD_READY_PRIORITY */
+
+	/*-----------------------------------------------------------*/
+
+	#define taskSELECT_HIGHEST_PRIORITY_TASK()															\
+	{																									\
+	UBaseType_t uxTopPriority = uxTopReadyPriority;														\
+																										\
+		/* Find the highest priority queue that contains ready tasks. */								\
+		while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopPriority ] ) ) )							\
+		{																								\
+			configASSERT( uxTopPriority );																\
+			--uxTopPriority;																			\
+		}																								\
+																										\
+		/* listGET_OWNER_OF_NEXT_ENTRY indexes through the list, so the tasks of						\
+		the	same priority get an equal share of the processor time. */									\
+		listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopPriority ] ) );			\
+		uxTopReadyPriority = uxTopPriority;																\
+	} /* taskSELECT_HIGHEST_PRIORITY_TASK */
+
+	/*-----------------------------------------------------------*/
+
+	/* Define away taskRESET_READY_PRIORITY() and portRESET_READY_PRIORITY() as
+	they are only required when a port optimised method of task selection is
+	being used. */
+	#define taskRESET_READY_PRIORITY( uxPriority )
+	#define portRESET_READY_PRIORITY( uxPriority, uxTopReadyPriority )
+
+#else /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+	/* If configUSE_PORT_OPTIMISED_TASK_SELECTION is 1 then task selection is
+	performed in a way that is tailored to the particular microcontroller
+	architecture being used. */
+
+	/* A port optimised version is provided.  Call the port defined macros. */
+	#define taskRECORD_READY_PRIORITY( uxPriority )	portRECORD_READY_PRIORITY( uxPriority, uxTopReadyPriority )
+
+	/*-----------------------------------------------------------*/
+
+	#define taskSELECT_HIGHEST_PRIORITY_TASK()														\
+	{																								\
+	UBaseType_t uxTopPriority;																		\
+																									\
+		/* Find the highest priority list that contains ready tasks. */								\
+		portGET_HIGHEST_PRIORITY( uxTopPriority, uxTopReadyPriority );								\
+		configASSERT( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ uxTopPriority ] ) ) > 0 );		\
+		listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopPriority ] ) );		\
+	} /* taskSELECT_HIGHEST_PRIORITY_TASK() */
+
+	/*-----------------------------------------------------------*/
+
+	/* A port optimised version is provided, call it only if the TCB being reset
+	is being referenced from a ready list.  If it is referenced from a delayed
+	or suspended list then it won't be in a ready list. */
+	#define taskRESET_READY_PRIORITY( uxPriority )														\
+	{																									\
+		if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ ( uxPriority ) ] ) ) == ( UBaseType_t ) 0 )	\
+		{																								\
+			portRESET_READY_PRIORITY( ( uxPriority ), ( uxTopReadyPriority ) );							\
+		}																								\
+	}
+
+#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+/*-----------------------------------------------------------*/
+
+/* pxDelayedTaskList and pxOverflowDelayedTaskList are switched when the tick
+count overflows. */
+#define taskSWITCH_DELAYED_LISTS()																	\
+{																									\
+	List_t *pxTemp;																					\
+																									\
+	/* The delayed tasks list should be empty when the lists are switched. */						\
+	configASSERT( ( listLIST_IS_EMPTY( pxDelayedTaskList ) ) );										\
+																									\
+	pxTemp = pxDelayedTaskList;																		\
+	pxDelayedTaskList = pxOverflowDelayedTaskList;													\
+	pxOverflowDelayedTaskList = pxTemp;																\
+	xNumOfOverflows++;																				\
+	prvResetNextTaskUnblockTime();																	\
+}
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Place the task represented by pxTCB into the appropriate ready list for
+ * the task.  It is inserted at the end of the list.
+ */
+#define prvAddTaskToReadyList( pxTCB )																\
+	traceMOVED_TASK_TO_READY_STATE( pxTCB );														\
+	taskRECORD_READY_PRIORITY( ( pxTCB )->uxPriority );												\
+	vListInsertEnd( &( pxReadyTasksLists[ ( pxTCB )->uxPriority ] ), &( ( pxTCB )->xStateListItem ) ); \
+	tracePOST_MOVED_TASK_TO_READY_STATE( pxTCB )
+/*-----------------------------------------------------------*/
+
+/*
+ * Several functions take an TaskHandle_t parameter that can optionally be NULL,
+ * where NULL is used to indicate that the handle of the currently executing
+ * task should be used in place of the parameter.  This macro simply checks to
+ * see if the parameter is NULL and returns a pointer to the appropriate TCB.
+ */
+#define prvGetTCBFromHandle( pxHandle ) ( ( ( pxHandle ) == NULL ) ? pxCurrentTCB : ( pxHandle ) )
+
+/* The item value of the event list item is normally used to hold the priority
+of the task to which it belongs (coded to allow it to be held in reverse
+priority order).  However, it is occasionally borrowed for other purposes.  It
+is important its value is not updated due to a task priority change while it is
+being used for another purpose.  The following bit definition is used to inform
+the scheduler that the value should not be changed - in which case it is the
+responsibility of whichever module is using the value to ensure it gets set back
+to its original value when it is released. */
+#if( configUSE_16_BIT_TICKS == 1 )
+	#define taskEVENT_LIST_ITEM_VALUE_IN_USE	0x8000U
+#else
+	#define taskEVENT_LIST_ITEM_VALUE_IN_USE	0x80000000UL
+#endif
+
+/*
+ * Task control block.  A task control block (TCB) is allocated for each task,
+ * and stores task state information, including a pointer to the task's context
+ * (the task's run time environment, including register values)
+ */
+typedef struct tskTaskControlBlock 			/* The old naming convention is used to prevent breaking kernel aware debuggers. */
+{
+	volatile StackType_t	*pxTopOfStack;	/*< Points to the location of the last item placed on the tasks stack.  THIS MUST BE THE FIRST MEMBER OF THE TCB STRUCT. */
+
+	#if ( portUSING_MPU_WRAPPERS == 1 )
+		xMPU_SETTINGS	xMPUSettings;		/*< The MPU settings are defined as part of the port layer.  THIS MUST BE THE SECOND MEMBER OF THE TCB STRUCT. */
+	#endif
+
+	ListItem_t			xStateListItem;	/*< The list that the state list item of a task is reference from denotes the state of that task (Ready, Blocked, Suspended ). */
+	ListItem_t			xEventListItem;		/*< Used to reference a task from an event list. */
+	UBaseType_t			uxPriority;			/*< The priority of the task.  0 is the lowest priority. */
+	StackType_t			*pxStack;			/*< Points to the start of the stack. */
+	char				pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created.  Facilitates debugging only. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+	#if ( ( portSTACK_GROWTH > 0 ) || ( configRECORD_STACK_HIGH_ADDRESS == 1 ) )
+		StackType_t		*pxEndOfStack;		/*< Points to the highest valid address for the stack. */
+	#endif
+
+	#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+		UBaseType_t		uxCriticalNesting;	/*< Holds the critical section nesting depth for ports that do not maintain their own count in the port layer. */
+	#endif
+
+	#if ( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t		uxTCBNumber;		/*< Stores a number that increments each time a TCB is created.  It allows debuggers to determine when a task has been deleted and then recreated. */
+		UBaseType_t		uxTaskNumber;		/*< Stores a number specifically for use by third party trace code. */
+	#endif
+
+	#if ( configUSE_MUTEXES == 1 )
+		UBaseType_t		uxBasePriority;		/*< The priority last assigned to the task - used by the priority inheritance mechanism. */
+		UBaseType_t		uxMutexesHeld;
+	#endif
+
+	#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+		TaskHookFunction_t pxTaskTag;
+	#endif
+
+	#if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 )
+		void			*pvThreadLocalStoragePointers[ configNUM_THREAD_LOCAL_STORAGE_POINTERS ];
+	#endif
+
+	#if( configGENERATE_RUN_TIME_STATS == 1 )
+		uint32_t		ulRunTimeCounter;	/*< Stores the amount of time the task has spent in the Running state. */
+	#endif
+
+	#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		/* Allocate a Newlib reent structure that is specific to this task.
+		Note Newlib support has been included by popular demand, but is not
+		used by the FreeRTOS maintainers themselves.  FreeRTOS is not
+		responsible for resulting newlib operation.  User must be familiar with
+		newlib and must provide system-wide implementations of the necessary
+		stubs. Be warned that (at the time of writing) the current newlib design
+		implements a system-wide malloc() that must be provided with locks.
+
+		See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html
+		for additional information. */
+		struct	_reent xNewLib_reent;
+	#endif
+
+	#if( configUSE_TASK_NOTIFICATIONS == 1 )
+		volatile uint32_t ulNotifiedValue;
+		volatile uint8_t ucNotifyState;
+	#endif
+
+	/* See the comments in FreeRTOS.h with the definition of
+	tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE. */
+	#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 !e9029 Macro has been consolidated for readability reasons. */
+		uint8_t	ucStaticallyAllocated; 		/*< Set to pdTRUE if the task is a statically allocated to ensure no attempt is made to free the memory. */
+	#endif
+
+	#if( INCLUDE_xTaskAbortDelay == 1 )
+		uint8_t ucDelayAborted;
+	#endif
+
+	#if( configUSE_POSIX_ERRNO == 1 )
+		int iTaskErrno;
+	#endif
+
+} tskTCB;
+
+/* The old tskTCB name is maintained above then typedefed to the new TCB_t name
+below to enable the use of older kernel aware debuggers. */
+typedef tskTCB TCB_t;
+
+/*lint -save -e956 A manual analysis and inspection has been used to determine
+which static variables must be declared volatile. */
+PRIVILEGED_DATA TCB_t * volatile pxCurrentTCB = NULL;
+
+/* Lists for ready and blocked tasks. --------------------
+xDelayedTaskList1 and xDelayedTaskList2 could be move to function scople but
+doing so breaks some kernel aware debuggers and debuggers that rely on removing
+the static qualifier. */
+PRIVILEGED_DATA static List_t pxReadyTasksLists[ configMAX_PRIORITIES ];/*< Prioritised ready tasks. */
+PRIVILEGED_DATA static List_t xDelayedTaskList1;						/*< Delayed tasks. */
+PRIVILEGED_DATA static List_t xDelayedTaskList2;						/*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */
+PRIVILEGED_DATA static List_t * volatile pxDelayedTaskList;				/*< Points to the delayed task list currently being used. */
+PRIVILEGED_DATA static List_t * volatile pxOverflowDelayedTaskList;		/*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */
+PRIVILEGED_DATA static List_t xPendingReadyList;						/*< Tasks that have been readied while the scheduler was suspended.  They will be moved to the ready list when the scheduler is resumed. */
+
+#if( INCLUDE_vTaskDelete == 1 )
+
+	PRIVILEGED_DATA static List_t xTasksWaitingTermination;				/*< Tasks that have been deleted - but their memory not yet freed. */
+	PRIVILEGED_DATA static volatile UBaseType_t uxDeletedTasksWaitingCleanUp = ( UBaseType_t ) 0U;
+
+#endif
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	PRIVILEGED_DATA static List_t xSuspendedTaskList;					/*< Tasks that are currently suspended. */
+
+#endif
+
+/* Global POSIX errno. Its value is changed upon context switching to match
+the errno of the currently running task. */
+#if ( configUSE_POSIX_ERRNO == 1 )
+	int FreeRTOS_errno = 0;
+#endif
+
+/* Other file private variables. --------------------------------*/
+PRIVILEGED_DATA static volatile UBaseType_t uxCurrentNumberOfTasks 	= ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile TickType_t xTickCount 				= ( TickType_t ) configINITIAL_TICK_COUNT;
+PRIVILEGED_DATA static volatile UBaseType_t uxTopReadyPriority 		= tskIDLE_PRIORITY;
+PRIVILEGED_DATA static volatile BaseType_t xSchedulerRunning 		= pdFALSE;
+PRIVILEGED_DATA static volatile TickType_t xPendedTicks 			= ( TickType_t ) 0U;
+PRIVILEGED_DATA static volatile BaseType_t xYieldPending 			= pdFALSE;
+PRIVILEGED_DATA static volatile BaseType_t xNumOfOverflows 			= ( BaseType_t ) 0;
+PRIVILEGED_DATA static UBaseType_t uxTaskNumber 					= ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile TickType_t xNextTaskUnblockTime		= ( TickType_t ) 0U; /* Initialised to portMAX_DELAY before the scheduler starts. */
+PRIVILEGED_DATA static TaskHandle_t xIdleTaskHandle					= NULL;			/*< Holds the handle of the idle task.  The idle task is created automatically when the scheduler is started. */
+
+/* Context switches are held pending while the scheduler is suspended.  Also,
+interrupts must not manipulate the xStateListItem of a TCB, or any of the
+lists the xStateListItem can be referenced from, if the scheduler is suspended.
+If an interrupt needs to unblock a task while the scheduler is suspended then it
+moves the task's event list item into the xPendingReadyList, ready for the
+kernel to move the task from the pending ready list into the real ready list
+when the scheduler is unsuspended.  The pending ready list itself can only be
+accessed from a critical section. */
+PRIVILEGED_DATA static volatile UBaseType_t uxSchedulerSuspended	= ( UBaseType_t ) pdFALSE;
+
+#if ( configGENERATE_RUN_TIME_STATS == 1 )
+
+	/* Do not move these variables to function scope as doing so prevents the
+	code working with debuggers that need to remove the static qualifier. */
+	PRIVILEGED_DATA static uint32_t ulTaskSwitchedInTime = 0UL;	/*< Holds the value of a timer/counter the last time a task was switched in. */
+	PRIVILEGED_DATA static uint32_t ulTotalRunTime = 0UL;		/*< Holds the total amount of execution time as defined by the run time counter clock. */
+
+#endif
+
+/*lint -restore */
+
+/*-----------------------------------------------------------*/
+
+/* Callback function prototypes. --------------------------*/
+#if(  configCHECK_FOR_STACK_OVERFLOW > 0 )
+
+	extern void vApplicationStackOverflowHook( TaskHandle_t xTask, char *pcTaskName );
+
+#endif
+
+#if( configUSE_TICK_HOOK > 0 )
+
+	extern void vApplicationTickHook( void ); /*lint !e526 Symbol not defined as it is an application callback. */
+
+#endif
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	extern void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ); /*lint !e526 Symbol not defined as it is an application callback. */
+
+#endif
+
+/* File private functions. --------------------------------*/
+
+/**
+ * Utility task that simply returns pdTRUE if the task referenced by xTask is
+ * currently in the Suspended state, or pdFALSE if the task referenced by xTask
+ * is in any other state.
+ */
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+#endif /* INCLUDE_vTaskSuspend */
+
+/*
+ * Utility to ready all the lists used by the scheduler.  This is called
+ * automatically upon the creation of the first task.
+ */
+static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The idle task, which as all tasks is implemented as a never ending loop.
+ * The idle task is automatically created and added to the ready lists upon
+ * creation of the first user task.
+ *
+ * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific
+ * language extensions.  The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );
+
+/*
+ * Utility to free all memory allocated by the scheduler to hold a TCB,
+ * including the stack pointed to by the TCB.
+ *
+ * This does not free memory allocated by the task itself (i.e. memory
+ * allocated by calls to pvPortMalloc from within the tasks application code).
+ */
+#if ( INCLUDE_vTaskDelete == 1 )
+
+	static void prvDeleteTCB( TCB_t *pxTCB ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Used only by the idle task.  This checks to see if anything has been placed
+ * in the list of tasks waiting to be deleted.  If so the task is cleaned up
+ * and its TCB deleted.
+ */
+static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The currently executing task is entering the Blocked state.  Add the task to
+ * either the current or the overflow delayed task list.
+ */
+static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely ) PRIVILEGED_FUNCTION;
+
+/*
+ * Fills an TaskStatus_t structure with information on each task that is
+ * referenced from the pxList list (which may be a ready list, a delayed list,
+ * a suspended list, etc.).
+ *
+ * THIS FUNCTION IS INTENDED FOR DEBUGGING ONLY, AND SHOULD NOT BE CALLED FROM
+ * NORMAL APPLICATION CODE.
+ */
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	static UBaseType_t prvListTasksWithinSingleList( TaskStatus_t *pxTaskStatusArray, List_t *pxList, eTaskState eState ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Searches pxList for a task with name pcNameToQuery - returning a handle to
+ * the task if it is found, or NULL if the task is not found.
+ */
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+	static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * When a task is created, the stack of the task is filled with a known value.
+ * This function determines the 'high water mark' of the task stack by
+ * determining how much of the stack remains at the original preset value.
+ */
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) )
+
+	static configSTACK_DEPTH_TYPE prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Return the amount of time, in ticks, that will pass before the kernel will
+ * next move a task from the Blocked state to the Running state.
+ *
+ * This conditional compilation should use inequality to 0, not equality to 1.
+ * This is to ensure portSUPPRESS_TICKS_AND_SLEEP() can be called when user
+ * defined low power mode implementations require configUSE_TICKLESS_IDLE to be
+ * set to a value other than 1.
+ */
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+	static TickType_t prvGetExpectedIdleTime( void ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Set xNextTaskUnblockTime to the time at which the next Blocked state task
+ * will exit the Blocked state.
+ */
+static void prvResetNextTaskUnblockTime( void );
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+	/*
+	 * Helper function used to pad task names with spaces when printing out
+	 * human readable tables of task information.
+	 */
+	static char *prvWriteNameToBuffer( char *pcBuffer, const char *pcTaskName ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Called after a Task_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewTask( 	TaskFunction_t pxTaskCode,
+									const char * const pcName, 		/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+									const uint32_t ulStackDepth,
+									void * const pvParameters,
+									UBaseType_t uxPriority,
+									TaskHandle_t * const pxCreatedTask,
+									TCB_t *pxNewTCB,
+									const MemoryRegion_t * const xRegions ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called after a new task has been created and initialised to place the task
+ * under the control of the scheduler.
+ */
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB ) PRIVILEGED_FUNCTION;
+
+/*
+ * freertos_tasks_c_additions_init() should only be called if the user definable
+ * macro FREERTOS_TASKS_C_ADDITIONS_INIT() is defined, as that is the only macro
+ * called by the function.
+ */
+#ifdef FREERTOS_TASKS_C_ADDITIONS_INIT
+
+	static void freertos_tasks_c_additions_init( void ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	TaskHandle_t xTaskCreateStatic(	TaskFunction_t pxTaskCode,
+									const char * const pcName,		/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+									const uint32_t ulStackDepth,
+									void * const pvParameters,
+									UBaseType_t uxPriority,
+									StackType_t * const puxStackBuffer,
+									StaticTask_t * const pxTaskBuffer )
+	{
+	TCB_t *pxNewTCB;
+	TaskHandle_t xReturn;
+
+		configASSERT( puxStackBuffer != NULL );
+		configASSERT( pxTaskBuffer != NULL );
+
+		#if( configASSERT_DEFINED == 1 )
+		{
+			/* Sanity check that the size of the structure used to declare a
+			variable of type StaticTask_t equals the size of the real task
+			structure. */
+			volatile size_t xSize = sizeof( StaticTask_t );
+			configASSERT( xSize == sizeof( TCB_t ) );
+			( void ) xSize; /* Prevent lint warning when configASSERT() is not used. */
+		}
+		#endif /* configASSERT_DEFINED */
+
+
+		if( ( pxTaskBuffer != NULL ) && ( puxStackBuffer != NULL ) )
+		{
+			/* The memory used for the task's TCB and stack are passed into this
+			function - use them. */
+			pxNewTCB = ( TCB_t * ) pxTaskBuffer; /*lint !e740 !e9087 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+			pxNewTCB->pxStack = ( StackType_t * ) puxStackBuffer;
+
+			#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 !e9029 Macro has been consolidated for readability reasons. */
+			{
+				/* Tasks can be created statically or dynamically, so note this
+				task was created statically in case the task is later deleted. */
+				pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;
+			}
+			#endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */
+
+			prvInitialiseNewTask( pxTaskCode, pcName, ulStackDepth, pvParameters, uxPriority, &xReturn, pxNewTCB, NULL );
+			prvAddNewTaskToReadyList( pxNewTCB );
+		}
+		else
+		{
+			xReturn = NULL;
+		}
+
+		return xReturn;
+	}
+
+#endif /* SUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+
+	BaseType_t xTaskCreateRestrictedStatic( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask )
+	{
+	TCB_t *pxNewTCB;
+	BaseType_t xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+
+		configASSERT( pxTaskDefinition->puxStackBuffer != NULL );
+		configASSERT( pxTaskDefinition->pxTaskBuffer != NULL );
+
+		if( ( pxTaskDefinition->puxStackBuffer != NULL ) && ( pxTaskDefinition->pxTaskBuffer != NULL ) )
+		{
+			/* Allocate space for the TCB.  Where the memory comes from depends
+			on the implementation of the port malloc function and whether or
+			not static allocation is being used. */
+			pxNewTCB = ( TCB_t * ) pxTaskDefinition->pxTaskBuffer;
+
+			/* Store the stack location in the TCB. */
+			pxNewTCB->pxStack = pxTaskDefinition->puxStackBuffer;
+
+			#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+			{
+				/* Tasks can be created statically or dynamically, so note this
+				task was created statically in case the task is later deleted. */
+				pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;
+			}
+			#endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */
+
+			prvInitialiseNewTask(	pxTaskDefinition->pvTaskCode,
+									pxTaskDefinition->pcName,
+									( uint32_t ) pxTaskDefinition->usStackDepth,
+									pxTaskDefinition->pvParameters,
+									pxTaskDefinition->uxPriority,
+									pxCreatedTask, pxNewTCB,
+									pxTaskDefinition->xRegions );
+
+			prvAddNewTaskToReadyList( pxNewTCB );
+			xReturn = pdPASS;
+		}
+
+		return xReturn;
+	}
+
+#endif /* ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) */
+/*-----------------------------------------------------------*/
+
+#if( ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	BaseType_t xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask )
+	{
+	TCB_t *pxNewTCB;
+	BaseType_t xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+
+		configASSERT( pxTaskDefinition->puxStackBuffer );
+
+		if( pxTaskDefinition->puxStackBuffer != NULL )
+		{
+			/* Allocate space for the TCB.  Where the memory comes from depends
+			on the implementation of the port malloc function and whether or
+			not static allocation is being used. */
+			pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );
+
+			if( pxNewTCB != NULL )
+			{
+				/* Store the stack location in the TCB. */
+				pxNewTCB->pxStack = pxTaskDefinition->puxStackBuffer;
+
+				#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+				{
+					/* Tasks can be created statically or dynamically, so note
+					this task had a statically allocated stack in case it is
+					later deleted.  The TCB was allocated dynamically. */
+					pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_ONLY;
+				}
+				#endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */
+
+				prvInitialiseNewTask(	pxTaskDefinition->pvTaskCode,
+										pxTaskDefinition->pcName,
+										( uint32_t ) pxTaskDefinition->usStackDepth,
+										pxTaskDefinition->pvParameters,
+										pxTaskDefinition->uxPriority,
+										pxCreatedTask, pxNewTCB,
+										pxTaskDefinition->xRegions );
+
+				prvAddNewTaskToReadyList( pxNewTCB );
+				xReturn = pdPASS;
+			}
+		}
+
+		return xReturn;
+	}
+
+#endif /* portUSING_MPU_WRAPPERS */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+	BaseType_t xTaskCreate(	TaskFunction_t pxTaskCode,
+							const char * const pcName,		/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+							const configSTACK_DEPTH_TYPE usStackDepth,
+							void * const pvParameters,
+							UBaseType_t uxPriority,
+							TaskHandle_t * const pxCreatedTask )
+	{
+	TCB_t *pxNewTCB;
+	BaseType_t xReturn;
+
+		/* If the stack grows down then allocate the stack then the TCB so the stack
+		does not grow into the TCB.  Likewise if the stack grows up then allocate
+		the TCB then the stack. */
+		#if( portSTACK_GROWTH > 0 )
+		{
+			/* Allocate space for the TCB.  Where the memory comes from depends on
+			the implementation of the port malloc function and whether or not static
+			allocation is being used. */
+			pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );
+
+			if( pxNewTCB != NULL )
+			{
+				/* Allocate space for the stack used by the task being created.
+				The base of the stack memory stored in the TCB so the task can
+				be deleted later if required. */
+				pxNewTCB->pxStack = ( StackType_t * ) pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+				if( pxNewTCB->pxStack == NULL )
+				{
+					/* Could not allocate the stack.  Delete the allocated TCB. */
+					vPortFree( pxNewTCB );
+					pxNewTCB = NULL;
+				}
+			}
+		}
+		#else /* portSTACK_GROWTH */
+		{
+		StackType_t *pxStack;
+
+			/* Allocate space for the stack used by the task being created. */
+			pxStack = pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e9079 All values returned by pvPortMalloc() have at least the alignment required by the MCU's stack and this allocation is the stack. */
+
+			if( pxStack != NULL )
+			{
+				/* Allocate space for the TCB. */
+				pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) ); /*lint !e9087 !e9079 All values returned by pvPortMalloc() have at least the alignment required by the MCU's stack, and the first member of TCB_t is always a pointer to the task's stack. */
+
+				if( pxNewTCB != NULL )
+				{
+					/* Store the stack location in the TCB. */
+					pxNewTCB->pxStack = pxStack;
+				}
+				else
+				{
+					/* The stack cannot be used as the TCB was not created.  Free
+					it again. */
+					vPortFree( pxStack );
+				}
+			}
+			else
+			{
+				pxNewTCB = NULL;
+			}
+		}
+		#endif /* portSTACK_GROWTH */
+
+		if( pxNewTCB != NULL )
+		{
+			#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e9029 !e731 Macro has been consolidated for readability reasons. */
+			{
+				/* Tasks can be created statically or dynamically, so note this
+				task was created dynamically in case it is later deleted. */
+				pxNewTCB->ucStaticallyAllocated = tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB;
+			}
+			#endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */
+
+			prvInitialiseNewTask( pxTaskCode, pcName, ( uint32_t ) usStackDepth, pvParameters, uxPriority, pxCreatedTask, pxNewTCB, NULL );
+			prvAddNewTaskToReadyList( pxNewTCB );
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewTask( 	TaskFunction_t pxTaskCode,
+									const char * const pcName,		/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+									const uint32_t ulStackDepth,
+									void * const pvParameters,
+									UBaseType_t uxPriority,
+									TaskHandle_t * const pxCreatedTask,
+									TCB_t *pxNewTCB,
+									const MemoryRegion_t * const xRegions )
+{
+StackType_t *pxTopOfStack;
+UBaseType_t x;
+
+	#if( portUSING_MPU_WRAPPERS == 1 )
+		/* Should the task be created in privileged mode? */
+		BaseType_t xRunPrivileged;
+		if( ( uxPriority & portPRIVILEGE_BIT ) != 0U )
+		{
+			xRunPrivileged = pdTRUE;
+		}
+		else
+		{
+			xRunPrivileged = pdFALSE;
+		}
+		uxPriority &= ~portPRIVILEGE_BIT;
+	#endif /* portUSING_MPU_WRAPPERS == 1 */
+
+	/* Avoid dependency on memset() if it is not required. */
+	#if( tskSET_NEW_STACKS_TO_KNOWN_VALUE == 1 )
+	{
+		/* Fill the stack with a known value to assist debugging. */
+		( void ) memset( pxNewTCB->pxStack, ( int ) tskSTACK_FILL_BYTE, ( size_t ) ulStackDepth * sizeof( StackType_t ) );
+	}
+	#endif /* tskSET_NEW_STACKS_TO_KNOWN_VALUE */
+
+	/* Calculate the top of stack address.  This depends on whether the stack
+	grows from high memory to low (as per the 80x86) or vice versa.
+	portSTACK_GROWTH is used to make the result positive or negative as required
+	by the port. */
+	#if( portSTACK_GROWTH < 0 )
+	{
+		pxTopOfStack = &( pxNewTCB->pxStack[ ulStackDepth - ( uint32_t ) 1 ] );
+		pxTopOfStack = ( StackType_t * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) ); /*lint !e923 !e9033 !e9078 MISRA exception.  Avoiding casts between pointers and integers is not practical.  Size differences accounted for using portPOINTER_SIZE_TYPE type.  Checked by assert(). */
+
+		/* Check the alignment of the calculated top of stack is correct. */
+		configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );
+
+		#if( configRECORD_STACK_HIGH_ADDRESS == 1 )
+		{
+			/* Also record the stack's high address, which may assist
+			debugging. */
+			pxNewTCB->pxEndOfStack = pxTopOfStack;
+		}
+		#endif /* configRECORD_STACK_HIGH_ADDRESS */
+	}
+	#else /* portSTACK_GROWTH */
+	{
+		pxTopOfStack = pxNewTCB->pxStack;
+
+		/* Check the alignment of the stack buffer is correct. */
+		configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxNewTCB->pxStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );
+
+		/* The other extreme of the stack space is required if stack checking is
+		performed. */
+		pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( ulStackDepth - ( uint32_t ) 1 );
+	}
+	#endif /* portSTACK_GROWTH */
+
+	/* Store the task name in the TCB. */
+	if( pcName != NULL )
+	{
+		for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )
+		{
+			pxNewTCB->pcTaskName[ x ] = pcName[ x ];
+
+			/* Don't copy all configMAX_TASK_NAME_LEN if the string is shorter than
+			configMAX_TASK_NAME_LEN characters just in case the memory after the
+			string is not accessible (extremely unlikely). */
+			if( pcName[ x ] == ( char ) 0x00 )
+			{
+				break;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		/* Ensure the name string is terminated in the case that the string length
+		was greater or equal to configMAX_TASK_NAME_LEN. */
+		pxNewTCB->pcTaskName[ configMAX_TASK_NAME_LEN - 1 ] = '\0';
+	}
+	else
+	{
+		/* The task has not been given a name, so just ensure there is a NULL
+		terminator when it is read out. */
+		pxNewTCB->pcTaskName[ 0 ] = 0x00;
+	}
+
+	/* This is used as an array index so must ensure it's not too large.  First
+	remove the privilege bit if one is present. */
+	if( uxPriority >= ( UBaseType_t ) configMAX_PRIORITIES )
+	{
+		uxPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	pxNewTCB->uxPriority = uxPriority;
+	#if ( configUSE_MUTEXES == 1 )
+	{
+		pxNewTCB->uxBasePriority = uxPriority;
+		pxNewTCB->uxMutexesHeld = 0;
+	}
+	#endif /* configUSE_MUTEXES */
+
+	vListInitialiseItem( &( pxNewTCB->xStateListItem ) );
+	vListInitialiseItem( &( pxNewTCB->xEventListItem ) );
+
+	/* Set the pxNewTCB as a link back from the ListItem_t.  This is so we can get
+	back to	the containing TCB from a generic item in a list. */
+	listSET_LIST_ITEM_OWNER( &( pxNewTCB->xStateListItem ), pxNewTCB );
+
+	/* Event lists are always in priority order. */
+	listSET_LIST_ITEM_VALUE( &( pxNewTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+	listSET_LIST_ITEM_OWNER( &( pxNewTCB->xEventListItem ), pxNewTCB );
+
+	#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+	{
+		pxNewTCB->uxCriticalNesting = ( UBaseType_t ) 0U;
+	}
+	#endif /* portCRITICAL_NESTING_IN_TCB */
+
+	#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+	{
+		pxNewTCB->pxTaskTag = NULL;
+	}
+	#endif /* configUSE_APPLICATION_TASK_TAG */
+
+	#if ( configGENERATE_RUN_TIME_STATS == 1 )
+	{
+		pxNewTCB->ulRunTimeCounter = 0UL;
+	}
+	#endif /* configGENERATE_RUN_TIME_STATS */
+
+	#if ( portUSING_MPU_WRAPPERS == 1 )
+	{
+		vPortStoreTaskMPUSettings( &( pxNewTCB->xMPUSettings ), xRegions, pxNewTCB->pxStack, ulStackDepth );
+	}
+	#else
+	{
+		/* Avoid compiler warning about unreferenced parameter. */
+		( void ) xRegions;
+	}
+	#endif
+
+	#if( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+	{
+		for( x = 0; x < ( UBaseType_t ) configNUM_THREAD_LOCAL_STORAGE_POINTERS; x++ )
+		{
+			pxNewTCB->pvThreadLocalStoragePointers[ x ] = NULL;
+		}
+	}
+	#endif
+
+	#if ( configUSE_TASK_NOTIFICATIONS == 1 )
+	{
+		pxNewTCB->ulNotifiedValue = 0;
+		pxNewTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+	}
+	#endif
+
+	#if ( configUSE_NEWLIB_REENTRANT == 1 )
+	{
+		/* Initialise this task's Newlib reent structure.
+		See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html
+		for additional information. */
+		_REENT_INIT_PTR( ( &( pxNewTCB->xNewLib_reent ) ) );
+	}
+	#endif
+
+	#if( INCLUDE_xTaskAbortDelay == 1 )
+	{
+		pxNewTCB->ucDelayAborted = pdFALSE;
+	}
+	#endif
+
+	/* Initialize the TCB stack to look as if the task was already running,
+	but had been interrupted by the scheduler.  The return address is set
+	to the start of the task function. Once the stack has been initialised
+	the top of stack variable is updated. */
+	#if( portUSING_MPU_WRAPPERS == 1 )
+	{
+		/* If the port has capability to detect stack overflow,
+		pass the stack end address to the stack initialization
+		function as well. */
+		#if( portHAS_STACK_OVERFLOW_CHECKING == 1 )
+		{
+			#if( portSTACK_GROWTH < 0 )
+			{
+				pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxStack, pxTaskCode, pvParameters, xRunPrivileged );
+			}
+			#else /* portSTACK_GROWTH */
+			{
+				pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxEndOfStack, pxTaskCode, pvParameters, xRunPrivileged );
+			}
+			#endif /* portSTACK_GROWTH */
+		}
+		#else /* portHAS_STACK_OVERFLOW_CHECKING */
+		{
+			pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );
+		}
+		#endif /* portHAS_STACK_OVERFLOW_CHECKING */
+	}
+	#else /* portUSING_MPU_WRAPPERS */
+	{
+		/* If the port has capability to detect stack overflow,
+		pass the stack end address to the stack initialization
+		function as well. */
+		#if( portHAS_STACK_OVERFLOW_CHECKING == 1 )
+		{
+			#if( portSTACK_GROWTH < 0 )
+			{
+				pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxStack, pxTaskCode, pvParameters );
+			}
+			#else /* portSTACK_GROWTH */
+			{
+				pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxEndOfStack, pxTaskCode, pvParameters );
+			}
+			#endif /* portSTACK_GROWTH */
+		}
+		#else /* portHAS_STACK_OVERFLOW_CHECKING */
+		{
+			pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );
+		}
+		#endif /* portHAS_STACK_OVERFLOW_CHECKING */
+	}
+	#endif /* portUSING_MPU_WRAPPERS */
+
+	if( pxCreatedTask != NULL )
+	{
+		/* Pass the handle out in an anonymous way.  The handle can be used to
+		change the created task's priority, delete the created task, etc.*/
+		*pxCreatedTask = ( TaskHandle_t ) pxNewTCB;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB )
+{
+	/* Ensure interrupts don't access the task lists while the lists are being
+	updated. */
+	taskENTER_CRITICAL();
+	{
+		uxCurrentNumberOfTasks++;
+		if( pxCurrentTCB == NULL )
+		{
+			/* There are no other tasks, or all the other tasks are in
+			the suspended state - make this the current task. */
+			pxCurrentTCB = pxNewTCB;
+
+			if( uxCurrentNumberOfTasks == ( UBaseType_t ) 1 )
+			{
+				/* This is the first task to be created so do the preliminary
+				initialisation required.  We will not recover if this call
+				fails, but we will report the failure. */
+				prvInitialiseTaskLists();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			/* If the scheduler is not already running, make this task the
+			current task if it is the highest priority task to be created
+			so far. */
+			if( xSchedulerRunning == pdFALSE )
+			{
+				if( pxCurrentTCB->uxPriority <= pxNewTCB->uxPriority )
+				{
+					pxCurrentTCB = pxNewTCB;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		uxTaskNumber++;
+
+		#if ( configUSE_TRACE_FACILITY == 1 )
+		{
+			/* Add a counter into the TCB for tracing only. */
+			pxNewTCB->uxTCBNumber = uxTaskNumber;
+		}
+		#endif /* configUSE_TRACE_FACILITY */
+		traceTASK_CREATE( pxNewTCB );
+
+		prvAddTaskToReadyList( pxNewTCB );
+
+		portSETUP_TCB( pxNewTCB );
+	}
+	taskEXIT_CRITICAL();
+
+	if( xSchedulerRunning != pdFALSE )
+	{
+		/* If the created task is of a higher priority than the current task
+		then it should run now. */
+		if( pxCurrentTCB->uxPriority < pxNewTCB->uxPriority )
+		{
+			taskYIELD_IF_USING_PREEMPTION();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+}
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+	void vTaskDelete( TaskHandle_t xTaskToDelete )
+	{
+	TCB_t *pxTCB;
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the calling task that is
+			being deleted. */
+			pxTCB = prvGetTCBFromHandle( xTaskToDelete );
+
+			/* Remove task from the ready/delayed list. */
+			if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+			{
+				taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Is the task waiting on an event also? */
+			if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+			{
+				( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Increment the uxTaskNumber also so kernel aware debuggers can
+			detect that the task lists need re-generating.  This is done before
+			portPRE_TASK_DELETE_HOOK() as in the Windows port that macro will
+			not return. */
+			uxTaskNumber++;
+
+			if( pxTCB == pxCurrentTCB )
+			{
+				/* A task is deleting itself.  This cannot complete within the
+				task itself, as a context switch to another task is required.
+				Place the task in the termination list.  The idle task will
+				check the termination list and free up any memory allocated by
+				the scheduler for the TCB and stack of the deleted task. */
+				vListInsertEnd( &xTasksWaitingTermination, &( pxTCB->xStateListItem ) );
+
+				/* Increment the ucTasksDeleted variable so the idle task knows
+				there is a task that has been deleted and that it should therefore
+				check the xTasksWaitingTermination list. */
+				++uxDeletedTasksWaitingCleanUp;
+
+				/* Call the delete hook before portPRE_TASK_DELETE_HOOK() as
+				portPRE_TASK_DELETE_HOOK() does not return in the Win32 port. */
+				traceTASK_DELETE( pxTCB );
+
+				/* The pre-delete hook is primarily for the Windows simulator,
+				in which Windows specific clean up operations are performed,
+				after which it is not possible to yield away from this task -
+				hence xYieldPending is used to latch that a context switch is
+				required. */
+				portPRE_TASK_DELETE_HOOK( pxTCB, &xYieldPending );
+			}
+			else
+			{
+				--uxCurrentNumberOfTasks;
+				traceTASK_DELETE( pxTCB );
+				prvDeleteTCB( pxTCB );
+
+				/* Reset the next expected unblock time in case it referred to
+				the task that has just been deleted. */
+				prvResetNextTaskUnblockTime();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		/* Force a reschedule if it is the currently running task that has just
+		been deleted. */
+		if( xSchedulerRunning != pdFALSE )
+		{
+			if( pxTCB == pxCurrentTCB )
+			{
+				configASSERT( uxSchedulerSuspended == 0 );
+				portYIELD_WITHIN_API();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	}
+
+#endif /* INCLUDE_vTaskDelete */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelayUntil == 1 )
+
+	void vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement )
+	{
+	TickType_t xTimeToWake;
+	BaseType_t xAlreadyYielded, xShouldDelay = pdFALSE;
+
+		configASSERT( pxPreviousWakeTime );
+		configASSERT( ( xTimeIncrement > 0U ) );
+		configASSERT( uxSchedulerSuspended == 0 );
+
+		vTaskSuspendAll();
+		{
+			/* Minor optimisation.  The tick count cannot change in this
+			block. */
+			const TickType_t xConstTickCount = xTickCount;
+
+			/* Generate the tick time at which the task wants to wake. */
+			xTimeToWake = *pxPreviousWakeTime + xTimeIncrement;
+
+			if( xConstTickCount < *pxPreviousWakeTime )
+			{
+				/* The tick count has overflowed since this function was
+				lasted called.  In this case the only time we should ever
+				actually delay is if the wake time has also	overflowed,
+				and the wake time is greater than the tick time.  When this
+				is the case it is as if neither time had overflowed. */
+				if( ( xTimeToWake < *pxPreviousWakeTime ) && ( xTimeToWake > xConstTickCount ) )
+				{
+					xShouldDelay = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* The tick time has not overflowed.  In this case we will
+				delay if either the wake time has overflowed, and/or the
+				tick time is less than the wake time. */
+				if( ( xTimeToWake < *pxPreviousWakeTime ) || ( xTimeToWake > xConstTickCount ) )
+				{
+					xShouldDelay = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+
+			/* Update the wake time ready for the next call. */
+			*pxPreviousWakeTime = xTimeToWake;
+
+			if( xShouldDelay != pdFALSE )
+			{
+				traceTASK_DELAY_UNTIL( xTimeToWake );
+
+				/* prvAddCurrentTaskToDelayedList() needs the block time, not
+				the time to wake, so subtract the current tick count. */
+				prvAddCurrentTaskToDelayedList( xTimeToWake - xConstTickCount, pdFALSE );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		xAlreadyYielded = xTaskResumeAll();
+
+		/* Force a reschedule if xTaskResumeAll has not already done so, we may
+		have put ourselves to sleep. */
+		if( xAlreadyYielded == pdFALSE )
+		{
+			portYIELD_WITHIN_API();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskDelayUntil */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelay == 1 )
+
+	void vTaskDelay( const TickType_t xTicksToDelay )
+	{
+	BaseType_t xAlreadyYielded = pdFALSE;
+
+		/* A delay time of zero just forces a reschedule. */
+		if( xTicksToDelay > ( TickType_t ) 0U )
+		{
+			configASSERT( uxSchedulerSuspended == 0 );
+			vTaskSuspendAll();
+			{
+				traceTASK_DELAY();
+
+				/* A task that is removed from the event list while the
+				scheduler is suspended will not get placed in the ready
+				list or removed from the blocked list until the scheduler
+				is resumed.
+
+				This task cannot be in an event list as it is the currently
+				executing task. */
+				prvAddCurrentTaskToDelayedList( xTicksToDelay, pdFALSE );
+			}
+			xAlreadyYielded = xTaskResumeAll();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		/* Force a reschedule if xTaskResumeAll has not already done so, we may
+		have put ourselves to sleep. */
+		if( xAlreadyYielded == pdFALSE )
+		{
+			portYIELD_WITHIN_API();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskDelay */
+/*-----------------------------------------------------------*/
+
+#if( ( INCLUDE_eTaskGetState == 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_xTaskAbortDelay == 1 ) )
+
+	eTaskState eTaskGetState( TaskHandle_t xTask )
+	{
+	eTaskState eReturn;
+	List_t const * pxStateList, *pxDelayedList, *pxOverflowedDelayedList;
+	const TCB_t * const pxTCB = xTask;
+
+		configASSERT( pxTCB );
+
+		if( pxTCB == pxCurrentTCB )
+		{
+			/* The task calling this function is querying its own state. */
+			eReturn = eRunning;
+		}
+		else
+		{
+			taskENTER_CRITICAL();
+			{
+				pxStateList = listLIST_ITEM_CONTAINER( &( pxTCB->xStateListItem ) );
+				pxDelayedList = pxDelayedTaskList;
+				pxOverflowedDelayedList = pxOverflowDelayedTaskList;
+			}
+			taskEXIT_CRITICAL();
+
+			if( ( pxStateList == pxDelayedList ) || ( pxStateList == pxOverflowedDelayedList ) )
+			{
+				/* The task being queried is referenced from one of the Blocked
+				lists. */
+				eReturn = eBlocked;
+			}
+
+			#if ( INCLUDE_vTaskSuspend == 1 )
+				else if( pxStateList == &xSuspendedTaskList )
+				{
+					/* The task being queried is referenced from the suspended
+					list.  Is it genuinely suspended or is it blocked
+					indefinitely? */
+					if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL )
+					{
+						#if( configUSE_TASK_NOTIFICATIONS == 1 )
+						{
+							/* The task does not appear on the event list item of
+							and of the RTOS objects, but could still be in the
+							blocked state if it is waiting on its notification
+							rather than waiting on an object. */
+							if( pxTCB->ucNotifyState == taskWAITING_NOTIFICATION )
+							{
+								eReturn = eBlocked;
+							}
+							else
+							{
+								eReturn = eSuspended;
+							}
+						}
+						#else
+						{
+							eReturn = eSuspended;
+						}
+						#endif
+					}
+					else
+					{
+						eReturn = eBlocked;
+					}
+				}
+			#endif
+
+			#if ( INCLUDE_vTaskDelete == 1 )
+				else if( ( pxStateList == &xTasksWaitingTermination ) || ( pxStateList == NULL ) )
+				{
+					/* The task being queried is referenced from the deleted
+					tasks list, or it is not referenced from any lists at
+					all. */
+					eReturn = eDeleted;
+				}
+			#endif
+
+			else /*lint !e525 Negative indentation is intended to make use of pre-processor clearer. */
+			{
+				/* If the task is not in any other state, it must be in the
+				Ready (including pending ready) state. */
+				eReturn = eReady;
+			}
+		}
+
+		return eReturn;
+	} /*lint !e818 xTask cannot be a pointer to const because it is a typedef. */
+
+#endif /* INCLUDE_eTaskGetState */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskPriorityGet == 1 )
+
+	UBaseType_t uxTaskPriorityGet( const TaskHandle_t xTask )
+	{
+	TCB_t const *pxTCB;
+	UBaseType_t uxReturn;
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the priority of the task
+			that called uxTaskPriorityGet() that is being queried. */
+			pxTCB = prvGetTCBFromHandle( xTask );
+			uxReturn = pxTCB->uxPriority;
+		}
+		taskEXIT_CRITICAL();
+
+		return uxReturn;
+	}
+
+#endif /* INCLUDE_uxTaskPriorityGet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskPriorityGet == 1 )
+
+	UBaseType_t uxTaskPriorityGetFromISR( const TaskHandle_t xTask )
+	{
+	TCB_t const *pxTCB;
+	UBaseType_t uxReturn, uxSavedInterruptState;
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		https://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		uxSavedInterruptState = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			/* If null is passed in here then it is the priority of the calling
+			task that is being queried. */
+			pxTCB = prvGetTCBFromHandle( xTask );
+			uxReturn = pxTCB->uxPriority;
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptState );
+
+		return uxReturn;
+	}
+
+#endif /* INCLUDE_uxTaskPriorityGet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskPrioritySet == 1 )
+
+	void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority )
+	{
+	TCB_t *pxTCB;
+	UBaseType_t uxCurrentBasePriority, uxPriorityUsedOnEntry;
+	BaseType_t xYieldRequired = pdFALSE;
+
+		configASSERT( ( uxNewPriority < configMAX_PRIORITIES ) );
+
+		/* Ensure the new priority is valid. */
+		if( uxNewPriority >= ( UBaseType_t ) configMAX_PRIORITIES )
+		{
+			uxNewPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the priority of the calling
+			task that is being changed. */
+			pxTCB = prvGetTCBFromHandle( xTask );
+
+			traceTASK_PRIORITY_SET( pxTCB, uxNewPriority );
+
+			#if ( configUSE_MUTEXES == 1 )
+			{
+				uxCurrentBasePriority = pxTCB->uxBasePriority;
+			}
+			#else
+			{
+				uxCurrentBasePriority = pxTCB->uxPriority;
+			}
+			#endif
+
+			if( uxCurrentBasePriority != uxNewPriority )
+			{
+				/* The priority change may have readied a task of higher
+				priority than the calling task. */
+				if( uxNewPriority > uxCurrentBasePriority )
+				{
+					if( pxTCB != pxCurrentTCB )
+					{
+						/* The priority of a task other than the currently
+						running task is being raised.  Is the priority being
+						raised above that of the running task? */
+						if( uxNewPriority >= pxCurrentTCB->uxPriority )
+						{
+							xYieldRequired = pdTRUE;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						/* The priority of the running task is being raised,
+						but the running task must already be the highest
+						priority task able to run so no yield is required. */
+					}
+				}
+				else if( pxTCB == pxCurrentTCB )
+				{
+					/* Setting the priority of the running task down means
+					there may now be another task of higher priority that
+					is ready to execute. */
+					xYieldRequired = pdTRUE;
+				}
+				else
+				{
+					/* Setting the priority of any other task down does not
+					require a yield as the running task must be above the
+					new priority of the task being modified. */
+				}
+
+				/* Remember the ready list the task might be referenced from
+				before its uxPriority member is changed so the
+				taskRESET_READY_PRIORITY() macro can function correctly. */
+				uxPriorityUsedOnEntry = pxTCB->uxPriority;
+
+				#if ( configUSE_MUTEXES == 1 )
+				{
+					/* Only change the priority being used if the task is not
+					currently using an inherited priority. */
+					if( pxTCB->uxBasePriority == pxTCB->uxPriority )
+					{
+						pxTCB->uxPriority = uxNewPriority;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* The base priority gets set whatever. */
+					pxTCB->uxBasePriority = uxNewPriority;
+				}
+				#else
+				{
+					pxTCB->uxPriority = uxNewPriority;
+				}
+				#endif
+
+				/* Only reset the event list item value if the value is not
+				being used for anything else. */
+				if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )
+				{
+					listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxNewPriority ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				/* If the task is in the blocked or suspended list we need do
+				nothing more than change its priority variable. However, if
+				the task is in a ready list it needs to be removed and placed
+				in the list appropriate to its new priority. */
+				if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxPriorityUsedOnEntry ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )
+				{
+					/* The task is currently in its ready list - remove before
+					adding it to it's new ready list.  As we are in a critical
+					section we can do this even if the scheduler is suspended. */
+					if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+					{
+						/* It is known that the task is in its ready list so
+						there is no need to check again and the port level
+						reset macro can be called directly. */
+						portRESET_READY_PRIORITY( uxPriorityUsedOnEntry, uxTopReadyPriority );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				if( xYieldRequired != pdFALSE )
+				{
+					taskYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				/* Remove compiler warning about unused variables when the port
+				optimised task selection is not being used. */
+				( void ) uxPriorityUsedOnEntry;
+			}
+		}
+		taskEXIT_CRITICAL();
+	}
+
+#endif /* INCLUDE_vTaskPrioritySet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	void vTaskSuspend( TaskHandle_t xTaskToSuspend )
+	{
+	TCB_t *pxTCB;
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the running task that is
+			being suspended. */
+			pxTCB = prvGetTCBFromHandle( xTaskToSuspend );
+
+			traceTASK_SUSPEND( pxTCB );
+
+			/* Remove task from the ready/delayed list and place in the
+			suspended list. */
+			if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+			{
+				taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Is the task waiting on an event also? */
+			if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+			{
+				( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			vListInsertEnd( &xSuspendedTaskList, &( pxTCB->xStateListItem ) );
+
+			#if( configUSE_TASK_NOTIFICATIONS == 1 )
+			{
+				if( pxTCB->ucNotifyState == taskWAITING_NOTIFICATION )
+				{
+					/* The task was blocked to wait for a notification, but is
+					now suspended, so no notification was received. */
+					pxTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+				}
+			}
+			#endif
+		}
+		taskEXIT_CRITICAL();
+
+		if( xSchedulerRunning != pdFALSE )
+		{
+			/* Reset the next expected unblock time in case it referred to the
+			task that is now in the Suspended state. */
+			taskENTER_CRITICAL();
+			{
+				prvResetNextTaskUnblockTime();
+			}
+			taskEXIT_CRITICAL();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		if( pxTCB == pxCurrentTCB )
+		{
+			if( xSchedulerRunning != pdFALSE )
+			{
+				/* The current task has just been suspended. */
+				configASSERT( uxSchedulerSuspended == 0 );
+				portYIELD_WITHIN_API();
+			}
+			else
+			{
+				/* The scheduler is not running, but the task that was pointed
+				to by pxCurrentTCB has just been suspended and pxCurrentTCB
+				must be adjusted to point to a different task. */
+				if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == uxCurrentNumberOfTasks ) /*lint !e931 Right has no side effect, just volatile. */
+				{
+					/* No other tasks are ready, so set pxCurrentTCB back to
+					NULL so when the next task is created pxCurrentTCB will
+					be set to point to it no matter what its relative priority
+					is. */
+					pxCurrentTCB = NULL;
+				}
+				else
+				{
+					vTaskSwitchContext();
+				}
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskSuspend */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask )
+	{
+	BaseType_t xReturn = pdFALSE;
+	const TCB_t * const pxTCB = xTask;
+
+		/* Accesses xPendingReadyList so must be called from a critical
+		section. */
+
+		/* It does not make sense to check if the calling task is suspended. */
+		configASSERT( xTask );
+
+		/* Is the task being resumed actually in the suspended list? */
+		if( listIS_CONTAINED_WITHIN( &xSuspendedTaskList, &( pxTCB->xStateListItem ) ) != pdFALSE )
+		{
+			/* Has the task already been resumed from within an ISR? */
+			if( listIS_CONTAINED_WITHIN( &xPendingReadyList, &( pxTCB->xEventListItem ) ) == pdFALSE )
+			{
+				/* Is it in the suspended list because it is in the	Suspended
+				state, or because is is blocked with no timeout? */
+				if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) != pdFALSE ) /*lint !e961.  The cast is only redundant when NULL is used. */
+				{
+					xReturn = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xReturn;
+	} /*lint !e818 xTask cannot be a pointer to const because it is a typedef. */
+
+#endif /* INCLUDE_vTaskSuspend */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	void vTaskResume( TaskHandle_t xTaskToResume )
+	{
+	TCB_t * const pxTCB = xTaskToResume;
+
+		/* It does not make sense to resume the calling task. */
+		configASSERT( xTaskToResume );
+
+		/* The parameter cannot be NULL as it is impossible to resume the
+		currently executing task. */
+		if( ( pxTCB != pxCurrentTCB ) && ( pxTCB != NULL ) )
+		{
+			taskENTER_CRITICAL();
+			{
+				if( prvTaskIsTaskSuspended( pxTCB ) != pdFALSE )
+				{
+					traceTASK_RESUME( pxTCB );
+
+					/* The ready list can be accessed even if the scheduler is
+					suspended because this is inside a critical section. */
+					( void ) uxListRemove(  &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+
+					/* A higher priority task may have just been resumed. */
+					if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+					{
+						/* This yield may not cause the task just resumed to run,
+						but will leave the lists in the correct state for the
+						next yield. */
+						taskYIELD_IF_USING_PREEMPTION();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			taskEXIT_CRITICAL();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskSuspend */
+
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) )
+
+	BaseType_t xTaskResumeFromISR( TaskHandle_t xTaskToResume )
+	{
+	BaseType_t xYieldRequired = pdFALSE;
+	TCB_t * const pxTCB = xTaskToResume;
+	UBaseType_t uxSavedInterruptStatus;
+
+		configASSERT( xTaskToResume );
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		https://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			if( prvTaskIsTaskSuspended( pxTCB ) != pdFALSE )
+			{
+				traceTASK_RESUME_FROM_ISR( pxTCB );
+
+				/* Check the ready lists can be accessed. */
+				if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+				{
+					/* Ready lists can be accessed so move the task from the
+					suspended list to the ready list directly. */
+					if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+					{
+						xYieldRequired = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					/* The delayed or ready lists cannot be accessed so the task
+					is held in the pending ready list until the scheduler is
+					unsuspended. */
+					vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+		return xYieldRequired;
+	}
+
+#endif /* ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+void vTaskStartScheduler( void )
+{
+BaseType_t xReturn;
+
+	/* Add the idle task at the lowest priority. */
+	#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	{
+		StaticTask_t *pxIdleTaskTCBBuffer = NULL;
+		StackType_t *pxIdleTaskStackBuffer = NULL;
+		uint32_t ulIdleTaskStackSize;
+
+		/* The Idle task is created using user provided RAM - obtain the
+		address of the RAM then create the idle task. */
+		vApplicationGetIdleTaskMemory( &pxIdleTaskTCBBuffer, &pxIdleTaskStackBuffer, &ulIdleTaskStackSize );
+		xIdleTaskHandle = xTaskCreateStatic(	prvIdleTask,
+												configIDLE_TASK_NAME,
+												ulIdleTaskStackSize,
+												( void * ) NULL, /*lint !e961.  The cast is not redundant for all compilers. */
+												portPRIVILEGE_BIT, /* In effect ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), but tskIDLE_PRIORITY is zero. */
+												pxIdleTaskStackBuffer,
+												pxIdleTaskTCBBuffer ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */
+
+		if( xIdleTaskHandle != NULL )
+		{
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+		}
+	}
+	#else
+	{
+		/* The Idle task is being created using dynamically allocated RAM. */
+		xReturn = xTaskCreate(	prvIdleTask,
+								configIDLE_TASK_NAME,
+								configMINIMAL_STACK_SIZE,
+								( void * ) NULL,
+								portPRIVILEGE_BIT, /* In effect ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), but tskIDLE_PRIORITY is zero. */
+								&xIdleTaskHandle ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */
+	}
+	#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+	#if ( configUSE_TIMERS == 1 )
+	{
+		if( xReturn == pdPASS )
+		{
+			xReturn = xTimerCreateTimerTask();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#endif /* configUSE_TIMERS */
+
+	if( xReturn == pdPASS )
+	{
+		/* freertos_tasks_c_additions_init() should only be called if the user
+		definable macro FREERTOS_TASKS_C_ADDITIONS_INIT() is defined, as that is
+		the only macro called by the function. */
+		#ifdef FREERTOS_TASKS_C_ADDITIONS_INIT
+		{
+			freertos_tasks_c_additions_init();
+		}
+		#endif
+
+		/* Interrupts are turned off here, to ensure a tick does not occur
+		before or during the call to xPortStartScheduler().  The stacks of
+		the created tasks contain a status word with interrupts switched on
+		so interrupts will automatically get re-enabled when the first task
+		starts to run. */
+		portDISABLE_INTERRUPTS();
+
+		#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		{
+			/* Switch Newlib's _impure_ptr variable to point to the _reent
+			structure specific to the task that will run first.
+			See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html
+			for additional information. */
+			_impure_ptr = &( pxCurrentTCB->xNewLib_reent );
+		}
+		#endif /* configUSE_NEWLIB_REENTRANT */
+
+		xNextTaskUnblockTime = portMAX_DELAY;
+		xSchedulerRunning = pdTRUE;
+		xTickCount = ( TickType_t ) configINITIAL_TICK_COUNT;
+
+		/* If configGENERATE_RUN_TIME_STATS is defined then the following
+		macro must be defined to configure the timer/counter used to generate
+		the run time counter time base.   NOTE:  If configGENERATE_RUN_TIME_STATS
+		is set to 0 and the following line fails to build then ensure you do not
+		have portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() defined in your
+		FreeRTOSConfig.h file. */
+		portCONFIGURE_TIMER_FOR_RUN_TIME_STATS();
+
+		traceTASK_SWITCHED_IN();
+
+		/* Setting up the timer tick is hardware specific and thus in the
+		portable interface. */
+		if( xPortStartScheduler() != pdFALSE )
+		{
+			/* Should not reach here as if the scheduler is running the
+			function will not return. */
+		}
+		else
+		{
+			/* Should only reach here if a task calls xTaskEndScheduler(). */
+		}
+	}
+	else
+	{
+		/* This line will only be reached if the kernel could not be started,
+		because there was not enough FreeRTOS heap to create the idle task
+		or the timer task. */
+		configASSERT( xReturn != errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY );
+	}
+
+	/* Prevent compiler warnings if INCLUDE_xTaskGetIdleTaskHandle is set to 0,
+	meaning xIdleTaskHandle is not used anywhere else. */
+	( void ) xIdleTaskHandle;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskEndScheduler( void )
+{
+	/* Stop the scheduler interrupts and call the portable scheduler end
+	routine so the original ISRs can be restored if necessary.  The port
+	layer must ensure interrupts enable	bit is left in the correct state. */
+	portDISABLE_INTERRUPTS();
+	xSchedulerRunning = pdFALSE;
+	vPortEndScheduler();
+}
+/*----------------------------------------------------------*/
+
+void vTaskSuspendAll( void )
+{
+	/* A critical section is not required as the variable is of type
+	BaseType_t.  Please read Richard Barry's reply in the following link to a
+	post in the FreeRTOS support forum before reporting this as a bug! -
+	http://goo.gl/wu4acr */
+
+	/* portSOFRWARE_BARRIER() is only implemented for emulated/simulated ports that
+	do not otherwise exhibit real time behaviour. */
+	portSOFTWARE_BARRIER();
+
+	/* The scheduler is suspended if uxSchedulerSuspended is non-zero.  An increment
+	is used to allow calls to vTaskSuspendAll() to nest. */
+	++uxSchedulerSuspended;
+
+	/* Enforces ordering for ports and optimised compilers that may otherwise place
+	the above increment elsewhere. */
+	portMEMORY_BARRIER();
+}
+/*----------------------------------------------------------*/
+
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+	static TickType_t prvGetExpectedIdleTime( void )
+	{
+	TickType_t xReturn;
+	UBaseType_t uxHigherPriorityReadyTasks = pdFALSE;
+
+		/* uxHigherPriorityReadyTasks takes care of the case where
+		configUSE_PREEMPTION is 0, so there may be tasks above the idle priority
+		task that are in the Ready state, even though the idle task is
+		running. */
+		#if( configUSE_PORT_OPTIMISED_TASK_SELECTION == 0 )
+		{
+			if( uxTopReadyPriority > tskIDLE_PRIORITY )
+			{
+				uxHigherPriorityReadyTasks = pdTRUE;
+			}
+		}
+		#else
+		{
+			const UBaseType_t uxLeastSignificantBit = ( UBaseType_t ) 0x01;
+
+			/* When port optimised task selection is used the uxTopReadyPriority
+			variable is used as a bit map.  If bits other than the least
+			significant bit are set then there are tasks that have a priority
+			above the idle priority that are in the Ready state.  This takes
+			care of the case where the co-operative scheduler is in use. */
+			if( uxTopReadyPriority > uxLeastSignificantBit )
+			{
+				uxHigherPriorityReadyTasks = pdTRUE;
+			}
+		}
+		#endif
+
+		if( pxCurrentTCB->uxPriority > tskIDLE_PRIORITY )
+		{
+			xReturn = 0;
+		}
+		else if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > 1 )
+		{
+			/* There are other idle priority tasks in the ready state.  If
+			time slicing is used then the very next tick interrupt must be
+			processed. */
+			xReturn = 0;
+		}
+		else if( uxHigherPriorityReadyTasks != pdFALSE )
+		{
+			/* There are tasks in the Ready state that have a priority above the
+			idle priority.  This path can only be reached if
+			configUSE_PREEMPTION is 0. */
+			xReturn = 0;
+		}
+		else
+		{
+			xReturn = xNextTaskUnblockTime - xTickCount;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*----------------------------------------------------------*/
+
+BaseType_t xTaskResumeAll( void )
+{
+TCB_t *pxTCB = NULL;
+BaseType_t xAlreadyYielded = pdFALSE;
+
+	/* If uxSchedulerSuspended is zero then this function does not match a
+	previous call to vTaskSuspendAll(). */
+	configASSERT( uxSchedulerSuspended );
+
+	/* It is possible that an ISR caused a task to be removed from an event
+	list while the scheduler was suspended.  If this was the case then the
+	removed task will have been added to the xPendingReadyList.  Once the
+	scheduler has been resumed it is safe to move all the pending ready
+	tasks from this list into their appropriate ready list. */
+	taskENTER_CRITICAL();
+	{
+		--uxSchedulerSuspended;
+
+		if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+		{
+			if( uxCurrentNumberOfTasks > ( UBaseType_t ) 0U )
+			{
+				/* Move any readied tasks from the pending list into the
+				appropriate ready list. */
+				while( listLIST_IS_EMPTY( &xPendingReadyList ) == pdFALSE )
+				{
+					pxTCB = listGET_OWNER_OF_HEAD_ENTRY( ( &xPendingReadyList ) ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+					( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+
+					/* If the moved task has a priority higher than the current
+					task then a yield must be performed. */
+					if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+					{
+						xYieldPending = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+
+				if( pxTCB != NULL )
+				{
+					/* A task was unblocked while the scheduler was suspended,
+					which may have prevented the next unblock time from being
+					re-calculated, in which case re-calculate it now.  Mainly
+					important for low power tickless implementations, where
+					this can prevent an unnecessary exit from low power
+					state. */
+					prvResetNextTaskUnblockTime();
+				}
+
+				/* If any ticks occurred while the scheduler was suspended then
+				they should be processed now.  This ensures the tick count does
+				not	slip, and that any delayed tasks are resumed at the correct
+				time. */
+				{
+					TickType_t xPendedCounts = xPendedTicks; /* Non-volatile copy. */
+
+					if( xPendedCounts > ( TickType_t ) 0U )
+					{
+						do
+						{
+							if( xTaskIncrementTick() != pdFALSE )
+							{
+								xYieldPending = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+							--xPendedCounts;
+						} while( xPendedCounts > ( TickType_t ) 0U );
+
+						xPendedTicks = 0;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+
+				if( xYieldPending != pdFALSE )
+				{
+					#if( configUSE_PREEMPTION != 0 )
+					{
+						xAlreadyYielded = pdTRUE;
+					}
+					#endif
+					taskYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xAlreadyYielded;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTaskGetTickCount( void )
+{
+TickType_t xTicks;
+
+	/* Critical section required if running on a 16 bit processor. */
+	portTICK_TYPE_ENTER_CRITICAL();
+	{
+		xTicks = xTickCount;
+	}
+	portTICK_TYPE_EXIT_CRITICAL();
+
+	return xTicks;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTaskGetTickCountFromISR( void )
+{
+TickType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: https://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR();
+	{
+		xReturn = xTickCount;
+	}
+	portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxTaskGetNumberOfTasks( void )
+{
+	/* A critical section is not required because the variables are of type
+	BaseType_t. */
+	return uxCurrentNumberOfTasks;
+}
+/*-----------------------------------------------------------*/
+
+char *pcTaskGetName( TaskHandle_t xTaskToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+TCB_t *pxTCB;
+
+	/* If null is passed in here then the name of the calling task is being
+	queried. */
+	pxTCB = prvGetTCBFromHandle( xTaskToQuery );
+	configASSERT( pxTCB );
+	return &( pxTCB->pcTaskName[ 0 ] );
+}
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+	static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] )
+	{
+	TCB_t *pxNextTCB, *pxFirstTCB, *pxReturn = NULL;
+	UBaseType_t x;
+	char cNextChar;
+	BaseType_t xBreakLoop;
+
+		/* This function is called with the scheduler suspended. */
+
+		if( listCURRENT_LIST_LENGTH( pxList ) > ( UBaseType_t ) 0 )
+		{
+			listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );  /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+
+			do
+			{
+				listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+
+				/* Check each character in the name looking for a match or
+				mismatch. */
+				xBreakLoop = pdFALSE;
+				for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )
+				{
+					cNextChar = pxNextTCB->pcTaskName[ x ];
+
+					if( cNextChar != pcNameToQuery[ x ] )
+					{
+						/* Characters didn't match. */
+						xBreakLoop = pdTRUE;
+					}
+					else if( cNextChar == ( char ) 0x00 )
+					{
+						/* Both strings terminated, a match must have been
+						found. */
+						pxReturn = pxNextTCB;
+						xBreakLoop = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					if( xBreakLoop != pdFALSE )
+					{
+						break;
+					}
+				}
+
+				if( pxReturn != NULL )
+				{
+					/* The handle has been found. */
+					break;
+				}
+
+			} while( pxNextTCB != pxFirstTCB );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return pxReturn;
+	}
+
+#endif /* INCLUDE_xTaskGetHandle */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+	TaskHandle_t xTaskGetHandle( const char *pcNameToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	UBaseType_t uxQueue = configMAX_PRIORITIES;
+	TCB_t* pxTCB;
+
+		/* Task names will be truncated to configMAX_TASK_NAME_LEN - 1 bytes. */
+		configASSERT( strlen( pcNameToQuery ) < configMAX_TASK_NAME_LEN );
+
+		vTaskSuspendAll();
+		{
+			/* Search the ready lists. */
+			do
+			{
+				uxQueue--;
+				pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) &( pxReadyTasksLists[ uxQueue ] ), pcNameToQuery );
+
+				if( pxTCB != NULL )
+				{
+					/* Found the handle. */
+					break;
+				}
+
+			} while( uxQueue > ( UBaseType_t ) tskIDLE_PRIORITY ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+			/* Search the delayed lists. */
+			if( pxTCB == NULL )
+			{
+				pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) pxDelayedTaskList, pcNameToQuery );
+			}
+
+			if( pxTCB == NULL )
+			{
+				pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) pxOverflowDelayedTaskList, pcNameToQuery );
+			}
+
+			#if ( INCLUDE_vTaskSuspend == 1 )
+			{
+				if( pxTCB == NULL )
+				{
+					/* Search the suspended list. */
+					pxTCB = prvSearchForNameWithinSingleList( &xSuspendedTaskList, pcNameToQuery );
+				}
+			}
+			#endif
+
+			#if( INCLUDE_vTaskDelete == 1 )
+			{
+				if( pxTCB == NULL )
+				{
+					/* Search the deleted list. */
+					pxTCB = prvSearchForNameWithinSingleList( &xTasksWaitingTermination, pcNameToQuery );
+				}
+			}
+			#endif
+		}
+		( void ) xTaskResumeAll();
+
+		return pxTCB;
+	}
+
+#endif /* INCLUDE_xTaskGetHandle */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime )
+	{
+	UBaseType_t uxTask = 0, uxQueue = configMAX_PRIORITIES;
+
+		vTaskSuspendAll();
+		{
+			/* Is there a space in the array for each task in the system? */
+			if( uxArraySize >= uxCurrentNumberOfTasks )
+			{
+				/* Fill in an TaskStatus_t structure with information on each
+				task in the Ready state. */
+				do
+				{
+					uxQueue--;
+					uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &( pxReadyTasksLists[ uxQueue ] ), eReady );
+
+				} while( uxQueue > ( UBaseType_t ) tskIDLE_PRIORITY ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+				/* Fill in an TaskStatus_t structure with information on each
+				task in the Blocked state. */
+				uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), ( List_t * ) pxDelayedTaskList, eBlocked );
+				uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), ( List_t * ) pxOverflowDelayedTaskList, eBlocked );
+
+				#if( INCLUDE_vTaskDelete == 1 )
+				{
+					/* Fill in an TaskStatus_t structure with information on
+					each task that has been deleted but not yet cleaned up. */
+					uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &xTasksWaitingTermination, eDeleted );
+				}
+				#endif
+
+				#if ( INCLUDE_vTaskSuspend == 1 )
+				{
+					/* Fill in an TaskStatus_t structure with information on
+					each task in the Suspended state. */
+					uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &xSuspendedTaskList, eSuspended );
+				}
+				#endif
+
+				#if ( configGENERATE_RUN_TIME_STATS == 1)
+				{
+					if( pulTotalRunTime != NULL )
+					{
+						#ifdef portALT_GET_RUN_TIME_COUNTER_VALUE
+							portALT_GET_RUN_TIME_COUNTER_VALUE( ( *pulTotalRunTime ) );
+						#else
+							*pulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();
+						#endif
+					}
+				}
+				#else
+				{
+					if( pulTotalRunTime != NULL )
+					{
+						*pulTotalRunTime = 0;
+					}
+				}
+				#endif
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		( void ) xTaskResumeAll();
+
+		return uxTask;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )
+
+	TaskHandle_t xTaskGetIdleTaskHandle( void )
+	{
+		/* If xTaskGetIdleTaskHandle() is called before the scheduler has been
+		started, then xIdleTaskHandle will be NULL. */
+		configASSERT( ( xIdleTaskHandle != NULL ) );
+		return xIdleTaskHandle;
+	}
+
+#endif /* INCLUDE_xTaskGetIdleTaskHandle */
+/*----------------------------------------------------------*/
+
+/* This conditional compilation should use inequality to 0, not equality to 1.
+This is to ensure vTaskStepTick() is available when user defined low power mode
+implementations require configUSE_TICKLESS_IDLE to be set to a value other than
+1. */
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+	void vTaskStepTick( const TickType_t xTicksToJump )
+	{
+		/* Correct the tick count value after a period during which the tick
+		was suppressed.  Note this does *not* call the tick hook function for
+		each stepped tick. */
+		configASSERT( ( xTickCount + xTicksToJump ) <= xNextTaskUnblockTime );
+		xTickCount += xTicksToJump;
+		traceINCREASE_TICK_COUNT( xTicksToJump );
+	}
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*----------------------------------------------------------*/
+
+BaseType_t xTaskCatchUpTicks( TickType_t xTicksToCatchUp )
+{
+BaseType_t xYieldRequired = pdFALSE;
+
+	/* Must not be called with the scheduler suspended as the implementation
+	relies on xPendedTicks being wound down to 0 in xTaskResumeAll(). */
+	configASSERT( uxSchedulerSuspended == 0 );
+
+	/* Use xPendedTicks to mimic xTicksToCatchUp number of ticks occurring when
+	the scheduler is suspended so the ticks are executed in xTaskResumeAll(). */
+	vTaskSuspendAll();
+	xPendedTicks += xTicksToCatchUp;
+	xYieldRequired = xTaskResumeAll();
+
+	return xYieldRequired;
+}
+/*----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskAbortDelay == 1 )
+
+	BaseType_t xTaskAbortDelay( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB = xTask;
+	BaseType_t xReturn;
+
+		configASSERT( pxTCB );
+
+		vTaskSuspendAll();
+		{
+			/* A task can only be prematurely removed from the Blocked state if
+			it is actually in the Blocked state. */
+			if( eTaskGetState( xTask ) == eBlocked )
+			{
+				xReturn = pdPASS;
+
+				/* Remove the reference to the task from the blocked list.  An
+				interrupt won't touch the xStateListItem because the
+				scheduler is suspended. */
+				( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+
+				/* Is the task waiting on an event also?  If so remove it from
+				the event list too.  Interrupts can touch the event list item,
+				even though the scheduler is suspended, so a critical section
+				is used. */
+				taskENTER_CRITICAL();
+				{
+					if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+					{
+						( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+
+						/* This lets the task know it was forcibly removed from the
+						blocked state so it should not re-evaluate its block time and
+						then block again. */
+						pxTCB->ucDelayAborted = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				taskEXIT_CRITICAL();
+
+				/* Place the unblocked task into the appropriate ready list. */
+				prvAddTaskToReadyList( pxTCB );
+
+				/* A task being unblocked cannot cause an immediate context
+				switch if preemption is turned off. */
+				#if (  configUSE_PREEMPTION == 1 )
+				{
+					/* Preemption is on, but a context switch should only be
+					performed if the unblocked task has a priority that is
+					equal to or higher than the currently executing task. */
+					if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+					{
+						/* Pend the yield to be performed when the scheduler
+						is unsuspended. */
+						xYieldPending = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_PREEMPTION */
+			}
+			else
+			{
+				xReturn = pdFAIL;
+			}
+		}
+		( void ) xTaskResumeAll();
+
+		return xReturn;
+	}
+
+#endif /* INCLUDE_xTaskAbortDelay */
+/*----------------------------------------------------------*/
+
+BaseType_t xTaskIncrementTick( void )
+{
+TCB_t * pxTCB;
+TickType_t xItemValue;
+BaseType_t xSwitchRequired = pdFALSE;
+
+	/* Called by the portable layer each time a tick interrupt occurs.
+	Increments the tick then checks to see if the new tick value will cause any
+	tasks to be unblocked. */
+	traceTASK_INCREMENT_TICK( xTickCount );
+	if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+	{
+		/* Minor optimisation.  The tick count cannot change in this
+		block. */
+		const TickType_t xConstTickCount = xTickCount + ( TickType_t ) 1;
+
+		/* Increment the RTOS tick, switching the delayed and overflowed
+		delayed lists if it wraps to 0. */
+		xTickCount = xConstTickCount;
+
+		if( xConstTickCount == ( TickType_t ) 0U ) /*lint !e774 'if' does not always evaluate to false as it is looking for an overflow. */
+		{
+			taskSWITCH_DELAYED_LISTS();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		/* See if this tick has made a timeout expire.  Tasks are stored in
+		the	queue in the order of their wake time - meaning once one task
+		has been found whose block time has not expired there is no need to
+		look any further down the list. */
+		if( xConstTickCount >= xNextTaskUnblockTime )
+		{
+			for( ;; )
+			{
+				if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )
+				{
+					/* The delayed list is empty.  Set xNextTaskUnblockTime
+					to the maximum possible value so it is extremely
+					unlikely that the
+					if( xTickCount >= xNextTaskUnblockTime ) test will pass
+					next time through. */
+					xNextTaskUnblockTime = portMAX_DELAY; /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+					break;
+				}
+				else
+				{
+					/* The delayed list is not empty, get the value of the
+					item at the head of the delayed list.  This is the time
+					at which the task at the head of the delayed list must
+					be removed from the Blocked state. */
+					pxTCB = listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+					xItemValue = listGET_LIST_ITEM_VALUE( &( pxTCB->xStateListItem ) );
+
+					if( xConstTickCount < xItemValue )
+					{
+						/* It is not time to unblock this item yet, but the
+						item value is the time at which the task at the head
+						of the blocked list must be removed from the Blocked
+						state -	so record the item value in
+						xNextTaskUnblockTime. */
+						xNextTaskUnblockTime = xItemValue;
+						break; /*lint !e9011 Code structure here is deedmed easier to understand with multiple breaks. */
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* It is time to remove the item from the Blocked state. */
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+
+					/* Is the task waiting on an event also?  If so remove
+					it from the event list. */
+					if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+					{
+						( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* Place the unblocked task into the appropriate ready
+					list. */
+					prvAddTaskToReadyList( pxTCB );
+
+					/* A task being unblocked cannot cause an immediate
+					context switch if preemption is turned off. */
+					#if (  configUSE_PREEMPTION == 1 )
+					{
+						/* Preemption is on, but a context switch should
+						only be performed if the unblocked task has a
+						priority that is equal to or higher than the
+						currently executing task. */
+						if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+						{
+							xSwitchRequired = pdTRUE;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					#endif /* configUSE_PREEMPTION */
+				}
+			}
+		}
+
+		/* Tasks of equal priority to the currently running task will share
+		processing time (time slice) if preemption is on, and the application
+		writer has not explicitly turned time slicing off. */
+		#if ( ( configUSE_PREEMPTION == 1 ) && ( configUSE_TIME_SLICING == 1 ) )
+		{
+			if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ pxCurrentTCB->uxPriority ] ) ) > ( UBaseType_t ) 1 )
+			{
+				xSwitchRequired = pdTRUE;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* ( ( configUSE_PREEMPTION == 1 ) && ( configUSE_TIME_SLICING == 1 ) ) */
+
+		#if ( configUSE_TICK_HOOK == 1 )
+		{
+			/* Guard against the tick hook being called when the pended tick
+			count is being unwound (when the scheduler is being unlocked). */
+			if( xPendedTicks == ( TickType_t ) 0 )
+			{
+				vApplicationTickHook();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configUSE_TICK_HOOK */
+
+		#if ( configUSE_PREEMPTION == 1 )
+		{
+			if( xYieldPending != pdFALSE )
+			{
+				xSwitchRequired = pdTRUE;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configUSE_PREEMPTION */
+	}
+	else
+	{
+		++xPendedTicks;
+
+		/* The tick hook gets called at regular intervals, even if the
+		scheduler is locked. */
+		#if ( configUSE_TICK_HOOK == 1 )
+		{
+			vApplicationTickHook();
+		}
+		#endif
+	}
+
+	return xSwitchRequired;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+	void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction )
+	{
+	TCB_t *xTCB;
+
+		/* If xTask is NULL then it is the task hook of the calling task that is
+		getting set. */
+		if( xTask == NULL )
+		{
+			xTCB = ( TCB_t * ) pxCurrentTCB;
+		}
+		else
+		{
+			xTCB = xTask;
+		}
+
+		/* Save the hook function in the TCB.  A critical section is required as
+		the value can be accessed from an interrupt. */
+		taskENTER_CRITICAL();
+		{
+			xTCB->pxTaskTag = pxHookFunction;
+		}
+		taskEXIT_CRITICAL();
+	}
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+	TaskHookFunction_t xTaskGetApplicationTaskTag( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	TaskHookFunction_t xReturn;
+
+		/* If xTask is NULL then set the calling task's hook. */
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		/* Save the hook function in the TCB.  A critical section is required as
+		the value can be accessed from an interrupt. */
+		taskENTER_CRITICAL();
+		{
+			xReturn = pxTCB->pxTaskTag;
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+	TaskHookFunction_t xTaskGetApplicationTaskTagFromISR( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	TaskHookFunction_t xReturn;
+	UBaseType_t uxSavedInterruptStatus;
+
+		/* If xTask is NULL then set the calling task's hook. */
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		/* Save the hook function in the TCB.  A critical section is required as
+		the value can be accessed from an interrupt. */
+		uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			xReturn = pxTCB->pxTaskTag;
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+		return xReturn;
+	}
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+	BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter )
+	{
+	TCB_t *xTCB;
+	BaseType_t xReturn;
+
+		/* If xTask is NULL then we are calling our own task hook. */
+		if( xTask == NULL )
+		{
+			xTCB = pxCurrentTCB;
+		}
+		else
+		{
+			xTCB = xTask;
+		}
+
+		if( xTCB->pxTaskTag != NULL )
+		{
+			xReturn = xTCB->pxTaskTag( pvParameter );
+		}
+		else
+		{
+			xReturn = pdFAIL;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+void vTaskSwitchContext( void )
+{
+	if( uxSchedulerSuspended != ( UBaseType_t ) pdFALSE )
+	{
+		/* The scheduler is currently suspended - do not allow a context
+		switch. */
+		xYieldPending = pdTRUE;
+	}
+	else
+	{
+		xYieldPending = pdFALSE;
+		traceTASK_SWITCHED_OUT();
+
+		#if ( configGENERATE_RUN_TIME_STATS == 1 )
+		{
+			#ifdef portALT_GET_RUN_TIME_COUNTER_VALUE
+				portALT_GET_RUN_TIME_COUNTER_VALUE( ulTotalRunTime );
+			#else
+				ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();
+			#endif
+
+			/* Add the amount of time the task has been running to the
+			accumulated time so far.  The time the task started running was
+			stored in ulTaskSwitchedInTime.  Note that there is no overflow
+			protection here so count values are only valid until the timer
+			overflows.  The guard against negative values is to protect
+			against suspect run time stat counter implementations - which
+			are provided by the application, not the kernel. */
+			if( ulTotalRunTime > ulTaskSwitchedInTime )
+			{
+				pxCurrentTCB->ulRunTimeCounter += ( ulTotalRunTime - ulTaskSwitchedInTime );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+			ulTaskSwitchedInTime = ulTotalRunTime;
+		}
+		#endif /* configGENERATE_RUN_TIME_STATS */
+
+		/* Check for stack overflow, if configured. */
+		taskCHECK_FOR_STACK_OVERFLOW();
+
+		/* Before the currently running task is switched out, save its errno. */
+		#if( configUSE_POSIX_ERRNO == 1 )
+		{
+			pxCurrentTCB->iTaskErrno = FreeRTOS_errno;
+		}
+		#endif
+
+		/* Select a new task to run using either the generic C or port
+		optimised asm code. */
+		taskSELECT_HIGHEST_PRIORITY_TASK(); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+		traceTASK_SWITCHED_IN();
+
+		/* After the new task is switched in, update the global errno. */
+		#if( configUSE_POSIX_ERRNO == 1 )
+		{
+			FreeRTOS_errno = pxCurrentTCB->iTaskErrno;
+		}
+		#endif
+
+		#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		{
+			/* Switch Newlib's _impure_ptr variable to point to the _reent
+			structure specific to this task.
+			See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html
+			for additional information. */
+			_impure_ptr = &( pxCurrentTCB->xNewLib_reent );
+		}
+		#endif /* configUSE_NEWLIB_REENTRANT */
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vTaskPlaceOnEventList( List_t * const pxEventList, const TickType_t xTicksToWait )
+{
+	configASSERT( pxEventList );
+
+	/* THIS FUNCTION MUST BE CALLED WITH EITHER INTERRUPTS DISABLED OR THE
+	SCHEDULER SUSPENDED AND THE QUEUE BEING ACCESSED LOCKED. */
+
+	/* Place the event list item of the TCB in the appropriate event list.
+	This is placed in the list in priority order so the highest priority task
+	is the first to be woken by the event.  The queue that contains the event
+	list is locked, preventing simultaneous access from interrupts. */
+	vListInsert( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+	prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+}
+/*-----------------------------------------------------------*/
+
+void vTaskPlaceOnUnorderedEventList( List_t * pxEventList, const TickType_t xItemValue, const TickType_t xTicksToWait )
+{
+	configASSERT( pxEventList );
+
+	/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED.  It is used by
+	the event groups implementation. */
+	configASSERT( uxSchedulerSuspended != 0 );
+
+	/* Store the item value in the event list item.  It is safe to access the
+	event list item here as interrupts won't access the event list item of a
+	task that is not in the Blocked state. */
+	listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ), xItemValue | taskEVENT_LIST_ITEM_VALUE_IN_USE );
+
+	/* Place the event list item of the TCB at the end of the appropriate event
+	list.  It is safe to access the event list here because it is part of an
+	event group implementation - and interrupts don't access event groups
+	directly (instead they access them indirectly by pending function calls to
+	the task level). */
+	vListInsertEnd( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+	prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TIMERS == 1 )
+
+	void vTaskPlaceOnEventListRestricted( List_t * const pxEventList, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely )
+	{
+		configASSERT( pxEventList );
+
+		/* This function should not be called by application code hence the
+		'Restricted' in its name.  It is not part of the public API.  It is
+		designed for use by kernel code, and has special calling requirements -
+		it should be called with the scheduler suspended. */
+
+
+		/* Place the event list item of the TCB in the appropriate event list.
+		In this case it is assume that this is the only task that is going to
+		be waiting on this event list, so the faster vListInsertEnd() function
+		can be used in place of vListInsert. */
+		vListInsertEnd( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+		/* If the task should block indefinitely then set the block time to a
+		value that will be recognised as an indefinite delay inside the
+		prvAddCurrentTaskToDelayedList() function. */
+		if( xWaitIndefinitely != pdFALSE )
+		{
+			xTicksToWait = portMAX_DELAY;
+		}
+
+		traceTASK_DELAY_UNTIL( ( xTickCount + xTicksToWait ) );
+		prvAddCurrentTaskToDelayedList( xTicksToWait, xWaitIndefinitely );
+	}
+
+#endif /* configUSE_TIMERS */
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskRemoveFromEventList( const List_t * const pxEventList )
+{
+TCB_t *pxUnblockedTCB;
+BaseType_t xReturn;
+
+	/* THIS FUNCTION MUST BE CALLED FROM A CRITICAL SECTION.  It can also be
+	called from a critical section within an ISR. */
+
+	/* The event list is sorted in priority order, so the first in the list can
+	be removed as it is known to be the highest priority.  Remove the TCB from
+	the delayed list, and add it to the ready list.
+
+	If an event is for a queue that is locked then this function will never
+	get called - the lock count on the queue will get modified instead.  This
+	means exclusive access to the event list is guaranteed here.
+
+	This function assumes that a check has already been made to ensure that
+	pxEventList is not empty. */
+	pxUnblockedTCB = listGET_OWNER_OF_HEAD_ENTRY( pxEventList ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+	configASSERT( pxUnblockedTCB );
+	( void ) uxListRemove( &( pxUnblockedTCB->xEventListItem ) );
+
+	if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+	{
+		( void ) uxListRemove( &( pxUnblockedTCB->xStateListItem ) );
+		prvAddTaskToReadyList( pxUnblockedTCB );
+
+		#if( configUSE_TICKLESS_IDLE != 0 )
+		{
+			/* If a task is blocked on a kernel object then xNextTaskUnblockTime
+			might be set to the blocked task's time out time.  If the task is
+			unblocked for a reason other than a timeout xNextTaskUnblockTime is
+			normally left unchanged, because it is automatically reset to a new
+			value when the tick count equals xNextTaskUnblockTime.  However if
+			tickless idling is used it might be more important to enter sleep mode
+			at the earliest possible time - so reset xNextTaskUnblockTime here to
+			ensure it is updated at the earliest possible time. */
+			prvResetNextTaskUnblockTime();
+		}
+		#endif
+	}
+	else
+	{
+		/* The delayed and ready lists cannot be accessed, so hold this task
+		pending until the scheduler is resumed. */
+		vListInsertEnd( &( xPendingReadyList ), &( pxUnblockedTCB->xEventListItem ) );
+	}
+
+	if( pxUnblockedTCB->uxPriority > pxCurrentTCB->uxPriority )
+	{
+		/* Return true if the task removed from the event list has a higher
+		priority than the calling task.  This allows the calling task to know if
+		it should force a context switch now. */
+		xReturn = pdTRUE;
+
+		/* Mark that a yield is pending in case the user is not using the
+		"xHigherPriorityTaskWoken" parameter to an ISR safe FreeRTOS function. */
+		xYieldPending = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue )
+{
+TCB_t *pxUnblockedTCB;
+
+	/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED.  It is used by
+	the event flags implementation. */
+	configASSERT( uxSchedulerSuspended != pdFALSE );
+
+	/* Store the new item value in the event list. */
+	listSET_LIST_ITEM_VALUE( pxEventListItem, xItemValue | taskEVENT_LIST_ITEM_VALUE_IN_USE );
+
+	/* Remove the event list form the event flag.  Interrupts do not access
+	event flags. */
+	pxUnblockedTCB = listGET_LIST_ITEM_OWNER( pxEventListItem ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+	configASSERT( pxUnblockedTCB );
+	( void ) uxListRemove( pxEventListItem );
+
+	#if( configUSE_TICKLESS_IDLE != 0 )
+	{
+		/* If a task is blocked on a kernel object then xNextTaskUnblockTime
+		might be set to the blocked task's time out time.  If the task is
+		unblocked for a reason other than a timeout xNextTaskUnblockTime is
+		normally left unchanged, because it is automatically reset to a new
+		value when the tick count equals xNextTaskUnblockTime.  However if
+		tickless idling is used it might be more important to enter sleep mode
+		at the earliest possible time - so reset xNextTaskUnblockTime here to
+		ensure it is updated at the earliest possible time. */
+		prvResetNextTaskUnblockTime();
+	}
+	#endif
+
+	/* Remove the task from the delayed list and add it to the ready list.  The
+	scheduler is suspended so interrupts will not be accessing the ready
+	lists. */
+	( void ) uxListRemove( &( pxUnblockedTCB->xStateListItem ) );
+	prvAddTaskToReadyList( pxUnblockedTCB );
+
+	if( pxUnblockedTCB->uxPriority > pxCurrentTCB->uxPriority )
+	{
+		/* The unblocked task has a priority above that of the calling task, so
+		a context switch is required.  This function is called with the
+		scheduler suspended so xYieldPending is set so the context switch
+		occurs immediately that the scheduler is resumed (unsuspended). */
+		xYieldPending = pdTRUE;
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vTaskSetTimeOutState( TimeOut_t * const pxTimeOut )
+{
+	configASSERT( pxTimeOut );
+	taskENTER_CRITICAL();
+	{
+		pxTimeOut->xOverflowCount = xNumOfOverflows;
+		pxTimeOut->xTimeOnEntering = xTickCount;
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+void vTaskInternalSetTimeOutState( TimeOut_t * const pxTimeOut )
+{
+	/* For internal use only as it does not use a critical section. */
+	pxTimeOut->xOverflowCount = xNumOfOverflows;
+	pxTimeOut->xTimeOnEntering = xTickCount;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait )
+{
+BaseType_t xReturn;
+
+	configASSERT( pxTimeOut );
+	configASSERT( pxTicksToWait );
+
+	taskENTER_CRITICAL();
+	{
+		/* Minor optimisation.  The tick count cannot change in this block. */
+		const TickType_t xConstTickCount = xTickCount;
+		const TickType_t xElapsedTime = xConstTickCount - pxTimeOut->xTimeOnEntering;
+
+		#if( INCLUDE_xTaskAbortDelay == 1 )
+			if( pxCurrentTCB->ucDelayAborted != ( uint8_t ) pdFALSE )
+			{
+				/* The delay was aborted, which is not the same as a time out,
+				but has the same result. */
+				pxCurrentTCB->ucDelayAborted = pdFALSE;
+				xReturn = pdTRUE;
+			}
+			else
+		#endif
+
+		#if ( INCLUDE_vTaskSuspend == 1 )
+			if( *pxTicksToWait == portMAX_DELAY )
+			{
+				/* If INCLUDE_vTaskSuspend is set to 1 and the block time
+				specified is the maximum block time then the task should block
+				indefinitely, and therefore never time out. */
+				xReturn = pdFALSE;
+			}
+			else
+		#endif
+
+		if( ( xNumOfOverflows != pxTimeOut->xOverflowCount ) && ( xConstTickCount >= pxTimeOut->xTimeOnEntering ) ) /*lint !e525 Indentation preferred as is to make code within pre-processor directives clearer. */
+		{
+			/* The tick count is greater than the time at which
+			vTaskSetTimeout() was called, but has also overflowed since
+			vTaskSetTimeOut() was called.  It must have wrapped all the way
+			around and gone past again. This passed since vTaskSetTimeout()
+			was called. */
+			xReturn = pdTRUE;
+		}
+		else if( xElapsedTime < *pxTicksToWait ) /*lint !e961 Explicit casting is only redundant with some compilers, whereas others require it to prevent integer conversion errors. */
+		{
+			/* Not a genuine timeout. Adjust parameters for time remaining. */
+			*pxTicksToWait -= xElapsedTime;
+			vTaskInternalSetTimeOutState( pxTimeOut );
+			xReturn = pdFALSE;
+		}
+		else
+		{
+			*pxTicksToWait = 0;
+			xReturn = pdTRUE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskMissedYield( void )
+{
+	xYieldPending = pdTRUE;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxTaskGetTaskNumber( TaskHandle_t xTask )
+	{
+	UBaseType_t uxReturn;
+	TCB_t const *pxTCB;
+
+		if( xTask != NULL )
+		{
+			pxTCB = xTask;
+			uxReturn = pxTCB->uxTaskNumber;
+		}
+		else
+		{
+			uxReturn = 0U;
+		}
+
+		return uxReturn;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	void vTaskSetTaskNumber( TaskHandle_t xTask, const UBaseType_t uxHandle )
+	{
+	TCB_t * pxTCB;
+
+		if( xTask != NULL )
+		{
+			pxTCB = xTask;
+			pxTCB->uxTaskNumber = uxHandle;
+		}
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+
+/*
+ * -----------------------------------------------------------
+ * The Idle task.
+ * ----------------------------------------------------------
+ *
+ * The portTASK_FUNCTION() macro is used to allow port/compiler specific
+ * language extensions.  The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+static portTASK_FUNCTION( prvIdleTask, pvParameters )
+{
+	/* Stop warnings. */
+	( void ) pvParameters;
+
+	/** THIS IS THE RTOS IDLE TASK - WHICH IS CREATED AUTOMATICALLY WHEN THE
+	SCHEDULER IS STARTED. **/
+
+	/* In case a task that has a secure context deletes itself, in which case
+	the idle task is responsible for deleting the task's secure context, if
+	any. */
+	portALLOCATE_SECURE_CONTEXT( configMINIMAL_SECURE_STACK_SIZE );
+
+	for( ;; )
+	{
+		/* See if any tasks have deleted themselves - if so then the idle task
+		is responsible for freeing the deleted task's TCB and stack. */
+		prvCheckTasksWaitingTermination();
+
+		#if ( configUSE_PREEMPTION == 0 )
+		{
+			/* If we are not using preemption we keep forcing a task switch to
+			see if any other task has become available.  If we are using
+			preemption we don't need to do this as any task becoming available
+			will automatically get the processor anyway. */
+			taskYIELD();
+		}
+		#endif /* configUSE_PREEMPTION */
+
+		#if ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) )
+		{
+			/* When using preemption tasks of equal priority will be
+			timesliced.  If a task that is sharing the idle priority is ready
+			to run then the idle task should yield before the end of the
+			timeslice.
+
+			A critical region is not required here as we are just reading from
+			the list, and an occasional incorrect value will not matter.  If
+			the ready list at the idle priority contains more than one task
+			then a task other than the idle task is ready to execute. */
+			if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > ( UBaseType_t ) 1 )
+			{
+				taskYIELD();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) ) */
+
+		#if ( configUSE_IDLE_HOOK == 1 )
+		{
+			extern void vApplicationIdleHook( void );
+
+			/* Call the user defined function from within the idle task.  This
+			allows the application designer to add background functionality
+			without the overhead of a separate task.
+			NOTE: vApplicationIdleHook() MUST NOT, UNDER ANY CIRCUMSTANCES,
+			CALL A FUNCTION THAT MIGHT BLOCK. */
+			vApplicationIdleHook();
+		}
+		#endif /* configUSE_IDLE_HOOK */
+
+		/* This conditional compilation should use inequality to 0, not equality
+		to 1.  This is to ensure portSUPPRESS_TICKS_AND_SLEEP() is called when
+		user defined low power mode	implementations require
+		configUSE_TICKLESS_IDLE to be set to a value other than 1. */
+		#if ( configUSE_TICKLESS_IDLE != 0 )
+		{
+		TickType_t xExpectedIdleTime;
+
+			/* It is not desirable to suspend then resume the scheduler on
+			each iteration of the idle task.  Therefore, a preliminary
+			test of the expected idle time is performed without the
+			scheduler suspended.  The result here is not necessarily
+			valid. */
+			xExpectedIdleTime = prvGetExpectedIdleTime();
+
+			if( xExpectedIdleTime >= configEXPECTED_IDLE_TIME_BEFORE_SLEEP )
+			{
+				vTaskSuspendAll();
+				{
+					/* Now the scheduler is suspended, the expected idle
+					time can be sampled again, and this time its value can
+					be used. */
+					configASSERT( xNextTaskUnblockTime >= xTickCount );
+					xExpectedIdleTime = prvGetExpectedIdleTime();
+
+					/* Define the following macro to set xExpectedIdleTime to 0
+					if the application does not want
+					portSUPPRESS_TICKS_AND_SLEEP() to be called. */
+					configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING( xExpectedIdleTime );
+
+					if( xExpectedIdleTime >= configEXPECTED_IDLE_TIME_BEFORE_SLEEP )
+					{
+						traceLOW_POWER_IDLE_BEGIN();
+						portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime );
+						traceLOW_POWER_IDLE_END();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				( void ) xTaskResumeAll();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configUSE_TICKLESS_IDLE */
+	}
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TICKLESS_IDLE != 0 )
+
+	eSleepModeStatus eTaskConfirmSleepModeStatus( void )
+	{
+	/* The idle task exists in addition to the application tasks. */
+	const UBaseType_t uxNonApplicationTasks = 1;
+	eSleepModeStatus eReturn = eStandardSleep;
+
+		/* This function must be called from a critical section. */
+
+		if( listCURRENT_LIST_LENGTH( &xPendingReadyList ) != 0 )
+		{
+			/* A task was made ready while the scheduler was suspended. */
+			eReturn = eAbortSleep;
+		}
+		else if( xYieldPending != pdFALSE )
+		{
+			/* A yield was pended while the scheduler was suspended. */
+			eReturn = eAbortSleep;
+		}
+		else
+		{
+			/* If all the tasks are in the suspended list (which might mean they
+			have an infinite block time rather than actually being suspended)
+			then it is safe to turn all clocks off and just wait for external
+			interrupts. */
+			if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == ( uxCurrentNumberOfTasks - uxNonApplicationTasks ) )
+			{
+				eReturn = eNoTasksWaitingTimeout;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		return eReturn;
+	}
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+#if ( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+
+	void vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue )
+	{
+	TCB_t *pxTCB;
+
+		if( xIndex < configNUM_THREAD_LOCAL_STORAGE_POINTERS )
+		{
+			pxTCB = prvGetTCBFromHandle( xTaskToSet );
+			configASSERT( pxTCB != NULL );
+			pxTCB->pvThreadLocalStoragePointers[ xIndex ] = pvValue;
+		}
+	}
+
+#endif /* configNUM_THREAD_LOCAL_STORAGE_POINTERS */
+/*-----------------------------------------------------------*/
+
+#if ( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+
+	void *pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex )
+	{
+	void *pvReturn = NULL;
+	TCB_t *pxTCB;
+
+		if( xIndex < configNUM_THREAD_LOCAL_STORAGE_POINTERS )
+		{
+			pxTCB = prvGetTCBFromHandle( xTaskToQuery );
+			pvReturn = pxTCB->pvThreadLocalStoragePointers[ xIndex ];
+		}
+		else
+		{
+			pvReturn = NULL;
+		}
+
+		return pvReturn;
+	}
+
+#endif /* configNUM_THREAD_LOCAL_STORAGE_POINTERS */
+/*-----------------------------------------------------------*/
+
+#if ( portUSING_MPU_WRAPPERS == 1 )
+
+	void vTaskAllocateMPURegions( TaskHandle_t xTaskToModify, const MemoryRegion_t * const xRegions )
+	{
+	TCB_t *pxTCB;
+
+		/* If null is passed in here then we are modifying the MPU settings of
+		the calling task. */
+		pxTCB = prvGetTCBFromHandle( xTaskToModify );
+
+		vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, NULL, 0 );
+	}
+
+#endif /* portUSING_MPU_WRAPPERS */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseTaskLists( void )
+{
+UBaseType_t uxPriority;
+
+	for( uxPriority = ( UBaseType_t ) 0U; uxPriority < ( UBaseType_t ) configMAX_PRIORITIES; uxPriority++ )
+	{
+		vListInitialise( &( pxReadyTasksLists[ uxPriority ] ) );
+	}
+
+	vListInitialise( &xDelayedTaskList1 );
+	vListInitialise( &xDelayedTaskList2 );
+	vListInitialise( &xPendingReadyList );
+
+	#if ( INCLUDE_vTaskDelete == 1 )
+	{
+		vListInitialise( &xTasksWaitingTermination );
+	}
+	#endif /* INCLUDE_vTaskDelete */
+
+	#if ( INCLUDE_vTaskSuspend == 1 )
+	{
+		vListInitialise( &xSuspendedTaskList );
+	}
+	#endif /* INCLUDE_vTaskSuspend */
+
+	/* Start with pxDelayedTaskList using list1 and the pxOverflowDelayedTaskList
+	using list2. */
+	pxDelayedTaskList = &xDelayedTaskList1;
+	pxOverflowDelayedTaskList = &xDelayedTaskList2;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckTasksWaitingTermination( void )
+{
+
+	/** THIS FUNCTION IS CALLED FROM THE RTOS IDLE TASK **/
+
+	#if ( INCLUDE_vTaskDelete == 1 )
+	{
+		TCB_t *pxTCB;
+
+		/* uxDeletedTasksWaitingCleanUp is used to prevent taskENTER_CRITICAL()
+		being called too often in the idle task. */
+		while( uxDeletedTasksWaitingCleanUp > ( UBaseType_t ) 0U )
+		{
+			taskENTER_CRITICAL();
+			{
+				pxTCB = listGET_OWNER_OF_HEAD_ENTRY( ( &xTasksWaitingTermination ) ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+				( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+				--uxCurrentNumberOfTasks;
+				--uxDeletedTasksWaitingCleanUp;
+			}
+			taskEXIT_CRITICAL();
+
+			prvDeleteTCB( pxTCB );
+		}
+	}
+	#endif /* INCLUDE_vTaskDelete */
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TRACE_FACILITY == 1 )
+
+	void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState )
+	{
+	TCB_t *pxTCB;
+
+		/* xTask is NULL then get the state of the calling task. */
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		pxTaskStatus->xHandle = ( TaskHandle_t ) pxTCB;
+		pxTaskStatus->pcTaskName = ( const char * ) &( pxTCB->pcTaskName [ 0 ] );
+		pxTaskStatus->uxCurrentPriority = pxTCB->uxPriority;
+		pxTaskStatus->pxStackBase = pxTCB->pxStack;
+		pxTaskStatus->xTaskNumber = pxTCB->uxTCBNumber;
+
+		#if ( configUSE_MUTEXES == 1 )
+		{
+			pxTaskStatus->uxBasePriority = pxTCB->uxBasePriority;
+		}
+		#else
+		{
+			pxTaskStatus->uxBasePriority = 0;
+		}
+		#endif
+
+		#if ( configGENERATE_RUN_TIME_STATS == 1 )
+		{
+			pxTaskStatus->ulRunTimeCounter = pxTCB->ulRunTimeCounter;
+		}
+		#else
+		{
+			pxTaskStatus->ulRunTimeCounter = 0;
+		}
+		#endif
+
+		/* Obtaining the task state is a little fiddly, so is only done if the
+		value of eState passed into this function is eInvalid - otherwise the
+		state is just set to whatever is passed in. */
+		if( eState != eInvalid )
+		{
+			if( pxTCB == pxCurrentTCB )
+			{
+				pxTaskStatus->eCurrentState = eRunning;
+			}
+			else
+			{
+				pxTaskStatus->eCurrentState = eState;
+
+				#if ( INCLUDE_vTaskSuspend == 1 )
+				{
+					/* If the task is in the suspended list then there is a
+					chance it is actually just blocked indefinitely - so really
+					it should be reported as being in the Blocked state. */
+					if( eState == eSuspended )
+					{
+						vTaskSuspendAll();
+						{
+							if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+							{
+								pxTaskStatus->eCurrentState = eBlocked;
+							}
+						}
+						( void ) xTaskResumeAll();
+					}
+				}
+				#endif /* INCLUDE_vTaskSuspend */
+			}
+		}
+		else
+		{
+			pxTaskStatus->eCurrentState = eTaskGetState( pxTCB );
+		}
+
+		/* Obtaining the stack space takes some time, so the xGetFreeStackSpace
+		parameter is provided to allow it to be skipped. */
+		if( xGetFreeStackSpace != pdFALSE )
+		{
+			#if ( portSTACK_GROWTH > 0 )
+			{
+				pxTaskStatus->usStackHighWaterMark = prvTaskCheckFreeStackSpace( ( uint8_t * ) pxTCB->pxEndOfStack );
+			}
+			#else
+			{
+				pxTaskStatus->usStackHighWaterMark = prvTaskCheckFreeStackSpace( ( uint8_t * ) pxTCB->pxStack );
+			}
+			#endif
+		}
+		else
+		{
+			pxTaskStatus->usStackHighWaterMark = 0;
+		}
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	static UBaseType_t prvListTasksWithinSingleList( TaskStatus_t *pxTaskStatusArray, List_t *pxList, eTaskState eState )
+	{
+	configLIST_VOLATILE TCB_t *pxNextTCB, *pxFirstTCB;
+	UBaseType_t uxTask = 0;
+
+		if( listCURRENT_LIST_LENGTH( pxList ) > ( UBaseType_t ) 0 )
+		{
+			listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+
+			/* Populate an TaskStatus_t structure within the
+			pxTaskStatusArray array for each task that is referenced from
+			pxList.  See the definition of TaskStatus_t in task.h for the
+			meaning of each TaskStatus_t structure member. */
+			do
+			{
+				listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+				vTaskGetInfo( ( TaskHandle_t ) pxNextTCB, &( pxTaskStatusArray[ uxTask ] ), pdTRUE, eState );
+				uxTask++;
+			} while( pxNextTCB != pxFirstTCB );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return uxTask;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) )
+
+	static configSTACK_DEPTH_TYPE prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte )
+	{
+	uint32_t ulCount = 0U;
+
+		while( *pucStackByte == ( uint8_t ) tskSTACK_FILL_BYTE )
+		{
+			pucStackByte -= portSTACK_GROWTH;
+			ulCount++;
+		}
+
+		ulCount /= ( uint32_t ) sizeof( StackType_t ); /*lint !e961 Casting is not redundant on smaller architectures. */
+
+		return ( configSTACK_DEPTH_TYPE ) ulCount;
+	}
+
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 )
+
+	/* uxTaskGetStackHighWaterMark() and uxTaskGetStackHighWaterMark2() are the
+	same except for their return type.  Using configSTACK_DEPTH_TYPE allows the
+	user to determine the return type.  It gets around the problem of the value
+	overflowing on 8-bit types without breaking backward compatibility for
+	applications that expect an 8-bit return type. */
+	configSTACK_DEPTH_TYPE uxTaskGetStackHighWaterMark2( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	uint8_t *pucEndOfStack;
+	configSTACK_DEPTH_TYPE uxReturn;
+
+		/* uxTaskGetStackHighWaterMark() and uxTaskGetStackHighWaterMark2() are
+		the same except for their return type.  Using configSTACK_DEPTH_TYPE
+		allows the user to determine the return type.  It gets around the
+		problem of the value overflowing on 8-bit types without breaking
+		backward compatibility for applications that expect an 8-bit return
+		type. */
+
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		#if portSTACK_GROWTH < 0
+		{
+			pucEndOfStack = ( uint8_t * ) pxTCB->pxStack;
+		}
+		#else
+		{
+			pucEndOfStack = ( uint8_t * ) pxTCB->pxEndOfStack;
+		}
+		#endif
+
+		uxReturn = prvTaskCheckFreeStackSpace( pucEndOfStack );
+
+		return uxReturn;
+	}
+
+#endif /* INCLUDE_uxTaskGetStackHighWaterMark2 */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskGetStackHighWaterMark == 1 )
+
+	UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	uint8_t *pucEndOfStack;
+	UBaseType_t uxReturn;
+
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		#if portSTACK_GROWTH < 0
+		{
+			pucEndOfStack = ( uint8_t * ) pxTCB->pxStack;
+		}
+		#else
+		{
+			pucEndOfStack = ( uint8_t * ) pxTCB->pxEndOfStack;
+		}
+		#endif
+
+		uxReturn = ( UBaseType_t ) prvTaskCheckFreeStackSpace( pucEndOfStack );
+
+		return uxReturn;
+	}
+
+#endif /* INCLUDE_uxTaskGetStackHighWaterMark */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+	static void prvDeleteTCB( TCB_t *pxTCB )
+	{
+		/* This call is required specifically for the TriCore port.  It must be
+		above the vPortFree() calls.  The call is also used by ports/demos that
+		want to allocate and clean RAM statically. */
+		portCLEAN_UP_TCB( pxTCB );
+
+		/* Free up the memory allocated by the scheduler for the task.  It is up
+		to the task to free any memory allocated at the application level.
+		See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html
+		for additional information. */
+		#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		{
+			_reclaim_reent( &( pxTCB->xNewLib_reent ) );
+		}
+		#endif /* configUSE_NEWLIB_REENTRANT */
+
+		#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) && ( portUSING_MPU_WRAPPERS == 0 ) )
+		{
+			/* The task can only have been allocated dynamically - free both
+			the stack and TCB. */
+			vPortFree( pxTCB->pxStack );
+			vPortFree( pxTCB );
+		}
+		#elif( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 !e9029 Macro has been consolidated for readability reasons. */
+		{
+			/* The task could have been allocated statically or dynamically, so
+			check what was statically allocated before trying to free the
+			memory. */
+			if( pxTCB->ucStaticallyAllocated == tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB )
+			{
+				/* Both the stack and TCB were allocated dynamically, so both
+				must be freed. */
+				vPortFree( pxTCB->pxStack );
+				vPortFree( pxTCB );
+			}
+			else if( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_ONLY )
+			{
+				/* Only the stack was statically allocated, so the TCB is the
+				only memory that must be freed. */
+				vPortFree( pxTCB );
+			}
+			else
+			{
+				/* Neither the stack nor the TCB were allocated dynamically, so
+				nothing needs to be freed. */
+				configASSERT( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_AND_TCB	);
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+	}
+
+#endif /* INCLUDE_vTaskDelete */
+/*-----------------------------------------------------------*/
+
+static void prvResetNextTaskUnblockTime( void )
+{
+TCB_t *pxTCB;
+
+	if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )
+	{
+		/* The new current delayed list is empty.  Set xNextTaskUnblockTime to
+		the maximum possible value so it is	extremely unlikely that the
+		if( xTickCount >= xNextTaskUnblockTime ) test will pass until
+		there is an item in the delayed list. */
+		xNextTaskUnblockTime = portMAX_DELAY;
+	}
+	else
+	{
+		/* The new current delayed list is not empty, get the value of
+		the item at the head of the delayed list.  This is the time at
+		which the task at the head of the delayed list should be removed
+		from the Blocked state. */
+		( pxTCB ) = listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList ); /*lint !e9079 void * is used as this macro is used with timers and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+		xNextTaskUnblockTime = listGET_LIST_ITEM_VALUE( &( ( pxTCB )->xStateListItem ) );
+	}
+}
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) )
+
+	TaskHandle_t xTaskGetCurrentTaskHandle( void )
+	{
+	TaskHandle_t xReturn;
+
+		/* A critical section is not required as this is not called from
+		an interrupt and the current TCB will always be the same for any
+		individual execution thread. */
+		xReturn = pxCurrentTCB;
+
+		return xReturn;
+	}
+
+#endif /* ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+
+	BaseType_t xTaskGetSchedulerState( void )
+	{
+	BaseType_t xReturn;
+
+		if( xSchedulerRunning == pdFALSE )
+		{
+			xReturn = taskSCHEDULER_NOT_STARTED;
+		}
+		else
+		{
+			if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+			{
+				xReturn = taskSCHEDULER_RUNNING;
+			}
+			else
+			{
+				xReturn = taskSCHEDULER_SUSPENDED;
+			}
+		}
+
+		return xReturn;
+	}
+
+#endif /* ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+	BaseType_t xTaskPriorityInherit( TaskHandle_t const pxMutexHolder )
+	{
+	TCB_t * const pxMutexHolderTCB = pxMutexHolder;
+	BaseType_t xReturn = pdFALSE;
+
+		/* If the mutex was given back by an interrupt while the queue was
+		locked then the mutex holder might now be NULL.  _RB_ Is this still
+		needed as interrupts can no longer use mutexes? */
+		if( pxMutexHolder != NULL )
+		{
+			/* If the holder of the mutex has a priority below the priority of
+			the task attempting to obtain the mutex then it will temporarily
+			inherit the priority of the task attempting to obtain the mutex. */
+			if( pxMutexHolderTCB->uxPriority < pxCurrentTCB->uxPriority )
+			{
+				/* Adjust the mutex holder state to account for its new
+				priority.  Only reset the event list item value if the value is
+				not being used for anything else. */
+				if( ( listGET_LIST_ITEM_VALUE( &( pxMutexHolderTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )
+				{
+					listSET_LIST_ITEM_VALUE( &( pxMutexHolderTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				/* If the task being modified is in the ready state it will need
+				to be moved into a new list. */
+				if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxMutexHolderTCB->uxPriority ] ), &( pxMutexHolderTCB->xStateListItem ) ) != pdFALSE )
+				{
+					if( uxListRemove( &( pxMutexHolderTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+					{
+						/* It is known that the task is in its ready list so
+						there is no need to check again and the port level
+						reset macro can be called directly. */
+						portRESET_READY_PRIORITY( pxMutexHolderTCB->uxPriority, uxTopReadyPriority );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* Inherit the priority before being moved into the new list. */
+					pxMutexHolderTCB->uxPriority = pxCurrentTCB->uxPriority;
+					prvAddTaskToReadyList( pxMutexHolderTCB );
+				}
+				else
+				{
+					/* Just inherit the priority. */
+					pxMutexHolderTCB->uxPriority = pxCurrentTCB->uxPriority;
+				}
+
+				traceTASK_PRIORITY_INHERIT( pxMutexHolderTCB, pxCurrentTCB->uxPriority );
+
+				/* Inheritance occurred. */
+				xReturn = pdTRUE;
+			}
+			else
+			{
+				if( pxMutexHolderTCB->uxBasePriority < pxCurrentTCB->uxPriority )
+				{
+					/* The base priority of the mutex holder is lower than the
+					priority of the task attempting to take the mutex, but the
+					current priority of the mutex holder is not lower than the
+					priority of the task attempting to take the mutex.
+					Therefore the mutex holder must have already inherited a
+					priority, but inheritance would have occurred if that had
+					not been the case. */
+					xReturn = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+	BaseType_t xTaskPriorityDisinherit( TaskHandle_t const pxMutexHolder )
+	{
+	TCB_t * const pxTCB = pxMutexHolder;
+	BaseType_t xReturn = pdFALSE;
+
+		if( pxMutexHolder != NULL )
+		{
+			/* A task can only have an inherited priority if it holds the mutex.
+			If the mutex is held by a task then it cannot be given from an
+			interrupt, and if a mutex is given by the holding task then it must
+			be the running state task. */
+			configASSERT( pxTCB == pxCurrentTCB );
+			configASSERT( pxTCB->uxMutexesHeld );
+			( pxTCB->uxMutexesHeld )--;
+
+			/* Has the holder of the mutex inherited the priority of another
+			task? */
+			if( pxTCB->uxPriority != pxTCB->uxBasePriority )
+			{
+				/* Only disinherit if no other mutexes are held. */
+				if( pxTCB->uxMutexesHeld == ( UBaseType_t ) 0 )
+				{
+					/* A task can only have an inherited priority if it holds
+					the mutex.  If the mutex is held by a task then it cannot be
+					given from an interrupt, and if a mutex is given by the
+					holding task then it must be the running state task.  Remove
+					the holding task from the ready/delayed list. */
+					if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+					{
+						taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* Disinherit the priority before adding the task into the
+					new	ready list. */
+					traceTASK_PRIORITY_DISINHERIT( pxTCB, pxTCB->uxBasePriority );
+					pxTCB->uxPriority = pxTCB->uxBasePriority;
+
+					/* Reset the event list item value.  It cannot be in use for
+					any other purpose if this task is running, and it must be
+					running to give back the mutex. */
+					listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+					prvAddTaskToReadyList( pxTCB );
+
+					/* Return true to indicate that a context switch is required.
+					This is only actually required in the corner case whereby
+					multiple mutexes were held and the mutexes were given back
+					in an order different to that in which they were taken.
+					If a context switch did not occur when the first mutex was
+					returned, even if a task was waiting on it, then a context
+					switch should occur when the last mutex is returned whether
+					a task is waiting on it or not. */
+					xReturn = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+	void vTaskPriorityDisinheritAfterTimeout( TaskHandle_t const pxMutexHolder, UBaseType_t uxHighestPriorityWaitingTask )
+	{
+	TCB_t * const pxTCB = pxMutexHolder;
+	UBaseType_t uxPriorityUsedOnEntry, uxPriorityToUse;
+	const UBaseType_t uxOnlyOneMutexHeld = ( UBaseType_t ) 1;
+
+		if( pxMutexHolder != NULL )
+		{
+			/* If pxMutexHolder is not NULL then the holder must hold at least
+			one mutex. */
+			configASSERT( pxTCB->uxMutexesHeld );
+
+			/* Determine the priority to which the priority of the task that
+			holds the mutex should be set.  This will be the greater of the
+			holding task's base priority and the priority of the highest
+			priority task that is waiting to obtain the mutex. */
+			if( pxTCB->uxBasePriority < uxHighestPriorityWaitingTask )
+			{
+				uxPriorityToUse = uxHighestPriorityWaitingTask;
+			}
+			else
+			{
+				uxPriorityToUse = pxTCB->uxBasePriority;
+			}
+
+			/* Does the priority need to change? */
+			if( pxTCB->uxPriority != uxPriorityToUse )
+			{
+				/* Only disinherit if no other mutexes are held.  This is a
+				simplification in the priority inheritance implementation.  If
+				the task that holds the mutex is also holding other mutexes then
+				the other mutexes may have caused the priority inheritance. */
+				if( pxTCB->uxMutexesHeld == uxOnlyOneMutexHeld )
+				{
+					/* If a task has timed out because it already holds the
+					mutex it was trying to obtain then it cannot of inherited
+					its own priority. */
+					configASSERT( pxTCB != pxCurrentTCB );
+
+					/* Disinherit the priority, remembering the previous
+					priority to facilitate determining the subject task's
+					state. */
+					traceTASK_PRIORITY_DISINHERIT( pxTCB, pxTCB->uxBasePriority );
+					uxPriorityUsedOnEntry = pxTCB->uxPriority;
+					pxTCB->uxPriority = uxPriorityToUse;
+
+					/* Only reset the event list item value if the value is not
+					being used for anything else. */
+					if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )
+					{
+						listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxPriorityToUse ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* If the running task is not the task that holds the mutex
+					then the task that holds the mutex could be in either the
+					Ready, Blocked or Suspended states.  Only remove the task
+					from its current state list if it is in the Ready state as
+					the task's priority is going to change and there is one
+					Ready list per priority. */
+					if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxPriorityUsedOnEntry ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )
+					{
+						if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+						{
+							/* It is known that the task is in its ready list so
+							there is no need to check again and the port level
+							reset macro can be called directly. */
+							portRESET_READY_PRIORITY( pxTCB->uxPriority, uxTopReadyPriority );
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+
+						prvAddTaskToReadyList( pxTCB );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+	void vTaskEnterCritical( void )
+	{
+		portDISABLE_INTERRUPTS();
+
+		if( xSchedulerRunning != pdFALSE )
+		{
+			( pxCurrentTCB->uxCriticalNesting )++;
+
+			/* This is not the interrupt safe version of the enter critical
+			function so	assert() if it is being called from an interrupt
+			context.  Only API functions that end in "FromISR" can be used in an
+			interrupt.  Only assert if the critical nesting count is 1 to
+			protect against recursive calls if the assert function also uses a
+			critical section. */
+			if( pxCurrentTCB->uxCriticalNesting == 1 )
+			{
+				portASSERT_IF_IN_ISR();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* portCRITICAL_NESTING_IN_TCB */
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+	void vTaskExitCritical( void )
+	{
+		if( xSchedulerRunning != pdFALSE )
+		{
+			if( pxCurrentTCB->uxCriticalNesting > 0U )
+			{
+				( pxCurrentTCB->uxCriticalNesting )--;
+
+				if( pxCurrentTCB->uxCriticalNesting == 0U )
+				{
+					portENABLE_INTERRUPTS();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* portCRITICAL_NESTING_IN_TCB */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+	static char *prvWriteNameToBuffer( char *pcBuffer, const char *pcTaskName )
+	{
+	size_t x;
+
+		/* Start by copying the entire string. */
+		strcpy( pcBuffer, pcTaskName );
+
+		/* Pad the end of the string with spaces to ensure columns line up when
+		printed out. */
+		for( x = strlen( pcBuffer ); x < ( size_t ) ( configMAX_TASK_NAME_LEN - 1 ); x++ )
+		{
+			pcBuffer[ x ] = ' ';
+		}
+
+		/* Terminate. */
+		pcBuffer[ x ] = ( char ) 0x00;
+
+		/* Return the new end of string. */
+		return &( pcBuffer[ x ] );
+	}
+
+#endif /* ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	void vTaskList( char * pcWriteBuffer )
+	{
+	TaskStatus_t *pxTaskStatusArray;
+	UBaseType_t uxArraySize, x;
+	char cStatus;
+
+		/*
+		 * PLEASE NOTE:
+		 *
+		 * This function is provided for convenience only, and is used by many
+		 * of the demo applications.  Do not consider it to be part of the
+		 * scheduler.
+		 *
+		 * vTaskList() calls uxTaskGetSystemState(), then formats part of the
+		 * uxTaskGetSystemState() output into a human readable table that
+		 * displays task names, states and stack usage.
+		 *
+		 * vTaskList() has a dependency on the sprintf() C library function that
+		 * might bloat the code size, use a lot of stack, and provide different
+		 * results on different platforms.  An alternative, tiny, third party,
+		 * and limited functionality implementation of sprintf() is provided in
+		 * many of the FreeRTOS/Demo sub-directories in a file called
+		 * printf-stdarg.c (note printf-stdarg.c does not provide a full
+		 * snprintf() implementation!).
+		 *
+		 * It is recommended that production systems call uxTaskGetSystemState()
+		 * directly to get access to raw stats data, rather than indirectly
+		 * through a call to vTaskList().
+		 */
+
+
+		/* Make sure the write buffer does not contain a string. */
+		*pcWriteBuffer = ( char ) 0x00;
+
+		/* Take a snapshot of the number of tasks in case it changes while this
+		function is executing. */
+		uxArraySize = uxCurrentNumberOfTasks;
+
+		/* Allocate an array index for each task.  NOTE!  if
+		configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will
+		equate to NULL. */
+		pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) ); /*lint !e9079 All values returned by pvPortMalloc() have at least the alignment required by the MCU's stack and this allocation allocates a struct that has the alignment requirements of a pointer. */
+
+		if( pxTaskStatusArray != NULL )
+		{
+			/* Generate the (binary) data. */
+			uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, NULL );
+
+			/* Create a human readable table from the binary data. */
+			for( x = 0; x < uxArraySize; x++ )
+			{
+				switch( pxTaskStatusArray[ x ].eCurrentState )
+				{
+					case eRunning:		cStatus = tskRUNNING_CHAR;
+										break;
+
+					case eReady:		cStatus = tskREADY_CHAR;
+										break;
+
+					case eBlocked:		cStatus = tskBLOCKED_CHAR;
+										break;
+
+					case eSuspended:	cStatus = tskSUSPENDED_CHAR;
+										break;
+
+					case eDeleted:		cStatus = tskDELETED_CHAR;
+										break;
+
+					case eInvalid:		/* Fall through. */
+					default:			/* Should not get here, but it is included
+										to prevent static checking errors. */
+										cStatus = ( char ) 0x00;
+										break;
+				}
+
+				/* Write the task name to the string, padding with spaces so it
+				can be printed in tabular form more easily. */
+				pcWriteBuffer = prvWriteNameToBuffer( pcWriteBuffer, pxTaskStatusArray[ x ].pcTaskName );
+
+				/* Write the rest of the string. */
+				sprintf( pcWriteBuffer, "\t%c\t%u\t%u\t%u\r\n", cStatus, ( unsigned int ) pxTaskStatusArray[ x ].uxCurrentPriority, ( unsigned int ) pxTaskStatusArray[ x ].usStackHighWaterMark, ( unsigned int ) pxTaskStatusArray[ x ].xTaskNumber ); /*lint !e586 sprintf() allowed as this is compiled with many compilers and this is a utility function only - not part of the core kernel implementation. */
+				pcWriteBuffer += strlen( pcWriteBuffer ); /*lint !e9016 Pointer arithmetic ok on char pointers especially as in this case where it best denotes the intent of the code. */
+			}
+
+			/* Free the array again.  NOTE!  If configSUPPORT_DYNAMIC_ALLOCATION
+			is 0 then vPortFree() will be #defined to nothing. */
+			vPortFree( pxTaskStatusArray );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */
+/*----------------------------------------------------------*/
+
+#if ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	void vTaskGetRunTimeStats( char *pcWriteBuffer )
+	{
+	TaskStatus_t *pxTaskStatusArray;
+	UBaseType_t uxArraySize, x;
+	uint32_t ulTotalTime, ulStatsAsPercentage;
+
+		#if( configUSE_TRACE_FACILITY != 1 )
+		{
+			#error configUSE_TRACE_FACILITY must also be set to 1 in FreeRTOSConfig.h to use vTaskGetRunTimeStats().
+		}
+		#endif
+
+		/*
+		 * PLEASE NOTE:
+		 *
+		 * This function is provided for convenience only, and is used by many
+		 * of the demo applications.  Do not consider it to be part of the
+		 * scheduler.
+		 *
+		 * vTaskGetRunTimeStats() calls uxTaskGetSystemState(), then formats part
+		 * of the uxTaskGetSystemState() output into a human readable table that
+		 * displays the amount of time each task has spent in the Running state
+		 * in both absolute and percentage terms.
+		 *
+		 * vTaskGetRunTimeStats() has a dependency on the sprintf() C library
+		 * function that might bloat the code size, use a lot of stack, and
+		 * provide different results on different platforms.  An alternative,
+		 * tiny, third party, and limited functionality implementation of
+		 * sprintf() is provided in many of the FreeRTOS/Demo sub-directories in
+		 * a file called printf-stdarg.c (note printf-stdarg.c does not provide
+		 * a full snprintf() implementation!).
+		 *
+		 * It is recommended that production systems call uxTaskGetSystemState()
+		 * directly to get access to raw stats data, rather than indirectly
+		 * through a call to vTaskGetRunTimeStats().
+		 */
+
+		/* Make sure the write buffer does not contain a string. */
+		*pcWriteBuffer = ( char ) 0x00;
+
+		/* Take a snapshot of the number of tasks in case it changes while this
+		function is executing. */
+		uxArraySize = uxCurrentNumberOfTasks;
+
+		/* Allocate an array index for each task.  NOTE!  If
+		configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will
+		equate to NULL. */
+		pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) ); /*lint !e9079 All values returned by pvPortMalloc() have at least the alignment required by the MCU's stack and this allocation allocates a struct that has the alignment requirements of a pointer. */
+
+		if( pxTaskStatusArray != NULL )
+		{
+			/* Generate the (binary) data. */
+			uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, &ulTotalTime );
+
+			/* For percentage calculations. */
+			ulTotalTime /= 100UL;
+
+			/* Avoid divide by zero errors. */
+			if( ulTotalTime > 0UL )
+			{
+				/* Create a human readable table from the binary data. */
+				for( x = 0; x < uxArraySize; x++ )
+				{
+					/* What percentage of the total run time has the task used?
+					This will always be rounded down to the nearest integer.
+					ulTotalRunTimeDiv100 has already been divided by 100. */
+					ulStatsAsPercentage = pxTaskStatusArray[ x ].ulRunTimeCounter / ulTotalTime;
+
+					/* Write the task name to the string, padding with
+					spaces so it can be printed in tabular form more
+					easily. */
+					pcWriteBuffer = prvWriteNameToBuffer( pcWriteBuffer, pxTaskStatusArray[ x ].pcTaskName );
+
+					if( ulStatsAsPercentage > 0UL )
+					{
+						#ifdef portLU_PRINTF_SPECIFIER_REQUIRED
+						{
+							sprintf( pcWriteBuffer, "\t%lu\t\t%lu%%\r\n", pxTaskStatusArray[ x ].ulRunTimeCounter, ulStatsAsPercentage );
+						}
+						#else
+						{
+							/* sizeof( int ) == sizeof( long ) so a smaller
+							printf() library can be used. */
+							sprintf( pcWriteBuffer, "\t%u\t\t%u%%\r\n", ( unsigned int ) pxTaskStatusArray[ x ].ulRunTimeCounter, ( unsigned int ) ulStatsAsPercentage ); /*lint !e586 sprintf() allowed as this is compiled with many compilers and this is a utility function only - not part of the core kernel implementation. */
+						}
+						#endif
+					}
+					else
+					{
+						/* If the percentage is zero here then the task has
+						consumed less than 1% of the total run time. */
+						#ifdef portLU_PRINTF_SPECIFIER_REQUIRED
+						{
+							sprintf( pcWriteBuffer, "\t%lu\t\t<1%%\r\n", pxTaskStatusArray[ x ].ulRunTimeCounter );
+						}
+						#else
+						{
+							/* sizeof( int ) == sizeof( long ) so a smaller
+							printf() library can be used. */
+							sprintf( pcWriteBuffer, "\t%u\t\t<1%%\r\n", ( unsigned int ) pxTaskStatusArray[ x ].ulRunTimeCounter ); /*lint !e586 sprintf() allowed as this is compiled with many compilers and this is a utility function only - not part of the core kernel implementation. */
+						}
+						#endif
+					}
+
+					pcWriteBuffer += strlen( pcWriteBuffer ); /*lint !e9016 Pointer arithmetic ok on char pointers especially as in this case where it best denotes the intent of the code. */
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Free the array again.  NOTE!  If configSUPPORT_DYNAMIC_ALLOCATION
+			is 0 then vPortFree() will be #defined to nothing. */
+			vPortFree( pxTaskStatusArray );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+TickType_t uxTaskResetEventItemValue( void )
+{
+TickType_t uxReturn;
+
+	uxReturn = listGET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ) );
+
+	/* Reset the event list item to its normal value - so it can be used with
+	queues and semaphores. */
+	listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ), ( ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+	return uxReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+	TaskHandle_t pvTaskIncrementMutexHeldCount( void )
+	{
+		/* If xSemaphoreCreateMutex() is called before any tasks have been created
+		then pxCurrentTCB will be NULL. */
+		if( pxCurrentTCB != NULL )
+		{
+			( pxCurrentTCB->uxMutexesHeld )++;
+		}
+
+		return pxCurrentTCB;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait )
+	{
+	uint32_t ulReturn;
+
+		taskENTER_CRITICAL();
+		{
+			/* Only block if the notification count is not already non-zero. */
+			if( pxCurrentTCB->ulNotifiedValue == 0UL )
+			{
+				/* Mark this task as waiting for a notification. */
+				pxCurrentTCB->ucNotifyState = taskWAITING_NOTIFICATION;
+
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+					traceTASK_NOTIFY_TAKE_BLOCK();
+
+					/* All ports are written to allow a yield in a critical
+					section (some will yield immediately, others wait until the
+					critical section exits) - but it is not something that
+					application code should ever do. */
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		taskENTER_CRITICAL();
+		{
+			traceTASK_NOTIFY_TAKE();
+			ulReturn = pxCurrentTCB->ulNotifiedValue;
+
+			if( ulReturn != 0UL )
+			{
+				if( xClearCountOnExit != pdFALSE )
+				{
+					pxCurrentTCB->ulNotifiedValue = 0UL;
+				}
+				else
+				{
+					pxCurrentTCB->ulNotifiedValue = ulReturn - ( uint32_t ) 1;
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			pxCurrentTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+		}
+		taskEXIT_CRITICAL();
+
+		return ulReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+
+		taskENTER_CRITICAL();
+		{
+			/* Only block if a notification is not already pending. */
+			if( pxCurrentTCB->ucNotifyState != taskNOTIFICATION_RECEIVED )
+			{
+				/* Clear bits in the task's notification value as bits may get
+				set	by the notifying task or interrupt.  This can be used to
+				clear the value to zero. */
+				pxCurrentTCB->ulNotifiedValue &= ~ulBitsToClearOnEntry;
+
+				/* Mark this task as waiting for a notification. */
+				pxCurrentTCB->ucNotifyState = taskWAITING_NOTIFICATION;
+
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+					traceTASK_NOTIFY_WAIT_BLOCK();
+
+					/* All ports are written to allow a yield in a critical
+					section (some will yield immediately, others wait until the
+					critical section exits) - but it is not something that
+					application code should ever do. */
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		taskENTER_CRITICAL();
+		{
+			traceTASK_NOTIFY_WAIT();
+
+			if( pulNotificationValue != NULL )
+			{
+				/* Output the current notification value, which may or may not
+				have changed. */
+				*pulNotificationValue = pxCurrentTCB->ulNotifiedValue;
+			}
+
+			/* If ucNotifyValue is set then either the task never entered the
+			blocked state (because a notification was already pending) or the
+			task unblocked because of a notification.  Otherwise the task
+			unblocked because of a timeout. */
+			if( pxCurrentTCB->ucNotifyState != taskNOTIFICATION_RECEIVED )
+			{
+				/* A notification was not received. */
+				xReturn = pdFALSE;
+			}
+			else
+			{
+				/* A notification was already pending or a notification was
+				received while the task was waiting. */
+				pxCurrentTCB->ulNotifiedValue &= ~ulBitsToClearOnExit;
+				xReturn = pdTRUE;
+			}
+
+			pxCurrentTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue )
+	{
+	TCB_t * pxTCB;
+	BaseType_t xReturn = pdPASS;
+	uint8_t ucOriginalNotifyState;
+
+		configASSERT( xTaskToNotify );
+		pxTCB = xTaskToNotify;
+
+		taskENTER_CRITICAL();
+		{
+			if( pulPreviousNotificationValue != NULL )
+			{
+				*pulPreviousNotificationValue = pxTCB->ulNotifiedValue;
+			}
+
+			ucOriginalNotifyState = pxTCB->ucNotifyState;
+
+			pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+			switch( eAction )
+			{
+				case eSetBits	:
+					pxTCB->ulNotifiedValue |= ulValue;
+					break;
+
+				case eIncrement	:
+					( pxTCB->ulNotifiedValue )++;
+					break;
+
+				case eSetValueWithOverwrite	:
+					pxTCB->ulNotifiedValue = ulValue;
+					break;
+
+				case eSetValueWithoutOverwrite :
+					if( ucOriginalNotifyState != taskNOTIFICATION_RECEIVED )
+					{
+						pxTCB->ulNotifiedValue = ulValue;
+					}
+					else
+					{
+						/* The value could not be written to the task. */
+						xReturn = pdFAIL;
+					}
+					break;
+
+				case eNoAction:
+					/* The task is being notified without its notify value being
+					updated. */
+					break;
+
+				default:
+					/* Should not get here if all enums are handled.
+					Artificially force an assert by testing a value the
+					compiler can't assume is const. */
+					configASSERT( pxTCB->ulNotifiedValue == ~0UL );
+
+					break;
+			}
+
+			traceTASK_NOTIFY();
+
+			/* If the task is in the blocked state specifically to wait for a
+			notification then unblock it now. */
+			if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+			{
+				( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+				prvAddTaskToReadyList( pxTCB );
+
+				/* The task should not have been on an event list. */
+				configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+				#if( configUSE_TICKLESS_IDLE != 0 )
+				{
+					/* If a task is blocked waiting for a notification then
+					xNextTaskUnblockTime might be set to the blocked task's time
+					out time.  If the task is unblocked for a reason other than
+					a timeout xNextTaskUnblockTime is normally left unchanged,
+					because it will automatically get reset to a new value when
+					the tick count equals xNextTaskUnblockTime.  However if
+					tickless idling is used it might be more important to enter
+					sleep mode at the earliest possible time - so reset
+					xNextTaskUnblockTime here to ensure it is updated at the
+					earliest possible time. */
+					prvResetNextTaskUnblockTime();
+				}
+				#endif
+
+				if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+				{
+					/* The notified task has a priority above the currently
+					executing task so a yield is required. */
+					taskYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskGenericNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue, BaseType_t *pxHigherPriorityTaskWoken )
+	{
+	TCB_t * pxTCB;
+	uint8_t ucOriginalNotifyState;
+	BaseType_t xReturn = pdPASS;
+	UBaseType_t uxSavedInterruptStatus;
+
+		configASSERT( xTaskToNotify );
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		pxTCB = xTaskToNotify;
+
+		uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			if( pulPreviousNotificationValue != NULL )
+			{
+				*pulPreviousNotificationValue = pxTCB->ulNotifiedValue;
+			}
+
+			ucOriginalNotifyState = pxTCB->ucNotifyState;
+			pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+			switch( eAction )
+			{
+				case eSetBits	:
+					pxTCB->ulNotifiedValue |= ulValue;
+					break;
+
+				case eIncrement	:
+					( pxTCB->ulNotifiedValue )++;
+					break;
+
+				case eSetValueWithOverwrite	:
+					pxTCB->ulNotifiedValue = ulValue;
+					break;
+
+				case eSetValueWithoutOverwrite :
+					if( ucOriginalNotifyState != taskNOTIFICATION_RECEIVED )
+					{
+						pxTCB->ulNotifiedValue = ulValue;
+					}
+					else
+					{
+						/* The value could not be written to the task. */
+						xReturn = pdFAIL;
+					}
+					break;
+
+				case eNoAction :
+					/* The task is being notified without its notify value being
+					updated. */
+					break;
+
+				default:
+					/* Should not get here if all enums are handled.
+					Artificially force an assert by testing a value the
+					compiler can't assume is const. */
+					configASSERT( pxTCB->ulNotifiedValue == ~0UL );
+					break;
+			}
+
+			traceTASK_NOTIFY_FROM_ISR();
+
+			/* If the task is in the blocked state specifically to wait for a
+			notification then unblock it now. */
+			if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+			{
+				/* The task should not have been on an event list. */
+				configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+				if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+				{
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					/* The delayed and ready lists cannot be accessed, so hold
+					this task pending until the scheduler is resumed. */
+					vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+				}
+
+				if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+				{
+					/* The notified task has a priority above the currently
+					executing task so a yield is required. */
+					if( pxHigherPriorityTaskWoken != NULL )
+					{
+						*pxHigherPriorityTaskWoken = pdTRUE;
+					}
+
+					/* Mark that a yield is pending in case the user is not
+					using the "xHigherPriorityTaskWoken" parameter to an ISR
+					safe FreeRTOS function. */
+					xYieldPending = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	void vTaskNotifyGiveFromISR( TaskHandle_t xTaskToNotify, BaseType_t *pxHigherPriorityTaskWoken )
+	{
+	TCB_t * pxTCB;
+	uint8_t ucOriginalNotifyState;
+	UBaseType_t uxSavedInterruptStatus;
+
+		configASSERT( xTaskToNotify );
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		pxTCB = xTaskToNotify;
+
+		uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			ucOriginalNotifyState = pxTCB->ucNotifyState;
+			pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+			/* 'Giving' is equivalent to incrementing a count in a counting
+			semaphore. */
+			( pxTCB->ulNotifiedValue )++;
+
+			traceTASK_NOTIFY_GIVE_FROM_ISR();
+
+			/* If the task is in the blocked state specifically to wait for a
+			notification then unblock it now. */
+			if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+			{
+				/* The task should not have been on an event list. */
+				configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+				if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+				{
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					/* The delayed and ready lists cannot be accessed, so hold
+					this task pending until the scheduler is resumed. */
+					vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+				}
+
+				if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+				{
+					/* The notified task has a priority above the currently
+					executing task so a yield is required. */
+					if( pxHigherPriorityTaskWoken != NULL )
+					{
+						*pxHigherPriorityTaskWoken = pdTRUE;
+					}
+
+					/* Mark that a yield is pending in case the user is not
+					using the "xHigherPriorityTaskWoken" parameter in an ISR
+					safe FreeRTOS function. */
+					xYieldPending = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	BaseType_t xReturn;
+
+		/* If null is passed in here then it is the calling task that is having
+		its notification state cleared. */
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		taskENTER_CRITICAL();
+		{
+			if( pxTCB->ucNotifyState == taskNOTIFICATION_RECEIVED )
+			{
+				pxTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+				xReturn = pdPASS;
+			}
+			else
+			{
+				xReturn = pdFAIL;
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	uint32_t ulTaskNotifyValueClear( TaskHandle_t xTask, uint32_t ulBitsToClear )
+	{
+	TCB_t *pxTCB;
+	uint32_t ulReturn;
+
+		/* If null is passed in here then it is the calling task that is having
+		its notification state cleared. */
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		taskENTER_CRITICAL();
+		{
+			/* Return the notification as it was before the bits were cleared,
+			then clear the bit mask. */
+			ulReturn = pxCurrentTCB->ulNotifiedValue;
+			pxTCB->ulNotifiedValue &= ~ulBitsToClear;
+		}
+		taskEXIT_CRITICAL();
+
+		return ulReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( INCLUDE_xTaskGetIdleTaskHandle == 1 ) )
+
+	uint32_t ulTaskGetIdleRunTimeCounter( void )
+	{
+		return xIdleTaskHandle->ulRunTimeCounter;
+	}
+
+#endif
+/*-----------------------------------------------------------*/
+
+static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely )
+{
+TickType_t xTimeToWake;
+const TickType_t xConstTickCount = xTickCount;
+
+	#if( INCLUDE_xTaskAbortDelay == 1 )
+	{
+		/* About to enter a delayed list, so ensure the ucDelayAborted flag is
+		reset to pdFALSE so it can be detected as having been set to pdTRUE
+		when the task leaves the Blocked state. */
+		pxCurrentTCB->ucDelayAborted = pdFALSE;
+	}
+	#endif
+
+	/* Remove the task from the ready list before adding it to the blocked list
+	as the same list item is used for both lists. */
+	if( uxListRemove( &( pxCurrentTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+	{
+		/* The current task must be in a ready list, so there is no need to
+		check, and the port reset macro can be called directly. */
+		portRESET_READY_PRIORITY( pxCurrentTCB->uxPriority, uxTopReadyPriority ); /*lint !e931 pxCurrentTCB cannot change as it is the calling task.  pxCurrentTCB->uxPriority and uxTopReadyPriority cannot change as called with scheduler suspended or in a critical section. */
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	#if ( INCLUDE_vTaskSuspend == 1 )
+	{
+		if( ( xTicksToWait == portMAX_DELAY ) && ( xCanBlockIndefinitely != pdFALSE ) )
+		{
+			/* Add the task to the suspended task list instead of a delayed task
+			list to ensure it is not woken by a timing event.  It will block
+			indefinitely. */
+			vListInsertEnd( &xSuspendedTaskList, &( pxCurrentTCB->xStateListItem ) );
+		}
+		else
+		{
+			/* Calculate the time at which the task should be woken if the event
+			does not occur.  This may overflow but this doesn't matter, the
+			kernel will manage it correctly. */
+			xTimeToWake = xConstTickCount + xTicksToWait;
+
+			/* The list item will be inserted in wake time order. */
+			listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );
+
+			if( xTimeToWake < xConstTickCount )
+			{
+				/* Wake time has overflowed.  Place this item in the overflow
+				list. */
+				vListInsert( pxOverflowDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+			}
+			else
+			{
+				/* The wake time has not overflowed, so the current block list
+				is used. */
+				vListInsert( pxDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+
+				/* If the task entering the blocked state was placed at the
+				head of the list of blocked tasks then xNextTaskUnblockTime
+				needs to be updated too. */
+				if( xTimeToWake < xNextTaskUnblockTime )
+				{
+					xNextTaskUnblockTime = xTimeToWake;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+	}
+	#else /* INCLUDE_vTaskSuspend */
+	{
+		/* Calculate the time at which the task should be woken if the event
+		does not occur.  This may overflow but this doesn't matter, the kernel
+		will manage it correctly. */
+		xTimeToWake = xConstTickCount + xTicksToWait;
+
+		/* The list item will be inserted in wake time order. */
+		listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );
+
+		if( xTimeToWake < xConstTickCount )
+		{
+			/* Wake time has overflowed.  Place this item in the overflow list. */
+			vListInsert( pxOverflowDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+		}
+		else
+		{
+			/* The wake time has not overflowed, so the current block list is used. */
+			vListInsert( pxDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+
+			/* If the task entering the blocked state was placed at the head of the
+			list of blocked tasks then xNextTaskUnblockTime needs to be updated
+			too. */
+			if( xTimeToWake < xNextTaskUnblockTime )
+			{
+				xNextTaskUnblockTime = xTimeToWake;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		/* Avoid compiler warning when INCLUDE_vTaskSuspend is not 1. */
+		( void ) xCanBlockIndefinitely;
+	}
+	#endif /* INCLUDE_vTaskSuspend */
+}
+
+/* Code below here allows additional code to be inserted into this source file,
+especially where access to file scope functions and data is needed (for example
+when performing module tests). */
+
+#ifdef FREERTOS_MODULE_TEST
+	#include "tasks_test_access_functions.h"
+#endif
+
+
+#if( configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H == 1 )
+
+	#include "freertos_tasks_c_additions.h"
+
+	#ifdef FREERTOS_TASKS_C_ADDITIONS_INIT
+		static void freertos_tasks_c_additions_init( void )
+		{
+			FREERTOS_TASKS_C_ADDITIONS_INIT();
+		}
+	#endif
+
+#endif
+
+
diff --git a/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/timers.c b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/timers.c
new file mode 100644
index 0000000..d10c832
--- /dev/null
+++ b/USB-PD_Provider_1port/Middlewares/Third_Party/FreeRTOS/Source/timers.c
@@ -0,0 +1,1127 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+/* Standard includes. */
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "timers.h"
+
+#if ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 0 )
+	#error configUSE_TIMERS must be set to 1 to make the xTimerPendFunctionCall() function available.
+#endif
+
+/* Lint e9021, e961 and e750 are suppressed as a MISRA exception justified
+because the MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined
+for the header files above, but not in this file, in order to generate the
+correct privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e9021 !e961 !e750. */
+
+
+/* This entire source file will be skipped if the application is not configured
+to include software timer functionality.  This #if is closed at the very bottom
+of this file.  If you want to include software timer functionality then ensure
+configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */
+#if ( configUSE_TIMERS == 1 )
+
+/* Misc definitions. */
+#define tmrNO_DELAY		( TickType_t ) 0U
+
+/* The name assigned to the timer service task.  This can be overridden by
+defining trmTIMER_SERVICE_TASK_NAME in FreeRTOSConfig.h. */
+#ifndef configTIMER_SERVICE_TASK_NAME
+	#define configTIMER_SERVICE_TASK_NAME "Tmr Svc"
+#endif
+
+/* Bit definitions used in the ucStatus member of a timer structure. */
+#define tmrSTATUS_IS_ACTIVE					( ( uint8_t ) 0x01 )
+#define tmrSTATUS_IS_STATICALLY_ALLOCATED	( ( uint8_t ) 0x02 )
+#define tmrSTATUS_IS_AUTORELOAD				( ( uint8_t ) 0x04 )
+
+/* The definition of the timers themselves. */
+typedef struct tmrTimerControl /* The old naming convention is used to prevent breaking kernel aware debuggers. */
+{
+	const char				*pcTimerName;		/*<< Text name.  This is not used by the kernel, it is included simply to make debugging easier. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	ListItem_t				xTimerListItem;		/*<< Standard linked list item as used by all kernel features for event management. */
+	TickType_t				xTimerPeriodInTicks;/*<< How quickly and often the timer expires. */
+	void 					*pvTimerID;			/*<< An ID to identify the timer.  This allows the timer to be identified when the same callback is used for multiple timers. */
+	TimerCallbackFunction_t	pxCallbackFunction;	/*<< The function that will be called when the timer expires. */
+	#if( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t			uxTimerNumber;		/*<< An ID assigned by trace tools such as FreeRTOS+Trace */
+	#endif
+	uint8_t 				ucStatus;			/*<< Holds bits to say if the timer was statically allocated or not, and if it is active or not. */
+} xTIMER;
+
+/* The old xTIMER name is maintained above then typedefed to the new Timer_t
+name below to enable the use of older kernel aware debuggers. */
+typedef xTIMER Timer_t;
+
+/* The definition of messages that can be sent and received on the timer queue.
+Two types of message can be queued - messages that manipulate a software timer,
+and messages that request the execution of a non-timer related callback.  The
+two message types are defined in two separate structures, xTimerParametersType
+and xCallbackParametersType respectively. */
+typedef struct tmrTimerParameters
+{
+	TickType_t			xMessageValue;		/*<< An optional value used by a subset of commands, for example, when changing the period of a timer. */
+	Timer_t *			pxTimer;			/*<< The timer to which the command will be applied. */
+} TimerParameter_t;
+
+
+typedef struct tmrCallbackParameters
+{
+	PendedFunction_t	pxCallbackFunction;	/* << The callback function to execute. */
+	void *pvParameter1;						/* << The value that will be used as the callback functions first parameter. */
+	uint32_t ulParameter2;					/* << The value that will be used as the callback functions second parameter. */
+} CallbackParameters_t;
+
+/* The structure that contains the two message types, along with an identifier
+that is used to determine which message type is valid. */
+typedef struct tmrTimerQueueMessage
+{
+	BaseType_t			xMessageID;			/*<< The command being sent to the timer service task. */
+	union
+	{
+		TimerParameter_t xTimerParameters;
+
+		/* Don't include xCallbackParameters if it is not going to be used as
+		it makes the structure (and therefore the timer queue) larger. */
+		#if ( INCLUDE_xTimerPendFunctionCall == 1 )
+			CallbackParameters_t xCallbackParameters;
+		#endif /* INCLUDE_xTimerPendFunctionCall */
+	} u;
+} DaemonTaskMessage_t;
+
+/*lint -save -e956 A manual analysis and inspection has been used to determine
+which static variables must be declared volatile. */
+
+/* The list in which active timers are stored.  Timers are referenced in expire
+time order, with the nearest expiry time at the front of the list.  Only the
+timer service task is allowed to access these lists.
+xActiveTimerList1 and xActiveTimerList2 could be at function scope but that
+breaks some kernel aware debuggers, and debuggers that reply on removing the
+static qualifier. */
+PRIVILEGED_DATA static List_t xActiveTimerList1;
+PRIVILEGED_DATA static List_t xActiveTimerList2;
+PRIVILEGED_DATA static List_t *pxCurrentTimerList;
+PRIVILEGED_DATA static List_t *pxOverflowTimerList;
+
+/* A queue that is used to send commands to the timer service task. */
+PRIVILEGED_DATA static QueueHandle_t xTimerQueue = NULL;
+PRIVILEGED_DATA static TaskHandle_t xTimerTaskHandle = NULL;
+
+/*lint -restore */
+
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	/* If static allocation is supported then the application must provide the
+	following callback function - which enables the application to optionally
+	provide the memory that will be used by the timer task as the task's stack
+	and TCB. */
+	extern void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize );
+
+#endif
+
+/*
+ * Initialise the infrastructure used by the timer service task if it has not
+ * been initialised already.
+ */
+static void prvCheckForValidListAndQueue( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The timer service task (daemon).  Timer functionality is controlled by this
+ * task.  Other tasks communicate with the timer service task using the
+ * xTimerQueue queue.
+ */
+static portTASK_FUNCTION_PROTO( prvTimerTask, pvParameters ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called by the timer service task to interpret and process a command it
+ * received on the timer queue.
+ */
+static void prvProcessReceivedCommands( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Insert the timer into either xActiveTimerList1, or xActiveTimerList2,
+ * depending on if the expire time causes a timer counter overflow.
+ */
+static BaseType_t prvInsertTimerInActiveList( Timer_t * const pxTimer, const TickType_t xNextExpiryTime, const TickType_t xTimeNow, const TickType_t xCommandTime ) PRIVILEGED_FUNCTION;
+
+/*
+ * An active timer has reached its expire time.  Reload the timer if it is an
+ * auto-reload timer, then call its callback.
+ */
+static void prvProcessExpiredTimer( const TickType_t xNextExpireTime, const TickType_t xTimeNow ) PRIVILEGED_FUNCTION;
+
+/*
+ * The tick count has overflowed.  Switch the timer lists after ensuring the
+ * current timer list does not still reference some timers.
+ */
+static void prvSwitchTimerLists( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Obtain the current tick count, setting *pxTimerListsWereSwitched to pdTRUE
+ * if a tick count overflow occurred since prvSampleTimeNow() was last called.
+ */
+static TickType_t prvSampleTimeNow( BaseType_t * const pxTimerListsWereSwitched ) PRIVILEGED_FUNCTION;
+
+/*
+ * If the timer list contains any active timers then return the expire time of
+ * the timer that will expire first and set *pxListWasEmpty to false.  If the
+ * timer list does not contain any timers then return 0 and set *pxListWasEmpty
+ * to pdTRUE.
+ */
+static TickType_t prvGetNextExpireTime( BaseType_t * const pxListWasEmpty ) PRIVILEGED_FUNCTION;
+
+/*
+ * If a timer has expired, process it.  Otherwise, block the timer service task
+ * until either a timer does expire or a command is received.
+ */
+static void prvProcessTimerOrBlockTask( const TickType_t xNextExpireTime, BaseType_t xListWasEmpty ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called after a Timer_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewTimer(	const char * const pcTimerName,			/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+									const TickType_t xTimerPeriodInTicks,
+									const UBaseType_t uxAutoReload,
+									void * const pvTimerID,
+									TimerCallbackFunction_t pxCallbackFunction,
+									Timer_t *pxNewTimer ) PRIVILEGED_FUNCTION;
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerCreateTimerTask( void )
+{
+BaseType_t xReturn = pdFAIL;
+
+	/* This function is called when the scheduler is started if
+	configUSE_TIMERS is set to 1.  Check that the infrastructure used by the
+	timer service task has been created/initialised.  If timers have already
+	been created then the initialisation will already have been performed. */
+	prvCheckForValidListAndQueue();
+
+	if( xTimerQueue != NULL )
+	{
+		#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+		{
+			StaticTask_t *pxTimerTaskTCBBuffer = NULL;
+			StackType_t *pxTimerTaskStackBuffer = NULL;
+			uint32_t ulTimerTaskStackSize;
+
+			vApplicationGetTimerTaskMemory( &pxTimerTaskTCBBuffer, &pxTimerTaskStackBuffer, &ulTimerTaskStackSize );
+			xTimerTaskHandle = xTaskCreateStatic(	prvTimerTask,
+													configTIMER_SERVICE_TASK_NAME,
+													ulTimerTaskStackSize,
+													NULL,
+													( ( UBaseType_t ) configTIMER_TASK_PRIORITY ) | portPRIVILEGE_BIT,
+													pxTimerTaskStackBuffer,
+													pxTimerTaskTCBBuffer );
+
+			if( xTimerTaskHandle != NULL )
+			{
+				xReturn = pdPASS;
+			}
+		}
+		#else
+		{
+			xReturn = xTaskCreate(	prvTimerTask,
+									configTIMER_SERVICE_TASK_NAME,
+									configTIMER_TASK_STACK_DEPTH,
+									NULL,
+									( ( UBaseType_t ) configTIMER_TASK_PRIORITY ) | portPRIVILEGE_BIT,
+									&xTimerTaskHandle );
+		}
+		#endif /* configSUPPORT_STATIC_ALLOCATION */
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	configASSERT( xReturn );
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+	TimerHandle_t xTimerCreate(	const char * const pcTimerName,			/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+								const TickType_t xTimerPeriodInTicks,
+								const UBaseType_t uxAutoReload,
+								void * const pvTimerID,
+								TimerCallbackFunction_t pxCallbackFunction )
+	{
+	Timer_t *pxNewTimer;
+
+		pxNewTimer = ( Timer_t * ) pvPortMalloc( sizeof( Timer_t ) ); /*lint !e9087 !e9079 All values returned by pvPortMalloc() have at least the alignment required by the MCU's stack, and the first member of Timer_t is always a pointer to the timer's mame. */
+
+		if( pxNewTimer != NULL )
+		{
+			/* Status is thus far zero as the timer is not created statically
+			and has not been started.  The auto-reload bit may get set in
+			prvInitialiseNewTimer. */
+			pxNewTimer->ucStatus = 0x00;
+			prvInitialiseNewTimer( pcTimerName, xTimerPeriodInTicks, uxAutoReload, pvTimerID, pxCallbackFunction, pxNewTimer );
+		}
+
+		return pxNewTimer;
+	}
+
+#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	TimerHandle_t xTimerCreateStatic(	const char * const pcTimerName,		/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+										const TickType_t xTimerPeriodInTicks,
+										const UBaseType_t uxAutoReload,
+										void * const pvTimerID,
+										TimerCallbackFunction_t pxCallbackFunction,
+										StaticTimer_t *pxTimerBuffer )
+	{
+	Timer_t *pxNewTimer;
+
+		#if( configASSERT_DEFINED == 1 )
+		{
+			/* Sanity check that the size of the structure used to declare a
+			variable of type StaticTimer_t equals the size of the real timer
+			structure. */
+			volatile size_t xSize = sizeof( StaticTimer_t );
+			configASSERT( xSize == sizeof( Timer_t ) );
+			( void ) xSize; /* Keeps lint quiet when configASSERT() is not defined. */
+		}
+		#endif /* configASSERT_DEFINED */
+
+		/* A pointer to a StaticTimer_t structure MUST be provided, use it. */
+		configASSERT( pxTimerBuffer );
+		pxNewTimer = ( Timer_t * ) pxTimerBuffer; /*lint !e740 !e9087 StaticTimer_t is a pointer to a Timer_t, so guaranteed to be aligned and sized correctly (checked by an assert()), so this is safe. */
+
+		if( pxNewTimer != NULL )
+		{
+			/* Timers can be created statically or dynamically so note this
+			timer was created statically in case it is later deleted.  The
+			auto-reload bit may get set in prvInitialiseNewTimer(). */
+			pxNewTimer->ucStatus = tmrSTATUS_IS_STATICALLY_ALLOCATED;
+
+			prvInitialiseNewTimer( pcTimerName, xTimerPeriodInTicks, uxAutoReload, pvTimerID, pxCallbackFunction, pxNewTimer );
+		}
+
+		return pxNewTimer;
+	}
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewTimer(	const char * const pcTimerName,			/*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+									const TickType_t xTimerPeriodInTicks,
+									const UBaseType_t uxAutoReload,
+									void * const pvTimerID,
+									TimerCallbackFunction_t pxCallbackFunction,
+									Timer_t *pxNewTimer )
+{
+	/* 0 is not a valid value for xTimerPeriodInTicks. */
+	configASSERT( ( xTimerPeriodInTicks > 0 ) );
+
+	if( pxNewTimer != NULL )
+	{
+		/* Ensure the infrastructure used by the timer service task has been
+		created/initialised. */
+		prvCheckForValidListAndQueue();
+
+		/* Initialise the timer structure members using the function
+		parameters. */
+		pxNewTimer->pcTimerName = pcTimerName;
+		pxNewTimer->xTimerPeriodInTicks = xTimerPeriodInTicks;
+		pxNewTimer->pvTimerID = pvTimerID;
+		pxNewTimer->pxCallbackFunction = pxCallbackFunction;
+		vListInitialiseItem( &( pxNewTimer->xTimerListItem ) );
+		if( uxAutoReload != pdFALSE )
+		{
+			pxNewTimer->ucStatus |= tmrSTATUS_IS_AUTORELOAD;
+		}
+		traceTIMER_CREATE( pxNewTimer );
+	}
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait )
+{
+BaseType_t xReturn = pdFAIL;
+DaemonTaskMessage_t xMessage;
+
+	configASSERT( xTimer );
+
+	/* Send a message to the timer service task to perform a particular action
+	on a particular timer definition. */
+	if( xTimerQueue != NULL )
+	{
+		/* Send a command to the timer service task to start the xTimer timer. */
+		xMessage.xMessageID = xCommandID;
+		xMessage.u.xTimerParameters.xMessageValue = xOptionalValue;
+		xMessage.u.xTimerParameters.pxTimer = xTimer;
+
+		if( xCommandID < tmrFIRST_FROM_ISR_COMMAND )
+		{
+			if( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
+			{
+				xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xTicksToWait );
+			}
+			else
+			{
+				xReturn = xQueueSendToBack( xTimerQueue, &xMessage, tmrNO_DELAY );
+			}
+		}
+		else
+		{
+			xReturn = xQueueSendToBackFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );
+		}
+
+		traceTIMER_COMMAND_SEND( xTimer, xCommandID, xOptionalValue, xReturn );
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+TaskHandle_t xTimerGetTimerDaemonTaskHandle( void )
+{
+	/* If xTimerGetTimerDaemonTaskHandle() is called before the scheduler has been
+	started, then xTimerTaskHandle will be NULL. */
+	configASSERT( ( xTimerTaskHandle != NULL ) );
+	return xTimerTaskHandle;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTimerGetPeriod( TimerHandle_t xTimer )
+{
+Timer_t *pxTimer = xTimer;
+
+	configASSERT( xTimer );
+	return pxTimer->xTimerPeriodInTicks;
+}
+/*-----------------------------------------------------------*/
+
+void vTimerSetReloadMode( TimerHandle_t xTimer, const UBaseType_t uxAutoReload )
+{
+Timer_t * pxTimer =  xTimer;
+
+	configASSERT( xTimer );
+	taskENTER_CRITICAL();
+	{
+		if( uxAutoReload != pdFALSE )
+		{
+			pxTimer->ucStatus |= tmrSTATUS_IS_AUTORELOAD;
+		}
+		else
+		{
+			pxTimer->ucStatus &= ~tmrSTATUS_IS_AUTORELOAD;
+		}
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxTimerGetReloadMode( TimerHandle_t xTimer )
+{
+Timer_t * pxTimer =  xTimer;
+UBaseType_t uxReturn;
+
+	configASSERT( xTimer );
+	taskENTER_CRITICAL();
+	{
+		if( ( pxTimer->ucStatus & tmrSTATUS_IS_AUTORELOAD ) == 0 )
+		{
+			/* Not an auto-reload timer. */
+			uxReturn = ( UBaseType_t ) pdFALSE;
+		}
+		else
+		{
+			/* Is an auto-reload timer. */
+			uxReturn = ( UBaseType_t ) pdTRUE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return uxReturn;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer )
+{
+Timer_t * pxTimer =  xTimer;
+TickType_t xReturn;
+
+	configASSERT( xTimer );
+	xReturn = listGET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ) );
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+const char * pcTimerGetName( TimerHandle_t xTimer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+Timer_t *pxTimer = xTimer;
+
+	configASSERT( xTimer );
+	return pxTimer->pcTimerName;
+}
+/*-----------------------------------------------------------*/
+
+static void prvProcessExpiredTimer( const TickType_t xNextExpireTime, const TickType_t xTimeNow )
+{
+BaseType_t xResult;
+Timer_t * const pxTimer = ( Timer_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList ); /*lint !e9087 !e9079 void * is used as this macro is used with tasks and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+
+	/* Remove the timer from the list of active timers.  A check has already
+	been performed to ensure the list is not empty. */
+	( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+	traceTIMER_EXPIRED( pxTimer );
+
+	/* If the timer is an auto-reload timer then calculate the next
+	expiry time and re-insert the timer in the list of active timers. */
+	if( ( pxTimer->ucStatus & tmrSTATUS_IS_AUTORELOAD ) != 0 )
+	{
+		/* The timer is inserted into a list using a time relative to anything
+		other than the current time.  It will therefore be inserted into the
+		correct list relative to the time this task thinks it is now. */
+		if( prvInsertTimerInActiveList( pxTimer, ( xNextExpireTime + pxTimer->xTimerPeriodInTicks ), xTimeNow, xNextExpireTime ) != pdFALSE )
+		{
+			/* The timer expired before it was added to the active timer
+			list.  Reload it now.  */
+			xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xNextExpireTime, NULL, tmrNO_DELAY );
+			configASSERT( xResult );
+			( void ) xResult;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		pxTimer->ucStatus &= ~tmrSTATUS_IS_ACTIVE;
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	/* Call the timer callback. */
+	pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+}
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( prvTimerTask, pvParameters )
+{
+TickType_t xNextExpireTime;
+BaseType_t xListWasEmpty;
+
+	/* Just to avoid compiler warnings. */
+	( void ) pvParameters;
+
+	#if( configUSE_DAEMON_TASK_STARTUP_HOOK == 1 )
+	{
+		extern void vApplicationDaemonTaskStartupHook( void );
+
+		/* Allow the application writer to execute some code in the context of
+		this task at the point the task starts executing.  This is useful if the
+		application includes initialisation code that would benefit from
+		executing after the scheduler has been started. */
+		vApplicationDaemonTaskStartupHook();
+	}
+	#endif /* configUSE_DAEMON_TASK_STARTUP_HOOK */
+
+	for( ;; )
+	{
+		/* Query the timers list to see if it contains any timers, and if so,
+		obtain the time at which the next timer will expire. */
+		xNextExpireTime = prvGetNextExpireTime( &xListWasEmpty );
+
+		/* If a timer has expired, process it.  Otherwise, block this task
+		until either a timer does expire, or a command is received. */
+		prvProcessTimerOrBlockTask( xNextExpireTime, xListWasEmpty );
+
+		/* Empty the command queue. */
+		prvProcessReceivedCommands();
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvProcessTimerOrBlockTask( const TickType_t xNextExpireTime, BaseType_t xListWasEmpty )
+{
+TickType_t xTimeNow;
+BaseType_t xTimerListsWereSwitched;
+
+	vTaskSuspendAll();
+	{
+		/* Obtain the time now to make an assessment as to whether the timer
+		has expired or not.  If obtaining the time causes the lists to switch
+		then don't process this timer as any timers that remained in the list
+		when the lists were switched will have been processed within the
+		prvSampleTimeNow() function. */
+		xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );
+		if( xTimerListsWereSwitched == pdFALSE )
+		{
+			/* The tick count has not overflowed, has the timer expired? */
+			if( ( xListWasEmpty == pdFALSE ) && ( xNextExpireTime <= xTimeNow ) )
+			{
+				( void ) xTaskResumeAll();
+				prvProcessExpiredTimer( xNextExpireTime, xTimeNow );
+			}
+			else
+			{
+				/* The tick count has not overflowed, and the next expire
+				time has not been reached yet.  This task should therefore
+				block to wait for the next expire time or a command to be
+				received - whichever comes first.  The following line cannot
+				be reached unless xNextExpireTime > xTimeNow, except in the
+				case when the current timer list is empty. */
+				if( xListWasEmpty != pdFALSE )
+				{
+					/* The current timer list is empty - is the overflow list
+					also empty? */
+					xListWasEmpty = listLIST_IS_EMPTY( pxOverflowTimerList );
+				}
+
+				vQueueWaitForMessageRestricted( xTimerQueue, ( xNextExpireTime - xTimeNow ), xListWasEmpty );
+
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					/* Yield to wait for either a command to arrive, or the
+					block time to expire.  If a command arrived between the
+					critical section being exited and this yield then the yield
+					will not cause the task to block. */
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		else
+		{
+			( void ) xTaskResumeAll();
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+static TickType_t prvGetNextExpireTime( BaseType_t * const pxListWasEmpty )
+{
+TickType_t xNextExpireTime;
+
+	/* Timers are listed in expiry time order, with the head of the list
+	referencing the task that will expire first.  Obtain the time at which
+	the timer with the nearest expiry time will expire.  If there are no
+	active timers then just set the next expire time to 0.  That will cause
+	this task to unblock when the tick count overflows, at which point the
+	timer lists will be switched and the next expiry time can be
+	re-assessed.  */
+	*pxListWasEmpty = listLIST_IS_EMPTY( pxCurrentTimerList );
+	if( *pxListWasEmpty == pdFALSE )
+	{
+		xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
+	}
+	else
+	{
+		/* Ensure the task unblocks when the tick count rolls over. */
+		xNextExpireTime = ( TickType_t ) 0U;
+	}
+
+	return xNextExpireTime;
+}
+/*-----------------------------------------------------------*/
+
+static TickType_t prvSampleTimeNow( BaseType_t * const pxTimerListsWereSwitched )
+{
+TickType_t xTimeNow;
+PRIVILEGED_DATA static TickType_t xLastTime = ( TickType_t ) 0U; /*lint !e956 Variable is only accessible to one task. */
+
+	xTimeNow = xTaskGetTickCount();
+
+	if( xTimeNow < xLastTime )
+	{
+		prvSwitchTimerLists();
+		*pxTimerListsWereSwitched = pdTRUE;
+	}
+	else
+	{
+		*pxTimerListsWereSwitched = pdFALSE;
+	}
+
+	xLastTime = xTimeNow;
+
+	return xTimeNow;
+}
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvInsertTimerInActiveList( Timer_t * const pxTimer, const TickType_t xNextExpiryTime, const TickType_t xTimeNow, const TickType_t xCommandTime )
+{
+BaseType_t xProcessTimerNow = pdFALSE;
+
+	listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xNextExpiryTime );
+	listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );
+
+	if( xNextExpiryTime <= xTimeNow )
+	{
+		/* Has the expiry time elapsed between the command to start/reset a
+		timer was issued, and the time the command was processed? */
+		if( ( ( TickType_t ) ( xTimeNow - xCommandTime ) ) >= pxTimer->xTimerPeriodInTicks ) /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+		{
+			/* The time between a command being issued and the command being
+			processed actually exceeds the timers period.  */
+			xProcessTimerNow = pdTRUE;
+		}
+		else
+		{
+			vListInsert( pxOverflowTimerList, &( pxTimer->xTimerListItem ) );
+		}
+	}
+	else
+	{
+		if( ( xTimeNow < xCommandTime ) && ( xNextExpiryTime >= xCommandTime ) )
+		{
+			/* If, since the command was issued, the tick count has overflowed
+			but the expiry time has not, then the timer must have already passed
+			its expiry time and should be processed immediately. */
+			xProcessTimerNow = pdTRUE;
+		}
+		else
+		{
+			vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );
+		}
+	}
+
+	return xProcessTimerNow;
+}
+/*-----------------------------------------------------------*/
+
+static void	prvProcessReceivedCommands( void )
+{
+DaemonTaskMessage_t xMessage;
+Timer_t *pxTimer;
+BaseType_t xTimerListsWereSwitched, xResult;
+TickType_t xTimeNow;
+
+	while( xQueueReceive( xTimerQueue, &xMessage, tmrNO_DELAY ) != pdFAIL ) /*lint !e603 xMessage does not have to be initialised as it is passed out, not in, and it is not used unless xQueueReceive() returns pdTRUE. */
+	{
+		#if ( INCLUDE_xTimerPendFunctionCall == 1 )
+		{
+			/* Negative commands are pended function calls rather than timer
+			commands. */
+			if( xMessage.xMessageID < ( BaseType_t ) 0 )
+			{
+				const CallbackParameters_t * const pxCallback = &( xMessage.u.xCallbackParameters );
+
+				/* The timer uses the xCallbackParameters member to request a
+				callback be executed.  Check the callback is not NULL. */
+				configASSERT( pxCallback );
+
+				/* Call the function. */
+				pxCallback->pxCallbackFunction( pxCallback->pvParameter1, pxCallback->ulParameter2 );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* INCLUDE_xTimerPendFunctionCall */
+
+		/* Commands that are positive are timer commands rather than pended
+		function calls. */
+		if( xMessage.xMessageID >= ( BaseType_t ) 0 )
+		{
+			/* The messages uses the xTimerParameters member to work on a
+			software timer. */
+			pxTimer = xMessage.u.xTimerParameters.pxTimer;
+
+			if( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) == pdFALSE ) /*lint !e961. The cast is only redundant when NULL is passed into the macro. */
+			{
+				/* The timer is in a list, remove it. */
+				( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			traceTIMER_COMMAND_RECEIVED( pxTimer, xMessage.xMessageID, xMessage.u.xTimerParameters.xMessageValue );
+
+			/* In this case the xTimerListsWereSwitched parameter is not used, but
+			it must be present in the function call.  prvSampleTimeNow() must be
+			called after the message is received from xTimerQueue so there is no
+			possibility of a higher priority task adding a message to the message
+			queue with a time that is ahead of the timer daemon task (because it
+			pre-empted the timer daemon task after the xTimeNow value was set). */
+			xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );
+
+			switch( xMessage.xMessageID )
+			{
+				case tmrCOMMAND_START :
+				case tmrCOMMAND_START_FROM_ISR :
+				case tmrCOMMAND_RESET :
+				case tmrCOMMAND_RESET_FROM_ISR :
+				case tmrCOMMAND_START_DONT_TRACE :
+					/* Start or restart a timer. */
+					pxTimer->ucStatus |= tmrSTATUS_IS_ACTIVE;
+					if( prvInsertTimerInActiveList( pxTimer,  xMessage.u.xTimerParameters.xMessageValue + pxTimer->xTimerPeriodInTicks, xTimeNow, xMessage.u.xTimerParameters.xMessageValue ) != pdFALSE )
+					{
+						/* The timer expired before it was added to the active
+						timer list.  Process it now. */
+						pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+						traceTIMER_EXPIRED( pxTimer );
+
+						if( ( pxTimer->ucStatus & tmrSTATUS_IS_AUTORELOAD ) != 0 )
+						{
+							xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xMessage.u.xTimerParameters.xMessageValue + pxTimer->xTimerPeriodInTicks, NULL, tmrNO_DELAY );
+							configASSERT( xResult );
+							( void ) xResult;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+					break;
+
+				case tmrCOMMAND_STOP :
+				case tmrCOMMAND_STOP_FROM_ISR :
+					/* The timer has already been removed from the active list. */
+					pxTimer->ucStatus &= ~tmrSTATUS_IS_ACTIVE;
+					break;
+
+				case tmrCOMMAND_CHANGE_PERIOD :
+				case tmrCOMMAND_CHANGE_PERIOD_FROM_ISR :
+					pxTimer->ucStatus |= tmrSTATUS_IS_ACTIVE;
+					pxTimer->xTimerPeriodInTicks = xMessage.u.xTimerParameters.xMessageValue;
+					configASSERT( ( pxTimer->xTimerPeriodInTicks > 0 ) );
+
+					/* The new period does not really have a reference, and can
+					be longer or shorter than the old one.  The command time is
+					therefore set to the current time, and as the period cannot
+					be zero the next expiry time can only be in the future,
+					meaning (unlike for the xTimerStart() case above) there is
+					no fail case that needs to be handled here. */
+					( void ) prvInsertTimerInActiveList( pxTimer, ( xTimeNow + pxTimer->xTimerPeriodInTicks ), xTimeNow, xTimeNow );
+					break;
+
+				case tmrCOMMAND_DELETE :
+					#if ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+					{
+						/* The timer has already been removed from the active list,
+						just free up the memory if the memory was dynamically
+						allocated. */
+						if( ( pxTimer->ucStatus & tmrSTATUS_IS_STATICALLY_ALLOCATED ) == ( uint8_t ) 0 )
+						{
+							vPortFree( pxTimer );
+						}
+						else
+						{
+							pxTimer->ucStatus &= ~tmrSTATUS_IS_ACTIVE;
+						}
+					}
+					#else
+					{
+						/* If dynamic allocation is not enabled, the memory
+						could not have been dynamically allocated. So there is
+						no need to free the memory - just mark the timer as
+						"not active". */
+						pxTimer->ucStatus &= ~tmrSTATUS_IS_ACTIVE;
+					}
+					#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+					break;
+
+				default	:
+					/* Don't expect to get here. */
+					break;
+			}
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvSwitchTimerLists( void )
+{
+TickType_t xNextExpireTime, xReloadTime;
+List_t *pxTemp;
+Timer_t *pxTimer;
+BaseType_t xResult;
+
+	/* The tick count has overflowed.  The timer lists must be switched.
+	If there are any timers still referenced from the current timer list
+	then they must have expired and should be processed before the lists
+	are switched. */
+	while( listLIST_IS_EMPTY( pxCurrentTimerList ) == pdFALSE )
+	{
+		xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
+
+		/* Remove the timer from the list. */
+		pxTimer = ( Timer_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList ); /*lint !e9087 !e9079 void * is used as this macro is used with tasks and co-routines too.  Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */
+		( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+		traceTIMER_EXPIRED( pxTimer );
+
+		/* Execute its callback, then send a command to restart the timer if
+		it is an auto-reload timer.  It cannot be restarted here as the lists
+		have not yet been switched. */
+		pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+
+		if( ( pxTimer->ucStatus & tmrSTATUS_IS_AUTORELOAD ) != 0 )
+		{
+			/* Calculate the reload value, and if the reload value results in
+			the timer going into the same timer list then it has already expired
+			and the timer should be re-inserted into the current list so it is
+			processed again within this loop.  Otherwise a command should be sent
+			to restart the timer to ensure it is only inserted into a list after
+			the lists have been swapped. */
+			xReloadTime = ( xNextExpireTime + pxTimer->xTimerPeriodInTicks );
+			if( xReloadTime > xNextExpireTime )
+			{
+				listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xReloadTime );
+				listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );
+				vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );
+			}
+			else
+			{
+				xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xNextExpireTime, NULL, tmrNO_DELAY );
+				configASSERT( xResult );
+				( void ) xResult;
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+	pxTemp = pxCurrentTimerList;
+	pxCurrentTimerList = pxOverflowTimerList;
+	pxOverflowTimerList = pxTemp;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckForValidListAndQueue( void )
+{
+	/* Check that the list from which active timers are referenced, and the
+	queue used to communicate with the timer service, have been
+	initialised. */
+	taskENTER_CRITICAL();
+	{
+		if( xTimerQueue == NULL )
+		{
+			vListInitialise( &xActiveTimerList1 );
+			vListInitialise( &xActiveTimerList2 );
+			pxCurrentTimerList = &xActiveTimerList1;
+			pxOverflowTimerList = &xActiveTimerList2;
+
+			#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+			{
+				/* The timer queue is allocated statically in case
+				configSUPPORT_DYNAMIC_ALLOCATION is 0. */
+				static StaticQueue_t xStaticTimerQueue; /*lint !e956 Ok to declare in this manner to prevent additional conditional compilation guards in other locations. */
+				static uint8_t ucStaticTimerQueueStorage[ ( size_t ) configTIMER_QUEUE_LENGTH * sizeof( DaemonTaskMessage_t ) ]; /*lint !e956 Ok to declare in this manner to prevent additional conditional compilation guards in other locations. */
+
+				xTimerQueue = xQueueCreateStatic( ( UBaseType_t ) configTIMER_QUEUE_LENGTH, ( UBaseType_t ) sizeof( DaemonTaskMessage_t ), &( ucStaticTimerQueueStorage[ 0 ] ), &xStaticTimerQueue );
+			}
+			#else
+			{
+				xTimerQueue = xQueueCreate( ( UBaseType_t ) configTIMER_QUEUE_LENGTH, sizeof( DaemonTaskMessage_t ) );
+			}
+			#endif
+
+			#if ( configQUEUE_REGISTRY_SIZE > 0 )
+			{
+				if( xTimerQueue != NULL )
+				{
+					vQueueAddToRegistry( xTimerQueue, "TmrQ" );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			#endif /* configQUEUE_REGISTRY_SIZE */
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer )
+{
+BaseType_t xReturn;
+Timer_t *pxTimer = xTimer;
+
+	configASSERT( xTimer );
+
+	/* Is the timer in the list of active timers? */
+	taskENTER_CRITICAL();
+	{
+		if( ( pxTimer->ucStatus & tmrSTATUS_IS_ACTIVE ) == 0 )
+		{
+			xReturn = pdFALSE;
+		}
+		else
+		{
+			xReturn = pdTRUE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+} /*lint !e818 Can't be pointer to const due to the typedef. */
+/*-----------------------------------------------------------*/
+
+void *pvTimerGetTimerID( const TimerHandle_t xTimer )
+{
+Timer_t * const pxTimer = xTimer;
+void *pvReturn;
+
+	configASSERT( xTimer );
+
+	taskENTER_CRITICAL();
+	{
+		pvReturn = pxTimer->pvTimerID;
+	}
+	taskEXIT_CRITICAL();
+
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID )
+{
+Timer_t * const pxTimer = xTimer;
+
+	configASSERT( xTimer );
+
+	taskENTER_CRITICAL();
+	{
+		pxTimer->pvTimerID = pvNewID;
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+#if( INCLUDE_xTimerPendFunctionCall == 1 )
+
+	BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, BaseType_t *pxHigherPriorityTaskWoken )
+	{
+	DaemonTaskMessage_t xMessage;
+	BaseType_t xReturn;
+
+		/* Complete the message with the function parameters and post it to the
+		daemon task. */
+		xMessage.xMessageID = tmrCOMMAND_EXECUTE_CALLBACK_FROM_ISR;
+		xMessage.u.xCallbackParameters.pxCallbackFunction = xFunctionToPend;
+		xMessage.u.xCallbackParameters.pvParameter1 = pvParameter1;
+		xMessage.u.xCallbackParameters.ulParameter2 = ulParameter2;
+
+		xReturn = xQueueSendFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );
+
+		tracePEND_FUNC_CALL_FROM_ISR( xFunctionToPend, pvParameter1, ulParameter2, xReturn );
+
+		return xReturn;
+	}
+
+#endif /* INCLUDE_xTimerPendFunctionCall */
+/*-----------------------------------------------------------*/
+
+#if( INCLUDE_xTimerPendFunctionCall == 1 )
+
+	BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait )
+	{
+	DaemonTaskMessage_t xMessage;
+	BaseType_t xReturn;
+
+		/* This function can only be called after a timer has been created or
+		after the scheduler has been started because, until then, the timer
+		queue does not exist. */
+		configASSERT( xTimerQueue );
+
+		/* Complete the message with the function parameters and post it to the
+		daemon task. */
+		xMessage.xMessageID = tmrCOMMAND_EXECUTE_CALLBACK;
+		xMessage.u.xCallbackParameters.pxCallbackFunction = xFunctionToPend;
+		xMessage.u.xCallbackParameters.pvParameter1 = pvParameter1;
+		xMessage.u.xCallbackParameters.ulParameter2 = ulParameter2;
+
+		xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xTicksToWait );
+
+		tracePEND_FUNC_CALL( xFunctionToPend, pvParameter1, ulParameter2, xReturn );
+
+		return xReturn;
+	}
+
+#endif /* INCLUDE_xTimerPendFunctionCall */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxTimerGetTimerNumber( TimerHandle_t xTimer )
+	{
+		return ( ( Timer_t * ) xTimer )->uxTimerNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	void vTimerSetTimerNumber( TimerHandle_t xTimer, UBaseType_t uxTimerNumber )
+	{
+		( ( Timer_t * ) xTimer )->uxTimerNumber = uxTimerNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+/* This entire source file will be skipped if the application is not configured
+to include software timer functionality.  If you want to include software timer
+functionality then ensure configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */
+#endif /* configUSE_TIMERS == 1 */
+
+
+
diff --git a/USB-PD_Provider_1port/STM32CubeIDE/.cproject b/USB-PD_Provider_1port/STM32CubeIDE/.cproject
new file mode 100644
index 0000000..620de71
--- /dev/null
+++ b/USB-PD_Provider_1port/STM32CubeIDE/.cproject
@@ -0,0 +1,213 @@
+
+
+	
+		
+			
+				
+				
+					
+					
+					
+					
+					
+					
+				
+			
+			
+				
+					
+						
+							
+					
+				
+			
+			
+		
+		
+			
+				
+				
+					
+					
+					
+					
+					
+					
+				
+			
+			
+				
+					
+						
+							
+					
+				
+			
+			
+		
+	
+	
+		
+	
+	
+	
+		
+		
+			
+		
+		
+			
+		
+	
+	
+	
+
diff --git a/USB-PD_Provider_1port/STM32CubeIDE/.project b/USB-PD_Provider_1port/STM32CubeIDE/.project
new file mode 100644
index 0000000..9c1ba3b
--- /dev/null
+++ b/USB-PD_Provider_1port/STM32CubeIDE/.project
@@ -0,0 +1,361 @@
+
+
+	USB-PD_Provider_1port
+	
+	
+	
+	
+		
+			org.eclipse.cdt.managedbuilder.core.genmakebuilder
+			clean,full,incremental,
+			
+			
+		
+		
+			org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder
+			full,incremental,
+			
+			
+		
+	
+	
+		com.st.stm32cube.ide.mcu.MCUProjectNature
+		org.eclipse.cdt.core.cnature
+		com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature
+		com.st.stm32cube.ide.mcu.MCUNonUnderRootProjectNature
+		com.st.stm32cube.ide.mcu.MCUCubeProjectNature
+		com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature
+		com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature
+		com.st.stm32cube.ide.mcu.MCURootProjectNature
+		org.eclipse.cdt.managedbuilder.core.managedBuildNature
+		org.eclipse.cdt.managedbuilder.core.ScannerConfigNature
+		com.st.stm32cube.ide.mcu.MCUCubeImportedExampleProjectNature
+	
+	
+		
+			USB-PD_Provider_1port.ioc
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/USB-PD_Provider_1port.ioc
+		
+		
+			Doc/readme.txt
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/readme.txt
+		
+		
+			Utilities/bsp_gui.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Utilities/GUI_INTERFACE/bsp_gui.c
+		
+		
+			Utilities/data_struct_tlv.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Utilities/GUI_INTERFACE/data_struct_tlv.c
+		
+		
+			Utilities/gui_api.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Utilities/GUI_INTERFACE/gui_api.c
+		
+		
+			Utilities/tracer_emb.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Utilities/TRACER_EMB/tracer_emb.c
+		
+		
+			Utilities/tracer_emb_hw.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Utilities/TRACER_EMB/tracer_emb_hw.c
+		
+		
+			Application/User/app_freertos.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/app_freertos.c
+		
+		
+			Application/User/main.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/main.c
+		
+		
+			Application/User/stm32g0xx_hal_msp.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/stm32g0xx_hal_msp.c
+		
+		
+			Application/User/stm32g0xx_it.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/stm32g0xx_it.c
+		
+		
+			Application/User/usbpd.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/usbpd.c
+		
+		
+			Application/User/usbpd_dpm_core.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/usbpd_dpm_core.c
+		
+		
+			Application/User/usbpd_dpm_user.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/usbpd_dpm_user.c
+		
+		
+			Application/User/usbpd_pwr_if.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/usbpd_pwr_if.c
+		
+		
+			Application/User/usbpd_pwr_user.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/usbpd_pwr_user.c
+		
+		
+			Application/User/usbpd_vdm_user.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/usbpd_vdm_user.c
+		
+		
+			Drivers/CMSIS/system_stm32g0xx.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Src/system_stm32g0xx.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_adc.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_adc_ex.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_cortex.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_dma.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_dma_ex.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_exti.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_flash.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_flash_ex.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_gpio.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_lptim.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_lptim.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_pwr.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_pwr_ex.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_rcc.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_rcc_ex.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_tim.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_hal_tim_ex.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_adc.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_crs.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_crs.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_dma.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_exti.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_exti.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_gpio.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_gpio.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_lpuart.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_lpuart.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_rcc.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_tim.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_tim.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_ucpd.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_ucpd.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_usart.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usart.c
+		
+		
+			Drivers/STM32G0xx_HAL_Driver/stm32g0xx_ll_utils.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_utils.c
+		
+		
+			Middlewares/FreeRTOS/cmsis_os.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c
+		
+		
+			Middlewares/FreeRTOS/croutine.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/croutine.c
+		
+		
+			Middlewares/FreeRTOS/event_groups.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c
+		
+		
+			Middlewares/FreeRTOS/heap_4.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c
+		
+		
+			Middlewares/FreeRTOS/list.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/list.c
+		
+		
+			Middlewares/FreeRTOS/port.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c
+		
+		
+			Middlewares/FreeRTOS/queue.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/queue.c
+		
+		
+			Middlewares/FreeRTOS/stream_buffer.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c
+		
+		
+			Middlewares/FreeRTOS/tasks.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/tasks.c
+		
+		
+			Middlewares/FreeRTOS/timers.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/Third_Party/FreeRTOS/Source/timers.c
+		
+		
+			Middlewares/USBPD/usbpd_cad_hw_if.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_cad_hw_if.c
+		
+		
+			Middlewares/USBPD/usbpd_hw.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw.c
+		
+		
+			Middlewares/USBPD/usbpd_hw_if_it.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_hw_if_it.c
+		
+		
+			Middlewares/USBPD/usbpd_phy.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy.c
+		
+		
+			Middlewares/USBPD/usbpd_phy_hw_if.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_phy_hw_if.c
+		
+		
+			Middlewares/USBPD/usbpd_pwr_hw_if.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_pwr_hw_if.c
+		
+		
+			Middlewares/USBPD/usbpd_timersserver.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX/src/usbpd_timersserver.c
+		
+		
+			Middlewares/USBPD/usbpd_trace.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Middlewares/ST/STM32_USBPD_Library/Core/src/usbpd_trace.c
+		
+		
+			Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.c
+			1
+			$%7BPARENT-1-PROJECT_LOC%7D/Drivers/BSP/STM32G0C1E-EV/stm32g0c1e_eval_pwr.c
+		
+	
+
diff --git a/USB-PD_Provider_1port/STM32CubeIDE/.settings/language.settings.xml b/USB-PD_Provider_1port/STM32CubeIDE/.settings/language.settings.xml
new file mode 100644
index 0000000..38f0a44
--- /dev/null
+++ b/USB-PD_Provider_1port/STM32CubeIDE/.settings/language.settings.xml
@@ -0,0 +1,27 @@
+
+
+	
+		
+			
+			
+			
+			
+			
+				
+				
+			
+		
+	
+	
+		
+			
+			
+			
+			
+			
+				
+				
+			
+		
+	
+
diff --git a/USB-PD_Provider_1port/STM32CubeIDE/Application/Startup/startup_stm32g0c1vetx.s b/USB-PD_Provider_1port/STM32CubeIDE/Application/Startup/startup_stm32g0c1vetx.s
new file mode 100644
index 0000000..a956aae
--- /dev/null
+++ b/USB-PD_Provider_1port/STM32CubeIDE/Application/Startup/startup_stm32g0c1vetx.s
@@ -0,0 +1,302 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32g0c1xx.s
+  * @author    MCD Application Team
+  * @brief     STM32G0c1xx devices vector table GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0+ processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2020 STMicroelectronics. All rights reserved.
+  *
+  * This software component is licensed by ST under Apache License, Version 2.0,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/Apache-2.0
+  *
+  ******************************************************************************
+  */
+
+.syntax unified
+.cpu cortex-m0plus
+.fpu softvfp
+.thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Call the clock system initialization function.*/
+  bl  SystemInit
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application s entry point.*/
+  bl main
+
+LoopForever:
+  b LoopForever
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval None
+*/
+  .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word 0
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler                   /* Window WatchDog              */
+  .word PVD_VDDIO2_IRQHandler             /* PVD through EXTI Line detect */
+  .word RTC_TAMP_IRQHandler               /* RTC through the EXTI line    */
+  .word FLASH_IRQHandler                  /* FLASH                        */
+  .word RCC_CRS_IRQHandler                /* RCC & CRS                    */
+  .word EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word USB_UCPD1_2_IRQHandler            /* USB, UCPD1, UCPD2            */
+  .word DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler /* DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5, DMAMUX1 overrun */
+  .word ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
+  .word TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word TIM2_IRQHandler                   /* TIM2                         */
+  .word TIM3_TIM4_IRQHandler              /* TIM3, TIM4                   */
+  .word TIM6_DAC_LPTIM1_IRQHandler        /* TIM6, DAC and LPTIM1         */
+  .word TIM7_LPTIM2_IRQHandler            /* TIM7 and LPTIM2              */
+  .word TIM14_IRQHandler                  /* TIM14                        */
+  .word TIM15_IRQHandler                  /* TIM15                        */
+  .word TIM16_FDCAN_IT0_IRQHandler        /* TIM16 & FDCAN1_IT0 & FDCAN2_IT0 */
+  .word TIM17_FDCAN_IT1_IRQHandler        /* TIM17 & FDCAN1_IT1 & FDCAN2_IT1 */
+  .word I2C1_IRQHandler                   /* I2C1                         */
+  .word I2C2_3_IRQHandler                 /* I2C2, I2C3                   */
+  .word SPI1_IRQHandler                   /* SPI1                         */
+  .word SPI2_3_IRQHandler                 /* SPI2, SPI3                   */
+  .word USART1_IRQHandler                 /* USART1                       */
+  .word USART2_LPUART2_IRQHandler         /* USART2 & LPUART2             */
+  .word USART3_4_5_6_LPUART1_IRQHandler   /* USART3, USART4, USART5, USART6, LPUART1   */
+  .word CEC_IRQHandler                    /* CEC                          */
+  .word AES_RNG_IRQHandler                /* AES and RNG                  */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      PVD_VDDIO2_IRQHandler
+  .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+  .weak      RTC_TAMP_IRQHandler
+  .thumb_set RTC_TAMP_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_CRS_IRQHandler
+  .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      USB_UCPD1_2_IRQHandler
+  .thumb_set USB_UCPD1_2_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler
+  .thumb_set DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler,Default_Handler
+
+  .weak      ADC1_COMP_IRQHandler
+  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak      TIM3_TIM4_IRQHandler
+  .thumb_set TIM3_TIM4_IRQHandler,Default_Handler
+
+  .weak      TIM6_DAC_LPTIM1_IRQHandler
+  .thumb_set TIM6_DAC_LPTIM1_IRQHandler,Default_Handler
+
+  .weak      TIM7_LPTIM2_IRQHandler
+  .thumb_set TIM7_LPTIM2_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM15_IRQHandler
+  .thumb_set TIM15_IRQHandler,Default_Handler
+
+  .weak      TIM16_FDCAN_IT0_IRQHandler
+  .thumb_set TIM16_FDCAN_IT0_IRQHandler,Default_Handler
+
+  .weak      TIM17_FDCAN_IT1_IRQHandler
+  .thumb_set TIM17_FDCAN_IT1_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      I2C2_3_IRQHandler
+  .thumb_set I2C2_3_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      SPI2_3_IRQHandler
+  .thumb_set SPI2_3_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak      USART2_LPUART2_IRQHandler
+  .thumb_set USART2_LPUART2_IRQHandler,Default_Handler
+
+  .weak      USART3_4_5_6_LPUART1_IRQHandler
+  .thumb_set USART3_4_5_6_LPUART1_IRQHandler,Default_Handler
+
+  .weak      CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak      AES_RNG_IRQHandler
+  .thumb_set AES_RNG_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/USB-PD_Provider_1port/STM32CubeIDE/Application/User/syscalls.c b/USB-PD_Provider_1port/STM32CubeIDE/Application/User/syscalls.c
new file mode 100644
index 0000000..1d6ecc3
--- /dev/null
+++ b/USB-PD_Provider_1port/STM32CubeIDE/Application/User/syscalls.c
@@ -0,0 +1,159 @@
+/**
+ ******************************************************************************
+ * @file      syscalls.c
+ * @author    Auto-generated by STM32CubeIDE
+ * @brief     STM32CubeIDE Minimal System calls file
+ *
+ *            For more information about which c-functions
+ *            need which of these lowlevel functions
+ *            please consult the Newlib libc-manual
+ ******************************************************************************
+ * @attention
+ *
+ * 
© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.

+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+
+
+/* Variables */
+//#undef errno
+extern int errno;
+extern int __io_putchar(int ch) __attribute__((weak));
+extern int __io_getchar(void) __attribute__((weak));
+
+register char * stack_ptr asm("sp");
+
+char *__env[1] = { 0 };
+char **environ = __env;
+
+
+/* Functions */
+void initialise_monitor_handles()
+{
+}
+
+int _getpid(void)
+{
+	return 1;
+}
+
+int _kill(int pid, int sig)
+{
+	errno = EINVAL;
+	return -1;
+}
+
+void _exit (int status)
+{
+	_kill(status, -1);
+	while (1) {}		/* Make sure we hang here */
+}
+
+__attribute__((weak)) int _read(int file, char *ptr, int len)
+{
+	int DataIdx;
+
+	for (DataIdx = 0; DataIdx < len; DataIdx++)
+	{
+		*ptr++ = __io_getchar();
+	}
+
+return len;
+}
+
+__attribute__((weak)) int _write(int file, char *ptr, int len)
+{
+	int DataIdx;
+
+	for (DataIdx = 0; DataIdx < len; DataIdx++)
+	{
+		__io_putchar(*ptr++);
+	}
+	return len;
+}
+
+int _close(int file)
+{
+	return -1;
+}
+
+
+int _fstat(int file, struct stat *st)
+{
+	st->st_mode = S_IFCHR;
+	return 0;
+}
+
+int _isatty(int file)
+{
+	return 1;
+}
+
+int _lseek(int file, int ptr, int dir)
+{
+	return 0;
+}
+
+int _open(char *path, int flags, ...)
+{
+	/* Pretend like we always fail */
+	return -1;
+}
+
+int _wait(int *status)
+{
+	errno = ECHILD;
+	return -1;
+}
+
+int _unlink(char *name)
+{
+	errno = ENOENT;
+	return -1;
+}
+
+int _times(struct tms *buf)
+{
+	return -1;
+}
+
+int _stat(char *file, struct stat *st)
+{
+	st->st_mode = S_IFCHR;
+	return 0;
+}
+
+int _link(char *old, char *new)
+{
+	errno = EMLINK;
+	return -1;
+}
+
+int _fork(void)
+{
+	errno = EAGAIN;
+	return -1;
+}
+
+int _execve(char *name, char **argv, char **env)
+{
+	errno = ENOMEM;
+	return -1;
+}
diff --git a/USB-PD_Provider_1port/STM32CubeIDE/Application/User/sysmem.c b/USB-PD_Provider_1port/STM32CubeIDE/Application/User/sysmem.c
new file mode 100644
index 0000000..0823a1c
--- /dev/null
+++ b/USB-PD_Provider_1port/STM32CubeIDE/Application/User/sysmem.c
@@ -0,0 +1,80 @@
+/**
+ ******************************************************************************
+ * @file      sysmem.c
+ * @author    Generated by STM32CubeIDE
+ * @brief     STM32CubeIDE System Memory calls file
+ *
+ *            For more information about which C functions
+ *            need which of these lowlevel functions
+ *            please consult the newlib libc manual
+ ******************************************************************************
+ * @attention
+ *
+ * 
© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.

+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include 
+#include 
+
+/**
+ * Pointer to the current high watermark of the heap usage
+ */
+static uint8_t *__sbrk_heap_end = NULL;
+
+/**
+ * @brief _sbrk() allocates memory to the newlib heap and is used by malloc
+ *        and others from the C library
+ *
+ * @verbatim
+ * ############################################################################
+ * #  .data  #  .bss  #       newlib heap       #          MSP stack          #
+ * #         #        #                         # Reserved by _Min_Stack_Size #
+ * ############################################################################
+ * ^-- RAM start      ^-- _end                             _estack, RAM end --^
+ * @endverbatim
+ *
+ * This implementation starts allocating at the '_end' linker symbol
+ * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
+ * The implementation considers '_estack' linker symbol to be RAM end
+ * NOTE: If the MSP stack, at any point during execution, grows larger than the
+ * reserved size, please increase the '_Min_Stack_Size'.
+ *
+ * @param incr Memory size
+ * @return Pointer to allocated memory
+ */
+void *_sbrk(ptrdiff_t incr)
+{
+  extern uint8_t _end; /* Symbol defined in the linker script */
+  extern uint8_t _estack; /* Symbol defined in the linker script */
+  extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
+  const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
+  const uint8_t *max_heap = (uint8_t *)stack_limit;
+  uint8_t *prev_heap_end;
+
+  /* Initialize heap end at first call */
+  if (NULL == __sbrk_heap_end)
+  {
+    __sbrk_heap_end = &_end;
+  }
+
+  /* Protect heap from growing into the reserved MSP stack */
+  if (__sbrk_heap_end + incr > max_heap)
+  {
+    errno = ENOMEM;
+    return (void *)-1;
+  }
+
+  prev_heap_end = __sbrk_heap_end;
+  __sbrk_heap_end += incr;
+
+  return (void *)prev_heap_end;
+}
diff --git a/USB-PD_Provider_1port/STM32CubeIDE/STM32G0C1VETX_FLASH.ld b/USB-PD_Provider_1port/STM32CubeIDE/STM32G0C1VETX_FLASH.ld
new file mode 100644
index 0000000..fe04021
--- /dev/null
+++ b/USB-PD_Provider_1port/STM32CubeIDE/STM32G0C1VETX_FLASH.ld
@@ -0,0 +1,175 @@
+/**
+ ******************************************************************************
+ * @file      LinkerScript.ld
+ * @author    Auto-generated by STM32CubeIDE
+ * @brief     Linker script for STM32G0C1VETx Device from STM32G0 series
+ *                      512Kbytes FLASH
+ *                      144Kbytes RAM
+ *
+ *            Set heap size, stack size and stack location according
+ *            to application requirements.
+ *
+ *            Set memory bank area and size if external memory is used
+ ******************************************************************************
+ * @attention
+ *
+ * 
© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.

+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM);	/* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0xc00;	/* required amount of heap  */
+_Min_Stack_Size = 0x400;	/* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+  RAM    (xrw)    : ORIGIN = 0x20000000,   LENGTH = 144K
+  FLASH    (rx)    : ORIGIN = 0x8000000,   LENGTH = 512K
+}
+
+/* Sections */
+SECTIONS
+{
+  /* The startup code into "FLASH" Rom type memory */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data into "FLASH" Rom type memory */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data into "FLASH" Rom type memory */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { 
+    . = ALIGN(4);
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+    . = ALIGN(4);
+  } >FLASH
+  
+  .ARM : {
+    . = ALIGN(4);
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+    . = ALIGN(4);
+  } >FLASH
+
+  .preinit_array     :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+  
+  .init_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+  
+  .fini_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  /* Used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections into "RAM" Ram type memory */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+    
+  } >RAM AT> FLASH
+
+  /* Uninitialized data section into "RAM" Ram type memory */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough "RAM" Ram  type memory left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  /* Remove information from the compiler libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/USB-PD_Provider_1port/Src/app_freertos.c b/USB-PD_Provider_1port/Src/app_freertos.c
new file mode 100644
index 0000000..05d0479
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/app_freertos.c
@@ -0,0 +1,61 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : app_freertos.c
+  * Description        : Code for freertos applications
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "FreeRTOS.h"
+#include "task.h"
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN Variables */
+
+/* USER CODE END Variables */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN FunctionPrototypes */
+
+/* USER CODE END FunctionPrototypes */
+
+/* Private application code --------------------------------------------------*/
+/* USER CODE BEGIN Application */
+
+/* USER CODE END Application */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/main.c b/USB-PD_Provider_1port/Src/main.c
new file mode 100644
index 0000000..61dc213
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/main.c
@@ -0,0 +1,622 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "cmsis_os.h"
+#include "usbpd.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+ADC_HandleTypeDef hadc1;
+DMA_HandleTypeDef hdma_adc1;
+
+LPTIM_HandleTypeDef hlptim1;
+
+osThreadId defaultTaskHandle;
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+void StartDefaultTask(void const * argument);
+
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+
+  /* USBPD initialisation ---------------------------------*/
+  MX_USBPD_Init();
+
+  /* USER CODE BEGIN RTOS_MUTEX */
+  /* add mutexes, ... */
+  /* USER CODE END RTOS_MUTEX */
+
+  /* USER CODE BEGIN RTOS_SEMAPHORES */
+  /* add semaphores, ... */
+  /* USER CODE END RTOS_SEMAPHORES */
+
+  /* USER CODE BEGIN RTOS_TIMERS */
+  /* start timers, add new ones, ... */
+  /* USER CODE END RTOS_TIMERS */
+
+  /* USER CODE BEGIN RTOS_QUEUES */
+  /* add queues, ... */
+  /* USER CODE END RTOS_QUEUES */
+
+  /* Create the thread(s) */
+  /* definition and creation of defaultTask */
+  osThreadDef(defaultTask, StartDefaultTask, osPriorityNormal, 0, 128);
+  defaultTaskHandle = osThreadCreate(osThread(defaultTask), NULL);
+
+  /* USER CODE BEGIN RTOS_THREADS */
+  /* add threads, ... */
+  /* USER CODE END RTOS_THREADS */
+
+  /* Start scheduler */
+  osKernelStart();
+
+  /* We should never get here as control is now taken by the scheduler */
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
+  while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2)
+  {
+  }
+
+  /* HSI configuration and activation */
+  LL_RCC_HSI_Enable();
+  while(LL_RCC_HSI_IsReady() != 1)
+  {
+  }
+
+  /* Main PLL configuration and activation */
+  LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, LL_RCC_PLLM_DIV_1, 8, LL_RCC_PLLR_DIV_2);
+  LL_RCC_PLL_Enable();
+  LL_RCC_PLL_EnableDomain_SYS();
+  while(LL_RCC_PLL_IsReady() != 1)
+  {
+  }
+
+  /* Set AHB prescaler*/
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+
+  /* Sysclk activation on the main PLL */
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+  {
+  }
+
+  /* Set APB1 prescaler*/
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+
+   /* Update the time base */
+  if (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
+  LL_SetSystemCoreClock(64000000);
+  LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK1);
+  LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE_PCLK1);
+  LL_RCC_SetADCClockSource(LL_RCC_ADC_CLKSOURCE_SYSCLK);
+}
+
+/**
+  * @brief ADC1 Initialization Function
+  * @param None
+  * @retval None
+  */
+void MX_ADC1_Init(void)
+{
+
+  /* USER CODE BEGIN ADC1_Init 0 */
+
+  /* USER CODE END ADC1_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC1_Init 1 */
+
+  /* USER CODE END ADC1_Init 1 */
+  /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
+  */
+  hadc1.Instance = ADC1;
+  hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
+  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
+  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
+  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  hadc1.Init.LowPowerAutoWait = DISABLE;
+  hadc1.Init.LowPowerAutoPowerOff = DISABLE;
+  hadc1.Init.ContinuousConvMode = DISABLE;
+  hadc1.Init.NbrOfConversion = 1;
+  hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+  hadc1.Init.DMAContinuousRequests = DISABLE;
+  hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+  hadc1.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_1CYCLE_5;
+  hadc1.Init.SamplingTimeCommon2 = ADC_SAMPLETIME_1CYCLE_5;
+  hadc1.Init.OversamplingMode = DISABLE;
+  hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH;
+  if (HAL_ADC_Init(&hadc1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_11;
+  sConfig.Rank = ADC_REGULAR_RANK_1;
+  sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC1_Init 2 */
+
+  /* USER CODE END ADC1_Init 2 */
+
+}
+
+/**
+  * @brief LPTIM1 Initialization Function
+  * @param None
+  * @retval None
+  */
+void MX_LPTIM1_Init(void)
+{
+
+  /* USER CODE BEGIN LPTIM1_Init 0 */
+
+  /* USER CODE END LPTIM1_Init 0 */
+
+  /* USER CODE BEGIN LPTIM1_Init 1 */
+
+  /* USER CODE END LPTIM1_Init 1 */
+  hlptim1.Instance = LPTIM1;
+  hlptim1.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+  hlptim1.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+  hlptim1.Init.UltraLowPowerClock.Polarity = LPTIM_CLOCKPOLARITY_RISING;
+  hlptim1.Init.UltraLowPowerClock.SampleTime = LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION;
+  hlptim1.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+  hlptim1.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+  hlptim1.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+  hlptim1.Init.CounterSource = LPTIM_COUNTERSOURCE_EXTERNAL;
+  hlptim1.Init.Input1Source = LPTIM_INPUT1SOURCE_COMP1;
+  hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
+  if (HAL_LPTIM_Init(&hlptim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN LPTIM1_Init 2 */
+
+  /* USER CODE END LPTIM1_Init 2 */
+
+}
+
+/**
+  * @brief UCPD1 Initialization Function
+  * @param None
+  * @retval None
+  */
+void MX_UCPD1_Init(void)
+{
+
+  /* USER CODE BEGIN UCPD1_Init 0 */
+
+  /* USER CODE END UCPD1_Init 0 */
+
+  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* Peripheral clock enable */
+  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_UCPD1);
+
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB);
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOA);
+  /**UCPD1 GPIO Configuration
+  PB15   ------> UCPD1_CC2
+  PA8   ------> UCPD1_CC1
+  */
+  GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  GPIO_InitStruct.Pin = LL_GPIO_PIN_8;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* UCPD1 DMA Init */
+
+  /* UCPD1_RX Init */
+  LL_DMA_SetPeriphRequest(DMA1, LL_DMA_CHANNEL_4, LL_DMAMUX_REQ_UCPD1_RX);
+
+  LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_4, LL_DMA_DIRECTION_PERIPH_TO_MEMORY);
+
+  LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PRIORITY_LOW);
+
+  LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MODE_NORMAL);
+
+  LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PERIPH_NOINCREMENT);
+
+  LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MEMORY_INCREMENT);
+
+  LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PDATAALIGN_BYTE);
+
+  LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MDATAALIGN_BYTE);
+
+  /* UCPD1_TX Init */
+  LL_DMA_SetPeriphRequest(DMA1, LL_DMA_CHANNEL_2, LL_DMAMUX_REQ_UCPD1_TX);
+
+  LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_2, LL_DMA_DIRECTION_MEMORY_TO_PERIPH);
+
+  LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_2, LL_DMA_PRIORITY_LOW);
+
+  LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_2, LL_DMA_MODE_NORMAL);
+
+  LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_2, LL_DMA_PERIPH_NOINCREMENT);
+
+  LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_2, LL_DMA_MEMORY_INCREMENT);
+
+  LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_2, LL_DMA_PDATAALIGN_BYTE);
+
+  LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_2, LL_DMA_MDATAALIGN_BYTE);
+
+  /* UCPD1 interrupt Init */
+  NVIC_SetPriority(USB_UCPD1_2_IRQn, 3);
+  NVIC_EnableIRQ(USB_UCPD1_2_IRQn);
+
+  /* USER CODE BEGIN UCPD1_Init 1 */
+
+  /* USER CODE END UCPD1_Init 1 */
+  /* USER CODE BEGIN UCPD1_Init 2 */
+
+  /* USER CODE END UCPD1_Init 2 */
+
+}
+
+/**
+  * @brief USART3 Initialization Function
+  * @param None
+  * @retval None
+  */
+void MX_USART3_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART3_Init 0 */
+
+  /* USER CODE END USART3_Init 0 */
+
+  LL_USART_InitTypeDef USART_InitStruct = {0};
+
+  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* Peripheral clock enable */
+  LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3);
+
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOC);
+  /**USART3 GPIO Configuration
+  PC10   ------> USART3_TX
+  PC11   ------> USART3_RX
+  */
+  GPIO_InitStruct.Pin = LL_GPIO_PIN_10;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  GPIO_InitStruct.Alternate = LL_GPIO_AF_0;
+  LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  GPIO_InitStruct.Pin = LL_GPIO_PIN_11;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  GPIO_InitStruct.Alternate = LL_GPIO_AF_0;
+  LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /* USART3 DMA Init */
+
+  /* USART3_TX Init */
+  LL_DMA_SetPeriphRequest(DMA1, LL_DMA_CHANNEL_7, LL_DMAMUX_REQ_USART3_TX);
+
+  LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_7, LL_DMA_DIRECTION_MEMORY_TO_PERIPH);
+
+  LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_7, LL_DMA_PRIORITY_LOW);
+
+  LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_7, LL_DMA_MODE_NORMAL);
+
+  LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_7, LL_DMA_PERIPH_NOINCREMENT);
+
+  LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_7, LL_DMA_MEMORY_INCREMENT);
+
+  LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_7, LL_DMA_PDATAALIGN_BYTE);
+
+  LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_7, LL_DMA_MDATAALIGN_BYTE);
+
+  /* USART3 interrupt Init */
+  NVIC_SetPriority(USART3_4_5_6_LPUART1_IRQn, 3);
+  NVIC_EnableIRQ(USART3_4_5_6_LPUART1_IRQn);
+
+  /* USER CODE BEGIN USART3_Init 1 */
+
+  /* USER CODE END USART3_Init 1 */
+  USART_InitStruct.PrescalerValue = LL_USART_PRESCALER_DIV1;
+  USART_InitStruct.BaudRate = 921600;
+  USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B;
+  USART_InitStruct.StopBits = LL_USART_STOPBITS_1;
+  USART_InitStruct.Parity = LL_USART_PARITY_NONE;
+  USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
+  USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+  USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16;
+  LL_USART_Init(USART3, &USART_InitStruct);
+  LL_USART_SetTXFIFOThreshold(USART3, LL_USART_FIFOTHRESHOLD_1_8);
+  LL_USART_SetRXFIFOThreshold(USART3, LL_USART_FIFOTHRESHOLD_1_8);
+  LL_USART_DisableFIFO(USART3);
+  LL_USART_ConfigAsyncMode(USART3);
+
+  /* USER CODE BEGIN WKUPType USART3 */
+
+  /* USER CODE END WKUPType USART3 */
+
+  LL_USART_Enable(USART3);
+
+  /* Polling USART3 initialisation */
+  while((!(LL_USART_IsActiveFlag_TEACK(USART3))) || (!(LL_USART_IsActiveFlag_REACK(USART3))))
+  {
+  }
+  /* USER CODE BEGIN USART3_Init 2 */
+
+  /* USER CODE END USART3_Init 2 */
+
+}
+
+/**
+  * Enable DMA controller clock
+  */
+void MX_DMA_Init(void)
+{
+
+  /* Init with LL driver */
+  /* DMA controller clock enable */
+  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1);
+
+  /* DMA interrupt init */
+  /* DMA1_Channel1_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 3, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+  /* DMA1_Channel2_3_IRQn interrupt configuration */
+  NVIC_SetPriority(DMA1_Channel2_3_IRQn, 3);
+  NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);
+  /* DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn interrupt configuration */
+  NVIC_SetPriority(DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn, 3);
+  NVIC_EnableIRQ(DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn);
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+void MX_GPIO_Init(void)
+{
+  LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB);
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOC);
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOA);
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOD);
+
+  /**/
+  LL_GPIO_ResetOutputPin(VCONN_EN2_GPIO_Port, VCONN_EN2_Pin);
+
+  /**/
+  LL_GPIO_ResetOutputPin(VCONN_DISCHARGE2_GPIO_Port, VCONN_DISCHARGE2_Pin);
+
+  /**/
+  LL_GPIO_ResetOutputPin(VBUS_DISCHARGE1_GPIO_Port, VBUS_DISCHARGE1_Pin);
+
+  /**/
+  LL_GPIO_ResetOutputPin(VBUS_DISCHARGE2_GPIO_Port, VBUS_DISCHARGE2_Pin);
+
+  /**/
+  LL_GPIO_ResetOutputPin(SOURCE_EN_GPIO_Port, SOURCE_EN_Pin);
+
+  /**/
+  LL_GPIO_ResetOutputPin(VCONN_EN1_GPIO_Port, VCONN_EN1_Pin);
+
+  /**/
+  GPIO_InitStruct.Pin = VCONN_EN2_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(VCONN_EN2_GPIO_Port, &GPIO_InitStruct);
+
+  /**/
+  GPIO_InitStruct.Pin = VCONN_DISCHARGE2_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(VCONN_DISCHARGE2_GPIO_Port, &GPIO_InitStruct);
+
+  /**/
+  GPIO_InitStruct.Pin = VBUS_DISCHARGE1_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(VBUS_DISCHARGE1_GPIO_Port, &GPIO_InitStruct);
+
+  /**/
+  GPIO_InitStruct.Pin = VBUS_DISCHARGE2_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(VBUS_DISCHARGE2_GPIO_Port, &GPIO_InitStruct);
+
+  /**/
+  GPIO_InitStruct.Pin = SOURCE_EN_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(SOURCE_EN_GPIO_Port, &GPIO_InitStruct);
+
+  /**/
+  GPIO_InitStruct.Pin = VCONN_EN1_Pin;
+  GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+  GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+  GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+  LL_GPIO_Init(VCONN_EN1_GPIO_Port, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/* USER CODE BEGIN Header_StartDefaultTask */
+/**
+  * @brief  Function implementing the defaultTask thread.
+  * @param  argument: Not used
+  * @retval None
+  */
+/* USER CODE END Header_StartDefaultTask */
+void StartDefaultTask(void const * argument)
+{
+  /* USER CODE BEGIN 5 */
+  /* Infinite loop */
+  for(;;)
+  {
+    osDelay(1);
+  }
+  /* USER CODE END 5 */
+}
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+  __disable_irq();
+  while (1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/stm32g0xx_hal_msp.c b/USB-PD_Provider_1port/Src/stm32g0xx_hal_msp.c
new file mode 100644
index 0000000..335fd24
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/stm32g0xx_hal_msp.c
@@ -0,0 +1,255 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32g0xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+extern DMA_HandleTypeDef hdma_adc1;
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+  /* PendSV_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(PendSV_IRQn, 3, 0);
+
+  /** Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral
+  */
+  HAL_SYSCFG_StrobeDBattpinsConfig(SYSCFG_CFGR1_UCPD2_STROBE);
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief ADC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hadc->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspInit 0 */
+
+  /* USER CODE END ADC1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_ADC_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**ADC1 GPIO Configuration
+    PA3     ------> ADC1_IN3
+    PB10     ------> ADC1_IN11
+    PB11     ------> ADC1_IN15
+    PB12     ------> ADC1_IN16
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    /* ADC1 DMA Init */
+    /* ADC1 Init */
+    hdma_adc1.Instance = DMA1_Channel1;
+    hdma_adc1.Init.Request = DMA_REQUEST_ADC1;
+    hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
+    hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
+    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+    hdma_adc1.Init.Mode = DMA_NORMAL;
+    hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
+    if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(hadc,DMA_Handle,hdma_adc1);
+
+    /* ADC1 interrupt Init */
+    HAL_NVIC_SetPriority(ADC1_COMP_IRQn, 3, 0);
+    HAL_NVIC_EnableIRQ(ADC1_COMP_IRQn);
+  /* USER CODE BEGIN ADC1_MspInit 1 */
+
+  /* USER CODE END ADC1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief ADC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+  if(hadc->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspDeInit 0 */
+
+  /* USER CODE END ADC1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_ADC_CLK_DISABLE();
+
+    /**ADC1 GPIO Configuration
+    PA3     ------> ADC1_IN3
+    PB10     ------> ADC1_IN11
+    PB11     ------> ADC1_IN15
+    PB12     ------> ADC1_IN16
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_3);
+
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
+
+    /* ADC1 DMA DeInit */
+    HAL_DMA_DeInit(hadc->DMA_Handle);
+
+    /* ADC1 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(ADC1_COMP_IRQn);
+  /* USER CODE BEGIN ADC1_MspDeInit 1 */
+
+  /* USER CODE END ADC1_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief LPTIM MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hlptim->Instance==LPTIM1)
+  {
+  /* USER CODE BEGIN LPTIM1_MspInit 0 */
+
+  /* USER CODE END LPTIM1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_LPTIM1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    /**LPTIM1 GPIO Configuration
+    PC2     ------> LPTIM1_IN2
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF0_LPTIM1;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN LPTIM1_MspInit 1 */
+
+  /* USER CODE END LPTIM1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief LPTIM MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef* hlptim)
+{
+  if(hlptim->Instance==LPTIM1)
+  {
+  /* USER CODE BEGIN LPTIM1_MspDeInit 0 */
+
+  /* USER CODE END LPTIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPTIM1_CLK_DISABLE();
+
+    /**LPTIM1 GPIO Configuration
+    PC2     ------> LPTIM1_IN2
+    */
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2);
+
+  /* USER CODE BEGIN LPTIM1_MspDeInit 1 */
+
+  /* USER CODE END LPTIM1_MspDeInit 1 */
+  }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/stm32g0xx_it.c b/USB-PD_Provider_1port/Src/stm32g0xx_it.c
new file mode 100644
index 0000000..ecb8bee
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/stm32g0xx_it.c
@@ -0,0 +1,222 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32g0xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32g0xx_it.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "usbpd.h"
+#include "tracer_emb.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_adc1;
+extern ADC_HandleTypeDef hadc1;
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M0+ Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+#if (INCLUDE_xTaskGetSchedulerState == 1 )
+  if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED)
+  {
+#endif /* INCLUDE_xTaskGetSchedulerState */
+  xPortSysTickHandler();
+#if (INCLUDE_xTaskGetSchedulerState == 1 )
+  }
+#endif /* INCLUDE_xTaskGetSchedulerState */
+  USBPD_DPM_TimerCounter();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+#if defined(_GUI_INTERFACE)
+  GUI_TimerCounter();
+#endif /* _GUI_INTERFACE */
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32G0xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32g0xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles USB, UCPD1 and UCPD2 global interrupts.
+  */
+void USB_UCPD1_2_IRQHandler(void)
+{
+  /* USER CODE BEGIN USB_UCPD1_2_IRQn 0 */
+
+  /* USER CODE END USB_UCPD1_2_IRQn 0 */
+  USBPD_PORT0_IRQHandler();
+
+  /* USER CODE BEGIN USB_UCPD1_2_IRQn 1 */
+
+  /* USER CODE END USB_UCPD1_2_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 channel 1 interrupt.
+  */
+void DMA1_Channel1_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
+
+  /* USER CODE END DMA1_Channel1_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_adc1);
+  /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 channel 2 and channel 3 interrupts.
+  */
+void DMA1_Channel2_3_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel2_3_IRQn 0 */
+
+  /* USER CODE END DMA1_Channel2_3_IRQn 0 */
+
+  /* USER CODE BEGIN DMA1_Channel2_3_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel2_3_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5 and DMAMUX1 Overrun Interrupts.
+  */
+void DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn 0 */
+
+  /* USER CODE END DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn 0 */
+
+  TRACER_EMB_IRQHandlerDMA();
+  /* USER CODE BEGIN DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn 1 */
+
+  /* USER CODE END DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn 1 */
+}
+
+/**
+  * @brief This function handles ADC1, COMP1,COMP2, COMP3 Interrupts (combined with EXTI 17 & 18).
+  */
+void ADC1_COMP_IRQHandler(void)
+{
+  /* USER CODE BEGIN ADC1_COMP_IRQn 0 */
+
+  /* USER CODE END ADC1_COMP_IRQn 0 */
+  HAL_ADC_IRQHandler(&hadc1);
+  /* USER CODE BEGIN ADC1_COMP_IRQn 1 */
+
+  /* USER CODE END ADC1_COMP_IRQn 1 */
+}
+
+/**
+  * @brief This function handles USART3, USART4, USART5, USART6, LPUART1 globlal Interrupts (combined with EXTI 28).
+  */
+void USART3_4_5_6_LPUART1_IRQHandler(void)
+{
+  /* USER CODE BEGIN USART3_4_5_6_LPUART1_IRQn 0 */
+
+  /* USER CODE END USART3_4_5_6_LPUART1_IRQn 0 */
+
+  TRACER_EMB_IRQHandlerUSART();
+  /* USER CODE BEGIN USART3_4_5_6_LPUART1_IRQn 1 */
+
+  /* USER CODE END USART3_4_5_6_LPUART1_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/system_stm32g0xx.c b/USB-PD_Provider_1port/Src/system_stm32g0xx.c
new file mode 100644
index 0000000..95dd026
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/system_stm32g0xx.c
@@ -0,0 +1,290 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32g0xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32g0xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *   After each device reset the HSI (8 MHz then 16 MHz) is used as system clock source.
+  *   Then SystemInit() function is called, in "startup_stm32g0xx.s" file, to
+  *   configure the system clock before to branch to main program.
+  *
+  *   This file configures the system clock as follows:
+  *=============================================================================
+  *-----------------------------------------------------------------------------
+  *        System Clock source                    | HSI
+  *-----------------------------------------------------------------------------
+  *        SYSCLK(Hz)                             | 16000000
+  *-----------------------------------------------------------------------------
+  *        HCLK(Hz)                               | 16000000
+  *-----------------------------------------------------------------------------
+  *        AHB Prescaler                          | 1
+  *-----------------------------------------------------------------------------
+  *        APB Prescaler                          | 1
+  *-----------------------------------------------------------------------------
+  *        HSI Division factor                    | 1
+  *-----------------------------------------------------------------------------
+  *        PLL_M                                  | 1
+  *-----------------------------------------------------------------------------
+  *        PLL_N                                  | 8
+  *-----------------------------------------------------------------------------
+  *        PLL_P                                  | 7
+  *-----------------------------------------------------------------------------
+  *        PLL_Q                                  | 2
+  *-----------------------------------------------------------------------------
+  *        PLL_R                                  | 2
+  *-----------------------------------------------------------------------------
+  *        Require 48MHz for RNG                  | Disabled
+  *-----------------------------------------------------------------------------
+  *=============================================================================
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Apache License, Version 2.0,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/Apache-2.0
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32g0xx_system
+  * @{
+  */
+
+/** @addtogroup STM32G0xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32g0xx.h"
+
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    (8000000UL)    /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE  (16000000UL)   /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE   (32000UL)     /*!< Value of LSI in Hz*/
+#endif /* LSI_VALUE */
+
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE  (32768UL)      /*!< Value of LSE in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32G0xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32G0xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0U /*!< Vector Table base offset field.
+                                   This value must be a multiple of 0x100. */
+/******************************************************************************/
+/**
+  * @}
+  */
+
+/** @addtogroup STM32G0xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32G0xx_System_Private_Variables
+  * @{
+  */
+  /* The SystemCoreClock variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = 16000000UL;
+
+  const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL};
+  const uint32_t APBPrescTable[8UL] =  {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32G0xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32G0xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
+  *
+  *           - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE
+  *
+  *           - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (**) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
+  *              16 MHz) but the real value may vary depending on the variations
+  *              in voltage and temperature.
+  *
+  *         (***) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
+  *              8 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp;
+  uint32_t pllvco;
+  uint32_t pllr;
+  uint32_t pllsource;
+  uint32_t pllm;
+  uint32_t hsidiv;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+    case RCC_CFGR_SWS_0:                /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+
+    case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0):  /* LSI used as system clock */
+      SystemCoreClock = LSI_VALUE;
+      break;
+
+    case RCC_CFGR_SWS_2:                /* LSE used as system clock */
+      SystemCoreClock = LSE_VALUE;
+      break;
+
+    case RCC_CFGR_SWS_1:  /* PLL used as system clock */
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+         SYSCLK = PLL_VCO / PLLR
+         */
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+      pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL;
+
+      if(pllsource == 0x03UL)           /* HSE used as PLL clock source */
+      {
+        pllvco = (HSE_VALUE / pllm);
+      }
+      else                              /* HSI used as PLL clock source */
+      {
+          pllvco = (HSI_VALUE / pllm);
+      }
+      pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
+      pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);
+
+      SystemCoreClock = pllvco/pllr;
+      break;
+      
+    case 0x00000000U:                   /* HSI used as system clock */
+    default:                            /* HSI used as system clock */
+      hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos));
+      SystemCoreClock = (HSI_VALUE/hsidiv);
+      break;
+  }
+  /* Compute HCLK clock frequency --------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/usbpd.c b/USB-PD_Provider_1port/Src/usbpd.c
new file mode 100644
index 0000000..953c667
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/usbpd.c
@@ -0,0 +1,107 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usbpd.c
+  * @author  MCD Application Team
+  * @brief   This file contains the device define.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbpd.h"
+#include "gui_api.h"
+
+/* USER CODE BEGIN 0 */
+/* USER CODE END 0 */
+
+/* USER CODE BEGIN 1 */
+/* USER CODE END 1 */
+
+/* Private variables ---------------------------------------------------------*/
+const uint8_t HWBoardVersionName[] = "STM32G0C1E-EV";
+const uint8_t PDTypeName[] = "MB1581B";
+
+/* Private functions ---------------------------------------------------------*/
+static const uint8_t*          GetHWBoardVersionName(void);
+static const uint8_t*          GetPDTypeName(void);
+
+/* USER CODE BEGIN 2 */
+/* USER CODE END 2 */
+
+/* USBPD init function */
+void MX_USBPD_Init(void)
+{
+
+  /* Global Init of USBPD HW */
+  USBPD_HW_IF_GlobalHwInit();
+
+  /* Initialize the Device Policy Manager */
+  if (USBPD_OK != USBPD_DPM_InitCore())
+  {
+    while(1);
+  }
+
+  /* Initialize GUI before retrieving PDO from RAM */
+  GUI_Init(GetHWBoardVersionName, GetPDTypeName, HW_IF_PWR_GetVoltage, HW_IF_PWR_GetCurrent);
+
+  /* Initialise the DPM application */
+  if (USBPD_OK != USBPD_DPM_UserInit())
+  {
+    while(1);
+  }
+
+  /* USER CODE BEGIN 3 */
+  /* USER CODE END 3 */
+
+  if (USBPD_OK != USBPD_DPM_InitOS())
+  {
+    while(1);
+  }
+
+  /* USER CODE BEGIN EnableIRQ */
+  /* Enable IRQ which has been disabled by FreeRTOS services */
+  __enable_irq();
+  /* USER CODE END EnableIRQ */
+
+}
+/**
+  * @brief  This method returns HW board version name
+  * @retval HW Board version name
+  */
+static const uint8_t* GetHWBoardVersionName(void)
+{
+  return HWBoardVersionName;
+}
+
+/**
+  * @brief  This method returns HW PD Type name
+  * @retval HW Board version name
+  */
+static const uint8_t* GetPDTypeName(void)
+{
+  return PDTypeName;
+}
+
+/* USER CODE BEGIN 4 */
+/* USER CODE END 4 */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/usbpd_dpm_core.c b/USB-PD_Provider_1port/Src/usbpd_dpm_core.c
new file mode 100644
index 0000000..c69386c
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/usbpd_dpm_core.c
@@ -0,0 +1,496 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usbpd_dpm_core.c
+  * @author  MCD Application Team
+  * @brief   USBPD dpm core file
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#define __USBPD_DPM_CORE_C
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbpd_core.h"
+#include "usbpd_trace.h"
+#include "usbpd_dpm_core.h"
+#include "usbpd_dpm_user.h"
+#include "usbpd_dpm_conf.h"
+
+#include "cmsis_os.h"
+#if (osCMSIS >= 0x20000U)
+#include "task.h"
+#endif /* osCMSIS >= 0x20000U */
+
+/* Generic STM32 prototypes */
+extern uint32_t HAL_GetTick(void);
+
+/* Private function prototypes -----------------------------------------------*/
+#if (osCMSIS < 0x20000U)
+void USBPD_PE_Task(void const *argument);
+void USBPD_CAD_Task(void const *argument);
+
+#else /* osCMSIS >= 0x20000U */
+
+void USBPD_PE_Task_P0(void *argument);
+void USBPD_PE_Task_P1(void *argument);
+static void PE_Task(uint32_t PortNum);
+void USBPD_CAD_Task(void *argument);
+#endif /* osCMSIS < 0x20000U */
+
+/* Private typedef -----------------------------------------------------------*/
+#if (osCMSIS < 0x20000U)
+#define DPM_STACK_SIZE_ADDON_FOR_CMSIS              1
+#else
+#define DPM_STACK_SIZE_ADDON_FOR_CMSIS              4
+#endif /* osCMSIS < 0x20000U */
+#define FREERTOS_PE_PRIORITY                    osPriorityAboveNormal
+#define FREERTOS_PE_STACK_SIZE                  (200 * DPM_STACK_SIZE_ADDON_FOR_CMSIS)
+#define FREERTOS_CAD_PRIORITY                   osPriorityRealtime
+#define FREERTOS_CAD_STACK_SIZE                 (300 * DPM_STACK_SIZE_ADDON_FOR_CMSIS)
+
+#if (osCMSIS < 0x20000U)
+osThreadDef(PE_0, USBPD_PE_Task, FREERTOS_PE_PRIORITY, 0, FREERTOS_PE_STACK_SIZE);
+osThreadDef(PE_1, USBPD_PE_Task, FREERTOS_PE_PRIORITY, 0, FREERTOS_PE_STACK_SIZE);
+osMessageQDef(queuePE, 1, uint16_t);
+osThreadDef(CAD, USBPD_CAD_Task, FREERTOS_CAD_PRIORITY, 0, FREERTOS_CAD_STACK_SIZE);
+osMessageQDef(queueCAD, 2, uint16_t);
+
+#else /* osCMSIS >= 0x20000U */
+
+osThreadAttr_t PE0_Thread_Atrr = {
+  .name       = "PE_0",
+  .priority   = FREERTOS_PE_PRIORITY, /*osPriorityAboveNormal,*/
+  .stack_size = FREERTOS_PE_STACK_SIZE
+};
+osThreadAttr_t PE1_Thread_Atrr = {
+  .name       = "PE_1",
+  .priority   = FREERTOS_PE_PRIORITY,
+  .stack_size = FREERTOS_PE_STACK_SIZE
+};
+
+osThreadAttr_t CAD_Thread_Atrr = {
+  .name       = "CAD",
+  .priority   = FREERTOS_CAD_PRIORITY, /*osPriorityRealtime,*/
+  .stack_size = FREERTOS_CAD_STACK_SIZE
+};
+
+#endif /* osCMSIS < 0x20000U */
+
+/* Private define ------------------------------------------------------------*/
+#if (osCMSIS < 0x20000U)
+#define OSTHREAD_PE(__PORT__)       (((__PORT__) == USBPD_PORT_0) ? osThread(PE_0) : osThread(PE_1))
+#else
+#define OSTHREAD_PE(__PORT__)       (((__PORT__) == USBPD_PORT_0) ? USBPD_PE_Task_P0 : USBPD_PE_Task_P1)
+#define OSTHREAD_PE_ATTR(__PORT__)  (((__PORT__) == USBPD_PORT_0) ? &PE0_Thread_Atrr : &PE1_Thread_Atrr)
+#endif /* osCMSIS < 0x20000U */
+
+/* Private macro -------------------------------------------------------------*/
+#define CHECK_PE_FUNCTION_CALL(_function_)  _retr = _function_;                  \
+                                            if(USBPD_OK != _retr) {return _retr;}
+#define CHECK_CAD_FUNCTION_CALL(_function_) if(USBPD_CAD_OK != _function_) {return USBPD_ERROR;}
+
+#if defined(_DEBUG_TRACE)
+#define DPM_CORE_DEBUG_TRACE(_PORTNUM_, __MESSAGE__)  USBPD_TRACE_Add(USBPD_TRACE_DEBUG, _PORTNUM_, 0u, (uint8_t *)(__MESSAGE__), sizeof(__MESSAGE__) - 1u);
+#else
+#define DPM_CORE_DEBUG_TRACE(_PORTNUM_, __MESSAGE__)
+#endif /* _DEBUG_TRACE */
+
+/* Private variables ---------------------------------------------------------*/
+static osThreadId DPM_PEThreadId_Table[USBPD_PORT_COUNT];
+static osMessageQId CADQueueId;
+static osMessageQId PEQueueId[USBPD_PORT_COUNT];
+
+USBPD_ParamsTypeDef   DPM_Params[USBPD_PORT_COUNT];
+
+/* Private function prototypes -----------------------------------------------*/
+static void USBPD_PE_TaskWakeUp(uint8_t PortNum);
+static void DPM_ManageAttachedState(uint8_t PortNum, USBPD_CAD_EVENT State, CCxPin_TypeDef Cc);
+void USBPD_DPM_CADCallback(uint8_t PortNum, USBPD_CAD_EVENT State, CCxPin_TypeDef Cc);
+static void USBPD_DPM_CADTaskWakeUp(void);
+
+/**
+  * @brief  Initialize the core stack (port power role, PWR_IF, CAD and PE Init procedures)
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_DPM_InitCore(void)
+{
+  /* variable to get dynamique memory allocated by usbpd stack */
+  uint32_t stack_dynamemsize;
+  USBPD_StatusTypeDef _retr = USBPD_OK;
+
+  static const USBPD_PE_Callbacks dpmCallbacks =
+  {
+    USBPD_DPM_SetupNewPower,
+    USBPD_DPM_HardReset,
+    NULL,
+    USBPD_DPM_Notification,
+    USBPD_DPM_ExtendedMessageReceived,
+    USBPD_DPM_GetDataInfo,
+    USBPD_DPM_SetDataInfo,
+    USBPD_DPM_EvaluateRequest,
+    NULL,
+    NULL,
+    USBPD_PE_TaskWakeUp,
+#if defined(_VCONN_SUPPORT)
+    USBPD_DPM_EvaluateVconnSwap,
+    USBPD_DPM_PE_VconnPwr,
+#else
+    NULL,
+    NULL,
+#endif /* _VCONN_SUPPORT */
+    NULL,
+    USBPD_DPM_EvaluateDataRoleSwap,
+    USBPD_DPM_IsPowerReady
+  };
+
+  static const USBPD_CAD_Callbacks CAD_cbs = { USBPD_DPM_CADCallback, USBPD_DPM_CADTaskWakeUp };
+
+  /* Check the lib selected */
+  if (USBPD_TRUE != USBPD_PE_CheckLIB(_LIB_ID))
+  {
+    return USBPD_ERROR;
+  }
+
+  /* to get how much memory are dynamically allocated by the stack
+     the memory return is corresponding to 2 ports so if the application
+     managed only one port divide the value return by 2                   */
+  stack_dynamemsize = USBPD_PE_GetMemoryConsumption();
+
+  /* done to avoid warning */
+  (void)stack_dynamemsize;
+
+  /* Variable to be sure that DPM is correctly initialized */
+  DPM_Params[USBPD_PORT_0].DPM_Initialized = USBPD_FALSE;
+#if USBPD_PORT_COUNT == 2
+  DPM_Params[USBPD_PORT_1].DPM_Initialized = USBPD_FALSE;
+#endif /* USBPD_PORT_COUNT == 2 */
+
+  /* check the stack settings */
+  DPM_Params[USBPD_PORT_0].PE_SpecRevision  = DPM_Settings[USBPD_PORT_0].PE_SpecRevision;
+  DPM_Params[USBPD_PORT_0].PE_PowerRole     = DPM_Settings[USBPD_PORT_0].PE_DefaultRole;
+  DPM_Params[USBPD_PORT_0].PE_SwapOngoing   = USBPD_FALSE;
+  DPM_Params[USBPD_PORT_0].ActiveCCIs       = CCNONE;
+  DPM_Params[USBPD_PORT_0].VconnCCIs        = CCNONE;
+  DPM_Params[USBPD_PORT_0].VconnStatus      = USBPD_FALSE;
+#if USBPD_PORT_COUNT == 2
+  DPM_Params[USBPD_PORT_1].PE_SpecRevision  = DPM_Settings[USBPD_PORT_1].PE_SpecRevision;
+  DPM_Params[USBPD_PORT_1].PE_PowerRole     = DPM_Settings[USBPD_PORT_1].PE_DefaultRole;
+  DPM_Params[USBPD_PORT_1].PE_SwapOngoing   = USBPD_FALSE;
+  DPM_Params[USBPD_PORT_1].ActiveCCIs       = CCNONE;
+  DPM_Params[USBPD_PORT_1].VconnCCIs        = CCNONE;
+  DPM_Params[USBPD_PORT_1].VconnStatus      = USBPD_FALSE;
+#endif /* USBPD_PORT_COUNT == 2 */
+
+  /* Initialise the TRACE */
+  USBPD_TRACE_Init();
+
+  /* CAD SET UP : Port 0 */
+  CHECK_CAD_FUNCTION_CALL(USBPD_CAD_Init(USBPD_PORT_0, (USBPD_CAD_Callbacks *)&CAD_cbs, (USBPD_SettingsTypeDef *)&DPM_Settings[USBPD_PORT_0], &DPM_Params[USBPD_PORT_0]));
+#if USBPD_PORT_COUNT == 2
+  CHECK_CAD_FUNCTION_CALL(USBPD_CAD_Init(USBPD_PORT_1, (USBPD_CAD_Callbacks *)&CAD_cbs, (USBPD_SettingsTypeDef *)&DPM_Settings[USBPD_PORT_1], &DPM_Params[USBPD_PORT_1]));
+#endif /* USBPD_PORT_COUNT == 2 */
+
+  /* PE SET UP : Port 0 */
+  CHECK_PE_FUNCTION_CALL(USBPD_PE_Init(USBPD_PORT_0, (USBPD_SettingsTypeDef *)&DPM_Settings[USBPD_PORT_0], &DPM_Params[USBPD_PORT_0], &dpmCallbacks));
+#if USBPD_PORT_COUNT == 2
+  CHECK_PE_FUNCTION_CALL(USBPD_PE_Init(USBPD_PORT_1, (USBPD_SettingsTypeDef *)&DPM_Settings[USBPD_PORT_1], &DPM_Params[USBPD_PORT_1], &dpmCallbacks));
+#endif /* USBPD_PORT_COUNT == 2 */
+
+  /* DPM is correctly initialized */
+  DPM_Params[USBPD_PORT_0].DPM_Initialized = USBPD_TRUE;
+#if USBPD_PORT_COUNT == 2
+  DPM_Params[USBPD_PORT_1].DPM_Initialized = USBPD_TRUE;
+#endif /* USBPD_PORT_COUNT == 2 */
+
+  /* Enable CAD on Port 0 */
+  USBPD_CAD_PortEnable(USBPD_PORT_0, USBPD_CAD_ENABLE);
+#if USBPD_PORT_COUNT == 2
+  USBPD_CAD_PortEnable(USBPD_PORT_1, USBPD_CAD_ENABLE);
+#endif /* USBPD_PORT_COUNT == 2 */
+
+  return _retr;
+}
+
+/**
+  * @brief  Initialize the OS parts (task, queue,... )
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_DPM_InitOS(void)
+{
+#if (osCMSIS < 0x20000U)
+  CADQueueId = osMessageCreate(osMessageQ(queueCAD), NULL);
+  if (osThreadCreate(osThread(CAD), NULL) == NULL)
+#else
+  CADQueueId = osMessageQueueNew (2, sizeof(uint16_t), NULL);
+  if (NULL == osThreadNew(USBPD_CAD_Task, &CADQueueId, &CAD_Thread_Atrr))
+#endif /* osCMSIS < 0x20000U */
+  {
+    return USBPD_ERROR;
+  }
+
+  /* Create the queue corresponding to PE task */
+#if (osCMSIS < 0x20000U)
+  PEQueueId[0] = osMessageCreate(osMessageQ(queuePE), NULL);
+#if USBPD_PORT_COUNT == 2
+  PEQueueId[1] = osMessageCreate(osMessageQ(queuePE), NULL);
+#endif /* USBPD_PORT_COUNT == 2 */
+#else
+  PEQueueId[0] = osMessageQueueNew (1, sizeof(uint16_t), NULL);
+#if USBPD_PORT_COUNT == 2
+  PEQueueId[1] = osMessageQueueNew (1, sizeof(uint16_t), NULL);
+#endif /* USBPD_PORT_COUNT == 2 */
+#endif /* osCMSIS < 0x20000U */
+
+  /* PE task to be created on attachment */
+  DPM_PEThreadId_Table[USBPD_PORT_0] = NULL;
+#if USBPD_PORT_COUNT == 2
+  DPM_PEThreadId_Table[USBPD_PORT_1] = NULL;
+#endif /* USBPD_PORT_COUNT == 2 */
+
+  return USBPD_OK;
+}
+
+/**
+  * @brief  Initialize the OS parts (port power role, PWR_IF, CAD and PE Init procedures)
+  * @retval None
+  */
+void USBPD_DPM_Run(void)
+{
+#if (osCMSIS >= 0x20000U)
+  osKernelInitialize();
+#endif /* osCMSIS >= 0x20000U */
+  osKernelStart();
+}
+
+/**
+  * @brief  Initialize DPM (port power role, PWR_IF, CAD and PE Init procedures)
+  * @retval USBPD status
+  */
+void USBPD_DPM_TimerCounter(void)
+{
+  /* Call PE/PRL timers functions only if DPM is initialized */
+  if (USBPD_TRUE == DPM_Params[USBPD_PORT_0].DPM_Initialized)
+  {
+    USBPD_DPM_UserTimerCounter(USBPD_PORT_0);
+    USBPD_PE_TimerCounter(USBPD_PORT_0);
+    USBPD_PRL_TimerCounter(USBPD_PORT_0);
+  }
+#if USBPD_PORT_COUNT==2
+  if (USBPD_TRUE == DPM_Params[USBPD_PORT_1].DPM_Initialized)
+  {
+    USBPD_DPM_UserTimerCounter(USBPD_PORT_1);
+    USBPD_PE_TimerCounter(USBPD_PORT_1);
+    USBPD_PRL_TimerCounter(USBPD_PORT_1);
+  }
+#endif /* USBPD_PORT_COUNT == 2 */
+
+}
+
+/**
+  * @brief  WakeUp PE task
+  * @param  PortNum port number
+  * @retval None
+  */
+static void USBPD_PE_TaskWakeUp(uint8_t PortNum)
+{
+#if (osCMSIS < 0x20000U)
+  (void)osMessagePut(PEQueueId[PortNum], 0xFFFF, 0);
+#else
+  uint32_t event = 0xFFFFU;
+  (void)osMessageQueuePut(PEQueueId[PortNum], &event, 0U, 0U);
+#endif /* osCMSIS < 0x20000U */
+}
+
+/**
+  * @brief  WakeUp CAD task
+  * @retval None
+  */
+static void USBPD_DPM_CADTaskWakeUp(void)
+{
+#if (osCMSIS < 0x20000U)
+  (void)osMessagePut(CADQueueId, 0xFFFF, 0);
+#else
+  uint32_t event = 0xFFFFU;
+  (void)osMessageQueuePut(CADQueueId, &event, 0U, 0U);
+#endif /* osCMSIS < 0x20000U */
+}
+
+#if (osCMSIS < 0x20000U)
+/**
+  * @brief  Main task for PE layer
+  * @param  argument Not used
+  * @retval None
+  */
+void USBPD_PE_Task(void const *argument)
+{
+  uint8_t _port = (uint32_t)argument;
+  uint32_t _timing;
+
+  for(;;)
+  {
+    _timing = USBPD_PE_StateMachine_SRC(_port);
+    osMessageGet(PEQueueId[_port],_timing);
+  }
+}
+
+#else /* osCMSIS > 0x20000U */
+
+/**
+  * @brief  Main task for PE layer on Port0
+  * @param  argument Not used
+  * @retval None
+  */
+void USBPD_PE_Task_P0(void *argument)
+{
+  PE_Task(USBPD_PORT_0);
+}
+
+/**
+  * @brief  Main task for PE layer on Port1
+  * @param  argument Not used
+  * @retval None
+  */
+void USBPD_PE_Task_P1(void *argument)
+{
+  PE_Task(USBPD_PORT_1);
+}
+
+/**
+  * @brief  Main task for PE layer
+  * @param  argument Not used
+  * @retval None
+  */
+static void PE_Task(uint32_t PortNum)
+{
+  for (;;)
+  {
+    uint32_t event;
+    (void)osMessageQueueGet(PEQueueId[PortNum], &event, NULL,
+    USBPD_PE_StateMachine_SRC(PortNum));
+  }
+}
+#endif /* osCMSIS < 0x20000U */
+
+/**
+  * @brief  Main task for CAD layer
+  * @param  argument Not used
+  * @retval None
+  */
+#if (osCMSIS < 0x20000U)
+void USBPD_CAD_Task(void const *argument)
+#else
+void USBPD_CAD_Task(void *argument)
+#endif /* osCMSIS < 0x20000U */
+{
+  for (;;)
+  {
+#if (osCMSIS < 0x20000U)
+    osMessageGet(CADQueueId, USBPD_CAD_Process());
+#else
+    uint32_t event;
+    (void)osMessageQueueGet(CADQueueId, &event, NULL, USBPD_CAD_Process());
+#endif /* osCMSIS < 0x20000U */
+  }
+}
+
+/**
+  * @brief  CallBack reporting events on a specified port from CAD layer.
+  * @param  PortNum   The handle of the port
+  * @param  State     CAD state
+  * @param  Cc        The Communication Channel for the USBPD communication
+  * @retval None
+  */
+void USBPD_DPM_CADCallback(uint8_t PortNum, USBPD_CAD_EVENT State, CCxPin_TypeDef Cc)
+{
+  USBPD_TRACE_Add(USBPD_TRACE_CADEVENT, PortNum, (uint8_t)State, NULL, 0);
+
+  switch (State)
+  {
+    case USBPD_CAD_EVENT_ATTEMC :
+    {
+#ifdef _VCONN_SUPPORT
+      DPM_Params[PortNum].VconnStatus = USBPD_TRUE;
+#endif /* _VCONN_SUPPORT */
+      DPM_ManageAttachedState(PortNum, State, Cc);
+#ifdef _VCONN_SUPPORT
+      DPM_CORE_DEBUG_TRACE(PortNum, "Note: VconnStatus=TRUE");
+#endif /* _VCONN_SUPPORT */
+      break;
+    }
+    case USBPD_CAD_EVENT_ATTACHED :
+      DPM_ManageAttachedState(PortNum, State, Cc);
+      break;
+    case USBPD_CAD_EVENT_DETACHED :
+    case USBPD_CAD_EVENT_EMC :
+    {
+      /* The ufp is detached */
+      (void)USBPD_PE_IsCableConnected(PortNum, 0);
+      /* Terminate PE task */
+      if (DPM_PEThreadId_Table[PortNum] != NULL)
+      {
+        osThreadTerminate(DPM_PEThreadId_Table[PortNum]);
+        DPM_PEThreadId_Table[PortNum] = NULL;
+      }
+      DPM_Params[PortNum].PE_SwapOngoing = USBPD_FALSE;
+      DPM_Params[PortNum].ActiveCCIs = CCNONE;
+      DPM_Params[PortNum].PE_Power   = USBPD_POWER_NO;
+      USBPD_DPM_UserCableDetection(PortNum, State);
+#ifdef _VCONN_SUPPORT
+      DPM_Params[PortNum].VconnCCIs = CCNONE;
+      DPM_Params[PortNum].VconnStatus = USBPD_FALSE;
+      DPM_CORE_DEBUG_TRACE(PortNum, "Note: VconnStatus=FALSE");
+#endif /* _VCONN_SUPPORT */
+      break;
+    }
+    default :
+      /* nothing to do */
+      break;
+  }
+}
+
+static void DPM_ManageAttachedState(uint8_t PortNum, USBPD_CAD_EVENT State, CCxPin_TypeDef Cc)
+{
+#ifdef _VCONN_SUPPORT
+  if (CC1 == Cc)
+  {
+    DPM_Params[PortNum].VconnCCIs = CC2;
+  }
+  if (CC2 == Cc)
+  {
+    DPM_Params[PortNum].VconnCCIs = CC1;
+  }
+#endif /* _VCONN_SUPPORT */
+  DPM_Params[PortNum].ActiveCCIs = Cc;
+  (void)USBPD_PE_IsCableConnected(PortNum, 1);
+
+  USBPD_DPM_UserCableDetection(PortNum, State);
+
+  /* Create PE task */
+  if (DPM_PEThreadId_Table[PortNum] == NULL)
+  {
+#if (osCMSIS < 0x20000U)
+    DPM_PEThreadId_Table[PortNum] = osThreadCreate(OSTHREAD_PE(PortNum), (void *)((uint32_t)PortNum));
+#else
+    DPM_PEThreadId_Table[PortNum] = osThreadNew(OSTHREAD_PE(PortNum), NULL, OSTHREAD_PE_ATTR(PortNum));
+#endif /* osCMSIS < 0x20000U */
+    if (DPM_PEThreadId_Table[PortNum] == NULL)
+    {
+      /* should not occur. May be an issue with FreeRTOS heap size too small */
+      while (1);
+    }
+  }
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/usbpd_dpm_user.c b/USB-PD_Provider_1port/Src/usbpd_dpm_user.c
new file mode 100644
index 0000000..2a6004e
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/usbpd_dpm_user.c
@@ -0,0 +1,1011 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usbpd_dpm_user.c
+  * @author  MCD Application Team
+  * @brief   USBPD DPM user code
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#define USBPD_DPM_USER_C
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "usbpd_core.h"
+#include "usbpd_dpm_user.h"
+#include "usbpd_pdo_defs.h"
+#include "usbpd_dpm_core.h"
+#include "usbpd_dpm_conf.h"
+#include "usbpd_vdm_user.h"
+#include "usbpd_pwr_if.h"
+#include "usbpd_pwr_user.h"
+#include "cmsis_os.h"
+#if defined(_TRACE)
+#include "usbpd_trace.h"
+#include "string.h"
+#include "stdio.h"
+#endif /* _TRACE */
+
+/** @addtogroup STM32_USBPD_APPLICATION
+  * @{
+  */
+
+/** @addtogroup STM32_USBPD_APPLICATION_DPM_USER
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN Private_Typedef */
+
+/* USER CODE END Private_Typedef */
+
+/* Private define ------------------------------------------------------------*/
+/** @defgroup USBPD_USER_PRIVATE_DEFINES USBPD USER Private Defines
+  * @{
+  */
+#define DPM_GUI_NOTIF_ISCONNECTED       (1 << 5)
+#define DPM_GUI_NOTIF_POWER_EVENT       (1 << 15)
+#if (osCMSIS < 0x20000U)
+void                USBPD_DPM_UserExecute(void const *argument);
+#else
+void                USBPD_DPM_UserExecute(void *argument);
+#endif /* osCMSIS < 0x20000U */
+/* USER CODE BEGIN Private_Define */
+
+/* USER CODE END Private_Define */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup USBPD_USER_PRIVATE_MACROS USBPD USER Private Macros
+  * @{
+  */
+#if defined(_TRACE)
+#define DPM_USER_DEBUG_TRACE_SIZE       50u
+#define DPM_USER_DEBUG_TRACE(_PORT_, ...)  do {                                                                \
+      char _str[DPM_USER_DEBUG_TRACE_SIZE];                                                                    \
+      uint8_t _size = snprintf(_str, DPM_USER_DEBUG_TRACE_SIZE, __VA_ARGS__);                                  \
+      if (_size < DPM_USER_DEBUG_TRACE_SIZE)                                                                   \
+        USBPD_TRACE_Add(USBPD_TRACE_DEBUG, (uint8_t)(_PORT_), 0, (uint8_t*)_str, strlen(_str));                \
+      else                                                                                                     \
+        USBPD_TRACE_Add(USBPD_TRACE_DEBUG, (uint8_t)(_PORT_), 0, (uint8_t*)_str, DPM_USER_DEBUG_TRACE_SIZE);   \
+  } while(0)
+
+#define DPM_USER_ERROR_TRACE(_PORT_, _STATUS_, ...)  do {                                                      \
+    if (USBPD_OK != _STATUS_) {                                                                                \
+        char _str[DPM_USER_DEBUG_TRACE_SIZE];                                                                  \
+        uint8_t _size = snprintf(_str, DPM_USER_DEBUG_TRACE_SIZE, __VA_ARGS__);                                \
+        if (_size < DPM_USER_DEBUG_TRACE_SIZE)                                                                 \
+          USBPD_TRACE_Add(USBPD_TRACE_DEBUG, (uint8_t)(_PORT_), 0, (uint8_t*)_str, strlen(_str));              \
+        else                                                                                                   \
+          USBPD_TRACE_Add(USBPD_TRACE_DEBUG, (uint8_t)(_PORT_), 0, (uint8_t*)_str, DPM_USER_DEBUG_TRACE_SIZE); \
+    }                                                                                                          \
+  } while(0)
+#else
+#define DPM_USER_DEBUG_TRACE(_PORT_, ...)
+#define DPM_USER_ERROR_TRACE(_PORT_, _STATUS_, ...)
+#endif /* _TRACE */
+/* USER CODE BEGIN Private_Macro */
+
+/* USER CODE END Private_Macro */
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup USBPD_USER_PRIVATE_VARIABLES USBPD USER Private Variables
+  * @{
+  */
+GUI_NOTIFICATION_POST         DPM_GUI_PostNotificationMessage   = NULL;
+GUI_NOTIFICATION_FORMAT_SEND  DPM_GUI_FormatAndSendNotification = NULL;
+GUI_SAVE_INFO                 DPM_GUI_SaveInfo                  = NULL;
+/* USER CODE BEGIN Private_Variables */
+USBPD_HandleTypeDef DPM_Ports[USBPD_PORT_COUNT];
+/* USER CODE END Private_Variables */
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup USBPD_USER_PRIVATE_FUNCTIONS USBPD USER Private Functions
+  * @{
+  */
+/* USER CODE BEGIN USBPD_USER_PRIVATE_FUNCTIONS_Prototypes */
+
+/* USER CODE END USBPD_USER_PRIVATE_FUNCTIONS_Prototypes */
+/**
+  * @}
+  */
+
+/* Exported functions ------- ------------------------------------------------*/
+/** @defgroup USBPD_USER_EXPORTED_FUNCTIONS USBPD USER Exported Functions
+  * @{
+  */
+/* USER CODE BEGIN USBPD_USER_EXPORTED_FUNCTIONS */
+
+/* USER CODE END USBPD_USER_EXPORTED_FUNCTIONS */
+
+/** @defgroup USBPD_USER_EXPORTED_FUNCTIONS_GROUP1 USBPD USER Exported Functions called by DPM CORE
+  * @{
+  */
+/* USER CODE BEGIN USBPD_USER_EXPORTED_FUNCTIONS_GROUP1 */
+
+/* USER CODE END USBPD_USER_EXPORTED_FUNCTIONS_GROUP1 */
+
+/**
+  * @brief  Initialize DPM (port power role, PWR_IF, CAD and PE Init procedures)
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_UserInit(void)
+{
+/* USER CODE BEGIN USBPD_DPM_UserInit */
+  /* PWR SET UP */
+  if(USBPD_OK !=  USBPD_PWR_IF_Init())
+  {
+    return USBPD_ERROR;
+  }
+  return USBPD_OK;
+/* USER CODE END USBPD_DPM_UserInit */
+}
+
+/**
+  * @brief  Function to set the function ptr linked to GUI interface
+  * @param  PtrFormatSend Pointer on function to format and send GUI notifications
+  * @param  PtrPost       Pointer on function to send GUI notifications
+  * @param  PtrSaveInfo   Pointer on function to save information from Port Partner
+  * @retval None
+  */
+void USBPD_DPM_SetNotification_GUI(GUI_NOTIFICATION_FORMAT_SEND PtrFormatSend, GUI_NOTIFICATION_POST PtrPost, GUI_SAVE_INFO PtrSaveInfo)
+{
+  DPM_GUI_PostNotificationMessage   = PtrPost;
+  DPM_GUI_FormatAndSendNotification = PtrFormatSend;
+  DPM_GUI_SaveInfo                  = PtrSaveInfo;
+}
+
+/**
+  * @brief  User processing time, it is recommended to avoid blocking task for long time
+  * @param  argument  DPM User event
+  * @retval None
+  */
+#if (osCMSIS < 0x20000U)
+void USBPD_DPM_UserExecute(void const *argument)
+#else
+void USBPD_DPM_UserExecute(void *argument)
+#endif /* osCMSIS < 0x20000U */
+{
+/* USER CODE BEGIN USBPD_DPM_UserExecute */
+
+/* USER CODE END USBPD_DPM_UserExecute */
+}
+
+/**
+  * @brief  UserCableDetection reporting events on a specified port from CAD layer.
+  * @param  PortNum The handle of the port
+  * @param  State CAD state
+  * @retval None
+  */
+void USBPD_DPM_UserCableDetection(uint8_t PortNum, USBPD_CAD_EVENT State)
+{
+  switch(State)
+  {
+  case USBPD_CAD_EVENT_ATTEMC:
+  case USBPD_CAD_EVENT_ATTACHED:
+    /* Format and send a notification to GUI if enabled */
+    if (NULL != DPM_GUI_FormatAndSendNotification)
+    {
+      DPM_GUI_FormatAndSendNotification(PortNum, DPM_GUI_NOTIF_ISCONNECTED, 0);
+    }
+    break;
+  default :
+    /* Format and send a notification to GUI if enabled */
+    if (NULL != DPM_GUI_FormatAndSendNotification)
+    {
+      DPM_GUI_FormatAndSendNotification(PortNum, DPM_GUI_NOTIF_ISCONNECTED | DPM_GUI_NOTIF_POWER_EVENT, 0);
+    }
+  }
+/* USER CODE BEGIN USBPD_DPM_UserCableDetection */
+  switch(State)
+  {
+  case USBPD_CAD_EVENT_ATTACHED:
+  case USBPD_CAD_EVENT_ATTEMC:
+    {
+      if (USBPD_OK != USBPD_PWR_IF_VBUSEnable(PortNum))
+      {
+        /* Should not occur */
+        osDelay(6000);
+        NVIC_SystemReset();
+      }
+      break;
+    }
+  case USBPD_CAD_EVENT_DETACHED :
+  case USBPD_CAD_EVENT_EMC :
+  default :
+    {
+      if (USBPD_OK != USBPD_PWR_IF_VBUSDisable(PortNum))
+      {
+        /* Should not occur */
+        while(1);
+      }
+      break;
+    }
+  }
+/* USER CODE END USBPD_DPM_UserCableDetection */
+}
+
+/**
+  * @brief  function used to manage user timer.
+  * @param  PortNum Port number
+  * @retval None
+  */
+void USBPD_DPM_UserTimerCounter(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_DPM_UserTimerCounter */
+
+/* USER CODE END USBPD_DPM_UserTimerCounter */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup USBPD_USER_EXPORTED_FUNCTIONS_GROUP2 USBPD USER Exported Callbacks functions called by PE
+  * @{
+  */
+
+/**
+  * @brief  Callback function called by PE layer when HardReset message received from PRL
+  * @param  PortNum The current port number
+  * @param  CurrentRole the current role
+  * @param  Status status on hard reset event
+  * @retval None
+  */
+void USBPD_DPM_HardReset(uint8_t PortNum, USBPD_PortPowerRole_TypeDef CurrentRole, USBPD_HR_Status_TypeDef Status)
+{
+/* USER CODE BEGIN USBPD_DPM_HardReset */
+  switch (Status)
+  {
+  case USBPD_HR_STATUS_START_ACK:
+  case USBPD_HR_STATUS_START_REQ:
+    {
+      /* Reset the power supply */
+      USBPD_PWR_IF_VBUSDisable(PortNum);
+      break;
+    }
+  case USBPD_HR_STATUS_COMPLETED:
+    {
+      /* Reset the power supply */
+      USBPD_PWR_IF_VBUSEnable(PortNum);
+     break;
+    }
+  default:
+    break;
+  }
+/* USER CODE END USBPD_DPM_HardReset */
+}
+
+/**
+  * @brief  Request the DPM to setup the new power level.
+  * @param  PortNum The current port number
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_DPM_SetupNewPower(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_DPM_SetupNewPower */
+  return USBPD_PWR_IF_SetProfile(PortNum);
+/* USER CODE END USBPD_DPM_SetupNewPower */
+}
+
+/**
+  * @brief  Callback function called by PE to inform DPM about PE event.
+  * @param  PortNum The current port number
+  * @param  EventVal @ref USBPD_NotifyEventValue_TypeDef
+  * @retval None
+  */
+void USBPD_DPM_Notification(uint8_t PortNum, USBPD_NotifyEventValue_TypeDef EventVal)
+{
+  /* Forward PE notifications to GUI if enabled */
+  if (NULL != DPM_GUI_PostNotificationMessage)
+  {
+    DPM_GUI_PostNotificationMessage(PortNum, EventVal);
+  }
+/* USER CODE BEGIN USBPD_DPM_Notification */
+
+/* USER CODE END USBPD_DPM_Notification */
+}
+
+/**
+  * @brief  DPM callback to allow PE to retrieve information from DPM/PWR_IF.
+  * @param  PortNum Port number
+  * @param  DataId  Type of data to be updated in DPM based on @ref USBPD_CORE_DataInfoType_TypeDef
+  * @param  Ptr     Pointer on address where DPM data should be written (u8 pointer)
+  * @param  Size    Pointer on nb of u8 written by DPM
+  * @retval None
+  */
+void USBPD_DPM_GetDataInfo(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId, uint8_t *Ptr, uint32_t *Size)
+{
+/* USER CODE BEGIN USBPD_DPM_GetDataInfo */
+  /* Check type of information targeted by request */
+  switch(DataId)
+  {
+    /* Case Port Source PDO Data information :
+    Case Port SINK PDO Data information :
+    Call PWR_IF PDO reading request.
+    */
+  case USBPD_CORE_DATATYPE_SRC_PDO :
+  case USBPD_CORE_DATATYPE_SNK_PDO :
+    USBPD_PWR_IF_GetPortPDOs(PortNum, DataId, Ptr, Size);
+    *Size *= 4;
+    break;
+
+  default:
+    *Size = 0;
+  }
+/* USER CODE END USBPD_DPM_GetDataInfo */
+}
+
+/**
+  * @brief  DPM callback to allow PE to update information in DPM/PWR_IF.
+  * @param  PortNum Port number
+  * @param  DataId  Type of data to be updated in DPM based on @ref USBPD_CORE_DataInfoType_TypeDef
+  * @param  Ptr     Pointer on the data
+  * @param  Size    Nb of bytes to be updated in DPM
+  * @retval None
+  */
+void USBPD_DPM_SetDataInfo(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId, uint8_t *Ptr, uint32_t Size)
+{
+/* USER CODE BEGIN USBPD_DPM_SetDataInfo */
+  /* Check type of information targeted by request */
+  switch(DataId)
+  {
+  /* Case Received Request PDO Data information :
+   */
+  case USBPD_CORE_DATATYPE_RCV_REQ_PDO :
+    if (Size == 4)
+    {
+      memcpy((uint8_t *)&DPM_Ports[PortNum].DPM_RcvRequestDOMsg,  Ptr, 4);
+    }
+    break;
+
+    
+  /* In case of unexpected data type (Set request could not be fulfilled) :
+   */
+  default:
+    break;
+  }
+/* USER CODE END USBPD_DPM_SetDataInfo */
+
+  /* Forward info to GUI if enabled */
+  if (NULL != DPM_GUI_SaveInfo)
+  {
+    DPM_GUI_SaveInfo(PortNum, DataId, Ptr, Size);
+  }
+}
+
+/**
+  * @brief  Evaluate received Request Message from Sink port
+  * @param  PortNum Port number
+  * @param  PtrPowerObject  Pointer on the power data object
+  * @retval USBPD status : USBPD_ACCEPT, USBPD_REJECT, USBPD_WAIT, USBPD_GOTOMIN
+  */
+USBPD_StatusTypeDef USBPD_DPM_EvaluateRequest(uint8_t PortNum, USBPD_CORE_PDO_Type_TypeDef *PtrPowerObject)
+{
+/* USER CODE BEGIN USBPD_DPM_EvaluateRequest */
+  USBPD_StatusTypeDef _retr = USBPD_REJECT;
+  USBPD_PDO_TypeDef pdo;
+  USBPD_SNKRDO_TypeDef rdo;
+
+  /* read the request value received */
+  rdo.d32 = DPM_Ports[PortNum].DPM_RcvRequestDOMsg;
+
+  /* Search PDO in Port Source PDO list, that corresponds to Position provided in Request RDO */
+  if (USBPD_PWR_IF_SearchRequestedPDO(PortNum,  rdo.GenericRDO.ObjectPosition, &pdo.d32) == USBPD_OK)
+  {
+
+    /* Evaluate the request */
+    if(pdo.GenericPDO.PowerObject == USBPD_CORE_PDO_TYPE_FIXED)
+    {
+      if((rdo.FixedVariableRDO.OperatingCurrentIn10mAunits > pdo.SRCFixedPDO.MaxCurrentIn10mAunits)
+         || (rdo.FixedVariableRDO.MaxOperatingCurrent10mAunits > pdo.SRCFixedPDO.MaxCurrentIn10mAunits))
+      {
+        /* Sink requests too much maximum operating current */
+        /* USBPD_DPM_EvaluateRequest: Sink requests too much maximum operating current */
+        _retr =  USBPD_REJECT;
+      }
+      else
+      {
+        /* Save the power object */
+        *PtrPowerObject = pdo.GenericPDO.PowerObject;
+        /* Set RDO position and requested voltage in DPM port structure */
+        DPM_Ports[PortNum].DPM_RequestedVoltage = pdo.SRCFixedPDO.VoltageIn50mVunits * 50;
+        DPM_Ports[PortNum].DPM_RDOPositionPrevious = DPM_Ports[PortNum].DPM_RDOPosition;
+        DPM_Ports[PortNum].DPM_RDOPosition = rdo.GenericRDO.ObjectPosition;
+         _retr = USBPD_ACCEPT;
+      }
+    }
+  }
+
+  return _retr;
+/* USER CODE END USBPD_DPM_EvaluateRequest */
+}
+
+/**
+  * @brief  Callback to be used by PE to evaluate a Vconn swap
+  * @param  PortNum Port number
+  * @retval USBPD_ACCEPT, USBPD_REJECT, USBPD_WAIT
+  */
+USBPD_StatusTypeDef USBPD_DPM_EvaluateVconnSwap(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_DPM_EvaluateVconnSwap */
+  USBPD_StatusTypeDef status = USBPD_REJECT;
+  if (USBPD_TRUE == DPM_USER_Settings[PortNum].PE_VconnSwap)
+  {
+    status = USBPD_ACCEPT;
+  }
+
+  return status;
+/* USER CODE END USBPD_DPM_EvaluateVconnSwap */
+}
+
+/**
+  * @brief  Callback to be used by PE to manage VConn
+  * @param  PortNum Port number
+  * @param  State Enable or Disable VConn on CC lines
+  * @retval USBPD_ACCEPT, USBPD_REJECT
+  */
+USBPD_StatusTypeDef USBPD_DPM_PE_VconnPwr(uint8_t PortNum, USBPD_FunctionalState State)
+{
+/* USER CODE BEGIN USBPD_DPM_PE_VconnPwr */
+  return USBPD_ERROR;
+/* USER CODE END USBPD_DPM_PE_VconnPwr */
+}
+
+/**
+  * @brief  DPM callback to allow PE to forward extended message information.
+  * @param  PortNum Port number
+  * @param  MsgType Type of message to be handled in DPM
+  *         This parameter can be one of the following values:
+  *           @arg @ref USBPD_EXT_SECURITY_REQUEST Security Request extended message
+  *           @arg @ref USBPD_EXT_SECURITY_RESPONSE Security Response extended message
+  * @param  ptrData   Pointer on address Extended Message data could be read (u8 pointer)
+  * @param  DataSize  Nb of u8 that compose Extended message
+  * @retval None
+  */
+void USBPD_DPM_ExtendedMessageReceived(uint8_t PortNum, USBPD_ExtendedMsg_TypeDef MsgType, uint8_t *ptrData, uint16_t DataSize)
+{
+/* USER CODE BEGIN USBPD_DPM_ExtendedMessageReceived */
+
+/* USER CODE END USBPD_DPM_ExtendedMessageReceived */
+}
+
+/**
+  * @brief  Callback used to ask application the reply status for a DataRoleSwap request
+  * @note   if the callback is not set (ie NULL) the stack will automatically reject the request
+  * @param  PortNum Port number
+  * @retval Returned values are:
+            @ref USBPD_ACCEPT if DRS can be accepted
+            @ref USBPD_REJECT if DRS is not accepted in one data role (DFP or UFP) or in PD2.0 config
+            @ref USBPD_NOTSUPPORTED if DRS is not supported at all by the application (in both data roles) - P3.0 only
+  */
+USBPD_StatusTypeDef USBPD_DPM_EvaluateDataRoleSwap(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_DPM_EvaluateDataRoleSwap */
+  USBPD_StatusTypeDef status = USBPD_REJECT;
+  /* Sent NOT_SUPPORTED if DRS is not supported at all by the application (in both data roles) - P3.0 only */
+  if ((USBPD_FALSE == DPM_USER_Settings[PortNum].PE_DataSwap)
+    || ((USBPD_FALSE == DPM_USER_Settings[PortNum].PE_DR_Swap_To_DFP)
+    && (USBPD_FALSE == DPM_USER_Settings[PortNum].PE_DR_Swap_To_UFP)))
+  {
+    status = USBPD_NOTSUPPORTED;
+  }
+  else
+  {
+    /* ACCEPT DRS if at least supported by 1 data role */
+    if (((USBPD_TRUE == DPM_USER_Settings[PortNum].PE_DR_Swap_To_DFP) && (USBPD_PORTDATAROLE_UFP == DPM_Params[PortNum].PE_DataRole))
+       || ((USBPD_TRUE == DPM_USER_Settings[PortNum].PE_DR_Swap_To_UFP) && (USBPD_PORTDATAROLE_DFP == DPM_Params[PortNum].PE_DataRole)))
+    {
+      status = USBPD_ACCEPT;
+    }
+  }
+  return status;
+/* USER CODE END USBPD_DPM_EvaluateDataRoleSwap */
+}
+
+/**
+  * @brief  Callback to be used by PE to check is VBUS is ready or present
+  * @param  PortNum Port number
+  * @param  Vsafe   Vsafe status based on @ref USBPD_VSAFE_StatusTypeDef
+  * @retval USBPD_DISABLE or USBPD_ENABLE
+  */
+USBPD_FunctionalState USBPD_DPM_IsPowerReady(uint8_t PortNum, USBPD_VSAFE_StatusTypeDef Vsafe)
+{
+/* USER CODE BEGIN USBPD_DPM_IsPowerReady */
+  return ((USBPD_OK == USBPD_PWR_IF_SupplyReady(PortNum, Vsafe)) ? USBPD_ENABLE : USBPD_DISABLE);
+/* USER CODE END USBPD_DPM_IsPowerReady */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup USBPD_USER_EXPORTED_FUNCTIONS_GROUP3 USBPD USER Functions PD messages requests
+  * @{
+  */
+
+/**
+  * @brief  Request the PE to send a hard reset
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestHardReset(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_HardReset(PortNum);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "HARD RESET not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a cable reset.
+  * @note   Only a DFP Shall generate Cable Reset Signaling. A DFP Shall only generate Cable Reset Signaling within an Explicit Contract.
+            The DFP has to be supplying VCONN prior to a Cable Reset
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestCableReset(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CableReset(PortNum);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "CABLE RESET not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a GOTOMIN message
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGotoMin(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_GOTOMIN, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GOTOMIN not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a PING message
+  * @note   In USB-PD stack, only ping management for P3.0 is implemented.
+  *         If PD2.0 is used, PING timer needs to be implemented on user side.
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestPing(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_PING, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "PING not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a request message.
+  * @param  PortNum     The current port number
+  * @param  IndexSrcPDO Index on the selected SRC PDO (value between 1 to 7)
+  * @param  RequestedVoltage Requested voltage (in MV and use mainly for APDO)
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestMessageRequest(uint8_t PortNum, uint8_t IndexSrcPDO, uint16_t RequestedVoltage)
+{
+  USBPD_StatusTypeDef _status = USBPD_ERROR;
+/* USER CODE BEGIN USBPD_DPM_RequestMessageRequest */
+  /* To be adapted to call the PE function */
+  /*       _status = USBPD_PE_Send_Request(PortNum, rdo.d32, pdo_object);*/
+  DPM_USER_DEBUG_TRACE(PortNum, "ADVICE: update USBPD_DPM_RequestMessageRequest");
+/* USER CODE END USBPD_DPM_RequestMessageRequest */
+  DPM_USER_ERROR_TRACE(PortNum, _status, "REQUEST not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a GET_SRC_CAPA message
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetSourceCapability(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_GET_SRC_CAP, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_SRC_CAPA not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a GET_SNK_CAPA message
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetSinkCapability(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_GET_SNK_CAP, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_SINK_CAPA not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to perform a Data Role Swap.
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestDataRoleSwap(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_DR_SWAP, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "DRS not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to perform a Power Role Swap.
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestPowerRoleSwap(uint8_t PortNum)
+{
+  DPM_USER_ERROR_TRACE(PortNum, USBPD_ERROR, "PRS not accepted by the stack");
+  return USBPD_ERROR;
+}
+
+/**
+  * @brief  Request the PE to perform a VCONN Swap.
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestVconnSwap(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_VCONN_SWAP, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "VCS not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a soft reset
+  * @param  PortNum The current port number
+  * @param  SOPType SOP Type based on @ref USBPD_SOPType_TypeDef
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestSoftReset(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_SOFT_RESET, SOPType);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "SOFT_RESET not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a Source Capability message.
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestSourceCapability(uint8_t PortNum)
+{
+  /* PE will directly get the PDO saved in structure @ref PWR_Port_PDO_Storage */
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_DataMessage(PortNum, USBPD_DATAMSG_SRC_CAPABILITIES, NULL);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "SRC_CAPA not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a VDM discovery identity
+  * @param  PortNum The current port number
+  * @param  SOPType SOP Type
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestVDM_DiscoveryIdentify(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType)
+{
+  USBPD_StatusTypeDef _status = USBPD_ERROR;
+/* USER CODE BEGIN USBPD_DPM_RequestVDM_DiscoveryIdentify */
+  if (USBPD_SOPTYPE_SOP == SOPType)
+  {
+    _status = USBPD_PE_SVDM_RequestIdentity(PortNum, SOPType);
+  }
+/* USER CODE END USBPD_DPM_RequestVDM_DiscoveryIdentify */
+  DPM_USER_ERROR_TRACE(PortNum, _status, "VDM Discovery Ident not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a VDM discovery SVID
+  * @param  PortNum The current port number
+  * @param  SOPType SOP Type
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestVDM_DiscoverySVID(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_SVDM_RequestSVID(PortNum, SOPType);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "VDM discovery SVID not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to perform a VDM Discovery mode message on one SVID.
+  * @param  PortNum The current port number
+  * @param  SOPType SOP Type
+  * @param  SVID    SVID used for discovery mode message
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestVDM_DiscoveryMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_SVDM_RequestMode(PortNum, SOPType, SVID);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "VDM Discovery mode not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to perform a VDM mode enter.
+  * @param  PortNum   The current port number
+  * @param  SOPType   SOP Type
+  * @param  SVID      SVID used for discovery mode message
+  * @param  ModeIndex Index of the mode to be entered
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestVDM_EnterMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint8_t ModeIndex)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_SVDM_RequestModeEnter(PortNum, SOPType, SVID, ModeIndex);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "VDM mode enter not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to perform a VDM mode exit.
+  * @param  PortNum   The current port number
+  * @param  SOPType   SOP Type
+  * @param  SVID      SVID used for discovery mode message
+  * @param  ModeIndex Index of the mode to be exit
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestVDM_ExitMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint8_t ModeIndex)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_SVDM_RequestModeExit(PortNum, SOPType, SVID, ModeIndex);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "VDM mode exit not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a Display Port status
+  * @param  PortNum   The current port number
+  * @param  SOPType   SOP Type
+  * @param  SVID      Used SVID
+  * @param  pDPStatus Pointer on DP Status data (32 bit)
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestDisplayPortStatus(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint32_t *pDPStatus)
+{
+  USBPD_StatusTypeDef _status;
+/* USER CODE BEGIN USBPD_DPM_RequestDisplayPortStatus */
+  /*USBPD_VDM_FillDPStatus(PortNum, (USBPD_DPStatus_TypeDef*)pDPStatus);*/
+/* USER CODE END USBPD_DPM_RequestDisplayPortStatus */
+  _status = USBPD_PE_SVDM_RequestSpecific(PortNum, SOPType, SVDM_SPECIFIC_1, SVID);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "Display Port status not accepted by the stack");
+  return _status;
+}
+/**
+  * @brief  Request the PE to send a Display Port Config
+  * @param  PortNum   The current port number
+  * @param  SOPType   SOP Type
+  * @param  SVID      Used SVID
+  * @param  pDPConfig Pointer on DP Config data (32 bit)
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestDisplayPortConfig(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID, uint32_t *pDPConfig)
+{
+  USBPD_StatusTypeDef _status;
+/* USER CODE BEGIN USBPD_DPM_RequestDisplayPortConfig */
+  /*USBPD_VDM_FillDPConfig(PortNum, (USBPD_DPConfig_TypeDef*)pDPConfig);*/
+/* USER CODE END USBPD_DPM_RequestDisplayPortConfig */
+  _status = USBPD_PE_SVDM_RequestSpecific(PortNum, SOPType, SVDM_SPECIFIC_2, SVID);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "Display Port Config not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to perform a VDM Attention.
+  * @param  PortNum The current port number
+  * @param  SOPType SOP Type
+  * @param  SVID    Used SVID
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestAttention(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint16_t SVID)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_SVDM_RequestAttention(PortNum, SOPType, SVID);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "VDM ATTENTION not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send an ALERT to port partner
+  * @param  PortNum The current port number
+  * @param  Alert   Alert based on @ref USBPD_ADO_TypeDef
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestAlert(uint8_t PortNum, USBPD_ADO_TypeDef Alert)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_DataMessage(PortNum, USBPD_DATAMSG_ALERT, (uint32_t*)&Alert.d32);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "ALERT not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to get a source capability extended
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetSourceCapabilityExt(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_GET_SRC_CAPEXT, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_SRC_CAPA_EXT not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to get a sink capability extended
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetSinkCapabilityExt(uint8_t PortNum)
+{
+  DPM_USER_ERROR_TRACE(PortNum, USBPD_ERROR, "GET_SINK_CAPA_EXT not accepted by the stack");
+  return USBPD_ERROR;
+}
+
+/**
+  * @brief  Request the PE to get a manufacturer info
+  * @param  PortNum The current port number
+  * @param  SOPType SOP Type
+  * @param  pManuInfoData Pointer on manufacturer info based on @ref USBPD_GMIDB_TypeDef
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetManufacturerInfo(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, uint8_t* pManuInfoData)
+{
+  USBPD_StatusTypeDef _status = USBPD_ERROR;
+  if (USBPD_SOPTYPE_SOP == SOPType)
+  {
+    _status = USBPD_PE_SendExtendedMessage(PortNum, SOPType, USBPD_EXT_GET_MANUFACTURER_INFO, (uint8_t*)pManuInfoData, sizeof(USBPD_GMIDB_TypeDef));
+  }
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_MANU_INFO not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to request a GET_PPS_STATUS
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetPPS_Status(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_GET_PPS_STATUS, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_PPS_STATUS not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to request a GET_STATUS
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetStatus(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_GET_STATUS, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_STATUS not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to perform a Fast Role Swap.
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestFastRoleSwap(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_FR_SWAP, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "FRS not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a GET_COUNTRY_CODES message
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetCountryCodes(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_CtrlMessage(PortNum, USBPD_CONTROLMSG_GET_COUNTRY_CODES, USBPD_SOPTYPE_SOP);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_COUNTRY_CODES not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a GET_COUNTRY_INFO message
+  * @param  PortNum     The current port number
+  * @param  CountryCode Country code (1st character and 2nd of the Alpha-2 Country)
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetCountryInfo(uint8_t PortNum, uint16_t CountryCode)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_Request_DataMessage(PortNum, USBPD_DATAMSG_GET_COUNTRY_INFO, (uint32_t*)&CountryCode);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_COUNTRY_INFO not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a GET_BATTERY_CAPA
+  * @param  PortNum         The current port number
+  * @param  pBatteryCapRef  Pointer on the Battery Capability reference
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetBatteryCapability(uint8_t PortNum, uint8_t *pBatteryCapRef)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_SendExtendedMessage(PortNum, USBPD_SOPTYPE_SOP, USBPD_EXT_GET_BATTERY_CAP, (uint8_t*)pBatteryCapRef, 1);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_BATTERY_CAPA not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a GET_BATTERY_STATUS
+  * @param  PortNum           The current port number
+  * @param  pBatteryStatusRef Pointer on the Battery Status reference
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestGetBatteryStatus(uint8_t PortNum, uint8_t *pBatteryStatusRef)
+{
+  USBPD_StatusTypeDef _status = USBPD_PE_SendExtendedMessage(PortNum, USBPD_SOPTYPE_SOP, USBPD_EXT_GET_BATTERY_STATUS, (uint8_t*)pBatteryStatusRef, 1);
+  DPM_USER_ERROR_TRACE(PortNum, _status, "GET_BATTERY_STATUS not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @brief  Request the PE to send a SECURITY_REQUEST
+  * @param  PortNum The current port number
+  * @retval USBPD Status
+  */
+USBPD_StatusTypeDef USBPD_DPM_RequestSecurityRequest(uint8_t PortNum)
+{
+  USBPD_StatusTypeDef _status = USBPD_ERROR;
+  DPM_USER_ERROR_TRACE(PortNum, _status, "SECURITY_REQUEST not accepted by the stack");
+  return _status;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup USBPD_USER_PRIVATE_FUNCTIONS
+  * @{
+  */
+
+/* USER CODE BEGIN USBPD_USER_PRIVATE_FUNCTIONS */
+
+/* USER CODE END USBPD_USER_PRIVATE_FUNCTIONS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/usbpd_pwr_if.c b/USB-PD_Provider_1port/Src/usbpd_pwr_if.c
new file mode 100644
index 0000000..a47fd78
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/usbpd_pwr_if.c
@@ -0,0 +1,439 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usbpd_pwr_if.c
+  * @author  MCD Application Team
+  * @brief   This file contains power interface control functions.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#define __USBPD_PWR_IF_C
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbpd_pwr_if.h"
+#include "usbpd_hw_if.h"
+#include "usbpd_dpm_core.h"
+#include "usbpd_dpm_conf.h"
+#include "usbpd_pdo_defs.h"
+#include "usbpd_core.h"
+#if defined(_TRACE)
+#include "usbpd_trace.h"
+#endif /* _TRACE */
+#include "string.h"
+#include "gui_api.h"
+/* USER CODE BEGIN Include */
+
+/* USER CODE END Include */
+
+/** @addtogroup STM32_USBPD_APPLICATION
+  * @{
+  */
+
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF_Private_TypeDef
+  * @{
+  */
+/* USER CODE BEGIN Private_Typedef */
+
+/* USER CODE END Private_Typedef */
+/**
+  * @}
+  */
+
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF_Private_Defines
+  * @{
+  */
+/* USER CODE BEGIN Private_Define */
+
+/* USER CODE END Private_Define */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF_Private_Macros
+  * @{
+  */
+#if defined(_TRACE)
+#define PWR_IF_DEBUG_TRACE(_PORT_, __MESSAGE__)  USBPD_TRACE_Add(USBPD_TRACE_DEBUG, (_PORT_), 0u, (uint8_t*)(__MESSAGE__), sizeof(__MESSAGE__) - 1u)
+#else
+#define PWR_IF_DEBUG_TRACE(_PORT_, __MESSAGE__)
+#endif /* _TRACE */
+/* USER CODE BEGIN Private_Macro */
+
+/* USER CODE END Private_Macro */
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF_Private_Variables
+  * @{
+  */
+/* USER CODE BEGIN Private_Variables */
+/**
+  * @brief  USBPD Port PDO Storage array declaration
+  */
+
+/**** PDO ****/
+USBPD_PWR_Port_PDO_Storage_TypeDef PWR_Port_PDO_Storage[USBPD_PORT_COUNT];
+/* USER CODE END Private_Variables */
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF_Private_Functions
+  * @{
+  */
+/* USER CODE BEGIN USBPD_USER_PRIVATE_FUNCTIONS_Prototypes */
+
+/* USER CODE END USBPD_USER_PRIVATE_FUNCTIONS_Prototypes */
+/**
+  * @}
+  */
+
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF_Exported_Functions
+  * @{
+  */
+
+/**
+  * @brief  Initialize structures and variables related to power board profiles
+  *         used by Sink and Source, for all available ports.
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_Init(void)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_Init */
+  USBPD_StatusTypeDef _status = USBPD_OK;
+
+  /* Set links to PDO values and number for Port 0 (defined in PDO arrays in H file).
+   */
+  PWR_Port_PDO_Storage[USBPD_PORT_0].SourcePDO.ListOfPDO = (uint32_t *) PORT0_PDO_ListSRC;
+  PWR_Port_PDO_Storage[USBPD_PORT_0].SourcePDO.NumberOfPDO = &USBPD_NbPDO[1];
+
+  return _status;
+/* USER CODE END USBPD_PWR_IF_Init */
+}
+
+/**
+  * @brief  Sets the required power profile, now it works only with Fixed ones
+  * @param  PortNum Port number
+  * @retval USBPD status
+*/
+USBPD_StatusTypeDef USBPD_PWR_IF_SetProfile(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_SetProfile */
+  USBPD_StatusTypeDef      _ret = USBPD_ERROR;
+  USBPD_PDO_TypeDef        _pdo;
+  USBPD_SNKRDO_TypeDef     _rdo;
+
+  _rdo.d32 = DPM_Ports[PortNum].DPM_RcvRequestDOMsg;
+  if (0 == PortNum)
+    _pdo.d32 = PORT0_PDO_ListSRC[0];
+  else
+    _pdo.d32 = PORT0_PDO_ListSRC[0];
+
+  if(PWR_OK == BSP_USBPD_PWR_VBUSSetVoltage_Fixed(PortNum, _pdo.SRCFixedPDO.VoltageIn50mVunits * 50,
+                                                     (_rdo.FixedVariableRDO.OperatingCurrentIn10mAunits * 10),
+                                                     (_rdo.FixedVariableRDO.MaxOperatingCurrent10mAunits * 10)))
+  {
+     _ret = USBPD_OK;
+  }
+
+  return _ret;
+/* USER CODE END USBPD_PWR_IF_SetProfile */
+}
+
+/**
+  * @brief  Checks if the power on a specified port is ready
+  * @param  PortNum Port number
+  * @param  Vsafe   Vsafe status based on @ref USBPD_VSAFE_StatusTypeDef
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_SupplyReady(uint8_t PortNum, USBPD_VSAFE_StatusTypeDef Vsafe)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_SupplyReady */
+  return USBPD_ERROR;
+/* USER CODE END USBPD_PWR_IF_SupplyReady */
+}
+
+/**
+  * @brief  Enables VBUS power on a specified port
+  * @param  PortNum Port number
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_VBUSEnable(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_VBUSEnable */
+  USBPD_StatusTypeDef _status = (USBPD_StatusTypeDef)HW_IF_PWR_Enable(PortNum, USBPD_ENABLE, CCNONE, USBPD_FALSE, USBPD_PORTPOWERROLE_SRC);
+  return _status;
+/* USER CODE END USBPD_PWR_IF_VBUSEnable */
+}
+
+/**
+  * @brief  Disable VBUS/VCONN the power on a specified port
+  * @param  PortNum Port number
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_VBUSDisable(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_VBUSDisable */
+  USBPD_StatusTypeDef _status = (USBPD_StatusTypeDef)HW_IF_PWR_Enable(PortNum, USBPD_DISABLE, CCNONE, USBPD_FALSE, USBPD_PORTPOWERROLE_SRC);
+  return _status;
+/* USER CODE END USBPD_PWR_IF_VBUSDisable */
+}
+
+/**
+  * @brief  Checks if the power on a specified port is enabled
+  * @param  PortNum Port number
+  * @retval USBPD_ENABLE or USBPD_DISABLE
+  */
+USBPD_FunctionalState USBPD_PWR_IF_VBUSIsEnabled(uint8_t PortNum)
+{
+  /* Get the Status of the port */
+  return USBPD_PORT_IsValid(PortNum) ? (USBPD_FunctionalState)HW_IF_PWR_VBUSIsEnabled(PortNum) : USBPD_DISABLE;
+}
+
+/**
+  * @brief  Reads the voltage and the current on a specified port
+  * @param  PortNum Port number
+  * @param  pVoltage: The Voltage in mV
+  * @param  pCurrent: The Current in mA
+  * @retval USBPD_ERROR or USBPD_OK
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_ReadVA(uint8_t PortNum, uint16_t *pVoltage, uint16_t *pCurrent)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_ReadVA */
+  return USBPD_ERROR;
+/* USER CODE END USBPD_PWR_IF_ReadVA */
+}
+
+/**
+  * @brief  Enables the VConn on the port.
+  * @param  PortNum Port number
+  * @param  CC      Specifies the CCx to be selected based on @ref CCxPin_TypeDef structure
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_Enable_VConn(uint8_t PortNum, CCxPin_TypeDef CC)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_Enable_VConn */
+  return USBPD_ERROR;
+/* USER CODE END USBPD_PWR_IF_Enable_VConn */
+}
+
+/**
+  * @brief  Disable the VConn on the port.
+  * @param  PortNum Port number
+  * @param  CC      Specifies the CCx to be selected based on @ref CCxPin_TypeDef structure
+  * @retval USBPD status
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_Disable_VConn(uint8_t PortNum, CCxPin_TypeDef CC)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_Disable_VConn */
+  return USBPD_ERROR;
+/* USER CODE END USBPD_PWR_IF_Disable_VConn */
+}
+
+/**
+  * @brief  Allow PDO data reading from PWR_IF storage.
+  * @param  PortNum Port number
+  * @param  DataId Type of data to be read from PWR_IF
+  *         This parameter can be one of the following values:
+  *           @arg @ref USBPD_CORE_DATATYPE_SRC_PDO Source PDO reading requested
+  *           @arg @ref USBPD_CORE_DATATYPE_SNK_PDO Sink PDO reading requested
+  * @param  Ptr Pointer on address where PDO values should be written (u8 pointer)
+  * @param  Size Pointer on nb of u32 written by PWR_IF (nb of PDOs)
+  * @retval None
+  */
+void USBPD_PWR_IF_GetPortPDOs(uint8_t PortNum, USBPD_CORE_DataInfoType_TypeDef DataId, uint8_t *Ptr, uint32_t *Size)
+{
+    if (DataId == USBPD_CORE_DATATYPE_SRC_PDO)
+    {
+      *Size = USBPD_NbPDO[1];
+      memcpy(Ptr,PORT0_PDO_ListSRC, sizeof(uint32_t) * USBPD_NbPDO[1]);
+    }
+/* USER CODE BEGIN USBPD_PWR_IF_GetPortPDOs */
+  uint32_t   nbpdo, index, nb_valid_pdo = 0;
+  uint32_t   *ptpdoarray = NULL;
+  USBPD_PDO_TypeDef pdo_first;
+  USBPD_PDO_TypeDef pdo;
+  
+  /* Check if valid port */
+  if (USBPD_PORT_IsValid(PortNum))
+  {
+    /* According to type of PDO to be read, set pointer on values and nb of elements */
+    switch(DataId)
+    {
+    case USBPD_CORE_DATATYPE_SRC_PDO :
+      nbpdo = *PWR_Port_PDO_Storage[PortNum].SourcePDO.NumberOfPDO;
+      ptpdoarray = PWR_Port_PDO_Storage[PortNum].SourcePDO.ListOfPDO;
+      /* Save the 1st PDO */
+      pdo_first.d32 = *ptpdoarray;
+      /* Reset unchunked bit if current revision is PD2.0*/
+      if (USBPD_SPECIFICATION_REV2 == DPM_Params[PortNum].PE_SpecRevision)
+      {
+        pdo_first.SRCFixedPDO.UnchunkedExtendedMessage  = USBPD_PDO_SRC_FIXED_UNCHUNK_NOT_SUPPORTED;
+      }
+      break;
+    default :
+      nbpdo = 0;
+      break;
+    }
+    
+    /* Copy PDO data in output buffer */
+    for (index = 0; index < nbpdo; index++)
+    {
+      pdo.d32 = *ptpdoarray;
+      /* Copy only PDO (and not APDO in case of current revision is PD2.0) */
+      if ((USBPD_SPECIFICATION_REV2 == DPM_Params[PortNum].PE_SpecRevision)
+          && (pdo.GenericPDO.PowerObject == USBPD_CORE_PDO_TYPE_APDO))
+      {
+      }
+      else
+      {
+        /* Copy 1st PDO as potentially FRS or UNCHUNKED bits have been reset */
+        if (0 == index)
+        {
+          (void)memcpy(Ptr, (uint8_t*)&pdo_first.d32, 4u);
+        }
+        else
+        {
+          (void)memcpy((Ptr + (nb_valid_pdo * 4u)), (uint8_t*)ptpdoarray, 4u);
+        }
+        nb_valid_pdo++;
+      }
+      ptpdoarray++;
+    }
+    /* Set nb of read PDO (nb of u32 elements); */
+    *Size = nb_valid_pdo;
+  }
+/* USER CODE END USBPD_PWR_IF_GetPortPDOs */
+}
+
+/**
+  * @brief  Find out SRC PDO pointed out by a position provided in a Request DO (from Sink).
+  * @param  PortNum Port number
+  * @param  RdoPosition RDO Position in list of provided PDO
+  * @param  Pdo Pointer on PDO value pointed out by RDO position (u32 pointer)
+  * @retval Status of search
+  *         USBPD_OK : Src PDO found for requested DO position (output Pdo parameter is set)
+  *         USBPD_FAIL : Position is not compliant with current Src PDO for this port (no corresponding PDO value)
+  */
+USBPD_StatusTypeDef USBPD_PWR_IF_SearchRequestedPDO(uint8_t PortNum, uint32_t RdoPosition, uint32_t *Pdo)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_SearchRequestedPDO */
+  if((RdoPosition == 0) || (RdoPosition > *PWR_Port_PDO_Storage[PortNum].SourcePDO.NumberOfPDO))
+  {
+    /* Invalid PDO index */
+  return USBPD_FAIL;
+  }
+
+  *Pdo = PWR_Port_PDO_Storage[PortNum].SourcePDO.ListOfPDO[RdoPosition - 1];
+  return USBPD_OK;
+/* USER CODE END USBPD_PWR_IF_SearchRequestedPDO */
+}
+
+/**
+  * @brief  the function is called in case of critical issue is detected to switch in safety mode.
+  * @retval None
+  */
+void USBPD_PWR_IF_Alarm()
+{
+/* USER CODE BEGIN USBPD_PWR_IF_Alarm */
+
+/* USER CODE END USBPD_PWR_IF_Alarm */
+}
+
+/**
+  * @brief Function is called to get VBUS power status.
+  * @param PortNum Port number
+  * @param PowerTypeStatus  Power type status based on @ref USBPD_VBUSPOWER_STATUS
+  * @retval UBBPD_TRUE or USBPD_FALSE
+  */
+uint8_t USBPD_PWR_IF_GetVBUSStatus(uint8_t PortNum, USBPD_VBUSPOWER_STATUS PowerTypeStatus)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_GetVBUSStatus */
+  uint8_t _status = USBPD_FALSE;
+  uint32_t _vbus = HW_IF_PWR_GetVoltage(PortNum);
+
+  switch(PowerTypeStatus)
+  {
+  case USBPD_PWR_BELOWVSAFE0V :
+    if (_vbus < USBPD_PWR_LOW_VBUS_THRESHOLD) _status = USBPD_TRUE;
+    break;
+  case USBPD_PWR_VSAFE5V :
+    if (_vbus >= USBPD_PWR_HIGH_VBUS_THRESHOLD) _status = USBPD_TRUE;
+    break;
+  case USBPD_PWR_SNKDETACH:
+    if (_vbus < USBPD_PWR_HIGH_VBUS_THRESHOLD) _status = USBPD_TRUE;
+    break;
+  default :
+    break;
+  }
+  return _status;
+/* USER CODE END USBPD_PWR_IF_GetVBUSStatus */
+}
+
+/**
+  * @brief Function is called to set the VBUS threshold when a request has been accepted.
+  * @param PortNum Port number
+  * @retval None
+  */
+void USBPD_PWR_IF_UpdateVbusThreshold(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_UpdateVbusThreshold */
+/* USER CODE END USBPD_PWR_IF_UpdateVbusThreshold */
+}
+
+/**
+  * @brief Function is called to reset the VBUS threshold when there is a power reset.
+  * @param PortNum Port number
+  * @retval None
+  */
+void USBPD_PWR_IF_ResetVbusThreshold(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_PWR_IF_ResetVbusThreshold */
+/* USER CODE END USBPD_PWR_IF_ResetVbusThreshold */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32_USBPD_APPLICATION_POWER_IF_Private_Functions
+  * @{
+  */
+/* USER CODE BEGIN USBPD_USER_PRIVATE_FUNCTIONS_Definition */
+
+/* USER CODE END USBPD_USER_PRIVATE_FUNCTIONS_Definition */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Src/usbpd_pwr_user.c b/USB-PD_Provider_1port/Src/usbpd_pwr_user.c
new file mode 100644
index 0000000..79bec44
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/usbpd_pwr_user.c
@@ -0,0 +1,1181 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usbpd_pwr_user.c
+  * @author  MCD Application Team
+  * @brief   USBPD PWR user code
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbpd_pwr_user.h"
+#include "stm32g0xx_hal.h"
+#if defined(_TRACE)
+#include "usbpd_core.h"
+#include "usbpd_trace.h"
+#endif /* _TRACE */
+
+/* USER CODE BEGIN include */
+/* USER CODE END include */
+
+/** @addtogroup BSP
+  * @{
+  */
+
+/** @addtogroup POWER
+  * @{
+  */
+/** @defgroup POWER_Private_Typedef Private Typedef
+  * @{
+  */
+/* USER CODE BEGIN POWER_Private_Typedef */
+
+/* USER CODE END POWER_Private_Typedef */
+/**
+  * @}
+  */
+
+/** @defgroup POWER_Private_Constants Private Constants
+* @{
+*/
+/* USER CODE BEGIN POWER_Private_Constants */
+
+/* USER CODE END POWER_Private_Constants */
+/**
+  * @}
+  */
+
+/** @defgroup POWER_Private_Macros Private Macros
+  * @{
+  */
+#if defined(_TRACE)
+#define PWR_DEBUG_TRACE(_PORT_, __MESSAGE__)  USBPD_TRACE_Add(USBPD_TRACE_DEBUG,    (_PORT_), 0u, (uint8_t*)(__MESSAGE__), sizeof(__MESSAGE__) - 1u)
+#else
+#define PWR_DEBUG_TRACE(_PORT_, __MESSAGE__)
+#endif /* _TRACE */
+/* USER CODE BEGIN POWER_Private_Macros */
+
+/* USER CODE END POWER_Private_Macros */
+/**
+  * @}
+  */
+
+/** @defgroup POWER_Private_Variables Private Variables
+  * @{
+  */
+/* USER CODE BEGIN POWER_Private_Variables */
+
+/* USER CODE END POWER_Private_Variables */
+/**
+  * @}
+  */
+
+/** @defgroup POWER_Private_Functions Private Functions
+  * @{
+  */
+/* USER CODE BEGIN POWER_Private_Prototypes */
+
+/* USER CODE END POWER_Private_Prototypes */
+/**
+  * @}
+  */
+
+/** @defgroup POWER_Exported_Variables Exported Variables
+  * @{
+  */
+/* USER CODE BEGIN POWER_Exported_Variables */
+
+/* USER CODE END POWER_Exported_Variables */
+/**
+  * @}
+  */
+
+/** @addtogroup POWER_Exported_Functions
+  * @{
+  */
+/**
+  * @brief  Initialize the hardware resources used by the Type-C power delivery (PD)
+  *         controller.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSInit(uint32_t               PortId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSInit");
+/* USER CODE BEGIN BSP_PWR_VBUSInit */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSInit(PortId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VBUSInit */
+}
+
+/**
+  * @brief  Release the hardware resources used by the Type-C power delivery (PD)
+  *         controller.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSDeInit(uint32_t PortId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSDeInit");
+/* USER CODE BEGIN BSP_PWR_VBUSDeInit */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSDeInit(PortId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VBUSDeInit */
+}
+
+/**
+  * @brief  Enable power supply over VBUS.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSOn(uint32_t PortId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSOn");
+/* USER CODE BEGIN BSP_PWR_VBUSOn */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSOn(PortId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VBUSOn */
+}
+
+/**
+  * @brief  Disable power supply over VBUS.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSOff(uint32_t PortId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSOff");
+/* USER CODE BEGIN BSP_PWR_VBUSOff */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSOff(PortId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VBUSOff */
+}
+
+/**
+  * @brief  Set a fixed/variable PDO and manage the power control.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  VbusTargetInmv the vbus Target (in mV)
+  * @param  OperatingCurrent the Operating Current (in mA)
+  * @param  MaxOperatingCurrent the Max Operating Current (in mA)
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Fixed(uint32_t PortId,
+                                               uint32_t VbusTargetInmv,
+                                               uint32_t OperatingCurrent,
+                                               uint32_t MaxOperatingCurrent)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSSetVoltage_Fixed");
+/* USER CODE BEGIN BSP_PWR_VBUSSetVoltage_Fixed */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_Fixed(PortId, VbusTargetInmv, OperatingCurrent, MaxOperatingCurrent)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VBUSSetVoltage_Fixed */
+}
+
+/**
+  * @brief  Set a fixed/variable PDO and manage the power control.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  VbusTargetMinInmv the vbus Target min (in mV)
+  * @param  VbusTargetMaxInmv the vbus Target max (in mV)
+  * @param  OperatingCurrent the Operating Current (in mA)
+  * @param  MaxOperatingCurrent the Max Operating Current (in mA)
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Variable(uint32_t PortId,
+                                                  uint32_t VbusTargetMinInmv,
+                                                  uint32_t VbusTargetMaxInmv,
+                                                  uint32_t OperatingCurrent,
+                                                  uint32_t MaxOperatingCurrent)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSSetVoltage_Variable");
+/* USER CODE BEGIN BSP_PWR_VBUSSetVoltage_Variable */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_Variable(PortId, VbusTargetMinInmv, VbusTargetMaxInmv, OperatingCurrent, MaxOperatingCurrent)) ? PWR_OK : PWR_ERROR);
+/* USER CODE BEGIN BSP_PWR_VBUSSetVoltage_Variable */
+}
+
+/**
+  * @brief  Set a Battery PDO and manage the power control.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  VbusTargetMin the vbus Target min (in mV)
+  * @param  VbusTargetMax the vbus Target max (in mV)
+  * @param  OperatingPower the Operating Power (in mW)
+  * @param  MaxOperatingPower the Max Operating Power (in mW)
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_Battery(uint32_t PortId,
+                                                 uint32_t VbusTargetMin,
+                                                 uint32_t VbusTargetMax,
+                                                 uint32_t OperatingPower,
+                                                 uint32_t MaxOperatingPower)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSSetVoltage_Battery");
+/* USER CODE BEGIN BSP_PWR_VBUSSetVoltage_Battery */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_Battery(PortId, VbusTargetMin, VbusTargetMax, OperatingPower, MaxOperatingPower)) ? PWR_OK : PWR_ERROR);
+/* USER CODE BEGIN BSP_PWR_VBUSSetVoltage_Battery */
+}
+
+/**
+  * @brief  Set a APDO and manage the power control.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  VbusTargetInmv the vbus Target (in mV)
+  * @param  OperatingCurrent the Operating current (in mA)
+  * @param  Delta Delta between with previous APDO (in mV), 0 means APDO start
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VBUSSetVoltage_APDO(uint32_t PortId,
+                                              uint32_t VbusTargetInmv,
+                                              uint32_t OperatingCurrent,
+                                              int32_t Delta)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSSetVoltage_APDO");
+/* USER CODE BEGIN BSP_PWR_VBUSSetVoltage_APDO */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VBUSSetVoltage_APDO(PortId, VbusTargetInmv, OperatingCurrent, Delta)) ? PWR_OK : PWR_ERROR);
+/* USER CODE BEGIN BSP_PWR_VBUSSetVoltage_APDO */
+}
+
+/**
+  * @brief  Get actual voltage level measured on the VBUS line.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @retval Voltage measured voltage level (in mV)
+  */
+__weak uint32_t BSP_PWR_VBUSGetVoltage(uint32_t PortId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSGetVoltage");
+/* USER CODE BEGIN BSP_PWR_VBUSGetVoltage */
+  uint32_t voltage = 0;
+
+  (void)BSP_USBPD_PWR_VBUSGetVoltage(PortId, &voltage);
+
+  return voltage;
+/* USER CODE END BSP_PWR_VBUSGetVoltage */
+}
+
+/**
+  * @brief  Get actual current level measured on the VBUS line.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @retval Current measured current level (in mA)
+  */
+__weak int32_t BSP_PWR_VBUSGetCurrent(uint32_t PortId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSGetCurrent");
+/* USER CODE BEGIN BSP_PWR_VBUSGetCurrent */
+  int32_t current = 0;
+
+  (void)BSP_USBPD_PWR_VBUSGetCurrent(PortId, ¤t);
+
+  return current;
+/* USER CODE END BSP_PWR_VBUSGetCurrent */
+}
+
+/**
+  * @brief  Initialize VCONN sourcing.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_CC1
+  *         @arg TYPE_C_CC2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VCONNInit(uint32_t PortId,
+                                    uint32_t CCPinId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VCONNInit");
+/* USER CODE BEGIN BSP_PWR_VCONNInit */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNInit(PortId, CCPinId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VCONNInit */
+}
+
+/**
+  * @brief  Un-Initialize VCONN sourcing.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_CC1
+  *         @arg TYPE_C_CC2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VCONNDeInit(uint32_t PortId,
+                                      uint32_t CCPinId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VCONNDeInit");
+/* USER CODE BEGIN BSP_PWR_VCONNDeInit */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNDeInit(PortId, CCPinId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VCONNDeInit */
+}
+
+/**
+  * @brief  Enable VCONN sourcing.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_CC1
+  *         @arg TYPE_C_CC2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VCONNOn(uint32_t PortId,
+                                  uint32_t CCPinId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VCONNOn");
+/* USER CODE BEGIN BSP_PWR_VCONNOn */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNOn(PortId, CCPinId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VCONNOn */
+}
+
+/**
+  * @brief  Disable VCONN sourcing.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  CCPinId CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_CC1
+  *         @arg TYPE_C_CC2
+  * @retval PD controller status
+  */
+__weak PWR_StatusTypeDef BSP_PWR_VCONNOff(uint32_t PortId,
+                                   uint32_t CCPinId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VCONNOff");
+/* USER CODE BEGIN BSP_PWR_VCONNOff */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_VCONNOff(PortId, CCPinId)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_VCONNOff */
+}
+
+/**
+  * @brief  Set the VBUS disconnection voltage threshold.
+  * @note   Obsolete interface, new interface should be called.
+  * @note   Callback function registered through BSP_PWR_RegisterVBUSDetectCallback
+  *         function call is invoked when VBUS falls below programmed threshold.
+  * @note   By default VBUS disconnection threshold is set to 3.3V
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  VoltageThreshold: VBUS disconnection voltage threshold (in mV)
+  * @retval PD controller status
+  */
+__weak void BSP_PWR_SetVBUSDisconnectionThreshold(uint32_t PortId,
+                                           uint32_t VoltageThreshold)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_SetVBUSDisconnectionThreshold");
+/* USER CODE BEGIN BSP_PWR_SetVBUSDisconnectionThreshold */
+  (void)BSP_USBPD_PWR_SetVBUSDisconnectionThreshold(PortId, VoltageThreshold);
+/* USER CODE END BSP_PWR_SetVBUSDisconnectionThreshold */
+}
+
+/**
+  * @brief  Register USB Type-C Current callback function.
+  * @note   Obsolete interface, new interface should be called.
+  * @note   Callback function invoked when VBUS rises above 4V (VBUS present) or
+  *         when VBUS falls below programmed threshold (VBUS absent).
+  * @note   Callback function is un-registered when callback function pointer
+  *         argument is NULL.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  pfnVBUSDetectCallback callback function pointer
+  * @retval 0 success else fail
+  */
+__weak PWR_StatusTypeDef BSP_PWR_RegisterVBUSDetectCallback(uint32_t                       PortId,
+                                                     PWR_VBUSDetectCallbackFunc *   pfnVBUSDetectCallback)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_RegisterVBUSDetectCallback");
+/* USER CODE BEGIN BSP_PWR_RegisterVBUSDetectCallback */
+  return ((BSP_ERROR_NONE == BSP_USBPD_PWR_RegisterVBUSDetectCallback(PortId, (USBPD_PWR_VBUSDetectCallbackFunc*)pfnVBUSDetectCallback)) ? PWR_OK : PWR_ERROR);
+/* USER CODE END BSP_PWR_RegisterVBUSDetectCallback */
+}
+
+/**
+  * @brief  Get actual VBUS status.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @retval VBUS status (1: On, 0: Off)
+  */
+__weak uint8_t BSP_PWR_VBUSIsOn(uint32_t PortId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VBUSIsOn");
+/* USER CODE BEGIN BSP_PWR_VBUSIsOn */
+  uint8_t state = 0;
+
+  (void)BSP_USBPD_PWR_VBUSIsOn(PortId, &state);
+
+  return state;
+/* USER CODE END BSP_PWR_VBUSIsOn */
+}
+
+/**
+  * @brief  Get actual VCONN status.
+  * @note   Obsolete interface, new interface should be called.
+  * @param  PortId Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_PORT_1
+  *         @arg TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg TYPE_C_CC1
+  *         @arg TYPE_C_CC2
+  * @retval VCONN status (1: On, 0: Off)
+  */
+__weak uint8_t BSP_PWR_VCONNIsOn(uint32_t PortId,
+                          uint32_t CCPinId)
+{
+  PWR_DEBUG_TRACE(PortId, "ADVICE: Obsolete BSP_PWR_VCONNIsOn");
+/* USER CODE BEGIN BSP_PWR_VCONNIsOn */
+  uint8_t state = 0;
+
+  (void)BSP_USBPD_PWR_VCONNIsOn(PortId, CCPinId, &state);
+
+  return state;
+/* USER CODE END BSP_PWR_VCONNIsOn */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup POWER_Exported_Functions2
+  * @{
+  */
+
+/**
+  * @brief  Global initialization of PWR resource used by USB-PD
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_Init(uint32_t Instance)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_Init */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_NONE;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_Init */
+}
+
+/**
+  * @brief  Global de-initialization of PWR resource used by USB-PD
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_Deinit(uint32_t Instance)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_Deinit */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_NONE;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_Deinit */
+}
+
+/**
+  * @brief  Initialize the hardware resources used by the Type-C power delivery (PD)
+  *         controller.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSInit(uint32_t Instance)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSInit */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_NONE;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  else
+  {
+    /* !!!
+      BSP_PWR_VBUSInit is obsolete. You may need to move your user code
+      inside this function
+    !!! */
+    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSInit");
+  }
+
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSInit */
+}
+
+/**
+  * @brief  Release the hardware resources used by the Type-C power delivery (PD)
+  *         controller.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSDeInit(uint32_t Instance)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSDeInit */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VBUSDeInit is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSDeInit");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSDeInit */
+}
+
+/**
+  * @brief  Enable power supply over VBUS.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSOn(uint32_t Instance)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSOn */
+  /* Check if instance is valid       */
+  int32_t ret;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  else
+  {
+    ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+    /* !!!
+        BSP_PWR_VBUSOn is obsolete. You may need to move your user code
+        inside this function
+     !!! */
+    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSOn");
+  }
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSOn */
+}
+
+/**
+  * @brief  Disable power supply over VBUS.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSOff(uint32_t Instance)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSOff */
+  /* Check if instance is valid       */
+  int32_t ret;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  else
+  {
+    ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+    /* !!!
+        BSP_PWR_VBUSOff is obsolete. You may need to move your user code
+        inside this function
+     !!! */
+    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSOff");
+  }
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSOff */
+}
+
+/**
+  * @brief  Set a fixed/variable PDO and manage the power control.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  VbusTargetInmv the vbus Target (in mV)
+  * @param  OperatingCurrent the Operating Current (in mA)
+  * @param  MaxOperatingCurrent the Max Operating Current (in mA)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_Fixed(uint32_t Instance,
+                                           uint32_t VbusTargetInmv,
+                                           uint32_t OperatingCurrent,
+                                           uint32_t MaxOperatingCurrent)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Fixed */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_NONE;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VBUSSetVoltage_Fixed is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSSetVoltage_Fixed");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_Fixed */
+}
+
+/**
+  * @brief  Set a fixed/variable PDO and manage the power control.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  VbusTargetMinInmv the vbus Target min (in mV)
+  * @param  VbusTargetMaxInmv the vbus Target max (in mV)
+  * @param  OperatingCurrent the Operating Current (in mA)
+  * @param  MaxOperatingCurrent the Max Operating Current (in mA)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_Variable(uint32_t Instance,
+                                              uint32_t VbusTargetMinInmv,
+                                              uint32_t VbusTargetMaxInmv,
+                                              uint32_t OperatingCurrent,
+                                              uint32_t MaxOperatingCurrent)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Variable */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VBUSSetVoltage_Variable is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSSetVoltage_Variable");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_Variable */
+}
+
+/**
+  * @brief  Set a Battery PDO and manage the power control.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  VbusTargetMin the vbus Target min (in mV)
+  * @param  VbusTargetMax the vbus Target max (in mV)
+  * @param  OperatingPower the Operating Power (in mW)
+  * @param  MaxOperatingPower the Max Operating Power (in mW)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_Battery(uint32_t Instance,
+                                             uint32_t VbusTargetMin,
+                                             uint32_t VbusTargetMax,
+                                             uint32_t OperatingPower,
+                                             uint32_t MaxOperatingPower)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Battery */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VBUSSetVoltage_Battery is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSSetVoltage_Battery");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_Battery */
+}
+
+/**
+  * @brief  Set a APDO and manage the power control.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  VbusTargetInmv the vbus Target (in mV)
+  * @param  OperatingCurrent the Operating current (in mA)
+  * @param  Delta Delta between with previous APDO (in mV), 0 means APDO start
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_APDO(uint32_t Instance,
+                                          uint32_t VbusTargetInmv,
+                                          uint32_t OperatingCurrent,
+                                          int32_t Delta)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_APDO */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VBUSSetVoltage_APDO is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSSetVoltage_APDO");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_APDO */
+}
+
+/**
+  * @brief  Get actual voltage level measured on the VBUS line.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  pVoltage Pointer on measured voltage level (in mV)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSGetVoltage(uint32_t Instance, uint32_t *pVoltage)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSGetVoltage */
+
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_NONE;
+
+  if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pVoltage))
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  *pVoltage = 0u;
+  /* !!!
+      BSP_PWR_VBUSGetVoltage is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSGetVoltage");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSGetVoltage */
+}
+
+/**
+  * @brief  Get actual current level measured on the VBUS line.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  pCurrent Pointer on measured current level (in mA)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSGetCurrent(uint32_t Instance, int32_t *pCurrent)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSGetCurrent */
+  /* Check if instance is valid       */
+  int32_t ret;
+
+  if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pCurrent))
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  else
+  {
+    *pCurrent = 0;
+    ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+  }
+  /* !!!
+      BSP_PWR_VBUSGetCurrent is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSGetCurrent");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSGetCurrent */
+}
+
+/**
+  * @brief  Initialize VCONN sourcing.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_CC1
+  *         @arg @ref USBPD_PWR_TYPE_C_CC2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VCONNInit(uint32_t Instance,
+                                uint32_t CCPinId)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNInit */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VCONNInit is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VCONNInit");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VCONNInit */
+}
+
+/**
+  * @brief  Un-Initialize VCONN sourcing.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_CC1
+  *         @arg @ref USBPD_PWR_TYPE_C_CC2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VCONNDeInit(uint32_t Instance,
+                                  uint32_t CCPinId)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNDeInit */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VCONNDeInit is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VCONNDeInit");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VCONNDeInit */
+}
+
+/**
+  * @brief  Enable VCONN sourcing.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_CC1
+  *         @arg @ref USBPD_PWR_TYPE_C_CC2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VCONNOn(uint32_t Instance,
+                              uint32_t CCPinId)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNOn */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VCONNOn is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VCONNOn");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VCONNOn */
+}
+
+/**
+  * @brief  Disable VCONN sourcing.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  CCPinId CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_CC1
+  *         @arg @ref USBPD_PWR_TYPE_C_CC2
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VCONNOff(uint32_t Instance,
+                               uint32_t CCPinId)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNOff */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_VCONNOff is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VCONNOff");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VCONNOff */
+}
+
+/**
+  * @brief  Get actual VCONN status.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  CCPinId Type-C CC pin identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_CC1
+  *         @arg @ref USBPD_PWR_TYPE_C_CC2
+  * @param  pState VCONN status (1: On, 0: Off)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VCONNIsOn(uint32_t Instance,
+                                uint32_t CCPinId, uint8_t *pState)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNIsOn */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  *pState = 0u;
+  /* !!!
+      BSP_PWR_VCONNIsOn is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VCONNIsOn");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VCONNIsOn */
+}
+
+/**
+  * @brief  Set the VBUS disconnection voltage threshold.
+  * @note   Callback function registered through BSP_USBPD_PWR_RegisterVBUSDetectCallback
+  *         function call is invoked when VBUS falls below programmed threshold.
+  * @note   By default VBUS disconnection threshold is set to 3.3V
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  VoltageThreshold VBUS disconnection voltage threshold (in mV)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_SetVBUSDisconnectionThreshold(uint32_t Instance,
+                                                    uint32_t VoltageThreshold)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_SetVBUSDisconnectionThreshold */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_SetVBUSDisconnectionThreshold is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_SetVBUSDisconnectionThreshold");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_SetVBUSDisconnectionThreshold */
+}
+
+/**
+  * @brief  Register USB Type-C Current callback function.
+  * @note   Callback function invoked when VBUS rises above 4V (VBUS present) or
+  *         when VBUS falls below programmed threshold (VBUS absent).
+  * @note   Callback function is un-registered when callback function pointer
+  *         argument is NULL.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  pfnVBUSDetectCallback callback function pointer
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_RegisterVBUSDetectCallback(uint32_t  Instance,
+                                                 USBPD_PWR_VBUSDetectCallbackFunc *pfnVBUSDetectCallback)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_RegisterVBUSDetectCallback */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  /* !!!
+      BSP_PWR_RegisterVBUSDetectCallback is obsolete. You may need to move your user code
+      inside this function
+   !!! */
+  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_RegisterVBUSDetectCallback");
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_RegisterVBUSDetectCallback */
+}
+
+/**
+  * @brief  Get actual VBUS status.
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  pState VBUS status (1: On, 0: Off)
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VBUSIsOn(uint32_t Instance, uint8_t *pState)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSIsOn */
+  /* Check if instance is valid       */
+  int32_t ret;
+
+  if (Instance >= USBPD_PWR_INSTANCES_NBR)
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  else
+  {
+    ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+    /* !!!
+        BSP_PWR_VBUSIsOn is obsolete. You may need to move your user code
+        inside this function
+     !!! */
+    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSIsOn");
+  }
+  *pState = 0u;
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VBUSIsOn */
+}
+
+/**
+  * @brief  Set state of VCC (specific functions)
+  * @param  Instance Type-C port identifier
+  *         This parameter can be take one of the following values:
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
+  *         @arg @ref USBPD_PWR_TYPE_C_PORT_2
+  * @param  State VCC state
+  * @retval BSP status
+  */
+__weak int32_t BSP_USBPD_PWR_VCCSetState(uint32_t Instance, uint32_t State)
+{
+  /* USER CODE BEGIN BSP_USBPD_PWR_VCCSetState */
+  /* Check if instance is valid       */
+  int32_t ret = BSP_ERROR_NONE;
+
+  if ((Instance != USBPD_PWR_TYPE_C_PORT_1) && (Instance != USBPD_PWR_TYPE_C_PORT_2))
+  {
+    ret = BSP_ERROR_WRONG_PARAM;
+  }
+  else
+  {
+    ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
+    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VCCSetState");
+  }
+  return ret;
+  /* USER CODE END BSP_USBPD_PWR_VCCSetState */
+}
+/**
+  * @}
+  */
+
+/** @addtogroup POWER_Private_Functions
+  * @{
+  */
+
+/* USER CODE BEGIN POWER_Private_Functions */
+
+/* USER CODE END POWER_Private_Functions */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/USB-PD_Provider_1port/Src/usbpd_vdm_user.c b/USB-PD_Provider_1port/Src/usbpd_vdm_user.c
new file mode 100644
index 0000000..122e0f0
--- /dev/null
+++ b/USB-PD_Provider_1port/Src/usbpd_vdm_user.c
@@ -0,0 +1,475 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usbpd_vdm_user.c
+  * @author  MCD Application Team
+  * @brief   USBPD provider demo file
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbpd_core.h"
+#include "usbpd_dpm_conf.h"
+#include "usbpd_vdm_user.h"
+#include "usbpd_dpm_user.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/** @addtogroup STM32_USBPD_APPLICATION
+  * @{
+  */
+
+/** @addtogroup STM32_USBPD_APPLICATION_VDM_USER
+  * @{
+  */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Private_define */
+
+/* USER CODE END Private_define */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN Private_typedef */
+
+/* USER CODE END Private_typedef */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Private_macro */
+
+/* USER CODE END Private_macro */
+
+/* Private function prototypes -----------------------------------------------*/
+static USBPD_StatusTypeDef USBPD_VDM_DiscoverIdentity(uint8_t PortNum, USBPD_DiscoveryIdentity_TypeDef *pIdentity);
+static USBPD_StatusTypeDef USBPD_VDM_DiscoverSVIDs(uint8_t PortNum, uint16_t **p_SVID_Info, uint8_t *nb);
+static USBPD_StatusTypeDef USBPD_VDM_DiscoverModes(uint8_t PortNum, uint16_t SVID, uint32_t **p_ModeInfo, uint8_t *nbMode);
+static USBPD_StatusTypeDef USBPD_VDM_ModeEnter(uint8_t PortNum, uint16_t SVID, uint32_t ModeIndex);
+static USBPD_StatusTypeDef USBPD_VDM_ModeExit(uint8_t PortNum, uint16_t SVID, uint32_t ModeIndex);
+static void USBPD_VDM_SendAttention(uint8_t PortNum, uint8_t *NbData, uint32_t *VDO);
+static void USBPD_VDM_ReceiveAttention(uint8_t PortNum, uint8_t NbData, uint32_t VDO);
+static USBPD_StatusTypeDef USBPD_VDM_ReceiveSpecific(uint8_t PortNum, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *NbData, uint32_t *VDO);
+static void USBPD_VDM_InformIdentity(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_DiscoveryIdentity_TypeDef *pIdentity);
+static void USBPD_VDM_InformSVID(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_SVIDInfo_TypeDef *pListSVID);
+static void USBPD_VDM_InformMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_ModeInfo_TypeDef *pModesInfo);
+static void USBPD_VDM_InformModeEnter(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, uint16_t SVID, uint32_t ModeIndex);
+static void USBPD_VDM_InformModeExit(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, uint16_t SVID, uint32_t ModeIndex);
+static void USBPD_VDM_InformSpecific(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *NbData, uint32_t *VDO);
+static void USBPD_VDM_SendSpecific(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *NbData, uint32_t *VDO);
+static void USBPD_VDM_SendUVDM(uint8_t PortNum, USBPD_UVDMHeader_TypeDef *pUVDM_Header, uint8_t *pNbData, uint32_t *pVDO);
+static USBPD_StatusTypeDef USBPD_VDM_ReceiveUVDM(uint8_t PortNum, USBPD_UVDMHeader_TypeDef UVDM_Header, uint8_t *pNbData, uint32_t *pVDO);
+
+/* USER CODE BEGIN Private_prototypes */
+
+/* USER CODE END Private_prototypes */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN Private_variables */
+const USBPD_VDM_Callbacks vdmCallbacks =
+{
+  USBPD_VDM_DiscoverIdentity,
+  USBPD_VDM_DiscoverSVIDs,
+  USBPD_VDM_DiscoverModes,
+  USBPD_VDM_ModeEnter,
+  USBPD_VDM_ModeExit,
+  USBPD_VDM_InformIdentity,
+  USBPD_VDM_InformSVID,
+  USBPD_VDM_InformMode,
+  USBPD_VDM_InformModeEnter,
+  USBPD_VDM_InformModeExit,
+  USBPD_VDM_SendAttention,
+  USBPD_VDM_ReceiveAttention,
+  USBPD_VDM_SendSpecific,
+  USBPD_VDM_ReceiveSpecific,
+  USBPD_VDM_InformSpecific,
+  USBPD_VDM_SendUVDM,
+  USBPD_VDM_ReceiveUVDM,
+};
+/* USER CODE END Private_variables */
+
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @brief  VDM Discovery identity callback
+  * @note   Function is called to get Discovery identity information linked to the device and answer
+  *         to SVDM Discovery identity init message sent by port partner
+  * @param  PortNum current port number
+  * @param  pIdentity Pointer on @ref USBPD_DiscoveryIdentity_TypeDef structure
+  * @retval USBPD status: @ref USBPD_ACK or @ref USBPD_BUSY
+  */
+static USBPD_StatusTypeDef USBPD_VDM_DiscoverIdentity(uint8_t PortNum, USBPD_DiscoveryIdentity_TypeDef *pIdentity)
+{
+/* USER CODE BEGIN USBPD_VDM_DiscoverIdentity */
+  return USBPD_NAK;
+/* USER CODE END USBPD_VDM_DiscoverIdentity */
+}
+
+/**
+  * @brief  VDM Discover SVID callback
+  * @note   Function is called to retrieve SVID supported by device and answer
+  *         to SVDM Discovery SVID init message sent by port partner
+  * @param  PortNum        current port number
+  * @param  p_SVID_Info Pointer on @ref USBPD_SVIDInfo_TypeDef structure
+  * @param  pNbSVID     Pointer on number of SVID
+  * @retval USBPD status  @ref USBPD_BUSY or @ref USBPD_ACK or @ref USBPD_NAK
+  */
+static USBPD_StatusTypeDef USBPD_VDM_DiscoverSVIDs(uint8_t PortNum, uint16_t **p_SVID_Info, uint8_t *pNbSVID)
+{
+/* USER CODE BEGIN USBPD_VDM_DiscoverSVIDs */
+  return USBPD_NAK;
+/* USER CODE END USBPD_VDM_DiscoverSVIDs */
+}
+
+/**
+  * @brief  VDM Discover Mode callback (report all the modes supported by SVID)
+  * @note   Function is called to report all the modes supported by selected SVID and answer
+  *         to SVDM Discovery Mode init message sent by port partner
+  * @param  PortNum current port number
+  * @param  SVID         SVID value
+  * @param  p_ModeTab    Pointer on the mode value
+  * @param  NumberOfMode Number of mode available
+  * @retval USBPD status
+  */
+static USBPD_StatusTypeDef USBPD_VDM_DiscoverModes(uint8_t PortNum, uint16_t SVID, uint32_t **p_ModeTab, uint8_t *NumberOfMode)
+{
+/* USER CODE BEGIN USBPD_VDM_DiscoverModes */
+  return USBPD_NAK;
+/* USER CODE END USBPD_VDM_DiscoverModes */
+}
+
+/**
+  * @brief  VDM Mode enter callback
+  * @note   Function is called to check if device can enter in the mode received for the selected SVID in the
+  *         SVDM enter mode init message sent by port partner
+  * @param  PortNum current port number
+  * @param  SVID      SVID value
+  * @param  ModeIndex Index of the mode to be entered
+  * @retval USBPD status @ref USBPD_ACK/@ref USBPD_NAK
+  */
+static USBPD_StatusTypeDef USBPD_VDM_ModeEnter(uint8_t PortNum, uint16_t SVID, uint32_t ModeIndex)
+{
+/* USER CODE BEGIN USBPD_VDM_ModeEnter */
+  return USBPD_NAK;
+/* USER CODE END USBPD_VDM_ModeEnter */
+}
+
+/**
+  * @brief  VDM Mode exit callback
+  * @note   Function is called to check if device can exit from the mode received for the selected SVID in the
+  *         SVDM exit mode init message sent by port partner
+  * @param  PortNum current port number
+  * @param  SVID      SVID value
+  * @param  ModeIndex Index of the mode to be exited
+  * @retval USBPD status @ref USBPD_ACK/@ref USBPD_NAK
+  */
+static USBPD_StatusTypeDef USBPD_VDM_ModeExit(uint8_t PortNum, uint16_t SVID, uint32_t ModeIndex)
+{
+/* USER CODE BEGIN USBPD_VDM_ModeExit */
+  return USBPD_NAK;
+/* USER CODE END USBPD_VDM_ModeExit */
+}
+
+/**
+  * @brief  Send VDM Attention message callback
+  * @note   Function is called when device wants to send a SVDM attention message to port partner
+  *         (for instance DP status can be filled through this function)
+  * @param  PortNum    current port number
+  * @param  pNbData    Pointer of number of VDO to send
+  * @param  pVDO       Pointer of VDO to send
+  * @retval None
+  */
+static void USBPD_VDM_SendAttention(uint8_t PortNum, uint8_t *pNbData, uint32_t *pVDO)
+{
+/* USER CODE BEGIN USBPD_VDM_SendAttention */
+
+/* USER CODE END USBPD_VDM_SendAttention */
+}
+
+/**
+  * @brief  Receive VDM Attention callback
+  * @note   Function is called when a SVDM attention init message has been received from port partner
+  *         (for instance, save DP status data through this function)
+  * @param  PortNum   current port number
+  * @param  NbData    Number of received VDO
+  * @param  VDO       Received VDO
+  * @retval None
+  */
+static void USBPD_VDM_ReceiveAttention(uint8_t PortNum, uint8_t NbData, uint32_t VDO)
+{
+/* USER CODE BEGIN USBPD_VDM_ReceiveAttention */
+
+/* USER CODE END USBPD_VDM_ReceiveAttention */
+}
+
+/**
+  * @brief  VDM Receive Specific message callback
+  * @note   Function is called to answer to a SVDM specific init message received by port partner.
+  *         (for instance, retrieve DP status or DP configure data through this function)
+  * @param  PortNum     Current port number
+  * @param  VDMCommand  VDM command based on @ref USBPD_VDM_Command_Typedef
+  * @param  pNbData     Pointer of number of received VDO and used for the answer
+  * @param  pVDO        Pointer of received VDO and use for the answer
+  * @retval USBPD Status
+  */
+static USBPD_StatusTypeDef USBPD_VDM_ReceiveSpecific(uint8_t PortNum, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *pNbData, uint32_t *pVDO)
+{
+/* USER CODE BEGIN USBPD_VDM_ReceiveSpecific */
+  return USBPD_NAK;
+/* USER CODE END USBPD_VDM_ReceiveSpecific */
+}
+
+/**
+  * @brief  Inform identity callback
+  * @note   Function is called to save Identity information received in Discovery identity from port partner
+            (answer to SVDM discovery identity sent by device)
+  * @param  PortNum       current port number
+  * @param  SOPType       SOP type
+  * @param  CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef
+  * @param  pIdentity     Pointer on the discovery identity information based on @ref USBPD_DiscoveryIdentity_TypeDef
+  * @retval None
+*/
+static void USBPD_VDM_InformIdentity(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_DiscoveryIdentity_TypeDef *pIdentity)
+{
+/* USER CODE BEGIN USBPD_VDM_InformIdentity */
+  switch(CommandStatus)
+  {
+  case SVDM_RESPONDER_ACK :
+    break;
+  case SVDM_RESPONDER_NAK :
+    break;
+  case SVDM_RESPONDER_BUSY :
+    break;
+  default :
+    break;
+  }
+/* USER CODE END USBPD_VDM_InformIdentity */
+}
+
+/**
+  * @brief  Inform SVID callback
+  * @note   Function is called to save list of SVID received in Discovery SVID from port partner
+            (answer to SVDM discovery SVID sent by device)
+  * @param  PortNum       current port number
+  * @param  SOPType       SOP type
+  * @param  CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef
+  * @param  pListSVID     Pointer of list of SVID based on @ref USBPD_SVIDInfo_TypeDef
+  * @retval None
+  */
+static void USBPD_VDM_InformSVID(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_SVIDInfo_TypeDef *pListSVID)
+{
+/* USER CODE BEGIN USBPD_VDM_InformSVID */
+  switch(CommandStatus)
+  {
+  case SVDM_RESPONDER_ACK :
+    break;
+  case SVDM_RESPONDER_NAK :
+    break;
+  case SVDM_RESPONDER_BUSY :
+    break;
+  default :
+      break;
+  }
+/* USER CODE END USBPD_VDM_InformSVID */
+}
+
+/**
+  * @brief  Inform Mode callback ( received in Discovery Modes ACK)
+  * @note   Function is called to save list of modes linked to SVID received in Discovery mode from port partner
+            (answer to SVDM discovery mode sent by device)
+  * @param  PortNum         current port number
+  * @param  SOPType         SOP type
+  * @param  CommandStatus   Command status based on @ref USBPD_VDM_CommandType_Typedef
+  * @param  pModesInfo      Pointer of Modes info based on @ref USBPD_ModeInfo_TypeDef
+  * @retval None
+  */
+static void USBPD_VDM_InformMode(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, USBPD_ModeInfo_TypeDef *pModesInfo)
+{
+/* USER CODE BEGIN USBPD_VDM_InformMode */
+  switch(CommandStatus)
+  {
+  case SVDM_RESPONDER_ACK :
+    break;
+  case SVDM_RESPONDER_NAK :
+    break;
+  case SVDM_RESPONDER_BUSY :
+    break;
+  default :
+    break;
+  }
+/* USER CODE END USBPD_VDM_InformMode */
+}
+
+/**
+  * @brief  Inform Mode enter callback
+  * @note   Function is called to inform if port partner accepted or not to enter in the mode
+  *         specified in the SVDM enter mode sent by the device
+  * @param  PortNum   current port number
+  * @param  SOPType       SOP type
+  * @param  CommandStatus Command status based on @ref USBPD_VDM_CommandType_Typedef
+  * @param  SVID      SVID ID
+  * @param  ModeIndex Index of the mode to be entered
+  * @retval None
+  */
+static void USBPD_VDM_InformModeEnter(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, uint16_t SVID, uint32_t ModeIndex)
+{
+/* USER CODE BEGIN USBPD_VDM_InformModeEnter */
+  switch(CommandStatus)
+  {
+  case SVDM_RESPONDER_ACK :
+    break;
+  case SVDM_RESPONDER_NAK :
+    break;
+  case SVDM_RESPONDER_BUSY :
+    /* retry in 50ms */
+    break;
+  default :
+    break;
+  }
+/* USER CODE END USBPD_VDM_InformModeEnter */
+}
+
+/**
+  * @brief  Inform Exit enter callback
+  * @param  PortNum   current port number
+  * @param  SVID      SVID ID
+  * @param  ModeIndex Index of the mode to be entered
+  * @retval None
+  */
+static void USBPD_VDM_InformModeExit(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_CommandType_Typedef CommandStatus, uint16_t SVID, uint32_t ModeIndex)
+{
+/* USER CODE BEGIN USBPD_VDM_InformModeExit */
+  switch(CommandStatus)
+  {
+  case SVDM_RESPONDER_ACK :
+    break;
+  case SVDM_RESPONDER_NAK :
+    break;
+  case SVDM_RESPONDER_BUSY :
+    /* retry in 50ms */
+    break;
+  default :
+    break;
+  }
+/* USER CODE END USBPD_VDM_InformModeExit */
+}
+
+/**
+  * @brief  VDM Send Specific message callback
+  * @note   Function is called when device wants to send a SVDM specific init message to port partner
+  *         (for instance DP status or DP configure can be filled through this function)
+  * @param  PortNum    current port number
+  * @param  SOPType    SOP type
+  * @param  VDMCommand VDM command based on @ref USBPD_VDM_Command_Typedef
+  * @param  pNbData    Pointer of number of VDO to send
+  * @param  pVDO       Pointer of VDO to send
+  * @retval None
+  */
+static void USBPD_VDM_SendSpecific(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *pNbData, uint32_t *pVDO)
+{
+/* USER CODE BEGIN USBPD_VDM_SendSpecific */
+
+/* USER CODE END USBPD_VDM_SendSpecific */
+}
+
+/**
+  * @brief  VDM Specific message callback to inform user of reception of VDM specific message
+  * @note   Function is called when answer from SVDM specific init message has been received by the device
+  *         (for instance, save DP status and DP configure data through this function)
+  * @param  PortNum    current port number
+  * @param  SOPType    SOP type
+  * @param  VDMCommand VDM command based on @ref USBPD_VDM_Command_Typedef
+  * @param  pNbData    Pointer of number of received VDO
+  * @param  pVDO       Pointer of received VDO
+  * @retval None
+  */
+static void USBPD_VDM_InformSpecific(uint8_t PortNum, USBPD_SOPType_TypeDef SOPType, USBPD_VDM_Command_Typedef VDMCommand, uint8_t *pNbData, uint32_t *pVDO)
+{
+/* USER CODE BEGIN USBPD_VDM_InformSpecific */
+
+/* USER CODE END USBPD_VDM_InformSpecific */
+}
+
+/**
+  * @brief  VDM Send Unstructured message callback
+  * @param  PortNum    current port number
+  * @param  pUVDM_Header  Pointer on UVDM header based on @ref USBPD_UVDMHeader_TypeDef
+  * @param  pNbData       Pointer of number of VDO to send
+  * @param  pVDO          Pointer of VDO to send
+  * @retval None
+  */
+static void USBPD_VDM_SendUVDM(uint8_t PortNum, USBPD_UVDMHeader_TypeDef *pUVDM_Header, uint8_t *pNbData, uint32_t *pVDO)
+{
+/* USER CODE BEGIN USBPD_VDM_SendUVDM */
+
+/* USER CODE END USBPD_VDM_SendUVDM */
+}
+
+/**
+  * @brief  Unstructured VDM  message callback to inform user of reception of UVDM message
+  * @param  PortNum    current port number
+  * @param  UVDM_Header UVDM header based on @ref USBPD_UVDMHeader_TypeDef
+  * @param  pNbData    Pointer of number of received VDO
+  * @param  pVDO       Pointer of received VDO
+  * @retval USBPD Status
+  */
+static USBPD_StatusTypeDef USBPD_VDM_ReceiveUVDM(uint8_t PortNum, USBPD_UVDMHeader_TypeDef UVDM_Header, uint8_t *pNbData, uint32_t *pVDO)
+{
+/* USER CODE BEGIN USBPD_VDM_ReceiveUVDM */
+  return USBPD_ERROR;
+/* USER CODE END USBPD_VDM_ReceiveUVDM */
+}
+
+/* USER CODE BEGIN Private_functions */
+
+/* USER CODE END Private_functions */
+
+/* Exported functions ---------------------------------------------------------*/
+/**
+  * @brief  VDM Initialization function
+  * @param  PortNum     Index of current used port
+  * @retval status
+  */
+USBPD_StatusTypeDef USBPD_VDM_UserInit(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_VDM_UserInit */
+    return USBPD_OK;
+/* USER CODE END USBPD_VDM_UserInit */
+}
+
+/**
+  * @brief  VDM Reset function
+  * @param  PortNum     Index of current used port
+  * @retval status
+  */
+void USBPD_VDM_UserReset(uint8_t PortNum)
+{
+/* USER CODE BEGIN USBPD_VDM_UserReset */
+
+/* USER CODE END USBPD_VDM_UserReset */
+}
+
+/* USER CODE BEGIN Exported_functions */
+
+/* USER CODE END Exported_functions */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/USB-PD_Provider_1port/USB-PD_Provider_1port.ioc b/USB-PD_Provider_1port/USB-PD_Provider_1port.ioc
new file mode 100644
index 0000000..525ede0
--- /dev/null
+++ b/USB-PD_Provider_1port/USB-PD_Provider_1port.ioc
@@ -0,0 +1,311 @@
+#MicroXplorer Configuration settings - do not modify
+ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_11
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master,SelectedChannel
+ADC1.NbrOfConversionFlag=1
+ADC1.Rank-0\#ChannelRegularConversion=1
+ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
+ADC1.SelectedChannel=ADC_CHANNEL_3|ADC_CHANNEL_11
+ADC1.master=1
+Dma.ADC1.3.Direction=DMA_PERIPH_TO_MEMORY
+Dma.ADC1.3.EventEnable=DISABLE
+Dma.ADC1.3.Instance=DMA1_Channel1
+Dma.ADC1.3.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
+Dma.ADC1.3.MemInc=DMA_MINC_ENABLE
+Dma.ADC1.3.Mode=DMA_NORMAL
+Dma.ADC1.3.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
+Dma.ADC1.3.PeriphInc=DMA_PINC_DISABLE
+Dma.ADC1.3.Polarity=HAL_DMAMUX_REQ_GEN_RISING
+Dma.ADC1.3.Priority=DMA_PRIORITY_LOW
+Dma.ADC1.3.RequestNumber=1
+Dma.ADC1.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
+Dma.ADC1.3.SignalID=NONE
+Dma.ADC1.3.SyncEnable=DISABLE
+Dma.ADC1.3.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
+Dma.ADC1.3.SyncRequestNumber=1
+Dma.ADC1.3.SyncSignalID=NONE
+Dma.Request0=UCPD1_RX
+Dma.Request1=UCPD1_TX
+Dma.Request2=USART3_TX
+Dma.Request3=ADC1
+Dma.RequestsNb=4
+Dma.UCPD1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.UCPD1_RX.0.EventEnable=DISABLE
+Dma.UCPD1_RX.0.Instance=DMA1_Channel4
+Dma.UCPD1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.UCPD1_RX.0.MemInc=DMA_MINC_ENABLE
+Dma.UCPD1_RX.0.Mode=DMA_NORMAL
+Dma.UCPD1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.UCPD1_RX.0.PeriphInc=DMA_PINC_DISABLE
+Dma.UCPD1_RX.0.Polarity=HAL_DMAMUX_REQ_GEN_RISING
+Dma.UCPD1_RX.0.Priority=DMA_PRIORITY_LOW
+Dma.UCPD1_RX.0.RequestNumber=1
+Dma.UCPD1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
+Dma.UCPD1_RX.0.SignalID=NONE
+Dma.UCPD1_RX.0.SyncEnable=DISABLE
+Dma.UCPD1_RX.0.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
+Dma.UCPD1_RX.0.SyncRequestNumber=1
+Dma.UCPD1_RX.0.SyncSignalID=NONE
+Dma.UCPD1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
+Dma.UCPD1_TX.1.EventEnable=DISABLE
+Dma.UCPD1_TX.1.Instance=DMA1_Channel2
+Dma.UCPD1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.UCPD1_TX.1.MemInc=DMA_MINC_ENABLE
+Dma.UCPD1_TX.1.Mode=DMA_NORMAL
+Dma.UCPD1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.UCPD1_TX.1.PeriphInc=DMA_PINC_DISABLE
+Dma.UCPD1_TX.1.Polarity=HAL_DMAMUX_REQ_GEN_RISING
+Dma.UCPD1_TX.1.Priority=DMA_PRIORITY_LOW
+Dma.UCPD1_TX.1.RequestNumber=1
+Dma.UCPD1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
+Dma.UCPD1_TX.1.SignalID=NONE
+Dma.UCPD1_TX.1.SyncEnable=DISABLE
+Dma.UCPD1_TX.1.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
+Dma.UCPD1_TX.1.SyncRequestNumber=1
+Dma.UCPD1_TX.1.SyncSignalID=NONE
+Dma.USART3_TX.2.Direction=DMA_MEMORY_TO_PERIPH
+Dma.USART3_TX.2.EventEnable=DISABLE
+Dma.USART3_TX.2.Instance=DMA1_Channel7
+Dma.USART3_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.USART3_TX.2.MemInc=DMA_MINC_ENABLE
+Dma.USART3_TX.2.Mode=DMA_NORMAL
+Dma.USART3_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.USART3_TX.2.PeriphInc=DMA_PINC_DISABLE
+Dma.USART3_TX.2.Polarity=HAL_DMAMUX_REQ_GEN_RISING
+Dma.USART3_TX.2.Priority=DMA_PRIORITY_LOW
+Dma.USART3_TX.2.RequestNumber=1
+Dma.USART3_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber
+Dma.USART3_TX.2.SignalID=NONE
+Dma.USART3_TX.2.SyncEnable=DISABLE
+Dma.USART3_TX.2.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT
+Dma.USART3_TX.2.SyncRequestNumber=1
+Dma.USART3_TX.2.SyncSignalID=NONE
+FREERTOS.IPParameters=Tasks01,configTOTAL_HEAP_SIZE
+FREERTOS.Tasks01=defaultTask,0,128,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL
+FREERTOS.configTOTAL_HEAP_SIZE=5000
+File.Version=6
+GPIO.groupedBy=
+GUI_INTERFACE.HWBoardVersionName=STM32G0C1E-EV
+GUI_INTERFACE.IPParameters=HWBoardVersionName,PDTypeName
+GUI_INTERFACE.PDTypeName=MB1581B
+KeepUserPlacement=false
+Mcu.Family=STM32G0
+Mcu.IP0=ADC1
+Mcu.IP1=DMA
+Mcu.IP10=USART3
+Mcu.IP11=USBPD
+Mcu.IP2=FREERTOS
+Mcu.IP3=GUI_INTERFACE
+Mcu.IP4=LPTIM1
+Mcu.IP5=NVIC
+Mcu.IP6=RCC
+Mcu.IP7=SYS
+Mcu.IP8=TRACER_EMB
+Mcu.IP9=UCPD1
+Mcu.IPNb=12
+Mcu.Name=STM32G0C1V(C-E)Tx
+Mcu.Package=LQFP100
+Mcu.Pin0=PB9
+Mcu.Pin1=PC10
+Mcu.Pin10=PB14
+Mcu.Pin11=PB15
+Mcu.Pin12=PA8
+Mcu.Pin13=PA9
+Mcu.Pin14=PA10
+Mcu.Pin15=PD3
+Mcu.Pin16=PD4
+Mcu.Pin17=VP_FREERTOS_VS_CMSIS_V1
+Mcu.Pin18=VP_GUI_INTERFACE_VS_gui_interface
+Mcu.Pin19=VP_LPTIM1_VS_COMP1_LPTIM
+Mcu.Pin2=PC11
+Mcu.Pin20=VP_SYS_VS_Systick
+Mcu.Pin21=VP_SYS_VS_DBSignals
+Mcu.Pin22=VP_TRACER_EMB_VS_traceremb_usart3
+Mcu.Pin23=VP_USBPD_VS_USBPD1
+Mcu.Pin24=VP_USBPD_VS_PD3FULL
+Mcu.Pin25=VP_USBPD_VS_usbpd_tim1
+Mcu.Pin26=VP_USBPD_VS_usbpd_traceremb
+Mcu.Pin3=PC2
+Mcu.Pin4=PA3
+Mcu.Pin5=PB0
+Mcu.Pin6=PB10
+Mcu.Pin7=PB11
+Mcu.Pin8=PB12
+Mcu.Pin9=PB13
+Mcu.PinsNb=27
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=USBPD_FW_VERSION,0x16092020
+Mcu.UserName=STM32G0C1VETx
+MxCube.Version=6.1.0
+MxDb.Version=DB.6.0.10
+NVIC.ADC1_COMP_IRQn=true\:3\:0\:false\:false\:true\:false\:true\:true
+NVIC.DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn=true\:3\:0\:false\:false\:true\:true\:false\:true
+NVIC.DMA1_Channel1_IRQn=true\:3\:0\:false\:false\:true\:true\:false\:true
+NVIC.DMA1_Channel2_3_IRQn=true\:3\:0\:false\:false\:true\:true\:false\:true
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PendSV_IRQn=true\:3\:0\:false\:false\:false\:false\:false\:false
+NVIC.SVC_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
+NVIC.SavedPendsvIrqHandlerGenerated=true
+NVIC.SavedSvcallIrqHandlerGenerated=true
+NVIC.SavedSystickIrqHandlerGenerated=true
+NVIC.SysTick_IRQn=true\:3\:0\:false\:false\:true\:false\:false\:true
+NVIC.USART3_4_5_6_LPUART1_IRQn=true\:3\:0\:false\:false\:true\:false\:true\:true
+NVIC.USB_UCPD1_2_IRQn=true\:3\:0\:false\:false\:true\:false\:true\:true
+PA10.Mode=EnableDeadBattery
+PA10.Signal=UCPD1_DBCC2
+PA3.GPIOParameters=GPIO_Label
+PA3.GPIO_Label=VSENSE_2
+PA3.Locked=true
+PA3.Mode=IN3
+PA3.Signal=ADC1_IN3
+PA8.Mode=Source_AllSignals
+PA8.Signal=UCPD1_CC1
+PA9.Mode=EnableDeadBattery
+PA9.Signal=UCPD1_DBCC1
+PB0.GPIOParameters=GPIO_Label
+PB0.GPIO_Label=VCONN_DISCHARGE2
+PB0.Locked=true
+PB0.Signal=GPIO_Output
+PB10.GPIOParameters=GPIO_Label
+PB10.GPIO_Label=VSENSE_1
+PB10.Locked=true
+PB10.Mode=IN11
+PB10.Signal=ADC1_IN11
+PB11.GPIOParameters=GPIO_Label
+PB11.GPIO_Label=VSENSE_DCDC
+PB11.Locked=true
+PB11.Mode=IN15
+PB11.Signal=ADC1_IN15
+PB12.GPIOParameters=GPIO_Label
+PB12.GPIO_Label=ISENSE_2
+PB12.Locked=true
+PB12.Mode=IN16
+PB12.Signal=ADC1_IN16
+PB13.GPIOParameters=GPIO_Label
+PB13.GPIO_Label=VBUS_DISCHARGE1
+PB13.Locked=true
+PB13.Signal=GPIO_Output
+PB14.GPIOParameters=GPIO_Label
+PB14.GPIO_Label=VBUS_DISCHARGE2
+PB14.Locked=true
+PB14.Signal=GPIO_Output
+PB15.Mode=Source_AllSignals
+PB15.Signal=UCPD1_CC2
+PB9.GPIOParameters=GPIO_Label
+PB9.GPIO_Label=VCONN_EN2
+PB9.Locked=true
+PB9.Signal=GPIO_Output
+PC10.Mode=Asynchronous
+PC10.Signal=USART3_TX
+PC11.Mode=Asynchronous
+PC11.Signal=USART3_RX
+PC2.GPIOParameters=GPIO_Label
+PC2.GPIO_Label=V_CTL1
+PC2.Mode=Encoder_mode_occur2
+PC2.Signal=LPTIM1_IN2
+PD3.GPIOParameters=GPIO_Label
+PD3.GPIO_Label=SOURCE_EN
+PD3.Locked=true
+PD3.Signal=GPIO_Output
+PD4.GPIOParameters=GPIO_Label
+PD4.GPIO_Label=VCONN_EN1
+PD4.Locked=true
+PD4.Signal=GPIO_Output
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32G0C1VETx
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0xC00
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=USB-PD_Provider_1port.ioc
+ProjectManager.ProjectName=USB-PD_Provider_1port
+ProjectManager.RegisterCallBack=ADC
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=EWARM V8
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-true-LL-false,2-MX_DMA_Init-DMA-true-LL-false,3-SystemClock_Config-RCC-false-LL-false,4-MX_UCPD1_Init-UCPD1-true-LL-false,5-MX_ADC1_Init-ADC1-true-HAL-false,6-MX_USART3_UART_Init-USART3-true-LL-false,7-MX_GUI_INTERFACE_Init-GUI_INTERFACE-true-HAL-false,8-MX_TRACER_EMB_Init-TRACER_EMB-true-HAL-false,9-MX_USBPD_Init-USBPD-false-HAL-false,10-MX_LPTIM1_Init-LPTIM1-true-HAL-false
+RCC.ADCFreq_Value=64000000
+RCC.AHBFreq_Value=64000000
+RCC.APBFreq_Value=64000000
+RCC.APBTimFreq_Value=64000000
+RCC.CECFreq_Value=32786.88524590164
+RCC.CortexFreq_Value=64000000
+RCC.EXTERNAL_CLOCK_VALUE=48000
+RCC.FCLKCortexFreq_Value=64000000
+RCC.FDCANFreq_Value=64000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=64000000
+RCC.HSE_VALUE=8000000
+RCC.HSI48_VALUE=48000000
+RCC.HSI_VALUE=16000000
+RCC.I2C1Freq_Value=64000000
+RCC.I2C2Freq_Value=64000000
+RCC.I2S1Freq_Value=64000000
+RCC.I2S2Freq_Value=64000000
+RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APBFreq_Value,APBTimFreq_Value,CECFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FDCANFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2S1Freq_Value,I2S2Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LPUART2Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,RNGFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,TIM15Freq_Value,TIM1Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value
+RCC.LPTIM1Freq_Value=64000000
+RCC.LPTIM2Freq_Value=64000000
+RCC.LPUART1Freq_Value=64000000
+RCC.LPUART2Freq_Value=64000000
+RCC.LSCOPinFreq_Value=32000
+RCC.LSE_VALUE=32768
+RCC.LSI_VALUE=32000
+RCC.MCO1PinFreq_Value=64000000
+RCC.MCO2PinFreq_Value=64000000
+RCC.PLLPoutputFreq_Value=64000000
+RCC.PLLQoutputFreq_Value=64000000
+RCC.PLLRCLKFreq_Value=64000000
+RCC.PWRFreq_Value=64000000
+RCC.RNGFreq_Value=2000000
+RCC.SYSCLKFreq_VALUE=64000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TIM15Freq_Value=64000000
+RCC.TIM1Freq_Value=64000000
+RCC.USART1Freq_Value=64000000
+RCC.USART2Freq_Value=64000000
+RCC.USART3Freq_Value=64000000
+RCC.USBFreq_Value=48000000
+RCC.VCOInputFreq_Value=16000000
+RCC.VCOOutputFreq_Value=128000000
+USART3.BaudRate=921600
+USART3.IPParameters=VirtualMode-Asynchronous,BaudRate
+USART3.VirtualMode-Asynchronous=VM_ASYNC
+USBPD.IPParameters=PE_SpecRevision_P0
+USBPD.PE_SpecRevision_P0=USBPD_SPECIFICATION_REV3
+VP_FREERTOS_VS_CMSIS_V1.Mode=CMSIS_V1
+VP_FREERTOS_VS_CMSIS_V1.Signal=FREERTOS_VS_CMSIS_V1
+VP_GUI_INTERFACE_VS_gui_interface.Mode=GUI_INTERFACE
+VP_GUI_INTERFACE_VS_gui_interface.Signal=GUI_INTERFACE_VS_gui_interface
+VP_LPTIM1_VS_COMP1_LPTIM.Mode=Encoder_mode_occur2
+VP_LPTIM1_VS_COMP1_LPTIM.Signal=LPTIM1_VS_COMP1_LPTIM
+VP_SYS_VS_DBSignals.Mode=DisableDeadBatterySignals
+VP_SYS_VS_DBSignals.Signal=SYS_VS_DBSignals
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TRACER_EMB_VS_traceremb_usart3.Mode=TRACER_EMB_USART3
+VP_TRACER_EMB_VS_traceremb_usart3.Signal=TRACER_EMB_VS_traceremb_usart3
+VP_USBPD_VS_PD3FULL.Mode=PD3_Full_Stack
+VP_USBPD_VS_PD3FULL.Signal=USBPD_VS_PD3FULL
+VP_USBPD_VS_USBPD1.Mode=USBPD_P0
+VP_USBPD_VS_USBPD1.Signal=USBPD_VS_USBPD1
+VP_USBPD_VS_usbpd_tim1.Mode=TIM1
+VP_USBPD_VS_usbpd_tim1.Signal=USBPD_VS_usbpd_tim1
+VP_USBPD_VS_usbpd_traceremb.Mode=TRACER_EMB
+VP_USBPD_VS_usbpd_traceremb.Signal=USBPD_VS_usbpd_traceremb
+board=STM32G0C1E-EV
+ProjectManager.Example=USB-PD_Provider_1port
+ProjectManager.ExampleSource=MxCubeFw
diff --git a/USB-PD_Provider_1port/Utilities/Fonts/Release_Notes.html b/USB-PD_Provider_1port/Utilities/Fonts/Release_Notes.html
new file mode 100644
index 0000000..c79b5d1
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/Fonts/Release_Notes.html
@@ -0,0 +1,64 @@
+
+
+
+  
+  
+  
+  Release Notes for STM32Cube Fonts Utilities Driver
+  
+  
+  
+
+
+

+

+

+

+

+
Release Notes for STM32Cube Fonts Utilities Driver

+
Copyright © 2014 STMicroelectronics

+

+
+

+

+

+
License

+
Licensed by ST under BSD 3-Clause license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:

+
https://opensource.org/licenses/BSD-3-Clause

+
Purpose

+
This directory contains the driver for STM32Cube Fonts Utilities.

+

+

+
Update History

+

+ 
+

+
Changes

+
    
+
  • Update release notes to new format
    • 
+

+

+

+

+ 
+

+
Changes

+
    
+
  • First official release
    • 
+

+

+

+

+

+
+
+
diff --git a/USB-PD_Provider_1port/Utilities/Fonts/font12.c b/USB-PD_Provider_1port/Utilities/Fonts/font12.c
new file mode 100644
index 0000000..b47a490
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/Fonts/font12.c
@@ -0,0 +1,1429 @@
+/**
+  ******************************************************************************
+  * @file    font12.c
+  * @author  MCD Application Team
+  * @brief   This file provides text Font12 for STM32 board's LCD driver.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2014 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+  * @{
+  */
+
+/** @addtogroup STM32_EVAL
+  * @{
+  */
+
+/** @addtogroup Common
+  * @{
+  */
+
+/** @addtogroup FONTS
+  * @brief      This file provides text Font12 for STM32xx-EVAL's LCD driver.
+  * @{
+  */
+
+/** @defgroup FONTS_Private_Types
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Defines
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Macros
+  * @{
+  */
+/**
+  * @}
+  */ 
+  
+
+/** @defgroup FONTS_Private_Variables
+  * @{
+  */
+//
+//  Font data for Courier New 12pt
+//
+
+const uint8_t Font12_Table[] =
+{
+	// @0 ' ' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @12 '!' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @24 '"' (7 pixels wide)
+	0x00, //
+	0x6C, //  ## ##
+	0x48, //  #  #
+	0x48, //  #  #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @36 '#' (7 pixels wide)
+	0x00, //
+	0x14, //    # #
+	0x14, //    # #
+	0x28, //   # #
+	0x7C, //  #####
+	0x28, //   # #
+	0x7C, //  #####
+	0x28, //   # #
+	0x50, //  # #
+	0x50, //  # #
+	0x00, //
+	0x00, //
+
+	// @48 '$' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x38, //   ###
+	0x40, //  #
+	0x40, //  #
+	0x38, //   ###
+	0x48, //  #  #
+	0x70, //  ###
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+
+	// @60 '%' (7 pixels wide)
+	0x00, //
+	0x20, //   #
+	0x50, //  # #
+	0x20, //   #
+	0x0C, //     ##
+	0x70, //  ###
+	0x08, //     #
+	0x14, //    # #
+	0x08, //     #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @72 '&' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x18, //    ##
+	0x20, //   #
+	0x20, //   #
+	0x54, //  # # #
+	0x48, //  #  #
+	0x34, //   ## #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @84 ''' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @96 '(' (7 pixels wide)
+	0x00, //
+	0x08, //     #
+	0x08, //     #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x08, //     #
+	0x08, //     #
+	0x00, //
+
+	// @108 ')' (7 pixels wide)
+	0x00, //
+	0x20, //   #
+	0x20, //   #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x20, //   #
+	0x20, //   #
+	0x00, //
+
+	// @120 '*' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x7C, //  #####
+	0x10, //    #
+	0x28, //   # #
+	0x28, //   # #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @132 '+' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0xFE, // #######
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @144 ',' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x18, //    ##
+	0x10, //    #
+	0x30, //   ##
+	0x20, //   #
+	0x00, //
+
+	// @156 '-' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @168 '.' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x30, //   ##
+	0x30, //   ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @180 '/' (7 pixels wide)
+	0x00, //
+	0x04, //      #
+	0x04, //      #
+	0x08, //     #
+	0x08, //     #
+	0x10, //    #
+	0x10, //    #
+	0x20, //   #
+	0x20, //   #
+	0x40, //  #
+	0x00, //
+	0x00, //
+
+	// @192 '0' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @204 '1' (7 pixels wide)
+	0x00, //
+	0x30, //   ##
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @216 '2' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x04, //      #
+	0x08, //     #
+	0x10, //    #
+	0x20, //   #
+	0x44, //  #   #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @228 '3' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x04, //      #
+	0x18, //    ##
+	0x04, //      #
+	0x04, //      #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @240 '4' (7 pixels wide)
+	0x00, //
+	0x0C, //     ##
+	0x14, //    # #
+	0x14, //    # #
+	0x24, //   #  #
+	0x44, //  #   #
+	0x7E, //  ######
+	0x04, //      #
+	0x0E, //     ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @252 '5' (7 pixels wide)
+	0x00, //
+	0x3C, //   ####
+	0x20, //   #
+	0x20, //   #
+	0x38, //   ###
+	0x04, //      #
+	0x04, //      #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @264 '6' (7 pixels wide)
+	0x00, //
+	0x1C, //    ###
+	0x20, //   #
+	0x40, //  #
+	0x78, //  ####
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @276 '7' (7 pixels wide)
+	0x00, //
+	0x7C, //  #####
+	0x44, //  #   #
+	0x04, //      #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @288 '8' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @300 '9' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x3C, //   ####
+	0x04, //      #
+	0x08, //     #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @312 ':' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x30, //   ##
+	0x30, //   ##
+	0x00, //
+	0x00, //
+	0x30, //   ##
+	0x30, //   ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @324 ';' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x18, //    ##
+	0x18, //    ##
+	0x00, //
+	0x00, //
+	0x18, //    ##
+	0x30, //   ##
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @336 '<' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x0C, //     ##
+	0x10, //    #
+	0x60, //  ##
+	0x80, // #
+	0x60, //  ##
+	0x10, //    #
+	0x0C, //     ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @348 '=' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x7C, //  #####
+	0x00, //
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @360 '>' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0xC0, // ##
+	0x20, //   #
+	0x18, //    ##
+	0x04, //      #
+	0x18, //    ##
+	0x20, //   #
+	0xC0, // ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @372 '?' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x18, //    ##
+	0x24, //   #  #
+	0x04, //      #
+	0x08, //     #
+	0x10, //    #
+	0x00, //
+	0x30, //   ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @384 '@' (7 pixels wide)
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x4C, //  #  ##
+	0x54, //  # # #
+	0x54, //  # # #
+	0x4C, //  #  ##
+	0x40, //  #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+
+	// @396 'A' (7 pixels wide)
+	0x00, //
+	0x30, //   ##
+	0x10, //    #
+	0x28, //   # #
+	0x28, //   # #
+	0x28, //   # #
+	0x7C, //  #####
+	0x44, //  #   #
+	0xEE, // ### ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @408 'B' (7 pixels wide)
+	0x00, //
+	0xF8, // #####
+	0x44, //  #   #
+	0x44, //  #   #
+	0x78, //  ####
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0xF8, // #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @420 'C' (7 pixels wide)
+	0x00, //
+	0x3C, //   ####
+	0x44, //  #   #
+	0x40, //  #
+	0x40, //  #
+	0x40, //  #
+	0x40, //  #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @432 'D' (7 pixels wide)
+	0x00, //
+	0xF0, // ####
+	0x48, //  #  #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x48, //  #  #
+	0xF0, // ####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @444 'E' (7 pixels wide)
+	0x00, //
+	0xFC, // ######
+	0x44, //  #   #
+	0x50, //  # #
+	0x70, //  ###
+	0x50, //  # #
+	0x40, //  #
+	0x44, //  #   #
+	0xFC, // ######
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @456 'F' (7 pixels wide)
+	0x00, //
+	0x7E, //  ######
+	0x22, //   #   #
+	0x28, //   # #
+	0x38, //   ###
+	0x28, //   # #
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @468 'G' (7 pixels wide)
+	0x00, //
+	0x3C, //   ####
+	0x44, //  #   #
+	0x40, //  #
+	0x40, //  #
+	0x4E, //  #  ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @480 'H' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x7C, //  #####
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0xEE, // ### ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @492 'I' (7 pixels wide)
+	0x00, //
+	0x7C, //  #####
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @504 'J' (7 pixels wide)
+	0x00, //
+	0x3C, //   ####
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @516 'K' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x48, //  #  #
+	0x50, //  # #
+	0x70, //  ###
+	0x48, //  #  #
+	0x44, //  #   #
+	0xE6, // ###  ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @528 'L' (7 pixels wide)
+	0x00, //
+	0x70, //  ###
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x24, //   #  #
+	0x24, //   #  #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @540 'M' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x6C, //  ## ##
+	0x6C, //  ## ##
+	0x54, //  # # #
+	0x54, //  # # #
+	0x44, //  #   #
+	0x44, //  #   #
+	0xEE, // ### ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @552 'N' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x64, //  ##  #
+	0x64, //  ##  #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x4C, //  #  ##
+	0xEC, // ### ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @564 'O' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @576 'P' (7 pixels wide)
+	0x00, //
+	0x78, //  ####
+	0x24, //   #  #
+	0x24, //   #  #
+	0x24, //   #  #
+	0x38, //   ###
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @588 'Q' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x1C, //    ###
+	0x00, //
+	0x00, //
+
+	// @600 'R' (7 pixels wide)
+	0x00, //
+	0xF8, // #####
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x78, //  ####
+	0x48, //  #  #
+	0x44, //  #   #
+	0xE2, // ###   #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @612 'S' (7 pixels wide)
+	0x00, //
+	0x34, //   ## #
+	0x4C, //  #  ##
+	0x40, //  #
+	0x38, //   ###
+	0x04, //      #
+	0x04, //      #
+	0x64, //  ##  #
+	0x58, //  # ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @624 'T' (7 pixels wide)
+	0x00, //
+	0xFE, // #######
+	0x92, // #  #  #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @636 'U' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @648 'V' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x28, //   # #
+	0x28, //   # #
+	0x28, //   # #
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @660 'W' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x28, //   # #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @672 'X' (7 pixels wide)
+	0x00, //
+	0xC6, // ##   ##
+	0x44, //  #   #
+	0x28, //   # #
+	0x10, //    #
+	0x10, //    #
+	0x28, //   # #
+	0x44, //  #   #
+	0xC6, // ##   ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @684 'Y' (7 pixels wide)
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x28, //   # #
+	0x28, //   # #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @696 'Z' (7 pixels wide)
+	0x00, //
+	0x7C, //  #####
+	0x44, //  #   #
+	0x08, //     #
+	0x10, //    #
+	0x10, //    #
+	0x20, //   #
+	0x44, //  #   #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @708 '[' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x38, //   ###
+	0x00, //
+
+	// @720 '\' (7 pixels wide)
+	0x00, //
+	0x40, //  #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x10, //    #
+	0x10, //    #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x00, //
+	0x00, //
+
+	// @732 ']' (7 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x38, //   ###
+	0x00, //
+
+	// @744 '^' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x10, //    #
+	0x28, //   # #
+	0x44, //  #   #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @756 '_' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0xFE, // #######
+
+	// @768 '`' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x08, //     #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @780 'a' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x3C, //   ####
+	0x44, //  #   #
+	0x44, //  #   #
+	0x3E, //   #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @792 'b' (7 pixels wide)
+	0x00, //
+	0xC0, // ##
+	0x40, //  #
+	0x58, //  # ##
+	0x64, //  ##  #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0xF8, // #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @804 'c' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x3C, //   ####
+	0x44, //  #   #
+	0x40, //  #
+	0x40, //  #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @816 'd' (7 pixels wide)
+	0x00, //
+	0x0C, //     ##
+	0x04, //      #
+	0x34, //   ## #
+	0x4C, //  #  ##
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x3E, //   #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @828 'e' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x7C, //  #####
+	0x40, //  #
+	0x40, //  #
+	0x3C, //   ####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @840 'f' (7 pixels wide)
+	0x00, //
+	0x1C, //    ###
+	0x20, //   #
+	0x7C, //  #####
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @852 'g' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x36, //   ## ##
+	0x4C, //  #  ##
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x3C, //   ####
+	0x04, //      #
+	0x38, //   ###
+	0x00, //
+
+	// @864 'h' (7 pixels wide)
+	0x00, //
+	0xC0, // ##
+	0x40, //  #
+	0x58, //  # ##
+	0x64, //  ##  #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0xEE, // ### ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @876 'i' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x00, //
+	0x70, //  ###
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @888 'j' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x00, //
+	0x78, //  ####
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x08, //     #
+	0x70, //  ###
+	0x00, //
+
+	// @900 'k' (7 pixels wide)
+	0x00, //
+	0xC0, // ##
+	0x40, //  #
+	0x5C, //  # ###
+	0x48, //  #  #
+	0x70, //  ###
+	0x50, //  # #
+	0x48, //  #  #
+	0xDC, // ## ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @912 'l' (7 pixels wide)
+	0x00, //
+	0x30, //   ##
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @924 'm' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xE8, // ### #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x54, //  # # #
+	0xFE, // #######
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @936 'n' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xD8, // ## ##
+	0x64, //  ##  #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0xEE, // ### ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @948 'o' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x38, //   ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @960 'p' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xD8, // ## ##
+	0x64, //  ##  #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x78, //  ####
+	0x40, //  #
+	0xE0, // ###
+	0x00, //
+
+	// @972 'q' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x36, //   ## ##
+	0x4C, //  #  ##
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x3C, //   ####
+	0x04, //      #
+	0x0E, //     ###
+	0x00, //
+
+	// @984 'r' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x6C, //  ## ##
+	0x30, //   ##
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @996 's' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x3C, //   ####
+	0x44, //  #   #
+	0x38, //   ###
+	0x04, //      #
+	0x44, //  #   #
+	0x78, //  ####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @1008 't' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x20, //   #
+	0x7C, //  #####
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x22, //   #   #
+	0x1C, //    ###
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @1020 'u' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xCC, // ##  ##
+	0x44, //  #   #
+	0x44, //  #   #
+	0x44, //  #   #
+	0x4C, //  #  ##
+	0x36, //   ## ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @1032 'v' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x44, //  #   #
+	0x28, //   # #
+	0x28, //   # #
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @1044 'w' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x54, //  # # #
+	0x28, //   # #
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @1056 'x' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xCC, // ##  ##
+	0x48, //  #  #
+	0x30, //   ##
+	0x30, //   ##
+	0x48, //  #  #
+	0xCC, // ##  ##
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @1068 'y' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0xEE, // ### ###
+	0x44, //  #   #
+	0x24, //   #  #
+	0x28, //   # #
+	0x18, //    ##
+	0x10, //    #
+	0x10, //    #
+	0x78, //  ####
+	0x00, //
+
+	// @1080 'z' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x7C, //  #####
+	0x48, //  #  #
+	0x10, //    #
+	0x20, //   #
+	0x44, //  #   #
+	0x7C, //  #####
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @1092 '{' (7 pixels wide)
+	0x00, //
+	0x08, //     #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x20, //   #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x08, //     #
+	0x00, //
+
+	// @1104 '|' (7 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+
+	// @1116 '}' (7 pixels wide)
+	0x00, //
+	0x20, //   #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x08, //     #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x20, //   #
+	0x00, //
+
+	// @1128 '~' (7 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x24, //   #  #
+	0x58, //  # ##
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+};
+
+sFONT Font12 = {
+  Font12_Table,
+  7, /* Width */
+  12, /* Height */
+};
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/Fonts/font16.c b/USB-PD_Provider_1port/Utilities/Fonts/font16.c
new file mode 100644
index 0000000..763f064
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/Fonts/font16.c
@@ -0,0 +1,1809 @@
+/**
+  ******************************************************************************
+  * @file    font16.c
+  * @author  MCD Application Team
+  * @brief   This file provides text font16 for STM32 board's LCD driver.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2014 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+  * @{
+  */
+
+/** @addtogroup STM32_EVAL
+  * @{
+  */
+
+/** @addtogroup Common
+  * @{
+  */
+
+/** @addtogroup FONTS
+  * @brief      This file provides text font16 for STM32xx-EVAL's LCD driver.
+  * @{
+  */
+
+/** @defgroup FONTS_Private_Types
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Defines
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Macros
+  * @{
+  */
+/**
+  * @}
+  */ 
+  
+
+/** @defgroup FONTS_Private_Variables
+  * @{
+  */
+//
+//  Font data for Courier New 12pt
+//
+
+const uint8_t Font16_Table[] =
+{
+	// @0 ' ' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @32 '!' (11 pixels wide)
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @64 '"' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1D, 0xC0, //    ### ###
+	0x1D, 0xC0, //    ### ###
+	0x08, 0x80, //     #   #
+	0x08, 0x80, //     #   #
+	0x08, 0x80, //     #   #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @96 '#' (11 pixels wide)
+	0x00, 0x00, //
+	0x0D, 0x80, //     ## ##
+	0x0D, 0x80, //     ## ##
+	0x0D, 0x80, //     ## ##
+	0x0D, 0x80, //     ## ##
+	0x3F, 0xC0, //   ########
+	0x1B, 0x00, //    ## ##
+	0x3F, 0xC0, //   ########
+	0x1B, 0x00, //    ## ##
+	0x1B, 0x00, //    ## ##
+	0x1B, 0x00, //    ## ##
+	0x1B, 0x00, //    ## ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @128 '$' (11 pixels wide)
+	0x04, 0x00, //      #
+	0x1F, 0x80, //    ######
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x38, 0x00, //   ###
+	0x1E, 0x00, //    ####
+	0x0F, 0x00, //     ####
+	0x03, 0x80, //       ###
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x3F, 0x00, //   ######
+	0x04, 0x00, //      #
+	0x04, 0x00, //      #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @160 '%' (11 pixels wide)
+	0x00, 0x00, //
+	0x18, 0x00, //    ##
+	0x24, 0x00, //   #  #
+	0x24, 0x00, //   #  #
+	0x18, 0xC0, //    ##   ##
+	0x07, 0x80, //      ####
+	0x1E, 0x00, //    ####
+	0x31, 0x80, //   ##   ##
+	0x02, 0x40, //       #  #
+	0x02, 0x40, //       #  #
+	0x01, 0x80, //        ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @192 '&' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0F, 0x00, //     ####
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x0C, 0x00, //     ##
+	0x1D, 0x80, //    ### ##
+	0x37, 0x00, //   ## ###
+	0x33, 0x00, //   ##  ##
+	0x1D, 0x80, //    ### ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @224 ''' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x02, 0x00, //       #
+	0x02, 0x00, //       #
+	0x02, 0x00, //       #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @256 '(' (11 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x0E, 0x00, //     ###
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0E, 0x00, //     ###
+	0x06, 0x00, //      ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @288 ')' (11 pixels wide)
+	0x00, 0x00, //
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x0C, 0x00, //     ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x1C, 0x00, //    ###
+	0x18, 0x00, //    ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @320 '*' (11 pixels wide)
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x3F, 0xC0, //   ########
+	0x3F, 0xC0, //   ########
+	0x0F, 0x00, //     ####
+	0x1F, 0x80, //    ######
+	0x19, 0x80, //    ##  ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @352 '+' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x04, 0x00, //      #
+	0x04, 0x00, //      #
+	0x04, 0x00, //      #
+	0x3F, 0x80, //   #######
+	0x04, 0x00, //      #
+	0x04, 0x00, //      #
+	0x04, 0x00, //      #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @384 ',' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x04, 0x00, //      #
+	0x0C, 0x00, //     ##
+	0x08, 0x00, //     #
+	0x08, 0x00, //     #
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @416 '-' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0x80, //   #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @448 '.' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @480 '/' (11 pixels wide)
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @512 '0' (11 pixels wide)
+	0x00, 0x00, //
+	0x0E, 0x00, //     ###
+	0x1B, 0x00, //    ## ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x1B, 0x00, //    ## ##
+	0x0E, 0x00, //     ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @544 '1' (11 pixels wide)
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x3E, 0x00, //   #####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x3F, 0xC0, //   ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @576 '2' (11 pixels wide)
+	0x00, 0x00, //
+	0x0F, 0x00, //     ####
+	0x19, 0x80, //    ##  ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x18, 0x00, //    ##
+	0x30, 0x00, //   ##
+	0x3F, 0x80, //   #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @608 '3' (11 pixels wide)
+	0x00, 0x00, //
+	0x3F, 0x00, //   ######
+	0x61, 0x80, //  ##    ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x1F, 0x00, //    #####
+	0x03, 0x80, //       ###
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x61, 0x80, //  ##    ##
+	0x3F, 0x00, //   ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @640 '4' (11 pixels wide)
+	0x00, 0x00, //
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x0F, 0x00, //     ####
+	0x0B, 0x00, //     # ##
+	0x1B, 0x00, //    ## ##
+	0x13, 0x00, //    #  ##
+	0x33, 0x00, //   ##  ##
+	0x3F, 0x80, //   #######
+	0x03, 0x00, //       ##
+	0x0F, 0x80, //     #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @672 '5' (11 pixels wide)
+	0x00, 0x00, //
+	0x1F, 0x80, //    ######
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x1F, 0x00, //    #####
+	0x11, 0x80, //    #   ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x21, 0x80, //   #    ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @704 '6' (11 pixels wide)
+	0x00, 0x00, //
+	0x07, 0x80, //      ####
+	0x1C, 0x00, //    ###
+	0x18, 0x00, //    ##
+	0x30, 0x00, //   ##
+	0x37, 0x00, //   ## ###
+	0x39, 0x80, //   ###  ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x19, 0x80, //    ##  ##
+	0x0F, 0x00, //     ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @736 '7' (11 pixels wide)
+	0x00, 0x00, //
+	0x7F, 0x00, //  #######
+	0x43, 0x00, //  #    ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @768 '8' (11 pixels wide)
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @800 '9' (11 pixels wide)
+	0x00, 0x00, //
+	0x1E, 0x00, //    ####
+	0x33, 0x00, //   ##  ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x33, 0x80, //   ##  ###
+	0x1D, 0x80, //    ### ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x07, 0x00, //      ###
+	0x3C, 0x00, //   ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @832 ':' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @864 ';' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x04, 0x00, //      #
+	0x08, 0x00, //     #
+	0x08, 0x00, //     #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @896 '<' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0xC0, //         ##
+	0x03, 0x00, //       ##
+	0x04, 0x00, //      #
+	0x18, 0x00, //    ##
+	0x60, 0x00, //  ##
+	0x18, 0x00, //    ##
+	0x04, 0x00, //      #
+	0x03, 0x00, //       ##
+	0x00, 0xC0, //         ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @928 '=' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0xC0, //  #########
+	0x00, 0x00, //
+	0x7F, 0xC0, //  #########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @960 '>' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x60, 0x00, //  ##
+	0x18, 0x00, //    ##
+	0x04, 0x00, //      #
+	0x03, 0x00, //       ##
+	0x00, 0xC0, //         ##
+	0x03, 0x00, //       ##
+	0x04, 0x00, //      #
+	0x18, 0x00, //    ##
+	0x60, 0x00, //  ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @992 '?' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x01, 0x80, //        ##
+	0x07, 0x00, //      ###
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1024 '@' (11 pixels wide)
+	0x00, 0x00, //
+	0x0E, 0x00, //     ###
+	0x11, 0x00, //    #   #
+	0x21, 0x00, //   #    #
+	0x21, 0x00, //   #    #
+	0x27, 0x00, //   #  ###
+	0x29, 0x00, //   # #  #
+	0x29, 0x00, //   # #  #
+	0x27, 0x00, //   #  ###
+	0x20, 0x00, //   #
+	0x11, 0x00, //    #   #
+	0x0E, 0x00, //     ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1056 'A' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0x00, //   ######
+	0x0F, 0x00, //     ####
+	0x09, 0x00, //     #  #
+	0x19, 0x80, //    ##  ##
+	0x19, 0x80, //    ##  ##
+	0x1F, 0x80, //    ######
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x79, 0xE0, //  ####  ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1088 'B' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x00, //  #######
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x3F, 0x00, //   ######
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x7F, 0x00, //  #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1120 'C' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x40, //    ##### #
+	0x30, 0xC0, //   ##    ##
+	0x60, 0x40, //  ##      #
+	0x60, 0x00, //  ##
+	0x60, 0x00, //  ##
+	0x60, 0x00, //  ##
+	0x60, 0x40, //  ##      #
+	0x30, 0x80, //   ##    #
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1152 'D' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x00, //  #######
+	0x31, 0x80, //   ##   ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x31, 0x80, //   ##   ##
+	0x7F, 0x00, //  #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1184 'E' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x80, //  ########
+	0x30, 0x80, //   ##    #
+	0x30, 0x80, //   ##    #
+	0x32, 0x00, //   ##  #
+	0x3E, 0x00, //   #####
+	0x32, 0x00, //   ##  #
+	0x30, 0x80, //   ##    #
+	0x30, 0x80, //   ##    #
+	0x7F, 0x80, //  ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1216 'F' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0xC0, //  #########
+	0x30, 0x40, //   ##     #
+	0x30, 0x40, //   ##     #
+	0x32, 0x00, //   ##  #
+	0x3E, 0x00, //   #####
+	0x32, 0x00, //   ##  #
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x7C, 0x00, //  #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1248 'G' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1E, 0x80, //    #### #
+	0x31, 0x80, //   ##   ##
+	0x60, 0x80, //  ##     #
+	0x60, 0x00, //  ##
+	0x60, 0x00, //  ##
+	0x67, 0xC0, //  ##  #####
+	0x61, 0x80, //  ##    ##
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1280 'H' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0xC0, //  #### ####
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x3F, 0x80, //   #######
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x7B, 0xC0, //  #### ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1312 'I' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0xC0, //   ########
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x3F, 0xC0, //   ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1344 'J' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0xC0, //    #######
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x63, 0x00, //  ##   ##
+	0x63, 0x00, //  ##   ##
+	0x63, 0x00, //  ##   ##
+	0x3E, 0x00, //   #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1376 'K' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0xC0, //  #### ####
+	0x31, 0x80, //   ##   ##
+	0x33, 0x00, //   ##  ##
+	0x36, 0x00, //   ## ##
+	0x3C, 0x00, //   ####
+	0x3E, 0x00, //   #####
+	0x33, 0x00, //   ##  ##
+	0x31, 0x80, //   ##   ##
+	0x79, 0xC0, //  ####  ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1408 'L' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7E, 0x00, //  ######
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x40, //    ##    #
+	0x18, 0x40, //    ##    #
+	0x18, 0x40, //    ##    #
+	0x7F, 0xC0, //  #########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1440 'M' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0xE0, 0xE0, // ###     ###
+	0x60, 0xC0, //  ##     ##
+	0x71, 0xC0, //  ###   ###
+	0x7B, 0xC0, //  #### ####
+	0x6A, 0xC0, //  ## # # ##
+	0x6E, 0xC0, //  ## ### ##
+	0x64, 0xC0, //  ##  #  ##
+	0x60, 0xC0, //  ##     ##
+	0xFB, 0xE0, // ##### #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1472 'N' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x73, 0xC0, //  ###  ####
+	0x31, 0x80, //   ##   ##
+	0x39, 0x80, //   ###  ##
+	0x3D, 0x80, //   #### ##
+	0x35, 0x80, //   ## # ##
+	0x37, 0x80, //   ## ####
+	0x33, 0x80, //   ##  ###
+	0x31, 0x80, //   ##   ##
+	0x79, 0x80, //  ####  ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1504 'O' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x31, 0x80, //   ##   ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1536 'P' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x00, //  #######
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x3F, 0x00, //   ######
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x7E, 0x00, //  ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1568 'Q' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x31, 0x80, //   ##   ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x0C, 0xC0, //     ##  ##
+	0x1F, 0x80, //    ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1600 'R' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x00, //  #######
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x3E, 0x00, //   #####
+	0x33, 0x00, //   ##  ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x7C, 0xE0, //  #####  ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1632 'S' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x80, //    ######
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x38, 0x00, //   ###
+	0x1F, 0x00, //    #####
+	0x03, 0x80, //       ###
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x3F, 0x00, //   ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1664 'T' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x80, //  ########
+	0x4C, 0x80, //  #  ##  #
+	0x4C, 0x80, //  #  ##  #
+	0x4C, 0x80, //  #  ##  #
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x3F, 0x00, //   ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1696 'U' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0xC0, //  #### ####
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1728 'V' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0xC0, //  #### ####
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x1B, 0x00, //    ## ##
+	0x1B, 0x00, //    ## ##
+	0x1B, 0x00, //    ## ##
+	0x0A, 0x00, //     # #
+	0x0E, 0x00, //     ###
+	0x0E, 0x00, //     ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1760 'W' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0xFB, 0xE0, // ##### #####
+	0x60, 0xC0, //  ##     ##
+	0x64, 0xC0, //  ##  #  ##
+	0x6E, 0xC0, //  ## ### ##
+	0x6E, 0xC0, //  ## ### ##
+	0x2A, 0x80, //   # # # #
+	0x3B, 0x80, //   ### ###
+	0x3B, 0x80, //   ### ###
+	0x31, 0x80, //   ##   ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1792 'X' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0xC0, //  #### ####
+	0x31, 0x80, //   ##   ##
+	0x1B, 0x00, //    ## ##
+	0x0E, 0x00, //     ###
+	0x0E, 0x00, //     ###
+	0x0E, 0x00, //     ###
+	0x1B, 0x00, //    ## ##
+	0x31, 0x80, //   ##   ##
+	0x7B, 0xC0, //  #### ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1824 'Y' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x79, 0xE0, //  ####  ####
+	0x30, 0xC0, //   ##    ##
+	0x19, 0x80, //    ##  ##
+	0x0F, 0x00, //     ####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x1F, 0x80, //    ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1856 'Z' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0x80, //   #######
+	0x21, 0x80, //   #    ##
+	0x23, 0x00, //   #   ##
+	0x06, 0x00, //      ##
+	0x04, 0x00, //      #
+	0x0C, 0x00, //     ##
+	0x18, 0x80, //    ##   #
+	0x30, 0x80, //   ##    #
+	0x3F, 0x80, //   #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1888 '[' (11 pixels wide)
+	0x00, 0x00, //
+	0x07, 0x80, //      ####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x07, 0x80, //      ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1920 '\' (11 pixels wide)
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x06, 0x00, //      ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1952 ']' (11 pixels wide)
+	0x00, 0x00, //
+	0x1E, 0x00, //    ####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x1E, 0x00, //    ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1984 '^' (11 pixels wide)
+	0x04, 0x00, //      #
+	0x0A, 0x00, //     # #
+	0x0A, 0x00, //     # #
+	0x11, 0x00, //    #   #
+	0x20, 0x80, //   #     #
+	0x20, 0x80, //   #     #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2016 '_' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0xFF, 0xE0, // ###########
+
+	// @2048 '`' (11 pixels wide)
+	0x08, 0x00, //     #
+	0x04, 0x00, //      #
+	0x02, 0x00, //       #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2080 'a' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x1F, 0x80, //    ######
+	0x31, 0x80, //   ##   ##
+	0x33, 0x80, //   ##  ###
+	0x1D, 0xC0, //    ### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2112 'b' (11 pixels wide)
+	0x00, 0x00, //
+	0x70, 0x00, //  ###
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x37, 0x00, //   ## ###
+	0x39, 0x80, //   ###  ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x39, 0x80, //   ###  ##
+	0x77, 0x00, //  ### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2144 'c' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1E, 0x80, //    #### #
+	0x31, 0x80, //   ##   ##
+	0x60, 0x80, //  ##     #
+	0x60, 0x00, //  ##
+	0x60, 0x80, //  ##     #
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2176 'd' (11 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x1D, 0x80, //    ### ##
+	0x33, 0x80, //   ##  ###
+	0x61, 0x80, //  ##    ##
+	0x61, 0x80, //  ##    ##
+	0x61, 0x80, //  ##    ##
+	0x33, 0x80, //   ##  ###
+	0x1D, 0xC0, //    ### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2208 'e' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x31, 0x80, //   ##   ##
+	0x60, 0xC0, //  ##     ##
+	0x7F, 0xC0, //  #########
+	0x60, 0x00, //  ##
+	0x30, 0xC0, //   ##    ##
+	0x1F, 0x80, //    ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2240 'f' (11 pixels wide)
+	0x00, 0x00, //
+	0x07, 0xE0, //      ######
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x3F, 0x80, //   #######
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x3F, 0x80, //   #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2272 'g' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1D, 0xC0, //    ### ###
+	0x33, 0x80, //   ##  ###
+	0x61, 0x80, //  ##    ##
+	0x61, 0x80, //  ##    ##
+	0x61, 0x80, //  ##    ##
+	0x33, 0x80, //   ##  ###
+	0x1D, 0x80, //    ### ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2304 'h' (11 pixels wide)
+	0x00, 0x00, //
+	0x70, 0x00, //  ###
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x37, 0x00, //   ## ###
+	0x39, 0x80, //   ###  ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x7B, 0xC0, //  #### ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2336 'i' (11 pixels wide)
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x00, 0x00, //
+	0x1E, 0x00, //    ####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x3F, 0xC0, //   ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2368 'j' (11 pixels wide)
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x00, 0x00, //
+	0x3F, 0x00, //   ######
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x3E, 0x00, //   #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2400 'k' (11 pixels wide)
+	0x00, 0x00, //
+	0x70, 0x00, //  ###
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x37, 0x80, //   ## ####
+	0x36, 0x00, //   ## ##
+	0x3C, 0x00, //   ####
+	0x3C, 0x00, //   ####
+	0x36, 0x00, //   ## ##
+	0x33, 0x00, //   ##  ##
+	0x77, 0xC0, //  ### #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2432 'l' (11 pixels wide)
+	0x00, 0x00, //
+	0x1E, 0x00, //    ####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x3F, 0xC0, //   ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2464 'm' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x80, //  ########
+	0x36, 0xC0, //   ## ## ##
+	0x36, 0xC0, //   ## ## ##
+	0x36, 0xC0, //   ## ## ##
+	0x36, 0xC0, //   ## ## ##
+	0x36, 0xC0, //   ## ## ##
+	0x76, 0xE0, //  ### ## ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2496 'n' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x77, 0x00, //  ### ###
+	0x39, 0x80, //   ###  ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x7B, 0xC0, //  #### ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2528 'o' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x31, 0x80, //   ##   ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x60, 0xC0, //  ##     ##
+	0x31, 0x80, //   ##   ##
+	0x1F, 0x00, //    #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2560 'p' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x77, 0x00, //  ### ###
+	0x39, 0x80, //   ###  ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x30, 0xC0, //   ##    ##
+	0x39, 0x80, //   ###  ##
+	0x37, 0x00, //   ## ###
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x7C, 0x00, //  #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2592 'q' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1D, 0xC0, //    ### ###
+	0x33, 0x80, //   ##  ###
+	0x61, 0x80, //  ##    ##
+	0x61, 0x80, //  ##    ##
+	0x61, 0x80, //  ##    ##
+	0x33, 0x80, //   ##  ###
+	0x1D, 0x80, //    ### ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x07, 0xC0, //      #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2624 'r' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0x80, //  #### ###
+	0x1C, 0xC0, //    ###  ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x7F, 0x00, //  #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2656 's' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x80, //    ######
+	0x31, 0x80, //   ##   ##
+	0x3C, 0x00, //   ####
+	0x1F, 0x00, //    #####
+	0x03, 0x80, //       ###
+	0x31, 0x80, //   ##   ##
+	0x3F, 0x00, //   ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2688 't' (11 pixels wide)
+	0x00, 0x00, //
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x7F, 0x00, //  #######
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x18, 0x80, //    ##   #
+	0x0F, 0x00, //     ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2720 'u' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x73, 0x80, //  ###  ###
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x33, 0x80, //   ##  ###
+	0x1D, 0xC0, //    ### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2752 'v' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0xC0, //  #### ####
+	0x31, 0x80, //   ##   ##
+	0x31, 0x80, //   ##   ##
+	0x1B, 0x00, //    ## ##
+	0x1B, 0x00, //    ## ##
+	0x0E, 0x00, //     ###
+	0x0E, 0x00, //     ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2784 'w' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0xF1, 0xE0, // ####   ####
+	0x60, 0xC0, //  ##     ##
+	0x64, 0xC0, //  ##  #  ##
+	0x6E, 0xC0, //  ## ### ##
+	0x3B, 0x80, //   ### ###
+	0x3B, 0x80, //   ### ###
+	0x31, 0x80, //   ##   ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2816 'x' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7B, 0xC0, //  #### ####
+	0x1B, 0x00, //    ## ##
+	0x0E, 0x00, //     ###
+	0x0E, 0x00, //     ###
+	0x0E, 0x00, //     ###
+	0x1B, 0x00, //    ## ##
+	0x7B, 0xC0, //  #### ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2848 'y' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x79, 0xE0, //  ####  ####
+	0x30, 0xC0, //   ##    ##
+	0x19, 0x80, //    ##  ##
+	0x19, 0x80, //    ##  ##
+	0x0B, 0x00, //     # ##
+	0x0F, 0x00, //     ####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x3E, 0x00, //   #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2880 'z' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0x80, //   #######
+	0x21, 0x80, //   #    ##
+	0x03, 0x00, //       ##
+	0x0E, 0x00, //     ###
+	0x18, 0x00, //    ##
+	0x30, 0x80, //   ##    #
+	0x3F, 0x80, //   #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2912 '{' (11 pixels wide)
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x18, 0x00, //    ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x06, 0x00, //      ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2944 '|' (11 pixels wide)
+	0x00, 0x00, //
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2976 '}' (11 pixels wide)
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3008 '~' (11 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x18, 0x00, //    ##
+	0x24, 0x80, //   #  #  #
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+};
+
+sFONT Font16 = {
+  Font16_Table,
+  11, /* Width */
+  16, /* Height */
+};
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/Fonts/font20.c b/USB-PD_Provider_1port/Utilities/Fonts/font20.c
new file mode 100644
index 0000000..25d8f67
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/Fonts/font20.c
@@ -0,0 +1,2188 @@
+/**
+  ******************************************************************************
+  * @file    font20.c
+  * @author  MCD Application Team
+  * @brief   This file provides text font20 for STM32 board's LCD driver.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2014 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+  * @{
+  */
+
+/** @addtogroup STM32_EVAL
+  * @{
+  */
+
+/** @addtogroup Common
+  * @{
+  */
+
+/** @addtogroup FONTS
+  * @brief      This file provides text font20 for STM32xx-EVAL's LCD driver.
+  * @{
+  */
+
+/** @defgroup FONTS_Private_Types
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Defines
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Macros
+  * @{
+  */
+/**
+  * @}
+  */ 
+  
+
+/** @defgroup FONTS_Private_Variables
+  * @{
+  */
+
+// Character bitmaps for Courier New 15pt
+const uint8_t Font20_Table[] =
+{
+	// @0 ' ' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @40 '!' (14 pixels wide)
+	0x00, 0x00, //
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x02, 0x00, //       #
+	0x02, 0x00, //       #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @80 '"' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1C, 0xE0, //    ###  ###
+	0x1C, 0xE0, //    ###  ###
+	0x1C, 0xE0, //    ###  ###
+	0x08, 0x40, //     #    #
+	0x08, 0x40, //     #    #
+	0x08, 0x40, //     #    #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @120 '#' (14 pixels wide)
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @160 '$' (14 pixels wide)
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x07, 0xE0, //      ######
+	0x0F, 0xE0, //     #######
+	0x18, 0x60, //    ##    ##
+	0x18, 0x00, //    ##
+	0x1F, 0x00, //    #####
+	0x0F, 0xC0, //     ######
+	0x00, 0xE0, //         ###
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x1F, 0xC0, //    #######
+	0x1F, 0x80, //    ######
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @200 '%' (14 pixels wide)
+	0x00, 0x00, //
+	0x1C, 0x00, //    ###
+	0x22, 0x00, //   #   #
+	0x22, 0x00, //   #   #
+	0x22, 0x00, //   #   #
+	0x1C, 0x60, //    ###   ##
+	0x01, 0xE0, //        ####
+	0x0F, 0x80, //     #####
+	0x3C, 0x00, //   ####
+	0x31, 0xC0, //   ##   ###
+	0x02, 0x20, //       #   #
+	0x02, 0x20, //       #   #
+	0x02, 0x20, //       #   #
+	0x01, 0xC0, //        ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @240 '&' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0xE0, //       #####
+	0x0F, 0xE0, //     #######
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x06, 0x00, //      ##
+	0x0F, 0x30, //     ####  ##
+	0x1F, 0xF0, //    #########
+	0x19, 0xE0, //    ##  ####
+	0x18, 0xC0, //    ##   ##
+	0x1F, 0xF0, //    #########
+	0x07, 0xB0, //      #### ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @280 ''' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x01, 0x00, //        #
+	0x01, 0x00, //        #
+	0x01, 0x00, //        #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @320 '(' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @360 ')' (14 pixels wide)
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @400 '*' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x1B, 0x60, //    ## ## ##
+	0x1F, 0xE0, //    ########
+	0x07, 0x80, //      ####
+	0x07, 0x80, //      ####
+	0x0F, 0xC0, //     ######
+	0x0C, 0xC0, //     ##  ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @440 '+' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @480 ',' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x04, 0x00, //      #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @520 '-' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0xE0, //   #########
+	0x3F, 0xE0, //   #########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @560 '.' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @600 '/' (14 pixels wide)
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @640 '0' (14 pixels wide)
+	0x00, 0x00, //
+	0x0F, 0x80, //     #####
+	0x1F, 0xC0, //    #######
+	0x18, 0xC0, //    ##   ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x18, 0xC0, //    ##   ##
+	0x1F, 0xC0, //    #######
+	0x0F, 0x80, //     #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @680 '1' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x1F, 0x00, //    #####
+	0x1F, 0x00, //    #####
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @720 '2' (14 pixels wide)
+	0x00, 0x00, //
+	0x0F, 0x80, //     #####
+	0x1F, 0xC0, //    #######
+	0x38, 0xE0, //   ###   ###
+	0x30, 0x60, //   ##     ##
+	0x00, 0x60, //          ##
+	0x00, 0xC0, //         ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x18, 0x00, //    ##
+	0x3F, 0xE0, //   #########
+	0x3F, 0xE0, //   #########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @760 '3' (14 pixels wide)
+	0x00, 0x00, //
+	0x0F, 0x80, //     #####
+	0x3F, 0xC0, //   ########
+	0x30, 0xE0, //   ##    ###
+	0x00, 0x60, //          ##
+	0x00, 0xE0, //         ###
+	0x07, 0xC0, //      #####
+	0x07, 0xC0, //      #####
+	0x00, 0xE0, //         ###
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x60, 0xE0, //  ##     ###
+	0x7F, 0xC0, //  #########
+	0x3F, 0x80, //   #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @800 '4' (14 pixels wide)
+	0x00, 0x00, //
+	0x01, 0xC0, //        ###
+	0x03, 0xC0, //       ####
+	0x03, 0xC0, //       ####
+	0x06, 0xC0, //      ## ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0xC0, //     ##  ##
+	0x18, 0xC0, //    ##   ##
+	0x30, 0xC0, //   ##    ##
+	0x3F, 0xE0, //   #########
+	0x3F, 0xE0, //   #########
+	0x00, 0xC0, //         ##
+	0x03, 0xE0, //       #####
+	0x03, 0xE0, //       #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @840 '5' (14 pixels wide)
+	0x00, 0x00, //
+	0x1F, 0xC0, //    #######
+	0x1F, 0xC0, //    #######
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x1F, 0x80, //    ######
+	0x1F, 0xC0, //    #######
+	0x18, 0xE0, //    ##   ###
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x30, 0xE0, //   ##    ###
+	0x3F, 0xC0, //   ########
+	0x1F, 0x80, //    ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @880 '6' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0xE0, //       #####
+	0x0F, 0xE0, //     #######
+	0x1E, 0x00, //    ####
+	0x18, 0x00, //    ##
+	0x38, 0x00, //   ###
+	0x37, 0x80, //   ## ####
+	0x3F, 0xC0, //   ########
+	0x38, 0xE0, //   ###   ###
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x18, 0xE0, //    ##   ###
+	0x1F, 0xC0, //    #######
+	0x07, 0x80, //      ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @920 '7' (14 pixels wide)
+	0x00, 0x00, //
+	0x3F, 0xE0, //   #########
+	0x3F, 0xE0, //   #########
+	0x30, 0x60, //   ##     ##
+	0x00, 0x60, //          ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @960 '8' (14 pixels wide)
+	0x00, 0x00, //
+	0x0F, 0x80, //     #####
+	0x1F, 0xC0, //    #######
+	0x38, 0xE0, //   ###   ###
+	0x30, 0x60, //   ##     ##
+	0x38, 0xE0, //   ###   ###
+	0x1F, 0xC0, //    #######
+	0x1F, 0xC0, //    #######
+	0x38, 0xE0, //   ###   ###
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x38, 0xE0, //   ###   ###
+	0x1F, 0xC0, //    #######
+	0x0F, 0x80, //     #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1000 '9' (14 pixels wide)
+	0x00, 0x00, //
+	0x0F, 0x00, //     ####
+	0x1F, 0xC0, //    #######
+	0x38, 0xC0, //   ###   ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x38, 0xE0, //   ###   ###
+	0x1F, 0xE0, //    ########
+	0x0F, 0x60, //     #### ##
+	0x00, 0xE0, //         ###
+	0x00, 0xC0, //         ##
+	0x03, 0xC0, //       ####
+	0x3F, 0x80, //   #######
+	0x3E, 0x00, //   #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1040 ':' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x03, 0x80, //       ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1080 ';' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x01, 0xC0, //        ###
+	0x01, 0xC0, //        ###
+	0x01, 0xC0, //        ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x04, 0x00, //      #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1120 '<' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x30, //           ##
+	0x00, 0xF0, //         ####
+	0x03, 0xC0, //       ####
+	0x07, 0x00, //      ###
+	0x1C, 0x00, //    ###
+	0x78, 0x00, //  ####
+	0x1C, 0x00, //    ###
+	0x07, 0x00, //      ###
+	0x03, 0xC0, //       ####
+	0x00, 0xF0, //         ####
+	0x00, 0x30, //           ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1160 '=' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0xF0, //  ###########
+	0x7F, 0xF0, //  ###########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0xF0, //  ###########
+	0x7F, 0xF0, //  ###########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1200 '>' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x30, 0x00, //   ##
+	0x3C, 0x00, //   ####
+	0x0F, 0x00, //     ####
+	0x03, 0x80, //       ###
+	0x00, 0xE0, //         ###
+	0x00, 0x78, //          ####
+	0x00, 0xE0, //         ###
+	0x03, 0x80, //       ###
+	0x0F, 0x00, //     ####
+	0x3C, 0x00, //   ####
+	0x30, 0x00, //   ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1240 '?' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0F, 0x80, //     #####
+	0x1F, 0xC0, //    #######
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x00, 0x60, //          ##
+	0x01, 0xC0, //        ###
+	0x03, 0x80, //       ###
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1280 '@' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x80, //       ###
+	0x0C, 0x80, //     ##  #
+	0x08, 0x40, //     #    #
+	0x10, 0x40, //    #     #
+	0x10, 0x40, //    #     #
+	0x11, 0xC0, //    #   ###
+	0x12, 0x40, //    #  #  #
+	0x12, 0x40, //    #  #  #
+	0x12, 0x40, //    #  #  #
+	0x11, 0xC0, //    #   ###
+	0x10, 0x00, //    #
+	0x08, 0x00, //     #
+	0x08, 0x40, //     #    #
+	0x07, 0x80, //      ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1320 'A' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x80, //    ######
+	0x1F, 0x80, //    ######
+	0x03, 0x80, //       ###
+	0x06, 0xC0, //      ## ##
+	0x06, 0xC0, //      ## ##
+	0x0C, 0xC0, //     ##  ##
+	0x0C, 0x60, //     ##   ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x30, 0x30, //   ##      ##
+	0x78, 0x78, //  ####    ####
+	0x78, 0x78, //  ####    ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1360 'B' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0x80, //   #######
+	0x3F, 0xC0, //   ########
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0xE0, //    ##   ###
+	0x1F, 0xC0, //    #######
+	0x1F, 0xE0, //    ########
+	0x18, 0x70, //    ##    ###
+	0x18, 0x30, //    ##     ##
+	0x18, 0x30, //    ##     ##
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xE0, //   #########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1400 'C' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0xB0, //      #### ##
+	0x0F, 0xF0, //     ########
+	0x1C, 0x70, //    ###   ###
+	0x38, 0x30, //   ###     ##
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x38, 0x30, //   ###     ##
+	0x1C, 0x70, //    ###   ###
+	0x0F, 0xE0, //     #######
+	0x07, 0xC0, //      #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1440 'D' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7F, 0x80, //  ########
+	0x7F, 0xC0, //  #########
+	0x30, 0xE0, //   ##    ###
+	0x30, 0x70, //   ##     ###
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x70, //   ##     ###
+	0x30, 0xE0, //   ##    ###
+	0x7F, 0xC0, //  #########
+	0x7F, 0x80, //  ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1480 'E' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x18, 0x30, //    ##     ##
+	0x18, 0x30, //    ##     ##
+	0x19, 0x80, //    ##  ##
+	0x1F, 0x80, //    ######
+	0x1F, 0x80, //    ######
+	0x19, 0x80, //    ##  ##
+	0x18, 0x30, //    ##     ##
+	0x18, 0x30, //    ##     ##
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1520 'F' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x18, 0x30, //    ##     ##
+	0x18, 0x30, //    ##     ##
+	0x19, 0x80, //    ##  ##
+	0x1F, 0x80, //    ######
+	0x1F, 0x80, //    ######
+	0x19, 0x80, //    ##  ##
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x3F, 0x00, //   ######
+	0x3F, 0x00, //   ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1560 'G' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0xB0, //      #### ##
+	0x1F, 0xF0, //    #########
+	0x18, 0x70, //    ##    ###
+	0x30, 0x30, //   ##      ##
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x31, 0xF8, //   ##   ######
+	0x31, 0xF8, //   ##   ######
+	0x30, 0x30, //   ##      ##
+	0x18, 0x30, //    ##     ##
+	0x1F, 0xF0, //    #########
+	0x07, 0xC0, //      #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1600 'H' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1640 'I' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1680 'J' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x03, 0xF8, //       #######
+	0x03, 0xF8, //       #######
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x30, 0xE0, //   ##    ###
+	0x3F, 0xC0, //   ########
+	0x0F, 0x80, //     #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1720 'K' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3E, 0xF8, //   ##### #####
+	0x3E, 0xF8, //   ##### #####
+	0x18, 0xE0, //    ##   ###
+	0x19, 0x80, //    ##  ##
+	0x1B, 0x00, //    ## ##
+	0x1F, 0x00, //    #####
+	0x1D, 0x80, //    ### ##
+	0x18, 0xC0, //    ##   ##
+	0x18, 0xC0, //    ##   ##
+	0x18, 0x60, //    ##    ##
+	0x3E, 0x78, //   #####  ####
+	0x3E, 0x38, //   #####   ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1760 'L' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0x00, //   ######
+	0x3F, 0x00, //   ######
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x30, //     ##    ##
+	0x0C, 0x30, //     ##    ##
+	0x0C, 0x30, //     ##    ##
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1800 'M' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x78, 0x78, //  ####    ####
+	0x78, 0x78, //  ####    ####
+	0x38, 0x70, //   ###    ###
+	0x3C, 0xF0, //   ####  ####
+	0x34, 0xB0, //   ## #  # ##
+	0x37, 0xB0, //   ## #### ##
+	0x37, 0xB0, //   ## #### ##
+	0x33, 0x30, //   ##  ##  ##
+	0x33, 0x30, //   ##  ##  ##
+	0x30, 0x30, //   ##      ##
+	0x7C, 0xF8, //  #####  #####
+	0x7C, 0xF8, //  #####  #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1840 'N' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x39, 0xF0, //   ###  #####
+	0x3D, 0xF0, //   #### #####
+	0x1C, 0x60, //    ###   ##
+	0x1E, 0x60, //    ####  ##
+	0x1E, 0x60, //    ####  ##
+	0x1B, 0x60, //    ## ## ##
+	0x1B, 0x60, //    ## ## ##
+	0x19, 0xE0, //    ##  ####
+	0x19, 0xE0, //    ##  ####
+	0x18, 0xE0, //    ##   ###
+	0x3E, 0xE0, //   ##### ###
+	0x3E, 0x60, //   #####  ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1880 'O' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0x80, //      ####
+	0x0F, 0xC0, //     ######
+	0x1C, 0xE0, //    ###  ###
+	0x38, 0x70, //   ###    ###
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x38, 0x70, //   ###    ###
+	0x1C, 0xE0, //    ###  ###
+	0x0F, 0xC0, //     ######
+	0x07, 0x80, //      ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1920 'P' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0xC0, //   ########
+	0x3F, 0xE0, //   #########
+	0x18, 0x70, //    ##    ###
+	0x18, 0x30, //    ##     ##
+	0x18, 0x30, //    ##     ##
+	0x18, 0x70, //    ##    ###
+	0x1F, 0xE0, //    ########
+	0x1F, 0xC0, //    #######
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x3F, 0x00, //   ######
+	0x3F, 0x00, //   ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @1960 'Q' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0x80, //      ####
+	0x0F, 0xC0, //     ######
+	0x1C, 0xE0, //    ###  ###
+	0x38, 0x70, //   ###    ###
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x38, 0x70, //   ###    ###
+	0x1C, 0xE0, //    ###  ###
+	0x0F, 0xC0, //     ######
+	0x07, 0x80, //      ####
+	0x07, 0xB0, //      #### ##
+	0x0F, 0xF0, //     ########
+	0x0C, 0xE0, //     ##  ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2000 'R' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0xC0, //   ########
+	0x3F, 0xE0, //   #########
+	0x18, 0x70, //    ##    ###
+	0x18, 0x30, //    ##     ##
+	0x18, 0x70, //    ##    ###
+	0x1F, 0xE0, //    ########
+	0x1F, 0xC0, //    #######
+	0x18, 0xE0, //    ##   ###
+	0x18, 0x60, //    ##    ##
+	0x18, 0x70, //    ##    ###
+	0x3E, 0x38, //   #####   ###
+	0x3E, 0x18, //   #####    ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2040 'S' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0F, 0xB0, //     ##### ##
+	0x1F, 0xF0, //    #########
+	0x38, 0x70, //   ###    ###
+	0x30, 0x30, //   ##      ##
+	0x38, 0x00, //   ###
+	0x1F, 0x80, //    ######
+	0x07, 0xE0, //      ######
+	0x00, 0x70, //          ###
+	0x30, 0x30, //   ##      ##
+	0x38, 0x70, //   ###    ###
+	0x3F, 0xE0, //   #########
+	0x37, 0xC0, //   ## #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2080 'T' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x33, 0x30, //   ##  ##  ##
+	0x33, 0x30, //   ##  ##  ##
+	0x33, 0x30, //   ##  ##  ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x0F, 0xC0, //     ######
+	0x0F, 0xC0, //     ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2120 'U' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x1C, 0xE0, //    ###  ###
+	0x0F, 0xC0, //     ######
+	0x07, 0x80, //      ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2160 'V' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x78, 0xF0, //  ####   ####
+	0x78, 0xF0, //  ####   ####
+	0x30, 0x60, //   ##     ##
+	0x30, 0x60, //   ##     ##
+	0x18, 0xC0, //    ##   ##
+	0x18, 0xC0, //    ##   ##
+	0x0D, 0x80, //     ## ##
+	0x0D, 0x80, //     ## ##
+	0x0D, 0x80, //     ## ##
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2200 'W' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7C, 0x7C, //  #####   #####
+	0x7C, 0x7C, //  #####   #####
+	0x30, 0x18, //   ##       ##
+	0x33, 0x98, //   ##  ###  ##
+	0x33, 0x98, //   ##  ###  ##
+	0x33, 0x98, //   ##  ###  ##
+	0x36, 0xD8, //   ## ## ## ##
+	0x16, 0xD0, //    # ## ## #
+	0x1C, 0x70, //    ###   ###
+	0x1C, 0x70, //    ###   ###
+	0x1C, 0x70, //    ###   ###
+	0x18, 0x30, //    ##     ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2240 'X' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x78, 0xF0, //  ####   ####
+	0x78, 0xF0, //  ####   ####
+	0x30, 0x60, //   ##     ##
+	0x18, 0xC0, //    ##   ##
+	0x0D, 0x80, //     ## ##
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x0D, 0x80, //     ## ##
+	0x18, 0xC0, //    ##   ##
+	0x30, 0x60, //   ##     ##
+	0x78, 0xF0, //  ####   ####
+	0x78, 0xF0, //  ####   ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2280 'Y' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x18, 0x60, //    ##    ##
+	0x0C, 0xC0, //     ##  ##
+	0x07, 0x80, //      ####
+	0x07, 0x80, //      ####
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x0F, 0xC0, //     ######
+	0x0F, 0xC0, //     ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2320 'Z' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x18, 0x60, //    ##    ##
+	0x18, 0xC0, //    ##   ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x0C, 0x60, //     ##   ##
+	0x18, 0x60, //    ##    ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2360 '[' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0xC0, //       ####
+	0x03, 0xC0, //       ####
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0xC0, //       ####
+	0x03, 0xC0, //       ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2400 '\' (14 pixels wide)
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x01, 0x80, //        ##
+	0x01, 0x80, //        ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0x60, //          ##
+	0x00, 0x60, //          ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2440 ']' (14 pixels wide)
+	0x00, 0x00, //
+	0x0F, 0x00, //     ####
+	0x0F, 0x00, //     ####
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x0F, 0x00, //     ####
+	0x0F, 0x00, //     ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2480 '^' (14 pixels wide)
+	0x00, 0x00, //
+	0x02, 0x00, //       #
+	0x07, 0x00, //      ###
+	0x0D, 0x80, //     ## ##
+	0x18, 0xC0, //    ##   ##
+	0x30, 0x60, //   ##     ##
+	0x20, 0x20, //   #       #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2520 '_' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0xFF, 0xFC, // ##############
+	0xFF, 0xFC, // ##############
+
+	// @2560 '`' (14 pixels wide)
+	0x00, 0x00, //
+	0x04, 0x00, //      #
+	0x03, 0x00, //       ##
+	0x00, 0x80, //         #
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2600 'a' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0F, 0xC0, //     ######
+	0x1F, 0xE0, //    ########
+	0x00, 0x60, //          ##
+	0x0F, 0xE0, //     #######
+	0x1F, 0xE0, //    ########
+	0x38, 0x60, //   ###    ##
+	0x30, 0xE0, //   ##    ###
+	0x3F, 0xF0, //   ##########
+	0x1F, 0x70, //    ##### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2640 'b' (14 pixels wide)
+	0x00, 0x00, //
+	0x70, 0x00, //  ###
+	0x70, 0x00, //  ###
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x37, 0x80, //   ## ####
+	0x3F, 0xE0, //   #########
+	0x38, 0x60, //   ###    ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x38, 0x60, //   ###    ##
+	0x7F, 0xE0, //  ##########
+	0x77, 0x80, //  ### ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2680 'c' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0xB0, //      #### ##
+	0x1F, 0xF0, //    #########
+	0x18, 0x30, //    ##     ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x38, 0x30, //   ###     ##
+	0x1F, 0xF0, //    #########
+	0x0F, 0xC0, //     ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2720 'd' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x70, //          ###
+	0x00, 0x70, //          ###
+	0x00, 0x30, //           ##
+	0x00, 0x30, //           ##
+	0x07, 0xB0, //      #### ##
+	0x1F, 0xF0, //    #########
+	0x18, 0x70, //    ##    ###
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x38, 0x70, //   ###    ###
+	0x1F, 0xF8, //    ##########
+	0x07, 0xB8, //      #### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2760 'e' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0x80, //      ####
+	0x1F, 0xE0, //    ########
+	0x18, 0x60, //    ##    ##
+	0x3F, 0xF0, //   ##########
+	0x3F, 0xF0, //   ##########
+	0x30, 0x00, //   ##
+	0x18, 0x30, //    ##     ##
+	0x1F, 0xF0, //    #########
+	0x07, 0xC0, //      #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2800 'f' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0xF0, //       ######
+	0x07, 0xF0, //      #######
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2840 'g' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0xB8, //      #### ###
+	0x1F, 0xF8, //    ##########
+	0x18, 0x70, //    ##    ###
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x18, 0x70, //    ##    ###
+	0x1F, 0xF0, //    #########
+	0x07, 0xB0, //      #### ##
+	0x00, 0x30, //           ##
+	0x00, 0x70, //          ###
+	0x0F, 0xE0, //     #######
+	0x0F, 0xC0, //     ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2880 'h' (14 pixels wide)
+	0x00, 0x00, //
+	0x38, 0x00, //   ###
+	0x38, 0x00, //   ###
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x1B, 0xC0, //    ## ####
+	0x1F, 0xE0, //    ########
+	0x1C, 0x60, //    ###   ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2920 'i' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x1F, 0x00, //    #####
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @2960 'j' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0xC0, //    #######
+	0x1F, 0xC0, //    #######
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x00, 0xC0, //         ##
+	0x01, 0xC0, //        ###
+	0x3F, 0x80, //   #######
+	0x3F, 0x00, //   ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3000 'k' (14 pixels wide)
+	0x00, 0x00, //
+	0x38, 0x00, //   ###
+	0x38, 0x00, //   ###
+	0x18, 0x00, //    ##
+	0x18, 0x00, //    ##
+	0x1B, 0xE0, //    ## #####
+	0x1B, 0xE0, //    ## #####
+	0x1B, 0x00, //    ## ##
+	0x1E, 0x00, //    ####
+	0x1E, 0x00, //    ####
+	0x1B, 0x00, //    ## ##
+	0x19, 0x80, //    ##  ##
+	0x39, 0xF0, //   ###  #####
+	0x39, 0xF0, //   ###  #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3040 'l' (14 pixels wide)
+	0x00, 0x00, //
+	0x1F, 0x00, //    #####
+	0x1F, 0x00, //    #####
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3080 'm' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x7E, 0xE0, //  ###### ###
+	0x7F, 0xF0, //  ###########
+	0x33, 0x30, //   ##  ##  ##
+	0x33, 0x30, //   ##  ##  ##
+	0x33, 0x30, //   ##  ##  ##
+	0x33, 0x30, //   ##  ##  ##
+	0x33, 0x30, //   ##  ##  ##
+	0x7B, 0xB8, //  #### ### ###
+	0x7B, 0xB8, //  #### ### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3120 'n' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3B, 0xC0, //   ### ####
+	0x3F, 0xE0, //   #########
+	0x1C, 0x60, //    ###   ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3160 'o' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0x80, //      ####
+	0x1F, 0xE0, //    ########
+	0x18, 0x60, //    ##    ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x18, 0x60, //    ##    ##
+	0x1F, 0xE0, //    ########
+	0x07, 0x80, //      ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3200 'p' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x77, 0x80, //  ### ####
+	0x7F, 0xE0, //  ##########
+	0x38, 0x60, //   ###    ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x38, 0x60, //   ###    ##
+	0x3F, 0xE0, //   #########
+	0x37, 0x80, //   ## ####
+	0x30, 0x00, //   ##
+	0x30, 0x00, //   ##
+	0x7C, 0x00, //  #####
+	0x7C, 0x00, //  #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3240 'q' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0xB8, //      #### ###
+	0x1F, 0xF8, //    ##########
+	0x18, 0x70, //    ##    ###
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x30, 0x30, //   ##      ##
+	0x18, 0x70, //    ##    ###
+	0x1F, 0xF0, //    #########
+	0x07, 0xB0, //      #### ##
+	0x00, 0x30, //           ##
+	0x00, 0x30, //           ##
+	0x00, 0xF8, //         #####
+	0x00, 0xF8, //         #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3280 'r' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3C, 0xE0, //   ####  ###
+	0x3D, 0xF0, //   #### #####
+	0x0F, 0x30, //     ####  ##
+	0x0E, 0x00, //     ###
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x3F, 0xC0, //   ########
+	0x3F, 0xC0, //   ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3320 's' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x07, 0xE0, //      ######
+	0x1F, 0xE0, //    ########
+	0x18, 0x60, //    ##    ##
+	0x1E, 0x00, //    ####
+	0x0F, 0xC0, //     ######
+	0x01, 0xE0, //        ####
+	0x18, 0x60, //    ##    ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0x80, //    ######
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3360 't' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x3F, 0xE0, //   #########
+	0x3F, 0xE0, //   #########
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x00, //     ##
+	0x0C, 0x30, //     ##    ##
+	0x0F, 0xF0, //     ########
+	0x07, 0xC0, //      #####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3400 'u' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x38, 0xE0, //   ###   ###
+	0x38, 0xE0, //   ###   ###
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0x60, //    ##    ##
+	0x18, 0xE0, //    ##   ###
+	0x1F, 0xF0, //    #########
+	0x0F, 0x70, //     #### ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3440 'v' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x78, 0xF0, //  ####   ####
+	0x78, 0xF0, //  ####   ####
+	0x30, 0x60, //   ##     ##
+	0x18, 0xC0, //    ##   ##
+	0x18, 0xC0, //    ##   ##
+	0x0D, 0x80, //     ## ##
+	0x0D, 0x80, //     ## ##
+	0x07, 0x00, //      ###
+	0x07, 0x00, //      ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3480 'w' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x78, 0xF0, //  ####   ####
+	0x78, 0xF0, //  ####   ####
+	0x32, 0x60, //   ##  #  ##
+	0x32, 0x60, //   ##  #  ##
+	0x37, 0xE0, //   ## ######
+	0x1D, 0xC0, //    ### ###
+	0x1D, 0xC0, //    ### ###
+	0x18, 0xC0, //    ##   ##
+	0x18, 0xC0, //    ##   ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3520 'x' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x0C, 0xC0, //     ##  ##
+	0x07, 0x80, //      ####
+	0x03, 0x00, //       ##
+	0x07, 0x80, //      ####
+	0x0C, 0xC0, //     ##  ##
+	0x3C, 0xF0, //   ####  ####
+	0x3C, 0xF0, //   ####  ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3560 'y' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x78, 0xF0, //  ####   ####
+	0x78, 0xF0, //  ####   ####
+	0x30, 0x60, //   ##     ##
+	0x18, 0xC0, //    ##   ##
+	0x18, 0xC0, //    ##   ##
+	0x0D, 0x80, //     ## ##
+	0x0F, 0x80, //     #####
+	0x07, 0x00, //      ###
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x0C, 0x00, //     ##
+	0x7F, 0x00, //  #######
+	0x7F, 0x00, //  #######
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3600 'z' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x18, 0xC0, //    ##   ##
+	0x01, 0x80, //        ##
+	0x03, 0x00, //       ##
+	0x06, 0x00, //      ##
+	0x0C, 0x60, //     ##   ##
+	0x1F, 0xE0, //    ########
+	0x1F, 0xE0, //    ########
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3640 '{' (14 pixels wide)
+	0x00, 0x00, //
+	0x01, 0xC0, //        ###
+	0x03, 0xC0, //       ####
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x07, 0x00, //      ###
+	0x0E, 0x00, //     ###
+	0x07, 0x00, //      ###
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0xC0, //       ####
+	0x01, 0xC0, //        ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3680 '|' (14 pixels wide)
+	0x00, 0x00, //
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x03, 0x00, //       ##
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3720 '}' (14 pixels wide)
+	0x00, 0x00, //
+	0x1C, 0x00, //    ###
+	0x1E, 0x00, //    ####
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x07, 0x00, //      ###
+	0x03, 0x80, //       ###
+	0x07, 0x00, //      ###
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x06, 0x00, //      ##
+	0x1E, 0x00, //    ####
+	0x1C, 0x00, //    ###
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+
+	// @3760 '~' (14 pixels wide)
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x0E, 0x00, //     ###
+	0x3F, 0x30, //   ######  ##
+	0x33, 0xF0, //   ##  ######
+	0x01, 0xE0, //        ####
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+	0x00, 0x00, //
+};
+
+
+sFONT Font20 = {
+  Font20_Table,
+  14, /* Width */
+  20, /* Height */
+};
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/Fonts/font24.c b/USB-PD_Provider_1port/Utilities/Fonts/font24.c
new file mode 100644
index 0000000..02058c2
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/Fonts/font24.c
@@ -0,0 +1,2582 @@
+/**
+  ******************************************************************************
+  * @file    font24.c
+  * @author  MCD Application Team
+  * @brief   This file provides text font24 for STM32 board's LCD driver.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2014 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+  * @{
+  */
+  
+/** @addtogroup STM32_EVAL
+  * @{
+  */ 
+
+/** @addtogroup Common
+  * @{
+  */
+
+/** @addtogroup FONTS
+  * @brief      This file provides text font24 for STM32xx-EVAL's LCD driver.
+  * @{
+  */  
+
+/** @defgroup FONTS_Private_Types
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Defines
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Macros
+  * @{
+  */
+/**
+  * @}
+  */ 
+  
+
+/** @defgroup FONTS_Private_Variables
+  * @{
+  */
+const uint8_t Font24_Table [] = 
+{
+	// @0 ' ' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @72 '!' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x01, 0x00, 0x00, //        #         
+	0x01, 0x00, 0x00, //        #         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @144 '"' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x0E, 0x70, 0x00, //     ###  ###     
+	0x0E, 0x70, 0x00, //     ###  ###     
+	0x0E, 0x70, 0x00, //     ###  ###     
+	0x04, 0x20, 0x00, //      #    #      
+	0x04, 0x20, 0x00, //      #    #      
+	0x04, 0x20, 0x00, //      #    #      
+	0x04, 0x20, 0x00, //      #    #      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @216 '#' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @288 '$' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x07, 0xB0, 0x00, //      #### ##     
+	0x0F, 0xF0, 0x00, //     ########     
+	0x18, 0x70, 0x00, //    ##    ###     
+	0x18, 0x70, 0x00, //    ##    ###     
+	0x1C, 0x00, 0x00, //    ###           
+	0x0F, 0x80, 0x00, //     #####        
+	0x07, 0xE0, 0x00, //      ######      
+	0x00, 0xF0, 0x00, //         ####     
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x1C, 0x30, 0x00, //    ###    ##     
+	0x1C, 0x70, 0x00, //    ###   ###     
+	0x1F, 0xE0, 0x00, //    ########      
+	0x1B, 0xC0, 0x00, //    ## ####       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @360 '%' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0x80, 0x00, //      ####        
+	0x0F, 0xC0, 0x00, //     ######       
+	0x1C, 0xE0, 0x00, //    ###  ###      
+	0x18, 0x60, 0x00, //    ##    ##      
+	0x18, 0x60, 0x00, //    ##    ##      
+	0x1C, 0xE0, 0x00, //    ###  ###      
+	0x0F, 0xF8, 0x00, //     #########    
+	0x07, 0xE0, 0x00, //      ######      
+	0x1F, 0xF0, 0x00, //    #########     
+	0x07, 0x38, 0x00, //      ###  ###    
+	0x06, 0x18, 0x00, //      ##    ##    
+	0x06, 0x18, 0x00, //      ##    ##    
+	0x07, 0x38, 0x00, //      ###  ###    
+	0x03, 0xF0, 0x00, //       ######     
+	0x01, 0xE0, 0x00, //        ####      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @432 '&' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xF0, 0x00, //       ######     
+	0x07, 0xF0, 0x00, //      #######     
+	0x0C, 0x60, 0x00, //     ##   ##      
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x06, 0x00, 0x00, //      ##          
+	0x07, 0x00, 0x00, //      ###         
+	0x0F, 0x9C, 0x00, //     #####  ###   
+	0x1D, 0xFC, 0x00, //    ### #######   
+	0x18, 0xF0, 0x00, //    ##   ####     
+	0x18, 0x70, 0x00, //    ##    ###     
+	0x0F, 0xFC, 0x00, //     ##########   
+	0x07, 0xDC, 0x00, //      ##### ###   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @504 ''' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x01, 0x00, 0x00, //        #         
+	0x01, 0x00, 0x00, //        #         
+	0x01, 0x00, 0x00, //        #         
+	0x01, 0x00, 0x00, //        #         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @576 '(' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x38, 0x00, //           ###    
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0xF0, 0x00, //         ####     
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0xE0, 0x00, //         ###      
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0xC0, 0x00, //        ###       
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0x38, 0x00, //           ###    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @648 ')' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x18, 0x00, 0x00, //    ##            
+	0x1C, 0x00, 0x00, //    ###           
+	0x0E, 0x00, 0x00, //     ###          
+	0x0E, 0x00, 0x00, //     ###          
+	0x07, 0x00, 0x00, //      ###         
+	0x07, 0x00, 0x00, //      ###         
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x80, 0x00, //       ###        
+	0x07, 0x00, 0x00, //      ###         
+	0x07, 0x00, 0x00, //      ###         
+	0x0F, 0x00, 0x00, //     ####         
+	0x0E, 0x00, 0x00, //     ###          
+	0x1C, 0x00, 0x00, //    ###           
+	0x18, 0x00, 0x00, //    ##            
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @720 '*' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x1D, 0xB8, 0x00, //    ### ## ###    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x07, 0xE0, 0x00, //      ######      
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @792 '+' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x3F, 0xFC, 0x00, //   ############   
+	0x3F, 0xFC, 0x00, //   ############   
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @864 ',' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0xC0, 0x00, //         ##       
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0x00, 0x00, //       ##         
+	0x03, 0x00, 0x00, //       ##         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @936 '-' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1008 '.' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1080 '/' (17 pixels wide)
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x38, 0x00, //           ###    
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0x60, 0x00, //          ##      
+	0x00, 0x60, 0x00, //          ##      
+	0x00, 0xC0, 0x00, //         ##       
+	0x00, 0xC0, 0x00, //         ##       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0x00, 0x00, //       ##         
+	0x03, 0x00, 0x00, //       ##         
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x0E, 0x00, 0x00, //     ###          
+	0x0C, 0x00, 0x00, //     ##           
+	0x1C, 0x00, 0x00, //    ###           
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1152 '0' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x07, 0xE0, 0x00, //      ######      
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x07, 0xE0, 0x00, //      ######      
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1224 '1' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x80, 0x00, //         #        
+	0x07, 0x80, 0x00, //      ####        
+	0x1F, 0x80, 0x00, //    ######        
+	0x1D, 0x80, 0x00, //    ### ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1296 '2' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xC0, 0x00, //      #####       
+	0x1F, 0xF0, 0x00, //    #########     
+	0x38, 0x30, 0x00, //   ###     ##     
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x60, 0x00, //          ##      
+	0x01, 0xC0, 0x00, //        ###       
+	0x03, 0x80, 0x00, //       ###        
+	0x06, 0x00, 0x00, //      ##          
+	0x0C, 0x00, 0x00, //     ##           
+	0x18, 0x00, 0x00, //    ##            
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1368 '3' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x0F, 0xE0, 0x00, //     #######      
+	0x0C, 0x70, 0x00, //     ##   ###     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x60, 0x00, //          ##      
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xE0, 0x00, //       #####      
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x1F, 0xF0, 0x00, //    #########     
+	0x0F, 0xC0, 0x00, //     ######       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1440 '4' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0xE0, 0x00, //         ###      
+	0x01, 0xE0, 0x00, //        ####      
+	0x01, 0xE0, 0x00, //        ####      
+	0x03, 0x60, 0x00, //       ## ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x0C, 0x60, 0x00, //     ##   ##      
+	0x0C, 0x60, 0x00, //     ##   ##      
+	0x18, 0x60, 0x00, //    ##    ##      
+	0x30, 0x60, 0x00, //   ##     ##      
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x00, 0x60, 0x00, //          ##      
+	0x03, 0xF8, 0x00, //       #######    
+	0x03, 0xF8, 0x00, //       #######    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1512 '5' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1F, 0xF0, 0x00, //    #########     
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x1B, 0xC0, 0x00, //    ## ####       
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1C, 0x30, 0x00, //    ###    ##     
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x30, 0x30, 0x00, //   ##      ##     
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x0F, 0xC0, 0x00, //     ######       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1584 '6' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0xF8, 0x00, //         #####    
+	0x03, 0xF8, 0x00, //       #######    
+	0x07, 0x00, 0x00, //      ###         
+	0x0E, 0x00, 0x00, //     ###          
+	0x0C, 0x00, 0x00, //     ##           
+	0x18, 0x00, 0x00, //    ##            
+	0x1B, 0xC0, 0x00, //    ## ####       
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1C, 0x30, 0x00, //    ###    ##     
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x38, 0x00, //     ##    ###    
+	0x0F, 0xF0, 0x00, //     ########     
+	0x03, 0xE0, 0x00, //       #####      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1656 '7' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0x60, 0x00, //          ##      
+	0x00, 0x60, 0x00, //          ##      
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0xC0, 0x00, //         ##       
+	0x00, 0xC0, 0x00, //         ##       
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1728 '8' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xE0, 0x00, //      ######      
+	0x0F, 0xF0, 0x00, //     ########     
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x07, 0xE0, 0x00, //      ######      
+	0x07, 0xE0, 0x00, //      ######      
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x0F, 0xF0, 0x00, //     ########     
+	0x07, 0xE0, 0x00, //      ######      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1800 '9' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xC0, 0x00, //      #####       
+	0x0F, 0xF0, 0x00, //     ########     
+	0x1C, 0x30, 0x00, //    ###    ##     
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x38, 0x00, //     ##    ###    
+	0x0F, 0xF8, 0x00, //     #########    
+	0x03, 0xD8, 0x00, //       #### ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0xE0, 0x00, //         ###      
+	0x1F, 0xC0, 0x00, //    #######       
+	0x1F, 0x00, 0x00, //    #####         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1872 ':' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @1944 ';' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0xF0, 0x00, //         ####     
+	0x00, 0xF0, 0x00, //         ####     
+	0x00, 0xF0, 0x00, //         ####     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0xE0, 0x00, //         ###      
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0x00, 0x00, //       ##         
+	0x02, 0x00, 0x00, //       #          
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2016 '<' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x1C, 0x00, //            ###   
+	0x00, 0x3C, 0x00, //           ####   
+	0x00, 0xF0, 0x00, //         ####     
+	0x03, 0xC0, 0x00, //       ####       
+	0x0F, 0x00, 0x00, //     ####         
+	0x3C, 0x00, 0x00, //   ####           
+	0xF0, 0x00, 0x00, // ####             
+	0x3C, 0x00, 0x00, //   ####           
+	0x0F, 0x00, 0x00, //     ####         
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0xF0, 0x00, //         ####     
+	0x00, 0x3C, 0x00, //           ####   
+	0x00, 0x1C, 0x00, //            ###   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2088 '=' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0xFC, 0x00, //  #############   
+	0x7F, 0xFC, 0x00, //  #############   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0xFC, 0x00, //  #############   
+	0x7F, 0xFC, 0x00, //  #############   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2160 '>' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x70, 0x00, 0x00, //  ###             
+	0x78, 0x00, 0x00, //  ####            
+	0x1E, 0x00, 0x00, //    ####          
+	0x07, 0x80, 0x00, //      ####        
+	0x01, 0xE0, 0x00, //        ####      
+	0x00, 0x78, 0x00, //          ####    
+	0x00, 0x1E, 0x00, //            ####  
+	0x00, 0x78, 0x00, //          ####    
+	0x01, 0xE0, 0x00, //        ####      
+	0x07, 0x80, 0x00, //      ####        
+	0x1E, 0x00, 0x00, //    ####          
+	0x78, 0x00, 0x00, //  ####            
+	0x70, 0x00, 0x00, //  ###             
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2232 '?' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xC0, 0x00, //      #####       
+	0x0F, 0xE0, 0x00, //     #######      
+	0x18, 0x70, 0x00, //    ##    ###     
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0xE0, 0x00, //         ###      
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0x80, 0x00, //       ###        
+	0x03, 0x00, 0x00, //       ##         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0x00, 0x00, //      ###         
+	0x07, 0x00, 0x00, //      ###         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2304 '@' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xE0, 0x00, //       #####      
+	0x07, 0xF0, 0x00, //      #######     
+	0x0E, 0x38, 0x00, //     ###   ###    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x18, 0x78, 0x00, //    ##    ####    
+	0x18, 0xF8, 0x00, //    ##   #####    
+	0x19, 0xD8, 0x00, //    ##  ### ##    
+	0x19, 0x98, 0x00, //    ##  ##  ##    
+	0x19, 0x98, 0x00, //    ##  ##  ##    
+	0x19, 0x98, 0x00, //    ##  ##  ##    
+	0x18, 0xF8, 0x00, //    ##   #####    
+	0x18, 0x78, 0x00, //    ##    ####    
+	0x18, 0x00, 0x00, //    ##            
+	0x0C, 0x00, 0x00, //     ##           
+	0x0E, 0x18, 0x00, //     ###    ##    
+	0x07, 0xF8, 0x00, //      ########    
+	0x03, 0xE0, 0x00, //       #####      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2376 'A' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0x80, 0x00, //    ######        
+	0x1F, 0xC0, 0x00, //    #######       
+	0x01, 0xC0, 0x00, //        ###       
+	0x03, 0x60, 0x00, //       ## ##      
+	0x03, 0x60, 0x00, //       ## ##      
+	0x06, 0x30, 0x00, //      ##   ##     
+	0x06, 0x30, 0x00, //      ##   ##     
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x0F, 0xF8, 0x00, //     #########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0xFC, 0x7F, 0x00, // ######   ####### 
+	0xFC, 0x7F, 0x00, // ######   ####### 
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2448 'B' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0xE0, 0x00, //  ##########      
+	0x7F, 0xF0, 0x00, //  ###########     
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x1C, 0x00, //    ##      ###   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x7F, 0xF8, 0x00, //  ############    
+	0x7F, 0xF0, 0x00, //  ###########     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2520 'C' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xEC, 0x00, //       ##### ##   
+	0x0F, 0xFC, 0x00, //     ##########   
+	0x1C, 0x1C, 0x00, //    ###     ###   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0x00, 0x00, //   ##             
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x1C, 0x1C, 0x00, //    ###     ###   
+	0x0F, 0xF8, 0x00, //     #########    
+	0x03, 0xF0, 0x00, //       ######     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2592 'D' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0xC0, 0x00, //  #########       
+	0x7F, 0xF0, 0x00, //  ###########     
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x7F, 0xF0, 0x00, //  ###########     
+	0x7F, 0xE0, 0x00, //  ##########      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2664 'E' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0xF8, 0x00, //  ############    
+	0x7F, 0xF8, 0x00, //  ############    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x19, 0x98, 0x00, //    ##  ##  ##    
+	0x19, 0x80, 0x00, //    ##  ##        
+	0x1F, 0x80, 0x00, //    ######        
+	0x1F, 0x80, 0x00, //    ######        
+	0x19, 0x80, 0x00, //    ##  ##        
+	0x19, 0x98, 0x00, //    ##  ##  ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x7F, 0xF8, 0x00, //  ############    
+	0x7F, 0xF8, 0x00, //  ############    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2736 'F' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x3F, 0xFC, 0x00, //   ############   
+	0x3F, 0xFC, 0x00, //   ############   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0xCC, 0x00, //     ##  ##  ##   
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0F, 0xC0, 0x00, //     ######       
+	0x0F, 0xC0, 0x00, //     ######       
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x3F, 0xC0, 0x00, //   ########       
+	0x3F, 0xC0, 0x00, //   ########       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2808 'G' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xEC, 0x00, //       ##### ##   
+	0x0F, 0xFC, 0x00, //     ##########   
+	0x1C, 0x1C, 0x00, //    ###     ###   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0xFE, 0x00, //   ##    #######  
+	0x30, 0xFE, 0x00, //   ##    #######  
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x38, 0x0C, 0x00, //   ###       ##   
+	0x1C, 0x1C, 0x00, //    ###     ###   
+	0x0F, 0xFC, 0x00, //     ##########   
+	0x03, 0xF0, 0x00, //       ######     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2880 'H' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @2952 'I' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3024 'J' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xFE, 0x00, //      ##########  
+	0x07, 0xFE, 0x00, //      ##########  
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x30, 0x30, 0x00, //   ##      ##     
+	0x30, 0x30, 0x00, //   ##      ##     
+	0x30, 0x30, 0x00, //   ##      ##     
+	0x30, 0x30, 0x00, //   ##      ##     
+	0x30, 0x60, 0x00, //   ##     ##      
+	0x3F, 0xE0, 0x00, //   #########      
+	0x0F, 0x80, 0x00, //     #####        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3096 'K' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0x3E, 0x00, //  #######  #####  
+	0x7F, 0x3E, 0x00, //  #######  #####  
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x18, 0x60, 0x00, //    ##    ##      
+	0x18, 0xC0, 0x00, //    ##   ##       
+	0x19, 0x80, 0x00, //    ##  ##        
+	0x1B, 0x80, 0x00, //    ## ###        
+	0x1F, 0xC0, 0x00, //    #######       
+	0x1C, 0xE0, 0x00, //    ###  ###      
+	0x18, 0x70, 0x00, //    ##    ###     
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x7F, 0x1F, 0x00, //  #######   ##### 
+	0x7F, 0x1F, 0x00, //  #######   ##### 
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3168 'L' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0x80, 0x00, //  ########        
+	0x7F, 0x80, 0x00, //  ########        
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x7F, 0xFC, 0x00, //  #############   
+	0x7F, 0xFC, 0x00, //  #############   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3240 'M' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0xF0, 0x0F, 0x00, // ####        #### 
+	0xF8, 0x1F, 0x00, // #####      ##### 
+	0x38, 0x1C, 0x00, //   ###      ###   
+	0x3C, 0x3C, 0x00, //   ####    ####   
+	0x3C, 0x3C, 0x00, //   ####    ####   
+	0x36, 0x6C, 0x00, //   ## ##  ## ##   
+	0x36, 0x6C, 0x00, //   ## ##  ## ##   
+	0x33, 0xCC, 0x00, //   ##  ####  ##   
+	0x33, 0xCC, 0x00, //   ##  ####  ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0xFE, 0x7F, 0x00, // #######  ####### 
+	0xFE, 0x7F, 0x00, // #######  ####### 
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3312 'N' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x78, 0xFE, 0x00, //  ####   #######  
+	0x78, 0xFE, 0x00, //  ####   #######  
+	0x1C, 0x18, 0x00, //    ###     ##    
+	0x1E, 0x18, 0x00, //    ####    ##    
+	0x1F, 0x18, 0x00, //    #####   ##    
+	0x1B, 0x18, 0x00, //    ## ##   ##    
+	0x1B, 0x98, 0x00, //    ## ###  ##    
+	0x19, 0xD8, 0x00, //    ##  ### ##    
+	0x18, 0xD8, 0x00, //    ##   ## ##    
+	0x18, 0xF8, 0x00, //    ##   #####    
+	0x18, 0x78, 0x00, //    ##    ####    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x7F, 0x18, 0x00, //  #######   ##    
+	0x7F, 0x18, 0x00, //  #######   ##    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3384 'O' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x0F, 0xF0, 0x00, //     ########     
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x38, 0x1C, 0x00, //   ###      ###   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x38, 0x1C, 0x00, //   ###      ###   
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x0F, 0xF0, 0x00, //     ########     
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3456 'P' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x0C, 0x1C, 0x00, //     ##     ###   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0x0C, 0x00, //     ##      ##   
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x0F, 0xF8, 0x00, //     #########    
+	0x0F, 0xE0, 0x00, //     #######      
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x3F, 0xC0, 0x00, //   ########       
+	0x3F, 0xC0, 0x00, //   ########       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3528 'Q' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x0F, 0xF0, 0x00, //     ########     
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x38, 0x1C, 0x00, //   ###      ###   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x38, 0x1C, 0x00, //   ###      ###   
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x0F, 0xF0, 0x00, //     ########     
+	0x07, 0xC0, 0x00, //      #####       
+	0x07, 0xCC, 0x00, //      #####  ##   
+	0x0F, 0xFC, 0x00, //     ##########   
+	0x0C, 0x38, 0x00, //     ##    ###    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3600 'R' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0xE0, 0x00, //  ##########      
+	0x7F, 0xF0, 0x00, //  ###########     
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1F, 0xC0, 0x00, //    #######       
+	0x18, 0xE0, 0x00, //    ##   ###      
+	0x18, 0x70, 0x00, //    ##    ###     
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x7F, 0x1E, 0x00, //  #######   ####  
+	0x7F, 0x0E, 0x00, //  #######    ###  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3672 'S' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xD8, 0x00, //      ##### ##    
+	0x0F, 0xF8, 0x00, //     #########    
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x1E, 0x00, 0x00, //    ####          
+	0x0F, 0xC0, 0x00, //     ######       
+	0x03, 0xF0, 0x00, //       ######     
+	0x00, 0x78, 0x00, //          ####    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1B, 0xE0, 0x00, //    ## #####      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3744 'T' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x3F, 0xFC, 0x00, //   ############   
+	0x3F, 0xFC, 0x00, //   ############   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x0F, 0xF0, 0x00, //     ########     
+	0x0F, 0xF0, 0x00, //     ########     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3816 'U' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x0F, 0xF0, 0x00, //     ########     
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3888 'V' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7F, 0x7F, 0x00, //  ####### ####### 
+	0x7F, 0x7F, 0x00, //  ####### ####### 
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x06, 0x30, 0x00, //      ##   ##     
+	0x06, 0x30, 0x00, //      ##   ##     
+	0x03, 0x60, 0x00, //       ## ##      
+	0x03, 0x60, 0x00, //       ## ##      
+	0x03, 0x60, 0x00, //       ## ##      
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0xC0, 0x00, //        ###       
+	0x00, 0x80, 0x00, //         #        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @3960 'W' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0xFE, 0x3F, 0x80, // #######   #######
+	0xFE, 0x3F, 0x80, // #######   #######
+	0x30, 0x06, 0x00, //   ##         ##  
+	0x30, 0x06, 0x00, //   ##         ##  
+	0x30, 0x86, 0x00, //   ##    #    ##  
+	0x19, 0xCC, 0x00, //    ##  ###  ##   
+	0x19, 0xCC, 0x00, //    ##  ###  ##   
+	0x1B, 0x6C, 0x00, //    ## ## ## ##   
+	0x1B, 0x6C, 0x00, //    ## ## ## ##   
+	0x1E, 0x7C, 0x00, //    ####  #####   
+	0x0E, 0x38, 0x00, //     ###   ###    
+	0x0E, 0x38, 0x00, //     ###   ###    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4032 'X' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x03, 0xC0, 0x00, //       ####       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0xC0, 0x00, //       ####       
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4104 'Y' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7C, 0x7E, 0x00, //  #####   ######  
+	0x7C, 0x7E, 0x00, //  #####   ######  
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x03, 0xC0, 0x00, //       ####       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x0F, 0xF0, 0x00, //     ########     
+	0x0F, 0xF0, 0x00, //     ########     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4176 'Z' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x18, 0x60, 0x00, //    ##    ##      
+	0x18, 0xC0, 0x00, //    ##   ##       
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0x00, 0x00, //       ##         
+	0x06, 0x18, 0x00, //      ##    ##    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4248 '[' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x01, 0xF0, 0x00, //        #####     
+	0x01, 0xF0, 0x00, //        #####     
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0xF0, 0x00, //        #####     
+	0x01, 0xF0, 0x00, //        #####     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4320 '\' (17 pixels wide)
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x1C, 0x00, 0x00, //    ###           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0E, 0x00, 0x00, //     ###          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x03, 0x00, 0x00, //       ##         
+	0x03, 0x00, 0x00, //       ##         
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x00, 0xC0, 0x00, //         ##       
+	0x00, 0xC0, 0x00, //         ##       
+	0x00, 0x60, 0x00, //          ##      
+	0x00, 0x60, 0x00, //          ##      
+	0x00, 0x70, 0x00, //          ###     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x38, 0x00, //           ###    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4392 ']' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x0F, 0x80, 0x00, //     #####        
+	0x0F, 0x80, 0x00, //     #####        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x0F, 0x80, 0x00, //     #####        
+	0x0F, 0x80, 0x00, //     #####        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4464 '^' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x80, 0x00, //         #        
+	0x01, 0xC0, 0x00, //        ###       
+	0x03, 0xE0, 0x00, //       #####      
+	0x07, 0x70, 0x00, //      ### ###     
+	0x06, 0x30, 0x00, //      ##   ##     
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x10, 0x04, 0x00, //    #         #   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4536 '_' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0xFF, 0xFF, 0x00, // ################ 
+	0xFF, 0xFF, 0x00, // ################ 
+
+	// @4608 '`' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x03, 0x00, 0x00, //       ##         
+	0x03, 0x80, 0x00, //       ###        
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0x60, 0x00, //          ##      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4680 'a' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x0F, 0xC0, 0x00, //     ######       
+	0x1F, 0xE0, 0x00, //    ########      
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x07, 0xF0, 0x00, //      #######     
+	0x1F, 0xF0, 0x00, //    #########     
+	0x38, 0x30, 0x00, //   ###     ##     
+	0x30, 0x30, 0x00, //   ##      ##     
+	0x30, 0x70, 0x00, //   ##     ###     
+	0x1F, 0xFC, 0x00, //    ###########   
+	0x0F, 0xBC, 0x00, //     ##### ####   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4752 'b' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x78, 0x00, 0x00, //  ####            
+	0x78, 0x00, 0x00, //  ####            
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x1B, 0xE0, 0x00, //    ## #####      
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1C, 0x18, 0x00, //    ###     ##    
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x1C, 0x18, 0x00, //    ###     ##    
+	0x7F, 0xF8, 0x00, //  ############    
+	0x7B, 0xE0, 0x00, //  #### #####      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4824 'c' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xEC, 0x00, //       ##### ##   
+	0x0F, 0xFC, 0x00, //     ##########   
+	0x1C, 0x1C, 0x00, //    ###     ###   
+	0x38, 0x0C, 0x00, //   ###       ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0x00, 0x00, //   ##             
+	0x38, 0x0C, 0x00, //   ###       ##   
+	0x1C, 0x1C, 0x00, //    ###     ###   
+	0x0F, 0xF8, 0x00, //     #########    
+	0x03, 0xF0, 0x00, //       ######     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4896 'd' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x78, 0x00, //          ####    
+	0x00, 0x78, 0x00, //          ####    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x07, 0xD8, 0x00, //      ##### ##    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x1F, 0xFE, 0x00, //    ############  
+	0x07, 0xDE, 0x00, //      ##### ####  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @4968 'e' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xE0, 0x00, //      ######      
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x3F, 0xFC, 0x00, //   ############   
+	0x3F, 0xFC, 0x00, //   ############   
+	0x30, 0x00, 0x00, //   ##             
+	0x30, 0x00, 0x00, //   ##             
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x1F, 0xFC, 0x00, //    ###########   
+	0x07, 0xF0, 0x00, //      #######     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5040 'f' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x01, 0xFC, 0x00, //        #######   
+	0x03, 0xFC, 0x00, //       ########   
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x3F, 0xF8, 0x00, //   ###########    
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5112 'g' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xDE, 0x00, //      ##### ####  
+	0x1F, 0xFE, 0x00, //    ############  
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x07, 0xD8, 0x00, //      ##### ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x38, 0x00, //           ###    
+	0x0F, 0xF0, 0x00, //     ########     
+	0x0F, 0xC0, 0x00, //     ######       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5184 'h' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x78, 0x00, 0x00, //  ####            
+	0x78, 0x00, 0x00, //  ####            
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x1B, 0xE0, 0x00, //    ## #####      
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5256 'i' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0x80, 0x00, //    ######        
+	0x1F, 0x80, 0x00, //    ######        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x3F, 0xFC, 0x00, //   ############   
+	0x3F, 0xFC, 0x00, //   ############   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5328 'j' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0xC0, 0x00, //         ##       
+	0x00, 0xC0, 0x00, //         ##       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1F, 0xF0, 0x00, //    #########     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x30, 0x00, //           ##     
+	0x00, 0x70, 0x00, //          ###     
+	0x1F, 0xE0, 0x00, //    ########      
+	0x1F, 0x80, 0x00, //    ######        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5400 'k' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x3C, 0x00, 0x00, //   ####           
+	0x3C, 0x00, 0x00, //   ####           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0xF8, 0x00, //     ##  #####    
+	0x0C, 0xF8, 0x00, //     ##  #####    
+	0x0C, 0xC0, 0x00, //     ##  ##       
+	0x0D, 0x80, 0x00, //     ## ##        
+	0x0F, 0x80, 0x00, //     #####        
+	0x0F, 0x00, 0x00, //     ####         
+	0x0F, 0x80, 0x00, //     #####        
+	0x0D, 0xC0, 0x00, //     ## ###       
+	0x0C, 0xE0, 0x00, //     ##  ###      
+	0x3C, 0x7C, 0x00, //   ####   #####   
+	0x3C, 0x7C, 0x00, //   ####   #####   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5472 'l' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0x80, 0x00, //    ######        
+	0x1F, 0x80, 0x00, //    ######        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x3F, 0xFC, 0x00, //   ############   
+	0x3F, 0xFC, 0x00, //   ############   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5544 'm' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0xF7, 0x78, 0x00, // #### ### ####    
+	0xFF, 0xFC, 0x00, // ##############   
+	0x39, 0xCC, 0x00, //   ###  ###  ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0x31, 0x8C, 0x00, //   ##   ##   ##   
+	0xFD, 0xEF, 0x00, // ###### #### #### 
+	0xFD, 0xEF, 0x00, // ###### #### #### 
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5616 'n' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7B, 0xE0, 0x00, //  #### #####      
+	0x7F, 0xF0, 0x00, //  ###########     
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x7E, 0x7E, 0x00, //  ######  ######  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5688 'o' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x03, 0xC0, 0x00, //       ####       
+	0x0F, 0xF0, 0x00, //     ########     
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x38, 0x1C, 0x00, //   ###      ###   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x30, 0x0C, 0x00, //   ##        ##   
+	0x38, 0x1C, 0x00, //   ###      ###   
+	0x1C, 0x38, 0x00, //    ###    ###    
+	0x0F, 0xF0, 0x00, //     ########     
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5760 'p' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7B, 0xE0, 0x00, //  #### #####      
+	0x7F, 0xF8, 0x00, //  ############    
+	0x1C, 0x18, 0x00, //    ###     ##    
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x1C, 0x18, 0x00, //    ###     ##    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1B, 0xE0, 0x00, //    ## #####      
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x18, 0x00, 0x00, //    ##            
+	0x7F, 0x00, 0x00, //  #######         
+	0x7F, 0x00, 0x00, //  #######         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5832 'q' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xDE, 0x00, //      ##### ####  
+	0x1F, 0xFE, 0x00, //    ############  
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x30, 0x18, 0x00, //   ##       ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x07, 0xD8, 0x00, //      ##### ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0x18, 0x00, //            ##    
+	0x00, 0xFE, 0x00, //         #######  
+	0x00, 0xFE, 0x00, //         #######  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5904 'r' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x3E, 0x78, 0x00, //   #####  ####    
+	0x3E, 0xFC, 0x00, //   ##### ######   
+	0x07, 0xCC, 0x00, //      #####  ##   
+	0x07, 0x00, 0x00, //      ###         
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x06, 0x00, 0x00, //      ##          
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @5976 's' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0xF8, 0x00, //      ########    
+	0x0F, 0xF8, 0x00, //     #########    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x1F, 0x80, 0x00, //    ######        
+	0x0F, 0xF0, 0x00, //     ########     
+	0x00, 0xF8, 0x00, //         #####    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x1F, 0xF0, 0x00, //    #########     
+	0x1F, 0xE0, 0x00, //    ########      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6048 't' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x3F, 0xF0, 0x00, //   ##########     
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x00, 0x00, //     ##           
+	0x0C, 0x1C, 0x00, //     ##     ###   
+	0x07, 0xFC, 0x00, //      #########   
+	0x03, 0xF0, 0x00, //       ######     
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6120 'u' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x78, 0x78, 0x00, //  ####    ####    
+	0x78, 0x78, 0x00, //  ####    ####    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x38, 0x00, //    ##     ###    
+	0x0F, 0xFE, 0x00, //     ###########  
+	0x07, 0xDE, 0x00, //      ##### ####  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6192 'v' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7C, 0x3E, 0x00, //  #####    #####  
+	0x7C, 0x3E, 0x00, //  #####    #####  
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x18, 0x18, 0x00, //    ##      ##    
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x07, 0xE0, 0x00, //      ######      
+	0x03, 0xC0, 0x00, //       ####       
+	0x03, 0xC0, 0x00, //       ####       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6264 'w' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x78, 0x3C, 0x00, //  ####     ####   
+	0x78, 0x3C, 0x00, //  ####     ####   
+	0x31, 0x18, 0x00, //   ##   #   ##    
+	0x33, 0x98, 0x00, //   ##  ###  ##    
+	0x33, 0x98, 0x00, //   ##  ###  ##    
+	0x1A, 0xB0, 0x00, //    ## # # ##     
+	0x1E, 0xF0, 0x00, //    #### ####     
+	0x1E, 0xF0, 0x00, //    #### ####     
+	0x1C, 0x60, 0x00, //    ###   ##      
+	0x0C, 0x60, 0x00, //     ##   ##      
+	0x0C, 0x60, 0x00, //     ##   ##      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6336 'x' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x3E, 0x7C, 0x00, //   #####  #####   
+	0x3E, 0x7C, 0x00, //   #####  #####   
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x03, 0xC0, 0x00, //       ####       
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0xC0, 0x00, //       ####       
+	0x06, 0x60, 0x00, //      ##  ##      
+	0x0C, 0x30, 0x00, //     ##    ##     
+	0x3E, 0x7C, 0x00, //   #####  #####   
+	0x3E, 0x7C, 0x00, //   #####  #####   
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6408 'y' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x7E, 0x1F, 0x00, //  ######    ##### 
+	0x7E, 0x1F, 0x00, //  ######    ##### 
+	0x18, 0x0C, 0x00, //    ##       ##   
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x06, 0x30, 0x00, //      ##   ##     
+	0x06, 0x30, 0x00, //      ##   ##     
+	0x03, 0x60, 0x00, //       ## ##      
+	0x03, 0xE0, 0x00, //       #####      
+	0x01, 0xC0, 0x00, //        ###       
+	0x00, 0xC0, 0x00, //         ##       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0x00, 0x00, //       ##         
+	0x3F, 0xC0, 0x00, //   ########       
+	0x3F, 0xC0, 0x00, //   ########       
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6480 'z' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x18, 0x30, 0x00, //    ##     ##     
+	0x18, 0x60, 0x00, //    ##    ##      
+	0x00, 0xC0, 0x00, //         ##       
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0x00, 0x00, //       ##         
+	0x06, 0x18, 0x00, //      ##    ##    
+	0x0C, 0x18, 0x00, //     ##     ##    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x1F, 0xF8, 0x00, //    ##########    
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6552 '{' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0xE0, 0x00, //         ###      
+	0x01, 0xE0, 0x00, //        ####      
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x03, 0x80, 0x00, //       ###        
+	0x07, 0x00, 0x00, //      ###         
+	0x03, 0x80, 0x00, //       ###        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0xE0, 0x00, //        ####      
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6624 '|' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6696 '}' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x07, 0x00, 0x00, //      ###         
+	0x07, 0x80, 0x00, //      ####        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0xC0, 0x00, //        ###       
+	0x00, 0xE0, 0x00, //         ###      
+	0x01, 0xC0, 0x00, //        ###       
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x01, 0x80, 0x00, //        ##        
+	0x07, 0x80, 0x00, //      ####        
+	0x07, 0x00, 0x00, //      ###         
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+
+	// @6768 '~' (17 pixels wide)
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x0E, 0x00, 0x00, //     ###          
+	0x1F, 0x18, 0x00, //    #####   ##    
+	0x3B, 0xB8, 0x00, //   ### ### ###    
+	0x31, 0xF0, 0x00, //   ##   #####     
+	0x00, 0xE0, 0x00, //         ###      
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+	0x00, 0x00, 0x00, //                  
+};
+
+sFONT Font24 = {
+  Font24_Table,
+  17, /* Width */
+  24, /* Height */
+};
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Function_Prototypes
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Functions
+  * @{
+  */
+    
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/Fonts/font8.c b/USB-PD_Provider_1port/Utilities/Fonts/font8.c
new file mode 100644
index 0000000..76db7b0
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/Fonts/font8.c
@@ -0,0 +1,1049 @@
+/**
+  ******************************************************************************
+  * @file    font8.c
+  * @author  MCD Application Team
+  * @brief   This file provides text Font8 for STM32 board's LCD driver.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2014 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+  * @{
+  */
+
+/** @addtogroup STM32_EVAL
+  * @{
+  */
+
+/** @addtogroup Common
+  * @{
+  */
+
+/** @addtogroup FONTS
+  * @brief      This file provides text Font8 for STM32xx-EVAL's LCD driver.
+  * @{
+  */
+
+/** @defgroup FONTS_Private_Types
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Defines
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup FONTS_Private_Macros
+  * @{
+  */
+/**
+  * @}
+  */ 
+  
+
+/** @defgroup FONTS_Private_Variables
+  * @{
+  */
+//
+//  Font data for Courier New 12pt
+//
+
+const uint8_t Font8_Table[] =
+{
+	// @0 ' ' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @8 '!' (5 pixels wide)
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x00, //
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @16 '"' (5 pixels wide)
+	0x50, //  # #
+	0x50, //  # #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @24 '#' (5 pixels wide)
+	0x28, //   # #
+	0x50, //  # #
+	0xF8, // #####
+	0x50, //  # #
+	0xF8, // #####
+	0x50, //  # #
+	0xA0, // # #
+	0x00, //
+
+	// @32 '$' (5 pixels wide)
+	0x20, //   #
+	0x30, //   ##
+	0x60, //  ##
+	0x30, //   ##
+	0x10, //    #
+	0x60, //  ##
+	0x20, //   #
+	0x00, //
+
+	// @40 '%' (5 pixels wide)
+	0x20, //   #
+	0x20, //   #
+	0x18, //    ##
+	0x60, //  ##
+	0x10, //    #
+	0x10, //    #
+	0x00, //
+	0x00, //
+
+	// @48 '&' (5 pixels wide)
+	0x00, //
+	0x38, //   ###
+	0x20, //   #
+	0x60, //  ##
+	0x50, //  # #
+	0x78, //  ####
+	0x00, //
+	0x00, //
+
+	// @56 ''' (5 pixels wide)
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @64 '(' (5 pixels wide)
+	0x10, //    #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x10, //    #
+	0x00, //
+
+	// @72 ')' (5 pixels wide)
+	0x40, //  #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x40, //  #
+	0x00, //
+
+	// @80 '*' (5 pixels wide)
+	0x20, //   #
+	0x70, //  ###
+	0x20, //   #
+	0x50, //  # #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @88 '+' (5 pixels wide)
+	0x00, //
+	0x20, //   #
+	0x20, //   #
+	0xF8, // #####
+	0x20, //   #
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @96 ',' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x10, //    #
+	0x20, //   #
+	0x20, //   #
+	0x00, //
+
+	// @104 '-' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x70, //  ###
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @112 '.' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @120 '/' (5 pixels wide)
+	0x10, //    #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x40, //  #
+	0x40, //  #
+	0x80, // #
+	0x00, //
+
+	// @128 '0' (5 pixels wide)
+	0x20, //   #
+	0x50, //  # #
+	0x50, //  # #
+	0x50, //  # #
+	0x50, //  # #
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @136 '1' (5 pixels wide)
+	0x60, //  ##
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0xF8, // #####
+	0x00, //
+	0x00, //
+
+	// @144 '2' (5 pixels wide)
+	0x20, //   #
+	0x50, //  # #
+	0x20, //   #
+	0x20, //   #
+	0x40, //  #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @152 '3' (5 pixels wide)
+	0x20, //   #
+	0x50, //  # #
+	0x10, //    #
+	0x20, //   #
+	0x10, //    #
+	0x60, //  ##
+	0x00, //
+	0x00, //
+
+	// @160 '4' (5 pixels wide)
+	0x10, //    #
+	0x30, //   ##
+	0x50, //  # #
+	0x78, //  ####
+	0x10, //    #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+
+	// @168 '5' (5 pixels wide)
+	0x70, //  ###
+	0x40, //  #
+	0x60, //  ##
+	0x10, //    #
+	0x50, //  # #
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @176 '6' (5 pixels wide)
+	0x30, //   ##
+	0x40, //  #
+	0x60, //  ##
+	0x50, //  # #
+	0x50, //  # #
+	0x60, //  ##
+	0x00, //
+	0x00, //
+
+	// @184 '7' (5 pixels wide)
+	0x70, //  ###
+	0x50, //  # #
+	0x10, //    #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @192 '8' (5 pixels wide)
+	0x20, //   #
+	0x50, //  # #
+	0x20, //   #
+	0x50, //  # #
+	0x50, //  # #
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @200 '9' (5 pixels wide)
+	0x30, //   ##
+	0x50, //  # #
+	0x50, //  # #
+	0x30, //   ##
+	0x10, //    #
+	0x60, //  ##
+	0x00, //
+	0x00, //
+
+	// @208 ':' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x20, //   #
+	0x00, //
+	0x00, //
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @216 ';' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x10, //    #
+	0x00, //
+	0x10, //    #
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @224 '<' (5 pixels wide)
+	0x00, //
+	0x10, //    #
+	0x20, //   #
+	0xC0, // ##
+	0x20, //   #
+	0x10, //    #
+	0x00, //
+	0x00, //
+
+	// @232 '=' (5 pixels wide)
+	0x00, //
+	0x70, //  ###
+	0x00, //
+	0x70, //  ###
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @240 '>' (5 pixels wide)
+	0x00, //
+	0x40, //  #
+	0x20, //   #
+	0x18, //    ##
+	0x20, //   #
+	0x40, //  #
+	0x00, //
+	0x00, //
+
+	// @248 '?' (5 pixels wide)
+	0x20, //   #
+	0x50, //  # #
+	0x10, //    #
+	0x20, //   #
+	0x00, //
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @256 '@' (5 pixels wide)
+	0x30, //   ##
+	0x48, //  #  #
+	0x48, //  #  #
+	0x58, //  # ##
+	0x48, //  #  #
+	0x40, //  #
+	0x38, //   ###
+	0x00, //
+
+	// @264 'A' (5 pixels wide)
+	0x60, //  ##
+	0x20, //   #
+	0x50, //  # #
+	0x70, //  ###
+	0x88, // #   #
+	0xD8, // ## ##
+	0x00, //
+	0x00, //
+
+	// @272 'B' (5 pixels wide)
+	0xF0, // ####
+	0x48, //  #  #
+	0x70, //  ###
+	0x48, //  #  #
+	0x48, //  #  #
+	0xF0, // ####
+	0x00, //
+	0x00, //
+
+	// @280 'C' (5 pixels wide)
+	0x70, //  ###
+	0x50, //  # #
+	0x40, //  #
+	0x40, //  #
+	0x40, //  #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @288 'D' (5 pixels wide)
+	0xF0, // ####
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0xF0, // ####
+	0x00, //
+	0x00, //
+
+	// @296 'E' (5 pixels wide)
+	0xF8, // #####
+	0x48, //  #  #
+	0x60, //  ##
+	0x40, //  #
+	0x48, //  #  #
+	0xF8, // #####
+	0x00, //
+	0x00, //
+
+	// @304 'F' (5 pixels wide)
+	0xF8, // #####
+	0x48, //  #  #
+	0x60, //  ##
+	0x40, //  #
+	0x40, //  #
+	0xE0, // ###
+	0x00, //
+	0x00, //
+
+	// @312 'G' (5 pixels wide)
+	0x70, //  ###
+	0x40, //  #
+	0x40, //  #
+	0x58, //  # ##
+	0x50, //  # #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @320 'H' (5 pixels wide)
+	0xE8, // ### #
+	0x48, //  #  #
+	0x78, //  ####
+	0x48, //  #  #
+	0x48, //  #  #
+	0xE8, // ### #
+	0x00, //
+	0x00, //
+
+	// @328 'I' (5 pixels wide)
+	0x70, //  ###
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @336 'J' (5 pixels wide)
+	0x38, //   ###
+	0x10, //    #
+	0x10, //    #
+	0x50, //  # #
+	0x50, //  # #
+	0x20, //   #
+	0x00, //
+	0x00, //
+
+	// @344 'K' (5 pixels wide)
+	0xD8, // ## ##
+	0x50, //  # #
+	0x60, //  ##
+	0x70, //  ###
+	0x50, //  # #
+	0xD8, // ## ##
+	0x00, //
+	0x00, //
+
+	// @352 'L' (5 pixels wide)
+	0xE0, // ###
+	0x40, //  #
+	0x40, //  #
+	0x40, //  #
+	0x48, //  #  #
+	0xF8, // #####
+	0x00, //
+	0x00, //
+
+	// @360 'M' (5 pixels wide)
+	0xD8, // ## ##
+	0xD8, // ## ##
+	0xD8, // ## ##
+	0xA8, // # # #
+	0x88, // #   #
+	0xD8, // ## ##
+	0x00, //
+	0x00, //
+
+	// @368 'N' (5 pixels wide)
+	0xD8, // ## ##
+	0x68, //  ## #
+	0x68, //  ## #
+	0x58, //  # ##
+	0x58, //  # ##
+	0xE8, // ### #
+	0x00, //
+	0x00, //
+
+	// @376 'O' (5 pixels wide)
+	0x30, //   ##
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @384 'P' (5 pixels wide)
+	0xF0, // ####
+	0x48, //  #  #
+	0x48, //  #  #
+	0x70, //  ###
+	0x40, //  #
+	0xE0, // ###
+	0x00, //
+	0x00, //
+
+	// @392 'Q' (5 pixels wide)
+	0x30, //   ##
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x30, //   ##
+	0x18, //    ##
+	0x00, //
+
+	// @400 'R' (5 pixels wide)
+	0xF0, // ####
+	0x48, //  #  #
+	0x48, //  #  #
+	0x70, //  ###
+	0x48, //  #  #
+	0xE8, // ### #
+	0x00, //
+	0x00, //
+
+	// @408 'S' (5 pixels wide)
+	0x70, //  ###
+	0x50, //  # #
+	0x20, //   #
+	0x10, //    #
+	0x50, //  # #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @416 'T' (5 pixels wide)
+	0xF8, // #####
+	0xA8, // # # #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @424 'U' (5 pixels wide)
+	0xD8, // ## ##
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x48, //  #  #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @432 'V' (5 pixels wide)
+	0xD8, // ## ##
+	0x88, // #   #
+	0x48, //  #  #
+	0x50, //  # #
+	0x50, //  # #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @440 'W' (5 pixels wide)
+	0xD8, // ## ##
+	0x88, // #   #
+	0xA8, // # # #
+	0xA8, // # # #
+	0xA8, // # # #
+	0x50, //  # #
+	0x00, //
+	0x00, //
+
+	// @448 'X' (5 pixels wide)
+	0xD8, // ## ##
+	0x50, //  # #
+	0x20, //   #
+	0x20, //   #
+	0x50, //  # #
+	0xD8, // ## ##
+	0x00, //
+	0x00, //
+
+	// @456 'Y' (5 pixels wide)
+	0xD8, // ## ##
+	0x88, // #   #
+	0x50, //  # #
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @464 'Z' (5 pixels wide)
+	0x78, //  ####
+	0x48, //  #  #
+	0x10, //    #
+	0x20, //   #
+	0x48, //  #  #
+	0x78, //  ####
+	0x00, //
+	0x00, //
+
+	// @472 '[' (5 pixels wide)
+	0x30, //   ##
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x30, //   ##
+	0x00, //
+
+	// @480 '\' (5 pixels wide)
+	0x80, // #
+	0x40, //  #
+	0x40, //  #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x10, //    #
+	0x00, //
+
+	// @488 ']' (5 pixels wide)
+	0x60, //  ##
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x60, //  ##
+	0x00, //
+
+	// @496 '^' (5 pixels wide)
+	0x20, //   #
+	0x20, //   #
+	0x50, //  # #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @504 '_' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0xF8, // #####
+
+	// @512 '`' (5 pixels wide)
+	0x20, //   #
+	0x10, //    #
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+	0x00, //
+
+	// @520 'a' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x30, //   ##
+	0x10, //    #
+	0x70, //  ###
+	0x78, //  ####
+	0x00, //
+	0x00, //
+
+	// @528 'b' (5 pixels wide)
+	0xC0, // ##
+	0x40, //  #
+	0x70, //  ###
+	0x48, //  #  #
+	0x48, //  #  #
+	0xF0, // ####
+	0x00, //
+	0x00, //
+
+	// @536 'c' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x70, //  ###
+	0x40, //  #
+	0x40, //  #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @544 'd' (5 pixels wide)
+	0x18, //    ##
+	0x08, //     #
+	0x38, //   ###
+	0x48, //  #  #
+	0x48, //  #  #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+
+	// @552 'e' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x70, //  ###
+	0x70, //  ###
+	0x40, //  #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @560 'f' (5 pixels wide)
+	0x10, //    #
+	0x20, //   #
+	0x70, //  ###
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @568 'g' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x38, //   ###
+	0x48, //  #  #
+	0x48, //  #  #
+	0x38, //   ###
+	0x08, //     #
+	0x30, //   ##
+
+	// @576 'h' (5 pixels wide)
+	0xC0, // ##
+	0x40, //  #
+	0x70, //  ###
+	0x48, //  #  #
+	0x48, //  #  #
+	0xE8, // ### #
+	0x00, //
+	0x00, //
+
+	// @584 'i' (5 pixels wide)
+	0x20, //   #
+	0x00, //
+	0x60, //  ##
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @592 'j' (5 pixels wide)
+	0x20, //   #
+	0x00, //
+	0x70, //  ###
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x10, //    #
+	0x70, //  ###
+
+	// @600 'k' (5 pixels wide)
+	0xC0, // ##
+	0x40, //  #
+	0x58, //  # ##
+	0x70, //  ###
+	0x50, //  # #
+	0xD8, // ## ##
+	0x00, //
+	0x00, //
+
+	// @608 'l' (5 pixels wide)
+	0x60, //  ##
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @616 'm' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0xD0, // ## #
+	0xA8, // # # #
+	0xA8, // # # #
+	0xA8, // # # #
+	0x00, //
+	0x00, //
+
+	// @624 'n' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0xF0, // ####
+	0x48, //  #  #
+	0x48, //  #  #
+	0xC8, // ##  #
+	0x00, //
+	0x00, //
+
+	// @632 'o' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x30, //   ##
+	0x48, //  #  #
+	0x48, //  #  #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @640 'p' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0xF0, // ####
+	0x48, //  #  #
+	0x48, //  #  #
+	0x70, //  ###
+	0x40, //  #
+	0xE0, // ###
+
+	// @648 'q' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x38, //   ###
+	0x48, //  #  #
+	0x48, //  #  #
+	0x38, //   ###
+	0x08, //     #
+	0x18, //    ##
+
+	// @656 'r' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x78, //  ####
+	0x20, //   #
+	0x20, //   #
+	0x70, //  ###
+	0x00, //
+	0x00, //
+
+	// @664 's' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x30, //   ##
+	0x20, //   #
+	0x10, //    #
+	0x60, //  ##
+	0x00, //
+	0x00, //
+
+	// @672 't' (5 pixels wide)
+	0x00, //
+	0x40, //  #
+	0xF0, // ####
+	0x40, //  #
+	0x48, //  #  #
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @680 'u' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0xD8, // ## ##
+	0x48, //  #  #
+	0x48, //  #  #
+	0x38, //   ###
+	0x00, //
+	0x00, //
+
+	// @688 'v' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0xC8, // ##  #
+	0x48, //  #  #
+	0x30, //   ##
+	0x30, //   ##
+	0x00, //
+	0x00, //
+
+	// @696 'w' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0xD8, // ## ##
+	0xA8, // # # #
+	0xA8, // # # #
+	0x50, //  # #
+	0x00, //
+	0x00, //
+
+	// @704 'x' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x48, //  #  #
+	0x30, //   ##
+	0x30, //   ##
+	0x48, //  #  #
+	0x00, //
+	0x00, //
+
+	// @712 'y' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0xD8, // ## ##
+	0x50, //  # #
+	0x50, //  # #
+	0x20, //   #
+	0x20, //   #
+	0x60, //  ##
+
+	// @720 'z' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x78, //  ####
+	0x50, //  # #
+	0x28, //   # #
+	0x78, //  ####
+	0x00, //
+	0x00, //
+
+	// @728 '{' (5 pixels wide)
+	0x10, //    #
+	0x20, //   #
+	0x20, //   #
+	0x60, //  ##
+	0x20, //   #
+	0x20, //   #
+	0x10, //    #
+	0x00, //
+
+	// @736 '|' (5 pixels wide)
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x20, //   #
+	0x00, //
+
+	// @744 '}' (5 pixels wide)
+	0x40, //  #
+	0x20, //   #
+	0x20, //   #
+	0x30, //   ##
+	0x20, //   #
+	0x20, //   #
+	0x40, //  #
+	0x00, //
+
+	// @752 '~' (5 pixels wide)
+	0x00, //
+	0x00, //
+	0x00, //
+	0x28, //   # #
+	0x50, //  # #
+	0x00, //
+	0x00, //
+	0x00, //
+};
+
+sFONT Font8 = {
+  Font8_Table,
+  5, /* Width */
+  8, /* Height */
+};
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/Fonts/fonts.h b/USB-PD_Provider_1port/Utilities/Fonts/fonts.h
new file mode 100644
index 0000000..7194a83
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/Fonts/fonts.h
@@ -0,0 +1,116 @@
+/**
+  ******************************************************************************
+  * @file    fonts.h
+  * @author  MCD Application Team
+  * @brief   This file provides definition for fonts to be used for STM32
+  *          board's LCD driver
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2014 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __FONTS_H
+#define __FONTS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include 
+
+/** @addtogroup Utilities
+  * @{
+  */
+
+/** @addtogroup STM32_EVAL
+  * @{
+  */
+
+/** @addtogroup Common
+  * @{
+  */
+
+/** @addtogroup FONTS
+  * @{
+  */
+
+/** @defgroup FONTS_Exported_Types
+  * @{
+  */
+typedef struct _tFont
+{
+  const uint8_t *table;
+  uint16_t Width;
+  uint16_t Height;
+} sFONT;
+
+extern sFONT Font24;
+extern sFONT Font20;
+extern sFONT Font16;
+extern sFONT Font12;
+extern sFONT Font8;
+/**
+  * @}
+  */
+
+/** @defgroup FONTS_Exported_Constants
+  * @{
+  */
+#define LINE(x) ((x) * (((sFONT *)BSP_LCD_GetFont())->Height))
+
+/**
+  * @}
+  */
+
+/** @defgroup FONTS_Exported_Macros
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+/** @defgroup FONTS_Exported_Functions
+  * @{
+  */ 
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __FONTS_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */      
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/Release_Notes.html b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/Release_Notes.html
new file mode 100644
index 0000000..4a23f0c
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/Release_Notes.html
@@ -0,0 +1,462 @@
+
+
+
+  
+  
+  
+  STM32 USB-C Power Delivery Graphical User Interface (GUI_INTERFACE)
+  
+  
+  
+  
+
+
+

+

+

+
Release Notes for STM32 USB-C Power Delivery Graphical User Interface (GUI_INTERFACE)

+
Copyright © 2018 STMicroelectronics

+

+
+

+
License

+
This software component is licensed by ST under BSD 3-Clause license, the “Licenseâ€; You may not use this component except in compliance with the License. You may obtain a copy of the License at:

+
http://www.opensource.org/licenses/BSD-3-Clause

+
Purpose

+
This driver is used in a STM32 application (embedded side) communicating with STM32CubeMonitor-UCPD.

+
The application can be found in ST website:

+
https://www.st.com/en/development-tools/stm32cubemonucpd.html

+

+

+
Update History

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list

+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Headline
[Codespell] minor typo corrections
Ticket 93706 - Errors occurred with GUI_API
Ticket 93830 - Not possible to modify parameters Responds_to_discov and Attempts_disco
Ticket 92751 - Add applications for STM32G0C1E-EV board

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.26
    • 
+
  • STM32CubeIDE v1.2.0
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
This version should be used after TRACER_EMB version V1.4.0 due to a remove of the prototype TRACER_EMB_WakeUpProcess

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list

+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Headline
Increase stack size linked to issue during tests
Ticket 86356 - Correct misspelled words
Ticket 87173 - Add a mechanism to check that GUI FLASH area is not corrupted
Remove few parameters not used in NO_PD config
Add “usbpd_def.h†include in gui_api.h (usbpd_def.h types used in gui_api.h)
GUI_PARAM_NB_TAG value not correct
Remove wakeup trace (TRACER_EMB_WakeUpProcess prototype has been removed from TRACER_EMB)

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.26
    • 
+
  • STM32CubeIDE v1.2.0
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
This version should be used after TRACER_EMB version V1.4.0 due to a remove of the prototype TRACER_EMB_WakeUpProcess

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Add “usbpd_def.h†include in gui_api.h (usbpd_def.h types used in gui_api.h)

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.26
    • 
+
  • STM32CubeIDE v1.2.0
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
No compatibility break with previous version

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– User functions for VDM display port should be under switch VDM only

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.26
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
No compatibility break with previous version

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Move TASK ID from Core/inc/usbpd_task.h yo applications/inc/utilities_conf.h Add switch USE_STM32_UTILITY_OS to integrate SEQUENCER utility - bis Add switch USE_STM32_UTILITY_OS to integrate SEQUENCER utility Ticket 81002 - unwanted include file in gui_api.h integration of the new utilities SEQ to handle GUI task in non RTOS mode

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.26
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
No compatibility break with previous version

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Ticket 74534 - clean code linked to USBPD_CORE_DATATYPE_REQUEST_DO Ticket 71492 - PE_Dataswap parameter needs to be duplicated in gui_api Ticket 74120 - Compilation issue in case of GUI_INTERFACE use without FreeRTOS Ticket 73678 - Initialize CAD_tDRP & CAD_dcSRC_DRP at GUI initialization Ticket 73064 - SNK_extended_cap must be answered while SNK or DRP Remove warning in NRTOS mode Remove dependence with USBPD internal variable

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.26
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
No compatibility break with previous version

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– [USBPD][GUI] Increase GUI_STACK_SIZE_ADDON_FOR_CMSIS in case of CMSIS OS V2. [USBPD][GUI] Ticket 66690 - [FOSS-Audit] SLA0044 headers in Utilities files [USBPD][GUI] Ticket 71488 - project settings (and also behavior) differs vs _Gui_Interface switch activation [USBPD][GUI] Remove useless include file + use of Nb ports define for USBPD_NbPDO initialisation [USBPD][GUI] Update in template of usbpd_gui_memmap_template.h [USBPD][GUI] Ticket 70835 - PE_Dataswap parameter needs to be duplicated in gui_api [USBPD][GUI] Update in Flash erase function to be able to address F0/G0/G4 and L5 Dual bank flashes [USBPD][GUI]rename GUI_NbPDO to USBPD_NbPDO [USBPD][GUI] All the DPM_User_Settings should be initialized to be able to pass MQP tests [USBPD][GUI] Set DataRoleSwap as TRUE when GUI is enabled [USBPD][GUI] Move PE_DataSwap & PE_VconnSwap in the USBPD_USER_SettingsTypeDef for integration in cubeMX [USBPD][GUI] Ticket 67078 - Use common defines for XID, VID & PID [USBPD][GUI] Ticket 66284 - [CubeMx-UBSPD] Update generated code to make it compatible with CMSIS-RTOS v2

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.26
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
No compatibility break with previous version

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Ticket 62471 - Solve Hard Fault called from usage of UCPD voltage calculation using FPU for UCPD Ticket 66412 - Allow communication with CubeMonitor-UCPD from CubeMx generated examples (from CubeMx 5.2.1) Ticket 66638 - SLA0044 headers in files updated to BSD-3-Clause Ticket 67146 - Add memory mapping template in GUI utility (template to be used in user code)

+
Known Limitations

+
Outstanding bugs list : None

+
Requirements not met or planned in a forthcoming release : None

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
All STM32xx devices implementing a USBPD application able to communicate with CubeMonitor_UCPD

+
Backward compatibility

+
No compatibility break with previous version

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Update to wakeup the TX send Ticket 62412 - Sink request using GUI seems not coherent with registered SNKPDOs (GUI impact) Ticket 62344 - [GUI] Display a warning message in GUI in case of information comes from previous saving done by user Remove sModesInfo as no more used Re-enable IT when FreeRTOS is used Renable SYSTICK after calling FreeRTOS function Ticket 61311 - [MB1303] integration of GUI interface Add Free text outside _VDM switch GUI regression after moving GUI from DPM - use GUIMsgBox instead of DPMMsgBox GUIMsgBox used only in case of _RTOS Remove dependencies with GUI in DPM USER code Manage Free Text Ticket 60213 - STM32G071B-DISCO_Demonstrations_USBPD_Analyzer_SW4STM32_Compilation Warnings Add include for G4

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Ticket 60213 - STM32G071B-DISCO_Demonstrations_USBPD_Analyzer_SW4STM32_Compilation Warnings. Modifications in GUI_INTERFACE module for solving compilation warnings under SW4STM32 (Gcc)

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– correction link with renaming toogle toggle Ticket 57478 - SKEDB not implemented Remove extern GUI_Flag variable from application

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Ticket 57478 - SKEDB not implemented Remove extern GUI_Flag variable from application

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– rename DPM_User_Params to GUI_User_Params add a link with TRACER_EMB solve compilation issue

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Update License information Solve compilation issue when using IAR V8.30.1 Add ping feature

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Remove compilation warning

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– Add cable information management Update around the VDM data (SVID, SVDM modes, … )

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
Fixed bugs list Headline ——– First official version for STM32 USB-PD GUI Interface utility. This utility enables communication between USB-PD device (controlled on STM32 side) and USB-PD PC tool

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+

+

+
For complete documentation on STM32,visit: [www.st.com/stm32]

+This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge.
+

+
+
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/favicon.png b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/favicon.png
new file mode 100644
index 0000000..06713ee
Binary files /dev/null and b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/favicon.png differ
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/mini-st.css b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/mini-st.css
new file mode 100644
index 0000000..2d4af86
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/mini-st.css
@@ -0,0 +1,1700 @@
+@charset "UTF-8";
+/*
+  Flavor name: Default (mini-default)
+  Author: Angelos Chalaris (chalarangelo@gmail.com)
+  Maintainers: Angelos Chalaris
+  mini.css version: v3.0.0-alpha.3
+*/
+/*
+  Browsers resets and base typography.
+*/
+/* Core module CSS variable definitions */
+:root {
+  --fore-color: #111;
+  --secondary-fore-color: #444;
+  --back-color: #f8f8f8;
+  --secondary-back-color: #f0f0f0;
+  --blockquote-color: #f57c00;
+  --pre-color: #1565c0;
+  --border-color: #aaa;
+  --secondary-border-color: #ddd;
+  --heading-ratio: 1.19;
+  --universal-margin: 0.5rem;
+  --universal-padding: 0.125rem;
+  --universal-border-radius: 0.125rem;
+  --a-link-color: #0277bd;
+  --a-visited-color: #01579b; }
+
+html {
+  font-size: 14px; }
+
+a, b, del, em, i, ins, q, span, strong, u {
+  font-size: 1em; }
+
+html, * {
+  font-family: -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, Ubuntu, "Helvetica Neue", Helvetica, sans-serif;
+  line-height: 1.4;
+  -webkit-text-size-adjust: 100%; }
+
+* {
+  font-size: 1rem; }
+
+body {
+  margin: 0;
+  color: var(--fore-color);
+  background: var(--back-color); }
+
+details {
+  display: block; }
+
+summary {
+  display: list-item; }
+
+abbr[title] {
+  border-bottom: none;
+  text-decoration: underline dotted; }
+
+input {
+  overflow: visible; }
+
+img {
+  max-width: 100%;
+  height: auto; }
+
+h1, h2, h3, h4, h5, h6 {
+  line-height: 1.2;
+  margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);
+  font-weight: 500; }
+  h1 small, h2 small, h3 small, h4 small, h5 small, h6 small {
+    color: var(--secondary-fore-color);
+    display: block;
+    margin-top: -0.25rem; }
+
+h1 {
+  font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); }
+
+h2 {
+  font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio); );
+  background: var(--mark-back-color);
+  font-weight: 600;
+  padding: 0.1em 0.5em 0.2em 0.5em;
+  color: var(--mark-fore-color); }
+
+h3 {
+  font-size: calc(1rem * var(--heading-ratio));
+  padding-left: calc(2 * var(--universal-margin)); 
+  /* background: var(--border-color); */
+    }
+
+h4 {
+  font-size: 1rem;);
+  padding-left: calc(4 * var(--universal-margin));  }
+
+h5 {
+  font-size: 1rem; }
+
+h6 {
+  font-size: calc(1rem / var(--heading-ratio)); }
+
+p {
+  margin: var(--universal-margin); }
+
+ol, ul {
+  margin: var(--universal-margin);
+  padding-left: calc(6 * var(--universal-margin)); }
+
+b, strong {
+  font-weight: 700; }
+
+hr {
+  box-sizing: content-box;
+  border: 0;
+  line-height: 1.25em;
+  margin: var(--universal-margin);
+  height: 0.0625rem;
+  background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); }
+
+blockquote {
+  display: block;
+  position: relative;
+  font-style: italic;
+  color: var(--secondary-fore-color);
+  margin: var(--universal-margin);
+  padding: calc(3 * var(--universal-padding));
+  border: 0.0625rem solid var(--secondary-border-color);
+  border-left: 0.375rem solid var(--blockquote-color);
+  border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+  blockquote:before {
+    position: absolute;
+    top: calc(0rem - var(--universal-padding));
+    left: 0;
+    font-family: sans-serif;
+    font-size: 3rem;
+    font-weight: 700;
+    content: "\201c";
+    color: var(--blockquote-color); }
+  blockquote[cite]:after {
+    font-style: normal;
+    font-size: 0.75em;
+    font-weight: 700;
+    content: "\a—  " attr(cite);
+    white-space: pre; }
+
+code, kbd, pre, samp {
+  font-family: Menlo, Consolas, monospace;
+  font-size: 0.85em; }
+
+code {
+  background: var(--secondary-back-color);
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+kbd {
+  background: var(--fore-color);
+  color: var(--back-color);
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+pre {
+  overflow: auto;
+  background: var(--secondary-back-color);
+  padding: calc(1.5 * var(--universal-padding));
+  margin: var(--universal-margin);
+  border: 0.0625rem solid var(--secondary-border-color);
+  border-left: 0.25rem solid var(--pre-color);
+  border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+
+sup, sub, code, kbd {
+  line-height: 0;
+  position: relative;
+  vertical-align: baseline; }
+
+small, sup, sub, figcaption {
+  font-size: 0.75em; }
+
+sup {
+  top: -0.5em; }
+
+sub {
+  bottom: -0.25em; }
+
+figure {
+  margin: var(--universal-margin); }
+
+figcaption {
+  color: var(--secondary-fore-color); }
+
+a {
+  text-decoration: none; }
+  a:link {
+    color: var(--a-link-color); }
+  a:visited {
+    color: var(--a-visited-color); }
+  a:hover, a:focus {
+    text-decoration: underline; }
+
+/*
+  Definitions for the grid system, cards and containers.
+*/
+.container {
+  margin: 0 auto;
+  padding: 0 calc(1.5 * var(--universal-padding)); }
+
+.row {
+  box-sizing: border-box;
+  display: flex;
+  flex: 0 1 auto;
+  flex-flow: row wrap; }
+
+.col-sm,
+[class^='col-sm-'],
+[class^='col-sm-offset-'],
+.row[class*='cols-sm-'] > * {
+  box-sizing: border-box;
+  flex: 0 0 auto;
+  padding: 0 calc(var(--universal-padding) / 2); }
+
+.col-sm,
+.row.cols-sm > * {
+  max-width: 100%;
+  flex-grow: 1;
+  flex-basis: 0; }
+
+.col-sm-1,
+.row.cols-sm-1 > * {
+  max-width: 8.3333333333%;
+  flex-basis: 8.3333333333%; }
+
+.col-sm-offset-0 {
+  margin-left: 0; }
+
+.col-sm-2,
+.row.cols-sm-2 > * {
+  max-width: 16.6666666667%;
+  flex-basis: 16.6666666667%; }
+
+.col-sm-offset-1 {
+  margin-left: 8.3333333333%; }
+
+.col-sm-3,
+.row.cols-sm-3 > * {
+  max-width: 25%;
+  flex-basis: 25%; }
+
+.col-sm-offset-2 {
+  margin-left: 16.6666666667%; }
+
+.col-sm-4,
+.row.cols-sm-4 > * {
+  max-width: 33.3333333333%;
+  flex-basis: 33.3333333333%; }
+
+.col-sm-offset-3 {
+  margin-left: 25%; }
+
+.col-sm-5,
+.row.cols-sm-5 > * {
+  max-width: 41.6666666667%;
+  flex-basis: 41.6666666667%; }
+
+.col-sm-offset-4 {
+  margin-left: 33.3333333333%; }
+
+.col-sm-6,
+.row.cols-sm-6 > * {
+  max-width: 50%;
+  flex-basis: 50%; }
+
+.col-sm-offset-5 {
+  margin-left: 41.6666666667%; }
+
+.col-sm-7,
+.row.cols-sm-7 > * {
+  max-width: 58.3333333333%;
+  flex-basis: 58.3333333333%; }
+
+.col-sm-offset-6 {
+  margin-left: 50%; }
+
+.col-sm-8,
+.row.cols-sm-8 > * {
+  max-width: 66.6666666667%;
+  flex-basis: 66.6666666667%; }
+
+.col-sm-offset-7 {
+  margin-left: 58.3333333333%; }
+
+.col-sm-9,
+.row.cols-sm-9 > * {
+  max-width: 75%;
+  flex-basis: 75%; }
+
+.col-sm-offset-8 {
+  margin-left: 66.6666666667%; }
+
+.col-sm-10,
+.row.cols-sm-10 > * {
+  max-width: 83.3333333333%;
+  flex-basis: 83.3333333333%; }
+
+.col-sm-offset-9 {
+  margin-left: 75%; }
+
+.col-sm-11,
+.row.cols-sm-11 > * {
+  max-width: 91.6666666667%;
+  flex-basis: 91.6666666667%; }
+
+.col-sm-offset-10 {
+  margin-left: 83.3333333333%; }
+
+.col-sm-12,
+.row.cols-sm-12 > * {
+  max-width: 100%;
+  flex-basis: 100%; }
+
+.col-sm-offset-11 {
+  margin-left: 91.6666666667%; }
+
+.col-sm-normal {
+  order: initial; }
+
+.col-sm-first {
+  order: -999; }
+
+.col-sm-last {
+  order: 999; }
+
+@media screen and (min-width: 500px) {
+  .col-md,
+  [class^='col-md-'],
+  [class^='col-md-offset-'],
+  .row[class*='cols-md-'] > * {
+    box-sizing: border-box;
+    flex: 0 0 auto;
+    padding: 0 calc(var(--universal-padding) / 2); }
+
+  .col-md,
+  .row.cols-md > * {
+    max-width: 100%;
+    flex-grow: 1;
+    flex-basis: 0; }
+
+  .col-md-1,
+  .row.cols-md-1 > * {
+    max-width: 8.3333333333%;
+    flex-basis: 8.3333333333%; }
+
+  .col-md-offset-0 {
+    margin-left: 0; }
+
+  .col-md-2,
+  .row.cols-md-2 > * {
+    max-width: 16.6666666667%;
+    flex-basis: 16.6666666667%; }
+
+  .col-md-offset-1 {
+    margin-left: 8.3333333333%; }
+
+  .col-md-3,
+  .row.cols-md-3 > * {
+    max-width: 25%;
+    flex-basis: 25%; }
+
+  .col-md-offset-2 {
+    margin-left: 16.6666666667%; }
+
+  .col-md-4,
+  .row.cols-md-4 > * {
+    max-width: 33.3333333333%;
+    flex-basis: 33.3333333333%; }
+
+  .col-md-offset-3 {
+    margin-left: 25%; }
+
+  .col-md-5,
+  .row.cols-md-5 > * {
+    max-width: 41.6666666667%;
+    flex-basis: 41.6666666667%; }
+
+  .col-md-offset-4 {
+    margin-left: 33.3333333333%; }
+
+  .col-md-6,
+  .row.cols-md-6 > * {
+    max-width: 50%;
+    flex-basis: 50%; }
+
+  .col-md-offset-5 {
+    margin-left: 41.6666666667%; }
+
+  .col-md-7,
+  .row.cols-md-7 > * {
+    max-width: 58.3333333333%;
+    flex-basis: 58.3333333333%; }
+
+  .col-md-offset-6 {
+    margin-left: 50%; }
+
+  .col-md-8,
+  .row.cols-md-8 > * {
+    max-width: 66.6666666667%;
+    flex-basis: 66.6666666667%; }
+
+  .col-md-offset-7 {
+    margin-left: 58.3333333333%; }
+
+  .col-md-9,
+  .row.cols-md-9 > * {
+    max-width: 75%;
+    flex-basis: 75%; }
+
+  .col-md-offset-8 {
+    margin-left: 66.6666666667%; }
+
+  .col-md-10,
+  .row.cols-md-10 > * {
+    max-width: 83.3333333333%;
+    flex-basis: 83.3333333333%; }
+
+  .col-md-offset-9 {
+    margin-left: 75%; }
+
+  .col-md-11,
+  .row.cols-md-11 > * {
+    max-width: 91.6666666667%;
+    flex-basis: 91.6666666667%; }
+
+  .col-md-offset-10 {
+    margin-left: 83.3333333333%; }
+
+  .col-md-12,
+  .row.cols-md-12 > * {
+    max-width: 100%;
+    flex-basis: 100%; }
+
+  .col-md-offset-11 {
+    margin-left: 91.6666666667%; }
+
+  .col-md-normal {
+    order: initial; }
+
+  .col-md-first {
+    order: -999; }
+
+  .col-md-last {
+    order: 999; } }
+@media screen and (min-width: 1280px) {
+  .col-lg,
+  [class^='col-lg-'],
+  [class^='col-lg-offset-'],
+  .row[class*='cols-lg-'] > * {
+    box-sizing: border-box;
+    flex: 0 0 auto;
+    padding: 0 calc(var(--universal-padding) / 2); }
+
+  .col-lg,
+  .row.cols-lg > * {
+    max-width: 100%;
+    flex-grow: 1;
+    flex-basis: 0; }
+
+  .col-lg-1,
+  .row.cols-lg-1 > * {
+    max-width: 8.3333333333%;
+    flex-basis: 8.3333333333%; }
+
+  .col-lg-offset-0 {
+    margin-left: 0; }
+
+  .col-lg-2,
+  .row.cols-lg-2 > * {
+    max-width: 16.6666666667%;
+    flex-basis: 16.6666666667%; }
+
+  .col-lg-offset-1 {
+    margin-left: 8.3333333333%; }
+
+  .col-lg-3,
+  .row.cols-lg-3 > * {
+    max-width: 25%;
+    flex-basis: 25%; }
+
+  .col-lg-offset-2 {
+    margin-left: 16.6666666667%; }
+
+  .col-lg-4,
+  .row.cols-lg-4 > * {
+    max-width: 33.3333333333%;
+    flex-basis: 33.3333333333%; }
+
+  .col-lg-offset-3 {
+    margin-left: 25%; }
+
+  .col-lg-5,
+  .row.cols-lg-5 > * {
+    max-width: 41.6666666667%;
+    flex-basis: 41.6666666667%; }
+
+  .col-lg-offset-4 {
+    margin-left: 33.3333333333%; }
+
+  .col-lg-6,
+  .row.cols-lg-6 > * {
+    max-width: 50%;
+    flex-basis: 50%; }
+
+  .col-lg-offset-5 {
+    margin-left: 41.6666666667%; }
+
+  .col-lg-7,
+  .row.cols-lg-7 > * {
+    max-width: 58.3333333333%;
+    flex-basis: 58.3333333333%; }
+
+  .col-lg-offset-6 {
+    margin-left: 50%; }
+
+  .col-lg-8,
+  .row.cols-lg-8 > * {
+    max-width: 66.6666666667%;
+    flex-basis: 66.6666666667%; }
+
+  .col-lg-offset-7 {
+    margin-left: 58.3333333333%; }
+
+  .col-lg-9,
+  .row.cols-lg-9 > * {
+    max-width: 75%;
+    flex-basis: 75%; }
+
+  .col-lg-offset-8 {
+    margin-left: 66.6666666667%; }
+
+  .col-lg-10,
+  .row.cols-lg-10 > * {
+    max-width: 83.3333333333%;
+    flex-basis: 83.3333333333%; }
+
+  .col-lg-offset-9 {
+    margin-left: 75%; }
+
+  .col-lg-11,
+  .row.cols-lg-11 > * {
+    max-width: 91.6666666667%;
+    flex-basis: 91.6666666667%; }
+
+  .col-lg-offset-10 {
+    margin-left: 83.3333333333%; }
+
+  .col-lg-12,
+  .row.cols-lg-12 > * {
+    max-width: 100%;
+    flex-basis: 100%; }
+
+  .col-lg-offset-11 {
+    margin-left: 91.6666666667%; }
+
+  .col-lg-normal {
+    order: initial; }
+
+  .col-lg-first {
+    order: -999; }
+
+  .col-lg-last {
+    order: 999; } }
+/* Card component CSS variable definitions */
+:root {
+  --card-back-color: #f8f8f8;
+  --card-fore-color: #111;
+  --card-border-color: #ddd; }
+
+.card {
+  display: flex;
+  flex-direction: column;
+  justify-content: space-between;
+  align-self: center;
+  position: relative;
+  width: 100%;
+  background: var(--card-back-color);
+  color: var(--card-fore-color);
+  border: 0.0625rem solid var(--card-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin);
+  overflow: hidden; }
+  @media screen and (min-width: 320px) {
+    .card {
+      max-width: 320px; } }
+  .card > .sectione {
+    background: var(--card-back-color);
+    color: var(--card-fore-color);
+    box-sizing: border-box;
+    margin: 0;
+    border: 0;
+    border-radius: 0;
+    border-bottom: 0.0625rem solid var(--card-border-color);
+    padding: var(--universal-padding);
+    width: 100%; }
+    .card > .sectione.media {
+      height: 200px;
+      padding: 0;
+      -o-object-fit: cover;
+      object-fit: cover; }
+  .card > .sectione:last-child {
+    border-bottom: 0; }
+
+/*
+  Custom elements for card elements.
+*/
+@media screen and (min-width: 240px) {
+  .card.small {
+    max-width: 240px; } }
+@media screen and (min-width: 480px) {
+  .card.large {
+    max-width: 480px; } }
+.card.fluid {
+  max-width: 100%;
+  width: auto; }
+
+.card.warning {
+/*  --card-back-color: #ffca28; */
+  --card-back-color: #e5b8b7;
+  --card-border-color: #e8b825; }
+
+.card.error {
+  --card-back-color: #b71c1c;
+  --card-fore-color: #f8f8f8;
+  --card-border-color: #a71a1a; }
+
+.card > .sectione.dark {
+  --card-back-color: #e0e0e0; }
+
+.card > .sectione.double-padded {
+  padding: calc(1.5 * var(--universal-padding)); }
+
+/*
+  Definitions for forms and input elements.
+*/
+/* Input_control module CSS variable definitions */
+:root {
+  --form-back-color: #f0f0f0;
+  --form-fore-color: #111;
+  --form-border-color: #ddd;
+  --input-back-color: #f8f8f8;
+  --input-fore-color: #111;
+  --input-border-color: #ddd;
+  --input-focus-color: #0288d1;
+  --input-invalid-color: #d32f2f;
+  --button-back-color: #e2e2e2;
+  --button-hover-back-color: #dcdcdc;
+  --button-fore-color: #212121;
+  --button-border-color: transparent;
+  --button-hover-border-color: transparent;
+  --button-group-border-color: rgba(124, 124, 124, 0.54); }
+
+form {
+  background: var(--form-back-color);
+  color: var(--form-fore-color);
+  border: 0.0625rem solid var(--form-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin);
+  padding: calc(2 * var(--universal-padding)) var(--universal-padding); }
+
+fieldset {
+  border: 0.0625rem solid var(--form-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: calc(var(--universal-margin) / 4);
+  padding: var(--universal-padding); }
+
+legend {
+  box-sizing: border-box;
+  display: table;
+  max-width: 100%;
+  white-space: normal;
+  font-weight: 700;
+  padding: calc(var(--universal-padding) / 2); }
+
+label {
+  padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+.input-group {
+  display: inline-block; }
+  .input-group.fluid {
+    display: flex;
+    align-items: center;
+    justify-content: center; }
+    .input-group.fluid > input {
+      max-width: 100%;
+      flex-grow: 1;
+      flex-basis: 0px; }
+    @media screen and (max-width: 499px) {
+      .input-group.fluid {
+        align-items: stretch;
+        flex-direction: column; } }
+  .input-group.vertical {
+    display: flex;
+    align-items: stretch;
+    flex-direction: column; }
+    .input-group.vertical > input {
+      max-width: 100%;
+      flex-grow: 1;
+      flex-basis: 0px; }
+
+[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button {
+  height: auto; }
+
+[type="search"] {
+  -webkit-appearance: textfield;
+  outline-offset: -2px; }
+
+[type="search"]::-webkit-search-cancel-button,
+[type="search"]::-webkit-search-decoration {
+  -webkit-appearance: none; }
+
+input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"],
+[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select {
+  box-sizing: border-box;
+  background: var(--input-back-color);
+  color: var(--input-fore-color);
+  border: 0.0625rem solid var(--input-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: calc(var(--universal-margin) / 2);
+  padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus {
+  border-color: var(--input-focus-color);
+  box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid {
+  border-color: var(--input-invalid-color);
+  box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] {
+  background: var(--secondary-back-color); }
+
+select {
+  max-width: 100%; }
+
+option {
+  overflow: hidden;
+  text-overflow: ellipsis; }
+
+[type="checkbox"], [type="radio"] {
+  -webkit-appearance: none;
+  -moz-appearance: none;
+  appearance: none;
+  position: relative;
+  height: calc(1rem + var(--universal-padding) / 2);
+  width: calc(1rem + var(--universal-padding) / 2);
+  vertical-align: text-bottom;
+  padding: 0;
+  flex-basis: calc(1rem + var(--universal-padding) / 2) !important;
+  flex-grow: 0 !important; }
+  [type="checkbox"]:checked:before, [type="radio"]:checked:before {
+    position: absolute; }
+
+[type="checkbox"]:checked:before {
+  content: '\2713';
+  font-family: sans-serif;
+  font-size: calc(1rem + var(--universal-padding) / 2);
+  top: calc(0rem - var(--universal-padding));
+  left: calc(var(--universal-padding) / 4); }
+
+[type="radio"] {
+  border-radius: 100%; }
+  [type="radio"]:checked:before {
+    border-radius: 100%;
+    content: '';
+    top: calc(0.0625rem + var(--universal-padding) / 2);
+    left: calc(0.0625rem + var(--universal-padding) / 2);
+    background: var(--input-fore-color);
+    width: 0.5rem;
+    height: 0.5rem; }
+
+:placeholder-shown {
+  color: var(--input-fore-color); }
+
+::-ms-placeholder {
+  color: var(--input-fore-color);
+  opacity: 0.54; }
+
+button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner {
+  border-style: none;
+  padding: 0; }
+
+button, html [type="button"], [type="reset"], [type="submit"] {
+  -webkit-appearance: button; }
+
+button {
+  overflow: visible;
+  text-transform: none; }
+
+button, [type="button"], [type="submit"], [type="reset"],
+a.button, label.button, .button,
+a[role="button"], label[role="button"], [role="button"] {
+  display: inline-block;
+  background: var(--button-back-color);
+  color: var(--button-fore-color);
+  border: 0.0625rem solid var(--button-border-color);
+  border-radius: var(--universal-border-radius);
+  padding: var(--universal-padding) calc(1.5 * var(--universal-padding));
+  margin: var(--universal-margin);
+  text-decoration: none;
+  cursor: pointer;
+  transition: background 0.3s; }
+  button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus,
+  a.button:hover,
+  a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus,
+  a[role="button"]:hover,
+  a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus {
+    background: var(--button-hover-back-color);
+    border-color: var(--button-hover-border-color); }
+
+input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] {
+  cursor: not-allowed;
+  opacity: 0.75; }
+
+.button-group {
+  display: flex;
+  border: 0.0625rem solid var(--button-group-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin); }
+  .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] {
+    margin: 0;
+    max-width: 100%;
+    flex: 1 1 auto;
+    text-align: center;
+    border: 0;
+    border-radius: 0;
+    box-shadow: none; }
+  .button-group > :not(:first-child) {
+    border-left: 0.0625rem solid var(--button-group-border-color); }
+  @media screen and (max-width: 499px) {
+    .button-group {
+      flex-direction: column; }
+      .button-group > :not(:first-child) {
+        border: 0;
+        border-top: 0.0625rem solid var(--button-group-border-color); } }
+
+/*
+  Custom elements for forms and input elements.
+*/
+button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary {
+  --button-back-color: #1976d2;
+  --button-fore-color: #f8f8f8; }
+  button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus {
+    --button-hover-back-color: #1565c0; }
+
+button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary {
+  --button-back-color: #d32f2f;
+  --button-fore-color: #f8f8f8; }
+  button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus {
+    --button-hover-back-color: #c62828; }
+
+button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary {
+  --button-back-color: #308732;
+  --button-fore-color: #f8f8f8; }
+  button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus {
+    --button-hover-back-color: #277529; }
+
+button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse {
+  --button-back-color: #212121;
+  --button-fore-color: #f8f8f8; }
+  button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus {
+    --button-hover-back-color: #111; }
+
+button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small {
+  padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding));
+  margin: var(--universal-margin); }
+
+button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large {
+  padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding));
+  margin: var(--universal-margin); }
+
+/*
+  Definitions for navigation elements.
+*/
+/* Navigation module CSS variable definitions */
+:root {
+  --header-back-color: #f8f8f8;
+  --header-hover-back-color: #f0f0f0;
+  --header-fore-color: #444;
+  --header-border-color: #ddd;
+  --nav-back-color: #f8f8f8;
+  --nav-hover-back-color: #f0f0f0;
+  --nav-fore-color: #444;
+  --nav-border-color: #ddd;
+  --nav-link-color: #0277bd;
+  --footer-fore-color: #444;
+  --footer-back-color: #f8f8f8;
+  --footer-border-color: #ddd;
+  --footer-link-color: #0277bd;
+  --drawer-back-color: #f8f8f8;
+  --drawer-hover-back-color: #f0f0f0;
+  --drawer-border-color: #ddd;
+  --drawer-close-color: #444; }
+
+header {
+  height: 3.1875rem;
+  background: var(--header-back-color);
+  color: var(--header-fore-color);
+  border-bottom: 0.0625rem solid var(--header-border-color);
+  padding: calc(var(--universal-padding) / 4) 0;
+  white-space: nowrap;
+  overflow-x: auto;
+  overflow-y: hidden; }
+  header.row {
+    box-sizing: content-box; }
+  header .logo {
+    color: var(--header-fore-color);
+    font-size: 1.75rem;
+    padding: var(--universal-padding) calc(2 * var(--universal-padding));
+    text-decoration: none; }
+  header button, header [type="button"], header .button, header [role="button"] {
+    box-sizing: border-box;
+    position: relative;
+    top: calc(0rem - var(--universal-padding) / 4);
+    height: calc(3.1875rem + var(--universal-padding) / 2);
+    background: var(--header-back-color);
+    line-height: calc(3.1875rem - var(--universal-padding) * 1.5);
+    text-align: center;
+    color: var(--header-fore-color);
+    border: 0;
+    border-radius: 0;
+    margin: 0;
+    text-transform: uppercase; }
+    header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus {
+      background: var(--header-hover-back-color); }
+
+nav {
+  background: var(--nav-back-color);
+  color: var(--nav-fore-color);
+  border: 0.0625rem solid var(--nav-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin); }
+  nav * {
+    padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+  nav a, nav a:visited {
+    display: block;
+    color: var(--nav-link-color);
+    border-radius: var(--universal-border-radius);
+    transition: background 0.3s; }
+    nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus {
+      text-decoration: none;
+      background: var(--nav-hover-back-color); }
+  nav .sublink-1 {
+    position: relative;
+    margin-left: calc(2 * var(--universal-padding)); }
+    nav .sublink-1:before {
+      position: absolute;
+      left: calc(var(--universal-padding) - 1 * var(--universal-padding));
+      top: -0.0625rem;
+      content: '';
+      height: 100%;
+      border: 0.0625rem solid var(--nav-border-color);
+      border-left: 0; }
+  nav .sublink-2 {
+    position: relative;
+    margin-left: calc(4 * var(--universal-padding)); }
+    nav .sublink-2:before {
+      position: absolute;
+      left: calc(var(--universal-padding) - 3 * var(--universal-padding));
+      top: -0.0625rem;
+      content: '';
+      height: 100%;
+      border: 0.0625rem solid var(--nav-border-color);
+      border-left: 0; }
+
+footer {
+  background: var(--footer-back-color);
+  color: var(--footer-fore-color);
+  border-top: 0.0625rem solid var(--footer-border-color);
+  padding: calc(2 * var(--universal-padding)) var(--universal-padding);
+  font-size: 0.875rem; }
+  footer a, footer a:visited {
+    color: var(--footer-link-color); }
+
+header.sticky {
+  position: -webkit-sticky;
+  position: sticky;
+  z-index: 1101;
+  top: 0; }
+
+footer.sticky {
+  position: -webkit-sticky;
+  position: sticky;
+  z-index: 1101;
+  bottom: 0; }
+
+.drawer-toggle:before {
+  display: inline-block;
+  position: relative;
+  vertical-align: bottom;
+  content: '\00a0\2261\00a0';
+  font-family: sans-serif;
+  font-size: 1.5em; }
+@media screen and (min-width: 500px) {
+  .drawer-toggle:not(.persistent) {
+    display: none; } }
+
+[type="checkbox"].drawer {
+  height: 1px;
+  width: 1px;
+  margin: -1px;
+  overflow: hidden;
+  position: absolute;
+  clip: rect(0 0 0 0);
+  -webkit-clip-path: inset(100%);
+  clip-path: inset(100%); }
+  [type="checkbox"].drawer + * {
+    display: block;
+    box-sizing: border-box;
+    position: fixed;
+    top: 0;
+    width: 320px;
+    height: 100vh;
+    overflow-y: auto;
+    background: var(--drawer-back-color);
+    border: 0.0625rem solid var(--drawer-border-color);
+    border-radius: 0;
+    margin: 0;
+    z-index: 1110;
+    right: -320px;
+    transition: right 0.3s; }
+    [type="checkbox"].drawer + * .drawer-close {
+      position: absolute;
+      top: var(--universal-margin);
+      right: var(--universal-margin);
+      z-index: 1111;
+      width: 2rem;
+      height: 2rem;
+      border-radius: var(--universal-border-radius);
+      padding: var(--universal-padding);
+      margin: 0;
+      cursor: pointer;
+      transition: background 0.3s; }
+      [type="checkbox"].drawer + * .drawer-close:before {
+        display: block;
+        content: '\00D7';
+        color: var(--drawer-close-color);
+        position: relative;
+        font-family: sans-serif;
+        font-size: 2rem;
+        line-height: 1;
+        text-align: center; }
+      [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus {
+        background: var(--drawer-hover-back-color); }
+    @media screen and (max-width: 320px) {
+      [type="checkbox"].drawer + * {
+        width: 100%; } }
+  [type="checkbox"].drawer:checked + * {
+    right: 0; }
+  @media screen and (min-width: 500px) {
+    [type="checkbox"].drawer:not(.persistent) + * {
+      position: static;
+      height: 100%;
+      z-index: 1100; }
+      [type="checkbox"].drawer:not(.persistent) + * .drawer-close {
+        display: none; } }
+
+/*
+  Definitions for the responsive table component.
+*/
+/* Table module CSS variable definitions. */
+:root {
+  --table-border-color: #aaa;
+  --table-border-separator-color: #666;
+  --table-head-back-color: #e6e6e6;
+  --table-head-fore-color: #111;
+  --table-body-back-color: #f8f8f8;
+  --table-body-fore-color: #111;
+  --table-body-alt-back-color: #eee; }
+
+table {
+  border-collapse: separate;
+  border-spacing: 0;
+  : margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);
+  display: flex;
+  flex: 0 1 auto;
+  flex-flow: row wrap;
+  padding: var(--universal-padding);
+  padding-top: 0;
+	margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);	}
+  table caption {
+    font-size: 1.25 * rem;
+    margin: calc(2 * var(--universal-margin)) 0;
+    max-width: 100%;
+    flex: 0 0 100%;
+		text-align: left;}
+  table thead, table tbody {
+    display: flex;
+    flex-flow: row wrap;
+    border: 0.0625rem solid var(--table-border-color); }
+  table thead {
+    z-index: 999;
+    border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0;
+    border-bottom: 0.0625rem solid var(--table-border-separator-color); }
+  table tbody {
+    border-top: 0;
+    margin-top: calc(0 - var(--universal-margin));
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+  table tr {
+    display: flex;
+    padding: 0; }
+  table th, table td {
+    padding: calc(0.5 * var(--universal-padding));
+		font-size: 0.9rem; }
+  table th {
+    text-align: left;
+    background: var(--table-head-back-color);
+    color: var(--table-head-fore-color); }
+  table td {
+    background: var(--table-body-back-color);
+    color: var(--table-body-fore-color);
+    border-top: 0.0625rem solid var(--table-border-color); }
+
+table:not(.horizontal) {
+  overflow: auto;
+  max-height: 850px; }
+  table:not(.horizontal) thead, table:not(.horizontal) tbody {
+    max-width: 100%;
+    flex: 0 0 100%; }
+  table:not(.horizontal) tr {
+    flex-flow: row wrap;
+    flex: 0 0 100%; }
+  table:not(.horizontal) th, table:not(.horizontal) td {
+    flex: 1 0 0%;
+    overflow: hidden;
+    text-overflow: ellipsis; }
+  table:not(.horizontal) thead {
+    position: sticky;
+    top: 0; }
+  table:not(.horizontal) tbody tr:first-child td {
+    border-top: 0; }
+
+table.horizontal {
+  border: 0; }
+  table.horizontal thead, table.horizontal tbody {
+    border: 0;
+    flex-flow: row nowrap; }
+  table.horizontal tbody {
+    overflow: auto;
+    justify-content: space-between;
+    flex: 1 0 0;
+    margin-left: calc( 4 * var(--universal-margin));
+    padding-bottom: calc(var(--universal-padding) / 4); }
+  table.horizontal tr {
+    flex-direction: column;
+    flex: 1 0 auto; }
+  table.horizontal th, table.horizontal td {
+    width: 100%;
+    border: 0;
+    border-bottom: 0.0625rem solid var(--table-border-color); }
+    table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) {
+      border-top: 0; }
+  table.horizontal th {
+    text-align: right;
+    border-left: 0.0625rem solid var(--table-border-color);
+    border-right: 0.0625rem solid var(--table-border-separator-color); }
+  table.horizontal thead tr:first-child {
+    padding-left: 0; }
+  table.horizontal th:first-child, table.horizontal td:first-child {
+    border-top: 0.0625rem solid var(--table-border-color); }
+  table.horizontal tbody tr:last-child td {
+    border-right: 0.0625rem solid var(--table-border-color); }
+    table.horizontal tbody tr:last-child td:first-child {
+      border-top-right-radius: 0.25rem; }
+    table.horizontal tbody tr:last-child td:last-child {
+      border-bottom-right-radius: 0.25rem; }
+  table.horizontal thead tr:first-child th:first-child {
+    border-top-left-radius: 0.25rem; }
+  table.horizontal thead tr:first-child th:last-child {
+    border-bottom-left-radius: 0.25rem; }
+
+@media screen and (max-width: 499px) {
+  table, table.horizontal {
+    border-collapse: collapse;
+    border: 0;
+    width: 100%;
+    display: table; }
+    table thead, table th, table.horizontal thead, table.horizontal th {
+      border: 0;
+      height: 1px;
+      width: 1px;
+      margin: -1px;
+      overflow: hidden;
+      padding: 0;
+      position: absolute;
+      clip: rect(0 0 0 0);
+      -webkit-clip-path: inset(100%);
+      clip-path: inset(100%); }
+    table tbody, table.horizontal tbody {
+      border: 0;
+      display: table-row-group; }
+    table tr, table.horizontal tr {
+      display: block;
+      border: 0.0625rem solid var(--table-border-color);
+      border-radius: var(--universal-border-radius);
+      background: #fafafa;
+      padding: var(--universal-padding);
+      margin: var(--universal-margin);
+      margin-bottom: calc(2 * var(--universal-margin)); }
+    table th, table td, table.horizontal th, table.horizontal td {
+      width: auto; }
+    table td, table.horizontal td {
+      display: block;
+      border: 0;
+      text-align: right; }
+    table td:before, table.horizontal td:before {
+      content: attr(data-label);
+      float: left;
+      font-weight: 600; }
+    table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child {
+      border-top: 0; }
+    table tbody tr:last-child td, table.horizontal tbody tr:last-child td {
+      border-right: 0; } }
+:root {
+  --table-body-alt-back-color: #eee; }
+
+table tr:nth-of-type(2n) > td {
+  background: var(--table-body-alt-back-color); }
+
+@media screen and (max-width: 500px) {
+  table tr:nth-of-type(2n) {
+    background: var(--table-body-alt-back-color); } }
+:root {
+  --table-body-hover-back-color: #90caf9; }
+
+table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+  background: var(--table-body-hover-back-color); }
+
+@media screen and (max-width: 500px) {
+  table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+    background: var(--table-body-hover-back-color); } }
+/*
+  Definitions for contextual background elements, toasts and tooltips.
+*/
+/* Contextual module CSS variable definitions */
+:root {
+  --mark-back-color: #0277bd;
+  --mark-fore-color: #fafafa; }
+
+mark {
+  background: var(--mark-back-color);
+  color: var(--mark-fore-color);
+  font-size: 0.95em;
+  line-height: 1em;
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+  mark.inline-block {
+    display: inline-block;
+    font-size: 1em;
+    line-height: 1.5;
+    padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+:root {
+  --toast-back-color: #424242;
+  --toast-fore-color: #fafafa; }
+
+.toast {
+  position: fixed;
+  bottom: calc(var(--universal-margin) * 3);
+  left: 50%;
+  transform: translate(-50%, -50%);
+  z-index: 1111;
+  color: var(--toast-fore-color);
+  background: var(--toast-back-color);
+  border-radius: calc(var(--universal-border-radius) * 16);
+  padding: var(--universal-padding) calc(var(--universal-padding) * 3); }
+
+:root {
+  --tooltip-back-color: #212121;
+  --tooltip-fore-color: #fafafa; }
+
+.tooltip {
+  position: relative;
+  display: inline-block; }
+  .tooltip:before, .tooltip:after {
+    position: absolute;
+    opacity: 0;
+    clip: rect(0 0 0 0);
+    -webkit-clip-path: inset(100%);
+    clip-path: inset(100%);
+    transition: all 0.3s;
+    z-index: 1010;
+    left: 50%; }
+  .tooltip:not(.bottom):before, .tooltip:not(.bottom):after {
+    bottom: 75%; }
+  .tooltip.bottom:before, .tooltip.bottom:after {
+    top: 75%; }
+  .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after {
+    opacity: 1;
+    clip: auto;
+    -webkit-clip-path: inset(0%);
+    clip-path: inset(0%); }
+  .tooltip:before {
+    content: '';
+    background: transparent;
+    border: var(--universal-margin) solid transparent;
+    left: calc(50% - var(--universal-margin)); }
+  .tooltip:not(.bottom):before {
+    border-top-color: #212121; }
+  .tooltip.bottom:before {
+    border-bottom-color: #212121; }
+  .tooltip:after {
+    content: attr(aria-label);
+    color: var(--tooltip-fore-color);
+    background: var(--tooltip-back-color);
+    border-radius: var(--universal-border-radius);
+    padding: var(--universal-padding);
+    white-space: nowrap;
+    transform: translateX(-50%); }
+  .tooltip:not(.bottom):after {
+    margin-bottom: calc(2 * var(--universal-margin)); }
+  .tooltip.bottom:after {
+    margin-top: calc(2 * var(--universal-margin)); }
+
+:root {
+  --modal-overlay-color: rgba(0, 0, 0, 0.45);
+  --modal-close-color: #444;
+  --modal-close-hover-color: #f0f0f0; }
+
+[type="checkbox"].modal {
+  height: 1px;
+  width: 1px;
+  margin: -1px;
+  overflow: hidden;
+  position: absolute;
+  clip: rect(0 0 0 0);
+  -webkit-clip-path: inset(100%);
+  clip-path: inset(100%); }
+  [type="checkbox"].modal + div {
+    position: fixed;
+    top: 0;
+    left: 0;
+    display: none;
+    width: 100vw;
+    height: 100vh;
+    background: var(--modal-overlay-color); }
+    [type="checkbox"].modal + div .card {
+      margin: 0 auto;
+      max-height: 50vh;
+      overflow: auto; }
+      [type="checkbox"].modal + div .card .modal-close {
+        position: absolute;
+        top: 0;
+        right: 0;
+        width: 1.75rem;
+        height: 1.75rem;
+        border-radius: var(--universal-border-radius);
+        padding: var(--universal-padding);
+        margin: 0;
+        cursor: pointer;
+        transition: background 0.3s; }
+        [type="checkbox"].modal + div .card .modal-close:before {
+          display: block;
+          content: '\00D7';
+          color: var(--modal-close-color);
+          position: relative;
+          font-family: sans-serif;
+          font-size: 1.75rem;
+          line-height: 1;
+          text-align: center; }
+        [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus {
+          background: var(--modal-close-hover-color); }
+  [type="checkbox"].modal:checked + div {
+    display: flex;
+    flex: 0 1 auto;
+    z-index: 1200; }
+    [type="checkbox"].modal:checked + div .card .modal-close {
+      z-index: 1211; }
+
+:root {
+  --collapse-label-back-color: #e8e8e8;
+  --collapse-label-fore-color: #212121;
+  --collapse-label-hover-back-color: #f0f0f0;
+  --collapse-selected-label-back-color: #ececec;
+  --collapse-border-color: #ddd;
+  --collapse-content-back-color: #fafafa;
+  --collapse-selected-label-border-color: #0277bd; }
+
+.collapse {
+  width: calc(100% - 2 * var(--universal-margin));
+  opacity: 1;
+  display: flex;
+  flex-direction: column;
+  margin: var(--universal-margin);
+  border-radius: var(--universal-border-radius); }
+  .collapse > [type="radio"], .collapse > [type="checkbox"] {
+    height: 1px;
+    width: 1px;
+    margin: -1px;
+    overflow: hidden;
+    position: absolute;
+    clip: rect(0 0 0 0);
+    -webkit-clip-path: inset(100%);
+    clip-path: inset(100%); }
+  .collapse > label {
+    flex-grow: 1;
+    display: inline-block;
+    height: 1.5rem;
+    cursor: pointer;
+    transition: background 0.3s;
+    color: var(--collapse-label-fore-color);
+    background: var(--collapse-label-back-color);
+    border: 0.0625rem solid var(--collapse-border-color);
+    padding: calc(1.5 * var(--universal-padding)); }
+    .collapse > label:hover, .collapse > label:focus {
+      background: var(--collapse-label-hover-back-color); }
+    .collapse > label + div {
+      flex-basis: auto;
+      height: 1px;
+      width: 1px;
+      margin: -1px;
+      overflow: hidden;
+      position: absolute;
+      clip: rect(0 0 0 0);
+      -webkit-clip-path: inset(100%);
+      clip-path: inset(100%);
+      transition: max-height 0.3s;
+      max-height: 1px; }
+  .collapse > :checked + label {
+    background: var(--collapse-selected-label-back-color);
+    border-bottom-color: var(--collapse-selected-label-border-color); }
+    .collapse > :checked + label + div {
+      box-sizing: border-box;
+      position: relative;
+      width: 100%;
+      height: auto;
+      overflow: auto;
+      margin: 0;
+      background: var(--collapse-content-back-color);
+      border: 0.0625rem solid var(--collapse-border-color);
+      border-top: 0;
+      padding: var(--universal-padding);
+      clip: auto;
+      -webkit-clip-path: inset(0%);
+      clip-path: inset(0%);
+      max-height: 850px; }
+  .collapse > label:not(:first-of-type) {
+    border-top: 0; }
+  .collapse > label:first-of-type {
+    border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; }
+  .collapse > label:last-of-type:not(:first-of-type) {
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+  .collapse > label:last-of-type:first-of-type {
+    border-radius: var(--universal-border-radius); }
+  .collapse > :checked:last-of-type:not(:first-of-type) + label {
+    border-radius: 0; }
+  .collapse > :checked:last-of-type + label + div {
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+
+/*
+  Custom elements for contextual background elements, toasts and tooltips.
+*/
+mark.secondary {
+  --mark-back-color: #d32f2f; }
+
+mark.tertiary {
+  --mark-back-color: #308732; }
+
+mark.tag {
+  padding: calc(var(--universal-padding)/2) var(--universal-padding);
+  border-radius: 1em; }
+
+/*
+  Definitions for progress elements and spinners.
+*/
+/* Progress module CSS variable definitions */
+:root {
+  --progress-back-color: #ddd;
+  --progress-fore-color: #555; }
+
+progress {
+  display: block;
+  vertical-align: baseline;
+  -webkit-appearance: none;
+  -moz-appearance: none;
+  appearance: none;
+  height: 0.75rem;
+  width: calc(100% - 2 * var(--universal-margin));
+  margin: var(--universal-margin);
+  border: 0;
+  border-radius: calc(2 * var(--universal-border-radius));
+  background: var(--progress-back-color);
+  color: var(--progress-fore-color); }
+  progress::-webkit-progress-value {
+    background: var(--progress-fore-color);
+    border-top-left-radius: calc(2 * var(--universal-border-radius));
+    border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+  progress::-webkit-progress-bar {
+    background: var(--progress-back-color); }
+  progress::-moz-progress-bar {
+    background: var(--progress-fore-color);
+    border-top-left-radius: calc(2 * var(--universal-border-radius));
+    border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+  progress[value="1000"]::-webkit-progress-value {
+    border-radius: calc(2 * var(--universal-border-radius)); }
+  progress[value="1000"]::-moz-progress-bar {
+    border-radius: calc(2 * var(--universal-border-radius)); }
+  progress.inline {
+    display: inline-block;
+    vertical-align: middle;
+    width: 60%; }
+
+:root {
+  --spinner-back-color: #ddd;
+  --spinner-fore-color: #555; }
+
+@keyframes spinner-donut-anim {
+  0% {
+    transform: rotate(0deg); }
+  100% {
+    transform: rotate(360deg); } }
+.spinner {
+  display: inline-block;
+  margin: var(--universal-margin);
+  border: 0.25rem solid var(--spinner-back-color);
+  border-left: 0.25rem solid var(--spinner-fore-color);
+  border-radius: 50%;
+  width: 1.25rem;
+  height: 1.25rem;
+  animation: spinner-donut-anim 1.2s linear infinite; }
+
+/*
+  Custom elements for progress bars and spinners.
+*/
+progress.primary {
+  --progress-fore-color: #1976d2; }
+
+progress.secondary {
+  --progress-fore-color: #d32f2f; }
+
+progress.tertiary {
+  --progress-fore-color: #308732; }
+
+.spinner.primary {
+  --spinner-fore-color: #1976d2; }
+
+.spinner.secondary {
+  --spinner-fore-color: #d32f2f; }
+
+.spinner.tertiary {
+  --spinner-fore-color: #308732; }
+
+/*
+  Definitions for icons - powered by Feather (https://feathericons.com/).
+*/
+span[class^='icon-'] {
+  display: inline-block;
+  height: 1em;
+  width: 1em;
+  vertical-align: -0.125em;
+  background-size: contain;
+  margin: 0 calc(var(--universal-margin) / 4); }
+  span[class^='icon-'].secondary {
+    -webkit-filter: invert(25%);
+    filter: invert(25%); }
+  span[class^='icon-'].inverse {
+    -webkit-filter: invert(100%);
+    filter: invert(100%); }
+
+span.icon-alert {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-bookmark {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-calendar {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-credit {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-edit {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); }
+span.icon-link {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-help {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-home {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-info {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-lock {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-mail {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-location {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-phone {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-rss {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-search {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-settings {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-share {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-cart {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-upload {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-user {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); }
+
+/*
+  Definitions for utilities and helper classes.
+*/
+/* Utility module CSS variable definitions */
+:root {
+  --generic-border-color: rgba(0, 0, 0, 0.3);
+  --generic-box-shadow: 0 0.25rem 0.25rem 0 rgba(0, 0, 0, 0.125), 0 0.125rem 0.125rem -0.125rem rgba(0, 0, 0, 0.25); }
+
+.hidden {
+  display: none !important; }
+
+.visually-hidden {
+  position: absolute !important;
+  width: 1px !important;
+  height: 1px !important;
+  margin: -1px !important;
+  border: 0 !important;
+  padding: 0 !important;
+  clip: rect(0 0 0 0) !important;
+  -webkit-clip-path: inset(100%) !important;
+  clip-path: inset(100%) !important;
+  overflow: hidden !important; }
+
+.bordered {
+  border: 0.0625rem solid var(--generic-border-color) !important; }
+
+.rounded {
+  border-radius: var(--universal-border-radius) !important; }
+
+.circular {
+  border-radius: 50% !important; }
+
+.shadowed {
+  box-shadow: var(--generic-box-shadow) !important; }
+
+.responsive-margin {
+  margin: calc(var(--universal-margin) / 4) !important; }
+  @media screen and (min-width: 500px) {
+    .responsive-margin {
+      margin: calc(var(--universal-margin) / 2) !important; } }
+  @media screen and (min-width: 1280px) {
+    .responsive-margin {
+      margin: var(--universal-margin) !important; } }
+
+.responsive-padding {
+  padding: calc(var(--universal-padding) / 4) !important; }
+  @media screen and (min-width: 500px) {
+    .responsive-padding {
+      padding: calc(var(--universal-padding) / 2) !important; } }
+  @media screen and (min-width: 1280px) {
+    .responsive-padding {
+      padding: var(--universal-padding) !important; } }
+
+@media screen and (max-width: 499px) {
+  .hidden-sm {
+    display: none !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+  .hidden-md {
+    display: none !important; } }
+@media screen and (min-width: 1280px) {
+  .hidden-lg {
+    display: none !important; } }
+@media screen and (max-width: 499px) {
+  .visually-hidden-sm {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+  .visually-hidden-md {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+@media screen and (min-width: 1280px) {
+  .visually-hidden-lg {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+
+/*# sourceMappingURL=mini-default.css.map */
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/mini-st_2020.css b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/mini-st_2020.css
new file mode 100644
index 0000000..edbc116
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/mini-st_2020.css
@@ -0,0 +1,1703 @@
+@charset "UTF-8";
+/*
+  Flavor name: Custom (mini-custom)
+  Generated online - https://minicss.org/flavors
+  mini.css version: v3.0.1
+*/
+/*
+  Browsers resets and base typography.
+*/
+/* Core module CSS variable definitions */
+:root {
+  --fore-color: #03234b;
+  --secondary-fore-color: #03234b;
+  --back-color: #ffffff;
+  --secondary-back-color: #ffffff;
+  --blockquote-color: #e6007e;
+  --pre-color: #e6007e;
+  --border-color: #3cb4e6;
+  --secondary-border-color: #3cb4e6;
+  --heading-ratio: 1.2;
+  --universal-margin: 0.5rem;
+  --universal-padding: 0.25rem;
+  --universal-border-radius: 0.075rem;
+  --background-margin: 1.5%;
+  --a-link-color: #3cb4e6;
+  --a-visited-color: #8c0078; }
+
+html {
+  font-size: 13.5px; }
+
+a, b, del, em, i, ins, q, span, strong, u {
+  font-size: 1em; }
+
+html, * {
+  font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif;
+  line-height: 1.25;
+  -webkit-text-size-adjust: 100%; }
+
+* {
+  font-size: 1rem; }
+
+body {
+  margin: 0;
+  color: var(--fore-color);
+  @background: var(--back-color);
+  background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top;
+  background-size: var(--background-margin);
+  }
+
+details {
+  display: block; }
+
+summary {
+  display: list-item; }
+
+abbr[title] {
+  border-bottom: none;
+  text-decoration: underline dotted; }
+
+input {
+  overflow: visible; }
+
+img {
+  max-width: 100%;
+  height: auto; }
+
+h1, h2, h3, h4, h5, h6 {
+  line-height: 1.25;
+  margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);
+  font-weight: 400; }
+  h1 small, h2 small, h3 small, h4 small, h5 small, h6 small {
+    color: var(--secondary-fore-color);
+    display: block;
+    margin-top: -0.25rem; }
+
+h1 {
+  font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); }
+
+h2 {
+  font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) );
+  border-style: none none solid none ; 
+  border-width: thin;
+  border-color: var(--border-color); }
+h3 {
+  font-size: calc(1rem * var(--heading-ratio) ); }
+
+h4 {
+  font-size: calc(1rem * var(--heading-ratio)); }
+
+h5 {
+  font-size: 1rem; }
+
+h6 {
+  font-size: calc(1rem / var(--heading-ratio)); }
+
+p {
+  margin: var(--universal-margin); }
+
+ol, ul {
+  margin: var(--universal-margin);
+  padding-left: calc(3 * var(--universal-margin)); }
+
+b, strong {
+  font-weight: 700; }
+
+hr {
+  box-sizing: content-box;
+  border: 0;
+  line-height: 1.25em;
+  margin: var(--universal-margin);
+  height: 0.0714285714rem;
+  background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); }
+
+blockquote {
+  display: block;
+  position: relative;
+  font-style: italic;
+  color: var(--secondary-fore-color);
+  margin: var(--universal-margin);
+  padding: calc(3 * var(--universal-padding));
+  border: 0.0714285714rem solid var(--secondary-border-color);
+  border-left: 0.3rem solid var(--blockquote-color);
+  border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+  blockquote:before {
+    position: absolute;
+    top: calc(0rem - var(--universal-padding));
+    left: 0;
+    font-family: sans-serif;
+    font-size: 2rem;
+    font-weight: 800;
+    content: "\201c";
+    color: var(--blockquote-color); }
+  blockquote[cite]:after {
+    font-style: normal;
+    font-size: 0.75em;
+    font-weight: 700;
+    content: "\a—  " attr(cite);
+    white-space: pre; }
+
+code, kbd, pre, samp {
+  font-family: Menlo, Consolas, monospace;
+  font-size: 0.85em; }
+
+code {
+  background: var(--secondary-back-color);
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+kbd {
+  background: var(--fore-color);
+  color: var(--back-color);
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+pre {
+  overflow: auto;
+  background: var(--secondary-back-color);
+  padding: calc(1.5 * var(--universal-padding));
+  margin: var(--universal-margin);
+  border: 0.0714285714rem solid var(--secondary-border-color);
+  border-left: 0.2857142857rem solid var(--pre-color);
+  border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+
+sup, sub, code, kbd {
+  line-height: 0;
+  position: relative;
+  vertical-align: baseline; }
+
+small, sup, sub, figcaption {
+  font-size: 0.75em; }
+
+sup {
+  top: -0.5em; }
+
+sub {
+  bottom: -0.25em; }
+
+figure {
+  margin: var(--universal-margin); }
+
+figcaption {
+  color: var(--secondary-fore-color); }
+
+a {
+  text-decoration: none; }
+  a:link {
+    color: var(--a-link-color); }
+  a:visited {
+    color: var(--a-visited-color); }
+  a:hover, a:focus {
+    text-decoration: underline; }
+
+/*
+  Definitions for the grid system, cards and containers.
+*/
+.container {
+  margin: 0 auto;
+  padding: 0 calc(1.5 * var(--universal-padding)); }
+
+.row {
+  box-sizing: border-box;
+  display: flex;
+  flex: 0 1 auto;
+  flex-flow: row wrap;
+  margin: 0 0 0 var(--background-margin); }
+
+.col-sm,
+[class^='col-sm-'],
+[class^='col-sm-offset-'],
+.row[class*='cols-sm-'] > * {
+  box-sizing: border-box;
+  flex: 0 0 auto;
+  padding: 0 calc(var(--universal-padding) / 2); }
+
+.col-sm,
+.row.cols-sm > * {
+  max-width: 100%;
+  flex-grow: 1;
+  flex-basis: 0; }
+
+.col-sm-1,
+.row.cols-sm-1 > * {
+  max-width: 8.3333333333%;
+  flex-basis: 8.3333333333%; }
+
+.col-sm-offset-0 {
+  margin-left: 0; }
+
+.col-sm-2,
+.row.cols-sm-2 > * {
+  max-width: 16.6666666667%;
+  flex-basis: 16.6666666667%; }
+
+.col-sm-offset-1 {
+  margin-left: 8.3333333333%; }
+
+.col-sm-3,
+.row.cols-sm-3 > * {
+  max-width: 25%;
+  flex-basis: 25%; }
+
+.col-sm-offset-2 {
+  margin-left: 16.6666666667%; }
+
+.col-sm-4,
+.row.cols-sm-4 > * {
+  max-width: 33.3333333333%;
+  flex-basis: 33.3333333333%; }
+
+.col-sm-offset-3 {
+  margin-left: 25%; }
+
+.col-sm-5,
+.row.cols-sm-5 > * {
+  max-width: 41.6666666667%;
+  flex-basis: 41.6666666667%; }
+
+.col-sm-offset-4 {
+  margin-left: 33.3333333333%; }
+
+.col-sm-6,
+.row.cols-sm-6 > * {
+  max-width: 50%;
+  flex-basis: 50%; }
+
+.col-sm-offset-5 {
+  margin-left: 41.6666666667%; }
+
+.col-sm-7,
+.row.cols-sm-7 > * {
+  max-width: 58.3333333333%;
+  flex-basis: 58.3333333333%; }
+
+.col-sm-offset-6 {
+  margin-left: 50%; }
+
+.col-sm-8,
+.row.cols-sm-8 > * {
+  max-width: 66.6666666667%;
+  flex-basis: 66.6666666667%; }
+
+.col-sm-offset-7 {
+  margin-left: 58.3333333333%; }
+
+.col-sm-9,
+.row.cols-sm-9 > * {
+  max-width: 75%;
+  flex-basis: 75%; }
+
+.col-sm-offset-8 {
+  margin-left: 66.6666666667%; }
+
+.col-sm-10,
+.row.cols-sm-10 > * {
+  max-width: 83.3333333333%;
+  flex-basis: 83.3333333333%; }
+
+.col-sm-offset-9 {
+  margin-left: 75%; }
+
+.col-sm-11,
+.row.cols-sm-11 > * {
+  max-width: 91.6666666667%;
+  flex-basis: 91.6666666667%; }
+
+.col-sm-offset-10 {
+  margin-left: 83.3333333333%; }
+
+.col-sm-12,
+.row.cols-sm-12 > * {
+  max-width: 100%;
+  flex-basis: 100%; }
+
+.col-sm-offset-11 {
+  margin-left: 91.6666666667%; }
+
+.col-sm-normal {
+  order: initial; }
+
+.col-sm-first {
+  order: -999; }
+
+.col-sm-last {
+  order: 999; }
+
+@media screen and (min-width: 500px) {
+  .col-md,
+  [class^='col-md-'],
+  [class^='col-md-offset-'],
+  .row[class*='cols-md-'] > * {
+    box-sizing: border-box;
+    flex: 0 0 auto;
+    padding: 0 calc(var(--universal-padding) / 2); }
+
+  .col-md,
+  .row.cols-md > * {
+    max-width: 100%;
+    flex-grow: 1;
+    flex-basis: 0; }
+
+  .col-md-1,
+  .row.cols-md-1 > * {
+    max-width: 8.3333333333%;
+    flex-basis: 8.3333333333%; }
+
+  .col-md-offset-0 {
+    margin-left: 0; }
+
+  .col-md-2,
+  .row.cols-md-2 > * {
+    max-width: 16.6666666667%;
+    flex-basis: 16.6666666667%; }
+
+  .col-md-offset-1 {
+    margin-left: 8.3333333333%; }
+
+  .col-md-3,
+  .row.cols-md-3 > * {
+    max-width: 25%;
+    flex-basis: 25%; }
+
+  .col-md-offset-2 {
+    margin-left: 16.6666666667%; }
+
+  .col-md-4,
+  .row.cols-md-4 > * {
+    max-width: 33.3333333333%;
+    flex-basis: 33.3333333333%; }
+
+  .col-md-offset-3 {
+    margin-left: 25%; }
+
+  .col-md-5,
+  .row.cols-md-5 > * {
+    max-width: 41.6666666667%;
+    flex-basis: 41.6666666667%; }
+
+  .col-md-offset-4 {
+    margin-left: 33.3333333333%; }
+
+  .col-md-6,
+  .row.cols-md-6 > * {
+    max-width: 50%;
+    flex-basis: 50%; }
+
+  .col-md-offset-5 {
+    margin-left: 41.6666666667%; }
+
+  .col-md-7,
+  .row.cols-md-7 > * {
+    max-width: 58.3333333333%;
+    flex-basis: 58.3333333333%; }
+
+  .col-md-offset-6 {
+    margin-left: 50%; }
+
+  .col-md-8,
+  .row.cols-md-8 > * {
+    max-width: 66.6666666667%;
+    flex-basis: 66.6666666667%; }
+
+  .col-md-offset-7 {
+    margin-left: 58.3333333333%; }
+
+  .col-md-9,
+  .row.cols-md-9 > * {
+    max-width: 75%;
+    flex-basis: 75%; }
+
+  .col-md-offset-8 {
+    margin-left: 66.6666666667%; }
+
+  .col-md-10,
+  .row.cols-md-10 > * {
+    max-width: 83.3333333333%;
+    flex-basis: 83.3333333333%; }
+
+  .col-md-offset-9 {
+    margin-left: 75%; }
+
+  .col-md-11,
+  .row.cols-md-11 > * {
+    max-width: 91.6666666667%;
+    flex-basis: 91.6666666667%; }
+
+  .col-md-offset-10 {
+    margin-left: 83.3333333333%; }
+
+  .col-md-12,
+  .row.cols-md-12 > * {
+    max-width: 100%;
+    flex-basis: 100%; }
+
+  .col-md-offset-11 {
+    margin-left: 91.6666666667%; }
+
+  .col-md-normal {
+    order: initial; }
+
+  .col-md-first {
+    order: -999; }
+
+  .col-md-last {
+    order: 999; } }
+@media screen and (min-width: 1280px) {
+  .col-lg,
+  [class^='col-lg-'],
+  [class^='col-lg-offset-'],
+  .row[class*='cols-lg-'] > * {
+    box-sizing: border-box;
+    flex: 0 0 auto;
+    padding: 0 calc(var(--universal-padding) / 2); }
+
+  .col-lg,
+  .row.cols-lg > * {
+    max-width: 100%;
+    flex-grow: 1;
+    flex-basis: 0; }
+
+  .col-lg-1,
+  .row.cols-lg-1 > * {
+    max-width: 8.3333333333%;
+    flex-basis: 8.3333333333%; }
+
+  .col-lg-offset-0 {
+    margin-left: 0; }
+
+  .col-lg-2,
+  .row.cols-lg-2 > * {
+    max-width: 16.6666666667%;
+    flex-basis: 16.6666666667%; }
+
+  .col-lg-offset-1 {
+    margin-left: 8.3333333333%; }
+
+  .col-lg-3,
+  .row.cols-lg-3 > * {
+    max-width: 25%;
+    flex-basis: 25%; }
+
+  .col-lg-offset-2 {
+    margin-left: 16.6666666667%; }
+
+  .col-lg-4,
+  .row.cols-lg-4 > * {
+    max-width: 33.3333333333%;
+    flex-basis: 33.3333333333%; }
+
+  .col-lg-offset-3 {
+    margin-left: 25%; }
+
+  .col-lg-5,
+  .row.cols-lg-5 > * {
+    max-width: 41.6666666667%;
+    flex-basis: 41.6666666667%; }
+
+  .col-lg-offset-4 {
+    margin-left: 33.3333333333%; }
+
+  .col-lg-6,
+  .row.cols-lg-6 > * {
+    max-width: 50%;
+    flex-basis: 50%; }
+
+  .col-lg-offset-5 {
+    margin-left: 41.6666666667%; }
+
+  .col-lg-7,
+  .row.cols-lg-7 > * {
+    max-width: 58.3333333333%;
+    flex-basis: 58.3333333333%; }
+
+  .col-lg-offset-6 {
+    margin-left: 50%; }
+
+  .col-lg-8,
+  .row.cols-lg-8 > * {
+    max-width: 66.6666666667%;
+    flex-basis: 66.6666666667%; }
+
+  .col-lg-offset-7 {
+    margin-left: 58.3333333333%; }
+
+  .col-lg-9,
+  .row.cols-lg-9 > * {
+    max-width: 75%;
+    flex-basis: 75%; }
+
+  .col-lg-offset-8 {
+    margin-left: 66.6666666667%; }
+
+  .col-lg-10,
+  .row.cols-lg-10 > * {
+    max-width: 83.3333333333%;
+    flex-basis: 83.3333333333%; }
+
+  .col-lg-offset-9 {
+    margin-left: 75%; }
+
+  .col-lg-11,
+  .row.cols-lg-11 > * {
+    max-width: 91.6666666667%;
+    flex-basis: 91.6666666667%; }
+
+  .col-lg-offset-10 {
+    margin-left: 83.3333333333%; }
+
+  .col-lg-12,
+  .row.cols-lg-12 > * {
+    max-width: 100%;
+    flex-basis: 100%; }
+
+  .col-lg-offset-11 {
+    margin-left: 91.6666666667%; }
+
+  .col-lg-normal {
+    order: initial; }
+
+  .col-lg-first {
+    order: -999; }
+
+  .col-lg-last {
+    order: 999; } }
+/* Card component CSS variable definitions */
+:root {
+  --card-back-color: #3cb4e6;
+  --card-fore-color: #03234b;
+  --card-border-color: #03234b; }
+
+.card {
+  display: flex;
+  flex-direction: column;
+  justify-content: space-between;
+  align-self: center;
+  position: relative;
+  width: 100%;
+  background: var(--card-back-color);
+  color: var(--card-fore-color);
+  border: 0.0714285714rem solid var(--card-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin);
+  overflow: hidden; }
+  @media screen and (min-width: 320px) {
+    .card {
+      max-width: 320px; } }
+  .card > .sectione {
+    background: var(--card-back-color);
+    color: var(--card-fore-color);
+    box-sizing: border-box;
+    margin: 0;
+    border: 0;
+    border-radius: 0;
+    border-bottom: 0.0714285714rem solid var(--card-border-color);
+    padding: var(--universal-padding);
+    width: 100%; }
+    .card > .sectione.media {
+      height: 200px;
+      padding: 0;
+      -o-object-fit: cover;
+      object-fit: cover; }
+  .card > .sectione:last-child {
+    border-bottom: 0; }
+
+/*
+  Custom elements for card elements.
+*/
+@media screen and (min-width: 240px) {
+  .card.small {
+    max-width: 240px; } }
+@media screen and (min-width: 480px) {
+  .card.large {
+    max-width: 480px; } }
+.card.fluid {
+  max-width: 100%;
+  width: auto; }
+
+.card.warning {
+  --card-back-color: #e5b8b7;
+  --card-fore-color: #3b234b;
+  --card-border-color: #8c0078; }
+
+.card.error {
+  --card-back-color: #464650;
+  --card-fore-color: #ffffff;
+  --card-border-color: #8c0078; }
+
+.card > .sectione.dark {
+  --card-back-color: #3b234b;
+  --card-fore-color: #ffffff; }
+
+.card > .sectione.double-padded {
+  padding: calc(1.5 * var(--universal-padding)); }
+
+/*
+  Definitions for forms and input elements.
+*/
+/* Input_control module CSS variable definitions */
+:root {
+  --form-back-color: #ffe97f;
+  --form-fore-color: #03234b;
+  --form-border-color: #3cb4e6;
+  --input-back-color: #ffffff;
+  --input-fore-color: #03234b;
+  --input-border-color: #3cb4e6;
+  --input-focus-color: #0288d1;
+  --input-invalid-color: #d32f2f;
+  --button-back-color: #e2e2e2;
+  --button-hover-back-color: #dcdcdc;
+  --button-fore-color: #212121;
+  --button-border-color: transparent;
+  --button-hover-border-color: transparent;
+  --button-group-border-color: rgba(124, 124, 124, 0.54); }
+
+form {
+  background: var(--form-back-color);
+  color: var(--form-fore-color);
+  border: 0.0714285714rem solid var(--form-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin);
+  padding: calc(2 * var(--universal-padding)) var(--universal-padding); }
+
+fieldset {
+  border: 0.0714285714rem solid var(--form-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: calc(var(--universal-margin) / 4);
+  padding: var(--universal-padding); }
+
+legend {
+  box-sizing: border-box;
+  display: table;
+  max-width: 100%;
+  white-space: normal;
+  font-weight: 500;
+  padding: calc(var(--universal-padding) / 2); }
+
+label {
+  padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+.input-group {
+  display: inline-block; }
+  .input-group.fluid {
+    display: flex;
+    align-items: center;
+    justify-content: center; }
+    .input-group.fluid > input {
+      max-width: 100%;
+      flex-grow: 1;
+      flex-basis: 0px; }
+    @media screen and (max-width: 499px) {
+      .input-group.fluid {
+        align-items: stretch;
+        flex-direction: column; } }
+  .input-group.vertical {
+    display: flex;
+    align-items: stretch;
+    flex-direction: column; }
+    .input-group.vertical > input {
+      max-width: 100%;
+      flex-grow: 1;
+      flex-basis: 0px; }
+
+[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button {
+  height: auto; }
+
+[type="search"] {
+  -webkit-appearance: textfield;
+  outline-offset: -2px; }
+
+[type="search"]::-webkit-search-cancel-button,
+[type="search"]::-webkit-search-decoration {
+  -webkit-appearance: none; }
+
+input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"],
+[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select {
+  box-sizing: border-box;
+  background: var(--input-back-color);
+  color: var(--input-fore-color);
+  border: 0.0714285714rem solid var(--input-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: calc(var(--universal-margin) / 2);
+  padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus {
+  border-color: var(--input-focus-color);
+  box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid {
+  border-color: var(--input-invalid-color);
+  box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] {
+  background: var(--secondary-back-color); }
+
+select {
+  max-width: 100%; }
+
+option {
+  overflow: hidden;
+  text-overflow: ellipsis; }
+
+[type="checkbox"], [type="radio"] {
+  -webkit-appearance: none;
+  -moz-appearance: none;
+  appearance: none;
+  position: relative;
+  height: calc(1rem + var(--universal-padding) / 2);
+  width: calc(1rem + var(--universal-padding) / 2);
+  vertical-align: text-bottom;
+  padding: 0;
+  flex-basis: calc(1rem + var(--universal-padding) / 2) !important;
+  flex-grow: 0 !important; }
+  [type="checkbox"]:checked:before, [type="radio"]:checked:before {
+    position: absolute; }
+
+[type="checkbox"]:checked:before {
+  content: '\2713';
+  font-family: sans-serif;
+  font-size: calc(1rem + var(--universal-padding) / 2);
+  top: calc(0rem - var(--universal-padding));
+  left: calc(var(--universal-padding) / 4); }
+
+[type="radio"] {
+  border-radius: 100%; }
+  [type="radio"]:checked:before {
+    border-radius: 100%;
+    content: '';
+    top: calc(0.0714285714rem + var(--universal-padding) / 2);
+    left: calc(0.0714285714rem + var(--universal-padding) / 2);
+    background: var(--input-fore-color);
+    width: 0.5rem;
+    height: 0.5rem; }
+
+:placeholder-shown {
+  color: var(--input-fore-color); }
+
+::-ms-placeholder {
+  color: var(--input-fore-color);
+  opacity: 0.54; }
+
+button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner {
+  border-style: none;
+  padding: 0; }
+
+button, html [type="button"], [type="reset"], [type="submit"] {
+  -webkit-appearance: button; }
+
+button {
+  overflow: visible;
+  text-transform: none; }
+
+button, [type="button"], [type="submit"], [type="reset"],
+a.button, label.button, .button,
+a[role="button"], label[role="button"], [role="button"] {
+  display: inline-block;
+  background: var(--button-back-color);
+  color: var(--button-fore-color);
+  border: 0.0714285714rem solid var(--button-border-color);
+  border-radius: var(--universal-border-radius);
+  padding: var(--universal-padding) calc(1.5 * var(--universal-padding));
+  margin: var(--universal-margin);
+  text-decoration: none;
+  cursor: pointer;
+  transition: background 0.3s; }
+  button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus,
+  a.button:hover,
+  a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus,
+  a[role="button"]:hover,
+  a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus {
+    background: var(--button-hover-back-color);
+    border-color: var(--button-hover-border-color); }
+
+input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] {
+  cursor: not-allowed;
+  opacity: 0.75; }
+
+.button-group {
+  display: flex;
+  border: 0.0714285714rem solid var(--button-group-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin); }
+  .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] {
+    margin: 0;
+    max-width: 100%;
+    flex: 1 1 auto;
+    text-align: center;
+    border: 0;
+    border-radius: 0;
+    box-shadow: none; }
+  .button-group > :not(:first-child) {
+    border-left: 0.0714285714rem solid var(--button-group-border-color); }
+  @media screen and (max-width: 499px) {
+    .button-group {
+      flex-direction: column; }
+      .button-group > :not(:first-child) {
+        border: 0;
+        border-top: 0.0714285714rem solid var(--button-group-border-color); } }
+
+/*
+  Custom elements for forms and input elements.
+*/
+button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary {
+  --button-back-color: #1976d2;
+  --button-fore-color: #f8f8f8; }
+  button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus {
+    --button-hover-back-color: #1565c0; }
+
+button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary {
+  --button-back-color: #d32f2f;
+  --button-fore-color: #f8f8f8; }
+  button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus {
+    --button-hover-back-color: #c62828; }
+
+button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary {
+  --button-back-color: #308732;
+  --button-fore-color: #f8f8f8; }
+  button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus {
+    --button-hover-back-color: #277529; }
+
+button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse {
+  --button-back-color: #212121;
+  --button-fore-color: #f8f8f8; }
+  button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus {
+    --button-hover-back-color: #111; }
+
+button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small {
+  padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding));
+  margin: var(--universal-margin); }
+
+button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large {
+  padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding));
+  margin: var(--universal-margin); }
+
+/*
+  Definitions for navigation elements.
+*/
+/* Navigation module CSS variable definitions */
+:root {
+  --header-back-color: #03234b;
+  --header-hover-back-color: #ffd200;
+  --header-fore-color: #ffffff;
+  --header-border-color: #3cb4e6;
+  --nav-back-color: #ffffff;
+  --nav-hover-back-color: #ffe97f;
+  --nav-fore-color: #e6007e;
+  --nav-border-color: #3cb4e6;
+  --nav-link-color: #3cb4e6;
+  --footer-fore-color: #ffffff;
+  --footer-back-color: #03234b;
+  --footer-border-color: #3cb4e6;
+  --footer-link-color: #3cb4e6;
+  --drawer-back-color: #ffffff;
+  --drawer-hover-back-color: #ffe97f;
+  --drawer-border-color: #3cb4e6;
+  --drawer-close-color: #e6007e; }
+
+header {
+  height: 2.75rem;
+  background: var(--header-back-color);
+  color: var(--header-fore-color);
+  border-bottom: 0.0714285714rem solid var(--header-border-color);
+  padding: calc(var(--universal-padding) / 4) 0;
+  white-space: nowrap;
+  overflow-x: auto;
+  overflow-y: hidden; }
+  header.row {
+    box-sizing: content-box; }
+  header .logo {
+    color: var(--header-fore-color);
+    font-size: 1.75rem;
+    padding: var(--universal-padding) calc(2 * var(--universal-padding));
+    text-decoration: none; }
+  header button, header [type="button"], header .button, header [role="button"] {
+    box-sizing: border-box;
+    position: relative;
+    top: calc(0rem - var(--universal-padding) / 4);
+    height: calc(3.1875rem + var(--universal-padding) / 2);
+    background: var(--header-back-color);
+    line-height: calc(3.1875rem - var(--universal-padding) * 1.5);
+    text-align: center;
+    color: var(--header-fore-color);
+    border: 0;
+    border-radius: 0;
+    margin: 0;
+    text-transform: uppercase; }
+    header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus {
+      background: var(--header-hover-back-color); }
+
+nav {
+  background: var(--nav-back-color);
+  color: var(--nav-fore-color);
+  border: 0.0714285714rem solid var(--nav-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin); }
+  nav * {
+    padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+  nav a, nav a:visited {
+    display: block;
+    color: var(--nav-link-color);
+    border-radius: var(--universal-border-radius);
+    transition: background 0.3s; }
+    nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus {
+      text-decoration: none;
+      background: var(--nav-hover-back-color); }
+  nav .sublink-1 {
+    position: relative;
+    margin-left: calc(2 * var(--universal-padding)); }
+    nav .sublink-1:before {
+      position: absolute;
+      left: calc(var(--universal-padding) - 1 * var(--universal-padding));
+      top: -0.0714285714rem;
+      content: '';
+      height: 100%;
+      border: 0.0714285714rem solid var(--nav-border-color);
+      border-left: 0; }
+  nav .sublink-2 {
+    position: relative;
+    margin-left: calc(4 * var(--universal-padding)); }
+    nav .sublink-2:before {
+      position: absolute;
+      left: calc(var(--universal-padding) - 3 * var(--universal-padding));
+      top: -0.0714285714rem;
+      content: '';
+      height: 100%;
+      border: 0.0714285714rem solid var(--nav-border-color);
+      border-left: 0; }
+
+footer {
+  background: var(--footer-back-color);
+  color: var(--footer-fore-color);
+  border-top: 0.0714285714rem solid var(--footer-border-color);
+  padding: calc(2 * var(--universal-padding)) var(--universal-padding);
+  font-size: 0.875rem; }
+  footer a, footer a:visited {
+    color: var(--footer-link-color); }
+
+header.sticky {
+  position: -webkit-sticky;
+  position: sticky;
+  z-index: 1101;
+  top: 0; }
+
+footer.sticky {
+  position: -webkit-sticky;
+  position: sticky;
+  z-index: 1101;
+  bottom: 0; }
+
+.drawer-toggle:before {
+  display: inline-block;
+  position: relative;
+  vertical-align: bottom;
+  content: '\00a0\2261\00a0';
+  font-family: sans-serif;
+  font-size: 1.5em; }
+@media screen and (min-width: 500px) {
+  .drawer-toggle:not(.persistent) {
+    display: none; } }
+
+[type="checkbox"].drawer {
+  height: 1px;
+  width: 1px;
+  margin: -1px;
+  overflow: hidden;
+  position: absolute;
+  clip: rect(0 0 0 0);
+  -webkit-clip-path: inset(100%);
+  clip-path: inset(100%); }
+  [type="checkbox"].drawer + * {
+    display: block;
+    box-sizing: border-box;
+    position: fixed;
+    top: 0;
+    width: 320px;
+    height: 100vh;
+    overflow-y: auto;
+    background: var(--drawer-back-color);
+    border: 0.0714285714rem solid var(--drawer-border-color);
+    border-radius: 0;
+    margin: 0;
+    z-index: 1110;
+    right: -320px;
+    transition: right 0.3s; }
+    [type="checkbox"].drawer + * .drawer-close {
+      position: absolute;
+      top: var(--universal-margin);
+      right: var(--universal-margin);
+      z-index: 1111;
+      width: 2rem;
+      height: 2rem;
+      border-radius: var(--universal-border-radius);
+      padding: var(--universal-padding);
+      margin: 0;
+      cursor: pointer;
+      transition: background 0.3s; }
+      [type="checkbox"].drawer + * .drawer-close:before {
+        display: block;
+        content: '\00D7';
+        color: var(--drawer-close-color);
+        position: relative;
+        font-family: sans-serif;
+        font-size: 2rem;
+        line-height: 1;
+        text-align: center; }
+      [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus {
+        background: var(--drawer-hover-back-color); }
+    @media screen and (max-width: 320px) {
+      [type="checkbox"].drawer + * {
+        width: 100%; } }
+  [type="checkbox"].drawer:checked + * {
+    right: 0; }
+  @media screen and (min-width: 500px) {
+    [type="checkbox"].drawer:not(.persistent) + * {
+      position: static;
+      height: 100%;
+      z-index: 1100; }
+      [type="checkbox"].drawer:not(.persistent) + * .drawer-close {
+        display: none; } }
+
+/*
+  Definitions for the responsive table component.
+*/
+/* Table module CSS variable definitions. */
+:root {
+  --table-border-color: #03234b;
+  --table-border-separator-color: #03234b;
+  --table-head-back-color: #03234b;
+  --table-head-fore-color: #ffffff;
+  --table-body-back-color: #ffffff;
+  --table-body-fore-color: #03234b;
+  --table-body-alt-back-color: #f4f4f4; }
+
+table {
+  border-collapse: separate;
+  border-spacing: 0;
+  margin: 0;
+  display: flex;
+  flex: 0 1 auto;
+  flex-flow: row wrap;
+  padding: var(--universal-padding);
+  padding-top: 0; }
+  table caption {
+    font-size: 1rem;
+    margin: calc(2 * var(--universal-margin)) 0;
+    max-width: 100%;
+    flex: 0 0 100%; }
+  table thead, table tbody {
+    display: flex;
+    flex-flow: row wrap;
+    border: 0.0714285714rem solid var(--table-border-color); }
+  table thead {
+    z-index: 999;
+    border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0;
+    border-bottom: 0.0714285714rem solid var(--table-border-separator-color); }
+  table tbody {
+    border-top: 0;
+    margin-top: calc(0 - var(--universal-margin));
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+  table tr {
+    display: flex;
+    padding: 0; }
+  table th, table td {
+    padding: calc(0.5 * var(--universal-padding));
+		font-size: 0.9rem; }
+  table th {
+    text-align: left;
+    background: var(--table-head-back-color);
+    color: var(--table-head-fore-color); }
+  table td {
+    background: var(--table-body-back-color);
+    color: var(--table-body-fore-color);
+    border-top: 0.0714285714rem solid var(--table-border-color); }
+
+table:not(.horizontal) {
+  overflow: auto;
+  max-height: 100%; }
+  table:not(.horizontal) thead, table:not(.horizontal) tbody {
+    max-width: 100%;
+    flex: 0 0 100%; }
+  table:not(.horizontal) tr {
+    flex-flow: row wrap;
+    flex: 0 0 100%; }
+  table:not(.horizontal) th, table:not(.horizontal) td {
+    flex: 1 0 0%;
+    overflow: hidden;
+    text-overflow: ellipsis; }
+  table:not(.horizontal) thead {
+    position: sticky;
+    top: 0; }
+  table:not(.horizontal) tbody tr:first-child td {
+    border-top: 0; }
+
+table.horizontal {
+  border: 0; }
+  table.horizontal thead, table.horizontal tbody {
+    border: 0;
+    flex: .2 0 0;
+    flex-flow: row nowrap; }
+  table.horizontal tbody {
+    overflow: auto;
+    justify-content: space-between;
+    flex: .8 0 0;
+    margin-left: 0;
+    padding-bottom: calc(var(--universal-padding) / 4); }
+  table.horizontal tr {
+    flex-direction: column;
+    flex: 1 0 auto; }
+  table.horizontal th, table.horizontal td {
+    width: auto;
+    border: 0;
+    border-bottom: 0.0714285714rem solid var(--table-border-color); }
+    table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) {
+      border-top: 0; }
+  table.horizontal th {
+    text-align: right;
+    border-left: 0.0714285714rem solid var(--table-border-color);
+    border-right: 0.0714285714rem solid var(--table-border-separator-color); }
+  table.horizontal thead tr:first-child {
+    padding-left: 0; }
+  table.horizontal th:first-child, table.horizontal td:first-child {
+    border-top: 0.0714285714rem solid var(--table-border-color); }
+  table.horizontal tbody tr:last-child td {
+    border-right: 0.0714285714rem solid var(--table-border-color); }
+    table.horizontal tbody tr:last-child td:first-child {
+      border-top-right-radius: 0.25rem; }
+    table.horizontal tbody tr:last-child td:last-child {
+      border-bottom-right-radius: 0.25rem; }
+  table.horizontal thead tr:first-child th:first-child {
+    border-top-left-radius: 0.25rem; }
+  table.horizontal thead tr:first-child th:last-child {
+    border-bottom-left-radius: 0.25rem; }
+
+@media screen and (max-width: 499px) {
+  table, table.horizontal {
+    border-collapse: collapse;
+    border: 0;
+    width: 100%;
+    display: table; }
+    table thead, table th, table.horizontal thead, table.horizontal th {
+      border: 0;
+      height: 1px;
+      width: 1px;
+      margin: -1px;
+      overflow: hidden;
+      padding: 0;
+      position: absolute;
+      clip: rect(0 0 0 0);
+      -webkit-clip-path: inset(100%);
+      clip-path: inset(100%); }
+    table tbody, table.horizontal tbody {
+      border: 0;
+      display: table-row-group; }
+    table tr, table.horizontal tr {
+      display: block;
+      border: 0.0714285714rem solid var(--table-border-color);
+      border-radius: var(--universal-border-radius);
+      background: #ffffff;
+      padding: var(--universal-padding);
+      margin: var(--universal-margin);
+      margin-bottom: calc(1 * var(--universal-margin)); }
+    table th, table td, table.horizontal th, table.horizontal td {
+      width: auto; }
+    table td, table.horizontal td {
+      display: block;
+      border: 0;
+      text-align: right; }
+    table td:before, table.horizontal td:before {
+      content: attr(data-label);
+      float: left;
+      font-weight: 600; }
+    table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child {
+      border-top: 0; }
+    table tbody tr:last-child td, table.horizontal tbody tr:last-child td {
+      border-right: 0; } }
+table tr:nth-of-type(2n) > td {
+  background: var(--table-body-alt-back-color); }
+
+@media screen and (max-width: 500px) {
+  table tr:nth-of-type(2n) {
+    background: var(--table-body-alt-back-color); } }
+:root {
+  --table-body-hover-back-color: #90caf9; }
+
+table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+  background: var(--table-body-hover-back-color); }
+
+@media screen and (max-width: 500px) {
+  table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+    background: var(--table-body-hover-back-color); } }
+/*
+  Definitions for contextual background elements, toasts and tooltips.
+*/
+/* Contextual module CSS variable definitions */
+:root {
+  --mark-back-color: #3cb4e6;
+  --mark-fore-color: #ffffff; }
+
+mark {
+  background: var(--mark-back-color);
+  color: var(--mark-fore-color);
+  font-size: 0.95em;
+  line-height: 1em;
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) var(--universal-padding); }
+  mark.inline-block {
+    display: inline-block;
+    font-size: 1em;
+    line-height: 1.4;
+    padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+:root {
+  --toast-back-color: #424242;
+  --toast-fore-color: #fafafa; }
+
+.toast {
+  position: fixed;
+  bottom: calc(var(--universal-margin) * 3);
+  left: 50%;
+  transform: translate(-50%, -50%);
+  z-index: 1111;
+  color: var(--toast-fore-color);
+  background: var(--toast-back-color);
+  border-radius: calc(var(--universal-border-radius) * 16);
+  padding: var(--universal-padding) calc(var(--universal-padding) * 3); }
+
+:root {
+  --tooltip-back-color: #212121;
+  --tooltip-fore-color: #fafafa; }
+
+.tooltip {
+  position: relative;
+  display: inline-block; }
+  .tooltip:before, .tooltip:after {
+    position: absolute;
+    opacity: 0;
+    clip: rect(0 0 0 0);
+    -webkit-clip-path: inset(100%);
+    clip-path: inset(100%);
+    transition: all 0.3s;
+    z-index: 1010;
+    left: 50%; }
+  .tooltip:not(.bottom):before, .tooltip:not(.bottom):after {
+    bottom: 75%; }
+  .tooltip.bottom:before, .tooltip.bottom:after {
+    top: 75%; }
+  .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after {
+    opacity: 1;
+    clip: auto;
+    -webkit-clip-path: inset(0%);
+    clip-path: inset(0%); }
+  .tooltip:before {
+    content: '';
+    background: transparent;
+    border: var(--universal-margin) solid transparent;
+    left: calc(50% - var(--universal-margin)); }
+  .tooltip:not(.bottom):before {
+    border-top-color: #212121; }
+  .tooltip.bottom:before {
+    border-bottom-color: #212121; }
+  .tooltip:after {
+    content: attr(aria-label);
+    color: var(--tooltip-fore-color);
+    background: var(--tooltip-back-color);
+    border-radius: var(--universal-border-radius);
+    padding: var(--universal-padding);
+    white-space: nowrap;
+    transform: translateX(-50%); }
+  .tooltip:not(.bottom):after {
+    margin-bottom: calc(2 * var(--universal-margin)); }
+  .tooltip.bottom:after {
+    margin-top: calc(2 * var(--universal-margin)); }
+
+:root {
+  --modal-overlay-color: rgba(0, 0, 0, 0.45);
+  --modal-close-color: #e6007e;
+  --modal-close-hover-color: #ffe97f; }
+
+[type="checkbox"].modal {
+  height: 1px;
+  width: 1px;
+  margin: -1px;
+  overflow: hidden;
+  position: absolute;
+  clip: rect(0 0 0 0);
+  -webkit-clip-path: inset(100%);
+  clip-path: inset(100%); }
+  [type="checkbox"].modal + div {
+    position: fixed;
+    top: 0;
+    left: 0;
+    display: none;
+    width: 100vw;
+    height: 100vh;
+    background: var(--modal-overlay-color); }
+    [type="checkbox"].modal + div .card {
+      margin: 0 auto;
+      max-height: 50vh;
+      overflow: auto; }
+      [type="checkbox"].modal + div .card .modal-close {
+        position: absolute;
+        top: 0;
+        right: 0;
+        width: 1.75rem;
+        height: 1.75rem;
+        border-radius: var(--universal-border-radius);
+        padding: var(--universal-padding);
+        margin: 0;
+        cursor: pointer;
+        transition: background 0.3s; }
+        [type="checkbox"].modal + div .card .modal-close:before {
+          display: block;
+          content: '\00D7';
+          color: var(--modal-close-color);
+          position: relative;
+          font-family: sans-serif;
+          font-size: 1.75rem;
+          line-height: 1;
+          text-align: center; }
+        [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus {
+          background: var(--modal-close-hover-color); }
+  [type="checkbox"].modal:checked + div {
+    display: flex;
+    flex: 0 1 auto;
+    z-index: 1200; }
+    [type="checkbox"].modal:checked + div .card .modal-close {
+      z-index: 1211; }
+
+:root {
+  --collapse-label-back-color: #03234b;
+  --collapse-label-fore-color: #ffffff;
+  --collapse-label-hover-back-color: #3cb4e6;
+  --collapse-selected-label-back-color: #3cb4e6;
+  --collapse-border-color: var(--collapse-label-back-color);
+  --collapse-selected-border-color: #ceecf8;
+  --collapse-content-back-color: #ffffff;
+  --collapse-selected-label-border-color: #3cb4e6; }
+
+.collapse {
+  width: calc(100% - 2 * var(--universal-margin));
+  opacity: 1;
+  display: flex;
+  flex-direction: column;
+  margin: var(--universal-margin);
+  border-radius: var(--universal-border-radius); }
+  .collapse > [type="radio"], .collapse > [type="checkbox"] {
+    height: 1px;
+    width: 1px;
+    margin: -1px;
+    overflow: hidden;
+    position: absolute;
+    clip: rect(0 0 0 0);
+    -webkit-clip-path: inset(100%);
+    clip-path: inset(100%); }
+  .collapse > label {
+    flex-grow: 1;
+    display: inline-block;
+    height: 1.25rem;
+    cursor: pointer;
+    transition: background 0.2s;
+    color: var(--collapse-label-fore-color);
+    background: var(--collapse-label-back-color);
+    border: 0.0714285714rem solid var(--collapse-selected-border-color);
+    padding: calc(1.25 * var(--universal-padding)); }
+    .collapse > label:hover, .collapse > label:focus {
+      background: var(--collapse-label-hover-back-color); }
+    .collapse > label + div {
+      flex-basis: auto;
+      height: 1px;
+      width: 1px;
+      margin: -1px;
+      overflow: hidden;
+      position: absolute;
+      clip: rect(0 0 0 0);
+      -webkit-clip-path: inset(100%);
+      clip-path: inset(100%);
+      transition: max-height 0.3s;
+      max-height: 1px; }
+  .collapse > :checked + label {
+    background: var(--collapse-selected-label-back-color);
+    border-color: var(--collapse-selected-label-border-color); }
+    .collapse > :checked + label + div {
+      box-sizing: border-box;
+      position: relative;
+      width: 100%;
+      height: auto;
+      overflow: auto;
+      margin: 0;
+      background: var(--collapse-content-back-color);
+      border: 0.0714285714rem solid var(--collapse-selected-border-color);
+      border-top: 0;
+      padding: var(--universal-padding);
+      clip: auto;
+      -webkit-clip-path: inset(0%);
+      clip-path: inset(0%);
+      max-height: 100%; }
+  .collapse > label:not(:first-of-type) {
+    border-top: 0; }
+  .collapse > label:first-of-type {
+    border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; }
+  .collapse > label:last-of-type:not(:first-of-type) {
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+  .collapse > label:last-of-type:first-of-type {
+    border-radius: var(--universal-border-radius); }
+  .collapse > :checked:last-of-type:not(:first-of-type) + label {
+    border-radius: 0; }
+  .collapse > :checked:last-of-type + label + div {
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+
+/*
+  Custom elements for contextual background elements, toasts and tooltips.
+*/
+mark.tertiary {
+  --mark-back-color: #3cb4e6; }
+
+mark.tag {
+  padding: calc(var(--universal-padding)/2) var(--universal-padding);
+  border-radius: 1em; }
+
+/*
+  Definitions for progress elements and spinners.
+*/
+/* Progress module CSS variable definitions */
+:root {
+  --progress-back-color: #3cb4e6;
+  --progress-fore-color: #555; }
+
+progress {
+  display: block;
+  vertical-align: baseline;
+  -webkit-appearance: none;
+  -moz-appearance: none;
+  appearance: none;
+  height: 0.75rem;
+  width: calc(100% - 2 * var(--universal-margin));
+  margin: var(--universal-margin);
+  border: 0;
+  border-radius: calc(2 * var(--universal-border-radius));
+  background: var(--progress-back-color);
+  color: var(--progress-fore-color); }
+  progress::-webkit-progress-value {
+    background: var(--progress-fore-color);
+    border-top-left-radius: calc(2 * var(--universal-border-radius));
+    border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+  progress::-webkit-progress-bar {
+    background: var(--progress-back-color); }
+  progress::-moz-progress-bar {
+    background: var(--progress-fore-color);
+    border-top-left-radius: calc(2 * var(--universal-border-radius));
+    border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+  progress[value="1000"]::-webkit-progress-value {
+    border-radius: calc(2 * var(--universal-border-radius)); }
+  progress[value="1000"]::-moz-progress-bar {
+    border-radius: calc(2 * var(--universal-border-radius)); }
+  progress.inline {
+    display: inline-block;
+    vertical-align: middle;
+    width: 60%; }
+
+:root {
+  --spinner-back-color: #ddd;
+  --spinner-fore-color: #555; }
+
+@keyframes spinner-donut-anim {
+  0% {
+    transform: rotate(0deg); }
+  100% {
+    transform: rotate(360deg); } }
+.spinner {
+  display: inline-block;
+  margin: var(--universal-margin);
+  border: 0.25rem solid var(--spinner-back-color);
+  border-left: 0.25rem solid var(--spinner-fore-color);
+  border-radius: 50%;
+  width: 1.25rem;
+  height: 1.25rem;
+  animation: spinner-donut-anim 1.2s linear infinite; }
+
+/*
+  Custom elements for progress bars and spinners.
+*/
+progress.primary {
+  --progress-fore-color: #1976d2; }
+
+progress.secondary {
+  --progress-fore-color: #d32f2f; }
+
+progress.tertiary {
+  --progress-fore-color: #308732; }
+
+.spinner.primary {
+  --spinner-fore-color: #1976d2; }
+
+.spinner.secondary {
+  --spinner-fore-color: #d32f2f; }
+
+.spinner.tertiary {
+  --spinner-fore-color: #308732; }
+
+/*
+  Definitions for icons - powered by Feather (https://feathericons.com/).
+*/
+span[class^='icon-'] {
+  display: inline-block;
+  height: 1em;
+  width: 1em;
+  vertical-align: -0.125em;
+  background-size: contain;
+  margin: 0 calc(var(--universal-margin) / 4); }
+  span[class^='icon-'].secondary {
+    -webkit-filter: invert(25%);
+    filter: invert(25%); }
+  span[class^='icon-'].inverse {
+    -webkit-filter: invert(100%);
+    filter: invert(100%); }
+
+span.icon-alert {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-bookmark {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-calendar {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-credit {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-edit {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); }
+span.icon-link {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-help {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-home {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-info {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-lock {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-mail {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-location {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-phone {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-rss {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-search {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-settings {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-share {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-cart {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-upload {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-user {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); }
+
+/*
+  Definitions for utilities and helper classes.
+*/
+/* Utility module CSS variable definitions */
+:root {
+  --generic-border-color: rgba(0, 0, 0, 0.3);
+  --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); }
+
+.hidden {
+  display: none !important; }
+
+.visually-hidden {
+  position: absolute !important;
+  width: 1px !important;
+  height: 1px !important;
+  margin: -1px !important;
+  border: 0 !important;
+  padding: 0 !important;
+  clip: rect(0 0 0 0) !important;
+  -webkit-clip-path: inset(100%) !important;
+  clip-path: inset(100%) !important;
+  overflow: hidden !important; }
+
+.bordered {
+  border: 0.0714285714rem solid var(--generic-border-color) !important; }
+
+.rounded {
+  border-radius: var(--universal-border-radius) !important; }
+
+.circular {
+  border-radius: 50% !important; }
+
+.shadowed {
+  box-shadow: var(--generic-box-shadow) !important; }
+
+.responsive-margin {
+  margin: calc(var(--universal-margin) / 4) !important; }
+  @media screen and (min-width: 500px) {
+    .responsive-margin {
+      margin: calc(var(--universal-margin) / 2) !important; } }
+  @media screen and (min-width: 1280px) {
+    .responsive-margin {
+      margin: var(--universal-margin) !important; } }
+
+.responsive-padding {
+  padding: calc(var(--universal-padding) / 4) !important; }
+  @media screen and (min-width: 500px) {
+    .responsive-padding {
+      padding: calc(var(--universal-padding) / 2) !important; } }
+  @media screen and (min-width: 1280px) {
+    .responsive-padding {
+      padding: var(--universal-padding) !important; } }
+
+@media screen and (max-width: 499px) {
+  .hidden-sm {
+    display: none !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+  .hidden-md {
+    display: none !important; } }
+@media screen and (min-width: 1280px) {
+  .hidden-lg {
+    display: none !important; } }
+@media screen and (max-width: 499px) {
+  .visually-hidden-sm {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+  .visually-hidden-md {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+@media screen and (min-width: 1280px) {
+  .visually-hidden-lg {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+
+/*# sourceMappingURL=mini-custom.css.map */
+
+img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; }
+img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;}
+
+.figure {
+  display: block;
+  margin-left: auto;
+  margin-right: auto;
+  text-align: center;
+}
\ No newline at end of file
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/st_logo.png b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/st_logo.png
new file mode 100644
index 0000000..8b80057
Binary files /dev/null and b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/st_logo.png differ
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/st_logo_2020.png b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/st_logo_2020.png
new file mode 100644
index 0000000..d6cebb5
Binary files /dev/null and b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/_htmresc/st_logo_2020.png differ
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/bsp_gui.c b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/bsp_gui.c
new file mode 100644
index 0000000..dcf535b
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/bsp_gui.c
@@ -0,0 +1,398 @@
+/**
+  ******************************************************************************
+  * @file    bsp_gui.c
+  * @author  MCD Application Team
+  * @brief   This file contains phy interface control functions.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(_GUI_INTERFACE)
+#include "bsp_gui.h"
+#include "usbpd_dpm_conf.h"
+#if GUI_FLASH_MAGIC_NUMBER
+#include "usbpd_trace.h"
+#include "tracer_emb.h"
+#endif /* GUI_FLASH_MAGIC_NUMBER */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private Defines */
+extern USBPD_SettingsTypeDef       DPM_Settings[USBPD_PORT_COUNT];
+extern uint8_t USBPD_NbPDO[4];
+#if defined(_VDM)
+extern USBPD_VDM_SettingsTypeDef   DPM_VDM_Settings[USBPD_PORT_COUNT];
+#endif /* _VDM */
+#if GUI_FLASH_MAGIC_NUMBER
+uint64_t MagicNumber = 0xDEADBABEDEADF00DU;
+#endif /* GUI_FLASH_MAGIC_NUMBER */
+/* Private Macro */
+#if GUI_FLASH_MAGIC_NUMBER
+#define GUI_CHECK_IF_MEMORY_IS_CORRUPTED(__ADDR__)
+#else
+#define GUI_CHECK_IF_MEMORY_IS_CORRUPTED(__ADDR__) if (0xFFFFFFFFu != *((uint32_t*)(__ADDR__)))
+#endif /* GUI_FLASH_MAGIC_NUMBER */
+
+/* Private function prototypes -----------------------------------------------*/
+static GUI_StatusTypeDef        LoadPDOFromFlash(uint32_t Address, uint32_t *pListOfPDO);
+static GUI_StatusTypeDef        LoadSettingsFromFlash(uint32_t Address, uint32_t *pSettings, uint32_t Size);
+static GUI_StatusTypeDef        SavePDOInFlash(uint32_t Address, uint32_t* pListOfPDO);
+static GUI_StatusTypeDef        SaveSettingsInFlash(uint32_t Address, uint32_t *pSettings, uint32_t Size);
+
+GUI_StatusTypeDef BSP_GUI_LoadDataFromFlash(void)
+{
+  GUI_StatusTypeDef _status = GUI_ERROR;
+#if GUI_FLASH_MAGIC_NUMBER
+  uint32_t _addr = GUI_FLASH_MAGIC_NUMBER;
+#else
+  uint32_t _addr = GUI_FLASH_ADDR_NB_PDO_SNK_P0;
+#endif /* GUI_FLASH_MAGIC_NUMBER */
+
+  /* Check that we did not reach the end of page */
+  if (GUI_FLASH_SIZE_RESERVED < 0)
+  {
+    goto _exit;
+  }
+
+#if GUI_FLASH_MAGIC_NUMBER
+  /* check that GUI area has not been corrupted */
+  if ((0xFFFFFFFFu != *((uint32_t*)_addr)) && (MagicNumber != *((uint64_t*)_addr)))
+  {
+    /* Memory has been corrupted */
+    USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t*)"GUI Memory is corrupted", sizeof("GUI Memory is corrupted"));
+    goto _exit;
+  }
+  if (0xFFFFFFFFu == *((uint32_t*)_addr))
+  {
+    /* Memory is empty no need to retrieve data from GUI area */
+    goto _exit;
+  }
+  _addr = GUI_FLASH_ADDR_NB_PDO_SNK_P0;
+#endif /* GUI_FLASH_MAGIC_NUMBER */
+
+  GUI_CHECK_IF_MEMORY_IS_CORRUPTED(_addr)
+  {
+    uint32_t* _ptr = (uint32_t*)USBPD_NbPDO;
+    USPBPD_WRITE32 (_ptr,*((uint32_t*)_addr));
+    _status = GUI_OK;
+  }
+
+#if defined(_SRC) || defined(_DRP)
+  /* Save PORT0_PDO_ListSRC */
+  _status |= LoadPDOFromFlash(GUI_FLASH_ADDR_PDO_SRC_P0, PORT0_PDO_ListSRC);
+#endif /* _SRC || _DRP */
+
+#if defined(_SNK) || defined(_DRP)
+  /* Save PORT0_PDO_ListSNK */
+  _status |= LoadPDOFromFlash(GUI_FLASH_ADDR_PDO_SNK_P0, PORT0_PDO_ListSNK);
+#endif /* _SNK || _DRP */
+
+#if USBPD_PORT_COUNT==2
+#if defined(_SRC) || defined(_DRP)
+  /* Save PORT1_PDO_ListSRC */
+  _status |= LoadPDOFromFlash(GUI_FLASH_ADDR_PDO_SRC_P1, PORT1_PDO_ListSRC);
+#endif /* _SRC || _DRP */
+
+#if defined(_SNK) || defined(_DRP)
+  /* Save PORT1_PDO_ListSNK */
+  _status |= LoadPDOFromFlash(GUI_FLASH_ADDR_PDO_SNK_P1, PORT1_PDO_ListSNK);
+#endif /* _SNK || _DRP */
+#endif /* USBPD_PORT_COUNT==2 */
+
+  /* Save DPM_Settings of port 0 */
+  _status |= LoadSettingsFromFlash(GUI_FLASH_ADDR_DPM_SETTINGS, (uint32_t*)DPM_Settings, sizeof(USBPD_SettingsTypeDef) * USBPD_PORT_COUNT);
+
+#if defined(GUI_FLASH_ADDR_DPM_ID_SETTINGS)
+  /* Save DPM_ID_Settings */
+  _status |= LoadSettingsFromFlash(GUI_FLASH_ADDR_DPM_ID_SETTINGS, (uint32_t*)DPM_ID_Settings, sizeof(USBPD_IdSettingsTypeDef) * USBPD_PORT_COUNT);
+#endif /* GUI_FLASH_ADDR_DPM_ID_SETTINGS */
+
+  /* Save DPM_Settings of port 0 */
+  _status |= LoadSettingsFromFlash(GUI_FLASH_ADDR_DPM_USER_SETTINGS, (uint32_t*)DPM_USER_Settings, sizeof(USBPD_USER_SettingsTypeDef) * USBPD_PORT_COUNT);
+#if defined(GUI_FLASH_ADDR_DPM_ID_SETTINGS)
+  /* Overwrite ID Settings in DPM_USER_Settings */
+#if defined(USBPD_REV30_SUPPORT)
+#if _SRC_CAPA_EXT && (defined(_SRC)||defined(_DRP))
+  DPM_USER_Settings[USBPD_PORT_0].DPM_SRCExtendedCapa.XID = DPM_ID_Settings[USBPD_PORT_0].XID;
+  DPM_USER_Settings[USBPD_PORT_0].DPM_SRCExtendedCapa.VID = DPM_ID_Settings[USBPD_PORT_0].VID;
+  DPM_USER_Settings[USBPD_PORT_0].DPM_SRCExtendedCapa.PID = DPM_ID_Settings[USBPD_PORT_0].PID;
+#if USBPD_PORT_COUNT==2
+  DPM_USER_Settings[USBPD_PORT_1].DPM_SRCExtendedCapa.XID = DPM_ID_Settings[USBPD_PORT_1].XID;
+  DPM_USER_Settings[USBPD_PORT_1].DPM_SRCExtendedCapa.VID = DPM_ID_Settings[USBPD_PORT_1].VID;
+  DPM_USER_Settings[USBPD_PORT_1].DPM_SRCExtendedCapa.PID = DPM_ID_Settings[USBPD_PORT_1].PID;
+#endif /* USBPD_PORT_COUNT==2 */
+#endif /* _SRC_CAPA_EXT && (_SRC || _DRP) */
+#if defined(_SNK)||defined(_DRP)
+  DPM_USER_Settings[USBPD_PORT_0].DPM_SNKExtendedCapa.XID = DPM_ID_Settings[USBPD_PORT_0].XID;
+  DPM_USER_Settings[USBPD_PORT_0].DPM_SNKExtendedCapa.VID = DPM_ID_Settings[USBPD_PORT_0].VID;
+  DPM_USER_Settings[USBPD_PORT_0].DPM_SNKExtendedCapa.PID = DPM_ID_Settings[USBPD_PORT_0].PID;
+#if USBPD_PORT_COUNT==2
+  DPM_USER_Settings[USBPD_PORT_1].DPM_SNKExtendedCapa.XID = DPM_ID_Settings[USBPD_PORT_1].XID;
+  DPM_USER_Settings[USBPD_PORT_1].DPM_SNKExtendedCapa.VID = DPM_ID_Settings[USBPD_PORT_1].VID;
+  DPM_USER_Settings[USBPD_PORT_1].DPM_SNKExtendedCapa.PID = DPM_ID_Settings[USBPD_PORT_1].PID;
+#endif /* USBPD_PORT_COUNT==2 */
+#endif /* _SNK || _DRP */
+#if _MANU_INFO
+  DPM_USER_Settings[USBPD_PORT_0].DPM_ManuInfoPort.VID = DPM_ID_Settings[USBPD_PORT_0].VID;
+  DPM_USER_Settings[USBPD_PORT_0].DPM_ManuInfoPort.PID = DPM_ID_Settings[USBPD_PORT_0].PID;
+#if USBPD_PORT_COUNT==2
+  DPM_USER_Settings[USBPD_PORT_1].DPM_ManuInfoPort.VID = DPM_ID_Settings[USBPD_PORT_1].VID;
+  DPM_USER_Settings[USBPD_PORT_1].DPM_ManuInfoPort.PID = DPM_ID_Settings[USBPD_PORT_1].PID;
+#endif /* USBPD_PORT_COUNT==2 */
+#endif /* _MANU_INFO */
+#endif /* USBPD_REV30_SUPPORT */
+#endif /* GUI_FLASH_ADDR_DPM_ID_SETTINGS */
+
+#if defined(_VDM)
+  /* Save DPM_Settings of port 0 */
+  _status |= LoadSettingsFromFlash(GUI_FLASH_ADDR_DPM_VDM_SETTINGS, (uint32_t*)DPM_VDM_Settings, sizeof(USBPD_VDM_SettingsTypeDef) * USBPD_PORT_COUNT);
+#if defined(GUI_FLASH_ADDR_DPM_ID_SETTINGS)
+  /* Overwrite ID Settings in VDM settings */
+  DPM_VDM_Settings[USBPD_PORT_0].VDM_XID_SOP      = DPM_ID_Settings[USBPD_PORT_0].XID;
+  DPM_VDM_Settings[USBPD_PORT_0].VDM_USB_VID_SOP  = DPM_ID_Settings[USBPD_PORT_0].VID;
+  DPM_VDM_Settings[USBPD_PORT_0].VDM_PID_SOP      = DPM_ID_Settings[USBPD_PORT_0].PID;
+#if USBPD_PORT_COUNT==2
+  DPM_VDM_Settings[USBPD_PORT_1].VDM_XID_SOP      = DPM_ID_Settings[USBPD_PORT_1].XID;
+  DPM_VDM_Settings[USBPD_PORT_1].VDM_USB_VID_SOP  = DPM_ID_Settings[USBPD_PORT_1].VID;
+  DPM_VDM_Settings[USBPD_PORT_1].VDM_PID_SOP      = DPM_ID_Settings[USBPD_PORT_1].PID;
+#endif /* USBPD_PORT_COUNT==2 */
+#endif /* _VDM */
+#endif /* GUI_FLASH_ADDR_DPM_ID_SETTINGS */
+
+_exit:
+  return _status;
+}
+
+GUI_StatusTypeDef BSP_GUI_SaveDataInFlash(void)
+{
+  GUI_StatusTypeDef status = GUI_ERROR;
+  FLASH_EraseInitTypeDef erase_init;
+  uint32_t page_error;
+
+  /* Disable interrupts */
+  __disable_irq();
+
+  /* Init Flash registers for writing */
+  HAL_FLASH_Unlock();
+
+  /* Erase the page associated to the GUI parameters */
+  erase_init.TypeErase  = FLASH_TYPEERASE_PAGES;
+#if defined(STM32F072xB)|| defined(STM32F051x8)
+  erase_init.PageAddress        = ADDR_FLASH_LAST_PAGE;
+#else
+  erase_init.Page       = INDEX_PAGE;
+#endif /* STM32F072xB || STM32F051x8 */
+#if defined (FLASH_OPTR_DBANK)
+  erase_init.Banks      = FLASH_BANK_2;
+#endif /* FLASH_OPTR_DBANK */
+  erase_init.NbPages    = 1;
+
+#if defined(FLASH_SR_OPTVERR)
+  /* Specific handling of STM32G0 and STM32G4 flash devices for allowing erase operations */
+  if(FLASH->SR != 0x00)
+  {
+    FLASH->SR = FLASH_SR_OPTVERR;
+  }
+#endif
+  status = (HAL_OK == HAL_FLASHEx_Erase(&erase_init, &page_error)) ? GUI_OK : GUI_ERASE_ERROR;
+
+  /* If Erase is OK, program the new data */
+  if ((0xFFFFFFFF == page_error) && (GUI_OK == status))
+  {
+#if GUI_FLASH_MAGIC_NUMBER
+    /* Save magic Number */
+    status = (HAL_OK == HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, GUI_FLASH_MAGIC_NUMBER, MagicNumber)) ? GUI_OK : GUI_WRITE_ERROR;
+#endif /* GUI_FLASH_MAGIC_NUMBER */
+
+#ifdef GUI_FLASH_ADDR_NB_PDO_SNK_P0
+    if (GUI_OK == status)
+    {
+      /* Save the nb of sink and src PDO */
+      uint64_t value = 0;
+      value |= USBPD_NbPDO[0];
+      value |= (USBPD_NbPDO[1] << 8);
+      value |= (USBPD_NbPDO[2] << 16);
+      value |= (USBPD_NbPDO[3] << 24);
+     status = (HAL_OK == HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, GUI_FLASH_ADDR_NB_PDO_SNK_P0, value)) ? GUI_OK : GUI_WRITE_ERROR;
+    }
+#endif  /* GUI_FLASH_ADDR_NB_PDO_SNK_P0 */
+
+#if defined(_SRC) || defined(_DRP)
+    /* Save PORT0_PDO_ListSRC */
+    if (GUI_OK == status)
+    {
+      status = SavePDOInFlash(GUI_FLASH_ADDR_PDO_SRC_P0, PORT0_PDO_ListSRC);
+    }
+#endif /* _SRC || _DRP */
+
+#if defined(_SNK) || defined(_DRP)
+    /* Save PORT0_PDO_ListSNK */
+    if (GUI_OK == status)
+    {
+      status = SavePDOInFlash(GUI_FLASH_ADDR_PDO_SNK_P0, PORT0_PDO_ListSNK);
+    }
+#endif /* _SNK || _DRP */
+
+#if USBPD_PORT_COUNT==2
+#if defined(_SRC) || defined(_DRP)
+        /* Save PORT1_PDO_ListSRC */
+        if (GUI_OK == status)
+        {
+          status = SavePDOInFlash(GUI_FLASH_ADDR_PDO_SRC_P1, PORT1_PDO_ListSRC);
+        }
+#endif /* _SRC || _DRP */
+
+#if defined(_SNK) || defined(_DRP)
+        /* Save PORT1_PDO_ListSNK */
+        if (GUI_OK == status)
+        {
+          status = SavePDOInFlash(GUI_FLASH_ADDR_PDO_SNK_P1, PORT1_PDO_ListSNK);
+        }
+#endif /* _SNK || _DRP */
+#endif /* USBPD_PORT_COUNT==2 */
+
+    /* Save DPM_Settings of port 0 */
+    if (GUI_OK == status)
+    {
+      status = SaveSettingsInFlash(GUI_FLASH_ADDR_DPM_SETTINGS, (uint32_t*)DPM_Settings, sizeof(USBPD_SettingsTypeDef) * USBPD_PORT_COUNT);
+    }
+
+#if defined(GUI_FLASH_ADDR_DPM_ID_SETTINGS)
+    /* Save DPM_ID_Settings */
+    if (GUI_OK == status)
+    {
+      status = SaveSettingsInFlash(GUI_FLASH_ADDR_DPM_ID_SETTINGS, (uint32_t*)DPM_ID_Settings, sizeof(USBPD_IdSettingsTypeDef));
+    }
+#endif /* GUI_FLASH_ADDR_DPM_ID_SETTINGS */
+
+    /* Save DPM_Settings of port 0 */
+    if (GUI_OK == status)
+    {
+      status = SaveSettingsInFlash(GUI_FLASH_ADDR_DPM_USER_SETTINGS, (uint32_t*)DPM_USER_Settings, sizeof(USBPD_USER_SettingsTypeDef) * USBPD_PORT_COUNT);
+    }
+
+#if defined(_VDM)
+    /* Save DPM_Settings of port 0 */
+    if (GUI_OK == status)
+    {
+      status = SaveSettingsInFlash(GUI_FLASH_ADDR_DPM_VDM_SETTINGS, (uint32_t*)DPM_VDM_Settings, sizeof(USBPD_VDM_SettingsTypeDef) * USBPD_PORT_COUNT);
+    }
+#endif /* _VDM */
+  }
+
+  /* Lock the flash after end of operations */
+  HAL_FLASH_Lock();
+
+  /* Enable interrupts */
+  __enable_irq();
+
+  return status;
+}
+
+static GUI_StatusTypeDef SavePDOInFlash(uint32_t Address, uint32_t *pListOfPDO)
+{
+  uint64_t data_in_64;
+  uint32_t index, index_flash;
+  uint32_t value[2];
+  GUI_StatusTypeDef status = GUI_OK;
+
+  for (index = 0, index_flash = 0; ((index < USBPD_MAX_NB_PDO) && (GUI_OK == status)); index++, index_flash++)
+  {
+    value[0] = pListOfPDO[index];
+    index++;
+    if (index < USBPD_MAX_NB_PDO)
+    {
+      value[1] = pListOfPDO[index];
+    }
+    else
+    {
+      value[1] = (0xFFFFFFFF);
+    }
+
+    data_in_64 = value[0] | (uint64_t)value[1] << 32;
+
+    /* Save in the FLASH */
+    status = HAL_OK == HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, (Address + (8 * index_flash)) , data_in_64) ? GUI_OK : GUI_WRITE_ERROR;
+  }
+  return status;
+}
+
+static GUI_StatusTypeDef SaveSettingsInFlash(uint32_t Address, uint32_t *pSettings, uint32_t Size)
+{
+  uint64_t data_in_64;
+  uint32_t index, index_flash;
+  uint32_t value[2];
+  GUI_StatusTypeDef status = GUI_OK;
+
+  uint32_t nb_double = ((Size * USBPD_PORT_COUNT) / 4);
+  uint8_t remaining = ((Size * USBPD_PORT_COUNT) % 4);
+
+  /* Save Settings in the FLASH */
+  for (index = 0, index_flash = 0; ((index < nb_double) && (GUI_OK == status)); index++, index_flash++)
+  {
+    value[0] = pSettings[index];
+    index++;
+    if (index < nb_double)
+    {
+      value[1] = pSettings[index];
+    }
+    else
+    {
+      if (0 == remaining)
+        value[1] = (0xFFFFFFFF);
+      else
+        while(1);
+    }
+
+    data_in_64 = value[0] | (uint64_t)value[1] << 32;
+
+    /* Save in the FLASH */
+    status = HAL_OK == HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, (Address + (8 * index_flash)) , data_in_64)? GUI_OK : GUI_WRITE_ERROR;
+  }
+  return status;
+}
+
+static GUI_StatusTypeDef LoadPDOFromFlash(uint32_t Address, uint32_t *pListOfPDO)
+{
+  uint32_t _addr = Address;
+  GUI_StatusTypeDef _status = GUI_ERROR;
+
+  /* Check if FLASH is not empty to retrieve the data. Nethertheless keep data in the RAM */
+  GUI_CHECK_IF_MEMORY_IS_CORRUPTED(_addr)
+  {
+    uint32_t _index;
+    for (_index = 0; _index < USBPD_MAX_NB_PDO; _index++)
+    {
+      pListOfPDO[_index] = *((uint32_t*)_addr);
+      _addr = _addr + 4u;
+    }
+    _status = GUI_OK;
+  }
+  return _status;
+}
+
+static GUI_StatusTypeDef LoadSettingsFromFlash(uint32_t Address, uint32_t *pSettings, uint32_t Size)
+{
+  uint32_t _addr = Address;
+  GUI_StatusTypeDef _status = GUI_ERROR;
+
+  /* Check if FLASH is not empty to retrieve the data. Nethertheless keep data in the RAM */
+  GUI_CHECK_IF_MEMORY_IS_CORRUPTED(_addr)
+  {
+    memcpy(pSettings, ((uint32_t*)_addr), Size);
+    _status = GUI_OK;
+  }
+  return _status;
+}
+#endif /* _GUI_INTERFACE */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/bsp_gui.h b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/bsp_gui.h
new file mode 100644
index 0000000..ea9efda
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/bsp_gui.h
@@ -0,0 +1,56 @@
+/**
+  ******************************************************************************
+  * @file    bsp_gui.h
+  * @author  MCD Application Team
+  * @brief   This file contains bsp interface control functions.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#ifndef BSP_GUI_H
+#define BSP_GUI_H
+/* Includes ------------------------------------------------------------------*/
+#include "usbpd_gui_memmap.h"
+#include "gui_api.h"
+#if defined(_VDM)
+#include "usbpd_vdm_user.h"
+#endif /* _VDM */
+#include "string.h"
+
+/* Private typedef -----------------------------------------------------------*/
+typedef enum {
+  GUI_OK,
+  GUI_ERASE_ERROR,
+  GUI_WRITE_ERROR,
+  GUI_ERROR
+} GUI_StatusTypeDef;
+
+/* Variable containing ADC conversions results */
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief  Load User settings from FLASH if GUI saving area is not empty (0xFFFFFFFF)
+  * @retval GUI status state (GUI_OK: USER Settings from GUI saving area else from original FW)
+  */
+GUI_StatusTypeDef     BSP_GUI_LoadDataFromFlash(void);
+
+/**
+  * @brief  Save User settings in GUI saving area
+  * @retval GUI status state
+  */
+GUI_StatusTypeDef     BSP_GUI_SaveDataInFlash(void);
+
+#endif /* BSP_GUI_H */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/data_struct_tlv.c b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/data_struct_tlv.c
new file mode 100644
index 0000000..7cd6abf
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/data_struct_tlv.c
@@ -0,0 +1,256 @@
+/**
+  ******************************************************************************
+  * @file    data_struct_tlv.c
+  * @author  MCD Application Team
+  * @brief   data_struct_tlv provides function to manipulate TLV structures
+  *          and/or strings.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#if defined(_GUI_INTERFACE)
+
+#include 
+#include 
+#include "data_struct_tlv.h"
+
+/**
+  * @brief    TLV_init_encode initializes a TLV_ToSend_Data structure, to have it ready to be used with TLV_add.
+  * @note     TLV_add and TLV_deinit_encode must not be called without calling this function first.
+  *           SOF and EOF are created too.
+  * @param    ToSendTLV    The TLV_ToSend_Data structure that will be used.
+  * @param    Tag          The Tag to put as the master Tag in this instruction.
+  * @param    SizeMax      The maximal size of the instruction. Will be used to protect writing against overflow.
+  * @param    Ptr          A pointer to the value. This function does not allocate memory, it is the user's responsibility to allocate this.
+  * @return   0 if everything went fine, 0xFF otherwise.
+  */
+uint8_t TLV_init_encode(TLV_ToSend_Data *ToSendTLV, uint8_t Tag, uint16_t SizeMax, uint8_t *Ptr)
+{
+  if(Ptr == NULL) return 0xFF;                  /* Buffer is NULL*/
+  if(SizeMax < 11) return 0xFF;                 /* Because of his small max size, the buffer can't even receive one empty TLV*/
+  
+  ToSendTLV->data = Ptr;
+  ToSendTLV->maxSize = SizeMax;
+   
+  ToSendTLV->data[0]
+    = ToSendTLV->data[1]
+      = ToSendTLV->data[2]
+        = ToSendTLV->data[3] = TLV_SOF;          /* SOF*/
+  
+  ToSendTLV->data[4] = Tag;                      /* Tag*/
+  
+  ToSendTLV->data[5]
+    = ToSendTLV->data[6] = 0;                    /* Size*/
+  
+  ToSendTLV->data[7]
+    = ToSendTLV->data[8]
+      = ToSendTLV->data[9]
+        = ToSendTLV->data[10] = TLV_EOF;         /* EOF*/
+  
+  ToSendTLV->EOFposition = 7;
+  
+  return 0;
+}
+
+/**
+  * @brief    TLV_add inserts data in the TLV format inside the value of a host TLV instruction.
+  * @note     Refer to the USB-PD GUI INTERFACE SPECIFICATION DOCUMENT for more info about this practice (part 5.3.1)
+  *           TLV_init_encode must be called with the same TLV_ToSend_Data structure before calling this function.
+  *           This function can add data to the same TLV_ToSend_Data structure indefinitely as long as the maximal size defined during initialization of the structure isn't reached.
+  *           SOF and EOF keeps being handled as data is added.
+  * @param    ToSendTLV    The TLV_ToSend_Data structure in which we add data.
+  * @param    Tag          The byte to put as Tag of the data we add
+  * @param    Size         The Size of the data, in bytes.
+  * @param    Value        A pointer to the Value to add.
+  * @return   The number of bytes written if everything went fine, 0xFFFF otherwise.
+  *
+  */
+uint16_t TLV_add(TLV_ToSend_Data *ToSendTLV, uint8_t Tag, uint16_t Size, const uint8_t *Value)
+{
+  if(ToSendTLV->data[ToSendTLV->EOFposition] != TLV_EOF)                return 0xFFFF;       /* EOF has been lost. Has any TLV operation failed, or went interrupted ?*/
+  if((ToSendTLV->EOFposition + 4 + 3 + Size) > ToSendTLV->maxSize)      return 0xFFFF;       /* Can't add this TLV, because it will overflow the provided buffer.*/
+  if(ToSendTLV->data == NULL)                                          return 0xFFFF;        /* Data points to NULL. Has the encoding been initialized with TLV_init_encode ?*/
+  if(ToSendTLV->EOFposition == 0xFFFF)                                 return 0xFFFF;        /* EOF at -1.  Has the decoding been initialized with TLV_init_decode ?*/
+  
+  ToSendTLV->data[ToSendTLV->EOFposition] = Tag;                           /* Tag*/
+  ToSendTLV->EOFposition++;
+  ToSendTLV->SizePosition = ToSendTLV->EOFposition;
+  
+  ToSendTLV->data[ToSendTLV->EOFposition]   = (Size >> 8) & 0x00FF;        /* Size*/
+  ToSendTLV->data[ToSendTLV->EOFposition+1] = (Size     ) & 0x00FF;
+  ToSendTLV->EOFposition += 2;
+  
+  for(uint32_t index = 0; index < Size; index++)                                          /* Value*/
+  {
+    ToSendTLV->data[ToSendTLV->EOFposition] = Value[index];
+    ToSendTLV->EOFposition++;
+  }
+  
+  ToSendTLV->data[ToSendTLV->EOFposition]
+    = ToSendTLV->data[ToSendTLV->EOFposition+1]
+      = ToSendTLV->data[ToSendTLV->EOFposition+2]
+        = ToSendTLV->data[ToSendTLV->EOFposition+3] = TLV_EOF;             /* EOF*/
+  
+  uint16_t total_lgth = (ToSendTLV->data[5] << 8) + ToSendTLV->data[6] + 3 + Size; /* Update of the top level Size marker*/
+  ToSendTLV->data[5] = total_lgth >> 8;
+  ToSendTLV->data[6] = total_lgth;
+  
+  return 3 + Size;
+}
+
+/**
+  * @brief    Inserts value inside the TLV packet
+  * @param    ToSendTLV    The TLV_ToSend_Data structure in which we add data.
+  * @param    Size         The Size of the data, in bytes.
+  * @param    Value        A pointer to the Value to add.
+  * @return   The number of bytes written if everything went fine, 0xFFFF otherwise.
+  *
+  */
+uint16_t TLV_addValue(TLV_ToSend_Data *ToSendTLV, const uint8_t *Value, uint16_t Size)
+{
+  if(ToSendTLV->data[ToSendTLV->EOFposition] != TLV_EOF)                return 0xFFFF;       /* EOF has been lost. Has any TLV operation failed, or went interrupted ?*/
+  if((ToSendTLV->EOFposition + 4 + 3 + Size) > ToSendTLV->maxSize)      return 0xFFFF;       /* Can't add this TLV, because it will overflow the provided buffer.*/
+  if(ToSendTLV->data == NULL)                                          return 0xFFFF;        /* Data points to NULL. Has the encoding been initialized with TLV_init_encode ?*/
+  if(ToSendTLV->EOFposition == 0xFFFF)                                 return 0xFFFF;        /* EOF at -1.  Has the decoding been initialized with TLV_init_decode ?*/
+  
+  for(uint32_t index = 0; index < Size; index++)                                          /* Value*/
+  {
+    ToSendTLV->data[ToSendTLV->EOFposition] = Value[index];
+    ToSendTLV->EOFposition++;
+  }
+  
+  ToSendTLV->data[ToSendTLV->EOFposition]
+    = ToSendTLV->data[ToSendTLV->EOFposition+1]
+      = ToSendTLV->data[ToSendTLV->EOFposition+2]
+        = ToSendTLV->data[ToSendTLV->EOFposition+3] = TLV_EOF;             /* EOF*/
+  
+  uint16_t total_lgth = (ToSendTLV->data[5] << 8) + ToSendTLV->data[6] + Size; /* Update of the top level Size marker*/
+  ToSendTLV->data[5] = total_lgth >> 8;
+  ToSendTLV->data[6] = total_lgth;
+  
+  return 3 + Size;
+}
+
+/**
+  * @brief    Update size of previous inserted TAG inside the TLV packet
+  * @param    ToSendTLV    The TLV_ToSend_Data structure in which we add data.
+  * @param    Size         The Size of the data, in bytes.
+  * @return   None
+  *
+  */
+void TLV_UpdateSizeTag(TLV_ToSend_Data *ToSendTLV, uint16_t Size)
+{
+  ToSendTLV->data[ToSendTLV->SizePosition]     = (Size >> 8) & 0x00FF;        /* Size*/
+  ToSendTLV->data[ToSendTLV->SizePosition + 1] = (Size     ) & 0x00FF;
+}
+/**
+  * @brief    TLV_deinit_encode deinitialize a TLV_ToSend_Data structure.
+  * @note     After this, TLV_add can no longer be used with this structure (unless if it is reinitialized with TLV_init_encode).
+  *           If a TLV_ToSend_Data structure is used without deinitialization, the associated string can be altered.
+  *           Once deinitialization is done, the string used can directly be send.
+  * @param    ToSendTLV    The TLV_ToSend_Data structure to deinitialize.
+  * @return   None
+  */
+void TLV_deinit_encode(TLV_ToSend_Data *ToSendTLV)
+{
+  ToSendTLV->data        = NULL;
+  ToSendTLV->EOFposition = 0xFFFF;
+  ToSendTLV->maxSize     = 0;
+}
+
+/**
+  * @brief    TLV_init_decode initializes a TLV_Received_Data structure, to have it ready to be used with TLV_get.
+  *           TLV_get and TLV_deinit_decode must not be called without calling this function first.
+  * @note     This function places a cursor on the first parameter.
+  * @param    ToProcessTLV    The TLV_Received_Data that will be used.
+  * @param    pReceivedString          The string which will be decoded.
+  * @return   The position of the cursor if everything went fine, 0xFF otherwise.
+  */
+uint8_t TLV_init_decode(TLV_Received_Data *ToProcessTLV, uint8_t *pReceivedString)
+{
+  if(pReceivedString == NULL) return 0xFF;               /* Received string is NULL*/
+  if(  (pReceivedString[0] != TLV_SOF)
+     ||(pReceivedString[1] != TLV_SOF)
+     ||(pReceivedString[2] != TLV_SOF)
+     ||(pReceivedString[3] != TLV_SOF)) return 0xFF;       /* Incorrect SOF*/
+  
+  ToProcessTLV->data = pReceivedString;
+  ToProcessTLV->cursor = 7; /* Cursor at start of value*/
+  
+  return ToProcessTLV->cursor;
+}
+
+/**
+  * @brief    TLV_get gets data in TLV format from inside the value of a host TLV instruction.
+  * @note     Refer to the USB-PD GUI INTERFACE SPECIFICATION DOCUMENT for more info about this practice (part 5.3.1)
+  *           TLV_init_decode must be called with the same TLV_Received_Data structure before calling this function.
+  *           Once this function has read its parameter, it places the cursor at the beginning of the next one. 
+  *           Refer to the returned value to see if there is one or not.
+  * @param    ToProcessTLV    The TLV_Received_Data structure which is associated to the string we want to get a parameter from.
+  * @param    Tag            A pointer to where the decoded Tag should be stocked.
+  * @param    Length            A pointer to where the decoded size should be stocked.
+  * @param    Value            A double pointer, which will contain a pointer directly to the data in the reception buffer.
+  * @return   0 if the reading was fine and there is another parameter after, 1 if the reading was fine and it was the last parameter, 0xFF otherwise.
+  */
+uint8_t TLV_get(TLV_Received_Data *ToProcessTLV, uint8_t *Tag, uint16_t *Length, uint8_t **Value)
+{
+  if(ToProcessTLV->data == NULL) return 0xFF;                           /* Data points to NULL. Has the decoding been initialized with TLV_init_decode ?*/
+  if(ToProcessTLV->cursor == 0)  return 0xFF;                           /* The cursor is not positioned. Has the decoding been initialized with TLV_init_decode ?*/
+  if(ToProcessTLV->data[ToProcessTLV->cursor] == TLV_EOF) return 0xFF;  /* EOF reached. There is not any parameter left to read.*/
+
+  *Tag = ToProcessTLV->data[ToProcessTLV->cursor];                                                         /* Tag*/
+  ToProcessTLV->cursor++;
+  *Length = (ToProcessTLV->data[ToProcessTLV->cursor] << 8) + ToProcessTLV->data[ToProcessTLV->cursor+1];  /* Length*/
+  ToProcessTLV->cursor += 2;
+  *Value = &ToProcessTLV->data[ToProcessTLV->cursor];                                                      /* Value*/
+  ToProcessTLV->cursor += *Length;
+
+  return 0;
+}
+
+/**
+  * @brief    TLV_deinit_decode deinitialize a TLV_Received_Data structure.
+  * @note     After this, TLV_get can no longer be used with this structure (unless if it is reinitialized with TLV_init_decode).
+  *           Once the cursor reach the EOF, there isn't anything to do except deinitializing the TLV_Received_Data structure with this function (eventually to reinitialize it after, to restart decoding from the beginning).
+  *           This function do not handle any deallocation.
+  * @param    ToProcessTLV    The TLV_Received_Data structure to deinitialize.
+  * @return   None
+  */
+void TLV_deinit_decode(TLV_Received_Data *ToProcessTLV)
+{
+  ToProcessTLV->data = NULL;
+  ToProcessTLV->cursor = 0;
+}
+
+/**
+  * @brief    TLV_getStringLength returns the length of a 8 bit TLV string, in bytes.
+  * @note     This function relies on the length marker in the string. Whether there is or not the SOF and/or the EOF, it will return the size of the string without them.
+  * @param    pString      A uint8_t pString, under TLV format, with or without SOF or EOF.
+  * @return   The size of the pString in bytes; including tag, length, and value; excluding SOF and EOF, if applicable.
+  */
+uint16_t TLV_get_string_length(const uint8_t* pString)
+{
+  uint16_t  length;      /* Variable to be return.*/
+  uint8_t   start = 0;    /* To indicate the start of the real pString, in case there is a EOF. */
+
+  while(pString[start] == TLV_SOF)
+  {
+    start++;
+  } /* start variable is now after the SOF if there is one.*/
+
+  length =   (uint16_t)pString[start+1] << 8
+    |(uint16_t)pString[start+2];
+  length += 3;
+  
+  return length;
+}
+#endif /* _GUI_INTERFACE */
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/data_struct_tlv.h b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/data_struct_tlv.h
new file mode 100644
index 0000000..77288dc
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/data_struct_tlv.h
@@ -0,0 +1,71 @@
+/**
+  ******************************************************************************
+  * @file    data_struct_tlv.h
+  * @author  MCD Application Team
+  * @brief   Include file used in TLV structures and/or strings handling.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#include 
+
+#ifndef DATA_STRUCT_TLV_H_
+#define DATA_STRUCT_TLV_H_
+
+#define TLV_SOF         0xFDu
+#define TLV_EOF         0xA5u
+#define TLV_SIZE_MAX    256u
+
+#define TLV_TAG_POSITION          4u /* Byte position of TAG                    */
+#define TLV_LENGTH_HIGH_POSITION  5u /* Byte position of LENGTH HIGH            */
+#define TLV_LENGTH_LOW_POSITION   6u /* Byte position of LENGTH LOW             */
+#define TLV_VALUE_POSITION        7u /* Byte position of VALUE                  */
+#define TLV_HEADER_SIZE           3u /* Size of TLV header (TAG(1) + LENGTH(2)  */
+#define TLV_SOF_SIZE              4u /* TLV_SOF * 4                             */
+#define TLV_EOF_SIZE              4u /* TLV_EOF * 4                             */
+
+/**
+ * @struct    TLV_ToSend_DATA
+ * @brief     Structure used when forming a TLV which is about to be send
+ */
+typedef struct
+{
+  uint8_t*  data;      /*!< The TLV instruction    */
+  uint16_t  maxSize;                /*!< Max size of the instruction        */
+  uint16_t  EOFposition;            /*!< Position of the EOF in data        */
+  uint16_t  SizePosition;            /*!< Position of the Size tag        */
+} TLV_ToSend_Data;
+
+/**
+ * @struct    TLV_Received_DATA
+ * @brief     Structure used when interpreting a received TLV
+ */
+typedef struct
+{
+  uint8_t*  data;      /*!< The TLV instruction    */
+  uint16_t        cursor;                 /*!< Read position                      */
+} TLV_Received_Data;
+
+
+uint16_t                TLV_get_string_length(const uint8_t* string);
+
+uint8_t                 TLV_init_encode(TLV_ToSend_Data *ToSendTLV, uint8_t tag, uint16_t sizeMax, uint8_t *ptr);
+uint16_t                TLV_add(TLV_ToSend_Data *ToSendTLV, uint8_t tag, uint16_t size, const uint8_t *value);
+uint16_t                TLV_addValue(TLV_ToSend_Data *ToSendTLV, const uint8_t *Value, uint16_t Size);
+void                    TLV_UpdateSizeTag(TLV_ToSend_Data *ToSendTLV, uint16_t Size);
+void                    TLV_deinit_encode(TLV_ToSend_Data *ToSendTLV);
+uint8_t                 TLV_init_decode(TLV_Received_Data *ToProcessTLV, uint8_t *receivedString);
+uint8_t                 TLV_get(TLV_Received_Data *ToProcessTLV, uint8_t *tag, uint16_t *length, uint8_t **value);
+void                    TLV_deinit_decode(TLV_Received_Data *ToProcessTLV);
+
+#endif /* DATA_STRUCT_TLV_H_ */
+
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/gui_api.c b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/gui_api.c
new file mode 100644
index 0000000..08fa374
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/gui_api.c
@@ -0,0 +1,3376 @@
+/**
+  ******************************************************************************
+  * @file    gui_api.c
+  * @author  MCD Application Team
+  * @brief   GUI_API provides functions associated with answers the MCU can send
+             to the computer via UART.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#if defined(_GUI_INTERFACE)
+
+#define GUI_API_C
+
+#include 
+#include "usbpd_core.h"
+#include "gui_api.h"
+#include "bsp_gui.h"
+#include "data_struct_tlv.h"
+#include "usbpd_dpm_core.h"
+#include "usbpd_trace.h"
+#include "usbpd_dpm_user.h"
+#include "usbpd_dpm_conf.h"
+#include "tracer_emb.h"
+#ifdef _VDM
+#include "usbpd_vdm_user.h"
+#endif /* _VDM */
+#include "usbpd_pdo_defs.h"
+#ifndef USBPD_TCPM_MODULE_ENABLED
+//#include "usbpd_hw_if.h"
+#else
+#include "usbpd_tcpci.h"
+#endif
+#if defined(_RTOS)
+#include "cmsis_os.h"
+#else
+#if defined(USE_STM32_UTILITY_OS)
+#include "utilities_conf.h"
+#endif /*USE_STM32_UTILITY_OS */
+#endif /*_RTOS*/
+#include "string.h"
+
+/* generic hal function valid for all stm32 */
+extern uint32_t HAL_GetTick(void);
+extern void HAL_NVIC_SystemReset(void);
+
+/** @addtogroup STM32_USBPD_LIBRARY
+  * @{
+  */
+
+/** @addtogroup USBPD_GUI_API
+  * @{
+  */
+
+/* Private enums -------------------------------------------------------------*/
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup USBPD_GUI_API_Private_Defines USBPD GUI API Private Defines
+  * @{
+  */
+
+#if !defined(USBPD_FW_VERSION)
+#define USBPD_FW_VERSION          0xFFFFFFFFU
+#endif /* !USBPD_FW_VERSION */
+
+#if !defined(USBPD_START_PORT_NUMBER)
+#define USBPD_START_PORT_NUMBER   0U
+#endif /* !USBPD_START_PORT_NUMBER */
+
+#define GUI_PORT_BIT_POSITION     5u /* Bit position of port number in TAG id */
+
+#define GUI_BOX_MESSAGES_MAX      30u
+
+#define GUI_TIMER_ENABLE_MSK      ((uint16_t)0x8000U)       /*!< Enable Timer Mask                                                        */
+#define GUI_TIMER_READ_MSK        ((uint16_t)0x7FFFU)       /*!< Read Timer Mask                                                          */
+
+#if defined(USBPDCORE_SNK_CAPA_EXT)
+#define GUI_VDM_CABLE_INFO      USBPD_CORE_SNK_EXTENDED_CAPA + 1U
+#else
+#define GUI_VDM_CABLE_INFO      USBPD_CORE_UNSTRUCTURED_VDM + 1U
+#endif /* USBPDCORE_SNK_CAPA_EXT */
+
+#if defined(_RTOS)
+#if (osCMSIS < 0x20000U)
+#define GUI_STACK_SIZE_ADDON_FOR_CMSIS              1
+#else
+#define GUI_STACK_SIZE_ADDON_FOR_CMSIS              5
+#endif /* osCMSIS < 0x20000U */
+#define FREERTOS_GUI_PRIORITY                   osPriorityLow
+#define FREERTOS_GUI_STACK_SIZE                 (240 * GUI_STACK_SIZE_ADDON_FOR_CMSIS)
+#endif /*_RTOS*/
+
+/**
+  * @brief  USB PD GUI REJECT REASON
+  */
+typedef enum
+{
+  GUI_REJ_DPM_REJECT                         = 0x00, /* 0)
+#define IS_GUI_TIMER_EXPIRED(_PORT_, _TIMER_)       (GUI_TIMER_ENABLE_MSK == _TIMER_[_PORT_])
+
+#if defined(_SNK) || defined(_DRP)
+#define GUI_UPDATE_VOLTAGE_MIN(_PDO_VOLT_, _SNK_VOLT_) \
+            if ((_PDO_VOLT_) < (_SNK_VOLT_)) \
+            { \
+              /* Update min voltage */ \
+              (_SNK_VOLT_) = (_PDO_VOLT_); \
+            }
+#define GUI_UPDATE_VOLTAGE_MAX(_PDO_VOLT_, _SNK_VOLT_) \
+            if ((_PDO_VOLT_) > (_SNK_VOLT_)) \
+            { \
+              /* Update min voltage */ \
+              (_SNK_VOLT_) = (_PDO_VOLT_); \
+            }
+#define GUI_UPDATE_CURRENT_MAX(_PDO_CURRENT_, _SNK_CURRENT_) \
+            if ((_PDO_CURRENT_) > (_SNK_CURRENT_)) \
+            { \
+              /* Update min current */ \
+              (_SNK_CURRENT_) = (_PDO_CURRENT_); \
+            }
+#define GUI_UPDATE_POWER_MAX(_PDO_POWER_, _SNK_POWER_) \
+            if ((_PDO_POWER_) > (_SNK_POWER_)) \
+            { \
+              /* Update min POWER */ \
+              (_SNK_POWER_) = (_PDO_POWER_); \
+            }
+#define GUI_CHECK_VOLTAGE_MIN(_PDO_VOLT_, _SNK_VOLT_) \
+            /* Update min voltage */ \
+            (_SNK_VOLT_) = (_PDO_VOLT_);
+#define GUI_CHECK_VOLTAGE_MAX(_PDO_VOLT_, _SNK_VOLT_) \
+            /* Update min voltage */ \
+            (_SNK_VOLT_) = (_PDO_VOLT_);
+#define GUI_CHECK_CURRENT_MAX(_PDO_CURRENT_, _SNK_CURRENT_) \
+            /* Update min current */ \
+            (_SNK_CURRENT_) = (_PDO_CURRENT_);
+#define GUI_CHECK_POWER_MAX(_PDO_POWER_, _SNK_POWER_) \
+            /* Update min POWER */ \
+            (_SNK_POWER_) = (_PDO_POWER_);
+
+#define GUI_DECODE_50MV(_Value_)           ((uint16_t)(((_Value_) * 50)))     /* From 50mV multiples to mV        */
+#define GUI_DECODE_100MV(_Value_)          ((uint16_t)(((_Value_) * 100)))    /* From 100mV multiples to mV       */
+#define GUI_DECODE_10MA(_Value_)           ((uint16_t)(((_Value_) * 10)))     /* From 10mA multiples to mA        */
+#define GUI_DECODE_50MA(_Value_)           ((uint16_t)(((_Value_) * 50)))     /* From 50mA multiples to mA        */
+#define GUI_DECODE_MW(_Value_)             ((uint16_t)(((_Value_) * 250)))    /* From 250mW multiples to mW       */
+#endif /* _SNK) || _DRP */
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup USBPD_GUI_API_Private_Variables USBPD GUI API Private Variables
+  * @{
+  */
+volatile uint16_t             GUI_TimerMeasReport[USBPD_PORT_COUNT];                       /*!< Timer used to send measurement report                                */
+
+extern USBPD_SettingsTypeDef              DPM_Settings[USBPD_PORT_COUNT];
+#ifdef _VDM
+extern USBPD_VDM_SettingsTypeDef          DPM_VDM_Settings[USBPD_PORT_COUNT];
+#endif /* _VDM */
+GUI_USER_ParamsTypeDef           GUI_USER_Params[USBPD_PORT_COUNT];
+
+uint8_t PtrDataRx[TLV_SIZE_MAX];
+uint8_t Processed[TLV_SIZE_MAX];
+
+USBPD_GUI_State GUI_State = GUI_STATE_INIT;
+/*!< Flag to indicate that user settings is from original FW (not saved into the FLASH) */
+uint8_t GUI_OriginalSettings;
+
+#if defined(_RTOS)
+osMessageQId  GUIMsgBox;
+#if (osCMSIS >= 0x20000U)
+osThreadAttr_t GUI_Thread_Atrr = {
+  .name       = "GUI",
+  .priority   = FREERTOS_GUI_PRIORITY, /*osPriorityLow,*/
+  .stack_size = FREERTOS_GUI_STACK_SIZE
+};
+#endif /* osCMSIS >= 0x20000U */
+#else
+volatile uint32_t GUI_Flag = GUI_USER_EVENT_NONE;
+#endif /* _RTOS */
+
+const uint8_t* (*pCB_HWBoardVersion)(void)  = NULL;
+const uint8_t* (*pCB_HWPDType)(void)        = NULL;
+uint16_t (*pCB_GetVoltage)(uint8_t)         = NULL;
+int16_t  (*pCB_GetCurrent)(uint8_t)         = NULL;
+USBPD_StatusTypeDef (*pCB_FreeText)(uint8_t, uint8_t*, uint16_t) = NULL;
+
+GUI_HandleTypeDef GUI_SaveInformation[USBPD_PORT_COUNT];
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup USBPD_GUI_API_Private_Functions GUI API Private Functions
+  * @{
+  */
+#ifdef _RTOS
+#if (osCMSIS < 0x20000U)
+static void      TaskGUI(void const *argument);
+#else
+static void      TaskGUI(void *argument);
+#endif /* osCMSIS < 0x20000U */
+static uint32_t  CheckGUITimers(void);
+#endif /* _RTOS */
+static void      GUI_CALLBACK_RX(uint8_t Character, uint8_t Error);
+static void      Send_DpmInitCnf(uint8_t PortNum, uint8_t *string);
+static void      Request_MessageReq(uint8_t PortNum, uint8_t* instruction, uint8_t *pEncodedMsg);
+static void      Send_DpmConfigSetCnf(uint8_t PortNum, uint8_t* instruction, uint8_t *pEncodedMsg);
+static void      Send_DpmConfigGetCnf(uint8_t PortNum, uint8_t* instruction, uint8_t *pEncodedMsg);
+static void      Send_DpmConfigGetRej(uint8_t PortNum, uint8_t *pEncodedMsg, USBPD_GUI_Reject_Reason RejecReason);
+static void      Send_DpmMessageRej(uint8_t PortNum, uint8_t *pEncodedMsg, USBPD_GUI_Reject_Reason RejecReason);
+static void      Send_DpmRegisterReadCnf(uint8_t PortNum, uint8_t *string, uint8_t param);
+static void      Send_DpmRegisterWriteCnf(uint8_t PortNum, uint8_t *string, uint8_t *toProcess);
+static USBPD_StatusTypeDef Manage_FreeText(uint8_t PortNum, uint8_t *pPayload, uint16_t Size);
+#if defined(_SNK) || defined(_DRP)
+static void      UpdateSNKPowerPort0(void);
+#if USBPD_PORT_COUNT==2
+static void      UpdateSNKPowerPort1(void);
+#endif /* USBPD_PORT_COUNT==2 */
+#endif /* _SNK) || _DRP */
+#if defined(USE_STM32_UTILITY_OS)
+void                  GUI_Execute(void);
+#endif /* USE_STM32_UTILITY_OS */
+
+/**
+  * @}
+  */
+
+/* Exported functions ------------------------------------------------------- */
+/** @addtogroup USBPD_GUI_API_Exported_Functions
+  * @{
+  */
+
+/**
+  * @brief  GUI initialization function
+  * @param  CB_HWBoardVersion BSP callback to retrieve HW Board version
+  * @param  CB_HWPDType       BSP callback to retrieve HW PD Type
+  * @param  CB_GetVoltage     BSP callback to retrieve VBUS voltage
+  * @param  CB_GetCurrent     BSP callback to retrieve IBUS current
+  * @retval Functional state
+  */
+USBPD_FunctionalState GUI_Init(const uint8_t* (*CB_HWBoardVersion)(void), const uint8_t* (*CB_HWPDType)(void), uint16_t (*CB_GetVoltage)(uint8_t), int16_t (*CB_GetCurrent)(uint8_t))
+{
+  USBPD_FunctionalState _status = USBPD_ENABLE;
+  /* Retrieve data from FLASH if needed */
+  GUI_OriginalSettings = ((GUI_OK == BSP_GUI_LoadDataFromFlash()) ? USBPD_FALSE : USBPD_TRUE);
+
+  /* Need to update CAD_tDRP & CAD_dcSRC_DRP if CAD_SNKToggleTime not initialized */
+  if ((0U == DPM_Settings[USBPD_PORT_0].CAD_SNKToggleTime) || (0U == DPM_Settings[USBPD_PORT_0].CAD_SRCToggleTime))
+  {
+    DPM_USER_Settings[USBPD_PORT_0].CAD_tDRP      = 80U;
+    DPM_USER_Settings[USBPD_PORT_0].CAD_dcSRC_DRP = 50U;
+  }
+  else
+  {
+    DPM_USER_Settings[USBPD_PORT_0].CAD_dcSRC_DRP = (DPM_Settings[USBPD_PORT_0].CAD_SRCToggleTime * 100) / (DPM_Settings[USBPD_PORT_0].CAD_SRCToggleTime + DPM_Settings[USBPD_PORT_0].CAD_SNKToggleTime);
+    DPM_USER_Settings[USBPD_PORT_0].CAD_tDRP = (DPM_Settings[USBPD_PORT_0].CAD_SRCToggleTime * 100) / DPM_USER_Settings[USBPD_PORT_0].CAD_dcSRC_DRP;
+  }
+#if USBPD_PORT_COUNT==2
+  if ((0U == DPM_Settings[USBPD_PORT_1].CAD_SNKToggleTime) || (0U == DPM_Settings[USBPD_PORT_1].CAD_SRCToggleTime))
+  {
+    DPM_USER_Settings[USBPD_PORT_1].CAD_tDRP      = 80U;
+    DPM_USER_Settings[USBPD_PORT_1].CAD_dcSRC_DRP = 50U;
+  }
+  else
+  {
+    DPM_USER_Settings[USBPD_PORT_1].CAD_dcSRC_DRP = (DPM_Settings[USBPD_PORT_1].CAD_SRCToggleTime * 100) / (DPM_Settings[USBPD_PORT_1].CAD_SRCToggleTime + DPM_Settings[USBPD_PORT_1].CAD_SNKToggleTime);
+    DPM_USER_Settings[USBPD_PORT_1].CAD_tDRP = (DPM_Settings[USBPD_PORT_1].CAD_SRCToggleTime * 100) / DPM_USER_Settings[USBPD_PORT_1].CAD_dcSRC_DRP;
+  }
+#endif /* USBPD_PORT_COUNT==2 */
+
+
+  pCB_HWBoardVersion  = CB_HWBoardVersion;
+  pCB_HWPDType        = CB_HWPDType;
+  pCB_GetVoltage      = CB_GetVoltage;
+  pCB_GetCurrent      = CB_GetCurrent;
+
+  /* Register 2 callbacks for notification in DPM */
+  USBPD_DPM_SetNotification_GUI(GUI_FormatAndSendNotification, GUI_PostNotificationMessage, GUI_SaveInfo);
+
+#if defined(_RTOS)
+#if (osCMSIS < 0x20000U)
+  osMessageQDef(MsgBox, GUI_BOX_MESSAGES_MAX, uint32_t);
+  osThreadDef(GUI, TaskGUI, FREERTOS_GUI_PRIORITY, 0, FREERTOS_GUI_STACK_SIZE);
+  GUIMsgBox = osMessageCreate(osMessageQ(MsgBox), NULL);
+  if(NULL == osThreadCreate(osThread(GUI), &GUIMsgBox))
+#else
+  GUIMsgBox = osMessageQueueNew (GUI_BOX_MESSAGES_MAX, sizeof(uint32_t), NULL);
+  if (NULL == osThreadNew(TaskGUI, &GUIMsgBox, &GUI_Thread_Atrr))
+#endif /* osCMSIS < 0x20000U */
+  {
+    _status = USBPD_DISABLE;
+  }
+  /* Enable IRQ which has been disabled by FreeRTOS services */
+  __enable_irq();
+#else /* RTOS */
+  GUI_Start();
+#if defined(USE_STM32_UTILITY_OS)
+  UTIL_SEQ_RegTask(TASK_GUI, 0, GUI_Execute);
+  UTIL_SEQ_SetTask(TASK_GUI, 0);
+#endif /*USE_STM32_UTILITY_OS */
+#endif /* _RTOS */
+
+  return _status;
+}
+
+void GUI_Start(void)
+{
+  /* register the GUI callback to manage UART reception */
+  TRACER_EMB_StartRX(GUI_CALLBACK_RX);
+}
+
+/**
+  * @brief  GUI Task
+  * @param  pEvent  GUI User event
+  * @retval None
+  */
+#ifdef _RTOS
+#if (osCMSIS < 0x20000U)
+static void TaskGUI(void const *pEvent)
+#else
+static void TaskGUI(void *pEvent)
+#endif /* osCMSIS < 0x20000U */
+#else
+void GUI_Execute(void)
+#endif /* _RTOS */
+{
+#ifdef _RTOS
+  uint32_t _timing = osWaitForever;
+  osMessageQId  queue = *(osMessageQId *)pEvent;
+
+  GUI_Start();
+  do
+  {
+#if (osCMSIS < 0x20000U)
+    osEvent event = osMessageGet(queue, _timing);
+    switch (((GUI_USER_EVENT)event.value.v & 0xF))
+#else
+    uint32_t event;
+    (void)osMessageQueueGet(queue, &event, NULL, _timing);
+    switch (((GUI_USER_EVENT)event & 0xF))
+#endif /* osCMSIS < 0x20000U */
+    {
+    case GUI_USER_EVENT_GUI:
+      {
+#if (osCMSIS < 0x20000U)
+        GUI_RXProcess((uint32_t)event.value.v);
+#else
+        GUI_RXProcess((uint32_t)event);
+#endif /* osCMSIS < 0x20000U */
+        /* Sent an event to check if measurement report has been requested */
+#if (osCMSIS < 0x20000U)
+        osMessagePut(GUIMsgBox, GUI_USER_EVENT_TIMER, 0);
+#else
+        uint32_t event = GUI_USER_EVENT_TIMER;
+        (void)osMessageQueuePut(GUIMsgBox, &event, 0U, 0U);
+#endif /* osCMSIS < 0x20000U */
+        break;
+      }
+    case GUI_USER_EVENT_TIMER:
+      {
+#endif /* _RTOS */
+#ifndef _RTOS
+      switch (GUI_Flag & 0xF)
+      {
+        case GUI_USER_EVENT_NONE:
+          break;
+        case GUI_USER_EVENT_GUI:
+          GUI_RXProcess(GUI_Flag);
+        case GUI_USER_EVENT_TIMER:
+            break;
+          default:
+            break;
+      }
+      GUI_Flag = GUI_USER_EVENT_NONE;
+#endif /* !_RTOS */
+      for(uint8_t _instance = 0; _instance < USBPD_PORT_COUNT; _instance++)
+      {
+        /* -------------------------------------------------  */
+        /* Check if timeout related to Measurement reporting  */
+        /* -------------------------------------------------  */
+        /* - Send a GUI Event only if PE is connected
+           and Measurement report has been enabled          */
+        if ((USBPD_TRUE == DPM_Params[_instance].PE_IsConnected)
+            && (1 == GUI_USER_Params[_instance].u.d.MeasReportActivation)
+              && (0 != GUI_USER_Params[_instance].u.d.MeasReportValue))
+        {
+          /* Check if timer has expired */
+          if (IS_GUI_TIMER_EXPIRED(_instance, GUI_TimerMeasReport))
+          {
+            uint32_t event_mr = GUI_USER_EVENT_GUI | (_instance << GUI_PE_PORT_NUM_Pos) | (GUI_NOTIF_MEASUREMENT << GUI_PE_NOTIF_Pos);
+            GUI_RXProcess(event_mr);
+          }
+          /* Start or Restart Measurement report timer */
+          if (!(IS_GUI_TIMER_RUNNING(_instance, GUI_TimerMeasReport)))
+          {
+            GUI_START_TIMER(_instance, GUI_TimerMeasReport, (GUI_USER_Params[_instance].u.d.MeasReportValue * GUI_NOTIF_MEASUREMENT_STEP));
+          }
+        }
+        else
+        {
+          /* Stop measurement report timer */
+          GUI_TimerMeasReport[_instance] = 0;
+        }
+      }
+#ifdef _RTOS
+      break;
+    }
+
+    default:
+      break;
+    }
+    _timing = CheckGUITimers();
+  }
+  while(1);
+#endif /* !_RTOS */
+}
+
+#ifdef _RTOS
+static uint32_t CheckGUITimers(void)
+{
+  uint32_t _timing = osWaitForever;
+  uint32_t _current_timing;
+
+  /* Calculate the minimum timers to wake-up GUI task */
+  for(uint8_t instance = 0; instance < USBPD_PORT_COUNT; instance++)
+  {
+    /* Check if Measurement reporting has been enabled by the GUI */
+    _current_timing = GUI_TimerMeasReport[instance] & GUI_TIMER_READ_MSK;
+    if(_current_timing > 0)
+    {
+      if (_current_timing < _timing)
+      {
+        _timing = _current_timing;
+      }
+    }
+  }
+  return _timing;
+}
+#endif /* !_RTOS */
+
+void GUI_TimerCounter(void)
+{
+  /* Increment GUI timer only if Measurement report has been activated */
+  if (1 == GUI_USER_Params[USBPD_PORT_0].u.d.MeasReportActivation)
+  {
+    if((GUI_TimerMeasReport[USBPD_PORT_0] & GUI_TIMER_READ_MSK) > 0)
+    {
+      GUI_TimerMeasReport[USBPD_PORT_0]--;
+    }
+#if !defined(_RTOS)&&defined(USE_STM32_UTILITY_OS)
+    else
+    {
+      UTIL_SEQ_SetTask(TASK_GUI, 0);
+    }
+#endif /* !_RTOS && USE_STM32_UTILITY_OS */
+  }
+#if USBPD_PORT_COUNT==2
+  if (1 == GUI_USER_Params[USBPD_PORT_1].u.d.MeasReportActivation)
+  {
+    if((GUI_TimerMeasReport[USBPD_PORT_1] & GUI_TIMER_READ_MSK) > 0)
+    {
+      GUI_TimerMeasReport[USBPD_PORT_1]--;
+    }
+#if !defined(_RTOS)&&defined(USE_STM32_UTILITY_OS)
+    else
+    {
+      UTIL_SEQ_SetTask(TASK_GUI, 0);
+    }
+#endif /* !_RTOS && USE_STM32_UTILITY_OS */
+  }
+#endif /* USBPD_PORT_COUNT == 2 */
+}
+
+/**
+  * @brief  callback called to end a transfer.
+  * @param  Character Byte received by the device
+  * @param  Error     Error detected in the reception
+  * @retval 1 if message to send to DPM application
+  */
+void GUI_CALLBACK_RX(uint8_t Character, uint8_t Error)
+{
+  uint32_t event;
+  __disable_irq();
+  event = GUI_GetMessage(Character, Error);
+  __enable_irq();
+  if (event == 1)
+  {
+#if defined(_RTOS)
+#if (osCMSIS < 0x20000U)
+    (void)osMessagePut(GUIMsgBox, GUI_USER_EVENT_GUI, 1);
+#else
+    uint32_t event = GUI_USER_EVENT_GUI;
+    (void)osMessageQueuePut(GUIMsgBox, &event, 0U, 0U);
+#endif /* osCMSIS < 0x20000U */
+#else
+    GUI_Flag = GUI_USER_EVENT_GUI;
+#if defined(USE_STM32_UTILITY_OS)
+    GUI_RXProcess(GUI_Flag);
+    GUI_Flag = GUI_USER_EVENT_NONE;
+#endif /* USE_STM32_UTILITY_OS */
+#endif /* _RTOS */
+  }
+}
+
+/**
+  * @brief  Main Trace RX process to push data on the media.
+  * @param  Event     GUI trace event
+  * @retval Timing
+  */
+uint32_t GUI_RXProcess(uint32_t Event)
+{
+  uint8_t *msg;
+  USBPD_GUI_State state;
+  uint8_t size;
+
+  if (0 == (Event & GUI_PE_NOTIF_Msk))
+  {
+    /* Message have been received by GUI */
+    state = GUI_SendAnswer(&msg, &size);
+
+    switch (state)
+    {
+    case GUI_STATE_RESET:
+      /* DPM_RESET_REQ received by the device */
+      /* Save parameters in FLASH */
+      BSP_GUI_SaveDataInFlash();
+      HAL_NVIC_SystemReset();
+      break;
+    case GUI_STATE_INIT:
+      /* DPM_INIT_REQ received by the device */
+      break;
+    default:
+      /* Another GUI messages received by the device */
+      TRACER_EMB_Add(msg, size);
+      break;
+    }
+  }
+  else
+  {
+    uint16_t type_event = (Event & GUI_PE_NOTIF_Msk) >> GUI_PE_NOTIF_Pos;
+    if (GUI_NOTIF_MEASUREMENT == type_event)
+    {
+      /* Notification related to timeout for measure reporting */
+      /* Send a notification to associated port */
+      GUI_FormatAndSendNotification(((Event & GUI_PE_PORT_NUM_Msk) >> GUI_PE_PORT_NUM_Pos), GUI_NOTIF_MEASUREREPORTING, HAL_GetTick());
+    }
+    else
+    {
+      /* Message have been received by PE */
+      /* Send a notification to associated port */
+      GUI_FormatAndSendNotification(((Event & GUI_PE_PORT_NUM_Msk) >> GUI_PE_PORT_NUM_Pos), GUI_NOTIF_PE_EVENT, type_event);
+    }
+  }
+  return 0;
+}
+
+/**
+  * @brief  TRACE function to send a notification
+  * @param  PortNum           Index of current used port
+  * @param  TypeNotification  Type of requested notification is a combination of @ref USBPD_TRACE_TRACE_TYPE_NOTIFICATION
+  * @param  Value             Value depending of TypeNotification
+  * @note   If TypeNotification == GUI_NOTIF_ISCONNECTED, Value should be equal to 0 (Not connected) or 1 (connected)
+  * @retval USBPD Status
+  */
+uint32_t GUI_FormatAndSendNotification(uint32_t PortNum, uint32_t TypeNotification, uint32_t Value)
+{
+  uint8_t *msg;
+  uint8_t size;
+  /* Only send notification if GUI is connected */
+  if (GUI_STATE_INIT != GUI_SendNotification(PortNum, &msg, &size, TypeNotification, Value))
+  {
+    TRACER_EMB_Add(msg, size);
+  }
+  return 0;
+}
+
+
+/**
+  * @brief  Function called through UART IT RX to fill the GUI RX buffer
+  * @param  Character Received byte
+  * @param  Error     Error if issue during reception
+  * @retval 1 indicates that a complete GUI message have been received
+  */
+uint32_t GUI_GetMessage(uint8_t Character, uint8_t Error)
+{
+  uint32_t status = 0;
+  static uint16_t counter = 0;    /* Allows for example to count the number of SOF or EOF we received consecutively */
+  static uint16_t cursor = 0;     /* Our position in the buffer */
+  static uint16_t currentSize;    /* How many bytes we should expect */
+  static enum receptionStateMachine
+  {
+    Rstart,
+    RonGoing,
+    Rsize,
+    Rend,
+    Rerror
+  } Rstate = Rstart;
+
+  if(cursor < TLV_SIZE_MAX)
+  {
+    PtrDataRx[cursor] = Character;
+  }
+  else /* buffer too small, overflow */
+  {
+    cursor = 0;
+    counter = 0;
+    Rstate = Rstart;
+    return 0;
+  }
+
+  if(Error) Rstate = Rerror;
+
+  switch(Rstate)
+  {
+  case Rstart :
+    if(PtrDataRx[cursor] == TLV_SOF)
+    {
+      counter++;
+    }
+    else
+    {
+      counter = 0;
+      cursor = 0xFFFF; /* cursor is unsigned, but it will inevitably increments at the end of function, and we need a 0 at the next pass here */
+    }
+
+    if(counter == 4) /* The whole SOF is received */
+    {
+      counter = 0;
+      Rstate = Rsize;
+    }
+    break;
+  case Rsize :
+    counter++;
+
+    if(counter == 3) /* We have received the size */
+    {
+      currentSize = (PtrDataRx[cursor-1] << 8) + PtrDataRx[cursor];
+      if (0 == currentSize)
+      {
+        Rstate = Rend;
+      }
+      else
+      {
+        Rstate = RonGoing;
+      }
+      counter = 0;
+    }
+    break;
+  case RonGoing :
+    counter++;
+
+    if(counter == currentSize)
+    {
+      /* When there is no value, the first EOF is handled by Rongoing, before Rend takes control */
+      counter = 0;
+      Rstate = Rend;
+    }
+    break;
+  case Rend :
+    counter++;
+    if(PtrDataRx[cursor] == TLV_EOF
+       && PtrDataRx[cursor-1] == TLV_EOF
+         && PtrDataRx[cursor-2] == TLV_EOF
+           && PtrDataRx[cursor-3] == TLV_EOF)
+    {
+      /* The semaphore must be given only in this case, because otherwise it means we didn't receive the correct size of bytes */
+      if(counter == 4)
+      {
+        status = 1;
+      }
+      counter = 0;
+      cursor = 0xFFFF;
+      Rstate = Rstart;
+    }
+
+    if(cursor == currentSize + 11)
+    {
+      /* No complete EOF arrived. We reset the buffer for safety even if the instruction might be complete. */
+      counter = 0;
+      cursor = 0xFFFF;
+      Rstate = Rstart;
+    }
+    break;
+  case Rerror :
+    counter = 0;
+    cursor = 0xFFFF;
+    Rstate = Rstart;
+    break;
+  }
+
+  cursor++;
+  return status;
+}
+
+/**
+  * @brief  Answer to a message received by the GUI
+  * @param  pMsgToSend Pointer on the message to send
+  * @param  pSizeMsg   Pointer on the size of the message to send
+  * @retval GUI state
+  */
+USBPD_GUI_State GUI_SendAnswer(uint8_t **pMsgToSend, uint8_t *pSizeMsg)
+{
+  /* Extract the port from the tag*/
+  uint8_t port = PtrDataRx[TLV_TAG_POSITION] >> GUI_PORT_BIT_POSITION;
+
+  /* Do the appropriate treatment in response to what we have received */
+  switch(PtrDataRx[TLV_TAG_POSITION] & 0x1F)
+  {
+  case DPM_RESET_REQ:
+    /* Reset*/
+    return GUI_STATE_RESET;
+
+  case DPM_INIT_REQ:
+    {
+      Send_DpmInitCnf(port, Processed);
+      *pMsgToSend = Processed;
+      *pSizeMsg = TLV_get_string_length(Processed) + 8;
+      TRACER_EMB_Add(*pMsgToSend, *pSizeMsg);
+      GUI_State = GUI_STATE_RUNNING;
+      if (0 == port)
+      {
+        /* Send a notification all the port */
+        GUI_FormatAndSendNotification(USBPD_PORT_0, GUI_NOTIF_ISCONNECTED | GUI_NOTIF_PE_EVENT | GUI_NOTIF_TIMESTAMP, USBPD_NOTIFY_ALL);
+#if USBPD_PORT_COUNT==2
+        GUI_FormatAndSendNotification(USBPD_PORT_1, GUI_NOTIF_ISCONNECTED | GUI_NOTIF_PE_EVENT | GUI_NOTIF_TIMESTAMP, USBPD_NOTIFY_ALL);
+#endif /* USBPD_PORT_COUNT == 2 */
+      }
+      return GUI_STATE_INIT;
+    }
+
+  case DPM_CONFIG_GET_REQ:
+    if (0 != port)
+    {
+      Send_DpmConfigGetCnf((port - 1), PtrDataRx, Processed);
+    }
+    else
+    {
+      Send_DpmConfigGetRej(port, Processed, GUI_REJ_DPM_INVALID_PORT_NUMBER);
+    }
+    break;
+  case DPM_CONFIG_SET_REQ:
+    if (0 != port)
+    {
+      Send_DpmConfigSetCnf((port - 1), PtrDataRx, Processed);
+    }
+    else
+    {
+      Send_DpmConfigGetRej(port, Processed, GUI_REJ_DPM_INVALID_PORT_NUMBER);
+    }
+    break;
+  case DPM_MESSAGE_REQ:
+    if (0 != port)
+    {
+      Request_MessageReq((port - 1), PtrDataRx, Processed);
+    }
+    else
+    {
+      Send_DpmMessageRej(port, Processed, GUI_REJ_DPM_INVALID_PORT_NUMBER);
+    }
+    break;
+  case DPM_REGISTER_READ_REQ:
+    if (0 != port)
+    {
+      /* If size is 0*/
+      if(!PtrDataRx[TLV_LENGTH_HIGH_POSITION] && !PtrDataRx[TLV_LENGTH_LOW_POSITION])
+      {
+        Send_DpmRegisterReadCnf((port - 1), Processed, 0xFF);
+      }
+      else
+      {
+        /* PtrDataRx[TLV_VALUE_POSITION] is the tag in parameter,
+           when only one parameter is needed (cf USBPD GUI specification)*/
+        Send_DpmRegisterReadCnf((port - 1), Processed, PtrDataRx[TLV_VALUE_POSITION]);
+      }
+    }
+    else
+    {
+      Send_DpmConfigGetRej(port, Processed, GUI_REJ_DPM_INVALID_PORT_NUMBER);
+    }
+    break;
+  case DPM_REGISTER_WRITE_REQ:
+    if (0 != port)
+    {
+      Send_DpmRegisterWriteCnf((port - 1), Processed, PtrDataRx);
+    }
+    else
+    {
+      Send_DpmConfigGetRej(port, Processed, GUI_REJ_DPM_INVALID_PORT_NUMBER);
+    }
+    break;
+  default :
+    break;
+  }
+
+  *pMsgToSend = Processed;
+  *pSizeMsg = TLV_get_string_length(Processed) + 8;
+  return GUI_State;
+}
+
+/**
+  * @brief  Answer to a message received by the GUI
+  * @param  PortNum           Port number
+  * @param  pMsgToSend        Pointer on the message to send
+  * @param  pSizeMsg          Pointer on the size of the message to send
+  * @param  TypeNotification  Type of the notification
+  * @param  Value             Value of the notification
+  * @retval GUI state
+  */
+USBPD_GUI_State GUI_SendNotification(uint8_t PortNum, uint8_t **pMsgToSend, uint8_t *pSizeMsg, uint32_t TypeNotification, uint32_t Value)
+{
+  TLV_ToSend_Data send_tlv;
+  USBPD_GUI_State gui_state = GUI_STATE_INIT;
+
+  /* Send a notitification only if GUI is running */
+  if (GUI_State == GUI_STATE_RUNNING)
+  {
+    TLV_init_encode(&send_tlv, __GUI_SET_TAG_ID((PortNum + 1), DPM_MESSAGE_IND), TLV_SIZE_MAX, Processed);
+
+    /* Check PD connection */
+    if ((TypeNotification & GUI_NOTIF_ISCONNECTED) == GUI_NOTIF_ISCONNECTED)
+    {
+      /* Is Connected*/
+      TLV_add(&send_tlv, GUI_IND_ISCONNECTED, 1, (uint8_t[]){DPM_Params[PortNum].PE_Power});
+      if (USBPD_TRUE == DPM_Params[PortNum].PE_IsConnected)
+      {
+        uint8_t rp_value = 0;
+        /* CC line */
+        TLV_add(&send_tlv, GUI_IND_CC, 1, (uint8_t[]){DPM_Params[PortNum].ActiveCCIs});
+        /* Power Role*/
+        TLV_add(&send_tlv, GUI_IND_POWERROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_PowerRole});
+        /* CC Default Current Advertised */
+        rp_value = 3; /* (uint8_t)CAD_GetRPValue(PortNum); */
+        TLV_add(&send_tlv, GUI_IND_CCDEFAULTCURRENTADVERTISED, 1, &rp_value);
+        if (USBPD_POWER_EXPLICITCONTRACT == DPM_Params[PortNum].PE_Power)
+        {
+          /* Data Role*/
+          TLV_add(&send_tlv, GUI_IND_DATAROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_DataRole});
+          /* Vconn ON*/
+          TLV_add(&send_tlv, GUI_IND_VCONNON, 1, (uint8_t[]){DPM_Params[PortNum].VconnStatus});
+          /* PD_Spec Revision */
+          TLV_add(&send_tlv, GUI_IND_PD_SPECREVISION, 1, (uint8_t[]){DPM_Params[PortNum].PE_SpecRevision});
+        }
+      }
+    }
+
+    /* Check PD message event */
+    if ((TypeNotification & GUI_NOTIF_PE_EVENT) == GUI_NOTIF_PE_EVENT)
+    {
+      if (USBPD_NOTIFY_ALL != Value)
+      {
+        /* PD_MessageNotif */
+        TLV_add(&send_tlv, GUI_IND_PD_MESSAGENOTIF, 1, (uint8_t*)&Value);
+
+        switch (Value)
+        {
+          case USBPD_NOTIFY_POWER_STATE_CHANGE :
+            /* Is Connected*/
+            TLV_add(&send_tlv, GUI_IND_ISCONNECTED, 1, (uint8_t[]){DPM_Params[PortNum].PE_Power});
+            if (USBPD_POWER_NO == DPM_Params[PortNum].PE_Power)
+            {
+              /* CC line */
+              TLV_add(&send_tlv, GUI_IND_CC, 1, (uint8_t[]){DPM_Params[PortNum].ActiveCCIs});
+              /* PowerRole*/
+              TLV_add(&send_tlv, GUI_IND_POWERROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_PowerRole});
+            }
+            break;
+          case USBPD_NOTIFY_GETSNKCAP_ACCEPTED :
+            /* NumberOfRcvSNKPDO */
+            TLV_add(&send_tlv, GUI_IND_NUMBEROFRCVSNKPDO, 1, (uint8_t[]){GUI_SaveInformation[PortNum].NumberOfRcvSNKPDO});
+            /* ListOfRcvSNKPDO*/
+            TLV_add(&send_tlv, GUI_IND_LISTOFRCVSNKPDO, GUI_SaveInformation[PortNum].NumberOfRcvSNKPDO * 4, (uint8_t *) GUI_SaveInformation[PortNum].ListOfRcvSNKPDO);
+            break;
+          case USBPD_NOTIFY_GETSRCCAP_ACCEPTED :
+            /* NumberOfRcvSRCPDO*/
+            TLV_add(&send_tlv, GUI_IND_NUMBEROFRCVSRCPDO, 1, (uint8_t[]){GUI_SaveInformation[PortNum].NumberOfRcvSRCPDO});
+            /* ListOfRcvSRCPDO*/
+            TLV_add(&send_tlv, GUI_IND_LISTOFRCVSRCPDO, GUI_SaveInformation[PortNum].NumberOfRcvSRCPDO * 4, (uint8_t *) GUI_SaveInformation[PortNum].ListOfRcvSRCPDO);
+            break;
+          case USBPD_NOTIFY_POWER_EXPLICIT_CONTRACT :
+            if (USBPD_PORTPOWERROLE_SNK == DPM_Params[PortNum].PE_PowerRole)
+            {
+              /* NumberOfRcvSRCPDO*/
+              TLV_add(&send_tlv, GUI_IND_NUMBEROFRCVSRCPDO, 1, (uint8_t[]){GUI_SaveInformation[PortNum].NumberOfRcvSRCPDO});
+              /* ListOfRcvSRCPDO*/
+              TLV_add(&send_tlv, GUI_IND_LISTOFRCVSRCPDO, GUI_SaveInformation[PortNum].NumberOfRcvSRCPDO * 4, (uint8_t *) GUI_SaveInformation[PortNum].ListOfRcvSRCPDO);
+            }
+            /* RDOPosition */
+            TLV_add(&send_tlv, GUI_IND_RDOPOSITION, 1, (uint8_t[]){GUI_SaveInformation[PortNum].RDOPosition});
+            /* DataRole*/
+            TLV_add(&send_tlv, GUI_IND_DATAROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_DataRole});
+            /* PowerRole*/
+            TLV_add(&send_tlv, GUI_IND_POWERROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_PowerRole});
+            /* VconnON*/
+            TLV_add(&send_tlv, GUI_IND_VCONNON, 1, (uint8_t[]){DPM_Params[PortNum].VconnStatus});
+            /* PD_SpecRevision */
+            TLV_add(&send_tlv, GUI_IND_PD_SPECREVISION, 1, (uint8_t[]){DPM_Params[PortNum].PE_SpecRevision});
+            break;
+          case USBPD_NOTIFY_POWER_SWAP_TO_SNK_DONE :
+          case USBPD_NOTIFY_POWER_SWAP_TO_SRC_DONE :
+            /* PowerRole*/
+            TLV_add(&send_tlv, GUI_IND_POWERROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_PowerRole});
+            break;
+          case USBPD_NOTIFY_DATAROLESWAP_UFP :
+          case USBPD_NOTIFY_DATAROLESWAP_DFP :
+            /* DataRole*/
+            TLV_add(&send_tlv, GUI_IND_DATAROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_DataRole});
+            break;
+          case USBPD_NOTIFY_PD_SPECIFICATION_CHANGE :
+            /* PD_SpecRevision */
+            TLV_add(&send_tlv, GUI_IND_PD_SPECREVISION, 1, (uint8_t[]){DPM_Params[PortNum].PE_SpecRevision});
+            break;
+          case USBPD_NOTIFY_VCONN_SWAP_COMPLETE :
+            /* VconnON */
+            TLV_add(&send_tlv, GUI_IND_VCONNON, 1, (uint8_t[]){DPM_Params[PortNum].VconnStatus});
+            break;
+#if _PPS
+          case USBPD_NOTIFY_PPS_STATUS_RECEIVED :
+            /* PPS value */
+            TLV_add(&send_tlv, GUI_IND_PPS, 4, (uint8_t*)&GUI_SaveInformation[PortNum].RcvPPSStatus.d32);
+            break;
+#endif /* _PPS */
+#if _STATUS
+          case USBPD_NOTIFY_STATUS_RECEIVED :
+            {
+              uint8_t tab[5] = {
+                GUI_SaveInformation[PortNum].RcvStatus.InternalTemp,
+                GUI_SaveInformation[PortNum].RcvStatus.PresentInput,
+                GUI_SaveInformation[PortNum].RcvStatus.PresentBatteryInput,
+                GUI_SaveInformation[PortNum].RcvStatus.EventFlags,
+                GUI_SaveInformation[PortNum].RcvStatus.TemperatureStatus
+              };
+              /* Status value */
+              TLV_add(&send_tlv, GUI_IND_STATUS, 5, tab);
+            }
+            break;
+#endif /* _STATUS */
+#ifdef _VDM
+          case USBPD_NOTIFY_VDM_IDENTIFY_RECEIVED :
+            TLV_add(&send_tlv, GUI_IND_VDM_IDENTITY, 4, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_DiscoIdentify.IDHeader.d32);
+            break;
+          case USBPD_NOTIFY_VDM_SVID_RECEIVED :
+            {
+              uint32_t index;
+              uint16_t size;
+              /* List of received SVDM SVID */
+              if (0 != GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.NumSVIDs)
+              {
+                TLV_add(&send_tlv, GUI_IND_SVDM_SVIDS, 2, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.SVIDs[0]);
+                size = 2;
+                for (index = 1; index < GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.NumSVIDs; index++)
+                {
+                  TLV_addValue(&send_tlv, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.SVIDs[index], 2);
+                  size += 2;
+                }
+                TLV_UpdateSizeTag(&send_tlv, size);
+              }
+            }
+            break;
+          case USBPD_NOTIFY_VDM_MODE_RECEIVED :
+            {
+              uint32_t index;
+              uint16_t size;
+              /* List of received SVDM MODES */
+              if (0 != GUI_SaveInformation[PortNum].VDM_ModesPortPartner.NumModes)
+              {
+                TLV_add(&send_tlv, GUI_IND_SVDM_MODES, 4, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_ModesPortPartner.Modes[0]);
+                size = 4;
+                for (index = 1; index < GUI_SaveInformation[PortNum].VDM_ModesPortPartner.NumModes; index++)
+                {
+                  TLV_addValue(&send_tlv, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_ModesPortPartner.Modes[index], 4);
+                  size += 4;
+                }
+                TLV_UpdateSizeTag(&send_tlv, size);
+              }
+            }
+            break;
+#endif /* _VDM */
+#if defined(_VCONN_SUPPORT)
+          case USBPD_NOTIFY_VDM_CABLE_IDENT_RECEIVED :
+            TLV_add(&send_tlv, GUI_IND_CABLE_VDO, 4, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_DiscoCableIdentify.CableVDO.d32);
+            break;
+#endif /* _VCONN_SUPPORT */
+        }
+      }
+      else
+      {
+        /* Send all the indication parameters if connected */
+        if (USBPD_TRUE == DPM_Params[PortNum].PE_IsConnected)
+        {
+#if defined(_VDM)
+          uint32_t index;
+#endif /* _VDM */
+
+          if (0 != GUI_SaveInformation[PortNum].NumberOfRcvSNKPDO)
+          {
+            /* NumberOfRcvSNKPDO */
+            TLV_add(&send_tlv, GUI_IND_NUMBEROFRCVSNKPDO, 1, (uint8_t[]){GUI_SaveInformation[PortNum].NumberOfRcvSNKPDO});
+            /* ListOfRcvSNKPDO*/
+            TLV_add(&send_tlv, GUI_IND_LISTOFRCVSNKPDO, GUI_SaveInformation[PortNum].NumberOfRcvSNKPDO * 4, (uint8_t *) GUI_SaveInformation[PortNum].ListOfRcvSNKPDO);
+          }
+          /* RDOPosition */
+          TLV_add(&send_tlv, GUI_IND_RDOPOSITION, 1, (uint8_t[]){GUI_SaveInformation[PortNum].RDOPosition});
+          if (USBPD_PORTPOWERROLE_SNK == DPM_Params[PortNum].PE_PowerRole)
+          {
+            /* NumberOfRcvSRCPDO*/
+            TLV_add(&send_tlv, GUI_IND_NUMBEROFRCVSRCPDO, 1, (uint8_t[]){GUI_SaveInformation[PortNum].NumberOfRcvSRCPDO});
+            /* ListOfRcvSRCPDO*/
+            TLV_add(&send_tlv, GUI_IND_LISTOFRCVSRCPDO, GUI_SaveInformation[PortNum].NumberOfRcvSRCPDO * 4, (uint8_t *) GUI_SaveInformation[PortNum].ListOfRcvSRCPDO);
+          }
+          /* PD_SpecRevision */
+          TLV_add(&send_tlv, GUI_IND_PD_SPECREVISION, 1, (uint8_t[]){DPM_Params[PortNum].PE_SpecRevision});
+
+#if defined(USBPD_REV30_SUPPORT)
+#if _SRC_CAPA_EXT
+          /* Number of batteries supported by the port partner */
+          TLV_add(&send_tlv, GUI_IND_NBBATTERIES, 1, (uint8_t[]){GUI_SaveInformation[PortNum].RcvSRCExtendedCapa.NbBatteries});
+#endif /* _SRC_CAPA_EXT */
+#endif /* USBPD_REV30_SUPPORT */
+
+#if defined(_VDM)
+          if (0 != GUI_SaveInformation[PortNum].VDM_DiscoIdentify.IDHeader.d32)
+          {
+            TLV_add(&send_tlv, GUI_IND_VDM_IDENTITY, 4, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_DiscoIdentify.IDHeader.d32);
+          }
+#if defined(_VCONN_SUPPORT)
+          if (1 == GUI_SaveInformation[PortNum].VDM_DiscoCableIdentify.CableVDO_Presence)
+          {
+            TLV_add(&send_tlv, GUI_IND_CABLE_VDO, 4, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_DiscoCableIdentify.CableVDO.d32);
+          }
+#endif /* _VCONN_SUPPORT */
+          /* List of received SVDM SVID */
+          if (0 != GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.NumSVIDs)
+          {
+            uint16_t size;
+            TLV_add(&send_tlv, GUI_IND_SVDM_SVIDS, 2, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.SVIDs[0]);
+            size = 2;
+            for (index = 1; index < GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.NumSVIDs; index++)
+            {
+              TLV_addValue(&send_tlv, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_SVIDPortPartner.SVIDs[index], 2);
+              size += 2;
+            }
+            TLV_UpdateSizeTag(&send_tlv, size);
+          }
+
+          /* List of received SVDM MODES */
+          if (0 != GUI_SaveInformation[PortNum].VDM_ModesPortPartner.NumModes)
+          {
+            uint16_t size;
+            TLV_add(&send_tlv, GUI_IND_SVDM_MODES, 4, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_ModesPortPartner.Modes[0]);
+            size = 4;
+            for (index = 1; index < GUI_SaveInformation[PortNum].VDM_ModesPortPartner.NumModes; index++)
+            {
+              TLV_addValue(&send_tlv, (uint8_t*)&GUI_SaveInformation[PortNum].VDM_ModesPortPartner.Modes[index], 4);
+              size += 4;
+            }
+            TLV_UpdateSizeTag(&send_tlv, size);
+          }
+#endif /* _VDM */
+        }
+      }
+    }
+
+    /* Check if notification linked to a measure report */
+    if ((TypeNotification & GUI_NOTIF_MEASUREREPORTING) == GUI_NOTIF_MEASUREREPORTING)
+    {
+      uint32_t vsense = 0;
+      int32_t isense = 0;
+
+      TLV_add(&send_tlv, GUI_IND_TIMESTAMP, 4, (uint8_t*)&Value);
+
+      if (NULL != pCB_GetVoltage)
+      {
+        vsense = pCB_GetVoltage(PortNum);
+      }
+      if (NULL != pCB_GetVoltage)
+      {
+        isense = pCB_GetCurrent(PortNum);
+      if(isense < 0)
+      {
+        isense = -isense;
+      }
+      }
+
+      /* VBUS & IBUS level */
+      vsense = (isense << 16) | vsense;
+      TLV_add(&send_tlv, GUI_IND_VBUS_LEVEL, 4, (uint8_t*)&vsense);
+    }
+
+    /* Check if timestamp */
+    if ((TypeNotification & GUI_NOTIF_TIMESTAMP) == GUI_NOTIF_TIMESTAMP)
+    {
+      TLV_add(&send_tlv, GUI_IND_TIMESTAMP, 4, (uint8_t*)&Value);
+    }
+
+    /* Check if power change */
+    if ((TypeNotification & GUI_NOTIF_POWER_EVENT) == GUI_NOTIF_POWER_EVENT)
+    {
+      /* Is Connected*/
+      TLV_add(&send_tlv, GUI_IND_ISCONNECTED, 1, (uint8_t[]){DPM_Params[PortNum].PE_Power});
+      if (USBPD_POWER_NO == DPM_Params[PortNum].PE_Power)
+      {
+        /* CC line */
+        TLV_add(&send_tlv, GUI_IND_CC, 1, (uint8_t[]){DPM_Params[PortNum].ActiveCCIs});
+        /* PowerRole*/
+        TLV_add(&send_tlv, GUI_IND_POWERROLE, 1, (uint8_t[]){DPM_Params[PortNum].PE_PowerRole});
+      }
+    }
+
+    TLV_deinit_encode(&send_tlv);
+
+    if (0 != TLV_get_string_length(Processed))
+    {
+      *pMsgToSend = Processed;
+      *pSizeMsg = TLV_get_string_length(Processed) + 8;
+      gui_state = GUI_STATE_RUNNING;
+
+    }
+  
+  }
+
+  return gui_state;
+}
+
+/**
+  * @brief  Callback function called by PE to inform GUI about PE event.
+  * @param  PortNum   Port number
+  * @param  EventVal Event vale @ref USBPD_NotifyEventValue_TypeDef
+  * @retval None
+  */
+void GUI_PostNotificationMessage(uint8_t PortNum, uint16_t EventVal)
+{
+#if defined(_SNK) || defined(_DRP)
+  if (USBPD_NOTIFY_REQUEST_ACCEPTED == EventVal)
+  {
+    DPM_USER_Settings[PortNum].DPM_SNKRequestedPower.OperatingVoltageInmVunits    = GUI_SaveInformation[PortNum].RequestedVoltage;
+    DPM_USER_Settings[PortNum].DPM_SNKRequestedPower.OperatingPowerInmWunits      = (GUI_SaveInformation[PortNum].RequestedVoltage * GUI_SaveInformation[PortNum].RequestedCurrent) / 1000;
+  }
+#endif /* _SNK || _DRP */
+  
+  /* Send a notitification only if GUI is running */
+  if (GUI_State == GUI_STATE_RUNNING)
+  {
+    uint32_t event = GUI_USER_EVENT_GUI | (PortNum << GUI_PE_PORT_NUM_Pos) | (EventVal << GUI_PE_NOTIF_Pos);
+#if defined(_RTOS)
+#if (osCMSIS < 0x20000U)
+    (void)osMessagePut(GUIMsgBox, event, 0);
+#else
+    (void)osMessageQueuePut(GUIMsgBox, &event, 0U, 0U);
+#endif /* osCMSIS < 0x20000U */
+#else
+    GUI_Flag = event;
+#if defined(USE_STM32_UTILITY_OS)
+    GUI_RXProcess(GUI_Flag);
+    GUI_Flag = GUI_USER_EVENT_NONE;
+#endif /* USE_STM32_UTILITY_OS */
+#endif /* _RTOS */
+  }
+}
+
+/**
+  * @brief  Check is GUI is connected to the board or not
+  * @retval USBPD state
+  */
+USBPD_FunctionalState GUI_IsRunning(void)
+{
+  return ((GUI_State == GUI_STATE_RUNNING) ? USBPD_ENABLE : USBPD_DISABLE);
+}
+
+/**
+  * @brief  GUI callback to save information coming from PortPartner
+  * @param  PortNum Port number
+  * @param  DataId  Type of data to be updated in DPM based on @ref USBPD_CORE_DataInfoType_TypeDef
+  * @param  Ptr     Pointer on the data
+  * @param  Size    Nb of bytes to be updated in GUI
+  * @retval None
+  */
+void GUI_SaveInfo(uint8_t PortNum, uint8_t DataId, uint8_t *Ptr, uint32_t Size)
+{
+  uint32_t index;
+
+  /* Check type of information targeted by request */
+  switch (DataId)
+  {
+    /* Case requested DO position Data information :
+    */
+  case USBPD_CORE_DATATYPE_RDO_POSITION :
+    if (Size == 4)
+    {
+      uint8_t* temp;
+      temp = (uint8_t*)&GUI_SaveInformation[PortNum].RDOPosition;
+      (void)memcpy(temp, Ptr, Size);
+      GUI_SaveInformation[PortNum].RDOPositionPrevious = *Ptr;
+      temp = (uint8_t*)&GUI_SaveInformation[PortNum].RDOPositionPrevious;
+      (void)memcpy(temp, Ptr, Size);
+    }
+    break;
+
+    /* Case Received Source PDO values Data information :
+    */
+  case USBPD_CORE_DATATYPE_RCV_SRC_PDO :
+    if (Size <= (USBPD_MAX_NB_PDO * 4))
+    {
+      uint8_t* rdo;
+      GUI_SaveInformation[PortNum].NumberOfRcvSRCPDO = (Size / 4);
+      /* Copy PDO data in DPM Handle field */
+      for (index = 0; index < (Size / 4); index++)
+      {
+        rdo = (uint8_t*)&GUI_SaveInformation[PortNum].ListOfRcvSRCPDO[index];
+        (void)memcpy(rdo, (Ptr + (index * 4u)), (4u * sizeof(uint8_t)));
+      }
+    }
+    break;
+
+    /* Case Received Sink PDO values Data information :
+    */
+  case USBPD_CORE_DATATYPE_RCV_SNK_PDO :
+    if (Size <= (USBPD_MAX_NB_PDO * 4))
+    {
+      uint8_t* rdo;
+      GUI_SaveInformation[PortNum].NumberOfRcvSNKPDO = (Size / 4);
+      /* Copy PDO data in DPM Handle field */
+      for (index = 0; index < (Size / 4); index++)
+      {
+        rdo = (uint8_t*)&GUI_SaveInformation[PortNum].ListOfRcvSNKPDO[index];
+        (void)memcpy(rdo, (Ptr + (index * 4u)), (4u * sizeof(uint8_t)));
+      }
+    }
+    break;
+
+    /* Case Received Request PDO Data information :
+    */
+  case USBPD_CORE_DATATYPE_RCV_REQ_PDO :
+    if (Size == 4)
+    {
+      uint8_t* rdo;
+      rdo = (uint8_t*)&GUI_SaveInformation[PortNum].RcvRequestDOMsg;
+      (void)memcpy(rdo, Ptr, Size);
+    }
+    break;
+
+#if defined(USBPD_REV30_SUPPORT)
+#if _STATUS
+  case USBPD_CORE_INFO_STATUS :
+    {
+      uint8_t* info_status;
+      info_status = (uint8_t*)&GUI_SaveInformation[PortNum].RcvStatus;
+      memcpy(info_status, Ptr, Size);
+    }
+    break;
+#endif /* _STATUS */
+#if _PPS
+  case USBPD_CORE_PPS_STATUS :
+    {
+      uint8_t*  ext_capa;
+      ext_capa = (uint8_t*)&GUI_SaveInformation[PortNum].RcvPPSStatus;
+      memcpy(ext_capa, Ptr, Size);
+    }
+    break;
+#endif /* _PPS */
+#if _SRC_CAPA_EXT
+  case USBPD_CORE_EXTENDED_CAPA :
+    {
+      uint8_t*  ext_capa;
+      ext_capa = (uint8_t*)&GUI_SaveInformation[PortNum].RcvSRCExtendedCapa;
+      memcpy(ext_capa, Ptr, Size);
+    }
+    break;
+#endif /* _SRC_CAPA_EXT */
+#if defined(USBPDCORE_SNK_CAPA_EXT)
+  case USBPD_CORE_SNK_EXTENDED_CAPA :
+    {
+      uint8_t*  _snk_ext_capa;
+      _snk_ext_capa = (uint8_t*)&GUI_SaveInformation[PortNum].RcvSNKExtendedCapa;
+      memcpy(_snk_ext_capa, Ptr, Size);
+    }
+    break;
+#endif /* USBPDCORE_SNK_CAPA_EXT */
+#if _MANU_INFO
+  case USBPD_CORE_GET_MANUFACTURER_INFO:
+    {
+      uint8_t* temp = (uint8_t*)Ptr;
+      GUI_SaveInformation[PortNum].GetManufacturerInfo.ManufacturerInfoTarget = *temp;
+      GUI_SaveInformation[PortNum].GetManufacturerInfo.ManufacturerInfoRef    = *(temp + 1);
+    }
+    break;
+#endif /* _MANU_INFO */
+#if _BATTERY
+  case USBPD_CORE_BATTERY_STATUS:
+    GUI_SaveInformation[PortNum].BatteryStatus.d32 = *Ptr;
+    break;
+
+  case USBPD_CORE_GET_BATTERY_STATUS:
+    {
+      GUI_SaveInformation[PortNum].GetBatteryStatus.BatteryStatusRef = *(uint8_t*)Ptr;
+    }
+    break;
+
+  case USBPD_CORE_GET_BATTERY_CAPABILITY:
+    {
+      uint8_t* temp = (uint8_t*)Ptr;
+      GUI_SaveInformation[PortNum].GetBatteryCapability.BatteryCapRef= *temp;
+    }
+    break;
+#endif /* _BATTERY */
+#if _ALERT
+    case USBPD_CORE_ALERT:
+      {
+        uint8_t*  alert;
+        alert = (uint8_t*)&GUI_SaveInformation[PortNum].RcvAlert.d32;
+        memcpy(alert, Ptr, Size);
+      }
+      break;
+#endif /* _ALERT */
+#endif /* USBPD_REV30_SUPPORT */
+#if defined(_VCONN_SUPPORT)
+    case GUI_VDM_CABLE_INFO:
+      {
+        uint8_t*  disco_ident;
+        disco_ident = (uint8_t*)&GUI_SaveInformation[PortNum].VDM_DiscoCableIdentify;
+        memcpy(disco_ident, Ptr, Size);
+      }
+      break;
+#endif /* _VCONN_SUPPORT */
+
+  /* In case of unexpected data type (Set request could not be fulfilled) :
+   */
+  default :
+    break;
+  }
+}
+
+/**
+  * @brief  Register callback function to be used with Free Text feature
+  * @param  CB_FreeText Callback function to register (port number, payload and size)
+  * @retval None
+  */
+void GUI_RegisterCallback_FreeText(USBPD_StatusTypeDef (*CB_FreeText)(uint8_t, uint8_t*, uint16_t))
+{
+  pCB_FreeText = CB_FreeText;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup USBPD_GUI_API_Private_Functions GUI API Private Functions
+  * @{
+  */
+/**
+  * @brief  Send DPM_INIT_CNF message to GUI
+  * @param  PortNum   Port number
+  * @param  pEncodedMsg Pointer on the message to be encoded
+  * @retval None
+  */
+static void Send_DpmInitCnf(uint8_t PortNum, uint8_t *pEncodedMsg)
+{
+  TLV_ToSend_Data ToSendTLV;
+  TLV_init_encode(&ToSendTLV, __GUI_SET_TAG_ID(PortNum, DPM_INIT_CNF), TLV_SIZE_MAX, pEncodedMsg);
+
+  /* Information by board */
+  if (0 == PortNum)
+  {
+    /* HWBoardVersion */
+    const uint8_t* hwversion;
+    if (NULL != pCB_HWBoardVersion)
+    {
+      hwversion = pCB_HWBoardVersion();
+    }
+    else
+    {
+      hwversion = (uint8_t*) "UNKNOWN";
+    }
+    TLV_add(&ToSendTLV, GUI_INIT_HWBOARDVERSION, strlen((const char*)hwversion), hwversion);
+
+    /* HWPDType */
+    const uint8_t* hwpdtype;
+    if (NULL != pCB_HWBoardVersion)
+    {
+      hwpdtype  = pCB_HWPDType();
+    }
+    else
+    {
+      hwpdtype = (uint8_t*) "UNKNOWN";
+    }
+    TLV_add(&ToSendTLV, GUI_INIT_HWPDTYPE, strlen((const char*)hwpdtype), hwpdtype);
+
+    /* NbPortMax */
+    TLV_add(&ToSendTLV, GUI_INIT_NBPORTMAX, 1, (uint8_t[]){USBPD_PORT_COUNT});
+    /* FW Version */
+    TLV_add(&ToSendTLV, GUI_INIT_FWVERSION, 8, (uint8_t[]){
+      (USBPD_FW_VERSION & 0x000000FF),
+        (USBPD_FW_VERSION & 0x0000FF00) >> 8,
+          (USBPD_FW_VERSION & 0x00FF0000) >> 16,
+            (USBPD_FW_VERSION & 0xFF000000) >> 24,
+      (_LIB_ID & 0x000000FF),
+        (_LIB_ID & 0x0000FF00) >> 8,
+          (_LIB_ID & 0x00FF0000) >> 16,
+            (_LIB_ID & 0xFF000000) >> 24}
+    );
+    /* Start Port number */
+    TLV_add(&ToSendTLV, GUI_INIT_NB_PORT_START, 1, (uint8_t[]){USBPD_START_PORT_NUMBER});
+    /* Start Port number */
+    TLV_add(&ToSendTLV, GUI_INIT_NB_PORT_START, 1, (uint8_t[]){USBPD_START_PORT_NUMBER});
+
+    /* Original settings */
+    TLV_add(&ToSendTLV, GUI_INIT_ORIGINAL_SETTINGS, 1, (uint8_t*)&GUI_OriginalSettings);
+
+    TLV_deinit_encode(&ToSendTLV);
+  }
+  else
+  {
+    uint16_t settings;
+    uint8_t port = PortNum - 1;
+#if defined(MB1303)
+    uint16_t fake = 0xADDE;
+#endif /*MB1303*/
+    /* TypeCSpecVersion & PDSpecRevision */
+    settings = DPM_Settings[port].PE_SpecRevision;
+    TLV_add(&ToSendTLV, GUI_INIT_TYPECSPECREVISION, 2, (uint8_t[]){0x12, settings});
+#if defined(USBPD_REV30_SUPPORT)
+    /* Extended Messages UnCkunked */
+    settings = DPM_Settings[port].PE_PD3_Support.d.PE_UnchunkSupport;
+    TLV_add(&ToSendTLV, GUI_INIT_EXTENDEDMESSAGESUNCKUNKED, 1, (uint8_t*)&settings);
+#endif /* USBPD_REV30_SUPPORT */
+    /* AccessorySupp */
+    settings = DPM_Settings[port].CAD_AccesorySupport;
+    TLV_add(&ToSendTLV, GUI_INIT_ACCESSORYSUPP, 1, (uint8_t*)&settings);
+    /*PowerAccessoryDetection*/
+    settings = DPM_USER_Settings[port].PWR_AccessoryDetection;
+    TLV_add(&ToSendTLV, GUI_INIT_POWERACCESSORYDETECTION, 1, (uint8_t*)&settings);
+    /*PowerAccessoryTransition*/
+    settings = DPM_USER_Settings[port].PWR_AccessoryTransition;
+    TLV_add(&ToSendTLV, GUI_INIT_POWERACCESSORYTRANSITION, 1, (uint8_t*)&settings);
+    /*IsCable*/
+    TLV_add(&ToSendTLV, GUI_INIT_ISCABLE, 1, (uint8_t[]){0x00});
+    /*TryFeature*/
+    settings = DPM_Settings[port].CAD_TryFeature;
+    TLV_add(&ToSendTLV, GUI_INIT_TRYFEATURE, 1, (uint8_t*)&settings);
+    /*RpResistorValue*/
+    settings = DPM_USER_Settings[port].PWR_RpResistorValue;
+    TLV_add(&ToSendTLV, GUI_INIT_RPRESISTORVALUE, 1, (uint8_t*)&settings);
+    /*USBSupport*/
+    settings = DPM_USER_Settings[port].USB_Support;
+    TLV_add(&ToSendTLV, GUI_INIT_USBSUPPORT, 1, (uint8_t*)&settings);
+    /*USBDevice*/
+    settings = DPM_USER_Settings[port].USB_Device;
+    TLV_add(&ToSendTLV, GUI_INIT_USBDEVICE, 1, (uint8_t*)&settings);
+    /*USBHost*/
+    settings = DPM_USER_Settings[port].USB_Host;
+    TLV_add(&ToSendTLV, GUI_INIT_USBHOST, 1, (uint8_t*)&settings);
+    /*Externally_Powered*/
+    settings = DPM_USER_Settings[port].PWR_UnconstrainedPower;
+    TLV_add(&ToSendTLV, GUI_INIT_UNCONSTRAINED_POWERED, 1, (uint8_t*)&settings);
+    /*USBSuspendSupport*/
+    settings = DPM_USER_Settings[port].USB_SuspendSupport;
+    TLV_add(&ToSendTLV, GUI_INIT_USBSUSPENDSUPPORT, 1, (uint8_t*)&settings);
+#if defined(MB1303)
+    /*VConnDischarge*/
+    TLV_add(&ToSendTLV, GUI_INIT_VCONNDISCHARGE, 2, (uint8_t*)&fake);
+    /*VConnLim*/
+    TLV_add(&ToSendTLV, GUI_INIT_VCONNILIM, 2, (uint8_t*)&fake);
+    /*VConnLimValue*/
+    TLV_add(&ToSendTLV, GUI_INIT_VCONNILIMVALUE, 2, (uint8_t*)&fake);
+    /*VConnMonitoring*/
+    TLV_add(&ToSendTLV, GUI_INIT_VCONNMONITORING, 2, (uint8_t*)&fake);
+    /*VConnThresholdUVLO*/
+    TLV_add(&ToSendTLV, GUI_INIT_VCONNTHRESHOLDUVLO, 2, (uint8_t*)&fake);
+    /*VConnSupply*/
+    TLV_add(&ToSendTLV, GUI_INIT_VCONNSUPPLY, 2, (uint8_t*)&fake);
+#endif /*MB1303*/
+
+    TLV_deinit_encode(&ToSendTLV);
+  }
+}
+
+/**
+  * @brief      Execution of the message received
+  * @note       Generation of a TLV instruction to send in the context of DPM_MESSAGE
+  */
+static void Request_MessageReq(uint8_t PortNum, uint8_t* instruction, uint8_t *pEncodedMsg)
+{
+  USBPD_StatusTypeDef status = USBPD_ERROR;
+  TLV_Received_Data process_tlv;
+  TLV_ToSend_Data send_tlv;
+
+  TLV_init_decode(&process_tlv, instruction);
+  TLV_init_encode(&send_tlv, __GUI_SET_TAG_ID((PortNum + 1), DPM_MESSAGE_CNF), TLV_SIZE_MAX, pEncodedMsg);
+
+  /*
+    In case there is an error, we use this variable to know when to send a DPM_MESSAGE_REJ
+    instead of a DPM_MESSAGE_CNF. This variable contains the cause if there is one.
+  */
+  USBPD_GUI_Reject_Reason error = GUI_REJ_DPM_REJECT;
+
+  uint8_t tag;
+  uint16_t length;
+  uint8_t *value;
+  TLV_get(&process_tlv, &tag, &length, &value);
+  switch(tag)
+    /*
+      Each case should:
+      - Apply his specific request in the stack. If parameters are needed, they can be found in the value pointer
+      - If there is an error, set the error variable according to it (cf USBPD_GUI_Specification)
+      - Otherwise in case of success, do nothing else
+    */
+  {
+  case GUI_MSG_GOTOMIN :
+    status = USBPD_DPM_RequestGotoMin(PortNum);
+    break;
+  case GUI_MSG_PING :
+    status = USBPD_DPM_RequestPing(PortNum);
+    break;
+  case GUI_MSG_GET_SRC_CAPA :
+    status = USBPD_DPM_RequestGetSourceCapability(PortNum);
+    break;
+  case GUI_MSG_GET_SNK_CAPA :
+    status = USBPD_DPM_RequestGetSinkCapability(PortNum);
+    break;
+  case GUI_MSG_DR_SWAP :
+    status = USBPD_DPM_RequestDataRoleSwap(PortNum);
+    break;
+  case GUI_MSG_PR_SWAP :
+    status = USBPD_DPM_RequestPowerRoleSwap(PortNum);
+    break;
+  case GUI_MSG_VCONN_SWAP :
+    status = USBPD_DPM_RequestVconnSwap(PortNum);
+    break;
+  case GUI_MSG_SOURCE_CAPA :
+    status = USBPD_DPM_RequestSourceCapability(PortNum);
+    break;
+  case GUI_MSG_REQUEST :
+    {
+      uint16_t voltage = 0;
+      uint8_t nb_expected_tag = 0;
+      uint8_t index_pdo = 0;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 2))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_RDOPOSITION == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          index_pdo = value[0];
+        }
+        else if (GUI_PARAM_MSG_REQUESTEDVOLTAGE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          voltage = LE16(&value[0]);
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (2 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestMessageRequest(PortNum, index_pdo, voltage);
+      }
+    }
+    break;
+  case GUI_MSG_SOFT_RESET :
+    TLV_get(&process_tlv, &tag, &length, &value);
+    if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+    {
+      status = USBPD_DPM_RequestSoftReset(PortNum, (USBPD_SOPType_TypeDef)value[0]);
+    }
+    break;
+  case GUI_MSG_HARD_RESET :
+    status = USBPD_DPM_RequestHardReset(PortNum);
+    break;
+  case GUI_MSG_CABLE_RESET :
+    status = USBPD_DPM_RequestCableReset(PortNum);
+    break;
+#if defined(_VDM) || defined(_VCONN_SUPPORT)
+  case GUI_MSG_VDM_DISCO_IDENT :
+    if (length > TLV_SIZE_MAX) break;
+    TLV_get(&process_tlv, &tag, &length, &value);
+    if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+    {
+      status = USBPD_DPM_RequestVDM_DiscoveryIdentify(PortNum, (USBPD_SOPType_TypeDef)value[0]);
+    }
+    break;
+  case GUI_MSG_VDM_DISCO_SVID :
+    if (length > TLV_SIZE_MAX) break;
+    TLV_get(&process_tlv, &tag, &length, &value);
+    if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+    {
+      status = USBPD_DPM_RequestVDM_DiscoverySVID(PortNum, (USBPD_SOPType_TypeDef)value[0]);
+    }
+    break;
+  case GUI_MSG_VDM_DISCO_MODE :
+    {
+      uint16_t svid = 0;
+      uint8_t nb_expected_tag = 0;
+      uint8_t sop = USBPD_SOPTYPE_SOP;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 2))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          sop = value[0];
+        }
+        else if (GUI_PARAM_MSG_SVDM_SVID == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          svid = LE16(&value[0]);
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (2 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestVDM_DiscoveryMode(PortNum, (USBPD_SOPType_TypeDef)sop, svid);
+      }
+    }
+    break;
+  case GUI_MSG_VDM_ENTER_MODE :
+    {
+      uint16_t mode = 0, svid = 0;
+      uint8_t nb_expected_tag = 0;
+      uint8_t sop = USBPD_SOPTYPE_SOP;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 3))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          sop = value[0];
+        }
+        else if (GUI_PARAM_MSG_SVDM_SVID == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          svid = LE16(&value[0]);
+        }
+        else if (GUI_PARAM_MSG_SVDM_MODEINDEX == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          mode = LE16(&value[0]);
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (3 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestVDM_EnterMode(PortNum, (USBPD_SOPType_TypeDef)sop, svid, mode);
+      }
+    }
+    break;
+  case GUI_MSG_VDM_EXIT_MODE :
+    {
+      uint16_t svid = 0, mode = 0;
+      uint8_t nb_expected_tag = 0;
+      uint8_t sop = USBPD_SOPTYPE_SOP;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 3))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          sop = value[0];
+        }
+        else if (GUI_PARAM_MSG_SVDM_SVID == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          svid = LE16(&value[0]);
+        }
+        else if (GUI_PARAM_MSG_SVDM_MODEINDEX == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          mode = value[0];
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (3 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestVDM_ExitMode(PortNum, (USBPD_SOPType_TypeDef)sop, svid, mode);
+      }
+    }
+    break;
+  case GUI_MSG_VDM_UNSTRUCTURED :
+    break;
+#endif /* _VDM || _VCONN_SUPPORT */
+#if defined(_VDM)
+  case GUI_MSG_DISPLAY_PORT_STATUS :
+    {
+      uint32_t dp_status;
+      uint16_t svid = 0;
+      uint8_t nb_expected_tag = 0;
+      uint8_t sop = USBPD_SOPTYPE_SOP;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 3))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          sop = value[0];
+        }
+        else if (GUI_PARAM_MSG_SVDM_SVID == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          svid = LE16(&value[0]);
+        }
+        else if (GUI_PARAM_MSG_DP_STATUS == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          dp_status = LE32(&value[0]);
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (3 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestDisplayPortStatus(PortNum, (USBPD_SOPType_TypeDef)sop, svid, &dp_status);
+      }
+    }
+    break;
+  case GUI_MSG_DISPLAY_PORT_CONFIG :
+    {
+      uint32_t dp_config;
+      uint16_t svid = 0;
+      uint8_t nb_expected_tag = 0;
+      uint8_t sop = USBPD_SOPTYPE_SOP;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 3))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          sop = value[0];
+        }
+        else if (GUI_PARAM_MSG_SVDM_SVID == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          svid = LE16(&value[0]);
+        }
+        else if (GUI_PARAM_MSG_DP_CONFIGURE== (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          dp_config = LE32(&value[0]);
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (3 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestDisplayPortConfig(PortNum, (USBPD_SOPType_TypeDef)sop, svid, &dp_config);
+      }
+    }
+    break;
+  case GUI_MSG_DISPLAY_PORT_ATTENTION :
+    break;
+  case GUI_MSG_VDM_ATTENTION :
+    {
+      uint16_t svid = 0;
+      uint8_t nb_expected_tag = 0;
+      uint8_t sop = USBPD_SOPTYPE_SOP;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 2))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          sop = value[0];
+        }
+        else if (GUI_PARAM_MSG_SVDM_SVID == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          svid = LE16(&value[0]);
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (2 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestAttention(PortNum, (USBPD_SOPType_TypeDef)sop, svid);
+      }
+    }
+    break;
+#endif /* _VDM */
+  case GUI_MSG_FREE_TEXT :
+    {
+      uint8_t nb_expected_tag = 0;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 1))
+      {
+        nb_expected_tag++;
+      }
+      if (1 == nb_expected_tag)
+      {
+        status = Manage_FreeText(PortNum, value, length);
+      }
+    }
+    break;
+#ifdef USBPD_REV30_SUPPORT
+  case GUI_MSG_FR_SWAP :
+    status = USBPD_DPM_RequestFastRoleSwap(PortNum);
+    break;
+  case GUI_MSG_GET_PPS_STATUS :
+    status = USBPD_DPM_RequestGetPPS_Status(PortNum);
+    break;
+  case GUI_MSG_GET_COUNTRY_CODES :
+    status = USBPD_DPM_RequestGetCountryCodes(PortNum);
+    break;
+  case GUI_MSG_GET_STATUS :
+    status = USBPD_DPM_RequestGetStatus(PortNum);
+    break;
+  case GUI_MSG_GET_SOURCE_CAPA_EXTENDED :
+    status = USBPD_DPM_RequestGetSourceCapabilityExt(PortNum);
+    break;
+  case GUI_MSG_GET_SINK_CAPA_EXTENDED :
+    status = USBPD_DPM_RequestGetSinkCapabilityExt(PortNum);
+    break;
+  case GUI_MSG_ALERT :
+    if (length > TLV_SIZE_MAX) break;
+    TLV_get(&process_tlv, &tag, &length, &value);
+    if (GUI_PARAM_MSG_ALERTMSG == (USBPD_GUI_Tag_ParamMsg)tag)
+    {
+      USBPD_ADO_TypeDef alert;
+      alert.d32 = LE32(&value[0]);
+      status = USBPD_DPM_RequestAlert(PortNum, alert);
+    }
+    break;
+  case GUI_MSG_GET_COUNTRY_INFO :
+    if (length > TLV_SIZE_MAX) break;
+    TLV_get(&process_tlv, &tag, &length, &value);
+    if (GUI_PARAM_MSG_COUNTRYCODE == (USBPD_GUI_Tag_ParamMsg)tag)
+    {
+      uint16_t country_code;
+      country_code = LE16(&value[0]);
+      status = USBPD_DPM_RequestGetCountryInfo(PortNum, country_code);
+    }
+    break;
+  case GUI_MSG_GET_BAT_CAPA :
+    if (length > TLV_SIZE_MAX) break;
+    TLV_get(&process_tlv, &tag, &length, &value);
+    if (GUI_PARAM_MSG_BATTERYREF == (USBPD_GUI_Tag_ParamMsg)tag)
+    {
+      status = USBPD_DPM_RequestGetBatteryCapability(PortNum, (uint8_t*)&value[0]);
+    }
+    break;
+  case GUI_MSG_GET_BAT_STATUS :
+    if (length > TLV_SIZE_MAX) break;
+    TLV_get(&process_tlv, &tag, &length, &value);
+    if (GUI_PARAM_MSG_BATTERYREF == (USBPD_GUI_Tag_ParamMsg)tag)
+    {
+      status = USBPD_DPM_RequestGetBatteryStatus(PortNum, (uint8_t*)&value[0]);
+    }
+    break;
+  case GUI_MSG_GET_MANU_INFO :
+    {
+      uint16_t manu_info;
+      uint8_t nb_expected_tag = 0;
+      uint8_t sop = USBPD_SOPTYPE_SOP;
+      if (length > TLV_SIZE_MAX) break;
+      TLV_get(&process_tlv, &tag, &length, &value);
+      while((0 != length) && (TLV_SIZE_MAX > length) && (nb_expected_tag < 2))
+      {
+        nb_expected_tag++;
+        if (GUI_PARAM_MSG_SOPTYPE == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          sop = value[0];
+        }
+        else if (GUI_PARAM_MSG_MANUINFODATA == (USBPD_GUI_Tag_ParamMsg)tag)
+        {
+          manu_info = LE16(&value[0]);
+        }
+        TLV_get(&process_tlv, &tag, &length, &value);
+      }
+      if (2 == nb_expected_tag)
+      {
+        status = USBPD_DPM_RequestGetManufacturerInfo(PortNum, (USBPD_SOPType_TypeDef)sop, (uint8_t*)&manu_info);
+      }
+    }
+    break;
+  case GUI_MSG_SECU_REQUEST :
+    status = USBPD_DPM_RequestSecurityRequest(PortNum);
+    break;
+  case GUI_MSG_FIRM_UPDATE_REQUEST :
+    break;
+#endif /* USBPD_REV30_SUPPORT */
+  default :
+    break;
+  }
+
+  /* Only applies if an error was specified (= if the case couldn't success)*/
+  if (USBPD_OK != status)
+  {
+    switch (status)
+    {
+    case USBPD_BUSY:
+      error = GUI_REJ_DPM_NOT_READY;
+      break;
+    case USBPD_TIMEOUT:
+      error = GUI_REJ_DPM_TIMEOUT;
+      break;
+    default:
+    case USBPD_NOTSUPPORTED:
+    case USBPD_ERROR:
+      error = GUI_REJ_DPM_REJECT;
+      break;
+    }
+    TLV_deinit_encode(&send_tlv);
+    TLV_init_encode(&send_tlv, __GUI_SET_TAG_ID((PortNum + 1), DPM_MESSAGE_REJ), TLV_SIZE_MAX, pEncodedMsg); /* Turn the tag 0x0A into 0x0B to signal an error*/
+    TLV_addValue(&send_tlv, (uint8_t*)&error, 1);
+  }
+
+  TLV_deinit_encode(&send_tlv);
+  TLV_deinit_decode(&process_tlv);
+}
+
+/**
+  * @brief      Application of the received configuration
+  * @note       Generation of a TLV instruction to send in the context of DPM_CONFIG_SET
+  */
+static void Send_DpmConfigSetCnf(uint8_t PortNum, uint8_t* instruction, uint8_t *pEncodedMsg)
+{
+  TLV_ToSend_Data send_tlv;
+  TLV_Received_Data process_tlv;
+  /*
+    In case there is an error, we use this variable to know when to send a DPM_CONFIG_SET instead
+    of a DPM_MESSAGE_CNF. This variable contains the cause if there is one.
+  */
+  uint8_t *value;
+  uint16_t size;
+  uint16_t dcdrp = 0;
+  uint8_t error = 0xFF;
+  uint8_t param_not_applicated[GUI_PARAM_ALL];         /* List of parameters who could not be applied. */
+  uint8_t counter_param_not_applicated = 0;  /* Counter of not applicated parameters */
+  uint8_t tag, flag_drp = 0, tdrp = 0;
+
+  TLV_init_decode(&process_tlv, instruction);
+  /* This is the pEncodedMsg can be sent as it is at this point, if there isn't any error during application of settings*/
+  TLV_init_encode(&send_tlv, __GUI_SET_TAG_ID((PortNum + 1), DPM_CONFIG_SET_CNF), TLV_SIZE_MAX, pEncodedMsg);
+
+  /* Do while loop, used to parse and apply each parameter */
+  while(0xFF != TLV_get(&process_tlv, &tag, &size, &value))
+    /*
+      As long as we haven't read all the parameters. If error is set, we continue to loop
+      to apply the other parameters if it's because of a DPM_REJECT
+      While loop, used to parse and apply each parameter
+    */
+  {
+    switch((USBPD_GUI_Tag_Param)tag)
+      /*
+        Each case should:
+        - Apply his specific parameter. If data is needed, it can be found in the value pointer
+        - In case of success, do nothing else
+        - Otherwise if there is an error, set the error variable according to it (cf USBPD_GUI_Specification)
+        - If the error is DPM_REJECT (0x00), add the parameter tag to param_not_applicated, using the
+          counter counter_param_not_applicated. It allows to list the rejected parameters in the DPM_CONFIG_REJ
+      */
+    {
+    case GUI_PARAM_SOP :
+#if !defined(USBPDCORE_LIB_NO_PD)
+      /* SOP & SOP1 & SOP2 */
+      /* SOP1_Debug & SOP2_Debug not implemented */
+      DPM_Settings[PortNum].PE_SupportedSOP = value[0];
+#endif /* !USBPDCORE_LIB_NO_PD */
+      break;
+#if defined(USBPD_REV30_SUPPORT)
+    case GUI_PARAM_FASTROLESWAP :
+      /*FastRoleSwap*/
+      DPM_Settings[PortNum].PE_PD3_Support.d.PE_FastRoleSwapSupport = value[0];
+      break;
+#endif /*USBPD_REV30_SUPPORT*/
+    case GUI_PARAM_DATAROLESWAP_TO_UFP :
+      /*DataRoleSwap to UFP */
+      DPM_USER_Settings[PortNum].PE_DR_Swap_To_UFP = value[0];
+      break;
+    case GUI_PARAM_DATAROLESWAP_TO_DFP :
+      /*DataRoleSwap to DFP */
+      DPM_USER_Settings[PortNum].PE_DR_Swap_To_DFP = value[0];
+      break;
+    case GUI_PARAM_DEFAULTPOWERROLE :
+      /*DefaultPowerRole*/
+      DPM_Settings[PortNum].PE_DefaultRole = (USBPD_PortPowerRole_TypeDef)value[0];
+      break;
+#if !defined(USBPDCORE_LIB_NO_PD)
+    case GUI_PARAM_DRP_SUPPORT :
+      /*DRP_Support*/
+      DPM_Settings[PortNum].PE_RoleSwap = value[0];
+      break;
+    case GUI_PARAM_CADROLETOGGLE :
+      /*CADRoleToggle*/
+      DPM_Settings[PortNum].CAD_RoleToggle = value[0];
+      break;
+    case GUI_PARAM_PE_SCAP_HR :
+      /*PE_SCAP_HR*/
+      DPM_Settings[PortNum].PE_CapscounterSupport = value[0];
+      break;
+    case GUI_PARAM_VCONNSWAP :
+      /*VConnSwap*/
+      DPM_USER_Settings[PortNum].PE_VconnSwap = value[0];
+      break;
+#if defined(_VDM)
+    case GUI_PARAM_VDM_SUPPORT :
+      /* DRP Support */
+      DPM_Settings[PortNum].PE_VDMSupport = value[0];
+      break;
+#endif /*_VDM*/
+    case GUI_PARAM_PING_SUPPORT :
+      /* Ping Support */
+      DPM_Settings[PortNum].PE_PingSupport = value[0];
+      break;
+#if defined(USBPD_REV30_SUPPORT)
+    case GUI_PARAM_PPS_SUPPORT :
+      DPM_Settings[PortNum].PE_PD3_Support.PD3_Support = LE16(&value[0]);
+      break;
+#endif /*USBPD_REV30_SUPPORT*/
+#endif /* !USBPDCORE_LIB_NO_PD */
+#if defined(_SNK) || defined(_DRP)
+    case GUI_PARAM_SNK_PDO :
+      {
+        uint32_t index_pdo, index_gui;
+        uint32_t pdo;
+#if USBPD_PORT_COUNT==2
+        if (USBPD_PORT_0 == PortNum)
+#endif /* USBPD_PORT_COUNT==2 */
+        {
+          memset(PORT0_PDO_ListSNK, 0, sizeof(PORT0_PDO_ListSNK));
+          for (index_pdo = 0, index_gui = 0; index_gui < size; index_pdo++)
+          {
+            pdo = LE32(&value[index_gui]);
+            PORT0_PDO_ListSNK[index_pdo] = pdo;
+            index_gui = index_gui + 4;
+          }
+          USBPD_NbPDO[0] = (size / 4);
+          UpdateSNKPowerPort0();
+        }
+#if USBPD_PORT_COUNT==2
+        else
+        {
+          memset(PORT1_PDO_ListSNK, 0, sizeof(PORT1_PDO_ListSNK));
+          for (index_pdo = 0, index_gui = 0; index_gui < size; index_pdo++)
+          {
+            pdo = LE32(&value[index_gui]);
+            PORT1_PDO_ListSNK[index_pdo] = pdo;
+            index_gui = index_gui + 4;
+          }
+          USBPD_NbPDO[2] = (size / 4);
+          UpdateSNKPowerPort1();
+        }
+#endif /* USBPD_PORT_COUNT==2 */
+      }
+      break;
+#endif /* (_SNK) || (_DRP) */
+#if defined(_SRC) || defined(_DRP)
+    case GUI_PARAM_SRC_PDO :
+      {
+        uint32_t index_pdo, index_gui;
+        uint32_t pdo;
+#if USBPD_PORT_COUNT==2
+        if (USBPD_PORT_0 == PortNum)
+#endif /* USBPD_PORT_COUNT==2 */
+        {
+          memset(PORT0_PDO_ListSRC, 0, sizeof(PORT0_PDO_ListSRC));
+          for (index_pdo = 0, index_gui = 0; index_gui < size; index_pdo++)
+          {
+            pdo = LE32(&value[index_gui]);
+            PORT0_PDO_ListSRC[index_pdo] = pdo;
+            index_gui = index_gui + 4;
+          }
+          USBPD_NbPDO[1] = (size / 4);
+        }
+#if USBPD_PORT_COUNT==2
+        else
+        {
+          memset(PORT1_PDO_ListSRC, 0, sizeof(PORT1_PDO_ListSRC));
+          for (index_pdo = 0, index_gui = 0; index_gui < size; index_pdo++)
+          {
+            pdo = LE32(&value[index_gui]);
+            PORT1_PDO_ListSRC[index_pdo] = pdo;
+            index_gui = index_gui + 4;
+          }
+          USBPD_NbPDO[3] = (size / 4);
+        }
+#endif /* USBPD_PORT_COUNT==2 */
+      }
+      break;
+#endif /* (_SRC) || (_DRP) */
+    case GUI_PARAM_TDRP :
+      tdrp = value[0];
+      DPM_USER_Settings[PortNum].CAD_tDRP = tdrp;
+      flag_drp = 1;
+      break;
+    case GUI_PARAM_DCSRC_DRP :
+      dcdrp = value[0];
+      DPM_USER_Settings[PortNum].CAD_dcSRC_DRP = dcdrp;
+      flag_drp = 1;
+      break;
+    case GUI_PARAM_RESPONDS_TO_DISCOV_SOP :
+      DPM_Settings[PortNum].PE_RespondsToDiscovSOP = value[0];
+      break;
+    case GUI_PARAM_ATTEMPTS_DISCOV_SOP :
+      DPM_Settings[PortNum].PE_AttemptsDiscovSOP = value[0];
+      break;
+    case GUI_PARAM_XID_SOP :
+      DPM_ID_Settings[PortNum].XID       = LE32(&value[0]);
+      break;
+    case GUI_PARAM_USB_VID_SOP :
+      DPM_ID_Settings[PortNum].VID       = LE16(&value[0]);
+      break;
+    case GUI_PARAM_PID_SOP :
+      DPM_ID_Settings[PortNum].PID       = LE16(&value[0]);
+      break;
+#if defined(_VDM)
+    case GUI_PARAM_DATA_CAPABLE_AS_USB_HOST_SOP :
+      DPM_VDM_Settings[PortNum].VDM_USBHostSupport    = (USBPD_USBCapa_TypeDef)value[0];
+      break;
+    case GUI_PARAM_DATA_CAPABLE_AS_USB_DEVICE_SOP :
+      DPM_VDM_Settings[PortNum].VDM_USBDeviceSupport  = (USBPD_USBCapa_TypeDef)value[0];
+      break;
+    case GUI_PARAM_PRODUCT_TYPE_SOP :
+      DPM_VDM_Settings[PortNum].VDM_ProductTypeUFPorCP= (USBPD_ProductType_TypeDef)value[0];
+      break;
+    case GUI_PARAM_MODAL_OPERATION_SUPPORTED_SOP :
+      DPM_VDM_Settings[PortNum].VDM_ModalOperation    = (USBPD_ModalOp_TypeDef)value[0];
+      break;
+    case GUI_PARAM_BCDDEVICE_SOP :
+      DPM_VDM_Settings[PortNum].VDM_bcdDevice_SOP     = LE16(&value[0]);
+      break;
+#endif /* _VDM */
+    case GUI_PARAM_MEASUREREPORTING :
+      /* MeasurementReporting */
+      GUI_USER_Params[PortNum].u.MeasurementReporting = value[0];
+      break;
+#if defined(USBPD_REV30_SUPPORT)
+#if _MANU_INFO
+    case GUI_PARAM_MANUINFOPORT_VID :
+      DPM_USER_Settings[PortNum].DPM_ManuInfoPort.VID = LE16(&value[0]);
+      DPM_USER_Settings[PortNum].DPM_ManuInfoPort.PID = LE16(&value[2]);
+      size -= 4;
+      memcpy(DPM_USER_Settings[PortNum].DPM_ManuInfoPort.ManuString, &value[4], size);
+      break;
+#endif /* _MANU_INFO */
+#endif /*USBPD_REV30_SUPPORT*/
+    default :
+      error = GUI_REJ_DPM_REJECT;
+      param_not_applicated[counter_param_not_applicated] = tag;
+      counter_param_not_applicated++;
+      break;
+    }
+  }
+
+#if !defined(USBPDCORE_LIB_NO_PD)
+  /* Updtate CAD_SNKToggleTime & CAD_SRCToggleTime only if TDRP and/or DC_SRC_DRP have been received */
+  if (1 == flag_drp)
+  {
+    uint16_t calcul;
+    if (0 == tdrp)
+    {
+      tdrp = DPM_Settings[PortNum].CAD_SNKToggleTime + DPM_Settings[PortNum].CAD_SRCToggleTime;
+    }
+    if (0 == dcdrp)
+    {
+      dcdrp = (DPM_Settings[PortNum].CAD_SRCToggleTime * 100) / (DPM_Settings[PortNum].CAD_SNKToggleTime + DPM_Settings[PortNum].CAD_SRCToggleTime);
+    }
+    calcul = (tdrp * dcdrp) / 100;
+    DPM_Settings[PortNum].CAD_SRCToggleTime = (uint8_t)calcul;
+    calcul = tdrp * (100 - dcdrp) / 100;
+    DPM_Settings[PortNum].CAD_SNKToggleTime = (uint8_t)calcul;
+  }
+#endif /* !USBPDCORE_LIB_NO_PD */
+
+  /* Only applies if an error was specified. Will send a DPM_CONFIG_REJ instead of DPM_CONFIG_SET_CNF*/
+  if(error != 0xFF)
+  {
+    TLV_deinit_encode(&send_tlv);
+    TLV_init_encode(&send_tlv, __GUI_SET_TAG_ID((PortNum + 1), DPM_CONFIG_REJ), TLV_SIZE_MAX, pEncodedMsg);
+    TLV_addValue(&send_tlv, &error, 1);
+
+    /* If the cause of error is DPM_REJECT, we have to list the tag of parameters which didn't pass */
+    if(!error)
+    {
+      uint32_t index;
+      for(index = 0; index < counter_param_not_applicated; index++)
+      {
+        TLV_addValue(&send_tlv, ¶m_not_applicated[index], 1);
+      }
+    }
+    TLV_deinit_encode(&send_tlv);
+  }
+}
+
+static void Send_DpmConfigGetCnf(uint8_t PortNum, uint8_t* instruction, uint8_t *pEncodedMsg)
+{
+  TLV_ToSend_Data send_tlv;
+  TLV_init_encode(&send_tlv, __GUI_SET_TAG_ID((PortNum + 1), DPM_CONFIG_GET_CNF), TLV_SIZE_MAX, pEncodedMsg);
+  uint16_t length = TLV_get_string_length(instruction) - TLV_HEADER_SIZE;
+  uint8_t index = 0;
+  uint8_t param;
+
+  /* This is a state machine. */
+  do
+  {
+    /* If there is no parameters, we go through each case of the state machine in one pass. (conditionnal breaks) */
+    if(0 == length)
+    {
+      param = GUI_PARAM_ALL;
+    }
+    else
+    {
+      /* If there are, we loop the state machine and go through one case each time. */
+      param = instruction[TLV_VALUE_POSITION + index];
+    }
+
+    /*
+    Each case should simply use the TLV_add function to insert his corresponding data,
+    as suggested in comment. Manual cast to (uint8_t *) may be required.
+    */
+    switch((USBPD_GUI_Tag_Param)param)
+    {
+    case GUI_PARAM_ALL :
+#if !defined(USBPDCORE_LIB_NO_PD)
+    case GUI_PARAM_SOP :
+      {
+        /* SOP & SOP1 & SOP2 */
+        /* SOP1_Debug & SOP2_Debug not implemented */
+        uint8_t settings = DPM_Settings[PortNum].PE_SupportedSOP;
+        TLV_add(&send_tlv, GUI_PARAM_SOP, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#if defined(USBPD_REV30_SUPPORT)
+    case GUI_PARAM_FASTROLESWAP :
+      {
+        /*FastRoleSwap*/
+        uint8_t settings = DPM_Settings[PortNum].PE_PD3_Support.d.PE_FastRoleSwapSupport;
+        TLV_add(&send_tlv, GUI_PARAM_FASTROLESWAP, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#endif /*USBPD_REV30_SUPPORT*/
+#endif /* !USBPDCORE_LIB_NO_PD */
+    case GUI_PARAM_DATAROLESWAP_TO_UFP :
+      {
+        /* DataRoleSwap to UFP */
+        uint8_t settings = DPM_USER_Settings[PortNum].PE_DR_Swap_To_UFP;
+        TLV_add(&send_tlv, GUI_PARAM_DATAROLESWAP_TO_UFP, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+    case GUI_PARAM_DATAROLESWAP_TO_DFP :
+      {
+        /* DataRoleSwap to DFP */
+        uint8_t settings = DPM_USER_Settings[PortNum].PE_DR_Swap_To_DFP;
+        TLV_add(&send_tlv, GUI_PARAM_DATAROLESWAP_TO_DFP, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+    case GUI_PARAM_DEFAULTPOWERROLE :
+      {
+        /*DefaultPowerRole*/
+        uint8_t settings = DPM_Settings[PortNum].PE_DefaultRole;
+        TLV_add(&send_tlv, GUI_PARAM_DEFAULTPOWERROLE, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#if !defined(USBPDCORE_LIB_NO_PD)
+    case GUI_PARAM_DRP_SUPPORT :
+      {
+        /*DRP_Support*/
+        uint8_t settings = DPM_Settings[PortNum].PE_RoleSwap;
+        TLV_add(&send_tlv, GUI_PARAM_DRP_SUPPORT, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+    case GUI_PARAM_CADROLETOGGLE :
+      {
+        /*CADRoleToggle*/
+        uint8_t settings = DPM_Settings[PortNum].CAD_RoleToggle;
+        TLV_add(&send_tlv, GUI_PARAM_CADROLETOGGLE, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+    case GUI_PARAM_PE_SCAP_HR :
+      {
+        /*PE_SCAP_HR*/
+        uint8_t settings = DPM_Settings[PortNum].PE_CapscounterSupport;
+        TLV_add(&send_tlv, GUI_PARAM_PE_SCAP_HR,  1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#if defined(_VDM)
+    case GUI_PARAM_VDM_SUPPORT :
+      {
+        /* DRP Support */
+        uint8_t settings = DPM_Settings[PortNum].PE_VDMSupport;
+        TLV_add(&send_tlv, GUI_PARAM_VDM_SUPPORT, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#endif /*_VDM*/
+    case GUI_PARAM_PING_SUPPORT :
+      {
+        /* Ping Support */
+        uint8_t settings = DPM_Settings[PortNum].PE_PingSupport;
+        TLV_add(&send_tlv, GUI_PARAM_PING_SUPPORT, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#if defined(USBPD_REV30_SUPPORT)
+    case GUI_PARAM_PPS_SUPPORT :
+      {
+        /* PD3 Support */
+        uint16_t settings = DPM_Settings[PortNum].PE_PD3_Support.PD3_Support;
+        TLV_add(&send_tlv, GUI_PARAM_PPS_SUPPORT, 2, (uint8_t*)&settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#endif /*USBPD_REV30_SUPPORT*/
+#endif /* !USBPDCORE_LIB_NO_PD */
+    case GUI_PARAM_VCONNSWAP :
+      {
+        /*VConnSwap*/
+        uint8_t settings = DPM_USER_Settings[PortNum].PE_VconnSwap;
+        TLV_add(&send_tlv, GUI_PARAM_VCONNSWAP, 1, &settings);
+        if(0 != length)
+        {
+          break;
+        }
+      }
+#if defined(_SNK) || defined(_DRP)
+    case GUI_PARAM_SNK_PDO :
+      {
+        uint8_t* list_pdo;
+        uint8_t nb_pdo;
+#if USBPD_PORT_COUNT==2
+        if (USBPD_PORT_0 == PortNum)
+#endif /* USBPD_PORT_COUNT==2 */
+        {
+          nb_pdo    =  USBPD_NbPDO[0];
+          list_pdo  = (uint8_t*)PORT0_PDO_ListSNK;
+        }
+#if USBPD_PORT_COUNT==2
+        else
+        {
+          nb_pdo    =  USBPD_NbPDO[2];
+          list_pdo  = (uint8_t*)PORT1_PDO_ListSNK;
+        }
+#endif /* USBPD_PORT_COUNT==2 */
+        TLV_add(&send_tlv, GUI_PARAM_SNK_PDO, nb_pdo * 4, list_pdo);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#endif /* _SNK || _DRP */
+#if defined(_SRC) || defined(_DRP)
+    case GUI_PARAM_SRC_PDO :
+      {
+        uint8_t* list_pdo;
+        uint8_t nb_pdo;
+#if USBPD_PORT_COUNT==2
+        if (USBPD_PORT_0 == PortNum)
+#endif /* USBPD_PORT_COUNT==2 */
+        {
+          nb_pdo    =  USBPD_NbPDO[1];
+          list_pdo  = (uint8_t*)PORT0_PDO_ListSRC;
+        }
+#if USBPD_PORT_COUNT==2
+        else
+        {
+          nb_pdo    =  USBPD_NbPDO[3];
+          list_pdo  = (uint8_t*)PORT1_PDO_ListSRC;
+        }
+#endif /* USBPD_PORT_COUNT==2 */
+        TLV_add(&send_tlv, GUI_PARAM_SRC_PDO, nb_pdo * 4, list_pdo);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#endif /* _SRC || _DRP */
+    case GUI_PARAM_TDRP :
+      {
+        /* Calculate the current value of tDRP (value between 50ms and 100ms) */
+        uint8_t value = DPM_USER_Settings[PortNum].CAD_tDRP;
+        TLV_add(&send_tlv, GUI_PARAM_TDRP, 1, &value);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_DCSRC_DRP :
+      {
+        /* Calculate the current value of tDRP (value between 50ms and 100ms) */
+        uint8_t value = DPM_USER_Settings[PortNum].CAD_dcSRC_DRP;
+        TLV_add(&send_tlv, GUI_PARAM_DCSRC_DRP, 1, &value);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#if !defined(USBPDCORE_LIB_NO_PD)
+    case GUI_PARAM_RESPONDS_TO_DISCOV_SOP :
+      {
+        uint8_t settings = DPM_Settings[PortNum].PE_RespondsToDiscovSOP;
+        TLV_add(&send_tlv, GUI_PARAM_RESPONDS_TO_DISCOV_SOP, 1, &settings);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_ATTEMPTS_DISCOV_SOP :
+      {
+        uint8_t settings = DPM_Settings[PortNum].PE_AttemptsDiscovSOP;
+        TLV_add(&send_tlv, GUI_PARAM_ATTEMPTS_DISCOV_SOP, 1, &settings);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#endif /* !USBPDCORE_LIB_NO_PD */
+    case GUI_PARAM_XID_SOP :
+      {
+        uint32_t value = DPM_ID_Settings[PortNum].XID;
+        TLV_add(&send_tlv, GUI_PARAM_XID_SOP, 4, (uint8_t*)&value);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_USB_VID_SOP :
+      {
+        uint16_t value = DPM_ID_Settings[PortNum].VID;
+        TLV_add(&send_tlv, GUI_PARAM_USB_VID_SOP, 2, (uint8_t*)&value);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_PID_SOP :
+      {
+        uint16_t value = DPM_ID_Settings[PortNum].PID;
+        TLV_add(&send_tlv, GUI_PARAM_PID_SOP, 2, (uint8_t*)&value);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#if defined(_VDM)
+    case GUI_PARAM_DATA_CAPABLE_AS_USB_HOST_SOP :
+      {
+        uint8_t settings = DPM_VDM_Settings[PortNum].VDM_USBHostSupport;
+        TLV_add(&send_tlv, GUI_PARAM_DATA_CAPABLE_AS_USB_HOST_SOP, 1, &settings);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_DATA_CAPABLE_AS_USB_DEVICE_SOP :
+      {
+        uint8_t settings = DPM_VDM_Settings[PortNum].VDM_USBDeviceSupport;
+        TLV_add(&send_tlv, GUI_PARAM_DATA_CAPABLE_AS_USB_DEVICE_SOP, 1, &settings);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_PRODUCT_TYPE_SOP :
+      {
+        uint8_t settings = DPM_VDM_Settings[PortNum].VDM_ProductTypeUFPorCP;
+        TLV_add(&send_tlv, GUI_PARAM_PRODUCT_TYPE_SOP, 1, &settings);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_MODAL_OPERATION_SUPPORTED_SOP :
+      {
+        uint8_t settings = DPM_VDM_Settings[PortNum].VDM_ModalOperation;
+        TLV_add(&send_tlv, GUI_PARAM_MODAL_OPERATION_SUPPORTED_SOP, 1, &settings);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+    case GUI_PARAM_BCDDEVICE_SOP :
+      {
+        uint16_t value = DPM_VDM_Settings[PortNum].VDM_bcdDevice_SOP;
+        TLV_add(&send_tlv, GUI_PARAM_BCDDEVICE_SOP, 2, (uint8_t*)&value);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#endif /* _VDM */
+    case GUI_PARAM_MEASUREREPORTING :
+      {
+        uint8_t settings = GUI_USER_Params[PortNum].u.MeasurementReporting;
+        TLV_add(&send_tlv, GUI_PARAM_MEASUREREPORTING, 1, &settings);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#if defined(USBPD_REV30_SUPPORT)
+#if _MANU_INFO
+    case GUI_PARAM_MANUINFOPORT_VID :
+      {
+        uint8_t size = sizeof(DPM_USER_Settings[PortNum].DPM_ManuInfoPort.ManuString) + 4;
+        TLV_add(&send_tlv, GUI_PARAM_MANUINFOPORT_VID, size, (uint8_t*)&DPM_USER_Settings[PortNum].DPM_ManuInfoPort);
+      }
+      if(0 != length)
+      {
+        break;
+      }
+#endif /* _MANU_INFO */
+#endif /*USBPD_REV30_SUPPORT*/
+    default:
+      if(0 != length)
+      {
+        /* At least 1 parameter does not exist */
+        TLV_deinit_encode(&send_tlv);
+        Send_DpmConfigGetRej(PortNum, pEncodedMsg, GUI_REJ_DPM_INVALID_MESSAGE);
+        goto __end;
+      }
+      break;
+    }
+    index++;
+    /*
+    Loop until we haven't processed each specified parameter.
+    If there weren't any (length = 0), we exit the loop after one execution.
+    */
+  } while(index < length);
+
+__end:
+  TLV_deinit_encode(&send_tlv);
+}
+
+static void Send_DpmConfigGetRej(uint8_t PortNum, uint8_t *pEncodedMsg, USBPD_GUI_Reject_Reason RejectReason)
+{
+  TLV_ToSend_Data send_tlv;
+  TLV_init_encode(&send_tlv, DPM_CONFIG_REJ, TLV_SIZE_MAX, pEncodedMsg);
+  TLV_add(&send_tlv, RejectReason, 0, NULL);
+  TLV_deinit_encode(&send_tlv);
+}
+
+static void Send_DpmMessageRej(uint8_t PortNum, uint8_t *pEncodedMsg, USBPD_GUI_Reject_Reason RejectReason)
+{
+  TLV_ToSend_Data send_tlv;
+  TLV_init_encode(&send_tlv, DPM_MESSAGE_REJ, TLV_SIZE_MAX, pEncodedMsg);
+  TLV_add(&send_tlv, RejectReason, 0, NULL);
+  TLV_deinit_encode(&send_tlv);
+}
+
+static void Send_DpmRegisterReadCnf(uint8_t PortNum, uint8_t *pEncodedMsg, uint8_t param)
+{
+  TLV_ToSend_Data ToSendTLV;
+  TLV_init_encode(&ToSendTLV, __GUI_SET_TAG_ID((PortNum +1), DPM_REGISTER_READ_CNF), TLV_SIZE_MAX, pEncodedMsg);
+
+  uint8_t stateMachineArray[GUI_REG_NUMBER_OF_REGISTERS] = {
+    GUI_REG_VENDOR_ID, GUI_REG_PRODUCT_ID, GUI_REG_DEVICE_ID, GUI_REG_USBTYPEC_REV,
+    GUI_REG_USBPD_REV_VER, GUI_REG_USBPD_INTERFACE_REV, GUI_REG_ALERT, GUI_REG_ALERT_MASK,
+    GUI_REG_POWER_STATUS_MASK, GUI_REG_FAULT_STATUS_MASK, GUI_REG_CONFIG_STANDARD_OUTPUT,
+    GUI_REG_TCPC_CONTROL, GUI_REG_ROLE_CONTROL, GUI_REG_FAULT_CONTROL, GUI_REG_POWER_CONTROL,
+    GUI_REG_CC_STATUS, GUI_REG_POWER_STATUS, GUI_REG_FAULT_STATUS, GUI_REG_COMMAND, GUI_REG_DECIVE_CAP1,
+    GUI_REG_DECIVE_CAP2, GUI_REG_STD_INPUT_CAP, GUI_REG_STD_OUTPUT_CAP, GUI_REG_MSG_HEADER_INFO,
+    GUI_REG_RX_DETECT, GUI_REG_RX_BYTE_COUNT, GUI_REG_RX_BUFFER_FRAME_TYPE, GUI_REG_RX_HEADER,
+    GUI_REG_RX_DATA, GUI_REG_TRANSMIT, GUI_REG_TX_BYTE_COUNT, GUI_REG_TX_HEADER, GUI_REG_TX_DATA,
+    GUI_REG_VBUS_VOLTAGE, GUI_REG_VBUS_SINK_DISCONNECT_THRESHOLD, GUI_REG_VBUS_STOP_DISCHARGE_THRESHOLD,
+    GUI_REG_VBUS_VOLTAGE_ALARM_HI_CFG, GUI_REG_VBUS_VOLTAGE_ALARM_LO_CFG, GUI_REG_VENDOR_DATA
+  };
+  uint8_t counter = 0;
+
+  /*  If param is not at 0xFF, then it means we only want one parameter.
+      We then have to get out of the state machine after the first state */
+  if(param != 0xFF)
+  {
+    *stateMachineArray = param;
+  }
+
+  do
+  {
+    switch(stateMachineArray[counter])
+      /*
+        In each case, the register needs to be read. Inclusion in the TLV which
+        is going to be sent has to be done with TLV_add().
+      */
+    {
+      case GUI_REG_VENDOR_ID :
+
+              break;
+      case GUI_REG_PRODUCT_ID :
+
+              break;
+      case GUI_REG_DEVICE_ID :
+
+              break;
+      case GUI_REG_USBTYPEC_REV :
+
+              break;
+      case GUI_REG_USBPD_REV_VER :
+
+              break;
+      case GUI_REG_USBPD_INTERFACE_REV :
+
+              break;
+      case GUI_REG_ALERT :
+
+              break;
+      case GUI_REG_ALERT_MASK :
+
+              break;
+      case GUI_REG_POWER_STATUS_MASK :
+
+              break;
+      case GUI_REG_FAULT_STATUS_MASK :
+
+              break;
+      case GUI_REG_CONFIG_STANDARD_OUTPUT :
+
+              break;
+      case GUI_REG_TCPC_CONTROL :
+
+              break;
+      case GUI_REG_ROLE_CONTROL :
+
+              break;
+      case GUI_REG_FAULT_CONTROL :
+
+              break;
+      case GUI_REG_POWER_CONTROL :
+
+              break;
+      case GUI_REG_CC_STATUS :
+
+              break;
+      case GUI_REG_POWER_STATUS :
+
+              break;
+      case GUI_REG_FAULT_STATUS :
+
+              break;
+      case GUI_REG_COMMAND :
+
+              break;
+      case GUI_REG_DECIVE_CAP1 :
+
+              break;
+      case GUI_REG_DECIVE_CAP2 :
+
+              break;
+      case GUI_REG_STD_INPUT_CAP :
+
+              break;
+      case GUI_REG_STD_OUTPUT_CAP :
+
+              break;
+      case GUI_REG_MSG_HEADER_INFO :
+
+              break;
+      case GUI_REG_RX_DETECT :
+
+              break;
+      case GUI_REG_RX_BYTE_COUNT :
+
+              break;
+      case GUI_REG_RX_BUFFER_FRAME_TYPE :
+
+              break;
+      case GUI_REG_RX_HEADER :
+
+              break;
+      case GUI_REG_RX_DATA :
+
+              break;
+      case GUI_REG_TRANSMIT :
+
+              break;
+      case GUI_REG_TX_BYTE_COUNT :
+
+              break;
+      case GUI_REG_TX_HEADER :
+
+              break;
+      case GUI_REG_TX_DATA :
+
+              break;
+      case GUI_REG_VBUS_VOLTAGE :
+
+              break;
+      case GUI_REG_VBUS_SINK_DISCONNECT_THRESHOLD :
+
+              break;
+      case GUI_REG_VBUS_STOP_DISCHARGE_THRESHOLD :
+
+              break;
+      case GUI_REG_VBUS_VOLTAGE_ALARM_HI_CFG :
+
+              break;
+      case GUI_REG_VBUS_VOLTAGE_ALARM_LO_CFG :
+
+              break;
+      case GUI_REG_VENDOR_DATA :
+
+              break;
+      default :
+              break;
+    }
+    counter++;
+  } while(counter < GUI_REG_NUMBER_OF_REGISTERS && param != 0xFF);
+
+  TLV_deinit_encode(&ToSendTLV);
+}
+
+static void Send_DpmRegisterWriteCnf(uint8_t PortNum, uint8_t *pEncodedMsg, uint8_t *toProcess)
+{
+  TLV_Received_Data ToProcessTLV;
+  TLV_init_decode(&ToProcessTLV, toProcess);
+
+  uint8_t registerName;
+  uint16_t registerSize;
+  uint8_t *registerValue;
+
+  TLV_get(&ToProcessTLV, ®isterName, ®isterSize, ®isterValue);
+
+  switch(registerName)
+    /*
+      Each case should write the data pointed by registerValue in the appropriate register,
+      while taking into account the size of the data with registerSize.
+    */
+  {
+      case GUI_REG_VENDOR_ID :
+
+              break;
+      case GUI_REG_PRODUCT_ID :
+
+              break;
+      case GUI_REG_DEVICE_ID :
+
+              break;
+      case GUI_REG_USBTYPEC_REV :
+
+              break;
+      case GUI_REG_USBPD_REV_VER :
+
+              break;
+      case GUI_REG_USBPD_INTERFACE_REV :
+
+              break;
+      case GUI_REG_ALERT :
+
+              break;
+      case GUI_REG_ALERT_MASK :
+
+              break;
+      case GUI_REG_POWER_STATUS_MASK :
+
+              break;
+      case GUI_REG_FAULT_STATUS_MASK :
+
+              break;
+      case GUI_REG_CONFIG_STANDARD_OUTPUT :
+
+              break;
+      case GUI_REG_TCPC_CONTROL :
+
+              break;
+      case GUI_REG_ROLE_CONTROL :
+
+              break;
+      case GUI_REG_FAULT_CONTROL :
+
+              break;
+      case GUI_REG_POWER_CONTROL :
+
+              break;
+      case GUI_REG_CC_STATUS :
+
+              break;
+      case GUI_REG_POWER_STATUS :
+
+              break;
+      case GUI_REG_FAULT_STATUS :
+
+              break;
+      case GUI_REG_COMMAND :
+
+              break;
+      case GUI_REG_DECIVE_CAP1 :
+
+              break;
+      case GUI_REG_DECIVE_CAP2 :
+
+              break;
+      case GUI_REG_STD_INPUT_CAP :
+
+              break;
+      case GUI_REG_STD_OUTPUT_CAP :
+
+              break;
+      case GUI_REG_MSG_HEADER_INFO :
+
+              break;
+      case GUI_REG_RX_DETECT :
+
+              break;
+      case GUI_REG_RX_BYTE_COUNT :
+
+              break;
+      case GUI_REG_RX_BUFFER_FRAME_TYPE :
+
+              break;
+      case GUI_REG_RX_HEADER :
+
+              break;
+      case GUI_REG_RX_DATA :
+
+              break;
+      case GUI_REG_TRANSMIT :
+
+              break;
+      case GUI_REG_TX_BYTE_COUNT :
+
+              break;
+      case GUI_REG_TX_HEADER :
+
+              break;
+      case GUI_REG_TX_DATA :
+
+              break;
+      case GUI_REG_VBUS_VOLTAGE :
+
+              break;
+      case GUI_REG_VBUS_SINK_DISCONNECT_THRESHOLD :
+
+              break;
+      case GUI_REG_VBUS_STOP_DISCHARGE_THRESHOLD :
+
+              break;
+      case GUI_REG_VBUS_VOLTAGE_ALARM_HI_CFG :
+
+              break;
+      case GUI_REG_VBUS_VOLTAGE_ALARM_LO_CFG :
+
+              break;
+      case GUI_REG_VENDOR_DATA :
+
+              break;
+      default :
+              break;
+  }
+  TLV_deinit_decode(&ToProcessTLV);
+
+  TLV_ToSend_Data ToSendTLV;
+  /* Generation of the empty response, as it should be done*/
+  TLV_init_encode(&ToSendTLV, __GUI_SET_TAG_ID((PortNum + 1), DPM_REGISTER_WRITE_CNF), 12, pEncodedMsg);
+  TLV_deinit_encode(&ToSendTLV);
+}
+
+/**
+  * @brief  Manage Free text sent by the GUI
+  * @param  PortNum     The current port number
+  * @param  pPayload    Pointer of the text to manage
+  * @param  Size        Size of the text
+  * @retval USBPD Status
+  */
+static USBPD_StatusTypeDef Manage_FreeText(uint8_t PortNum, uint8_t *pPayload, uint16_t Size)
+{
+  USBPD_StatusTypeDef _status = USBPD_FAIL;
+
+  if (NULL != pCB_FreeText)
+  {
+    pCB_FreeText(PortNum, pPayload, Size);
+    _status = USBPD_OK;
+  }
+
+  return _status;
+}
+
+#if defined(_SNK) || defined(_DRP)
+/**
+  * @brief  Function to update SNK PDO and power user settings on Port0
+  * @retval None
+  */
+static void UpdateSNKPowerPort0(void)
+{
+  USBPD_PDO_TypeDef pdo;
+  uint32_t _max_power = 0;
+  uint16_t _voltage = 0, _current = 0, _power = 0;
+  uint16_t _min_voltage = 0xFFFF, _max_voltage = 0, _max_current = 0;
+
+  for (uint32_t _index = 0; _index < USBPD_NbPDO[0]; _index++)
+  {
+    pdo.d32 = PORT0_PDO_ListSNK[_index];
+    switch (pdo.GenericPDO.PowerObject)
+    {
+      case USBPD_CORE_PDO_TYPE_FIXED:    /*!< Fixed Supply PDO                             */
+        _voltage = GUI_DECODE_50MV(pdo.SNKFixedPDO.VoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _current = GUI_DECODE_10MA(pdo.SNKFixedPDO.OperationalCurrentIn10mAunits);
+        GUI_UPDATE_CURRENT_MAX(_current, _max_current);
+        break;
+      case USBPD_CORE_PDO_TYPE_BATTERY:  /*!< Battery Supply PDO                           */
+        _voltage = GUI_DECODE_50MV(pdo.SNKBatteryPDO.MinVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        _voltage = GUI_DECODE_50MV(pdo.SNKBatteryPDO.MaxVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _power = GUI_DECODE_MW(pdo.SNKBatteryPDO.OperationalPowerIn250mWunits);
+        GUI_UPDATE_POWER_MAX(_power, _max_power);
+        break;
+      case USBPD_CORE_PDO_TYPE_VARIABLE: /*!< Variable Supply (non-battery) PDO            */
+        _voltage = GUI_DECODE_50MV(pdo.SNKVariablePDO.MinVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        _voltage = GUI_DECODE_50MV(pdo.SNKVariablePDO.MaxVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _current = GUI_DECODE_10MA(pdo.SNKVariablePDO.OperationalCurrentIn10mAunits);
+        GUI_UPDATE_CURRENT_MAX(_current, _max_current);
+        break;
+#if _PPS
+      case USBPD_CORE_PDO_TYPE_APDO:     /*!< Augmented Power Data Object (APDO)           */
+        _voltage = GUI_DECODE_100MV(pdo.SRCSNKAPDO.MinVoltageIn100mV);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        _voltage = GUI_DECODE_100MV(pdo.SRCSNKAPDO.MaxVoltageIn100mV);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _current = GUI_DECODE_50MA(pdo.SRCSNKAPDO.MaxCurrentIn50mAunits);
+        GUI_UPDATE_CURRENT_MAX(_current, _max_current);
+        break;
+#endif /*_USBPD_REV30_SUPPORT && PPS*/
+      default:
+        break;
+    }
+  }
+
+  GUI_CHECK_VOLTAGE_MIN(_min_voltage, DPM_USER_Settings[USBPD_PORT_0].DPM_SNKRequestedPower.MinOperatingVoltageInmVunits);
+  GUI_CHECK_VOLTAGE_MAX(_max_voltage, DPM_USER_Settings[USBPD_PORT_0].DPM_SNKRequestedPower.MaxOperatingVoltageInmVunits);
+  GUI_CHECK_CURRENT_MAX(_max_current, DPM_USER_Settings[USBPD_PORT_0].DPM_SNKRequestedPower.MaxOperatingCurrentInmAunits);
+  _max_power = (_max_voltage * _max_current) / 1000;
+  GUI_CHECK_POWER_MAX(_max_power, DPM_USER_Settings[USBPD_PORT_0].DPM_SNKRequestedPower.MaxOperatingPowerInmWunits);
+}
+
+#if USBPD_PORT_COUNT==2
+/**
+  * @brief  Function to update SNK PDO and power user settings on Port1
+  * @retval None
+  */
+static void UpdateSNKPowerPort1(void)
+{
+  USBPD_PDO_TypeDef pdo;
+  uint32_t _max_power = 0;
+  uint16_t _voltage = 0, _current = 0, _power = 0;
+  uint16_t _min_voltage = 0xFFFF, _max_voltage = 0, _max_current = 0;
+
+  for (uint32_t _index = 0; _index < USBPD_NbPDO[2]; _index++)
+  {
+    pdo.d32 = PORT1_PDO_ListSNK[_index];
+    switch (pdo.GenericPDO.PowerObject)
+    {
+      case USBPD_CORE_PDO_TYPE_FIXED:    /*!< Fixed Supply PDO                             */
+        _voltage = GUI_DECODE_50MV(pdo.SNKFixedPDO.VoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _current = GUI_DECODE_10MA(pdo.SNKFixedPDO.OperationalCurrentIn10mAunits);
+        GUI_UPDATE_CURRENT_MAX(_current, _max_current);
+        break;
+      case USBPD_CORE_PDO_TYPE_BATTERY:  /*!< Battery Supply PDO                           */
+        _voltage = GUI_DECODE_50MV(pdo.SNKBatteryPDO.MinVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        _voltage = GUI_DECODE_50MV(pdo.SNKBatteryPDO.MaxVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _power = GUI_DECODE_MW(pdo.SNKBatteryPDO.OperationalPowerIn250mWunits);
+        GUI_UPDATE_POWER_MAX(_power, _max_power);
+        break;
+      case USBPD_CORE_PDO_TYPE_VARIABLE: /*!< Variable Supply (non-battery) PDO            */
+        _voltage = GUI_DECODE_50MV(pdo.SNKVariablePDO.MinVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        _voltage = GUI_DECODE_50MV(pdo.SNKVariablePDO.MaxVoltageIn50mVunits);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _current = GUI_DECODE_10MA(pdo.SNKVariablePDO.OperationalCurrentIn10mAunits);
+        GUI_UPDATE_CURRENT_MAX(_current, _max_current);
+        break;
+#if _PPS
+      case USBPD_CORE_PDO_TYPE_APDO:     /*!< Augmented Power Data Object (APDO)           */
+        _voltage = GUI_DECODE_100MV(pdo.SRCSNKAPDO.MinVoltageIn100mV);
+        GUI_UPDATE_VOLTAGE_MIN(_voltage, _min_voltage);
+        _voltage = GUI_DECODE_100MV(pdo.SRCSNKAPDO.MaxVoltageIn100mV);
+        GUI_UPDATE_VOLTAGE_MAX(_voltage, _max_voltage);
+        _current = GUI_DECODE_50MA(pdo.SRCSNKAPDO.MaxCurrentIn50mAunits);
+        GUI_UPDATE_CURRENT_MAX(_current, _max_current);
+        break;
+#endif /*_USBPD_REV30_SUPPORT && PPS*/
+      default:
+        break;
+    }
+  }
+
+  GUI_CHECK_VOLTAGE_MIN(_min_voltage, DPM_USER_Settings[USBPD_PORT_1].DPM_SNKRequestedPower.MinOperatingVoltageInmVunits);
+  GUI_CHECK_VOLTAGE_MAX(_max_voltage, DPM_USER_Settings[USBPD_PORT_1].DPM_SNKRequestedPower.MaxOperatingVoltageInmVunits);
+  GUI_CHECK_CURRENT_MAX(_max_current, DPM_USER_Settings[USBPD_PORT_1].DPM_SNKRequestedPower.MaxOperatingCurrentInmAunits);
+  _max_power = (_max_voltage * _max_current) / 1000;
+  GUI_CHECK_POWER_MAX(_max_power, DPM_USER_Settings[USBPD_PORT_1].DPM_SNKRequestedPower.MaxOperatingPowerInmWunits);
+}
+#endif /* USBPD_PORT_COUNT==2 */
+#endif /* _SNK) || _DRP */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* _GUI_INTERFACE */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/gui_api.h b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/gui_api.h
new file mode 100644
index 0000000..a9ec457
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/gui_api.h
@@ -0,0 +1,256 @@
+/**
+  ******************************************************************************
+  * @file    gui_api.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for GUI
+  *          interface.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef _GUI_API_H
+#define _GUI_API_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "usbpd_def.h"
+
+/** @addtogroup STM32_USBPD_LIBRARY
+  * @{
+  */
+
+/** @addtogroup USBPD_GUI_API
+  * @{
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USBPD_GUI_API_Exported_Defines USBPD GUI API exported Defines
+  * @{
+  */
+#define GUI_PE_PORT_NUM_Pos             (24u)
+#define GUI_PE_PORT_NUM_Msk             (0x3u << GUI_PE_PORT_NUM_Pos)
+#define GUI_PE_PORT_NUM_0               (0x0u << GUI_PE_PORT_NUM_Pos)
+#define GUI_PE_PORT_NUM_1               (0x1u << GUI_PE_PORT_NUM_Pos)
+#define GUI_PE_NOTIF_Pos                (4u)
+#define GUI_PE_NOTIF_Msk                (0xFFu << GUI_PE_NOTIF_Pos)
+
+#define GUI_NOTIF_MEASUREMENT           (USBPD_NOTIFY_ALL + 1)
+#define GUI_NOTIF_MEASUREMENT_STEP      40u
+
+/**
+  * @brief  USB PD GUI STATE MACHINE STATE
+  */
+typedef enum
+{
+  GUI_STATE_INIT,     /*!< GUI init state */
+  GUI_STATE_RUNNING,  /*!< GUI running state */
+  GUI_STATE_RESET,    /*!< GUI reset state */
+} USBPD_GUI_State;
+
+/**
+  * @brief  USB PD GUI TAG TYPE
+  */
+typedef enum
+{
+  DPM_RESET_REQ            = 0x01,
+  DPM_INIT_REQ             = 0x02,
+  DPM_INIT_CNF             = 0x03,
+  DPM_CONFIG_GET_REQ       = 0x04,
+  DPM_CONFIG_GET_CNF       = 0x05,
+  DPM_CONFIG_SET_REQ       = 0x06,
+  DPM_CONFIG_SET_CNF       = 0x07,
+  DPM_CONFIG_REJ           = 0x08,
+  DPM_MESSAGE_REQ          = 0x09,
+  DPM_MESSAGE_CNF          = 0x0A,
+  DPM_MESSAGE_REJ          = 0x0B,
+  DPM_MESSAGE_IND          = 0x0C,
+  DPM_MESSAGE_RSP          = 0x0D,
+  DPM_REGISTER_READ_REQ    = 0x0E,
+  DPM_REGISTER_READ_CNF    = 0x0F,
+  DPM_REGISTER_WRITE_REQ   = 0x10,
+  DPM_REGISTER_WRITE_CNF   = 0x11,
+  DEBUG_STACK_MESSAGE      = 0x12,
+} USBPD_GUI_Tag_TypeDef;
+
+/** @defgroup USBPD_CORE_GUI_TYPE_NOTIFICATION USBPD CORE TRACE  TYPE NOTIFICATION
+  * @{
+  */
+#define  GUI_NOTIF_NUMBEROFRCVSNKPDO                    (1 << 0)
+#define  GUI_NOTIF_RDOPOSITION                          (1 << 1)
+#define  GUI_NOTIF_LISTOFRCVSRCPDO                      (1 << 2)
+#define  GUI_NOTIF_NUMBEROFRCVSRCPDO                    (1 << 3)
+#define  GUI_NOTIF_LISTOFRCVSNKPDO                      (1 << 4)
+#define  GUI_NOTIF_ISCONNECTED                          (1 << 5)
+#define  GUI_NOTIF_DATAROLE                             (1 << 6)
+#define  GUI_NOTIF_POWERROLE                            (1 << 7)
+#define  GUI_NOTIF_CCDEFAULTCURRENTADVERTISED           (1 << 8)
+#define  GUI_NOTIF_VCONNON                              (1 << 9)
+#define  GUI_NOTIF_VCONNSWAPED                          (1 << 10)
+#define  GUI_NOTIF_MEASUREREPORTING                     (1 << 11)
+#define  GUI_NOTIF_CC                                   (1 << 12)
+#define  GUI_NOTIF_PE_EVENT                             (1 << 13)
+#define  GUI_NOTIF_TIMESTAMP                            (1 << 14)
+#define  GUI_NOTIF_POWER_EVENT                          (1 << 15)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USBPD_GUI_API_Exported_TypeDef USBPD GUI API exported TypeDef
+  * @{
+  */
+
+typedef struct
+{
+  uint16_t VBUS_Level               :16;  /*!< VBUS Level */
+  uint16_t IBUS_Level               :16;  /*!< IBUS Level */
+  /* Measurement Reporting */
+  union {
+    uint8_t MeasurementReporting;
+    struct {
+      uint8_t MeasReportValue       :7;   /*!< Enable Measure reporting every tr x 40 ms  */
+      uint8_t MeasReportActivation  :1;   /*!< Enable or Disable Measure reporting        */
+    }d;
+  }u;
+  uint8_t Reserved                  :8;   /*!< Reserved bits */
+} GUI_USER_ParamsTypeDef;
+
+typedef struct
+{
+  uint32_t PE_DataSwap                                    : 1;  /*!< support data swap                                     */
+  uint32_t PE_VconnSwap                                   : 1;  /*!< support VCONN swap                                    */
+  uint32_t PE_DR_Swap_To_DFP                              : 1U; /*!< If supported, DR Swap to DFP can be accepted or not by the user else directly rejected */
+  uint32_t PE_DR_Swap_To_UFP                              : 1U; /*!< If supported, DR Swap to UFP can be accepted or not by the user else directly rejected */
+  uint32_t Reserved1                                      : 28U;  /*!< Reserved bits */
+#if defined(_SNK) || defined(_DRP)
+  USBPD_SNKPowerRequest_TypeDef DPM_SNKRequestedPower;          /*!< Requested Power by the sink board                     */
+#else
+  uint32_t            Reserved_ReqPower[6];                       /*!< Reserved bits to match with Resquested power information            */
+#endif /* _SNK || _DRP */
+#if defined(USBPD_REV30_SUPPORT)
+#if _MANU_INFO
+  USBPD_MIDB_TypeDef  DPM_ManuInfoPort;                         /*!< Manufacturer information used for the port            */
+  uint16_t            ReservedManu;                             /*!< Reserved bits to match with Manufacturer information            */
+#else
+  uint32_t            ReservedManu[7];                          /*!< Reserved bits to match with Manufacturer information            */
+#endif /* _MANU_INFO */
+#if _SRC_CAPA_EXT && (defined(_SRC)||defined(_DRP))
+  USBPD_SCEDB_TypeDef DPM_SRCExtendedCapa;                      /*!< SRC Extended Capability                               */
+#else
+  uint32_t            ReservedSrcCapa[6];                       /*!< Reserved bits to match with SrcCapa information            */
+#endif /* _SRC_CAPA_EXT && (_SRC || _DRP) */
+#if defined(_SNK)||defined(_DRP)
+  USBPD_SKEDB_TypeDef DPM_SNKExtendedCapa;                      /*!< SNK Extended Capability                                */
+  uint8_t             ReservedSnkCapa[3];                       /*!< Reserved bits to match with SnkCapaExt information     */
+#else
+  uint32_t            ReservedSnkCapa[6];                       /*!< Reserved bits to match with SnkCapaExt information     */
+#endif /* _SNK || _DRP */
+#else
+  uint32_t            ReservedRev3[13];                         /*!< Reserved bits to match with PD3.0 information            */
+#endif /* USBPD_REV30_SUPPORT */
+  uint32_t PWR_AccessoryDetection                         : 1; /*!< It enables or disables powered accessory detection */
+  uint32_t PWR_AccessoryTransition                        : 1; /*!< It enables or disables transition from Powered.accessory to Try.SNK */
+  USBPD_CORE_PDO_ExtPowered_TypeDef PWR_UnconstrainedPower: 1; /*!< UUT has an external power source available that is sufficient to adequately power the system while charging external devices or the UUT primary function is to charge external devices. */
+  CAD_SNK_Source_Current_Adv_Typedef PWR_RpResistorValue  : 2; /*!< RP resitor value based on @ref CAD_SNK_Source_Current_Adv_Typedef */
+  USBPD_CORE_PDO_USBCommCapable_TypeDef USB_Support       : 1; /*!< USB_Comms_Capable, is the UUT capable of enumerating as a USB host or device? */
+  uint32_t USB_Device                                     : 1; /*!< Type_C_Can_Act_As_Device, Indicates whether the UUT can communicate with USB 2.0 or USB 3.1 as a device or as the Upstream Facing Port of a hub. */
+  uint32_t USB_Host                                       : 1; /*!<  Type_C_Can_Act_As_Host, Indicates whether the UUT can communicate with USB 2.0 or USB 3.1 as a host or as the Downstream Facing Port of a hub */
+  USBPD_CORE_PDO_USBSuspendSupport_TypeDef USB_SuspendSupport: 1; /*!<  USB Suspend support values in PDO definition (Source) */
+  uint32_t CAD_tDRP                                       :7;  /*!< The period that DRP shall complete a Source to Sink and back advertisement */
+  uint32_t CAD_dcSRC_DRP                                  :7;  /*!< The percent of time that a DRP shall advertise Source during tDRP (in %) */
+  uint32_t Reserved2                                      :31;  /*!< reserved bits */
+} USBPD_USER_SettingsTypeDef;
+
+typedef struct
+{
+  uint32_t XID;               /*!< Value provided by the USB-IF assigned to the product   */
+  uint16_t VID;               /*!< Vendor ID (assigned by the USB-IF)                     */
+  uint16_t PID;               /*!< Product ID (assigned by the manufacturer)              */
+} USBPD_IdSettingsTypeDef;
+
+typedef struct
+{
+  uint32_t VDM_XID_SOP                      :32; /*!< A decimal number assigned by USB-IF before certification */
+  uint32_t VDM_USB_VID_SOP                  :16; /*!< A unique 16-bit number, assigned to the Vendor by USB-IF. */
+  uint32_t VDM_PID_SOP                      :16; /*!< A unique number assigned by the Vendor ID holder identifying the product. */
+  uint32_t VDM_bcdDevice_SOP                :16; /*!< A unique number assigned by the Vendor ID holder containing identity information relevant to the release version of the product. */
+  USBPD_ModalOp_TypeDef VDM_ModalOperation  : 1; /*!< Product support Modes based on @ref USBPD_ModalOp_TypeDef */
+  USBPD_USBCapa_TypeDef VDM_USBHostSupport  : 1; /*!< Indicates whether the UUT is capable of enumerating USB Host */
+  USBPD_USBCapa_TypeDef VDM_USBDeviceSupport: 1; /*!< Indicates whether the UUT is capable of enumerating USB Devices */
+  USBPD_ProductType_TypeDef VDM_ProductTypeUFPorCP : 3; /*!< Product type UFP or CablePlug of the UUT based on @ref USBPD_ProductType_TypeDef */
+#if defined(USBPD_REV30_SUPPORT)
+  USBPD_ProductType_TypeDef VDM_ProductTypeDFP : 3; /*!< Product type DFP of the UUT based on @ref USBPD_ProductType_TypeDef */
+  uint32_t Reserved3                        : 7; /*!< Reserved bits */
+#else
+  uint32_t Reserved3                        :10; /*!< Reserved bits */
+#endif /* USBPD_REV30_SUPPORT */
+} USBPD_VDM_SettingsTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported variable ---------------------------------------------------------*/
+/** @defgroup USBPD_GUI_API_Exported_Variable USBPD GUI API exported Variable
+  * @{
+  */
+extern GUI_USER_ParamsTypeDef GUI_USER_Params[USBPD_PORT_COUNT];
+#if !defined(_RTOS)
+extern volatile uint32_t      GUI_Flag;
+#endif /* !_RTOS */
+
+/**
+  * @}
+  */
+
+/* Exported functions ------------------------------------------------------- */
+/** @defgroup USBPD_GUI_API_Exported_Functions USBPD GUI API exported functions
+  * @{
+  */
+
+USBPD_FunctionalState GUI_Init(const uint8_t* (*CB_HWBoardVersion)(void), const uint8_t* (*CB_HWPDType)(void), uint16_t (*CB_GetVoltage)(uint8_t), int16_t (*CB_GetCurrent)(uint8_t));
+void                  GUI_Start(void);
+void                  GUI_TimerCounter(void);
+uint32_t              GUI_RXProcess(uint32_t Event);
+uint32_t              GUI_FormatAndSendNotification(uint32_t PortNum, uint32_t TypeNotification, uint32_t Value);
+uint32_t              GUI_GetMessage(uint8_t Character, uint8_t Error);
+USBPD_GUI_State       GUI_SendAnswer(uint8_t **pMsgToSend, uint8_t *pSizeMsg);
+USBPD_GUI_State       GUI_SendNotification(uint8_t PortNum, uint8_t **pMsgToSend, uint8_t *pSizeMsg, uint32_t TypeNotifcation, uint32_t Value);
+void                  GUI_PostNotificationMessage(uint8_t PortNum, uint16_t EventVal);
+void                  GUI_SaveInfo(uint8_t PortNum, uint8_t DataId, uint8_t *Ptr, uint32_t Size);
+USBPD_FunctionalState GUI_IsRunning(void);
+#if !defined(USE_STM32_UTILITY_OS)
+void                  GUI_Execute(void);
+#endif /* !USE_STM32_UTILITY_OS */
+void                  GUI_RegisterCallback_FreeText(USBPD_StatusTypeDef (*CB_FreeText)(uint8_t, uint8_t*, uint16_t));
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* _GUI_API_H */
+
diff --git a/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/usbpd_gui_memmap_template.h b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/usbpd_gui_memmap_template.h
new file mode 100644
index 0000000..75051fe
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/GUI_INTERFACE/usbpd_gui_memmap_template.h
@@ -0,0 +1,100 @@
+/**
+  ******************************************************************************
+  * @file    usbpd_gui_memmap.h
+  * @author  MCD Application Team
+  * @brief   This file contains memory mapping configuration to be able to run
+  *          Cube-Monitor-UCPD on embedded side.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#ifndef __USBPD_GUI_MEMMAP_H_
+#define __USBPD_GUI_MEMMAP_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32xxxx.h"
+#include "usbpd_def.h"
+
+/** @addtogroup STM32_USBPD_APPLICATION
+  * @{
+  */
+
+/** @addtogroup STM32_USBPD_APPLICATION_GUI
+  * @{
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/* Exported define -----------------------------------------------------------*/
+
+/* Following definitions should be adapted to used Flash configuration :
+   INDEX_PAGE : represents the number of the page used for storing USBPD settings (usually the last page)
+   ADDR_FLASH_LAST_PAGE : Flash address value of beginning of USBPD settings page
+   ADDR_FLASH_PAGE_END : Flash address value of end of USBPD settings page
+*/
+#define INDEX_PAGE              (FLASH_PAGE_NB - 1u)          /* Index of latest page                      */
+#define ADDR_FLASH_LAST_PAGE    (FLASH_BASE + (INDEX_PAGE * FLASH_PAGE_SIZE))  /* Base @ of latest page    */
+#define ADDR_FLASH_PAGE_END     (ADDR_FLASH_LAST_PAGE + FLASH_PAGE_SIZE - 1u) 
+
+#define GUI_FLASH_MAGIC_NUMBER         ADDR_FLASH_LAST_PAGE
+/* should be aligned on double word */
+#define GUI_FLASH_ADDR_NB_PDO_SNK_P0   (GUI_FLASH_MAGIC_NUMBER + 8u)
+#define GUI_FLASH_ADDR_NB_PDO_SRC_P0   (GUI_FLASH_ADDR_NB_PDO_SNK_P0 + 1u)
+#define GUI_FLASH_ADDR_NB_PDO_SNK_P1   (GUI_FLASH_ADDR_NB_PDO_SRC_P0 + 1u)
+#define GUI_FLASH_ADDR_NB_PDO_SRC_P1   (GUI_FLASH_ADDR_NB_PDO_SNK_P1 + 1u)
+
+/* should be aligned on double word */
+#define GUI_FLASH_ADDR_PDO_SRC_P0      (GUI_FLASH_MAGIC_NUMBER + 16u)
+/* New Address should be modulo 8 */
+/* New Address = (Previous Address + (size / 8 * 8) + ((size % 8) + 7) / 8 * 8) */
+#define GUI_FLASH_ADDR_PDO_SNK_P0      (GUI_FLASH_ADDR_PDO_SRC_P0 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 ))
+#define GUI_FLASH_ADDR_PDO_SRC_P1      (GUI_FLASH_ADDR_PDO_SNK_P0 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 ))
+#define GUI_FLASH_ADDR_PDO_SNK_P1      (GUI_FLASH_ADDR_PDO_SRC_P1 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 ))
+
+#define GUI_FLASH_ADDR_DPM_SETTINGS    (GUI_FLASH_ADDR_PDO_SNK_P1 + ((USBPD_MAX_NB_PDO * 4) / 8 * 8) + ((((USBPD_MAX_NB_PDO * 4) & 0x07) + 7) / 8 * 8 ))
+
+/* Define by default USBPD_PORT_COUNT to 2 */
+#define GUI_FLASH_ADDR_DPM_USER_SETTINGS  (GUI_FLASH_ADDR_DPM_SETTINGS + (sizeof(USBPD_SettingsTypeDef) * 2 /*USBPD_PORT_COUNT*/))
+
+#define GUI_FLASH_ADDR_DPM_VDM_SETTINGS   (GUI_FLASH_ADDR_DPM_USER_SETTINGS + (sizeof(USBPD_USER_SettingsTypeDef) * 2 /*USBPD_PORT_COUNT*/))
+
+#define GUI_FLASH_ADDR_DPM_ID_SETTINGS    (GUI_FLASH_ADDR_DPM_VDM_SETTINGS + (sizeof(USBPD_VDM_SettingsTypeDef) * 2 /*USBPD_PORT_COUNT*/))
+
+#define GUI_FLASH_ADDR_RESERVED           (GUI_FLASH_ADDR_DPM_ID_SETTINGS + (sizeof(USBPD_IdSettingsTypeDef) * 2 /*USBPD_PORT_COUNT*/))
+
+#define GUI_FLASH_SIZE_RESERVED           (ADDR_FLASH_PAGE_END - GUI_FLASH_ADDR_RESERVED)
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported variables --------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBPD_GUI_MEMMAP_H_ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/Release_Notes.html b/USB-PD_Provider_1port/Utilities/TRACER_EMB/Release_Notes.html
new file mode 100644
index 0000000..30b1439
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/TRACER_EMB/Release_Notes.html
@@ -0,0 +1,316 @@
+
+
+
+  
+  
+  
+  STM32 USB-C Power Delivery embedded Tracer
+  
+  
+  
+
+
+

+

+

+

+

+
Release Notes for STM32 USB-C Power Delivery embedded Tracer

+
Copyright © 2018 STMicroelectronics

+

+
+

+

+

+
License

+
This software component is licensed by ST under BSD 3-Clause license, the “Licenseâ€; You may not use this component except in compliance with the License. You may obtain a copy of the License at:

+
http://www.opensource.org/licenses/BSD-3-Clause

+
Purpose

+
This driver is used for the embedded USB-PD tracer used to debug USB-PD application.

+

+

+
Update History

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Fixed bugs list
Headline
Code aligned to support U5
update for GPDMA link with LL update
Ticket 84212 - Trace non functional with STM32F4
Remove TRACER_EMB_TX_Process prototype in tracer_emb.h
remove the TX processing

+
Known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27
    • 
+
  • STM32CubeIDE v1.2.0
    • 
+

+
Supported Devices and boards

+
Backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
+
+
+
+
+
+
+
+
+
+
+
+
Fixed bugs list
Headline
Remove reference to USBPD

+
Known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27
    • 
+
  • STM32CubeIDE v1.2.0
    • 
+

+
Supported Devices and boards

+
Backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
+
+
+
+
+
+
+
+
+
+
+
+
Fixed bugs list
Headline
* Ticket 84461 Indicate when trace is lost

+
Known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27
    • 
+
  • STM32CubeIDE v1.2.0
    • 
+

+
Supported Devices and boards

+
Backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Fixed bugs list
Headline
Improve Usart IRQ Handler execution time in tracer_emb_hw.c
Remove commented code sections
Update the hardware layer to handle GPDMA
Ticket 77333 - DMA usage in tracer_emb_hw needs to be under switch
Add 2 macros TRACER_EMB_ENABLECHANNEL and TRACER_EMB_DISABLECHANNEL to be compliant with STM32H7

+
Known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27
    • 
+
  • STM32CubeIDE v1.2.0
    • 
+

+
Supported Devices and boards

+
Backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
+
+
+
+
+
+
+
+
+
+
+
+
Fixed bugs list
Headline
Ticket 66638 - [FOSS-Audit] SLA0044 headers in Utilities files

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Contents

+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Fixed bugs list
Headline
Add new defines in tracer_emb_conf_template.h (as done in projects tracer_emb_conf.h files)
Update tracer file
remove dependence with USBPD Application
Update for low power management
call DPM_TraceWakeUp after added message
Move macro definition about USART/LPUART inside tracer_em_hw.c
Change emb_conf to be able to have trace independent of USART or LPUART
Add LPUART files
Add management of LPUART1

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+ 
+

+
Main Changes

+
Maintenance release

+
Maintenance release

+
Contents

+
+
+
+
+
+
+
+
+
+
+
+
+
Fixed bugs list
Headline
tracer embedded creation

+
known limitations

+
Development Toolchains and Compilers

+
    
+
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2
    • 
+
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25
    • 
+
  • System Workbench STM32 (SW4STM32) toolchain V2.7.2
    • 
+

+
Supported Devices and boards

+
backward compatibility

+
Dependencies

+

+

+

+

+

+
For complete documentation on STM32,visit: [www.st.com/stm32]

+This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge.
+

+
+
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/_htmresc/mini-st.css b/USB-PD_Provider_1port/Utilities/TRACER_EMB/_htmresc/mini-st.css
new file mode 100644
index 0000000..9b2d0a9
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/TRACER_EMB/_htmresc/mini-st.css
@@ -0,0 +1,1700 @@
+@charset "UTF-8";
+/*
+  Flavor name: Default (mini-default)
+  Author: Angelos Chalaris (chalarangelo@gmail.com)
+  Maintainers: Angelos Chalaris
+  mini.css version: v3.0.0-alpha.3
+*/
+/*
+  Browsers resets and base typography.
+*/
+/* Core module CSS variable definitions */
+:root {
+  --fore-color: #111;
+  --secondary-fore-color: #444;
+  --back-color: #f8f8f8;
+  --secondary-back-color: #f0f0f0;
+  --blockquote-color: #f57c00;
+  --pre-color: #1565c0;
+  --border-color: #aaa;
+  --secondary-border-color: #ddd;
+  --heading-ratio: 1.19;
+  --universal-margin: 0.5rem;
+  --universal-padding: 0.125rem;
+  --universal-border-radius: 0.125rem;
+  --a-link-color: #0277bd;
+  --a-visited-color: #01579b; }
+
+html {
+  font-size: 14px; }
+
+a, b, del, em, i, ins, q, span, strong, u {
+  font-size: 1em; }
+
+html, * {
+  font-family: -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, Ubuntu, "Helvetica Neue", Helvetica, sans-serif;
+  line-height: 1.4;
+  -webkit-text-size-adjust: 100%; }
+
+* {
+  font-size: 1rem; }
+
+body {
+  margin: 0;
+  color: var(--fore-color);
+  background: var(--back-color); }
+
+details {
+  display: block; }
+
+summary {
+  display: list-item; }
+
+abbr[title] {
+  border-bottom: none;
+  text-decoration: underline dotted; }
+
+input {
+  overflow: visible; }
+
+img {
+  max-width: 100%;
+  height: auto; }
+
+h1, h2, h3, h4, h5, h6 {
+  line-height: 1.2;
+  margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);
+  font-weight: 500; }
+  h1 small, h2 small, h3 small, h4 small, h5 small, h6 small {
+    color: var(--secondary-fore-color);
+    display: block;
+    margin-top: -0.25rem; }
+
+h1 {
+  font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); }
+
+h2 {
+  font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio); );
+  background: var(--mark-back-color);
+  font-weight: 600;
+  padding: 0.1em 0.5em 0.2em 0.5em;
+  color: var(--mark-fore-color); }
+
+h3 {
+  font-size: calc(1rem * var(--heading-ratio));
+  padding-left: calc(2 * var(--universal-margin)); 
+  /* background: var(--border-color); */
+    }
+
+h4 {
+  font-size: 1rem;);
+  padding-left: calc(4 * var(--universal-margin));  }
+
+h5 {
+  font-size: 1rem; }
+
+h6 {
+  font-size: calc(1rem / var(--heading-ratio)); }
+
+p {
+  margin: var(--universal-margin); }
+
+ol, ul {
+  margin: var(--universal-margin);
+  padding-left: calc(6 * var(--universal-margin)); }
+
+b, strong {
+  font-weight: 700; }
+
+hr {
+  box-sizing: content-box;
+  border: 0;
+  line-height: 1.25em;
+  margin: var(--universal-margin);
+  height: 0.0625rem;
+  background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); }
+
+blockquote {
+  display: block;
+  position: relative;
+  font-style: italic;
+  color: var(--secondary-fore-color);
+  margin: var(--universal-margin);
+  padding: calc(3 * var(--universal-padding));
+  border: 0.0625rem solid var(--secondary-border-color);
+  border-left: 0.375rem solid var(--blockquote-color);
+  border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+  blockquote:before {
+    position: absolute;
+    top: calc(0rem - var(--universal-padding));
+    left: 0;
+    font-family: sans-serif;
+    font-size: 3rem;
+    font-weight: 700;
+    content: "\201c";
+    color: var(--blockquote-color); }
+  blockquote[cite]:after {
+    font-style: normal;
+    font-size: 0.75em;
+    font-weight: 700;
+    content: "\a—  " attr(cite);
+    white-space: pre; }
+
+code, kbd, pre, samp {
+  font-family: Menlo, Consolas, monospace;
+  font-size: 0.85em; }
+
+code {
+  background: var(--secondary-back-color);
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+kbd {
+  background: var(--fore-color);
+  color: var(--back-color);
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+pre {
+  overflow: auto;
+  background: var(--secondary-back-color);
+  padding: calc(1.5 * var(--universal-padding));
+  margin: var(--universal-margin);
+  border: 0.0625rem solid var(--secondary-border-color);
+  border-left: 0.25rem solid var(--pre-color);
+  border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+
+sup, sub, code, kbd {
+  line-height: 0;
+  position: relative;
+  vertical-align: baseline; }
+
+small, sup, sub, figcaption {
+  font-size: 0.75em; }
+
+sup {
+  top: -0.5em; }
+
+sub {
+  bottom: -0.25em; }
+
+figure {
+  margin: var(--universal-margin); }
+
+figcaption {
+  color: var(--secondary-fore-color); }
+
+a {
+  text-decoration: none; }
+  a:link {
+    color: var(--a-link-color); }
+  a:visited {
+    color: var(--a-visited-color); }
+  a:hover, a:focus {
+    text-decoration: underline; }
+
+/*
+  Definitions for the grid system, cards and containers.
+*/
+.container {
+  margin: 0 auto;
+  padding: 0 calc(1.5 * var(--universal-padding)); }
+
+.row {
+  box-sizing: border-box;
+  display: flex;
+  flex: 0 1 auto;
+  flex-flow: row wrap; }
+
+.col-sm,
+[class^='col-sm-'],
+[class^='col-sm-offset-'],
+.row[class*='cols-sm-'] > * {
+  box-sizing: border-box;
+  flex: 0 0 auto;
+  padding: 0 calc(var(--universal-padding) / 2); }
+
+.col-sm,
+.row.cols-sm > * {
+  max-width: 100%;
+  flex-grow: 1;
+  flex-basis: 0; }
+
+.col-sm-1,
+.row.cols-sm-1 > * {
+  max-width: 8.3333333333%;
+  flex-basis: 8.3333333333%; }
+
+.col-sm-offset-0 {
+  margin-left: 0; }
+
+.col-sm-2,
+.row.cols-sm-2 > * {
+  max-width: 16.6666666667%;
+  flex-basis: 16.6666666667%; }
+
+.col-sm-offset-1 {
+  margin-left: 8.3333333333%; }
+
+.col-sm-3,
+.row.cols-sm-3 > * {
+  max-width: 25%;
+  flex-basis: 25%; }
+
+.col-sm-offset-2 {
+  margin-left: 16.6666666667%; }
+
+.col-sm-4,
+.row.cols-sm-4 > * {
+  max-width: 33.3333333333%;
+  flex-basis: 33.3333333333%; }
+
+.col-sm-offset-3 {
+  margin-left: 25%; }
+
+.col-sm-5,
+.row.cols-sm-5 > * {
+  max-width: 41.6666666667%;
+  flex-basis: 41.6666666667%; }
+
+.col-sm-offset-4 {
+  margin-left: 33.3333333333%; }
+
+.col-sm-6,
+.row.cols-sm-6 > * {
+  max-width: 50%;
+  flex-basis: 50%; }
+
+.col-sm-offset-5 {
+  margin-left: 41.6666666667%; }
+
+.col-sm-7,
+.row.cols-sm-7 > * {
+  max-width: 58.3333333333%;
+  flex-basis: 58.3333333333%; }
+
+.col-sm-offset-6 {
+  margin-left: 50%; }
+
+.col-sm-8,
+.row.cols-sm-8 > * {
+  max-width: 66.6666666667%;
+  flex-basis: 66.6666666667%; }
+
+.col-sm-offset-7 {
+  margin-left: 58.3333333333%; }
+
+.col-sm-9,
+.row.cols-sm-9 > * {
+  max-width: 75%;
+  flex-basis: 75%; }
+
+.col-sm-offset-8 {
+  margin-left: 66.6666666667%; }
+
+.col-sm-10,
+.row.cols-sm-10 > * {
+  max-width: 83.3333333333%;
+  flex-basis: 83.3333333333%; }
+
+.col-sm-offset-9 {
+  margin-left: 75%; }
+
+.col-sm-11,
+.row.cols-sm-11 > * {
+  max-width: 91.6666666667%;
+  flex-basis: 91.6666666667%; }
+
+.col-sm-offset-10 {
+  margin-left: 83.3333333333%; }
+
+.col-sm-12,
+.row.cols-sm-12 > * {
+  max-width: 100%;
+  flex-basis: 100%; }
+
+.col-sm-offset-11 {
+  margin-left: 91.6666666667%; }
+
+.col-sm-normal {
+  order: initial; }
+
+.col-sm-first {
+  order: -999; }
+
+.col-sm-last {
+  order: 999; }
+
+@media screen and (min-width: 500px) {
+  .col-md,
+  [class^='col-md-'],
+  [class^='col-md-offset-'],
+  .row[class*='cols-md-'] > * {
+    box-sizing: border-box;
+    flex: 0 0 auto;
+    padding: 0 calc(var(--universal-padding) / 2); }
+
+  .col-md,
+  .row.cols-md > * {
+    max-width: 100%;
+    flex-grow: 1;
+    flex-basis: 0; }
+
+  .col-md-1,
+  .row.cols-md-1 > * {
+    max-width: 8.3333333333%;
+    flex-basis: 8.3333333333%; }
+
+  .col-md-offset-0 {
+    margin-left: 0; }
+
+  .col-md-2,
+  .row.cols-md-2 > * {
+    max-width: 16.6666666667%;
+    flex-basis: 16.6666666667%; }
+
+  .col-md-offset-1 {
+    margin-left: 8.3333333333%; }
+
+  .col-md-3,
+  .row.cols-md-3 > * {
+    max-width: 25%;
+    flex-basis: 25%; }
+
+  .col-md-offset-2 {
+    margin-left: 16.6666666667%; }
+
+  .col-md-4,
+  .row.cols-md-4 > * {
+    max-width: 33.3333333333%;
+    flex-basis: 33.3333333333%; }
+
+  .col-md-offset-3 {
+    margin-left: 25%; }
+
+  .col-md-5,
+  .row.cols-md-5 > * {
+    max-width: 41.6666666667%;
+    flex-basis: 41.6666666667%; }
+
+  .col-md-offset-4 {
+    margin-left: 33.3333333333%; }
+
+  .col-md-6,
+  .row.cols-md-6 > * {
+    max-width: 50%;
+    flex-basis: 50%; }
+
+  .col-md-offset-5 {
+    margin-left: 41.6666666667%; }
+
+  .col-md-7,
+  .row.cols-md-7 > * {
+    max-width: 58.3333333333%;
+    flex-basis: 58.3333333333%; }
+
+  .col-md-offset-6 {
+    margin-left: 50%; }
+
+  .col-md-8,
+  .row.cols-md-8 > * {
+    max-width: 66.6666666667%;
+    flex-basis: 66.6666666667%; }
+
+  .col-md-offset-7 {
+    margin-left: 58.3333333333%; }
+
+  .col-md-9,
+  .row.cols-md-9 > * {
+    max-width: 75%;
+    flex-basis: 75%; }
+
+  .col-md-offset-8 {
+    margin-left: 66.6666666667%; }
+
+  .col-md-10,
+  .row.cols-md-10 > * {
+    max-width: 83.3333333333%;
+    flex-basis: 83.3333333333%; }
+
+  .col-md-offset-9 {
+    margin-left: 75%; }
+
+  .col-md-11,
+  .row.cols-md-11 > * {
+    max-width: 91.6666666667%;
+    flex-basis: 91.6666666667%; }
+
+  .col-md-offset-10 {
+    margin-left: 83.3333333333%; }
+
+  .col-md-12,
+  .row.cols-md-12 > * {
+    max-width: 100%;
+    flex-basis: 100%; }
+
+  .col-md-offset-11 {
+    margin-left: 91.6666666667%; }
+
+  .col-md-normal {
+    order: initial; }
+
+  .col-md-first {
+    order: -999; }
+
+  .col-md-last {
+    order: 999; } }
+@media screen and (min-width: 1280px) {
+  .col-lg,
+  [class^='col-lg-'],
+  [class^='col-lg-offset-'],
+  .row[class*='cols-lg-'] > * {
+    box-sizing: border-box;
+    flex: 0 0 auto;
+    padding: 0 calc(var(--universal-padding) / 2); }
+
+  .col-lg,
+  .row.cols-lg > * {
+    max-width: 100%;
+    flex-grow: 1;
+    flex-basis: 0; }
+
+  .col-lg-1,
+  .row.cols-lg-1 > * {
+    max-width: 8.3333333333%;
+    flex-basis: 8.3333333333%; }
+
+  .col-lg-offset-0 {
+    margin-left: 0; }
+
+  .col-lg-2,
+  .row.cols-lg-2 > * {
+    max-width: 16.6666666667%;
+    flex-basis: 16.6666666667%; }
+
+  .col-lg-offset-1 {
+    margin-left: 8.3333333333%; }
+
+  .col-lg-3,
+  .row.cols-lg-3 > * {
+    max-width: 25%;
+    flex-basis: 25%; }
+
+  .col-lg-offset-2 {
+    margin-left: 16.6666666667%; }
+
+  .col-lg-4,
+  .row.cols-lg-4 > * {
+    max-width: 33.3333333333%;
+    flex-basis: 33.3333333333%; }
+
+  .col-lg-offset-3 {
+    margin-left: 25%; }
+
+  .col-lg-5,
+  .row.cols-lg-5 > * {
+    max-width: 41.6666666667%;
+    flex-basis: 41.6666666667%; }
+
+  .col-lg-offset-4 {
+    margin-left: 33.3333333333%; }
+
+  .col-lg-6,
+  .row.cols-lg-6 > * {
+    max-width: 50%;
+    flex-basis: 50%; }
+
+  .col-lg-offset-5 {
+    margin-left: 41.6666666667%; }
+
+  .col-lg-7,
+  .row.cols-lg-7 > * {
+    max-width: 58.3333333333%;
+    flex-basis: 58.3333333333%; }
+
+  .col-lg-offset-6 {
+    margin-left: 50%; }
+
+  .col-lg-8,
+  .row.cols-lg-8 > * {
+    max-width: 66.6666666667%;
+    flex-basis: 66.6666666667%; }
+
+  .col-lg-offset-7 {
+    margin-left: 58.3333333333%; }
+
+  .col-lg-9,
+  .row.cols-lg-9 > * {
+    max-width: 75%;
+    flex-basis: 75%; }
+
+  .col-lg-offset-8 {
+    margin-left: 66.6666666667%; }
+
+  .col-lg-10,
+  .row.cols-lg-10 > * {
+    max-width: 83.3333333333%;
+    flex-basis: 83.3333333333%; }
+
+  .col-lg-offset-9 {
+    margin-left: 75%; }
+
+  .col-lg-11,
+  .row.cols-lg-11 > * {
+    max-width: 91.6666666667%;
+    flex-basis: 91.6666666667%; }
+
+  .col-lg-offset-10 {
+    margin-left: 83.3333333333%; }
+
+  .col-lg-12,
+  .row.cols-lg-12 > * {
+    max-width: 100%;
+    flex-basis: 100%; }
+
+  .col-lg-offset-11 {
+    margin-left: 91.6666666667%; }
+
+  .col-lg-normal {
+    order: initial; }
+
+  .col-lg-first {
+    order: -999; }
+
+  .col-lg-last {
+    order: 999; } }
+/* Card component CSS variable definitions */
+:root {
+  --card-back-color: #f8f8f8;
+  --card-fore-color: #111;
+  --card-border-color: #ddd; }
+
+.card {
+  display: flex;
+  flex-direction: column;
+  justify-content: space-between;
+  align-self: center;
+  position: relative;
+  width: 100%;
+  background: var(--card-back-color);
+  color: var(--card-fore-color);
+  border: 0.0625rem solid var(--card-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin);
+  overflow: hidden; }
+  @media screen and (min-width: 320px) {
+    .card {
+      max-width: 320px; } }
+  .card > .sectione {
+    background: var(--card-back-color);
+    color: var(--card-fore-color);
+    box-sizing: border-box;
+    margin: 0;
+    border: 0;
+    border-radius: 0;
+    border-bottom: 0.0625rem solid var(--card-border-color);
+    padding: var(--universal-padding);
+    width: 100%; }
+    .card > .sectione.media {
+      height: 200px;
+      padding: 0;
+      -o-object-fit: cover;
+      object-fit: cover; }
+  .card > .sectione:last-child {
+    border-bottom: 0; }
+
+/*
+  Custom elements for card elements.
+*/
+@media screen and (min-width: 240px) {
+  .card.small {
+    max-width: 240px; } }
+@media screen and (min-width: 480px) {
+  .card.large {
+    max-width: 480px; } }
+.card.fluid {
+  max-width: 100%;
+  width: auto; }
+
+.card.warning {
+/*  --card-back-color: #ffca28; */
+  --card-back-color: #e5b8b7;
+  --card-border-color: #e8b825; }
+
+.card.error {
+  --card-back-color: #b71c1c;
+  --card-fore-color: #f8f8f8;
+  --card-border-color: #a71a1a; }
+
+.card > .sectione.dark {
+  --card-back-color: #e0e0e0; }
+
+.card > .sectione.double-padded {
+  padding: calc(1.5 * var(--universal-padding)); }
+
+/*
+  Definitions for forms and input elements.
+*/
+/* Input_control module CSS variable definitions */
+:root {
+  --form-back-color: #f0f0f0;
+  --form-fore-color: #111;
+  --form-border-color: #ddd;
+  --input-back-color: #f8f8f8;
+  --input-fore-color: #111;
+  --input-border-color: #ddd;
+  --input-focus-color: #0288d1;
+  --input-invalid-color: #d32f2f;
+  --button-back-color: #e2e2e2;
+  --button-hover-back-color: #dcdcdc;
+  --button-fore-color: #212121;
+  --button-border-color: transparent;
+  --button-hover-border-color: transparent;
+  --button-group-border-color: rgba(124, 124, 124, 0.54); }
+
+form {
+  background: var(--form-back-color);
+  color: var(--form-fore-color);
+  border: 0.0625rem solid var(--form-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin);
+  padding: calc(2 * var(--universal-padding)) var(--universal-padding); }
+
+fieldset {
+  border: 0.0625rem solid var(--form-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: calc(var(--universal-margin) / 4);
+  padding: var(--universal-padding); }
+
+legend {
+  box-sizing: border-box;
+  display: table;
+  max-width: 100%;
+  white-space: normal;
+  font-weight: 700;
+  padding: calc(var(--universal-padding) / 2); }
+
+label {
+  padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+.input-group {
+  display: inline-block; }
+  .input-group.fluid {
+    display: flex;
+    align-items: center;
+    justify-content: center; }
+    .input-group.fluid > input {
+      max-width: 100%;
+      flex-grow: 1;
+      flex-basis: 0px; }
+    @media screen and (max-width: 499px) {
+      .input-group.fluid {
+        align-items: stretch;
+        flex-direction: column; } }
+  .input-group.vertical {
+    display: flex;
+    align-items: stretch;
+    flex-direction: column; }
+    .input-group.vertical > input {
+      max-width: 100%;
+      flex-grow: 1;
+      flex-basis: 0px; }
+
+[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button {
+  height: auto; }
+
+[type="search"] {
+  -webkit-appearance: textfield;
+  outline-offset: -2px; }
+
+[type="search"]::-webkit-search-cancel-button,
+[type="search"]::-webkit-search-decoration {
+  -webkit-appearance: none; }
+
+input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"],
+[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select {
+  box-sizing: border-box;
+  background: var(--input-back-color);
+  color: var(--input-fore-color);
+  border: 0.0625rem solid var(--input-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: calc(var(--universal-margin) / 2);
+  padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus {
+  border-color: var(--input-focus-color);
+  box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid {
+  border-color: var(--input-invalid-color);
+  box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] {
+  background: var(--secondary-back-color); }
+
+select {
+  max-width: 100%; }
+
+option {
+  overflow: hidden;
+  text-overflow: ellipsis; }
+
+[type="checkbox"], [type="radio"] {
+  -webkit-appearance: none;
+  -moz-appearance: none;
+  appearance: none;
+  position: relative;
+  height: calc(1rem + var(--universal-padding) / 2);
+  width: calc(1rem + var(--universal-padding) / 2);
+  vertical-align: text-bottom;
+  padding: 0;
+  flex-basis: calc(1rem + var(--universal-padding) / 2) !important;
+  flex-grow: 0 !important; }
+  [type="checkbox"]:checked:before, [type="radio"]:checked:before {
+    position: absolute; }
+
+[type="checkbox"]:checked:before {
+  content: '\2713';
+  font-family: sans-serif;
+  font-size: calc(1rem + var(--universal-padding) / 2);
+  top: calc(0rem - var(--universal-padding));
+  left: calc(var(--universal-padding) / 4); }
+
+[type="radio"] {
+  border-radius: 100%; }
+  [type="radio"]:checked:before {
+    border-radius: 100%;
+    content: '';
+    top: calc(0.0625rem + var(--universal-padding) / 2);
+    left: calc(0.0625rem + var(--universal-padding) / 2);
+    background: var(--input-fore-color);
+    width: 0.5rem;
+    height: 0.5rem; }
+
+:placeholder-shown {
+  color: var(--input-fore-color); }
+
+::-ms-placeholder {
+  color: var(--input-fore-color);
+  opacity: 0.54; }
+
+button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner {
+  border-style: none;
+  padding: 0; }
+
+button, html [type="button"], [type="reset"], [type="submit"] {
+  -webkit-appearance: button; }
+
+button {
+  overflow: visible;
+  text-transform: none; }
+
+button, [type="button"], [type="submit"], [type="reset"],
+a.button, label.button, .button,
+a[role="button"], label[role="button"], [role="button"] {
+  display: inline-block;
+  background: var(--button-back-color);
+  color: var(--button-fore-color);
+  border: 0.0625rem solid var(--button-border-color);
+  border-radius: var(--universal-border-radius);
+  padding: var(--universal-padding) calc(1.5 * var(--universal-padding));
+  margin: var(--universal-margin);
+  text-decoration: none;
+  cursor: pointer;
+  transition: background 0.3s; }
+  button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus,
+  a.button:hover,
+  a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus,
+  a[role="button"]:hover,
+  a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus {
+    background: var(--button-hover-back-color);
+    border-color: var(--button-hover-border-color); }
+
+input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] {
+  cursor: not-allowed;
+  opacity: 0.75; }
+
+.button-group {
+  display: flex;
+  border: 0.0625rem solid var(--button-group-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin); }
+  .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] {
+    margin: 0;
+    max-width: 100%;
+    flex: 1 1 auto;
+    text-align: center;
+    border: 0;
+    border-radius: 0;
+    box-shadow: none; }
+  .button-group > :not(:first-child) {
+    border-left: 0.0625rem solid var(--button-group-border-color); }
+  @media screen and (max-width: 499px) {
+    .button-group {
+      flex-direction: column; }
+      .button-group > :not(:first-child) {
+        border: 0;
+        border-top: 0.0625rem solid var(--button-group-border-color); } }
+
+/*
+  Custom elements for forms and input elements.
+*/
+button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary {
+  --button-back-color: #1976d2;
+  --button-fore-color: #f8f8f8; }
+  button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus {
+    --button-hover-back-color: #1565c0; }
+
+button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary {
+  --button-back-color: #d32f2f;
+  --button-fore-color: #f8f8f8; }
+  button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus {
+    --button-hover-back-color: #c62828; }
+
+button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary {
+  --button-back-color: #308732;
+  --button-fore-color: #f8f8f8; }
+  button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus {
+    --button-hover-back-color: #277529; }
+
+button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse {
+  --button-back-color: #212121;
+  --button-fore-color: #f8f8f8; }
+  button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus {
+    --button-hover-back-color: #111; }
+
+button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small {
+  padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding));
+  margin: var(--universal-margin); }
+
+button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large {
+  padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding));
+  margin: var(--universal-margin); }
+
+/*
+  Definitions for navigation elements.
+*/
+/* Navigation module CSS variable definitions */
+:root {
+  --header-back-color: #f8f8f8;
+  --header-hover-back-color: #f0f0f0;
+  --header-fore-color: #444;
+  --header-border-color: #ddd;
+  --nav-back-color: #f8f8f8;
+  --nav-hover-back-color: #f0f0f0;
+  --nav-fore-color: #444;
+  --nav-border-color: #ddd;
+  --nav-link-color: #0277bd;
+  --footer-fore-color: #444;
+  --footer-back-color: #f8f8f8;
+  --footer-border-color: #ddd;
+  --footer-link-color: #0277bd;
+  --drawer-back-color: #f8f8f8;
+  --drawer-hover-back-color: #f0f0f0;
+  --drawer-border-color: #ddd;
+  --drawer-close-color: #444; }
+
+header {
+  height: 3.1875rem;
+  background: var(--header-back-color);
+  color: var(--header-fore-color);
+  border-bottom: 0.0625rem solid var(--header-border-color);
+  padding: calc(var(--universal-padding) / 4) 0;
+  white-space: nowrap;
+  overflow-x: auto;
+  overflow-y: hidden; }
+  header.row {
+    box-sizing: content-box; }
+  header .logo {
+    color: var(--header-fore-color);
+    font-size: 1.75rem;
+    padding: var(--universal-padding) calc(2 * var(--universal-padding));
+    text-decoration: none; }
+  header button, header [type="button"], header .button, header [role="button"] {
+    box-sizing: border-box;
+    position: relative;
+    top: calc(0rem - var(--universal-padding) / 4);
+    height: calc(3.1875rem + var(--universal-padding) / 2);
+    background: var(--header-back-color);
+    line-height: calc(3.1875rem - var(--universal-padding) * 1.5);
+    text-align: center;
+    color: var(--header-fore-color);
+    border: 0;
+    border-radius: 0;
+    margin: 0;
+    text-transform: uppercase; }
+    header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus {
+      background: var(--header-hover-back-color); }
+
+nav {
+  background: var(--nav-back-color);
+  color: var(--nav-fore-color);
+  border: 0.0625rem solid var(--nav-border-color);
+  border-radius: var(--universal-border-radius);
+  margin: var(--universal-margin); }
+  nav * {
+    padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+  nav a, nav a:visited {
+    display: block;
+    color: var(--nav-link-color);
+    border-radius: var(--universal-border-radius);
+    transition: background 0.3s; }
+    nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus {
+      text-decoration: none;
+      background: var(--nav-hover-back-color); }
+  nav .sublink-1 {
+    position: relative;
+    margin-left: calc(2 * var(--universal-padding)); }
+    nav .sublink-1:before {
+      position: absolute;
+      left: calc(var(--universal-padding) - 1 * var(--universal-padding));
+      top: -0.0625rem;
+      content: '';
+      height: 100%;
+      border: 0.0625rem solid var(--nav-border-color);
+      border-left: 0; }
+  nav .sublink-2 {
+    position: relative;
+    margin-left: calc(4 * var(--universal-padding)); }
+    nav .sublink-2:before {
+      position: absolute;
+      left: calc(var(--universal-padding) - 3 * var(--universal-padding));
+      top: -0.0625rem;
+      content: '';
+      height: 100%;
+      border: 0.0625rem solid var(--nav-border-color);
+      border-left: 0; }
+
+footer {
+  background: var(--footer-back-color);
+  color: var(--footer-fore-color);
+  border-top: 0.0625rem solid var(--footer-border-color);
+  padding: calc(2 * var(--universal-padding)) var(--universal-padding);
+  font-size: 0.875rem; }
+  footer a, footer a:visited {
+    color: var(--footer-link-color); }
+
+header.sticky {
+  position: -webkit-sticky;
+  position: sticky;
+  z-index: 1101;
+  top: 0; }
+
+footer.sticky {
+  position: -webkit-sticky;
+  position: sticky;
+  z-index: 1101;
+  bottom: 0; }
+
+.drawer-toggle:before {
+  display: inline-block;
+  position: relative;
+  vertical-align: bottom;
+  content: '\00a0\2261\00a0';
+  font-family: sans-serif;
+  font-size: 1.5em; }
+@media screen and (min-width: 500px) {
+  .drawer-toggle:not(.persistent) {
+    display: none; } }
+
+[type="checkbox"].drawer {
+  height: 1px;
+  width: 1px;
+  margin: -1px;
+  overflow: hidden;
+  position: absolute;
+  clip: rect(0 0 0 0);
+  -webkit-clip-path: inset(100%);
+  clip-path: inset(100%); }
+  [type="checkbox"].drawer + * {
+    display: block;
+    box-sizing: border-box;
+    position: fixed;
+    top: 0;
+    width: 320px;
+    height: 100vh;
+    overflow-y: auto;
+    background: var(--drawer-back-color);
+    border: 0.0625rem solid var(--drawer-border-color);
+    border-radius: 0;
+    margin: 0;
+    z-index: 1110;
+    right: -320px;
+    transition: right 0.3s; }
+    [type="checkbox"].drawer + * .drawer-close {
+      position: absolute;
+      top: var(--universal-margin);
+      right: var(--universal-margin);
+      z-index: 1111;
+      width: 2rem;
+      height: 2rem;
+      border-radius: var(--universal-border-radius);
+      padding: var(--universal-padding);
+      margin: 0;
+      cursor: pointer;
+      transition: background 0.3s; }
+      [type="checkbox"].drawer + * .drawer-close:before {
+        display: block;
+        content: '\00D7';
+        color: var(--drawer-close-color);
+        position: relative;
+        font-family: sans-serif;
+        font-size: 2rem;
+        line-height: 1;
+        text-align: center; }
+      [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus {
+        background: var(--drawer-hover-back-color); }
+    @media screen and (max-width: 320px) {
+      [type="checkbox"].drawer + * {
+        width: 100%; } }
+  [type="checkbox"].drawer:checked + * {
+    right: 0; }
+  @media screen and (min-width: 500px) {
+    [type="checkbox"].drawer:not(.persistent) + * {
+      position: static;
+      height: 100%;
+      z-index: 1100; }
+      [type="checkbox"].drawer:not(.persistent) + * .drawer-close {
+        display: none; } }
+
+/*
+  Definitions for the responsive table component.
+*/
+/* Table module CSS variable definitions. */
+:root {
+  --table-border-color: #aaa;
+  --table-border-separator-color: #666;
+  --table-head-back-color: #e6e6e6;
+  --table-head-fore-color: #111;
+  --table-body-back-color: #f8f8f8;
+  --table-body-fore-color: #111;
+  --table-body-alt-back-color: #eee; }
+
+table {
+  border-collapse: separate;
+  border-spacing: 0;
+  : margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);
+  display: flex;
+  flex: 0 1 auto;
+  flex-flow: row wrap;
+  padding: var(--universal-padding);
+  padding-top: 0;
+	margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);	}
+  table caption {
+    font-size: 1.25 * rem;
+    margin: calc(2 * var(--universal-margin)) 0;
+    max-width: 100%;
+    flex: 0 0 100%;
+		text-align: left;}
+  table thead, table tbody {
+    display: flex;
+    flex-flow: row wrap;
+    border: 0.0625rem solid var(--table-border-color); }
+  table thead {
+    z-index: 999;
+    border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0;
+    border-bottom: 0.0625rem solid var(--table-border-separator-color); }
+  table tbody {
+    border-top: 0;
+    margin-top: calc(0 - var(--universal-margin));
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+  table tr {
+    display: flex;
+    padding: 0; }
+  table th, table td {
+    padding: calc(0.5 * var(--universal-padding));
+		font-size: 0.9rem; }
+  table th {
+    text-align: left;
+    background: var(--table-head-back-color);
+    color: var(--table-head-fore-color); }
+  table td {
+    background: var(--table-body-back-color);
+    color: var(--table-body-fore-color);
+    border-top: 0.0625rem solid var(--table-border-color); }
+
+table:not(.horizontal) {
+  overflow: auto;
+  max-height: 850px; }
+  table:not(.horizontal) thead, table:not(.horizontal) tbody {
+    max-width: 100%;
+    flex: 0 0 100%; }
+  table:not(.horizontal) tr {
+    flex-flow: row wrap;
+    flex: 0 0 100%; }
+  table:not(.horizontal) th, table:not(.horizontal) td {
+    flex: 1 0 0%;
+    overflow: hidden;
+    text-overflow: ellipsis; }
+  table:not(.horizontal) thead {
+    position: sticky;
+    top: 0; }
+  table:not(.horizontal) tbody tr:first-child td {
+    border-top: 0; }
+
+table.horizontal {
+  border: 0; }
+  table.horizontal thead, table.horizontal tbody {
+    border: 0;
+    flex-flow: row nowrap; }
+  table.horizontal tbody {
+    overflow: auto;
+    justify-content: space-between;
+    flex: 1 0 0;
+    margin-left: calc( 4 * var(--universal-margin));
+    padding-bottom: calc(var(--universal-padding) / 4); }
+  table.horizontal tr {
+    flex-direction: column;
+    flex: 1 0 auto; }
+  table.horizontal th, table.horizontal td {
+    width: 100%;
+    border: 0;
+    border-bottom: 0.0625rem solid var(--table-border-color); }
+    table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) {
+      border-top: 0; }
+  table.horizontal th {
+    text-align: right;
+    border-left: 0.0625rem solid var(--table-border-color);
+    border-right: 0.0625rem solid var(--table-border-separator-color); }
+  table.horizontal thead tr:first-child {
+    padding-left: 0; }
+  table.horizontal th:first-child, table.horizontal td:first-child {
+    border-top: 0.0625rem solid var(--table-border-color); }
+  table.horizontal tbody tr:last-child td {
+    border-right: 0.0625rem solid var(--table-border-color); }
+    table.horizontal tbody tr:last-child td:first-child {
+      border-top-right-radius: 0.25rem; }
+    table.horizontal tbody tr:last-child td:last-child {
+      border-bottom-right-radius: 0.25rem; }
+  table.horizontal thead tr:first-child th:first-child {
+    border-top-left-radius: 0.25rem; }
+  table.horizontal thead tr:first-child th:last-child {
+    border-bottom-left-radius: 0.25rem; }
+
+@media screen and (max-width: 499px) {
+  table, table.horizontal {
+    border-collapse: collapse;
+    border: 0;
+    width: 100%;
+    display: table; }
+    table thead, table th, table.horizontal thead, table.horizontal th {
+      border: 0;
+      height: 1px;
+      width: 1px;
+      margin: -1px;
+      overflow: hidden;
+      padding: 0;
+      position: absolute;
+      clip: rect(0 0 0 0);
+      -webkit-clip-path: inset(100%);
+      clip-path: inset(100%); }
+    table tbody, table.horizontal tbody {
+      border: 0;
+      display: table-row-group; }
+    table tr, table.horizontal tr {
+      display: block;
+      border: 0.0625rem solid var(--table-border-color);
+      border-radius: var(--universal-border-radius);
+      background: #fafafa;
+      padding: var(--universal-padding);
+      margin: var(--universal-margin);
+      margin-bottom: calc(2 * var(--universal-margin)); }
+    table th, table td, table.horizontal th, table.horizontal td {
+      width: auto; }
+    table td, table.horizontal td {
+      display: block;
+      border: 0;
+      text-align: right; }
+    table td:before, table.horizontal td:before {
+      content: attr(data-label);
+      float: left;
+      font-weight: 600; }
+    table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child {
+      border-top: 0; }
+    table tbody tr:last-child td, table.horizontal tbody tr:last-child td {
+      border-right: 0; } }
+:root {
+  --table-body-alt-back-color: #eee; }
+
+table tr:nth-of-type(2n) > td {
+  background: var(--table-body-alt-back-color); }
+
+@media screen and (max-width: 500px) {
+  table tr:nth-of-type(2n) {
+    background: var(--table-body-alt-back-color); } }
+:root {
+  --table-body-hover-back-color: #90caf9; }
+
+table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+  background: var(--table-body-hover-back-color); }
+
+@media screen and (max-width: 500px) {
+  table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+    background: var(--table-body-hover-back-color); } }
+/*
+  Definitions for contextual background elements, toasts and tooltips.
+*/
+/* Contextual module CSS variable definitions */
+:root {
+  --mark-back-color: #0277bd;
+  --mark-fore-color: #fafafa; }
+
+mark {
+  background: var(--mark-back-color);
+  color: var(--mark-fore-color);
+  font-size: 0.95em;
+  line-height: 1em;
+  border-radius: var(--universal-border-radius);
+  padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+  mark.inline-block {
+    display: inline-block;
+    font-size: 1em;
+    line-height: 1.5;
+    padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+:root {
+  --toast-back-color: #424242;
+  --toast-fore-color: #fafafa; }
+
+.toast {
+  position: fixed;
+  bottom: calc(var(--universal-margin) * 3);
+  left: 50%;
+  transform: translate(-50%, -50%);
+  z-index: 1111;
+  color: var(--toast-fore-color);
+  background: var(--toast-back-color);
+  border-radius: calc(var(--universal-border-radius) * 16);
+  padding: var(--universal-padding) calc(var(--universal-padding) * 3); }
+
+:root {
+  --tooltip-back-color: #212121;
+  --tooltip-fore-color: #fafafa; }
+
+.tooltip {
+  position: relative;
+  display: inline-block; }
+  .tooltip:before, .tooltip:after {
+    position: absolute;
+    opacity: 0;
+    clip: rect(0 0 0 0);
+    -webkit-clip-path: inset(100%);
+    clip-path: inset(100%);
+    transition: all 0.3s;
+    z-index: 1010;
+    left: 50%; }
+  .tooltip:not(.bottom):before, .tooltip:not(.bottom):after {
+    bottom: 75%; }
+  .tooltip.bottom:before, .tooltip.bottom:after {
+    top: 75%; }
+  .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after {
+    opacity: 1;
+    clip: auto;
+    -webkit-clip-path: inset(0%);
+    clip-path: inset(0%); }
+  .tooltip:before {
+    content: '';
+    background: transparent;
+    border: var(--universal-margin) solid transparent;
+    left: calc(50% - var(--universal-margin)); }
+  .tooltip:not(.bottom):before {
+    border-top-color: #212121; }
+  .tooltip.bottom:before {
+    border-bottom-color: #212121; }
+  .tooltip:after {
+    content: attr(aria-label);
+    color: var(--tooltip-fore-color);
+    background: var(--tooltip-back-color);
+    border-radius: var(--universal-border-radius);
+    padding: var(--universal-padding);
+    white-space: nowrap;
+    transform: translateX(-50%); }
+  .tooltip:not(.bottom):after {
+    margin-bottom: calc(2 * var(--universal-margin)); }
+  .tooltip.bottom:after {
+    margin-top: calc(2 * var(--universal-margin)); }
+
+:root {
+  --modal-overlay-color: rgba(0, 0, 0, 0.45);
+  --modal-close-color: #444;
+  --modal-close-hover-color: #f0f0f0; }
+
+[type="checkbox"].modal {
+  height: 1px;
+  width: 1px;
+  margin: -1px;
+  overflow: hidden;
+  position: absolute;
+  clip: rect(0 0 0 0);
+  -webkit-clip-path: inset(100%);
+  clip-path: inset(100%); }
+  [type="checkbox"].modal + div {
+    position: fixed;
+    top: 0;
+    left: 0;
+    display: none;
+    width: 100vw;
+    height: 100vh;
+    background: var(--modal-overlay-color); }
+    [type="checkbox"].modal + div .card {
+      margin: 0 auto;
+      max-height: 50vh;
+      overflow: auto; }
+      [type="checkbox"].modal + div .card .modal-close {
+        position: absolute;
+        top: 0;
+        right: 0;
+        width: 1.75rem;
+        height: 1.75rem;
+        border-radius: var(--universal-border-radius);
+        padding: var(--universal-padding);
+        margin: 0;
+        cursor: pointer;
+        transition: background 0.3s; }
+        [type="checkbox"].modal + div .card .modal-close:before {
+          display: block;
+          content: '\00D7';
+          color: var(--modal-close-color);
+          position: relative;
+          font-family: sans-serif;
+          font-size: 1.75rem;
+          line-height: 1;
+          text-align: center; }
+        [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus {
+          background: var(--modal-close-hover-color); }
+  [type="checkbox"].modal:checked + div {
+    display: flex;
+    flex: 0 1 auto;
+    z-index: 1200; }
+    [type="checkbox"].modal:checked + div .card .modal-close {
+      z-index: 1211; }
+
+:root {
+  --collapse-label-back-color: #e8e8e8;
+  --collapse-label-fore-color: #212121;
+  --collapse-label-hover-back-color: #f0f0f0;
+  --collapse-selected-label-back-color: #ececec;
+  --collapse-border-color: #ddd;
+  --collapse-content-back-color: #fafafa;
+  --collapse-selected-label-border-color: #0277bd; }
+
+.collapse {
+  width: calc(100% - 2 * var(--universal-margin));
+  opacity: 1;
+  display: flex;
+  flex-direction: column;
+  margin: var(--universal-margin);
+  border-radius: var(--universal-border-radius); }
+  .collapse > [type="radio"], .collapse > [type="checkbox"] {
+    height: 1px;
+    width: 1px;
+    margin: -1px;
+    overflow: hidden;
+    position: absolute;
+    clip: rect(0 0 0 0);
+    -webkit-clip-path: inset(100%);
+    clip-path: inset(100%); }
+  .collapse > label {
+    flex-grow: 1;
+    display: inline-block;
+    height: 1.5rem;
+    cursor: pointer;
+    transition: background 0.3s;
+    color: var(--collapse-label-fore-color);
+    background: var(--collapse-label-back-color);
+    border: 0.0625rem solid var(--collapse-border-color);
+    padding: calc(1.5 * var(--universal-padding)); }
+    .collapse > label:hover, .collapse > label:focus {
+      background: var(--collapse-label-hover-back-color); }
+    .collapse > label + div {
+      flex-basis: auto;
+      height: 1px;
+      width: 1px;
+      margin: -1px;
+      overflow: hidden;
+      position: absolute;
+      clip: rect(0 0 0 0);
+      -webkit-clip-path: inset(100%);
+      clip-path: inset(100%);
+      transition: max-height 0.3s;
+      max-height: 1px; }
+  .collapse > :checked + label {
+    background: var(--collapse-selected-label-back-color);
+    border-bottom-color: var(--collapse-selected-label-border-color); }
+    .collapse > :checked + label + div {
+      box-sizing: border-box;
+      position: relative;
+      width: 100%;
+      height: auto;
+      overflow: auto;
+      margin: 0;
+      background: var(--collapse-content-back-color);
+      border: 0.0625rem solid var(--collapse-border-color);
+      border-top: 0;
+      padding: var(--universal-padding);
+      clip: auto;
+      -webkit-clip-path: inset(0%);
+      clip-path: inset(0%);
+      max-height: 850px; }
+  .collapse > label:not(:first-of-type) {
+    border-top: 0; }
+  .collapse > label:first-of-type {
+    border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; }
+  .collapse > label:last-of-type:not(:first-of-type) {
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+  .collapse > label:last-of-type:first-of-type {
+    border-radius: var(--universal-border-radius); }
+  .collapse > :checked:last-of-type:not(:first-of-type) + label {
+    border-radius: 0; }
+  .collapse > :checked:last-of-type + label + div {
+    border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+
+/*
+  Custom elements for contextual background elements, toasts and tooltips.
+*/
+mark.secondary {
+  --mark-back-color: #d32f2f; }
+
+mark.tertiary {
+  --mark-back-color: #308732; }
+
+mark.tag {
+  padding: calc(var(--universal-padding)/2) var(--universal-padding);
+  border-radius: 1em; }
+
+/*
+  Definitions for progress elements and spinners.
+*/
+/* Progess module CSS variable definitions */
+:root {
+  --progress-back-color: #ddd;
+  --progress-fore-color: #555; }
+
+progress {
+  display: block;
+  vertical-align: baseline;
+  -webkit-appearance: none;
+  -moz-appearance: none;
+  appearance: none;
+  height: 0.75rem;
+  width: calc(100% - 2 * var(--universal-margin));
+  margin: var(--universal-margin);
+  border: 0;
+  border-radius: calc(2 * var(--universal-border-radius));
+  background: var(--progress-back-color);
+  color: var(--progress-fore-color); }
+  progress::-webkit-progress-value {
+    background: var(--progress-fore-color);
+    border-top-left-radius: calc(2 * var(--universal-border-radius));
+    border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+  progress::-webkit-progress-bar {
+    background: var(--progress-back-color); }
+  progress::-moz-progress-bar {
+    background: var(--progress-fore-color);
+    border-top-left-radius: calc(2 * var(--universal-border-radius));
+    border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+  progress[value="1000"]::-webkit-progress-value {
+    border-radius: calc(2 * var(--universal-border-radius)); }
+  progress[value="1000"]::-moz-progress-bar {
+    border-radius: calc(2 * var(--universal-border-radius)); }
+  progress.inline {
+    display: inline-block;
+    vertical-align: middle;
+    width: 60%; }
+
+:root {
+  --spinner-back-color: #ddd;
+  --spinner-fore-color: #555; }
+
+@keyframes spinner-donut-anim {
+  0% {
+    transform: rotate(0deg); }
+  100% {
+    transform: rotate(360deg); } }
+.spinner {
+  display: inline-block;
+  margin: var(--universal-margin);
+  border: 0.25rem solid var(--spinner-back-color);
+  border-left: 0.25rem solid var(--spinner-fore-color);
+  border-radius: 50%;
+  width: 1.25rem;
+  height: 1.25rem;
+  animation: spinner-donut-anim 1.2s linear infinite; }
+
+/*
+  Custom elements for progress bars and spinners.
+*/
+progress.primary {
+  --progress-fore-color: #1976d2; }
+
+progress.secondary {
+  --progress-fore-color: #d32f2f; }
+
+progress.tertiary {
+  --progress-fore-color: #308732; }
+
+.spinner.primary {
+  --spinner-fore-color: #1976d2; }
+
+.spinner.secondary {
+  --spinner-fore-color: #d32f2f; }
+
+.spinner.tertiary {
+  --spinner-fore-color: #308732; }
+
+/*
+  Definitions for icons - powered by Feather (https://feathericons.com/).
+*/
+span[class^='icon-'] {
+  display: inline-block;
+  height: 1em;
+  width: 1em;
+  vertical-align: -0.125em;
+  background-size: contain;
+  margin: 0 calc(var(--universal-margin) / 4); }
+  span[class^='icon-'].secondary {
+    -webkit-filter: invert(25%);
+    filter: invert(25%); }
+  span[class^='icon-'].inverse {
+    -webkit-filter: invert(100%);
+    filter: invert(100%); }
+
+span.icon-alert {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-bookmark {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-calendar {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-credit {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-edit {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); }
+span.icon-link {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-help {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-home {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-info {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-lock {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-mail {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-location {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-phone {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-rss {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-search {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-settings {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-share {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-cart {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-upload {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-user {
+  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); }
+
+/*
+  Definitions for utilities and helper classes.
+*/
+/* Utility module CSS variable definitions */
+:root {
+  --generic-border-color: rgba(0, 0, 0, 0.3);
+  --generic-box-shadow: 0 0.25rem 0.25rem 0 rgba(0, 0, 0, 0.125), 0 0.125rem 0.125rem -0.125rem rgba(0, 0, 0, 0.25); }
+
+.hidden {
+  display: none !important; }
+
+.visually-hidden {
+  position: absolute !important;
+  width: 1px !important;
+  height: 1px !important;
+  margin: -1px !important;
+  border: 0 !important;
+  padding: 0 !important;
+  clip: rect(0 0 0 0) !important;
+  -webkit-clip-path: inset(100%) !important;
+  clip-path: inset(100%) !important;
+  overflow: hidden !important; }
+
+.bordered {
+  border: 0.0625rem solid var(--generic-border-color) !important; }
+
+.rounded {
+  border-radius: var(--universal-border-radius) !important; }
+
+.circular {
+  border-radius: 50% !important; }
+
+.shadowed {
+  box-shadow: var(--generic-box-shadow) !important; }
+
+.responsive-margin {
+  margin: calc(var(--universal-margin) / 4) !important; }
+  @media screen and (min-width: 500px) {
+    .responsive-margin {
+      margin: calc(var(--universal-margin) / 2) !important; } }
+  @media screen and (min-width: 1280px) {
+    .responsive-margin {
+      margin: var(--universal-margin) !important; } }
+
+.responsive-padding {
+  padding: calc(var(--universal-padding) / 4) !important; }
+  @media screen and (min-width: 500px) {
+    .responsive-padding {
+      padding: calc(var(--universal-padding) / 2) !important; } }
+  @media screen and (min-width: 1280px) {
+    .responsive-padding {
+      padding: var(--universal-padding) !important; } }
+
+@media screen and (max-width: 499px) {
+  .hidden-sm {
+    display: none !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+  .hidden-md {
+    display: none !important; } }
+@media screen and (min-width: 1280px) {
+  .hidden-lg {
+    display: none !important; } }
+@media screen and (max-width: 499px) {
+  .visually-hidden-sm {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+  .visually-hidden-md {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+@media screen and (min-width: 1280px) {
+  .visually-hidden-lg {
+    position: absolute !important;
+    width: 1px !important;
+    height: 1px !important;
+    margin: -1px !important;
+    border: 0 !important;
+    padding: 0 !important;
+    clip: rect(0 0 0 0) !important;
+    -webkit-clip-path: inset(100%) !important;
+    clip-path: inset(100%) !important;
+    overflow: hidden !important; } }
+
+/*# sourceMappingURL=mini-default.css.map */
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/_htmresc/st_logo.png b/USB-PD_Provider_1port/Utilities/TRACER_EMB/_htmresc/st_logo.png
new file mode 100644
index 0000000..8b80057
Binary files /dev/null and b/USB-PD_Provider_1port/Utilities/TRACER_EMB/_htmresc/st_logo.png differ
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb.c b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb.c
new file mode 100644
index 0000000..aca82ef
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb.c
@@ -0,0 +1,393 @@
+/**
+  ******************************************************************************
+  * @file    tracer_emb.c
+  * @author  MCD Application Team
+  * @brief   This file contains embeded tracer control functions.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "tracer_emb.h"
+#include "tracer_emb_hw.h"
+#include "string.h"
+
+/** @addtogroup TRACER_EMB
+  * @{
+  */
+
+/** @addtogroup TRACER_EMB
+  * @{
+  */
+
+/** @addtogroup TRACER_EMB
+  * @{
+  */
+
+/* Private enums -------------------------------------------------------------*/
+
+
+/* Private typedef -----------------------------------------------------------*/
+/** @defgroup TRACER_EMB_Private_TypeDef EMB TRACER Private typedef
+  * @{
+  */
+ typedef enum {
+  TRACER_OVERFLOW_NONE,
+  TRACER_OVERFLOW_DETECTED,
+  TRACER_OVERFLOW_SENT
+} TRACER_OverFlowTypedef;
+/**
+  * @}
+  */
+
+
+/** @defgroup TRACER_EMB_Private_TypeDef EMB TRACER Private typedef
+  * @{
+  */
+ typedef enum {
+  TRACER_OK,
+  TRACER_KO
+} TRACER_StatusTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup TRACER_EMB_Private_TypeDef EMB TRACER Private typedef
+  * @{
+  */
+typedef struct  {
+  uint32_t PtrTx_Read;
+  uint32_t PtrTx_Write;
+  uint32_t SizeSent;
+  uint32_t LowPower_Counter;
+  volatile uint8_t Counter;
+  const uint8_t *OverFlow_Data;
+  uint8_t OverFlow_Size;
+  uint8_t discontinue;
+  TRACER_OverFlowTypedef OverFlow_Status;
+  uint8_t PtrDataTx[TRACER_EMB_BUFFER_SIZE];
+} TRACER_ContextTypedef;
+/**
+  * @}
+  */
+
+/* Private define ------------------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TRACER_EMB_Private_Macros TRACE Private Macros
+  * @{
+  */
+
+#define TRACER_WRITE_DATA(_POSITION_,_DATA_)  TracerContext.PtrDataTx[(_POSITION_)% TRACER_EMB_BUFFER_SIZE] = (_DATA_);  \
+                                             (_POSITION_) = ((_POSITION_) + 1u) % TRACER_EMB_BUFFER_SIZE;
+
+#define TRACER_ENTER_CRITICAL_SECTION()  uint32_t primask= __get_PRIMASK();\
+                                        __disable_irq();
+
+#define TRACER_LEAVE_CRITICAL_SECTION() __set_PRIMASK(primask)
+
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup TRACER_EMB_Private_Functions TRACE Private Functions
+  * @{
+  */
+uint32_t TRACER_CallbackRX(uint8_t character, uint8_t error);
+
+/* Function prototypes -----------------------------------------------*/
+uint8_t TRACER_EMB_ReadData(void);
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup TRACER_EMB_Private_Variables TRACE Private Variables
+  * @{
+  */
+static TRACER_ContextTypedef TracerContext;
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup TRACER_EMB_Exported_Functions
+  * @{
+  */
+void TRACER_EMB_Init(void)
+{
+  /* initialize the Ptr for Read/Write */
+  memset(&TracerContext, 0, sizeof(TRACER_ContextTypedef));
+  
+  /* Initialize trace BUS */
+  HW_TRACER_EMB_Init();
+  
+  /* Initialize the lowpower aspect */
+  TRACER_EMB_LowPowerInit();
+}
+
+void TRACER_EMB_Add(uint8_t *Ptr, uint32_t Size)
+{
+  int32_t _writepos;
+  uint8_t *data_to_write = Ptr;
+  uint32_t index;
+
+  /* Data processing */
+  TRACER_EMB_Lock();
+  _writepos = TRACER_EMB_AllocateBufer(Size);
+
+  /* if allocation is ok, write data into the bufffer */
+  if (_writepos  != -1)
+  {
+    /* initialize the Ptr for Read/Write */
+    for (index = 0u; index < Size; index++)
+    {
+      TRACER_WRITE_DATA(_writepos, data_to_write[index]);
+    }
+  }
+  TRACER_EMB_UnLock();
+  
+  /* Tx processing */
+  TRACER_EMB_SendData();
+}
+
+#if TRACER_EMB_DMA_MODE == 1UL
+void TRACER_EMB_IRQHandlerDMA(void)
+{
+  HW_TRACER_EMB_IRQHandlerDMA();
+}
+#endif
+
+void TRACER_EMB_IRQHandlerUSART(void)
+{
+  HW_TRACER_EMB_IRQHandlerUSART();
+}
+
+void TRACER_EMB_WriteData(uint16_t pos, uint8_t data)
+{
+  TracerContext.PtrDataTx[pos % TRACER_EMB_BUFFER_SIZE] = data;
+}
+
+void TRACER_EMB_StartRX(void (*callbackRX)(uint8_t, uint8_t))
+{
+  HW_TRACER_EMB_RegisterRxCallback(callbackRX);
+  HW_TRACER_EMB_StartRX();
+}
+
+int32_t TRACER_EMB_EnableOverFlow(const uint8_t *Data, uint8_t Size)
+{
+  if(Size != 0)
+  {
+    TracerContext.OverFlow_Data = Data;
+    TracerContext.OverFlow_Size = Size;
+    return 0;
+  }
+  return -1;
+}
+
+uint8_t TRACER_EMB_ReadData()
+{
+  return HW_TRACER_EMB_ReadData();
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup TRACER_EMB_Private_Functions TRACE Private Functions
+  * @{
+  */
+
+/**
+  * @brief  callback called to end a transfert.
+  * @param  None.
+  * @retval None.
+  */
+void TRACER_EMB_CALLBACK_TX(void)
+{
+  TRACER_ENTER_CRITICAL_SECTION();
+  TracerContext.PtrTx_Read = (TracerContext.PtrTx_Read + TracerContext.SizeSent) % TRACER_EMB_BUFFER_SIZE;
+  
+  if((TracerContext.OverFlow_Data != NULL) && (TracerContext.OverFlow_Status == TRACER_OVERFLOW_DETECTED)
+     && (TracerContext.discontinue == 0))
+  {
+    TracerContext.OverFlow_Status = TRACER_OVERFLOW_SENT;
+    HW_TRACER_EMB_SendData((uint8_t *)TracerContext.OverFlow_Data, TracerContext.OverFlow_Size);
+    TRACER_LEAVE_CRITICAL_SECTION();
+  }
+  else
+  {
+    TracerContext.LowPower_Counter--;
+    TRACER_LEAVE_CRITICAL_SECTION();
+    TRACER_EMB_UnLock();
+    TRACER_EMB_SendData();
+  }
+}
+
+/**
+  * @brief  Lock the trace buffer.
+  * @param  None.
+  * @retval None.
+  */
+void TRACER_EMB_Lock(void)
+{
+  TRACER_ENTER_CRITICAL_SECTION();
+  TracerContext.Counter++;
+  TRACER_LEAVE_CRITICAL_SECTION();
+}
+
+/**
+  * @brief  UnLock the trace buffer.
+  * @param  None.
+  * @retval None.
+  */
+void TRACER_EMB_UnLock(void)
+{
+  TRACER_ENTER_CRITICAL_SECTION();
+  TracerContext.Counter--;
+  TRACER_LEAVE_CRITICAL_SECTION();
+}
+
+/**
+  * @brief  if buffer is not locked return a Begin / end @ to transfert over the media.
+  * @param  address begin of the data
+  * @param  address end of the data
+  * @retval None.
+  */
+void TRACER_EMB_SendData(void)
+{
+  uint32_t _begin;
+  uint32_t _end;
+  
+  TRACER_ENTER_CRITICAL_SECTION();
+  
+  if (0u == TracerContext.Counter)
+  {
+    _begin = TracerContext.PtrTx_Read;
+    _end = TracerContext.PtrTx_Write;
+    
+    if (_begin != _end)
+    {
+      TRACER_EMB_Lock();
+      /*  */
+      if (_end > _begin)
+      {
+        TracerContext.SizeSent = _end - _begin;
+        TracerContext.discontinue = 0;
+      }
+      else  /* _begin > _end */
+      {
+        TracerContext.SizeSent = TRACER_EMB_BUFFER_SIZE - _begin;
+        TracerContext.discontinue = 1;
+      }
+      TRACER_EMB_LowPowerSendData();
+      TracerContext.LowPower_Counter++;
+      HW_TRACER_EMB_SendData(&(TracerContext.PtrDataTx[_begin]), TracerContext.SizeSent);
+    }
+  }
+  
+  /* Low power processing */
+  switch(TracerContext.LowPower_Counter)
+  {
+  case 1:
+    TRACER_EMB_LowPowerSendData();
+    break;
+  case 0 :
+    TRACER_EMB_LowPowerSendDataComplete();
+    break;
+  }
+  
+  TRACER_LEAVE_CRITICAL_SECTION();
+}
+
+/**
+  * @brief  allocate space inside the buffer to push data
+  * @param  data size
+  * @retval write position inside the buffer is -1 no space available.
+  */
+int32_t TRACER_EMB_AllocateBufer(uint32_t Size)
+{
+  uint32_t _freesize;
+  int32_t _pos = -1;
+
+  TRACER_ENTER_CRITICAL_SECTION();
+
+  if (TracerContext.PtrTx_Write == TracerContext.PtrTx_Read)
+  {
+    // need to add buffer full managment
+    _freesize = TRACER_EMB_BUFFER_SIZE;
+  }
+  else
+  {
+    if (TracerContext.PtrTx_Write > TracerContext.PtrTx_Read)
+    {
+      _freesize = TRACER_EMB_BUFFER_SIZE - TracerContext.PtrTx_Write + TracerContext.PtrTx_Read;
+    }
+    else
+    {
+      _freesize = TracerContext.PtrTx_Read - TracerContext.PtrTx_Write;
+    }
+  }
+
+  if (_freesize > Size)
+  {
+    _pos = (int32_t)TracerContext.PtrTx_Write;
+    TracerContext.PtrTx_Write = (TracerContext.PtrTx_Write + Size) % TRACER_EMB_BUFFER_SIZE;
+    if(TRACER_OVERFLOW_SENT == TracerContext.OverFlow_Status)
+      TracerContext.OverFlow_Status = TRACER_OVERFLOW_NONE;
+  }
+  else
+  {
+    if(TRACER_OVERFLOW_NONE == TracerContext.OverFlow_Status)
+      TracerContext.OverFlow_Status = TRACER_OVERFLOW_DETECTED;
+  }
+
+  TRACER_LEAVE_CRITICAL_SECTION();
+  return _pos;
+}
+
+__weak void TRACER_EMB_LowPowerInit(void)
+{
+}
+
+__weak void TRACER_EMB_LowPowerSendData(void)
+{
+}
+
+__weak void TRACER_EMB_LowPowerSendDataComplete(void)
+{
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb.h b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb.h
new file mode 100644
index 0000000..938ce92
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb.h
@@ -0,0 +1,147 @@
+/**
+  ******************************************************************************
+  * @file    trace_emb.h
+  * @author  MCD Application Team
+  * @brief   This file contains the headers of tracer_emb.h for Cable Attach-Detach
+  *          controls.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+#ifndef __TRACER_EMB_H_
+#define __TRACER_EMB_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stdint.h"
+#include "tracer_emb_conf.h"
+
+/** @addtogroup TRACER_EMB
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/* Exported define -----------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported variables --------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup TRACER_EMB_Exported_Functions TRACE Exported Functions
+  * @{
+  */
+/**
+  * @brief  Initialize the TRACE module
+  * @retval None
+  */
+void            TRACER_EMB_Init(void);
+
+/**
+  * @brief  Add information in debug trace buffer
+  * @param  Type    Trace Type based on @ref TRACER_EMB_EVENT
+  * @param  PortNum Port number value
+  * @param  Sop     SOP type
+  * @param  Ptr     Pointer on the data to send
+  * @param  Size    Size of the data to send
+  * @retval None.
+  */
+void            TRACER_EMB_Add(uint8_t *Ptr, uint32_t Size);
+
+/**
+  * @brief  Add one data into the trace buffer
+  * @param  pos position
+  * @param  data data value
+  */
+void TRACER_EMB_WriteData(uint16_t pos, uint8_t data);
+
+/**
+  * @brief  Lock the trace buffer.
+  * @param  None.
+  * @retval None.
+  */
+void TRACER_EMB_Lock(void);
+
+/**
+  * @brief  UnLock the trace buffer.
+  * @param  None.
+  * @retval None.
+  */
+void TRACER_EMB_UnLock(void);
+
+
+void TRACER_EMB_SendData(void);
+
+/**
+  * @brief  allocate space inside the buffer to push data
+  * @param  data size
+  * @retval write position inside the buffer is -1 no space available.
+  */
+int32_t TRACER_EMB_AllocateBufer(uint32_t Size);
+
+/**
+  * @brief  enable the overflow detection
+  * @param  Data pointer on the overflow string
+  * @param  Size of the overflow string
+  * @retval 0 if success other value indicate an error.
+  */
+int32_t TRACER_EMB_EnableOverFlow(const uint8_t *Data, uint8_t Size);
+
+
+void TRACER_EMB_CALLBACK_TX(void);
+
+#if TRACER_EMB_DMA_MODE == 1UL
+void TRACER_EMB_IRQHandlerDMA(void);
+#endif
+
+void TRACER_EMB_IRQHandlerUSART(void);
+
+
+void TRACER_EMB_StartRX(void (*callbackRX)(uint8_t, uint8_t));
+
+
+/**
+  * @brief  function to initialize LPM for emb tracer.
+  * @retval Timing
+  */
+void TRACER_EMB_LowPowerInit(void);
+
+/**
+  * @brief  function to manage LPM when sending data.
+  * @retval Timing
+  */
+void TRACER_EMB_LowPowerSendData(void);
+
+/**
+  * @brief  function to manage LPM when data send complete.
+  * @retval Timing
+  */
+void TRACER_EMB_LowPowerSendDataComplete(void);
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TRACER_EMB_H_ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_conf_template.h b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_conf_template.h
new file mode 100644
index 0000000..2ad1ae6
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_conf_template.h
@@ -0,0 +1,109 @@
+/**
+  ******************************************************************************
+  * @file    tracer_emb_conf.h
+  * @author  MCD Application Team
+  * @brief   This file contains the Trace HW related defines.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#ifndef TRACER_EMB_CONF_H
+#define TRACER_EMB_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32g0xx_ll_bus.h"
+#include "stm32g0xx_ll_dma.h"
+#include "stm32g0xx_ll_gpio.h"
+#include "stm32g0xx_ll_rcc.h"
+#include "stm32g0xx_ll_usart.h"
+#if defined(LPUART1)
+#include "stm32g0xx_ll_lpuart.h"
+#endif /* LPUART1 */
+/* Private typedef -----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------
+      Definitions for TRACE feature
+-------------------------------------------------------------------------------*/
+#define TRACER_EMB_BAUDRATE                          921600UL
+
+#define TRACER_EMB_DMA_MODE                          1UL
+#define TRACER_EMB_IT_MODE                           0UL
+
+#define TRACER_EMB_BUFFER_SIZE                       1024UL
+
+/* -----------------------------------------------------------------------------
+      Definitions for TRACE Hw information
+-------------------------------------------------------------------------------*/
+
+/* USART instance is used.*/
+#define TRACER_EMB_IS_INSTANCE_LPUART_TYPE           0UL /* set to 1UL if LPUART is used instead of USART */
+#define TRACER_EMB_USART_INSTANCE                    USART3
+
+#define TRACER_EMB_TX_GPIO                           GPIOC
+#define TRACER_EMB_TX_PIN                            LL_GPIO_PIN_10
+#define TRACER_EMB_TX_AF                             LL_GPIO_AF_0
+#define TRACER_EMB_TX_GPIO_ENABLE_CLOCK()            LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOC)
+#define TRACER_EMB_TX_GPIO_DISABLE_CLOCK()           LL_IOP_GRP1_DisableClock(LL_IOP_GRP1_PERIPH_GPIOC)
+#define TRACER_EMB_RX_GPIO                           GPIOC
+#define TRACER_EMB_RX_PIN                            LL_GPIO_PIN_11
+#define TRACER_EMB_RX_AF                             LL_GPIO_AF_0
+#define TRACER_EMB_RX_GPIO_ENABLE_CLOCK()            LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOC)
+#define TRACER_EMB_RX_GPIO_DISABLE_CLOCK()           LL_IOP_GRP1_DisableClock(LL_IOP_GRP1_PERIPH_GPIOC)
+
+#define TRACER_EMB_ENABLE_CLK_USART()                LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3)
+#define TRACER_EMB_DISABLE_CLK_USART()               LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_USART3)
+#define TRACER_EMB_SET_CLK_SOURCE_USART()            /* No need for clock source selection in case of USART3 // LL_RCC_SetUSARTClockSource(LL_RCC_USART3_CLKSOURCE_PCLK2) */
+#define TRACER_EMB_USART_IRQ                         USART3_4_LPUART1_IRQn
+#define TRACER_EMB_USART_IRQHANDLER                  USART3_4_LPUART1_IRQHandler
+#define TRACER_EMB_TX_AF_FUNCTION                    LL_GPIO_SetAFPin_8_15
+#define TRACER_EMB_RX_AF_FUNCTION                    LL_GPIO_SetAFPin_8_15
+#define TRACER_EMB_TX_IRQ_PRIORITY                   3
+#if TRACER_EMB_DMA_MODE == 1UL
+#define TRACER_EMB_DMA_INSTANCE                      DMA1
+#define TRACER_EMB_ENABLE_CLK_DMA()                  LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1)
+#if defined (DMAMUX_CxCR_DMAREQ_ID)
+#define TRACER_EMB_TX_DMA_REQUEST                    LL_DMAMUX_REQ_USART3_TX         /* This define is needed only in case of DMAMUX management */
+#endif  /* DMAMUX_CxCR_DMAREQ_ID */
+#if defined(DMA_SxCR_CHSEL)
+#define TRACER_EMB_TX_DMA_STREAM		     LL_DMA_STREAM_7                 /* This define is needed only in case of use of a DMA IP supporting Streams */
+#endif  /* DMA_SxCR_CHSEL */
+#define TRACER_EMB_TX_DMA_CHANNEL                    LL_DMA_CHANNEL_7
+#if defined(DMA_SxCR_CHSEL)
+/* Those defines are needed only in case of use of a DMA IP supporting Streams */
+#define TRACER_EMB_ENABLESTREAM                      LL_DMA_EnableStream
+#define TRACER_EMB_DISABLESTREAM                     LL_DMA_DisableStream
+#else
+/* Those defines are needed only in case of use of a DMA IP not supporting Streams */
+#define TRACER_EMB_ENABLECHANNEL                     LL_DMA_EnableChannel
+#define TRACER_EMB_DISABLECHANNEL                    LL_DMA_DisableChannel
+#endif  /* DMA_SxCR_CHSEL */
+#define TRACER_EMB_TX_DMA_IRQ                        DMA1_Ch4_7_DMAMUX1_OVR_IRQn
+#define TRACER_EMB_TX_DMA_IRQHANDLER                 DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler
+#define TRACER_EMB_TX_DMA_ACTIVE_FLAG                LL_DMA_IsActiveFlag_TC7
+#define TRACER_EMB_TX_DMA_CLEAR_FLAG                 LL_DMA_ClearFlag_GI7
+#define TRACER_EMB_TX_DMA_PRIORITY                   0
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* TRACER_EMB_CONF_H */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_hw.c b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_hw.c
new file mode 100644
index 0000000..051c2cc
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_hw.c
@@ -0,0 +1,623 @@
+/**
+  ******************************************************************************
+  * @file    tracer_emb_hw.c
+  * @author  MCD Application Team
+  * @brief   This file contains the low level interface to control trace system.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "tracer_emb.h"
+#include "tracer_emb_hw.h"
+
+#if TRACER_EMB_DMA_MODE == 1UL && TRACER_EMB_IT_MODE == 1UL
+#error "tracer emb hw please select DMA or IT mode"
+#endif
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private Defines -----------------------------------------------------------*/
+#if (TRACER_EMB_IS_INSTANCE_LPUART_TYPE == 1UL)
+
+/* LPUART entry point */
+#define TRACER_EMB_ENABLEDIRECTIONRX    LL_LPUART_EnableDirectionRx
+#define TRACER_EMB_RECEIVE_DATA8        LL_LPUART_ReceiveData8
+#define TRACER_EMB_TRANSMIT_DATA8       LL_LPUART_TransmitData8
+#define TRACER_EMB_DMA_GETREGADDR       LL_LPUART_DMA_GetRegAddr
+#define TRACER_EMB_ENABLEDMAREQ_TX      LL_LPUART_EnableDMAReq_TX
+
+#define TRACER_EMB_ENABLE_IT_RXNE       LL_LPUART_EnableIT_RXNE
+#define TRACER_EMB_ENABLE_IT_ERROR      LL_LPUART_EnableIT_ERROR
+#define TRACER_EMB_ENABLE_IT_TXE        LL_LPUART_EnableIT_TXE
+#define TRACER_EMB_ENABLE_IT_TC         LL_LPUART_EnableIT_TC
+
+#define TRACER_EMB_DISABLEIT_TXE        LL_LPUART_DisableIT_TXE
+#define TRACER_EMB_DISABLEIT_TC         LL_LPUART_DisableIT_TC
+
+#define TRACER_EMB_ISACTIVEFLAG_TXE     LL_LPUART_IsActiveFlag_TXE
+#define TRACER_EMB_ISACTIVEFLAG_PE      LL_LPUART_IsActiveFlag_PE
+#define TRACER_EMB_ISACTIVEFLAG_RXNE    LL_LPUART_IsActiveFlag_RXNE
+#define TRACER_EMB_ISACTIVEFLAG_FE      LL_LPUART_IsActiveFlag_FE
+#define TRACER_EMB_ISACTIVEFLAG_ORE     LL_LPUART_IsActiveFlag_ORE
+#define TRACER_EMB_ISACTIVEFLAG_NE      LL_LPUART_IsActiveFlag_NE
+#define TRACER_EMB_ISACTIVEFLAG_TC      LL_LPUART_IsActiveFlag_TC
+
+#define TRACER_EMB_ISENABLEDIT_TXE      LL_LPUART_IsEnabledIT_TXE
+#define TRACER_EMB_ISENABLEDIT_RXNE     LL_LPUART_IsEnabledIT_RXNE
+#define TRACER_EMB_ISENABLEDIT_PE       LL_LPUART_IsEnabledIT_PE
+#define TRACER_EMB_ISENABLEDIT_ERROR    LL_LPUART_IsEnabledIT_ERROR
+#define TRACER_EMB_ISENABLEDIT_TC       LL_LPUART_IsEnabledIT_TC
+
+#define TRACER_EMB_CLEARFLAG_PE         LL_LPUART_ClearFlag_PE
+#define TRACER_EMB_CLEARFLAG_FE         LL_LPUART_ClearFlag_FE
+#define TRACER_EMB_CLEARFLAG_ORE        LL_LPUART_ClearFlag_ORE
+#define TRACER_EMB_CLEARFLAG_NE         LL_LPUART_ClearFlag_NE
+#define TRACER_EMB_CLEARFLAG_TC         LL_LPUART_ClearFlag_TC
+
+#define TRACER_EMB_READREG              LL_LPUART_ReadReg
+
+#else
+
+/* UART entry point */
+#define TRACER_EMB_ENABLEDIRECTIONRX    LL_USART_EnableDirectionRx
+#define TRACER_EMB_RECEIVE_DATA8        LL_USART_ReceiveData8
+#define TRACER_EMB_TRANSMIT_DATA8       LL_USART_TransmitData8
+#define TRACER_EMB_DMA_GETREGADDR       LL_USART_DMA_GetRegAddr
+#define TRACER_EMB_ENABLEDMAREQ_TX      LL_USART_EnableDMAReq_TX
+
+#define TRACER_EMB_ENABLE_IT_RXNE       LL_USART_EnableIT_RXNE
+#define TRACER_EMB_ENABLE_IT_ERROR      LL_USART_EnableIT_ERROR
+#define TRACER_EMB_ENABLE_IT_TXE        LL_USART_EnableIT_TXE
+#define TRACER_EMB_ENABLE_IT_TC         LL_USART_EnableIT_TC
+
+#define TRACER_EMB_DISABLEIT_TXE        LL_USART_DisableIT_TXE
+#define TRACER_EMB_DISABLEIT_TC         LL_USART_DisableIT_TC
+
+#define TRACER_EMB_ISACTIVEFLAG_TXE     LL_USART_IsActiveFlag_TXE
+#define TRACER_EMB_ISACTIVEFLAG_PE      LL_USART_IsActiveFlag_PE
+#define TRACER_EMB_ISACTIVEFLAG_RXNE    LL_USART_IsActiveFlag_RXNE
+#define TRACER_EMB_ISACTIVEFLAG_FE      LL_USART_IsActiveFlag_FE
+#define TRACER_EMB_ISACTIVEFLAG_ORE     LL_USART_IsActiveFlag_ORE
+#define TRACER_EMB_ISACTIVEFLAG_NE      LL_USART_IsActiveFlag_NE
+#define TRACER_EMB_ISACTIVEFLAG_TC      LL_USART_IsActiveFlag_TC
+#define TRACER_EMB_ISACTIVEFLAG_RTO     LL_USART_IsActiveFlag_RTO
+
+#define TRACER_EMB_ISENABLEDIT_TXE      LL_USART_IsEnabledIT_TXE
+#define TRACER_EMB_ISENABLEDIT_RXNE     LL_USART_IsEnabledIT_RXNE
+#define TRACER_EMB_ISENABLEDIT_PE       LL_USART_IsEnabledIT_PE
+#define TRACER_EMB_ISENABLEDIT_ERROR    LL_USART_IsEnabledIT_ERROR
+#define TRACER_EMB_ISENABLEDIT_TC       LL_USART_IsEnabledIT_TC
+#define TRACER_EMB_ISENABLEDIT_RTO      LL_USART_IsEnabledIT_RTO
+
+#define TRACER_EMB_CLEARFLAG_PE         LL_USART_ClearFlag_PE
+#define TRACER_EMB_CLEARFLAG_FE         LL_USART_ClearFlag_FE
+#define TRACER_EMB_CLEARFLAG_ORE        LL_USART_ClearFlag_ORE
+#define TRACER_EMB_CLEARFLAG_NE         LL_USART_ClearFlag_NE
+#define TRACER_EMB_CLEARFLAG_TC         LL_USART_ClearFlag_TC
+#define TRACER_EMB_CLEARFLAG_RTO        LL_USART_ClearFlag_RTO
+
+#define TRACER_EMB_READREG              LL_USART_ReadReg
+
+#endif
+
+#if defined(USART_ISR_RXNE_RXFNE)
+#define TRACER_EMB_FLAG_RXNE            USART_ISR_RXNE_RXFNE
+#elif defined(USART_ISR_RXNE)
+#define TRACER_EMB_FLAG_RXNE            USART_ISR_RXNE
+#else
+#define TRACER_EMB_FLAG_RXNE            USART_SR_RXNE
+#endif  /* USART_ISR_RXNE_RXFNE */
+#if defined(USART_CR1_TXEIE_TXFNFIE)
+#define TRACER_EMB_FLAG_TXE             USART_CR1_TXEIE_TXFNFIE
+#elif defined(USART_ISR_TXE)
+#define TRACER_EMB_FLAG_TXE             USART_ISR_TXE
+#else
+#define TRACER_EMB_FLAG_TXE             USART_SR_TXE
+#endif  /* USART_CR1_TXEIE_TXFNFIE */
+#if defined(USART_ISR_PE)
+#define TRACER_EMB_FLAG_PE              USART_ISR_PE
+#define TRACER_EMB_FLAG_FE              USART_ISR_FE
+#define TRACER_EMB_FLAG_ORE             USART_ISR_ORE
+#define TRACER_EMB_FLAG_NE              USART_ISR_NE
+#define TRACER_EMB_FLAG_TC              USART_ISR_TC
+#else
+#define TRACER_EMB_FLAG_PE              USART_SR_PE
+#define TRACER_EMB_FLAG_FE              USART_SR_FE
+#define TRACER_EMB_FLAG_ORE             USART_SR_ORE
+#define TRACER_EMB_FLAG_NE              USART_SR_NE
+#define TRACER_EMB_FLAG_TC              USART_SR_TC
+#endif  /* USART_ISR_RXNE_RXFNE */
+
+/* Private Variables ---------------------------------------------------------*/
+static void (*fptr_rx)(uint8_t, uint8_t) = NULL;
+#if TRACER_EMB_IT_MODE == 1UL
+  uint8_t *txData = NULL;
+  uint32_t txSize = 0;
+#endif
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/**
+  * @brief  Trace init
+  * @param  callbackTX
+  * @param  callbackRX
+  * @retval none
+  */
+void HW_TRACER_EMB_Init(void)
+{
+  /* Enable the peripheral clock of GPIO Port */
+  TRACER_EMB_TX_GPIO_ENABLE_CLOCK();
+  TRACER_EMB_RX_GPIO_ENABLE_CLOCK();
+
+  /* Configure Tx Pin as : Alternate function, High Speed, Push pull, Pull up */
+  TRACER_EMB_TX_AF_FUNCTION(TRACER_EMB_TX_GPIO, TRACER_EMB_TX_PIN, TRACER_EMB_TX_AF);
+  LL_GPIO_SetPinMode(TRACER_EMB_TX_GPIO, TRACER_EMB_TX_PIN, LL_GPIO_MODE_ALTERNATE);
+  LL_GPIO_SetPinSpeed(TRACER_EMB_TX_GPIO, TRACER_EMB_TX_PIN, LL_GPIO_SPEED_FREQ_HIGH);
+  LL_GPIO_SetPinOutputType(TRACER_EMB_TX_GPIO, TRACER_EMB_TX_PIN, LL_GPIO_OUTPUT_PUSHPULL);
+  LL_GPIO_SetPinPull(TRACER_EMB_TX_GPIO, TRACER_EMB_TX_PIN, LL_GPIO_PULL_UP);
+
+  /* Configure Rx Pin as : Alternate function, High Speed, Push pull, Pull up */
+  TRACER_EMB_RX_AF_FUNCTION(TRACER_EMB_RX_GPIO, TRACER_EMB_RX_PIN, TRACER_EMB_RX_AF);
+  LL_GPIO_SetPinMode(TRACER_EMB_RX_GPIO, TRACER_EMB_RX_PIN, LL_GPIO_MODE_ALTERNATE);
+  LL_GPIO_SetPinSpeed(TRACER_EMB_RX_GPIO, TRACER_EMB_RX_PIN, LL_GPIO_SPEED_FREQ_HIGH);
+  LL_GPIO_SetPinOutputType(TRACER_EMB_RX_GPIO, TRACER_EMB_RX_PIN, LL_GPIO_OUTPUT_PUSHPULL);
+  LL_GPIO_SetPinPull(TRACER_EMB_RX_GPIO, TRACER_EMB_RX_PIN, LL_GPIO_PULL_UP);
+
+  /* Enable the peripheral clock for USART */
+  TRACER_EMB_ENABLE_CLK_USART();
+
+  /* Set clock source */
+  TRACER_EMB_SET_CLK_SOURCE_USART();
+
+
+  if(IS_USART_INSTANCE(TRACER_EMB_USART_INSTANCE))
+  {
+    /* Configure USART */
+
+    LL_USART_InitTypeDef usart_initstruct;
+
+    /* Disable USART prior modifying configuration registers */
+    LL_USART_Disable(TRACER_EMB_USART_INSTANCE);
+
+
+    /* Set fields of initialization structure                   */
+    /*  - Prescaler           : LL_USART_PRESCALER_DIV1         */
+    /*  - BaudRate            : TRACE_BAUDRATE                  */
+    /*  - DataWidth           : LL_USART_DATAWIDTH_8B           */
+    /*  - StopBits            : LL_USART_STOPBITS_1             */
+    /*  - Parity              : LL_USART_PARITY_NONE            */
+    /*  - TransferDirection   : LL_USART_DIRECTION_TX           */
+    /*  - HardwareFlowControl : LL_USART_HWCONTROL_NONE         */
+    /*  - OverSampling        : LL_USART_OVERSAMPLING_16        */
+#if defined(USART_PRESC_PRESCALER)
+    usart_initstruct.PrescalerValue      = LL_USART_PRESCALER_DIV1;
+#endif
+    usart_initstruct.BaudRate            = TRACER_EMB_BAUDRATE;
+    usart_initstruct.DataWidth           = LL_USART_DATAWIDTH_8B;
+    usart_initstruct.StopBits            = LL_USART_STOPBITS_1;
+    usart_initstruct.Parity              = LL_USART_PARITY_NONE;
+    usart_initstruct.TransferDirection   = LL_USART_DIRECTION_TX;
+    usart_initstruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+    usart_initstruct.OverSampling        = LL_USART_OVERSAMPLING_16;
+
+    /* Initialize USART instance according to parameters defined in initialization structure */
+    LL_USART_Init(TRACER_EMB_USART_INSTANCE, &usart_initstruct);
+
+    LL_USART_Enable(TRACER_EMB_USART_INSTANCE);
+
+#if defined(USART_ISR_TEACK)
+    uint32_t _temp1 = LL_USART_IsActiveFlag_TEACK(TRACER_EMB_USART_INSTANCE);
+    /* Polling USART initialisation */
+    while(0u == _temp1)
+    {
+      _temp1 = LL_USART_IsActiveFlag_TEACK(TRACER_EMB_USART_INSTANCE);
+    }
+#endif /* USART_ISR_TEACK */
+  }
+#if (TRACER_EMB_IS_INSTANCE_LPUART_TYPE == 1UL)
+  else
+  {
+    /* Configure USART */
+    LL_LPUART_InitTypeDef lpuart_initstruct;
+
+    /* Disable USART prior modifying configuration registers */
+    LL_LPUART_Disable(TRACER_EMB_USART_INSTANCE);
+
+
+    /* Set fields of initialization structure                   */
+    /*  - Prescaler           : LL_USART_PRESCALER_DIV1         */
+    /*  - BaudRate            : TRACE_BAUDRATE                  */
+    /*  - DataWidth           : LL_USART_DATAWIDTH_8B           */
+    /*  - StopBits            : LL_USART_STOPBITS_1             */
+    /*  - Parity              : LL_USART_PARITY_NONE            */
+    /*  - TransferDirection   : LL_USART_DIRECTION_TX           */
+    /*  - HardwareFlowControl : LL_USART_HWCONTROL_NONE         */
+    /*  - OverSampling        : LL_USART_OVERSAMPLING_16        */
+#if defined(USART_PRESC_PRESCALER)
+    lpuart_initstruct.PrescalerValue      = LL_USART_PRESCALER_DIV1;
+#endif
+    lpuart_initstruct.BaudRate            = TRACER_EMB_BAUDRATE;
+    lpuart_initstruct.DataWidth           = LL_USART_DATAWIDTH_8B;
+    lpuart_initstruct.StopBits            = LL_USART_STOPBITS_1;
+    lpuart_initstruct.Parity              = LL_USART_PARITY_NONE;
+    lpuart_initstruct.TransferDirection   = LL_USART_DIRECTION_TX;
+    lpuart_initstruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+
+    /* Initialize USART instance according to parameters defined in initialization structure */
+    LL_LPUART_Init(TRACER_EMB_USART_INSTANCE, &lpuart_initstruct);
+
+    LL_LPUART_Enable(TRACER_EMB_USART_INSTANCE);
+
+    uint32_t _temp1 = LL_LPUART_IsActiveFlag_TEACK(TRACER_EMB_USART_INSTANCE);
+    /* Polling USART initialisation */
+    while(0u == _temp1)
+    {
+      _temp1 = LL_LPUART_IsActiveFlag_TEACK(TRACER_EMB_USART_INSTANCE);
+    }
+  }
+#endif
+
+#if TRACER_EMB_DMA_MODE == 1UL
+  /* Configure TX DMA */
+  TRACER_EMB_ENABLE_CLK_DMA();
+
+  /* (3) Configure the DMA functional parameters for transmission */
+#if defined(GPDMA1)
+  LL_DMA_ConfigDataTransfer(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL,
+                            LL_DMA_SINC_INCREMENT         |
+                            LL_DMA_DINC_NOINCREMENT       |
+                            LL_DMA_SRC_DATAWIDTH_BYTE     |
+                            LL_DMA_DEST_DATAWIDTH_BYTE);
+
+  LL_DMA_SetHardwareRequest(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL, TRACER_EMB_TX_DMA_REQUEST);
+  
+#elif defined(DMA_SxCR_CHSEL)
+  LL_DMA_SetChannelSelection(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM, TRACER_EMB_TX_DMA_CHANNEL);
+  LL_DMA_ConfigTransfer(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM,
+                        LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
+                        LL_DMA_PRIORITY_HIGH              |
+                        LL_DMA_MODE_NORMAL                |
+                        LL_DMA_PERIPH_NOINCREMENT         |
+                        LL_DMA_MEMORY_INCREMENT           |
+                        LL_DMA_PDATAALIGN_BYTE            |
+                        LL_DMA_MDATAALIGN_BYTE);
+#else
+  LL_DMA_ConfigTransfer(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL,
+                        LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
+                        LL_DMA_PRIORITY_HIGH              |
+                        LL_DMA_MODE_NORMAL                |
+                        LL_DMA_PERIPH_NOINCREMENT         |
+                        LL_DMA_MEMORY_INCREMENT           |
+                        LL_DMA_PDATAALIGN_BYTE            |
+                        LL_DMA_MDATAALIGN_BYTE);
+
+#if defined(DMAMUX_CxCR_DMAREQ_ID)
+  LL_DMA_SetPeriphRequest(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL, TRACER_EMB_TX_DMA_REQUEST);
+#endif
+
+#endif /* GPDMA1 */
+
+#if defined(DMA_SxCR_CHSEL)
+  LL_DMA_EnableIT_TC(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM);
+#else
+  LL_DMA_EnableIT_TC(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL);
+#endif /* DMA_SxCR_CHSEL */
+
+#endif
+
+  /* Configure the interrupt for TX */
+#if TRACER_EMB_DMA_MODE == 1UL
+#ifdef TRACER_EMB_TX_DMA_PRIORITY
+  NVIC_SetPriority(TRACER_EMB_TX_DMA_IRQ, TRACER_EMB_TX_DMA_PRIORITY);
+  NVIC_EnableIRQ(TRACER_EMB_TX_DMA_IRQ);
+#else
+  NVIC_SetPriority(TRACER_EMB_TX_DMA_IRQ, 0);
+  NVIC_EnableIRQ(TRACER_EMB_TX_DMA_IRQ);
+#endif
+#endif
+#ifdef TRACER_EMB_TX_IRQ_PRIORITY
+  NVIC_SetPriority(TRACER_EMB_USART_IRQ, TRACER_EMB_TX_IRQ_PRIORITY);
+  NVIC_EnableIRQ(TRACER_EMB_USART_IRQ);
+#else
+  NVIC_SetPriority(TRACER_EMB_USART_IRQ, 3);
+  NVIC_EnableIRQ(TRACER_EMB_USART_IRQ);
+#endif
+
+  /* Disable the UART */
+  if(NULL == fptr_rx)
+  {
+    TRACER_EMB_DISABLE_CLK_USART();
+  }
+  return;
+}
+
+/**
+  * @brief  Trace Deinit
+  * @retval none
+  */
+void HW_TRACER_EMB_DeInit(void)
+{
+  TRACER_EMB_DISABLE_CLK_USART();
+  return;
+}
+
+/**
+  * @brief  Allow to update the RX callback
+  * @param  callbackRX
+  * @retval none
+  */
+void HW_TRACER_EMB_RegisterRxCallback(void (*callbackRX)(uint8_t, uint8_t))
+{
+  fptr_rx = callbackRX;
+  TRACER_EMB_ENABLE_CLK_USART();
+}
+
+/**
+  * @brief  Start RX reception only when OSKernel have been started
+  * @retval none
+  */
+void HW_TRACER_EMB_StartRX(void)
+{
+  /* Enable USART IT for RX */
+  TRACER_EMB_ENABLE_IT_RXNE(TRACER_EMB_USART_INSTANCE);
+  TRACER_EMB_ENABLE_IT_ERROR(TRACER_EMB_USART_INSTANCE);
+
+  /* Enable RX/TX */
+  TRACER_EMB_ENABLEDIRECTIONRX(TRACER_EMB_USART_INSTANCE);
+
+  /* Configure the interrupt for RX */
+  NVIC_SetPriority(TRACER_EMB_USART_IRQ, 3);
+  NVIC_EnableIRQ(TRACER_EMB_USART_IRQ);
+}
+
+#if TRACER_EMB_DMA_MODE == 1UL
+/**
+  * @brief  Function to handle reception in DMA mode
+  * @retval none
+  */
+void HW_TRACER_EMB_IRQHandlerDMA(void)
+{
+  if (1UL == TRACER_EMB_TX_DMA_ACTIVE_FLAG(TRACER_EMB_DMA_INSTANCE))
+  {
+    TRACER_EMB_ENABLE_IT_TC(TRACER_EMB_USART_INSTANCE);
+    TRACER_EMB_TX_DMA_CLEAR_FLAG(TRACER_EMB_DMA_INSTANCE);
+  }
+}
+#endif
+
+/**
+  * @brief  USART/LPUART IRQ Handler
+  * @retval none
+  */
+void HW_TRACER_EMB_IRQHandlerUSART(void)
+{
+  uint32_t _temp1, _temp2;
+  uint32_t _isrflags;
+  uint32_t _errorflags;
+  uint8_t _error = 0U;
+
+  /* Load ISR in local variable */
+#if defined(USART_ISR_TC)
+  _isrflags = TRACER_EMB_READREG(TRACER_EMB_USART_INSTANCE, ISR);
+#else
+  _isrflags = TRACER_EMB_READREG(TRACER_EMB_USART_INSTANCE, SR);
+#endif  /* USART_ISR_TC */
+
+  /* Ready to read received char if any */
+  _temp1 = TRACER_EMB_ISENABLEDIT_RXNE(TRACER_EMB_USART_INSTANCE);
+
+  /* If Reception is ongoing */
+  if (1UL == _temp1)
+  {
+    /* Reception is active : check if new byte is received */
+    __IO uint32_t received_char;
+
+    _errorflags = ((_isrflags) & (TRACER_EMB_FLAG_PE | TRACER_EMB_FLAG_FE | TRACER_EMB_FLAG_NE | TRACER_EMB_FLAG_ORE));
+
+    /* Check if RXNE flag is set : new byte is stored in DR */
+    if (  ((TRACER_EMB_FLAG_RXNE) == ((_isrflags) & (TRACER_EMB_FLAG_RXNE)))
+        &&(0UL == _errorflags) )
+    {
+      /* Read Received character. RXNE flag is cleared by reading of RDR register */
+      received_char = TRACER_EMB_RECEIVE_DATA8(TRACER_EMB_USART_INSTANCE);
+
+      if (fptr_rx != NULL)
+      {
+        fptr_rx(received_char, 0U);
+      }
+      return;
+    }
+    else if (0UL != _errorflags)
+    {
+      /* Error has been detected */
+
+      /* Check if RXNE flag is set : new byte is stored in DR */
+      if ((TRACER_EMB_FLAG_RXNE) == ((_isrflags) & (TRACER_EMB_FLAG_RXNE)))
+      {
+        /* Read Received character. RXNE flag is cleared by reading of RDR register */
+        received_char = TRACER_EMB_RECEIVE_DATA8(TRACER_EMB_USART_INSTANCE);
+
+        if (fptr_rx != NULL)
+        {
+          fptr_rx(received_char, 0U);
+        }
+        return;
+      }
+
+      /* Parity error    */
+      _temp2 = TRACER_EMB_ISENABLEDIT_PE(TRACER_EMB_USART_INSTANCE);
+      if (  (1U == _temp2)
+          &&(TRACER_EMB_FLAG_PE == ((_errorflags) & (TRACER_EMB_FLAG_PE))) )
+      {
+        /* Flags clearing */
+        TRACER_EMB_CLEARFLAG_PE(TRACER_EMB_USART_INSTANCE);
+        _error = 1U;
+      }
+
+      /* Generic Errors*/
+      _temp2 = TRACER_EMB_ISENABLEDIT_ERROR(TRACER_EMB_USART_INSTANCE);
+      if (1U == _temp2)
+      {
+        /* Framing error   */
+        if (TRACER_EMB_FLAG_FE == ((_errorflags) & (TRACER_EMB_FLAG_FE)))
+        {
+          /* Flags clearing */
+          TRACER_EMB_CLEARFLAG_FE(TRACER_EMB_USART_INSTANCE);
+          _error = 1U;
+        }
+
+        /* Overrun error   */
+        if (TRACER_EMB_FLAG_ORE == ((_errorflags) & (TRACER_EMB_FLAG_ORE)))
+        {
+          /* Flags clearing */
+          TRACER_EMB_CLEARFLAG_ORE(TRACER_EMB_USART_INSTANCE);
+          _error = 1U;
+        }
+
+        /* Noise detection */
+        if (TRACER_EMB_FLAG_NE == ((_errorflags) & (TRACER_EMB_FLAG_NE)))
+        {
+          /* Flags clearing */
+          TRACER_EMB_CLEARFLAG_NE(TRACER_EMB_USART_INSTANCE);
+          _error = 1U;
+        }
+      }
+
+      if ((1U == _error) && (fptr_rx != NULL))
+      {
+        fptr_rx(1U, 1U);  /* 1 indicate a reception error */
+      }
+    }
+    else
+    {
+      /* no error, no reception */
+    }
+  }
+
+#if TRACER_EMB_IT_MODE == 1UL
+  /* Ready to handle TXE interrupt */
+  _temp2 = TRACER_EMB_ISENABLEDIT_TXE(TRACER_EMB_USART_INSTANCE);
+  if (((TRACER_EMB_FLAG_TXE) == ((_isrflags) & (TRACER_EMB_FLAG_TXE))) && (1UL == _temp2))
+  {
+    /* Write data inside the data register */
+    TRACER_EMB_TRANSMIT_DATA8(TRACER_EMB_USART_INSTANCE, *txData);
+    txData++;
+    txSize--;
+    if (txSize == 0)
+    {
+      TRACER_EMB_DISABLEIT_TXE(TRACER_EMB_USART_INSTANCE);
+
+      if(NULL == fptr_rx)
+      {
+        TRACER_EMB_DISABLE_CLK_USART();
+      }
+
+      TRACER_EMB_CALLBACK_TX();
+    }
+  }
+#endif
+
+#if  (TRACER_EMB_DMA_MODE == 1UL)
+  /* Ready to handle TC interrupt */
+  _temp2 = TRACER_EMB_ISENABLEDIT_TC(TRACER_EMB_USART_INSTANCE);
+  if (((TRACER_EMB_FLAG_TC) == ((_isrflags) & (TRACER_EMB_FLAG_TC))) && (1UL == _temp2))
+  {
+    TRACER_EMB_DISABLEIT_TC(TRACER_EMB_USART_INSTANCE);
+    TRACER_EMB_CLEARFLAG_TC(TRACER_EMB_USART_INSTANCE);
+#if defined(DMA_SxCR_CHSEL)
+    TRACER_EMB_DISABLESTREAM(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM);
+#else
+    TRACER_EMB_DISABLECHANNEL(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL);
+#endif /* DMA_SxCR_CHSEL */
+    if(NULL == fptr_rx)
+    {
+      TRACER_EMB_DISABLE_CLK_USART();
+    }
+    /* call the callback */
+    TRACER_EMB_CALLBACK_TX();
+  }
+#endif
+
+}
+
+/**
+  * @brief  USART/LPUART send data
+  * @param data pointer
+  * @param data size
+  * @retval none
+  */
+void HW_TRACER_EMB_SendData(uint8_t *pData, uint32_t Size)
+{
+  /* enable the USART */
+  TRACER_EMB_ENABLE_CLK_USART();
+
+#if TRACER_EMB_DMA_MODE == 1UL
+#if defined(GPDMA1)
+  LL_DMA_ConfigAddrs(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL,
+                     (uint32_t)pData,
+                     TRACER_EMB_DMA_GETREGADDR(TRACER_EMB_USART_INSTANCE, LL_USART_DMA_REG_DATA_TRANSMIT));
+  LL_DMA_SetBlkDataLength(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL, Size);
+
+  /* Enable DMA TX Interrupt */
+  TRACER_EMB_ENABLEDMAREQ_TX(TRACER_EMB_USART_INSTANCE);
+
+  /* Enable DMA Channel Tx */
+  LL_DMA_EnableChannel(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL);
+  TRACER_EMB_ENABLECHANNEL(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL);
+#elif defined(DMA_SxCR_CHSEL)
+  LL_DMA_ConfigAddresses(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM,
+                         (uint32_t)pData,
+                         TRACER_EMB_DMA_GETREGADDR(TRACER_EMB_USART_INSTANCE),
+                         LL_DMA_GetDataTransferDirection(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM));
+  LL_DMA_SetDataLength(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM, Size);
+
+  /* Enable DMA TX Interrupt */
+  TRACER_EMB_ENABLEDMAREQ_TX(TRACER_EMB_USART_INSTANCE);
+
+  /* Enable DMA Channel Tx */
+  TRACER_EMB_ENABLESTREAM(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_STREAM);
+#else
+  LL_DMA_ConfigAddresses(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL,
+                         (uint32_t)pData,
+                         TRACER_EMB_DMA_GETREGADDR(TRACER_EMB_USART_INSTANCE, LL_USART_DMA_REG_DATA_TRANSMIT),
+                         LL_DMA_GetDataTransferDirection(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL));
+  LL_DMA_SetDataLength(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL, Size);
+
+  /* Enable DMA TX Interrupt */
+  TRACER_EMB_ENABLEDMAREQ_TX(TRACER_EMB_USART_INSTANCE);
+
+  /* Enable DMA Channel Tx */
+  TRACER_EMB_ENABLECHANNEL(TRACER_EMB_DMA_INSTANCE, TRACER_EMB_TX_DMA_CHANNEL);
+#endif /* GPDMA1 */
+#endif
+
+#if TRACER_EMB_IT_MODE == 1UL
+  /* keep information about the data to transfert */
+  txData = pData;
+  txSize = Size;
+
+  /* Enable the TXEIE */
+  TRACER_EMB_ENABLE_IT_TXE(TRACER_EMB_USART_INSTANCE);
+#endif
+}
+
+/**
+  * @brief  USART/LPUART read data
+  * @retval return a data
+  */
+uint8_t HW_TRACER_EMB_ReadData(void)
+{
+  return TRACER_EMB_RECEIVE_DATA8(TRACER_EMB_USART_INSTANCE);
+}
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_hw.h b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_hw.h
new file mode 100644
index 0000000..b30cd34
--- /dev/null
+++ b/USB-PD_Provider_1port/Utilities/TRACER_EMB/tracer_emb_hw.h
@@ -0,0 +1,47 @@
+/**
+  ******************************************************************************
+  * @file    usbpd_bsp_trace.h
+  * @author  MCD Application Team
+  * @brief   This file contains bsp interface control functions.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+#ifndef HW_TRACE_H
+#define HW_TRACE_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+
+/* Exported functions ---------------------------------------------------------*/
+
+void  HW_TRACER_EMB_Init(void);
+void  HW_TRACER_EMB_DeInit(void);
+void  HW_TRACER_EMB_RegisterRxCallback(void (*callbackRX)(uint8_t, uint8_t));
+#if TRACER_EMB_DMA_MODE == 1UL
+void  HW_TRACER_EMB_IRQHandlerDMA(void);
+#endif
+void  HW_TRACER_EMB_IRQHandlerUSART(void);
+void  HW_TRACER_EMB_StartRX(void);
+void  HW_TRACER_EMB_SendData(uint8_t *data, uint32_t size);
+uint8_t HW_TRACER_EMB_ReadData(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HW_TRACE_H */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/USB-PD_Provider_1port/readme.txt b/USB-PD_Provider_1port/readme.txt
new file mode 100644
index 0000000..cb726d3
--- /dev/null
+++ b/USB-PD_Provider_1port/readme.txt
@@ -0,0 +1,99 @@
+/**
+  @page USB-PD_Provider_1port USBPD provider example
+ 
+  @verbatim
+  ******************************************************************************
+  * @file    USB-PD/USB-PD_Provider_1port/readme.txt
+  * @author  MCD Application Team
+  * @brief   Description of the consumer example.
+  ******************************************************************************
+  *
+  * Copyright (c) 2020 STMicroelectronics. All rights reserved.
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                               www.st.com/SLA0044
+  *
+  ******************************************************************************
+  @endverbatim
+
+@par Application Description
+
+How to create a simple type C provider.
+
+This application initialize the type C port 1 in source mode with only one PDO at 5V.
+
+Connect UCPD cube Monitor on the VCP associated to our board (only available if USB cable is connected)
+The UCPD Cube Monitor will be used to trace all the messages exchange between the ports partner.  
+  
+@note Care must be taken when using HAL_Delay(), this function provides accurate
+      delay (in milliseconds) based on variable incremented in HAL time base ISR.
+      This implies that if HAL_Delay() is called from a peripheral ISR process, then
+      the HAL time base interrupt must have higher priority (numerically lower) than
+      the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+      To change the HAL time base interrupt priority you have to use HAL_NVIC_SetPriority()
+      function.
+ 
+@note The application needs to ensure that the HAL time base is always set to 1 millisecond
+      to have correct HAL operation.
+
+@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set accordingly to the 
+      OS resources memory requirements of the application with +10% margin and rounded to the upper Kbyte boundary.
+
+For more details about FreeRTOS implementation on STM32Cube, please refer to UM1722 "Developing Applications 
+on STM32Cube with RTOS".
+
+@par Keywords
+
+USB_PD_Lib, UCPD, Type C, USBPD, FreeRTOS
+
+@par Directory contents
+    - USB-PD/USB-PD_Provider_1port/Src/main.c                       Main program file
+    - USB-PD/USB-PD_Provider_1port/Src/app_FreeRTOS.c               Code for freertos applications file 
+    - USB-PD/USB-PD_Provider_1port/Src/stm32g0xx_hal_msp.c          MSP Initialization file 
+    - USB-PD/USB-PD_Provider_1port/Src/stm32g0xx_it.c               Interrupt handlers file
+    - USB-PD/USB-PD_Provider_1port/Src/system_stm32g0xx.c           STM32G0xx system clock configuration file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd.c                      Ucpd init file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_dpm_core.c             device policy manager core file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_dpm_users.c            device policy manager users file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_pwr_if.c               power if management file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_pwr_user.c             power management file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_vdm_users.c            user vendor define message management file
+    - USB-PD/USB-PD_Provider_1port/Inc/FreeRTOSConfig.h             FreeRTOS Configuration file
+    - USB-PD/USB-PD_Provider_1port/Inc/main.h                       Main program header file
+    - USB-PD/USB-PD_Provider_1port/Inc/stm32_assert.h               assert program header file
+    - USB-PD/USB-PD_Provider_1port/Inc/stm32g0xx_hal_conf.h         HAL Library Configuration file
+    - USB-PD/USB-PD_Provider_1port/Inc/stm32g0xx_it.h               Interrupt handlers header file
+    - USB-PD/USB-PD_Provider_1port/Inc/main.h                       Main program header file
+    - USB-PD/USB-PD_Provider_1port/Inc/main.h                       Main program header file
+    - USB-PD/USB-PD_Provider_1port/Inc/tracer_emb_conf.h            setting file for UCPD tracer 
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd.h                      header of Ucpd init file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_devices_conf.h         UCPD device configuration file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_dpm_conf.h             UCPD stack configuration file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_dpm_core.h             device policy manager core header file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_dpm_users.h            device policy manager users header file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_pwr_if.h               power if management header file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_pdo_defs.h             pdo definition header file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_pwr_user.h             power management header file
+    - USB-PD/USB-PD_Provider_1port/Src/usbpd_vdm_users.h            vendor define message management header file
+
+
+@par Hardware and Software environment
+
+  - This example runs on STM32G0C1VETx devices.
+  
+  - This example has been tested with an STMicroelectronics STM32G0C1E-EV
+   
+
+@par How to use it ?
+
+In order to make the program work, you must do the following:
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example
+ - Run CubeMx Monitor and open trace tools
+ - Connect a type C sink device on the Type-C connector 1
+  
+ * 
© COPYRIGHT STMicroelectronics

+ */
diff --git a/test/.cproject b/test/.cproject
new file mode 100644
index 0000000..47f2e9b
--- /dev/null
+++ b/test/.cproject
@@ -0,0 +1,170 @@
+
+
+	
+		
+			
+				
+				
+					
+					
+					
+					
+					
+					
+				
+			
+			
+				
+					
+						
+							
+					
+					
+						
+						
+					
+				
+			
+			
+		
+		
+			
+				
+				
+					
+					
+					
+					
+					
+					
+				
+			
+			
+				
+					
+						
+							
+					
+					
+						
+						
+					
+				
+			
+		
+	
+	
+	
+		
+	
+	
+	
+	
+		
+		
+			
+		
+		
+			
+		
+	
+
diff --git a/test/.mxproject b/test/.mxproject
new file mode 100644
index 0000000..47173f4
--- /dev/null
+++ b/test/.mxproject
@@ -0,0 +1,25 @@
+[PreviousGenFiles]
+AdvancedFolderStructure=true
+HeaderFileListSize=3
+HeaderFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Inc/stm32f0xx_it.h
+HeaderFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Inc/stm32f0xx_hal_conf.h
+HeaderFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Inc/main.h
+HeaderFolderListSize=1
+HeaderPath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Inc
+HeaderFiles=;
+SourceFileListSize=3
+SourceFiles#0=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Src/stm32f0xx_it.c
+SourceFiles#1=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Src/stm32f0xx_hal_msp.c
+SourceFiles#2=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Src/main.c
+SourceFolderListSize=1
+SourcePath#0=/home/jof/STM32CubeIDE/workspace_1.5.0/test/Core/Src
+SourceFiles=;
+
+[PreviousLibFiles]
+LibFiles=Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h;Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h;Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h;Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_armv8mbl.h;
+
+[PreviousUsedCubeIDEFiles]
+SourceFiles=Core/Src/main.c;Core/Src/stm32f0xx_it.c;Core/Src/stm32f0xx_hal_msp.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Core/Src/system_stm32f0xx.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c;Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c;Core/Src/system_stm32f0xx.c;Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c;;
+HeaderPath=Drivers/STM32F0xx_HAL_Driver/Inc;Drivers/STM32F0xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F0xx/Include;Drivers/CMSIS/Include;Core/Inc;
+CDefines=USE_HAL_DRIVER;STM32F030x6;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
diff --git a/test/.project b/test/.project
new file mode 100644
index 0000000..f85b23f
--- /dev/null
+++ b/test/.project
@@ -0,0 +1,33 @@
+
+
+	test
+	
+	
+	
+	
+		
+			org.eclipse.cdt.managedbuilder.core.genmakebuilder
+			clean,full,incremental,
+			
+			
+		
+		
+			org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder
+			full,incremental,
+			
+			
+		
+	
+	
+		com.st.stm32cube.ide.mcu.MCUProjectNature
+		com.st.stm32cube.ide.mcu.MCUCubeProjectNature
+		org.eclipse.cdt.core.cnature
+		com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature
+		com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature
+		com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature
+		com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature
+		com.st.stm32cube.ide.mcu.MCURootProjectNature
+		org.eclipse.cdt.managedbuilder.core.managedBuildNature
+		org.eclipse.cdt.managedbuilder.core.ScannerConfigNature
+	
+
diff --git a/test/.settings/language.settings.xml b/test/.settings/language.settings.xml
new file mode 100644
index 0000000..51ddac3
--- /dev/null
+++ b/test/.settings/language.settings.xml
@@ -0,0 +1,27 @@
+
+
+	
+		
+			
+			
+			
+			
+			
+				
+				
+			
+		
+	
+	
+		
+			
+			
+			
+			
+			
+				
+				
+			
+		
+	
+
diff --git a/test/.settings/stm32cubeide.project.prefs b/test/.settings/stm32cubeide.project.prefs
new file mode 100644
index 0000000..9634960
--- /dev/null
+++ b/test/.settings/stm32cubeide.project.prefs
@@ -0,0 +1,3 @@
+8DF89ED150041C4CBC7CB9A9CAA90856=8C615CE5B86FB2E1EC96469D19A42305
+DC22A860405A8BF2F2C095E5B6529F12=8C615CE5B86FB2E1EC96469D19A42305
+eclipse.preferences.version=1
diff --git a/test/Core/Inc/main.h b/test/Core/Inc/main.h
new file mode 100644
index 0000000..a80f8f4
--- /dev/null
+++ b/test/Core/Inc/main.h
@@ -0,0 +1,71 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Core/Inc/stm32f0xx_hal_conf.h b/test/Core/Inc/stm32f0xx_hal_conf.h
new file mode 100644
index 0000000..309e8ea
--- /dev/null
+++ b/test/Core/Inc/stm32f0xx_hal_conf.h
@@ -0,0 +1,322 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CONF_H
+#define __STM32F0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+  /*#define HAL_ADC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_CAN_MODULE_ENABLED   */
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_COMP_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_TSC_MODULE_ENABLED   */
+/*#define HAL_DAC_MODULE_ENABLED   */
+/*#define HAL_I2S_MODULE_ENABLED   */
+/*#define HAL_IWDG_MODULE_ENABLED   */
+/*#define HAL_LCD_MODULE_ENABLED   */
+/*#define HAL_LPTIM_MODULE_ENABLED   */
+/*#define HAL_RNG_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SPI_MODULE_ENABLED   */
+/*#define HAL_TIM_MODULE_ENABLED   */
+/*#define HAL_UART_MODULE_ENABLED   */
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_IRDA_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+  *        Timeout value
+  */
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+  *        Timeout value
+  */
+#if !defined  (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator for ADC (HSI14) value.
+  */
+#if !defined  (HSI14_VALUE)
+#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+#endif /* HSI14_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator for USB (HSI48) value.
+  */
+#if !defined  (HSI48_VALUE)
+  #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+  #define LSI_VALUE  ((uint32_t)40000)
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Time out for LSE start up value in ms.
+  */
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */
+                                                                              /*  Warning: Must be set to higher priority for HAL_Delay()  */
+                                                                              /*  and HAL_GetTick() usage under interrupt context          */
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+#define  INSTRUCTION_CACHE_ENABLE     0
+#define  DATA_CACHE_ENABLE            0
+#define  USE_SPI_CRC                     0U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT   1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f0xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f0xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Core/Inc/stm32f0xx_it.h b/test/Core/Inc/stm32f0xx_it.h
new file mode 100644
index 0000000..c7afed4
--- /dev/null
+++ b/test/Core/Inc/stm32f0xx_it.h
@@ -0,0 +1,65 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_IT_H
+#define __STM32F0xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void SVC_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Core/Src/main.c b/test/Core/Src/main.c
new file mode 100644
index 0000000..662e199
--- /dev/null
+++ b/test/Core/Src/main.c
@@ -0,0 +1,67 @@
+
+#include "main.h"
+
+void SystemClock_Config(void);
+
+int main(void)
+{
+  HAL_Init();
+  SystemClock_Config();
+
+  GPIO_InitTypeDef GPIO_InitStruct;
+
+  GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_5 | GPIO_PIN_7;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  while (1)
+  {
+    HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_SET);
+	HAL_Delay(1000);
+	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_RESET);
+	HAL_Delay(1000);
+  }
+}
+
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+void Error_Handler(void)
+{
+  while (1)  { }
+}
+
+#ifdef  USE_FULL_ASSERT
+void assert_failed(uint8_t *file, uint32_t line)
+{
+}
+#endif /* USE_FULL_ASSERT */
diff --git a/test/Core/Src/stm32f0xx_hal_msp.c b/test/Core/Src/stm32f0xx_hal_msp.c
new file mode 100644
index 0000000..207fc34
--- /dev/null
+++ b/test/Core/Src/stm32f0xx_hal_msp.c
@@ -0,0 +1,84 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32f0xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Core/Src/stm32f0xx_it.c b/test/Core/Src/stm32f0xx_it.c
new file mode 100644
index 0000000..207e687
--- /dev/null
+++ b/test/Core/Src/stm32f0xx_it.c
@@ -0,0 +1,147 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f0xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M0 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+  while (1)
+  {
+  }
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVC_IRQn 0 */
+
+  /* USER CODE END SVC_IRQn 0 */
+  /* USER CODE BEGIN SVC_IRQn 1 */
+
+  /* USER CODE END SVC_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F0xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f0xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Core/Src/syscalls.c b/test/Core/Src/syscalls.c
new file mode 100644
index 0000000..4ec9584
--- /dev/null
+++ b/test/Core/Src/syscalls.c
@@ -0,0 +1,159 @@
+/**
+ ******************************************************************************
+ * @file      syscalls.c
+ * @author    Auto-generated by STM32CubeIDE
+ * @brief     STM32CubeIDE Minimal System calls file
+ *
+ *            For more information about which c-functions
+ *            need which of these lowlevel functions
+ *            please consult the Newlib libc-manual
+ ******************************************************************************
+ * @attention
+ *
+ * 
© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.

+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+
+
+/* Variables */
+//#undef errno
+extern int errno;
+extern int __io_putchar(int ch) __attribute__((weak));
+extern int __io_getchar(void) __attribute__((weak));
+
+register char * stack_ptr asm("sp");
+
+char *__env[1] = { 0 };
+char **environ = __env;
+
+
+/* Functions */
+void initialise_monitor_handles()
+{
+}
+
+int _getpid(void)
+{
+	return 1;
+}
+
+int _kill(int pid, int sig)
+{
+	errno = EINVAL;
+	return -1;
+}
+
+void _exit (int status)
+{
+	_kill(status, -1);
+	while (1) {}		/* Make sure we hang here */
+}
+
+__attribute__((weak)) int _read(int file, char *ptr, int len)
+{
+	int DataIdx;
+
+	for (DataIdx = 0; DataIdx < len; DataIdx++)
+	{
+		*ptr++ = __io_getchar();
+	}
+
+return len;
+}
+
+__attribute__((weak)) int _write(int file, char *ptr, int len)
+{
+	int DataIdx;
+
+	for (DataIdx = 0; DataIdx < len; DataIdx++)
+	{
+		__io_putchar(*ptr++);
+	}
+	return len;
+}
+
+int _close(int file)
+{
+	return -1;
+}
+
+
+int _fstat(int file, struct stat *st)
+{
+	st->st_mode = S_IFCHR;
+	return 0;
+}
+
+int _isatty(int file)
+{
+	return 1;
+}
+
+int _lseek(int file, int ptr, int dir)
+{
+	return 0;
+}
+
+int _open(char *path, int flags, ...)
+{
+	/* Pretend like we always fail */
+	return -1;
+}
+
+int _wait(int *status)
+{
+	errno = ECHILD;
+	return -1;
+}
+
+int _unlink(char *name)
+{
+	errno = ENOENT;
+	return -1;
+}
+
+int _times(struct tms *buf)
+{
+	return -1;
+}
+
+int _stat(char *file, struct stat *st)
+{
+	st->st_mode = S_IFCHR;
+	return 0;
+}
+
+int _link(char *old, char *new)
+{
+	errno = EMLINK;
+	return -1;
+}
+
+int _fork(void)
+{
+	errno = EAGAIN;
+	return -1;
+}
+
+int _execve(char *name, char **argv, char **env)
+{
+	errno = ENOMEM;
+	return -1;
+}
diff --git a/test/Core/Src/sysmem.c b/test/Core/Src/sysmem.c
new file mode 100644
index 0000000..d7cc52c
--- /dev/null
+++ b/test/Core/Src/sysmem.c
@@ -0,0 +1,80 @@
+/**
+ ******************************************************************************
+ * @file      sysmem.c
+ * @author    Generated by STM32CubeIDE
+ * @brief     STM32CubeIDE System Memory calls file
+ *
+ *            For more information about which C functions
+ *            need which of these lowlevel functions
+ *            please consult the newlib libc manual
+ ******************************************************************************
+ * @attention
+ *
+ * 
© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.

+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include 
+#include 
+
+/**
+ * Pointer to the current high watermark of the heap usage
+ */
+static uint8_t *__sbrk_heap_end = NULL;
+
+/**
+ * @brief _sbrk() allocates memory to the newlib heap and is used by malloc
+ *        and others from the C library
+ *
+ * @verbatim
+ * ############################################################################
+ * #  .data  #  .bss  #       newlib heap       #          MSP stack          #
+ * #         #        #                         # Reserved by _Min_Stack_Size #
+ * ############################################################################
+ * ^-- RAM start      ^-- _end                             _estack, RAM end --^
+ * @endverbatim
+ *
+ * This implementation starts allocating at the '_end' linker symbol
+ * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
+ * The implementation considers '_estack' linker symbol to be RAM end
+ * NOTE: If the MSP stack, at any point during execution, grows larger than the
+ * reserved size, please increase the '_Min_Stack_Size'.
+ *
+ * @param incr Memory size
+ * @return Pointer to allocated memory
+ */
+void *_sbrk(ptrdiff_t incr)
+{
+  extern uint8_t _end; /* Symbol defined in the linker script */
+  extern uint8_t _estack; /* Symbol defined in the linker script */
+  extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
+  const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
+  const uint8_t *max_heap = (uint8_t *)stack_limit;
+  uint8_t *prev_heap_end;
+
+  /* Initialize heap end at first call */
+  if (NULL == __sbrk_heap_end)
+  {
+    __sbrk_heap_end = &_end;
+  }
+
+  /* Protect heap from growing into the reserved MSP stack */
+  if (__sbrk_heap_end + incr > max_heap)
+  {
+    errno = ENOMEM;
+    return (void *)-1;
+  }
+
+  prev_heap_end = __sbrk_heap_end;
+  __sbrk_heap_end += incr;
+
+  return (void *)prev_heap_end;
+}
diff --git a/test/Core/Src/system_stm32f0xx.c b/test/Core/Src/system_stm32f0xx.c
new file mode 100644
index 0000000..1b0fbe5
--- /dev/null
+++ b/test/Core/Src/system_stm32f0xx.c
@@ -0,0 +1,247 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f0xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
+  *
+  * 1. This file provides two functions and one global variable to be called from
+  *    user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f0xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f0xx_system
+  * @{
+  */
+
+/** @addtogroup STM32F0xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f0xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Private_Defines
+  * @{
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE    ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
+                                                 This value can be provided and adapted by the user application. */
+#endif /* HSI48_VALUE */
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* NOTE :SystemInit(): This function is called at startup just after reset and 
+                         before branch to main program. This call is made inside
+                         the "startup_stm32f0xx.s" file.
+                         User can setups the default system clock (System clock source, PLL Multiplier
+                         and Divider factors, AHB/APBx prescalers and Flash settings).
+   */
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case RCC_CFGR_SWS_HSI:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case RCC_CFGR_SWS_HSE:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case RCC_CFGR_SWS_PLL:  /* PLL used as system clock */
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      pllmull = ( pllmull >> 18) + 2;
+      predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+
+      if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+      {
+        /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
+        SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
+      }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+      else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
+      {
+        /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
+        SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
+      }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+      else
+      {
+#if defined(STM32F042x6) || defined(STM32F048xx)  || defined(STM32F070x6) \
+ || defined(STM32F078xx) || defined(STM32F071xB)  || defined(STM32F072xB) \
+ || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx)  || defined(STM32F030xC)
+        /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
+        SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
+#else
+        /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || 
+          STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
+          STM32F091xC || STM32F098xx || STM32F030xC */
+      }
+      break;
+    default: /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Core/Startup/startup_stm32f030f4px.s b/test/Core/Startup/startup_stm32f030f4px.s
new file mode 100644
index 0000000..727c24d
--- /dev/null
+++ b/test/Core/Startup/startup_stm32f030f4px.s
@@ -0,0 +1,258 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f030x6.s
+  * @author    MCD Application Team
+  * @brief     STM32F030x4/STM32F030x6 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+  mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+
+LoopForever:
+    b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler                   /* Window WatchDog              */
+  .word  0                                 /* Reserved                     */
+  .word  RTC_IRQHandler                    /* RTC through the EXTI line    */
+  .word  FLASH_IRQHandler                  /* FLASH                        */
+  .word  RCC_IRQHandler                    /* RCC                          */
+  .word  EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word  EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word  EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word  0                                 /* Reserved                     */
+  .word  DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word  DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word  DMA1_Channel4_5_IRQHandler        /* DMA1 Channel 4 and Channel 5 */
+  .word  ADC1_IRQHandler                   /* ADC1                         */
+  .word  TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
+  .word  TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word  0                                 /* Reserved                     */
+  .word  TIM3_IRQHandler                   /* TIM3                         */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  TIM14_IRQHandler                  /* TIM14                        */
+  .word  0                                 /* Reserved                     */
+  .word  TIM16_IRQHandler                  /* TIM16                        */
+  .word  TIM17_IRQHandler                  /* TIM17                        */
+  .word  I2C1_IRQHandler                   /* I2C1                         */
+  .word  0                                 /* Reserved                     */
+  .word  SPI1_IRQHandler                   /* SPI1                         */
+  .word  0                                 /* Reserved                     */
+  .word  USART1_IRQHandler                 /* USART1                       */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+  .word  0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak      NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak      HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak      SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak      PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak      SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak      WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak      RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak      FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak      RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak      EXTI0_1_IRQHandler
+  .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+  .weak      EXTI2_3_IRQHandler
+  .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+  .weak      EXTI4_15_IRQHandler
+  .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel2_3_IRQHandler
+  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+  .weak      DMA1_Channel4_5_IRQHandler
+  .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+  .weak      ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
+  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+  .weak      TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak      TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak      TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak      TIM16_IRQHandler
+  .thumb_set TIM16_IRQHandler,Default_Handler
+
+  .weak      TIM17_IRQHandler
+  .thumb_set TIM17_IRQHandler,Default_Handler
+
+  .weak      I2C1_IRQHandler
+  .thumb_set I2C1_IRQHandler,Default_Handler
+
+  .weak      SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak      USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Debug/Core/Src/main.d b/test/Debug/Core/Src/main.d
new file mode 100644
index 0000000..087124b
--- /dev/null
+++ b/test/Debug/Core/Src/main.d
@@ -0,0 +1,78 @@
+Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Core/Inc/main.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Core/Src/main.o b/test/Debug/Core/Src/main.o
new file mode 100644
index 0000000..ca94a04
Binary files /dev/null and b/test/Debug/Core/Src/main.o differ
diff --git a/test/Debug/Core/Src/main.su b/test/Debug/Core/Src/main.su
new file mode 100644
index 0000000..7fa44aa
--- /dev/null
+++ b/test/Debug/Core/Src/main.su
@@ -0,0 +1,3 @@
+main.c:6:5:main	32	static
+main.c:28:6:SystemClock_Config	80	static
+main.c:58:6:Error_Handler	8	static
diff --git a/test/Debug/Core/Src/stm32f0xx_hal_msp.d b/test/Debug/Core/Src/stm32f0xx_hal_msp.d
new file mode 100644
index 0000000..62a4406
--- /dev/null
+++ b/test/Debug/Core/Src/stm32f0xx_hal_msp.d
@@ -0,0 +1,78 @@
+Core/Src/stm32f0xx_hal_msp.o: ../Core/Src/stm32f0xx_hal_msp.c \
+ ../Core/Inc/main.h ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Core/Inc/main.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Core/Src/stm32f0xx_hal_msp.o b/test/Debug/Core/Src/stm32f0xx_hal_msp.o
new file mode 100644
index 0000000..52513e8
Binary files /dev/null and b/test/Debug/Core/Src/stm32f0xx_hal_msp.o differ
diff --git a/test/Debug/Core/Src/stm32f0xx_hal_msp.su b/test/Debug/Core/Src/stm32f0xx_hal_msp.su
new file mode 100644
index 0000000..994fa07
--- /dev/null
+++ b/test/Debug/Core/Src/stm32f0xx_hal_msp.su
@@ -0,0 +1 @@
+stm32f0xx_hal_msp.c:64:6:HAL_MspInit	16	static
diff --git a/test/Debug/Core/Src/stm32f0xx_it.d b/test/Debug/Core/Src/stm32f0xx_it.d
new file mode 100644
index 0000000..d841325
--- /dev/null
+++ b/test/Debug/Core/Src/stm32f0xx_it.d
@@ -0,0 +1,81 @@
+Core/Src/stm32f0xx_it.o: ../Core/Src/stm32f0xx_it.c ../Core/Inc/main.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h \
+ ../Core/Inc/stm32f0xx_it.h
+
+../Core/Inc/main.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
+
+../Core/Inc/stm32f0xx_it.h:
diff --git a/test/Debug/Core/Src/stm32f0xx_it.o b/test/Debug/Core/Src/stm32f0xx_it.o
new file mode 100644
index 0000000..29422c4
Binary files /dev/null and b/test/Debug/Core/Src/stm32f0xx_it.o differ
diff --git a/test/Debug/Core/Src/stm32f0xx_it.su b/test/Debug/Core/Src/stm32f0xx_it.su
new file mode 100644
index 0000000..105da51
--- /dev/null
+++ b/test/Debug/Core/Src/stm32f0xx_it.su
@@ -0,0 +1,5 @@
+stm32f0xx_it.c:70:6:NMI_Handler	8	static
+stm32f0xx_it.c:85:6:HardFault_Handler	8	static
+stm32f0xx_it.c:100:6:SVC_Handler	8	static
+stm32f0xx_it.c:113:6:PendSV_Handler	8	static
+stm32f0xx_it.c:126:6:SysTick_Handler	8	static
diff --git a/test/Debug/Core/Src/subdir.mk b/test/Debug/Core/Src/subdir.mk
new file mode 100644
index 0000000..7955221
--- /dev/null
+++ b/test/Debug/Core/Src/subdir.mk
@@ -0,0 +1,44 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+C_SRCS += \
+../Core/Src/main.c \
+../Core/Src/stm32f0xx_hal_msp.c \
+../Core/Src/stm32f0xx_it.c \
+../Core/Src/syscalls.c \
+../Core/Src/sysmem.c \
+../Core/Src/system_stm32f0xx.c 
+
+OBJS += \
+./Core/Src/main.o \
+./Core/Src/stm32f0xx_hal_msp.o \
+./Core/Src/stm32f0xx_it.o \
+./Core/Src/syscalls.o \
+./Core/Src/sysmem.o \
+./Core/Src/system_stm32f0xx.o 
+
+C_DEPS += \
+./Core/Src/main.d \
+./Core/Src/stm32f0xx_hal_msp.d \
+./Core/Src/stm32f0xx_it.d \
+./Core/Src/syscalls.d \
+./Core/Src/sysmem.d \
+./Core/Src/system_stm32f0xx.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+Core/Src/main.o: ../Core/Src/main.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Core/Src/stm32f0xx_hal_msp.o: ../Core/Src/stm32f0xx_hal_msp.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f0xx_hal_msp.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Core/Src/stm32f0xx_it.o: ../Core/Src/stm32f0xx_it.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32f0xx_it.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Core/Src/syscalls.o: ../Core/Src/syscalls.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/syscalls.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Core/Src/sysmem.o: ../Core/Src/sysmem.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/sysmem.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Core/Src/system_stm32f0xx.o: ../Core/Src/system_stm32f0xx.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/system_stm32f0xx.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+
diff --git a/test/Debug/Core/Src/syscalls.d b/test/Debug/Core/Src/syscalls.d
new file mode 100644
index 0000000..8667c70
--- /dev/null
+++ b/test/Debug/Core/Src/syscalls.d
@@ -0,0 +1 @@
+Core/Src/syscalls.o: ../Core/Src/syscalls.c
diff --git a/test/Debug/Core/Src/syscalls.o b/test/Debug/Core/Src/syscalls.o
new file mode 100644
index 0000000..20e14cf
Binary files /dev/null and b/test/Debug/Core/Src/syscalls.o differ
diff --git a/test/Debug/Core/Src/syscalls.su b/test/Debug/Core/Src/syscalls.su
new file mode 100644
index 0000000..2a6e0d7
--- /dev/null
+++ b/test/Debug/Core/Src/syscalls.su
@@ -0,0 +1,18 @@
+syscalls.c:48:6:initialise_monitor_handles	8	static
+syscalls.c:52:5:_getpid	8	static
+syscalls.c:57:5:_kill	16	static
+syscalls.c:63:6:_exit	16	static
+syscalls.c:69:27:_read	32	static
+syscalls.c:81:27:_write	32	static
+syscalls.c:92:5:_close	16	static
+syscalls.c:98:5:_fstat	16	static
+syscalls.c:104:5:_isatty	16	static
+syscalls.c:109:5:_lseek	24	static
+syscalls.c:114:5:_open	20	static
+syscalls.c:120:5:_wait	16	static
+syscalls.c:126:5:_unlink	16	static
+syscalls.c:132:5:_times	16	static
+syscalls.c:137:5:_stat	16	static
+syscalls.c:143:5:_link	16	static
+syscalls.c:149:5:_fork	8	static
+syscalls.c:155:5:_execve	24	static
diff --git a/test/Debug/Core/Src/sysmem.d b/test/Debug/Core/Src/sysmem.d
new file mode 100644
index 0000000..74fecf9
--- /dev/null
+++ b/test/Debug/Core/Src/sysmem.d
@@ -0,0 +1 @@
+Core/Src/sysmem.o: ../Core/Src/sysmem.c
diff --git a/test/Debug/Core/Src/sysmem.o b/test/Debug/Core/Src/sysmem.o
new file mode 100644
index 0000000..0c68ea2
Binary files /dev/null and b/test/Debug/Core/Src/sysmem.o differ
diff --git a/test/Debug/Core/Src/sysmem.su b/test/Debug/Core/Src/sysmem.su
new file mode 100644
index 0000000..4474c68
--- /dev/null
+++ b/test/Debug/Core/Src/sysmem.su
@@ -0,0 +1 @@
+sysmem.c:54:7:_sbrk	32	static
diff --git a/test/Debug/Core/Src/system_stm32f0xx.d b/test/Debug/Core/Src/system_stm32f0xx.d
new file mode 100644
index 0000000..e20f9a2
--- /dev/null
+++ b/test/Debug/Core/Src/system_stm32f0xx.d
@@ -0,0 +1,76 @@
+Core/Src/system_stm32f0xx.o: ../Core/Src/system_stm32f0xx.c \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Core/Src/system_stm32f0xx.o b/test/Debug/Core/Src/system_stm32f0xx.o
new file mode 100644
index 0000000..35774bb
Binary files /dev/null and b/test/Debug/Core/Src/system_stm32f0xx.o differ
diff --git a/test/Debug/Core/Src/system_stm32f0xx.su b/test/Debug/Core/Src/system_stm32f0xx.su
new file mode 100644
index 0000000..2304684
--- /dev/null
+++ b/test/Debug/Core/Src/system_stm32f0xx.su
@@ -0,0 +1,2 @@
+system_stm32f0xx.c:128:6:SystemInit	8	static
+system_stm32f0xx.c:174:6:SystemCoreClockUpdate	24	static
diff --git a/test/Debug/Core/Startup/startup_stm32f030f4px.d b/test/Debug/Core/Startup/startup_stm32f030f4px.d
new file mode 100644
index 0000000..fbe3d71
--- /dev/null
+++ b/test/Debug/Core/Startup/startup_stm32f030f4px.d
@@ -0,0 +1,2 @@
+Core/Startup/startup_stm32f030f4px.o: \
+ ../Core/Startup/startup_stm32f030f4px.s
diff --git a/test/Debug/Core/Startup/startup_stm32f030f4px.o b/test/Debug/Core/Startup/startup_stm32f030f4px.o
new file mode 100644
index 0000000..c2c5510
Binary files /dev/null and b/test/Debug/Core/Startup/startup_stm32f030f4px.o differ
diff --git a/test/Debug/Core/Startup/subdir.mk b/test/Debug/Core/Startup/subdir.mk
new file mode 100644
index 0000000..e2766bd
--- /dev/null
+++ b/test/Debug/Core/Startup/subdir.mk
@@ -0,0 +1,19 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+S_SRCS += \
+../Core/Startup/startup_stm32f030f4px.s 
+
+OBJS += \
+./Core/Startup/startup_stm32f030f4px.o 
+
+S_DEPS += \
+./Core/Startup/startup_stm32f030f4px.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+Core/Startup/startup_stm32f030f4px.o: ../Core/Startup/startup_stm32f030f4px.s
+	arm-none-eabi-gcc -mcpu=cortex-m0 -g3 -c -x assembler-with-cpp -MMD -MP -MF"Core/Startup/startup_stm32f030f4px.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<"
+
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d
new file mode 100644
index 0000000..9b32d12
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
new file mode 100644
index 0000000..5938ab5
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su
new file mode 100644
index 0000000..0deff80
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.su
@@ -0,0 +1,23 @@
+stm32f0xx_hal.c:141:19:HAL_Init	8	static
+stm32f0xx_hal.c:165:19:HAL_DeInit	8	static
+stm32f0xx_hal.c:188:13:HAL_MspInit	8	static
+stm32f0xx_hal.c:199:13:HAL_MspDeInit	8	static
+stm32f0xx_hal.c:222:26:HAL_InitTick	24	static
+stm32f0xx_hal.c:281:13:HAL_IncTick	8	static
+stm32f0xx_hal.c:292:17:HAL_GetTick	8	static
+stm32f0xx_hal.c:301:10:HAL_GetTickPrio	8	static
+stm32f0xx_hal.c:310:19:HAL_SetTickFreq	32	static
+stm32f0xx_hal.c:342:21:HAL_GetTickFreq	8	static
+stm32f0xx_hal.c:358:13:HAL_Delay	24	static
+stm32f0xx_hal.c:384:13:HAL_SuspendTick	8	static
+stm32f0xx_hal.c:401:13:HAL_ResumeTick	8	static
+stm32f0xx_hal.c:411:10:HAL_GetHalVersion	8	static
+stm32f0xx_hal.c:420:10:HAL_GetREVID	8	static
+stm32f0xx_hal.c:429:10:HAL_GetDEVID	8	static
+stm32f0xx_hal.c:438:10:HAL_GetUIDw0	8	static
+stm32f0xx_hal.c:447:10:HAL_GetUIDw1	8	static
+stm32f0xx_hal.c:456:10:HAL_GetUIDw2	8	static
+stm32f0xx_hal.c:465:6:HAL_DBGMCU_EnableDBGStopMode	8	static
+stm32f0xx_hal.c:474:6:HAL_DBGMCU_DisableDBGStopMode	8	static
+stm32f0xx_hal.c:483:6:HAL_DBGMCU_EnableDBGStandbyMode	8	static
+stm32f0xx_hal.c:492:6:HAL_DBGMCU_DisableDBGStandbyMode	8	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d
new file mode 100644
index 0000000..750c6ff
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
new file mode 100644
index 0000000..2ac1e2e
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su
new file mode 100644
index 0000000..9fe77bd
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.su
@@ -0,0 +1,21 @@
+core_cm0.h:623:22:__NVIC_EnableIRQ	16	static
+core_cm0.h:659:22:__NVIC_DisableIRQ	16	static,ignoring_inline_asm
+core_cm0.h:678:26:__NVIC_GetPendingIRQ	16	static
+core_cm0.h:697:22:__NVIC_SetPendingIRQ	16	static
+core_cm0.h:712:22:__NVIC_ClearPendingIRQ	16	static
+core_cm0.h:730:22:__NVIC_SetPriority	24	static
+core_cm0.h:754:26:__NVIC_GetPriority	16	static
+core_cm0.h:856:34:__NVIC_SystemReset	8	static,ignoring_inline_asm
+core_cm0.h:920:26:SysTick_Config	16	static
+stm32f0xx_hal_cortex.c:136:6:HAL_NVIC_SetPriority	24	static
+stm32f0xx_hal_cortex.c:152:6:HAL_NVIC_EnableIRQ	16	static
+stm32f0xx_hal_cortex.c:168:6:HAL_NVIC_DisableIRQ	16	static
+stm32f0xx_hal_cortex.c:181:6:HAL_NVIC_SystemReset	8	static
+stm32f0xx_hal_cortex.c:194:10:HAL_SYSTICK_Config	16	static
+stm32f0xx_hal_cortex.c:226:10:HAL_NVIC_GetPriority	16	static
+stm32f0xx_hal_cortex.c:239:6:HAL_NVIC_SetPendingIRQ	16	static
+stm32f0xx_hal_cortex.c:257:10:HAL_NVIC_GetPendingIRQ	16	static
+stm32f0xx_hal_cortex.c:273:6:HAL_NVIC_ClearPendingIRQ	16	static
+stm32f0xx_hal_cortex.c:290:6:HAL_SYSTICK_CLKSourceConfig	16	static
+stm32f0xx_hal_cortex.c:308:6:HAL_SYSTICK_IRQHandler	8	static
+stm32f0xx_hal_cortex.c:317:13:HAL_SYSTICK_Callback	8	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d
new file mode 100644
index 0000000..6158fa4
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
new file mode 100644
index 0000000..3a30575
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su
new file mode 100644
index 0000000..c1baa6b
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.su
@@ -0,0 +1,14 @@
+stm32f0xx_hal_dma.c:138:19:HAL_DMA_Init	24	static
+stm32f0xx_hal_dma.c:200:19:HAL_DMA_DeInit	16	static
+stm32f0xx_hal_dma.c:282:19:HAL_DMA_Start	32	static
+stm32f0xx_hal_dma.c:329:19:HAL_DMA_Start_IT	32	static
+stm32f0xx_hal_dma.c:385:19:HAL_DMA_Abort	16	static
+stm32f0xx_hal_dma.c:423:19:HAL_DMA_Abort_IT	24	static
+stm32f0xx_hal_dma.c:469:19:HAL_DMA_PollForTransfer	32	static
+stm32f0xx_hal_dma.c:570:6:HAL_DMA_IRQHandler	24	static
+stm32f0xx_hal_dma.c:662:19:HAL_DMA_RegisterCallback	32	static
+stm32f0xx_hal_dma.c:713:19:HAL_DMA_UnRegisterCallback	24	static
+stm32f0xx_hal_dma.c:789:22:HAL_DMA_GetState	16	static
+stm32f0xx_hal_dma.c:800:10:HAL_DMA_GetError	16	static
+stm32f0xx_hal_dma.c:826:13:DMA_SetConfig	24	static
+stm32f0xx_hal_dma.c:860:13:DMA_CalcBaseAndBitshift	16	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d
new file mode 100644
index 0000000..76b58f3
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
new file mode 100644
index 0000000..a302efe
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su
new file mode 100644
index 0000000..1329b3c
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.su
@@ -0,0 +1,9 @@
+stm32f0xx_hal_exti.c:143:19:HAL_EXTI_SetConfigLine	32	static
+stm32f0xx_hal_exti.c:238:19:HAL_EXTI_GetConfigLine	32	static
+stm32f0xx_hal_exti.c:327:19:HAL_EXTI_ClearConfigLine	32	static
+stm32f0xx_hal_exti.c:380:19:HAL_EXTI_RegisterCallback	32	static
+stm32f0xx_hal_exti.c:405:19:HAL_EXTI_GetHandle	16	static
+stm32f0xx_hal_exti.c:445:6:HAL_EXTI_IRQHandler	24	static
+stm32f0xx_hal_exti.c:477:10:HAL_EXTI_GetPending	32	static
+stm32f0xx_hal_exti.c:506:6:HAL_EXTI_ClearPending	24	static
+stm32f0xx_hal_exti.c:527:6:HAL_EXTI_GenerateSWI	24	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d
new file mode 100644
index 0000000..2eb18d4
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
new file mode 100644
index 0000000..d5821b3
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su
new file mode 100644
index 0000000..c7142e1
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.su
@@ -0,0 +1,14 @@
+stm32f0xx_hal_flash.c:167:19:HAL_FLASH_Program	48	static
+stm32f0xx_hal_flash.c:239:19:HAL_FLASH_Program_IT	40	static
+stm32f0xx_hal_flash.c:285:6:HAL_FLASH_IRQHandler	24	static
+stm32f0xx_hal_flash.c:428:13:HAL_FLASH_EndOfOperationCallback	16	static
+stm32f0xx_hal_flash.c:446:13:HAL_FLASH_OperationErrorCallback	16	static
+stm32f0xx_hal_flash.c:479:19:HAL_FLASH_Unlock	16	static
+stm32f0xx_hal_flash.c:503:19:HAL_FLASH_Lock	8	static
+stm32f0xx_hal_flash.c:515:19:HAL_FLASH_OB_Unlock	8	static
+stm32f0xx_hal_flash.c:535:19:HAL_FLASH_OB_Lock	8	static
+stm32f0xx_hal_flash.c:548:19:HAL_FLASH_OB_Launch	8	static
+stm32f0xx_hal_flash.c:580:10:HAL_FLASH_GetError	8	static
+stm32f0xx_hal_flash.c:603:13:FLASH_Program_HalfWord	16	static
+stm32f0xx_hal_flash.c:620:19:FLASH_WaitForLastOperation	24	static
+stm32f0xx_hal_flash.c:663:13:FLASH_SetErrorCode	16	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d
new file mode 100644
index 0000000..f2b6d4a
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
new file mode 100644
index 0000000..649c927
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su
new file mode 100644
index 0000000..8e5b1da
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.su
@@ -0,0 +1,16 @@
+stm32f0xx_hal_flash_ex.c:159:19:HAL_FLASHEx_Erase	32	static
+stm32f0xx_hal_flash_ex.c:240:19:HAL_FLASHEx_Erase_IT	24	static
+stm32f0xx_hal_flash_ex.c:313:19:HAL_FLASHEx_OBErase	24	static
+stm32f0xx_hal_flash_ex.c:362:19:HAL_FLASHEx_OBProgram	32	static
+stm32f0xx_hal_flash_ex.c:443:6:HAL_FLASHEx_OBGetConfig	16	static
+stm32f0xx_hal_flash_ex.c:465:10:HAL_FLASHEx_OBGetUserData	24	static
+stm32f0xx_hal_flash_ex.c:500:13:FLASH_MassErase	8	static
+stm32f0xx_hal_flash_ex.c:521:26:FLASH_OB_EnableWRP	32	static
+stm32f0xx_hal_flash_ex.c:637:26:FLASH_OB_DisableWRP	32	static
+stm32f0xx_hal_flash_ex.c:751:26:FLASH_OB_RDP_LevelConfig	32	static
+stm32f0xx_hal_flash_ex.c:802:26:FLASH_OB_UserConfig	32	static
+stm32f0xx_hal_flash_ex.c:857:26:FLASH_OB_ProgramData	32	static
+stm32f0xx_hal_flash_ex.c:890:17:FLASH_OB_GetWRP	8	static
+stm32f0xx_hal_flash_ex.c:904:17:FLASH_OB_GetRDP	16	static
+stm32f0xx_hal_flash_ex.c:931:16:FLASH_OB_GetUser	8	static
+stm32f0xx_hal_flash_ex.c:960:6:FLASH_PageErase	16	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d
new file mode 100644
index 0000000..0cd7cbf
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
new file mode 100644
index 0000000..aea0d67
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su
new file mode 100644
index 0000000..457c393
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.su
@@ -0,0 +1,8 @@
+stm32f0xx_hal_gpio.c:177:6:HAL_GPIO_Init	32	static
+stm32f0xx_hal_gpio.c:302:6:HAL_GPIO_DeInit	32	static
+stm32f0xx_hal_gpio.c:385:15:HAL_GPIO_ReadPin	24	static
+stm32f0xx_hal_gpio.c:418:6:HAL_GPIO_WritePin	16	static
+stm32f0xx_hal_gpio.c:440:6:HAL_GPIO_TogglePin	24	static
+stm32f0xx_hal_gpio.c:465:19:HAL_GPIO_LockPin	24	static
+stm32f0xx_hal_gpio.c:500:6:HAL_GPIO_EXTI_IRQHandler	16	static
+stm32f0xx_hal_gpio.c:515:13:HAL_GPIO_EXTI_Callback	16	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d
new file mode 100644
index 0000000..57698d8
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
new file mode 100644
index 0000000..c062a7b
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su
new file mode 100644
index 0000000..f9394d0
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.su
@@ -0,0 +1,79 @@
+stm32f0xx_hal_i2c.c:476:19:HAL_I2C_Init	16	static
+stm32f0xx_hal_i2c.c:585:19:HAL_I2C_DeInit	16	static
+stm32f0xx_hal_i2c.c:631:13:HAL_I2C_MspInit	16	static
+stm32f0xx_hal_i2c.c:647:13:HAL_I2C_MspDeInit	16	static
+stm32f0xx_hal_i2c.c:1068:19:HAL_I2C_Master_Transmit	48	static
+stm32f0xx_hal_i2c.c:1183:19:HAL_I2C_Master_Receive	48	static
+stm32f0xx_hal_i2c.c:1297:19:HAL_I2C_Slave_Transmit	40	static
+stm32f0xx_hal_i2c.c:1434:19:HAL_I2C_Slave_Receive	40	static
+stm32f0xx_hal_i2c.c:1560:19:HAL_I2C_Master_Transmit_IT	48	static
+stm32f0xx_hal_i2c.c:1630:19:HAL_I2C_Master_Receive_IT	48	static
+stm32f0xx_hal_i2c.c:1697:19:HAL_I2C_Slave_Transmit_IT	24	static
+stm32f0xx_hal_i2c.c:1746:19:HAL_I2C_Slave_Receive_IT	24	static
+stm32f0xx_hal_i2c.c:1797:19:HAL_I2C_Master_Transmit_DMA	48	static
+stm32f0xx_hal_i2c.c:1941:19:HAL_I2C_Master_Receive_DMA	48	static
+stm32f0xx_hal_i2c.c:2083:19:HAL_I2C_Slave_Transmit_DMA	40	static
+stm32f0xx_hal_i2c.c:2186:19:HAL_I2C_Slave_Receive_DMA	40	static
+stm32f0xx_hal_i2c.c:2293:19:HAL_I2C_Mem_Write	48	static
+stm32f0xx_hal_i2c.c:2428:19:HAL_I2C_Mem_Read	48	static
+stm32f0xx_hal_i2c.c:2561:19:HAL_I2C_Mem_Write_IT	48	static
+stm32f0xx_hal_i2c.c:2653:19:HAL_I2C_Mem_Read_IT	48	static
+stm32f0xx_hal_i2c.c:2744:19:HAL_I2C_Mem_Write_DMA	56	static
+stm32f0xx_hal_i2c.c:2889:19:HAL_I2C_Mem_Read_DMA	56	static
+stm32f0xx_hal_i2c.c:3031:19:HAL_I2C_IsDeviceReady	48	static
+stm32f0xx_hal_i2c.c:3172:19:HAL_I2C_Master_Seq_Transmit_IT	48	static
+stm32f0xx_hal_i2c.c:3257:19:HAL_I2C_Master_Seq_Transmit_DMA	56	static
+stm32f0xx_hal_i2c.c:3420:19:HAL_I2C_Master_Seq_Receive_IT	48	static
+stm32f0xx_hal_i2c.c:3505:19:HAL_I2C_Master_Seq_Receive_DMA	56	static
+stm32f0xx_hal_i2c.c:3666:19:HAL_I2C_Slave_Seq_Transmit_IT	24	static
+stm32f0xx_hal_i2c.c:3762:19:HAL_I2C_Slave_Seq_Transmit_DMA	40	static
+stm32f0xx_hal_i2c.c:3942:19:HAL_I2C_Slave_Seq_Receive_IT	24	static
+stm32f0xx_hal_i2c.c:4038:19:HAL_I2C_Slave_Seq_Receive_DMA	40	static
+stm32f0xx_hal_i2c.c:4214:19:HAL_I2C_EnableListen_IT	16	static
+stm32f0xx_hal_i2c.c:4238:19:HAL_I2C_DisableListen_IT	24	static
+stm32f0xx_hal_i2c.c:4271:19:HAL_I2C_Master_Abort_IT	24	static
+stm32f0xx_hal_i2c.c:4333:6:HAL_I2C_EV_IRQHandler	24	static
+stm32f0xx_hal_i2c.c:4352:6:HAL_I2C_ER_IRQHandler	32	static
+stm32f0xx_hal_i2c.c:4401:13:HAL_I2C_MasterTxCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4417:13:HAL_I2C_MasterRxCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4432:13:HAL_I2C_SlaveTxCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4448:13:HAL_I2C_SlaveRxCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4466:13:HAL_I2C_AddrCallback	16	static
+stm32f0xx_hal_i2c.c:4484:13:HAL_I2C_ListenCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4500:13:HAL_I2C_MemTxCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4516:13:HAL_I2C_MemRxCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4532:13:HAL_I2C_ErrorCallback	16	static
+stm32f0xx_hal_i2c.c:4548:13:HAL_I2C_AbortCpltCallback	16	static
+stm32f0xx_hal_i2c.c:4583:22:HAL_I2C_GetState	16	static
+stm32f0xx_hal_i2c.c:4595:21:HAL_I2C_GetMode	16	static
+stm32f0xx_hal_i2c.c:4606:10:HAL_I2C_GetError	16	static
+stm32f0xx_hal_i2c.c:4631:26:I2C_Master_ISR_IT	48	static
+stm32f0xx_hal_i2c.c:4768:26:I2C_Slave_ISR_IT	32	static
+stm32f0xx_hal_i2c.c:4903:26:I2C_Master_ISR_DMA	48	static
+stm32f0xx_hal_i2c.c:5038:26:I2C_Slave_ISR_DMA	40	static
+stm32f0xx_hal_i2c.c:5178:26:I2C_RequestMemoryWrite	40	static
+stm32f0xx_hal_i2c.c:5232:26:I2C_RequestMemoryRead	40	static
+stm32f0xx_hal_i2c.c:5280:13:I2C_ITAddrCplt	32	static
+stm32f0xx_hal_i2c.c:5375:13:I2C_ITMasterSeqCplt	16	static
+stm32f0xx_hal_i2c.c:5428:13:I2C_ITSlaveSeqCplt	24	static
+stm32f0xx_hal_i2c.c:5502:13:I2C_ITMasterCplt	32	static
+stm32f0xx_hal_i2c.c:5645:13:I2C_ITSlaveCplt	32	static
+stm32f0xx_hal_i2c.c:5804:13:I2C_ITListenCplt	16	static
+stm32f0xx_hal_i2c.c:5855:13:I2C_ITError	24	static
+stm32f0xx_hal_i2c.c:5967:13:I2C_TreatErrorCallback	16	static
+stm32f0xx_hal_i2c.c:6005:13:I2C_Flush_TXDR	16	static
+stm32f0xx_hal_i2c.c:6026:13:I2C_DMAMasterTransmitCplt	24	static
+stm32f0xx_hal_i2c.c:6074:13:I2C_DMASlaveTransmitCplt	24	static
+stm32f0xx_hal_i2c.c:6101:13:I2C_DMAMasterReceiveCplt	24	static
+stm32f0xx_hal_i2c.c:6149:13:I2C_DMASlaveReceiveCplt	24	static
+stm32f0xx_hal_i2c.c:6176:13:I2C_DMAError	24	static
+stm32f0xx_hal_i2c.c:6193:13:I2C_DMAAbort	24	static
+stm32f0xx_hal_i2c.c:6220:26:I2C_WaitOnFlagUntilTimeout	24	static
+stm32f0xx_hal_i2c.c:6251:26:I2C_WaitOnTXISFlagUntilTimeout	24	static
+stm32f0xx_hal_i2c.c:6288:26:I2C_WaitOnSTOPFlagUntilTimeout	24	static
+stm32f0xx_hal_i2c.c:6322:26:I2C_WaitOnRXNEFlagUntilTimeout	24	static
+stm32f0xx_hal_i2c.c:6385:26:I2C_IsAcknowledgeFailed	24	static
+stm32f0xx_hal_i2c.c:6453:13:I2C_TransferConfig	32	static
+stm32f0xx_hal_i2c.c:6476:13:I2C_Enable_IRQ	24	static
+stm32f0xx_hal_i2c.c:6547:13:I2C_Disable_IRQ	24	static
+stm32f0xx_hal_i2c.c:6610:13:I2C_ConvertOtherXferOptions	16	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d
new file mode 100644
index 0000000..9737ab8
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
new file mode 100644
index 0000000..4a45e5f
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su
new file mode 100644
index 0000000..19b976d
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.su
@@ -0,0 +1,4 @@
+stm32f0xx_hal_i2c_ex.c:97:19:HAL_I2CEx_ConfigAnalogFilter	16	static
+stm32f0xx_hal_i2c_ex.c:141:19:HAL_I2CEx_ConfigDigitalFilter	24	static
+stm32f0xx_hal_i2c_ex.c:279:6:HAL_I2CEx_EnableFastModePlus	24	static
+stm32f0xx_hal_i2c_ex.c:304:6:HAL_I2CEx_DisableFastModePlus	24	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d
new file mode 100644
index 0000000..c8e0cad
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
new file mode 100644
index 0000000..6c62699
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su
new file mode 100644
index 0000000..6bc0263
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.su
@@ -0,0 +1,12 @@
+stm32f0xx_hal_pwr.c:75:6:HAL_PWR_DeInit	8	static
+stm32f0xx_hal_pwr.c:88:6:HAL_PWR_EnableBkUpAccess	8	static
+stm32f0xx_hal_pwr.c:100:6:HAL_PWR_DisableBkUpAccess	8	static
+stm32f0xx_hal_pwr.c:231:6:HAL_PWR_EnableWakeUpPin	16	static
+stm32f0xx_hal_pwr.c:246:6:HAL_PWR_DisableWakeUpPin	16	static
+stm32f0xx_hal_pwr.c:269:6:HAL_PWR_EnterSLEEPMode	16	static,ignoring_inline_asm
+stm32f0xx_hal_pwr.c:312:6:HAL_PWR_EnterSTOPMode	24	static,ignoring_inline_asm
+stm32f0xx_hal_pwr.c:367:6:HAL_PWR_EnterSTANDBYMode	8	static,ignoring_inline_asm
+stm32f0xx_hal_pwr.c:391:6:HAL_PWR_EnableSleepOnExit	8	static
+stm32f0xx_hal_pwr.c:404:6:HAL_PWR_DisableSleepOnExit	8	static
+stm32f0xx_hal_pwr.c:418:6:HAL_PWR_EnableSEVOnPend	8	static
+stm32f0xx_hal_pwr.c:431:6:HAL_PWR_DisableSEVOnPend	8	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d
new file mode 100644
index 0000000..1f7f41d
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
new file mode 100644
index 0000000..b1f0c2a
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.su
new file mode 100644
index 0000000..e69de29
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d
new file mode 100644
index 0000000..a7478f5
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
new file mode 100644
index 0000000..d9446fd
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su
new file mode 100644
index 0000000..b42db45
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.su
@@ -0,0 +1,13 @@
+stm32f0xx_hal_rcc.c:210:19:HAL_RCC_DeInit	16	static
+stm32f0xx_hal_rcc.c:300:19:HAL_RCC_OscConfig	40	static
+stm32f0xx_hal_rcc.c:779:19:HAL_RCC_ClockConfig	24	static
+stm32f0xx_hal_rcc.c:1018:6:HAL_RCC_MCOConfig	48	static
+stm32f0xx_hal_rcc.c:1052:6:HAL_RCC_EnableCSS	8	static
+stm32f0xx_hal_rcc.c:1061:6:HAL_RCC_DisableCSS	8	static
+stm32f0xx_hal_rcc.c:1097:10:HAL_RCC_GetSysClockFreq	72	static
+stm32f0xx_hal_rcc.c:1172:10:HAL_RCC_GetHCLKFreq	8	static
+stm32f0xx_hal_rcc.c:1183:10:HAL_RCC_GetPCLK1Freq	8	static
+stm32f0xx_hal_rcc.c:1196:6:HAL_RCC_GetOscConfig	16	static
+stm32f0xx_hal_rcc.c:1298:6:HAL_RCC_GetClockConfig	16	static
+stm32f0xx_hal_rcc.c:1324:6:HAL_RCC_NMI_IRQHandler	8	static
+stm32f0xx_hal_rcc.c:1341:13:HAL_RCC_CSSCallback	8	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d
new file mode 100644
index 0000000..b2234db
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
new file mode 100644
index 0000000..6254ec9
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su
new file mode 100644
index 0000000..e199abe
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.su
@@ -0,0 +1,3 @@
+stm32f0xx_hal_rcc_ex.c:104:19:HAL_RCCEx_PeriphCLKConfig	32	static
+stm32f0xx_hal_rcc_ex.c:270:6:HAL_RCCEx_GetPeriphCLKConfig	16	static
+stm32f0xx_hal_rcc_ex.c:370:10:HAL_RCCEx_GetPeriphCLKFreq	24	static
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d
new file mode 100644
index 0000000..2949cd6
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
new file mode 100644
index 0000000..2273035
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.su
new file mode 100644
index 0000000..e69de29
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d
new file mode 100644
index 0000000..2ccb2ad
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d
@@ -0,0 +1,77 @@
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o: \
+ ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h \
+ ../Core/Inc/stm32f0xx_hal_conf.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h \
+ ../Drivers/CMSIS/Include/core_cm0.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h \
+ ../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h:
+
+../Core/Inc/stm32f0xx_hal_conf.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h:
+
+../Drivers/CMSIS/Include/core_cm0.h:
+
+../Drivers/CMSIS/Include/cmsis_version.h:
+
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+
+../Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h:
+
+../Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h:
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
new file mode 100644
index 0000000..58a0bda
Binary files /dev/null and b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o differ
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.su b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.su
new file mode 100644
index 0000000..e69de29
diff --git a/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk
new file mode 100644
index 0000000..81bd2e6
--- /dev/null
+++ b/test/Debug/Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk
@@ -0,0 +1,89 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+C_SRCS += \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \
+../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c 
+
+OBJS += \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o 
+
+C_DEPS += \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d \
+./Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o: ../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c
+	arm-none-eabi-gcc "$<" -mcpu=cortex-m0 -std=gnu11 -g3 -DUSE_HAL_DRIVER -DSTM32F030x6 -DDEBUG -c -I../Core/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc -I../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
+
diff --git a/test/Debug/makefile b/test/Debug/makefile
new file mode 100644
index 0000000..b619612
--- /dev/null
+++ b/test/Debug/makefile
@@ -0,0 +1,94 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+-include ../makefile.init
+
+RM := rm -rf
+
+# All of the sources participating in the build are defined here
+-include sources.mk
+-include Drivers/STM32F0xx_HAL_Driver/Src/subdir.mk
+-include Core/Startup/subdir.mk
+-include Core/Src/subdir.mk
+-include subdir.mk
+-include objects.mk
+
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(strip $(S_DEPS)),)
+-include $(S_DEPS)
+endif
+ifneq ($(strip $(S_UPPER_DEPS)),)
+-include $(S_UPPER_DEPS)
+endif
+ifneq ($(strip $(C_DEPS)),)
+-include $(C_DEPS)
+endif
+endif
+
+-include ../makefile.defs
+
+BUILD_ARTIFACT_NAME := test
+BUILD_ARTIFACT_EXTENSION := elf
+BUILD_ARTIFACT_PREFIX := 
+BUILD_ARTIFACT := $(BUILD_ARTIFACT_PREFIX)$(BUILD_ARTIFACT_NAME).$(BUILD_ARTIFACT_EXTENSION)
+
+# Add inputs and outputs from these tool invocations to the build variables 
+EXECUTABLES += \
+test.elf \
+
+SIZE_OUTPUT += \
+default.size.stdout \
+
+OBJDUMP_LIST += \
+test.list \
+
+OBJCOPY_BIN += \
+test.bin \
+
+
+# All Target
+all: main-build
+
+# Main-build Target
+main-build: test.elf secondary-outputs
+
+# Tool invocations
+test.elf: $(OBJS) $(USER_OBJS) /home/jof/STM32CubeIDE/workspace_1.5.0/test/STM32F030F4PX_FLASH.ld
+	arm-none-eabi-gcc -o "test.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m0 -T"/home/jof/STM32CubeIDE/workspace_1.5.0/test/STM32F030F4PX_FLASH.ld" --specs=nosys.specs -Wl,-Map="test.map" -Wl,--gc-sections -static --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
+	@echo 'Finished building target: $@'
+	@echo ' '
+
+default.size.stdout: $(EXECUTABLES)
+	arm-none-eabi-size  $(EXECUTABLES)
+	@echo 'Finished building: $@'
+	@echo ' '
+
+test.list: $(EXECUTABLES)
+	arm-none-eabi-objdump -h -S $(EXECUTABLES) > "test.list"
+	@echo 'Finished building: $@'
+	@echo ' '
+
+test.bin: $(EXECUTABLES)
+	arm-none-eabi-objcopy  -O binary $(EXECUTABLES) "test.bin"
+	@echo 'Finished building: $@'
+	@echo ' '
+
+# Other Targets
+clean:
+	-$(RM) *
+	-@echo ' '
+
+secondary-outputs: $(SIZE_OUTPUT) $(OBJDUMP_LIST) $(OBJCOPY_BIN)
+
+fail-specified-linker-script-missing:
+	@echo 'Error: Cannot find the specified linker script. Check the linker settings in the build configuration.'
+	@exit 2
+
+warn-no-linker-script-specified:
+	@echo 'Warning: No linker script specified. Check the linker settings in the build configuration.'
+
+.PHONY: all clean dependents fail-specified-linker-script-missing warn-no-linker-script-specified
+.SECONDARY:
+
+-include ../makefile.targets
diff --git a/test/Debug/objects.list b/test/Debug/objects.list
new file mode 100644
index 0000000..e4ae9df
--- /dev/null
+++ b/test/Debug/objects.list
@@ -0,0 +1,22 @@
+"Core/Src/main.o"
+"Core/Src/stm32f0xx_hal_msp.o"
+"Core/Src/stm32f0xx_it.o"
+"Core/Src/syscalls.o"
+"Core/Src/sysmem.o"
+"Core/Src/system_stm32f0xx.o"
+"Core/Startup/startup_stm32f030f4px.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o"
+"Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o"
diff --git a/test/Debug/objects.mk b/test/Debug/objects.mk
new file mode 100644
index 0000000..742c2da
--- /dev/null
+++ b/test/Debug/objects.mk
@@ -0,0 +1,8 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+USER_OBJS :=
+
+LIBS :=
+
diff --git a/test/Debug/sources.mk b/test/Debug/sources.mk
new file mode 100644
index 0000000..26184e0
--- /dev/null
+++ b/test/Debug/sources.mk
@@ -0,0 +1,25 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+ELF_SRCS := 
+OBJ_SRCS := 
+S_SRCS := 
+C_SRCS := 
+S_UPPER_SRCS := 
+O_SRCS := 
+SIZE_OUTPUT := 
+OBJDUMP_LIST := 
+EXECUTABLES := 
+OBJS := 
+S_DEPS := 
+S_UPPER_DEPS := 
+C_DEPS := 
+OBJCOPY_BIN := 
+
+# Every subdirectory with source files must be described here
+SUBDIRS := \
+Core/Src \
+Core/Startup \
+Drivers/STM32F0xx_HAL_Driver/Src \
+
diff --git a/test/Debug/test.bin b/test/Debug/test.bin
new file mode 100755
index 0000000..62b301a
Binary files /dev/null and b/test/Debug/test.bin differ
diff --git a/test/Debug/test.elf b/test/Debug/test.elf
new file mode 100755
index 0000000..c0999d9
Binary files /dev/null and b/test/Debug/test.elf differ
diff --git a/test/Debug/test.list b/test/Debug/test.list
new file mode 100644
index 0000000..90e58bb
--- /dev/null
+++ b/test/Debug/test.list
@@ -0,0 +1,3345 @@
+
+test.elf:     file format elf32-littlearm
+
+Sections:
+Idx Name          Size      VMA       LMA       File off  Algn
+  0 .isr_vector   000000c0  08000000  08000000  00010000  2**0
+                  CONTENTS, ALLOC, LOAD, READONLY, DATA
+  1 .text         000011bc  080000c0  080000c0  000100c0  2**2
+                  CONTENTS, ALLOC, LOAD, READONLY, CODE
+  2 .rodata       00000030  0800127c  0800127c  0001127c  2**2
+                  CONTENTS, ALLOC, LOAD, READONLY, DATA
+  3 .ARM.extab    00000000  080012ac  080012ac  0002000c  2**0
+                  CONTENTS
+  4 .ARM          00000000  080012ac  080012ac  0002000c  2**0
+                  CONTENTS
+  5 .preinit_array 00000000  080012ac  080012ac  0002000c  2**0
+                  CONTENTS, ALLOC, LOAD, DATA
+  6 .init_array   00000004  080012ac  080012ac  000112ac  2**2
+                  CONTENTS, ALLOC, LOAD, DATA
+  7 .fini_array   00000004  080012b0  080012b0  000112b0  2**2
+                  CONTENTS, ALLOC, LOAD, DATA
+  8 .data         0000000c  20000000  080012b4  00020000  2**2
+                  CONTENTS, ALLOC, LOAD, DATA
+  9 .bss          00000020  2000000c  080012c0  0002000c  2**2
+                  ALLOC
+ 10 ._user_heap_stack 00000604  2000002c  080012c0  0002002c  2**0
+                  ALLOC
+ 11 .ARM.attributes 00000028  00000000  00000000  0002000c  2**0
+                  CONTENTS, READONLY
+ 12 .debug_info   000026ec  00000000  00000000  00020034  2**0
+                  CONTENTS, READONLY, DEBUGGING
+ 13 .debug_abbrev 00000c78  00000000  00000000  00022720  2**0
+                  CONTENTS, READONLY, DEBUGGING
+ 14 .debug_aranges 00000348  00000000  00000000  00023398  2**3
+                  CONTENTS, READONLY, DEBUGGING
+ 15 .debug_ranges 000002c0  00000000  00000000  000236e0  2**3
+                  CONTENTS, READONLY, DEBUGGING
+ 16 .debug_macro  0000dd5a  00000000  00000000  000239a0  2**0
+                  CONTENTS, READONLY, DEBUGGING
+ 17 .debug_line   00003b56  00000000  00000000  000316fa  2**0
+                  CONTENTS, READONLY, DEBUGGING
+ 18 .debug_str    00052bb5  00000000  00000000  00035250  2**0
+                  CONTENTS, READONLY, DEBUGGING
+ 19 .comment      0000007b  00000000  00000000  00087e05  2**0
+                  CONTENTS, READONLY
+ 20 .debug_frame  000009dc  00000000  00000000  00087e80  2**2
+                  CONTENTS, READONLY, DEBUGGING
+
+Disassembly of section .text:
+
+080000c0 <__do_global_dtors_aux>:
+ 80000c0:	b510      	push	{r4, lr}
+ 80000c2:	4c06      	ldr	r4, [pc, #24]	; (80000dc <__do_global_dtors_aux+0x1c>)
+ 80000c4:	7823      	ldrb	r3, [r4, #0]
+ 80000c6:	2b00      	cmp	r3, #0
+ 80000c8:	d107      	bne.n	80000da <__do_global_dtors_aux+0x1a>
+ 80000ca:	4b05      	ldr	r3, [pc, #20]	; (80000e0 <__do_global_dtors_aux+0x20>)
+ 80000cc:	2b00      	cmp	r3, #0
+ 80000ce:	d002      	beq.n	80000d6 <__do_global_dtors_aux+0x16>
+ 80000d0:	4804      	ldr	r0, [pc, #16]	; (80000e4 <__do_global_dtors_aux+0x24>)
+ 80000d2:	e000      	b.n	80000d6 <__do_global_dtors_aux+0x16>
+ 80000d4:	bf00      	nop
+ 80000d6:	2301      	movs	r3, #1
+ 80000d8:	7023      	strb	r3, [r4, #0]
+ 80000da:	bd10      	pop	{r4, pc}
+ 80000dc:	2000000c 	.word	0x2000000c
+ 80000e0:	00000000 	.word	0x00000000
+ 80000e4:	08001264 	.word	0x08001264
+
+080000e8 :
+ 80000e8:	4b04      	ldr	r3, [pc, #16]	; (80000fc )
+ 80000ea:	b510      	push	{r4, lr}
+ 80000ec:	2b00      	cmp	r3, #0
+ 80000ee:	d003      	beq.n	80000f8 
+ 80000f0:	4903      	ldr	r1, [pc, #12]	; (8000100 )
+ 80000f2:	4804      	ldr	r0, [pc, #16]	; (8000104 )
+ 80000f4:	e000      	b.n	80000f8 
+ 80000f6:	bf00      	nop
+ 80000f8:	bd10      	pop	{r4, pc}
+ 80000fa:	46c0      	nop			; (mov r8, r8)
+ 80000fc:	00000000 	.word	0x00000000
+ 8000100:	20000010 	.word	0x20000010
+ 8000104:	08001264 	.word	0x08001264
+
+08000108 <__udivsi3>:
+ 8000108:	2200      	movs	r2, #0
+ 800010a:	0843      	lsrs	r3, r0, #1
+ 800010c:	428b      	cmp	r3, r1
+ 800010e:	d374      	bcc.n	80001fa <__udivsi3+0xf2>
+ 8000110:	0903      	lsrs	r3, r0, #4
+ 8000112:	428b      	cmp	r3, r1
+ 8000114:	d35f      	bcc.n	80001d6 <__udivsi3+0xce>
+ 8000116:	0a03      	lsrs	r3, r0, #8
+ 8000118:	428b      	cmp	r3, r1
+ 800011a:	d344      	bcc.n	80001a6 <__udivsi3+0x9e>
+ 800011c:	0b03      	lsrs	r3, r0, #12
+ 800011e:	428b      	cmp	r3, r1
+ 8000120:	d328      	bcc.n	8000174 <__udivsi3+0x6c>
+ 8000122:	0c03      	lsrs	r3, r0, #16
+ 8000124:	428b      	cmp	r3, r1
+ 8000126:	d30d      	bcc.n	8000144 <__udivsi3+0x3c>
+ 8000128:	22ff      	movs	r2, #255	; 0xff
+ 800012a:	0209      	lsls	r1, r1, #8
+ 800012c:	ba12      	rev	r2, r2
+ 800012e:	0c03      	lsrs	r3, r0, #16
+ 8000130:	428b      	cmp	r3, r1
+ 8000132:	d302      	bcc.n	800013a <__udivsi3+0x32>
+ 8000134:	1212      	asrs	r2, r2, #8
+ 8000136:	0209      	lsls	r1, r1, #8
+ 8000138:	d065      	beq.n	8000206 <__udivsi3+0xfe>
+ 800013a:	0b03      	lsrs	r3, r0, #12
+ 800013c:	428b      	cmp	r3, r1
+ 800013e:	d319      	bcc.n	8000174 <__udivsi3+0x6c>
+ 8000140:	e000      	b.n	8000144 <__udivsi3+0x3c>
+ 8000142:	0a09      	lsrs	r1, r1, #8
+ 8000144:	0bc3      	lsrs	r3, r0, #15
+ 8000146:	428b      	cmp	r3, r1
+ 8000148:	d301      	bcc.n	800014e <__udivsi3+0x46>
+ 800014a:	03cb      	lsls	r3, r1, #15
+ 800014c:	1ac0      	subs	r0, r0, r3
+ 800014e:	4152      	adcs	r2, r2
+ 8000150:	0b83      	lsrs	r3, r0, #14
+ 8000152:	428b      	cmp	r3, r1
+ 8000154:	d301      	bcc.n	800015a <__udivsi3+0x52>
+ 8000156:	038b      	lsls	r3, r1, #14
+ 8000158:	1ac0      	subs	r0, r0, r3
+ 800015a:	4152      	adcs	r2, r2
+ 800015c:	0b43      	lsrs	r3, r0, #13
+ 800015e:	428b      	cmp	r3, r1
+ 8000160:	d301      	bcc.n	8000166 <__udivsi3+0x5e>
+ 8000162:	034b      	lsls	r3, r1, #13
+ 8000164:	1ac0      	subs	r0, r0, r3
+ 8000166:	4152      	adcs	r2, r2
+ 8000168:	0b03      	lsrs	r3, r0, #12
+ 800016a:	428b      	cmp	r3, r1
+ 800016c:	d301      	bcc.n	8000172 <__udivsi3+0x6a>
+ 800016e:	030b      	lsls	r3, r1, #12
+ 8000170:	1ac0      	subs	r0, r0, r3
+ 8000172:	4152      	adcs	r2, r2
+ 8000174:	0ac3      	lsrs	r3, r0, #11
+ 8000176:	428b      	cmp	r3, r1
+ 8000178:	d301      	bcc.n	800017e <__udivsi3+0x76>
+ 800017a:	02cb      	lsls	r3, r1, #11
+ 800017c:	1ac0      	subs	r0, r0, r3
+ 800017e:	4152      	adcs	r2, r2
+ 8000180:	0a83      	lsrs	r3, r0, #10
+ 8000182:	428b      	cmp	r3, r1
+ 8000184:	d301      	bcc.n	800018a <__udivsi3+0x82>
+ 8000186:	028b      	lsls	r3, r1, #10
+ 8000188:	1ac0      	subs	r0, r0, r3
+ 800018a:	4152      	adcs	r2, r2
+ 800018c:	0a43      	lsrs	r3, r0, #9
+ 800018e:	428b      	cmp	r3, r1
+ 8000190:	d301      	bcc.n	8000196 <__udivsi3+0x8e>
+ 8000192:	024b      	lsls	r3, r1, #9
+ 8000194:	1ac0      	subs	r0, r0, r3
+ 8000196:	4152      	adcs	r2, r2
+ 8000198:	0a03      	lsrs	r3, r0, #8
+ 800019a:	428b      	cmp	r3, r1
+ 800019c:	d301      	bcc.n	80001a2 <__udivsi3+0x9a>
+ 800019e:	020b      	lsls	r3, r1, #8
+ 80001a0:	1ac0      	subs	r0, r0, r3
+ 80001a2:	4152      	adcs	r2, r2
+ 80001a4:	d2cd      	bcs.n	8000142 <__udivsi3+0x3a>
+ 80001a6:	09c3      	lsrs	r3, r0, #7
+ 80001a8:	428b      	cmp	r3, r1
+ 80001aa:	d301      	bcc.n	80001b0 <__udivsi3+0xa8>
+ 80001ac:	01cb      	lsls	r3, r1, #7
+ 80001ae:	1ac0      	subs	r0, r0, r3
+ 80001b0:	4152      	adcs	r2, r2
+ 80001b2:	0983      	lsrs	r3, r0, #6
+ 80001b4:	428b      	cmp	r3, r1
+ 80001b6:	d301      	bcc.n	80001bc <__udivsi3+0xb4>
+ 80001b8:	018b      	lsls	r3, r1, #6
+ 80001ba:	1ac0      	subs	r0, r0, r3
+ 80001bc:	4152      	adcs	r2, r2
+ 80001be:	0943      	lsrs	r3, r0, #5
+ 80001c0:	428b      	cmp	r3, r1
+ 80001c2:	d301      	bcc.n	80001c8 <__udivsi3+0xc0>
+ 80001c4:	014b      	lsls	r3, r1, #5
+ 80001c6:	1ac0      	subs	r0, r0, r3
+ 80001c8:	4152      	adcs	r2, r2
+ 80001ca:	0903      	lsrs	r3, r0, #4
+ 80001cc:	428b      	cmp	r3, r1
+ 80001ce:	d301      	bcc.n	80001d4 <__udivsi3+0xcc>
+ 80001d0:	010b      	lsls	r3, r1, #4
+ 80001d2:	1ac0      	subs	r0, r0, r3
+ 80001d4:	4152      	adcs	r2, r2
+ 80001d6:	08c3      	lsrs	r3, r0, #3
+ 80001d8:	428b      	cmp	r3, r1
+ 80001da:	d301      	bcc.n	80001e0 <__udivsi3+0xd8>
+ 80001dc:	00cb      	lsls	r3, r1, #3
+ 80001de:	1ac0      	subs	r0, r0, r3
+ 80001e0:	4152      	adcs	r2, r2
+ 80001e2:	0883      	lsrs	r3, r0, #2
+ 80001e4:	428b      	cmp	r3, r1
+ 80001e6:	d301      	bcc.n	80001ec <__udivsi3+0xe4>
+ 80001e8:	008b      	lsls	r3, r1, #2
+ 80001ea:	1ac0      	subs	r0, r0, r3
+ 80001ec:	4152      	adcs	r2, r2
+ 80001ee:	0843      	lsrs	r3, r0, #1
+ 80001f0:	428b      	cmp	r3, r1
+ 80001f2:	d301      	bcc.n	80001f8 <__udivsi3+0xf0>
+ 80001f4:	004b      	lsls	r3, r1, #1
+ 80001f6:	1ac0      	subs	r0, r0, r3
+ 80001f8:	4152      	adcs	r2, r2
+ 80001fa:	1a41      	subs	r1, r0, r1
+ 80001fc:	d200      	bcs.n	8000200 <__udivsi3+0xf8>
+ 80001fe:	4601      	mov	r1, r0
+ 8000200:	4152      	adcs	r2, r2
+ 8000202:	4610      	mov	r0, r2
+ 8000204:	4770      	bx	lr
+ 8000206:	e7ff      	b.n	8000208 <__udivsi3+0x100>
+ 8000208:	b501      	push	{r0, lr}
+ 800020a:	2000      	movs	r0, #0
+ 800020c:	f000 f806 	bl	800021c <__aeabi_idiv0>
+ 8000210:	bd02      	pop	{r1, pc}
+ 8000212:	46c0      	nop			; (mov r8, r8)
+
+08000214 <__aeabi_uidivmod>:
+ 8000214:	2900      	cmp	r1, #0
+ 8000216:	d0f7      	beq.n	8000208 <__udivsi3+0x100>
+ 8000218:	e776      	b.n	8000108 <__udivsi3>
+ 800021a:	4770      	bx	lr
+
+0800021c <__aeabi_idiv0>:
+ 800021c:	4770      	bx	lr
+ 800021e:	46c0      	nop			; (mov r8, r8)
+
+08000220 
:
+#include "main.h"
+
+void SystemClock_Config(void);
+
+int main(void)
+{
+ 8000220:	b580      	push	{r7, lr}
+ 8000222:	b086      	sub	sp, #24
+ 8000224:	af00      	add	r7, sp, #0
+  HAL_Init();
+ 8000226:	f000 f8db 	bl	80003e0 
+  SystemClock_Config();
+ 800022a:	f000 f82c 	bl	8000286 
+
+  GPIO_InitTypeDef GPIO_InitStruct;
+
+  GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_5 | GPIO_PIN_7;
+ 800022e:	1d3b      	adds	r3, r7, #4
+ 8000230:	22a4      	movs	r2, #164	; 0xa4
+ 8000232:	601a      	str	r2, [r3, #0]
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ 8000234:	1d3b      	adds	r3, r7, #4
+ 8000236:	2201      	movs	r2, #1
+ 8000238:	605a      	str	r2, [r3, #4]
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+ 800023a:	1d3b      	adds	r3, r7, #4
+ 800023c:	2200      	movs	r2, #0
+ 800023e:	609a      	str	r2, [r3, #8]
+  GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
+ 8000240:	1d3b      	adds	r3, r7, #4
+ 8000242:	2200      	movs	r2, #0
+ 8000244:	60da      	str	r2, [r3, #12]
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+ 8000246:	1d3a      	adds	r2, r7, #4
+ 8000248:	2390      	movs	r3, #144	; 0x90
+ 800024a:	05db      	lsls	r3, r3, #23
+ 800024c:	0011      	movs	r1, r2
+ 800024e:	0018      	movs	r0, r3
+ 8000250:	f000 fa00 	bl	8000654 
+
+  while (1)
+  {
+    HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_SET);
+ 8000254:	2390      	movs	r3, #144	; 0x90
+ 8000256:	05db      	lsls	r3, r3, #23
+ 8000258:	2201      	movs	r2, #1
+ 800025a:	2104      	movs	r1, #4
+ 800025c:	0018      	movs	r0, r3
+ 800025e:	f000 fb69 	bl	8000934 
+	HAL_Delay(1000);
+ 8000262:	23fa      	movs	r3, #250	; 0xfa
+ 8000264:	009b      	lsls	r3, r3, #2
+ 8000266:	0018      	movs	r0, r3
+ 8000268:	f000 f91e 	bl	80004a8 
+	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_RESET);
+ 800026c:	2390      	movs	r3, #144	; 0x90
+ 800026e:	05db      	lsls	r3, r3, #23
+ 8000270:	2200      	movs	r2, #0
+ 8000272:	2104      	movs	r1, #4
+ 8000274:	0018      	movs	r0, r3
+ 8000276:	f000 fb5d 	bl	8000934 
+	HAL_Delay(1000);
+ 800027a:	23fa      	movs	r3, #250	; 0xfa
+ 800027c:	009b      	lsls	r3, r3, #2
+ 800027e:	0018      	movs	r0, r3
+ 8000280:	f000 f912 	bl	80004a8 
+    HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_SET);
+ 8000284:	e7e6      	b.n	8000254 
+
+08000286 :
+  }
+}
+
+void SystemClock_Config(void)
+{
+ 8000286:	b590      	push	{r4, r7, lr}
+ 8000288:	b091      	sub	sp, #68	; 0x44
+ 800028a:	af00      	add	r7, sp, #0
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+ 800028c:	2410      	movs	r4, #16
+ 800028e:	193b      	adds	r3, r7, r4
+ 8000290:	0018      	movs	r0, r3
+ 8000292:	2330      	movs	r3, #48	; 0x30
+ 8000294:	001a      	movs	r2, r3
+ 8000296:	2100      	movs	r1, #0
+ 8000298:	f000 ffdc 	bl	8001254 
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+ 800029c:	003b      	movs	r3, r7
+ 800029e:	0018      	movs	r0, r3
+ 80002a0:	2310      	movs	r3, #16
+ 80002a2:	001a      	movs	r2, r3
+ 80002a4:	2100      	movs	r1, #0
+ 80002a6:	f000 ffd5 	bl	8001254 
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+ 80002aa:	0021      	movs	r1, r4
+ 80002ac:	187b      	adds	r3, r7, r1
+ 80002ae:	2202      	movs	r2, #2
+ 80002b0:	601a      	str	r2, [r3, #0]
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ 80002b2:	187b      	adds	r3, r7, r1
+ 80002b4:	2201      	movs	r2, #1
+ 80002b6:	60da      	str	r2, [r3, #12]
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ 80002b8:	187b      	adds	r3, r7, r1
+ 80002ba:	2210      	movs	r2, #16
+ 80002bc:	611a      	str	r2, [r3, #16]
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ 80002be:	187b      	adds	r3, r7, r1
+ 80002c0:	2200      	movs	r2, #0
+ 80002c2:	621a      	str	r2, [r3, #32]
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ 80002c4:	187b      	adds	r3, r7, r1
+ 80002c6:	0018      	movs	r0, r3
+ 80002c8:	f000 fb52 	bl	8000970 
+ 80002cc:	1e03      	subs	r3, r0, #0
+ 80002ce:	d001      	beq.n	80002d4 
+  {
+    Error_Handler();
+ 80002d0:	f000 f819 	bl	8000306 
+  }
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+ 80002d4:	003b      	movs	r3, r7
+ 80002d6:	2207      	movs	r2, #7
+ 80002d8:	601a      	str	r2, [r3, #0]
+                              |RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
+ 80002da:	003b      	movs	r3, r7
+ 80002dc:	2200      	movs	r2, #0
+ 80002de:	605a      	str	r2, [r3, #4]
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ 80002e0:	003b      	movs	r3, r7
+ 80002e2:	2200      	movs	r2, #0
+ 80002e4:	609a      	str	r2, [r3, #8]
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+ 80002e6:	003b      	movs	r3, r7
+ 80002e8:	2200      	movs	r2, #0
+ 80002ea:	60da      	str	r2, [r3, #12]
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+ 80002ec:	003b      	movs	r3, r7
+ 80002ee:	2100      	movs	r1, #0
+ 80002f0:	0018      	movs	r0, r3
+ 80002f2:	f000 fe59 	bl	8000fa8 
+ 80002f6:	1e03      	subs	r3, r0, #0
+ 80002f8:	d001      	beq.n	80002fe 
+  {
+    Error_Handler();
+ 80002fa:	f000 f804 	bl	8000306 
+  }
+}
+ 80002fe:	46c0      	nop			; (mov r8, r8)
+ 8000300:	46bd      	mov	sp, r7
+ 8000302:	b011      	add	sp, #68	; 0x44
+ 8000304:	bd90      	pop	{r4, r7, pc}
+
+08000306 :
+
+void Error_Handler(void)
+{
+ 8000306:	b580      	push	{r7, lr}
+ 8000308:	af00      	add	r7, sp, #0
+  while (1)  { }
+ 800030a:	e7fe      	b.n	800030a 
+
+0800030c :
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+ 800030c:	b580      	push	{r7, lr}
+ 800030e:	b082      	sub	sp, #8
+ 8000310:	af00      	add	r7, sp, #0
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+ 8000312:	4b0f      	ldr	r3, [pc, #60]	; (8000350 )
+ 8000314:	699a      	ldr	r2, [r3, #24]
+ 8000316:	4b0e      	ldr	r3, [pc, #56]	; (8000350 )
+ 8000318:	2101      	movs	r1, #1
+ 800031a:	430a      	orrs	r2, r1
+ 800031c:	619a      	str	r2, [r3, #24]
+ 800031e:	4b0c      	ldr	r3, [pc, #48]	; (8000350 )
+ 8000320:	699b      	ldr	r3, [r3, #24]
+ 8000322:	2201      	movs	r2, #1
+ 8000324:	4013      	ands	r3, r2
+ 8000326:	607b      	str	r3, [r7, #4]
+ 8000328:	687b      	ldr	r3, [r7, #4]
+  __HAL_RCC_PWR_CLK_ENABLE();
+ 800032a:	4b09      	ldr	r3, [pc, #36]	; (8000350 )
+ 800032c:	69da      	ldr	r2, [r3, #28]
+ 800032e:	4b08      	ldr	r3, [pc, #32]	; (8000350 )
+ 8000330:	2180      	movs	r1, #128	; 0x80
+ 8000332:	0549      	lsls	r1, r1, #21
+ 8000334:	430a      	orrs	r2, r1
+ 8000336:	61da      	str	r2, [r3, #28]
+ 8000338:	4b05      	ldr	r3, [pc, #20]	; (8000350 )
+ 800033a:	69da      	ldr	r2, [r3, #28]
+ 800033c:	2380      	movs	r3, #128	; 0x80
+ 800033e:	055b      	lsls	r3, r3, #21
+ 8000340:	4013      	ands	r3, r2
+ 8000342:	603b      	str	r3, [r7, #0]
+ 8000344:	683b      	ldr	r3, [r7, #0]
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+ 8000346:	46c0      	nop			; (mov r8, r8)
+ 8000348:	46bd      	mov	sp, r7
+ 800034a:	b002      	add	sp, #8
+ 800034c:	bd80      	pop	{r7, pc}
+ 800034e:	46c0      	nop			; (mov r8, r8)
+ 8000350:	40021000 	.word	0x40021000
+
+08000354 :
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+ 8000354:	b580      	push	{r7, lr}
+ 8000356:	af00      	add	r7, sp, #0
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+  while (1)
+ 8000358:	e7fe      	b.n	8000358 
+
+0800035a :
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+ 800035a:	b580      	push	{r7, lr}
+ 800035c:	af00      	add	r7, sp, #0
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+ 800035e:	e7fe      	b.n	800035e 
+
+08000360 :
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+ 8000360:	b580      	push	{r7, lr}
+ 8000362:	af00      	add	r7, sp, #0
+
+  /* USER CODE END SVC_IRQn 0 */
+  /* USER CODE BEGIN SVC_IRQn 1 */
+
+  /* USER CODE END SVC_IRQn 1 */
+}
+ 8000364:	46c0      	nop			; (mov r8, r8)
+ 8000366:	46bd      	mov	sp, r7
+ 8000368:	bd80      	pop	{r7, pc}
+
+0800036a :
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+ 800036a:	b580      	push	{r7, lr}
+ 800036c:	af00      	add	r7, sp, #0
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+ 800036e:	46c0      	nop			; (mov r8, r8)
+ 8000370:	46bd      	mov	sp, r7
+ 8000372:	bd80      	pop	{r7, pc}
+
+08000374 :
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+ 8000374:	b580      	push	{r7, lr}
+ 8000376:	af00      	add	r7, sp, #0
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+ 8000378:	f000 f87a 	bl	8000470 
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+ 800037c:	46c0      	nop			; (mov r8, r8)
+ 800037e:	46bd      	mov	sp, r7
+ 8000380:	bd80      	pop	{r7, pc}
+
+08000382 :
+  * @brief  Setup the microcontroller system
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+ 8000382:	b580      	push	{r7, lr}
+ 8000384:	af00      	add	r7, sp, #0
+                         before branch to main program. This call is made inside
+                         the "startup_stm32f0xx.s" file.
+                         User can setups the default system clock (System clock source, PLL Multiplier
+                         and Divider factors, AHB/APBx prescalers and Flash settings).
+   */
+}
+ 8000386:	46c0      	nop			; (mov r8, r8)
+ 8000388:	46bd      	mov	sp, r7
+ 800038a:	bd80      	pop	{r7, pc}
+
+0800038c :
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+  ldr   r0, =_estack
+ 800038c:	480d      	ldr	r0, [pc, #52]	; (80003c4 )
+  mov   sp, r0          /* set stack pointer */
+ 800038e:	4685      	mov	sp, r0
+
+/* Copy the data segment initializers from flash to SRAM */
+  ldr r0, =_sdata
+ 8000390:	480d      	ldr	r0, [pc, #52]	; (80003c8 )
+  ldr r1, =_edata
+ 8000392:	490e      	ldr	r1, [pc, #56]	; (80003cc )
+  ldr r2, =_sidata
+ 8000394:	4a0e      	ldr	r2, [pc, #56]	; (80003d0 )
+  movs r3, #0
+ 8000396:	2300      	movs	r3, #0
+  b LoopCopyDataInit
+ 8000398:	e002      	b.n	80003a0 
+
+0800039a :
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+ 800039a:	58d4      	ldr	r4, [r2, r3]
+  str r4, [r0, r3]
+ 800039c:	50c4      	str	r4, [r0, r3]
+  adds r3, r3, #4
+ 800039e:	3304      	adds	r3, #4
+
+080003a0 :
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+ 80003a0:	18c4      	adds	r4, r0, r3
+  cmp r4, r1
+ 80003a2:	428c      	cmp	r4, r1
+  bcc CopyDataInit
+ 80003a4:	d3f9      	bcc.n	800039a 
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+ 80003a6:	4a0b      	ldr	r2, [pc, #44]	; (80003d4 )
+  ldr r4, =_ebss
+ 80003a8:	4c0b      	ldr	r4, [pc, #44]	; (80003d8 )
+  movs r3, #0
+ 80003aa:	2300      	movs	r3, #0
+  b LoopFillZerobss
+ 80003ac:	e001      	b.n	80003b2 
+
+080003ae :
+
+FillZerobss:
+  str  r3, [r2]
+ 80003ae:	6013      	str	r3, [r2, #0]
+  adds r2, r2, #4
+ 80003b0:	3204      	adds	r2, #4
+
+080003b2 :
+
+LoopFillZerobss:
+  cmp r2, r4
+ 80003b2:	42a2      	cmp	r2, r4
+  bcc FillZerobss
+ 80003b4:	d3fb      	bcc.n	80003ae 
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+ 80003b6:	f7ff ffe4 	bl	8000382 
+/* Call static constructors */
+  bl __libc_init_array
+ 80003ba:	f000 ff27 	bl	800120c <__libc_init_array>
+/* Call the application's entry point.*/
+  bl main
+ 80003be:	f7ff ff2f 	bl	8000220 

+
+080003c2 :
+
+LoopForever:
+    b LoopForever
+ 80003c2:	e7fe      	b.n	80003c2 
+  ldr   r0, =_estack
+ 80003c4:	20001000 	.word	0x20001000
+  ldr r0, =_sdata
+ 80003c8:	20000000 	.word	0x20000000
+  ldr r1, =_edata
+ 80003cc:	2000000c 	.word	0x2000000c
+  ldr r2, =_sidata
+ 80003d0:	080012b4 	.word	0x080012b4
+  ldr r2, =_sbss
+ 80003d4:	2000000c 	.word	0x2000000c
+  ldr r4, =_ebss
+ 80003d8:	2000002c 	.word	0x2000002c
+
+080003dc :
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+ 80003dc:	e7fe      	b.n	80003dc 
+	...
+
+080003e0 :
+  *       In the default implementation,Systick is used as source of time base.
+  *       The tick variable is incremented each 1ms in its ISR.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+ 80003e0:	b580      	push	{r7, lr}
+ 80003e2:	af00      	add	r7, sp, #0
+  /* Configure Flash prefetch */ 
+#if (PREFETCH_ENABLE != 0)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+ 80003e4:	4b07      	ldr	r3, [pc, #28]	; (8000404 )
+ 80003e6:	681a      	ldr	r2, [r3, #0]
+ 80003e8:	4b06      	ldr	r3, [pc, #24]	; (8000404 )
+ 80003ea:	2110      	movs	r1, #16
+ 80003ec:	430a      	orrs	r2, r1
+ 80003ee:	601a      	str	r2, [r3, #0]
+#endif /* PREFETCH_ENABLE */
+
+  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+
+  HAL_InitTick(TICK_INT_PRIORITY);
+ 80003f0:	2000      	movs	r0, #0
+ 80003f2:	f000 f809 	bl	8000408 
+
+  /* Init the low level hardware */
+  HAL_MspInit();
+ 80003f6:	f7ff ff89 	bl	800030c 
+
+  /* Return function status */
+  return HAL_OK;
+ 80003fa:	2300      	movs	r3, #0
+}
+ 80003fc:	0018      	movs	r0, r3
+ 80003fe:	46bd      	mov	sp, r7
+ 8000400:	bd80      	pop	{r7, pc}
+ 8000402:	46c0      	nop			; (mov r8, r8)
+ 8000404:	40022000 	.word	0x40022000
+
+08000408 :
+  *       implementation  in user file.
+  * @param TickPriority Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+ 8000408:	b590      	push	{r4, r7, lr}
+ 800040a:	b083      	sub	sp, #12
+ 800040c:	af00      	add	r7, sp, #0
+ 800040e:	6078      	str	r0, [r7, #4]
+  /*Configure the SysTick to have interrupt in 1ms time basis*/
+  if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
+ 8000410:	4b14      	ldr	r3, [pc, #80]	; (8000464 )
+ 8000412:	681c      	ldr	r4, [r3, #0]
+ 8000414:	4b14      	ldr	r3, [pc, #80]	; (8000468 )
+ 8000416:	781b      	ldrb	r3, [r3, #0]
+ 8000418:	0019      	movs	r1, r3
+ 800041a:	23fa      	movs	r3, #250	; 0xfa
+ 800041c:	0098      	lsls	r0, r3, #2
+ 800041e:	f7ff fe73 	bl	8000108 <__udivsi3>
+ 8000422:	0003      	movs	r3, r0
+ 8000424:	0019      	movs	r1, r3
+ 8000426:	0020      	movs	r0, r4
+ 8000428:	f7ff fe6e 	bl	8000108 <__udivsi3>
+ 800042c:	0003      	movs	r3, r0
+ 800042e:	0018      	movs	r0, r3
+ 8000430:	f000 f903 	bl	800063a 
+ 8000434:	1e03      	subs	r3, r0, #0
+ 8000436:	d001      	beq.n	800043c 
+  {
+    return HAL_ERROR;
+ 8000438:	2301      	movs	r3, #1
+ 800043a:	e00f      	b.n	800045c 
+  }
+
+  /* Configure the SysTick IRQ priority */
+  if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+ 800043c:	687b      	ldr	r3, [r7, #4]
+ 800043e:	2b03      	cmp	r3, #3
+ 8000440:	d80b      	bhi.n	800045a 
+  {
+    HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
+ 8000442:	6879      	ldr	r1, [r7, #4]
+ 8000444:	2301      	movs	r3, #1
+ 8000446:	425b      	negs	r3, r3
+ 8000448:	2200      	movs	r2, #0
+ 800044a:	0018      	movs	r0, r3
+ 800044c:	f000 f8e0 	bl	8000610 
+    uwTickPrio = TickPriority;
+ 8000450:	4b06      	ldr	r3, [pc, #24]	; (800046c )
+ 8000452:	687a      	ldr	r2, [r7, #4]
+ 8000454:	601a      	str	r2, [r3, #0]
+  {
+    return HAL_ERROR;
+  }
+
+   /* Return function status */
+  return HAL_OK;
+ 8000456:	2300      	movs	r3, #0
+ 8000458:	e000      	b.n	800045c 
+    return HAL_ERROR;
+ 800045a:	2301      	movs	r3, #1
+}
+ 800045c:	0018      	movs	r0, r3
+ 800045e:	46bd      	mov	sp, r7
+ 8000460:	b003      	add	sp, #12
+ 8000462:	bd90      	pop	{r4, r7, pc}
+ 8000464:	20000000 	.word	0x20000000
+ 8000468:	20000008 	.word	0x20000008
+ 800046c:	20000004 	.word	0x20000004
+
+08000470 :
+  * @note This function is declared as __weak to be overwritten in case of other 
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+ 8000470:	b580      	push	{r7, lr}
+ 8000472:	af00      	add	r7, sp, #0
+  uwTick += uwTickFreq;
+ 8000474:	4b05      	ldr	r3, [pc, #20]	; (800048c )
+ 8000476:	781b      	ldrb	r3, [r3, #0]
+ 8000478:	001a      	movs	r2, r3
+ 800047a:	4b05      	ldr	r3, [pc, #20]	; (8000490 )
+ 800047c:	681b      	ldr	r3, [r3, #0]
+ 800047e:	18d2      	adds	r2, r2, r3
+ 8000480:	4b03      	ldr	r3, [pc, #12]	; (8000490 )
+ 8000482:	601a      	str	r2, [r3, #0]
+}
+ 8000484:	46c0      	nop			; (mov r8, r8)
+ 8000486:	46bd      	mov	sp, r7
+ 8000488:	bd80      	pop	{r7, pc}
+ 800048a:	46c0      	nop			; (mov r8, r8)
+ 800048c:	20000008 	.word	0x20000008
+ 8000490:	20000028 	.word	0x20000028
+
+08000494 :
+  * @note   This function is declared as __weak  to be overwritten  in case of other 
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+ 8000494:	b580      	push	{r7, lr}
+ 8000496:	af00      	add	r7, sp, #0
+  return uwTick;
+ 8000498:	4b02      	ldr	r3, [pc, #8]	; (80004a4 )
+ 800049a:	681b      	ldr	r3, [r3, #0]
+}
+ 800049c:	0018      	movs	r0, r3
+ 800049e:	46bd      	mov	sp, r7
+ 80004a0:	bd80      	pop	{r7, pc}
+ 80004a2:	46c0      	nop			; (mov r8, r8)
+ 80004a4:	20000028 	.word	0x20000028
+
+080004a8 :
+  *       implementations in user file.
+  * @param Delay specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(uint32_t Delay)
+{
+ 80004a8:	b580      	push	{r7, lr}
+ 80004aa:	b084      	sub	sp, #16
+ 80004ac:	af00      	add	r7, sp, #0
+ 80004ae:	6078      	str	r0, [r7, #4]
+  uint32_t tickstart = HAL_GetTick();
+ 80004b0:	f7ff fff0 	bl	8000494 
+ 80004b4:	0003      	movs	r3, r0
+ 80004b6:	60bb      	str	r3, [r7, #8]
+  uint32_t wait = Delay;
+ 80004b8:	687b      	ldr	r3, [r7, #4]
+ 80004ba:	60fb      	str	r3, [r7, #12]
+  
+  /* Add a freq to guarantee minimum wait */
+  if (wait < HAL_MAX_DELAY)
+ 80004bc:	68fb      	ldr	r3, [r7, #12]
+ 80004be:	3301      	adds	r3, #1
+ 80004c0:	d005      	beq.n	80004ce 
+  {
+    wait += (uint32_t)(uwTickFreq);
+ 80004c2:	4b09      	ldr	r3, [pc, #36]	; (80004e8 )
+ 80004c4:	781b      	ldrb	r3, [r3, #0]
+ 80004c6:	001a      	movs	r2, r3
+ 80004c8:	68fb      	ldr	r3, [r7, #12]
+ 80004ca:	189b      	adds	r3, r3, r2
+ 80004cc:	60fb      	str	r3, [r7, #12]
+  }
+  
+  while((HAL_GetTick() - tickstart) < wait)
+ 80004ce:	46c0      	nop			; (mov r8, r8)
+ 80004d0:	f7ff ffe0 	bl	8000494 
+ 80004d4:	0002      	movs	r2, r0
+ 80004d6:	68bb      	ldr	r3, [r7, #8]
+ 80004d8:	1ad3      	subs	r3, r2, r3
+ 80004da:	68fa      	ldr	r2, [r7, #12]
+ 80004dc:	429a      	cmp	r2, r3
+ 80004de:	d8f7      	bhi.n	80004d0 
+  {
+  }
+}
+ 80004e0:	46c0      	nop			; (mov r8, r8)
+ 80004e2:	46bd      	mov	sp, r7
+ 80004e4:	b004      	add	sp, #16
+ 80004e6:	bd80      	pop	{r7, pc}
+ 80004e8:	20000008 	.word	0x20000008
+
+080004ec <__NVIC_SetPriority>:
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ 80004ec:	b590      	push	{r4, r7, lr}
+ 80004ee:	b083      	sub	sp, #12
+ 80004f0:	af00      	add	r7, sp, #0
+ 80004f2:	0002      	movs	r2, r0
+ 80004f4:	6039      	str	r1, [r7, #0]
+ 80004f6:	1dfb      	adds	r3, r7, #7
+ 80004f8:	701a      	strb	r2, [r3, #0]
+  if ((int32_t)(IRQn) >= 0)
+ 80004fa:	1dfb      	adds	r3, r7, #7
+ 80004fc:	781b      	ldrb	r3, [r3, #0]
+ 80004fe:	2b7f      	cmp	r3, #127	; 0x7f
+ 8000500:	d828      	bhi.n	8000554 <__NVIC_SetPriority+0x68>
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ 8000502:	4a2f      	ldr	r2, [pc, #188]	; (80005c0 <__NVIC_SetPriority+0xd4>)
+ 8000504:	1dfb      	adds	r3, r7, #7
+ 8000506:	781b      	ldrb	r3, [r3, #0]
+ 8000508:	b25b      	sxtb	r3, r3
+ 800050a:	089b      	lsrs	r3, r3, #2
+ 800050c:	33c0      	adds	r3, #192	; 0xc0
+ 800050e:	009b      	lsls	r3, r3, #2
+ 8000510:	589b      	ldr	r3, [r3, r2]
+ 8000512:	1dfa      	adds	r2, r7, #7
+ 8000514:	7812      	ldrb	r2, [r2, #0]
+ 8000516:	0011      	movs	r1, r2
+ 8000518:	2203      	movs	r2, #3
+ 800051a:	400a      	ands	r2, r1
+ 800051c:	00d2      	lsls	r2, r2, #3
+ 800051e:	21ff      	movs	r1, #255	; 0xff
+ 8000520:	4091      	lsls	r1, r2
+ 8000522:	000a      	movs	r2, r1
+ 8000524:	43d2      	mvns	r2, r2
+ 8000526:	401a      	ands	r2, r3
+ 8000528:	0011      	movs	r1, r2
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ 800052a:	683b      	ldr	r3, [r7, #0]
+ 800052c:	019b      	lsls	r3, r3, #6
+ 800052e:	22ff      	movs	r2, #255	; 0xff
+ 8000530:	401a      	ands	r2, r3
+ 8000532:	1dfb      	adds	r3, r7, #7
+ 8000534:	781b      	ldrb	r3, [r3, #0]
+ 8000536:	0018      	movs	r0, r3
+ 8000538:	2303      	movs	r3, #3
+ 800053a:	4003      	ands	r3, r0
+ 800053c:	00db      	lsls	r3, r3, #3
+ 800053e:	409a      	lsls	r2, r3
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ 8000540:	481f      	ldr	r0, [pc, #124]	; (80005c0 <__NVIC_SetPriority+0xd4>)
+ 8000542:	1dfb      	adds	r3, r7, #7
+ 8000544:	781b      	ldrb	r3, [r3, #0]
+ 8000546:	b25b      	sxtb	r3, r3
+ 8000548:	089b      	lsrs	r3, r3, #2
+ 800054a:	430a      	orrs	r2, r1
+ 800054c:	33c0      	adds	r3, #192	; 0xc0
+ 800054e:	009b      	lsls	r3, r3, #2
+ 8000550:	501a      	str	r2, [r3, r0]
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+ 8000552:	e031      	b.n	80005b8 <__NVIC_SetPriority+0xcc>
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ 8000554:	4a1b      	ldr	r2, [pc, #108]	; (80005c4 <__NVIC_SetPriority+0xd8>)
+ 8000556:	1dfb      	adds	r3, r7, #7
+ 8000558:	781b      	ldrb	r3, [r3, #0]
+ 800055a:	0019      	movs	r1, r3
+ 800055c:	230f      	movs	r3, #15
+ 800055e:	400b      	ands	r3, r1
+ 8000560:	3b08      	subs	r3, #8
+ 8000562:	089b      	lsrs	r3, r3, #2
+ 8000564:	3306      	adds	r3, #6
+ 8000566:	009b      	lsls	r3, r3, #2
+ 8000568:	18d3      	adds	r3, r2, r3
+ 800056a:	3304      	adds	r3, #4
+ 800056c:	681b      	ldr	r3, [r3, #0]
+ 800056e:	1dfa      	adds	r2, r7, #7
+ 8000570:	7812      	ldrb	r2, [r2, #0]
+ 8000572:	0011      	movs	r1, r2
+ 8000574:	2203      	movs	r2, #3
+ 8000576:	400a      	ands	r2, r1
+ 8000578:	00d2      	lsls	r2, r2, #3
+ 800057a:	21ff      	movs	r1, #255	; 0xff
+ 800057c:	4091      	lsls	r1, r2
+ 800057e:	000a      	movs	r2, r1
+ 8000580:	43d2      	mvns	r2, r2
+ 8000582:	401a      	ands	r2, r3
+ 8000584:	0011      	movs	r1, r2
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ 8000586:	683b      	ldr	r3, [r7, #0]
+ 8000588:	019b      	lsls	r3, r3, #6
+ 800058a:	22ff      	movs	r2, #255	; 0xff
+ 800058c:	401a      	ands	r2, r3
+ 800058e:	1dfb      	adds	r3, r7, #7
+ 8000590:	781b      	ldrb	r3, [r3, #0]
+ 8000592:	0018      	movs	r0, r3
+ 8000594:	2303      	movs	r3, #3
+ 8000596:	4003      	ands	r3, r0
+ 8000598:	00db      	lsls	r3, r3, #3
+ 800059a:	409a      	lsls	r2, r3
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ 800059c:	4809      	ldr	r0, [pc, #36]	; (80005c4 <__NVIC_SetPriority+0xd8>)
+ 800059e:	1dfb      	adds	r3, r7, #7
+ 80005a0:	781b      	ldrb	r3, [r3, #0]
+ 80005a2:	001c      	movs	r4, r3
+ 80005a4:	230f      	movs	r3, #15
+ 80005a6:	4023      	ands	r3, r4
+ 80005a8:	3b08      	subs	r3, #8
+ 80005aa:	089b      	lsrs	r3, r3, #2
+ 80005ac:	430a      	orrs	r2, r1
+ 80005ae:	3306      	adds	r3, #6
+ 80005b0:	009b      	lsls	r3, r3, #2
+ 80005b2:	18c3      	adds	r3, r0, r3
+ 80005b4:	3304      	adds	r3, #4
+ 80005b6:	601a      	str	r2, [r3, #0]
+}
+ 80005b8:	46c0      	nop			; (mov r8, r8)
+ 80005ba:	46bd      	mov	sp, r7
+ 80005bc:	b003      	add	sp, #12
+ 80005be:	bd90      	pop	{r4, r7, pc}
+ 80005c0:	e000e100 	.word	0xe000e100
+ 80005c4:	e000ed00 	.word	0xe000ed00
+
+080005c8 :
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ 80005c8:	b580      	push	{r7, lr}
+ 80005ca:	b082      	sub	sp, #8
+ 80005cc:	af00      	add	r7, sp, #0
+ 80005ce:	6078      	str	r0, [r7, #4]
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ 80005d0:	687b      	ldr	r3, [r7, #4]
+ 80005d2:	3b01      	subs	r3, #1
+ 80005d4:	4a0c      	ldr	r2, [pc, #48]	; (8000608 )
+ 80005d6:	4293      	cmp	r3, r2
+ 80005d8:	d901      	bls.n	80005de 
+  {
+    return (1UL);                                                   /* Reload value impossible */
+ 80005da:	2301      	movs	r3, #1
+ 80005dc:	e010      	b.n	8000600 
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+ 80005de:	4b0b      	ldr	r3, [pc, #44]	; (800060c )
+ 80005e0:	687a      	ldr	r2, [r7, #4]
+ 80005e2:	3a01      	subs	r2, #1
+ 80005e4:	605a      	str	r2, [r3, #4]
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ 80005e6:	2301      	movs	r3, #1
+ 80005e8:	425b      	negs	r3, r3
+ 80005ea:	2103      	movs	r1, #3
+ 80005ec:	0018      	movs	r0, r3
+ 80005ee:	f7ff ff7d 	bl	80004ec <__NVIC_SetPriority>
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+ 80005f2:	4b06      	ldr	r3, [pc, #24]	; (800060c )
+ 80005f4:	2200      	movs	r2, #0
+ 80005f6:	609a      	str	r2, [r3, #8]
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+ 80005f8:	4b04      	ldr	r3, [pc, #16]	; (800060c )
+ 80005fa:	2207      	movs	r2, #7
+ 80005fc:	601a      	str	r2, [r3, #0]
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+ 80005fe:	2300      	movs	r3, #0
+}
+ 8000600:	0018      	movs	r0, r3
+ 8000602:	46bd      	mov	sp, r7
+ 8000604:	b002      	add	sp, #8
+ 8000606:	bd80      	pop	{r7, pc}
+ 8000608:	00ffffff 	.word	0x00ffffff
+ 800060c:	e000e010 	.word	0xe000e010
+
+08000610 :
+  *         with stm32f0xx devices, this parameter is a dummy value and it is ignored, because 
+  *         no subpriority supported in Cortex M0 based products.   
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{ 
+ 8000610:	b580      	push	{r7, lr}
+ 8000612:	b084      	sub	sp, #16
+ 8000614:	af00      	add	r7, sp, #0
+ 8000616:	60b9      	str	r1, [r7, #8]
+ 8000618:	607a      	str	r2, [r7, #4]
+ 800061a:	210f      	movs	r1, #15
+ 800061c:	187b      	adds	r3, r7, r1
+ 800061e:	1c02      	adds	r2, r0, #0
+ 8000620:	701a      	strb	r2, [r3, #0]
+  /* Check the parameters */
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+  NVIC_SetPriority(IRQn,PreemptPriority);
+ 8000622:	68ba      	ldr	r2, [r7, #8]
+ 8000624:	187b      	adds	r3, r7, r1
+ 8000626:	781b      	ldrb	r3, [r3, #0]
+ 8000628:	b25b      	sxtb	r3, r3
+ 800062a:	0011      	movs	r1, r2
+ 800062c:	0018      	movs	r0, r3
+ 800062e:	f7ff ff5d 	bl	80004ec <__NVIC_SetPriority>
+}
+ 8000632:	46c0      	nop			; (mov r8, r8)
+ 8000634:	46bd      	mov	sp, r7
+ 8000636:	b004      	add	sp, #16
+ 8000638:	bd80      	pop	{r7, pc}
+
+0800063a :
+  * @param  TicksNumb Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+ 800063a:	b580      	push	{r7, lr}
+ 800063c:	b082      	sub	sp, #8
+ 800063e:	af00      	add	r7, sp, #0
+ 8000640:	6078      	str	r0, [r7, #4]
+   return SysTick_Config(TicksNumb);
+ 8000642:	687b      	ldr	r3, [r7, #4]
+ 8000644:	0018      	movs	r0, r3
+ 8000646:	f7ff ffbf 	bl	80005c8 
+ 800064a:	0003      	movs	r3, r0
+}
+ 800064c:	0018      	movs	r0, r3
+ 800064e:	46bd      	mov	sp, r7
+ 8000650:	b002      	add	sp, #8
+ 8000652:	bd80      	pop	{r7, pc}
+
+08000654 :
+  * @param  GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+  *         the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{ 
+ 8000654:	b580      	push	{r7, lr}
+ 8000656:	b086      	sub	sp, #24
+ 8000658:	af00      	add	r7, sp, #0
+ 800065a:	6078      	str	r0, [r7, #4]
+ 800065c:	6039      	str	r1, [r7, #0]
+  uint32_t position = 0x00u;
+ 800065e:	2300      	movs	r3, #0
+ 8000660:	617b      	str	r3, [r7, #20]
+  assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+  assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+  assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+  /* Configure the port pins */
+  while (((GPIO_Init->Pin) >> position) != 0x00u)
+ 8000662:	e14f      	b.n	8000904 
+  {
+    /* Get current io position */
+    iocurrent = (GPIO_Init->Pin) & (1uL << position);
+ 8000664:	683b      	ldr	r3, [r7, #0]
+ 8000666:	681b      	ldr	r3, [r3, #0]
+ 8000668:	2101      	movs	r1, #1
+ 800066a:	697a      	ldr	r2, [r7, #20]
+ 800066c:	4091      	lsls	r1, r2
+ 800066e:	000a      	movs	r2, r1
+ 8000670:	4013      	ands	r3, r2
+ 8000672:	60fb      	str	r3, [r7, #12]
+
+    if (iocurrent != 0x00u)
+ 8000674:	68fb      	ldr	r3, [r7, #12]
+ 8000676:	2b00      	cmp	r3, #0
+ 8000678:	d100      	bne.n	800067c 
+ 800067a:	e140      	b.n	80008fe 
+    {
+      /*--------------------- GPIO Mode Configuration ------------------------*/
+      /* In case of Output or Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ 800067c:	683b      	ldr	r3, [r7, #0]
+ 800067e:	685b      	ldr	r3, [r3, #4]
+ 8000680:	2b01      	cmp	r3, #1
+ 8000682:	d00b      	beq.n	800069c 
+ 8000684:	683b      	ldr	r3, [r7, #0]
+ 8000686:	685b      	ldr	r3, [r3, #4]
+ 8000688:	2b02      	cmp	r3, #2
+ 800068a:	d007      	beq.n	800069c 
+         (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ 800068c:	683b      	ldr	r3, [r7, #0]
+ 800068e:	685b      	ldr	r3, [r3, #4]
+      if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ 8000690:	2b11      	cmp	r3, #17
+ 8000692:	d003      	beq.n	800069c 
+         (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ 8000694:	683b      	ldr	r3, [r7, #0]
+ 8000696:	685b      	ldr	r3, [r3, #4]
+ 8000698:	2b12      	cmp	r3, #18
+ 800069a:	d130      	bne.n	80006fe 
+      {
+        /* Check the Speed parameter */
+        assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+        /* Configure the IO Speed */
+        temp = GPIOx->OSPEEDR;
+ 800069c:	687b      	ldr	r3, [r7, #4]
+ 800069e:	689b      	ldr	r3, [r3, #8]
+ 80006a0:	613b      	str	r3, [r7, #16]
+        temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u));
+ 80006a2:	697b      	ldr	r3, [r7, #20]
+ 80006a4:	005b      	lsls	r3, r3, #1
+ 80006a6:	2203      	movs	r2, #3
+ 80006a8:	409a      	lsls	r2, r3
+ 80006aa:	0013      	movs	r3, r2
+ 80006ac:	43da      	mvns	r2, r3
+ 80006ae:	693b      	ldr	r3, [r7, #16]
+ 80006b0:	4013      	ands	r3, r2
+ 80006b2:	613b      	str	r3, [r7, #16]
+        temp |= (GPIO_Init->Speed << (position * 2u));
+ 80006b4:	683b      	ldr	r3, [r7, #0]
+ 80006b6:	68da      	ldr	r2, [r3, #12]
+ 80006b8:	697b      	ldr	r3, [r7, #20]
+ 80006ba:	005b      	lsls	r3, r3, #1
+ 80006bc:	409a      	lsls	r2, r3
+ 80006be:	0013      	movs	r3, r2
+ 80006c0:	693a      	ldr	r2, [r7, #16]
+ 80006c2:	4313      	orrs	r3, r2
+ 80006c4:	613b      	str	r3, [r7, #16]
+        GPIOx->OSPEEDR = temp;
+ 80006c6:	687b      	ldr	r3, [r7, #4]
+ 80006c8:	693a      	ldr	r2, [r7, #16]
+ 80006ca:	609a      	str	r2, [r3, #8]
+
+        /* Configure the IO Output Type */
+        temp = GPIOx->OTYPER;
+ 80006cc:	687b      	ldr	r3, [r7, #4]
+ 80006ce:	685b      	ldr	r3, [r3, #4]
+ 80006d0:	613b      	str	r3, [r7, #16]
+        temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ 80006d2:	2201      	movs	r2, #1
+ 80006d4:	697b      	ldr	r3, [r7, #20]
+ 80006d6:	409a      	lsls	r2, r3
+ 80006d8:	0013      	movs	r3, r2
+ 80006da:	43da      	mvns	r2, r3
+ 80006dc:	693b      	ldr	r3, [r7, #16]
+ 80006de:	4013      	ands	r3, r2
+ 80006e0:	613b      	str	r3, [r7, #16]
+        temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position);
+ 80006e2:	683b      	ldr	r3, [r7, #0]
+ 80006e4:	685b      	ldr	r3, [r3, #4]
+ 80006e6:	091b      	lsrs	r3, r3, #4
+ 80006e8:	2201      	movs	r2, #1
+ 80006ea:	401a      	ands	r2, r3
+ 80006ec:	697b      	ldr	r3, [r7, #20]
+ 80006ee:	409a      	lsls	r2, r3
+ 80006f0:	0013      	movs	r3, r2
+ 80006f2:	693a      	ldr	r2, [r7, #16]
+ 80006f4:	4313      	orrs	r3, r2
+ 80006f6:	613b      	str	r3, [r7, #16]
+        GPIOx->OTYPER = temp;
+ 80006f8:	687b      	ldr	r3, [r7, #4]
+ 80006fa:	693a      	ldr	r2, [r7, #16]
+ 80006fc:	605a      	str	r2, [r3, #4]
+      }
+
+      /* Activate the Pull-up or Pull down resistor for the current IO */
+      temp = GPIOx->PUPDR;
+ 80006fe:	687b      	ldr	r3, [r7, #4]
+ 8000700:	68db      	ldr	r3, [r3, #12]
+ 8000702:	613b      	str	r3, [r7, #16]
+      temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u));
+ 8000704:	697b      	ldr	r3, [r7, #20]
+ 8000706:	005b      	lsls	r3, r3, #1
+ 8000708:	2203      	movs	r2, #3
+ 800070a:	409a      	lsls	r2, r3
+ 800070c:	0013      	movs	r3, r2
+ 800070e:	43da      	mvns	r2, r3
+ 8000710:	693b      	ldr	r3, [r7, #16]
+ 8000712:	4013      	ands	r3, r2
+ 8000714:	613b      	str	r3, [r7, #16]
+      temp |= ((GPIO_Init->Pull) << (position * 2u));
+ 8000716:	683b      	ldr	r3, [r7, #0]
+ 8000718:	689a      	ldr	r2, [r3, #8]
+ 800071a:	697b      	ldr	r3, [r7, #20]
+ 800071c:	005b      	lsls	r3, r3, #1
+ 800071e:	409a      	lsls	r2, r3
+ 8000720:	0013      	movs	r3, r2
+ 8000722:	693a      	ldr	r2, [r7, #16]
+ 8000724:	4313      	orrs	r3, r2
+ 8000726:	613b      	str	r3, [r7, #16]
+      GPIOx->PUPDR = temp;
+ 8000728:	687b      	ldr	r3, [r7, #4]
+ 800072a:	693a      	ldr	r2, [r7, #16]
+ 800072c:	60da      	str	r2, [r3, #12]
+
+      /* In case of Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ 800072e:	683b      	ldr	r3, [r7, #0]
+ 8000730:	685b      	ldr	r3, [r3, #4]
+ 8000732:	2b02      	cmp	r3, #2
+ 8000734:	d003      	beq.n	800073e 
+ 8000736:	683b      	ldr	r3, [r7, #0]
+ 8000738:	685b      	ldr	r3, [r3, #4]
+ 800073a:	2b12      	cmp	r3, #18
+ 800073c:	d123      	bne.n	8000786 
+        /* Check the Alternate function parameters */
+        assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
+        assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+        /* Configure Alternate function mapped with the current IO */
+        temp = GPIOx->AFR[position >> 3u];
+ 800073e:	697b      	ldr	r3, [r7, #20]
+ 8000740:	08da      	lsrs	r2, r3, #3
+ 8000742:	687b      	ldr	r3, [r7, #4]
+ 8000744:	3208      	adds	r2, #8
+ 8000746:	0092      	lsls	r2, r2, #2
+ 8000748:	58d3      	ldr	r3, [r2, r3]
+ 800074a:	613b      	str	r3, [r7, #16]
+        temp &= ~(0xFu << ((position & 0x07u) * 4u));
+ 800074c:	697b      	ldr	r3, [r7, #20]
+ 800074e:	2207      	movs	r2, #7
+ 8000750:	4013      	ands	r3, r2
+ 8000752:	009b      	lsls	r3, r3, #2
+ 8000754:	220f      	movs	r2, #15
+ 8000756:	409a      	lsls	r2, r3
+ 8000758:	0013      	movs	r3, r2
+ 800075a:	43da      	mvns	r2, r3
+ 800075c:	693b      	ldr	r3, [r7, #16]
+ 800075e:	4013      	ands	r3, r2
+ 8000760:	613b      	str	r3, [r7, #16]
+        temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u));
+ 8000762:	683b      	ldr	r3, [r7, #0]
+ 8000764:	691a      	ldr	r2, [r3, #16]
+ 8000766:	697b      	ldr	r3, [r7, #20]
+ 8000768:	2107      	movs	r1, #7
+ 800076a:	400b      	ands	r3, r1
+ 800076c:	009b      	lsls	r3, r3, #2
+ 800076e:	409a      	lsls	r2, r3
+ 8000770:	0013      	movs	r3, r2
+ 8000772:	693a      	ldr	r2, [r7, #16]
+ 8000774:	4313      	orrs	r3, r2
+ 8000776:	613b      	str	r3, [r7, #16]
+        GPIOx->AFR[position >> 3u] = temp;
+ 8000778:	697b      	ldr	r3, [r7, #20]
+ 800077a:	08da      	lsrs	r2, r3, #3
+ 800077c:	687b      	ldr	r3, [r7, #4]
+ 800077e:	3208      	adds	r2, #8
+ 8000780:	0092      	lsls	r2, r2, #2
+ 8000782:	6939      	ldr	r1, [r7, #16]
+ 8000784:	50d1      	str	r1, [r2, r3]
+      }
+
+      /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+      temp = GPIOx->MODER;
+ 8000786:	687b      	ldr	r3, [r7, #4]
+ 8000788:	681b      	ldr	r3, [r3, #0]
+ 800078a:	613b      	str	r3, [r7, #16]
+      temp &= ~(GPIO_MODER_MODER0 << (position * 2u));
+ 800078c:	697b      	ldr	r3, [r7, #20]
+ 800078e:	005b      	lsls	r3, r3, #1
+ 8000790:	2203      	movs	r2, #3
+ 8000792:	409a      	lsls	r2, r3
+ 8000794:	0013      	movs	r3, r2
+ 8000796:	43da      	mvns	r2, r3
+ 8000798:	693b      	ldr	r3, [r7, #16]
+ 800079a:	4013      	ands	r3, r2
+ 800079c:	613b      	str	r3, [r7, #16]
+      temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u));
+ 800079e:	683b      	ldr	r3, [r7, #0]
+ 80007a0:	685b      	ldr	r3, [r3, #4]
+ 80007a2:	2203      	movs	r2, #3
+ 80007a4:	401a      	ands	r2, r3
+ 80007a6:	697b      	ldr	r3, [r7, #20]
+ 80007a8:	005b      	lsls	r3, r3, #1
+ 80007aa:	409a      	lsls	r2, r3
+ 80007ac:	0013      	movs	r3, r2
+ 80007ae:	693a      	ldr	r2, [r7, #16]
+ 80007b0:	4313      	orrs	r3, r2
+ 80007b2:	613b      	str	r3, [r7, #16]
+      GPIOx->MODER = temp;
+ 80007b4:	687b      	ldr	r3, [r7, #4]
+ 80007b6:	693a      	ldr	r2, [r7, #16]
+ 80007b8:	601a      	str	r2, [r3, #0]
+
+      /*--------------------- EXTI Mode Configuration ------------------------*/
+      /* Configure the External Interrupt or event for the current IO */
+      if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ 80007ba:	683b      	ldr	r3, [r7, #0]
+ 80007bc:	685a      	ldr	r2, [r3, #4]
+ 80007be:	2380      	movs	r3, #128	; 0x80
+ 80007c0:	055b      	lsls	r3, r3, #21
+ 80007c2:	4013      	ands	r3, r2
+ 80007c4:	d100      	bne.n	80007c8 
+ 80007c6:	e09a      	b.n	80008fe 
+      {
+        /* Enable SYSCFG Clock */
+        __HAL_RCC_SYSCFG_CLK_ENABLE();
+ 80007c8:	4b54      	ldr	r3, [pc, #336]	; (800091c )
+ 80007ca:	699a      	ldr	r2, [r3, #24]
+ 80007cc:	4b53      	ldr	r3, [pc, #332]	; (800091c )
+ 80007ce:	2101      	movs	r1, #1
+ 80007d0:	430a      	orrs	r2, r1
+ 80007d2:	619a      	str	r2, [r3, #24]
+ 80007d4:	4b51      	ldr	r3, [pc, #324]	; (800091c )
+ 80007d6:	699b      	ldr	r3, [r3, #24]
+ 80007d8:	2201      	movs	r2, #1
+ 80007da:	4013      	ands	r3, r2
+ 80007dc:	60bb      	str	r3, [r7, #8]
+ 80007de:	68bb      	ldr	r3, [r7, #8]
+
+        temp = SYSCFG->EXTICR[position >> 2u];
+ 80007e0:	4a4f      	ldr	r2, [pc, #316]	; (8000920 )
+ 80007e2:	697b      	ldr	r3, [r7, #20]
+ 80007e4:	089b      	lsrs	r3, r3, #2
+ 80007e6:	3302      	adds	r3, #2
+ 80007e8:	009b      	lsls	r3, r3, #2
+ 80007ea:	589b      	ldr	r3, [r3, r2]
+ 80007ec:	613b      	str	r3, [r7, #16]
+        temp &= ~(0x0FuL << (4u * (position & 0x03u)));
+ 80007ee:	697b      	ldr	r3, [r7, #20]
+ 80007f0:	2203      	movs	r2, #3
+ 80007f2:	4013      	ands	r3, r2
+ 80007f4:	009b      	lsls	r3, r3, #2
+ 80007f6:	220f      	movs	r2, #15
+ 80007f8:	409a      	lsls	r2, r3
+ 80007fa:	0013      	movs	r3, r2
+ 80007fc:	43da      	mvns	r2, r3
+ 80007fe:	693b      	ldr	r3, [r7, #16]
+ 8000800:	4013      	ands	r3, r2
+ 8000802:	613b      	str	r3, [r7, #16]
+        temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)));
+ 8000804:	687a      	ldr	r2, [r7, #4]
+ 8000806:	2390      	movs	r3, #144	; 0x90
+ 8000808:	05db      	lsls	r3, r3, #23
+ 800080a:	429a      	cmp	r2, r3
+ 800080c:	d013      	beq.n	8000836 
+ 800080e:	687b      	ldr	r3, [r7, #4]
+ 8000810:	4a44      	ldr	r2, [pc, #272]	; (8000924 )
+ 8000812:	4293      	cmp	r3, r2
+ 8000814:	d00d      	beq.n	8000832 
+ 8000816:	687b      	ldr	r3, [r7, #4]
+ 8000818:	4a43      	ldr	r2, [pc, #268]	; (8000928 )
+ 800081a:	4293      	cmp	r3, r2
+ 800081c:	d007      	beq.n	800082e 
+ 800081e:	687b      	ldr	r3, [r7, #4]
+ 8000820:	4a42      	ldr	r2, [pc, #264]	; (800092c )
+ 8000822:	4293      	cmp	r3, r2
+ 8000824:	d101      	bne.n	800082a 
+ 8000826:	2303      	movs	r3, #3
+ 8000828:	e006      	b.n	8000838 
+ 800082a:	2305      	movs	r3, #5
+ 800082c:	e004      	b.n	8000838 
+ 800082e:	2302      	movs	r3, #2
+ 8000830:	e002      	b.n	8000838 
+ 8000832:	2301      	movs	r3, #1
+ 8000834:	e000      	b.n	8000838 
+ 8000836:	2300      	movs	r3, #0
+ 8000838:	697a      	ldr	r2, [r7, #20]
+ 800083a:	2103      	movs	r1, #3
+ 800083c:	400a      	ands	r2, r1
+ 800083e:	0092      	lsls	r2, r2, #2
+ 8000840:	4093      	lsls	r3, r2
+ 8000842:	693a      	ldr	r2, [r7, #16]
+ 8000844:	4313      	orrs	r3, r2
+ 8000846:	613b      	str	r3, [r7, #16]
+        SYSCFG->EXTICR[position >> 2u] = temp;
+ 8000848:	4935      	ldr	r1, [pc, #212]	; (8000920 )
+ 800084a:	697b      	ldr	r3, [r7, #20]
+ 800084c:	089b      	lsrs	r3, r3, #2
+ 800084e:	3302      	adds	r3, #2
+ 8000850:	009b      	lsls	r3, r3, #2
+ 8000852:	693a      	ldr	r2, [r7, #16]
+ 8000854:	505a      	str	r2, [r3, r1]
+
+        /* Clear EXTI line configuration */
+        temp = EXTI->IMR;
+ 8000856:	4b36      	ldr	r3, [pc, #216]	; (8000930 )
+ 8000858:	681b      	ldr	r3, [r3, #0]
+ 800085a:	613b      	str	r3, [r7, #16]
+        temp &= ~(iocurrent);
+ 800085c:	68fb      	ldr	r3, [r7, #12]
+ 800085e:	43da      	mvns	r2, r3
+ 8000860:	693b      	ldr	r3, [r7, #16]
+ 8000862:	4013      	ands	r3, r2
+ 8000864:	613b      	str	r3, [r7, #16]
+        if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ 8000866:	683b      	ldr	r3, [r7, #0]
+ 8000868:	685a      	ldr	r2, [r3, #4]
+ 800086a:	2380      	movs	r3, #128	; 0x80
+ 800086c:	025b      	lsls	r3, r3, #9
+ 800086e:	4013      	ands	r3, r2
+ 8000870:	d003      	beq.n	800087a 
+        {
+          temp |= iocurrent;
+ 8000872:	693a      	ldr	r2, [r7, #16]
+ 8000874:	68fb      	ldr	r3, [r7, #12]
+ 8000876:	4313      	orrs	r3, r2
+ 8000878:	613b      	str	r3, [r7, #16]
+        }
+        EXTI->IMR = temp;
+ 800087a:	4b2d      	ldr	r3, [pc, #180]	; (8000930 )
+ 800087c:	693a      	ldr	r2, [r7, #16]
+ 800087e:	601a      	str	r2, [r3, #0]
+
+        temp = EXTI->EMR;
+ 8000880:	4b2b      	ldr	r3, [pc, #172]	; (8000930 )
+ 8000882:	685b      	ldr	r3, [r3, #4]
+ 8000884:	613b      	str	r3, [r7, #16]
+        temp &= ~(iocurrent);
+ 8000886:	68fb      	ldr	r3, [r7, #12]
+ 8000888:	43da      	mvns	r2, r3
+ 800088a:	693b      	ldr	r3, [r7, #16]
+ 800088c:	4013      	ands	r3, r2
+ 800088e:	613b      	str	r3, [r7, #16]
+        if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ 8000890:	683b      	ldr	r3, [r7, #0]
+ 8000892:	685a      	ldr	r2, [r3, #4]
+ 8000894:	2380      	movs	r3, #128	; 0x80
+ 8000896:	029b      	lsls	r3, r3, #10
+ 8000898:	4013      	ands	r3, r2
+ 800089a:	d003      	beq.n	80008a4 
+        {
+          temp |= iocurrent;
+ 800089c:	693a      	ldr	r2, [r7, #16]
+ 800089e:	68fb      	ldr	r3, [r7, #12]
+ 80008a0:	4313      	orrs	r3, r2
+ 80008a2:	613b      	str	r3, [r7, #16]
+        }
+        EXTI->EMR = temp;
+ 80008a4:	4b22      	ldr	r3, [pc, #136]	; (8000930 )
+ 80008a6:	693a      	ldr	r2, [r7, #16]
+ 80008a8:	605a      	str	r2, [r3, #4]
+
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR;
+ 80008aa:	4b21      	ldr	r3, [pc, #132]	; (8000930 )
+ 80008ac:	689b      	ldr	r3, [r3, #8]
+ 80008ae:	613b      	str	r3, [r7, #16]
+        temp &= ~(iocurrent);
+ 80008b0:	68fb      	ldr	r3, [r7, #12]
+ 80008b2:	43da      	mvns	r2, r3
+ 80008b4:	693b      	ldr	r3, [r7, #16]
+ 80008b6:	4013      	ands	r3, r2
+ 80008b8:	613b      	str	r3, [r7, #16]
+        if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ 80008ba:	683b      	ldr	r3, [r7, #0]
+ 80008bc:	685a      	ldr	r2, [r3, #4]
+ 80008be:	2380      	movs	r3, #128	; 0x80
+ 80008c0:	035b      	lsls	r3, r3, #13
+ 80008c2:	4013      	ands	r3, r2
+ 80008c4:	d003      	beq.n	80008ce 
+        {
+          temp |= iocurrent;
+ 80008c6:	693a      	ldr	r2, [r7, #16]
+ 80008c8:	68fb      	ldr	r3, [r7, #12]
+ 80008ca:	4313      	orrs	r3, r2
+ 80008cc:	613b      	str	r3, [r7, #16]
+        }
+        EXTI->RTSR = temp;
+ 80008ce:	4b18      	ldr	r3, [pc, #96]	; (8000930 )
+ 80008d0:	693a      	ldr	r2, [r7, #16]
+ 80008d2:	609a      	str	r2, [r3, #8]
+
+        temp = EXTI->FTSR;
+ 80008d4:	4b16      	ldr	r3, [pc, #88]	; (8000930 )
+ 80008d6:	68db      	ldr	r3, [r3, #12]
+ 80008d8:	613b      	str	r3, [r7, #16]
+        temp &= ~(iocurrent);
+ 80008da:	68fb      	ldr	r3, [r7, #12]
+ 80008dc:	43da      	mvns	r2, r3
+ 80008de:	693b      	ldr	r3, [r7, #16]
+ 80008e0:	4013      	ands	r3, r2
+ 80008e2:	613b      	str	r3, [r7, #16]
+        if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ 80008e4:	683b      	ldr	r3, [r7, #0]
+ 80008e6:	685a      	ldr	r2, [r3, #4]
+ 80008e8:	2380      	movs	r3, #128	; 0x80
+ 80008ea:	039b      	lsls	r3, r3, #14
+ 80008ec:	4013      	ands	r3, r2
+ 80008ee:	d003      	beq.n	80008f8 
+        {
+          temp |= iocurrent;
+ 80008f0:	693a      	ldr	r2, [r7, #16]
+ 80008f2:	68fb      	ldr	r3, [r7, #12]
+ 80008f4:	4313      	orrs	r3, r2
+ 80008f6:	613b      	str	r3, [r7, #16]
+        }
+        EXTI->FTSR = temp;
+ 80008f8:	4b0d      	ldr	r3, [pc, #52]	; (8000930 )
+ 80008fa:	693a      	ldr	r2, [r7, #16]
+ 80008fc:	60da      	str	r2, [r3, #12]
+      }
+    }
+
+    position++;
+ 80008fe:	697b      	ldr	r3, [r7, #20]
+ 8000900:	3301      	adds	r3, #1
+ 8000902:	617b      	str	r3, [r7, #20]
+  while (((GPIO_Init->Pin) >> position) != 0x00u)
+ 8000904:	683b      	ldr	r3, [r7, #0]
+ 8000906:	681a      	ldr	r2, [r3, #0]
+ 8000908:	697b      	ldr	r3, [r7, #20]
+ 800090a:	40da      	lsrs	r2, r3
+ 800090c:	1e13      	subs	r3, r2, #0
+ 800090e:	d000      	beq.n	8000912 
+ 8000910:	e6a8      	b.n	8000664 
+  } 
+}
+ 8000912:	46c0      	nop			; (mov r8, r8)
+ 8000914:	46bd      	mov	sp, r7
+ 8000916:	b006      	add	sp, #24
+ 8000918:	bd80      	pop	{r7, pc}
+ 800091a:	46c0      	nop			; (mov r8, r8)
+ 800091c:	40021000 	.word	0x40021000
+ 8000920:	40010000 	.word	0x40010000
+ 8000924:	48000400 	.word	0x48000400
+ 8000928:	48000800 	.word	0x48000800
+ 800092c:	48000c00 	.word	0x48000c00
+ 8000930:	40010400 	.word	0x40010400
+
+08000934 :
+  *            @arg GPIO_PIN_RESET: to clear the port pin
+  *            @arg GPIO_PIN_SET: to set the port pin
+  * @retval None
+  */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ 8000934:	b580      	push	{r7, lr}
+ 8000936:	b082      	sub	sp, #8
+ 8000938:	af00      	add	r7, sp, #0
+ 800093a:	6078      	str	r0, [r7, #4]
+ 800093c:	0008      	movs	r0, r1
+ 800093e:	0011      	movs	r1, r2
+ 8000940:	1cbb      	adds	r3, r7, #2
+ 8000942:	1c02      	adds	r2, r0, #0
+ 8000944:	801a      	strh	r2, [r3, #0]
+ 8000946:	1c7b      	adds	r3, r7, #1
+ 8000948:	1c0a      	adds	r2, r1, #0
+ 800094a:	701a      	strb	r2, [r3, #0]
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+  if (PinState != GPIO_PIN_RESET)
+ 800094c:	1c7b      	adds	r3, r7, #1
+ 800094e:	781b      	ldrb	r3, [r3, #0]
+ 8000950:	2b00      	cmp	r3, #0
+ 8000952:	d004      	beq.n	800095e 
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin;
+ 8000954:	1cbb      	adds	r3, r7, #2
+ 8000956:	881a      	ldrh	r2, [r3, #0]
+ 8000958:	687b      	ldr	r3, [r7, #4]
+ 800095a:	619a      	str	r2, [r3, #24]
+  }
+  else
+  {
+    GPIOx->BRR = (uint32_t)GPIO_Pin;
+  }
+}
+ 800095c:	e003      	b.n	8000966 
+    GPIOx->BRR = (uint32_t)GPIO_Pin;
+ 800095e:	1cbb      	adds	r3, r7, #2
+ 8000960:	881a      	ldrh	r2, [r3, #0]
+ 8000962:	687b      	ldr	r3, [r7, #4]
+ 8000964:	629a      	str	r2, [r3, #40]	; 0x28
+}
+ 8000966:	46c0      	nop			; (mov r8, r8)
+ 8000968:	46bd      	mov	sp, r7
+ 800096a:	b002      	add	sp, #8
+ 800096c:	bd80      	pop	{r7, pc}
+	...
+
+08000970 :
+  *         supported by this macro. User should request a transition to HSE Off
+  *         first and then HSE On or HSE Bypass.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+ 8000970:	b580      	push	{r7, lr}
+ 8000972:	b088      	sub	sp, #32
+ 8000974:	af00      	add	r7, sp, #0
+ 8000976:	6078      	str	r0, [r7, #4]
+  uint32_t tickstart;
+  uint32_t pll_config;
+  uint32_t pll_config2;
+
+  /* Check Null pointer */
+  if(RCC_OscInitStruct == NULL)
+ 8000978:	687b      	ldr	r3, [r7, #4]
+ 800097a:	2b00      	cmp	r3, #0
+ 800097c:	d101      	bne.n	8000982 
+  {
+    return HAL_ERROR;
+ 800097e:	2301      	movs	r3, #1
+ 8000980:	e303      	b.n	8000f8a 
+
+  /* Check the parameters */
+  assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+
+  /*------------------------------- HSE Configuration ------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ 8000982:	687b      	ldr	r3, [r7, #4]
+ 8000984:	681b      	ldr	r3, [r3, #0]
+ 8000986:	2201      	movs	r2, #1
+ 8000988:	4013      	ands	r3, r2
+ 800098a:	d100      	bne.n	800098e 
+ 800098c:	e08d      	b.n	8000aaa 
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+
+    /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) 
+ 800098e:	4bc4      	ldr	r3, [pc, #784]	; (8000ca0 )
+ 8000990:	685b      	ldr	r3, [r3, #4]
+ 8000992:	220c      	movs	r2, #12
+ 8000994:	4013      	ands	r3, r2
+ 8000996:	2b04      	cmp	r3, #4
+ 8000998:	d00e      	beq.n	80009b8 
+       || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)))
+ 800099a:	4bc1      	ldr	r3, [pc, #772]	; (8000ca0 )
+ 800099c:	685b      	ldr	r3, [r3, #4]
+ 800099e:	220c      	movs	r2, #12
+ 80009a0:	4013      	ands	r3, r2
+ 80009a2:	2b08      	cmp	r3, #8
+ 80009a4:	d116      	bne.n	80009d4 
+ 80009a6:	4bbe      	ldr	r3, [pc, #760]	; (8000ca0 )
+ 80009a8:	685a      	ldr	r2, [r3, #4]
+ 80009aa:	2380      	movs	r3, #128	; 0x80
+ 80009ac:	025b      	lsls	r3, r3, #9
+ 80009ae:	401a      	ands	r2, r3
+ 80009b0:	2380      	movs	r3, #128	; 0x80
+ 80009b2:	025b      	lsls	r3, r3, #9
+ 80009b4:	429a      	cmp	r2, r3
+ 80009b6:	d10d      	bne.n	80009d4 
+    {
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ 80009b8:	4bb9      	ldr	r3, [pc, #740]	; (8000ca0 )
+ 80009ba:	681a      	ldr	r2, [r3, #0]
+ 80009bc:	2380      	movs	r3, #128	; 0x80
+ 80009be:	029b      	lsls	r3, r3, #10
+ 80009c0:	4013      	ands	r3, r2
+ 80009c2:	d100      	bne.n	80009c6 
+ 80009c4:	e070      	b.n	8000aa8 
+ 80009c6:	687b      	ldr	r3, [r7, #4]
+ 80009c8:	685b      	ldr	r3, [r3, #4]
+ 80009ca:	2b00      	cmp	r3, #0
+ 80009cc:	d000      	beq.n	80009d0 
+ 80009ce:	e06b      	b.n	8000aa8 
+      {
+        return HAL_ERROR;
+ 80009d0:	2301      	movs	r3, #1
+ 80009d2:	e2da      	b.n	8000f8a 
+      }
+    }
+    else
+    {
+      /* Set the new HSE configuration ---------------------------------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+ 80009d4:	687b      	ldr	r3, [r7, #4]
+ 80009d6:	685b      	ldr	r3, [r3, #4]
+ 80009d8:	2b01      	cmp	r3, #1
+ 80009da:	d107      	bne.n	80009ec 
+ 80009dc:	4bb0      	ldr	r3, [pc, #704]	; (8000ca0 )
+ 80009de:	681a      	ldr	r2, [r3, #0]
+ 80009e0:	4baf      	ldr	r3, [pc, #700]	; (8000ca0 )
+ 80009e2:	2180      	movs	r1, #128	; 0x80
+ 80009e4:	0249      	lsls	r1, r1, #9
+ 80009e6:	430a      	orrs	r2, r1
+ 80009e8:	601a      	str	r2, [r3, #0]
+ 80009ea:	e02f      	b.n	8000a4c 
+ 80009ec:	687b      	ldr	r3, [r7, #4]
+ 80009ee:	685b      	ldr	r3, [r3, #4]
+ 80009f0:	2b00      	cmp	r3, #0
+ 80009f2:	d10c      	bne.n	8000a0e 
+ 80009f4:	4baa      	ldr	r3, [pc, #680]	; (8000ca0 )
+ 80009f6:	681a      	ldr	r2, [r3, #0]
+ 80009f8:	4ba9      	ldr	r3, [pc, #676]	; (8000ca0 )
+ 80009fa:	49aa      	ldr	r1, [pc, #680]	; (8000ca4 )
+ 80009fc:	400a      	ands	r2, r1
+ 80009fe:	601a      	str	r2, [r3, #0]
+ 8000a00:	4ba7      	ldr	r3, [pc, #668]	; (8000ca0 )
+ 8000a02:	681a      	ldr	r2, [r3, #0]
+ 8000a04:	4ba6      	ldr	r3, [pc, #664]	; (8000ca0 )
+ 8000a06:	49a8      	ldr	r1, [pc, #672]	; (8000ca8 )
+ 8000a08:	400a      	ands	r2, r1
+ 8000a0a:	601a      	str	r2, [r3, #0]
+ 8000a0c:	e01e      	b.n	8000a4c 
+ 8000a0e:	687b      	ldr	r3, [r7, #4]
+ 8000a10:	685b      	ldr	r3, [r3, #4]
+ 8000a12:	2b05      	cmp	r3, #5
+ 8000a14:	d10e      	bne.n	8000a34 
+ 8000a16:	4ba2      	ldr	r3, [pc, #648]	; (8000ca0 )
+ 8000a18:	681a      	ldr	r2, [r3, #0]
+ 8000a1a:	4ba1      	ldr	r3, [pc, #644]	; (8000ca0 )
+ 8000a1c:	2180      	movs	r1, #128	; 0x80
+ 8000a1e:	02c9      	lsls	r1, r1, #11
+ 8000a20:	430a      	orrs	r2, r1
+ 8000a22:	601a      	str	r2, [r3, #0]
+ 8000a24:	4b9e      	ldr	r3, [pc, #632]	; (8000ca0 )
+ 8000a26:	681a      	ldr	r2, [r3, #0]
+ 8000a28:	4b9d      	ldr	r3, [pc, #628]	; (8000ca0 )
+ 8000a2a:	2180      	movs	r1, #128	; 0x80
+ 8000a2c:	0249      	lsls	r1, r1, #9
+ 8000a2e:	430a      	orrs	r2, r1
+ 8000a30:	601a      	str	r2, [r3, #0]
+ 8000a32:	e00b      	b.n	8000a4c 
+ 8000a34:	4b9a      	ldr	r3, [pc, #616]	; (8000ca0 )
+ 8000a36:	681a      	ldr	r2, [r3, #0]
+ 8000a38:	4b99      	ldr	r3, [pc, #612]	; (8000ca0 )
+ 8000a3a:	499a      	ldr	r1, [pc, #616]	; (8000ca4 )
+ 8000a3c:	400a      	ands	r2, r1
+ 8000a3e:	601a      	str	r2, [r3, #0]
+ 8000a40:	4b97      	ldr	r3, [pc, #604]	; (8000ca0 )
+ 8000a42:	681a      	ldr	r2, [r3, #0]
+ 8000a44:	4b96      	ldr	r3, [pc, #600]	; (8000ca0 )
+ 8000a46:	4998      	ldr	r1, [pc, #608]	; (8000ca8 )
+ 8000a48:	400a      	ands	r2, r1
+ 8000a4a:	601a      	str	r2, [r3, #0]
+      
+
+       /* Check the HSE State */
+      if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+ 8000a4c:	687b      	ldr	r3, [r7, #4]
+ 8000a4e:	685b      	ldr	r3, [r3, #4]
+ 8000a50:	2b00      	cmp	r3, #0
+ 8000a52:	d014      	beq.n	8000a7e 
+      {
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+ 8000a54:	f7ff fd1e 	bl	8000494 
+ 8000a58:	0003      	movs	r3, r0
+ 8000a5a:	61bb      	str	r3, [r7, #24]
+        
+        /* Wait till HSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ 8000a5c:	e008      	b.n	8000a70 
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ 8000a5e:	f7ff fd19 	bl	8000494 
+ 8000a62:	0002      	movs	r2, r0
+ 8000a64:	69bb      	ldr	r3, [r7, #24]
+ 8000a66:	1ad3      	subs	r3, r2, r3
+ 8000a68:	2b64      	cmp	r3, #100	; 0x64
+ 8000a6a:	d901      	bls.n	8000a70 
+          {
+            return HAL_TIMEOUT;
+ 8000a6c:	2303      	movs	r3, #3
+ 8000a6e:	e28c      	b.n	8000f8a 
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ 8000a70:	4b8b      	ldr	r3, [pc, #556]	; (8000ca0 )
+ 8000a72:	681a      	ldr	r2, [r3, #0]
+ 8000a74:	2380      	movs	r3, #128	; 0x80
+ 8000a76:	029b      	lsls	r3, r3, #10
+ 8000a78:	4013      	ands	r3, r2
+ 8000a7a:	d0f0      	beq.n	8000a5e 
+ 8000a7c:	e015      	b.n	8000aaa 
+        }
+      }
+      else
+      {
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+ 8000a7e:	f7ff fd09 	bl	8000494 
+ 8000a82:	0003      	movs	r3, r0
+ 8000a84:	61bb      	str	r3, [r7, #24]
+        
+        /* Wait till HSE is disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ 8000a86:	e008      	b.n	8000a9a 
+        {
+           if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ 8000a88:	f7ff fd04 	bl	8000494 
+ 8000a8c:	0002      	movs	r2, r0
+ 8000a8e:	69bb      	ldr	r3, [r7, #24]
+ 8000a90:	1ad3      	subs	r3, r2, r3
+ 8000a92:	2b64      	cmp	r3, #100	; 0x64
+ 8000a94:	d901      	bls.n	8000a9a 
+          {
+            return HAL_TIMEOUT;
+ 8000a96:	2303      	movs	r3, #3
+ 8000a98:	e277      	b.n	8000f8a 
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ 8000a9a:	4b81      	ldr	r3, [pc, #516]	; (8000ca0 )
+ 8000a9c:	681a      	ldr	r2, [r3, #0]
+ 8000a9e:	2380      	movs	r3, #128	; 0x80
+ 8000aa0:	029b      	lsls	r3, r3, #10
+ 8000aa2:	4013      	ands	r3, r2
+ 8000aa4:	d1f0      	bne.n	8000a88 
+ 8000aa6:	e000      	b.n	8000aaa 
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ 8000aa8:	46c0      	nop			; (mov r8, r8)
+        }
+      }
+    }
+  }
+  /*----------------------------- HSI Configuration --------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ 8000aaa:	687b      	ldr	r3, [r7, #4]
+ 8000aac:	681b      	ldr	r3, [r3, #0]
+ 8000aae:	2202      	movs	r2, #2
+ 8000ab0:	4013      	ands	r3, r2
+ 8000ab2:	d100      	bne.n	8000ab6 
+ 8000ab4:	e069      	b.n	8000b8a 
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+    
+    /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ 
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) 
+ 8000ab6:	4b7a      	ldr	r3, [pc, #488]	; (8000ca0 )
+ 8000ab8:	685b      	ldr	r3, [r3, #4]
+ 8000aba:	220c      	movs	r2, #12
+ 8000abc:	4013      	ands	r3, r2
+ 8000abe:	d00b      	beq.n	8000ad8 
+       || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI)))
+ 8000ac0:	4b77      	ldr	r3, [pc, #476]	; (8000ca0 )
+ 8000ac2:	685b      	ldr	r3, [r3, #4]
+ 8000ac4:	220c      	movs	r2, #12
+ 8000ac6:	4013      	ands	r3, r2
+ 8000ac8:	2b08      	cmp	r3, #8
+ 8000aca:	d11c      	bne.n	8000b06 
+ 8000acc:	4b74      	ldr	r3, [pc, #464]	; (8000ca0 )
+ 8000ace:	685a      	ldr	r2, [r3, #4]
+ 8000ad0:	2380      	movs	r3, #128	; 0x80
+ 8000ad2:	025b      	lsls	r3, r3, #9
+ 8000ad4:	4013      	ands	r3, r2
+ 8000ad6:	d116      	bne.n	8000b06 
+    {
+      /* When HSI is used as system clock it will not disabled */
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ 8000ad8:	4b71      	ldr	r3, [pc, #452]	; (8000ca0 )
+ 8000ada:	681b      	ldr	r3, [r3, #0]
+ 8000adc:	2202      	movs	r2, #2
+ 8000ade:	4013      	ands	r3, r2
+ 8000ae0:	d005      	beq.n	8000aee 
+ 8000ae2:	687b      	ldr	r3, [r7, #4]
+ 8000ae4:	68db      	ldr	r3, [r3, #12]
+ 8000ae6:	2b01      	cmp	r3, #1
+ 8000ae8:	d001      	beq.n	8000aee 
+      {
+        return HAL_ERROR;
+ 8000aea:	2301      	movs	r3, #1
+ 8000aec:	e24d      	b.n	8000f8a 
+      }
+      /* Otherwise, just the calibration is allowed */
+      else
+      {
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ 8000aee:	4b6c      	ldr	r3, [pc, #432]	; (8000ca0 )
+ 8000af0:	681b      	ldr	r3, [r3, #0]
+ 8000af2:	22f8      	movs	r2, #248	; 0xf8
+ 8000af4:	4393      	bics	r3, r2
+ 8000af6:	0019      	movs	r1, r3
+ 8000af8:	687b      	ldr	r3, [r7, #4]
+ 8000afa:	691b      	ldr	r3, [r3, #16]
+ 8000afc:	00da      	lsls	r2, r3, #3
+ 8000afe:	4b68      	ldr	r3, [pc, #416]	; (8000ca0 )
+ 8000b00:	430a      	orrs	r2, r1
+ 8000b02:	601a      	str	r2, [r3, #0]
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ 8000b04:	e041      	b.n	8000b8a 
+      }
+    }
+    else
+    {
+      /* Check the HSI State */
+      if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF)
+ 8000b06:	687b      	ldr	r3, [r7, #4]
+ 8000b08:	68db      	ldr	r3, [r3, #12]
+ 8000b0a:	2b00      	cmp	r3, #0
+ 8000b0c:	d024      	beq.n	8000b58 
+      {
+       /* Enable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_ENABLE();
+ 8000b0e:	4b64      	ldr	r3, [pc, #400]	; (8000ca0 )
+ 8000b10:	681a      	ldr	r2, [r3, #0]
+ 8000b12:	4b63      	ldr	r3, [pc, #396]	; (8000ca0 )
+ 8000b14:	2101      	movs	r1, #1
+ 8000b16:	430a      	orrs	r2, r1
+ 8000b18:	601a      	str	r2, [r3, #0]
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+ 8000b1a:	f7ff fcbb 	bl	8000494 
+ 8000b1e:	0003      	movs	r3, r0
+ 8000b20:	61bb      	str	r3, [r7, #24]
+        
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ 8000b22:	e008      	b.n	8000b36 
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ 8000b24:	f7ff fcb6 	bl	8000494 
+ 8000b28:	0002      	movs	r2, r0
+ 8000b2a:	69bb      	ldr	r3, [r7, #24]
+ 8000b2c:	1ad3      	subs	r3, r2, r3
+ 8000b2e:	2b02      	cmp	r3, #2
+ 8000b30:	d901      	bls.n	8000b36 
+          {
+            return HAL_TIMEOUT;
+ 8000b32:	2303      	movs	r3, #3
+ 8000b34:	e229      	b.n	8000f8a 
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ 8000b36:	4b5a      	ldr	r3, [pc, #360]	; (8000ca0 )
+ 8000b38:	681b      	ldr	r3, [r3, #0]
+ 8000b3a:	2202      	movs	r2, #2
+ 8000b3c:	4013      	ands	r3, r2
+ 8000b3e:	d0f1      	beq.n	8000b24 
+          }
+        }
+                
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ 8000b40:	4b57      	ldr	r3, [pc, #348]	; (8000ca0 )
+ 8000b42:	681b      	ldr	r3, [r3, #0]
+ 8000b44:	22f8      	movs	r2, #248	; 0xf8
+ 8000b46:	4393      	bics	r3, r2
+ 8000b48:	0019      	movs	r1, r3
+ 8000b4a:	687b      	ldr	r3, [r7, #4]
+ 8000b4c:	691b      	ldr	r3, [r3, #16]
+ 8000b4e:	00da      	lsls	r2, r3, #3
+ 8000b50:	4b53      	ldr	r3, [pc, #332]	; (8000ca0 )
+ 8000b52:	430a      	orrs	r2, r1
+ 8000b54:	601a      	str	r2, [r3, #0]
+ 8000b56:	e018      	b.n	8000b8a 
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_DISABLE();
+ 8000b58:	4b51      	ldr	r3, [pc, #324]	; (8000ca0 )
+ 8000b5a:	681a      	ldr	r2, [r3, #0]
+ 8000b5c:	4b50      	ldr	r3, [pc, #320]	; (8000ca0 )
+ 8000b5e:	2101      	movs	r1, #1
+ 8000b60:	438a      	bics	r2, r1
+ 8000b62:	601a      	str	r2, [r3, #0]
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+ 8000b64:	f7ff fc96 	bl	8000494 
+ 8000b68:	0003      	movs	r3, r0
+ 8000b6a:	61bb      	str	r3, [r7, #24]
+        
+        /* Wait till HSI is disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ 8000b6c:	e008      	b.n	8000b80 
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ 8000b6e:	f7ff fc91 	bl	8000494 
+ 8000b72:	0002      	movs	r2, r0
+ 8000b74:	69bb      	ldr	r3, [r7, #24]
+ 8000b76:	1ad3      	subs	r3, r2, r3
+ 8000b78:	2b02      	cmp	r3, #2
+ 8000b7a:	d901      	bls.n	8000b80 
+          {
+            return HAL_TIMEOUT;
+ 8000b7c:	2303      	movs	r3, #3
+ 8000b7e:	e204      	b.n	8000f8a 
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ 8000b80:	4b47      	ldr	r3, [pc, #284]	; (8000ca0 )
+ 8000b82:	681b      	ldr	r3, [r3, #0]
+ 8000b84:	2202      	movs	r2, #2
+ 8000b86:	4013      	ands	r3, r2
+ 8000b88:	d1f1      	bne.n	8000b6e 
+        }
+      }
+    }
+  }
+  /*------------------------------ LSI Configuration -------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ 8000b8a:	687b      	ldr	r3, [r7, #4]
+ 8000b8c:	681b      	ldr	r3, [r3, #0]
+ 8000b8e:	2208      	movs	r2, #8
+ 8000b90:	4013      	ands	r3, r2
+ 8000b92:	d036      	beq.n	8000c02 
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+    
+    /* Check the LSI State */
+    if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF)
+ 8000b94:	687b      	ldr	r3, [r7, #4]
+ 8000b96:	69db      	ldr	r3, [r3, #28]
+ 8000b98:	2b00      	cmp	r3, #0
+ 8000b9a:	d019      	beq.n	8000bd0 
+    {
+      /* Enable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_ENABLE();
+ 8000b9c:	4b40      	ldr	r3, [pc, #256]	; (8000ca0 )
+ 8000b9e:	6a5a      	ldr	r2, [r3, #36]	; 0x24
+ 8000ba0:	4b3f      	ldr	r3, [pc, #252]	; (8000ca0 )
+ 8000ba2:	2101      	movs	r1, #1
+ 8000ba4:	430a      	orrs	r2, r1
+ 8000ba6:	625a      	str	r2, [r3, #36]	; 0x24
+      
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+ 8000ba8:	f7ff fc74 	bl	8000494 
+ 8000bac:	0003      	movs	r3, r0
+ 8000bae:	61bb      	str	r3, [r7, #24]
+      
+      /* Wait till LSI is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ 8000bb0:	e008      	b.n	8000bc4 
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ 8000bb2:	f7ff fc6f 	bl	8000494 
+ 8000bb6:	0002      	movs	r2, r0
+ 8000bb8:	69bb      	ldr	r3, [r7, #24]
+ 8000bba:	1ad3      	subs	r3, r2, r3
+ 8000bbc:	2b02      	cmp	r3, #2
+ 8000bbe:	d901      	bls.n	8000bc4 
+        {
+          return HAL_TIMEOUT;
+ 8000bc0:	2303      	movs	r3, #3
+ 8000bc2:	e1e2      	b.n	8000f8a 
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ 8000bc4:	4b36      	ldr	r3, [pc, #216]	; (8000ca0 )
+ 8000bc6:	6a5b      	ldr	r3, [r3, #36]	; 0x24
+ 8000bc8:	2202      	movs	r2, #2
+ 8000bca:	4013      	ands	r3, r2
+ 8000bcc:	d0f1      	beq.n	8000bb2 
+ 8000bce:	e018      	b.n	8000c02 
+      }
+    }
+    else
+    {
+      /* Disable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_DISABLE();
+ 8000bd0:	4b33      	ldr	r3, [pc, #204]	; (8000ca0 )
+ 8000bd2:	6a5a      	ldr	r2, [r3, #36]	; 0x24
+ 8000bd4:	4b32      	ldr	r3, [pc, #200]	; (8000ca0 )
+ 8000bd6:	2101      	movs	r1, #1
+ 8000bd8:	438a      	bics	r2, r1
+ 8000bda:	625a      	str	r2, [r3, #36]	; 0x24
+      
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+ 8000bdc:	f7ff fc5a 	bl	8000494 
+ 8000be0:	0003      	movs	r3, r0
+ 8000be2:	61bb      	str	r3, [r7, #24]
+      
+      /* Wait till LSI is disabled */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ 8000be4:	e008      	b.n	8000bf8 
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ 8000be6:	f7ff fc55 	bl	8000494 
+ 8000bea:	0002      	movs	r2, r0
+ 8000bec:	69bb      	ldr	r3, [r7, #24]
+ 8000bee:	1ad3      	subs	r3, r2, r3
+ 8000bf0:	2b02      	cmp	r3, #2
+ 8000bf2:	d901      	bls.n	8000bf8 
+        {
+          return HAL_TIMEOUT;
+ 8000bf4:	2303      	movs	r3, #3
+ 8000bf6:	e1c8      	b.n	8000f8a 
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ 8000bf8:	4b29      	ldr	r3, [pc, #164]	; (8000ca0 )
+ 8000bfa:	6a5b      	ldr	r3, [r3, #36]	; 0x24
+ 8000bfc:	2202      	movs	r2, #2
+ 8000bfe:	4013      	ands	r3, r2
+ 8000c00:	d1f1      	bne.n	8000be6 
+        }
+      }
+    }
+  }
+  /*------------------------------ LSE Configuration -------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ 8000c02:	687b      	ldr	r3, [r7, #4]
+ 8000c04:	681b      	ldr	r3, [r3, #0]
+ 8000c06:	2204      	movs	r2, #4
+ 8000c08:	4013      	ands	r3, r2
+ 8000c0a:	d100      	bne.n	8000c0e 
+ 8000c0c:	e0b6      	b.n	8000d7c 
+  {
+    FlagStatus       pwrclkchanged = RESET;
+ 8000c0e:	231f      	movs	r3, #31
+ 8000c10:	18fb      	adds	r3, r7, r3
+ 8000c12:	2200      	movs	r2, #0
+ 8000c14:	701a      	strb	r2, [r3, #0]
+    /* Check the parameters */
+    assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+    /* Update LSE configuration in Backup Domain control register    */
+    /* Requires to enable write access to Backup Domain of necessary */
+    if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+ 8000c16:	4b22      	ldr	r3, [pc, #136]	; (8000ca0 )
+ 8000c18:	69da      	ldr	r2, [r3, #28]
+ 8000c1a:	2380      	movs	r3, #128	; 0x80
+ 8000c1c:	055b      	lsls	r3, r3, #21
+ 8000c1e:	4013      	ands	r3, r2
+ 8000c20:	d111      	bne.n	8000c46 
+    {
+      __HAL_RCC_PWR_CLK_ENABLE();
+ 8000c22:	4b1f      	ldr	r3, [pc, #124]	; (8000ca0 )
+ 8000c24:	69da      	ldr	r2, [r3, #28]
+ 8000c26:	4b1e      	ldr	r3, [pc, #120]	; (8000ca0 )
+ 8000c28:	2180      	movs	r1, #128	; 0x80
+ 8000c2a:	0549      	lsls	r1, r1, #21
+ 8000c2c:	430a      	orrs	r2, r1
+ 8000c2e:	61da      	str	r2, [r3, #28]
+ 8000c30:	4b1b      	ldr	r3, [pc, #108]	; (8000ca0 )
+ 8000c32:	69da      	ldr	r2, [r3, #28]
+ 8000c34:	2380      	movs	r3, #128	; 0x80
+ 8000c36:	055b      	lsls	r3, r3, #21
+ 8000c38:	4013      	ands	r3, r2
+ 8000c3a:	60fb      	str	r3, [r7, #12]
+ 8000c3c:	68fb      	ldr	r3, [r7, #12]
+      pwrclkchanged = SET;
+ 8000c3e:	231f      	movs	r3, #31
+ 8000c40:	18fb      	adds	r3, r7, r3
+ 8000c42:	2201      	movs	r2, #1
+ 8000c44:	701a      	strb	r2, [r3, #0]
+    }
+    
+    if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ 8000c46:	4b19      	ldr	r3, [pc, #100]	; (8000cac )
+ 8000c48:	681a      	ldr	r2, [r3, #0]
+ 8000c4a:	2380      	movs	r3, #128	; 0x80
+ 8000c4c:	005b      	lsls	r3, r3, #1
+ 8000c4e:	4013      	ands	r3, r2
+ 8000c50:	d11a      	bne.n	8000c88 
+    {
+      /* Enable write access to Backup domain */
+      SET_BIT(PWR->CR, PWR_CR_DBP);
+ 8000c52:	4b16      	ldr	r3, [pc, #88]	; (8000cac )
+ 8000c54:	681a      	ldr	r2, [r3, #0]
+ 8000c56:	4b15      	ldr	r3, [pc, #84]	; (8000cac )
+ 8000c58:	2180      	movs	r1, #128	; 0x80
+ 8000c5a:	0049      	lsls	r1, r1, #1
+ 8000c5c:	430a      	orrs	r2, r1
+ 8000c5e:	601a      	str	r2, [r3, #0]
+      
+      /* Wait for Backup domain Write protection disable */
+      tickstart = HAL_GetTick();
+ 8000c60:	f7ff fc18 	bl	8000494 
+ 8000c64:	0003      	movs	r3, r0
+ 8000c66:	61bb      	str	r3, [r7, #24]
+
+      while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ 8000c68:	e008      	b.n	8000c7c 
+      {
+        if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ 8000c6a:	f7ff fc13 	bl	8000494 
+ 8000c6e:	0002      	movs	r2, r0
+ 8000c70:	69bb      	ldr	r3, [r7, #24]
+ 8000c72:	1ad3      	subs	r3, r2, r3
+ 8000c74:	2b64      	cmp	r3, #100	; 0x64
+ 8000c76:	d901      	bls.n	8000c7c 
+        {
+          return HAL_TIMEOUT;
+ 8000c78:	2303      	movs	r3, #3
+ 8000c7a:	e186      	b.n	8000f8a 
+      while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ 8000c7c:	4b0b      	ldr	r3, [pc, #44]	; (8000cac )
+ 8000c7e:	681a      	ldr	r2, [r3, #0]
+ 8000c80:	2380      	movs	r3, #128	; 0x80
+ 8000c82:	005b      	lsls	r3, r3, #1
+ 8000c84:	4013      	ands	r3, r2
+ 8000c86:	d0f0      	beq.n	8000c6a 
+        }
+      }
+    }
+
+    /* Set the new LSE configuration -----------------------------------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ 8000c88:	687b      	ldr	r3, [r7, #4]
+ 8000c8a:	689b      	ldr	r3, [r3, #8]
+ 8000c8c:	2b01      	cmp	r3, #1
+ 8000c8e:	d10f      	bne.n	8000cb0 
+ 8000c90:	4b03      	ldr	r3, [pc, #12]	; (8000ca0 )
+ 8000c92:	6a1a      	ldr	r2, [r3, #32]
+ 8000c94:	4b02      	ldr	r3, [pc, #8]	; (8000ca0 )
+ 8000c96:	2101      	movs	r1, #1
+ 8000c98:	430a      	orrs	r2, r1
+ 8000c9a:	621a      	str	r2, [r3, #32]
+ 8000c9c:	e036      	b.n	8000d0c 
+ 8000c9e:	46c0      	nop			; (mov r8, r8)
+ 8000ca0:	40021000 	.word	0x40021000
+ 8000ca4:	fffeffff 	.word	0xfffeffff
+ 8000ca8:	fffbffff 	.word	0xfffbffff
+ 8000cac:	40007000 	.word	0x40007000
+ 8000cb0:	687b      	ldr	r3, [r7, #4]
+ 8000cb2:	689b      	ldr	r3, [r3, #8]
+ 8000cb4:	2b00      	cmp	r3, #0
+ 8000cb6:	d10c      	bne.n	8000cd2 
+ 8000cb8:	4bb6      	ldr	r3, [pc, #728]	; (8000f94 )
+ 8000cba:	6a1a      	ldr	r2, [r3, #32]
+ 8000cbc:	4bb5      	ldr	r3, [pc, #724]	; (8000f94 )
+ 8000cbe:	2101      	movs	r1, #1
+ 8000cc0:	438a      	bics	r2, r1
+ 8000cc2:	621a      	str	r2, [r3, #32]
+ 8000cc4:	4bb3      	ldr	r3, [pc, #716]	; (8000f94 )
+ 8000cc6:	6a1a      	ldr	r2, [r3, #32]
+ 8000cc8:	4bb2      	ldr	r3, [pc, #712]	; (8000f94 )
+ 8000cca:	2104      	movs	r1, #4
+ 8000ccc:	438a      	bics	r2, r1
+ 8000cce:	621a      	str	r2, [r3, #32]
+ 8000cd0:	e01c      	b.n	8000d0c 
+ 8000cd2:	687b      	ldr	r3, [r7, #4]
+ 8000cd4:	689b      	ldr	r3, [r3, #8]
+ 8000cd6:	2b05      	cmp	r3, #5
+ 8000cd8:	d10c      	bne.n	8000cf4 
+ 8000cda:	4bae      	ldr	r3, [pc, #696]	; (8000f94 )
+ 8000cdc:	6a1a      	ldr	r2, [r3, #32]
+ 8000cde:	4bad      	ldr	r3, [pc, #692]	; (8000f94 )
+ 8000ce0:	2104      	movs	r1, #4
+ 8000ce2:	430a      	orrs	r2, r1
+ 8000ce4:	621a      	str	r2, [r3, #32]
+ 8000ce6:	4bab      	ldr	r3, [pc, #684]	; (8000f94 )
+ 8000ce8:	6a1a      	ldr	r2, [r3, #32]
+ 8000cea:	4baa      	ldr	r3, [pc, #680]	; (8000f94 )
+ 8000cec:	2101      	movs	r1, #1
+ 8000cee:	430a      	orrs	r2, r1
+ 8000cf0:	621a      	str	r2, [r3, #32]
+ 8000cf2:	e00b      	b.n	8000d0c 
+ 8000cf4:	4ba7      	ldr	r3, [pc, #668]	; (8000f94 )
+ 8000cf6:	6a1a      	ldr	r2, [r3, #32]
+ 8000cf8:	4ba6      	ldr	r3, [pc, #664]	; (8000f94 )
+ 8000cfa:	2101      	movs	r1, #1
+ 8000cfc:	438a      	bics	r2, r1
+ 8000cfe:	621a      	str	r2, [r3, #32]
+ 8000d00:	4ba4      	ldr	r3, [pc, #656]	; (8000f94 )
+ 8000d02:	6a1a      	ldr	r2, [r3, #32]
+ 8000d04:	4ba3      	ldr	r3, [pc, #652]	; (8000f94 )
+ 8000d06:	2104      	movs	r1, #4
+ 8000d08:	438a      	bics	r2, r1
+ 8000d0a:	621a      	str	r2, [r3, #32]
+    /* Check the LSE State */
+    if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF)
+ 8000d0c:	687b      	ldr	r3, [r7, #4]
+ 8000d0e:	689b      	ldr	r3, [r3, #8]
+ 8000d10:	2b00      	cmp	r3, #0
+ 8000d12:	d014      	beq.n	8000d3e 
+    {
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+ 8000d14:	f7ff fbbe 	bl	8000494 
+ 8000d18:	0003      	movs	r3, r0
+ 8000d1a:	61bb      	str	r3, [r7, #24]
+      
+      /* Wait till LSE is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ 8000d1c:	e009      	b.n	8000d32 
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ 8000d1e:	f7ff fbb9 	bl	8000494 
+ 8000d22:	0002      	movs	r2, r0
+ 8000d24:	69bb      	ldr	r3, [r7, #24]
+ 8000d26:	1ad3      	subs	r3, r2, r3
+ 8000d28:	4a9b      	ldr	r2, [pc, #620]	; (8000f98 )
+ 8000d2a:	4293      	cmp	r3, r2
+ 8000d2c:	d901      	bls.n	8000d32 
+        {
+          return HAL_TIMEOUT;
+ 8000d2e:	2303      	movs	r3, #3
+ 8000d30:	e12b      	b.n	8000f8a 
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ 8000d32:	4b98      	ldr	r3, [pc, #608]	; (8000f94 )
+ 8000d34:	6a1b      	ldr	r3, [r3, #32]
+ 8000d36:	2202      	movs	r2, #2
+ 8000d38:	4013      	ands	r3, r2
+ 8000d3a:	d0f0      	beq.n	8000d1e 
+ 8000d3c:	e013      	b.n	8000d66 
+      }
+    }
+    else
+    {
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+ 8000d3e:	f7ff fba9 	bl	8000494 
+ 8000d42:	0003      	movs	r3, r0
+ 8000d44:	61bb      	str	r3, [r7, #24]
+      
+      /* Wait till LSE is disabled */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ 8000d46:	e009      	b.n	8000d5c 
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ 8000d48:	f7ff fba4 	bl	8000494 
+ 8000d4c:	0002      	movs	r2, r0
+ 8000d4e:	69bb      	ldr	r3, [r7, #24]
+ 8000d50:	1ad3      	subs	r3, r2, r3
+ 8000d52:	4a91      	ldr	r2, [pc, #580]	; (8000f98 )
+ 8000d54:	4293      	cmp	r3, r2
+ 8000d56:	d901      	bls.n	8000d5c 
+        {
+          return HAL_TIMEOUT;
+ 8000d58:	2303      	movs	r3, #3
+ 8000d5a:	e116      	b.n	8000f8a 
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ 8000d5c:	4b8d      	ldr	r3, [pc, #564]	; (8000f94 )
+ 8000d5e:	6a1b      	ldr	r3, [r3, #32]
+ 8000d60:	2202      	movs	r2, #2
+ 8000d62:	4013      	ands	r3, r2
+ 8000d64:	d1f0      	bne.n	8000d48 
+        }
+      }
+    }
+
+    /* Require to disable power clock if necessary */
+    if(pwrclkchanged == SET)
+ 8000d66:	231f      	movs	r3, #31
+ 8000d68:	18fb      	adds	r3, r7, r3
+ 8000d6a:	781b      	ldrb	r3, [r3, #0]
+ 8000d6c:	2b01      	cmp	r3, #1
+ 8000d6e:	d105      	bne.n	8000d7c 
+    {
+      __HAL_RCC_PWR_CLK_DISABLE();
+ 8000d70:	4b88      	ldr	r3, [pc, #544]	; (8000f94 )
+ 8000d72:	69da      	ldr	r2, [r3, #28]
+ 8000d74:	4b87      	ldr	r3, [pc, #540]	; (8000f94 )
+ 8000d76:	4989      	ldr	r1, [pc, #548]	; (8000f9c )
+ 8000d78:	400a      	ands	r2, r1
+ 8000d7a:	61da      	str	r2, [r3, #28]
+    }
+  }
+
+  /*----------------------------- HSI14 Configuration --------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14)
+ 8000d7c:	687b      	ldr	r3, [r7, #4]
+ 8000d7e:	681b      	ldr	r3, [r3, #0]
+ 8000d80:	2210      	movs	r2, #16
+ 8000d82:	4013      	ands	r3, r2
+ 8000d84:	d063      	beq.n	8000e4e 
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue));
+
+    /* Check the HSI14 State */
+    if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON)
+ 8000d86:	687b      	ldr	r3, [r7, #4]
+ 8000d88:	695b      	ldr	r3, [r3, #20]
+ 8000d8a:	2b01      	cmp	r3, #1
+ 8000d8c:	d12a      	bne.n	8000de4 
+    {
+      /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+      __HAL_RCC_HSI14ADC_DISABLE();
+ 8000d8e:	4b81      	ldr	r3, [pc, #516]	; (8000f94 )
+ 8000d90:	6b5a      	ldr	r2, [r3, #52]	; 0x34
+ 8000d92:	4b80      	ldr	r3, [pc, #512]	; (8000f94 )
+ 8000d94:	2104      	movs	r1, #4
+ 8000d96:	430a      	orrs	r2, r1
+ 8000d98:	635a      	str	r2, [r3, #52]	; 0x34
+
+      /* Enable the Internal High Speed oscillator (HSI). */
+      __HAL_RCC_HSI14_ENABLE();
+ 8000d9a:	4b7e      	ldr	r3, [pc, #504]	; (8000f94 )
+ 8000d9c:	6b5a      	ldr	r2, [r3, #52]	; 0x34
+ 8000d9e:	4b7d      	ldr	r3, [pc, #500]	; (8000f94 )
+ 8000da0:	2101      	movs	r1, #1
+ 8000da2:	430a      	orrs	r2, r1
+ 8000da4:	635a      	str	r2, [r3, #52]	; 0x34
+
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+ 8000da6:	f7ff fb75 	bl	8000494 
+ 8000daa:	0003      	movs	r3, r0
+ 8000dac:	61bb      	str	r3, [r7, #24]
+      
+      /* Wait till HSI is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET)
+ 8000dae:	e008      	b.n	8000dc2 
+      {
+        if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+ 8000db0:	f7ff fb70 	bl	8000494 
+ 8000db4:	0002      	movs	r2, r0
+ 8000db6:	69bb      	ldr	r3, [r7, #24]
+ 8000db8:	1ad3      	subs	r3, r2, r3
+ 8000dba:	2b02      	cmp	r3, #2
+ 8000dbc:	d901      	bls.n	8000dc2 
+        {
+          return HAL_TIMEOUT;
+ 8000dbe:	2303      	movs	r3, #3
+ 8000dc0:	e0e3      	b.n	8000f8a 
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET)
+ 8000dc2:	4b74      	ldr	r3, [pc, #464]	; (8000f94 )
+ 8000dc4:	6b5b      	ldr	r3, [r3, #52]	; 0x34
+ 8000dc6:	2202      	movs	r2, #2
+ 8000dc8:	4013      	ands	r3, r2
+ 8000dca:	d0f1      	beq.n	8000db0 
+        }      
+      } 
+
+      /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+      __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+ 8000dcc:	4b71      	ldr	r3, [pc, #452]	; (8000f94 )
+ 8000dce:	6b5b      	ldr	r3, [r3, #52]	; 0x34
+ 8000dd0:	22f8      	movs	r2, #248	; 0xf8
+ 8000dd2:	4393      	bics	r3, r2
+ 8000dd4:	0019      	movs	r1, r3
+ 8000dd6:	687b      	ldr	r3, [r7, #4]
+ 8000dd8:	699b      	ldr	r3, [r3, #24]
+ 8000dda:	00da      	lsls	r2, r3, #3
+ 8000ddc:	4b6d      	ldr	r3, [pc, #436]	; (8000f94 )
+ 8000dde:	430a      	orrs	r2, r1
+ 8000de0:	635a      	str	r2, [r3, #52]	; 0x34
+ 8000de2:	e034      	b.n	8000e4e 
+    }
+    else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL)
+ 8000de4:	687b      	ldr	r3, [r7, #4]
+ 8000de6:	695b      	ldr	r3, [r3, #20]
+ 8000de8:	3305      	adds	r3, #5
+ 8000dea:	d111      	bne.n	8000e10 
+    {
+      /* Enable ADC control of the Internal High Speed oscillator HSI14 */
+      __HAL_RCC_HSI14ADC_ENABLE();
+ 8000dec:	4b69      	ldr	r3, [pc, #420]	; (8000f94 )
+ 8000dee:	6b5a      	ldr	r2, [r3, #52]	; 0x34
+ 8000df0:	4b68      	ldr	r3, [pc, #416]	; (8000f94 )
+ 8000df2:	2104      	movs	r1, #4
+ 8000df4:	438a      	bics	r2, r1
+ 8000df6:	635a      	str	r2, [r3, #52]	; 0x34
+
+      /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+      __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+ 8000df8:	4b66      	ldr	r3, [pc, #408]	; (8000f94 )
+ 8000dfa:	6b5b      	ldr	r3, [r3, #52]	; 0x34
+ 8000dfc:	22f8      	movs	r2, #248	; 0xf8
+ 8000dfe:	4393      	bics	r3, r2
+ 8000e00:	0019      	movs	r1, r3
+ 8000e02:	687b      	ldr	r3, [r7, #4]
+ 8000e04:	699b      	ldr	r3, [r3, #24]
+ 8000e06:	00da      	lsls	r2, r3, #3
+ 8000e08:	4b62      	ldr	r3, [pc, #392]	; (8000f94 )
+ 8000e0a:	430a      	orrs	r2, r1
+ 8000e0c:	635a      	str	r2, [r3, #52]	; 0x34
+ 8000e0e:	e01e      	b.n	8000e4e 
+    }
+    else
+    {
+      /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+      __HAL_RCC_HSI14ADC_DISABLE();
+ 8000e10:	4b60      	ldr	r3, [pc, #384]	; (8000f94 )
+ 8000e12:	6b5a      	ldr	r2, [r3, #52]	; 0x34
+ 8000e14:	4b5f      	ldr	r3, [pc, #380]	; (8000f94 )
+ 8000e16:	2104      	movs	r1, #4
+ 8000e18:	430a      	orrs	r2, r1
+ 8000e1a:	635a      	str	r2, [r3, #52]	; 0x34
+
+      /* Disable the Internal High Speed oscillator (HSI). */
+      __HAL_RCC_HSI14_DISABLE();
+ 8000e1c:	4b5d      	ldr	r3, [pc, #372]	; (8000f94 )
+ 8000e1e:	6b5a      	ldr	r2, [r3, #52]	; 0x34
+ 8000e20:	4b5c      	ldr	r3, [pc, #368]	; (8000f94 )
+ 8000e22:	2101      	movs	r1, #1
+ 8000e24:	438a      	bics	r2, r1
+ 8000e26:	635a      	str	r2, [r3, #52]	; 0x34
+
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+ 8000e28:	f7ff fb34 	bl	8000494 
+ 8000e2c:	0003      	movs	r3, r0
+ 8000e2e:	61bb      	str	r3, [r7, #24]
+      
+      /* Wait till HSI is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET)
+ 8000e30:	e008      	b.n	8000e44 
+      {
+        if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+ 8000e32:	f7ff fb2f 	bl	8000494 
+ 8000e36:	0002      	movs	r2, r0
+ 8000e38:	69bb      	ldr	r3, [r7, #24]
+ 8000e3a:	1ad3      	subs	r3, r2, r3
+ 8000e3c:	2b02      	cmp	r3, #2
+ 8000e3e:	d901      	bls.n	8000e44 
+        {
+          return HAL_TIMEOUT;
+ 8000e40:	2303      	movs	r3, #3
+ 8000e42:	e0a2      	b.n	8000f8a 
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET)
+ 8000e44:	4b53      	ldr	r3, [pc, #332]	; (8000f94 )
+ 8000e46:	6b5b      	ldr	r3, [r3, #52]	; 0x34
+ 8000e48:	2202      	movs	r2, #2
+ 8000e4a:	4013      	ands	r3, r2
+ 8000e4c:	d1f1      	bne.n	8000e32 
+#endif /* RCC_HSI48_SUPPORT */
+       
+  /*-------------------------------- PLL Configuration -----------------------*/
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+  if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ 8000e4e:	687b      	ldr	r3, [r7, #4]
+ 8000e50:	6a1b      	ldr	r3, [r3, #32]
+ 8000e52:	2b00      	cmp	r3, #0
+ 8000e54:	d100      	bne.n	8000e58 
+ 8000e56:	e097      	b.n	8000f88 
+  {
+    /* Check if the PLL is used as system clock or not */
+    if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ 8000e58:	4b4e      	ldr	r3, [pc, #312]	; (8000f94 )
+ 8000e5a:	685b      	ldr	r3, [r3, #4]
+ 8000e5c:	220c      	movs	r2, #12
+ 8000e5e:	4013      	ands	r3, r2
+ 8000e60:	2b08      	cmp	r3, #8
+ 8000e62:	d100      	bne.n	8000e66 
+ 8000e64:	e06b      	b.n	8000f3e 
+    { 
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ 8000e66:	687b      	ldr	r3, [r7, #4]
+ 8000e68:	6a1b      	ldr	r3, [r3, #32]
+ 8000e6a:	2b02      	cmp	r3, #2
+ 8000e6c:	d14c      	bne.n	8000f08 
+        assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+        assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL));
+        assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV));
+  
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+ 8000e6e:	4b49      	ldr	r3, [pc, #292]	; (8000f94 )
+ 8000e70:	681a      	ldr	r2, [r3, #0]
+ 8000e72:	4b48      	ldr	r3, [pc, #288]	; (8000f94 )
+ 8000e74:	494a      	ldr	r1, [pc, #296]	; (8000fa0 )
+ 8000e76:	400a      	ands	r2, r1
+ 8000e78:	601a      	str	r2, [r3, #0]
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+ 8000e7a:	f7ff fb0b 	bl	8000494 
+ 8000e7e:	0003      	movs	r3, r0
+ 8000e80:	61bb      	str	r3, [r7, #24]
+        
+        /* Wait till PLL is disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  != RESET)
+ 8000e82:	e008      	b.n	8000e96 
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ 8000e84:	f7ff fb06 	bl	8000494 
+ 8000e88:	0002      	movs	r2, r0
+ 8000e8a:	69bb      	ldr	r3, [r7, #24]
+ 8000e8c:	1ad3      	subs	r3, r2, r3
+ 8000e8e:	2b02      	cmp	r3, #2
+ 8000e90:	d901      	bls.n	8000e96 
+          {
+            return HAL_TIMEOUT;
+ 8000e92:	2303      	movs	r3, #3
+ 8000e94:	e079      	b.n	8000f8a 
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  != RESET)
+ 8000e96:	4b3f      	ldr	r3, [pc, #252]	; (8000f94 )
+ 8000e98:	681a      	ldr	r2, [r3, #0]
+ 8000e9a:	2380      	movs	r3, #128	; 0x80
+ 8000e9c:	049b      	lsls	r3, r3, #18
+ 8000e9e:	4013      	ands	r3, r2
+ 8000ea0:	d1f0      	bne.n	8000e84 
+          }
+        }
+
+        /* Configure the main PLL clock source, predivider and multiplication factor. */
+        __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ 8000ea2:	4b3c      	ldr	r3, [pc, #240]	; (8000f94 )
+ 8000ea4:	6adb      	ldr	r3, [r3, #44]	; 0x2c
+ 8000ea6:	220f      	movs	r2, #15
+ 8000ea8:	4393      	bics	r3, r2
+ 8000eaa:	0019      	movs	r1, r3
+ 8000eac:	687b      	ldr	r3, [r7, #4]
+ 8000eae:	6ada      	ldr	r2, [r3, #44]	; 0x2c
+ 8000eb0:	4b38      	ldr	r3, [pc, #224]	; (8000f94 )
+ 8000eb2:	430a      	orrs	r2, r1
+ 8000eb4:	62da      	str	r2, [r3, #44]	; 0x2c
+ 8000eb6:	4b37      	ldr	r3, [pc, #220]	; (8000f94 )
+ 8000eb8:	685b      	ldr	r3, [r3, #4]
+ 8000eba:	4a3a      	ldr	r2, [pc, #232]	; (8000fa4 )
+ 8000ebc:	4013      	ands	r3, r2
+ 8000ebe:	0019      	movs	r1, r3
+ 8000ec0:	687b      	ldr	r3, [r7, #4]
+ 8000ec2:	6a9a      	ldr	r2, [r3, #40]	; 0x28
+ 8000ec4:	687b      	ldr	r3, [r7, #4]
+ 8000ec6:	6a5b      	ldr	r3, [r3, #36]	; 0x24
+ 8000ec8:	431a      	orrs	r2, r3
+ 8000eca:	4b32      	ldr	r3, [pc, #200]	; (8000f94 )
+ 8000ecc:	430a      	orrs	r2, r1
+ 8000ece:	605a      	str	r2, [r3, #4]
+                             RCC_OscInitStruct->PLL.PREDIV,
+                             RCC_OscInitStruct->PLL.PLLMUL);
+        /* Enable the main PLL. */
+        __HAL_RCC_PLL_ENABLE();
+ 8000ed0:	4b30      	ldr	r3, [pc, #192]	; (8000f94 )
+ 8000ed2:	681a      	ldr	r2, [r3, #0]
+ 8000ed4:	4b2f      	ldr	r3, [pc, #188]	; (8000f94 )
+ 8000ed6:	2180      	movs	r1, #128	; 0x80
+ 8000ed8:	0449      	lsls	r1, r1, #17
+ 8000eda:	430a      	orrs	r2, r1
+ 8000edc:	601a      	str	r2, [r3, #0]
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+ 8000ede:	f7ff fad9 	bl	8000494 
+ 8000ee2:	0003      	movs	r3, r0
+ 8000ee4:	61bb      	str	r3, [r7, #24]
+        
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  == RESET)
+ 8000ee6:	e008      	b.n	8000efa 
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ 8000ee8:	f7ff fad4 	bl	8000494 
+ 8000eec:	0002      	movs	r2, r0
+ 8000eee:	69bb      	ldr	r3, [r7, #24]
+ 8000ef0:	1ad3      	subs	r3, r2, r3
+ 8000ef2:	2b02      	cmp	r3, #2
+ 8000ef4:	d901      	bls.n	8000efa 
+          {
+            return HAL_TIMEOUT;
+ 8000ef6:	2303      	movs	r3, #3
+ 8000ef8:	e047      	b.n	8000f8a 
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  == RESET)
+ 8000efa:	4b26      	ldr	r3, [pc, #152]	; (8000f94 )
+ 8000efc:	681a      	ldr	r2, [r3, #0]
+ 8000efe:	2380      	movs	r3, #128	; 0x80
+ 8000f00:	049b      	lsls	r3, r3, #18
+ 8000f02:	4013      	ands	r3, r2
+ 8000f04:	d0f0      	beq.n	8000ee8 
+ 8000f06:	e03f      	b.n	8000f88 
+        }
+      }
+      else
+      {
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+ 8000f08:	4b22      	ldr	r3, [pc, #136]	; (8000f94 )
+ 8000f0a:	681a      	ldr	r2, [r3, #0]
+ 8000f0c:	4b21      	ldr	r3, [pc, #132]	; (8000f94 )
+ 8000f0e:	4924      	ldr	r1, [pc, #144]	; (8000fa0 )
+ 8000f10:	400a      	ands	r2, r1
+ 8000f12:	601a      	str	r2, [r3, #0]
+ 
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+ 8000f14:	f7ff fabe 	bl	8000494 
+ 8000f18:	0003      	movs	r3, r0
+ 8000f1a:	61bb      	str	r3, [r7, #24]
+        
+        /* Wait till PLL is disabled */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  != RESET)
+ 8000f1c:	e008      	b.n	8000f30 
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ 8000f1e:	f7ff fab9 	bl	8000494 
+ 8000f22:	0002      	movs	r2, r0
+ 8000f24:	69bb      	ldr	r3, [r7, #24]
+ 8000f26:	1ad3      	subs	r3, r2, r3
+ 8000f28:	2b02      	cmp	r3, #2
+ 8000f2a:	d901      	bls.n	8000f30 
+          {
+            return HAL_TIMEOUT;
+ 8000f2c:	2303      	movs	r3, #3
+ 8000f2e:	e02c      	b.n	8000f8a 
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  != RESET)
+ 8000f30:	4b18      	ldr	r3, [pc, #96]	; (8000f94 )
+ 8000f32:	681a      	ldr	r2, [r3, #0]
+ 8000f34:	2380      	movs	r3, #128	; 0x80
+ 8000f36:	049b      	lsls	r3, r3, #18
+ 8000f38:	4013      	ands	r3, r2
+ 8000f3a:	d1f0      	bne.n	8000f1e 
+ 8000f3c:	e024      	b.n	8000f88 
+      }
+    }
+    else
+    {
+      /* Check if there is a request to disable the PLL used as System clock source */
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF)
+ 8000f3e:	687b      	ldr	r3, [r7, #4]
+ 8000f40:	6a1b      	ldr	r3, [r3, #32]
+ 8000f42:	2b01      	cmp	r3, #1
+ 8000f44:	d101      	bne.n	8000f4a 
+      {
+        return HAL_ERROR;
+ 8000f46:	2301      	movs	r3, #1
+ 8000f48:	e01f      	b.n	8000f8a 
+      }
+      else
+      {
+        /* Do not return HAL_ERROR if request repeats the current configuration */
+        pll_config  = RCC->CFGR;
+ 8000f4a:	4b12      	ldr	r3, [pc, #72]	; (8000f94 )
+ 8000f4c:	685b      	ldr	r3, [r3, #4]
+ 8000f4e:	617b      	str	r3, [r7, #20]
+        pll_config2 = RCC->CFGR2;
+ 8000f50:	4b10      	ldr	r3, [pc, #64]	; (8000f94 )
+ 8000f52:	6adb      	ldr	r3, [r3, #44]	; 0x2c
+ 8000f54:	613b      	str	r3, [r7, #16]
+        if((READ_BIT(pll_config,  RCC_CFGR_PLLSRC)  != RCC_OscInitStruct->PLL.PLLSource) ||
+ 8000f56:	697a      	ldr	r2, [r7, #20]
+ 8000f58:	2380      	movs	r3, #128	; 0x80
+ 8000f5a:	025b      	lsls	r3, r3, #9
+ 8000f5c:	401a      	ands	r2, r3
+ 8000f5e:	687b      	ldr	r3, [r7, #4]
+ 8000f60:	6a5b      	ldr	r3, [r3, #36]	; 0x24
+ 8000f62:	429a      	cmp	r2, r3
+ 8000f64:	d10e      	bne.n	8000f84 
+           (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV)    ||
+ 8000f66:	693b      	ldr	r3, [r7, #16]
+ 8000f68:	220f      	movs	r2, #15
+ 8000f6a:	401a      	ands	r2, r3
+ 8000f6c:	687b      	ldr	r3, [r7, #4]
+ 8000f6e:	6adb      	ldr	r3, [r3, #44]	; 0x2c
+        if((READ_BIT(pll_config,  RCC_CFGR_PLLSRC)  != RCC_OscInitStruct->PLL.PLLSource) ||
+ 8000f70:	429a      	cmp	r2, r3
+ 8000f72:	d107      	bne.n	8000f84 
+           (READ_BIT(pll_config,  RCC_CFGR_PLLMUL)  != RCC_OscInitStruct->PLL.PLLMUL))
+ 8000f74:	697a      	ldr	r2, [r7, #20]
+ 8000f76:	23f0      	movs	r3, #240	; 0xf0
+ 8000f78:	039b      	lsls	r3, r3, #14
+ 8000f7a:	401a      	ands	r2, r3
+ 8000f7c:	687b      	ldr	r3, [r7, #4]
+ 8000f7e:	6a9b      	ldr	r3, [r3, #40]	; 0x28
+           (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV)    ||
+ 8000f80:	429a      	cmp	r2, r3
+ 8000f82:	d001      	beq.n	8000f88 
+        {
+          return HAL_ERROR;
+ 8000f84:	2301      	movs	r3, #1
+ 8000f86:	e000      	b.n	8000f8a 
+        }
+      }
+    }
+  }
+
+  return HAL_OK;
+ 8000f88:	2300      	movs	r3, #0
+}
+ 8000f8a:	0018      	movs	r0, r3
+ 8000f8c:	46bd      	mov	sp, r7
+ 8000f8e:	b008      	add	sp, #32
+ 8000f90:	bd80      	pop	{r7, pc}
+ 8000f92:	46c0      	nop			; (mov r8, r8)
+ 8000f94:	40021000 	.word	0x40021000
+ 8000f98:	00001388 	.word	0x00001388
+ 8000f9c:	efffffff 	.word	0xefffffff
+ 8000fa0:	feffffff 	.word	0xfeffffff
+ 8000fa4:	ffc2ffff 	.word	0xffc2ffff
+
+08000fa8 :
+  *         You can use @ref HAL_RCC_GetClockConfig() function to know which clock is
+  *         currently used as system clock source.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ 8000fa8:	b580      	push	{r7, lr}
+ 8000faa:	b084      	sub	sp, #16
+ 8000fac:	af00      	add	r7, sp, #0
+ 8000fae:	6078      	str	r0, [r7, #4]
+ 8000fb0:	6039      	str	r1, [r7, #0]
+  uint32_t tickstart;
+
+  /* Check Null pointer */
+  if(RCC_ClkInitStruct == NULL)
+ 8000fb2:	687b      	ldr	r3, [r7, #4]
+ 8000fb4:	2b00      	cmp	r3, #0
+ 8000fb6:	d101      	bne.n	8000fbc 
+  {
+    return HAL_ERROR;
+ 8000fb8:	2301      	movs	r3, #1
+ 8000fba:	e0b3      	b.n	8001124 
+  /* To correctly read data from FLASH memory, the number of wait states (LATENCY) 
+  must be correctly programmed according to the frequency of the CPU clock 
+    (HCLK) of the device. */
+
+  /* Increasing the number of wait states because of higher CPU frequency */
+  if(FLatency > __HAL_FLASH_GET_LATENCY())
+ 8000fbc:	4b5b      	ldr	r3, [pc, #364]	; (800112c )
+ 8000fbe:	681b      	ldr	r3, [r3, #0]
+ 8000fc0:	2201      	movs	r2, #1
+ 8000fc2:	4013      	ands	r3, r2
+ 8000fc4:	683a      	ldr	r2, [r7, #0]
+ 8000fc6:	429a      	cmp	r2, r3
+ 8000fc8:	d911      	bls.n	8000fee 
+  {    
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+ 8000fca:	4b58      	ldr	r3, [pc, #352]	; (800112c )
+ 8000fcc:	681b      	ldr	r3, [r3, #0]
+ 8000fce:	2201      	movs	r2, #1
+ 8000fd0:	4393      	bics	r3, r2
+ 8000fd2:	0019      	movs	r1, r3
+ 8000fd4:	4b55      	ldr	r3, [pc, #340]	; (800112c )
+ 8000fd6:	683a      	ldr	r2, [r7, #0]
+ 8000fd8:	430a      	orrs	r2, r1
+ 8000fda:	601a      	str	r2, [r3, #0]
+    
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if(__HAL_FLASH_GET_LATENCY() != FLatency)
+ 8000fdc:	4b53      	ldr	r3, [pc, #332]	; (800112c )
+ 8000fde:	681b      	ldr	r3, [r3, #0]
+ 8000fe0:	2201      	movs	r2, #1
+ 8000fe2:	4013      	ands	r3, r2
+ 8000fe4:	683a      	ldr	r2, [r7, #0]
+ 8000fe6:	429a      	cmp	r2, r3
+ 8000fe8:	d001      	beq.n	8000fee 
+    {
+      return HAL_ERROR;
+ 8000fea:	2301      	movs	r3, #1
+ 8000fec:	e09a      	b.n	8001124 
+    }
+  }
+
+  /*-------------------------- HCLK Configuration --------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ 8000fee:	687b      	ldr	r3, [r7, #4]
+ 8000ff0:	681b      	ldr	r3, [r3, #0]
+ 8000ff2:	2202      	movs	r2, #2
+ 8000ff4:	4013      	ands	r3, r2
+ 8000ff6:	d015      	beq.n	8001024 
+  {
+    /* Set the highest APB divider in order to ensure that we do not go through
+       a non-spec phase whatever we decrease or increase HCLK. */
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ 8000ff8:	687b      	ldr	r3, [r7, #4]
+ 8000ffa:	681b      	ldr	r3, [r3, #0]
+ 8000ffc:	2204      	movs	r2, #4
+ 8000ffe:	4013      	ands	r3, r2
+ 8001000:	d006      	beq.n	8001010 
+    {
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16);
+ 8001002:	4b4b      	ldr	r3, [pc, #300]	; (8001130 )
+ 8001004:	685a      	ldr	r2, [r3, #4]
+ 8001006:	4b4a      	ldr	r3, [pc, #296]	; (8001130 )
+ 8001008:	21e0      	movs	r1, #224	; 0xe0
+ 800100a:	00c9      	lsls	r1, r1, #3
+ 800100c:	430a      	orrs	r2, r1
+ 800100e:	605a      	str	r2, [r3, #4]
+    }
+
+    /* Set the new HCLK clock divider */
+    assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ 8001010:	4b47      	ldr	r3, [pc, #284]	; (8001130 )
+ 8001012:	685b      	ldr	r3, [r3, #4]
+ 8001014:	22f0      	movs	r2, #240	; 0xf0
+ 8001016:	4393      	bics	r3, r2
+ 8001018:	0019      	movs	r1, r3
+ 800101a:	687b      	ldr	r3, [r7, #4]
+ 800101c:	689a      	ldr	r2, [r3, #8]
+ 800101e:	4b44      	ldr	r3, [pc, #272]	; (8001130 )
+ 8001020:	430a      	orrs	r2, r1
+ 8001022:	605a      	str	r2, [r3, #4]
+  }
+
+  /*------------------------- SYSCLK Configuration ---------------------------*/ 
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ 8001024:	687b      	ldr	r3, [r7, #4]
+ 8001026:	681b      	ldr	r3, [r3, #0]
+ 8001028:	2201      	movs	r2, #1
+ 800102a:	4013      	ands	r3, r2
+ 800102c:	d040      	beq.n	80010b0 
+  {
+    assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+    
+    /* HSE is selected as System Clock Source */
+    if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ 800102e:	687b      	ldr	r3, [r7, #4]
+ 8001030:	685b      	ldr	r3, [r3, #4]
+ 8001032:	2b01      	cmp	r3, #1
+ 8001034:	d107      	bne.n	8001046 
+    {
+      /* Check the HSE ready flag */  
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ 8001036:	4b3e      	ldr	r3, [pc, #248]	; (8001130 )
+ 8001038:	681a      	ldr	r2, [r3, #0]
+ 800103a:	2380      	movs	r3, #128	; 0x80
+ 800103c:	029b      	lsls	r3, r3, #10
+ 800103e:	4013      	ands	r3, r2
+ 8001040:	d114      	bne.n	800106c 
+      {
+        return HAL_ERROR;
+ 8001042:	2301      	movs	r3, #1
+ 8001044:	e06e      	b.n	8001124 
+      }
+    }
+    /* PLL is selected as System Clock Source */
+    else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ 8001046:	687b      	ldr	r3, [r7, #4]
+ 8001048:	685b      	ldr	r3, [r3, #4]
+ 800104a:	2b02      	cmp	r3, #2
+ 800104c:	d107      	bne.n	800105e 
+    {
+      /* Check the PLL ready flag */  
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ 800104e:	4b38      	ldr	r3, [pc, #224]	; (8001130 )
+ 8001050:	681a      	ldr	r2, [r3, #0]
+ 8001052:	2380      	movs	r3, #128	; 0x80
+ 8001054:	049b      	lsls	r3, r3, #18
+ 8001056:	4013      	ands	r3, r2
+ 8001058:	d108      	bne.n	800106c 
+      {
+        return HAL_ERROR;
+ 800105a:	2301      	movs	r3, #1
+ 800105c:	e062      	b.n	8001124 
+#endif /* RCC_CFGR_SWS_HSI48 */
+    /* HSI is selected as System Clock Source */
+    else
+    {
+      /* Check the HSI ready flag */  
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ 800105e:	4b34      	ldr	r3, [pc, #208]	; (8001130 )
+ 8001060:	681b      	ldr	r3, [r3, #0]
+ 8001062:	2202      	movs	r2, #2
+ 8001064:	4013      	ands	r3, r2
+ 8001066:	d101      	bne.n	800106c 
+      {
+        return HAL_ERROR;
+ 8001068:	2301      	movs	r3, #1
+ 800106a:	e05b      	b.n	8001124 
+      }
+    }
+    __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+ 800106c:	4b30      	ldr	r3, [pc, #192]	; (8001130 )
+ 800106e:	685b      	ldr	r3, [r3, #4]
+ 8001070:	2203      	movs	r2, #3
+ 8001072:	4393      	bics	r3, r2
+ 8001074:	0019      	movs	r1, r3
+ 8001076:	687b      	ldr	r3, [r7, #4]
+ 8001078:	685a      	ldr	r2, [r3, #4]
+ 800107a:	4b2d      	ldr	r3, [pc, #180]	; (8001130 )
+ 800107c:	430a      	orrs	r2, r1
+ 800107e:	605a      	str	r2, [r3, #4]
+
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+ 8001080:	f7ff fa08 	bl	8000494 
+ 8001084:	0003      	movs	r3, r0
+ 8001086:	60fb      	str	r3, [r7, #12]
+    
+    while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos))
+ 8001088:	e009      	b.n	800109e 
+    {
+      if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ 800108a:	f7ff fa03 	bl	8000494 
+ 800108e:	0002      	movs	r2, r0
+ 8001090:	68fb      	ldr	r3, [r7, #12]
+ 8001092:	1ad3      	subs	r3, r2, r3
+ 8001094:	4a27      	ldr	r2, [pc, #156]	; (8001134 )
+ 8001096:	4293      	cmp	r3, r2
+ 8001098:	d901      	bls.n	800109e 
+      {
+        return HAL_TIMEOUT;
+ 800109a:	2303      	movs	r3, #3
+ 800109c:	e042      	b.n	8001124 
+    while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos))
+ 800109e:	4b24      	ldr	r3, [pc, #144]	; (8001130 )
+ 80010a0:	685b      	ldr	r3, [r3, #4]
+ 80010a2:	220c      	movs	r2, #12
+ 80010a4:	401a      	ands	r2, r3
+ 80010a6:	687b      	ldr	r3, [r7, #4]
+ 80010a8:	685b      	ldr	r3, [r3, #4]
+ 80010aa:	009b      	lsls	r3, r3, #2
+ 80010ac:	429a      	cmp	r2, r3
+ 80010ae:	d1ec      	bne.n	800108a 
+      }
+    }
+  }
+
+  /* Decreasing the number of wait states because of lower CPU frequency */
+  if(FLatency < __HAL_FLASH_GET_LATENCY())
+ 80010b0:	4b1e      	ldr	r3, [pc, #120]	; (800112c )
+ 80010b2:	681b      	ldr	r3, [r3, #0]
+ 80010b4:	2201      	movs	r2, #1
+ 80010b6:	4013      	ands	r3, r2
+ 80010b8:	683a      	ldr	r2, [r7, #0]
+ 80010ba:	429a      	cmp	r2, r3
+ 80010bc:	d211      	bcs.n	80010e2 
+  {    
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+ 80010be:	4b1b      	ldr	r3, [pc, #108]	; (800112c )
+ 80010c0:	681b      	ldr	r3, [r3, #0]
+ 80010c2:	2201      	movs	r2, #1
+ 80010c4:	4393      	bics	r3, r2
+ 80010c6:	0019      	movs	r1, r3
+ 80010c8:	4b18      	ldr	r3, [pc, #96]	; (800112c )
+ 80010ca:	683a      	ldr	r2, [r7, #0]
+ 80010cc:	430a      	orrs	r2, r1
+ 80010ce:	601a      	str	r2, [r3, #0]
+    
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if(__HAL_FLASH_GET_LATENCY() != FLatency)
+ 80010d0:	4b16      	ldr	r3, [pc, #88]	; (800112c )
+ 80010d2:	681b      	ldr	r3, [r3, #0]
+ 80010d4:	2201      	movs	r2, #1
+ 80010d6:	4013      	ands	r3, r2
+ 80010d8:	683a      	ldr	r2, [r7, #0]
+ 80010da:	429a      	cmp	r2, r3
+ 80010dc:	d001      	beq.n	80010e2 
+    {
+      return HAL_ERROR;
+ 80010de:	2301      	movs	r3, #1
+ 80010e0:	e020      	b.n	8001124 
+    }
+  }    
+
+  /*-------------------------- PCLK1 Configuration ---------------------------*/ 
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ 80010e2:	687b      	ldr	r3, [r7, #4]
+ 80010e4:	681b      	ldr	r3, [r3, #0]
+ 80010e6:	2204      	movs	r2, #4
+ 80010e8:	4013      	ands	r3, r2
+ 80010ea:	d009      	beq.n	8001100 
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider);
+ 80010ec:	4b10      	ldr	r3, [pc, #64]	; (8001130 )
+ 80010ee:	685b      	ldr	r3, [r3, #4]
+ 80010f0:	4a11      	ldr	r2, [pc, #68]	; (8001138 )
+ 80010f2:	4013      	ands	r3, r2
+ 80010f4:	0019      	movs	r1, r3
+ 80010f6:	687b      	ldr	r3, [r7, #4]
+ 80010f8:	68da      	ldr	r2, [r3, #12]
+ 80010fa:	4b0d      	ldr	r3, [pc, #52]	; (8001130 )
+ 80010fc:	430a      	orrs	r2, r1
+ 80010fe:	605a      	str	r2, [r3, #4]
+  }
+  
+  /* Update the SystemCoreClock global variable */
+  SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
+ 8001100:	f000 f820 	bl	8001144 
+ 8001104:	0001      	movs	r1, r0
+ 8001106:	4b0a      	ldr	r3, [pc, #40]	; (8001130 )
+ 8001108:	685b      	ldr	r3, [r3, #4]
+ 800110a:	091b      	lsrs	r3, r3, #4
+ 800110c:	220f      	movs	r2, #15
+ 800110e:	4013      	ands	r3, r2
+ 8001110:	4a0a      	ldr	r2, [pc, #40]	; (800113c )
+ 8001112:	5cd3      	ldrb	r3, [r2, r3]
+ 8001114:	000a      	movs	r2, r1
+ 8001116:	40da      	lsrs	r2, r3
+ 8001118:	4b09      	ldr	r3, [pc, #36]	; (8001140 )
+ 800111a:	601a      	str	r2, [r3, #0]
+
+  /* Configure the source of time base considering new system clocks settings*/
+  HAL_InitTick (TICK_INT_PRIORITY);
+ 800111c:	2000      	movs	r0, #0
+ 800111e:	f7ff f973 	bl	8000408 
+  
+  return HAL_OK;
+ 8001122:	2300      	movs	r3, #0
+}
+ 8001124:	0018      	movs	r0, r3
+ 8001126:	46bd      	mov	sp, r7
+ 8001128:	b004      	add	sp, #16
+ 800112a:	bd80      	pop	{r7, pc}
+ 800112c:	40022000 	.word	0x40022000
+ 8001130:	40021000 	.word	0x40021000
+ 8001134:	00001388 	.word	0x00001388
+ 8001138:	fffff8ff 	.word	0xfffff8ff
+ 800113c:	0800129c 	.word	0x0800129c
+ 8001140:	20000000 	.word	0x20000000
+
+08001144 :
+  *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *         
+  * @retval SYSCLK frequency
+  */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ 8001144:	b590      	push	{r4, r7, lr}
+ 8001146:	b08f      	sub	sp, #60	; 0x3c
+ 8001148:	af00      	add	r7, sp, #0
+  const uint8_t aPLLMULFactorTable[16] = { 2U,  3U,  4U,  5U,  6U,  7U,  8U,  9U,
+ 800114a:	2314      	movs	r3, #20
+ 800114c:	18fb      	adds	r3, r7, r3
+ 800114e:	4a2b      	ldr	r2, [pc, #172]	; (80011fc )
+ 8001150:	ca13      	ldmia	r2!, {r0, r1, r4}
+ 8001152:	c313      	stmia	r3!, {r0, r1, r4}
+ 8001154:	6812      	ldr	r2, [r2, #0]
+ 8001156:	601a      	str	r2, [r3, #0]
+                                         10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U};
+  const uint8_t aPredivFactorTable[16] = { 1U, 2U,  3U,  4U,  5U,  6U,  7U,  8U,
+ 8001158:	1d3b      	adds	r3, r7, #4
+ 800115a:	4a29      	ldr	r2, [pc, #164]	; (8001200 )
+ 800115c:	ca13      	ldmia	r2!, {r0, r1, r4}
+ 800115e:	c313      	stmia	r3!, {r0, r1, r4}
+ 8001160:	6812      	ldr	r2, [r2, #0]
+ 8001162:	601a      	str	r2, [r3, #0]
+                                           9U,10U, 11U, 12U, 13U, 14U, 15U, 16U};
+
+  uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U;
+ 8001164:	2300      	movs	r3, #0
+ 8001166:	62fb      	str	r3, [r7, #44]	; 0x2c
+ 8001168:	2300      	movs	r3, #0
+ 800116a:	62bb      	str	r3, [r7, #40]	; 0x28
+ 800116c:	2300      	movs	r3, #0
+ 800116e:	637b      	str	r3, [r7, #52]	; 0x34
+ 8001170:	2300      	movs	r3, #0
+ 8001172:	627b      	str	r3, [r7, #36]	; 0x24
+  uint32_t sysclockfreq = 0U;
+ 8001174:	2300      	movs	r3, #0
+ 8001176:	633b      	str	r3, [r7, #48]	; 0x30
+  
+  tmpreg = RCC->CFGR;
+ 8001178:	4b22      	ldr	r3, [pc, #136]	; (8001204 )
+ 800117a:	685b      	ldr	r3, [r3, #4]
+ 800117c:	62fb      	str	r3, [r7, #44]	; 0x2c
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (tmpreg & RCC_CFGR_SWS)
+ 800117e:	6afb      	ldr	r3, [r7, #44]	; 0x2c
+ 8001180:	220c      	movs	r2, #12
+ 8001182:	4013      	ands	r3, r2
+ 8001184:	2b04      	cmp	r3, #4
+ 8001186:	d002      	beq.n	800118e 
+ 8001188:	2b08      	cmp	r3, #8
+ 800118a:	d003      	beq.n	8001194 
+ 800118c:	e02d      	b.n	80011ea 
+  {
+    case RCC_SYSCLKSOURCE_STATUS_HSE:  /* HSE used as system clock */
+    {
+      sysclockfreq = HSE_VALUE;
+ 800118e:	4b1e      	ldr	r3, [pc, #120]	; (8001208 )
+ 8001190:	633b      	str	r3, [r7, #48]	; 0x30
+      break;
+ 8001192:	e02d      	b.n	80011f0 
+    }
+    case RCC_SYSCLKSOURCE_STATUS_PLLCLK:  /* PLL used as system clock */
+    {
+      pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER];
+ 8001194:	6afb      	ldr	r3, [r7, #44]	; 0x2c
+ 8001196:	0c9b      	lsrs	r3, r3, #18
+ 8001198:	220f      	movs	r2, #15
+ 800119a:	4013      	ands	r3, r2
+ 800119c:	2214      	movs	r2, #20
+ 800119e:	18ba      	adds	r2, r7, r2
+ 80011a0:	5cd3      	ldrb	r3, [r2, r3]
+ 80011a2:	627b      	str	r3, [r7, #36]	; 0x24
+      prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER];
+ 80011a4:	4b17      	ldr	r3, [pc, #92]	; (8001204 )
+ 80011a6:	6adb      	ldr	r3, [r3, #44]	; 0x2c
+ 80011a8:	220f      	movs	r2, #15
+ 80011aa:	4013      	ands	r3, r2
+ 80011ac:	1d3a      	adds	r2, r7, #4
+ 80011ae:	5cd3      	ldrb	r3, [r2, r3]
+ 80011b0:	62bb      	str	r3, [r7, #40]	; 0x28
+      if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ 80011b2:	6afa      	ldr	r2, [r7, #44]	; 0x2c
+ 80011b4:	2380      	movs	r3, #128	; 0x80
+ 80011b6:	025b      	lsls	r3, r3, #9
+ 80011b8:	4013      	ands	r3, r2
+ 80011ba:	d009      	beq.n	80011d0 
+      {
+        /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+        pllclk = (uint32_t)((uint64_t) HSE_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul);
+ 80011bc:	6ab9      	ldr	r1, [r7, #40]	; 0x28
+ 80011be:	4812      	ldr	r0, [pc, #72]	; (8001208 )
+ 80011c0:	f7fe ffa2 	bl	8000108 <__udivsi3>
+ 80011c4:	0003      	movs	r3, r0
+ 80011c6:	001a      	movs	r2, r3
+ 80011c8:	6a7b      	ldr	r3, [r7, #36]	; 0x24
+ 80011ca:	4353      	muls	r3, r2
+ 80011cc:	637b      	str	r3, [r7, #52]	; 0x34
+ 80011ce:	e009      	b.n	80011e4 
+#if  (defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC))
+        /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+        pllclk = (uint32_t)((uint64_t) HSI_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul);
+#else
+        /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
+        pllclk = (uint32_t)((uint64_t) (HSI_VALUE >> 1U) * ((uint64_t) pllmul));
+ 80011d0:	6a79      	ldr	r1, [r7, #36]	; 0x24
+ 80011d2:	000a      	movs	r2, r1
+ 80011d4:	0152      	lsls	r2, r2, #5
+ 80011d6:	1a52      	subs	r2, r2, r1
+ 80011d8:	0193      	lsls	r3, r2, #6
+ 80011da:	1a9b      	subs	r3, r3, r2
+ 80011dc:	00db      	lsls	r3, r3, #3
+ 80011de:	185b      	adds	r3, r3, r1
+ 80011e0:	021b      	lsls	r3, r3, #8
+ 80011e2:	637b      	str	r3, [r7, #52]	; 0x34
+#endif
+      }
+      sysclockfreq = pllclk;
+ 80011e4:	6b7b      	ldr	r3, [r7, #52]	; 0x34
+ 80011e6:	633b      	str	r3, [r7, #48]	; 0x30
+      break;
+ 80011e8:	e002      	b.n	80011f0 
+    }
+#endif /* RCC_CFGR_SWS_HSI48 */
+    case RCC_SYSCLKSOURCE_STATUS_HSI:  /* HSI used as system clock source */
+    default: /* HSI used as system clock */
+    {
+      sysclockfreq = HSI_VALUE;
+ 80011ea:	4b07      	ldr	r3, [pc, #28]	; (8001208 )
+ 80011ec:	633b      	str	r3, [r7, #48]	; 0x30
+      break;
+ 80011ee:	46c0      	nop			; (mov r8, r8)
+    }
+  }
+  return sysclockfreq;
+ 80011f0:	6b3b      	ldr	r3, [r7, #48]	; 0x30
+}
+ 80011f2:	0018      	movs	r0, r3
+ 80011f4:	46bd      	mov	sp, r7
+ 80011f6:	b00f      	add	sp, #60	; 0x3c
+ 80011f8:	bd90      	pop	{r4, r7, pc}
+ 80011fa:	46c0      	nop			; (mov r8, r8)
+ 80011fc:	0800127c 	.word	0x0800127c
+ 8001200:	0800128c 	.word	0x0800128c
+ 8001204:	40021000 	.word	0x40021000
+ 8001208:	007a1200 	.word	0x007a1200
+
+0800120c <__libc_init_array>:
+ 800120c:	b570      	push	{r4, r5, r6, lr}
+ 800120e:	2600      	movs	r6, #0
+ 8001210:	4d0c      	ldr	r5, [pc, #48]	; (8001244 <__libc_init_array+0x38>)
+ 8001212:	4c0d      	ldr	r4, [pc, #52]	; (8001248 <__libc_init_array+0x3c>)
+ 8001214:	1b64      	subs	r4, r4, r5
+ 8001216:	10a4      	asrs	r4, r4, #2
+ 8001218:	42a6      	cmp	r6, r4
+ 800121a:	d109      	bne.n	8001230 <__libc_init_array+0x24>
+ 800121c:	2600      	movs	r6, #0
+ 800121e:	f000 f821 	bl	8001264 <_init>
+ 8001222:	4d0a      	ldr	r5, [pc, #40]	; (800124c <__libc_init_array+0x40>)
+ 8001224:	4c0a      	ldr	r4, [pc, #40]	; (8001250 <__libc_init_array+0x44>)
+ 8001226:	1b64      	subs	r4, r4, r5
+ 8001228:	10a4      	asrs	r4, r4, #2
+ 800122a:	42a6      	cmp	r6, r4
+ 800122c:	d105      	bne.n	800123a <__libc_init_array+0x2e>
+ 800122e:	bd70      	pop	{r4, r5, r6, pc}
+ 8001230:	00b3      	lsls	r3, r6, #2
+ 8001232:	58eb      	ldr	r3, [r5, r3]
+ 8001234:	4798      	blx	r3
+ 8001236:	3601      	adds	r6, #1
+ 8001238:	e7ee      	b.n	8001218 <__libc_init_array+0xc>
+ 800123a:	00b3      	lsls	r3, r6, #2
+ 800123c:	58eb      	ldr	r3, [r5, r3]
+ 800123e:	4798      	blx	r3
+ 8001240:	3601      	adds	r6, #1
+ 8001242:	e7f2      	b.n	800122a <__libc_init_array+0x1e>
+ 8001244:	080012ac 	.word	0x080012ac
+ 8001248:	080012ac 	.word	0x080012ac
+ 800124c:	080012ac 	.word	0x080012ac
+ 8001250:	080012b0 	.word	0x080012b0
+
+08001254 :
+ 8001254:	0003      	movs	r3, r0
+ 8001256:	1812      	adds	r2, r2, r0
+ 8001258:	4293      	cmp	r3, r2
+ 800125a:	d100      	bne.n	800125e 
+ 800125c:	4770      	bx	lr
+ 800125e:	7019      	strb	r1, [r3, #0]
+ 8001260:	3301      	adds	r3, #1
+ 8001262:	e7f9      	b.n	8001258 
+
+08001264 <_init>:
+ 8001264:	b5f8      	push	{r3, r4, r5, r6, r7, lr}
+ 8001266:	46c0      	nop			; (mov r8, r8)
+ 8001268:	bcf8      	pop	{r3, r4, r5, r6, r7}
+ 800126a:	bc08      	pop	{r3}
+ 800126c:	469e      	mov	lr, r3
+ 800126e:	4770      	bx	lr
+
+08001270 <_fini>:
+ 8001270:	b5f8      	push	{r3, r4, r5, r6, r7, lr}
+ 8001272:	46c0      	nop			; (mov r8, r8)
+ 8001274:	bcf8      	pop	{r3, r4, r5, r6, r7}
+ 8001276:	bc08      	pop	{r3}
+ 8001278:	469e      	mov	lr, r3
+ 800127a:	4770      	bx	lr
diff --git a/test/Debug/test.map b/test/Debug/test.map
new file mode 100644
index 0000000..0fddcbb
--- /dev/null
+++ b/test/Debug/test.map
@@ -0,0 +1,2690 @@
+Archive member included to satisfy reference by file (symbol)
+
+/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o)
+                              Core/Src/syscalls.o (__errno)
+/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o)
+                              /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (exit)
+/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+                              /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o) (_global_impure_ptr)
+/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o)
+                              /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (__libc_init_array)
+/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o)
+                              /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o (memset)
+/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o)
+                              Core/Src/system_stm32f0xx.o (__aeabi_uidiv)
+/opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o)
+                              /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o) (__aeabi_idiv0)
+
+Allocating common symbols
+Common symbol       size              file
+
+uwTick              0x4               Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+pFlash              0x20              Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+
+Discarded input sections
+
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o
+ .data          0x0000000000000000        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+ .text          0x0000000000000000       0x78 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o
+ .ARM.extab     0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o
+ .ARM.exidx     0x0000000000000000        0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o
+ .ARM.attributes
+                0x0000000000000000       0x1b /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/main.o
+ .text          0x0000000000000000        0x0 Core/Src/main.o
+ .data          0x0000000000000000        0x0 Core/Src/main.o
+ .bss           0x0000000000000000        0x0 Core/Src/main.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_hal_msp.o
+ .text          0x0000000000000000        0x0 Core/Src/stm32f0xx_hal_msp.o
+ .data          0x0000000000000000        0x0 Core/Src/stm32f0xx_hal_msp.o
+ .bss           0x0000000000000000        0x0 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0xa48 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x127 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x2e Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x8e Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x51 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0xef Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x6a Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x1df Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x1c Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0xb5 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x391 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000     0x6e60 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x3c Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000     0x3461 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x174 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x55 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x924 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0xe5 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x12f Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0xb3 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x1a0 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x1ed Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x34 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x43 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x28 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0xb0 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x15a Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000      0x22c Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x60 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0xa5 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x4c Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0x2b Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x0000000000000000       0xf1 Core/Src/stm32f0xx_hal_msp.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/stm32f0xx_it.o
+ .text          0x0000000000000000        0x0 Core/Src/stm32f0xx_it.o
+ .data          0x0000000000000000        0x0 Core/Src/stm32f0xx_it.o
+ .bss           0x0000000000000000        0x0 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0xa48 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x127 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x2e Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x8e Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x51 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0xef Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x6a Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x1df Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x1c Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0xb5 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x391 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000     0x6e60 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x3c Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000     0x3461 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x174 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x55 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x924 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0xe5 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x12f Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0xb3 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x1a0 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x1ed Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x34 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x43 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x28 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0xb0 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x15a Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000      0x22c Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x60 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0xa5 Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x4c Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0x2b Core/Src/stm32f0xx_it.o
+ .debug_macro   0x0000000000000000       0xf1 Core/Src/stm32f0xx_it.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/syscalls.o
+ .text          0x0000000000000000        0x0 Core/Src/syscalls.o
+ .data          0x0000000000000000        0x0 Core/Src/syscalls.o
+ .bss           0x0000000000000000        0x0 Core/Src/syscalls.o
+ .bss.__env     0x0000000000000000        0x4 Core/Src/syscalls.o
+ .data.environ  0x0000000000000000        0x4 Core/Src/syscalls.o
+ .text.initialise_monitor_handles
+                0x0000000000000000        0xa Core/Src/syscalls.o
+ .text._getpid  0x0000000000000000        0xc Core/Src/syscalls.o
+ .text._kill    0x0000000000000000       0x20 Core/Src/syscalls.o
+ .text._exit    0x0000000000000000       0x18 Core/Src/syscalls.o
+ .text._read    0x0000000000000000       0x3a Core/Src/syscalls.o
+ .text._write   0x0000000000000000       0x38 Core/Src/syscalls.o
+ .text._close   0x0000000000000000       0x14 Core/Src/syscalls.o
+ .text._fstat   0x0000000000000000       0x1c Core/Src/syscalls.o
+ .text._isatty  0x0000000000000000       0x12 Core/Src/syscalls.o
+ .text._lseek   0x0000000000000000       0x16 Core/Src/syscalls.o
+ .text._open    0x0000000000000000       0x1c Core/Src/syscalls.o
+ .text._wait    0x0000000000000000       0x1e Core/Src/syscalls.o
+ .text._unlink  0x0000000000000000       0x1e Core/Src/syscalls.o
+ .text._times   0x0000000000000000       0x14 Core/Src/syscalls.o
+ .text._stat    0x0000000000000000       0x1c Core/Src/syscalls.o
+ .text._link    0x0000000000000000       0x20 Core/Src/syscalls.o
+ .text._fork    0x0000000000000000       0x18 Core/Src/syscalls.o
+ .text._execve  0x0000000000000000       0x22 Core/Src/syscalls.o
+ .debug_info    0x0000000000000000      0xebd Core/Src/syscalls.o
+ .debug_abbrev  0x0000000000000000      0x261 Core/Src/syscalls.o
+ .debug_aranges
+                0x0000000000000000       0xa8 Core/Src/syscalls.o
+ .debug_ranges  0x0000000000000000       0x98 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x243 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0xa48 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x40 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x18 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x94 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x3c Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x34 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x57 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x174 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x330 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x52 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x1f Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x43 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x20 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x1a3 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x35 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x6a Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x1c Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x52 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x40 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x40 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0xd7 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x1c Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x3d Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x35 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x122 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x16 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x16 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x29 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x241 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x1c Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x16 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x145 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000      0x189 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x16 Core/Src/syscalls.o
+ .debug_macro   0x0000000000000000       0x88 Core/Src/syscalls.o
+ .debug_line    0x0000000000000000      0x711 Core/Src/syscalls.o
+ .debug_str     0x0000000000000000     0x87e4 Core/Src/syscalls.o
+ .comment       0x0000000000000000       0x7c Core/Src/syscalls.o
+ .debug_frame   0x0000000000000000      0x244 Core/Src/syscalls.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Core/Src/syscalls.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/sysmem.o
+ .text          0x0000000000000000        0x0 Core/Src/sysmem.o
+ .data          0x0000000000000000        0x0 Core/Src/sysmem.o
+ .bss           0x0000000000000000        0x0 Core/Src/sysmem.o
+ .bss.__sbrk_heap_end
+                0x0000000000000000        0x4 Core/Src/sysmem.o
+ .text._sbrk    0x0000000000000000       0x6c Core/Src/sysmem.o
+ .debug_info    0x0000000000000000      0x985 Core/Src/sysmem.o
+ .debug_abbrev  0x0000000000000000      0x19b Core/Src/sysmem.o
+ .debug_aranges
+                0x0000000000000000       0x20 Core/Src/sysmem.o
+ .debug_ranges  0x0000000000000000       0x10 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0xee Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000      0xa48 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x10 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x40 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x18 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x94 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x3c Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x34 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000      0x174 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x57 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x52 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x1f Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x43 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x20 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000      0x1a3 Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000      0x23b Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0xef Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000       0x6a Core/Src/sysmem.o
+ .debug_macro   0x0000000000000000      0x1df Core/Src/sysmem.o
+ .debug_line    0x0000000000000000      0x49a Core/Src/sysmem.o
+ .debug_str     0x0000000000000000     0x5eb2 Core/Src/sysmem.o
+ .comment       0x0000000000000000       0x7c Core/Src/sysmem.o
+ .debug_frame   0x0000000000000000       0x30 Core/Src/sysmem.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Core/Src/sysmem.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .group         0x0000000000000000        0xc Core/Src/system_stm32f0xx.o
+ .text          0x0000000000000000        0x0 Core/Src/system_stm32f0xx.o
+ .data          0x0000000000000000        0x0 Core/Src/system_stm32f0xx.o
+ .bss           0x0000000000000000        0x0 Core/Src/system_stm32f0xx.o
+ .rodata.APBPrescTable
+                0x0000000000000000        0x8 Core/Src/system_stm32f0xx.o
+ .text.SystemCoreClockUpdate
+                0x0000000000000000       0xe0 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0xa48 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x2e Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x8e Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x51 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0xef Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x6a Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x1df Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x1c Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x22 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0xb5 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x391 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000     0x6e60 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x3c Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x127 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000     0x3461 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x174 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x55 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x924 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0xe5 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x12f Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0xb3 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x1a0 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x1ed Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x34 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x43 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x28 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0xb0 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x15a Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000      0x22c Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x60 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0xa5 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x4c Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0x2b Core/Src/system_stm32f0xx.o
+ .debug_macro   0x0000000000000000       0xf1 Core/Src/system_stm32f0xx.o
+ .text          0x0000000000000000       0x14 Core/Startup/startup_stm32f030f4px.o
+ .data          0x0000000000000000        0x0 Core/Startup/startup_stm32f030f4px.o
+ .bss           0x0000000000000000        0x0 Core/Startup/startup_stm32f030f4px.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_DeInit
+                0x0000000000000000       0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_MspInit
+                0x0000000000000000        0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_MspDeInit
+                0x0000000000000000        0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetTickPrio
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_SetTickFreq
+                0x0000000000000000       0x6c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetTickFreq
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_SuspendTick
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_ResumeTick
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetHalVersion
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetREVID
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetDEVID
+                0x0000000000000000       0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetUIDw0
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetUIDw1
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_GetUIDw2
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_DBGMCU_EnableDBGStopMode
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_DBGMCU_DisableDBGStopMode
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_DBGMCU_EnableDBGStandbyMode
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .text.HAL_DBGMCU_DisableDBGStandbyMode
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.__NVIC_EnableIRQ
+                0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.__NVIC_DisableIRQ
+                0x0000000000000000       0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.__NVIC_GetPendingIRQ
+                0x0000000000000000       0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.__NVIC_SetPendingIRQ
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.__NVIC_ClearPendingIRQ
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.__NVIC_GetPriority
+                0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.__NVIC_SystemReset
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_EnableIRQ
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_DisableIRQ
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_SystemReset
+                0x0000000000000000        0x8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_GetPriority
+                0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_SetPendingIRQ
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_GetPendingIRQ
+                0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_ClearPendingIRQ
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_SYSTICK_CLKSourceConfig
+                0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_SYSTICK_IRQHandler
+                0x0000000000000000        0xe Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_SYSTICK_Callback
+                0x0000000000000000        0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_Init
+                0x0000000000000000       0x90 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_DeInit
+                0x0000000000000000       0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_Start
+                0x0000000000000000       0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_Start_IT
+                0x0000000000000000       0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_Abort
+                0x0000000000000000       0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_Abort_IT
+                0x0000000000000000       0x8c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_PollForTransfer
+                0x0000000000000000      0x132 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_IRQHandler
+                0x0000000000000000      0x144 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_RegisterCallback
+                0x0000000000000000       0xa2 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_UnRegisterCallback
+                0x0000000000000000       0xb4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .rodata.HAL_DMA_UnRegisterCallback
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_GetState
+                0x0000000000000000       0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.HAL_DMA_GetError
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.DMA_SetConfig
+                0x0000000000000000       0x58 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .text.DMA_CalcBaseAndBitshift
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_info    0x0000000000000000      0x79f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_abbrev  0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_aranges
+                0x0000000000000000       0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_ranges  0x0000000000000000       0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_line    0x0000000000000000      0x869 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_str     0x0000000000000000    0x524a5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .debug_frame   0x0000000000000000      0x1d0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_SetConfigLine
+                0x0000000000000000      0x148 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_GetConfigLine
+                0x0000000000000000       0xfc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_ClearConfigLine
+                0x0000000000000000       0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_RegisterCallback
+                0x0000000000000000       0x42 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_GetHandle
+                0x0000000000000000       0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_IRQHandler
+                0x0000000000000000       0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_GetPending
+                0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_ClearPending
+                0x0000000000000000       0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .text.HAL_EXTI_GenerateSWI
+                0x0000000000000000       0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_info    0x0000000000000000      0x59a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_abbrev  0x0000000000000000      0x193 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_aranges
+                0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_ranges  0x0000000000000000       0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_line    0x0000000000000000      0x752 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_str     0x0000000000000000    0x5226f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .debug_frame   0x0000000000000000      0x130 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_Program
+                0x0000000000000000      0x12c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_Program_IT
+                0x0000000000000000       0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_IRQHandler
+                0x0000000000000000      0x1d0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_EndOfOperationCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_OperationErrorCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_Unlock
+                0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_Lock
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_OB_Unlock
+                0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_OB_Lock
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_OB_Launch
+                0x0000000000000000       0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.HAL_FLASH_GetError
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.FLASH_Program_HalfWord
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.FLASH_WaitForLastOperation
+                0x0000000000000000       0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .text.FLASH_SetErrorCode
+                0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_info    0x0000000000000000      0x574 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_abbrev  0x0000000000000000      0x205 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_aranges
+                0x0000000000000000       0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_ranges  0x0000000000000000       0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_line    0x0000000000000000      0x815 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_str     0x0000000000000000    0x52388 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .debug_frame   0x0000000000000000      0x1c4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ COMMON         0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.HAL_FLASHEx_Erase
+                0x0000000000000000       0xec Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.HAL_FLASHEx_Erase_IT
+                0x0000000000000000       0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.HAL_FLASHEx_OBErase
+                0x0000000000000000       0x9c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.HAL_FLASHEx_OBProgram
+                0x0000000000000000      0x128 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.HAL_FLASHEx_OBGetConfig
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.HAL_FLASHEx_OBGetUserData
+                0x0000000000000000       0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_MassErase
+                0x0000000000000000       0x30 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_EnableWRP
+                0x0000000000000000       0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_DisableWRP
+                0x0000000000000000       0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_RDP_LevelConfig
+                0x0000000000000000       0xbc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_UserConfig
+                0x0000000000000000       0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_ProgramData
+                0x0000000000000000       0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_GetWRP
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_GetRDP
+                0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_OB_GetUser
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .text.FLASH_PageErase
+                0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_info    0x0000000000000000      0x732 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_abbrev  0x0000000000000000      0x1f0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_aranges
+                0x0000000000000000       0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_ranges  0x0000000000000000       0x88 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x1ab Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_line    0x0000000000000000      0x853 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_str     0x0000000000000000    0x524db Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .debug_frame   0x0000000000000000      0x220 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .text.HAL_GPIO_DeInit
+                0x0000000000000000      0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .text.HAL_GPIO_ReadPin
+                0x0000000000000000       0x3a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .text.HAL_GPIO_TogglePin
+                0x0000000000000000       0x36 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .text.HAL_GPIO_LockPin
+                0x0000000000000000       0x52 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .text.HAL_GPIO_EXTI_IRQHandler
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .text.HAL_GPIO_EXTI_Callback
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Init
+                0x0000000000000000      0x12c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_DeInit
+                0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_MspInit
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_MspDeInit
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Transmit
+                0x0000000000000000      0x210 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Receive
+                0x0000000000000000      0x210 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Transmit
+                0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Receive
+                0x0000000000000000      0x214 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Transmit_IT
+                0x0000000000000000       0xf8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Receive_IT
+                0x0000000000000000       0xf8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Transmit_IT
+                0x0000000000000000       0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Receive_IT
+                0x0000000000000000       0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Transmit_DMA
+                0x0000000000000000      0x20c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Receive_DMA
+                0x0000000000000000      0x20c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Transmit_DMA
+                0x0000000000000000      0x180 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Receive_DMA
+                0x0000000000000000      0x180 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Mem_Write
+                0x0000000000000000      0x25c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Mem_Read
+                0x0000000000000000      0x268 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Mem_Write_IT
+                0x0000000000000000      0x150 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Mem_Read_IT
+                0x0000000000000000      0x154 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Mem_Write_DMA
+                0x0000000000000000      0x21c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Mem_Read_DMA
+                0x0000000000000000      0x220 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_IsDeviceReady
+                0x0000000000000000      0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Seq_Transmit_IT
+                0x0000000000000000      0x124 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Seq_Transmit_DMA
+                0x0000000000000000      0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Seq_Receive_IT
+                0x0000000000000000      0x124 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Seq_Receive_DMA
+                0x0000000000000000      0x234 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Seq_Transmit_IT
+                0x0000000000000000      0x160 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Seq_Transmit_DMA
+                0x0000000000000000      0x298 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Seq_Receive_IT
+                0x0000000000000000      0x164 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Slave_Seq_Receive_DMA
+                0x0000000000000000      0x294 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_EnableListen_IT
+                0x0000000000000000       0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_DisableListen_IT
+                0x0000000000000000       0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_Master_Abort_IT
+                0x0000000000000000       0xac Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_EV_IRQHandler
+                0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_ER_IRQHandler
+                0x0000000000000000       0xc4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_MasterTxCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_MasterRxCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_SlaveTxCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_SlaveRxCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_AddrCallback
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_ListenCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_MemTxCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_MemRxCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_ErrorCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_AbortCpltCallback
+                0x0000000000000000       0x10 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_GetState
+                0x0000000000000000       0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_GetMode
+                0x0000000000000000       0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.HAL_I2C_GetError
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_Master_ISR_IT
+                0x0000000000000000      0x288 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_Slave_ISR_IT
+                0x0000000000000000      0x228 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_Master_ISR_DMA
+                0x0000000000000000      0x218 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_Slave_ISR_DMA
+                0x0000000000000000      0x1f0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_RequestMemoryWrite
+                0x0000000000000000       0xc8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_RequestMemoryRead
+                0x0000000000000000       0xc4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ITAddrCplt
+                0x0000000000000000      0x152 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ITMasterSeqCplt
+                0x0000000000000000       0x82 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ITSlaveSeqCplt
+                0x0000000000000000       0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ITMasterCplt
+                0x0000000000000000      0x1a4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ITSlaveCplt
+                0x0000000000000000      0x24c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ITListenCplt
+                0x0000000000000000       0xb4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ITError
+                0x0000000000000000      0x1c8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_TreatErrorCallback
+                0x0000000000000000       0x52 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_Flush_TXDR
+                0x0000000000000000       0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_DMAMasterTransmitCplt
+                0x0000000000000000       0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_DMASlaveTransmitCplt
+                0x0000000000000000       0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_DMAMasterReceiveCplt
+                0x0000000000000000       0xa0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_DMASlaveReceiveCplt
+                0x0000000000000000       0x50 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_DMAError
+                0x0000000000000000       0x32 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_DMAAbort
+                0x0000000000000000       0x3e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_WaitOnFlagUntilTimeout
+                0x0000000000000000       0x7e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_WaitOnTXISFlagUntilTimeout
+                0x0000000000000000       0x7e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_WaitOnSTOPFlagUntilTimeout
+                0x0000000000000000       0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_WaitOnRXNEFlagUntilTimeout
+                0x0000000000000000       0xd8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_IsAcknowledgeFailed
+                0x0000000000000000       0xcc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_TransferConfig
+                0x0000000000000000       0x6c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_Enable_IRQ
+                0x0000000000000000       0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_Disable_IRQ
+                0x0000000000000000       0xc6 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .text.I2C_ConvertOtherXferOptions
+                0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_info    0x0000000000000000     0x1fb9 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_abbrev  0x0000000000000000      0x239 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_aranges
+                0x0000000000000000      0x290 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_ranges  0x0000000000000000      0x280 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x25e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_line    0x0000000000000000     0x1a45 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_str     0x0000000000000000    0x5337f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .debug_frame   0x0000000000000000      0xa20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .text.HAL_I2CEx_ConfigAnalogFilter
+                0x0000000000000000       0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .text.HAL_I2CEx_ConfigDigitalFilter
+                0x0000000000000000       0x98 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .text.HAL_I2CEx_EnableFastModePlus
+                0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .text.HAL_I2CEx_DisableFastModePlus
+                0x0000000000000000       0x40 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_info    0x0000000000000000      0x869 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_abbrev  0x0000000000000000      0x1c8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_aranges
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_ranges  0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_line    0x0000000000000000      0x713 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_str     0x0000000000000000    0x5263c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .debug_frame   0x0000000000000000       0x90 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_DeInit
+                0x0000000000000000       0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_EnableBkUpAccess
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_DisableBkUpAccess
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_EnableWakeUpPin
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_DisableWakeUpPin
+                0x0000000000000000       0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_EnterSLEEPMode
+                0x0000000000000000       0x38 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_EnterSTOPMode
+                0x0000000000000000       0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_EnterSTANDBYMode
+                0x0000000000000000       0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_EnableSleepOnExit
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_DisableSleepOnExit
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_EnableSEVOnPend
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .text.HAL_PWR_DisableSEVOnPend
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_info    0x0000000000000000      0x43a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_abbrev  0x0000000000000000      0x15f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_aranges
+                0x0000000000000000       0x78 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_ranges  0x0000000000000000       0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_line    0x0000000000000000      0x73e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_str     0x0000000000000000    0x52236 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .debug_frame   0x0000000000000000      0x170 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_info    0x0000000000000000      0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_abbrev  0x0000000000000000       0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_aranges
+                0x0000000000000000       0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x1b1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_line    0x0000000000000000      0x653 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .debug_str     0x0000000000000000    0x520c8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_DeInit
+                0x0000000000000000      0x10c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_MCOConfig
+                0x0000000000000000       0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_EnableCSS
+                0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_DisableCSS
+                0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_GetHCLKFreq
+                0x0000000000000000       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_GetPCLK1Freq
+                0x0000000000000000       0x2c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_GetOscConfig
+                0x0000000000000000      0x134 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_GetClockConfig
+                0x0000000000000000       0x54 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_NMI_IRQHandler
+                0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .text.HAL_RCC_CSSCallback
+                0x0000000000000000        0xa Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .text.HAL_RCCEx_PeriphCLKConfig
+                0x0000000000000000      0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .text.HAL_RCCEx_GetPeriphCLKConfig
+                0x0000000000000000       0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .text.HAL_RCCEx_GetPeriphCLKFreq
+                0x0000000000000000      0x144 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_info    0x0000000000000000      0x3cb Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_abbrev  0x0000000000000000      0x175 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_aranges
+                0x0000000000000000       0x30 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_ranges  0x0000000000000000       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_line    0x0000000000000000      0x726 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_str     0x0000000000000000    0x52209 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .debug_frame   0x0000000000000000       0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_info    0x0000000000000000      0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_abbrev  0x0000000000000000       0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_aranges
+                0x0000000000000000       0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x19a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_line    0x0000000000000000      0x650 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .debug_str     0x0000000000000000    0x52053 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .group         0x0000000000000000        0xc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .text          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .data          0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .bss           0x0000000000000000        0x0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_info    0x0000000000000000      0x145 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_abbrev  0x0000000000000000       0x92 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_aranges
+                0x0000000000000000       0x18 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0xa48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x127 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x2e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x8e Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x51 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0xef Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x6a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x1df Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x1c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x22 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0xb5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x391 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000     0x6e60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x3c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000     0x3461 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x174 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x55 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x924 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0xe5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x12f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0xb3 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x1a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x1ed Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x34 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x43 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x15a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000      0x22c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x60 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0xa5 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x4c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0x2b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_macro   0x0000000000000000       0xf1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_line    0x0000000000000000      0x653 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .debug_str     0x0000000000000000    0x52056 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .comment       0x0000000000000000       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .ARM.attributes
+                0x0000000000000000       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o)
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o)
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o)
+ .text.__errno  0x0000000000000000        0xc /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o)
+ .debug_frame   0x0000000000000000       0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o)
+ .ARM.attributes
+                0x0000000000000000       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-errno.o)
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o)
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o)
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o)
+ .text.exit     0x0000000000000000       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o)
+ .debug_frame   0x0000000000000000       0x28 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o)
+ .ARM.attributes
+                0x0000000000000000       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-exit.o)
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+ .data._impure_ptr
+                0x0000000000000000        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+ .data.impure_data
+                0x0000000000000000       0x60 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+ .rodata._global_impure_ptr
+                0x0000000000000000        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+ .ARM.attributes
+                0x0000000000000000       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-impure.o)
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o)
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o)
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o)
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o)
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o)
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o)
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o)
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o)
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o)
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o)
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o
+ .eh_frame      0x0000000000000000        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o
+ .ARM.attributes
+                0x0000000000000000       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o
+ .text          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o
+ .data          0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o
+ .bss           0x0000000000000000        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o
+
+Memory Configuration
+
+Name             Origin             Length             Attributes
+RAM              0x0000000020000000 0x0000000000001000 xrw
+FLASH            0x0000000008000000 0x0000000000004000 xr
+*default*        0x0000000000000000 0xffffffffffffffff
+
+Linker script and memory map
+
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/crt0.o
+LOAD Core/Src/main.o
+LOAD Core/Src/stm32f0xx_hal_msp.o
+LOAD Core/Src/stm32f0xx_it.o
+LOAD Core/Src/syscalls.o
+LOAD Core/Src/sysmem.o
+LOAD Core/Src/system_stm32f0xx.o
+LOAD Core/Startup/startup_stm32f030f4px.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.o
+LOAD Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.o
+START GROUP
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libm.a
+END GROUP
+START GROUP
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a
+END GROUP
+START GROUP
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libnosys.a
+END GROUP
+START GROUP
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libnosys.a
+END GROUP
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtend.o
+LOAD /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o
+                0x0000000020001000                _estack = (ORIGIN (RAM) + LENGTH (RAM))
+                0x0000000000000200                _Min_Heap_Size = 0x200
+                0x0000000000000400                _Min_Stack_Size = 0x400
+
+.isr_vector     0x0000000008000000       0xc0
+                0x0000000008000000                . = ALIGN (0x4)
+ *(.isr_vector)
+ .isr_vector    0x0000000008000000       0xc0 Core/Startup/startup_stm32f030f4px.o
+                0x0000000008000000                g_pfnVectors
+                0x00000000080000c0                . = ALIGN (0x4)
+
+.text           0x00000000080000c0     0x11bc
+                0x00000000080000c0                . = ALIGN (0x4)
+ *(.text)
+ .text          0x00000000080000c0       0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+ .text          0x0000000008000108      0x114 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o)
+                0x0000000008000108                __udivsi3
+                0x0000000008000108                __aeabi_uidiv
+                0x0000000008000214                __aeabi_uidivmod
+ .text          0x000000000800021c        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o)
+                0x000000000800021c                __aeabi_ldiv0
+                0x000000000800021c                __aeabi_idiv0
+ *(.text*)
+ .text.main     0x0000000008000220       0x66 Core/Src/main.o
+                0x0000000008000220                main
+ .text.SystemClock_Config
+                0x0000000008000286       0x80 Core/Src/main.o
+                0x0000000008000286                SystemClock_Config
+ .text.Error_Handler
+                0x0000000008000306        0x6 Core/Src/main.o
+                0x0000000008000306                Error_Handler
+ .text.HAL_MspInit
+                0x000000000800030c       0x48 Core/Src/stm32f0xx_hal_msp.o
+                0x000000000800030c                HAL_MspInit
+ .text.NMI_Handler
+                0x0000000008000354        0x6 Core/Src/stm32f0xx_it.o
+                0x0000000008000354                NMI_Handler
+ .text.HardFault_Handler
+                0x000000000800035a        0x6 Core/Src/stm32f0xx_it.o
+                0x000000000800035a                HardFault_Handler
+ .text.SVC_Handler
+                0x0000000008000360        0xa Core/Src/stm32f0xx_it.o
+                0x0000000008000360                SVC_Handler
+ .text.PendSV_Handler
+                0x000000000800036a        0xa Core/Src/stm32f0xx_it.o
+                0x000000000800036a                PendSV_Handler
+ .text.SysTick_Handler
+                0x0000000008000374        0xe Core/Src/stm32f0xx_it.o
+                0x0000000008000374                SysTick_Handler
+ .text.SystemInit
+                0x0000000008000382        0xa Core/Src/system_stm32f0xx.o
+                0x0000000008000382                SystemInit
+ .text.Reset_Handler
+                0x000000000800038c       0x50 Core/Startup/startup_stm32f030f4px.o
+                0x000000000800038c                Reset_Handler
+ .text.Default_Handler
+                0x00000000080003dc        0x2 Core/Startup/startup_stm32f030f4px.o
+                0x00000000080003dc                TIM1_CC_IRQHandler
+                0x00000000080003dc                I2C1_IRQHandler
+                0x00000000080003dc                SPI1_IRQHandler
+                0x00000000080003dc                EXTI2_3_IRQHandler
+                0x00000000080003dc                ADC1_IRQHandler
+                0x00000000080003dc                TIM17_IRQHandler
+                0x00000000080003dc                RTC_IRQHandler
+                0x00000000080003dc                TIM16_IRQHandler
+                0x00000000080003dc                TIM3_IRQHandler
+                0x00000000080003dc                EXTI4_15_IRQHandler
+                0x00000000080003dc                RCC_IRQHandler
+                0x00000000080003dc                DMA1_Channel1_IRQHandler
+                0x00000000080003dc                Default_Handler
+                0x00000000080003dc                TIM14_IRQHandler
+                0x00000000080003dc                DMA1_Channel4_5_IRQHandler
+                0x00000000080003dc                EXTI0_1_IRQHandler
+                0x00000000080003dc                WWDG_IRQHandler
+                0x00000000080003dc                DMA1_Channel2_3_IRQHandler
+                0x00000000080003dc                FLASH_IRQHandler
+                0x00000000080003dc                USART1_IRQHandler
+                0x00000000080003dc                TIM1_BRK_UP_TRG_COM_IRQHandler
+ *fill*         0x00000000080003de        0x2 
+ .text.HAL_Init
+                0x00000000080003e0       0x28 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x00000000080003e0                HAL_Init
+ .text.HAL_InitTick
+                0x0000000008000408       0x68 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x0000000008000408                HAL_InitTick
+ .text.HAL_IncTick
+                0x0000000008000470       0x24 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x0000000008000470                HAL_IncTick
+ .text.HAL_GetTick
+                0x0000000008000494       0x14 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x0000000008000494                HAL_GetTick
+ .text.HAL_Delay
+                0x00000000080004a8       0x44 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x00000000080004a8                HAL_Delay
+ .text.__NVIC_SetPriority
+                0x00000000080004ec       0xdc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.SysTick_Config
+                0x00000000080005c8       0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .text.HAL_NVIC_SetPriority
+                0x0000000008000610       0x2a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+                0x0000000008000610                HAL_NVIC_SetPriority
+ .text.HAL_SYSTICK_Config
+                0x000000000800063a       0x1a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+                0x000000000800063a                HAL_SYSTICK_Config
+ .text.HAL_GPIO_Init
+                0x0000000008000654      0x2e0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+                0x0000000008000654                HAL_GPIO_Init
+ .text.HAL_GPIO_WritePin
+                0x0000000008000934       0x3a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+                0x0000000008000934                HAL_GPIO_WritePin
+ *fill*         0x000000000800096e        0x2 
+ .text.HAL_RCC_OscConfig
+                0x0000000008000970      0x638 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+                0x0000000008000970                HAL_RCC_OscConfig
+ .text.HAL_RCC_ClockConfig
+                0x0000000008000fa8      0x19c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+                0x0000000008000fa8                HAL_RCC_ClockConfig
+ .text.HAL_RCC_GetSysClockFreq
+                0x0000000008001144       0xc8 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+                0x0000000008001144                HAL_RCC_GetSysClockFreq
+ .text.__libc_init_array
+                0x000000000800120c       0x48 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o)
+                0x000000000800120c                __libc_init_array
+ .text.memset   0x0000000008001254       0x10 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o)
+                0x0000000008001254                memset
+ *(.glue_7)
+ .glue_7        0x0000000008001264        0x0 linker stubs
+ *(.glue_7t)
+ .glue_7t       0x0000000008001264        0x0 linker stubs
+ *(.eh_frame)
+ .eh_frame      0x0000000008001264        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+ *(.init)
+ .init          0x0000000008001264        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o
+                0x0000000008001264                _init
+ .init          0x0000000008001268        0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o
+ *(.fini)
+ .fini          0x0000000008001270        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o
+                0x0000000008001270                _fini
+ .fini          0x0000000008001274        0x8 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o
+                0x000000000800127c                . = ALIGN (0x4)
+                0x000000000800127c                _etext = .
+
+.vfp11_veneer   0x000000000800127c        0x0
+ .vfp11_veneer  0x000000000800127c        0x0 linker stubs
+
+.v4_bx          0x000000000800127c        0x0
+ .v4_bx         0x000000000800127c        0x0 linker stubs
+
+.iplt           0x000000000800127c        0x0
+ .iplt          0x000000000800127c        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+
+.rodata         0x000000000800127c       0x30
+                0x000000000800127c                . = ALIGN (0x4)
+ *(.rodata)
+ .rodata        0x000000000800127c       0x20 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ *(.rodata*)
+ .rodata.AHBPrescTable
+                0x000000000800129c       0x10 Core/Src/system_stm32f0xx.o
+                0x000000000800129c                AHBPrescTable
+                0x00000000080012ac                . = ALIGN (0x4)
+
+.rel.dyn        0x00000000080012ac        0x0
+ .rel.iplt      0x00000000080012ac        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+
+.ARM.extab      0x00000000080012ac        0x0
+                0x00000000080012ac                . = ALIGN (0x4)
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+                0x00000000080012ac                . = ALIGN (0x4)
+
+.ARM            0x00000000080012ac        0x0
+                0x00000000080012ac                . = ALIGN (0x4)
+                0x00000000080012ac                __exidx_start = .
+ *(.ARM.exidx*)
+                0x00000000080012ac                __exidx_end = .
+                0x00000000080012ac                . = ALIGN (0x4)
+
+.preinit_array  0x00000000080012ac        0x0
+                0x00000000080012ac                . = ALIGN (0x4)
+                0x00000000080012ac                PROVIDE (__preinit_array_start = .)
+ *(.preinit_array*)
+                0x00000000080012ac                PROVIDE (__preinit_array_end = .)
+                0x00000000080012ac                . = ALIGN (0x4)
+
+.init_array     0x00000000080012ac        0x4
+                0x00000000080012ac                . = ALIGN (0x4)
+                0x00000000080012ac                PROVIDE (__init_array_start = .)
+ *(SORT_BY_NAME(.init_array.*))
+ *(.init_array*)
+ .init_array    0x00000000080012ac        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+                0x00000000080012b0                PROVIDE (__init_array_end = .)
+                0x00000000080012b0                . = ALIGN (0x4)
+
+.fini_array     0x00000000080012b0        0x4
+                0x00000000080012b0                . = ALIGN (0x4)
+                [!provide]                        PROVIDE (__fini_array_start = .)
+ *(SORT_BY_NAME(.fini_array.*))
+ *(.fini_array*)
+ .fini_array    0x00000000080012b0        0x4 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+                [!provide]                        PROVIDE (__fini_array_end = .)
+                0x00000000080012b4                . = ALIGN (0x4)
+                0x00000000080012b4                _sidata = LOADADDR (.data)
+
+.data           0x0000000020000000        0xc load address 0x00000000080012b4
+                0x0000000020000000                . = ALIGN (0x4)
+                0x0000000020000000                _sdata = .
+ *(.data)
+ *(.data*)
+ .data.SystemCoreClock
+                0x0000000020000000        0x4 Core/Src/system_stm32f0xx.o
+                0x0000000020000000                SystemCoreClock
+ .data.uwTickPrio
+                0x0000000020000004        0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x0000000020000004                uwTickPrio
+ .data.uwTickFreq
+                0x0000000020000008        0x1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x0000000020000008                uwTickFreq
+ *(.RamFunc)
+ *(.RamFunc*)
+                0x000000002000000c                . = ALIGN (0x4)
+ *fill*         0x0000000020000009        0x3 
+                0x000000002000000c                _edata = .
+
+.igot.plt       0x000000002000000c        0x0 load address 0x00000000080012c0
+ .igot.plt      0x000000002000000c        0x0 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+                0x000000002000000c                . = ALIGN (0x4)
+
+.bss            0x000000002000000c       0x20 load address 0x00000000080012c0
+                0x000000002000000c                _sbss = .
+                0x000000002000000c                __bss_start__ = _sbss
+ *(.bss)
+ .bss           0x000000002000000c       0x1c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+ *(.bss*)
+ *(COMMON)
+ COMMON         0x0000000020000028        0x4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                0x0000000020000028                uwTick
+                0x000000002000002c                . = ALIGN (0x4)
+                0x000000002000002c                _ebss = .
+                0x000000002000002c                __bss_end__ = _ebss
+
+._user_heap_stack
+                0x000000002000002c      0x604 load address 0x00000000080012c0
+                0x0000000020000030                . = ALIGN (0x8)
+ *fill*         0x000000002000002c        0x4 
+                [!provide]                        PROVIDE (end = .)
+                0x0000000020000030                PROVIDE (_end = .)
+                0x0000000020000230                . = (. + _Min_Heap_Size)
+ *fill*         0x0000000020000030      0x200 
+                0x0000000020000630                . = (. + _Min_Stack_Size)
+ *fill*         0x0000000020000230      0x400 
+                0x0000000020000630                . = ALIGN (0x8)
+
+/DISCARD/
+ libc.a(*)
+ libm.a(*)
+ libgcc.a(*)
+
+.ARM.attributes
+                0x0000000000000000       0x28
+ *(.ARM.attributes)
+ .ARM.attributes
+                0x0000000000000000       0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crti.o
+ .ARM.attributes
+                0x000000000000001e       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtbegin.o
+ .ARM.attributes
+                0x000000000000004a       0x31 Core/Src/main.o
+ .ARM.attributes
+                0x000000000000007b       0x31 Core/Src/stm32f0xx_hal_msp.o
+ .ARM.attributes
+                0x00000000000000ac       0x31 Core/Src/stm32f0xx_it.o
+ .ARM.attributes
+                0x00000000000000dd       0x31 Core/Src/system_stm32f0xx.o
+ .ARM.attributes
+                0x000000000000010e       0x21 Core/Startup/startup_stm32f030f4px.o
+ .ARM.attributes
+                0x000000000000012f       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .ARM.attributes
+                0x0000000000000160       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .ARM.attributes
+                0x0000000000000191       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .ARM.attributes
+                0x00000000000001c2       0x31 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .ARM.attributes
+                0x00000000000001f3       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o)
+ .ARM.attributes
+                0x000000000000021f       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o)
+ .ARM.attributes
+                0x000000000000024b       0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o)
+ .ARM.attributes
+                0x0000000000000269       0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_dvmd_tls.o)
+ .ARM.attributes
+                0x0000000000000287       0x1e /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/crtn.o
+OUTPUT(test.elf elf32-littlearm)
+
+.debug_info     0x0000000000000000     0x26ec
+ .debug_info    0x0000000000000000      0x408 Core/Src/main.o
+ .debug_info    0x0000000000000408      0x25e Core/Src/stm32f0xx_hal_msp.o
+ .debug_info    0x0000000000000666      0x1a2 Core/Src/stm32f0xx_it.o
+ .debug_info    0x0000000000000808      0x29e Core/Src/system_stm32f0xx.o
+ .debug_info    0x0000000000000aa6       0x22 Core/Startup/startup_stm32f030f4px.o
+ .debug_info    0x0000000000000ac8      0x667 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_info    0x000000000000112f      0x744 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_info    0x0000000000001873      0x66f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_info    0x0000000000001ee2      0x80a Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+
+.debug_abbrev   0x0000000000000000      0xc78
+ .debug_abbrev  0x0000000000000000      0x138 Core/Src/main.o
+ .debug_abbrev  0x0000000000000138      0x109 Core/Src/stm32f0xx_hal_msp.o
+ .debug_abbrev  0x0000000000000241       0xc6 Core/Src/stm32f0xx_it.o
+ .debug_abbrev  0x0000000000000307      0x12b Core/Src/system_stm32f0xx.o
+ .debug_abbrev  0x0000000000000432       0x12 Core/Startup/startup_stm32f030f4px.o
+ .debug_abbrev  0x0000000000000444      0x1f2 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_abbrev  0x0000000000000636      0x273 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_abbrev  0x00000000000008a9      0x1c0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_abbrev  0x0000000000000a69      0x20f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+
+.debug_aranges  0x0000000000000000      0x348
+ .debug_aranges
+                0x0000000000000000       0x30 Core/Src/main.o
+ .debug_aranges
+                0x0000000000000030       0x20 Core/Src/stm32f0xx_hal_msp.o
+ .debug_aranges
+                0x0000000000000050       0x40 Core/Src/stm32f0xx_it.o
+ .debug_aranges
+                0x0000000000000090       0x28 Core/Src/system_stm32f0xx.o
+ .debug_aranges
+                0x00000000000000b8       0x28 Core/Startup/startup_stm32f030f4px.o
+ .debug_aranges
+                0x00000000000000e0       0xd0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_aranges
+                0x00000000000001b0       0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_aranges
+                0x0000000000000270       0x58 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_aranges
+                0x00000000000002c8       0x80 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+
+.debug_ranges   0x0000000000000000      0x2c0
+ .debug_ranges  0x0000000000000000       0x20 Core/Src/main.o
+ .debug_ranges  0x0000000000000020       0x10 Core/Src/stm32f0xx_hal_msp.o
+ .debug_ranges  0x0000000000000030       0x30 Core/Src/stm32f0xx_it.o
+ .debug_ranges  0x0000000000000060       0x18 Core/Src/system_stm32f0xx.o
+ .debug_ranges  0x0000000000000078       0x20 Core/Startup/startup_stm32f030f4px.o
+ .debug_ranges  0x0000000000000098       0xc0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_ranges  0x0000000000000158       0xb0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_ranges  0x0000000000000208       0x48 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_ranges  0x0000000000000250       0x70 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+
+.debug_macro    0x0000000000000000     0xdd5a
+ .debug_macro   0x0000000000000000      0x1a3 Core/Src/main.o
+ .debug_macro   0x00000000000001a3      0xa48 Core/Src/main.o
+ .debug_macro   0x0000000000000beb      0x127 Core/Src/main.o
+ .debug_macro   0x0000000000000d12       0x2e Core/Src/main.o
+ .debug_macro   0x0000000000000d40       0x22 Core/Src/main.o
+ .debug_macro   0x0000000000000d62       0x22 Core/Src/main.o
+ .debug_macro   0x0000000000000d84       0x8e Core/Src/main.o
+ .debug_macro   0x0000000000000e12       0x51 Core/Src/main.o
+ .debug_macro   0x0000000000000e63       0xef Core/Src/main.o
+ .debug_macro   0x0000000000000f52       0x6a Core/Src/main.o
+ .debug_macro   0x0000000000000fbc      0x1df Core/Src/main.o
+ .debug_macro   0x000000000000119b       0x1c Core/Src/main.o
+ .debug_macro   0x00000000000011b7       0x22 Core/Src/main.o
+ .debug_macro   0x00000000000011d9       0xb5 Core/Src/main.o
+ .debug_macro   0x000000000000128e      0x391 Core/Src/main.o
+ .debug_macro   0x000000000000161f     0x6e60 Core/Src/main.o
+ .debug_macro   0x000000000000847f       0x3c Core/Src/main.o
+ .debug_macro   0x00000000000084bb     0x3461 Core/Src/main.o
+ .debug_macro   0x000000000000b91c      0x174 Core/Src/main.o
+ .debug_macro   0x000000000000ba90       0x55 Core/Src/main.o
+ .debug_macro   0x000000000000bae5      0x924 Core/Src/main.o
+ .debug_macro   0x000000000000c409       0xe5 Core/Src/main.o
+ .debug_macro   0x000000000000c4ee      0x12f Core/Src/main.o
+ .debug_macro   0x000000000000c61d       0xb3 Core/Src/main.o
+ .debug_macro   0x000000000000c6d0      0x1a0 Core/Src/main.o
+ .debug_macro   0x000000000000c870      0x1ed Core/Src/main.o
+ .debug_macro   0x000000000000ca5d       0x34 Core/Src/main.o
+ .debug_macro   0x000000000000ca91       0x43 Core/Src/main.o
+ .debug_macro   0x000000000000cad4       0x28 Core/Src/main.o
+ .debug_macro   0x000000000000cafc       0xb0 Core/Src/main.o
+ .debug_macro   0x000000000000cbac      0x15a Core/Src/main.o
+ .debug_macro   0x000000000000cd06      0x22c Core/Src/main.o
+ .debug_macro   0x000000000000cf32       0x60 Core/Src/main.o
+ .debug_macro   0x000000000000cf92       0xa5 Core/Src/main.o
+ .debug_macro   0x000000000000d037       0x4c Core/Src/main.o
+ .debug_macro   0x000000000000d083       0x2b Core/Src/main.o
+ .debug_macro   0x000000000000d0ae       0xf1 Core/Src/main.o
+ .debug_macro   0x000000000000d19f      0x1a3 Core/Src/stm32f0xx_hal_msp.o
+ .debug_macro   0x000000000000d342      0x1ad Core/Src/stm32f0xx_it.o
+ .debug_macro   0x000000000000d4ef      0x199 Core/Src/system_stm32f0xx.o
+ .debug_macro   0x000000000000d688      0x1bd Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_macro   0x000000000000d845      0x199 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_macro   0x000000000000d9de      0x1d1 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_macro   0x000000000000dbaf      0x1ab Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+
+.debug_line     0x0000000000000000     0x3b56
+ .debug_line    0x0000000000000000      0x694 Core/Src/main.o
+ .debug_line    0x0000000000000694      0x655 Core/Src/stm32f0xx_hal_msp.o
+ .debug_line    0x0000000000000ce9      0x6ad Core/Src/stm32f0xx_it.o
+ .debug_line    0x0000000000001396      0x66f Core/Src/system_stm32f0xx.o
+ .debug_line    0x0000000000001a05       0x89 Core/Startup/startup_stm32f030f4px.o
+ .debug_line    0x0000000000001a8e      0x80b Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_line    0x0000000000002299      0x823 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_line    0x0000000000002abc      0x7ce Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_line    0x000000000000328a      0x8cc Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+
+.debug_str      0x0000000000000000    0x52bb5
+ .debug_str     0x0000000000000000    0x51fbe Core/Src/main.o
+                                      0x5223b (size before relaxing)
+ .debug_str     0x0000000000051fbe       0x86 Core/Src/stm32f0xx_hal_msp.o
+                                      0x520ab (size before relaxing)
+ .debug_str     0x0000000000052044       0x76 Core/Src/stm32f0xx_it.o
+                                      0x5209b (size before relaxing)
+ .debug_str     0x00000000000520ba       0x5f Core/Src/system_stm32f0xx.o
+                                      0x520cd (size before relaxing)
+ .debug_str     0x0000000000052119       0x36 Core/Startup/startup_stm32f030f4px.o
+                                         0x68 (size before relaxing)
+ .debug_str     0x000000000005214f      0x40f Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+                                      0x525a0 (size before relaxing)
+ .debug_str     0x000000000005255e      0x204 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+                                      0x52458 (size before relaxing)
+ .debug_str     0x0000000000052762      0x213 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+                                      0x52369 (size before relaxing)
+ .debug_str     0x0000000000052975      0x240 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+                                      0x524d7 (size before relaxing)
+
+.comment        0x0000000000000000       0x7b
+ .comment       0x0000000000000000       0x7b Core/Src/main.o
+                                         0x7c (size before relaxing)
+ .comment       0x000000000000007b       0x7c Core/Src/stm32f0xx_hal_msp.o
+ .comment       0x000000000000007b       0x7c Core/Src/stm32f0xx_it.o
+ .comment       0x000000000000007b       0x7c Core/Src/system_stm32f0xx.o
+ .comment       0x000000000000007b       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .comment       0x000000000000007b       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .comment       0x000000000000007b       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .comment       0x000000000000007b       0x7c Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+
+.debug_frame    0x0000000000000000      0x9dc
+ .debug_frame   0x0000000000000000       0x6c Core/Src/main.o
+ .debug_frame   0x000000000000006c       0x30 Core/Src/stm32f0xx_hal_msp.o
+ .debug_frame   0x000000000000009c       0x9c Core/Src/stm32f0xx_it.o
+ .debug_frame   0x0000000000000138       0x4c Core/Src/system_stm32f0xx.o
+ .debug_frame   0x0000000000000184      0x2a4 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.o
+ .debug_frame   0x0000000000000428      0x2a0 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.o
+ .debug_frame   0x00000000000006c8      0x110 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.o
+ .debug_frame   0x00000000000007d8      0x198 Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.o
+ .debug_frame   0x0000000000000970       0x2c /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-init.o)
+ .debug_frame   0x000000000000099c       0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/lib/thumb/v6-m/libc_nano.a(lib_a-memset.o)
+ .debug_frame   0x00000000000009bc       0x20 /opt/st/stm32cubeide_1.5.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.5.0.202011040924/tools/bin/../lib/gcc/arm-none-eabi/7.3.1/thumb/v6-m/libgcc.a(_udivsi3.o)
diff --git a/test/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h b/test/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h
new file mode 100644
index 0000000..45ef5d5
--- /dev/null
+++ b/test/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x6.h
@@ -0,0 +1,5359 @@
+/**
+  ******************************************************************************
+  * @file    stm32f030x6.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M0 Device Peripheral Access Layer Header File. 
+  *          This file contains all the peripheral register's definitions, bits 
+  *          definitions and memory mapping for STM32F0xx devices.            
+  *            
+  *          This file contains:
+  *           - Data structures and the address mapping for all peripherals
+  *           - Peripheral's registers declarations and bits definition
+  *           - Macros to access peripheral’s registers hardware
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f030x6
+  * @{
+  */
+    
+#ifndef __STM32F030x6_H
+#define __STM32F030x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+  /** @addtogroup Configuration_section_for_CMSIS
+  * @{
+  */
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV                 0 /*!< Core Revision r0p0                            */
+#define __MPU_PRESENT             0 /*!< STM32F0xx do not provide MPU                  */
+#define __NVIC_PRIO_BITS          2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig    0     /*!< Set to 1 if different SysTick Config is used */
+ 
+/**
+  * @}
+  */
+   
+/** @addtogroup Peripheral_interrupt_number_definition
+  * @{
+  */
+
+/**
+ * @brief STM32F0xx Interrupt Number Definition, according to the selected device 
+ *        in @ref Library_configuration_section 
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
+  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
+  HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
+  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
+  SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
+
+/******  STM32F0 specific Interrupt Numbers ******************************************************************/
+  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                               */
+  RTC_IRQn                    = 2,      /*!< RTC Interrupt through EXTI Lines 17, 19 and 20                  */
+  FLASH_IRQn                  = 3,      /*!< FLASH global Interrupt                                          */
+  RCC_IRQn                    = 4,      /*!< RCC global Interrupt                                            */
+  EXTI0_1_IRQn                = 5,      /*!< EXTI Line 0 and 1 Interrupt                                     */
+  EXTI2_3_IRQn                = 6,      /*!< EXTI Line 2 and 3 Interrupt                                     */
+  EXTI4_15_IRQn               = 7,      /*!< EXTI Line 4 to 15 Interrupt                                     */
+  DMA1_Channel1_IRQn          = 9,      /*!< DMA1 Channel 1 Interrupt                                        */
+  DMA1_Channel2_3_IRQn        = 10,     /*!< DMA1 Channel 2 and Channel 3 Interrupt                          */
+  DMA1_Channel4_5_IRQn        = 11,     /*!< DMA1 Channel 4 and Channel 5 Interrupt                          */
+  ADC1_IRQn                   = 12,     /*!< ADC1 Interrupt                                                  */
+  TIM1_BRK_UP_TRG_COM_IRQn    = 13,     /*!< TIM1 Break, Update, Trigger and Commutation Interrupt           */
+  TIM1_CC_IRQn                = 14,     /*!< TIM1 Capture Compare Interrupt                                  */
+  TIM3_IRQn                   = 16,     /*!< TIM3 global Interrupt                                           */
+  TIM14_IRQn                  = 19,     /*!< TIM14 global Interrupt                                          */
+  TIM16_IRQn                  = 21,     /*!< TIM16 global Interrupt                                          */
+  TIM17_IRQn                  = 22,     /*!< TIM17 global Interrupt                                          */
+  I2C1_IRQn                   = 23,     /*!< I2C1 Event Interrupt                                            */
+  SPI1_IRQn                   = 25,     /*!< SPI1 global Interrupt                                           */
+  USART1_IRQn                 = 27      /*!< USART1 global Interrupt                                         */
+} IRQn_Type;
+
+/**
+  * @}
+  */
+
+#include "core_cm0.h"            /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h"    /* STM32F0xx System Header */
+#include 
+
+/** @addtogroup Peripheral_registers_structures
+  * @{
+  */
+
+/**
+  * @brief Analog to Digital Converter
+  */
+
+typedef struct
+{
+  __IO uint32_t ISR;          /*!< ADC interrupt and status register,             Address offset: 0x00 */
+  __IO uint32_t IER;          /*!< ADC interrupt enable register,                 Address offset: 0x04 */
+  __IO uint32_t CR;           /*!< ADC control register,                          Address offset: 0x08 */
+  __IO uint32_t CFGR1;        /*!< ADC configuration register 1,                  Address offset: 0x0C */
+  __IO uint32_t CFGR2;        /*!< ADC configuration register 2,                  Address offset: 0x10 */
+  __IO uint32_t SMPR;         /*!< ADC sampling time register,                    Address offset: 0x14 */
+       uint32_t RESERVED1;    /*!< Reserved,                                                      0x18 */
+       uint32_t RESERVED2;    /*!< Reserved,                                                      0x1C */
+  __IO uint32_t TR;           /*!< ADC analog watchdog 1 threshold register,      Address offset: 0x20 */
+       uint32_t RESERVED3;    /*!< Reserved,                                                      0x24 */
+  __IO uint32_t CHSELR;       /*!< ADC group regular sequencer register,          Address offset: 0x28 */
+       uint32_t RESERVED4[5]; /*!< Reserved,                                                      0x2C */
+  __IO uint32_t DR;           /*!< ADC group regular data register,               Address offset: 0x40 */
+} ADC_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t CCR;          /*!< ADC common configuration register,             Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/** 
+  * @brief CRC calculation unit
+  */
+
+typedef struct
+{
+  __IO uint32_t DR;          /*!< CRC Data register,                           Address offset: 0x00 */
+  __IO uint8_t  IDR;         /*!< CRC Independent data register,               Address offset: 0x04 */
+  uint8_t       RESERVED0;   /*!< Reserved,                                                    0x05 */
+  uint16_t      RESERVED1;   /*!< Reserved,                                                    0x06 */
+  __IO uint32_t CR;          /*!< CRC Control register,                        Address offset: 0x08 */ 
+  uint32_t      RESERVED2;   /*!< Reserved,                                                    0x0C */
+  __IO uint32_t INIT;        /*!< Initial CRC value register,                  Address offset: 0x10 */
+  __IO uint32_t RESERVED3;   /*!< Reserved,                                                    0x14 */
+} CRC_TypeDef;
+
+/** 
+  * @brief Debug MCU
+  */
+
+typedef struct
+{
+  __IO uint32_t IDCODE;       /*!< MCU device ID code,                          Address offset: 0x00 */
+  __IO uint32_t CR;           /*!< Debug MCU configuration register,            Address offset: 0x04 */
+  __IO uint32_t APB1FZ;       /*!< Debug MCU APB1 freeze register,              Address offset: 0x08 */
+  __IO uint32_t APB2FZ;       /*!< Debug MCU APB2 freeze register,              Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/** 
+  * @brief DMA Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CCR;          /*!< DMA channel x configuration register        */
+  __IO uint32_t CNDTR;        /*!< DMA channel x number of data register       */
+  __IO uint32_t CPAR;         /*!< DMA channel x peripheral address register   */
+  __IO uint32_t CMAR;         /*!< DMA channel x memory address register       */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t ISR;          /*!< DMA interrupt status register,               Address offset: 0x00 */
+  __IO uint32_t IFCR;         /*!< DMA interrupt flag clear register,           Address offset: 0x04 */
+} DMA_TypeDef;
+
+/** 
+  * @brief External Interrupt/Event Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t IMR;          /*!
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f0xx
+  * @{
+  */
+    
+#ifndef __STM32F0xx_H
+#define __STM32F0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+   
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+  
+/**
+  * @brief STM32 Family
+  */
+#if !defined  (STM32F0)
+#define STM32F0
+#endif /* STM32F0 */
+
+/** Uncomment the line below according to the target STM32 device used in your application.
+  * stm32f0xxxx.h file contains:
+  * - All the peripheral register's definitions, bits definitions and memory mapping for STM32F0xxxx devices
+  * - IRQ channel definition
+  * - Peripheral memory mapping and physical registers address definition
+  * - Peripheral pointer declaration and driver header file inclusion
+  * - Product miscellaneous configuration: assert macros…
+  * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family’s superset.
+  */
+
+#if !defined (STM32F030x6) && !defined (STM32F030x8) &&                           \
+    !defined (STM32F031x6) && !defined (STM32F038xx) &&                           \
+    !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
+    !defined (STM32F051x8) && !defined (STM32F058xx) &&                           \
+    !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+    !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
+  /* #define STM32F030x6 */  /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)              */
+  /* #define STM32F030x8 */  /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes)                                              */
+  /* #define STM32F031x6 */  /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)              */
+  /* #define STM32F038xx */  /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes)                                              */
+  /* #define STM32F042x6 */  /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)              */
+  /* #define STM32F048xx */  /*!< STM32F048xx Devices (STM32F048xx microcontrollers where the Flash memory is 32 Kbytes)                                              */
+  /* #define STM32F051x8 */  /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
+  /* #define STM32F058xx */  /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes)                                              */
+  /* #define STM32F070x6 */  /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)                           */
+  /* #define STM32F070xB */  /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes)                          */
+  /* #define STM32F071xB */  /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes)             */
+  /* #define STM32F072xB */  /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes)             */
+  /* #define STM32F078xx */  /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes)                                             */
+  /* #define STM32F030xC */  /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes)                                             */  
+  /* #define STM32F091xC */  /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes)            */
+  /* #define STM32F098xx */  /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes)                                             */
+#endif
+/* Legacy aliases */
+#if defined (STM32F048x6)
+ #define STM32F048xx 
+#endif /* STM32F048x6 */
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V2.3.5
+  */
+#define __STM32F0_DEVICE_VERSION_MAIN   (0x02) /*!< [31:24] main version */
+#define __STM32F0_DEVICE_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
+#define __STM32F0_DEVICE_VERSION_SUB2   (0x05) /*!< [15:8]  sub2 version */
+#define __STM32F0_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F0_DEVICE_VERSION        ((__STM32F0_DEVICE_VERSION_MAIN << 24)\
+                                        |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\
+                                        |(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\
+                                        |(__STM32F0_DEVICE_VERSION_RC))
+                                             
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F030x6)
+  #include "stm32f030x6.h"
+#elif defined(STM32F030x8)
+  #include "stm32f030x8.h"
+#elif defined(STM32F031x6)
+  #include "stm32f031x6.h"
+#elif defined(STM32F038xx)
+  #include "stm32f038xx.h"
+#elif defined(STM32F042x6)
+  #include "stm32f042x6.h"
+#elif defined(STM32F048xx)
+  #include "stm32f048xx.h"
+#elif defined(STM32F051x8)
+  #include "stm32f051x8.h"
+#elif defined(STM32F058xx)
+  #include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+  #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+  #include "stm32f070xb.h"
+#elif defined(STM32F071xB)
+  #include "stm32f071xb.h"
+#elif defined(STM32F072xB)
+  #include "stm32f072xb.h"
+#elif defined(STM32F078xx)
+  #include "stm32f078xx.h"
+#elif defined(STM32F091xC)
+  #include "stm32f091xc.h"
+#elif defined(STM32F098xx)
+  #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+  #include "stm32f030xc.h"    
+#else
+ #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0U, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0U, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F0xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h b/test/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h
new file mode 100644
index 0000000..fafabf4
--- /dev/null
+++ b/test/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h
@@ -0,0 +1,105 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f0xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M0 Device System Source File for STM32F0xx devices.  
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f0xx_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F0XX_H
+#define __SYSTEM_STM32F0XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F0xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F0xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) by calling HAL API function HAL_RCC_ClockConfig()
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t AHBPrescTable[16];   /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8];    /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F0xx_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F0XX_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/CMSIS/Include/cmsis_armcc.h b/test/Drivers/CMSIS/Include/cmsis_armcc.h
new file mode 100644
index 0000000..7d751fb
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/cmsis_armcc.h
@@ -0,0 +1,865 @@
+/**************************************************************************//**
+ * @file     cmsis_armcc.h
+ * @brief    CMSIS compiler ARMCC (Arm Compiler 5) header file
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+  #error "Please use Arm Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* CMSIS compiler control architecture macros */
+#if ((defined (__TARGET_ARCH_6_M  ) && (__TARGET_ARCH_6_M   == 1)) || \
+     (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M  == 1))   )
+  #define __ARM_ARCH_6M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M  == 1))
+  #define __ARM_ARCH_7M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
+  #define __ARM_ARCH_7EM__          1
+#endif
+
+  /* __ARM_ARCH_8M_BASE__  not applicable */
+  /* __ARM_ARCH_8M_MAIN__  not applicable */
+
+
+/* CMSIS compiler specific defines */
+#ifndef   __ASM
+  #define __ASM                                  __asm
+#endif
+#ifndef   __INLINE
+  #define __INLINE                               __inline
+#endif
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE                        static __inline
+#endif
+#ifndef   __STATIC_FORCEINLINE                 
+  #define __STATIC_FORCEINLINE                   static __forceinline
+#endif           
+#ifndef   __NO_RETURN
+  #define __NO_RETURN                            __declspec(noreturn)
+#endif
+#ifndef   __USED
+  #define __USED                                 __attribute__((used))
+#endif
+#ifndef   __WEAK
+  #define __WEAK                                 __attribute__((weak))
+#endif
+#ifndef   __PACKED
+  #define __PACKED                               __attribute__((packed))
+#endif
+#ifndef   __PACKED_STRUCT
+  #define __PACKED_STRUCT                        __packed struct
+#endif
+#ifndef   __PACKED_UNION
+  #define __PACKED_UNION                         __packed union
+#endif
+#ifndef   __UNALIGNED_UINT32        /* deprecated */
+  #define __UNALIGNED_UINT32(x)                  (*((__packed uint32_t *)(x)))
+#endif
+#ifndef   __UNALIGNED_UINT16_WRITE
+  #define __UNALIGNED_UINT16_WRITE(addr, val)    ((*((__packed uint16_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT16_READ
+  #define __UNALIGNED_UINT16_READ(addr)          (*((const __packed uint16_t *)(addr)))
+#endif
+#ifndef   __UNALIGNED_UINT32_WRITE
+  #define __UNALIGNED_UINT32_WRITE(addr, val)    ((*((__packed uint32_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT32_READ
+  #define __UNALIGNED_UINT32_READ(addr)          (*((const __packed uint32_t *)(addr)))
+#endif
+#ifndef   __ALIGNED
+  #define __ALIGNED(x)                           __attribute__((aligned(x)))
+#endif
+#ifndef   __RESTRICT
+  #define __RESTRICT                             __restrict
+#endif
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+/**
+  \brief   Enable IRQ Interrupts
+  \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __enable_irq();     */
+
+
+/**
+  \brief   Disable IRQ Interrupts
+  \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __disable_irq();    */
+
+/**
+  \brief   Get Control Register
+  \details Returns the content of the Control Register.
+  \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/**
+  \brief   Set Control Register
+  \details Writes the given value to the Control Register.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/**
+  \brief   Get IPSR Register
+  \details Returns the content of the IPSR Register.
+  \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/**
+  \brief   Get APSR Register
+  \details Returns the content of the APSR Register.
+  \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/**
+  \brief   Get xPSR Register
+  \details Returns the content of the xPSR Register.
+  \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/**
+  \brief   Get Process Stack Pointer
+  \details Returns the current value of the Process Stack Pointer (PSP).
+  \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/**
+  \brief   Set Process Stack Pointer
+  \details Assigns the given value to the Process Stack Pointer (PSP).
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+  \brief   Get Main Stack Pointer
+  \details Returns the current value of the Main Stack Pointer (MSP).
+  \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/**
+  \brief   Set Main Stack Pointer
+  \details Assigns the given value to the Main Stack Pointer (MSP).
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+  \brief   Get Priority Mask
+  \details Returns the current state of the priority mask bit from the Priority Mask Register.
+  \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/**
+  \brief   Set Priority Mask
+  \details Assigns the given value to the Priority Mask Register.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+/**
+  \brief   Enable FIQ
+  \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/**
+  \brief   Disable FIQ
+  \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/**
+  \brief   Get Base Priority
+  \details Returns the current value of the Base Priority register.
+  \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/**
+  \brief   Set Base Priority
+  \details Assigns the given value to the Base Priority register.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Set Base Priority with condition
+  \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+           or the new value increases the BASEPRI priority level.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  register uint32_t __regBasePriMax      __ASM("basepri_max");
+  __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Get Fault Mask
+  \details Returns the current value of the Fault Mask register.
+  \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/**
+  \brief   Set Fault Mask
+  \details Assigns the given value to the Fault Mask register.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1U);
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+
+/**
+  \brief   Get FPSCR
+  \details Returns the current value of the Floating Point Status/Control register.
+  \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0U);
+#endif
+}
+
+
+/**
+  \brief   Set FPSCR
+  \details Assigns the given value to the Floating Point Status/Control register.
+  \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#else
+  (void)fpscr;
+#endif
+}
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/**
+  \brief   No Operation
+  \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/**
+  \brief   Wait For Interrupt
+  \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/**
+  \brief   Wait For Event
+  \details Wait For Event is a hint instruction that permits the processor to enter
+           a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/**
+  \brief   Send Event
+  \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/**
+  \brief   Instruction Synchronization Barrier
+  \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+           so that all instructions following the ISB are fetched from cache or memory,
+           after the instruction has been completed.
+ */
+#define __ISB() do {\
+                   __schedule_barrier();\
+                   __isb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Synchronization Barrier
+  \details Acts as a special kind of Data Memory Barrier.
+           It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+                   __schedule_barrier();\
+                   __dsb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Memory Barrier
+  \details Ensures the apparent order of the explicit memory operations before
+           and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+                   __schedule_barrier();\
+                   __dmb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+                  
+/**
+  \brief   Reverse byte order (32 bit)
+  \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   Rotate Right in unsigned value (32 bit)
+  \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+  \param [in]    op1  Value to rotate
+  \param [in]    op2  Number of Bits to rotate
+  \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/**
+  \brief   Breakpoint
+  \details Causes the processor to enter Debug state.
+           Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+  \param [in]    value  is ignored by the processor.
+                 If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+/**
+  \brief   Reverse bit order of value
+  \details Reverses the bit order of the given value.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+  #define __RBIT                          __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+  uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
+
+  result = value;                      /* r will be reversed bits of v; first get LSB of v */
+  for (value >>= 1U; value != 0U; value >>= 1U)
+  {
+    result <<= 1U;
+    result |= value & 1U;
+    s--;
+  }
+  result <<= s;                        /* shift when v's highest bits are zero */
+  return result;
+}
+#endif
+
+
+/**
+  \brief   Count leading zeros
+  \details Counts the number of leading zeros of a data value.
+  \param [in]  value  Value to count the leading zeros
+  \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+/**
+  \brief   LDR Exclusive (8 bit)
+  \details Executes a exclusive LDR instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXB(ptr)                                                        ((uint8_t ) __ldrex(ptr))
+#else
+  #define __LDREXB(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (16 bit)
+  \details Executes a exclusive LDR instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXH(ptr)                                                        ((uint16_t) __ldrex(ptr))
+#else
+  #define __LDREXH(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (32 bit)
+  \details Executes a exclusive LDR instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXW(ptr)                                                        ((uint32_t ) __ldrex(ptr))
+#else
+  #define __LDREXW(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (8 bit)
+  \details Executes a exclusive STR instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXB(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXB(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (16 bit)
+  \details Executes a exclusive STR instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXH(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXH(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (32 bit)
+  \details Executes a exclusive STR instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXW(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXW(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   Remove the exclusive lock
+  \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX                           __clrex
+
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/**
+  \brief   Rotate Right with Extend (32 bit)
+  \details Moves each bit of a bitstring right by one bit.
+           The carry input is shifted in at the left end of the bitstring.
+  \param [in]    value  Value to rotate
+  \return               Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+  rrx r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   LDRT Unprivileged (8 bit)
+  \details Executes a Unprivileged LDRT instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr)                      ((uint8_t )  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (16 bit)
+  \details Executes a Unprivileged LDRT instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr)                      ((uint16_t)  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (32 bit)
+  \details Executes a Unprivileged LDRT instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr)                       ((uint32_t ) __ldrt(ptr))
+
+
+/**
+  \brief   STRT Unprivileged (8 bit)
+  \details Executes a Unprivileged STRT instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRBT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (16 bit)
+  \details Executes a Unprivileged STRT instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRHT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (32 bit)
+  \details Executes a Unprivileged STRT instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRT(value, ptr)                __strt(value, ptr)
+
+#else  /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+{
+  if ((sat >= 1U) && (sat <= 32U))
+  {
+    const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+    const int32_t min = -1 - max ;
+    if (val > max)
+    {
+      return max;
+    }
+    else if (val < min)
+    {
+      return min;
+    }
+  }
+  return val;
+}
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+{
+  if (sat <= 31U)
+  {
+    const uint32_t max = ((1U << sat) - 1U);
+    if (val > (int32_t)max)
+    {
+      return max;
+    }
+    else if (val < 0)
+    {
+      return 0U;
+    }
+  }
+  return (uint32_t)val;
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32U)     ) >> 32U))
+
+#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */
diff --git a/test/Drivers/CMSIS/Include/cmsis_armclang.h b/test/Drivers/CMSIS/Include/cmsis_armclang.h
new file mode 100644
index 0000000..d8031b0
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/cmsis_armclang.h
@@ -0,0 +1,1869 @@
+/**************************************************************************//**
+ * @file     cmsis_armclang.h
+ * @brief    CMSIS compiler armclang (Arm Compiler 6) header file
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */
+
+#ifndef __CMSIS_ARMCLANG_H
+#define __CMSIS_ARMCLANG_H
+
+#pragma clang system_header   /* treat file as system include file */
+
+#ifndef __ARM_COMPAT_H
+#include     /* Compatibility header for Arm Compiler 5 intrinsics */
+#endif
+
+/* CMSIS compiler specific defines */
+#ifndef   __ASM
+  #define __ASM                                  __asm
+#endif
+#ifndef   __INLINE
+  #define __INLINE                               __inline
+#endif
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE                        static __inline
+#endif
+#ifndef   __STATIC_FORCEINLINE                 
+  #define __STATIC_FORCEINLINE                   __attribute__((always_inline)) static __inline
+#endif                                           
+#ifndef   __NO_RETURN
+  #define __NO_RETURN                            __attribute__((__noreturn__))
+#endif
+#ifndef   __USED
+  #define __USED                                 __attribute__((used))
+#endif
+#ifndef   __WEAK
+  #define __WEAK                                 __attribute__((weak))
+#endif
+#ifndef   __PACKED
+  #define __PACKED                               __attribute__((packed, aligned(1)))
+#endif
+#ifndef   __PACKED_STRUCT
+  #define __PACKED_STRUCT                        struct __attribute__((packed, aligned(1)))
+#endif
+#ifndef   __PACKED_UNION
+  #define __PACKED_UNION                         union __attribute__((packed, aligned(1)))
+#endif
+#ifndef   __UNALIGNED_UINT32        /* deprecated */
+  #pragma clang diagnostic push
+  #pragma clang diagnostic ignored "-Wpacked"
+/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */
+  struct __attribute__((packed)) T_UINT32 { uint32_t v; };
+  #pragma clang diagnostic pop
+  #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+#endif
+#ifndef   __UNALIGNED_UINT16_WRITE
+  #pragma clang diagnostic push
+  #pragma clang diagnostic ignored "-Wpacked"
+/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */
+  __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+  #pragma clang diagnostic pop
+  #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT16_READ
+  #pragma clang diagnostic push
+  #pragma clang diagnostic ignored "-Wpacked"
+/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */
+  __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+  #pragma clang diagnostic pop
+  #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+#endif
+#ifndef   __UNALIGNED_UINT32_WRITE
+  #pragma clang diagnostic push
+  #pragma clang diagnostic ignored "-Wpacked"
+/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */
+  __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+  #pragma clang diagnostic pop
+  #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT32_READ
+  #pragma clang diagnostic push
+  #pragma clang diagnostic ignored "-Wpacked"
+/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */
+  __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+  #pragma clang diagnostic pop
+  #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+#endif
+#ifndef   __ALIGNED
+  #define __ALIGNED(x)                           __attribute__((aligned(x)))
+#endif
+#ifndef   __RESTRICT
+  #define __RESTRICT                             __restrict
+#endif
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+/**
+  \brief   Enable IRQ Interrupts
+  \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __enable_irq();  see arm_compat.h */
+
+
+/**
+  \brief   Disable IRQ Interrupts
+  \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __disable_irq();  see arm_compat.h */
+
+
+/**
+  \brief   Get Control Register
+  \details Returns the content of the Control Register.
+  \return               Control Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_CONTROL(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Control Register (non-secure)
+  \details Returns the content of the non-secure Control Register when in secure mode.
+  \return               non-secure Control Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Control Register
+  \details Writes the given value to the Control Register.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Control Register (non-secure)
+  \details Writes the given value to the non-secure Control Register when in secure state.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control)
+{
+  __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
+}
+#endif
+
+
+/**
+  \brief   Get IPSR Register
+  \details Returns the content of the IPSR Register.
+  \return               IPSR Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_IPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Get APSR Register
+  \details Returns the content of the APSR Register.
+  \return               APSR Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_APSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Get xPSR Register
+  \details Returns the content of the xPSR Register.
+  \return               xPSR Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_xPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Get Process Stack Pointer
+  \details Returns the current value of the Process Stack Pointer (PSP).
+  \return               PSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_PSP(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, psp"  : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Process Stack Pointer (non-secure)
+  \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
+  \return               PSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, psp_ns"  : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Process Stack Pointer
+  \details Assigns the given value to the Process Stack Pointer (PSP).
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : );
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Process Stack Pointer (non-secure)
+  \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : );
+}
+#endif
+
+
+/**
+  \brief   Get Main Stack Pointer
+  \details Returns the current value of the Main Stack Pointer (MSP).
+  \return               MSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_MSP(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, msp" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Main Stack Pointer (non-secure)
+  \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
+  \return               MSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Main Stack Pointer
+  \details Assigns the given value to the Main Stack Pointer (MSP).
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : );
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Main Stack Pointer (non-secure)
+  \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : );
+}
+#endif
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Stack Pointer (non-secure)
+  \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state.
+  \return               SP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, sp_ns" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Set Stack Pointer (non-secure)
+  \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state.
+  \param [in]    topOfStack  Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack)
+{
+  __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : );
+}
+#endif
+
+
+/**
+  \brief   Get Priority Mask
+  \details Returns the current state of the priority mask bit from the Priority Mask Register.
+  \return               Priority Mask value
+ */
+__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Priority Mask (non-secure)
+  \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
+  \return               Priority Mask value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Priority Mask
+  \details Assigns the given value to the Priority Mask Register.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Priority Mask (non-secure)
+  \details Assigns the given value to the non-secure Priority Mask Register when in secure state.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
+}
+#endif
+
+
+#if ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+     (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+     (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    )
+/**
+  \brief   Enable FIQ
+  \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq   /* see arm_compat.h */
+
+
+/**
+  \brief   Disable FIQ
+  \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq   /* see arm_compat.h */
+
+
+/**
+  \brief   Get Base Priority
+  \details Returns the current value of the Base Priority register.
+  \return               Base Priority register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Base Priority (non-secure)
+  \details Returns the current value of the non-secure Base Priority register when in secure state.
+  \return               Base Priority register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Base Priority
+  \details Assigns the given value to the Base Priority register.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Base Priority (non-secure)
+  \details Assigns the given value to the non-secure Base Priority register when in secure state.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri)
+{
+  __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory");
+}
+#endif
+
+
+/**
+  \brief   Set Base Priority with condition
+  \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+           or the new value increases the BASEPRI priority level.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory");
+}
+
+
+/**
+  \brief   Get Fault Mask
+  \details Returns the current value of the Fault Mask register.
+  \return               Fault Mask register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Fault Mask (non-secure)
+  \details Returns the current value of the non-secure Fault Mask register when in secure state.
+  \return               Fault Mask register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Fault Mask
+  \details Assigns the given value to the Fault Mask register.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Fault Mask (non-secure)
+  \details Assigns the given value to the non-secure Fault Mask register when in secure state.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
+}
+#endif
+
+#endif /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    ) */
+
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+/**
+  \brief   Get Process Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always in non-secure
+  mode.
+  
+  \details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
+  \return               PSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, psplim"  : "=r" (result) );
+  return result;
+#endif
+}
+
+#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Process Stack Pointer Limit (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always in non-secure
+  mode.
+
+  \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+  \return               PSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure PSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, psplim_ns"  : "=r" (result) );
+  return result;
+#endif
+}
+#endif
+
+
+/**
+  \brief   Set Process Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored in non-secure
+  mode.
+  
+  \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
+  \param [in]    ProcStackPtrLimit  Process Stack Pointer Limit value to set
+ */
+__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+  // without main extensions, the non-secure PSPLIM is RAZ/WI
+  (void)ProcStackPtrLimit;
+#else
+  __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
+#endif
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE  ) && (__ARM_FEATURE_CMSE   == 3))
+/**
+  \brief   Set Process Stack Pointer (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored in non-secure
+  mode.
+
+  \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+  \param [in]    ProcStackPtrLimit  Process Stack Pointer Limit value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure PSPLIM is RAZ/WI
+  (void)ProcStackPtrLimit;
+#else
+  __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
+#endif
+}
+#endif
+
+
+/**
+  \brief   Get Main Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always.
+
+  \details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
+  \return               MSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, msplim" : "=r" (result) );
+  return result;
+#endif
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE  ) && (__ARM_FEATURE_CMSE   == 3))
+/**
+  \brief   Get Main Stack Pointer Limit (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always.
+
+  \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
+  \return               MSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
+  return result;
+#endif
+}
+#endif
+
+
+/**
+  \brief   Set Main Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored.
+
+  \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
+  \param [in]    MainStackPtrLimit  Main Stack Pointer Limit value to set
+ */
+__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  (void)MainStackPtrLimit;
+#else
+  __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
+#endif
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE  ) && (__ARM_FEATURE_CMSE   == 3))
+/**
+  \brief   Set Main Stack Pointer Limit (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored.
+
+  \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
+  \param [in]    MainStackPtrLimit  Main Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  (void)MainStackPtrLimit;
+#else
+  __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
+#endif
+}
+#endif
+
+#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+           (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    ) */
+
+/**
+  \brief   Get FPSCR
+  \details Returns the current value of the Floating Point Status/Control register.
+  \return               Floating Point Status/Control register value
+ */
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+#define __get_FPSCR      (uint32_t)__builtin_arm_get_fpscr
+#else
+#define __get_FPSCR()      ((uint32_t)0U)
+#endif
+
+/**
+  \brief   Set FPSCR
+  \details Assigns the given value to the Floating Point Status/Control register.
+  \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+#define __set_FPSCR      __builtin_arm_set_fpscr
+#else
+#define __set_FPSCR(x)      ((void)(x))
+#endif
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+  \brief   No Operation
+  \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP          __builtin_arm_nop
+
+/**
+  \brief   Wait For Interrupt
+  \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI          __builtin_arm_wfi
+
+
+/**
+  \brief   Wait For Event
+  \details Wait For Event is a hint instruction that permits the processor to enter
+           a low-power state until one of a number of events occurs.
+ */
+#define __WFE          __builtin_arm_wfe
+
+
+/**
+  \brief   Send Event
+  \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV          __builtin_arm_sev
+
+
+/**
+  \brief   Instruction Synchronization Barrier
+  \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+           so that all instructions following the ISB are fetched from cache or memory,
+           after the instruction has been completed.
+ */
+#define __ISB()        __builtin_arm_isb(0xF);
+
+/**
+  \brief   Data Synchronization Barrier
+  \details Acts as a special kind of Data Memory Barrier.
+           It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB()        __builtin_arm_dsb(0xF);
+
+
+/**
+  \brief   Data Memory Barrier
+  \details Ensures the apparent order of the explicit memory operations before
+           and after the instruction, without ensuring their completion.
+ */
+#define __DMB()        __builtin_arm_dmb(0xF);
+
+
+/**
+  \brief   Reverse byte order (32 bit)
+  \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __REV(value)   __builtin_bswap32(value)
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __REV16(value) __ROR(__REV(value), 16)
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __REVSH(value) (int16_t)__builtin_bswap16(value)
+
+
+/**
+  \brief   Rotate Right in unsigned value (32 bit)
+  \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+  \param [in]    op1  Value to rotate
+  \param [in]    op2  Number of Bits to rotate
+  \return               Rotated value
+ */
+__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+  op2 %= 32U;
+  if (op2 == 0U)
+  {
+    return op1;
+  }
+  return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+  \brief   Breakpoint
+  \details Causes the processor to enter Debug state.
+           Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+  \param [in]    value  is ignored by the processor.
+                 If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)     __ASM volatile ("bkpt "#value)
+
+
+/**
+  \brief   Reverse bit order of value
+  \details Reverses the bit order of the given value.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __RBIT            __builtin_arm_rbit
+
+/**
+  \brief   Count leading zeros
+  \details Counts the number of leading zeros of a data value.
+  \param [in]  value  Value to count the leading zeros
+  \return             number of leading zeros in value
+ */
+#define __CLZ             (uint8_t)__builtin_clz
+
+
+#if ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+     (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+     (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+/**
+  \brief   LDR Exclusive (8 bit)
+  \details Executes a exclusive LDR instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#define __LDREXB        (uint8_t)__builtin_arm_ldrex
+
+
+/**
+  \brief   LDR Exclusive (16 bit)
+  \details Executes a exclusive LDR instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#define __LDREXH        (uint16_t)__builtin_arm_ldrex
+
+
+/**
+  \brief   LDR Exclusive (32 bit)
+  \details Executes a exclusive LDR instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#define __LDREXW        (uint32_t)__builtin_arm_ldrex
+
+
+/**
+  \brief   STR Exclusive (8 bit)
+  \details Executes a exclusive STR instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#define __STREXB        (uint32_t)__builtin_arm_strex
+
+
+/**
+  \brief   STR Exclusive (16 bit)
+  \details Executes a exclusive STR instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#define __STREXH        (uint32_t)__builtin_arm_strex
+
+
+/**
+  \brief   STR Exclusive (32 bit)
+  \details Executes a exclusive STR instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#define __STREXW        (uint32_t)__builtin_arm_strex
+
+
+/**
+  \brief   Remove the exclusive lock
+  \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX             __builtin_arm_clrex
+
+#endif /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+           (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    ) */
+
+
+#if ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+     (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+     (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    )
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+#define __SSAT             __builtin_arm_ssat
+
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+#define __USAT             __builtin_arm_usat
+
+
+/**
+  \brief   Rotate Right with Extend (32 bit)
+  \details Moves each bit of a bitstring right by one bit.
+           The carry input is shifted in at the left end of the bitstring.
+  \param [in]    value  Value to rotate
+  \return               Rotated value
+ */
+__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/**
+  \brief   LDRT Unprivileged (8 bit)
+  \details Executes a Unprivileged LDRT instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr)
+{
+  uint32_t result;
+
+  __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
+  return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/**
+  \brief   LDRT Unprivileged (16 bit)
+  \details Executes a Unprivileged LDRT instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr)
+{
+  uint32_t result;
+
+  __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
+  return ((uint16_t) result);    /* Add explicit type cast here */
+}
+
+
+/**
+  \brief   LDRT Unprivileged (32 bit)
+  \details Executes a Unprivileged LDRT instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr)
+{
+  uint32_t result;
+
+  __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
+  return(result);
+}
+
+
+/**
+  \brief   STRT Unprivileged (8 bit)
+  \details Executes a Unprivileged STRT instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
+{
+  __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   STRT Unprivileged (16 bit)
+  \details Executes a Unprivileged STRT instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
+{
+  __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   STRT Unprivileged (32 bit)
+  \details Executes a Unprivileged STRT instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
+{
+  __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
+}
+
+#else  /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    ) */
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat)
+{
+  if ((sat >= 1U) && (sat <= 32U))
+  {
+    const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+    const int32_t min = -1 - max ;
+    if (val > max)
+    {
+      return max;
+    }
+    else if (val < min)
+    {
+      return min;
+    }
+  }
+  return val;
+}
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat)
+{
+  if (sat <= 31U)
+  {
+    const uint32_t max = ((1U << sat) - 1U);
+    if (val > (int32_t)max)
+    {
+      return max;
+    }
+    else if (val < 0)
+    {
+      return 0U;
+    }
+  }
+  return (uint32_t)val;
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    ) */
+
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+/**
+  \brief   Load-Acquire (8 bit)
+  \details Executes a LDAB instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr)
+{
+  uint32_t result;
+
+  __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
+  return ((uint8_t) result);
+}
+
+
+/**
+  \brief   Load-Acquire (16 bit)
+  \details Executes a LDAH instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr)
+{
+  uint32_t result;
+
+  __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
+  return ((uint16_t) result);
+}
+
+
+/**
+  \brief   Load-Acquire (32 bit)
+  \details Executes a LDA instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr)
+{
+  uint32_t result;
+
+  __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
+  return(result);
+}
+
+
+/**
+  \brief   Store-Release (8 bit)
+  \details Executes a STLB instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
+{
+  __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   Store-Release (16 bit)
+  \details Executes a STLH instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
+{
+  __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   Store-Release (32 bit)
+  \details Executes a STL instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr)
+{
+  __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   Load-Acquire Exclusive (8 bit)
+  \details Executes a LDAB exclusive instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#define     __LDAEXB                 (uint8_t)__builtin_arm_ldaex
+
+
+/**
+  \brief   Load-Acquire Exclusive (16 bit)
+  \details Executes a LDAH exclusive instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#define     __LDAEXH                 (uint16_t)__builtin_arm_ldaex
+
+
+/**
+  \brief   Load-Acquire Exclusive (32 bit)
+  \details Executes a LDA exclusive instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#define     __LDAEX                  (uint32_t)__builtin_arm_ldaex
+
+
+/**
+  \brief   Store-Release Exclusive (8 bit)
+  \details Executes a STLB exclusive instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#define     __STLEXB                 (uint32_t)__builtin_arm_stlex
+
+
+/**
+  \brief   Store-Release Exclusive (16 bit)
+  \details Executes a STLH exclusive instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#define     __STLEXH                 (uint32_t)__builtin_arm_stlex
+
+
+/**
+  \brief   Store-Release Exclusive (32 bit)
+  \details Executes a STL exclusive instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#define     __STLEX                  (uint32_t)__builtin_arm_stlex
+
+#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+           (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    ) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1))
+
+__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({                          \
+  int32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUAD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUSD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint32_t __SEL  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE  int32_t __QADD( int32_t op1,  int32_t op2)
+{
+  int32_t result;
+
+  __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE  int32_t __QSUB( int32_t op1,  int32_t op2)
+{
+  int32_t result;
+
+  __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+#if 0
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  if (ARG3 == 0) \
+    __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2)  ); \
+  else \
+    __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+#endif
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+  int32_t result;
+
+  __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r"  (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#endif /* (__ARM_FEATURE_DSP == 1) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCLANG_H */
diff --git a/test/Drivers/CMSIS/Include/cmsis_compiler.h b/test/Drivers/CMSIS/Include/cmsis_compiler.h
new file mode 100644
index 0000000..79a2cac
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/cmsis_compiler.h
@@ -0,0 +1,266 @@
+/**************************************************************************//**
+ * @file     cmsis_compiler.h
+ * @brief    CMSIS compiler generic header file
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_COMPILER_H
+#define __CMSIS_COMPILER_H
+
+#include 
+
+/*
+ * Arm Compiler 4/5
+ */
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+
+/*
+ * Arm Compiler 6 (armclang)
+ */
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armclang.h"
+
+
+/*
+ * GNU Compiler
+ */
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+
+/*
+ * IAR Compiler
+ */
+#elif defined ( __ICCARM__ )
+  #include 
+
+
+/*
+ * TI Arm Compiler
+ */
+#elif defined ( __TI_ARM__ )
+  #include 
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __attribute__((packed))
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __attribute__((packed)) T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)                           __attribute__((aligned(x)))
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+/*
+ * TASKING Compiler
+ */
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __packed__
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __packed__
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __packed__
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __packed__ T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)              __align(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+/*
+ * COSMIC Compiler
+ */
+#elif defined ( __CSMC__ )
+   #include 
+
+ #ifndef   __ASM
+    #define __ASM                                  _asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    // NO RETURN is automatically detected hence no warning here
+    #define __NO_RETURN
+  #endif
+  #ifndef   __USED
+    #warning No compiler specific solution for __USED. __USED is ignored.
+    #define __USED
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __weak
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               @packed
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        @packed struct
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         @packed union
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    @packed struct T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+#else
+  #error Unknown compiler.
+#endif
+
+
+#endif /* __CMSIS_COMPILER_H */
+
diff --git a/test/Drivers/CMSIS/Include/cmsis_gcc.h b/test/Drivers/CMSIS/Include/cmsis_gcc.h
new file mode 100644
index 0000000..1bd41a4
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/cmsis_gcc.h
@@ -0,0 +1,2085 @@
+/**************************************************************************//**
+ * @file     cmsis_gcc.h
+ * @brief    CMSIS compiler GCC header file
+ * @version  V5.0.4
+ * @date     09. April 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_GCC_H
+#define __CMSIS_GCC_H
+
+/* ignore some GCC warnings */
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+
+/* Fallback for __has_builtin */
+#ifndef __has_builtin
+  #define __has_builtin(x) (0)
+#endif
+
+/* CMSIS compiler specific defines */
+#ifndef   __ASM
+  #define __ASM                                  __asm
+#endif
+#ifndef   __INLINE
+  #define __INLINE                               inline
+#endif
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE                        static inline
+#endif
+#ifndef   __STATIC_FORCEINLINE                 
+  #define __STATIC_FORCEINLINE                   __attribute__((always_inline)) static inline
+#endif                                           
+#ifndef   __NO_RETURN
+  #define __NO_RETURN                            __attribute__((__noreturn__))
+#endif
+#ifndef   __USED
+  #define __USED                                 __attribute__((used))
+#endif
+#ifndef   __WEAK
+  #define __WEAK                                 __attribute__((weak))
+#endif
+#ifndef   __PACKED
+  #define __PACKED                               __attribute__((packed, aligned(1)))
+#endif
+#ifndef   __PACKED_STRUCT
+  #define __PACKED_STRUCT                        struct __attribute__((packed, aligned(1)))
+#endif
+#ifndef   __PACKED_UNION
+  #define __PACKED_UNION                         union __attribute__((packed, aligned(1)))
+#endif
+#ifndef   __UNALIGNED_UINT32        /* deprecated */
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wpacked"
+  #pragma GCC diagnostic ignored "-Wattributes"
+  struct __attribute__((packed)) T_UINT32 { uint32_t v; };
+  #pragma GCC diagnostic pop
+  #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+#endif
+#ifndef   __UNALIGNED_UINT16_WRITE
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wpacked"
+  #pragma GCC diagnostic ignored "-Wattributes"
+  __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+  #pragma GCC diagnostic pop
+  #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT16_READ
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wpacked"
+  #pragma GCC diagnostic ignored "-Wattributes"
+  __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+  #pragma GCC diagnostic pop
+  #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+#endif
+#ifndef   __UNALIGNED_UINT32_WRITE
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wpacked"
+  #pragma GCC diagnostic ignored "-Wattributes"
+  __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+  #pragma GCC diagnostic pop
+  #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT32_READ
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wpacked"
+  #pragma GCC diagnostic ignored "-Wattributes"
+  __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+  #pragma GCC diagnostic pop
+  #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+#endif
+#ifndef   __ALIGNED
+  #define __ALIGNED(x)                           __attribute__((aligned(x)))
+#endif
+#ifndef   __RESTRICT
+  #define __RESTRICT                             __restrict
+#endif
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+/**
+  \brief   Enable IRQ Interrupts
+  \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+__STATIC_FORCEINLINE void __enable_irq(void)
+{
+  __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+  \brief   Disable IRQ Interrupts
+  \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+__STATIC_FORCEINLINE void __disable_irq(void)
+{
+  __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+  \brief   Get Control Register
+  \details Returns the content of the Control Register.
+  \return               Control Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_CONTROL(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Control Register (non-secure)
+  \details Returns the content of the non-secure Control Register when in secure mode.
+  \return               non-secure Control Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Control Register
+  \details Writes the given value to the Control Register.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Control Register (non-secure)
+  \details Writes the given value to the non-secure Control Register when in secure state.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control)
+{
+  __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
+}
+#endif
+
+
+/**
+  \brief   Get IPSR Register
+  \details Returns the content of the IPSR Register.
+  \return               IPSR Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_IPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Get APSR Register
+  \details Returns the content of the APSR Register.
+  \return               APSR Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_APSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Get xPSR Register
+  \details Returns the content of the xPSR Register.
+  \return               xPSR Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_xPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Get Process Stack Pointer
+  \details Returns the current value of the Process Stack Pointer (PSP).
+  \return               PSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_PSP(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, psp"  : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Process Stack Pointer (non-secure)
+  \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
+  \return               PSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, psp_ns"  : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Process Stack Pointer
+  \details Assigns the given value to the Process Stack Pointer (PSP).
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : );
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Process Stack Pointer (non-secure)
+  \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : );
+}
+#endif
+
+
+/**
+  \brief   Get Main Stack Pointer
+  \details Returns the current value of the Main Stack Pointer (MSP).
+  \return               MSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_MSP(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, msp" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Main Stack Pointer (non-secure)
+  \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
+  \return               MSP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Main Stack Pointer
+  \details Assigns the given value to the Main Stack Pointer (MSP).
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : );
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Main Stack Pointer (non-secure)
+  \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : );
+}
+#endif
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Stack Pointer (non-secure)
+  \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state.
+  \return               SP Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, sp_ns" : "=r" (result) );
+  return(result);
+}
+
+
+/**
+  \brief   Set Stack Pointer (non-secure)
+  \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state.
+  \param [in]    topOfStack  Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack)
+{
+  __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : );
+}
+#endif
+
+
+/**
+  \brief   Get Priority Mask
+  \details Returns the current state of the priority mask bit from the Priority Mask Register.
+  \return               Priority Mask value
+ */
+__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory");
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Priority Mask (non-secure)
+  \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
+  \return               Priority Mask value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory");
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Priority Mask
+  \details Assigns the given value to the Priority Mask Register.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Priority Mask (non-secure)
+  \details Assigns the given value to the non-secure Priority Mask Register when in secure state.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
+}
+#endif
+
+
+#if ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+     (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+     (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    )
+/**
+  \brief   Enable FIQ
+  \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+__STATIC_FORCEINLINE void __enable_fault_irq(void)
+{
+  __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+  \brief   Disable FIQ
+  \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+__STATIC_FORCEINLINE void __disable_fault_irq(void)
+{
+  __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+  \brief   Get Base Priority
+  \details Returns the current value of the Base Priority register.
+  \return               Base Priority register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Base Priority (non-secure)
+  \details Returns the current value of the non-secure Base Priority register when in secure state.
+  \return               Base Priority register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Base Priority
+  \details Assigns the given value to the Base Priority register.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Base Priority (non-secure)
+  \details Assigns the given value to the non-secure Base Priority register when in secure state.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri)
+{
+  __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory");
+}
+#endif
+
+
+/**
+  \brief   Set Base Priority with condition
+  \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+           or the new value increases the BASEPRI priority level.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory");
+}
+
+
+/**
+  \brief   Get Fault Mask
+  \details Returns the current value of the Fault Mask register.
+  \return               Fault Mask register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Fault Mask (non-secure)
+  \details Returns the current value of the non-secure Fault Mask register when in secure state.
+  \return               Fault Mask register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Set Fault Mask
+  \details Assigns the given value to the Fault Mask register.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Set Fault Mask (non-secure)
+  \details Assigns the given value to the non-secure Fault Mask register when in secure state.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
+}
+#endif
+
+#endif /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    ) */
+
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+/**
+  \brief   Get Process Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always in non-secure
+  mode.
+  
+  \details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
+  \return               PSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, psplim"  : "=r" (result) );
+  return result;
+#endif
+}
+
+#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3))
+/**
+  \brief   Get Process Stack Pointer Limit (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always.
+
+  \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+  \return               PSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure PSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, psplim_ns"  : "=r" (result) );
+  return result;
+#endif
+}
+#endif
+
+
+/**
+  \brief   Set Process Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored in non-secure
+  mode.
+  
+  \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
+  \param [in]    ProcStackPtrLimit  Process Stack Pointer Limit value to set
+ */
+__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+  // without main extensions, the non-secure PSPLIM is RAZ/WI
+  (void)ProcStackPtrLimit;
+#else
+  __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
+#endif
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE  ) && (__ARM_FEATURE_CMSE   == 3))
+/**
+  \brief   Set Process Stack Pointer (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored.
+
+  \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+  \param [in]    ProcStackPtrLimit  Process Stack Pointer Limit value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure PSPLIM is RAZ/WI
+  (void)ProcStackPtrLimit;
+#else
+  __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
+#endif
+}
+#endif
+
+
+/**
+  \brief   Get Main Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always in non-secure
+  mode.
+
+  \details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
+  \return               MSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, msplim" : "=r" (result) );
+  return result;
+#endif
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE  ) && (__ARM_FEATURE_CMSE   == 3))
+/**
+  \brief   Get Main Stack Pointer Limit (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence zero is returned always.
+
+  \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
+  \return               MSPLIM Register value
+ */
+__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  return 0U;
+#else
+  uint32_t result;
+  __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
+  return result;
+#endif
+}
+#endif
+
+
+/**
+  \brief   Set Main Stack Pointer Limit
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored in non-secure
+  mode.
+
+  \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
+  \param [in]    MainStackPtrLimit  Main Stack Pointer Limit value to set
+ */
+__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+    (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  (void)MainStackPtrLimit;
+#else
+  __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
+#endif
+}
+
+
+#if (defined (__ARM_FEATURE_CMSE  ) && (__ARM_FEATURE_CMSE   == 3))
+/**
+  \brief   Set Main Stack Pointer Limit (non-secure)
+  Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure
+  Stack Pointer Limit register hence the write is silently ignored.
+
+  \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
+  \param [in]    MainStackPtrLimit  Main Stack Pointer value to set
+ */
+__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
+{
+#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)))
+  // without main extensions, the non-secure MSPLIM is RAZ/WI
+  (void)MainStackPtrLimit;
+#else
+  __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
+#endif
+}
+#endif
+
+#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+           (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    ) */
+
+
+/**
+  \brief   Get FPSCR
+  \details Returns the current value of the Floating Point Status/Control register.
+  \return               Floating Point Status/Control register value
+ */
+__STATIC_FORCEINLINE uint32_t __get_FPSCR(void)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+#if __has_builtin(__builtin_arm_get_fpscr) 
+// Re-enable using built-in when GCC has been fixed
+// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2)
+  /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */
+  return __builtin_arm_get_fpscr();
+#else
+  uint32_t result;
+
+  __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+  return(result);
+#endif
+#else
+  return(0U);
+#endif
+}
+
+
+/**
+  \brief   Set FPSCR
+  \details Assigns the given value to the Floating Point Status/Control register.
+  \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+#if __has_builtin(__builtin_arm_set_fpscr)
+// Re-enable using built-in when GCC has been fixed
+// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2)
+  /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */
+  __builtin_arm_set_fpscr(fpscr);
+#else
+  __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory");
+#endif
+#else
+  (void)fpscr;
+#endif
+}
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_RW_REG(r) "+l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_RW_REG(r) "+r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+  \brief   No Operation
+  \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP()                             __ASM volatile ("nop")
+
+/**
+  \brief   Wait For Interrupt
+  \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI()                             __ASM volatile ("wfi")
+
+
+/**
+  \brief   Wait For Event
+  \details Wait For Event is a hint instruction that permits the processor to enter
+           a low-power state until one of a number of events occurs.
+ */
+#define __WFE()                             __ASM volatile ("wfe")
+
+
+/**
+  \brief   Send Event
+  \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV()                             __ASM volatile ("sev")
+
+
+/**
+  \brief   Instruction Synchronization Barrier
+  \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+           so that all instructions following the ISB are fetched from cache or memory,
+           after the instruction has been completed.
+ */
+__STATIC_FORCEINLINE void __ISB(void)
+{
+  __ASM volatile ("isb 0xF":::"memory");
+}
+
+
+/**
+  \brief   Data Synchronization Barrier
+  \details Acts as a special kind of Data Memory Barrier.
+           It completes when all explicit memory accesses before this instruction complete.
+ */
+__STATIC_FORCEINLINE void __DSB(void)
+{
+  __ASM volatile ("dsb 0xF":::"memory");
+}
+
+
+/**
+  \brief   Data Memory Barrier
+  \details Ensures the apparent order of the explicit memory operations before
+           and after the instruction, without ensuring their completion.
+ */
+__STATIC_FORCEINLINE void __DMB(void)
+{
+  __ASM volatile ("dmb 0xF":::"memory");
+}
+
+
+/**
+  \brief   Reverse byte order (32 bit)
+  \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+__STATIC_FORCEINLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+  return __builtin_bswap32(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return result;
+#endif
+}
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return result;
+}
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+__STATIC_FORCEINLINE int16_t __REVSH(int16_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+  return (int16_t)__builtin_bswap16(value);
+#else
+  int16_t result;
+
+  __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return result;
+#endif
+}
+
+
+/**
+  \brief   Rotate Right in unsigned value (32 bit)
+  \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+  \param [in]    op1  Value to rotate
+  \param [in]    op2  Number of Bits to rotate
+  \return               Rotated value
+ */
+__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+  op2 %= 32U;
+  if (op2 == 0U)
+  {
+    return op1;
+  }
+  return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+  \brief   Breakpoint
+  \details Causes the processor to enter Debug state.
+           Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+  \param [in]    value  is ignored by the processor.
+                 If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __ASM volatile ("bkpt "#value)
+
+
+/**
+  \brief   Reverse bit order of value
+  \details Reverses the bit order of the given value.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+
+#if ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+     (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+     (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    )
+   __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+  uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
+
+  result = value;                      /* r will be reversed bits of v; first get LSB of v */
+  for (value >>= 1U; value != 0U; value >>= 1U)
+  {
+    result <<= 1U;
+    result |= value & 1U;
+    s--;
+  }
+  result <<= s;                        /* shift when v's highest bits are zero */
+#endif
+  return result;
+}
+
+
+/**
+  \brief   Count leading zeros
+  \details Counts the number of leading zeros of a data value.
+  \param [in]  value  Value to count the leading zeros
+  \return             number of leading zeros in value
+ */
+#define __CLZ             (uint8_t)__builtin_clz
+
+
+#if ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+     (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+     (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+/**
+  \brief   LDR Exclusive (8 bit)
+  \details Executes a exclusive LDR instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/**
+  \brief   LDR Exclusive (16 bit)
+  \details Executes a exclusive LDR instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint16_t) result);    /* Add explicit type cast here */
+}
+
+
+/**
+  \brief   LDR Exclusive (32 bit)
+  \details Executes a exclusive LDR instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+   return(result);
+}
+
+
+/**
+  \brief   STR Exclusive (8 bit)
+  \details Executes a exclusive STR instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/**
+  \brief   STR Exclusive (16 bit)
+  \details Executes a exclusive STR instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/**
+  \brief   STR Exclusive (32 bit)
+  \details Executes a exclusive STR instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/**
+  \brief   Remove the exclusive lock
+  \details Removes the exclusive lock which is created by LDREX.
+ */
+__STATIC_FORCEINLINE void __CLREX(void)
+{
+  __ASM volatile ("clrex" ::: "memory");
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+           (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    ) */
+
+
+#if ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+     (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+     (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    )
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  ARG1  Value to be saturated
+  \param [in]  ARG2  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+__extension__ \
+({                          \
+  int32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  ARG1  Value to be saturated
+  \param [in]  ARG2  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+ __extension__ \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/**
+  \brief   Rotate Right with Extend (32 bit)
+  \details Moves each bit of a bitstring right by one bit.
+           The carry input is shifted in at the left end of the bitstring.
+  \param [in]    value  Value to rotate
+  \return               Rotated value
+ */
+__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/**
+  \brief   LDRT Unprivileged (8 bit)
+  \details Executes a Unprivileged LDRT instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" );
+#endif
+   return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/**
+  \brief   LDRT Unprivileged (16 bit)
+  \details Executes a Unprivileged LDRT instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" );
+#endif
+   return ((uint16_t) result);    /* Add explicit type cast here */
+}
+
+
+/**
+  \brief   LDRT Unprivileged (32 bit)
+  \details Executes a Unprivileged LDRT instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
+   return(result);
+}
+
+
+/**
+  \brief   STRT Unprivileged (8 bit)
+  \details Executes a Unprivileged STRT instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
+{
+   __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   STRT Unprivileged (16 bit)
+  \details Executes a Unprivileged STRT instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
+{
+   __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   STRT Unprivileged (32 bit)
+  \details Executes a Unprivileged STRT instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
+{
+   __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
+}
+
+#else  /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    ) */
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat)
+{
+  if ((sat >= 1U) && (sat <= 32U))
+  {
+    const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+    const int32_t min = -1 - max ;
+    if (val > max)
+    {
+      return max;
+    }
+    else if (val < min)
+    {
+      return min;
+    }
+  }
+  return val;
+}
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat)
+{
+  if (sat <= 31U)
+  {
+    const uint32_t max = ((1U << sat) - 1U);
+    if (val > (int32_t)max)
+    {
+      return max;
+    }
+    else if (val < 0)
+    {
+      return 0U;
+    }
+  }
+  return (uint32_t)val;
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__      ) && (__ARM_ARCH_7M__      == 1)) || \
+           (defined (__ARM_ARCH_7EM__     ) && (__ARM_ARCH_7EM__     == 1)) || \
+           (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))    ) */
+
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+/**
+  \brief   Load-Acquire (8 bit)
+  \details Executes a LDAB instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
+   return ((uint8_t) result);
+}
+
+
+/**
+  \brief   Load-Acquire (16 bit)
+  \details Executes a LDAH instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
+   return ((uint16_t) result);
+}
+
+
+/**
+  \brief   Load-Acquire (32 bit)
+  \details Executes a LDA instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr)
+{
+    uint32_t result;
+
+   __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
+   return(result);
+}
+
+
+/**
+  \brief   Store-Release (8 bit)
+  \details Executes a STLB instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
+{
+   __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   Store-Release (16 bit)
+  \details Executes a STLH instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
+{
+   __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   Store-Release (32 bit)
+  \details Executes a STL instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr)
+{
+   __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+  \brief   Load-Acquire Exclusive (8 bit)
+  \details Executes a LDAB exclusive instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) );
+   return ((uint8_t) result);
+}
+
+
+/**
+  \brief   Load-Acquire Exclusive (16 bit)
+  \details Executes a LDAH exclusive instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) );
+   return ((uint16_t) result);
+}
+
+
+/**
+  \brief   Load-Acquire Exclusive (32 bit)
+  \details Executes a LDA exclusive instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) );
+   return(result);
+}
+
+
+/**
+  \brief   Store-Release Exclusive (8 bit)
+  \details Executes a STLB exclusive instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
+{
+   uint32_t result;
+
+   __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/**
+  \brief   Store-Release Exclusive (16 bit)
+  \details Executes a STLH exclusive instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
+{
+   uint32_t result;
+
+   __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/**
+  \brief   Store-Release Exclusive (32 bit)
+  \details Executes a STL exclusive instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
+{
+   uint32_t result;
+
+   __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+           (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    ) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1))
+
+__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({                          \
+  int32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUAD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUSD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   /* Little endian */
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               /* Big endian */
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__STATIC_FORCEINLINE uint32_t __SEL  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE  int32_t __QADD( int32_t op1,  int32_t op2)
+{
+  int32_t result;
+
+  __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__STATIC_FORCEINLINE  int32_t __QSUB( int32_t op1,  int32_t op2)
+{
+  int32_t result;
+
+  __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+#if 0
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  if (ARG3 == 0) \
+    __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2)  ); \
+  else \
+    __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+#endif
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r"  (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__ARM_FEATURE_DSP == 1) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#pragma GCC diagnostic pop
+
+#endif /* __CMSIS_GCC_H */
diff --git a/test/Drivers/CMSIS/Include/cmsis_iccarm.h b/test/Drivers/CMSIS/Include/cmsis_iccarm.h
new file mode 100644
index 0000000..3c90a2c
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/cmsis_iccarm.h
@@ -0,0 +1,935 @@
+/**************************************************************************//**
+ * @file     cmsis_iccarm.h
+ * @brief    CMSIS compiler ICCARM (IAR Compiler for Arm) header file
+ * @version  V5.0.7
+ * @date     19. June 2018
+ ******************************************************************************/
+
+//------------------------------------------------------------------------------
+//
+// Copyright (c) 2017-2018 IAR Systems
+//
+// Licensed under the Apache License, Version 2.0 (the "License")
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+//------------------------------------------------------------------------------
+
+
+#ifndef __CMSIS_ICCARM_H__
+#define __CMSIS_ICCARM_H__
+
+#ifndef __ICCARM__
+  #error This file should only be compiled by ICCARM
+#endif
+
+#pragma system_include
+
+#define __IAR_FT _Pragma("inline=forced") __intrinsic
+
+#if (__VER__ >= 8000000)
+  #define __ICCARM_V8 1
+#else
+  #define __ICCARM_V8 0
+#endif
+
+#ifndef __ALIGNED
+  #if __ICCARM_V8
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #elif (__VER__ >= 7080000)
+    /* Needs IAR language extensions */
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #else
+    #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+#endif
+
+
+/* Define compiler macros for CPU architecture, used in CMSIS 5.
+ */
+#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__
+/* Macros already defined */
+#else
+  #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M'
+    #if __ARM_ARCH == 6
+      #define __ARM_ARCH_6M__ 1
+    #elif __ARM_ARCH == 7
+      #if __ARM_FEATURE_DSP
+        #define __ARM_ARCH_7EM__ 1
+      #else
+        #define __ARM_ARCH_7M__ 1
+      #endif
+    #endif /* __ARM_ARCH */
+  #endif /* __ARM_ARCH_PROFILE == 'M' */
+#endif
+
+/* Alternativ core deduction for older ICCARM's */
+#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \
+    !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__)
+  #if defined(__ARM6M__) && (__CORE__ == __ARM6M__)
+    #define __ARM_ARCH_6M__ 1
+  #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__)
+    #define __ARM_ARCH_7M__ 1
+  #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__)
+    #define __ARM_ARCH_7EM__  1
+  #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #else
+    #error "Unknown target."
+  #endif
+#endif
+
+
+
+#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1
+  #define __IAR_M0_FAMILY  1
+#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1
+  #define __IAR_M0_FAMILY  1
+#else
+  #define __IAR_M0_FAMILY  0
+#endif
+
+
+#ifndef __ASM
+  #define __ASM __asm
+#endif
+
+#ifndef __INLINE
+  #define __INLINE inline
+#endif
+
+#ifndef   __NO_RETURN
+  #if __ICCARM_V8
+    #define __NO_RETURN __attribute__((__noreturn__))
+  #else
+    #define __NO_RETURN _Pragma("object_attribute=__noreturn")
+  #endif
+#endif
+
+#ifndef   __PACKED
+  #if __ICCARM_V8
+    #define __PACKED __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED __packed
+  #endif
+#endif
+
+#ifndef   __PACKED_STRUCT
+  #if __ICCARM_V8
+    #define __PACKED_STRUCT struct __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_STRUCT __packed struct
+  #endif
+#endif
+
+#ifndef   __PACKED_UNION
+  #if __ICCARM_V8
+    #define __PACKED_UNION union __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_UNION __packed union
+  #endif
+#endif
+
+#ifndef   __RESTRICT
+  #define __RESTRICT            __restrict
+#endif
+
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE       static inline
+#endif
+
+#ifndef   __FORCEINLINE
+  #define __FORCEINLINE         _Pragma("inline=forced")
+#endif
+
+#ifndef   __STATIC_FORCEINLINE
+  #define __STATIC_FORCEINLINE  __FORCEINLINE __STATIC_INLINE
+#endif
+
+#ifndef __UNALIGNED_UINT16_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint16_t __iar_uint16_read(void const *ptr)
+{
+  return *(__packed uint16_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR)
+#endif
+
+
+#ifndef __UNALIGNED_UINT16_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val)
+{
+  *(__packed uint16_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint32_t __iar_uint32_read(void const *ptr)
+{
+  return *(__packed uint32_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR)
+#endif
+
+#ifndef __UNALIGNED_UINT32_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val)
+{
+  *(__packed uint32_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32   /* deprecated */
+#pragma language=save
+#pragma language=extended
+__packed struct  __iar_u32 { uint32_t v; };
+#pragma language=restore
+#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v)
+#endif
+
+#ifndef   __USED
+  #if __ICCARM_V8
+    #define __USED __attribute__((used))
+  #else
+    #define __USED _Pragma("__root")
+  #endif
+#endif
+
+#ifndef   __WEAK
+  #if __ICCARM_V8
+    #define __WEAK __attribute__((weak))
+  #else
+    #define __WEAK _Pragma("__weak")
+  #endif
+#endif
+
+
+#ifndef __ICCARM_INTRINSICS_VERSION__
+  #define __ICCARM_INTRINSICS_VERSION__  0
+#endif
+
+#if __ICCARM_INTRINSICS_VERSION__ == 2
+
+  #if defined(__CLZ)
+    #undef __CLZ
+  #endif
+  #if defined(__REVSH)
+    #undef __REVSH
+  #endif
+  #if defined(__RBIT)
+    #undef __RBIT
+  #endif
+  #if defined(__SSAT)
+    #undef __SSAT
+  #endif
+  #if defined(__USAT)
+    #undef __USAT
+  #endif
+
+  #include "iccarm_builtin.h"
+
+  #define __disable_fault_irq __iar_builtin_disable_fiq
+  #define __disable_irq       __iar_builtin_disable_interrupt
+  #define __enable_fault_irq  __iar_builtin_enable_fiq
+  #define __enable_irq        __iar_builtin_enable_interrupt
+  #define __arm_rsr           __iar_builtin_rsr
+  #define __arm_wsr           __iar_builtin_wsr
+
+
+  #define __get_APSR()                (__arm_rsr("APSR"))
+  #define __get_BASEPRI()             (__arm_rsr("BASEPRI"))
+  #define __get_CONTROL()             (__arm_rsr("CONTROL"))
+  #define __get_FAULTMASK()           (__arm_rsr("FAULTMASK"))
+
+  #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+       (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+    #define __get_FPSCR()             (__arm_rsr("FPSCR"))
+    #define __set_FPSCR(VALUE)        (__arm_wsr("FPSCR", (VALUE)))
+  #else
+    #define __get_FPSCR()             ( 0 )
+    #define __set_FPSCR(VALUE)        ((void)VALUE)
+  #endif
+
+  #define __get_IPSR()                (__arm_rsr("IPSR"))
+  #define __get_MSP()                 (__arm_rsr("MSP"))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __get_MSPLIM()            (0U)
+  #else
+    #define __get_MSPLIM()            (__arm_rsr("MSPLIM"))
+  #endif
+  #define __get_PRIMASK()             (__arm_rsr("PRIMASK"))
+  #define __get_PSP()                 (__arm_rsr("PSP"))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __get_PSPLIM()            (0U)
+  #else
+    #define __get_PSPLIM()            (__arm_rsr("PSPLIM"))
+  #endif
+
+  #define __get_xPSR()                (__arm_rsr("xPSR"))
+
+  #define __set_BASEPRI(VALUE)        (__arm_wsr("BASEPRI", (VALUE)))
+  #define __set_BASEPRI_MAX(VALUE)    (__arm_wsr("BASEPRI_MAX", (VALUE)))
+  #define __set_CONTROL(VALUE)        (__arm_wsr("CONTROL", (VALUE)))
+  #define __set_FAULTMASK(VALUE)      (__arm_wsr("FAULTMASK", (VALUE)))
+  #define __set_MSP(VALUE)            (__arm_wsr("MSP", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __set_MSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_MSPLIM(VALUE)       (__arm_wsr("MSPLIM", (VALUE)))
+  #endif
+  #define __set_PRIMASK(VALUE)        (__arm_wsr("PRIMASK", (VALUE)))
+  #define __set_PSP(VALUE)            (__arm_wsr("PSP", (VALUE)))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __set_PSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_PSPLIM(VALUE)       (__arm_wsr("PSPLIM", (VALUE)))
+  #endif
+
+  #define __TZ_get_CONTROL_NS()       (__arm_rsr("CONTROL_NS"))
+  #define __TZ_set_CONTROL_NS(VALUE)  (__arm_wsr("CONTROL_NS", (VALUE)))
+  #define __TZ_get_PSP_NS()           (__arm_rsr("PSP_NS"))
+  #define __TZ_set_PSP_NS(VALUE)      (__arm_wsr("PSP_NS", (VALUE)))
+  #define __TZ_get_MSP_NS()           (__arm_rsr("MSP_NS"))
+  #define __TZ_set_MSP_NS(VALUE)      (__arm_wsr("MSP_NS", (VALUE)))
+  #define __TZ_get_SP_NS()            (__arm_rsr("SP_NS"))
+  #define __TZ_set_SP_NS(VALUE)       (__arm_wsr("SP_NS", (VALUE)))
+  #define __TZ_get_PRIMASK_NS()       (__arm_rsr("PRIMASK_NS"))
+  #define __TZ_set_PRIMASK_NS(VALUE)  (__arm_wsr("PRIMASK_NS", (VALUE)))
+  #define __TZ_get_BASEPRI_NS()       (__arm_rsr("BASEPRI_NS"))
+  #define __TZ_set_BASEPRI_NS(VALUE)  (__arm_wsr("BASEPRI_NS", (VALUE)))
+  #define __TZ_get_FAULTMASK_NS()     (__arm_rsr("FAULTMASK_NS"))
+  #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __TZ_get_PSPLIM_NS()      (0U)
+    #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE))
+  #else
+    #define __TZ_get_PSPLIM_NS()      (__arm_rsr("PSPLIM_NS"))
+    #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE)))
+  #endif
+
+  #define __TZ_get_MSPLIM_NS()        (__arm_rsr("MSPLIM_NS"))
+  #define __TZ_set_MSPLIM_NS(VALUE)   (__arm_wsr("MSPLIM_NS", (VALUE)))
+
+  #define __NOP     __iar_builtin_no_operation
+
+  #define __CLZ     __iar_builtin_CLZ
+  #define __CLREX   __iar_builtin_CLREX
+
+  #define __DMB     __iar_builtin_DMB
+  #define __DSB     __iar_builtin_DSB
+  #define __ISB     __iar_builtin_ISB
+
+  #define __LDREXB  __iar_builtin_LDREXB
+  #define __LDREXH  __iar_builtin_LDREXH
+  #define __LDREXW  __iar_builtin_LDREX
+
+  #define __RBIT    __iar_builtin_RBIT
+  #define __REV     __iar_builtin_REV
+  #define __REV16   __iar_builtin_REV16
+
+  __IAR_FT int16_t __REVSH(int16_t val)
+  {
+    return (int16_t) __iar_builtin_REVSH(val);
+  }
+
+  #define __ROR     __iar_builtin_ROR
+  #define __RRX     __iar_builtin_RRX
+
+  #define __SEV     __iar_builtin_SEV
+
+  #if !__IAR_M0_FAMILY
+    #define __SSAT    __iar_builtin_SSAT
+  #endif
+
+  #define __STREXB  __iar_builtin_STREXB
+  #define __STREXH  __iar_builtin_STREXH
+  #define __STREXW  __iar_builtin_STREX
+
+  #if !__IAR_M0_FAMILY
+    #define __USAT    __iar_builtin_USAT
+  #endif
+
+  #define __WFE     __iar_builtin_WFE
+  #define __WFI     __iar_builtin_WFI
+
+  #if __ARM_MEDIA__
+    #define __SADD8   __iar_builtin_SADD8
+    #define __QADD8   __iar_builtin_QADD8
+    #define __SHADD8  __iar_builtin_SHADD8
+    #define __UADD8   __iar_builtin_UADD8
+    #define __UQADD8  __iar_builtin_UQADD8
+    #define __UHADD8  __iar_builtin_UHADD8
+    #define __SSUB8   __iar_builtin_SSUB8
+    #define __QSUB8   __iar_builtin_QSUB8
+    #define __SHSUB8  __iar_builtin_SHSUB8
+    #define __USUB8   __iar_builtin_USUB8
+    #define __UQSUB8  __iar_builtin_UQSUB8
+    #define __UHSUB8  __iar_builtin_UHSUB8
+    #define __SADD16  __iar_builtin_SADD16
+    #define __QADD16  __iar_builtin_QADD16
+    #define __SHADD16 __iar_builtin_SHADD16
+    #define __UADD16  __iar_builtin_UADD16
+    #define __UQADD16 __iar_builtin_UQADD16
+    #define __UHADD16 __iar_builtin_UHADD16
+    #define __SSUB16  __iar_builtin_SSUB16
+    #define __QSUB16  __iar_builtin_QSUB16
+    #define __SHSUB16 __iar_builtin_SHSUB16
+    #define __USUB16  __iar_builtin_USUB16
+    #define __UQSUB16 __iar_builtin_UQSUB16
+    #define __UHSUB16 __iar_builtin_UHSUB16
+    #define __SASX    __iar_builtin_SASX
+    #define __QASX    __iar_builtin_QASX
+    #define __SHASX   __iar_builtin_SHASX
+    #define __UASX    __iar_builtin_UASX
+    #define __UQASX   __iar_builtin_UQASX
+    #define __UHASX   __iar_builtin_UHASX
+    #define __SSAX    __iar_builtin_SSAX
+    #define __QSAX    __iar_builtin_QSAX
+    #define __SHSAX   __iar_builtin_SHSAX
+    #define __USAX    __iar_builtin_USAX
+    #define __UQSAX   __iar_builtin_UQSAX
+    #define __UHSAX   __iar_builtin_UHSAX
+    #define __USAD8   __iar_builtin_USAD8
+    #define __USADA8  __iar_builtin_USADA8
+    #define __SSAT16  __iar_builtin_SSAT16
+    #define __USAT16  __iar_builtin_USAT16
+    #define __UXTB16  __iar_builtin_UXTB16
+    #define __UXTAB16 __iar_builtin_UXTAB16
+    #define __SXTB16  __iar_builtin_SXTB16
+    #define __SXTAB16 __iar_builtin_SXTAB16
+    #define __SMUAD   __iar_builtin_SMUAD
+    #define __SMUADX  __iar_builtin_SMUADX
+    #define __SMMLA   __iar_builtin_SMMLA
+    #define __SMLAD   __iar_builtin_SMLAD
+    #define __SMLADX  __iar_builtin_SMLADX
+    #define __SMLALD  __iar_builtin_SMLALD
+    #define __SMLALDX __iar_builtin_SMLALDX
+    #define __SMUSD   __iar_builtin_SMUSD
+    #define __SMUSDX  __iar_builtin_SMUSDX
+    #define __SMLSD   __iar_builtin_SMLSD
+    #define __SMLSDX  __iar_builtin_SMLSDX
+    #define __SMLSLD  __iar_builtin_SMLSLD
+    #define __SMLSLDX __iar_builtin_SMLSLDX
+    #define __SEL     __iar_builtin_SEL
+    #define __QADD    __iar_builtin_QADD
+    #define __QSUB    __iar_builtin_QSUB
+    #define __PKHBT   __iar_builtin_PKHBT
+    #define __PKHTB   __iar_builtin_PKHTB
+  #endif
+
+#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #define __CLZ  __cmsis_iar_clz_not_active
+    #define __SSAT __cmsis_iar_ssat_not_active
+    #define __USAT __cmsis_iar_usat_not_active
+    #define __RBIT __cmsis_iar_rbit_not_active
+    #define __get_APSR  __cmsis_iar_get_APSR_not_active
+  #endif
+
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #define __get_FPSCR __cmsis_iar_get_FPSR_not_active
+    #define __set_FPSCR __cmsis_iar_set_FPSR_not_active
+  #endif
+
+  #ifdef __INTRINSICS_INCLUDED
+  #error intrinsics.h is already included previously!
+  #endif
+
+  #include 
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #undef __CLZ
+    #undef __SSAT
+    #undef __USAT
+    #undef __RBIT
+    #undef __get_APSR
+
+    __STATIC_INLINE uint8_t __CLZ(uint32_t data)
+    {
+      if (data == 0U) { return 32U; }
+
+      uint32_t count = 0U;
+      uint32_t mask = 0x80000000U;
+
+      while ((data & mask) == 0U)
+      {
+        count += 1U;
+        mask = mask >> 1U;
+      }
+      return count;
+    }
+
+    __STATIC_INLINE uint32_t __RBIT(uint32_t v)
+    {
+      uint8_t sc = 31U;
+      uint32_t r = v;
+      for (v >>= 1U; v; v >>= 1U)
+      {
+        r <<= 1U;
+        r |= v & 1U;
+        sc--;
+      }
+      return (r << sc);
+    }
+
+    __STATIC_INLINE  uint32_t __get_APSR(void)
+    {
+      uint32_t res;
+      __asm("MRS      %0,APSR" : "=r" (res));
+      return res;
+    }
+
+  #endif
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #undef __get_FPSCR
+    #undef __set_FPSCR
+    #define __get_FPSCR()       (0)
+    #define __set_FPSCR(VALUE)  ((void)VALUE)
+  #endif
+
+  #pragma diag_suppress=Pe940
+  #pragma diag_suppress=Pe177
+
+  #define __enable_irq    __enable_interrupt
+  #define __disable_irq   __disable_interrupt
+  #define __NOP           __no_operation
+
+  #define __get_xPSR      __get_PSR
+
+  #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0)
+
+    __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr)
+    {
+      return __LDREX((unsigned long *)ptr);
+    }
+
+    __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr)
+    {
+      return __STREX(value, (unsigned long *)ptr);
+    }
+  #endif
+
+
+  /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+  #if (__CORTEX_M >= 0x03)
+
+    __IAR_FT uint32_t __RRX(uint32_t value)
+    {
+      uint32_t result;
+      __ASM("RRX      %0, %1" : "=r"(result) : "r" (value) : "cc");
+      return(result);
+    }
+
+    __IAR_FT void __set_BASEPRI_MAX(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_MAX,%0"::"r" (value));
+    }
+
+
+    #define __enable_fault_irq  __enable_fiq
+    #define __disable_fault_irq __disable_fiq
+
+
+  #endif /* (__CORTEX_M >= 0x03) */
+
+  __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2)
+  {
+    return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2));
+  }
+
+  #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+       (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+   __IAR_FT uint32_t __get_MSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,MSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_MSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      MSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __get_PSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_PSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __TZ_get_CONTROL_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,CONTROL_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_CONTROL_NS(uint32_t value)
+    {
+      __asm volatile("MSR      CONTROL_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_SP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,SP_NS" : "=r" (res));
+      return res;
+    }
+    __IAR_FT void   __TZ_set_SP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      SP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PRIMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PRIMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PRIMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PRIMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_BASEPRI_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,BASEPRI_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_BASEPRI_NS(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_FAULTMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,FAULTMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_FAULTMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      FAULTMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSPLIM_NS(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM_NS" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSPLIM_NS(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM_NS,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSPLIM_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSPLIM_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSPLIM_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSPLIM_NS,%0" :: "r" (value));
+    }
+
+  #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#endif   /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+#define __BKPT(value)    __asm volatile ("BKPT     %0" : : "i"(value))
+
+#if __IAR_M0_FAMILY
+  __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+  {
+    if ((sat >= 1U) && (sat <= 32U))
+    {
+      const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+      const int32_t min = -1 - max ;
+      if (val > max)
+      {
+        return max;
+      }
+      else if (val < min)
+      {
+        return min;
+      }
+    }
+    return val;
+  }
+
+  __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+  {
+    if (sat <= 31U)
+    {
+      const uint32_t max = ((1U << sat) - 1U);
+      if (val > (int32_t)max)
+      {
+        return max;
+      }
+      else if (val < 0)
+      {
+        return 0U;
+      }
+    }
+    return (uint32_t)val;
+  }
+#endif
+
+#if (__CORTEX_M >= 0x03)   /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+
+  __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDRT(volatile uint32_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr)
+  {
+    __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr)
+  {
+    __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr)
+  {
+    __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory");
+  }
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+
+  __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDA(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr)
+  {
+    __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr)
+  {
+    __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr)
+  {
+    __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#undef __IAR_FT
+#undef __IAR_M0_FAMILY
+#undef __ICCARM_V8
+
+#pragma diag_default=Pe940
+#pragma diag_default=Pe177
+
+#endif /* __CMSIS_ICCARM_H__ */
diff --git a/test/Drivers/CMSIS/Include/cmsis_version.h b/test/Drivers/CMSIS/Include/cmsis_version.h
new file mode 100644
index 0000000..ae3f2e3
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/cmsis_version.h
@@ -0,0 +1,39 @@
+/**************************************************************************//**
+ * @file     cmsis_version.h
+ * @brief    CMSIS Core(M) Version definitions
+ * @version  V5.0.2
+ * @date     19. April 2017
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2017 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CMSIS_VERSION_H
+#define __CMSIS_VERSION_H
+
+/*  CMSIS Version definitions */
+#define __CM_CMSIS_VERSION_MAIN  ( 5U)                                      /*!< [31:16] CMSIS Core(M) main version */
+#define __CM_CMSIS_VERSION_SUB   ( 1U)                                      /*!< [15:0]  CMSIS Core(M) sub version */
+#define __CM_CMSIS_VERSION       ((__CM_CMSIS_VERSION_MAIN << 16U) | \
+                                   __CM_CMSIS_VERSION_SUB           )       /*!< CMSIS Core(M) version number */
+#endif
diff --git a/test/Drivers/CMSIS/Include/core_armv8mbl.h b/test/Drivers/CMSIS/Include/core_armv8mbl.h
new file mode 100644
index 0000000..ec76ab2
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_armv8mbl.h
@@ -0,0 +1,1918 @@
+/**************************************************************************//**
+ * @file     core_armv8mbl.h
+ * @brief    CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File
+ * @version  V5.0.7
+ * @date     22. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_ARMV8MBL_H_GENERIC
+#define __CORE_ARMV8MBL_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_ARMv8MBL
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS definitions */
+#define __ARMv8MBL_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __ARMv8MBL_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __ARMv8MBL_CMSIS_VERSION       ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \
+                                         __ARMv8MBL_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                     ( 2U)                                            /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MBL_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_ARMV8MBL_H_DEPENDANT
+#define __CORE_ARMV8MBL_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __ARMv8MBL_REV
+    #define __ARMv8MBL_REV               0x0000U
+    #warning "__ARMv8MBL_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0U
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+
+  #ifndef __ETM_PRESENT
+    #define __ETM_PRESENT             0U
+    #warning "__ETM_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MTB_PRESENT
+    #define __MTB_PRESENT             0U
+    #warning "__MTB_PRESENT not defined in device header file; using default!"
+  #endif
+
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group ARMv8MBL */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint32_t IPR[124U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+#else
+        uint32_t RESERVED0;
+#endif
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHPR[2U];               /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+        uint32_t RESERVED0[6U];
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x3UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Sizes Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Sizes Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[809U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  Software Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  Software Lock Status Register */
+        uint32_t RESERVED4[4U];
+  __IM  uint32_t TYPE;                   /*!< Offset: 0xFC8 (R/ )  Device Identifier Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_SWOSCALER_Pos              0U                                         /*!< TPI ACPR: SWOSCALER Position */
+#define TPI_ACPR_SWOSCALER_Msk             (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/)    /*!< TPI ACPR: SWOSCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI Periodic Synchronization Control Register Definitions */
+#define TPI_PSCR_PSCount_Pos                0U                                         /*!< TPI PSCR: PSCount Position */
+#define TPI_PSCR_PSCount_Msk               (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/)        /*!< TPI PSCR: TPSCount Mask */
+
+/* TPI Software Lock Status Register Definitions */
+#define TPI_LSR_nTT_Pos                     1U                                         /*!< TPI LSR: Not thirty-two bit. Position */
+#define TPI_LSR_nTT_Msk                    (0x1UL << TPI_LSR_nTT_Pos)                  /*!< TPI LSR: Not thirty-two bit. Mask */
+
+#define TPI_LSR_SLK_Pos                     1U                                         /*!< TPI LSR: Software Lock status Position */
+#define TPI_LSR_SLK_Msk                    (0x1UL << TPI_LSR_SLK_Pos)                  /*!< TPI LSR: Software Lock status Mask */
+
+#define TPI_LSR_SLI_Pos                     0U                                         /*!< TPI LSR: Software Lock implemented Position */
+#define TPI_LSR_SLI_Msk                    (0x1UL /*<< TPI_LSR_SLI_Pos*/)              /*!< TPI LSR: Software Lock implemented Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFO depth Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFO depth Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+        uint32_t RESERVED0[7U];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  1U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: EN Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: EN Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#endif
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_DWTENA_Pos         24U                                            /*!< CoreDebug DEMCR: DWTENA Position */
+#define CoreDebug_DEMCR_DWTENA_Msk         (1UL << CoreDebug_DEMCR_DWTENA_Pos)            /*!< CoreDebug DEMCR: DWTENA Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+           If VTOR is not present address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function TZ_SysTick_Config_NS is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MBL_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_armv8mml.h b/test/Drivers/CMSIS/Include/core_armv8mml.h
new file mode 100644
index 0000000..2d0f106
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_armv8mml.h
@@ -0,0 +1,2927 @@
+/**************************************************************************//**
+ * @file     core_armv8mml.h
+ * @brief    CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File
+ * @version  V5.0.7
+ * @date     06. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_ARMV8MML_H_GENERIC
+#define __CORE_ARMV8MML_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_ARMv8MML
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS Armv8MML definitions */
+#define __ARMv8MML_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __ARMv8MML_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __ARMv8MML_CMSIS_VERSION       ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \
+                                         __ARMv8MML_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                     (81U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined(__ARM_FEATURE_DSP)
+    #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MML_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_ARMV8MML_H_DEPENDANT
+#define __CORE_ARMV8MML_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __ARMv8MML_REV
+    #define __ARMv8MML_REV               0x0000U
+    #warning "__ARMv8MML_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DSP_PRESENT
+    #define __DSP_PRESENT             0U
+    #warning "__DSP_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group ARMv8MML */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+  - Core FPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16U                                            /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0) */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25U                                            /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t FPCA:1;                     /*!< bit:      2  Floating-point context active */
+    uint32_t SFPA:1;                     /*!< bit:      3  Secure floating-point active */
+    uint32_t _reserved1:28;              /*!< bit:  4..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SFPA_Pos                    3U                                            /*!< CONTROL: SFPA Position */
+#define CONTROL_SFPA_Msk                   (1UL << CONTROL_SFPA_Pos)                      /*!< CONTROL: SFPA Mask */
+
+#define CONTROL_FPCA_Pos                    2U                                            /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint8_t  IPR[496U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED6[580U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHPR[12U];              /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t ID_PFR[2U];             /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t ID_DFR;                 /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ID_ADR;                 /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t ID_MMFR[4U];            /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ID_ISAR[6U];            /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+  __IM  uint32_t CLIDR;                  /*!< Offset: 0x078 (R/ )  Cache Level ID register */
+  __IM  uint32_t CTR;                    /*!< Offset: 0x07C (R/ )  Cache Type register */
+  __IM  uint32_t CCSIDR;                 /*!< Offset: 0x080 (R/ )  Cache Size ID Register */
+  __IOM uint32_t CSSELR;                 /*!< Offset: 0x084 (R/W)  Cache Size Selection Register */
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+  __IOM uint32_t NSACR;                  /*!< Offset: 0x08C (R/W)  Non-Secure Access Control Register */
+        uint32_t RESERVED3[92U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0x200 ( /W)  Software Triggered Interrupt Register */
+        uint32_t RESERVED4[15U];
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x240 (R/ )  Media and VFP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x244 (R/ )  Media and VFP Feature Register 1 */
+  __IM  uint32_t MVFR2;                  /*!< Offset: 0x248 (R/ )  Media and VFP Feature Register 2 */
+        uint32_t RESERVED5[1U];
+  __OM  uint32_t ICIALLU;                /*!< Offset: 0x250 ( /W)  I-Cache Invalidate All to PoU */
+        uint32_t RESERVED6[1U];
+  __OM  uint32_t ICIMVAU;                /*!< Offset: 0x258 ( /W)  I-Cache Invalidate by MVA to PoU */
+  __OM  uint32_t DCIMVAC;                /*!< Offset: 0x25C ( /W)  D-Cache Invalidate by MVA to PoC */
+  __OM  uint32_t DCISW;                  /*!< Offset: 0x260 ( /W)  D-Cache Invalidate by Set-way */
+  __OM  uint32_t DCCMVAU;                /*!< Offset: 0x264 ( /W)  D-Cache Clean by MVA to PoU */
+  __OM  uint32_t DCCMVAC;                /*!< Offset: 0x268 ( /W)  D-Cache Clean by MVA to PoC */
+  __OM  uint32_t DCCSW;                  /*!< Offset: 0x26C ( /W)  D-Cache Clean by Set-way */
+  __OM  uint32_t DCCIMVAC;               /*!< Offset: 0x270 ( /W)  D-Cache Clean and Invalidate by MVA to PoC */
+  __OM  uint32_t DCCISW;                 /*!< Offset: 0x274 ( /W)  D-Cache Clean and Invalidate by Set-way */
+        uint32_t RESERVED7[6U];
+  __IOM uint32_t ITCMCR;                 /*!< Offset: 0x290 (R/W)  Instruction Tightly-Coupled Memory Control Register */
+  __IOM uint32_t DTCMCR;                 /*!< Offset: 0x294 (R/W)  Data Tightly-Coupled Memory Control Registers */
+  __IOM uint32_t AHBPCR;                 /*!< Offset: 0x298 (R/W)  AHBP Control Register */
+  __IOM uint32_t CACR;                   /*!< Offset: 0x29C (R/W)  L1 Cache Control Register */
+  __IOM uint32_t AHBSCR;                 /*!< Offset: 0x2A0 (R/W)  AHB Slave Control Register */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t ABFSR;                  /*!< Offset: 0x2A8 (R/W)  Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTPENDED_Pos    20U                                            /*!< SCB SHCSR: SECUREFAULTPENDED Position */
+#define SCB_SHCSR_SECUREFAULTPENDED_Msk    (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos)       /*!< SCB SHCSR: SECUREFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTENA_Pos       19U                                            /*!< SCB SHCSR: SECUREFAULTENA Position */
+#define SCB_SHCSR_SECUREFAULTENA_Msk       (1UL << SCB_SHCSR_SECUREFAULTENA_Pos)          /*!< SCB SHCSR: SECUREFAULTENA Mask */
+
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_SECUREFAULTACT_Pos        4U                                            /*!< SCB SHCSR: SECUREFAULTACT Position */
+#define SCB_SHCSR_SECUREFAULTACT_Msk       (1UL << SCB_SHCSR_SECUREFAULTACT_Pos)          /*!< SCB SHCSR: SECUREFAULTACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_STKOF_Pos                (SCB_CFSR_USGFAULTSR_Pos + 4U)                  /*!< SCB CFSR (UFSR): STKOF Position */
+#define SCB_CFSR_STKOF_Msk                (1UL << SCB_CFSR_STKOF_Pos)                     /*!< SCB CFSR (UFSR): STKOF Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Non-Secure Access Control Register Definitions */
+#define SCB_NSACR_CP11_Pos                 11U                                            /*!< SCB NSACR: CP11 Position */
+#define SCB_NSACR_CP11_Msk                 (1UL << SCB_NSACR_CP11_Pos)                    /*!< SCB NSACR: CP11 Mask */
+
+#define SCB_NSACR_CP10_Pos                 10U                                            /*!< SCB NSACR: CP10 Position */
+#define SCB_NSACR_CP10_Msk                 (1UL << SCB_NSACR_CP10_Pos)                    /*!< SCB NSACR: CP10 Mask */
+
+#define SCB_NSACR_CPn_Pos                   0U                                            /*!< SCB NSACR: CPn Position */
+#define SCB_NSACR_CPn_Msk                  (1UL /*<< SCB_NSACR_CPn_Pos*/)                 /*!< SCB NSACR: CPn Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos                 27U                                            /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk                 (7UL << SCB_CLIDR_LOUU_Pos)                    /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos                  24U                                            /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk                  (7UL << SCB_CLIDR_LOC_Pos)                     /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos                 29U                                            /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk                 (7UL << SCB_CTR_FORMAT_Pos)                    /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos                    24U                                            /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk                    (0xFUL << SCB_CTR_CWG_Pos)                     /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos                    20U                                            /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk                    (0xFUL << SCB_CTR_ERG_Pos)                     /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos               16U                                            /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk               (0xFUL << SCB_CTR_DMINLINE_Pos)                /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos                0U                                            /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk               (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/)            /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos                  31U                                            /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk                  (1UL << SCB_CCSIDR_WT_Pos)                     /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos                  30U                                            /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk                  (1UL << SCB_CCSIDR_WB_Pos)                     /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos                  29U                                            /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk                  (1UL << SCB_CCSIDR_RA_Pos)                     /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos                  28U                                            /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk                  (1UL << SCB_CCSIDR_WA_Pos)                     /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos             13U                                            /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk             (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos)           /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos        3U                                            /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk       (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos)      /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos             0U                                            /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk            (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/)           /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos                1U                                            /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk               (7UL << SCB_CSSELR_LEVEL_Pos)                  /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos                  0U                                            /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk                 (1UL /*<< SCB_CSSELR_IND_Pos*/)                /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos                  0U                                            /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk                 (0x1FFUL /*<< SCB_STIR_INTID_Pos*/)            /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos                  30U                                            /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk                  (3UL << SCB_DCISW_WAY_Pos)                     /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos                   5U                                            /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk                  (0x1FFUL << SCB_DCISW_SET_Pos)                 /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos                  30U                                            /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk                  (3UL << SCB_DCCSW_WAY_Pos)                     /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos                   5U                                            /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk                  (0x1FFUL << SCB_DCCSW_SET_Pos)                 /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos                 30U                                            /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk                 (3UL << SCB_DCCISW_WAY_Pos)                    /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos                  5U                                            /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk                 (0x1FFUL << SCB_DCCISW_SET_Pos)                /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos                   3U                                            /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk                  (0xFUL << SCB_ITCMCR_SZ_Pos)                   /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos                2U                                            /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk               (1UL << SCB_ITCMCR_RETEN_Pos)                  /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos                  1U                                            /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk                 (1UL << SCB_ITCMCR_RMW_Pos)                    /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos                   0U                                            /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk                  (1UL /*<< SCB_ITCMCR_EN_Pos*/)                 /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos                   3U                                            /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk                  (0xFUL << SCB_DTCMCR_SZ_Pos)                   /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos                2U                                            /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk               (1UL << SCB_DTCMCR_RETEN_Pos)                   /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos                  1U                                            /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk                 (1UL << SCB_DTCMCR_RMW_Pos)                    /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos                   0U                                            /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk                  (1UL /*<< SCB_DTCMCR_EN_Pos*/)                 /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos                   1U                                            /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk                  (7UL << SCB_AHBPCR_SZ_Pos)                     /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos                   0U                                            /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk                  (1UL /*<< SCB_AHBPCR_EN_Pos*/)                 /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos                2U                                            /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk               (1UL << SCB_CACR_FORCEWT_Pos)                  /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos                  1U                                            /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk                 (1UL << SCB_CACR_ECCEN_Pos)                    /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos                   0U                                            /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk                  (1UL /*<< SCB_CACR_SIWT_Pos*/)                 /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos           11U                                            /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk           (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos)           /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos                 2U                                            /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk                (0x1FFUL << SCB_AHBPCR_TPRI_Pos)               /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos                  0U                                            /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk                 (3UL /*<< SCB_AHBPCR_CTL_Pos*/)                /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos              8U                                            /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk             (3UL << SCB_ABFSR_AXIMTYPE_Pos)                /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos                  4U                                            /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk                 (1UL << SCB_ABFSR_EPPB_Pos)                    /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos                  3U                                            /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk                 (1UL << SCB_ABFSR_AXIM_Pos)                    /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos                  2U                                            /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk                 (1UL << SCB_ABFSR_AHBP_Pos)                    /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos                  1U                                            /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk                 (1UL << SCB_ABFSR_DTCM_Pos)                    /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos                  0U                                            /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk                 (1UL /*<< SCB_ABFSR_ITCM_Pos*/)                /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+  __IOM uint32_t CPPWR;                  /*!< Offset: 0x00C (R/W)  Coprocessor Power Control  Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  ITM Device Architecture Register */
+        uint32_t RESERVED6[4U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Stimulus Port Register Definitions */
+#define ITM_STIM_DISABLED_Pos               1U                                            /*!< ITM STIM: DISABLED Position */
+#define ITM_STIM_DISABLED_Msk              (0x1UL << ITM_STIM_DISABLED_Pos)               /*!< ITM STIM: DISABLED Mask */
+
+#define ITM_STIM_FIFOREADY_Pos              0U                                            /*!< ITM STIM: FIFOREADY Position */
+#define ITM_STIM_FIFOREADY_Msk             (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/)          /*!< ITM STIM: FIFOREADY Mask */
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TRACEBUSID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TRACEBUSID_Msk             (0x7FUL << ITM_TCR_TRACEBUSID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPRESCALE_Pos              8U                                            /*!< ITM TCR: TSPRESCALE Position */
+#define ITM_TCR_TSPRESCALE_Msk             (3UL << ITM_TCR_TSPRESCALE_Pos)                /*!< ITM TCR: TSPRESCALE Mask */
+
+#define ITM_TCR_STALLENA_Pos                5U                                            /*!< ITM TCR: STALLENA Position */
+#define ITM_TCR_STALLENA_Msk               (1UL << ITM_TCR_STALLENA_Pos)                  /*!< ITM TCR: STALLENA Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+        uint32_t RESERVED32[934U];
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R  )  Lock Status Register */
+        uint32_t RESERVED33[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  Device Architecture Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCDISS_Pos               23U                                         /*!< DWT CTRL: CYCDISS Position */
+#define DWT_CTRL_CYCDISS_Msk               (0x1UL << DWT_CTRL_CYCDISS_Pos)             /*!< DWT CTRL: CYCDISS Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x1UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Sizes Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Sizes Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[809U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  Software Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  Software Lock Status Register */
+        uint32_t RESERVED4[4U];
+  __IM  uint32_t TYPE;                   /*!< Offset: 0xFC8 (R/ )  Device Identifier Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_SWOSCALER_Pos              0U                                         /*!< TPI ACPR: SWOSCALER Position */
+#define TPI_ACPR_SWOSCALER_Msk             (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/)    /*!< TPI ACPR: SWOSCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI Periodic Synchronization Control Register Definitions */
+#define TPI_PSCR_PSCount_Pos                0U                                         /*!< TPI PSCR: PSCount Position */
+#define TPI_PSCR_PSCount_Msk               (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/)        /*!< TPI PSCR: TPSCount Mask */
+
+/* TPI Software Lock Status Register Definitions */
+#define TPI_LSR_nTT_Pos                     1U                                         /*!< TPI LSR: Not thirty-two bit. Position */
+#define TPI_LSR_nTT_Msk                    (0x1UL << TPI_LSR_nTT_Pos)                  /*!< TPI LSR: Not thirty-two bit. Mask */
+
+#define TPI_LSR_SLK_Pos                     1U                                         /*!< TPI LSR: Software Lock status Position */
+#define TPI_LSR_SLK_Msk                    (0x1UL << TPI_LSR_SLK_Pos)                  /*!< TPI LSR: Software Lock status Mask */
+
+#define TPI_LSR_SLI_Pos                     0U                                         /*!< TPI LSR: Software Lock implemented Position */
+#define TPI_LSR_SLI_Msk                    (0x1UL /*<< TPI_LSR_SLI_Pos*/)              /*!< TPI LSR: Software Lock implemented Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFO depth Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFO depth Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Region Base Address Register Alias 1 */
+  __IOM uint32_t RLAR_A1;                /*!< Offset: 0x018 (R/W)  MPU Region Limit Address Register Alias 1 */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Region Base Address Register Alias 2 */
+  __IOM uint32_t RLAR_A2;                /*!< Offset: 0x020 (R/W)  MPU Region Limit Address Register Alias 2 */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Region Base Address Register Alias 3 */
+  __IOM uint32_t RLAR_A3;                /*!< Offset: 0x028 (R/W)  MPU Region Limit Address Register Alias 3 */
+        uint32_t RESERVED0[1];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: Region enable bit Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: Region enable bit Disable Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#else
+        uint32_t RESERVED0[3];
+#endif
+  __IOM uint32_t SFSR;                   /*!< Offset: 0x014 (R/W)  Secure Fault Status Register */
+  __IOM uint32_t SFAR;                   /*!< Offset: 0x018 (R/W)  Secure Fault Address Register */
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/* Secure Fault Status Register Definitions */
+#define SAU_SFSR_LSERR_Pos                  7U                                            /*!< SAU SFSR: LSERR Position */
+#define SAU_SFSR_LSERR_Msk                 (1UL << SAU_SFSR_LSERR_Pos)                    /*!< SAU SFSR: LSERR Mask */
+
+#define SAU_SFSR_SFARVALID_Pos              6U                                            /*!< SAU SFSR: SFARVALID Position */
+#define SAU_SFSR_SFARVALID_Msk             (1UL << SAU_SFSR_SFARVALID_Pos)                /*!< SAU SFSR: SFARVALID Mask */
+
+#define SAU_SFSR_LSPERR_Pos                 5U                                            /*!< SAU SFSR: LSPERR Position */
+#define SAU_SFSR_LSPERR_Msk                (1UL << SAU_SFSR_LSPERR_Pos)                   /*!< SAU SFSR: LSPERR Mask */
+
+#define SAU_SFSR_INVTRAN_Pos                4U                                            /*!< SAU SFSR: INVTRAN Position */
+#define SAU_SFSR_INVTRAN_Msk               (1UL << SAU_SFSR_INVTRAN_Pos)                  /*!< SAU SFSR: INVTRAN Mask */
+
+#define SAU_SFSR_AUVIOL_Pos                 3U                                            /*!< SAU SFSR: AUVIOL Position */
+#define SAU_SFSR_AUVIOL_Msk                (1UL << SAU_SFSR_AUVIOL_Pos)                   /*!< SAU SFSR: AUVIOL Mask */
+
+#define SAU_SFSR_INVER_Pos                  2U                                            /*!< SAU SFSR: INVER Position */
+#define SAU_SFSR_INVER_Msk                 (1UL << SAU_SFSR_INVER_Pos)                    /*!< SAU SFSR: INVER Mask */
+
+#define SAU_SFSR_INVIS_Pos                  1U                                            /*!< SAU SFSR: INVIS Position */
+#define SAU_SFSR_INVIS_Msk                 (1UL << SAU_SFSR_INVIS_Pos)                    /*!< SAU SFSR: INVIS Mask */
+
+#define SAU_SFSR_INVEP_Pos                  0U                                            /*!< SAU SFSR: INVEP Position */
+#define SAU_SFSR_INVEP_Msk                 (1UL /*<< SAU_SFSR_INVEP_Pos*/)                /*!< SAU SFSR: INVEP Mask */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+  \brief    Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t FPCCR;                  /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register */
+  __IOM uint32_t FPCAR;                  /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register */
+  __IOM uint32_t FPDSCR;                 /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register */
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos                31U                                            /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30U                                            /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_LSPENS_Pos               29U                                            /*!< FPCCR: LSPENS Position */
+#define FPU_FPCCR_LSPENS_Msk               (1UL << FPU_FPCCR_LSPENS_Pos)                  /*!< FPCCR: LSPENS bit Mask */
+
+#define FPU_FPCCR_CLRONRET_Pos             28U                                            /*!< FPCCR: CLRONRET Position */
+#define FPU_FPCCR_CLRONRET_Msk             (1UL << FPU_FPCCR_CLRONRET_Pos)                /*!< FPCCR: CLRONRET bit Mask */
+
+#define FPU_FPCCR_CLRONRETS_Pos            27U                                            /*!< FPCCR: CLRONRETS Position */
+#define FPU_FPCCR_CLRONRETS_Msk            (1UL << FPU_FPCCR_CLRONRETS_Pos)               /*!< FPCCR: CLRONRETS bit Mask */
+
+#define FPU_FPCCR_TS_Pos                   26U                                            /*!< FPCCR: TS Position */
+#define FPU_FPCCR_TS_Msk                   (1UL << FPU_FPCCR_TS_Pos)                      /*!< FPCCR: TS bit Mask */
+
+#define FPU_FPCCR_UFRDY_Pos                10U                                            /*!< FPCCR: UFRDY Position */
+#define FPU_FPCCR_UFRDY_Msk                (1UL << FPU_FPCCR_UFRDY_Pos)                   /*!< FPCCR: UFRDY bit Mask */
+
+#define FPU_FPCCR_SPLIMVIOL_Pos             9U                                            /*!< FPCCR: SPLIMVIOL Position */
+#define FPU_FPCCR_SPLIMVIOL_Msk            (1UL << FPU_FPCCR_SPLIMVIOL_Pos)               /*!< FPCCR: SPLIMVIOL bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8U                                            /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_SFRDY_Pos                 7U                                            /*!< FPCCR: SFRDY Position */
+#define FPU_FPCCR_SFRDY_Msk                (1UL << FPU_FPCCR_SFRDY_Pos)                   /*!< FPCCR: SFRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6U                                            /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5U                                            /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4U                                            /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3U                                            /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_S_Pos                     2U                                            /*!< FPCCR: Security status of the FP context bit Position */
+#define FPU_FPCCR_S_Msk                    (1UL << FPU_FPCCR_S_Pos)                       /*!< FPCCR: Security status of the FP context bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1U                                            /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0U                                            /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos               3U                                            /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos                 26U                                            /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25U                                            /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24U                                            /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22U                                            /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28U                                            /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24U                                            /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20U                                            /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16U                                            /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12U                                            /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8U                                            /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4U                                            /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0U                                            /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28U                                            /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24U                                            /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4U                                            /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0U                                            /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define ITM_BASE            (0xE0000000UL)                             /*!< ITM Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+  #define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE         ) /*!< System control Register not in SCB */
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define ITM                 ((ITM_Type       *)     ITM_BASE         ) /*!< ITM configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+  #define FPU_BASE            (SCS_BASE +  0x0F30UL)                     /*!< Floating Point Unit */
+  #define FPU                 ((FPU_Type       *)     FPU_BASE         ) /*!< Floating Point Unit */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCnSCB_NS           ((SCnSCB_Type    *)     SCS_BASE_NS      ) /*!< System control Register not in SCB(non-secure address space) */
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+  #define FPU_BASE_NS         (SCS_BASE_NS +  0x0F30UL)                  /*!< Floating Point Unit               (non-secure address space) */
+  #define FPU_NS              ((FPU_Type       *)     FPU_BASE_NS      ) /*!< Floating Point Unit               (non-secure address space) */
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Set Priority Grouping (non-secure)
+  \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB_NS->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk));             /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priorty group */
+  SCB_NS->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping (non-secure)
+  \details Reads the priority grouping field from the non-secure NVIC when in secure state.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void)
+{
+  return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = FPU->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U)
+  {
+    return 2U;           /* Double + Single precision FPU */
+  }
+  else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function TZ_SysTick_Config_NS is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_ARMV8MML_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm0.h b/test/Drivers/CMSIS/Include/core_cm0.h
new file mode 100644
index 0000000..6f82227
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm0.h
@@ -0,0 +1,949 @@
+/**************************************************************************//**
+ * @file     core_cm0.h
+ * @brief    CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version  V5.0.5
+ * @date     28. May 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M0
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM0_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (0U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0_REV
+    #define __CM0_REV               0x0000U
+    #warning "__CM0_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M0 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm0plus.h b/test/Drivers/CMSIS/Include/core_cm0plus.h
new file mode 100644
index 0000000..b9377e8
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm0plus.h
@@ -0,0 +1,1083 @@
+/**************************************************************************//**
+ * @file     core_cm0plus.h
+ * @brief    CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version  V5.0.6
+ * @date     28. May 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex-M0+
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM0+ definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN)                  /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB  (__CM_CMSIS_VERSION_SUB)                   /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION      ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
+                                       __CM0PLUS_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                   (0U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0PLUS_REV
+    #define __CM0PLUS_REV             0x0000U
+    #warning "__CM0PLUS_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0U
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core MPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+#else
+        uint32_t RESERVED0;
+#endif
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 8U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  1U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   8U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0xFFFFFFUL << MPU_RBAR_ADDR_Pos)              /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M0+ header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M0+ */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+           If VTOR is not present address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+    uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm1.h b/test/Drivers/CMSIS/Include/core_cm1.h
new file mode 100644
index 0000000..fd1c407
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm1.h
@@ -0,0 +1,976 @@
+/**************************************************************************//**
+ * @file     core_cm1.h
+ * @brief    CMSIS Cortex-M1 Core Peripheral Access Layer Header File
+ * @version  V1.0.0
+ * @date     23. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM1_H_GENERIC
+#define __CORE_CM1_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M1
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM1 definitions */
+#define __CM1_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM1_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM1_CMSIS_VERSION       ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM1_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (1U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM1_H_DEPENDANT
+#define __CORE_CM1_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM1_REV
+    #define __CM1_REV               0x0100U
+    #warning "__CM1_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M1 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_ITCMUAEN_Pos            4U                                        /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMUAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos)         /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
+
+#define SCnSCB_ACTLR_ITCMLAEN_Pos            3U                                        /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMLAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos)         /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M1 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M1 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm23.h b/test/Drivers/CMSIS/Include/core_cm23.h
new file mode 100644
index 0000000..8202a8d
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm23.h
@@ -0,0 +1,1993 @@
+/**************************************************************************//**
+ * @file     core_cm23.h
+ * @brief    CMSIS Cortex-M23 Core Peripheral Access Layer Header File
+ * @version  V5.0.7
+ * @date     22. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM23_H_GENERIC
+#define __CORE_CM23_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M23
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS definitions */
+#define __CM23_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM23_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM23_CMSIS_VERSION       ((__CM23_CMSIS_VERSION_MAIN << 16U) | \
+                                     __CM23_CMSIS_VERSION_SUB           )      /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                 (23U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM23_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM23_H_DEPENDANT
+#define __CORE_CM23_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM23_REV
+    #define __CM23_REV                0x0000U
+    #warning "__CM23_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0U
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+
+  #ifndef __ETM_PRESENT
+    #define __ETM_PRESENT             0U
+    #warning "__ETM_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MTB_PRESENT
+    #define __MTB_PRESENT             0U
+    #warning "__MTB_PRESENT not defined in device header file; using default!"
+  #endif
+
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M23 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint32_t IPR[124U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+#else
+        uint32_t RESERVED0;
+#endif
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHPR[2U];               /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+        uint32_t RESERVED0[6U];
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x3UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t ITFTTD0;                /*!< Offset: 0xEEC (R/ )  Integration Test FIFO Test Data 0 Register */
+  __IOM uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/W)  Integration Test ATB Control Register 2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  Integration Test ATB Control Register 0 */
+  __IM  uint32_t ITFTTD1;                /*!< Offset: 0xEFC (R/ )  Integration Test FIFO Test Data 1 Register */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  Device Configuration Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Identifier Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration Test FIFO Test Data 0 Register Definitions */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data2_Pos      16U                                         /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */
+#define TPI_ITFTTD0_ATB_IF1_data2_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data1_Pos       8U                                         /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */
+#define TPI_ITFTTD0_ATB_IF1_data1_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data0_Pos       0U                                          /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */
+#define TPI_ITFTTD0_ATB_IF1_data0_Msk      (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 2 Register Definitions */
+#define TPI_ITATBCTR2_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID2S Position */
+#define TPI_ITATBCTR2_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos)      /*!< TPI ITATBCTR2: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR2_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID1S Position */
+#define TPI_ITATBCTR2_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos)      /*!< TPI ITATBCTR2: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR2_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY2S Position */
+#define TPI_ITATBCTR2_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY2S Mask */
+
+#define TPI_ITATBCTR2_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY1S Position */
+#define TPI_ITATBCTR2_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY1S Mask */
+
+/* TPI Integration Test FIFO Test Data 1 Register Definitions */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data2_Pos      16U                                         /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */
+#define TPI_ITFTTD1_ATB_IF2_data2_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data1_Pos       8U                                         /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */
+#define TPI_ITFTTD1_ATB_IF2_data1_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data0_Pos       0U                                          /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */
+#define TPI_ITFTTD1_ATB_IF2_data0_Msk      (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 0 Definitions */
+#define TPI_ITATBCTR0_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID2S Position */
+#define TPI_ITATBCTR0_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos)      /*!< TPI ITATBCTR0: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR0_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID1S Position */
+#define TPI_ITATBCTR0_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos)      /*!< TPI ITATBCTR0: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR0_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY2S Position */
+#define TPI_ITATBCTR0_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY2S Mask */
+
+#define TPI_ITATBCTR0_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY1S Position */
+#define TPI_ITATBCTR0_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY1S Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFOSZ Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFOSZ Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+        uint32_t RESERVED0[7U];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  1U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: EN Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: EN Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#endif
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_DWTENA_Pos         24U                                            /*!< CoreDebug DEMCR: DWTENA Position */
+#define CoreDebug_DEMCR_DWTENA_Msk         (1UL << CoreDebug_DEMCR_DWTENA_Pos)            /*!< CoreDebug DEMCR: DWTENA Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+/*#define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping   not available for Cortex-M23 */
+/*#define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping   not available for Cortex-M23 */
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */ 
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else 
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+	
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+           If VTOR is not present address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+#else
+  uint32_t *vectors = (uint32_t *)0x0U;
+#endif
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function TZ_SysTick_Config_NS is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM23_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm3.h b/test/Drivers/CMSIS/Include/core_cm3.h
new file mode 100644
index 0000000..b0dfbd3
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm3.h
@@ -0,0 +1,1941 @@
+/**************************************************************************//**
+ * @file     core_cm3.h
+ * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version  V5.0.8
+ * @date     04. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M3
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION       ((__CM3_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM3_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (3U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM3_REV
+    #define __CM3_REV               0x0200U
+    #warning "__CM3_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t _reserved1:8;               /*!< bit: 16..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[8U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[24U];
+  __IOM uint32_t ICER[8U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[24U];
+  __IOM uint32_t ISPR[8U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[24U];
+  __IOM uint32_t ICPR[8U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[24U];
+  __IOM uint32_t IABR[8U];               /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[56U];
+  __IOM uint8_t  IP[240U];               /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED5[644U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHP[12U];               /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t PFR[2U];                /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t DFR;                    /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ADR;                    /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t MMFR[4U];               /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ISAR[5U];               /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+        uint32_t RESERVED0[5U];
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if defined (__CM3_REV) && (__CM3_REV < 0x0201U)                   /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos               29U                                            /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk               (1UL << SCB_VTOR_TBLBASE_Pos)                  /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0U                                            /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0U                                            /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+#if defined (__CM3_REV) && (__CM3_REV >= 0x200U)
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+#else
+        uint32_t RESERVED1[1U];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2U                                         /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos         1U                                         /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk        (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos)        /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0U                                         /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[6U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8U                                            /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+  __IOM uint32_t MASK0;                  /*!< Offset: 0x024 (R/W)  Mask Register 0 */
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+  __IOM uint32_t MASK1;                  /*!< Offset: 0x034 (R/W)  Mask Register 1 */
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+  __IOM uint32_t MASK2;                  /*!< Offset: 0x044 (R/W)  Mask Register 2 */
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+  __IOM uint32_t MASK3;                  /*!< Offset: 0x054 (R/W)  Mask Register 3 */
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0U                                         /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16U                                         /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12U                                         /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9U                                         /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8U                                         /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7U                                         /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5U                                         /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0U                                         /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __IM  uint32_t FIFO1;                  /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16U                                         /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8U                                         /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0U                                         /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16U                                         /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8U                                         /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0U                                         /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6U                                         /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5U                                         /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register */
+  __IOM uint32_t RASR_A1;                /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register */
+  __IOM uint32_t RASR_A2;                /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register */
+  __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   5U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+   #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) );               /* Insert write key and priority group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm33.h b/test/Drivers/CMSIS/Include/core_cm33.h
new file mode 100644
index 0000000..02f82e2
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm33.h
@@ -0,0 +1,3002 @@
+/**************************************************************************//**
+ * @file     core_cm33.h
+ * @brief    CMSIS Cortex-M33 Core Peripheral Access Layer Header File
+ * @version  V5.0.9
+ * @date     06. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM33_H_GENERIC
+#define __CORE_CM33_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M33
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS CM33 definitions */
+#define __CM33_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                   /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM33_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                    /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM33_CMSIS_VERSION       ((__CM33_CMSIS_VERSION_MAIN << 16U) | \
+                                     __CM33_CMSIS_VERSION_SUB           )      /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                 (33U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined (__TARGET_FPU_VFP)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined (__ARM_PCS_VFP)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined (__ARMVFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+  #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U)
+    #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U)
+      #define __DSP_USED       1U
+    #else
+      #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)"
+      #define __DSP_USED         0U
+    #endif
+  #else
+    #define __DSP_USED         0U
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined (__TI_VFP_SUPPORT__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined (__FPU_VFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM33_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM33_H_DEPENDANT
+#define __CORE_CM33_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM33_REV
+    #define __CM33_REV                0x0000U
+    #warning "__CM33_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __SAUREGION_PRESENT
+    #define __SAUREGION_PRESENT       0U
+    #warning "__SAUREGION_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DSP_PRESENT
+    #define __DSP_PRESENT             0U
+    #warning "__DSP_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M33 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core SAU Register
+  - Core FPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16U                                            /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0) */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25U                                            /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack-pointer select */
+    uint32_t FPCA:1;                     /*!< bit:      2  Floating-point context active */
+    uint32_t SFPA:1;                     /*!< bit:      3  Secure floating-point active */
+    uint32_t _reserved1:28;              /*!< bit:  4..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SFPA_Pos                    3U                                            /*!< CONTROL: SFPA Position */
+#define CONTROL_SFPA_Msk                   (1UL << CONTROL_SFPA_Pos)                      /*!< CONTROL: SFPA Mask */
+
+#define CONTROL_FPCA_Pos                    2U                                            /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[16U];              /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[16U];
+  __IOM uint32_t ICER[16U];              /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[16U];
+  __IOM uint32_t ISPR[16U];              /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[16U];
+  __IOM uint32_t ICPR[16U];              /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[16U];
+  __IOM uint32_t IABR[16U];              /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[16U];
+  __IOM uint32_t ITNS[16U];              /*!< Offset: 0x280 (R/W)  Interrupt Non-Secure State Register */
+        uint32_t RESERVED5[16U];
+  __IOM uint8_t  IPR[496U];              /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED6[580U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHPR[12U];              /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t ID_PFR[2U];             /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t ID_DFR;                 /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ID_ADR;                 /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t ID_MMFR[4U];            /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ID_ISAR[6U];            /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+  __IM  uint32_t CLIDR;                  /*!< Offset: 0x078 (R/ )  Cache Level ID register */
+  __IM  uint32_t CTR;                    /*!< Offset: 0x07C (R/ )  Cache Type register */
+  __IM  uint32_t CCSIDR;                 /*!< Offset: 0x080 (R/ )  Cache Size ID Register */
+  __IOM uint32_t CSSELR;                 /*!< Offset: 0x084 (R/W)  Cache Size Selection Register */
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+  __IOM uint32_t NSACR;                  /*!< Offset: 0x08C (R/W)  Non-Secure Access Control Register */
+        uint32_t RESERVED3[92U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0x200 ( /W)  Software Triggered Interrupt Register */
+        uint32_t RESERVED4[15U];
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x240 (R/ )  Media and VFP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x244 (R/ )  Media and VFP Feature Register 1 */
+  __IM  uint32_t MVFR2;                  /*!< Offset: 0x248 (R/ )  Media and VFP Feature Register 2 */
+        uint32_t RESERVED5[1U];
+  __OM  uint32_t ICIALLU;                /*!< Offset: 0x250 ( /W)  I-Cache Invalidate All to PoU */
+        uint32_t RESERVED6[1U];
+  __OM  uint32_t ICIMVAU;                /*!< Offset: 0x258 ( /W)  I-Cache Invalidate by MVA to PoU */
+  __OM  uint32_t DCIMVAC;                /*!< Offset: 0x25C ( /W)  D-Cache Invalidate by MVA to PoC */
+  __OM  uint32_t DCISW;                  /*!< Offset: 0x260 ( /W)  D-Cache Invalidate by Set-way */
+  __OM  uint32_t DCCMVAU;                /*!< Offset: 0x264 ( /W)  D-Cache Clean by MVA to PoU */
+  __OM  uint32_t DCCMVAC;                /*!< Offset: 0x268 ( /W)  D-Cache Clean by MVA to PoC */
+  __OM  uint32_t DCCSW;                  /*!< Offset: 0x26C ( /W)  D-Cache Clean by Set-way */
+  __OM  uint32_t DCCIMVAC;               /*!< Offset: 0x270 ( /W)  D-Cache Clean and Invalidate by MVA to PoC */
+  __OM  uint32_t DCCISW;                 /*!< Offset: 0x274 ( /W)  D-Cache Clean and Invalidate by Set-way */
+        uint32_t RESERVED7[6U];
+  __IOM uint32_t ITCMCR;                 /*!< Offset: 0x290 (R/W)  Instruction Tightly-Coupled Memory Control Register */
+  __IOM uint32_t DTCMCR;                 /*!< Offset: 0x294 (R/W)  Data Tightly-Coupled Memory Control Registers */
+  __IOM uint32_t AHBPCR;                 /*!< Offset: 0x298 (R/W)  AHBP Control Register */
+  __IOM uint32_t CACR;                   /*!< Offset: 0x29C (R/W)  L1 Cache Control Register */
+  __IOM uint32_t AHBSCR;                 /*!< Offset: 0x2A0 (R/W)  AHB Slave Control Register */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t ABFSR;                  /*!< Offset: 0x2A8 (R/W)  Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_PENDNMISET_Pos            31U                                            /*!< SCB ICSR: PENDNMISET Position */
+#define SCB_ICSR_PENDNMISET_Msk            (1UL << SCB_ICSR_PENDNMISET_Pos)               /*!< SCB ICSR: PENDNMISET Mask */
+
+#define SCB_ICSR_NMIPENDSET_Pos            SCB_ICSR_PENDNMISET_Pos                        /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */
+#define SCB_ICSR_NMIPENDSET_Msk            SCB_ICSR_PENDNMISET_Msk                        /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */
+
+#define SCB_ICSR_PENDNMICLR_Pos            30U                                            /*!< SCB ICSR: PENDNMICLR Position */
+#define SCB_ICSR_PENDNMICLR_Msk            (1UL << SCB_ICSR_PENDNMICLR_Pos)               /*!< SCB ICSR: PENDNMICLR Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_STTNS_Pos                 24U                                            /*!< SCB ICSR: STTNS Position (Security Extension) */
+#define SCB_ICSR_STTNS_Msk                 (1UL << SCB_ICSR_STTNS_Pos)                    /*!< SCB ICSR: STTNS Mask (Security Extension) */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIS_Pos                 14U                                            /*!< SCB AIRCR: PRIS Position */
+#define SCB_AIRCR_PRIS_Msk                 (1UL << SCB_AIRCR_PRIS_Pos)                    /*!< SCB AIRCR: PRIS Mask */
+
+#define SCB_AIRCR_BFHFNMINS_Pos            13U                                            /*!< SCB AIRCR: BFHFNMINS Position */
+#define SCB_AIRCR_BFHFNMINS_Msk            (1UL << SCB_AIRCR_BFHFNMINS_Pos)               /*!< SCB AIRCR: BFHFNMINS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQS_Pos          3U                                            /*!< SCB AIRCR: SYSRESETREQS Position */
+#define SCB_AIRCR_SYSRESETREQS_Msk         (1UL << SCB_AIRCR_SYSRESETREQS_Pos)            /*!< SCB AIRCR: SYSRESETREQS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEPS_Pos              3U                                            /*!< SCB SCR: SLEEPDEEPS Position */
+#define SCB_SCR_SLEEPDEEPS_Msk             (1UL << SCB_SCR_SLEEPDEEPS_Pos)                /*!< SCB SCR: SLEEPDEEPS Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                     18U                                            /*!< SCB CCR: BP Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: BP Mask */
+
+#define SCB_CCR_IC_Pos                     17U                                            /*!< SCB CCR: IC Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: IC Mask */
+
+#define SCB_CCR_DC_Pos                     16U                                            /*!< SCB CCR: DC Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: DC Mask */
+
+#define SCB_CCR_STKOFHFNMIGN_Pos           10U                                            /*!< SCB CCR: STKOFHFNMIGN Position */
+#define SCB_CCR_STKOFHFNMIGN_Msk           (1UL << SCB_CCR_STKOFHFNMIGN_Pos)              /*!< SCB CCR: STKOFHFNMIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_HARDFAULTPENDED_Pos      21U                                            /*!< SCB SHCSR: HARDFAULTPENDED Position */
+#define SCB_SHCSR_HARDFAULTPENDED_Msk      (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos)         /*!< SCB SHCSR: HARDFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTPENDED_Pos    20U                                            /*!< SCB SHCSR: SECUREFAULTPENDED Position */
+#define SCB_SHCSR_SECUREFAULTPENDED_Msk    (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos)       /*!< SCB SHCSR: SECUREFAULTPENDED Mask */
+
+#define SCB_SHCSR_SECUREFAULTENA_Pos       19U                                            /*!< SCB SHCSR: SECUREFAULTENA Position */
+#define SCB_SHCSR_SECUREFAULTENA_Msk       (1UL << SCB_SHCSR_SECUREFAULTENA_Pos)          /*!< SCB SHCSR: SECUREFAULTENA Mask */
+
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_NMIACT_Pos                5U                                            /*!< SCB SHCSR: NMIACT Position */
+#define SCB_SHCSR_NMIACT_Msk               (1UL << SCB_SHCSR_NMIACT_Pos)                  /*!< SCB SHCSR: NMIACT Mask */
+
+#define SCB_SHCSR_SECUREFAULTACT_Pos        4U                                            /*!< SCB SHCSR: SECUREFAULTACT Position */
+#define SCB_SHCSR_SECUREFAULTACT_Msk       (1UL << SCB_SHCSR_SECUREFAULTACT_Pos)          /*!< SCB SHCSR: SECUREFAULTACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_HARDFAULTACT_Pos          2U                                            /*!< SCB SHCSR: HARDFAULTACT Position */
+#define SCB_SHCSR_HARDFAULTACT_Msk         (1UL << SCB_SHCSR_HARDFAULTACT_Pos)            /*!< SCB SHCSR: HARDFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_STKOF_Pos                (SCB_CFSR_USGFAULTSR_Pos + 4U)                  /*!< SCB CFSR (UFSR): STKOF Position */
+#define SCB_CFSR_STKOF_Msk                (1UL << SCB_CFSR_STKOF_Pos)                     /*!< SCB CFSR (UFSR): STKOF Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Non-Secure Access Control Register Definitions */
+#define SCB_NSACR_CP11_Pos                 11U                                            /*!< SCB NSACR: CP11 Position */
+#define SCB_NSACR_CP11_Msk                 (1UL << SCB_NSACR_CP11_Pos)                    /*!< SCB NSACR: CP11 Mask */
+
+#define SCB_NSACR_CP10_Pos                 10U                                            /*!< SCB NSACR: CP10 Position */
+#define SCB_NSACR_CP10_Msk                 (1UL << SCB_NSACR_CP10_Pos)                    /*!< SCB NSACR: CP10 Mask */
+
+#define SCB_NSACR_CPn_Pos                   0U                                            /*!< SCB NSACR: CPn Position */
+#define SCB_NSACR_CPn_Msk                  (1UL /*<< SCB_NSACR_CPn_Pos*/)                 /*!< SCB NSACR: CPn Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos                 27U                                            /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk                 (7UL << SCB_CLIDR_LOUU_Pos)                    /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos                  24U                                            /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk                  (7UL << SCB_CLIDR_LOC_Pos)                     /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos                 29U                                            /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk                 (7UL << SCB_CTR_FORMAT_Pos)                    /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos                    24U                                            /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk                    (0xFUL << SCB_CTR_CWG_Pos)                     /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos                    20U                                            /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk                    (0xFUL << SCB_CTR_ERG_Pos)                     /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos               16U                                            /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk               (0xFUL << SCB_CTR_DMINLINE_Pos)                /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos                0U                                            /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk               (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/)            /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos                  31U                                            /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk                  (1UL << SCB_CCSIDR_WT_Pos)                     /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos                  30U                                            /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk                  (1UL << SCB_CCSIDR_WB_Pos)                     /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos                  29U                                            /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk                  (1UL << SCB_CCSIDR_RA_Pos)                     /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos                  28U                                            /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk                  (1UL << SCB_CCSIDR_WA_Pos)                     /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos             13U                                            /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk             (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos)           /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos        3U                                            /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk       (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos)      /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos             0U                                            /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk            (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/)           /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos                1U                                            /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk               (7UL << SCB_CSSELR_LEVEL_Pos)                  /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos                  0U                                            /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk                 (1UL /*<< SCB_CSSELR_IND_Pos*/)                /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos                  0U                                            /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk                 (0x1FFUL /*<< SCB_STIR_INTID_Pos*/)            /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos                  30U                                            /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk                  (3UL << SCB_DCISW_WAY_Pos)                     /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos                   5U                                            /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk                  (0x1FFUL << SCB_DCISW_SET_Pos)                 /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos                  30U                                            /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk                  (3UL << SCB_DCCSW_WAY_Pos)                     /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos                   5U                                            /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk                  (0x1FFUL << SCB_DCCSW_SET_Pos)                 /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos                 30U                                            /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk                 (3UL << SCB_DCCISW_WAY_Pos)                    /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos                  5U                                            /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk                 (0x1FFUL << SCB_DCCISW_SET_Pos)                /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos                   3U                                            /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk                  (0xFUL << SCB_ITCMCR_SZ_Pos)                   /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos                2U                                            /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk               (1UL << SCB_ITCMCR_RETEN_Pos)                  /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos                  1U                                            /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk                 (1UL << SCB_ITCMCR_RMW_Pos)                    /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos                   0U                                            /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk                  (1UL /*<< SCB_ITCMCR_EN_Pos*/)                 /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos                   3U                                            /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk                  (0xFUL << SCB_DTCMCR_SZ_Pos)                   /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos                2U                                            /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk               (1UL << SCB_DTCMCR_RETEN_Pos)                   /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos                  1U                                            /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk                 (1UL << SCB_DTCMCR_RMW_Pos)                    /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos                   0U                                            /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk                  (1UL /*<< SCB_DTCMCR_EN_Pos*/)                 /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos                   1U                                            /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk                  (7UL << SCB_AHBPCR_SZ_Pos)                     /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos                   0U                                            /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk                  (1UL /*<< SCB_AHBPCR_EN_Pos*/)                 /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos                2U                                            /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk               (1UL << SCB_CACR_FORCEWT_Pos)                  /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos                  1U                                            /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk                 (1UL << SCB_CACR_ECCEN_Pos)                    /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos                   0U                                            /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk                  (1UL /*<< SCB_CACR_SIWT_Pos*/)                 /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos           11U                                            /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk           (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos)           /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos                 2U                                            /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk                (0x1FFUL << SCB_AHBPCR_TPRI_Pos)               /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos                  0U                                            /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk                 (3UL /*<< SCB_AHBPCR_CTL_Pos*/)                /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos              8U                                            /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk             (3UL << SCB_ABFSR_AXIMTYPE_Pos)                /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos                  4U                                            /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk                 (1UL << SCB_ABFSR_EPPB_Pos)                    /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos                  3U                                            /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk                 (1UL << SCB_ABFSR_AXIM_Pos)                    /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos                  2U                                            /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk                 (1UL << SCB_ABFSR_AHBP_Pos)                    /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos                  1U                                            /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk                 (1UL << SCB_ABFSR_DTCM_Pos)                    /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos                  0U                                            /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk                 (1UL /*<< SCB_ABFSR_ITCM_Pos*/)                /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+  __IOM uint32_t CPPWR;                  /*!< Offset: 0x00C (R/W)  Coprocessor Power Control  Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  ITM Device Architecture Register */
+        uint32_t RESERVED6[4U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Stimulus Port Register Definitions */
+#define ITM_STIM_DISABLED_Pos               1U                                            /*!< ITM STIM: DISABLED Position */
+#define ITM_STIM_DISABLED_Msk              (0x1UL << ITM_STIM_DISABLED_Pos)               /*!< ITM STIM: DISABLED Mask */
+
+#define ITM_STIM_FIFOREADY_Pos              0U                                            /*!< ITM STIM: FIFOREADY Position */
+#define ITM_STIM_FIFOREADY_Msk             (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/)          /*!< ITM STIM: FIFOREADY Mask */
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TRACEBUSID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TRACEBUSID_Msk             (0x7FUL << ITM_TCR_TRACEBUSID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPRESCALE_Pos              8U                                            /*!< ITM TCR: TSPRESCALE Position */
+#define ITM_TCR_TSPRESCALE_Msk             (3UL << ITM_TCR_TSPRESCALE_Pos)                /*!< ITM TCR: TSPRESCALE Mask */
+
+#define ITM_TCR_STALLENA_Pos                5U                                            /*!< ITM TCR: STALLENA Position */
+#define ITM_TCR_STALLENA_Msk               (1UL << ITM_TCR_STALLENA_Pos)                  /*!< ITM TCR: STALLENA Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+        uint32_t RESERVED3[1U];
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+        uint32_t RESERVED5[1U];
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED6[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+        uint32_t RESERVED7[1U];
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t COMP4;                  /*!< Offset: 0x060 (R/W)  Comparator Register 4 */
+        uint32_t RESERVED9[1U];
+  __IOM uint32_t FUNCTION4;              /*!< Offset: 0x068 (R/W)  Function Register 4 */
+        uint32_t RESERVED10[1U];
+  __IOM uint32_t COMP5;                  /*!< Offset: 0x070 (R/W)  Comparator Register 5 */
+        uint32_t RESERVED11[1U];
+  __IOM uint32_t FUNCTION5;              /*!< Offset: 0x078 (R/W)  Function Register 5 */
+        uint32_t RESERVED12[1U];
+  __IOM uint32_t COMP6;                  /*!< Offset: 0x080 (R/W)  Comparator Register 6 */
+        uint32_t RESERVED13[1U];
+  __IOM uint32_t FUNCTION6;              /*!< Offset: 0x088 (R/W)  Function Register 6 */
+        uint32_t RESERVED14[1U];
+  __IOM uint32_t COMP7;                  /*!< Offset: 0x090 (R/W)  Comparator Register 7 */
+        uint32_t RESERVED15[1U];
+  __IOM uint32_t FUNCTION7;              /*!< Offset: 0x098 (R/W)  Function Register 7 */
+        uint32_t RESERVED16[1U];
+  __IOM uint32_t COMP8;                  /*!< Offset: 0x0A0 (R/W)  Comparator Register 8 */
+        uint32_t RESERVED17[1U];
+  __IOM uint32_t FUNCTION8;              /*!< Offset: 0x0A8 (R/W)  Function Register 8 */
+        uint32_t RESERVED18[1U];
+  __IOM uint32_t COMP9;                  /*!< Offset: 0x0B0 (R/W)  Comparator Register 9 */
+        uint32_t RESERVED19[1U];
+  __IOM uint32_t FUNCTION9;              /*!< Offset: 0x0B8 (R/W)  Function Register 9 */
+        uint32_t RESERVED20[1U];
+  __IOM uint32_t COMP10;                 /*!< Offset: 0x0C0 (R/W)  Comparator Register 10 */
+        uint32_t RESERVED21[1U];
+  __IOM uint32_t FUNCTION10;             /*!< Offset: 0x0C8 (R/W)  Function Register 10 */
+        uint32_t RESERVED22[1U];
+  __IOM uint32_t COMP11;                 /*!< Offset: 0x0D0 (R/W)  Comparator Register 11 */
+        uint32_t RESERVED23[1U];
+  __IOM uint32_t FUNCTION11;             /*!< Offset: 0x0D8 (R/W)  Function Register 11 */
+        uint32_t RESERVED24[1U];
+  __IOM uint32_t COMP12;                 /*!< Offset: 0x0E0 (R/W)  Comparator Register 12 */
+        uint32_t RESERVED25[1U];
+  __IOM uint32_t FUNCTION12;             /*!< Offset: 0x0E8 (R/W)  Function Register 12 */
+        uint32_t RESERVED26[1U];
+  __IOM uint32_t COMP13;                 /*!< Offset: 0x0F0 (R/W)  Comparator Register 13 */
+        uint32_t RESERVED27[1U];
+  __IOM uint32_t FUNCTION13;             /*!< Offset: 0x0F8 (R/W)  Function Register 13 */
+        uint32_t RESERVED28[1U];
+  __IOM uint32_t COMP14;                 /*!< Offset: 0x100 (R/W)  Comparator Register 14 */
+        uint32_t RESERVED29[1U];
+  __IOM uint32_t FUNCTION14;             /*!< Offset: 0x108 (R/W)  Function Register 14 */
+        uint32_t RESERVED30[1U];
+  __IOM uint32_t COMP15;                 /*!< Offset: 0x110 (R/W)  Comparator Register 15 */
+        uint32_t RESERVED31[1U];
+  __IOM uint32_t FUNCTION15;             /*!< Offset: 0x118 (R/W)  Function Register 15 */
+        uint32_t RESERVED32[934U];
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R  )  Lock Status Register */
+        uint32_t RESERVED33[1U];
+  __IM  uint32_t DEVARCH;                /*!< Offset: 0xFBC (R/ )  Device Architecture Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCDISS_Pos               23U                                         /*!< DWT CTRL: CYCDISS Position */
+#define DWT_CTRL_CYCDISS_Msk               (0x1UL << DWT_CTRL_CYCDISS_Pos)             /*!< DWT CTRL: CYCDISS Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_ID_Pos                27U                                         /*!< DWT FUNCTION: ID Position */
+#define DWT_FUNCTION_ID_Msk                (0x1FUL << DWT_FUNCTION_ID_Pos)             /*!< DWT FUNCTION: ID Mask */
+
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_ACTION_Pos             4U                                         /*!< DWT FUNCTION: ACTION Position */
+#define DWT_FUNCTION_ACTION_Msk            (0x1UL << DWT_FUNCTION_ACTION_Pos)          /*!< DWT FUNCTION: ACTION Mask */
+
+#define DWT_FUNCTION_MATCH_Pos              0U                                         /*!< DWT FUNCTION: MATCH Position */
+#define DWT_FUNCTION_MATCH_Msk             (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/)       /*!< DWT FUNCTION: MATCH Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IOM uint32_t PSCR;                   /*!< Offset: 0x308 (R/W)  Periodic Synchronization Control Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t ITFTTD0;                /*!< Offset: 0xEEC (R/ )  Integration Test FIFO Test Data 0 Register */
+  __IOM uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/W)  Integration Test ATB Control Register 2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  Integration Test ATB Control Register 0 */
+  __IM  uint32_t ITFTTD1;                /*!< Offset: 0xEFC (R/ )  Integration Test FIFO Test Data 1 Register */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  Device Configuration Register */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  Device Type Identifier Register */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_FOnMan_Pos                 6U                                         /*!< TPI FFCR: FOnMan Position */
+#define TPI_FFCR_FOnMan_Msk                (0x1UL << TPI_FFCR_FOnMan_Pos)              /*!< TPI FFCR: FOnMan Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration Test FIFO Test Data 0 Register Definitions */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */
+#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data2_Pos      16U                                         /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */
+#define TPI_ITFTTD0_ATB_IF1_data2_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data1_Pos       8U                                         /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */
+#define TPI_ITFTTD0_ATB_IF1_data1_Msk      (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos)   /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */
+
+#define TPI_ITFTTD0_ATB_IF1_data0_Pos       0U                                          /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */
+#define TPI_ITFTTD0_ATB_IF1_data0_Msk      (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 2 Register Definitions */
+#define TPI_ITATBCTR2_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID2S Position */
+#define TPI_ITATBCTR2_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos)      /*!< TPI ITATBCTR2: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR2_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR2: AFVALID1S Position */
+#define TPI_ITATBCTR2_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos)      /*!< TPI ITATBCTR2: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR2_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY2S Position */
+#define TPI_ITATBCTR2_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY2S Mask */
+
+#define TPI_ITATBCTR2_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR2: ATREADY1S Position */
+#define TPI_ITATBCTR2_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR2: ATREADY1S Mask */
+
+/* TPI Integration Test FIFO Test Data 1 Register Definitions */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos    29U                                         /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos  27U                                         /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */
+#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos    26U                                         /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */
+#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk    (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos)  /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */
+
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos  24U                                         /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */
+#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk  (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data2_Pos      16U                                         /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */
+#define TPI_ITFTTD1_ATB_IF2_data2_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data1_Pos       8U                                         /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */
+#define TPI_ITFTTD1_ATB_IF2_data1_Msk      (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos)   /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */
+
+#define TPI_ITFTTD1_ATB_IF2_data0_Pos       0U                                          /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */
+#define TPI_ITFTTD1_ATB_IF2_data0_Msk      (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */
+
+/* TPI Integration Test ATB Control Register 0 Definitions */
+#define TPI_ITATBCTR0_AFVALID2S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID2S Position */
+#define TPI_ITATBCTR0_AFVALID2S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos)      /*!< TPI ITATBCTR0: AFVALID2SS Mask */
+
+#define TPI_ITATBCTR0_AFVALID1S_Pos         1U                                         /*!< TPI ITATBCTR0: AFVALID1S Position */
+#define TPI_ITATBCTR0_AFVALID1S_Msk        (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos)      /*!< TPI ITATBCTR0: AFVALID1SS Mask */
+
+#define TPI_ITATBCTR0_ATREADY2S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY2S Position */
+#define TPI_ITATBCTR0_ATREADY2S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY2S Mask */
+
+#define TPI_ITATBCTR0_ATREADY1S_Pos         0U                                         /*!< TPI ITATBCTR0: ATREADY1S Position */
+#define TPI_ITATBCTR0_ATREADY1S_Msk        (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/)  /*!< TPI ITATBCTR0: ATREADY1S Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_FIFOSZ_Pos                6U                                         /*!< TPI DEVID: FIFOSZ Position */
+#define TPI_DEVID_FIFOSZ_Msk               (0x7UL << TPI_DEVID_FIFOSZ_Pos)             /*!< TPI DEVID: FIFOSZ Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  MPU Region Limit Address Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Region Base Address Register Alias 1 */
+  __IOM uint32_t RLAR_A1;                /*!< Offset: 0x018 (R/W)  MPU Region Limit Address Register Alias 1 */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Region Base Address Register Alias 2 */
+  __IOM uint32_t RLAR_A2;                /*!< Offset: 0x020 (R/W)  MPU Region Limit Address Register Alias 2 */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Region Base Address Register Alias 3 */
+  __IOM uint32_t RLAR_A3;                /*!< Offset: 0x028 (R/W)  MPU Region Limit Address Register Alias 3 */
+        uint32_t RESERVED0[1];
+  union {
+  __IOM uint32_t MAIR[2];
+  struct {
+  __IOM uint32_t MAIR0;                  /*!< Offset: 0x030 (R/W)  MPU Memory Attribute Indirection Register 0 */
+  __IOM uint32_t MAIR1;                  /*!< Offset: 0x034 (R/W)  MPU Memory Attribute Indirection Register 1 */
+  };
+  };
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_BASE_Pos                   5U                                            /*!< MPU RBAR: BASE Position */
+#define MPU_RBAR_BASE_Msk                  (0x7FFFFFFUL << MPU_RBAR_BASE_Pos)             /*!< MPU RBAR: BASE Mask */
+
+#define MPU_RBAR_SH_Pos                     3U                                            /*!< MPU RBAR: SH Position */
+#define MPU_RBAR_SH_Msk                    (0x3UL << MPU_RBAR_SH_Pos)                     /*!< MPU RBAR: SH Mask */
+
+#define MPU_RBAR_AP_Pos                     1U                                            /*!< MPU RBAR: AP Position */
+#define MPU_RBAR_AP_Msk                    (0x3UL << MPU_RBAR_AP_Pos)                     /*!< MPU RBAR: AP Mask */
+
+#define MPU_RBAR_XN_Pos                     0U                                            /*!< MPU RBAR: XN Position */
+#define MPU_RBAR_XN_Msk                    (01UL /*<< MPU_RBAR_XN_Pos*/)                  /*!< MPU RBAR: XN Mask */
+
+/* MPU Region Limit Address Register Definitions */
+#define MPU_RLAR_LIMIT_Pos                  5U                                            /*!< MPU RLAR: LIMIT Position */
+#define MPU_RLAR_LIMIT_Msk                 (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos)            /*!< MPU RLAR: LIMIT Mask */
+
+#define MPU_RLAR_AttrIndx_Pos               1U                                            /*!< MPU RLAR: AttrIndx Position */
+#define MPU_RLAR_AttrIndx_Msk              (0x7UL << MPU_RLAR_AttrIndx_Pos)               /*!< MPU RLAR: AttrIndx Mask */
+
+#define MPU_RLAR_EN_Pos                     0U                                            /*!< MPU RLAR: Region enable bit Position */
+#define MPU_RLAR_EN_Msk                    (1UL /*<< MPU_RLAR_EN_Pos*/)                   /*!< MPU RLAR: Region enable bit Disable Mask */
+
+/* MPU Memory Attribute Indirection Register 0 Definitions */
+#define MPU_MAIR0_Attr3_Pos                24U                                            /*!< MPU MAIR0: Attr3 Position */
+#define MPU_MAIR0_Attr3_Msk                (0xFFUL << MPU_MAIR0_Attr3_Pos)                /*!< MPU MAIR0: Attr3 Mask */
+
+#define MPU_MAIR0_Attr2_Pos                16U                                            /*!< MPU MAIR0: Attr2 Position */
+#define MPU_MAIR0_Attr2_Msk                (0xFFUL << MPU_MAIR0_Attr2_Pos)                /*!< MPU MAIR0: Attr2 Mask */
+
+#define MPU_MAIR0_Attr1_Pos                 8U                                            /*!< MPU MAIR0: Attr1 Position */
+#define MPU_MAIR0_Attr1_Msk                (0xFFUL << MPU_MAIR0_Attr1_Pos)                /*!< MPU MAIR0: Attr1 Mask */
+
+#define MPU_MAIR0_Attr0_Pos                 0U                                            /*!< MPU MAIR0: Attr0 Position */
+#define MPU_MAIR0_Attr0_Msk                (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/)            /*!< MPU MAIR0: Attr0 Mask */
+
+/* MPU Memory Attribute Indirection Register 1 Definitions */
+#define MPU_MAIR1_Attr7_Pos                24U                                            /*!< MPU MAIR1: Attr7 Position */
+#define MPU_MAIR1_Attr7_Msk                (0xFFUL << MPU_MAIR1_Attr7_Pos)                /*!< MPU MAIR1: Attr7 Mask */
+
+#define MPU_MAIR1_Attr6_Pos                16U                                            /*!< MPU MAIR1: Attr6 Position */
+#define MPU_MAIR1_Attr6_Msk                (0xFFUL << MPU_MAIR1_Attr6_Pos)                /*!< MPU MAIR1: Attr6 Mask */
+
+#define MPU_MAIR1_Attr5_Pos                 8U                                            /*!< MPU MAIR1: Attr5 Position */
+#define MPU_MAIR1_Attr5_Msk                (0xFFUL << MPU_MAIR1_Attr5_Pos)                /*!< MPU MAIR1: Attr5 Mask */
+
+#define MPU_MAIR1_Attr4_Pos                 0U                                            /*!< MPU MAIR1: Attr4 Position */
+#define MPU_MAIR1_Attr4_Msk                (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/)            /*!< MPU MAIR1: Attr4 Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SAU     Security Attribution Unit (SAU)
+  \brief    Type definitions for the Security Attribution Unit (SAU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Security Attribution Unit (SAU).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SAU Control Register */
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x004 (R/ )  SAU Type Register */
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  SAU Region Number Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  SAU Region Base Address Register */
+  __IOM uint32_t RLAR;                   /*!< Offset: 0x010 (R/W)  SAU Region Limit Address Register */
+#else
+        uint32_t RESERVED0[3];
+#endif
+  __IOM uint32_t SFSR;                   /*!< Offset: 0x014 (R/W)  Secure Fault Status Register */
+  __IOM uint32_t SFAR;                   /*!< Offset: 0x018 (R/W)  Secure Fault Address Register */
+} SAU_Type;
+
+/* SAU Control Register Definitions */
+#define SAU_CTRL_ALLNS_Pos                  1U                                            /*!< SAU CTRL: ALLNS Position */
+#define SAU_CTRL_ALLNS_Msk                 (1UL << SAU_CTRL_ALLNS_Pos)                    /*!< SAU CTRL: ALLNS Mask */
+
+#define SAU_CTRL_ENABLE_Pos                 0U                                            /*!< SAU CTRL: ENABLE Position */
+#define SAU_CTRL_ENABLE_Msk                (1UL /*<< SAU_CTRL_ENABLE_Pos*/)               /*!< SAU CTRL: ENABLE Mask */
+
+/* SAU Type Register Definitions */
+#define SAU_TYPE_SREGION_Pos                0U                                            /*!< SAU TYPE: SREGION Position */
+#define SAU_TYPE_SREGION_Msk               (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/)           /*!< SAU TYPE: SREGION Mask */
+
+#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U)
+/* SAU Region Number Register Definitions */
+#define SAU_RNR_REGION_Pos                  0U                                            /*!< SAU RNR: REGION Position */
+#define SAU_RNR_REGION_Msk                 (0xFFUL /*<< SAU_RNR_REGION_Pos*/)             /*!< SAU RNR: REGION Mask */
+
+/* SAU Region Base Address Register Definitions */
+#define SAU_RBAR_BADDR_Pos                  5U                                            /*!< SAU RBAR: BADDR Position */
+#define SAU_RBAR_BADDR_Msk                 (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos)            /*!< SAU RBAR: BADDR Mask */
+
+/* SAU Region Limit Address Register Definitions */
+#define SAU_RLAR_LADDR_Pos                  5U                                            /*!< SAU RLAR: LADDR Position */
+#define SAU_RLAR_LADDR_Msk                 (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos)            /*!< SAU RLAR: LADDR Mask */
+
+#define SAU_RLAR_NSC_Pos                    1U                                            /*!< SAU RLAR: NSC Position */
+#define SAU_RLAR_NSC_Msk                   (1UL << SAU_RLAR_NSC_Pos)                      /*!< SAU RLAR: NSC Mask */
+
+#define SAU_RLAR_ENABLE_Pos                 0U                                            /*!< SAU RLAR: ENABLE Position */
+#define SAU_RLAR_ENABLE_Msk                (1UL /*<< SAU_RLAR_ENABLE_Pos*/)               /*!< SAU RLAR: ENABLE Mask */
+
+#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */
+
+/* Secure Fault Status Register Definitions */
+#define SAU_SFSR_LSERR_Pos                  7U                                            /*!< SAU SFSR: LSERR Position */
+#define SAU_SFSR_LSERR_Msk                 (1UL << SAU_SFSR_LSERR_Pos)                    /*!< SAU SFSR: LSERR Mask */
+
+#define SAU_SFSR_SFARVALID_Pos              6U                                            /*!< SAU SFSR: SFARVALID Position */
+#define SAU_SFSR_SFARVALID_Msk             (1UL << SAU_SFSR_SFARVALID_Pos)                /*!< SAU SFSR: SFARVALID Mask */
+
+#define SAU_SFSR_LSPERR_Pos                 5U                                            /*!< SAU SFSR: LSPERR Position */
+#define SAU_SFSR_LSPERR_Msk                (1UL << SAU_SFSR_LSPERR_Pos)                   /*!< SAU SFSR: LSPERR Mask */
+
+#define SAU_SFSR_INVTRAN_Pos                4U                                            /*!< SAU SFSR: INVTRAN Position */
+#define SAU_SFSR_INVTRAN_Msk               (1UL << SAU_SFSR_INVTRAN_Pos)                  /*!< SAU SFSR: INVTRAN Mask */
+
+#define SAU_SFSR_AUVIOL_Pos                 3U                                            /*!< SAU SFSR: AUVIOL Position */
+#define SAU_SFSR_AUVIOL_Msk                (1UL << SAU_SFSR_AUVIOL_Pos)                   /*!< SAU SFSR: AUVIOL Mask */
+
+#define SAU_SFSR_INVER_Pos                  2U                                            /*!< SAU SFSR: INVER Position */
+#define SAU_SFSR_INVER_Msk                 (1UL << SAU_SFSR_INVER_Pos)                    /*!< SAU SFSR: INVER Mask */
+
+#define SAU_SFSR_INVIS_Pos                  1U                                            /*!< SAU SFSR: INVIS Position */
+#define SAU_SFSR_INVIS_Msk                 (1UL << SAU_SFSR_INVIS_Pos)                    /*!< SAU SFSR: INVIS Mask */
+
+#define SAU_SFSR_INVEP_Pos                  0U                                            /*!< SAU SFSR: INVEP Position */
+#define SAU_SFSR_INVEP_Msk                 (1UL /*<< SAU_SFSR_INVEP_Pos*/)                /*!< SAU SFSR: INVEP Mask */
+
+/*@} end of group CMSIS_SAU */
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+  \brief    Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t FPCCR;                  /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register */
+  __IOM uint32_t FPCAR;                  /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register */
+  __IOM uint32_t FPDSCR;                 /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register */
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos                31U                                            /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30U                                            /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_LSPENS_Pos               29U                                            /*!< FPCCR: LSPENS Position */
+#define FPU_FPCCR_LSPENS_Msk               (1UL << FPU_FPCCR_LSPENS_Pos)                  /*!< FPCCR: LSPENS bit Mask */
+
+#define FPU_FPCCR_CLRONRET_Pos             28U                                            /*!< FPCCR: CLRONRET Position */
+#define FPU_FPCCR_CLRONRET_Msk             (1UL << FPU_FPCCR_CLRONRET_Pos)                /*!< FPCCR: CLRONRET bit Mask */
+
+#define FPU_FPCCR_CLRONRETS_Pos            27U                                            /*!< FPCCR: CLRONRETS Position */
+#define FPU_FPCCR_CLRONRETS_Msk            (1UL << FPU_FPCCR_CLRONRETS_Pos)               /*!< FPCCR: CLRONRETS bit Mask */
+
+#define FPU_FPCCR_TS_Pos                   26U                                            /*!< FPCCR: TS Position */
+#define FPU_FPCCR_TS_Msk                   (1UL << FPU_FPCCR_TS_Pos)                      /*!< FPCCR: TS bit Mask */
+
+#define FPU_FPCCR_UFRDY_Pos                10U                                            /*!< FPCCR: UFRDY Position */
+#define FPU_FPCCR_UFRDY_Msk                (1UL << FPU_FPCCR_UFRDY_Pos)                   /*!< FPCCR: UFRDY bit Mask */
+
+#define FPU_FPCCR_SPLIMVIOL_Pos             9U                                            /*!< FPCCR: SPLIMVIOL Position */
+#define FPU_FPCCR_SPLIMVIOL_Msk            (1UL << FPU_FPCCR_SPLIMVIOL_Pos)               /*!< FPCCR: SPLIMVIOL bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8U                                            /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_SFRDY_Pos                 7U                                            /*!< FPCCR: SFRDY Position */
+#define FPU_FPCCR_SFRDY_Msk                (1UL << FPU_FPCCR_SFRDY_Pos)                   /*!< FPCCR: SFRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6U                                            /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5U                                            /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4U                                            /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3U                                            /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_S_Pos                     2U                                            /*!< FPCCR: Security status of the FP context bit Position */
+#define FPU_FPCCR_S_Msk                    (1UL << FPU_FPCCR_S_Pos)                       /*!< FPCCR: Security status of the FP context bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1U                                            /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0U                                            /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos               3U                                            /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos                 26U                                            /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25U                                            /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24U                                            /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22U                                            /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28U                                            /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24U                                            /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20U                                            /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16U                                            /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12U                                            /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8U                                            /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4U                                            /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0U                                            /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28U                                            /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24U                                            /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4U                                            /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0U                                            /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+        uint32_t RESERVED4[1U];
+  __IOM uint32_t DAUTHCTRL;              /*!< Offset: 0x014 (R/W)  Debug Authentication Control Register */
+  __IOM uint32_t DSCSR;                  /*!< Offset: 0x018 (R/W)  Debug Security Control and Status Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESTART_ST_Pos   26U                                            /*!< CoreDebug DHCSR: S_RESTART_ST Position */
+#define CoreDebug_DHCSR_S_RESTART_ST_Msk   (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos)      /*!< CoreDebug DHCSR: S_RESTART_ST Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/* Debug Authentication Control Register Definitions */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos  3U                                            /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */
+#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos)    /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */
+
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos  2U                                            /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos)    /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */
+
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos   1U                                            /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */
+#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk  (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos)     /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */
+
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos   0U                                            /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */
+#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk  (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */
+
+/* Debug Security Control and Status Register Definitions */
+#define CoreDebug_DSCSR_CDS_Pos            16U                                            /*!< CoreDebug DSCSR: CDS Position */
+#define CoreDebug_DSCSR_CDS_Msk            (1UL << CoreDebug_DSCSR_CDS_Pos)               /*!< CoreDebug DSCSR: CDS Mask */
+
+#define CoreDebug_DSCSR_SBRSEL_Pos          1U                                            /*!< CoreDebug DSCSR: SBRSEL Position */
+#define CoreDebug_DSCSR_SBRSEL_Msk         (1UL << CoreDebug_DSCSR_SBRSEL_Pos)            /*!< CoreDebug DSCSR: SBRSEL Mask */
+
+#define CoreDebug_DSCSR_SBRSELEN_Pos        0U                                            /*!< CoreDebug DSCSR: SBRSELEN Position */
+#define CoreDebug_DSCSR_SBRSELEN_Msk       (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/)      /*!< CoreDebug DSCSR: SBRSELEN Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+  #define SCS_BASE            (0xE000E000UL)                             /*!< System Control Space Base Address */
+  #define ITM_BASE            (0xE0000000UL)                             /*!< ITM Base Address */
+  #define DWT_BASE            (0xE0001000UL)                             /*!< DWT Base Address */
+  #define TPI_BASE            (0xE0040000UL)                             /*!< TPI Base Address */
+  #define CoreDebug_BASE      (0xE000EDF0UL)                             /*!< Core Debug Base Address */
+  #define SysTick_BASE        (SCS_BASE +  0x0010UL)                     /*!< SysTick Base Address */
+  #define NVIC_BASE           (SCS_BASE +  0x0100UL)                     /*!< NVIC Base Address */
+  #define SCB_BASE            (SCS_BASE +  0x0D00UL)                     /*!< System Control Block Base Address */
+
+  #define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE         ) /*!< System control Register not in SCB */
+  #define SCB                 ((SCB_Type       *)     SCB_BASE         ) /*!< SCB configuration struct */
+  #define SysTick             ((SysTick_Type   *)     SysTick_BASE     ) /*!< SysTick configuration struct */
+  #define NVIC                ((NVIC_Type      *)     NVIC_BASE        ) /*!< NVIC configuration struct */
+  #define ITM                 ((ITM_Type       *)     ITM_BASE         ) /*!< ITM configuration struct */
+  #define DWT                 ((DWT_Type       *)     DWT_BASE         ) /*!< DWT configuration struct */
+  #define TPI                 ((TPI_Type       *)     TPI_BASE         ) /*!< TPI configuration struct */
+  #define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE   ) /*!< Core Debug configuration struct */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE          (SCS_BASE +  0x0D90UL)                     /*!< Memory Protection Unit */
+    #define MPU               ((MPU_Type       *)     MPU_BASE         ) /*!< Memory Protection Unit */
+  #endif
+
+  #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+    #define SAU_BASE          (SCS_BASE +  0x0DD0UL)                     /*!< Security Attribution Unit */
+    #define SAU               ((SAU_Type       *)     SAU_BASE         ) /*!< Security Attribution Unit */
+  #endif
+
+  #define FPU_BASE            (SCS_BASE +  0x0F30UL)                     /*!< Floating Point Unit */
+  #define FPU                 ((FPU_Type       *)     FPU_BASE         ) /*!< Floating Point Unit */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+  #define SCS_BASE_NS         (0xE002E000UL)                             /*!< System Control Space Base Address (non-secure address space) */
+  #define CoreDebug_BASE_NS   (0xE002EDF0UL)                             /*!< Core Debug Base Address           (non-secure address space) */
+  #define SysTick_BASE_NS     (SCS_BASE_NS +  0x0010UL)                  /*!< SysTick Base Address              (non-secure address space) */
+  #define NVIC_BASE_NS        (SCS_BASE_NS +  0x0100UL)                  /*!< NVIC Base Address                 (non-secure address space) */
+  #define SCB_BASE_NS         (SCS_BASE_NS +  0x0D00UL)                  /*!< System Control Block Base Address (non-secure address space) */
+
+  #define SCnSCB_NS           ((SCnSCB_Type    *)     SCS_BASE_NS      ) /*!< System control Register not in SCB(non-secure address space) */
+  #define SCB_NS              ((SCB_Type       *)     SCB_BASE_NS      ) /*!< SCB configuration struct          (non-secure address space) */
+  #define SysTick_NS          ((SysTick_Type   *)     SysTick_BASE_NS  ) /*!< SysTick configuration struct      (non-secure address space) */
+  #define NVIC_NS             ((NVIC_Type      *)     NVIC_BASE_NS     ) /*!< NVIC configuration struct         (non-secure address space) */
+  #define CoreDebug_NS        ((CoreDebug_Type *)     CoreDebug_BASE_NS) /*!< Core Debug configuration struct   (non-secure address space) */
+
+  #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+    #define MPU_BASE_NS       (SCS_BASE_NS +  0x0D90UL)                  /*!< Memory Protection Unit            (non-secure address space) */
+    #define MPU_NS            ((MPU_Type       *)     MPU_BASE_NS      ) /*!< Memory Protection Unit            (non-secure address space) */
+  #endif
+
+  #define FPU_BASE_NS         (SCS_BASE_NS +  0x0F30UL)                  /*!< Floating Point Unit               (non-secure address space) */
+  #define FPU_NS              ((FPU_Type       *)     FPU_BASE_NS      ) /*!< Floating Point Unit               (non-secure address space) */
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* Special LR values for Secure/Non-Secure call handling and exception handling                                               */
+
+/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS                   */ 
+#define FNC_RETURN                 (0xFEFFFFFFUL)     /* bit [0] ignored when processing a branch                             */
+
+/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */
+#define EXC_RETURN_PREFIX          (0xFF000000UL)     /* bits [31:24] set to indicate an EXC_RETURN value                     */
+#define EXC_RETURN_S               (0x00000040UL)     /* bit [6] stack used to push registers: 0=Non-secure 1=Secure          */
+#define EXC_RETURN_DCRS            (0x00000020UL)     /* bit [5] stacking rules for called registers: 0=skipped 1=saved       */
+#define EXC_RETURN_FTYPE           (0x00000010UL)     /* bit [4] allocate stack for floating-point context: 0=done 1=skipped  */
+#define EXC_RETURN_MODE            (0x00000008UL)     /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode      */
+#define EXC_RETURN_SPSEL           (0x00000002UL)     /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP           */
+#define EXC_RETURN_ES              (0x00000001UL)     /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */
+
+/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking                            */
+#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)  /* Value for processors with floating-point extension:                  */
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125AUL)     /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE                   */
+#else 
+#define EXC_INTEGRITY_SIGNATURE     (0xFEFA125BUL)     /* Value for processors without floating-point extension                */
+#endif
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priority group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Get Interrupt Target State
+  \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+  \return             1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Target State
+  \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |=  ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Clear Interrupt Target State
+  \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  if interrupt is assigned to Secure
+                      1  if interrupt is assigned to Non Secure
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)));
+    return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   Set Priority Grouping (non-secure)
+  \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB_NS->AIRCR;                                                /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos)  );              /* Insert write key and priority group */
+  SCB_NS->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping (non-secure)
+  \details Reads the priority grouping field from the non-secure NVIC when in secure state.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void)
+{
+  return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt (non-secure)
+  \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status (non-secure)
+  \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt (non-secure)
+  \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt (non-secure)
+  \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt (non-secure)
+  \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt (non-secure)
+  \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt (non-secure)
+  \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority (non-secure)
+  \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every non-secure processor exception.
+ */
+__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC_NS->IPR[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority (non-secure)
+  \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+#endif /*  defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv8.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = FPU->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U)
+  {
+    return 2U;           /* Double + Single precision FPU */
+  }
+  else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################   SAU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SAUFunctions SAU Functions
+  \brief    Functions that configure the SAU.
+  @{
+ */
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+
+/**
+  \brief   Enable SAU
+  \details Enables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Enable(void)
+{
+    SAU->CTRL |=  (SAU_CTRL_ENABLE_Msk);
+}
+
+
+
+/**
+  \brief   Disable SAU
+  \details Disables the Security Attribution Unit (SAU).
+ */
+__STATIC_INLINE void TZ_SAU_Disable(void)
+{
+    SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk);
+}
+
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+/*@} end of CMSIS_Core_SAUFunctions */
+
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
+/**
+  \brief   System Tick Configuration (non-secure)
+  \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function TZ_SysTick_Config_NS is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                         /* Reload value impossible */
+  }
+
+  SysTick_NS->LOAD  = (uint32_t)(ticks - 1UL);                            /* set reload register */
+  TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick_NS->VAL   = 0UL;                                                /* Load the SysTick Counter Value */
+  SysTick_NS->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                      SysTick_CTRL_TICKINT_Msk   |
+                      SysTick_CTRL_ENABLE_Msk;                            /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                           /* Function successful */
+}
+#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM33_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm4.h b/test/Drivers/CMSIS/Include/core_cm4.h
new file mode 100644
index 0000000..308b868
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm4.h
@@ -0,0 +1,2129 @@
+/**************************************************************************//**
+ * @file     core_cm4.h
+ * @brief    CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version  V5.0.8
+ * @date     04. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M4
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION       ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM4_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (4U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM4_REV
+    #define __CM4_REV               0x0000U
+    #warning "__CM4_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core FPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16U                                            /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos                    2U                                            /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[8U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[24U];
+  __IOM uint32_t ICER[8U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[24U];
+  __IOM uint32_t ISPR[8U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[24U];
+  __IOM uint32_t ICPR[8U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[24U];
+  __IOM uint32_t IABR[8U];               /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[56U];
+  __IOM uint8_t  IP[240U];               /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED5[644U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHP[12U];               /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t PFR[2U];                /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t DFR;                    /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ADR;                    /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t MMFR[4U];               /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ISAR[5U];               /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+        uint32_t RESERVED0[5U];
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0U                                            /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0U                                            /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos            9U                                         /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk           (1UL << SCnSCB_ACTLR_DISOOFP_Pos)           /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos            8U                                         /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk           (1UL << SCnSCB_ACTLR_DISFPCA_Pos)           /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2U                                         /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos         1U                                         /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk        (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos)        /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0U                                         /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[6U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8U                                            /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+  __IOM uint32_t MASK0;                  /*!< Offset: 0x024 (R/W)  Mask Register 0 */
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+  __IOM uint32_t MASK1;                  /*!< Offset: 0x034 (R/W)  Mask Register 1 */
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+  __IOM uint32_t MASK2;                  /*!< Offset: 0x044 (R/W)  Mask Register 2 */
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+  __IOM uint32_t MASK3;                  /*!< Offset: 0x054 (R/W)  Mask Register 3 */
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0U                                         /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16U                                         /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12U                                         /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9U                                         /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8U                                         /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7U                                         /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5U                                         /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0U                                         /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __IM  uint32_t FIFO1;                  /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16U                                         /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8U                                         /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0U                                         /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16U                                         /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8U                                         /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0U                                         /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6U                                         /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5U                                         /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register */
+  __IOM uint32_t RASR_A1;                /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register */
+  __IOM uint32_t RASR_A2;                /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register */
+  __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   5U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+  \brief    Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t FPCCR;                  /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register */
+  __IOM uint32_t FPCAR;                  /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register */
+  __IOM uint32_t FPDSCR;                 /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register */
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos                31U                                            /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30U                                            /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8U                                            /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6U                                            /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5U                                            /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4U                                            /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3U                                            /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1U                                            /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0U                                            /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos               3U                                            /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos                 26U                                            /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25U                                            /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24U                                            /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22U                                            /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28U                                            /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24U                                            /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20U                                            /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16U                                            /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12U                                            /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8U                                            /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4U                                            /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0U                                            /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28U                                            /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24U                                            /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4U                                            /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0U                                            /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+#define FPU_BASE            (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit */
+#define FPU                 ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit */
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+   #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+#define EXC_RETURN_HANDLER_FPU     (0xFFFFFFE1UL)     /* return to Handler mode, uses MSP after return, restore floating-point state */
+#define EXC_RETURN_THREAD_MSP_FPU  (0xFFFFFFE9UL)     /* return to Thread mode, uses MSP after return, restore floating-point state  */
+#define EXC_RETURN_THREAD_PSP_FPU  (0xFFFFFFEDUL)     /* return to Thread mode, uses PSP after return, restore floating-point state  */
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos)  );              /* Insert write key and priority group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = FPU->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_cm7.h b/test/Drivers/CMSIS/Include/core_cm7.h
new file mode 100644
index 0000000..ada6c2a
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_cm7.h
@@ -0,0 +1,2671 @@
+/**************************************************************************//**
+ * @file     core_cm7.h
+ * @brief    CMSIS Cortex-M7 Core Peripheral Access Layer Header File
+ * @version  V5.0.8
+ * @date     04. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM7_H_GENERIC
+#define __CORE_CM7_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M7
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/* CMSIS CM7 definitions */
+#define __CM7_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                  /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM7_CMSIS_VERSION_SUB   ( __CM_CMSIS_VERSION_SUB)                  /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM7_CMSIS_VERSION       ((__CM7_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM7_CMSIS_VERSION_SUB           )      /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (7U)                                       /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)
+      #define __FPU_USED       1U
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0U
+    #endif
+  #else
+    #define __FPU_USED         0U
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM7_H_DEPENDANT
+#define __CORE_CM7_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM7_REV
+    #define __CM7_REV               0x0000U
+    #warning "__CM7_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0U
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __ICACHE_PRESENT
+    #define __ICACHE_PRESENT          0U
+    #warning "__ICACHE_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DCACHE_PRESENT
+    #define __DCACHE_PRESENT          0U
+    #warning "__DCACHE_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DTCM_PRESENT
+    #define __DTCM_PRESENT            0U
+    #warning "__DTCM_PRESENT        not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M7 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core FPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16U                                            /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16U                                            /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos                    2U                                            /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[8U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[24U];
+  __IOM uint32_t ICER[8U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[24U];
+  __IOM uint32_t ISPR[8U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[24U];
+  __IOM uint32_t ICPR[8U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[24U];
+  __IOM uint32_t IABR[8U];               /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[56U];
+  __IOM uint8_t  IP[240U];               /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED5[644U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHPR[12U];              /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t ID_PFR[2U];             /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t ID_DFR;                 /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ID_AFR;                 /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t ID_MFR[4U];             /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ID_ISAR[5U];            /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t CLIDR;                  /*!< Offset: 0x078 (R/ )  Cache Level ID register */
+  __IM  uint32_t CTR;                    /*!< Offset: 0x07C (R/ )  Cache Type register */
+  __IM  uint32_t CCSIDR;                 /*!< Offset: 0x080 (R/ )  Cache Size ID Register */
+  __IOM uint32_t CSSELR;                 /*!< Offset: 0x084 (R/W)  Cache Size Selection Register */
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+        uint32_t RESERVED3[93U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0x200 ( /W)  Software Triggered Interrupt Register */
+        uint32_t RESERVED4[15U];
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x240 (R/ )  Media and VFP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x244 (R/ )  Media and VFP Feature Register 1 */
+  __IM  uint32_t MVFR2;                  /*!< Offset: 0x248 (R/ )  Media and VFP Feature Register 2 */
+        uint32_t RESERVED5[1U];
+  __OM  uint32_t ICIALLU;                /*!< Offset: 0x250 ( /W)  I-Cache Invalidate All to PoU */
+        uint32_t RESERVED6[1U];
+  __OM  uint32_t ICIMVAU;                /*!< Offset: 0x258 ( /W)  I-Cache Invalidate by MVA to PoU */
+  __OM  uint32_t DCIMVAC;                /*!< Offset: 0x25C ( /W)  D-Cache Invalidate by MVA to PoC */
+  __OM  uint32_t DCISW;                  /*!< Offset: 0x260 ( /W)  D-Cache Invalidate by Set-way */
+  __OM  uint32_t DCCMVAU;                /*!< Offset: 0x264 ( /W)  D-Cache Clean by MVA to PoU */
+  __OM  uint32_t DCCMVAC;                /*!< Offset: 0x268 ( /W)  D-Cache Clean by MVA to PoC */
+  __OM  uint32_t DCCSW;                  /*!< Offset: 0x26C ( /W)  D-Cache Clean by Set-way */
+  __OM  uint32_t DCCIMVAC;               /*!< Offset: 0x270 ( /W)  D-Cache Clean and Invalidate by MVA to PoC */
+  __OM  uint32_t DCCISW;                 /*!< Offset: 0x274 ( /W)  D-Cache Clean and Invalidate by Set-way */
+        uint32_t RESERVED7[6U];
+  __IOM uint32_t ITCMCR;                 /*!< Offset: 0x290 (R/W)  Instruction Tightly-Coupled Memory Control Register */
+  __IOM uint32_t DTCMCR;                 /*!< Offset: 0x294 (R/W)  Data Tightly-Coupled Memory Control Registers */
+  __IOM uint32_t AHBPCR;                 /*!< Offset: 0x298 (R/W)  AHBP Control Register */
+  __IOM uint32_t CACR;                   /*!< Offset: 0x29C (R/W)  L1 Cache Control Register */
+  __IOM uint32_t AHBSCR;                 /*!< Offset: 0x2A0 (R/W)  AHB Slave Control Register */
+        uint32_t RESERVED8[1U];
+  __IOM uint32_t ABFSR;                  /*!< Offset: 0x2A8 (R/W)  Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0U                                            /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                      18U                                           /*!< SCB CCR: Branch prediction enable bit Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: Branch prediction enable bit Mask */
+
+#define SCB_CCR_IC_Pos                      17U                                           /*!< SCB CCR: Instruction cache enable bit Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: Instruction cache enable bit Mask */
+
+#define SCB_CCR_DC_Pos                      16U                                           /*!< SCB CCR: Cache enable bit Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: Cache enable bit Mask */
+
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0U                                            /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MLSPERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 5U)               /*!< SCB CFSR (MMFSR): MLSPERR Position */
+#define SCB_CFSR_MLSPERR_Msk               (1UL << SCB_CFSR_MLSPERR_Pos)                  /*!< SCB CFSR (MMFSR): MLSPERR Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_LSPERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 5U)                  /*!< SCB CFSR (BFSR): LSPERR Position */
+#define SCB_CFSR_LSPERR_Msk               (1UL << SCB_CFSR_LSPERR_Pos)                    /*!< SCB CFSR (BFSR): LSPERR Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos                 27U                                            /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk                 (7UL << SCB_CLIDR_LOUU_Pos)                    /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos                  24U                                            /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk                  (7UL << SCB_CLIDR_LOC_Pos)                     /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos                 29U                                            /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk                 (7UL << SCB_CTR_FORMAT_Pos)                    /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos                    24U                                            /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk                    (0xFUL << SCB_CTR_CWG_Pos)                     /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos                    20U                                            /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk                    (0xFUL << SCB_CTR_ERG_Pos)                     /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos               16U                                            /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk               (0xFUL << SCB_CTR_DMINLINE_Pos)                /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos                0U                                            /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk               (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/)            /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos                  31U                                            /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk                  (1UL << SCB_CCSIDR_WT_Pos)                     /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos                  30U                                            /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk                  (1UL << SCB_CCSIDR_WB_Pos)                     /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos                  29U                                            /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk                  (1UL << SCB_CCSIDR_RA_Pos)                     /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos                  28U                                            /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk                  (1UL << SCB_CCSIDR_WA_Pos)                     /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos             13U                                            /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk             (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos)           /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos        3U                                            /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk       (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos)      /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos             0U                                            /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk            (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/)           /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos                1U                                            /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk               (7UL << SCB_CSSELR_LEVEL_Pos)                  /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos                  0U                                            /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk                 (1UL /*<< SCB_CSSELR_IND_Pos*/)                /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos                  0U                                            /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk                 (0x1FFUL /*<< SCB_STIR_INTID_Pos*/)            /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos                  30U                                            /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk                  (3UL << SCB_DCISW_WAY_Pos)                     /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos                   5U                                            /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk                  (0x1FFUL << SCB_DCISW_SET_Pos)                 /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos                  30U                                            /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk                  (3UL << SCB_DCCSW_WAY_Pos)                     /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos                   5U                                            /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk                  (0x1FFUL << SCB_DCCSW_SET_Pos)                 /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos                 30U                                            /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk                 (3UL << SCB_DCCISW_WAY_Pos)                    /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos                  5U                                            /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk                 (0x1FFUL << SCB_DCCISW_SET_Pos)                /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos                   3U                                            /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk                  (0xFUL << SCB_ITCMCR_SZ_Pos)                   /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos                2U                                            /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk               (1UL << SCB_ITCMCR_RETEN_Pos)                  /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos                  1U                                            /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk                 (1UL << SCB_ITCMCR_RMW_Pos)                    /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos                   0U                                            /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk                  (1UL /*<< SCB_ITCMCR_EN_Pos*/)                 /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos                   3U                                            /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk                  (0xFUL << SCB_DTCMCR_SZ_Pos)                   /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos                2U                                            /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk               (1UL << SCB_DTCMCR_RETEN_Pos)                   /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos                  1U                                            /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk                 (1UL << SCB_DTCMCR_RMW_Pos)                    /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos                   0U                                            /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk                  (1UL /*<< SCB_DTCMCR_EN_Pos*/)                 /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos                   1U                                            /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk                  (7UL << SCB_AHBPCR_SZ_Pos)                     /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos                   0U                                            /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk                  (1UL /*<< SCB_AHBPCR_EN_Pos*/)                 /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos                2U                                            /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk               (1UL << SCB_CACR_FORCEWT_Pos)                  /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos                  1U                                            /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk                 (1UL << SCB_CACR_ECCEN_Pos)                    /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos                   0U                                            /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk                  (1UL /*<< SCB_CACR_SIWT_Pos*/)                 /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos           11U                                            /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk           (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos)           /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos                 2U                                            /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk                (0x1FFUL << SCB_AHBPCR_TPRI_Pos)               /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos                  0U                                            /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk                 (3UL /*<< SCB_AHBPCR_CTL_Pos*/)                /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos              8U                                            /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk             (3UL << SCB_ABFSR_AXIMTYPE_Pos)                /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos                  4U                                            /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk                 (1UL << SCB_ABFSR_EPPB_Pos)                    /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos                  3U                                            /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk                 (1UL << SCB_ABFSR_AXIM_Pos)                    /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos                  2U                                            /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk                 (1UL << SCB_ABFSR_AHBP_Pos)                    /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos                  1U                                            /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk                 (1UL << SCB_ABFSR_DTCM_Pos)                    /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos                  0U                                            /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk                 (1UL /*<< SCB_ABFSR_ITCM_Pos*/)                /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos    12U                                         /*!< ACTLR: DISITMATBFLUSH Position */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk    (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos)    /*!< ACTLR: DISITMATBFLUSH Mask */
+
+#define SCnSCB_ACTLR_DISRAMODE_Pos         11U                                         /*!< ACTLR: DISRAMODE Position */
+#define SCnSCB_ACTLR_DISRAMODE_Msk         (1UL << SCnSCB_ACTLR_DISRAMODE_Pos)         /*!< ACTLR: DISRAMODE Mask */
+
+#define SCnSCB_ACTLR_FPEXCODIS_Pos         10U                                         /*!< ACTLR: FPEXCODIS Position */
+#define SCnSCB_ACTLR_FPEXCODIS_Msk         (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos)         /*!< ACTLR: FPEXCODIS Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2U                                         /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0U                                         /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[6U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/)     /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8U                                            /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+  __IOM uint32_t MASK0;                  /*!< Offset: 0x024 (R/W)  Mask Register 0 */
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+  __IOM uint32_t MASK1;                  /*!< Offset: 0x034 (R/W)  Mask Register 1 */
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+  __IOM uint32_t MASK2;                  /*!< Offset: 0x044 (R/W)  Mask Register 2 */
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+  __IOM uint32_t MASK3;                  /*!< Offset: 0x054 (R/W)  Mask Register 3 */
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+        uint32_t RESERVED3[981U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 (  W)  Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R  )  Lock Status Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0U                                         /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16U                                         /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12U                                         /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9U                                         /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8U                                         /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7U                                         /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5U                                         /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0U                                         /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __IM  uint32_t FIFO1;                  /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16U                                         /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8U                                         /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0U                                         /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16U                                         /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8U                                         /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0U                                         /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6U                                         /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5U                                         /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register */
+  __IOM uint32_t RASR_A1;                /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register */
+  __IOM uint32_t RASR_A2;                /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register */
+  __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+#define MPU_TYPE_RALIASES                  4U
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   5U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+  \brief    Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t FPCCR;                  /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register */
+  __IOM uint32_t FPCAR;                  /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register */
+  __IOM uint32_t FPDSCR;                 /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register */
+  __IM  uint32_t MVFR0;                  /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0 */
+  __IM  uint32_t MVFR1;                  /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1 */
+  __IM  uint32_t MVFR2;                  /*!< Offset: 0x018 (R/ )  Media and FP Feature Register 2 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos                31U                                            /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30U                                            /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8U                                            /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6U                                            /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5U                                            /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4U                                            /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3U                                            /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1U                                            /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0U                                            /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos               3U                                            /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos                 26U                                            /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25U                                            /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24U                                            /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22U                                            /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28U                                            /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24U                                            /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20U                                            /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16U                                            /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12U                                            /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8U                                            /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4U                                            /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0U                                            /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28U                                            /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24U                                            /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4U                                            /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0U                                            /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/* Media and FP Feature Register 2 Definitions */
+
+/*@} end of group CMSIS_FPU */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+#define FPU_BASE            (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit */
+#define FPU                 ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit */
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+#define EXC_RETURN_HANDLER_FPU     (0xFFFFFFE1UL)     /* return to Handler mode, uses MSP after return, restore floating-point state */
+#define EXC_RETURN_THREAD_MSP_FPU  (0xFFFFFFE9UL)     /* return to Thread mode, uses MSP after return, restore floating-point state  */
+#define EXC_RETURN_THREAD_PSP_FPU  (0xFFFFFFEDUL)     /* return to Thread mode, uses PSP after return, restore floating-point state  */
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos)  );              /* Insert write key and priority group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[((uint32_t)IRQn)]                = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]                >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+/* ##########################  MPU functions  #################################### */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+
+#include "mpu_armv7.h"
+
+#endif
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = SCB->MVFR0;
+  if      ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U)
+  {
+    return 2U;           /* Double + Single precision FPU */
+  }
+  else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U)
+  {
+    return 1U;           /* Single precision FPU */
+  }
+  else
+  {
+    return 0U;           /* No FPU */
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################  Cache functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_CacheFunctions Cache Functions
+  \brief    Functions that configure Instruction and Data cache.
+  @{
+ */
+
+/* Cache Size ID Register Macros */
+#define CCSIDR_WAYS(x)         (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
+#define CCSIDR_SETS(x)         (((x) & SCB_CCSIDR_NUMSETS_Msk      ) >> SCB_CCSIDR_NUMSETS_Pos      )
+
+
+/**
+  \brief   Enable I-Cache
+  \details Turns on I-Cache
+  */
+__STATIC_INLINE void SCB_EnableICache (void)
+{
+  #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)
+    __DSB();
+    __ISB();
+    SCB->ICIALLU = 0UL;                     /* invalidate I-Cache */
+    __DSB();
+    __ISB();
+    SCB->CCR |=  (uint32_t)SCB_CCR_IC_Msk;  /* enable I-Cache */
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   Disable I-Cache
+  \details Turns off I-Cache
+  */
+__STATIC_INLINE void SCB_DisableICache (void)
+{
+  #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)
+    __DSB();
+    __ISB();
+    SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk;  /* disable I-Cache */
+    SCB->ICIALLU = 0UL;                     /* invalidate I-Cache */
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   Invalidate I-Cache
+  \details Invalidates I-Cache
+  */
+__STATIC_INLINE void SCB_InvalidateICache (void)
+{
+  #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)
+    __DSB();
+    __ISB();
+    SCB->ICIALLU = 0UL;
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   Enable D-Cache
+  \details Turns on D-Cache
+  */
+__STATIC_INLINE void SCB_EnableDCache (void)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+    uint32_t ccsidr;
+    uint32_t sets;
+    uint32_t ways;
+
+    SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/  /* Level 1 data cache */
+    __DSB();
+
+    ccsidr = SCB->CCSIDR;
+
+                                            /* invalidate D-Cache */
+    sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+    do {
+      ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+      do {
+        SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+                      ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk)  );
+        #if defined ( __CC_ARM )
+          __schedule_barrier();
+        #endif
+      } while (ways-- != 0U);
+    } while(sets-- != 0U);
+    __DSB();
+
+    SCB->CCR |=  (uint32_t)SCB_CCR_DC_Msk;  /* enable D-Cache */
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   Disable D-Cache
+  \details Turns off D-Cache
+  */
+__STATIC_INLINE void SCB_DisableDCache (void)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+    uint32_t ccsidr;
+    uint32_t sets;
+    uint32_t ways;
+
+    SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/  /* Level 1 data cache */
+    __DSB();
+
+    SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk;  /* disable D-Cache */
+    __DSB();
+
+    ccsidr = SCB->CCSIDR;
+
+                                            /* clean & invalidate D-Cache */
+    sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+    do {
+      ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+      do {
+        SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+                       ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk)  );
+        #if defined ( __CC_ARM )
+          __schedule_barrier();
+        #endif
+      } while (ways-- != 0U);
+    } while(sets-- != 0U);
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   Invalidate D-Cache
+  \details Invalidates D-Cache
+  */
+__STATIC_INLINE void SCB_InvalidateDCache (void)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+    uint32_t ccsidr;
+    uint32_t sets;
+    uint32_t ways;
+
+    SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/  /* Level 1 data cache */
+    __DSB();
+
+    ccsidr = SCB->CCSIDR;
+
+                                            /* invalidate D-Cache */
+    sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+    do {
+      ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+      do {
+        SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+                      ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk)  );
+        #if defined ( __CC_ARM )
+          __schedule_barrier();
+        #endif
+      } while (ways-- != 0U);
+    } while(sets-- != 0U);
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   Clean D-Cache
+  \details Cleans D-Cache
+  */
+__STATIC_INLINE void SCB_CleanDCache (void)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+    uint32_t ccsidr;
+    uint32_t sets;
+    uint32_t ways;
+
+     SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/  /* Level 1 data cache */
+   __DSB();
+
+    ccsidr = SCB->CCSIDR;
+
+                                            /* clean D-Cache */
+    sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+    do {
+      ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+      do {
+        SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) |
+                      ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk)  );
+        #if defined ( __CC_ARM )
+          __schedule_barrier();
+        #endif
+      } while (ways-- != 0U);
+    } while(sets-- != 0U);
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   Clean & Invalidate D-Cache
+  \details Cleans and Invalidates D-Cache
+  */
+__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+    uint32_t ccsidr;
+    uint32_t sets;
+    uint32_t ways;
+
+    SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/  /* Level 1 data cache */
+    __DSB();
+
+    ccsidr = SCB->CCSIDR;
+
+                                            /* clean & invalidate D-Cache */
+    sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+    do {
+      ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+      do {
+        SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+                       ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk)  );
+        #if defined ( __CC_ARM )
+          __schedule_barrier();
+        #endif
+      } while (ways-- != 0U);
+    } while(sets-- != 0U);
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   D-Cache Invalidate by address
+  \details Invalidates D-Cache for the given address
+  \param[in]   addr    address (aligned to 32-byte boundary)
+  \param[in]   dsize   size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+     int32_t op_size = dsize;
+    uint32_t op_addr = (uint32_t)addr;
+     int32_t linesize = 32;                /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+    __DSB();
+
+    while (op_size > 0) {
+      SCB->DCIMVAC = op_addr;
+      op_addr += (uint32_t)linesize;
+      op_size -=           linesize;
+    }
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   D-Cache Clean by address
+  \details Cleans D-Cache for the given address
+  \param[in]   addr    address (aligned to 32-byte boundary)
+  \param[in]   dsize   size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+     int32_t op_size = dsize;
+    uint32_t op_addr = (uint32_t) addr;
+     int32_t linesize = 32;                /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+    __DSB();
+
+    while (op_size > 0) {
+      SCB->DCCMVAC = op_addr;
+      op_addr += (uint32_t)linesize;
+      op_size -=           linesize;
+    }
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \brief   D-Cache Clean and Invalidate by address
+  \details Cleans and invalidates D_Cache for the given address
+  \param[in]   addr    address (aligned to 32-byte boundary)
+  \param[in]   dsize   size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+  #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U)
+     int32_t op_size = dsize;
+    uint32_t op_addr = (uint32_t) addr;
+     int32_t linesize = 32;                /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+    __DSB();
+
+    while (op_size > 0) {
+      SCB->DCCIMVAC = op_addr;
+      op_addr += (uint32_t)linesize;
+      op_size -=           linesize;
+    }
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/*@} end of CMSIS_Core_CacheFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_sc000.h b/test/Drivers/CMSIS/Include/core_sc000.h
new file mode 100644
index 0000000..9086c64
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_sc000.h
@@ -0,0 +1,1022 @@
+/**************************************************************************//**
+ * @file     core_sc000.h
+ * @brief    CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version  V5.0.5
+ * @date     28. May 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup SC000
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                 /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION       ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
+                                      __SC000_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_SC                 (000U)                                   /*!< Cortex secure core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __SC000_REV
+    #define __SC000_REV             0x0000U
+    #warning "__SC000_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core MPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+        uint32_t RESERVED1[154U];
+  __IOM uint32_t SFCR;                   /*!< Offset: 0x290 (R/W)  Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0U                                         /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   8U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0xFFFFFFUL << MPU_RBAR_ADDR_Pos)              /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the SC000 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+/*#define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping   not available for SC000 */
+/*#define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping   not available for SC000 */
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for SC000 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/core_sc300.h b/test/Drivers/CMSIS/Include/core_sc300.h
new file mode 100644
index 0000000..665822d
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/core_sc300.h
@@ -0,0 +1,1915 @@
+/**************************************************************************//**
+ * @file     core_sc300.h
+ * @brief    CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version  V5.0.6
+ * @date     04. June 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#include 
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.

+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.

+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.

+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup SC3000
+  @{
+ */
+
+#include "cmsis_version.h"
+
+/*  CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                 /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION       ((__SC300_CMSIS_VERSION_MAIN << 16U) | \
+                                      __SC300_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_SC                 (300U)                                   /*!< Cortex secure core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __SC300_REV
+    #define __SC300_REV               0x0000U
+    #warning "__SC300_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    IO Type Qualifiers are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27U                                            /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:1;               /*!< bit:      9  Reserved */
+    uint32_t ICI_IT_1:6;                 /*!< bit: 10..15  ICI/IT part 1 */
+    uint32_t _reserved1:8;               /*!< bit: 16..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit */
+    uint32_t ICI_IT_2:2;                 /*!< bit: 25..26  ICI/IT part 2 */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27U                                            /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_ICI_IT_2_Pos                  25U                                            /*!< xPSR: ICI/IT part 2 Position */
+#define xPSR_ICI_IT_2_Msk                  (3UL << xPSR_ICI_IT_2_Pos)                     /*!< xPSR: ICI/IT part 2 Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ICI_IT_1_Pos                  10U                                            /*!< xPSR: ICI/IT part 1 Position */
+#define xPSR_ICI_IT_1_Msk                  (0x3FUL << xPSR_ICI_IT_1_Pos)                  /*!< xPSR: ICI/IT part 1 Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[8U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[24U];
+  __IOM uint32_t ICER[8U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[24U];
+  __IOM uint32_t ISPR[8U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[24U];
+  __IOM uint32_t ICPR[8U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[24U];
+  __IOM uint32_t IABR[8U];               /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register */
+        uint32_t RESERVED4[56U];
+  __IOM uint8_t  IP[240U];               /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+        uint32_t RESERVED5[644U];
+  __OM  uint32_t STIR;                   /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0U                                         /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+  __IOM uint8_t  SHP[12U];               /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+  __IOM uint32_t CFSR;                   /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register */
+  __IOM uint32_t HFSR;                   /*!< Offset: 0x02C (R/W)  HardFault Status Register */
+  __IOM uint32_t DFSR;                   /*!< Offset: 0x030 (R/W)  Debug Fault Status Register */
+  __IOM uint32_t MMFAR;                  /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register */
+  __IOM uint32_t BFAR;                   /*!< Offset: 0x038 (R/W)  BusFault Address Register */
+  __IOM uint32_t AFSR;                   /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register */
+  __IM  uint32_t PFR[2U];                /*!< Offset: 0x040 (R/ )  Processor Feature Register */
+  __IM  uint32_t DFR;                    /*!< Offset: 0x048 (R/ )  Debug Feature Register */
+  __IM  uint32_t ADR;                    /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register */
+  __IM  uint32_t MMFR[4U];               /*!< Offset: 0x050 (R/ )  Memory Model Feature Register */
+  __IM  uint32_t ISAR[5U];               /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register */
+        uint32_t RESERVED0[5U];
+  __IOM uint32_t CPACR;                  /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register */
+        uint32_t RESERVED1[129U];
+  __IOM uint32_t SFCR;                   /*!< Offset: 0x290 (R/W)  Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11U                                            /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos               29U                                            /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk               (1UL << SCB_VTOR_TBLBASE_Pos)                  /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos                 7U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8U                                            /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0U                                            /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8U                                            /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4U                                            /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1U                                            /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0U                                            /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18U                                            /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17U                                            /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16U                                            /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14U                                            /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13U                                            /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12U                                            /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11U                                            /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10U                                            /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8U                                            /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7U                                            /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3U                                            /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1U                                            /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0U                                            /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16U                                            /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8U                                            /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0U                                            /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_MMARVALID_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 7U)               /*!< SCB CFSR (MMFSR): MMARVALID Position */
+#define SCB_CFSR_MMARVALID_Msk             (1UL << SCB_CFSR_MMARVALID_Pos)                /*!< SCB CFSR (MMFSR): MMARVALID Mask */
+
+#define SCB_CFSR_MSTKERR_Pos               (SCB_SHCSR_MEMFAULTACT_Pos + 4U)               /*!< SCB CFSR (MMFSR): MSTKERR Position */
+#define SCB_CFSR_MSTKERR_Msk               (1UL << SCB_CFSR_MSTKERR_Pos)                  /*!< SCB CFSR (MMFSR): MSTKERR Mask */
+
+#define SCB_CFSR_MUNSTKERR_Pos             (SCB_SHCSR_MEMFAULTACT_Pos + 3U)               /*!< SCB CFSR (MMFSR): MUNSTKERR Position */
+#define SCB_CFSR_MUNSTKERR_Msk             (1UL << SCB_CFSR_MUNSTKERR_Pos)                /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */
+
+#define SCB_CFSR_DACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 1U)               /*!< SCB CFSR (MMFSR): DACCVIOL Position */
+#define SCB_CFSR_DACCVIOL_Msk              (1UL << SCB_CFSR_DACCVIOL_Pos)                 /*!< SCB CFSR (MMFSR): DACCVIOL Mask */
+
+#define SCB_CFSR_IACCVIOL_Pos              (SCB_SHCSR_MEMFAULTACT_Pos + 0U)               /*!< SCB CFSR (MMFSR): IACCVIOL Position */
+#define SCB_CFSR_IACCVIOL_Msk              (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/)             /*!< SCB CFSR (MMFSR): IACCVIOL Mask */
+
+/* BusFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_BFARVALID_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 7U)                  /*!< SCB CFSR (BFSR): BFARVALID Position */
+#define SCB_CFSR_BFARVALID_Msk            (1UL << SCB_CFSR_BFARVALID_Pos)                 /*!< SCB CFSR (BFSR): BFARVALID Mask */
+
+#define SCB_CFSR_STKERR_Pos               (SCB_CFSR_BUSFAULTSR_Pos + 4U)                  /*!< SCB CFSR (BFSR): STKERR Position */
+#define SCB_CFSR_STKERR_Msk               (1UL << SCB_CFSR_STKERR_Pos)                    /*!< SCB CFSR (BFSR): STKERR Mask */
+
+#define SCB_CFSR_UNSTKERR_Pos             (SCB_CFSR_BUSFAULTSR_Pos + 3U)                  /*!< SCB CFSR (BFSR): UNSTKERR Position */
+#define SCB_CFSR_UNSTKERR_Msk             (1UL << SCB_CFSR_UNSTKERR_Pos)                  /*!< SCB CFSR (BFSR): UNSTKERR Mask */
+
+#define SCB_CFSR_IMPRECISERR_Pos          (SCB_CFSR_BUSFAULTSR_Pos + 2U)                  /*!< SCB CFSR (BFSR): IMPRECISERR Position */
+#define SCB_CFSR_IMPRECISERR_Msk          (1UL << SCB_CFSR_IMPRECISERR_Pos)               /*!< SCB CFSR (BFSR): IMPRECISERR Mask */
+
+#define SCB_CFSR_PRECISERR_Pos            (SCB_CFSR_BUSFAULTSR_Pos + 1U)                  /*!< SCB CFSR (BFSR): PRECISERR Position */
+#define SCB_CFSR_PRECISERR_Msk            (1UL << SCB_CFSR_PRECISERR_Pos)                 /*!< SCB CFSR (BFSR): PRECISERR Mask */
+
+#define SCB_CFSR_IBUSERR_Pos              (SCB_CFSR_BUSFAULTSR_Pos + 0U)                  /*!< SCB CFSR (BFSR): IBUSERR Position */
+#define SCB_CFSR_IBUSERR_Msk              (1UL << SCB_CFSR_IBUSERR_Pos)                   /*!< SCB CFSR (BFSR): IBUSERR Mask */
+
+/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */
+#define SCB_CFSR_DIVBYZERO_Pos            (SCB_CFSR_USGFAULTSR_Pos + 9U)                  /*!< SCB CFSR (UFSR): DIVBYZERO Position */
+#define SCB_CFSR_DIVBYZERO_Msk            (1UL << SCB_CFSR_DIVBYZERO_Pos)                 /*!< SCB CFSR (UFSR): DIVBYZERO Mask */
+
+#define SCB_CFSR_UNALIGNED_Pos            (SCB_CFSR_USGFAULTSR_Pos + 8U)                  /*!< SCB CFSR (UFSR): UNALIGNED Position */
+#define SCB_CFSR_UNALIGNED_Msk            (1UL << SCB_CFSR_UNALIGNED_Pos)                 /*!< SCB CFSR (UFSR): UNALIGNED Mask */
+
+#define SCB_CFSR_NOCP_Pos                 (SCB_CFSR_USGFAULTSR_Pos + 3U)                  /*!< SCB CFSR (UFSR): NOCP Position */
+#define SCB_CFSR_NOCP_Msk                 (1UL << SCB_CFSR_NOCP_Pos)                      /*!< SCB CFSR (UFSR): NOCP Mask */
+
+#define SCB_CFSR_INVPC_Pos                (SCB_CFSR_USGFAULTSR_Pos + 2U)                  /*!< SCB CFSR (UFSR): INVPC Position */
+#define SCB_CFSR_INVPC_Msk                (1UL << SCB_CFSR_INVPC_Pos)                     /*!< SCB CFSR (UFSR): INVPC Mask */
+
+#define SCB_CFSR_INVSTATE_Pos             (SCB_CFSR_USGFAULTSR_Pos + 1U)                  /*!< SCB CFSR (UFSR): INVSTATE Position */
+#define SCB_CFSR_INVSTATE_Msk             (1UL << SCB_CFSR_INVSTATE_Pos)                  /*!< SCB CFSR (UFSR): INVSTATE Mask */
+
+#define SCB_CFSR_UNDEFINSTR_Pos           (SCB_CFSR_USGFAULTSR_Pos + 0U)                  /*!< SCB CFSR (UFSR): UNDEFINSTR Position */
+#define SCB_CFSR_UNDEFINSTR_Msk           (1UL << SCB_CFSR_UNDEFINSTR_Pos)                /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31U                                            /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30U                                            /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1U                                            /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4U                                            /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3U                                            /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2U                                            /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1U                                            /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0U                                            /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[1U];
+  __IM  uint32_t ICTR;                   /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register */
+        uint32_t RESERVED1[1U];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0U                                         /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+  \brief    Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __OM  union
+  {
+    __OM  uint8_t    u8;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit */
+    __OM  uint16_t   u16;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit */
+    __OM  uint32_t   u32;                /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit */
+  }  PORT [32U];                         /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers */
+        uint32_t RESERVED0[864U];
+  __IOM uint32_t TER;                    /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register */
+        uint32_t RESERVED1[15U];
+  __IOM uint32_t TPR;                    /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register */
+        uint32_t RESERVED2[15U];
+  __IOM uint32_t TCR;                    /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register */
+        uint32_t RESERVED3[29U];
+  __OM  uint32_t IWR;                    /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register */
+  __IM  uint32_t IRR;                    /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register */
+  __IOM uint32_t IMCR;                   /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register */
+        uint32_t RESERVED4[43U];
+  __OM  uint32_t LAR;                    /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register */
+  __IM  uint32_t LSR;                    /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register */
+        uint32_t RESERVED5[6U];
+  __IM  uint32_t PID4;                   /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __IM  uint32_t PID5;                   /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __IM  uint32_t PID6;                   /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __IM  uint32_t PID7;                   /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __IM  uint32_t PID0;                   /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __IM  uint32_t PID1;                   /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __IM  uint32_t PID2;                   /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __IM  uint32_t PID3;                   /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __IM  uint32_t CID0;                   /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __IM  uint32_t CID1;                   /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __IM  uint32_t CID2;                   /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __IM  uint32_t CID3;                   /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0U                                            /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23U                                            /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16U                                            /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10U                                            /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8U                                            /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4U                                            /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3U                                            /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2U                                            /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1U                                            /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0U                                            /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0U                                            /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0U                                            /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0U                                            /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2U                                            /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1U                                            /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0U                                            /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+  \brief    Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  Control Register */
+  __IOM uint32_t CYCCNT;                 /*!< Offset: 0x004 (R/W)  Cycle Count Register */
+  __IOM uint32_t CPICNT;                 /*!< Offset: 0x008 (R/W)  CPI Count Register */
+  __IOM uint32_t EXCCNT;                 /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register */
+  __IOM uint32_t SLEEPCNT;               /*!< Offset: 0x010 (R/W)  Sleep Count Register */
+  __IOM uint32_t LSUCNT;                 /*!< Offset: 0x014 (R/W)  LSU Count Register */
+  __IOM uint32_t FOLDCNT;                /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register */
+  __IM  uint32_t PCSR;                   /*!< Offset: 0x01C (R/ )  Program Counter Sample Register */
+  __IOM uint32_t COMP0;                  /*!< Offset: 0x020 (R/W)  Comparator Register 0 */
+  __IOM uint32_t MASK0;                  /*!< Offset: 0x024 (R/W)  Mask Register 0 */
+  __IOM uint32_t FUNCTION0;              /*!< Offset: 0x028 (R/W)  Function Register 0 */
+        uint32_t RESERVED0[1U];
+  __IOM uint32_t COMP1;                  /*!< Offset: 0x030 (R/W)  Comparator Register 1 */
+  __IOM uint32_t MASK1;                  /*!< Offset: 0x034 (R/W)  Mask Register 1 */
+  __IOM uint32_t FUNCTION1;              /*!< Offset: 0x038 (R/W)  Function Register 1 */
+        uint32_t RESERVED1[1U];
+  __IOM uint32_t COMP2;                  /*!< Offset: 0x040 (R/W)  Comparator Register 2 */
+  __IOM uint32_t MASK2;                  /*!< Offset: 0x044 (R/W)  Mask Register 2 */
+  __IOM uint32_t FUNCTION2;              /*!< Offset: 0x048 (R/W)  Function Register 2 */
+        uint32_t RESERVED2[1U];
+  __IOM uint32_t COMP3;                  /*!< Offset: 0x050 (R/W)  Comparator Register 3 */
+  __IOM uint32_t MASK3;                  /*!< Offset: 0x054 (R/W)  Mask Register 3 */
+  __IOM uint32_t FUNCTION3;              /*!< Offset: 0x058 (R/W)  Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28U                                         /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27U                                         /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26U                                         /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25U                                         /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24U                                         /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22U                                         /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21U                                         /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20U                                         /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19U                                         /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18U                                         /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17U                                         /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16U                                         /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12U                                         /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10U                                         /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9U                                         /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5U                                         /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1U                                         /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0U                                         /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0U                                         /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0U                                         /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0U                                         /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0U                                         /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0U                                         /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0U                                         /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24U                                         /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16U                                         /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12U                                         /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10U                                         /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9U                                         /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8U                                         /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7U                                         /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5U                                         /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0U                                         /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+  \brief    Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IM  uint32_t SSPSR;                  /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register */
+  __IOM uint32_t CSPSR;                  /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACPR;                   /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+        uint32_t RESERVED1[55U];
+  __IOM uint32_t SPPR;                   /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+        uint32_t RESERVED2[131U];
+  __IM  uint32_t FFSR;                   /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IOM uint32_t FFCR;                   /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __IM  uint32_t FSCR;                   /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+        uint32_t RESERVED3[759U];
+  __IM  uint32_t TRIGGER;                /*!< Offset: 0xEE8 (R/ )  TRIGGER Register */
+  __IM  uint32_t FIFO0;                  /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __IM  uint32_t ITATBCTR2;              /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+        uint32_t RESERVED4[1U];
+  __IM  uint32_t ITATBCTR0;              /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __IM  uint32_t FIFO1;                  /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IOM uint32_t ITCTRL;                 /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+        uint32_t RESERVED5[39U];
+  __IOM uint32_t CLAIMSET;               /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IOM uint32_t CLAIMCLR;               /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+        uint32_t RESERVED7[8U];
+  __IM  uint32_t DEVID;                  /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __IM  uint32_t DEVTYPE;                /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0U                                         /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0U                                         /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3U                                         /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2U                                         /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1U                                         /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0U                                         /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8U                                         /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1U                                         /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0U                                         /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16U                                         /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8U                                         /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0U                                         /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY2 Position */
+#define TPI_ITATBCTR2_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/)   /*!< TPI ITATBCTR2: ATREADY2 Mask */
+
+#define TPI_ITATBCTR2_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR2: ATREADY1 Position */
+#define TPI_ITATBCTR2_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/)   /*!< TPI ITATBCTR2: ATREADY1 Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29U                                         /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27U                                         /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26U                                         /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24U                                         /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16U                                         /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8U                                         /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0U                                         /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY2_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY2 Position */
+#define TPI_ITATBCTR0_ATREADY2_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/)   /*!< TPI ITATBCTR0: ATREADY2 Mask */
+
+#define TPI_ITATBCTR0_ATREADY1_Pos          0U                                         /*!< TPI ITATBCTR0: ATREADY1 Position */
+#define TPI_ITATBCTR0_ATREADY1_Msk         (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/)   /*!< TPI ITATBCTR0: ATREADY1 Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0U                                         /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11U                                         /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10U                                         /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9U                                         /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6U                                         /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5U                                         /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0U                                         /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             4U                                         /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           0U                                         /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A1;                /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register */
+  __IOM uint32_t RASR_A1;                /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A2;                /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register */
+  __IOM uint32_t RASR_A2;                /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IOM uint32_t RBAR_A3;                /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register */
+  __IOM uint32_t RASR_A3;                /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   5U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Type definitions for the Core Debug Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IOM uint32_t DHCSR;                  /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register */
+  __OM  uint32_t DCRSR;                  /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register */
+  __IOM uint32_t DCRDR;                  /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register */
+  __IOM uint32_t DEMCR;                  /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16U                                            /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25U                                            /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24U                                            /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19U                                            /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18U                                            /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17U                                            /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16U                                            /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5U                                            /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3U                                            /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2U                                            /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1U                                            /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0U                                            /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos         16U                                            /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0U                                            /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos         24U                                            /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19U                                            /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18U                                            /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17U                                            /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16U                                            /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10U                                            /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9U                                            /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8U                                            /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7U                                            /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6U                                            /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5U                                            /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4U                                            /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0U                                            /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+  #define NVIC_GetActive              __NVIC_GetActive
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+
+/**
+  \brief   Set Priority Grouping
+  \details Sets the priority grouping field using the required unlock sequence.
+           The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+           Only values from 0..7 are used.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8U)                      );              /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/**
+  \brief   Get Priority Grouping
+  \details Reads the priority grouping field from the NVIC Interrupt Controller.
+  \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Active Interrupt
+  \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not active.
+  \return             1  Interrupt status is active.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[((uint32_t)IRQn)]               = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else
+  {
+    SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return(((uint32_t)NVIC->IP[((uint32_t)IRQn)]               >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable __Vendor_SysTickConfig is set to 1, then the
+           function SysTick_Config is not included. In this case, the file device.h
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_core_DebugFunctions ITM Functions
+  \brief    Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                              /*!< External variable to receive characters. */
+#define                 ITM_RXBUFFER_EMPTY  ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+  \brief   ITM Send Character
+  \details Transmits a character via the ITM channel 0, and
+           \li Just returns when no debugger is connected that has booked the output.
+           \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+  \param [in]     ch  Character to transmit.
+  \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0U].u32 == 0UL)
+    {
+      __NOP();
+    }
+    ITM->PORT[0U].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Receive Character
+  \details Inputs a character via the external variable \ref ITM_RxBuffer.
+  \return             Received character.
+  \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+  {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/**
+  \brief   ITM Check Character
+  \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+  \return          0  No character available.
+  \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+  {
+    return (0);                              /* no character available */
+  }
+  else
+  {
+    return (1);                              /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/test/Drivers/CMSIS/Include/mpu_armv7.h b/test/Drivers/CMSIS/Include/mpu_armv7.h
new file mode 100644
index 0000000..7d4b600
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/mpu_armv7.h
@@ -0,0 +1,270 @@
+/******************************************************************************
+ * @file     mpu_armv7.h
+ * @brief    CMSIS MPU API for Armv7-M MPU
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+ 
+#ifndef ARM_MPU_ARMV7_H
+#define ARM_MPU_ARMV7_H
+
+#define ARM_MPU_REGION_SIZE_32B      ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
+#define ARM_MPU_REGION_SIZE_64B      ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
+#define ARM_MPU_REGION_SIZE_128B     ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
+#define ARM_MPU_REGION_SIZE_256B     ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
+#define ARM_MPU_REGION_SIZE_512B     ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
+#define ARM_MPU_REGION_SIZE_1KB      ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
+#define ARM_MPU_REGION_SIZE_2KB      ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
+#define ARM_MPU_REGION_SIZE_4KB      ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
+#define ARM_MPU_REGION_SIZE_8KB      ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
+#define ARM_MPU_REGION_SIZE_16KB     ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
+#define ARM_MPU_REGION_SIZE_32KB     ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
+#define ARM_MPU_REGION_SIZE_64KB     ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
+#define ARM_MPU_REGION_SIZE_128KB    ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
+#define ARM_MPU_REGION_SIZE_256KB    ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
+#define ARM_MPU_REGION_SIZE_512KB    ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
+#define ARM_MPU_REGION_SIZE_1MB      ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
+#define ARM_MPU_REGION_SIZE_2MB      ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
+#define ARM_MPU_REGION_SIZE_4MB      ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
+#define ARM_MPU_REGION_SIZE_8MB      ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
+#define ARM_MPU_REGION_SIZE_16MB     ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
+#define ARM_MPU_REGION_SIZE_32MB     ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
+#define ARM_MPU_REGION_SIZE_64MB     ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
+#define ARM_MPU_REGION_SIZE_128MB    ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
+#define ARM_MPU_REGION_SIZE_256MB    ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
+#define ARM_MPU_REGION_SIZE_512MB    ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
+#define ARM_MPU_REGION_SIZE_1GB      ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
+#define ARM_MPU_REGION_SIZE_2GB      ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
+#define ARM_MPU_REGION_SIZE_4GB      ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
+
+#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
+#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
+#define ARM_MPU_AP_URO  2U ///!< MPU Access Permission unprivileged access read-only
+#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
+#define ARM_MPU_AP_PRO  5U ///!< MPU Access Permission privileged access read-only
+#define ARM_MPU_AP_RO   6U ///!< MPU Access Permission read-only access
+
+/** MPU Region Base Address Register Value
+*
+* \param Region The region to be configured, number 0 to 15.
+* \param BaseAddress The base address for the region.
+*/
+#define ARM_MPU_RBAR(Region, BaseAddress) \
+  (((BaseAddress) & MPU_RBAR_ADDR_Msk) |  \
+   ((Region) & MPU_RBAR_REGION_Msk)    |  \
+   (MPU_RBAR_VALID_Msk))
+
+/**
+* MPU Memory Access Attributes
+* 
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+*/  
+#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable)   \
+  ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk)                 | \
+   (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk)                      | \
+   (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk)                      | \
+   (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
+
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param AccessAttributes  Memory access attribution, see \ref ARM_MPU_ACCESS_.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/
+#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size)      \
+  ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk)                                          | \
+   (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk)                                      | \
+   (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
+  
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/                         
+#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
+  ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
+
+/**
+* MPU Memory Access Attribute for strongly ordered memory.
+*  - TEX: 000b
+*  - Shareable
+*  - Non-cacheable
+*  - Non-bufferable
+*/ 
+#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
+
+/**
+* MPU Memory Access Attribute for device memory.
+*  - TEX: 000b (if non-shareable) or 010b (if shareable)
+*  - Shareable or non-shareable
+*  - Non-cacheable
+*  - Bufferable (if shareable) or non-bufferable (if non-shareable)
+*
+* \param IsShareable Configures the device memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
+
+/**
+* MPU Memory Access Attribute for normal memory.
+*  - TEX: 1BBb (reflecting outer cacheability rules)
+*  - Shareable or non-shareable
+*  - Cacheable or non-cacheable (reflecting inner cacheability rules)
+*  - Bufferable or non-bufferable (reflecting inner cacheability rules)
+*
+* \param OuterCp Configures the outer cache policy.
+* \param InnerCp Configures the inner cache policy.
+* \param IsShareable Configures the memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
+
+/**
+* MPU Memory Access Attribute non-cacheable policy.
+*/
+#define ARM_MPU_CACHEP_NOCACHE 0U
+
+/**
+* MPU Memory Access Attribute write-back, write and read allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_WRA 1U
+
+/**
+* MPU Memory Access Attribute write-through, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WT_NWA 2U
+
+/**
+* MPU Memory Access Attribute write-back, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_NWA 3U
+
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR; //!< The region base address register value (RBAR)
+  uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  MPU->RNR = rnr;
+  MPU->RASR = 0U;
+}
+
+/** Configure an MPU region.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
+{
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
+{
+  MPU->RNR = rnr;
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  while (cnt > MPU_TYPE_RALIASES) {
+    orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
+    table += MPU_TYPE_RALIASES;
+    cnt -= MPU_TYPE_RALIASES;
+  }
+  orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
+}
+
+#endif
diff --git a/test/Drivers/CMSIS/Include/mpu_armv8.h b/test/Drivers/CMSIS/Include/mpu_armv8.h
new file mode 100644
index 0000000..99ee9f9
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/mpu_armv8.h
@@ -0,0 +1,333 @@
+/******************************************************************************
+ * @file     mpu_armv8.h
+ * @brief    CMSIS MPU API for Armv8-M MPU
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+
+#ifndef ARM_MPU_ARMV8_H
+#define ARM_MPU_ARMV8_H
+
+/** \brief Attribute for device memory (outer only) */
+#define ARM_MPU_ATTR_DEVICE                           ( 0U )
+
+/** \brief Attribute for non-cacheable, normal memory */
+#define ARM_MPU_ATTR_NON_CACHEABLE                    ( 4U )
+
+/** \brief Attribute for normal memory (outer and inner)
+* \param NT Non-Transient: Set to 1 for non-transient data.
+* \param WB Write-Back: Set to 1 to use write-back update policy.
+* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
+* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
+*/
+#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
+  (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
+
+/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
+
+/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRE  (1U)
+
+/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGRE   (2U)
+
+/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_GRE    (3U)
+
+/** \brief Memory Attribute
+* \param O Outer memory attributes
+* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
+*/
+#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
+
+/** \brief Normal memory non-shareable  */
+#define ARM_MPU_SH_NON   (0U)
+
+/** \brief Normal memory outer shareable  */
+#define ARM_MPU_SH_OUTER (2U)
+
+/** \brief Normal memory inner shareable  */
+#define ARM_MPU_SH_INNER (3U)
+
+/** \brief Memory access permissions
+* \param RO Read-Only: Set to 1 for read-only memory.
+* \param NP Non-Privileged: Set to 1 for non-privileged memory.
+*/
+#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
+
+/** \brief Region Base Address Register value
+* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
+* \param SH Defines the Shareability domain for this memory region.
+* \param RO Read-Only: Set to 1 for a read-only memory region.
+* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
+* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
+*/
+#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
+  ((BASE & MPU_RBAR_BASE_Msk) | \
+  ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
+  ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
+  ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
+
+/** \brief Region Limit Address Register value
+* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
+* \param IDX The attribute index to be associated with this memory region.
+*/
+#define ARM_MPU_RLAR(LIMIT, IDX) \
+  ((LIMIT & MPU_RLAR_LIMIT_Msk) | \
+  ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
+  (MPU_RLAR_EN_Msk))
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR;                   /*!< Region Base Address Register value */
+  uint32_t RLAR;                   /*!< Region Limit Address Register value */
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+#ifdef MPU_NS
+/** Enable the Non-secure MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the Non-secure MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable_NS(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU_NS->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+#endif
+
+/** Set the memory attribute encoding to the given MPU.
+* \param mpu Pointer to the MPU to be configured.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
+{
+  const uint8_t reg = idx / 4U;
+  const uint32_t pos = ((idx % 4U) * 8U);
+  const uint32_t mask = 0xFFU << pos;
+  
+  if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
+    return; // invalid index
+  }
+  
+  mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
+}
+
+/** Set the memory attribute encoding.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU, idx, attr);
+}
+
+#ifdef MPU_NS
+/** Set the memory attribute encoding to the Non-secure MPU.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
+}
+#endif
+
+/** Clear and disable the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
+{
+  mpu->RNR = rnr;
+  mpu->RLAR = 0U;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  ARM_MPU_ClrRegionEx(MPU, rnr);
+}
+
+#ifdef MPU_NS
+/** Clear and disable the given Non-secure MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
+{  
+  ARM_MPU_ClrRegionEx(MPU_NS, rnr);
+}
+#endif
+
+/** Configure the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  mpu->RNR = rnr;
+  mpu->RBAR = rbar;
+  mpu->RLAR = rlar;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
+}
+
+#ifdef MPU_NS
+/** Configure the given Non-secure MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);  
+}
+#endif
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table to the given MPU.
+* \param mpu Pointer to the MPU registers to be used.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  if (cnt == 1U) {
+    mpu->RNR = rnr;
+    orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
+  } else {
+    uint32_t rnrBase   = rnr & ~(MPU_TYPE_RALIASES-1U);
+    uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
+    
+    mpu->RNR = rnrBase;
+    while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
+      uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
+      orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
+      table += c;
+      cnt -= c;
+      rnrOffset = 0U;
+      rnrBase += MPU_TYPE_RALIASES;
+      mpu->RNR = rnrBase;
+    }
+    
+    orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU, rnr, table, cnt);
+}
+
+#ifdef MPU_NS
+/** Load the given number of MPU regions from a table to the Non-secure MPU.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
+}
+#endif
+
+#endif
+
diff --git a/test/Drivers/CMSIS/Include/tz_context.h b/test/Drivers/CMSIS/Include/tz_context.h
new file mode 100644
index 0000000..d4c1474
--- /dev/null
+++ b/test/Drivers/CMSIS/Include/tz_context.h
@@ -0,0 +1,70 @@
+/******************************************************************************
+ * @file     tz_context.h
+ * @brief    Context Management for Armv8-M TrustZone
+ * @version  V1.0.1
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef TZ_CONTEXT_H
+#define TZ_CONTEXT_H
+ 
+#include 
+ 
+#ifndef TZ_MODULEID_T
+#define TZ_MODULEID_T
+/// \details Data type that identifies secure software modules called by a process.
+typedef uint32_t TZ_ModuleId_t;
+#endif
+ 
+/// \details TZ Memory ID identifies an allocated memory slot.
+typedef uint32_t TZ_MemoryId_t;
+  
+/// Initialize secure context memory system
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_InitContextSystem_S (void);
+ 
+/// Allocate context memory for calling secure software modules in TrustZone
+/// \param[in]  module   identifies software modules called from non-secure mode
+/// \return value != 0 id TrustZone memory slot identifier
+/// \return value 0    no memory available or internal error
+TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
+ 
+/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
+ 
+/// Load secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
+ 
+/// Store secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
+ 
+#endif  // TZ_CONTEXT_H
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
new file mode 100644
index 0000000..43cafcb
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
@@ -0,0 +1,3783 @@
+/**
+  ******************************************************************************
+  * @file    stm32_hal_legacy.h
+  * @author  MCD Application Team
+  * @brief   This file contains aliases definition for the STM32Cube HAL constants
+  *          macros and functions maintained for legacy purpose.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32_HAL_LEGACY
+#define STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define AES_FLAG_RDERR                  CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR                  CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF               CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR             CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR             CRYP_CLEARFLAG_WRERR
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define ADC_RESOLUTION12b               ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b               ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b                ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b                ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN            ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED              ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV                 ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV                    ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV             ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP                   ADC_REGULAR_GROUP
+#define INJECTED_GROUP                  ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP          ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT                       ADC_AWD_EVENT
+#define AWD1_EVENT                      ADC_AWD1_EVENT
+#define AWD2_EVENT                      ADC_AWD2_EVENT
+#define AWD3_EVENT                      ADC_AWD3_EVENT
+#define OVR_EVENT                       ADC_OVR_EVENT
+#define JQOVF_EVENT                     ADC_JQOVF_EVENT
+#define ALL_CHANNELS                    ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS                ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS               ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC          ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC            ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1    ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2    ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4    ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6    ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8    ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO       ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2       ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO       ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4        ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO      ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11      ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC                 ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE      ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING    ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING   ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5         ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG          HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ          HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG           HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ           HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR             HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY              HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD               HAL_ADC_STATE_AWD1
+
+#if defined(STM32H7)
+#define ADC_CHANNEL_VBAT_DIV4           ADC_CHANNEL_VBAT
+#endif /* STM32H7 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define COMP_WINDOWMODE_DISABLED       COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED        COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT     COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT     COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT     COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT     COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT     COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT     COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT     COMP_EXTI_LINE_COMP7
+#if defined(STM32L0)
+#define COMP_LPTIMCONNECTION_ENABLED   ((uint32_t)0x00000003U)    /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */
+#endif
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR  COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1            COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR       COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE         COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1      COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2      COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3      COMP_INPUT_PLUS_IO3
+#define COMP_NONINVERTINGINPUT_IO4      COMP_INPUT_PLUS_IO4
+#define COMP_NONINVERTINGINPUT_IO5      COMP_INPUT_PLUS_IO5
+#define COMP_NONINVERTINGINPUT_IO6      COMP_INPUT_PLUS_IO6
+
+#define COMP_INVERTINGINPUT_1_4VREFINT  COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT  COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT  COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT     COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1    COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2    COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1        COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2        COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1         COMP_INPUT_MINUS_IO1
+#if defined(STM32L0)
+/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2),     */
+/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding   */
+/* to the second dedicated IO (only for COMP2).                               */
+#define COMP_INVERTINGINPUT_IO2         COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO3         COMP_INPUT_MINUS_IO2
+#else
+#define COMP_INVERTINGINPUT_IO2         COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3         COMP_INPUT_MINUS_IO3
+#endif
+#define COMP_INVERTINGINPUT_IO4         COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5         COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW            COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH           COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose.                    */
+/*       To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()".        */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK                 COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK                 COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK                 COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5        COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3        COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3        COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4        COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5        COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1       COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE           COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED              COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED               COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED              COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED            COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER               COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER          COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED    CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED     CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define DAC1_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC1_CHANNEL_2                                  DAC_CHANNEL_2
+#define DAC2_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC_WAVE_NONE                                   0x00000000U
+#define DAC_WAVE_NOISE                                  DAC_CR_WAVE1_0
+#define DAC_WAVE_TRIANGLE                               DAC_CR_WAVE1_1
+#define DAC_WAVEGENERATION_NONE                         DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE                        DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE                     DAC_WAVE_TRIANGLE
+
+#if defined(STM32G4) || defined(STM32H7)
+#define DAC_CHIPCONNECT_DISABLE       DAC_CHIPCONNECT_EXTERNAL
+#define DAC_CHIPCONNECT_ENABLE        DAC_CHIPCONNECT_INTERNAL
+#endif
+
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4)
+#define HAL_DAC_MSP_INIT_CB_ID       HAL_DAC_MSPINIT_CB_ID
+#define HAL_DAC_MSP_DEINIT_CB_ID     HAL_DAC_MSPDEINIT_CB_ID
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_REMAPDMA_ADC_DMA_CH2                DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4          DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5          DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4              DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2              DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32            DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6              DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7              DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67              DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67            DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_I2C1_DMA_CH76              DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6               DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7               DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6               DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA                          IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE            __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE           __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+#if defined(STM32L4)
+
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0            HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI1            HAL_DMAMUX1_REQ_GEN_EXTI1
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI2            HAL_DMAMUX1_REQ_GEN_EXTI2
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI3            HAL_DMAMUX1_REQ_GEN_EXTI3
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI4            HAL_DMAMUX1_REQ_GEN_EXTI4
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI5            HAL_DMAMUX1_REQ_GEN_EXTI5
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI6            HAL_DMAMUX1_REQ_GEN_EXTI6
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI7            HAL_DMAMUX1_REQ_GEN_EXTI7
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI8            HAL_DMAMUX1_REQ_GEN_EXTI8
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI9            HAL_DMAMUX1_REQ_GEN_EXTI9
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI10           HAL_DMAMUX1_REQ_GEN_EXTI10
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI11           HAL_DMAMUX1_REQ_GEN_EXTI11
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI12           HAL_DMAMUX1_REQ_GEN_EXTI12
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI13           HAL_DMAMUX1_REQ_GEN_EXTI13
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI14           HAL_DMAMUX1_REQ_GEN_EXTI14
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI15           HAL_DMAMUX1_REQ_GEN_EXTI15
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT  HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT       HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT       HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE           HAL_DMAMUX1_REQ_GEN_DSI_TE
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT          HAL_DMAMUX1_REQ_GEN_DSI_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT        HAL_DMAMUX1_REQ_GEN_DMA2D_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT          HAL_DMAMUX1_REQ_GEN_LTDC_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT          HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING            HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING           HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING    HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define DMA_REQUEST_DCMI_PSSI                    DMA_REQUEST_DCMI
+#endif
+
+#endif /* STM32L4 */
+
+#if defined(STM32G0)
+#define DMA_REQUEST_DAC1_CHANNEL1                DMA_REQUEST_DAC1_CH1
+#define DMA_REQUEST_DAC1_CHANNEL2                DMA_REQUEST_DAC1_CH2
+#define DMA_REQUEST_TIM16_TRIG_COM               DMA_REQUEST_TIM16_COM
+#define DMA_REQUEST_TIM17_TRIG_COM               DMA_REQUEST_TIM17_COM
+
+#define LL_DMAMUX_REQ_TIM16_TRIG_COM             LL_DMAMUX_REQ_TIM16_COM
+#define LL_DMAMUX_REQ_TIM17_TRIG_COM             LL_DMAMUX_REQ_TIM17_COM
+#endif
+
+#if defined(STM32H7)
+
+#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
+#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2
+
+#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX
+#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX
+
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT    HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0              HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO         HAL_DMAMUX1_REQ_GEN_TIM12_TRGO
+
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT    HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP    HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT         HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP        HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP          HAL_DMAMUX2_REQ_GEN_I2C4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP          HAL_DMAMUX2_REQ_GEN_SPI6_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT          HAL_DMAMUX2_REQ_GEN_COMP1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT          HAL_DMAMUX2_REQ_GEN_COMP2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP           HAL_DMAMUX2_REQ_GEN_RTC_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI0              HAL_DMAMUX2_REQ_GEN_EXTI0
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI2              HAL_DMAMUX2_REQ_GEN_EXTI2
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT        HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT            HAL_DMAMUX2_REQ_GEN_SPI6_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT      HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT            HAL_DMAMUX2_REQ_GEN_ADC3_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT      HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT        HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT            HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING              HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING             HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING      HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#define DFSDM_FILTER_EXT_TRIG_LPTIM1               DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM2               DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM3               DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT
+
+#define DAC_TRIGGER_LP1_OUT                        DAC_TRIGGER_LPTIM1_OUT
+#define DAC_TRIGGER_LP2_OUT                        DAC_TRIGGER_LPTIM2_OUT
+
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define TYPEPROGRAM_BYTE              FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD          FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD              FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD        FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS             FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES               FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE           FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE           FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE              OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE               OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE       FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP                    OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG               OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE            OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE             OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE            FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD        FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD            FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE          FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD      FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD          FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE      FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD  FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD      FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE                      FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE          FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD      FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD          FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1               FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2               FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3               FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4               FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST              FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST     FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA           OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB           OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA           OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB           OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE             OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE             OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE              OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE              OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE              HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD                HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG                HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP               HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV              HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR           HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG              HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP                HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA               HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE              HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ               HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS               HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST              HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR            HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO           HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION         HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS               HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW                     OB_IWDG_SW
+#define OB_WDG_HW                     OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET    OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET  OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET       OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET     OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR     IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0                 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1                 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2                 OB_RDP_LEVEL_2
+#if defined(STM32G0)
+#define OB_BOOT_LOCK_DISABLE          OB_BOOT_ENTRY_FORCED_NONE
+#define OB_BOOT_LOCK_ENABLE           OB_BOOT_ENTRY_FORCED_FLASH
+#else
+#define OB_BOOT_ENTRY_FORCED_NONE     OB_BOOT_LOCK_DISABLE
+#define OB_BOOT_ENTRY_FORCED_FLASH    OB_BOOT_LOCK_ENABLE
+#endif
+#if defined(STM32H7)
+#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R  FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R  FLASH_FLAG_STRBERR_BANK2
+#define FLASH_FLAG_WDW            FLASH_FLAG_WBNE
+#define OB_WRP_SECTOR_All         OB_WRP_SECTOR_ALL
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#if defined(STM32H7)
+#define __HAL_RCC_JPEG_CLK_ENABLE               __HAL_RCC_JPGDECEN_CLK_ENABLE
+#define __HAL_RCC_JPEG_CLK_DISABLE              __HAL_RCC_JPGDECEN_CLK_DISABLE
+#define __HAL_RCC_JPEG_FORCE_RESET              __HAL_RCC_JPGDECRST_FORCE_RESET
+#define __HAL_RCC_JPEG_RELEASE_RESET            __HAL_RCC_JPGDECRST_RELEASE_RESET
+#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE         __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE
+#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE        __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9    I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10   I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6    I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7    I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8    I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9    I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1       I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2       I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3       I2C_FASTMODEPLUS_I2C3
+#if defined(STM32G4)
+
+#define HAL_SYSCFG_EnableIOAnalogSwitchBooster    HAL_SYSCFG_EnableIOSwitchBooster
+#define HAL_SYSCFG_DisableIOAnalogSwitchBooster   HAL_SYSCFG_DisableIOSwitchBooster
+#define HAL_SYSCFG_EnableIOAnalogSwitchVDD        HAL_SYSCFG_EnableIOSwitchVDD
+#define HAL_SYSCFG_DisableIOAnalogSwitchVDD       HAL_SYSCFG_DisableIOSwitchVDD
+#endif /* STM32G4 */
+/**
+  * @}
+  */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+  * @{
+  */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE       FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE        FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8            FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16           FMC_NAND_MEM_BUS_WIDTH_16
+#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4)
+#define FMC_NAND_WAIT_FEATURE_DISABLE           FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE            FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8                FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16               FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define FSMC_NORSRAM_TYPEDEF                      FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF             FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+  * @}
+  */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define GET_GPIO_SOURCE                           GPIO_GET_INDEX
+#define GET_GPIO_INDEX                            GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1                          GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32H7)
+#define GPIO_AF7_SDIO1                            GPIO_AF7_SDMMC1
+#define GPIO_AF8_SDIO1                            GPIO_AF8_SDMMC1
+#define GPIO_AF12_SDIO1                           GPIO_AF12_SDMMC1
+#define GPIO_AF9_SDIO2                            GPIO_AF9_SDMMC2
+#define GPIO_AF10_SDIO2                           GPIO_AF10_SDMMC2
+#define GPIO_AF11_SDIO2                           GPIO_AF11_SDMMC2
+
+#if defined (STM32H743xx) || defined (STM32H753xx)  || defined (STM32H750xx) || defined (STM32H742xx) || \
+    defined (STM32H745xx) || defined (STM32H755xx)  || defined (STM32H747xx) || defined (STM32H757xx)
+#define GPIO_AF10_OTG2_HS  GPIO_AF10_OTG2_FS
+#define GPIO_AF10_OTG1_FS  GPIO_AF10_OTG1_HS
+#define GPIO_AF12_OTG2_FS  GPIO_AF12_OTG1_FS
+#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */
+#endif /* STM32H7 */
+
+#define GPIO_AF0_LPTIM                            GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
+#define  GPIO_SPEED_LOW                           GPIO_SPEED_FREQ_LOW
+#define  GPIO_SPEED_MEDIUM                        GPIO_SPEED_FREQ_MEDIUM
+#define  GPIO_SPEED_FAST                          GPIO_SPEED_FREQ_HIGH
+#define  GPIO_SPEED_HIGH                          GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
+
+#if defined(STM32L1)
+ #define  GPIO_SPEED_VERY_LOW    GPIO_SPEED_FREQ_LOW
+ #define  GPIO_SPEED_LOW         GPIO_SPEED_FREQ_MEDIUM
+ #define  GPIO_SPEED_MEDIUM      GPIO_SPEED_FREQ_HIGH
+ #define  GPIO_SPEED_HIGH        GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define  GPIO_SPEED_LOW    GPIO_SPEED_FREQ_LOW
+ #define  GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define  GPIO_SPEED_HIGH   GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM                            GPIO_AF6_DFSDM1
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED           HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter        __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter        __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod         __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod         __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare        __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare        __HAL_HRTIM_GETCOMPARE
+
+#if defined(STM32G4)
+#define HAL_HRTIM_ExternalEventCounterConfig    HAL_HRTIM_ExtEventCounterConfig
+#define HAL_HRTIM_ExternalEventCounterEnable    HAL_HRTIM_ExtEventCounterEnable
+#define HAL_HRTIM_ExternalEventCounterDisable   HAL_HRTIM_ExtEventCounterDisable
+#define HAL_HRTIM_ExternalEventCounterReset     HAL_HRTIM_ExtEventCounterReset
+#define HRTIM_TIMEEVENT_A                       HRTIM_EVENTCOUNTER_A
+#define HRTIM_TIMEEVENT_B                       HRTIM_EVENTCOUNTER_B
+#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL  HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL
+#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL    HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL
+#endif /* STM32G4 */
+
+#if defined(STM32H7)
+#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
+
+#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
+#endif /* STM32H7 */
+
+#if defined(STM32F3)
+/** @brief Constants defining available sources associated to external events.
+  */
+#define HRTIM_EVENTSRC_1              (0x00000000U)
+#define HRTIM_EVENTSRC_2              (HRTIM_EECR1_EE1SRC_0)
+#define HRTIM_EVENTSRC_3              (HRTIM_EECR1_EE1SRC_1)
+#define HRTIM_EVENTSRC_4              (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0)
+
+/** @brief Constants defining the events that can be selected to configure the
+  *        set/reset crossbar of a timer output
+  */
+#define HRTIM_OUTPUTSET_TIMEV_1       (HRTIM_SET1R_TIMEVNT1)
+#define HRTIM_OUTPUTSET_TIMEV_2       (HRTIM_SET1R_TIMEVNT2)
+#define HRTIM_OUTPUTSET_TIMEV_3       (HRTIM_SET1R_TIMEVNT3)
+#define HRTIM_OUTPUTSET_TIMEV_4       (HRTIM_SET1R_TIMEVNT4)
+#define HRTIM_OUTPUTSET_TIMEV_5       (HRTIM_SET1R_TIMEVNT5)
+#define HRTIM_OUTPUTSET_TIMEV_6       (HRTIM_SET1R_TIMEVNT6)
+#define HRTIM_OUTPUTSET_TIMEV_7       (HRTIM_SET1R_TIMEVNT7)
+#define HRTIM_OUTPUTSET_TIMEV_8       (HRTIM_SET1R_TIMEVNT8)
+#define HRTIM_OUTPUTSET_TIMEV_9       (HRTIM_SET1R_TIMEVNT9)
+
+#define HRTIM_OUTPUTRESET_TIMEV_1     (HRTIM_RST1R_TIMEVNT1)
+#define HRTIM_OUTPUTRESET_TIMEV_2     (HRTIM_RST1R_TIMEVNT2)
+#define HRTIM_OUTPUTRESET_TIMEV_3     (HRTIM_RST1R_TIMEVNT3)
+#define HRTIM_OUTPUTRESET_TIMEV_4     (HRTIM_RST1R_TIMEVNT4)
+#define HRTIM_OUTPUTRESET_TIMEV_5     (HRTIM_RST1R_TIMEVNT5)
+#define HRTIM_OUTPUTRESET_TIMEV_6     (HRTIM_RST1R_TIMEVNT6)
+#define HRTIM_OUTPUTRESET_TIMEV_7     (HRTIM_RST1R_TIMEVNT7)
+#define HRTIM_OUTPUTRESET_TIMEV_8     (HRTIM_RST1R_TIMEVNT8)
+#define HRTIM_OUTPUTRESET_TIMEV_9     (HRTIM_RST1R_TIMEVNT9)
+
+/** @brief Constants defining the event filtering applied to external events
+  *        by a timer
+  */
+#define HRTIM_TIMEVENTFILTER_NONE             (0x00000000U)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1     (HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2     (HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3     (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4     (HRTIM_EEFR1_EE1FLTR_2)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3    (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4    (HRTIM_EEFR1_EE1FLTR_3)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2)
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3    (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
+#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM     (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
+
+/** @brief Constants defining the DLL calibration periods (in micro seconds)
+  */
+#define HRTIM_CALIBRATIONRATE_7300             0x00000000U
+#define HRTIM_CALIBRATIONRATE_910              (HRTIM_DLLCR_CALRTE_0)
+#define HRTIM_CALIBRATIONRATE_114              (HRTIM_DLLCR_CALRTE_1)
+#define HRTIM_CALIBRATIONRATE_14               (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0)
+
+#endif /* STM32F3 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLED                I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED                 I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED                I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED                 I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED                  I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED                   I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED                I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED               I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX               HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX               HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX            HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX            HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX             HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX             HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED            IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED             IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define KR_KEY_RELOAD                   IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE                   IWDG_KEY_ENABLE
+#define KR_KEY_EWA                      IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA                      IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE          LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE         LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES           LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION  LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS      LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS      LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS      LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION        LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION        LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION        LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_NAND_Read_Page              HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page             HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea         HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea        HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef             NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS                 ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE                ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE                ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE                ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE                ADDR_4TH_CYCLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define NOR_StatusTypedef              HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS                    HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING                    HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR                      HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT                    HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE                    NOR_WRITE
+#define __NOR_ADDR_SHIFT               NOR_ADDR_SHIFT
+/**
+  * @}
+  */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define OPAMP_NONINVERTINGINPUT_VP0           OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1           OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2           OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3           OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0       OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1       OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2       OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3       OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0              OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1              OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0             OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1             OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0          OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1          OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM             OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO                   OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4)
+#define HAL_OPAMP_MSP_INIT_CB_ID       HAL_OPAMP_MSPINIT_CB_ID
+#define HAL_OPAMP_MSP_DEINIT_CB_ID     HAL_OPAMP_MSPDEINIT_CB_ID
+#endif
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
+
+#if defined(STM32H7)
+  #define I2S_IT_TXE               I2S_IT_TXP
+  #define I2S_IT_RXNE              I2S_IT_RXP
+
+  #define I2S_FLAG_TXE             I2S_FLAG_TXP
+  #define I2S_FLAG_RXNE            I2S_FLAG_RXP
+#endif
+
+#if defined(STM32F7)
+  #define I2S_CLOCK_SYSCLK           I2S_CLOCK_PLL
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA                       ATA_DATA
+#define CF_SECTOR_COUNT               ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER              ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW               ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH              ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD                  ATA_CARD_HEAD
+#define CF_STATUS_CMD                 ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE       ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA           ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD            ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD           ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD           ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD               ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef          HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS                HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING                HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR                  HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT                HAL_PCCARD_STATUS_TIMEOUT
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define FORMAT_BIN                  RTC_FORMAT_BIN
+#define FORMAT_BCD                  RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None     RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_DISABLED  RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED    RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED     RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED     RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED      RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED   RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT         RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT       RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13  RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1   RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13  RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14  RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2   RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0  RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8  RTC_TAMPERPIN_POS1
+
+#if defined(STM32H7)
+#define RTC_TAMPCR_TAMPXE          RTC_TAMPER_X
+#define RTC_TAMPCR_TAMPXIE         RTC_TAMPER_X_INTERRUPT
+
+#define RTC_TAMPER1_INTERRUPT      RTC_IT_TAMP1
+#define RTC_TAMPER2_INTERRUPT      RTC_IT_TAMP2
+#define RTC_TAMPER3_INTERRUPT      RTC_IT_TAMP3
+#define RTC_ALL_TAMPER_INTERRUPT   RTC_IT_TAMPALL
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMARTCARD_NACK_ENABLED                  SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED                 SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED      SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED       SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE       SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE        SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED              SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED               SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED              SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED               SMARTCARD_LASTBIT_ENABLE
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMBUS_DUALADDRESS_DISABLED      SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED       SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED      SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED       SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED        SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED         SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED      SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED     SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED              SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED               SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN    HAL_SMBUS_STATE_LISTEN
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SPI_TIMODE_DISABLED             SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED              SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED     SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED      SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED          SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED           SPI_NSS_PULSE_ENABLE
+
+#if defined(STM32H7)
+
+ #define SPI_FLAG_TXE                    SPI_FLAG_TXP
+ #define SPI_FLAG_RXNE                   SPI_FLAG_RXP
+
+ #define SPI_IT_TXE                      SPI_IT_TXP
+ #define SPI_IT_RXNE                     SPI_IT_RXP
+
+ #define SPI_FRLVL_EMPTY                 SPI_RX_FIFO_0PACKET
+ #define SPI_FRLVL_QUARTER_FULL          SPI_RX_FIFO_1PACKET
+ #define SPI_FRLVL_HALF_FULL             SPI_RX_FIFO_2PACKET
+ #define SPI_FRLVL_FULL                  SPI_RX_FIFO_3PACKET
+
+#endif /* STM32H7 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CCER_CCxE_MASK                   TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK                  TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1                  TIM_DMABASE_CR1
+#define TIM_DMABase_CR2                  TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR                 TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER                 TIM_DMABASE_DIER
+#define TIM_DMABase_SR                   TIM_DMABASE_SR
+#define TIM_DMABase_EGR                  TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1                TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2                TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER                 TIM_DMABASE_CCER
+#define TIM_DMABase_CNT                  TIM_DMABASE_CNT
+#define TIM_DMABase_PSC                  TIM_DMABASE_PSC
+#define TIM_DMABase_ARR                  TIM_DMABASE_ARR
+#define TIM_DMABase_RCR                  TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1                 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2                 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3                 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4                 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR                 TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR                  TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR                 TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1                  TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3                TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5                 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6                 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2                  TIM_DMABASE_OR2
+#define TIM_DMABase_OR3                  TIM_DMABASE_OR3
+#define TIM_DMABase_OR                   TIM_DMABASE_OR
+
+#define TIM_EventSource_Update           TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1              TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2              TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3              TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4              TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM              TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger          TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break            TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2           TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer     TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers    TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers    TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers    TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers    TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers    TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers    TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers    TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers    TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers   TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers   TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers   TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers   TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers   TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers   TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers   TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers   TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers   TIM_DMABURSTLENGTH_18TRANSFERS
+
+#if defined(STM32L0)
+#define TIM22_TI1_GPIO1   TIM22_TI1_GPIO
+#define TIM22_TI1_GPIO2   TIM22_TI1_GPIO
+#endif
+
+#if defined(STM32F3)
+#define IS_TIM_HALL_INTERFACE_INSTANCE   IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE
+#endif
+
+#if defined(STM32H7)
+#define TIM_TIM1_ETR_COMP1_OUT        TIM_TIM1_ETR_COMP1
+#define TIM_TIM1_ETR_COMP2_OUT        TIM_TIM1_ETR_COMP2
+#define TIM_TIM8_ETR_COMP1_OUT        TIM_TIM8_ETR_COMP1
+#define TIM_TIM8_ETR_COMP2_OUT        TIM_TIM8_ETR_COMP2
+#define TIM_TIM2_ETR_COMP1_OUT        TIM_TIM2_ETR_COMP1
+#define TIM_TIM2_ETR_COMP2_OUT        TIM_TIM2_ETR_COMP2
+#define TIM_TIM3_ETR_COMP1_OUT        TIM_TIM3_ETR_COMP1
+#define TIM_TIM1_TI1_COMP1_OUT        TIM_TIM1_TI1_COMP1
+#define TIM_TIM8_TI1_COMP2_OUT        TIM_TIM8_TI1_COMP2
+#define TIM_TIM2_TI4_COMP1_OUT        TIM_TIM2_TI4_COMP1
+#define TIM_TIM2_TI4_COMP2_OUT        TIM_TIM2_TI4_COMP2
+#define TIM_TIM2_TI4_COMP1COMP2_OUT   TIM_TIM2_TI4_COMP1_COMP2
+#define TIM_TIM3_TI1_COMP1_OUT        TIM_TIM3_TI1_COMP1
+#define TIM_TIM3_TI1_COMP2_OUT        TIM_TIM3_TI1_COMP2
+#define TIM_TIM3_TI1_COMP1COMP2_OUT   TIM_TIM3_TI1_COMP1_COMP2
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define TSC_SYNC_POL_FALL        TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH   TSC_SYNC_POLARITY_RISING
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define UART_ONEBIT_SAMPLING_DISABLED   UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED    UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED    UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED     UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE        __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE       __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16                UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16            UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16            UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16           UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8                 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8             UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8             UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8            UART_BRR_SAMPLING8
+
+#define __DIV_LPUART                    UART_DIV_LPUART
+
+#define UART_WAKEUPMETHODE_IDLELINE     UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK  UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define USART_CLOCK_DISABLED            USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED             USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED               USART_NACK_ENABLE
+#define USARTNACK_DISABLED              USART_NACK_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CFR_BASE                    WWDG_CFR_BASE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CAN_FilterFIFO0             CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1             CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0                CAN_IT_TME
+#define CAN_IT_RQCP1                CAN_IT_TME
+#define CAN_IT_RQCP2                CAN_IT_TME
+#define INAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED         ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK             ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING        ((uint8_t)0x02U)
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define VLAN_TAG                ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD         ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD         ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD     ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK        ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK        ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK       ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK       ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR              0x00000100U
+#define ETH_MMCRIR             0x00000104U
+#define ETH_MMCTIR             0x00000108U
+#define ETH_MMCRIMR            0x0000010CU
+#define ETH_MMCTIMR            0x00000110U
+#define ETH_MMCTGFSCCR         0x0000014CU
+#define ETH_MMCTGFMSCCR        0x00000150U
+#define ETH_MMCTGFCR           0x00000168U
+#define ETH_MMCRFCECR          0x00000194U
+#define ETH_MMCRFAECR          0x00000198U
+#define ETH_MMCRGUFCR          0x000001C4U
+
+#define ETH_MAC_TXFIFO_FULL                             0x02000000U  /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY                         0x01000000U  /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE                     0x00400000U  /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE                             0x00000000U  /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ                             0x00100000U  /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING                          0x00200000U  /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING                          0x00300000U  /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE                      0x00080000U  /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE            0x00000000U  /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING         0x00020000U  /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF   0x00040000U  /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING    0x00060000U  /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE           0x00010000U  /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY                  0x00000000U  /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD        0x00000100U  /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD        0x00000200U  /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL                   0x00000300U  /* Rx FIFO fill level: full */
+#if defined(STM32F1)
+#else
+#define ETH_MAC_READCONTROLLER_IDLE           0x00000000U  /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA   0x00000020U  /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U  /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#endif
+#define ETH_MAC_READCONTROLLER_FLUSHING       0x00000060U  /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE           0x00000010U  /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE          0x00000000U  /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE        0x00000002U  /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE       0x00000004U  /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE          0x00000006U  /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE   0x00000001U  /* MAC MII receive protocol engine active */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_DCMI_ERROR_OVF      HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF             DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI         DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI         DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP     HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP     HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP    HAL_DCMI_DisableCrop
+
+/**
+  * @}
+  */
+
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+  || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+  || defined(STM32H7)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define DMA2D_ARGB8888          DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888            DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565            DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555          DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444          DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888             DMA2D_INPUT_ARGB8888
+#define CM_RGB888               DMA2D_INPUT_RGB888
+#define CM_RGB565               DMA2D_INPUT_RGB565
+#define CM_ARGB1555             DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444             DMA2D_INPUT_ARGB4444
+#define CM_L8                   DMA2D_INPUT_L8
+#define CM_AL44                 DMA2D_INPUT_AL44
+#define CM_AL88                 DMA2D_INPUT_AL88
+#define CM_L4                   DMA2D_INPUT_L4
+#define CM_A8                   DMA2D_INPUT_A8
+#define CM_A4                   DMA2D_INPUT_A4
+/**
+  * @}
+  */
+#endif  /* STM32L4 ||  STM32F7 ||  STM32F4 ||  STM32H7 */
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_CRYP_ComputationCpltCallback     HAL_CRYPEx_ComputationCpltCallback
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_HASH_STATETypeDef        HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef         HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish          HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish         HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish       HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish       HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1      HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224    HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256    HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5       HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH         HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC         HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey  HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey   HASH_HMAC_KEYTYPE_LONGKEY
+
+#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
+
+#define HAL_HASH_MD5_Accumulate                HAL_HASH_MD5_Accmlt
+#define HAL_HASH_MD5_Accumulate_End            HAL_HASH_MD5_Accmlt_End
+#define HAL_HASH_MD5_Accumulate_IT             HAL_HASH_MD5_Accmlt_IT
+#define HAL_HASH_MD5_Accumulate_End_IT         HAL_HASH_MD5_Accmlt_End_IT
+
+#define HAL_HASH_SHA1_Accumulate               HAL_HASH_SHA1_Accmlt
+#define HAL_HASH_SHA1_Accumulate_End           HAL_HASH_SHA1_Accmlt_End
+#define HAL_HASH_SHA1_Accumulate_IT            HAL_HASH_SHA1_Accmlt_IT
+#define HAL_HASH_SHA1_Accumulate_End_IT        HAL_HASH_SHA1_Accmlt_End_IT
+
+#define HAL_HASHEx_SHA224_Accumulate           HAL_HASHEx_SHA224_Accmlt
+#define HAL_HASHEx_SHA224_Accumulate_End       HAL_HASHEx_SHA224_Accmlt_End
+#define HAL_HASHEx_SHA224_Accumulate_IT        HAL_HASHEx_SHA224_Accmlt_IT
+#define HAL_HASHEx_SHA224_Accumulate_End_IT    HAL_HASHEx_SHA224_Accmlt_End_IT
+
+#define HAL_HASHEx_SHA256_Accumulate           HAL_HASHEx_SHA256_Accmlt
+#define HAL_HASHEx_SHA256_Accumulate_End       HAL_HASHEx_SHA256_Accmlt_End
+#define HAL_HASHEx_SHA256_Accumulate_IT        HAL_HASHEx_SHA256_Accmlt_IT
+#define HAL_HASHEx_SHA256_Accumulate_End_IT    HAL_HASHEx_SHA256_Accmlt_End_IT
+
+#endif  /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect  HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd)  (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
+#define HAL_EnableSRDomainDBGStopMode      HAL_EnableDomain3DBGStopMode
+#define HAL_DisableSRDomainDBGStopMode     HAL_DisableDomain3DBGStopMode
+#define HAL_EnableSRDomainDBGStandbyMode   HAL_EnableDomain3DBGStandbyMode
+#define HAL_DisableSRDomainDBGStandbyMode  HAL_DisableDomain3DBGStandbyMode
+#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ  || STM32H7B0xxQ */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define FLASH_HalfPageProgram      HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown   HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown  HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock   HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock     HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase    HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program  HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_I2CEx_AnalogFilter_Config         HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config        HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config      HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config     HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
+#define HAL_I2C_Master_Sequential_Transmit_IT  HAL_I2C_Master_Seq_Transmit_IT
+#define HAL_I2C_Master_Sequential_Receive_IT   HAL_I2C_Master_Seq_Receive_IT
+#define HAL_I2C_Slave_Sequential_Transmit_IT   HAL_I2C_Slave_Seq_Transmit_IT
+#define HAL_I2C_Slave_Sequential_Receive_IT    HAL_I2C_Slave_Seq_Receive_IT
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1)
+#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA
+#define HAL_I2C_Master_Sequential_Receive_DMA  HAL_I2C_Master_Seq_Receive_DMA
+#define HAL_I2C_Slave_Sequential_Transmit_DMA  HAL_I2C_Slave_Seq_Transmit_DMA
+#define HAL_I2C_Slave_Sequential_Receive_DMA   HAL_I2C_Slave_Seq_Receive_DMA
+#endif /* STM32H7 || STM32WB  || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */
+
+#if defined(STM32F4)
+#define HAL_FMPI2C_Master_Sequential_Transmit_IT  HAL_FMPI2C_Master_Seq_Transmit_IT
+#define HAL_FMPI2C_Master_Sequential_Receive_IT   HAL_FMPI2C_Master_Seq_Receive_IT
+#define HAL_FMPI2C_Slave_Sequential_Transmit_IT   HAL_FMPI2C_Slave_Seq_Transmit_IT
+#define HAL_FMPI2C_Slave_Sequential_Receive_IT    HAL_FMPI2C_Slave_Seq_Receive_IT
+#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA
+#define HAL_FMPI2C_Master_Sequential_Receive_DMA  HAL_FMPI2C_Master_Seq_Receive_DMA
+#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA  HAL_FMPI2C_Slave_Seq_Transmit_DMA
+#define HAL_FMPI2C_Slave_Sequential_Receive_DMA   HAL_FMPI2C_Slave_Seq_Receive_DMA
+#endif /* STM32F4 */
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+  * @{
+  */
+
+#if defined(STM32G0)
+#define HAL_PWR_ConfigPVD                             HAL_PWREx_ConfigPVD
+#define HAL_PWR_EnablePVD                             HAL_PWREx_EnablePVD
+#define HAL_PWR_DisablePVD                            HAL_PWREx_DisablePVD
+#define HAL_PWR_PVD_IRQHandler                        HAL_PWREx_PVD_IRQHandler
+#endif
+#define HAL_PWR_PVDConfig                             HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg                        HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown                 HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor                  HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg                         HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown                  HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor                   HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler                    HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig                        HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler              HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback                 HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive                   HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive                 HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog                  HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog                   HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig                           HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL                               PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING                            PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING                           PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING                    PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING                         PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING                        PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING                 PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB                                  PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB                                 PWR_CSR_OFFSET_BB
+#define PMODE_BIT_NUMBER                              VOS_BIT_NUMBER
+#define CR_PMODE_BB                                   CR_VOS_BB
+
+#define DBP_BitNumber                                 DBP_BIT_NUMBER
+#define PVDE_BitNumber                                PVDE_BIT_NUMBER
+#define PMODE_BitNumber                               PMODE_BIT_NUMBER
+#define EWUP_BitNumber                                EWUP_BIT_NUMBER
+#define FPDS_BitNumber                                FPDS_BIT_NUMBER
+#define ODEN_BitNumber                                ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber                              ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber                              MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber                              LPLVDS_BIT_NUMBER
+#define BRE_BitNumber                                 BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT                                  PWR_PVD_MODE_NORMAL
+
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SMBUS_Slave_Listen_IT          HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback        HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback  HAL_SMBUS_ListenCpltCallback
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SPI_FlushRxFifo                HAL_SPIEx_FlushRxFifo
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_TIM_DMADelayPulseCplt                       TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError                                TIM_DMAError
+#define HAL_TIM_DMACaptureCplt                          TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt                    TIMEx_DMACommutationCplt
+#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4)
+#define HAL_TIM_SlaveConfigSynchronization              HAL_TIM_SlaveConfigSynchro
+#define HAL_TIM_SlaveConfigSynchronization_IT           HAL_TIM_SlaveConfigSynchro_IT
+#define HAL_TIMEx_CommutationCallback                   HAL_TIMEx_CommutCallback
+#define HAL_TIMEx_ConfigCommutationEvent                HAL_TIMEx_ConfigCommutEvent
+#define HAL_TIMEx_ConfigCommutationEvent_IT             HAL_TIMEx_ConfigCommutEvent_IT
+#define HAL_TIMEx_ConfigCommutationEvent_DMA            HAL_TIMEx_ConfigCommutEvent_DMA
+#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+#define HAL_LTDC_Relaod           HAL_LTDC_Reload
+#define HAL_LTDC_StructInitFromVideoConfig  HAL_LTDCEx_StructInitFromVideoConfig
+#define HAL_LTDC_StructInitFromAdaptedCommandConfig  HAL_LTDCEx_StructInitFromAdaptedCommandConfig
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define AES_IT_CC                      CRYP_IT_CC
+#define AES_IT_ERR                     CRYP_IT_ERR
+#define AES_FLAG_CCF                   CRYP_FLAG_CCF
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_GET_BOOT_MODE                   __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH               __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH         __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM                __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC                 __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM           __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC                __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI             __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK                        __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG                        __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG                      __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE              __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE             __HAL_SYSCFG_VREFINT_OUT_DISABLE
+#define __HAL_SYSCFG_SRAM2_WRP_ENABLE         __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE
+
+#define SYSCFG_FLAG_VREF_READY                SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48                      RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG         IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber                    UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber                      CMP_PD_BIT_NUMBER
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __ADC_ENABLE                                     __HAL_ADC_ENABLE
+#define __ADC_DISABLE                                    __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS                    ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS                   ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED                             ADC_IS_ENABLE
+#define __ADC_IS_ENABLED                                 ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR              ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED             ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR          ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED         ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING                  ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE                        ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION                         ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK                                ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH                            ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR                           ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION            ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE              ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS             ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS                ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM                 ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT                          ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS                        ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN                           ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ                        ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL                            ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL                           ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL                            ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL                         ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET                       ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET                       ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD                      ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION                ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION         ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION        ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER                        ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI                       ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED                   ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED                       ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER        ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER                       ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE                            ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L                                 ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL                                ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL                             ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM                  ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN                               ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE                   ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE                  ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER                    ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1                                   ADC_SQR1
+#define __HAL_ADC_SMPR1                                  ADC_SMPR1
+#define __HAL_ADC_SMPR2                                  ADC_SMPR2
+#define __HAL_ADC_SQR3_RK                                ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK                                ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK                                ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS                         ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS                      ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV                           ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection                       ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq                         ADC_CR2_DMAContReq
+#define __HAL_ADC_JSQR                                   ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL                         ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS               ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF                          ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT                         ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS                       ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN                          ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR                          ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ                       ADC_CFGR1_DMACONTREQ
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_DHR12R1_ALIGNEMENT                        DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT                        DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT                        DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE                            IS_DAC_WAVE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#if defined(STM32H7)
+  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#else
+  #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+  #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+  #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+  #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#endif /* STM32H7 */
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32F3)
+#define COMP_START                                       __HAL_COMP_ENABLE
+#define COMP_STOP                                        __HAL_COMP_DISABLE
+#define COMP_LOCK                                        __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE  COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro             */
+/*       is COMP_FLAG_LOCK.                                                   */
+/*       This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle  */
+/*       argument.                                                            */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__)  (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+  * @}
+  */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_COMP_Start_IT       HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT        HAL_COMP_Stop  /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+  * @}
+  */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+                          ((WAVE) == DAC_WAVE_NOISE)|| \
+                          ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_WRPAREA          IS_OB_WRPAREA
+#define IS_TYPEPROGRAM      IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE        IS_FLASH_TYPEERASE
+#define IS_NBSECTORS        IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE    IS_OB_IWDG_SOURCE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_I2C_RESET_CR2             I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START        I2C_GENERATE_START
+#if defined(STM32F1)
+#define __HAL_I2C_FREQ_RANGE            I2C_FREQRANGE
+#else
+#define __HAL_I2C_FREQ_RANGE            I2C_FREQ_RANGE
+#endif /* STM32F1 */
+#define __HAL_I2C_RISE_TIME             I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD        I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST            I2C_SPEED_FAST
+#define __HAL_I2C_SPEED                 I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE        I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ         I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS         I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE    I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ     I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB           I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB           I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE             I2C_FREQRANGE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_I2S_INSTANCE                 IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT             IS_I2S_ALL_INSTANCE_EXT
+
+#if defined(STM32H7)
+  #define __HAL_I2S_CLEAR_FREFLAG       __HAL_I2S_CLEAR_TIFREFLAG
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __IRDA_DISABLE                  __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE                   __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE       IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION     IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE           IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION         IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE           IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS  IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT    __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT   __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS        __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __OPAMP_CSR_OPAXPD                OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX                OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX                OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX                OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX                OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L             OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H             OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM               OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES          OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX              OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT            OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION  OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET           OPAMP_OFFSET_TRIM_SET
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_PVD_EVENT_DISABLE                                  __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE                                   __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE                                  __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE                                   __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE                         HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE                          HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE                    HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE                     HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER()                  do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE                         __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE                          __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE                __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE                 __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE                 __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE                  __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER              __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER               __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE()                                  do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE()                                   do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE                  HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE                   HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE                                 HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE                                  HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER                 __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER           __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE                                 HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE                                  HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD)         __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD)          __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD)     __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG                                __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT                                __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT                                 __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT                             __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG                                  __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+  * @{
+  */
+
+#define RCC_StopWakeUpClock_MSI     RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI     RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE          __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE           __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE    __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE     __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET          __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET        __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE         __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE          __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET         __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET       __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE    __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE   __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE         __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE          __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE      __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE  __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE  __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE  __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET       __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET  __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE         __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE          __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET         __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET       __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE        __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE         __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET        __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET      __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE   __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE  __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE     __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE     __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET    __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET  __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE       __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE        __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET       __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET     __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE  __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+
+#if defined(STM32WB)
+#define __HAL_RCC_QSPI_CLK_DISABLE            __HAL_RCC_QUADSPI_CLK_DISABLE
+#define __HAL_RCC_QSPI_CLK_ENABLE             __HAL_RCC_QUADSPI_CLK_ENABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE      __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE       __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_QSPI_FORCE_RESET            __HAL_RCC_QUADSPI_FORCE_RESET
+#define __HAL_RCC_QSPI_RELEASE_RESET          __HAL_RCC_QUADSPI_RELEASE_RESET
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED         __HAL_RCC_QUADSPI_IS_CLK_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED        __HAL_RCC_QUADSPI_IS_CLK_DISABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED   __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED  __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED
+#define QSPI_IRQHandler QUADSPI_IRQHandler
+#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */
+
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE        __HAL_RCC_UART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE         __HAL_RCC_UART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE   __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE  __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET        __HAL_RCC_UART4_FORCE_RESET
+#define __USART4_RELEASE_RESET      __HAL_RCC_UART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE        __HAL_RCC_UART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE         __HAL_RCC_UART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE   __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE  __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET        __HAL_RCC_UART5_FORCE_RESET
+#define __USART5_RELEASE_RESET      __HAL_RCC_UART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE        __HAL_RCC_UART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE         __HAL_RCC_UART7_CLK_ENABLE
+#define __USART7_FORCE_RESET        __HAL_RCC_UART7_FORCE_RESET
+#define __USART7_RELEASE_RESET      __HAL_RCC_UART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE        __HAL_RCC_UART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE         __HAL_RCC_UART8_CLK_ENABLE
+#define __USART8_FORCE_RESET        __HAL_RCC_UART8_FORCE_RESET
+#define __USART8_RELEASE_RESET      __HAL_RCC_UART8_RELEASE_RESET
+#define __USB_CLK_DISABLE         __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE          __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET         __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE    __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE   __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+
+#if defined(STM32H7)
+#define __HAL_RCC_WWDG_CLK_DISABLE   __HAL_RCC_WWDG1_CLK_DISABLE
+#define __HAL_RCC_WWDG_CLK_ENABLE   __HAL_RCC_WWDG1_CLK_ENABLE
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE  __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE  __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE
+
+#define __HAL_RCC_WWDG_FORCE_RESET    ((void)0U)  /* Not available on the STM32H7*/
+#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/
+
+
+#define  __HAL_RCC_WWDG_IS_CLK_ENABLED    __HAL_RCC_WWDG1_IS_CLK_ENABLED
+#define  __HAL_RCC_WWDG_IS_CLK_DISABLED  __HAL_RCC_WWDG1_IS_CLK_DISABLED
+#endif
+
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+
+#define __TIM21_CLK_ENABLE   __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE   __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET   __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET  __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE   __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE   __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE   __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE   __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET   __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET  __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE   __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE   __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET  __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE          __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE          __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE  __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE  __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE  __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE  __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE  __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE          __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE          __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE          __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET          __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET          __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE          __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE  __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE            __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE          __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE              __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET          __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET          __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE          __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE  __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE          __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE          __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET          __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET         __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE          __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE  __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE          __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE          __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET          __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET          __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE          __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE  __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE  __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE  __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE  __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE  __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE  __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE          __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE          __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE  __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE  __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE          __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE          __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET        __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET        __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE  __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE  __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE          __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE          __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET          __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET        __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE   __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE  __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE          __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE          __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET          __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET          __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE          __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE          __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET         __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET          __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE          __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE          __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET          __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE          __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE          __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE          __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE          __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET          __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET          __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE   __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE  __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE          __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE          __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET       __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET       __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE  __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE  __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE          __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE          __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET          __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET          __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE  __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE  __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE      __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE     __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED  __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __SRAM3_CLK_SLEEP_ENABLE       __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE        __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE       __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE         __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE        __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE        __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE       __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE        __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE       __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET             __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET           __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE        __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE       __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET             __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET           __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE       __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE        __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE             __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE            __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET            __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET          __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE       __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE      __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET    __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE          __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE         __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE          __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE         __HAL_RCC_ADC34_CLK_DISABLE
+#define __DAC2_CLK_ENABLE           __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE          __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE          __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE         __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE          __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE         __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE          __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE         __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE         __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE        __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE         __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE         __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE         __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE        __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE        __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE        __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET         __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET       __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET         __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET       __HAL_RCC_ADC34_RELEASE_RESET
+#define __DAC2_FORCE_RESET          __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET        __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET         __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET       __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET         __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET       __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET         __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET       __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET        __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET      __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET        __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET        __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET        __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET      __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET      __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET      __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED       __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED      __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED      __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED     __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED      __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED     __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED        __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED       __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED        __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED       __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED       __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED      __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED       __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED      __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED       __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED      __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED       __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED      __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED      __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED     __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED        __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED       __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED      __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED     __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED      __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED     __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED      __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED     __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED      __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED     __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED      __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED     __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED      __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED     __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED      __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED     __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED      __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED     __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED     __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED    __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED       __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED      __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED       __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED      __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED       __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED      __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED        __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED       __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED     __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED    __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED       __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED      __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED       __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED      __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED       __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED      __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED       __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED      __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED     __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED    __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED     __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED    __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED     __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED    __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED       __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED      __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED       __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED      __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED       __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED      __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED       __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED      __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED       __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED      __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED       __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED      __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED       __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED      __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED       __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED      __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED       __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED      __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED      __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED     __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED      __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED     __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED      __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED     __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED      __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED     __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED      __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED     __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED      __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED     __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED      __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED     __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED      __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED     __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED      __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED     __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED        __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED       __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED      __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED     __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED      __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED     __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED     __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED    __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED     __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED    __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED     __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED    __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED        __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED       __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED       __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED      __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32L1)
+#define __HAL_RCC_CRYP_CLK_DISABLE         __HAL_RCC_AES_CLK_DISABLE
+#define __HAL_RCC_CRYP_CLK_ENABLE          __HAL_RCC_AES_CLK_ENABLE
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE   __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE    __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __HAL_RCC_CRYP_FORCE_RESET         __HAL_RCC_AES_FORCE_RESET
+#define __HAL_RCC_CRYP_RELEASE_RESET       __HAL_RCC_AES_RELEASE_RESET
+#endif /* STM32L1 */
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET       __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET     __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE  __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE        __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE       __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED    __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED   __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection               SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1               RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48          RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK         RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG            __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE        __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET         __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET       __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE    __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE   __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE          __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE         __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED      __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED     __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection                 Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO                 RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG              __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE          __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48             RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK           RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#if defined(STM32H7)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE()              __HAL_RCC_USB1_OTG_HS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE()         __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE()             __HAL_RCC_USB1_OTG_HS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE()        __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET()             __HAL_RCC_USB1_OTG_HS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET()           __HAL_RCC_USB1_OTG_HS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE()        __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE()   __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE()       __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE()  __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE()
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE()             __HAL_RCC_USB2_OTG_FS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE()        __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE()            __HAL_RCC_USB2_OTG_FS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE()       __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET()            __HAL_RCC_USB2_OTG_FS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET()          __HAL_RCC_USB2_OTG_FS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE()       __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE()  __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE()      __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE()
+#endif
+
+#define __HAL_RCC_I2SCLK            __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG     __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC                RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE             IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE        IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV           IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV             IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK            IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14                RCC_IT_HSI14RDY
+
+#define RCC_IT_CSSLSE               RCC_IT_LSECSS
+#define RCC_IT_CSSHSE               RCC_IT_CSS
+
+#define RCC_PLLMUL_3                RCC_PLL_MUL3
+#define RCC_PLLMUL_4                RCC_PLL_MUL4
+#define RCC_PLLMUL_6                RCC_PLL_MUL6
+#define RCC_PLLMUL_8                RCC_PLL_MUL8
+#define RCC_PLLMUL_12               RCC_PLL_MUL12
+#define RCC_PLLMUL_16               RCC_PLL_MUL16
+#define RCC_PLLMUL_24               RCC_PLL_MUL24
+#define RCC_PLLMUL_32               RCC_PLL_MUL32
+#define RCC_PLLMUL_48               RCC_PLL_MUL48
+
+#define RCC_PLLDIV_2                RCC_PLL_DIV2
+#define RCC_PLLDIV_3                RCC_PLL_DIV3
+#define RCC_PLLDIV_4                RCC_PLL_DIV4
+
+#define IS_RCC_MCOSOURCE            IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG        __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV               RCC_MCODIV_1
+#define RCC_MCO_DIV1                RCC_MCODIV_1
+#define RCC_MCO_DIV2                RCC_MCODIV_2
+#define RCC_MCO_DIV4                RCC_MCODIV_4
+#define RCC_MCO_DIV8                RCC_MCODIV_8
+#define RCC_MCO_DIV16               RCC_MCODIV_16
+#define RCC_MCO_DIV32               RCC_MCODIV_32
+#define RCC_MCO_DIV64               RCC_MCODIV_64
+#define RCC_MCO_DIV128              RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE          RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI           RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE           RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK        RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI           RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14         RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48         RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE           RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1   RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV  RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2   RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5)
+#define RCC_RTCCLKSOURCE_NO_CLK     RCC_RTCCLKSOURCE_NONE
+#else
+#define RCC_RTCCLKSOURCE_NONE       RCC_RTCCLKSOURCE_NO_CLK
+#endif
+
+#define RCC_USBCLK_PLLSAI1          RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL              RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI              RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK     RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1          RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5        RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2          RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3          RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber        RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER        RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber        RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER        RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER        RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber        RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER        RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber        RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER        RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber     RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber       RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber        RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER        RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber        RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER        RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER       RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber        RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER        RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber        RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER        RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER       RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber     RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber       RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber         RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER         RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS       RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS      RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS      RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS     RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE      RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE      RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB            RCC_CR_HSION_BB
+#define CR_CSSON_BB            RCC_CR_CSSON_BB
+#define CR_PLLON_BB            RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB         RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB            RCC_CR_MSION_BB
+#define CSR_LSION_BB           RCC_CSR_LSION_BB
+#define CSR_LSEON_BB           RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB          RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB           RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB          RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB         RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB          RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB          RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB            RCC_CR_HSEON_BB
+#define CSR_RMVF_BB            RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB         RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB      RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER     __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER    __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB        __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB       __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE         __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE                     __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM       RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV         RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48               RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ           RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP        RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ        RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE             IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48           RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE             __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE            __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED         __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED        __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET            __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET          __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE       __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE      __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED   __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED  __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection         Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM         RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK     RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDMCLKSOURCE_SYSCLK   RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG      __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE  __HAL_RCC_GET_DFSDM1_SOURCE
+#define RCC_DFSDM1CLKSOURCE_PCLK    RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_SWPMI1CLKSOURCE_PCLK    RCC_SWPMI1CLKSOURCE_PCLK1
+#define RCC_LPTIM1CLKSOURCE_PCLK    RCC_LPTIM1CLKSOURCE_PCLK1
+#define RCC_LPTIM2CLKSOURCE_PCLK    RCC_LPTIM2CLKSOURCE_PCLK1
+
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1    RCC_DFSDM1AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2    RCC_DFSDM1AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1    RCC_DFSDM2AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2    RCC_DFSDM2AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM1CLKSOURCE_APB2            RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDM2CLKSOURCE_APB2            RCC_DFSDM2CLKSOURCE_PCLK2
+#define RCC_FMPI2C1CLKSOURCE_APB            RCC_FMPI2C1CLKSOURCE_PCLK1
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define  HAL_RNG_ReadyCallback(__HANDLE__)  HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4)
+#else
+#define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
+#endif
+#define __HAL_RTC_DISABLE_IT                      __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT                       __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT)    __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+                                                   (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__)   (((__EXTI_LINE__)  == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__)    (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__)   (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+                                                      (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() :  \
+                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif   /* STM32F1 */
+
+#define IS_ALARM                                  IS_RTC_ALARM
+#define IS_ALARM_MASK                             IS_RTC_ALARM_MASK
+#define IS_TAMPER                                 IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE                      IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER                          IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT                       IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE                  IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION              IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE                    IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ                   IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION     IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER                         IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK                           IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER                         IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE  __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE  __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define SD_OCR_CID_CSD_OVERWRIETE   SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS         SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4) || defined(STM32F2)
+#define  SD_SDMMC_DISABLED          SD_SDIO_DISABLED
+#define  SD_SDMMC_FUNCTION_BUSY     SD_SDIO_FUNCTION_BUSY
+#define  SD_SDMMC_FUNCTION_FAILED   SD_SDIO_FUNCTION_FAILED
+#define  SD_SDMMC_UNKNOWN_FUNCTION  SD_SDIO_UNKNOWN_FUNCTION
+#define  SD_CMD_SDMMC_SEN_OP_COND   SD_CMD_SDIO_SEN_OP_COND
+#define  SD_CMD_SDMMC_RW_DIRECT     SD_CMD_SDIO_RW_DIRECT
+#define  SD_CMD_SDMMC_RW_EXTENDED   SD_CMD_SDIO_RW_EXTENDED
+#define  __HAL_SD_SDMMC_ENABLE      __HAL_SD_SDIO_ENABLE
+#define  __HAL_SD_SDMMC_DISABLE     __HAL_SD_SDIO_DISABLE
+#define  __HAL_SD_SDMMC_DMA_ENABLE  __HAL_SD_SDIO_DMA_ENABLE
+#define  __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define  __HAL_SD_SDMMC_ENABLE_IT   __HAL_SD_SDIO_ENABLE_IT
+#define  __HAL_SD_SDMMC_DISABLE_IT  __HAL_SD_SDIO_DISABLE_IT
+#define  __HAL_SD_SDMMC_GET_FLAG    __HAL_SD_SDIO_GET_FLAG
+#define  __HAL_SD_SDMMC_CLEAR_FLAG  __HAL_SD_SDIO_CLEAR_FLAG
+#define  __HAL_SD_SDMMC_GET_IT      __HAL_SD_SDIO_GET_IT
+#define  __HAL_SD_SDMMC_CLEAR_IT    __HAL_SD_SDIO_CLEAR_IT
+#define  SDMMC_STATIC_FLAGS         SDIO_STATIC_FLAGS
+#define  SDMMC_CMD0TIMEOUT          SDIO_CMD0TIMEOUT
+#define  SD_SDMMC_SEND_IF_COND      SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define  SDMMC1_IRQn                SDIO_IRQn
+#define  SDMMC1_IRQHandler          SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define  SD_SDIO_DISABLED           SD_SDMMC_DISABLED
+#define  SD_SDIO_FUNCTION_BUSY      SD_SDMMC_FUNCTION_BUSY
+#define  SD_SDIO_FUNCTION_FAILED    SD_SDMMC_FUNCTION_FAILED
+#define  SD_SDIO_UNKNOWN_FUNCTION   SD_SDMMC_UNKNOWN_FUNCTION
+#define  SD_CMD_SDIO_SEN_OP_COND    SD_CMD_SDMMC_SEN_OP_COND
+#define  SD_CMD_SDIO_RW_DIRECT      SD_CMD_SDMMC_RW_DIRECT
+#define  SD_CMD_SDIO_RW_EXTENDED    SD_CMD_SDMMC_RW_EXTENDED
+#define  __HAL_SD_SDIO_ENABLE       __HAL_SD_SDMMC_ENABLE
+#define  __HAL_SD_SDIO_DISABLE      __HAL_SD_SDMMC_DISABLE
+#define  __HAL_SD_SDIO_DMA_ENABLE   __HAL_SD_SDMMC_DMA_ENABLE
+#define  __HAL_SD_SDIO_DMA_DISABL   __HAL_SD_SDMMC_DMA_DISABLE
+#define  __HAL_SD_SDIO_ENABLE_IT    __HAL_SD_SDMMC_ENABLE_IT
+#define  __HAL_SD_SDIO_DISABLE_IT   __HAL_SD_SDMMC_DISABLE_IT
+#define  __HAL_SD_SDIO_GET_FLAG     __HAL_SD_SDMMC_GET_FLAG
+#define  __HAL_SD_SDIO_CLEAR_FLAG   __HAL_SD_SDMMC_CLEAR_FLAG
+#define  __HAL_SD_SDIO_GET_IT       __HAL_SD_SDMMC_GET_IT
+#define  __HAL_SD_SDIO_CLEAR_IT     __HAL_SD_SDMMC_CLEAR_IT
+#define  SDIO_STATIC_FLAGS          SDMMC_STATIC_FLAGS
+#define  SDIO_CMD0TIMEOUT           SDMMC_CMD0TIMEOUT
+#define  SD_SDIO_SEND_IF_COND       SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define  SDIO_IRQn                  SDMMC1_IRQn
+#define  SDIO_IRQHandler            SDMMC1_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7)
+#define  HAL_SD_CardCIDTypedef       HAL_SD_CardCIDTypeDef
+#define  HAL_SD_CardCSDTypedef       HAL_SD_CardCSDTypeDef
+#define  HAL_SD_CardStatusTypedef    HAL_SD_CardStatusTypeDef
+#define  HAL_SD_CardStateTypedef     HAL_SD_CardStateTypeDef
+#endif
+
+#if defined(STM32H7) || defined(STM32L5)
+#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback   HAL_MMCEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback   HAL_MMCEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback  HAL_MMCEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback  HAL_MMCEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback    HAL_SDEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback    HAL_SDEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback   HAL_SDEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback   HAL_SDEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SD_DriveTransciver_1_8V_Callback          HAL_SD_DriveTransceiver_1_8V_Callback
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __SMARTCARD_ENABLE_IT           __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT          __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE              __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE             __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE  __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE  SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE      SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING    IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_SMBUS_RESET_CR1           SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2           SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START      SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH      SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR             SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE       SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE        SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED   SMBUS_GET_ALERT_ENABLED
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_SPI_1LINE_TX              SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX              SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC             SPI_RESET_CRC
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_UART_GETCLOCKSOURCE       UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION     UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE           UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION         UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE           IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE           IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING         IS_UART_ONE_BIT_SAMPLE
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __USART_ENABLE_IT               __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT              __HAL_USART_DISABLE_IT
+#define __USART_ENABLE                  __HAL_USART_ENABLE
+#define __USART_DISABLE                 __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE      USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE          USART_GETCLOCKSOURCE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define USB_EXTI_LINE_WAKEUP                               USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP                            USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP                            USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT                           __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT                          __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG                            __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG                          __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER             __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER            __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER           __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT                        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT                       __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG                         __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT                        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT                       __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG                         __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup                         HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup                       HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo                                  HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo                                  HAL_PCDEx_SetRxFiFo
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_TIM_SetICPrescalerValue   TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS                __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT                __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS          __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS      __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER             __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter            __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter            __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload         __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload         __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision      __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision      __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler        __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler        __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare            __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare            __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM  TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_ETH_EXTI_ENABLE_IT                   __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT                  __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG                    __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG                  __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER     __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER    __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER   __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE   ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE  ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE      IS_ETH_PROMISCUOUS_MODE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+#define __HAL_LTDC_RELOAD_CONFIG  __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define SAI_OUTPUTDRIVE_DISABLED          SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED           SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED         SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED        SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE                     SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty              SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull   SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull       SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull           SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull      SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full               SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE      IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT               SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE             SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32H7)
+#define HAL_SPDIFRX_ReceiveControlFlow      HAL_SPDIFRX_ReceiveCtrlFlow
+#define HAL_SPDIFRX_ReceiveControlFlow_IT   HAL_SPDIFRX_ReceiveCtrlFlow_IT
+#define HAL_SPDIFRX_ReceiveControlFlow_DMA  HAL_SPDIFRX_ReceiveCtrlFlow_DMA
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3)
+#define HAL_HRTIM_WaveformCounterStart_IT      HAL_HRTIM_WaveformCountStart_IT
+#define HAL_HRTIM_WaveformCounterStart_DMA     HAL_HRTIM_WaveformCountStart_DMA
+#define HAL_HRTIM_WaveformCounterStart         HAL_HRTIM_WaveformCountStart
+#define HAL_HRTIM_WaveformCounterStop_IT       HAL_HRTIM_WaveformCountStop_IT
+#define HAL_HRTIM_WaveformCounterStop_DMA      HAL_HRTIM_WaveformCountStop_DMA
+#define HAL_HRTIM_WaveformCounterStop          HAL_HRTIM_WaveformCountStop
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7)
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE
+#endif /* STM32L4 || STM32F4 || STM32F7 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h
new file mode 100644
index 0000000..a100055
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h
@@ -0,0 +1,585 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the HAL 
+  *          module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_H
+#define __STM32F0xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_conf.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HAL
+  * @{
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Macros
+  * @{
+  */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \
+    defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+    defined(STM32F070xB) || defined(STM32F030x6)
+#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9)  == SYSCFG_FASTMODEPLUS_PA9)  || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6)  == SYSCFG_FASTMODEPLUS_PB6)  || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7)  == SYSCFG_FASTMODEPLUS_PB7)  || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8)  == SYSCFG_FASTMODEPLUS_PB8)  || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9)  == SYSCFG_FASTMODEPLUS_PB9))
+#else
+#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6)  == SYSCFG_FASTMODEPLUS_PB6)  || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7)  == SYSCFG_FASTMODEPLUS_PB7)  || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8)  == SYSCFG_FASTMODEPLUS_PB8)  || \
+                                         (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9)  == SYSCFG_FASTMODEPLUS_PB9))
+#endif
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+#define IS_HAL_REMAP_PIN(RMP) ((RMP) == HAL_REMAP_PA11_PA12)
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL)   (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16)   || \
+                                           ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1)   || \
+                                           ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4))
+#endif /* STM32F091xC || STM32F098xx */
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+  * @{
+  */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+  * @{
+  */
+typedef enum
+{
+  HAL_TICK_FREQ_10HZ         = 100U,
+  HAL_TICK_FREQ_100HZ        = 10U,
+  HAL_TICK_FREQ_1KHZ         = 1U,
+  HAL_TICK_FREQ_DEFAULT      = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+
+/**
+  * @}
+  */
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remapping HAL Pin remapping
+  * @{
+  */
+#define HAL_REMAP_PA11_PA12                 (SYSCFG_CFGR1_PA11_PA12_RMP)  /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins).
+                                                                           0: No remap (pin pair PA9/10 mapped on the pins)
+                                                                           1: Remap (pin pair PA11/12 mapped instead of PA9/10) */
+
+/**
+  * @}
+  */
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection
+  * @note Applicable on STM32F09x
+  * @{
+  */
+#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16     (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1)    /* 00: Timer16 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART1    (SYSCFG_CFGR1_IRDA_ENV_SEL_0)  /* 01: USART1 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART4    (SYSCFG_CFGR1_IRDA_ENV_SEL_1)  /* 10: USART4 is selected as IRDA Modulation enveloppe source */
+
+/**
+  * @}
+  */
+#endif /* STM32F091xC || STM32F098xx */
+
+
+/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO
+  * @{
+  */
+
+/** @brief  Fast-mode Plus driving capability on a specific GPIO
+  */  
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \
+    defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+    defined(STM32F070xB) || defined(STM32F030x6)
+#define SYSCFG_FASTMODEPLUS_PA9        SYSCFG_CFGR1_I2C_FMP_PA9  /*!< Enable Fast-mode Plus on PA9  */
+#define SYSCFG_FASTMODEPLUS_PA10       SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast-mode Plus on PA10 */
+#endif
+#define SYSCFG_FASTMODEPLUS_PB6        SYSCFG_CFGR1_I2C_FMP_PB6  /*!< Enable Fast-mode Plus on PB6  */
+#define SYSCFG_FASTMODEPLUS_PB7        SYSCFG_CFGR1_I2C_FMP_PB7  /*!< Enable Fast-mode Plus on PB7  */
+#define SYSCFG_FASTMODEPLUS_PB8        SYSCFG_CFGR1_I2C_FMP_PB8  /*!< Enable Fast-mode Plus on PB8  */
+#define SYSCFG_FASTMODEPLUS_PB9        SYSCFG_CFGR1_I2C_FMP_PB9  /*!< Enable Fast-mode Plus on PB9  */
+
+/**
+ * @}
+ */
+
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
+  * @brief ISR Wrapper
+  * @note applicable on STM32F09x
+  * @{
+  */
+#define HAL_SYSCFG_ITLINE0                           ( 0x00000000U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE1                           ( 0x00000001U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE2                           ( 0x00000002U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE3                           ( 0x00000003U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE4                           ( 0x00000004U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE5                           ( 0x00000005U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE6                           ( 0x00000006U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE7                           ( 0x00000007U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE8                           ( 0x00000008U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE9                           ( 0x00000009U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE10                          ( 0x0000000AU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE11                          ( 0x0000000BU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE12                          ( 0x0000000CU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE13                          ( 0x0000000DU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE14                          ( 0x0000000EU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE15                          ( 0x0000000FU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE16                          ( 0x00000010U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE17                          ( 0x00000011U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE18                          ( 0x00000012U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE19                          ( 0x00000013U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE20                          ( 0x00000014U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE21                          ( 0x00000015U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE22                          ( 0x00000016U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE23                          ( 0x00000017U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE24                          ( 0x00000018U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE25                          ( 0x00000019U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE26                          ( 0x0000001AU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE27                          ( 0x0000001BU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE28                          ( 0x0000001CU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE29                          ( 0x0000001DU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE30                          ( 0x0000001EU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE31                          ( 0x0000001FU) /*!< Internal define for macro handling */
+
+#define HAL_ITLINE_EWDG           ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */
+#if defined(STM32F091xC)
+#define HAL_ITLINE_PVDOUT         ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */
+#endif
+#define HAL_ITLINE_VDDIO2         ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */
+#define HAL_ITLINE_RTC_WAKEUP     ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define HAL_ITLINE_RTC_TSTAMP     ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define HAL_ITLINE_RTC_ALRA       ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define HAL_ITLINE_FLASH_ITF      ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */
+#define HAL_ITLINE_CRS            ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */
+#define HAL_ITLINE_CLK_CTRL       ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */
+#define HAL_ITLINE_EXTI0          ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */
+#define HAL_ITLINE_EXTI1          ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */
+#define HAL_ITLINE_EXTI2          ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */
+#define HAL_ITLINE_EXTI3          ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */
+#define HAL_ITLINE_EXTI4          ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */
+#define HAL_ITLINE_EXTI5          ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */
+#define HAL_ITLINE_EXTI6          ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */
+#define HAL_ITLINE_EXTI7          ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */
+#define HAL_ITLINE_EXTI8          ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */
+#define HAL_ITLINE_EXTI9          ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */
+#define HAL_ITLINE_EXTI10         ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */
+#define HAL_ITLINE_EXTI11         ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */
+#define HAL_ITLINE_EXTI12         ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */
+#define HAL_ITLINE_EXTI13         ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */
+#define HAL_ITLINE_EXTI14         ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */
+#define HAL_ITLINE_EXTI15         ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */
+#define HAL_ITLINE_TSC_EOA        ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */
+#define HAL_ITLINE_TSC_MCE        ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */
+#define HAL_ITLINE_DMA1_CH1       ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA1_CH2       ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH3       ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH1       ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA2_CH2       ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH4       ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA1_CH5       ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */
+#define HAL_ITLINE_DMA1_CH6       ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */
+#define HAL_ITLINE_DMA1_CH7       ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */
+#define HAL_ITLINE_DMA2_CH3       ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH4       ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA2_CH5       ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */
+#define HAL_ITLINE_ADC            ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */
+#define HAL_ITLINE_COMP1          ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */
+#define HAL_ITLINE_COMP2          ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */
+#define HAL_ITLINE_TIM1_BRK       ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */
+#define HAL_ITLINE_TIM1_UPD       ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */
+#define HAL_ITLINE_TIM1_TRG       ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */
+#define HAL_ITLINE_TIM1_CCU       ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */
+#define HAL_ITLINE_TIM1_CC        ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */
+#define HAL_ITLINE_TIM2           ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */
+#define HAL_ITLINE_TIM3           ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */
+#define HAL_ITLINE_DAC            ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */
+#define HAL_ITLINE_TIM6           ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */
+#define HAL_ITLINE_TIM7           ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */
+#define HAL_ITLINE_TIM14          ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */
+#define HAL_ITLINE_TIM15          ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */
+#define HAL_ITLINE_TIM16          ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */
+#define HAL_ITLINE_TIM17          ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */
+#define HAL_ITLINE_I2C1           ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_I2C2           ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */
+#define HAL_ITLINE_SPI1           ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_SPI2           ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */
+#define HAL_ITLINE_USART1         ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */
+#define HAL_ITLINE_USART2         ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */
+#define HAL_ITLINE_USART3         ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */
+#define HAL_ITLINE_USART4         ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */
+#define HAL_ITLINE_USART5         ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */
+#define HAL_ITLINE_USART6         ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */
+#define HAL_ITLINE_USART7         ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */
+#define HAL_ITLINE_USART8         ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */
+#define HAL_ITLINE_CAN            ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */
+#define HAL_ITLINE_CEC            ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */
+/**
+  * @}
+  */
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+  * @}
+  */  
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+  * @{  
+  */
+
+/** @defgroup HAL_Freeze_Unfreeze_Peripherals HAL Freeze Unfreeze Peripherals
+  * @brief  Freeze/Unfreeze Peripherals in Debug mode 
+  * @{  
+  */
+  
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU()            (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_FREEZE_RTC()            (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_IWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG()         (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_WWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG()         (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM2()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM2()         (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM3()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3()         (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM6()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6()         (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM7()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7()         (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM14()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14()        (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM1()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1()         (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM15()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM15()        (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM16()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM16()        (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM17()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM17()        (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+/**
+  * @}
+  */  
+  
+/** @defgroup Memory_Mapping_Selection Memory Mapping Selection
+  * @{   
+  */
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief  Main Flash memory mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH()        (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief  System Flash memory mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH()  do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+                                             SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0;  \
+                                            }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief  Embedded SRAM mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM()         do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+                                             SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+                                            }while(0) 
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+/**
+  * @}
+  */ 
+
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remap HAL Pin remap 
+  * @brief  Pin remapping enable/disable macros
+  * @param __PIN_REMAP__ This parameter can be a value of @ref HAL_Pin_remapping
+  * @{   
+  */
+#define __HAL_REMAP_PIN_ENABLE(__PIN_REMAP__)          do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__)));                 \
+                                                           SYSCFG->CFGR1 |= (__PIN_REMAP__);                                \
+                                                         }while(0)
+#define __HAL_REMAP_PIN_DISABLE(__PIN_REMAP__)         do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__)));                 \
+                                                           SYSCFG->CFGR1 &= ~(__PIN_REMAP__);                               \
+                                                         }while(0)
+/**
+  * @}
+  */  
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+/** @brief  Fast-mode Plus driving capability enable/disable macros
+  * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO values.
+  *                          That you can find above these macros.
+  */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__)  do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+                                                                SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+                                                               }while(0)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+                                                                CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+                                                               }while(0)
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+  * @{   
+  */
+/** @brief  SYSCFG Break Lockup lock
+  *         Enables and locks the connection of Cortex-M0 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+  * @note   The selected configuration is locked and can be unlocked by system reset
+  */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK()   do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+                                               SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK;    \
+                                              }while(0)
+/**
+  * @}
+  */  
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @defgroup PVD_Lock_Enable PVD Lock
+  * @{  
+  */
+/** @brief  SYSCFG Break PVD lock
+  *         Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+  * @note   The selected configuration is locked and can be unlocked by system reset
+  */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK()      do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+                                               SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK;    \
+                                              }while(0)
+/**
+  * @}
+  */
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @defgroup SRAM_Parity_Lock SRAM Parity Lock
+  * @{
+  */
+/** @brief  SYSCFG Break SRAM PARITY lock
+  *         Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+  * @note   The selected configuration is locked and can be unlocked by system reset
+  */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+                                                 SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK;    \
+                                                }while(0)
+/**
+  * @}
+  */
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PEF)
+/** @defgroup HAL_SYSCFG_Parity_check_on_RAM HAL SYSCFG Parity check on RAM
+  * @brief  Parity check on RAM disable macro
+  * @note   Disabling the parity check on RAM locks the configuration bit.
+  *         To re-enable the parity check on RAM perform a system reset.
+  * @{  
+  */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE()   (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PEF)
+/**
+  * @}
+  */
+#endif /* SYSCFG_CFGR2_SRAM_PEF */
+
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check
+  * @brief  ISR wrapper check
+  * @note This feature is applicable on STM32F09x  
+  * @note Allow to determine interrupt source per line.
+  * @{  
+  */
+#define __HAL_GET_PENDING_IT(__SOURCE__)       (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF))
+/**
+  * @}
+  */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection
+  * @brief  selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register
+  * @note This feature is applicable on STM32F09x
+  * @param __SOURCE__ This parameter can be a value of @ref HAL_IRDA_ENV_SEL
+  * @{  
+  */
+#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__)  do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__))); \
+                                                         SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_IRDA_ENV_SEL); \
+                                                         SYSCFG->CFGR1 |= (__SOURCE__);    \
+                                                        }while(0)
+
+#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION()  ((SYSCFG->CFGR1) & 0x000000C0)
+/**
+  * @}
+  */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+  * @{
+  */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ)  || \
+                           ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+                           ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup HAL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup HAL_Exported_Functions_Group1
+  * @{
+  */    
+/* Initialization and de-initialization functions  ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void              HAL_MspInit(void);
+void              HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+  * @}
+  */
+
+/* Exported variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Variables
+  * @{
+  */
+extern __IO uint32_t uwTick;
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+/**
+  * @}
+  */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+  * @{
+  */    
+
+/* Peripheral Control functions  ************************************************/
+void                HAL_IncTick(void);
+void                HAL_Delay(uint32_t Delay);
+uint32_t            HAL_GetTick(void);
+uint32_t            HAL_GetTickPrio(void);
+HAL_StatusTypeDef   HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void                HAL_SuspendTick(void);
+void                HAL_ResumeTick(void);
+uint32_t            HAL_GetHalVersion(void);
+uint32_t            HAL_GetREVID(void);
+uint32_t            HAL_GetDEVID(void);
+uint32_t            HAL_GetUIDw0(void);
+uint32_t            HAL_GetUIDw1(void);
+uint32_t            HAL_GetUIDw2(void);
+void                HAL_DBGMCU_EnableDBGStopMode(void);
+void                HAL_DBGMCU_DisableDBGStopMode(void);
+void                HAL_DBGMCU_EnableDBGStandbyMode(void);
+void                HAL_DBGMCU_DisableDBGStandbyMode(void);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h
new file mode 100644
index 0000000..e471200
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h
@@ -0,0 +1,133 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CORTEX_H
+#define __STM32F0xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX CORTEX
+  * @{
+  */ 
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+  
+/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
+  * @{
+  */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8    (0x00000000U)
+#define SYSTICK_CLKSOURCE_HCLK         (0x00000004U)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *******************************/
+void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions 
+ *  @brief   Cortex control functions
+ * @{
+ */
+ 
+/* Peripheral Control functions *************************************************/
+uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Private types -------------------------------------------------------------*/ 
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x4)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                      ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+    
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CORTEX_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h
new file mode 100644
index 0000000..b2f6105
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h
@@ -0,0 +1,178 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_def.h
+  * @author  MCD Application Team
+  * @brief   This file contains HAL common defines, enumeration, macros and 
+  *          structures definitions. 
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DEF
+#define __STM32F0xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include 
+
+/* Exported types ------------------------------------------------------------*/
+
+/** 
+  * @brief  HAL Status structures definition  
+  */  
+typedef enum 
+{
+  HAL_OK       = 0x00U,
+  HAL_ERROR    = 0x01U,
+  HAL_BUSY     = 0x02U,
+  HAL_TIMEOUT  = 0x03U
+} HAL_StatusTypeDef;
+
+/** 
+  * @brief  HAL Lock structures definition  
+  */
+typedef enum 
+{
+  HAL_UNLOCKED = 0x00U,
+  HAL_LOCKED   = 0x01U  
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+
+#define UNUSED(X) (void)X      /* To avoid gcc/g++ warnings */
+
+#define HAL_MAX_DELAY      0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) == (BIT))
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                        \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0U)
+
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__ specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose:
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+  /* Reserved for future use */
+  #error " USE_RTOS should be 0 in the current HAL release "
+#else
+  #define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0U)
+
+  #define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0U)
+#endif /* USE_RTOS */
+
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+  #ifndef __weak
+    #define __weak  __attribute__((weak))
+  #endif
+  #ifndef __packed
+    #define __packed  __attribute__((packed))
+  #endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+  #ifndef __weak
+    #define __weak   __attribute__((weak))
+  #endif /* __weak */
+  #ifndef __packed
+    #define __packed __attribute__((__packed__))
+  #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+  #ifndef __ALIGN_BEGIN
+    #define __ALIGN_BEGIN
+  #endif
+  #ifndef __ALIGN_END
+    #define __ALIGN_END      __attribute__ ((aligned (4)))
+  #endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+  #ifndef __ALIGN_END
+    #define __ALIGN_END    __attribute__ ((aligned (4)))
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN  
+    #define __ALIGN_BEGIN
+  #endif /* __ALIGN_BEGIN */
+#else
+  #ifndef __ALIGN_END
+    #define __ALIGN_END
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN      
+    #if defined   (__CC_ARM)      /* ARM Compiler V5*/
+      #define __ALIGN_BEGIN    __align(4)  
+    #elif defined (__ICCARM__)    /* IAR Compiler */
+      #define __ALIGN_BEGIN 
+    #endif /* __CC_ARM */
+  #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/** 
+  * @brief  __NOINLINE definition
+  */ 
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined   (  __GNUC__  )
+/* ARM V4/V5 and V6 & GNU Compiler
+   -------------------------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F0xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h
new file mode 100644
index 0000000..db71942
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h
@@ -0,0 +1,563 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_dma.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_H
+#define __STM32F0xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  DMA Configuration Structure definition  
+  */
+typedef struct
+{
+  uint32_t Direction;                 /*!< Specifies if the data will be transferred from memory to peripheral, 
+                                           from memory to memory or from peripheral to memory.
+                                           This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+  uint32_t PeriphInc;                 /*!< Specifies whether the Peripheral address register should be incremented or not.
+                                           This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+                               
+  uint32_t MemInc;                    /*!< Specifies whether the memory address register should be incremented or not.
+                                           This parameter can be a value of @ref DMA_Memory_incremented_mode */
+  
+  uint32_t PeriphDataAlignment;       /*!< Specifies the Peripheral data width.
+                                           This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+  uint32_t MemDataAlignment;          /*!< Specifies the Memory data width.
+                                           This parameter can be a value of @ref DMA_Memory_data_size */
+                               
+  uint32_t Mode;                      /*!< Specifies the operation mode of the DMAy Channelx.
+                                           This parameter can be a value of @ref DMA_mode
+                                           @note The circular buffer mode cannot be used if the memory-to-memory
+                                                 data transfer is configured on the selected Channel */ 
+
+  uint32_t Priority;                   /*!< Specifies the software priority for the DMAy Channelx.
+                                            This parameter can be a value of @ref DMA_Priority_level */
+} DMA_InitTypeDef;
+
+/**
+  * @brief  HAL DMA State structures definition  
+  */
+typedef enum
+{
+  HAL_DMA_STATE_RESET             = 0x00U,  /*!< DMA not yet initialized or disabled */  
+  HAL_DMA_STATE_READY             = 0x01U,  /*!< DMA initialized and ready for use   */
+  HAL_DMA_STATE_BUSY              = 0x02U,  /*!< DMA process is ongoing              */     
+  HAL_DMA_STATE_TIMEOUT           = 0x03U   /*!< DMA timeout state                   */  
+}HAL_DMA_StateTypeDef;
+
+/** 
+  * @brief  HAL DMA Error Code structure definition  
+  */ 
+typedef enum
+{
+  HAL_DMA_FULL_TRANSFER      = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_HALF_TRANSFER      = 0x01U     /*!< Half Transfer     */
+}HAL_DMA_LevelCompleteTypeDef;      
+
+/** 
+  * @brief  HAL DMA Callback ID structure definition
+  */
+typedef enum
+{
+  HAL_DMA_XFER_CPLT_CB_ID          = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_XFER_HALFCPLT_CB_ID      = 0x01U,    /*!< Half transfer     */
+  HAL_DMA_XFER_ERROR_CB_ID         = 0x02U,    /*!< Error             */ 
+  HAL_DMA_XFER_ABORT_CB_ID         = 0x03U,    /*!< Abort             */ 
+  HAL_DMA_XFER_ALL_CB_ID           = 0x04U     /*!< All               */ 
+    
+}HAL_DMA_CallbackIDTypeDef;                                                                 
+
+/** 
+  * @brief  DMA handle Structure definition  
+  */ 
+typedef struct __DMA_HandleTypeDef
+{  
+  DMA_Channel_TypeDef   *Instance;                                                    /*!< Register base address                  */
+  
+  DMA_InitTypeDef       Init;                                                         /*!< DMA communication parameters           */ 
+  
+  HAL_LockTypeDef       Lock;                                                         /*!< DMA locking object                     */  
+  
+  __IO HAL_DMA_StateTypeDef  State;                                                   /*!< DMA transfer state                     */
+  
+  void                  *Parent;                                                      /*!< Parent object state                    */  
+  
+  void                  (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma);     /*!< DMA transfer complete callback         */
+  
+  void                  (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback    */
+  
+  void                  (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer error callback            */
+  
+  void                  (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer abort callback            */  
+  
+  __IO uint32_t         ErrorCode;                                                    /*!< DMA Error code                         */
+  
+  DMA_TypeDef          *DmaBaseAddress;                                               /*!< DMA Channel Base Address                */
+  
+  uint32_t              ChannelIndex;                                                 /*!< DMA Channel Index                       */
+} DMA_HandleTypeDef;    
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+  * @{
+  */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+  * @{
+  */ 
+#define HAL_DMA_ERROR_NONE          (0x00000000U)    /*!< No error             */
+#define HAL_DMA_ERROR_TE            (0x00000001U)    /*!< Transfer error       */
+#define HAL_DMA_ERROR_NO_XFER       (0x00000004U)    /*!< no ongoin transfer   */
+#define HAL_DMA_ERROR_TIMEOUT       (0x00000020U)    /*!< Timeout error        */
+#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U)    /*!< Not supported mode */     
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+  * @{
+  */ 
+#define DMA_PERIPH_TO_MEMORY         (0x00000000U)        /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH         ((uint32_t)DMA_CCR_DIR)       /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY         ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction     */
+
+/**
+  * @}
+  */
+  
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+  * @{
+  */ 
+#define DMA_PINC_ENABLE        ((uint32_t)DMA_CCR_PINC)  /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE       (0x00000000U)    /*!< Peripheral increment mode Disable */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+  * @{
+  */ 
+#define DMA_MINC_ENABLE         ((uint32_t)DMA_CCR_MINC)  /*!< Memory increment mode Enable  */
+#define DMA_MINC_DISABLE        (0x00000000U)    /*!< Memory increment mode Disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+  * @{
+  */ 
+#define DMA_PDATAALIGN_BYTE          (0x00000000U)       /*!< Peripheral data alignment : Byte     */
+#define DMA_PDATAALIGN_HALFWORD      ((uint32_t)DMA_CCR_PSIZE_0)  /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD          ((uint32_t)DMA_CCR_PSIZE_1)  /*!< Peripheral data alignment : Word     */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+  * @{ 
+  */
+#define DMA_MDATAALIGN_BYTE          (0x00000000U)       /*!< Memory data alignment : Byte     */
+#define DMA_MDATAALIGN_HALFWORD      ((uint32_t)DMA_CCR_MSIZE_0)  /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD          ((uint32_t)DMA_CCR_MSIZE_1)  /*!< Memory data alignment : Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_mode DMA mode
+  * @{
+  */ 
+#define DMA_NORMAL         (0x00000000U)      /*!< Normal Mode                  */
+#define DMA_CIRCULAR       ((uint32_t)DMA_CCR_CIRC)    /*!< Circular Mode                */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+  * @{
+  */
+#define DMA_PRIORITY_LOW             (0x00000000U)    /*!< Priority level : Low       */
+#define DMA_PRIORITY_MEDIUM          ((uint32_t)DMA_CCR_PL_0)  /*!< Priority level : Medium    */
+#define DMA_PRIORITY_HIGH            ((uint32_t)DMA_CCR_PL_1)  /*!< Priority level : High      */
+#define DMA_PRIORITY_VERY_HIGH       ((uint32_t)DMA_CCR_PL)    /*!< Priority level : Very_High */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+  * @{
+  */
+#define DMA_IT_TC                         ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT                         ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE                         ((uint32_t)DMA_CCR_TEIE)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+  * @{
+  */ 
+
+#define DMA_FLAG_GL1                      (0x00000001U) /*!< Channel 1 global interrupt flag  */
+#define DMA_FLAG_TC1                      (0x00000002U) /*!< Channel 1 transfer complete flag */
+#define DMA_FLAG_HT1                      (0x00000004U) /*!< Channel 1 half transfer flag     */
+#define DMA_FLAG_TE1                      (0x00000008U) /*!< Channel 1 transfer error flag    */
+#define DMA_FLAG_GL2                      (0x00000010U) /*!< Channel 2 global interrupt flag  */
+#define DMA_FLAG_TC2                      (0x00000020U) /*!< Channel 2 transfer complete flag */
+#define DMA_FLAG_HT2                      (0x00000040U) /*!< Channel 2 half transfer flag     */
+#define DMA_FLAG_TE2                      (0x00000080U) /*!< Channel 2 transfer error flag    */
+#define DMA_FLAG_GL3                      (0x00000100U) /*!< Channel 3 global interrupt flag  */
+#define DMA_FLAG_TC3                      (0x00000200U) /*!< Channel 3 transfer complete flag */
+#define DMA_FLAG_HT3                      (0x00000400U) /*!< Channel 3 half transfer flag     */
+#define DMA_FLAG_TE3                      (0x00000800U) /*!< Channel 3 transfer error flag    */
+#define DMA_FLAG_GL4                      (0x00001000U) /*!< Channel 4 global interrupt flag  */
+#define DMA_FLAG_TC4                      (0x00002000U) /*!< Channel 4 transfer complete flag */
+#define DMA_FLAG_HT4                      (0x00004000U) /*!< Channel 4 half transfer flag     */
+#define DMA_FLAG_TE4                      (0x00008000U) /*!< Channel 4 transfer error flag    */
+#define DMA_FLAG_GL5                      (0x00010000U) /*!< Channel 5 global interrupt flag  */
+#define DMA_FLAG_TC5                      (0x00020000U) /*!< Channel 5 transfer complete flag */
+#define DMA_FLAG_HT5                      (0x00040000U) /*!< Channel 5 half transfer flag     */
+#define DMA_FLAG_TE5                      (0x00080000U) /*!< Channel 5 transfer error flag    */
+#define DMA_FLAG_GL6                      (0x00100000U) /*!< Channel 6 global interrupt flag  */
+#define DMA_FLAG_TC6                      (0x00200000U) /*!< Channel 6 transfer complete flag */
+#define DMA_FLAG_HT6                      (0x00400000U) /*!< Channel 6 half transfer flag     */
+#define DMA_FLAG_TE6                      (0x00800000U) /*!< Channel 6 transfer error flag    */
+#define DMA_FLAG_GL7                      (0x01000000U) /*!< Channel 7 global interrupt flag  */
+#define DMA_FLAG_TC7                      (0x02000000U) /*!< Channel 7 transfer complete flag */
+#define DMA_FLAG_HT7                      (0x04000000U) /*!< Channel 7 half transfer flag     */
+#define DMA_FLAG_TE7                      (0x08000000U) /*!< Channel 7 transfer error flag    */
+
+/**
+  * @}
+  */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_remapping HAL DMA remapping
+  *        Elements values convention: 0xYYYYYYYY
+  *           - YYYYYYYY  : Position in the SYSCFG register CFGR1
+  * @{  
+  */
+#define DMA_REMAP_ADC_DMA_CH2         ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap 
+                                                                         0: No remap (ADC DMA requests mapped on DMA channel 1
+                                                                         1: Remap (ADC DMA requests mapped on DMA channel 2 */
+#define DMA_REMAP_USART1_TX_DMA_CH4   ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap 
+                                                                         0: No remap (USART1_TX DMA request mapped on DMA channel 2
+                                                                         1: Remap (USART1_TX DMA request mapped on DMA channel 4 */
+#define DMA_REMAP_USART1_RX_DMA_CH5   ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap 
+                                                                         0: No remap (USART1_RX DMA request mapped on DMA channel 3
+                                                                         1: Remap (USART1_RX DMA request mapped on DMA channel 5 */
+#define DMA_REMAP_TIM16_DMA_CH4       ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap
+                                                                         0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3)
+                                                                         1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */
+#define DMA_REMAP_TIM17_DMA_CH2       ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap
+                                                                         0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1
+                                                                         1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */
+#if defined (STM32F070xB)
+#define DMA_REMAP_USART3_DMA_CH32     ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F070xB devices only.
+                                                                         0: Disabled, need to remap before use 
+                                                                         1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */
+
+#endif
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define DMA_REMAP_TIM16_DMA_CH6       ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only
+                                                                         0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit)
+                                                                         1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */
+#define DMA_REMAP_TIM17_DMA_CH7       ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only
+                                                                         0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit)
+                                                                         1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */
+#define DMA_REMAP_SPI2_DMA_CH67       ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only.
+                                                                         0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively)
+                                                                         1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define DMA_REMAP_USART2_DMA_CH67     ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only.
+                                                                         0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively)
+                                                                         1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define DMA_REMAP_USART3_DMA_CH32     ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only.
+                                                                         0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively)
+                                                                         1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */
+#define DMA_REMAP_I2C1_DMA_CH76       ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only.
+                                                                         0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively)
+                                                                         1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */
+#define DMA_REMAP_TIM1_DMA_CH6        ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only.
+                                                                         0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively)
+                                                                         1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */
+#define DMA_REMAP_TIM2_DMA_CH7        ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only.
+                                                                         0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively)
+                                                                         1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */
+#define DMA_REMAP_TIM3_DMA_CH6        ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only.
+                                                                         0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4)
+                                                                         1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */
+#endif
+
+/**
+  * @}
+  */
+
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+  * @{
+  */
+
+/** @brief  Reset DMA handle state
+  * @param  __HANDLE__ DMA handle.
+  * @retval None
+  */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+  * @brief  Enable the specified DMA Channel.
+  * @param  __HANDLE__ DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE(__HANDLE__)        ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
+
+/**
+  * @brief  Disable the specified DMA Channel.
+  * @param  __HANDLE__ DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE(__HANDLE__)       ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
+
+
+/* Interrupt & Flag management */
+
+/**
+  * @brief  Enables the specified DMA Channel interrupts.
+  * @param  __HANDLE__ DMA handle
+  * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. 
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified DMA Channel interrupts.
+  * @param  __HANDLE__ DMA handle
+  * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. 
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified DMA Channel interrupt is enabled or disabled.
+  * @param  __HANDLE__ DMA handle
+  * @param  __INTERRUPT__ specifies the DMA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval The state of DMA_IT (SET or RESET).
+  */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
+
+/**
+  * @brief  Returns the number of remaining data units in the current DMAy Channelx transfer.
+  * @param  __HANDLE__ DMA handle
+  *   
+  * @retval The number of remaining data units in the current DMA Channel transfer.
+  */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief  DMA remapping enable/disable macros
+  * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_remapping
+  */
+#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__)   do {assert_param(IS_DMA_REMAP((__DMA_REMAP__)));                  \
+                                                           SYSCFG->CFGR1 |= (__DMA_REMAP__);                              \
+                                                         }while(0)
+#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__)  do {assert_param(IS_DMA_REMAP((__DMA_REMAP__)));                  \
+                                                           SYSCFG->CFGR1 &= ~(__DMA_REMAP__);                             \
+                                                         }while(0)
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+/**
+  * @}
+  */
+
+/* Include DMA HAL Extension module */
+#include "stm32f0xx_hal_dma_ex.h"   
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+  * @{
+  */
+/* Input and Output operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t             HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup DMA_Private_Macros
+  * @{
+  */
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_PERIPH)  || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) 
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+                                            ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE)  || \
+                                        ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE)     || \
+                                           ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+                                           ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE)     || \
+                                       ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+                                       ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL )  || \
+                           ((MODE) == DMA_CIRCULAR))
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW )   || \
+                                   ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+                                   ((PRIORITY) == DMA_PRIORITY_HIGH)   || \
+                                   ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) 
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2)          || \
+                              ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \
+                              ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \
+                              ((RMP) == DMA_REMAP_TIM16_DMA_CH4)     || \
+                              ((RMP) == DMA_REMAP_TIM17_DMA_CH2)     || \
+                              ((RMP) == DMA_REMAP_TIM16_DMA_CH6)     || \
+                              ((RMP) == DMA_REMAP_TIM17_DMA_CH7)     || \
+                              ((RMP) == DMA_REMAP_SPI2_DMA_CH67)     || \
+                              ((RMP) == DMA_REMAP_USART2_DMA_CH67)   || \
+                              ((RMP) == DMA_REMAP_USART3_DMA_CH32)   || \
+                              ((RMP) == DMA_REMAP_I2C1_DMA_CH76)     || \
+                              ((RMP) == DMA_REMAP_TIM1_DMA_CH6)      || \
+                              ((RMP) == DMA_REMAP_TIM2_DMA_CH7)      || \
+                              ((RMP) == DMA_REMAP_TIM3_DMA_CH6))
+#elif defined (STM32F070xB)
+#define IS_DMA_REMAP(RMP)     (((RMP) == DMA_REMAP_USART3_DMA_CH32)  || \
+                              ((RMP) == DMA_REMAP_ADC_DMA_CH2)       || \
+                              ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \
+                              ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \
+                              ((RMP) == DMA_REMAP_TIM16_DMA_CH4)     || \
+                              ((RMP) == DMA_REMAP_TIM17_DMA_CH2))
+#else
+#define IS_DMA_REMAP(RMP)     (((RMP) == DMA_REMAP_ADC_DMA_CH2)      || \
+                              ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \
+                              ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \
+                              ((RMP) == DMA_REMAP_TIM16_DMA_CH4)     || \
+                              ((RMP) == DMA_REMAP_TIM17_DMA_CH2))
+#endif
+
+#endif /* SYSCFG_CFGR1_DMA_RMP */  
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h
new file mode 100644
index 0000000..185f833
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h
@@ -0,0 +1,811 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_dma_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_EX_H
+#define __STM32F0xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMAEx DMAEx
+  * @brief DMA HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
+  * @{
+  */ 
+#define DMA1_CHANNEL1_RMP                                     0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL2_RMP                                     0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL3_RMP                                     0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL4_RMP                                     0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL5_RMP                                     0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#if !defined(STM32F030xC)
+#define DMA1_CHANNEL6_RMP                                     0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL7_RMP                                     0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL1_RMP                                     0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL2_RMP                                     0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL3_RMP                                     0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL4_RMP                                     0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL5_RMP                                     0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#endif /* !defined(STM32F030xC) */
+
+/****************** DMA1 remap bit field definition********************/
+/* DMA1 - Channel 1 */
+#define HAL_DMA1_CH1_DEFAULT      (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT)       /*!< Default remap position for DMA1 */   
+#define HAL_DMA1_CH1_ADC          (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC)       /*!< Remap ADC on DMA1 Channel 1*/   
+#define HAL_DMA1_CH1_TIM17_CH1    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define HAL_DMA1_CH1_TIM17_UP     (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP)  /*!< Remap TIM17 up on DMA1 channel 1 */ 
+#define HAL_DMA1_CH1_USART1_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */ 
+#define HAL_DMA1_CH1_USART2_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */ 
+#define HAL_DMA1_CH1_USART3_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */ 
+#define HAL_DMA1_CH1_USART4_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */ 
+#define HAL_DMA1_CH1_USART5_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */ 
+#define HAL_DMA1_CH1_USART6_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH1_USART7_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */ 
+#define HAL_DMA1_CH1_USART8_RX    (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */ 
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 2 */
+#define HAL_DMA1_CH2_DEFAULT      (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT)       /*!< Default remap position for DMA1 */   
+#define HAL_DMA1_CH2_ADC          (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC)       /*!< Remap ADC on DMA1 channel 2 */  
+#define HAL_DMA1_CH2_I2C1_TX      (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX)   /*!< Remap I2C1 Tx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_SPI1_RX      (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX)   /*!< Remap SPI1 Rx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_TIM1_CH1     (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1)  /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_CH1    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_UP     (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP)  /*!< Remap TIM17 up on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_USART1_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_USART2_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_USART3_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_USART4_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_USART5_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_USART6_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH2_USART7_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */ 
+#define HAL_DMA1_CH2_USART8_TX    (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */ 
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 3 */
+#define HAL_DMA1_CH3_DEFAULT      (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT)       /*!< Default remap position for DMA1 */   
+#define HAL_DMA1_CH3_TIM6_UP      (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP)   /*!< Remap TIM6 up on DMA1 channel 3 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_DAC_CH1      (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1)   /*!< Remap DAC Channel 1on DMA1 channel 3 */ 
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_I2C1_RX      (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX)   /*!< Remap I2C1 Rx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_SPI1_TX      (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX)   /*!< Remap SPI1 Tx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_TIM1_CH2     (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2)  /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_TIM2_CH2     (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2)  /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_TIM16_CH1    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM16_UP     (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP)  /*!< Remap TIM16 up on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_USART1_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_USART2_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_USART3_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_USART4_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_USART5_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_USART6_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_USART7_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */ 
+#define HAL_DMA1_CH3_USART8_RX    (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */ 
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 4 */
+#define HAL_DMA1_CH4_DEFAULT      (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT)       /*!< Default remap position for DMA1 */   
+#define HAL_DMA1_CH4_TIM7_UP      (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP)   /*!< Remap TIM7 up on DMA1 channel 4 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_DAC_CH2      (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2)   /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_I2C2_TX      (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX)   /*!< Remap I2C2 Tx on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_SPI2_RX      (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX)   /*!< Remap SPI2 Rx on DMA1 channel 4 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_TIM2_CH4     (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4)  /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_TIM3_CH1     (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1)  /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM3_TRIG    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_TIM16_CH1    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_UP     (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP)  /*!< Remap TIM16 up on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_USART1_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_USART2_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_USART3_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_USART4_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_USART5_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_USART6_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_USART7_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */ 
+#define HAL_DMA1_CH4_USART8_TX    (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */ 
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 5 */
+#define HAL_DMA1_CH5_DEFAULT      (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT)       /*!< Default remap position for DMA1 */   
+#define HAL_DMA1_CH5_I2C2_RX      (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX)   /*!< Remap I2C2 Rx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_SPI2_TX      (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX)   /*!< Remap SPI1 Tx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_TIM1_CH3     (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3)  /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART1_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_USART2_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_USART3_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_USART4_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_USART5_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_USART6_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */ 
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH5_USART7_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */ 
+#define HAL_DMA1_CH5_USART8_RX    (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */ 
+#endif /* !defined(STM32F030xC) */
+
+#if !defined(STM32F030xC)
+/* DMA1 - Channel 6 */
+#define HAL_DMA1_CH6_DEFAULT      (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT)       /*!< Default remap position for DMA1 */   
+#define HAL_DMA1_CH6_I2C1_TX      (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX)   /*!< Remap I2C1 Tx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_SPI2_RX      (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX)   /*!< Remap SPI2 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_TIM1_CH1     (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1)  /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH2     (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2)  /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH3     (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3)  /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_CH1     (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1)  /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_TRIG    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_TIM16_CH1    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_UP     (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP)  /*!< Remap TIM16 up on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART1_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART2_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART3_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART4_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART5_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART6_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART7_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */ 
+#define HAL_DMA1_CH6_USART8_RX    (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */ 
+/* DMA1 - Channel 7 */
+#define HAL_DMA1_CH7_DEFAULT      (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT)       /*!< Default remap position for DMA1 */   
+#define HAL_DMA1_CH7_I2C1_RX      (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX)   /*!< Remap I2C1 Rx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_SPI2_TX      (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX)   /*!< Remap SPI2 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_TIM2_CH2     (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2)  /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH4     (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4)  /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_CH1    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_UP     (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP)  /*!< Remap TIM17 up on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART1_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART2_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART3_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART4_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART5_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART6_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART7_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */ 
+#define HAL_DMA1_CH7_USART8_TX    (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
+
+/****************** DMA2 remap bit field definition********************/
+/* DMA2 - Channel 1 */
+#define HAL_DMA2_CH1_DEFAULT      (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT)       /*!< Default remap position for DMA2 */   
+#define HAL_DMA2_CH1_I2C2_TX      (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX)   /*!< Remap I2C2 TX on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART1_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART2_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART3_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART4_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART5_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART6_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART7_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */ 
+#define HAL_DMA2_CH1_USART8_TX    (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */ 
+/* DMA2 - Channel 2 */
+#define HAL_DMA2_CH2_DEFAULT      (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT)       /*!< Default remap position for DMA2 */   
+#define HAL_DMA2_CH2_I2C2_RX      (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX)   /*!< Remap I2C2 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART1_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART2_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART3_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART4_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART5_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART6_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART7_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */ 
+#define HAL_DMA2_CH2_USART8_RX    (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */ 
+/* DMA2 - Channel 3 */
+#define HAL_DMA2_CH3_DEFAULT      (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT)       /*!< Default remap position for DMA2 */   
+#define HAL_DMA2_CH3_TIM6_UP      (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP)   /*!< Remap TIM6 up on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_DAC_CH1      (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1)   /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define HAL_DMA2_CH3_SPI1_RX      (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX)   /*!< Remap SPI1 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART1_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART2_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART3_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART4_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART5_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART6_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART7_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */ 
+#define HAL_DMA2_CH3_USART8_RX    (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */ 
+/* DMA2 - Channel 4 */
+#define HAL_DMA2_CH4_DEFAULT      (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT)       /*!< Default remap position for DMA2 */   
+#define HAL_DMA2_CH4_TIM7_UP      (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP)   /*!< Remap TIM7 up on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_DAC_CH2      (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2)   /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define HAL_DMA2_CH4_SPI1_TX      (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX)   /*!< Remap SPI1 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART1_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART2_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART3_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART4_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART5_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART6_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART7_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */ 
+#define HAL_DMA2_CH4_USART8_TX    (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */ 
+/* DMA2 - Channel 5 */
+#define HAL_DMA2_CH5_DEFAULT      (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT)       /*!< Default remap position for DMA2 */   
+#define HAL_DMA2_CH5_ADC          (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC)       /*!< Remap ADC on DMA2 channel 5 */  
+#define HAL_DMA2_CH5_USART1_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */ 
+#define HAL_DMA2_CH5_USART2_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */ 
+#define HAL_DMA2_CH5_USART3_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */ 
+#define HAL_DMA2_CH5_USART4_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */ 
+#define HAL_DMA2_CH5_USART5_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */ 
+#define HAL_DMA2_CH5_USART6_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */ 
+#define HAL_DMA2_CH5_USART7_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */ 
+#define HAL_DMA2_CH5_USART8_TX    (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */ 
+#endif /* !defined(STM32F030xC) */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) 
+#define IS_HAL_DMA1_REMAP(REQUEST)  (((REQUEST) == HAL_DMA1_CH1_DEFAULT)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_ADC)       ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_TIM17_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART7_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART8_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_ADC)       ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_I2C1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_SPI1_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_I2C1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_TIM17_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART7_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART8_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM6_UP)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_DAC_CH1)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_I2C1_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_SPI1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM2_CH2)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM16_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART7_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART8_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM7_UP)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_DAC_CH2)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_I2C2_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_SPI2_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM2_CH4)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM16_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART7_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART8_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_I2C2_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_SPI2_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART7_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART8_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_I2C1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_SPI2_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_TIM1_CH1)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_TIM1_CH2)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_TIM1_CH3)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_TIM3_CH1)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_TIM3_TRIG) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_TIM16_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_TIM16_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART7_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH6_USART8_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_I2C1_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_SPI2_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_TIM2_CH2)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_TIM2_CH4)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_TIM17_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_TIM17_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART7_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH7_USART8_TX))
+
+#define IS_HAL_DMA2_REMAP(REQUEST)  (((REQUEST) == HAL_DMA2_CH1_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_I2C2_TX)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART7_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH1_USART8_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_I2C2_RX)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART7_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH2_USART8_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_TIM6_UP)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_DAC_CH1)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_SPI1_RX)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART7_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH3_USART8_RX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_TIM7_UP)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_DAC_CH2)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_SPI1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART7_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH4_USART8_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_ADC)       ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\
+                                    ((REQUEST) == HAL_DMA2_CH5_USART8_TX ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+#define IS_HAL_DMA1_REMAP(REQUEST)  (((REQUEST) == HAL_DMA1_CH1_DEFAULT)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_ADC)       ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_TIM17_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_ADC)       ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_I2C1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_SPI1_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_I2C1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_TIM17_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM6_UP)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_I2C1_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_SPI1_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_TIM16_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM7_UP)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_I2C2_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_SPI2_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_TIM16_UP)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_DEFAULT)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_I2C2_RX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_SPI2_TX)   ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3)  ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+                                    ((REQUEST) == HAL_DMA1_CH5_USART6_RX))
+#endif /* STM32F030xC */
+
+/**
+  * @}
+  */ 
+#endif /* STM32F091xC  || STM32F098xx || STM32F030xC */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup DMAEx_Exported_Macros DMAEx Exported Macros
+  * @{
+  */
+/* Interrupt & Flag management */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+/**
+  * @brief  Returns the current DMA Channel transfer complete flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+   DMA_FLAG_TC7)
+
+/**
+  * @brief  Returns the current DMA Channel half transfer complete flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified half transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+   DMA_FLAG_HT7)
+
+/**
+  * @brief  Returns the current DMA Channel transfer error flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+   DMA_FLAG_TE7)
+
+/**
+  * @brief  Return the current DMA Channel Global interrupt flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+   DMA_FLAG_GL7)
+
+/**
+  * @brief  Get the DMA Channel pending flags.
+  * @param  __HANDLE__ DMA handle
+  * @param  __FLAG__ Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_7 to select the DMA Channel flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)   (DMA1->ISR & (__FLAG__))
+
+/**
+  * @brief  Clears the DMA Channel pending flags.
+  * @param  __HANDLE__ DMA handle
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_7 to select the DMA Channel flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+/**
+  * @brief  Returns the current DMA Channel transfer complete flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+   DMA_FLAG_TC5)
+
+/**
+  * @brief  Returns the current DMA Channel half transfer complete flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified half transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+   DMA_FLAG_HT5)
+
+/**
+  * @brief  Returns the current DMA Channel transfer error flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+   DMA_FLAG_TE5)
+
+/**
+  * @brief  Return the current DMA Channel Global interrupt flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\
+   DMA_FLAG_GL5)
+
+/**
+  * @brief  Get the DMA Channel pending flags.
+  * @param  __HANDLE__ DMA handle
+  * @param  __FLAG__ Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+  (DMA1->ISR & (__FLAG__)))
+
+/**
+  * @brief  Clears the DMA Channel pending flags.
+  * @param  __HANDLE__ DMA handle
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+  (DMA1->IFCR = (__FLAG__)))
+
+#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */
+/**
+  * @brief  Returns the current DMA Channel transfer complete flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+   DMA_FLAG_TC5)
+
+/**
+  * @brief  Returns the current DMA Channel half transfer complete flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified half transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+   DMA_FLAG_HT5)
+
+/**
+  * @brief  Returns the current DMA Channel transfer error flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+   DMA_FLAG_TE5)
+
+/**
+  * @brief  Return the current DMA Channel Global interrupt flag.
+  * @param  __HANDLE__ DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+   DMA_FLAG_GL5)
+
+/**
+  * @brief  Get the DMA Channel pending flags.
+  * @param  __HANDLE__ DMA handle
+  * @param  __FLAG__ Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_5 to select the DMA Channel flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)   (DMA1->ISR & (__FLAG__))
+
+/**
+  * @brief  Clears the DMA Channel pending flags.
+  * @param  __HANDLE__ DMA handle
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_5 to select the DMA Channel flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#endif
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define __HAL_DMA1_REMAP(__REQUEST__)                                                              \
+         do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__));                                             \
+              DMA1->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \
+              DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU);                                     \
+  }while(0)
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_DMA2_REMAP(__REQUEST__)                                                              \
+         do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__));                                             \
+              DMA2->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \
+              DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU);                                     \
+         }while(0)
+#endif /* STM32F091xC || STM32F098xx */
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h
new file mode 100644
index 0000000..7dc4823
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h
@@ -0,0 +1,375 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_exti.h
+  * @author  MCD Application Team
+  * @brief   Header file of EXTI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_EXTI_H
+#define STM32F0xx_HAL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup EXTI EXTI
+  * @brief EXTI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup EXTI_Exported_Types EXTI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL EXTI common Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_EXTI_COMMON_CB_ID          = 0x00U
+} EXTI_CallbackIDTypeDef;
+
+/**
+  * @brief  EXTI Handle structure definition
+  */
+typedef struct
+{
+  uint32_t Line;                    /*!<  Exti line number */
+  void (* PendingCallback)(void);   /*!<  Exti pending callback */
+} EXTI_HandleTypeDef;
+
+/**
+  * @brief  EXTI Configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Line;      /*!< The Exti line to be configured. This parameter
+                           can be a value of @ref EXTI_Line */
+  uint32_t Mode;      /*!< The Exit Mode to be configured for a core.
+                           This parameter can be a combination of @ref EXTI_Mode */
+  uint32_t Trigger;   /*!< The Exti Trigger to be configured. This parameter
+                           can be a value of @ref EXTI_Trigger */
+  uint32_t GPIOSel;   /*!< The Exti GPIO multiplexer selection to be configured.
+                           This parameter is only possible for line 0 to 15. It
+                           can be a value of @ref EXTI_GPIOSel */
+} EXTI_ConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Line  EXTI Line
+  * @{
+  */
+#define EXTI_LINE_0                        (EXTI_GPIO        | 0x00u)    /*!< External interrupt line 0 */
+#define EXTI_LINE_1                        (EXTI_GPIO        | 0x01u)    /*!< External interrupt line 1 */
+#define EXTI_LINE_2                        (EXTI_GPIO        | 0x02u)    /*!< External interrupt line 2 */
+#define EXTI_LINE_3                        (EXTI_GPIO        | 0x03u)    /*!< External interrupt line 3 */
+#define EXTI_LINE_4                        (EXTI_GPIO        | 0x04u)    /*!< External interrupt line 4 */
+#define EXTI_LINE_5                        (EXTI_GPIO        | 0x05u)    /*!< External interrupt line 5 */
+#define EXTI_LINE_6                        (EXTI_GPIO        | 0x06u)    /*!< External interrupt line 6 */
+#define EXTI_LINE_7                        (EXTI_GPIO        | 0x07u)    /*!< External interrupt line 7 */
+#define EXTI_LINE_8                        (EXTI_GPIO        | 0x08u)    /*!< External interrupt line 8 */
+#define EXTI_LINE_9                        (EXTI_GPIO        | 0x09u)    /*!< External interrupt line 9 */
+#define EXTI_LINE_10                       (EXTI_GPIO        | 0x0Au)    /*!< External interrupt line 10 */
+#define EXTI_LINE_11                       (EXTI_GPIO        | 0x0Bu)    /*!< External interrupt line 11 */
+#define EXTI_LINE_12                       (EXTI_GPIO        | 0x0Cu)    /*!< External interrupt line 12 */
+#define EXTI_LINE_13                       (EXTI_GPIO        | 0x0Du)    /*!< External interrupt line 13 */
+#define EXTI_LINE_14                       (EXTI_GPIO        | 0x0Eu)    /*!< External interrupt line 14 */
+#define EXTI_LINE_15                       (EXTI_GPIO        | 0x0Fu)    /*!< External interrupt line 15 */
+
+#if defined (EXTI_IMR_MR16)
+#define EXTI_LINE_16                       (EXTI_CONFIG      | 0x10u)    /*!< External interrupt line 16 Connected to the PVD Output */
+#else
+#define EXTI_LINE_16                       (EXTI_RESERVED    | 0x10u)
+#endif /* EXTI_IMR_MR16 */
+
+#define EXTI_LINE_17                       (EXTI_CONFIG      | 0x11u)    /*!< External interrupt line 17 Connected to the RTC Alarm event */
+
+#if defined (EXTI_IMR_MR18)
+#define EXTI_LINE_18                       (EXTI_CONFIG      | 0x12u)    /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
+#else
+#define EXTI_LINE_18                       (EXTI_RESERVED    | 0x12u)
+#endif /* EXTI_IMR_MR18 */
+
+#define EXTI_LINE_19                       (EXTI_CONFIG      | 0x13u)    /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+
+#if defined (EXTI_IMR_MR20)
+#define EXTI_LINE_20                       (EXTI_CONFIG      | 0x14u)    /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event  */
+#else
+#define EXTI_LINE_20                       (EXTI_RESERVED    | 0x14u)
+#endif /* EXTI_IMR_MR20 */
+
+#if defined (EXTI_IMR_MR21)
+#define EXTI_LINE_21                       (EXTI_CONFIG      | 0x15u)    /*!< External interrupt line 21 Connected to the Comparator 1 output */
+#else
+#define EXTI_LINE_21                       (EXTI_RESERVED    | 0x15u)
+#endif /* EXTI_IMR_MR21 */
+
+#if defined (EXTI_IMR_MR22)
+#define EXTI_LINE_22                       (EXTI_CONFIG      | 0x16u)    /*!< External interrupt line 22 Connected to the Comparator 2 output */
+#else
+#define EXTI_LINE_22                       (EXTI_RESERVED    | 0x16u)
+#endif /* EXTI_IMR_MR22 */
+
+#if defined (EXTI_IMR_MR23)
+#define EXTI_LINE_23                       (EXTI_DIRECT      | 0x17u)    /*!< External interrupt line 23 Connected to the internal I2C1 wakeup event  */
+#else
+#define EXTI_LINE_23                       (EXTI_RESERVED    | 0x17u)
+#endif /* EXTI_IMR_MR23 */
+
+#define EXTI_LINE_24                       (EXTI_RESERVED    | 0x18u)
+
+#if defined (EXTI_IMR_MR25)
+#define EXTI_LINE_25                       (EXTI_CONFIG      | 0x19u)    /*!< External interrupt line 25 Connected to the internal USART1 wakeup event  */
+#else
+#define EXTI_LINE_25                       (EXTI_RESERVED    | 0x19u)
+#endif /* EXTI_IMR_MR25 */
+
+#if defined (EXTI_IMR_MR26)
+#define EXTI_LINE_26                       (EXTI_CONFIG      | 0x1Au)    /*!< External interrupt line 26 Connected to the internal USART2 wakeup event  */
+#else
+#define EXTI_LINE_26                       (EXTI_RESERVED    | 0x1Au)
+#endif /* EXTI_IMR_MR26 */
+
+#if defined (EXTI_IMR_MR27)
+#define EXTI_LINE_27                       (EXTI_CONFIG      | 0x1Bu)    /*!< External interrupt line 27 Connected to the internal CEC wakeup event  */
+#else
+#define EXTI_LINE_27                       (EXTI_RESERVED    | 0x1Bu)
+#endif /* EXTI_IMR_MR27 */
+
+#if defined (EXTI_IMR_MR28)
+#define EXTI_LINE_28                       (EXTI_CONFIG      | 0x1Cu)    /*!< External interrupt line 28 Connected to the  internal USART3 wakeup event   */
+#else
+#define EXTI_LINE_28                       (EXTI_RESERVED    | 0x1Cu)
+#endif /* EXTI_IMR_MR28 */
+
+#define EXTI_LINE_29                       (EXTI_RESERVED    | 0x1Du)
+#define EXTI_LINE_30                       (EXTI_RESERVED    | 0x1Eu)
+
+#if defined (EXTI_IMR_MR31)
+#define EXTI_LINE_31                       (EXTI_CONFIG      | 0x1Fu)    /*!< External interrupt line 31 Connected to the VDDIO2 supply comparator output  */
+#else
+#define EXTI_LINE_31                       (EXTI_RESERVED    | 0x1Fu)
+#endif /* EXTI_IMR_MR31 */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Mode  EXTI Mode
+  * @{
+  */
+#define EXTI_MODE_NONE                      0x00000000u
+#define EXTI_MODE_INTERRUPT                 0x00000001u
+#define EXTI_MODE_EVENT                     0x00000002u
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Trigger  EXTI Trigger
+  * @{
+  */
+#define EXTI_TRIGGER_NONE                   0x00000000u
+#define EXTI_TRIGGER_RISING                 0x00000001u
+#define EXTI_TRIGGER_FALLING                0x00000002u
+#define EXTI_TRIGGER_RISING_FALLING         (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_GPIOSel  EXTI GPIOSel
+  * @brief
+  * @{
+  */
+#define EXTI_GPIOA                          0x00000000u
+#define EXTI_GPIOB                          0x00000001u
+#define EXTI_GPIOC                          0x00000002u
+#if defined (GPIOD)
+#define EXTI_GPIOD                          0x00000003u
+#endif /* GPIOD */
+#if defined (GPIOE)
+#define EXTI_GPIOE                          0x00000004u
+#endif /* GPIOE */
+#define EXTI_GPIOF                          0x00000005u
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+/**
+  * @brief  EXTI Line property definition
+  */
+#define EXTI_PROPERTY_SHIFT                 24u
+#define EXTI_DIRECT                         (0x01uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_CONFIG                         (0x02uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_GPIO                           ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
+#define EXTI_RESERVED                       (0x08uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_PROPERTY_MASK                  (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO)
+
+/**
+  * @brief  EXTI bit usage
+  */
+#define EXTI_PIN_MASK                       0x0000001Fu
+
+/**
+  * @brief  EXTI Mask for interrupt & event mode
+  */
+#define EXTI_MODE_MASK                      (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
+
+/**
+  * @brief  EXTI Mask for trigger possibilities
+  */
+#define EXTI_TRIGGER_MASK                   (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+
+/**
+  * @brief  EXTI Line number
+  */
+#define EXTI_LINE_NB                        32uL
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Macros EXTI Private Macros
+  * @{
+  */
+#define IS_EXTI_LINE(__EXTI_LINE__)          ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+                                             ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT)   || \
+                                              (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG)   || \
+                                              (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))    && \
+                                              (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
+
+#define IS_EXTI_MODE(__EXTI_LINE__)          ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+                                              (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+
+#define IS_EXTI_TRIGGER(__EXTI_LINE__)       (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
+
+#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__)  ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
+
+#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__)   (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
+
+#if defined (GPIOE)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF))
+#elif defined (GPIOD)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOF))
+#else
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOF))
+#endif /* GPIOE */
+
+#define IS_EXTI_GPIO_PIN(__PIN__)       ((__PIN__) < 16u)
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
+  * @brief    EXTI Exported Functions
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
+  * @brief    Configuration functions
+  * @{
+  */
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
+  * @brief    IO operation functions
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void              HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
+uint32_t          HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h
new file mode 100644
index 0000000..ecce5da
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h
@@ -0,0 +1,353 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_flash.h
+  * @author  MCD Application Team
+  * @brief   Header file of Flash HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_H
+#define __STM32F0xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+   
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+  
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define FLASH_TIMEOUT_VALUE      (50000U) /* 50 s */
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Private_Macros
+  * @{
+  */
+
+#define IS_FLASH_TYPEPROGRAM(VALUE)  (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_WORD)     || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))  
+
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+                                       ((__LATENCY__) == FLASH_LATENCY_1))
+
+/**
+  * @}
+  */  
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */  
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE              = 0U, 
+  FLASH_PROC_PAGEERASE         = 1U,
+  FLASH_PROC_MASSERASE         = 2U,
+  FLASH_PROC_PROGRAMHALFWORD   = 3U,
+  FLASH_PROC_PROGRAMWORD       = 4U,
+  FLASH_PROC_PROGRAMDOUBLEWORD = 5U
+} FLASH_ProcedureTypeDef;
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+  
+  __IO uint32_t               DataRemaining;    /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+  __IO uint32_t               Address;          /*!< Internal variable to save address selected for program or erase */
+
+  __IO uint64_t               Data;             /*!< Internal variable to save data to be programmed */
+
+  HAL_LockTypeDef             Lock;             /*!< FLASH locking object                */
+
+  __IO uint32_t               ErrorCode;        /*!< FLASH error code                    
+                                                     This parameter can be a value of @ref FLASH_Error_Codes  */
+} FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+
+/** @defgroup FLASH_Error_Codes FLASH Error Codes
+  * @{
+  */
+
+#define HAL_FLASH_ERROR_NONE      0x00U  /*!< No error */
+#define HAL_FLASH_ERROR_PROG      0x01U  /*!< Programming error */
+#define HAL_FLASH_ERROR_WRP       0x02U  /*!< Write protection error */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define FLASH_TYPEPROGRAM_HALFWORD   (0x01U)  /*!ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  */ 
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ *  @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */   
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval None
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()    (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval None
+  */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Interrupt FLASH Interrupts
+ *  @brief macros to handle FLASH interrupts
+ * @{
+ */ 
+
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+  *     @arg @ref FLASH_IT_ERR Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  SET_BIT((FLASH->CR), (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+  *     @arg @ref FLASH_IT_ERR Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__ specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref FLASH_FLAG_BSY         FLASH Busy flag
+  *            @arg @ref FLASH_FLAG_EOP         FLASH End of Operation flag 
+  *            @arg @ref FLASH_FLAG_WRPERR      FLASH Write protected error flag 
+  *            @arg @ref FLASH_FLAG_PGERR       FLASH Programming error flag
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   (((FLASH->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__ specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref FLASH_FLAG_EOP         FLASH End of Operation flag 
+  *            @arg @ref FLASH_FLAG_WRPERR      FLASH Write protected error flag 
+  *            @arg @ref FLASH_FLAG_PGERR       FLASH Programming error flag
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   ((FLASH->SR) = (__FLAG__))
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Include FLASH HAL Extended module */
+#include "stm32f0xx_hal_flash_ex.h"  
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler function */
+void       HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */ 
+void       HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void       HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef       FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h
new file mode 100644
index 0000000..a4c79d8
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h
@@ -0,0 +1,448 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_flash_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of Flash HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_EX_H
+#define __STM32F0xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASHEx
+  * @{
+  */ 
+
+/** @addtogroup FLASHEx_Private_Macros
+  * @{
+  */
+#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \
+                             ((VALUE) == FLASH_TYPEERASE_MASSERASE))  
+
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \
+                            ((VALUE) == OB_WRPSTATE_ENABLE))  
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) 
+
+#define IS_OB_RDP_LEVEL(LEVEL)     (((LEVEL) == OB_RDP_LEVEL_0)   ||\
+                                    ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+                                    ((LEVEL) == OB_RDP_LEVEL_2))*/
+
+#define IS_OB_IWDG_SOURCE(SOURCE)  (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE)  (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_BOOT1(BOOT1)         (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+
+#define IS_OB_VDDA_ANALOG(ANALOG)  (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+
+#define IS_OB_SRAM_PARITY(PARITY)  (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
+
+#if defined(FLASH_OBR_BOOT_SEL)
+#define IS_OB_BOOT_SEL(BOOT_SEL)   (((BOOT_SEL) == OB_BOOT_SEL_RESET) || ((BOOT_SEL) == OB_BOOT_SEL_SET))
+#define IS_OB_BOOT0(BOOT0)         (((BOOT0) == OB_BOOT0_RESET) || ((BOOT0) == OB_BOOT0_SET))
+#endif /* FLASH_OBR_BOOT_SEL */
+
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
+
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= FLASH_BANK1_END)
+
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_BANK1_END))
+
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
+  * @{
+  */
+/**
+  * @brief  FLASH Erase structure definition
+  */
+typedef struct
+{
+  uint32_t TypeErase;   /*!< TypeErase: Mass erase or page erase.
+                             This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+  uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+                             This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_BANK1_END */
+  
+  uint32_t NbPages;     /*!< NbPages: Number of pagess to be erased.
+                             This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
+                                                          
+} FLASH_EraseInitTypeDef;
+
+/**
+  * @brief  FLASH Options bytes program structure definition
+  */
+typedef struct
+{
+  uint32_t OptionType;  /*!< OptionType: Option byte to be configured.
+                             This parameter can be a value of @ref FLASHEx_OB_Type */
+
+  uint32_t WRPState;    /*!< WRPState: Write protection activation or deactivation.
+                             This parameter can be a value of @ref FLASHEx_OB_WRP_State */
+
+  uint32_t WRPPage;     /*!< WRPPage: specifies the page(s) to be write protected
+                             This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+  uint8_t RDPLevel;     /*!< RDPLevel: Set the read protection level..
+                             This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
+
+  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
+                             IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY
+                             This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
+                             @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1, @ref FLASHEx_OB_VDDA_Analog_Monitoring and
+                             @ref FLASHEx_OB_RAM_Parity_Check_Enable */
+
+  uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
+                             This parameter can be a value of @ref FLASHEx_OB_Data_Address */
+  
+  uint8_t DATAData;     /*!< DATAData: Data to be stored in the option byte DATA
+                             This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */  
+} FLASH_OBProgramInitTypeDef;
+/**
+  * @}
+  */  
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+  * @{
+  */
+
+/** @defgroup FLASHEx_Page_Size FLASHEx Page Size
+  * @{
+  */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) \
+ || defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define FLASH_PAGE_SIZE          0x400U
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) \
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define FLASH_PAGE_SIZE          0x800U
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+  * @{
+  */ 
+#define FLASH_TYPEERASE_PAGES     (0x00U)  /*!
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_H
+#define __STM32F0xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+/** 
+  * @brief   GPIO Init structure definition  
+  */
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed */
+
+  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins 
+                            This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/** 
+  * @brief  GPIO Bit SET and Bit RESET enumeration 
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0U,
+  GPIO_PIN_SET
+}GPIO_PinState;
+/**
+  * @}
+  */
+  
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+/** @defgroup GPIO_pins GPIO pins
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001U)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002U)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004U)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008U)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010U)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020U)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040U)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080U)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100U)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200U)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400U)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800U)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000U)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000U)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000U)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000U)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFFU)  /* All pins selected */
+
+#define GPIO_PIN_MASK              (0x0000FFFFU) /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode GPIO mode
+  * @brief GPIO Configuration Mode 
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection 
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */ 
+#define  GPIO_MODE_INPUT                        (0x00000000U)   /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    (0x00000001U)   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    (0x00000011U)   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        (0x00000002U)   /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        (0x00000012U)   /*!< Alternate Function Open Drain Mode    */
+#define  GPIO_MODE_ANALOG                       (0x00000003U)   /*!< Analog Mode  */  
+#define  GPIO_MODE_IT_RISING                    (0x10110000U)   /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   (0x10210000U)   /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            (0x10310000U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+#define  GPIO_MODE_EVT_RISING                   (0x10120000U)   /*!< External Event Mode with Rising edge trigger detection               */
+#define  GPIO_MODE_EVT_FALLING                  (0x10220000U)   /*!< External Event Mode with Falling edge trigger detection              */
+#define  GPIO_MODE_EVT_RISING_FALLING           (0x10320000U)   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+/**
+  * @}
+  */
+                                                         
+/** @defgroup GPIO_speed GPIO speed
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */  
+#define  GPIO_SPEED_FREQ_LOW      (0x00000000U)  /*!< range up to 2 MHz, please refer to the product datasheet */
+#define  GPIO_SPEED_FREQ_MEDIUM   (0x00000001U)  /*!< range  4 MHz to 10 MHz, please refer to the product datasheet */
+#define  GPIO_SPEED_FREQ_HIGH     (0x00000003U)  /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */
+/**
+  * @}
+  */
+
+ /** @defgroup GPIO_pull GPIO pull
+   * @brief GPIO Pull-Up or Pull-Down Activation
+   * @{
+   */  
+#define  GPIO_NOPULL        (0x00000000U)   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        (0x00000001U)   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      (0x00000002U)   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+  
+/**
+  * @brief  Check whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__ specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clear the EXTI's line pending flags.
+  * @param  __EXTI_LINE__ specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Check whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__ specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clear the EXTI's line pending bits.
+  * @param  __EXTI_LINE__ specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Generate a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__ specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION)  (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+#define IS_GPIO_PIN(__PIN__)        (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
+                                     ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
+
+#define IS_GPIO_MODE(__MODE__)      (((__MODE__) == GPIO_MODE_INPUT)              ||\
+                                     ((__MODE__) == GPIO_MODE_OUTPUT_PP)          ||\
+                                     ((__MODE__) == GPIO_MODE_OUTPUT_OD)          ||\
+                                     ((__MODE__) == GPIO_MODE_AF_PP)              ||\
+                                     ((__MODE__) == GPIO_MODE_AF_OD)              ||\
+                                     ((__MODE__) == GPIO_MODE_IT_RISING)          ||\
+                                     ((__MODE__) == GPIO_MODE_IT_FALLING)         ||\
+                                     ((__MODE__) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                                     ((__MODE__) == GPIO_MODE_EVT_RISING)         ||\
+                                     ((__MODE__) == GPIO_MODE_EVT_FALLING)        ||\
+                                     ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                                     ((__MODE__) == GPIO_MODE_ANALOG))
+
+#define IS_GPIO_SPEED(__SPEED__)    (((__SPEED__) == GPIO_SPEED_FREQ_LOW)    ||\
+                                     ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
+                                     ((__SPEED__) == GPIO_SPEED_FREQ_HIGH))
+
+#define IS_GPIO_PULL(__PULL__)      (((__PULL__) == GPIO_NOPULL)   ||\
+                                     ((__PULL__) == GPIO_PULLUP)   || \
+                                     ((__PULL__) == GPIO_PULLDOWN))
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extended module */
+#include "stm32f0xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/ 
+/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions 
+ *  @brief    Initialization and Configuration functions
+ * @{
+ */
+     
+/* Initialization and de-initialization functions *****************************/
+void              HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void              HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions 
+ * @{
+ */
+   
+/* IO operation functions *****************************************************/
+GPIO_PinState     HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void              HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void              HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void              HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void              HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */  
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h
new file mode 100644
index 0000000..33b27e3
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h
@@ -0,0 +1,800 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_gpio_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_EX_H
+#define __STM32F0xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIOEx GPIOEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+  * @{
+  */ 
+  
+/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection
+  * @{
+  */
+  
+#if defined (STM32F030x6)
+/*------------------------- STM32F030x6---------------------------*/ 
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1 Alternate Function mapping      */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_TIM3         ((uint8_t)0x00U)  /*!< AF0: TIM3 Alternate Function mapping      */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_I2C1         ((uint8_t)0x04U)  /*!< AF4: I2C1 Alternate Function mapping      */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F030x6 */
+
+/*---------------------------------- STM32F030x8 -------------------------------------------*/
+#if defined (STM32F030x8)
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1 Alternate Function mapping      */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2 Alternate Function mapping      */
+#define GPIO_AF0_TIM15        ((uint8_t)0x00U)  /*!< AF0: TIM15 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_TIM3         ((uint8_t)0x00U)  /*!< AF0: TIM3 Alternate Function mapping      */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_TIM15        ((uint8_t)0x01U)  /*!< AF1: TIM15 Alternate Function mapping     */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_I2C2         ((uint8_t)0x01U)  /*!< AF1: I2C2 Alternate Function mapping      */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+#define GPIO_AF3_TIM15        ((uint8_t)0x03U)  /*!< AF3: TIM15 Alternate Function mapping     */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F030x8 */
+
+#if defined (STM32F031x6) || defined (STM32F038xx)
+/*--------------------------- STM32F031x6/STM32F038xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_SWDAT        ((uint8_t)0x00U)  /*!< AF0: SWDAT Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM2         ((uint8_t)0x02U)  /*!< AF2: TIM2 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_I2C1         ((uint8_t)0x04U)  /*!< AF4: I2C1 Alternate Function mapping      */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F031x6 || STM32F038xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+/*--------------------------- STM32F051x8/STM32F058xx---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2 Alternate Function mapping      */
+#define GPIO_AF0_TIM15        ((uint8_t)0x00U)  /*!< AF0: TIM15 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_CEC          ((uint8_t)0x00U)  /*!< AF0: CEC Alternate Function mapping       */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_TIM15        ((uint8_t)0x01U)  /*!< AF1: TIM15 Alternate Function mapping     */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_I2C2         ((uint8_t)0x01U)  /*!< AF1: I2C2 Alternate Function mapping      */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_CEC          ((uint8_t)0x01U)  /*!< AF1: CEC Alternate Function mapping       */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM2         ((uint8_t)0x02U)  /*!< AF2: TIM2 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+#define GPIO_AF3_TIM15        ((uint8_t)0x03U)  /*!< AF3: TIM15 Alternate Function mapping     */
+#define GPIO_AF3_TSC          ((uint8_t)0x03U)  /*!< AF3: TSC Alternate Function mapping       */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1        ((uint8_t)0x07U)  /*!< AF7: COMP1 Alternate Function mapping     */
+#define GPIO_AF7_COMP2        ((uint8_t)0x07U)  /*!< AF7: COMP2 Alternate Function mapping     */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F051x8/STM32F058xx */
+
+#if defined (STM32F071xB)
+/*--------------------------- STM32F071xB ---------------------------*/
+/* AF 0 */ 
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: AEVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_CEC          ((uint8_t)0x00U)  /*!< AF0: CEC Alternate Function mapping       */
+#define GPIO_AF0_CRS          ((uint8_t)0x00U)  /*!< AF0: CRS Alternate Function mapping       */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1         ((uint8_t)0x00U)  /*!< AF0: TIM1 Alternate Function mapping      */
+#define GPIO_AF0_TIM3         ((uint8_t)0x00U)  /*!< AF0: TIM3 Alternate Function mapping      */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_TIM15        ((uint8_t)0x00U)  /*!< AF0: TIM15 Alternate Function mapping     */
+#define GPIO_AF0_TIM16        ((uint8_t)0x00U)  /*!< AF0: TIM16 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_TSC          ((uint8_t)0x00U)  /*!< AF0: TSC Alternate Function mapping       */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_USART2       ((uint8_t)0x00U)  /*!< AF0: USART2 Alternate Function mapping    */
+#define GPIO_AF0_USART3       ((uint8_t)0x00U)  /*!< AF0: USART3 Alternate Function mapping    */
+#define GPIO_AF0_USART4       ((uint8_t)0x00U)  /*!< AF0: USART4 Alternate Function mapping    */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_TIM15        ((uint8_t)0x01U)  /*!< AF1: TIM15 Alternate Function mapping     */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_USART3       ((uint8_t)0x01U)  /*!< AF1: USART3 Alternate Function mapping    */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_CEC          ((uint8_t)0x01U)  /*!< AF1: CEC Alternate Function mapping       */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_I2C2         ((uint8_t)0x01U)  /*!< AF1: I2C2 Alternate Function mapping      */
+#define GPIO_AF1_TSC          ((uint8_t)0x01U)  /*!< AF1: TSC Alternate Function mapping       */
+#define GPIO_AF1_SPI1         ((uint8_t)0x01U)  /*!< AF1: SPI1 Alternate Function mapping      */
+#define GPIO_AF1_SPI2         ((uint8_t)0x01U)  /*!< AF1: SPI2 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM2         ((uint8_t)0x02U)  /*!< AF2: TIM2 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_TSC          ((uint8_t)0x03U)  /*!< AF3: TSC Alternate Function mapping       */
+#define GPIO_AF3_TIM15        ((uint8_t)0x03U)  /*!< AF3: TIM15 Alternate Function mapping     */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_USART4       ((uint8_t)0x04U)  /*!< AF4: USART4 Alternate Function mapping    */
+#define GPIO_AF4_USART3       ((uint8_t)0x04U)  /*!< AF4: USART3 Alternate Function mapping    */
+#define GPIO_AF4_CRS          ((uint8_t)0x04U)  /*!< AF4: CRS Alternate Function mapping       */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15        ((uint8_t)0x05U)  /*!< AF5: TIM15 Alternate Function mapping     */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+#define GPIO_AF5_SPI2         ((uint8_t)0x05U)  /*!< AF5: SPI2 Alternate Function mapping      */
+#define GPIO_AF5_I2C2         ((uint8_t)0x05U)  /*!< AF5: I2C2 Alternate Function mapping      */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1        ((uint8_t)0x07U)  /*!< AF7: COMP1 Alternate Function mapping     */
+#define GPIO_AF7_COMP2        ((uint8_t)0x07U)  /*!< AF7: COMP2 Alternate Function mapping     */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F071xB */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/*--------------------------- STM32F091xC || STM32F098xx ------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_CEC          ((uint8_t)0x00U)  /*!< AF0: CEC Alternate Function mapping       */
+#define GPIO_AF0_CRS          ((uint8_t)0x00U)  /*!< AF0: CRS Alternate Function mapping       */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1         ((uint8_t)0x00U)  /*!< AF0: TIM1 Alternate Function mapping      */
+#define GPIO_AF0_TIM3         ((uint8_t)0x00U)  /*!< AF0: TIM3 Alternate Function mapping      */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_TIM15        ((uint8_t)0x00U)  /*!< AF0: TIM15 Alternate Function mapping     */
+#define GPIO_AF0_TIM16        ((uint8_t)0x00U)  /*!< AF0: TIM16 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_TSC          ((uint8_t)0x00U)  /*!< AF0: TSC Alternate Function mapping       */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_USART2       ((uint8_t)0x00U)  /*!< AF0: USART2 Alternate Function mapping    */
+#define GPIO_AF0_USART3       ((uint8_t)0x00U)  /*!< AF0: USART3 Alternate Function mapping    */
+#define GPIO_AF0_USART4       ((uint8_t)0x00U)  /*!< AF0: USART4 Alternate Function mapping    */
+#define GPIO_AF0_USART8       ((uint8_t)0x00U)  /*!< AF0: USART8 Alternate Function mapping    */
+#define GPIO_AF0_CAN          ((uint8_t)0x00U)  /*!< AF0: CAN Alternate Function mapping       */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_TIM15        ((uint8_t)0x01U)  /*!< AF1: TIM15 Alternate Function mapping     */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_USART3       ((uint8_t)0x01U)  /*!< AF1: USART3 Alternate Function mapping    */
+#define GPIO_AF1_USART4       ((uint8_t)0x01U)  /*!< AF1: USART4 Alternate Function mapping    */
+#define GPIO_AF1_USART5       ((uint8_t)0x01U)  /*!< AF1: USART5 Alternate Function mapping    */
+#define GPIO_AF1_USART6       ((uint8_t)0x01U)  /*!< AF1: USART6 Alternate Function mapping    */
+#define GPIO_AF1_USART7       ((uint8_t)0x01U)  /*!< AF1: USART7 Alternate Function mapping    */
+#define GPIO_AF1_USART8       ((uint8_t)0x01U)  /*!< AF1: USART8 Alternate Function mapping    */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_CEC          ((uint8_t)0x01U)  /*!< AF1: CEC Alternate Function mapping       */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_I2C2         ((uint8_t)0x01U)  /*!< AF1: I2C2 Alternate Function mapping      */
+#define GPIO_AF1_TSC          ((uint8_t)0x01U)  /*!< AF1: TSC Alternate Function mapping       */
+#define GPIO_AF1_SPI1         ((uint8_t)0x01U)  /*!< AF1: SPI1 Alternate Function mapping      */
+#define GPIO_AF1_SPI2         ((uint8_t)0x01U)  /*!< AF1: SPI2 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM2         ((uint8_t)0x02U)  /*!< AF2: TIM2 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF2_USART5       ((uint8_t)0x02U)  /*!< AF2: USART5 Alternate Function mapping    */
+#define GPIO_AF2_USART6       ((uint8_t)0x02U)  /*!< AF2: USART6 Alternate Function mapping    */
+#define GPIO_AF2_USART7       ((uint8_t)0x02U)  /*!< AF2: USART7 Alternate Function mapping    */
+#define GPIO_AF2_USART8       ((uint8_t)0x02U)  /*!< AF2: USART8 Alternate Function mapping    */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_TSC          ((uint8_t)0x03U)  /*!< AF3: TSC Alternate Function mapping       */
+#define GPIO_AF3_TIM15        ((uint8_t)0x03U)  /*!< AF3: TIM15 Alternate Function mapping     */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_USART4       ((uint8_t)0x04U)  /*!< AF4: USART4 Alternate Function mapping    */
+#define GPIO_AF4_USART3       ((uint8_t)0x04U)  /*!< AF4: USART3 Alternate Function mapping    */
+#define GPIO_AF4_CRS          ((uint8_t)0x04U)  /*!< AF4: CRS Alternate Function mapping       */
+#define GPIO_AF4_CAN          ((uint8_t)0x04U)  /*!< AF4: CAN Alternate Function mapping       */
+#define GPIO_AF4_I2C1         ((uint8_t)0x04U)  /*!< AF4: I2C1 Alternate Function mapping      */
+#define GPIO_AF4_USART5       ((uint8_t)0x04U)  /*!< AF4: USART5 Alternate Function mapping    */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15        ((uint8_t)0x05U)  /*!< AF5: TIM15 Alternate Function mapping     */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+#define GPIO_AF5_SPI2         ((uint8_t)0x05U)  /*!< AF5: SPI2 Alternate Function mapping      */
+#define GPIO_AF5_I2C2         ((uint8_t)0x05U)  /*!< AF5: I2C2 Alternate Function mapping      */
+#define GPIO_AF5_MCO          ((uint8_t)0x05U)  /*!< AF5: MCO Alternate Function mapping       */
+#define GPIO_AF5_USART6       ((uint8_t)0x05U)  /*!< AF5: USART6 Alternate Function mapping    */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1        ((uint8_t)0x07U)  /*!< AF7: COMP1 Alternate Function mapping     */
+#define GPIO_AF7_COMP2        ((uint8_t)0x07U)  /*!< AF7: COMP2 Alternate Function mapping     */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F091xC  || STM32F098xx */
+
+#if defined(STM32F030xC)
+/*--------------------------- STM32F030xC ----------------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1 Alternate Function mapping      */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2 Alternate Function mapping      */
+#define GPIO_AF0_TIM3         ((uint8_t)0x00U)  /*!< AF0: TIM3 Alternate Function mapping      */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_TIM15        ((uint8_t)0x00U)  /*!< AF0: TIM15 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_USART4       ((uint8_t)0x00U)  /*!< AF0: USART4 Alternate Function mapping    */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_TIM15        ((uint8_t)0x01U)  /*!< AF1: TIM15 Alternate Function mapping     */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_USART3       ((uint8_t)0x01U)  /*!< AF1: USART3 Alternate Function mapping    */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_I2C2         ((uint8_t)0x01U)  /*!< AF1: I2C2 Alternate Function mapping      */
+#define GPIO_AF1_SPI2         ((uint8_t)0x01U)  /*!< AF1: SPI2 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF2_USART5       ((uint8_t)0x02U)  /*!< AF2: USART5 Alternate Function mapping    */
+#define GPIO_AF2_USART6       ((uint8_t)0x02U)  /*!< AF2: USART6 Alternate Function mapping    */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_TIM15        ((uint8_t)0x03U)  /*!< AF3: TIM15 Alternate Function mapping     */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_USART4       ((uint8_t)0x04U)  /*!< AF4: USART4 Alternate Function mapping    */
+#define GPIO_AF4_USART3       ((uint8_t)0x04U)  /*!< AF4: USART3 Alternate Function mapping    */
+#define GPIO_AF4_I2C1         ((uint8_t)0x04U)  /*!< AF4: I2C1 Alternate Function mapping      */
+#define GPIO_AF4_USART5       ((uint8_t)0x04U)  /*!< AF4: USART5 Alternate Function mapping    */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15        ((uint8_t)0x05U)  /*!< AF5: TIM15 Alternate Function mapping     */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+#define GPIO_AF5_SPI2         ((uint8_t)0x05U)  /*!< AF5: SPI2 Alternate Function mapping      */
+#define GPIO_AF5_I2C2         ((uint8_t)0x05U)  /*!< AF5: I2C2 Alternate Function mapping      */
+#define GPIO_AF5_MCO          ((uint8_t)0x05U)  /*!< AF5: MCO Alternate Function mapping       */
+#define GPIO_AF5_USART6       ((uint8_t)0x05U)  /*!< AF5: USART6 Alternate Function mapping    */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F030xC */
+
+#if defined (STM32F072xB) || defined (STM32F078xx)
+/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_CEC          ((uint8_t)0x00U)  /*!< AF0: CEC Alternate Function mapping       */
+#define GPIO_AF0_CRS          ((uint8_t)0x00U)  /*!< AF0: CRS Alternate Function mapping       */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1         ((uint8_t)0x00U)  /*!< AF0: TIM1 Alternate Function mapping      */
+#define GPIO_AF0_TIM3         ((uint8_t)0x00U)  /*!< AF0: TIM3 Alternate Function mapping      */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_TIM15        ((uint8_t)0x00U)  /*!< AF0: TIM15 Alternate Function mapping     */
+#define GPIO_AF0_TIM16        ((uint8_t)0x00U)  /*!< AF0: TIM16 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_TSC          ((uint8_t)0x00U)  /*!< AF0: TSC Alternate Function mapping       */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_USART2       ((uint8_t)0x00U)  /*!< AF0: USART2 Alternate Function mapping    */
+#define GPIO_AF0_USART3       ((uint8_t)0x00U)  /*!< AF0: USART2 Alternate Function mapping    */
+#define GPIO_AF0_USART4       ((uint8_t)0x00U)  /*!< AF0: USART4 Alternate Function mapping    */
+#define GPIO_AF0_CAN          ((uint8_t)0x00U)  /*!< AF0: CAN Alternate Function mapping       */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_TIM15        ((uint8_t)0x01U)  /*!< AF1: TIM15 Alternate Function mapping     */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_USART3       ((uint8_t)0x01U)  /*!< AF1: USART3 Alternate Function mapping    */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_CEC          ((uint8_t)0x01U)  /*!< AF1: CEC Alternate Function mapping       */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_I2C2         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_TSC          ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_SPI1         ((uint8_t)0x01U)  /*!< AF1: SPI1 Alternate Function mapping      */
+#define GPIO_AF1_SPI2         ((uint8_t)0x01U)  /*!< AF1: SPI2 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM2         ((uint8_t)0x02U)  /*!< AF2: TIM2 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF2_USB          ((uint8_t)0x02U)  /*!< AF2: USB Alternate Function mapping       */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_TSC          ((uint8_t)0x03U)  /*!< AF3: TSC Alternate Function mapping       */
+#define GPIO_AF3_TIM15        ((uint8_t)0x03U)  /*!< AF3: TIM15 Alternate Function mapping     */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_USART4       ((uint8_t)0x04U)  /*!< AF4: USART4 Alternate Function mapping    */
+#define GPIO_AF4_USART3       ((uint8_t)0x04U)  /*!< AF4: USART3 Alternate Function mapping    */
+#define GPIO_AF4_CRS          ((uint8_t)0x04U)  /*!< AF4: CRS Alternate Function mapping       */
+#define GPIO_AF4_CAN          ((uint8_t)0x04U)  /*!< AF4: CAN Alternate Function mapping       */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15        ((uint8_t)0x05U)  /*!< AF5: TIM15 Alternate Function mapping     */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+#define GPIO_AF5_SPI2         ((uint8_t)0x05U)  /*!< AF5: SPI2 Alternate Function mapping      */
+#define GPIO_AF5_I2C2         ((uint8_t)0x05U)  /*!< AF5: I2C2 Alternate Function mapping      */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1        ((uint8_t)0x07U)  /*!< AF7: COMP1 Alternate Function mapping     */
+#define GPIO_AF7_COMP2        ((uint8_t)0x07U)  /*!< AF7: COMP2 Alternate Function mapping     */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined (STM32F070xB)
+/*---------------------------------- STM32F070xB ---------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1 Alternate Function mapping      */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2 Alternate Function mapping      */
+#define GPIO_AF0_TIM3         ((uint8_t)0x00U)  /*!< AF0: TIM3 Alternate Function mapping      */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_TIM15        ((uint8_t)0x00U)  /*!< AF0: TIM15 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+#define GPIO_AF0_USART4       ((uint8_t)0x00U)  /*!< AF0: USART4 Alternate Function mapping    */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+#define GPIO_AF1_TIM15        ((uint8_t)0x01U)  /*!< AF1: TIM15 Alternate Function mapping     */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_USART3       ((uint8_t)0x01U)  /*!< AF1: USART4 Alternate Function mapping    */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_I2C2         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_SPI2         ((uint8_t)0x01U)  /*!< AF1: SPI2 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF2_USB          ((uint8_t)0x02U)  /*!< AF2: USB Alternate Function mapping       */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+#define GPIO_AF3_TIM15        ((uint8_t)0x03U)  /*!< AF3: TIM15 Alternate Function mapping     */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_USART4       ((uint8_t)0x04U)  /*!< AF4: USART4 Alternate Function mapping    */
+#define GPIO_AF4_USART3       ((uint8_t)0x04U)  /*!< AF4: USART3 Alternate Function mapping    */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15        ((uint8_t)0x05U)  /*!< AF5: TIM15 Alternate Function mapping     */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+#define GPIO_AF5_SPI2         ((uint8_t)0x05U)  /*!< AF5: SPI2 Alternate Function mapping      */
+#define GPIO_AF5_I2C2         ((uint8_t)0x05U)  /*!< AF5: I2C2 Alternate Function mapping      */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x06U)
+   
+#endif /* STM32F070xB */
+
+#if defined (STM32F042x6) || defined (STM32F048xx)
+/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_CEC          ((uint8_t)0x00U)  /*!< AF0: CEC Alternate Function mapping       */
+#define GPIO_AF0_CRS          ((uint8_t)0x00U)  /*!< AF0: CRS Alternate Function mapping       */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2         ((uint8_t)0x00U)  /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+
+/* AF 1 */
+#define GPIO_AF1_CEC          ((uint8_t)0x01U)  /*!< AF1: CEC Alternate Function mapping       */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM2         ((uint8_t)0x02U)  /*!< AF2: TIM2 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_USB          ((uint8_t)0x02U)  /*!< AF2: USB Alternate Function mapping       */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+#define GPIO_AF3_TSC          ((uint8_t)0x03U)  /*!< AF3: TSC Alternate Function mapping       */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_CAN          ((uint8_t)0x04U)  /*!< AF4: CAN Alternate Function mapping       */
+#define GPIO_AF4_CRS          ((uint8_t)0x04U)  /*!< AF4: CRS Alternate Function mapping       */
+#define GPIO_AF4_I2C1         ((uint8_t)0x04U)  /*!< AF4: I2C1 Alternate Function mapping      */
+
+/* AF 5 */ 
+#define GPIO_AF5_MCO          ((uint8_t)0x05U)  /*!< AF5: MCO Alternate Function mapping       */
+#define GPIO_AF5_I2C1         ((uint8_t)0x05U)  /*!< AF5: I2C1 Alternate Function mapping      */
+#define GPIO_AF5_I2C2         ((uint8_t)0x05U)  /*!< AF5: I2C2 Alternate Function mapping      */
+#define GPIO_AF5_SPI2         ((uint8_t)0x05U)  /*!< AF5: SPI2 Alternate Function mapping      */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+#define GPIO_AF5_USB          ((uint8_t)0x05U)  /*!< AF5: USB Alternate Function mapping       */
+
+/* AF 6 */ 
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined (STM32F070x6)
+/*--------------------------------------- STM32F070x6 ----------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT     ((uint8_t)0x00U)  /*!< AF0: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF0_IR           ((uint8_t)0x00U)  /*!< AF0: IR Alternate Function mapping        */
+#define GPIO_AF0_MCO          ((uint8_t)0x00U)  /*!< AF0: MCO Alternate Function mapping       */
+#define GPIO_AF0_SPI1         ((uint8_t)0x00U)  /*!< AF0: SPI1 Alternate Function mapping      */
+#define GPIO_AF0_SWDIO        ((uint8_t)0x00U)  /*!< AF0: SWDIO Alternate Function mapping     */
+#define GPIO_AF0_SWCLK        ((uint8_t)0x00U)  /*!< AF0: SWCLK Alternate Function mapping     */
+#define GPIO_AF0_TIM14        ((uint8_t)0x00U)  /*!< AF0: TIM14 Alternate Function mapping     */
+#define GPIO_AF0_TIM17        ((uint8_t)0x00U)  /*!< AF0: TIM17 Alternate Function mapping     */
+#define GPIO_AF0_USART1       ((uint8_t)0x00U)  /*!< AF0: USART1 Alternate Function mapping    */
+
+/* AF 1 */
+#define GPIO_AF1_EVENTOUT     ((uint8_t)0x01U)  /*!< AF1: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF1_I2C1         ((uint8_t)0x01U)  /*!< AF1: I2C1 Alternate Function mapping      */
+#define GPIO_AF1_IR           ((uint8_t)0x01U)  /*!< AF1: IR Alternate Function mapping        */
+#define GPIO_AF1_USART1       ((uint8_t)0x01U)  /*!< AF1: USART1 Alternate Function mapping    */
+#define GPIO_AF1_USART2       ((uint8_t)0x01U)  /*!< AF1: USART2 Alternate Function mapping    */
+#define GPIO_AF1_TIM3         ((uint8_t)0x01U)  /*!< AF1: TIM3 Alternate Function mapping      */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT     ((uint8_t)0x02U)  /*!< AF2: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF2_TIM1         ((uint8_t)0x02U)  /*!< AF2: TIM1 Alternate Function mapping      */
+#define GPIO_AF2_TIM16        ((uint8_t)0x02U)  /*!< AF2: TIM16 Alternate Function mapping     */
+#define GPIO_AF2_TIM17        ((uint8_t)0x02U)  /*!< AF2: TIM17 Alternate Function mapping     */
+#define GPIO_AF2_USB          ((uint8_t)0x02U)  /*!< AF2: USB Alternate Function mapping       */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT     ((uint8_t)0x03U)  /*!< AF3: EVENTOUT Alternate Function mapping  */
+#define GPIO_AF3_I2C1         ((uint8_t)0x03U)  /*!< AF3: I2C1 Alternate Function mapping      */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14        ((uint8_t)0x04U)  /*!< AF4: TIM14 Alternate Function mapping     */
+#define GPIO_AF4_I2C1         ((uint8_t)0x04U)  /*!< AF4: I2C1 Alternate Function mapping      */
+
+/* AF 5 */ 
+#define GPIO_AF5_MCO          ((uint8_t)0x05U)  /*!< AF5: MCO Alternate Function mapping       */
+#define GPIO_AF5_I2C1         ((uint8_t)0x05U)  /*!< AF5: I2C1 Alternate Function mapping      */
+#define GPIO_AF5_TIM16        ((uint8_t)0x05U)  /*!< AF5: TIM16 Alternate Function mapping     */
+#define GPIO_AF5_TIM17        ((uint8_t)0x05U)  /*!< AF5: TIM17 Alternate Function mapping     */
+#define GPIO_AF5_USB          ((uint8_t)0x05U)  /*!< AF5: USB Alternate Function mapping       */
+
+/* AF 6 */ 
+#define GPIO_AF6_EVENTOUT     ((uint8_t)0x06U)  /*!< AF6: EVENTOUT Alternate Function mapping  */
+
+#define IS_GPIO_AF(AF)        ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F070x6 */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros
+  * @{
+  */
+
+/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index
+* @{
+  */
+#if defined(GPIOD) && defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__)    (((__GPIOx__) == (GPIOA))? 0U :\
+                                      ((__GPIOx__) == (GPIOB))? 1U :\
+                                      ((__GPIOx__) == (GPIOC))? 2U :\
+                                      ((__GPIOx__) == (GPIOD))? 3U :\
+                                      ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif
+
+#if defined(GPIOD) && !defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__)    (((__GPIOx__) == (GPIOA))? 0U :\
+                                      ((__GPIOx__) == (GPIOB))? 1U :\
+                                      ((__GPIOx__) == (GPIOC))? 2U :\
+                                      ((__GPIOx__) == (GPIOD))? 3U : 5U)
+#endif
+
+#if !defined(GPIOD) && defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__)    (((__GPIOx__) == (GPIOA))? 0U :\
+                                      ((__GPIOx__) == (GPIOB))? 1U :\
+                                      ((__GPIOx__) == (GPIOC))? 2U :\
+                                      ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif
+
+#if !defined(GPIOD) && !defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__)    (((__GPIOx__) == (GPIOA))? 0U :\
+                                      ((__GPIOx__) == (GPIOB))? 1U :\
+                                      ((__GPIOx__) == (GPIOC))? 2U : 5U)
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/ 
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
new file mode 100644
index 0000000..3df3fc0
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
@@ -0,0 +1,809 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_i2c.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2C HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_I2C_H
+#define STM32F0xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2C
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+  * @{
+  */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+  * @brief  I2C Configuration Structure definition
+  * @{
+  */
+typedef struct
+{
+  uint32_t Timing;              /*!< Specifies the I2C_TIMINGR_register value.
+                                  This parameter calculated by referring to I2C initialization
+                                         section in Reference manual */
+
+  uint32_t OwnAddress1;         /*!< Specifies the first device own address.
+                                  This parameter can be a 7-bit or 10-bit address. */
+
+  uint32_t AddressingMode;      /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+
+  uint32_t DualAddressMode;     /*!< Specifies if dual addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+
+  uint32_t OwnAddress2;         /*!< Specifies the second device own address if dual addressing mode is selected
+                                  This parameter can be a 7-bit address. */
+
+  uint32_t OwnAddress2Masks;    /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+                                  This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+
+  uint32_t GeneralCallMode;     /*!< Specifies if general call mode is selected.
+                                  This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+
+  uint32_t NoStretchMode;       /*!< Specifies if nostretch mode is selected.
+                                  This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+
+} I2C_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+  * @brief  HAL State structure definition
+  * @note  HAL I2C State value coding follow below described bitmap :\n
+  *          b7-b6  Error information\n
+  *             00 : No Error\n
+  *             01 : Abort (Abort user request on going)\n
+  *             10 : Timeout\n
+  *             11 : Error\n
+  *          b5     Peripheral initialization status\n
+  *             0  : Reset (peripheral not initialized)\n
+  *             1  : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
+  *          b4     (not used)\n
+  *             x  : Should be set to 0\n
+  *          b3\n
+  *             0  : Ready or Busy (No Listen mode ongoing)\n
+  *             1  : Listen (peripheral in Address Listen Mode)\n
+  *          b2     Intrinsic process state\n
+  *             0  : Ready\n
+  *             1  : Busy (peripheral busy with some configuration or internal operations)\n
+  *          b1     Rx state\n
+  *             0  : Ready (no Rx operation ongoing)\n
+  *             1  : Busy (Rx operation ongoing)\n
+  *          b0     Tx state\n
+  *             0  : Ready (no Tx operation ongoing)\n
+  *             1  : Busy (Tx operation ongoing)
+  * @{
+  */
+typedef enum
+{
+  HAL_I2C_STATE_RESET             = 0x00U,   /*!< Peripheral is not yet Initialized         */
+  HAL_I2C_STATE_READY             = 0x20U,   /*!< Peripheral Initialized and ready for use  */
+  HAL_I2C_STATE_BUSY              = 0x24U,   /*!< An internal process is ongoing            */
+  HAL_I2C_STATE_BUSY_TX           = 0x21U,   /*!< Data Transmission process is ongoing      */
+  HAL_I2C_STATE_BUSY_RX           = 0x22U,   /*!< Data Reception process is ongoing         */
+  HAL_I2C_STATE_LISTEN            = 0x28U,   /*!< Address Listen Mode is ongoing            */
+  HAL_I2C_STATE_BUSY_TX_LISTEN    = 0x29U,   /*!< Address Listen Mode and Data Transmission
+                                                 process is ongoing                         */
+  HAL_I2C_STATE_BUSY_RX_LISTEN    = 0x2AU,   /*!< Address Listen Mode and Data Reception
+                                                 process is ongoing                         */
+  HAL_I2C_STATE_ABORT             = 0x60U,   /*!< Abort user request ongoing                */
+  HAL_I2C_STATE_TIMEOUT           = 0xA0U,   /*!< Timeout state                             */
+  HAL_I2C_STATE_ERROR             = 0xE0U    /*!< Error                                     */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+  * @brief  HAL Mode structure definition
+  * @note  HAL I2C Mode value coding follow below described bitmap :\n
+  *          b7     (not used)\n
+  *             x  : Should be set to 0\n
+  *          b6\n
+  *             0  : None\n
+  *             1  : Memory (HAL I2C communication is in Memory Mode)\n
+  *          b5\n
+  *             0  : None\n
+  *             1  : Slave (HAL I2C communication is in Slave Mode)\n
+  *          b4\n
+  *             0  : None\n
+  *             1  : Master (HAL I2C communication is in Master Mode)\n
+  *          b3-b2-b1-b0  (not used)\n
+  *             xxxx : Should be set to 0000
+  * @{
+  */
+typedef enum
+{
+  HAL_I2C_MODE_NONE               = 0x00U,   /*!< No I2C communication on going             */
+  HAL_I2C_MODE_MASTER             = 0x10U,   /*!< I2C communication is in Master Mode       */
+  HAL_I2C_MODE_SLAVE              = 0x20U,   /*!< I2C communication is in Slave Mode        */
+  HAL_I2C_MODE_MEM                = 0x40U    /*!< I2C communication is in Memory Mode       */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+  * @brief  I2C Error Code definition
+  * @{
+  */
+#define HAL_I2C_ERROR_NONE      (0x00000000U)    /*!< No error              */
+#define HAL_I2C_ERROR_BERR      (0x00000001U)    /*!< BERR error            */
+#define HAL_I2C_ERROR_ARLO      (0x00000002U)    /*!< ARLO error            */
+#define HAL_I2C_ERROR_AF        (0x00000004U)    /*!< ACKF error            */
+#define HAL_I2C_ERROR_OVR       (0x00000008U)    /*!< OVR error             */
+#define HAL_I2C_ERROR_DMA       (0x00000010U)    /*!< DMA transfer error    */
+#define HAL_I2C_ERROR_TIMEOUT   (0x00000020U)    /*!< Timeout error         */
+#define HAL_I2C_ERROR_SIZE      (0x00000040U)    /*!< Size Management error */
+#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U)    /*!< DMA Parameter Error   */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define HAL_I2C_ERROR_INVALID_CALLBACK  (0x00000100U)    /*!< Invalid Callback error */
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+#define HAL_I2C_ERROR_INVALID_PARAM     (0x00000200U)    /*!< Invalid Parameters error  */
+/**
+  * @}
+  */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+  * @brief  I2C handle Structure definition
+  * @{
+  */
+typedef struct __I2C_HandleTypeDef
+{
+  I2C_TypeDef                *Instance;      /*!< I2C registers base address                */
+
+  I2C_InitTypeDef            Init;           /*!< I2C communication parameters              */
+
+  uint8_t                    *pBuffPtr;      /*!< Pointer to I2C transfer buffer            */
+
+  uint16_t                   XferSize;       /*!< I2C transfer size                         */
+
+  __IO uint16_t              XferCount;      /*!< I2C transfer counter                      */
+
+  __IO uint32_t              XferOptions;    /*!< I2C sequantial transfer options, this parameter can
+                                                  be a value of @ref I2C_XFEROPTIONS */
+
+  __IO uint32_t              PreviousState;  /*!< I2C communication Previous state          */
+
+  HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);  /*!< I2C transfer IRQ handler function pointer */
+
+  DMA_HandleTypeDef          *hdmatx;        /*!< I2C Tx DMA handle parameters              */
+
+  DMA_HandleTypeDef          *hdmarx;        /*!< I2C Rx DMA handle parameters              */
+
+  HAL_LockTypeDef            Lock;           /*!< I2C locking object                        */
+
+  __IO HAL_I2C_StateTypeDef  State;          /*!< I2C communication state                   */
+
+  __IO HAL_I2C_ModeTypeDef   Mode;           /*!< I2C communication mode                    */
+
+  __IO uint32_t              ErrorCode;      /*!< I2C Error code                            */
+
+  __IO uint32_t              AddrEventCount; /*!< I2C Address Event counter                 */
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+  void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Tx Transfer completed callback */
+  void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Rx Transfer completed callback */
+  void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Tx Transfer completed callback  */
+  void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Rx Transfer completed callback  */
+  void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);             /*!< I2C Listen Complete callback              */
+  void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Tx Transfer completed callback */
+  void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Rx Transfer completed callback */
+  void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);                  /*!< I2C Error callback                        */
+  void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Abort callback                        */
+
+  void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< I2C Slave Address Match callback */
+
+  void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);                /*!< I2C Msp Init callback                     */
+  void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Msp DeInit callback                   */
+
+#endif  /* USE_HAL_I2C_REGISTER_CALLBACKS */
+} I2C_HandleTypeDef;
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL I2C Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_I2C_MASTER_TX_COMPLETE_CB_ID      = 0x00U,    /*!< I2C Master Tx Transfer completed callback ID  */
+  HAL_I2C_MASTER_RX_COMPLETE_CB_ID      = 0x01U,    /*!< I2C Master Rx Transfer completed callback ID  */
+  HAL_I2C_SLAVE_TX_COMPLETE_CB_ID       = 0x02U,    /*!< I2C Slave Tx Transfer completed callback ID   */
+  HAL_I2C_SLAVE_RX_COMPLETE_CB_ID       = 0x03U,    /*!< I2C Slave Rx Transfer completed callback ID   */
+  HAL_I2C_LISTEN_COMPLETE_CB_ID         = 0x04U,    /*!< I2C Listen Complete callback ID               */
+  HAL_I2C_MEM_TX_COMPLETE_CB_ID         = 0x05U,    /*!< I2C Memory Tx Transfer callback ID            */
+  HAL_I2C_MEM_RX_COMPLETE_CB_ID         = 0x06U,    /*!< I2C Memory Rx Transfer completed callback ID  */
+  HAL_I2C_ERROR_CB_ID                   = 0x07U,    /*!< I2C Error callback ID                         */
+  HAL_I2C_ABORT_CB_ID                   = 0x08U,    /*!< I2C Abort callback ID                         */
+
+  HAL_I2C_MSPINIT_CB_ID                 = 0x09U,    /*!< I2C Msp Init callback ID                      */
+  HAL_I2C_MSPDEINIT_CB_ID               = 0x0AU     /*!< I2C Msp DeInit callback ID                    */
+
+} HAL_I2C_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL I2C Callback pointer definition
+  */
+typedef  void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
+typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
+
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+  * @{
+  */
+
+/** @defgroup I2C_XFEROPTIONS  I2C Sequential Transfer Options
+  * @{
+  */
+#define I2C_FIRST_FRAME                 ((uint32_t)I2C_SOFTEND_MODE)
+#define I2C_FIRST_AND_NEXT_FRAME        ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_NEXT_FRAME                  ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_FIRST_AND_LAST_FRAME        ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME                  ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME_NO_STOP          ((uint32_t)I2C_SOFTEND_MODE)
+
+/* List of XferOptions in usage of :
+ * 1- Restart condition in all use cases (direction change or not)
+ */
+#define  I2C_OTHER_FRAME                (0x000000AAU)
+#define  I2C_OTHER_AND_LAST_FRAME       (0x0000AA00U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
+  * @{
+  */
+#define I2C_ADDRESSINGMODE_7BIT         (0x00000001U)
+#define I2C_ADDRESSINGMODE_10BIT        (0x00000002U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLE         (0x00000000U)
+#define I2C_DUALADDRESS_ENABLE          I2C_OAR2_OA2EN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
+  * @{
+  */
+#define I2C_OA2_NOMASK                  ((uint8_t)0x00U)
+#define I2C_OA2_MASK01                  ((uint8_t)0x01U)
+#define I2C_OA2_MASK02                  ((uint8_t)0x02U)
+#define I2C_OA2_MASK03                  ((uint8_t)0x03U)
+#define I2C_OA2_MASK04                  ((uint8_t)0x04U)
+#define I2C_OA2_MASK05                  ((uint8_t)0x05U)
+#define I2C_OA2_MASK06                  ((uint8_t)0x06U)
+#define I2C_OA2_MASK07                  ((uint8_t)0x07U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
+  * @{
+  */
+#define I2C_GENERALCALL_DISABLE         (0x00000000U)
+#define I2C_GENERALCALL_ENABLE          I2C_CR1_GCEN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
+  * @{
+  */
+#define I2C_NOSTRETCH_DISABLE           (0x00000000U)
+#define I2C_NOSTRETCH_ENABLE            I2C_CR1_NOSTRETCH
+/**
+  * @}
+  */
+
+/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
+  * @{
+  */
+#define I2C_MEMADD_SIZE_8BIT            (0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT           (0x00000002U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
+  * @{
+  */
+#define I2C_DIRECTION_TRANSMIT          (0x00000000U)
+#define I2C_DIRECTION_RECEIVE           (0x00000001U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
+  * @{
+  */
+#define  I2C_RELOAD_MODE                I2C_CR2_RELOAD
+#define  I2C_AUTOEND_MODE               I2C_CR2_AUTOEND
+#define  I2C_SOFTEND_MODE               (0x00000000U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
+  * @{
+  */
+#define  I2C_NO_STARTSTOP               (0x00000000U)
+#define  I2C_GENERATE_STOP              (uint32_t)(0x80000000U | I2C_CR2_STOP)
+#define  I2C_GENERATE_START_READ        (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+#define  I2C_GENERATE_START_WRITE       (uint32_t)(0x80000000U | I2C_CR2_START)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+  * @brief I2C Interrupt definition
+  *        Elements values convention: 0xXXXXXXXX
+  *           - XXXXXXXX  : Interrupt control mask
+  * @{
+  */
+#define I2C_IT_ERRI                     I2C_CR1_ERRIE
+#define I2C_IT_TCI                      I2C_CR1_TCIE
+#define I2C_IT_STOPI                    I2C_CR1_STOPIE
+#define I2C_IT_NACKI                    I2C_CR1_NACKIE
+#define I2C_IT_ADDRI                    I2C_CR1_ADDRIE
+#define I2C_IT_RXI                      I2C_CR1_RXIE
+#define I2C_IT_TXI                      I2C_CR1_TXIE
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+  * @{
+  */
+#define I2C_FLAG_TXE                    I2C_ISR_TXE
+#define I2C_FLAG_TXIS                   I2C_ISR_TXIS
+#define I2C_FLAG_RXNE                   I2C_ISR_RXNE
+#define I2C_FLAG_ADDR                   I2C_ISR_ADDR
+#define I2C_FLAG_AF                     I2C_ISR_NACKF
+#define I2C_FLAG_STOPF                  I2C_ISR_STOPF
+#define I2C_FLAG_TC                     I2C_ISR_TC
+#define I2C_FLAG_TCR                    I2C_ISR_TCR
+#define I2C_FLAG_BERR                   I2C_ISR_BERR
+#define I2C_FLAG_ARLO                   I2C_ISR_ARLO
+#define I2C_FLAG_OVR                    I2C_ISR_OVR
+#define I2C_FLAG_PECERR                 I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT                I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT                  I2C_ISR_ALERT
+#define I2C_FLAG_BUSY                   I2C_ISR_BUSY
+#define I2C_FLAG_DIR                    I2C_ISR_DIR
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+  * @{
+  */
+
+/** @brief Reset I2C handle state.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                do{                                                   \
+                                                                    (__HANDLE__)->State = HAL_I2C_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+#endif
+
+/** @brief  Enable the specified I2C interrupt.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable.
+  *        This parameter can be one of the following values:
+  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable
+  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable
+  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable
+  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable
+  *            @arg @ref I2C_IT_RXI   RX interrupt enable
+  *            @arg @ref I2C_IT_TXI   TX interrupt enable
+  *
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)          ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief  Disable the specified I2C interrupt.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to disable.
+  *        This parameter can be one of the following values:
+  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable
+  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable
+  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable
+  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable
+  *            @arg @ref I2C_IT_RXI   RX interrupt enable
+  *            @arg @ref I2C_IT_TXI   TX interrupt enable
+  *
+  * @retval None
+  */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief  Check whether the specified I2C interrupt source is enabled or not.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the I2C interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable
+  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable
+  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable
+  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable
+  *            @arg @ref I2C_IT_RXI   RX interrupt enable
+  *            @arg @ref I2C_IT_TXI   TX interrupt enable
+  *
+  * @retval The new state of __INTERRUPT__ (SET or RESET).
+  */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)      ((((__HANDLE__)->Instance->CR1 & \
+                                                                   (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Check whether the specified I2C flag is set or not.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg @ref I2C_FLAG_TXE     Transmit data register empty
+  *            @arg @ref I2C_FLAG_TXIS    Transmit interrupt status
+  *            @arg @ref I2C_FLAG_RXNE    Receive data register not empty
+  *            @arg @ref I2C_FLAG_ADDR    Address matched (slave mode)
+  *            @arg @ref I2C_FLAG_AF      Acknowledge failure received flag
+  *            @arg @ref I2C_FLAG_STOPF   STOP detection flag
+  *            @arg @ref I2C_FLAG_TC      Transfer complete (master mode)
+  *            @arg @ref I2C_FLAG_TCR     Transfer complete reload
+  *            @arg @ref I2C_FLAG_BERR    Bus error
+  *            @arg @ref I2C_FLAG_ARLO    Arbitration lost
+  *            @arg @ref I2C_FLAG_OVR     Overrun/Underrun
+  *            @arg @ref I2C_FLAG_PECERR  PEC error in reception
+  *            @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+  *            @arg @ref I2C_FLAG_ALERT   SMBus alert
+  *            @arg @ref I2C_FLAG_BUSY    Bus busy
+  *            @arg @ref I2C_FLAG_DIR     Transfer direction (slave mode)
+  *
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define I2C_FLAG_MASK  (0x0001FFFFU)
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \
+                                                    (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief  Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref I2C_FLAG_TXE     Transmit data register empty
+  *            @arg @ref I2C_FLAG_ADDR    Address matched (slave mode)
+  *            @arg @ref I2C_FLAG_AF      Acknowledge failure received flag
+  *            @arg @ref I2C_FLAG_STOPF   STOP detection flag
+  *            @arg @ref I2C_FLAG_BERR    Bus error
+  *            @arg @ref I2C_FLAG_ARLO    Arbitration lost
+  *            @arg @ref I2C_FLAG_OVR     Overrun/Underrun
+  *            @arg @ref I2C_FLAG_PECERR  PEC error in reception
+  *            @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+  *            @arg @ref I2C_FLAG_ALERT   SMBus alert
+  *
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+                                                    : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief  Enable the specified I2C peripheral.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE(__HANDLE__)                            (SET_BIT((__HANDLE__)->Instance->CR1,  I2C_CR1_PE))
+
+/** @brief  Disable the specified I2C peripheral.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_DISABLE(__HANDLE__)                           (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief  Generate a Non-Acknowledge I2C peripheral in Slave mode.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__)                     (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+/**
+  * @}
+  */
+
+/* Include I2C HAL Extended module */
+#include "stm32f0xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
+                                           pI2C_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* IO operation functions  ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
+                                          uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
+                                         uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                    uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                   uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials,
+                                        uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                             uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                            uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                       uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                      uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                 uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                                uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                               uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                              uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                             uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                        uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                       uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                  uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                 uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                                 uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                                uint32_t XferOptions);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+  * @{
+  */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+  * @{
+  */
+/* Peripheral State, Mode and Error functions  *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef  HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t             HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+  * @{
+  */
+
+#define IS_I2C_ADDRESSING_MODE(MODE)    (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+                                         ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS)    (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+                                         ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK)  (((MASK) == I2C_OA2_NOMASK)  || \
+                                         ((MASK) == I2C_OA2_MASK01) || \
+                                         ((MASK) == I2C_OA2_MASK02) || \
+                                         ((MASK) == I2C_OA2_MASK03) || \
+                                         ((MASK) == I2C_OA2_MASK04) || \
+                                         ((MASK) == I2C_OA2_MASK05) || \
+                                         ((MASK) == I2C_OA2_MASK06) || \
+                                         ((MASK) == I2C_OA2_MASK07))
+
+#define IS_I2C_GENERAL_CALL(CALL)       (((CALL) == I2C_GENERALCALL_DISABLE) || \
+                                         ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH)      (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+                                         ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE)        (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+                                         ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE)          (((MODE) == I2C_RELOAD_MODE)   || \
+                                         ((MODE) == I2C_AUTOEND_MODE) || \
+                                         ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST)    (((REQUEST) == I2C_GENERATE_STOP)        || \
+                                         ((REQUEST) == I2C_GENERATE_START_READ)  || \
+                                         ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+                                         ((REQUEST) == I2C_NO_STARTSTOP))
+
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST)  (((REQUEST) == I2C_FIRST_FRAME)          || \
+                                                   ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
+                                                   ((REQUEST) == I2C_NEXT_FRAME)           || \
+                                                   ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+                                                   ((REQUEST) == I2C_LAST_FRAME)           || \
+                                                   ((REQUEST) == I2C_LAST_FRAME_NO_STOP)   || \
+                                                   IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
+
+#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME)     || \
+                                                        ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
+
+#define I2C_RESET_CR2(__HANDLE__)                 ((__HANDLE__)->Instance->CR2 &= \
+                                                   (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__)            ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
+#define I2C_GET_DIR(__HANDLE__)                   ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
+#define I2C_GET_STOP_MODE(__HANDLE__)             ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define I2C_GET_OWN_ADDRESS1(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
+#define I2C_GET_OWN_ADDRESS2(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1)             ((ADDRESS1) <= 0x000003FFU)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2)             ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__)              ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \
+                                                                         (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__)              ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+                                                     (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) &  ((__FLAG__) & I2C_FLAG_MASK)) == \
+                                                    ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
+#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__)      ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
+/**
+  * @}
+  */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+/* Private functions are defined in stm32f0xx_hal_i2c.c file */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h
new file mode 100644
index 0000000..8679506
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h
@@ -0,0 +1,174 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_i2c_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2C HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_I2C_EX_H
+#define STM32F0xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2CEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+  * @{
+  */
+#define I2C_ANALOGFILTER_ENABLE         0x00000000U
+#define I2C_ANALOGFILTER_DISABLE        I2C_CR1_ANFOFF
+/**
+  * @}
+  */
+
+/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
+  * @{
+  */
+#define I2C_FMP_NOT_SUPPORTED           0xAAAA0000U                                     /*!< Fast Mode Plus not supported       */
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
+#define I2C_FASTMODEPLUS_PA9            SYSCFG_CFGR1_I2C_FMP_PA9                        /*!< Enable Fast Mode Plus on PA9       */
+#define I2C_FASTMODEPLUS_PA10           SYSCFG_CFGR1_I2C_FMP_PA10                       /*!< Enable Fast Mode Plus on PA10      */
+#else
+#define I2C_FASTMODEPLUS_PA9            (uint32_t)(0x00000001U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA9 not supported   */
+#define I2C_FASTMODEPLUS_PA10           (uint32_t)(0x00000002U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA10 not supported  */
+#endif
+#define I2C_FASTMODEPLUS_PB6            SYSCFG_CFGR1_I2C_FMP_PB6                        /*!< Enable Fast Mode Plus on PB6       */
+#define I2C_FASTMODEPLUS_PB7            SYSCFG_CFGR1_I2C_FMP_PB7                        /*!< Enable Fast Mode Plus on PB7       */
+#define I2C_FASTMODEPLUS_PB8            SYSCFG_CFGR1_I2C_FMP_PB8                        /*!< Enable Fast Mode Plus on PB8       */
+#define I2C_FASTMODEPLUS_PB9            SYSCFG_CFGR1_I2C_FMP_PB9                        /*!< Enable Fast Mode Plus on PB9       */
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1)
+#define I2C_FASTMODEPLUS_I2C1           SYSCFG_CFGR1_I2C_FMP_I2C1                       /*!< Enable Fast Mode Plus on I2C1 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C1           (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported  */
+#endif
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2)
+#define I2C_FASTMODEPLUS_I2C2           SYSCFG_CFGR1_I2C_FMP_I2C2                       /*!< Enable Fast Mode Plus on I2C2 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C2           (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported  */
+#endif
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+  * @brief    Extended features functions
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c,
+                                                              uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c,
+                                                               uint32_t DigitalFilter);
+#if defined(I2C_CR1_WUPEN)
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
+#endif
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
+  * @{
+  */
+#define IS_I2C_ANALOG_FILTER(FILTER)    (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+                                                        ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER)   ((FILTER) <= 0x0000000FU)
+
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \
+                                                        ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9))  == I2C_FASTMODEPLUS_PA9)     || \
+                                                         (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10)    || \
+                                                         (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6))  == I2C_FASTMODEPLUS_PB6)     || \
+                                                         (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7))  == I2C_FASTMODEPLUS_PB7)     || \
+                                                         (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8))  == I2C_FASTMODEPLUS_PB8)     || \
+                                                         (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9))  == I2C_FASTMODEPLUS_PB9)     || \
+                                                         (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1)    || \
+                                                         (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2)))
+/**
+  * @}
+  */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
+  * @{
+  */
+/* Private functions are defined in stm32f0xx_hal_i2c_ex.c file */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_I2C_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
new file mode 100644
index 0000000..e716606
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
@@ -0,0 +1,189 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_H
+#define __STM32F0xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR PWR
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */ 
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        (0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02U)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02U)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+  * @{
+  */
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__ specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+  *                  was received from the WKUP pin or from the RTC alarm (Alarm A),
+  *                  RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+  *                  An additional wakeup event is detected if the WKUP pin is enabled
+  *                  (by setting the EWUP bit) when the WKUP pin level is already high.
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+  *                  For this reason, this bit is equal to 0 after Standby or reset
+  *                  until the PVDE bit is set. 
+  *                  Warning: this Flag is not available on STM32F030x8 products
+  *            @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+  *                  voltage VREFINT is ready.
+  *                  Warning: this Flag is not available on STM32F030x8 products
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the PWR's pending flags.
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag
+  *            @arg PWR_FLAG_SB: StandBy flag
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |=  (__FLAG__) << 2U)
+
+
+/**
+  * @}
+  */
+
+/* Include PWR HAL Extension module */
+#include "stm32f0xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+
+/* Peripheral Control functions  **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
new file mode 100644
index 0000000..a9ed6eb
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
@@ -0,0 +1,459 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_EX_H
+#define __STM32F0xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWREx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup PWREx_Exported_Types PWREx Exported Types
+ *  @{
+ */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || \
+    defined (STM32F091xC)
+
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level
+                            This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+  uint32_t Mode;       /*!< Mode: Specifies the operating mode for the selected pins.
+                            This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F072xB) || */
+       /* defined (STM32F091xC) */
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  * @{
+  */
+
+
+/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins
+  * @{
+  */
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+    defined (STM32F091xC) || defined (STM32F098xx)
+#define PWR_WAKEUP_PIN1                     ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2                     ((uint32_t)PWR_CSR_EWUP2)
+#define PWR_WAKEUP_PIN3                     ((uint32_t)PWR_CSR_EWUP3)
+#define PWR_WAKEUP_PIN4                     ((uint32_t)PWR_CSR_EWUP4)
+#define PWR_WAKEUP_PIN5                     ((uint32_t)PWR_CSR_EWUP5)
+#define PWR_WAKEUP_PIN6                     ((uint32_t)PWR_CSR_EWUP6)
+#define PWR_WAKEUP_PIN7                     ((uint32_t)PWR_CSR_EWUP7)
+#define PWR_WAKEUP_PIN8                     ((uint32_t)PWR_CSR_EWUP8)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+                                ((PIN) == PWR_WAKEUP_PIN2) || \
+                                ((PIN) == PWR_WAKEUP_PIN3) || \
+                                ((PIN) == PWR_WAKEUP_PIN4) || \
+                                ((PIN) == PWR_WAKEUP_PIN5) || \
+                                ((PIN) == PWR_WAKEUP_PIN6) || \
+                                ((PIN) == PWR_WAKEUP_PIN7) || \
+                                ((PIN) == PWR_WAKEUP_PIN8))
+
+#elif defined(STM32F030xC) || defined (STM32F070xB)
+#define PWR_WAKEUP_PIN1                     ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2                     ((uint32_t)PWR_CSR_EWUP2)
+#define PWR_WAKEUP_PIN4                     ((uint32_t)PWR_CSR_EWUP4)
+#define PWR_WAKEUP_PIN5                     ((uint32_t)PWR_CSR_EWUP5)
+#define PWR_WAKEUP_PIN6                     ((uint32_t)PWR_CSR_EWUP6)
+#define PWR_WAKEUP_PIN7                     ((uint32_t)PWR_CSR_EWUP7)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+                                ((PIN) == PWR_WAKEUP_PIN2) || \
+                                ((PIN) == PWR_WAKEUP_PIN4) || \
+                                ((PIN) == PWR_WAKEUP_PIN5) || \
+                                ((PIN) == PWR_WAKEUP_PIN6) || \
+                                ((PIN) == PWR_WAKEUP_PIN7))
+
+#elif defined(STM32F042x6) || defined (STM32F048xx)
+#define PWR_WAKEUP_PIN1                     ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2                     ((uint32_t)PWR_CSR_EWUP2)
+#define PWR_WAKEUP_PIN4                     ((uint32_t)PWR_CSR_EWUP4)
+#define PWR_WAKEUP_PIN6                     ((uint32_t)PWR_CSR_EWUP6)
+#define PWR_WAKEUP_PIN7                     ((uint32_t)PWR_CSR_EWUP7)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+                                ((PIN) == PWR_WAKEUP_PIN2) || \
+                                ((PIN) == PWR_WAKEUP_PIN4) || \
+                                ((PIN) == PWR_WAKEUP_PIN6) || \
+                                ((PIN) == PWR_WAKEUP_PIN7))
+
+#else
+#define PWR_WAKEUP_PIN1                     ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2                     ((uint32_t)PWR_CSR_EWUP2)
+
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+                                ((PIN) == PWR_WAKEUP_PIN2))
+
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_EXTI_Line PWREx EXTI Line
+  * @{
+  */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || \
+    defined (STM32F091xC)
+
+#define PWR_EXTI_LINE_PVD                   ((uint32_t)EXTI_IMR_MR16)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F072xB) || */
+       /* defined (STM32F091xC) */
+      
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+    defined (STM32F091xC) || defined (STM32F098xx)
+
+#define PWR_EXTI_LINE_VDDIO2                ((uint32_t)EXTI_IMR_MR31)  /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+          defined (STM32F091xC) || defined (STM32F098xx) ||*/
+/**
+  * @}
+  */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || \
+    defined (STM32F091xC)
+/** @defgroup PWREx_PVD_detection_level PWREx PVD detection level
+  * @{
+  */
+#define PWR_PVDLEVEL_0                      PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1                      PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2                      PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3                      PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4                      PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5                      PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6                      PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7                      PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_PVD_Mode PWREx PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 (0x00000000U)   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              (0x00010001U)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             (0x00010002U)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      (0x00010003U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           (0x00020001U)   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          (0x00020002U)   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   (0x00020003U)   /*!< Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL))
+/**
+  * @}
+  */
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F072xB) || */
+       /* defined (STM32F091xC) */
+
+/** @defgroup PWREx_Flag PWREx Flag
+  * @{
+  */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || \
+    defined (STM32F091xC)
+
+#define PWR_FLAG_WU                         PWR_CSR_WUF
+#define PWR_FLAG_SB                         PWR_CSR_SBF
+#define PWR_FLAG_PVDO                       PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY                 PWR_CSR_VREFINTRDYF
+#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC)
+#define PWR_FLAG_WU                         PWR_CSR_WUF
+#define PWR_FLAG_SB                         PWR_CSR_SBF
+#define PWR_FLAG_VREFINTRDY                 PWR_CSR_VREFINTRDYF
+#else
+#define PWR_FLAG_WU                         PWR_CSR_WUF
+#define PWR_FLAG_SB                         PWR_CSR_SBF
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F072xB) || */
+       /* defined (STM32F091xC) */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros PWREx Exported Macros
+  * @{
+  */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || \
+    defined (STM32F091xC)
+/**
+  * @brief Enable interrupt on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()      (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable interrupt on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()     (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+
+/**
+  * @brief  PVD EXTI line configuration: set falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief  PVD EXTI line configuration: set rising edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   EXTI->RTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief  Enable the PVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()       (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD EXTI flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()     (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT()  (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F072xB) || */
+       /* defined (STM32F091xC) */
+
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+    defined (STM32F091xC) || defined (STM32F098xx)
+/**
+  * @brief Enable interrupt on Vddio2 Monitor Exti Line 31.
+  * @retval None.
+  */
+#define __HAL_PWR_VDDIO2_EXTI_ENABLE_IT()             (EXTI->IMR |= (PWR_EXTI_LINE_VDDIO2))
+
+/**
+  * @brief Disable interrupt on Vddio2 Monitor Exti Line 31.
+  * @retval None.
+  */
+#define __HAL_PWR_VDDIO2_EXTI_DISABLE_IT()            (EXTI->IMR &= ~(PWR_EXTI_LINE_VDDIO2))
+
+/**
+  * @brief  Vddio2 Monitor EXTI line configuration: clear falling edge and rising edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE()                 \
+                        do{                                          \
+                            EXTI->FTSR &= ~(PWR_EXTI_LINE_VDDIO2);   \
+                            EXTI->RTSR &= ~(PWR_EXTI_LINE_VDDIO2);   \
+                          } while(0)
+                    
+/**
+  * @brief  Vddio2 Monitor EXTI line configuration: set falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (PWR_EXTI_LINE_VDDIO2)
+
+/**
+  * @brief Check whether the specified VDDIO2 monitor EXTI interrupt flag is set or not.
+  * @retval EXTI VDDIO2 Monitor Line Status.
+  */
+#define __HAL_PWR_VDDIO2_EXTI_GET_FLAG()              (EXTI->PR & (PWR_EXTI_LINE_VDDIO2))
+
+/**
+  * @brief Clear the VDDIO2 Monitor EXTI flag.
+  * @retval None.
+  */
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG()            (EXTI->PR = (PWR_EXTI_LINE_VDDIO2))
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
+  */
+#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2))
+
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+          defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ *  @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || \
+    defined (STM32F091xC)
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F072xB) || */
+       /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+    defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWREx_Vddio2Monitor_IRQHandler(void);
+void HAL_PWREx_Vddio2MonitorCallback(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+          defined (STM32F091xC) || defined (STM32F098xx) */
+
+/* Peripheral Control functions  **********************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || \
+    defined (STM32F091xC)
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F072xB) || */
+       /* defined (STM32F091xC) */
+       
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+    defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWREx_EnableVddio2Monitor(void);
+void HAL_PWREx_DisableVddio2Monitor(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+          defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h
new file mode 100644
index 0000000..4239c51
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h
@@ -0,0 +1,1686 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_rcc.h
+  * @author  MCD Application Team
+  * @brief   Header file of RCC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_H
+#define __STM32F0xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RCC
+  * @{
+  */
+
+/** @addtogroup RCC_Private_Constants
+  * @{
+  */
+
+/** @defgroup RCC_Timeout RCC Timeout
+  * @{
+  */ 
+  
+/* Disable Backup domain write protection state change timeout */
+#define RCC_DBP_TIMEOUT_VALUE      (100U)       /* 100 ms */
+/* LSE state change timeout */
+#define RCC_LSE_TIMEOUT_VALUE      LSE_STARTUP_TIMEOUT
+#define CLOCKSWITCH_TIMEOUT_VALUE  (5000U)  /* 5 s    */
+#define HSE_TIMEOUT_VALUE          HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE          (2U)      /* 2 ms (minimum Tick + 1U) */
+#define LSI_TIMEOUT_VALUE          (2U)      /* 2 ms (minimum Tick + 1U) */
+#define PLL_TIMEOUT_VALUE          (2U)      /* 2 ms (minimum Tick + 1U) */
+#define HSI14_TIMEOUT_VALUE        (2U)      /* 2 ms (minimum Tick + 1U) */
+#if defined(RCC_HSI48_SUPPORT)
+#define HSI48_TIMEOUT_VALUE        (2U)      /* 2 ms (minimum Tick + 1U) */
+#endif /* RCC_HSI48_SUPPORT */
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_Register_Offset Register offsets
+  * @{
+  */
+#define RCC_OFFSET                (RCC_BASE - PERIPH_BASE)
+#define RCC_CR_OFFSET             0x00
+#define RCC_CFGR_OFFSET           0x04
+#define RCC_CIR_OFFSET            0x08
+#define RCC_BDCR_OFFSET           0x20
+#define RCC_CSR_OFFSET            0x24
+
+/**
+  * @}
+  */
+
+  
+/* CR register byte 2 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS          ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U))
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS     ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U))
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS     ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U))
+
+/* Defines used for Flags */
+#define CR_REG_INDEX                     ((uint8_t)1U)
+#define CR2_REG_INDEX                    ((uint8_t)2U)
+#define BDCR_REG_INDEX                   ((uint8_t)3U)
+#define CSR_REG_INDEX                    ((uint8_t)4U)
+
+/* Bits position in  in the CFGR register */
+#define RCC_CFGR_PLLMUL_BITNUMBER         18U
+#define RCC_CFGR_HPRE_BITNUMBER           4U
+#define RCC_CFGR_PPRE_BITNUMBER           8U
+/* Flags in the CFGR2 register */
+#define RCC_CFGR2_PREDIV_BITNUMBER        0
+/* Flags in the CR register */
+#define RCC_CR_HSIRDY_BitNumber           1
+#define RCC_CR_HSERDY_BitNumber           17
+#define RCC_CR_PLLRDY_BitNumber           25
+/* Flags in the CR2 register */
+#define RCC_CR2_HSI14RDY_BitNumber        1
+#define RCC_CR2_HSI48RDY_BitNumber       16
+/* Flags in the BDCR register */
+#define RCC_BDCR_LSERDY_BitNumber         1
+/* Flags in the CSR register */
+#define RCC_CSR_LSIRDY_BitNumber          1
+#define RCC_CSR_V18PWRRSTF_BitNumber      23
+#define RCC_CSR_RMVF_BitNumber            24
+#define RCC_CSR_OBLRSTF_BitNumber         25
+#define RCC_CSR_PINRSTF_BitNumber         26
+#define RCC_CSR_PORRSTF_BitNumber         27
+#define RCC_CSR_SFTRSTF_BitNumber         28
+#define RCC_CSR_IWDGRSTF_BitNumber        29
+#define RCC_CSR_WWDGRSTF_BitNumber        30
+#define RCC_CSR_LPWRRSTF_BitNumber        31
+/* Flags in the HSITRIM register */
+#define RCC_CR_HSITRIM_BitNumber          3
+#define RCC_HSI14TRIM_BIT_NUMBER          3
+#define RCC_FLAG_MASK                    ((uint8_t)0x1FU)
+
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_Private_Macros
+  * @{
+  */
+#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
+                             ((__HSE__) == RCC_HSE_BYPASS))
+#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \
+                             ((__LSE__) == RCC_LSE_BYPASS))
+#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON))
+#define IS_RCC_HSI14(__HSI14__) (((__HSI14__) == RCC_HSI14_OFF) || ((__HSI14__) == RCC_HSI14_ON) || ((__HSI14__) == RCC_HSI14_ADC_CONTROL))
+#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU)
+#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
+#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \
+                             ((__PLL__) == RCC_PLL_ON))
+#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1)  || ((__PREDIV__) == RCC_PREDIV_DIV2)   || \
+                                  ((__PREDIV__) == RCC_PREDIV_DIV3)  || ((__PREDIV__) == RCC_PREDIV_DIV4)   || \
+                                  ((__PREDIV__) == RCC_PREDIV_DIV5)  || ((__PREDIV__) == RCC_PREDIV_DIV6)   || \
+                                  ((__PREDIV__) == RCC_PREDIV_DIV7)  || ((__PREDIV__) == RCC_PREDIV_DIV8)   || \
+                                  ((__PREDIV__) == RCC_PREDIV_DIV9)  || ((__PREDIV__) == RCC_PREDIV_DIV10)  || \
+                                  ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12)  || \
+                                  ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14)  || \
+                                  ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16))
+
+#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2)  || ((__MUL__) == RCC_PLL_MUL3)   || \
+                                 ((__MUL__) == RCC_PLL_MUL4)  || ((__MUL__) == RCC_PLL_MUL5)   || \
+                                 ((__MUL__) == RCC_PLL_MUL6)  || ((__MUL__) == RCC_PLL_MUL7)   || \
+                                 ((__MUL__) == RCC_PLL_MUL8)  || ((__MUL__) == RCC_PLL_MUL9)   || \
+                                 ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11)  || \
+                                 ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13)  || \
+                                 ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15)  || \
+                                 ((__MUL__) == RCC_PLL_MUL16))
+#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+                                   (((__CLK__) & RCC_CLOCKTYPE_HCLK)   == RCC_CLOCKTYPE_HCLK)   || \
+                                   (((__CLK__) & RCC_CLOCKTYPE_PCLK1)  == RCC_CLOCKTYPE_PCLK1))
+#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
+                               ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
+                               ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \
+                               ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \
+                               ((__HCLK__) == RCC_SYSCLK_DIV512))
+#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
+                               ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
+                               ((__PCLK__) == RCC_HCLK_DIV16))
+#define IS_RCC_MCO(__MCO__)  ((__MCO__) == RCC_MCO)
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__)  (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \
+                                          ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE)  || \
+                                          ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI)  || \
+                                          ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32))
+#define IS_RCC_USART1CLKSOURCE(__SOURCE__)  (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1)  || \
+                                             ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \
+                                             ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE)    || \
+                                             ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C1CLKSOURCE(__SOURCE__)  (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \
+                                           ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK))
+
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  RCC PLL configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t PLLState;      /*!< PLLState: The new state of the PLL.
+                              This parameter can be a value of @ref RCC_PLL_Config */
+
+  uint32_t PLLSource;     /*!< PLLSource: PLL entry clock source.
+                              This parameter must be a value of @ref RCC_PLL_Clock_Source */          
+
+  uint32_t PLLMUL;        /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+                              This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/
+
+  uint32_t PREDIV;        /*!< PREDIV: Predivision factor for PLL VCO input clock
+                              This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
+
+} RCC_PLLInitTypeDef;
+   
+/**
+  * @brief  RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t OscillatorType;        /*!< The oscillators to be configured.
+                                       This parameter can be a value of @ref RCC_Oscillator_Type */
+
+  uint32_t HSEState;              /*!< The new state of the HSE.
+                                       This parameter can be a value of @ref RCC_HSE_Config */
+
+  uint32_t LSEState;              /*!< The new state of the LSE.
+                                       This parameter can be a value of @ref RCC_LSE_Config */
+
+  uint32_t HSIState;              /*!< The new state of the HSI.
+                                       This parameter can be a value of @ref RCC_HSI_Config */
+
+  uint32_t HSICalibrationValue;   /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+                                       This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */
+
+  uint32_t HSI14State;             /*!< The new state of the HSI14.
+                                        This parameter can be a value of @ref RCC_HSI14_Config */
+
+  uint32_t HSI14CalibrationValue;  /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */
+
+  uint32_t LSIState;              /*!< The new state of the LSI.
+                                       This parameter can be a value of @ref RCC_LSI_Config */
+
+#if defined(RCC_HSI48_SUPPORT)
+  uint32_t HSI48State;            /*!< The new state of the HSI48.
+                                       This parameter can be a value of @ref RCC_HSI48_Config */
+
+#endif /* RCC_HSI48_SUPPORT */
+  RCC_PLLInitTypeDef PLL;         /*!< PLL structure parameters */     
+
+} RCC_OscInitTypeDef;
+
+/**
+  * @brief  RCC System, AHB and APB busses clock configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t ClockType;             /*!< The clock to be configured.
+                                       This parameter can be a value of @ref RCC_System_Clock_Type */
+
+  uint32_t SYSCLKSource;          /*!< The clock source (SYSCLKS) used as system clock.
+                                       This parameter can be a value of @ref RCC_System_Clock_Source */
+
+  uint32_t AHBCLKDivider;         /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+                                       This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+  uint32_t APB1CLKDivider;        /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+                                       This parameter can be a value of @ref RCC_APB1_Clock_Source */
+
+} RCC_ClkInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+  * @{
+  */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+  * @{
+  */
+
+#define RCC_PLLSOURCE_HSE           RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+  * @{
+  */
+#define RCC_OSCILLATORTYPE_NONE            (0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE             (0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI             (0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE             (0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI             (0x00000008U)
+#define RCC_OSCILLATORTYPE_HSI14           (0x00000010U)
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_OSCILLATORTYPE_HSI48           (0x00000020U)
+#endif /* RCC_HSI48_SUPPORT */
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSE_Config HSE Config
+  * @{
+  */
+#define RCC_HSE_OFF                      (0x00000000U)                     /*!< HSE clock deactivation */
+#define RCC_HSE_ON                       (0x00000001U)                     /*!< HSE clock activation */
+#define RCC_HSE_BYPASS                   (0x00000005U)                     /*!< External clock source for HSE clock */
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSE_Config LSE Config
+  * @{
+  */
+#define RCC_LSE_OFF                      (0x00000000U)                       /*!< LSE clock deactivation */
+#define RCC_LSE_ON                       (0x00000001U)                       /*!< LSE clock activation */
+#define RCC_LSE_BYPASS                   (0x00000005U)                       /*!< External clock source for LSE clock */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSI_Config HSI Config
+  * @{
+  */
+#define RCC_HSI_OFF                      (0x00000000U)           /*!< HSI clock deactivation */
+#define RCC_HSI_ON                       RCC_CR_HSION                     /*!< HSI clock activation */
+
+#define RCC_HSICALIBRATION_DEFAULT       (0x10U)         /* Default HSI calibration trimming value */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSI14_Config RCC HSI14 Config
+  * @{
+  */
+#define RCC_HSI14_OFF                    (0x00000000U)
+#define RCC_HSI14_ON                     RCC_CR2_HSI14ON
+#define RCC_HSI14_ADC_CONTROL            (~RCC_CR2_HSI14DIS)
+
+#define RCC_HSI14CALIBRATION_DEFAULT     (0x10U)   /* Default HSI14 calibration trimming value */
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_LSI_Config LSI Config
+  * @{
+  */
+#define RCC_LSI_OFF                      (0x00000000U)   /*!< LSI clock deactivation */
+#define RCC_LSI_ON                       RCC_CSR_LSION            /*!< LSI clock activation */
+
+/**
+  * @}
+  */
+
+#if defined(RCC_HSI48_SUPPORT)
+/** @defgroup RCC_HSI48_Config HSI48 Config
+  * @{
+  */
+#define RCC_HSI48_OFF               ((uint8_t)0x00U)
+#define RCC_HSI48_ON                ((uint8_t)0x01U)
+
+/**
+  * @}
+  */
+#endif /* RCC_HSI48_SUPPORT */
+
+/** @defgroup RCC_PLL_Config PLL Config
+  * @{
+  */
+#define RCC_PLL_NONE                      (0x00000000U)  /*!< PLL is not configured */
+#define RCC_PLL_OFF                       (0x00000001U)  /*!< PLL deactivation */
+#define RCC_PLL_ON                        (0x00000002U)  /*!< PLL activation */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+  * @{
+  */
+#define RCC_CLOCKTYPE_SYSCLK             (0x00000001U) /*!< SYSCLK to configure */
+#define RCC_CLOCKTYPE_HCLK               (0x00000002U) /*!< HCLK to configure */
+#define RCC_CLOCKTYPE_PCLK1              (0x00000004U) /*!< PCLK1 to configure */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_HSI             RCC_CFGR_SW_HSI /*!< HSI selected as system clock */
+#define RCC_SYSCLKSOURCE_HSE             RCC_CFGR_SW_HSE /*!< HSE selected as system clock */
+#define RCC_SYSCLKSOURCE_PLLCLK          RCC_CFGR_SW_PLL /*!< PLL selected as system clock */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_STATUS_HSI      RCC_CFGR_SWS_HSI            /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE      RCC_CFGR_SWS_HSE            /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK   RCC_CFGR_SWS_PLL            /*!< PLL used as system clock */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+  * @{
+  */
+#define RCC_SYSCLK_DIV1                  RCC_CFGR_HPRE_DIV1   /*!< SYSCLK not divided */
+#define RCC_SYSCLK_DIV2                  RCC_CFGR_HPRE_DIV2   /*!< SYSCLK divided by 2 */
+#define RCC_SYSCLK_DIV4                  RCC_CFGR_HPRE_DIV4   /*!< SYSCLK divided by 4 */
+#define RCC_SYSCLK_DIV8                  RCC_CFGR_HPRE_DIV8   /*!< SYSCLK divided by 8 */
+#define RCC_SYSCLK_DIV16                 RCC_CFGR_HPRE_DIV16  /*!< SYSCLK divided by 16 */
+#define RCC_SYSCLK_DIV64                 RCC_CFGR_HPRE_DIV64  /*!< SYSCLK divided by 64 */
+#define RCC_SYSCLK_DIV128                RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define RCC_SYSCLK_DIV256                RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define RCC_SYSCLK_DIV512                RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source
+  * @{
+  */
+#define RCC_HCLK_DIV1                    RCC_CFGR_PPRE_DIV1  /*!< HCLK not divided */
+#define RCC_HCLK_DIV2                    RCC_CFGR_PPRE_DIV2  /*!< HCLK divided by 2 */
+#define RCC_HCLK_DIV4                    RCC_CFGR_PPRE_DIV4  /*!< HCLK divided by 4 */
+#define RCC_HCLK_DIV8                    RCC_CFGR_PPRE_DIV8  /*!< HCLK divided by 8 */
+#define RCC_HCLK_DIV16                   RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+  * @{
+  */
+#define RCC_RTCCLKSOURCE_NO_CLK          (0x00000000U)                 /*!< No clock */
+#define RCC_RTCCLKSOURCE_LSE             RCC_BDCR_RTCSEL_LSE                  /*!< LSE oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_LSI             RCC_BDCR_RTCSEL_LSI                  /*!< LSI oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_HSE_DIV32       RCC_BDCR_RTCSEL_HSE                    /*!< HSE oscillator clock divided by 32 used as RTC clock */
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
+  * @{
+  */
+#define RCC_PLL_MUL2                     RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3                     RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4                     RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5                     RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6                     RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7                     RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8                     RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9                     RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10                    RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11                    RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12                    RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13                    RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14                    RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15                    RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16                    RCC_CFGR_PLLMUL16
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
+  * @{
+  */
+
+#define RCC_PREDIV_DIV1                  RCC_CFGR2_PREDIV_DIV1
+#define RCC_PREDIV_DIV2                  RCC_CFGR2_PREDIV_DIV2
+#define RCC_PREDIV_DIV3                  RCC_CFGR2_PREDIV_DIV3
+#define RCC_PREDIV_DIV4                  RCC_CFGR2_PREDIV_DIV4
+#define RCC_PREDIV_DIV5                  RCC_CFGR2_PREDIV_DIV5
+#define RCC_PREDIV_DIV6                  RCC_CFGR2_PREDIV_DIV6
+#define RCC_PREDIV_DIV7                  RCC_CFGR2_PREDIV_DIV7
+#define RCC_PREDIV_DIV8                  RCC_CFGR2_PREDIV_DIV8
+#define RCC_PREDIV_DIV9                  RCC_CFGR2_PREDIV_DIV9
+#define RCC_PREDIV_DIV10                 RCC_CFGR2_PREDIV_DIV10
+#define RCC_PREDIV_DIV11                 RCC_CFGR2_PREDIV_DIV11
+#define RCC_PREDIV_DIV12                 RCC_CFGR2_PREDIV_DIV12
+#define RCC_PREDIV_DIV13                 RCC_CFGR2_PREDIV_DIV13
+#define RCC_PREDIV_DIV14                 RCC_CFGR2_PREDIV_DIV14
+#define RCC_PREDIV_DIV15                 RCC_CFGR2_PREDIV_DIV15
+#define RCC_PREDIV_DIV16                 RCC_CFGR2_PREDIV_DIV16
+
+/**
+  * @}
+  */
+  
+
+/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source
+  * @{
+  */
+#define RCC_USART1CLKSOURCE_PCLK1        RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK       RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE          RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI          RCC_CFGR3_USART1SW_HSI
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
+  * @{
+  */
+#define RCC_I2C1CLKSOURCE_HSI            RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK         RCC_CFGR3_I2C1SW_SYSCLK
+
+/**
+  * @}
+  */
+/** @defgroup RCC_MCO_Index MCO Index
+  * @{
+  */
+#define RCC_MCO1                         (0x00000000U)
+#define RCC_MCO                          RCC_MCO1               /*!< MCO1 to be compliant with other families with 2 MCOs*/
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source
+  * @{
+  */
+#define RCC_MCO1SOURCE_NOCLOCK            RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCO1SOURCE_LSI                RCC_CFGR_MCO_LSI
+#define RCC_MCO1SOURCE_LSE                RCC_CFGR_MCO_LSE
+#define RCC_MCO1SOURCE_SYSCLK             RCC_CFGR_MCO_SYSCLK
+#define RCC_MCO1SOURCE_HSI                RCC_CFGR_MCO_HSI
+#define RCC_MCO1SOURCE_HSE                RCC_CFGR_MCO_HSE
+#define RCC_MCO1SOURCE_PLLCLK_DIV2        RCC_CFGR_MCO_PLL
+#define RCC_MCO1SOURCE_HSI14              RCC_CFGR_MCO_HSI14
+
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_Interrupt Interrupts
+  * @{
+  */
+#define RCC_IT_LSIRDY                    ((uint8_t)RCC_CIR_LSIRDYF)   /*!< LSI Ready Interrupt flag */
+#define RCC_IT_LSERDY                    ((uint8_t)RCC_CIR_LSERDYF)   /*!< LSE Ready Interrupt flag */
+#define RCC_IT_HSIRDY                    ((uint8_t)RCC_CIR_HSIRDYF)   /*!< HSI Ready Interrupt flag */
+#define RCC_IT_HSERDY                    ((uint8_t)RCC_CIR_HSERDYF)   /*!< HSE Ready Interrupt flag */
+#define RCC_IT_PLLRDY                    ((uint8_t)RCC_CIR_PLLRDYF)   /*!< PLL Ready Interrupt flag */
+#define RCC_IT_HSI14RDY                  ((uint8_t)RCC_CIR_HSI14RDYF) /*!< HSI14 Ready Interrupt flag */
+#if defined(RCC_CIR_HSI48RDYF)
+#define RCC_IT_HSI48RDY                  ((uint8_t)RCC_CIR_HSI48RDYF) /*!< HSI48 Ready Interrupt flag */
+#endif
+#define RCC_IT_CSS                       ((uint8_t)RCC_CIR_CSSF)      /*!< Clock Security System Interrupt flag */
+/**
+  * @}
+  */ 
+  
+/** @defgroup RCC_Flag Flags
+  *        Elements values convention: XXXYYYYYb
+  *           - YYYYY  : Flag position in the register
+  *           - XXX  : Register index
+  *                 - 001: CR register
+  *                 - 010: CR2 register
+  *                 - 011: BDCR register
+  *                 - 0100: CSR register
+  * @{
+  */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY                  ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_BitNumber))
+#define RCC_FLAG_HSERDY                  ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_BitNumber))
+#define RCC_FLAG_PLLRDY                  ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_BitNumber))
+/* Flags in the CR2 register */
+#define RCC_FLAG_HSI14RDY                ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI14RDY_BitNumber))
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY                  ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_BitNumber))
+#if   defined(RCC_CSR_V18PWRRSTF)
+#define RCC_FLAG_V18PWRRST               ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_V18PWRRSTF_BitNumber))
+#endif
+#define RCC_FLAG_OBLRST                  ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_BitNumber))
+#define RCC_FLAG_PINRST                  ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_BitNumber))      /*!< PIN reset flag */
+#define RCC_FLAG_PORRST                  ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_BitNumber))      /*!< POR/PDR reset flag */
+#define RCC_FLAG_SFTRST                  ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_BitNumber))      /*!< Software Reset flag */
+#define RCC_FLAG_IWDGRST                 ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_BitNumber))     /*!< Independent Watchdog reset flag */
+#define RCC_FLAG_WWDGRST                 ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_BitNumber))     /*!< Window watchdog reset flag */
+#define RCC_FLAG_LPWRRST                 ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_BitNumber))     /*!< Low-Power reset flag */
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY                  ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_BitNumber))     /*!< External Low Speed oscillator Ready */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+  * @{
+  */
+
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+  * @brief  Enable or disable the AHB peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{  
+  */
+#define __HAL_RCC_GPIOA_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_GPIOB_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_GPIOC_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_GPIOF_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_CRC_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_DMA1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_SRAM_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_FLITF_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __HAL_RCC_CRC_CLK_DISABLE()          (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE()         (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __HAL_RCC_SRAM_CLK_DISABLE()         (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __HAL_RCC_FLITF_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status
+  * @brief  Get the enable or disable status of the AHB peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED()     ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED()     ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED()     ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED()     ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED()       ((RCC->AHBENR & (RCC_AHBENR_CRCEN))   != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED()      ((RCC->AHBENR & (RCC_AHBENR_DMA1EN))  != RESET)
+#define __HAL_RCC_SRAM_IS_CLK_ENABLED()      ((RCC->AHBENR & (RCC_AHBENR_SRAMEN))  != RESET)
+#define __HAL_RCC_FLITF_IS_CLK_ENABLED()     ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED()    ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED()    ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED()    ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED()    ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED()      ((RCC->AHBENR & (RCC_AHBENR_CRCEN))   == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED()     ((RCC->AHBENR & (RCC_AHBENR_DMA1EN))  == RESET)
+#define __HAL_RCC_SRAM_IS_CLK_DISABLED()     ((RCC->AHBENR & (RCC_AHBENR_SRAMEN))  == RESET)
+#define __HAL_RCC_FLITF_IS_CLK_DISABLED()    ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET)
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+  * @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{   
+  */
+#define __HAL_RCC_TIM3_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_TIM14_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_WWDG_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_I2C1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_PWR_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_I2C1_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_PWR_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+  * @brief  Get the enable or disable status of the APB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN))  != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN))  != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN))  != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_PWREN))   != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN))  == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN))  == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN))  == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_PWREN))   == RESET)
+/**
+  * @}
+  */
+  
+  
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+  * @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{   
+  */
+#define __HAL_RCC_SYSCFG_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_ADC1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_TIM1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_SPI1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_TIM16_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_TIM17_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_USART1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_DBGMCU_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\
+                                        /* Delay after an RCC peripheral clock enabling */\
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_ADC1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_TIM1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_TIM16_CLK_DISABLE()  (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __HAL_RCC_TIM17_CLK_DISABLE()  (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+  * @brief  Get the enable or disable status of the APB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED()     ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED()       ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN))   != RESET)
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED()       ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN))   != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED()       ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN))   != RESET)
+#define __HAL_RCC_TIM16_IS_CLK_ENABLED()      ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN))  != RESET)
+#define __HAL_RCC_TIM17_IS_CLK_ENABLED()      ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN))  != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED()     ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED()     ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED()      ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN))   == RESET)
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED()      ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN))   == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED()      ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN))   == RESET)
+#define __HAL_RCC_TIM16_IS_CLK_DISABLED()     ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN))  == RESET)
+#define __HAL_RCC_TIM17_IS_CLK_DISABLED()     ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN))  == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) == RESET)
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+  * @brief  Force or release AHB peripheral reset.
+  * @{   
+  */ 
+#define __HAL_RCC_AHB_FORCE_RESET()     (RCC->AHBRSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOA_FORCE_RESET()   (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET()   (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET()   (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOF_FORCE_RESET()   (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+
+#define __HAL_RCC_AHB_RELEASE_RESET()   (RCC->AHBRSTR = 0x00000000U)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+  * @brief  Force or release APB1 peripheral reset.
+  * @{   
+  */  
+#define __HAL_RCC_APB1_FORCE_RESET()     (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM14_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_WWDG_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_I2C1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET()   (RCC->APB1RSTR = 0x00000000U)
+#define __HAL_RCC_TIM3_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_I2C1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+  * @brief  Force or release APB2 peripheral reset.
+  * @{   
+  */    
+#define __HAL_RCC_APB2_FORCE_RESET()     (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SYSCFG_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_ADC1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_TIM1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_USART1_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_TIM16_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_DBGMCU_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET()   (RCC->APB2RSTR = 0x00000000U)
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_ADC1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_TIM1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_TIM16_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST))
+/**
+  * @}
+  */
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+  * @{   
+  */
+
+/** @brief  Macros to enable or disable the Internal High Speed oscillator (HSI).
+  * @note   The HSI is stopped by hardware when entering STOP and STANDBY modes.
+  * @note   HSI can not be stopped if it is used as system clock source. In this case,
+  *         you have to select another source of the system clock then stop the HSI.  
+  * @note   After enabling the HSI, the application software should wait on HSIRDY
+  *         flag to be set indicating that HSI clock is stable and can be used as
+  *         system clock source.  
+  * @note   When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+  *         clock cycles.  
+  */
+#define __HAL_RCC_HSI_ENABLE()  SET_BIT(RCC->CR, RCC_CR_HSION)
+#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
+
+/** @brief  Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+  * @note   The calibration is used to compensate for the variations in voltage
+  *         and temperature that influence the frequency of the internal HSI RC.
+  * @param  _HSICALIBRATIONVALUE_ specifies the calibration trimming value.
+  *         (default is RCC_HSICALIBRATION_DEFAULT).
+  *         This parameter must be a number between 0 and 0x1F.
+  */  
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \
+                  MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_BitNumber)
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSI_Configuration  LSI Configuration
+  * @{   
+  */
+
+/** @brief Macro to enable the Internal Low Speed oscillator (LSI).
+  * @note   After enabling the LSI, the application software should wait on 
+  *         LSIRDY flag to be set indicating that LSI clock is stable and can
+  *         be used to clock the IWDG and/or the RTC.
+  */
+#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
+
+/** @brief Macro to disable the Internal Low Speed oscillator (LSI).
+  * @note   LSI can not be disabled if the IWDG is running.  
+  * @note   When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+  *         clock cycles. 
+  */
+#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+  * @{   
+  */
+
+/**
+  * @brief  Macro to configure the External High Speed oscillator (HSE).
+  * @note   Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+  *         supported by this macro. User should request a transition to HSE Off
+  *         first and then HSE On or HSE Bypass.
+  * @note   After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+  *         software should wait on HSERDY flag to be set indicating that HSE clock
+  *         is stable and can be used to clock the PLL and/or system clock.
+  * @note   HSE state can not be changed if it is used directly or through the
+  *         PLL as system clock. In this case, you have to select another source
+  *         of the system clock then change the HSE state (ex. disable it).
+  * @note   The HSE is stopped by hardware when entering STOP and STANDBY modes.
+  * @note   This function reset the CSSON bit, so if the clock security system(CSS)
+  *         was previously enabled you have to enable it again after calling this
+  *         function.
+  * @param  __STATE__ specifies the new state of the HSE.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after
+  *                              6 HSE oscillator clock cycles.
+  *            @arg @ref RCC_HSE_ON turn ON the HSE oscillator
+  *            @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock
+  */
+#define __HAL_RCC_HSE_CONFIG(__STATE__)                                     \
+                    do{                                                     \
+                      if ((__STATE__) == RCC_HSE_ON)                        \
+                      {                                                     \
+                        SET_BIT(RCC->CR, RCC_CR_HSEON);                     \
+                      }                                                     \
+                      else if ((__STATE__) == RCC_HSE_OFF)                  \
+                      {                                                     \
+                        CLEAR_BIT(RCC->CR, RCC_CR_HSEON);                   \
+                        CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);                  \
+                      }                                                     \
+                      else if ((__STATE__) == RCC_HSE_BYPASS)               \
+                      {                                                     \
+                        SET_BIT(RCC->CR, RCC_CR_HSEBYP);                    \
+                        SET_BIT(RCC->CR, RCC_CR_HSEON);                     \
+                      }                                                     \
+                      else                                                  \
+                      {                                                     \
+                        CLEAR_BIT(RCC->CR, RCC_CR_HSEON);                   \
+                        CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);                  \
+                      }                                                     \
+                    }while(0U)
+
+/**
+  * @brief  Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+  * @note   Predivision factor can not be changed if PLL is used as system clock
+  *         In this case, you have to select another source of the system clock, disable the PLL and
+  *         then change the HSE predivision factor.
+  * @param  __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
+  *         This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+  */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \
+                  MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+  * @{   
+  */
+
+/**
+  * @brief  Macro to configure the External Low Speed oscillator (LSE).
+  * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. 
+  * @note   As the LSE is in the Backup domain and write access is denied to
+  *         this domain after reset, you have to enable write access using 
+  *         @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+  *         (to be done once after reset).  
+  * @note   After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+  *         software should wait on LSERDY flag to be set indicating that LSE clock
+  *         is stable and can be used to clock the RTC.
+  * @param  __STATE__ specifies the new state of the LSE.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after
+  *                              6 LSE oscillator clock cycles.
+  *            @arg @ref RCC_LSE_ON turn ON the LSE oscillator.
+  *            @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock.
+  */
+#define __HAL_RCC_LSE_CONFIG(__STATE__)                                     \
+                    do{                                                     \
+                      if ((__STATE__) == RCC_LSE_ON)                        \
+                      {                                                     \
+                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);                   \
+                      }                                                     \
+                      else if ((__STATE__) == RCC_LSE_OFF)                  \
+                      {                                                     \
+                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);                 \
+                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);                \
+                      }                                                     \
+                      else if ((__STATE__) == RCC_LSE_BYPASS)               \
+                      {                                                     \
+                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);                  \
+                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);                   \
+                      }                                                     \
+                      else                                                  \
+                      {                                                     \
+                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);                 \
+                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);                \
+                      }                                                     \
+                    }while(0U)
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration
+  * @{   
+  */
+    
+/** @brief  Macro to enable the Internal 14Mhz High Speed oscillator (HSI14).
+  * @note   After enabling the HSI14 with @ref __HAL_RCC_HSI14_ENABLE(), the application software 
+  *         should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be 
+  *         used as system clock source. This is not necessary if @ref HAL_RCC_OscConfig() is used.
+  *         clock cycles.
+  */
+#define __HAL_RCC_HSI14_ENABLE()  SET_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+
+/** @brief  Macro to disable the Internal 14Mhz High Speed oscillator (HSI14).
+  * @note   The HSI14 is stopped by hardware when entering STOP and STANDBY modes.
+  * @note   HSI14 can not be stopped if it is used as system clock source. In this case,
+  *         you have to select another source of the system clock then stop the HSI14.
+  * @note   When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator
+  *         clock cycles.
+  */
+#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+
+/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC.
+  */
+#define __HAL_RCC_HSI14ADC_ENABLE()  CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+  
+/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC.
+  */
+#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+  
+/** @brief  Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value.
+  * @note   The calibration is used to compensate for the variations in voltage
+  *         and temperature that influence the frequency of the internal HSI14 RC.
+  * @param  __HSI14CALIBRATIONVALUE__ specifies the calibration trimming value 
+  *         (default is RCC_HSI14CALIBRATION_DEFAULT).
+  *         This parameter must be a number between 0 and 0x1F.
+  */
+#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CALIBRATIONVALUE__) \
+                  MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CALIBRATIONVALUE__) << RCC_HSI14TRIM_BIT_NUMBER)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+  * @{   
+  */
+    
+/** @brief  Macro to configure the USART1 clock (USART1CLK).
+  * @param  __USART1CLKSOURCE__ specifies the USART1 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+  *            @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+  *            @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+  *            @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+  */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \
+                  MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__))
+
+/** @brief  Macro to get the USART1 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+  *            @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+  *            @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+  *            @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+  */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+  * @{   
+  */
+
+/** @brief  Macro to configure the I2C1 clock (I2C1CLK).
+  * @param  __I2C1CLKSOURCE__ specifies the I2C1 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+  *            @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+  */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \
+                  MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__))
+
+/** @brief  Macro to get the I2C1 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+  *            @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+  */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+  * @{   
+  */
+
+/** @brief Macro to enable the main PLL.
+  * @note   After enabling the main PLL, the application software should wait on 
+  *         PLLRDY flag to be set indicating that PLL clock is stable and can
+  *         be used as system clock source.
+  * @note   The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+  */
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief Macro to disable the main PLL.
+  * @note   The main PLL can not be disabled if it is used as system clock source
+  */
+#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief  Macro to configure the PLL clock source, multiplication and division factors.
+  * @note   This function must be used only when the main PLL is disabled.
+  *  
+  * @param  __RCC_PLLSOURCE__ specifies the PLL entry clock source.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+  *            @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
+  * @param  __PLLMUL__ specifies the multiplication factor for PLL VCO output clock
+  *          This parameter can be one of the following values:
+  *         This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+  * @param  __PREDIV__ specifies the predivider factor for PLL VCO input clock
+  *         This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
+  *   
+  */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__ , __PREDIV__, __PLLMUL__) \
+                  do { \
+                    MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
+                    MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSOURCE__))); \
+                  } while(0U)
+
+
+/** @brief  Get oscillator clock selected as PLL input clock
+  * @retval The clock source used for PLL entry. The returned value can be one
+  *         of the following:
+  *             @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock
+  */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+  * @{   
+  */
+
+/**
+  * @brief  Macro to configure the system clock source.
+  * @param  __SYSCLKSOURCE__ specifies the system clock source.
+  *          This parameter can be one of the following values:
+  *              @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source.
+  *              @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source.
+  *              @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source.
+  */
+#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \
+                  MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__))
+
+/** @brief  Macro to get the clock source used as system clock.
+  * @retval The clock source used as system clock. The returned value can be one
+  *         of the following:
+  *             @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock
+  *             @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock
+  *             @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock
+  */
+#define __HAL_RCC_GET_SYSCLK_SOURCE()         ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+  * @{   
+  */ 
+
+#if defined(RCC_CFGR_MCOPRE)
+/** @brief  Macro to configure the MCO clock.
+  * @param  __MCOCLKSOURCE__ specifies the MCO clock source.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCO1SOURCE_NOCLOCK      No clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_SYSCLK       System Clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI          HSI oscillator clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSE          HSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSI          LSI selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSE          LSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI14        HSI14 selected as MCO clock
+  @if STM32F042x6
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F048xx
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F071xB
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F072xB
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F078xx
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F091xC
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F098xx
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F030x6
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F030xC
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F031x6
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F038xx
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F070x6
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F070xB
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @endif
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2  PLLCLK Divided by 2 selected as MCO clock
+  * @param  __MCODIV__ specifies the MCO clock prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCODIV_1   MCO clock source is divided by 1
+  *            @arg @ref RCC_MCODIV_2   MCO clock source is divided by 2
+  *            @arg @ref RCC_MCODIV_4   MCO clock source is divided by 4
+  *            @arg @ref RCC_MCODIV_8   MCO clock source is divided by 8
+  *            @arg @ref RCC_MCODIV_16  MCO clock source is divided by 16
+  *            @arg @ref RCC_MCODIV_32  MCO clock source is divided by 32
+  *            @arg @ref RCC_MCODIV_64  MCO clock source is divided by 64
+  *            @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128
+  */
+#else
+/** @brief  Macro to configure the MCO clock.
+  * @param  __MCOCLKSOURCE__ specifies the MCO clock source.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_MCO1SOURCE_NOCLOCK     No clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_SYSCLK      System Clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI         HSI selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSE         HSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSI         LSI selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSE         LSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI14       HSI14 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+  * @param  __MCODIV__ specifies the MCO clock prescaler.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_MCODIV_1 No division applied on MCO clock source
+  */
+#endif
+#if   defined(RCC_CFGR_MCOPRE)
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+                 MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+#else
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+                 MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__))
+
+#endif
+
+/**
+  * @}
+  */
+
+  /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+  * @{   
+  */
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+  * @note   As the RTC clock configuration bits are in the Backup domain and write
+  *         access is denied to this domain after reset, you have to enable write
+  *         access using the Power Backup Access macro before to configure
+  *         the RTC clock source (to be done once after reset).    
+  * @note   Once the RTC clock is configured it cannot be changed unless the  
+  *         Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by
+  *         a Power On Reset (POR).
+  *
+  * @param  __RTC_CLKSOURCE__ specifies the RTC clock source.
+  *          This parameter can be one of the following values:
+  *             @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+  *             @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+  *             @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+  *             @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+  * @note   If the LSE or LSI is used as RTC clock source, the RTC continues to
+  *         work in STOP and STANDBY modes, and can be used as wakeup source.
+  *         However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+  *         the RTC cannot be used in STOP and STANDBY modes.
+  * @note   The system must always be configured so as to get a PCLK frequency greater than or
+  *             equal to the RTCCLK frequency for a proper operation of the RTC.
+  */
+#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__))
+                                                   
+/** @brief Macro to get the RTC clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+  *            @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+  *            @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+  *            @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+  */
+#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))
+
+/** @brief Macro to enable the the RTC clock.
+  * @note   These macros must be used only after the RTC clock source was selected.
+  */
+#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+
+/** @brief Macro to disable the the RTC clock.
+  * @note  These macros must be used only after the RTC clock source was selected.
+  */
+#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+
+/** @brief  Macro to force the Backup domain reset.
+  * @note   This function resets the RTC peripheral (including the backup registers)
+  *         and the RTC clock source selection in RCC_BDCR register.
+  */
+#define __HAL_RCC_BACKUPRESET_FORCE()  SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) 
+
+/** @brief  Macros to release the Backup domain reset.
+  */
+#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) 
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+  * @brief macros to manage the specified RCC Flags and interrupts.
+  * @{
+  */
+
+/** @brief Enable RCC interrupt.
+  * @param  __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+  *            @arg @ref RCC_IT_LSERDY LSE ready interrupt
+  *            @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+  *            @arg @ref RCC_IT_HSERDY HSE ready interrupt
+  *            @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+  *            @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt
+  @if STM32F042x6
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F048xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F071xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F072xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F078xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F091xC
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F098xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @endif
+  */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt.
+  * @param  __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+  *            @arg @ref RCC_IT_LSERDY LSE ready interrupt
+  *            @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+  *            @arg @ref RCC_IT_HSERDY HSE ready interrupt
+  *            @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+  *            @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt
+  @if STM32F042x6
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F048xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F071xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F072xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F078xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F091xC
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F098xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @endif
+  */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits.
+  * @param  __INTERRUPT__ specifies the interrupt pending bit to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+  *            @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+  *            @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+  *            @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+  *            @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+  *            @arg @ref RCC_IT_CSS Clock Security System interrupt
+  *            @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt
+  @if STM32F042x6
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F048xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F071xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F072xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F078xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F091xC
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F098xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @endif
+  */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+  * @param  __INTERRUPT__ specifies the RCC interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+  *            @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+  *            @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+  *            @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+  *            @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+  *            @arg @ref RCC_IT_CSS Clock Security System interrupt
+  *            @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt enable
+  @if STM32F042x6
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F048xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F071xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F072xB
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F078xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F091xC
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @elseif STM32F098xx
+  *            @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+  @endif
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags.
+  *         The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+  *         RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+  */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief  Check RCC flag is set or not.
+  * @param  __FLAG__ specifies the flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready.
+  *            @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready.
+  *            @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready.
+  *            @arg @ref RCC_FLAG_HSI14RDY HSI14 oscillator clock ready
+  @if STM32F038xx
+  *            @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+  @elseif STM32F042x6
+  *            @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+  @elseif STM32F048xx
+  *            @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+  *            @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+  @elseif STM32F058xx
+  *            @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+  @elseif STM32F071xB
+  *            @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+  @elseif STM32F072xB
+  *            @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+  @elseif STM32F078xx
+  *            @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+  *            @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+  @elseif STM32F091xC
+  *            @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+  @elseif STM32F098xx
+  *            @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+  *            @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+  @endif
+  *            @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready.
+  *            @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready.
+  *            @arg @ref RCC_FLAG_OBLRST Option Byte Load reset
+  *            @arg @ref RCC_FLAG_PINRST  Pin reset.
+  *            @arg @ref RCC_FLAG_PORRST  POR/PDR reset.
+  *            @arg @ref RCC_FLAG_SFTRST  Software reset.
+  *            @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset.
+  *            @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset.
+  *            @arg @ref RCC_FLAG_LPWRRST Low Power reset.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR :      \
+                                       (((__FLAG__) >> 5U) == CR2_REG_INDEX)? RCC->CR2 :    \
+                                       (((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
+                                       RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Include RCC HAL Extension module */
+#include "stm32f0xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ******************************/
+HAL_StatusTypeDef HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t FLatency);
+
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+void              HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void              HAL_RCC_EnableCSS(void);
+/* CSS NMI IRQ handler */
+void              HAL_RCC_NMI_IRQHandler(void);
+/* User Callbacks in non blocking mode (IT mode) */
+void              HAL_RCC_CSSCallback(void);
+void              HAL_RCC_DisableCSS(void);
+uint32_t          HAL_RCC_GetSysClockFreq(void);
+uint32_t          HAL_RCC_GetHCLKFreq(void);
+uint32_t          HAL_RCC_GetPCLK1Freq(void);
+void              HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct);
+void              HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h
new file mode 100644
index 0000000..e599e97
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h
@@ -0,0 +1,2085 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_rcc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of RCC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_EX_H
+#define __STM32F0xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RCC
+  * @{
+  */ 
+
+/** @addtogroup RCC_Private_Macros
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE)                               || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE)  (((SOURCE) == RCC_SYSCLKSOURCE_HSI)    || \
+                                      ((SOURCE) == RCC_SYSCLKSOURCE_HSE)    || \
+                                      ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+                                      ((SOURCE) == RCC_SYSCLKSOURCE_HSI48))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI)    || \
+                                            ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE)    || \
+                                            ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK) || \
+                                            ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI48))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI)   || \
+                                  ((SOURCE) == RCC_PLLSOURCE_HSI48) || \
+                                  ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON))
+
+#else
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE)                               || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)     || \
+                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14))
+#define IS_RCC_SYSCLKSOURCE(SOURCE)  (((SOURCE) == RCC_SYSCLKSOURCE_HSI)    || \
+                                      ((SOURCE) == RCC_SYSCLKSOURCE_HSE)    || \
+                                      ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI)    || \
+                                            ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE)    || \
+                                            ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI)   || \
+                                  ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#endif /* RCC_HSI48_SUPPORT */
+
+#if defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE)  (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK)     || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_LSI)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_LSE)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_SYSCLK)       || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSI)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSE)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)       || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2)  || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSI14))
+
+#elif defined(RCC_CFGR_PLLNODIV) && defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE)  (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK)     || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_LSI)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_LSE)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_SYSCLK)       || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSI)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSE)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)       || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2)  || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSI14)        || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSI48))
+
+#elif !defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE)  (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK)     || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_LSI)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_LSE)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_SYSCLK)       || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSI)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSE)          || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2)  || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSI14))
+
+#endif /* RCC_CFGR_PLLNODIV && !RCC_CFGR_MCO_HSI48 */
+
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_Exported_Constants
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+
+/** @addtogroup RCC_PLL_Clock_Source
+  * @{
+  */
+#define RCC_PLLSOURCE_HSI                RCC_CFGR_PLLSRC_HSI_PREDIV
+#define RCC_PLLSOURCE_HSI48              RCC_CFGR_PLLSRC_HSI48_PREDIV
+
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_Interrupt
+  * @{
+  */
+#define RCC_IT_HSI48                   RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_Flag
+  * @{
+  */
+#define RCC_FLAG_HSI48RDY                ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI48RDY_BitNumber))
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_System_Clock_Source
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_HSI48           RCC_CFGR_SW_HSI48
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_System_Clock_Source_Status
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_STATUS_HSI48    RCC_CFGR_SWS_HSI48
+/**
+  * @}
+  */
+
+#else
+/** @addtogroup RCC_PLL_Clock_Source
+  * @{
+  */
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI                RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
+#define RCC_PLLSOURCE_HSI                RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
+
+/**
+  * @}
+  */
+
+#endif /* RCC_HSI48_SUPPORT */
+
+/** @addtogroup RCC_MCO_Clock_Source
+  * @{
+  */
+  
+#if defined(RCC_CFGR_PLLNODIV)
+
+#define RCC_MCO1SOURCE_PLLCLK       (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
+
+#endif /* RCC_CFGR_PLLNODIV */
+
+#if defined(RCC_CFGR_MCO_HSI48)
+
+#define RCC_MCO1SOURCE_HSI48        RCC_CFGR_MCO_HSI48
+
+#endif /* SRCC_CFGR_MCO_HSI48 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/** @addtogroup RCCEx
+  * @{
+  */
+
+/* Private Constants -------------------------------------------------------------*/
+#if defined(CRS)
+/** @addtogroup RCCEx_Private_Constants
+ * @{
+ */
+
+/* CRS IT Error Mask */
+#define  RCC_CRS_IT_ERROR_MASK   ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS))
+
+/* CRS Flag Error Mask */
+#define RCC_CRS_FLAG_ERROR_MASK  ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS))
+
+/**
+  * @}
+  */
+#endif /* CRS */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+  * @{
+  */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+                                                     RCC_PERIPHCLK_RTC))
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || 
+          STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+                                                     RCC_PERIPHCLK_RTC    | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1   | \
+                                                     RCC_PERIPHCLK_CEC    | RCC_PERIPHCLK_RTC    | \
+                                                     RCC_PERIPHCLK_USB))
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+                                                     RCC_PERIPHCLK_CEC    | RCC_PERIPHCLK_RTC))
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+                                                     RCC_PERIPHCLK_I2C1   | RCC_PERIPHCLK_CEC    | \
+                                                     RCC_PERIPHCLK_RTC))
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+                                                     RCC_PERIPHCLK_I2C1   | RCC_PERIPHCLK_CEC    | \
+                                                     RCC_PERIPHCLK_RTC    | RCC_PERIPHCLK_USB))
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+                                                     RCC_PERIPHCLK_I2C1   | RCC_PERIPHCLK_CEC    | \
+                                                     RCC_PERIPHCLK_RTC    | RCC_PERIPHCLK_USART3 ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+#define IS_RCC_USBCLKSOURCE(SOURCE)  (((SOURCE) == RCC_USBCLKSOURCE_HSI48) || \
+                                      ((SOURCE) == RCC_USBCLKSOURCE_PLL))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+#define IS_RCC_USBCLKSOURCE(SOURCE)  (((SOURCE) == RCC_USBCLKSOURCE_NONE) || \
+                                      ((SOURCE) == RCC_USBCLKSOURCE_PLL))
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE)  (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1)  || \
+                                         ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+                                         ((SOURCE) == RCC_USART2CLKSOURCE_LSE)    || \
+                                         ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_USART3CLKSOURCE(SOURCE)  (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1)  || \
+                                         ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+                                         ((SOURCE) == RCC_USART3CLKSOURCE_LSE)    || \
+                                         ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_CECCLKSOURCE(SOURCE)  (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+                                      ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(RCC_CFGR_MCOPRE)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1)  || ((DIV) == RCC_MCODIV_2)   || \
+                            ((DIV) == RCC_MCODIV_4)  || ((DIV) == RCC_MCODIV_8)   || \
+                            ((DIV) == RCC_MCODIV_16) || ((DIV) == RCC_MCODIV_32)  || \
+                            ((DIV) == RCC_MCODIV_64) || ((DIV) == RCC_MCODIV_128))
+#else
+  
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1))
+  
+#endif /* RCC_CFGR_MCOPRE */
+
+#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW)        || \
+                                     ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW)  || \
+                                     ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+                                     ((__DRIVE__) == RCC_LSEDRIVE_HIGH))
+
+#if defined(CRS)
+
+#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \
+                                          ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE)  || \
+                                          ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB))
+#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1)  || ((_DIV_) == RCC_CRS_SYNC_DIV2)  || \
+                                    ((_DIV_) == RCC_CRS_SYNC_DIV4)  || ((_DIV_) == RCC_CRS_SYNC_DIV8)  || \
+                                    ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \
+                                    ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128))
+#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \
+                                              ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING))
+#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFFU))
+#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFFU))
+#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3FU))
+#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \
+                                        ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN))
+#endif /* CRS */
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+  * @{
+  */
+
+/**
+  * @brief  RCC extended clocks structure definition  
+  */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  uint32_t RTCClockSelection;    /*!< Specifies RTC Clock Prescalers Selection 
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source
+                                      This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source
+                                      This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+          STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  uint32_t RTCClockSelection;    /*!< Specifies RTC Clock Prescalers Selection 
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source
+                                      This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source
+                                      This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+  uint32_t UsbClockSelection;    /*!< USB clock source
+                                      This parameter can be a value of @ref RCCEx_USB_Clock_Source */                                      
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  uint32_t RTCClockSelection;    /*!< Specifies RTC Clock Prescalers Selection 
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source
+                                      This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source
+                                      This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+  uint32_t CecClockSelection;    /*!< HDMI CEC clock source
+                                      This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+  uint32_t UsbClockSelection;    /*!< USB clock source
+                                      This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  uint32_t RTCClockSelection;    /*!< Specifies RTC Clock Prescalers Selection 
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source
+                                      This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source
+                                      This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+  uint32_t CecClockSelection;    /*!< HDMI CEC clock source
+                                      This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  uint32_t RTCClockSelection;    /*!< Specifies RTC Clock Prescalers Selection 
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source
+                                      This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+  uint32_t Usart2ClockSelection; /*!< USART2 clock source
+                                      This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source
+                                      This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+  uint32_t CecClockSelection;    /*!< HDMI CEC clock source
+                                      This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  uint32_t RTCClockSelection;    /*!< Specifies RTC Clock Prescalers Selection 
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source
+                                      This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+  uint32_t Usart2ClockSelection; /*!< USART2 clock source
+                                      This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source
+                                      This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+  uint32_t CecClockSelection;    /*!< HDMI CEC clock source
+                                      This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+  uint32_t UsbClockSelection;    /*!< USB clock source
+                                      This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F072xB || STM32F078xx */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  uint32_t RTCClockSelection;    /*!< Specifies RTC Clock Prescalers Selection 
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source
+                                      This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+  uint32_t Usart2ClockSelection; /*!< USART2 clock source
+                                      This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+  uint32_t Usart3ClockSelection; /*!< USART3 clock source
+                                      This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source
+                                      This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+  uint32_t CecClockSelection;    /*!< HDMI CEC clock source
+                                      This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+/** 
+  * @brief RCC_CRS Init structure definition  
+  */
+typedef struct
+{
+  uint32_t Prescaler;             /*!< Specifies the division factor of the SYNC signal.
+                                     This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */
+
+  uint32_t Source;                /*!< Specifies the SYNC signal source.
+                                     This parameter can be a value of @ref RCCEx_CRS_SynchroSource */
+
+  uint32_t Polarity;              /*!< Specifies the input polarity for the SYNC signal source.
+                                     This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */
+
+  uint32_t ReloadValue;           /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event.
+                                      It can be calculated in using macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__)
+                                     This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/
+
+  uint32_t ErrorLimitValue;       /*!< Specifies the value to be used to evaluate the captured frequency error value.
+                                     This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */
+
+  uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator.
+                                     This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */
+
+}RCC_CRSInitTypeDef;
+
+/** 
+  * @brief RCC_CRS Synchronization structure definition  
+  */
+typedef struct
+{
+  uint32_t ReloadValue;           /*!< Specifies the value loaded in the Counter reload value.
+                                     This parameter must be a number between 0 and 0xFFFFU */
+
+  uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming.
+                                     This parameter must be a number between 0 and 0x3FU */
+
+  uint32_t FreqErrorCapture;      /*!< Specifies the value loaded in the .FECAP, the frequency error counter 
+                                                                    value latched in the time of the last SYNC event.
+                                    This parameter must be a number between 0 and 0xFFFFU */
+
+  uint32_t FreqErrorDirection;    /*!< Specifies the value loaded in the .FEDIR, the counting direction of the 
+                                                                    frequency error counter latched in the time of the last SYNC event. 
+                                                                    It shows whether the actual frequency is below or above the target.
+                                    This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/
+
+}RCC_CRSSynchroInfoTypeDef;
+
+#endif /* CRS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
+  * @{
+  */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+#define RCC_PERIPHCLK_USART1           (0x00000001U)
+#define RCC_PERIPHCLK_I2C1             (0x00000020U)
+#define RCC_PERIPHCLK_RTC              (0x00010000U)
+
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || 
+          STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1           (0x00000001U)
+#define RCC_PERIPHCLK_I2C1             (0x00000020U)
+#define RCC_PERIPHCLK_RTC              (0x00010000U)
+#define RCC_PERIPHCLK_USB              (0x00020000U)
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+#define RCC_PERIPHCLK_USART1           (0x00000001U)
+#define RCC_PERIPHCLK_I2C1             (0x00000020U)
+#define RCC_PERIPHCLK_CEC              (0x00000400U)
+#define RCC_PERIPHCLK_RTC              (0x00010000U)
+#define RCC_PERIPHCLK_USB              (0x00020000U)
+
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+#define RCC_PERIPHCLK_USART1           (0x00000001U)
+#define RCC_PERIPHCLK_I2C1             (0x00000020U)
+#define RCC_PERIPHCLK_CEC              (0x00000400U)
+#define RCC_PERIPHCLK_RTC              (0x00010000U)
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+#define RCC_PERIPHCLK_USART1           (0x00000001U)
+#define RCC_PERIPHCLK_USART2           (0x00000002U)
+#define RCC_PERIPHCLK_I2C1             (0x00000020U)
+#define RCC_PERIPHCLK_CEC              (0x00000400U)
+#define RCC_PERIPHCLK_RTC              (0x00010000U)
+
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+#define RCC_PERIPHCLK_USART1           (0x00000001U)
+#define RCC_PERIPHCLK_USART2           (0x00000002U)
+#define RCC_PERIPHCLK_I2C1             (0x00000020U)
+#define RCC_PERIPHCLK_CEC              (0x00000400U)
+#define RCC_PERIPHCLK_RTC              (0x00010000U)
+#define RCC_PERIPHCLK_USB              (0x00020000U)
+
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define RCC_PERIPHCLK_USART1           (0x00000001U)
+#define RCC_PERIPHCLK_USART2           (0x00000002U)
+#define RCC_PERIPHCLK_I2C1             (0x00000020U)
+#define RCC_PERIPHCLK_CEC              (0x00000400U)
+#define RCC_PERIPHCLK_RTC              (0x00010000U)
+#define RCC_PERIPHCLK_USART3           (0x00040000U)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+  * @}
+  */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+  * @{
+  */
+#define RCC_USBCLKSOURCE_HSI48         RCC_CFGR3_USBSW_HSI48  /*!< HSI48 clock selected as USB clock source */
+#define RCC_USBCLKSOURCE_PLL           RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+  * @{
+  */
+#define RCC_USBCLKSOURCE_NONE          (0x00000000U) /*!< USB clock disabled */
+#define RCC_USBCLKSOURCE_PLL           RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+  * @{
+  */
+#define RCC_USART2CLKSOURCE_PCLK1        RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK       RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE          RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI          RCC_CFGR3_USART2SW_HSI
+
+/**
+  * @}
+  */
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+  * @{
+  */
+#define RCC_USART3CLKSOURCE_PCLK1        RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK       RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE          RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI          RCC_CFGR3_USART3SW_HSI
+
+/**
+  * @}
+  */
+
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+  * @{
+  */
+#define RCC_CECCLKSOURCE_HSI             RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE             RCC_CFGR3_CECSW_LSE
+
+/**
+  * @}
+  */
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCCEx MCOx Clock Prescaler
+  * @{
+  */
+  
+#if defined(RCC_CFGR_MCOPRE)
+
+#define RCC_MCODIV_1                     (0x00000000U)
+#define RCC_MCODIV_2                     (0x10000000U)
+#define RCC_MCODIV_4                     (0x20000000U)
+#define RCC_MCODIV_8                     (0x30000000U)
+#define RCC_MCODIV_16                    (0x40000000U)
+#define RCC_MCODIV_32                    (0x50000000U)
+#define RCC_MCODIV_64                    (0x60000000U)
+#define RCC_MCODIV_128                   (0x70000000U)
+
+#else
+
+#define RCC_MCODIV_1                    (0x00000000U)
+
+#endif /* RCC_CFGR_MCOPRE */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_LSEDrive_Configuration RCC LSE Drive Configuration
+  * @{
+  */
+
+#define RCC_LSEDRIVE_LOW                 (0x00000000U) /*!< Xtal mode lower driving capability */
+#define RCC_LSEDRIVE_MEDIUMLOW           RCC_BDCR_LSEDRV_1      /*!< Xtal mode medium low driving capability */
+#define RCC_LSEDRIVE_MEDIUMHIGH          RCC_BDCR_LSEDRV_0      /*!< Xtal mode medium high driving capability */
+#define RCC_LSEDRIVE_HIGH                RCC_BDCR_LSEDRV        /*!< Xtal mode higher driving capability */
+
+/**
+  * @}
+  */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+  * @{
+  */
+#define RCC_CRS_NONE      (0x00000000U)
+#define RCC_CRS_TIMEOUT   (0x00000001U)
+#define RCC_CRS_SYNCOK    (0x00000002U)
+#define RCC_CRS_SYNCWARN  (0x00000004U)
+#define RCC_CRS_SYNCERR   (0x00000008U)
+#define RCC_CRS_SYNCMISS  (0x00000010U)
+#define RCC_CRS_TRIMOVF   (0x00000020U)
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS Synchronization Source
+  * @{
+  */
+#define RCC_CRS_SYNC_SOURCE_GPIO       (0x00000000U) /*!< Synchro Signal source GPIO */
+#define RCC_CRS_SYNC_SOURCE_LSE        CRS_CFGR_SYNCSRC_0      /*!< Synchro Signal source LSE */
+#define RCC_CRS_SYNC_SOURCE_USB        CRS_CFGR_SYNCSRC_1      /*!< Synchro Signal source USB SOF (default)*/
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS Synchronization Divider
+  * @{
+  */
+#define RCC_CRS_SYNC_DIV1        (0x00000000U)                   /*!< Synchro Signal not divided (default) */
+#define RCC_CRS_SYNC_DIV2        CRS_CFGR_SYNCDIV_0                        /*!< Synchro Signal divided by 2 */
+#define RCC_CRS_SYNC_DIV4        CRS_CFGR_SYNCDIV_1                        /*!< Synchro Signal divided by 4 */
+#define RCC_CRS_SYNC_DIV8        (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define RCC_CRS_SYNC_DIV16       CRS_CFGR_SYNCDIV_2                        /*!< Synchro Signal divided by 16 */
+#define RCC_CRS_SYNC_DIV32       (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define RCC_CRS_SYNC_DIV64       (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define RCC_CRS_SYNC_DIV128      CRS_CFGR_SYNCDIV                          /*!< Synchro Signal divided by 128 */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS Synchronization Polarity
+  * @{
+  */
+#define RCC_CRS_SYNC_POLARITY_RISING   (0x00000000U) /*!< Synchro Active on rising edge (default) */
+#define RCC_CRS_SYNC_POLARITY_FALLING  CRS_CFGR_SYNCPOL        /*!< Synchro Active on falling edge */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS Default Reload Value
+  * @{
+  */
+#define RCC_CRS_RELOADVALUE_DEFAULT    (0x0000BB7FU) /*!< The reset value of the RELOAD field corresponds 
+                                                                    to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */
+/**
+  * @}
+  */
+  
+/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS Default Error Limit Value
+  * @{
+  */
+#define RCC_CRS_ERRORLIMIT_DEFAULT     (0x00000022U) /*!< Default Frequency error limit */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS Default HSI48 Calibration vakye
+  * @{
+  */
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT (0x00000020U) /*!< The default value is 32, which corresponds to the middle of the trimming interval. 
+                                                                      The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value
+                                                                      corresponds to a higher output frequency */  
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS Frequency Error Direction
+  * @{
+  */
+#define RCC_CRS_FREQERRORDIR_UP        (0x00000000U)   /*!< Upcounting direction, the actual frequency is above the target */
+#define RCC_CRS_FREQERRORDIR_DOWN      ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources
+  * @{
+  */
+#define RCC_CRS_IT_SYNCOK              CRS_CR_SYNCOKIE           /*!< SYNC event OK */
+#define RCC_CRS_IT_SYNCWARN            CRS_CR_SYNCWARNIE         /*!< SYNC warning */
+#define RCC_CRS_IT_ERR                 CRS_CR_ERRIE              /*!< Error */
+#define RCC_CRS_IT_ESYNC               CRS_CR_ESYNCIE            /*!< Expected SYNC */
+#define RCC_CRS_IT_SYNCERR             CRS_CR_ERRIE              /*!< SYNC error */
+#define RCC_CRS_IT_SYNCMISS            CRS_CR_ERRIE              /*!< SYNC missed */
+#define RCC_CRS_IT_TRIMOVF             CRS_CR_ERRIE              /*!< Trimming overflow or underflow */
+
+/**
+  * @}
+  */
+  
+/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags
+  * @{
+  */
+#define RCC_CRS_FLAG_SYNCOK            CRS_ISR_SYNCOKF           /*!< SYNC event OK flag     */
+#define RCC_CRS_FLAG_SYNCWARN          CRS_ISR_SYNCWARNF         /*!< SYNC warning flag      */
+#define RCC_CRS_FLAG_ERR               CRS_ISR_ERRF              /*!< Error flag        */
+#define RCC_CRS_FLAG_ESYNC             CRS_ISR_ESYNCF            /*!< Expected SYNC flag     */
+#define RCC_CRS_FLAG_SYNCERR           CRS_ISR_SYNCERR           /*!< SYNC error */
+#define RCC_CRS_FLAG_SYNCMISS          CRS_ISR_SYNCMISS          /*!< SYNC missed*/
+#define RCC_CRS_FLAG_TRIMOVF           CRS_ISR_TRIMOVF           /*!< Trimming overflow or underflow */
+
+/**
+  * @}
+  */
+
+#endif /* CRS */
+
+/**
+  * @}
+  */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+  * @{
+  */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+  * @brief  Enables or disables the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_GPIOD_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_GPIOE_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+      
+#define __HAL_RCC_TSC_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_TSC_CLK_DISABLE()          (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DMA2_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_DMA2_CLK_DISABLE()        (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+      
+/** @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+       /* STM32F051x8 || STM32F058xx || STM32F070x6 || */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_SPI2_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_SPI2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_TIM2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+
+#endif /* STM32F031x6 || STM32F038xx ||             */
+       /* STM32F042x6 || STM32F048xx ||             */
+       /* STM32F051x8 || STM32F058xx ||             */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+
+#endif /* STM32F030x8 ||                               */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_DAC1_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+#endif /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_CEC_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_USART3_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_USART4_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_TIM7_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_USB_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+       /* STM32F072xB || STM32F078xx || STM32F070xB  */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_CAN1_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB  || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_CRS_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_CRSEN))
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_USART5_CLK_DISABLE()      (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) 
+
+#define __HAL_RCC_TIM15_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_TIM15_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_USART6_CLK_DISABLE()      (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+#define __HAL_RCC_USART8_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0U)
+
+#define __HAL_RCC_USART7_CLK_DISABLE()      (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
+#define __HAL_RCC_USART8_CLK_DISABLE()      (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+  * @brief  Forces or releases peripheral reset.
+  * @{
+  */
+
+/** @brief  Force or release AHB peripheral reset.
+  */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_FORCE_RESET()   (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_FORCE_RESET()   (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+      
+#define __HAL_RCC_TSC_FORCE_RESET()     (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __HAL_RCC_TSC_RELEASE_RESET()   (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+/** @brief  Force or release APB1 peripheral reset.
+  */
+#if defined(STM32F030x8) \
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_SPI2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+
+#endif /* STM32F031x6 || STM32F038xx ||             */
+       /* STM32F042x6 || STM32F048xx ||             */
+       /* STM32F051x8 || STM32F058xx ||             */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_I2C2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+
+#endif /* STM32F030x8 ||                               */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_DAC1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+#endif /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_CEC_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_USART3_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_USART4_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART4RST))
+
+#define __HAL_RCC_TIM7_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __HAL_RCC_USB_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+       /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __HAL_RCC_CAN1_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_CRSRST))
+
+#define __HAL_RCC_CRS_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CRSRST))
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
+
+#define __HAL_RCC_USART5_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+
+/** @brief  Force or release APB2 peripheral reset.
+  */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM15_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+
+#define __HAL_RCC_TIM15_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __HAL_RCC_USART6_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
+#define __HAL_RCC_USART8_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
+
+#define __HAL_RCC_USART7_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
+#define __HAL_RCC_USART8_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status
+  * @brief  Get the enable or disable status of peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+/** @brief  AHB Peripheral Clock Enable Disable Status
+  */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED()     ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED()    ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET)
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED()     ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED()    ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET)
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+      
+#define __HAL_RCC_TSC_IS_CLK_ENABLED()       ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) != RESET)
+#define __HAL_RCC_TSC_IS_CLK_DISABLED()      ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED()      ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED()     ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx */
+      
+/** @brief  APB1 Peripheral Clock Enable Disable Status
+  */
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+       /* STM32F051x8 || STM32F058xx || STM32F070x6 || */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+
+#endif /* STM32F031x6 || STM32F038xx ||             */
+       /* STM32F042x6 || STM32F048xx ||             */
+       /* STM32F051x8 || STM32F058xx ||             */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+
+#endif /* STM32F030x8 ||                               */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_IS_CLK_ENABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) != RESET)
+#define __HAL_RCC_DAC1_IS_CLK_DISABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) == RESET)
+
+#endif /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_IS_CLK_ENABLED()       ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_USART4_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_USART4_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) == RESET)
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_IS_CLK_ENABLED()       ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
+#define __HAL_RCC_USB_IS_CLK_DISABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+       /* STM32F072xB || STM32F078xx || STM32F070xB  */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB  || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_IS_CLK_ENABLED()       ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) != RESET)
+#define __HAL_RCC_CRS_IS_CLK_DISABLED()      ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) == RESET)
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) != RESET)
+#define __HAL_RCC_USART5_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief  APB1 Peripheral Clock Enable Disable Status
+  */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) 
+
+#define __HAL_RCC_TIM15_IS_CLK_ENABLED()     ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
+#define __HAL_RCC_TIM15_IS_CLK_DISABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+       /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) != RESET)
+#define __HAL_RCC_USART8_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) != RESET)
+#define __HAL_RCC_USART7_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) == RESET)
+#define __HAL_RCC_USART8_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+  * @}
+  */
+
+  
+/** @defgroup RCCEx_HSI48_Enable_Disable RCCEx HSI48 Enable Disable    
+  * @brief  Macros to enable or disable the Internal 48Mhz High Speed oscillator (HSI48).
+  * @note   The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
+  * @note   HSI48 can not be stopped if it is used as system clock source. In this case,
+  *         you have to select another source of the system clock then stop the HSI14.
+  * @note   After enabling the HSI48 with __HAL_RCC_HSI48_ENABLE(), the application software
+  *         should wait on HSI48RDY flag to be set indicating that HSI48 clock is stable and can be
+  *         used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
+  * @note   When the HSI48 is stopped, HSI48RDY flag goes low after 6 HSI48 oscillator
+  *         clock cycles.
+  * @{
+  */
+#if defined(RCC_HSI48_SUPPORT)
+
+#define __HAL_RCC_HSI48_ENABLE()  SET_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+
+/** @brief  Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+  * @retval The clock source can be one of the following values:
+  *            @arg @ref RCC_HSI48_ON  HSI48 enabled
+  *            @arg @ref RCC_HSI48_OFF HSI48 disabled
+  */
+#define __HAL_RCC_GET_HSI48_STATE() \
+                  (((uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48ON)) != RESET) ? RCC_HSI48_ON : RCC_HSI48_OFF)  
+
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
+  * @{
+  */
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @brief  Macro to configure the USB clock (USBCLK).
+  * @param  __USBCLKSOURCE__ specifies the USB clock source.
+  *         This parameter can be one of the following values:
+@if STM32F070xB
+@elseif STM32F070x6
+@else
+  *            @arg @ref RCC_USBCLKSOURCE_HSI48  HSI48 selected as USB clock
+@endif  
+  *            @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+  */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
+                  MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, (uint32_t)(__USBCLKSOURCE__))
+
+/** @brief  Macro to get the USB clock source.
+  * @retval The clock source can be one of the following values:
+@if STM32F070xB
+@elseif STM32F070x6
+@else
+  *            @arg @ref RCC_USBCLKSOURCE_HSI48  HSI48 selected as USB clock
+@endif  
+  *            @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+  */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+       /* STM32F072xB || STM32F078xx || */
+       /* STM32F070x6 || STM32F070xB    */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @brief  Macro to configure the CEC clock.
+  * @param  __CECCLKSOURCE__ specifies the CEC clock source.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+  *            @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+  */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSOURCE__) \
+                  MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSOURCE__))
+
+/** @brief  Macro to get the HDMI CEC clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+  *            @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+  */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || defined(STM32F098xx) */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief  Macro to configure the USART2 clock (USART2CLK).
+  * @param  __USART2CLKSOURCE__ specifies the USART2 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+  *            @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+  *            @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+  *            @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+  */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSOURCE__) \
+                  MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSOURCE__))
+
+/** @brief  Macro to get the USART2 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+  *            @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+  *            @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+  *            @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+  */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief  Macro to configure the USART3 clock (USART3CLK).
+  * @param  __USART3CLKSOURCE__ specifies the USART3 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+  *            @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+  *            @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+  *            @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+  */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSOURCE__) \
+                  MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSOURCE__))
+
+/** @brief  Macro to get the USART3 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+  *            @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+  *            @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+  *            @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+  */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_LSE_Configuration LSE Drive Configuration
+  * @{   
+  */
+
+/**
+  * @brief  Macro to configure the External Low Speed oscillator (LSE) drive capability.
+  * @param  __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_LSEDRIVE_LOW        LSE oscillator low drive capability.
+  *            @arg @ref RCC_LSEDRIVE_MEDIUMLOW  LSE oscillator medium low drive capability.
+  *            @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
+  *            @arg @ref RCC_LSEDRIVE_HIGH       LSE oscillator high drive capability.
+  * @retval None
+  */ 
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->BDCR,\
+        RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/**
+  * @}
+  */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_IT_And_Flag RCCEx IT and Flag
+  * @{
+  */
+/* Interrupt & Flag management */
+
+/**
+  * @brief  Enable the specified CRS interrupts.
+  * @param  __INTERRUPT__ specifies the CRS interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *              @arg @ref RCC_CRS_IT_SYNCOK  SYNC event OK interrupt
+  *              @arg @ref RCC_CRS_IT_SYNCWARN  SYNC warning interrupt
+  *              @arg @ref RCC_CRS_IT_ERR  Synchronization or trimming error interrupt
+  *              @arg @ref RCC_CRS_IT_ESYNC  Expected SYNC interrupt
+  * @retval None
+  */
+#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__)   SET_BIT(CRS->CR, (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified CRS interrupts.
+  * @param  __INTERRUPT__ specifies the CRS interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *              @arg @ref RCC_CRS_IT_SYNCOK  SYNC event OK interrupt
+  *              @arg @ref RCC_CRS_IT_SYNCWARN  SYNC warning interrupt
+  *              @arg @ref RCC_CRS_IT_ERR  Synchronization or trimming error interrupt
+  *              @arg @ref RCC_CRS_IT_ESYNC  Expected SYNC interrupt
+  * @retval None
+  */
+#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__)  CLEAR_BIT(CRS->CR, (__INTERRUPT__))
+
+/** @brief  Check whether the CRS interrupt has occurred or not.
+  * @param  __INTERRUPT__ specifies the CRS interrupt source to check.
+  *         This parameter can be one of the following values:
+  *              @arg @ref RCC_CRS_IT_SYNCOK  SYNC event OK interrupt
+  *              @arg @ref RCC_CRS_IT_SYNCWARN  SYNC warning interrupt
+  *              @arg @ref RCC_CRS_IT_ERR  Synchronization or trimming error interrupt
+  *              @arg @ref RCC_CRS_IT_ESYNC  Expected SYNC interrupt
+  * @retval The new state of __INTERRUPT__ (SET or RESET).
+  */
+#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__)  ((READ_BIT(CRS->CR, (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/** @brief  Clear the CRS interrupt pending bits
+  * @param  __INTERRUPT__ specifies the interrupt pending bit to clear.
+  *         This parameter can be any combination of the following values:
+  *              @arg @ref RCC_CRS_IT_SYNCOK  SYNC event OK interrupt
+  *              @arg @ref RCC_CRS_IT_SYNCWARN  SYNC warning interrupt
+  *              @arg @ref RCC_CRS_IT_ERR  Synchronization or trimming error interrupt
+  *              @arg @ref RCC_CRS_IT_ESYNC  Expected SYNC interrupt
+  *              @arg @ref RCC_CRS_IT_TRIMOVF  Trimming overflow or underflow interrupt
+  *              @arg @ref RCC_CRS_IT_SYNCERR  SYNC error interrupt
+  *              @arg @ref RCC_CRS_IT_SYNCMISS  SYNC missed interrupt
+  */
+#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__)  do { \
+                                                 if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != RESET) \
+                                                 { \
+                                                   WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \
+                                                 } \
+                                                 else \
+                                                 { \
+                                                   WRITE_REG(CRS->ICR, (__INTERRUPT__)); \
+                                                 } \
+                                               } while(0U)
+
+/**
+  * @brief  Check whether the specified CRS flag is set or not.
+  * @param  __FLAG__ specifies the flag to check.
+  *          This parameter can be one of the following values:
+  *              @arg @ref RCC_CRS_FLAG_SYNCOK  SYNC event OK
+  *              @arg @ref RCC_CRS_FLAG_SYNCWARN  SYNC warning
+  *              @arg @ref RCC_CRS_FLAG_ERR  Error
+  *              @arg @ref RCC_CRS_FLAG_ESYNC  Expected SYNC
+  *              @arg @ref RCC_CRS_FLAG_TRIMOVF  Trimming overflow or underflow
+  *              @arg @ref RCC_CRS_FLAG_SYNCERR  SYNC error
+  *              @arg @ref RCC_CRS_FLAG_SYNCMISS  SYNC missed
+  * @retval The new state of _FLAG_ (TRUE or FALSE).
+  */
+#define __HAL_RCC_CRS_GET_FLAG(__FLAG__)  (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear the CRS specified FLAG.
+  * @param __FLAG__ specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *              @arg @ref RCC_CRS_FLAG_SYNCOK  SYNC event OK
+  *              @arg @ref RCC_CRS_FLAG_SYNCWARN  SYNC warning
+  *              @arg @ref RCC_CRS_FLAG_ERR  Error
+  *              @arg @ref RCC_CRS_FLAG_ESYNC  Expected SYNC
+  *              @arg @ref RCC_CRS_FLAG_TRIMOVF  Trimming overflow or underflow
+  *              @arg @ref RCC_CRS_FLAG_SYNCERR  SYNC error
+  *              @arg @ref RCC_CRS_FLAG_SYNCMISS  SYNC missed
+  * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR
+  * @retval None
+  */
+#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__)     do { \
+                                                 if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != RESET) \
+                                                 { \
+                                                   WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \
+                                                 } \
+                                                 else \
+                                                 { \
+                                                   WRITE_REG(CRS->ICR, (__FLAG__)); \
+                                                 } \
+                                               } while(0U)
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features
+  * @{
+  */  
+/**
+  * @brief  Enable the oscillator clock for frequency error counter.
+  * @note   when the CEN bit is set the CRS_CFGR register becomes write-protected.
+  * @retval None
+  */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE()  SET_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+  * @brief  Disable the oscillator clock for frequency error counter.
+  * @retval None
+  */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+  * @brief  Enable the automatic hardware adjustment of TRIM bits.
+  * @note   When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected.
+  * @retval None
+  */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE()     SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+  * @brief  Disable the automatic hardware adjustment of TRIM bits.
+  * @retval None
+  */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE()    CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+  * @brief  Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+  * @note   The RELOAD value should be selected according to the ratio between the target frequency and the frequency 
+  *             of the synchronization source after prescaling. It is then decreased by one in order to 
+  *             reach the expected synchronization on the zero value. The formula is the following:
+  *             RELOAD = (fTARGET / fSYNC) -1
+  * @param  __FTARGET__ Target frequency (value in Hz)
+  * @param  __FSYNC__   Synchronization signal frequency (value in Hz)
+  * @retval None
+  */
+#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__)  (((__FTARGET__) / (__FSYNC__)) - 1U)
+
+/**
+  * @}
+  */
+
+#endif /* CRS */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+  * @{
+  */
+  
+HAL_StatusTypeDef     HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit);
+void                  HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit);
+uint32_t              HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+  * @}
+  */
+
+#if defined(CRS)
+
+/** @addtogroup RCCEx_Exported_Functions_Group3
+  * @{
+  */
+
+void              HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
+void              HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
+void              HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
+uint32_t          HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+void              HAL_RCCEx_CRS_IRQHandler(void);
+void              HAL_RCCEx_CRS_SyncOkCallback(void);
+void              HAL_RCCEx_CRS_SyncWarnCallback(void);
+void              HAL_RCCEx_CRS_ExpectedSyncCallback(void);
+void              HAL_RCCEx_CRS_ErrorCallback(uint32_t Error);
+
+/**
+  * @}
+  */
+
+#endif /* CRS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */  
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h
new file mode 100644
index 0000000..0f57c73
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h
@@ -0,0 +1,2125 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_tim.h
+  * @author  MCD Application Team
+  * @brief   Header file of TIM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_TIM_H
+#define STM32F0xx_HAL_TIM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIM
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+  * @{
+  */
+
+/**
+  * @brief  TIM Time base Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;         /*!< Specifies the prescaler value used to divide the TIM clock.
+                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t CounterMode;       /*!< Specifies the counter mode.
+                                   This parameter can be a value of @ref TIM_Counter_Mode */
+
+  uint32_t Period;            /*!< Specifies the period value to be loaded into the active
+                                   Auto-Reload Register at the next update event.
+                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.  */
+
+  uint32_t ClockDivision;     /*!< Specifies the clock division.
+                                   This parameter can be a value of @ref TIM_ClockDivision */
+
+  uint32_t RepetitionCounter;  /*!< Specifies the repetition counter value. Each time the RCR downcounter
+                                    reaches zero, an update event is generated and counting restarts
+                                    from the RCR value (N).
+                                    This means in PWM mode that (N+1) corresponds to:
+                                        - the number of PWM periods in edge-aligned mode
+                                        - the number of half PWM period in center-aligned mode
+                                     GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+                                     Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t AutoReloadPreload;  /*!< Specifies the auto-reload preload.
+                                   This parameter can be a value of @ref TIM_AutoReloadPreload */
+} TIM_Base_InitTypeDef;
+
+/**
+  * @brief  TIM Output Compare Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t OCMode;        /*!< Specifies the TIM mode.
+                               This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t OCPolarity;    /*!< Specifies the output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+                               @note This parameter is valid only for timer instances supporting break feature. */
+
+  uint32_t OCFastMode;    /*!< Specifies the Fast mode state.
+                               This parameter can be a value of @ref TIM_Output_Fast_State
+                               @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+                               @note This parameter is valid only for timer instances supporting break feature. */
+
+  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+                               @note This parameter is valid only for timer instances supporting break feature. */
+} TIM_OC_InitTypeDef;
+
+/**
+  * @brief  TIM One Pulse Mode Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t OCMode;        /*!< Specifies the TIM mode.
+                               This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t OCPolarity;    /*!< Specifies the output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+                               @note This parameter is valid only for timer instances supporting break feature. */
+
+  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+                               @note This parameter is valid only for timer instances supporting break feature. */
+
+  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+                               @note This parameter is valid only for timer instances supporting break feature. */
+
+  uint32_t ICPolarity;    /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t ICSelection;   /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t ICFilter;      /*!< Specifies the input capture filter.
+                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+/**
+  * @brief  TIM Input Capture Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t  ICPolarity;  /*!< Specifies the active edge of the input signal.
+                              This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t ICSelection;  /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t ICPrescaler;  /*!< Specifies the Input Capture Prescaler.
+                              This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t ICFilter;     /*!< Specifies the input capture filter.
+                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+  * @brief  TIM Encoder Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t EncoderMode;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Encoder_Mode */
+
+  uint32_t IC1Polarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
+
+  uint32_t IC1Selection;  /*!< Specifies the input.
+                               This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t IC1Prescaler;  /*!< Specifies the Input Capture Prescaler.
+                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;     /*!< Specifies the input capture filter.
+                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t IC2Polarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
+
+  uint32_t IC2Selection;  /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t IC2Prescaler;  /*!< Specifies the Input Capture Prescaler.
+                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC2Filter;     /*!< Specifies the input capture filter.
+                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+  * @brief  Clock Configuration Handle Structure definition
+  */
+typedef struct
+{
+  uint32_t ClockSource;     /*!< TIM clock sources
+                                 This parameter can be a value of @ref TIM_Clock_Source */
+  uint32_t ClockPolarity;   /*!< TIM clock polarity
+                                 This parameter can be a value of @ref TIM_Clock_Polarity */
+  uint32_t ClockPrescaler;  /*!< TIM clock prescaler
+                                 This parameter can be a value of @ref TIM_Clock_Prescaler */
+  uint32_t ClockFilter;     /*!< TIM clock filter
+                                 This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_ClockConfigTypeDef;
+
+/**
+  * @brief  TIM Clear Input Configuration Handle Structure definition
+  */
+typedef struct
+{
+  uint32_t ClearInputState;      /*!< TIM clear Input state
+                                      This parameter can be ENABLE or DISABLE */
+  uint32_t ClearInputSource;     /*!< TIM clear Input sources
+                                      This parameter can be a value of @ref TIM_ClearInput_Source */
+  uint32_t ClearInputPolarity;   /*!< TIM Clear Input polarity
+                                      This parameter can be a value of @ref TIM_ClearInput_Polarity */
+  uint32_t ClearInputPrescaler;  /*!< TIM Clear Input prescaler
+                                      This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+  uint32_t ClearInputFilter;     /*!< TIM Clear Input filter
+                                      This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_ClearInputConfigTypeDef;
+
+/**
+  * @brief  TIM Master configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection
+                                        This parameter can be a value of @ref TIM_Master_Mode_Selection */
+  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection
+                                        This parameter can be a value of @ref TIM_Master_Slave_Mode
+                                        @note When the Master/slave mode is enabled, the effect of
+                                        an event on the trigger input (TRGI) is delayed to allow a
+                                        perfect synchronization between the current timer and its
+                                        slaves (through TRGO). It is not mandatory in case of timer
+                                        synchronization mode. */
+} TIM_MasterConfigTypeDef;
+
+/**
+  * @brief  TIM Slave configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t  SlaveMode;         /*!< Slave mode selection
+                                    This parameter can be a value of @ref TIM_Slave_Mode */
+  uint32_t  InputTrigger;      /*!< Input Trigger source
+                                    This parameter can be a value of @ref TIM_Trigger_Selection */
+  uint32_t  TriggerPolarity;   /*!< Input Trigger polarity
+                                    This parameter can be a value of @ref TIM_Trigger_Polarity */
+  uint32_t  TriggerPrescaler;  /*!< Input trigger prescaler
+                                    This parameter can be a value of @ref TIM_Trigger_Prescaler */
+  uint32_t  TriggerFilter;     /*!< Input trigger filter
+                                    This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF  */
+
+} TIM_SlaveConfigTypeDef;
+
+/**
+  * @brief  TIM Break input(s) and Dead time configuration Structure definition
+  * @note   2 break inputs can be configured (BKIN and BKIN2) with configurable
+  *        filter and polarity.
+  */
+typedef struct
+{
+  uint32_t OffStateRunMode;      /*!< TIM off state in run mode
+                                      This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+  uint32_t OffStateIDLEMode;     /*!< TIM off state in IDLE mode
+                                      This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+  uint32_t LockLevel;            /*!< TIM Lock level
+                                      This parameter can be a value of @ref TIM_Lock_level */
+  uint32_t DeadTime;             /*!< TIM dead Time
+                                      This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+  uint32_t BreakState;           /*!< TIM Break State
+                                      This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+  uint32_t BreakPolarity;        /*!< TIM Break input polarity
+                                      This parameter can be a value of @ref TIM_Break_Polarity */
+  uint32_t BreakFilter;          /*!< Specifies the break input filter.
+                                      This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+  uint32_t AutomaticOutput;      /*!< TIM Automatic Output Enable state
+                                      This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_TIM_STATE_RESET             = 0x00U,    /*!< Peripheral not yet initialized or disabled  */
+  HAL_TIM_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use    */
+  HAL_TIM_STATE_BUSY              = 0x02U,    /*!< An internal process is ongoing              */
+  HAL_TIM_STATE_TIMEOUT           = 0x03U,    /*!< Timeout state                               */
+  HAL_TIM_STATE_ERROR             = 0x04U     /*!< Reception process is ongoing                */
+} HAL_TIM_StateTypeDef;
+
+/**
+  * @brief  TIM Channel States definition
+  */
+typedef enum
+{
+  HAL_TIM_CHANNEL_STATE_RESET             = 0x00U,    /*!< TIM Channel initial state                         */
+  HAL_TIM_CHANNEL_STATE_READY             = 0x01U,    /*!< TIM Channel ready for use                         */
+  HAL_TIM_CHANNEL_STATE_BUSY              = 0x02U,    /*!< An internal process is ongoing on the TIM channel */
+} HAL_TIM_ChannelStateTypeDef;
+
+/**
+  * @brief  DMA Burst States definition
+  */
+typedef enum
+{
+  HAL_DMA_BURST_STATE_RESET             = 0x00U,    /*!< DMA Burst initial state */
+  HAL_DMA_BURST_STATE_READY             = 0x01U,    /*!< DMA Burst ready for use */
+  HAL_DMA_BURST_STATE_BUSY              = 0x02U,    /*!< Ongoing DMA Burst       */
+} HAL_TIM_DMABurstStateTypeDef;
+
+/**
+  * @brief  HAL Active channel structures definition
+  */
+typedef enum
+{
+  HAL_TIM_ACTIVE_CHANNEL_1        = 0x01U,    /*!< The active channel is 1     */
+  HAL_TIM_ACTIVE_CHANNEL_2        = 0x02U,    /*!< The active channel is 2     */
+  HAL_TIM_ACTIVE_CHANNEL_3        = 0x04U,    /*!< The active channel is 3     */
+  HAL_TIM_ACTIVE_CHANNEL_4        = 0x08U,    /*!< The active channel is 4     */
+  HAL_TIM_ACTIVE_CHANNEL_CLEARED  = 0x00U     /*!< All active channels cleared */
+} HAL_TIM_ActiveChannel;
+
+/**
+  * @brief  TIM Time Base Handle Structure definition
+  */
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+typedef struct __TIM_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+{
+  TIM_TypeDef                        *Instance;         /*!< Register base address                             */
+  TIM_Base_InitTypeDef               Init;              /*!< TIM Time Base required parameters                 */
+  HAL_TIM_ActiveChannel              Channel;           /*!< Active channel                                    */
+  DMA_HandleTypeDef                  *hdma[7];          /*!< DMA Handlers array
+                                                             This array is accessed by a @ref DMA_Handle_index */
+  HAL_LockTypeDef                    Lock;              /*!< Locking object                                    */
+  __IO HAL_TIM_StateTypeDef          State;             /*!< TIM operation state                               */
+  __IO HAL_TIM_ChannelStateTypeDef   ChannelState[4];   /*!< TIM channel operation state                       */
+  __IO HAL_TIM_ChannelStateTypeDef   ChannelNState[4];  /*!< TIM complementary channel operation state         */
+  __IO HAL_TIM_DMABurstStateTypeDef  DMABurstState;     /*!< DMA burst operation state                         */
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim);              /*!< TIM Base Msp Init Callback                              */
+  void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim);            /*!< TIM Base Msp DeInit Callback                            */
+  void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim);                /*!< TIM IC Msp Init Callback                                */
+  void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim);              /*!< TIM IC Msp DeInit Callback                              */
+  void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim);                /*!< TIM OC Msp Init Callback                                */
+  void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim);              /*!< TIM OC Msp DeInit Callback                              */
+  void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim);               /*!< TIM PWM Msp Init Callback                               */
+  void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim);             /*!< TIM PWM Msp DeInit Callback                             */
+  void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim);          /*!< TIM One Pulse Msp Init Callback                         */
+  void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim);        /*!< TIM One Pulse Msp DeInit Callback                       */
+  void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim);           /*!< TIM Encoder Msp Init Callback                           */
+  void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim);         /*!< TIM Encoder Msp DeInit Callback                         */
+  void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim);        /*!< TIM Hall Sensor Msp Init Callback                       */
+  void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim);      /*!< TIM Hall Sensor Msp DeInit Callback                     */
+  void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim);             /*!< TIM Period Elapsed Callback                             */
+  void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim);     /*!< TIM Period Elapsed half complete Callback               */
+  void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim);                   /*!< TIM Trigger Callback                                    */
+  void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim);           /*!< TIM Trigger half complete Callback                      */
+  void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim);                /*!< TIM Input Capture Callback                              */
+  void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim);        /*!< TIM Input Capture half complete Callback                */
+  void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim);           /*!< TIM Output Compare Delay Elapsed Callback               */
+  void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim);         /*!< TIM PWM Pulse Finished Callback                         */
+  void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback           */
+  void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim);                     /*!< TIM Error Callback                                      */
+  void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim);               /*!< TIM Commutation Callback                                */
+  void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim);       /*!< TIM Commutation half complete Callback                  */
+  void (* BreakCallback)(struct __TIM_HandleTypeDef *htim);                     /*!< TIM Break Callback                                      */
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+} TIM_HandleTypeDef;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL TIM Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_TIM_BASE_MSPINIT_CB_ID              = 0x00U   /*!< TIM Base MspInit Callback ID                              */
+  , HAL_TIM_BASE_MSPDEINIT_CB_ID          = 0x01U   /*!< TIM Base MspDeInit Callback ID                            */
+  , HAL_TIM_IC_MSPINIT_CB_ID              = 0x02U   /*!< TIM IC MspInit Callback ID                                */
+  , HAL_TIM_IC_MSPDEINIT_CB_ID            = 0x03U   /*!< TIM IC MspDeInit Callback ID                              */
+  , HAL_TIM_OC_MSPINIT_CB_ID              = 0x04U   /*!< TIM OC MspInit Callback ID                                */
+  , HAL_TIM_OC_MSPDEINIT_CB_ID            = 0x05U   /*!< TIM OC MspDeInit Callback ID                              */
+  , HAL_TIM_PWM_MSPINIT_CB_ID             = 0x06U   /*!< TIM PWM MspInit Callback ID                               */
+  , HAL_TIM_PWM_MSPDEINIT_CB_ID           = 0x07U   /*!< TIM PWM MspDeInit Callback ID                             */
+  , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID       = 0x08U   /*!< TIM One Pulse MspInit Callback ID                         */
+  , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID     = 0x09U   /*!< TIM One Pulse MspDeInit Callback ID                       */
+  , HAL_TIM_ENCODER_MSPINIT_CB_ID         = 0x0AU   /*!< TIM Encoder MspInit Callback ID                           */
+  , HAL_TIM_ENCODER_MSPDEINIT_CB_ID       = 0x0BU   /*!< TIM Encoder MspDeInit Callback ID                         */
+  , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID     = 0x0CU   /*!< TIM Hall Sensor MspDeInit Callback ID                     */
+  , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID   = 0x0DU   /*!< TIM Hall Sensor MspDeInit Callback ID                     */
+  , HAL_TIM_PERIOD_ELAPSED_CB_ID          = 0x0EU   /*!< TIM Period Elapsed Callback ID                             */
+  , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID     = 0x0FU   /*!< TIM Period Elapsed half complete Callback ID               */
+  , HAL_TIM_TRIGGER_CB_ID                 = 0x10U   /*!< TIM Trigger Callback ID                                    */
+  , HAL_TIM_TRIGGER_HALF_CB_ID            = 0x11U   /*!< TIM Trigger half complete Callback ID                      */
+
+  , HAL_TIM_IC_CAPTURE_CB_ID              = 0x12U   /*!< TIM Input Capture Callback ID                              */
+  , HAL_TIM_IC_CAPTURE_HALF_CB_ID         = 0x13U   /*!< TIM Input Capture half complete Callback ID                */
+  , HAL_TIM_OC_DELAY_ELAPSED_CB_ID        = 0x14U   /*!< TIM Output Compare Delay Elapsed Callback ID               */
+  , HAL_TIM_PWM_PULSE_FINISHED_CB_ID      = 0x15U   /*!< TIM PWM Pulse Finished Callback ID           */
+  , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U   /*!< TIM PWM Pulse Finished half complete Callback ID           */
+  , HAL_TIM_ERROR_CB_ID                   = 0x17U   /*!< TIM Error Callback ID                                      */
+  , HAL_TIM_COMMUTATION_CB_ID             = 0x18U   /*!< TIM Commutation Callback ID                                */
+  , HAL_TIM_COMMUTATION_HALF_CB_ID        = 0x19U   /*!< TIM Commutation half complete Callback ID                  */
+  , HAL_TIM_BREAK_CB_ID                   = 0x1AU   /*!< TIM Break Callback ID                                      */
+} HAL_TIM_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL TIM Callback pointer definition
+  */
+typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to the TIM callback function */
+
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+  * @{
+  */
+
+/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
+  * @{
+  */
+#define TIM_CLEARINPUTSOURCE_NONE           0x00000000U   /*!< OCREF_CLR is disabled */
+#define TIM_CLEARINPUTSOURCE_ETR            0x00000001U   /*!< OCREF_CLR is connected to ETRF input */
+#define TIM_CLEARINPUTSOURCE_OCREFCLR       0x00000002U   /*!< OCREF_CLR is connected to OCREF_CLR_INT */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base Address
+  * @{
+  */
+#define TIM_DMABASE_CR1                    0x00000000U
+#define TIM_DMABASE_CR2                    0x00000001U
+#define TIM_DMABASE_SMCR                   0x00000002U
+#define TIM_DMABASE_DIER                   0x00000003U
+#define TIM_DMABASE_SR                     0x00000004U
+#define TIM_DMABASE_EGR                    0x00000005U
+#define TIM_DMABASE_CCMR1                  0x00000006U
+#define TIM_DMABASE_CCMR2                  0x00000007U
+#define TIM_DMABASE_CCER                   0x00000008U
+#define TIM_DMABASE_CNT                    0x00000009U
+#define TIM_DMABASE_PSC                    0x0000000AU
+#define TIM_DMABASE_ARR                    0x0000000BU
+#define TIM_DMABASE_RCR                    0x0000000CU
+#define TIM_DMABASE_CCR1                   0x0000000DU
+#define TIM_DMABASE_CCR2                   0x0000000EU
+#define TIM_DMABASE_CCR3                   0x0000000FU
+#define TIM_DMABASE_CCR4                   0x00000010U
+#define TIM_DMABASE_BDTR                   0x00000011U
+#define TIM_DMABASE_DCR                    0x00000012U
+#define TIM_DMABASE_DMAR                   0x00000013U
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+  * @{
+  */
+#define TIM_EVENTSOURCE_UPDATE              TIM_EGR_UG     /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EVENTSOURCE_CC1                 TIM_EGR_CC1G   /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EVENTSOURCE_CC2                 TIM_EGR_CC2G   /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EVENTSOURCE_CC3                 TIM_EGR_CC3G   /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EVENTSOURCE_CC4                 TIM_EGR_CC4G   /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EVENTSOURCE_COM                 TIM_EGR_COMG   /*!< A commutation event is generated */
+#define TIM_EVENTSOURCE_TRIGGER             TIM_EGR_TG     /*!< A trigger event is generated */
+#define TIM_EVENTSOURCE_BREAK               TIM_EGR_BG     /*!< A break event is generated */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity
+  * @{
+  */
+#define  TIM_INPUTCHANNELPOLARITY_RISING      0x00000000U                       /*!< Polarity for TIx source */
+#define  TIM_INPUTCHANNELPOLARITY_FALLING     TIM_CCER_CC1P                     /*!< Polarity for TIx source */
+#define  TIM_INPUTCHANNELPOLARITY_BOTHEDGE    (TIM_CCER_CC1P | TIM_CCER_CC1NP)  /*!< Polarity for TIx source */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+  * @{
+  */
+#define TIM_ETRPOLARITY_INVERTED              TIM_SMCR_ETP                      /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED           0x00000000U                       /*!< Polarity for ETR source */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+  * @{
+  */
+#define TIM_ETRPRESCALER_DIV1                 0x00000000U                       /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2                 TIM_SMCR_ETPS_0                   /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4                 TIM_SMCR_ETPS_1                   /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8                 TIM_SMCR_ETPS                     /*!< ETR input source is divided by 8 */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+  * @{
+  */
+#define TIM_COUNTERMODE_UP                 0x00000000U                          /*!< Counter used as up-counter   */
+#define TIM_COUNTERMODE_DOWN               TIM_CR1_DIR                          /*!< Counter used as down-counter */
+#define TIM_COUNTERMODE_CENTERALIGNED1     TIM_CR1_CMS_0                        /*!< Center-aligned mode 1        */
+#define TIM_COUNTERMODE_CENTERALIGNED2     TIM_CR1_CMS_1                        /*!< Center-aligned mode 2        */
+#define TIM_COUNTERMODE_CENTERALIGNED3     TIM_CR1_CMS                          /*!< Center-aligned mode 3        */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+  * @{
+  */
+#define TIM_CLOCKDIVISION_DIV1             0x00000000U                          /*!< Clock division: tDTS=tCK_INT   */
+#define TIM_CLOCKDIVISION_DIV2             TIM_CR1_CKD_0                        /*!< Clock division: tDTS=2*tCK_INT */
+#define TIM_CLOCKDIVISION_DIV4             TIM_CR1_CKD_1                        /*!< Clock division: tDTS=4*tCK_INT */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+  * @{
+  */
+#define TIM_OUTPUTSTATE_DISABLE            0x00000000U                          /*!< Capture/Compare 1 output disabled */
+#define TIM_OUTPUTSTATE_ENABLE             TIM_CCER_CC1E                        /*!< Capture/Compare 1 output enabled */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
+  * @{
+  */
+#define TIM_AUTORELOAD_PRELOAD_DISABLE                0x00000000U               /*!< TIMx_ARR register is not buffered */
+#define TIM_AUTORELOAD_PRELOAD_ENABLE                 TIM_CR1_ARPE              /*!< TIMx_ARR register is buffered */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+  * @{
+  */
+#define TIM_OCFAST_DISABLE                 0x00000000U                          /*!< Output Compare fast disable */
+#define TIM_OCFAST_ENABLE                  TIM_CCMR1_OC1FE                      /*!< Output Compare fast enable  */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+  * @{
+  */
+#define TIM_OUTPUTNSTATE_DISABLE           0x00000000U                          /*!< OCxN is disabled  */
+#define TIM_OUTPUTNSTATE_ENABLE            TIM_CCER_CC1NE                       /*!< OCxN is enabled   */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+  * @{
+  */
+#define TIM_OCPOLARITY_HIGH                0x00000000U                          /*!< Capture/Compare output polarity  */
+#define TIM_OCPOLARITY_LOW                 TIM_CCER_CC1P                        /*!< Capture/Compare output polarity  */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+  * @{
+  */
+#define TIM_OCNPOLARITY_HIGH               0x00000000U                          /*!< Capture/Compare complementary output polarity */
+#define TIM_OCNPOLARITY_LOW                TIM_CCER_CC1NP                       /*!< Capture/Compare complementary output polarity */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+  * @{
+  */
+#define TIM_OCIDLESTATE_SET                TIM_CR2_OIS1                         /*!< Output Idle state: OCx=1 when MOE=0 */
+#define TIM_OCIDLESTATE_RESET              0x00000000U                          /*!< Output Idle state: OCx=0 when MOE=0 */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+  * @{
+  */
+#define TIM_OCNIDLESTATE_SET               TIM_CR2_OIS1N                        /*!< Complementary output Idle state: OCxN=1 when MOE=0 */
+#define TIM_OCNIDLESTATE_RESET             0x00000000U                          /*!< Complementary output Idle state: OCxN=0 when MOE=0 */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+  * @{
+  */
+#define  TIM_ICPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING      /*!< Capture triggered by rising edge on timer input                  */
+#define  TIM_ICPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING     /*!< Capture triggered by falling edge on timer input                 */
+#define  TIM_ICPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE    /*!< Capture triggered by both rising and falling edges on timer input*/
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity
+  * @{
+  */
+#define  TIM_ENCODERINPUTPOLARITY_RISING   TIM_INPUTCHANNELPOLARITY_RISING      /*!< Encoder input with rising edge polarity  */
+#define  TIM_ENCODERINPUTPOLARITY_FALLING  TIM_INPUTCHANNELPOLARITY_FALLING     /*!< Encoder input with falling edge polarity */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+  * @{
+  */
+#define TIM_ICSELECTION_DIRECTTI           TIM_CCMR1_CC1S_0                     /*!< TIM Input 1, 2, 3 or 4 is selected to be
+                                                                                     connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI         TIM_CCMR1_CC1S_1                     /*!< TIM Input 1, 2, 3 or 4 is selected to be
+                                                                                     connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC                TIM_CCMR1_CC1S                       /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+  * @{
+  */
+#define TIM_ICPSC_DIV1                     0x00000000U                          /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2                     TIM_CCMR1_IC1PSC_0                   /*!< Capture performed once every 2 events                                */
+#define TIM_ICPSC_DIV4                     TIM_CCMR1_IC1PSC_1                   /*!< Capture performed once every 4 events                                */
+#define TIM_ICPSC_DIV8                     TIM_CCMR1_IC1PSC                     /*!< Capture performed once every 8 events                                */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+  * @{
+  */
+#define TIM_OPMODE_SINGLE                  TIM_CR1_OPM                          /*!< Counter stops counting at the next update event */
+#define TIM_OPMODE_REPETITIVE              0x00000000U                          /*!< Counter is not stopped at update event          */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+  * @{
+  */
+#define TIM_ENCODERMODE_TI1                      TIM_SMCR_SMS_0                                                      /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level  */
+#define TIM_ENCODERMODE_TI2                      TIM_SMCR_SMS_1                                                      /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */
+#define TIM_ENCODERMODE_TI12                     (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)                                   /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Interrupt_definition TIM interrupt Definition
+  * @{
+  */
+#define TIM_IT_UPDATE                      TIM_DIER_UIE                         /*!< Update interrupt            */
+#define TIM_IT_CC1                         TIM_DIER_CC1IE                       /*!< Capture/Compare 1 interrupt */
+#define TIM_IT_CC2                         TIM_DIER_CC2IE                       /*!< Capture/Compare 2 interrupt */
+#define TIM_IT_CC3                         TIM_DIER_CC3IE                       /*!< Capture/Compare 3 interrupt */
+#define TIM_IT_CC4                         TIM_DIER_CC4IE                       /*!< Capture/Compare 4 interrupt */
+#define TIM_IT_COM                         TIM_DIER_COMIE                       /*!< Commutation interrupt       */
+#define TIM_IT_TRIGGER                     TIM_DIER_TIE                         /*!< Trigger interrupt           */
+#define TIM_IT_BREAK                       TIM_DIER_BIE                         /*!< Break interrupt             */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Commutation_Source  TIM Commutation Source
+  * @{
+  */
+#define TIM_COMMUTATION_TRGI              TIM_CR2_CCUS                          /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */
+#define TIM_COMMUTATION_SOFTWARE          0x00000000U                           /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+  * @{
+  */
+#define TIM_DMA_UPDATE                     TIM_DIER_UDE                         /*!< DMA request is triggered by the update event */
+#define TIM_DMA_CC1                        TIM_DIER_CC1DE                       /*!< DMA request is triggered by the capture/compare macth 1 event */
+#define TIM_DMA_CC2                        TIM_DIER_CC2DE                       /*!< DMA request is triggered by the capture/compare macth 2 event event */
+#define TIM_DMA_CC3                        TIM_DIER_CC3DE                       /*!< DMA request is triggered by the capture/compare macth 3 event event */
+#define TIM_DMA_CC4                        TIM_DIER_CC4DE                       /*!< DMA request is triggered by the capture/compare macth 4 event event */
+#define TIM_DMA_COM                        TIM_DIER_COMDE                       /*!< DMA request is triggered by the commutation event */
+#define TIM_DMA_TRIGGER                    TIM_DIER_TDE                         /*!< DMA request is triggered by the trigger event */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+  * @{
+  */
+#define TIM_FLAG_UPDATE                    TIM_SR_UIF                           /*!< Update interrupt flag         */
+#define TIM_FLAG_CC1                       TIM_SR_CC1IF                         /*!< Capture/Compare 1 interrupt flag */
+#define TIM_FLAG_CC2                       TIM_SR_CC2IF                         /*!< Capture/Compare 2 interrupt flag */
+#define TIM_FLAG_CC3                       TIM_SR_CC3IF                         /*!< Capture/Compare 3 interrupt flag */
+#define TIM_FLAG_CC4                       TIM_SR_CC4IF                         /*!< Capture/Compare 4 interrupt flag */
+#define TIM_FLAG_COM                       TIM_SR_COMIF                         /*!< Commutation interrupt flag    */
+#define TIM_FLAG_TRIGGER                   TIM_SR_TIF                           /*!< Trigger interrupt flag        */
+#define TIM_FLAG_BREAK                     TIM_SR_BIF                           /*!< Break interrupt flag          */
+#define TIM_FLAG_CC1OF                     TIM_SR_CC1OF                         /*!< Capture 1 overcapture flag    */
+#define TIM_FLAG_CC2OF                     TIM_SR_CC2OF                         /*!< Capture 2 overcapture flag    */
+#define TIM_FLAG_CC3OF                     TIM_SR_CC3OF                         /*!< Capture 3 overcapture flag    */
+#define TIM_FLAG_CC4OF                     TIM_SR_CC4OF                         /*!< Capture 4 overcapture flag    */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Channel TIM Channel
+  * @{
+  */
+#define TIM_CHANNEL_1                      0x00000000U                          /*!< Capture/compare channel 1 identifier      */
+#define TIM_CHANNEL_2                      0x00000004U                          /*!< Capture/compare channel 2 identifier      */
+#define TIM_CHANNEL_3                      0x00000008U                          /*!< Capture/compare channel 3 identifier      */
+#define TIM_CHANNEL_4                      0x0000000CU                          /*!< Capture/compare channel 4 identifier      */
+#define TIM_CHANNEL_ALL                    0x0000003CU                          /*!< Global Capture/compare channel identifier  */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+  * @{
+  */
+#define TIM_CLOCKSOURCE_ETRMODE2    TIM_SMCR_ETPS_1      /*!< External clock source mode 2                          */
+#define TIM_CLOCKSOURCE_INTERNAL    TIM_SMCR_ETPS_0      /*!< Internal clock source                                 */
+#define TIM_CLOCKSOURCE_ITR0        TIM_TS_ITR0          /*!< External clock source mode 1 (ITR0)                   */
+#define TIM_CLOCKSOURCE_ITR1        TIM_TS_ITR1          /*!< External clock source mode 1 (ITR1)                   */
+#define TIM_CLOCKSOURCE_ITR2        TIM_TS_ITR2          /*!< External clock source mode 1 (ITR2)                   */
+#define TIM_CLOCKSOURCE_ITR3        TIM_TS_ITR3          /*!< External clock source mode 1 (ITR3)                   */
+#define TIM_CLOCKSOURCE_TI1ED       TIM_TS_TI1F_ED       /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */
+#define TIM_CLOCKSOURCE_TI1         TIM_TS_TI1FP1        /*!< External clock source mode 1 (TTI1FP1)                */
+#define TIM_CLOCKSOURCE_TI2         TIM_TS_TI2FP2        /*!< External clock source mode 1 (TTI2FP2)                */
+#define TIM_CLOCKSOURCE_ETRMODE1    TIM_TS_ETRF          /*!< External clock source mode 1 (ETRF)                   */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+  * @{
+  */
+#define TIM_CLOCKPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED           /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED        /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING    /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING   /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE  /*!< Polarity for TIx clock sources */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+  * @{
+  */
+#define TIM_CLOCKPRESCALER_DIV1                 TIM_ETRPRESCALER_DIV1           /*!< No prescaler is used                                                     */
+#define TIM_CLOCKPRESCALER_DIV2                 TIM_ETRPRESCALER_DIV2           /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4                 TIM_ETRPRESCALER_DIV4           /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8                 TIM_ETRPRESCALER_DIV8           /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+  * @{
+  */
+#define TIM_CLEARINPUTPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED      /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED   /*!< Polarity for ETRx pin */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+  * @{
+  */
+#define TIM_CLEARINPUTPRESCALER_DIV1              TIM_ETRPRESCALER_DIV1         /*!< No prescaler is used                                                   */
+#define TIM_CLEARINPUTPRESCALER_DIV2              TIM_ETRPRESCALER_DIV2         /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4              TIM_ETRPRESCALER_DIV4         /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8              TIM_ETRPRESCALER_DIV8         /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+  * @{
+  */
+#define TIM_OSSR_ENABLE                          TIM_BDTR_OSSR                  /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer)           */
+#define TIM_OSSR_DISABLE                         0x00000000U                    /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+  * @{
+  */
+#define TIM_OSSI_ENABLE                          TIM_BDTR_OSSI                  /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer)           */
+#define TIM_OSSI_DISABLE                         0x00000000U                    /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
+/**
+  * @}
+  */
+/** @defgroup TIM_Lock_level  TIM Lock level
+  * @{
+  */
+#define TIM_LOCKLEVEL_OFF                  0x00000000U                          /*!< LOCK OFF     */
+#define TIM_LOCKLEVEL_1                    TIM_BDTR_LOCK_0                      /*!< LOCK Level 1 */
+#define TIM_LOCKLEVEL_2                    TIM_BDTR_LOCK_1                      /*!< LOCK Level 2 */
+#define TIM_LOCKLEVEL_3                    TIM_BDTR_LOCK                        /*!< LOCK Level 3 */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable
+  * @{
+  */
+#define TIM_BREAK_ENABLE                   TIM_BDTR_BKE                         /*!< Break input BRK is enabled  */
+#define TIM_BREAK_DISABLE                  0x00000000U                          /*!< Break input BRK is disabled */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+  * @{
+  */
+#define TIM_BREAKPOLARITY_LOW              0x00000000U                          /*!< Break input BRK is active low  */
+#define TIM_BREAKPOLARITY_HIGH             TIM_BDTR_BKP                         /*!< Break input BRK is active high */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+  * @{
+  */
+#define TIM_AUTOMATICOUTPUT_DISABLE        0x00000000U                          /*!< MOE can be set only by software */
+#define TIM_AUTOMATICOUTPUT_ENABLE         TIM_BDTR_AOE                         /*!< MOE can be set by software or automatically at the next update event
+                                                                                    (if none of the break inputs BRK and BRK2 is active) */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+  * @{
+  */
+#define TIM_TRGO_RESET            0x00000000U                                      /*!< TIMx_EGR.UG bit is used as trigger output (TRGO)              */
+#define TIM_TRGO_ENABLE           TIM_CR2_MMS_0                                    /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO)             */
+#define TIM_TRGO_UPDATE           TIM_CR2_MMS_1                                    /*!< Update event is used as trigger output (TRGO)                 */
+#define TIM_TRGO_OC1              (TIM_CR2_MMS_1 | TIM_CR2_MMS_0)                  /*!< Capture or a compare match 1 is used as trigger output (TRGO) */
+#define TIM_TRGO_OC1REF           TIM_CR2_MMS_2                                    /*!< OC1REF signal is used as trigger output (TRGO)                */
+#define TIM_TRGO_OC2REF           (TIM_CR2_MMS_2 | TIM_CR2_MMS_0)                  /*!< OC2REF signal is used as trigger output(TRGO)                 */
+#define TIM_TRGO_OC3REF           (TIM_CR2_MMS_2 | TIM_CR2_MMS_1)                  /*!< OC3REF signal is used as trigger output(TRGO)                 */
+#define TIM_TRGO_OC4REF           (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0)  /*!< OC4REF signal is used as trigger output(TRGO)                 */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode
+  * @{
+  */
+#define TIM_MASTERSLAVEMODE_ENABLE         TIM_SMCR_MSM                         /*!< No action */
+#define TIM_MASTERSLAVEMODE_DISABLE        0x00000000U                          /*!< Master/slave mode is selected */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Slave_Mode TIM Slave mode
+  * @{
+  */
+#define TIM_SLAVEMODE_DISABLE                0x00000000U                                        /*!< Slave mode disabled           */
+#define TIM_SLAVEMODE_RESET                  TIM_SMCR_SMS_2                                     /*!< Reset Mode                    */
+#define TIM_SLAVEMODE_GATED                  (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0)                  /*!< Gated Mode                    */
+#define TIM_SLAVEMODE_TRIGGER                (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1)                  /*!< Trigger Mode                  */
+#define TIM_SLAVEMODE_EXTERNAL1              (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1         */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes
+  * @{
+  */
+#define TIM_OCMODE_TIMING                   0x00000000U                                              /*!< Frozen                                 */
+#define TIM_OCMODE_ACTIVE                   TIM_CCMR1_OC1M_0                                         /*!< Set channel to active level on match   */
+#define TIM_OCMODE_INACTIVE                 TIM_CCMR1_OC1M_1                                         /*!< Set channel to inactive level on match */
+#define TIM_OCMODE_TOGGLE                   (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)                    /*!< Toggle                                 */
+#define TIM_OCMODE_PWM1                     (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)                    /*!< PWM mode 1                             */
+#define TIM_OCMODE_PWM2                     (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2                             */
+#define TIM_OCMODE_FORCED_ACTIVE            (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)                    /*!< Force active level                     */
+#define TIM_OCMODE_FORCED_INACTIVE          TIM_CCMR1_OC1M_2                                         /*!< Force inactive level                   */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+  * @{
+  */
+#define TIM_TS_ITR0          0x00000000U                                                       /*!< Internal Trigger 0 (ITR0)              */
+#define TIM_TS_ITR1          TIM_SMCR_TS_0                                                     /*!< Internal Trigger 1 (ITR1)              */
+#define TIM_TS_ITR2          TIM_SMCR_TS_1                                                     /*!< Internal Trigger 2 (ITR2)              */
+#define TIM_TS_ITR3          (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)                                   /*!< Internal Trigger 3 (ITR3)              */
+#define TIM_TS_TI1F_ED       TIM_SMCR_TS_2                                                     /*!< TI1 Edge Detector (TI1F_ED)            */
+#define TIM_TS_TI1FP1        (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)                                   /*!< Filtered Timer Input 1 (TI1FP1)        */
+#define TIM_TS_TI2FP2        (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)                                   /*!< Filtered Timer Input 2 (TI2FP2)        */
+#define TIM_TS_ETRF          (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2)                   /*!< Filtered External Trigger input (ETRF) */
+#define TIM_TS_NONE          0x0000FFFFU                                                       /*!< No trigger selected                    */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+  * @{
+  */
+#define TIM_TRIGGERPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED               /*!< Polarity for ETRx trigger sources             */
+#define TIM_TRIGGERPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED            /*!< Polarity for ETRx trigger sources             */
+#define TIM_TRIGGERPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING        /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING       /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE      /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+  * @{
+  */
+#define TIM_TRIGGERPRESCALER_DIV1             TIM_ETRPRESCALER_DIV1             /*!< No prescaler is used                                                       */
+#define TIM_TRIGGERPRESCALER_DIV2             TIM_ETRPRESCALER_DIV2             /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4             TIM_ETRPRESCALER_DIV4             /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8             TIM_ETRPRESCALER_DIV8             /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+  * @{
+  */
+#define TIM_TI1SELECTION_CH1               0x00000000U                          /*!< The TIMx_CH1 pin is connected to TI1 input */
+#define TIM_TI1SELECTION_XORCOMBINATION    TIM_CR2_TI1S                         /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+  * @{
+  */
+#define TIM_DMABURSTLENGTH_1TRANSFER       0x00000000U                          /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA   */
+#define TIM_DMABURSTLENGTH_2TRANSFERS      0x00000100U                          /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_3TRANSFERS      0x00000200U                          /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_4TRANSFERS      0x00000300U                          /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_5TRANSFERS      0x00000400U                          /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_6TRANSFERS      0x00000500U                          /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_7TRANSFERS      0x00000600U                          /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_8TRANSFERS      0x00000700U                          /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_9TRANSFERS      0x00000800U                          /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA  */
+#define TIM_DMABURSTLENGTH_10TRANSFERS     0x00000900U                          /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_11TRANSFERS     0x00000A00U                          /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_12TRANSFERS     0x00000B00U                          /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_13TRANSFERS     0x00000C00U                          /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_14TRANSFERS     0x00000D00U                          /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_15TRANSFERS     0x00000E00U                          /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_16TRANSFERS     0x00000F00U                          /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_17TRANSFERS     0x00001000U                          /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_18TRANSFERS     0x00001100U                          /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Handle_index TIM DMA Handle Index
+  * @{
+  */
+#define TIM_DMA_ID_UPDATE                ((uint16_t) 0x0000)       /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1                   ((uint16_t) 0x0001)       /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2                   ((uint16_t) 0x0002)       /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3                   ((uint16_t) 0x0003)       /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4                   ((uint16_t) 0x0004)       /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION           ((uint16_t) 0x0005)       /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER               ((uint16_t) 0x0006)       /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+  * @}
+  */
+
+/** @defgroup Channel_CC_State TIM Capture/Compare Channel State
+  * @{
+  */
+#define TIM_CCx_ENABLE                   0x00000001U                            /*!< Input or output channel is enabled */
+#define TIM_CCx_DISABLE                  0x00000000U                            /*!< Input or output channel is disabled */
+#define TIM_CCxN_ENABLE                  0x00000004U                            /*!< Complementary output channel is enabled */
+#define TIM_CCxN_DISABLE                 0x00000000U                            /*!< Complementary output channel is enabled */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+  * @{
+  */
+
+/** @brief  Reset TIM handle state.
+  * @param  __HANDLE__ TIM handle.
+  * @retval None
+  */
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do {                                                               \
+                                                      (__HANDLE__)->State            = HAL_TIM_STATE_RESET;         \
+                                                      (__HANDLE__)->ChannelState[0]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[1]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[2]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[3]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->DMABurstState    = HAL_DMA_BURST_STATE_RESET;   \
+                                                      (__HANDLE__)->Base_MspInitCallback         = NULL;            \
+                                                      (__HANDLE__)->Base_MspDeInitCallback       = NULL;            \
+                                                      (__HANDLE__)->IC_MspInitCallback           = NULL;            \
+                                                      (__HANDLE__)->IC_MspDeInitCallback         = NULL;            \
+                                                      (__HANDLE__)->OC_MspInitCallback           = NULL;            \
+                                                      (__HANDLE__)->OC_MspDeInitCallback         = NULL;            \
+                                                      (__HANDLE__)->PWM_MspInitCallback          = NULL;            \
+                                                      (__HANDLE__)->PWM_MspDeInitCallback        = NULL;            \
+                                                      (__HANDLE__)->OnePulse_MspInitCallback     = NULL;            \
+                                                      (__HANDLE__)->OnePulse_MspDeInitCallback   = NULL;            \
+                                                      (__HANDLE__)->Encoder_MspInitCallback      = NULL;            \
+                                                      (__HANDLE__)->Encoder_MspDeInitCallback    = NULL;            \
+                                                      (__HANDLE__)->HallSensor_MspInitCallback   = NULL;            \
+                                                      (__HANDLE__)->HallSensor_MspDeInitCallback = NULL;            \
+                                                     } while(0)
+#else
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do {                                                               \
+                                                      (__HANDLE__)->State            = HAL_TIM_STATE_RESET;         \
+                                                      (__HANDLE__)->ChannelState[0]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[1]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[2]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelState[3]  = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+                                                      (__HANDLE__)->DMABurstState    = HAL_DMA_BURST_STATE_RESET;   \
+                                                     } while(0)
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the TIM peripheral.
+  * @param  __HANDLE__ TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+  * @brief  Enable the TIM main Output.
+  * @param  __HANDLE__ TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__)             ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+  * @brief  Disable the TIM peripheral.
+  * @param  __HANDLE__ TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+  do { \
+    if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
+    { \
+      if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
+      { \
+        (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+      } \
+    } \
+  } while(0)
+
+/**
+  * @brief  Disable the TIM main Output.
+  * @param  __HANDLE__ TIM handle
+  * @retval None
+  * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+  */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+  do { \
+    if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
+    { \
+      if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
+      { \
+        (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+      } \
+    } \
+  } while(0)
+
+/**
+  * @brief  Disable the TIM main Output.
+  * @param  __HANDLE__ TIM handle
+  * @retval None
+  * @note The Main Output Enable of a timer instance is disabled unconditionally
+  */
+#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__)  (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
+
+/** @brief  Enable the specified TIM interrupt.
+  * @param  __HANDLE__ specifies the TIM Handle.
+  * @param  __INTERRUPT__ specifies the TIM interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_IT_UPDATE: Update interrupt
+  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
+  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
+  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
+  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
+  *            @arg TIM_IT_COM:   Commutation interrupt
+  *            @arg TIM_IT_TRIGGER: Trigger interrupt
+  *            @arg TIM_IT_BREAK: Break interrupt
+  * @retval None
+  */
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+
+/** @brief  Disable the specified TIM interrupt.
+  * @param  __HANDLE__ specifies the TIM Handle.
+  * @param  __INTERRUPT__ specifies the TIM interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_IT_UPDATE: Update interrupt
+  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
+  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
+  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
+  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
+  *            @arg TIM_IT_COM:   Commutation interrupt
+  *            @arg TIM_IT_TRIGGER: Trigger interrupt
+  *            @arg TIM_IT_BREAK: Break interrupt
+  * @retval None
+  */
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+
+/** @brief  Enable the specified DMA request.
+  * @param  __HANDLE__ specifies the TIM Handle.
+  * @param  __DMA__ specifies the TIM DMA request to enable.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: Update DMA request
+  *            @arg TIM_DMA_CC1:   Capture/Compare 1 DMA request
+  *            @arg TIM_DMA_CC2:  Capture/Compare 2 DMA request
+  *            @arg TIM_DMA_CC3:  Capture/Compare 3 DMA request
+  *            @arg TIM_DMA_CC4:  Capture/Compare 4 DMA request
+  *            @arg TIM_DMA_COM:   Commutation DMA request
+  *            @arg TIM_DMA_TRIGGER: Trigger DMA request
+  * @retval None
+  */
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__)         ((__HANDLE__)->Instance->DIER |= (__DMA__))
+
+/** @brief  Disable the specified DMA request.
+  * @param  __HANDLE__ specifies the TIM Handle.
+  * @param  __DMA__ specifies the TIM DMA request to disable.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: Update DMA request
+  *            @arg TIM_DMA_CC1:   Capture/Compare 1 DMA request
+  *            @arg TIM_DMA_CC2:  Capture/Compare 2 DMA request
+  *            @arg TIM_DMA_CC3:  Capture/Compare 3 DMA request
+  *            @arg TIM_DMA_CC4:  Capture/Compare 4 DMA request
+  *            @arg TIM_DMA_COM:   Commutation DMA request
+  *            @arg TIM_DMA_TRIGGER: Trigger DMA request
+  * @retval None
+  */
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__)        ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+
+/** @brief  Check whether the specified TIM interrupt flag is set or not.
+  * @param  __HANDLE__ specifies the TIM Handle.
+  * @param  __FLAG__ specifies the TIM interrupt flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg TIM_FLAG_UPDATE: Update interrupt flag
+  *            @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+  *            @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+  *            @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+  *            @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+  *            @arg TIM_FLAG_COM:  Commutation interrupt flag
+  *            @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+  *            @arg TIM_FLAG_BREAK: Break interrupt flag
+  *            @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+  *            @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+  *            @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+  *            @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__)          (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the specified TIM interrupt flag.
+  * @param  __HANDLE__ specifies the TIM Handle.
+  * @param  __FLAG__ specifies the TIM interrupt flag to clear.
+  *        This parameter can be one of the following values:
+  *            @arg TIM_FLAG_UPDATE: Update interrupt flag
+  *            @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+  *            @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+  *            @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+  *            @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+  *            @arg TIM_FLAG_COM:  Commutation interrupt flag
+  *            @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+  *            @arg TIM_FLAG_BREAK: Break interrupt flag
+  *            @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+  *            @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+  *            @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+  *            @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/**
+  * @brief  Check whether the specified TIM interrupt source is enabled or not.
+  * @param  __HANDLE__ TIM handle
+  * @param  __INTERRUPT__ specifies the TIM interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_IT_UPDATE: Update interrupt
+  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
+  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
+  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
+  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
+  *            @arg TIM_IT_COM:   Commutation interrupt
+  *            @arg TIM_IT_TRIGGER: Trigger interrupt
+  *            @arg TIM_IT_BREAK: Break interrupt
+  * @retval The state of TIM_IT (SET or RESET).
+  */
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \
+                                                             == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Clear the TIM interrupt pending bits.
+  * @param  __HANDLE__ TIM handle
+  * @param  __INTERRUPT__ specifies the interrupt pending bit to clear.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_IT_UPDATE: Update interrupt
+  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
+  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
+  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
+  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
+  *            @arg TIM_IT_COM:   Commutation interrupt
+  *            @arg TIM_IT_TRIGGER: Trigger interrupt
+  *            @arg TIM_IT_BREAK: Break interrupt
+  * @retval None
+  */
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+  * @brief  Indicates whether or not the TIM Counter is used as downcounter.
+  * @param  __HANDLE__ TIM handle.
+  * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
+  * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
+mode.
+  */
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__)    (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+
+/**
+  * @brief  Set the TIM Prescaler on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __PRESC__ specifies the Prescaler new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__)       ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+/**
+  * @brief  Set the TIM Counter Register value on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __COUNTER__ specifies the Counter register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__)  ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+  * @brief  Get the TIM Counter Register value on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
+  */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__)  ((__HANDLE__)->Instance->CNT)
+
+/**
+  * @brief  Set the TIM Autoreload Register value on runtime without calling another time any Init function.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __AUTORELOAD__ specifies the Counter register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+  do{                                                    \
+    (__HANDLE__)->Instance->ARR = (__AUTORELOAD__);  \
+    (__HANDLE__)->Init.Period = (__AUTORELOAD__);    \
+  } while(0)
+
+/**
+  * @brief  Get the TIM Autoreload Register value on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
+  */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__)  ((__HANDLE__)->Instance->ARR)
+
+/**
+  * @brief  Set the TIM Clock Division value on runtime without calling another time any Init function.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CKD__ specifies the clock division value.
+  *          This parameter can be one of the following value:
+  *            @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+  *            @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+  *            @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+  * @retval None
+  */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+  do{                                                   \
+    (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD);  \
+    (__HANDLE__)->Instance->CR1 |= (__CKD__);       \
+    (__HANDLE__)->Init.ClockDivision = (__CKD__);   \
+  } while(0)
+
+/**
+  * @brief  Get the TIM Clock Division value on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @retval The clock division can be one of the following values:
+  *            @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+  *            @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+  *            @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+  */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__)  ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+  * @brief  Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __ICPSC__ specifies the Input Capture4 prescaler new value.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPSC_DIV1: no prescaler
+  *            @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *            @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *            @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  * @retval None
+  */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+  do{                                                    \
+    TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__));  \
+    TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+  } while(0)
+
+/**
+  * @brief  Get the TIM Input Capture prescaler on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+  *            @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+  *            @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+  *            @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+  * @retval The input capture prescaler can be one of the following values:
+  *            @arg TIM_ICPSC_DIV1: no prescaler
+  *            @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *            @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *            @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__)  \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+   (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
+
+/**
+  * @brief  Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __COMPARE__ specifies the Capture Compare register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+   ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)))
+
+/**
+  * @brief  Get the TIM Capture Compare Register value on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channel associated with the capture compare register
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get capture/compare 1 register value
+  *            @arg TIM_CHANNEL_2: get capture/compare 2 register value
+  *            @arg TIM_CHANNEL_3: get capture/compare 3 register value
+  *            @arg TIM_CHANNEL_4: get capture/compare 4 register value
+  * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)
+  */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+   ((__HANDLE__)->Instance->CCR4))
+
+/**
+  * @brief  Set the TIM Output compare preload.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval None
+  */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__)    \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+   ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE))
+
+/**
+  * @brief  Reset the TIM Output compare preload.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval None
+  */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__)    \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\
+   ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE))
+
+/**
+  * @brief  Enable fast mode for a given channel.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @note  When fast mode is enabled an active edge on the trigger input acts
+  *        like a compare match on CCx output. Delay to sample the trigger
+  *        input and to activate CCx output is reduced to 3 clock cycles.
+  * @note  Fast mode acts only if the channel is configured in PWM1 or PWM2 mode.
+  * @retval None
+  */
+#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__)    \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\
+   ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE))
+
+/**
+  * @brief  Disable fast mode for a given channel.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @note  When fast mode is disabled CCx output behaves normally depending
+  *        on counter and CCRx values even when the trigger is ON. The minimum
+  *        delay to activate CCx output when an active edge occurs on the
+  *        trigger input is 5 clock cycles.
+  * @retval None
+  */
+#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__)    \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\
+   ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE))
+
+/**
+  * @brief  Set the Update Request Source (URS) bit of the TIMx_CR1 register.
+  * @param  __HANDLE__ TIM handle.
+  * @note  When the URS bit of the TIMx_CR1 register is set, only counter
+  *        overflow/underflow generates an update interrupt or DMA request (if
+  *        enabled)
+  * @retval None
+  */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS)
+
+/**
+  * @brief  Reset the Update Request Source (URS) bit of the TIMx_CR1 register.
+  * @param  __HANDLE__ TIM handle.
+  * @note  When the URS bit of the TIMx_CR1 register is reset, any of the
+  *        following events generate an update interrupt or DMA request (if
+  *        enabled):
+  *           _ Counter overflow underflow
+  *           _ Setting the UG bit
+  *           _ Update generation through the slave mode controller
+  * @retval None
+  */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)
+
+/**
+  * @brief  Set the TIM Capture x input polarity on runtime.
+  * @param  __HANDLE__ TIM handle.
+  * @param  __CHANNEL__ TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __POLARITY__ Polarity for TIx source
+  *            @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+  *            @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+  *            @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+  * @retval None
+  */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__)    \
+  do{                                                                     \
+    TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__));               \
+    TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+  }while(0)
+
+/**
+  * @}
+  */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Constants TIM Private Constants
+  * @{
+  */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+   channels have been disabled */
+#define TIM_CCER_CCxE_MASK  ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+  * @}
+  */
+/* End of private constants --------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+  * @{
+  */
+#define IS_TIM_CLEARINPUT_SOURCE(__MODE__)  (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)      || \
+                                             ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)       || \
+                                             ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR))
+
+#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1)   || \
+                                   ((__BASE__) == TIM_DMABASE_CR2)   || \
+                                   ((__BASE__) == TIM_DMABASE_SMCR)  || \
+                                   ((__BASE__) == TIM_DMABASE_DIER)  || \
+                                   ((__BASE__) == TIM_DMABASE_SR)    || \
+                                   ((__BASE__) == TIM_DMABASE_EGR)   || \
+                                   ((__BASE__) == TIM_DMABASE_CCMR1) || \
+                                   ((__BASE__) == TIM_DMABASE_CCMR2) || \
+                                   ((__BASE__) == TIM_DMABASE_CCER)  || \
+                                   ((__BASE__) == TIM_DMABASE_CNT)   || \
+                                   ((__BASE__) == TIM_DMABASE_PSC)   || \
+                                   ((__BASE__) == TIM_DMABASE_ARR)   || \
+                                   ((__BASE__) == TIM_DMABASE_RCR)   || \
+                                   ((__BASE__) == TIM_DMABASE_CCR1)  || \
+                                   ((__BASE__) == TIM_DMABASE_CCR2)  || \
+                                   ((__BASE__) == TIM_DMABASE_CCR3)  || \
+                                   ((__BASE__) == TIM_DMABASE_CCR4)  || \
+                                   ((__BASE__) == TIM_DMABASE_BDTR))
+
+#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_COUNTER_MODE(__MODE__)      (((__MODE__) == TIM_COUNTERMODE_UP)              || \
+                                            ((__MODE__) == TIM_COUNTERMODE_DOWN)            || \
+                                            ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1)  || \
+                                            ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2)  || \
+                                            ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(__DIV__)  (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
+                                            ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
+                                            ((__DIV__) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
+                                            ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
+
+#define IS_TIM_FAST_STATE(__STATE__)       (((__STATE__) == TIM_OCFAST_DISABLE) || \
+                                            ((__STATE__) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(__POLARITY__)   (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
+                                            ((__POLARITY__) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(__POLARITY__)  (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
+                                            ((__POLARITY__) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(__STATE__)     (((__STATE__) == TIM_OCIDLESTATE_SET) || \
+                                            ((__STATE__) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(__STATE__)    (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
+                                            ((__STATE__) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__)   (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING)   || \
+                                                      ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING))
+
+#define IS_TIM_IC_POLARITY(__POLARITY__)   (((__POLARITY__) == TIM_ICPOLARITY_RISING)   || \
+                                            ((__POLARITY__) == TIM_ICPOLARITY_FALLING)  || \
+                                            ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
+                                            ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
+                                            ((__SELECTION__) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
+                                            ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
+                                            ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
+                                            ((__PRESCALER__) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(__MODE__)          (((__MODE__) == TIM_OPMODE_SINGLE) || \
+                                            ((__MODE__) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(__MODE__)      (((__MODE__) == TIM_ENCODERMODE_TI1) || \
+                                            ((__MODE__) == TIM_ENCODERMODE_TI2) || \
+                                            ((__MODE__) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_CHANNELS(__CHANNEL__)       (((__CHANNEL__) == TIM_CHANNEL_1) || \
+                                            ((__CHANNEL__) == TIM_CHANNEL_2) || \
+                                            ((__CHANNEL__) == TIM_CHANNEL_3) || \
+                                            ((__CHANNEL__) == TIM_CHANNEL_4) || \
+                                            ((__CHANNEL__) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(__CHANNEL__)   (((__CHANNEL__) == TIM_CHANNEL_1) || \
+                                            ((__CHANNEL__) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
+                                                    ((__CHANNEL__) == TIM_CHANNEL_2) || \
+                                                    ((__CHANNEL__) == TIM_CHANNEL_3))
+
+#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED)    || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI1)      || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI2)      || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED)    || \
+                                            ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+                                            ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING)      || \
+                                            ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING)     || \
+                                            ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
+                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
+                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
+                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(__ICFILTER__)      ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+                                                  ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+                                                    ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+                                                    ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+                                                    ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_OSSR_STATE(__STATE__)       (((__STATE__) == TIM_OSSR_ENABLE) || \
+                                            ((__STATE__) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(__STATE__)       (((__STATE__) == TIM_OSSI_ENABLE) || \
+                                            ((__STATE__) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(__LEVEL__)       (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
+                                            ((__LEVEL__) == TIM_LOCKLEVEL_1)   || \
+                                            ((__LEVEL__) == TIM_LOCKLEVEL_2)   || \
+                                            ((__LEVEL__) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL)
+
+
+#define IS_TIM_BREAK_STATE(__STATE__)      (((__STATE__) == TIM_BREAK_ENABLE) || \
+                                            ((__STATE__) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
+                                             ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+                                                  ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET)  || \
+                                        ((__SOURCE__) == TIM_TRGO_ENABLE) || \
+                                        ((__SOURCE__) == TIM_TRGO_UPDATE) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC1)    || \
+                                        ((__SOURCE__) == TIM_TRGO_OC1REF) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC2REF) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC3REF) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_MSM_STATE(__STATE__)      (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
+                                          ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE)   || \
+                                     ((__MODE__) == TIM_SLAVEMODE_RESET)     || \
+                                     ((__MODE__) == TIM_SLAVEMODE_GATED)     || \
+                                     ((__MODE__) == TIM_SLAVEMODE_TRIGGER)   || \
+                                     ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1)               || \
+                                   ((__MODE__) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(__MODE__)  (((__MODE__) == TIM_OCMODE_TIMING)             || \
+                                   ((__MODE__) == TIM_OCMODE_ACTIVE)             || \
+                                   ((__MODE__) == TIM_OCMODE_INACTIVE)           || \
+                                   ((__MODE__) == TIM_OCMODE_TOGGLE)             || \
+                                   ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE)      || \
+                                   ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+                                                 ((__SELECTION__) == TIM_TS_ITR1) || \
+                                                 ((__SELECTION__) == TIM_TS_ITR2) || \
+                                                 ((__SELECTION__) == TIM_TS_ITR3) || \
+                                                 ((__SELECTION__) == TIM_TS_TI1F_ED) || \
+                                                 ((__SELECTION__) == TIM_TS_TI1FP1) || \
+                                                 ((__SELECTION__) == TIM_TS_TI2FP2) || \
+                                                 ((__SELECTION__) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+                                                               ((__SELECTION__) == TIM_TS_ITR1) || \
+                                                               ((__SELECTION__) == TIM_TS_ITR2) || \
+                                                               ((__SELECTION__) == TIM_TS_ITR3) || \
+                                                               ((__SELECTION__) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(__POLARITY__)   (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED   ) || \
+                                                ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+                                                ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING     ) || \
+                                                ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING    ) || \
+                                                ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE   ))
+
+#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
+                                                ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
+                                                ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
+                                                ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_TI1SELECTION(__TI1SELECTION__)  (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
+                                                ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_LENGTH(__LENGTH__)      (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER)   || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS)  || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+                                            ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U))
+
+#define IS_TIM_IC_FILTER(__ICFILTER__)   ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_DEADTIME(__DEADTIME__)    ((__DEADTIME__) <= 0xFFU)
+
+#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER)
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+   ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
+   ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
+   ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U))))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+   ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
+
+#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\
+   (__HANDLE__)->ChannelState[3])
+
+#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\
+   ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)))
+
+#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__,  __CHANNEL_STATE__) do { \
+  (__HANDLE__)->ChannelState[0]  = (__CHANNEL_STATE__);  \
+  (__HANDLE__)->ChannelState[1]  = (__CHANNEL_STATE__);  \
+  (__HANDLE__)->ChannelState[2]  = (__CHANNEL_STATE__);  \
+  (__HANDLE__)->ChannelState[3]  = (__CHANNEL_STATE__);  \
+ } while(0)
+
+#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\
+   (__HANDLE__)->ChannelNState[3])
+
+#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\
+   ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__)))
+
+#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__,  __CHANNEL_STATE__) do { \
+  (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__);  \
+  (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__);  \
+  (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__);  \
+  (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__);  \
+ } while(0)
+
+/**
+  * @}
+  */
+/* End of private macros -----------------------------------------------------*/
+
+/* Include TIM HAL Extended module */
+#include "stm32f0xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions TIM Exported Functions
+  * @{
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions
+  *  @brief   Time Base functions
+  * @{
+  */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions
+  *  @brief   TIM Output Compare functions
+  * @{
+  */
+/* Timer Output Compare functions *********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions
+  *  @brief   TIM PWM functions
+  * @{
+  */
+/* Timer PWM functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions
+  *  @brief   TIM Input Capture functions
+  * @{
+  */
+/* Timer Input Capture functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions
+  *  @brief   TIM One Pulse functions
+  * @{
+  */
+/* Timer One Pulse functions **************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions
+  *  @brief   TIM Encoder functions
+  * @{
+  */
+/* Timer Encoder functions ****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
+                                            uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+  *  @brief   IRQ handler management
+  * @{
+  */
+/* Interrupt Handler functions  ***********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions
+  *  @brief   Peripheral Control functions
+  * @{
+  */
+/* Control functions  *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
+                                                 uint32_t OutputChannel,  uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig,
+                                           uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                              uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                                   uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
+                                                   uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                             uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                                  uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength,
+                                                  uint32_t  DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+  *  @brief   TIM Callbacks functions
+  * @{
+  */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
+                                           pTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions
+  *  @brief  Peripheral State functions
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/* Peripheral Channel state functions  ************************************************/
+HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim,  uint32_t Channel);
+HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+  * @{
+  */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
+                       uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+void TIM_ResetCallback(TIM_HandleTypeDef *htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+/* End of private functions --------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h
new file mode 100644
index 0000000..23f6642
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h
@@ -0,0 +1,268 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of TIM HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_TIM_EX_H
+#define STM32F0xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+  * @{
+  */
+
+/**
+  * @brief  TIM Hall sensor Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t IC1Polarity;         /*!< Specifies the active edge of the input signal.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t Commutation_Delay;   /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+/**
+  * @}
+  */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+  * @{
+  */
+#define TIM_TIM14_GPIO                         (0x00000000U) /*!< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC                          (0x00000001U) /*!< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE                          (0x00000002U) /*!< TIM14 TI1 is connected to HSE/32U */
+#define TIM_TIM14_MCO                          (0x00000003U) /*!< TIM14 TI1 is connected to MCO */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* End of exported macro -----------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
+  * @{
+  */
+#define IS_TIM_REMAP(__INSTANCE__, __REMAP__)                                        \
+  (((__INSTANCE__) == TIM14)  && (((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))
+
+/**
+  * @}
+  */
+/* End of private macro ------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+  *  @brief    Timer Hall Sensor functions
+  * @{
+  */
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+  *  @brief   Timer Complementary Output Compare functions
+  * @{
+  */
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+  *  @brief    Timer Complementary PWM functions
+  * @{
+  */
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+  *  @brief    Timer Complementary One Pulse functions
+  * @{
+  */
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+  *  @brief    Peripheral Control functions
+  * @{
+  */
+/* Extended Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                              uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                 uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                  uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+                                                        TIM_MasterConfigTypeDef *sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+                                                TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+  * @brief    Extended Callbacks functions
+  * @{
+  */
+/* Extended Callback **********************************************************/
+void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+  * @brief    Extended Peripheral State functions
+  * @{
+  */
+/* Extended Peripheral State functions  ***************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim,  uint32_t ChannelN);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
+  * @{
+  */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/* End of private functions --------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c
new file mode 100644
index 0000000..94a482a
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c
@@ -0,0 +1,514 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal.c
+  * @author  MCD Application Team
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL. 
+    [..]
+    The HAL contains two APIs categories:
+         (+) HAL Initialization and de-initialization functions
+         (+) HAL Control functions
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL HAL
+  * @brief HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+/** 
+  * @brief STM32F0xx HAL Driver version number V1.7.5
+  */
+#define __STM32F0xx_HAL_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32F0xx_HAL_VERSION_SUB1   (0x07) /*!< [23:16] sub1 version */
+#define __STM32F0xx_HAL_VERSION_SUB2   (0x05) /*!< [15:8]  sub2 version */
+#define __STM32F0xx_HAL_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F0xx_HAL_VERSION         ((__STM32F0xx_HAL_VERSION_MAIN << 24U)\
+                                        |(__STM32F0xx_HAL_VERSION_SUB1 << 16U)\
+                                        |(__STM32F0xx_HAL_VERSION_SUB2 << 8U )\
+                                        |(__STM32F0xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK    (0x00000FFFU)
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup HAL_Private_Macros HAL Private Macros
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Exported Variables
+  * @{
+  */
+__IO uint32_t uwTick;
+uint32_t uwTickPrio   = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
+HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT;  /* 1KHz */
+/**
+  * @}
+  */
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions 
+  * @brief    Initialization and de-initialization functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+   [..]  This section provides functions allowing to:
+      (+) Initializes the Flash interface, the NVIC allocation and initial clock 
+          configuration. It initializes the systick also when timeout is needed
+          and the backup domain when enabled.
+      (+) de-Initializes common part of the HAL.
+      (+) Configure The time base source to have 1ms time base with a dedicated
+          Tick interrupt priority.
+        (++) SysTick timer is used by default as source of time base, but user
+             can eventually implement his proper time base source (a general purpose 
+             timer for example or other time source), keeping in mind that Time base 
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically 
+             at the beginning of the program after reset by HAL_Init() or at any time 
+             when clock is configured, by HAL_RCC_ClockConfig(). 
+        (++) Source of time base is configured  to generate interrupts at regular 
+             time intervals. Care must be taken if HAL_Delay() is called from a 
+             peripheral ISR process, the Tick interrupt line must have higher priority 
+            (numerically lower) than the peripheral interrupt. Otherwise the caller 
+            ISR process will be blocked. 
+       (++) functions affecting time base configurations are declared as __Weak  
+             to make  override possible  in case of other  implementations in user file.
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function configures the Flash prefetch,
+  *        Configures time base source, NVIC and Low level hardware
+  * @note This function is called at the beginning of program after reset and before 
+  *       the clock configuration
+  * @note The time base configuration is based on HSI clock when exiting from Reset.
+  *       Once done, time base tick start incrementing.
+  *       In the default implementation,Systick is used as source of time base.
+  *       The tick variable is incremented each 1ms in its ISR.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  /* Configure Flash prefetch */ 
+#if (PREFETCH_ENABLE != 0)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+
+  HAL_InitTick(TICK_INT_PRIORITY);
+
+  /* Init the low level hardware */
+  HAL_MspInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief This function de-Initialize common part of the HAL and stops the SysTick
+  *        of time base.
+  * @note This function is optional.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+  __HAL_RCC_APB1_FORCE_RESET();
+  __HAL_RCC_APB1_RELEASE_RESET();
+
+  __HAL_RCC_APB2_FORCE_RESET();
+  __HAL_RCC_APB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB_FORCE_RESET();
+  __HAL_RCC_AHB_RELEASE_RESET();
+
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+    
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief This function configures the source of the time base. 
+  *        The time source is configured  to have 1ms time base with a dedicated 
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig(). 
+  * @note In the default implementation, SysTick timer is the source of time base. 
+  *       It is used to generate interrupts at regular time intervals. 
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process, 
+  *       The SysTick interrupt must have higher priority (numerically lower) 
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __Weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  /*Configure the SysTick to have interrupt in 1ms time basis*/
+  if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Configure the SysTick IRQ priority */
+  if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+  {
+    HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
+    uwTickPrio = TickPriority;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+   /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions 
+  * @brief    HAL Control functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+      (+) Enable/Disable Debug module during Sleep mode
+      (+) Enable/Disable Debug module during STOP mode
+      (+) Enable/Disable Debug module during STANDBY mode
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment  a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in SysTick ISR.
+  * @note This function is declared as __weak to be overwritten in case of other 
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick += uwTickFreq;
+}
+
+/**
+  * @brief  Provides a tick value in millisecond.
+  * @note   This function is declared as __weak  to be overwritten  in case of other 
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+  return uwTick;
+}
+
+/**
+  * @brief This function returns a tick priority.
+  * @retval tick priority
+  */
+uint32_t HAL_GetTickPrio(void)
+{
+  return uwTickPrio;
+}
+
+/**
+  * @brief Set new tick Freq.
+  * @retval status
+  */
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
+{
+  HAL_StatusTypeDef status  = HAL_OK;
+  HAL_TickFreqTypeDef prevTickFreq;
+
+  assert_param(IS_TICKFREQ(Freq));
+
+  if (uwTickFreq != Freq)
+  {
+    /* Back up uwTickFreq frequency */
+    prevTickFreq = uwTickFreq;
+
+    /* Update uwTickFreq global variable used by HAL_InitTick() */
+    uwTickFreq = Freq;
+
+    /* Apply the new tick Freq */
+    status = HAL_InitTick(uwTickPrio);
+
+    if (status != HAL_OK)
+    {
+      /* Restore previous tick frequency */
+      uwTickFreq = prevTickFreq;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief return tick frequency.
+  * @retval tick period in Hz
+  */
+HAL_TickFreqTypeDef HAL_GetTickFreq(void)
+{
+  return uwTickFreq;
+}
+
+/**
+  * @brief This function provides accurate delay (in milliseconds) based 
+  *        on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note ThiS function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(uint32_t Delay)
+{
+  uint32_t tickstart = HAL_GetTick();
+  uint32_t wait = Delay;
+  
+  /* Add a freq to guarantee minimum wait */
+  if (wait < HAL_MAX_DELAY)
+  {
+    wait += (uint32_t)(uwTickFreq);
+  }
+  
+  while((HAL_GetTick() - tickstart) < wait)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the the SysTick interrupt will be disabled and so Tick increment 
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+
+{
+  /* Disable SysTick Interrupt */
+  CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the the SysTick interrupt will be enabled and so Tick increment 
+  *       is resumed.
+  * @note This function is declared as __weak  to be overwritten  in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+  /* Enable SysTick Interrupt */
+  SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  This method returns the HAL revision
+  * @retval version 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F0xx_HAL_VERSION;
+}
+
+/**
+  * @brief  Returns the device revision identifier.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+   return((DBGMCU->IDCODE) >> 16U);
+}
+
+/**
+  * @brief  Returns the device identifier.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+   return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+  * @brief  Returns first word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw0(void)
+{
+   return(READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+  * @brief  Returns second word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw1(void)
+{
+   return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+  * @brief  Returns third word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw2(void)
+{
+   return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+/**
+  * @brief  Enable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c
new file mode 100644
index 0000000..cbe3f5b
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c
@@ -0,0 +1,341 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_cortex.c
+  * @author  MCD Application Team
+  * @brief   CORTEX HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the CORTEX:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions 
+  *
+  *  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+
+    [..]  
+    *** How to configure Interrupts using CORTEX HAL driver ***
+    ===========================================================
+    [..]
+    This section provides functions allowing to configure the NVIC interrupts (IRQ).
+    The Cortex-M0 exceptions are managed by CMSIS functions.
+      (#) Enable and Configure the priority of the selected IRQ Channels. 
+             The priority can be 0..3. 
+
+        -@- Lower priority values gives higher priority.
+        -@- Priority Order:
+            (#@) Lowest priority.
+            (#@) Lowest hardware priority (IRQn position).  
+
+      (#)  Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
+
+      (#)  Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
+      
+      -@-  Negative value of IRQn_Type are not allowed.
+
+
+    [..]
+    *** How to configure Systick using CORTEX HAL driver ***
+    ========================================================
+    [..]
+    Setup SysTick Timer for time base. 
+           
+   (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
+       is a CMSIS function that:
+        (++) Configures the SysTick Reload register with value passed as function parameter.
+        (++) Configures the SysTick IRQ priority to the lowest value (0x03).
+        (++) Resets the SysTick Counter register.
+        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+        (++) Enables the SysTick Interrupt.
+        (++) Starts the SysTick Counter.
+    
+   (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+       HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+       HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined
+       inside the stm32f0xx_hal_cortex.h file.
+
+   (+) You can change the SysTick IRQ priority by calling the
+       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function 
+       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+   (+) To adjust the SysTick time base, use the following formula:
+
+       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
+       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+       (++) Reload Value should not exceed 0xFFFFFF
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX CORTEX
+  * @brief CORTEX CORTEX HAL module driver
+  * @{
+  */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]
+      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+      Systick functionalities 
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets the priority of an interrupt.
+  * @param  IRQn External interrupt number .
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to stm32f0xx.h file)
+  * @param  PreemptPriority The preemption priority for the IRQn channel.
+  *         This parameter can be a value between 0 and 3.
+  *         A lower priority value indicates a higher priority
+  * @param  SubPriority the subpriority level for the IRQ channel.
+  *         with stm32f0xx devices, this parameter is a dummy value and it is ignored, because 
+  *         no subpriority supported in Cortex M0 based products.   
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{ 
+  /* Check the parameters */
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+  NVIC_SetPriority(IRQn,PreemptPriority);
+}
+
+/**
+  * @brief  Enables a device specific interrupt in the NVIC interrupt controller.
+  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+  *         function should be called before. 
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Enable interrupt */
+  NVIC_EnableIRQ(IRQn);
+}
+
+/**
+  * @brief  Disables a device specific interrupt in the NVIC interrupt controller.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Disable interrupt */
+  NVIC_DisableIRQ(IRQn);
+}
+
+/**
+  * @brief  Initiates a system reset request to reset the MCU.
+  * @retval None
+  */
+void HAL_NVIC_SystemReset(void)
+{
+  /* System Reset */
+  NVIC_SystemReset();
+}
+
+/**
+  * @brief  Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+  *         Counter is in free running mode to generate periodic interrupts.
+  * @param  TicksNumb Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+   return SysTick_Config(TicksNumb);
+}
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions 
+ *  @brief   Cortex control functions
+ *
+@verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+    [..]
+      This subsection provides a set of functions allowing to control the CORTEX
+      (NVIC, SYSTICK) functionalities.
+
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Gets the priority of an interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
+{
+  /* Get priority for Cortex-M system or device specific interrupts */
+  return NVIC_GetPriority(IRQn);
+}
+
+/**
+  * @brief  Sets Pending bit of an external interrupt.
+  * @param  IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Set interrupt pending */
+  NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Gets Pending Interrupt (reads the pending register in the NVIC
+  *         and returns the pending bit for the specified interrupt).
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Return 1 if pending else 0 */
+  return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Clears the pending bit of an external interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Clear pending interrupt */
+  NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Configures the SysTick clock source.
+  * @param  CLKSource specifies the SysTick clock source.
+  *         This parameter can be one of the following values:
+  *             @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+  *             @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+  if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+  {
+    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+  }
+}
+
+/**
+  * @brief  This function handles SYSTICK interrupt request.
+  * @retval None
+  */
+void HAL_SYSTICK_IRQHandler(void)
+{
+  HAL_SYSTICK_Callback();
+}
+
+/**
+  * @brief  SYSTICK callback.
+  * @retval None
+  */
+__weak void HAL_SYSTICK_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SYSTICK_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c
new file mode 100644
index 0000000..b7f91a4
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c
@@ -0,0 +1,901 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_dma.c
+  * @author  MCD Application Team
+  * @brief   DMA HAL module driver.
+  *    
+  *         This file provides firmware functions to manage the following 
+  *         functionalities of the Direct Memory Access (DMA) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and errors functions
+  @verbatim     
+  ==============================================================================      
+                        ##### How to use this driver #####
+  ============================================================================== 
+  [..]
+   (#) Enable and configure the peripheral to be connected to the DMA Channel
+       (except for internal SRAM / FLASH memories: no initialization is 
+       necessary). Please refer to Reference manual for connection between peripherals
+       and DMA requests .
+
+   (#) For a given Channel, program the required configuration through the following parameters:   
+       Transfer Direction, Source and Destination data formats, 
+       Circular or Normal mode, Channel Priority level, Source and Destination Increment mode, 
+       using HAL_DMA_Init() function.
+
+   (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error 
+       detection.
+                    
+   (#) Use HAL_DMA_Abort() function to abort the current transfer
+                   
+     -@-   In Memory-to-Memory transfer mode, Circular mode is not allowed.
+     *** Polling mode IO operation ***
+     =================================   
+    [..] 
+      (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source 
+          address and destination address and the Length of data to be transferred
+      (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this  
+          case a fixed Timeout can be configured by User depending from his application.
+
+     *** Interrupt mode IO operation ***    
+     =================================== 
+    [..]
+      (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+      (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() 
+      (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of  
+          Source address and destination address and the Length of data to be transferred. 
+          In this case the DMA interrupt is configured 
+      (+) Use HAL_DMA_Channel_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+      (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can 
+          add his own function by customization of function pointer XferCpltCallback and 
+          XferErrorCallback (i.e a member of DMA handle structure). 
+
+     *** DMA HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in DMA HAL driver.
+
+     [..] 
+      (@) You can refer to the DMA HAL driver header file for more useful macros  
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+
+/** @defgroup DMA DMA
+  * @brief DMA HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+  * @{
+  */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+  * @{
+  */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief   Initialization and de-initialization functions 
+ *
+@verbatim   
+ ===============================================================================
+             ##### Initialization and de-initialization functions  #####
+ ===============================================================================  
+    [..]
+    This section provides functions allowing to initialize the DMA Channel source
+    and destination addresses, incrementation and data sizes, transfer direction, 
+    circular/normal mode selection, memory-to-memory mode selection and Channel priority value.
+    [..]
+    The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+    reference manual.  
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initialize the DMA according to the specified
+  *         parameters in the DMA_InitTypeDef and initialize the associated handle.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Channel.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{ 
+  uint32_t tmp = 0U;
+  
+  /* Check the DMA handle allocation */
+  if(NULL == hdma)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+  assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+  assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+  assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+  assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+  assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+  assert_param(IS_DMA_MODE(hdma->Init.Mode));
+  assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+  
+  /* Change DMA peripheral state */
+  hdma->State = HAL_DMA_STATE_BUSY;
+
+  /* Get the CR register value */
+  tmp = hdma->Instance->CCR;
+  
+  /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */
+  tmp &= ((uint32_t)~(DMA_CCR_PL    | DMA_CCR_MSIZE  | DMA_CCR_PSIZE  | \
+                      DMA_CCR_MINC  | DMA_CCR_PINC   | DMA_CCR_CIRC   | \
+                      DMA_CCR_DIR));
+  
+  /* Prepare the DMA Channel configuration */
+  tmp |=  hdma->Init.Direction        |
+          hdma->Init.PeriphInc           | hdma->Init.MemInc           |
+          hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+          hdma->Init.Mode                | hdma->Init.Priority;
+
+  /* Write to DMA Channel CR register */
+  hdma->Instance->CCR = tmp;  
+  
+  /* Initialize DmaBaseAddress and ChannelIndex parameters used 
+     by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
+  DMA_CalcBaseAndBitshift(hdma);
+  
+  /* Initialise the error code */
+  hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+  /* Initialize the DMA state*/
+  hdma->State = HAL_DMA_STATE_READY;
+  
+  /* Allocate lock resource and initialize it */
+  hdma->Lock = HAL_UNLOCKED;
+  
+  return HAL_OK;
+}  
+  
+/**
+  * @brief  DeInitialize the DMA peripheral 
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Channel.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+  /* Check the DMA handle allocation */
+  if(NULL == hdma)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+  /* Disable the selected DMA Channelx */
+  hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+  /* Reset DMA Channel control register */
+  hdma->Instance->CCR  = 0U;
+
+  /* Reset DMA Channel Number of Data to Transfer register */
+  hdma->Instance->CNDTR = 0U;
+
+  /* Reset DMA Channel peripheral address register */
+  hdma->Instance->CPAR  = 0U;
+  
+  /* Reset DMA Channel memory address register */
+  hdma->Instance->CMAR = 0U;
+
+/* Get DMA Base Address */  
+  DMA_CalcBaseAndBitshift(hdma);
+
+  /* Clear all flags */
+  hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+  /* Clean callbacks */
+  hdma->XferCpltCallback = NULL;
+  hdma->XferHalfCpltCallback = NULL;
+  hdma->XferErrorCallback = NULL;
+  hdma->XferAbortCallback = NULL;
+
+  /* Reset the error code */
+  hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+  /* Reset the DMA state */
+  hdma->State = HAL_DMA_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions 
+ *  @brief   I/O operation functions  
+ *
+@verbatim   
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure the source, destination address and data length and Start DMA transfer
+      (+) Configure the source, destination address and data length and 
+          Start DMA transfer with interrupt
+      (+) Abort DMA transfer
+      (+) Poll for transfer complete
+      (+) Handle DMA interrupt request  
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start the DMA Transfer.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA Channel.  
+  * @param  SrcAddress The source memory Buffer address
+  * @param  DstAddress The destination memory Buffer address
+  * @param  DataLength The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+	HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+  
+  /* Process locked */
+  __HAL_LOCK(hdma);
+  
+  if(HAL_DMA_STATE_READY == hdma->State)
+  {
+  	/* Change DMA peripheral state */  
+  	hdma->State = HAL_DMA_STATE_BUSY;
+  	
+  	hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+  	
+  	/* Disable the peripheral */
+  	hdma->Instance->CCR &= ~DMA_CCR_EN;  
+  	
+  	/* Configure the source, destination address and the data length */
+  	DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+  	
+  	/* Enable the Peripheral */
+  	hdma->Instance->CCR |= DMA_CCR_EN;  
+  }
+  else
+  {
+  	/* Process Unlocked */
+  	__HAL_UNLOCK(hdma);
+  	
+  	/* Remain BUSY */
+  	status = HAL_BUSY;
+  }  
+
+  return status; 
+} 
+
+/**
+  * @brief  Start the DMA Transfer with interrupt enabled.
+  * @param  hdma       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Channel.  
+  * @param  SrcAddress The source memory Buffer address
+  * @param  DstAddress The destination memory Buffer address
+  * @param  DataLength The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+	HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+  
+  /* Process locked */
+  __HAL_LOCK(hdma);
+  
+  if(HAL_DMA_STATE_READY == hdma->State)
+  {
+  	/* Change DMA peripheral state */  
+  	hdma->State = HAL_DMA_STATE_BUSY;
+  	
+  	hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+  	
+  	/* Disable the peripheral */
+  	hdma->Instance->CCR &= ~DMA_CCR_EN;
+  	
+  	/* Configure the source, destination address and the data length */  
+  	DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+  	
+  	/* Enable the transfer complete, & transfer error interrupts */
+  	/* Half transfer interrupt is optional: enable it only if associated callback is available */
+    if(NULL != hdma->XferHalfCpltCallback )
+    {
+      hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+    }
+  	else
+  	{
+  		hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_TE);
+  		hdma->Instance->CCR &= ~DMA_IT_HT;
+  	}
+  	
+  	/* Enable the Peripheral */
+  	hdma->Instance->CCR |= DMA_CCR_EN;
+  }
+  else
+  {
+  	/* Process Unlocked */
+    __HAL_UNLOCK(hdma); 
+  
+    /* Remain BUSY */
+    status = HAL_BUSY;
+  }     
+  
+  return status;    
+} 
+
+/**
+  * @brief  Abort the DMA Transfer.
+  * @param  hdma  pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Channel.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+  if(hdma->State != HAL_DMA_STATE_BUSY)
+  {
+    /* no transfer ongoing */
+    hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdma);
+    
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Disable DMA IT */
+    hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+    
+    /* Disable the channel */
+    hdma->Instance->CCR &= ~DMA_CCR_EN;
+    
+    /* Clear all flags */
+    hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex);
+  }
+  /* Change the DMA state*/
+  hdma->State = HAL_DMA_STATE_READY; 
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdma);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort the DMA Transfer in Interrupt mode.
+  * @param  hdma  pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
+{  
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  if(HAL_DMA_STATE_BUSY != hdma->State)
+  {
+    /* no transfer ongoing */
+    hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+        
+    status = HAL_ERROR;
+  }
+  else
+  { 
+  
+    /* Disable DMA IT */
+    hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+    
+    /* Disable the channel */
+    hdma->Instance->CCR &= ~DMA_CCR_EN;
+    
+    /* Clear all flags */
+    hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+    
+    /* Change the DMA state */
+    hdma->State = HAL_DMA_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdma);
+    
+    /* Call User Abort callback */ 
+    if(hdma->XferAbortCallback != NULL)
+    {
+      hdma->XferAbortCallback(hdma);
+    } 
+  }
+  return status;
+}
+
+/**
+  * @brief  Polling for transfer complete.
+  * @param  hdma    pointer to a DMA_HandleTypeDef structure that contains
+  *                  the configuration information for the specified DMA Channel.
+  * @param  CompleteLevel Specifies the DMA level complete.  
+  * @param  Timeout       Timeout duration.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
+{
+  uint32_t temp;
+  uint32_t tickstart = 0U;
+  
+  if(HAL_DMA_STATE_BUSY != hdma->State)
+  {
+    /* no transfer ongoing */
+    hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+    __HAL_UNLOCK(hdma);
+    return HAL_ERROR;
+  }
+  
+  /* Polling mode not supported in circular mode */
+  if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC))
+  {
+    hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+    return HAL_ERROR;
+  }
+  
+  /* Get the level transfer complete flag */
+  if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
+  {
+    /* Transfer Complete flag */
+    temp = DMA_FLAG_TC1 << hdma->ChannelIndex;
+  }
+  else
+  {
+    /* Half Transfer Complete flag */
+    temp = DMA_FLAG_HT1 << hdma->ChannelIndex;
+  }
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(RESET == (hdma->DmaBaseAddress->ISR & temp))
+  {
+    if(RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex)))
+    {      
+      /* When a DMA transfer error occurs */
+      /* A hardware clear of its EN bits is performed */
+      /* Clear all flags */
+      hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+      
+      /* Update error code */
+      hdma->ErrorCode = HAL_DMA_ERROR_TE;
+
+      /* Change the DMA state */
+      hdma->State= HAL_DMA_STATE_READY;       
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+      
+      return HAL_ERROR;      
+    }      
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        /* Update error code */
+        hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+        
+        /* Change the DMA state */
+        hdma->State = HAL_DMA_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);
+
+        return HAL_ERROR;
+      }
+    }
+  }
+
+  if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
+  {
+    /* Clear the transfer complete flag */
+    hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex;
+
+    /* The selected Channelx EN bit is cleared (DMA is disabled and 
+    all transfers are complete) */
+    hdma->State = HAL_DMA_STATE_READY;
+  }
+  else
+  { 
+    /* Clear the half transfer complete flag */
+    hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex;
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdma);  
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle DMA interrupt request.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Channel.  
+  * @retval None
+  */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+	uint32_t flag_it = hdma->DmaBaseAddress->ISR;
+  uint32_t source_it = hdma->Instance->CCR;
+          
+  /* Half Transfer Complete Interrupt management ******************************/
+  if ((RESET != (flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_HT)))
+  {
+  	/* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+  	if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+  	{
+  		/* Disable the half transfer interrupt */
+  		hdma->Instance->CCR &= ~DMA_IT_HT;
+  	}
+  	
+  	/* Clear the half transfer complete flag */
+  	hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex;
+  	
+  	/* DMA peripheral state is not updated in Half Transfer */
+  	/* State is updated only in Transfer Complete case */
+  	
+  	if(hdma->XferHalfCpltCallback != NULL)
+  	{
+  		/* Half transfer callback */
+  		hdma->XferHalfCpltCallback(hdma);
+  	}
+  }
+  
+  /* Transfer Complete Interrupt management ***********************************/
+  else if ((RESET != (flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TC)))
+  {
+  	if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+  	{
+  		/* Disable the transfer complete  & transfer error interrupts */
+  		/* if the DMA mode is not CIRCULAR */
+  		hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_TE);
+  		
+  		/* Change the DMA state */
+  		hdma->State = HAL_DMA_STATE_READY;
+  	}
+  	
+  	/* Clear the transfer complete flag */
+  	hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex;
+  	
+  	/* Process Unlocked */
+  	__HAL_UNLOCK(hdma);
+  	
+  	if(hdma->XferCpltCallback != NULL)
+  	{
+  		/* Transfer complete callback */
+  		hdma->XferCpltCallback(hdma);
+  	}
+  }
+  
+  /* Transfer Error Interrupt management ***************************************/
+  else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE)))
+  {
+  	/* When a DMA transfer error occurs */
+    /* A hardware clear of its EN bits is performed */
+    /* Then, disable all DMA interrupts */
+    hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+    
+    /* Clear all flags */
+    hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+    
+    /* Update error code */
+    hdma->ErrorCode = HAL_DMA_ERROR_TE;
+    
+    /* Change the DMA state */
+    hdma->State = HAL_DMA_STATE_READY;    
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdma); 
+    
+    if(hdma->XferErrorCallback != NULL)
+    {
+    	/* Transfer error callback */
+    	hdma->XferErrorCallback(hdma);
+    }
+   }
+}  
+
+/**
+  * @brief  Register callbacks
+  * @param  hdma                 pointer to a DMA_HandleTypeDef structure that contains
+  *                               the configuration information for the specified DMA Stream.
+  * @param  CallbackID           User Callback identifer
+  *                               a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+  * @param  pCallback            pointer to private callback function which has pointer to 
+  *                               a DMA_HandleTypeDef structure as parameter.
+  * @retval HAL status
+  */                          
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma))
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process locked */
+  __HAL_LOCK(hdma);
+  
+  if(HAL_DMA_STATE_READY == hdma->State)
+  {
+    switch (CallbackID)
+    {
+     case  HAL_DMA_XFER_CPLT_CB_ID:
+           hdma->XferCpltCallback = pCallback;
+           break;
+       
+     case  HAL_DMA_XFER_HALFCPLT_CB_ID:
+           hdma->XferHalfCpltCallback = pCallback;
+           break;         
+
+     case  HAL_DMA_XFER_ERROR_CB_ID:
+           hdma->XferErrorCallback = pCallback;
+           break;         
+           
+     case  HAL_DMA_XFER_ABORT_CB_ID:
+           hdma->XferAbortCallback = pCallback;
+           break; 
+           
+     default:
+           status = HAL_ERROR;
+           break;                                                            
+    }
+  }
+  else
+  {
+    status = HAL_ERROR;
+  } 
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hdma);
+  
+  return status;
+}
+
+/**
+  * @brief  UnRegister callbacks
+  * @param  hdma                 pointer to a DMA_HandleTypeDef structure that contains
+  *                               the configuration information for the specified DMA Stream.
+  * @param  CallbackID           User Callback identifer
+  *                               a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+  * @retval HAL status
+  */              
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+    /* Process locked */
+  __HAL_LOCK(hdma);
+  
+  if(HAL_DMA_STATE_READY == hdma->State)
+  {
+    switch (CallbackID)
+    {
+     case  HAL_DMA_XFER_CPLT_CB_ID:
+           hdma->XferCpltCallback = NULL;
+           break;
+       
+     case  HAL_DMA_XFER_HALFCPLT_CB_ID:
+           hdma->XferHalfCpltCallback = NULL;
+           break;         
+
+     case  HAL_DMA_XFER_ERROR_CB_ID:
+           hdma->XferErrorCallback = NULL;
+           break;         
+           
+     case  HAL_DMA_XFER_ABORT_CB_ID:
+           hdma->XferAbortCallback = NULL;
+           break; 
+     
+    case   HAL_DMA_XFER_ALL_CB_ID:
+           hdma->XferCpltCallback = NULL;
+           hdma->XferHalfCpltCallback = NULL;
+           hdma->XferErrorCallback = NULL;
+           hdma->XferAbortCallback = NULL;
+           break; 
+     
+    default:
+           status = HAL_ERROR;
+           break;                                                            
+    }
+  }
+  else
+  {
+    status = HAL_ERROR;
+  } 
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hdma);
+  
+  return status;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ *  @brief    Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                    ##### State and Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the DMA state
+      (+) Get error code
+
+@endverbatim
+  * @{
+  */  
+
+/**
+  * @brief  Returns the DMA state.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Channel.  
+  * @retval HAL state
+  */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+  return hdma->State;
+}
+
+/**
+  * @brief  Return the DMA error code
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA Channel.
+  * @retval DMA Error Code
+  */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+  return hdma->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Set the DMA Transfer parameters.
+  * @param  hdma       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Channel.  
+  * @param  SrcAddress The source memory Buffer address
+  * @param  DstAddress The destination memory Buffer address
+  * @param  DataLength The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+	/* Clear all flags */
+  hdma->DmaBaseAddress->IFCR  = (DMA_FLAG_GL1 << hdma->ChannelIndex);
+  
+  /* Configure DMA Channel data length */
+  hdma->Instance->CNDTR = DataLength;
+  
+  /* Memory to Peripheral */
+  if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+  {   
+    /* Configure DMA Channel destination address */
+    hdma->Instance->CPAR = DstAddress;
+    
+    /* Configure DMA Channel source address */
+    hdma->Instance->CMAR = SrcAddress;
+  }
+  /* Peripheral to Memory */
+  else
+  {
+    /* Configure DMA Channel source address */
+    hdma->Instance->CPAR = SrcAddress;
+    
+    /* Configure DMA Channel destination address */
+    hdma->Instance->CMAR = DstAddress;
+  }
+}
+
+/**
+  * @brief  set the DMA base address and channel index depending on DMA instance
+  * @param  hdma       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream. 
+  * @retval None
+  */
+static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
+{
+#if defined (DMA2)
+  /* calculation of the channel index */
+  if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1))
+  {
+    /* DMA1 */
+    hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
+    hdma->DmaBaseAddress = DMA1;
+  }
+  else 
+  {
+    /* DMA2 */
+    hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U;
+    hdma->DmaBaseAddress = DMA2;
+  }
+#else
+  /* calculation of the channel index */
+  /* DMA1 */
+  hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
+  hdma->DmaBaseAddress = DMA1;
+#endif
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+  
+  /**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c
new file mode 100644
index 0000000..1adb8f7
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_exti.c
@@ -0,0 +1,559 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_exti.c
+  * @author  MCD Application Team
+  * @brief   EXTI HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Extended Interrupts and events controller (EXTI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### EXTI Peripheral features #####
+  ==============================================================================
+  [..]
+    (+) Each Exti line can be configured within this driver.
+
+    (+) Exti line can be configured in 3 different modes
+        (++) Interrupt
+        (++) Event
+        (++) Both of them
+
+    (+) Configurable Exti lines can be configured with 3 different triggers
+        (++) Rising
+        (++) Falling
+        (++) Both of them
+
+    (+) When set in interrupt mode, configurable Exti lines have two different
+        interrupts pending registers which allow to distinguish which transition
+        occurs:
+        (++) Rising edge pending interrupt
+        (++) Falling
+
+    (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
+        be selected through multiplexer.
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+
+    (#) Configure the EXTI line using HAL_EXTI_SetConfigLine().
+        (++) Choose the interrupt line number by setting "Line" member from
+             EXTI_ConfigTypeDef structure.
+        (++) Configure the interrupt and/or event mode using "Mode" member from
+             EXTI_ConfigTypeDef structure.
+        (++) For configurable lines, configure rising and/or falling trigger
+             "Trigger" member from EXTI_ConfigTypeDef structure.
+        (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel"
+             member from GPIO_InitTypeDef structure.
+
+    (#) Get current Exti configuration of a dedicated line using
+        HAL_EXTI_GetConfigLine().
+        (++) Provide exiting handle as parameter.
+        (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
+
+    (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
+        (++) Provide exiting handle as parameter.
+
+    (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
+        (++) Provide exiting handle as first parameter.
+        (++) Provide which callback will be registered using one value from
+             EXTI_CallbackIDTypeDef.
+        (++) Provide callback function pointer.
+
+    (#) Get interrupt pending bit using HAL_EXTI_GetPending().
+
+    (#) Clear interrupt pending bit using HAL_EXTI_GetPending().
+
+    (#) Generate software interrupt using HAL_EXTI_GenerateSWI().
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup EXTI
+  * @{
+  */
+/** MISRA C:2012 deviation rule has been granted for following rule:
+  * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out
+  * of bounds [0,3] in following API :
+  * HAL_EXTI_SetConfigLine
+  * HAL_EXTI_GetConfigLine
+  * HAL_EXTI_ClearConfigLine
+  */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup EXTI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group1
+  *  @brief    Configuration functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Configuration functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on EXTI configuration to be set.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(pExtiConfig->Line));
+  assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
+
+  /* Assign line number to handle */
+  hexti->Line = pExtiConfig->Line;
+
+  /* Compute line mask */
+  linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* Configure triggers for configurable lines */
+  if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
+  {
+    assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
+
+    /* Configure rising trigger */
+    /* Mask or set line */
+    if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u)
+    {
+      EXTI->RTSR |= maskline;
+    }
+    else
+    {
+      EXTI->RTSR &= ~maskline;
+    }
+
+    /* Configure falling trigger */
+    /* Mask or set line */
+    if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u)
+    {
+      EXTI->FTSR |= maskline;
+    }
+    else
+    {
+      EXTI->FTSR &= ~maskline;
+    }
+
+
+    /* Configure gpio port selection in case of gpio exti line */
+    if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = SYSCFG->EXTICR[linepos >> 2u];
+      regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      SYSCFG->EXTICR[linepos >> 2u] = regval;
+    }
+  }
+
+  /* Configure interrupt mode : read current mode */
+  /* Mask or set line */
+  if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u)
+  {
+    EXTI->IMR |= maskline;
+  }
+  else
+  {
+    EXTI->IMR &= ~maskline;
+  }
+
+  /* Configure event mode : read current mode */
+  /* Mask or set line */
+  if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u)
+  {
+    EXTI->EMR |= maskline;
+  }
+  else
+  {
+    EXTI->EMR &= ~maskline;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on structure to store Exti configuration.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* Store handle line number to configuration structure */
+  pExtiConfig->Line = hexti->Line;
+
+  /* Compute line mask */
+  linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* 1] Get core mode : interrupt */
+
+  /* Check if selected line is enable */
+  if ((EXTI->IMR & maskline) != 0x00u)
+  {
+    pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
+  }
+  else
+  {
+    pExtiConfig->Mode = EXTI_MODE_NONE;
+  }
+
+  /* Get event mode */
+  /* Check if selected line is enable */
+  if ((EXTI->EMR & maskline) != 0x00u)
+  {
+    pExtiConfig->Mode |= EXTI_MODE_EVENT;
+  }
+
+  /* 2] Get trigger for configurable lines : rising */
+  if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
+  {
+    /* Check if configuration of selected line is enable */
+    if ((EXTI->RTSR & maskline) != 0x00u)
+    {
+      pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
+    }
+    else
+    {
+      pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
+    }
+
+    /* Get falling configuration */
+    /* Check if configuration of selected line is enable */
+    if ((EXTI->FTSR & maskline) != 0x00u)
+    {
+      pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
+    }
+
+    /* Get Gpio port selection for gpio lines */
+    if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = SYSCFG->EXTICR[linepos >> 2u];
+      pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
+    }
+    else
+    {
+      pExtiConfig->GPIOSel = 0x00u;
+    }
+  }
+  else
+  {
+    /* No Trigger selected */
+    pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
+    pExtiConfig->GPIOSel = 0x00u;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Clear whole configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
+{
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* compute line mask */
+  linepos = (hexti->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* 1] Clear interrupt mode */
+  EXTI->IMR = (EXTI->IMR & ~maskline);
+
+  /* 2] Clear event mode */
+  EXTI->EMR = (EXTI->EMR & ~maskline);
+
+  /* 3] Clear triggers in case of configurable lines */
+  if ((hexti->Line & EXTI_CONFIG) != 0x00u)
+  {
+    EXTI->RTSR = (EXTI->RTSR & ~maskline);
+    EXTI->FTSR = (EXTI->FTSR & ~maskline);
+
+    /* Get Gpio port selection for gpio lines */
+    if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = SYSCFG->EXTICR[linepos >> 2u];
+      regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      SYSCFG->EXTICR[linepos >> 2u] = regval;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Register callback for a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  CallbackID User callback identifier.
+  *         This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
+  * @param  pPendingCbfn function pointer to be stored as callback.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  switch (CallbackID)
+  {
+    case  HAL_EXTI_COMMON_CB_ID:
+      hexti->PendingCallback = pPendingCbfn;
+      break;
+
+    default:
+      status = HAL_ERROR;
+      break;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Store line number as handle private field.
+  * @param  hexti Exti handle.
+  * @param  ExtiLine Exti line number.
+  *         This parameter can be from 0 to @ref EXTI_LINE_NB.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
+{
+  /* Check the parameters */
+  assert_param(IS_EXTI_LINE(ExtiLine));
+
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Store line number as handle private field */
+    hexti->Line = ExtiLine;
+
+    return HAL_OK;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group2
+  *  @brief EXTI IO functions.
+  *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Handle EXTI interrupt request.
+  * @param  hexti Exti handle.
+  * @retval none.
+  */
+void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
+{
+  uint32_t regval;
+  uint32_t maskline;
+
+  /* Compute line mask */
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  /* Get pending bit  */
+  regval = (EXTI->PR & maskline);
+  if (regval != 0x00u)
+  {
+    /* Clear pending bit */
+    EXTI->PR = maskline;
+
+    /* Call callback */
+    if (hexti->PendingCallback != NULL)
+    {
+      hexti->PendingCallback();
+    }
+  }
+}
+
+/**
+  * @brief  Get interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be checked.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING_FALLING
+  *         This parameter is kept for compatibility with other series.
+  * @retval 1 if interrupt is pending else 0.
+  */
+uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  /* Compute line mask */
+  linepos = (hexti->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* return 1 if bit is set else 0 */
+  regval = ((EXTI->PR & maskline) >> linepos);
+  return regval;
+}
+
+/**
+  * @brief  Clear interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be clear.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING_FALLING
+  *         This parameter is kept for compatibility with other series.
+  * @retval None.
+  */
+void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  uint32_t maskline;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  /* Compute line mask */
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  /* Clear Pending bit */
+  EXTI->PR =  maskline;
+}
+
+/**
+  * @brief  Generate a software interrupt for a dedicated line.
+  * @param  hexti Exti handle.
+  * @retval None.
+  */
+void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
+{
+  uint32_t maskline;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+
+  /* Compute line mask */
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  /* Generate Software interrupt */
+  EXTI->SWIER = maskline;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_EXTI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c
new file mode 100644
index 0000000..94ad6e9
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c
@@ -0,0 +1,694 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_flash.c
+  * @author  MCD Application Team
+  * @brief   FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the internal FLASH memory:
+  *           + Program operations functions
+  *           + Memory Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### FLASH peripheral features #####
+  ==============================================================================
+  [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses 
+       to the Flash memory. It implements the erase and program Flash memory operations 
+       and the read and write protection mechanisms.
+
+  [..] The Flash memory interface accelerates code execution with a system of instruction
+      prefetch. 
+
+  [..] The FLASH main features are:
+      (+) Flash memory read operations
+      (+) Flash memory program/erase operations
+      (+) Read / write protections
+      (+) Prefetch on I-Code
+      (+) Option Bytes programming
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]                             
+      This driver provides functions and macros to configure and program the FLASH 
+      memory of all STM32F0xx devices.
+    
+      (#) FLASH Memory I/O Programming functions: this group includes all needed
+          functions to erase and program the main memory:
+        (++) Lock and Unlock the FLASH interface
+        (++) Erase function: Erase page, erase all pages
+        (++) Program functions: half word, word and doubleword
+      (#) FLASH Option Bytes Programming functions: this group includes all needed
+          functions to manage the Option Bytes:
+        (++) Lock and Unlock the Option Bytes
+        (++) Set/Reset the write protection
+        (++) Set the Read protection Level
+        (++) Program the user Option Bytes
+        (++) Launch the Option Bytes loader
+        (++) Erase Option Bytes
+        (++) Program the data Option Bytes
+        (++) Get the Write protection.
+        (++) Get the user option bytes.
+    
+      (#) Interrupts and flags management functions : this group 
+          includes all needed functions to:
+        (++) Handle FLASH interrupts
+        (++) Wait for last FLASH operation according to its status
+        (++) Get error flag status
+
+  [..] In addition to these function, this driver includes a set of macros allowing
+       to handle the following operations:
+      
+      (+) Set/Get the latency
+      (+) Enable/Disable the prefetch buffer
+      (+) Enable/Disable the FLASH interrupts
+      (+) Monitor the FLASH flags status
+          
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/** @defgroup FLASH FLASH
+  * @brief FLASH HAL module driver
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private macro ---------------------------- ---------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+  * @{
+  */
+ 
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+  * @{
+  */
+/* Variables used for Erase pages under interruption*/
+FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+  * @{
+  */
+static  void   FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static  void   FLASH_SetErrorCode(void);
+extern void    FLASH_PageErase(uint32_t PageAddress);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+  * @{
+  */
+  
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions 
+  *  @brief   Programming operation functions 
+  *
+@verbatim   
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Program halfword, word or double word at a specified address
+  * @note   The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+  *         The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @note   FLASH should be previously erased before new programming (only exception to this 
+  *         is when 0x0000 is programmed)
+  *
+  * @param  TypeProgram   Indicate the way to program at a specified address.
+  *                       This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address       Specifie the address to be programmed.
+  * @param  Data          Specifie the data to be programmed
+  * 
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  uint8_t index = 0U;
+  uint8_t nbiterations = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+  assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+    {
+      /* Program halfword (16-bit) at a specified address. */
+      nbiterations = 1U;
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+    {
+      /* Program word (32-bit = 2*16-bit) at a specified address. */
+      nbiterations = 2U;
+    }
+    else
+    {
+      /* Program double word (64-bit = 4*16-bit) at a specified address. */
+      nbiterations = 4U;
+    }
+
+    for (index = 0U; index < nbiterations; index++)
+    {
+      FLASH_Program_HalfWord((Address + (2U*index)), (uint16_t)(Data >> (16U*index)));
+
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+    
+        /* If the program operation is completed, disable the PG Bit */
+        CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+      /* In case of error, stop programming procedure */
+      if (status != HAL_OK)
+      {
+        break;
+      }
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief  Program halfword, word or double word at a specified address  with interrupt enabled.
+  * @note   The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+  *         The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                      This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address      Specifie the address to be programmed.
+  * @param  Data         Specifie the data to be programmed
+  * 
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+  assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+  /* Enable End of FLASH Operation and Error source interrupts */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+  
+  pFlash.Address = Address;
+  pFlash.Data = Data;
+
+  if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+  {
+    pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD;
+    /* Program halfword (16-bit) at a specified address. */
+    pFlash.DataRemaining = 1U;
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+  {
+    pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD;
+    /* Program word (32-bit : 2*16-bit) at a specified address. */
+    pFlash.DataRemaining = 2U;
+  }
+  else
+  {
+    pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD;
+    /* Program double word (64-bit : 4*16-bit) at a specified address. */
+    pFlash.DataRemaining = 4U;
+  }
+
+  /* Program halfword (16-bit) at a specified address. */
+  FLASH_Program_HalfWord(Address, (uint16_t)Data);
+
+  return status;
+}
+
+/**
+  * @brief This function handles FLASH interrupt request.
+  * @retval None
+  */
+void HAL_FLASH_IRQHandler(void)
+{
+  uint32_t addresstmp = 0U;
+  
+  /* Check FLASH operation error flags */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+  {
+    /* Return the faulty address */
+    addresstmp = pFlash.Address;
+    /* Reset address */
+    pFlash.Address = 0xFFFFFFFFU;
+  
+    /* Save the Error code */
+    FLASH_SetErrorCode();
+    
+    /* FLASH error interrupt user callback */
+    HAL_FLASH_OperationErrorCallback(addresstmp);
+
+    /* Stop the procedure ongoing */
+    pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+  }
+
+  /* Check FLASH End of Operation flag  */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+    
+    /* Process can continue only if no error detected */
+    if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+    {
+      if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
+      {
+        /* Nb of pages to erased can be decreased */
+        pFlash.DataRemaining--;
+
+        /* Check if there are still pages to erase */
+        if(pFlash.DataRemaining != 0U)
+        {
+          addresstmp = pFlash.Address;
+          /*Indicate user which sector has been erased */
+          HAL_FLASH_EndOfOperationCallback(addresstmp);
+
+          /*Increment sector number*/
+          addresstmp = pFlash.Address + FLASH_PAGE_SIZE;
+          pFlash.Address = addresstmp;
+
+          /* If the erase operation is completed, disable the PER Bit */
+          CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+
+          FLASH_PageErase(addresstmp);
+        }
+        else
+        {
+          /* No more pages to Erase, user callback can be called. */
+          /* Reset Sector and stop Erase pages procedure */
+          pFlash.Address = addresstmp = 0xFFFFFFFFU;
+          pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+          /* FLASH EOP interrupt user callback */
+          HAL_FLASH_EndOfOperationCallback(addresstmp);
+        }
+      }
+      else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+      {
+        /* Operation is completed, disable the MER Bit */
+        CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+
+          /* MassErase ended. Return the selected bank */
+          /* FLASH EOP interrupt user callback */
+          HAL_FLASH_EndOfOperationCallback(0);
+
+          /* Stop Mass Erase procedure*/
+          pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        }
+      else
+      {
+        /* Nb of 16-bit data to program can be decreased */
+        pFlash.DataRemaining--;
+        
+        /* Check if there are still 16-bit data to program */
+        if(pFlash.DataRemaining != 0U)
+        {
+          /* Increment address to 16-bit */
+          pFlash.Address += 2;
+          addresstmp = pFlash.Address;
+          
+          /* Shift to have next 16-bit data */
+          pFlash.Data = (pFlash.Data >> 16U);
+          
+          /* Operation is completed, disable the PG Bit */
+          CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+
+          /*Program halfword (16-bit) at a specified address.*/
+          FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data);
+        }
+        else
+        {
+          /* Program ended. Return the selected address */
+          /* FLASH EOP interrupt user callback */
+          if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD)
+          {
+            HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+          }
+          else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD)
+          {
+            HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2U);
+          }
+          else 
+          {
+            HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6U);
+          }
+        
+          /* Reset Address and stop Program procedure */
+          pFlash.Address = 0xFFFFFFFFU;
+          pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        }
+      }
+    }
+  }
+  
+
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+  {
+    /* Operation is completed, disable the PG, PER and MER Bits */
+    CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER));
+
+    /* Disable End of FLASH Operation and Error source interrupts */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(&pFlash);
+  }
+}
+
+/**
+  * @brief  FLASH end of operation interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                 - Mass Erase: No return value expected
+  *                 - Pages Erase: Address of the page which has been erased 
+  *                    (if 0xFFFFFFFF, it means that all the selected pages have been erased)
+  *                 - Program: Address which was selected for data program
+  * @retval none
+  */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  FLASH operation error interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                 - Mass Erase: No return value expected
+  *                 - Pages Erase: Address of the page which returned an error
+  *                 - Program: Address which was selected for data program
+  * @retval none
+  */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions 
+ *  @brief   management functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH 
+    memory operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Unlock the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+  {
+    /* Authorize the FLASH Registers access */
+    WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+    WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+
+    /* Verify Flash is unlocked */
+    if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+    {
+      status = HAL_ERROR;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Locks the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+  /* Set the LOCK Bit to lock the FLASH Registers access */
+  SET_BIT(FLASH->CR, FLASH_CR_LOCK);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Unlock the FLASH Option Control Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+  if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE))
+  {
+    /* Authorizes the Option Byte register programming */
+    WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
+    WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
+  }
+  else
+  {
+    return HAL_ERROR;
+  }  
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Lock the FLASH Option Control Registers access.
+  * @retval HAL Status 
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+  /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE);
+  
+  return HAL_OK;  
+}
+  
+/**
+  * @brief  Launch the option byte loading.
+  * @note   This function will reset automatically the MCU.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+  /* Set the OBL_Launch bit to launch the option byte loading */
+  SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH);
+  
+  /* Wait for last operation to be completed */
+  return(FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE));
+}
+
+/**
+  * @}
+  */  
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions 
+ *  @brief    Peripheral errors functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection permit to get in run-time errors of  the FLASH peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Get the specific FLASH error flag.
+  * @retval FLASH_ErrorCode The returned value can be:
+  *            @ref FLASH_Error_Codes
+  */
+uint32_t HAL_FLASH_GetError(void)
+{
+   return pFlash.ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+  * @brief  Program a half-word (16-bit) at a specified address.
+  * @param  Address specify the address to be programmed.
+  * @param  Data    specify the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+  /* Clean the error context */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+  
+    /* Proceed to program the new data */
+    SET_BIT(FLASH->CR, FLASH_CR_PG);
+
+  /* Write data in the address */
+  *(__IO uint16_t*)Address = Data;
+}
+
+/**
+  * @brief  Wait for a FLASH operation to complete.
+  * @param  Timeout  maximum flash operation timeout
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+  /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+     Even if the FLASH operation fails, the BUSY flag will be reset and an error
+     flag will be set */
+     
+  uint32_t tickstart = HAL_GetTick();
+     
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) 
+  { 
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Check FLASH End of Operation flag  */
+  if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)  || 
+     __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+  {
+    /*Save the error code*/
+    FLASH_SetErrorCode();
+    return HAL_ERROR;
+  }
+
+  /* There is no error flag set */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Set the specific FLASH error flag.
+  * @retval None
+  */
+static void FLASH_SetErrorCode(void)
+{
+  uint32_t flags = 0U;
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+    flags |= FLASH_FLAG_WRPERR;
+  }
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG;
+    flags |= FLASH_FLAG_PGERR;
+  }
+  /* Clear FLASH error pending bits */
+  __HAL_FLASH_CLEAR_FLAG(flags);
+}  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c
new file mode 100644
index 0000000..7c30632
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c
@@ -0,0 +1,984 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_flash_ex.c
+  * @author  MCD Application Team
+  * @brief   Extended FLASH HAL module driver.
+  *    
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the FLASH peripheral:
+  *           + Extended Initialization/de-initialization functions
+  *           + Extended I/O operation functions
+  *           + Extended Peripheral Control functions 
+  *         
+  @verbatim
+  ==============================================================================
+               ##### Flash peripheral extended features  #####
+  ==============================================================================
+           
+                      ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to configure and program the FLASH memory 
+       of all STM32F0xxx devices. It includes
+       
+        (++) Set/Reset the write protection
+        (++) Program the user Option Bytes
+        (++) Get the Read protection Level
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/** @addtogroup FLASH
+  * @{
+  */
+/** @addtogroup FLASH_Private_Variables
+ * @{
+ */
+/* Variables used for Erase pages under interruption*/
+extern FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx FLASHEx
+  * @brief FLASH HAL Extension module driver
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants
+ * @{
+ */
+#define FLASH_POSITION_IWDGSW_BIT        8U
+#define FLASH_POSITION_OB_USERDATA0_BIT  16U
+#define FLASH_POSITION_OB_USERDATA1_BIT  24U
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
+ * @{
+ */
+/* Erase operations */
+static void              FLASH_MassErase(void);
+void    FLASH_PageErase(uint32_t PageAddress);
+
+/* Option bytes control */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
+static uint32_t          FLASH_OB_GetWRP(void);
+static uint32_t          FLASH_OB_GetRDP(void);
+static uint8_t           FLASH_OB_GetUser(void);
+
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+  * @{
+  */
+  
+/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions
+ *  @brief   FLASH Memory Erasing functions
+  *
+@verbatim   
+  ==============================================================================
+                ##### FLASH Erasing Programming functions ##### 
+  ==============================================================================
+
+    [..] The FLASH Memory Erasing functions, includes the following functions:
+    (+) @ref HAL_FLASHEx_Erase: return only when erase has been done
+    (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback 
+        is called with parameter 0xFFFFFFFF
+
+    [..] Any operation of erase should follow these steps:
+    (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and 
+        program memory access.
+    (#) Call the desired function to erase page.
+    (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access 
+       (recommended to protect the FLASH memory against possible unwanted operation).
+
+@endverbatim
+  * @{
+  */
+  
+
+/**
+  * @brief  Perform a mass erase or erase the specified FLASH memory pages
+  * @note   To correctly run this function, the @ref HAL_FLASH_Unlock() function
+  *         must be called before.
+  *         Call the @ref HAL_FLASH_Lock() to disable the flash memory access 
+  *         (recommended to protect the FLASH memory against possible unwanted operation)
+  * @param[in]  pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+  *         contains the configuration information for the erasing.
+  *
+  * @param[out]  PageError pointer to variable  that
+  *         contains the configuration information on faulty page in case of error
+  *         (0xFFFFFFFF means that all the pages have been correctly erased)
+  *
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  uint32_t address = 0U;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+  if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+  {
+      /* Mass Erase requested for Bank1 */
+      /* Wait for last operation to be completed */
+      if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
+      {
+        /*Mass erase to be done*/
+        FLASH_MassErase();
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+        
+        /* If the erase operation is completed, disable the MER Bit */
+        CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+      }
+  }
+  else
+  {
+    /* Page Erase is requested */
+    /* Check the parameters */
+    assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+    assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+    
+      /* Page Erase requested on address located on bank1 */
+      /* Wait for last operation to be completed */
+      if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
+      {
+        /*Initialization of PageError variable*/
+        *PageError = 0xFFFFFFFFU;
+        
+        /* Erase page by page to be done*/
+        for(address = pEraseInit->PageAddress;
+            address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress);
+            address += FLASH_PAGE_SIZE)
+        {
+          FLASH_PageErase(address);
+          
+          /* Wait for last operation to be completed */
+          status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+          
+          /* If the erase operation is completed, disable the PER Bit */
+          CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+          
+          if (status != HAL_OK)
+          {
+            /* In case of error, stop erase procedure and return the faulty address */
+            *PageError = address;
+            break;
+          }
+        }
+      }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief  Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled
+  * @note   To correctly run this function, the @ref HAL_FLASH_Unlock() function
+  *         must be called before.
+  *         Call the @ref HAL_FLASH_Lock() to disable the flash memory access 
+  *         (recommended to protect the FLASH memory against possible unwanted operation)
+  * @param  pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+  *         contains the configuration information for the erasing.
+  *
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* If procedure already ongoing, reject the next one */
+  if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+  /* Enable End of FLASH Operation and Error source interrupts */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+  if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+  {
+    /*Mass erase to be done*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+        FLASH_MassErase();
+  }
+  else
+  {
+    /* Erase by page to be done*/
+
+    /* Check the parameters */
+    assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+    assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+
+    pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
+    pFlash.DataRemaining = pEraseInit->NbPages;
+    pFlash.Address = pEraseInit->PageAddress;
+
+    /*Erase 1st page and wait for IT*/
+    FLASH_PageErase(pEraseInit->PageAddress);
+  }
+
+  return status;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions
+ *  @brief   Option Bytes Programming functions
+  *
+@verbatim   
+  ==============================================================================
+                ##### Option Bytes Programming functions ##### 
+  ==============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH 
+    option bytes operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Erases the FLASH option bytes.
+  * @note   This functions erases all option bytes except the Read protection (RDP).
+  *         The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+  *         The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+  *         The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+  *         (system reset will occur)
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
+{
+  uint8_t rdptmp = OB_RDP_LEVEL_0;
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Get the actual read protection Option Byte value */
+  rdptmp = FLASH_OB_GetRDP();
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    /* Clean the error context */
+    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* If the previous operation is completed, proceed to erase the option bytes */
+    SET_BIT(FLASH->CR, FLASH_CR_OPTER);
+    SET_BIT(FLASH->CR, FLASH_CR_STRT);
+
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+    /* If the erase operation is completed, disable the OPTER Bit */
+    CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
+
+    if(status == HAL_OK)
+    {
+      /* Restore the last read protection Option Byte value */
+      status = FLASH_OB_RDP_LevelConfig(rdptmp);
+    }
+  }
+
+  /* Return the erase status */
+  return status;
+}
+
+/**
+  * @brief  Program option bytes
+  * @note   The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+  *         The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+  *         The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+  *         (system reset will occur)
+  *
+  * @param  pOBInit pointer to an FLASH_OBInitStruct structure that
+  *         contains the configuration information for the programming.
+  *
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+  /* Write protection configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+  {
+    assert_param(IS_WRPSTATE(pOBInit->WRPState));
+    if (pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+    {
+      /* Enable of Write protection on the selected page */
+      status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
+    }
+    else
+    {
+      /* Disable of Write protection on the selected page */
+      status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
+    }
+    if (status != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(&pFlash);
+      return status;
+    }
+  }
+
+  /* Read protection configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+  {
+    status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+    if (status != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(&pFlash);
+      return status;
+    }
+  }
+
+  /* USER configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+  {
+    status = FLASH_OB_UserConfig(pOBInit->USERConfig);
+    if (status != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(&pFlash);
+      return status;
+    }
+  }
+
+  /* DATA configuration*/
+  if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA)
+  {
+    status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
+    if (status != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(&pFlash);
+      return status;
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief  Get the Option byte configuration
+  * @param  pOBInit pointer to an FLASH_OBInitStruct structure that
+  *         contains the configuration information for the programming.
+  *
+  * @retval None
+  */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+  pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER;
+
+  /*Get WRP*/
+  pOBInit->WRPPage = FLASH_OB_GetWRP();
+
+  /*Get RDP Level*/
+  pOBInit->RDPLevel = FLASH_OB_GetRDP();
+
+  /*Get USER*/
+  pOBInit->USERConfig = FLASH_OB_GetUser();
+}
+
+/**
+  * @brief  Get the Option byte user data
+  * @param  DATAAdress Address of the option byte DATA
+  *          This parameter can be one of the following values:
+  *            @arg @ref OB_DATA_ADDRESS_DATA0
+  *            @arg @ref OB_DATA_ADDRESS_DATA1
+  * @retval Value programmed in USER data
+  */
+uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress)
+{
+  uint32_t value = 0U;
+  
+  if (DATAAdress == OB_DATA_ADDRESS_DATA0)
+  {
+    /* Get value programmed in OB USER Data0 */
+    value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT;
+  }
+  else
+  {
+    /* Get value programmed in OB USER Data1 */
+    value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT;
+  }
+  
+  return value;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASHEx_Private_Functions
+ * @{
+ */
+
+/**
+  * @brief  Full erase of FLASH memory Bank 
+  *
+  * @retval None
+  */
+static void FLASH_MassErase(void)
+{
+  /* Clean the error context */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* Only bank1 will be erased*/
+    SET_BIT(FLASH->CR, FLASH_CR_MER);
+    SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+  * @brief  Enable the write protection of the desired pages
+  * @note   An option byte erase is done automatically in this function. 
+  * @note   When the memory read protection level is selected (RDP level = 1), 
+  *         it is not possible to program or erase the flash page i if
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1 
+  * 
+  * @param  WriteProtectPage specifies the page(s) to be write protected.
+  *         The value of this parameter depend on device used within the same series 
+  * @retval HAL status 
+  */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint16_t WRP0_Data = 0xFFFFU;
+#if defined(OB_WRP1_WRP1)
+  uint16_t WRP1_Data = 0xFFFFU;
+#endif /* OB_WRP1_WRP1 */
+#if defined(OB_WRP2_WRP2)
+  uint16_t WRP2_Data = 0xFFFFU;
+#endif /* OB_WRP2_WRP2 */
+#if defined(OB_WRP3_WRP3)
+  uint16_t WRP3_Data = 0xFFFFU;
+#endif /* OB_WRP3_WRP3 */
+  
+  /* Check the parameters */
+  assert_param(IS_OB_WRP(WriteProtectPage));
+    
+  /* Get current write protected pages and the new pages to be protected ******/
+  WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage));
+  
+#if defined(OB_WRP_PAGES0TO15MASK)
+  WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+#elif defined(OB_WRP_PAGES0TO31MASK)
+  WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
+#endif /* OB_WRP_PAGES0TO31MASK */
+  
+#if defined(OB_WRP_PAGES16TO31MASK)
+  WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
+#elif defined(OB_WRP_PAGES32TO63MASK)
+  WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U);
+#endif /* OB_WRP_PAGES32TO63MASK */
+ 
+#if defined(OB_WRP_PAGES32TO47MASK)
+  WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
+#endif /* OB_WRP_PAGES32TO47MASK */
+
+#if defined(OB_WRP_PAGES48TO63MASK)
+  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24U); 
+#elif defined(OB_WRP_PAGES48TO127MASK)
+  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); 
+#endif /* OB_WRP_PAGES48TO63MASK */
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  { 
+    /* Clean the error context */
+    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* To be able to write again option byte, need to perform a option byte erase */
+    status = HAL_FLASHEx_OBErase();
+    if (status == HAL_OK)  
+    {
+      /* Enable write protection */
+      SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(OB_WRP0_WRP0)
+      if(WRP0_Data != 0xFFU)
+      {
+        OB->WRP0 &= WRP0_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP0_WRP0 */
+
+#if defined(OB_WRP1_WRP1)
+      if((status == HAL_OK) && (WRP1_Data != 0xFFU))
+      {
+        OB->WRP1 &= WRP1_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP1_WRP1 */
+
+#if defined(OB_WRP2_WRP2)
+      if((status == HAL_OK) && (WRP2_Data != 0xFFU))
+      {
+        OB->WRP2 &= WRP2_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP2_WRP2 */
+
+#if defined(OB_WRP3_WRP3)
+      if((status == HAL_OK) && (WRP3_Data != 0xFFU))
+      {
+        OB->WRP3 &= WRP3_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP3_WRP3 */
+
+      /* if the program operation is completed, disable the OPTPG Bit */
+      CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+    }
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Disable the write protection of the desired pages
+  * @note   An option byte erase is done automatically in this function. 
+  * @note   When the memory read protection level is selected (RDP level = 1), 
+  *         it is not possible to program or erase the flash page i if   
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1 
+  * 
+  * @param  WriteProtectPage specifies the page(s) to be write unprotected.
+  *         The value of this parameter depend on device used within the same series 
+  * @retval HAL status 
+  */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint16_t WRP0_Data = 0xFFFFU;
+#if defined(OB_WRP1_WRP1)
+  uint16_t WRP1_Data = 0xFFFFU;
+#endif /* OB_WRP1_WRP1 */
+#if defined(OB_WRP2_WRP2)
+  uint16_t WRP2_Data = 0xFFFFU;
+#endif /* OB_WRP2_WRP2 */
+#if defined(OB_WRP3_WRP3)
+  uint16_t WRP3_Data = 0xFFFFU;
+#endif /* OB_WRP3_WRP3 */
+  
+  /* Check the parameters */
+  assert_param(IS_OB_WRP(WriteProtectPage));
+
+  /* Get current write protected pages and the new pages to be unprotected ******/
+  WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage);
+
+#if defined(OB_WRP_PAGES0TO15MASK)
+  WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+#elif defined(OB_WRP_PAGES0TO31MASK)
+  WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
+#endif /* OB_WRP_PAGES0TO31MASK */
+  
+#if defined(OB_WRP_PAGES16TO31MASK)
+  WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
+#elif defined(OB_WRP_PAGES32TO63MASK)
+  WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U);
+#endif /* OB_WRP_PAGES32TO63MASK */
+ 
+#if defined(OB_WRP_PAGES32TO47MASK)
+  WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
+#endif /* OB_WRP_PAGES32TO47MASK */
+
+#if defined(OB_WRP_PAGES48TO63MASK)
+  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24U); 
+#elif defined(OB_WRP_PAGES48TO127MASK)
+  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); 
+#endif /* OB_WRP_PAGES48TO63MASK */
+
+    
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  { 
+    /* Clean the error context */
+    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* To be able to write again option byte, need to perform a option byte erase */
+    status = HAL_FLASHEx_OBErase();
+    if (status == HAL_OK)  
+    {
+      SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(OB_WRP0_WRP0)
+      if(WRP0_Data != 0xFFU)
+      {
+        OB->WRP0 &= WRP0_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP0_WRP0 */
+
+#if defined(OB_WRP1_WRP1)
+      if((status == HAL_OK) && (WRP1_Data != 0xFFU))
+      {
+        OB->WRP1 &= WRP1_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP1_WRP1 */
+
+#if defined(OB_WRP2_WRP2)
+      if((status == HAL_OK) && (WRP2_Data != 0xFFU))
+      {
+        OB->WRP2 &= WRP2_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP2_WRP2 */
+
+#if defined(OB_WRP3_WRP3)
+      if((status == HAL_OK) && (WRP3_Data != 0xFFU))
+      {
+        OB->WRP3 &= WRP3_Data;
+        
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      }
+#endif /* OB_WRP3_WRP3 */
+
+      /* if the program operation is completed, disable the OPTPG Bit */
+      CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+    }
+  }
+  return status;
+}
+
+/**
+  * @brief  Set the read protection level.
+  * @param  ReadProtectLevel specifies the read protection level.
+  *         This parameter can be one of the following values:
+  *            @arg @ref OB_RDP_LEVEL_0 No protection
+  *            @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
+  *            @arg @ref OB_RDP_LEVEL_2 Full chip protection
+  * @note   Warning: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  { 
+    /* Clean the error context */
+    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+    
+    /* If the previous operation is completed, proceed to erase the option bytes */
+    SET_BIT(FLASH->CR, FLASH_CR_OPTER);
+    SET_BIT(FLASH->CR, FLASH_CR_STRT);
+
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+    /* If the erase operation is completed, disable the OPTER Bit */
+    CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
+
+    if(status == HAL_OK)
+    {
+      /* Enable the Option Bytes Programming operation */
+      SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+      
+      WRITE_REG(OB->RDP, ReadProtectLevel);
+      
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); 
+      
+      /* if the program operation is completed, disable the OPTPG Bit */
+      CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+    }
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Program the FLASH User Option Byte.    
+  * @note   Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+  * @param  UserConfig The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4),
+  *         VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6). 
+  *         For few devices, following option bytes are available: nBOOT0(Bit3) & BOOT_SEL(Bit7).
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW)));
+  assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
+  assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
+  assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
+  assert_param(IS_OB_VDDA_ANALOG((UserConfig&OB_VDDA_ANALOG_ON)));
+  assert_param(IS_OB_SRAM_PARITY((UserConfig&OB_SRAM_PARITY_RESET)));
+#if defined(FLASH_OBR_BOOT_SEL)
+  assert_param(IS_OB_BOOT_SEL((UserConfig&OB_BOOT_SEL_SET)));
+  assert_param(IS_OB_BOOT0((UserConfig&OB_BOOT0_SET)));
+#endif /* FLASH_OBR_BOOT_SEL */
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {     
+    /* Clean the error context */
+    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* Enable the Option Bytes Programming operation */
+    SET_BIT(FLASH->CR, FLASH_CR_OPTPG); 
+ 
+#if defined(FLASH_OBR_BOOT_SEL)
+    OB->USER = UserConfig;
+#else
+    OB->USER = (UserConfig | 0x88U);
+#endif
+
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+    /* if the program operation is completed, disable the OPTPG Bit */
+    CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+  }
+  
+  return status; 
+}
+
+/**
+  * @brief  Programs a half word at a specified Option Byte Data address.
+  * @note   The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+  *         The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+  *         The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes 
+  *         (system reset will occur)
+  *         Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+  * @param  Address specifies the address to be programmed.
+  *         This parameter can be 0x1FFFF804 or 0x1FFFF806. 
+  * @param  Data specifies the data to be programmed.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Check the parameters */
+  assert_param(IS_OB_DATA_ADDRESS(Address));
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    /* Clean the error context */
+    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* Enables the Option Bytes Programming operation */
+    SET_BIT(FLASH->CR, FLASH_CR_OPTPG); 
+    *(__IO uint16_t*)Address = Data;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+    
+    /* If the program operation is completed, disable the OPTPG Bit */
+    CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+  }
+  /* Return the Option Byte Data Program Status */
+  return status;
+}
+
+/**
+  * @brief  Return the FLASH Write Protection Option Bytes value.
+  * @retval The FLASH Write Protection Option Bytes value
+  */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+  /* Return the FLASH write protection Register value */
+  return (uint32_t)(READ_REG(FLASH->WRPR));
+}
+
+/**
+  * @brief  Returns the FLASH Read Protection level.
+  * @retval FLASH RDP level
+  *         This parameter can be one of the following values:
+  *            @arg @ref OB_RDP_LEVEL_0 No protection
+  *            @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
+  *            @arg @ref OB_RDP_LEVEL_2 Full chip protection
+  */
+static uint32_t FLASH_OB_GetRDP(void)
+{
+  uint32_t tmp_reg;
+  
+  /* Read RDP level bits */
+  tmp_reg = READ_BIT(FLASH->OBR, (FLASH_OBR_RDPRT1 | FLASH_OBR_RDPRT2));
+
+  if (tmp_reg == 0U)
+  {
+    return OB_RDP_LEVEL_0;
+  }
+  else if ((tmp_reg & FLASH_OBR_RDPRT2) == FLASH_OBR_RDPRT2)
+  {
+    return OB_RDP_LEVEL_2;
+  }
+  else 
+  {
+    return OB_RDP_LEVEL_1;
+  }
+}
+
+/**
+  * @brief  Return the FLASH User Option Byte value.
+  * @retval  The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4),
+  *         VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6). 
+  *         For few devices, following option bytes are available: nBOOT0(Bit3) & BOOT_SEL(Bit7).
+  */
+static uint8_t FLASH_OB_GetUser(void)
+{
+  /* Return the User Option Byte */
+  return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+  * @brief  Erase the specified FLASH memory page
+  * @param  PageAddress FLASH page to erase
+  *         The value of this parameter depend on device used within the same series      
+  * 
+  * @retval None
+  */
+void FLASH_PageErase(uint32_t PageAddress)
+{
+  /* Clean the error context */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* Proceed to erase the page */
+    SET_BIT(FLASH->CR, FLASH_CR_PER);
+    WRITE_REG(FLASH->AR, PageAddress);
+    SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c
new file mode 100644
index 0000000..2c43ff5
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c
@@ -0,0 +1,543 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_gpio.c
+  * @author  MCD Application Team
+  * @brief   GPIO HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the General Purpose Input/Output (GPIO) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### GPIO Peripheral features #####
+  ==============================================================================         
+  [..] 
+    (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually
+  configured by software in several modes:
+        (++) Input mode
+        (++) Analog mode
+        (++) Output mode
+        (++) Alternate function mode
+        (++) External interrupt/event lines
+ 
+    (+) During and just after reset, the alternate functions and external interrupt
+  lines are not active and the I/O ports are configured in input floating mode.
+  
+    (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+  activated or not.
+           
+    (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+  type and the IO speed can be selected depending on the VDD value.
+       
+    (+) The microcontroller IO pins are connected to onboard peripherals/modules through a
+        multiplexer that allows only one peripheral alternate function (AF) connected
+  to an IO pin at a time. In this way, there can be no conflict between peripherals 
+  sharing the same IO pin. 
+  
+    (+) All ports have external interrupt/event capability. To use external interrupt
+  lines, the port must be configured in input mode. All available GPIO pins are 
+  connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+  
+    (+) The external interrupt/event controller consists of up to 28 edge detectors
+        (16 lines are connected to GPIO) for generating event/interrupt requests (each
+        input line can be independently configured to select the type (interrupt or event)
+        and the corresponding trigger event (rising or falling or both). Each line can
+        also be masked independently.
+   
+            ##### How to use this driver #####
+  ==============================================================================  
+  [..]
+   (#) Enable the GPIO AHB clock using the following function : __HAL_RCC_GPIOx_CLK_ENABLE(). 
+                                    
+   (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+       (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+       (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef 
+            structure.
+       (++) In case of Output or alternate function mode selection: the speed is 
+             configured through "Speed" member from GPIO_InitTypeDef structure.
+        (++) In alternate mode is selection, the alternate function connected to the IO
+             is configured through "Alternate" member from GPIO_InitTypeDef structure.
+       (++) Analog mode is required when a pin is to be used as ADC channel 
+            or DAC output.
+       (++) In case of external interrupt/event selection the "Mode" member from 
+            GPIO_InitTypeDef structure select the type (interrupt or event) and 
+            the corresponding trigger event (rising or falling or both).
+  
+   (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority 
+       mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+       HAL_NVIC_EnableIRQ().
+  
+   (#) HAL_GPIO_DeInit allows to set register values to their reset value. It's also 
+       recommended to use it to unconfigure pin which was used as an external interrupt 
+       or in event mode. That's the only way to reset corresponding bit in EXTI & SYSCFG 
+       registers.
+  
+   (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+  
+   (#) To set/reset the level of a pin configured in output mode use 
+       HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+  
+   (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+  
+   (#) During and just after reset, the alternate functions are not 
+       active and the GPIO pins are configured in input floating mode (except JTAG
+       pins).
+  
+   (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose 
+       (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has 
+       priority over the GPIO function.
+  
+   (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as 
+        general purpose PF0 and PF1, respectively, when the HSE oscillator is off.
+       The HSE has priority over the GPIO function.
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIO GPIO
+  * @brief GPIO HAL module driver
+  * @{
+  */
+
+/** MISRA C:2012 deviation rule has been granted for following rules:
+  * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..]
+  * which may be out of array bounds [..,UNKNOWN] in following APIs:
+  * HAL_GPIO_Init
+  * HAL_GPIO_DeInit
+  */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup GPIO_Private_Defines GPIO Private Defines
+  * @{
+  */
+#define GPIO_MODE             (0x00000003U)
+#define EXTI_MODE             (0x10000000U)
+#define GPIO_MODE_IT          (0x00010000U)
+#define GPIO_MODE_EVT         (0x00020000U)
+#define RISING_EDGE           (0x00100000U)
+#define FALLING_EDGE          (0x00200000U)
+#define GPIO_OUTPUT_TYPE      (0x00000010U)
+
+#define GPIO_NUMBER           (16U)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+  * @param  GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+  * @param  GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+  *         the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{ 
+  uint32_t position = 0x00u;
+  uint32_t iocurrent;
+  uint32_t temp;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+  assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+  assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+  /* Configure the port pins */
+  while (((GPIO_Init->Pin) >> position) != 0x00u)
+  {
+    /* Get current io position */
+    iocurrent = (GPIO_Init->Pin) & (1uL << position);
+
+    if (iocurrent != 0x00u)
+    {
+      /*--------------------- GPIO Mode Configuration ------------------------*/
+      /* In case of Output or Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+         (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Speed parameter */
+        assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+        /* Configure the IO Speed */
+        temp = GPIOx->OSPEEDR;
+        temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u));
+        temp |= (GPIO_Init->Speed << (position * 2u));
+        GPIOx->OSPEEDR = temp;
+
+        /* Configure the IO Output Type */
+        temp = GPIOx->OTYPER;
+        temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+        temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position);
+        GPIOx->OTYPER = temp;
+      }
+
+      /* Activate the Pull-up or Pull down resistor for the current IO */
+      temp = GPIOx->PUPDR;
+      temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u));
+      temp |= ((GPIO_Init->Pull) << (position * 2u));
+      GPIOx->PUPDR = temp;
+
+      /* In case of Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Alternate function parameters */
+        assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
+        assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+        /* Configure Alternate function mapped with the current IO */
+        temp = GPIOx->AFR[position >> 3u];
+        temp &= ~(0xFu << ((position & 0x07u) * 4u));
+        temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u));
+        GPIOx->AFR[position >> 3u] = temp;
+      }
+
+      /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+      temp = GPIOx->MODER;
+      temp &= ~(GPIO_MODER_MODER0 << (position * 2u));
+      temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u));
+      GPIOx->MODER = temp;
+
+      /*--------------------- EXTI Mode Configuration ------------------------*/
+      /* Configure the External Interrupt or event for the current IO */
+      if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+      {
+        /* Enable SYSCFG Clock */
+        __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+        temp = SYSCFG->EXTICR[position >> 2u];
+        temp &= ~(0x0FuL << (4u * (position & 0x03u)));
+        temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)));
+        SYSCFG->EXTICR[position >> 2u] = temp;
+
+        /* Clear EXTI line configuration */
+        temp = EXTI->IMR;
+        temp &= ~(iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->IMR = temp;
+
+        temp = EXTI->EMR;
+        temp &= ~(iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->EMR = temp;
+
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR;
+        temp &= ~(iocurrent);
+        if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->RTSR = temp;
+
+        temp = EXTI->FTSR;
+        temp &= ~(iocurrent);
+        if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->FTSR = temp;
+      }
+    }
+
+    position++;
+  } 
+}
+
+/**
+  * @brief  De-initialize the GPIOx peripheral registers to their default reset values.
+  * @param  GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+  * @param  GPIO_Pin specifies the port bit to be written.
+  *         This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
+{
+  uint32_t position = 0x00u;
+  uint32_t iocurrent;
+  uint32_t tmp;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Configure the port pins */
+  while ((GPIO_Pin >> position) != 0x00u)
+  {
+    /* Get current io position */
+    iocurrent = (GPIO_Pin) & (1uL << position);
+
+    if (iocurrent != 0x00u)
+    {
+      /*------------------------- EXTI Mode Configuration --------------------*/
+      /* Clear the External Interrupt or Event for the current IO */
+
+      tmp = SYSCFG->EXTICR[position >> 2u];
+      tmp &= (0x0FuL << (4u * (position & 0x03u)));
+      if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))))
+      {
+        /* Clear EXTI line configuration */
+        EXTI->IMR &= ~((uint32_t)iocurrent);
+        EXTI->EMR &= ~((uint32_t)iocurrent);
+        
+        /* Clear Rising Falling edge configuration */
+        EXTI->RTSR &= ~((uint32_t)iocurrent);
+        EXTI->FTSR &= ~((uint32_t)iocurrent);
+
+        /* Configure the External Interrupt or event for the current IO */
+        tmp = 0x0FuL << (4u * (position & 0x03u));
+        SYSCFG->EXTICR[position >> 2u] &= ~tmp;
+      }
+
+      /*------------------------- GPIO Mode Configuration --------------------*/
+      /* Configure IO Direction in Input Floating Mode */
+      GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2u));
+
+      /* Configure the default Alternate Function in current IO */
+      GPIOx->AFR[position >> 3u] &= ~(0xFu << ((uint32_t)(position & 0x07u) * 4u)) ;
+
+      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2u));
+
+      /* Configure the default value IO Output Type */
+      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+      /* Configure the default value for IO Speed */
+      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2u));
+
+    }
+
+    position++;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions 
+ *  @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
+ *
+@verbatim   
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================  
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read the specified input port pin.
+  * @param  GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+  * @param  GPIO_Pin specifies the port bit to read.
+  *         This parameter can be GPIO_PIN_x where x can be (0..15).
+  * @retval The input port pin value.
+  */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  GPIO_PinState bitstatus;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+  {
+    bitstatus = GPIO_PIN_SET;
+  }
+  else
+  {
+    bitstatus = GPIO_PIN_RESET;
+  }
+  return bitstatus;
+  }
+
+/**
+  * @brief  Set or clear the selected data port bit.
+  * @note   This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify
+  *         accesses. In this way, there is no risk of an IRQ occurring between
+  *         the read and the modify access.
+  *
+  * @param  GPIOx where x can be (A..H) to select the GPIO peripheral for STM32F0 family
+  * @param  GPIO_Pin specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @param  PinState specifies the value to be written to the selected bit.
+  *          This parameter can be one of the GPIO_PinState enum values:
+  *            @arg GPIO_PIN_RESET: to clear the port pin
+  *            @arg GPIO_PIN_SET: to set the port pin
+  * @retval None
+  */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+  if (PinState != GPIO_PIN_RESET)
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BRR = (uint32_t)GPIO_Pin;
+  }
+}
+  
+/**
+  * @brief  Toggle the specified GPIO pin.
+  * @param  GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+  * @param  GPIO_Pin specifies the pin to be toggled.
+  * @retval None
+  */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  uint32_t odr;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* get current Ouput Data Register value */
+  odr = GPIOx->ODR;
+
+  /* Set selected pins that were at low level, and reset ones that were high */
+  GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin);
+}
+
+/**
+* @brief  Locks GPIO Pins configuration registers.
+* @note   The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+*         GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+* @note   The configuration of the locked GPIO pins can no longer be modified
+*         until the next reset.
+  * @param  GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+  * @param  GPIO_Pin specifies the port bits to be locked.
+*         This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+* @retval None
+*/
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Apply lock key write sequence */
+  SET_BIT(tmp, GPIO_Pin);
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+  GPIOx->LCKR = GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Read LCKK register. This read is mandatory to complete key lock sequence */
+  tmp = GPIOx->LCKR;
+
+  /* read again in order to confirm lock is active */
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u)
+  {
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Handle EXTI interrupt request.
+  * @param  GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+  * @retval None
+  */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+  /* EXTI line interrupt detected */
+  if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u)
+  { 
+    __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+    HAL_GPIO_EXTI_Callback(GPIO_Pin);
+  }
+}
+
+/**
+  * @brief  EXTI line detection callback.
+  * @param  GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+  * @retval None
+  */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(GPIO_Pin);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+            the HAL_GPIO_EXTI_Callback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c
new file mode 100644
index 0000000..3523403
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c
@@ -0,0 +1,6646 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_i2c.c
+  * @author  MCD Application Team
+  * @brief   I2C HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Inter Integrated Circuit (I2C) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The I2C HAL driver can be used as follows:
+
+    (#) Declare a I2C_HandleTypeDef handle structure, for example:
+        I2C_HandleTypeDef  hi2c;
+
+    (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API:
+        (##) Enable the I2Cx interface clock
+        (##) I2C pins configuration
+            (+++) Enable the clock for the I2C GPIOs
+            (+++) Configure I2C pins as alternate function open-drain
+        (##) NVIC configuration if you need to use interrupt process
+            (+++) Configure the I2Cx interrupt priority
+            (+++) Enable the NVIC I2C IRQ Channel
+        (##) DMA Configuration if you need to use DMA process
+            (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+            (+++) Enable the DMAx interface clock using
+            (+++) Configure the DMA handle parameters
+            (+++) Configure the DMA Tx or Rx channel
+            (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+                  the DMA Tx or Rx channel
+
+    (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+        Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
+
+    (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware
+        (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API.
+
+    (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady()
+
+    (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+    *** Polling mode IO operation ***
+    =================================
+    [..]
+      (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit()
+      (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive()
+      (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit()
+      (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive()
+
+    *** Polling mode IO MEM operation ***
+    =====================================
+    [..]
+      (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write()
+      (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read()
+
+
+    *** Interrupt mode IO operation ***
+    ===================================
+    [..]
+      (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT()
+      (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
+      (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT()
+      (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
+      (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT()
+      (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
+      (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT()
+      (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
+      (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+      (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
+      (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
+      (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
+           This action will inform Master to generate a Stop condition to discard the communication.
+
+
+    *** Interrupt mode or DMA mode IO sequential operation ***
+    ==========================================================
+    [..]
+      (@) These interfaces allow to manage a sequential transfer with a repeated start condition
+          when a direction change during transfer
+    [..]
+      (+) A specific option field manage the different steps of a sequential transfer
+      (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below:
+      (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode
+      (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
+                            and data to transfer without a final stop condition
+      (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
+                            and data to transfer without a final stop condition, an then permit a call the same master sequential interface
+                            several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT()
+                            or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA())
+      (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
+                            and with new data to transfer if the direction change or manage only the new data to transfer
+                            if no direction change and without a final stop condition in both cases
+      (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
+                            and with new data to transfer if the direction change or manage only the new data to transfer
+                            if no direction change and with a final stop condition in both cases
+      (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential
+                            interface several times (link with option I2C_FIRST_AND_NEXT_FRAME).
+                            Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
+                              or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
+                              or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
+                              or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME).
+                            Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit
+                              without stopping the communication and so generate a restart condition.
+      (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential
+                            interface.
+                            Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
+                              or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
+                              or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
+                              or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME).
+                            Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition.
+
+      (+) Different sequential I2C interfaces are listed below:
+      (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT()
+            or using @ref HAL_I2C_Master_Seq_Transmit_DMA()
+      (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
+      (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT()
+            or using @ref HAL_I2C_Master_Seq_Receive_DMA()
+      (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
+      (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
+      (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
+      (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT()
+      (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can
+           add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+      (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback()
+      (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT()
+            or using @ref HAL_I2C_Slave_Seq_Transmit_DMA()
+      (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
+      (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT()
+            or using @ref HAL_I2C_Slave_Seq_Receive_DMA()
+      (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
+      (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+      (++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
+           This action will inform Master to generate a Stop condition to discard the communication.
+
+    *** Interrupt mode IO MEM operation ***
+    =======================================
+    [..]
+      (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
+          @ref HAL_I2C_Mem_Write_IT()
+      (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
+      (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
+          @ref HAL_I2C_Mem_Read_IT()
+      (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
+      (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+
+    *** DMA mode IO operation ***
+    ==============================
+    [..]
+      (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
+          @ref HAL_I2C_Master_Transmit_DMA()
+      (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
+      (+) Receive in master mode an amount of data in non-blocking mode (DMA) using
+          @ref HAL_I2C_Master_Receive_DMA()
+      (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
+      (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
+          @ref HAL_I2C_Slave_Transmit_DMA()
+      (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
+      (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
+          @ref HAL_I2C_Slave_Receive_DMA()
+      (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
+      (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+      (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
+      (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
+      (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
+           This action will inform Master to generate a Stop condition to discard the communication.
+
+    *** DMA mode IO MEM operation ***
+    =================================
+    [..]
+      (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
+          @ref HAL_I2C_Mem_Write_DMA()
+      (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
+      (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
+          @ref HAL_I2C_Mem_Read_DMA()
+      (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
+      (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+
+
+     *** I2C HAL driver macros list ***
+     ==================================
+     [..]
+       Below the list of most used macros in I2C HAL driver.
+
+      (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral
+      (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral
+      (+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode
+      (+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not
+      (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
+      (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+      (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+     *** Callback registration ***
+     =============================================
+    [..]
+     The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1
+     allows the user to configure dynamically the driver callbacks.
+     Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback()
+     to register an interrupt callback.
+    [..]
+     Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks:
+       (+) MasterTxCpltCallback : callback for Master transmission end of transfer.
+       (+) MasterRxCpltCallback : callback for Master reception end of transfer.
+       (+) SlaveTxCpltCallback  : callback for Slave transmission end of transfer.
+       (+) SlaveRxCpltCallback  : callback for Slave reception end of transfer.
+       (+) ListenCpltCallback   : callback for end of listen mode.
+       (+) MemTxCpltCallback    : callback for Memory transmission end of transfer.
+       (+) MemRxCpltCallback    : callback for Memory reception end of transfer.
+       (+) ErrorCallback        : callback for error detection.
+       (+) AbortCpltCallback    : callback for abort completion process.
+       (+) MspInitCallback      : callback for Msp Init.
+       (+) MspDeInitCallback    : callback for Msp DeInit.
+     This function takes as parameters the HAL peripheral handle, the Callback ID
+     and a pointer to the user callback function.
+    [..]
+     For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback().
+    [..]
+     Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default
+     weak function.
+     @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle,
+     and the Callback ID.
+     This function allows to reset following callbacks:
+       (+) MasterTxCpltCallback : callback for Master transmission end of transfer.
+       (+) MasterRxCpltCallback : callback for Master reception end of transfer.
+       (+) SlaveTxCpltCallback  : callback for Slave transmission end of transfer.
+       (+) SlaveRxCpltCallback  : callback for Slave reception end of transfer.
+       (+) ListenCpltCallback   : callback for end of listen mode.
+       (+) MemTxCpltCallback    : callback for Memory transmission end of transfer.
+       (+) MemRxCpltCallback    : callback for Memory reception end of transfer.
+       (+) ErrorCallback        : callback for error detection.
+       (+) AbortCpltCallback    : callback for abort completion process.
+       (+) MspInitCallback      : callback for Msp Init.
+       (+) MspDeInitCallback    : callback for Msp DeInit.
+    [..]
+     For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback().
+    [..]
+     By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET
+     all callbacks are set to the corresponding weak functions:
+     examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback().
+     Exception done for MspInit and MspDeInit functions that are
+     reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when
+     these callbacks are null (not registered beforehand).
+     If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit()
+     keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
+    [..]
+     Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only.
+     Exception done MspInit/MspDeInit functions that can be registered/unregistered
+     in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state,
+     thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+     Then, the user first registers the MspInit/MspDeInit user callbacks
+     using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit()
+     or @ref HAL_I2C_Init() function.
+    [..]
+     When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or
+     not defined, the callback registration feature is not available and all callbacks
+     are set to the corresponding weak functions.
+
+     [..]
+       (@) You can refer to the I2C HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2C I2C
+  * @brief I2C HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup I2C_Private_Define I2C Private Define
+  * @{
+  */
+#define TIMING_CLEAR_MASK   (0xF0FFFFFFU)  /*!< I2C TIMING clear register Mask */
+#define I2C_TIMEOUT_ADDR    (10000U)       /*!< 10 s  */
+#define I2C_TIMEOUT_BUSY    (25U)          /*!< 25 ms */
+#define I2C_TIMEOUT_DIR     (25U)          /*!< 25 ms */
+#define I2C_TIMEOUT_RXNE    (25U)          /*!< 25 ms */
+#define I2C_TIMEOUT_STOPF   (25U)          /*!< 25 ms */
+#define I2C_TIMEOUT_TC      (25U)          /*!< 25 ms */
+#define I2C_TIMEOUT_TCR     (25U)          /*!< 25 ms */
+#define I2C_TIMEOUT_TXIS    (25U)          /*!< 25 ms */
+#define I2C_TIMEOUT_FLAG    (25U)          /*!< 25 ms */
+
+#define MAX_NBYTE_SIZE      255U
+#define SlaveAddr_SHIFT     7U
+#define SlaveAddr_MSK       0x06U
+
+/* Private define for @ref PreviousState usage */
+#define I2C_STATE_MSK             ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits            */
+#define I2C_STATE_NONE            ((uint32_t)(HAL_I2C_MODE_NONE))                                                        /*!< Default Value                                          */
+#define I2C_STATE_MASTER_BUSY_TX  ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER))            /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX  ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER))            /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX   ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE))             /*!< Slave Busy TX, combinaison of State LSB and Mode enum  */
+#define I2C_STATE_SLAVE_BUSY_RX   ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE))             /*!< Slave Busy RX, combinaison of State LSB and Mode enum  */
+#define I2C_STATE_MEM_BUSY_TX     ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM))               /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_RX     ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM))               /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+
+
+/* Private define to centralize the enable/disable of Interrupts */
+#define I2C_XFER_TX_IT          (uint16_t)(0x0001U)   /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */
+#define I2C_XFER_RX_IT          (uint16_t)(0x0002U)   /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */
+#define I2C_XFER_LISTEN_IT      (uint16_t)(0x8000U)   /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */
+
+#define I2C_XFER_ERROR_IT       (uint16_t)(0x0010U)   /* Bit definition to manage addition of global Error and NACK treatment */
+#define I2C_XFER_CPLT_IT        (uint16_t)(0x0020U)   /* Bit definition to manage only STOP evenement */
+#define I2C_XFER_RELOAD_IT      (uint16_t)(0x0040U)   /* Bit definition to manage only Reload of NBYTE */
+
+/* Private define Sequential Transfer Options default/reset value */
+#define I2C_NO_OPTION_FRAME     (0xFFFF0000U)
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+/* Private functions to handle DMA transfer */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+/* Private functions to handle IT transfer */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode);
+
+/* Private functions to handle IT transfer */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                                uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                               uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions for I2C transfer IRQ handler */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+
+/* Private functions to handle flags during polling transfer */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status,
+                                                    uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
+static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+
+/* Private function to treat different error callback */
+static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c);
+
+/* Private function to flush TXDR register */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c);
+
+/* Private function to handle  start, restart or stop a transfer */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode,
+                               uint32_t Request);
+
+/* Private function to Convert Specific options */
+static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+  * @{
+  */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          deinitialize the I2Cx peripheral:
+
+      (+) User must Implement HAL_I2C_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_I2C_Init() to configure the selected device with
+          the selected configuration:
+        (++) Clock Timing
+        (++) Own Address 1
+        (++) Addressing mode (Master, Slave)
+        (++) Dual Addressing mode
+        (++) Own Address 2
+        (++) Own Address 2 Mask
+        (++) General call mode
+        (++) Nostretch mode
+
+      (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+          of the selected I2Cx peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the I2C according to the specified parameters
+  *         in the I2C_InitTypeDef and initialize the associated handle.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the I2C handle allocation */
+  if (hi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+  assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+  assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+  assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+  assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
+  assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+  assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+  if (hi2c->State == HAL_I2C_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hi2c->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    /* Init the I2C Callback settings */
+    hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */
+    hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */
+    hi2c->SlaveTxCpltCallback  = HAL_I2C_SlaveTxCpltCallback;  /* Legacy weak SlaveTxCpltCallback  */
+    hi2c->SlaveRxCpltCallback  = HAL_I2C_SlaveRxCpltCallback;  /* Legacy weak SlaveRxCpltCallback  */
+    hi2c->ListenCpltCallback   = HAL_I2C_ListenCpltCallback;   /* Legacy weak ListenCpltCallback   */
+    hi2c->MemTxCpltCallback    = HAL_I2C_MemTxCpltCallback;    /* Legacy weak MemTxCpltCallback    */
+    hi2c->MemRxCpltCallback    = HAL_I2C_MemRxCpltCallback;    /* Legacy weak MemRxCpltCallback    */
+    hi2c->ErrorCallback        = HAL_I2C_ErrorCallback;        /* Legacy weak ErrorCallback        */
+    hi2c->AbortCpltCallback    = HAL_I2C_AbortCpltCallback;    /* Legacy weak AbortCpltCallback    */
+    hi2c->AddrCallback         = HAL_I2C_AddrCallback;         /* Legacy weak AddrCallback         */
+
+    if (hi2c->MspInitCallback == NULL)
+    {
+      hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit  */
+    }
+
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    hi2c->MspInitCallback(hi2c);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_I2C_MspInit(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+
+  /* Disable the selected I2C peripheral */
+  __HAL_I2C_DISABLE(hi2c);
+
+  /*---------------------------- I2Cx TIMINGR Configuration ------------------*/
+  /* Configure I2Cx: Frequency range */
+  hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+  /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+  /* Disable Own Address1 before set the Own Address1 configuration */
+  hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+
+  /* Configure I2Cx: Own Address1 and ack own address1 mode */
+  if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+  {
+    hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
+  }
+  else /* I2C_ADDRESSINGMODE_10BIT */
+  {
+    hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
+  }
+
+  /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+  /* Configure I2Cx: Addressing Master mode */
+  if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+  {
+    hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+  }
+  /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+  hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+
+  /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+  /* Disable Own Address2 before set the Own Address2 configuration */
+  hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE;
+
+  /* Configure I2Cx: Dual mode and Own Address2 */
+  hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+
+  /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+  /* Configure I2Cx: Generalcall and NoStretch mode */
+  hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+  /* Enable the selected I2C peripheral */
+  __HAL_I2C_ENABLE(hi2c);
+
+  hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+  hi2c->State = HAL_I2C_STATE_READY;
+  hi2c->PreviousState = I2C_STATE_NONE;
+  hi2c->Mode = HAL_I2C_MODE_NONE;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitialize the I2C peripheral.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the I2C handle allocation */
+  if (hi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+
+  /* Disable the I2C Peripheral Clock */
+  __HAL_I2C_DISABLE(hi2c);
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+  if (hi2c->MspDeInitCallback == NULL)
+  {
+    hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit  */
+  }
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  hi2c->MspDeInitCallback(hi2c);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_I2C_MspDeInit(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+
+  hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+  hi2c->State = HAL_I2C_STATE_RESET;
+  hi2c->PreviousState = I2C_STATE_NONE;
+  hi2c->Mode = HAL_I2C_MODE_NONE;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Initialize the I2C MSP.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief DeInitialize the I2C MSP.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_MspDeInit could be implemented in the user file
+   */
+}
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  Register a User I2C Callback
+  *         To be used instead of the weak predefined callback
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  CallbackID ID of the callback to be registered
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID
+  *          @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID
+  *          @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID
+  *          @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID
+  *          @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID
+  *          @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID
+  * @param  pCallback pointer to the Callback function
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
+                                           pI2C_CallbackTypeDef pCallback)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if (pCallback == NULL)
+  {
+    /* Update the error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+    return HAL_ERROR;
+  }
+  /* Process locked */
+  __HAL_LOCK(hi2c);
+
+  if (HAL_I2C_STATE_READY == hi2c->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_I2C_MASTER_TX_COMPLETE_CB_ID :
+        hi2c->MasterTxCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_MASTER_RX_COMPLETE_CB_ID :
+        hi2c->MasterRxCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID :
+        hi2c->SlaveTxCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID :
+        hi2c->SlaveRxCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_LISTEN_COMPLETE_CB_ID :
+        hi2c->ListenCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_MEM_TX_COMPLETE_CB_ID :
+        hi2c->MemTxCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_MEM_RX_COMPLETE_CB_ID :
+        hi2c->MemRxCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_ERROR_CB_ID :
+        hi2c->ErrorCallback = pCallback;
+        break;
+
+      case HAL_I2C_ABORT_CB_ID :
+        hi2c->AbortCpltCallback = pCallback;
+        break;
+
+      case HAL_I2C_MSPINIT_CB_ID :
+        hi2c->MspInitCallback = pCallback;
+        break;
+
+      case HAL_I2C_MSPDEINIT_CB_ID :
+        hi2c->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Update the error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_I2C_STATE_RESET == hi2c->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_I2C_MSPINIT_CB_ID :
+        hi2c->MspInitCallback = pCallback;
+        break;
+
+      case HAL_I2C_MSPDEINIT_CB_ID :
+        hi2c->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Update the error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Update the error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+  return status;
+}
+
+/**
+  * @brief  Unregister an I2C Callback
+  *         I2C callback is redirected to the weak predefined callback
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  CallbackID ID of the callback to be unregistered
+  *         This parameter can be one of the following values:
+  *         This parameter can be one of the following values:
+  *          @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID
+  *          @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID
+  *          @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID
+  *          @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID
+  *          @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID
+  *          @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID
+  *          @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process locked */
+  __HAL_LOCK(hi2c);
+
+  if (HAL_I2C_STATE_READY == hi2c->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_I2C_MASTER_TX_COMPLETE_CB_ID :
+        hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */
+        break;
+
+      case HAL_I2C_MASTER_RX_COMPLETE_CB_ID :
+        hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */
+        break;
+
+      case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID :
+        hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback;   /* Legacy weak SlaveTxCpltCallback  */
+        break;
+
+      case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID :
+        hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback;   /* Legacy weak SlaveRxCpltCallback  */
+        break;
+
+      case HAL_I2C_LISTEN_COMPLETE_CB_ID :
+        hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback;     /* Legacy weak ListenCpltCallback   */
+        break;
+
+      case HAL_I2C_MEM_TX_COMPLETE_CB_ID :
+        hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback;       /* Legacy weak MemTxCpltCallback    */
+        break;
+
+      case HAL_I2C_MEM_RX_COMPLETE_CB_ID :
+        hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback;       /* Legacy weak MemRxCpltCallback    */
+        break;
+
+      case HAL_I2C_ERROR_CB_ID :
+        hi2c->ErrorCallback = HAL_I2C_ErrorCallback;               /* Legacy weak ErrorCallback        */
+        break;
+
+      case HAL_I2C_ABORT_CB_ID :
+        hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback;       /* Legacy weak AbortCpltCallback    */
+        break;
+
+      case HAL_I2C_MSPINIT_CB_ID :
+        hi2c->MspInitCallback = HAL_I2C_MspInit;                   /* Legacy weak MspInit              */
+        break;
+
+      case HAL_I2C_MSPDEINIT_CB_ID :
+        hi2c->MspDeInitCallback = HAL_I2C_MspDeInit;               /* Legacy weak MspDeInit            */
+        break;
+
+      default :
+        /* Update the error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_I2C_STATE_RESET == hi2c->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_I2C_MSPINIT_CB_ID :
+        hi2c->MspInitCallback = HAL_I2C_MspInit;                   /* Legacy weak MspInit              */
+        break;
+
+      case HAL_I2C_MSPDEINIT_CB_ID :
+        hi2c->MspDeInitCallback = HAL_I2C_MspDeInit;               /* Legacy weak MspDeInit            */
+        break;
+
+      default :
+        /* Update the error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Update the error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+  return status;
+}
+
+/**
+  * @brief  Register the Slave Address Match I2C Callback
+  *         To be used instead of the weak HAL_I2C_AddrCallback() predefined callback
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pCallback pointer to the Address Match Callback function
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if (pCallback == NULL)
+  {
+    /* Update the error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+    return HAL_ERROR;
+  }
+  /* Process locked */
+  __HAL_LOCK(hi2c);
+
+  if (HAL_I2C_STATE_READY == hi2c->State)
+  {
+    hi2c->AddrCallback = pCallback;
+  }
+  else
+  {
+    /* Update the error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+  return status;
+}
+
+/**
+  * @brief  UnRegister the Slave Address Match I2C Callback
+  *         Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process locked */
+  __HAL_LOCK(hi2c);
+
+  if (HAL_I2C_STATE_READY == hi2c->State)
+  {
+    hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback  */
+  }
+  else
+  {
+    /* Update the error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+  return status;
+}
+
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
+  *  @brief   Data transfers functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the I2C data
+    transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode.
+            The status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode : The communication is performed using Interrupts
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the
+            dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_I2C_Master_Transmit()
+        (++) HAL_I2C_Master_Receive()
+        (++) HAL_I2C_Slave_Transmit()
+        (++) HAL_I2C_Slave_Receive()
+        (++) HAL_I2C_Mem_Write()
+        (++) HAL_I2C_Mem_Read()
+        (++) HAL_I2C_IsDeviceReady()
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_I2C_Master_Transmit_IT()
+        (++) HAL_I2C_Master_Receive_IT()
+        (++) HAL_I2C_Slave_Transmit_IT()
+        (++) HAL_I2C_Slave_Receive_IT()
+        (++) HAL_I2C_Mem_Write_IT()
+        (++) HAL_I2C_Mem_Read_IT()
+        (++) HAL_I2C_Master_Seq_Transmit_IT()
+        (++) HAL_I2C_Master_Seq_Receive_IT()
+        (++) HAL_I2C_Slave_Seq_Transmit_IT()
+        (++) HAL_I2C_Slave_Seq_Receive_IT()
+        (++) HAL_I2C_EnableListen_IT()
+        (++) HAL_I2C_DisableListen_IT()
+        (++) HAL_I2C_Master_Abort_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_I2C_Master_Transmit_DMA()
+        (++) HAL_I2C_Master_Receive_DMA()
+        (++) HAL_I2C_Slave_Transmit_DMA()
+        (++) HAL_I2C_Slave_Receive_DMA()
+        (++) HAL_I2C_Mem_Write_DMA()
+        (++) HAL_I2C_Mem_Read_DMA()
+        (++) HAL_I2C_Master_Seq_Transmit_DMA()
+        (++) HAL_I2C_Master_Seq_Receive_DMA()
+        (++) HAL_I2C_Slave_Seq_Transmit_DMA()
+        (++) HAL_I2C_Slave_Seq_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_I2C_MasterTxCpltCallback()
+        (++) HAL_I2C_MasterRxCpltCallback()
+        (++) HAL_I2C_SlaveTxCpltCallback()
+        (++) HAL_I2C_SlaveRxCpltCallback()
+        (++) HAL_I2C_MemTxCpltCallback()
+        (++) HAL_I2C_MemRxCpltCallback()
+        (++) HAL_I2C_AddrCallback()
+        (++) HAL_I2C_ListenCpltCallback()
+        (++) HAL_I2C_ErrorCallback()
+        (++) HAL_I2C_AbortCpltCallback()
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmits in master mode an amount of data in blocking mode.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
+                                          uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode      = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr  = pData;
+    hi2c->XferCount = Size;
+    hi2c->XferISR   = NULL;
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+    }
+
+    while (hi2c->XferCount > 0U)
+    {
+      /* Wait until TXIS flag is set */
+      if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+      {
+        return HAL_ERROR;
+      }
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = *hi2c->pBuffPtr;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferCount--;
+      hi2c->XferSize--;
+
+      if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
+      {
+        /* Wait until TCR flag is set */
+        if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+        {
+          return HAL_ERROR;
+        }
+
+        if (hi2c->XferCount > MAX_NBYTE_SIZE)
+        {
+          hi2c->XferSize = MAX_NBYTE_SIZE;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+        }
+        else
+        {
+          hi2c->XferSize = hi2c->XferCount;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+        }
+      }
+    }
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is set */
+    if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode  = HAL_I2C_MODE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives in master mode an amount of data in blocking mode.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
+                                         uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode      = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr  = pData;
+    hi2c->XferCount = Size;
+    hi2c->XferISR   = NULL;
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+    }
+
+    while (hi2c->XferCount > 0U)
+    {
+      /* Wait until RXNE flag is set */
+      if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+      {
+        return HAL_ERROR;
+      }
+
+      /* Read data from RXDR */
+      *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferSize--;
+      hi2c->XferCount--;
+
+      if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
+      {
+        /* Wait until TCR flag is set */
+        if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+        {
+          return HAL_ERROR;
+        }
+
+        if (hi2c->XferCount > MAX_NBYTE_SIZE)
+        {
+          hi2c->XferSize = MAX_NBYTE_SIZE;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+        }
+        else
+        {
+          hi2c->XferSize = hi2c->XferCount;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+        }
+      }
+    }
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is set */
+    if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode  = HAL_I2C_MODE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmits in slave mode an amount of data in blocking mode.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode      = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr  = pData;
+    hi2c->XferCount = Size;
+    hi2c->XferISR   = NULL;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Wait until ADDR flag is set */
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_ERROR;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+    /* If 10bit addressing mode is selected */
+    if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+    {
+      /* Wait until ADDR flag is set */
+      if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+        return HAL_ERROR;
+      }
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+    }
+
+    /* Wait until DIR flag is set Transmitter mode */
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_ERROR;
+    }
+
+    while (hi2c->XferCount > 0U)
+    {
+      /* Wait until TXIS flag is set */
+      if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+        return HAL_ERROR;
+      }
+
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = *hi2c->pBuffPtr;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferCount--;
+    }
+
+    /* Wait until STOP flag is set */
+    if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+      if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Normal use case for Transmitter mode */
+        /* A NACK is generated to confirm the end of transfer */
+        hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+      }
+      else
+      {
+        return HAL_ERROR;
+      }
+    }
+
+    /* Clear STOP flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+    /* Wait until BUSY flag is reset */
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_ERROR;
+    }
+
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode  = HAL_I2C_MODE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in blocking mode
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode      = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr  = pData;
+    hi2c->XferCount = Size;
+    hi2c->XferISR   = NULL;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Wait until ADDR flag is set */
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_ERROR;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+    /* Wait until DIR flag is reset Receiver mode */
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_ERROR;
+    }
+
+    while (hi2c->XferCount > 0U)
+    {
+      /* Wait until RXNE flag is set */
+      if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+        /* Store Last receive data if any */
+        if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+        {
+          /* Read data from RXDR */
+          *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+          /* Increment Buffer pointer */
+          hi2c->pBuffPtr++;
+
+          hi2c->XferCount--;
+        }
+
+        return HAL_ERROR;
+      }
+
+      /* Read data from RXDR */
+      *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferCount--;
+    }
+
+    /* Wait until STOP flag is set */
+    if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_ERROR;
+    }
+
+    /* Clear STOP flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+    /* Wait until BUSY flag is reset */
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_ERROR;
+    }
+
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode  = HAL_I2C_MODE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in non-blocking mode with Interrupt
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                             uint16_t Size)
+{
+  uint32_t xfermode;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode        = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_IT;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+    I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in non-blocking mode with Interrupt
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  uint32_t xfermode;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode        = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_IT;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+    I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in non-blocking mode with Interrupt
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode        = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Slave_ISR_IT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in non-blocking mode with Interrupt
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode        = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Slave_ISR_IT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in non-blocking mode with DMA
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                              uint16_t Size)
+{
+  uint32_t xfermode;
+  HAL_StatusTypeDef dmaxferstatus;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode        = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_DMA;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    if (hi2c->XferSize > 0U)
+    {
+      if (hi2c->hdmatx != NULL)
+      {
+        /* Set the I2C DMA transfer complete callback */
+        hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+        /* Set the DMA error callback */
+        hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+        /* Set the unused DMA callbacks to NULL */
+        hi2c->hdmatx->XferHalfCpltCallback = NULL;
+        hi2c->hdmatx->XferAbortCallback = NULL;
+
+        /* Enable the DMA channel */
+        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+
+      if (dmaxferstatus == HAL_OK)
+      {
+        /* Send Slave Address */
+        /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+        I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+        /* Update XferCount value */
+        hi2c->XferCount -= hi2c->XferSize;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        /* Note : The I2C interrupts must be enabled after unlocking current process
+                  to avoid the risk of I2C interrupt handle execution before current
+                  process unlock */
+        /* Enable ERR and NACK interrupts */
+        I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Update Transfer ISR function pointer */
+      hi2c->XferISR = I2C_Master_ISR_IT;
+
+      /* Send Slave Address */
+      /* Set NBYTES to write and generate START condition */
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+      /* possible to enable all of these */
+      /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in non-blocking mode with DMA
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                             uint16_t Size)
+{
+  uint32_t xfermode;
+  HAL_StatusTypeDef dmaxferstatus;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode        = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_DMA;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    if (hi2c->XferSize > 0U)
+    {
+      if (hi2c->hdmarx != NULL)
+      {
+        /* Set the I2C DMA transfer complete callback */
+        hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+        /* Set the DMA error callback */
+        hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+        /* Set the unused DMA callbacks to NULL */
+        hi2c->hdmarx->XferHalfCpltCallback = NULL;
+        hi2c->hdmarx->XferAbortCallback = NULL;
+
+        /* Enable the DMA channel */
+        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+
+      if (dmaxferstatus == HAL_OK)
+      {
+        /* Send Slave Address */
+        /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+        I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+        /* Update XferCount value */
+        hi2c->XferCount -= hi2c->XferSize;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        /* Note : The I2C interrupts must be enabled after unlocking current process
+                  to avoid the risk of I2C interrupt handle execution before current
+                  process unlock */
+        /* Enable ERR and NACK interrupts */
+        I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Update Transfer ISR function pointer */
+      hi2c->XferISR = I2C_Master_ISR_IT;
+
+      /* Send Slave Address */
+      /* Set NBYTES to read and generate START condition */
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+      /* possible to enable all of these */
+      /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in non-blocking mode with DMA
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  HAL_StatusTypeDef dmaxferstatus;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode        = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Slave_ISR_DMA;
+
+    if (hi2c->hdmatx != NULL)
+    {
+      /* Set the I2C DMA transfer complete callback */
+      hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+      /* Set the DMA error callback */
+      hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+      /* Set the unused DMA callbacks to NULL */
+      hi2c->hdmatx->XferHalfCpltCallback = NULL;
+      hi2c->hdmatx->XferAbortCallback = NULL;
+
+      /* Enable the DMA channel */
+      dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (dmaxferstatus == HAL_OK)
+    {
+      /* Enable Address Acknowledge */
+      hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR, STOP, NACK, ADDR interrupts */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+      /* Enable DMA Request */
+      hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in non-blocking mode with DMA
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  HAL_StatusTypeDef dmaxferstatus;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode        = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Slave_ISR_DMA;
+
+    if (hi2c->hdmarx != NULL)
+    {
+      /* Set the I2C DMA transfer complete callback */
+      hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+      /* Set the DMA error callback */
+      hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+      /* Set the unused DMA callbacks to NULL */
+      hi2c->hdmarx->XferHalfCpltCallback = NULL;
+      hi2c->hdmarx->XferAbortCallback = NULL;
+
+      /* Enable the DMA channel */
+      dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (dmaxferstatus == HAL_OK)
+    {
+      /* Enable Address Acknowledge */
+      hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR, STOP, NACK, ADDR interrupts */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+      /* Enable DMA Request */
+      hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in blocking mode to a specific memory address
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                    uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode      = HAL_I2C_MODE_MEM;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr  = pData;
+    hi2c->XferCount = Size;
+    hi2c->XferISR   = NULL;
+
+    /* Send Slave Address and Memory Address */
+    if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      return HAL_ERROR;
+    }
+
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+    }
+
+    do
+    {
+      /* Wait until TXIS flag is set */
+      if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+      {
+        return HAL_ERROR;
+      }
+
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = *hi2c->pBuffPtr;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferCount--;
+      hi2c->XferSize--;
+
+      if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
+      {
+        /* Wait until TCR flag is set */
+        if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+        {
+          return HAL_ERROR;
+        }
+
+        if (hi2c->XferCount > MAX_NBYTE_SIZE)
+        {
+          hi2c->XferSize = MAX_NBYTE_SIZE;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+        }
+        else
+        {
+          hi2c->XferSize = hi2c->XferCount;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+        }
+      }
+
+    } while (hi2c->XferCount > 0U);
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode  = HAL_I2C_MODE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in blocking mode from a specific memory address
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                   uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode      = HAL_I2C_MODE_MEM;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr  = pData;
+    hi2c->XferCount = Size;
+    hi2c->XferISR   = NULL;
+
+    /* Send Slave Address and Memory Address */
+    if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      return HAL_ERROR;
+    }
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+    }
+
+    do
+    {
+      /* Wait until RXNE flag is set */
+      if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
+      {
+        return HAL_ERROR;
+      }
+
+      /* Read data from RXDR */
+      *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferSize--;
+      hi2c->XferCount--;
+
+      if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
+      {
+        /* Wait until TCR flag is set */
+        if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+        {
+          return HAL_ERROR;
+        }
+
+        if (hi2c->XferCount > MAX_NBYTE_SIZE)
+        {
+          hi2c->XferSize = MAX_NBYTE_SIZE;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+        }
+        else
+        {
+          hi2c->XferSize = hi2c->XferCount;
+          I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+        }
+      }
+    } while (hi2c->XferCount > 0U);
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode  = HAL_I2C_MODE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in non-blocking mode with Interrupt to a specific memory address
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                       uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tickstart;
+  uint32_t xfermode;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode        = HAL_I2C_MODE_MEM;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_IT;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    /* Send Slave Address and Memory Address */
+    if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      return HAL_ERROR;
+    }
+
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+    I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in non-blocking mode with Interrupt from a specific memory address
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                      uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tickstart;
+  uint32_t xfermode;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode        = HAL_I2C_MODE_MEM;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_IT;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    /* Send Slave Address and Memory Address */
+    if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      return HAL_ERROR;
+    }
+
+    /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+    I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in non-blocking mode with DMA to a specific memory address
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                        uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tickstart;
+  uint32_t xfermode;
+  HAL_StatusTypeDef dmaxferstatus;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode        = HAL_I2C_MODE_MEM;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_DMA;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    /* Send Slave Address and Memory Address */
+    if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      return HAL_ERROR;
+    }
+
+
+    if (hi2c->hdmatx != NULL)
+    {
+      /* Set the I2C DMA transfer complete callback */
+      hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+      /* Set the DMA error callback */
+      hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+      /* Set the unused DMA callbacks to NULL */
+      hi2c->hdmatx->XferHalfCpltCallback = NULL;
+      hi2c->hdmatx->XferAbortCallback = NULL;
+
+      /* Enable the DMA channel */
+      dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_READY;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (dmaxferstatus == HAL_OK)
+    {
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+      /* Update XferCount value */
+      hi2c->XferCount -= hi2c->XferSize;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR and NACK interrupts */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+      /* Enable DMA Request */
+      hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_READY;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Reads an amount of data in non-blocking mode with DMA from a specific memory address.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be read
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                       uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tickstart;
+  uint32_t xfermode;
+  HAL_StatusTypeDef dmaxferstatus;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Init tickstart for timeout management*/
+    tickstart = HAL_GetTick();
+
+    hi2c->State       = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode        = HAL_I2C_MODE_MEM;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->XferISR     = I2C_Master_ISR_DMA;
+
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = I2C_AUTOEND_MODE;
+    }
+
+    /* Send Slave Address and Memory Address */
+    if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      return HAL_ERROR;
+    }
+
+    if (hi2c->hdmarx != NULL)
+    {
+      /* Set the I2C DMA transfer complete callback */
+      hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+      /* Set the DMA error callback */
+      hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+      /* Set the unused DMA callbacks to NULL */
+      hi2c->hdmarx->XferHalfCpltCallback = NULL;
+      hi2c->hdmarx->XferAbortCallback = NULL;
+
+      /* Enable the DMA channel */
+      dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_READY;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (dmaxferstatus == HAL_OK)
+    {
+      /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+      /* Update XferCount value */
+      hi2c->XferCount -= hi2c->XferSize;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR and NACK interrupts */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+      /* Enable DMA Request */
+      hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_READY;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Checks if target device is ready for communication.
+  * @note   This function is used with Memory devices
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  Trials Number of trials
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+  uint32_t tickstart;
+
+  __IO uint32_t I2C_Trials = 0UL;
+
+  FlagStatus tmp1;
+  FlagStatus tmp2;
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    do
+    {
+      /* Generate Start */
+      hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress);
+
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is set or a NACK flag is set*/
+      tickstart = HAL_GetTick();
+
+      tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF);
+      tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+
+      while ((tmp1 == RESET) && (tmp2 == RESET))
+      {
+        if (Timeout != HAL_MAX_DELAY)
+        {
+          if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+          {
+            /* Update I2C state */
+            hi2c->State = HAL_I2C_STATE_READY;
+
+            /* Update I2C error code */
+            hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hi2c);
+
+            return HAL_ERROR;
+          }
+        }
+
+        tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF);
+        tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+      }
+
+      /* Check if the NACKF flag has not been set */
+      if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
+      {
+        /* Wait until STOPF flag is reset */
+        if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+        {
+          return HAL_ERROR;
+        }
+
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+        /* Device is ready */
+        hi2c->State = HAL_I2C_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_OK;
+      }
+      else
+      {
+        /* Wait until STOPF flag is reset */
+        if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+        {
+          return HAL_ERROR;
+        }
+
+        /* Clear NACK Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+        /* Clear STOP Flag, auto generated with autoend*/
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      }
+
+      /* Check if the maximum allowed number of trials has been reached */
+      if (I2C_Trials == Trials)
+      {
+        /* Generate Stop */
+        hi2c->Instance->CR2 |= I2C_CR2_STOP;
+
+        /* Wait until STOPF flag is reset */
+        if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+        {
+          return HAL_ERROR;
+        }
+
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      }
+
+      /* Increment Trials */
+      I2C_Trials++;
+    } while (I2C_Trials < Trials);
+
+    /* Update I2C state */
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Update I2C error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt.
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                 uint16_t Size, uint32_t XferOptions)
+{
+  uint32_t xfermode;
+  uint32_t xferrequest = I2C_GENERATE_START_WRITE;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode      = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Master_ISR_IT;
+
+    /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = hi2c->XferOptions;
+    }
+
+    /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+    /* Mean Previous state is same as current state */
+    if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+    {
+      xferrequest = I2C_NO_STARTSTOP;
+    }
+    else
+    {
+      /* Convert OTHER_xxx XferOptions if any */
+      I2C_ConvertOtherXferOptions(hi2c);
+
+      /* Update xfermode accordingly if no reload is necessary */
+      if (hi2c->XferCount <= MAX_NBYTE_SIZE)
+      {
+        xfermode = hi2c->XferOptions;
+      }
+    }
+
+    /* Send Slave Address and set NBYTES to write */
+    I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA.
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                  uint16_t Size, uint32_t XferOptions)
+{
+  uint32_t xfermode;
+  uint32_t xferrequest = I2C_GENERATE_START_WRITE;
+  HAL_StatusTypeDef dmaxferstatus;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_TX;
+    hi2c->Mode      = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Master_ISR_DMA;
+
+    /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = hi2c->XferOptions;
+    }
+
+    /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+    /* Mean Previous state is same as current state */
+    if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+    {
+      xferrequest = I2C_NO_STARTSTOP;
+    }
+    else
+    {
+      /* Convert OTHER_xxx XferOptions if any */
+      I2C_ConvertOtherXferOptions(hi2c);
+
+      /* Update xfermode accordingly if no reload is necessary */
+      if (hi2c->XferCount <= MAX_NBYTE_SIZE)
+      {
+        xfermode = hi2c->XferOptions;
+      }
+    }
+
+    if (hi2c->XferSize > 0U)
+    {
+      if (hi2c->hdmatx != NULL)
+      {
+        /* Set the I2C DMA transfer complete callback */
+        hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+        /* Set the DMA error callback */
+        hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+        /* Set the unused DMA callbacks to NULL */
+        hi2c->hdmatx->XferHalfCpltCallback = NULL;
+        hi2c->hdmatx->XferAbortCallback = NULL;
+
+        /* Enable the DMA channel */
+        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+
+      if (dmaxferstatus == HAL_OK)
+      {
+        /* Send Slave Address and set NBYTES to write */
+        I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
+
+        /* Update XferCount value */
+        hi2c->XferCount -= hi2c->XferSize;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        /* Note : The I2C interrupts must be enabled after unlocking current process
+                  to avoid the risk of I2C interrupt handle execution before current
+                  process unlock */
+        /* Enable ERR and NACK interrupts */
+        I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Update Transfer ISR function pointer */
+      hi2c->XferISR = I2C_Master_ISR_IT;
+
+      /* Send Slave Address */
+      /* Set NBYTES to write and generate START condition */
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+      /* possible to enable all of these */
+      /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                uint16_t Size, uint32_t XferOptions)
+{
+  uint32_t xfermode;
+  uint32_t xferrequest = I2C_GENERATE_START_READ;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode      = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Master_ISR_IT;
+
+    /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = hi2c->XferOptions;
+    }
+
+    /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+    /* Mean Previous state is same as current state */
+    if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+    {
+      xferrequest = I2C_NO_STARTSTOP;
+    }
+    else
+    {
+      /* Convert OTHER_xxx XferOptions if any */
+      I2C_ConvertOtherXferOptions(hi2c);
+
+      /* Update xfermode accordingly if no reload is necessary */
+      if (hi2c->XferCount <= MAX_NBYTE_SIZE)
+      {
+        xfermode = hi2c->XferOptions;
+      }
+    }
+
+    /* Send Slave Address and set NBYTES to read */
+    I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                                 uint16_t Size, uint32_t XferOptions)
+{
+  uint32_t xfermode;
+  uint32_t xferrequest = I2C_GENERATE_START_READ;
+  HAL_StatusTypeDef dmaxferstatus;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_RX;
+    hi2c->Mode      = HAL_I2C_MODE_MASTER;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Master_ISR_DMA;
+
+    /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+      xfermode = I2C_RELOAD_MODE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+      xfermode = hi2c->XferOptions;
+    }
+
+    /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+    /* Mean Previous state is same as current state */
+    if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+    {
+      xferrequest = I2C_NO_STARTSTOP;
+    }
+    else
+    {
+      /* Convert OTHER_xxx XferOptions if any */
+      I2C_ConvertOtherXferOptions(hi2c);
+
+      /* Update xfermode accordingly if no reload is necessary */
+      if (hi2c->XferCount <= MAX_NBYTE_SIZE)
+      {
+        xfermode = hi2c->XferOptions;
+      }
+    }
+
+    if (hi2c->XferSize > 0U)
+    {
+      if (hi2c->hdmarx != NULL)
+      {
+        /* Set the I2C DMA transfer complete callback */
+        hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+        /* Set the DMA error callback */
+        hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+        /* Set the unused DMA callbacks to NULL */
+        hi2c->hdmarx->XferHalfCpltCallback = NULL;
+        hi2c->hdmarx->XferAbortCallback = NULL;
+
+        /* Enable the DMA channel */
+        dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+
+      if (dmaxferstatus == HAL_OK)
+      {
+        /* Send Slave Address and set NBYTES to read */
+        I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
+
+        /* Update XferCount value */
+        hi2c->XferCount -= hi2c->XferSize;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        /* Note : The I2C interrupts must be enabled after unlocking current process
+                  to avoid the risk of I2C interrupt handle execution before current
+                  process unlock */
+        /* Enable ERR and NACK interrupts */
+        I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+      }
+      else
+      {
+        /* Update I2C state */
+        hi2c->State     = HAL_I2C_STATE_READY;
+        hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+        /* Update I2C error code */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Update Transfer ISR function pointer */
+      hi2c->XferISR = I2C_Master_ISR_IT;
+
+      /* Send Slave Address */
+      /* Set NBYTES to read and generate START condition */
+      I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Note : The I2C interrupts must be enabled after unlocking current process
+                to avoid the risk of I2C interrupt handle execution before current
+                process unlock */
+      /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+      /* possible to enable all of these */
+      /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                                uint32_t XferOptions)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+    /* and then toggle the HAL slave RX state to TX state */
+    if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+    {
+      /* Disable associated Interrupts */
+      I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+      /* Abort DMA Xfer if any */
+      if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+      {
+        hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+        if (hi2c->hdmarx != NULL)
+        {
+          /* Set the I2C DMA Abort callback :
+           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+          /* Abort DMA RX */
+          if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+          {
+            /* Call Directly XferAbortCallback function in case of error */
+            hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+          }
+        }
+      }
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_TX_LISTEN;
+    hi2c->Mode      = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Slave_ISR_IT;
+
+    if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
+    {
+      /* Clear ADDR flag after prepare the transfer parameters */
+      /* This action will generate an acknowledge to the Master */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    /* REnable ADDR interrupt */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                                 uint32_t XferOptions)
+{
+  HAL_StatusTypeDef dmaxferstatus;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
+
+    /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+    /* and then toggle the HAL slave RX state to TX state */
+    if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+    {
+      /* Disable associated Interrupts */
+      I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+      if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+      {
+        /* Abort DMA Xfer if any */
+        if (hi2c->hdmarx != NULL)
+        {
+          hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+          /* Set the I2C DMA Abort callback :
+           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+          /* Abort DMA RX */
+          if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+          {
+            /* Call Directly XferAbortCallback function in case of error */
+            hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+          }
+        }
+      }
+    }
+    else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+    {
+      if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+      {
+        hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+        /* Abort DMA Xfer if any */
+        if (hi2c->hdmatx != NULL)
+        {
+          /* Set the I2C DMA Abort callback :
+           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+          /* Abort DMA TX */
+          if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+          {
+            /* Call Directly XferAbortCallback function in case of error */
+            hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+          }
+        }
+      }
+    }
+    else
+    {
+      /* Nothing to do */
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_TX_LISTEN;
+    hi2c->Mode      = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Slave_ISR_DMA;
+
+    if (hi2c->hdmatx != NULL)
+    {
+      /* Set the I2C DMA transfer complete callback */
+      hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+      /* Set the DMA error callback */
+      hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+      /* Set the unused DMA callbacks to NULL */
+      hi2c->hdmatx->XferHalfCpltCallback = NULL;
+      hi2c->hdmatx->XferAbortCallback = NULL;
+
+      /* Enable the DMA channel */
+      dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (dmaxferstatus == HAL_OK)
+    {
+      /* Update XferCount value */
+      hi2c->XferCount -= hi2c->XferSize;
+
+      /* Reset XferSize */
+      hi2c->XferSize = 0;
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
+    {
+      /* Clear ADDR flag after prepare the transfer parameters */
+      /* This action will generate an acknowledge to the Master */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    /* Enable ERR, STOP, NACK, ADDR interrupts */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                               uint32_t XferOptions)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+    /* and then toggle the HAL slave TX state to RX state */
+    if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+    {
+      /* Disable associated Interrupts */
+      I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+      if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+      {
+        hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+        /* Abort DMA Xfer if any */
+        if (hi2c->hdmatx != NULL)
+        {
+          /* Set the I2C DMA Abort callback :
+           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+          /* Abort DMA TX */
+          if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+          {
+            /* Call Directly XferAbortCallback function in case of error */
+            hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+          }
+        }
+      }
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_RX_LISTEN;
+    hi2c->Mode      = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Slave_ISR_IT;
+
+    if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
+    {
+      /* Clear ADDR flag after prepare the transfer parameters */
+      /* This action will generate an acknowledge to the Master */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    /* REnable ADDR interrupt */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA
+  * @note   This interface allow to manage repeated start condition when a direction change during transfer
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData Pointer to data buffer
+  * @param  Size Amount of data to be sent
+  * @param  XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                                uint32_t XferOptions)
+{
+  HAL_StatusTypeDef dmaxferstatus;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+  if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
+  {
+    if ((pData == NULL) || (Size == 0U))
+    {
+      hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
+      return  HAL_ERROR;
+    }
+
+    /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+    /* and then toggle the HAL slave TX state to RX state */
+    if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+    {
+      /* Disable associated Interrupts */
+      I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+      if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+      {
+        /* Abort DMA Xfer if any */
+        if (hi2c->hdmatx != NULL)
+        {
+          hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+          /* Set the I2C DMA Abort callback :
+           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+          /* Abort DMA TX */
+          if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+          {
+            /* Call Directly XferAbortCallback function in case of error */
+            hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+          }
+        }
+      }
+    }
+    else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+    {
+      if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+      {
+        hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+        /* Abort DMA Xfer if any */
+        if (hi2c->hdmarx != NULL)
+        {
+          /* Set the I2C DMA Abort callback :
+           will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+          hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+          /* Abort DMA RX */
+          if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+          {
+            /* Call Directly XferAbortCallback function in case of error */
+            hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+          }
+        }
+      }
+    }
+    else
+    {
+      /* Nothing to do */
+    }
+
+    hi2c->State     = HAL_I2C_STATE_BUSY_RX_LISTEN;
+    hi2c->Mode      = HAL_I2C_MODE_SLAVE;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+    /* Prepare transfer parameters */
+    hi2c->pBuffPtr    = pData;
+    hi2c->XferCount   = Size;
+    hi2c->XferSize    = hi2c->XferCount;
+    hi2c->XferOptions = XferOptions;
+    hi2c->XferISR     = I2C_Slave_ISR_DMA;
+
+    if (hi2c->hdmarx != NULL)
+    {
+      /* Set the I2C DMA transfer complete callback */
+      hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+      /* Set the DMA error callback */
+      hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+      /* Set the unused DMA callbacks to NULL */
+      hi2c->hdmarx->XferHalfCpltCallback = NULL;
+      hi2c->hdmarx->XferAbortCallback = NULL;
+
+      /* Enable the DMA channel */
+      dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (dmaxferstatus == HAL_OK)
+    {
+      /* Update XferCount value */
+      hi2c->XferCount -= hi2c->XferSize;
+
+      /* Reset XferSize */
+      hi2c->XferSize = 0;
+    }
+    else
+    {
+      /* Update I2C state */
+      hi2c->State     = HAL_I2C_STATE_LISTEN;
+      hi2c->Mode      = HAL_I2C_MODE_NONE;
+
+      /* Update I2C error code */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
+    {
+      /* Clear ADDR flag after prepare the transfer parameters */
+      /* This action will generate an acknowledge to the Master */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    /* REnable ADDR interrupt */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Enable the Address listen mode with Interrupt.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    hi2c->State = HAL_I2C_STATE_LISTEN;
+    hi2c->XferISR = I2C_Slave_ISR_IT;
+
+    /* Enable the Address Match interrupt */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Disable the Address listen mode with Interrupt.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+  /* Declaration of tmp to prevent undefined behavior of volatile usage */
+  uint32_t tmp;
+
+  /* Disable Address listen mode only if a transfer is not ongoing */
+  if (hi2c->State == HAL_I2C_STATE_LISTEN)
+  {
+    tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+    hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode = HAL_I2C_MODE_NONE;
+    hi2c->XferISR = NULL;
+
+    /* Disable the Address Match interrupt */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Abort a master I2C IT or DMA process communication with Interrupt.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
+{
+  if (hi2c->Mode == HAL_I2C_MODE_MASTER)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Interrupts and Store Previous state */
+    if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+    {
+      I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+      hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
+    }
+    else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+    {
+      I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+      hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+    }
+    else
+    {
+      /* Do nothing */
+    }
+
+    /* Set State at HAL_I2C_STATE_ABORT */
+    hi2c->State = HAL_I2C_STATE_ABORT;
+
+    /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */
+    /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+    I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    /* Wrong usage of abort function */
+    /* This function should be used only in case of abort monitored by master device */
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+  * @{
+  */
+
+/**
+  * @brief  This function handles I2C event interrupt request.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+  /* Get current IT Flags and IT sources value */
+  uint32_t itflags   = READ_REG(hi2c->Instance->ISR);
+  uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+  /* I2C events treatment -------------------------------------*/
+  if (hi2c->XferISR != NULL)
+  {
+    hi2c->XferISR(hi2c, itflags, itsources);
+  }
+}
+
+/**
+  * @brief  This function handles I2C error interrupt request.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+  uint32_t itflags   = READ_REG(hi2c->Instance->ISR);
+  uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+  uint32_t tmperror;
+
+  /* I2C Bus error interrupt occurred ------------------------------------*/
+  if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+    /* Clear BERR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+  }
+
+  /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+  if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+
+    /* Clear OVR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+  }
+
+  /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
+  if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+    /* Clear ARLO flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+  }
+
+  /* Store current volatile hi2c->ErrorCode, misra rule */
+  tmperror = hi2c->ErrorCode;
+
+  /* Call the Error Callback in case of Error detected */
+  if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) !=  HAL_I2C_ERROR_NONE)
+  {
+    I2C_ITError(hi2c, tmperror);
+  }
+}
+
+/**
+  * @brief  Master Tx Transfer completed callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_MasterTxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Master Rx Transfer completed callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_MasterRxCpltCallback could be implemented in the user file
+   */
+}
+
+/** @brief  Slave Tx Transfer completed callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Slave Rx Transfer completed callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Slave Address Match callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION
+  * @param  AddrMatchCode Address Match Code
+  * @retval None
+  */
+__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  UNUSED(TransferDirection);
+  UNUSED(AddrMatchCode);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_AddrCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Listen Complete callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_ListenCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Memory Tx Transfer completed callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_MemTxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Memory Rx Transfer completed callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_MemRxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  I2C error callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  I2C abort callback.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_I2C_AbortCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+  *  @brief   Peripheral State, Mode and Error functions
+  *
+@verbatim
+ ===============================================================================
+            ##### Peripheral State, Mode and Error functions #####
+ ===============================================================================
+    [..]
+    This subsection permit to get in run-time the status of the peripheral
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the I2C handle state.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL state
+  */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+  /* Return I2C handle state */
+  return hi2c->State;
+}
+
+/**
+  * @brief  Returns the I2C Master, Slave, Memory or no mode.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL mode
+  */
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
+{
+  return hi2c->Mode;
+}
+
+/**
+  * @brief  Return the I2C error code.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *              the configuration information for the specified I2C.
+  * @retval I2C Error Code
+  */
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+  return hi2c->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  ITFlags Interrupt flags to handle.
+  * @param  ITSources Interrupt sources enabled.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+  uint16_t devaddress;
+  uint32_t tmpITFlags = ITFlags;
+
+  /* Process Locked */
+  __HAL_LOCK(hi2c);
+
+  if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+  {
+    /* Clear NACK Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+    /* Set corresponding Error Code */
+    /* No need to generate STOP, it is automatically done */
+    /* Error callback will be send during stop flag treatment */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+    /* Flush TX register */
+    I2C_Flush_TXDR(hi2c);
+  }
+  else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
+  {
+    /* Remove RXNE flag on temporary variable as read done */
+    tmpITFlags &= ~I2C_FLAG_RXNE;
+
+    /* Read data from RXDR */
+    *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+    /* Increment Buffer pointer */
+    hi2c->pBuffPtr++;
+
+    hi2c->XferSize--;
+    hi2c->XferCount--;
+  }
+  else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
+  {
+    /* Write data to TXDR */
+    hi2c->Instance->TXDR = *hi2c->pBuffPtr;
+
+    /* Increment Buffer pointer */
+    hi2c->pBuffPtr++;
+
+    hi2c->XferSize--;
+    hi2c->XferCount--;
+  }
+  else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+  {
+    if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
+    {
+      devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+      if (hi2c->XferCount > MAX_NBYTE_SIZE)
+      {
+        hi2c->XferSize = MAX_NBYTE_SIZE;
+        I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+      }
+      else
+      {
+        hi2c->XferSize = hi2c->XferCount;
+        if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+        {
+          I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP);
+        }
+        else
+        {
+          I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+        }
+      }
+    }
+    else
+    {
+      /* Call TxCpltCallback() if no stop mode is set */
+      if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+      {
+        /* Call I2C Master Sequential complete process */
+        I2C_ITMasterSeqCplt(hi2c);
+      }
+      else
+      {
+        /* Wrong size Status regarding TCR flag event */
+        /* Call the corresponding callback to inform upper layer of End of Transfer */
+        I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+      }
+    }
+  }
+  else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+  {
+    if (hi2c->XferCount == 0U)
+    {
+      if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+      {
+        /* Generate a stop condition in case of no transfer option */
+        if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
+        {
+          /* Generate Stop */
+          hi2c->Instance->CR2 |= I2C_CR2_STOP;
+        }
+        else
+        {
+          /* Call I2C Master Sequential complete process */
+          I2C_ITMasterSeqCplt(hi2c);
+        }
+      }
+    }
+    else
+    {
+      /* Wrong size Status regarding TC flag event */
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+      I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+    }
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+
+  if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+  {
+    /* Call I2C Master complete process */
+    I2C_ITMasterCplt(hi2c, tmpITFlags);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  ITFlags Interrupt flags to handle.
+  * @param  ITSources Interrupt sources enabled.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+  uint32_t tmpoptions = hi2c->XferOptions;
+  uint32_t tmpITFlags = ITFlags;
+
+  /* Process locked */
+  __HAL_LOCK(hi2c);
+
+  /* Check if STOPF is set */
+  if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+  {
+    /* Call I2C Slave complete process */
+    I2C_ITSlaveCplt(hi2c, tmpITFlags);
+  }
+
+  if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+  {
+    /* Check that I2C transfer finished */
+    /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+    /* Mean XferCount == 0*/
+    /* So clear Flag NACKF only */
+    if (hi2c->XferCount == 0U)
+    {
+      /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */
+      if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME))
+      {
+        /* Call I2C Listen complete process */
+        I2C_ITListenCplt(hi2c, tmpITFlags);
+      }
+      else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME))
+      {
+        /* Clear NACK Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+        /* Flush TX register */
+        I2C_Flush_TXDR(hi2c);
+
+        /* Last Byte is Transmitted */
+        /* Call I2C Slave Sequential complete process */
+        I2C_ITSlaveSeqCplt(hi2c);
+      }
+      else
+      {
+        /* Clear NACK Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+      }
+    }
+    else
+    {
+      /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+      /* Clear NACK Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+      /* Set ErrorCode corresponding to a Non-Acknowledge */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+      if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME))
+      {
+        /* Call the corresponding callback to inform upper layer of End of Transfer */
+        I2C_ITError(hi2c, hi2c->ErrorCode);
+      }
+    }
+  }
+  else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
+  {
+    if (hi2c->XferCount > 0U)
+    {
+      /* Read data from RXDR */
+      *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferSize--;
+      hi2c->XferCount--;
+    }
+
+    if ((hi2c->XferCount == 0U) && \
+        (tmpoptions != I2C_NO_OPTION_FRAME))
+    {
+      /* Call I2C Slave Sequential complete process */
+      I2C_ITSlaveSeqCplt(hi2c);
+    }
+  }
+  else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \
+           (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
+  {
+    I2C_ITAddrCplt(hi2c, tmpITFlags);
+  }
+  else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
+  {
+    /* Write data to TXDR only if XferCount not reach "0" */
+    /* A TXIS flag can be set, during STOP treatment      */
+    /* Check if all data have already been sent */
+    /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+    if (hi2c->XferCount > 0U)
+    {
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = *hi2c->pBuffPtr;
+
+      /* Increment Buffer pointer */
+      hi2c->pBuffPtr++;
+
+      hi2c->XferCount--;
+      hi2c->XferSize--;
+    }
+    else
+    {
+      if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME))
+      {
+        /* Last Byte is Transmitted */
+        /* Call I2C Slave Sequential complete process */
+        I2C_ITSlaveSeqCplt(hi2c);
+      }
+    }
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  ITFlags Interrupt flags to handle.
+  * @param  ITSources Interrupt sources enabled.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+  uint16_t devaddress;
+  uint32_t xfermode;
+
+  /* Process Locked */
+  __HAL_LOCK(hi2c);
+
+  if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+  {
+    /* Clear NACK Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+    /* Set corresponding Error Code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+    /* No need to generate STOP, it is automatically done */
+    /* But enable STOP interrupt, to treat it */
+    /* Error callback will be send during stop flag treatment */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+    /* Flush TX register */
+    I2C_Flush_TXDR(hi2c);
+  }
+  else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+  {
+    /* Disable TC interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI);
+
+    if (hi2c->XferCount != 0U)
+    {
+      /* Recover Slave address */
+      devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+      /* Prepare the new XferSize to transfer */
+      if (hi2c->XferCount > MAX_NBYTE_SIZE)
+      {
+        hi2c->XferSize = MAX_NBYTE_SIZE;
+        xfermode = I2C_RELOAD_MODE;
+      }
+      else
+      {
+        hi2c->XferSize = hi2c->XferCount;
+        if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+        {
+          xfermode = hi2c->XferOptions;
+        }
+        else
+        {
+          xfermode = I2C_AUTOEND_MODE;
+        }
+      }
+
+      /* Set the new XferSize in Nbytes register */
+      I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+      /* Update XferCount value */
+      hi2c->XferCount -= hi2c->XferSize;
+
+      /* Enable DMA Request */
+      if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+      {
+        hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+      }
+      else
+      {
+        hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+      }
+    }
+    else
+    {
+      /* Call TxCpltCallback() if no stop mode is set */
+      if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+      {
+        /* Call I2C Master Sequential complete process */
+        I2C_ITMasterSeqCplt(hi2c);
+      }
+      else
+      {
+        /* Wrong size Status regarding TCR flag event */
+        /* Call the corresponding callback to inform upper layer of End of Transfer */
+        I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+      }
+    }
+  }
+  else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+  {
+    if (hi2c->XferCount == 0U)
+    {
+      if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+      {
+        /* Generate a stop condition in case of no transfer option */
+        if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
+        {
+          /* Generate Stop */
+          hi2c->Instance->CR2 |= I2C_CR2_STOP;
+        }
+        else
+        {
+          /* Call I2C Master Sequential complete process */
+          I2C_ITMasterSeqCplt(hi2c);
+        }
+      }
+    }
+    else
+    {
+      /* Wrong size Status regarding TC flag event */
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+      I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+    }
+  }
+  else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+  {
+    /* Call I2C Master complete process */
+    I2C_ITMasterCplt(hi2c, ITFlags);
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  ITFlags Interrupt flags to handle.
+  * @param  ITSources Interrupt sources enabled.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+  uint32_t tmpoptions = hi2c->XferOptions;
+  uint32_t treatdmanack = 0U;
+  HAL_I2C_StateTypeDef tmpstate;
+
+  /* Process locked */
+  __HAL_LOCK(hi2c);
+
+  /* Check if STOPF is set */
+  if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+  {
+    /* Call I2C Slave complete process */
+    I2C_ITSlaveCplt(hi2c, ITFlags);
+  }
+
+  if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+  {
+    /* Check that I2C transfer finished */
+    /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+    /* Mean XferCount == 0 */
+    /* So clear Flag NACKF only */
+    if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) ||
+        (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET))
+    {
+      /* Split check of hdmarx, for MISRA compliance */
+      if (hi2c->hdmarx != NULL)
+      {
+        if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)
+        {
+          if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U)
+          {
+            treatdmanack = 1U;
+          }
+        }
+      }
+
+      /* Split check of hdmatx, for MISRA compliance  */
+      if (hi2c->hdmatx != NULL)
+      {
+        if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET)
+        {
+          if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U)
+          {
+            treatdmanack = 1U;
+          }
+        }
+      }
+
+      if (treatdmanack == 1U)
+      {
+        /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */
+        if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME))
+        {
+          /* Call I2C Listen complete process */
+          I2C_ITListenCplt(hi2c, ITFlags);
+        }
+        else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME))
+        {
+          /* Clear NACK Flag */
+          __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+          /* Flush TX register */
+          I2C_Flush_TXDR(hi2c);
+
+          /* Last Byte is Transmitted */
+          /* Call I2C Slave Sequential complete process */
+          I2C_ITSlaveSeqCplt(hi2c);
+        }
+        else
+        {
+          /* Clear NACK Flag */
+          __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+        }
+      }
+      else
+      {
+        /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+        /* Clear NACK Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+        /* Set ErrorCode corresponding to a Non-Acknowledge */
+        hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+        /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */
+        tmpstate = hi2c->State;
+
+        if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME))
+        {
+          if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN))
+          {
+            hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
+          }
+          else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN))
+          {
+            hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
+          }
+          else
+          {
+            /* Do nothing */
+          }
+
+          /* Call the corresponding callback to inform upper layer of End of Transfer */
+          I2C_ITError(hi2c, hi2c->ErrorCode);
+        }
+      }
+    }
+    else
+    {
+      /* Only Clear NACK Flag, no DMA treatment is pending */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+    }
+  }
+  else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
+  {
+    I2C_ITAddrCplt(hi2c, ITFlags);
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for write request.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  Timeout Timeout duration
+  * @param  Tickstart Tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                                uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+  I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+
+  /* Wait until TXIS flag is set */
+  if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+  {
+    return HAL_ERROR;
+  }
+
+  /* If Memory address size is 8Bit */
+  if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+  /* If Memory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+    /* Wait until TXIS flag is set */
+    if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Send LSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+
+  /* Wait until TCR flag is set */
+  if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
+  {
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for read request.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress Target device address: The device 7 bits address value
+  *         in datasheet must be shifted to the left before calling the interface
+  * @param  MemAddress Internal memory address
+  * @param  MemAddSize Size of internal memory address
+  * @param  Timeout Timeout duration
+  * @param  Tickstart Tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+                                               uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+  I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
+
+  /* Wait until TXIS flag is set */
+  if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+  {
+    return HAL_ERROR;
+  }
+
+  /* If Memory address size is 8Bit */
+  if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+  /* If Memory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+    /* Wait until TXIS flag is set */
+    if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Send LSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+
+  /* Wait until TC flag is set */
+  if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
+  {
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  I2C Address complete process callback.
+  * @param  hi2c I2C handle.
+  * @param  ITFlags Interrupt flags to handle.
+  * @retval None
+  */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+  uint8_t transferdirection;
+  uint16_t slaveaddrcode;
+  uint16_t ownadd1code;
+  uint16_t ownadd2code;
+
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ITFlags);
+
+  /* In case of Listen state, need to inform upper layer of address match code event */
+  if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
+  {
+    transferdirection = I2C_GET_DIR(hi2c);
+    slaveaddrcode     = I2C_GET_ADDR_MATCH(hi2c);
+    ownadd1code       = I2C_GET_OWN_ADDRESS1(hi2c);
+    ownadd2code       = I2C_GET_OWN_ADDRESS2(hi2c);
+
+    /* If 10bits addressing mode is selected */
+    if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+    {
+      if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+      {
+        slaveaddrcode = ownadd1code;
+        hi2c->AddrEventCount++;
+        if (hi2c->AddrEventCount == 2U)
+        {
+          /* Reset Address Event counter */
+          hi2c->AddrEventCount = 0U;
+
+          /* Clear ADDR flag */
+          __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2c);
+
+          /* Call Slave Addr callback */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+          hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode);
+#else
+          HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+        }
+      }
+      else
+      {
+        slaveaddrcode = ownadd2code;
+
+        /* Disable ADDR Interrupts */
+        I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        /* Call Slave Addr callback */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+        hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode);
+#else
+        HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+      }
+    }
+    /* else 7 bits addressing mode is selected */
+    else
+    {
+      /* Disable ADDR Interrupts */
+      I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Call Slave Addr callback */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+      hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode);
+#else
+      HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+    }
+  }
+  /* Else clear address flag only */
+  else
+  {
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+  }
+}
+
+/**
+  * @brief  I2C Master sequential complete process.
+  * @param  hi2c I2C handle.
+  * @retval None
+  */
+static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c)
+{
+  /* Reset I2C handle mode */
+  hi2c->Mode = HAL_I2C_MODE_NONE;
+
+  /* No Generate Stop, to permit restart mode */
+  /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */
+  if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+  {
+    hi2c->State         = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
+    hi2c->XferISR       = NULL;
+
+    /* Disable Interrupts */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->MasterTxCpltCallback(hi2c);
+#else
+    HAL_I2C_MasterTxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+  /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+  else
+  {
+    hi2c->State         = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+    hi2c->XferISR       = NULL;
+
+    /* Disable Interrupts */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->MasterRxCpltCallback(hi2c);
+#else
+    HAL_I2C_MasterRxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+}
+
+/**
+  * @brief  I2C Slave sequential complete process.
+  * @param  hi2c I2C handle.
+  * @retval None
+  */
+static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c)
+{
+  uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1);
+
+  /* Reset I2C handle mode */
+  hi2c->Mode = HAL_I2C_MODE_NONE;
+
+  /* If a DMA is ongoing, Update handle size context */
+  if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET)
+  {
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+  }
+  else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET)
+  {
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+  }
+  else
+  {
+    /* Do nothing */
+  }
+
+  if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+  {
+    /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */
+    hi2c->State         = HAL_I2C_STATE_LISTEN;
+    hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
+
+    /* Disable Interrupts */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->SlaveTxCpltCallback(hi2c);
+#else
+    HAL_I2C_SlaveTxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+
+  else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+  {
+    /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */
+    hi2c->State         = HAL_I2C_STATE_LISTEN;
+    hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
+
+    /* Disable Interrupts */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->SlaveRxCpltCallback(hi2c);
+#else
+    HAL_I2C_SlaveRxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+}
+
+/**
+  * @brief  I2C Master complete process.
+  * @param  hi2c I2C handle.
+  * @param  ITFlags Interrupt flags to handle.
+  * @retval None
+  */
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+  uint32_t tmperror;
+  uint32_t tmpITFlags = ITFlags;
+  __IO uint32_t tmpreg;
+
+  /* Clear STOP Flag */
+  __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+  /* Disable Interrupts and Store Previous state */
+  if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+  {
+    I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+    hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
+  }
+  else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+  {
+    I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+    hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+  }
+  else
+  {
+    /* Do nothing */
+  }
+
+  /* Clear Configuration Register 2 */
+  I2C_RESET_CR2(hi2c);
+
+  /* Reset handle parameters */
+  hi2c->XferISR       = NULL;
+  hi2c->XferOptions   = I2C_NO_OPTION_FRAME;
+
+  if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET)
+  {
+    /* Clear NACK Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+    /* Set acknowledge error code */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+  }
+
+  /* Fetch Last receive data if any */
+  if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET))
+  {
+    /* Read data from RXDR */
+    tmpreg = (uint8_t)hi2c->Instance->RXDR;
+    UNUSED(tmpreg);
+  }
+
+  /* Flush TX register */
+  I2C_Flush_TXDR(hi2c);
+
+  /* Store current volatile hi2c->ErrorCode, misra rule */
+  tmperror = hi2c->ErrorCode;
+
+  /* Call the corresponding callback to inform upper layer of End of Transfer */
+  if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE))
+  {
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+    I2C_ITError(hi2c, hi2c->ErrorCode);
+  }
+  /* hi2c->State == HAL_I2C_STATE_BUSY_TX */
+  else if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+  {
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_NONE;
+
+    if (hi2c->Mode == HAL_I2C_MODE_MEM)
+    {
+      hi2c->Mode = HAL_I2C_MODE_NONE;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+      hi2c->MemTxCpltCallback(hi2c);
+#else
+      HAL_I2C_MemTxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+    }
+    else
+    {
+      hi2c->Mode = HAL_I2C_MODE_NONE;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+      hi2c->MasterTxCpltCallback(hi2c);
+#else
+      HAL_I2C_MasterTxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+    }
+  }
+  /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+  else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+  {
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_NONE;
+
+    if (hi2c->Mode == HAL_I2C_MODE_MEM)
+    {
+      hi2c->Mode = HAL_I2C_MODE_NONE;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+      hi2c->MemRxCpltCallback(hi2c);
+#else
+      HAL_I2C_MemRxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+    }
+    else
+    {
+      hi2c->Mode = HAL_I2C_MODE_NONE;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+      hi2c->MasterRxCpltCallback(hi2c);
+#else
+      HAL_I2C_MasterRxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+    }
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+}
+
+/**
+  * @brief  I2C Slave complete process.
+  * @param  hi2c I2C handle.
+  * @param  ITFlags Interrupt flags to handle.
+  * @retval None
+  */
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+  uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1);
+  uint32_t tmpITFlags = ITFlags;
+  HAL_I2C_StateTypeDef tmpstate = hi2c->State;
+
+  /* Clear STOP Flag */
+  __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+  /* Disable Interrupts and Store Previous state */
+  if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN))
+  {
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
+    hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
+  }
+  else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN))
+  {
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
+    hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
+  }
+  else
+  {
+    /* Do nothing */
+  }
+
+  /* Disable Address Acknowledge */
+  hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+  /* Clear Configuration Register 2 */
+  I2C_RESET_CR2(hi2c);
+
+  /* Flush TX register */
+  I2C_Flush_TXDR(hi2c);
+
+  /* If a DMA is ongoing, Update handle size context */
+  if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET)
+  {
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+    if (hi2c->hdmatx != NULL)
+    {
+      hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx);
+    }
+  }
+  else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET)
+  {
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+    if (hi2c->hdmarx != NULL)
+    {
+      hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx);
+    }
+  }
+  else
+  {
+    /* Do nothing */
+  }
+
+  /* Store Last receive data if any */
+  if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)
+  {
+    /* Remove RXNE flag on temporary variable as read done */
+    tmpITFlags &= ~I2C_FLAG_RXNE;
+
+    /* Read data from RXDR */
+    *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+    /* Increment Buffer pointer */
+    hi2c->pBuffPtr++;
+
+    if ((hi2c->XferSize > 0U))
+    {
+      hi2c->XferSize--;
+      hi2c->XferCount--;
+    }
+  }
+
+  /* All data are not transferred, so set error code accordingly */
+  if (hi2c->XferCount != 0U)
+  {
+    /* Set ErrorCode corresponding to a Non-Acknowledge */
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+  }
+
+  hi2c->Mode = HAL_I2C_MODE_NONE;
+  hi2c->XferISR = NULL;
+
+  if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+    I2C_ITError(hi2c, hi2c->ErrorCode);
+
+    /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+    if (hi2c->State == HAL_I2C_STATE_LISTEN)
+    {
+      /* Call I2C Listen complete process */
+      I2C_ITListenCplt(hi2c, tmpITFlags);
+    }
+  }
+  else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+  {
+    /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */
+    I2C_ITSlaveSeqCplt(hi2c);
+
+    hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->ListenCpltCallback(hi2c);
+#else
+    HAL_I2C_ListenCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+  /* Call the corresponding callback to inform upper layer of End of Transfer */
+  else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+  {
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->SlaveRxCpltCallback(hi2c);
+#else
+    HAL_I2C_SlaveRxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+  else
+  {
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->SlaveTxCpltCallback(hi2c);
+#else
+    HAL_I2C_SlaveTxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+}
+
+/**
+  * @brief  I2C Listen complete process.
+  * @param  hi2c I2C handle.
+  * @param  ITFlags Interrupt flags to handle.
+  * @retval None
+  */
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+  /* Reset handle parameters */
+  hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+  hi2c->PreviousState = I2C_STATE_NONE;
+  hi2c->State = HAL_I2C_STATE_READY;
+  hi2c->Mode = HAL_I2C_MODE_NONE;
+  hi2c->XferISR = NULL;
+
+  /* Store Last receive data if any */
+  if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET)
+  {
+    /* Read data from RXDR */
+    *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
+
+    /* Increment Buffer pointer */
+    hi2c->pBuffPtr++;
+
+    if ((hi2c->XferSize > 0U))
+    {
+      hi2c->XferSize--;
+      hi2c->XferCount--;
+
+      /* Set ErrorCode corresponding to a Non-Acknowledge */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    }
+  }
+
+  /* Disable all Interrupts*/
+  I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+  /* Clear NACK Flag */
+  __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+
+  /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+  hi2c->ListenCpltCallback(hi2c);
+#else
+  HAL_I2C_ListenCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  I2C interrupts error process.
+  * @param  hi2c I2C handle.
+  * @param  ErrorCode Error code to handle.
+  * @retval None
+  */
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode)
+{
+  HAL_I2C_StateTypeDef tmpstate = hi2c->State;
+  uint32_t tmppreviousstate;
+
+  /* Reset handle parameters */
+  hi2c->Mode          = HAL_I2C_MODE_NONE;
+  hi2c->XferOptions   = I2C_NO_OPTION_FRAME;
+  hi2c->XferCount     = 0U;
+
+  /* Set new error code */
+  hi2c->ErrorCode |= ErrorCode;
+
+  /* Disable Interrupts */
+  if ((tmpstate == HAL_I2C_STATE_LISTEN)         ||
+      (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) ||
+      (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN))
+  {
+    /* Disable all interrupts, except interrupts related to LISTEN state */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+    /* keep HAL_I2C_STATE_LISTEN if set */
+    hi2c->State         = HAL_I2C_STATE_LISTEN;
+    hi2c->XferISR       = I2C_Slave_ISR_IT;
+  }
+  else
+  {
+    /* Disable all interrupts */
+    I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+    /* If state is an abort treatment on going, don't change state */
+    /* This change will be do later */
+    if (hi2c->State != HAL_I2C_STATE_ABORT)
+    {
+      /* Set HAL_I2C_STATE_READY */
+      hi2c->State         = HAL_I2C_STATE_READY;
+    }
+    hi2c->XferISR       = NULL;
+  }
+
+  /* Abort DMA TX transfer if any */
+  tmppreviousstate = hi2c->PreviousState;
+  if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \
+                                 (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX)))
+  {
+    if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+    {
+      hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+    }
+
+    if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY)
+    {
+      /* Set the I2C DMA Abort callback :
+       will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+      hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Abort DMA TX */
+      if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+      {
+        /* Call Directly XferAbortCallback function in case of error */
+        hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+      }
+    }
+    else
+    {
+      I2C_TreatErrorCallback(hi2c);
+    }
+  }
+  /* Abort DMA RX transfer if any */
+  else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \
+                                      (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX)))
+  {
+    if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+    {
+      hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+    }
+
+    if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY)
+    {
+      /* Set the I2C DMA Abort callback :
+        will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+      hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      /* Abort DMA RX */
+      if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+      {
+        /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
+        hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+      }
+    }
+    else
+    {
+      I2C_TreatErrorCallback(hi2c);
+    }
+  }
+  else
+  {
+    I2C_TreatErrorCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  I2C Error callback treatment.
+  * @param  hi2c I2C handle.
+  * @retval None
+  */
+static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+  if (hi2c->State == HAL_I2C_STATE_ABORT)
+  {
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->PreviousState = I2C_STATE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->AbortCpltCallback(hi2c);
+#else
+    HAL_I2C_AbortCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+  else
+  {
+    hi2c->PreviousState = I2C_STATE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Call the corresponding callback to inform upper layer of End of Transfer */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+    hi2c->ErrorCallback(hi2c);
+#else
+    HAL_I2C_ErrorCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+  }
+}
+
+/**
+  * @brief  I2C Tx data register flush process.
+  * @param  hi2c I2C handle.
+  * @retval None
+  */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c)
+{
+  /* If a pending TXIS flag is set */
+  /* Write a dummy data in TXDR to clear it */
+  if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET)
+  {
+    hi2c->Instance->TXDR = 0x00U;
+  }
+
+  /* Flush TX register if not empty */
+  if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+  {
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
+  }
+}
+
+/**
+  * @brief  DMA I2C master transmit process complete callback.
+  * @param  hdma DMA handle
+  * @retval None
+  */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+  /* If last transfer, enable STOP interrupt */
+  if (hi2c->XferCount == 0U)
+  {
+    /* Enable STOP interrupt */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+  }
+  /* else prepare a new DMA transfer and enable TCReload interrupt */
+  else
+  {
+    /* Update Buffer pointer */
+    hi2c->pBuffPtr += hi2c->XferSize;
+
+    /* Set the XferSize to transfer */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+    }
+
+    /* Enable the DMA channel */
+    if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK)
+    {
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+      I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
+    }
+    else
+    {
+      /* Enable TC interrupts */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+    }
+  }
+}
+
+/**
+  * @brief  DMA I2C slave transmit process complete callback.
+  * @param  hdma DMA handle
+  * @retval None
+  */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  uint32_t tmpoptions = hi2c->XferOptions;
+
+  if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME))
+  {
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+    /* Last Byte is Transmitted */
+    /* Call I2C Slave Sequential complete process */
+    I2C_ITSlaveSeqCplt(hi2c);
+  }
+  else
+  {
+    /* No specific action, Master fully manage the generation of STOP condition */
+    /* Mean that this generation can arrive at any time, at the end or during DMA process */
+    /* So STOP condition should be manage through Interrupt treatment */
+  }
+}
+
+/**
+  * @brief DMA I2C master receive process complete callback.
+  * @param  hdma DMA handle
+  * @retval None
+  */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+  /* If last transfer, enable STOP interrupt */
+  if (hi2c->XferCount == 0U)
+  {
+    /* Enable STOP interrupt */
+    I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+  }
+  /* else prepare a new DMA transfer and enable TCReload interrupt */
+  else
+  {
+    /* Update Buffer pointer */
+    hi2c->pBuffPtr += hi2c->XferSize;
+
+    /* Set the XferSize to transfer */
+    if (hi2c->XferCount > MAX_NBYTE_SIZE)
+    {
+      hi2c->XferSize = MAX_NBYTE_SIZE;
+    }
+    else
+    {
+      hi2c->XferSize = hi2c->XferCount;
+    }
+
+    /* Enable the DMA channel */
+    if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK)
+    {
+      /* Call the corresponding callback to inform upper layer of End of Transfer */
+      I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
+    }
+    else
+    {
+      /* Enable TC interrupts */
+      I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+    }
+  }
+}
+
+/**
+  * @brief  DMA I2C slave receive process complete callback.
+  * @param  hdma DMA handle
+  * @retval None
+  */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  uint32_t tmpoptions = hi2c->XferOptions;
+
+  if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \
+      (tmpoptions != I2C_NO_OPTION_FRAME))
+  {
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+    /* Call I2C Slave Sequential complete process */
+    I2C_ITSlaveSeqCplt(hi2c);
+  }
+  else
+  {
+    /* No specific action, Master fully manage the generation of STOP condition */
+    /* Mean that this generation can arrive at any time, at the end or during DMA process */
+    /* So STOP condition should be manage through Interrupt treatment */
+  }
+}
+
+/**
+  * @brief  DMA I2C communication error callback.
+  * @param hdma DMA handle
+  * @retval None
+  */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Disable Acknowledge */
+  hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+  /* Call the corresponding callback to inform upper layer of End of Transfer */
+  I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
+}
+
+/**
+  * @brief DMA I2C communication abort callback
+  *        (To be called at end of DMA Abort procedure).
+  * @param hdma DMA handle.
+  * @retval None
+  */
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Reset AbortCpltCallback */
+  if (hi2c->hdmatx != NULL)
+  {
+    hi2c->hdmatx->XferAbortCallback = NULL;
+  }
+  if (hi2c->hdmarx != NULL)
+  {
+    hi2c->hdmarx->XferAbortCallback = NULL;
+  }
+
+  I2C_TreatErrorCallback(hi2c);
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Flag Specifies the I2C flag to check.
+  * @param  Status The new Flag status (SET or RESET).
+  * @param  Timeout Timeout duration
+  * @param  Tickstart Tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status,
+                                                    uint32_t Timeout, uint32_t Tickstart)
+{
+  while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)
+  {
+    /* Check for the Timeout */
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+        hi2c->State = HAL_I2C_STATE_READY;
+        hi2c->Mode = HAL_I2C_MODE_NONE;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout for specific usage of TXIS flag.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout Timeout duration
+  * @param  Tickstart Tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+  while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Check for the Timeout */
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+        hi2c->State = HAL_I2C_STATE_READY;
+        hi2c->Mode = HAL_I2C_MODE_NONE;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout for specific usage of STOP flag.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout Timeout duration
+  * @param  Tickstart Tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+  while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Check for the Timeout */
+    if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      hi2c->State = HAL_I2C_STATE_READY;
+      hi2c->Mode = HAL_I2C_MODE_NONE;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout for specific usage of RXNE flag.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout Timeout duration
+  * @param  Tickstart Tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+  while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Check if a STOPF is detected */
+    if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+    {
+      /* Check if an RXNE is pending */
+      /* Store Last receive data if any */
+      if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U))
+      {
+        /* Return HAL_OK */
+        /* The Reading of data from RXDR will be done in caller function */
+        return HAL_OK;
+      }
+      else
+      {
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+        /* Clear Configuration Register 2 */
+        I2C_RESET_CR2(hi2c);
+
+        hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+        hi2c->State = HAL_I2C_STATE_READY;
+        hi2c->Mode = HAL_I2C_MODE_NONE;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_ERROR;
+      }
+    }
+
+    /* Check for the Timeout */
+    if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Acknowledge failed detection during an I2C Communication.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout Timeout duration
+  * @param  Tickstart Tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+  if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+  {
+    /* Wait until STOP Flag is reset */
+    /* AutoEnd should be initiate after AF */
+    while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+    {
+      /* Check for the Timeout */
+      if (Timeout != HAL_MAX_DELAY)
+      {
+        if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+          hi2c->State = HAL_I2C_STATE_READY;
+          hi2c->Mode = HAL_I2C_MODE_NONE;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2c);
+
+          return HAL_ERROR;
+        }
+      }
+    }
+
+    /* Clear NACKF Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+    /* Flush TX register */
+    I2C_Flush_TXDR(hi2c);
+
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    hi2c->State = HAL_I2C_STATE_READY;
+    hi2c->Mode = HAL_I2C_MODE_NONE;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_ERROR;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+  * @param  hi2c I2C handle.
+  * @param  DevAddress Specifies the slave address to be programmed.
+  * @param  Size Specifies the number of bytes to be programmed.
+  *   This parameter must be a value between 0 and 255.
+  * @param  Mode New state of the I2C START condition generation.
+  *   This parameter can be one of the following values:
+  *     @arg @ref I2C_RELOAD_MODE Enable Reload mode .
+  *     @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode.
+  *     @arg @ref I2C_SOFTEND_MODE Enable Software end mode.
+  * @param  Request New state of the I2C START condition generation.
+  *   This parameter can be one of the following values:
+  *     @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition.
+  *     @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
+  *     @arg @ref I2C_GENERATE_START_READ Generate Restart for read request.
+  *     @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request.
+  * @retval None
+  */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode,
+                               uint32_t Request)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_TRANSFER_MODE(Mode));
+  assert_param(IS_TRANSFER_REQUEST(Request));
+
+  /* update CR2 register */
+  MODIFY_REG(hi2c->Instance->CR2,
+             ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \
+               (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \
+             (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) |
+                        (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request));
+}
+
+/**
+  * @brief  Manage the enabling of Interrupts.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+  * @retval None
+  */
+static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+  uint32_t tmpisr = 0U;
+
+  if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \
+      (hi2c->XferISR == I2C_Slave_ISR_DMA))
+  {
+    if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+    {
+      /* Enable ERR, STOP, NACK and ADDR interrupts */
+      tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+    }
+
+    if (InterruptRequest == I2C_XFER_ERROR_IT)
+    {
+      /* Enable ERR and NACK interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+    }
+
+    if (InterruptRequest == I2C_XFER_CPLT_IT)
+    {
+      /* Enable STOP interrupts */
+      tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI);
+    }
+
+    if (InterruptRequest == I2C_XFER_RELOAD_IT)
+    {
+      /* Enable TC interrupts */
+      tmpisr |= I2C_IT_TCI;
+    }
+  }
+  else
+  {
+    if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+    {
+      /* Enable ERR, STOP, NACK, and ADDR interrupts */
+      tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+    }
+
+    if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+    {
+      /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
+    }
+
+    if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+    {
+      /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+      tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
+    }
+
+    if (InterruptRequest == I2C_XFER_CPLT_IT)
+    {
+      /* Enable STOP interrupts */
+      tmpisr |= I2C_IT_STOPI;
+    }
+  }
+
+  /* Enable interrupts only at the end */
+  /* to avoid the risk of I2C interrupt handle execution before */
+  /* all interrupts requested done */
+  __HAL_I2C_ENABLE_IT(hi2c, tmpisr);
+}
+
+/**
+  * @brief  Manage the disabling of Interrupts.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+  * @retval None
+  */
+static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+  uint32_t tmpisr = 0U;
+
+  if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+  {
+    /* Disable TC and TXI interrupts */
+    tmpisr |= I2C_IT_TCI | I2C_IT_TXI;
+
+    if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN)
+    {
+      /* Disable NACK and STOP interrupts */
+      tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+    }
+  }
+
+  if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+  {
+    /* Disable TC and RXI interrupts */
+    tmpisr |= I2C_IT_TCI | I2C_IT_RXI;
+
+    if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN)
+    {
+      /* Disable NACK and STOP interrupts */
+      tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+    }
+  }
+
+  if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+  {
+    /* Disable ADDR, NACK and STOP interrupts */
+    tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+  }
+
+  if (InterruptRequest == I2C_XFER_ERROR_IT)
+  {
+    /* Enable ERR and NACK interrupts */
+    tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+  }
+
+  if (InterruptRequest == I2C_XFER_CPLT_IT)
+  {
+    /* Enable STOP interrupts */
+    tmpisr |= I2C_IT_STOPI;
+  }
+
+  if (InterruptRequest == I2C_XFER_RELOAD_IT)
+  {
+    /* Enable TC interrupts */
+    tmpisr |= I2C_IT_TCI;
+  }
+
+  /* Disable interrupts only at the end */
+  /* to avoid a breaking situation like at "t" time */
+  /* all disable interrupts request are not done */
+  __HAL_I2C_DISABLE_IT(hi2c, tmpisr);
+}
+
+/**
+  * @brief  Convert I2Cx OTHER_xxx XferOptions to functional XferOptions.
+  * @param  hi2c I2C handle.
+  * @retval None
+  */
+static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c)
+{
+  /* if user set XferOptions to I2C_OTHER_FRAME            */
+  /* it request implicitly to generate a restart condition */
+  /* set XferOptions to I2C_FIRST_FRAME                    */
+  if (hi2c->XferOptions == I2C_OTHER_FRAME)
+  {
+    hi2c->XferOptions = I2C_FIRST_FRAME;
+  }
+  /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */
+  /* it request implicitly to generate a restart condition    */
+  /* then generate a stop condition at the end of transfer    */
+  /* set XferOptions to I2C_FIRST_AND_LAST_FRAME              */
+  else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME)
+  {
+    hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME;
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c
new file mode 100644
index 0000000..a1e3f60
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c
@@ -0,0 +1,333 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_i2c_ex.c
+  * @author  MCD Application Team
+  * @brief   I2C Extended HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of I2C Extended peripheral:
+  *           + Extended features functions
+  *
+  @verbatim
+  ==============================================================================
+               ##### I2C peripheral Extended features  #####
+  ==============================================================================
+
+  [..] Comparing to other previous devices, the I2C interface for STM32F0xx
+       devices contains the following additional features
+
+       (+) Possibility to disable or enable Analog Noise Filter
+       (+) Use of a configured Digital Noise Filter
+       (+) Disable or enable wakeup from Stop mode(s)
+       (+) Disable or enable Fast Mode Plus
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to configure Noise Filter and Wake Up Feature
+    (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
+    (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
+    (#) Configure the enable or disable of I2C Wake Up Mode using the functions :
+          (++) HAL_I2CEx_EnableWakeUp()
+          (++) HAL_I2CEx_DisableWakeUp()
+    (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+          (++) HAL_I2CEx_EnableFastModePlus()
+          (++) HAL_I2CEx_DisableFastModePlus()
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2CEx I2CEx
+  * @brief I2C Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
+  * @brief    Extended features functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### Extended features functions #####
+ ===============================================================================
+    [..] This section provides functions allowing to:
+      (+) Configure Noise Filters
+      (+) Configure Wake Up Feature
+      (+) Configure Fast Mode Plus
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure I2C Analog noise filter.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  AnalogFilter New state of the Analog filter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Reset I2Cx ANOFF bit */
+    hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
+
+    /* Set analog filter bit*/
+    hi2c->Instance->CR1 |= AnalogFilter;
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Configure I2C Digital noise filter.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+  uint32_t tmpreg;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Get the old register value */
+    tmpreg = hi2c->Instance->CR1;
+
+    /* Reset I2Cx DNF bits [11:8] */
+    tmpreg &= ~(I2C_CR1_DNF);
+
+    /* Set I2Cx DNF coefficient */
+    tmpreg |= DigitalFilter << 8U;
+
+    /* Store the new register value */
+    hi2c->Instance->CR1 = tmpreg;
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+#if defined(I2C_CR1_WUPEN)
+
+/**
+  * @brief  Enable I2C wakeup from Stop mode(s).
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Enable wakeup from stop mode */
+    hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Disable I2C wakeup from Stop mode(s).
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Enable wakeup from stop mode */
+    hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+#endif
+
+/**
+  * @brief Enable the I2C fast mode plus driving capability.
+  * @param ConfigFastModePlus Selects the pin.
+  *   This parameter can be one of the @ref I2CEx_FastModePlus values
+  * @note  For I2C1, fast mode plus driving capability can be enabled on all selected
+  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+  *        on each one of the following pins PB6, PB7, PB8 and PB9.
+  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+  *        can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+  * @note  For all I2C2 pins fast mode plus driving capability can be enabled
+  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.
+  * @retval None
+  */
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+  /* Check the parameter */
+  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+  /* Enable SYSCFG clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* Enable fast mode plus driving capability for selected pin */
+  SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+  * @brief Disable the I2C fast mode plus driving capability.
+  * @param ConfigFastModePlus Selects the pin.
+  *   This parameter can be one of the @ref I2CEx_FastModePlus values
+  * @note  For I2C1, fast mode plus driving capability can be disabled on all selected
+  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+  *        on each one of the following pins PB6, PB7, PB8 and PB9.
+  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+  *        can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+  * @note  For all I2C2 pins fast mode plus driving capability can be disabled
+  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.
+  * @retval None
+  */
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+  /* Check the parameter */
+  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+  /* Enable SYSCFG clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* Disable fast mode plus driving capability for selected pin */
+  CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c
new file mode 100644
index 0000000..558d869
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c
@@ -0,0 +1,454 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_pwr.c
+  * @author  MCD Application Team
+  * @brief   PWR HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Power Controller (PWR) peripheral:
+  *           + Initialization/de-initialization function
+  *           + Peripheral Control function
+  *
+  @verbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWR PWR
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and de-initialization functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]
+      After reset, the backup domain (RTC registers, RTC backup data
+      registers) is protected against possible unwanted
+      write accesses.
+      To enable access to the RTC Domain and RTC registers, proceed as follows:
+        (+) Enable the Power Controller (PWR) APB1 interface clock using the
+            __HAL_RCC_PWR_CLK_ENABLE() macro.
+        (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Deinitializes the PWR peripheral registers to their default reset values.
+  * @retval None
+  */
+void HAL_PWR_DeInit(void)
+{
+  __HAL_RCC_PWR_FORCE_RESET();
+  __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+  * @brief Enables access to the backup domain (RTC registers, RTC
+  *         backup data registers when present).
+  * @note  If the HSE divided by 32 is used as the RTC clock, the
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+  PWR->CR |= (uint32_t)PWR_CR_DBP;
+}
+
+/**
+  * @brief Disables access to the backup domain (RTC registers, RTC
+  *         backup data registers when present).
+  * @note  If the HSE divided by 32 is used as the RTC clock, the
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+  PWR->CR &= ~((uint32_t)PWR_CR_DBP);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  *  @brief Low Power modes configuration functions
+  *
+@verbatim
+
+ ===============================================================================
+                 ##### Peripheral Control functions #####
+ ===============================================================================
+    
+    *** WakeUp pin configuration ***
+    ================================
+    [..]
+      (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is
+          forced in input pull down configuration and is active on rising edges.
+      (+) There are two WakeUp pins, and up to eight Wakeup pins on STM32F07x & STM32F09x devices.
+         (++)WakeUp Pin 1 on PA.00.
+         (++)WakeUp Pin 2 on PC.13.
+         (++)WakeUp Pin 3 on PE.06.(STM32F07x/STM32F09x)
+         (++)WakeUp Pin 4 on PA.02.(STM32F07x/STM32F09x)
+         (++)WakeUp Pin 5 on PC.05.(STM32F07x/STM32F09x)
+         (++)WakeUp Pin 6 on PB.05.(STM32F07x/STM32F09x)
+         (++)WakeUp Pin 7 on PB.15.(STM32F07x/STM32F09x)
+         (++)WakeUp Pin 8 on PF.02.(STM32F07x/STM32F09x)
+
+    *** Low Power modes configuration ***
+    =====================================
+    [..]
+      The devices feature 3 low-power modes:
+      (+) Sleep mode: Cortex-M0 core stopped, peripherals kept running.
+      (+) Stop mode: all clocks are stopped, regulator running, regulator
+          in low power mode
+      (+) Standby mode: 1.2V domain powered off (mode not available on STM32F0x8 devices).
+
+   *** Sleep mode ***
+   ==================
+    [..]
+      (+) Entry:
+          The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
+              functions with
+          (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+          (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+     
+      (+) Exit:
+        (++) Any peripheral interrupt acknowledged by the nested vectored interrupt
+              controller (NVIC) can wake up the device from Sleep mode.
+
+   *** Stop mode ***
+   =================
+    [..]
+      In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI,
+      and the HSE RC oscillators are disabled. Internal SRAM and register contents
+      are preserved.
+      The voltage regulator can be configured either in normal or low-power mode.
+      To minimize the consumption.
+
+      (+) Entry:
+          The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI )
+             function with:
+          (++) Main regulator ON.
+          (++) Low Power regulator ON.
+          (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction
+          (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction
+      (+) Exit:
+          (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+          (++) Some specific communication peripherals (CEC, USART, I2C) interrupts, 
+               when programmed in wakeup mode (the peripheral must be 
+               programmed in wakeup mode and the corresponding interrupt vector 
+               must be enabled in the NVIC)
+
+   *** Standby mode ***
+   ====================
+     [..]
+      The Standby mode allows to achieve the lowest power consumption. It is based
+      on the Cortex-M0 deep sleep mode, with the voltage regulator disabled.
+      The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and
+      the HSE oscillator are also switched off. SRAM and register contents are lost
+      except for the RTC registers, RTC backup registers and Standby circuitry.
+      The voltage regulator is OFF.
+
+      (+) Entry:
+          (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+      (+) Exit:
+          (++) WKUP pin rising edge, RTC alarm (Alarm A), RTC wakeup,
+               tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+   *** Auto-wakeup (AWU) from low-power mode ***
+   =============================================
+    [..]
+      The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+      Wakeup event, a tamper event, a time-stamp event, or a comparator event, 
+      without depending on an external interrupt (Auto-wakeup mode).
+
+    (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
+
+      (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+            configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+      (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+           is necessary to configure the RTC to detect the tamper or time stamp event using the
+           HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions.
+
+      (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+           configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() function.
+
+    (+) Comparator auto-wakeup (AWU) from the Stop mode
+
+      (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to:
+           (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for comparator 2) 
+                 to be sensitive to to the selected edges (falling, rising or falling 
+                 and rising) (Interrupt or Event modes) using the EXTI_Init() function.
+           (+++) Configure the comparator to generate the event.      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Enables the WakeUp PINx functionality.
+  * @param WakeUpPinx Specifies the Power Wake-Up pin to enable.
+  *         This parameter can be value of :
+  *           @ref PWREx_WakeUp_Pins
+  * @retval None
+  */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+  /* Enable the EWUPx pin */
+  SET_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+  * @brief Disables the WakeUp PINx functionality.
+  * @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
+  *         This parameter can be values of :
+  *           @ref PWREx_WakeUp_Pins
+  * @retval None
+  */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+  /* Disable the EWUPx pin */
+  CLEAR_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+  * @brief Enters Sleep mode.
+  * @note  In Sleep mode, all I/O pins keep the same state as in Run mode.
+  * @param Regulator Specifies the regulator state in SLEEP mode.
+  *           On STM32F0 devices, this parameter is a dummy value and it is ignored
+  *           as regulator can't be modified in this mode. Parameter is kept for platform
+  *           compatibility.
+  * @param SLEEPEntry Specifies if SLEEP mode is entered with WFI or WFE instruction.
+  *           When WFI entry is used, tick interrupt have to be disabled if not desired as 
+  *           the interrupt wake up source.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+  /* Select SLEEP mode entry -------------------------------------------------*/
+  if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+}
+
+/**
+  * @brief Enters STOP mode.
+  * @note  In Stop mode, all I/O pins keep the same state as in Run mode.
+  * @note  When exiting Stop mode by issuing an interrupt or a wakeup event,
+  *         the HSI RC oscillator is selected as system clock.
+  * @note  When the voltage regulator operates in low power mode, an additional
+  *         startup delay is incurred when waking up from Stop mode.
+  *         By keeping the internal regulator ON during Stop mode, the consumption
+  *         is higher although the startup time is reduced.
+  * @param Regulator Specifies the regulator state in STOP mode.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON
+  * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction
+  *            @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+  /* Select the regulator state in STOP mode ---------------------------------*/
+  tmpreg = PWR->CR;
+  
+  /* Clear PDDS and LPDS bits */
+  tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS);
+
+  /* Set LPDS bit according to Regulator value */
+  tmpreg |= Regulator;
+
+  /* Store the new value */
+  PWR->CR = tmpreg;
+
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+  /* Select STOP mode entry --------------------------------------------------*/
+  if(STOPEntry == PWR_STOPENTRY_WFI)
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+}
+
+/**
+  * @brief Enters STANDBY mode.
+  * @note  In Standby mode, all I/O pins are high impedance except for:
+  *          - Reset pad (still available)
+  *          - RTC alternate function pins if configured for tamper, time-stamp, RTC
+  *            Alarm out, or RTC clock calibration out.
+  *          - WKUP pins if enabled.
+  *            STM32F0x8 devices, the Stop mode is available, but it is 
+  *            aningless to distinguish between voltage regulator in Low power 
+  *            mode and voltage regulator in Run mode because the regulator 
+  *            not used and the core is supplied directly from an external source.
+  *            Consequently, the Standby mode is not available on those devices.
+  * @retval None
+  */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+  /* Select STANDBY mode */
+  PWR->CR |= (uint32_t)PWR_CR_PDDS;
+
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+  /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+  __force_stores();
+#endif
+  /* Request Wait For Interrupt */
+  __WFI();
+}
+
+/**
+  * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. 
+  * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor 
+  *       re-enters SLEEP mode when an interruption handling is over.
+  *       Setting this bit is useful when the processor is expected to run only on
+  *       interruptions handling.         
+  * @retval None
+  */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+/**
+  * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. 
+  * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor 
+  *       re-enters SLEEP mode when an interruption handling is over.          
+  * @retval None
+  */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+
+/**
+  * @brief Enables CORTEX M4 SEVONPEND bit. 
+  * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes 
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+  /* Set SEVONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+
+/**
+  * @brief Disables CORTEX M4 SEVONPEND bit. 
+  * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes 
+  *       WFE to wake up when an interrupt moves from inactive to pended.         
+  * @retval None
+  */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+  /* Clear SEVONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c
new file mode 100644
index 0000000..c14370b
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c
@@ -0,0 +1,274 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_pwr_ex.c
+  * @author  MCD Application Team
+  * @brief   Extended PWR HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Power Controller (PWR) peripheral:
+  *           + Extended Initialization and de-initialization functions
+  *           + Extended Peripheral Control functions
+  *         
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWREx PWREx
+  * @brief    PWREx HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+  * @{
+  */
+#define PVD_MODE_IT               (0x00010000U)
+#define PVD_MODE_EVT              (0x00020000U)
+#define PVD_RISING_EDGE           (0x00000001U)
+#define PVD_FALLING_EDGE          (0x00000002U)
+/**
+  * @}
+  */
+ 
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+  * @{
+  */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
+  *  @brief   Extended Peripheral Control functions
+  *
+@verbatim
+
+ ===============================================================================
+                 ##### Peripheral extended control functions #####
+ ===============================================================================
+    
+    *** PVD configuration ***
+    =========================
+    [..]
+      (+) The PVD is used to monitor the VDD power supply by comparing it to a
+          threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+      (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+          than the PVD threshold. This event is internally connected to the EXTI
+          line16 and can generate an interrupt if enabled. This is done through
+          HAL_PWR_ConfigPVD(), HAL_PWR_EnablePVD() functions.
+      (+) The PVD is stopped in Standby mode.
+      -@- PVD is not available on STM32F030x4/x6/x8
+
+    *** VDDIO2 Monitor Configuration ***
+    ====================================
+    [..]
+      (+) VDDIO2 monitor is used to monitor the VDDIO2 power supply by comparing it 
+          to VREFInt Voltage
+      (+) This monitor is internally connected to the EXTI line31
+          and can generate an interrupt if enabled. This is done through
+          HAL_PWREx_EnableVddio2Monitor() function.
+      -@- VDDIO2 is available on STM32F07x/09x/04x
+                    
+@endverbatim
+  * @{
+  */
+
+#if defined (STM32F031x6) || defined (STM32F051x8) || \
+    defined (STM32F071xB) || defined (STM32F091xC) || \
+    defined (STM32F042x6) || defined (STM32F072xB)
+/**
+  * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+  * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
+  *        information for the PVD.
+  * @note Refer to the electrical characteristics of your device datasheet for
+  *         more details about the voltage threshold corresponding to each
+  *         detection level.
+  * @retval None
+  */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+  assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+  /* Set PLS[7:5] bits according to PVDLevel value */
+  MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+  
+  /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+  __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+  __HAL_PWR_PVD_EXTI_DISABLE_IT();
+  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+  /* Configure interrupt mode */
+  if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_IT();
+  }
+  
+  /* Configure event mode */
+  if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+  }
+  
+  /* Configure the edge */
+  if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+  }
+  
+  if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+  }
+}
+
+/**
+  * @brief Enables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_EnablePVD(void)
+{
+  PWR->CR |= (uint32_t)PWR_CR_PVDE;
+}
+
+/**
+  * @brief Disables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_DisablePVD(void)
+{
+  PWR->CR &= ~((uint32_t)PWR_CR_PVDE);
+}
+
+/**
+  * @brief This function handles the PWR PVD interrupt request.
+  * @note This API should be called under the  PVD_IRQHandler() or PVD_VDDIO2_IRQHandler().
+  * @retval None
+  */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+  /* Check PWR exti flag */
+  if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+  {
+    /* PWR PVD interrupt user callback */
+    HAL_PWR_PVDCallback();
+
+    /* Clear PWR Exti pending bit */
+    __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+  }
+}
+
+/**
+  * @brief PWR PVD interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWR_PVDCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWR_PVDCallback could be implemented in the user file
+   */
+}
+
+#endif /* defined (STM32F031x6) || defined (STM32F051x8) || */
+       /* defined (STM32F071xB) || defined (STM32F091xC) || */
+       /* defined (STM32F042x6) || defined (STM32F072xB)    */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+    defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+    defined (STM32F091xC) || defined (STM32F098xx)
+/**
+  * @brief Enable VDDIO2 monitor: enable Exti 31 and falling edge detection.
+  * @note If Exti 31 is enable correlty and VDDIO2 voltage goes below Vrefint,
+          an interrupt is generated Irq line 1.
+          NVIS has to be enable by user.
+  * @retval None
+  */
+void HAL_PWREx_EnableVddio2Monitor(void)
+{
+  __HAL_PWR_VDDIO2_EXTI_ENABLE_IT();
+  __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE();
+}
+
+/**
+  * @brief Disable the Vddio2 Monitor.
+  * @retval None
+  */
+void HAL_PWREx_DisableVddio2Monitor(void)
+{
+  __HAL_PWR_VDDIO2_EXTI_DISABLE_IT();
+  __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE();
+
+}
+
+/**
+  * @brief This function handles the PWR Vddio2 monitor interrupt request.
+  * @note This API should be called under the VDDIO2_IRQHandler() PVD_VDDIO2_IRQHandler().
+  * @retval None
+  */
+void HAL_PWREx_Vddio2Monitor_IRQHandler(void)
+{
+  /* Check PWR exti flag */
+  if(__HAL_PWR_VDDIO2_EXTI_GET_FLAG() != RESET)
+  {
+    /* PWR Vddio2 monitor interrupt user callback */
+    HAL_PWREx_Vddio2MonitorCallback();
+
+    /* Clear PWR Exti pending bit */
+    __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG();
+  }
+}
+
+/**
+  * @brief PWR Vddio2 Monitor interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWREx_Vddio2MonitorCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWREx_Vddio2MonitorCallback could be implemented in the user file
+   */
+}
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+          defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+          defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c
new file mode 100644
index 0000000..fbe2bf5
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c
@@ -0,0 +1,1365 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_rcc.c
+  * @author  MCD Application Team
+  * @brief   RCC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Reset and Clock Control (RCC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *       
+  @verbatim                
+  ==============================================================================
+                      ##### RCC specific features #####
+  ==============================================================================
+    [..]  
+      After reset the device is running from Internal High Speed oscillator
+      (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is disabled, 
+      and all peripherals are off except internal SRAM, Flash and JTAG.
+      (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses;
+          all peripherals mapped on these buses are running at HSI speed.
+      (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+      (+) All GPIOs are in input floating state, except the JTAG pins which
+          are assigned to be used for debug purpose.
+    [..] Once the device started from reset, the user application has to:
+      (+) Configure the clock source to be used to drive the System clock
+          (if the application needs higher frequency/performance)
+      (+) Configure the System clock frequency and Flash settings  
+      (+) Configure the AHB and APB buses prescalers
+      (+) Enable the clock for the peripheral(s) to be used
+      (+) Configure the clock source(s) for peripherals whose clocks are not
+          derived from the System clock (RTC, ADC, I2C, USART, TIM, USB FS, etc..)
+
+                      ##### RCC Limitations #####
+  ==============================================================================
+    [..]  
+      A delay between an RCC peripheral clock enable and the effective peripheral 
+      enabling should be taken into account in order to manage the peripheral read/write 
+      from/to registers.
+      (+) This delay depends on the peripheral mapping.
+        (++) AHB & APB peripherals, 1 dummy read is necessary
+
+    [..]  
+      Workarounds:
+      (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+          inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RCC RCC
+* @brief RCC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+  * @{
+  */
+
+#define MCO1_CLK_ENABLE()     __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT        GPIOA
+#define MCO1_PIN              GPIO_PIN_8
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+  * @{
+  */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ===============================================================================
+           ##### Initialization and de-initialization functions #####
+  ===============================================================================
+    [..]
+      This section provides functions allowing to configure the internal/external oscillators
+      (HSE, HSI, HSI14, HSI48, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, 
+      AHB and APB1).
+
+    [..] Internal/external clock and PLL configuration
+      (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through
+          the PLL as System clock source.
+          The HSI clock can be used also to clock the USART and I2C peripherals.
+
+      (#) HSI14 (high-speed internal), 14 MHz factory-trimmed RC used directly to clock 
+          the ADC peripheral.
+
+      (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC
+          clock source.
+
+      (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or
+          through the PLL as System clock source. Can be used also as RTC clock source.
+
+      (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.   
+
+      (#) PLL (clocked by HSI, HSI48 or HSE), featuring different output clocks:
+       (++) The first output is used to generate the high speed system clock (up to 48 MHz)
+       (++) The second output is used to generate the clock for the USB FS (48 MHz)
+       (++) The third output may be used to generate the clock for the TIM, I2C and USART 
+            peripherals (up to 48 MHz)
+
+      (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+          and if a HSE clock failure occurs(HSE used directly or through PLL as System 
+          clock source), the System clocks automatically switched to HSI and an interrupt
+          is generated if enabled. The interrupt is linked to the Cortex-M0 NMI 
+          (Non-Maskable Interrupt) exception vector.   
+
+      (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL
+          clock (divided by 2) output on pin (such as PA8 pin).
+
+    [..] System, AHB and APB buses clocks configuration
+      (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+          HSE and PLL.
+          The AHB clock (HCLK) is derived from System clock through configurable
+          prescaler and used to clock the CPU, memory and peripherals mapped
+          on AHB bus (DMA, GPIO...). APB1 (PCLK1) clock is derived
+          from AHB clock through configurable prescalers and used to clock
+          the peripherals mapped on these buses. You can use
+          "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+      (#) All the peripheral clocks are derived from the System clock (SYSCLK) except:
+        (++) The FLASH program/erase clock  which is always HSI 8MHz clock.
+        (++) The USB 48 MHz clock which is derived from the PLL VCO clock.
+        (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE.
+        (++) The I2C clock which can be derived as well from HSI 8MHz clock.
+        (++) The ADC clock which is derived from PLL output.
+        (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC
+             (HSE divided by a programmable prescaler). The System clock (SYSCLK)
+             frequency must be higher or equal to the RTC clock frequency.
+        (++) IWDG clock which is always the LSI clock.
+
+      (#) For the STM32F0xx devices, the maximum frequency of the SYSCLK, HCLK and PCLK1 is 48 MHz,
+          Depending on the SYSCLK frequency, the flash latency should be adapted accordingly.
+
+      (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and
+          prefetch is disabled.
+  @endverbatim
+  * @{
+  */
+  
+/*
+  Additional consideration on the SYSCLK based on Latency settings:
+          +-----------------------------------------------+
+          | Latency       | SYSCLK clock frequency (MHz)  |
+          |---------------|-------------------------------|
+          |0WS(1CPU cycle)|       0 < SYSCLK <= 24        |
+          |---------------|-------------------------------|
+          |1WS(2CPU cycle)|      24 < SYSCLK <= 48        |
+          +-----------------------------------------------+
+  */
+
+/**
+  * @brief  Resets the RCC clock configuration to the default reset state.
+  * @note   The default reset state of the clock configuration is given below:
+  *            - HSI ON and used as system clock source
+  *            - HSE and PLL OFF
+  *            - AHB, APB1 prescaler set to 1.
+  *            - CSS and MCO1 OFF
+  *            - All interrupts disabled
+  *            - All interrupt and reset flags cleared
+  * @note   This function does not modify the configuration of the
+  *            - Peripheral clocks
+  *            - LSI, LSE and RTC clocks
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_DeInit(void)
+{
+  uint32_t tickstart;
+
+  /* Get Start Tick*/
+  tickstart = HAL_GetTick();
+  
+  /* Set HSION bit, HSITRIM[4:0] bits to the reset value*/
+  SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4); 
+
+  /* Wait till HSI is ready */
+  while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Reset SW[1:0], HPRE[3:0], PPRE[2:0] and MCOSEL[2:0] bits */
+  CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE | RCC_CFGR_MCO);
+
+  /* Wait till HSI as SYSCLK status is enabled */
+  while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET)
+  {
+    if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Update the SystemCoreClock global variable for HSI as system clock source */
+  SystemCoreClock = HSI_VALUE;
+
+  /* Adapt Systick interrupt period */
+  if (HAL_InitTick(uwTickPrio) != HAL_OK)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Reset HSEON, CSSON, PLLON bits */
+  CLEAR_BIT(RCC->CR, RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON);
+  
+  /* Reset HSEBYP bit */
+  CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+  /* Get start tick */
+  tickstart = HAL_GetTick();
+  
+  /* Wait till PLLRDY is cleared */
+  while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET)
+  {
+    if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Reset CFGR register */
+  CLEAR_REG(RCC->CFGR);
+
+  /* Reset CFGR2 register */
+  CLEAR_REG(RCC->CFGR2);
+
+  /* Reset CFGR3 register */
+  CLEAR_REG(RCC->CFGR3);
+
+  /* Disable all interrupts */
+  CLEAR_REG(RCC->CIR);
+
+  /* Clear all reset flags */
+  __HAL_RCC_CLEAR_RESET_FLAGS();
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the RCC Oscillators according to the specified parameters in the
+  *         RCC_OscInitTypeDef.
+  * @param  RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC Oscillators.
+  * @note   The PLL is not disabled when used as system clock.
+  * @note   Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+  *         supported by this macro. User should request a transition to LSE Off
+  *         first and then LSE On or LSE Bypass.
+  * @note   Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+  *         supported by this macro. User should request a transition to HSE Off
+  *         first and then HSE On or HSE Bypass.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  uint32_t tickstart;
+  uint32_t pll_config;
+  uint32_t pll_config2;
+
+  /* Check Null pointer */
+  if(RCC_OscInitStruct == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+
+  /*------------------------------- HSE Configuration ------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+
+    /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) 
+       || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)))
+    {
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+      {
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Set the new HSE configuration ---------------------------------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+      
+
+       /* Check the HSE State */
+      if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+      {
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till HSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till HSE is disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+        {
+           if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*----------------------------- HSI Configuration --------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+    
+    /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ 
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) 
+       || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI)))
+    {
+      /* When HSI is used as system clock it will not disabled */
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+      {
+        return HAL_ERROR;
+      }
+      /* Otherwise, just the calibration is allowed */
+      else
+      {
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+    }
+    else
+    {
+      /* Check the HSI State */
+      if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF)
+      {
+       /* Enable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_ENABLE();
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+                
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_DISABLE();
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till HSI is disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*------------------------------ LSI Configuration -------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+    
+    /* Check the LSI State */
+    if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF)
+    {
+      /* Enable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_ENABLE();
+      
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSI is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Disable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_DISABLE();
+      
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSI is disabled */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*------------------------------ LSE Configuration -------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+  {
+    FlagStatus       pwrclkchanged = RESET;
+    
+    /* Check the parameters */
+    assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+    /* Update LSE configuration in Backup Domain control register    */
+    /* Requires to enable write access to Backup Domain of necessary */
+    if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+    {
+      __HAL_RCC_PWR_CLK_ENABLE();
+      pwrclkchanged = SET;
+    }
+    
+    if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+    {
+      /* Enable write access to Backup domain */
+      SET_BIT(PWR->CR, PWR_CR_DBP);
+      
+      /* Wait for Backup domain Write protection disable */
+      tickstart = HAL_GetTick();
+
+      while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+      {
+        if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Set the new LSE configuration -----------------------------------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+    /* Check the LSE State */
+    if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF)
+    {
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSE is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSE is disabled */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Require to disable power clock if necessary */
+    if(pwrclkchanged == SET)
+    {
+      __HAL_RCC_PWR_CLK_DISABLE();
+    }
+  }
+
+  /*----------------------------- HSI14 Configuration --------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue));
+
+    /* Check the HSI14 State */
+    if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON)
+    {
+      /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+      __HAL_RCC_HSI14ADC_DISABLE();
+
+      /* Enable the Internal High Speed oscillator (HSI). */
+      __HAL_RCC_HSI14_ENABLE();
+
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+      
+      /* Wait till HSI is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }      
+      } 
+
+      /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+      __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+    }
+    else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL)
+    {
+      /* Enable ADC control of the Internal High Speed oscillator HSI14 */
+      __HAL_RCC_HSI14ADC_ENABLE();
+
+      /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+      __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+    }
+    else
+    {
+      /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+      __HAL_RCC_HSI14ADC_DISABLE();
+
+      /* Disable the Internal High Speed oscillator (HSI). */
+      __HAL_RCC_HSI14_DISABLE();
+
+      /* Get Start Tick */
+      tickstart = HAL_GetTick();
+      
+      /* Wait till HSI is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+
+#if defined(RCC_HSI48_SUPPORT)
+  /*----------------------------- HSI48 Configuration --------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State));
+
+    /* When the HSI48 is used as system clock it is not allowed to be disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI48) ||
+       ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI48)))
+    {
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET) && (RCC_OscInitStruct->HSI48State != RCC_HSI48_ON))
+      {
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Check the HSI48 State */
+      if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF)
+      {
+        /* Enable the Internal High Speed oscillator (HSI48). */
+        __HAL_RCC_HSI48_ENABLE();
+
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+      
+        /* Wait till HSI48 is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        } 
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI48). */
+        __HAL_RCC_HSI48_DISABLE();
+
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+      
+        /* Wait till HSI48 is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+#endif /* RCC_HSI48_SUPPORT */
+       
+  /*-------------------------------- PLL Configuration -----------------------*/
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+  if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+  {
+    /* Check if the PLL is used as system clock or not */
+    if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+    { 
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+      {
+        /* Check the parameters */
+        assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+        assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL));
+        assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV));
+  
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till PLL is disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Configure the main PLL clock source, predivider and multiplication factor. */
+        __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+                             RCC_OscInitStruct->PLL.PREDIV,
+                             RCC_OscInitStruct->PLL.PLLMUL);
+        /* Enable the main PLL. */
+        __HAL_RCC_PLL_ENABLE();
+        
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+ 
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till PLL is disabled */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY)  != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    else
+    {
+      /* Check if there is a request to disable the PLL used as System clock source */
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Do not return HAL_ERROR if request repeats the current configuration */
+        pll_config  = RCC->CFGR;
+        pll_config2 = RCC->CFGR2;
+        if((READ_BIT(pll_config,  RCC_CFGR_PLLSRC)  != RCC_OscInitStruct->PLL.PLLSource) ||
+           (READ_BIT(pll_config2, RCC_CFGR2_PREDIV) != RCC_OscInitStruct->PLL.PREDIV)    ||
+           (READ_BIT(pll_config,  RCC_CFGR_PLLMUL)  != RCC_OscInitStruct->PLL.PLLMUL))
+        {
+          return HAL_ERROR;
+        }
+      }
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CPU, AHB and APB buses clocks according to the specified 
+  *         parameters in the RCC_ClkInitStruct.
+  * @param  RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC peripheral.
+  * @param  FLatency FLASH Latency                   
+  *          The value of this parameter depend on device used within the same series
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency 
+  *         and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function
+  *
+  * @note   The HSI is used (enabled by hardware) as system clock source after
+  *         start-up from Reset, wake-up from STOP and STANDBY mode, or in case
+  *         of failure of the HSE used directly or indirectly as system clock
+  *         (if the Clock Security System CSS is enabled).
+  *           
+  * @note   A switch from one clock source to another occurs only if the target
+  *         clock source is ready (clock stable after start-up delay or PLL locked). 
+  *         If a clock source which is not yet ready is selected, the switch will
+  *         occur when the clock source will be ready. 
+  *         You can use @ref HAL_RCC_GetClockConfig() function to know which clock is
+  *         currently used as system clock source.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t FLatency)
+{
+  uint32_t tickstart;
+
+  /* Check Null pointer */
+  if(RCC_ClkInitStruct == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+  assert_param(IS_FLASH_LATENCY(FLatency));
+
+  /* To correctly read data from FLASH memory, the number of wait states (LATENCY) 
+  must be correctly programmed according to the frequency of the CPU clock 
+    (HCLK) of the device. */
+
+  /* Increasing the number of wait states because of higher CPU frequency */
+  if(FLatency > __HAL_FLASH_GET_LATENCY())
+  {    
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+    
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if(__HAL_FLASH_GET_LATENCY() != FLatency)
+    {
+      return HAL_ERROR;
+    }
+  }
+
+  /*-------------------------- HCLK Configuration --------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+  {
+    /* Set the highest APB divider in order to ensure that we do not go through
+       a non-spec phase whatever we decrease or increase HCLK. */
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+    {
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16);
+    }
+
+    /* Set the new HCLK clock divider */
+    assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+  }
+
+  /*------------------------- SYSCLK Configuration ---------------------------*/ 
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+  {
+    assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+    
+    /* HSE is selected as System Clock Source */
+    if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+    {
+      /* Check the HSE ready flag */  
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+      {
+        return HAL_ERROR;
+      }
+    }
+    /* PLL is selected as System Clock Source */
+    else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+    {
+      /* Check the PLL ready flag */  
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+      {
+        return HAL_ERROR;
+      }
+    }
+#if defined(RCC_CFGR_SWS_HSI48)
+    /* HSI48 is selected as System Clock Source */
+    else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+    {
+      /* Check the HSI48 ready flag */
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+      {
+        return HAL_ERROR;
+      }
+    }
+#endif /* RCC_CFGR_SWS_HSI48 */
+    /* HSI is selected as System Clock Source */
+    else
+    {
+      /* Check the HSI ready flag */  
+      if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+      {
+        return HAL_ERROR;
+      }
+    }
+    __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    
+    while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos))
+    {
+      if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Decreasing the number of wait states because of lower CPU frequency */
+  if(FLatency < __HAL_FLASH_GET_LATENCY())
+  {    
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+    
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if(__HAL_FLASH_GET_LATENCY() != FLatency)
+    {
+      return HAL_ERROR;
+    }
+  }    
+
+  /*-------------------------- PCLK1 Configuration ---------------------------*/ 
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider);
+  }
+  
+  /* Update the SystemCoreClock global variable */
+  SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
+
+  /* Configure the source of time base considering new system clocks settings*/
+  HAL_InitTick (TICK_INT_PRIORITY);
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+  *  @brief   RCC clocks control functions
+  *
+  @verbatim   
+  ===============================================================================
+                  ##### Peripheral Control functions #####
+  ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks 
+    frequencies.
+
+  @endverbatim
+  * @{
+  */
+
+#if defined(RCC_CFGR_MCOPRE)
+/**
+  * @brief  Selects the clock source to output on MCO pin.
+  * @note   MCO pin should be configured in alternate function mode.
+  * @param  RCC_MCOx specifies the output direction for the clock source.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8).
+  * @param  RCC_MCOSource specifies the clock source to output.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCO1SOURCE_NOCLOCK     No clock selected
+  *            @arg @ref RCC_MCO1SOURCE_SYSCLK      System Clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI         HSI selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSE         HSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSI         LSI selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSE         LSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI14       HSI14 selected as MCO clock
+  @if STM32F042x6
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F048xx
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F071xB
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F072xB
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F078xx
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F091xC
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elseif STM32F098xx
+  *            @arg @ref RCC_MCO1SOURCE_HSI48       HSI48 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elif STM32F030x6
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elif STM32F030xC
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elif STM32F031x6
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elif STM32F038xx
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elif STM32F070x6
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @elif STM32F070xB
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK      PLLCLK selected as MCO clock
+  @endif
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+  * @param  RCC_MCODiv specifies the MCO DIV.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCODIV_1   no division applied to MCO clock
+  *            @arg @ref RCC_MCODIV_2   division by 2 applied to MCO clock
+  *            @arg @ref RCC_MCODIV_4   division by 4 applied to MCO clock
+  *            @arg @ref RCC_MCODIV_8   division by 8 applied to MCO clock
+  *            @arg @ref RCC_MCODIV_16  division by 16 applied to MCO clock
+  *            @arg @ref RCC_MCODIV_32  division by 32 applied to MCO clock
+  *            @arg @ref RCC_MCODIV_64  division by 64 applied to MCO clock
+  *            @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock
+  * @retval None
+  */
+#else
+/**
+  * @brief  Selects the clock source to output on MCO pin.
+  * @note   MCO pin should be configured in alternate function mode.
+  * @param  RCC_MCOx specifies the output direction for the clock source.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8).
+  * @param  RCC_MCOSource specifies the clock source to output.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCO1SOURCE_NOCLOCK     No clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_SYSCLK      System clock selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI         HSI selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSE         HSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSI         LSI selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_LSE         LSE selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_HSI14       HSI14 selected as MCO clock
+  *            @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+  * @param  RCC_MCODiv specifies the MCO DIV.
+  *          This parameter can be one of the following values:
+  *            @arg @ref RCC_MCODIV_1 no division applied to MCO clock
+  * @retval None
+  */
+#endif
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+  GPIO_InitTypeDef gpio;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_MCO(RCC_MCOx));
+  assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+  assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+  
+  /* Configure the MCO1 pin in alternate function mode */
+  gpio.Mode      = GPIO_MODE_AF_PP;
+  gpio.Speed     = GPIO_SPEED_FREQ_HIGH;
+  gpio.Pull      = GPIO_NOPULL;
+  gpio.Pin       = MCO1_PIN;
+  gpio.Alternate = GPIO_AF0_MCO;
+
+  /* MCO1 Clock Enable */
+  MCO1_CLK_ENABLE();
+  
+  HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio);
+  
+  /* Configure the MCO clock source */
+  __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv);
+}
+
+/**
+  * @brief  Enables the Clock Security System.
+  * @note   If a failure is detected on the HSE oscillator clock, this oscillator
+  *         is automatically disabled and an interrupt is generated to inform the
+  *         software about the failure (Clock Security System Interrupt, CSSI),
+  *         allowing the MCU to perform rescue operations. The CSSI is linked to 
+  *         the Cortex-M0 NMI (Non-Maskable Interrupt) exception vector.  
+  * @retval None
+  */
+void HAL_RCC_EnableCSS(void)
+{
+  SET_BIT(RCC->CR, RCC_CR_CSSON) ;
+}
+
+/**
+  * @brief  Disables the Clock Security System.
+  * @retval None
+  */
+void HAL_RCC_DisableCSS(void)
+{
+  CLEAR_BIT(RCC->CR, RCC_CR_CSSON) ;
+}
+
+/**
+  * @brief  Returns the SYSCLK frequency     
+  * @note   The system frequency computed by this function is not the real 
+  *         frequency in the chip. It is calculated based on the predefined 
+  *         constant and the selected clock source:
+  * @note     If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+  * @note     If SYSCLK source is HSE, function returns a value based on HSE_VALUE
+  *           divided by PREDIV factor(**)
+  * @note     If SYSCLK source is PLL, function returns a value based on HSE_VALUE
+  *           divided by PREDIV factor(**) or depending on STM32F0xxxx devices either a value based 
+  *           on HSI_VALUE divided by 2 or HSI_VALUE divided by PREDIV factor(*) multiplied by the 
+  *           PLL factor.
+  * @note     (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
+  *               8 MHz) but the real value may vary depending on the variations
+  *               in voltage and temperature.
+  * @note     (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
+  *                8 MHz), user has to ensure that HSE_VALUE is same as the real
+  *                frequency of the crystal used. Otherwise, this function may
+  *                have wrong result.
+  *                  
+  * @note   The result of this function could be not correct when using fractional
+  *         value for HSE crystal.
+  *           
+  * @note   This function can be used by the user application to compute the 
+  *         baud-rate for the communication peripherals or configure other parameters.
+  *           
+  * @note   Each time SYSCLK changes, this function must be called to update the
+  *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *         
+  * @retval SYSCLK frequency
+  */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+  const uint8_t aPLLMULFactorTable[16] = { 2U,  3U,  4U,  5U,  6U,  7U,  8U,  9U,
+                                         10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U};
+  const uint8_t aPredivFactorTable[16] = { 1U, 2U,  3U,  4U,  5U,  6U,  7U,  8U,
+                                           9U,10U, 11U, 12U, 13U, 14U, 15U, 16U};
+
+  uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U;
+  uint32_t sysclockfreq = 0U;
+  
+  tmpreg = RCC->CFGR;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (tmpreg & RCC_CFGR_SWS)
+  {
+    case RCC_SYSCLKSOURCE_STATUS_HSE:  /* HSE used as system clock */
+    {
+      sysclockfreq = HSE_VALUE;
+      break;
+    }
+    case RCC_SYSCLKSOURCE_STATUS_PLLCLK:  /* PLL used as system clock */
+    {
+      pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER];
+      prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER];
+      if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+      {
+        /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+        pllclk = (uint32_t)((uint64_t) HSE_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul);
+      }
+#if defined(RCC_CFGR_PLLSRC_HSI48_PREDIV)
+      else if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSI48)
+      {
+        /* HSI48 used as PLL clock source : PLLCLK = HSI48/PREDIV * PLLMUL */
+        pllclk = (uint32_t)((uint64_t) HSI48_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul);
+      }
+#endif /* RCC_CFGR_PLLSRC_HSI48_PREDIV */
+      else
+      {
+#if  (defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC))
+        /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+        pllclk = (uint32_t)((uint64_t) HSI_VALUE / (uint64_t) (prediv)) * ((uint64_t) pllmul);
+#else
+        /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
+        pllclk = (uint32_t)((uint64_t) (HSI_VALUE >> 1U) * ((uint64_t) pllmul));
+#endif
+      }
+      sysclockfreq = pllclk;
+      break;
+    }
+#if defined(RCC_CFGR_SWS_HSI48)
+    case RCC_SYSCLKSOURCE_STATUS_HSI48:    /* HSI48 used as system clock source */
+    {
+      sysclockfreq = HSI48_VALUE;
+      break;
+    }
+#endif /* RCC_CFGR_SWS_HSI48 */
+    case RCC_SYSCLKSOURCE_STATUS_HSI:  /* HSI used as system clock source */
+    default: /* HSI used as system clock */
+    {
+      sysclockfreq = HSI_VALUE;
+      break;
+    }
+  }
+  return sysclockfreq;
+}
+
+/**
+  * @brief  Returns the HCLK frequency     
+  * @note   Each time HCLK changes, this function must be called to update the
+  *         right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+  * 
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency 
+  *         and updated within this function
+  * @retval HCLK frequency
+  */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+  return SystemCoreClock;
+}
+
+/**
+  * @brief  Returns the PCLK1 frequency     
+  * @note   Each time PCLK1 changes, this function must be called to update the
+  *         right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+  * @retval PCLK1 frequency
+  */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+  /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+  return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE) >> RCC_CFGR_PPRE_BITNUMBER]);
+}    
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal 
+  * RCC configuration registers.
+  * @param  RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that 
+  * will be configured.
+  * @retval None
+  */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  /* Check the parameters */
+  assert_param(RCC_OscInitStruct != NULL);
+
+  /* Set all possible values for the Oscillator type parameter ---------------*/
+  RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI  \
+                  | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI14;
+#if defined(RCC_HSI48_SUPPORT)
+  RCC_OscInitStruct->OscillatorType |= RCC_OSCILLATORTYPE_HSI48;
+#endif /* RCC_HSI48_SUPPORT */
+
+
+  /* Get the HSE configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+  }
+  else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+  }
+
+  /* Get the HSI configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+  }
+  
+  RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_BitNumber);
+  
+  /* Get the LSE configuration -----------------------------------------------*/
+  if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+  }
+  else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+  }
+  
+  /* Get the LSI configuration -----------------------------------------------*/
+  if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+  }
+  
+  /* Get the HSI14 configuration -----------------------------------------------*/
+  if((RCC->CR2 & RCC_CR2_HSI14ON) == RCC_CR2_HSI14ON)
+  {
+    RCC_OscInitStruct->HSI14State = RCC_HSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSI14State = RCC_HSI_OFF;
+  }
+
+  RCC_OscInitStruct->HSI14CalibrationValue = (uint32_t)((RCC->CR2 & RCC_CR2_HSI14TRIM) >> RCC_HSI14TRIM_BIT_NUMBER);
+  
+#if defined(RCC_HSI48_SUPPORT)
+  /* Get the HSI48 configuration if any-----------------------------------------*/
+  RCC_OscInitStruct->HSI48State = __HAL_RCC_GET_HSI48_STATE();
+#endif /* RCC_HSI48_SUPPORT */
+
+  /* Get the PLL configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+  }
+  RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC);
+  RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL);
+  RCC_OscInitStruct->PLL.PREDIV = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV);
+}
+
+/**
+  * @brief  Get the RCC_ClkInitStruct according to the internal 
+  * RCC configuration registers.
+  * @param  RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that 
+  * contains the current clock configuration.
+  * @param  pFLatency Pointer on the Flash Latency.
+  * @retval None
+  */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+  /* Check the parameters */
+  assert_param(RCC_ClkInitStruct != NULL);
+  assert_param(pFLatency != NULL);
+
+  /* Set all possible values for the Clock type parameter --------------------*/
+  RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1;
+  
+  /* Get the SYSCLK configuration --------------------------------------------*/ 
+  RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+  
+  /* Get the HCLK configuration ----------------------------------------------*/ 
+  RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); 
+  
+  /* Get the APB1 configuration ----------------------------------------------*/ 
+  RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE);   
+  /* Get the Flash Wait State (Latency) configuration ------------------------*/   
+  *pFLatency = __HAL_FLASH_GET_LATENCY(); 
+}
+
+/**
+  * @brief This function handles the RCC CSS interrupt request.
+  * @note This API should be called under the NMI_Handler().
+  * @retval None
+  */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+  /* Check RCC CSSF flag  */
+  if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+  {
+    /* RCC Clock Security System interrupt user callback */
+    HAL_RCC_CSSCallback();
+    
+    /* Clear RCC CSS pending bit */
+    __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+  }
+}
+
+/**
+  * @brief  RCC Clock Security System interrupt callback
+  * @retval none
+  */
+__weak void HAL_RCC_CSSCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+    the HAL_RCC_CSSCallback could be implemented in the user file
+    */ 
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c
new file mode 100644
index 0000000..7771bce
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c
@@ -0,0 +1,964 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_rcc_ex.c
+  * @author  MCD Application Team
+  * @brief   Extended RCC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities RCC extension peripheral:
+  *           + Extended Peripheral Control functions
+  *           + Extended Clock Recovery System Control functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/** @defgroup RCCEx RCCEx
+  * @brief RCC Extension HAL module driver.
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#if defined(CRS)
+/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
+  * @{
+  */
+/* Bit position in register */
+#define CRS_CFGR_FELIM_BITNUMBER    16
+#define CRS_CR_TRIM_BITNUMBER       8
+#define CRS_ISR_FECAP_BITNUMBER     16
+/**
+  * @}
+  */
+#endif /* CRS */
+  
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+  * @{
+  */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions 
+  * @brief    Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+                ##### Extended Peripheral Control functions  #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks 
+    frequencies.
+    [..] 
+    (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+        select the RTC clock source; in this case the Backup domain will be reset in  
+        order to modify the RTC Clock source, as consequence RTC registers (including 
+        the backup registers) are set to their reset values.
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified
+  *         parameters in the RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals clocks
+  *         (USART, RTC, I2C, CEC and USB).
+  *
+  * @note   Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select 
+  *         the RTC clock source; in this case the Backup domain will be reset in  
+  *         order to modify the RTC Clock source, as consequence RTC registers (including 
+  *         the backup registers) and RCC_BDCR register are set to their reset values.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0U;
+  uint32_t temp_reg = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+  
+  /*---------------------------- RTC configuration -------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* check for RTC Parameters used to output RTCCLK */
+    assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+    
+    FlagStatus       pwrclkchanged = RESET;
+
+    /* As soon as function is called to change RTC clock source, activation of the 
+       power domain is done. */
+    /* Requires to enable write access to Backup Domain of necessary */
+    if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+    {
+    __HAL_RCC_PWR_CLK_ENABLE();
+      pwrclkchanged = SET;
+    }
+    
+    if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+    {
+      /* Enable write access to Backup domain */
+      SET_BIT(PWR->CR, PWR_CR_DBP);
+      
+      /* Wait for Backup domain Write protection disable */
+      tickstart = HAL_GetTick();
+      
+      while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+      {
+        if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ 
+    temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL);
+    if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = temp_reg;
+      
+      /* Wait for LSERDY if LSE was enabled */
+      if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON))
+      {
+        /* Get Start Tick */
+        tickstart = HAL_GetTick();
+        
+        /* Wait till LSE is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+
+    /* Require to disable power clock if necessary */
+    if(pwrclkchanged == SET)
+    {
+      __HAL_RCC_PWR_CLK_DISABLE();
+    }
+  }
+
+  /*------------------------------- USART1 Configuration ------------------------*/ 
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+    
+    /* Configure the USART1 clock source */
+    __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+  }
+  
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+  /*----------------------------- USART2 Configuration --------------------------*/ 
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+    
+    /* Configure the USART2 clock source */
+    __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+  }
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+  /*----------------------------- USART3 Configuration --------------------------*/ 
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+    
+    /* Configure the USART3 clock source */
+    __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+  }
+#endif /* STM32F091xC || STM32F098xx */  
+
+  /*------------------------------ I2C1 Configuration ------------------------*/ 
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+    
+    /* Configure the I2C1 clock source */
+    __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+  }
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6)
+  /*------------------------------ USB Configuration ------------------------*/ 
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection));
+    
+    /* Configure the USB clock source */
+    __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection);
+  }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+  /*------------------------------ CEC clock Configuration -------------------*/ 
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+    
+    /* Configure the CEC clock source */
+    __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+  }
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get the RCC_ClkInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         returns the configuration information for the Extended Peripherals clocks
+  *         (USART, RTC, I2C, CEC and USB).
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  /* Set all possible values for the extended clock type parameter------------*/
+  /* Common part first */
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1   | RCC_PERIPHCLK_RTC;  
+  /* Get the RTC configuration --------------------------------------------*/
+  PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE();
+  /* Get the USART1 clock configuration --------------------------------------------*/
+  PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+  /* Get the I2C1 clock source -----------------------------------------------*/
+  PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+  PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART2;
+  /* Get the USART2 clock source ---------------------------------------------*/
+  PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+  PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART3;
+  /* Get the USART3 clock source ---------------------------------------------*/
+  PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6)
+  PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB;
+  /* Get the USB clock source ---------------------------------------------*/
+  PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE();
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+  PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC;
+  /* Get the CEC clock source ------------------------------------------------*/
+  PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+#endif /* STM32F042x6 || STM32F048xx ||                */
+       /* STM32F051x8 || STM32F058xx ||                */
+       /* STM32F071xB || STM32F072xB || STM32F078xx || */
+       /* STM32F091xC || STM32F098xx */
+
+}
+
+/**
+  * @brief  Returns the peripheral clock frequency
+  * @note   Returns 0 if peripheral clock is unknown
+  * @param  PeriphClk Peripheral clock identifier
+  *         This parameter can be one of the following values:
+  *            @arg @ref RCC_PERIPHCLK_RTC     RTC peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_USART1  USART1 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_I2C1    I2C1 peripheral clock
+  @if STM32F042x6
+  *            @arg @ref RCC_PERIPHCLK_USB     USB peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F048xx
+  *            @arg @ref RCC_PERIPHCLK_USB     USB peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F051x8
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F058xx
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F070x6
+  *            @arg @ref RCC_PERIPHCLK_USB     USB peripheral clock
+  @endif
+  @if STM32F070xB
+  *            @arg @ref RCC_PERIPHCLK_USB     USB peripheral clock
+  @endif
+  @if STM32F071xB
+  *            @arg @ref RCC_PERIPHCLK_USART2  USART2 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F072xB
+  *            @arg @ref RCC_PERIPHCLK_USART2  USART2 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_USB     USB peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F078xx
+  *            @arg @ref RCC_PERIPHCLK_USART2  USART2 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_USB     USB peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F091xC
+  *            @arg @ref RCC_PERIPHCLK_USART2  USART2 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_USART3  USART2 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  @if STM32F098xx
+  *            @arg @ref RCC_PERIPHCLK_USART2  USART2 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_USART3  USART2 peripheral clock
+  *            @arg @ref RCC_PERIPHCLK_CEC     CEC peripheral clock
+  @endif
+  * @retval Frequency in Hz (0: means that no available frequency for the peripheral)
+  */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+  /* frequency == 0 : means that no available frequency for the peripheral */
+  uint32_t frequency = 0U;
+  
+  uint32_t srcclk = 0U;
+#if defined(USB)
+  uint32_t pllmull = 0U, pllsource = 0U, predivfactor = 0U;
+#endif /* USB */
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClk));
+  
+  switch (PeriphClk)
+  {
+  case RCC_PERIPHCLK_RTC:
+    {
+      /* Get the current RTC source */
+      srcclk = __HAL_RCC_GET_RTC_SOURCE();
+
+      /* Check if LSE is ready and if RTC clock selection is LSE */
+      if ((srcclk == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+      {
+        frequency = LSE_VALUE;
+      }
+      /* Check if LSI is ready and if RTC clock selection is LSI */
+      else if ((srcclk == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)))
+      {
+        frequency = LSI_VALUE;
+      }
+      /* Check if HSE is ready  and if RTC clock selection is HSI_DIV32*/
+      else if ((srcclk == RCC_RTCCLKSOURCE_HSE_DIV32) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)))
+      {
+        frequency = HSE_VALUE / 32U;
+      }
+      break;
+    }
+  case RCC_PERIPHCLK_USART1:
+    {
+      /* Get the current USART1 source */
+      srcclk = __HAL_RCC_GET_USART1_SOURCE();
+
+      /* Check if USART1 clock selection is PCLK1 */
+      if (srcclk == RCC_USART1CLKSOURCE_PCLK1)
+      {
+        frequency = HAL_RCC_GetPCLK1Freq();
+      }
+      /* Check if HSI is ready and if USART1 clock selection is HSI */
+      else if ((srcclk == RCC_USART1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+      {
+        frequency = HSI_VALUE;
+      }
+      /* Check if USART1 clock selection is SYSCLK */
+      else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK)
+      {
+        frequency = HAL_RCC_GetSysClockFreq();
+      }
+      /* Check if LSE is ready  and if USART1 clock selection is LSE */
+      else if ((srcclk == RCC_USART1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+      {
+        frequency = LSE_VALUE;
+      }
+      break;
+    }
+#if defined(RCC_CFGR3_USART2SW)
+  case RCC_PERIPHCLK_USART2:
+    {
+      /* Get the current USART2 source */
+      srcclk = __HAL_RCC_GET_USART2_SOURCE();
+
+      /* Check if USART2 clock selection is PCLK1 */
+      if (srcclk == RCC_USART2CLKSOURCE_PCLK1)
+      {
+        frequency = HAL_RCC_GetPCLK1Freq();
+      }
+      /* Check if HSI is ready and if USART2 clock selection is HSI */
+      else if ((srcclk == RCC_USART2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+      {
+        frequency = HSI_VALUE;
+      }
+      /* Check if USART2 clock selection is SYSCLK */
+      else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK)
+      {
+        frequency = HAL_RCC_GetSysClockFreq();
+      }
+      /* Check if LSE is ready  and if USART2 clock selection is LSE */
+      else if ((srcclk == RCC_USART2CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+      {
+        frequency = LSE_VALUE;
+      }
+      break;
+    }
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+  case RCC_PERIPHCLK_USART3:
+    {
+      /* Get the current USART3 source */
+      srcclk = __HAL_RCC_GET_USART3_SOURCE();
+
+      /* Check if USART3 clock selection is PCLK1 */
+      if (srcclk == RCC_USART3CLKSOURCE_PCLK1)
+      {
+        frequency = HAL_RCC_GetPCLK1Freq();
+      }
+      /* Check if HSI is ready and if USART3 clock selection is HSI */
+      else if ((srcclk == RCC_USART3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+      {
+        frequency = HSI_VALUE;
+      }
+      /* Check if USART3 clock selection is SYSCLK */
+      else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK)
+      {
+        frequency = HAL_RCC_GetSysClockFreq();
+      }
+      /* Check if LSE is ready  and if USART3 clock selection is LSE */
+      else if ((srcclk == RCC_USART3CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+      {
+        frequency = LSE_VALUE;
+      }
+      break;
+    }
+#endif /* RCC_CFGR3_USART3SW */
+  case RCC_PERIPHCLK_I2C1:
+    {
+      /* Get the current I2C1 source */
+      srcclk = __HAL_RCC_GET_I2C1_SOURCE();
+
+      /* Check if HSI is ready and if I2C1 clock selection is HSI */
+      if ((srcclk == RCC_I2C1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+      {
+        frequency = HSI_VALUE;
+      }
+      /* Check if I2C1 clock selection is SYSCLK */
+      else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK)
+      {
+        frequency = HAL_RCC_GetSysClockFreq();
+      }
+      break;
+    }
+#if defined(USB)
+  case RCC_PERIPHCLK_USB:
+    {
+      /* Get the current USB source */
+      srcclk = __HAL_RCC_GET_USB_SOURCE();
+
+      /* Check if PLL is ready and if USB clock selection is PLL */
+      if ((srcclk == RCC_USBCLKSOURCE_PLL) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+      {
+        /* Get PLL clock source and multiplication factor ----------------------*/
+        pllmull      = RCC->CFGR & RCC_CFGR_PLLMUL;
+        pllsource    = RCC->CFGR & RCC_CFGR_PLLSRC;
+        pllmull      = (pllmull >> RCC_CFGR_PLLMUL_BITNUMBER) + 2U;
+        predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1U;
+
+        if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+        {
+          /* HSE used as PLL clock source : frequency = HSE/PREDIV * PLLMUL */
+          frequency = (HSE_VALUE/predivfactor) * pllmull;
+        }
+#if defined(RCC_CR2_HSI48ON)
+        else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
+        {
+          /* HSI48 used as PLL clock source : frequency = HSI48/PREDIV * PLLMUL */
+          frequency = (HSI48_VALUE / predivfactor) * pllmull;
+        }
+#endif /* RCC_CR2_HSI48ON */
+        else
+        {
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F072xB) || defined(STM32F070xB)
+          /* HSI used as PLL clock source : frequency = HSI/PREDIV * PLLMUL */
+          frequency = (HSI_VALUE / predivfactor) * pllmull;
+#else
+          /* HSI used as PLL clock source : frequency = HSI/2U * PLLMUL */
+          frequency = (HSI_VALUE >> 1U) * pllmull;
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB */
+        }
+      }
+#if defined(RCC_CR2_HSI48ON)
+      /* Check if HSI48 is ready and if USB clock selection is HSI48 */
+      else if ((srcclk == RCC_USBCLKSOURCE_HSI48) && (HAL_IS_BIT_SET(RCC->CR2, RCC_CR2_HSI48RDY)))
+      {
+        frequency = HSI48_VALUE;
+      }
+#endif /* RCC_CR2_HSI48ON */
+      break;
+    }
+#endif /* USB */
+#if defined(CEC)
+  case RCC_PERIPHCLK_CEC:
+    {
+      /* Get the current CEC source */
+      srcclk = __HAL_RCC_GET_CEC_SOURCE();
+
+      /* Check if HSI is ready and if CEC clock selection is HSI */
+      if ((srcclk == RCC_CECCLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+      {
+        frequency = HSI_VALUE;
+      }
+      /* Check if LSE is ready  and if CEC clock selection is LSE */
+      else if ((srcclk == RCC_CECCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+      {
+        frequency = LSE_VALUE;
+      }
+      break;
+    }
+#endif /* CEC */
+  default: 
+    {
+      break;
+    }
+  }
+  return(frequency);
+}
+
+/**
+  * @}
+  */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions 
+ *  @brief  Extended Clock Recovery System Control functions
+ *
+@verbatim
+ ===============================================================================
+                ##### Extended Clock Recovery System Control functions  #####
+ ===============================================================================
+    [..]
+      For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows:
+
+      (#) In System clock config, HSI48 needs to be enabled
+
+      (#) Enable CRS clock in IP MSP init which will use CRS functions
+
+      (#) Call CRS functions as follows:
+          (##) Prepare synchronization configuration necessary for HSI48 calibration
+              (+++) Default values can be set for frequency Error Measurement (reload and error limit)
+                        and also HSI48 oscillator smooth trimming.
+              (+++) Macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate 
+                        directly reload value with target and synchronization frequencies values
+          (##) Call function @ref HAL_RCCEx_CRSConfig which
+              (+++) Reset CRS registers to their default values.
+              (+++) Configure CRS registers with synchronization configuration 
+              (+++) Enable automatic calibration and frequency error counter feature
+           Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the
+           periodic USB SOF will not be generated by the host. No SYNC signal will therefore be
+           provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock
+           precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs
+           should be used as SYNC signal.
+
+          (##) A polling function is provided to wait for complete synchronization
+              (+++) Call function @ref HAL_RCCEx_CRSWaitSynchronization()
+              (+++) According to CRS status, user can decide to adjust again the calibration or continue
+                        application if synchronization is OK
+              
+      (#) User can retrieve information related to synchronization in calling function
+            @ref HAL_RCCEx_CRSGetSynchronizationInfo()
+
+      (#) Regarding synchronization status and synchronization information, user can try a new calibration
+           in changing synchronization configuration and call again HAL_RCCEx_CRSConfig.
+           Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), 
+           it means that the actual frequency is lower than the target (and so, that the TRIM value should be 
+           incremented), while when it is detected during the upcounting phase it means that the actual frequency 
+           is higher (and that the TRIM value should be decremented).
+
+      (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go 
+          through CRS Handler (RCC_IRQn/RCC_IRQHandler)
+              (++) Call function @ref HAL_RCCEx_CRSConfig()
+              (++) Enable RCC_IRQn (thanks to NVIC functions)
+              (++) Enable CRS interrupt (@ref __HAL_RCC_CRS_ENABLE_IT)
+              (++) Implement CRS status management in the following user callbacks called from 
+                   HAL_RCCEx_CRS_IRQHandler():
+                   (+++) @ref HAL_RCCEx_CRS_SyncOkCallback()
+                   (+++) @ref HAL_RCCEx_CRS_SyncWarnCallback()
+                   (+++) @ref HAL_RCCEx_CRS_ExpectedSyncCallback()
+                   (+++) @ref HAL_RCCEx_CRS_ErrorCallback()
+
+      (#) To force a SYNC EVENT, user can use the function @ref HAL_RCCEx_CRSSoftwareSynchronizationGenerate().
+          This function can be called before calling @ref HAL_RCCEx_CRSConfig (for instance in Systick handler)
+            
+@endverbatim
+ * @{
+ */
+
+/**
+  * @brief  Start automatic synchronization for polling mode
+  * @param  pInit Pointer on RCC_CRSInitTypeDef structure
+  * @retval None
+  */
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit)
+{
+  uint32_t value = 0U;
+  
+  /* Check the parameters */
+  assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler));
+  assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source));
+  assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity));
+  assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue));
+  assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue));
+  assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue));
+
+  /* CONFIGURATION */
+
+  /* Before configuration, reset CRS registers to their default values*/
+  __HAL_RCC_CRS_FORCE_RESET();
+  __HAL_RCC_CRS_RELEASE_RESET();
+
+  /* Set the SYNCDIV[2:0] bits according to Prescaler value */
+  /* Set the SYNCSRC[1:0] bits according to Source value */
+  /* Set the SYNCSPOL bit according to Polarity value */
+  value = (pInit->Prescaler | pInit->Source | pInit->Polarity);
+  /* Set the RELOAD[15:0] bits according to ReloadValue value */
+  value |= pInit->ReloadValue;
+  /* Set the FELIM[7:0] bits according to ErrorLimitValue value */
+  value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_BITNUMBER);
+  WRITE_REG(CRS->CFGR, value);
+
+  /* Adjust HSI48 oscillator smooth trimming */
+  /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */
+  MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_BITNUMBER));
+  
+  /* START AUTOMATIC SYNCHRONIZATION*/
+  
+  /* Enable Automatic trimming & Frequency error counter */
+  SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN);
+}
+
+/**
+  * @brief  Generate the software synchronization event
+  * @retval None
+  */
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void)
+{
+  SET_BIT(CRS->CR, CRS_CR_SWSYNC);
+}
+
+/**
+  * @brief  Return synchronization info 
+  * @param  pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure
+  * @retval None
+  */
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo)
+{
+  /* Check the parameter */
+  assert_param(pSynchroInfo != NULL);
+  
+  /* Get the reload value */
+  pSynchroInfo->ReloadValue = (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD));
+  
+  /* Get HSI48 oscillator smooth trimming */
+  pSynchroInfo->HSI48CalibrationValue = (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_BITNUMBER);
+
+  /* Get Frequency error capture */
+  pSynchroInfo->FreqErrorCapture = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_BITNUMBER);
+
+  /* Get Frequency error direction */
+  pSynchroInfo->FreqErrorDirection = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR));
+}
+
+/**
+* @brief Wait for CRS Synchronization status.
+* @param Timeout  Duration of the timeout
+* @note  Timeout is based on the maximum time to receive a SYNC event based on synchronization
+*        frequency.
+* @note    If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned.
+* @retval Combination of Synchronization status
+*          This parameter can be a combination of the following values:
+*            @arg @ref RCC_CRS_TIMEOUT
+*            @arg @ref RCC_CRS_SYNCOK
+*            @arg @ref RCC_CRS_SYNCWARN
+*            @arg @ref RCC_CRS_SYNCERR
+*            @arg @ref RCC_CRS_SYNCMISS
+*            @arg @ref RCC_CRS_TRIMOVF
+*/
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout)
+{
+  uint32_t crsstatus = RCC_CRS_NONE;
+  uint32_t tickstart = 0U;
+  
+  /* Get timeout */
+  tickstart = HAL_GetTick();
+  
+  /* Wait for CRS flag or timeout detection */
+  do
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        crsstatus = RCC_CRS_TIMEOUT;
+      }
+    }
+    /* Check CRS SYNCOK flag  */
+    if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK))
+    {
+      /* CRS SYNC event OK */
+      crsstatus |= RCC_CRS_SYNCOK;
+    
+      /* Clear CRS SYNC event OK bit */
+      __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK);
+    }
+    
+    /* Check CRS SYNCWARN flag  */
+    if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN))
+    {
+      /* CRS SYNC warning */
+      crsstatus |= RCC_CRS_SYNCWARN;
+    
+      /* Clear CRS SYNCWARN bit */
+      __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN);
+    }
+    
+    /* Check CRS TRIM overflow flag  */
+    if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF))
+    {
+      /* CRS SYNC Error */
+      crsstatus |= RCC_CRS_TRIMOVF;
+    
+      /* Clear CRS Error bit */
+      __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF);
+    }
+    
+    /* Check CRS Error flag  */
+    if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR))
+    {
+      /* CRS SYNC Error */
+      crsstatus |= RCC_CRS_SYNCERR;
+    
+      /* Clear CRS Error bit */
+      __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR);
+    }
+    
+    /* Check CRS SYNC Missed flag  */
+    if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS))
+    {
+      /* CRS SYNC Missed */
+      crsstatus |= RCC_CRS_SYNCMISS;
+    
+      /* Clear CRS SYNC Missed bit */
+      __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS);
+    }
+    
+    /* Check CRS Expected SYNC flag  */
+    if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC))
+    {
+      /* frequency error counter reached a zero value */
+      __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC);
+    }
+  } while(RCC_CRS_NONE == crsstatus);
+
+  return crsstatus;
+}
+
+/**
+  * @brief Handle the Clock Recovery System interrupt request.
+  * @retval None
+  */
+void HAL_RCCEx_CRS_IRQHandler(void)
+{
+  uint32_t crserror = RCC_CRS_NONE;
+  /* Get current IT flags and IT sources values */
+  uint32_t itflags = READ_REG(CRS->ISR);
+  uint32_t itsources = READ_REG(CRS->CR);
+
+  /* Check CRS SYNCOK flag  */
+  if(((itflags & RCC_CRS_FLAG_SYNCOK) != RESET) && ((itsources & RCC_CRS_IT_SYNCOK) != RESET))
+  {
+    /* Clear CRS SYNC event OK flag */
+    WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC);
+
+    /* user callback */
+    HAL_RCCEx_CRS_SyncOkCallback();
+  }
+  /* Check CRS SYNCWARN flag  */
+  else if(((itflags & RCC_CRS_FLAG_SYNCWARN) != RESET) && ((itsources & RCC_CRS_IT_SYNCWARN) != RESET))
+  {
+    /* Clear CRS SYNCWARN flag */
+    WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC);
+
+    /* user callback */
+    HAL_RCCEx_CRS_SyncWarnCallback();
+  }
+  /* Check CRS Expected SYNC flag  */
+  else if(((itflags & RCC_CRS_FLAG_ESYNC) != RESET) && ((itsources & RCC_CRS_IT_ESYNC) != RESET))
+  {
+    /* frequency error counter reached a zero value */
+    WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC);
+
+    /* user callback */
+    HAL_RCCEx_CRS_ExpectedSyncCallback();
+  }
+  /* Check CRS Error flags  */
+  else
+  {
+    if(((itflags & RCC_CRS_FLAG_ERR) != RESET) && ((itsources & RCC_CRS_IT_ERR) != RESET))
+    {
+      if((itflags & RCC_CRS_FLAG_SYNCERR) != RESET)
+      {
+        crserror |= RCC_CRS_SYNCERR;
+      }
+      if((itflags & RCC_CRS_FLAG_SYNCMISS) != RESET)
+      {
+        crserror |= RCC_CRS_SYNCMISS;
+      }
+      if((itflags & RCC_CRS_FLAG_TRIMOVF) != RESET)
+      {
+        crserror |= RCC_CRS_TRIMOVF;
+      }
+
+      /* Clear CRS Error flags */
+      WRITE_REG(CRS->ICR, CRS_ICR_ERRC);
+    
+      /* user error callback */
+      HAL_RCCEx_CRS_ErrorCallback(crserror);
+    }
+  }
+}
+
+/**
+  * @brief  RCCEx Clock Recovery System SYNCOK interrupt callback.
+  * @retval none
+  */
+__weak void HAL_RCCEx_CRS_SyncOkCallback(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  RCCEx Clock Recovery System SYNCWARN interrupt callback.
+  * @retval none
+  */
+__weak void HAL_RCCEx_CRS_SyncWarnCallback(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  RCCEx Clock Recovery System Expected SYNC interrupt callback.
+  * @retval none
+  */
+__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  RCCEx Clock Recovery System Error interrupt callback.
+  * @param  Error Combination of Error status. 
+  *         This parameter can be a combination of the following values:
+  *           @arg @ref RCC_CRS_SYNCERR
+  *           @arg @ref RCC_CRS_SYNCMISS
+  *           @arg @ref RCC_CRS_TRIMOVF
+  * @retval none
+  */
+__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(Error);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+#endif /* CRS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c
new file mode 100644
index 0000000..4ecd84b
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c
@@ -0,0 +1,7433 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_tim.c
+  * @author  MCD Application Team
+  * @brief   TIM HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Timer (TIM) peripheral:
+  *           + TIM Time Base Initialization
+  *           + TIM Time Base Start
+  *           + TIM Time Base Start Interruption
+  *           + TIM Time Base Start DMA
+  *           + TIM Output Compare/PWM Initialization
+  *           + TIM Output Compare/PWM Channel Configuration
+  *           + TIM Output Compare/PWM  Start
+  *           + TIM Output Compare/PWM  Start Interruption
+  *           + TIM Output Compare/PWM Start DMA
+  *           + TIM Input Capture Initialization
+  *           + TIM Input Capture Channel Configuration
+  *           + TIM Input Capture Start
+  *           + TIM Input Capture Start Interruption
+  *           + TIM Input Capture Start DMA
+  *           + TIM One Pulse Initialization
+  *           + TIM One Pulse Channel Configuration
+  *           + TIM One Pulse Start
+  *           + TIM Encoder Interface Initialization
+  *           + TIM Encoder Interface Start
+  *           + TIM Encoder Interface Start Interruption
+  *           + TIM Encoder Interface Start DMA
+  *           + Commutation Event configuration with Interruption and DMA
+  *           + TIM OCRef clear configuration
+  *           + TIM External Clock configuration
+  @verbatim
+  ==============================================================================
+                      ##### TIMER Generic features #####
+  ==============================================================================
+  [..] The Timer features include:
+       (#) 16-bit up, down, up/down auto-reload counter.
+       (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+           counter clock frequency either by any factor between 1 and 65536.
+       (#) Up to 4 independent channels for:
+           (++) Input Capture
+           (++) Output Compare
+           (++) PWM generation (Edge and Center-aligned Mode)
+           (++) One-pulse mode output
+       (#) Synchronization circuit to control the timer with external signals and to interconnect
+            several timers together.
+       (#) Supports incremental encoder for positioning purposes
+
+            ##### How to use this driver #####
+  ==============================================================================
+    [..]
+     (#) Initialize the TIM low level resources by implementing the following functions
+         depending on the selected feature:
+           (++) Time Base : HAL_TIM_Base_MspInit()
+           (++) Input Capture : HAL_TIM_IC_MspInit()
+           (++) Output Compare : HAL_TIM_OC_MspInit()
+           (++) PWM generation : HAL_TIM_PWM_MspInit()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+           (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+     (#) Initialize the TIM low level resources :
+        (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+        (##) TIM pins configuration
+            (+++) Enable the clock for the TIM GPIOs using the following function:
+             __HAL_RCC_GPIOx_CLK_ENABLE();
+            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+     (#) The external Clock can be configured, if needed (the default clock is the
+         internal clock from the APBx), using the following function:
+         HAL_TIM_ConfigClockSource, the clock configuration should be done before
+         any start function.
+
+     (#) Configure the TIM in the desired functioning mode using one of the
+       Initialization function of this driver:
+       (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+       (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+            Output Compare signal.
+       (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+            PWM signal.
+       (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+            external signal.
+       (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+            in One Pulse Mode.
+       (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+     (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+           (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+           (++) Input Capture :  HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+           (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+           (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+           (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+     (#) The DMA Burst is managed with the two following functions:
+         HAL_TIM_DMABurst_WriteStart()
+         HAL_TIM_DMABurst_ReadStart()
+
+    *** Callback registration ***
+  =============================================
+
+  [..]
+  The compilation define  USE_HAL_TIM_REGISTER_CALLBACKS when set to 1
+  allows the user to configure dynamically the driver callbacks.
+
+  [..]
+  Use Function @ref HAL_TIM_RegisterCallback() to register a callback.
+  @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle,
+  the Callback ID and a pointer to the user callback function.
+
+  [..]
+  Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default
+  weak function.
+  @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
+  and the Callback ID.
+
+  [..]
+  These functions allow to register/unregister following callbacks:
+    (+) Base_MspInitCallback              : TIM Base Msp Init Callback.
+    (+) Base_MspDeInitCallback            : TIM Base Msp DeInit Callback.
+    (+) IC_MspInitCallback                : TIM IC Msp Init Callback.
+    (+) IC_MspDeInitCallback              : TIM IC Msp DeInit Callback.
+    (+) OC_MspInitCallback                : TIM OC Msp Init Callback.
+    (+) OC_MspDeInitCallback              : TIM OC Msp DeInit Callback.
+    (+) PWM_MspInitCallback               : TIM PWM Msp Init Callback.
+    (+) PWM_MspDeInitCallback             : TIM PWM Msp DeInit Callback.
+    (+) OnePulse_MspInitCallback          : TIM One Pulse Msp Init Callback.
+    (+) OnePulse_MspDeInitCallback        : TIM One Pulse Msp DeInit Callback.
+    (+) Encoder_MspInitCallback           : TIM Encoder Msp Init Callback.
+    (+) Encoder_MspDeInitCallback         : TIM Encoder Msp DeInit Callback.
+    (+) HallSensor_MspInitCallback        : TIM Hall Sensor Msp Init Callback.
+    (+) HallSensor_MspDeInitCallback      : TIM Hall Sensor Msp DeInit Callback.
+    (+) PeriodElapsedCallback             : TIM Period Elapsed Callback.
+    (+) PeriodElapsedHalfCpltCallback     : TIM Period Elapsed half complete Callback.
+    (+) TriggerCallback                   : TIM Trigger Callback.
+    (+) TriggerHalfCpltCallback           : TIM Trigger half complete Callback.
+    (+) IC_CaptureCallback                : TIM Input Capture Callback.
+    (+) IC_CaptureHalfCpltCallback        : TIM Input Capture half complete Callback.
+    (+) OC_DelayElapsedCallback           : TIM Output Compare Delay Elapsed Callback.
+    (+) PWM_PulseFinishedCallback         : TIM PWM Pulse Finished Callback.
+    (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback.
+    (+) ErrorCallback                     : TIM Error Callback.
+    (+) CommutationCallback               : TIM Commutation Callback.
+    (+) CommutationHalfCpltCallback       : TIM Commutation half complete Callback.
+    (+) BreakCallback                     : TIM Break Callback.
+
+  [..]
+By default, after the Init and when the state is HAL_TIM_STATE_RESET
+all interrupt callbacks are set to the corresponding weak functions:
+  examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback().
+
+  [..]
+  Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
+  functionalities in the Init / DeInit only when these callbacks are null
+  (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit
+    keep and use the user MspInit / MspDeInit callbacks(registered beforehand)
+
+  [..]
+    Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only.
+    Exception done MspInit / MspDeInit that can be registered / unregistered
+    in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state,
+    thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit.
+  In that case first register the MspInit/MspDeInit user callbacks
+      using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function.
+
+  [..]
+      When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or
+      not defined, the callback registration feature is not available and all callbacks
+      are set to the corresponding weak functions.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup TIM TIM
+  * @brief TIM HAL module driver
+  * @{
+  */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+  * @{
+  */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                              uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                              uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                              uint32_t TIM_ICFilter);
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                                                  TIM_SlaveConfigTypeDef *sSlaveConfig);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+  * @{
+  */
+
+/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions
+  *  @brief    Time Base functions
+  *
+@verbatim
+  ==============================================================================
+              ##### Time Base functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM base.
+    (+) De-initialize the TIM base.
+    (+) Start the Time Base.
+    (+) Stop the Time Base.
+    (+) Start the Time Base and enable interrupt.
+    (+) Stop the Time Base and disable interrupt.
+    (+) Start the Time Base and enable DMA transfer.
+    (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Time base Unit according to the specified
+  *         parameters in the TIM_HandleTypeDef and initialize the associated handle.
+  * @note   Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+  *         requires a timer reset to avoid unexpected direction
+  *         due to DIR bit readonly in center aligned mode.
+  *         Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init()
+  * @param  htim TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if (htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+  if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+    /* Reset interrupt callbacks to legacy weak callbacks */
+    TIM_ResetCallback(htim);
+
+    if (htim->Base_MspInitCallback == NULL)
+    {
+      htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
+    }
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    htim->Base_MspInitCallback(htim);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    HAL_TIM_Base_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Set the Time Base configuration */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Initialize the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Initialize the TIM state*/
+  htim->State = HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Base peripheral
+  * @param  htim TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  if (htim->Base_MspDeInitCallback == NULL)
+  {
+    htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
+  }
+  /* DeInit the low level hardware */
+  htim->Base_MspDeInitCallback(htim);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Base_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+  /* Change the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Base MSP.
+  * @param  htim TIM Base handle
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Base MSP.
+  * @param  htim TIM Base handle
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspDeInit could be implemented in the user file
+   */
+}
+
+
+/**
+  * @brief  Starts the TIM Base generation.
+  * @param  htim TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Check the TIM state */
+  if (htim->State != HAL_TIM_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation.
+  * @param  htim TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in interrupt mode.
+  * @param  htim TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Check the TIM state */
+  if (htim->State != HAL_TIM_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Enable the TIM Update interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in interrupt mode.
+  * @param  htim TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Disable the TIM Update interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in DMA mode.
+  * @param  htim TIM Base handle
+  * @param  pData The source Buffer address.
+  * @param  Length The length of data to be transferred from memory to peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+  /* Set the TIM state */
+  if (htim->State == HAL_TIM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if (htim->State == HAL_TIM_STATE_READY)
+  {
+    if ((pData == NULL) && (Length > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the DMA Period elapsed callbacks */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
+
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+  /* Enable the DMA channel */
+  if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK)
+  {
+    /* Return error status */
+    return HAL_ERROR;
+  }
+
+  /* Enable the TIM Update DMA request */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in DMA mode.
+  * @param  htim TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+  (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions
+  *  @brief    TIM Output Compare functions
+  *
+@verbatim
+  ==============================================================================
+                  ##### TIM Output Compare functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Output Compare.
+    (+) De-initialize the TIM Output Compare.
+    (+) Start the TIM Output Compare.
+    (+) Stop the TIM Output Compare.
+    (+) Start the TIM Output Compare and enable interrupt.
+    (+) Stop the TIM Output Compare and disable interrupt.
+    (+) Start the TIM Output Compare and enable DMA transfer.
+    (+) Stop the TIM Output Compare and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Output Compare according to the specified
+  *         parameters in the TIM_HandleTypeDef and initializes the associated handle.
+  * @note   Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+  *         requires a timer reset to avoid unexpected direction
+  *         due to DIR bit readonly in center aligned mode.
+  *         Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init()
+  * @param  htim TIM Output Compare handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if (htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+  if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+    /* Reset interrupt callbacks to legacy weak callbacks */
+    TIM_ResetCallback(htim);
+
+    if (htim->OC_MspInitCallback == NULL)
+    {
+      htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
+    }
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    htim->OC_MspInitCallback(htim);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the Output Compare */
+  TIM_Base_SetConfig(htim->Instance,  &htim->Init);
+
+  /* Initialize the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Initialize the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Initialize the TIM state*/
+  htim->State = HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral
+  * @param  htim TIM Output Compare handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  if (htim->OC_MspDeInitCallback == NULL)
+  {
+    htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
+  }
+  /* DeInit the low level hardware */
+  htim->OC_MspDeInitCallback(htim);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_OC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+  /* Change the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Output Compare MSP.
+  * @param  htim TIM Output Compare handle
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Output Compare MSP.
+  * @param  htim TIM Output Compare handle
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM channel state */
+  if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM channel state */
+  if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in DMA mode.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData The source Buffer address.
+  * @param  Length The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Set the TIM channel state */
+  if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+  {
+    if ((pData == NULL) && (Length > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in DMA mode.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions
+  *  @brief    TIM PWM functions
+  *
+@verbatim
+  ==============================================================================
+                          ##### TIM PWM functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM PWM.
+    (+) De-initialize the TIM PWM.
+    (+) Start the TIM PWM.
+    (+) Stop the TIM PWM.
+    (+) Start the TIM PWM and enable interrupt.
+    (+) Stop the TIM PWM and disable interrupt.
+    (+) Start the TIM PWM and enable DMA transfer.
+    (+) Stop the TIM PWM and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM PWM Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and initializes the associated handle.
+  * @note   Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+  *         requires a timer reset to avoid unexpected direction
+  *         due to DIR bit readonly in center aligned mode.
+  *         Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init()
+  * @param  htim TIM PWM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if (htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+  if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+    /* Reset interrupt callbacks to legacy weak callbacks */
+    TIM_ResetCallback(htim);
+
+    if (htim->PWM_MspInitCallback == NULL)
+    {
+      htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
+    }
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    htim->PWM_MspInitCallback(htim);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_PWM_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the PWM */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Initialize the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Initialize the TIM state*/
+  htim->State = HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral
+  * @param  htim TIM PWM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  if (htim->PWM_MspDeInitCallback == NULL)
+  {
+    htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
+  }
+  /* DeInit the low level hardware */
+  htim->PWM_MspDeInitCallback(htim);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_PWM_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+  /* Change the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM MSP.
+  * @param  htim TIM PWM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM PWM MSP.
+  * @param  htim TIM PWM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the PWM signal generation.
+  * @param  htim TIM handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM channel state */
+  if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation.
+  * @param  htim TIM PWM handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the PWM signal generation in interrupt mode.
+  * @param  htim TIM PWM handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM channel state */
+  if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation in interrupt mode.
+  * @param  htim TIM PWM handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM PWM signal generation in DMA mode.
+  * @param  htim TIM PWM handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData The source Buffer address.
+  * @param  Length The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Set the TIM channel state */
+  if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+  {
+    if ((pData == NULL) && (Length > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Output Capture/Compare 3 request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM PWM signal generation in DMA mode.
+  * @param  htim TIM PWM handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions
+  *  @brief    TIM Input Capture functions
+  *
+@verbatim
+  ==============================================================================
+              ##### TIM Input Capture functions #####
+  ==============================================================================
+ [..]
+   This section provides functions allowing to:
+   (+) Initialize and configure the TIM Input Capture.
+   (+) De-initialize the TIM Input Capture.
+   (+) Start the TIM Input Capture.
+   (+) Stop the TIM Input Capture.
+   (+) Start the TIM Input Capture and enable interrupt.
+   (+) Stop the TIM Input Capture and disable interrupt.
+   (+) Start the TIM Input Capture and enable DMA transfer.
+   (+) Stop the TIM Input Capture and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Input Capture Time base according to the specified
+  *         parameters in the TIM_HandleTypeDef and initializes the associated handle.
+  * @note   Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+  *         requires a timer reset to avoid unexpected direction
+  *         due to DIR bit readonly in center aligned mode.
+  *         Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init()
+  * @param  htim TIM Input Capture handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if (htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+  if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+    /* Reset interrupt callbacks to legacy weak callbacks */
+    TIM_ResetCallback(htim);
+
+    if (htim->IC_MspInitCallback == NULL)
+    {
+      htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
+    }
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    htim->IC_MspInitCallback(htim);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_IC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the input capture */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Initialize the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Initialize the TIM state*/
+  htim->State = HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral
+  * @param  htim TIM Input Capture handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  if (htim->IC_MspDeInitCallback == NULL)
+  {
+    htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
+  }
+  /* DeInit the low level hardware */
+  htim->IC_MspDeInitCallback(htim);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_IC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+  /* Change the TIM channels state */
+  TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Input Capture MSP.
+  * @param  htim TIM Input Capture handle
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Input Capture MSP.
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement.
+  * @param  htim TIM Input Capture handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+  HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM channel state */
+  if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement.
+  * @param  htim TIM Input Capture handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement in interrupt mode.
+  * @param  htim TIM Input Capture handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+  HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM channel state */
+  if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement in interrupt mode.
+  * @param  htim TIM Input Capture handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement in DMA mode.
+  * @param  htim TIM Input Capture handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData The destination Buffer address.
+  * @param  Length The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  uint32_t tmpsmcr;
+  HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  /* Set the TIM channel state */
+  if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY)
+      || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY))
+  {
+    return HAL_BUSY;
+  }
+  else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY)
+           && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY))
+  {
+    if ((pData == NULL) && (Length > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 2  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement in DMA mode.
+  * @param  htim TIM Input Capture handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions
+  *  @brief    TIM One Pulse functions
+  *
+@verbatim
+  ==============================================================================
+                        ##### TIM One Pulse functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM One Pulse.
+    (+) De-initialize the TIM One Pulse.
+    (+) Start the TIM One Pulse.
+    (+) Stop the TIM One Pulse.
+    (+) Start the TIM One Pulse and enable interrupt.
+    (+) Stop the TIM One Pulse and disable interrupt.
+    (+) Start the TIM One Pulse and enable DMA transfer.
+    (+) Stop the TIM One Pulse and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM One Pulse Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and initializes the associated handle.
+  * @note   Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+  *         requires a timer reset to avoid unexpected direction
+  *         due to DIR bit readonly in center aligned mode.
+  *         Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init()
+  * @note   When the timer instance is initialized in One Pulse mode, timer
+  *         channels 1 and channel 2 are reserved and cannot be used for other
+  *         purpose.
+  * @param  htim TIM One Pulse handle
+  * @param  OnePulseMode Select the One pulse mode.
+  *         This parameter can be one of the following values:
+  *            @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+  *            @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+  /* Check the TIM handle allocation */
+  if (htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+  assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+  if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+    /* Reset interrupt callbacks to legacy weak callbacks */
+    TIM_ResetCallback(htim);
+
+    if (htim->OnePulse_MspInitCallback == NULL)
+    {
+      htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
+    }
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    htim->OnePulse_MspInitCallback(htim);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OnePulse_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Configure the Time base in the One Pulse Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Reset the OPM Bit */
+  htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+  /* Configure the OPM Mode */
+  htim->Instance->CR1 |= OnePulseMode;
+
+  /* Initialize the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Initialize the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Initialize the TIM state*/
+  htim->State = HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM One Pulse
+  * @param  htim TIM One Pulse handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  if (htim->OnePulse_MspDeInitCallback == NULL)
+  {
+    htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
+  }
+  /* DeInit the low level hardware */
+  htim->OnePulse_MspDeInitCallback(htim);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_OnePulse_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse MSP.
+  * @param  htim TIM One Pulse handle
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM One Pulse MSP.
+  * @param  htim TIM One Pulse handle
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(OutputChannel);
+
+  /* Check the TIM channels state */
+  if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the Capture compare and the Input Capture channels
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+    No need to enable the counter, it's enabled automatically by hardware
+    (the counter starts in response to a stimulus and generate a pulse */
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channels to be disable
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(OutputChannel);
+
+  /* Disable the Capture compare and the Input Capture channels
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(OutputChannel);
+
+  /* Check the TIM channels state */
+  if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the Capture compare and the Input Capture channels
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+    No need to enable the counter, it's enabled automatically by hardware
+    (the counter starts in response to a stimulus and generate a pulse */
+
+  /* Enable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+  /* Enable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(OutputChannel);
+
+  /* Disable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+  /* Disable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+  /* Disable the Capture compare and the Input Capture channels
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+  if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions
+  *  @brief    TIM Encoder functions
+  *
+@verbatim
+  ==============================================================================
+                          ##### TIM Encoder functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Encoder.
+    (+) De-initialize the TIM Encoder.
+    (+) Start the TIM Encoder.
+    (+) Stop the TIM Encoder.
+    (+) Start the TIM Encoder and enable interrupt.
+    (+) Stop the TIM Encoder and disable interrupt.
+    (+) Start the TIM Encoder and enable DMA transfer.
+    (+) Stop the TIM Encoder and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Encoder Interface and initialize the associated handle.
+  * @note   Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+  *         requires a timer reset to avoid unexpected direction
+  *         due to DIR bit readonly in center aligned mode.
+  *         Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init()
+  * @note   Encoder mode and External clock mode 2 are not compatible and must not be selected together
+  *         Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource
+  *         using TIM_CLOCKSOURCE_ETRMODE2 and vice versa
+  * @note   When the timer instance is initialized in Encoder mode, timer
+  *         channels 1 and channel 2 are reserved and cannot be used for other
+  *         purpose.
+  * @param  htim TIM Encoder Interface handle
+  * @param  sConfig TIM Encoder Interface configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef *sConfig)
+{
+  uint32_t tmpsmcr;
+  uint32_t tmpccmr1;
+  uint32_t tmpccer;
+
+  /* Check the TIM handle allocation */
+  if (htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+  assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+  assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity));
+  assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+  if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+    /* Reset interrupt callbacks to legacy weak callbacks */
+    TIM_ResetCallback(htim);
+
+    if (htim->Encoder_MspInitCallback == NULL)
+    {
+      htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
+    }
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    htim->Encoder_MspInitCallback(htim);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_Encoder_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Reset the SMS and ECE bits */
+  htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE);
+
+  /* Configure the Time base in the Encoder Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmr1 = htim->Instance->CCMR1;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = htim->Instance->CCER;
+
+  /* Set the encoder Mode */
+  tmpsmcr |= sConfig->EncoderMode;
+
+  /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+  tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+  tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U));
+
+  /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+  tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+  tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+  tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U);
+  tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U);
+
+  /* Set the TI1 and the TI2 Polarities */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+  tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+  tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U);
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  /* Write to TIMx CCMR1 */
+  htim->Instance->CCMR1 = tmpccmr1;
+
+  /* Write to TIMx CCER */
+  htim->Instance->CCER = tmpccer;
+
+  /* Initialize the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Initialize the TIM state*/
+  htim->State = HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  DeInitializes the TIM Encoder interface
+  * @param  htim TIM Encoder Interface handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  if (htim->Encoder_MspDeInitCallback == NULL)
+  {
+    htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
+  }
+  /* DeInit the low level hardware */
+  htim->Encoder_MspDeInitCallback(htim);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Encoder_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Encoder Interface MSP.
+  * @param  htim TIM Encoder Interface handle
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Encoder Interface MSP.
+  * @param  htim TIM Encoder Interface handle
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface.
+  * @param  htim TIM Encoder Interface handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Set the TIM channel(s) state */
+  if (Channel == TIM_CHANNEL_1)
+  {
+    if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+
+  /* Enable the encoder interface channels */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      break;
+    }
+
+    default :
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      break;
+    }
+  }
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface.
+  * @param  htim TIM Encoder Interface handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+      break;
+    }
+
+    default :
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+      break;
+    }
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel(s) state */
+  if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
+  {
+    TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else
+  {
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in interrupt mode.
+  * @param  htim TIM Encoder Interface handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Set the TIM channel(s) state */
+  if (Channel == TIM_CHANNEL_1)
+  {
+    if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+        || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+
+  /* Enable the encoder interface channels */
+  /* Enable the capture compare Interrupts 1 and/or 2 */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    default :
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in interrupt mode.
+  * @param  htim TIM Encoder Interface handle
+  * @param  Channel TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  if (Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 1 */
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 2 */
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 1 and 2 */
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel(s) state */
+  if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
+  {
+    TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else
+  {
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in DMA mode.
+  * @param  htim TIM Encoder Interface handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @param  pData1 The destination Buffer address for IC1.
+  * @param  pData2 The destination Buffer address for IC2.
+  * @param  Length The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
+                                            uint32_t *pData2, uint16_t Length)
+{
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Set the TIM channel(s) state */
+  if (Channel == TIM_CHANNEL_1)
+  {
+    if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+        || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
+    {
+      return HAL_BUSY;
+    }
+    else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+             && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
+    {
+      if ((pData1 == NULL) && (Length > 0U))
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+        TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
+        || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
+    {
+      return HAL_BUSY;
+    }
+    else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
+             && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
+    {
+      if ((pData2 == NULL) && (Length > 0U))
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+        TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+  else
+  {
+    if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+        || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
+        || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+        || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
+    {
+      return HAL_BUSY;
+    }
+    else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+             && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
+             && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+             && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
+    {
+      if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U))
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+        TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+        TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+        TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Input Capture DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      break;
+    }
+
+    case TIM_CHANNEL_ALL:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in DMA mode.
+  * @param  htim TIM Encoder Interface handle
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  if (Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 1 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+  }
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 1 and 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+    (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel(s) state */
+  if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
+  {
+    TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else
+  {
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+  *  @brief    TIM IRQ handler management
+  *
+@verbatim
+  ==============================================================================
+                        ##### IRQ handler management #####
+  ==============================================================================
+  [..]
+    This section provides Timer IRQ handler function.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  This function handles TIM interrupts requests.
+  * @param  htim TIM  handle
+  * @retval None
+  */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+  /* Capture compare 1 event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET)
+    {
+      {
+        __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+        /* Input capture event */
+        if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U)
+        {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+          htim->IC_CaptureCallback(htim);
+#else
+          HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+        }
+        /* Output compare event */
+        else
+        {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+          htim->OC_DelayElapsedCallback(htim);
+          htim->PWM_PulseFinishedCallback(htim);
+#else
+          HAL_TIM_OC_DelayElapsedCallback(htim);
+          HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+        }
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+      }
+    }
+  }
+  /* Capture compare 2 event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+      /* Input capture event */
+      if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U)
+      {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+        htim->IC_CaptureCallback(htim);
+#else
+        HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+      }
+      /* Output compare event */
+      else
+      {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+        htim->OC_DelayElapsedCallback(htim);
+        htim->PWM_PulseFinishedCallback(htim);
+#else
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 3 event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+      /* Input capture event */
+      if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U)
+      {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+        htim->IC_CaptureCallback(htim);
+#else
+        HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+      }
+      /* Output compare event */
+      else
+      {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+        htim->OC_DelayElapsedCallback(htim);
+        htim->PWM_PulseFinishedCallback(htim);
+#else
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 4 event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+      /* Input capture event */
+      if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U)
+      {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+        htim->IC_CaptureCallback(htim);
+#else
+        HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+      }
+      /* Output compare event */
+      else
+      {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+        htim->OC_DelayElapsedCallback(htim);
+        htim->PWM_PulseFinishedCallback(htim);
+#else
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* TIM Update event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+      htim->PeriodElapsedCallback(htim);
+#else
+      HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+    }
+  }
+  /* TIM Break input event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+      htim->BreakCallback(htim);
+#else
+      HAL_TIMEx_BreakCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+    }
+  }
+  /* TIM Trigger detection event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+      htim->TriggerCallback(htim);
+#else
+      HAL_TIM_TriggerCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+    }
+  }
+  /* TIM commutation event */
+  if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+  {
+    if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+      htim->CommutationCallback(htim);
+#else
+      HAL_TIMEx_CommutCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions
+  *  @brief    TIM Peripheral Control functions
+  *
+@verbatim
+  ==============================================================================
+                   ##### Peripheral Control functions #####
+  ==============================================================================
+ [..]
+   This section provides functions allowing to:
+      (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+      (+) Configure External Clock source.
+      (+) Configure Complementary channels, break features and dead time.
+      (+) Configure Master and the Slave synchronization.
+      (+) Configure the DMA Burst Mode.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the TIM Output Compare Channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim TIM Output Compare handle
+  * @param  sConfig TIM Output Compare configuration structure
+  * @param  Channel TIM Channels to configure
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim,
+                                           TIM_OC_InitTypeDef *sConfig,
+                                           uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+      /* Configure the TIM Channel 1 in Output Compare */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+      /* Configure the TIM Channel 2 in Output Compare */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+      /* Configure the TIM Channel 3 in Output Compare */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+      /* Configure the TIM Channel 4 in Output Compare */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Input Capture Channels according to the specified
+  *         parameters in the TIM_IC_InitTypeDef.
+  * @param  htim TIM IC handle
+  * @param  sConfig TIM Input Capture configuration structure
+  * @param  Channel TIM Channel to configure
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  if (Channel == TIM_CHANNEL_1)
+  {
+    /* TI1 Configuration */
+    TIM_TI1_SetConfig(htim->Instance,
+                      sConfig->ICPolarity,
+                      sConfig->ICSelection,
+                      sConfig->ICFilter);
+
+    /* Reset the IC1PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+    /* Set the IC1PSC value */
+    htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    /* TI2 Configuration */
+    assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+    TIM_TI2_SetConfig(htim->Instance,
+                      sConfig->ICPolarity,
+                      sConfig->ICSelection,
+                      sConfig->ICFilter);
+
+    /* Reset the IC2PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+    /* Set the IC2PSC value */
+    htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U);
+  }
+  else if (Channel == TIM_CHANNEL_3)
+  {
+    /* TI3 Configuration */
+    assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+    TIM_TI3_SetConfig(htim->Instance,
+                      sConfig->ICPolarity,
+                      sConfig->ICSelection,
+                      sConfig->ICFilter);
+
+    /* Reset the IC3PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+    /* Set the IC3PSC value */
+    htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+  }
+  else
+  {
+    /* TI4 Configuration */
+    assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+    TIM_TI4_SetConfig(htim->Instance,
+                      sConfig->ICPolarity,
+                      sConfig->ICSelection,
+                      sConfig->ICFilter);
+
+    /* Reset the IC4PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+    /* Set the IC4PSC value */
+    htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U);
+  }
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM  channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim TIM PWM handle
+  * @param  sConfig TIM PWM configuration structure
+  * @param  Channel TIM Channels to be configured
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
+                                            TIM_OC_InitTypeDef *sConfig,
+                                            uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+      /* Configure the Channel 1 in PWM mode */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel1 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode;
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+      /* Configure the Channel 2 in PWM mode */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel2 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+      /* Configure the Channel 3 in PWM mode */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel3 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode;
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+      /* Configure the Channel 4 in PWM mode */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel4 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse Channels according to the specified
+  *         parameters in the TIM_OnePulse_InitTypeDef.
+  * @param  htim TIM One Pulse handle
+  * @param  sConfig TIM One Pulse configuration structure
+  * @param  OutputChannel TIM output channel to configure
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @param  InputChannel TIM input Channel to configure
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @note  To output a waveform with a minimum delay user can enable the fast
+  *        mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx
+  *        output is forced in response to the edge detection on TIx input,
+  *        without taking in account the comparison.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim,  TIM_OnePulse_InitTypeDef *sConfig,
+                                                 uint32_t OutputChannel,  uint32_t InputChannel)
+{
+  TIM_OC_InitTypeDef temp1;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+  assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+  if (OutputChannel != InputChannel)
+  {
+    /* Process Locked */
+    __HAL_LOCK(htim);
+
+    htim->State = HAL_TIM_STATE_BUSY;
+
+    /* Extract the Output compare configuration from sConfig structure */
+    temp1.OCMode = sConfig->OCMode;
+    temp1.Pulse = sConfig->Pulse;
+    temp1.OCPolarity = sConfig->OCPolarity;
+    temp1.OCNPolarity = sConfig->OCNPolarity;
+    temp1.OCIdleState = sConfig->OCIdleState;
+    temp1.OCNIdleState = sConfig->OCNIdleState;
+
+    switch (OutputChannel)
+    {
+      case TIM_CHANNEL_1:
+      {
+        assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+        TIM_OC1_SetConfig(htim->Instance, &temp1);
+        break;
+      }
+      case TIM_CHANNEL_2:
+      {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+        TIM_OC2_SetConfig(htim->Instance, &temp1);
+        break;
+      }
+      default:
+        break;
+    }
+
+    switch (InputChannel)
+    {
+      case TIM_CHANNEL_1:
+      {
+        assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+        TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+                          sConfig->ICSelection, sConfig->ICFilter);
+
+        /* Reset the IC1PSC Bits */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+        /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+        htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+        /* Select the Slave Mode */
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+        htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+        break;
+      }
+      case TIM_CHANNEL_2:
+      {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+        TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+                          sConfig->ICSelection, sConfig->ICFilter);
+
+        /* Reset the IC2PSC Bits */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+        /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+        htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+        /* Select the Slave Mode */
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+        htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+        break;
+      }
+
+      default:
+        break;
+    }
+
+    htim->State = HAL_TIM_STATE_READY;
+
+    __HAL_UNLOCK(htim);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+  * @param  htim TIM handle
+  * @param  BurstBaseAddress TIM Base address from where the DMA  will start the Data write
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMABASE_CR1
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT
+  *            @arg TIM_DMABASE_PSC
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  * @param  BurstRequestSrc TIM DMA Request sources
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer The Buffer address.
+  * @param  BurstLength DMA Burst length. This parameter can be one value
+  *         between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @note   This function should be used only when BurstLength is equal to DMA data transfer length.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                              uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t  BurstLength)
+{
+  return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength,
+                                          ((BurstLength) >> 8U) + 1U);
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral
+  * @param  htim TIM handle
+  * @param  BurstBaseAddress TIM Base address from where the DMA will start the Data write
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMABASE_CR1
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT
+  *            @arg TIM_DMABASE_PSC
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  * @param  BurstRequestSrc TIM DMA Request sources
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer The Buffer address.
+  * @param  BurstLength DMA Burst length. This parameter can be one value
+  *         between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @param  DataLength Data length. This parameter can be one value
+  *         between 1 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                                   uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+                                                   uint32_t  BurstLength,  uint32_t  DataLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+  assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+  if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY)
+  {
+    if ((BurstBuffer == NULL) && (BurstLength > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY;
+    }
+  }
+  else
+  {
+    /* nothing to do */
+  }
+  switch (BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      /* Set the DMA Period elapsed callbacks */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer,
+                         (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC1:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer,
+                         (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC2:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer,
+                         (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC3:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer,
+                         (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC4:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+      htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer,
+                         (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_COM:
+    {
+      /* Set the DMA commutation callbacks */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback =  TIMEx_DMACommutationCplt;
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback =  TIMEx_DMACommutationHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer,
+                         (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_TRIGGER:
+    {
+      /* Set the DMA trigger callbacks */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer,
+                         (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    default:
+      break;
+  }
+
+  /* Configure the DMA Burst Mode */
+  htim->Instance->DCR = (BurstBaseAddress | BurstLength);
+  /* Enable the TIM DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM DMA Burst mode
+  * @param  htim TIM handle
+  * @param  BurstRequestSrc TIM DMA Request sources to disable
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch (BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
+      break;
+    }
+    case TIM_DMA_CC1:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+      break;
+    }
+    case TIM_DMA_CC2:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+      break;
+    }
+    case TIM_DMA_CC3:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+      break;
+    }
+    case TIM_DMA_CC4:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+      break;
+    }
+    case TIM_DMA_COM:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+      break;
+    }
+    case TIM_DMA_TRIGGER:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]);
+      break;
+    }
+    default:
+      break;
+  }
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+  * @param  htim TIM handle
+  * @param  BurstBaseAddress TIM Base address from where the DMA  will start the Data read
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMABASE_CR1
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT
+  *            @arg TIM_DMABASE_PSC
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  * @param  BurstRequestSrc TIM DMA Request sources
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer The Buffer address.
+  * @param  BurstLength DMA Burst length. This parameter can be one value
+  *         between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @note   This function should be used only when BurstLength is equal to DMA data transfer length.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                             uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength)
+{
+  return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength,
+                                         ((BurstLength) >> 8U) + 1U);
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+  * @param  htim TIM handle
+  * @param  BurstBaseAddress TIM Base address from where the DMA  will start the Data read
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMABASE_CR1
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT
+  *            @arg TIM_DMABASE_PSC
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  * @param  BurstRequestSrc TIM DMA Request sources
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer The Buffer address.
+  * @param  BurstLength DMA Burst length. This parameter can be one value
+  *         between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @param  DataLength Data length. This parameter can be one value
+  *         between 1 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+                                                  uint32_t BurstRequestSrc, uint32_t  *BurstBuffer,
+                                                  uint32_t  BurstLength, uint32_t  DataLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+  assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+  if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY)
+  {
+    if ((BurstBuffer == NULL) && (BurstLength > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY;
+    }
+  }
+  else
+  {
+    /* nothing to do */
+  }
+  switch (BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      /* Set the DMA Period elapsed callbacks */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+                         DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC1:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+                         DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC2:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+                         DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC3:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+                         DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_CC4:
+    {
+      /* Set the DMA capture callbacks */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+      htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+                         DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_COM:
+    {
+      /* Set the DMA commutation callbacks */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback =  TIMEx_DMACommutationCplt;
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback =  TIMEx_DMACommutationHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+                         DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    case TIM_DMA_TRIGGER:
+    {
+      /* Set the DMA trigger callbacks */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+                         DataLength) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      break;
+    }
+    default:
+      break;
+  }
+
+  /* Configure the DMA Burst Mode */
+  htim->Instance->DCR = (BurstBaseAddress | BurstLength);
+
+  /* Enable the TIM DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the DMA burst reading
+  * @param  htim TIM handle
+  * @param  BurstRequestSrc TIM DMA Request sources to disable.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch (BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
+      break;
+    }
+    case TIM_DMA_CC1:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+      break;
+    }
+    case TIM_DMA_CC2:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+      break;
+    }
+    case TIM_DMA_CC3:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+      break;
+    }
+    case TIM_DMA_CC4:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+      break;
+    }
+    case TIM_DMA_COM:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+      break;
+    }
+    case TIM_DMA_TRIGGER:
+    {
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]);
+      break;
+    }
+    default:
+      break;
+  }
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Generate a software event
+  * @param  htim TIM handle
+  * @param  EventSource specifies the event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+  *            @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+  *            @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+  *            @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+  *            @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+  *            @arg TIM_EVENTSOURCE_COM: Timer COM event source
+  *            @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+  *            @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+  * @note   Basic timers can only generate an update event.
+  * @note   TIM_EVENTSOURCE_COM is relevant only with advanced timer instances.
+  * @note   TIM_EVENTSOURCE_BREAK are relevant only for timer instances
+  *         supporting a break input.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Set the event sources */
+  htim->Instance->EGR = EventSource;
+
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the OCRef clear feature
+  * @param  htim TIM handle
+  * @param  sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+  *         contains the OCREF clear feature and parameters for the TIM peripheral.
+  * @param  Channel specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1
+  *            @arg TIM_CHANNEL_2: TIM Channel 2
+  *            @arg TIM_CHANNEL_3: TIM Channel 3
+  *            @arg TIM_CHANNEL_4: TIM Channel 4
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+                                           TIM_ClearInputConfigTypeDef *sClearInputConfig,
+                                           uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  switch (sClearInputConfig->ClearInputSource)
+  {
+    case TIM_CLEARINPUTSOURCE_NONE:
+    {
+      /* Clear the OCREF clear selection bit and the the ETR Bits */
+      CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP));
+      break;
+    }
+    case TIM_CLEARINPUTSOURCE_OCREFCLR:
+    {
+      /* Clear the OCREF clear selection bit */
+      CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
+    }
+    break;
+
+    case TIM_CLEARINPUTSOURCE_ETR:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+      assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+      assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+      /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+      if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1)
+      {
+        htim->State = HAL_TIM_STATE_READY;
+        __HAL_UNLOCK(htim);
+        return HAL_ERROR;
+      }
+
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClearInputConfig->ClearInputPrescaler,
+                        sClearInputConfig->ClearInputPolarity,
+                        sClearInputConfig->ClearInputFilter);
+
+      /* Set the OCREF clear selection bit */
+      SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+      {
+        /* Enable the OCREF clear feature for Channel 1 */
+        SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE);
+      }
+      else
+      {
+        /* Disable the OCREF clear feature for Channel 1 */
+        CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE);
+      }
+      break;
+    }
+    case TIM_CHANNEL_2:
+    {
+      if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+      {
+        /* Enable the OCREF clear feature for Channel 2 */
+        SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE);
+      }
+      else
+      {
+        /* Disable the OCREF clear feature for Channel 2 */
+        CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE);
+      }
+      break;
+    }
+    case TIM_CHANNEL_3:
+    {
+      if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+      {
+        /* Enable the OCREF clear feature for Channel 3 */
+        SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE);
+      }
+      else
+      {
+        /* Disable the OCREF clear feature for Channel 3 */
+        CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE);
+      }
+      break;
+    }
+    case TIM_CHANNEL_4:
+    {
+      if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+      {
+        /* Enable the OCREF clear feature for Channel 4 */
+        SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE);
+      }
+      else
+      {
+        /* Disable the OCREF clear feature for Channel 4 */
+        CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE);
+      }
+      break;
+    }
+    default:
+      break;
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief   Configures the clock source to be used
+  * @param  htim TIM handle
+  * @param  sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that
+  *         contains the clock source information for the TIM peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig)
+{
+  uint32_t tmpsmcr;
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+  /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+  tmpsmcr = htim->Instance->SMCR;
+  tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+  htim->Instance->SMCR = tmpsmcr;
+
+  switch (sClockSourceConfig->ClockSource)
+  {
+    case TIM_CLOCKSOURCE_INTERNAL:
+    {
+      assert_param(IS_TIM_INSTANCE(htim->Instance));
+      break;
+    }
+
+    case TIM_CLOCKSOURCE_ETRMODE1:
+    {
+      /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
+      assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+
+      /* Check ETR input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClockSourceConfig->ClockPrescaler,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+
+      /* Select the External clock mode1 and the ETRF trigger */
+      tmpsmcr = htim->Instance->SMCR;
+      tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+      /* Write to TIMx SMCR */
+      htim->Instance->SMCR = tmpsmcr;
+      break;
+    }
+
+    case TIM_CLOCKSOURCE_ETRMODE2:
+    {
+      /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
+      assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
+
+      /* Check ETR input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClockSourceConfig->ClockPrescaler,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      /* Enable the External clock mode2 */
+      htim->Instance->SMCR |= TIM_SMCR_ECE;
+      break;
+    }
+
+    case TIM_CLOCKSOURCE_TI1:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+      /* Check TI1 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sClockSourceConfig->ClockPolarity,
+                               sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+      break;
+    }
+
+    case TIM_CLOCKSOURCE_TI2:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+      /* Check TI2 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                               sClockSourceConfig->ClockPolarity,
+                               sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+      break;
+    }
+
+    case TIM_CLOCKSOURCE_TI1ED:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+      /* Check TI1 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sClockSourceConfig->ClockPolarity,
+                               sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+      break;
+    }
+
+    case TIM_CLOCKSOURCE_ITR0:
+    case TIM_CLOCKSOURCE_ITR1:
+    case TIM_CLOCKSOURCE_ITR2:
+    case TIM_CLOCKSOURCE_ITR3:
+      {
+        /* Check whether or not the timer instance supports internal trigger input */
+        assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+        TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource);
+        break;
+      }
+
+    default:
+      break;
+  }
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Selects the signal connected to the TI1 input: direct from CH1_input
+  *         or a XOR combination between CH1_input, CH2_input & CH3_input
+  * @param  htim TIM handle.
+  * @param  TI1_Selection Indicate whether or not channel 1 is connected to the
+  *         output of a XOR gate.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+  *            @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+  *            pins are connected to the TI1 input (XOR combination)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+  uint32_t tmpcr2;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = htim->Instance->CR2;
+
+  /* Reset the TI1 selection */
+  tmpcr2 &= ~TIM_CR2_TI1S;
+
+  /* Set the TI1 selection */
+  tmpcr2 |= TI1_Selection;
+
+  /* Write to TIMxCR2 */
+  htim->Instance->CR2 = tmpcr2;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in Slave mode
+  * @param  htim TIM handle.
+  * @param  sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the Slave mode
+  *         (Disable, Reset, Gated, Trigger, External clock mode 1).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
+  {
+    htim->State = HAL_TIM_STATE_READY;
+    __HAL_UNLOCK(htim);
+    return HAL_ERROR;
+  }
+
+  /* Disable Trigger Interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+  /* Disable Trigger DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in Slave mode in interrupt mode
+  * @param  htim TIM handle.
+  * @param  sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the Slave mode
+  *         (Disable, Reset, Gated, Trigger, External clock mode 1).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim,
+                                                TIM_SlaveConfigTypeDef *sSlaveConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
+  {
+    htim->State = HAL_TIM_STATE_READY;
+    __HAL_UNLOCK(htim);
+    return HAL_ERROR;
+  }
+
+  /* Enable Trigger Interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+  /* Disable Trigger DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read the captured value from Capture Compare unit
+  * @param  htim TIM handle.
+  * @param  Channel TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval Captured value
+  */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpreg = 0U;
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+      /* Return the capture 1 value */
+      tmpreg =  htim->Instance->CCR1;
+
+      break;
+    }
+    case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+      /* Return the capture 2 value */
+      tmpreg =   htim->Instance->CCR2;
+
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+      /* Return the capture 3 value */
+      tmpreg =   htim->Instance->CCR3;
+
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+      /* Return the capture 4 value */
+      tmpreg =   htim->Instance->CCR4;
+
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  return tmpreg;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+  *  @brief    TIM Callbacks functions
+  *
+@verbatim
+  ==============================================================================
+                        ##### TIM Callbacks functions #####
+  ==============================================================================
+ [..]
+   This section provides TIM callback functions:
+   (+) TIM Period elapsed callback
+   (+) TIM Output Compare callback
+   (+) TIM Input capture callback
+   (+) TIM Trigger callback
+   (+) TIM Error callback
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Period elapsed callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Period elapsed half complete callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Output Compare callback in non-blocking mode
+  * @param  htim TIM OC handle
+  * @retval None
+  */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Input Capture callback in non-blocking mode
+  * @param  htim TIM IC handle
+  * @retval None
+  */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_IC_CaptureCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Input Capture half complete callback in non-blocking mode
+  * @param  htim TIM IC handle
+  * @retval None
+  */
+__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  PWM Pulse finished callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  PWM Pulse finished half complete callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Trigger detection callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_TriggerCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Trigger detection half complete callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Timer error callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIM_ErrorCallback could be implemented in the user file
+   */
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  Register a User TIM callback to be used instead of the weak predefined callback
+  * @param htim tim handle
+  * @param CallbackID ID of the callback to be registered
+  *        This parameter can be one of the following values:
+  *          @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+  *          @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+  *          @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+  *          @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+  *          @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+  *          @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+  *          @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+  *          @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+  *          @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID
+  *          @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+  *          @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID
+  *          @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+  *          @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID
+  *          @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+  *          @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+  *          @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID
+  *          @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+  *          @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+  *          @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID
+  *          @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+  *          @param pCallback pointer to the callback function
+  *          @retval status
+  */
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
+                                           pTIM_CallbackTypeDef pCallback)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if (pCallback == NULL)
+  {
+    return HAL_ERROR;
+  }
+  /* Process locked */
+  __HAL_LOCK(htim);
+
+  if (htim->State == HAL_TIM_STATE_READY)
+  {
+    switch (CallbackID)
+    {
+      case HAL_TIM_BASE_MSPINIT_CB_ID :
+        htim->Base_MspInitCallback                 = pCallback;
+        break;
+
+      case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+        htim->Base_MspDeInitCallback               = pCallback;
+        break;
+
+      case HAL_TIM_IC_MSPINIT_CB_ID :
+        htim->IC_MspInitCallback                   = pCallback;
+        break;
+
+      case HAL_TIM_IC_MSPDEINIT_CB_ID :
+        htim->IC_MspDeInitCallback                 = pCallback;
+        break;
+
+      case HAL_TIM_OC_MSPINIT_CB_ID :
+        htim->OC_MspInitCallback                   = pCallback;
+        break;
+
+      case HAL_TIM_OC_MSPDEINIT_CB_ID :
+        htim->OC_MspDeInitCallback                 = pCallback;
+        break;
+
+      case HAL_TIM_PWM_MSPINIT_CB_ID :
+        htim->PWM_MspInitCallback                  = pCallback;
+        break;
+
+      case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+        htim->PWM_MspDeInitCallback                = pCallback;
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+        htim->OnePulse_MspInitCallback             = pCallback;
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+        htim->OnePulse_MspDeInitCallback           = pCallback;
+        break;
+
+      case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+        htim->Encoder_MspInitCallback              = pCallback;
+        break;
+
+      case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+        htim->Encoder_MspDeInitCallback            = pCallback;
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+        htim->HallSensor_MspInitCallback           = pCallback;
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+        htim->HallSensor_MspDeInitCallback         = pCallback;
+        break;
+
+      case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+        htim->PeriodElapsedCallback                = pCallback;
+        break;
+
+      case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
+        htim->PeriodElapsedHalfCpltCallback        = pCallback;
+        break;
+
+      case HAL_TIM_TRIGGER_CB_ID :
+        htim->TriggerCallback                      = pCallback;
+        break;
+
+      case HAL_TIM_TRIGGER_HALF_CB_ID :
+        htim->TriggerHalfCpltCallback              = pCallback;
+        break;
+
+      case HAL_TIM_IC_CAPTURE_CB_ID :
+        htim->IC_CaptureCallback                   = pCallback;
+        break;
+
+      case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
+        htim->IC_CaptureHalfCpltCallback           = pCallback;
+        break;
+
+      case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+        htim->OC_DelayElapsedCallback              = pCallback;
+        break;
+
+      case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+        htim->PWM_PulseFinishedCallback            = pCallback;
+        break;
+
+      case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
+        htim->PWM_PulseFinishedHalfCpltCallback    = pCallback;
+        break;
+
+      case HAL_TIM_ERROR_CB_ID :
+        htim->ErrorCallback                        = pCallback;
+        break;
+
+      case HAL_TIM_COMMUTATION_CB_ID :
+        htim->CommutationCallback                  = pCallback;
+        break;
+
+      case HAL_TIM_COMMUTATION_HALF_CB_ID :
+        htim->CommutationHalfCpltCallback          = pCallback;
+        break;
+
+      case HAL_TIM_BREAK_CB_ID :
+        htim->BreakCallback                        = pCallback;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    switch (CallbackID)
+    {
+      case HAL_TIM_BASE_MSPINIT_CB_ID :
+        htim->Base_MspInitCallback         = pCallback;
+        break;
+
+      case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+        htim->Base_MspDeInitCallback       = pCallback;
+        break;
+
+      case HAL_TIM_IC_MSPINIT_CB_ID :
+        htim->IC_MspInitCallback           = pCallback;
+        break;
+
+      case HAL_TIM_IC_MSPDEINIT_CB_ID :
+        htim->IC_MspDeInitCallback         = pCallback;
+        break;
+
+      case HAL_TIM_OC_MSPINIT_CB_ID :
+        htim->OC_MspInitCallback           = pCallback;
+        break;
+
+      case HAL_TIM_OC_MSPDEINIT_CB_ID :
+        htim->OC_MspDeInitCallback         = pCallback;
+        break;
+
+      case HAL_TIM_PWM_MSPINIT_CB_ID :
+        htim->PWM_MspInitCallback          = pCallback;
+        break;
+
+      case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+        htim->PWM_MspDeInitCallback        = pCallback;
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+        htim->OnePulse_MspInitCallback     = pCallback;
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+        htim->OnePulse_MspDeInitCallback   = pCallback;
+        break;
+
+      case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+        htim->Encoder_MspInitCallback      = pCallback;
+        break;
+
+      case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+        htim->Encoder_MspDeInitCallback    = pCallback;
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+        htim->HallSensor_MspInitCallback   = pCallback;
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+        htim->HallSensor_MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return status;
+}
+
+/**
+  * @brief  Unregister a TIM callback
+  *         TIM callback is redirected to the weak predefined callback
+  * @param htim tim handle
+  * @param CallbackID ID of the callback to be unregistered
+  *        This parameter can be one of the following values:
+  *          @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+  *          @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+  *          @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+  *          @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+  *          @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+  *          @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+  *          @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+  *          @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+  *          @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+  *          @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID
+  *          @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+  *          @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID
+  *          @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+  *          @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID
+  *          @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+  *          @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+  *          @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID
+  *          @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+  *          @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+  *          @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID
+  *          @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+  *          @retval status
+  */
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process locked */
+  __HAL_LOCK(htim);
+
+  if (htim->State == HAL_TIM_STATE_READY)
+  {
+    switch (CallbackID)
+    {
+      case HAL_TIM_BASE_MSPINIT_CB_ID :
+        htim->Base_MspInitCallback              = HAL_TIM_Base_MspInit;                      /* Legacy weak Base MspInit Callback */
+        break;
+
+      case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+        htim->Base_MspDeInitCallback            = HAL_TIM_Base_MspDeInit;                    /* Legacy weak Base Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_IC_MSPINIT_CB_ID :
+        htim->IC_MspInitCallback                = HAL_TIM_IC_MspInit;                        /* Legacy weak IC Msp Init Callback */
+        break;
+
+      case HAL_TIM_IC_MSPDEINIT_CB_ID :
+        htim->IC_MspDeInitCallback              = HAL_TIM_IC_MspDeInit;                      /* Legacy weak IC Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_OC_MSPINIT_CB_ID :
+        htim->OC_MspInitCallback                = HAL_TIM_OC_MspInit;                        /* Legacy weak OC Msp Init Callback */
+        break;
+
+      case HAL_TIM_OC_MSPDEINIT_CB_ID :
+        htim->OC_MspDeInitCallback              = HAL_TIM_OC_MspDeInit;                      /* Legacy weak OC Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_PWM_MSPINIT_CB_ID :
+        htim->PWM_MspInitCallback               = HAL_TIM_PWM_MspInit;                       /* Legacy weak PWM Msp Init Callback */
+        break;
+
+      case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+        htim->PWM_MspDeInitCallback             = HAL_TIM_PWM_MspDeInit;                     /* Legacy weak PWM Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+        htim->OnePulse_MspInitCallback          = HAL_TIM_OnePulse_MspInit;                  /* Legacy weak One Pulse Msp Init Callback */
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+        htim->OnePulse_MspDeInitCallback        = HAL_TIM_OnePulse_MspDeInit;                /* Legacy weak One Pulse Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+        htim->Encoder_MspInitCallback           = HAL_TIM_Encoder_MspInit;                   /* Legacy weak Encoder Msp Init Callback */
+        break;
+
+      case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+        htim->Encoder_MspDeInitCallback         = HAL_TIM_Encoder_MspDeInit;                 /* Legacy weak Encoder Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+        htim->HallSensor_MspInitCallback        = HAL_TIMEx_HallSensor_MspInit;              /* Legacy weak Hall Sensor Msp Init Callback */
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+        htim->HallSensor_MspDeInitCallback      = HAL_TIMEx_HallSensor_MspDeInit;            /* Legacy weak Hall Sensor Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+        htim->PeriodElapsedCallback             = HAL_TIM_PeriodElapsedCallback;             /* Legacy weak Period Elapsed Callback */
+        break;
+
+      case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
+        htim->PeriodElapsedHalfCpltCallback     = HAL_TIM_PeriodElapsedHalfCpltCallback;     /* Legacy weak Period Elapsed half complete Callback */
+        break;
+
+      case HAL_TIM_TRIGGER_CB_ID :
+        htim->TriggerCallback                   = HAL_TIM_TriggerCallback;                   /* Legacy weak Trigger Callback */
+        break;
+
+      case HAL_TIM_TRIGGER_HALF_CB_ID :
+        htim->TriggerHalfCpltCallback           = HAL_TIM_TriggerHalfCpltCallback;           /* Legacy weak Trigger half complete Callback */
+        break;
+
+      case HAL_TIM_IC_CAPTURE_CB_ID :
+        htim->IC_CaptureCallback                = HAL_TIM_IC_CaptureCallback;                /* Legacy weak IC Capture Callback */
+        break;
+
+      case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
+        htim->IC_CaptureHalfCpltCallback        = HAL_TIM_IC_CaptureHalfCpltCallback;        /* Legacy weak IC Capture half complete Callback */
+        break;
+
+      case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+        htim->OC_DelayElapsedCallback           = HAL_TIM_OC_DelayElapsedCallback;           /* Legacy weak OC Delay Elapsed Callback */
+        break;
+
+      case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+        htim->PWM_PulseFinishedCallback         = HAL_TIM_PWM_PulseFinishedCallback;         /* Legacy weak PWM Pulse Finished Callback */
+        break;
+
+      case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
+        htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */
+        break;
+
+      case HAL_TIM_ERROR_CB_ID :
+        htim->ErrorCallback                     = HAL_TIM_ErrorCallback;                     /* Legacy weak Error Callback */
+        break;
+
+      case HAL_TIM_COMMUTATION_CB_ID :
+        htim->CommutationCallback               = HAL_TIMEx_CommutCallback;                  /* Legacy weak Commutation Callback */
+        break;
+
+      case HAL_TIM_COMMUTATION_HALF_CB_ID :
+        htim->CommutationHalfCpltCallback       = HAL_TIMEx_CommutHalfCpltCallback;          /* Legacy weak Commutation half complete Callback */
+        break;
+
+      case HAL_TIM_BREAK_CB_ID :
+        htim->BreakCallback                     = HAL_TIMEx_BreakCallback;                   /* Legacy weak Break Callback */
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    switch (CallbackID)
+    {
+      case HAL_TIM_BASE_MSPINIT_CB_ID :
+        htim->Base_MspInitCallback         = HAL_TIM_Base_MspInit;              /* Legacy weak Base MspInit Callback */
+        break;
+
+      case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+        htim->Base_MspDeInitCallback       = HAL_TIM_Base_MspDeInit;            /* Legacy weak Base Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_IC_MSPINIT_CB_ID :
+        htim->IC_MspInitCallback           = HAL_TIM_IC_MspInit;                /* Legacy weak IC Msp Init Callback */
+        break;
+
+      case HAL_TIM_IC_MSPDEINIT_CB_ID :
+        htim->IC_MspDeInitCallback         = HAL_TIM_IC_MspDeInit;              /* Legacy weak IC Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_OC_MSPINIT_CB_ID :
+        htim->OC_MspInitCallback           = HAL_TIM_OC_MspInit;                /* Legacy weak OC Msp Init Callback */
+        break;
+
+      case HAL_TIM_OC_MSPDEINIT_CB_ID :
+        htim->OC_MspDeInitCallback         = HAL_TIM_OC_MspDeInit;              /* Legacy weak OC Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_PWM_MSPINIT_CB_ID :
+        htim->PWM_MspInitCallback          = HAL_TIM_PWM_MspInit;               /* Legacy weak PWM Msp Init Callback */
+        break;
+
+      case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+        htim->PWM_MspDeInitCallback        = HAL_TIM_PWM_MspDeInit;             /* Legacy weak PWM Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+        htim->OnePulse_MspInitCallback     = HAL_TIM_OnePulse_MspInit;          /* Legacy weak One Pulse Msp Init Callback */
+        break;
+
+      case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+        htim->OnePulse_MspDeInitCallback   = HAL_TIM_OnePulse_MspDeInit;        /* Legacy weak One Pulse Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+        htim->Encoder_MspInitCallback      = HAL_TIM_Encoder_MspInit;           /* Legacy weak Encoder Msp Init Callback */
+        break;
+
+      case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+        htim->Encoder_MspDeInitCallback    = HAL_TIM_Encoder_MspDeInit;         /* Legacy weak Encoder Msp DeInit Callback */
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+        htim->HallSensor_MspInitCallback   = HAL_TIMEx_HallSensor_MspInit;      /* Legacy weak Hall Sensor Msp Init Callback */
+        break;
+
+      case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+        htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;    /* Legacy weak Hall Sensor Msp DeInit Callback */
+        break;
+
+      default :
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return status;
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions
+  *  @brief   TIM Peripheral State functions
+  *
+@verbatim
+  ==============================================================================
+                        ##### Peripheral State functions #####
+  ==============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the TIM Base handle state.
+  * @param  htim TIM Base handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM OC handle state.
+  * @param  htim TIM Output Compare handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM PWM handle state.
+  * @param  htim TIM handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Input Capture handle state.
+  * @param  htim TIM IC handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM One Pulse Mode handle state.
+  * @param  htim TIM OPM handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Encoder Mode handle state.
+  * @param  htim TIM Encoder Interface handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Encoder Mode handle state.
+  * @param  htim TIM handle
+  * @retval Active channel
+  */
+HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim)
+{
+  return htim->Channel;
+}
+
+/**
+  * @brief  Return actual state of the TIM channel.
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1
+  *            @arg TIM_CHANNEL_2: TIM Channel 2
+  *            @arg TIM_CHANNEL_3: TIM Channel 3
+  *            @arg TIM_CHANNEL_4: TIM Channel 4
+  *            @arg TIM_CHANNEL_5: TIM Channel 5
+  *            @arg TIM_CHANNEL_6: TIM Channel 6
+  * @retval TIM Channel state
+  */
+HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim,  uint32_t Channel)
+{
+  HAL_TIM_ChannelStateTypeDef channel_state;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+
+  return channel_state;
+}
+
+/**
+  * @brief  Return actual state of a DMA burst operation.
+  * @param  htim TIM handle
+  * @retval DMA burst state
+  */
+HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+
+  return htim->DMABurstState;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_Functions TIM Private Functions
+  * @{
+  */
+
+/**
+  * @brief  TIM DMA error callback
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+    TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else
+  {
+    htim->State = HAL_TIM_STATE_READY;
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->ErrorCallback(htim);
+#else
+  HAL_TIM_ErrorCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA Delay Pulse complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else
+  {
+    /* nothing to do */
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->PWM_PulseFinishedCallback(htim);
+#else
+  HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA Delay Pulse half complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+  else
+  {
+    /* nothing to do */
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->PWM_PulseFinishedHalfCpltCallback(htim);
+#else
+  HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA Capture complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else
+  {
+    /* nothing to do */
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->IC_CaptureCallback(htim);
+#else
+  HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA Capture half complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+  else
+  {
+    /* nothing to do */
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->IC_CaptureHalfCpltCallback(htim);
+#else
+  HAL_TIM_IC_CaptureHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA Period Elapse complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL)
+  {
+    htim->State = HAL_TIM_STATE_READY;
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->PeriodElapsedCallback(htim);
+#else
+  HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  TIM DMA Period Elapse half complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->PeriodElapsedHalfCpltCallback(htim);
+#else
+  HAL_TIM_PeriodElapsedHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  TIM DMA Trigger callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL)
+  {
+    htim->State = HAL_TIM_STATE_READY;
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->TriggerCallback(htim);
+#else
+  HAL_TIM_TriggerCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  TIM DMA Trigger half complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->TriggerHalfCpltCallback(htim);
+#else
+  HAL_TIM_TriggerHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  Time Base configuration
+  * @param  TIMx TIM peripheral
+  * @param  Structure TIM Base configuration structure
+  * @retval None
+  */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+  uint32_t tmpcr1;
+  tmpcr1 = TIMx->CR1;
+
+  /* Set TIM Time Base Unit parameters ---------------------------------------*/
+  if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
+  {
+    /* Select the Counter Mode */
+    tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+    tmpcr1 |= Structure->CounterMode;
+  }
+
+  if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
+  {
+    /* Set the clock division */
+    tmpcr1 &= ~TIM_CR1_CKD;
+    tmpcr1 |= (uint32_t)Structure->ClockDivision;
+  }
+
+  /* Set the auto-reload preload */
+  MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload);
+
+  TIMx->CR1 = tmpcr1;
+
+  /* Set the Autoreload value */
+  TIMx->ARR = (uint32_t)Structure->Period ;
+
+  /* Set the Prescaler value */
+  TIMx->PSC = Structure->Prescaler;
+
+  if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
+  {
+    /* Set the Repetition Counter value */
+    TIMx->RCR = Structure->RepetitionCounter;
+  }
+
+  /* Generate an update event to reload the Prescaler
+     and the repetition counter (only for advanced timer) value immediately */
+  TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+  * @brief  Timer Output Compare 1 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config The output configuration structure
+  * @retval None
+  */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx;
+  uint32_t tmpccer;
+  uint32_t tmpcr2;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+
+  /* Reset the Output Compare Mode Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC1M;
+  tmpccmrx &= ~TIM_CCMR1_CC1S;
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC1P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= OC_Config->OCPolarity;
+
+  if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC1NP;
+    /* Set the Output N Polarity */
+    tmpccer |= OC_Config->OCNPolarity;
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC1NE;
+  }
+
+  if (IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS1;
+    tmpcr2 &= ~TIM_CR2_OIS1N;
+    /* Set the Output Idle state */
+    tmpcr2 |= OC_Config->OCIdleState;
+    /* Set the Output N Idle state */
+    tmpcr2 |= OC_Config->OCNIdleState;
+  }
+
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR1 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Timer Output Compare 2 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config The output configuration structure
+  * @retval None
+  */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx;
+  uint32_t tmpccer;
+  uint32_t tmpcr2;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC2M;
+  tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8U);
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC2P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 4U);
+
+  if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC2NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 4U);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC2NE;
+
+  }
+
+  if (IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS2;
+    tmpcr2 &= ~TIM_CR2_OIS2N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 2U);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 2U);
+  }
+
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR2 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Timer Output Compare 3 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config The output configuration structure
+  * @retval None
+  */
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx;
+  uint32_t tmpccer;
+  uint32_t tmpcr2;
+
+  /* Disable the Channel 3: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC3M;
+  tmpccmrx &= ~TIM_CCMR2_CC3S;
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC3P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 8U);
+
+  if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC3NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 8U);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC3NE;
+  }
+
+  if (IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS3;
+    tmpcr2 &= ~TIM_CR2_OIS3N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 4U);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 4U);
+  }
+
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR3 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Timer Output Compare 4 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config The output configuration structure
+  * @retval None
+  */
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx;
+  uint32_t tmpccer;
+  uint32_t tmpcr2;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC4M;
+  tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8U);
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC4P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 12U);
+
+  if (IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output Compare IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS4;
+
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 6U);
+  }
+
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR4 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Slave Timer configuration function
+  * @param  htim TIM handle
+  * @param  sSlaveConfig Slave timer configuration
+  * @retval None
+  */
+static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                                                  TIM_SlaveConfigTypeDef *sSlaveConfig)
+{
+  uint32_t tmpsmcr;
+  uint32_t tmpccmr1;
+  uint32_t tmpccer;
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Reset the Trigger Selection Bits */
+  tmpsmcr &= ~TIM_SMCR_TS;
+  /* Set the Input Trigger source */
+  tmpsmcr |= sSlaveConfig->InputTrigger;
+
+  /* Reset the slave mode Bits */
+  tmpsmcr &= ~TIM_SMCR_SMS;
+  /* Set the slave mode */
+  tmpsmcr |= sSlaveConfig->SlaveMode;
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  /* Configure the trigger prescaler, filter, and polarity */
+  switch (sSlaveConfig->InputTrigger)
+  {
+    case TIM_TS_ETRF:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+      /* Configure the ETR Trigger source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sSlaveConfig->TriggerPrescaler,
+                        sSlaveConfig->TriggerPolarity,
+                        sSlaveConfig->TriggerFilter);
+      break;
+    }
+
+    case TIM_TS_TI1F_ED:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED)
+      {
+        return HAL_ERROR;
+      }
+
+      /* Disable the Channel 1: Reset the CC1E Bit */
+      tmpccer = htim->Instance->CCER;
+      htim->Instance->CCER &= ~TIM_CCER_CC1E;
+      tmpccmr1 = htim->Instance->CCMR1;
+
+      /* Set the filter */
+      tmpccmr1 &= ~TIM_CCMR1_IC1F;
+      tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U);
+
+      /* Write to TIMx CCMR1 and CCER registers */
+      htim->Instance->CCMR1 = tmpccmr1;
+      htim->Instance->CCER = tmpccer;
+      break;
+    }
+
+    case TIM_TS_TI1FP1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI1 Filter and Polarity */
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sSlaveConfig->TriggerPolarity,
+                               sSlaveConfig->TriggerFilter);
+      break;
+    }
+
+    case TIM_TS_TI2FP2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI2 Filter and Polarity */
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                               sSlaveConfig->TriggerPolarity,
+                               sSlaveConfig->TriggerFilter);
+      break;
+    }
+
+    case TIM_TS_ITR0:
+    case TIM_TS_ITR1:
+    case TIM_TS_ITR2:
+    case TIM_TS_ITR3:
+      {
+        /* Check the parameter */
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+        break;
+      }
+
+    default:
+      break;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the TI1 as Input.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING
+  *            @arg TIM_ICPOLARITY_FALLING
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICSelection specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1.
+  *            @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2.
+  *            @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC.
+  * @param  TIM_ICFilter Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+  *       (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+  *        protected against un-initialized filter and polarity values.
+  */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1;
+  uint32_t tmpccer;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  if (IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+  {
+    tmpccmr1 &= ~TIM_CCMR1_CC1S;
+    tmpccmr1 |= TIM_ICSelection;
+  }
+  else
+  {
+    tmpccmr1 |= TIM_CCMR1_CC1S_0;
+  }
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F);
+
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the Polarity and Filter for TI1.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING
+  *            @arg TIM_ICPOLARITY_FALLING
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICFilter Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1;
+  uint32_t tmpccer;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  tmpccer = TIMx->CCER;
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= (TIM_ICFilter << 4U);
+
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= TIM_ICPolarity;
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI2 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING
+  *            @arg TIM_ICPOLARITY_FALLING
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICSelection specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2.
+  *            @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
+  *            @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC.
+  * @param  TIM_ICFilter Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+  *       (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+  *        protected against un-initialized filter and polarity values.
+  */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                              uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1;
+  uint32_t tmpccer;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr1 &= ~TIM_CCMR1_CC2S;
+  tmpccmr1 |= (TIM_ICSelection << 8U);
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the Polarity and Filter for TI2.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING
+  *            @arg TIM_ICPOLARITY_FALLING
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICFilter Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1;
+  uint32_t tmpccer;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= (TIM_ICFilter << 12U);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= (TIM_ICPolarity << 4U);
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI3 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING
+  *            @arg TIM_ICPOLARITY_FALLING
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICSelection specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3.
+  *            @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
+  *            @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC.
+  * @param  TIM_ICFilter Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+  *       (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+  *        protected against un-initialized filter and polarity values.
+  */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                              uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2;
+  uint32_t tmpccer;
+
+  /* Disable the Channel 3: Reset the CC3E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC3S;
+  tmpccmr2 |= TIM_ICSelection;
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC3F;
+  tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F);
+
+  /* Select the Polarity and set the CC3E Bit */
+  tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+  tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI4 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING
+  *            @arg TIM_ICPOLARITY_FALLING
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICSelection specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4.
+  *            @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
+  *            @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC.
+  * @param  TIM_ICFilter Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+  *       (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+  *        protected against un-initialized filter and polarity values.
+  * @retval None
+  */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                              uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2;
+  uint32_t tmpccer;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC4S;
+  tmpccmr2 |= (TIM_ICSelection << 8U);
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC4F;
+  tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F);
+
+  /* Select the Polarity and set the CC4E Bit */
+  tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+  tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer ;
+}
+
+/**
+  * @brief  Selects the Input Trigger source
+  * @param  TIMx to select the TIM peripheral
+  * @param  InputTriggerSource The Input Trigger source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal Trigger 0
+  *            @arg TIM_TS_ITR1: Internal Trigger 1
+  *            @arg TIM_TS_ITR2: Internal Trigger 2
+  *            @arg TIM_TS_ITR3: Internal Trigger 3
+  *            @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+  *            @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+  *            @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+  *            @arg TIM_TS_ETRF: External Trigger input
+  * @retval None
+  */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource)
+{
+  uint32_t tmpsmcr;
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = TIMx->SMCR;
+  /* Reset the TS Bits */
+  tmpsmcr &= ~TIM_SMCR_TS;
+  /* Set the Input Trigger source and the slave mode*/
+  tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1);
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+}
+/**
+  * @brief  Configures the TIMx External Trigger (ETR).
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ExtTRGPrescaler The external Trigger Prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF.
+  *            @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2.
+  *            @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4.
+  *            @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8.
+  * @param  TIM_ExtTRGPolarity The external Trigger Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active.
+  *            @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active.
+  * @param  ExtTRGFilter External Trigger Filter.
+  *          This parameter must be a value between 0x00 and 0x0F
+  * @retval None
+  */
+void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
+                       uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+  uint32_t tmpsmcr;
+
+  tmpsmcr = TIMx->SMCR;
+
+  /* Reset the ETR Bits */
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+  /* Set the Prescaler, the Filter value and the Polarity */
+  tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U)));
+
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel x.
+  * @param  TIMx to select the TIM peripheral
+  * @param  Channel specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1
+  *            @arg TIM_CHANNEL_2: TIM Channel 2
+  *            @arg TIM_CHANNEL_3: TIM Channel 3
+  *            @arg TIM_CHANNEL_4: TIM Channel 4
+  * @param  ChannelState specifies the TIM Channel CCxE bit new state.
+  *          This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE.
+  * @retval None
+  */
+void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+  uint32_t tmp;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+  assert_param(IS_TIM_CHANNELS(Channel));
+
+  tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */
+
+  /* Reset the CCxE Bit */
+  TIMx->CCER &= ~tmp;
+
+  /* Set or reset the CCxE Bit */
+  TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  Reset interrupt callbacks to the legacy weak callbacks.
+  * @param  htim pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+void TIM_ResetCallback(TIM_HandleTypeDef *htim)
+{
+  /* Reset the TIM callback to the legacy weak callbacks */
+  htim->PeriodElapsedCallback             = HAL_TIM_PeriodElapsedCallback;             /* Legacy weak PeriodElapsedCallback             */
+  htim->PeriodElapsedHalfCpltCallback     = HAL_TIM_PeriodElapsedHalfCpltCallback;     /* Legacy weak PeriodElapsedHalfCpltCallback     */
+  htim->TriggerCallback                   = HAL_TIM_TriggerCallback;                   /* Legacy weak TriggerCallback                   */
+  htim->TriggerHalfCpltCallback           = HAL_TIM_TriggerHalfCpltCallback;           /* Legacy weak TriggerHalfCpltCallback           */
+  htim->IC_CaptureCallback                = HAL_TIM_IC_CaptureCallback;                /* Legacy weak IC_CaptureCallback                */
+  htim->IC_CaptureHalfCpltCallback        = HAL_TIM_IC_CaptureHalfCpltCallback;        /* Legacy weak IC_CaptureHalfCpltCallback        */
+  htim->OC_DelayElapsedCallback           = HAL_TIM_OC_DelayElapsedCallback;           /* Legacy weak OC_DelayElapsedCallback           */
+  htim->PWM_PulseFinishedCallback         = HAL_TIM_PWM_PulseFinishedCallback;         /* Legacy weak PWM_PulseFinishedCallback         */
+  htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */
+  htim->ErrorCallback                     = HAL_TIM_ErrorCallback;                     /* Legacy weak ErrorCallback                     */
+  htim->CommutationCallback               = HAL_TIMEx_CommutCallback;                  /* Legacy weak CommutationCallback               */
+  htim->CommutationHalfCpltCallback       = HAL_TIMEx_CommutHalfCpltCallback;          /* Legacy weak CommutationHalfCpltCallback       */
+  htim->BreakCallback                     = HAL_TIMEx_BreakCallback;                   /* Legacy weak BreakCallback                     */
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c
new file mode 100644
index 0000000..fe9102a
--- /dev/null
+++ b/test/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c
@@ -0,0 +1,2308 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_tim_ex.c
+  * @author  MCD Application Team
+  * @brief   TIM HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Timer Extended peripheral:
+  *           + Time Hall Sensor Interface Initialization
+  *           + Time Hall Sensor Interface Start
+  *           + Time Complementary signal break and dead time configuration
+  *           + Time Master and Slave synchronization configuration
+  *           + Time OCRef clear configuration
+  *           + Timer remapping capabilities configuration
+  @verbatim
+  ==============================================================================
+                      ##### TIMER Extended features #####
+  ==============================================================================
+  [..]
+    The Timer Extended features include:
+    (#) Complementary outputs with programmable dead-time for :
+        (++) Output Compare
+        (++) PWM generation (Edge and Center-aligned Mode)
+        (++) One-pulse mode output
+    (#) Synchronization circuit to control the timer with external signals and to
+        interconnect several timers together.
+    (#) Break input to put the timer output signals in reset state or in a known state.
+    (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+        positioning purposes
+
+            ##### How to use this driver #####
+  ==============================================================================
+    [..]
+     (#) Initialize the TIM low level resources by implementing the following functions
+         depending on the selected feature:
+           (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit()
+
+     (#) Initialize the TIM low level resources :
+        (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+        (##) TIM pins configuration
+            (+++) Enable the clock for the TIM GPIOs using the following function:
+              __HAL_RCC_GPIOx_CLK_ENABLE();
+            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+     (#) The external Clock can be configured, if needed (the default clock is the
+         internal clock from the APBx), using the following function:
+         HAL_TIM_ConfigClockSource, the clock configuration should be done before
+         any start function.
+
+     (#) Configure the TIM in the desired functioning mode using one of the
+         initialization function of this driver:
+          (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the
+               Timer Hall Sensor Interface and the commutation event with the corresponding
+               Interrupt and DMA request if needed (Note that One Timer is used to interface
+               with the Hall sensor Interface and another Timer should be used to use
+               the commutation event).
+
+     (#) Activate the TIM peripheral using one of the start functions:
+           (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT()
+           (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+           (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+           (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * 
© Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.

+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup TIMEx TIMEx
+  * @brief TIM Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma);
+static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState);
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+  * @brief    Timer Hall Sensor functions
+  *
+@verbatim
+  ==============================================================================
+                      ##### Timer Hall Sensor functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure TIM HAL Sensor.
+    (+) De-initialize TIM HAL Sensor.
+    (+) Start the Hall Sensor Interface.
+    (+) Stop the Hall Sensor Interface.
+    (+) Start the Hall Sensor Interface and enable interrupts.
+    (+) Stop the Hall Sensor Interface and disable interrupts.
+    (+) Start the Hall Sensor Interface and enable DMA transfers.
+    (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Hall Sensor Interface and initialize the associated handle.
+  * @note   When the timer instance is initialized in Hall Sensor Interface mode,
+  *         timer channels 1 and channel 2 are reserved and cannot be used for
+  *         other purpose.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @param  sConfig TIM Hall Sensor configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig)
+{
+  TIM_OC_InitTypeDef OC_Config;
+
+  /* Check the TIM handle allocation */
+  if (htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+  if (htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+    /* Reset interrupt callbacks to legacy week callbacks */
+    TIM_ResetCallback(htim);
+
+    if (htim->HallSensor_MspInitCallback == NULL)
+    {
+      htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
+    }
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    htim->HallSensor_MspInitCallback(htim);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIMEx_HallSensor_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+  }
+
+  /* Set the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Configure the Time base in the Encoder Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the  Hall sensor */
+  TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+  /* Reset the IC1PSC Bits */
+  htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+  /* Set the IC1PSC value */
+  htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+  /* Enable the Hall sensor interface (XOR function of the three inputs) */
+  htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+  /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+  htim->Instance->SMCR &= ~TIM_SMCR_TS;
+  htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+  /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+  htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+  htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+  /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+  OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+  OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+  OC_Config.OCMode = TIM_OCMODE_PWM2;
+  OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+  OC_Config.Pulse = sConfig->Commutation_Delay;
+
+  TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+  /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+    register to 101 */
+  htim->Instance->CR2 &= ~TIM_CR2_MMS;
+  htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+  /* Initialize the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+  /* Initialize the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Initialize the TIM state*/
+  htim->State = HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Hall Sensor interface
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  if (htim->HallSensor_MspDeInitCallback == NULL)
+  {
+    htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
+  }
+  /* DeInit the low level hardware */
+  htim->HallSensor_MspDeInitCallback(htim);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIMEx_HallSensor_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  /* Change the DMA burst operation state */
+  htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+  /* Change the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Hall Sensor MSP.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval None
+  */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Hall Sensor MSP.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval None
+  */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+  uint32_t tmpsmcr;
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Check the TIM channels state */
+  if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the Input Capture channel 1
+  (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall sensor Interface.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1, 2 and 3
+    (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface in interrupt mode.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+  uint32_t tmpsmcr;
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Check the TIM channels state */
+  if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the capture compare Interrupts 1 event */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+  /* Enable the Input Capture channel 1
+    (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall Sensor Interface in interrupt mode.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channel 1
+    (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+  /* Disable the capture compare Interrupts event */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface in DMA mode.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @param  pData The destination Buffer address.
+  * @param  Length The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+  uint32_t tmpsmcr;
+  HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+  HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Set the TIM channel state */
+  if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+      || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
+  {
+    return HAL_BUSY;
+  }
+  else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+           && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
+  {
+    if ((pData == NULL) && (Length > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  /* Enable the Input Capture channel 1
+    (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+  /* Set the DMA Input Capture 1 Callbacks */
+  htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+  htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+  /* Enable the DMA channel for Capture 1*/
+  if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK)
+  {
+    /* Return error status */
+    return HAL_ERROR;
+  }
+  /* Enable the capture compare 1 Interrupt */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall Sensor Interface in DMA mode.
+  * @param  htim TIM Hall Sensor Interface handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channel 1
+    (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+  /* Disable the capture compare Interrupts 1 event */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+  (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM channel state */
+  TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+  *  @brief   Timer Complementary Output Compare functions
+  *
+@verbatim
+  ==============================================================================
+              ##### Timer Complementary Output Compare functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Start the Complementary Output Compare/PWM.
+    (+) Stop the Complementary Output Compare/PWM.
+    (+) Start the Complementary Output Compare/PWM and enable interrupts.
+    (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+    (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+    (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation on the complementary
+  *         output.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM complementary channel state */
+  if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation on the complementary
+  *         output.
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in interrupt mode
+  *         on the complementary output.
+  * @param  htim TIM OC handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM complementary channel state */
+  if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+
+    default:
+      break;
+  }
+
+  /* Enable the TIM Break interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+  /* Enable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in interrupt mode
+  *         on the complementary output.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpccer;
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the TIM Break interrupt (only if no more channel is active) */
+  tmpccer = htim->Instance->CCER;
+  if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET)
+  {
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+  }
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in DMA mode
+  *         on the complementary output.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @param  pData The source Buffer address.
+  * @param  Length The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Set the TIM complementary channel state */
+  if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+  {
+    if ((pData == NULL) && (Length > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+      htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in DMA mode
+  *         on the complementary output.
+  * @param  htim TIM Output Compare handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+  * @brief    Timer Complementary PWM functions
+  *
+@verbatim
+  ==============================================================================
+                 ##### Timer Complementary PWM functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Start the Complementary PWM.
+    (+) Stop the Complementary PWM.
+    (+) Start the Complementary PWM and enable interrupts.
+    (+) Stop the Complementary PWM and disable interrupts.
+    (+) Start the Complementary PWM and enable DMA transfers.
+    (+) Stop the Complementary PWM and disable DMA transfers.
+    (+) Start the Complementary Input Capture measurement.
+    (+) Stop the Complementary Input Capture.
+    (+) Start the Complementary Input Capture and enable interrupts.
+    (+) Stop the Complementary Input Capture and disable interrupts.
+    (+) Start the Complementary Input Capture and enable DMA transfers.
+    (+) Stop the Complementary Input Capture and disable DMA transfers.
+    (+) Start the Complementary One Pulse generation.
+    (+) Stop the Complementary One Pulse.
+    (+) Start the Complementary One Pulse and enable interrupts.
+    (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the PWM signal generation on the complementary output.
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM complementary channel state */
+  if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation on the complementary output.
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the PWM signal generation in interrupt mode on the
+  *         complementary output.
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Check the TIM complementary channel state */
+  if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the TIM Break interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+  /* Enable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation in interrupt mode on the
+  *         complementary output.
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpccer;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the TIM Break interrupt (only if no more channel is active) */
+  tmpccer = htim->Instance->CCER;
+  if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET)
+  {
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+  }
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM PWM signal generation in DMA mode on the
+  *         complementary output
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @param  pData The source Buffer address.
+  * @param  Length The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Set the TIM complementary channel state */
+  if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+  {
+    if ((pData == NULL) && (Length > 0U))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+      htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+      htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA compare callbacks */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+      htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+      /* Enable the DMA channel */
+      if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+      {
+        /* Return error status */
+        return HAL_ERROR;
+      }
+      /* Enable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Enable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+    if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+    {
+      __HAL_TIM_ENABLE(htim);
+    }
+  }
+  else
+  {
+    __HAL_TIM_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM PWM signal generation in DMA mode on the complementary
+  *         output
+  * @param  htim TIM handle
+  * @param  Channel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+      break;
+    }
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+      (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+      break;
+    }
+
+    default:
+      break;
+  }
+
+  /* Disable the complementary PWM output */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM complementary channel state */
+  TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+  * @brief    Timer Complementary One Pulse functions
+  *
+@verbatim
+  ==============================================================================
+                ##### Timer Complementary One Pulse functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Start the Complementary One Pulse generation.
+    (+) Stop the Complementary One Pulse.
+    (+) Start the Complementary One Pulse and enable interrupts.
+    (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation on the complementary
+  *         output.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+  HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
+  HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Check the TIM channels state */
+  if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the complementary One Pulse output channel and the Input Capture channel */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation on the complementary
+  *         output.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Disable the complementary One Pulse output channel and the Input Capture channel */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM  channels state */
+  TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation in interrupt mode on the
+  *         complementary channel.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+  HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
+  HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Check the TIM channels state */
+  if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
+      || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Set the TIM channels state */
+  TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
+  TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+  /* Enable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+  /* Enable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+  /* Enable the complementary One Pulse output channel and the Input Capture channel */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation in interrupt mode on the
+  *         complementary channel.
+  * @param  htim TIM One Pulse handle
+  * @param  OutputChannel TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Disable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+  /* Disable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+  /* Disable the complementary One Pulse output channel and the Input Capture channel */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Set the TIM  channels state */
+  TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
+  TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+  * @brief    Peripheral Control functions
+  *
+@verbatim
+  ==============================================================================
+                    ##### Peripheral Control functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+      (+) Configure the commutation event in case of use of the Hall sensor interface.
+      (+) Configure Output channels for OC and PWM mode.
+
+      (+) Configure Complementary channels, break features and dead time.
+      (+) Configure Master synchronization.
+      (+) Configure timer remapping capabilities.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure the TIM commutation event sequence.
+  * @note  This function is mandatory to use the commutation event in order to
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer)
+  *        configured in Hall sensor interface, this interface Timer will generate the
+  *        commutation at its TRGO output (connected to Timer used in this function) each time
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @param  htim TIM handle
+  * @param  InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource the Commutation Event source
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                              uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+
+  /* Disable Commutation Interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM);
+
+  /* Disable Commutation DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM);
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the TIM commutation event sequence with interrupt.
+  * @note  This function is mandatory to use the commutation event in order to
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer)
+  *        configured in Hall sensor interface, this interface Timer will generate the
+  *        commutation at its TRGO output (connected to Timer used in this function) each time
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @param  htim TIM handle
+  * @param  InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource the Commutation Event source
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                 uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+
+  /* Disable Commutation DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM);
+
+  /* Enable the Commutation Interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the TIM commutation event sequence with DMA.
+  * @note  This function is mandatory to use the commutation event in order to
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer)
+  *        configured in Hall sensor interface, this interface Timer will generate the
+  *        commutation at its TRGO output (connected to Timer used in this function) each time
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @note  The user should configure the DMA in his own software, in This function only the COMDE bit is set
+  * @param  htim TIM handle
+  * @param  InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource the Commutation Event source
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                  uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+
+  /* Enable the Commutation DMA Request */
+  /* Set the DMA Commutation Callback */
+  htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+  htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt;
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
+
+  /* Disable Commutation Interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM);
+
+  /* Enable the Commutation DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in master mode.
+  * @param  htim TIM handle.
+  * @param  sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+  *         contains the selected trigger output (TRGO) and the Master/Slave
+  *         mode.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+                                                        TIM_MasterConfigTypeDef *sMasterConfig)
+{
+  uint32_t tmpcr2;
+  uint32_t tmpsmcr;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+  assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+  /* Check input state */
+  __HAL_LOCK(htim);
+
+  /* Change the handler state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = htim->Instance->CR2;
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Reset the MMS Bits */
+  tmpcr2 &= ~TIM_CR2_MMS;
+  /* Select the TRGO source */
+  tmpcr2 |=  sMasterConfig->MasterOutputTrigger;
+
+  /* Update TIMx CR2 */
+  htim->Instance->CR2 = tmpcr2;
+
+  if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+  {
+    /* Reset the MSM Bit */
+    tmpsmcr &= ~TIM_SMCR_MSM;
+    /* Set master mode */
+    tmpsmcr |= sMasterConfig->MasterSlaveMode;
+
+    /* Update TIMx SMCR */
+    htim->Instance->SMCR = tmpsmcr;
+  }
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+  *         and the AOE(automatic output enable).
+  * @param  htim TIM handle
+  * @param  sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
+  *         contains the BDTR Register configuration  information for the TIM peripheral.
+  * @note   Interrupts can be generated when an active level is detected on the
+  *         break input, the break 2 input or the system break input. Break
+  *         interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+                                                TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig)
+{
+  /* Keep this variable initialized to 0 as it is used to configure BDTR register */
+  uint32_t tmpbdtr = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+  assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+  assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+  assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+  assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+  assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+  assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+
+  /* Check input state */
+  __HAL_LOCK(htim);
+
+  /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+     the OSSI State, the dead time value and the Automatic Output Enable Bit */
+
+  /* Set the BDTR bits */
+  MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+  MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+  MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+  MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+  MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+  MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+  MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+
+
+  /* Set TIMx_BDTR */
+  htim->Instance->BDTR = tmpbdtr;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIMx Remapping input capabilities.
+  * @param  htim TIM handle.
+  * @param  Remap specifies the TIM remapping source.
+  *         For TIM14, the parameter can have the following values:
+  *           @arg TIM_TIM14_GPIO:    TIM14 TI1 is connected to GPIO
+  *           @arg TIM_TIM14_RTC:     TIM14 TI1 is connected to RTC_clock
+  *           @arg TIM_TIM14_HSE:     TIM14 TI1 is connected to HSE/32
+  *           @arg TIM_TIM14_MCO:     TIM14 TI1 is connected to MCO
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+  __HAL_LOCK(htim);
+
+  /* Check parameters */
+  assert_param(IS_TIM_REMAP(htim->Instance, Remap));
+
+  /* Set the Timer remapping configuration */
+  WRITE_REG(htim->Instance->OR, Remap);
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+  * @brief    Extended Callbacks functions
+  *
+@verbatim
+  ==============================================================================
+                    ##### Extended Callbacks functions #####
+  ==============================================================================
+  [..]
+    This section provides Extended TIM callback functions:
+    (+) Timer Commutation callback
+    (+) Timer Break callback
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Hall commutation changed callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIMEx_CommutCallback could be implemented in the user file
+   */
+}
+/**
+  * @brief  Hall commutation changed half complete callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Break detection callback in non-blocking mode
+  * @param  htim TIM handle
+  * @retval None
+  */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_TIMEx_BreakCallback could be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+  * @brief    Extended Peripheral State functions
+  *
+@verbatim
+  ==============================================================================
+                ##### Extended Peripheral State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the TIM Hall Sensor interface handle state.
+  * @param  htim TIM Hall Sensor handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return actual state of the TIM complementary channel.
+  * @param  htim TIM handle
+  * @param  ChannelN TIM Complementary channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1
+  *            @arg TIM_CHANNEL_2: TIM Channel 2
+  *            @arg TIM_CHANNEL_3: TIM Channel 3
+  * @retval TIM Complementary channel state
+  */
+HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim,  uint32_t ChannelN)
+{
+  HAL_TIM_ChannelStateTypeDef channel_state;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN));
+
+  channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN);
+
+  return channel_state;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+  * @{
+  */
+
+/**
+  * @brief  TIM DMA Commutation callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->CommutationCallback(htim);
+#else
+  HAL_TIMEx_CommutCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  TIM DMA Commutation half complete callback.
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->CommutationHalfCpltCallback(htim);
+#else
+  HAL_TIMEx_CommutHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+
+/**
+  * @brief  TIM DMA Delay Pulse complete callback (complementary channel).
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+
+    if (hdma->Init.Mode == DMA_NORMAL)
+    {
+      TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+    }
+  }
+  else
+  {
+    /* nothing to do */
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->PWM_PulseFinishedCallback(htim);
+#else
+  HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA error callback (complementary channel)
+  * @param  hdma pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+    TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+  }
+  else
+  {
+    /* nothing to do */
+  }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+  htim->ErrorCallback(htim);
+#else
+  HAL_TIM_ErrorCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel xN.
+  * @param  TIMx to select the TIM peripheral
+  * @param  Channel specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1
+  *            @arg TIM_CHANNEL_2: TIM Channel 2
+  *            @arg TIM_CHANNEL_3: TIM Channel 3
+  * @param  ChannelNState specifies the TIM Channel CCxNE bit new state.
+  *          This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+  * @retval None
+  */
+static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+  uint32_t tmp;
+
+  tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */
+
+  /* Reset the CCxNE Bit */
+  TIMx->CCER &=  ~tmp;
+
+  /* Set or reset the CCxNE Bit */
+  TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */
+}
+/**
+  * @}
+  */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/test/STM32F030F4PX_FLASH.ld b/test/STM32F030F4PX_FLASH.ld
new file mode 100644
index 0000000..a01602f
--- /dev/null
+++ b/test/STM32F030F4PX_FLASH.ld
@@ -0,0 +1,177 @@
+/**
+ ******************************************************************************
+ * @file      LinkerScript.ld
+ * @author    Auto-generated by STM32CubeIDE
+ * @brief     Linker script for STM32F030F4Px Device from STM32F0 series
+ *                      16Kbytes FLASH
+ *                      4Kbytes RAM
+ *
+ *            Set heap size, stack size and stack location according
+ *            to application requirements.
+ *
+ *            Set memory bank area and size if external memory is used
+ ******************************************************************************
+ * @attention
+ *
+ * 
© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.

+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM);	/* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200;	/* required amount of heap  */
+_Min_Stack_Size = 0x400;	/* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+  RAM    (xrw)    : ORIGIN = 0x20000000,   LENGTH = 4K
+  FLASH    (rx)    : ORIGIN = 0x8000000,   LENGTH = 16K
+}
+
+/* Sections */
+SECTIONS
+{
+  /* The startup code into "FLASH" Rom type memory */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data into "FLASH" Rom type memory */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data into "FLASH" Rom type memory */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : {
+    . = ALIGN(4);
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM : {
+    . = ALIGN(4);
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+    . = ALIGN(4);
+  } >FLASH
+
+  .preinit_array     :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  .init_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  .fini_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  /* Used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections into "RAM" Ram type memory */
+  .data :
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+    *(.RamFunc)        /* .RamFunc sections */
+    *(.RamFunc*)       /* .RamFunc* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+
+  } >RAM AT> FLASH
+
+  /* Uninitialized data section into "RAM" Ram type memory */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough "RAM" Ram  type memory left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  /* Remove information from the compiler libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/test/test Debug.launch b/test/test Debug.launch
new file mode 100644
index 0000000..7f3d2ce
--- /dev/null
+++ b/test/test Debug.launch	
@@ -0,0 +1,73 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/test/test.ioc b/test/test.ioc
new file mode 100644
index 0000000..10e757b
--- /dev/null
+++ b/test/test.ioc
@@ -0,0 +1,60 @@
+#MicroXplorer Configuration settings - do not modify
+File.Version=6
+KeepUserPlacement=false
+Mcu.Family=STM32F0
+Mcu.IP0=NVIC
+Mcu.IP1=RCC
+Mcu.IP2=SYS
+Mcu.IPNb=3
+Mcu.Name=STM32F030F4Px
+Mcu.Package=TSSOP20
+Mcu.Pin0=VP_SYS_VS_Systick
+Mcu.PinsNb=1
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F030F4Px
+MxCube.Version=6.1.0
+MxDb.Version=DB.6.0.10
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F030F4Px
+ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.2
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.MainLocation=Core/Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=test.ioc
+ProjectManager.ProjectName=test
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=STM32CubeIDE
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false
+RCC.FamilyName=M
+RCC.IPParameters=FamilyName,PLLCLKFreq_Value,TimSysFreq_Value
+RCC.PLLCLKFreq_Value=8000000
+RCC.TimSysFreq_Value=8000000
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=custom
+isbadioc=false